ARM: OMAP: Remove broken LCD driver for SX1
Recently the omap McBSP code was cleaned up to get rid of direct McBSP register tinkering by the drivers. Looks like lcd_sx1.c never got converted, and now it breaks builds. It seems the lcd_sx1.c driver is attempting SPI mode, but doing it in a different way compared to omap_mcbsp_set_spi_mode(). Remove the broken driver, patches welcome to add it back when done properly by patching both mcbsp.c and lcd_sx1.c. Cc: Vovan888@gmail.com Cc: linux-fbdev-devel@lists.sourceforge.net Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tony Lindgren
parent
13d428afc0
commit
7953031da4
|
|
@ -23,7 +23,6 @@ objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o
|
|||
objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
|
||||
objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
|
||||
objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
|
||||
objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o
|
||||
|
||||
omapfb-objs := $(objs-yy)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,327 +0,0 @@
|
|||
/*
|
||||
* LCD panel support for the Siemens SX1 mobile phone
|
||||
*
|
||||
* Current version : Vovan888@gmail.com, great help from FCA00000
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <mach/gpio.h>
|
||||
#include <mach/omapfb.h>
|
||||
#include <mach/mcbsp.h>
|
||||
#include <mach/mux.h>
|
||||
|
||||
/*
|
||||
* OMAP310 GPIO registers
|
||||
*/
|
||||
#define GPIO_DATA_INPUT 0xfffce000
|
||||
#define GPIO_DATA_OUTPUT 0xfffce004
|
||||
#define GPIO_DIR_CONTROL 0xfffce008
|
||||
#define GPIO_INT_CONTROL 0xfffce00c
|
||||
#define GPIO_INT_MASK 0xfffce010
|
||||
#define GPIO_INT_STATUS 0xfffce014
|
||||
#define GPIO_PIN_CONTROL 0xfffce018
|
||||
|
||||
|
||||
#define A_LCD_SSC_RD 3
|
||||
#define A_LCD_SSC_SD 7
|
||||
#define _A_LCD_RESET 9
|
||||
#define _A_LCD_SSC_CS 12
|
||||
#define _A_LCD_SSC_A0 13
|
||||
|
||||
#define DSP_REG 0xE1017024
|
||||
|
||||
const unsigned char INIT_1[12] = {
|
||||
0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00
|
||||
};
|
||||
|
||||
const unsigned char INIT_2[127] = {
|
||||
0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00,
|
||||
0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00,
|
||||
0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00,
|
||||
0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01,
|
||||
0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01,
|
||||
0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01,
|
||||
0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01,
|
||||
0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01,
|
||||
0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01,
|
||||
0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01,
|
||||
0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01,
|
||||
0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01,
|
||||
0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01,
|
||||
0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01,
|
||||
0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02,
|
||||
0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00
|
||||
};
|
||||
|
||||
const unsigned char INIT_3[15] = {
|
||||
0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59,
|
||||
0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF
|
||||
};
|
||||
|
||||
static void epson_sendbyte(int flag, unsigned char byte)
|
||||
{
|
||||
int i, shifter = 0x80;
|
||||
|
||||
if (!flag)
|
||||
gpio_set_value(_A_LCD_SSC_A0, 0);
|
||||
mdelay(2);
|
||||
gpio_set_value(A_LCD_SSC_RD, 1);
|
||||
|
||||
gpio_set_value(A_LCD_SSC_SD, flag);
|
||||
|
||||
OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
|
||||
OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
|
||||
for (i = 0; i < 8; i++) {
|
||||
OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
|
||||
gpio_set_value(A_LCD_SSC_SD, shifter & byte);
|
||||
OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
|
||||
shifter >>= 1;
|
||||
}
|
||||
gpio_set_value(_A_LCD_SSC_A0, 1);
|
||||
}
|
||||
|
||||
static void init_system(void)
|
||||
{
|
||||
omap_mcbsp_request(OMAP_MCBSP3);
|
||||
omap_mcbsp_stop(OMAP_MCBSP3);
|
||||
}
|
||||
|
||||
static void setup_GPIO(void)
|
||||
{
|
||||
/* new wave */
|
||||
gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd");
|
||||
gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd");
|
||||
gpio_request(_A_LCD_RESET, "lcd_reset");
|
||||
gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs");
|
||||
gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0");
|
||||
|
||||
/* set GPIOs to output, with initial data */
|
||||
gpio_direction_output(A_LCD_SSC_RD, 1);
|
||||
gpio_direction_output(A_LCD_SSC_SD, 0);
|
||||
gpio_direction_output(_A_LCD_RESET, 0);
|
||||
gpio_direction_output(_A_LCD_SSC_CS, 1);
|
||||
gpio_direction_output(_A_LCD_SSC_A0, 1);
|
||||
}
|
||||
|
||||
static void display_init(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
omap_cfg_reg(MCBSP3_CLKX);
|
||||
|
||||
mdelay(2);
|
||||
setup_GPIO();
|
||||
mdelay(2);
|
||||
|
||||
/* reset LCD */
|
||||
gpio_set_value(A_LCD_SSC_SD, 1);
|
||||
epson_sendbyte(0, 0x25);
|
||||
|
||||
gpio_set_value(_A_LCD_RESET, 0);
|
||||
mdelay(10);
|
||||
gpio_set_value(_A_LCD_RESET, 1);
|
||||
|
||||
gpio_set_value(_A_LCD_SSC_CS, 1);
|
||||
mdelay(2);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 0);
|
||||
|
||||
/* init LCD, phase 1 */
|
||||
epson_sendbyte(0, 0xCA);
|
||||
for (i = 0; i < 10; i++)
|
||||
epson_sendbyte(1, INIT_1[i]);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 1);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 0);
|
||||
|
||||
/* init LCD phase 2 */
|
||||
epson_sendbyte(0, 0xCB);
|
||||
for (i = 0; i < 125; i++)
|
||||
epson_sendbyte(1, INIT_2[i]);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 1);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 0);
|
||||
|
||||
/* init LCD phase 2a */
|
||||
epson_sendbyte(0, 0xCC);
|
||||
for (i = 0; i < 14; i++)
|
||||
epson_sendbyte(1, INIT_3[i]);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 1);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 0);
|
||||
|
||||
/* init LCD phase 3 */
|
||||
epson_sendbyte(0, 0xBC);
|
||||
epson_sendbyte(1, 0x08);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 1);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 0);
|
||||
|
||||
/* init LCD phase 4 */
|
||||
epson_sendbyte(0, 0x07);
|
||||
epson_sendbyte(1, 0x05);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 1);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 0);
|
||||
|
||||
/* init LCD phase 5 */
|
||||
epson_sendbyte(0, 0x94);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 1);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 0);
|
||||
|
||||
/* init LCD phase 6 */
|
||||
epson_sendbyte(0, 0xC6);
|
||||
epson_sendbyte(1, 0x80);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 1);
|
||||
mdelay(100); /* used to be 1000 */
|
||||
gpio_set_value(_A_LCD_SSC_CS, 0);
|
||||
|
||||
/* init LCD phase 7 */
|
||||
epson_sendbyte(0, 0x16);
|
||||
epson_sendbyte(1, 0x02);
|
||||
epson_sendbyte(1, 0x00);
|
||||
epson_sendbyte(1, 0xB1);
|
||||
epson_sendbyte(1, 0x00);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 1);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 0);
|
||||
|
||||
/* init LCD phase 8 */
|
||||
epson_sendbyte(0, 0x76);
|
||||
epson_sendbyte(1, 0x00);
|
||||
epson_sendbyte(1, 0x00);
|
||||
epson_sendbyte(1, 0xDB);
|
||||
epson_sendbyte(1, 0x00);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 1);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 0);
|
||||
|
||||
/* init LCD phase 9 */
|
||||
epson_sendbyte(0, 0xAF);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 1);
|
||||
}
|
||||
|
||||
static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void sx1_panel_cleanup(struct lcd_panel *panel)
|
||||
{
|
||||
}
|
||||
|
||||
static void sx1_panel_disable(struct lcd_panel *panel)
|
||||
{
|
||||
printk(KERN_INFO "SX1: LCD panel disable\n");
|
||||
sx1_setmmipower(0);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 1);
|
||||
|
||||
epson_sendbyte(0, 0x25);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 0);
|
||||
|
||||
epson_sendbyte(0, 0xAE);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 1);
|
||||
mdelay(100);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 0);
|
||||
|
||||
epson_sendbyte(0, 0x95);
|
||||
gpio_set_value(_A_LCD_SSC_CS, 1);
|
||||
}
|
||||
|
||||
static int sx1_panel_enable(struct lcd_panel *panel)
|
||||
{
|
||||
printk(KERN_INFO "lcd_sx1: LCD panel enable\n");
|
||||
init_system();
|
||||
display_init();
|
||||
|
||||
sx1_setmmipower(1);
|
||||
sx1_setbacklight(0x18);
|
||||
sx1_setkeylight (0x06);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static unsigned long sx1_panel_get_caps(struct lcd_panel *panel)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
struct lcd_panel sx1_panel = {
|
||||
.name = "sx1",
|
||||
.config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
|
||||
OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK |
|
||||
OMAP_LCDC_INV_OUTPUT_EN,
|
||||
|
||||
.x_res = 176,
|
||||
.y_res = 220,
|
||||
.data_lines = 16,
|
||||
.bpp = 16,
|
||||
.hsw = 5,
|
||||
.hfp = 5,
|
||||
.hbp = 5,
|
||||
.vsw = 2,
|
||||
.vfp = 1,
|
||||
.vbp = 1,
|
||||
.pixel_clock = 1500,
|
||||
|
||||
.init = sx1_panel_init,
|
||||
.cleanup = sx1_panel_cleanup,
|
||||
.enable = sx1_panel_enable,
|
||||
.disable = sx1_panel_disable,
|
||||
.get_caps = sx1_panel_get_caps,
|
||||
};
|
||||
|
||||
static int sx1_panel_probe(struct platform_device *pdev)
|
||||
{
|
||||
omapfb_register_panel(&sx1_panel);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sx1_panel_remove(struct platform_device *pdev)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sx1_panel_resume(struct platform_device *pdev)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
struct platform_driver sx1_panel_driver = {
|
||||
.probe = sx1_panel_probe,
|
||||
.remove = sx1_panel_remove,
|
||||
.suspend = sx1_panel_suspend,
|
||||
.resume = sx1_panel_resume,
|
||||
.driver = {
|
||||
.name = "lcd_sx1",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int sx1_panel_drv_init(void)
|
||||
{
|
||||
return platform_driver_register(&sx1_panel_driver);
|
||||
}
|
||||
|
||||
static void sx1_panel_drv_cleanup(void)
|
||||
{
|
||||
platform_driver_unregister(&sx1_panel_driver);
|
||||
}
|
||||
|
||||
module_init(sx1_panel_drv_init);
|
||||
module_exit(sx1_panel_drv_cleanup);
|
||||
Loading…
Reference in New Issue