Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (30 commits) Blackfin arch: If we double fault, rather than hang forever, reset Blackfin arch: When icache is off, make sure people know it Blackfin arch: Fix bug - skip single step in high priority interrupt handler instead of disabling all interrupts in single step debugging. Blackfin arch: cache the values of vco/sclk/cclk as the overhead of doing so (~24 bytes) is worth avoiding the software mult/div routines Blackfin arch: fix bug - IMDMA is not type struct dma_register Blackfin arch: check the EXTBANKS field of the DDRCTL1 register to see if we are using both memory banks Blackfin arch: Apply Bluetechnix CM-BF527 board support patch Blackfin arch: Add unwinding for stack info, and a little more detail on trace buffer Blackfin arch: Add ISP1760 board resources to BF548-EZKIT Blackfin arch: fix bug - detect 0.1 silicon revision BF527-EZKIT as 0.0 version Blackfin arch: add missing IORESOURCE_MEM flags to UART3 Blackfin arch: Add return value check in bfin_sir_probe(), remove SSYNC(). Blackfin arch: Extend sram malloc to handle L2 SRAM. Blackfin arch: Remove useless config option. Blackfin arch: change L1 malloc to base on slab cache and lists. Blackfin arch: use local labels and ENDPROC() markings Blackfin arch: Do not need this dualcore test module in kernel. Blackfin arch: Allow ptrace to peek and poke application data in L1 data SRAM. Blackfin arch: Add ANOMALY_05000368 workaround Blackfin arch: Functional power management support ...
This commit is contained in:
Linus Torvalds
commit
7f268a2ba7
|
|
@ -234,7 +234,7 @@ config MEM_MT48LC16M16A2TG_75
|
|||
bool
|
||||
depends on (BFIN533_EZKIT || BFIN561_EZKIT \
|
||||
|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
|
||||
|| H8606_HVSISTEMAS)
|
||||
|| H8606_HVSISTEMAS || BFIN527_BLUETECHNIX_CM)
|
||||
default y
|
||||
|
||||
config MEM_MT48LC32M8A2_75
|
||||
|
|
@ -310,25 +310,6 @@ config BFIN_KERNEL_CLOCK
|
|||
are also not changed, and the Bootloader does 100% of the hardware
|
||||
configuration.
|
||||
|
||||
config MEM_SIZE
|
||||
int "SDRAM Memory Size in MBytes"
|
||||
depends on BFIN_KERNEL_CLOCK
|
||||
default 64
|
||||
|
||||
config MEM_ADD_WIDTH
|
||||
int "Memory Address Width"
|
||||
depends on BFIN_KERNEL_CLOCK
|
||||
depends on (!BF54x)
|
||||
range 8 11
|
||||
default 9 if BFIN533_EZKIT
|
||||
default 9 if BFIN561_EZKIT
|
||||
default 9 if H8606_HVSISTEMAS
|
||||
default 10 if BFIN527_EZKIT
|
||||
default 10 if BFIN537_STAMP
|
||||
default 11 if BFIN533_STAMP
|
||||
default 10 if PNAV10
|
||||
default 10 if BFIN532_IP0X
|
||||
|
||||
config PLL_BYPASS
|
||||
bool "Bypass PLL"
|
||||
depends on BFIN_KERNEL_CLOCK
|
||||
|
|
@ -349,8 +330,7 @@ config VCO_MULT
|
|||
default "45" if BFIN533_STAMP
|
||||
default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM)
|
||||
default "22" if BFIN533_BLUETECHNIX_CM
|
||||
default "20" if BFIN537_BLUETECHNIX_CM
|
||||
default "20" if BFIN561_BLUETECHNIX_CM
|
||||
default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
|
||||
default "20" if BFIN561_EZKIT
|
||||
default "16" if H8606_HVSISTEMAS
|
||||
help
|
||||
|
|
@ -390,7 +370,7 @@ config SCLK_DIV
|
|||
|
||||
config MAX_MEM_SIZE
|
||||
int "Max SDRAM Memory Size in MBytes"
|
||||
depends on !BFIN_KERNEL_CLOCK && !MPU
|
||||
depends on !MPU
|
||||
default 512
|
||||
help
|
||||
This is the max memory size that the kernel will create CPLB
|
||||
|
|
@ -748,14 +728,6 @@ config BFIN_WT
|
|||
|
||||
endchoice
|
||||
|
||||
config L1_MAX_PIECE
|
||||
int "Set the max L1 SRAM pieces"
|
||||
default 16
|
||||
help
|
||||
Set the max memory pieces for the L1 SRAM allocation algorithm.
|
||||
Min value is 16. Max value is 1024.
|
||||
|
||||
|
||||
config MPU
|
||||
bool "Enable the memory protection unit (EXPERIMENTAL)"
|
||||
default n
|
||||
|
|
@ -899,7 +871,7 @@ config ARCH_SUSPEND_POSSIBLE
|
|||
depends on !SMP
|
||||
|
||||
choice
|
||||
prompt "Default Power Saving Mode"
|
||||
prompt "Standby Power Saving Mode"
|
||||
depends on PM
|
||||
default PM_BFIN_SLEEP_DEEPER
|
||||
config PM_BFIN_SLEEP_DEEPER
|
||||
|
|
@ -918,6 +890,8 @@ config PM_BFIN_SLEEP_DEEPER
|
|||
normal during Sleep Deeper, due to the reduced SCLK frequency.
|
||||
When in the sleep mode, system DMA access to L1 memory is not supported.
|
||||
|
||||
If unsure, select "Sleep Deeper".
|
||||
|
||||
config PM_BFIN_SLEEP
|
||||
bool "Sleep"
|
||||
help
|
||||
|
|
@ -925,15 +899,17 @@ config PM_BFIN_SLEEP
|
|||
dissipation by disabling the clock to the processor core (CCLK).
|
||||
The PLL and system clock (SCLK), however, continue to operate in
|
||||
this mode. Typically an external event or RTC activity will wake
|
||||
up the processor. When in the sleep mode,
|
||||
system DMA access to L1 memory is not supported.
|
||||
up the processor. When in the sleep mode, system DMA access to L1
|
||||
memory is not supported.
|
||||
|
||||
If unsure, select "Sleep Deeper".
|
||||
endchoice
|
||||
|
||||
config PM_WAKEUP_BY_GPIO
|
||||
bool "Cause Wakeup Event by GPIO"
|
||||
bool "Allow Wakeup from Standby by GPIO"
|
||||
|
||||
config PM_WAKEUP_GPIO_NUMBER
|
||||
int "Wakeup GPIO number"
|
||||
int "GPIO number"
|
||||
range 0 47
|
||||
depends on PM_WAKEUP_BY_GPIO
|
||||
default 2 if BFIN537_STAMP
|
||||
|
|
@ -954,6 +930,58 @@ config PM_WAKEUP_GPIO_POLAR_EDGE_B
|
|||
bool "Both EDGE"
|
||||
endchoice
|
||||
|
||||
comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
|
||||
depends on PM
|
||||
|
||||
config PM_BFIN_WAKE_RTC
|
||||
bool "Allow Wake-Up from RESET and on-chip RTC"
|
||||
depends on PM
|
||||
default n
|
||||
help
|
||||
Enable RTC Wake-Up (Voltage Regulator Power-Up)
|
||||
|
||||
config PM_BFIN_WAKE_PH6
|
||||
bool "Allow Wake-Up from on-chip PHY or PH6 GP"
|
||||
depends on PM && (BF52x || BF534 || BF536 || BF537)
|
||||
default n
|
||||
help
|
||||
Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
|
||||
|
||||
config PM_BFIN_WAKE_CAN
|
||||
bool "Allow Wake-Up from on-chip CAN0/1"
|
||||
depends on PM && (BF54x || BF534 || BF536 || BF537)
|
||||
default n
|
||||
help
|
||||
Enable CAN0/1 Wake-Up (Voltage Regulator Power-Up)
|
||||
|
||||
config PM_BFIN_WAKE_GP
|
||||
bool "Allow Wake-Up from GPIOs"
|
||||
depends on PM && BF54x
|
||||
default n
|
||||
help
|
||||
Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
|
||||
|
||||
config PM_BFIN_WAKE_USB
|
||||
bool "Allow Wake-Up from on-chip USB"
|
||||
depends on PM && (BF54x || BF52x)
|
||||
default n
|
||||
help
|
||||
Enable USB Wake-Up (Voltage Regulator Power-Up)
|
||||
|
||||
config PM_BFIN_WAKE_KEYPAD
|
||||
bool "Allow Wake-Up from on-chip Keypad"
|
||||
depends on PM && BF54x
|
||||
default n
|
||||
help
|
||||
Enable Keypad Wake-Up (Voltage Regulator Power-Up)
|
||||
|
||||
config PM_BFIN_WAKE_ROTARY
|
||||
bool "Allow Wake-Up from on-chip Rotary"
|
||||
depends on PM && BF54x
|
||||
default n
|
||||
help
|
||||
Enable Rotary Wake-Up (Voltage Regulator Power-Up)
|
||||
|
||||
endmenu
|
||||
|
||||
menu "CPU Frequency scaling"
|
||||
|
|
|
|||
|
|
@ -154,13 +154,6 @@ config EARLY_PRINTK
|
|||
all of this lives in the init section and is thrown away after the
|
||||
kernel boots completely.
|
||||
|
||||
config DUAL_CORE_TEST_MODULE
|
||||
tristate "Dual Core Test Module"
|
||||
depends on (BF561)
|
||||
default n
|
||||
help
|
||||
Say Y here to build-in dual core test module for dual core test.
|
||||
|
||||
config CPLB_INFO
|
||||
bool "Display the CPLB information"
|
||||
help
|
||||
|
|
|
|||
|
|
@ -6,8 +6,9 @@
|
|||
# for more details.
|
||||
#
|
||||
|
||||
|
||||
CROSS_COMPILE ?= bfin-uclinux-
|
||||
ifeq ($(CROSS_COMPILE),)
|
||||
CROSS_COMPILE := bfin-uclinux-
|
||||
endif
|
||||
LDFLAGS_vmlinux := -X
|
||||
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
|
||||
GZFLAGS := -9
|
||||
|
|
|
|||
|
|
@ -1,7 +1,6 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.24.7
|
||||
# Fri May 16 10:02:29 2008
|
||||
#
|
||||
# CONFIG_MMU is not set
|
||||
# CONFIG_FPU is not set
|
||||
|
|
@ -290,7 +289,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
|
|||
# CONFIG_RESOURCES_64BIT is not set
|
||||
CONFIG_ZONE_DMA_FLAG=1
|
||||
CONFIG_VIRT_TO_BUS=y
|
||||
# CONFIG_BFIN_GPTIMERS is not set
|
||||
CONFIG_BFIN_GPTIMERS=y
|
||||
CONFIG_BFIN_DMA_5XX=y
|
||||
# CONFIG_DMA_UNCACHED_4M is not set
|
||||
# CONFIG_DMA_UNCACHED_2M is not set
|
||||
|
|
@ -430,7 +429,58 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
|
|||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
CONFIG_IRDA=m
|
||||
|
||||
#
|
||||
# IrDA protocols
|
||||
#
|
||||
CONFIG_IRLAN=m
|
||||
CONFIG_IRCOMM=m
|
||||
# CONFIG_IRDA_ULTRA is not set
|
||||
|
||||
#
|
||||
# IrDA options
|
||||
#
|
||||
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
|
||||
# CONFIG_IRDA_FAST_RR is not set
|
||||
# CONFIG_IRDA_DEBUG is not set
|
||||
|
||||
#
|
||||
# Infrared-port device drivers
|
||||
#
|
||||
|
||||
#
|
||||
# SIR device drivers
|
||||
#
|
||||
CONFIG_IRTTY_SIR=m
|
||||
CONFIG_BFIN_SIR=m
|
||||
CONFIG_BFIN_SIR0=y
|
||||
CONFIG_SIR_BFIN_DMA=y
|
||||
# CONFIG_SIR_BFIN_PIO is not set
|
||||
|
||||
#
|
||||
# Dongle support
|
||||
#
|
||||
# CONFIG_DONGLE is not set
|
||||
# CONFIG_KINGSUN_DONGLE is not set
|
||||
# CONFIG_KSDAZZLE_DONGLE is not set
|
||||
# CONFIG_KS959_DONGLE is not set
|
||||
|
||||
#
|
||||
# Old SIR device drivers
|
||||
#
|
||||
# CONFIG_IRPORT_SIR is not set
|
||||
|
||||
#
|
||||
# Old Serial dongle support
|
||||
#
|
||||
|
||||
#
|
||||
# FIR device drivers
|
||||
#
|
||||
# CONFIG_USB_IRDA is not set
|
||||
# CONFIG_SIGMATEL_FIR is not set
|
||||
# CONFIG_MCS_FIR is not set
|
||||
# CONFIG_BT is not set
|
||||
# CONFIG_AF_RXRPC is not set
|
||||
|
||||
|
|
@ -689,8 +739,11 @@ CONFIG_BFIN_OTP=y
|
|||
# CONFIG_BFIN_SPORT is not set
|
||||
# CONFIG_BFIN_TIMER_LATENCY is not set
|
||||
# CONFIG_TWI_LCD is not set
|
||||
# CONFIG_SIMPLE_GPIO is not set
|
||||
# CONFIG_VT is not set
|
||||
CONFIG_SIMPLE_GPIO=m
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_HW_CONSOLE=y
|
||||
# CONFIG_VT_HW_CONSOLE_BINDING is not set
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
|
|
@ -872,18 +925,136 @@ CONFIG_SSB_POSSIBLE=y
|
|||
#
|
||||
# CONFIG_VGASTATE is not set
|
||||
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
||||
# CONFIG_FB is not set
|
||||
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||
CONFIG_FB=y
|
||||
# CONFIG_FIRMWARE_EDID is not set
|
||||
# CONFIG_FB_DDC is not set
|
||||
CONFIG_FB_CFB_FILLRECT=y
|
||||
CONFIG_FB_CFB_COPYAREA=y
|
||||
CONFIG_FB_CFB_IMAGEBLIT=y
|
||||
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
||||
# CONFIG_FB_SYS_FILLRECT is not set
|
||||
# CONFIG_FB_SYS_COPYAREA is not set
|
||||
# CONFIG_FB_SYS_IMAGEBLIT is not set
|
||||
# CONFIG_FB_SYS_FOPS is not set
|
||||
CONFIG_FB_DEFERRED_IO=y
|
||||
# CONFIG_FB_SVGALIB is not set
|
||||
# CONFIG_FB_MACMODES is not set
|
||||
# CONFIG_FB_BACKLIGHT is not set
|
||||
# CONFIG_FB_MODE_HELPERS is not set
|
||||
# CONFIG_FB_TILEBLITTING is not set
|
||||
|
||||
#
|
||||
# Frame buffer hardware drivers
|
||||
#
|
||||
CONFIG_FB_BFIN_T350MCQB=y
|
||||
# CONFIG_FB_BFIN_7393 is not set
|
||||
# CONFIG_FB_S1D13XXX is not set
|
||||
# CONFIG_FB_VIRTUAL is not set
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_LCD_CLASS_DEVICE=m
|
||||
CONFIG_LCD_LTV350QV=m
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=m
|
||||
# CONFIG_BACKLIGHT_CORGI is not set
|
||||
|
||||
#
|
||||
# Display device support
|
||||
#
|
||||
# CONFIG_DISPLAY_SUPPORT is not set
|
||||
|
||||
#
|
||||
# Console display driver support
|
||||
#
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
|
||||
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
||||
# CONFIG_FONTS is not set
|
||||
CONFIG_FONT_8x8=y
|
||||
CONFIG_FONT_8x16=y
|
||||
CONFIG_LOGO=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
# CONFIG_LOGO_LINUX_CLUT224 is not set
|
||||
# CONFIG_LOGO_BLACKFIN_VGA16 is not set
|
||||
CONFIG_LOGO_BLACKFIN_CLUT224=y
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
CONFIG_SOUND=m
|
||||
|
||||
#
|
||||
# Advanced Linux Sound Architecture
|
||||
#
|
||||
CONFIG_SND=m
|
||||
CONFIG_SND_TIMER=m
|
||||
CONFIG_SND_PCM=m
|
||||
# CONFIG_SND_SEQUENCER is not set
|
||||
# CONFIG_SND_MIXER_OSS is not set
|
||||
# CONFIG_SND_PCM_OSS is not set
|
||||
# CONFIG_SND_DYNAMIC_MINORS is not set
|
||||
CONFIG_SND_SUPPORT_OLD_API=y
|
||||
CONFIG_SND_VERBOSE_PROCFS=y
|
||||
# CONFIG_SND_VERBOSE_PRINTK is not set
|
||||
# CONFIG_SND_DEBUG is not set
|
||||
|
||||
#
|
||||
# Generic devices
|
||||
#
|
||||
# CONFIG_SND_DUMMY is not set
|
||||
# CONFIG_SND_MTPAV is not set
|
||||
# CONFIG_SND_SERIAL_U16550 is not set
|
||||
# CONFIG_SND_MPU401 is not set
|
||||
|
||||
#
|
||||
# SPI devices
|
||||
#
|
||||
|
||||
#
|
||||
# ALSA Blackfin devices
|
||||
#
|
||||
# CONFIG_SND_BLACKFIN_AD1836 is not set
|
||||
# CONFIG_SND_BLACKFIN_AD1836_TDM is not set
|
||||
# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
|
||||
# CONFIG_SND_BLACKFIN_AD1836_MULSUB is not set
|
||||
# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
|
||||
# CONFIG_SND_BFIN_AD73311 is not set
|
||||
# CONFIG_SND_BFIN_AD73322 is not set
|
||||
|
||||
#
|
||||
# USB devices
|
||||
#
|
||||
# CONFIG_SND_USB_AUDIO is not set
|
||||
# CONFIG_SND_USB_CAIAQ is not set
|
||||
|
||||
#
|
||||
# System on Chip audio support
|
||||
#
|
||||
CONFIG_SND_SOC_AC97_BUS=y
|
||||
CONFIG_SND_SOC=m
|
||||
CONFIG_SND_BF5XX_SOC=m
|
||||
CONFIG_SND_MMAP_SUPPORT=y
|
||||
CONFIG_SND_BF5XX_SOC_I2S=m
|
||||
CONFIG_SND_BF5XX_SOC_AC97=m
|
||||
# CONFIG_SND_BF5XX_SOC_WM8750 is not set
|
||||
# CONFIG_SND_BF5XX_SOC_WM8731 is not set
|
||||
CONFIG_SND_BF5XX_SOC_SSM2602=m
|
||||
CONFIG_SND_BF5XX_SOC_BF5xx=m
|
||||
CONFIG_SND_BF5XX_SPORT_NUM=0
|
||||
# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
|
||||
|
||||
#
|
||||
# SoC Audio support for SuperH
|
||||
#
|
||||
CONFIG_SND_SOC_SSM2602=m
|
||||
# CONFIG_SND_SOC_SSM2602_SPI is not set
|
||||
CONFIG_SND_SOC_AD1980=m
|
||||
|
||||
#
|
||||
# Open Sound System
|
||||
#
|
||||
# CONFIG_SOUND_PRIME is not set
|
||||
CONFIG_AC97_BUS=m
|
||||
CONFIG_HID_SUPPORT=y
|
||||
CONFIG_HID=y
|
||||
# CONFIG_HID_DEBUG is not set
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.22.16
|
||||
# Linux kernel version: 2.6.24.7
|
||||
#
|
||||
# CONFIG_MMU is not set
|
||||
# CONFIG_FPU is not set
|
||||
|
|
@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|||
CONFIG_GENERIC_HWEIGHT=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
CONFIG_GENERIC_IRQ_PROBE=y
|
||||
CONFIG_GENERIC_TIME=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_FORCE_MAX_ZONEORDER=14
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
# General setup
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
CONFIG_LOCALVERSION_AUTO=y
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_IPC_NS is not set
|
||||
CONFIG_SYSVIPC_SYSCTL=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
# CONFIG_TASKSTATS is not set
|
||||
# CONFIG_UTS_NS is not set
|
||||
# CONFIG_USER_NS is not set
|
||||
# CONFIG_PID_NS is not set
|
||||
# CONFIG_AUDIT is not set
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
# CONFIG_CGROUPS is not set
|
||||
CONFIG_FAIR_GROUP_SCHED=y
|
||||
CONFIG_FAIR_USER_SCHED=y
|
||||
# CONFIG_FAIR_CGROUP_SCHED is not set
|
||||
CONFIG_SYSFS_DEPRECATED=y
|
||||
# CONFIG_RELAY is not set
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
|
|
@ -64,32 +63,24 @@ CONFIG_EPOLL=y
|
|||
CONFIG_SIGNALFD=y
|
||||
CONFIG_EVENTFD=y
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
|
||||
# CONFIG_NP2 is not set
|
||||
CONFIG_SLAB=y
|
||||
# CONFIG_SLUB is not set
|
||||
# CONFIG_SLOB is not set
|
||||
CONFIG_SLABINFO=y
|
||||
CONFIG_RT_MUTEXES=y
|
||||
CONFIG_TINY_SHMEM=y
|
||||
CONFIG_BASE_SMALL=0
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
CONFIG_KMOD=y
|
||||
|
||||
#
|
||||
# Block layer
|
||||
#
|
||||
CONFIG_BLOCK=y
|
||||
# CONFIG_LBD is not set
|
||||
# CONFIG_BLK_DEV_IO_TRACE is not set
|
||||
# CONFIG_LSF is not set
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
|
|
@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y
|
|||
# CONFIG_BF_REV_ANY is not set
|
||||
# CONFIG_BF_REV_NONE is not set
|
||||
CONFIG_BF53x=y
|
||||
CONFIG_BFIN_SINGLE_CORE=y
|
||||
CONFIG_MEM_MT48LC16M16A2TG_75=y
|
||||
CONFIG_BFIN533_EZKIT=y
|
||||
# CONFIG_BFIN533_STAMP is not set
|
||||
# CONFIG_BFIN533_BLUETECHNIX_CM is not set
|
||||
# CONFIG_H8606_HVSISTEMAS is not set
|
||||
# CONFIG_BFIN532_IP0X is not set
|
||||
# CONFIG_GENERIC_BF533_BOARD is not set
|
||||
|
||||
#
|
||||
|
|
@ -189,12 +180,14 @@ CONFIG_WDTIMER=13
|
|||
# Board customizations
|
||||
#
|
||||
# CONFIG_CMDLINE_BOOL is not set
|
||||
CONFIG_BOOT_LOAD=0x1000
|
||||
|
||||
#
|
||||
# Clock/PLL Setup
|
||||
#
|
||||
CONFIG_CLKIN_HZ=27000000
|
||||
# CONFIG_BFIN_KERNEL_CLOCK is not set
|
||||
CONFIG_MAX_MEM_SIZE=512
|
||||
CONFIG_MAX_VCO_HZ=750000000
|
||||
CONFIG_MIN_VCO_HZ=50000000
|
||||
CONFIG_MAX_SCLK_HZ=133333333
|
||||
|
|
@ -208,13 +201,17 @@ CONFIG_HZ_250=y
|
|||
# CONFIG_HZ_300 is not set
|
||||
# CONFIG_HZ_1000 is not set
|
||||
CONFIG_HZ=250
|
||||
CONFIG_GENERIC_TIME=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
# CONFIG_CYCLES_CLOCKSOURCE is not set
|
||||
CONFIG_TICK_ONESHOT=y
|
||||
# CONFIG_NO_HZ is not set
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
|
||||
#
|
||||
# Memory Setup
|
||||
# Misc
|
||||
#
|
||||
CONFIG_MAX_MEM_SIZE=512
|
||||
CONFIG_MEM_ADD_WIDTH=9
|
||||
CONFIG_BOOT_LOAD=0x1000
|
||||
CONFIG_BFIN_SCRATCH_REG_RETN=y
|
||||
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
|
||||
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
|
||||
|
|
@ -250,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y
|
|||
CONFIG_FLATMEM=y
|
||||
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4
|
||||
# CONFIG_RESOURCES_64BIT is not set
|
||||
CONFIG_ZONE_DMA_FLAG=1
|
||||
CONFIG_LARGE_ALLOCS=y
|
||||
CONFIG_VIRT_TO_BUS=y
|
||||
# CONFIG_BFIN_GPTIMERS is not set
|
||||
CONFIG_BFIN_DMA_5XX=y
|
||||
# CONFIG_DMA_UNCACHED_4M is not set
|
||||
# CONFIG_DMA_UNCACHED_2M is not set
|
||||
CONFIG_DMA_UNCACHED_1M=y
|
||||
# CONFIG_DMA_UNCACHED_NONE is not set
|
||||
|
|
@ -293,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y
|
|||
CONFIG_BANK_0=0x7BB0
|
||||
CONFIG_BANK_1=0x7BB0
|
||||
CONFIG_BANK_2=0x7BB0
|
||||
CONFIG_BANK_3=0xAAC3
|
||||
CONFIG_BANK_3=0xAAC2
|
||||
|
||||
#
|
||||
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
|
||||
#
|
||||
# CONFIG_PCI is not set
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
|
|
@ -321,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y
|
|||
CONFIG_PM=y
|
||||
# CONFIG_PM_LEGACY is not set
|
||||
# CONFIG_PM_DEBUG is not set
|
||||
# CONFIG_PM_SYSFS_DEPRECATED is not set
|
||||
CONFIG_PM_SLEEP=y
|
||||
CONFIG_SUSPEND_UP_POSSIBLE=y
|
||||
CONFIG_SUSPEND=y
|
||||
CONFIG_PM_BFIN_SLEEP_DEEPER=y
|
||||
# CONFIG_PM_BFIN_SLEEP is not set
|
||||
# CONFIG_PM_WAKEUP_BY_GPIO is not set
|
||||
|
|
@ -367,6 +364,7 @@ CONFIG_SYN_COOKIES=y
|
|||
CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
||||
CONFIG_INET_XFRM_MODE_TUNNEL=y
|
||||
CONFIG_INET_XFRM_MODE_BEET=y
|
||||
# CONFIG_INET_LRO is not set
|
||||
CONFIG_INET_DIAG=y
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
|
|
@ -393,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
|
|||
# CONFIG_LAPB is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
|
||||
#
|
||||
|
|
@ -428,6 +422,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
|
|||
# SIR device drivers
|
||||
#
|
||||
CONFIG_IRTTY_SIR=m
|
||||
# CONFIG_BFIN_SIR is not set
|
||||
|
||||
#
|
||||
# Dongle support
|
||||
|
|
@ -457,6 +452,7 @@ CONFIG_IRTTY_SIR=m
|
|||
# CONFIG_MAC80211 is not set
|
||||
# CONFIG_IEEE80211 is not set
|
||||
# CONFIG_RFKILL is not set
|
||||
# CONFIG_NET_9P is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
|
|
@ -465,14 +461,11 @@ CONFIG_IRTTY_SIR=m
|
|||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
# CONFIG_SYS_HYPERVISOR is not set
|
||||
|
||||
#
|
||||
# Connector - unified userspace <-> kernelspace linker
|
||||
#
|
||||
# CONFIG_CONNECTOR is not set
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
|
|
@ -492,6 +485,7 @@ CONFIG_MTD_BLOCK=y
|
|||
# CONFIG_INFTL is not set
|
||||
# CONFIG_RFD_FTL is not set
|
||||
# CONFIG_SSFDC is not set
|
||||
# CONFIG_MTD_OOPS is not set
|
||||
|
||||
#
|
||||
# RAM/ROM/Flash chip drivers
|
||||
|
|
@ -548,20 +542,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
|
|||
# UBI - Unsorted block images
|
||||
#
|
||||
# CONFIG_MTD_UBI is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
# CONFIG_PNPACPI is not set
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
CONFIG_BLK_DEV=y
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
|
|
@ -571,10 +553,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
|
|||
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
CONFIG_MISC_DEVICES=y
|
||||
# CONFIG_EEPROM_93CX6 is not set
|
||||
# CONFIG_IDE is not set
|
||||
|
||||
#
|
||||
|
|
@ -582,32 +562,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|||
#
|
||||
# CONFIG_RAID_ATTRS is not set
|
||||
# CONFIG_SCSI is not set
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
# CONFIG_SCSI_NETLINK is not set
|
||||
# CONFIG_ATA is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Network device support
|
||||
#
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_MACVLAN is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
# CONFIG_VETH is not set
|
||||
# CONFIG_PHYLIB is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_SMC91X=y
|
||||
# CONFIG_SMSC911X is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
||||
# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
||||
# CONFIG_IBM_NEW_EMAC_TAH is not set
|
||||
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
||||
# CONFIG_B44 is not set
|
||||
CONFIG_NETDEV_1000=y
|
||||
# CONFIG_AX88180 is not set
|
||||
CONFIG_NETDEV_10000=y
|
||||
|
|
@ -624,15 +601,7 @@ CONFIG_NETDEV_10000=y
|
|||
# CONFIG_NETCONSOLE is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Telephony Support
|
||||
#
|
||||
# CONFIG_PHONE is not set
|
||||
|
||||
#
|
||||
|
|
@ -647,7 +616,6 @@ CONFIG_INPUT=m
|
|||
#
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
CONFIG_INPUT_EVDEV=m
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
|
|
@ -672,13 +640,12 @@ CONFIG_INPUT_EVDEV=m
|
|||
#
|
||||
# CONFIG_AD9960 is not set
|
||||
# CONFIG_SPI_ADC_BF533 is not set
|
||||
# CONFIG_BF5xx_PFLAGS is not set
|
||||
# CONFIG_BF5xx_PPIFCD is not set
|
||||
# CONFIG_BFIN_SIMPLE_TIMER is not set
|
||||
# CONFIG_BF5xx_PPI is not set
|
||||
CONFIG_BFIN_SPORT=y
|
||||
# CONFIG_BFIN_TIMER_LATENCY is not set
|
||||
# CONFIG_AD5304 is not set
|
||||
CONFIG_SIMPLE_GPIO=m
|
||||
# CONFIG_VT is not set
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
|
|
@ -706,28 +673,11 @@ CONFIG_UNIX98_PTYS=y
|
|||
# CAN, the car bus and industrial fieldbus
|
||||
#
|
||||
# CONFIG_CAN4LINUX is not set
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
# CONFIG_WATCHDOG_NOWAYOUT is not set
|
||||
|
||||
#
|
||||
# Watchdog Device Drivers
|
||||
#
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
CONFIG_BFIN_WDT=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
# CONFIG_GEN_RTC is not set
|
||||
CONFIG_BLACKFIN_DPMC=y
|
||||
# CONFIG_R3964 is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
# CONFIG_TCG_TPM is not set
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
|
|
@ -748,22 +698,37 @@ CONFIG_SPI_BFIN=y
|
|||
#
|
||||
# CONFIG_SPI_AT25 is not set
|
||||
# CONFIG_SPI_SPIDEV is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_SPI_TLE62X0 is not set
|
||||
# CONFIG_W1 is not set
|
||||
# CONFIG_POWER_SUPPLY is not set
|
||||
CONFIG_HWMON=y
|
||||
# CONFIG_HWMON_VID is not set
|
||||
# CONFIG_SENSORS_ABITUGURU is not set
|
||||
# CONFIG_SENSORS_F71805F is not set
|
||||
# CONFIG_SENSORS_F71882FG is not set
|
||||
# CONFIG_SENSORS_IT87 is not set
|
||||
# CONFIG_SENSORS_LM70 is not set
|
||||
# CONFIG_SENSORS_PC87360 is not set
|
||||
# CONFIG_SENSORS_PC87427 is not set
|
||||
# CONFIG_SENSORS_SMSC47M1 is not set
|
||||
# CONFIG_SENSORS_SMSC47B397 is not set
|
||||
# CONFIG_SENSORS_VT1211 is not set
|
||||
# CONFIG_SENSORS_W83627HF is not set
|
||||
# CONFIG_SENSORS_W83627EHF is not set
|
||||
# CONFIG_HWMON_DEBUG_CHIP is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
# CONFIG_WATCHDOG_NOWAYOUT is not set
|
||||
|
||||
#
|
||||
# Watchdog Device Drivers
|
||||
#
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
CONFIG_BFIN_WDT=y
|
||||
|
||||
#
|
||||
# Sonics Silicon Backplane
|
||||
#
|
||||
CONFIG_SSB_POSSIBLE=y
|
||||
# CONFIG_SSB is not set
|
||||
|
||||
#
|
||||
# Multifunction device drivers
|
||||
|
|
@ -780,72 +745,27 @@ CONFIG_DAB=y
|
|||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_VGASTATE is not set
|
||||
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
||||
# CONFIG_FB is not set
|
||||
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||
|
||||
#
|
||||
# Display device support
|
||||
#
|
||||
# CONFIG_DISPLAY_SUPPORT is not set
|
||||
# CONFIG_VGASTATE is not set
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# HID Devices
|
||||
#
|
||||
CONFIG_HID_SUPPORT=y
|
||||
CONFIG_HID=m
|
||||
# CONFIG_HID_DEBUG is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
# CONFIG_USB is not set
|
||||
|
||||
#
|
||||
# Enable Host or Gadget support to see Inventra options
|
||||
#
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
# CONFIG_HIDRAW is not set
|
||||
# CONFIG_USB_SUPPORT is not set
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# LED devices
|
||||
#
|
||||
# CONFIG_NEW_LEDS is not set
|
||||
|
||||
#
|
||||
# LED drivers
|
||||
#
|
||||
|
||||
#
|
||||
# LED Triggers
|
||||
#
|
||||
|
||||
#
|
||||
# InfiniBand support
|
||||
#
|
||||
|
||||
#
|
||||
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
|
||||
#
|
||||
|
||||
#
|
||||
# Real Time Clock
|
||||
#
|
||||
CONFIG_RTC_LIB=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_HCTOSYS=y
|
||||
|
|
@ -861,10 +781,6 @@ CONFIG_RTC_INTF_DEV=y
|
|||
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
||||
# CONFIG_RTC_DRV_TEST is not set
|
||||
|
||||
#
|
||||
# I2C RTC drivers
|
||||
#
|
||||
|
||||
#
|
||||
# SPI RTC drivers
|
||||
#
|
||||
|
|
@ -875,8 +791,10 @@ CONFIG_RTC_INTF_DEV=y
|
|||
# Platform RTC drivers
|
||||
#
|
||||
# CONFIG_RTC_DRV_DS1553 is not set
|
||||
# CONFIG_RTC_DRV_STK17TA8 is not set
|
||||
# CONFIG_RTC_DRV_DS1742 is not set
|
||||
# CONFIG_RTC_DRV_M48T86 is not set
|
||||
# CONFIG_RTC_DRV_M48T59 is not set
|
||||
# CONFIG_RTC_DRV_V3020 is not set
|
||||
|
||||
#
|
||||
|
|
@ -885,22 +803,9 @@ CONFIG_RTC_INTF_DEV=y
|
|||
CONFIG_RTC_DRV_BFIN=y
|
||||
|
||||
#
|
||||
# DMA Engine support
|
||||
# Userspace I/O
|
||||
#
|
||||
# CONFIG_DMA_ENGINE is not set
|
||||
|
||||
#
|
||||
# DMA Clients
|
||||
#
|
||||
|
||||
#
|
||||
# DMA Devices
|
||||
#
|
||||
|
||||
#
|
||||
# PBX support
|
||||
#
|
||||
# CONFIG_PBX is not set
|
||||
# CONFIG_UIO is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
|
|
@ -945,7 +850,6 @@ CONFIG_PROC_SYSCTL=y
|
|||
CONFIG_SYSFS=y
|
||||
# CONFIG_TMPFS is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
# CONFIG_CONFIGFS_FS is not set
|
||||
|
||||
#
|
||||
|
|
@ -971,10 +875,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|||
CONFIG_JFFS2_FS=m
|
||||
CONFIG_JFFS2_FS_DEBUG=0
|
||||
CONFIG_JFFS2_FS_WRITEBUFFER=y
|
||||
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
|
||||
# CONFIG_JFFS2_SUMMARY is not set
|
||||
# CONFIG_JFFS2_FS_XATTR is not set
|
||||
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
||||
CONFIG_JFFS2_ZLIB=y
|
||||
# CONFIG_JFFS2_LZO is not set
|
||||
CONFIG_JFFS2_RTIME=y
|
||||
# CONFIG_JFFS2_RUBIN is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
|
|
@ -983,10 +889,7 @@ CONFIG_JFFS2_RTIME=y
|
|||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NETWORK_FILESYSTEMS=y
|
||||
CONFIG_NFS_FS=m
|
||||
CONFIG_NFS_V3=y
|
||||
# CONFIG_NFS_V3_ACL is not set
|
||||
|
|
@ -1006,17 +909,12 @@ CONFIG_SMB_FS=m
|
|||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
# CONFIG_9P_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
CONFIG_NLS=m
|
||||
CONFIG_NLS_DEFAULT="iso8859-1"
|
||||
# CONFIG_NLS_CODEPAGE_437 is not set
|
||||
|
|
@ -1057,21 +955,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
|
|||
# CONFIG_NLS_KOI8_R is not set
|
||||
# CONFIG_NLS_KOI8_U is not set
|
||||
# CONFIG_NLS_UTF8 is not set
|
||||
|
||||
#
|
||||
# Distributed Lock Manager
|
||||
#
|
||||
# CONFIG_DLM is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
CONFIG_INSTRUMENTATION=y
|
||||
# CONFIG_PROFILING is not set
|
||||
# CONFIG_MARKERS is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_ENABLE_WARN_DEPRECATED=y
|
||||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
|
|
@ -1079,6 +972,7 @@ CONFIG_DEBUG_FS=y
|
|||
# CONFIG_HEADERS_CHECK is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_SAMPLES is not set
|
||||
CONFIG_DEBUG_MMRS=y
|
||||
CONFIG_DEBUG_HUNT_FOR_ZERO=y
|
||||
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
|
||||
|
|
@ -1098,11 +992,7 @@ CONFIG_ACCESS_CHECK=y
|
|||
# CONFIG_KEYS is not set
|
||||
CONFIG_SECURITY=y
|
||||
# CONFIG_SECURITY_NETWORK is not set
|
||||
CONFIG_SECURITY_CAPABILITIES=m
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_SECURITY_CAPABILITIES is not set
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
|
|
@ -1113,6 +1003,7 @@ CONFIG_CRC_CCITT=m
|
|||
# CONFIG_CRC16 is not set
|
||||
# CONFIG_CRC_ITU_T is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_CRC7 is not set
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZLIB_DEFLATE=m
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.22.16
|
||||
# Linux kernel version: 2.6.24.7
|
||||
#
|
||||
# CONFIG_MMU is not set
|
||||
# CONFIG_FPU is not set
|
||||
|
|
@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|||
CONFIG_GENERIC_HWEIGHT=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
CONFIG_GENERIC_IRQ_PROBE=y
|
||||
CONFIG_GENERIC_TIME=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_FORCE_MAX_ZONEORDER=14
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
# General setup
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
CONFIG_LOCALVERSION_AUTO=y
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_IPC_NS is not set
|
||||
CONFIG_SYSVIPC_SYSCTL=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
# CONFIG_TASKSTATS is not set
|
||||
# CONFIG_UTS_NS is not set
|
||||
# CONFIG_USER_NS is not set
|
||||
# CONFIG_PID_NS is not set
|
||||
# CONFIG_AUDIT is not set
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
# CONFIG_CGROUPS is not set
|
||||
CONFIG_FAIR_GROUP_SCHED=y
|
||||
CONFIG_FAIR_USER_SCHED=y
|
||||
# CONFIG_FAIR_CGROUP_SCHED is not set
|
||||
CONFIG_SYSFS_DEPRECATED=y
|
||||
# CONFIG_RELAY is not set
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
|
|
@ -64,32 +63,24 @@ CONFIG_EPOLL=y
|
|||
CONFIG_SIGNALFD=y
|
||||
CONFIG_EVENTFD=y
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
|
||||
# CONFIG_NP2 is not set
|
||||
CONFIG_SLAB=y
|
||||
# CONFIG_SLUB is not set
|
||||
# CONFIG_SLOB is not set
|
||||
CONFIG_SLABINFO=y
|
||||
CONFIG_RT_MUTEXES=y
|
||||
CONFIG_TINY_SHMEM=y
|
||||
CONFIG_BASE_SMALL=0
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
CONFIG_KMOD=y
|
||||
|
||||
#
|
||||
# Block layer
|
||||
#
|
||||
CONFIG_BLOCK=y
|
||||
# CONFIG_LBD is not set
|
||||
# CONFIG_BLK_DEV_IO_TRACE is not set
|
||||
# CONFIG_LSF is not set
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
|
|
@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y
|
|||
# CONFIG_BF_REV_ANY is not set
|
||||
# CONFIG_BF_REV_NONE is not set
|
||||
CONFIG_BF53x=y
|
||||
CONFIG_BFIN_SINGLE_CORE=y
|
||||
CONFIG_MEM_MT48LC64M4A2FB_7E=y
|
||||
# CONFIG_BFIN533_EZKIT is not set
|
||||
CONFIG_BFIN533_STAMP=y
|
||||
# CONFIG_BFIN533_BLUETECHNIX_CM is not set
|
||||
# CONFIG_H8606_HVSISTEMAS is not set
|
||||
# CONFIG_BFIN532_IP0X is not set
|
||||
# CONFIG_GENERIC_BF533_BOARD is not set
|
||||
|
||||
#
|
||||
|
|
@ -189,12 +180,14 @@ CONFIG_WDTIMER=13
|
|||
# Board customizations
|
||||
#
|
||||
# CONFIG_CMDLINE_BOOL is not set
|
||||
CONFIG_BOOT_LOAD=0x1000
|
||||
|
||||
#
|
||||
# Clock/PLL Setup
|
||||
#
|
||||
CONFIG_CLKIN_HZ=11059200
|
||||
# CONFIG_BFIN_KERNEL_CLOCK is not set
|
||||
CONFIG_MAX_MEM_SIZE=512
|
||||
CONFIG_MAX_VCO_HZ=750000000
|
||||
CONFIG_MIN_VCO_HZ=50000000
|
||||
CONFIG_MAX_SCLK_HZ=133333333
|
||||
|
|
@ -208,14 +201,17 @@ CONFIG_HZ_250=y
|
|||
# CONFIG_HZ_300 is not set
|
||||
# CONFIG_HZ_1000 is not set
|
||||
CONFIG_HZ=250
|
||||
CONFIG_GENERIC_TIME=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
# CONFIG_CYCLES_CLOCKSOURCE is not set
|
||||
CONFIG_TICK_ONESHOT=y
|
||||
# CONFIG_NO_HZ is not set
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
|
||||
#
|
||||
# Memory Setup
|
||||
# Misc
|
||||
#
|
||||
CONFIG_MAX_MEM_SIZE=512
|
||||
CONFIG_MEM_ADD_WIDTH=11
|
||||
CONFIG_ENET_FLASH_PIN=0
|
||||
CONFIG_BOOT_LOAD=0x1000
|
||||
CONFIG_BFIN_SCRATCH_REG_RETN=y
|
||||
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
|
||||
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
|
||||
|
|
@ -251,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y
|
|||
CONFIG_FLATMEM=y
|
||||
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4
|
||||
# CONFIG_RESOURCES_64BIT is not set
|
||||
CONFIG_ZONE_DMA_FLAG=1
|
||||
CONFIG_LARGE_ALLOCS=y
|
||||
CONFIG_VIRT_TO_BUS=y
|
||||
# CONFIG_BFIN_GPTIMERS is not set
|
||||
CONFIG_BFIN_DMA_5XX=y
|
||||
# CONFIG_DMA_UNCACHED_4M is not set
|
||||
# CONFIG_DMA_UNCACHED_2M is not set
|
||||
CONFIG_DMA_UNCACHED_1M=y
|
||||
# CONFIG_DMA_UNCACHED_NONE is not set
|
||||
|
|
@ -294,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y
|
|||
CONFIG_BANK_0=0x7BB0
|
||||
CONFIG_BANK_1=0x7BB0
|
||||
CONFIG_BANK_2=0x7BB0
|
||||
CONFIG_BANK_3=0xAAC3
|
||||
CONFIG_BANK_3=0xAAC2
|
||||
|
||||
#
|
||||
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
|
||||
#
|
||||
# CONFIG_PCI is not set
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
|
|
@ -322,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y
|
|||
CONFIG_PM=y
|
||||
# CONFIG_PM_LEGACY is not set
|
||||
# CONFIG_PM_DEBUG is not set
|
||||
# CONFIG_PM_SYSFS_DEPRECATED is not set
|
||||
CONFIG_PM_SLEEP=y
|
||||
CONFIG_SUSPEND_UP_POSSIBLE=y
|
||||
CONFIG_SUSPEND=y
|
||||
CONFIG_PM_BFIN_SLEEP_DEEPER=y
|
||||
# CONFIG_PM_BFIN_SLEEP is not set
|
||||
# CONFIG_PM_WAKEUP_BY_GPIO is not set
|
||||
|
|
@ -368,6 +364,7 @@ CONFIG_SYN_COOKIES=y
|
|||
CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
||||
CONFIG_INET_XFRM_MODE_TUNNEL=y
|
||||
CONFIG_INET_XFRM_MODE_BEET=y
|
||||
# CONFIG_INET_LRO is not set
|
||||
CONFIG_INET_DIAG=y
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
|
|
@ -394,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
|
|||
# CONFIG_LAPB is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
|
||||
#
|
||||
|
|
@ -429,6 +422,9 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
|
|||
# SIR device drivers
|
||||
#
|
||||
CONFIG_IRTTY_SIR=m
|
||||
CONFIG_BFIN_SIR=m
|
||||
CONFIG_SIR_BFIN_DMA=y
|
||||
# CONFIG_SIR_BFIN_PIO is not set
|
||||
|
||||
#
|
||||
# Dongle support
|
||||
|
|
@ -458,6 +454,7 @@ CONFIG_IRTTY_SIR=m
|
|||
# CONFIG_MAC80211 is not set
|
||||
# CONFIG_IEEE80211 is not set
|
||||
# CONFIG_RFKILL is not set
|
||||
# CONFIG_NET_9P is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
|
|
@ -466,14 +463,11 @@ CONFIG_IRTTY_SIR=m
|
|||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
# CONFIG_SYS_HYPERVISOR is not set
|
||||
|
||||
#
|
||||
# Connector - unified userspace <-> kernelspace linker
|
||||
#
|
||||
# CONFIG_CONNECTOR is not set
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
|
|
@ -493,6 +487,7 @@ CONFIG_MTD_BLOCK=y
|
|||
# CONFIG_INFTL is not set
|
||||
# CONFIG_RFD_FTL is not set
|
||||
# CONFIG_SSFDC is not set
|
||||
# CONFIG_MTD_OOPS is not set
|
||||
|
||||
#
|
||||
# RAM/ROM/Flash chip drivers
|
||||
|
|
@ -524,11 +519,7 @@ CONFIG_MTD_ROM=m
|
|||
#
|
||||
CONFIG_MTD_COMPLEX_MAPPINGS=y
|
||||
# CONFIG_MTD_PHYSMAP is not set
|
||||
CONFIG_MTD_BF5xx=m
|
||||
CONFIG_BFIN_FLASH_BANK_0=0x7BB0
|
||||
CONFIG_BFIN_FLASH_BANK_1=0x7BB0
|
||||
CONFIG_BFIN_FLASH_BANK_2=0x7BB0
|
||||
CONFIG_BFIN_FLASH_BANK_3=0x7BB0
|
||||
CONFIG_MTD_BFIN_ASYNC=m
|
||||
# CONFIG_MTD_UCLINUX is not set
|
||||
# CONFIG_MTD_PLATRAM is not set
|
||||
|
||||
|
|
@ -555,20 +546,8 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
|
|||
# UBI - Unsorted block images
|
||||
#
|
||||
# CONFIG_MTD_UBI is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
# CONFIG_PNPACPI is not set
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
CONFIG_BLK_DEV=y
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
|
|
@ -578,10 +557,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
|
|||
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
CONFIG_MISC_DEVICES=y
|
||||
# CONFIG_EEPROM_93CX6 is not set
|
||||
# CONFIG_IDE is not set
|
||||
|
||||
#
|
||||
|
|
@ -589,32 +566,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|||
#
|
||||
# CONFIG_RAID_ATTRS is not set
|
||||
# CONFIG_SCSI is not set
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
# CONFIG_SCSI_NETLINK is not set
|
||||
# CONFIG_ATA is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Network device support
|
||||
#
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_MACVLAN is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
# CONFIG_VETH is not set
|
||||
# CONFIG_PHYLIB is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_SMC91X=y
|
||||
# CONFIG_SMSC911X is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
||||
# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
||||
# CONFIG_IBM_NEW_EMAC_TAH is not set
|
||||
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
||||
# CONFIG_B44 is not set
|
||||
CONFIG_NETDEV_1000=y
|
||||
# CONFIG_AX88180 is not set
|
||||
CONFIG_NETDEV_10000=y
|
||||
|
|
@ -631,15 +605,7 @@ CONFIG_NETDEV_10000=y
|
|||
# CONFIG_NETCONSOLE is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Telephony Support
|
||||
#
|
||||
# CONFIG_PHONE is not set
|
||||
|
||||
#
|
||||
|
|
@ -654,7 +620,6 @@ CONFIG_INPUT=y
|
|||
#
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
CONFIG_INPUT_EVDEV=m
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
|
|
@ -667,14 +632,8 @@ CONFIG_INPUT_EVDEV=m
|
|||
# CONFIG_INPUT_TABLET is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
CONFIG_INPUT_MISC=y
|
||||
# CONFIG_INPUT_ATI_REMOTE is not set
|
||||
# CONFIG_INPUT_ATI_REMOTE2 is not set
|
||||
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
|
||||
# CONFIG_INPUT_POWERMATE is not set
|
||||
# CONFIG_INPUT_YEALINK is not set
|
||||
# CONFIG_INPUT_UINPUT is not set
|
||||
CONFIG_TWI_KEYPAD=m
|
||||
CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
|
|
@ -687,15 +646,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
|
|||
#
|
||||
# CONFIG_AD9960 is not set
|
||||
# CONFIG_SPI_ADC_BF533 is not set
|
||||
# CONFIG_BF5xx_PFLAGS is not set
|
||||
# CONFIG_BF5xx_PPIFCD is not set
|
||||
# CONFIG_BFIN_SIMPLE_TIMER is not set
|
||||
# CONFIG_BF5xx_PPI is not set
|
||||
CONFIG_BFIN_SPORT=y
|
||||
# CONFIG_BFIN_TIMER_LATENCY is not set
|
||||
CONFIG_TWI_LCD=m
|
||||
CONFIG_TWI_LCD_SLAVE_ADDR=34
|
||||
# CONFIG_AD5304 is not set
|
||||
CONFIG_SIMPLE_GPIO=m
|
||||
# CONFIG_VT is not set
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
|
|
@ -723,28 +680,11 @@ CONFIG_UNIX98_PTYS=y
|
|||
# CAN, the car bus and industrial fieldbus
|
||||
#
|
||||
# CONFIG_CAN4LINUX is not set
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
# CONFIG_WATCHDOG_NOWAYOUT is not set
|
||||
|
||||
#
|
||||
# Watchdog Device Drivers
|
||||
#
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
CONFIG_BFIN_WDT=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
# CONFIG_GEN_RTC is not set
|
||||
CONFIG_BLACKFIN_DPMC=y
|
||||
# CONFIG_R3964 is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
# CONFIG_TCG_TPM is not set
|
||||
CONFIG_I2C=m
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
|
|
@ -764,6 +704,7 @@ CONFIG_I2C_ALGOBIT=m
|
|||
# CONFIG_I2C_OCORES is not set
|
||||
# CONFIG_I2C_PARPORT_LIGHT is not set
|
||||
# CONFIG_I2C_SIMTEC is not set
|
||||
# CONFIG_I2C_TAOS_EVM is not set
|
||||
# CONFIG_I2C_STUB is not set
|
||||
|
||||
#
|
||||
|
|
@ -771,14 +712,15 @@ CONFIG_I2C_ALGOBIT=m
|
|||
#
|
||||
# CONFIG_SENSORS_DS1337 is not set
|
||||
# CONFIG_SENSORS_DS1374 is not set
|
||||
# CONFIG_DS1682 is not set
|
||||
# CONFIG_SENSORS_AD5252 is not set
|
||||
# CONFIG_SENSORS_EEPROM is not set
|
||||
# CONFIG_SENSORS_PCF8574 is not set
|
||||
# CONFIG_SENSORS_PCF8575 is not set
|
||||
# CONFIG_SENSORS_PCA9543 is not set
|
||||
# CONFIG_SENSORS_PCA9539 is not set
|
||||
# CONFIG_SENSORS_PCF8591 is not set
|
||||
# CONFIG_SENSORS_MAX6875 is not set
|
||||
# CONFIG_SENSORS_TSL2550 is not set
|
||||
# CONFIG_I2C_DEBUG_CORE is not set
|
||||
# CONFIG_I2C_DEBUG_ALGO is not set
|
||||
# CONFIG_I2C_DEBUG_BUS is not set
|
||||
|
|
@ -801,14 +743,11 @@ CONFIG_SPI_BFIN=y
|
|||
#
|
||||
# CONFIG_SPI_AT25 is not set
|
||||
# CONFIG_SPI_SPIDEV is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_SPI_TLE62X0 is not set
|
||||
# CONFIG_W1 is not set
|
||||
# CONFIG_POWER_SUPPLY is not set
|
||||
CONFIG_HWMON=y
|
||||
# CONFIG_HWMON_VID is not set
|
||||
# CONFIG_SENSORS_ABITUGURU is not set
|
||||
# CONFIG_SENSORS_AD7418 is not set
|
||||
# CONFIG_SENSORS_ADM1021 is not set
|
||||
# CONFIG_SENSORS_ADM1025 is not set
|
||||
|
|
@ -816,12 +755,12 @@ CONFIG_HWMON=y
|
|||
# CONFIG_SENSORS_ADM1029 is not set
|
||||
# CONFIG_SENSORS_ADM1031 is not set
|
||||
# CONFIG_SENSORS_ADM9240 is not set
|
||||
# CONFIG_SENSORS_ASB100 is not set
|
||||
# CONFIG_SENSORS_ADT7470 is not set
|
||||
# CONFIG_SENSORS_ATXP1 is not set
|
||||
# CONFIG_SENSORS_DS1621 is not set
|
||||
# CONFIG_SENSORS_F71805F is not set
|
||||
# CONFIG_SENSORS_FSCHER is not set
|
||||
# CONFIG_SENSORS_FSCPOS is not set
|
||||
# CONFIG_SENSORS_F71882FG is not set
|
||||
# CONFIG_SENSORS_F75375S is not set
|
||||
# CONFIG_SENSORS_GL518SM is not set
|
||||
# CONFIG_SENSORS_GL520SM is not set
|
||||
# CONFIG_SENSORS_IT87 is not set
|
||||
|
|
@ -836,13 +775,16 @@ CONFIG_HWMON=y
|
|||
# CONFIG_SENSORS_LM87 is not set
|
||||
# CONFIG_SENSORS_LM90 is not set
|
||||
# CONFIG_SENSORS_LM92 is not set
|
||||
# CONFIG_SENSORS_LM93 is not set
|
||||
# CONFIG_SENSORS_MAX1619 is not set
|
||||
# CONFIG_SENSORS_MAX6650 is not set
|
||||
# CONFIG_SENSORS_PC87360 is not set
|
||||
# CONFIG_SENSORS_PC87427 is not set
|
||||
# CONFIG_SENSORS_DME1737 is not set
|
||||
# CONFIG_SENSORS_SMSC47M1 is not set
|
||||
# CONFIG_SENSORS_SMSC47M192 is not set
|
||||
# CONFIG_SENSORS_SMSC47B397 is not set
|
||||
# CONFIG_SENSORS_THMC50 is not set
|
||||
# CONFIG_SENSORS_VT1211 is not set
|
||||
# CONFIG_SENSORS_W83781D is not set
|
||||
# CONFIG_SENSORS_W83791D is not set
|
||||
|
|
@ -852,6 +794,20 @@ CONFIG_HWMON=y
|
|||
# CONFIG_SENSORS_W83627HF is not set
|
||||
# CONFIG_SENSORS_W83627EHF is not set
|
||||
# CONFIG_HWMON_DEBUG_CHIP is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
# CONFIG_WATCHDOG_NOWAYOUT is not set
|
||||
|
||||
#
|
||||
# Watchdog Device Drivers
|
||||
#
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
CONFIG_BFIN_WDT=y
|
||||
|
||||
#
|
||||
# Sonics Silicon Backplane
|
||||
#
|
||||
CONFIG_SSB_POSSIBLE=y
|
||||
# CONFIG_SSB is not set
|
||||
|
||||
#
|
||||
# Multifunction device drivers
|
||||
|
|
@ -863,24 +819,20 @@ CONFIG_HWMON=y
|
|||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
# CONFIG_DVB_CORE is not set
|
||||
CONFIG_DAB=y
|
||||
# CONFIG_DAB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||
|
||||
#
|
||||
# Display device support
|
||||
#
|
||||
# CONFIG_DISPLAY_SUPPORT is not set
|
||||
# CONFIG_VGASTATE is not set
|
||||
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
||||
CONFIG_FB=m
|
||||
CONFIG_FIRMWARE_EDID=y
|
||||
# CONFIG_FB_DDC is not set
|
||||
CONFIG_FB_CFB_FILLRECT=m
|
||||
CONFIG_FB_CFB_COPYAREA=m
|
||||
CONFIG_FB_CFB_IMAGEBLIT=m
|
||||
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
||||
# CONFIG_FB_SYS_FILLRECT is not set
|
||||
# CONFIG_FB_SYS_COPYAREA is not set
|
||||
# CONFIG_FB_SYS_IMAGEBLIT is not set
|
||||
|
|
@ -895,7 +847,7 @@ CONFIG_FB_DEFERRED_IO=y
|
|||
#
|
||||
# Frame buffer hardware drivers
|
||||
#
|
||||
CONFIG_FB_BFIN_7171=m
|
||||
# CONFIG_FB_BFIN_T350MCQB is not set
|
||||
CONFIG_FB_BFIN_7393=m
|
||||
CONFIG_NTSC=y
|
||||
# CONFIG_PAL is not set
|
||||
|
|
@ -905,9 +857,14 @@ CONFIG_NTSC=y
|
|||
# CONFIG_PAL_YCBCR is not set
|
||||
CONFIG_ADV7393_1XMEM=y
|
||||
# CONFIG_ADV7393_2XMEM is not set
|
||||
# CONFIG_FB_BFIN_T350MCQB is not set
|
||||
# CONFIG_FB_S1D13XXX is not set
|
||||
# CONFIG_FB_VIRTUAL is not set
|
||||
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||
|
||||
#
|
||||
# Display device support
|
||||
#
|
||||
# CONFIG_DISPLAY_SUPPORT is not set
|
||||
# CONFIG_LOGO is not set
|
||||
|
||||
#
|
||||
|
|
@ -940,6 +897,10 @@ CONFIG_SND_VERBOSE_PROCFS=y
|
|||
# CONFIG_SND_SERIAL_U16550 is not set
|
||||
# CONFIG_SND_MPU401 is not set
|
||||
|
||||
#
|
||||
# SPI devices
|
||||
#
|
||||
|
||||
#
|
||||
# ALSA Blackfin devices
|
||||
#
|
||||
|
|
@ -953,69 +914,43 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4
|
|||
CONFIG_SND_BFIN_AD73311=m
|
||||
CONFIG_SND_BFIN_SPORT=0
|
||||
CONFIG_SND_BFIN_AD73311_SE=4
|
||||
CONFIG_SND_BFIN_AD73322=m
|
||||
CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
|
||||
CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
|
||||
CONFIG_SND_BFIN_AD73322_RESET=12
|
||||
|
||||
#
|
||||
# System on Chip audio support
|
||||
#
|
||||
# CONFIG_SND_SOC is not set
|
||||
CONFIG_SND_SOC_AC97_BUS=y
|
||||
CONFIG_SND_SOC=m
|
||||
CONFIG_SND_BF5XX_SOC=m
|
||||
CONFIG_SND_MMAP_SUPPORT=y
|
||||
CONFIG_SND_BF5XX_SOC_AC97=m
|
||||
# CONFIG_SND_BF5XX_SOC_WM8750 is not set
|
||||
# CONFIG_SND_BF5XX_SOC_WM8731 is not set
|
||||
# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
|
||||
CONFIG_SND_BF5XX_SOC_BF5xx=m
|
||||
CONFIG_SND_BF5XX_SPORT_NUM=0
|
||||
# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
|
||||
|
||||
#
|
||||
# SoC Audio support for SuperH
|
||||
#
|
||||
CONFIG_SND_SOC_AD1980=m
|
||||
|
||||
#
|
||||
# Open Sound System
|
||||
#
|
||||
# CONFIG_SOUND_PRIME is not set
|
||||
|
||||
#
|
||||
# HID Devices
|
||||
#
|
||||
CONFIG_AC97_BUS=m
|
||||
CONFIG_HID_SUPPORT=y
|
||||
CONFIG_HID=y
|
||||
# CONFIG_HID_DEBUG is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
# CONFIG_USB is not set
|
||||
|
||||
#
|
||||
# Enable Host or Gadget support to see Inventra options
|
||||
#
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
# CONFIG_HIDRAW is not set
|
||||
# CONFIG_USB_SUPPORT is not set
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# LED devices
|
||||
#
|
||||
# CONFIG_NEW_LEDS is not set
|
||||
|
||||
#
|
||||
# LED drivers
|
||||
#
|
||||
|
||||
#
|
||||
# LED Triggers
|
||||
#
|
||||
|
||||
#
|
||||
# InfiniBand support
|
||||
#
|
||||
|
||||
#
|
||||
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
|
||||
#
|
||||
|
||||
#
|
||||
# Real Time Clock
|
||||
#
|
||||
CONFIG_RTC_LIB=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_HCTOSYS=y
|
||||
|
|
@ -1035,6 +970,7 @@ CONFIG_RTC_INTF_DEV=y
|
|||
# I2C RTC drivers
|
||||
#
|
||||
# CONFIG_RTC_DRV_DS1307 is not set
|
||||
# CONFIG_RTC_DRV_DS1374 is not set
|
||||
# CONFIG_RTC_DRV_DS1672 is not set
|
||||
# CONFIG_RTC_DRV_MAX6900 is not set
|
||||
# CONFIG_RTC_DRV_RS5C372 is not set
|
||||
|
|
@ -1042,6 +978,7 @@ CONFIG_RTC_INTF_DEV=y
|
|||
# CONFIG_RTC_DRV_X1205 is not set
|
||||
# CONFIG_RTC_DRV_PCF8563 is not set
|
||||
# CONFIG_RTC_DRV_PCF8583 is not set
|
||||
# CONFIG_RTC_DRV_M41T80 is not set
|
||||
|
||||
#
|
||||
# SPI RTC drivers
|
||||
|
|
@ -1053,8 +990,10 @@ CONFIG_RTC_INTF_DEV=y
|
|||
# Platform RTC drivers
|
||||
#
|
||||
# CONFIG_RTC_DRV_DS1553 is not set
|
||||
# CONFIG_RTC_DRV_STK17TA8 is not set
|
||||
# CONFIG_RTC_DRV_DS1742 is not set
|
||||
# CONFIG_RTC_DRV_M48T86 is not set
|
||||
# CONFIG_RTC_DRV_M48T59 is not set
|
||||
# CONFIG_RTC_DRV_V3020 is not set
|
||||
|
||||
#
|
||||
|
|
@ -1063,22 +1002,9 @@ CONFIG_RTC_INTF_DEV=y
|
|||
CONFIG_RTC_DRV_BFIN=y
|
||||
|
||||
#
|
||||
# DMA Engine support
|
||||
# Userspace I/O
|
||||
#
|
||||
# CONFIG_DMA_ENGINE is not set
|
||||
|
||||
#
|
||||
# DMA Clients
|
||||
#
|
||||
|
||||
#
|
||||
# DMA Devices
|
||||
#
|
||||
|
||||
#
|
||||
# PBX support
|
||||
#
|
||||
# CONFIG_PBX is not set
|
||||
# CONFIG_UIO is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
|
|
@ -1123,7 +1049,6 @@ CONFIG_PROC_SYSCTL=y
|
|||
CONFIG_SYSFS=y
|
||||
# CONFIG_TMPFS is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
# CONFIG_CONFIGFS_FS is not set
|
||||
|
||||
#
|
||||
|
|
@ -1149,10 +1074,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|||
CONFIG_JFFS2_FS=m
|
||||
CONFIG_JFFS2_FS_DEBUG=0
|
||||
CONFIG_JFFS2_FS_WRITEBUFFER=y
|
||||
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
|
||||
# CONFIG_JFFS2_SUMMARY is not set
|
||||
# CONFIG_JFFS2_FS_XATTR is not set
|
||||
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
||||
CONFIG_JFFS2_ZLIB=y
|
||||
# CONFIG_JFFS2_LZO is not set
|
||||
CONFIG_JFFS2_RTIME=y
|
||||
# CONFIG_JFFS2_RUBIN is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
|
|
@ -1161,10 +1088,7 @@ CONFIG_JFFS2_RTIME=y
|
|||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NETWORK_FILESYSTEMS=y
|
||||
CONFIG_NFS_FS=m
|
||||
CONFIG_NFS_V3=y
|
||||
# CONFIG_NFS_V3_ACL is not set
|
||||
|
|
@ -1184,17 +1108,12 @@ CONFIG_SMB_FS=m
|
|||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
# CONFIG_9P_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
CONFIG_NLS=m
|
||||
CONFIG_NLS_DEFAULT="iso8859-1"
|
||||
# CONFIG_NLS_CODEPAGE_437 is not set
|
||||
|
|
@ -1235,21 +1154,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
|
|||
# CONFIG_NLS_KOI8_R is not set
|
||||
# CONFIG_NLS_KOI8_U is not set
|
||||
# CONFIG_NLS_UTF8 is not set
|
||||
|
||||
#
|
||||
# Distributed Lock Manager
|
||||
#
|
||||
# CONFIG_DLM is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
CONFIG_INSTRUMENTATION=y
|
||||
# CONFIG_PROFILING is not set
|
||||
# CONFIG_MARKERS is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_ENABLE_WARN_DEPRECATED=y
|
||||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
|
|
@ -1257,6 +1171,7 @@ CONFIG_DEBUG_FS=y
|
|||
# CONFIG_HEADERS_CHECK is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_SAMPLES is not set
|
||||
CONFIG_DEBUG_MMRS=y
|
||||
CONFIG_DEBUG_HUNT_FOR_ZERO=y
|
||||
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
|
||||
|
|
@ -1276,11 +1191,7 @@ CONFIG_ACCESS_CHECK=y
|
|||
# CONFIG_KEYS is not set
|
||||
CONFIG_SECURITY=y
|
||||
# CONFIG_SECURITY_NETWORK is not set
|
||||
CONFIG_SECURITY_CAPABILITIES=m
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_SECURITY_CAPABILITIES is not set
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
|
|
@ -1291,6 +1202,7 @@ CONFIG_CRC_CCITT=m
|
|||
# CONFIG_CRC16 is not set
|
||||
# CONFIG_CRC_ITU_T is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_CRC7 is not set
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZLIB_DEFLATE=m
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.22.16
|
||||
# Linux kernel version: 2.6.24.7
|
||||
#
|
||||
# CONFIG_MMU is not set
|
||||
# CONFIG_FPU is not set
|
||||
|
|
@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|||
CONFIG_GENERIC_HWEIGHT=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
CONFIG_GENERIC_IRQ_PROBE=y
|
||||
CONFIG_GENERIC_TIME=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_FORCE_MAX_ZONEORDER=14
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
# General setup
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
CONFIG_LOCALVERSION_AUTO=y
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_IPC_NS is not set
|
||||
CONFIG_SYSVIPC_SYSCTL=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
# CONFIG_TASKSTATS is not set
|
||||
# CONFIG_UTS_NS is not set
|
||||
# CONFIG_USER_NS is not set
|
||||
# CONFIG_PID_NS is not set
|
||||
# CONFIG_AUDIT is not set
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
# CONFIG_CGROUPS is not set
|
||||
CONFIG_FAIR_GROUP_SCHED=y
|
||||
CONFIG_FAIR_USER_SCHED=y
|
||||
# CONFIG_FAIR_CGROUP_SCHED is not set
|
||||
CONFIG_SYSFS_DEPRECATED=y
|
||||
# CONFIG_RELAY is not set
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
|
|
@ -64,32 +63,24 @@ CONFIG_EPOLL=y
|
|||
CONFIG_SIGNALFD=y
|
||||
CONFIG_EVENTFD=y
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
|
||||
# CONFIG_NP2 is not set
|
||||
CONFIG_SLAB=y
|
||||
# CONFIG_SLUB is not set
|
||||
# CONFIG_SLOB is not set
|
||||
CONFIG_SLABINFO=y
|
||||
CONFIG_RT_MUTEXES=y
|
||||
CONFIG_TINY_SHMEM=y
|
||||
CONFIG_BASE_SMALL=0
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
CONFIG_KMOD=y
|
||||
|
||||
#
|
||||
# Block layer
|
||||
#
|
||||
CONFIG_BLOCK=y
|
||||
# CONFIG_LBD is not set
|
||||
# CONFIG_BLK_DEV_IO_TRACE is not set
|
||||
# CONFIG_LSF is not set
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
|
|
@ -141,7 +132,6 @@ CONFIG_BF_REV_0_2=y
|
|||
# CONFIG_BF_REV_ANY is not set
|
||||
# CONFIG_BF_REV_NONE is not set
|
||||
CONFIG_BF53x=y
|
||||
CONFIG_BFIN_SINGLE_CORE=y
|
||||
CONFIG_MEM_MT48LC32M8A2_75=y
|
||||
CONFIG_IRQ_PLL_WAKEUP=7
|
||||
CONFIG_IRQ_RTC=8
|
||||
|
|
@ -197,12 +187,14 @@ CONFIG_IRQ_PROG_INTA=12
|
|||
# Board customizations
|
||||
#
|
||||
# CONFIG_CMDLINE_BOOL is not set
|
||||
CONFIG_BOOT_LOAD=0x1000
|
||||
|
||||
#
|
||||
# Clock/PLL Setup
|
||||
#
|
||||
CONFIG_CLKIN_HZ=25000000
|
||||
# CONFIG_BFIN_KERNEL_CLOCK is not set
|
||||
CONFIG_MAX_MEM_SIZE=512
|
||||
CONFIG_MAX_VCO_HZ=600000000
|
||||
CONFIG_MIN_VCO_HZ=50000000
|
||||
CONFIG_MAX_SCLK_HZ=133333333
|
||||
|
|
@ -216,13 +208,17 @@ CONFIG_HZ_250=y
|
|||
# CONFIG_HZ_300 is not set
|
||||
# CONFIG_HZ_1000 is not set
|
||||
CONFIG_HZ=250
|
||||
CONFIG_GENERIC_TIME=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
# CONFIG_CYCLES_CLOCKSOURCE is not set
|
||||
CONFIG_TICK_ONESHOT=y
|
||||
# CONFIG_NO_HZ is not set
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
|
||||
#
|
||||
# Memory Setup
|
||||
# Misc
|
||||
#
|
||||
CONFIG_MAX_MEM_SIZE=512
|
||||
CONFIG_MEM_ADD_WIDTH=10
|
||||
CONFIG_BOOT_LOAD=0x1000
|
||||
CONFIG_BFIN_SCRATCH_REG_RETN=y
|
||||
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
|
||||
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
|
||||
|
|
@ -258,12 +254,14 @@ CONFIG_FLATMEM_MANUAL=y
|
|||
CONFIG_FLATMEM=y
|
||||
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4
|
||||
# CONFIG_RESOURCES_64BIT is not set
|
||||
CONFIG_ZONE_DMA_FLAG=1
|
||||
CONFIG_LARGE_ALLOCS=y
|
||||
CONFIG_VIRT_TO_BUS=y
|
||||
# CONFIG_BFIN_GPTIMERS is not set
|
||||
CONFIG_BFIN_DMA_5XX=y
|
||||
# CONFIG_DMA_UNCACHED_4M is not set
|
||||
# CONFIG_DMA_UNCACHED_2M is not set
|
||||
CONFIG_DMA_UNCACHED_1M=y
|
||||
# CONFIG_DMA_UNCACHED_NONE is not set
|
||||
|
|
@ -301,17 +299,13 @@ CONFIG_C_AMBEN_ALL=y
|
|||
CONFIG_BANK_0=0x7BB0
|
||||
CONFIG_BANK_1=0x7BB0
|
||||
CONFIG_BANK_2=0x7BB0
|
||||
CONFIG_BANK_3=0x99B3
|
||||
CONFIG_BANK_3=0x99B2
|
||||
|
||||
#
|
||||
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
|
||||
#
|
||||
# CONFIG_PCI is not set
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
|
|
@ -329,7 +323,9 @@ CONFIG_BINFMT_ZFLAT=y
|
|||
CONFIG_PM=y
|
||||
# CONFIG_PM_LEGACY is not set
|
||||
# CONFIG_PM_DEBUG is not set
|
||||
# CONFIG_PM_SYSFS_DEPRECATED is not set
|
||||
CONFIG_PM_SLEEP=y
|
||||
CONFIG_SUSPEND_UP_POSSIBLE=y
|
||||
CONFIG_SUSPEND=y
|
||||
CONFIG_PM_BFIN_SLEEP_DEEPER=y
|
||||
# CONFIG_PM_BFIN_SLEEP is not set
|
||||
# CONFIG_PM_WAKEUP_BY_GPIO is not set
|
||||
|
|
@ -375,6 +371,7 @@ CONFIG_SYN_COOKIES=y
|
|||
CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
||||
CONFIG_INET_XFRM_MODE_TUNNEL=y
|
||||
CONFIG_INET_XFRM_MODE_BEET=y
|
||||
# CONFIG_INET_LRO is not set
|
||||
CONFIG_INET_DIAG=y
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
|
|
@ -401,10 +398,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
|
|||
# CONFIG_LAPB is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
|
||||
#
|
||||
|
|
@ -436,6 +429,10 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
|
|||
# SIR device drivers
|
||||
#
|
||||
CONFIG_IRTTY_SIR=m
|
||||
CONFIG_BFIN_SIR=m
|
||||
CONFIG_BFIN_SIR1=y
|
||||
CONFIG_SIR_BFIN_DMA=y
|
||||
# CONFIG_SIR_BFIN_PIO is not set
|
||||
|
||||
#
|
||||
# Dongle support
|
||||
|
|
@ -465,6 +462,7 @@ CONFIG_IRTTY_SIR=m
|
|||
# CONFIG_MAC80211 is not set
|
||||
# CONFIG_IEEE80211 is not set
|
||||
# CONFIG_RFKILL is not set
|
||||
# CONFIG_NET_9P is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
|
|
@ -473,14 +471,11 @@ CONFIG_IRTTY_SIR=m
|
|||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
# CONFIG_SYS_HYPERVISOR is not set
|
||||
|
||||
#
|
||||
# Connector - unified userspace <-> kernelspace linker
|
||||
#
|
||||
# CONFIG_CONNECTOR is not set
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
|
|
@ -500,6 +495,7 @@ CONFIG_MTD_BLOCK=y
|
|||
# CONFIG_INFTL is not set
|
||||
# CONFIG_RFD_FTL is not set
|
||||
# CONFIG_SSFDC is not set
|
||||
# CONFIG_MTD_OOPS is not set
|
||||
|
||||
#
|
||||
# RAM/ROM/Flash chip drivers
|
||||
|
|
@ -572,20 +568,8 @@ CONFIG_MTD_NAND_IDS=m
|
|||
# UBI - Unsorted block images
|
||||
#
|
||||
# CONFIG_MTD_UBI is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
# CONFIG_PNPACPI is not set
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
CONFIG_BLK_DEV=y
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
|
|
@ -595,10 +579,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
|
|||
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
CONFIG_MISC_DEVICES=y
|
||||
# CONFIG_EEPROM_93CX6 is not set
|
||||
# CONFIG_IDE is not set
|
||||
|
||||
#
|
||||
|
|
@ -606,22 +588,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|||
#
|
||||
# CONFIG_RAID_ATTRS is not set
|
||||
# CONFIG_SCSI is not set
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
# CONFIG_SCSI_NETLINK is not set
|
||||
# CONFIG_ATA is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Network device support
|
||||
#
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_MACVLAN is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
# CONFIG_VETH is not set
|
||||
CONFIG_PHYLIB=y
|
||||
|
||||
#
|
||||
|
|
@ -635,21 +613,24 @@ CONFIG_PHYLIB=y
|
|||
# CONFIG_VITESSE_PHY is not set
|
||||
CONFIG_SMSC_PHY=y
|
||||
# CONFIG_BROADCOM_PHY is not set
|
||||
# CONFIG_ICPLUS_PHY is not set
|
||||
# CONFIG_FIXED_PHY is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
# CONFIG_MDIO_BITBANG is not set
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
# CONFIG_SMC91X is not set
|
||||
CONFIG_BFIN_MAC=y
|
||||
CONFIG_BFIN_MAC_USE_L1=y
|
||||
CONFIG_BFIN_TX_DESC_NUM=10
|
||||
CONFIG_BFIN_RX_DESC_NUM=20
|
||||
# CONFIG_BFIN_MAC_RMII is not set
|
||||
# CONFIG_SMC91X is not set
|
||||
# CONFIG_SMSC911X is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
||||
# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
||||
# CONFIG_IBM_NEW_EMAC_TAH is not set
|
||||
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
||||
# CONFIG_B44 is not set
|
||||
CONFIG_NETDEV_1000=y
|
||||
# CONFIG_AX88180 is not set
|
||||
CONFIG_NETDEV_10000=y
|
||||
|
|
@ -666,15 +647,7 @@ CONFIG_NETDEV_10000=y
|
|||
# CONFIG_NETCONSOLE is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Telephony Support
|
||||
#
|
||||
# CONFIG_PHONE is not set
|
||||
|
||||
#
|
||||
|
|
@ -689,7 +662,6 @@ CONFIG_INPUT=y
|
|||
#
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
CONFIG_INPUT_EVDEV=m
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
|
|
@ -702,14 +674,8 @@ CONFIG_INPUT_EVDEV=m
|
|||
# CONFIG_INPUT_TABLET is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
CONFIG_INPUT_MISC=y
|
||||
# CONFIG_INPUT_ATI_REMOTE is not set
|
||||
# CONFIG_INPUT_ATI_REMOTE2 is not set
|
||||
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
|
||||
# CONFIG_INPUT_POWERMATE is not set
|
||||
# CONFIG_INPUT_YEALINK is not set
|
||||
# CONFIG_INPUT_UINPUT is not set
|
||||
CONFIG_TWI_KEYPAD=m
|
||||
CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
|
|
@ -722,15 +688,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
|
|||
#
|
||||
# CONFIG_AD9960 is not set
|
||||
# CONFIG_SPI_ADC_BF533 is not set
|
||||
# CONFIG_BF5xx_PFLAGS is not set
|
||||
# CONFIG_BF5xx_PPIFCD is not set
|
||||
# CONFIG_BFIN_SIMPLE_TIMER is not set
|
||||
# CONFIG_BF5xx_PPI is not set
|
||||
CONFIG_BFIN_SPORT=y
|
||||
# CONFIG_BFIN_TIMER_LATENCY is not set
|
||||
CONFIG_TWI_LCD=m
|
||||
CONFIG_TWI_LCD_SLAVE_ADDR=34
|
||||
# CONFIG_AD5304 is not set
|
||||
CONFIG_SIMPLE_GPIO=m
|
||||
# CONFIG_VT is not set
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
|
|
@ -766,28 +730,11 @@ CONFIG_CAN4LINUX=y
|
|||
# CONFIG_CAN_MCF5282 is not set
|
||||
# CONFIG_CAN_UNCTWINCAN is not set
|
||||
CONFIG_CAN_BLACKFIN=m
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
# CONFIG_WATCHDOG_NOWAYOUT is not set
|
||||
|
||||
#
|
||||
# Watchdog Device Drivers
|
||||
#
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
CONFIG_BFIN_WDT=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
# CONFIG_GEN_RTC is not set
|
||||
CONFIG_BLACKFIN_DPMC=y
|
||||
# CONFIG_R3964 is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
# CONFIG_TCG_TPM is not set
|
||||
CONFIG_I2C=m
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
|
|
@ -809,6 +756,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
|
|||
# CONFIG_I2C_OCORES is not set
|
||||
# CONFIG_I2C_PARPORT_LIGHT is not set
|
||||
# CONFIG_I2C_SIMTEC is not set
|
||||
# CONFIG_I2C_TAOS_EVM is not set
|
||||
# CONFIG_I2C_STUB is not set
|
||||
|
||||
#
|
||||
|
|
@ -816,14 +764,15 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
|
|||
#
|
||||
# CONFIG_SENSORS_DS1337 is not set
|
||||
# CONFIG_SENSORS_DS1374 is not set
|
||||
# CONFIG_DS1682 is not set
|
||||
CONFIG_SENSORS_AD5252=m
|
||||
# CONFIG_SENSORS_EEPROM is not set
|
||||
# CONFIG_SENSORS_PCF8574 is not set
|
||||
# CONFIG_SENSORS_PCF8575 is not set
|
||||
# CONFIG_SENSORS_PCA9543 is not set
|
||||
# CONFIG_SENSORS_PCA9539 is not set
|
||||
# CONFIG_SENSORS_PCF8591 is not set
|
||||
# CONFIG_SENSORS_MAX6875 is not set
|
||||
# CONFIG_SENSORS_TSL2550 is not set
|
||||
# CONFIG_I2C_DEBUG_CORE is not set
|
||||
# CONFIG_I2C_DEBUG_ALGO is not set
|
||||
# CONFIG_I2C_DEBUG_BUS is not set
|
||||
|
|
@ -846,14 +795,11 @@ CONFIG_SPI_BFIN=y
|
|||
#
|
||||
# CONFIG_SPI_AT25 is not set
|
||||
# CONFIG_SPI_SPIDEV is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_SPI_TLE62X0 is not set
|
||||
# CONFIG_W1 is not set
|
||||
# CONFIG_POWER_SUPPLY is not set
|
||||
CONFIG_HWMON=y
|
||||
# CONFIG_HWMON_VID is not set
|
||||
# CONFIG_SENSORS_ABITUGURU is not set
|
||||
# CONFIG_SENSORS_AD7418 is not set
|
||||
# CONFIG_SENSORS_ADM1021 is not set
|
||||
# CONFIG_SENSORS_ADM1025 is not set
|
||||
|
|
@ -861,12 +807,12 @@ CONFIG_HWMON=y
|
|||
# CONFIG_SENSORS_ADM1029 is not set
|
||||
# CONFIG_SENSORS_ADM1031 is not set
|
||||
# CONFIG_SENSORS_ADM9240 is not set
|
||||
# CONFIG_SENSORS_ASB100 is not set
|
||||
# CONFIG_SENSORS_ADT7470 is not set
|
||||
# CONFIG_SENSORS_ATXP1 is not set
|
||||
# CONFIG_SENSORS_DS1621 is not set
|
||||
# CONFIG_SENSORS_F71805F is not set
|
||||
# CONFIG_SENSORS_FSCHER is not set
|
||||
# CONFIG_SENSORS_FSCPOS is not set
|
||||
# CONFIG_SENSORS_F71882FG is not set
|
||||
# CONFIG_SENSORS_F75375S is not set
|
||||
# CONFIG_SENSORS_GL518SM is not set
|
||||
# CONFIG_SENSORS_GL520SM is not set
|
||||
# CONFIG_SENSORS_IT87 is not set
|
||||
|
|
@ -881,13 +827,16 @@ CONFIG_HWMON=y
|
|||
# CONFIG_SENSORS_LM87 is not set
|
||||
# CONFIG_SENSORS_LM90 is not set
|
||||
# CONFIG_SENSORS_LM92 is not set
|
||||
# CONFIG_SENSORS_LM93 is not set
|
||||
# CONFIG_SENSORS_MAX1619 is not set
|
||||
# CONFIG_SENSORS_MAX6650 is not set
|
||||
# CONFIG_SENSORS_PC87360 is not set
|
||||
# CONFIG_SENSORS_PC87427 is not set
|
||||
# CONFIG_SENSORS_DME1737 is not set
|
||||
# CONFIG_SENSORS_SMSC47M1 is not set
|
||||
# CONFIG_SENSORS_SMSC47M192 is not set
|
||||
# CONFIG_SENSORS_SMSC47B397 is not set
|
||||
# CONFIG_SENSORS_THMC50 is not set
|
||||
# CONFIG_SENSORS_VT1211 is not set
|
||||
# CONFIG_SENSORS_W83781D is not set
|
||||
# CONFIG_SENSORS_W83791D is not set
|
||||
|
|
@ -897,6 +846,20 @@ CONFIG_HWMON=y
|
|||
# CONFIG_SENSORS_W83627HF is not set
|
||||
# CONFIG_SENSORS_W83627EHF is not set
|
||||
# CONFIG_HWMON_DEBUG_CHIP is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
# CONFIG_WATCHDOG_NOWAYOUT is not set
|
||||
|
||||
#
|
||||
# Watchdog Device Drivers
|
||||
#
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
CONFIG_BFIN_WDT=y
|
||||
|
||||
#
|
||||
# Sonics Silicon Backplane
|
||||
#
|
||||
CONFIG_SSB_POSSIBLE=y
|
||||
# CONFIG_SSB is not set
|
||||
|
||||
#
|
||||
# Multifunction device drivers
|
||||
|
|
@ -913,21 +876,15 @@ CONFIG_DAB=y
|
|||
#
|
||||
# Graphics support
|
||||
#
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=m
|
||||
CONFIG_LCD_CLASS_DEVICE=m
|
||||
|
||||
#
|
||||
# Display device support
|
||||
#
|
||||
# CONFIG_DISPLAY_SUPPORT is not set
|
||||
# CONFIG_VGASTATE is not set
|
||||
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
||||
CONFIG_FB=m
|
||||
CONFIG_FIRMWARE_EDID=y
|
||||
# CONFIG_FB_DDC is not set
|
||||
CONFIG_FB_CFB_FILLRECT=m
|
||||
CONFIG_FB_CFB_COPYAREA=m
|
||||
CONFIG_FB_CFB_IMAGEBLIT=m
|
||||
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
||||
# CONFIG_FB_SYS_FILLRECT is not set
|
||||
# CONFIG_FB_SYS_COPYAREA is not set
|
||||
# CONFIG_FB_SYS_IMAGEBLIT is not set
|
||||
|
|
@ -942,7 +899,8 @@ CONFIG_FB_DEFERRED_IO=y
|
|||
#
|
||||
# Frame buffer hardware drivers
|
||||
#
|
||||
CONFIG_FB_BFIN_7171=m
|
||||
# CONFIG_FB_HITACHI_TX09 is not set
|
||||
# CONFIG_FB_BFIN_T350MCQB is not set
|
||||
CONFIG_FB_BFIN_7393=m
|
||||
CONFIG_NTSC=y
|
||||
# CONFIG_PAL is not set
|
||||
|
|
@ -956,10 +914,18 @@ CONFIG_FB_BF537_LQ035=m
|
|||
CONFIG_LQ035_SLAVE_ADDR=0x58
|
||||
# CONFIG_FB_BFIN_LANDSCAPE is not set
|
||||
# CONFIG_FB_BFIN_BGR is not set
|
||||
# CONFIG_FB_BFIN_T350MCQB is not set
|
||||
# CONFIG_FB_HITACHI_TX09 is not set
|
||||
# CONFIG_FB_S1D13XXX is not set
|
||||
# CONFIG_FB_VIRTUAL is not set
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_LCD_CLASS_DEVICE=m
|
||||
# CONFIG_LCD_LTV350QV is not set
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=m
|
||||
CONFIG_BACKLIGHT_CORGI=m
|
||||
|
||||
#
|
||||
# Display device support
|
||||
#
|
||||
# CONFIG_DISPLAY_SUPPORT is not set
|
||||
# CONFIG_LOGO is not set
|
||||
|
||||
#
|
||||
|
|
@ -992,6 +958,10 @@ CONFIG_SND_VERBOSE_PROCFS=y
|
|||
# CONFIG_SND_SERIAL_U16550 is not set
|
||||
# CONFIG_SND_MPU401 is not set
|
||||
|
||||
#
|
||||
# SPI devices
|
||||
#
|
||||
|
||||
#
|
||||
# ALSA Blackfin devices
|
||||
#
|
||||
|
|
@ -1005,6 +975,10 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4
|
|||
CONFIG_SND_BFIN_AD73311=m
|
||||
CONFIG_SND_BFIN_SPORT=0
|
||||
CONFIG_SND_BFIN_AD73311_SE=4
|
||||
CONFIG_SND_BFIN_AD73322=m
|
||||
CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
|
||||
CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
|
||||
CONFIG_SND_BFIN_AD73322_RESET=12
|
||||
|
||||
#
|
||||
# System on Chip audio support
|
||||
|
|
@ -1016,9 +990,14 @@ CONFIG_SND_MMAP_SUPPORT=y
|
|||
CONFIG_SND_BF5XX_SOC_AC97=m
|
||||
# CONFIG_SND_BF5XX_SOC_WM8750 is not set
|
||||
# CONFIG_SND_BF5XX_SOC_WM8731 is not set
|
||||
# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
|
||||
CONFIG_SND_BF5XX_SOC_BF5xx=m
|
||||
CONFIG_SND_BF5XX_SPORT_NUM=0
|
||||
# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
|
||||
|
||||
#
|
||||
# SoC Audio support for SuperH
|
||||
#
|
||||
CONFIG_SND_SOC_AD1980=m
|
||||
|
||||
#
|
||||
|
|
@ -1026,59 +1005,18 @@ CONFIG_SND_SOC_AD1980=m
|
|||
#
|
||||
# CONFIG_SOUND_PRIME is not set
|
||||
CONFIG_AC97_BUS=m
|
||||
|
||||
#
|
||||
# HID Devices
|
||||
#
|
||||
CONFIG_HID_SUPPORT=y
|
||||
CONFIG_HID=y
|
||||
# CONFIG_HID_DEBUG is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
# CONFIG_USB is not set
|
||||
|
||||
#
|
||||
# Enable Host or Gadget support to see Inventra options
|
||||
#
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
# CONFIG_HIDRAW is not set
|
||||
# CONFIG_USB_SUPPORT is not set
|
||||
# CONFIG_NO_DUMMY_DELAY is not set
|
||||
# CONFIG_DUMMY_DELAY_BANK0 is not set
|
||||
# CONFIG_DUMMY_DELAY_BANK1 is not set
|
||||
# CONFIG_DUMMY_DELAY_BANK2 is not set
|
||||
# CONFIG_DUMMY_DELAY_BANK3 is not set
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# LED devices
|
||||
#
|
||||
# CONFIG_NEW_LEDS is not set
|
||||
|
||||
#
|
||||
# LED drivers
|
||||
#
|
||||
|
||||
#
|
||||
# LED Triggers
|
||||
#
|
||||
|
||||
#
|
||||
# InfiniBand support
|
||||
#
|
||||
|
||||
#
|
||||
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
|
||||
#
|
||||
|
||||
#
|
||||
# Real Time Clock
|
||||
#
|
||||
CONFIG_RTC_LIB=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_HCTOSYS=y
|
||||
|
|
@ -1098,6 +1036,7 @@ CONFIG_RTC_INTF_DEV=y
|
|||
# I2C RTC drivers
|
||||
#
|
||||
# CONFIG_RTC_DRV_DS1307 is not set
|
||||
# CONFIG_RTC_DRV_DS1374 is not set
|
||||
# CONFIG_RTC_DRV_DS1672 is not set
|
||||
# CONFIG_RTC_DRV_MAX6900 is not set
|
||||
# CONFIG_RTC_DRV_RS5C372 is not set
|
||||
|
|
@ -1105,6 +1044,7 @@ CONFIG_RTC_INTF_DEV=y
|
|||
# CONFIG_RTC_DRV_X1205 is not set
|
||||
# CONFIG_RTC_DRV_PCF8563 is not set
|
||||
# CONFIG_RTC_DRV_PCF8583 is not set
|
||||
# CONFIG_RTC_DRV_M41T80 is not set
|
||||
|
||||
#
|
||||
# SPI RTC drivers
|
||||
|
|
@ -1116,8 +1056,10 @@ CONFIG_RTC_INTF_DEV=y
|
|||
# Platform RTC drivers
|
||||
#
|
||||
# CONFIG_RTC_DRV_DS1553 is not set
|
||||
# CONFIG_RTC_DRV_STK17TA8 is not set
|
||||
# CONFIG_RTC_DRV_DS1742 is not set
|
||||
# CONFIG_RTC_DRV_M48T86 is not set
|
||||
# CONFIG_RTC_DRV_M48T59 is not set
|
||||
# CONFIG_RTC_DRV_V3020 is not set
|
||||
|
||||
#
|
||||
|
|
@ -1126,22 +1068,9 @@ CONFIG_RTC_INTF_DEV=y
|
|||
CONFIG_RTC_DRV_BFIN=y
|
||||
|
||||
#
|
||||
# DMA Engine support
|
||||
# Userspace I/O
|
||||
#
|
||||
# CONFIG_DMA_ENGINE is not set
|
||||
|
||||
#
|
||||
# DMA Clients
|
||||
#
|
||||
|
||||
#
|
||||
# DMA Devices
|
||||
#
|
||||
|
||||
#
|
||||
# PBX support
|
||||
#
|
||||
# CONFIG_PBX is not set
|
||||
# CONFIG_UIO is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
|
|
@ -1186,7 +1115,6 @@ CONFIG_PROC_SYSCTL=y
|
|||
CONFIG_SYSFS=y
|
||||
# CONFIG_TMPFS is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
# CONFIG_CONFIGFS_FS is not set
|
||||
|
||||
#
|
||||
|
|
@ -1212,10 +1140,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|||
CONFIG_JFFS2_FS=m
|
||||
CONFIG_JFFS2_FS_DEBUG=0
|
||||
CONFIG_JFFS2_FS_WRITEBUFFER=y
|
||||
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
|
||||
# CONFIG_JFFS2_SUMMARY is not set
|
||||
# CONFIG_JFFS2_FS_XATTR is not set
|
||||
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
||||
CONFIG_JFFS2_ZLIB=y
|
||||
# CONFIG_JFFS2_LZO is not set
|
||||
CONFIG_JFFS2_RTIME=y
|
||||
# CONFIG_JFFS2_RUBIN is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
|
|
@ -1224,10 +1154,7 @@ CONFIG_JFFS2_RTIME=y
|
|||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NETWORK_FILESYSTEMS=y
|
||||
CONFIG_NFS_FS=m
|
||||
CONFIG_NFS_V3=y
|
||||
# CONFIG_NFS_V3_ACL is not set
|
||||
|
|
@ -1247,17 +1174,12 @@ CONFIG_SMB_FS=m
|
|||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
# CONFIG_9P_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
CONFIG_NLS=m
|
||||
CONFIG_NLS_DEFAULT="iso8859-1"
|
||||
# CONFIG_NLS_CODEPAGE_437 is not set
|
||||
|
|
@ -1298,21 +1220,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
|
|||
# CONFIG_NLS_KOI8_R is not set
|
||||
# CONFIG_NLS_KOI8_U is not set
|
||||
# CONFIG_NLS_UTF8 is not set
|
||||
|
||||
#
|
||||
# Distributed Lock Manager
|
||||
#
|
||||
# CONFIG_DLM is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
CONFIG_INSTRUMENTATION=y
|
||||
# CONFIG_PROFILING is not set
|
||||
# CONFIG_MARKERS is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_ENABLE_WARN_DEPRECATED=y
|
||||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
|
|
@ -1320,6 +1237,7 @@ CONFIG_DEBUG_FS=y
|
|||
# CONFIG_HEADERS_CHECK is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_SAMPLES is not set
|
||||
CONFIG_DEBUG_MMRS=y
|
||||
CONFIG_DEBUG_HUNT_FOR_ZERO=y
|
||||
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
|
||||
|
|
@ -1339,11 +1257,7 @@ CONFIG_ACCESS_CHECK=y
|
|||
# CONFIG_KEYS is not set
|
||||
CONFIG_SECURITY=y
|
||||
# CONFIG_SECURITY_NETWORK is not set
|
||||
CONFIG_SECURITY_CAPABILITIES=m
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_SECURITY_CAPABILITIES is not set
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
|
|
@ -1354,6 +1268,7 @@ CONFIG_CRC_CCITT=m
|
|||
# CONFIG_CRC16 is not set
|
||||
# CONFIG_CRC_ITU_T is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_CRC7 is not set
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZLIB_DEFLATE=m
|
||||
|
|
|
|||
|
|
@ -365,7 +365,7 @@ CONFIG_C_AMBEN_ALL=y
|
|||
CONFIG_BANK_0=0x7BB0
|
||||
CONFIG_BANK_1=0x5554
|
||||
CONFIG_BANK_2=0x7BB0
|
||||
CONFIG_BANK_3=0x99B3
|
||||
CONFIG_BANK_3=0x99B2
|
||||
CONFIG_EBIU_MBSCTLVAL=0x0
|
||||
CONFIG_EBIU_MODEVAL=0x1
|
||||
CONFIG_EBIU_FCTLVAL=0x6
|
||||
|
|
@ -468,7 +468,60 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
|
|||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
CONFIG_IRDA=m
|
||||
|
||||
#
|
||||
# IrDA protocols
|
||||
#
|
||||
CONFIG_IRLAN=m
|
||||
CONFIG_IRCOMM=m
|
||||
# CONFIG_IRDA_ULTRA is not set
|
||||
|
||||
#
|
||||
# IrDA options
|
||||
#
|
||||
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
|
||||
# CONFIG_IRDA_FAST_RR is not set
|
||||
# CONFIG_IRDA_DEBUG is not set
|
||||
|
||||
#
|
||||
# Infrared-port device drivers
|
||||
#
|
||||
|
||||
#
|
||||
# SIR device drivers
|
||||
#
|
||||
CONFIG_IRTTY_SIR=m
|
||||
CONFIG_BFIN_SIR=m
|
||||
# CONFIG_BFIN_SIR0 is not set
|
||||
# CONFIG_BFIN_SIR2 is not set
|
||||
CONFIG_BFIN_SIR3=y
|
||||
CONFIG_SIR_BFIN_DMA=y
|
||||
# CONFIG_SIR_BFIN_PIO is not set
|
||||
|
||||
#
|
||||
# Dongle support
|
||||
#
|
||||
# CONFIG_DONGLE is not set
|
||||
# CONFIG_KINGSUN_DONGLE is not set
|
||||
# CONFIG_KSDAZZLE_DONGLE is not set
|
||||
# CONFIG_KS959_DONGLE is not set
|
||||
|
||||
#
|
||||
# Old SIR device drivers
|
||||
#
|
||||
# CONFIG_IRPORT_SIR is not set
|
||||
|
||||
#
|
||||
# Old Serial dongle support
|
||||
#
|
||||
|
||||
#
|
||||
# FIR device drivers
|
||||
#
|
||||
# CONFIG_USB_IRDA is not set
|
||||
# CONFIG_SIGMATEL_FIR is not set
|
||||
# CONFIG_MCS_FIR is not set
|
||||
# CONFIG_BT is not set
|
||||
# CONFIG_AF_RXRPC is not set
|
||||
|
||||
|
|
@ -575,6 +628,7 @@ CONFIG_MTD_NAND=y
|
|||
CONFIG_MTD_NAND_IDS=y
|
||||
CONFIG_MTD_NAND_BF5XX=y
|
||||
CONFIG_MTD_NAND_BF5XX_HWECC=y
|
||||
# CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC is not set
|
||||
# CONFIG_MTD_NAND_DISKONCHIP is not set
|
||||
# CONFIG_MTD_NAND_NANDSIM is not set
|
||||
# CONFIG_MTD_NAND_PLATFORM is not set
|
||||
|
|
@ -766,7 +820,7 @@ CONFIG_BFIN_OTP=y
|
|||
# CONFIG_BFIN_SPORT is not set
|
||||
# CONFIG_BFIN_TIMER_LATENCY is not set
|
||||
# CONFIG_TWI_LCD is not set
|
||||
# CONFIG_SIMPLE_GPIO is not set
|
||||
CONFIG_SIMPLE_GPIO=m
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_HW_CONSOLE=y
|
||||
|
|
@ -1071,6 +1125,7 @@ CONFIG_SND_BF5XX_SOC_AC97=y
|
|||
CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
|
||||
# CONFIG_SND_BF5XX_SOC_WM8750 is not set
|
||||
# CONFIG_SND_BF5XX_SOC_WM8731 is not set
|
||||
# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
|
||||
CONFIG_SND_BF5XX_SPORT_NUM=0
|
||||
CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
|
||||
CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
|
||||
|
|
@ -1133,7 +1188,7 @@ CONFIG_USB_MUSB_HOST=y
|
|||
# CONFIG_USB_MUSB_OTG is not set
|
||||
CONFIG_USB_MUSB_HDRC_HCD=y
|
||||
# CONFIG_MUSB_PIO_ONLY is not set
|
||||
# CONFIG_USB_INVENTRA_DMA is not set
|
||||
CONFIG_USB_INVENTRA_DMA=y
|
||||
# CONFIG_USB_TI_CPPI_DMA is not set
|
||||
CONFIG_USB_MUSB_LOGLEVEL=0
|
||||
|
||||
|
|
@ -1312,7 +1367,7 @@ CONFIG_FS_MBCACHE=y
|
|||
CONFIG_INOTIFY=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.22.16
|
||||
# Linux kernel version: 2.6.24.7
|
||||
#
|
||||
# CONFIG_MMU is not set
|
||||
# CONFIG_FPU is not set
|
||||
|
|
@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|||
CONFIG_GENERIC_HWEIGHT=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
CONFIG_GENERIC_IRQ_PROBE=y
|
||||
CONFIG_GENERIC_TIME=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_FORCE_MAX_ZONEORDER=14
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
# General setup
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
CONFIG_LOCALVERSION_AUTO=y
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_IPC_NS is not set
|
||||
CONFIG_SYSVIPC_SYSCTL=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
# CONFIG_TASKSTATS is not set
|
||||
# CONFIG_UTS_NS is not set
|
||||
# CONFIG_USER_NS is not set
|
||||
# CONFIG_PID_NS is not set
|
||||
# CONFIG_AUDIT is not set
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
# CONFIG_CGROUPS is not set
|
||||
CONFIG_FAIR_GROUP_SCHED=y
|
||||
CONFIG_FAIR_USER_SCHED=y
|
||||
# CONFIG_FAIR_CGROUP_SCHED is not set
|
||||
CONFIG_SYSFS_DEPRECATED=y
|
||||
# CONFIG_RELAY is not set
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
|
|
@ -64,32 +63,24 @@ CONFIG_EPOLL=y
|
|||
CONFIG_SIGNALFD=y
|
||||
CONFIG_EVENTFD=y
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
|
||||
# CONFIG_NP2 is not set
|
||||
CONFIG_SLAB=y
|
||||
# CONFIG_SLUB is not set
|
||||
# CONFIG_SLOB is not set
|
||||
CONFIG_SLABINFO=y
|
||||
CONFIG_RT_MUTEXES=y
|
||||
CONFIG_TINY_SHMEM=y
|
||||
CONFIG_BASE_SMALL=0
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
CONFIG_KMOD=y
|
||||
|
||||
#
|
||||
# Block layer
|
||||
#
|
||||
CONFIG_BLOCK=y
|
||||
# CONFIG_LBD is not set
|
||||
# CONFIG_BLK_DEV_IO_TRACE is not set
|
||||
# CONFIG_LSF is not set
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
|
|
@ -140,7 +131,6 @@ CONFIG_BF_REV_0_3=y
|
|||
# CONFIG_BF_REV_0_5 is not set
|
||||
# CONFIG_BF_REV_ANY is not set
|
||||
# CONFIG_BF_REV_NONE is not set
|
||||
CONFIG_BFIN_DUAL_CORE=y
|
||||
CONFIG_MEM_MT48LC16M16A2TG_75=y
|
||||
CONFIG_IRQ_PLL_WAKEUP=7
|
||||
CONFIG_IRQ_SPORT0_ERROR=7
|
||||
|
|
@ -233,12 +223,14 @@ CONFIG_IRQ_WDTIMER=13
|
|||
# Board customizations
|
||||
#
|
||||
# CONFIG_CMDLINE_BOOL is not set
|
||||
CONFIG_BOOT_LOAD=0x1000
|
||||
|
||||
#
|
||||
# Clock/PLL Setup
|
||||
#
|
||||
CONFIG_CLKIN_HZ=30000000
|
||||
# CONFIG_BFIN_KERNEL_CLOCK is not set
|
||||
CONFIG_MAX_MEM_SIZE=512
|
||||
CONFIG_MAX_VCO_HZ=600000000
|
||||
CONFIG_MIN_VCO_HZ=50000000
|
||||
CONFIG_MAX_SCLK_HZ=133333333
|
||||
|
|
@ -252,13 +244,17 @@ CONFIG_HZ_250=y
|
|||
# CONFIG_HZ_300 is not set
|
||||
# CONFIG_HZ_1000 is not set
|
||||
CONFIG_HZ=250
|
||||
CONFIG_GENERIC_TIME=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
# CONFIG_CYCLES_CLOCKSOURCE is not set
|
||||
CONFIG_TICK_ONESHOT=y
|
||||
# CONFIG_NO_HZ is not set
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
|
||||
#
|
||||
# Memory Setup
|
||||
# Misc
|
||||
#
|
||||
CONFIG_MAX_MEM_SIZE=512
|
||||
CONFIG_MEM_ADD_WIDTH=9
|
||||
CONFIG_BOOT_LOAD=0x1000
|
||||
CONFIG_BFIN_SCRATCH_REG_RETN=y
|
||||
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
|
||||
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
|
||||
|
|
@ -294,12 +290,14 @@ CONFIG_FLATMEM_MANUAL=y
|
|||
CONFIG_FLATMEM=y
|
||||
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4
|
||||
# CONFIG_RESOURCES_64BIT is not set
|
||||
CONFIG_ZONE_DMA_FLAG=1
|
||||
CONFIG_LARGE_ALLOCS=y
|
||||
CONFIG_VIRT_TO_BUS=y
|
||||
# CONFIG_BFIN_GPTIMERS is not set
|
||||
CONFIG_BFIN_DMA_5XX=y
|
||||
# CONFIG_DMA_UNCACHED_4M is not set
|
||||
# CONFIG_DMA_UNCACHED_2M is not set
|
||||
CONFIG_DMA_UNCACHED_1M=y
|
||||
# CONFIG_DMA_UNCACHED_NONE is not set
|
||||
|
|
@ -341,17 +339,13 @@ CONFIG_C_AMBEN_ALL=y
|
|||
CONFIG_BANK_0=0x7BB0
|
||||
CONFIG_BANK_1=0x7BB0
|
||||
CONFIG_BANK_2=0x7BB0
|
||||
CONFIG_BANK_3=0xAAC3
|
||||
CONFIG_BANK_3=0xAAC2
|
||||
|
||||
#
|
||||
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
|
||||
#
|
||||
# CONFIG_PCI is not set
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
|
|
@ -367,8 +361,14 @@ CONFIG_BINFMT_ZFLAT=y
|
|||
# Power management options
|
||||
#
|
||||
# CONFIG_PM is not set
|
||||
CONFIG_SUSPEND_UP_POSSIBLE=y
|
||||
# CONFIG_PM_WAKEUP_BY_GPIO is not set
|
||||
|
||||
#
|
||||
# CPU Frequency scaling
|
||||
#
|
||||
# CONFIG_CPU_FREQ is not set
|
||||
|
||||
#
|
||||
# Networking
|
||||
#
|
||||
|
|
@ -405,6 +405,7 @@ CONFIG_SYN_COOKIES=y
|
|||
CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
||||
CONFIG_INET_XFRM_MODE_TUNNEL=y
|
||||
CONFIG_INET_XFRM_MODE_BEET=y
|
||||
# CONFIG_INET_LRO is not set
|
||||
CONFIG_INET_DIAG=y
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
|
|
@ -431,10 +432,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
|
|||
# CONFIG_LAPB is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
|
||||
#
|
||||
|
|
@ -466,6 +463,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
|
|||
# SIR device drivers
|
||||
#
|
||||
CONFIG_IRTTY_SIR=m
|
||||
# CONFIG_BFIN_SIR is not set
|
||||
|
||||
#
|
||||
# Dongle support
|
||||
|
|
@ -495,6 +493,7 @@ CONFIG_IRTTY_SIR=m
|
|||
# CONFIG_MAC80211 is not set
|
||||
# CONFIG_IEEE80211 is not set
|
||||
# CONFIG_RFKILL is not set
|
||||
# CONFIG_NET_9P is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
|
|
@ -503,14 +502,11 @@ CONFIG_IRTTY_SIR=m
|
|||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
# CONFIG_SYS_HYPERVISOR is not set
|
||||
|
||||
#
|
||||
# Connector - unified userspace <-> kernelspace linker
|
||||
#
|
||||
# CONFIG_CONNECTOR is not set
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
|
|
@ -530,6 +526,7 @@ CONFIG_MTD_BLOCK=y
|
|||
# CONFIG_INFTL is not set
|
||||
# CONFIG_RFD_FTL is not set
|
||||
# CONFIG_SSFDC is not set
|
||||
# CONFIG_MTD_OOPS is not set
|
||||
|
||||
#
|
||||
# RAM/ROM/Flash chip drivers
|
||||
|
|
@ -590,20 +587,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
|
|||
# UBI - Unsorted block images
|
||||
#
|
||||
# CONFIG_MTD_UBI is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
# CONFIG_PNPACPI is not set
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
CONFIG_BLK_DEV=y
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
|
|
@ -613,10 +598,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
|
|||
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
CONFIG_MISC_DEVICES=y
|
||||
# CONFIG_EEPROM_93CX6 is not set
|
||||
# CONFIG_IDE is not set
|
||||
|
||||
#
|
||||
|
|
@ -624,32 +607,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|||
#
|
||||
# CONFIG_RAID_ATTRS is not set
|
||||
# CONFIG_SCSI is not set
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
# CONFIG_SCSI_NETLINK is not set
|
||||
# CONFIG_ATA is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Network device support
|
||||
#
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_MACVLAN is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
# CONFIG_VETH is not set
|
||||
# CONFIG_PHYLIB is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_SMC91X=y
|
||||
# CONFIG_SMSC911X is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
||||
# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
||||
# CONFIG_IBM_NEW_EMAC_TAH is not set
|
||||
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
||||
# CONFIG_B44 is not set
|
||||
CONFIG_NETDEV_1000=y
|
||||
# CONFIG_AX88180 is not set
|
||||
CONFIG_NETDEV_10000=y
|
||||
|
|
@ -666,15 +646,7 @@ CONFIG_NETDEV_10000=y
|
|||
# CONFIG_NETCONSOLE is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Telephony Support
|
||||
#
|
||||
# CONFIG_PHONE is not set
|
||||
|
||||
#
|
||||
|
|
@ -689,7 +661,6 @@ CONFIG_INPUT=m
|
|||
#
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
CONFIG_INPUT_EVDEV=m
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
|
|
@ -714,13 +685,12 @@ CONFIG_INPUT_EVDEV=m
|
|||
#
|
||||
# CONFIG_AD9960 is not set
|
||||
# CONFIG_SPI_ADC_BF533 is not set
|
||||
# CONFIG_BF5xx_PFLAGS is not set
|
||||
# CONFIG_BF5xx_PPIFCD is not set
|
||||
# CONFIG_BFIN_SIMPLE_TIMER is not set
|
||||
# CONFIG_BF5xx_PPI is not set
|
||||
# CONFIG_BFIN_SPORT is not set
|
||||
# CONFIG_BFIN_TIMER_LATENCY is not set
|
||||
# CONFIG_AD5304 is not set
|
||||
CONFIG_SIMPLE_GPIO=m
|
||||
# CONFIG_VT is not set
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
|
|
@ -748,27 +718,11 @@ CONFIG_UNIX98_PTYS=y
|
|||
# CAN, the car bus and industrial fieldbus
|
||||
#
|
||||
# CONFIG_CAN4LINUX is not set
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
# CONFIG_WATCHDOG_NOWAYOUT is not set
|
||||
|
||||
#
|
||||
# Watchdog Device Drivers
|
||||
#
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
CONFIG_BFIN_WDT=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
# CONFIG_GEN_RTC is not set
|
||||
# CONFIG_R3964 is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
# CONFIG_TCG_TPM is not set
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
|
|
@ -789,22 +743,37 @@ CONFIG_SPI_BFIN=y
|
|||
#
|
||||
# CONFIG_SPI_AT25 is not set
|
||||
# CONFIG_SPI_SPIDEV is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_SPI_TLE62X0 is not set
|
||||
# CONFIG_W1 is not set
|
||||
# CONFIG_POWER_SUPPLY is not set
|
||||
CONFIG_HWMON=y
|
||||
# CONFIG_HWMON_VID is not set
|
||||
# CONFIG_SENSORS_ABITUGURU is not set
|
||||
# CONFIG_SENSORS_F71805F is not set
|
||||
# CONFIG_SENSORS_F71882FG is not set
|
||||
# CONFIG_SENSORS_IT87 is not set
|
||||
# CONFIG_SENSORS_LM70 is not set
|
||||
# CONFIG_SENSORS_PC87360 is not set
|
||||
# CONFIG_SENSORS_PC87427 is not set
|
||||
# CONFIG_SENSORS_SMSC47M1 is not set
|
||||
# CONFIG_SENSORS_SMSC47B397 is not set
|
||||
# CONFIG_SENSORS_VT1211 is not set
|
||||
# CONFIG_SENSORS_W83627HF is not set
|
||||
# CONFIG_SENSORS_W83627EHF is not set
|
||||
# CONFIG_HWMON_DEBUG_CHIP is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
# CONFIG_WATCHDOG_NOWAYOUT is not set
|
||||
|
||||
#
|
||||
# Watchdog Device Drivers
|
||||
#
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
CONFIG_BFIN_WDT=y
|
||||
|
||||
#
|
||||
# Sonics Silicon Backplane
|
||||
#
|
||||
CONFIG_SSB_POSSIBLE=y
|
||||
# CONFIG_SSB is not set
|
||||
|
||||
#
|
||||
# Multifunction device drivers
|
||||
|
|
@ -821,91 +790,33 @@ CONFIG_DAB=y
|
|||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_VGASTATE is not set
|
||||
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
||||
# CONFIG_FB is not set
|
||||
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||
|
||||
#
|
||||
# Display device support
|
||||
#
|
||||
# CONFIG_DISPLAY_SUPPORT is not set
|
||||
# CONFIG_VGASTATE is not set
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# HID Devices
|
||||
#
|
||||
CONFIG_HID_SUPPORT=y
|
||||
CONFIG_HID=m
|
||||
# CONFIG_HID_DEBUG is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
# CONFIG_USB is not set
|
||||
|
||||
#
|
||||
# Enable Host or Gadget support to see Inventra options
|
||||
#
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
# CONFIG_HIDRAW is not set
|
||||
# CONFIG_USB_SUPPORT is not set
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# LED devices
|
||||
#
|
||||
# CONFIG_NEW_LEDS is not set
|
||||
|
||||
#
|
||||
# LED drivers
|
||||
#
|
||||
|
||||
#
|
||||
# LED Triggers
|
||||
#
|
||||
|
||||
#
|
||||
# InfiniBand support
|
||||
#
|
||||
|
||||
#
|
||||
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
|
||||
#
|
||||
|
||||
#
|
||||
# Real Time Clock
|
||||
#
|
||||
# CONFIG_RTC_CLASS is not set
|
||||
|
||||
#
|
||||
# DMA Engine support
|
||||
# Userspace I/O
|
||||
#
|
||||
# CONFIG_DMA_ENGINE is not set
|
||||
|
||||
#
|
||||
# DMA Clients
|
||||
#
|
||||
|
||||
#
|
||||
# DMA Devices
|
||||
#
|
||||
|
||||
#
|
||||
# PBX support
|
||||
#
|
||||
# CONFIG_PBX is not set
|
||||
# CONFIG_UIO is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
|
|
@ -950,7 +861,6 @@ CONFIG_PROC_SYSCTL=y
|
|||
CONFIG_SYSFS=y
|
||||
# CONFIG_TMPFS is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
# CONFIG_CONFIGFS_FS is not set
|
||||
|
||||
#
|
||||
|
|
@ -976,10 +886,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|||
CONFIG_JFFS2_FS=m
|
||||
CONFIG_JFFS2_FS_DEBUG=0
|
||||
CONFIG_JFFS2_FS_WRITEBUFFER=y
|
||||
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
|
||||
# CONFIG_JFFS2_SUMMARY is not set
|
||||
# CONFIG_JFFS2_FS_XATTR is not set
|
||||
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
||||
CONFIG_JFFS2_ZLIB=y
|
||||
# CONFIG_JFFS2_LZO is not set
|
||||
CONFIG_JFFS2_RTIME=y
|
||||
# CONFIG_JFFS2_RUBIN is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
|
|
@ -988,10 +900,7 @@ CONFIG_JFFS2_RTIME=y
|
|||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NETWORK_FILESYSTEMS=y
|
||||
CONFIG_NFS_FS=m
|
||||
CONFIG_NFS_V3=y
|
||||
# CONFIG_NFS_V3_ACL is not set
|
||||
|
|
@ -1011,17 +920,12 @@ CONFIG_SMB_FS=m
|
|||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
# CONFIG_9P_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
CONFIG_NLS=m
|
||||
CONFIG_NLS_DEFAULT="iso8859-1"
|
||||
# CONFIG_NLS_CODEPAGE_437 is not set
|
||||
|
|
@ -1062,21 +966,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
|
|||
# CONFIG_NLS_KOI8_R is not set
|
||||
# CONFIG_NLS_KOI8_U is not set
|
||||
# CONFIG_NLS_UTF8 is not set
|
||||
|
||||
#
|
||||
# Distributed Lock Manager
|
||||
#
|
||||
# CONFIG_DLM is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
CONFIG_INSTRUMENTATION=y
|
||||
# CONFIG_PROFILING is not set
|
||||
# CONFIG_MARKERS is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_ENABLE_WARN_DEPRECATED=y
|
||||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
|
|
@ -1084,6 +983,7 @@ CONFIG_DEBUG_FS=y
|
|||
# CONFIG_HEADERS_CHECK is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_SAMPLES is not set
|
||||
CONFIG_DEBUG_MMRS=y
|
||||
CONFIG_DEBUG_HUNT_FOR_ZERO=y
|
||||
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
|
||||
|
|
@ -1104,11 +1004,7 @@ CONFIG_ACCESS_CHECK=y
|
|||
# CONFIG_KEYS is not set
|
||||
CONFIG_SECURITY=y
|
||||
# CONFIG_SECURITY_NETWORK is not set
|
||||
CONFIG_SECURITY_CAPABILITIES=m
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_SECURITY_CAPABILITIES is not set
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
|
|
@ -1119,6 +1015,7 @@ CONFIG_CRC_CCITT=m
|
|||
# CONFIG_CRC16 is not set
|
||||
# CONFIG_CRC_ITU_T is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_CRC7 is not set
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZLIB_DEFLATE=m
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
|
|
@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
|
|||
# CONFIG_TASKSTATS is not set
|
||||
# CONFIG_UTS_NS is not set
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SYSFS_DEPRECATED=y
|
||||
# CONFIG_RELAY is not set
|
||||
|
|
@ -291,7 +292,7 @@ CONFIG_C_AMBEN_ALL=y
|
|||
CONFIG_BANK_0=0x7BB0
|
||||
CONFIG_BANK_1=0x7BB0
|
||||
CONFIG_BANK_2=0x7BB0
|
||||
CONFIG_BANK_3=0xFFC3
|
||||
CONFIG_BANK_3=0xFFC2
|
||||
|
||||
#
|
||||
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
|
||||
|
|
@ -617,8 +618,7 @@ CONFIG_SERIAL_CORE=y
|
|||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_SERIAL_BFIN_SPORT is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
|
||||
#
|
||||
# CAN, the car bus and industrial fieldbus
|
||||
|
|
@ -778,7 +778,7 @@ CONFIG_FS_MBCACHE=y
|
|||
CONFIG_INOTIFY=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
|
@ -866,11 +866,11 @@ CONFIG_MSDOS_PARTITION=y
|
|||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
CONFIG_DEBUG_FS=y
|
||||
# CONFIG_HEADERS_CHECK is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_DEBUG_MMRS is not set
|
||||
CONFIG_DEBUG_MMRS=y
|
||||
CONFIG_DEBUG_HUNT_FOR_ZERO=y
|
||||
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
|
||||
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
|
||||
|
|
|
|||
|
|
@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
|
|||
# CONFIG_TASKSTATS is not set
|
||||
# CONFIG_UTS_NS is not set
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SYSFS_DEPRECATED=y
|
||||
# CONFIG_RELAY is not set
|
||||
|
|
@ -299,7 +300,7 @@ CONFIG_C_AMBEN_ALL=y
|
|||
CONFIG_BANK_0=0x7BB0
|
||||
CONFIG_BANK_1=0x7BB0
|
||||
CONFIG_BANK_2=0x7BB0
|
||||
CONFIG_BANK_3=0xFFC3
|
||||
CONFIG_BANK_3=0xFFC2
|
||||
|
||||
#
|
||||
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
|
||||
|
|
@ -351,7 +352,10 @@ CONFIG_INET=y
|
|||
# CONFIG_IP_MULTICAST is not set
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_FIB_HASH=y
|
||||
# CONFIG_IP_PNP is not set
|
||||
CONFIG_IP_PNP=y
|
||||
# CONFIG_IP_PNP_DHCP is not set
|
||||
# CONFIG_IP_PNP_BOOTP is not set
|
||||
# CONFIG_IP_PNP_RARP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
|
|
@ -645,8 +649,7 @@ CONFIG_SERIAL_CORE=y
|
|||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_SERIAL_BFIN_SPORT is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
|
||||
#
|
||||
# CAN, the car bus and industrial fieldbus
|
||||
|
|
@ -806,7 +809,7 @@ CONFIG_FS_MBCACHE=y
|
|||
CONFIG_INOTIFY=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
|
@ -894,12 +897,12 @@ CONFIG_MSDOS_PARTITION=y
|
|||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
CONFIG_DEBUG_FS=y
|
||||
# CONFIG_HEADERS_CHECK is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_DEBUG_MMRS is not set
|
||||
# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
|
||||
CONFIG_DEBUG_MMRS=y
|
||||
CONFIG_DEBUG_HUNT_FOR_ZERO=y
|
||||
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
|
||||
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
|
||||
# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
|
||||
|
|
|
|||
|
|
@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
|
|||
# CONFIG_TASKSTATS is not set
|
||||
# CONFIG_UTS_NS is not set
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SYSFS_DEPRECATED=y
|
||||
# CONFIG_RELAY is not set
|
||||
|
|
@ -298,8 +299,8 @@ CONFIG_C_AMBEN_ALL=y
|
|||
#
|
||||
CONFIG_BANK_0=0x7BB0
|
||||
CONFIG_BANK_1=0x7BB0
|
||||
CONFIG_BANK_2=0xFFC3
|
||||
CONFIG_BANK_3=0xFFC3
|
||||
CONFIG_BANK_2=0xFFC2
|
||||
CONFIG_BANK_3=0xFFC2
|
||||
|
||||
#
|
||||
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
|
||||
|
|
@ -628,8 +629,7 @@ CONFIG_SERIAL_CORE=y
|
|||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_SERIAL_BFIN_SPORT is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
|
||||
#
|
||||
# CAN, the car bus and industrial fieldbus
|
||||
|
|
@ -806,7 +806,7 @@ CONFIG_FS_MBCACHE=y
|
|||
CONFIG_INOTIFY=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
|
@ -894,12 +894,12 @@ CONFIG_MSDOS_PARTITION=y
|
|||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
CONFIG_DEBUG_FS=y
|
||||
# CONFIG_HEADERS_CHECK is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_DEBUG_MMRS is not set
|
||||
# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
|
||||
CONFIG_DEBUG_MMRS=y
|
||||
CONFIG_DEBUG_HUNT_FOR_ZERO=y
|
||||
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
|
||||
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
|
||||
# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
|
||||
|
|
|
|||
|
|
@ -363,7 +363,7 @@ CONFIG_C_AMBEN_ALL=y
|
|||
CONFIG_BANK_0=0x7BB0
|
||||
CONFIG_BANK_1=0x5554
|
||||
CONFIG_BANK_2=0x7BB0
|
||||
CONFIG_BANK_3=0x99B3
|
||||
CONFIG_BANK_3=0x99B2
|
||||
CONFIG_EBIU_MBSCTLVAL=0x0
|
||||
CONFIG_EBIU_MODEVAL=0x1
|
||||
CONFIG_EBIU_FCTLVAL=0x6
|
||||
|
|
@ -744,8 +744,8 @@ CONFIG_BFIN_OTP=y
|
|||
#
|
||||
CONFIG_SERIAL_BFIN=y
|
||||
CONFIG_SERIAL_BFIN_CONSOLE=y
|
||||
# CONFIG_SERIAL_BFIN_DMA is not set
|
||||
CONFIG_SERIAL_BFIN_PIO=y
|
||||
CONFIG_SERIAL_BFIN_DMA=y
|
||||
# CONFIG_SERIAL_BFIN_PIO is not set
|
||||
# CONFIG_SERIAL_BFIN_UART0 is not set
|
||||
CONFIG_SERIAL_BFIN_UART1=y
|
||||
# CONFIG_BFIN_UART1_CTSRTS is not set
|
||||
|
|
@ -1149,7 +1149,7 @@ CONFIG_RTC_DRV_BFIN=y
|
|||
CONFIG_INOTIFY=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
|
@ -1332,7 +1332,7 @@ CONFIG_DEBUG_FS=y
|
|||
# CONFIG_DEBUG_KERNEL is not set
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_SAMPLES is not set
|
||||
# CONFIG_DEBUG_MMRS is not set
|
||||
CONFIG_DEBUG_MMRS=y
|
||||
CONFIG_DEBUG_HUNT_FOR_ZERO=y
|
||||
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
|
||||
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
|
||||
|
|
|
|||
|
|
@ -35,7 +35,8 @@ CONFIG_SYSVIPC_SYSCTL=y
|
|||
# CONFIG_USER_NS is not set
|
||||
# CONFIG_PID_NS is not set
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
# CONFIG_CGROUPS is not set
|
||||
CONFIG_FAIR_GROUP_SCHED=y
|
||||
|
|
@ -341,7 +342,7 @@ CONFIG_C_AMBEN_ALL=y
|
|||
CONFIG_BANK_0=0x7BB0
|
||||
CONFIG_BANK_1=0x7BB0
|
||||
CONFIG_BANK_2=0x7BB0
|
||||
CONFIG_BANK_3=0xFFC3
|
||||
CONFIG_BANK_3=0xFFC2
|
||||
|
||||
#
|
||||
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
|
||||
|
|
@ -631,8 +632,7 @@ CONFIG_SERIAL_CORE=y
|
|||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_SERIAL_BFIN_SPORT is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
|
||||
#
|
||||
# CAN, the car bus and industrial fieldbus
|
||||
|
|
@ -756,7 +756,7 @@ CONFIG_FS_MBCACHE=y
|
|||
CONFIG_INOTIFY=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
|
@ -830,12 +830,12 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
|
|||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
CONFIG_DEBUG_FS=y
|
||||
# CONFIG_HEADERS_CHECK is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_SAMPLES is not set
|
||||
# CONFIG_DEBUG_MMRS is not set
|
||||
CONFIG_DEBUG_MMRS=y
|
||||
CONFIG_DEBUG_HUNT_FOR_ZERO=y
|
||||
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
|
||||
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
|
||||
|
|
|
|||
|
|
@ -967,7 +967,7 @@ CONFIG_FS_MBCACHE=y
|
|||
CONFIG_INOTIFY=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
|
|
|||
|
|
@ -1066,7 +1066,7 @@ CONFIG_FS_MBCACHE=y
|
|||
CONFIG_INOTIFY=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
|
|
|||
|
|
@ -294,7 +294,7 @@ CONFIG_C_AMBEN_ALL=y
|
|||
CONFIG_BANK_0=0x7BB0
|
||||
CONFIG_BANK_1=0x33B0
|
||||
CONFIG_BANK_2=0x33B0
|
||||
CONFIG_BANK_3=0x99B3
|
||||
CONFIG_BANK_3=0x99B2
|
||||
|
||||
#
|
||||
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
|
||||
|
|
@ -1080,7 +1080,7 @@ CONFIG_FS_MBCACHE=y
|
|||
CONFIG_INOTIFY=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
|
|
|||
|
|
@ -1067,7 +1067,7 @@ CONFIG_FS_MBCACHE=y
|
|||
CONFIG_INOTIFY=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
|
|
|||
|
|
@ -18,6 +18,5 @@ endif
|
|||
obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o
|
||||
obj-$(CONFIG_MODULES) += module.o
|
||||
obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o
|
||||
obj-$(CONFIG_DUAL_CORE_TEST_MODULE) += dualcore_test.o
|
||||
obj-$(CONFIG_KGDB) += kgdb.o
|
||||
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
||||
|
|
|
|||
|
|
@ -472,6 +472,40 @@ unsigned long get_dma_curr_addr(unsigned int channel)
|
|||
}
|
||||
EXPORT_SYMBOL(get_dma_curr_addr);
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
int blackfin_dma_suspend(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
#ifdef CONFIG_BF561 /* IMDMA channels doesn't have a PERIPHERAL_MAP */
|
||||
for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) {
|
||||
#else
|
||||
for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) {
|
||||
#endif
|
||||
if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) {
|
||||
printk(KERN_ERR "DMA Channel %d failed to suspend\n", i);
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void blackfin_dma_resume(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
#ifdef CONFIG_BF561 /* IMDMA channels doesn't have a PERIPHERAL_MAP */
|
||||
for (i = 0; i <= CH_MEM_STREAM3_SRC; i++)
|
||||
#else
|
||||
for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++)
|
||||
#endif
|
||||
dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
|
||||
}
|
||||
#endif
|
||||
|
||||
static void *__dma_memcpy(void *dest, const void *src, size_t size)
|
||||
{
|
||||
int direction; /* 1 - address decrease, 0 - address increase */
|
||||
|
|
|
|||
|
|
@ -186,7 +186,10 @@ static struct str_ident {
|
|||
char name[RESOURCE_LABEL_SIZE];
|
||||
} str_ident[MAX_RESOURCES];
|
||||
|
||||
#if defined(CONFIG_PM) && !defined(CONFIG_BF54x)
|
||||
#if defined(CONFIG_PM)
|
||||
#if defined(CONFIG_BF54x)
|
||||
static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
|
||||
#else
|
||||
static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
|
||||
static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
|
||||
static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
|
||||
|
|
@ -206,7 +209,7 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PORTF_INT
|
|||
#ifdef BF561_FAMILY
|
||||
static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB};
|
||||
#endif
|
||||
|
||||
#endif
|
||||
#endif /* CONFIG_PM */
|
||||
|
||||
#if defined(BF548_FAMILY)
|
||||
|
|
@ -667,7 +670,7 @@ static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type)
|
|||
return 0;
|
||||
}
|
||||
|
||||
u32 bfin_pm_setup(void)
|
||||
u32 bfin_pm_standby_setup(void)
|
||||
{
|
||||
u16 bank, mask, i, gpio;
|
||||
|
||||
|
|
@ -679,7 +682,7 @@ u32 bfin_pm_setup(void)
|
|||
gpio_bankb[bank]->maskb = 0;
|
||||
|
||||
if (mask) {
|
||||
#ifdef BF537_FAMILY
|
||||
#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
|
||||
gpio_bank_saved[bank].fer = *port_fer[bank];
|
||||
#endif
|
||||
gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen;
|
||||
|
|
@ -715,7 +718,7 @@ u32 bfin_pm_setup(void)
|
|||
return 0;
|
||||
}
|
||||
|
||||
void bfin_pm_restore(void)
|
||||
void bfin_pm_standby_restore(void)
|
||||
{
|
||||
u16 bank, mask, i;
|
||||
|
||||
|
|
@ -724,7 +727,7 @@ void bfin_pm_restore(void)
|
|||
bank = gpio_bank(i);
|
||||
|
||||
if (mask) {
|
||||
#ifdef BF537_FAMILY
|
||||
#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
|
||||
*port_fer[bank] = gpio_bank_saved[bank].fer;
|
||||
#endif
|
||||
gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen;
|
||||
|
|
@ -743,8 +746,111 @@ void bfin_pm_restore(void)
|
|||
AWA_DUMMY_READ(maskb);
|
||||
}
|
||||
|
||||
void bfin_gpio_pm_hibernate_suspend(void)
|
||||
{
|
||||
int i, bank;
|
||||
|
||||
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
|
||||
bank = gpio_bank(i);
|
||||
|
||||
#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
|
||||
gpio_bank_saved[bank].fer = *port_fer[bank];
|
||||
#ifdef BF527_FAMILY
|
||||
gpio_bank_saved[bank].mux = *port_mux[bank];
|
||||
#else
|
||||
if (bank == 0)
|
||||
gpio_bank_saved[bank].mux = bfin_read_PORT_MUX();
|
||||
#endif
|
||||
#endif
|
||||
gpio_bank_saved[bank].data = gpio_bankb[bank]->data;
|
||||
gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen;
|
||||
gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
|
||||
gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir;
|
||||
gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge;
|
||||
gpio_bank_saved[bank].both = gpio_bankb[bank]->both;
|
||||
gpio_bank_saved[bank].maska = gpio_bankb[bank]->maska;
|
||||
}
|
||||
|
||||
AWA_DUMMY_READ(maska);
|
||||
}
|
||||
|
||||
void bfin_gpio_pm_hibernate_restore(void)
|
||||
{
|
||||
int i, bank;
|
||||
|
||||
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
|
||||
bank = gpio_bank(i);
|
||||
|
||||
#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
|
||||
#ifdef BF527_FAMILY
|
||||
*port_mux[bank] = gpio_bank_saved[bank].mux;
|
||||
#else
|
||||
if (bank == 0)
|
||||
bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
|
||||
#endif
|
||||
*port_fer[bank] = gpio_bank_saved[bank].fer;
|
||||
#endif
|
||||
gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen;
|
||||
gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir;
|
||||
gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
|
||||
gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge;
|
||||
gpio_bankb[bank]->both = gpio_bank_saved[bank].both;
|
||||
|
||||
gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data
|
||||
| gpio_bank_saved[bank].dir;
|
||||
|
||||
gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska;
|
||||
}
|
||||
AWA_DUMMY_READ(maska);
|
||||
}
|
||||
|
||||
|
||||
#endif
|
||||
#else /* BF548_FAMILY */
|
||||
#ifdef CONFIG_PM
|
||||
|
||||
u32 bfin_pm_standby_setup(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
void bfin_pm_standby_restore(void)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
void bfin_gpio_pm_hibernate_suspend(void)
|
||||
{
|
||||
int i, bank;
|
||||
|
||||
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
|
||||
bank = gpio_bank(i);
|
||||
|
||||
gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer;
|
||||
gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux;
|
||||
gpio_bank_saved[bank].data = gpio_array[bank]->port_data;
|
||||
gpio_bank_saved[bank].data = gpio_array[bank]->port_data;
|
||||
gpio_bank_saved[bank].inen = gpio_array[bank]->port_inen;
|
||||
gpio_bank_saved[bank].dir = gpio_array[bank]->port_dir_set;
|
||||
}
|
||||
}
|
||||
|
||||
void bfin_gpio_pm_hibernate_restore(void)
|
||||
{
|
||||
int i, bank;
|
||||
|
||||
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
|
||||
bank = gpio_bank(i);
|
||||
|
||||
gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux;
|
||||
gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer;
|
||||
gpio_array[bank]->port_inen = gpio_bank_saved[bank].inen;
|
||||
gpio_array[bank]->port_dir_set = gpio_bank_saved[bank].dir;
|
||||
gpio_array[bank]->port_set = gpio_bank_saved[bank].data
|
||||
| gpio_bank_saved[bank].dir;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
unsigned short get_gpio_dir(unsigned gpio)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -125,6 +125,6 @@ ENTRY(__cplb_hdr)
|
|||
SP += -12;
|
||||
call _panic_cplb_error;
|
||||
SP += 12;
|
||||
JUMP _handle_bad_cplb;
|
||||
JUMP.L _handle_bad_cplb;
|
||||
|
||||
ENDPROC(__cplb_hdr)
|
||||
|
|
|
|||
|
|
@ -26,11 +26,7 @@
|
|||
#include <asm/cplb.h>
|
||||
#include <asm/cplbinit.h>
|
||||
|
||||
#ifdef CONFIG_MAX_MEM_SIZE
|
||||
#define CPLB_MEM CONFIG_MAX_MEM_SIZE
|
||||
#else
|
||||
# define CPLB_MEM CONFIG_MEM_SIZE
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Number of required data CPLB switchtable entries
|
||||
|
|
|
|||
|
|
@ -1,49 +0,0 @@
|
|||
/*
|
||||
* File: arch/blackfin/kernel/dualcore_test.c
|
||||
* Based on:
|
||||
* Author:
|
||||
*
|
||||
* Created:
|
||||
* Description: Small test code for CoreB on a BF561
|
||||
*
|
||||
* Modified:
|
||||
* Copyright 2004-2006 Analog Devices Inc.
|
||||
*
|
||||
* Bugs: Enter bugs at http://blackfin.uclinux.org/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, see the file COPYING, or write
|
||||
* to the Free Software Foundation, Inc.,
|
||||
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/module.h>
|
||||
|
||||
static int *testarg = (int *)0xfeb00000;
|
||||
|
||||
static int test_init(void)
|
||||
{
|
||||
*testarg = 1;
|
||||
printk(KERN_INFO "Dual core test module inserted: set testarg = [%d]\n @ [%p]\n",
|
||||
*testarg, testarg);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void test_exit(void)
|
||||
{
|
||||
printk(KERN_INFO "Dual core test module removed: testarg = [%d]\n", *testarg);
|
||||
}
|
||||
|
||||
module_init(test_init);
|
||||
module_exit(test_exit);
|
||||
|
|
@ -64,6 +64,11 @@ ENDPROC(_ret_from_fork)
|
|||
|
||||
ENTRY(_sys_fork)
|
||||
r0 = -EINVAL;
|
||||
#if (ANOMALY_05000371)
|
||||
nop;
|
||||
nop;
|
||||
nop;
|
||||
#endif
|
||||
rts;
|
||||
ENDPROC(_sys_fork)
|
||||
|
||||
|
|
|
|||
|
|
@ -203,6 +203,8 @@ struct hw_breakpoint {
|
|||
|
||||
int kgdb_arch_init(void)
|
||||
{
|
||||
debugger_step = 0;
|
||||
|
||||
kgdb_remove_all_hw_break();
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -368,6 +370,7 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo,
|
|||
char *ptr;
|
||||
int newPC;
|
||||
int wp_status;
|
||||
int i;
|
||||
|
||||
switch (remcom_in_buffer[0]) {
|
||||
case 'c':
|
||||
|
|
@ -392,7 +395,18 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo,
|
|||
/* set the trace bit if we're stepping */
|
||||
if (remcom_in_buffer[0] == 's') {
|
||||
linux_regs->syscfg |= 0x1;
|
||||
debugger_step = 1;
|
||||
debugger_step = linux_regs->ipend;
|
||||
debugger_step >>= 6;
|
||||
for (i = 10; i > 0; i--, debugger_step >>= 1)
|
||||
if (debugger_step & 1)
|
||||
break;
|
||||
/* i indicate event priority of current stopped instruction
|
||||
* user space instruction is 0, IVG15 is 1, IVTMR is 10.
|
||||
* debugger_step > 0 means in single step mode
|
||||
*/
|
||||
debugger_step = i + 1;
|
||||
} else {
|
||||
debugger_step = 0;
|
||||
}
|
||||
|
||||
wp_status = bfin_read_WPSTAT();
|
||||
|
|
|
|||
|
|
@ -173,7 +173,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
|
|||
for (s = sechdrs; s < sechdrs_end; ++s) {
|
||||
if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) ||
|
||||
((strcmp(".text", secstrings + s->sh_name) == 0) &&
|
||||
(hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) {
|
||||
(hdr->e_flags & EF_BFIN_CODE_IN_L1) && (s->sh_size > 0))) {
|
||||
dest = l1_inst_sram_alloc(s->sh_size);
|
||||
mod->arch.text_l1 = dest;
|
||||
if (dest == NULL) {
|
||||
|
|
@ -188,7 +188,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
|
|||
}
|
||||
if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) ||
|
||||
((strcmp(".data", secstrings + s->sh_name) == 0) &&
|
||||
(hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
|
||||
(hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
|
||||
dest = l1_data_sram_alloc(s->sh_size);
|
||||
mod->arch.data_a_l1 = dest;
|
||||
if (dest == NULL) {
|
||||
|
|
@ -203,7 +203,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
|
|||
}
|
||||
if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
|
||||
((strcmp(".bss", secstrings + s->sh_name) == 0) &&
|
||||
(hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
|
||||
(hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
|
||||
dest = l1_data_sram_alloc(s->sh_size);
|
||||
mod->arch.bss_a_l1 = dest;
|
||||
if (dest == NULL) {
|
||||
|
|
@ -242,6 +242,51 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
|
|||
s->sh_flags &= ~SHF_ALLOC;
|
||||
s->sh_addr = (unsigned long)dest;
|
||||
}
|
||||
if ((strcmp(".l2.text", secstrings + s->sh_name) == 0) ||
|
||||
((strcmp(".text", secstrings + s->sh_name) == 0) &&
|
||||
(hdr->e_flags & EF_BFIN_CODE_IN_L2) && (s->sh_size > 0))) {
|
||||
dest = l2_sram_alloc(s->sh_size);
|
||||
mod->arch.text_l2 = dest;
|
||||
if (dest == NULL) {
|
||||
printk(KERN_ERR
|
||||
"module %s: L2 SRAM allocation failed\n",
|
||||
mod->name);
|
||||
return -1;
|
||||
}
|
||||
memcpy(dest, (void *)s->sh_addr, s->sh_size);
|
||||
s->sh_flags &= ~SHF_ALLOC;
|
||||
s->sh_addr = (unsigned long)dest;
|
||||
}
|
||||
if ((strcmp(".l2.data", secstrings + s->sh_name) == 0) ||
|
||||
((strcmp(".data", secstrings + s->sh_name) == 0) &&
|
||||
(hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
|
||||
dest = l2_sram_alloc(s->sh_size);
|
||||
mod->arch.data_l2 = dest;
|
||||
if (dest == NULL) {
|
||||
printk(KERN_ERR
|
||||
"module %s: L2 SRAM allocation failed\n",
|
||||
mod->name);
|
||||
return -1;
|
||||
}
|
||||
memcpy(dest, (void *)s->sh_addr, s->sh_size);
|
||||
s->sh_flags &= ~SHF_ALLOC;
|
||||
s->sh_addr = (unsigned long)dest;
|
||||
}
|
||||
if (strcmp(".l2.bss", secstrings + s->sh_name) == 0 ||
|
||||
((strcmp(".bss", secstrings + s->sh_name) == 0) &&
|
||||
(hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
|
||||
dest = l2_sram_alloc(s->sh_size);
|
||||
mod->arch.bss_l2 = dest;
|
||||
if (dest == NULL) {
|
||||
printk(KERN_ERR
|
||||
"module %s: L2 SRAM allocation failed\n",
|
||||
mod->name);
|
||||
return -1;
|
||||
}
|
||||
memset(dest, 0, s->sh_size);
|
||||
s->sh_flags &= ~SHF_ALLOC;
|
||||
s->sh_addr = (unsigned long)dest;
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -411,9 +456,10 @@ module_finalize(const Elf_Ehdr * hdr,
|
|||
continue;
|
||||
|
||||
if ((sechdrs[i].sh_type == SHT_RELA) &&
|
||||
((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
|
||||
((strcmp(".rela.l2.text", secstrings + sechdrs[i].sh_name) == 0) ||
|
||||
(strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
|
||||
((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) &&
|
||||
(hdr->e_flags & FLG_CODE_IN_L1)))) {
|
||||
(hdr->e_flags & (EF_BFIN_CODE_IN_L1|EF_BFIN_CODE_IN_L2))))) {
|
||||
apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
|
||||
symindex, i, mod);
|
||||
}
|
||||
|
|
@ -423,14 +469,12 @@ module_finalize(const Elf_Ehdr * hdr,
|
|||
|
||||
void module_arch_cleanup(struct module *mod)
|
||||
{
|
||||
if (mod->arch.text_l1)
|
||||
l1_inst_sram_free((void *)mod->arch.text_l1);
|
||||
if (mod->arch.data_a_l1)
|
||||
l1_data_sram_free((void *)mod->arch.data_a_l1);
|
||||
if (mod->arch.bss_a_l1)
|
||||
l1_data_sram_free((void *)mod->arch.bss_a_l1);
|
||||
if (mod->arch.data_b_l1)
|
||||
l1_data_B_sram_free((void *)mod->arch.data_b_l1);
|
||||
if (mod->arch.bss_b_l1)
|
||||
l1_data_B_sram_free((void *)mod->arch.bss_b_l1);
|
||||
l1_inst_sram_free(mod->arch.text_l1);
|
||||
l1_data_A_sram_free(mod->arch.data_a_l1);
|
||||
l1_data_A_sram_free(mod->arch.bss_a_l1);
|
||||
l1_data_B_sram_free(mod->arch.data_b_l1);
|
||||
l1_data_B_sram_free(mod->arch.bss_b_l1);
|
||||
l2_sram_free(mod->arch.text_l2);
|
||||
l2_sram_free(mod->arch.data_l2);
|
||||
l2_sram_free(mod->arch.bss_l2);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -219,6 +219,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
|
|||
safe_dma_memcpy (&tmp, (const void *)(addr + add), sizeof(tmp));
|
||||
copied = sizeof(tmp);
|
||||
} else
|
||||
#endif
|
||||
#if L1_DATA_A_LENGTH != 0
|
||||
if (addr + add >= L1_DATA_A_START
|
||||
&& addr + add + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
|
||||
memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
|
||||
copied = sizeof(tmp);
|
||||
} else
|
||||
#endif
|
||||
#if L1_DATA_B_LENGTH != 0
|
||||
if (addr + add >= L1_DATA_B_START
|
||||
&& addr + add + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
|
||||
memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
|
||||
copied = sizeof(tmp);
|
||||
} else
|
||||
#endif
|
||||
if (addr + add >= FIXED_CODE_START
|
||||
&& addr + add + sizeof(tmp) <= FIXED_CODE_END) {
|
||||
|
|
@ -289,6 +303,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
|
|||
safe_dma_memcpy ((void *)(addr + add), &data, sizeof(data));
|
||||
copied = sizeof(data);
|
||||
} else
|
||||
#endif
|
||||
#if L1_DATA_A_LENGTH != 0
|
||||
if (addr + add >= L1_DATA_A_START
|
||||
&& addr + add + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
|
||||
memcpy((void *)(addr + add), &data, sizeof(data));
|
||||
copied = sizeof(data);
|
||||
} else
|
||||
#endif
|
||||
#if L1_DATA_B_LENGTH != 0
|
||||
if (addr + add >= L1_DATA_B_START
|
||||
&& addr + add + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
|
||||
memcpy((void *)(addr + add), &data, sizeof(data));
|
||||
copied = sizeof(data);
|
||||
} else
|
||||
#endif
|
||||
if (addr + add >= FIXED_CODE_START
|
||||
&& addr + add + sizeof(data) <= FIXED_CODE_END) {
|
||||
|
|
|
|||
|
|
@ -104,6 +104,7 @@ void __init bf53x_relocate_l1_mem(void)
|
|||
unsigned long l1_code_length;
|
||||
unsigned long l1_data_a_length;
|
||||
unsigned long l1_data_b_length;
|
||||
unsigned long l2_length;
|
||||
|
||||
l1_code_length = _etext_l1 - _stext_l1;
|
||||
if (l1_code_length > L1_CODE_LENGTH)
|
||||
|
|
@ -129,6 +130,15 @@ void __init bf53x_relocate_l1_mem(void)
|
|||
/* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */
|
||||
dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
|
||||
l1_data_a_length, l1_data_b_length);
|
||||
|
||||
#ifdef L2_LENGTH
|
||||
l2_length = _ebss_l2 - _stext_l2;
|
||||
if (l2_length > L2_LENGTH)
|
||||
panic("L2 SRAM Overflow\n");
|
||||
|
||||
/* Copy _stext_l2 to _edata_l2 to L2 SRAM */
|
||||
dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
|
||||
#endif
|
||||
}
|
||||
|
||||
/* add_memory_region to memmap */
|
||||
|
|
@ -664,9 +674,6 @@ static __init void setup_bootmem_allocator(void)
|
|||
})
|
||||
static inline int __init get_mem_size(void)
|
||||
{
|
||||
#ifdef CONFIG_MEM_SIZE
|
||||
return CONFIG_MEM_SIZE;
|
||||
#else
|
||||
#if defined(EBIU_SDBCTL)
|
||||
# if defined(BF561_FAMILY)
|
||||
int ret = 0;
|
||||
|
|
@ -693,8 +700,9 @@ static inline int __init get_mem_size(void)
|
|||
case DEVWD_8: ret *= 2;
|
||||
case DEVWD_16: break;
|
||||
}
|
||||
if ((ddrctl & 0xc000) == 0x4000)
|
||||
ret *= 2;
|
||||
return ret;
|
||||
# endif
|
||||
#endif
|
||||
BUG();
|
||||
}
|
||||
|
|
@ -763,6 +771,9 @@ void __init setup_arch(char **cmdline_p)
|
|||
|
||||
_bfin_swrst = bfin_read_SWRST();
|
||||
|
||||
/* If we double fault, reset the system - otherwise we hang forever */
|
||||
bfin_write_SWRST(DOUBLE_FAULT);
|
||||
|
||||
if (_bfin_swrst & RESET_DOUBLE)
|
||||
printk(KERN_INFO "Recovering from Double Fault event\n");
|
||||
else if (_bfin_swrst & RESET_WDOG)
|
||||
|
|
@ -842,38 +853,55 @@ static int __init topology_init(void)
|
|||
|
||||
subsys_initcall(topology_init);
|
||||
|
||||
/* Get the voltage input multiplier */
|
||||
static u_long cached_vco_pll_ctl, cached_vco;
|
||||
static u_long get_vco(void)
|
||||
{
|
||||
u_long msel;
|
||||
u_long vco;
|
||||
|
||||
msel = (bfin_read_PLL_CTL() >> 9) & 0x3F;
|
||||
u_long pll_ctl = bfin_read_PLL_CTL();
|
||||
if (pll_ctl == cached_vco_pll_ctl)
|
||||
return cached_vco;
|
||||
else
|
||||
cached_vco_pll_ctl = pll_ctl;
|
||||
|
||||
msel = (pll_ctl >> 9) & 0x3F;
|
||||
if (0 == msel)
|
||||
msel = 64;
|
||||
|
||||
vco = CONFIG_CLKIN_HZ;
|
||||
vco >>= (1 & bfin_read_PLL_CTL()); /* DF bit */
|
||||
vco = msel * vco;
|
||||
return vco;
|
||||
cached_vco = CONFIG_CLKIN_HZ;
|
||||
cached_vco >>= (1 & pll_ctl); /* DF bit */
|
||||
cached_vco *= msel;
|
||||
return cached_vco;
|
||||
}
|
||||
|
||||
/* Get the Core clock */
|
||||
static u_long cached_cclk_pll_div, cached_cclk;
|
||||
u_long get_cclk(void)
|
||||
{
|
||||
u_long csel, ssel;
|
||||
|
||||
if (bfin_read_PLL_STAT() & 0x1)
|
||||
return CONFIG_CLKIN_HZ;
|
||||
|
||||
ssel = bfin_read_PLL_DIV();
|
||||
if (ssel == cached_cclk_pll_div)
|
||||
return cached_cclk;
|
||||
else
|
||||
cached_cclk_pll_div = ssel;
|
||||
|
||||
csel = ((ssel >> 4) & 0x03);
|
||||
ssel &= 0xf;
|
||||
if (ssel && ssel < (1 << csel)) /* SCLK > CCLK */
|
||||
return get_vco() / ssel;
|
||||
return get_vco() >> csel;
|
||||
cached_cclk = get_vco() / ssel;
|
||||
else
|
||||
cached_cclk = get_vco() >> csel;
|
||||
return cached_cclk;
|
||||
}
|
||||
EXPORT_SYMBOL(get_cclk);
|
||||
|
||||
/* Get the System clock */
|
||||
static u_long cached_sclk_pll_div, cached_sclk;
|
||||
u_long get_sclk(void)
|
||||
{
|
||||
u_long ssel;
|
||||
|
|
@ -881,13 +909,20 @@ u_long get_sclk(void)
|
|||
if (bfin_read_PLL_STAT() & 0x1)
|
||||
return CONFIG_CLKIN_HZ;
|
||||
|
||||
ssel = (bfin_read_PLL_DIV() & 0xf);
|
||||
ssel = bfin_read_PLL_DIV();
|
||||
if (ssel == cached_sclk_pll_div)
|
||||
return cached_sclk;
|
||||
else
|
||||
cached_sclk_pll_div = ssel;
|
||||
|
||||
ssel &= 0xf;
|
||||
if (0 == ssel) {
|
||||
printk(KERN_WARNING "Invalid System Clock\n");
|
||||
ssel = 1;
|
||||
}
|
||||
|
||||
return get_vco() / ssel;
|
||||
cached_sclk = get_vco() / ssel;
|
||||
return cached_sclk;
|
||||
}
|
||||
EXPORT_SYMBOL(get_sclk);
|
||||
|
||||
|
|
@ -916,7 +951,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
|
|||
uint32_t revid;
|
||||
|
||||
u_long cclk = 0, sclk = 0;
|
||||
u_int dcache_size = 0, dsup_banks = 0;
|
||||
u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0;
|
||||
|
||||
cpu = CPU;
|
||||
mmu = "none";
|
||||
|
|
@ -985,12 +1020,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
|
|||
}
|
||||
|
||||
/* Is it turned on? */
|
||||
if (!((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE)))
|
||||
if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
|
||||
dcache_size = 0;
|
||||
|
||||
if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) == (IMC | ENICPLB))
|
||||
icache_size = 0;
|
||||
|
||||
seq_printf(m, "cache size\t: %d KB(L1 icache) "
|
||||
"%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
|
||||
BFIN_ICACHESIZE / 1024, dcache_size,
|
||||
icache_size, dcache_size,
|
||||
#if defined CONFIG_BFIN_WB
|
||||
"wb"
|
||||
#elif defined CONFIG_BFIN_WT
|
||||
|
|
@ -1000,8 +1038,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
|
|||
|
||||
seq_printf(m, "%s\n", cache);
|
||||
|
||||
if (icache_size)
|
||||
seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
|
||||
BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
|
||||
else
|
||||
seq_printf(m, "icache setup\t: off\n");
|
||||
|
||||
seq_printf(m,
|
||||
"dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
|
||||
dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
|
||||
|
|
|
|||
|
|
@ -69,8 +69,6 @@ void __init trap_init(void)
|
|||
|
||||
unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
|
||||
|
||||
int kstack_depth_to_print = 48;
|
||||
|
||||
static void decode_address(char *buf, unsigned long address)
|
||||
{
|
||||
struct vm_list_struct *vml;
|
||||
|
|
@ -163,6 +161,9 @@ static void decode_address(char *buf, unsigned long address)
|
|||
if (!in_atomic)
|
||||
mmput(mm);
|
||||
|
||||
if (!strlen(buf))
|
||||
sprintf(buf, "<0x%p> [ %s ] dynamic memory", (void *)address, name);
|
||||
|
||||
goto done;
|
||||
}
|
||||
|
||||
|
|
@ -173,7 +174,7 @@ static void decode_address(char *buf, unsigned long address)
|
|||
}
|
||||
|
||||
/* we were unable to find this address anywhere */
|
||||
sprintf(buf, "<0x%p> /* unknown address */", (void *)address);
|
||||
sprintf(buf, "<0x%p> /* kernel dynamic memory */", (void *)address);
|
||||
|
||||
done:
|
||||
write_unlock_irqrestore(&tasklist_lock, flags);
|
||||
|
|
@ -494,7 +495,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
BUG_ON(sig == 0);
|
||||
|
||||
if (sig != SIGTRAP) {
|
||||
unsigned long stack;
|
||||
unsigned long *stack;
|
||||
dump_bfin_process(fp);
|
||||
dump_bfin_mem(fp);
|
||||
show_regs(fp);
|
||||
|
|
@ -508,14 +509,23 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
else
|
||||
#endif
|
||||
dump_bfin_trace_buffer();
|
||||
show_stack(current, &stack);
|
||||
|
||||
if (oops_in_progress) {
|
||||
/* Dump the current kernel stack */
|
||||
printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
|
||||
show_stack(current, NULL);
|
||||
|
||||
print_modules();
|
||||
#ifndef CONFIG_ACCESS_CHECK
|
||||
printk(KERN_EMERG "Please turn on "
|
||||
"CONFIG_ACCESS_CHECK\n");
|
||||
#endif
|
||||
panic("Kernel exception");
|
||||
} else {
|
||||
/* Dump the user space stack */
|
||||
stack = (unsigned long *)rdusp();
|
||||
printk(KERN_NOTICE "Userspace Stack\n");
|
||||
show_stack(NULL, stack);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -532,11 +542,71 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
|
||||
#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
|
||||
|
||||
/*
|
||||
* Similar to get_user, do some address checking, then dereference
|
||||
* Return true on sucess, false on bad address
|
||||
*/
|
||||
bool get_instruction(unsigned short *val, unsigned short *address)
|
||||
{
|
||||
|
||||
unsigned long addr;
|
||||
|
||||
addr = (unsigned long)address;
|
||||
|
||||
/* Check for odd addresses */
|
||||
if (addr & 0x1)
|
||||
return false;
|
||||
|
||||
/* Check that things do not wrap around */
|
||||
if (addr > (addr + 2))
|
||||
return false;
|
||||
|
||||
/*
|
||||
* Since we are in exception context, we need to do a little address checking
|
||||
* We need to make sure we are only accessing valid memory, and
|
||||
* we don't read something in the async space that can hang forever
|
||||
*/
|
||||
if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) ||
|
||||
#ifdef L2_START
|
||||
(addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) ||
|
||||
#endif
|
||||
(addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) ||
|
||||
#if L1_DATA_A_LENGTH != 0
|
||||
(addr >= L1_DATA_A_START && (addr + 2) <= (L1_DATA_A_START + L1_DATA_A_LENGTH)) ||
|
||||
#endif
|
||||
#if L1_DATA_B_LENGTH != 0
|
||||
(addr >= L1_DATA_B_START && (addr + 2) <= (L1_DATA_B_START + L1_DATA_B_LENGTH)) ||
|
||||
#endif
|
||||
(addr >= L1_SCRATCH_START && (addr + 2) <= (L1_SCRATCH_START + L1_SCRATCH_LENGTH)) ||
|
||||
(!(bfin_read_EBIU_AMBCTL0() & B0RDYEN) &&
|
||||
addr >= ASYNC_BANK0_BASE && (addr + 2) <= (ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)) ||
|
||||
(!(bfin_read_EBIU_AMBCTL0() & B1RDYEN) &&
|
||||
addr >= ASYNC_BANK1_BASE && (addr + 2) <= (ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)) ||
|
||||
(!(bfin_read_EBIU_AMBCTL1() & B2RDYEN) &&
|
||||
addr >= ASYNC_BANK2_BASE && (addr + 2) <= (ASYNC_BANK2_BASE + ASYNC_BANK1_SIZE)) ||
|
||||
(!(bfin_read_EBIU_AMBCTL1() & B3RDYEN) &&
|
||||
addr >= ASYNC_BANK3_BASE && (addr + 2) <= (ASYNC_BANK3_BASE + ASYNC_BANK1_SIZE))) {
|
||||
*val = *address;
|
||||
return true;
|
||||
}
|
||||
|
||||
#if L1_CODE_LENGTH != 0
|
||||
if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) {
|
||||
dma_memcpy(val, address, 2);
|
||||
return true;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
void dump_bfin_trace_buffer(void)
|
||||
{
|
||||
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
|
||||
int tflags, i = 0;
|
||||
char buf[150];
|
||||
unsigned short val = 0, *addr;
|
||||
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
|
||||
int j, index;
|
||||
#endif
|
||||
|
|
@ -549,8 +619,42 @@ void dump_bfin_trace_buffer(void)
|
|||
for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
|
||||
decode_address(buf, (unsigned long)bfin_read_TBUF());
|
||||
printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
|
||||
decode_address(buf, (unsigned long)bfin_read_TBUF());
|
||||
printk(KERN_NOTICE " Source : %s\n", buf);
|
||||
addr = (unsigned short *)bfin_read_TBUF();
|
||||
decode_address(buf, (unsigned long)addr);
|
||||
printk(KERN_NOTICE " Source : %s ", buf);
|
||||
if (get_instruction(&val, addr)) {
|
||||
if (val == 0x0010)
|
||||
printk("RTS");
|
||||
else if (val == 0x0011)
|
||||
printk("RTI");
|
||||
else if (val == 0x0012)
|
||||
printk("RTX");
|
||||
else if (val >= 0x0050 && val <= 0x0057)
|
||||
printk("JUMP (P%i)", val & 7);
|
||||
else if (val >= 0x0060 && val <= 0x0067)
|
||||
printk("CALL (P%i)", val & 7);
|
||||
else if (val >= 0x0070 && val <= 0x0077)
|
||||
printk("CALL (PC+P%i)", val & 7);
|
||||
else if (val >= 0x0080 && val <= 0x0087)
|
||||
printk("JUMP (PC+P%i)", val & 7);
|
||||
else if ((val >= 0x1000 && val <= 0x13FF) ||
|
||||
(val >= 0x1800 && val <= 0x1BFF))
|
||||
printk("IF !CC JUMP");
|
||||
else if ((val >= 0x1400 && val <= 0x17ff) ||
|
||||
(val >= 0x1c00 && val <= 0x1fff))
|
||||
printk("IF CC JUMP");
|
||||
else if (val >= 0x2000 && val <= 0x2fff)
|
||||
printk("JUMP.S");
|
||||
else if (val >= 0xe080 && val <= 0xe0ff)
|
||||
printk("LSETUP");
|
||||
else if (val >= 0xe200 && val <= 0xe2ff)
|
||||
printk("JUMP.L");
|
||||
else if (val >= 0xe300 && val <= 0xe3ff)
|
||||
printk("CALL pcrel");
|
||||
else
|
||||
printk("0x%04x", val);
|
||||
}
|
||||
printk("\n");
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -582,59 +686,151 @@ void dump_bfin_trace_buffer(void)
|
|||
}
|
||||
EXPORT_SYMBOL(dump_bfin_trace_buffer);
|
||||
|
||||
static void show_trace(struct task_struct *tsk, unsigned long *sp)
|
||||
{
|
||||
unsigned long addr;
|
||||
|
||||
printk(KERN_NOTICE "\n" KERN_NOTICE "Call Trace:\n");
|
||||
|
||||
while (!kstack_end(sp)) {
|
||||
addr = *sp++;
|
||||
/*
|
||||
* If the address is either in the text segment of the
|
||||
* kernel, or in the region which contains vmalloc'ed
|
||||
* memory, it *may* be the address of a calling
|
||||
* routine; if so, print it so that someone tracing
|
||||
* down the cause of the crash will be able to figure
|
||||
* out the call path that was taken.
|
||||
* Checks to see if the address pointed to is either a
|
||||
* 16-bit CALL instruction, or a 32-bit CALL instruction
|
||||
*/
|
||||
if (kernel_text_address(addr))
|
||||
print_ip_sym(addr);
|
||||
}
|
||||
bool is_bfin_call(unsigned short *addr)
|
||||
{
|
||||
unsigned short opcode = 0, *ins_addr;
|
||||
ins_addr = (unsigned short *)addr;
|
||||
|
||||
printk(KERN_NOTICE "\n");
|
||||
}
|
||||
if (!get_instruction(&opcode, ins_addr))
|
||||
return false;
|
||||
|
||||
if ((opcode >= 0x0060 && opcode <= 0x0067) ||
|
||||
(opcode >= 0x0070 && opcode <= 0x0077))
|
||||
return true;
|
||||
|
||||
ins_addr--;
|
||||
if (!get_instruction(&opcode, ins_addr))
|
||||
return false;
|
||||
|
||||
if (opcode >= 0xE300 && opcode <= 0xE3FF)
|
||||
return true;
|
||||
|
||||
return false;
|
||||
|
||||
}
|
||||
void show_stack(struct task_struct *task, unsigned long *stack)
|
||||
{
|
||||
unsigned long *endstack, addr;
|
||||
int i;
|
||||
unsigned int *addr, *endstack, *fp = 0, *frame;
|
||||
unsigned short *ins_addr;
|
||||
char buf[150];
|
||||
unsigned int i, j, ret_addr, frame_no = 0;
|
||||
|
||||
/* Cannot call dump_bfin_trace_buffer() here as show_stack() is
|
||||
* called externally in some places in the kernel.
|
||||
/*
|
||||
* If we have been passed a specific stack, use that one otherwise
|
||||
* if we have been passed a task structure, use that, otherwise
|
||||
* use the stack of where the variable "stack" exists
|
||||
*/
|
||||
|
||||
if (!stack) {
|
||||
if (task)
|
||||
if (stack == NULL) {
|
||||
if (task) {
|
||||
/* We know this is a kernel stack, so this is the start/end */
|
||||
stack = (unsigned long *)task->thread.ksp;
|
||||
else
|
||||
endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
|
||||
} else {
|
||||
/* print out the existing stack info */
|
||||
stack = (unsigned long *)&stack;
|
||||
endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
|
||||
}
|
||||
} else
|
||||
endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
|
||||
|
||||
addr = (unsigned long)stack;
|
||||
endstack = (unsigned long *)PAGE_ALIGN(addr);
|
||||
decode_address(buf, (unsigned int)stack);
|
||||
printk(KERN_NOTICE "Stack info:\n" KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
|
||||
addr = (unsigned int *)((unsigned int)stack & ~0x3F);
|
||||
|
||||
printk(KERN_NOTICE "Stack from %08lx:", (unsigned long)stack);
|
||||
for (i = 0; i < kstack_depth_to_print; i++) {
|
||||
if (stack + 1 > endstack)
|
||||
/* First thing is to look for a frame pointer */
|
||||
for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
|
||||
addr < endstack; addr++, i++) {
|
||||
if (*addr & 0x1)
|
||||
continue;
|
||||
ins_addr = (unsigned short *)*addr;
|
||||
ins_addr--;
|
||||
if (is_bfin_call(ins_addr))
|
||||
fp = addr - 1;
|
||||
|
||||
if (fp) {
|
||||
/* Let's check to see if it is a frame pointer */
|
||||
while (fp >= (addr - 1) && fp < endstack && fp)
|
||||
fp = (unsigned int *)*fp;
|
||||
if (fp == 0 || fp == endstack) {
|
||||
fp = addr - 1;
|
||||
break;
|
||||
if (i % 8 == 0)
|
||||
printk("\n" KERN_NOTICE " ");
|
||||
printk(" %08lx", *stack++);
|
||||
}
|
||||
printk("\n");
|
||||
fp = 0;
|
||||
}
|
||||
}
|
||||
if (fp) {
|
||||
frame = fp;
|
||||
printk(" FP: (0x%p)\n", fp);
|
||||
} else
|
||||
frame = 0;
|
||||
|
||||
/*
|
||||
* Now that we think we know where things are, we
|
||||
* walk the stack again, this time printing things out
|
||||
* incase there is no frame pointer, we still look for
|
||||
* valid return addresses
|
||||
*/
|
||||
|
||||
/* First time print out data, next time, print out symbols */
|
||||
for (j = 0; j <= 1; j++) {
|
||||
if (j)
|
||||
printk(KERN_NOTICE "Return addresses in stack:\n");
|
||||
else
|
||||
printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
|
||||
|
||||
fp = frame;
|
||||
frame_no = 0;
|
||||
|
||||
for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
|
||||
addr <= endstack; addr++, i++) {
|
||||
|
||||
ret_addr = 0;
|
||||
if (!j && i % 8 == 0)
|
||||
printk("\n" KERN_NOTICE "%p:",addr);
|
||||
|
||||
/* if it is an odd address, or zero, just skip it */
|
||||
if (*addr & 0x1 || !*addr)
|
||||
goto print;
|
||||
|
||||
ins_addr = (unsigned short *)*addr;
|
||||
|
||||
/* Go back one instruction, and see if it is a CALL */
|
||||
ins_addr--;
|
||||
ret_addr = is_bfin_call(ins_addr);
|
||||
print:
|
||||
if (!j && stack == (unsigned long *)addr)
|
||||
printk("[%08x]", *addr);
|
||||
else if (ret_addr)
|
||||
if (j) {
|
||||
decode_address(buf, (unsigned int)*addr);
|
||||
if (frame == addr) {
|
||||
printk(KERN_NOTICE " frame %2i : %s\n", frame_no, buf);
|
||||
continue;
|
||||
}
|
||||
printk(KERN_NOTICE " address : %s\n", buf);
|
||||
} else
|
||||
printk("<%08x>", *addr);
|
||||
else if (fp == addr) {
|
||||
if (j)
|
||||
frame = addr+1;
|
||||
else
|
||||
printk("(%08x)", *addr);
|
||||
|
||||
fp = (unsigned int *)*addr;
|
||||
frame_no++;
|
||||
|
||||
} else if (!j)
|
||||
printk(" %08x ", *addr);
|
||||
}
|
||||
if (!j)
|
||||
printk("\n");
|
||||
}
|
||||
|
||||
show_trace(task, stack);
|
||||
}
|
||||
|
||||
void dump_stack(void)
|
||||
|
|
@ -715,19 +911,9 @@ void dump_bfin_mem(struct pt_regs *fp)
|
|||
if (!((unsigned long)addr & 0xF))
|
||||
printk("\n" KERN_NOTICE "0x%p: ", addr);
|
||||
|
||||
if (get_user(val, addr)) {
|
||||
if (addr >= (unsigned short *)L1_CODE_START &&
|
||||
addr < (unsigned short *)(L1_CODE_START + L1_CODE_LENGTH)) {
|
||||
dma_memcpy(&val, addr, sizeof(val));
|
||||
sprintf(buf, "%04x", val);
|
||||
} else if (addr >= (unsigned short *)FIXED_CODE_START &&
|
||||
addr <= (unsigned short *)memory_start) {
|
||||
val = bfin_read16(addr);
|
||||
sprintf(buf, "%04x", val);
|
||||
} else {
|
||||
if (get_instruction(&val, addr)) {
|
||||
val = 0;
|
||||
sprintf(buf, "????");
|
||||
}
|
||||
} else
|
||||
sprintf(buf, "%04x", val);
|
||||
|
||||
|
|
|
|||
|
|
@ -101,6 +101,11 @@ SECTIONS
|
|||
#if !L1_DATA_B_LENGTH
|
||||
*(.l1.data.B)
|
||||
#endif
|
||||
#ifndef L2_LENGTH
|
||||
. = ALIGN(32);
|
||||
*(.data_l2.cacheline_aligned)
|
||||
*(.l2.data)
|
||||
#endif
|
||||
|
||||
DATA_DATA
|
||||
*(.data.*)
|
||||
|
|
@ -182,13 +187,12 @@ SECTIONS
|
|||
*(.l1.data)
|
||||
__edata_l1 = .;
|
||||
|
||||
. = ALIGN(4);
|
||||
__sbss_l1 = .;
|
||||
*(.l1.bss)
|
||||
|
||||
. = ALIGN(32);
|
||||
*(.data_l1.cacheline_aligned)
|
||||
|
||||
. = ALIGN(4);
|
||||
__sbss_l1 = .;
|
||||
*(.l1.bss)
|
||||
. = ALIGN(4);
|
||||
__ebss_l1 = .;
|
||||
}
|
||||
|
|
@ -203,11 +207,37 @@ SECTIONS
|
|||
. = ALIGN(4);
|
||||
__sbss_b_l1 = .;
|
||||
*(.l1.bss.B)
|
||||
|
||||
. = ALIGN(4);
|
||||
__ebss_b_l1 = .;
|
||||
}
|
||||
|
||||
#ifdef L2_LENGTH
|
||||
__l2_lma_start = .;
|
||||
|
||||
.text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1))
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__stext_l2 = .;
|
||||
*(.l1.text)
|
||||
. = ALIGN(4);
|
||||
__etext_l2 = .;
|
||||
|
||||
. = ALIGN(4);
|
||||
__sdata_l2 = .;
|
||||
*(.l1.data)
|
||||
__edata_l2 = .;
|
||||
|
||||
. = ALIGN(32);
|
||||
*(.data_l2.cacheline_aligned)
|
||||
|
||||
. = ALIGN(4);
|
||||
__sbss_l2 = .;
|
||||
*(.l1.bss)
|
||||
. = ALIGN(4);
|
||||
__ebss_l2 = .;
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Force trailing alignment of our init section so that when we
|
||||
* free our init memory, we don't leave behind a partial page.
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -9,4 +9,9 @@ config BFIN527_EZKIT
|
|||
help
|
||||
BF527-EZKIT-LITE board support.
|
||||
|
||||
config BFIN527_BLUETECHNIX_CM
|
||||
bool "Bluetechnix CM-BF527"
|
||||
help
|
||||
CM-BF527 support for EVAL- and DEV-Board.
|
||||
|
||||
endchoice
|
||||
|
|
|
|||
|
|
@ -3,3 +3,4 @@
|
|||
#
|
||||
|
||||
obj-$(CONFIG_BFIN527_EZKIT) += ezkit.o
|
||||
obj-$(CONFIG_BFIN527_BLUETECHNIX_CM) += cm_bf527.o
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
|
|
@ -32,7 +32,7 @@
|
|||
#include <asm/blackfin.h>
|
||||
#include <asm/trace.h>
|
||||
|
||||
#if CONFIG_BFIN_KERNEL_CLOCK
|
||||
#ifdef CONFIG_BFIN_KERNEL_CLOCK
|
||||
#include <asm/mach-common/clocks.h>
|
||||
#include <asm/mach/mem_init.h>
|
||||
#endif
|
||||
|
|
@ -185,7 +185,7 @@ ENTRY(__start)
|
|||
|
||||
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
|
||||
call _bf53x_relocate_l1_mem;
|
||||
#if CONFIG_BFIN_KERNEL_CLOCK
|
||||
#ifdef CONFIG_BFIN_KERNEL_CLOCK
|
||||
call _start_dma_code;
|
||||
#endif
|
||||
|
||||
|
|
@ -318,7 +318,7 @@ ENDPROC(_real_start)
|
|||
__FINIT
|
||||
|
||||
.section .l1.text
|
||||
#if CONFIG_BFIN_KERNEL_CLOCK
|
||||
#ifdef CONFIG_BFIN_KERNEL_CLOCK
|
||||
ENTRY(_start_dma_code)
|
||||
|
||||
/* Enable PHY CLK buffer output */
|
||||
|
|
@ -398,12 +398,6 @@ ENTRY(_start_dma_code)
|
|||
w[p0] = r0.l;
|
||||
ssync;
|
||||
|
||||
p0.l = LO(EBIU_SDBCTL);
|
||||
p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
|
||||
r0 = mem_SDBCTL;
|
||||
w[p0] = r0.l;
|
||||
ssync;
|
||||
|
||||
P2.H = hi(EBIU_SDGCTL);
|
||||
P2.L = lo(EBIU_SDGCTL);
|
||||
R0 = [P2];
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@
|
|||
#include <linux/init.h>
|
||||
#include <asm/blackfin.h>
|
||||
#include <asm/trace.h>
|
||||
#if CONFIG_BFIN_KERNEL_CLOCK
|
||||
#ifdef CONFIG_BFIN_KERNEL_CLOCK
|
||||
#include <asm/mach-common/clocks.h>
|
||||
#include <asm/mach/mem_init.h>
|
||||
#endif
|
||||
|
|
@ -186,7 +186,7 @@ ENTRY(__start)
|
|||
|
||||
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
|
||||
call _bf53x_relocate_l1_mem;
|
||||
#if CONFIG_BFIN_KERNEL_CLOCK
|
||||
#ifdef CONFIG_BFIN_KERNEL_CLOCK
|
||||
call _start_dma_code;
|
||||
#endif
|
||||
|
||||
|
|
@ -319,7 +319,7 @@ ENDPROC(_real_start)
|
|||
__FINIT
|
||||
|
||||
.section .l1.text
|
||||
#if CONFIG_BFIN_KERNEL_CLOCK
|
||||
#ifdef CONFIG_BFIN_KERNEL_CLOCK
|
||||
ENTRY(_start_dma_code)
|
||||
p0.h = hi(SIC_IWR);
|
||||
p0.l = lo(SIC_IWR);
|
||||
|
|
@ -390,12 +390,6 @@ ENTRY(_start_dma_code)
|
|||
w[p0] = r0.l;
|
||||
ssync;
|
||||
|
||||
p0.l = LO(EBIU_SDBCTL);
|
||||
p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
|
||||
r0 = mem_SDBCTL;
|
||||
w[p0] = r0.l;
|
||||
ssync;
|
||||
|
||||
P2.H = hi(EBIU_SDGCTL);
|
||||
P2.L = lo(EBIU_SDGCTL);
|
||||
R0 = [P2];
|
||||
|
|
|
|||
|
|
@ -29,9 +29,12 @@
|
|||
*/
|
||||
|
||||
#include <linux/device.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/mtd/plat-ram.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/flash.h>
|
||||
|
|
@ -355,6 +358,84 @@ static struct platform_device net2272_bfin_device = {
|
|||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
|
||||
|
||||
static struct mtd_partition bfin_plat_nand_partitions[] = {
|
||||
{
|
||||
.name = "linux kernel",
|
||||
.size = 0x400000,
|
||||
.offset = 0,
|
||||
}, {
|
||||
.name = "file system",
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
},
|
||||
};
|
||||
#endif
|
||||
|
||||
#define BFIN_NAND_PLAT_CLE 2
|
||||
#define BFIN_NAND_PLAT_ALE 1
|
||||
static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
||||
{
|
||||
struct nand_chip *this = mtd->priv;
|
||||
|
||||
if (cmd == NAND_CMD_NONE)
|
||||
return;
|
||||
|
||||
if (ctrl & NAND_CLE)
|
||||
writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
|
||||
else
|
||||
writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
|
||||
}
|
||||
|
||||
#define BFIN_NAND_PLAT_READY GPIO_PF3
|
||||
static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
|
||||
{
|
||||
return gpio_get_value(BFIN_NAND_PLAT_READY);
|
||||
}
|
||||
|
||||
static struct platform_nand_data bfin_plat_nand_data = {
|
||||
.chip = {
|
||||
.chip_delay = 30,
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
.part_probe_types = part_probes,
|
||||
.partitions = bfin_plat_nand_partitions,
|
||||
.nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
|
||||
#endif
|
||||
},
|
||||
.ctrl = {
|
||||
.cmd_ctrl = bfin_plat_nand_cmd_ctrl,
|
||||
.dev_ready = bfin_plat_nand_dev_ready,
|
||||
},
|
||||
};
|
||||
|
||||
#define MAX(x, y) (x > y ? x : y)
|
||||
static struct resource bfin_plat_nand_resources = {
|
||||
.start = 0x20212000,
|
||||
.end = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
|
||||
.flags = IORESOURCE_IO,
|
||||
};
|
||||
|
||||
static struct platform_device bfin_async_nand_device = {
|
||||
.name = "gen_nand",
|
||||
.id = -1,
|
||||
.num_resources = 1,
|
||||
.resource = &bfin_plat_nand_resources,
|
||||
.dev = {
|
||||
.platform_data = &bfin_plat_nand_data,
|
||||
},
|
||||
};
|
||||
|
||||
static void bfin_plat_nand_init(void)
|
||||
{
|
||||
gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
|
||||
}
|
||||
#else
|
||||
static void bfin_plat_nand_init(void) {}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
|
||||
static struct mtd_partition stamp_partitions[] = {
|
||||
{
|
||||
|
|
@ -780,7 +861,7 @@ static struct platform_device bfin_sport1_uart_device = {
|
|||
#endif
|
||||
|
||||
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
|
||||
#define PATA_INT 55
|
||||
#define PATA_INT IRQ_PF5
|
||||
|
||||
static struct pata_platform_info bfin_pata_platform_data = {
|
||||
.ioport_shift = 1,
|
||||
|
|
@ -922,6 +1003,10 @@ static struct platform_device *stamp_devices[] __initdata = {
|
|||
|
||||
&bfin_gpios_device,
|
||||
|
||||
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
|
||||
&bfin_async_nand_device,
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
|
||||
&stamp_flash_device,
|
||||
#endif
|
||||
|
|
@ -936,6 +1021,7 @@ static int __init stamp_init(void)
|
|||
ARRAY_SIZE(bfin_i2c_board_info));
|
||||
#endif
|
||||
|
||||
bfin_plat_nand_init();
|
||||
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
|
||||
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
|
||||
|
||||
|
|
|
|||
|
|
@ -32,7 +32,7 @@
|
|||
#include <asm/blackfin.h>
|
||||
#include <asm/trace.h>
|
||||
|
||||
#if CONFIG_BFIN_KERNEL_CLOCK
|
||||
#ifdef CONFIG_BFIN_KERNEL_CLOCK
|
||||
#include <asm/mach-common/clocks.h>
|
||||
#include <asm/mach/mem_init.h>
|
||||
#endif
|
||||
|
|
@ -217,7 +217,7 @@ ENTRY(__start)
|
|||
|
||||
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
|
||||
call _bf53x_relocate_l1_mem;
|
||||
#if CONFIG_BFIN_KERNEL_CLOCK
|
||||
#ifdef CONFIG_BFIN_KERNEL_CLOCK
|
||||
call _start_dma_code;
|
||||
#endif
|
||||
|
||||
|
|
@ -350,7 +350,7 @@ ENDPROC(_real_start)
|
|||
__FINIT
|
||||
|
||||
.section .l1.text
|
||||
#if CONFIG_BFIN_KERNEL_CLOCK
|
||||
#ifdef CONFIG_BFIN_KERNEL_CLOCK
|
||||
ENTRY(_start_dma_code)
|
||||
|
||||
/* Enable PHY CLK buffer output */
|
||||
|
|
@ -430,12 +430,6 @@ ENTRY(_start_dma_code)
|
|||
w[p0] = r0.l;
|
||||
ssync;
|
||||
|
||||
p0.l = LO(EBIU_SDBCTL);
|
||||
p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
|
||||
r0 = mem_SDBCTL;
|
||||
w[p0] = r0.l;
|
||||
ssync;
|
||||
|
||||
P2.H = hi(EBIU_SDGCTL);
|
||||
P2.L = lo(EBIU_SDGCTL);
|
||||
R0 = [P2];
|
||||
|
|
|
|||
|
|
@ -61,6 +61,49 @@ const char bfin_board_name[] = "ADSP-BF548-EZKIT";
|
|||
* Driver needs to know address, irq and flag pin.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
|
||||
static struct resource bfin_isp1761_resources[] = {
|
||||
[0] = {
|
||||
.name = "isp1761-regs",
|
||||
.start = 0x2C0C0000,
|
||||
.end = 0x2C0C0000 + 0xfffff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = IRQ_PG7,
|
||||
.end = IRQ_PG7,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device bfin_isp1761_device = {
|
||||
.name = "isp1761",
|
||||
.id = 0,
|
||||
.num_resources = ARRAY_SIZE(bfin_isp1761_resources),
|
||||
.resource = bfin_isp1761_resources,
|
||||
};
|
||||
|
||||
static struct platform_device *bfin_isp1761_devices[] = {
|
||||
&bfin_isp1761_device,
|
||||
};
|
||||
|
||||
int __init bfin_isp1761_init(void)
|
||||
{
|
||||
unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
|
||||
|
||||
printk(KERN_INFO "%s(): registering device resources\n", __func__);
|
||||
set_irq_type(bfin_isp1761_resources[1].start, IRQF_TRIGGER_FALLING);
|
||||
|
||||
return platform_add_devices(bfin_isp1761_devices, num_devices);
|
||||
}
|
||||
|
||||
void __exit bfin_isp1761_exit(void)
|
||||
{
|
||||
platform_device_unregister(&bfin_isp1761_device);
|
||||
}
|
||||
arch_initcall(bfin_isp1761_init);
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
|
||||
|
||||
#include <asm/mach/bf54x-lq043.h>
|
||||
|
|
@ -177,6 +220,7 @@ static struct resource bfin_uart_resources[] = {
|
|||
{
|
||||
.start = 0xFFC03100,
|
||||
.end = 0xFFC031FF,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
#endif
|
||||
};
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@
|
|||
#include <linux/init.h>
|
||||
#include <asm/blackfin.h>
|
||||
#include <asm/trace.h>
|
||||
#if CONFIG_BFIN_KERNEL_CLOCK
|
||||
#ifdef CONFIG_BFIN_KERNEL_CLOCK
|
||||
#include <asm/mach-common/clocks.h>
|
||||
#include <asm/mach/mem_init.h>
|
||||
#endif
|
||||
|
|
@ -130,7 +130,7 @@ ENTRY(__start)
|
|||
|
||||
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
|
||||
call _bf53x_relocate_l1_mem;
|
||||
#if CONFIG_BFIN_KERNEL_CLOCK
|
||||
#ifdef CONFIG_BFIN_KERNEL_CLOCK
|
||||
call _start_dma_code;
|
||||
#endif
|
||||
/* Code for initializing Async memory banks */
|
||||
|
|
@ -288,7 +288,7 @@ ENDPROC(_real_start)
|
|||
__FINIT
|
||||
|
||||
.section .l1.text
|
||||
#if CONFIG_BFIN_KERNEL_CLOCK
|
||||
#ifdef CONFIG_BFIN_KERNEL_CLOCK
|
||||
ENTRY(_start_dma_code)
|
||||
|
||||
/* Enable PHY CLK buffer output */
|
||||
|
|
|
|||
|
|
@ -377,12 +377,6 @@ ENTRY(_start_dma_code)
|
|||
w[p0] = r0.l;
|
||||
ssync;
|
||||
|
||||
p0.l = LO(EBIU_SDBCTL);
|
||||
p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
|
||||
r0 = mem_SDBCTL;
|
||||
w[p0] = r0.l;
|
||||
ssync;
|
||||
|
||||
P2.H = hi(EBIU_SDGCTL);
|
||||
P2.L = lo(EBIU_SDGCTL);
|
||||
R0 = [P2];
|
||||
|
|
|
|||
|
|
@ -53,9 +53,3 @@
|
|||
# endif
|
||||
|
||||
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
|
||||
|
||||
#ifdef CONFIG_MEM_SIZE
|
||||
#if (CONFIG_MEM_SIZE % 4)
|
||||
#error "SDRAM mem size must be multible of 4MB"
|
||||
#endif
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@
|
|||
#include <linux/linkage.h>
|
||||
#include <asm/blackfin.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <asm/dpmc.h>
|
||||
|
||||
.section .l1.text
|
||||
|
||||
|
|
@ -51,31 +51,32 @@ ENTRY(_sleep_mode)
|
|||
RETS = [SP++];
|
||||
( R7:0, P5:0 ) = [SP++];
|
||||
RTS;
|
||||
ENDPROC(_sleep_mode)
|
||||
|
||||
ENTRY(_hibernate_mode)
|
||||
[--SP] = ( R7:0, P5:0 );
|
||||
[--SP] = RETS;
|
||||
|
||||
R3 = R0;
|
||||
R0 = IWR_DISABLE_ALL;
|
||||
R1 = IWR_DISABLE_ALL;
|
||||
R2 = IWR_DISABLE_ALL;
|
||||
call _set_sic_iwr;
|
||||
call _set_dram_srfs;
|
||||
SSYNC;
|
||||
|
||||
R0 = 0xFFFF (Z);
|
||||
call _set_rtc_istat;
|
||||
|
||||
P0.H = hi(VR_CTL);
|
||||
P0.L = lo(VR_CTL);
|
||||
R1 = W[P0](z);
|
||||
BITSET (R1, 8);
|
||||
BITCLR (R1, 0);
|
||||
BITCLR (R1, 1);
|
||||
W[P0] = R1.L;
|
||||
SSYNC;
|
||||
|
||||
W[P0] = R3.L;
|
||||
CLI R2;
|
||||
IDLE;
|
||||
|
||||
/* Actually, adding anything may not be necessary...SDRAM contents
|
||||
* are lost
|
||||
*/
|
||||
.Lforever:
|
||||
jump .Lforever;
|
||||
ENDPROC(_hibernate_mode)
|
||||
|
||||
ENTRY(_deep_sleep)
|
||||
[--SP] = ( R7:0, P5:0 );
|
||||
|
|
@ -131,6 +132,7 @@ ENTRY(_deep_sleep)
|
|||
RETS = [SP++];
|
||||
( R7:0, P5:0 ) = [SP++];
|
||||
RTS;
|
||||
ENDPROC(_deep_sleep)
|
||||
|
||||
ENTRY(_sleep_deeper)
|
||||
[--SP] = ( R7:0, P5:0 );
|
||||
|
|
@ -232,53 +234,73 @@ ENTRY(_sleep_deeper)
|
|||
RETS = [SP++];
|
||||
( R7:0, P5:0 ) = [SP++];
|
||||
RTS;
|
||||
ENDPROC(_sleep_deeper)
|
||||
|
||||
ENTRY(_set_dram_srfs)
|
||||
/* set the dram to self refresh mode */
|
||||
#if defined(CONFIG_BF54x)
|
||||
SSYNC;
|
||||
#if defined(EBIU_RSTCTL) /* DDR */
|
||||
P0.H = hi(EBIU_RSTCTL);
|
||||
P0.L = lo(EBIU_RSTCTL);
|
||||
R2 = [P0];
|
||||
R3.H = hi(SRREQ);
|
||||
R3.L = lo(SRREQ);
|
||||
#else
|
||||
P0.H = hi(EBIU_SDGCTL);
|
||||
P0.L = lo(EBIU_SDGCTL);
|
||||
R2 = [P0];
|
||||
R3.H = hi(SRFS);
|
||||
R3.L = lo(SRFS);
|
||||
#endif
|
||||
R2 = R2|R3;
|
||||
BITSET(R2, 3); /* SRREQ enter self-refresh mode */
|
||||
[P0] = R2;
|
||||
ssync;
|
||||
#if defined(CONFIG_BF54x)
|
||||
.LSRR_MODE:
|
||||
SSYNC;
|
||||
1:
|
||||
R2 = [P0];
|
||||
CC = BITTST(R2, 4);
|
||||
if !CC JUMP .LSRR_MODE;
|
||||
if !CC JUMP 1b;
|
||||
#else /* SDRAM */
|
||||
P0.L = lo(EBIU_SDGCTL);
|
||||
P0.H = hi(EBIU_SDGCTL);
|
||||
R2 = [P0];
|
||||
BITSET(R2, 24); /* SRFS enter self-refresh mode */
|
||||
[P0] = R2;
|
||||
SSYNC;
|
||||
|
||||
P0.L = lo(EBIU_SDSTAT);
|
||||
P0.H = hi(EBIU_SDSTAT);
|
||||
1:
|
||||
R2 = w[P0];
|
||||
SSYNC;
|
||||
cc = BITTST(R2, 1); /* SDSRA poll self-refresh status */
|
||||
if !cc jump 1b;
|
||||
|
||||
P0.L = lo(EBIU_SDGCTL);
|
||||
P0.H = hi(EBIU_SDGCTL);
|
||||
R2 = [P0];
|
||||
BITCLR(R2, 0); /* SCTLE disable CLKOUT */
|
||||
[P0] = R2;
|
||||
#endif
|
||||
RTS;
|
||||
ENDPROC(_set_dram_srfs)
|
||||
|
||||
ENTRY(_unset_dram_srfs)
|
||||
/* set the dram out of self refresh mode */
|
||||
#if defined(CONFIG_BF54x)
|
||||
#if defined(EBIU_RSTCTL) /* DDR */
|
||||
P0.H = hi(EBIU_RSTCTL);
|
||||
P0.L = lo(EBIU_RSTCTL);
|
||||
R2 = [P0];
|
||||
R3.H = hi(SRREQ);
|
||||
R3.L = lo(SRREQ);
|
||||
#else
|
||||
P0.H = hi(EBIU_SDGCTL);
|
||||
P0.L = lo(EBIU_SDGCTL);
|
||||
R2 = [P0];
|
||||
R3.H = hi(SRFS);
|
||||
R3.L = lo(SRFS);
|
||||
#endif
|
||||
R3 = ~R3;
|
||||
R2 = R2&R3;
|
||||
BITCLR(R2, 3); /* clear SRREQ bit */
|
||||
[P0] = R2;
|
||||
ssync;
|
||||
#elif defined(EBIU_SDGCTL) /* SDRAM */
|
||||
|
||||
P0.L = lo(EBIU_SDGCTL); /* release CLKOUT from self-refresh */
|
||||
P0.H = hi(EBIU_SDGCTL);
|
||||
R2 = [P0];
|
||||
BITSET(R2, 0); /* SCTLE enable CLKOUT */
|
||||
[P0] = R2
|
||||
SSYNC;
|
||||
|
||||
P0.L = lo(EBIU_SDGCTL); /* release SDRAM from self-refresh */
|
||||
P0.H = hi(EBIU_SDGCTL);
|
||||
R2 = [P0];
|
||||
BITCLR(R2, 24); /* clear SRFS bit */
|
||||
[P0] = R2
|
||||
#endif
|
||||
SSYNC;
|
||||
RTS;
|
||||
ENDPROC(_unset_dram_srfs)
|
||||
|
||||
ENTRY(_set_sic_iwr)
|
||||
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
|
||||
|
|
@ -300,6 +322,7 @@ ENTRY(_set_sic_iwr)
|
|||
|
||||
SSYNC;
|
||||
RTS;
|
||||
ENDPROC(_set_sic_iwr)
|
||||
|
||||
ENTRY(_set_rtc_istat)
|
||||
#ifndef CONFIG_BF561
|
||||
|
|
@ -307,8 +330,14 @@ ENTRY(_set_rtc_istat)
|
|||
P0.L = lo(RTC_ISTAT);
|
||||
w[P0] = R0.L;
|
||||
SSYNC;
|
||||
#elif (ANOMALY_05000371)
|
||||
nop;
|
||||
nop;
|
||||
nop;
|
||||
nop;
|
||||
#endif
|
||||
RTS;
|
||||
ENDPROC(_set_rtc_istat)
|
||||
|
||||
ENTRY(_test_pll_locked)
|
||||
P0.H = hi(PLL_STAT);
|
||||
|
|
@ -318,3 +347,509 @@ ENTRY(_test_pll_locked)
|
|||
CC = BITTST(R0,5);
|
||||
IF !CC JUMP 1b;
|
||||
RTS;
|
||||
ENDPROC(_test_pll_locked)
|
||||
|
||||
.section .text
|
||||
|
||||
ENTRY(_do_hibernate)
|
||||
[--SP] = ( R7:0, P5:0 );
|
||||
[--SP] = RETS;
|
||||
/* Save System MMRs */
|
||||
R2 = R0;
|
||||
P0.H = hi(PLL_CTL);
|
||||
P0.L = lo(PLL_CTL);
|
||||
|
||||
#ifdef SIC_IMASK0
|
||||
PM_SYS_PUSH(SIC_IMASK0)
|
||||
#endif
|
||||
#ifdef SIC_IMASK1
|
||||
PM_SYS_PUSH(SIC_IMASK1)
|
||||
#endif
|
||||
#ifdef SIC_IMASK2
|
||||
PM_SYS_PUSH(SIC_IMASK2)
|
||||
#endif
|
||||
#ifdef SIC_IMASK
|
||||
PM_SYS_PUSH(SIC_IMASK)
|
||||
#endif
|
||||
#ifdef SICA_IMASK0
|
||||
PM_SYS_PUSH(SICA_IMASK0)
|
||||
#endif
|
||||
#ifdef SICA_IMASK1
|
||||
PM_SYS_PUSH(SICA_IMASK1)
|
||||
#endif
|
||||
#ifdef SIC_IAR2
|
||||
PM_SYS_PUSH(SIC_IAR0)
|
||||
PM_SYS_PUSH(SIC_IAR1)
|
||||
PM_SYS_PUSH(SIC_IAR2)
|
||||
#endif
|
||||
#ifdef SIC_IAR3
|
||||
PM_SYS_PUSH(SIC_IAR3)
|
||||
#endif
|
||||
#ifdef SIC_IAR4
|
||||
PM_SYS_PUSH(SIC_IAR4)
|
||||
PM_SYS_PUSH(SIC_IAR5)
|
||||
PM_SYS_PUSH(SIC_IAR6)
|
||||
#endif
|
||||
#ifdef SIC_IAR7
|
||||
PM_SYS_PUSH(SIC_IAR7)
|
||||
#endif
|
||||
#ifdef SIC_IAR8
|
||||
PM_SYS_PUSH(SIC_IAR8)
|
||||
PM_SYS_PUSH(SIC_IAR9)
|
||||
PM_SYS_PUSH(SIC_IAR10)
|
||||
PM_SYS_PUSH(SIC_IAR11)
|
||||
#endif
|
||||
|
||||
#ifdef SICA_IAR0
|
||||
PM_SYS_PUSH(SICA_IAR0)
|
||||
PM_SYS_PUSH(SICA_IAR1)
|
||||
PM_SYS_PUSH(SICA_IAR2)
|
||||
PM_SYS_PUSH(SICA_IAR3)
|
||||
PM_SYS_PUSH(SICA_IAR4)
|
||||
PM_SYS_PUSH(SICA_IAR5)
|
||||
PM_SYS_PUSH(SICA_IAR6)
|
||||
PM_SYS_PUSH(SICA_IAR7)
|
||||
#endif
|
||||
|
||||
#ifdef SIC_IWR
|
||||
PM_SYS_PUSH(SIC_IWR)
|
||||
#endif
|
||||
#ifdef SIC_IWR0
|
||||
PM_SYS_PUSH(SIC_IWR0)
|
||||
#endif
|
||||
#ifdef SIC_IWR1
|
||||
PM_SYS_PUSH(SIC_IWR1)
|
||||
#endif
|
||||
#ifdef SIC_IWR2
|
||||
PM_SYS_PUSH(SIC_IWR2)
|
||||
#endif
|
||||
#ifdef SICA_IWR0
|
||||
PM_SYS_PUSH(SICA_IWR0)
|
||||
#endif
|
||||
#ifdef SICA_IWR1
|
||||
PM_SYS_PUSH(SICA_IWR1)
|
||||
#endif
|
||||
|
||||
#ifdef PINT0_ASSIGN
|
||||
PM_SYS_PUSH(PINT0_ASSIGN)
|
||||
PM_SYS_PUSH(PINT1_ASSIGN)
|
||||
PM_SYS_PUSH(PINT2_ASSIGN)
|
||||
PM_SYS_PUSH(PINT3_ASSIGN)
|
||||
#endif
|
||||
|
||||
PM_SYS_PUSH(EBIU_AMBCTL0)
|
||||
PM_SYS_PUSH(EBIU_AMBCTL1)
|
||||
PM_SYS_PUSH16(EBIU_AMGCTL)
|
||||
|
||||
#ifdef EBIU_FCTL
|
||||
PM_SYS_PUSH(EBIU_MBSCTL)
|
||||
PM_SYS_PUSH(EBIU_MODE)
|
||||
PM_SYS_PUSH(EBIU_FCTL)
|
||||
#endif
|
||||
|
||||
PM_SYS_PUSH16(SYSCR)
|
||||
|
||||
/* Save Core MMRs */
|
||||
P0.H = hi(SRAM_BASE_ADDRESS);
|
||||
P0.L = lo(SRAM_BASE_ADDRESS);
|
||||
|
||||
PM_PUSH(DMEM_CONTROL)
|
||||
PM_PUSH(DCPLB_ADDR0)
|
||||
PM_PUSH(DCPLB_ADDR1)
|
||||
PM_PUSH(DCPLB_ADDR2)
|
||||
PM_PUSH(DCPLB_ADDR3)
|
||||
PM_PUSH(DCPLB_ADDR4)
|
||||
PM_PUSH(DCPLB_ADDR5)
|
||||
PM_PUSH(DCPLB_ADDR6)
|
||||
PM_PUSH(DCPLB_ADDR7)
|
||||
PM_PUSH(DCPLB_ADDR8)
|
||||
PM_PUSH(DCPLB_ADDR9)
|
||||
PM_PUSH(DCPLB_ADDR10)
|
||||
PM_PUSH(DCPLB_ADDR11)
|
||||
PM_PUSH(DCPLB_ADDR12)
|
||||
PM_PUSH(DCPLB_ADDR13)
|
||||
PM_PUSH(DCPLB_ADDR14)
|
||||
PM_PUSH(DCPLB_ADDR15)
|
||||
PM_PUSH(DCPLB_DATA0)
|
||||
PM_PUSH(DCPLB_DATA1)
|
||||
PM_PUSH(DCPLB_DATA2)
|
||||
PM_PUSH(DCPLB_DATA3)
|
||||
PM_PUSH(DCPLB_DATA4)
|
||||
PM_PUSH(DCPLB_DATA5)
|
||||
PM_PUSH(DCPLB_DATA6)
|
||||
PM_PUSH(DCPLB_DATA7)
|
||||
PM_PUSH(DCPLB_DATA8)
|
||||
PM_PUSH(DCPLB_DATA9)
|
||||
PM_PUSH(DCPLB_DATA10)
|
||||
PM_PUSH(DCPLB_DATA11)
|
||||
PM_PUSH(DCPLB_DATA12)
|
||||
PM_PUSH(DCPLB_DATA13)
|
||||
PM_PUSH(DCPLB_DATA14)
|
||||
PM_PUSH(DCPLB_DATA15)
|
||||
PM_PUSH(IMEM_CONTROL)
|
||||
PM_PUSH(ICPLB_ADDR0)
|
||||
PM_PUSH(ICPLB_ADDR1)
|
||||
PM_PUSH(ICPLB_ADDR2)
|
||||
PM_PUSH(ICPLB_ADDR3)
|
||||
PM_PUSH(ICPLB_ADDR4)
|
||||
PM_PUSH(ICPLB_ADDR5)
|
||||
PM_PUSH(ICPLB_ADDR6)
|
||||
PM_PUSH(ICPLB_ADDR7)
|
||||
PM_PUSH(ICPLB_ADDR8)
|
||||
PM_PUSH(ICPLB_ADDR9)
|
||||
PM_PUSH(ICPLB_ADDR10)
|
||||
PM_PUSH(ICPLB_ADDR11)
|
||||
PM_PUSH(ICPLB_ADDR12)
|
||||
PM_PUSH(ICPLB_ADDR13)
|
||||
PM_PUSH(ICPLB_ADDR14)
|
||||
PM_PUSH(ICPLB_ADDR15)
|
||||
PM_PUSH(ICPLB_DATA0)
|
||||
PM_PUSH(ICPLB_DATA1)
|
||||
PM_PUSH(ICPLB_DATA2)
|
||||
PM_PUSH(ICPLB_DATA3)
|
||||
PM_PUSH(ICPLB_DATA4)
|
||||
PM_PUSH(ICPLB_DATA5)
|
||||
PM_PUSH(ICPLB_DATA6)
|
||||
PM_PUSH(ICPLB_DATA7)
|
||||
PM_PUSH(ICPLB_DATA8)
|
||||
PM_PUSH(ICPLB_DATA9)
|
||||
PM_PUSH(ICPLB_DATA10)
|
||||
PM_PUSH(ICPLB_DATA11)
|
||||
PM_PUSH(ICPLB_DATA12)
|
||||
PM_PUSH(ICPLB_DATA13)
|
||||
PM_PUSH(ICPLB_DATA14)
|
||||
PM_PUSH(ICPLB_DATA15)
|
||||
PM_PUSH(EVT0)
|
||||
PM_PUSH(EVT1)
|
||||
PM_PUSH(EVT2)
|
||||
PM_PUSH(EVT3)
|
||||
PM_PUSH(EVT4)
|
||||
PM_PUSH(EVT5)
|
||||
PM_PUSH(EVT6)
|
||||
PM_PUSH(EVT7)
|
||||
PM_PUSH(EVT8)
|
||||
PM_PUSH(EVT9)
|
||||
PM_PUSH(EVT10)
|
||||
PM_PUSH(EVT11)
|
||||
PM_PUSH(EVT12)
|
||||
PM_PUSH(EVT13)
|
||||
PM_PUSH(EVT14)
|
||||
PM_PUSH(EVT15)
|
||||
PM_PUSH(IMASK)
|
||||
PM_PUSH(ILAT)
|
||||
PM_PUSH(IPRIO)
|
||||
PM_PUSH(TCNTL)
|
||||
PM_PUSH(TPERIOD)
|
||||
PM_PUSH(TSCALE)
|
||||
PM_PUSH(TCOUNT)
|
||||
PM_PUSH(TBUFCTL)
|
||||
|
||||
/* Save Core Registers */
|
||||
[--sp] = SYSCFG;
|
||||
[--sp] = ( R7:0, P5:0 );
|
||||
[--sp] = fp;
|
||||
[--sp] = usp;
|
||||
|
||||
[--sp] = i0;
|
||||
[--sp] = i1;
|
||||
[--sp] = i2;
|
||||
[--sp] = i3;
|
||||
|
||||
[--sp] = m0;
|
||||
[--sp] = m1;
|
||||
[--sp] = m2;
|
||||
[--sp] = m3;
|
||||
|
||||
[--sp] = l0;
|
||||
[--sp] = l1;
|
||||
[--sp] = l2;
|
||||
[--sp] = l3;
|
||||
|
||||
[--sp] = b0;
|
||||
[--sp] = b1;
|
||||
[--sp] = b2;
|
||||
[--sp] = b3;
|
||||
[--sp] = a0.x;
|
||||
[--sp] = a0.w;
|
||||
[--sp] = a1.x;
|
||||
[--sp] = a1.w;
|
||||
|
||||
[--sp] = LC0;
|
||||
[--sp] = LC1;
|
||||
[--sp] = LT0;
|
||||
[--sp] = LT1;
|
||||
[--sp] = LB0;
|
||||
[--sp] = LB1;
|
||||
|
||||
[--sp] = ASTAT;
|
||||
[--sp] = CYCLES;
|
||||
[--sp] = CYCLES2;
|
||||
|
||||
[--sp] = RETS;
|
||||
r0 = RETI;
|
||||
[--sp] = r0;
|
||||
[--sp] = RETX;
|
||||
[--sp] = RETN;
|
||||
[--sp] = RETE;
|
||||
[--sp] = SEQSTAT;
|
||||
|
||||
/* Save Magic, return address and Stack Pointer */
|
||||
P0.H = 0;
|
||||
P0.L = 0;
|
||||
R0.H = 0xDEAD; /* Hibernate Magic */
|
||||
R0.L = 0xBEEF;
|
||||
[P0++] = R0; /* Store Hibernate Magic */
|
||||
R0.H = .Lpm_resume_here;
|
||||
R0.L = .Lpm_resume_here;
|
||||
[P0++] = R0; /* Save Return Address */
|
||||
[P0++] = SP; /* Save Stack Pointer */
|
||||
P0.H = _hibernate_mode;
|
||||
P0.L = _hibernate_mode;
|
||||
R0 = R2;
|
||||
call (P0); /* Goodbye */
|
||||
|
||||
.Lpm_resume_here:
|
||||
|
||||
/* Restore Core Registers */
|
||||
SEQSTAT = [sp++];
|
||||
RETE = [sp++];
|
||||
RETN = [sp++];
|
||||
RETX = [sp++];
|
||||
r0 = [sp++];
|
||||
RETI = r0;
|
||||
RETS = [sp++];
|
||||
|
||||
CYCLES2 = [sp++];
|
||||
CYCLES = [sp++];
|
||||
ASTAT = [sp++];
|
||||
|
||||
LB1 = [sp++];
|
||||
LB0 = [sp++];
|
||||
LT1 = [sp++];
|
||||
LT0 = [sp++];
|
||||
LC1 = [sp++];
|
||||
LC0 = [sp++];
|
||||
|
||||
a1.w = [sp++];
|
||||
a1.x = [sp++];
|
||||
a0.w = [sp++];
|
||||
a0.x = [sp++];
|
||||
b3 = [sp++];
|
||||
b2 = [sp++];
|
||||
b1 = [sp++];
|
||||
b0 = [sp++];
|
||||
|
||||
l3 = [sp++];
|
||||
l2 = [sp++];
|
||||
l1 = [sp++];
|
||||
l0 = [sp++];
|
||||
|
||||
m3 = [sp++];
|
||||
m2 = [sp++];
|
||||
m1 = [sp++];
|
||||
m0 = [sp++];
|
||||
|
||||
i3 = [sp++];
|
||||
i2 = [sp++];
|
||||
i1 = [sp++];
|
||||
i0 = [sp++];
|
||||
|
||||
usp = [sp++];
|
||||
fp = [sp++];
|
||||
|
||||
( R7 : 0, P5 : 0) = [ SP ++ ];
|
||||
SYSCFG = [sp++];
|
||||
|
||||
/* Restore Core MMRs */
|
||||
|
||||
PM_POP(TBUFCTL)
|
||||
PM_POP(TCOUNT)
|
||||
PM_POP(TSCALE)
|
||||
PM_POP(TPERIOD)
|
||||
PM_POP(TCNTL)
|
||||
PM_POP(IPRIO)
|
||||
PM_POP(ILAT)
|
||||
PM_POP(IMASK)
|
||||
PM_POP(EVT15)
|
||||
PM_POP(EVT14)
|
||||
PM_POP(EVT13)
|
||||
PM_POP(EVT12)
|
||||
PM_POP(EVT11)
|
||||
PM_POP(EVT10)
|
||||
PM_POP(EVT9)
|
||||
PM_POP(EVT8)
|
||||
PM_POP(EVT7)
|
||||
PM_POP(EVT6)
|
||||
PM_POP(EVT5)
|
||||
PM_POP(EVT4)
|
||||
PM_POP(EVT3)
|
||||
PM_POP(EVT2)
|
||||
PM_POP(EVT1)
|
||||
PM_POP(EVT0)
|
||||
PM_POP(ICPLB_DATA15)
|
||||
PM_POP(ICPLB_DATA14)
|
||||
PM_POP(ICPLB_DATA13)
|
||||
PM_POP(ICPLB_DATA12)
|
||||
PM_POP(ICPLB_DATA11)
|
||||
PM_POP(ICPLB_DATA10)
|
||||
PM_POP(ICPLB_DATA9)
|
||||
PM_POP(ICPLB_DATA8)
|
||||
PM_POP(ICPLB_DATA7)
|
||||
PM_POP(ICPLB_DATA6)
|
||||
PM_POP(ICPLB_DATA5)
|
||||
PM_POP(ICPLB_DATA4)
|
||||
PM_POP(ICPLB_DATA3)
|
||||
PM_POP(ICPLB_DATA2)
|
||||
PM_POP(ICPLB_DATA1)
|
||||
PM_POP(ICPLB_DATA0)
|
||||
PM_POP(ICPLB_ADDR15)
|
||||
PM_POP(ICPLB_ADDR14)
|
||||
PM_POP(ICPLB_ADDR13)
|
||||
PM_POP(ICPLB_ADDR12)
|
||||
PM_POP(ICPLB_ADDR11)
|
||||
PM_POP(ICPLB_ADDR10)
|
||||
PM_POP(ICPLB_ADDR9)
|
||||
PM_POP(ICPLB_ADDR8)
|
||||
PM_POP(ICPLB_ADDR7)
|
||||
PM_POP(ICPLB_ADDR6)
|
||||
PM_POP(ICPLB_ADDR5)
|
||||
PM_POP(ICPLB_ADDR4)
|
||||
PM_POP(ICPLB_ADDR3)
|
||||
PM_POP(ICPLB_ADDR2)
|
||||
PM_POP(ICPLB_ADDR1)
|
||||
PM_POP(ICPLB_ADDR0)
|
||||
PM_POP(IMEM_CONTROL)
|
||||
PM_POP(DCPLB_DATA15)
|
||||
PM_POP(DCPLB_DATA14)
|
||||
PM_POP(DCPLB_DATA13)
|
||||
PM_POP(DCPLB_DATA12)
|
||||
PM_POP(DCPLB_DATA11)
|
||||
PM_POP(DCPLB_DATA10)
|
||||
PM_POP(DCPLB_DATA9)
|
||||
PM_POP(DCPLB_DATA8)
|
||||
PM_POP(DCPLB_DATA7)
|
||||
PM_POP(DCPLB_DATA6)
|
||||
PM_POP(DCPLB_DATA5)
|
||||
PM_POP(DCPLB_DATA4)
|
||||
PM_POP(DCPLB_DATA3)
|
||||
PM_POP(DCPLB_DATA2)
|
||||
PM_POP(DCPLB_DATA1)
|
||||
PM_POP(DCPLB_DATA0)
|
||||
PM_POP(DCPLB_ADDR15)
|
||||
PM_POP(DCPLB_ADDR14)
|
||||
PM_POP(DCPLB_ADDR13)
|
||||
PM_POP(DCPLB_ADDR12)
|
||||
PM_POP(DCPLB_ADDR11)
|
||||
PM_POP(DCPLB_ADDR10)
|
||||
PM_POP(DCPLB_ADDR9)
|
||||
PM_POP(DCPLB_ADDR8)
|
||||
PM_POP(DCPLB_ADDR7)
|
||||
PM_POP(DCPLB_ADDR6)
|
||||
PM_POP(DCPLB_ADDR5)
|
||||
PM_POP(DCPLB_ADDR4)
|
||||
PM_POP(DCPLB_ADDR3)
|
||||
PM_POP(DCPLB_ADDR2)
|
||||
PM_POP(DCPLB_ADDR1)
|
||||
PM_POP(DCPLB_ADDR0)
|
||||
PM_POP(DMEM_CONTROL)
|
||||
|
||||
/* Restore System MMRs */
|
||||
|
||||
P0.H = hi(PLL_CTL);
|
||||
P0.L = lo(PLL_CTL);
|
||||
PM_SYS_POP16(SYSCR)
|
||||
|
||||
#ifdef EBIU_FCTL
|
||||
PM_SYS_POP(EBIU_FCTL)
|
||||
PM_SYS_POP(EBIU_MODE)
|
||||
PM_SYS_POP(EBIU_MBSCTL)
|
||||
#endif
|
||||
PM_SYS_POP16(EBIU_AMGCTL)
|
||||
PM_SYS_POP(EBIU_AMBCTL1)
|
||||
PM_SYS_POP(EBIU_AMBCTL0)
|
||||
|
||||
#ifdef PINT0_ASSIGN
|
||||
PM_SYS_POP(PINT3_ASSIGN)
|
||||
PM_SYS_POP(PINT2_ASSIGN)
|
||||
PM_SYS_POP(PINT1_ASSIGN)
|
||||
PM_SYS_POP(PINT0_ASSIGN)
|
||||
#endif
|
||||
|
||||
#ifdef SICA_IWR1
|
||||
PM_SYS_POP(SICA_IWR1)
|
||||
#endif
|
||||
#ifdef SICA_IWR0
|
||||
PM_SYS_POP(SICA_IWR0)
|
||||
#endif
|
||||
#ifdef SIC_IWR2
|
||||
PM_SYS_POP(SIC_IWR2)
|
||||
#endif
|
||||
#ifdef SIC_IWR1
|
||||
PM_SYS_POP(SIC_IWR1)
|
||||
#endif
|
||||
#ifdef SIC_IWR0
|
||||
PM_SYS_POP(SIC_IWR0)
|
||||
#endif
|
||||
#ifdef SIC_IWR
|
||||
PM_SYS_POP(SIC_IWR)
|
||||
#endif
|
||||
|
||||
#ifdef SICA_IAR0
|
||||
PM_SYS_POP(SICA_IAR7)
|
||||
PM_SYS_POP(SICA_IAR6)
|
||||
PM_SYS_POP(SICA_IAR5)
|
||||
PM_SYS_POP(SICA_IAR4)
|
||||
PM_SYS_POP(SICA_IAR3)
|
||||
PM_SYS_POP(SICA_IAR2)
|
||||
PM_SYS_POP(SICA_IAR1)
|
||||
PM_SYS_POP(SICA_IAR0)
|
||||
#endif
|
||||
|
||||
#ifdef SIC_IAR8
|
||||
PM_SYS_POP(SIC_IAR11)
|
||||
PM_SYS_POP(SIC_IAR10)
|
||||
PM_SYS_POP(SIC_IAR9)
|
||||
PM_SYS_POP(SIC_IAR8)
|
||||
#endif
|
||||
#ifdef SIC_IAR7
|
||||
PM_SYS_POP(SIC_IAR7)
|
||||
#endif
|
||||
#ifdef SIC_IAR6
|
||||
PM_SYS_POP(SIC_IAR6)
|
||||
PM_SYS_POP(SIC_IAR5)
|
||||
PM_SYS_POP(SIC_IAR4)
|
||||
#endif
|
||||
#ifdef SIC_IAR3
|
||||
PM_SYS_POP(SIC_IAR3)
|
||||
#endif
|
||||
#ifdef SIC_IAR2
|
||||
PM_SYS_POP(SIC_IAR2)
|
||||
PM_SYS_POP(SIC_IAR1)
|
||||
PM_SYS_POP(SIC_IAR0)
|
||||
#endif
|
||||
#ifdef SICA_IMASK1
|
||||
PM_SYS_POP(SICA_IMASK1)
|
||||
#endif
|
||||
#ifdef SICA_IMASK0
|
||||
PM_SYS_POP(SICA_IMASK0)
|
||||
#endif
|
||||
#ifdef SIC_IMASK
|
||||
PM_SYS_POP(SIC_IMASK)
|
||||
#endif
|
||||
#ifdef SIC_IMASK2
|
||||
PM_SYS_POP(SIC_IMASK2)
|
||||
#endif
|
||||
#ifdef SIC_IMASK1
|
||||
PM_SYS_POP(SIC_IMASK1)
|
||||
#endif
|
||||
#ifdef SIC_IMASK0
|
||||
PM_SYS_POP(SIC_IMASK0)
|
||||
#endif
|
||||
|
||||
[--sp] = RETI; /* Clear Global Interrupt Disable */
|
||||
SP += 4;
|
||||
|
||||
RETS = [SP++];
|
||||
( R7:0, P5:0 ) = [SP++];
|
||||
RTS;
|
||||
ENDPROC(_do_hibernate)
|
||||
|
|
|
|||
|
|
@ -158,23 +158,45 @@ ENTRY(_ex_single_step)
|
|||
cc = r7 == r6;
|
||||
if cc jump _bfin_return_from_exception;
|
||||
|
||||
/* If we were in user mode, do the single step normally. */
|
||||
/* Don't do single step in hardware exception handler */
|
||||
p5.l = lo(IPEND);
|
||||
p5.h = hi(IPEND);
|
||||
r6 = [p5];
|
||||
cc = bittst(r6, 5);
|
||||
if cc jump _bfin_return_from_exception;
|
||||
|
||||
#ifdef CONFIG_KGDB
|
||||
/* skip single step if current interrupt priority is higher than
|
||||
* that of the first instruction, from which gdb starts single step */
|
||||
r6 >>= 6;
|
||||
r7 = 10;
|
||||
.Lfind_priority_start:
|
||||
cc = bittst(r6, 0);
|
||||
if cc jump .Lfind_priority_done;
|
||||
r6 >>= 1;
|
||||
r7 += -1;
|
||||
cc = r7 == 0;
|
||||
if cc jump .Lfind_priority_done;
|
||||
jump.s .Lfind_priority_start;
|
||||
.Lfind_priority_done:
|
||||
p4.l = _debugger_step;
|
||||
p4.h = _debugger_step;
|
||||
r6 = [p4];
|
||||
cc = r6 == 0;
|
||||
if cc jump .Ldo_single_step;
|
||||
r6 += -1;
|
||||
cc = r6 < r7;
|
||||
if cc jump _bfin_return_from_exception;
|
||||
.Ldo_single_step:
|
||||
#endif
|
||||
|
||||
/* If we were in user mode, do the single step normally. */
|
||||
r6 = [p5];
|
||||
r7 = 0xffe0 (z);
|
||||
r7 = r7 & r6;
|
||||
cc = r7 == 0;
|
||||
if !cc jump 1f;
|
||||
if cc jump 1f;
|
||||
|
||||
/* Single stepping only a single instruction, so clear the trace
|
||||
* bit here. */
|
||||
r7 = syscfg;
|
||||
bitclr (r7, 0);
|
||||
syscfg = R7;
|
||||
jump _ex_trap_c;
|
||||
|
||||
1:
|
||||
/*
|
||||
* We were in an interrupt handler. By convention, all of them save
|
||||
* SYSCFG with their first instruction, so by checking whether our
|
||||
|
|
@ -202,11 +224,15 @@ ENTRY(_ex_single_step)
|
|||
cc = R7 == R6;
|
||||
if !cc jump _bfin_return_from_exception;
|
||||
|
||||
1:
|
||||
/* Single stepping only a single instruction, so clear the trace
|
||||
* bit here. */
|
||||
r7 = syscfg;
|
||||
bitclr (r7, 0);
|
||||
syscfg = R7;
|
||||
|
||||
/* Fall through to _bfin_return_from_exception. */
|
||||
jump _ex_trap_c;
|
||||
|
||||
ENDPROC(_ex_single_step)
|
||||
|
||||
ENTRY(_bfin_return_from_exception)
|
||||
|
|
|
|||
|
|
@ -459,6 +459,8 @@ static struct irq_chip bfin_gpio_irqchip = {
|
|||
.mask = bfin_gpio_mask_irq,
|
||||
.mask_ack = bfin_gpio_mask_ack_irq,
|
||||
.unmask = bfin_gpio_unmask_irq,
|
||||
.disable = bfin_gpio_mask_irq,
|
||||
.enable = bfin_gpio_unmask_irq,
|
||||
.set_type = bfin_gpio_irq_type,
|
||||
.startup = bfin_gpio_irq_startup,
|
||||
.shutdown = bfin_gpio_irq_shutdown,
|
||||
|
|
@ -846,6 +848,8 @@ static struct irq_chip bfin_gpio_irqchip = {
|
|||
.mask = bfin_gpio_mask_irq,
|
||||
.mask_ack = bfin_gpio_mask_ack_irq,
|
||||
.unmask = bfin_gpio_unmask_irq,
|
||||
.disable = bfin_gpio_mask_irq,
|
||||
.enable = bfin_gpio_unmask_irq,
|
||||
.set_type = bfin_gpio_irq_type,
|
||||
.startup = bfin_gpio_irq_startup,
|
||||
.shutdown = bfin_gpio_irq_shutdown,
|
||||
|
|
|
|||
|
|
@ -38,8 +38,9 @@
|
|||
#include <linux/io.h>
|
||||
#include <linux/irq.h>
|
||||
|
||||
#include <asm/dpmc.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/dma.h>
|
||||
#include <asm/dpmc.h>
|
||||
|
||||
#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
|
||||
#define WAKEUP_TYPE PM_WAKE_HIGH
|
||||
|
|
@ -61,16 +62,17 @@
|
|||
#define WAKEUP_TYPE PM_WAKE_BOTH_EDGES
|
||||
#endif
|
||||
|
||||
|
||||
void bfin_pm_suspend_standby_enter(void)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
#ifdef CONFIG_PM_WAKEUP_BY_GPIO
|
||||
gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
|
||||
#endif
|
||||
|
||||
u32 flags;
|
||||
|
||||
local_irq_save(flags);
|
||||
bfin_pm_setup();
|
||||
bfin_pm_standby_setup();
|
||||
|
||||
#ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
|
||||
sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
|
||||
|
|
@ -78,7 +80,7 @@ void bfin_pm_suspend_standby_enter(void)
|
|||
sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
|
||||
#endif
|
||||
|
||||
bfin_pm_restore();
|
||||
bfin_pm_standby_restore();
|
||||
|
||||
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
|
||||
bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
|
||||
|
|
@ -93,6 +95,195 @@ void bfin_pm_suspend_standby_enter(void)
|
|||
local_irq_restore(flags);
|
||||
}
|
||||
|
||||
int bf53x_suspend_l1_mem(unsigned char *memptr)
|
||||
{
|
||||
dma_memcpy(memptr, (const void *) L1_CODE_START, L1_CODE_LENGTH);
|
||||
dma_memcpy(memptr + L1_CODE_LENGTH, (const void *) L1_DATA_A_START,
|
||||
L1_DATA_A_LENGTH);
|
||||
dma_memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH,
|
||||
(const void *) L1_DATA_B_START, L1_DATA_B_LENGTH);
|
||||
memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH +
|
||||
L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START,
|
||||
L1_SCRATCH_LENGTH);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int bf53x_resume_l1_mem(unsigned char *memptr)
|
||||
{
|
||||
dma_memcpy((void *) L1_CODE_START, memptr, L1_CODE_LENGTH);
|
||||
dma_memcpy((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH,
|
||||
L1_DATA_A_LENGTH);
|
||||
dma_memcpy((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH +
|
||||
L1_DATA_A_LENGTH, L1_DATA_B_LENGTH);
|
||||
memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH +
|
||||
L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_BFIN_WB
|
||||
static void flushinv_all_dcache(void)
|
||||
{
|
||||
u32 way, bank, subbank, set;
|
||||
u32 status, addr;
|
||||
u32 dmem_ctl = bfin_read_DMEM_CONTROL();
|
||||
|
||||
for (bank = 0; bank < 2; ++bank) {
|
||||
if (!(dmem_ctl & (1 << (DMC1_P - bank))))
|
||||
continue;
|
||||
|
||||
for (way = 0; way < 2; ++way)
|
||||
for (subbank = 0; subbank < 4; ++subbank)
|
||||
for (set = 0; set < 64; ++set) {
|
||||
|
||||
bfin_write_DTEST_COMMAND(
|
||||
way << 26 |
|
||||
bank << 23 |
|
||||
subbank << 16 |
|
||||
set << 5
|
||||
);
|
||||
CSYNC();
|
||||
status = bfin_read_DTEST_DATA0();
|
||||
|
||||
/* only worry about valid/dirty entries */
|
||||
if ((status & 0x3) != 0x3)
|
||||
continue;
|
||||
|
||||
/* construct the address using the tag */
|
||||
addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
|
||||
|
||||
/* flush it */
|
||||
__asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr));
|
||||
}
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
static inline void dcache_disable(void)
|
||||
{
|
||||
#ifdef CONFIG_BFIN_DCACHE
|
||||
unsigned long ctrl;
|
||||
|
||||
#ifdef CONFIG_BFIN_WB
|
||||
flushinv_all_dcache();
|
||||
#endif
|
||||
SSYNC();
|
||||
ctrl = bfin_read_DMEM_CONTROL();
|
||||
ctrl &= ~ENDCPLB;
|
||||
bfin_write_DMEM_CONTROL(ctrl);
|
||||
SSYNC();
|
||||
#endif
|
||||
}
|
||||
|
||||
static inline void dcache_enable(void)
|
||||
{
|
||||
#ifdef CONFIG_BFIN_DCACHE
|
||||
unsigned long ctrl;
|
||||
SSYNC();
|
||||
ctrl = bfin_read_DMEM_CONTROL();
|
||||
ctrl |= ENDCPLB;
|
||||
bfin_write_DMEM_CONTROL(ctrl);
|
||||
SSYNC();
|
||||
#endif
|
||||
}
|
||||
|
||||
static inline void icache_disable(void)
|
||||
{
|
||||
#ifdef CONFIG_BFIN_ICACHE
|
||||
unsigned long ctrl;
|
||||
SSYNC();
|
||||
ctrl = bfin_read_IMEM_CONTROL();
|
||||
ctrl &= ~ENICPLB;
|
||||
bfin_write_IMEM_CONTROL(ctrl);
|
||||
SSYNC();
|
||||
#endif
|
||||
}
|
||||
|
||||
static inline void icache_enable(void)
|
||||
{
|
||||
#ifdef CONFIG_BFIN_ICACHE
|
||||
unsigned long ctrl;
|
||||
SSYNC();
|
||||
ctrl = bfin_read_IMEM_CONTROL();
|
||||
ctrl |= ENICPLB;
|
||||
bfin_write_IMEM_CONTROL(ctrl);
|
||||
SSYNC();
|
||||
#endif
|
||||
}
|
||||
|
||||
int bfin_pm_suspend_mem_enter(void)
|
||||
{
|
||||
unsigned long flags;
|
||||
int wakeup, ret;
|
||||
|
||||
unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH
|
||||
+ L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH,
|
||||
GFP_KERNEL);
|
||||
|
||||
if (memptr == NULL) {
|
||||
panic("bf53x_suspend_l1_mem malloc failed");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
wakeup = bfin_read_VR_CTL() & ~FREQ;
|
||||
wakeup |= SCKELOW;
|
||||
|
||||
/* FIXME: merge this somehow with set_irq_wake */
|
||||
#ifdef CONFIG_PM_BFIN_WAKE_RTC
|
||||
wakeup |= WAKE;
|
||||
#endif
|
||||
#ifdef CONFIG_PM_BFIN_WAKE_PH6
|
||||
wakeup |= PHYWE;
|
||||
#endif
|
||||
#ifdef CONFIG_PM_BFIN_WAKE_CAN
|
||||
wakeup |= CANWE;
|
||||
#endif
|
||||
#ifdef CONFIG_PM_BFIN_WAKE_GP
|
||||
wakeup |= GPWE;
|
||||
#endif
|
||||
#ifdef CONFIG_PM_BFIN_WAKE_USB
|
||||
wakeup |= USBWE;
|
||||
#endif
|
||||
#ifdef CONFIG_PM_BFIN_WAKE_KEYPAD
|
||||
wakeup |= KPADWE;
|
||||
#endif
|
||||
#ifdef CONFIG_PM_BFIN_WAKE_ROTARY
|
||||
wakeup |= ROTWE;
|
||||
#endif
|
||||
|
||||
local_irq_save(flags);
|
||||
|
||||
ret = blackfin_dma_suspend();
|
||||
|
||||
if (ret) {
|
||||
local_irq_restore(flags);
|
||||
kfree(memptr);
|
||||
return ret;
|
||||
}
|
||||
|
||||
bfin_gpio_pm_hibernate_suspend();
|
||||
|
||||
dcache_disable();
|
||||
icache_disable();
|
||||
bf53x_suspend_l1_mem(memptr);
|
||||
|
||||
do_hibernate(wakeup); /* Goodbye */
|
||||
|
||||
bf53x_resume_l1_mem(memptr);
|
||||
|
||||
icache_enable();
|
||||
dcache_enable();
|
||||
|
||||
bfin_gpio_pm_hibernate_restore();
|
||||
blackfin_dma_resume();
|
||||
|
||||
local_irq_restore(flags);
|
||||
kfree(memptr);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* bfin_pm_valid - Tell the PM core that we only support the standby sleep
|
||||
* state
|
||||
|
|
@ -101,7 +292,24 @@ void bfin_pm_suspend_standby_enter(void)
|
|||
*/
|
||||
static int bfin_pm_valid(suspend_state_t state)
|
||||
{
|
||||
return (state == PM_SUSPEND_STANDBY);
|
||||
return (state == PM_SUSPEND_STANDBY
|
||||
#ifndef BF533_FAMILY
|
||||
/*
|
||||
* On BF533/2/1:
|
||||
* If we enter Hibernate the SCKE Pin is driven Low,
|
||||
* so that the SDRAM enters Self Refresh Mode.
|
||||
* However when the reset sequence that follows hibernate
|
||||
* state is executed, SCKE is driven High, taking the
|
||||
* SDRAM out of Self Refresh.
|
||||
*
|
||||
* If you reconfigure and access the SDRAM "very quickly",
|
||||
* you are likely to avoid errors, otherwise the SDRAM
|
||||
* start losing its contents.
|
||||
* An external HW workaround is possible using logic gates.
|
||||
*/
|
||||
|| state == PM_SUSPEND_MEM
|
||||
#endif
|
||||
);
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
@ -115,10 +323,9 @@ static int bfin_pm_enter(suspend_state_t state)
|
|||
case PM_SUSPEND_STANDBY:
|
||||
bfin_pm_suspend_standby_enter();
|
||||
break;
|
||||
|
||||
case PM_SUSPEND_MEM:
|
||||
return -ENOTSUPP;
|
||||
|
||||
bfin_pm_suspend_mem_enter();
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -41,215 +41,309 @@
|
|||
#include <asm/blackfin.h>
|
||||
#include "blackfin_sram.h"
|
||||
|
||||
spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
|
||||
|
||||
#if CONFIG_L1_MAX_PIECE < 16
|
||||
#undef CONFIG_L1_MAX_PIECE
|
||||
#define CONFIG_L1_MAX_PIECE 16
|
||||
#endif
|
||||
|
||||
#if CONFIG_L1_MAX_PIECE > 1024
|
||||
#undef CONFIG_L1_MAX_PIECE
|
||||
#define CONFIG_L1_MAX_PIECE 1024
|
||||
#endif
|
||||
|
||||
#define SRAM_SLT_NULL 0
|
||||
#define SRAM_SLT_FREE 1
|
||||
#define SRAM_SLT_ALLOCATED 2
|
||||
static spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
|
||||
static spinlock_t l2_sram_lock;
|
||||
|
||||
/* the data structure for L1 scratchpad and DATA SRAM */
|
||||
struct l1_sram_piece {
|
||||
struct sram_piece {
|
||||
void *paddr;
|
||||
int size;
|
||||
int flag;
|
||||
pid_t pid;
|
||||
struct sram_piece *next;
|
||||
};
|
||||
|
||||
static struct l1_sram_piece l1_ssram[CONFIG_L1_MAX_PIECE];
|
||||
static struct sram_piece free_l1_ssram_head, used_l1_ssram_head;
|
||||
|
||||
#if L1_DATA_A_LENGTH != 0
|
||||
static struct l1_sram_piece l1_data_A_sram[CONFIG_L1_MAX_PIECE];
|
||||
static struct sram_piece free_l1_data_A_sram_head, used_l1_data_A_sram_head;
|
||||
#endif
|
||||
|
||||
#if L1_DATA_B_LENGTH != 0
|
||||
static struct l1_sram_piece l1_data_B_sram[CONFIG_L1_MAX_PIECE];
|
||||
static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head;
|
||||
#endif
|
||||
|
||||
#if L1_CODE_LENGTH != 0
|
||||
static struct l1_sram_piece l1_inst_sram[CONFIG_L1_MAX_PIECE];
|
||||
static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head;
|
||||
#endif
|
||||
|
||||
/* L1 Scratchpad SRAM initialization function */
|
||||
void __init l1sram_init(void)
|
||||
{
|
||||
printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
|
||||
L1_SCRATCH_LENGTH >> 10);
|
||||
#ifdef L2_LENGTH
|
||||
static struct sram_piece free_l2_sram_head, used_l2_sram_head;
|
||||
#endif
|
||||
|
||||
memset(&l1_ssram, 0x00, sizeof(l1_ssram));
|
||||
l1_ssram[0].paddr = (void *)L1_SCRATCH_START;
|
||||
l1_ssram[0].size = L1_SCRATCH_LENGTH;
|
||||
l1_ssram[0].flag = SRAM_SLT_FREE;
|
||||
static struct kmem_cache *sram_piece_cache;
|
||||
|
||||
/* L1 Scratchpad SRAM initialization function */
|
||||
static void __init l1sram_init(void)
|
||||
{
|
||||
free_l1_ssram_head.next =
|
||||
kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
|
||||
if (!free_l1_ssram_head.next) {
|
||||
printk(KERN_INFO"Fail to initialize Scratchpad data SRAM.\n");
|
||||
return;
|
||||
}
|
||||
|
||||
free_l1_ssram_head.next->paddr = (void *)L1_SCRATCH_START;
|
||||
free_l1_ssram_head.next->size = L1_SCRATCH_LENGTH;
|
||||
free_l1_ssram_head.next->pid = 0;
|
||||
free_l1_ssram_head.next->next = NULL;
|
||||
|
||||
used_l1_ssram_head.next = NULL;
|
||||
|
||||
/* mutex initialize */
|
||||
spin_lock_init(&l1sram_lock);
|
||||
|
||||
printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
|
||||
L1_SCRATCH_LENGTH >> 10);
|
||||
}
|
||||
|
||||
void __init l1_data_sram_init(void)
|
||||
static void __init l1_data_sram_init(void)
|
||||
{
|
||||
#if L1_DATA_A_LENGTH != 0
|
||||
memset(&l1_data_A_sram, 0x00, sizeof(l1_data_A_sram));
|
||||
l1_data_A_sram[0].paddr = (void *)L1_DATA_A_START +
|
||||
(_ebss_l1 - _sdata_l1);
|
||||
l1_data_A_sram[0].size = L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
|
||||
l1_data_A_sram[0].flag = SRAM_SLT_FREE;
|
||||
free_l1_data_A_sram_head.next =
|
||||
kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
|
||||
if (!free_l1_data_A_sram_head.next) {
|
||||
printk(KERN_INFO"Fail to initialize L1 Data A SRAM.\n");
|
||||
return;
|
||||
}
|
||||
|
||||
printk(KERN_INFO "Blackfin Data A SRAM: %d KB (%d KB free)\n",
|
||||
L1_DATA_A_LENGTH >> 10, l1_data_A_sram[0].size >> 10);
|
||||
free_l1_data_A_sram_head.next->paddr =
|
||||
(void *)L1_DATA_A_START + (_ebss_l1 - _sdata_l1);
|
||||
free_l1_data_A_sram_head.next->size =
|
||||
L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
|
||||
free_l1_data_A_sram_head.next->pid = 0;
|
||||
free_l1_data_A_sram_head.next->next = NULL;
|
||||
|
||||
used_l1_data_A_sram_head.next = NULL;
|
||||
|
||||
printk(KERN_INFO "Blackfin L1 Data A SRAM: %d KB (%d KB free)\n",
|
||||
L1_DATA_A_LENGTH >> 10,
|
||||
free_l1_data_A_sram_head.next->size >> 10);
|
||||
#endif
|
||||
#if L1_DATA_B_LENGTH != 0
|
||||
memset(&l1_data_B_sram, 0x00, sizeof(l1_data_B_sram));
|
||||
l1_data_B_sram[0].paddr = (void *)L1_DATA_B_START +
|
||||
(_ebss_b_l1 - _sdata_b_l1);
|
||||
l1_data_B_sram[0].size = L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
|
||||
l1_data_B_sram[0].flag = SRAM_SLT_FREE;
|
||||
free_l1_data_B_sram_head.next =
|
||||
kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
|
||||
if (!free_l1_data_B_sram_head.next) {
|
||||
printk(KERN_INFO"Fail to initialize L1 Data B SRAM.\n");
|
||||
return;
|
||||
}
|
||||
|
||||
printk(KERN_INFO "Blackfin Data B SRAM: %d KB (%d KB free)\n",
|
||||
L1_DATA_B_LENGTH >> 10, l1_data_B_sram[0].size >> 10);
|
||||
free_l1_data_B_sram_head.next->paddr =
|
||||
(void *)L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1);
|
||||
free_l1_data_B_sram_head.next->size =
|
||||
L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
|
||||
free_l1_data_B_sram_head.next->pid = 0;
|
||||
free_l1_data_B_sram_head.next->next = NULL;
|
||||
|
||||
used_l1_data_B_sram_head.next = NULL;
|
||||
|
||||
printk(KERN_INFO "Blackfin L1 Data B SRAM: %d KB (%d KB free)\n",
|
||||
L1_DATA_B_LENGTH >> 10,
|
||||
free_l1_data_B_sram_head.next->size >> 10);
|
||||
#endif
|
||||
|
||||
/* mutex initialize */
|
||||
spin_lock_init(&l1_data_sram_lock);
|
||||
}
|
||||
|
||||
void __init l1_inst_sram_init(void)
|
||||
static void __init l1_inst_sram_init(void)
|
||||
{
|
||||
#if L1_CODE_LENGTH != 0
|
||||
memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram));
|
||||
l1_inst_sram[0].paddr = (void *)L1_CODE_START + (_etext_l1 - _stext_l1);
|
||||
l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
|
||||
l1_inst_sram[0].flag = SRAM_SLT_FREE;
|
||||
free_l1_inst_sram_head.next =
|
||||
kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
|
||||
if (!free_l1_inst_sram_head.next) {
|
||||
printk(KERN_INFO"Fail to initialize L1 Instruction SRAM.\n");
|
||||
return;
|
||||
}
|
||||
|
||||
printk(KERN_INFO "Blackfin Instruction SRAM: %d KB (%d KB free)\n",
|
||||
L1_CODE_LENGTH >> 10, l1_inst_sram[0].size >> 10);
|
||||
free_l1_inst_sram_head.next->paddr =
|
||||
(void *)L1_CODE_START + (_etext_l1 - _stext_l1);
|
||||
free_l1_inst_sram_head.next->size =
|
||||
L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
|
||||
free_l1_inst_sram_head.next->pid = 0;
|
||||
free_l1_inst_sram_head.next->next = NULL;
|
||||
|
||||
used_l1_inst_sram_head.next = NULL;
|
||||
|
||||
printk(KERN_INFO "Blackfin L1 Instruction SRAM: %d KB (%d KB free)\n",
|
||||
L1_CODE_LENGTH >> 10,
|
||||
free_l1_inst_sram_head.next->size >> 10);
|
||||
#endif
|
||||
|
||||
/* mutex initialize */
|
||||
spin_lock_init(&l1_inst_sram_lock);
|
||||
}
|
||||
|
||||
/* L1 memory allocate function */
|
||||
static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
|
||||
static void __init l2_sram_init(void)
|
||||
{
|
||||
int i, index = 0;
|
||||
void *addr = NULL;
|
||||
#ifdef L2_LENGTH
|
||||
free_l2_sram_head.next =
|
||||
kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
|
||||
if (!free_l2_sram_head.next) {
|
||||
printk(KERN_INFO"Fail to initialize L2 SRAM.\n");
|
||||
return;
|
||||
}
|
||||
|
||||
if (size <= 0)
|
||||
free_l2_sram_head.next->paddr = (void *)L2_START +
|
||||
(_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
|
||||
free_l2_sram_head.next->size = L2_LENGTH -
|
||||
(_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
|
||||
free_l2_sram_head.next->pid = 0;
|
||||
free_l2_sram_head.next->next = NULL;
|
||||
|
||||
used_l2_sram_head.next = NULL;
|
||||
|
||||
printk(KERN_INFO "Blackfin L2 SRAM: %d KB (%d KB free)\n",
|
||||
L2_LENGTH >> 10,
|
||||
free_l2_sram_head.next->size >> 10);
|
||||
#endif
|
||||
|
||||
/* mutex initialize */
|
||||
spin_lock_init(&l2_sram_lock);
|
||||
}
|
||||
void __init bfin_sram_init(void)
|
||||
{
|
||||
sram_piece_cache = kmem_cache_create("sram_piece_cache",
|
||||
sizeof(struct sram_piece),
|
||||
0, SLAB_PANIC, NULL);
|
||||
|
||||
l1sram_init();
|
||||
l1_data_sram_init();
|
||||
l1_inst_sram_init();
|
||||
l2_sram_init();
|
||||
}
|
||||
|
||||
/* SRAM allocate function */
|
||||
static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
|
||||
struct sram_piece *pused_head)
|
||||
{
|
||||
struct sram_piece *pslot, *plast, *pavail;
|
||||
|
||||
if (size <= 0 || !pfree_head || !pused_head)
|
||||
return NULL;
|
||||
|
||||
/* Align the size */
|
||||
size = (size + 3) & ~3;
|
||||
|
||||
/* not use the good method to match the best slot !!! */
|
||||
/* search an available memory slot */
|
||||
for (i = 0; i < count; i++) {
|
||||
if ((pfree[i].flag == SRAM_SLT_FREE)
|
||||
&& (pfree[i].size >= size)) {
|
||||
addr = pfree[i].paddr;
|
||||
pfree[i].flag = SRAM_SLT_ALLOCATED;
|
||||
pfree[i].pid = current->pid;
|
||||
index = i;
|
||||
break;
|
||||
pslot = pfree_head->next;
|
||||
plast = pfree_head;
|
||||
|
||||
/* search an available piece slot */
|
||||
while (pslot != NULL && size > pslot->size) {
|
||||
plast = pslot;
|
||||
pslot = pslot->next;
|
||||
}
|
||||
}
|
||||
if (i >= count)
|
||||
|
||||
if (!pslot)
|
||||
return NULL;
|
||||
|
||||
/* updated the NULL memory slot !!! */
|
||||
if (pfree[i].size > size) {
|
||||
for (i = 0; i < count; i++) {
|
||||
if (pfree[i].flag == SRAM_SLT_NULL) {
|
||||
pfree[i].pid = 0;
|
||||
pfree[i].flag = SRAM_SLT_FREE;
|
||||
pfree[i].paddr = addr + size;
|
||||
pfree[i].size = pfree[index].size - size;
|
||||
pfree[index].size = size;
|
||||
break;
|
||||
}
|
||||
}
|
||||
if (pslot->size == size) {
|
||||
plast->next = pslot->next;
|
||||
pavail = pslot;
|
||||
} else {
|
||||
pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
|
||||
|
||||
if (!pavail)
|
||||
return NULL;
|
||||
|
||||
pavail->paddr = pslot->paddr;
|
||||
pavail->size = size;
|
||||
pslot->paddr += size;
|
||||
pslot->size -= size;
|
||||
}
|
||||
|
||||
return addr;
|
||||
pavail->pid = current->pid;
|
||||
|
||||
pslot = pused_head->next;
|
||||
plast = pused_head;
|
||||
|
||||
/* insert new piece into used piece list !!! */
|
||||
while (pslot != NULL && pavail->paddr < pslot->paddr) {
|
||||
plast = pslot;
|
||||
pslot = pslot->next;
|
||||
}
|
||||
|
||||
pavail->next = pslot;
|
||||
plast->next = pavail;
|
||||
|
||||
return pavail->paddr;
|
||||
}
|
||||
|
||||
/* Allocate the largest available block. */
|
||||
static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count,
|
||||
static void *_sram_alloc_max(struct sram_piece *pfree_head,
|
||||
struct sram_piece *pused_head,
|
||||
unsigned long *psize)
|
||||
{
|
||||
unsigned long best = 0;
|
||||
int i, index = -1;
|
||||
void *addr = NULL;
|
||||
struct sram_piece *pslot, *pmax;
|
||||
|
||||
/* search an available memory slot */
|
||||
for (i = 0; i < count; i++) {
|
||||
if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) {
|
||||
addr = pfree[i].paddr;
|
||||
index = i;
|
||||
best = pfree[i].size;
|
||||
}
|
||||
}
|
||||
if (index < 0)
|
||||
if (!pfree_head || !pused_head)
|
||||
return NULL;
|
||||
*psize = best;
|
||||
|
||||
pfree[index].pid = current->pid;
|
||||
pfree[index].flag = SRAM_SLT_ALLOCATED;
|
||||
return addr;
|
||||
pmax = pslot = pfree_head->next;
|
||||
|
||||
/* search an available piece slot */
|
||||
while (pslot != NULL) {
|
||||
if (pslot->size > pmax->size)
|
||||
pmax = pslot;
|
||||
pslot = pslot->next;
|
||||
}
|
||||
|
||||
/* L1 memory free function */
|
||||
static int _l1_sram_free(const void *addr,
|
||||
struct l1_sram_piece *pfree,
|
||||
int count)
|
||||
if (!pmax)
|
||||
return NULL;
|
||||
|
||||
*psize = pmax->size;
|
||||
|
||||
return _sram_alloc(*psize, pfree_head, pused_head);
|
||||
}
|
||||
|
||||
/* SRAM free function */
|
||||
static int _sram_free(const void *addr,
|
||||
struct sram_piece *pfree_head,
|
||||
struct sram_piece *pused_head)
|
||||
{
|
||||
int i, index = 0;
|
||||
struct sram_piece *pslot, *plast, *pavail;
|
||||
|
||||
if (!pfree_head || !pused_head)
|
||||
return -1;
|
||||
|
||||
/* search the relevant memory slot */
|
||||
for (i = 0; i < count; i++) {
|
||||
if (pfree[i].paddr == addr) {
|
||||
if (pfree[i].flag != SRAM_SLT_ALLOCATED) {
|
||||
/* error log */
|
||||
return -1;
|
||||
pslot = pused_head->next;
|
||||
plast = pused_head;
|
||||
|
||||
/* search an available piece slot */
|
||||
while (pslot != NULL && pslot->paddr != addr) {
|
||||
plast = pslot;
|
||||
pslot = pslot->next;
|
||||
}
|
||||
index = i;
|
||||
break;
|
||||
}
|
||||
}
|
||||
if (i >= count)
|
||||
|
||||
if (!pslot)
|
||||
return -1;
|
||||
|
||||
pfree[index].pid = 0;
|
||||
pfree[index].flag = SRAM_SLT_FREE;
|
||||
plast->next = pslot->next;
|
||||
pavail = pslot;
|
||||
pavail->pid = 0;
|
||||
|
||||
/* link the next address slot */
|
||||
for (i = 0; i < count; i++) {
|
||||
if (((pfree[index].paddr + pfree[index].size) == pfree[i].paddr)
|
||||
&& (pfree[i].flag == SRAM_SLT_FREE)) {
|
||||
pfree[i].pid = 0;
|
||||
pfree[i].flag = SRAM_SLT_NULL;
|
||||
pfree[index].size += pfree[i].size;
|
||||
pfree[index].flag = SRAM_SLT_FREE;
|
||||
break;
|
||||
}
|
||||
/* insert free pieces back to the free list */
|
||||
pslot = pfree_head->next;
|
||||
plast = pfree_head;
|
||||
|
||||
while (pslot != NULL && addr > pslot->paddr) {
|
||||
plast = pslot;
|
||||
pslot = pslot->next;
|
||||
}
|
||||
|
||||
/* link the last address slot */
|
||||
for (i = 0; i < count; i++) {
|
||||
if (((pfree[i].paddr + pfree[i].size) == pfree[index].paddr) &&
|
||||
(pfree[i].flag == SRAM_SLT_FREE)) {
|
||||
pfree[index].flag = SRAM_SLT_NULL;
|
||||
pfree[i].size += pfree[index].size;
|
||||
break;
|
||||
if (plast != pfree_head && plast->paddr + plast->size == pavail->paddr) {
|
||||
plast->size += pavail->size;
|
||||
kmem_cache_free(sram_piece_cache, pavail);
|
||||
} else {
|
||||
pavail->next = plast;
|
||||
plast->next = pavail;
|
||||
plast = pavail;
|
||||
}
|
||||
|
||||
if (pslot && plast->paddr + plast->size == pslot->paddr) {
|
||||
plast->size += pslot->size;
|
||||
plast->next = pslot->next;
|
||||
kmem_cache_free(sram_piece_cache, pslot);
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
|
@ -272,6 +366,11 @@ int sram_free(const void *addr)
|
|||
else if (addr >= (void *)L1_DATA_B_START
|
||||
&& addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH))
|
||||
return l1_data_B_sram_free(addr);
|
||||
#endif
|
||||
#ifdef L2_LENGTH
|
||||
else if (addr >= (void *)L2_START
|
||||
&& addr < (void *)(L2_START + L2_LENGTH))
|
||||
return l2_sram_free(addr);
|
||||
#endif
|
||||
else
|
||||
return -1;
|
||||
|
|
@ -287,7 +386,8 @@ void *l1_data_A_sram_alloc(size_t size)
|
|||
spin_lock_irqsave(&l1_data_sram_lock, flags);
|
||||
|
||||
#if L1_DATA_A_LENGTH != 0
|
||||
addr = _l1_sram_alloc(size, l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
|
||||
addr = _sram_alloc(size, &free_l1_data_A_sram_head,
|
||||
&used_l1_data_A_sram_head);
|
||||
#endif
|
||||
|
||||
/* add mutex operation */
|
||||
|
|
@ -309,8 +409,8 @@ int l1_data_A_sram_free(const void *addr)
|
|||
spin_lock_irqsave(&l1_data_sram_lock, flags);
|
||||
|
||||
#if L1_DATA_A_LENGTH != 0
|
||||
ret = _l1_sram_free(addr,
|
||||
l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
|
||||
ret = _sram_free(addr, &free_l1_data_A_sram_head,
|
||||
&used_l1_data_A_sram_head);
|
||||
#else
|
||||
ret = -1;
|
||||
#endif
|
||||
|
|
@ -331,7 +431,8 @@ void *l1_data_B_sram_alloc(size_t size)
|
|||
/* add mutex operation */
|
||||
spin_lock_irqsave(&l1_data_sram_lock, flags);
|
||||
|
||||
addr = _l1_sram_alloc(size, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
|
||||
addr = _sram_alloc(size, &free_l1_data_B_sram_head,
|
||||
&used_l1_data_B_sram_head);
|
||||
|
||||
/* add mutex operation */
|
||||
spin_unlock_irqrestore(&l1_data_sram_lock, flags);
|
||||
|
|
@ -355,7 +456,8 @@ int l1_data_B_sram_free(const void *addr)
|
|||
/* add mutex operation */
|
||||
spin_lock_irqsave(&l1_data_sram_lock, flags);
|
||||
|
||||
ret = _l1_sram_free(addr, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
|
||||
ret = _sram_free(addr, &free_l1_data_B_sram_head,
|
||||
&used_l1_data_B_sram_head);
|
||||
|
||||
/* add mutex operation */
|
||||
spin_unlock_irqrestore(&l1_data_sram_lock, flags);
|
||||
|
|
@ -408,7 +510,8 @@ void *l1_inst_sram_alloc(size_t size)
|
|||
/* add mutex operation */
|
||||
spin_lock_irqsave(&l1_inst_sram_lock, flags);
|
||||
|
||||
addr = _l1_sram_alloc(size, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
|
||||
addr = _sram_alloc(size, &free_l1_inst_sram_head,
|
||||
&used_l1_inst_sram_head);
|
||||
|
||||
/* add mutex operation */
|
||||
spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
|
||||
|
|
@ -432,7 +535,8 @@ int l1_inst_sram_free(const void *addr)
|
|||
/* add mutex operation */
|
||||
spin_lock_irqsave(&l1_inst_sram_lock, flags);
|
||||
|
||||
ret = _l1_sram_free(addr, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
|
||||
ret = _sram_free(addr, &free_l1_inst_sram_head,
|
||||
&used_l1_inst_sram_head);
|
||||
|
||||
/* add mutex operation */
|
||||
spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
|
||||
|
|
@ -453,7 +557,8 @@ void *l1sram_alloc(size_t size)
|
|||
/* add mutex operation */
|
||||
spin_lock_irqsave(&l1sram_lock, flags);
|
||||
|
||||
addr = _l1_sram_alloc(size, l1_ssram, ARRAY_SIZE(l1_ssram));
|
||||
addr = _sram_alloc(size, &free_l1_ssram_head,
|
||||
&used_l1_ssram_head);
|
||||
|
||||
/* add mutex operation */
|
||||
spin_unlock_irqrestore(&l1sram_lock, flags);
|
||||
|
|
@ -470,7 +575,8 @@ void *l1sram_alloc_max(size_t *psize)
|
|||
/* add mutex operation */
|
||||
spin_lock_irqsave(&l1sram_lock, flags);
|
||||
|
||||
addr = _l1_sram_alloc_max(l1_ssram, ARRAY_SIZE(l1_ssram), psize);
|
||||
addr = _sram_alloc_max(&free_l1_ssram_head,
|
||||
&used_l1_ssram_head, psize);
|
||||
|
||||
/* add mutex operation */
|
||||
spin_unlock_irqrestore(&l1sram_lock, flags);
|
||||
|
|
@ -487,7 +593,8 @@ int l1sram_free(const void *addr)
|
|||
/* add mutex operation */
|
||||
spin_lock_irqsave(&l1sram_lock, flags);
|
||||
|
||||
ret = _l1_sram_free(addr, l1_ssram, ARRAY_SIZE(l1_ssram));
|
||||
ret = _sram_free(addr, &free_l1_ssram_head,
|
||||
&used_l1_ssram_head);
|
||||
|
||||
/* add mutex operation */
|
||||
spin_unlock_irqrestore(&l1sram_lock, flags);
|
||||
|
|
@ -495,6 +602,64 @@ int l1sram_free(const void *addr)
|
|||
return ret;
|
||||
}
|
||||
|
||||
void *l2_sram_alloc(size_t size)
|
||||
{
|
||||
#ifdef L2_LENGTH
|
||||
unsigned flags;
|
||||
void *addr;
|
||||
|
||||
/* add mutex operation */
|
||||
spin_lock_irqsave(&l2_sram_lock, flags);
|
||||
|
||||
addr = _sram_alloc(size, &free_l2_sram_head,
|
||||
&used_l2_sram_head);
|
||||
|
||||
/* add mutex operation */
|
||||
spin_unlock_irqrestore(&l2_sram_lock, flags);
|
||||
|
||||
pr_debug("Allocated address in l2_sram_alloc is 0x%lx+0x%lx\n",
|
||||
(long unsigned int)addr, size);
|
||||
|
||||
return addr;
|
||||
#else
|
||||
return NULL;
|
||||
#endif
|
||||
}
|
||||
EXPORT_SYMBOL(l2_sram_alloc);
|
||||
|
||||
void *l2_sram_zalloc(size_t size)
|
||||
{
|
||||
void *addr = l2_sram_alloc(size);
|
||||
|
||||
if (addr)
|
||||
memset(addr, 0x00, size);
|
||||
|
||||
return addr;
|
||||
}
|
||||
EXPORT_SYMBOL(l2_sram_zalloc);
|
||||
|
||||
int l2_sram_free(const void *addr)
|
||||
{
|
||||
#ifdef L2_LENGTH
|
||||
unsigned flags;
|
||||
int ret;
|
||||
|
||||
/* add mutex operation */
|
||||
spin_lock_irqsave(&l2_sram_lock, flags);
|
||||
|
||||
ret = _sram_free(addr, &free_l2_sram_head,
|
||||
&used_l2_sram_head);
|
||||
|
||||
/* add mutex operation */
|
||||
spin_unlock_irqrestore(&l2_sram_lock, flags);
|
||||
|
||||
return ret;
|
||||
#else
|
||||
return -1;
|
||||
#endif
|
||||
}
|
||||
EXPORT_SYMBOL(l2_sram_free);
|
||||
|
||||
int sram_free_with_lsl(const void *addr)
|
||||
{
|
||||
struct sram_list_struct *lsl, **tmp;
|
||||
|
|
@ -533,6 +698,9 @@ void *sram_alloc_with_lsl(size_t size, unsigned long flags)
|
|||
if (addr == NULL && (flags & L1_DATA_B_SRAM))
|
||||
addr = l1_data_B_sram_alloc(size);
|
||||
|
||||
if (addr == NULL && (flags & L2_SRAM))
|
||||
addr = l2_sram_alloc(size);
|
||||
|
||||
if (addr == NULL) {
|
||||
kfree(lsl);
|
||||
return NULL;
|
||||
|
|
@ -549,49 +717,80 @@ EXPORT_SYMBOL(sram_alloc_with_lsl);
|
|||
/* Once we get a real allocator, we'll throw all of this away.
|
||||
* Until then, we need some sort of visibility into the L1 alloc.
|
||||
*/
|
||||
static void _l1sram_proc_read(char *buf, int *len, const char *desc,
|
||||
struct l1_sram_piece *pfree, const int array_size)
|
||||
/* Need to keep line of output the same. Currently, that is 44 bytes
|
||||
* (including newline).
|
||||
*/
|
||||
static int _sram_proc_read(char *buf, int *len, int count, const char *desc,
|
||||
struct sram_piece *pfree_head,
|
||||
struct sram_piece *pused_head)
|
||||
{
|
||||
int i;
|
||||
struct sram_piece *pslot;
|
||||
|
||||
*len += sprintf(&buf[*len], "--- L1 %-14s Size PID State\n", desc);
|
||||
for (i = 0; i < array_size; ++i) {
|
||||
const char *alloc_type;
|
||||
switch (pfree[i].flag) {
|
||||
case SRAM_SLT_NULL: alloc_type = "NULL"; break;
|
||||
case SRAM_SLT_FREE: alloc_type = "FREE"; break;
|
||||
case SRAM_SLT_ALLOCATED: alloc_type = "ALLOCATED"; break;
|
||||
default: alloc_type = "????"; break;
|
||||
if (!pfree_head || !pused_head)
|
||||
return -1;
|
||||
|
||||
*len += sprintf(&buf[*len], "--- SRAM %-14s Size PID State \n", desc);
|
||||
|
||||
/* search the relevant memory slot */
|
||||
pslot = pused_head->next;
|
||||
|
||||
while (pslot != NULL) {
|
||||
*len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
|
||||
pslot->paddr, pslot->paddr + pslot->size,
|
||||
pslot->size, pslot->pid, "ALLOCATED");
|
||||
|
||||
pslot = pslot->next;
|
||||
}
|
||||
*len += sprintf(&buf[*len], "%p-%p %8i %4i %s\n",
|
||||
pfree[i].paddr, pfree[i].paddr + pfree[i].size,
|
||||
pfree[i].size, pfree[i].pid, alloc_type);
|
||||
|
||||
pslot = pfree_head->next;
|
||||
|
||||
while (pslot != NULL) {
|
||||
*len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
|
||||
pslot->paddr, pslot->paddr + pslot->size,
|
||||
pslot->size, pslot->pid, "FREE");
|
||||
|
||||
pslot = pslot->next;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
static int l1sram_proc_read(char *buf, char **start, off_t offset, int count,
|
||||
static int sram_proc_read(char *buf, char **start, off_t offset, int count,
|
||||
int *eof, void *data)
|
||||
{
|
||||
int len = 0;
|
||||
|
||||
_l1sram_proc_read(buf, &len, "Scratchpad",
|
||||
l1_ssram, ARRAY_SIZE(l1_ssram));
|
||||
if (_sram_proc_read(buf, &len, count, "Scratchpad",
|
||||
&free_l1_ssram_head, &used_l1_ssram_head))
|
||||
goto not_done;
|
||||
#if L1_DATA_A_LENGTH != 0
|
||||
_l1sram_proc_read(buf, &len, "Data A",
|
||||
l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
|
||||
if (_sram_proc_read(buf, &len, count, "L1 Data A",
|
||||
&free_l1_data_A_sram_head,
|
||||
&used_l1_data_A_sram_head))
|
||||
goto not_done;
|
||||
#endif
|
||||
#if L1_DATA_B_LENGTH != 0
|
||||
_l1sram_proc_read(buf, &len, "Data B",
|
||||
l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
|
||||
if (_sram_proc_read(buf, &len, count, "L1 Data B",
|
||||
&free_l1_data_B_sram_head,
|
||||
&used_l1_data_B_sram_head))
|
||||
goto not_done;
|
||||
#endif
|
||||
#if L1_CODE_LENGTH != 0
|
||||
_l1sram_proc_read(buf, &len, "Instruction",
|
||||
l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
|
||||
if (_sram_proc_read(buf, &len, count, "L1 Instruction",
|
||||
&free_l1_inst_sram_head, &used_l1_inst_sram_head))
|
||||
goto not_done;
|
||||
#endif
|
||||
#ifdef L2_LENGTH
|
||||
if (_sram_proc_read(buf, &len, count, "L2",
|
||||
&free_l2_sram_head, &used_l2_sram_head))
|
||||
goto not_done;
|
||||
#endif
|
||||
|
||||
*eof = 1;
|
||||
not_done:
|
||||
return len;
|
||||
}
|
||||
|
||||
static int __init l1sram_proc_init(void)
|
||||
static int __init sram_proc_init(void)
|
||||
{
|
||||
struct proc_dir_entry *ptr;
|
||||
ptr = create_proc_entry("sram", S_IFREG | S_IRUGO, NULL);
|
||||
|
|
@ -600,8 +799,8 @@ static int __init l1sram_proc_init(void)
|
|||
return -1;
|
||||
}
|
||||
ptr->owner = THIS_MODULE;
|
||||
ptr->read_proc = l1sram_proc_read;
|
||||
ptr->read_proc = sram_proc_read;
|
||||
return 0;
|
||||
}
|
||||
late_initcall(l1sram_proc_init);
|
||||
late_initcall(sram_proc_init);
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -30,9 +30,7 @@
|
|||
#ifndef __BLACKFIN_SRAM_H__
|
||||
#define __BLACKFIN_SRAM_H__
|
||||
|
||||
extern void l1sram_init(void);
|
||||
extern void l1_inst_sram_init(void);
|
||||
extern void l1_data_sram_init(void);
|
||||
extern void bfin_sram_init(void);
|
||||
extern void *l1sram_alloc(size_t);
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -137,11 +137,14 @@ void __init mem_init(void)
|
|||
"(%uk init code, %uk kernel code, %uk data, %uk dma, %uk reserved)\n",
|
||||
(unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10,
|
||||
initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10)));
|
||||
}
|
||||
|
||||
static int __init sram_init(void)
|
||||
{
|
||||
unsigned long tmp;
|
||||
|
||||
/* Initialize the blackfin L1 Memory. */
|
||||
l1sram_init();
|
||||
l1_data_sram_init();
|
||||
l1_inst_sram_init();
|
||||
bfin_sram_init();
|
||||
|
||||
/* Allocate this once; never free it. We assume this gives us a
|
||||
pointer to the start of L1 scratchpad memory; panic if it
|
||||
|
|
@ -152,7 +155,10 @@ void __init mem_init(void)
|
|||
tmp, (unsigned long)L1_SCRATCH_TASK_INFO);
|
||||
panic("No L1, time to give up\n");
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
pure_initcall(sram_init);
|
||||
|
||||
static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -92,16 +92,20 @@ extern void *l1_data_B_sram_alloc(size_t);
|
|||
extern void *l1_inst_sram_alloc(size_t);
|
||||
extern void *l1_data_sram_alloc(size_t);
|
||||
extern void *l1_data_sram_zalloc(size_t);
|
||||
extern void *l2_sram_alloc(size_t);
|
||||
extern void *l2_sram_zalloc(size_t);
|
||||
extern int l1_data_A_sram_free(const void*);
|
||||
extern int l1_data_B_sram_free(const void*);
|
||||
extern int l1_inst_sram_free(const void*);
|
||||
extern int l1_data_sram_free(const void*);
|
||||
extern int l2_sram_free(const void *);
|
||||
extern int sram_free(const void*);
|
||||
|
||||
#define L1_INST_SRAM 0x00000001
|
||||
#define L1_DATA_A_SRAM 0x00000002
|
||||
#define L1_DATA_B_SRAM 0x00000004
|
||||
#define L1_DATA_SRAM 0x00000006
|
||||
#define L2_SRAM 0x00000008
|
||||
extern void *sram_alloc_with_lsl(size_t, unsigned long);
|
||||
extern int sram_free_with_lsl(const void*);
|
||||
|
||||
|
|
@ -114,7 +118,9 @@ extern struct file_operations dpmc_fops;
|
|||
extern unsigned long _ramstart, _ramend, _rambase;
|
||||
extern unsigned long memory_start, memory_end, physical_mem_end;
|
||||
extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
|
||||
_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[];
|
||||
_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[],
|
||||
_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
|
||||
_ebss_l2[], _l2_lma_start[];
|
||||
|
||||
#ifdef CONFIG_MTD_UCLINUX
|
||||
extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
|
||||
|
|
|
|||
|
|
@ -144,8 +144,16 @@ struct dma_channel {
|
|||
void *data;
|
||||
unsigned int dma_enable_flag;
|
||||
unsigned int loopback_flag;
|
||||
#ifdef CONFIG_PM
|
||||
unsigned short saved_peripheral_map;
|
||||
#endif
|
||||
};
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
int blackfin_dma_suspend(void);
|
||||
void blackfin_dma_resume(void);
|
||||
#endif
|
||||
|
||||
/*******************************************************************************
|
||||
* DMA API's
|
||||
*******************************************************************************/
|
||||
|
|
|
|||
|
|
@ -7,63 +7,18 @@
|
|||
#ifndef _BLACKFIN_DPMC_H_
|
||||
#define _BLACKFIN_DPMC_H_
|
||||
|
||||
#define SLEEP_MODE 1
|
||||
#define DEEP_SLEEP_MODE 2
|
||||
#define ACTIVE_PLL_DISABLED 3
|
||||
#define FULLON_MODE 4
|
||||
#define ACTIVE_PLL_ENABLED 5
|
||||
#define HIBERNATE_MODE 6
|
||||
|
||||
#define IOCTL_FULL_ON_MODE _IO('s', 0xA0)
|
||||
#define IOCTL_ACTIVE_MODE _IO('s', 0xA1)
|
||||
#define IOCTL_SLEEP_MODE _IO('s', 0xA2)
|
||||
#define IOCTL_DEEP_SLEEP_MODE _IO('s', 0xA3)
|
||||
#define IOCTL_HIBERNATE_MODE _IO('s', 0xA4)
|
||||
#define IOCTL_CHANGE_FREQUENCY _IOW('s', 0xA5, unsigned long)
|
||||
#define IOCTL_CHANGE_VOLTAGE _IOW('s', 0xA6, unsigned long)
|
||||
#define IOCTL_SET_CCLK _IOW('s', 0xA7, unsigned long)
|
||||
#define IOCTL_SET_SCLK _IOW('s', 0xA8, unsigned long)
|
||||
#define IOCTL_GET_PLLSTATUS _IOW('s', 0xA9, unsigned long)
|
||||
#define IOCTL_GET_CORECLOCK _IOW('s', 0xAA, unsigned long)
|
||||
#define IOCTL_GET_SYSTEMCLOCK _IOW('s', 0xAB, unsigned long)
|
||||
#define IOCTL_GET_VCO _IOW('s', 0xAC, unsigned long)
|
||||
#define IOCTL_DISABLE_WDOG_TIMER _IO('s', 0xAD)
|
||||
#define IOCTL_UNMASK_WDOG_WAKEUP_EVENT _IO('s',0xAE)
|
||||
#define IOCTL_PROGRAM_WDOG_TIMER _IOW('s',0xAF,unsigned long)
|
||||
#define IOCTL_CLEAR_WDOG_WAKEUP_EVENT _IO('s',0xB0)
|
||||
#define IOCTL_SLEEP_DEEPER_MODE _IO('s',0xB1)
|
||||
|
||||
#define DPMC_MINOR 254
|
||||
|
||||
#define ON 0
|
||||
#define OFF 1
|
||||
|
||||
#ifdef __KERNEL__
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
unsigned long calc_volt(void);
|
||||
int calc_vlev(int vlt);
|
||||
unsigned long change_voltage(unsigned long volt);
|
||||
int calc_msel(int vco_hz);
|
||||
unsigned long change_frequency(unsigned long vco_mhz);
|
||||
int set_pll_div(unsigned short sel, unsigned char flag);
|
||||
int get_vco(void);
|
||||
unsigned long change_system_clock(unsigned long clock);
|
||||
unsigned long change_core_clock(unsigned long clock);
|
||||
unsigned long get_pll_status(void);
|
||||
void change_baud(int baud);
|
||||
void fullon_mode(void);
|
||||
void active_mode(void);
|
||||
void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
|
||||
void deep_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
|
||||
void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
|
||||
void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
|
||||
void program_wdog_timer(unsigned long);
|
||||
void unmask_wdog_wakeup_evt(void);
|
||||
void clear_wdog_wakeup_evt(void);
|
||||
void disable_wdog_timer(void);
|
||||
void do_hibernate(int wakeup);
|
||||
void set_dram_srfs(void);
|
||||
void unset_dram_srfs(void);
|
||||
|
||||
extern unsigned long get_cclk(void);
|
||||
extern unsigned long get_sclk(void);
|
||||
#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
|
||||
|
||||
struct bfin_dpmc_platform_data {
|
||||
const unsigned int *tuple_tab;
|
||||
|
|
@ -71,8 +26,33 @@ struct bfin_dpmc_platform_data {
|
|||
unsigned short vr_settling_time; /* in us */
|
||||
};
|
||||
|
||||
#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
|
||||
#else
|
||||
|
||||
#define PM_PUSH(x) \
|
||||
R0 = [P0 + (x - SRAM_BASE_ADDRESS)];\
|
||||
[--SP] = R0;\
|
||||
|
||||
#define PM_POP(x) \
|
||||
R0 = [SP++];\
|
||||
[P0 + (x - SRAM_BASE_ADDRESS)] = R0;\
|
||||
|
||||
#define PM_SYS_PUSH(x) \
|
||||
R0 = [P0 + (x - PLL_CTL)];\
|
||||
[--SP] = R0;\
|
||||
|
||||
#define PM_SYS_POP(x) \
|
||||
R0 = [SP++];\
|
||||
[P0 + (x - PLL_CTL)] = R0;\
|
||||
|
||||
#define PM_SYS_PUSH16(x) \
|
||||
R0 = w[P0 + (x - PLL_CTL)];\
|
||||
[--SP] = R0;\
|
||||
|
||||
#define PM_SYS_POP16(x) \
|
||||
R0 = [SP++];\
|
||||
w[P0 + (x - PLL_CTL)] = R0;\
|
||||
|
||||
#endif
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
#endif /*_BLACKFIN_DPMC_H_*/
|
||||
|
|
|
|||
|
|
@ -15,6 +15,8 @@
|
|||
#define EF_BFIN_FDPIC 0x00000002 /* -mfdpic */
|
||||
#define EF_BFIN_CODE_IN_L1 0x00000010 /* --code-in-l1 */
|
||||
#define EF_BFIN_DATA_IN_L1 0x00000020 /* --data-in-l1 */
|
||||
#define EF_BFIN_CODE_IN_L2 0x00000040 /* --code-in-l2 */
|
||||
#define EF_BFIN_DATA_IN_L2 0x00000080 /* --data-in-l2 */
|
||||
|
||||
typedef unsigned long elf_greg_t;
|
||||
|
||||
|
|
|
|||
|
|
@ -376,8 +376,12 @@ struct gpio_port_t {
|
|||
#endif
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
unsigned int bfin_pm_setup(void);
|
||||
void bfin_pm_restore(void);
|
||||
|
||||
unsigned int bfin_pm_standby_setup(void);
|
||||
void bfin_pm_standby_restore(void);
|
||||
|
||||
void bfin_gpio_pm_hibernate_restore(void);
|
||||
void bfin_gpio_pm_hibernate_suspend(void);
|
||||
|
||||
#ifndef CONFIG_BF54x
|
||||
#define PM_WAKE_RISING 0x1
|
||||
|
|
@ -392,17 +396,8 @@ void gpio_pm_wakeup_free(unsigned gpio);
|
|||
|
||||
struct gpio_port_s {
|
||||
unsigned short data;
|
||||
unsigned short data_clear;
|
||||
unsigned short data_set;
|
||||
unsigned short toggle;
|
||||
unsigned short maska;
|
||||
unsigned short maska_clear;
|
||||
unsigned short maska_set;
|
||||
unsigned short maska_toggle;
|
||||
unsigned short maskb;
|
||||
unsigned short maskb_clear;
|
||||
unsigned short maskb_set;
|
||||
unsigned short maskb_toggle;
|
||||
unsigned short dir;
|
||||
unsigned short polar;
|
||||
unsigned short edge;
|
||||
|
|
@ -411,10 +406,10 @@ struct gpio_port_s {
|
|||
|
||||
unsigned short fer;
|
||||
unsigned short reserved;
|
||||
unsigned short mux;
|
||||
};
|
||||
#endif /*CONFIG_BF54x*/
|
||||
#endif /*CONFIG_PM*/
|
||||
|
||||
/***********************************************************
|
||||
*
|
||||
* FUNCTIONS: Blackfin GPIO Driver
|
||||
|
|
|
|||
|
|
@ -23,6 +23,8 @@
|
|||
#define ANOMALY_05000245 (1)
|
||||
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
|
||||
#define ANOMALY_05000265 (1)
|
||||
/* New Feature: EMAC TX DMA Word Alignment */
|
||||
#define ANOMALY_05000285 (1)
|
||||
/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
|
||||
#define ANOMALY_05000312 (1)
|
||||
/* Incorrect Access of OTP_STATUS During otp_write() Function */
|
||||
|
|
|
|||
|
|
@ -118,16 +118,25 @@ static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
|
|||
|
||||
#define DRIVER_NAME "bfin_sir"
|
||||
|
||||
static void bfin_sir_hw_init(void)
|
||||
static int bfin_sir_hw_init(void)
|
||||
{
|
||||
int ret = -ENODEV;
|
||||
#ifdef CONFIG_BFIN_SIR0
|
||||
peripheral_request(P_UART0_TX, DRIVER_NAME);
|
||||
peripheral_request(P_UART0_RX, DRIVER_NAME);
|
||||
ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_BFIN_SIR1
|
||||
peripheral_request(P_UART1_TX, DRIVER_NAME);
|
||||
peripheral_request(P_UART1_RX, DRIVER_NAME);
|
||||
ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
#endif
|
||||
SSYNC();
|
||||
return ret;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -302,6 +302,7 @@
|
|||
#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */
|
||||
#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */
|
||||
#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */
|
||||
#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */
|
||||
#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */
|
||||
|
||||
#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */
|
||||
|
|
|
|||
|
|
@ -146,33 +146,6 @@
|
|||
#define SDRAM_CL CL_3
|
||||
#endif
|
||||
|
||||
#if (CONFIG_MEM_SIZE == 128)
|
||||
#define SDRAM_SIZE EBSZ_128
|
||||
#endif
|
||||
#if (CONFIG_MEM_SIZE == 64)
|
||||
#define SDRAM_SIZE EBSZ_64
|
||||
#endif
|
||||
#if (CONFIG_MEM_SIZE == 32)
|
||||
#define SDRAM_SIZE EBSZ_32
|
||||
#endif
|
||||
#if (CONFIG_MEM_SIZE == 16)
|
||||
#define SDRAM_SIZE EBSZ_16
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 11)
|
||||
#define SDRAM_WIDTH EBCAW_11
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 10)
|
||||
#define SDRAM_WIDTH EBCAW_10
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 9)
|
||||
#define SDRAM_WIDTH EBCAW_9
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 8)
|
||||
#define SDRAM_WIDTH EBCAW_8
|
||||
#endif
|
||||
|
||||
#define mem_SDBCTL (SDRAM_WIDTH | SDRAM_SIZE | EBE)
|
||||
|
||||
/* Equation from section 17 (p17-46) of BF533 HRM */
|
||||
#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
|
||||
|
||||
|
|
|
|||
|
|
@ -110,11 +110,16 @@ static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
|
|||
|
||||
#define DRIVER_NAME "bfin_sir"
|
||||
|
||||
static void bfin_sir_hw_init(void)
|
||||
static int bfin_sir_hw_init(void)
|
||||
{
|
||||
int ret = -ENODEV;
|
||||
#ifdef CONFIG_BFIN_SIR0
|
||||
peripheral_request(P_UART0_TX, DRIVER_NAME);
|
||||
peripheral_request(P_UART0_RX, DRIVER_NAME);
|
||||
ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
#endif
|
||||
SSYNC();
|
||||
return ret;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -133,33 +133,6 @@
|
|||
#define SDRAM_CL CL_3
|
||||
#endif
|
||||
|
||||
#if (CONFIG_MEM_SIZE == 128)
|
||||
#define SDRAM_SIZE EBSZ_128
|
||||
#endif
|
||||
#if (CONFIG_MEM_SIZE == 64)
|
||||
#define SDRAM_SIZE EBSZ_64
|
||||
#endif
|
||||
#if (CONFIG_MEM_SIZE == 32)
|
||||
#define SDRAM_SIZE EBSZ_32
|
||||
#endif
|
||||
#if (CONFIG_MEM_SIZE == 16)
|
||||
#define SDRAM_SIZE EBSZ_16
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 11)
|
||||
#define SDRAM_WIDTH EBCAW_11
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 10)
|
||||
#define SDRAM_WIDTH EBCAW_10
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 9)
|
||||
#define SDRAM_WIDTH EBCAW_9
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 8)
|
||||
#define SDRAM_WIDTH EBCAW_8
|
||||
#endif
|
||||
|
||||
#define mem_SDBCTL (SDRAM_WIDTH | SDRAM_SIZE | EBE)
|
||||
|
||||
/* Equation from section 17 (p17-46) of BF533 HRM */
|
||||
#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
|
||||
|
||||
|
|
|
|||
|
|
@ -118,16 +118,25 @@ static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
|
|||
|
||||
#define DRIVER_NAME "bfin_sir"
|
||||
|
||||
static void bfin_sir_hw_init(void)
|
||||
static int bfin_sir_hw_init(void)
|
||||
{
|
||||
int ret = -ENODEV;
|
||||
#ifdef CONFIG_BFIN_SIR0
|
||||
peripheral_request(P_UART0_TX, DRIVER_NAME);
|
||||
peripheral_request(P_UART0_RX, DRIVER_NAME);
|
||||
ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_BFIN_SIR1
|
||||
peripheral_request(P_UART1_TX, DRIVER_NAME);
|
||||
peripheral_request(P_UART1_RX, DRIVER_NAME);
|
||||
ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
#endif
|
||||
SSYNC();
|
||||
return ret;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -290,6 +290,7 @@
|
|||
#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */
|
||||
#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */
|
||||
#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */
|
||||
#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */
|
||||
#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */
|
||||
|
||||
#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */
|
||||
|
|
|
|||
|
|
@ -139,33 +139,6 @@
|
|||
#define SDRAM_CL CL_3
|
||||
#endif
|
||||
|
||||
#if (CONFIG_MEM_SIZE == 128)
|
||||
#define SDRAM_SIZE EBSZ_128
|
||||
#endif
|
||||
#if (CONFIG_MEM_SIZE == 64)
|
||||
#define SDRAM_SIZE EBSZ_64
|
||||
#endif
|
||||
#if (CONFIG_MEM_SIZE == 32)
|
||||
#define SDRAM_SIZE EBSZ_32
|
||||
#endif
|
||||
#if (CONFIG_MEM_SIZE == 16)
|
||||
#define SDRAM_SIZE EBSZ_16
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 11)
|
||||
#define SDRAM_WIDTH EBCAW_11
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 10)
|
||||
#define SDRAM_WIDTH EBCAW_10
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 9)
|
||||
#define SDRAM_WIDTH EBCAW_9
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 8)
|
||||
#define SDRAM_WIDTH EBCAW_8
|
||||
#endif
|
||||
|
||||
#define mem_SDBCTL (SDRAM_WIDTH | SDRAM_SIZE | EBE)
|
||||
|
||||
/* Equation from section 17 (p17-46) of BF533 HRM */
|
||||
#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
|
||||
|
||||
|
|
|
|||
|
|
@ -124,26 +124,43 @@ struct bfin_sir_self {
|
|||
|
||||
#define DRIVER_NAME "bfin_sir"
|
||||
|
||||
static void bfin_sir_hw_init(void)
|
||||
static int bfin_sir_hw_init(void)
|
||||
{
|
||||
int ret = -ENODEV;
|
||||
#ifdef CONFIG_BFIN_SIR0
|
||||
peripheral_request(P_UART0_TX, DRIVER_NAME);
|
||||
peripheral_request(P_UART0_RX, DRIVER_NAME);
|
||||
ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_BFIN_SIR1
|
||||
peripheral_request(P_UART1_TX, DRIVER_NAME);
|
||||
peripheral_request(P_UART1_RX, DRIVER_NAME);
|
||||
ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_BFIN_SIR2
|
||||
peripheral_request(P_UART2_TX, DRIVER_NAME);
|
||||
peripheral_request(P_UART2_RX, DRIVER_NAME);
|
||||
ret = peripheral_request(P_UART2_TX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
ret = peripheral_request(P_UART2_RX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_BFIN_SIR3
|
||||
peripheral_request(P_UART3_TX, DRIVER_NAME);
|
||||
peripheral_request(P_UART3_RX, DRIVER_NAME);
|
||||
ret = peripheral_request(P_UART3_TX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
ret = peripheral_request(P_UART3_RX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
#endif
|
||||
SSYNC();
|
||||
return ret;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -209,3 +209,11 @@ struct gpio_port_t {
|
|||
unsigned short dummy7;
|
||||
unsigned int port_mux;
|
||||
};
|
||||
|
||||
struct gpio_port_s {
|
||||
unsigned short fer;
|
||||
unsigned short data;
|
||||
unsigned short dir;
|
||||
unsigned short inen;
|
||||
unsigned int mux;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -110,11 +110,16 @@ static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
|
|||
|
||||
#define DRIVER_NAME "bfin_sir"
|
||||
|
||||
static void bfin_sir_hw_init(void)
|
||||
static int bfin_sir_hw_init(void)
|
||||
{
|
||||
int ret = -ENODEV;
|
||||
#ifdef CONFIG_BFIN_SIR0
|
||||
peripheral_request(P_UART0_TX, DRIVER_NAME);
|
||||
peripheral_request(P_UART0_RX, DRIVER_NAME);
|
||||
ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
|
||||
if (ret)
|
||||
return ret;
|
||||
#endif
|
||||
SSYNC();
|
||||
return ret;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -131,33 +131,6 @@
|
|||
#define SDRAM_CL CL_3
|
||||
#endif
|
||||
|
||||
#if (CONFIG_MEM_SIZE == 128)
|
||||
#define SDRAM_SIZE EB0_SZ_128
|
||||
#endif
|
||||
#if (CONFIG_MEM_SIZE == 64)
|
||||
#define SDRAM_SIZE EB0_SZ_64
|
||||
#endif
|
||||
#if ( CONFIG_MEM_SIZE == 32)
|
||||
#define SDRAM_SIZE EB0_SZ_32
|
||||
#endif
|
||||
#if (CONFIG_MEM_SIZE == 16)
|
||||
#define SDRAM_SIZE EB0_SZ_16
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 11)
|
||||
#define SDRAM_WIDTH EB0_CAW_11
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 10)
|
||||
#define SDRAM_WIDTH EB0_CAW_10
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 9)
|
||||
#define SDRAM_WIDTH EB0_CAW_9
|
||||
#endif
|
||||
#if (CONFIG_MEM_ADD_WIDTH == 8)
|
||||
#define SDRAM_WIDTH EB0_CAW_8
|
||||
#endif
|
||||
|
||||
#define mem_SDBCTL (SDRAM_WIDTH | SDRAM_SIZE | EB0_E)
|
||||
|
||||
/* Equation from section 17 (p17-46) of BF533 HRM */
|
||||
#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
|
||||
|
||||
|
|
|
|||
|
|
@ -6,8 +6,6 @@
|
|||
#define Elf_Shdr Elf32_Shdr
|
||||
#define Elf_Sym Elf32_Sym
|
||||
#define Elf_Ehdr Elf32_Ehdr
|
||||
#define FLG_CODE_IN_L1 0x10
|
||||
#define FLG_DATA_IN_L1 0x20
|
||||
|
||||
struct mod_arch_specific {
|
||||
Elf_Shdr *text_l1;
|
||||
|
|
@ -15,5 +13,8 @@ struct mod_arch_specific {
|
|||
Elf_Shdr *bss_a_l1;
|
||||
Elf_Shdr *data_b_l1;
|
||||
Elf_Shdr *bss_b_l1;
|
||||
Elf_Shdr *text_l2;
|
||||
Elf_Shdr *data_l2;
|
||||
Elf_Shdr *bss_l2;
|
||||
};
|
||||
#endif /* _ASM_BFIN_MODULE_H */
|
||||
|
|
|
|||
|
|
@ -112,7 +112,26 @@ unsigned long get_wchan(struct task_struct *p);
|
|||
static inline uint32_t __pure bfin_revid(void)
|
||||
{
|
||||
/* stored in the upper 4 bits */
|
||||
return bfin_read_CHIPID() >> 28;
|
||||
uint32_t revid = bfin_read_CHIPID() >> 28;
|
||||
|
||||
#ifdef CONFIG_BF52x
|
||||
/* ANOMALY_05000357
|
||||
* Incorrect Revision Number in DSPID Register
|
||||
*/
|
||||
if (revid == 0)
|
||||
switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) {
|
||||
case 0x0010:
|
||||
revid = 0;
|
||||
break;
|
||||
case 0x2796:
|
||||
revid = 1;
|
||||
break;
|
||||
default:
|
||||
revid = 0xFFFF;
|
||||
break;
|
||||
}
|
||||
#endif
|
||||
return revid;
|
||||
}
|
||||
|
||||
static inline uint32_t __pure bfin_compiled_revid(void)
|
||||
|
|
|
|||
Loading…
Reference in New Issue