First set of IIO fixes for the 3.14 cycle.

Included is the patch previously set as the fourth round for 3.13 which was
 to late to be appropriate.
 
 * Another endian fix (ad799x adc) due to missuse of the IIO_ST macro (which
   is going away very shortly)
 * A reversed error check in ad5933 which will make the probe fail.
 * A buffer overflow in the example code in the documentation.
 * ad799x was freeing an irq that might or might not have been requested.
 * tsl2563 was checking the wrong element of chan_spec for modifiers. Thus some
   sysfs reads would give the wrong values.
 * A missing dependency on HAS_IOMEM in spear_adc and lpc32xx was causing some
   test build failures (on s390 and perhaps elsewhere).
 
 I also have a few fixes queued up for things that went in during the 3.14
 merge window which will follow as a separate pull request (to avoid rebasing
 my tree).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJS7+bmAAoJEFSFNJnE9BaIBEIP/Ry6x7SbKwjP71dO0gSrCmbf
 WLO7yE+jy3MRkua/vhRn2nRx76Mk4N0NfZ7aSxja3gE/UMIgDUG0QC5tJgVm+Sol
 rUr+TOn9vrBhvJWoaOuZerkfdEiP1AUE034sQ4BXPm8M+zpf/1t2nRXslFPGx0hw
 bq+XBhBpB2pBlmn8Z6q9DK279elh1cmhuJyFK4BEEa98/fLCfkLoKPWD3L/uDS6/
 ne33LqvcKPgCkEToX5FoSeCibnQI673LgR2zuxfljxVYnkO7y8IqdzwJDExpsNzW
 mGYIrnuGM6ocXe8vIqkqknD9x8xST+mCGrpIUC0MD9eq5AIRzttxZoYKclq3kTTQ
 bukrbuqkiGyC2Hwe50A4+bWM06I8yu/NDUuGxCvKfy26wqwAtXlKGTzwJUg6jHBU
 rssMhYbBLSKmyl0sFlH1xwaHGDZKDNHWz60GpdO2OS516U37JkGvRvRg2bkgomps
 w4OoqXgspE5F1CCnRgy2NYIbN+UlJWY4SGO/boCor5JonYkWnmTq+0sQ4XxehAqc
 sTPW7vXITTkGJmrAgRWmBReI0iE03sC2CDZIOLlGOczJ4tDj7iRh1EN1tAB7gGV8
 n3rIZaE5AfAGKNgLcgF5WaVbnxm/Pd9dr+JdjcFv+I8imKiLCCnj/U23WaD27kUt
 RnMueM0Uu7I1hD3BSbDx
 =otUr
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-3.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 3.14 cycle.

Included is the patch previously set as the fourth round for 3.13 which was
to late to be appropriate.

* Another endian fix (ad799x adc) due to missuse of the IIO_ST macro (which
  is going away very shortly)
* A reversed error check in ad5933 which will make the probe fail.
* A buffer overflow in the example code in the documentation.
* ad799x was freeing an irq that might or might not have been requested.
* tsl2563 was checking the wrong element of chan_spec for modifiers. Thus some
  sysfs reads would give the wrong values.
* A missing dependency on HAS_IOMEM in spear_adc and lpc32xx was causing some
  test build failures (on s390 and perhaps elsewhere).

I also have a few fixes queued up for things that went in during the 3.14
merge window which will follow as a separate pull request (to avoid rebasing
my tree).

drivers/iio/light/tsl2563.c

@@ -460,10 +460,14 @@ static int tsl2563_write_raw(struct iio_dev *indio_dev,
 {
 	struct tsl2563_chip *chip = iio_priv(indio_dev);
 
-	if (chan->channel == IIO_MOD_LIGHT_BOTH)
+	if (mask != IIO_CHAN_INFO_CALIBSCALE)
+		return -EINVAL;
+	if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
 		chip->calib0 = calib_from_sysfs(val);
-	else
+	else if (chan->channel2 == IIO_MOD_LIGHT_IR)
 		chip->calib1 = calib_from_sysfs(val);
+	else
+		return -EINVAL;
 
 	return 0;
 }
@@ -472,14 +476,14 @@ static int tsl2563_read_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *chan,
 			    int *val,
 			    int *val2,
-			    long m)
+			    long mask)
 {
 	int ret = -EINVAL;
 	u32 calib0, calib1;
 	struct tsl2563_chip *chip = iio_priv(indio_dev);
 
 	mutex_lock(&chip->lock);
-	switch (m) {
+	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 	case IIO_CHAN_INFO_PROCESSED:
 		switch (chan->type) {
@@ -498,7 +502,7 @@ static int tsl2563_read_raw(struct iio_dev *indio_dev,
 			ret = tsl2563_get_adc(chip);
 			if (ret)
 				goto error_ret;
-			if (chan->channel == 0)
+			if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
 				*val = chip->data0;
 			else
 				*val = chip->data1;
@@ -510,7 +514,7 @@ static int tsl2563_read_raw(struct iio_dev *indio_dev,
 		break;
 
 	case IIO_CHAN_INFO_CALIBSCALE:
-		if (chan->channel == 0)
+		if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
 			*val = calib_to_sysfs(chip->calib0);
 		else
 			*val = calib_to_sysfs(chip->calib1);

drivers/staging/iio/Documentation/iio_utils.h

@@ -77,7 +77,6 @@ struct iio_channel_info {
 	uint64_t mask;
 	unsigned be;
 	unsigned is_signed;
-	unsigned enabled;
 	unsigned location;
 };
 
@@ -335,6 +334,7 @@ inline int build_channel_array(const char *device_dir,
 	while (ent = readdir(dp), ent != NULL) {
 		if (strcmp(ent->d_name + strlen(ent->d_name) - strlen("_en"),
 			   "_en") == 0) {
+			int current_enabled = 0;
 			current = &(*ci_array)[count++];
 			ret = asprintf(&filename,
 				       "%s/%s", scan_el_dir, ent->d_name);
@@ -350,10 +350,10 @@ inline int build_channel_array(const char *device_dir,
 				ret = -errno;
 				goto error_cleanup_array;
 			}
-			fscanf(sysfsfp, "%u", &current->enabled);
+			fscanf(sysfsfp, "%u", &current_enabled);
 			fclose(sysfsfp);
 
-			if (!current->enabled) {
+			if (!current_enabled) {
 				free(filename);
 				count--;
 				continue;

drivers/staging/iio/adc/ad799x_core.c

@@ -409,7 +409,13 @@ static const struct iio_event_spec ad799x_events[] = {
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
 	.scan_index = (_index), \
-	.scan_type = IIO_ST('u', _realbits, 16, 12 - (_realbits)), \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = (_realbits), \
+		.storagebits = 16, \
+		.shift = 12 - (_realbits), \
+		.endianness = IIO_BE, \
+	}, \
 	.event_spec = _ev_spec, \
 	.num_event_specs = _num_ev_spec, \
 }
@@ -588,7 +594,8 @@ static int ad799x_probe(struct i2c_client *client,
 	return 0;
 
 error_free_irq:
-	free_irq(client->irq, indio_dev);
+	if (client->irq > 0)
+		free_irq(client->irq, indio_dev);
 error_cleanup_ring:
 	ad799x_ring_cleanup(indio_dev);
 error_disable_reg:

drivers/staging/iio/impedance-analyzer/ad5933.c

@@ -629,7 +629,7 @@ static int ad5933_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	struct iio_buffer *buffer;
 
 	buffer = iio_kfifo_allocate(indio_dev);
-	if (buffer)
+	if (!buffer)
 		return -ENOMEM;
 
 	iio_device_attach_buffer(indio_dev, buffer);