From e51e07e0ac7e3ff847d640f41b7527db04d4a4e7 Mon Sep 17 00:00:00 2001 From: Tkhai Kirill Date: Tue, 10 Jan 2012 13:17:03 +0000 Subject: [PATCH 01/24] sparc32: forced setting of mode of sun4m per-cpu timers SUN4M per-cpu timers have two modes of work. These are timer mode and counter mode. Kernel doesn't write anything to the register, which is connected with mode choice. So, the mode is chosen by bootloader. This patch forces to use timer mode from the kernel and to be independent of bootloader. I had this problem with OpenBIOS. Timers don't tick and kernel fails on QEMU, when it's compiled with SMP support. The patch fixes problem. Signed-off-by: Tkhai Kirill Acked-by: Sam Ravnborg Signed-off-by: David S. Miller --- arch/sparc/kernel/sun4m_irq.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c index 422c16dad1f6..e61165161dd3 100644 --- a/arch/sparc/kernel/sun4m_irq.c +++ b/arch/sparc/kernel/sun4m_irq.c @@ -399,6 +399,9 @@ static void __init sun4m_init_timers(irq_handler_t counter_fn) timers_global = (void __iomem *) (unsigned long) addr[num_cpu_timers]; + /* Every per-cpu timer works in timer mode */ + sbus_writel(0x00000000, &timers_global->timer_config); + sbus_writel((((1000000/HZ) + 1) << 10), &timers_global->l10_limit); master_l10_counter = &timers_global->l10_count; From 5d53cb27d849c899136c048ec84c940ac449494b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 13 Jan 2012 10:14:12 -0800 Subject: [PATCH 02/24] memblock: Fix alloc failure due to dumb underflow protection in memblock_find_in_range_node() 7bd0b0f0da ("memblock: Reimplement memblock allocation using reverse free area iterator") implemented a simple top-down allocator using a reverse memblock iterator. To avoid underflow in the allocator loop, it simply raised the lower boundary to the requested size under the assumption that requested size would be far smaller than available memblocks. This causes early page table allocation failure under certain configurations in Xen. Fix it by checking for underflow directly instead of bumping up lower bound. Signed-off-by: Tejun Heo Reported-by: Konrad Rzeszutek Wilk Cc: rjw@sisk.pl Cc: xen-devel@lists.xensource.com Cc: Benjamin Herrenschmidt Cc: Andrew Morton Cc: Linus Torvalds Link: http://lkml.kernel.org/r/20120113181412.GA11112@google.com Signed-off-by: Ingo Molnar --- mm/memblock.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/mm/memblock.c b/mm/memblock.c index 2f55f19b7c86..77b5f227e1d8 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -106,14 +106,17 @@ phys_addr_t __init_memblock memblock_find_in_range_node(phys_addr_t start, if (end == MEMBLOCK_ALLOC_ACCESSIBLE) end = memblock.current_limit; - /* adjust @start to avoid underflow and allocating the first page */ - start = max3(start, size, (phys_addr_t)PAGE_SIZE); + /* avoid allocating the first page */ + start = max_t(phys_addr_t, start, PAGE_SIZE); end = max(start, end); for_each_free_mem_range_reverse(i, nid, &this_start, &this_end, NULL) { this_start = clamp(this_start, start, end); this_end = clamp(this_end, start, end); + if (this_end < size) + continue; + cand = round_down(this_end - size, align); if (cand >= this_start) return cand; From d8e8ed95cda1dfd6813588333d36552935eba4a1 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 15 Dec 2011 13:43:24 +1030 Subject: [PATCH 03/24] rcu: Make rcutorture bool parameters really bool (core code) module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. This commit makes this change to rcutorture. Signed-off-by: Rusty Russell Signed-off-by: Paul E. McKenney --- kernel/rcutorture.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c index 88f17b8a3b1d..e29edc374cec 100644 --- a/kernel/rcutorture.c +++ b/kernel/rcutorture.c @@ -56,8 +56,8 @@ static int nreaders = -1; /* # reader threads, defaults to 2*ncpus */ static int nfakewriters = 4; /* # fake writer threads */ static int stat_interval; /* Interval between stats, in seconds. */ /* Defaults to "only at end of test". */ -static int verbose; /* Print more debug info. */ -static int test_no_idle_hz; /* Test RCU's support for tickless idle CPUs. */ +static bool verbose; /* Print more debug info. */ +static bool test_no_idle_hz; /* Test RCU's support for tickless idle CPUs. */ static int shuffle_interval = 3; /* Interval between shuffles (in sec)*/ static int stutter = 5; /* Start/stop testing interval (in sec) */ static int irqreader = 1; /* RCU readers from irq (timers). */ From 7061ca3b6c99fc78115560b9a10227c8c5fafc45 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 20 Dec 2011 08:20:46 -0800 Subject: [PATCH 04/24] sched: Add "const" to is_idle_task() parameter This patch fixes a build warning in -next due to a const pointer being passed to is_idle_task(). Because is_idle_task() does not modify anything, this commit adds the "const" to is_idle_task()'s argument declaration. Reported-by: Stephen Rothwell Signed-off-by: Paul E. McKenney --- include/linux/sched.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 4a7e4d333a27..56fa25a5b1eb 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2074,7 +2074,7 @@ extern struct task_struct *idle_task(int cpu); * is_idle_task - is the specified task an idle task? * @tsk: the task in question. */ -static inline bool is_idle_task(struct task_struct *p) +static inline bool is_idle_task(const struct task_struct *p) { return p->pid == 0; } From 4410030646be072b82ec1892ad5cc7d91af384d8 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 27 Dec 2011 15:04:26 +0100 Subject: [PATCH 05/24] rcu: Add missing __cpuinit annotation in rcutorture code "rcu: Add rcutorture CPU-hotplug capability" adds cpu hotplug operations to the rcutorture code but produces a false positive warning about section mismatches: WARNING: vmlinux.o(.text+0x1e420c): Section mismatch in reference from the function rcu_torture_onoff() to the function .cpuinit.text:cpu_up() The function rcu_torture_onoff() references the function __cpuinit cpu_up(). This is often because rcu_torture_onoff lacks a __cpuinit annotation or the annotation of cpu_up is wrong. This commit therefore adds a __cpuinit annotation so the warning goes away. Signed-off-by: Heiko Carstens Signed-off-by: Paul E. McKenney --- kernel/rcutorture.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c index e29edc374cec..a58ac285fc69 100644 --- a/kernel/rcutorture.c +++ b/kernel/rcutorture.c @@ -1399,7 +1399,7 @@ rcu_torture_shutdown(void *arg) * Execute random CPU-hotplug operations at the interval specified * by the onoff_interval. */ -static int +static int __cpuinit rcu_torture_onoff(void *arg) { int cpu; @@ -1447,7 +1447,7 @@ rcu_torture_onoff(void *arg) return 0; } -static int +static int __cpuinit rcu_torture_onoff_init(void) { if (onoff_interval <= 0) From fd45c15f13e754f3c106427e857310f3e0813951 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Fri, 20 Jan 2012 10:12:45 +0900 Subject: [PATCH 06/24] perf: Don't call release_callchain_buffers() if allocation fails When alloc_callchain_buffers() fails, it frees all of entries before return. In addition, calling the release_callchain_buffers() will cause a NULL pointer dereference since callchain_cpu_entries is not set. Signed-off-by: Namhyung Kim Acked-by: Frederic Weisbecker Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Link: http://lkml.kernel.org/r/1327021966-27688-1-git-send-email-namhyung.kim@lge.com Signed-off-by: Ingo Molnar --- kernel/events/callchain.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/kernel/events/callchain.c b/kernel/events/callchain.c index 057e24b665cf..6581a040f399 100644 --- a/kernel/events/callchain.c +++ b/kernel/events/callchain.c @@ -115,8 +115,6 @@ int get_callchain_buffers(void) } err = alloc_callchain_buffers(); - if (err) - release_callchain_buffers(); exit: mutex_unlock(&callchain_mutex); From 46cd6a7f680d14f6f80ede9f04aeb70fa83bd266 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Fri, 20 Jan 2012 10:12:46 +0900 Subject: [PATCH 07/24] perf: Call perf_cgroup_event_time() directly The perf_event_time() will call perf_cgroup_event_time() if @event is a cgroup event. Just do it directly and avoid the extra check.. Signed-off-by: Namhyung Kim Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Link: http://lkml.kernel.org/r/1327021966-27688-2-git-send-email-namhyung.kim@lge.com Signed-off-by: Ingo Molnar --- kernel/events/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index a8f4ac001a00..32b48c889711 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -815,7 +815,7 @@ static void update_event_times(struct perf_event *event) * here. */ if (is_cgroup_event(event)) - run_end = perf_event_time(event); + run_end = perf_cgroup_event_time(event); else if (ctx->is_active) run_end = ctx->time; else From aa557875cc6ed78a8c6035dffa354a09d48b16f6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Jul 2011 22:33:13 +0200 Subject: [PATCH 08/24] m68k/irq: Remove obsolete IRQ_FLG_* definitions The m68k core irq code stopped honoring these flags during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/irq.h | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 6198df5ff245..d3a8acd4f1fe 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -49,19 +49,6 @@ #define IRQ_USER 8 -/* - * various flags for request_irq() - the Amiga now uses the standard - * mechanism like all other architectures - IRQF_DISABLED and - * IRQF_SHARED are your friends. - */ -#ifndef MACH_AMIGA_ONLY -#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */ -#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */ -#define IRQ_FLG_FAST (0x0004) -#define IRQ_FLG_SLOW (0x0008) -#define IRQ_FLG_STD (0x8000) /* internally used */ -#endif - struct irq_data; struct irq_chip; struct irq_desc; From d9070fc4997e255532f0519709c9326d043501b2 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Mon, 24 Oct 2011 01:11:10 +1100 Subject: [PATCH 09/24] macfb: fix black and white modes macfb won't init in black & white modes since fb_alloc_cmap() no longer works for zero cmap length. Fix this and also clean up a few printk's and some stylistic inconsistencies. Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven --- drivers/video/macfb.c | 60 ++++++++++++++++++++----------------------- 1 file changed, 28 insertions(+), 32 deletions(-) diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c index 43207cc6cc19..fe01add3700e 100644 --- a/drivers/video/macfb.c +++ b/drivers/video/macfb.c @@ -592,12 +592,12 @@ static int __init macfb_init(void) if (!fb_info.screen_base) return -ENODEV; - printk("macfb: framebuffer at 0x%08lx, mapped to 0x%p, size %dk\n", - macfb_fix.smem_start, fb_info.screen_base, - macfb_fix.smem_len / 1024); - printk("macfb: mode is %dx%dx%d, linelength=%d\n", - macfb_defined.xres, macfb_defined.yres, - macfb_defined.bits_per_pixel, macfb_fix.line_length); + pr_info("macfb: framebuffer at 0x%08lx, mapped to 0x%p, size %dk\n", + macfb_fix.smem_start, fb_info.screen_base, + macfb_fix.smem_len / 1024); + pr_info("macfb: mode is %dx%dx%d, linelength=%d\n", + macfb_defined.xres, macfb_defined.yres, + macfb_defined.bits_per_pixel, macfb_fix.line_length); /* Fill in the available video resolution */ macfb_defined.xres_virtual = macfb_defined.xres; @@ -613,14 +613,10 @@ static int __init macfb_init(void) switch (macfb_defined.bits_per_pixel) { case 1: - /* - * XXX: I think this will catch any program that tries - * to do FBIO_PUTCMAP when the visual is monochrome. - */ macfb_defined.red.length = macfb_defined.bits_per_pixel; macfb_defined.green.length = macfb_defined.bits_per_pixel; macfb_defined.blue.length = macfb_defined.bits_per_pixel; - video_cmap_len = 0; + video_cmap_len = 2; macfb_fix.visual = FB_VISUAL_MONO01; break; case 2: @@ -660,11 +656,10 @@ static int __init macfb_init(void) macfb_fix.visual = FB_VISUAL_TRUECOLOR; break; default: - video_cmap_len = 0; - macfb_fix.visual = FB_VISUAL_MONO01; - printk("macfb: unknown or unsupported bit depth: %d\n", + pr_err("macfb: unknown or unsupported bit depth: %d\n", macfb_defined.bits_per_pixel); - break; + err = -EINVAL; + goto fail_unmap; } /* @@ -734,8 +729,8 @@ static int __init macfb_init(void) case MAC_MODEL_Q950: strcpy(macfb_fix.id, "DAFB"); macfb_setpalette = dafb_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; dafb_cmap_regs = ioremap(DAFB_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; break; /* @@ -744,8 +739,8 @@ static int __init macfb_init(void) case MAC_MODEL_LCII: strcpy(macfb_fix.id, "V8"); macfb_setpalette = v8_brazil_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; break; /* @@ -758,8 +753,8 @@ static int __init macfb_init(void) case MAC_MODEL_P600: strcpy(macfb_fix.id, "Brazil"); macfb_setpalette = v8_brazil_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; break; /* @@ -773,10 +768,10 @@ static int __init macfb_init(void) case MAC_MODEL_P520: case MAC_MODEL_P550: case MAC_MODEL_P460: - macfb_setpalette = v8_brazil_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; strcpy(macfb_fix.id, "Sonora"); + macfb_setpalette = v8_brazil_setpalette; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; break; /* @@ -786,10 +781,10 @@ static int __init macfb_init(void) */ case MAC_MODEL_IICI: case MAC_MODEL_IISI: - macfb_setpalette = rbv_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; strcpy(macfb_fix.id, "RBV"); + macfb_setpalette = rbv_setpalette; rbv_cmap_regs = ioremap(DAC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; break; /* @@ -797,10 +792,10 @@ static int __init macfb_init(void) */ case MAC_MODEL_Q840: case MAC_MODEL_C660: - macfb_setpalette = civic_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; strcpy(macfb_fix.id, "Civic"); + macfb_setpalette = civic_setpalette; civic_cmap_regs = ioremap(CIVIC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; break; @@ -809,26 +804,26 @@ static int __init macfb_init(void) * We think this may be like the LC II */ case MAC_MODEL_LC: + strcpy(macfb_fix.id, "LC"); if (vidtest) { macfb_setpalette = v8_brazil_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; } - strcpy(macfb_fix.id, "LC"); break; /* * We think this may be like the LC II */ case MAC_MODEL_CCL: + strcpy(macfb_fix.id, "Color Classic"); if (vidtest) { macfb_setpalette = v8_brazil_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; } - strcpy(macfb_fix.id, "Color Classic"); break; /* @@ -893,10 +888,10 @@ static int __init macfb_init(void) case MAC_MODEL_PB270C: case MAC_MODEL_PB280: case MAC_MODEL_PB280C: - macfb_setpalette = csc_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; strcpy(macfb_fix.id, "CSC"); + macfb_setpalette = csc_setpalette; csc_cmap_regs = ioremap(CSC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; break; default: @@ -918,8 +913,9 @@ static int __init macfb_init(void) if (err) goto fail_dealloc; - printk("fb%d: %s frame buffer device\n", - fb_info.node, fb_info.fix.id); + pr_info("fb%d: %s frame buffer device\n", + fb_info.node, fb_info.fix.id); + return 0; fail_dealloc: From 37be2c86f0fbd89b66792008767e688c819b7c32 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Mon, 24 Oct 2011 01:11:23 +1100 Subject: [PATCH 10/24] mac_scsi: dont enable mac_scsi irq before requesting it Don't enable the SCSI irq when initialising the chip -- the irq has no handler yet. Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven --- drivers/scsi/mac_scsi.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c index af3a6af97cc7..737d526c0813 100644 --- a/drivers/scsi/mac_scsi.c +++ b/drivers/scsi/mac_scsi.c @@ -340,9 +340,6 @@ static void mac_scsi_reset_boot(struct Scsi_Host *instance) printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." ); - /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */ - disable_irq(IRQ_MAC_SCSI); - /* get in phase */ NCR5380_write( TARGET_COMMAND_REG, PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) )); @@ -358,9 +355,6 @@ static void mac_scsi_reset_boot(struct Scsi_Host *instance) for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); ) barrier(); - /* switch on SCSI IRQ again */ - enable_irq(IRQ_MAC_SCSI); - printk(KERN_INFO " done\n" ); } #endif From c808d3d839ab70c87a6c9356c50569c87661378e Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Mon, 24 Oct 2011 01:11:24 +1100 Subject: [PATCH 11/24] mac_esp: rename irq Rename the "Mac ESP" irq as "ESP" to be consistent with all the other Mac drivers and ESP drivers. Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven --- drivers/scsi/mac_esp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c index 4ceeace80453..70eb1f79b1ba 100644 --- a/drivers/scsi/mac_esp.c +++ b/drivers/scsi/mac_esp.c @@ -565,8 +565,7 @@ static int __devinit esp_mac_probe(struct platform_device *dev) esp_chips[dev->id] = esp; mb(); if (esp_chips[!dev->id] == NULL) { - err = request_irq(host->irq, mac_scsi_esp_intr, 0, - "Mac ESP", NULL); + err = request_irq(host->irq, mac_scsi_esp_intr, 0, "ESP", NULL); if (err < 0) { esp_chips[dev->id] = NULL; goto fail_free_priv; From 2a3535069e33d8b416f406c159ce924427315303 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Mon, 9 Jan 2012 15:10:15 +0100 Subject: [PATCH 12/24] m68k: Fix assembler constraint to prevent overeager gcc optimisation Passing the address of a variable as an operand to an asm statement doesn't mark the value of this variable as used, so gcc may optimize its initialisation away. Fix this by using the "m" constraint instead. Signed-off-by: Andreas Schwab Signed-off-by: Geert Uytterhoeven Cc: stable@vger.kernel.org --- arch/m68k/atari/config.c | 8 ++++---- arch/m68k/kernel/process_mm.c | 4 ++-- arch/m68k/kernel/process_no.c | 4 ++-- arch/m68k/kernel/traps.c | 36 +++++++++++++++++------------------ arch/m68k/mm/cache.c | 6 +++--- 5 files changed, 28 insertions(+), 30 deletions(-) diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c index 4203d101363c..c4ac15c4f065 100644 --- a/arch/m68k/atari/config.c +++ b/arch/m68k/atari/config.c @@ -414,9 +414,9 @@ void __init config_atari(void) * FDC val = 4 -> Supervisor only */ asm volatile ("\n" " .chip 68030\n" - " pmove %0@,%/tt1\n" + " pmove %0,%/tt1\n" " .chip 68k" - : : "a" (&tt1_val)); + : : "m" (tt1_val)); } else { asm volatile ("\n" " .chip 68040\n" @@ -569,10 +569,10 @@ static void atari_reset(void) : "d0"); } else asm volatile ("\n" - " pmove %0@,%%tc\n" + " pmove %0,%%tc\n" " jmp %1@" : /* no outputs */ - : "a" (&tc_val), "a" (reset_addr)); + : "m" (tc_val), "a" (reset_addr)); } diff --git a/arch/m68k/kernel/process_mm.c b/arch/m68k/kernel/process_mm.c index 1bc223aa07ec..aa4ffb882366 100644 --- a/arch/m68k/kernel/process_mm.c +++ b/arch/m68k/kernel/process_mm.c @@ -189,8 +189,8 @@ void flush_thread(void) current->thread.fs = __USER_DS; if (!FPU_IS_EMU) asm volatile (".chip 68k/68881\n\t" - "frestore %0@\n\t" - ".chip 68k" : : "a" (&zero)); + "frestore %0\n\t" + ".chip 68k" : : "m" (zero)); } /* diff --git a/arch/m68k/kernel/process_no.c b/arch/m68k/kernel/process_no.c index 69c1803fcf1b..5e1078cabe0e 100644 --- a/arch/m68k/kernel/process_no.c +++ b/arch/m68k/kernel/process_no.c @@ -163,8 +163,8 @@ void flush_thread(void) #ifdef CONFIG_FPU if (!FPU_IS_EMU) asm volatile (".chip 68k/68881\n\t" - "frestore %0@\n\t" - ".chip 68k" : : "a" (&zero)); + "frestore %0\n\t" + ".chip 68k" : : "m" (zero)); #endif } diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c index 89362f2bb56a..eb6746978083 100644 --- a/arch/m68k/kernel/traps.c +++ b/arch/m68k/kernel/traps.c @@ -552,13 +552,13 @@ static inline void bus_error030 (struct frame *fp) #ifdef DEBUG asm volatile ("ptestr %3,%2@,#7,%0\n\t" - "pmove %%psr,%1@" - : "=a&" (desc) - : "a" (&temp), "a" (addr), "d" (ssw)); + "pmove %%psr,%1" + : "=a&" (desc), "=m" (temp) + : "a" (addr), "d" (ssw)); #else asm volatile ("ptestr %2,%1@,#7\n\t" - "pmove %%psr,%0@" - : : "a" (&temp), "a" (addr), "d" (ssw)); + "pmove %%psr,%0" + : "=m" (temp) : "a" (addr), "d" (ssw)); #endif mmusr = temp; @@ -605,20 +605,18 @@ static inline void bus_error030 (struct frame *fp) !(ssw & RW) ? "write" : "read", addr, fp->ptregs.pc, ssw); asm volatile ("ptestr #1,%1@,#0\n\t" - "pmove %%psr,%0@" - : /* no outputs */ - : "a" (&temp), "a" (addr)); + "pmove %%psr,%0" + : "=m" (temp) + : "a" (addr)); mmusr = temp; printk ("level 0 mmusr is %#x\n", mmusr); #if 0 - asm volatile ("pmove %%tt0,%0@" - : /* no outputs */ - : "a" (&tlong)); + asm volatile ("pmove %%tt0,%0" + : "=m" (tlong)); printk("tt0 is %#lx, ", tlong); - asm volatile ("pmove %%tt1,%0@" - : /* no outputs */ - : "a" (&tlong)); + asm volatile ("pmove %%tt1,%0" + : "=m" (tlong)); printk("tt1 is %#lx\n", tlong); #endif #ifdef DEBUG @@ -668,13 +666,13 @@ static inline void bus_error030 (struct frame *fp) #ifdef DEBUG asm volatile ("ptestr #1,%2@,#7,%0\n\t" - "pmove %%psr,%1@" - : "=a&" (desc) - : "a" (&temp), "a" (addr)); + "pmove %%psr,%1" + : "=a&" (desc), "=m" (temp) + : "a" (addr)); #else asm volatile ("ptestr #1,%1@,#7\n\t" - "pmove %%psr,%0@" - : : "a" (&temp), "a" (addr)); + "pmove %%psr,%0" + : "=m" (temp) : "a" (addr)); #endif mmusr = temp; diff --git a/arch/m68k/mm/cache.c b/arch/m68k/mm/cache.c index 5437fff5fe07..5550aa4fd811 100644 --- a/arch/m68k/mm/cache.c +++ b/arch/m68k/mm/cache.c @@ -52,9 +52,9 @@ static unsigned long virt_to_phys_slow(unsigned long vaddr) unsigned long *descaddr; asm volatile ("ptestr %3,%2@,#7,%0\n\t" - "pmove %%psr,%1@" - : "=a&" (descaddr) - : "a" (&mmusr), "a" (vaddr), "d" (get_fs().seg)); + "pmove %%psr,%1" + : "=a&" (descaddr), "=m" (mmusr) + : "a" (vaddr), "d" (get_fs().seg)); if (mmusr & (MMU_I|MMU_B|MMU_L)) return 0; descaddr = phys_to_virt((unsigned long)descaddr); From 9bf31efa84c898a0cf294bacdfe8edcac24e6318 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 18 Jan 2012 13:57:33 -0300 Subject: [PATCH 13/24] [media] cxd2820r: fix dvb_frontend_ops Fix bug introduced by multi-frontend to single-frontend change. * Add missing DVB-C caps * Change frontend name as single frontend does all the standards Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/cxd2820r_core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c b/drivers/media/dvb/frontends/cxd2820r_core.c index caae7f79c837..5fe591d226f5 100644 --- a/drivers/media/dvb/frontends/cxd2820r_core.c +++ b/drivers/media/dvb/frontends/cxd2820r_core.c @@ -562,7 +562,7 @@ static const struct dvb_frontend_ops cxd2820r_ops = { .delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A }, /* default: DVB-T/T2 */ .info = { - .name = "Sony CXD2820R (DVB-T/T2)", + .name = "Sony CXD2820R", .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | @@ -572,7 +572,9 @@ static const struct dvb_frontend_ops cxd2820r_ops = { FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_QAM_16 | + FE_CAN_QAM_32 | FE_CAN_QAM_64 | + FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | From c2bbbe7b5e79974c5ed1c828690731f6f5106bee Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Thu, 19 Jan 2012 14:46:43 -0300 Subject: [PATCH 14/24] [media] cxd2820r: remove unused parameter from cxd2820r_attach Fix bug introduced by multi-frontend to single-frontend change. This parameter is no longer used after multi-frontend to single-frontend change. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/anysee.c | 3 +-- drivers/media/dvb/frontends/cxd2820r.h | 6 ++---- drivers/media/dvb/frontends/cxd2820r_core.c | 3 +-- drivers/media/video/em28xx/em28xx-dvb.c | 3 +-- 4 files changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index ecc3addc77ec..7b77c7b29f65 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -887,8 +887,7 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) /* attach demod */ adap->fe_adap[state->fe_id].fe = dvb_attach(cxd2820r_attach, - &anysee_cxd2820r_config, &adap->dev->i2c_adap, - NULL); + &anysee_cxd2820r_config, &adap->dev->i2c_adap); state->has_ci = true; diff --git a/drivers/media/dvb/frontends/cxd2820r.h b/drivers/media/dvb/frontends/cxd2820r.h index cf0f546aa1d1..5aa306ebb7ef 100644 --- a/drivers/media/dvb/frontends/cxd2820r.h +++ b/drivers/media/dvb/frontends/cxd2820r.h @@ -77,14 +77,12 @@ struct cxd2820r_config { (defined(CONFIG_DVB_CXD2820R_MODULE) && defined(MODULE)) extern struct dvb_frontend *cxd2820r_attach( const struct cxd2820r_config *config, - struct i2c_adapter *i2c, - struct dvb_frontend *fe + struct i2c_adapter *i2c ); #else static inline struct dvb_frontend *cxd2820r_attach( const struct cxd2820r_config *config, - struct i2c_adapter *i2c, - struct dvb_frontend *fe + struct i2c_adapter *i2c ) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c b/drivers/media/dvb/frontends/cxd2820r_core.c index 5fe591d226f5..bdfa207a883e 100644 --- a/drivers/media/dvb/frontends/cxd2820r_core.c +++ b/drivers/media/dvb/frontends/cxd2820r_core.c @@ -604,8 +604,7 @@ static const struct dvb_frontend_ops cxd2820r_ops = { }; struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *cfg, - struct i2c_adapter *i2c, - struct dvb_frontend *fe) + struct i2c_adapter *i2c) { struct cxd2820r_priv *priv = NULL; int ret; diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 9449423098e0..aabbf4854f66 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -853,8 +853,7 @@ static int em28xx_dvb_init(struct em28xx *dev) case EM28174_BOARD_PCTV_290E: dvb->fe[0] = dvb_attach(cxd2820r_attach, &em28xx_cxd2820r_config, - &dev->i2c_adap, - NULL); + &dev->i2c_adap); if (dvb->fe[0]) { /* FE 0 attach tuner */ if (!dvb_attach(tda18271_attach, From 46de20a78ae4b122b79fc02633e9a6c3d539ecad Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Fri, 20 Jan 2012 17:39:17 -0300 Subject: [PATCH 15/24] [media] anysee: fix CI init No more error that error seen when device is plugged: dvb_ca adapter 0: Invalid PC card inserted :( Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/anysee.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index 7b77c7b29f65..fdee856acab0 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -1188,6 +1188,14 @@ static int anysee_ci_init(struct dvb_usb_device *d) if (ret) return ret; + ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 2)|(0 << 1)|(0 << 0), 0x07); + if (ret) + return ret; + + ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 2)|(1 << 1)|(1 << 0), 0x07); + if (ret) + return ret; + ret = dvb_ca_en50221_init(&d->adapter[0].dvb_adap, &state->ci, 0, 1); if (ret) return ret; From 72565224609a23a60d10fcdf42f87a2fa8f7b16d Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Fri, 20 Jan 2012 19:48:28 -0300 Subject: [PATCH 16/24] [media] cxd2820r: sleep on DVB-T/T2 delivery system switch Fix bug introduced by multi-frontend to single-frontend change. It is safer to put DVB-T parts sleeping when auto-switching to DVB-T2 and vice versa. That was original behaviour. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/cxd2820r_core.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c b/drivers/media/dvb/frontends/cxd2820r_core.c index bdfa207a883e..5c7c2aaf9bf5 100644 --- a/drivers/media/dvb/frontends/cxd2820r_core.c +++ b/drivers/media/dvb/frontends/cxd2820r_core.c @@ -482,10 +482,19 @@ static enum dvbfe_search cxd2820r_search(struct dvb_frontend *fe) /* switch between DVB-T and DVB-T2 when tune fails */ if (priv->last_tune_failed) { - if (priv->delivery_system == SYS_DVBT) + if (priv->delivery_system == SYS_DVBT) { + ret = cxd2820r_sleep_t(fe); + if (ret) + goto error; + c->delivery_system = SYS_DVBT2; - else if (priv->delivery_system == SYS_DVBT2) + } else if (priv->delivery_system == SYS_DVBT2) { + ret = cxd2820r_sleep_t2(fe); + if (ret) + goto error; + c->delivery_system = SYS_DVBT; + } } /* set frontend */ From 03652e0ad4b140523ec5ef7fec8d2b3c7218447b Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Wed, 11 Jan 2012 00:58:29 -0300 Subject: [PATCH 17/24] [media] V4L: atmel-isi: add clk_prepare()/clk_unprepare() functions Signed-off-by: Josh Wu Acked-by: Nicolas Ferre Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/atmel-isi.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c index 9fe4519176a4..ec3f6a06f9c3 100644 --- a/drivers/media/video/atmel-isi.c +++ b/drivers/media/video/atmel-isi.c @@ -922,7 +922,9 @@ static int __devexit atmel_isi_remove(struct platform_device *pdev) isi->fb_descriptors_phys); iounmap(isi->regs); + clk_unprepare(isi->mck); clk_put(isi->mck); + clk_unprepare(isi->pclk); clk_put(isi->pclk); kfree(isi); @@ -955,6 +957,10 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev) if (IS_ERR(pclk)) return PTR_ERR(pclk); + ret = clk_prepare(pclk); + if (ret) + goto err_clk_prepare_pclk; + isi = kzalloc(sizeof(struct atmel_isi), GFP_KERNEL); if (!isi) { ret = -ENOMEM; @@ -978,6 +984,10 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev) goto err_clk_get; } + ret = clk_prepare(isi->mck); + if (ret) + goto err_clk_prepare_mck; + /* Set ISI_MCK's frequency, it should be faster than pixel clock */ ret = clk_set_rate(isi->mck, pdata->mck_hz); if (ret < 0) @@ -1059,10 +1069,14 @@ err_alloc_ctx: isi->fb_descriptors_phys); err_alloc_descriptors: err_set_mck_rate: + clk_unprepare(isi->mck); +err_clk_prepare_mck: clk_put(isi->mck); err_clk_get: kfree(isi); err_alloc_isi: + clk_unprepare(pclk); +err_clk_prepare_pclk: clk_put(pclk); return ret; From c79eba92406acc4898adcd1689fc21a6aa91ed0b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 23 Jan 2012 13:15:22 -0200 Subject: [PATCH 18/24] [media] cinergyT2-fe: Fix bandwdith settings Changeset 7830bbaff9f mangled the bandwidth field for CinergyT2. Properly fill it. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/cinergyT2-fe.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-fe.c b/drivers/media/dvb/dvb-usb/cinergyT2-fe.c index 8a57ed8272de..1efc028a76c9 100644 --- a/drivers/media/dvb/dvb-usb/cinergyT2-fe.c +++ b/drivers/media/dvb/dvb-usb/cinergyT2-fe.c @@ -276,14 +276,15 @@ static int cinergyt2_fe_set_frontend(struct dvb_frontend *fe) param.flags = 0; switch (fep->bandwidth_hz) { + default: case 8000000: - param.bandwidth = 0; + param.bandwidth = 8; break; case 7000000: - param.bandwidth = 1; + param.bandwidth = 7; break; case 6000000: - param.bandwidth = 2; + param.bandwidth = 6; break; } From 5a51467b146ab7948d2f6812892eac120a30529c Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Wed, 18 Jan 2012 20:07:54 -0600 Subject: [PATCH 19/24] x86/uv: Fix uv_gpa_to_soc_phys_ram() shift uv_gpa_to_soc_phys_ram() was inadvertently ignoring the shift values. This fix takes the shift into account. Signed-off-by: Russ Anderson Cc: Link: http://lkml.kernel.org/r/20120119020753.GA7228@sgi.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/uv/uv_hub.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index 54a13aaebc40..21f7385badb8 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -318,13 +318,13 @@ uv_gpa_in_mmr_space(unsigned long gpa) /* UV global physical address --> socket phys RAM */ static inline unsigned long uv_gpa_to_soc_phys_ram(unsigned long gpa) { - unsigned long paddr = gpa & uv_hub_info->gpa_mask; + unsigned long paddr; unsigned long remap_base = uv_hub_info->lowmem_remap_base; unsigned long remap_top = uv_hub_info->lowmem_remap_top; gpa = ((gpa << uv_hub_info->m_shift) >> uv_hub_info->m_shift) | ((gpa >> uv_hub_info->n_lshift) << uv_hub_info->m_val); - gpa = gpa & uv_hub_info->gpa_mask; + paddr = gpa & uv_hub_info->gpa_mask; if (paddr >= remap_base && paddr < remap_base + remap_top) paddr -= remap_base; return paddr; From d2ebc71d472020bc30e29afe8c4d2a85a5b41f56 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Wed, 18 Jan 2012 09:40:47 -0600 Subject: [PATCH 20/24] x86/uv: Fix uninitialized spinlocks Initialize two spinlocks in tlb_uv.c and also properly define/initialize the uv_irq_lock. The lack of explicit initialization seems to be functionally harmless, but it is diagnosed when these are turned on: CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_LOCKDEP=y Signed-off-by: Cliff Wickman Cc: Cc: Dimitri Sivanich Link: http://lkml.kernel.org/r/E1RnXd1-0003wU-PM@eag09.americas.sgi.com [ Added the uv_irq_lock initialization fix by Dimitri Sivanich ] Signed-off-by: Ingo Molnar --- arch/x86/platform/uv/tlb_uv.c | 2 ++ arch/x86/platform/uv/uv_irq.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index 9be4cff00a2d..3ae0e61abd23 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -1851,6 +1851,8 @@ static void __init init_per_cpu_tunables(void) bcp->cong_reps = congested_reps; bcp->cong_period = congested_period; bcp->clocks_per_100_usec = usec_2_cycles(100); + spin_lock_init(&bcp->queue_lock); + spin_lock_init(&bcp->uvhub_lock); } } diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c index 374a05d8ad22..f25c2765a5c9 100644 --- a/arch/x86/platform/uv/uv_irq.c +++ b/arch/x86/platform/uv/uv_irq.c @@ -25,7 +25,7 @@ struct uv_irq_2_mmr_pnode{ int irq; }; -static spinlock_t uv_irq_lock; +static DEFINE_SPINLOCK(uv_irq_lock); static struct rb_root uv_irq_root; static int uv_set_irq_affinity(struct irq_data *, const struct cpumask *, bool); From 3fe54564a61f72982032423d24041dca30617ca2 Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Wed, 25 Jan 2012 14:35:49 +0800 Subject: [PATCH 21/24] x86/numachip: Drop unnecessary conflict with EDAC EDAC detection no longer crashes multi-node systems, so don't conflict on it with NumaChip. Signed-off-by: Daniel J Blueman Cc: Steffen Persvold Link: http://lkml.kernel.org/r/1327473349-28395-1-git-send-email-daniel@numascale-asia.com Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 864cc6e6ac8e..5bed94e189fa 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -360,7 +360,6 @@ config X86_NUMACHIP depends on NUMA depends on SMP depends on X86_X2APIC - depends on !EDAC_AMD64 ---help--- Adds support for Numascale NumaChip large-SMP systems. Needed to enable more than ~168 cores. From 5067cf53cac9b36d42ebb3a45bb12259d0bc1e68 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 23 Jan 2012 23:34:59 +0100 Subject: [PATCH 22/24] x86/boot-image: Don't leak phdrs in arch/x86/boot/compressed/misc.c::Parse_elf() We allocate memory with malloc(), but neglect to free it before the variable 'phdrs' goes out of scope --> leak. Signed-off-by: Jesper Juhl Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1201232332590.8772@swampdragon.chaosbits.net [ Mostly harmless. ] Signed-off-by: Ingo Molnar --- arch/x86/boot/compressed/misc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 3a19d04cebeb..7116dcba0c9e 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -321,6 +321,8 @@ static void parse_elf(void *output) default: /* Ignore other PT_* */ break; } } + + free(phdrs); } asmlinkage void decompress_kernel(void *rmode, memptr heap, From 652847aa449cfe364d40018849223f57f31a38e2 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 20 Jan 2012 17:38:23 +0100 Subject: [PATCH 23/24] x86/amd: Add missing feature flag for fam15h models 10h-1fh processors That is the last one missing for those CPUs. Others were recently added with commits fb215366b3c7320ac25dca766a0152df16534932 (KVM: expose latest Intel cpu new features (BMI1/BMI2/FMA/AVX2) to guest) and commit 969df4b82904a30fef19a67398a0c854d223ea67 (x86: Report cpb and eff_freq_ro flags correctly) Signed-off-by: Andreas Herrmann Link: http://lkml.kernel.org/r/20120120163823.GC24508@alberich.amd.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/cpufeature.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 17c5d4bdee5e..8d67d428b0f9 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -159,6 +159,7 @@ #define X86_FEATURE_WDT (6*32+13) /* Watchdog timer */ #define X86_FEATURE_LWP (6*32+15) /* Light Weight Profiling */ #define X86_FEATURE_FMA4 (6*32+16) /* 4 operands MAC instructions */ +#define X86_FEATURE_TCE (6*32+17) /* translation cache extension */ #define X86_FEATURE_NODEID_MSR (6*32+19) /* NodeId MSR */ #define X86_FEATURE_TBM (6*32+21) /* trailing bit manipulations */ #define X86_FEATURE_TOPOEXT (6*32+22) /* topology extensions CPUID leafs */ From 5b68edc91cdc972c46f76f85eded7ffddc3ff5c2 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 20 Jan 2012 17:44:12 +0100 Subject: [PATCH 24/24] x86/microcode_amd: Add support for CPU family specific container files We've decided to provide CPU family specific container files (starting with CPU family 15h). E.g. for family 15h we have to load microcode_amd_fam15h.bin instead of microcode_amd.bin Rationale is that starting with family 15h patch size is larger than 2KB which was hard coded as maximum patch size in various microcode loaders (not just Linux). Container files which include patches larger than 2KB cause different kinds of trouble with such old patch loaders. Thus we have to ensure that the default container file provides only patches with size less than 2KB. Signed-off-by: Andreas Herrmann Cc: Borislav Petkov Cc: Link: http://lkml.kernel.org/r/20120120164412.GD24508@alberich.amd.com [ documented the naming convention and tidied the code a bit. ] Signed-off-by: Ingo Molnar --- arch/x86/kernel/microcode_amd.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index fe86493f3ed1..ac0417be9131 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -311,13 +311,33 @@ out: return state; } +/* + * AMD microcode firmware naming convention, up to family 15h they are in + * the legacy file: + * + * amd-ucode/microcode_amd.bin + * + * This legacy file is always smaller than 2K in size. + * + * Starting at family 15h they are in family specific firmware files: + * + * amd-ucode/microcode_amd_fam15h.bin + * amd-ucode/microcode_amd_fam16h.bin + * ... + * + * These might be larger than 2K. + */ static enum ucode_state request_microcode_amd(int cpu, struct device *device) { - const char *fw_name = "amd-ucode/microcode_amd.bin"; + char fw_name[36] = "amd-ucode/microcode_amd.bin"; const struct firmware *fw; enum ucode_state ret = UCODE_NFOUND; + struct cpuinfo_x86 *c = &cpu_data(cpu); - if (request_firmware(&fw, fw_name, device)) { + if (c->x86 >= 0x15) + snprintf(fw_name, sizeof(fw_name), "amd-ucode/microcode_amd_fam%.2xh.bin", c->x86); + + if (request_firmware(&fw, (const char *)fw_name, device)) { pr_err("failed to load file %s\n", fw_name); goto out; }