diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c b/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c new file mode 100644 index 000000000000..1cce948a37fb --- /dev/null +++ b/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c @@ -0,0 +1,111 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ + +#include +#include +#include +#include + +/* LED object. */ + +/* LED_819xUsb routines. */ +/* Description: */ +/* Turn on LED according to LedPin specified. */ +void SwLedOn(struct adapter *padapter, struct LED_871x *pLed) +{ + u8 LedCfg; + + if (padapter->bSurpriseRemoved || padapter->bDriverStopped) + return; + LedCfg = rtw_read8(padapter, REG_LEDCFG2); + switch (pLed->LedPin) { + case LED_PIN_LED0: + rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0xf0)|BIT5|BIT6); /* SW control led0 on. */ + break; + case LED_PIN_LED1: + rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0x0f)|BIT5); /* SW control led1 on. */ + break; + default: + break; + } + pLed->bLedOn = true; +} + +/* Description: */ +/* Turn off LED according to LedPin specified. */ +void SwLedOff(struct adapter *padapter, struct LED_871x *pLed) +{ + u8 LedCfg; + struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter); + + if (padapter->bSurpriseRemoved || padapter->bDriverStopped) + goto exit; + + LedCfg = rtw_read8(padapter, REG_LEDCFG2);/* 0x4E */ + + switch (pLed->LedPin) { + case LED_PIN_LED0: + if (pHalData->bLedOpenDrain) { + /* Open-drain arrangement for controlling the LED) */ + LedCfg &= 0x90; /* Set to software control. */ + rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3)); + LedCfg = rtw_read8(padapter, REG_MAC_PINMUX_CFG); + LedCfg &= 0xFE; + rtw_write8(padapter, REG_MAC_PINMUX_CFG, LedCfg); + } else { + rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3|BIT5|BIT6)); + } + break; + case LED_PIN_LED1: + LedCfg &= 0x0f; /* Set to software control. */ + rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3)); + break; + default: + break; + } +exit: + pLed->bLedOn = false; +} + +/* Interface to manipulate LED objects. */ +/* Default LED behavior. */ + +/* Description: */ +/* Initialize all LED_871x objects. */ +void rtl8188eu_InitSwLeds(struct adapter *padapter) +{ + struct led_priv *pledpriv = &(padapter->ledpriv); + + pledpriv->LedControlHandler = LedControl871x; + + InitLed871x(padapter, &(pledpriv->SwLed0), LED_PIN_LED0); + + InitLed871x(padapter, &(pledpriv->SwLed1), LED_PIN_LED1); +} + +/* Description: */ +/* DeInitialize all LED_819xUsb objects. */ +void rtl8188eu_DeInitSwLeds(struct adapter *padapter) +{ + struct led_priv *ledpriv = &(padapter->ledpriv); + + DeInitLed871x(&(ledpriv->SwLed0)); + DeInitLed871x(&(ledpriv->SwLed1)); +} diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_recv.c b/drivers/staging/rtl8188eu/hal/rtl8188eu_recv.c new file mode 100644 index 000000000000..0f47b8918593 --- /dev/null +++ b/drivers/staging/rtl8188eu/hal/rtl8188eu_recv.c @@ -0,0 +1,138 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +#define _RTL8188EU_RECV_C_ +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +void rtl8188eu_init_recvbuf(struct adapter *padapter, struct recv_buf *precvbuf) +{ + precvbuf->transfer_len = 0; + + precvbuf->len = 0; + + precvbuf->ref_cnt = 0; + + if (precvbuf->pbuf) { + precvbuf->pdata = precvbuf->pbuf; + precvbuf->phead = precvbuf->pbuf; + precvbuf->ptail = precvbuf->pbuf; + precvbuf->pend = precvbuf->pdata + MAX_RECVBUF_SZ; + } +} + +int rtl8188eu_init_recv_priv(struct adapter *padapter) +{ + struct recv_priv *precvpriv = &padapter->recvpriv; + int i, res = _SUCCESS; + struct recv_buf *precvbuf; + + tasklet_init(&precvpriv->recv_tasklet, + (void(*)(unsigned long))rtl8188eu_recv_tasklet, + (unsigned long)padapter); + + /* init recv_buf */ + _rtw_init_queue(&precvpriv->free_recv_buf_queue); + + precvpriv->pallocated_recv_buf = rtw_zmalloc(NR_RECVBUFF * sizeof(struct recv_buf) + 4); + if (precvpriv->pallocated_recv_buf == NULL) { + res = _FAIL; + RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("alloc recv_buf fail!\n")); + goto exit; + } + _rtw_memset(precvpriv->pallocated_recv_buf, 0, NR_RECVBUFF * sizeof(struct recv_buf) + 4); + + precvpriv->precv_buf = (u8 *)N_BYTE_ALIGMENT((size_t)(precvpriv->pallocated_recv_buf), 4); + + + precvbuf = (struct recv_buf *)precvpriv->precv_buf; + + for (i = 0; i < NR_RECVBUFF; i++) { + _rtw_init_listhead(&precvbuf->list); + _rtw_spinlock_init(&precvbuf->recvbuf_lock); + precvbuf->alloc_sz = MAX_RECVBUF_SZ; + res = rtw_os_recvbuf_resource_alloc(padapter, precvbuf); + if (res == _FAIL) + break; + precvbuf->ref_cnt = 0; + precvbuf->adapter = padapter; + precvbuf++; + } + precvpriv->free_recv_buf_queue_cnt = NR_RECVBUFF; + skb_queue_head_init(&precvpriv->rx_skb_queue); + { + int i; + size_t tmpaddr = 0; + size_t alignment = 0; + struct sk_buff *pskb = NULL; + + skb_queue_head_init(&precvpriv->free_recv_skb_queue); + + for (i = 0; i < NR_PREALLOC_RECV_SKB; i++) { + pskb = __netdev_alloc_skb(padapter->pnetdev, MAX_RECVBUF_SZ + RECVBUFF_ALIGN_SZ, GFP_KERNEL); + if (pskb) { + pskb->dev = padapter->pnetdev; + tmpaddr = (size_t)pskb->data; + alignment = tmpaddr & (RECVBUFF_ALIGN_SZ-1); + skb_reserve(pskb, (RECVBUFF_ALIGN_SZ - alignment)); + + skb_queue_tail(&precvpriv->free_recv_skb_queue, pskb); + } + pskb = NULL; + } + } +exit: + return res; +} + +void rtl8188eu_free_recv_priv(struct adapter *padapter) +{ + int i; + struct recv_buf *precvbuf; + struct recv_priv *precvpriv = &padapter->recvpriv; + + precvbuf = (struct recv_buf *)precvpriv->precv_buf; + + for (i = 0; i < NR_RECVBUFF; i++) { + rtw_os_recvbuf_resource_free(padapter, precvbuf); + precvbuf++; + } + + kfree(precvpriv->pallocated_recv_buf); + + if (skb_queue_len(&precvpriv->rx_skb_queue)) + DBG_88E(KERN_WARNING "rx_skb_queue not empty\n"); + skb_queue_purge(&precvpriv->rx_skb_queue); + + + if (skb_queue_len(&precvpriv->free_recv_skb_queue)) + DBG_88E(KERN_WARNING "free_recv_skb_queue not empty, %d\n", skb_queue_len(&precvpriv->free_recv_skb_queue)); + + skb_queue_purge(&precvpriv->free_recv_skb_queue); +} diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c b/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c new file mode 100644 index 000000000000..bd8a9ae5d077 --- /dev/null +++ b/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c @@ -0,0 +1,706 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +#define _RTL8188E_XMIT_C_ +#include +#include +#include +#include +#include +#include + +s32 rtl8188eu_init_xmit_priv(struct adapter *adapt) +{ + struct xmit_priv *pxmitpriv = &adapt->xmitpriv; + + tasklet_init(&pxmitpriv->xmit_tasklet, + (void(*)(unsigned long))rtl8188eu_xmit_tasklet, + (unsigned long)adapt); + return _SUCCESS; +} + +void rtl8188eu_free_xmit_priv(struct adapter *adapt) +{ +} + +static u8 urb_zero_packet_chk(struct adapter *adapt, int sz) +{ + u8 set_tx_desc_offset; + struct hal_data_8188e *haldata = GET_HAL_DATA(adapt); + set_tx_desc_offset = (((sz + TXDESC_SIZE) % haldata->UsbBulkOutSize) == 0) ? 1 : 0; + + return set_tx_desc_offset; +} + +static void rtl8188eu_cal_txdesc_chksum(struct tx_desc *ptxdesc) +{ + u16 *usptr = (u16 *)ptxdesc; + u32 count = 16; /* (32 bytes / 2 bytes per XOR) => 16 times */ + u32 index; + u16 checksum = 0; + + /* Clear first */ + ptxdesc->txdw7 &= cpu_to_le32(0xffff0000); + + for (index = 0; index < count; index++) + checksum = checksum ^ le16_to_cpu(*(__le16 *)(usptr + index)); + ptxdesc->txdw7 |= cpu_to_le32(0x0000ffff & checksum); +} + +/* Description: In normal chip, we should send some packet to Hw which will be used by Fw */ +/* in FW LPS mode. The function is to fill the Tx descriptor of this packets, then */ +/* Fw can tell Hw to send these packet derectly. */ +void rtl8188e_fill_fake_txdesc(struct adapter *adapt, u8 *desc, u32 BufferLen, u8 ispspoll, u8 is_btqosnull) +{ + struct tx_desc *ptxdesc; + + /* Clear all status */ + ptxdesc = (struct tx_desc *)desc; + _rtw_memset(desc, 0, TXDESC_SIZE); + + /* offset 0 */ + ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG); /* own, bFirstSeg, bLastSeg; */ + + ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE+OFFSET_SZ)<txdw0 |= cpu_to_le32(BufferLen&0x0000ffff); /* Buffer size + command header */ + + /* offset 4 */ + ptxdesc->txdw1 |= cpu_to_le32((QSLT_MGNT<txdw1 |= cpu_to_le32(NAVUSEHDR); + } else { + ptxdesc->txdw4 |= cpu_to_le32(BIT(7)); /* Hw set sequence number */ + ptxdesc->txdw3 |= cpu_to_le32((8 << 28)); /* set bit3 to 1. Suugested by TimChen. 2009.12.29. */ + } + + if (is_btqosnull) + ptxdesc->txdw2 |= cpu_to_le32(BIT(23)); /* BT NULL */ + + /* offset 16 */ + ptxdesc->txdw4 |= cpu_to_le32(BIT(8));/* driver uses rate */ + + /* USB interface drop packet if the checksum of descriptor isn't correct. */ + /* Using this checksum can let hardware recovery from packet bulk out error (e.g. Cancel URC, Bulk out error.). */ + rtl8188eu_cal_txdesc_chksum(ptxdesc); +} + +static void fill_txdesc_sectype(struct pkt_attrib *pattrib, struct tx_desc *ptxdesc) +{ + if ((pattrib->encrypt > 0) && !pattrib->bswenc) { + switch (pattrib->encrypt) { + /* SEC_TYPE : 0:NO_ENC,1:WEP40/TKIP,2:WAPI,3:AES */ + case _WEP40_: + case _WEP104_: + ptxdesc->txdw1 |= cpu_to_le32((0x01<txdw2 |= cpu_to_le32(0x7 << AMPDU_DENSITY_SHT); + break; + case _TKIP_: + case _TKIP_WTMIC_: + ptxdesc->txdw1 |= cpu_to_le32((0x01<txdw2 |= cpu_to_le32(0x7 << AMPDU_DENSITY_SHT); + break; + case _AES_: + ptxdesc->txdw1 |= cpu_to_le32((0x03<txdw2 |= cpu_to_le32(0x7 << AMPDU_DENSITY_SHT); + break; + case _NO_PRIVACY_: + default: + break; + } + } +} + +static void fill_txdesc_vcs(struct pkt_attrib *pattrib, __le32 *pdw) +{ + switch (pattrib->vcs_mode) { + case RTS_CTS: + *pdw |= cpu_to_le32(RTS_EN); + break; + case CTS_TO_SELF: + *pdw |= cpu_to_le32(CTS_2_SELF); + break; + case NONE_VCS: + default: + break; + } + if (pattrib->vcs_mode) { + *pdw |= cpu_to_le32(HW_RTS_EN); + /* Set RTS BW */ + if (pattrib->ht_en) { + *pdw |= (pattrib->bwmode&HT_CHANNEL_WIDTH_40) ? cpu_to_le32(BIT(27)) : 0; + + if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_LOWER) + *pdw |= cpu_to_le32((0x01 << 28) & 0x30000000); + else if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_UPPER) + *pdw |= cpu_to_le32((0x02 << 28) & 0x30000000); + else if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE) + *pdw |= 0; + else + *pdw |= cpu_to_le32((0x03 << 28) & 0x30000000); + } + } +} + +static void fill_txdesc_phy(struct pkt_attrib *pattrib, __le32 *pdw) +{ + if (pattrib->ht_en) { + *pdw |= (pattrib->bwmode&HT_CHANNEL_WIDTH_40) ? cpu_to_le32(BIT(25)) : 0; + + if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_LOWER) + *pdw |= cpu_to_le32((0x01 << DATA_SC_SHT) & 0x003f0000); + else if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_UPPER) + *pdw |= cpu_to_le32((0x02 << DATA_SC_SHT) & 0x003f0000); + else if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE) + *pdw |= 0; + else + *pdw |= cpu_to_le32((0x03 << DATA_SC_SHT) & 0x003f0000); + } +} + +static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz, u8 bagg_pkt) +{ + int pull = 0; + uint qsel; + u8 data_rate, pwr_status, offset; + struct adapter *adapt = pxmitframe->padapter; + struct pkt_attrib *pattrib = &pxmitframe->attrib; + struct hal_data_8188e *haldata = GET_HAL_DATA(adapt); + struct tx_desc *ptxdesc = (struct tx_desc *)pmem; + struct mlme_ext_priv *pmlmeext = &adapt->mlmeextpriv; + struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); + int bmcst = IS_MCAST(pattrib->ra); + + if (adapt->registrypriv.mp_mode == 0) { + if ((!bagg_pkt) && (urb_zero_packet_chk(adapt, sz) == 0)) { + ptxdesc = (struct tx_desc *)(pmem+PACKET_OFFSET_SZ); + pull = 1; + } + } + + _rtw_memset(ptxdesc, 0, sizeof(struct tx_desc)); + + /* 4 offset 0 */ + ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG); + ptxdesc->txdw0 |= cpu_to_le32(sz & 0x0000ffff);/* update TXPKTSIZE */ + + offset = TXDESC_SIZE + OFFSET_SZ; + + ptxdesc->txdw0 |= cpu_to_le32(((offset) << OFFSET_SHT) & 0x00ff0000);/* 32 bytes for TX Desc */ + + if (bmcst) + ptxdesc->txdw0 |= cpu_to_le32(BMC); + + if (adapt->registrypriv.mp_mode == 0) { + if (!bagg_pkt) { + if ((pull) && (pxmitframe->pkt_offset > 0)) + pxmitframe->pkt_offset = pxmitframe->pkt_offset - 1; + } + } + + /* pkt_offset, unit:8 bytes padding */ + if (pxmitframe->pkt_offset > 0) + ptxdesc->txdw1 |= cpu_to_le32((pxmitframe->pkt_offset << 26) & 0x7c000000); + + /* driver uses rate */ + ptxdesc->txdw4 |= cpu_to_le32(USERATE);/* rate control always by driver */ + + if ((pxmitframe->frame_tag & 0x0f) == DATA_FRAMETAG) { + /* offset 4 */ + ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id & 0x3F); + + qsel = (uint)(pattrib->qsel & 0x0000001f); + ptxdesc->txdw1 |= cpu_to_le32((qsel << QSEL_SHT) & 0x00001f00); + + ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid << RATE_ID_SHT) & 0x000F0000); + + fill_txdesc_sectype(pattrib, ptxdesc); + + if (pattrib->ampdu_en) { + ptxdesc->txdw2 |= cpu_to_le32(AGG_EN);/* AGG EN */ + ptxdesc->txdw6 = cpu_to_le32(0x6666f800); + } else { + ptxdesc->txdw2 |= cpu_to_le32(AGG_BK);/* AGG BK */ + } + + /* offset 8 */ + + /* offset 12 */ + ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum << SEQ_SHT) & 0x0FFF0000); + + /* offset 16 , offset 20 */ + if (pattrib->qos_en) + ptxdesc->txdw4 |= cpu_to_le32(QOS);/* QoS */ + + /* offset 20 */ + if (pxmitframe->agg_num > 1) + ptxdesc->txdw5 |= cpu_to_le32((pxmitframe->agg_num << USB_TXAGG_NUM_SHT) & 0xFF000000); + + if ((pattrib->ether_type != 0x888e) && + (pattrib->ether_type != 0x0806) && + (pattrib->ether_type != 0x88b4) && + (pattrib->dhcp_pkt != 1)) { + /* Non EAP & ARP & DHCP type data packet */ + + fill_txdesc_vcs(pattrib, &ptxdesc->txdw4); + fill_txdesc_phy(pattrib, &ptxdesc->txdw4); + + ptxdesc->txdw4 |= cpu_to_le32(0x00000008);/* RTS Rate=24M */ + ptxdesc->txdw5 |= cpu_to_le32(0x0001ff00);/* DATA/RTS Rate FB LMT */ + + if (pattrib->ht_en) { + if (ODM_RA_GetShortGI_8188E(&haldata->odmpriv, pattrib->mac_id)) + ptxdesc->txdw5 |= cpu_to_le32(SGI);/* SGI */ + } + data_rate = ODM_RA_GetDecisionRate_8188E(&haldata->odmpriv, pattrib->mac_id); + ptxdesc->txdw5 |= cpu_to_le32(data_rate & 0x3F); + pwr_status = ODM_RA_GetHwPwrStatus_8188E(&haldata->odmpriv, pattrib->mac_id); + ptxdesc->txdw4 |= cpu_to_le32((pwr_status & 0x7) << PWR_STATUS_SHT); + } else { + /* EAP data packet and ARP packet and DHCP. */ + /* Use the 1M data rate to send the EAP/ARP packet. */ + /* This will maybe make the handshake smooth. */ + ptxdesc->txdw2 |= cpu_to_le32(AGG_BK);/* AGG BK */ + if (pmlmeinfo->preamble_mode == PREAMBLE_SHORT) + ptxdesc->txdw4 |= cpu_to_le32(BIT(24));/* DATA_SHORT */ + ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate)); + } + } else if ((pxmitframe->frame_tag&0x0f) == MGNT_FRAMETAG) { + /* offset 4 */ + ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id & 0x3f); + + qsel = (uint)(pattrib->qsel&0x0000001f); + ptxdesc->txdw1 |= cpu_to_le32((qsel << QSEL_SHT) & 0x00001f00); + + ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid << RATE_ID_SHT) & 0x000f0000); + + /* offset 8 */ + /* CCX-TXRPT ack for xmit mgmt frames. */ + if (pxmitframe->ack_report) + ptxdesc->txdw2 |= cpu_to_le32(BIT(19)); + + /* offset 12 */ + ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<txdw5 |= cpu_to_le32(RTY_LMT_EN);/* retry limit enable */ + if (pattrib->retry_ctrl) + ptxdesc->txdw5 |= cpu_to_le32(0x00180000);/* retry limit = 6 */ + else + ptxdesc->txdw5 |= cpu_to_le32(0x00300000);/* retry limit = 12 */ + + ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate)); + } else if ((pxmitframe->frame_tag&0x0f) == TXAGG_FRAMETAG) { + DBG_88E("pxmitframe->frame_tag == TXAGG_FRAMETAG\n"); + } else if (((pxmitframe->frame_tag&0x0f) == MP_FRAMETAG) && + (adapt->registrypriv.mp_mode == 1)) { + fill_txdesc_for_mp(adapt, ptxdesc); + } else { + DBG_88E("pxmitframe->frame_tag = %d\n", pxmitframe->frame_tag); + + /* offset 4 */ + ptxdesc->txdw1 |= cpu_to_le32((4) & 0x3f);/* CAM_ID(MAC_ID) */ + + ptxdesc->txdw1 |= cpu_to_le32((6 << RATE_ID_SHT) & 0x000f0000);/* raid */ + + /* offset 8 */ + + /* offset 12 */ + ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate)); + } + + /* 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS. */ + /* (1) The sequence number of each non-Qos frame / broadcast / multicast / */ + /* mgnt frame should be controled by Hw because Fw will also send null data */ + /* which we cannot control when Fw LPS enable. */ + /* --> default enable non-Qos data sequense number. 2010.06.23. by tynli. */ + /* (2) Enable HW SEQ control for beacon packet, because we use Hw beacon. */ + /* (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos packets. */ + /* 2010.06.23. Added by tynli. */ + if (!pattrib->qos_en) { + ptxdesc->txdw3 |= cpu_to_le32(EN_HWSEQ); /* Hw set sequence number */ + ptxdesc->txdw4 |= cpu_to_le32(HW_SSN); /* Hw set sequence number */ + } + + ODM_SetTxAntByTxInfo_88E(&haldata->odmpriv, pmem, pattrib->mac_id); + + rtl8188eu_cal_txdesc_chksum(ptxdesc); + _dbg_dump_tx_info(adapt, pxmitframe->frame_tag, ptxdesc); + return pull; +} + +/* for non-agg data frame or management frame */ +static s32 rtw_dump_xframe(struct adapter *adapt, struct xmit_frame *pxmitframe) +{ + s32 ret = _SUCCESS; + s32 inner_ret = _SUCCESS; + int t, sz, w_sz, pull = 0; + u8 *mem_addr; + u32 ff_hwaddr; + struct xmit_buf *pxmitbuf = pxmitframe->pxmitbuf; + struct pkt_attrib *pattrib = &pxmitframe->attrib; + struct xmit_priv *pxmitpriv = &adapt->xmitpriv; + struct security_priv *psecuritypriv = &adapt->securitypriv; + if ((pxmitframe->frame_tag == DATA_FRAMETAG) && + (pxmitframe->attrib.ether_type != 0x0806) && + (pxmitframe->attrib.ether_type != 0x888e) && + (pxmitframe->attrib.ether_type != 0x88b4) && + (pxmitframe->attrib.dhcp_pkt != 1)) + rtw_issue_addbareq_cmd(adapt, pxmitframe); + mem_addr = pxmitframe->buf_addr; + + RT_TRACE(_module_rtl871x_xmit_c_, _drv_info_, ("rtw_dump_xframe()\n")); + + for (t = 0; t < pattrib->nr_frags; t++) { + if (inner_ret != _SUCCESS && ret == _SUCCESS) + ret = _FAIL; + + if (t != (pattrib->nr_frags - 1)) { + RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ("pattrib->nr_frags=%d\n", pattrib->nr_frags)); + + sz = pxmitpriv->frag_len; + sz = sz - 4 - (psecuritypriv->sw_encrypt ? 0 : pattrib->icv_len); + } else { + /* no frag */ + sz = pattrib->last_txcmdsz; + } + + pull = update_txdesc(pxmitframe, mem_addr, sz, false); + + if (pull) { + mem_addr += PACKET_OFFSET_SZ; /* pull txdesc head */ + pxmitframe->buf_addr = mem_addr; + w_sz = sz + TXDESC_SIZE; + } else { + w_sz = sz + TXDESC_SIZE + PACKET_OFFSET_SZ; + } + ff_hwaddr = rtw_get_ff_hwaddr(pxmitframe); + + inner_ret = rtw_write_port(adapt, ff_hwaddr, w_sz, (unsigned char *)pxmitbuf); + + rtw_count_tx_stats(adapt, pxmitframe, sz); + + RT_TRACE(_module_rtl871x_xmit_c_, _drv_info_, ("rtw_write_port, w_sz=%d\n", w_sz)); + + mem_addr += w_sz; + + mem_addr = (u8 *)RND4(((size_t)(mem_addr))); + } + + rtw_free_xmitframe(pxmitpriv, pxmitframe); + + if (ret != _SUCCESS) + rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_UNKNOWN); + + return ret; +} + +static u32 xmitframe_need_length(struct xmit_frame *pxmitframe) +{ + struct pkt_attrib *pattrib = &pxmitframe->attrib; + + u32 len = 0; + + /* no consider fragement */ + len = pattrib->hdrlen + pattrib->iv_len + + SNAP_SIZE + sizeof(u16) + + pattrib->pktlen + + ((pattrib->bswenc) ? pattrib->icv_len : 0); + + if (pattrib->encrypt == _TKIP_) + len += 8; + + return len; +} + +s32 rtl8188eu_xmitframe_complete(struct adapter *adapt, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf) +{ + struct hal_data_8188e *haldata = GET_HAL_DATA(adapt); + struct xmit_frame *pxmitframe = NULL; + struct xmit_frame *pfirstframe = NULL; + + /* aggregate variable */ + struct hw_xmit *phwxmit; + struct sta_info *psta = NULL; + struct tx_servq *ptxservq = NULL; + + unsigned long irql; + struct list_head *xmitframe_plist = NULL, *xmitframe_phead = NULL; + + u32 pbuf; /* next pkt address */ + u32 pbuf_tail; /* last pkt tail */ + u32 len; /* packet length, except TXDESC_SIZE and PKT_OFFSET */ + + u32 bulksize = haldata->UsbBulkOutSize; + u8 desc_cnt; + u32 bulkptr; + + /* dump frame variable */ + u32 ff_hwaddr; + + RT_TRACE(_module_rtl8192c_xmit_c_, _drv_info_, ("+xmitframe_complete\n")); + + /* check xmitbuffer is ok */ + if (pxmitbuf == NULL) { + pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv); + if (pxmitbuf == NULL) + return false; + } + + /* 3 1. pick up first frame */ + do { + rtw_free_xmitframe(pxmitpriv, pxmitframe); + + pxmitframe = rtw_dequeue_xframe(pxmitpriv, pxmitpriv->hwxmits, pxmitpriv->hwxmit_entry); + if (pxmitframe == NULL) { + /* no more xmit frame, release xmit buffer */ + rtw_free_xmitbuf(pxmitpriv, pxmitbuf); + return false; + } + + pxmitframe->pxmitbuf = pxmitbuf; + pxmitframe->buf_addr = pxmitbuf->pbuf; + pxmitbuf->priv_data = pxmitframe; + + pxmitframe->agg_num = 1; /* alloc xmitframe should assign to 1. */ + pxmitframe->pkt_offset = 1; /* first frame of aggregation, reserve offset */ + + rtw_xmitframe_coalesce(adapt, pxmitframe->pkt, pxmitframe); + + /* always return ndis_packet after rtw_xmitframe_coalesce */ + rtw_os_xmit_complete(adapt, pxmitframe); + + break; + } while (1); + + /* 3 2. aggregate same priority and same DA(AP or STA) frames */ + pfirstframe = pxmitframe; + len = xmitframe_need_length(pfirstframe) + TXDESC_SIZE + (pfirstframe->pkt_offset*PACKET_OFFSET_SZ); + pbuf_tail = len; + pbuf = _RND8(pbuf_tail); + + /* check pkt amount in one bulk */ + desc_cnt = 0; + bulkptr = bulksize; + if (pbuf < bulkptr) { + desc_cnt++; + } else { + desc_cnt = 0; + bulkptr = ((pbuf / bulksize) + 1) * bulksize; /* round to next bulksize */ + } + + /* dequeue same priority packet from station tx queue */ + psta = pfirstframe->attrib.psta; + switch (pfirstframe->attrib.priority) { + case 1: + case 2: + ptxservq = &(psta->sta_xmitpriv.bk_q); + phwxmit = pxmitpriv->hwxmits + 3; + break; + case 4: + case 5: + ptxservq = &(psta->sta_xmitpriv.vi_q); + phwxmit = pxmitpriv->hwxmits + 1; + break; + case 6: + case 7: + ptxservq = &(psta->sta_xmitpriv.vo_q); + phwxmit = pxmitpriv->hwxmits; + break; + case 0: + case 3: + default: + ptxservq = &(psta->sta_xmitpriv.be_q); + phwxmit = pxmitpriv->hwxmits + 2; + break; + } + _enter_critical_bh(&pxmitpriv->lock, &irql); + + xmitframe_phead = get_list_head(&ptxservq->sta_pending); + xmitframe_plist = get_next(xmitframe_phead); + + while (!rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) { + pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list); + xmitframe_plist = get_next(xmitframe_plist); + + pxmitframe->agg_num = 0; /* not first frame of aggregation */ + pxmitframe->pkt_offset = 0; /* not first frame of aggregation, no need to reserve offset */ + + len = xmitframe_need_length(pxmitframe) + TXDESC_SIZE + (pxmitframe->pkt_offset*PACKET_OFFSET_SZ); + + if (_RND8(pbuf + len) > MAX_XMITBUF_SZ) { + pxmitframe->agg_num = 1; + pxmitframe->pkt_offset = 1; + break; + } + rtw_list_delete(&pxmitframe->list); + ptxservq->qcnt--; + phwxmit->accnt--; + + pxmitframe->buf_addr = pxmitbuf->pbuf + pbuf; + + rtw_xmitframe_coalesce(adapt, pxmitframe->pkt, pxmitframe); + /* always return ndis_packet after rtw_xmitframe_coalesce */ + rtw_os_xmit_complete(adapt, pxmitframe); + + /* (len - TXDESC_SIZE) == pxmitframe->attrib.last_txcmdsz */ + update_txdesc(pxmitframe, pxmitframe->buf_addr, pxmitframe->attrib.last_txcmdsz, true); + + /* don't need xmitframe any more */ + rtw_free_xmitframe(pxmitpriv, pxmitframe); + + /* handle pointer and stop condition */ + pbuf_tail = pbuf + len; + pbuf = _RND8(pbuf_tail); + + pfirstframe->agg_num++; + if (MAX_TX_AGG_PACKET_NUMBER == pfirstframe->agg_num) + break; + + if (pbuf < bulkptr) { + desc_cnt++; + if (desc_cnt == haldata->UsbTxAggDescNum) + break; + } else { + desc_cnt = 0; + bulkptr = ((pbuf / bulksize) + 1) * bulksize; + } + } /* end while (aggregate same priority and same DA(AP or STA) frames) */ + + if (_rtw_queue_empty(&ptxservq->sta_pending) == true) + rtw_list_delete(&ptxservq->tx_pending); + + _exit_critical_bh(&pxmitpriv->lock, &irql); + if ((pfirstframe->attrib.ether_type != 0x0806) && + (pfirstframe->attrib.ether_type != 0x888e) && + (pfirstframe->attrib.ether_type != 0x88b4) && + (pfirstframe->attrib.dhcp_pkt != 1)) + rtw_issue_addbareq_cmd(adapt, pfirstframe); + /* 3 3. update first frame txdesc */ + if ((pbuf_tail % bulksize) == 0) { + /* remove pkt_offset */ + pbuf_tail -= PACKET_OFFSET_SZ; + pfirstframe->buf_addr += PACKET_OFFSET_SZ; + pfirstframe->pkt_offset--; + } + + update_txdesc(pfirstframe, pfirstframe->buf_addr, pfirstframe->attrib.last_txcmdsz, true); + + /* 3 4. write xmit buffer to USB FIFO */ + ff_hwaddr = rtw_get_ff_hwaddr(pfirstframe); + rtw_write_port(adapt, ff_hwaddr, pbuf_tail, (u8 *)pxmitbuf); + + /* 3 5. update statisitc */ + pbuf_tail -= (pfirstframe->agg_num * TXDESC_SIZE); + pbuf_tail -= (pfirstframe->pkt_offset * PACKET_OFFSET_SZ); + + rtw_count_tx_stats(adapt, pfirstframe, pbuf_tail); + + rtw_free_xmitframe(pxmitpriv, pfirstframe); + + return true; +} + +static s32 xmitframe_direct(struct adapter *adapt, struct xmit_frame *pxmitframe) +{ + s32 res = _SUCCESS; + + res = rtw_xmitframe_coalesce(adapt, pxmitframe->pkt, pxmitframe); + if (res == _SUCCESS) + rtw_dump_xframe(adapt, pxmitframe); + else + DBG_88E("==> %s xmitframe_coalsece failed\n", __func__); + return res; +} + +/* + * Return + * true dump packet directly + * false enqueue packet + */ +static s32 pre_xmitframe(struct adapter *adapt, struct xmit_frame *pxmitframe) +{ + unsigned long irql; + s32 res; + struct xmit_buf *pxmitbuf = NULL; + struct xmit_priv *pxmitpriv = &adapt->xmitpriv; + struct pkt_attrib *pattrib = &pxmitframe->attrib; + struct mlme_priv *pmlmepriv = &adapt->mlmepriv; + + _enter_critical_bh(&pxmitpriv->lock, &irql); + + if (rtw_txframes_sta_ac_pending(adapt, pattrib) > 0) + goto enqueue; + + if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == true) + goto enqueue; + + pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv); + if (pxmitbuf == NULL) + goto enqueue; + + _exit_critical_bh(&pxmitpriv->lock, &irql); + + pxmitframe->pxmitbuf = pxmitbuf; + pxmitframe->buf_addr = pxmitbuf->pbuf; + pxmitbuf->priv_data = pxmitframe; + + if (xmitframe_direct(adapt, pxmitframe) != _SUCCESS) { + rtw_free_xmitbuf(pxmitpriv, pxmitbuf); + rtw_free_xmitframe(pxmitpriv, pxmitframe); + } + + return true; + +enqueue: + res = rtw_xmitframe_enqueue(adapt, pxmitframe); + _exit_critical_bh(&pxmitpriv->lock, &irql); + + if (res != _SUCCESS) { + RT_TRACE(_module_xmit_osdep_c_, _drv_err_, ("pre_xmitframe: enqueue xmitframe fail\n")); + rtw_free_xmitframe(pxmitpriv, pxmitframe); + + /* Trick, make the statistics correct */ + pxmitpriv->tx_pkts--; + pxmitpriv->tx_drop++; + return true; + } + + return false; +} + +s32 rtl8188eu_mgnt_xmit(struct adapter *adapt, struct xmit_frame *pmgntframe) +{ + return rtw_dump_xframe(adapt, pmgntframe); +} + +/* + * Return + * true dump packet directly ok + * false temporary can't transmit packets to hardware + */ +s32 rtl8188eu_hal_xmit(struct adapter *adapt, struct xmit_frame *pxmitframe) +{ + return pre_xmitframe(adapt, pxmitframe); +}