Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: don't set IORDY for reset sata_fsl: Add power mgmt support [libata] PATA driver for CF interface on AT91SAM9260 SoC [libata] beautify module parameters
This commit is contained in:
Linus Torvalds
commit
811e42cfba
|
|
@ -679,6 +679,14 @@ config PATA_PLATFORM
|
|||
|
||||
If unsure, say N.
|
||||
|
||||
config PATA_AT91
|
||||
tristate "PATA support for AT91SAM9260"
|
||||
depends on ARM && ARCH_AT91
|
||||
help
|
||||
This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
config PATA_OF_PLATFORM
|
||||
tristate "OpenFirmware platform device PATA support"
|
||||
depends on PATA_PLATFORM && PPC_OF
|
||||
|
|
|
|||
|
|
@ -72,6 +72,7 @@ obj-$(CONFIG_PATA_SCH) += pata_sch.o
|
|||
obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
|
||||
obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o
|
||||
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
|
||||
obj-$(CONFIG_PATA_AT91) += pata_at91.o
|
||||
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
|
||||
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
|
||||
# Should be last but two libata driver
|
||||
|
|
|
|||
|
|
@ -125,19 +125,19 @@ MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link spe
|
|||
|
||||
static int atapi_enabled = 1;
|
||||
module_param(atapi_enabled, int, 0444);
|
||||
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
|
||||
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on [default])");
|
||||
|
||||
static int atapi_dmadir = 0;
|
||||
module_param(atapi_dmadir, int, 0444);
|
||||
MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)");
|
||||
MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off [default], 1=on)");
|
||||
|
||||
int atapi_passthru16 = 1;
|
||||
module_param(atapi_passthru16, int, 0444);
|
||||
MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices; on by default (0=off, 1=on)");
|
||||
MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices (0=off, 1=on [default])");
|
||||
|
||||
int libata_fua = 0;
|
||||
module_param_named(fua, libata_fua, int, 0444);
|
||||
MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
|
||||
MODULE_PARM_DESC(fua, "FUA support (0=off [default], 1=on)");
|
||||
|
||||
static int ata_ignore_hpa;
|
||||
module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
|
||||
|
|
@ -153,11 +153,11 @@ MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
|
|||
|
||||
int libata_noacpi = 0;
|
||||
module_param_named(noacpi, libata_noacpi, int, 0444);
|
||||
MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in probe/suspend/resume when set");
|
||||
MODULE_PARM_DESC(noacpi, "Disable the use of ACPI in probe/suspend/resume (0=off [default], 1=on)");
|
||||
|
||||
int libata_allow_tpm = 0;
|
||||
module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
|
||||
MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands");
|
||||
MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)");
|
||||
|
||||
MODULE_AUTHOR("Jeff Garzik");
|
||||
MODULE_DESCRIPTION("Library module for ATA devices");
|
||||
|
|
@ -1993,11 +1993,17 @@ unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
|
|||
* Check if the current speed of the device requires IORDY. Used
|
||||
* by various controllers for chip configuration.
|
||||
*/
|
||||
|
||||
unsigned int ata_pio_need_iordy(const struct ata_device *adev)
|
||||
{
|
||||
/* Controller doesn't support IORDY. Probably a pointless check
|
||||
as the caller should know this */
|
||||
/* Don't set IORDY if we're preparing for reset. IORDY may
|
||||
* lead to controller lock up on certain controllers if the
|
||||
* port is not occupied. See bko#11703 for details.
|
||||
*/
|
||||
if (adev->link->ap->pflags & ATA_PFLAG_RESETTING)
|
||||
return 0;
|
||||
/* Controller doesn't support IORDY. Probably a pointless
|
||||
* check as the caller should know this.
|
||||
*/
|
||||
if (adev->link->ap->flags & ATA_FLAG_NO_IORDY)
|
||||
return 0;
|
||||
/* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6. */
|
||||
|
|
@ -2020,7 +2026,6 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
|
|||
* Compute the highest mode possible if we are not using iordy. Return
|
||||
* -1 if no iordy mode is available.
|
||||
*/
|
||||
|
||||
static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
|
||||
{
|
||||
/* If we have no drive specific rule, then PIO 2 is non IORDY */
|
||||
|
|
|
|||
|
|
@ -0,0 +1,361 @@
|
|||
/*
|
||||
* PATA driver for AT91SAM9260 Static Memory Controller
|
||||
* with CompactFlash interface in True IDE mode
|
||||
*
|
||||
* Copyright (C) 2009 Matyukevich Sergey
|
||||
*
|
||||
* Based on:
|
||||
* * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c
|
||||
* * pata_at32 driver by Kristoffer Nyborg Gregertsen
|
||||
* * at91_ide driver by Stanislaw Gruszka
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2
|
||||
* as published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/blkdev.h>
|
||||
#include <scsi/scsi_host.h>
|
||||
#include <linux/ata.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/libata.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ata_platform.h>
|
||||
|
||||
#include <mach/at91sam9260_matrix.h>
|
||||
#include <mach/at91sam9_smc.h>
|
||||
#include <mach/at91sam9260.h>
|
||||
#include <mach/board.h>
|
||||
#include <mach/gpio.h>
|
||||
|
||||
|
||||
#define DRV_NAME "pata_at91"
|
||||
#define DRV_VERSION "0.1"
|
||||
|
||||
#define CF_IDE_OFFSET 0x00c00000
|
||||
#define CF_ALT_IDE_OFFSET 0x00e00000
|
||||
#define CF_IDE_RES_SIZE 0x08
|
||||
|
||||
struct at91_ide_info {
|
||||
unsigned long mode;
|
||||
unsigned int cs;
|
||||
|
||||
void __iomem *ide_addr;
|
||||
void __iomem *alt_addr;
|
||||
};
|
||||
|
||||
const struct ata_timing initial_timing =
|
||||
{XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
|
||||
|
||||
static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
|
||||
{
|
||||
unsigned long mul;
|
||||
|
||||
/*
|
||||
* cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
|
||||
* x * (f / 1_000_000_000) =
|
||||
* x * ((f * 65536) / 1_000_000_000) / 65536 =
|
||||
* x * (((f / 10_000) * 65536) / 100_000) / 65536 =
|
||||
*/
|
||||
|
||||
mul = (mck_hz / 10000) << 16;
|
||||
mul /= 100000;
|
||||
|
||||
return (ns * mul + 65536) >> 16; /* rounding */
|
||||
}
|
||||
|
||||
static void set_smc_mode(struct at91_ide_info *info)
|
||||
{
|
||||
at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
|
||||
return;
|
||||
}
|
||||
|
||||
static void set_smc_timing(struct device *dev,
|
||||
struct at91_ide_info *info, const struct ata_timing *ata)
|
||||
{
|
||||
int read_cycle, write_cycle, active, recover;
|
||||
int nrd_setup, nrd_pulse, nrd_recover;
|
||||
int nwe_setup, nwe_pulse;
|
||||
|
||||
int ncs_write_setup, ncs_write_pulse;
|
||||
int ncs_read_setup, ncs_read_pulse;
|
||||
|
||||
unsigned int mck_hz;
|
||||
struct clk *mck;
|
||||
|
||||
read_cycle = ata->cyc8b;
|
||||
nrd_setup = ata->setup;
|
||||
nrd_pulse = ata->act8b;
|
||||
nrd_recover = ata->rec8b;
|
||||
|
||||
mck = clk_get(NULL, "mck");
|
||||
BUG_ON(IS_ERR(mck));
|
||||
mck_hz = clk_get_rate(mck);
|
||||
|
||||
read_cycle = calc_mck_cycles(read_cycle, mck_hz);
|
||||
nrd_setup = calc_mck_cycles(nrd_setup, mck_hz);
|
||||
nrd_pulse = calc_mck_cycles(nrd_pulse, mck_hz);
|
||||
nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
|
||||
|
||||
clk_put(mck);
|
||||
|
||||
active = nrd_setup + nrd_pulse;
|
||||
recover = read_cycle - active;
|
||||
|
||||
/* Need at least two cycles recovery */
|
||||
if (recover < 2)
|
||||
read_cycle = active + 2;
|
||||
|
||||
/* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
|
||||
ncs_read_setup = 1;
|
||||
ncs_read_pulse = read_cycle - 2;
|
||||
|
||||
/* Write timings same as read timings */
|
||||
write_cycle = read_cycle;
|
||||
nwe_setup = nrd_setup;
|
||||
nwe_pulse = nrd_pulse;
|
||||
ncs_write_setup = ncs_read_setup;
|
||||
ncs_write_pulse = ncs_read_pulse;
|
||||
|
||||
dev_dbg(dev, "ATA timings: nrd_setup = %d nrd_pulse = %d nrd_cycle = %d\n",
|
||||
nrd_setup, nrd_pulse, read_cycle);
|
||||
dev_dbg(dev, "ATA timings: nwe_setup = %d nwe_pulse = %d nwe_cycle = %d\n",
|
||||
nwe_setup, nwe_pulse, write_cycle);
|
||||
dev_dbg(dev, "ATA timings: ncs_read_setup = %d ncs_read_pulse = %d\n",
|
||||
ncs_read_setup, ncs_read_pulse);
|
||||
dev_dbg(dev, "ATA timings: ncs_write_setup = %d ncs_write_pulse = %d\n",
|
||||
ncs_write_setup, ncs_write_pulse);
|
||||
|
||||
at91_sys_write(AT91_SMC_SETUP(info->cs),
|
||||
AT91_SMC_NWESETUP_(nwe_setup) |
|
||||
AT91_SMC_NRDSETUP_(nrd_setup) |
|
||||
AT91_SMC_NCS_WRSETUP_(ncs_write_setup) |
|
||||
AT91_SMC_NCS_RDSETUP_(ncs_read_setup));
|
||||
|
||||
at91_sys_write(AT91_SMC_PULSE(info->cs),
|
||||
AT91_SMC_NWEPULSE_(nwe_pulse) |
|
||||
AT91_SMC_NRDPULSE_(nrd_pulse) |
|
||||
AT91_SMC_NCS_WRPULSE_(ncs_write_pulse) |
|
||||
AT91_SMC_NCS_RDPULSE_(ncs_read_pulse));
|
||||
|
||||
at91_sys_write(AT91_SMC_CYCLE(info->cs),
|
||||
AT91_SMC_NWECYCLE_(write_cycle) |
|
||||
AT91_SMC_NRDCYCLE_(read_cycle));
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
||||
{
|
||||
struct at91_ide_info *info = ap->host->private_data;
|
||||
struct ata_timing timing;
|
||||
int ret;
|
||||
|
||||
/* Compute ATA timing and set it to SMC */
|
||||
ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0);
|
||||
if (ret) {
|
||||
dev_warn(ap->dev, "Failed to compute ATA timing %d, \
|
||||
set PIO_0 timing\n", ret);
|
||||
set_smc_timing(ap->dev, info, &initial_timing);
|
||||
} else {
|
||||
set_smc_timing(ap->dev, info, &timing);
|
||||
}
|
||||
|
||||
/* Setup SMC mode */
|
||||
set_smc_mode(info);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
|
||||
unsigned char *buf, unsigned int buflen, int rw)
|
||||
{
|
||||
struct at91_ide_info *info = dev->link->ap->host->private_data;
|
||||
unsigned int consumed;
|
||||
unsigned long flags;
|
||||
unsigned int mode;
|
||||
|
||||
local_irq_save(flags);
|
||||
mode = at91_sys_read(AT91_SMC_MODE(info->cs));
|
||||
|
||||
/* set 16bit mode before writing data */
|
||||
at91_sys_write(AT91_SMC_MODE(info->cs),
|
||||
(mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16);
|
||||
|
||||
consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
|
||||
|
||||
/* restore 8bit mode after data is written */
|
||||
at91_sys_write(AT91_SMC_MODE(info->cs),
|
||||
(mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8);
|
||||
|
||||
local_irq_restore(flags);
|
||||
return consumed;
|
||||
}
|
||||
|
||||
static struct scsi_host_template pata_at91_sht = {
|
||||
ATA_PIO_SHT(DRV_NAME),
|
||||
};
|
||||
|
||||
static struct ata_port_operations pata_at91_port_ops = {
|
||||
.inherits = &ata_sff_port_ops,
|
||||
|
||||
.sff_data_xfer = pata_at91_data_xfer_noirq,
|
||||
.set_piomode = pata_at91_set_piomode,
|
||||
.cable_detect = ata_cable_40wire,
|
||||
.port_start = ATA_OP_NULL,
|
||||
};
|
||||
|
||||
static int __devinit pata_at91_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct at91_cf_data *board = pdev->dev.platform_data;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct at91_ide_info *info;
|
||||
struct resource *mem_res;
|
||||
struct ata_host *host;
|
||||
struct ata_port *ap;
|
||||
int irq_flags = 0;
|
||||
int irq = 0;
|
||||
int ret;
|
||||
|
||||
/* get platform resources: IO/CTL memories and irq/rst pins */
|
||||
|
||||
if (pdev->num_resources != 1) {
|
||||
dev_err(&pdev->dev, "invalid number of resources\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
|
||||
if (!mem_res) {
|
||||
dev_err(dev, "failed to get mem resource\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
irq = board->irq_pin;
|
||||
|
||||
/* init ata host */
|
||||
|
||||
host = ata_host_alloc(dev, 1);
|
||||
|
||||
if (!host)
|
||||
return -ENOMEM;
|
||||
|
||||
ap = host->ports[0];
|
||||
ap->ops = &pata_at91_port_ops;
|
||||
ap->flags |= ATA_FLAG_SLAVE_POSS;
|
||||
ap->pio_mask = ATA_PIO4;
|
||||
|
||||
if (!irq) {
|
||||
ap->flags |= ATA_FLAG_PIO_POLLING;
|
||||
ata_port_desc(ap, "no IRQ, using PIO polling");
|
||||
}
|
||||
|
||||
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
||||
|
||||
if (!info) {
|
||||
dev_err(dev, "failed to allocate memory for private data\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
info->cs = board->chipselect;
|
||||
info->mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
|
||||
AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
|
||||
AT91_SMC_DBW_8 | AT91_SMC_TDF_(0);
|
||||
|
||||
info->ide_addr = devm_ioremap(dev,
|
||||
mem_res->start + CF_IDE_OFFSET, CF_IDE_RES_SIZE);
|
||||
|
||||
if (!info->ide_addr) {
|
||||
dev_err(dev, "failed to map IO base\n");
|
||||
ret = -ENOMEM;
|
||||
goto err_ide_ioremap;
|
||||
}
|
||||
|
||||
info->alt_addr = devm_ioremap(dev,
|
||||
mem_res->start + CF_ALT_IDE_OFFSET, CF_IDE_RES_SIZE);
|
||||
|
||||
if (!info->alt_addr) {
|
||||
dev_err(dev, "failed to map CTL base\n");
|
||||
ret = -ENOMEM;
|
||||
goto err_alt_ioremap;
|
||||
}
|
||||
|
||||
ap->ioaddr.cmd_addr = info->ide_addr;
|
||||
ap->ioaddr.ctl_addr = info->alt_addr + 0x06;
|
||||
ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
|
||||
|
||||
ata_sff_std_ports(&ap->ioaddr);
|
||||
|
||||
ata_port_desc(ap, "mmio cmd 0x%llx ctl 0x%llx",
|
||||
(unsigned long long)mem_res->start + CF_IDE_OFFSET,
|
||||
(unsigned long long)mem_res->start + CF_ALT_IDE_OFFSET);
|
||||
|
||||
host->private_data = info;
|
||||
|
||||
return ata_host_activate(host, irq ? gpio_to_irq(irq) : 0,
|
||||
irq ? ata_sff_interrupt : NULL,
|
||||
irq_flags, &pata_at91_sht);
|
||||
|
||||
err_alt_ioremap:
|
||||
devm_iounmap(dev, info->ide_addr);
|
||||
|
||||
err_ide_ioremap:
|
||||
kfree(info);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit pata_at91_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
||||
struct at91_ide_info *info = host->private_data;
|
||||
struct device *dev = &pdev->dev;
|
||||
|
||||
if (!host)
|
||||
return 0;
|
||||
|
||||
ata_host_detach(host);
|
||||
|
||||
if (!info)
|
||||
return 0;
|
||||
|
||||
devm_iounmap(dev, info->ide_addr);
|
||||
devm_iounmap(dev, info->alt_addr);
|
||||
|
||||
kfree(info);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver pata_at91_driver = {
|
||||
.probe = pata_at91_probe,
|
||||
.remove = __devexit_p(pata_at91_remove),
|
||||
.driver = {
|
||||
.name = DRV_NAME,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init pata_at91_init(void)
|
||||
{
|
||||
return platform_driver_register(&pata_at91_driver);
|
||||
}
|
||||
|
||||
static void __exit pata_at91_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&pata_at91_driver);
|
||||
}
|
||||
|
||||
|
||||
module_init(pata_at91_init);
|
||||
module_exit(pata_at91_exit);
|
||||
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_DESCRIPTION("Driver for CF in True IDE mode on AT91SAM9260 SoC");
|
||||
MODULE_AUTHOR("Matyukevich Sergey");
|
||||
MODULE_VERSION(DRV_VERSION);
|
||||
|
||||
|
|
@ -1378,6 +1378,37 @@ static int sata_fsl_remove(struct of_device *ofdev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static int sata_fsl_suspend(struct of_device *op, pm_message_t state)
|
||||
{
|
||||
struct ata_host *host = dev_get_drvdata(&op->dev);
|
||||
return ata_host_suspend(host, state);
|
||||
}
|
||||
|
||||
static int sata_fsl_resume(struct of_device *op)
|
||||
{
|
||||
struct ata_host *host = dev_get_drvdata(&op->dev);
|
||||
struct sata_fsl_host_priv *host_priv = host->private_data;
|
||||
int ret;
|
||||
void __iomem *hcr_base = host_priv->hcr_base;
|
||||
struct ata_port *ap = host->ports[0];
|
||||
struct sata_fsl_port_priv *pp = ap->private_data;
|
||||
|
||||
ret = sata_fsl_init_controller(host);
|
||||
if (ret) {
|
||||
dev_printk(KERN_ERR, &op->dev,
|
||||
"Error initialize hardware\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Recovery the CHBA register in host controller cmd register set */
|
||||
iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA);
|
||||
|
||||
ata_host_resume(host);
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
static struct of_device_id fsl_sata_match[] = {
|
||||
{
|
||||
.compatible = "fsl,pq-sata",
|
||||
|
|
@ -1392,6 +1423,10 @@ static struct of_platform_driver fsl_sata_driver = {
|
|||
.match_table = fsl_sata_match,
|
||||
.probe = sata_fsl_probe,
|
||||
.remove = sata_fsl_remove,
|
||||
#ifdef CONFIG_PM
|
||||
.suspend = sata_fsl_suspend,
|
||||
.resume = sata_fsl_resume,
|
||||
#endif
|
||||
};
|
||||
|
||||
static int __init sata_fsl_init(void)
|
||||
|
|
|
|||
Loading…
Reference in New Issue