hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

phy: bcm63xx-usbh: Add BCM63xx USBH driver 

Add BCM63xx USBH PHY driver for BMIPS.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Simon Arlott <simon@octiron.net>
Link: https://lore.kernel.org/r/20200720131209.1236590-3-noltari@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Álvaro Fernández Rojas 2020-07-20 15:12:09 +02:00 committed by Vinod Koul
parent 9600041210
commit 783f6d3dcf
3 changed files with 466 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
drivers/phy/broadcom/Kconfig
View File

@ -2,6 +2,14 @@
#
# Phy drivers for Broadcom platforms
#
config PHY_BCM63XX_USBH
tristate "BCM63xx USBH PHY driver"
depends on BMIPS_GENERIC || COMPILE_TEST
select GENERIC_PHY
help
Enable this to support the BCM63xx USBH PHY driver.
If unsure, say N.
config PHY_CYGNUS_PCIE
tristate "Broadcom Cygnus PCIe PHY driver"
depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)

1
drivers/phy/broadcom/Makefile
View File

@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PHY_BCM63XX_USBH) += phy-bcm63xx-usbh.o
obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o

457
drivers/phy/broadcom/phy-bcm63xx-usbh.c Normal file
View File

@ -0,0 +1,457 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* BCM6328 USBH PHY Controller Driver
*
* Copyright (C) 2020 Álvaro Fernández Rojas <noltari@gmail.com>
* Copyright (C) 2015 Simon Arlott
*
* Derived from bcm963xx_4.12L.06B_consumer/kernel/linux/arch/mips/bcm963xx/setup.c:
* Copyright (C) 2002 Broadcom Corporation
*
* Derived from OpenWrt patches:
* Copyright (C) 2013 Jonas Gorski <jonas.gorski@gmail.com>
* Copyright (C) 2013 Florian Fainelli <f.fainelli@gmail.com>
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
/* USBH control register offsets */
enum usbh_regs {
USBH_BRT_CONTROL1 = 0,
USBH_BRT_CONTROL2,
USBH_BRT_STATUS1,
USBH_BRT_STATUS2,
USBH_UTMI_CONTROL1,
#define USBH_UC1_DEV_MODE_SEL BIT(0)
USBH_TEST_PORT_CONTROL,
USBH_PLL_CONTROL1,
#define USBH_PLLC_REFCLKSEL_SHIFT 0
#define USBH_PLLC_REFCLKSEL_MASK (0x3 << USBH_PLLC_REFCLKSEL_SHIFT)
#define USBH_PLLC_CLKSEL_SHIFT 2
#define USBH_PLLC_CLKSEL_MASK (0x3 << USBH_PLLC_CLKSEL_MASK)
#define USBH_PLLC_XTAL_PWRDWNB BIT(4)
#define USBH_PLLC_PLL_PWRDWNB BIT(5)
#define USBH_PLLC_PLL_CALEN BIT(6)
#define USBH_PLLC_PHYPLL_BYP BIT(7)
#define USBH_PLLC_PLL_RESET BIT(8)
#define USBH_PLLC_PLL_IDDQ_PWRDN BIT(9)
#define USBH_PLLC_PLL_PWRDN_DELAY BIT(10)
#define USBH_6318_PLLC_PLL_SUSPEND_EN BIT(27)
#define USBH_6318_PLLC_PHYPLL_BYP BIT(29)
#define USBH_6318_PLLC_PLL_RESET BIT(30)
#define USBH_6318_PLLC_PLL_IDDQ_PWRDN BIT(31)
USBH_SWAP_CONTROL,
#define USBH_SC_OHCI_DATA_SWAP BIT(0)
#define USBH_SC_OHCI_ENDIAN_SWAP BIT(1)
#define USBH_SC_OHCI_LOGICAL_ADDR_EN BIT(2)
#define USBH_SC_EHCI_DATA_SWAP BIT(3)
#define USBH_SC_EHCI_ENDIAN_SWAP BIT(4)
#define USBH_SC_EHCI_LOGICAL_ADDR_EN BIT(5)
#define USBH_SC_USB_DEVICE_SEL BIT(6)
USBH_GENERIC_CONTROL,
#define USBH_GC_PLL_SUSPEND_EN BIT(1)
USBH_FRAME_ADJUST_VALUE,
USBH_SETUP,
#define USBH_S_IOC BIT(4)
#define USBH_S_IPP BIT(5)
USBH_MDIO,
USBH_MDIO32,
USBH_USB_SIM_CONTROL,
#define USBH_USC_LADDR_SEL BIT(5)
__USBH_ENUM_SIZE
};
struct bcm63xx_usbh_phy_variant {
/* Registers */
long regs[__USBH_ENUM_SIZE];
/* PLLC bits to set/clear for power on */
u32 power_pllc_clr;
u32 power_pllc_set;
/* Setup bits to set/clear for power on */
u32 setup_clr;
u32 setup_set;
/* Swap Control bits to set */
u32 swapctl_dev_set;
/* Test Port Control value to set if non-zero */
u32 tpc_val;
/* USB Sim Control bits to set */
u32 usc_set;
/* UTMI Control 1 bits to set */
u32 utmictl1_dev_set;
};
struct bcm63xx_usbh_phy {
void __iomem *base;
struct clk *usbh_clk;
struct clk *usb_ref_clk;
struct reset_control *reset;
const struct bcm63xx_usbh_phy_variant *variant;
bool device_mode;
};
static const struct bcm63xx_usbh_phy_variant usbh_bcm6318 = {
.regs = {
[USBH_BRT_CONTROL1] = -1,
[USBH_BRT_CONTROL2] = -1,
[USBH_BRT_STATUS1] = -1,
[USBH_BRT_STATUS2] = -1,
[USBH_UTMI_CONTROL1] = 0x2c,
[USBH_TEST_PORT_CONTROL] = 0x1c,
[USBH_PLL_CONTROL1] = 0x04,
[USBH_SWAP_CONTROL] = 0x0c,
[USBH_GENERIC_CONTROL] = -1,
[USBH_FRAME_ADJUST_VALUE] = 0x08,
[USBH_SETUP] = 0x00,
[USBH_MDIO] = 0x14,
[USBH_MDIO32] = 0x18,
[USBH_USB_SIM_CONTROL] = 0x20,
},
.power_pllc_clr = USBH_6318_PLLC_PLL_IDDQ_PWRDN,
.power_pllc_set = USBH_6318_PLLC_PLL_SUSPEND_EN,
.setup_set = USBH_S_IOC,
.swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
.usc_set = USBH_USC_LADDR_SEL,
.utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
};
static const struct bcm63xx_usbh_phy_variant usbh_bcm6328 = {
.regs = {
[USBH_BRT_CONTROL1] = 0x00,
[USBH_BRT_CONTROL2] = 0x04,
[USBH_BRT_STATUS1] = 0x08,
[USBH_BRT_STATUS2] = 0x0c,
[USBH_UTMI_CONTROL1] = 0x10,
[USBH_TEST_PORT_CONTROL] = 0x14,
[USBH_PLL_CONTROL1] = 0x18,
[USBH_SWAP_CONTROL] = 0x1c,
[USBH_GENERIC_CONTROL] = 0x20,
[USBH_FRAME_ADJUST_VALUE] = 0x24,
[USBH_SETUP] = 0x28,
[USBH_MDIO] = 0x2c,
[USBH_MDIO32] = 0x30,
[USBH_USB_SIM_CONTROL] = 0x34,
},
.setup_set = USBH_S_IOC,
.swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
.utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
};
static const struct bcm63xx_usbh_phy_variant usbh_bcm6358 = {
.regs = {
[USBH_BRT_CONTROL1] = -1,
[USBH_BRT_CONTROL2] = -1,
[USBH_BRT_STATUS1] = -1,
[USBH_BRT_STATUS2] = -1,
[USBH_UTMI_CONTROL1] = -1,
[USBH_TEST_PORT_CONTROL] = 0x24,
[USBH_PLL_CONTROL1] = -1,
[USBH_SWAP_CONTROL] = 0x00,
[USBH_GENERIC_CONTROL] = -1,
[USBH_FRAME_ADJUST_VALUE] = -1,
[USBH_SETUP] = -1,
[USBH_MDIO] = -1,
[USBH_MDIO32] = -1,
[USBH_USB_SIM_CONTROL] = -1,
},
/*
* The magic value comes for the original vendor BSP
* and is needed for USB to work. Datasheet does not
* help, so the magic value is used as-is.
*/
.tpc_val = 0x1c0020,
};
static const struct bcm63xx_usbh_phy_variant usbh_bcm6368 = {
.regs = {
[USBH_BRT_CONTROL1] = 0x00,
[USBH_BRT_CONTROL2] = 0x04,
[USBH_BRT_STATUS1] = 0x08,
[USBH_BRT_STATUS2] = 0x0c,
[USBH_UTMI_CONTROL1] = 0x10,
[USBH_TEST_PORT_CONTROL] = 0x14,
[USBH_PLL_CONTROL1] = 0x18,
[USBH_SWAP_CONTROL] = 0x1c,
[USBH_GENERIC_CONTROL] = -1,
[USBH_FRAME_ADJUST_VALUE] = 0x24,
[USBH_SETUP] = 0x28,
[USBH_MDIO] = 0x2c,
[USBH_MDIO32] = 0x30,
[USBH_USB_SIM_CONTROL] = 0x34,
},
.power_pllc_clr = USBH_PLLC_PLL_IDDQ_PWRDN | USBH_PLLC_PLL_PWRDN_DELAY,
.setup_set = USBH_S_IOC,
.swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
.utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
};
static const struct bcm63xx_usbh_phy_variant usbh_bcm63268 = {
.regs = {
[USBH_BRT_CONTROL1] = 0x00,
[USBH_BRT_CONTROL2] = 0x04,
[USBH_BRT_STATUS1] = 0x08,
[USBH_BRT_STATUS2] = 0x0c,
[USBH_UTMI_CONTROL1] = 0x10,
[USBH_TEST_PORT_CONTROL] = 0x14,
[USBH_PLL_CONTROL1] = 0x18,
[USBH_SWAP_CONTROL] = 0x1c,
[USBH_GENERIC_CONTROL] = 0x20,
[USBH_FRAME_ADJUST_VALUE] = 0x24,
[USBH_SETUP] = 0x28,
[USBH_MDIO] = 0x2c,
[USBH_MDIO32] = 0x30,
[USBH_USB_SIM_CONTROL] = 0x34,
},
.power_pllc_clr = USBH_PLLC_PLL_IDDQ_PWRDN | USBH_PLLC_PLL_PWRDN_DELAY,
.setup_clr = USBH_S_IPP,
.setup_set = USBH_S_IOC,
.swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
.utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
};
static inline bool usbh_has_reg(struct bcm63xx_usbh_phy *usbh, int reg)
{
return (usbh->variant->regs[reg] >= 0);
}
static inline u32 usbh_readl(struct bcm63xx_usbh_phy *usbh, int reg)
{
return __raw_readl(usbh->base + usbh->variant->regs[reg]);
}
static inline void usbh_writel(struct bcm63xx_usbh_phy *usbh, int reg,
u32 value)
{
__raw_writel(value, usbh->base + usbh->variant->regs[reg]);
}
static int bcm63xx_usbh_phy_init(struct phy *phy)
{
struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
int ret;
ret = clk_prepare_enable(usbh->usbh_clk);
if (ret) {
dev_err(&phy->dev, "unable to enable usbh clock: %d\n", ret);
return ret;
}
ret = clk_prepare_enable(usbh->usb_ref_clk);
if (ret) {
dev_err(&phy->dev, "unable to enable usb_ref clock: %d\n", ret);
clk_disable_unprepare(usbh->usbh_clk);
return ret;
}
ret = reset_control_reset(usbh->reset);
if (ret) {
dev_err(&phy->dev, "unable to reset device: %d\n", ret);
clk_disable_unprepare(usbh->usb_ref_clk);
clk_disable_unprepare(usbh->usbh_clk);
return ret;
}
/* Configure to work in native CPU endian */
if (usbh_has_reg(usbh, USBH_SWAP_CONTROL)) {
u32 val = usbh_readl(usbh, USBH_SWAP_CONTROL);
val |= USBH_SC_EHCI_DATA_SWAP;
val &= ~USBH_SC_EHCI_ENDIAN_SWAP;
val |= USBH_SC_OHCI_DATA_SWAP;
val &= ~USBH_SC_OHCI_ENDIAN_SWAP;
if (usbh->device_mode && usbh->variant->swapctl_dev_set)
val |= usbh->variant->swapctl_dev_set;
usbh_writel(usbh, USBH_SWAP_CONTROL, val);
}
if (usbh_has_reg(usbh, USBH_SETUP)) {
u32 val = usbh_readl(usbh, USBH_SETUP);
val |= usbh->variant->setup_set;
val &= ~usbh->variant->setup_clr;
usbh_writel(usbh, USBH_SETUP, val);
}
if (usbh_has_reg(usbh, USBH_USB_SIM_CONTROL)) {
u32 val = usbh_readl(usbh, USBH_USB_SIM_CONTROL);
val |= usbh->variant->usc_set;
usbh_writel(usbh, USBH_USB_SIM_CONTROL, val);
}
if (usbh->variant->tpc_val &&
usbh_has_reg(usbh, USBH_TEST_PORT_CONTROL))
usbh_writel(usbh, USBH_TEST_PORT_CONTROL,
usbh->variant->tpc_val);
if (usbh->device_mode &&
usbh_has_reg(usbh, USBH_UTMI_CONTROL1) &&
usbh->variant->utmictl1_dev_set) {
u32 val = usbh_readl(usbh, USBH_UTMI_CONTROL1);
val |= usbh->variant->utmictl1_dev_set;
usbh_writel(usbh, USBH_UTMI_CONTROL1, val);
}
return 0;
}
static int bcm63xx_usbh_phy_power_on(struct phy *phy)
{
struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
if (usbh_has_reg(usbh, USBH_PLL_CONTROL1)) {
u32 val = usbh_readl(usbh, USBH_PLL_CONTROL1);
val |= usbh->variant->power_pllc_set;
val &= ~usbh->variant->power_pllc_clr;
usbh_writel(usbh, USBH_PLL_CONTROL1, val);
}
return 0;
}
static int bcm63xx_usbh_phy_power_off(struct phy *phy)
{
struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
if (usbh_has_reg(usbh, USBH_PLL_CONTROL1)) {
u32 val = usbh_readl(usbh, USBH_PLL_CONTROL1);
val &= ~usbh->variant->power_pllc_set;
val |= usbh->variant->power_pllc_clr;
usbh_writel(usbh, USBH_PLL_CONTROL1, val);
}
return 0;
}
static int bcm63xx_usbh_phy_exit(struct phy *phy)
{
struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
clk_disable_unprepare(usbh->usbh_clk);
clk_disable_unprepare(usbh->usb_ref_clk);
return 0;
}
static const struct phy_ops bcm63xx_usbh_phy_ops = {
.exit = bcm63xx_usbh_phy_exit,
.init = bcm63xx_usbh_phy_init,
.power_off = bcm63xx_usbh_phy_power_off,
.power_on = bcm63xx_usbh_phy_power_on,
.owner = THIS_MODULE,
};
static struct phy *bcm63xx_usbh_phy_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct bcm63xx_usbh_phy *usbh = dev_get_drvdata(dev);
usbh->device_mode = !!args->args[0];
return of_phy_simple_xlate(dev, args);
}
static int __init bcm63xx_usbh_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct bcm63xx_usbh_phy *usbh;
const struct bcm63xx_usbh_phy_variant *variant;
struct phy *phy;
struct phy_provider *phy_provider;
usbh = devm_kzalloc(dev, sizeof(*usbh), GFP_KERNEL);
if (!usbh)
return -ENOMEM;
variant = device_get_match_data(dev);
if (!variant)
return -EINVAL;
usbh->variant = variant;
usbh->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(usbh->base))
return PTR_ERR(usbh->base);
usbh->reset = devm_reset_control_get_exclusive(dev, NULL);
if (IS_ERR(usbh->reset)) {
if (PTR_ERR(usbh->reset) != -EPROBE_DEFER)
dev_err(dev, "failed to get reset\n");
return PTR_ERR(usbh->reset);
}
usbh->usbh_clk = devm_clk_get_optional(dev, "usbh");
if (IS_ERR(usbh->usbh_clk))
return PTR_ERR(usbh->usbh_clk);
usbh->usb_ref_clk = devm_clk_get_optional(dev, "usb_ref");
if (IS_ERR(usbh->usb_ref_clk))
return PTR_ERR(usbh->usb_ref_clk);
phy = devm_phy_create(dev, NULL, &bcm63xx_usbh_phy_ops);
if (IS_ERR(phy)) {
dev_err(dev, "failed to create PHY\n");
return PTR_ERR(phy);
}
platform_set_drvdata(pdev, usbh);
phy_set_drvdata(phy, usbh);
phy_provider = devm_of_phy_provider_register(dev,
bcm63xx_usbh_phy_xlate);
if (IS_ERR(phy_provider)) {
dev_err(dev, "failed to register PHY provider\n");
return PTR_ERR(phy_provider);
}
dev_dbg(dev, "Registered BCM63xx USB PHY driver\n");
return 0;
}
static const struct of_device_id bcm63xx_usbh_phy_ids[] __initconst = {
{ .compatible = "brcm,bcm6318-usbh-phy", .data = &usbh_bcm6318 },
{ .compatible = "brcm,bcm6328-usbh-phy", .data = &usbh_bcm6328 },
{ .compatible = "brcm,bcm6358-usbh-phy", .data = &usbh_bcm6358 },
{ .compatible = "brcm,bcm6362-usbh-phy", .data = &usbh_bcm6368 },
{ .compatible = "brcm,bcm6368-usbh-phy", .data = &usbh_bcm6368 },
{ .compatible = "brcm,bcm63268-usbh-phy", .data = &usbh_bcm63268 },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, bcm63xx_usbh_phy_ids);
static struct platform_driver bcm63xx_usbh_phy_driver __refdata = {
.driver = {
.name = "bcm63xx-usbh-phy",
.of_match_table = bcm63xx_usbh_phy_ids,
},
.probe = bcm63xx_usbh_phy_probe,
};
module_platform_driver(bcm63xx_usbh_phy_driver);
MODULE_DESCRIPTION("BCM63xx USBH PHY driver");
MODULE_AUTHOR("Álvaro Fernández Rojas <noltari@gmail.com>");
MODULE_AUTHOR("Simon Arlott");
MODULE_LICENSE("GPL");