diff --git a/Documentation/devicetree/bindings/hwmon/ltc4151.txt b/Documentation/devicetree/bindings/hwmon/ltc4151.txt new file mode 100644 index 000000000000..d008a5ef525a --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ltc4151.txt @@ -0,0 +1,18 @@ +LTC4151 High Voltage I2C Current and Voltage Monitor + +Required properties: +- compatible: Must be "lltc,ltc4151" +- reg: I2C address + +Optional properties: +- shunt-resistor-micro-ohms + Shunt resistor value in micro-Ohms + Defaults to <1000> if unset. + +Example: + +ltc4151@6e { + compatible = "lltc,ltc4151"; + reg = <0x6e>; + shunt-resistor-micro-ohms = <1500>; +}; diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt new file mode 100644 index 000000000000..f6bd87d8e284 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/max6650.txt @@ -0,0 +1,28 @@ +Bindings for MAX6651 and MAX6650 I2C fan controllers + +Reference: +[1] https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf + +Required properties: +- compatible : One of "maxim,max6650" or "maxim,max6651" +- reg : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48. + +Optional properties, default is to retain the chip's current setting: +- maxim,fan-microvolt : The supply voltage of the fan, either 5000000 uV or + 12000000 uV. +- maxim,fan-prescale : Pre-scaling value, as per datasheet [1]. Lower values + allow more fine-grained control of slower fans. + Valid: 1, 2, 4, 8, 16. +- maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the + driver selects closed-loop mode and the requested speed. + This ensures the fan is already running before userspace + takes over. + +Example: + fan-max6650: max6650@1b { + reg = <0x1b>; + compatible = "maxim,max6650"; + maxim,fan-microvolt = <12000000>; + maxim,fan-prescale = <4>; + maxim,fan-target-rpm = <1200>; + }; diff --git a/Documentation/hwmon/adt7470 b/Documentation/hwmon/adt7470 index 8ce4aa0a0f55..fe68e18a0c8d 100644 --- a/Documentation/hwmon/adt7470 +++ b/Documentation/hwmon/adt7470 @@ -65,6 +65,23 @@ from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the temperature sensor associated with the PWM control exceeds pwm#_auto_point2_temp. +The driver also allows control of the PWM frequency: + +* pwm1_freq + +The PWM frequency is rounded to the nearest one of: + +* 11.0 Hz +* 14.7 Hz +* 22.1 Hz +* 29.4 Hz +* 35.3 Hz +* 44.1 Hz +* 58.8 Hz +* 88.2 Hz +* 1.4 kHz +* 22.5 kHz + Notes ----- diff --git a/Documentation/hwmon/hwmon-kernel-api.txt b/Documentation/hwmon/hwmon-kernel-api.txt index 2ecdbfc85ecf..ef9d74947f5c 100644 --- a/Documentation/hwmon/hwmon-kernel-api.txt +++ b/Documentation/hwmon/hwmon-kernel-api.txt @@ -34,6 +34,19 @@ devm_hwmon_device_register_with_groups(struct device *dev, const char *name, void *drvdata, const struct attribute_group **groups); +struct device * +hwmon_device_register_with_info(struct device *dev, + const char *name, void *drvdata, + const struct hwmon_chip_info *info, + const struct attribute_group **groups); + +struct device * +devm_hwmon_device_register_with_info(struct device *dev, + const char *name, + void *drvdata, + const struct hwmon_chip_info *info, + const struct attribute_group **groups); + void hwmon_device_unregister(struct device *dev); void devm_hwmon_device_unregister(struct device *dev); @@ -60,15 +73,229 @@ devm_hwmon_device_register_with_groups is similar to hwmon_device_register_with_groups. However, it is device managed, meaning the hwmon device does not have to be removed explicitly by the removal function. +hwmon_device_register_with_info is the most comprehensive and preferred means +to register a hardware monitoring device. It creates the standard sysfs +attributes in the hardware monitoring core, letting the driver focus on reading +from and writing to the chip instead of having to bother with sysfs attributes. +Its parameters are described in more detail below. + +devm_hwmon_device_register_with_info is similar to +hwmon_device_register_with_info. However, it is device managed, meaning the +hwmon device does not have to be removed explicitly by the removal function. + hwmon_device_unregister deregisters a registered hardware monitoring device. The parameter of this function is the pointer to the registered hardware monitoring device structure. This function must be called from the driver remove function if the hardware monitoring device was registered with -hwmon_device_register or with hwmon_device_register_with_groups. +hwmon_device_register, hwmon_device_register_with_groups, or +hwmon_device_register_with_info. devm_hwmon_device_unregister does not normally have to be called. It is only needed for error handling, and only needed if the driver probe fails after -the call to devm_hwmon_device_register_with_groups. +the call to devm_hwmon_device_register_with_groups and if the automatic +(device managed) removal would be too late. + +Using devm_hwmon_device_register_with_info() +-------------------------------------------- + +hwmon_device_register_with_info() registers a hardware monitoring device. +The parameters to this function are + +struct device *dev Pointer to parent device +const char *name Device name +void *drvdata Driver private data +const struct hwmon_chip_info *info + Pointer to chip description. +const struct attribute_group **groups + Null-terminated list of additional sysfs attribute + groups. + +This function returns a pointer to the created hardware monitoring device +on success and a negative error code for failure. + +The hwmon_chip_info structure looks as follows. + +struct hwmon_chip_info { + const struct hwmon_ops *ops; + const struct hwmon_channel_info **info; +}; + +It contains the following fields: + +* ops: Pointer to device operations. +* info: NULL-terminated list of device channel descriptors. + +The list of hwmon operations is defined as: + +struct hwmon_ops { + umode_t (*is_visible)(const void *, enum hwmon_sensor_types type, + u32 attr, int); + int (*read)(struct device *, enum hwmon_sensor_types type, + u32 attr, int, long *); + int (*write)(struct device *, enum hwmon_sensor_types type, + u32 attr, int, long); +}; + +It defines the following operations. + +* is_visible: Pointer to a function to return the file mode for each supported + attribute. This function is mandatory. + +* read: Pointer to a function for reading a value from the chip. This function + is optional, but must be provided if any readable attributes exist. + +* write: Pointer to a function for writing a value to the chip. This function is + optional, but must be provided if any writeable attributes exist. + +Each sensor channel is described with struct hwmon_channel_info, which is +defined as follows. + +struct hwmon_channel_info { + enum hwmon_sensor_types type; + u32 *config; +}; + +It contains following fields: + +* type: The hardware monitoring sensor type. + Supported sensor types are + * hwmon_chip A virtual sensor type, used to describe attributes + which apply to the entire chip. + * hwmon_temp Temperature sensor + * hwmon_in Voltage sensor + * hwmon_curr Current sensor + * hwmon_power Power sensor + * hwmon_energy Energy sensor + * hwmon_humidity Humidity sensor + * hwmon_fan Fan speed sensor + * hwmon_pwm PWM control + +* config: Pointer to a 0-terminated list of configuration values for each + sensor of the given type. Each value is a combination of bit values + describing the attributes supposed by a single sensor. + +As an example, here is the complete description file for a LM75 compatible +sensor chip. The chip has a single temperature sensor. The driver wants to +register with the thermal subsystem (HWMON_C_REGISTER_TZ), and it supports +the update_interval attribute (HWMON_C_UPDATE_INTERVAL). The chip supports +reading the temperature (HWMON_T_INPUT), it has a maximum temperature +register (HWMON_T_MAX) as well as a maximum temperature hysteresis register +(HWMON_T_MAX_HYST). + +static const u32 lm75_chip_config[] = { + HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL, + 0 +}; + +static const struct hwmon_channel_info lm75_chip = { + .type = hwmon_chip, + .config = lm75_chip_config, +}; + +static const u32 lm75_temp_config[] = { + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST, + 0 +}; + +static const struct hwmon_channel_info lm75_temp = { + .type = hwmon_temp, + .config = lm75_temp_config, +}; + +static const struct hwmon_channel_info *lm75_info[] = { + &lm75_chip, + &lm75_temp, + NULL +}; + +static const struct hwmon_ops lm75_hwmon_ops = { + .is_visible = lm75_is_visible, + .read = lm75_read, + .write = lm75_write, +}; + +static const struct hwmon_chip_info lm75_chip_info = { + .ops = &lm75_hwmon_ops, + .info = lm75_info, +}; + +A complete list of bit values indicating individual attribute support +is defined in include/linux/hwmon.h. Definition prefixes are as follows. + +HWMON_C_xxxx Chip attributes, for use with hwmon_chip. +HWMON_T_xxxx Temperature attributes, for use with hwmon_temp. +HWMON_I_xxxx Voltage attributes, for use with hwmon_in. +HWMON_C_xxxx Current attributes, for use with hwmon_curr. + Notice the prefix overlap with chip attributes. +HWMON_P_xxxx Power attributes, for use with hwmon_power. +HWMON_E_xxxx Energy attributes, for use with hwmon_energy. +HWMON_H_xxxx Humidity attributes, for use with hwmon_humidity. +HWMON_F_xxxx Fan speed attributes, for use with hwmon_fan. +HWMON_PWM_xxxx PWM control attributes, for use with hwmon_pwm. + +Driver callback functions +------------------------- + +Each driver provides is_visible, read, and write functions. Parameters +and return values for those functions are as follows. + +umode_t is_visible_func(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) + +Parameters: + data: Pointer to device private data structure. + type: The sensor type. + attr: Attribute identifier associated with a specific attribute. + For example, the attribute value for HWMON_T_INPUT would be + hwmon_temp_input. For complete mappings of bit fields to + attribute values please see include/linux/hwmon.h. + channel:The sensor channel number. + +Return value: + The file mode for this attribute. Typically, this will be 0 (the + attribute will not be created), S_IRUGO, or 'S_IRUGO | S_IWUSR'. + +int read_func(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) + +Parameters: + dev: Pointer to the hardware monitoring device. + type: The sensor type. + attr: Attribute identifier associated with a specific attribute. + For example, the attribute value for HWMON_T_INPUT would be + hwmon_temp_input. For complete mappings please see + include/linux/hwmon.h. + channel:The sensor channel number. + val: Pointer to attribute value. + +Return value: + 0 on success, a negative error number otherwise. + +int write_func(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) + +Parameters: + dev: Pointer to the hardware monitoring device. + type: The sensor type. + attr: Attribute identifier associated with a specific attribute. + For example, the attribute value for HWMON_T_INPUT would be + hwmon_temp_input. For complete mappings please see + include/linux/hwmon.h. + channel:The sensor channel number. + val: The value to write to the chip. + +Return value: + 0 on success, a negative error number otherwise. + + +Driver-provided sysfs attributes +-------------------------------- + +If the hardware monitoring device is registered with +hwmon_device_register_with_info or devm_hwmon_device_register_with_info, +it is most likely not necessary to provide sysfs attributes. Only non-standard +sysfs attributes need to be provided when one of those registration functions +is used. The header file linux/hwmon-sysfs.h provides a number of useful macros to declare and use hardware monitoring sysfs attributes. diff --git a/Documentation/hwmon/max6650 b/Documentation/hwmon/max6650 index 58d9644a2bde..dff1d296a48b 100644 --- a/Documentation/hwmon/max6650 +++ b/Documentation/hwmon/max6650 @@ -34,6 +34,7 @@ fan3_input ro " fan4_input ro " fan1_target rw desired fan speed in RPM (closed loop mode only) pwm1_enable rw regulator mode, 0=full on, 1=open loop, 2=closed loop + 3=off pwm1 rw relative speed (0-255), 255=max. speed. Used in open loop mode only. fan1_div rw sets the speed range the inputs can handle. Legal diff --git a/Documentation/hwmon/ucd9000 b/Documentation/hwmon/ucd9000 index 805e33edb978..262e713e60ff 100644 --- a/Documentation/hwmon/ucd9000 +++ b/Documentation/hwmon/ucd9000 @@ -2,12 +2,13 @@ Kernel driver ucd9000 ===================== Supported chips: - * TI UCD90120, UCD90124, UCD9090, and UCD90910 - Prefixes: 'ucd90120', 'ucd90124', 'ucd9090', 'ucd90910' + * TI UCD90120, UCD90124, UCD90160, UCD9090, and UCD90910 + Prefixes: 'ucd90120', 'ucd90124', 'ucd90160', 'ucd9090', 'ucd90910' Addresses scanned: - Datasheets: http://focus.ti.com/lit/ds/symlink/ucd90120.pdf http://focus.ti.com/lit/ds/symlink/ucd90124.pdf + http://focus.ti.com/lit/ds/symlink/ucd90160.pdf http://focus.ti.com/lit/ds/symlink/ucd9090.pdf http://focus.ti.com/lit/ds/symlink/ucd90910.pdf @@ -32,6 +33,13 @@ interrupts, cascading, or other system functions. Twelve of these pins offer PWM functionality. Using these pins, the UCD90124 offers support for fan control, margining, and general-purpose PWM functions. +The UCD90160 is a 16-rail PMBus/I2C addressable power-supply sequencer and +monitor. The device integrates a 12-bit ADC for monitoring up to 16 power-supply +voltage inputs. Twenty-six GPIO pins can be used for power supply enables, +power-on reset signals, external interrupts, cascading, or other system +functions. Twelve of these pins offer PWM functionality. Using these pins, the +UCD90160 offers support for margining, and general-purpose PWM functions. + The UCD9090 is a 10-rail PMBus/I2C addressable power-supply sequencer and monitor. The device integrates a 12-bit ADC for monitoring up to 10 power-supply voltage inputs. Twenty-three GPIO pins can be used for power supply enables, diff --git a/Documentation/hwmon/xgene-hwmon b/Documentation/hwmon/xgene-hwmon new file mode 100644 index 000000000000..6ec50ed7cc8f --- /dev/null +++ b/Documentation/hwmon/xgene-hwmon @@ -0,0 +1,30 @@ +Kernel driver xgene-hwmon +======================== + +Supported chips: + * APM X-Gene SoC + +Description +----------- + +This driver adds hardware temperature and power reading support for +APM X-Gene SoC using the mailbox communication interface. +For device tree, it is the standard DT mailbox. +For ACPI, it is the PCC mailbox. + +The following sensors are supported + + * Temperature + - SoC on-die temperature in milli-degree C + - Alarm when high/over temperature occurs + * Power + - CPU power in uW + - IO power in uW + +sysfs-Interface +--------------- + +temp0_input - SoC on-die temperature (milli-degree C) +temp0_critical_alarm - An 1 would indicates on-die temperature exceeded threshold +power0_input - CPU power in (uW) +power1_input - IO power in (uW) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index eaf2f916d48c..45cef3d2c75c 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -969,7 +969,6 @@ config SENSORS_LM73 config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on I2C - depends on THERMAL || !THERMAL_OF select REGMAP_I2C help If you say yes here you get support for one common type of @@ -1119,6 +1118,7 @@ config SENSORS_LM95241 config SENSORS_LM95245 tristate "National Semiconductor LM95245 and compatibles" depends on I2C + select REGMAP_I2C help If you say yes here you get support for LM95235 and LM95245 temperature sensor chips. @@ -1572,7 +1572,6 @@ config SENSORS_THMC50 config SENSORS_TMP102 tristate "Texas Instruments TMP102" depends on I2C - depends on THERMAL || !THERMAL_OF select REGMAP_I2C help If you say yes here you get support for Texas Instruments TMP102 @@ -1823,6 +1822,13 @@ config SENSORS_ULTRA45 This driver provides support for the Ultra45 workstation environmental sensors. +config SENSORS_XGENE + tristate "APM X-Gene SoC hardware monitoring driver" + depends on XGENE_SLIMPRO_MBOX || PCC + help + If you say yes here you get support for the temperature + and power sensors for APM X-Gene SoC. + if ACPI comment "ACPI drivers" diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index fe87d2895a97..aecf4ba17460 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -165,6 +165,7 @@ obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o +obj-$(CONFIG_SENSORS_XGENE) += xgene-hwmon.o obj-$(CONFIG_PMBUS) += pmbus/ diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c index fc1e65a263a4..812fbc00f693 100644 --- a/drivers/hwmon/adt7411.c +++ b/drivers/hwmon/adt7411.c @@ -7,8 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * TODO: SPI, support for external temperature sensor - * use power-down mode for suspend?, interrupt handling? + * TODO: SPI, use power-down mode for suspend?, interrupt handling? */ #include @@ -31,6 +30,7 @@ #define ADT7411_REG_CFG1 0x18 #define ADT7411_CFG1_START_MONITOR (1 << 0) #define ADT7411_CFG1_RESERVED_BIT1 (1 << 1) +#define ADT7411_CFG1_EXT_TDM (1 << 2) #define ADT7411_CFG1_RESERVED_BIT3 (1 << 3) #define ADT7411_REG_CFG2 0x19 @@ -57,6 +57,7 @@ struct adt7411_data { unsigned long next_update; int vref_cached; struct i2c_client *client; + bool use_ext_temp; }; /* @@ -127,11 +128,20 @@ static ssize_t adt7411_show_vdd(struct device *dev, static ssize_t adt7411_show_temp(struct device *dev, struct device_attribute *attr, char *buf) { + int nr = to_sensor_dev_attr(attr)->index; struct adt7411_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; - int val = adt7411_read_10_bit(client, ADT7411_REG_INT_TEMP_VDD_LSB, - ADT7411_REG_INT_TEMP_MSB, 0); + int val; + struct { + u8 low; + u8 high; + } reg[2] = { + { ADT7411_REG_INT_TEMP_VDD_LSB, ADT7411_REG_INT_TEMP_MSB }, + { ADT7411_REG_EXT_TEMP_AIN14_LSB, + ADT7411_REG_EXT_TEMP_AIN1_MSB }, + }; + val = adt7411_read_10_bit(client, reg[nr].low, reg[nr].high, 0); if (val < 0) return val; @@ -218,11 +228,13 @@ static ssize_t adt7411_set_bit(struct device *dev, return ret < 0 ? ret : count; } + #define ADT7411_BIT_ATTR(__name, __reg, __bit) \ SENSOR_DEVICE_ATTR_2(__name, S_IRUGO | S_IWUSR, adt7411_show_bit, \ adt7411_set_bit, __bit, __reg) -static DEVICE_ATTR(temp1_input, S_IRUGO, adt7411_show_temp, NULL); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, adt7411_show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, adt7411_show_temp, NULL, 1); static DEVICE_ATTR(in0_input, S_IRUGO, adt7411_show_vdd, NULL); static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, adt7411_show_input, NULL, 0); static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, adt7411_show_input, NULL, 1); @@ -237,7 +249,8 @@ static ADT7411_BIT_ATTR(fast_sampling, ADT7411_REG_CFG3, ADT7411_CFG3_ADC_CLK_22 static ADT7411_BIT_ATTR(adc_ref_vdd, ADT7411_REG_CFG3, ADT7411_CFG3_REF_VDD); static struct attribute *adt7411_attrs[] = { - &dev_attr_temp1_input.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, &dev_attr_in0_input.attr, &sensor_dev_attr_in1_input.dev_attr.attr, &sensor_dev_attr_in2_input.dev_attr.attr, @@ -253,7 +266,27 @@ static struct attribute *adt7411_attrs[] = { NULL }; -ATTRIBUTE_GROUPS(adt7411); +static umode_t adt7411_attrs_visible(struct kobject *kobj, + struct attribute *attr, int index) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct adt7411_data *data = dev_get_drvdata(dev); + bool visible = true; + + if (attr == &sensor_dev_attr_temp2_input.dev_attr.attr) + visible = data->use_ext_temp; + else if (attr == &sensor_dev_attr_in1_input.dev_attr.attr || + attr == &sensor_dev_attr_in2_input.dev_attr.attr) + visible = !data->use_ext_temp; + + return visible ? attr->mode : 0; +} + +static const struct attribute_group adt7411_group = { + .attrs = adt7411_attrs, + .is_visible = adt7411_attrs_visible, +}; +__ATTRIBUTE_GROUPS(adt7411); static int adt7411_detect(struct i2c_client *client, struct i2c_board_info *info) @@ -309,6 +342,8 @@ static int adt7411_init_device(struct adt7411_data *data) if (ret < 0) return ret; + data->use_ext_temp = ret & ADT7411_CFG1_EXT_TDM; + /* * We must only write zero to bit 1 and only one to bit 3 according to * the datasheet. diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index f5da39a68929..6e60ca53406e 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -32,6 +32,7 @@ #include #include #include +#include /* Addresses to scan */ static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END }; @@ -83,6 +84,7 @@ static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END }; #define ADT7470_REG_PWM_MIN_MAX_ADDR 0x6D #define ADT7470_REG_PWM_TEMP_MIN_BASE_ADDR 0x6E #define ADT7470_REG_PWM_TEMP_MIN_MAX_ADDR 0x71 +#define ADT7470_REG_CFG_2 0x74 #define ADT7470_REG_ACOUSTICS12 0x75 #define ADT7470_REG_ACOUSTICS34 0x76 #define ADT7470_REG_DEVICE 0x3D @@ -142,6 +144,11 @@ static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END }; #define FAN_PERIOD_INVALID 65535 #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) +/* Config registers 1 and 2 include fields for selecting the PWM frequency */ +#define ADT7470_CFG_LF 0x40 +#define ADT7470_FREQ_MASK 0x70 +#define ADT7470_FREQ_SHIFT 4 + struct adt7470_data { struct i2c_client *client; struct mutex lock; @@ -170,7 +177,6 @@ struct adt7470_data { u8 pwm_auto_temp[ADT7470_PWM_COUNT]; struct task_struct *auto_update; - struct completion auto_update_stop; unsigned int auto_update_interval; }; @@ -266,12 +272,14 @@ static int adt7470_update_thread(void *p) mutex_lock(&data->lock); adt7470_read_temperatures(client, data); mutex_unlock(&data->lock); + + set_current_state(TASK_INTERRUPTIBLE); if (kthread_should_stop()) break; - msleep_interruptible(data->auto_update_interval); + + schedule_timeout(msecs_to_jiffies(data->auto_update_interval)); } - complete_all(&data->auto_update_stop); return 0; } @@ -538,6 +546,28 @@ static ssize_t show_alarm_mask(struct device *dev, return sprintf(buf, "%x\n", data->alarms_mask); } +static ssize_t set_alarm_mask(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct adt7470_data *data = dev_get_drvdata(dev); + long mask; + + if (kstrtoul(buf, 0, &mask)) + return -EINVAL; + + if (mask & ~0xffff) + return -EINVAL; + + mutex_lock(&data->lock); + data->alarms_mask = mask; + adt7470_write_word_data(data->client, ADT7470_REG_ALARM1_MASK, mask); + mutex_unlock(&data->lock); + + return count; +} + static ssize_t show_fan_max(struct device *dev, struct device_attribute *devattr, char *buf) @@ -688,6 +718,70 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, return count; } +/* These are the valid PWM frequencies to the nearest Hz */ +static const int adt7470_freq_map[] = { + 11, 15, 22, 29, 35, 44, 59, 88, 1400, 22500 +}; + +static ssize_t show_pwm_freq(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct adt7470_data *data = adt7470_update_device(dev); + unsigned char cfg_reg_1; + unsigned char cfg_reg_2; + int index; + + mutex_lock(&data->lock); + cfg_reg_1 = i2c_smbus_read_byte_data(data->client, ADT7470_REG_CFG); + cfg_reg_2 = i2c_smbus_read_byte_data(data->client, ADT7470_REG_CFG_2); + mutex_unlock(&data->lock); + + index = (cfg_reg_2 & ADT7470_FREQ_MASK) >> ADT7470_FREQ_SHIFT; + if (!(cfg_reg_1 & ADT7470_CFG_LF)) + index += 8; + if (index >= ARRAY_SIZE(adt7470_freq_map)) + index = ARRAY_SIZE(adt7470_freq_map) - 1; + + return scnprintf(buf, PAGE_SIZE, "%d\n", adt7470_freq_map[index]); +} + +static ssize_t set_pwm_freq(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct adt7470_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long freq; + int index; + int low_freq = ADT7470_CFG_LF; + unsigned char val; + + if (kstrtol(buf, 10, &freq)) + return -EINVAL; + + /* Round the user value given to the closest available frequency */ + index = find_closest(freq, adt7470_freq_map, + ARRAY_SIZE(adt7470_freq_map)); + + if (index >= 8) { + index -= 8; + low_freq = 0; + } + + mutex_lock(&data->lock); + /* Configuration Register 1 */ + val = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG); + i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, + (val & ~ADT7470_CFG_LF) | low_freq); + /* Configuration Register 2 */ + val = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG_2); + i2c_smbus_write_byte_data(client, ADT7470_REG_CFG_2, + (val & ~ADT7470_FREQ_MASK) | (index << ADT7470_FREQ_SHIFT)); + mutex_unlock(&data->lock); + + return count; +} + static ssize_t show_pwm_max(struct device *dev, struct device_attribute *devattr, char *buf) @@ -918,7 +1012,8 @@ static ssize_t show_alarm(struct device *dev, return sprintf(buf, "0\n"); } -static DEVICE_ATTR(alarm_mask, S_IRUGO, show_alarm_mask, NULL); +static DEVICE_ATTR(alarm_mask, S_IWUSR | S_IRUGO, show_alarm_mask, + set_alarm_mask); static DEVICE_ATTR(num_temp_sensors, S_IWUSR | S_IRUGO, show_num_temp_sensors, set_num_temp_sensors); static DEVICE_ATTR(auto_update_interval, S_IWUSR | S_IRUGO, @@ -1038,6 +1133,8 @@ static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1); static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2); static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 3); +static DEVICE_ATTR(pwm1_freq, S_IWUSR | S_IRUGO, show_pwm_freq, set_pwm_freq); + static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO, show_pwm_min, set_pwm_min, 0); static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO, @@ -1154,6 +1251,7 @@ static struct attribute *adt7470_attrs[] = { &sensor_dev_attr_fan4_alarm.dev_attr.attr, &sensor_dev_attr_force_pwm_max.dev_attr.attr, &sensor_dev_attr_pwm1.dev_attr.attr, + &dev_attr_pwm1_freq.attr, &sensor_dev_attr_pwm2.dev_attr.attr, &sensor_dev_attr_pwm3.dev_attr.attr, &sensor_dev_attr_pwm4.dev_attr.attr, @@ -1256,7 +1354,6 @@ static int adt7470_probe(struct i2c_client *client, if (IS_ERR(hwmon_dev)) return PTR_ERR(hwmon_dev); - init_completion(&data->auto_update_stop); data->auto_update = kthread_run(adt7470_update_thread, client, "%s", dev_name(hwmon_dev)); if (IS_ERR(data->auto_update)) { @@ -1271,7 +1368,6 @@ static int adt7470_remove(struct i2c_client *client) struct adt7470_data *data = i2c_get_clientdata(client); kthread_stop(data->auto_update); - wait_for_completion(&data->auto_update_stop); return 0; } diff --git a/drivers/hwmon/ftsteutates.c b/drivers/hwmon/ftsteutates.c index 48633e541dc3..0f0277e7aae5 100644 --- a/drivers/hwmon/ftsteutates.c +++ b/drivers/hwmon/ftsteutates.c @@ -36,6 +36,10 @@ #define FTS_EVENT_STATUS_REG 0x0006 #define FTS_GLOBAL_CONTROL_REG 0x0007 +#define FTS_DEVICE_DETECT_REG_1 0x0C +#define FTS_DEVICE_DETECT_REG_2 0x0D +#define FTS_DEVICE_DETECT_REG_3 0x0E + #define FTS_SENSOR_EVENT_REG 0x0010 #define FTS_FAN_EVENT_REG 0x0014 @@ -54,6 +58,8 @@ #define FTS_NO_TEMP_SENSORS 0x10 #define FTS_NO_VOLT_SENSORS 0x04 +static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; + static struct i2c_device_id fts_id[] = { { "ftsteutates", 0 }, { } @@ -734,6 +740,42 @@ static const struct attribute_group *fts_attr_groups[] = { /*****************************************************************************/ /* Module initialization / remove functions */ /*****************************************************************************/ +static int fts_detect(struct i2c_client *client, + struct i2c_board_info *info) +{ + int val; + + /* detection works with revsion greater or equal to 0x2b */ + val = i2c_smbus_read_byte_data(client, FTS_DEVICE_REVISION_REG); + if (val < 0x2b) + return -ENODEV; + + /* Device Detect Regs must have 0x17 0x34 and 0x54 */ + val = i2c_smbus_read_byte_data(client, FTS_DEVICE_DETECT_REG_1); + if (val != 0x17) + return -ENODEV; + + val = i2c_smbus_read_byte_data(client, FTS_DEVICE_DETECT_REG_2); + if (val != 0x34) + return -ENODEV; + + val = i2c_smbus_read_byte_data(client, FTS_DEVICE_DETECT_REG_3); + if (val != 0x54) + return -ENODEV; + + /* + * 0x10 == Baseboard Management Controller, 0x01 == Teutates + * Device ID Reg needs to be 0x11 + */ + val = i2c_smbus_read_byte_data(client, FTS_DEVICE_ID_REG); + if (val != 0x11) + return -ENODEV; + + strlcpy(info->type, fts_id[0].name, I2C_NAME_SIZE); + info->flags = 0; + return 0; +} + static int fts_remove(struct i2c_client *client) { struct fts_data *data = dev_get_drvdata(&client->dev); @@ -804,12 +846,15 @@ static int fts_probe(struct i2c_client *client, const struct i2c_device_id *id) /* Module Details */ /*****************************************************************************/ static struct i2c_driver fts_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "ftsteutates", }, .id_table = fts_id, .probe = fts_probe, .remove = fts_remove, + .detect = fts_detect, + .address_list = normal_i2c, }; module_i2c_driver(fts_driver); diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index a26c385a435b..adae6848ffb2 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -12,17 +12,17 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#include +#include #include #include -#include -#include -#include -#include #include -#include +#include +#include +#include #include +#include #include +#include #define HWMON_ID_PREFIX "hwmon" #define HWMON_ID_FORMAT HWMON_ID_PREFIX "%d" @@ -30,9 +30,35 @@ struct hwmon_device { const char *name; struct device dev; + const struct hwmon_chip_info *chip; + + struct attribute_group group; + const struct attribute_group **groups; }; + #define to_hwmon_device(d) container_of(d, struct hwmon_device, dev) +struct hwmon_device_attribute { + struct device_attribute dev_attr; + const struct hwmon_ops *ops; + enum hwmon_sensor_types type; + u32 attr; + int index; +}; + +#define to_hwmon_attr(d) \ + container_of(d, struct hwmon_device_attribute, dev_attr) + +/* + * Thermal zone information + * In addition to the reference to the hwmon device, + * also provides the sensor index. + */ +struct hwmon_thermal_data { + struct hwmon_device *hwdev; /* Reference to hwmon device */ + int index; /* sensor index */ +}; + static ssize_t show_name(struct device *dev, struct device_attribute *attr, char *buf) { @@ -80,6 +106,498 @@ static struct class hwmon_class = { static DEFINE_IDA(hwmon_ida); +/* Thermal zone handling */ + +/* + * The complex conditional is necessary to avoid a cyclic dependency + * between hwmon and thermal_sys modules. + */ +#if IS_REACHABLE(CONFIG_THERMAL) && defined(CONFIG_THERMAL_OF) && \ + (!defined(CONFIG_THERMAL_HWMON) || \ + !(defined(MODULE) && IS_MODULE(CONFIG_THERMAL))) +static int hwmon_thermal_get_temp(void *data, int *temp) +{ + struct hwmon_thermal_data *tdata = data; + struct hwmon_device *hwdev = tdata->hwdev; + int ret; + long t; + + ret = hwdev->chip->ops->read(&hwdev->dev, hwmon_temp, hwmon_temp_input, + tdata->index, &t); + if (ret < 0) + return ret; + + *temp = t; + + return 0; +} + +static struct thermal_zone_of_device_ops hwmon_thermal_ops = { + .get_temp = hwmon_thermal_get_temp, +}; + +static int hwmon_thermal_add_sensor(struct device *dev, + struct hwmon_device *hwdev, int index) +{ + struct hwmon_thermal_data *tdata; + + tdata = devm_kzalloc(dev, sizeof(*tdata), GFP_KERNEL); + if (!tdata) + return -ENOMEM; + + tdata->hwdev = hwdev; + tdata->index = index; + + devm_thermal_zone_of_sensor_register(&hwdev->dev, index, tdata, + &hwmon_thermal_ops); + + return 0; +} +#else +static int hwmon_thermal_add_sensor(struct device *dev, + struct hwmon_device *hwdev, int index) +{ + return 0; +} +#endif /* IS_REACHABLE(CONFIG_THERMAL) && ... */ + +/* sysfs attribute management */ + +static ssize_t hwmon_attr_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct hwmon_device_attribute *hattr = to_hwmon_attr(devattr); + long val; + int ret; + + ret = hattr->ops->read(dev, hattr->type, hattr->attr, hattr->index, + &val); + if (ret < 0) + return ret; + + return sprintf(buf, "%ld\n", val); +} + +static ssize_t hwmon_attr_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct hwmon_device_attribute *hattr = to_hwmon_attr(devattr); + long val; + int ret; + + ret = kstrtol(buf, 10, &val); + if (ret < 0) + return ret; + + ret = hattr->ops->write(dev, hattr->type, hattr->attr, hattr->index, + val); + if (ret < 0) + return ret; + + return count; +} + +static int hwmon_attr_base(enum hwmon_sensor_types type) +{ + if (type == hwmon_in) + return 0; + return 1; +} + +static struct attribute *hwmon_genattr(struct device *dev, + const void *drvdata, + enum hwmon_sensor_types type, + u32 attr, + int index, + const char *template, + const struct hwmon_ops *ops) +{ + struct hwmon_device_attribute *hattr; + struct device_attribute *dattr; + struct attribute *a; + umode_t mode; + char *name; + + /* The attribute is invisible if there is no template string */ + if (!template) + return ERR_PTR(-ENOENT); + + mode = ops->is_visible(drvdata, type, attr, index); + if (!mode) + return ERR_PTR(-ENOENT); + + if ((mode & S_IRUGO) && !ops->read) + return ERR_PTR(-EINVAL); + if ((mode & S_IWUGO) && !ops->write) + return ERR_PTR(-EINVAL); + + if (type == hwmon_chip) { + name = (char *)template; + } else { + name = devm_kzalloc(dev, strlen(template) + 16, GFP_KERNEL); + if (!name) + return ERR_PTR(-ENOMEM); + scnprintf(name, strlen(template) + 16, template, + index + hwmon_attr_base(type)); + } + + hattr = devm_kzalloc(dev, sizeof(*hattr), GFP_KERNEL); + if (!hattr) + return ERR_PTR(-ENOMEM); + + hattr->type = type; + hattr->attr = attr; + hattr->index = index; + hattr->ops = ops; + + dattr = &hattr->dev_attr; + dattr->show = hwmon_attr_show; + dattr->store = hwmon_attr_store; + + a = &dattr->attr; + sysfs_attr_init(a); + a->name = name; + a->mode = mode; + + return a; +} + +static const char * const hwmon_chip_attr_templates[] = { + [hwmon_chip_temp_reset_history] = "temp_reset_history", + [hwmon_chip_in_reset_history] = "in_reset_history", + [hwmon_chip_curr_reset_history] = "curr_reset_history", + [hwmon_chip_power_reset_history] = "power_reset_history", + [hwmon_chip_update_interval] = "update_interval", + [hwmon_chip_alarms] = "alarms", +}; + +static const char * const hwmon_temp_attr_templates[] = { + [hwmon_temp_input] = "temp%d_input", + [hwmon_temp_type] = "temp%d_type", + [hwmon_temp_lcrit] = "temp%d_lcrit", + [hwmon_temp_lcrit_hyst] = "temp%d_lcrit_hyst", + [hwmon_temp_min] = "temp%d_min", + [hwmon_temp_min_hyst] = "temp%d_min_hyst", + [hwmon_temp_max] = "temp%d_max", + [hwmon_temp_max_hyst] = "temp%d_max_hyst", + [hwmon_temp_crit] = "temp%d_crit", + [hwmon_temp_crit_hyst] = "temp%d_crit_hyst", + [hwmon_temp_emergency] = "temp%d_emergency", + [hwmon_temp_emergency_hyst] = "temp%d_emergency_hyst", + [hwmon_temp_alarm] = "temp%d_alarm", + [hwmon_temp_lcrit_alarm] = "temp%d_lcrit_alarm", + [hwmon_temp_min_alarm] = "temp%d_min_alarm", + [hwmon_temp_max_alarm] = "temp%d_max_alarm", + [hwmon_temp_crit_alarm] = "temp%d_crit_alarm", + [hwmon_temp_emergency_alarm] = "temp%d_emergency_alarm", + [hwmon_temp_fault] = "temp%d_fault", + [hwmon_temp_offset] = "temp%d_offset", + [hwmon_temp_label] = "temp%d_label", + [hwmon_temp_lowest] = "temp%d_lowest", + [hwmon_temp_highest] = "temp%d_highest", + [hwmon_temp_reset_history] = "temp%d_reset_history", +}; + +static const char * const hwmon_in_attr_templates[] = { + [hwmon_in_input] = "in%d_input", + [hwmon_in_min] = "in%d_min", + [hwmon_in_max] = "in%d_max", + [hwmon_in_lcrit] = "in%d_lcrit", + [hwmon_in_crit] = "in%d_crit", + [hwmon_in_average] = "in%d_average", + [hwmon_in_lowest] = "in%d_lowest", + [hwmon_in_highest] = "in%d_highest", + [hwmon_in_reset_history] = "in%d_reset_history", + [hwmon_in_label] = "in%d_label", + [hwmon_in_alarm] = "in%d_alarm", + [hwmon_in_min_alarm] = "in%d_min_alarm", + [hwmon_in_max_alarm] = "in%d_max_alarm", + [hwmon_in_lcrit_alarm] = "in%d_lcrit_alarm", + [hwmon_in_crit_alarm] = "in%d_crit_alarm", +}; + +static const char * const hwmon_curr_attr_templates[] = { + [hwmon_curr_input] = "curr%d_input", + [hwmon_curr_min] = "curr%d_min", + [hwmon_curr_max] = "curr%d_max", + [hwmon_curr_lcrit] = "curr%d_lcrit", + [hwmon_curr_crit] = "curr%d_crit", + [hwmon_curr_average] = "curr%d_average", + [hwmon_curr_lowest] = "curr%d_lowest", + [hwmon_curr_highest] = "curr%d_highest", + [hwmon_curr_reset_history] = "curr%d_reset_history", + [hwmon_curr_label] = "curr%d_label", + [hwmon_curr_alarm] = "curr%d_alarm", + [hwmon_curr_min_alarm] = "curr%d_min_alarm", + [hwmon_curr_max_alarm] = "curr%d_max_alarm", + [hwmon_curr_lcrit_alarm] = "curr%d_lcrit_alarm", + [hwmon_curr_crit_alarm] = "curr%d_crit_alarm", +}; + +static const char * const hwmon_power_attr_templates[] = { + [hwmon_power_average] = "power%d_average", + [hwmon_power_average_interval] = "power%d_average_interval", + [hwmon_power_average_interval_max] = "power%d_interval_max", + [hwmon_power_average_interval_min] = "power%d_interval_min", + [hwmon_power_average_highest] = "power%d_average_highest", + [hwmon_power_average_lowest] = "power%d_average_lowest", + [hwmon_power_average_max] = "power%d_average_max", + [hwmon_power_average_min] = "power%d_average_min", + [hwmon_power_input] = "power%d_input", + [hwmon_power_input_highest] = "power%d_input_highest", + [hwmon_power_input_lowest] = "power%d_input_lowest", + [hwmon_power_reset_history] = "power%d_reset_history", + [hwmon_power_accuracy] = "power%d_accuracy", + [hwmon_power_cap] = "power%d_cap", + [hwmon_power_cap_hyst] = "power%d_cap_hyst", + [hwmon_power_cap_max] = "power%d_cap_max", + [hwmon_power_cap_min] = "power%d_cap_min", + [hwmon_power_max] = "power%d_max", + [hwmon_power_crit] = "power%d_crit", + [hwmon_power_label] = "power%d_label", + [hwmon_power_alarm] = "power%d_alarm", + [hwmon_power_cap_alarm] = "power%d_cap_alarm", + [hwmon_power_max_alarm] = "power%d_max_alarm", + [hwmon_power_crit_alarm] = "power%d_crit_alarm", +}; + +static const char * const hwmon_energy_attr_templates[] = { + [hwmon_energy_input] = "energy%d_input", + [hwmon_energy_label] = "energy%d_label", +}; + +static const char * const hwmon_humidity_attr_templates[] = { + [hwmon_humidity_input] = "humidity%d_input", + [hwmon_humidity_label] = "humidity%d_label", + [hwmon_humidity_min] = "humidity%d_min", + [hwmon_humidity_min_hyst] = "humidity%d_min_hyst", + [hwmon_humidity_max] = "humidity%d_max", + [hwmon_humidity_max_hyst] = "humidity%d_max_hyst", + [hwmon_humidity_alarm] = "humidity%d_alarm", + [hwmon_humidity_fault] = "humidity%d_fault", +}; + +static const char * const hwmon_fan_attr_templates[] = { + [hwmon_fan_input] = "fan%d_input", + [hwmon_fan_label] = "fan%d_label", + [hwmon_fan_min] = "fan%d_min", + [hwmon_fan_max] = "fan%d_max", + [hwmon_fan_div] = "fan%d_div", + [hwmon_fan_pulses] = "fan%d_pulses", + [hwmon_fan_target] = "fan%d_target", + [hwmon_fan_alarm] = "fan%d_alarm", + [hwmon_fan_min_alarm] = "fan%d_min_alarm", + [hwmon_fan_max_alarm] = "fan%d_max_alarm", + [hwmon_fan_fault] = "fan%d_fault", +}; + +static const char * const hwmon_pwm_attr_templates[] = { + [hwmon_pwm_input] = "pwm%d", + [hwmon_pwm_enable] = "pwm%d_enable", + [hwmon_pwm_mode] = "pwm%d_mode", + [hwmon_pwm_freq] = "pwm%d_freq", +}; + +static const char * const *__templates[] = { + [hwmon_chip] = hwmon_chip_attr_templates, + [hwmon_temp] = hwmon_temp_attr_templates, + [hwmon_in] = hwmon_in_attr_templates, + [hwmon_curr] = hwmon_curr_attr_templates, + [hwmon_power] = hwmon_power_attr_templates, + [hwmon_energy] = hwmon_energy_attr_templates, + [hwmon_humidity] = hwmon_humidity_attr_templates, + [hwmon_fan] = hwmon_fan_attr_templates, + [hwmon_pwm] = hwmon_pwm_attr_templates, +}; + +static const int __templates_size[] = { + [hwmon_chip] = ARRAY_SIZE(hwmon_chip_attr_templates), + [hwmon_temp] = ARRAY_SIZE(hwmon_temp_attr_templates), + [hwmon_in] = ARRAY_SIZE(hwmon_in_attr_templates), + [hwmon_curr] = ARRAY_SIZE(hwmon_curr_attr_templates), + [hwmon_power] = ARRAY_SIZE(hwmon_power_attr_templates), + [hwmon_energy] = ARRAY_SIZE(hwmon_energy_attr_templates), + [hwmon_humidity] = ARRAY_SIZE(hwmon_humidity_attr_templates), + [hwmon_fan] = ARRAY_SIZE(hwmon_fan_attr_templates), + [hwmon_pwm] = ARRAY_SIZE(hwmon_pwm_attr_templates), +}; + +static int hwmon_num_channel_attrs(const struct hwmon_channel_info *info) +{ + int i, n; + + for (i = n = 0; info->config[i]; i++) + n += hweight32(info->config[i]); + + return n; +} + +static int hwmon_genattrs(struct device *dev, + const void *drvdata, + struct attribute **attrs, + const struct hwmon_ops *ops, + const struct hwmon_channel_info *info) +{ + const char * const *templates; + int template_size; + int i, aindex = 0; + + if (info->type >= ARRAY_SIZE(__templates)) + return -EINVAL; + + templates = __templates[info->type]; + template_size = __templates_size[info->type]; + + for (i = 0; info->config[i]; i++) { + u32 attr_mask = info->config[i]; + u32 attr; + + while (attr_mask) { + struct attribute *a; + + attr = __ffs(attr_mask); + attr_mask &= ~BIT(attr); + if (attr >= template_size) + return -EINVAL; + a = hwmon_genattr(dev, drvdata, info->type, attr, i, + templates[attr], ops); + if (IS_ERR(a)) { + if (PTR_ERR(a) != -ENOENT) + return PTR_ERR(a); + continue; + } + attrs[aindex++] = a; + } + } + return aindex; +} + +static struct attribute ** +__hwmon_create_attrs(struct device *dev, const void *drvdata, + const struct hwmon_chip_info *chip) +{ + int ret, i, aindex = 0, nattrs = 0; + struct attribute **attrs; + + for (i = 0; chip->info[i]; i++) + nattrs += hwmon_num_channel_attrs(chip->info[i]); + + if (nattrs == 0) + return ERR_PTR(-EINVAL); + + attrs = devm_kcalloc(dev, nattrs + 1, sizeof(*attrs), GFP_KERNEL); + if (!attrs) + return ERR_PTR(-ENOMEM); + + for (i = 0; chip->info[i]; i++) { + ret = hwmon_genattrs(dev, drvdata, &attrs[aindex], chip->ops, + chip->info[i]); + if (ret < 0) + return ERR_PTR(ret); + aindex += ret; + } + + return attrs; +} + +static struct device * +__hwmon_device_register(struct device *dev, const char *name, void *drvdata, + const struct hwmon_chip_info *chip, + const struct attribute_group **groups) +{ + struct hwmon_device *hwdev; + struct device *hdev; + int i, j, err, id; + + /* Do not accept invalid characters in hwmon name attribute */ + if (name && (!strlen(name) || strpbrk(name, "-* \t\n"))) + return ERR_PTR(-EINVAL); + + id = ida_simple_get(&hwmon_ida, 0, 0, GFP_KERNEL); + if (id < 0) + return ERR_PTR(id); + + hwdev = kzalloc(sizeof(*hwdev), GFP_KERNEL); + if (hwdev == NULL) { + err = -ENOMEM; + goto ida_remove; + } + + hdev = &hwdev->dev; + + if (chip && chip->ops->is_visible) { + struct attribute **attrs; + int ngroups = 2; + + if (groups) + for (i = 0; groups[i]; i++) + ngroups++; + + hwdev->groups = devm_kcalloc(dev, ngroups, sizeof(*groups), + GFP_KERNEL); + if (!hwdev->groups) + return ERR_PTR(-ENOMEM); + + attrs = __hwmon_create_attrs(dev, drvdata, chip); + if (IS_ERR(attrs)) { + err = PTR_ERR(attrs); + goto free_hwmon; + } + + hwdev->group.attrs = attrs; + ngroups = 0; + hwdev->groups[ngroups++] = &hwdev->group; + + if (groups) { + for (i = 0; groups[i]; i++) + hwdev->groups[ngroups++] = groups[i]; + } + + hdev->groups = hwdev->groups; + } else { + hdev->groups = groups; + } + + hwdev->name = name; + hdev->class = &hwmon_class; + hdev->parent = dev; + hdev->of_node = dev ? dev->of_node : NULL; + hwdev->chip = chip; + dev_set_drvdata(hdev, drvdata); + dev_set_name(hdev, HWMON_ID_FORMAT, id); + err = device_register(hdev); + if (err) + goto free_hwmon; + + if (chip && chip->ops->is_visible && chip->ops->read && + chip->info[0]->type == hwmon_chip && + (chip->info[0]->config[0] & HWMON_C_REGISTER_TZ)) { + const struct hwmon_channel_info **info = chip->info; + + for (i = 1; info[i]; i++) { + if (info[i]->type != hwmon_temp) + continue; + + for (j = 0; info[i]->config[j]; j++) { + if (!chip->ops->is_visible(drvdata, hwmon_temp, + hwmon_temp_input, j)) + continue; + if (info[i]->config[j] & HWMON_T_INPUT) + hwmon_thermal_add_sensor(dev, hwdev, j); + } + } + } + + return hdev; + +free_hwmon: + kfree(hwdev); +ida_remove: + ida_simple_remove(&hwmon_ida, id); + return ERR_PTR(err); +} + /** * hwmon_device_register_with_groups - register w/ hwmon * @dev: the parent device @@ -97,44 +615,36 @@ hwmon_device_register_with_groups(struct device *dev, const char *name, void *drvdata, const struct attribute_group **groups) { - struct hwmon_device *hwdev; - int err, id; - - /* Do not accept invalid characters in hwmon name attribute */ - if (name && (!strlen(name) || strpbrk(name, "-* \t\n"))) - return ERR_PTR(-EINVAL); - - id = ida_simple_get(&hwmon_ida, 0, 0, GFP_KERNEL); - if (id < 0) - return ERR_PTR(id); - - hwdev = kzalloc(sizeof(*hwdev), GFP_KERNEL); - if (hwdev == NULL) { - err = -ENOMEM; - goto ida_remove; - } - - hwdev->name = name; - hwdev->dev.class = &hwmon_class; - hwdev->dev.parent = dev; - hwdev->dev.groups = groups; - hwdev->dev.of_node = dev ? dev->of_node : NULL; - dev_set_drvdata(&hwdev->dev, drvdata); - dev_set_name(&hwdev->dev, HWMON_ID_FORMAT, id); - err = device_register(&hwdev->dev); - if (err) - goto free; - - return &hwdev->dev; - -free: - kfree(hwdev); -ida_remove: - ida_simple_remove(&hwmon_ida, id); - return ERR_PTR(err); + return __hwmon_device_register(dev, name, drvdata, NULL, groups); } EXPORT_SYMBOL_GPL(hwmon_device_register_with_groups); +/** + * hwmon_device_register_with_info - register w/ hwmon + * @dev: the parent device + * @name: hwmon name attribute + * @drvdata: driver data to attach to created device + * @info: Pointer to hwmon chip information + * @groups - pointer to list of driver specific attribute groups + * + * hwmon_device_unregister() must be called when the device is no + * longer needed. + * + * Returns the pointer to the new device. + */ +struct device * +hwmon_device_register_with_info(struct device *dev, const char *name, + void *drvdata, + const struct hwmon_chip_info *chip, + const struct attribute_group **groups) +{ + if (chip && (!chip->ops || !chip->info)) + return ERR_PTR(-EINVAL); + + return __hwmon_device_register(dev, name, drvdata, chip, groups); +} +EXPORT_SYMBOL_GPL(hwmon_device_register_with_info); + /** * hwmon_device_register - register w/ hwmon * @dev: the device to register @@ -213,6 +723,48 @@ error: } EXPORT_SYMBOL_GPL(devm_hwmon_device_register_with_groups); +/** + * devm_hwmon_device_register_with_info - register w/ hwmon + * @dev: the parent device + * @name: hwmon name attribute + * @drvdata: driver data to attach to created device + * @info: Pointer to hwmon chip information + * @groups - pointer to list of driver specific attribute groups + * + * Returns the pointer to the new device. The new device is automatically + * unregistered with the parent device. + */ +struct device * +devm_hwmon_device_register_with_info(struct device *dev, const char *name, + void *drvdata, + const struct hwmon_chip_info *chip, + const struct attribute_group **groups) +{ + struct device **ptr, *hwdev; + + if (!dev) + return ERR_PTR(-EINVAL); + + ptr = devres_alloc(devm_hwmon_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + hwdev = hwmon_device_register_with_info(dev, name, drvdata, chip, + groups); + if (IS_ERR(hwdev)) + goto error; + + *ptr = hwdev; + devres_add(dev, ptr); + + return hwdev; + +error: + devres_free(ptr); + return hwdev; +} +EXPORT_SYMBOL_GPL(devm_hwmon_device_register_with_info); + static int devm_hwmon_match(struct device *dev, void *res, void *data) { struct device **hwdev = res; diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c index 55b5a8ff1cfe..6d2e6605751c 100644 --- a/drivers/hwmon/ibmpowernv.c +++ b/drivers/hwmon/ibmpowernv.c @@ -143,13 +143,11 @@ static void __init make_sensor_label(struct device_node *np, if (cpuid >= 0) /* * The digital thermal sensors are associated - * with a core. Let's print out the range of - * cpu ids corresponding to the hardware - * threads of the core. + * with a core. */ n += snprintf(sdata->label + n, - sizeof(sdata->label) - n, " %d-%d", - cpuid, cpuid + threads_per_core - 1); + sizeof(sdata->label) - n, " %d", + cpuid); else n += snprintf(sdata->label + n, sizeof(sdata->label) - n, " phy%d", id); diff --git a/drivers/hwmon/iio_hwmon.c b/drivers/hwmon/iio_hwmon.c index 89449871bca7..f6a76679c650 100644 --- a/drivers/hwmon/iio_hwmon.c +++ b/drivers/hwmon/iio_hwmon.c @@ -73,8 +73,11 @@ static int iio_hwmon_probe(struct platform_device *pdev) name = dev->of_node->name; channels = iio_channel_get_all(dev); - if (IS_ERR(channels)) + if (IS_ERR(channels)) { + if (PTR_ERR(channels) == -ENODEV) + return -EPROBE_DEFER; return PTR_ERR(channels); + } st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL); if (st == NULL) { diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 4667012b46b7..ad82cb28d87a 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -2011,10 +2011,10 @@ static struct attribute *it87_attributes_in[] = { &sensor_dev_attr_in7_beep.dev_attr.attr, /* 39 */ &sensor_dev_attr_in8_input.dev_attr.attr, /* 40 */ - &sensor_dev_attr_in9_input.dev_attr.attr, /* 41 */ - &sensor_dev_attr_in10_input.dev_attr.attr, /* 41 */ - &sensor_dev_attr_in11_input.dev_attr.attr, /* 41 */ - &sensor_dev_attr_in12_input.dev_attr.attr, /* 41 */ + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in11_input.dev_attr.attr, + &sensor_dev_attr_in12_input.dev_attr.attr, NULL }; diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index 9d5f85f3384f..1bf22eff0b08 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include @@ -254,170 +253,148 @@ abort: return ret; } -/* sysfs functions */ - -static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, - char *buf) +static int jc42_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct jc42_data *data = jc42_update_device(dev); - if (IS_ERR(data)) - return PTR_ERR(data); - return sprintf(buf, "%d\n", - jc42_temp_from_reg(data->temp[attr->index])); -} - -static ssize_t show_temp_hyst(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct jc42_data *data = jc42_update_device(dev); int temp, hyst; if (IS_ERR(data)) return PTR_ERR(data); - temp = jc42_temp_from_reg(data->temp[attr->index]); - hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK) - >> JC42_CFG_HYST_SHIFT]; - return sprintf(buf, "%d\n", temp - hyst); + switch (attr) { + case hwmon_temp_input: + *val = jc42_temp_from_reg(data->temp[t_input]); + return 0; + case hwmon_temp_min: + *val = jc42_temp_from_reg(data->temp[t_min]); + return 0; + case hwmon_temp_max: + *val = jc42_temp_from_reg(data->temp[t_max]); + return 0; + case hwmon_temp_crit: + *val = jc42_temp_from_reg(data->temp[t_crit]); + return 0; + case hwmon_temp_max_hyst: + temp = jc42_temp_from_reg(data->temp[t_max]); + hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK) + >> JC42_CFG_HYST_SHIFT]; + *val = temp - hyst; + return 0; + case hwmon_temp_crit_hyst: + temp = jc42_temp_from_reg(data->temp[t_crit]); + hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK) + >> JC42_CFG_HYST_SHIFT]; + *val = temp - hyst; + return 0; + case hwmon_temp_min_alarm: + *val = (data->temp[t_input] >> JC42_ALARM_MIN_BIT) & 1; + return 0; + case hwmon_temp_max_alarm: + *val = (data->temp[t_input] >> JC42_ALARM_MAX_BIT) & 1; + return 0; + case hwmon_temp_crit_alarm: + *val = (data->temp[t_input] >> JC42_ALARM_CRIT_BIT) & 1; + return 0; + default: + return -EOPNOTSUPP; + } } -static ssize_t set_temp(struct device *dev, struct device_attribute *devattr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct jc42_data *data = dev_get_drvdata(dev); - int err, ret = count; - int nr = attr->index; - long val; - - if (kstrtol(buf, 10, &val) < 0) - return -EINVAL; - mutex_lock(&data->update_lock); - data->temp[nr] = jc42_temp_to_reg(val, data->extended); - err = i2c_smbus_write_word_swapped(data->client, temp_regs[nr], - data->temp[nr]); - if (err < 0) - ret = err; - mutex_unlock(&data->update_lock); - return ret; -} - -/* - * JC42.4 compliant chips only support four hysteresis values. - * Pick best choice and go from there. - */ -static ssize_t set_temp_crit_hyst(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static int jc42_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) { struct jc42_data *data = dev_get_drvdata(dev); - long val; + struct i2c_client *client = data->client; int diff, hyst; - int err; - int ret = count; + int ret; - if (kstrtol(buf, 10, &val) < 0) - return -EINVAL; + mutex_lock(&data->update_lock); - val = clamp_val(val, (data->extended ? JC42_TEMP_MIN_EXTENDED : - JC42_TEMP_MIN) - 6000, JC42_TEMP_MAX); - diff = jc42_temp_from_reg(data->temp[t_crit]) - val; - - hyst = 0; - if (diff > 0) { - if (diff < 2250) - hyst = 1; /* 1.5 degrees C */ - else if (diff < 4500) - hyst = 2; /* 3.0 degrees C */ - else - hyst = 3; /* 6.0 degrees C */ + switch (attr) { + case hwmon_temp_min: + data->temp[t_min] = jc42_temp_to_reg(val, data->extended); + ret = i2c_smbus_write_word_swapped(client, temp_regs[t_min], + data->temp[t_min]); + break; + case hwmon_temp_max: + data->temp[t_max] = jc42_temp_to_reg(val, data->extended); + ret = i2c_smbus_write_word_swapped(client, temp_regs[t_max], + data->temp[t_max]); + break; + case hwmon_temp_crit: + data->temp[t_crit] = jc42_temp_to_reg(val, data->extended); + ret = i2c_smbus_write_word_swapped(client, temp_regs[t_crit], + data->temp[t_crit]); + break; + case hwmon_temp_crit_hyst: + /* + * JC42.4 compliant chips only support four hysteresis values. + * Pick best choice and go from there. + */ + val = clamp_val(val, (data->extended ? JC42_TEMP_MIN_EXTENDED + : JC42_TEMP_MIN) - 6000, + JC42_TEMP_MAX); + diff = jc42_temp_from_reg(data->temp[t_crit]) - val; + hyst = 0; + if (diff > 0) { + if (diff < 2250) + hyst = 1; /* 1.5 degrees C */ + else if (diff < 4500) + hyst = 2; /* 3.0 degrees C */ + else + hyst = 3; /* 6.0 degrees C */ + } + data->config = (data->config & ~JC42_CFG_HYST_MASK) | + (hyst << JC42_CFG_HYST_SHIFT); + ret = i2c_smbus_write_word_swapped(data->client, + JC42_REG_CONFIG, + data->config); + break; + default: + ret = -EOPNOTSUPP; + break; } - mutex_lock(&data->update_lock); - data->config = (data->config & ~JC42_CFG_HYST_MASK) - | (hyst << JC42_CFG_HYST_SHIFT); - err = i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG, - data->config); - if (err < 0) - ret = err; mutex_unlock(&data->update_lock); + return ret; } -static ssize_t show_alarm(struct device *dev, - struct device_attribute *attr, char *buf) +static umode_t jc42_is_visible(const void *_data, enum hwmon_sensor_types type, + u32 attr, int channel) { - u16 bit = to_sensor_dev_attr(attr)->index; - struct jc42_data *data = jc42_update_device(dev); - u16 val; - - if (IS_ERR(data)) - return PTR_ERR(data); - - val = data->temp[t_input]; - if (bit != JC42_ALARM_CRIT_BIT && (data->config & JC42_CFG_CRIT_ONLY)) - val = 0; - return sprintf(buf, "%u\n", (val >> bit) & 1); -} - -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, t_input); -static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, set_temp, t_crit); -static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp, set_temp, t_min); -static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, set_temp, t_max); - -static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_hyst, - set_temp_crit_hyst, t_crit); -static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_temp_hyst, NULL, t_max); - -static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, - JC42_ALARM_CRIT_BIT); -static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, - JC42_ALARM_MIN_BIT); -static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, - JC42_ALARM_MAX_BIT); - -static struct attribute *jc42_attributes[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp1_crit.dev_attr.attr, - &sensor_dev_attr_temp1_min.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, - &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, - &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, - &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, - &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, - NULL -}; - -static umode_t jc42_attribute_mode(struct kobject *kobj, - struct attribute *attr, int index) -{ - struct device *dev = container_of(kobj, struct device, kobj); - struct jc42_data *data = dev_get_drvdata(dev); + const struct jc42_data *data = _data; unsigned int config = data->config; - bool readonly; + umode_t mode = S_IRUGO; - if (attr == &sensor_dev_attr_temp1_crit.dev_attr.attr) - readonly = config & JC42_CFG_TCRIT_LOCK; - else if (attr == &sensor_dev_attr_temp1_min.dev_attr.attr || - attr == &sensor_dev_attr_temp1_max.dev_attr.attr) - readonly = config & JC42_CFG_EVENT_LOCK; - else if (attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr) - readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK); - else - readonly = true; - - return S_IRUGO | (readonly ? 0 : S_IWUSR); + switch (attr) { + case hwmon_temp_min: + case hwmon_temp_max: + if (!(config & JC42_CFG_EVENT_LOCK)) + mode |= S_IWUSR; + break; + case hwmon_temp_crit: + if (!(config & JC42_CFG_TCRIT_LOCK)) + mode |= S_IWUSR; + break; + case hwmon_temp_crit_hyst: + if (!(config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK))) + mode |= S_IWUSR; + break; + case hwmon_temp_input: + case hwmon_temp_max_hyst: + case hwmon_temp_min_alarm: + case hwmon_temp_max_alarm: + case hwmon_temp_crit_alarm: + break; + default: + mode = 0; + break; + } + return mode; } -static const struct attribute_group jc42_group = { - .attrs = jc42_attributes, - .is_visible = jc42_attribute_mode, -}; -__ATTRIBUTE_GROUPS(jc42); - /* Return 0 if detection is successful, -ENODEV otherwise */ static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info) { @@ -450,6 +427,34 @@ static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info) return -ENODEV; } +static const u32 jc42_temp_config[] = { + HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_CRIT | + HWMON_T_MAX_HYST | HWMON_T_CRIT_HYST | + HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM, + 0 +}; + +static const struct hwmon_channel_info jc42_temp = { + .type = hwmon_temp, + .config = jc42_temp_config, +}; + +static const struct hwmon_channel_info *jc42_info[] = { + &jc42_temp, + NULL +}; + +static const struct hwmon_ops jc42_hwmon_ops = { + .is_visible = jc42_is_visible, + .read = jc42_read, + .write = jc42_write, +}; + +static const struct hwmon_chip_info jc42_chip_info = { + .ops = &jc42_hwmon_ops, + .info = jc42_info, +}; + static int jc42_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device *dev = &client->dev; @@ -482,9 +487,9 @@ static int jc42_probe(struct i2c_client *client, const struct i2c_device_id *id) } data->config = config; - hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, - data, - jc42_groups); + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, + data, &jc42_chip_info, + NULL); return PTR_ERR_OR_ZERO(hwmon_dev); } diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 92f9d4bbf597..eff3b24d8473 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -28,7 +28,6 @@ #include #include #include -#include #include "lm75.h" @@ -88,56 +87,75 @@ static inline long lm75_reg_to_mc(s16 temp, u8 resolution) return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); } -/* sysfs attributes for hwmon */ - -static int lm75_read_temp(void *dev, int *temp) +static int lm75_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) { struct lm75_data *data = dev_get_drvdata(dev); - unsigned int _temp; - int err; + unsigned int regval; + int err, reg; - err = regmap_read(data->regmap, LM75_REG_TEMP, &_temp); - if (err < 0) - return err; - - *temp = lm75_reg_to_mc(_temp, data->resolution); + switch (type) { + case hwmon_chip: + switch (attr) { + case hwmon_chip_update_interval: + *val = data->sample_time; + break;; + default: + return -EINVAL; + } + break; + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + reg = LM75_REG_TEMP; + break; + case hwmon_temp_max: + reg = LM75_REG_MAX; + break; + case hwmon_temp_max_hyst: + reg = LM75_REG_HYST; + break; + default: + return -EINVAL; + } + err = regmap_read(data->regmap, reg, ®val); + if (err < 0) + return err; + *val = lm75_reg_to_mc(regval, data->resolution); + break; + default: + return -EINVAL; + } return 0; } -static ssize_t show_temp(struct device *dev, struct device_attribute *da, - char *buf) +static int lm75_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long temp) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct lm75_data *data = dev_get_drvdata(dev); - unsigned int temp = 0; - int err; - - err = regmap_read(data->regmap, attr->index, &temp); - if (err < 0) - return err; - - return sprintf(buf, "%ld\n", lm75_reg_to_mc(temp, data->resolution)); -} - -static ssize_t set_temp(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - struct lm75_data *data = dev_get_drvdata(dev); - long temp; - int error; u8 resolution; + int reg; - error = kstrtol(buf, 10, &temp); - if (error) - return error; + if (type != hwmon_temp) + return -EINVAL; + + switch (attr) { + case hwmon_temp_max: + reg = LM75_REG_MAX; + break; + case hwmon_temp_max_hyst: + reg = LM75_REG_HYST; + break; + default: + return -EINVAL; + } /* * Resolution of limit registers is assumed to be the same as the * temperature input register resolution unless given explicitly. */ - if (attr->index && data->resolution_limits) + if (data->resolution_limits) resolution = data->resolution_limits; else resolution = data->resolution; @@ -145,46 +163,78 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *da, temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX); temp = DIV_ROUND_CLOSEST(temp << (resolution - 8), 1000) << (16 - resolution); - error = regmap_write(data->regmap, attr->index, temp); - if (error < 0) - return error; - return count; + return regmap_write(data->regmap, reg, temp); } -static ssize_t show_update_interval(struct device *dev, - struct device_attribute *da, char *buf) +static umode_t lm75_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) { - struct lm75_data *data = dev_get_drvdata(dev); - - return sprintf(buf, "%u\n", data->sample_time); + switch (type) { + case hwmon_chip: + switch (attr) { + case hwmon_chip_update_interval: + return S_IRUGO; + } + break; + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + return S_IRUGO; + case hwmon_temp_max: + case hwmon_temp_max_hyst: + return S_IRUGO | S_IWUSR; + } + break; + default: + break; + } + return 0; } -static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, - show_temp, set_temp, LM75_REG_MAX); -static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, - show_temp, set_temp, LM75_REG_HYST); -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, LM75_REG_TEMP); -static DEVICE_ATTR(update_interval, S_IRUGO, show_update_interval, NULL); - -static struct attribute *lm75_attrs[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, - &dev_attr_update_interval.attr, - - NULL -}; -ATTRIBUTE_GROUPS(lm75); - -static const struct thermal_zone_of_device_ops lm75_of_thermal_ops = { - .get_temp = lm75_read_temp, -}; - /*-----------------------------------------------------------------------*/ /* device probe and removal */ +/* chip configuration */ + +static const u32 lm75_chip_config[] = { + HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL, + 0 +}; + +static const struct hwmon_channel_info lm75_chip = { + .type = hwmon_chip, + .config = lm75_chip_config, +}; + +static const u32 lm75_temp_config[] = { + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST, + 0 +}; + +static const struct hwmon_channel_info lm75_temp = { + .type = hwmon_temp, + .config = lm75_temp_config, +}; + +static const struct hwmon_channel_info *lm75_info[] = { + &lm75_chip, + &lm75_temp, + NULL +}; + +static const struct hwmon_ops lm75_hwmon_ops = { + .is_visible = lm75_is_visible, + .read = lm75_read, + .write = lm75_write, +}; + +static const struct hwmon_chip_info lm75_chip_info = { + .ops = &lm75_hwmon_ops, + .info = lm75_info, +}; + static bool lm75_is_writeable_reg(struct device *dev, unsigned int reg) { return reg != LM75_REG_TEMP; @@ -337,15 +387,12 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) dev_dbg(dev, "Config %02x\n", new); - hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, - data, lm75_groups); + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, + data, &lm75_chip_info, + NULL); if (IS_ERR(hwmon_dev)) return PTR_ERR(hwmon_dev); - devm_thermal_zone_of_sensor_register(hwmon_dev, 0, - hwmon_dev, - &lm75_of_thermal_ops); - dev_info(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), client->name); return 0; diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 496e771b363f..322ed9272811 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -89,7 +89,6 @@ #include #include #include -#include #include #include #include @@ -326,7 +325,7 @@ static const struct lm90_params lm90_params[] = { .alert_alarms = 0x7c, .max_convrate = 9, .reg_local_ext = TMP451_REG_R_LOCAL_TEMPL, - } + }, }; /* @@ -365,7 +364,10 @@ enum lm90_temp11_reg_index { struct lm90_data { struct i2c_client *client; - const struct attribute_group *groups[6]; + u32 channel_config[4]; + struct hwmon_channel_info temp_info; + const struct hwmon_channel_info *info[3]; + struct hwmon_chip_info chip; struct mutex update_lock; bool valid; /* true if register values are valid */ unsigned long last_updated; /* in jiffies */ @@ -489,11 +491,11 @@ static inline int lm90_select_remote_channel(struct i2c_client *client, * client->update_lock must be held when calling this function (unless we are * in detection or initialization steps). */ -static void lm90_set_convrate(struct i2c_client *client, struct lm90_data *data, - unsigned int interval) +static int lm90_set_convrate(struct i2c_client *client, struct lm90_data *data, + unsigned int interval) { - int i; unsigned int update_interval; + int i, err; /* Shift calculations to avoid rounding errors */ interval <<= 6; @@ -504,8 +506,9 @@ static void lm90_set_convrate(struct i2c_client *client, struct lm90_data *data, if (interval >= update_interval * 3 / 4) break; - i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE, i); + err = i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE, i); data->update_interval = DIV_ROUND_CLOSEST(update_interval, 64); + return err; } static int lm90_update_limits(struct device *dev) @@ -604,19 +607,17 @@ static int lm90_update_limits(struct device *dev) return 0; } -static struct lm90_data *lm90_update_device(struct device *dev) +static int lm90_update_device(struct device *dev) { struct lm90_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; unsigned long next_update; - int val = 0; - - mutex_lock(&data->update_lock); + int val; if (!data->valid) { val = lm90_update_limits(dev); if (val < 0) - goto error; + return val; } next_update = data->last_updated + @@ -628,53 +629,55 @@ static struct lm90_data *lm90_update_device(struct device *dev) val = lm90_read_reg(client, LM90_REG_R_LOCAL_LOW); if (val < 0) - goto error; + return val; data->temp8[LOCAL_LOW] = val; val = lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH); if (val < 0) - goto error; + return val; data->temp8[LOCAL_HIGH] = val; if (data->reg_local_ext) { val = lm90_read16(client, LM90_REG_R_LOCAL_TEMP, data->reg_local_ext); if (val < 0) - goto error; + return val; data->temp11[LOCAL_TEMP] = val; } else { val = lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP); if (val < 0) - goto error; + return val; data->temp11[LOCAL_TEMP] = val << 8; } val = lm90_read16(client, LM90_REG_R_REMOTE_TEMPH, LM90_REG_R_REMOTE_TEMPL); if (val < 0) - goto error; + return val; data->temp11[REMOTE_TEMP] = val; val = lm90_read_reg(client, LM90_REG_R_STATUS); if (val < 0) - goto error; + return val; data->alarms = val; /* lower 8 bit of alarms */ if (data->kind == max6696) { val = lm90_select_remote_channel(client, data, 1); if (val < 0) - goto error; + return val; val = lm90_read16(client, LM90_REG_R_REMOTE_TEMPH, LM90_REG_R_REMOTE_TEMPL); - if (val < 0) - goto error; + if (val < 0) { + lm90_select_remote_channel(client, data, 0); + return val; + } data->temp11[REMOTE2_TEMP] = val; lm90_select_remote_channel(client, data, 0); val = lm90_read_reg(client, MAX6696_REG_R_STATUS2); if (val < 0) - goto error; + return val; data->alarms |= val << 8; } @@ -686,7 +689,7 @@ static struct lm90_data *lm90_update_device(struct device *dev) !(data->alarms & data->alert_alarms)) { val = lm90_read_reg(client, LM90_REG_R_CONFIG1); if (val < 0) - goto error; + return val; if (val & 0x80) { dev_dbg(&client->dev, "Re-enabling ALERT#\n"); @@ -700,13 +703,7 @@ static struct lm90_data *lm90_update_device(struct device *dev) data->valid = true; } -error: - mutex_unlock(&data->update_lock); - - if (val < 0) - return ERR_PTR(val); - - return data; + return 0; } /* @@ -832,422 +829,12 @@ static u16 temp_to_u16_adt7461(struct lm90_data *data, long val) return (val + 125) / 250 * 64; } -/* - * Sysfs stuff - */ - -static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct lm90_data *data = lm90_update_device(dev); - int temp; - - if (IS_ERR(data)) - return PTR_ERR(data); - - if (data->kind == adt7461 || data->kind == tmp451) - temp = temp_from_u8_adt7461(data, data->temp8[attr->index]); - else if (data->kind == max6646) - temp = temp_from_u8(data->temp8[attr->index]); - else - temp = temp_from_s8(data->temp8[attr->index]); - - /* +16 degrees offset for temp2 for the LM99 */ - if (data->kind == lm99 && attr->index == 3) - temp += 16000; - - return sprintf(buf, "%d\n", temp); -} - -static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, - const char *buf, size_t count) -{ - static const u8 reg[TEMP8_REG_NUM] = { - LM90_REG_W_LOCAL_LOW, - LM90_REG_W_LOCAL_HIGH, - LM90_REG_W_LOCAL_CRIT, - LM90_REG_W_REMOTE_CRIT, - MAX6659_REG_W_LOCAL_EMERG, - MAX6659_REG_W_REMOTE_EMERG, - LM90_REG_W_REMOTE_CRIT, - MAX6659_REG_W_REMOTE_EMERG, - }; - - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct lm90_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - int nr = attr->index; - long val; - int err; - - err = kstrtol(buf, 10, &val); - if (err < 0) - return err; - - /* +16 degrees offset for temp2 for the LM99 */ - if (data->kind == lm99 && attr->index == 3) - val -= 16000; - - mutex_lock(&data->update_lock); - if (data->kind == adt7461 || data->kind == tmp451) - data->temp8[nr] = temp_to_u8_adt7461(data, val); - else if (data->kind == max6646) - data->temp8[nr] = temp_to_u8(val); - else - data->temp8[nr] = temp_to_s8(val); - - lm90_select_remote_channel(client, data, nr >= 6); - i2c_smbus_write_byte_data(client, reg[nr], data->temp8[nr]); - lm90_select_remote_channel(client, data, 0); - - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); - struct lm90_data *data = lm90_update_device(dev); - int temp; - - if (IS_ERR(data)) - return PTR_ERR(data); - - if (data->kind == adt7461 || data->kind == tmp451) - temp = temp_from_u16_adt7461(data, data->temp11[attr->index]); - else if (data->kind == max6646) - temp = temp_from_u16(data->temp11[attr->index]); - else - temp = temp_from_s16(data->temp11[attr->index]); - - /* +16 degrees offset for temp2 for the LM99 */ - if (data->kind == lm99 && attr->index <= 2) - temp += 16000; - - return sprintf(buf, "%d\n", temp); -} - -static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, - const char *buf, size_t count) -{ - struct { - u8 high; - u8 low; - int channel; - } reg[5] = { - { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL, 0 }, - { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, 0 }, - { LM90_REG_W_REMOTE_OFFSH, LM90_REG_W_REMOTE_OFFSL, 0 }, - { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL, 1 }, - { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, 1 } - }; - - struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); - struct lm90_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - int nr = attr->nr; - int index = attr->index; - long val; - int err; - - err = kstrtol(buf, 10, &val); - if (err < 0) - return err; - - /* +16 degrees offset for temp2 for the LM99 */ - if (data->kind == lm99 && index <= 2) - val -= 16000; - - mutex_lock(&data->update_lock); - if (data->kind == adt7461 || data->kind == tmp451) - data->temp11[index] = temp_to_u16_adt7461(data, val); - else if (data->kind == max6646) - data->temp11[index] = temp_to_u8(val) << 8; - else if (data->flags & LM90_HAVE_REM_LIMIT_EXT) - data->temp11[index] = temp_to_s16(val); - else - data->temp11[index] = temp_to_s8(val) << 8; - - lm90_select_remote_channel(client, data, reg[nr].channel); - i2c_smbus_write_byte_data(client, reg[nr].high, - data->temp11[index] >> 8); - if (data->flags & LM90_HAVE_REM_LIMIT_EXT) - i2c_smbus_write_byte_data(client, reg[nr].low, - data->temp11[index] & 0xff); - lm90_select_remote_channel(client, data, 0); - - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_temphyst(struct device *dev, - struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct lm90_data *data = lm90_update_device(dev); - int temp; - - if (IS_ERR(data)) - return PTR_ERR(data); - - if (data->kind == adt7461 || data->kind == tmp451) - temp = temp_from_u8_adt7461(data, data->temp8[attr->index]); - else if (data->kind == max6646) - temp = temp_from_u8(data->temp8[attr->index]); - else - temp = temp_from_s8(data->temp8[attr->index]); - - /* +16 degrees offset for temp2 for the LM99 */ - if (data->kind == lm99 && attr->index == 3) - temp += 16000; - - return sprintf(buf, "%d\n", temp - temp_from_s8(data->temp_hyst)); -} - -static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy, - const char *buf, size_t count) -{ - struct lm90_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - long val; - int err; - int temp; - - err = kstrtol(buf, 10, &val); - if (err < 0) - return err; - - mutex_lock(&data->update_lock); - if (data->kind == adt7461 || data->kind == tmp451) - temp = temp_from_u8_adt7461(data, data->temp8[LOCAL_CRIT]); - else if (data->kind == max6646) - temp = temp_from_u8(data->temp8[LOCAL_CRIT]); - else - temp = temp_from_s8(data->temp8[LOCAL_CRIT]); - - data->temp_hyst = hyst_to_reg(temp - val); - i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST, - data->temp_hyst); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, - char *buf) -{ - struct lm90_data *data = lm90_update_device(dev); - - if (IS_ERR(data)) - return PTR_ERR(data); - - return sprintf(buf, "%d\n", data->alarms); -} - -static ssize_t show_alarm(struct device *dev, struct device_attribute - *devattr, char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct lm90_data *data = lm90_update_device(dev); - int bitnr = attr->index; - - if (IS_ERR(data)) - return PTR_ERR(data); - - return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); -} - -static ssize_t show_update_interval(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct lm90_data *data = dev_get_drvdata(dev); - - return sprintf(buf, "%u\n", data->update_interval); -} - -static ssize_t set_update_interval(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct lm90_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - unsigned long val; - int err; - - err = kstrtoul(buf, 10, &val); - if (err) - return err; - - mutex_lock(&data->update_lock); - lm90_set_convrate(client, data, clamp_val(val, 0, 100000)); - mutex_unlock(&data->update_lock); - - return count; -} - -static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp11, NULL, - 0, LOCAL_TEMP); -static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp11, NULL, - 0, REMOTE_TEMP); -static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, LOCAL_LOW); -static SENSOR_DEVICE_ATTR_2(temp2_min, S_IWUSR | S_IRUGO, show_temp11, - set_temp11, 0, REMOTE_LOW); -static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, LOCAL_HIGH); -static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp11, - set_temp11, 1, REMOTE_HIGH); -static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, LOCAL_CRIT); -static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, REMOTE_CRIT); -static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst, - set_temphyst, LOCAL_CRIT); -static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, - REMOTE_CRIT); -static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IWUSR | S_IRUGO, show_temp11, - set_temp11, 2, REMOTE_OFFSET); - -/* Individual alarm files */ -static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0); -static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 1); -static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2); -static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3); -static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4); -static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 5); -static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6); -/* Raw alarm file for compatibility */ -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval, - set_update_interval); - -static struct attribute *lm90_attributes[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp2_input.dev_attr.attr, - &sensor_dev_attr_temp1_min.dev_attr.attr, - &sensor_dev_attr_temp2_min.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp2_max.dev_attr.attr, - &sensor_dev_attr_temp1_crit.dev_attr.attr, - &sensor_dev_attr_temp2_crit.dev_attr.attr, - &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, - &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, - - &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_fault.dev_attr.attr, - &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, - &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, - &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, - &dev_attr_alarms.attr, - &dev_attr_update_interval.attr, - NULL -}; - -static const struct attribute_group lm90_group = { - .attrs = lm90_attributes, -}; - -static struct attribute *lm90_temp2_offset_attributes[] = { - &sensor_dev_attr_temp2_offset.dev_attr.attr, - NULL -}; - -static const struct attribute_group lm90_temp2_offset_group = { - .attrs = lm90_temp2_offset_attributes, -}; - -/* - * Additional attributes for devices with emergency sensors - */ -static SENSOR_DEVICE_ATTR(temp1_emergency, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, LOCAL_EMERG); -static SENSOR_DEVICE_ATTR(temp2_emergency, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, REMOTE_EMERG); -static SENSOR_DEVICE_ATTR(temp1_emergency_hyst, S_IRUGO, show_temphyst, - NULL, LOCAL_EMERG); -static SENSOR_DEVICE_ATTR(temp2_emergency_hyst, S_IRUGO, show_temphyst, - NULL, REMOTE_EMERG); - -static struct attribute *lm90_emergency_attributes[] = { - &sensor_dev_attr_temp1_emergency.dev_attr.attr, - &sensor_dev_attr_temp2_emergency.dev_attr.attr, - &sensor_dev_attr_temp1_emergency_hyst.dev_attr.attr, - &sensor_dev_attr_temp2_emergency_hyst.dev_attr.attr, - NULL -}; - -static const struct attribute_group lm90_emergency_group = { - .attrs = lm90_emergency_attributes, -}; - -static SENSOR_DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO, show_alarm, NULL, 15); -static SENSOR_DEVICE_ATTR(temp2_emergency_alarm, S_IRUGO, show_alarm, NULL, 13); - -static struct attribute *lm90_emergency_alarm_attributes[] = { - &sensor_dev_attr_temp1_emergency_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_emergency_alarm.dev_attr.attr, - NULL -}; - -static const struct attribute_group lm90_emergency_alarm_group = { - .attrs = lm90_emergency_alarm_attributes, -}; - -/* - * Additional attributes for devices with 3 temperature sensors - */ -static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp11, NULL, - 0, REMOTE2_TEMP); -static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp11, - set_temp11, 3, REMOTE2_LOW); -static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp11, - set_temp11, 4, REMOTE2_HIGH); -static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, REMOTE2_CRIT); -static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temphyst, NULL, - REMOTE2_CRIT); -static SENSOR_DEVICE_ATTR(temp3_emergency, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, REMOTE2_EMERG); -static SENSOR_DEVICE_ATTR(temp3_emergency_hyst, S_IRUGO, show_temphyst, - NULL, REMOTE2_EMERG); - -static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 9); -static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 10); -static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_alarm, NULL, 11); -static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 12); -static SENSOR_DEVICE_ATTR(temp3_emergency_alarm, S_IRUGO, show_alarm, NULL, 14); - -static struct attribute *lm90_temp3_attributes[] = { - &sensor_dev_attr_temp3_input.dev_attr.attr, - &sensor_dev_attr_temp3_min.dev_attr.attr, - &sensor_dev_attr_temp3_max.dev_attr.attr, - &sensor_dev_attr_temp3_crit.dev_attr.attr, - &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr, - &sensor_dev_attr_temp3_emergency.dev_attr.attr, - &sensor_dev_attr_temp3_emergency_hyst.dev_attr.attr, - - &sensor_dev_attr_temp3_fault.dev_attr.attr, - &sensor_dev_attr_temp3_min_alarm.dev_attr.attr, - &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, - &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, - &sensor_dev_attr_temp3_emergency_alarm.dev_attr.attr, - NULL -}; - -static const struct attribute_group lm90_temp3_group = { - .attrs = lm90_temp3_attributes, -}; - /* pec used for ADM1032 only */ static ssize_t show_pec(struct device *dev, struct device_attribute *dummy, char *buf) { struct i2c_client *client = to_i2c_client(dev); + return sprintf(buf, "%d\n", !!(client->flags & I2C_CLIENT_PEC)); } @@ -1278,9 +865,431 @@ static ssize_t set_pec(struct device *dev, struct device_attribute *dummy, static DEVICE_ATTR(pec, S_IWUSR | S_IRUGO, show_pec, set_pec); -/* - * Real code - */ +static int lm90_get_temp11(struct lm90_data *data, int index) +{ + s16 temp11 = data->temp11[index]; + int temp; + + if (data->kind == adt7461 || data->kind == tmp451) + temp = temp_from_u16_adt7461(data, temp11); + else if (data->kind == max6646) + temp = temp_from_u16(temp11); + else + temp = temp_from_s16(temp11); + + /* +16 degrees offset for temp2 for the LM99 */ + if (data->kind == lm99 && index <= 2) + temp += 16000; + + return temp; +} + +static int lm90_set_temp11(struct lm90_data *data, int index, long val) +{ + static struct reg { + u8 high; + u8 low; + } reg[] = { + [REMOTE_LOW] = { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL }, + [REMOTE_HIGH] = { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL }, + [REMOTE_OFFSET] = { LM90_REG_W_REMOTE_OFFSH, LM90_REG_W_REMOTE_OFFSL }, + [REMOTE2_LOW] = { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL }, + [REMOTE2_HIGH] = { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL } + }; + struct i2c_client *client = data->client; + struct reg *regp = ®[index]; + int err; + + /* +16 degrees offset for temp2 for the LM99 */ + if (data->kind == lm99 && index <= 2) + val -= 16000; + + if (data->kind == adt7461 || data->kind == tmp451) + data->temp11[index] = temp_to_u16_adt7461(data, val); + else if (data->kind == max6646) + data->temp11[index] = temp_to_u8(val) << 8; + else if (data->flags & LM90_HAVE_REM_LIMIT_EXT) + data->temp11[index] = temp_to_s16(val); + else + data->temp11[index] = temp_to_s8(val) << 8; + + lm90_select_remote_channel(client, data, index >= 3); + err = i2c_smbus_write_byte_data(client, regp->high, + data->temp11[index] >> 8); + if (err < 0) + return err; + if (data->flags & LM90_HAVE_REM_LIMIT_EXT) + err = i2c_smbus_write_byte_data(client, regp->low, + data->temp11[index] & 0xff); + + lm90_select_remote_channel(client, data, 0); + return err; +} + +static int lm90_get_temp8(struct lm90_data *data, int index) +{ + s8 temp8 = data->temp8[index]; + int temp; + + if (data->kind == adt7461 || data->kind == tmp451) + temp = temp_from_u8_adt7461(data, temp8); + else if (data->kind == max6646) + temp = temp_from_u8(temp8); + else + temp = temp_from_s8(temp8); + + /* +16 degrees offset for temp2 for the LM99 */ + if (data->kind == lm99 && index == 3) + temp += 16000; + + return temp; +} + +static int lm90_set_temp8(struct lm90_data *data, int index, long val) +{ + static const u8 reg[TEMP8_REG_NUM] = { + LM90_REG_W_LOCAL_LOW, + LM90_REG_W_LOCAL_HIGH, + LM90_REG_W_LOCAL_CRIT, + LM90_REG_W_REMOTE_CRIT, + MAX6659_REG_W_LOCAL_EMERG, + MAX6659_REG_W_REMOTE_EMERG, + LM90_REG_W_REMOTE_CRIT, + MAX6659_REG_W_REMOTE_EMERG, + }; + struct i2c_client *client = data->client; + int err; + + /* +16 degrees offset for temp2 for the LM99 */ + if (data->kind == lm99 && index == 3) + val -= 16000; + + if (data->kind == adt7461 || data->kind == tmp451) + data->temp8[index] = temp_to_u8_adt7461(data, val); + else if (data->kind == max6646) + data->temp8[index] = temp_to_u8(val); + else + data->temp8[index] = temp_to_s8(val); + + lm90_select_remote_channel(client, data, index >= 6); + err = i2c_smbus_write_byte_data(client, reg[index], data->temp8[index]); + lm90_select_remote_channel(client, data, 0); + + return err; +} + +static int lm90_get_temphyst(struct lm90_data *data, int index) +{ + int temp; + + if (data->kind == adt7461 || data->kind == tmp451) + temp = temp_from_u8_adt7461(data, data->temp8[index]); + else if (data->kind == max6646) + temp = temp_from_u8(data->temp8[index]); + else + temp = temp_from_s8(data->temp8[index]); + + /* +16 degrees offset for temp2 for the LM99 */ + if (data->kind == lm99 && index == 3) + temp += 16000; + + return temp - temp_from_s8(data->temp_hyst); +} + +static int lm90_set_temphyst(struct lm90_data *data, long val) +{ + struct i2c_client *client = data->client; + int temp; + int err; + + if (data->kind == adt7461 || data->kind == tmp451) + temp = temp_from_u8_adt7461(data, data->temp8[LOCAL_CRIT]); + else if (data->kind == max6646) + temp = temp_from_u8(data->temp8[LOCAL_CRIT]); + else + temp = temp_from_s8(data->temp8[LOCAL_CRIT]); + + data->temp_hyst = hyst_to_reg(temp - val); + err = i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST, + data->temp_hyst); + return err; +} + +static const u8 lm90_temp_index[3] = { + LOCAL_TEMP, REMOTE_TEMP, REMOTE2_TEMP +}; + +static const u8 lm90_temp_min_index[3] = { + LOCAL_LOW, REMOTE_LOW, REMOTE2_LOW +}; + +static const u8 lm90_temp_max_index[3] = { + LOCAL_HIGH, REMOTE_HIGH, REMOTE2_HIGH +}; + +static const u8 lm90_temp_crit_index[3] = { + LOCAL_CRIT, REMOTE_CRIT, REMOTE2_CRIT +}; + +static const u8 lm90_temp_emerg_index[3] = { + LOCAL_EMERG, REMOTE_EMERG, REMOTE2_EMERG +}; + +static const u8 lm90_min_alarm_bits[3] = { 5, 3, 11 }; +static const u8 lm90_max_alarm_bits[3] = { 0, 4, 12 }; +static const u8 lm90_crit_alarm_bits[3] = { 0, 1, 9 }; +static const u8 lm90_emergency_alarm_bits[3] = { 15, 13, 14 }; +static const u8 lm90_fault_bits[3] = { 0, 2, 10 }; + +static int lm90_temp_read(struct device *dev, u32 attr, int channel, long *val) +{ + struct lm90_data *data = dev_get_drvdata(dev); + int err; + + mutex_lock(&data->update_lock); + err = lm90_update_device(dev); + mutex_unlock(&data->update_lock); + if (err) + return err; + + switch (attr) { + case hwmon_temp_input: + *val = lm90_get_temp11(data, lm90_temp_index[channel]); + break; + case hwmon_temp_min_alarm: + *val = (data->alarms >> lm90_min_alarm_bits[channel]) & 1; + break; + case hwmon_temp_max_alarm: + *val = (data->alarms >> lm90_max_alarm_bits[channel]) & 1; + break; + case hwmon_temp_crit_alarm: + *val = (data->alarms >> lm90_crit_alarm_bits[channel]) & 1; + break; + case hwmon_temp_emergency_alarm: + *val = (data->alarms >> lm90_emergency_alarm_bits[channel]) & 1; + break; + case hwmon_temp_fault: + *val = (data->alarms >> lm90_fault_bits[channel]) & 1; + break; + case hwmon_temp_min: + if (channel == 0) + *val = lm90_get_temp8(data, + lm90_temp_min_index[channel]); + else + *val = lm90_get_temp11(data, + lm90_temp_min_index[channel]); + break; + case hwmon_temp_max: + if (channel == 0) + *val = lm90_get_temp8(data, + lm90_temp_max_index[channel]); + else + *val = lm90_get_temp11(data, + lm90_temp_max_index[channel]); + break; + case hwmon_temp_crit: + *val = lm90_get_temp8(data, lm90_temp_crit_index[channel]); + break; + case hwmon_temp_crit_hyst: + *val = lm90_get_temphyst(data, lm90_temp_crit_index[channel]); + break; + case hwmon_temp_emergency: + *val = lm90_get_temp8(data, lm90_temp_emerg_index[channel]); + break; + case hwmon_temp_emergency_hyst: + *val = lm90_get_temphyst(data, lm90_temp_emerg_index[channel]); + break; + case hwmon_temp_offset: + *val = lm90_get_temp11(data, REMOTE_OFFSET); + break; + default: + return -EOPNOTSUPP; + } + return 0; +} + +static int lm90_temp_write(struct device *dev, u32 attr, int channel, long val) +{ + struct lm90_data *data = dev_get_drvdata(dev); + int err; + + mutex_lock(&data->update_lock); + + err = lm90_update_device(dev); + if (err) + goto error; + + switch (attr) { + case hwmon_temp_min: + if (channel == 0) + err = lm90_set_temp8(data, + lm90_temp_min_index[channel], + val); + else + err = lm90_set_temp11(data, + lm90_temp_min_index[channel], + val); + break; + case hwmon_temp_max: + if (channel == 0) + err = lm90_set_temp8(data, + lm90_temp_max_index[channel], + val); + else + err = lm90_set_temp11(data, + lm90_temp_max_index[channel], + val); + break; + case hwmon_temp_crit: + err = lm90_set_temp8(data, lm90_temp_crit_index[channel], val); + break; + case hwmon_temp_crit_hyst: + err = lm90_set_temphyst(data, val); + break; + case hwmon_temp_emergency: + err = lm90_set_temp8(data, lm90_temp_emerg_index[channel], val); + break; + case hwmon_temp_offset: + err = lm90_set_temp11(data, REMOTE_OFFSET, val); + break; + default: + err = -EOPNOTSUPP; + break; + } +error: + mutex_unlock(&data->update_lock); + + return err; +} + +static umode_t lm90_temp_is_visible(const void *data, u32 attr, int channel) +{ + switch (attr) { + case hwmon_temp_input: + case hwmon_temp_min_alarm: + case hwmon_temp_max_alarm: + case hwmon_temp_crit_alarm: + case hwmon_temp_emergency_alarm: + case hwmon_temp_emergency_hyst: + case hwmon_temp_fault: + return S_IRUGO; + case hwmon_temp_min: + case hwmon_temp_max: + case hwmon_temp_crit: + case hwmon_temp_emergency: + case hwmon_temp_offset: + return S_IRUGO | S_IWUSR; + case hwmon_temp_crit_hyst: + if (channel == 0) + return S_IRUGO | S_IWUSR; + return S_IRUGO; + default: + return 0; + } +} + +static int lm90_chip_read(struct device *dev, u32 attr, int channel, long *val) +{ + struct lm90_data *data = dev_get_drvdata(dev); + int err; + + mutex_lock(&data->update_lock); + err = lm90_update_device(dev); + mutex_unlock(&data->update_lock); + if (err) + return err; + + switch (attr) { + case hwmon_chip_update_interval: + *val = data->update_interval; + break; + case hwmon_chip_alarms: + *val = data->alarms; + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int lm90_chip_write(struct device *dev, u32 attr, int channel, long val) +{ + struct lm90_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int err; + + mutex_lock(&data->update_lock); + + err = lm90_update_device(dev); + if (err) + goto error; + + switch (attr) { + case hwmon_chip_update_interval: + err = lm90_set_convrate(client, data, + clamp_val(val, 0, 100000)); + break; + default: + err = -EOPNOTSUPP; + break; + } +error: + mutex_unlock(&data->update_lock); + + return err; +} + +static umode_t lm90_chip_is_visible(const void *data, u32 attr, int channel) +{ + switch (attr) { + case hwmon_chip_update_interval: + return S_IRUGO | S_IWUSR; + case hwmon_chip_alarms: + return S_IRUGO; + default: + return 0; + } +} + +static int lm90_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + switch (type) { + case hwmon_chip: + return lm90_chip_read(dev, attr, channel, val); + case hwmon_temp: + return lm90_temp_read(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } +} + +static int lm90_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + switch (type) { + case hwmon_chip: + return lm90_chip_write(dev, attr, channel, val); + case hwmon_temp: + return lm90_temp_write(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } +} + +static umode_t lm90_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_chip: + return lm90_chip_is_visible(data, attr, channel); + case hwmon_temp: + return lm90_temp_is_visible(data, attr, channel); + default: + return 0; + } +} /* Return 0 if detection is successful, -ENODEV otherwise */ static int lm90_detect(struct i2c_client *client, @@ -1617,15 +1626,32 @@ static void lm90_regulator_disable(void *regulator) regulator_disable(regulator); } +static const u32 lm90_chip_config[] = { + HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL | HWMON_C_ALARMS, + 0 +}; + +static const struct hwmon_channel_info lm90_chip_info = { + .type = hwmon_chip, + .config = lm90_chip_config, +}; + + +static const struct hwmon_ops lm90_ops = { + .is_visible = lm90_is_visible, + .read = lm90_read, + .write = lm90_write, +}; + static int lm90_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device *dev = &client->dev; struct i2c_adapter *adapter = to_i2c_adapter(dev->parent); - struct lm90_data *data; + struct hwmon_channel_info *info; struct regulator *regulator; struct device *hwmon_dev; - int groups = 0; + struct lm90_data *data; int err; regulator = devm_regulator_get(dev, "vcc"); @@ -1665,6 +1691,49 @@ static int lm90_probe(struct i2c_client *client, /* Set chip capabilities */ data->flags = lm90_params[data->kind].flags; + + data->chip.ops = &lm90_ops; + data->chip.info = data->info; + + data->info[0] = &lm90_chip_info; + data->info[1] = &data->temp_info; + + info = &data->temp_info; + info->type = hwmon_temp; + info->config = data->channel_config; + + data->channel_config[0] = HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | + HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM | + HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM; + data->channel_config[1] = HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | + HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM | + HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT; + + if (data->flags & LM90_HAVE_OFFSET) + data->channel_config[1] |= HWMON_T_OFFSET; + + if (data->flags & LM90_HAVE_EMERGENCY) { + data->channel_config[0] |= HWMON_T_EMERGENCY | + HWMON_T_EMERGENCY_HYST; + data->channel_config[1] |= HWMON_T_EMERGENCY | + HWMON_T_EMERGENCY_HYST; + } + + if (data->flags & LM90_HAVE_EMERGENCY_ALARM) { + data->channel_config[0] |= HWMON_T_EMERGENCY_ALARM; + data->channel_config[1] |= HWMON_T_EMERGENCY_ALARM; + } + + if (data->flags & LM90_HAVE_TEMP3) { + data->channel_config[2] = HWMON_T_INPUT | + HWMON_T_MIN | HWMON_T_MAX | + HWMON_T_CRIT | HWMON_T_CRIT_HYST | + HWMON_T_EMERGENCY | HWMON_T_EMERGENCY_HYST | + HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | + HWMON_T_CRIT_ALARM | HWMON_T_EMERGENCY_ALARM | + HWMON_T_FAULT; + } + data->reg_local_ext = lm90_params[data->kind].reg_local_ext; /* Set maximum conversion rate */ @@ -1677,21 +1746,10 @@ static int lm90_probe(struct i2c_client *client, return err; } - /* Register sysfs hooks */ - data->groups[groups++] = &lm90_group; - - if (data->flags & LM90_HAVE_OFFSET) - data->groups[groups++] = &lm90_temp2_offset_group; - - if (data->flags & LM90_HAVE_EMERGENCY) - data->groups[groups++] = &lm90_emergency_group; - - if (data->flags & LM90_HAVE_EMERGENCY_ALARM) - data->groups[groups++] = &lm90_emergency_alarm_group; - - if (data->flags & LM90_HAVE_TEMP3) - data->groups[groups++] = &lm90_temp3_group; - + /* + * The 'pec' attribute is attached to the i2c device and thus created + * separately. + */ if (client->flags & I2C_CLIENT_PEC) { err = device_create_file(dev, &dev_attr_pec); if (err) @@ -1701,8 +1759,9 @@ static int lm90_probe(struct i2c_client *client, return err; } - hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, - data, data->groups); + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, + data, &data->chip, + NULL); if (IS_ERR(hwmon_dev)) return PTR_ERR(hwmon_dev); diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c index cdf19adaec79..8c573e6e9726 100644 --- a/drivers/hwmon/lm95241.c +++ b/drivers/hwmon/lm95241.c @@ -15,22 +15,17 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include -#include -#include -#include -#include -#include -#include +#include #include +#include +#include +#include +#include +#include #include -#include +#include #define DEVNAME "lm95241" @@ -54,26 +49,25 @@ static const unsigned short normal_i2c[] = { #define LM95241_REG_RW_REMOTE_MODEL 0x30 /* LM95241 specific bitfields */ -#define CFG_STOP 0x40 -#define CFG_CR0076 0x00 -#define CFG_CR0182 0x10 -#define CFG_CR1000 0x20 -#define CFG_CR2700 0x30 -#define R1MS_SHIFT 0 -#define R2MS_SHIFT 2 -#define R1MS_MASK (0x01 << (R1MS_SHIFT)) -#define R2MS_MASK (0x01 << (R2MS_SHIFT)) -#define R1DF_SHIFT 1 -#define R2DF_SHIFT 2 -#define R1DF_MASK (0x01 << (R1DF_SHIFT)) -#define R2DF_MASK (0x01 << (R2DF_SHIFT)) -#define R1FE_MASK 0x01 -#define R2FE_MASK 0x05 -#define TT1_SHIFT 0 -#define TT2_SHIFT 4 -#define TT_OFF 0 -#define TT_ON 1 -#define TT_MASK 7 +#define CFG_STOP BIT(6) +#define CFG_CR0076 0x00 +#define CFG_CR0182 BIT(4) +#define CFG_CR1000 BIT(5) +#define CFG_CR2700 (BIT(4) | BIT(5)) +#define CFG_CRMASK (BIT(4) | BIT(5)) +#define R1MS_MASK BIT(0) +#define R2MS_MASK BIT(2) +#define R1DF_MASK BIT(1) +#define R2DF_MASK BIT(2) +#define R1FE_MASK BIT(0) +#define R2FE_MASK BIT(2) +#define R1DM BIT(0) +#define R2DM BIT(1) +#define TT1_SHIFT 0 +#define TT2_SHIFT 4 +#define TT_OFF 0 +#define TT_ON 1 +#define TT_MASK 7 #define NATSEMI_MAN_ID 0x01 #define LM95231_CHIP_ID 0xA1 #define LM95241_CHIP_ID 0xA4 @@ -91,11 +85,12 @@ static const u8 lm95241_reg_address[] = { struct lm95241_data { struct i2c_client *client; struct mutex update_lock; - unsigned long last_updated, interval; /* in jiffies */ + unsigned long last_updated; /* in jiffies */ + unsigned long interval; /* in milli-seconds */ char valid; /* zero until following fields are valid */ /* registers values */ u8 temp[ARRAY_SIZE(lm95241_reg_address)]; - u8 config, model, trutherm; + u8 status, config, model, trutherm; }; /* Conversions */ @@ -118,7 +113,8 @@ static struct lm95241_data *lm95241_update_device(struct device *dev) mutex_lock(&data->update_lock); - if (time_after(jiffies, data->last_updated + data->interval) || + if (time_after(jiffies, data->last_updated + + msecs_to_jiffies(data->interval)) || !data->valid) { int i; @@ -127,6 +123,9 @@ static struct lm95241_data *lm95241_update_device(struct device *dev) data->temp[i] = i2c_smbus_read_byte_data(client, lm95241_reg_address[i]); + + data->status = i2c_smbus_read_byte_data(client, + LM95241_REG_R_STATUS); data->last_updated = jiffies; data->valid = 1; } @@ -136,197 +135,241 @@ static struct lm95241_data *lm95241_update_device(struct device *dev) return data; } -/* Sysfs stuff */ -static ssize_t show_input(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct lm95241_data *data = lm95241_update_device(dev); - int index = to_sensor_dev_attr(attr)->index; - - return snprintf(buf, PAGE_SIZE - 1, "%d\n", - index == 0 || (data->config & (1 << (index / 2))) ? - temp_from_reg_signed(data->temp[index], data->temp[index + 1]) : - temp_from_reg_unsigned(data->temp[index], - data->temp[index + 1])); -} - -static ssize_t show_type(struct device *dev, struct device_attribute *attr, - char *buf) +static int lm95241_read_chip(struct device *dev, u32 attr, int channel, + long *val) { struct lm95241_data *data = dev_get_drvdata(dev); - return snprintf(buf, PAGE_SIZE - 1, - data->model & to_sensor_dev_attr(attr)->index ? "1\n" : "2\n"); + switch (attr) { + case hwmon_chip_update_interval: + *val = data->interval; + return 0; + default: + return -EOPNOTSUPP; + } } -static ssize_t set_type(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static int lm95241_read_temp(struct device *dev, u32 attr, int channel, + long *val) +{ + struct lm95241_data *data = lm95241_update_device(dev); + + switch (attr) { + case hwmon_temp_input: + if (!channel || (data->config & BIT(channel - 1))) + *val = temp_from_reg_signed(data->temp[channel * 2], + data->temp[channel * 2 + 1]); + else + *val = temp_from_reg_unsigned(data->temp[channel * 2], + data->temp[channel * 2 + 1]); + return 0; + case hwmon_temp_min: + if (channel == 1) + *val = (data->config & R1DF_MASK) ? -128000 : 0; + else + *val = (data->config & R2DF_MASK) ? -128000 : 0; + return 0; + case hwmon_temp_max: + if (channel == 1) + *val = (data->config & R1DF_MASK) ? 127875 : 255875; + else + *val = (data->config & R2DF_MASK) ? 127875 : 255875; + return 0; + case hwmon_temp_type: + if (channel == 1) + *val = (data->model & R1MS_MASK) ? 1 : 2; + else + *val = (data->model & R2MS_MASK) ? 1 : 2; + return 0; + case hwmon_temp_fault: + if (channel == 1) + *val = !!(data->status & R1DM); + else + *val = !!(data->status & R2DM); + return 0; + default: + return -EOPNOTSUPP; + } +} + +static int lm95241_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + switch (type) { + case hwmon_chip: + return lm95241_read_chip(dev, attr, channel, val); + case hwmon_temp: + return lm95241_read_temp(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } +} + +static int lm95241_write_chip(struct device *dev, u32 attr, int channel, + long val) +{ + struct lm95241_data *data = dev_get_drvdata(dev); + int convrate; + u8 config; + int ret; + + mutex_lock(&data->update_lock); + + switch (attr) { + case hwmon_chip_update_interval: + config = data->config & ~CFG_CRMASK; + if (val < 130) { + convrate = 76; + config |= CFG_CR0076; + } else if (val < 590) { + convrate = 182; + config |= CFG_CR0182; + } else if (val < 1850) { + convrate = 1000; + config |= CFG_CR1000; + } else { + convrate = 2700; + config |= CFG_CR2700; + } + data->interval = convrate; + data->config = config; + ret = i2c_smbus_write_byte_data(data->client, + LM95241_REG_RW_CONFIG, config); + break; + default: + ret = -EOPNOTSUPP; + break; + } + mutex_unlock(&data->update_lock); + return ret; +} + +static int lm95241_write_temp(struct device *dev, u32 attr, int channel, + long val) { struct lm95241_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; - unsigned long val; - int shift; - u8 mask = to_sensor_dev_attr(attr)->index; - - if (kstrtoul(buf, 10, &val) < 0) - return -EINVAL; - if (val != 1 && val != 2) - return -EINVAL; - - shift = mask == R1MS_MASK ? TT1_SHIFT : TT2_SHIFT; + int ret; mutex_lock(&data->update_lock); - data->trutherm &= ~(TT_MASK << shift); - if (val == 1) { - data->model |= mask; - data->trutherm |= (TT_ON << shift); - } else { - data->model &= ~mask; - data->trutherm |= (TT_OFF << shift); + switch (attr) { + case hwmon_temp_min: + if (channel == 1) { + if (val < 0) + data->config |= R1DF_MASK; + else + data->config &= ~R1DF_MASK; + } else { + if (val < 0) + data->config |= R2DF_MASK; + else + data->config &= ~R2DF_MASK; + } + data->valid = 0; + ret = i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, + data->config); + break; + case hwmon_temp_max: + if (channel == 1) { + if (val <= 127875) + data->config |= R1DF_MASK; + else + data->config &= ~R1DF_MASK; + } else { + if (val <= 127875) + data->config |= R2DF_MASK; + else + data->config &= ~R2DF_MASK; + } + data->valid = 0; + ret = i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, + data->config); + break; + case hwmon_temp_type: + if (val != 1 && val != 2) { + ret = -EINVAL; + break; + } + if (channel == 1) { + data->trutherm &= ~(TT_MASK << TT1_SHIFT); + if (val == 1) { + data->model |= R1MS_MASK; + data->trutherm |= (TT_ON << TT1_SHIFT); + } else { + data->model &= ~R1MS_MASK; + data->trutherm |= (TT_OFF << TT1_SHIFT); + } + } else { + data->trutherm &= ~(TT_MASK << TT2_SHIFT); + if (val == 1) { + data->model |= R2MS_MASK; + data->trutherm |= (TT_ON << TT2_SHIFT); + } else { + data->model &= ~R2MS_MASK; + data->trutherm |= (TT_OFF << TT2_SHIFT); + } + } + ret = i2c_smbus_write_byte_data(client, + LM95241_REG_RW_REMOTE_MODEL, + data->model); + if (ret < 0) + break; + ret = i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM, + data->trutherm); + break; + default: + ret = -EOPNOTSUPP; + break; } - data->valid = 0; - - i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL, - data->model); - i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM, - data->trutherm); mutex_unlock(&data->update_lock); - return count; + return ret; } -static ssize_t show_min(struct device *dev, struct device_attribute *attr, - char *buf) +static int lm95241_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) { - struct lm95241_data *data = dev_get_drvdata(dev); - - return snprintf(buf, PAGE_SIZE - 1, - data->config & to_sensor_dev_attr(attr)->index ? - "-127000\n" : "0\n"); + switch (type) { + case hwmon_chip: + return lm95241_write_chip(dev, attr, channel, val); + case hwmon_temp: + return lm95241_write_temp(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } } -static ssize_t set_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static umode_t lm95241_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) { - struct lm95241_data *data = dev_get_drvdata(dev); - long val; - - if (kstrtol(buf, 10, &val) < 0) - return -EINVAL; - if (val < -128000) - return -EINVAL; - - mutex_lock(&data->update_lock); - - if (val < 0) - data->config |= to_sensor_dev_attr(attr)->index; - else - data->config &= ~to_sensor_dev_attr(attr)->index; - data->valid = 0; - - i2c_smbus_write_byte_data(data->client, LM95241_REG_RW_CONFIG, - data->config); - - mutex_unlock(&data->update_lock); - - return count; + switch (type) { + case hwmon_chip: + switch (attr) { + case hwmon_chip_update_interval: + return S_IRUGO | S_IWUSR; + } + break; + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + return S_IRUGO; + case hwmon_temp_fault: + return S_IRUGO; + case hwmon_temp_min: + case hwmon_temp_max: + case hwmon_temp_type: + return S_IRUGO | S_IWUSR; + } + break; + default: + break; + } + return 0; } -static ssize_t show_max(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct lm95241_data *data = dev_get_drvdata(dev); - - return snprintf(buf, PAGE_SIZE - 1, - data->config & to_sensor_dev_attr(attr)->index ? - "127000\n" : "255000\n"); -} - -static ssize_t set_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct lm95241_data *data = dev_get_drvdata(dev); - long val; - - if (kstrtol(buf, 10, &val) < 0) - return -EINVAL; - if (val >= 256000) - return -EINVAL; - - mutex_lock(&data->update_lock); - - if (val <= 127000) - data->config |= to_sensor_dev_attr(attr)->index; - else - data->config &= ~to_sensor_dev_attr(attr)->index; - data->valid = 0; - - i2c_smbus_write_byte_data(data->client, LM95241_REG_RW_CONFIG, - data->config); - - mutex_unlock(&data->update_lock); - - return count; -} - -static ssize_t show_interval(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct lm95241_data *data = lm95241_update_device(dev); - - return snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->interval - / HZ); -} - -static ssize_t set_interval(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct lm95241_data *data = dev_get_drvdata(dev); - unsigned long val; - - if (kstrtoul(buf, 10, &val) < 0) - return -EINVAL; - - data->interval = val * HZ / 1000; - - return count; -} - -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0); -static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2); -static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_input, NULL, 4); -static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, set_type, - R1MS_MASK); -static SENSOR_DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type, set_type, - R2MS_MASK); -static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min, set_min, - R1DF_MASK); -static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min, set_min, - R2DF_MASK); -static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max, set_max, - R1DF_MASK); -static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max, set_max, - R2DF_MASK); -static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval, - set_interval); - -static struct attribute *lm95241_attrs[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp2_input.dev_attr.attr, - &sensor_dev_attr_temp3_input.dev_attr.attr, - &sensor_dev_attr_temp2_type.dev_attr.attr, - &sensor_dev_attr_temp3_type.dev_attr.attr, - &sensor_dev_attr_temp2_min.dev_attr.attr, - &sensor_dev_attr_temp3_min.dev_attr.attr, - &sensor_dev_attr_temp2_max.dev_attr.attr, - &sensor_dev_attr_temp3_max.dev_attr.attr, - &dev_attr_update_interval.attr, - NULL -}; -ATTRIBUTE_GROUPS(lm95241); - /* Return 0 if detection is successful, -ENODEV otherwise */ static int lm95241_detect(struct i2c_client *new_client, struct i2c_board_info *info) @@ -362,8 +405,8 @@ static int lm95241_detect(struct i2c_client *new_client, static void lm95241_init_client(struct i2c_client *client, struct lm95241_data *data) { - data->interval = HZ; /* 1 sec default */ - data->config = CFG_CR0076; + data->interval = 1000; + data->config = CFG_CR1000; data->trutherm = (TT_OFF << TT1_SHIFT) | (TT_OFF << TT2_SHIFT); i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config); @@ -375,6 +418,47 @@ static void lm95241_init_client(struct i2c_client *client, data->model); } +static const u32 lm95241_chip_config[] = { + HWMON_C_UPDATE_INTERVAL, + 0 +}; + +static const struct hwmon_channel_info lm95241_chip = { + .type = hwmon_chip, + .config = lm95241_chip_config, +}; + +static const u32 lm95241_temp_config[] = { + HWMON_T_INPUT, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | HWMON_T_TYPE | + HWMON_T_FAULT, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | HWMON_T_TYPE | + HWMON_T_FAULT, + 0 +}; + +static const struct hwmon_channel_info lm95241_temp = { + .type = hwmon_temp, + .config = lm95241_temp_config, +}; + +static const struct hwmon_channel_info *lm95241_info[] = { + &lm95241_chip, + &lm95241_temp, + NULL +}; + +static const struct hwmon_ops lm95241_hwmon_ops = { + .is_visible = lm95241_is_visible, + .read = lm95241_read, + .write = lm95241_write, +}; + +static const struct hwmon_chip_info lm95241_chip_info = { + .ops = &lm95241_hwmon_ops, + .info = lm95241_info, +}; + static int lm95241_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -392,9 +476,10 @@ static int lm95241_probe(struct i2c_client *client, /* Initialize the LM95241 chip */ lm95241_init_client(client, data); - hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data, - lm95241_groups); + &lm95241_chip_info, + NULL); return PTR_ERR_OR_ZERO(hwmon_dev); } @@ -420,5 +505,5 @@ static struct i2c_driver lm95241_driver = { module_i2c_driver(lm95241_driver); MODULE_AUTHOR("Davide Rizzo "); -MODULE_DESCRIPTION("LM95241 sensor driver"); +MODULE_DESCRIPTION("LM95231/LM95241 sensor driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/lm95245.c b/drivers/hwmon/lm95245.c index e7aef4561c83..a3bfd88752ca 100644 --- a/drivers/hwmon/lm95245.c +++ b/drivers/hwmon/lm95245.c @@ -15,22 +15,16 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include -#include -#include -#include -#include -#include -#include #include +#include +#include +#include +#include #include -#include +#include +#include static const unsigned short normal_i2c[] = { 0x18, 0x19, 0x29, 0x4c, 0x4d, I2C_CLIENT_END }; @@ -89,6 +83,7 @@ static const unsigned short normal_i2c[] = { #define RATE_CR1000 0x02 #define RATE_CR2500 0x03 +#define STATUS1_ROS 0x10 #define STATUS1_DIODE_FAULT 0x04 #define STATUS1_RTCRIT 0x02 #define STATUS1_LOC 0x01 @@ -112,14 +107,9 @@ static const u8 lm95245_reg_address[] = { /* Client data (each client gets its own) */ struct lm95245_data { - struct i2c_client *client; + struct regmap *regmap; struct mutex update_lock; - unsigned long last_updated; /* in jiffies */ - unsigned long interval; /* in msecs */ - bool valid; /* zero until following fields are valid */ - /* registers values */ - u8 regs[ARRAY_SIZE(lm95245_reg_address)]; - u8 config1, config2; + int interval; /* in msecs */ }; /* Conversions */ @@ -135,60 +125,36 @@ static int temp_from_reg_signed(u8 val_h, u8 val_l) return temp_from_reg_unsigned(val_h, val_l); } -static struct lm95245_data *lm95245_update_device(struct device *dev) +static int lm95245_read_conversion_rate(struct lm95245_data *data) { - struct lm95245_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; + unsigned int rate; + int ret; - mutex_lock(&data->update_lock); - - if (time_after(jiffies, data->last_updated - + msecs_to_jiffies(data->interval)) || !data->valid) { - int i; - - for (i = 0; i < ARRAY_SIZE(lm95245_reg_address); i++) - data->regs[i] - = i2c_smbus_read_byte_data(client, - lm95245_reg_address[i]); - data->last_updated = jiffies; - data->valid = 1; - } - - mutex_unlock(&data->update_lock); - - return data; -} - -static unsigned long lm95245_read_conversion_rate(struct i2c_client *client) -{ - int rate; - unsigned long interval; - - rate = i2c_smbus_read_byte_data(client, LM95245_REG_RW_CONVERS_RATE); + ret = regmap_read(data->regmap, LM95245_REG_RW_CONVERS_RATE, &rate); + if (ret < 0) + return ret; switch (rate) { case RATE_CR0063: - interval = 63; + data->interval = 63; break; case RATE_CR0364: - interval = 364; + data->interval = 364; break; case RATE_CR1000: - interval = 1000; + data->interval = 1000; break; case RATE_CR2500: default: - interval = 2500; + data->interval = 2500; break; } - - return interval; + return 0; } -static unsigned long lm95245_set_conversion_rate(struct i2c_client *client, - unsigned long interval) +static int lm95245_set_conversion_rate(struct lm95245_data *data, long interval) { - int rate; + int ret, rate; if (interval <= 63) { interval = 63; @@ -204,220 +170,288 @@ static unsigned long lm95245_set_conversion_rate(struct i2c_client *client, rate = RATE_CR2500; } - i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONVERS_RATE, rate); + ret = regmap_write(data->regmap, LM95245_REG_RW_CONVERS_RATE, rate); + if (ret < 0) + return ret; - return interval; + data->interval = interval; + return 0; } -/* Sysfs stuff */ -static ssize_t show_input(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct lm95245_data *data = lm95245_update_device(dev); - int temp; - int index = to_sensor_dev_attr(attr)->index; - - /* - * Index 0 (Local temp) is always signed - * Index 2 (Remote temp) has both signed and unsigned data - * use signed calculation for remote if signed bit is set - */ - if (index == 0 || data->regs[index] & 0x80) - temp = temp_from_reg_signed(data->regs[index], - data->regs[index + 1]); - else - temp = temp_from_reg_unsigned(data->regs[index + 2], - data->regs[index + 3]); - - return snprintf(buf, PAGE_SIZE - 1, "%d\n", temp); -} - -static ssize_t show_limit(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct lm95245_data *data = lm95245_update_device(dev); - int index = to_sensor_dev_attr(attr)->index; - - return snprintf(buf, PAGE_SIZE - 1, "%d\n", - data->regs[index] * 1000); -} - -static ssize_t set_limit(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static int lm95245_read_temp(struct device *dev, u32 attr, int channel, + long *val) { struct lm95245_data *data = dev_get_drvdata(dev); - int index = to_sensor_dev_attr(attr)->index; - struct i2c_client *client = data->client; - unsigned long val; + struct regmap *regmap = data->regmap; + int ret, regl, regh, regvall, regvalh; - if (kstrtoul(buf, 10, &val) < 0) - return -EINVAL; - - val /= 1000; - - val = clamp_val(val, 0, (index == 6 ? 127 : 255)); - - mutex_lock(&data->update_lock); - - data->valid = 0; - - i2c_smbus_write_byte_data(client, lm95245_reg_address[index], val); - - mutex_unlock(&data->update_lock); - - return count; + switch (attr) { + case hwmon_temp_input: + regl = channel ? LM95245_REG_R_REMOTE_TEMPL_S : + LM95245_REG_R_LOCAL_TEMPL_S; + regh = channel ? LM95245_REG_R_REMOTE_TEMPH_S : + LM95245_REG_R_LOCAL_TEMPH_S; + ret = regmap_read(regmap, regl, ®vall); + if (ret < 0) + return ret; + ret = regmap_read(regmap, regh, ®valh); + if (ret < 0) + return ret; + /* + * Local temp is always signed. + * Remote temp has both signed and unsigned data. + * Use signed calculation for remote if signed bit is set + * or if reported temperature is below signed limit. + */ + if (!channel || (regvalh & 0x80) || regvalh < 0x7f) { + *val = temp_from_reg_signed(regvalh, regvall); + return 0; + } + ret = regmap_read(regmap, LM95245_REG_R_REMOTE_TEMPL_U, + ®vall); + if (ret < 0) + return ret; + ret = regmap_read(regmap, LM95245_REG_R_REMOTE_TEMPH_U, + ®valh); + if (ret < 0) + return ret; + *val = temp_from_reg_unsigned(regvalh, regvall); + return 0; + case hwmon_temp_max: + ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OS_LIMIT, + ®valh); + if (ret < 0) + return ret; + *val = regvalh * 1000; + return 0; + case hwmon_temp_crit: + regh = channel ? LM95245_REG_RW_REMOTE_TCRIT_LIMIT : + LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT; + ret = regmap_read(regmap, regh, ®valh); + if (ret < 0) + return ret; + *val = regvalh * 1000; + return 0; + case hwmon_temp_max_hyst: + ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OS_LIMIT, + ®valh); + if (ret < 0) + return ret; + ret = regmap_read(regmap, LM95245_REG_RW_COMMON_HYSTERESIS, + ®vall); + if (ret < 0) + return ret; + *val = (regvalh - regvall) * 1000; + return 0; + case hwmon_temp_crit_hyst: + regh = channel ? LM95245_REG_RW_REMOTE_TCRIT_LIMIT : + LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT; + ret = regmap_read(regmap, regh, ®valh); + if (ret < 0) + return ret; + ret = regmap_read(regmap, LM95245_REG_RW_COMMON_HYSTERESIS, + ®vall); + if (ret < 0) + return ret; + *val = (regvalh - regvall) * 1000; + return 0; + case hwmon_temp_type: + ret = regmap_read(regmap, LM95245_REG_RW_CONFIG2, ®valh); + if (ret < 0) + return ret; + *val = (regvalh & CFG2_REMOTE_TT) ? 1 : 2; + return 0; + case hwmon_temp_offset: + ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OFFL, + ®vall); + if (ret < 0) + return ret; + ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OFFH, + ®valh); + if (ret < 0) + return ret; + *val = temp_from_reg_signed(regvalh, regvall); + return 0; + case hwmon_temp_max_alarm: + ret = regmap_read(regmap, LM95245_REG_R_STATUS1, ®valh); + if (ret < 0) + return ret; + *val = !!(regvalh & STATUS1_ROS); + return 0; + case hwmon_temp_crit_alarm: + ret = regmap_read(regmap, LM95245_REG_R_STATUS1, ®valh); + if (ret < 0) + return ret; + *val = !!(regvalh & (channel ? STATUS1_RTCRIT : STATUS1_LOC)); + return 0; + case hwmon_temp_fault: + ret = regmap_read(regmap, LM95245_REG_R_STATUS1, ®valh); + if (ret < 0) + return ret; + *val = !!(regvalh & STATUS1_DIODE_FAULT); + return 0; + default: + return -EOPNOTSUPP; + } } -static ssize_t show_crit_hyst(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct lm95245_data *data = lm95245_update_device(dev); - int index = to_sensor_dev_attr(attr)->index; - int hyst = data->regs[index] - data->regs[8]; - - return snprintf(buf, PAGE_SIZE - 1, "%d\n", hyst * 1000); -} - -static ssize_t set_crit_hyst(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static int lm95245_write_temp(struct device *dev, u32 attr, int channel, + long val) { struct lm95245_data *data = dev_get_drvdata(dev); - int index = to_sensor_dev_attr(attr)->index; - struct i2c_client *client = data->client; - unsigned long val; - int hyst, limit; + struct regmap *regmap = data->regmap; + unsigned int regval; + int ret, reg; - if (kstrtoul(buf, 10, &val) < 0) - return -EINVAL; - - mutex_lock(&data->update_lock); - - limit = i2c_smbus_read_byte_data(client, lm95245_reg_address[index]); - hyst = limit - val / 1000; - hyst = clamp_val(hyst, 0, 31); - data->regs[8] = hyst; - - /* shared crit hysteresis */ - i2c_smbus_write_byte_data(client, LM95245_REG_RW_COMMON_HYSTERESIS, - hyst); - - mutex_unlock(&data->update_lock); - - return count; + switch (attr) { + case hwmon_temp_max: + val = clamp_val(val / 1000, 0, 255); + ret = regmap_write(regmap, LM95245_REG_RW_REMOTE_OS_LIMIT, val); + return ret; + case hwmon_temp_crit: + reg = channel ? LM95245_REG_RW_REMOTE_TCRIT_LIMIT : + LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT; + val = clamp_val(val / 1000, 0, channel ? 255 : 127); + ret = regmap_write(regmap, reg, val); + return ret; + case hwmon_temp_crit_hyst: + mutex_lock(&data->update_lock); + ret = regmap_read(regmap, LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT, + ®val); + if (ret < 0) { + mutex_unlock(&data->update_lock); + return ret; + } + /* Clamp to reasonable range to prevent overflow */ + val = clamp_val(val, -1000000, 1000000); + val = regval - val / 1000; + val = clamp_val(val, 0, 31); + ret = regmap_write(regmap, LM95245_REG_RW_COMMON_HYSTERESIS, + val); + mutex_unlock(&data->update_lock); + return ret; + case hwmon_temp_offset: + val = clamp_val(val, -128000, 127875); + val = val * 256 / 1000; + mutex_lock(&data->update_lock); + ret = regmap_write(regmap, LM95245_REG_RW_REMOTE_OFFL, + val & 0xe0); + if (ret < 0) { + mutex_unlock(&data->update_lock); + return ret; + } + ret = regmap_write(regmap, LM95245_REG_RW_REMOTE_OFFH, + (val >> 8) & 0xff); + mutex_unlock(&data->update_lock); + return ret; + case hwmon_temp_type: + if (val != 1 && val != 2) + return -EINVAL; + ret = regmap_update_bits(regmap, LM95245_REG_RW_CONFIG2, + CFG2_REMOTE_TT, + val == 1 ? CFG2_REMOTE_TT : 0); + return ret; + default: + return -EOPNOTSUPP; + } } -static ssize_t show_type(struct device *dev, struct device_attribute *attr, - char *buf) +static int lm95245_read_chip(struct device *dev, u32 attr, int channel, + long *val) { struct lm95245_data *data = dev_get_drvdata(dev); - return snprintf(buf, PAGE_SIZE - 1, - data->config2 & CFG2_REMOTE_TT ? "1\n" : "2\n"); + switch (attr) { + case hwmon_chip_update_interval: + *val = data->interval; + return 0; + default: + return -EOPNOTSUPP; + } } -static ssize_t set_type(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static int lm95245_write_chip(struct device *dev, u32 attr, int channel, + long val) { struct lm95245_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - unsigned long val; + int ret; - if (kstrtoul(buf, 10, &val) < 0) - return -EINVAL; - if (val != 1 && val != 2) - return -EINVAL; - - mutex_lock(&data->update_lock); - - if (val == 1) - data->config2 |= CFG2_REMOTE_TT; - else - data->config2 &= ~CFG2_REMOTE_TT; - - data->valid = 0; - - i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONFIG2, - data->config2); - - mutex_unlock(&data->update_lock); - - return count; + switch (attr) { + case hwmon_chip_update_interval: + mutex_lock(&data->update_lock); + ret = lm95245_set_conversion_rate(data, val); + mutex_unlock(&data->update_lock); + return ret; + default: + return -EOPNOTSUPP; + } } -static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, - char *buf) +static int lm95245_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) { - struct lm95245_data *data = lm95245_update_device(dev); - int index = to_sensor_dev_attr(attr)->index; - - return snprintf(buf, PAGE_SIZE - 1, "%d\n", - !!(data->regs[9] & index)); + switch (type) { + case hwmon_chip: + return lm95245_read_chip(dev, attr, channel, val); + case hwmon_temp: + return lm95245_read_temp(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } } -static ssize_t show_interval(struct device *dev, struct device_attribute *attr, - char *buf) +static int lm95245_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) { - struct lm95245_data *data = lm95245_update_device(dev); - - return snprintf(buf, PAGE_SIZE - 1, "%lu\n", data->interval); + switch (type) { + case hwmon_chip: + return lm95245_write_chip(dev, attr, channel, val); + case hwmon_temp: + return lm95245_write_temp(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } } -static ssize_t set_interval(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static umode_t lm95245_temp_is_visible(const void *data, u32 attr, int channel) { - struct lm95245_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - unsigned long val; - - if (kstrtoul(buf, 10, &val) < 0) - return -EINVAL; - - mutex_lock(&data->update_lock); - - data->interval = lm95245_set_conversion_rate(client, val); - - mutex_unlock(&data->update_lock); - - return count; + switch (attr) { + case hwmon_temp_input: + case hwmon_temp_max_alarm: + case hwmon_temp_max_hyst: + case hwmon_temp_crit_alarm: + case hwmon_temp_fault: + return S_IRUGO; + case hwmon_temp_type: + case hwmon_temp_max: + case hwmon_temp_crit: + case hwmon_temp_offset: + return S_IRUGO | S_IWUSR; + case hwmon_temp_crit_hyst: + return (channel == 0) ? S_IRUGO | S_IWUSR : S_IRUGO; + default: + return 0; + } } -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0); -static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_limit, - set_limit, 6); -static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_crit_hyst, - set_crit_hyst, 6); -static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, - STATUS1_LOC); - -static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2); -static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_limit, - set_limit, 7); -static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_crit_hyst, NULL, 7); -static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, - STATUS1_RTCRIT); -static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, - set_type, 0); -static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, - STATUS1_DIODE_FAULT); - -static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval, - set_interval); - -static struct attribute *lm95245_attrs[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp1_crit.dev_attr.attr, - &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, - &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_input.dev_attr.attr, - &sensor_dev_attr_temp2_crit.dev_attr.attr, - &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, - &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_type.dev_attr.attr, - &sensor_dev_attr_temp2_fault.dev_attr.attr, - &dev_attr_update_interval.attr, - NULL -}; -ATTRIBUTE_GROUPS(lm95245); +static umode_t lm95245_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_chip: + switch (attr) { + case hwmon_chip_update_interval: + return S_IRUGO | S_IWUSR; + default: + return 0; + } + case hwmon_temp: + return lm95245_temp_is_visible(data, attr, channel); + default: + return 0; + } +} /* Return 0 if detection is successful, -ENODEV otherwise */ static int lm95245_detect(struct i2c_client *new_client, @@ -453,44 +487,130 @@ static int lm95245_detect(struct i2c_client *new_client, return 0; } -static void lm95245_init_client(struct i2c_client *client, - struct lm95245_data *data) +static int lm95245_init_client(struct lm95245_data *data) { - data->interval = lm95245_read_conversion_rate(client); + int ret; - data->config1 = i2c_smbus_read_byte_data(client, - LM95245_REG_RW_CONFIG1); - data->config2 = i2c_smbus_read_byte_data(client, - LM95245_REG_RW_CONFIG2); + ret = lm95245_read_conversion_rate(data); + if (ret < 0) + return ret; - if (data->config1 & CFG_STOP) { - /* Clear the standby bit */ - data->config1 &= ~CFG_STOP; - i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONFIG1, - data->config1); + return regmap_update_bits(data->regmap, LM95245_REG_RW_CONFIG1, + CFG_STOP, 0); +} + +static bool lm95245_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LM95245_REG_RW_CONFIG1: + case LM95245_REG_RW_CONVERS_RATE: + case LM95245_REG_W_ONE_SHOT: + case LM95245_REG_RW_CONFIG2: + case LM95245_REG_RW_REMOTE_OFFH: + case LM95245_REG_RW_REMOTE_OFFL: + case LM95245_REG_RW_REMOTE_OS_LIMIT: + case LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT: + case LM95245_REG_RW_REMOTE_TCRIT_LIMIT: + case LM95245_REG_RW_COMMON_HYSTERESIS: + return true; + default: + return false; } } +static bool lm95245_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LM95245_REG_R_STATUS1: + case LM95245_REG_R_STATUS2: + case LM95245_REG_R_LOCAL_TEMPH_S: + case LM95245_REG_R_LOCAL_TEMPL_S: + case LM95245_REG_R_REMOTE_TEMPH_S: + case LM95245_REG_R_REMOTE_TEMPL_S: + case LM95245_REG_R_REMOTE_TEMPH_U: + case LM95245_REG_R_REMOTE_TEMPL_U: + return true; + default: + return false; + } +} + +static const struct regmap_config lm95245_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .writeable_reg = lm95245_is_writeable_reg, + .volatile_reg = lm95245_is_volatile_reg, + .cache_type = REGCACHE_RBTREE, + .use_single_rw = true, +}; + +static const u32 lm95245_chip_config[] = { + HWMON_C_UPDATE_INTERVAL, + 0 +}; + +static const struct hwmon_channel_info lm95245_chip = { + .type = hwmon_chip, + .config = lm95245_chip_config, +}; + +static const u32 lm95245_temp_config[] = { + HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_CRIT_ALARM, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | HWMON_T_CRIT | + HWMON_T_CRIT_HYST | HWMON_T_FAULT | HWMON_T_MAX_ALARM | + HWMON_T_CRIT_ALARM | HWMON_T_TYPE | HWMON_T_OFFSET, + 0 +}; + +static const struct hwmon_channel_info lm95245_temp = { + .type = hwmon_temp, + .config = lm95245_temp_config, +}; + +static const struct hwmon_channel_info *lm95245_info[] = { + &lm95245_chip, + &lm95245_temp, + NULL +}; + +static const struct hwmon_ops lm95245_hwmon_ops = { + .is_visible = lm95245_is_visible, + .read = lm95245_read, + .write = lm95245_write, +}; + +static const struct hwmon_chip_info lm95245_chip_info = { + .ops = &lm95245_hwmon_ops, + .info = lm95245_info, +}; + static int lm95245_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device *dev = &client->dev; struct lm95245_data *data; struct device *hwmon_dev; + int ret; data = devm_kzalloc(dev, sizeof(struct lm95245_data), GFP_KERNEL); if (!data) return -ENOMEM; - data->client = client; + data->regmap = devm_regmap_init_i2c(client, &lm95245_regmap_config); + if (IS_ERR(data->regmap)) + return PTR_ERR(data->regmap); + mutex_init(&data->update_lock); /* Initialize the LM95245 chip */ - lm95245_init_client(client, data); + ret = lm95245_init_client(data); + if (ret < 0) + return ret; - hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, - data, - lm95245_groups); + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, + data, + &lm95245_chip_info, + NULL); return PTR_ERR_OR_ZERO(hwmon_dev); } diff --git a/drivers/hwmon/ltc4151.c b/drivers/hwmon/ltc4151.c index c86a18402496..8445c9fd946b 100644 --- a/drivers/hwmon/ltc4151.c +++ b/drivers/hwmon/ltc4151.c @@ -30,6 +30,7 @@ #include #include +#include #include #include #include @@ -52,6 +53,7 @@ struct ltc4151_data { struct mutex update_lock; bool valid; unsigned long last_updated; /* in jiffies */ + unsigned int shunt; /* in micro ohms */ /* Registers */ u8 regs[6]; @@ -111,9 +113,9 @@ static int ltc4151_get_value(struct ltc4151_data *data, u8 reg) case LTC4151_SENSE_H: /* * 20uV resolution. Convert to current as measured with - * an 1 mOhm sense resistor, in mA. + * a given sense resistor, in mA. */ - val = val * 20; + val = val * 20 * 1000 / data->shunt; break; case LTC4151_VIN_H: /* 25 mV per increment */ @@ -176,6 +178,7 @@ static int ltc4151_probe(struct i2c_client *client, struct device *dev = &client->dev; struct ltc4151_data *data; struct device *hwmon_dev; + u32 shunt; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; @@ -184,6 +187,15 @@ static int ltc4151_probe(struct i2c_client *client, if (!data) return -ENOMEM; + if (of_property_read_u32(client->dev.of_node, + "shunt-resistor-micro-ohms", &shunt)) + shunt = 1000; /* 1 mOhm if not set via DT */ + + if (shunt == 0) + return -EINVAL; + + data->shunt = shunt; + data->client = client; mutex_init(&data->update_lock); @@ -199,10 +211,16 @@ static const struct i2c_device_id ltc4151_id[] = { }; MODULE_DEVICE_TABLE(i2c, ltc4151_id); +static const struct of_device_id ltc4151_match[] = { + { .compatible = "lltc,ltc4151" }, + {}, +}; + /* This is the driver that will be inserted */ static struct i2c_driver ltc4151_driver = { .driver = { .name = "ltc4151", + .of_match_table = of_match_ptr(ltc4151_match), }, .probe = ltc4151_probe, .id_table = ltc4151_id, diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c index 681b5b7b3c3b..4680d89556ce 100644 --- a/drivers/hwmon/ltc4245.c +++ b/drivers/hwmon/ltc4245.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -53,8 +54,6 @@ enum ltc4245_cmd { struct ltc4245_data { struct i2c_client *client; - const struct attribute_group *groups[3]; - struct mutex update_lock; bool valid; unsigned long last_updated; /* in jiffies */ @@ -162,7 +161,7 @@ static struct ltc4245_data *ltc4245_update_device(struct device *dev) ltc4245_update_gpios(dev); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); @@ -256,214 +255,205 @@ static unsigned int ltc4245_get_current(struct device *dev, u8 reg) return curr; } -static ssize_t ltc4245_show_voltage(struct device *dev, - struct device_attribute *da, - char *buf) +/* Map from voltage channel index to voltage register */ + +static const s8 ltc4245_in_regs[] = { + LTC4245_12VIN, LTC4245_5VIN, LTC4245_3VIN, LTC4245_VEEIN, + LTC4245_12VOUT, LTC4245_5VOUT, LTC4245_3VOUT, LTC4245_VEEOUT, +}; + +/* Map from current channel index to current register */ + +static const s8 ltc4245_curr_regs[] = { + LTC4245_12VSENSE, LTC4245_5VSENSE, LTC4245_3VSENSE, LTC4245_VEESENSE, +}; + +static int ltc4245_read_curr(struct device *dev, u32 attr, int channel, + long *val) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - const int voltage = ltc4245_get_voltage(dev, attr->index); - - return snprintf(buf, PAGE_SIZE, "%d\n", voltage); -} - -static ssize_t ltc4245_show_current(struct device *dev, - struct device_attribute *da, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - const unsigned int curr = ltc4245_get_current(dev, attr->index); - - return snprintf(buf, PAGE_SIZE, "%u\n", curr); -} - -static ssize_t ltc4245_show_power(struct device *dev, - struct device_attribute *da, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - const unsigned int curr = ltc4245_get_current(dev, attr->index); - const int output_voltage = ltc4245_get_voltage(dev, attr->index+1); - - /* current in mA * voltage in mV == power in uW */ - const unsigned int power = abs(output_voltage * curr); - - return snprintf(buf, PAGE_SIZE, "%u\n", power); -} - -static ssize_t ltc4245_show_alarm(struct device *dev, - struct device_attribute *da, - char *buf) -{ - struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da); struct ltc4245_data *data = ltc4245_update_device(dev); - const u8 reg = data->cregs[attr->index]; - const u32 mask = attr->nr; - return snprintf(buf, PAGE_SIZE, "%u\n", (reg & mask) ? 1 : 0); + switch (attr) { + case hwmon_curr_input: + *val = ltc4245_get_current(dev, ltc4245_curr_regs[channel]); + return 0; + case hwmon_curr_max_alarm: + *val = !!(data->cregs[LTC4245_FAULT1] & BIT(channel + 4)); + return 0; + default: + return -EOPNOTSUPP; + } } -static ssize_t ltc4245_show_gpio(struct device *dev, - struct device_attribute *da, - char *buf) +static int ltc4245_read_in(struct device *dev, u32 attr, int channel, long *val) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct ltc4245_data *data = ltc4245_update_device(dev); - int val = data->gpios[attr->index]; - /* handle stale GPIO's */ - if (val < 0) - return val; + switch (attr) { + case hwmon_in_input: + if (channel < 8) { + *val = ltc4245_get_voltage(dev, + ltc4245_in_regs[channel]); + } else { + int regval = data->gpios[channel - 8]; - /* Convert to millivolts and print */ - return snprintf(buf, PAGE_SIZE, "%u\n", val * 10); + if (regval < 0) + return regval; + *val = regval * 10; + } + return 0; + case hwmon_in_min_alarm: + if (channel < 4) + *val = !!(data->cregs[LTC4245_FAULT1] & BIT(channel)); + else + *val = !!(data->cregs[LTC4245_FAULT2] & + BIT(channel - 4)); + return 0; + default: + return -EOPNOTSUPP; + } } -/* Construct a sensor_device_attribute structure for each register */ - -/* Input voltages */ -static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ltc4245_show_voltage, NULL, - LTC4245_12VIN); -static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, ltc4245_show_voltage, NULL, - LTC4245_5VIN); -static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, ltc4245_show_voltage, NULL, - LTC4245_3VIN); -static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, ltc4245_show_voltage, NULL, - LTC4245_VEEIN); - -/* Input undervoltage alarms */ -static SENSOR_DEVICE_ATTR_2(in1_min_alarm, S_IRUGO, ltc4245_show_alarm, NULL, - 1 << 0, LTC4245_FAULT1); -static SENSOR_DEVICE_ATTR_2(in2_min_alarm, S_IRUGO, ltc4245_show_alarm, NULL, - 1 << 1, LTC4245_FAULT1); -static SENSOR_DEVICE_ATTR_2(in3_min_alarm, S_IRUGO, ltc4245_show_alarm, NULL, - 1 << 2, LTC4245_FAULT1); -static SENSOR_DEVICE_ATTR_2(in4_min_alarm, S_IRUGO, ltc4245_show_alarm, NULL, - 1 << 3, LTC4245_FAULT1); - -/* Currents (via sense resistor) */ -static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc4245_show_current, NULL, - LTC4245_12VSENSE); -static SENSOR_DEVICE_ATTR(curr2_input, S_IRUGO, ltc4245_show_current, NULL, - LTC4245_5VSENSE); -static SENSOR_DEVICE_ATTR(curr3_input, S_IRUGO, ltc4245_show_current, NULL, - LTC4245_3VSENSE); -static SENSOR_DEVICE_ATTR(curr4_input, S_IRUGO, ltc4245_show_current, NULL, - LTC4245_VEESENSE); - -/* Overcurrent alarms */ -static SENSOR_DEVICE_ATTR_2(curr1_max_alarm, S_IRUGO, ltc4245_show_alarm, NULL, - 1 << 4, LTC4245_FAULT1); -static SENSOR_DEVICE_ATTR_2(curr2_max_alarm, S_IRUGO, ltc4245_show_alarm, NULL, - 1 << 5, LTC4245_FAULT1); -static SENSOR_DEVICE_ATTR_2(curr3_max_alarm, S_IRUGO, ltc4245_show_alarm, NULL, - 1 << 6, LTC4245_FAULT1); -static SENSOR_DEVICE_ATTR_2(curr4_max_alarm, S_IRUGO, ltc4245_show_alarm, NULL, - 1 << 7, LTC4245_FAULT1); - -/* Output voltages */ -static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, ltc4245_show_voltage, NULL, - LTC4245_12VOUT); -static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, ltc4245_show_voltage, NULL, - LTC4245_5VOUT); -static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, ltc4245_show_voltage, NULL, - LTC4245_3VOUT); -static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, ltc4245_show_voltage, NULL, - LTC4245_VEEOUT); - -/* Power Bad alarms */ -static SENSOR_DEVICE_ATTR_2(in5_min_alarm, S_IRUGO, ltc4245_show_alarm, NULL, - 1 << 0, LTC4245_FAULT2); -static SENSOR_DEVICE_ATTR_2(in6_min_alarm, S_IRUGO, ltc4245_show_alarm, NULL, - 1 << 1, LTC4245_FAULT2); -static SENSOR_DEVICE_ATTR_2(in7_min_alarm, S_IRUGO, ltc4245_show_alarm, NULL, - 1 << 2, LTC4245_FAULT2); -static SENSOR_DEVICE_ATTR_2(in8_min_alarm, S_IRUGO, ltc4245_show_alarm, NULL, - 1 << 3, LTC4245_FAULT2); - -/* GPIO voltages */ -static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, ltc4245_show_gpio, NULL, 0); -static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, ltc4245_show_gpio, NULL, 1); -static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, ltc4245_show_gpio, NULL, 2); - -/* Power Consumption (virtual) */ -static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ltc4245_show_power, NULL, - LTC4245_12VSENSE); -static SENSOR_DEVICE_ATTR(power2_input, S_IRUGO, ltc4245_show_power, NULL, - LTC4245_5VSENSE); -static SENSOR_DEVICE_ATTR(power3_input, S_IRUGO, ltc4245_show_power, NULL, - LTC4245_3VSENSE); -static SENSOR_DEVICE_ATTR(power4_input, S_IRUGO, ltc4245_show_power, NULL, - LTC4245_VEESENSE); - -/* - * Finally, construct an array of pointers to members of the above objects, - * as required for sysfs_create_group() - */ -static struct attribute *ltc4245_std_attributes[] = { - &sensor_dev_attr_in1_input.dev_attr.attr, - &sensor_dev_attr_in2_input.dev_attr.attr, - &sensor_dev_attr_in3_input.dev_attr.attr, - &sensor_dev_attr_in4_input.dev_attr.attr, - - &sensor_dev_attr_in1_min_alarm.dev_attr.attr, - &sensor_dev_attr_in2_min_alarm.dev_attr.attr, - &sensor_dev_attr_in3_min_alarm.dev_attr.attr, - &sensor_dev_attr_in4_min_alarm.dev_attr.attr, - - &sensor_dev_attr_curr1_input.dev_attr.attr, - &sensor_dev_attr_curr2_input.dev_attr.attr, - &sensor_dev_attr_curr3_input.dev_attr.attr, - &sensor_dev_attr_curr4_input.dev_attr.attr, - - &sensor_dev_attr_curr1_max_alarm.dev_attr.attr, - &sensor_dev_attr_curr2_max_alarm.dev_attr.attr, - &sensor_dev_attr_curr3_max_alarm.dev_attr.attr, - &sensor_dev_attr_curr4_max_alarm.dev_attr.attr, - - &sensor_dev_attr_in5_input.dev_attr.attr, - &sensor_dev_attr_in6_input.dev_attr.attr, - &sensor_dev_attr_in7_input.dev_attr.attr, - &sensor_dev_attr_in8_input.dev_attr.attr, - - &sensor_dev_attr_in5_min_alarm.dev_attr.attr, - &sensor_dev_attr_in6_min_alarm.dev_attr.attr, - &sensor_dev_attr_in7_min_alarm.dev_attr.attr, - &sensor_dev_attr_in8_min_alarm.dev_attr.attr, - - &sensor_dev_attr_in9_input.dev_attr.attr, - - &sensor_dev_attr_power1_input.dev_attr.attr, - &sensor_dev_attr_power2_input.dev_attr.attr, - &sensor_dev_attr_power3_input.dev_attr.attr, - &sensor_dev_attr_power4_input.dev_attr.attr, - - NULL, -}; - -static struct attribute *ltc4245_gpio_attributes[] = { - &sensor_dev_attr_in10_input.dev_attr.attr, - &sensor_dev_attr_in11_input.dev_attr.attr, - NULL, -}; - -static const struct attribute_group ltc4245_std_group = { - .attrs = ltc4245_std_attributes, -}; - -static const struct attribute_group ltc4245_gpio_group = { - .attrs = ltc4245_gpio_attributes, -}; - -static void ltc4245_sysfs_add_groups(struct ltc4245_data *data) +static int ltc4245_read_power(struct device *dev, u32 attr, int channel, + long *val) { - /* standard sysfs attributes */ - data->groups[0] = <c4245_std_group; + unsigned long curr; + long voltage; - /* if we're using the extra gpio support, register it's attributes */ - if (data->use_extra_gpios) - data->groups[1] = <c4245_gpio_group; + switch (attr) { + case hwmon_power_input: + (void)ltc4245_update_device(dev); + curr = ltc4245_get_current(dev, ltc4245_curr_regs[channel]); + voltage = ltc4245_get_voltage(dev, ltc4245_in_regs[channel]); + *val = abs(curr * voltage); + return 0; + default: + return -EOPNOTSUPP; + } } +static int ltc4245_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + + switch (type) { + case hwmon_curr: + return ltc4245_read_curr(dev, attr, channel, val); + case hwmon_power: + return ltc4245_read_power(dev, attr, channel, val); + case hwmon_in: + return ltc4245_read_in(dev, attr, channel - 1, val); + default: + return -EOPNOTSUPP; + } +} + +static umode_t ltc4245_is_visible(const void *_data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + const struct ltc4245_data *data = _data; + + switch (type) { + case hwmon_in: + if (channel == 0) + return 0; + switch (attr) { + case hwmon_in_input: + if (channel > 9 && !data->use_extra_gpios) + return 0; + return S_IRUGO; + case hwmon_in_min_alarm: + if (channel > 8) + return 0; + return S_IRUGO; + default: + return 0; + } + case hwmon_curr: + switch (attr) { + case hwmon_curr_input: + case hwmon_curr_max_alarm: + return S_IRUGO; + default: + return 0; + } + case hwmon_power: + switch (attr) { + case hwmon_power_input: + return S_IRUGO; + default: + return 0; + } + default: + return 0; + } +} + +static const u32 ltc4245_in_config[] = { + HWMON_I_INPUT, /* dummy, skipped in is_visible */ + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT | HWMON_I_MIN_ALARM, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + 0 +}; + +static const struct hwmon_channel_info ltc4245_in = { + .type = hwmon_in, + .config = ltc4245_in_config, +}; + +static const u32 ltc4245_curr_config[] = { + HWMON_C_INPUT | HWMON_C_MAX_ALARM, + HWMON_C_INPUT | HWMON_C_MAX_ALARM, + HWMON_C_INPUT | HWMON_C_MAX_ALARM, + HWMON_C_INPUT | HWMON_C_MAX_ALARM, + 0 +}; + +static const struct hwmon_channel_info ltc4245_curr = { + .type = hwmon_curr, + .config = ltc4245_curr_config, +}; + +static const u32 ltc4245_power_config[] = { + HWMON_P_INPUT, + HWMON_P_INPUT, + HWMON_P_INPUT, + HWMON_P_INPUT, + 0 +}; + +static const struct hwmon_channel_info ltc4245_power = { + .type = hwmon_power, + .config = ltc4245_power_config, +}; + +static const struct hwmon_channel_info *ltc4245_info[] = { + <c4245_in, + <c4245_curr, + <c4245_power, + NULL +}; + +static const struct hwmon_ops ltc4245_hwmon_ops = { + .is_visible = ltc4245_is_visible, + .read = ltc4245_read, +}; + +static const struct hwmon_chip_info ltc4245_chip_info = { + .ops = <c4245_hwmon_ops, + .info = ltc4245_info, +}; + static bool ltc4245_use_extra_gpios(struct i2c_client *client) { struct ltc4245_platform_data *pdata = dev_get_platdata(&client->dev); @@ -502,12 +492,10 @@ static int ltc4245_probe(struct i2c_client *client, i2c_smbus_write_byte_data(client, LTC4245_FAULT1, 0x00); i2c_smbus_write_byte_data(client, LTC4245_FAULT2, 0x00); - /* Add sysfs hooks */ - ltc4245_sysfs_add_groups(data); - - hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev, - client->name, data, - data->groups); + hwmon_dev = devm_hwmon_device_register_with_info(&client->dev, + client->name, data, + <c4245_chip_info, + NULL); return PTR_ERR_OR_ZERO(hwmon_dev); } diff --git a/drivers/hwmon/max31790.c b/drivers/hwmon/max31790.c index 69c0ac80a946..bef84e085973 100644 --- a/drivers/hwmon/max31790.c +++ b/drivers/hwmon/max31790.c @@ -17,7 +17,6 @@ #include #include -#include #include #include #include @@ -169,362 +168,288 @@ static u8 bits_for_tach_period(int rpm) return bits; } -static ssize_t get_fan(struct device *dev, - struct device_attribute *devattr, char *buf) +static int max31790_read_fan(struct device *dev, u32 attr, int channel, + long *val) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct max31790_data *data = max31790_update_device(dev); int sr, rpm; if (IS_ERR(data)) return PTR_ERR(data); - sr = get_tach_period(data->fan_dynamics[attr->index]); - rpm = RPM_FROM_REG(data->tach[attr->index], sr); - - return sprintf(buf, "%d\n", rpm); + switch (attr) { + case hwmon_fan_input: + sr = get_tach_period(data->fan_dynamics[channel]); + rpm = RPM_FROM_REG(data->tach[channel], sr); + *val = rpm; + return 0; + case hwmon_fan_target: + sr = get_tach_period(data->fan_dynamics[channel]); + rpm = RPM_FROM_REG(data->target_count[channel], sr); + *val = rpm; + return 0; + case hwmon_fan_fault: + *val = !!(data->fault_status & (1 << channel)); + return 0; + default: + return -EOPNOTSUPP; + } } -static ssize_t get_fan_target(struct device *dev, - struct device_attribute *devattr, char *buf) +static int max31790_write_fan(struct device *dev, u32 attr, int channel, + long val) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct max31790_data *data = max31790_update_device(dev); - int sr, rpm; - - if (IS_ERR(data)) - return PTR_ERR(data); - - sr = get_tach_period(data->fan_dynamics[attr->index]); - rpm = RPM_FROM_REG(data->target_count[attr->index], sr); - - return sprintf(buf, "%d\n", rpm); -} - -static ssize_t set_fan_target(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct max31790_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; + int target_count; + int err = 0; u8 bits; int sr; - int target_count; - unsigned long rpm; - int err; - - err = kstrtoul(buf, 10, &rpm); - if (err) - return err; mutex_lock(&data->update_lock); - rpm = clamp_val(rpm, FAN_RPM_MIN, FAN_RPM_MAX); - bits = bits_for_tach_period(rpm); - data->fan_dynamics[attr->index] = - ((data->fan_dynamics[attr->index] - & ~MAX31790_FAN_DYN_SR_MASK) - | (bits << MAX31790_FAN_DYN_SR_SHIFT)); - err = i2c_smbus_write_byte_data(client, - MAX31790_REG_FAN_DYNAMICS(attr->index), - data->fan_dynamics[attr->index]); + switch (attr) { + case hwmon_fan_target: + val = clamp_val(val, FAN_RPM_MIN, FAN_RPM_MAX); + bits = bits_for_tach_period(val); + data->fan_dynamics[channel] = + ((data->fan_dynamics[channel] & + ~MAX31790_FAN_DYN_SR_MASK) | + (bits << MAX31790_FAN_DYN_SR_SHIFT)); + err = i2c_smbus_write_byte_data(client, + MAX31790_REG_FAN_DYNAMICS(channel), + data->fan_dynamics[channel]); + if (err < 0) + break; - if (err < 0) { - mutex_unlock(&data->update_lock); - return err; - } + sr = get_tach_period(data->fan_dynamics[channel]); + target_count = RPM_TO_REG(val, sr); + target_count = clamp_val(target_count, 0x1, 0x7FF); - sr = get_tach_period(data->fan_dynamics[attr->index]); - target_count = RPM_TO_REG(rpm, sr); - target_count = clamp_val(target_count, 0x1, 0x7FF); + data->target_count[channel] = target_count << 5; - data->target_count[attr->index] = target_count << 5; - - err = i2c_smbus_write_word_swapped(client, - MAX31790_REG_TARGET_COUNT(attr->index), - data->target_count[attr->index]); - - mutex_unlock(&data->update_lock); - - if (err < 0) - return err; - - return count; -} - -static ssize_t get_pwm(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct max31790_data *data = max31790_update_device(dev); - int pwm; - - if (IS_ERR(data)) - return PTR_ERR(data); - - pwm = data->pwm[attr->index] >> 8; - - return sprintf(buf, "%d\n", pwm); -} - -static ssize_t set_pwm(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct max31790_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - unsigned long pwm; - int err; - - err = kstrtoul(buf, 10, &pwm); - if (err) - return err; - - if (pwm > 255) - return -EINVAL; - - mutex_lock(&data->update_lock); - - data->pwm[attr->index] = pwm << 8; - err = i2c_smbus_write_word_swapped(client, - MAX31790_REG_PWMOUT(attr->index), - data->pwm[attr->index]); - - mutex_unlock(&data->update_lock); - - if (err < 0) - return err; - - return count; -} - -static ssize_t get_pwm_enable(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct max31790_data *data = max31790_update_device(dev); - int mode; - - if (IS_ERR(data)) - return PTR_ERR(data); - - if (data->fan_config[attr->index] & MAX31790_FAN_CFG_RPM_MODE) - mode = 2; - else if (data->fan_config[attr->index] & MAX31790_FAN_CFG_TACH_INPUT_EN) - mode = 1; - else - mode = 0; - - return sprintf(buf, "%d\n", mode); -} - -static ssize_t set_pwm_enable(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct max31790_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - unsigned long mode; - int err; - - err = kstrtoul(buf, 10, &mode); - if (err) - return err; - - switch (mode) { - case 0: - data->fan_config[attr->index] = - data->fan_config[attr->index] - & ~(MAX31790_FAN_CFG_TACH_INPUT_EN - | MAX31790_FAN_CFG_RPM_MODE); - break; - case 1: - data->fan_config[attr->index] = - (data->fan_config[attr->index] - | MAX31790_FAN_CFG_TACH_INPUT_EN) - & ~MAX31790_FAN_CFG_RPM_MODE; - break; - case 2: - data->fan_config[attr->index] = - data->fan_config[attr->index] - | MAX31790_FAN_CFG_TACH_INPUT_EN - | MAX31790_FAN_CFG_RPM_MODE; + err = i2c_smbus_write_word_swapped(client, + MAX31790_REG_TARGET_COUNT(channel), + data->target_count[channel]); break; default: - return -EINVAL; + err = -EOPNOTSUPP; + break; } - mutex_lock(&data->update_lock); - - err = i2c_smbus_write_byte_data(client, - MAX31790_REG_FAN_CONFIG(attr->index), - data->fan_config[attr->index]); - mutex_unlock(&data->update_lock); - if (err < 0) - return err; - - return count; + return err; } -static ssize_t get_fan_fault(struct device *dev, - struct device_attribute *devattr, char *buf) +static umode_t max31790_fan_is_visible(const void *_data, u32 attr, int channel) +{ + const struct max31790_data *data = _data; + u8 fan_config = data->fan_config[channel % NR_CHANNEL]; + + switch (attr) { + case hwmon_fan_input: + case hwmon_fan_fault: + if (channel < NR_CHANNEL || + (fan_config & MAX31790_FAN_CFG_TACH_INPUT)) + return S_IRUGO; + return 0; + case hwmon_fan_target: + if (channel < NR_CHANNEL && + !(fan_config & MAX31790_FAN_CFG_TACH_INPUT)) + return S_IRUGO | S_IWUSR; + return 0; + default: + return 0; + } +} + +static int max31790_read_pwm(struct device *dev, u32 attr, int channel, + long *val) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct max31790_data *data = max31790_update_device(dev); - int fault; + u8 fan_config = data->fan_config[channel]; if (IS_ERR(data)) return PTR_ERR(data); - fault = !!(data->fault_status & (1 << attr->index)); - - return sprintf(buf, "%d\n", fault); + switch (attr) { + case hwmon_pwm_input: + *val = data->pwm[channel] >> 8; + return 0; + case hwmon_pwm_enable: + if (fan_config & MAX31790_FAN_CFG_RPM_MODE) + *val = 2; + else if (fan_config & MAX31790_FAN_CFG_TACH_INPUT_EN) + *val = 1; + else + *val = 0; + return 0; + default: + return -EOPNOTSUPP; + } } -static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan, NULL, 0); -static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, get_fan, NULL, 1); -static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, get_fan, NULL, 2); -static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, get_fan, NULL, 3); -static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, get_fan, NULL, 4); -static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, get_fan, NULL, 5); +static int max31790_write_pwm(struct device *dev, u32 attr, int channel, + long val) +{ + struct max31790_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + u8 fan_config; + int err = 0; -static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, get_fan_fault, NULL, 0); -static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, get_fan_fault, NULL, 1); -static SENSOR_DEVICE_ATTR(fan3_fault, S_IRUGO, get_fan_fault, NULL, 2); -static SENSOR_DEVICE_ATTR(fan4_fault, S_IRUGO, get_fan_fault, NULL, 3); -static SENSOR_DEVICE_ATTR(fan5_fault, S_IRUGO, get_fan_fault, NULL, 4); -static SENSOR_DEVICE_ATTR(fan6_fault, S_IRUGO, get_fan_fault, NULL, 5); + mutex_lock(&data->update_lock); -static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, get_fan, NULL, 6); -static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, get_fan, NULL, 7); -static SENSOR_DEVICE_ATTR(fan9_input, S_IRUGO, get_fan, NULL, 8); -static SENSOR_DEVICE_ATTR(fan10_input, S_IRUGO, get_fan, NULL, 9); -static SENSOR_DEVICE_ATTR(fan11_input, S_IRUGO, get_fan, NULL, 10); -static SENSOR_DEVICE_ATTR(fan12_input, S_IRUGO, get_fan, NULL, 11); + switch (attr) { + case hwmon_pwm_input: + if (val < 0 || val > 255) { + err = -EINVAL; + break; + } + data->pwm[channel] = val << 8; + err = i2c_smbus_write_word_swapped(client, + MAX31790_REG_PWMOUT(channel), + val); + break; + case hwmon_pwm_enable: + fan_config = data->fan_config[channel]; + if (val == 0) { + fan_config &= ~(MAX31790_FAN_CFG_TACH_INPUT_EN | + MAX31790_FAN_CFG_RPM_MODE); + } else if (val == 1) { + fan_config = (fan_config | + MAX31790_FAN_CFG_TACH_INPUT_EN) & + ~MAX31790_FAN_CFG_RPM_MODE; + } else if (val == 2) { + fan_config |= MAX31790_FAN_CFG_TACH_INPUT_EN | + MAX31790_FAN_CFG_RPM_MODE; + } else { + err = -EINVAL; + break; + } + data->fan_config[channel] = fan_config; + err = i2c_smbus_write_byte_data(client, + MAX31790_REG_FAN_CONFIG(channel), + fan_config); + break; + default: + err = -EOPNOTSUPP; + break; + } -static SENSOR_DEVICE_ATTR(fan7_fault, S_IRUGO, get_fan_fault, NULL, 6); -static SENSOR_DEVICE_ATTR(fan8_fault, S_IRUGO, get_fan_fault, NULL, 7); -static SENSOR_DEVICE_ATTR(fan9_fault, S_IRUGO, get_fan_fault, NULL, 8); -static SENSOR_DEVICE_ATTR(fan10_fault, S_IRUGO, get_fan_fault, NULL, 9); -static SENSOR_DEVICE_ATTR(fan11_fault, S_IRUGO, get_fan_fault, NULL, 10); -static SENSOR_DEVICE_ATTR(fan12_fault, S_IRUGO, get_fan_fault, NULL, 11); + mutex_unlock(&data->update_lock); -static SENSOR_DEVICE_ATTR(fan1_target, S_IWUSR | S_IRUGO, - get_fan_target, set_fan_target, 0); -static SENSOR_DEVICE_ATTR(fan2_target, S_IWUSR | S_IRUGO, - get_fan_target, set_fan_target, 1); -static SENSOR_DEVICE_ATTR(fan3_target, S_IWUSR | S_IRUGO, - get_fan_target, set_fan_target, 2); -static SENSOR_DEVICE_ATTR(fan4_target, S_IWUSR | S_IRUGO, - get_fan_target, set_fan_target, 3); -static SENSOR_DEVICE_ATTR(fan5_target, S_IWUSR | S_IRUGO, - get_fan_target, set_fan_target, 4); -static SENSOR_DEVICE_ATTR(fan6_target, S_IWUSR | S_IRUGO, - get_fan_target, set_fan_target, 5); + return err; +} -static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm, set_pwm, 0); -static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, get_pwm, set_pwm, 1); -static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, get_pwm, set_pwm, 2); -static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, get_pwm, set_pwm, 3); -static SENSOR_DEVICE_ATTR(pwm5, S_IWUSR | S_IRUGO, get_pwm, set_pwm, 4); -static SENSOR_DEVICE_ATTR(pwm6, S_IWUSR | S_IRUGO, get_pwm, set_pwm, 5); +static umode_t max31790_pwm_is_visible(const void *_data, u32 attr, int channel) +{ + const struct max31790_data *data = _data; + u8 fan_config = data->fan_config[channel]; -static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, - get_pwm_enable, set_pwm_enable, 0); -static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, - get_pwm_enable, set_pwm_enable, 1); -static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, - get_pwm_enable, set_pwm_enable, 2); -static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, - get_pwm_enable, set_pwm_enable, 3); -static SENSOR_DEVICE_ATTR(pwm5_enable, S_IWUSR | S_IRUGO, - get_pwm_enable, set_pwm_enable, 4); -static SENSOR_DEVICE_ATTR(pwm6_enable, S_IWUSR | S_IRUGO, - get_pwm_enable, set_pwm_enable, 5); + switch (attr) { + case hwmon_pwm_input: + case hwmon_pwm_enable: + if (!(fan_config & MAX31790_FAN_CFG_TACH_INPUT)) + return S_IRUGO | S_IWUSR; + return 0; + default: + return 0; + } +} -static struct attribute *max31790_attrs[] = { - &sensor_dev_attr_fan1_input.dev_attr.attr, - &sensor_dev_attr_fan2_input.dev_attr.attr, - &sensor_dev_attr_fan3_input.dev_attr.attr, - &sensor_dev_attr_fan4_input.dev_attr.attr, - &sensor_dev_attr_fan5_input.dev_attr.attr, - &sensor_dev_attr_fan6_input.dev_attr.attr, +static int max31790_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + switch (type) { + case hwmon_fan: + return max31790_read_fan(dev, attr, channel, val); + case hwmon_pwm: + return max31790_read_pwm(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } +} - &sensor_dev_attr_fan1_fault.dev_attr.attr, - &sensor_dev_attr_fan2_fault.dev_attr.attr, - &sensor_dev_attr_fan3_fault.dev_attr.attr, - &sensor_dev_attr_fan4_fault.dev_attr.attr, - &sensor_dev_attr_fan5_fault.dev_attr.attr, - &sensor_dev_attr_fan6_fault.dev_attr.attr, +static int max31790_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + switch (type) { + case hwmon_fan: + return max31790_write_fan(dev, attr, channel, val); + case hwmon_pwm: + return max31790_write_pwm(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } +} - &sensor_dev_attr_fan7_input.dev_attr.attr, - &sensor_dev_attr_fan8_input.dev_attr.attr, - &sensor_dev_attr_fan9_input.dev_attr.attr, - &sensor_dev_attr_fan10_input.dev_attr.attr, - &sensor_dev_attr_fan11_input.dev_attr.attr, - &sensor_dev_attr_fan12_input.dev_attr.attr, +static umode_t max31790_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_fan: + return max31790_fan_is_visible(data, attr, channel); + case hwmon_pwm: + return max31790_pwm_is_visible(data, attr, channel); + default: + return 0; + } +} - &sensor_dev_attr_fan7_fault.dev_attr.attr, - &sensor_dev_attr_fan8_fault.dev_attr.attr, - &sensor_dev_attr_fan9_fault.dev_attr.attr, - &sensor_dev_attr_fan10_fault.dev_attr.attr, - &sensor_dev_attr_fan11_fault.dev_attr.attr, - &sensor_dev_attr_fan12_fault.dev_attr.attr, +static const u32 max31790_fan_config[] = { + HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + 0 +}; - &sensor_dev_attr_fan1_target.dev_attr.attr, - &sensor_dev_attr_fan2_target.dev_attr.attr, - &sensor_dev_attr_fan3_target.dev_attr.attr, - &sensor_dev_attr_fan4_target.dev_attr.attr, - &sensor_dev_attr_fan5_target.dev_attr.attr, - &sensor_dev_attr_fan6_target.dev_attr.attr, +static const struct hwmon_channel_info max31790_fan = { + .type = hwmon_fan, + .config = max31790_fan_config, +}; - &sensor_dev_attr_pwm1.dev_attr.attr, - &sensor_dev_attr_pwm2.dev_attr.attr, - &sensor_dev_attr_pwm3.dev_attr.attr, - &sensor_dev_attr_pwm4.dev_attr.attr, - &sensor_dev_attr_pwm5.dev_attr.attr, - &sensor_dev_attr_pwm6.dev_attr.attr, +static const u32 max31790_pwm_config[] = { + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + 0 +}; - &sensor_dev_attr_pwm1_enable.dev_attr.attr, - &sensor_dev_attr_pwm2_enable.dev_attr.attr, - &sensor_dev_attr_pwm3_enable.dev_attr.attr, - &sensor_dev_attr_pwm4_enable.dev_attr.attr, - &sensor_dev_attr_pwm5_enable.dev_attr.attr, - &sensor_dev_attr_pwm6_enable.dev_attr.attr, +static const struct hwmon_channel_info max31790_pwm = { + .type = hwmon_pwm, + .config = max31790_pwm_config, +}; + +static const struct hwmon_channel_info *max31790_info[] = { + &max31790_fan, + &max31790_pwm, NULL }; -static umode_t max31790_attrs_visible(struct kobject *kobj, - struct attribute *a, int n) -{ - struct device *dev = container_of(kobj, struct device, kobj); - struct max31790_data *data = dev_get_drvdata(dev); - struct device_attribute *devattr = - container_of(a, struct device_attribute, attr); - int index = to_sensor_dev_attr(devattr)->index % NR_CHANNEL; - u8 fan_config; - - fan_config = data->fan_config[index]; - - if (n >= NR_CHANNEL * 2 && n < NR_CHANNEL * 4 && - !(fan_config & MAX31790_FAN_CFG_TACH_INPUT)) - return 0; - if (n >= NR_CHANNEL * 4 && (fan_config & MAX31790_FAN_CFG_TACH_INPUT)) - return 0; - - return a->mode; -} - -static const struct attribute_group max31790_group = { - .attrs = max31790_attrs, - .is_visible = max31790_attrs_visible, +static const struct hwmon_ops max31790_hwmon_ops = { + .is_visible = max31790_is_visible, + .read = max31790_read, + .write = max31790_write, +}; + +static const struct hwmon_chip_info max31790_chip_info = { + .ops = &max31790_hwmon_ops, + .info = max31790_info, }; -__ATTRIBUTE_GROUPS(max31790); static int max31790_init_client(struct i2c_client *client, struct max31790_data *data) @@ -575,8 +500,10 @@ static int max31790_probe(struct i2c_client *client, if (err) return err; - hwmon_dev = devm_hwmon_device_register_with_groups(dev, - client->name, data, max31790_groups); + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, + data, + &max31790_chip_info, + NULL); return PTR_ERR_OR_ZERO(hwmon_dev); } diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c index 162a520f4bd6..a993b44ed538 100644 --- a/drivers/hwmon/max6650.c +++ b/drivers/hwmon/max6650.c @@ -39,6 +39,7 @@ #include #include #include +#include /* * Insmod parameters @@ -48,7 +49,7 @@ static int fan_voltage; /* prescaler: Possible values are 1, 2, 4, 8, 16 or 0 for don't change */ static int prescaler; -/* clock: The clock frequency of the chip the driver should assume */ +/* clock: The clock frequency of the chip (max6651 can be clocked externally) */ static int clock = 254000; module_param(fan_voltage, int, S_IRUGO); @@ -133,6 +134,19 @@ static const u8 tach_reg[] = { MAX6650_REG_TACH3, }; +static const struct of_device_id max6650_dt_match[] = { + { + .compatible = "maxim,max6650", + .data = (void *)1 + }, + { + .compatible = "maxim,max6651", + .data = (void *)4 + }, + { }, +}; +MODULE_DEVICE_TABLE(of, max6650_dt_match); + static struct max6650_data *max6650_update_device(struct device *dev) { struct max6650_data *data = dev_get_drvdata(dev); @@ -171,6 +185,30 @@ static struct max6650_data *max6650_update_device(struct device *dev) return data; } +/* + * Change the operating mode of the chip (if needed). + * mode is one of the MAX6650_CFG_MODE_* values. + */ +static int max6650_set_operating_mode(struct max6650_data *data, u8 mode) +{ + int result; + u8 config = data->config; + + if (mode == (config & MAX6650_CFG_MODE_MASK)) + return 0; + + config = (config & ~MAX6650_CFG_MODE_MASK) | mode; + + result = i2c_smbus_write_byte_data(data->client, MAX6650_REG_CONFIG, + config); + if (result < 0) + return result; + + data->config = config; + + return 0; +} + static ssize_t get_fan(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -252,18 +290,12 @@ static ssize_t get_target(struct device *dev, struct device_attribute *devattr, return sprintf(buf, "%d\n", rpm); } -static ssize_t set_target(struct device *dev, struct device_attribute *devattr, - const char *buf, size_t count) +static int max6650_set_target(struct max6650_data *data, unsigned long rpm) { - struct max6650_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; int kscale, ktach; - unsigned long rpm; - int err; - err = kstrtoul(buf, 10, &rpm); - if (err) - return err; + if (rpm == 0) + return max6650_set_operating_mode(data, MAX6650_CFG_MODE_OFF); rpm = clamp_val(rpm, FAN_RPM_MIN, FAN_RPM_MAX); @@ -274,8 +306,6 @@ static ssize_t set_target(struct device *dev, struct device_attribute *devattr, * KTACH = [(fCLK x KSCALE) / (256 x FanSpeed)] - 1 */ - mutex_lock(&data->update_lock); - kscale = DIV_FROM_REG(data->config); ktach = ((clock * kscale) / (256 * rpm / 60)) - 1; if (ktach < 0) @@ -284,10 +314,30 @@ static ssize_t set_target(struct device *dev, struct device_attribute *devattr, ktach = 255; data->speed = ktach; - i2c_smbus_write_byte_data(client, MAX6650_REG_SPEED, data->speed); + return i2c_smbus_write_byte_data(data->client, MAX6650_REG_SPEED, + data->speed); +} + +static ssize_t set_target(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct max6650_data *data = dev_get_drvdata(dev); + unsigned long rpm; + int err; + + err = kstrtoul(buf, 10, &rpm); + if (err) + return err; + + mutex_lock(&data->update_lock); + + err = max6650_set_target(data, rpm); mutex_unlock(&data->update_lock); + if (err < 0) + return err; + return count; } @@ -341,12 +391,11 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, data->dac = 180 - (180 * pwm)/255; else data->dac = 76 - (76 * pwm)/255; - - i2c_smbus_write_byte_data(client, MAX6650_REG_DAC, data->dac); + err = i2c_smbus_write_byte_data(client, MAX6650_REG_DAC, data->dac); mutex_unlock(&data->update_lock); - return count; + return err < 0 ? err : count; } /* @@ -355,14 +404,14 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, * 0 = Fan always on * 1 = Open loop, Voltage is set according to speed, not regulated. * 2 = Closed loop, RPM for all fans regulated by fan1 tachometer + * 3 = Fan off */ - static ssize_t get_enable(struct device *dev, struct device_attribute *devattr, char *buf) { struct max6650_data *data = max6650_update_device(dev); int mode = (data->config & MAX6650_CFG_MODE_MASK) >> 4; - int sysfs_modes[4] = {0, 1, 2, 1}; + int sysfs_modes[4] = {0, 3, 2, 1}; return sprintf(buf, "%d\n", sysfs_modes[mode]); } @@ -371,25 +420,25 @@ static ssize_t set_enable(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct max6650_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - int max6650_modes[3] = {0, 3, 2}; unsigned long mode; int err; + const u8 max6650_modes[] = { + MAX6650_CFG_MODE_ON, + MAX6650_CFG_MODE_OPEN_LOOP, + MAX6650_CFG_MODE_CLOSED_LOOP, + MAX6650_CFG_MODE_OFF, + }; err = kstrtoul(buf, 10, &mode); if (err) return err; - if (mode > 2) + if (mode >= ARRAY_SIZE(max6650_modes)) return -EINVAL; mutex_lock(&data->update_lock); - data->config = i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG); - data->config = (data->config & ~MAX6650_CFG_MODE_MASK) - | (max6650_modes[mode] << 4); - - i2c_smbus_write_byte_data(client, MAX6650_REG_CONFIG, data->config); + max6650_set_operating_mode(data, max6650_modes[mode]); mutex_unlock(&data->update_lock); @@ -566,6 +615,18 @@ static int max6650_init_client(struct max6650_data *data, struct device *dev = &client->dev; int config; int err = -EIO; + u32 voltage; + u32 prescale; + u32 target_rpm; + + if (of_property_read_u32(dev->of_node, "maxim,fan-microvolt", + &voltage)) + voltage = fan_voltage; + else + voltage /= 1000000; /* Microvolts to volts */ + if (of_property_read_u32(dev->of_node, "maxim,fan-prescale", + &prescale)) + prescale = prescaler; config = i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG); @@ -574,7 +635,7 @@ static int max6650_init_client(struct max6650_data *data, return err; } - switch (fan_voltage) { + switch (voltage) { case 0: break; case 5: @@ -584,14 +645,10 @@ static int max6650_init_client(struct max6650_data *data, config |= MAX6650_CFG_V12; break; default: - dev_err(dev, "illegal value for fan_voltage (%d)\n", - fan_voltage); + dev_err(dev, "illegal value for fan_voltage (%d)\n", voltage); } - dev_info(dev, "Fan voltage is set to %dV.\n", - (config & MAX6650_CFG_V12) ? 12 : 5); - - switch (prescaler) { + switch (prescale) { case 0: break; case 1: @@ -614,28 +671,13 @@ static int max6650_init_client(struct max6650_data *data, | MAX6650_CFG_PRESCALER_16; break; default: - dev_err(dev, "illegal value for prescaler (%d)\n", prescaler); + dev_err(dev, "illegal value for prescaler (%d)\n", prescale); } - dev_info(dev, "Prescaler is set to %d.\n", + dev_info(dev, "Fan voltage: %dV, prescaler: %d.\n", + (config & MAX6650_CFG_V12) ? 12 : 5, 1 << (config & MAX6650_CFG_PRESCALER_MASK)); - /* - * If mode is set to "full off", we change it to "open loop" and - * set DAC to 255, which has the same effect. We do this because - * there's no "full off" mode defined in hwmon specifications. - */ - - if ((config & MAX6650_CFG_MODE_MASK) == MAX6650_CFG_MODE_OFF) { - dev_dbg(dev, "Change mode to open loop, full off.\n"); - config = (config & ~MAX6650_CFG_MODE_MASK) - | MAX6650_CFG_MODE_OPEN_LOOP; - if (i2c_smbus_write_byte_data(client, MAX6650_REG_DAC, 255)) { - dev_err(dev, "DAC write error, aborting.\n"); - return err; - } - } - if (i2c_smbus_write_byte_data(client, MAX6650_REG_CONFIG, config)) { dev_err(dev, "Config write error, aborting.\n"); return err; @@ -644,6 +686,12 @@ static int max6650_init_client(struct max6650_data *data, data->config = config; data->count = i2c_smbus_read_byte_data(client, MAX6650_REG_COUNT); + if (!of_property_read_u32(client->dev.of_node, "maxim,fan-target-rpm", + &target_rpm)) { + max6650_set_target(data, target_rpm); + max6650_set_operating_mode(data, MAX6650_CFG_MODE_CLOSED_LOOP); + } + return 0; } @@ -651,6 +699,8 @@ static int max6650_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device *dev = &client->dev; + const struct of_device_id *of_id = + of_match_device(of_match_ptr(max6650_dt_match), dev); struct max6650_data *data; struct device *hwmon_dev; int err; @@ -661,7 +711,7 @@ static int max6650_probe(struct i2c_client *client, data->client = client; mutex_init(&data->update_lock); - data->nr_fans = id->driver_data; + data->nr_fans = of_id ? (int)(uintptr_t)of_id->data : id->driver_data; /* * Initialize the max6650 chip @@ -691,6 +741,7 @@ MODULE_DEVICE_TABLE(i2c, max6650_id); static struct i2c_driver max6650_driver = { .driver = { .name = "max6650", + .of_match_table = of_match_ptr(max6650_dt_match), }, .probe = max6650_probe, .id_table = max6650_id, diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index d087a8e00cf5..ce75dd4db7eb 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -195,6 +195,8 @@ superio_exit(int ioreg) #define NUM_FAN 6 +#define TEMP_SOURCE_VIRTUAL 0x1f + /* Common and NCT6775 specific data */ /* Voltage min/max registers for nr=7..14 are in bank 5 */ @@ -3940,7 +3942,7 @@ static int nct6775_probe(struct platform_device *pdev) continue; src = nct6775_read_value(data, data->REG_TEMP_SEL[i]) & 0x1f; - if (!src || (mask & (1 << src))) + if (!src) continue; if (src >= data->temp_label_num || @@ -3952,7 +3954,16 @@ static int nct6775_probe(struct platform_device *pdev) continue; } - mask |= 1 << src; + /* + * For virtual temperature sources, the 'virtual' temperature + * for each fan reflects a different temperature, and there + * are no duplicates. + */ + if (src != TEMP_SOURCE_VIRTUAL) { + if (mask & (1 << src)) + continue; + mask |= 1 << src; + } /* Use fixed index for SYSTIN(1), CPUTIN(2), AUXTIN(3) */ if (src <= data->temp_fixed_num) { @@ -4232,11 +4243,11 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data) if (err) return err; - if (force_id) + val = (superio_inb(sioaddr, SIO_REG_DEVID) << 8) | + superio_inb(sioaddr, SIO_REG_DEVID + 1); + if (force_id && val != 0xffff) val = force_id; - else - val = (superio_inb(sioaddr, SIO_REG_DEVID) << 8) - | superio_inb(sioaddr, SIO_REG_DEVID + 1); + switch (val & SIO_ID_MASK) { case SIO_NCT6106_ID: sio_data->kind = nct6106; diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c index 08ff89d222e5..95a68ab175c7 100644 --- a/drivers/hwmon/nct7904.c +++ b/drivers/hwmon/nct7904.c @@ -21,7 +21,6 @@ #include #include #include -#include #define VENDOR_ID_REG 0x7A /* Any bank */ #define NUVOTON_ID 0x50 @@ -153,341 +152,230 @@ static int nct7904_write_reg(struct nct7904_data *data, return ret; } -/* FANIN ATTR */ -static ssize_t show_fan(struct device *dev, - struct device_attribute *devattr, char *buf) +static int nct7904_read_fan(struct device *dev, u32 attr, int channel, + long *val) { - int index = to_sensor_dev_attr(devattr)->index; struct nct7904_data *data = dev_get_drvdata(dev); + unsigned int cnt, rpm; int ret; - unsigned cnt, rpm; - ret = nct7904_read_reg16(data, BANK_0, FANIN1_HV_REG + index * 2); - if (ret < 0) - return ret; - cnt = ((ret & 0xff00) >> 3) | (ret & 0x1f); - if (cnt == 0x1fff) - rpm = 0; - else - rpm = 1350000 / cnt; - return sprintf(buf, "%u\n", rpm); + switch(attr) { + case hwmon_fan_input: + ret = nct7904_read_reg16(data, BANK_0, + FANIN1_HV_REG + channel * 2); + if (ret < 0) + return ret; + cnt = ((ret & 0xff00) >> 3) | (ret & 0x1f); + if (cnt == 0x1fff) + rpm = 0; + else + rpm = 1350000 / cnt; + *val = rpm; + return 0; + default: + return -EOPNOTSUPP; + } } -static umode_t nct7904_fanin_is_visible(struct kobject *kobj, - struct attribute *a, int n) +static umode_t nct7904_fan_is_visible(const void *_data, u32 attr, int channel) { - struct device *dev = container_of(kobj, struct device, kobj); - struct nct7904_data *data = dev_get_drvdata(dev); + const struct nct7904_data *data = _data; - if (data->fanin_mask & (1 << n)) - return a->mode; + if (attr == hwmon_fan_input && data->fanin_mask & (1 << channel)) + return S_IRUGO; return 0; } -static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); -static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); -static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); -static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3); -static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4); -static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 5); -static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 6); -static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan, NULL, 7); -static SENSOR_DEVICE_ATTR(fan9_input, S_IRUGO, show_fan, NULL, 8); -static SENSOR_DEVICE_ATTR(fan10_input, S_IRUGO, show_fan, NULL, 9); -static SENSOR_DEVICE_ATTR(fan11_input, S_IRUGO, show_fan, NULL, 10); -static SENSOR_DEVICE_ATTR(fan12_input, S_IRUGO, show_fan, NULL, 11); - -static struct attribute *nct7904_fanin_attrs[] = { - &sensor_dev_attr_fan1_input.dev_attr.attr, - &sensor_dev_attr_fan2_input.dev_attr.attr, - &sensor_dev_attr_fan3_input.dev_attr.attr, - &sensor_dev_attr_fan4_input.dev_attr.attr, - &sensor_dev_attr_fan5_input.dev_attr.attr, - &sensor_dev_attr_fan6_input.dev_attr.attr, - &sensor_dev_attr_fan7_input.dev_attr.attr, - &sensor_dev_attr_fan8_input.dev_attr.attr, - &sensor_dev_attr_fan9_input.dev_attr.attr, - &sensor_dev_attr_fan10_input.dev_attr.attr, - &sensor_dev_attr_fan11_input.dev_attr.attr, - &sensor_dev_attr_fan12_input.dev_attr.attr, - NULL +static u8 nct7904_chan_to_index[] = { + 0, /* Not used */ + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 18, 19, 20, 16 }; -static const struct attribute_group nct7904_fanin_group = { - .attrs = nct7904_fanin_attrs, - .is_visible = nct7904_fanin_is_visible, -}; - -/* VSEN ATTR */ -static ssize_t show_voltage(struct device *dev, - struct device_attribute *devattr, char *buf) +static int nct7904_read_in(struct device *dev, u32 attr, int channel, + long *val) { - int index = to_sensor_dev_attr(devattr)->index; struct nct7904_data *data = dev_get_drvdata(dev); - int ret; - int volt; + int ret, volt, index; - ret = nct7904_read_reg16(data, BANK_0, VSEN1_HV_REG + index * 2); - if (ret < 0) - return ret; - volt = ((ret & 0xff00) >> 5) | (ret & 0x7); - if (index < 14) - volt *= 2; /* 0.002V scale */ - else - volt *= 6; /* 0.006V scale */ + index = nct7904_chan_to_index[channel]; - return sprintf(buf, "%d\n", volt); + switch(attr) { + case hwmon_in_input: + ret = nct7904_read_reg16(data, BANK_0, + VSEN1_HV_REG + index * 2); + if (ret < 0) + return ret; + volt = ((ret & 0xff00) >> 5) | (ret & 0x7); + if (index < 14) + volt *= 2; /* 0.002V scale */ + else + volt *= 6; /* 0.006V scale */ + *val = volt; + return 0; + default: + return -EOPNOTSUPP; + } } -static ssize_t show_ltemp(struct device *dev, - struct device_attribute *devattr, char *buf) +static umode_t nct7904_in_is_visible(const void *_data, u32 attr, int channel) { - struct nct7904_data *data = dev_get_drvdata(dev); - int ret; - int temp; + const struct nct7904_data *data = _data; + int index = nct7904_chan_to_index[channel]; - ret = nct7904_read_reg16(data, BANK_0, LTD_HV_REG); - if (ret < 0) - return ret; - temp = ((ret & 0xff00) >> 5) | (ret & 0x7); - temp = sign_extend32(temp, 10) * 125; + if (channel > 0 && attr == hwmon_in_input && + (data->vsen_mask & BIT(index))) + return S_IRUGO; - return sprintf(buf, "%d\n", temp); -} - -static umode_t nct7904_vsen_is_visible(struct kobject *kobj, - struct attribute *a, int n) -{ - struct device *dev = container_of(kobj, struct device, kobj); - struct nct7904_data *data = dev_get_drvdata(dev); - - if (data->vsen_mask & (1 << n)) - return a->mode; return 0; } -static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 0); -static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 1); -static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_voltage, NULL, 2); -static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_voltage, NULL, 3); -static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 4); -static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 5); -static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 6); -static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_voltage, NULL, 7); -static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_voltage, NULL, 8); -static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_voltage, NULL, 9); -static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_voltage, NULL, 10); -static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_voltage, NULL, 11); -static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_voltage, NULL, 12); -static SENSOR_DEVICE_ATTR(in14_input, S_IRUGO, show_voltage, NULL, 13); -/* - * Next 3 voltage sensors have specific names in the Nuvoton doc - * (3VDD, VBAT, 3VSB) but we use vacant numbers for them. - */ -static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, show_voltage, NULL, 14); -static SENSOR_DEVICE_ATTR(in16_input, S_IRUGO, show_voltage, NULL, 15); -static SENSOR_DEVICE_ATTR(in20_input, S_IRUGO, show_voltage, NULL, 16); -/* This is not a voltage, but a local temperature sensor. */ -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_ltemp, NULL, 0); -static SENSOR_DEVICE_ATTR(in17_input, S_IRUGO, show_voltage, NULL, 18); -static SENSOR_DEVICE_ATTR(in18_input, S_IRUGO, show_voltage, NULL, 19); -static SENSOR_DEVICE_ATTR(in19_input, S_IRUGO, show_voltage, NULL, 20); - -static struct attribute *nct7904_vsen_attrs[] = { - &sensor_dev_attr_in1_input.dev_attr.attr, - &sensor_dev_attr_in2_input.dev_attr.attr, - &sensor_dev_attr_in3_input.dev_attr.attr, - &sensor_dev_attr_in4_input.dev_attr.attr, - &sensor_dev_attr_in5_input.dev_attr.attr, - &sensor_dev_attr_in6_input.dev_attr.attr, - &sensor_dev_attr_in7_input.dev_attr.attr, - &sensor_dev_attr_in8_input.dev_attr.attr, - &sensor_dev_attr_in9_input.dev_attr.attr, - &sensor_dev_attr_in10_input.dev_attr.attr, - &sensor_dev_attr_in11_input.dev_attr.attr, - &sensor_dev_attr_in12_input.dev_attr.attr, - &sensor_dev_attr_in13_input.dev_attr.attr, - &sensor_dev_attr_in14_input.dev_attr.attr, - &sensor_dev_attr_in15_input.dev_attr.attr, - &sensor_dev_attr_in16_input.dev_attr.attr, - &sensor_dev_attr_in20_input.dev_attr.attr, - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_in17_input.dev_attr.attr, - &sensor_dev_attr_in18_input.dev_attr.attr, - &sensor_dev_attr_in19_input.dev_attr.attr, - NULL -}; - -static const struct attribute_group nct7904_vsen_group = { - .attrs = nct7904_vsen_attrs, - .is_visible = nct7904_vsen_is_visible, -}; - -/* CPU_TEMP ATTR */ -static ssize_t show_tcpu(struct device *dev, - struct device_attribute *devattr, char *buf) +static int nct7904_read_temp(struct device *dev, u32 attr, int channel, + long *val) { - int index = to_sensor_dev_attr(devattr)->index; struct nct7904_data *data = dev_get_drvdata(dev); - int ret; - int temp; + int ret, temp; - ret = nct7904_read_reg16(data, BANK_0, T_CPU1_HV_REG + index * 2); - if (ret < 0) - return ret; - - temp = ((ret & 0xff00) >> 5) | (ret & 0x7); - temp = sign_extend32(temp, 10) * 125; - return sprintf(buf, "%d\n", temp); + switch(attr) { + case hwmon_temp_input: + if (channel == 0) + ret = nct7904_read_reg16(data, BANK_0, LTD_HV_REG); + else + ret = nct7904_read_reg16(data, BANK_0, + T_CPU1_HV_REG + (channel - 1) * 2); + if (ret < 0) + return ret; + temp = ((ret & 0xff00) >> 5) | (ret & 0x7); + *val = sign_extend32(temp, 10) * 125; + return 0; + default: + return -EOPNOTSUPP; + } } -static umode_t nct7904_tcpu_is_visible(struct kobject *kobj, - struct attribute *a, int n) +static umode_t nct7904_temp_is_visible(const void *_data, u32 attr, int channel) { - struct device *dev = container_of(kobj, struct device, kobj); - struct nct7904_data *data = dev_get_drvdata(dev); + const struct nct7904_data *data = _data; + + if (attr == hwmon_temp_input) { + if (channel == 0) { + if (data->vsen_mask & BIT(17)) + return S_IRUGO; + } else { + if (data->tcpu_mask & BIT(channel - 1)) + return S_IRUGO; + } + } - if (data->tcpu_mask & (1 << n)) - return a->mode; return 0; } -/* "temp1_input" reserved for local temp */ -static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_tcpu, NULL, 0); -static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_tcpu, NULL, 1); -static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_tcpu, NULL, 2); -static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_tcpu, NULL, 3); -static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_tcpu, NULL, 4); -static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, show_tcpu, NULL, 5); -static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_tcpu, NULL, 6); -static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO, show_tcpu, NULL, 7); - -static struct attribute *nct7904_tcpu_attrs[] = { - &sensor_dev_attr_temp2_input.dev_attr.attr, - &sensor_dev_attr_temp3_input.dev_attr.attr, - &sensor_dev_attr_temp4_input.dev_attr.attr, - &sensor_dev_attr_temp5_input.dev_attr.attr, - &sensor_dev_attr_temp6_input.dev_attr.attr, - &sensor_dev_attr_temp7_input.dev_attr.attr, - &sensor_dev_attr_temp8_input.dev_attr.attr, - &sensor_dev_attr_temp9_input.dev_attr.attr, - NULL -}; - -static const struct attribute_group nct7904_tcpu_group = { - .attrs = nct7904_tcpu_attrs, - .is_visible = nct7904_tcpu_is_visible, -}; - -/* PWM ATTR */ -static ssize_t store_pwm(struct device *dev, struct device_attribute *devattr, - const char *buf, size_t count) +static int nct7904_read_pwm(struct device *dev, u32 attr, int channel, + long *val) { - int index = to_sensor_dev_attr(devattr)->index; struct nct7904_data *data = dev_get_drvdata(dev); - unsigned long val; int ret; - if (kstrtoul(buf, 10, &val) < 0) - return -EINVAL; - if (val > 255) - return -EINVAL; + switch(attr) { + case hwmon_pwm_input: + ret = nct7904_read_reg(data, BANK_3, FANCTL1_OUT_REG + channel); + if (ret < 0) + return ret; + *val = ret; + return 0; + case hwmon_pwm_enable: + ret = nct7904_read_reg(data, BANK_3, FANCTL1_FMR_REG + channel); + if (ret < 0) + return ret; - ret = nct7904_write_reg(data, BANK_3, FANCTL1_OUT_REG + index, val); - - return ret ? ret : count; + *val = ret ? 2 : 1; + return 0; + default: + return -EOPNOTSUPP; + } } -static ssize_t show_pwm(struct device *dev, - struct device_attribute *devattr, char *buf) +static int nct7904_write_pwm(struct device *dev, u32 attr, int channel, + long val) { - int index = to_sensor_dev_attr(devattr)->index; struct nct7904_data *data = dev_get_drvdata(dev); - int val; - - val = nct7904_read_reg(data, BANK_3, FANCTL1_OUT_REG + index); - if (val < 0) - return val; - - return sprintf(buf, "%d\n", val); -} - -static ssize_t store_enable(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) -{ - int index = to_sensor_dev_attr(devattr)->index; - struct nct7904_data *data = dev_get_drvdata(dev); - unsigned long val; int ret; - if (kstrtoul(buf, 10, &val) < 0) - return -EINVAL; - if (val < 1 || val > 2 || (val == 2 && !data->fan_mode[index])) - return -EINVAL; - - ret = nct7904_write_reg(data, BANK_3, FANCTL1_FMR_REG + index, - val == 2 ? data->fan_mode[index] : 0); - - return ret ? ret : count; + switch(attr) { + case hwmon_pwm_input: + if (val < 0 || val > 255) + return -EINVAL; + ret = nct7904_write_reg(data, BANK_3, FANCTL1_OUT_REG + channel, + val); + return ret; + case hwmon_pwm_enable: + if (val < 1 || val > 2 || + (val == 2 && !data->fan_mode[channel])) + return -EINVAL; + ret = nct7904_write_reg(data, BANK_3, FANCTL1_FMR_REG + channel, + val == 2 ? data->fan_mode[channel] : 0); + return ret; + default: + return -EOPNOTSUPP; + } } -/* Return 1 for manual mode or 2 for SmartFan mode */ -static ssize_t show_enable(struct device *dev, - struct device_attribute *devattr, char *buf) +static umode_t nct7904_pwm_is_visible(const void *_data, u32 attr, int channel) { - int index = to_sensor_dev_attr(devattr)->index; - struct nct7904_data *data = dev_get_drvdata(dev); - int val; - - val = nct7904_read_reg(data, BANK_3, FANCTL1_FMR_REG + index); - if (val < 0) - return val; - - return sprintf(buf, "%d\n", val ? 2 : 1); + switch(attr) { + case hwmon_pwm_input: + case hwmon_pwm_enable: + return S_IRUGO | S_IWUSR; + default: + return 0; + } } -/* 2 attributes per channel: pwm and mode */ -static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, - show_pwm, store_pwm, 0); -static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, - show_enable, store_enable, 0); -static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, - show_pwm, store_pwm, 1); -static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR, - show_enable, store_enable, 1); -static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, - show_pwm, store_pwm, 2); -static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR, - show_enable, store_enable, 2); -static SENSOR_DEVICE_ATTR(pwm4, S_IRUGO | S_IWUSR, - show_pwm, store_pwm, 3); -static SENSOR_DEVICE_ATTR(pwm4_enable, S_IRUGO | S_IWUSR, - show_enable, store_enable, 3); +static int nct7904_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + switch (type) { + case hwmon_in: + return nct7904_read_in(dev, attr, channel, val); + case hwmon_fan: + return nct7904_read_fan(dev, attr, channel, val); + case hwmon_pwm: + return nct7904_read_pwm(dev, attr, channel, val); + case hwmon_temp: + return nct7904_read_temp(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } +} -static struct attribute *nct7904_fanctl_attrs[] = { - &sensor_dev_attr_pwm1.dev_attr.attr, - &sensor_dev_attr_pwm1_enable.dev_attr.attr, - &sensor_dev_attr_pwm2.dev_attr.attr, - &sensor_dev_attr_pwm2_enable.dev_attr.attr, - &sensor_dev_attr_pwm3.dev_attr.attr, - &sensor_dev_attr_pwm3_enable.dev_attr.attr, - &sensor_dev_attr_pwm4.dev_attr.attr, - &sensor_dev_attr_pwm4_enable.dev_attr.attr, - NULL -}; +static int nct7904_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + switch (type) { + case hwmon_pwm: + return nct7904_write_pwm(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } +} -static const struct attribute_group nct7904_fanctl_group = { - .attrs = nct7904_fanctl_attrs, -}; - -static const struct attribute_group *nct7904_groups[] = { - &nct7904_fanin_group, - &nct7904_vsen_group, - &nct7904_tcpu_group, - &nct7904_fanctl_group, - NULL -}; +static umode_t nct7904_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_in: + return nct7904_in_is_visible(data, attr, channel); + case hwmon_fan: + return nct7904_fan_is_visible(data, attr, channel); + case hwmon_pwm: + return nct7904_pwm_is_visible(data, attr, channel); + case hwmon_temp: + return nct7904_temp_is_visible(data, attr, channel); + default: + return 0; + } +} /* Return 0 if detection is successful, -ENODEV otherwise */ static int nct7904_detect(struct i2c_client *client, @@ -512,6 +400,103 @@ static int nct7904_detect(struct i2c_client *client, return 0; } +static const u32 nct7904_in_config[] = { + HWMON_I_INPUT, /* dummy, skipped in is_visible */ + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT, + 0 +}; + +static const struct hwmon_channel_info nct7904_in = { + .type = hwmon_in, + .config = nct7904_in_config, +}; + +static const u32 nct7904_fan_config[] = { + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + HWMON_F_INPUT, + 0 +}; + +static const struct hwmon_channel_info nct7904_fan = { + .type = hwmon_fan, + .config = nct7904_fan_config, +}; + +static const u32 nct7904_pwm_config[] = { + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + 0 +}; + +static const struct hwmon_channel_info nct7904_pwm = { + .type = hwmon_pwm, + .config = nct7904_pwm_config, +}; + +static const u32 nct7904_temp_config[] = { + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT, + 0 +}; + +static const struct hwmon_channel_info nct7904_temp = { + .type = hwmon_temp, + .config = nct7904_temp_config, +}; + +static const struct hwmon_channel_info *nct7904_info[] = { + &nct7904_in, + &nct7904_fan, + &nct7904_pwm, + &nct7904_temp, + NULL +}; + +static const struct hwmon_ops nct7904_hwmon_ops = { + .is_visible = nct7904_is_visible, + .read = nct7904_read, + .write = nct7904_write, +}; + +static const struct hwmon_chip_info nct7904_chip_info = { + .ops = &nct7904_hwmon_ops, + .info = nct7904_info, +}; + static int nct7904_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -566,8 +551,8 @@ static int nct7904_probe(struct i2c_client *client, } hwmon_dev = - devm_hwmon_device_register_with_groups(dev, client->name, data, - nct7904_groups); + devm_hwmon_device_register_with_info(dev, client->name, data, + &nct7904_chip_info, NULL); return PTR_ERR_OR_ZERO(hwmon_dev); } diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index 8ef7b713cb1a..c52d07c6b49f 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -253,12 +253,9 @@ static const struct ntc_compensation b57330v2103[] = { }; struct ntc_data { - struct device *hwmon_dev; struct ntc_thermistor_platform_data *pdata; const struct ntc_compensation *comp; - struct device *dev; int n_comp; - char name[PLATFORM_NAME_SIZE]; }; #if defined(CONFIG_OF) && IS_ENABLED(CONFIG_IIO) @@ -316,22 +313,22 @@ static const struct of_device_id ntc_match[] = { MODULE_DEVICE_TABLE(of, ntc_match); static struct ntc_thermistor_platform_data * -ntc_thermistor_parse_dt(struct platform_device *pdev) +ntc_thermistor_parse_dt(struct device *dev) { struct iio_channel *chan; enum iio_chan_type type; - struct device_node *np = pdev->dev.of_node; + struct device_node *np = dev->of_node; struct ntc_thermistor_platform_data *pdata; int ret; if (!np) return NULL; - pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) return ERR_PTR(-ENOMEM); - chan = iio_channel_get(&pdev->dev, NULL); + chan = devm_iio_channel_get(dev, NULL); if (IS_ERR(chan)) return ERR_CAST(chan); @@ -359,22 +356,15 @@ ntc_thermistor_parse_dt(struct platform_device *pdev) return pdata; } -static void ntc_iio_channel_release(struct ntc_thermistor_platform_data *pdata) -{ - if (pdata->chan) - iio_channel_release(pdata->chan); -} #else static struct ntc_thermistor_platform_data * -ntc_thermistor_parse_dt(struct platform_device *pdev) +ntc_thermistor_parse_dt(struct device *dev) { return NULL; } #define ntc_match NULL -static void ntc_iio_channel_release(struct ntc_thermistor_platform_data *pdata) -{ } #endif static inline u64 div64_u64_safe(u64 dividend, u64 divisor) @@ -516,9 +506,8 @@ static int ntc_thermistor_get_ohm(struct ntc_data *data) return -EINVAL; } -static int ntc_read_temp(void *dev, int *temp) +static int ntc_read_temp(void *data, int *temp) { - struct ntc_data *data = dev_get_drvdata(dev); int ohm; ohm = ntc_thermistor_get_ohm(data); @@ -530,14 +519,6 @@ static int ntc_read_temp(void *dev, int *temp) return 0; } -static ssize_t ntc_show_name(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct ntc_data *data = dev_get_drvdata(dev); - - return sprintf(buf, "%s\n", data->name); -} - static ssize_t ntc_show_type(struct device *dev, struct device_attribute *attr, char *buf) { @@ -559,18 +540,13 @@ static ssize_t ntc_show_temp(struct device *dev, static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO, ntc_show_type, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ntc_show_temp, NULL, 0); -static DEVICE_ATTR(name, S_IRUGO, ntc_show_name, NULL); -static struct attribute *ntc_attributes[] = { - &dev_attr_name.attr, +static struct attribute *ntc_attrs[] = { &sensor_dev_attr_temp1_type.dev_attr.attr, &sensor_dev_attr_temp1_input.dev_attr.attr, NULL, }; - -static const struct attribute_group ntc_attr_group = { - .attrs = ntc_attributes, -}; +ATTRIBUTE_GROUPS(ntc); static const struct thermal_zone_of_device_ops ntc_of_thermal_ops = { .get_temp = ntc_read_temp, @@ -579,33 +555,34 @@ static const struct thermal_zone_of_device_ops ntc_of_thermal_ops = { static int ntc_thermistor_probe(struct platform_device *pdev) { struct thermal_zone_device *tz; + struct device *dev = &pdev->dev; const struct of_device_id *of_id = - of_match_device(of_match_ptr(ntc_match), &pdev->dev); + of_match_device(of_match_ptr(ntc_match), dev); const struct platform_device_id *pdev_id; struct ntc_thermistor_platform_data *pdata; + struct device *hwmon_dev; struct ntc_data *data; - int ret; - pdata = ntc_thermistor_parse_dt(pdev); + pdata = ntc_thermistor_parse_dt(dev); if (IS_ERR(pdata)) return PTR_ERR(pdata); else if (pdata == NULL) - pdata = dev_get_platdata(&pdev->dev); + pdata = dev_get_platdata(dev); if (!pdata) { - dev_err(&pdev->dev, "No platform init data supplied.\n"); + dev_err(dev, "No platform init data supplied.\n"); return -ENODEV; } /* Either one of the two is required. */ if (!pdata->read_uv && !pdata->read_ohm) { - dev_err(&pdev->dev, + dev_err(dev, "Both read_uv and read_ohm missing. Need either one of the two.\n"); return -EINVAL; } if (pdata->read_uv && pdata->read_ohm) { - dev_warn(&pdev->dev, + dev_warn(dev, "Only one of read_uv and read_ohm is needed; ignoring read_uv.\n"); pdata->read_uv = NULL; } @@ -617,20 +594,17 @@ static int ntc_thermistor_probe(struct platform_device *pdev) NTC_CONNECTED_POSITIVE) || (pdata->connect != NTC_CONNECTED_POSITIVE && pdata->connect != NTC_CONNECTED_GROUND))) { - dev_err(&pdev->dev, - "Required data to use read_uv not supplied.\n"); + dev_err(dev, "Required data to use read_uv not supplied.\n"); return -EINVAL; } - data = devm_kzalloc(&pdev->dev, sizeof(struct ntc_data), GFP_KERNEL); + data = devm_kzalloc(dev, sizeof(struct ntc_data), GFP_KERNEL); if (!data) return -ENOMEM; pdev_id = of_id ? of_id->data : platform_get_device_id(pdev); - data->dev = &pdev->dev; data->pdata = pdata; - strlcpy(data->name, pdev_id->name, sizeof(data->name)); switch (pdev_id->driver_data) { case TYPE_NCPXXWB473: @@ -654,49 +628,25 @@ static int ntc_thermistor_probe(struct platform_device *pdev) data->n_comp = ARRAY_SIZE(ncpXXxh103); break; default: - dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n", + dev_err(dev, "Unknown device type: %lu(%s)\n", pdev_id->driver_data, pdev_id->name); return -EINVAL; } - platform_set_drvdata(pdev, data); - - ret = sysfs_create_group(&data->dev->kobj, &ntc_attr_group); - if (ret) { - dev_err(data->dev, "unable to create sysfs files\n"); - return ret; + hwmon_dev = devm_hwmon_device_register_with_groups(dev, pdev_id->name, + data, ntc_groups); + if (IS_ERR(hwmon_dev)) { + dev_err(dev, "unable to register as hwmon device.\n"); + return PTR_ERR(hwmon_dev); } - data->hwmon_dev = hwmon_device_register(data->dev); - if (IS_ERR(data->hwmon_dev)) { - dev_err(data->dev, "unable to register as hwmon device.\n"); - ret = PTR_ERR(data->hwmon_dev); - goto err_after_sysfs; - } + dev_info(dev, "Thermistor type: %s successfully probed.\n", + pdev_id->name); - dev_info(&pdev->dev, "Thermistor type: %s successfully probed.\n", - pdev_id->name); - - tz = devm_thermal_zone_of_sensor_register(data->dev, 0, data->dev, + tz = devm_thermal_zone_of_sensor_register(dev, 0, data, &ntc_of_thermal_ops); if (IS_ERR(tz)) - dev_dbg(&pdev->dev, "Failed to register to thermal fw.\n"); - - return 0; -err_after_sysfs: - sysfs_remove_group(&data->dev->kobj, &ntc_attr_group); - ntc_iio_channel_release(pdata); - return ret; -} - -static int ntc_thermistor_remove(struct platform_device *pdev) -{ - struct ntc_data *data = platform_get_drvdata(pdev); - struct ntc_thermistor_platform_data *pdata = data->pdata; - - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&data->dev->kobj, &ntc_attr_group); - ntc_iio_channel_release(pdata); + dev_dbg(dev, "Failed to register to thermal fw.\n"); return 0; } @@ -707,7 +657,6 @@ static struct platform_driver ntc_thermistor_driver = { .of_match_table = of_match_ptr(ntc_match), }, .probe = ntc_thermistor_probe, - .remove = ntc_thermistor_remove, .id_table = ntc_thermistor_id, }; diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 054d3d863802..cad1229b7e17 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -126,12 +126,12 @@ config SENSORS_TPS40422 be called tps40422. config SENSORS_UCD9000 - tristate "TI UCD90120, UCD90124, UCD9090, UCD90910" + tristate "TI UCD90120, UCD90124, UCD90160, UCD9090, UCD90910" default n help If you say yes here you get hardware monitoring support for TI - UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health - Controllers. + UCD90120, UCD90124, UCD90160, UCD9090, UCD90910, Sequencer and System + Health Controllers. This driver can also be built as a module. If so, the module will be called ucd9000. diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c index 0a74991a60f0..44ca8a94873d 100644 --- a/drivers/hwmon/pmbus/pmbus.c +++ b/drivers/hwmon/pmbus/pmbus.c @@ -25,6 +25,7 @@ #include #include #include +#include #include "pmbus.h" /* @@ -167,14 +168,26 @@ static int pmbus_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct pmbus_driver_info *info; + struct pmbus_platform_data *pdata = NULL; + struct device *dev = &client->dev; - info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info), - GFP_KERNEL); + info = devm_kzalloc(dev, sizeof(struct pmbus_driver_info), GFP_KERNEL); if (!info) return -ENOMEM; + if (!strcmp(id->name, "dps460") || !strcmp(id->name, "dps800") || + !strcmp(id->name, "sgd009")) { + pdata = devm_kzalloc(dev, sizeof(struct pmbus_platform_data), + GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdata->flags = PMBUS_SKIP_STATUS_CHECK; + } + info->pages = id->driver_data; info->identify = pmbus_identify; + dev->platform_data = pdata; return pmbus_do_probe(client, id, info); } @@ -186,6 +199,8 @@ static const struct i2c_device_id pmbus_id[] = { {"adp4000", 1}, {"bmr453", 1}, {"bmr454", 1}, + {"dps460", 1}, + {"dps800", 1}, {"mdt040", 1}, {"ncp4200", 1}, {"ncp4208", 1}, @@ -193,6 +208,7 @@ static const struct i2c_device_id pmbus_id[] = { {"pdt006", 1}, {"pdt012", 1}, {"pmbus", 0}, + {"sgd009", 1}, {"tps40400", 1}, {"tps544b20", 1}, {"tps544b25", 1}, diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c index fbb1479d3ad4..3e3aa950277f 100644 --- a/drivers/hwmon/pmbus/ucd9000.c +++ b/drivers/hwmon/pmbus/ucd9000.c @@ -28,7 +28,7 @@ #include #include "pmbus.h" -enum chips { ucd9000, ucd90120, ucd90124, ucd9090, ucd90910 }; +enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 }; #define UCD9000_MONITOR_CONFIG 0xd5 #define UCD9000_NUM_PAGES 0xd6 @@ -112,6 +112,7 @@ static const struct i2c_device_id ucd9000_id[] = { {"ucd9000", ucd9000}, {"ucd90120", ucd90120}, {"ucd90124", ucd90124}, + {"ucd90160", ucd90160}, {"ucd9090", ucd9090}, {"ucd90910", ucd90910}, {} diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c index 25b44e68926d..559a3dcd64d8 100644 --- a/drivers/hwmon/scpi-hwmon.c +++ b/drivers/hwmon/scpi-hwmon.c @@ -255,7 +255,6 @@ static const struct of_device_id scpi_of_match[] = { static struct platform_driver scpi_hwmon_platdrv = { .driver = { .name = "scpi-hwmon", - .owner = THIS_MODULE, .of_match_table = scpi_of_match, }, .probe = scpi_hwmon_probe, diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c index 8479ac5eb853..36bba2a816a4 100644 --- a/drivers/hwmon/tmp102.c +++ b/drivers/hwmon/tmp102.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #define DRIVER_NAME "tmp102" @@ -79,84 +78,113 @@ static inline u16 tmp102_mC_to_reg(int val) return (val * 128) / 1000; } -static int tmp102_read_temp(void *dev, int *temp) +static int tmp102_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *temp) { struct tmp102 *tmp102 = dev_get_drvdata(dev); - unsigned int reg; - int ret; + unsigned int regval; + int err, reg; - if (time_before(jiffies, tmp102->ready_time)) { - dev_dbg(dev, "%s: Conversion not ready yet..\n", __func__); - return -EAGAIN; + switch (attr) { + case hwmon_temp_input: + /* Is it too early to return a conversion ? */ + if (time_before(jiffies, tmp102->ready_time)) { + dev_dbg(dev, "%s: Conversion not ready yet..\n", __func__); + return -EAGAIN; + } + reg = TMP102_TEMP_REG; + break; + case hwmon_temp_max_hyst: + reg = TMP102_TLOW_REG; + break; + case hwmon_temp_max: + reg = TMP102_THIGH_REG; + break; + default: + return -EOPNOTSUPP; } - ret = regmap_read(tmp102->regmap, TMP102_TEMP_REG, ®); - if (ret < 0) - return ret; - - *temp = tmp102_reg_to_mC(reg); + err = regmap_read(tmp102->regmap, reg, ®val); + if (err < 0) + return err; + *temp = tmp102_reg_to_mC(regval); return 0; } -static ssize_t tmp102_show_temp(struct device *dev, - struct device_attribute *attr, - char *buf) +static int tmp102_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long temp) { - struct sensor_device_attribute *sda = to_sensor_dev_attr(attr); struct tmp102 *tmp102 = dev_get_drvdata(dev); - int regaddr = sda->index; - unsigned int reg; - int err; + int reg; - if (regaddr == TMP102_TEMP_REG && - time_before(jiffies, tmp102->ready_time)) - return -EAGAIN; + switch (attr) { + case hwmon_temp_max_hyst: + reg = TMP102_TLOW_REG; + break; + case hwmon_temp_max: + reg = TMP102_THIGH_REG; + break; + default: + return -EOPNOTSUPP; + } - err = regmap_read(tmp102->regmap, regaddr, ®); - if (err < 0) - return err; - - return sprintf(buf, "%d\n", tmp102_reg_to_mC(reg)); + temp = clamp_val(temp, -256000, 255000); + return regmap_write(tmp102->regmap, reg, tmp102_mC_to_reg(temp)); } -static ssize_t tmp102_set_temp(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static umode_t tmp102_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) { - struct sensor_device_attribute *sda = to_sensor_dev_attr(attr); - struct tmp102 *tmp102 = dev_get_drvdata(dev); - int reg = sda->index; - long val; - int err; + if (type != hwmon_temp) + return 0; - if (kstrtol(buf, 10, &val) < 0) - return -EINVAL; - val = clamp_val(val, -256000, 255000); - - err = regmap_write(tmp102->regmap, reg, tmp102_mC_to_reg(val)); - return err ? : count; + switch (attr) { + case hwmon_temp_input: + return S_IRUGO; + case hwmon_temp_max_hyst: + case hwmon_temp_max: + return S_IRUGO | S_IWUSR; + default: + return 0; + } } -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, tmp102_show_temp, NULL, - TMP102_TEMP_REG); +static u32 tmp102_chip_config[] = { + HWMON_C_REGISTER_TZ, + 0 +}; -static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, tmp102_show_temp, - tmp102_set_temp, TMP102_TLOW_REG); +static const struct hwmon_channel_info tmp102_chip = { + .type = hwmon_chip, + .config = tmp102_chip_config, +}; -static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, tmp102_show_temp, - tmp102_set_temp, TMP102_THIGH_REG); +static u32 tmp102_temp_config[] = { + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST, + 0 +}; -static struct attribute *tmp102_attrs[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, +static const struct hwmon_channel_info tmp102_temp = { + .type = hwmon_temp, + .config = tmp102_temp_config, +}; + +static const struct hwmon_channel_info *tmp102_info[] = { + &tmp102_chip, + &tmp102_temp, NULL }; -ATTRIBUTE_GROUPS(tmp102); -static const struct thermal_zone_of_device_ops tmp102_of_thermal_ops = { - .get_temp = tmp102_read_temp, +static const struct hwmon_ops tmp102_hwmon_ops = { + .is_visible = tmp102_is_visible, + .read = tmp102_read, + .write = tmp102_write, +}; + +static const struct hwmon_chip_info tmp102_chip_info = { + .ops = &tmp102_hwmon_ops, + .info = tmp102_info, }; static void tmp102_restore_config(void *data) @@ -188,7 +216,7 @@ static const struct regmap_config tmp102_regmap_config = { }; static int tmp102_probe(struct i2c_client *client, - const struct i2c_device_id *id) + const struct i2c_device_id *id) { struct device *dev = &client->dev; struct device *hwmon_dev; @@ -249,16 +277,14 @@ static int tmp102_probe(struct i2c_client *client, tmp102->ready_time += msecs_to_jiffies(CONVERSION_TIME_MS); } - hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, - tmp102, - tmp102_groups); + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, + tmp102, + &tmp102_chip_info, + NULL); if (IS_ERR(hwmon_dev)) { dev_dbg(dev, "unable to register hwmon device\n"); return PTR_ERR(hwmon_dev); } - devm_thermal_zone_of_sensor_register(hwmon_dev, 0, hwmon_dev, - &tmp102_of_thermal_ops); - dev_info(dev, "initialized\n"); return 0; diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index 85d48d80822a..bfb98b96c781 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -72,6 +72,10 @@ MODULE_DEVICE_TABLE(i2c, tmp421_id); struct tmp421_data { struct i2c_client *client; struct mutex update_lock; + u32 temp_config[5]; + struct hwmon_channel_info temp_info; + const struct hwmon_channel_info *info[2]; + struct hwmon_chip_info chip; char valid; unsigned long last_updated; int channels; @@ -125,85 +129,46 @@ static struct tmp421_data *tmp421_update_device(struct device *dev) return data; } -static ssize_t show_temp_value(struct device *dev, - struct device_attribute *devattr, char *buf) +static int tmp421_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) { - int index = to_sensor_dev_attr(devattr)->index; - struct tmp421_data *data = tmp421_update_device(dev); - int temp; + struct tmp421_data *tmp421 = tmp421_update_device(dev); - mutex_lock(&data->update_lock); - if (data->config & TMP421_CONFIG_RANGE) - temp = temp_from_u16(data->temp[index]); - else - temp = temp_from_s16(data->temp[index]); - mutex_unlock(&data->update_lock); + switch (attr) { + case hwmon_temp_input: + if (tmp421->config & TMP421_CONFIG_RANGE) + *val = temp_from_u16(tmp421->temp[channel]); + else + *val = temp_from_s16(tmp421->temp[channel]); + return 0; + case hwmon_temp_fault: + /* + * The OPEN bit signals a fault. This is bit 0 of the temperature + * register (low byte). + */ + *val = tmp421->temp[channel] & 0x01; + return 0; + default: + return -EOPNOTSUPP; + } - return sprintf(buf, "%d\n", temp); } -static ssize_t show_fault(struct device *dev, - struct device_attribute *devattr, char *buf) +static umode_t tmp421_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) { - int index = to_sensor_dev_attr(devattr)->index; - struct tmp421_data *data = tmp421_update_device(dev); - - /* - * The OPEN bit signals a fault. This is bit 0 of the temperature - * register (low byte). - */ - if (data->temp[index] & 0x01) - return sprintf(buf, "1\n"); - else - return sprintf(buf, "0\n"); + switch (attr) { + case hwmon_temp_fault: + if (channel == 0) + return 0; + return S_IRUGO; + case hwmon_temp_input: + return S_IRUGO; + default: + return 0; + } } -static umode_t tmp421_is_visible(struct kobject *kobj, struct attribute *a, - int n) -{ - struct device *dev = container_of(kobj, struct device, kobj); - struct tmp421_data *data = dev_get_drvdata(dev); - struct device_attribute *devattr; - unsigned int index; - - devattr = container_of(a, struct device_attribute, attr); - index = to_sensor_dev_attr(devattr)->index; - - if (index < data->channels) - return a->mode; - - return 0; -} - -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_value, NULL, 0); -static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_value, NULL, 1); -static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_fault, NULL, 1); -static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp_value, NULL, 2); -static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_fault, NULL, 2); -static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp_value, NULL, 3); -static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_fault, NULL, 3); - -static struct attribute *tmp421_attr[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp2_input.dev_attr.attr, - &sensor_dev_attr_temp2_fault.dev_attr.attr, - &sensor_dev_attr_temp3_input.dev_attr.attr, - &sensor_dev_attr_temp3_fault.dev_attr.attr, - &sensor_dev_attr_temp4_input.dev_attr.attr, - &sensor_dev_attr_temp4_fault.dev_attr.attr, - NULL -}; - -static const struct attribute_group tmp421_group = { - .attrs = tmp421_attr, - .is_visible = tmp421_is_visible, -}; - -static const struct attribute_group *tmp421_groups[] = { - &tmp421_group, - NULL -}; - static int tmp421_init_client(struct i2c_client *client) { int config, config_orig; @@ -289,13 +254,18 @@ static int tmp421_detect(struct i2c_client *client, return 0; } +static const struct hwmon_ops tmp421_ops = { + .is_visible = tmp421_is_visible, + .read = tmp421_read, +}; + static int tmp421_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device *dev = &client->dev; struct device *hwmon_dev; struct tmp421_data *data; - int err; + int i, err; data = devm_kzalloc(dev, sizeof(struct tmp421_data), GFP_KERNEL); if (!data) @@ -309,8 +279,21 @@ static int tmp421_probe(struct i2c_client *client, if (err) return err; - hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, - data, tmp421_groups); + for (i = 0; i < data->channels; i++) + data->temp_config[i] = HWMON_T_INPUT | HWMON_T_FAULT; + + data->chip.ops = &tmp421_ops; + data->chip.info = data->info; + + data->info[0] = &data->temp_info; + + data->temp_info.type = hwmon_temp; + data->temp_info.config = data->temp_config; + + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, + data, + &data->chip, + NULL); return PTR_ERR_OR_ZERO(hwmon_dev); } diff --git a/drivers/hwmon/xgene-hwmon.c b/drivers/hwmon/xgene-hwmon.c new file mode 100644 index 000000000000..9c0dbb8191ad --- /dev/null +++ b/drivers/hwmon/xgene-hwmon.c @@ -0,0 +1,787 @@ +/* + * APM X-Gene SoC Hardware Monitoring Driver + * + * Copyright (c) 2016, Applied Micro Circuits Corporation + * Author: Loc Ho + * Hoan Tran + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + * + * This driver provides the following features: + * - Retrieve CPU total power (uW) + * - Retrieve IO total power (uW) + * - Retrieve SoC temperature (milli-degree C) and alarm + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* SLIMpro message defines */ +#define MSG_TYPE_DBG 0 +#define MSG_TYPE_ERR 7 +#define MSG_TYPE_PWRMGMT 9 + +#define MSG_TYPE(v) (((v) & 0xF0000000) >> 28) +#define MSG_TYPE_SET(v) (((v) << 28) & 0xF0000000) +#define MSG_SUBTYPE(v) (((v) & 0x0F000000) >> 24) +#define MSG_SUBTYPE_SET(v) (((v) << 24) & 0x0F000000) + +#define DBG_SUBTYPE_SENSOR_READ 4 +#define SENSOR_RD_MSG 0x04FFE902 +#define SENSOR_RD_EN_ADDR(a) ((a) & 0x000FFFFF) +#define PMD_PWR_REG 0x20 +#define PMD_PWR_MW_REG 0x26 +#define SOC_PWR_REG 0x21 +#define SOC_PWR_MW_REG 0x27 +#define SOC_TEMP_REG 0x10 + +#define TEMP_NEGATIVE_BIT 8 +#define SENSOR_INVALID_DATA BIT(15) + +#define PWRMGMT_SUBTYPE_TPC 1 +#define TPC_ALARM 2 +#define TPC_GET_ALARM 3 +#define TPC_CMD(v) (((v) & 0x00FF0000) >> 16) +#define TPC_CMD_SET(v) (((v) << 16) & 0x00FF0000) +#define TPC_EN_MSG(hndl, cmd, type) \ + (MSG_TYPE_SET(MSG_TYPE_PWRMGMT) | \ + MSG_SUBTYPE_SET(hndl) | TPC_CMD_SET(cmd) | type) + +/* PCC defines */ +#define PCC_SIGNATURE_MASK 0x50424300 +#define PCCC_GENERATE_DB_INT BIT(15) +#define PCCS_CMD_COMPLETE BIT(0) +#define PCCS_SCI_DOORBEL BIT(1) +#define PCCS_PLATFORM_NOTIFICATION BIT(3) +/* + * Arbitrary retries in case the remote processor is slow to respond + * to PCC commands + */ +#define PCC_NUM_RETRIES 500 + +#define ASYNC_MSG_FIFO_SIZE 16 +#define MBOX_OP_TIMEOUTMS 1000 + +#define WATT_TO_mWATT(x) ((x) * 1000) +#define mWATT_TO_uWATT(x) ((x) * 1000) +#define CELSIUS_TO_mCELSIUS(x) ((x) * 1000) + +#define to_xgene_hwmon_dev(cl) \ + container_of(cl, struct xgene_hwmon_dev, mbox_client) + +struct slimpro_resp_msg { + u32 msg; + u32 param1; + u32 param2; +} __packed; + +struct xgene_hwmon_dev { + struct device *dev; + struct mbox_chan *mbox_chan; + struct mbox_client mbox_client; + int mbox_idx; + + spinlock_t kfifo_lock; + struct mutex rd_mutex; + struct completion rd_complete; + int resp_pending; + struct slimpro_resp_msg sync_msg; + + struct work_struct workq; + struct kfifo_rec_ptr_1 async_msg_fifo; + + struct device *hwmon_dev; + bool temp_critical_alarm; + + phys_addr_t comm_base_addr; + void *pcc_comm_addr; + u64 usecs_lat; +}; + +/* + * This function tests and clears a bitmask then returns its old value + */ +static u16 xgene_word_tst_and_clr(u16 *addr, u16 mask) +{ + u16 ret, val; + + val = le16_to_cpu(READ_ONCE(*addr)); + ret = val & mask; + val &= ~mask; + WRITE_ONCE(*addr, cpu_to_le16(val)); + + return ret; +} + +static int xgene_hwmon_pcc_rd(struct xgene_hwmon_dev *ctx, u32 *msg) +{ + struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr; + u32 *ptr = (void *)(generic_comm_base + 1); + int rc, i; + u16 val; + + mutex_lock(&ctx->rd_mutex); + init_completion(&ctx->rd_complete); + ctx->resp_pending = true; + + /* Write signature for subspace */ + WRITE_ONCE(generic_comm_base->signature, + cpu_to_le32(PCC_SIGNATURE_MASK | ctx->mbox_idx)); + + /* Write to the shared command region */ + WRITE_ONCE(generic_comm_base->command, + cpu_to_le16(MSG_TYPE(msg[0]) | PCCC_GENERATE_DB_INT)); + + /* Flip CMD COMPLETE bit */ + val = le16_to_cpu(READ_ONCE(generic_comm_base->status)); + val &= ~PCCS_CMD_COMPLETE; + WRITE_ONCE(generic_comm_base->status, cpu_to_le16(val)); + + /* Copy the message to the PCC comm space */ + for (i = 0; i < sizeof(struct slimpro_resp_msg) / 4; i++) + WRITE_ONCE(ptr[i], cpu_to_le32(msg[i])); + + /* Ring the doorbell */ + rc = mbox_send_message(ctx->mbox_chan, msg); + if (rc < 0) { + dev_err(ctx->dev, "Mailbox send error %d\n", rc); + goto err; + } + if (!wait_for_completion_timeout(&ctx->rd_complete, + usecs_to_jiffies(ctx->usecs_lat))) { + dev_err(ctx->dev, "Mailbox operation timed out\n"); + rc = -ETIMEDOUT; + goto err; + } + + /* Check for error message */ + if (MSG_TYPE(ctx->sync_msg.msg) == MSG_TYPE_ERR) { + rc = -EINVAL; + goto err; + } + + msg[0] = ctx->sync_msg.msg; + msg[1] = ctx->sync_msg.param1; + msg[2] = ctx->sync_msg.param2; + +err: + mbox_chan_txdone(ctx->mbox_chan, 0); + ctx->resp_pending = false; + mutex_unlock(&ctx->rd_mutex); + return rc; +} + +static int xgene_hwmon_rd(struct xgene_hwmon_dev *ctx, u32 *msg) +{ + int rc; + + mutex_lock(&ctx->rd_mutex); + init_completion(&ctx->rd_complete); + ctx->resp_pending = true; + + rc = mbox_send_message(ctx->mbox_chan, msg); + if (rc < 0) { + dev_err(ctx->dev, "Mailbox send error %d\n", rc); + goto err; + } + + if (!wait_for_completion_timeout(&ctx->rd_complete, + msecs_to_jiffies(MBOX_OP_TIMEOUTMS))) { + dev_err(ctx->dev, "Mailbox operation timed out\n"); + rc = -ETIMEDOUT; + goto err; + } + + /* Check for error message */ + if (MSG_TYPE(ctx->sync_msg.msg) == MSG_TYPE_ERR) { + rc = -EINVAL; + goto err; + } + + msg[0] = ctx->sync_msg.msg; + msg[1] = ctx->sync_msg.param1; + msg[2] = ctx->sync_msg.param2; + +err: + ctx->resp_pending = false; + mutex_unlock(&ctx->rd_mutex); + return rc; +} + +static int xgene_hwmon_reg_map_rd(struct xgene_hwmon_dev *ctx, u32 addr, + u32 *data) +{ + u32 msg[3]; + int rc; + + msg[0] = SENSOR_RD_MSG; + msg[1] = SENSOR_RD_EN_ADDR(addr); + msg[2] = 0; + + if (acpi_disabled) + rc = xgene_hwmon_rd(ctx, msg); + else + rc = xgene_hwmon_pcc_rd(ctx, msg); + + if (rc < 0) + return rc; + + /* + * Check if sensor data is valid. + */ + if (msg[1] & SENSOR_INVALID_DATA) + return -ENODATA; + + *data = msg[1]; + + return rc; +} + +static int xgene_hwmon_get_notification_msg(struct xgene_hwmon_dev *ctx, + u32 *amsg) +{ + u32 msg[3]; + int rc; + + msg[0] = TPC_EN_MSG(PWRMGMT_SUBTYPE_TPC, TPC_GET_ALARM, 0); + msg[1] = 0; + msg[2] = 0; + + rc = xgene_hwmon_pcc_rd(ctx, msg); + if (rc < 0) + return rc; + + amsg[0] = msg[0]; + amsg[1] = msg[1]; + amsg[2] = msg[2]; + + return rc; +} + +static int xgene_hwmon_get_cpu_pwr(struct xgene_hwmon_dev *ctx, u32 *val) +{ + u32 watt, mwatt; + int rc; + + rc = xgene_hwmon_reg_map_rd(ctx, PMD_PWR_REG, &watt); + if (rc < 0) + return rc; + + rc = xgene_hwmon_reg_map_rd(ctx, PMD_PWR_MW_REG, &mwatt); + if (rc < 0) + return rc; + + *val = WATT_TO_mWATT(watt) + mwatt; + return 0; +} + +static int xgene_hwmon_get_io_pwr(struct xgene_hwmon_dev *ctx, u32 *val) +{ + u32 watt, mwatt; + int rc; + + rc = xgene_hwmon_reg_map_rd(ctx, SOC_PWR_REG, &watt); + if (rc < 0) + return rc; + + rc = xgene_hwmon_reg_map_rd(ctx, SOC_PWR_MW_REG, &mwatt); + if (rc < 0) + return rc; + + *val = WATT_TO_mWATT(watt) + mwatt; + return 0; +} + +static int xgene_hwmon_get_temp(struct xgene_hwmon_dev *ctx, u32 *val) +{ + return xgene_hwmon_reg_map_rd(ctx, SOC_TEMP_REG, val); +} + +/* + * Sensor temperature/power functions + */ +static ssize_t temp1_input_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct xgene_hwmon_dev *ctx = dev_get_drvdata(dev); + int rc, temp; + u32 val; + + rc = xgene_hwmon_get_temp(ctx, &val); + if (rc < 0) + return rc; + + temp = sign_extend32(val, TEMP_NEGATIVE_BIT); + + return snprintf(buf, PAGE_SIZE, "%d\n", CELSIUS_TO_mCELSIUS(temp)); +} + +static ssize_t temp1_label_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "SoC Temperature\n"); +} + +static ssize_t temp1_critical_alarm_show(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct xgene_hwmon_dev *ctx = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%d\n", ctx->temp_critical_alarm); +} + +static ssize_t power1_label_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "CPU power\n"); +} + +static ssize_t power2_label_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "IO power\n"); +} + +static ssize_t power1_input_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct xgene_hwmon_dev *ctx = dev_get_drvdata(dev); + u32 val; + int rc; + + rc = xgene_hwmon_get_cpu_pwr(ctx, &val); + if (rc < 0) + return rc; + + return snprintf(buf, PAGE_SIZE, "%u\n", mWATT_TO_uWATT(val)); +} + +static ssize_t power2_input_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct xgene_hwmon_dev *ctx = dev_get_drvdata(dev); + u32 val; + int rc; + + rc = xgene_hwmon_get_io_pwr(ctx, &val); + if (rc < 0) + return rc; + + return snprintf(buf, PAGE_SIZE, "%u\n", mWATT_TO_uWATT(val)); +} + +static DEVICE_ATTR_RO(temp1_label); +static DEVICE_ATTR_RO(temp1_input); +static DEVICE_ATTR_RO(temp1_critical_alarm); +static DEVICE_ATTR_RO(power1_label); +static DEVICE_ATTR_RO(power1_input); +static DEVICE_ATTR_RO(power2_label); +static DEVICE_ATTR_RO(power2_input); + +static struct attribute *xgene_hwmon_attrs[] = { + &dev_attr_temp1_label.attr, + &dev_attr_temp1_input.attr, + &dev_attr_temp1_critical_alarm.attr, + &dev_attr_power1_label.attr, + &dev_attr_power1_input.attr, + &dev_attr_power2_label.attr, + &dev_attr_power2_input.attr, + NULL, +}; + +ATTRIBUTE_GROUPS(xgene_hwmon); + +static int xgene_hwmon_tpc_alarm(struct xgene_hwmon_dev *ctx, + struct slimpro_resp_msg *amsg) +{ + ctx->temp_critical_alarm = !!amsg->param2; + sysfs_notify(&ctx->dev->kobj, NULL, "temp1_critical_alarm"); + + return 0; +} + +static void xgene_hwmon_process_pwrmsg(struct xgene_hwmon_dev *ctx, + struct slimpro_resp_msg *amsg) +{ + if ((MSG_SUBTYPE(amsg->msg) == PWRMGMT_SUBTYPE_TPC) && + (TPC_CMD(amsg->msg) == TPC_ALARM)) + xgene_hwmon_tpc_alarm(ctx, amsg); +} + +/* + * This function is called to process async work queue + */ +static void xgene_hwmon_evt_work(struct work_struct *work) +{ + struct slimpro_resp_msg amsg; + struct xgene_hwmon_dev *ctx; + int ret; + + ctx = container_of(work, struct xgene_hwmon_dev, workq); + while (kfifo_out_spinlocked(&ctx->async_msg_fifo, &amsg, + sizeof(struct slimpro_resp_msg), + &ctx->kfifo_lock)) { + /* + * If PCC, send a consumer command to Platform to get info + * If Slimpro Mailbox, get message from specific FIFO + */ + if (!acpi_disabled) { + ret = xgene_hwmon_get_notification_msg(ctx, + (u32 *)&amsg); + if (ret < 0) + continue; + } + + if (MSG_TYPE(amsg.msg) == MSG_TYPE_PWRMGMT) + xgene_hwmon_process_pwrmsg(ctx, &amsg); + } +} + +static int xgene_hwmon_rx_ready(struct xgene_hwmon_dev *ctx, void *msg) +{ + if (IS_ERR_OR_NULL(ctx->hwmon_dev) && !ctx->resp_pending) { + /* Enqueue to the FIFO */ + kfifo_in_spinlocked(&ctx->async_msg_fifo, msg, + sizeof(struct slimpro_resp_msg), + &ctx->kfifo_lock); + return -ENODEV; + } + + return 0; +} + +/* + * This function is called when the SLIMpro Mailbox received a message + */ +static void xgene_hwmon_rx_cb(struct mbox_client *cl, void *msg) +{ + struct xgene_hwmon_dev *ctx = to_xgene_hwmon_dev(cl); + + /* + * While the driver registers with the mailbox framework, an interrupt + * can be pending before the probe function completes its + * initialization. If such condition occurs, just queue up the message + * as the driver is not ready for servicing the callback. + */ + if (xgene_hwmon_rx_ready(ctx, msg) < 0) + return; + + /* + * Response message format: + * msg[0] is the return code of the operation + * msg[1] is the first parameter word + * msg[2] is the second parameter word + * + * As message only supports dword size, just assign it. + */ + + /* Check for sync query */ + if (ctx->resp_pending && + ((MSG_TYPE(((u32 *)msg)[0]) == MSG_TYPE_ERR) || + (MSG_TYPE(((u32 *)msg)[0]) == MSG_TYPE_DBG && + MSG_SUBTYPE(((u32 *)msg)[0]) == DBG_SUBTYPE_SENSOR_READ) || + (MSG_TYPE(((u32 *)msg)[0]) == MSG_TYPE_PWRMGMT && + MSG_SUBTYPE(((u32 *)msg)[0]) == PWRMGMT_SUBTYPE_TPC && + TPC_CMD(((u32 *)msg)[0]) == TPC_ALARM))) { + ctx->sync_msg.msg = ((u32 *)msg)[0]; + ctx->sync_msg.param1 = ((u32 *)msg)[1]; + ctx->sync_msg.param2 = ((u32 *)msg)[2]; + + /* Operation waiting for response */ + complete(&ctx->rd_complete); + + return; + } + + /* Enqueue to the FIFO */ + kfifo_in_spinlocked(&ctx->async_msg_fifo, msg, + sizeof(struct slimpro_resp_msg), &ctx->kfifo_lock); + /* Schedule the bottom handler */ + schedule_work(&ctx->workq); +} + +/* + * This function is called when the PCC Mailbox received a message + */ +static void xgene_hwmon_pcc_rx_cb(struct mbox_client *cl, void *msg) +{ + struct xgene_hwmon_dev *ctx = to_xgene_hwmon_dev(cl); + struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr; + struct slimpro_resp_msg amsg; + + /* + * While the driver registers with the mailbox framework, an interrupt + * can be pending before the probe function completes its + * initialization. If such condition occurs, just queue up the message + * as the driver is not ready for servicing the callback. + */ + if (xgene_hwmon_rx_ready(ctx, &amsg) < 0) + return; + + msg = generic_comm_base + 1; + /* Check if platform sends interrupt */ + if (!xgene_word_tst_and_clr(&generic_comm_base->status, + PCCS_SCI_DOORBEL)) + return; + + /* + * Response message format: + * msg[0] is the return code of the operation + * msg[1] is the first parameter word + * msg[2] is the second parameter word + * + * As message only supports dword size, just assign it. + */ + + /* Check for sync query */ + if (ctx->resp_pending && + ((MSG_TYPE(((u32 *)msg)[0]) == MSG_TYPE_ERR) || + (MSG_TYPE(((u32 *)msg)[0]) == MSG_TYPE_DBG && + MSG_SUBTYPE(((u32 *)msg)[0]) == DBG_SUBTYPE_SENSOR_READ) || + (MSG_TYPE(((u32 *)msg)[0]) == MSG_TYPE_PWRMGMT && + MSG_SUBTYPE(((u32 *)msg)[0]) == PWRMGMT_SUBTYPE_TPC && + TPC_CMD(((u32 *)msg)[0]) == TPC_ALARM))) { + /* Check if platform completes command */ + if (xgene_word_tst_and_clr(&generic_comm_base->status, + PCCS_CMD_COMPLETE)) { + ctx->sync_msg.msg = ((u32 *)msg)[0]; + ctx->sync_msg.param1 = ((u32 *)msg)[1]; + ctx->sync_msg.param2 = ((u32 *)msg)[2]; + + /* Operation waiting for response */ + complete(&ctx->rd_complete); + + return; + } + } + + /* + * Platform notifies interrupt to OSPM. + * OPSM schedules a consumer command to get this information + * in a workqueue. Platform must wait until OSPM has issued + * a consumer command that serves this notification. + */ + + /* Enqueue to the FIFO */ + kfifo_in_spinlocked(&ctx->async_msg_fifo, &amsg, + sizeof(struct slimpro_resp_msg), &ctx->kfifo_lock); + /* Schedule the bottom handler */ + schedule_work(&ctx->workq); +} + +static void xgene_hwmon_tx_done(struct mbox_client *cl, void *msg, int ret) +{ + if (ret) { + dev_dbg(cl->dev, "TX did not complete: CMD sent:%x, ret:%d\n", + *(u16 *)msg, ret); + } else { + dev_dbg(cl->dev, "TX completed. CMD sent:%x, ret:%d\n", + *(u16 *)msg, ret); + } +} + +static int xgene_hwmon_probe(struct platform_device *pdev) +{ + struct xgene_hwmon_dev *ctx; + struct mbox_client *cl; + int rc; + + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->dev = &pdev->dev; + platform_set_drvdata(pdev, ctx); + cl = &ctx->mbox_client; + + spin_lock_init(&ctx->kfifo_lock); + mutex_init(&ctx->rd_mutex); + + rc = kfifo_alloc(&ctx->async_msg_fifo, + sizeof(struct slimpro_resp_msg) * ASYNC_MSG_FIFO_SIZE, + GFP_KERNEL); + if (rc) + goto out_mbox_free; + + INIT_WORK(&ctx->workq, xgene_hwmon_evt_work); + + /* Request mailbox channel */ + cl->dev = &pdev->dev; + cl->tx_done = xgene_hwmon_tx_done; + cl->tx_block = false; + cl->tx_tout = MBOX_OP_TIMEOUTMS; + cl->knows_txdone = false; + if (acpi_disabled) { + cl->rx_callback = xgene_hwmon_rx_cb; + ctx->mbox_chan = mbox_request_channel(cl, 0); + if (IS_ERR(ctx->mbox_chan)) { + dev_err(&pdev->dev, + "SLIMpro mailbox channel request failed\n"); + return -ENODEV; + } + } else { + struct acpi_pcct_hw_reduced *cppc_ss; + + if (device_property_read_u32(&pdev->dev, "pcc-channel", + &ctx->mbox_idx)) { + dev_err(&pdev->dev, "no pcc-channel property\n"); + return -ENODEV; + } + + cl->rx_callback = xgene_hwmon_pcc_rx_cb; + ctx->mbox_chan = pcc_mbox_request_channel(cl, ctx->mbox_idx); + if (IS_ERR(ctx->mbox_chan)) { + dev_err(&pdev->dev, + "PPC channel request failed\n"); + return -ENODEV; + } + + /* + * The PCC mailbox controller driver should + * have parsed the PCCT (global table of all + * PCC channels) and stored pointers to the + * subspace communication region in con_priv. + */ + cppc_ss = ctx->mbox_chan->con_priv; + if (!cppc_ss) { + dev_err(&pdev->dev, "PPC subspace not found\n"); + rc = -ENODEV; + goto out_mbox_free; + } + + if (!ctx->mbox_chan->mbox->txdone_irq) { + dev_err(&pdev->dev, "PCC IRQ not supported\n"); + rc = -ENODEV; + goto out_mbox_free; + } + + /* + * This is the shared communication region + * for the OS and Platform to communicate over. + */ + ctx->comm_base_addr = cppc_ss->base_address; + if (ctx->comm_base_addr) { + ctx->pcc_comm_addr = memremap(ctx->comm_base_addr, + cppc_ss->length, + MEMREMAP_WB); + } else { + dev_err(&pdev->dev, "Failed to get PCC comm region\n"); + rc = -ENODEV; + goto out_mbox_free; + } + + if (!ctx->pcc_comm_addr) { + dev_err(&pdev->dev, + "Failed to ioremap PCC comm region\n"); + rc = -ENOMEM; + goto out_mbox_free; + } + + /* + * cppc_ss->latency is just a Nominal value. In reality + * the remote processor could be much slower to reply. + * So add an arbitrary amount of wait on top of Nominal. + */ + ctx->usecs_lat = PCC_NUM_RETRIES * cppc_ss->latency; + } + + ctx->hwmon_dev = hwmon_device_register_with_groups(ctx->dev, + "apm_xgene", + ctx, + xgene_hwmon_groups); + if (IS_ERR(ctx->hwmon_dev)) { + dev_err(&pdev->dev, "Failed to register HW monitor device\n"); + rc = PTR_ERR(ctx->hwmon_dev); + goto out; + } + + /* + * Schedule the bottom handler if there is a pending message. + */ + schedule_work(&ctx->workq); + + dev_info(&pdev->dev, "APM X-Gene SoC HW monitor driver registered\n"); + + return 0; + +out: + if (acpi_disabled) + mbox_free_channel(ctx->mbox_chan); + else + pcc_mbox_free_channel(ctx->mbox_chan); +out_mbox_free: + kfifo_free(&ctx->async_msg_fifo); + + return rc; +} + +static int xgene_hwmon_remove(struct platform_device *pdev) +{ + struct xgene_hwmon_dev *ctx = platform_get_drvdata(pdev); + + hwmon_device_unregister(ctx->hwmon_dev); + kfifo_free(&ctx->async_msg_fifo); + if (acpi_disabled) + mbox_free_channel(ctx->mbox_chan); + else + pcc_mbox_free_channel(ctx->mbox_chan); + + return 0; +} + +#ifdef CONFIG_ACPI +static const struct acpi_device_id xgene_hwmon_acpi_match[] = { + {"APMC0D29", 0}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, xgene_hwmon_acpi_match); +#endif + +static const struct of_device_id xgene_hwmon_of_match[] = { + {.compatible = "apm,xgene-slimpro-hwmon"}, + {} +}; +MODULE_DEVICE_TABLE(of, xgene_hwmon_of_match); + +static struct platform_driver xgene_hwmon_driver __refdata = { + .probe = xgene_hwmon_probe, + .remove = xgene_hwmon_remove, + .driver = { + .name = "xgene-slimpro-hwmon", + .of_match_table = xgene_hwmon_of_match, + .acpi_match_table = ACPI_PTR(xgene_hwmon_acpi_match), + }, +}; +module_platform_driver(xgene_hwmon_driver); + +MODULE_DESCRIPTION("APM X-Gene SoC hardware monitor"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/hwmon.h b/include/linux/hwmon.h index 09354f6c1d63..9d2f8bde7d12 100644 --- a/include/linux/hwmon.h +++ b/include/linux/hwmon.h @@ -14,9 +14,341 @@ #ifndef _HWMON_H_ #define _HWMON_H_ +#include + struct device; struct attribute_group; +enum hwmon_sensor_types { + hwmon_chip, + hwmon_temp, + hwmon_in, + hwmon_curr, + hwmon_power, + hwmon_energy, + hwmon_humidity, + hwmon_fan, + hwmon_pwm, +}; + +enum hwmon_chip_attributes { + hwmon_chip_temp_reset_history, + hwmon_chip_in_reset_history, + hwmon_chip_curr_reset_history, + hwmon_chip_power_reset_history, + hwmon_chip_register_tz, + hwmon_chip_update_interval, + hwmon_chip_alarms, +}; + +#define HWMON_C_TEMP_RESET_HISTORY BIT(hwmon_chip_temp_reset_history) +#define HWMON_C_IN_RESET_HISTORY BIT(hwmon_chip_in_reset_history) +#define HWMON_C_CURR_RESET_HISTORY BIT(hwmon_chip_curr_reset_history) +#define HWMON_C_POWER_RESET_HISTORY BIT(hwmon_chip_power_reset_history) +#define HWMON_C_REGISTER_TZ BIT(hwmon_chip_register_tz) +#define HWMON_C_UPDATE_INTERVAL BIT(hwmon_chip_update_interval) +#define HWMON_C_ALARMS BIT(hwmon_chip_alarms) + +enum hwmon_temp_attributes { + hwmon_temp_input = 0, + hwmon_temp_type, + hwmon_temp_lcrit, + hwmon_temp_lcrit_hyst, + hwmon_temp_min, + hwmon_temp_min_hyst, + hwmon_temp_max, + hwmon_temp_max_hyst, + hwmon_temp_crit, + hwmon_temp_crit_hyst, + hwmon_temp_emergency, + hwmon_temp_emergency_hyst, + hwmon_temp_alarm, + hwmon_temp_lcrit_alarm, + hwmon_temp_min_alarm, + hwmon_temp_max_alarm, + hwmon_temp_crit_alarm, + hwmon_temp_emergency_alarm, + hwmon_temp_fault, + hwmon_temp_offset, + hwmon_temp_label, + hwmon_temp_lowest, + hwmon_temp_highest, + hwmon_temp_reset_history, +}; + +#define HWMON_T_INPUT BIT(hwmon_temp_input) +#define HWMON_T_TYPE BIT(hwmon_temp_type) +#define HWMON_T_LCRIT BIT(hwmon_temp_lcrit) +#define HWMON_T_LCRIT_HYST BIT(hwmon_temp_lcrit_hyst) +#define HWMON_T_MIN BIT(hwmon_temp_min) +#define HWMON_T_MIN_HYST BIT(hwmon_temp_min_hyst) +#define HWMON_T_MAX BIT(hwmon_temp_max) +#define HWMON_T_MAX_HYST BIT(hwmon_temp_max_hyst) +#define HWMON_T_CRIT BIT(hwmon_temp_crit) +#define HWMON_T_CRIT_HYST BIT(hwmon_temp_crit_hyst) +#define HWMON_T_EMERGENCY BIT(hwmon_temp_emergency) +#define HWMON_T_EMERGENCY_HYST BIT(hwmon_temp_emergency_hyst) +#define HWMON_T_MIN_ALARM BIT(hwmon_temp_min_alarm) +#define HWMON_T_MAX_ALARM BIT(hwmon_temp_max_alarm) +#define HWMON_T_CRIT_ALARM BIT(hwmon_temp_crit_alarm) +#define HWMON_T_EMERGENCY_ALARM BIT(hwmon_temp_emergency_alarm) +#define HWMON_T_FAULT BIT(hwmon_temp_fault) +#define HWMON_T_OFFSET BIT(hwmon_temp_offset) +#define HWMON_T_LABEL BIT(hwmon_temp_label) +#define HWMON_T_LOWEST BIT(hwmon_temp_lowest) +#define HWMON_T_HIGHEST BIT(hwmon_temp_highest) +#define HWMON_T_RESET_HISTORY BIT(hwmon_temp_reset_history) + +enum hwmon_in_attributes { + hwmon_in_input, + hwmon_in_min, + hwmon_in_max, + hwmon_in_lcrit, + hwmon_in_crit, + hwmon_in_average, + hwmon_in_lowest, + hwmon_in_highest, + hwmon_in_reset_history, + hwmon_in_label, + hwmon_in_alarm, + hwmon_in_min_alarm, + hwmon_in_max_alarm, + hwmon_in_lcrit_alarm, + hwmon_in_crit_alarm, +}; + +#define HWMON_I_INPUT BIT(hwmon_in_input) +#define HWMON_I_MIN BIT(hwmon_in_min) +#define HWMON_I_MAX BIT(hwmon_in_max) +#define HWMON_I_LCRIT BIT(hwmon_in_lcrit) +#define HWMON_I_CRIT BIT(hwmon_in_crit) +#define HWMON_I_AVERAGE BIT(hwmon_in_average) +#define HWMON_I_LOWEST BIT(hwmon_in_lowest) +#define HWMON_I_HIGHEST BIT(hwmon_in_highest) +#define HWMON_I_RESET_HISTORY BIT(hwmon_in_reset_history) +#define HWMON_I_LABEL BIT(hwmon_in_label) +#define HWMON_I_ALARM BIT(hwmon_in_alarm) +#define HWMON_I_MIN_ALARM BIT(hwmon_in_min_alarm) +#define HWMON_I_MAX_ALARM BIT(hwmon_in_max_alarm) +#define HWMON_I_LCRIT_ALARM BIT(hwmon_in_lcrit_alarm) +#define HWMON_I_CRIT_ALARM BIT(hwmon_in_crit_alarm) + +enum hwmon_curr_attributes { + hwmon_curr_input, + hwmon_curr_min, + hwmon_curr_max, + hwmon_curr_lcrit, + hwmon_curr_crit, + hwmon_curr_average, + hwmon_curr_lowest, + hwmon_curr_highest, + hwmon_curr_reset_history, + hwmon_curr_label, + hwmon_curr_alarm, + hwmon_curr_min_alarm, + hwmon_curr_max_alarm, + hwmon_curr_lcrit_alarm, + hwmon_curr_crit_alarm, +}; + +#define HWMON_C_INPUT BIT(hwmon_curr_input) +#define HWMON_C_MIN BIT(hwmon_curr_min) +#define HWMON_C_MAX BIT(hwmon_curr_max) +#define HWMON_C_LCRIT BIT(hwmon_curr_lcrit) +#define HWMON_C_CRIT BIT(hwmon_curr_crit) +#define HWMON_C_AVERAGE BIT(hwmon_curr_average) +#define HWMON_C_LOWEST BIT(hwmon_curr_lowest) +#define HWMON_C_HIGHEST BIT(hwmon_curr_highest) +#define HWMON_C_RESET_HISTORY BIT(hwmon_curr_reset_history) +#define HWMON_C_LABEL BIT(hwmon_curr_label) +#define HWMON_C_ALARM BIT(hwmon_curr_alarm) +#define HWMON_C_MIN_ALARM BIT(hwmon_curr_min_alarm) +#define HWMON_C_MAX_ALARM BIT(hwmon_curr_max_alarm) +#define HWMON_C_LCRIT_ALARM BIT(hwmon_curr_lcrit_alarm) +#define HWMON_C_CRIT_ALARM BIT(hwmon_curr_crit_alarm) + +enum hwmon_power_attributes { + hwmon_power_average, + hwmon_power_average_interval, + hwmon_power_average_interval_max, + hwmon_power_average_interval_min, + hwmon_power_average_highest, + hwmon_power_average_lowest, + hwmon_power_average_max, + hwmon_power_average_min, + hwmon_power_input, + hwmon_power_input_highest, + hwmon_power_input_lowest, + hwmon_power_reset_history, + hwmon_power_accuracy, + hwmon_power_cap, + hwmon_power_cap_hyst, + hwmon_power_cap_max, + hwmon_power_cap_min, + hwmon_power_max, + hwmon_power_crit, + hwmon_power_label, + hwmon_power_alarm, + hwmon_power_cap_alarm, + hwmon_power_max_alarm, + hwmon_power_crit_alarm, +}; + +#define HWMON_P_AVERAGE BIT(hwmon_power_average) +#define HWMON_P_AVERAGE_INTERVAL BIT(hwmon_power_average_interval) +#define HWMON_P_AVERAGE_INTERVAL_MAX BIT(hwmon_power_average_interval_max) +#define HWMON_P_AVERAGE_INTERVAL_MIN BIT(hwmon_power_average_interval_min) +#define HWMON_P_AVERAGE_HIGHEST BIT(hwmon_power_average_highest) +#define HWMON_P_AVERAGE_LOWEST BIT(hwmon_power_average_lowest) +#define HWMON_P_AVERAGE_MAX BIT(hwmon_power_average_max) +#define HWMON_P_AVERAGE_MIN BIT(hwmon_power_average_min) +#define HWMON_P_INPUT BIT(hwmon_power_input) +#define HWMON_P_INPUT_HIGHEST BIT(hwmon_power_input_highest) +#define HWMON_P_INPUT_LOWEST BIT(hwmon_power_input_lowest) +#define HWMON_P_RESET_HISTORY BIT(hwmon_power_reset_history) +#define HWMON_P_ACCURACY BIT(hwmon_power_accuracy) +#define HWMON_P_CAP BIT(hwmon_power_cap) +#define HWMON_P_CAP_HYST BIT(hwmon_power_cap_hyst) +#define HWMON_P_CAP_MAX BIT(hwmon_power_cap_max) +#define HWMON_P_CAP_MIN BIT(hwmon_power_cap_min) +#define HWMON_P_MAX BIT(hwmon_power_max) +#define HWMON_P_CRIT BIT(hwmon_power_crit) +#define HWMON_P_LABEL BIT(hwmon_power_label) +#define HWMON_P_ALARM BIT(hwmon_power_alarm) +#define HWMON_P_CAP_ALARM BIT(hwmon_power_cap_alarm) +#define HWMON_P_MAX_ALARM BIT(hwmon_power_max_alarm) +#define HWMON_P_CRIT_ALARM BIT(hwmon_power_crit_alarm) + +enum hwmon_energy_attributes { + hwmon_energy_input, + hwmon_energy_label, +}; + +#define HWMON_E_INPUT BIT(hwmon_energy_input) +#define HWMON_E_LABEL BIT(hwmon_energy_label) + +enum hwmon_humidity_attributes { + hwmon_humidity_input, + hwmon_humidity_label, + hwmon_humidity_min, + hwmon_humidity_min_hyst, + hwmon_humidity_max, + hwmon_humidity_max_hyst, + hwmon_humidity_alarm, + hwmon_humidity_fault, +}; + +#define HWMON_H_INPUT BIT(hwmon_humidity_input) +#define HWMON_H_LABEL BIT(hwmon_humidity_label) +#define HWMON_H_MIN BIT(hwmon_humidity_min) +#define HWMON_H_MIN_HYST BIT(hwmon_humidity_min_hyst) +#define HWMON_H_MAX BIT(hwmon_humidity_max) +#define HWMON_H_MAX_HYST BIT(hwmon_humidity_max_hyst) +#define HWMON_H_ALARM BIT(hwmon_humidity_alarm) +#define HWMON_H_FAULT BIT(hwmon_humidity_fault) + +enum hwmon_fan_attributes { + hwmon_fan_input, + hwmon_fan_label, + hwmon_fan_min, + hwmon_fan_max, + hwmon_fan_div, + hwmon_fan_pulses, + hwmon_fan_target, + hwmon_fan_alarm, + hwmon_fan_min_alarm, + hwmon_fan_max_alarm, + hwmon_fan_fault, +}; + +#define HWMON_F_INPUT BIT(hwmon_fan_input) +#define HWMON_F_LABEL BIT(hwmon_fan_label) +#define HWMON_F_MIN BIT(hwmon_fan_min) +#define HWMON_F_MAX BIT(hwmon_fan_max) +#define HWMON_F_DIV BIT(hwmon_fan_div) +#define HWMON_F_PULSES BIT(hwmon_fan_pulses) +#define HWMON_F_TARGET BIT(hwmon_fan_target) +#define HWMON_F_ALARM BIT(hwmon_fan_alarm) +#define HWMON_F_MIN_ALARM BIT(hwmon_fan_min_alarm) +#define HWMON_F_MAX_ALARM BIT(hwmon_fan_max_alarm) +#define HWMON_F_FAULT BIT(hwmon_fan_fault) + +enum hwmon_pwm_attributes { + hwmon_pwm_input, + hwmon_pwm_enable, + hwmon_pwm_mode, + hwmon_pwm_freq, +}; + +#define HWMON_PWM_INPUT BIT(hwmon_pwm_input) +#define HWMON_PWM_ENABLE BIT(hwmon_pwm_enable) +#define HWMON_PWM_MODE BIT(hwmon_pwm_mode) +#define HWMON_PWM_FREQ BIT(hwmon_pwm_freq) + +/** + * struct hwmon_ops - hwmon device operations + * @is_visible: Callback to return attribute visibility. Mandatory. + * Parameters are: + * @const void *drvdata: + * Pointer to driver-private data structure passed + * as argument to hwmon_device_register_with_info(). + * @type: Sensor type + * @attr: Sensor attribute + * @channel: + * Channel number + * The function returns the file permissions. + * If the return value is 0, no attribute will be created. + * @read: Read callback. Optional. If not provided, attributes + * will not be readable. + * Parameters are: + * @dev: Pointer to hardware monitoring device + * @type: Sensor type + * @attr: Sensor attribute + * @channel: + * Channel number + * @val: Pointer to returned value + * The function returns 0 on success or a negative error number. + * @write: Write callback. Optional. If not provided, attributes + * will not be writable. + * Parameters are: + * @dev: Pointer to hardware monitoring device + * @type: Sensor type + * @attr: Sensor attribute + * @channel: + * Channel number + * @val: Value to write + * The function returns 0 on success or a negative error number. + */ +struct hwmon_ops { + umode_t (*is_visible)(const void *drvdata, enum hwmon_sensor_types type, + u32 attr, int channel); + int (*read)(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val); + int (*write)(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val); +}; + +/** + * Channel information + * @type: Channel type. + * @config: Pointer to NULL-terminated list of channel parameters. + * Use for per-channel attributes. + */ +struct hwmon_channel_info { + enum hwmon_sensor_types type; + const u32 *config; +}; + +/** + * Chip configuration + * @ops: Pointer to hwmon operations. + * @info: Null-terminated list of channel information. + */ +struct hwmon_chip_info { + const struct hwmon_ops *ops; + const struct hwmon_channel_info **info; +}; + struct device *hwmon_device_register(struct device *dev); struct device * hwmon_device_register_with_groups(struct device *dev, const char *name, @@ -26,6 +358,16 @@ struct device * devm_hwmon_device_register_with_groups(struct device *dev, const char *name, void *drvdata, const struct attribute_group **groups); +struct device * +hwmon_device_register_with_info(struct device *dev, + const char *name, void *drvdata, + const struct hwmon_chip_info *info, + const struct attribute_group **groups); +struct device * +devm_hwmon_device_register_with_info(struct device *dev, + const char *name, void *drvdata, + const struct hwmon_chip_info *info, + const struct attribute_group **groups); void hwmon_device_unregister(struct device *dev); void devm_hwmon_device_unregister(struct device *dev);