netxen: fix error codes in for tools access

Use -EIO or -EINVAL as error codes, these can get passed up
to applications (tools).

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/netxen/netxen_nic_hw.c

@@ -332,7 +332,7 @@ netxen_pcie_sem_lock(struct netxen_adapter *adapter, int sem, u32 id_reg)
 		if (done == 1)
 			break;
 		if (++timeout >= NETXEN_PCIE_SEM_TIMEOUT)
-			return -1;
+			return -EIO;
 		msleep(1);
 	}
 
@@ -1083,7 +1083,7 @@ netxen_nic_pci_set_crbwindow_128M(struct netxen_adapter *adapter,
 }
 
 /*
- * Return -1 if off is not valid,
+ * Returns < 0 if off is not valid,
  *	 1 if window access is needed. 'off' is set to offset from
  *	   CRB space in 128M pci map
  *	 0 if no window access is needed. 'off' is set to 2M addr
@@ -1096,7 +1096,7 @@ netxen_nic_pci_get_crb_addr_2M(struct netxen_adapter *adapter, ulong *off)
 
 
 	if (*off >= NETXEN_CRB_MAX)
-		return -1;
+		return -EINVAL;
 
 	if (*off >= NETXEN_PCI_CAMQM && (*off < NETXEN_PCI_CAMQM_2M_END)) {
 		*off = (*off - NETXEN_PCI_CAMQM) + NETXEN_PCI_CAMQM_2M_BASE +
@@ -1105,7 +1105,7 @@ netxen_nic_pci_get_crb_addr_2M(struct netxen_adapter *adapter, ulong *off)
 	}
 
 	if (*off < NETXEN_PCI_CRBSPACE)
-		return -1;
+		return -EINVAL;
 
 	*off -= NETXEN_PCI_CRBSPACE;
 
@@ -1220,25 +1220,26 @@ netxen_nic_hw_write_wx_2M(struct netxen_adapter *adapter, ulong off, u32 data)
 
 	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off);
 
-	if (rv == -1) {
+	if (rv == 0) {
-		printk(KERN_ERR "%s: invalid offset: 0x%016lx\n",
+		writel(data, (void __iomem *)off);
-				__func__, off);
+		return 0;
-		dump_stack();
-		return -1;
 	}
 
-	if (rv == 1) {
+	if (rv > 0) {
+		/* indirect access */
 		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
 		crb_win_lock(adapter);
 		netxen_nic_pci_set_crbwindow_2M(adapter, &off);
 		writel(data, (void __iomem *)off);
 		crb_win_unlock(adapter);
 		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
-	} else
+		return 0;
-		writel(data, (void __iomem *)off);
+	}
 
-
+	dev_err(&adapter->pdev->dev,
-	return 0;
+			"%s: invalid offset: 0x%016lx\n", __func__, off);
+	dump_stack();
+	return -EIO;
 }
 
 static u32
@@ -1250,24 +1251,24 @@ netxen_nic_hw_read_wx_2M(struct netxen_adapter *adapter, ulong off)
 
 	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off);
 
-	if (rv == -1) {
+	if (rv == 0)
-		printk(KERN_ERR "%s: invalid offset: 0x%016lx\n",
+		return readl((void __iomem *)off);
-				__func__, off);
-		dump_stack();
-		return -1;
-	}
 
-	if (rv == 1) {
+	if (rv > 0) {
+		/* indirect access */
 		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
 		crb_win_lock(adapter);
 		netxen_nic_pci_set_crbwindow_2M(adapter, &off);
 		data = readl((void __iomem *)off);
 		crb_win_unlock(adapter);
 		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
-	} else
+		return data;
-		data = readl((void __iomem *)off);
+	}
 
-	return data;
+	dev_err(&adapter->pdev->dev,
+			"%s: invalid offset: 0x%016lx\n", __func__, off);
+	dump_stack();
+	return -1;
 }
 
 /* window 1 registers only */

drivers/net/netxen/netxen_nic_init.c

@@ -832,6 +832,12 @@ void netxen_request_firmware(struct netxen_adapter *adapter)
 		goto request_fw;
 	}
 
+	if (NX_IS_REVISION_P3P(adapter->ahw.revision_id)) {
+		/* No file firmware for the time being */
+		fw_type = NX_FLASH_ROMIMAGE;
+		goto done;
+	}
+
 	fw_type = netxen_p3_has_mn(adapter) ?
 		NX_P3_MN_ROMIMAGE : NX_P3_CT_ROMIMAGE;