diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index e129c820df7d..92144ed1ad46 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -286,6 +286,7 @@ config TWL6040_CORE depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE select REGMAP_I2C + select IRQ_DOMAIN default n help Say yes here if you want support for Texas Instruments TWL6040 audio diff --git a/drivers/mfd/ab5500-core.h b/drivers/mfd/ab5500-core.h deleted file mode 100644 index 63b30b17e4f3..000000000000 --- a/drivers/mfd/ab5500-core.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright (C) 2011 ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * Shared definitions and data structures for the AB5500 MFD driver - */ - -/* Read/write operation values. */ -#define AB5500_PERM_RD (0x01) -#define AB5500_PERM_WR (0x02) - -/* Read/write permissions. */ -#define AB5500_PERM_RO (AB5500_PERM_RD) -#define AB5500_PERM_RW (AB5500_PERM_RD | AB5500_PERM_WR) - -#define AB5500_MASK_BASE (0x60) -#define AB5500_MASK_END (0x79) -#define AB5500_CHIP_ID (0x20) - -/** - * struct ab5500_reg_range - * @first: the first address of the range - * @last: the last address of the range - * @perm: access permissions for the range - */ -struct ab5500_reg_range { - u8 first; - u8 last; - u8 perm; -}; - -/** - * struct ab5500_i2c_ranges - * @count: the number of ranges in the list - * @range: the list of register ranges - */ -struct ab5500_i2c_ranges { - u8 nranges; - u8 bankid; - const struct ab5500_reg_range *range; -}; - -/** - * struct ab5500_i2c_banks - * @count: the number of ranges in the list - * @range: the list of register ranges - */ -struct ab5500_i2c_banks { - u8 nbanks; - const struct ab5500_i2c_ranges *bank; -}; - -/** - * struct ab5500_bank - * @slave_addr: I2C slave_addr found in AB5500 specification - * @name: Documentation name of the bank. For reference - */ -struct ab5500_bank { - u8 slave_addr; - const char *name; -}; - -static const struct ab5500_bank bankinfo[AB5500_NUM_BANKS] = { - [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = { - AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP, "VIT_IO_I2C_CLK_TST_OTP"}, - [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = { - AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST, "VDDDIG_IO_I2C_CLK_TST"}, - [AB5500_BANK_VDENC] = {AB5500_ADDR_VDENC, "VDENC"}, - [AB5500_BANK_SIM_USBSIM] = {AB5500_ADDR_SIM_USBSIM, "SIM_USBSIM"}, - [AB5500_BANK_LED] = {AB5500_ADDR_LED, "LED"}, - [AB5500_BANK_ADC] = {AB5500_ADDR_ADC, "ADC"}, - [AB5500_BANK_RTC] = {AB5500_ADDR_RTC, "RTC"}, - [AB5500_BANK_STARTUP] = {AB5500_ADDR_STARTUP, "STARTUP"}, - [AB5500_BANK_DBI_ECI] = {AB5500_ADDR_DBI_ECI, "DBI-ECI"}, - [AB5500_BANK_CHG] = {AB5500_ADDR_CHG, "CHG"}, - [AB5500_BANK_FG_BATTCOM_ACC] = { - AB5500_ADDR_FG_BATTCOM_ACC, "FG_BATCOM_ACC"}, - [AB5500_BANK_USB] = {AB5500_ADDR_USB, "USB"}, - [AB5500_BANK_IT] = {AB5500_ADDR_IT, "IT"}, - [AB5500_BANK_VIBRA] = {AB5500_ADDR_VIBRA, "VIBRA"}, - [AB5500_BANK_AUDIO_HEADSETUSB] = { - AB5500_ADDR_AUDIO_HEADSETUSB, "AUDIO_HEADSETUSB"}, -}; - -int ab5500_get_register_interruptible_raw(struct ab5500 *ab, u8 bank, u8 reg, - u8 *value); -int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank, - u8 reg, u8 bitmask, u8 bitvalues); diff --git a/drivers/mfd/mc13xxx-spi.c b/drivers/mfd/mc13xxx-spi.c index 3fcdab3eb8eb..03df422feb76 100644 --- a/drivers/mfd/mc13xxx-spi.c +++ b/drivers/mfd/mc13xxx-spi.c @@ -49,10 +49,72 @@ static struct regmap_config mc13xxx_regmap_spi_config = { .reg_bits = 7, .pad_bits = 1, .val_bits = 24, + .write_flag_mask = 0x80, .max_register = MC13XXX_NUMREGS, .cache_type = REGCACHE_NONE, + .use_single_rw = 1, +}; + +static int mc13xxx_spi_read(void *context, const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + unsigned char w[4] = { *((unsigned char *) reg), 0, 0, 0}; + unsigned char r[4]; + unsigned char *p = val; + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + struct spi_transfer t = { + .tx_buf = w, + .rx_buf = r, + .len = 4, + }; + + struct spi_message m; + int ret; + + if (val_size != 3 || reg_size != 1) + return -ENOTSUPP; + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + ret = spi_sync(spi, &m); + + memcpy(p, &r[1], 3); + + return ret; +} + +static int mc13xxx_spi_write(void *context, const void *data, size_t count) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + + if (count != 4) + return -ENOTSUPP; + + return spi_write(spi, data, count); +} + +/* + * We cannot use regmap-spi generic bus implementation here. + * The MC13783 chip will get corrupted if CS signal is deasserted + * and on i.Mx31 SoC (the target SoC for MC13783 PMIC) the SPI controller + * has the following errata (DSPhl22960): + * "The CSPI negates SS when the FIFO becomes empty with + * SSCTL= 0. Software cannot guarantee that the FIFO will not + * drain because of higher priority interrupts and the + * non-realtime characteristics of the operating system. As a + * result, the SS will negate before all of the data has been + * transferred to/from the peripheral." + * We workaround this by accessing the SPI controller with a + * single transfert. + */ + +static struct regmap_bus regmap_mc13xxx_bus = { + .write = mc13xxx_spi_write, + .read = mc13xxx_spi_read, }; static int mc13xxx_spi_probe(struct spi_device *spi) @@ -73,12 +135,13 @@ static int mc13xxx_spi_probe(struct spi_device *spi) dev_set_drvdata(&spi->dev, mc13xxx); spi->mode = SPI_MODE_0 | SPI_CS_HIGH; - spi->bits_per_word = 32; mc13xxx->dev = &spi->dev; mutex_init(&mc13xxx->lock); - mc13xxx->regmap = regmap_init_spi(spi, &mc13xxx_regmap_spi_config); + mc13xxx->regmap = regmap_init(&spi->dev, ®map_mc13xxx_bus, &spi->dev, + &mc13xxx_regmap_spi_config); + if (IS_ERR(mc13xxx->regmap)) { ret = PTR_ERR(mc13xxx->regmap); dev_err(mc13xxx->dev, "Failed to initialize register map: %d\n", diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 7e96bb229724..41088ecbb2a9 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -500,8 +501,21 @@ static void omap_usbhs_init(struct device *dev) dev_dbg(dev, "starting TI HSUSB Controller\n"); pm_runtime_get_sync(dev); - spin_lock_irqsave(&omap->lock, flags); + if (pdata->ehci_data->phy_reset) { + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) + gpio_request_one(pdata->ehci_data->reset_gpio_port[0], + GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); + + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) + gpio_request_one(pdata->ehci_data->reset_gpio_port[1], + GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); + + /* Hold the PHY in RESET for enough time till DIR is high */ + udelay(10); + } + + spin_lock_irqsave(&omap->lock, flags); omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); @@ -581,9 +595,39 @@ static void omap_usbhs_init(struct device *dev) } spin_unlock_irqrestore(&omap->lock, flags); + + if (pdata->ehci_data->phy_reset) { + /* Hold the PHY in RESET for enough time till + * PHY is settled and ready + */ + udelay(10); + + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) + gpio_set_value_cansleep + (pdata->ehci_data->reset_gpio_port[0], 1); + + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) + gpio_set_value_cansleep + (pdata->ehci_data->reset_gpio_port[1], 1); + } + pm_runtime_put_sync(dev); } +static void omap_usbhs_deinit(struct device *dev) +{ + struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); + struct usbhs_omap_platform_data *pdata = &omap->platdata; + + if (pdata->ehci_data->phy_reset) { + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) + gpio_free(pdata->ehci_data->reset_gpio_port[0]); + + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) + gpio_free(pdata->ehci_data->reset_gpio_port[1]); + } +} + /** * usbhs_omap_probe - initialize TI-based HCDs @@ -767,6 +811,7 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev) goto end_probe; err_alloc: + omap_usbhs_deinit(&pdev->dev); iounmap(omap->tll_base); err_tll: @@ -818,6 +863,7 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev) { struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev); + omap_usbhs_deinit(&pdev->dev); iounmap(omap->tll_base); iounmap(omap->uhh_base); clk_put(omap->init_60m_fclk); diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c index 00c0aba7eba0..c4a69f193a1d 100644 --- a/drivers/mfd/palmas.c +++ b/drivers/mfd/palmas.c @@ -356,7 +356,14 @@ static int __devinit palmas_i2c_probe(struct i2c_client *i2c, } } - ret = regmap_add_irq_chip(palmas->regmap[1], palmas->irq, + /* Change IRQ into clear on read mode for efficiency */ + slave = PALMAS_BASE_TO_SLAVE(PALMAS_INTERRUPT_BASE); + addr = PALMAS_BASE_TO_REG(PALMAS_INTERRUPT_BASE, PALMAS_INT_CTRL); + reg = PALMAS_INT_CTRL_INT_CLEAR; + + regmap_write(palmas->regmap[slave], addr, reg); + + ret = regmap_add_irq_chip(palmas->regmap[slave], palmas->irq, IRQF_ONESHOT | IRQF_TRIGGER_LOW, -1, &palmas_irq_chip, &palmas->irq_data); if (ret < 0) @@ -441,6 +448,9 @@ static int __devinit palmas_i2c_probe(struct i2c_client *i2c, goto err; } + children[PALMAS_PMIC_ID].platform_data = pdata->pmic_pdata; + children[PALMAS_PMIC_ID].pdata_size = sizeof(*pdata->pmic_pdata); + ret = mfd_add_devices(palmas->dev, -1, children, ARRAY_SIZE(palmas_children), NULL, regmap_irq_chip_get_base(palmas->irq_data)); @@ -472,6 +482,7 @@ static const struct i2c_device_id palmas_i2c_id[] = { { "twl6035", }, { "twl6037", }, { "tps65913", }, + { /* end */ } }; MODULE_DEVICE_TABLE(i2c, palmas_i2c_id); diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 17cfb8a1131c..c30435499a02 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -281,14 +281,13 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) } } + /* Hold PHYs in reset while initializing EHCI controller */ if (pdata->phy_reset) { if (gpio_is_valid(pdata->reset_gpio_port[0])) - gpio_request_one(pdata->reset_gpio_port[0], - GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); + gpio_set_value_cansleep(pdata->reset_gpio_port[0], 0); if (gpio_is_valid(pdata->reset_gpio_port[1])) - gpio_request_one(pdata->reset_gpio_port[1], - GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); + gpio_set_value_cansleep(pdata->reset_gpio_port[1], 0); /* Hold the PHY in RESET for enough time till DIR is high */ udelay(10); @@ -330,6 +329,11 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params); ehci_reset(omap_ehci); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) { + dev_err(dev, "failed to add hcd with err %d\n", ret); + goto err_add_hcd; + } if (pdata->phy_reset) { /* Hold the PHY in RESET for enough time till @@ -344,12 +348,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1); } - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret) { - dev_err(dev, "failed to add hcd with err %d\n", ret); - goto err_add_hcd; - } - /* root ports should always stay powered */ ehci_port_power(omap_ehci, 1);