regulator: build: Sort Kconfig
Reduces merge issues if nothing else. Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Mark Brown
parent
ad81f0545e
commit
82b736df4d
|
|
@ -64,15 +64,11 @@ config REGULATOR_USERSPACE_CONSUMER
|
|||
|
||||
If unsure, say no.
|
||||
|
||||
config REGULATOR_GPIO
|
||||
tristate "GPIO regulator support"
|
||||
depends on GPIOLIB
|
||||
config REGULATOR_88PM8607
|
||||
bool "Marvell 88PM8607 Power regulators"
|
||||
depends on MFD_88PM860X=y
|
||||
help
|
||||
This driver provides support for regulators that can be
|
||||
controlled via gpios.
|
||||
It is capable of supporting current and voltage regulators
|
||||
and the platform has to provide a mapping of GPIO-states
|
||||
to target volts/amps.
|
||||
This driver supports 88PM8607 voltage regulator chips.
|
||||
|
||||
config REGULATOR_AD5398
|
||||
tristate "Analog Devices AD5398/AD5821 regulators"
|
||||
|
|
@ -81,6 +77,14 @@ config REGULATOR_AD5398
|
|||
This driver supports AD5398 and AD5821 current regulator chips.
|
||||
If building into module, its name is ad5398.ko.
|
||||
|
||||
config REGULATOR_ANATOP
|
||||
tristate "Freescale i.MX on-chip ANATOP LDO regulators"
|
||||
depends on MFD_SYSCON
|
||||
help
|
||||
Say y here to support Freescale i.MX on-chip ANATOP LDOs
|
||||
regulators. It is recommended that this option be
|
||||
enabled on i.MX6 platform.
|
||||
|
||||
config REGULATOR_AAT2870
|
||||
tristate "AnalogicTech AAT2870 Regulators"
|
||||
depends on MFD_AAT2870_CORE
|
||||
|
|
@ -88,6 +92,22 @@ config REGULATOR_AAT2870
|
|||
If you have a AnalogicTech AAT2870 say Y to enable the
|
||||
regulator driver.
|
||||
|
||||
config REGULATOR_AB3100
|
||||
tristate "ST-Ericsson AB3100 Regulator functions"
|
||||
depends on AB3100_CORE
|
||||
default y if AB3100_CORE
|
||||
help
|
||||
These regulators correspond to functionality in the
|
||||
AB3100 analog baseband dealing with power regulators
|
||||
for the system.
|
||||
|
||||
config REGULATOR_AB8500
|
||||
bool "ST-Ericsson AB8500 Power Regulators"
|
||||
depends on AB8500_CORE
|
||||
help
|
||||
This driver supports the regulators found on the ST-Ericsson mixed
|
||||
signal AB8500 PMIC
|
||||
|
||||
config REGULATOR_ARIZONA
|
||||
tristate "Wolfson Arizona class devices"
|
||||
depends on MFD_ARIZONA
|
||||
|
|
@ -96,6 +116,13 @@ config REGULATOR_ARIZONA
|
|||
Support for the regulators found on Wolfson Arizona class
|
||||
devices.
|
||||
|
||||
config REGULATOR_AS3711
|
||||
tristate "AS3711 PMIC"
|
||||
depends on MFD_AS3711
|
||||
help
|
||||
This driver provides support for the voltage regulators on the
|
||||
AS3711 PMIC
|
||||
|
||||
config REGULATOR_DA903X
|
||||
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
|
||||
depends on PMIC_DA903X
|
||||
|
|
@ -120,6 +147,17 @@ config REGULATOR_DA9055
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called da9055-regulator.
|
||||
|
||||
config REGULATOR_DBX500_PRCMU
|
||||
bool
|
||||
|
||||
config REGULATOR_DB8500_PRCMU
|
||||
bool "ST-Ericsson DB8500 Voltage Domain Regulators"
|
||||
depends on MFD_DB8500_PRCMU
|
||||
select REGULATOR_DBX500_PRCMU
|
||||
help
|
||||
This driver supports the voltage domain regulators controlled by the
|
||||
DB8500 PRCMU
|
||||
|
||||
config REGULATOR_FAN53555
|
||||
tristate "Fairchild FAN53555 Regulator"
|
||||
depends on I2C
|
||||
|
|
@ -131,32 +169,15 @@ config REGULATOR_FAN53555
|
|||
input voltage supply of 2.5V to 5.5V. The output voltage is
|
||||
programmed through an I2C interface.
|
||||
|
||||
config REGULATOR_ANATOP
|
||||
tristate "Freescale i.MX on-chip ANATOP LDO regulators"
|
||||
depends on MFD_SYSCON
|
||||
config REGULATOR_GPIO
|
||||
tristate "GPIO regulator support"
|
||||
depends on GPIOLIB
|
||||
help
|
||||
Say y here to support Freescale i.MX on-chip ANATOP LDOs
|
||||
regulators. It is recommended that this option be
|
||||
enabled on i.MX6 platform.
|
||||
|
||||
config REGULATOR_MC13XXX_CORE
|
||||
tristate
|
||||
|
||||
config REGULATOR_MC13783
|
||||
tristate "Freescale MC13783 regulator driver"
|
||||
depends on MFD_MC13783
|
||||
select REGULATOR_MC13XXX_CORE
|
||||
help
|
||||
Say y here to support the regulators found on the Freescale MC13783
|
||||
PMIC.
|
||||
|
||||
config REGULATOR_MC13892
|
||||
tristate "Freescale MC13892 regulator driver"
|
||||
depends on MFD_MC13XXX
|
||||
select REGULATOR_MC13XXX_CORE
|
||||
help
|
||||
Say y here to support the regulators found on the Freescale MC13892
|
||||
PMIC.
|
||||
This driver provides support for regulators that can be
|
||||
controlled via gpios.
|
||||
It is capable of supporting current and voltage regulators
|
||||
and the platform has to provide a mapping of GPIO-states
|
||||
to target volts/amps.
|
||||
|
||||
config REGULATOR_ISL6271A
|
||||
tristate "Intersil ISL6271A Power regulator"
|
||||
|
|
@ -164,11 +185,41 @@ config REGULATOR_ISL6271A
|
|||
help
|
||||
This driver supports ISL6271A voltage regulator chip.
|
||||
|
||||
config REGULATOR_88PM8607
|
||||
bool "Marvell 88PM8607 Power regulators"
|
||||
depends on MFD_88PM860X=y
|
||||
config REGULATOR_LP3971
|
||||
tristate "National Semiconductors LP3971 PMIC regulator driver"
|
||||
depends on I2C
|
||||
help
|
||||
This driver supports 88PM8607 voltage regulator chips.
|
||||
Say Y here to support the voltage regulators and convertors
|
||||
on National Semiconductors LP3971 PMIC
|
||||
|
||||
config REGULATOR_LP3972
|
||||
tristate "National Semiconductors LP3972 PMIC regulator driver"
|
||||
depends on I2C
|
||||
help
|
||||
Say Y here to support the voltage regulators and convertors
|
||||
on National Semiconductors LP3972 PMIC
|
||||
|
||||
config REGULATOR_LP872X
|
||||
bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
|
||||
depends on I2C=y
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This driver supports LP8720/LP8725 PMIC
|
||||
|
||||
config REGULATOR_LP8755
|
||||
tristate "TI LP8755 High Performance PMU driver"
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This driver supports LP8755 High Performance PMU driver. This
|
||||
chip contains six step-down DC/DC converters which can support
|
||||
9 mode multiphase configuration.
|
||||
|
||||
config REGULATOR_LP8788
|
||||
bool "TI LP8788 Power Regulators"
|
||||
depends on MFD_LP8788
|
||||
help
|
||||
This driver supports LP8788 voltage regulator chip.
|
||||
|
||||
config REGULATOR_MAX1586
|
||||
tristate "Maxim 1586/1587 voltage regulator"
|
||||
|
|
@ -259,6 +310,37 @@ config REGULATOR_MAX77693
|
|||
and one current regulator 'CHARGER'. This is suitable for
|
||||
Exynos-4x12 chips.
|
||||
|
||||
config REGULATOR_MC13XXX_CORE
|
||||
tristate
|
||||
|
||||
config REGULATOR_MC13783
|
||||
tristate "Freescale MC13783 regulator driver"
|
||||
depends on MFD_MC13783
|
||||
select REGULATOR_MC13XXX_CORE
|
||||
help
|
||||
Say y here to support the regulators found on the Freescale MC13783
|
||||
PMIC.
|
||||
|
||||
config REGULATOR_MC13892
|
||||
tristate "Freescale MC13892 regulator driver"
|
||||
depends on MFD_MC13XXX
|
||||
select REGULATOR_MC13XXX_CORE
|
||||
help
|
||||
Say y here to support the regulators found on the Freescale MC13892
|
||||
PMIC.
|
||||
|
||||
config REGULATOR_PALMAS
|
||||
tristate "TI Palmas PMIC Regulators"
|
||||
depends on MFD_PALMAS
|
||||
help
|
||||
If you wish to control the regulators on the Palmas series of
|
||||
chips say Y here. This will enable support for all the software
|
||||
controllable SMPS/LDO regulators.
|
||||
|
||||
The regulators available on Palmas series chips vary depending
|
||||
on the muxing. This is handled automatically in the driver by
|
||||
reading the mux info from OTP.
|
||||
|
||||
config REGULATOR_PCAP
|
||||
tristate "Motorola PCAP2 regulator driver"
|
||||
depends on EZX_PCAP
|
||||
|
|
@ -266,42 +348,6 @@ config REGULATOR_PCAP
|
|||
This driver provides support for the voltage regulators of the
|
||||
PCAP2 PMIC.
|
||||
|
||||
config REGULATOR_LP3971
|
||||
tristate "National Semiconductors LP3971 PMIC regulator driver"
|
||||
depends on I2C
|
||||
help
|
||||
Say Y here to support the voltage regulators and convertors
|
||||
on National Semiconductors LP3971 PMIC
|
||||
|
||||
config REGULATOR_LP3972
|
||||
tristate "National Semiconductors LP3972 PMIC regulator driver"
|
||||
depends on I2C
|
||||
help
|
||||
Say Y here to support the voltage regulators and convertors
|
||||
on National Semiconductors LP3972 PMIC
|
||||
|
||||
config REGULATOR_LP872X
|
||||
bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
|
||||
depends on I2C=y
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This driver supports LP8720/LP8725 PMIC
|
||||
|
||||
config REGULATOR_LP8755
|
||||
tristate "TI LP8755 High Performance PMU driver"
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This driver supports LP8755 High Performance PMU driver. This
|
||||
chip contains six step-down DC/DC converters which can support
|
||||
9 mode multiphase configuration.
|
||||
|
||||
config REGULATOR_LP8788
|
||||
bool "TI LP8788 Power Regulators"
|
||||
depends on MFD_LP8788
|
||||
help
|
||||
This driver supports LP8788 voltage regulator chip.
|
||||
|
||||
config REGULATOR_PCF50633
|
||||
tristate "NXP PCF50633 regulator driver"
|
||||
depends on MFD_PCF50633
|
||||
|
|
@ -335,44 +381,15 @@ config REGULATOR_S5M8767
|
|||
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
|
||||
supports DVS mode with 8bits of output voltage control.
|
||||
|
||||
config REGULATOR_AB3100
|
||||
tristate "ST-Ericsson AB3100 Regulator functions"
|
||||
depends on AB3100_CORE
|
||||
default y if AB3100_CORE
|
||||
config REGULATOR_TI_ABB
|
||||
bool "TI Adaptive Body Bias on-chip LDO"
|
||||
depends on ARCH_OMAP
|
||||
help
|
||||
These regulators correspond to functionality in the
|
||||
AB3100 analog baseband dealing with power regulators
|
||||
for the system.
|
||||
|
||||
config REGULATOR_AB8500
|
||||
bool "ST-Ericsson AB8500 Power Regulators"
|
||||
depends on AB8500_CORE
|
||||
help
|
||||
This driver supports the regulators found on the ST-Ericsson mixed
|
||||
signal AB8500 PMIC
|
||||
|
||||
config REGULATOR_DBX500_PRCMU
|
||||
bool
|
||||
|
||||
config REGULATOR_DB8500_PRCMU
|
||||
bool "ST-Ericsson DB8500 Voltage Domain Regulators"
|
||||
depends on MFD_DB8500_PRCMU
|
||||
select REGULATOR_DBX500_PRCMU
|
||||
help
|
||||
This driver supports the voltage domain regulators controlled by the
|
||||
DB8500 PRCMU
|
||||
|
||||
config REGULATOR_PALMAS
|
||||
tristate "TI Palmas PMIC Regulators"
|
||||
depends on MFD_PALMAS
|
||||
help
|
||||
If you wish to control the regulators on the Palmas series of
|
||||
chips say Y here. This will enable support for all the software
|
||||
controllable SMPS/LDO regulators.
|
||||
|
||||
The regulators available on Palmas series chips vary depending
|
||||
on the muxing. This is handled automatically in the driver by
|
||||
reading the mux info from OTP.
|
||||
Select this option to support Texas Instruments' on-chip Adaptive Body
|
||||
Bias (ABB) LDO regulators. It is recommended that this option be
|
||||
enabled on required TI SoC. Certain Operating Performance Points
|
||||
on TI SoCs may be unstable without enabling this as it provides
|
||||
device specific optimized bias to allow/optimize functionality.
|
||||
|
||||
config REGULATOR_TPS51632
|
||||
tristate "TI TPS51632 Power Regulator"
|
||||
|
|
@ -481,16 +498,6 @@ config REGULATOR_TWL4030
|
|||
This driver supports the voltage regulators provided by
|
||||
this family of companion chips.
|
||||
|
||||
config REGULATOR_TI_ABB
|
||||
bool "TI Adaptive Body Bias on-chip LDO"
|
||||
depends on ARCH_OMAP
|
||||
help
|
||||
Select this option to support Texas Instruments' on-chip Adaptive Body
|
||||
Bias (ABB) LDO regulators. It is recommended that this option be
|
||||
enabled on required TI SoC. Certain Operating Performance Points
|
||||
on TI SoCs may be unstable without enabling this as it provides
|
||||
device specific optimized bias to allow/optimize functionality.
|
||||
|
||||
config REGULATOR_VEXPRESS
|
||||
tristate "Versatile Express regulators"
|
||||
depends on VEXPRESS_CONFIG
|
||||
|
|
@ -526,12 +533,5 @@ config REGULATOR_WM8994
|
|||
This driver provides support for the voltage regulators on the
|
||||
WM8994 CODEC.
|
||||
|
||||
config REGULATOR_AS3711
|
||||
tristate "AS3711 PMIC"
|
||||
depends on MFD_AS3711
|
||||
help
|
||||
This driver provides support for the voltage regulators on the
|
||||
AS3711 PMIC
|
||||
|
||||
endif
|
||||
|
||||
|
|
|
|||
|
|
@ -52,6 +52,7 @@ obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
|
|||
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
|
||||
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
|
||||
obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
|
||||
|
|
@ -64,7 +65,6 @@ obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
|
|||
obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress.o
|
||||
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
|
||||
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
|
||||
|
|
|
|||
Loading…
Reference in New Issue