From a8135fcfd0431eda3653c7069e7aefc8674fdfbe Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Sun, 15 Jul 2007 20:12:23 +0100 Subject: [PATCH 01/60] [ARM] 4476/1: EM7210/SS4000E support This patch adds the basic support for the em7210 board. It is similar to the iq31244 board and can be found on Intel "Baxter Creek" ss4000e nas. Signed-off-by: Arnaud Patard Signed-off-by: Russell King --- arch/arm/mach-iop32x/Kconfig | 7 + arch/arm/mach-iop32x/Makefile | 1 + arch/arm/mach-iop32x/em7210.c | 202 +++++++++++++++++++++++ arch/arm/mach-iop32x/irq.c | 3 +- include/asm-arm/arch-iop32x/uncompress.h | 2 +- 5 files changed, 213 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-iop32x/em7210.c diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig index 9bb02b6d7ae1..dbe07c9472ed 100644 --- a/arch/arm/mach-iop32x/Kconfig +++ b/arch/arm/mach-iop32x/Kconfig @@ -42,6 +42,13 @@ config IOP3XX_ATU Say N if the IOP is an add in card, the host system owns the PCI bus in this case. +config MACH_EM7210 + bool "Enable support for the Lanner EM7210" + help + Say Y here if you want to run your kernel on the Lanner EM7210 + board. Say also Y here if you have a SS4000e Baxter Creek NAS + appliance." + endmenu endif diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile index 7b05b37e1f94..cfdf8a137c2b 100644 --- a/arch/arm/mach-iop32x/Makefile +++ b/arch/arm/mach-iop32x/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_MACH_GLANTANK) += glantank.o obj-$(CONFIG_ARCH_IQ80321) += iq80321.o obj-$(CONFIG_ARCH_IQ31244) += iq31244.o obj-$(CONFIG_MACH_N2100) += n2100.o +obj-$(CONFIG_MACH_EM7210) += em7210.o diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c new file mode 100644 index 000000000000..f0362053fdcc --- /dev/null +++ b/arch/arm/mach-iop32x/em7210.c @@ -0,0 +1,202 @@ +/* + * arch/arm/mach-iop32x/em7210.c + * + * Board support code for the Lanner EM7210 platforms. + * + * Based on arch/arm/mach-iop32x/iq31244.c file. + * + * Copyright (C) 2007 Arnaud Patard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void __init em7210_timer_init(void) +{ + /* http://www.kwaak.net/fotos/fotos-nas/slide_24.html */ + /* 33.333 MHz crystal. */ + iop_init_time(200000000); +} + +static struct sys_timer em7210_timer = { + .init = em7210_timer_init, + .offset = iop_gettimeoffset, +}; + + +/* + * EM7210 I/O + */ +static struct map_desc em7210_io_desc[] __initdata = { + { /* on-board devices */ + .virtual = IQ31244_UART, + .pfn = __phys_to_pfn(IQ31244_UART), + .length = 0x00100000, + .type = MT_DEVICE, + }, +}; + +void __init em7210_map_io(void) +{ + iop3xx_map_io(); + iotable_init(em7210_io_desc, ARRAY_SIZE(em7210_io_desc)); +} + + +/* + * EM7210 PCI + */ +#define INTA IRQ_IOP32X_XINT0 +#define INTB IRQ_IOP32X_XINT1 +#define INTC IRQ_IOP32X_XINT2 +#define INTD IRQ_IOP32X_XINT3 + +static int __init +em7210_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[][4] = { + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + {INTB, INTB, INTB, INTB}, /* console / uart */ + {INTA, INTA, INTA, INTA}, /* 1st 82541 */ + {INTD, INTD, INTD, INTD}, /* 2nd 82541 */ + {INTC, INTC, INTC, INTC}, /* GD31244 */ + {INTD, INTA, INTA, INTA}, /* mini-PCI */ + {INTD, INTC, INTA, INTA}, /* NEC USB */ + }; + + if (pin < 1 || pin > 4) + return -1; + + return pci_irq_table[slot % 6][pin - 1]; +} + +static struct hw_pci em7210_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iop3xx_pci_setup, + .preinit = iop3xx_pci_preinit, + .scan = iop3xx_pci_scan_bus, + .map_irq = em7210_pci_map_irq, +}; + +static int __init em7210_pci_init(void) +{ + if (machine_is_em7210()) + pci_common_init(&em7210_pci); + + return 0; +} + +subsys_initcall(em7210_pci_init); + + +/* + * EM7210 Flash + */ +static struct physmap_flash_data em7210_flash_data = { + .width = 2, +}; + +static struct resource em7210_flash_resource = { + .start = 0xf0000000, + .end = 0xf1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device em7210_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &em7210_flash_data, + }, + .num_resources = 1, + .resource = &em7210_flash_resource, +}; + + +/* + * EM7210 UART + * The physical address of the serial port is 0xfe800000, + * so it can be used for physical and virtual address. + */ +static struct plat_serial8250_port em7210_serial_port[] = { + { + .mapbase = IQ31244_UART, + .membase = (char *)IQ31244_UART, + .irq = IRQ_IOP32X_XINT1, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = 1843200, + }, + { }, +}; + +static struct resource em7210_uart_resource = { + .start = IQ31244_UART, + .end = IQ31244_UART + 7, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device em7210_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = em7210_serial_port, + }, + .num_resources = 1, + .resource = &em7210_uart_resource, +}; + +void em7210_power_off(void) +{ + *IOP3XX_GPOE &= 0xfe; + *IOP3XX_GPOD |= 0x01; +} + +static void __init em7210_init_machine(void) +{ + platform_device_register(&em7210_serial_device); + platform_device_register(&iop3xx_i2c0_device); + platform_device_register(&iop3xx_i2c1_device); + platform_device_register(&em7210_flash_device); + platform_device_register(&iop3xx_dma_0_channel); + platform_device_register(&iop3xx_dma_1_channel); + + + pm_power_off = em7210_power_off; +} + +MACHINE_START(EM7210, "Lanner EM7210") + .phys_io = IQ31244_UART, + .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = em7210_map_io, + .init_irq = iop32x_init_irq, + .timer = &em7210_timer, + .init_machine = em7210_init_machine, +MACHINE_END diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c index c971171c2905..55cf0162e8c1 100644 --- a/arch/arm/mach-iop32x/irq.c +++ b/arch/arm/mach-iop32x/irq.c @@ -63,7 +63,8 @@ void __init iop32x_init_irq(void) if (machine_is_glantank() || machine_is_iq80321() || machine_is_iq31244() || - machine_is_n2100()) + machine_is_n2100() || + machine_is_em7210()) *IOP3XX_PCIIRSR = 0x0f; for (i = 0; i < NR_IRQS; i++) { diff --git a/include/asm-arm/arch-iop32x/uncompress.h b/include/asm-arm/arch-iop32x/uncompress.h index e64f52bf2bce..070f15818fe7 100644 --- a/include/asm-arm/arch-iop32x/uncompress.h +++ b/include/asm-arm/arch-iop32x/uncompress.h @@ -26,7 +26,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) { if (machine_is_iq80321()) uart_base = (volatile u8 *)IQ80321_UART; - else if (machine_is_iq31244()) + else if (machine_is_iq31244() || machine_is_em7210()) uart_base = (volatile u8 *)IQ31244_UART; else uart_base = (volatile u8 *)0xfe800000; From 7dea1b20066cd30fb54da7e686b16b5e38b46b2d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 20 Jul 2007 02:07:31 +0100 Subject: [PATCH 02/60] [ARM] 4494/1: iop13xx: fix up elf_hwcap compile breakage arch/arm/boot/compressed/misc.o: In function `valid_user_regs': misc.c:(.text+0x74): undefined reference to `elf_hwcap' This triggers after the various elf_hwcap cleanups in: f884b1cf578e079f01682514ae1ae64c74586602 d1cbbd6b413510c6512f4f80ffd48db1a8dd554a include/asm-arm/arch-iop13xx/uncompress.h calls cpu_relax while spinning on a register value. cpu_relax requires processor.h->ptrace.h->hwcap.h 'elf_hwcap' is defined as an extern, but since the uncompressor does not link against arch/arm/kernel/setup.c 'elf_hwcap' remains undefined. Fix is to open code the cpu_relax() call as barrier(). Cc: Lennert Buytenhek Cc: Catalin Marinas Signed-off-by: Dan Williams Signed-off-by: Russell King --- include/asm-arm/arch-iop13xx/uncompress.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/asm-arm/arch-iop13xx/uncompress.h b/include/asm-arm/arch-iop13xx/uncompress.h index b9525d59b7ad..dd9c2934190e 100644 --- a/include/asm-arm/arch-iop13xx/uncompress.h +++ b/include/asm-arm/arch-iop13xx/uncompress.h @@ -1,7 +1,6 @@ #include #include #include -#include #define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS) #define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) @@ -9,7 +8,7 @@ static inline void putc(char c) { while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE) - cpu_relax(); + barrier(); UART_BASE[UART_TX] = c; } From 70c14ff0e9f5e1f5456587b827620e636ba70a09 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 20 Jul 2007 02:07:26 +0100 Subject: [PATCH 03/60] [ARM] 4495/1: iop: combined watchdog timer driver for iop3xx and iop13xx In order for this driver to be shared across the iop architectures the iop3xx and iop13xx header files are modified to present a common interface for the iop_wdt driver. Details: * iop13xx supports disabling the timer while iop3xx does not. This requires a few 'compatibility' definitions in include/asm-arm/hardware/iop3xx.h to preclude adding #ifdef CONFIG_ARCH_IOP13XX blocks to the driver code. * The heartbeat interval is derived from the internal bus clock rate, so this this patch also exports the tick rate to the iop_wdt driver. Cc: Curt Bruns Cc: Peter Milne Signed-off-by: Dan Williams Acked-by: Wim Van Sebroeck Signed-off-by: Russell King --- arch/arm/plat-iop/time.c | 8 + drivers/char/watchdog/Kconfig | 16 ++ drivers/char/watchdog/Makefile | 1 + drivers/char/watchdog/iop_wdt.c | 262 +++++++++++++++++++++++++ include/asm-arm/arch-iop13xx/iop13xx.h | 43 ++++ include/asm-arm/arch-iop13xx/system.h | 34 +--- include/asm-arm/hardware/iop3xx.h | 33 ++++ 7 files changed, 365 insertions(+), 32 deletions(-) create mode 100644 drivers/char/watchdog/iop_wdt.c diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c index 100d57ad98ed..ba3d21d8fba3 100644 --- a/arch/arm/plat-iop/time.c +++ b/arch/arm/plat-iop/time.c @@ -78,6 +78,13 @@ static struct irqaction iop_timer_irq = { .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, }; +static unsigned long iop_tick_rate; +unsigned long get_iop_tick_rate(void) +{ + return iop_tick_rate; +} +EXPORT_SYMBOL(get_iop_tick_rate); + void __init iop_init_time(unsigned long tick_rate) { u32 timer_ctl; @@ -85,6 +92,7 @@ void __init iop_init_time(unsigned long tick_rate) ticks_per_jiffy = (tick_rate + HZ/2) / HZ; ticks_per_usec = tick_rate / 1000000; next_jiffy_time = 0xffffffff; + iop_tick_rate = tick_rate; timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED | IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1; diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index 2f48ba329961..a4d81cda479e 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -187,6 +187,22 @@ config PNX4008_WATCHDOG Say N if you are unsure. +config IOP_WATCHDOG + tristate "IOP Watchdog" + depends on WATCHDOG && PLAT_IOP + select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X) + help + Say Y here if to include support for the watchdog timer + in the Intel IOP3XX & IOP13XX I/O Processors. This driver can + be built as a module by choosing M. The module will + be called iop_wdt. + + Note: The IOP13XX watchdog does an Internal Bus Reset which will + affect both cores and the peripherals of the IOP. The ATU-X + and/or ATUe configuration registers will remain intact, but if + operating as an Root Complex and/or Central Resource, the PCI-X + and/or PCIe busses will also be reset. THIS IS A VERY BIG HAMMER. + # AVR32 Architecture config AT32AP700X_WDT diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile index 3907ec04a4e5..bdb9d5e3bb41 100644 --- a/drivers/char/watchdog/Makefile +++ b/drivers/char/watchdog/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o +obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o # AVR32 Architecture obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o diff --git a/drivers/char/watchdog/iop_wdt.c b/drivers/char/watchdog/iop_wdt.c new file mode 100644 index 000000000000..bbbd91af754d --- /dev/null +++ b/drivers/char/watchdog/iop_wdt.c @@ -0,0 +1,262 @@ +/* + * drivers/char/watchdog/iop_wdt.c + * + * WDT driver for Intel I/O Processors + * Copyright (C) 2005, Intel Corporation. + * + * Based on ixp4xx driver, Copyright 2004 (c) MontaVista, Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + * Curt E Bruns + * Peter Milne + * Dan Williams + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int nowayout = WATCHDOG_NOWAYOUT; +static unsigned long wdt_status; +static unsigned long boot_status; + +#define WDT_IN_USE 0 +#define WDT_OK_TO_CLOSE 1 +#define WDT_ENABLED 2 + +static unsigned long iop_watchdog_timeout(void) +{ + return (0xffffffffUL / get_iop_tick_rate()); +} + +/** + * wdt_supports_disable - determine if we are accessing a iop13xx watchdog + * or iop3xx by whether it has a disable command + */ +static int wdt_supports_disable(void) +{ + int can_disable; + + if (IOP_WDTCR_EN_ARM != IOP_WDTCR_DIS_ARM) + can_disable = 1; + else + can_disable = 0; + + return can_disable; +} + +static void wdt_enable(void) +{ + /* Arm and enable the Timer to starting counting down from 0xFFFF.FFFF + * Takes approx. 10.7s to timeout + */ + write_wdtcr(IOP_WDTCR_EN_ARM); + write_wdtcr(IOP_WDTCR_EN); +} + +/* returns 0 if the timer was successfully disabled */ +static int wdt_disable(void) +{ + /* Stop Counting */ + if (wdt_supports_disable()) { + write_wdtcr(IOP_WDTCR_DIS_ARM); + write_wdtcr(IOP_WDTCR_DIS); + clear_bit(WDT_ENABLED, &wdt_status); + printk(KERN_INFO "WATCHDOG: Disabled\n"); + return 0; + } else + return 1; +} + +static int iop_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(WDT_IN_USE, &wdt_status)) + return -EBUSY; + + clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + + wdt_enable(); + + set_bit(WDT_ENABLED, &wdt_status); + + return nonseekable_open(inode, file); +} + +static ssize_t +iop_wdt_write(struct file *file, const char *data, size_t len, + loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + set_bit(WDT_OK_TO_CLOSE, &wdt_status); + } + } + wdt_enable(); + } + + return len; +} + +static struct watchdog_info ident = { + .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, + .identity = "iop watchdog", +}; + +static int +iop_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, + unsigned long arg) +{ + int options; + int ret = -ENOTTY; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user + ((struct watchdog_info *)arg, &ident, sizeof ident)) + ret = -EFAULT; + else + ret = 0; + break; + + case WDIOC_GETSTATUS: + ret = put_user(0, (int *)arg); + break; + + case WDIOC_GETBOOTSTATUS: + ret = put_user(boot_status, (int *)arg); + break; + + case WDIOC_GETTIMEOUT: + ret = put_user(iop_watchdog_timeout(), (int *)arg); + break; + + case WDIOC_KEEPALIVE: + wdt_enable(); + ret = 0; + break; + + case WDIOC_SETOPTIONS: + if (get_user(options, (int *)arg)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + if (!nowayout) { + if (wdt_disable() == 0) { + set_bit(WDT_OK_TO_CLOSE, &wdt_status); + ret = 0; + } else + ret = -ENXIO; + } else + ret = 0; + } + + if (options & WDIOS_ENABLECARD) { + wdt_enable(); + ret = 0; + } + break; + } + + return ret; +} + +static int iop_wdt_release(struct inode *inode, struct file *file) +{ + int state = 1; + if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) + if (test_bit(WDT_ENABLED, &wdt_status)) + state = wdt_disable(); + + /* if the timer is not disbaled reload and notify that we are still + * going down + */ + if (state != 0) { + wdt_enable(); + printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - " + "reset in %lu seconds\n", iop_watchdog_timeout()); + } + + clear_bit(WDT_IN_USE, &wdt_status); + clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + + return 0; +} + +static const struct file_operations iop_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = iop_wdt_write, + .ioctl = iop_wdt_ioctl, + .open = iop_wdt_open, + .release = iop_wdt_release, +}; + +static struct miscdevice iop_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &iop_wdt_fops, +}; + +static int __init iop_wdt_init(void) +{ + int ret; + + ret = misc_register(&iop_wdt_miscdev); + if (ret == 0) + printk("iop watchdog timer: timeout %lu sec\n", + iop_watchdog_timeout()); + + /* check if the reset was caused by the watchdog timer */ + boot_status = (read_rcsr() & IOP_RCSR_WDT) ? WDIOF_CARDRESET : 0; + + /* Configure Watchdog Timeout to cause an Internal Bus (IB) Reset + * NOTE: An IB Reset will Reset both cores in the IOP342 + */ + write_wdtsr(IOP13XX_WDTCR_IB_RESET); + + return ret; +} + +static void __exit iop_wdt_exit(void) +{ + misc_deregister(&iop_wdt_miscdev); +} + +module_init(iop_wdt_init); +module_exit(iop_wdt_exit); + +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); + +MODULE_AUTHOR("Curt E Bruns "); +MODULE_DESCRIPTION("iop watchdog timer driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/include/asm-arm/arch-iop13xx/iop13xx.h index d4e4f828577c..52b7fab7ef60 100644 --- a/include/asm-arm/arch-iop13xx/iop13xx.h +++ b/include/asm-arm/arch-iop13xx/iop13xx.h @@ -19,6 +19,39 @@ static inline int iop13xx_cpu_id(void) return id; } +/* WDTCR CP6 R7 Page 9 */ +static inline u32 read_wdtcr(void) +{ + u32 val; + asm volatile("mrc p6, 0, %0, c7, c9, 0":"=r" (val)); + return val; +} +static inline void write_wdtcr(u32 val) +{ + asm volatile("mcr p6, 0, %0, c7, c9, 0"::"r" (val)); +} + +/* WDTSR CP6 R8 Page 9 */ +static inline u32 read_wdtsr(void) +{ + u32 val; + asm volatile("mrc p6, 0, %0, c8, c9, 0":"=r" (val)); + return val; +} +static inline void write_wdtsr(u32 val) +{ + asm volatile("mcr p6, 0, %0, c8, c9, 0"::"r" (val)); +} + +/* RCSR - Reset Cause Status Register */ +static inline u32 read_rcsr(void) +{ + u32 val; + asm volatile("mrc p6, 0, %0, c0, c1, 0":"=r" (val)); + return val; +} + +extern unsigned long get_iop_tick_rate(void); #endif /* @@ -480,4 +513,14 @@ static inline int iop13xx_cpu_id(void) #define IOP13XX_PBI_LR1 IOP13XX_PBI_OFFSET(0x14) #define IOP13XX_PROCESSOR_FREQ IOP13XX_REG_ADDR32(0x2180) + +/* Watchdog timer definitions */ +#define IOP_WDTCR_EN_ARM 0x1e1e1e1e +#define IOP_WDTCR_EN 0xe1e1e1e1 +#define IOP_WDTCR_DIS_ARM 0x1f1f1f1f +#define IOP_WDTCR_DIS 0xf1f1f1f1 +#define IOP_RCSR_WDT (1 << 5) /* reset caused by watchdog timer */ +#define IOP13XX_WDTSR_WRITE_EN (1 << 31) /* used to speed up reset requests */ +#define IOP13XX_WDTCR_IB_RESET (1 << 0) + #endif /* _IOP13XX_HW_H_ */ diff --git a/include/asm-arm/arch-iop13xx/system.h b/include/asm-arm/arch-iop13xx/system.h index 127827058e1f..8575af8db78c 100644 --- a/include/asm-arm/arch-iop13xx/system.h +++ b/include/asm-arm/arch-iop13xx/system.h @@ -13,43 +13,13 @@ static inline void arch_idle(void) cpu_do_idle(); } -/* WDTCR CP6 R7 Page 9 */ -static inline u32 read_wdtcr(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c7, c9, 0":"=r" (val)); - return val; -} -static inline void write_wdtcr(u32 val) -{ - asm volatile("mcr p6, 0, %0, c7, c9, 0"::"r" (val)); -} - -/* WDTSR CP6 R8 Page 9 */ -static inline u32 read_wdtsr(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c8, c9, 0":"=r" (val)); - return val; -} -static inline void write_wdtsr(u32 val) -{ - asm volatile("mcr p6, 0, %0, c8, c9, 0"::"r" (val)); -} - -#define IOP13XX_WDTCR_EN_ARM 0x1e1e1e1e -#define IOP13XX_WDTCR_EN 0xe1e1e1e1 -#define IOP13XX_WDTCR_DIS_ARM 0x1f1f1f1f -#define IOP13XX_WDTCR_DIS 0xf1f1f1f1 -#define IOP13XX_WDTSR_WRITE_EN (1 << 31) -#define IOP13XX_WDTCR_IB_RESET (1 << 0) static inline void arch_reset(char mode) { /* * Reset the internal bus (warning both cores are reset) */ - write_wdtcr(IOP13XX_WDTCR_EN_ARM); - write_wdtcr(IOP13XX_WDTCR_EN); + write_wdtcr(IOP_WDTCR_EN_ARM); + write_wdtcr(IOP_WDTCR_EN); write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET); write_wdtcr(0x1000); diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h index 81ca5d3e2bff..fb90b421f31c 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/include/asm-arm/hardware/iop3xx.h @@ -194,6 +194,13 @@ extern int init_atu; #define IOP_TMR_PRIVILEGED 0x08 #define IOP_TMR_RATIO_1_1 0x00 +/* Watchdog timer definitions */ +#define IOP_WDTCR_EN_ARM 0x1e1e1e1e +#define IOP_WDTCR_EN 0xe1e1e1e1 +/* iop3xx does not support stopping the watchdog, so we just re-arm */ +#define IOP_WDTCR_DIS_ARM (IOP_WDTCR_EN_ARM) +#define IOP_WDTCR_DIS (IOP_WDTCR_EN) + /* Application accelerator unit */ #define IOP3XX_AAU_PHYS_BASE (IOP3XX_PERIPHERAL_PHYS_BASE + 0x800) #define IOP3XX_AAU_UPPER_PA (IOP3XX_AAU_PHYS_BASE + 0xa7) @@ -274,6 +281,32 @@ static inline void write_tisr(u32 val) asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (val)); } +static inline u32 read_wdtcr(void) +{ + u32 val; + asm volatile("mrc p6, 0, %0, c7, c1, 0":"=r" (val)); + return val; +} +static inline void write_wdtcr(u32 val) +{ + asm volatile("mcr p6, 0, %0, c7, c1, 0"::"r" (val)); +} + +extern unsigned long get_iop_tick_rate(void); + +/* only iop13xx has these registers, we define these to present a + * common register interface for the iop_wdt driver. + */ +#define IOP_RCSR_WDT (0) +static inline u32 read_rcsr(void) +{ + return 0; +} +static inline void write_wdtsr(u32 val) +{ + do { } while (0); +} + extern struct platform_device iop3xx_dma_0_channel; extern struct platform_device iop3xx_dma_1_channel; extern struct platform_device iop3xx_aau_channel; From 6accc0575c6b2105bf9b00bfc8cfee2cead3df6d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 15 Jul 2007 12:33:16 +0100 Subject: [PATCH 04/60] [ARM] rpc: remove linux/ptrace.h from ARM ether?.c drivers Signed-off-by: Russell King --- drivers/net/arm/ether1.c | 1 - drivers/net/arm/ether3.c | 1 - drivers/net/arm/etherh.c | 1 - 3 files changed, 3 deletions(-) diff --git a/drivers/net/arm/ether1.c b/drivers/net/arm/ether1.c index f21148e7b579..d1f2f684b709 100644 --- a/drivers/net/arm/ether1.c +++ b/drivers/net/arm/ether1.c @@ -36,7 +36,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c index a7cac695a9bd..32630493a4ef 100644 --- a/drivers/net/arm/ether3.c +++ b/drivers/net/arm/ether3.c @@ -51,7 +51,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c index 769ba69451f4..0d37d9d1fd78 100644 --- a/drivers/net/arm/etherh.c +++ b/drivers/net/arm/etherh.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include From 40c3a578a76ce0b20d1716e03b5a4b407ca9ca51 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 15 Jul 2007 12:48:57 +0100 Subject: [PATCH 05/60] [ARM] shut up "warning: "__IGNORE_sync_file_range" redefined" Signed-off-by: Russell King --- include/asm-arm/unistd.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h index bfdbebebdc1b..d327b25c986c 100644 --- a/include/asm-arm/unistd.h +++ b/include/asm-arm/unistd.h @@ -441,7 +441,6 @@ /* * Unimplemented (or alternatively implemented) syscalls */ -#define __IGNORE_sync_file_range 1 #define __IGNORE_fadvise64_64 1 #endif /* __KERNEL__ */ From 07ed31319422e82d50dfae7aebf88514d258b8f3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 15 Jul 2007 12:51:41 +0100 Subject: [PATCH 06/60] [ARM] rpc: silence two section mismatch warnings WARNING: drivers/built-in.o(.text+0x3fd54): Section mismatch: reference to .init.data: (between 'ether3_probe' and 'ether1_setmulticastlist') WARNING: drivers/built-in.o(.text+0x40380): Section mismatch: reference to .init.data: (between 'ether1_probe' and 'ether1_interrupt') Signed-off-by: Russell King --- drivers/net/arm/ether1.c | 2 +- drivers/net/arm/ether3.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/arm/ether1.c b/drivers/net/arm/ether1.c index d1f2f684b709..80f33b6d5713 100644 --- a/drivers/net/arm/ether1.c +++ b/drivers/net/arm/ether1.c @@ -74,7 +74,7 @@ static void ether1_timeout(struct net_device *dev); /* ------------------------------------------------------------------------- */ -static char version[] __initdata = "ether1 ethernet driver (c) 2000 Russell King v1.07\n"; +static char version[] __devinitdata = "ether1 ethernet driver (c) 2000 Russell King v1.07\n"; #define BUS_16 16 #define BUS_8 8 diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c index 32630493a4ef..3805506a3ab8 100644 --- a/drivers/net/arm/ether3.c +++ b/drivers/net/arm/ether3.c @@ -68,7 +68,7 @@ #include #include -static char version[] __initdata = "ether3 ethernet driver (c) 1995-2000 R.M.King v1.17\n"; +static char version[] __devinitdata = "ether3 ethernet driver (c) 1995-2000 R.M.King v1.17\n"; #include "ether3.h" From 1ad2cdbd0eaf0ddb3f634d10d01a2710b00b2051 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 15 Jul 2007 13:01:59 +0100 Subject: [PATCH 07/60] [ARM] remove asm/ptrace.h from asm/thread_info.h asm/thread_info.h doesn't need asm/ptrace.h, remove it. Signed-off-by: Russell King --- include/asm-arm/thread_info.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h index eae85b09db2e..69c65d56a6ac 100644 --- a/include/asm-arm/thread_info.h +++ b/include/asm-arm/thread_info.h @@ -24,7 +24,6 @@ struct task_struct; struct exec_domain; -#include #include #include From 21d1ca04532005c50ed57c2b2948e465b2e90720 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 15 Jul 2007 14:52:16 +0100 Subject: [PATCH 08/60] [ARM] avoid floppy warnings by using fd_dma_setup() Avoid the virt_to_bus()/bus_to_virt() warnings in floppy.c caused by the (useless) double conversion to/from bus addresses. Signed-off-by: Russell King --- include/asm-arm/floppy.h | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/include/asm-arm/floppy.h b/include/asm-arm/floppy.h index 54b5ae44ed94..d595c15166a4 100644 --- a/include/asm-arm/floppy.h +++ b/include/asm-arm/floppy.h @@ -30,15 +30,21 @@ #define fd_disable_irq() disable_irq(IRQ_FLOPPYDISK) #define fd_enable_irq() enable_irq(IRQ_FLOPPYDISK) +static inline int fd_dma_setup(void *data, unsigned int length, + unsigned int mode, unsigned long addr) +{ + set_dma_mode(DMA_FLOPPY, mode); + __set_dma_addr(DMA_FLOPPY, data); + set_dma_count(DMA_FLOPPY, length); + virtual_dma_port = addr; + enable_dma(DMA_FLOPPY); + return 0; +} +#define fd_dma_setup fd_dma_setup + #define fd_request_dma() request_dma(DMA_FLOPPY,"floppy") #define fd_free_dma() free_dma(DMA_FLOPPY) #define fd_disable_dma() disable_dma(DMA_FLOPPY) -#define fd_enable_dma() enable_dma(DMA_FLOPPY) -#define fd_clear_dma_ff() clear_dma_ff(DMA_FLOPPY) -#define fd_set_dma_mode(mode) set_dma_mode(DMA_FLOPPY, (mode)) -#define fd_set_dma_addr(addr) set_dma_addr(DMA_FLOPPY, virt_to_bus((addr))) -#define fd_set_dma_count(len) set_dma_count(DMA_FLOPPY, (len)) -#define fd_cacheflush(addr,sz) /* need to clean up dma.h */ #define DMA_FLOPPYDISK DMA_FLOPPY From 228adef16d6e7b7725ef6b9ba760810d5966afa5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 18 Jul 2007 09:37:10 +0100 Subject: [PATCH 09/60] [ARM] vfp: make fpexc bit names less verbose Use the fpexc abbreviated names instead of long verbose names for fpexc bits. Signed-off-by: Russell King --- arch/arm/vfp/vfphw.S | 12 ++++++------ arch/arm/vfp/vfpmodule.c | 12 ++++++------ include/asm-arm/vfp.h | 4 ++-- 3 files changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index d4b7b229631d..0ac022f800a1 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -74,14 +74,14 @@ vfp_support_entry: VFPFMRX r1, FPEXC @ Is the VFP enabled? DBGSTR1 "fpexc %08x", r1 - tst r1, #FPEXC_ENABLE + tst r1, #FPEXC_EN bne look_for_VFP_exceptions @ VFP is already enabled DBGSTR1 "enable %x", r10 ldr r3, last_VFP_context_address - orr r1, r1, #FPEXC_ENABLE @ user FPEXC has the enable bit set + orr r1, r1, #FPEXC_EN @ user FPEXC has the enable bit set ldr r4, [r3, r11, lsl #2] @ last_VFP_context pointer - bic r5, r1, #FPEXC_EXCEPTION @ make sure exceptions are disabled + bic r5, r1, #FPEXC_EX @ make sure exceptions are disabled cmp r4, r10 beq check_for_exception @ we are returning to the same @ process, so the registers are @@ -124,7 +124,7 @@ no_old_VFP_process: VFPFMXR FPSCR, r5 @ restore status check_for_exception: - tst r1, #FPEXC_EXCEPTION + tst r1, #FPEXC_EX bne process_exception @ might as well handle the pending @ exception before retrying branch @ out before setting an FPEXC that @@ -136,10 +136,10 @@ check_for_exception: look_for_VFP_exceptions: - tst r1, #FPEXC_EXCEPTION + tst r1, #FPEXC_EX bne process_exception VFPFMRX r5, FPSCR - tst r5, #FPSCR_IXE @ IXE doesn't set FPEXC_EXCEPTION ! + tst r5, #FPSCR_IXE @ IXE doesn't set FPEXC_EX ! bne process_exception @ Fall into hand on to next handler - appropriate coproc instr diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 1106b5f9cf19..04ddab2bd876 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -53,7 +53,7 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) * case the thread migrates to a different CPU. The * restoring is done lazily. */ - if ((fpexc & FPEXC_ENABLE) && last_VFP_context[cpu]) { + if ((fpexc & FPEXC_EN) && last_VFP_context[cpu]) { vfp_save_state(last_VFP_context[cpu], fpexc); last_VFP_context[cpu]->hard.cpu = cpu; } @@ -70,7 +70,7 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) * Always disable VFP so we can lazily save/restore the * old state. */ - fmxr(FPEXC, fpexc & ~FPEXC_ENABLE); + fmxr(FPEXC, fpexc & ~FPEXC_EN); return NOTIFY_DONE; } @@ -81,13 +81,13 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) */ memset(vfp, 0, sizeof(union vfp_state)); - vfp->hard.fpexc = FPEXC_ENABLE; + vfp->hard.fpexc = FPEXC_EN; vfp->hard.fpscr = FPSCR_ROUND_NEAREST; /* * Disable VFP to ensure we initialise it first. */ - fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE); + fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); } /* flush and release case: Per-thread VFP cleanup. */ @@ -229,7 +229,7 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) /* * Enable access to the VFP so we can handle the bounce. */ - fmxr(FPEXC, fpexc & ~(FPEXC_EXCEPTION|FPEXC_INV|FPEXC_UFC|FPEXC_IOC)); + fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_INV|FPEXC_UFC|FPEXC_IOC)); orig_fpscr = fpscr = fmrx(FPSCR); @@ -248,7 +248,7 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) /* * Modify fpscr to indicate the number of iterations remaining */ - if (fpexc & FPEXC_EXCEPTION) { + if (fpexc & FPEXC_EX) { u32 len; len = fpexc + (1 << FPEXC_LENGTH_BIT); diff --git a/include/asm-arm/vfp.h b/include/asm-arm/vfp.h index 14c5e0946c47..bd6be9d7f772 100644 --- a/include/asm-arm/vfp.h +++ b/include/asm-arm/vfp.h @@ -26,8 +26,8 @@ #define FPSID_REV_MASK (0xF << FPSID_REV_BIT) /* FPEXC bits */ -#define FPEXC_EXCEPTION (1<<31) -#define FPEXC_ENABLE (1<<30) +#define FPEXC_EX (1 << 31) +#define FPEXC_EN (1 << 30) /* FPSCR bits */ #define FPSCR_DEFAULT_NAN (1<<25) From 6a4d0287c7418b24dd776d8977edff2bfa706539 Mon Sep 17 00:00:00 2001 From: Kristoffer Ericson Date: Sat, 7 Jul 2007 17:45:10 +0100 Subject: [PATCH 10/60] [ARM] 4459/1: Changing email in MAINTAINERS file Updating email adress in MAINTAINER file. Signed-off-by: Kristoffer Ericson Signed-off-by: Russell King --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index fbe0dca1c0ed..57c07c20af40 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -457,7 +457,7 @@ S: Maintained ARM/HP JORNADA 7XX MACHINE SUPPORT P: Kristoffer Ericson -M: kristoffer_e1@hotmail.com +M: kristoffer.ericson@gmail.com W: www.jlime.com S: Maintained From c06911c00b2af93e498ba45200ad903929e71529 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 16 Jul 2007 11:35:40 +0100 Subject: [PATCH 11/60] [ARM] 4478/1: AT91: Convert AT91RM9200 to use atmel_spi driver Convert the AT91RM9200 platform-setup code to use the new atmel_spi driver (and manually-driven chip-selects), instead of the legacy AT91-only SPI stack. The AT91SAM9 processors are already using the atmel_spi driver. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91rm9200_devices.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 70599bcf451c..0417c165d50d 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -477,7 +477,7 @@ void __init at91_add_device_i2c(void) {} * SPI * -------------------------------------------------------------------- */ -#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) +#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) static u64 spi_dmamask = 0xffffffffUL; static struct resource spi_resources[] = { @@ -494,7 +494,7 @@ static struct resource spi_resources[] = { }; static struct platform_device at91rm9200_spi_device = { - .name = "at91_spi", + .name = "atmel_spi", .id = 0, .dev = { .dma_mask = &spi_dmamask, @@ -522,18 +522,14 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi_standard_cs[devices[i].chip_select]; -#ifdef CONFIG_SPI_AT91_MANUAL_CS + /* enable chip-select pin */ at91_set_gpio_output(cs_pin, 1); -#else - at91_set_A_periph(cs_pin, 0); -#endif /* pass chip-select pin to driver */ devices[i].controller_data = (void *) cs_pin; } spi_register_board_info(devices, nr_devices); - at91_clock_associate("spi_clk", &at91rm9200_spi_device.dev, "spi"); platform_device_register(&at91rm9200_spi_device); } #else From ed54fcfd785e8fecfbd8b129466235fc4ab0a402 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 16 Jul 2007 11:55:42 +0100 Subject: [PATCH 12/60] [ARM] 4479/1: AT91: Define new MMC register bits Add definitions for RDPROOF, WRPROOF and PDCFBYTE bits of the Mode Register in the updated MMC controller found on the AT91SAM9260 and AT91SAM9263 processors. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91/at91_mci.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h index 40a9876b661a..c2e11cc374ba 100644 --- a/include/asm-arm/arch-at91/at91_mci.h +++ b/include/asm-arm/arch-at91/at91_mci.h @@ -26,6 +26,9 @@ #define AT91_MCI_MR 0x04 /* Mode Register */ #define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */ #define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */ +#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */ +#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */ +#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */ #define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */ #define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */ #define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */ From 3be20cad15107adc423ac812ac7b3330ca195c74 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 15 Jul 2007 12:21:37 +0100 Subject: [PATCH 13/60] [ARM] ks8695: no need to include linux/ptrace.h arch/arm/mach-ks8695/irq.c doesn't need to include linux/ptrace.h so remove it. Signed-off-by: Russell King --- arch/arm/mach-ks8695/irq.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c index 2407bba00547..4c3ab43e1046 100644 --- a/arch/arm/mach-ks8695/irq.c +++ b/arch/arm/mach-ks8695/irq.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include From 5c9b9123b35e28dd7cb3012f3f8d4ea13a30631c Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Sat, 14 Jul 2007 11:15:05 +0200 Subject: [PATCH 14/60] [ARM] ixp4xx: fix IRQ GPIO direction configuration for GPIOs >= 8 I believe that the following patch is necessary to properly configure GPIO line configuration for IRQ's which are mapped to a GPIO line >= 8 (without this patch the wrong GPIO is configured as an input.) Signed-off-by: Tim Harvey Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 8112f726ffa0..4c54a86eda3a 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -188,7 +188,7 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); /* Configure the line as an input */ - gpio_line_config(line, IXP4XX_GPIO_IN); + gpio_line_config(irq2gpio[irq], IXP4XX_GPIO_IN); return 0; } From 4b300c362d690c8e0788f69ed91c22a0a76f7ce2 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 17 Jul 2007 13:35:46 +0100 Subject: [PATCH 15/60] [ARM] 4481/1: Fix a bug when i.MX is compiled as a module Fix the unregistration order in the i.MX serial driver Signed-off-by: Sreekrishnan Venkateswaran Acked-by: Sascha Hauer Signed-off-by: Russell King --- drivers/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index e42faa4e4282..dc1967176fe2 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1114,8 +1114,8 @@ static int __init imx_serial_init(void) static void __exit imx_serial_exit(void) { - uart_unregister_driver(&imx_reg); platform_driver_unregister(&serial_imx_driver); + uart_unregister_driver(&imx_reg); } module_init(imx_serial_init); From e09d02e123fb6944af23a0697369ebcfc15acf73 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 17 Jul 2007 10:45:58 +0100 Subject: [PATCH 16/60] [ARM] 4480/1: pxa: change the pxa device naming scheme 1. for common devices across all the pxa variants, the names are changed to be: "pxa_device_xxx" 2. for pxa25x or pxa27x specific devices, the names are changed to be: "pxa25x_device_xxx", or "pxa27x_device_xxx" Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/devices.h | 22 +++++++++++----------- arch/arm/mach-pxa/generic.c | 32 ++++++++++++++++---------------- arch/arm/mach-pxa/pxa25x.c | 22 +++++++++++----------- arch/arm/mach-pxa/pxa27x.c | 30 +++++++++++++++--------------- 4 files changed, 53 insertions(+), 53 deletions(-) diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 9a6faff8e5a7..636fdb1c049c 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -1,11 +1,11 @@ -extern struct platform_device pxamci_device; -extern struct platform_device pxaudc_device; -extern struct platform_device pxafb_device; -extern struct platform_device ffuart_device; -extern struct platform_device btuart_device; -extern struct platform_device stuart_device; -extern struct platform_device hwuart_device; -extern struct platform_device pxai2c_device; -extern struct platform_device pxai2s_device; -extern struct platform_device pxaficp_device; -extern struct platform_device pxartc_device; +extern struct platform_device pxa_device_mci; +extern struct platform_device pxa_device_udc; +extern struct platform_device pxa_device_fb; +extern struct platform_device pxa_device_ffuart; +extern struct platform_device pxa_device_btuart; +extern struct platform_device pxa_device_stuart; +extern struct platform_device pxa_device_hwuart; +extern struct platform_device pxa_device_i2c; +extern struct platform_device pxa_device_i2s; +extern struct platform_device pxa_device_ficp; +extern struct platform_device pxa_device_rtc; diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 296539b6359c..5510f6fdce55 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -243,7 +243,7 @@ static struct resource pxamci_resources[] = { static u64 pxamci_dmamask = 0xffffffffUL; -struct platform_device pxamci_device = { +struct platform_device pxa_device_mci = { .name = "pxa2xx-mci", .id = -1, .dev = { @@ -256,7 +256,7 @@ struct platform_device pxamci_device = { void __init pxa_set_mci_info(struct pxamci_platform_data *info) { - pxamci_device.dev.platform_data = info; + pxa_device_mci.dev.platform_data = info; } @@ -282,7 +282,7 @@ static struct resource pxa2xx_udc_resources[] = { static u64 udc_dma_mask = ~(u32)0; -struct platform_device pxaudc_device = { +struct platform_device pxa_device_udc = { .name = "pxa2xx-udc", .id = -1, .resource = pxa2xx_udc_resources, @@ -308,7 +308,7 @@ static struct resource pxafb_resources[] = { static u64 fb_dma_mask = ~(u64)0; -struct platform_device pxafb_device = { +struct platform_device pxa_device_fb = { .name = "pxa2xx-fb", .id = -1, .dev = { @@ -321,27 +321,27 @@ struct platform_device pxafb_device = { void __init set_pxa_fb_info(struct pxafb_mach_info *info) { - pxafb_device.dev.platform_data = info; + pxa_device_fb.dev.platform_data = info; } void __init set_pxa_fb_parent(struct device *parent_dev) { - pxafb_device.dev.parent = parent_dev; + pxa_device_fb.dev.parent = parent_dev; } -struct platform_device ffuart_device = { +struct platform_device pxa_device_ffuart= { .name = "pxa2xx-uart", .id = 0, }; -struct platform_device btuart_device = { +struct platform_device pxa_device_btuart = { .name = "pxa2xx-uart", .id = 1, }; -struct platform_device stuart_device = { +struct platform_device pxa_device_stuart = { .name = "pxa2xx-uart", .id = 2, }; -struct platform_device hwuart_device = { +struct platform_device pxa_device_hwuart = { .name = "pxa2xx-uart", .id = 3, }; @@ -358,7 +358,7 @@ static struct resource pxai2c_resources[] = { }, }; -struct platform_device pxai2c_device = { +struct platform_device pxa_device_i2c = { .name = "pxa2xx-i2c", .id = 0, .resource = pxai2c_resources, @@ -367,7 +367,7 @@ struct platform_device pxai2c_device = { void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info) { - pxai2c_device.dev.platform_data = info; + pxa_device_i2c.dev.platform_data = info; } static struct resource pxai2s_resources[] = { @@ -382,7 +382,7 @@ static struct resource pxai2s_resources[] = { }, }; -struct platform_device pxai2s_device = { +struct platform_device pxa_device_i2s = { .name = "pxa2xx-i2s", .id = -1, .resource = pxai2s_resources, @@ -391,7 +391,7 @@ struct platform_device pxai2s_device = { static u64 pxaficp_dmamask = ~(u32)0; -struct platform_device pxaficp_device = { +struct platform_device pxa_device_ficp = { .name = "pxa2xx-ir", .id = -1, .dev = { @@ -402,10 +402,10 @@ struct platform_device pxaficp_device = { void __init pxa_set_ficp_info(struct pxaficp_platform_data *info) { - pxaficp_device.dev.platform_data = info; + pxa_device_ficp.dev.platform_data = info; } -struct platform_device pxartc_device = { +struct platform_device pxa_device_rtc = { .name = "sa1100-rtc", .id = -1, }; diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index f36ca448338e..9d9422e2f75c 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -139,16 +139,16 @@ void __init pxa25x_init_irq(void) } static struct platform_device *pxa25x_devices[] __initdata = { - &pxamci_device, - &pxaudc_device, - &pxafb_device, - &ffuart_device, - &btuart_device, - &stuart_device, - &pxai2c_device, - &pxai2s_device, - &pxaficp_device, - &pxartc_device, + &pxa_device_mci, + &pxa_device_udc, + &pxa_device_fb, + &pxa_device_ffuart, + &pxa_device_btuart, + &pxa_device_stuart, + &pxa_device_i2c, + &pxa_device_i2s, + &pxa_device_ficp, + &pxa_device_rtc, }; static int __init pxa25x_init(void) @@ -166,7 +166,7 @@ static int __init pxa25x_init(void) } /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */ if (cpu_is_pxa25x()) - ret = platform_device_register(&hwuart_device); + ret = platform_device_register(&pxa_device_hwuart); return ret; } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index aa5bb02c897b..c85f0b01c326 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -185,7 +185,7 @@ static struct resource pxa27x_ohci_resources[] = { }, }; -static struct platform_device pxaohci_device = { +static struct platform_device pxa27x_device_ohci = { .name = "pxa27x-ohci", .id = -1, .dev = { @@ -198,7 +198,7 @@ static struct platform_device pxaohci_device = { void __init pxa_set_ohci_info(struct pxaohci_platform_data *info) { - pxaohci_device.dev.platform_data = info; + pxa27x_device_ohci.dev.platform_data = info; } static struct resource i2c_power_resources[] = { @@ -213,7 +213,7 @@ static struct resource i2c_power_resources[] = { }, }; -static struct platform_device pxai2c_power_device = { +static struct platform_device pxa27x_device_i2c_power = { .name = "pxa2xx-i2c", .id = 1, .resource = i2c_power_resources, @@ -221,18 +221,18 @@ static struct platform_device pxai2c_power_device = { }; static struct platform_device *devices[] __initdata = { - &pxamci_device, - &pxaudc_device, - &pxafb_device, - &ffuart_device, - &btuart_device, - &stuart_device, - &pxai2c_device, - &pxai2c_power_device, - &pxai2s_device, - &pxaficp_device, - &pxartc_device, - &pxaohci_device, + &pxa_device_mci, + &pxa_device_udc, + &pxa_device_fb, + &pxa_device_ffuart, + &pxa_device_btuart, + &pxa_device_stuart, + &pxa_device_i2c, + &pxa_device_i2s, + &pxa_device_ficp, + &pxa_device_rtc, + &pxa27x_device_i2c_power, + &pxa27x_device_ohci, }; void __init pxa27x_init_irq(void) From 3f20246bb67594acae5a82a8b859f21579b0ff07 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 17 Jul 2007 22:33:18 +0100 Subject: [PATCH 17/60] [ARM] 4482/1: ns9xxx: fix compilation for mach-type CC9P9360JS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I must have written the patch introducing support for this machine deep in the night... Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/Makefile | 1 + arch/arm/mach-ns9xxx/mach-cc9p9360js.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-ns9xxx/Makefile b/arch/arm/mach-ns9xxx/Makefile index 53213a69f601..4476411b8140 100644 --- a/arch/arm/mach-ns9xxx/Makefile +++ b/arch/arm/mach-ns9xxx/Makefile @@ -1,6 +1,7 @@ obj-y := irq.o time.o generic.o obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o +obj-$(CONFIG_MACH_CC9P9360JS) += mach-cc9p9360js.o obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o obj-$(CONFIG_BOARD_JSCC9P9360) += board-jscc9p9360.o diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c index d09d5fa5620a..85c8b41105c9 100644 --- a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c +++ b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c @@ -20,7 +20,7 @@ static void __init mach_cc9p9360js_init_machine(void) board_jscc9p9360_init_machine(); } -MACHINE_START(CC9P9360DEV, "Digi ConnectCore 9P 9360 on an JSCC9P9360 Devboard") +MACHINE_START(CC9P9360JS, "Digi ConnectCore 9P 9360 on an JSCC9P9360 Devboard") .map_io = ns9xxx_map_io, .init_irq = ns9xxx_init_irq, .init_machine = mach_cc9p9360js_init_machine, From aa4db079f7c4cf389fc25f78b943589b4a6401de Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 17 Jul 2007 22:34:28 +0100 Subject: [PATCH 18/60] [ARM] 4483/1: ns9xxx: fix three sparse warnings: symbol 'xyz' was not declared. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit make ns9xxx_ack_irq_functions static and add one include to get declarations for ns9xxx_map_io and ns9xxx_init_machine. Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/generic.c | 2 ++ arch/arm/mach-ns9xxx/irq.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-ns9xxx/generic.c b/arch/arm/mach-ns9xxx/generic.c index 83e2b6532b22..d742c921e34d 100644 --- a/arch/arm/mach-ns9xxx/generic.c +++ b/arch/arm/mach-ns9xxx/generic.c @@ -18,6 +18,8 @@ #include #include +#include "generic.h" + static struct map_desc standard_io_desc[] __initdata = { { /* BBus */ .virtual = io_p2v(0x90000000), diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c index 83d92724a971..cd8f8365b62e 100644 --- a/arch/arm/mach-ns9xxx/irq.c +++ b/arch/arm/mach-ns9xxx/irq.c @@ -28,7 +28,7 @@ static void ns9xxx_ack_irq_timer(unsigned int irq) SYS_TC(irq - IRQ_TIMER0) = tc; } -void (*ns9xxx_ack_irq_functions[NR_IRQS])(unsigned int) = { +static void (*ns9xxx_ack_irq_functions[NR_IRQS])(unsigned int) = { [IRQ_TIMER0] = ns9xxx_ack_irq_timer, [IRQ_TIMER1] = ns9xxx_ack_irq_timer, [IRQ_TIMER2] = ns9xxx_ack_irq_timer, From 70ca7d55e1e10a5b654295b04dc8854e245a352f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 17 Jul 2007 22:35:14 +0100 Subject: [PATCH 19/60] [ARM] 4484/1: ns9xxx: fix definition of SYS_TCx_TEN_DIS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- include/asm-arm/arch-ns9xxx/regs-sys.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-arm/arch-ns9xxx/regs-sys.h b/include/asm-arm/arch-ns9xxx/regs-sys.h index a42546aeb92a..749262f86204 100644 --- a/include/asm-arm/arch-ns9xxx/regs-sys.h +++ b/include/asm-arm/arch-ns9xxx/regs-sys.h @@ -64,7 +64,7 @@ /* Timer x Control register: Timer enable */ #define SYS_TCx_TEN __REGBIT(15) -#define SYS_TCx_TEN_DIS __REGVAL(SYS_TCx_TEN, 1) +#define SYS_TCx_TEN_DIS __REGVAL(SYS_TCx_TEN, 0) #define SYS_TCx_TEN_EN __REGVAL(SYS_TCx_TEN, 1) /* Timer x Control register: CPU debug mode */ From cebfaf5f1c4dcf9456463c8411ae869f3c03619f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 17 Jul 2007 22:35:34 +0100 Subject: [PATCH 20/60] [ARM] 4485/1: ns9xxx: pass the correct irq number to the interrupt handlers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/board-a9m9750dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c index 25289884a607..267c2a1e1188 100644 --- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c +++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c @@ -77,7 +77,7 @@ static void a9m9750dev_fpga_demux_handler(unsigned int irq, desc = irq_desc + FPGA_IRQ(irqno); - desc_handle_irq(irqno, desc); + desc_handle_irq(FPGA_IRQ(irqno), desc); } } From f4ae6413f4d4889c8bf3fb90939d967ced65ece7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 17 Jul 2007 22:35:52 +0100 Subject: [PATCH 21/60] [ARM] 4486/1: ns9xxx: fix a typo in the register definitions. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixed all users. Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/board-a9m9750dev.c | 2 +- include/asm-arm/arch-ns9xxx/regs-mem.h | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c index 267c2a1e1188..6eee8084b613 100644 --- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c +++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c @@ -178,7 +178,7 @@ void __init board_a9m9750dev_init_machine(void) /* setup static CS0: memory configuration */ reg = MEM_SMC(0); - REGSET(reg, MEM_SMC, WSMC, OFF); + REGSET(reg, MEM_SMC, PSMC, OFF); REGSET(reg, MEM_SMC, BSMC, OFF); REGSET(reg, MEM_SMC, EW, OFF); REGSET(reg, MEM_SMC, PB, 1); diff --git a/include/asm-arm/arch-ns9xxx/regs-mem.h b/include/asm-arm/arch-ns9xxx/regs-mem.h index 8ed8448767b9..fb455a0ed845 100644 --- a/include/asm-arm/arch-ns9xxx/regs-mem.h +++ b/include/asm-arm/arch-ns9xxx/regs-mem.h @@ -79,9 +79,9 @@ #define MEM_SMC(x) __REG2(0xa0700200, (x) << 3) /* Static Memory Configuration Register x: Write protect */ -#define MEM_SMC_WSMC __REGBIT(20) -#define MEM_SMC_WSMC_OFF __REGVAL(MEM_SMC_WSMC, 0) -#define MEM_SMC_WSMC_ON __REGVAL(MEM_SMC_WSMC, 1) +#define MEM_SMC_PSMC __REGBIT(20) +#define MEM_SMC_PSMC_OFF __REGVAL(MEM_SMC_PSMC, 0) +#define MEM_SMC_PSMC_ON __REGVAL(MEM_SMC_PSMC, 1) /* Static Memory Configuration Register x: Buffer enable */ #define MEM_SMC_BSMC __REGBIT(19) From 3945a567d0c1d6721994a88f58f028c27d8249d2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 17 Jul 2007 22:36:09 +0100 Subject: [PATCH 22/60] [ARM] 4487/1: ns9xxx: complete definition of GPIO related registers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I changed the naming to be more obvious---unfortunately the HRM doesn't specify these. Moreover the numbering is changed to be zero indexed as this is more natural. Adjust all callers. Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/board-a9m9750dev.c | 3 +-- include/asm-arm/arch-ns9xxx/regs-bbu.h | 28 +++++++++++++++++++++++-- 2 files changed, 27 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c index 6eee8084b613..925048e7adfe 100644 --- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c +++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c @@ -91,7 +91,7 @@ void __init board_a9m9750dev_init_irq(void) * use GPIO 11, because GPIO 32 is used for the LCD */ /* XXX: proper GPIO handling */ - BBU_GC(2) &= ~0x2000; + BBU_GCONFb1(1) &= ~0x2000; for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) { set_irq_chip(i, &a9m9750dev_fpga_chip); @@ -196,4 +196,3 @@ void __init board_a9m9750dev_init_machine(void) platform_add_devices(board_a9m9750dev_devices, ARRAY_SIZE(board_a9m9750dev_devices)); } - diff --git a/include/asm-arm/arch-ns9xxx/regs-bbu.h b/include/asm-arm/arch-ns9xxx/regs-bbu.h index e26269546240..7ee194dc6354 100644 --- a/include/asm-arm/arch-ns9xxx/regs-bbu.h +++ b/include/asm-arm/arch-ns9xxx/regs-bbu.h @@ -15,7 +15,31 @@ /* BBus Utility */ -/* GPIO Configuration Register */ -#define BBU_GC(x) __REG2(0x9060000c, (x)) +/* GPIO Configuration Registers block 1 */ +/* NOTE: the HRM starts counting at 1 for the GPIO registers, here the start is + * at 0 for each block. That is, BBU_GCONFb1(0) is GPIO Configuration Register + * #1, BBU_GCONFb2(0) is GPIO Configuration Register #8. */ +#define BBU_GCONFb1(x) __REG2(0x90600010, (x)) +#define BBU_GCONFb2(x) __REG2(0x90600100, (x)) + +#define BBU_GCONFx_DIR(m) __REGBIT(3 + (((m) & 7) << 2)) +#define BBU_GCONFx_DIR_INPUT(m) __REGVAL(BBU_GCONFx_DIR(m), 0) +#define BBU_GCONFx_DIR_OUTPUT(m) __REGVAL(BBU_GCONFx_DIR(m), 1) +#define BBU_GCONFx_INV(m) __REGBIT(2 + (((m) & 7) << 2)) +#define BBU_GCONFx_INV_NO(m) __REGVAL(BBU_GCONFx_INV(m), 0) +#define BBU_GCONFx_INV_YES(m) __REGVAL(BBU_GCONFx_INV(m), 1) +#define BBU_GCONFx_FUNC(m) __REGBITS(1 + (((m) & 7) << 2), ((m) & 7) << 2) +#define BBU_GCONFx_FUNC_0(m) __REGVAL(BBU_GCONFx_FUNC(m), 0) +#define BBU_GCONFx_FUNC_1(m) __REGVAL(BBU_GCONFx_FUNC(m), 1) +#define BBU_GCONFx_FUNC_2(m) __REGVAL(BBU_GCONFx_FUNC(m), 2) +#define BBU_GCONFx_FUNC_3(m) __REGVAL(BBU_GCONFx_FUNC(m), 3) + +#define BBU_GCTRL1 __REG(0x90600030) +#define BBU_GCTRL2 __REG(0x90600034) +#define BBU_GCTRL3 __REG(0x90600120) + +#define BBU_GSTAT1 __REG(0x90600040) +#define BBU_GSTAT2 __REG(0x90600044) +#define BBU_GSTAT3 __REG(0x90600130) #endif /* ifndef __ASM_ARCH_REGSBBU_H */ From 26c671c6b7c02bc9f9c42331e6ecbeccdf67164c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 19 Jul 2007 22:13:05 +0100 Subject: [PATCH 23/60] [ARM] 4493/1: ns9xxx: disable a non-reloading timer before ack'ing its irq MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The HRM states that is must be done this way ... Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/irq.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c index cd8f8365b62e..b8c7b00522e6 100644 --- a/arch/arm/mach-ns9xxx/irq.c +++ b/arch/arm/mach-ns9xxx/irq.c @@ -21,6 +21,15 @@ static void ns9xxx_ack_irq_timer(unsigned int irq) { u32 tc = SYS_TC(irq - IRQ_TIMER0); + /* + * If the timer is programmed to halt on terminal count, the + * timer must be disabled before clearing the interrupt. + */ + if (REGGET(tc, SYS_TCx, REN) == 0) { + REGSET(tc, SYS_TCx, TEN, DIS); + SYS_TC(irq - IRQ_TIMER0) = tc; + } + REGSET(tc, SYS_TCx, INTC, SET); SYS_TC(irq - IRQ_TIMER0) = tc; From 711be5ccfe9a02ba560aa918a008c31ea4760163 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 18 Jul 2007 11:38:45 +0100 Subject: [PATCH 24/60] [ARM] 4488/1: pxa: move pxa25x/pxa27x specific code out of pm.c 1. introduce a structure pxa_cpu_pm_fns for pxa25x/pxa27x specific operations as follows: struct pxa_cpu_pm_fns { int save_size; void (*save)(unsigned long *); void (*restore)(unsigned long *); int (*valid)(suspend_state_t state); void (*enter)(suspend_state_t state); } 2. processor specific registers saving and restoring are performed by calling the corresponding (*save) and (*restore) 3. pxa_cpu_pm_fns->save_size should be initialized to the required size for processor specific registers saving, the allocated memory address will be passed to (*save) and (*restore) memory allocation happens early in pxa_pm_init(), and save_size should be assigned prior to this (which is usually true, since pxa_pm_init() happens in device_initcall() 4. there're some redundancies for those SLEEP_SAVE_XXX and related macros, will be fixed later, one way possible is for the system devices to handle the specific registers saving and restoring Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/pm.c | 169 +++++++++------------------------- arch/arm/mach-pxa/pxa25x.c | 84 ++++++++++++++++- arch/arm/mach-pxa/pxa27x.c | 117 +++++++++++++++++++++-- include/asm-arm/arch-pxa/pm.h | 11 ++- 4 files changed, 244 insertions(+), 137 deletions(-) diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index e66dbc26add1..b59a81a8e7d3 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -24,61 +24,13 @@ #include #include - -/* - * Debug macros - */ -#undef DEBUG - -#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x -#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] - -#define RESTORE_GPLEVEL(n) do { \ - GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \ - GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \ -} while (0) - -/* - * List of global PXA peripheral registers to preserve. - * More ones like CP and general purpose register values are preserved - * with the stack pointer in sleep.S. - */ -enum { SLEEP_SAVE_START = 0, - - SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2, SLEEP_SAVE_GPLR3, - SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, SLEEP_SAVE_GPDR3, - SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, SLEEP_SAVE_GRER3, - SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, SLEEP_SAVE_GFER3, - SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3, - - SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U, - SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U, - SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U, - SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U, - - SLEEP_SAVE_PSTR, - - SLEEP_SAVE_ICMR, - SLEEP_SAVE_CKEN, - -#ifdef CONFIG_PXA27x - SLEEP_SAVE_MDREFR, - SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER, - SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR, -#endif - - SLEEP_SAVE_CKSUM, - - SLEEP_SAVE_SIZE -}; - +struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; +static unsigned long *sleep_save; int pxa_pm_enter(suspend_state_t state) { - unsigned long sleep_save[SLEEP_SAVE_SIZE]; - unsigned long checksum = 0; + unsigned long sleep_save_checksum = 0, checksum = 0; int i; - extern void pxa_cpu_pm_enter(suspend_state_t state); #ifdef CONFIG_IWMMXT /* force any iWMMXt context to ram **/ @@ -86,100 +38,35 @@ int pxa_pm_enter(suspend_state_t state) iwmmxt_task_disable(NULL); #endif - SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2); - SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2); - SAVE(GRER0); SAVE(GRER1); SAVE(GRER2); - SAVE(GFER0); SAVE(GFER1); SAVE(GFER2); - SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); - - SAVE(GAFR0_L); SAVE(GAFR0_U); - SAVE(GAFR1_L); SAVE(GAFR1_U); - SAVE(GAFR2_L); SAVE(GAFR2_U); - -#ifdef CONFIG_PXA27x - SAVE(MDREFR); - SAVE(GPLR3); SAVE(GPDR3); SAVE(GRER3); SAVE(GFER3); SAVE(PGSR3); - SAVE(GAFR3_L); SAVE(GAFR3_U); - SAVE(PWER); SAVE(PCFR); SAVE(PRER); - SAVE(PFER); SAVE(PKWR); -#endif - - SAVE(ICMR); - ICMR = 0; - - SAVE(CKEN); - SAVE(PSTR); - - /* Note: wake up source are set up in each machine specific files */ - - /* clear GPIO transition detect bits */ - GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2; -#ifdef CONFIG_PXA27x - GEDR3 = GEDR3; -#endif + pxa_cpu_pm_fns->save(sleep_save); /* Clear sleep reset status */ RCSR = RCSR_SMR; /* before sleeping, calculate and save a checksum */ - for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++) - checksum += sleep_save[i]; - sleep_save[SLEEP_SAVE_CKSUM] = checksum; + for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++) + sleep_save_checksum += sleep_save[i]; /* *** go zzz *** */ - pxa_cpu_pm_enter(state); - + pxa_cpu_pm_fns->enter(state); cpu_init(); /* after sleeping, validate the checksum */ - checksum = 0; - for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++) + for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++) checksum += sleep_save[i]; /* if invalid, display message and wait for a hardware reset */ - if (checksum != sleep_save[SLEEP_SAVE_CKSUM]) { + if (checksum != sleep_save_checksum) { #ifdef CONFIG_ARCH_LUBBOCK LUB_HEXLED = 0xbadbadc5; #endif while (1) - pxa_cpu_pm_enter(state); + pxa_cpu_pm_fns->enter(state); } - /* ensure not to come back here if it wasn't intended */ - PSPR = 0; + pxa_cpu_pm_fns->restore(sleep_save); - /* restore registers */ - RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2); - RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); - RESTORE(GAFR0_L); RESTORE(GAFR0_U); - RESTORE(GAFR1_L); RESTORE(GAFR1_U); - RESTORE(GAFR2_L); RESTORE(GAFR2_U); - RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2); - RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2); - RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); - -#ifdef CONFIG_PXA27x - RESTORE(MDREFR); - RESTORE_GPLEVEL(3); RESTORE(GPDR3); - RESTORE(GAFR3_L); RESTORE(GAFR3_U); - RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3); - RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER); - RESTORE(PFER); RESTORE(PKWR); -#endif - - PSSR = PSSR_RDH | PSSR_PH; - - RESTORE(CKEN); - - ICLR = 0; - ICCR = 1; - RESTORE(ICMR); - - RESTORE(PSTR); - -#ifdef DEBUG - printk(KERN_DEBUG "*** made it back from resume\n"); -#endif + pr_debug("*** made it back from resume\n"); return 0; } @@ -190,3 +77,35 @@ unsigned long sleep_phys_sp(void *sp) { return virt_to_phys(sp); } + +static int pxa_pm_valid(suspend_state_t state) +{ + if (pxa_cpu_pm_fns) + return pxa_cpu_pm_fns->valid(state); + + return -EINVAL; +} + +static struct pm_ops pxa_pm_ops = { + .valid = pxa_pm_valid, + .enter = pxa_pm_enter, +}; + +static int __init pxa_pm_init(void) +{ + if (!pxa_cpu_pm_fns) { + printk(KERN_ERR "no valid pxa_cpu_pm_fns defined\n"); + return -EINVAL; + } + + sleep_save = kmalloc(pxa_cpu_pm_fns->save_size, GFP_KERNEL); + if (!sleep_save) { + printk(KERN_ERR "failed to alloc memory for pm save\n"); + return -ENOMEM; + } + + pm_set_ops(&pxa_pm_ops); + return 0; +} + +device_initcall(pxa_pm_init); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 9d9422e2f75c..1ec4bf1ff249 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -110,7 +110,75 @@ EXPORT_SYMBOL(get_lcdclk_frequency_10khz); #ifdef CONFIG_PM -void pxa_cpu_pm_enter(suspend_state_t state) +#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x +#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] + +#define RESTORE_GPLEVEL(n) do { \ + GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \ + GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \ +} while (0) + +/* + * List of global PXA peripheral registers to preserve. + * More ones like CP and general purpose register values are preserved + * with the stack pointer in sleep.S. + */ +enum { SLEEP_SAVE_START = 0, + + SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2, + SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, + SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, + SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, + SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, + + SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U, + SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U, + SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U, + + SLEEP_SAVE_PSTR, + + SLEEP_SAVE_ICMR, + SLEEP_SAVE_CKEN, + + SLEEP_SAVE_SIZE +}; + + +static void pxa25x_cpu_pm_save(unsigned long *sleep_save) +{ + SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2); + SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2); + SAVE(GRER0); SAVE(GRER1); SAVE(GRER2); + SAVE(GFER0); SAVE(GFER1); SAVE(GFER2); + SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); + + SAVE(GAFR0_L); SAVE(GAFR0_U); + SAVE(GAFR1_L); SAVE(GAFR1_U); + SAVE(GAFR2_L); SAVE(GAFR2_U); + + SAVE(ICMR); + SAVE(CKEN); + SAVE(PSTR); +} + +static void pxa25x_cpu_pm_restore(unsigned long *sleep_save) +{ + /* restore registers */ + RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2); + RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); + RESTORE(GAFR0_L); RESTORE(GAFR0_U); + RESTORE(GAFR1_L); RESTORE(GAFR1_U); + RESTORE(GAFR2_L); RESTORE(GAFR2_U); + RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2); + RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2); + RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); + + RESTORE(CKEN); + RESTORE(ICMR); + RESTORE(PSTR); +} + +static void pxa25x_cpu_pm_enter(suspend_state_t state) { extern void pxa_cpu_suspend(unsigned int); extern void pxa_cpu_resume(void); @@ -126,10 +194,18 @@ void pxa_cpu_pm_enter(suspend_state_t state) } } -static struct pm_ops pxa25x_pm_ops = { - .enter = pxa_pm_enter, +static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = { + .save_size = SLEEP_SAVE_SIZE, .valid = pm_valid_only_mem, + .save = pxa25x_cpu_pm_save, + .restore = pxa25x_cpu_pm_restore, + .enter = pxa25x_cpu_pm_enter, }; + +static void __init pxa25x_init_pm(void) +{ + pxa_cpu_pm_fns = &pxa25x_cpu_pm_fns; +} #endif void __init pxa25x_init_irq(void) @@ -159,7 +235,7 @@ static int __init pxa25x_init(void) if ((ret = pxa_init_dma(16))) return ret; #ifdef CONFIG_PM - pm_set_ops(&pxa25x_pm_ops); + pxa25x_init_pm(); #endif ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index c85f0b01c326..9240d37e23fa 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -126,14 +126,109 @@ EXPORT_SYMBOL(get_lcdclk_frequency_10khz); #ifdef CONFIG_PM -void pxa_cpu_pm_enter(suspend_state_t state) +#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x +#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] + +#define RESTORE_GPLEVEL(n) do { \ + GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \ + GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \ +} while (0) + +/* + * List of global PXA peripheral registers to preserve. + * More ones like CP and general purpose register values are preserved + * with the stack pointer in sleep.S. + */ +enum { SLEEP_SAVE_START = 0, + + SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2, SLEEP_SAVE_GPLR3, + SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, SLEEP_SAVE_GPDR3, + SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, SLEEP_SAVE_GRER3, + SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, SLEEP_SAVE_GFER3, + SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3, + + SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U, + SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U, + SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U, + SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U, + + SLEEP_SAVE_PSTR, + + SLEEP_SAVE_ICMR, + SLEEP_SAVE_CKEN, + + SLEEP_SAVE_MDREFR, + SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER, + SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR, + + SLEEP_SAVE_SIZE +}; + +void pxa27x_cpu_pm_save(unsigned long *sleep_save) +{ + SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2); SAVE(GPLR3); + SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2); SAVE(GPDR3); + SAVE(GRER0); SAVE(GRER1); SAVE(GRER2); SAVE(GRER3); + SAVE(GFER0); SAVE(GFER1); SAVE(GFER2); SAVE(GFER3); + SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); SAVE(PGSR3); + + SAVE(GAFR0_L); SAVE(GAFR0_U); + SAVE(GAFR1_L); SAVE(GAFR1_U); + SAVE(GAFR2_L); SAVE(GAFR2_U); + SAVE(GAFR3_L); SAVE(GAFR3_U); + + SAVE(MDREFR); + SAVE(PWER); SAVE(PCFR); SAVE(PRER); + SAVE(PFER); SAVE(PKWR); + + SAVE(ICMR); ICMR = 0; + SAVE(CKEN); + SAVE(PSTR); + + /* Clear GPIO transition detect bits */ + GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2; GEDR3 = GEDR3; +} + +void pxa27x_cpu_pm_restore(unsigned long *sleep_save) +{ + /* ensure not to come back here if it wasn't intended */ + PSPR = 0; + + /* restore registers */ + RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); + RESTORE_GPLEVEL(2); RESTORE_GPLEVEL(3); + RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); RESTORE(GPDR3); + RESTORE(GAFR0_L); RESTORE(GAFR0_U); + RESTORE(GAFR1_L); RESTORE(GAFR1_U); + RESTORE(GAFR2_L); RESTORE(GAFR2_U); + RESTORE(GAFR3_L); RESTORE(GAFR3_U); + RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2); RESTORE(GRER3); + RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2); RESTORE(GFER3); + RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); RESTORE(PGSR3); + + RESTORE(MDREFR); + RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER); + RESTORE(PFER); RESTORE(PKWR); + + PSSR = PSSR_RDH | PSSR_PH; + + RESTORE(CKEN); + + ICLR = 0; + ICCR = 1; + RESTORE(ICMR); + RESTORE(PSTR); +} + +void pxa27x_cpu_pm_enter(suspend_state_t state) { extern void pxa_cpu_standby(void); extern void pxa_cpu_suspend(unsigned int); extern void pxa_cpu_resume(void); if (state == PM_SUSPEND_STANDBY) - CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER) | (1 << CKEN_LCD) | (1 << CKEN_PWM0); + CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER) | + (1 << CKEN_LCD) | (1 << CKEN_PWM0); else CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER); @@ -155,15 +250,23 @@ void pxa_cpu_pm_enter(suspend_state_t state) } } -static int pxa27x_pm_valid(suspend_state_t state) +static int pxa27x_cpu_pm_valid(suspend_state_t state) { return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY; } -static struct pm_ops pxa27x_pm_ops = { - .enter = pxa_pm_enter, - .valid = pxa27x_pm_valid, +static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = { + .save_size = SLEEP_SAVE_SIZE, + .save = pxa27x_cpu_pm_save, + .restore = pxa27x_cpu_pm_restore, + .valid = pxa27x_cpu_pm_valid, + .enter = pxa27x_cpu_pm_enter, }; + +static void __init pxa27x_init_pm(void) +{ + pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns; +} #endif /* @@ -249,7 +352,7 @@ static int __init pxa27x_init(void) if ((ret = pxa_init_dma(32))) return ret; #ifdef CONFIG_PM - pm_set_ops(&pxa27x_pm_ops); + pxa27x_init_pm(); #endif ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/include/asm-arm/arch-pxa/pm.h b/include/asm-arm/arch-pxa/pm.h index 52243a62c4e7..62b69004819d 100644 --- a/include/asm-arm/arch-pxa/pm.h +++ b/include/asm-arm/arch-pxa/pm.h @@ -7,5 +7,14 @@ * */ -extern int pxa_pm_prepare(suspend_state_t state); +struct pxa_cpu_pm_fns { + int save_size; + void (*save)(unsigned long *); + void (*restore)(unsigned long *); + int (*valid)(suspend_state_t state); + void (*enter)(suspend_state_t state); +}; + +extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; + extern int pxa_pm_enter(suspend_state_t state); From b750a09385d7c464113ae8915e63541a163fbac8 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 18 Jul 2007 11:40:13 +0100 Subject: [PATCH 25/60] [ARM] 4489/1: pxa: split pxa_cpu_suspend to processor specific ones 1. split pxa_cpu_suspend to pxa25x_cpu_suspend and pxa27x_cpu_suspend and make pxa25x_cpu_pm_enter() and pxa27x_cpu_pm_enter() to invoke the corresponding _suspend functions, thus remove all those ugly #ifdef .. #endif out of sleep.S 2. move the declarations of those suspend functions to pm.h note: this is not a clean enough solution until all the pxa25x and pxa27x specific part is further removed out of sleep.S, sleep.S is supposed to contain generic code only Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/pxa25x.c | 5 +- arch/arm/mach-pxa/pxa27x.c | 4 +- arch/arm/mach-pxa/sleep.S | 112 ++++++++++++++++++++++------------ include/asm-arm/arch-pxa/pm.h | 5 ++ 4 files changed, 80 insertions(+), 46 deletions(-) diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 1ec4bf1ff249..6dfcca72e90f 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -180,16 +180,13 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save) static void pxa25x_cpu_pm_enter(suspend_state_t state) { - extern void pxa_cpu_suspend(unsigned int); - extern void pxa_cpu_resume(void); - CKEN = 0; switch (state) { case PM_SUSPEND_MEM: /* set resume return address */ PSPR = virt_to_phys(pxa_cpu_resume); - pxa_cpu_suspend(PWRMODE_SLEEP); + pxa25x_cpu_suspend(PWRMODE_SLEEP); break; } } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 9240d37e23fa..203371ab19db 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -223,8 +223,6 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save) void pxa27x_cpu_pm_enter(suspend_state_t state) { extern void pxa_cpu_standby(void); - extern void pxa_cpu_suspend(unsigned int); - extern void pxa_cpu_resume(void); if (state == PM_SUSPEND_STANDBY) CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER) | @@ -245,7 +243,7 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) case PM_SUSPEND_MEM: /* set resume return address */ PSPR = virt_to_phys(pxa_cpu_resume); - pxa_cpu_suspend(PWRMODE_SLEEP); + pxa27x_cpu_suspend(PWRMODE_SLEEP); break; } } diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 15874b360e51..aff71fec618a 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -17,28 +17,12 @@ #include -#ifdef CONFIG_PXA27x // workaround for Errata 50 #define MDREFR_KDIV 0x200a4000 // all banks #define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0 -#endif .text -/* - * pxa_cpu_suspend() - * - * Forces CPU into sleep state. - * - * r0 = value for PWRMODE M field for desired sleep state - */ - -ENTRY(pxa_cpu_suspend) - -#ifndef CONFIG_IWMMXT - mra r2, r3, acc0 -#endif - stmfd sp!, {r2 - r12, lr} @ save registers on stack - +pxa_cpu_save_cp: @ get coprocessor registers mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode mrc p15, 0, r4, c15, c1, 0 @ CP access reg @@ -54,12 +38,36 @@ ENTRY(pxa_cpu_suspend) mov r10, sp stmfd sp!, {r3 - r10} - mov r5, r0 @ save sleep mode + mov pc, lr + +pxa_cpu_save_sp: @ preserve phys address of stack mov r0, sp + mov r2, lr bl sleep_phys_sp ldr r1, =sleep_save_sp str r0, [r1] + mov pc, r2 + +/* + * pxa27x_cpu_suspend() + * + * Forces CPU into sleep state. + * + * r0 = value for PWRMODE M field for desired sleep state + */ + +ENTRY(pxa27x_cpu_suspend) + +#ifndef CONFIG_IWMMXT + mra r2, r3, acc0 +#endif + stmfd sp!, {r2 - r12, lr} @ save registers on stack + + bl pxa_cpu_save_cp + + mov r5, r0 @ save sleep mode + bl pxa_cpu_save_sp @ clean data cache bl xscale_flush_kern_cache_all @@ -80,13 +88,55 @@ ENTRY(pxa_cpu_suspend) @ enable SDRAM self-refresh mode orr r5, r5, #MDREFR_SLFRSH -#ifdef CONFIG_PXA27x @ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50) ldr r6, =MDREFR_KDIV orr r5, r5, r6 -#endif -#ifdef CONFIG_PXA25x + @ Intel PXA270 Specification Update notes problems sleeping + @ with core operating above 91 MHz + @ (see Errata 50, ...processor does not exit from sleep...) + + ldr r6, =CCCR + ldr r8, [r6] @ keep original value for resume + + ldr r7, =CCCR_SLEEP @ prepare CCCR sleep value + mov r0, #0x2 @ prepare value for CLKCFG + + @ align execution to a cache line + b pxa_cpu_do_suspend + +/* + * pxa27x_cpu_suspend() + * + * Forces CPU into sleep state. + * + * r0 = value for PWRMODE M field for desired sleep state + */ + +ENTRY(pxa25x_cpu_suspend) + stmfd sp!, {r2 - r12, lr} @ save registers on stack + + bl pxa_cpu_save_cp + + mov r5, r0 @ save sleep mode + bl pxa_cpu_save_sp + + @ clean data cache + bl xscale_flush_kern_cache_all + + @ prepare value for sleep mode + mov r1, r5 @ sleep mode + + @ prepare pointer to physical address 0 (virtual mapping in generic.c) + mov r2, #UNCACHED_PHYS_0 + + @ prepare SDRAM refresh settings + ldr r4, =MDREFR + ldr r5, [r4] + + @ enable SDRAM self-refresh mode + orr r5, r5, #MDREFR_SLFRSH + @ Intel PXA255 Specification Update notes problems @ about suspending with PXBus operating above 133MHz @ (see Errata 31, GPIO output signals, ... unpredictable in sleep @@ -118,30 +168,15 @@ ENTRY(pxa_cpu_suspend) mov r0, #0 mcr p14, 0, r0, c6, c0, 0 orr r0, r0, #2 @ initiate change bit -#endif -#ifdef CONFIG_PXA27x - @ Intel PXA270 Specification Update notes problems sleeping - @ with core operating above 91 MHz - @ (see Errata 50, ...processor does not exit from sleep...) - - ldr r6, =CCCR - ldr r8, [r6] @ keep original value for resume - - ldr r7, =CCCR_SLEEP @ prepare CCCR sleep value - mov r0, #0x2 @ prepare value for CLKCFG -#endif - - @ align execution to a cache line - b 1f + b pxa_cpu_do_suspend .ltorg .align 5 -1: +pxa_cpu_do_suspend: @ All needed values are now in registers. @ These last instructions should be in cache -#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) @ initiate the frequency change... str r7, [r6] mcr p14, 0, r0, c6, c0, 0 @@ -155,7 +190,6 @@ ENTRY(pxa_cpu_suspend) mov r0, #42 10: subs r0, r0, #1 bne 10b -#endif @ Do not reorder... @ Intel PXA270 Specification Update notes problems performing diff --git a/include/asm-arm/arch-pxa/pm.h b/include/asm-arm/arch-pxa/pm.h index 62b69004819d..6903db7fae15 100644 --- a/include/asm-arm/arch-pxa/pm.h +++ b/include/asm-arm/arch-pxa/pm.h @@ -17,4 +17,9 @@ struct pxa_cpu_pm_fns { extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; +/* sleep.S */ +extern void pxa25x_cpu_suspend(unsigned int); +extern void pxa27x_cpu_suspend(unsigned int); +extern void pxa_cpu_resume(void); + extern int pxa_pm_enter(suspend_state_t state); From fe885fa2372b1d255974e71d5b7c51b1e9673835 Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Wed, 18 Jul 2007 21:04:00 +0100 Subject: [PATCH 26/60] [ARM] 4491/1: em7210 rtc clock The commit d815461c7a73903d0a926b3cace6f69e144c54a3 in linus tree converts the rtc-rs5c372 driver to a "new style" i2c driver. Like commit c00593f6f816e5cfa6d193a2561ca77541f71424, this patch register the rtc i2c device for the em7210 board. Signed-off-by: Arnaud Patard Signed-off-by: Russell King --- arch/arm/mach-iop32x/em7210.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c index f0362053fdcc..c947152f9a3c 100644 --- a/arch/arm/mach-iop32x/em7210.c +++ b/arch/arm/mach-iop32x/em7210.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -44,6 +45,15 @@ static struct sys_timer em7210_timer = { .offset = iop_gettimeoffset, }; +/* + * EM7210 RTC + */ +static struct i2c_board_info __initdata em7210_i2c_devices[] = { + { + I2C_BOARD_INFO("rtc-rs5c372", 0x32), + .type = "rs5c372a", + }, +}; /* * EM7210 I/O @@ -187,6 +197,9 @@ static void __init em7210_init_machine(void) platform_device_register(&iop3xx_dma_0_channel); platform_device_register(&iop3xx_dma_1_channel); + i2c_register_board_info(0, em7210_i2c_devices, + ARRAY_SIZE(em7210_i2c_devices)); + pm_power_off = em7210_power_off; } From 3d50527bbf1b68e5206263ade414f0d966b00f74 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 18 Jul 2007 11:31:46 +0100 Subject: [PATCH 27/60] [ARM] 4475/2: EM-x270 board support Signed-off-by: Mike Rapoport Signed-off-by: Russell King --- arch/arm/configs/em_x270_defconfig | 1265 ++++++++++++++++++++++++++++ arch/arm/mach-pxa/Kconfig | 4 + arch/arm/mach-pxa/Makefile | 1 + arch/arm/mach-pxa/em-x270.c | 354 ++++++++ 4 files changed, 1624 insertions(+) create mode 100644 arch/arm/configs/em_x270_defconfig create mode 100644 arch/arm/mach-pxa/em-x270.c diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig new file mode 100644 index 000000000000..6bea0901bdf0 --- /dev/null +++ b/arch/arm/configs/em_x270_defconfig @@ -0,0 +1,1265 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22 +# Mon Jul 9 15:18:20 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="-em-x270" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +CONFIG_MACH_EM_X270=y +CONFIG_PXA27x=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_APM_EMULATION=m + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +# CONFIG_BT_RFCOMM_TTY is not set +CONFIG_BT_BNEP=m +# CONFIG_BT_BNEP_MC_FILTER is not set +# CONFIG_BT_BNEP_PROTO_FILTER is not set +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +CONFIG_BT_HCIUART=m +# CONFIG_BT_HCIUART_H4 is not set +# CONFIG_BT_HCIUART_BCSP is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +# CONFIG_IEEE80211_CRYPT_TKIP is not set +# CONFIG_IEEE80211_SOFTMAC is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +# CONFIG_MTD_CFI_NOSWAP is not set +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_SHARPSL is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=12000 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +CONFIG_DM9000=y +# CONFIG_SMC911X is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_PXA27x=m +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Misc devices +# + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_AC97=m + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=m + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=m + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_V3020=m + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=m + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=y +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 5c0a10041cd1..5ebec6d88b51 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -37,6 +37,10 @@ config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" select PXA27x +config MACH_EM_X270 + bool "CompuLab EM-x270 platform" + select PXA27x + endchoice if PXA_SHARPSL diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 9093eb1c94eb..7d6ab5c59ab9 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o sp obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o obj-$(CONFIG_MACH_TOSA) += tosa.o +obj-$(CONFIG_MACH_EM_X270) += em-x270.o # Support for blinky lights led-y := leds.o diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c new file mode 100644 index 000000000000..3d0ad5065ee5 --- /dev/null +++ b/arch/arm/mach-pxa/em-x270.c @@ -0,0 +1,354 @@ +/* + * Support for CompuLab EM-x270 platform + * + * Copyright (C) 2007 CompuLab, Ltd. + * Author: Mike Rapoport + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +#include +#include + +#include + +#include + +#include +#include +#include +#include +#include + +#include "generic.h" + +/* GPIO IRQ usage */ +#define EM_X270_MMC_PD (105) +#define EM_X270_ETHIRQ IRQ_GPIO(41) +#define EM_X270_MMC_IRQ IRQ_GPIO(13) + +static struct resource em_x270_dm9k_resource[] = { + [0] = { + .start = PXA_CS2_PHYS, + .end = PXA_CS2_PHYS + 3, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_CS2_PHYS + 8, + .end = PXA_CS2_PHYS + 8 + 0x3f, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = EM_X270_ETHIRQ, + .end = EM_X270_ETHIRQ, + .flags = IORESOURCE_IRQ, + } +}; + +/* for the moment we limit ourselves to 32bit IO until some + * better IO routines can be written and tested + */ +static struct dm9000_plat_data em_x270_dm9k_platdata = { + .flags = DM9000_PLATF_32BITONLY, +}; + +/* Ethernet device */ +static struct platform_device em_x270_dm9k = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(em_x270_dm9k_resource), + .resource = em_x270_dm9k_resource, + .dev = { + .platform_data = &em_x270_dm9k_platdata, + } +}; + +/* audio device */ +static struct platform_device em_x270_audio = { + .name = "pxa2xx-ac97", + .id = -1, +}; + +/* WM9712 touchscreen controller. Hopefully the driver will make it to + * the mainstream sometime */ +static struct platform_device em_x270_ts = { + .name = "wm97xx-ts", + .id = -1, +}; + +/* RTC */ +static struct resource em_x270_v3020_resource[] = { + [0] = { + .start = PXA_CS4_PHYS, + .end = PXA_CS4_PHYS + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct v3020_platform_data em_x270_v3020_platdata = { + .leftshift = 0, +}; + +static struct platform_device em_x270_rtc = { + .name = "v3020", + .num_resources = ARRAY_SIZE(em_x270_v3020_resource), + .resource = em_x270_v3020_resource, + .id = -1, + .dev = { + .platform_data = &em_x270_v3020_platdata, + } +}; + +/* NAND flash */ +#define GPIO_NAND_CS (11) +#define GPIO_NAND_RB (56) + +static inline void nand_cs_on(void) +{ + GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS); +} + +static void nand_cs_off(void) +{ + dsb(); + + GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS); +} + +/* hardware specific access to control-lines */ +static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; + + dsb(); + + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_ALE) + nandaddr |= (1 << 3); + else + nandaddr &= ~(1 << 3); + if (ctrl & NAND_CLE) + nandaddr |= (1 << 2); + else + nandaddr &= ~(1 << 2); + if (ctrl & NAND_NCE) + nand_cs_on(); + else + nand_cs_off(); + } + + dsb(); + this->IO_ADDR_W = (void __iomem *)nandaddr; + if (dat != NAND_CMD_NONE) + writel(dat, this->IO_ADDR_W); + + dsb(); +} + +/* read device ready pin */ +static int em_x270_nand_device_ready(struct mtd_info *mtd) +{ + dsb(); + + return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB); +} + +static struct mtd_partition em_x270_partition_info[] = { + [0] = { + .name = "em_x270-0", + .offset = 0, + .size = SZ_4M, + }, + [1] = { + .name = "em_x270-1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, +}; + +static const char *em_x270_part_probes[] = { "cmdlinepart", NULL }; + +struct platform_nand_data em_x270_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(em_x270_partition_info), + .partitions = em_x270_partition_info, + .chip_delay = 20, + .part_probe_types = em_x270_part_probes, + }, + .ctrl = { + .hwcontrol = 0, + .dev_ready = em_x270_nand_device_ready, + .select_chip = 0, + .cmd_ctrl = em_x270_nand_cmd_ctl, + }, +}; + +static struct resource em_x270_nand_resource[] = { + [0] = { + .start = PXA_CS1_PHYS, + .end = PXA_CS1_PHYS + 12, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device em_x270_nand = { + .name = "gen_nand", + .num_resources = ARRAY_SIZE(em_x270_nand_resource), + .resource = em_x270_nand_resource, + .id = -1, + .dev = { + .platform_data = &em_x270_nand_platdata, + } +}; + +/* platform devices */ +static struct platform_device *platform_devices[] __initdata = { + &em_x270_dm9k, + &em_x270_audio, + &em_x270_ts, + &em_x270_rtc, + &em_x270_nand, +}; + + +/* PXA27x OHCI controller setup */ +static int em_x270_ohci_init(struct device *dev) +{ + /* Set the Power Control Polarity Low */ + UHCHR = (UHCHR | UHCHR_PCPL) & + ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE); + + /* enable port 2 transiever */ + UP2OCR = UP2OCR_HXS | UP2OCR_HXOE; + + return 0; +} + +static struct pxaohci_platform_data em_x270_ohci_platform_data = { + .port_mode = PMM_PERPORT_MODE, + .init = em_x270_ohci_init, +}; + + +static int em_x270_mci_init(struct device *dev, + irq_handler_t em_x270_detect_int, + void *data) +{ + int err; + + /* setup GPIO for PXA27x MMC controller */ + pxa_gpio_mode(GPIO32_MMCCLK_MD); + pxa_gpio_mode(GPIO112_MMCCMD_MD); + pxa_gpio_mode(GPIO92_MMCDAT0_MD); + pxa_gpio_mode(GPIO109_MMCDAT1_MD); + pxa_gpio_mode(GPIO110_MMCDAT2_MD); + pxa_gpio_mode(GPIO111_MMCDAT3_MD); + + /* EM-X270 uses GPIO13 as SD power enable */ + pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT); + + err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n", + __FUNCTION__, err); + return err; + } + + return 0; +} + +static void em_x270_mci_setpower(struct device *dev, unsigned int vdd) +{ + /* + FIXME: current hardware implementation does not allow to + enable/disable MMC power. This will be fixed in next HW releases, + and we'll need to add implmentation here. + */ + return; +} + +static void em_x270_mci_exit(struct device *dev, void *data) +{ + free_irq(EM_X270_MMC_IRQ, data); +} + +static struct pxamci_platform_data em_x270_mci_platform_data = { + .ocr_mask = MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31, + .init = em_x270_mci_init, + .setpower = em_x270_mci_setpower, + .exit = em_x270_mci_exit, +}; + +/* LCD 480x640 */ +static struct pxafb_mode_info em_x270_lcd_mode = { + .pixclock = 50000, + .bpp = 16, + .xres = 480, + .yres = 640, + .hsync_len = 8, + .vsync_len = 2, + .left_margin = 8, + .upper_margin = 0, + .right_margin = 24, + .lower_margin = 4, + .cmap_greyscale = 0, +}; + +static struct pxafb_mach_info em_x270_lcd = { + .modes = &em_x270_lcd_mode, + .num_modes = 1, + .cmap_inverse = 0, + .cmap_static = 0, + .lccr0 = LCCR0_PAS, + .lccr3 = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff), +}; + +static void __init em_x270_init(void) +{ + /* setup LCD */ + set_pxa_fb_info(&em_x270_lcd); + + /* register EM-X270 platform devices */ + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + + /* set MCI and OHCI platform parameters */ + pxa_set_mci_info(&em_x270_mci_platform_data); + pxa_set_ohci_info(&em_x270_ohci_platform_data); + + /* setup STUART GPIOs */ + pxa_gpio_mode(GPIO46_STRXD_MD); + pxa_gpio_mode(GPIO47_STTXD_MD); + + /* setup BTUART GPIOs */ + pxa_gpio_mode(GPIO42_BTRXD_MD); + pxa_gpio_mode(GPIO43_BTTXD_MD); + pxa_gpio_mode(GPIO44_BTCTS_MD); + pxa_gpio_mode(GPIO45_BTRTS_MD); + + /* Setup interrupt for dm9000 */ + set_irq_type(EM_X270_ETHIRQ, IRQT_RISING); +} + +MACHINE_START(EM_X270, "Compulab EM-x270") + .boot_params = 0xa0000100, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = em_x270_init, +MACHINE_END From 48da78bc93b087eadd8fa840ba661b9442846dee Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 11 Jul 2007 11:29:28 +0100 Subject: [PATCH 28/60] [ARM] 4471/1: Compile the uncompressing code with -fno-builtin This is to avoid a compiler warning for overriding the built-in "putc" function. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/boot/compressed/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index a1f1691b67fe..6b8cbd69f249 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -73,7 +73,7 @@ SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ targets := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \ head.o misc.o $(OBJS) -EXTRA_CFLAGS := -fpic +EXTRA_CFLAGS := -fpic -fno-builtin EXTRA_AFLAGS := # Supply ZRELADDR, INITRD_PHYS and PARAMS_PHYS to the decompressor via From f393e99d9e9540d9c5b3ebc42dfb0ff9a77827fe Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 20 Jul 2007 02:07:36 +0100 Subject: [PATCH 29/60] [ARM] 4496/1: elf_hwcap: fix up #include misplacement While bisecting an iop13xx compile failure I noticed that include/asm-arm/hwcap.h should be included from include/asm-arm/elf.h outside #ifndef __ASSEMBLY__ since hwcap.h has its own __ASSEMBLY__ protections. Cc: Catalin Marinas Signed-off-by: Dan Williams Signed-off-by: Russell King --- include/asm-arm/elf.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h index d7a777f05088..ec1c685562ce 100644 --- a/include/asm-arm/elf.h +++ b/include/asm-arm/elf.h @@ -1,13 +1,14 @@ #ifndef __ASMARM_ELF_H #define __ASMARM_ELF_H +#include + #ifndef __ASSEMBLY__ /* * ELF register definitions.. */ #include #include -#include typedef unsigned long elf_greg_t; typedef unsigned long elf_freg_t[3]; From cdcb81f7d99f3d525003068b84445dd4acc63266 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Jul 2007 10:32:46 +0100 Subject: [PATCH 30/60] [ARM] Allow neponset to build again Signed-off-by: Russell King --- arch/arm/mach-sa1100/neponset.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 3a0a1ee2542d..9f1ed1509301 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -292,6 +292,8 @@ static struct platform_device *devices[] __initdata = { &smc91x_device, }; +extern void sa1110_mb_disable(void); + static int __init neponset_init(void) { platform_driver_register(&neponset_device_driver); From 13d5fadf45d12786b90916e95e97f593e91aaf0a Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Jul 2007 10:36:05 +0100 Subject: [PATCH 31/60] [ARM] Make 'i' and 'zi' targets work The 'i' and 'zi' targets short-circuit the dependencies for 'install' and 'zinstall' targets; these are useful for installing the kernel on platforms which have make but no compiler installed. Signed-off-by: Russell King --- arch/arm/boot/Makefile | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index ec9c400c7f82..25f12303b106 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -91,4 +91,12 @@ zinstall: $(obj)/zImage $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ $(obj)/zImage System.map "$(INSTALL_PATH)" +zi: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(obj)/zImage System.map "$(INSTALL_PATH)" + +i: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(obj)/Image System.map "$(INSTALL_PATH)" + subdir- := bootp compressed From 8b801ead3d7ab3cce991ea3a2d00c7336215fc7d Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Jul 2007 10:38:54 +0100 Subject: [PATCH 32/60] [ARM] rpc: update Acorn SCSI drivers to modern ecard interfaces Signed-off-by: Russell King --- drivers/scsi/arm/cumana_1.c | 209 +++++++++++++++++------------------- drivers/scsi/arm/ecoscsi.c | 154 ++++++++------------------ drivers/scsi/arm/oak.c | 74 +++++++------ 3 files changed, 187 insertions(+), 250 deletions(-) diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c index cf9a21cea6d9..49d838e90a24 100644 --- a/drivers/scsi/arm/cumana_1.c +++ b/drivers/scsi/arm/cumana_1.c @@ -24,7 +24,7 @@ #define CUMANASCSI_PUBLIC_RELEASE 1 -#define NCR5380_implementation_fields int port, ctrl +#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata) #define NCR5380_local_declare() struct Scsi_Host *_instance #define NCR5380_setup(instance) _instance = instance #define NCR5380_read(reg) cumanascsi_read(_instance, reg) @@ -33,6 +33,11 @@ #define NCR5380_queue_command cumanascsi_queue_command #define NCR5380_proc_info cumanascsi_proc_info +#define NCR5380_implementation_fields \ + unsigned ctrl; \ + void __iomem *base; \ + void __iomem *dma + #define BOARD_NORMAL 0 #define BOARD_NCR53C400 1 @@ -47,193 +52,163 @@ const char *cumanascsi_info(struct Scsi_Host *spnt) return ""; } -#ifdef NOT_EFFICIENT -#define CTRL(p,v) outb(*ctrl = (v), (p) - 577) -#define STAT(p) inb((p)+1) -#define IN(p) inb((p)) -#define OUT(v,p) outb((v), (p)) -#else -#define CTRL(p,v) (p[-2308] = (*ctrl = (v))) -#define STAT(p) (p[4]) -#define IN(p) (*(p)) -#define IN2(p) ((unsigned short)(*(volatile unsigned long *)(p))) -#define OUT(v,p) (*(p) = (v)) -#define OUT2(v,p) (*((volatile unsigned long *)(p)) = (v)) -#endif -#define L(v) (((v)<<16)|((v) & 0x0000ffff)) -#define H(v) (((v)>>16)|((v) & 0xffff0000)) +#define CTRL 0x16fc +#define STAT 0x2004 +#define L(v) (((v)<<16)|((v) & 0x0000ffff)) +#define H(v) (((v)>>16)|((v) & 0xffff0000)) static inline int -NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *addr, int len) +NCR5380_pwrite(struct Scsi_Host *host, unsigned char *addr, int len) { - int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; - int oldctrl = *ctrl; unsigned long *laddr; -#ifdef NOT_EFFICIENT - int iobase = instance->io_port; - int dma_io = iobase & ~(0x3C0000>>2); -#else - volatile unsigned char *iobase = (unsigned char *)ioaddr(instance->io_port); - volatile unsigned char *dma_io = (unsigned char *)((int)iobase & ~0x3C0000); -#endif + void __iomem *dma = priv(host)->dma + 0x2000; if(!len) return 0; - CTRL(iobase, 0x02); + writeb(0x02, priv(host)->base + CTRL); laddr = (unsigned long *)addr; while(len >= 32) { - int status; + unsigned int status; unsigned long v; - status = STAT(iobase); + status = readb(priv(host)->base + STAT); if(status & 0x80) goto end; if(!(status & 0x40)) continue; - v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); - v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); - v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); - v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); - v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); - v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); - v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); - v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io); + v=*laddr++; writew(L(v), dma); writew(H(v), dma); + v=*laddr++; writew(L(v), dma); writew(H(v), dma); + v=*laddr++; writew(L(v), dma); writew(H(v), dma); + v=*laddr++; writew(L(v), dma); writew(H(v), dma); + v=*laddr++; writew(L(v), dma); writew(H(v), dma); + v=*laddr++; writew(L(v), dma); writew(H(v), dma); + v=*laddr++; writew(L(v), dma); writew(H(v), dma); + v=*laddr++; writew(L(v), dma); writew(H(v), dma); len -= 32; if(len == 0) break; } addr = (unsigned char *)laddr; - CTRL(iobase, 0x12); + writeb(0x12, priv(host)->base + CTRL); + while(len > 0) { - int status; - status = STAT(iobase); + unsigned int status; + status = readb(priv(host)->base + STAT); if(status & 0x80) goto end; if(status & 0x40) { - OUT(*addr++, dma_io); + writeb(*addr++, dma); if(--len == 0) break; } - status = STAT(iobase); + status = readb(priv(host)->base + STAT); if(status & 0x80) goto end; if(status & 0x40) { - OUT(*addr++, dma_io); + writeb(*addr++, dma); if(--len == 0) break; } } end: - CTRL(iobase, oldctrl|0x40); + writeb(priv(host)->ctrl | 0x40, priv(host)->base + CTRL); return len; } static inline int -NCR5380_pread(struct Scsi_Host *instance, unsigned char *addr, int len) +NCR5380_pread(struct Scsi_Host *host, unsigned char *addr, int len) { - int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; - int oldctrl = *ctrl; unsigned long *laddr; -#ifdef NOT_EFFICIENT - int iobase = instance->io_port; - int dma_io = iobase & ~(0x3C0000>>2); -#else - volatile unsigned char *iobase = (unsigned char *)ioaddr(instance->io_port); - volatile unsigned char *dma_io = (unsigned char *)((int)iobase & ~0x3C0000); -#endif + void __iomem *dma = priv(host)->dma + 0x2000; if(!len) return 0; - CTRL(iobase, 0x00); + writeb(0x00, priv(host)->base + CTRL); laddr = (unsigned long *)addr; while(len >= 32) { - int status; - status = STAT(iobase); + unsigned int status; + status = readb(priv(host)->base + STAT); if(status & 0x80) goto end; if(!(status & 0x40)) continue; - *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); - *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); - *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); - *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); - *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); - *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); - *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); - *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16); + *laddr++ = readw(dma) | (readw(dma) << 16); + *laddr++ = readw(dma) | (readw(dma) << 16); + *laddr++ = readw(dma) | (readw(dma) << 16); + *laddr++ = readw(dma) | (readw(dma) << 16); + *laddr++ = readw(dma) | (readw(dma) << 16); + *laddr++ = readw(dma) | (readw(dma) << 16); + *laddr++ = readw(dma) | (readw(dma) << 16); + *laddr++ = readw(dma) | (readw(dma) << 16); len -= 32; if(len == 0) break; } addr = (unsigned char *)laddr; - CTRL(iobase, 0x10); + writeb(0x10, priv(host)->base + CTRL); + while(len > 0) { - int status; - status = STAT(iobase); + unsigned int status; + status = readb(priv(host)->base + STAT); if(status & 0x80) goto end; if(status & 0x40) { - *addr++ = IN(dma_io); + *addr++ = readb(dma); if(--len == 0) break; } - status = STAT(iobase); + status = readb(priv(host)->base + STAT); if(status & 0x80) goto end; if(status & 0x40) { - *addr++ = IN(dma_io); + *addr++ = readb(dma); if(--len == 0) break; } } end: - CTRL(iobase, oldctrl|0x40); + writeb(priv(host)->ctrl | 0x40, priv(host)->base + CTRL); return len; } -#undef STAT -#undef CTRL -#undef IN -#undef OUT - -#define CTRL(p,v) outb(*ctrl = (v), (p) - 577) - -static char cumanascsi_read(struct Scsi_Host *instance, int reg) +static unsigned char cumanascsi_read(struct Scsi_Host *host, unsigned int reg) { - unsigned int iobase = instance->io_port; - int i; - int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; + void __iomem *base = priv(host)->base; + unsigned char val; - CTRL(iobase, 0); - i = inb(iobase + 64 + reg); - CTRL(iobase, 0x40); + writeb(0, base + CTRL); - return i; + val = readb(base + 0x2100 + (reg << 2)); + + priv(host)->ctrl = 0x40; + writeb(0x40, base + CTRL); + + return val; } -static void cumanascsi_write(struct Scsi_Host *instance, int reg, int value) +static void cumanascsi_write(struct Scsi_Host *host, unsigned int reg, unsigned int value) { - int iobase = instance->io_port; - int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; + void __iomem *base = priv(host)->base; - CTRL(iobase, 0); - outb(value, iobase + 64 + reg); - CTRL(iobase, 0x40); + writeb(0, base + CTRL); + + writeb(value, base + 0x2100 + (reg << 2)); + + priv(host)->ctrl = 0x40; + writeb(0x40, base + CTRL); } -#undef CTRL - #include "../NCR5380.c" static struct scsi_host_template cumanascsi_template = { @@ -256,32 +231,46 @@ static int __devinit cumanascsi1_probe(struct expansion_card *ec, const struct ecard_id *id) { struct Scsi_Host *host; - int ret = -ENOMEM; + int ret; - host = scsi_host_alloc(&cumanascsi_template, sizeof(struct NCR5380_hostdata)); - if (!host) + ret = ecard_request_resources(ec); + if (ret) goto out; - host->io_port = ecard_address(ec, ECARD_IOC, ECARD_SLOW) + 0x800; + host = scsi_host_alloc(&cumanascsi_template, sizeof(struct NCR5380_hostdata)); + if (!host) { + ret = -ENOMEM; + goto out_release; + } + + priv(host)->base = ioremap(ecard_resource_start(ec, ECARD_RES_IOCSLOW), + ecard_resource_len(ec, ECARD_RES_IOCSLOW)); + priv(host)->dma = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC), + ecard_resource_len(ec, ECARD_RES_MEMC)); + if (!priv(host)->base || !priv(host)->dma) { + ret = -ENOMEM; + goto out_unmap; + } + host->irq = ec->irq; NCR5380_init(host, 0); + priv(host)->ctrl = 0; + writeb(0, priv(host)->base + CTRL); + host->n_io_port = 255; if (!(request_region(host->io_port, host->n_io_port, "CumanaSCSI-1"))) { ret = -EBUSY; - goto out_free; + goto out_unmap; } - ((struct NCR5380_hostdata *)host->hostdata)->ctrl = 0; - outb(0x00, host->io_port - 577); - ret = request_irq(host->irq, cumanascsi_intr, IRQF_DISABLED, "CumanaSCSI-1", host); if (ret) { printk("scsi%d: IRQ%d not free: %d\n", host->host_no, host->irq, ret); - goto out_release; + goto out_unmap; } printk("scsi%d: at port 0x%08lx irq %d", @@ -301,10 +290,12 @@ cumanascsi1_probe(struct expansion_card *ec, const struct ecard_id *id) out_free_irq: free_irq(host->irq, host); - out_release: - release_region(host->io_port, host->n_io_port); - out_free: + out_unmap: + iounmap(priv(host)->base); + iounmap(priv(host)->dma); scsi_host_put(host); + out_release: + ecard_release_resources(ec); out: return ret; } @@ -318,8 +309,10 @@ static void __devexit cumanascsi1_remove(struct expansion_card *ec) scsi_remove_host(host); free_irq(host->irq, host); NCR5380_exit(host); - release_region(host->io_port, host->n_io_port); + iounmap(priv(host)->base); + iounmap(priv(host)->dma); scsi_host_put(host); + ecard_release_resources(ec); } static const struct ecard_id cumanascsi1_cids[] = { diff --git a/drivers/scsi/arm/ecoscsi.c b/drivers/scsi/arm/ecoscsi.c index 378e7af0c5d6..5265a9884338 100644 --- a/drivers/scsi/arm/ecoscsi.c +++ b/drivers/scsi/arm/ecoscsi.c @@ -34,35 +34,25 @@ #include "../scsi.h" #include -#define NCR5380_implementation_fields int port, ctrl -#define NCR5380_local_declare() struct Scsi_Host *_instance -#define NCR5380_setup(instance) _instance = instance +#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata) -#define NCR5380_read(reg) ecoscsi_read(_instance, reg) -#define NCR5380_write(reg, value) ecoscsi_write(_instance, reg, value) +#define NCR5380_local_declare() void __iomem *_base +#define NCR5380_setup(host) _base = priv(host)->base + +#define NCR5380_read(reg) ({ writeb(reg | 8, _base); readb(_base + 4); }) +#define NCR5380_write(reg, value) ({ writeb(reg | 8, _base); writeb(value, _base + 4); }) #define NCR5380_intr ecoscsi_intr #define NCR5380_queue_command ecoscsi_queue_command #define NCR5380_proc_info ecoscsi_proc_info +#define NCR5380_implementation_fields \ + void __iomem *base + #include "../NCR5380.h" #define ECOSCSI_PUBLIC_RELEASE 1 -static char ecoscsi_read(struct Scsi_Host *instance, int reg) -{ - int iobase = instance->io_port; - outb(reg | 8, iobase); - return inb(iobase + 1); -} - -static void ecoscsi_write(struct Scsi_Host *instance, int reg, int value) -{ - int iobase = instance->io_port; - outb(reg | 8, iobase); - outb(value, iobase + 1); -} - /* * Function : ecoscsi_setup(char *str, int *ints) * @@ -82,73 +72,6 @@ const char * ecoscsi_info (struct Scsi_Host *spnt) return ""; } -#if 0 -#define STAT(p) inw(p + 144) - -static inline int NCR5380_pwrite(struct Scsi_Host *host, unsigned char *addr, - int len) -{ - int iobase = host->io_port; -printk("writing %p len %d\n",addr, len); - if(!len) return -1; - - while(1) - { - int status; - while(((status = STAT(iobase)) & 0x100)==0); - } -} - -static inline int NCR5380_pread(struct Scsi_Host *host, unsigned char *addr, - int len) -{ - int iobase = host->io_port; - int iobase2= host->io_port + 0x100; - unsigned char *start = addr; - int s; -printk("reading %p len %d\n",addr, len); - outb(inb(iobase + 128), iobase + 135); - while(len > 0) - { - int status,b,i, timeout; - timeout = 0x07FFFFFF; - while(((status = STAT(iobase)) & 0x100)==0) - { - timeout--; - if(status & 0x200 || !timeout) - { - printk("status = %p\n",status); - outb(0, iobase + 135); - return 1; - } - } - if(len >= 128) - { - for(i=0; i<64; i++) - { - b = inw(iobase + 136); - *addr++ = b; - *addr++ = b>>8; - } - len -= 128; - } - else - { - b = inw(iobase + 136); - *addr ++ = b; - len -= 1; - if(len) - *addr ++ = b>>8; - len -= 1; - } - } - outb(0, iobase + 135); - printk("first bytes = %02X %02X %02X %20X %02X %02X %02X\n",*start, start[1], start[2], start[3], start[4], start[5], start[6]); - return 1; -} -#endif -#undef STAT - #define BOARD_NORMAL 0 #define BOARD_NCR53C400 1 @@ -173,26 +96,37 @@ static struct Scsi_Host *host; static int __init ecoscsi_init(void) { + void __iomem *_base; + int ret; + + if (!request_mem_region(0x33a0000, 4096, "ecoscsi")) { + ret = -EBUSY; + goto out; + } + + _base = ioremap(0x33a0000, 4096); + if (!_base) { + ret = -ENOMEM; + goto out_release; + } + + NCR5380_write(MODE_REG, 0x20); /* Is it really SCSI? */ + if (NCR5380_read(MODE_REG) != 0x20) /* Write to a reg. */ + goto out_unmap; + + NCR5380_write(MODE_REG, 0x00); /* it back. */ + if (NCR5380_read(MODE_REG) != 0x00) + goto out_unmap; host = scsi_host_alloc(tpnt, sizeof(struct NCR5380_hostdata)); - if (!host) - return 0; + if (!host) { + ret = -ENOMEM; + goto out_unmap; + } - host->io_port = 0x80ce8000; - host->n_io_port = 144; + priv(host)->base = _base; host->irq = IRQ_NONE; - if (!(request_region(host->io_port, host->n_io_port, "ecoscsi")) ) - goto unregister_scsi; - - ecoscsi_write(host, MODE_REG, 0x20); /* Is it really SCSI? */ - if (ecoscsi_read(host, MODE_REG) != 0x20) /* Write to a reg. */ - goto release_reg; - - ecoscsi_write(host, MODE_REG, 0x00 ); /* it back. */ - if (ecoscsi_read(host, MODE_REG) != 0x00) - goto release_reg; - NCR5380_init(host, 0); printk("scsi%d: at port 0x%08lx irqs disabled", host->host_no, host->io_port); @@ -206,24 +140,20 @@ static int __init ecoscsi_init(void) scsi_scan_host(host); return 0; -release_reg: - release_region(host->io_port, host->n_io_port); -unregister_scsi: - scsi_host_put(host); - return -ENODEV; + out_unmap: + iounmap(_base); + out_release: + release_mem_region(0x33a0000, 4096); + out: + return ret; } static void __exit ecoscsi_exit(void) { scsi_remove_host(host); - - if (shpnt->irq != IRQ_NONE) - free_irq(shpnt->irq, NULL); NCR5380_exit(host); - if (shpnt->io_port) - release_region(shpnt->io_port, shpnt->n_io_port); - scsi_host_put(host); + release_mem_region(0x33a0000, 4096); return 0; } diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c index c21b8392c928..849cdf89f7bb 100644 --- a/drivers/scsi/arm/oak.c +++ b/drivers/scsi/arm/oak.c @@ -23,15 +23,18 @@ #define OAKSCSI_PUBLIC_RELEASE 1 -#define NCR5380_read(reg) oakscsi_read(_instance, reg) -#define NCR5380_write(reg, value) oakscsi_write(_instance, reg, value) +#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata) +#define NCR5380_local_declare() void __iomem *_base +#define NCR5380_setup(host) _base = priv(host)->base + +#define NCR5380_read(reg) readb(_base + ((reg) << 2)) +#define NCR5380_write(reg, value) writeb(value, _base + ((reg) << 2)) #define NCR5380_intr oakscsi_intr #define NCR5380_queue_command oakscsi_queue_command #define NCR5380_proc_info oakscsi_proc_info -#define NCR5380_implementation_fields int port, ctrl -#define NCR5380_local_declare() struct Scsi_Host *_instance -#define NCR5380_setup(instance) _instance = instance +#define NCR5380_implementation_fields \ + void __iomem *base #define BOARD_NORMAL 0 #define BOARD_NCR53C400 1 @@ -39,60 +42,62 @@ #include "../NCR5380.h" #undef START_DMA_INITIATOR_RECEIVE_REG -#define START_DMA_INITIATOR_RECEIVE_REG (7 + 128) +#define START_DMA_INITIATOR_RECEIVE_REG (128 + 7) const char * oakscsi_info (struct Scsi_Host *spnt) { return ""; } -#define STAT(p) inw(p + 144) -extern void inswb(int from, void *to, int len); +#define STAT ((128 + 16) << 2) +#define DATA ((128 + 8) << 2) static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *addr, int len) { - int iobase = instance->io_port; + void __iomem *base = priv(instance)->base; + printk("writing %p len %d\n",addr, len); if(!len) return -1; while(1) { int status; - while(((status = STAT(iobase)) & 0x100)==0); + while (((status = readw(base + STAT)) & 0x100)==0); } } static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *addr, int len) { - int iobase = instance->io_port; + void __iomem *base = priv(instance)->base; printk("reading %p len %d\n", addr, len); while(len > 0) { - int status, timeout; + unsigned int status, timeout; unsigned long b; timeout = 0x01FFFFFF; - while(((status = STAT(iobase)) & 0x100)==0) + while (((status = readw(base + STAT)) & 0x100)==0) { timeout--; if(status & 0x200 || !timeout) { - printk("status = %08X\n",status); + printk("status = %08X\n", status); return 1; } } + if(len >= 128) { - inswb(iobase + 136, addr, 128); + readsw(base + DATA, addr, 128); addr += 128; len -= 128; } else { - b = (unsigned long) inw(iobase + 136); + b = (unsigned long) readw(base + DATA); *addr ++ = b; len -= 1; if(len) @@ -103,10 +108,8 @@ printk("reading %p len %d\n", addr, len); return 0; } -#define oakscsi_read(instance,reg) (inb((instance)->io_port + (reg))) -#define oakscsi_write(instance,reg,val) (outb((val), (instance)->io_port + (reg))) - #undef STAT +#undef DATA #include "../NCR5380.c" @@ -132,18 +135,26 @@ oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id) struct Scsi_Host *host; int ret = -ENOMEM; - host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata)); - if (!host) + ret = ecard_request_resources(ec); + if (ret) goto out; - host->io_port = ecard_address(ec, ECARD_MEMC, 0); + host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata)); + if (!host) { + ret = -ENOMEM; + goto release; + } + + priv(host)->base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC), + ecard_resource_len(ec, ECARD_RES_MEMC)); + if (!priv(host)->base) { + ret = -ENOMEM; + goto unreg; + } + host->irq = IRQ_NONE; host->n_io_port = 255; - ret = -EBUSY; - if (!request_region (host->io_port, host->n_io_port, "Oak SCSI")) - goto unreg; - NCR5380_init(host, 0); printk("scsi%d: at port 0x%08lx irqs disabled", @@ -156,15 +167,17 @@ oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id) ret = scsi_add_host(host, &ec->dev); if (ret) - goto out_release; + goto out_unmap; scsi_scan_host(host); goto out; - out_release: - release_region(host->io_port, host->n_io_port); + out_unmap: + iounmap(priv(host)->base); unreg: scsi_host_put(host); + release: + ecard_release_resources(ec); out: return ret; } @@ -177,8 +190,9 @@ static void __devexit oakscsi_remove(struct expansion_card *ec) scsi_remove_host(host); NCR5380_exit(host); - release_region(host->io_port, host->n_io_port); + iounmap(priv(host)->base); scsi_host_put(host); + ecard_release_resources(ec); } static const struct ecard_id oakscsi_cids[] = { From 13a63ab289627e977a045864b36792cf0b61364a Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Jul 2007 10:44:02 +0100 Subject: [PATCH 33/60] [ARM] rpc: convert an outb() to writeb() Signed-off-by: Russell King --- arch/arm/mach-rpc/riscpc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index 570cf937e73b..a454451c97c3 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -87,7 +87,7 @@ static void __init rpc_map_io(void) /* * Turn off floppy. */ - outb(0xc, 0x3f2); + writeb(0xc, PCIO_BASE + (0x3f2 << 2)); /* * RiscPC can't handle half-word loads and stores From 0762097625711e829a008b64f42dc0ec74abb284 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jul 2007 11:42:40 +0100 Subject: [PATCH 34/60] [ARM] 4500/1: Add locking around the background L2x0 cache operations The background operations of the L2x0 cache controllers are aborted if another operation is issued on the same or different core. This patch protects the maintenance operation issuing/polling with a spinlock. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/cache-l2x0.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 08a36f1b35d2..b4e9b734e0bd 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -17,6 +17,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include +#include #include #include @@ -25,14 +26,19 @@ #define CACHE_LINE_SIZE 32 static void __iomem *l2x0_base; +static DEFINE_SPINLOCK(l2x0_lock); static inline void sync_writel(unsigned long val, unsigned long reg, unsigned long complete_mask) { + unsigned long flags; + + spin_lock_irqsave(&l2x0_lock, flags); writel(val, l2x0_base + reg); /* wait for the operation to complete */ while (readl(l2x0_base + reg) & complete_mask) ; + spin_unlock_irqrestore(&l2x0_lock, flags); } static inline void cache_sync(void) From 367afaf83b0a8886ea566638a865701c54710af9 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jul 2007 11:42:51 +0100 Subject: [PATCH 35/60] [ARM] 4501/1: nommu: Select TLS register emulation if ARMv6 and not v6K If not MMU and not v6K, access to the TLS register has to be emulated. MMU-less systems do not provide a high page for kuser helpers. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e7904bc92c73..cccacd9c95af 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -405,6 +405,7 @@ config CPU_32v5 config CPU_32v6 bool + select TLS_REG_EMUL if !CPU_32v6K && !MMU config CPU_32v7 bool From 2a0cc6885f34a8f1de195f718b9f51ece6923b80 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jul 2007 11:42:46 +0100 Subject: [PATCH 36/60] [ARM] 4502/1: nommu: Do not export the copy/clear user page functions The __cpu_{clear|copy}_user_page functions are not defined for the MMU-less case and therefore should not be exported. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/proc-syms.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index 9f396b4fa0b7..2b5ba396e3a6 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -31,12 +31,14 @@ EXPORT_SYMBOL(__cpuc_coherent_kern_range); EXPORT_SYMBOL(cpu_cache); #endif +#ifdef CONFIG_MMU #ifndef MULTI_USER EXPORT_SYMBOL(__cpu_clear_user_page); EXPORT_SYMBOL(__cpu_copy_user_page); #else EXPORT_SYMBOL(cpu_user); #endif +#endif /* * No module should need to touch the TLB (and currently From 7b4c965a0b74748269d05185a394c9dc121dd558 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jul 2007 11:42:57 +0100 Subject: [PATCH 37/60] [ARM] 4504/1: nommu: Fix the ARMv6 support for MMU-less platforms With this patch, Kconfig only selects CPU_HAS_ASID for the MMU case. It also corrects the typo in the v6wbi_tlb_fns definition in pgtable-nommu.h. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 2 +- include/asm-arm/pgtable-nommu.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index cccacd9c95af..d377376d6eed 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -351,7 +351,7 @@ config CPU_V6 select CPU_CACHE_V6 select CPU_CACHE_VIPT select CPU_CP15_MMU - select CPU_HAS_ASID + select CPU_HAS_ASID if MMU select CPU_COPY_V6 if MMU select CPU_TLB_V6 if MMU diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h index 0c8be19fd66b..1cf14d243e82 100644 --- a/include/asm-arm/pgtable-nommu.h +++ b/include/asm-arm/pgtable-nommu.h @@ -102,7 +102,7 @@ extern int is_in_rom(unsigned long); #define v4_tlb_fns (0) #define v4wb_tlb_fns (0) #define v4wbi_tlb_fns (0) -#define v6_tlb_fns (0) +#define v6wbi_tlb_fns (0) #define v3_user_fns (0) #define v4_user_fns (0) From 69ebb22277a53f612ccd632ceb73ed87c9093412 Mon Sep 17 00:00:00 2001 From: Kristoffer Ericson Date: Fri, 20 Jul 2007 18:22:57 +0100 Subject: [PATCH 38/60] [ARM] 4506/1: HP Jornada 7XX: Addition of SSP Platform Driver These patches add full SSP/MCU support for the HP Jornada 720 machine. Its needed to handle keyboard, touchscreen, battery and backlight/lcd. The main driver exports functions and the header file exports the command values. When talking to the MCU the general procedure is to start MCU, send command (using ssp_inout(command)), the proper reply is always TXDUMMY. After receiving TXDUMMY you can send the value you wish pushed (for example brightness level). End with ssp_end() so the spinlock gets unlocked. Drivers using this havent been implemented yet, but will shortly. Signed-off-by: Kristoffer Ericson Signed-off-by: Russell King --- arch/arm/mach-sa1100/Kconfig | 13 +- arch/arm/mach-sa1100/Makefile | 2 + arch/arm/mach-sa1100/jornada720_ssp.c | 201 +++++++++++++++++++++++ include/asm-arm/arch-sa1100/jornada720.h | 27 +++ 4 files changed, 241 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-sa1100/jornada720_ssp.c create mode 100644 include/asm-arm/arch-sa1100/jornada720.h diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index cd67ab1b217b..f99d9013905f 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -101,6 +101,16 @@ config SA1100_JORNADA720 handheld computer. See for details. +config SA1100_JORNADA720_SSP + bool "HP Jornada 720 Extended SSP driver" + select SA1100_SSP + depends on SA1100_JORNADA720 + help + Say Y here if you have a HP Jornada 7xx handheld computer and you + want to access devices connected to the MCU. Those include the + keyboard, touchscreen, backlight and battery. This driver also activates + the generic SSP which it extends. + config SA1100_HACKKIT bool "HackKit Core CPU Board" help @@ -145,8 +155,7 @@ config SA1100_SSP help Say Y here to enable support for the generic PIO SSP driver. This isn't for audio support, but for attached sensors and - other devices, eg for BadgePAD 4 sensor support, or Jornada - 720 touchscreen support. + other devices, eg for BadgePAD 4 sensor support. config H3600_SLEEVE tristate "Compaq iPAQ Handheld sleeve support" diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index e27f15042a22..7a61e8d33ab7 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o led-$(CONFIG_SA1100_HACKKIT) += leds-hackkit.o obj-$(CONFIG_SA1100_JORNADA720) += jornada720.o +obj-$(CONFIG_SA1100_JORNADA720_SSP) += jornada720_ssp.o obj-$(CONFIG_SA1100_LART) += lart.o led-$(CONFIG_SA1100_LART) += leds-lart.o @@ -51,3 +52,4 @@ obj-$(CONFIG_LEDS) += $(led-y) # Miscelaneous functions obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_SA1100_SSP) += ssp.o + diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c new file mode 100644 index 000000000000..0a45e1ac8ad6 --- /dev/null +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -0,0 +1,201 @@ +/** + * arch/arm/mac-sa1100/jornada720_ssp.c + * + * Copyright (C) 2006/2007 Kristoffer Ericson + * Copyright (C) 2006 Filip Zyzniewski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * SSP driver for the HP Jornada 710/720/728 + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static DEFINE_SPINLOCK(jornada_ssp_lock); +static unsigned long jornada_ssp_flags; + +/** + * jornada_ssp_reverse - reverses input byte + * + * we need to reverse all data we recieve from the mcu due to its physical location + * returns : 01110111 -> 11101110 + */ +u8 inline jornada_ssp_reverse(u8 byte) +{ + return + ((0x80 & byte) >> 7) | + ((0x40 & byte) >> 5) | + ((0x20 & byte) >> 3) | + ((0x10 & byte) >> 1) | + ((0x08 & byte) << 1) | + ((0x04 & byte) << 3) | + ((0x02 & byte) << 5) | + ((0x01 & byte) << 7); +}; +EXPORT_SYMBOL(jornada_ssp_reverse); + +/** + * jornada_ssp_byte - waits for ready ssp bus and sends byte + * + * waits for fifo buffer to clear and then transmits, if it doesn't then we will + * timeout after rounds. Needs mcu running before its called. + * + * returns : %mcu output on success + * : %-ETIMEOUT on timeout + */ +int jornada_ssp_byte(u8 byte) +{ + int timeout = 400000; + u16 ret; + + while ((GPLR & GPIO_GPIO10)) { + if (!--timeout) { + printk(KERN_WARNING "SSP: timeout while waiting for transmit\n"); + return -ETIMEDOUT; + } + cpu_relax(); + } + + ret = jornada_ssp_reverse(byte) << 8; + + ssp_write_word(ret); + ssp_read_word(&ret); + + return jornada_ssp_reverse(ret); +}; +EXPORT_SYMBOL(jornada_ssp_byte); + +/** + * jornada_ssp_inout - decide if input is command or trading byte + * + * returns : (jornada_ssp_byte(byte)) on success + * : %-ETIMEOUT on timeout failure + */ +int jornada_ssp_inout(u8 byte) +{ + int ret, i; + + /* true means command byte */ + if (byte != TXDUMMY) { + ret = jornada_ssp_byte(byte); + /* Proper return to commands is TxDummy */ + if (ret != TXDUMMY) { + for (i = 0; i < 256; i++)/* flushing bus */ + if (jornada_ssp_byte(TXDUMMY) == -1) + break; + return -ETIMEDOUT; + } + } else /* Exchange TxDummy for data */ + ret = jornada_ssp_byte(TXDUMMY); + + return ret; +}; +EXPORT_SYMBOL(jornada_ssp_inout); + +/** + * jornada_ssp_start - enable mcu + * + */ +int jornada_ssp_start() +{ + spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags); + GPCR = GPIO_GPIO25; + udelay(50); + return 0; +}; +EXPORT_SYMBOL(jornada_ssp_start); + +/** + * jornada_ssp_end - disable mcu and turn off lock + * + */ +int jornada_ssp_end() +{ + GPSR = GPIO_GPIO25; + spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags); + return 0; +}; +EXPORT_SYMBOL(jornada_ssp_end); + +static int __init jornada_ssp_probe(struct platform_device *dev) +{ + int ret; + + GPSR = GPIO_GPIO25; + + ret = ssp_init(); + + /* worked fine, lets not bother with anything else */ + if (!ret) { + printk(KERN_INFO "SSP: device initialized with irq\n"); + return ret; + } + + printk(KERN_WARNING "SSP: initialization failed, trying non-irq solution \n"); + + /* init of Serial 4 port */ + Ser4MCCR0 = 0; + Ser4SSCR0 = 0x0387; + Ser4SSCR1 = 0x18; + + /* clear out any left over data */ + ssp_flush(); + + /* enable MCU */ + jornada_ssp_start(); + + /* see if return value makes sense */ + ret = jornada_ssp_inout(GETBRIGHTNESS); + + /* seems like it worked, just feed it with TxDummy to get rid of data */ + if (ret == TxDummy) + jornada_ssp_inout(TXDUMMY); + + jornada_ssp_end(); + + /* failed, lets just kill everything */ + if (ret == -ETIMEDOUT) { + printk(KERN_WARNING "SSP: attempts failed, bailing\n"); + ssp_exit(); + return -ENODEV; + } + + /* all fine */ + printk(KERN_INFO "SSP: device initialized\n"); + return 0; +}; + +static int jornada_ssp_remove(struct platform_device *dev) +{ + /* Note that this doesnt actually remove the driver, since theres nothing to remove + * It just makes sure everything is turned off */ + GPSR = GPIO_GPIO25; + ssp_exit(); + return 0; +}; + +struct platform_driver jornadassp_driver = { + .probe = jornada_ssp_probe, + .remove = jornada_ssp_remove, + .driver = { + .name = "jornada_ssp", + }, +}; + +static int __init jornada_ssp_init(void) +{ + return platform_driver_register(&jornadassp_driver); +} diff --git a/include/asm-arm/arch-sa1100/jornada720.h b/include/asm-arm/arch-sa1100/jornada720.h new file mode 100644 index 000000000000..45d2bb59f9d0 --- /dev/null +++ b/include/asm-arm/arch-sa1100/jornada720.h @@ -0,0 +1,27 @@ +/* + * include/asm-arm/arch-sa1100/jornada720.h + * + * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728 + * + * Copyright (C) 2007 Kristoffer Ericson + * Copyright (C) 2000 John Ankcorn + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + + /* HP Jornada 7xx microprocessor commands */ +#define GETBATTERYDATA 0xc0 +#define GETSCANKEYCODE 0x90 +#define GETTOUCHSAMPLES 0xa0 +#define GETCONTRAST 0xD0 +#define SETCONTRAST 0xD1 +#define GETBRIGHTNESS 0xD2 +#define SETBRIGHTNESS 0xD3 +#define CONTRASTOFF 0xD8 +#define BRIGHTNESSOFF 0xD9 +#define PWMOFF 0xDF +#define TXDUMMY 0x11 +#define ERRORCODE 0x00 From 7092fc38ee770251aed361572bf6bed05fcf3ee2 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jul 2007 11:42:29 +0100 Subject: [PATCH 39/60] [ARM] 4498/1: ARMv7: Remove the L2 cache configuration via the aux ctrl register The auxiliary control and the L2 auxiliary control registers are Cortex-A8 specific. They need to be removed from the generic ARMv7 support code. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 6 ------ arch/arm/mm/proc-v7.S | 10 ---------- 2 files changed, 16 deletions(-) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index d377376d6eed..7cc32b707113 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -612,12 +612,6 @@ config CPU_CACHE_ROUND_ROBIN Say Y here to use the predictable round-robin cache replacement policy. Unless you specifically require this or are unsure, say N. -config CPU_L2CACHE_DISABLE - bool "Disable level 2 cache" - depends on CPU_V7 - help - Say Y here to disable the level 2 cache. If unsure, say N. - config CPU_BPREDICT_DISABLE bool "Disable branch prediction" depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7 diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 718f4782ee8b..07b0269dafa7 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -176,16 +176,6 @@ __v7_setup: mcr p15, 0, r4, c2, c0, 1 @ load TTB1 mov r10, #0x1f @ domains 0, 1 = manager mcr p15, 0, r10, c3, c0, 0 @ load domain access register -#ifndef CONFIG_CPU_L2CACHE_DISABLE - @ L2 cache configuration in the L2 aux control register - mrc p15, 1, r10, c9, c0, 2 - bic r10, r10, #(1 << 16) @ L2 outer cache - mcr p15, 1, r10, c9, c0, 2 - @ L2 cache is enabled in the aux control register - mrc p15, 0, r10, c1, c0, 1 - orr r10, r10, #2 - mcr p15, 0, r10, c1, c0, 1 -#endif mrc p15, 0, r0, c1, c0, 0 @ read control register ldr r10, cr1_clear @ get mask for bits to clear bic r0, r0, r10 @ clear bits them From 2eb8c82bc492d5f185150e63eba5eac4dff24178 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jul 2007 11:43:02 +0100 Subject: [PATCH 40/60] [ARM] 4503/1: nommu: Add noMMU support for ARMv7 This patch adds the necessary ifdef's to the proc-v7.S code and defines the v7wbi_tlb_fns macro in pgtable-nommu.h Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 2 +- arch/arm/mm/proc-v7.S | 25 ++++++++++++++----------- include/asm-arm/pgtable-nommu.h | 1 + 3 files changed, 16 insertions(+), 12 deletions(-) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 7cc32b707113..58109ae34709 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -377,7 +377,7 @@ config CPU_V7 select CPU_CACHE_V7 select CPU_CACHE_VIPT select CPU_CP15_MMU - select CPU_HAS_ASID + select CPU_HAS_ASID if MMU select CPU_COPY_V6 if MMU select CPU_TLB_V7 if MMU diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 07b0269dafa7..e0acc5ae6f6f 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -77,6 +77,7 @@ ENTRY(cpu_v7_dcache_clean_area) * - we are not using split page tables */ ENTRY(cpu_v7_switch_mm) +#ifdef CONFIG_MMU mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id orr r0, r0, #TTB_RGN_OC_WB @ mark PTWs outer cacheable, WB @@ -86,6 +87,7 @@ ENTRY(cpu_v7_switch_mm) isb mcr p15, 0, r1, c13, c0, 1 @ set context ID isb +#endif mov pc, lr /* @@ -109,6 +111,7 @@ ENTRY(cpu_v7_switch_mm) * 1111 0 1 1 r/w r/w */ ENTRY(cpu_v7_set_pte_ext) +#ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version bic r3, r1, #0x000003f0 @@ -136,6 +139,7 @@ ENTRY(cpu_v7_set_pte_ext) str r3, [r0] mcr p15, 0, r0, c7, c10, 1 @ flush_pte +#endif mov pc, lr cpu_v7_name: @@ -169,6 +173,7 @@ __v7_setup: mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate #endif dsb +#ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r10, c2, c0, 2 @ TTB control register orr r4, r4, #TTB_RGN_OC_WB @ mark PTWs outer cacheable, WB @@ -176,11 +181,12 @@ __v7_setup: mcr p15, 0, r4, c2, c0, 1 @ load TTB1 mov r10, #0x1f @ domains 0, 1 = manager mcr p15, 0, r10, c3, c0, 0 @ load domain access register - mrc p15, 0, r0, c1, c0, 0 @ read control register - ldr r10, cr1_clear @ get mask for bits to clear - bic r0, r0, r10 @ clear bits them - ldr r10, cr1_set @ get mask for bits to set - orr r0, r0, r10 @ set them +#endif + adr r5, v7_crval + ldmia r5, {r5, r6} + mrc p15, 0, r0, c1, c0, 0 @ read control register + bic r0, r0, r5 @ clear bits them + orr r0, r0, r6 @ set them mov pc, lr @ return to head.S:__ret /* @@ -189,12 +195,9 @@ __v7_setup: * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced * 0 110 0011 1.00 .111 1101 < we want */ - .type cr1_clear, #object - .type cr1_set, #object -cr1_clear: - .word 0x0120c302 -cr1_set: - .word 0x00c0387d + .type v7_crval, #object +v7_crval: + crval clear=0x0120c302, mmuset=0x00c0387d, ucset=0x00c0187c __v7_setup_stack: .space 4 * 11 @ 11 registers diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h index 1cf14d243e82..b186bc820e30 100644 --- a/include/asm-arm/pgtable-nommu.h +++ b/include/asm-arm/pgtable-nommu.h @@ -103,6 +103,7 @@ extern int is_in_rom(unsigned long); #define v4wb_tlb_fns (0) #define v4wbi_tlb_fns (0) #define v6wbi_tlb_fns (0) +#define v7wbi_tlb_fns (0) #define v3_user_fns (0) #define v4_user_fns (0) From 11179d8ca28d669e3d4cc7573a5f5fdda3e6f02d Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jul 2007 11:42:24 +0100 Subject: [PATCH 41/60] [ARM] 4497/1: Only allow safe cache configurations on ARMv6 and later Currently, Linux doesn't generate correct page tables for ARMv6 and later cores if the cache policy is different from the default one (it may lead to strongly ordered or shared device mappings). This patch disallows cache policies other than writeback and the CPU_[ID]CACHE_DISABLE options only affect the CP15 system control register rather than the page tables. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 2 +- arch/arm/mm/mmu.c | 14 ++++++++++---- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 58109ae34709..76a3ba668e2e 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -599,7 +599,7 @@ config CPU_DCACHE_SIZE config CPU_DCACHE_WRITETHROUGH bool "Force write through D-cache" - depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE + depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE default y if CPU_ARM925T help Say Y here to use the data cache in writethrough mode. Unless you diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 3b5e47dc0c97..e5d61ee3d4a1 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -114,6 +114,10 @@ static void __init early_cachepolicy(char **p) } if (i == ARRAY_SIZE(cache_policies)) printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n"); + if (cpu_architecture() >= CPU_ARCH_ARMv6) { + printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n"); + cachepolicy = CPOLICY_WRITEBACK; + } flush_cache_all(); set_cr(cr_alignment); } @@ -252,13 +256,15 @@ static void __init build_mem_type_table(void) int cpu_arch = cpu_architecture(); int i; + if (cpu_arch < CPU_ARCH_ARMv6) { #if defined(CONFIG_CPU_DCACHE_DISABLE) - if (cachepolicy > CPOLICY_BUFFERED) - cachepolicy = CPOLICY_BUFFERED; + if (cachepolicy > CPOLICY_BUFFERED) + cachepolicy = CPOLICY_BUFFERED; #elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH) - if (cachepolicy > CPOLICY_WRITETHROUGH) - cachepolicy = CPOLICY_WRITETHROUGH; + if (cachepolicy > CPOLICY_WRITETHROUGH) + cachepolicy = CPOLICY_WRITETHROUGH; #endif + } if (cpu_arch < CPU_ARCH_ARMv5) { if (cachepolicy >= CPOLICY_WRITEALLOC) cachepolicy = CPOLICY_WRITEBACK; From 7bbb18c9f4783b6fb3bf27af71625b590cf4f00b Mon Sep 17 00:00:00 2001 From: Bill Gatliff Date: Sat, 21 Jul 2007 03:39:36 +0100 Subject: [PATCH 42/60] [ARM] 4507/1: pxa2xx clock_event_device Reimplements arch/arm/mach-pxa/time.c using a clock_event_device based on OSMR0. Tested on PXA270, linux-2.6.22+arm:pxa patches. Signed-off-by: Bill Gatliff Signed-off-by: Russell King --- arch/arm/mach-pxa/time.c | 256 +++++++++++++++++++-------------------- 1 file changed, 127 insertions(+), 129 deletions(-) diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 6f91fd2d061a..98d27e646b09 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -1,9 +1,11 @@ /* * arch/arm/mach-pxa/time.c * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. + * PXA clocksource, clockevents, and OST interrupt handlers. + * Copyright (c) 2007 by Bill Gatliff . + * + * Derived from Nicolas Pitre's PXA timer handler Copyright (c) 2001 + * by MontaVista Software, Inc. (Nico, your code rocks!) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,164 +14,160 @@ #include #include -#include #include -#include -#include -#include -#include -#include +#include -#include -#include -#include -#include -#include #include #include #include - -static int pxa_set_rtc(void) -{ - unsigned long current_time = xtime.tv_sec; - - if (RTSR & RTSR_ALE) { - /* make sure not to forward the clock over an alarm */ - unsigned long alarm = RTAR; - if (current_time >= alarm && alarm >= RCNR) - return -ERESTARTSYS; - } - RCNR = current_time; - return 0; -} - -#ifdef CONFIG_NO_IDLE_HZ -static unsigned long initial_match; -static int match_posponed; -#endif - static irqreturn_t -pxa_timer_interrupt(int irq, void *dev_id) +pxa_ost0_interrupt(int irq, void *dev_id) { int next_match; + struct clock_event_device *c = dev_id; - write_seqlock(&xtime_lock); - -#ifdef CONFIG_NO_IDLE_HZ - if (match_posponed) { - match_posponed = 0; - OSMR0 = initial_match; - } -#endif - - /* Loop until we get ahead of the free running timer. - * This ensures an exact clock tick count and time accuracy. - * Since IRQs are disabled at this point, coherence between - * lost_ticks(updated in do_timer()) and the match reg value is - * ensured, hence we can use do_gettimeofday() from interrupt - * handlers. - * - * HACK ALERT: it seems that the PXA timer regs aren't updated right - * away in all cases when a write occurs. We therefore compare with - * 8 instead of 0 in the while() condition below to avoid missing a - * match if OSCR has already reached the next OSMR value. - * Experience has shown that up to 6 ticks are needed to work around - * this problem, but let's use 8 to be conservative. Note that this - * affect things only when the timer IRQ has been delayed by nearly - * exactly one tick period which should be a pretty rare event. + if (c->mode == CLOCK_EVT_MODE_ONESHOT) { + /* Disarm the compare/match, signal the event. */ + OIER &= ~OIER_E0; + c->event_handler(c); + } else if (c->mode == CLOCK_EVT_MODE_PERIODIC) { + /* Call the event handler as many times as necessary + * to recover missed events, if any (if we update + * OSMR0 and OSCR0 is still ahead of us, we've missed + * the event). As we're dealing with that, re-arm the + * compare/match for the next event. + * + * HACK ALERT: + * + * There's a latency between the instruction that + * writes to OSMR0 and the actual commit to the + * physical hardware, because the CPU doesn't (have + * to) run at bus speed, there's a write buffer + * between the CPU and the bus, etc. etc. So if the + * target OSCR0 is "very close", to the OSMR0 load + * value, the update to OSMR0 might not get to the + * hardware in time and we'll miss that interrupt. + * + * To be safe, if the new OSMR0 is "very close" to the + * target OSCR0 value, we call the event_handler as + * though the event actually happened. According to + * Nico's comment in the previous version of this + * code, experience has shown that 6 OSCR ticks is + * "very close" but he went with 8. We will use 16, + * based on the results of testing on PXA270. + * + * To be doubly sure, we also tell clkevt via + * clockevents_register_device() not to ask for + * anything that might put us "very close". */ +#define MIN_OSCR_DELTA 16 do { - timer_tick(); - OSSR = OSSR_M0; /* Clear match on timer 0 */ + OSSR = OSSR_M0; next_match = (OSMR0 += LATCH); - } while( (signed long)(next_match - OSCR) <= 8 ); - - write_sequnlock(&xtime_lock); + c->event_handler(c); + } while (((signed long)(next_match - OSCR) <= MIN_OSCR_DELTA) + && (c->mode == CLOCK_EVT_MODE_PERIODIC)); + } return IRQ_HANDLED; } -static struct irqaction pxa_timer_irq = { - .name = "PXA Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = pxa_timer_interrupt, +static int +pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev) +{ + unsigned long irqflags; + + raw_local_irq_save(irqflags); + OSMR0 = OSCR + delta; + OSSR = OSSR_M0; + OIER |= OIER_E0; + raw_local_irq_restore(irqflags); + return 0; +} + +static void +pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) +{ + unsigned long irqflags; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + raw_local_irq_save(irqflags); + OSMR0 = OSCR + LATCH; + OSSR = OSSR_M0; + OIER |= OIER_E0; + raw_local_irq_restore(irqflags); + break; + + case CLOCK_EVT_MODE_ONESHOT: + raw_local_irq_save(irqflags); + OIER &= ~OIER_E0; + raw_local_irq_restore(irqflags); + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + /* initializing, released, or preparing for suspend */ + raw_local_irq_save(irqflags); + OIER &= ~OIER_E0; + raw_local_irq_restore(irqflags); + break; + } +} + +static struct clock_event_device ckevt_pxa_osmr0 = { + .name = "osmr0", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .rating = 200, + .cpumask = CPU_MASK_CPU0, + .set_next_event = pxa_osmr0_set_next_event, + .set_mode = pxa_osmr0_set_mode, }; -static cycle_t pxa_get_cycles(void) +static cycle_t pxa_read_oscr(void) { return OSCR; } -static struct clocksource clocksource_pxa = { - .name = "pxa_timer", +static struct clocksource cksrc_pxa_oscr0 = { + .name = "oscr0", .rating = 200, - .read = pxa_get_cycles, + .read = pxa_read_oscr, .mask = CLOCKSOURCE_MASK(32), .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static struct irqaction pxa_ost0_irq = { + .name = "ost0", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = pxa_ost0_interrupt, + .dev_id = &ckevt_pxa_osmr0, +}; + static void __init pxa_timer_init(void) { - struct timespec tv; - unsigned long flags; + OIER = 0; + OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; - set_rtc = pxa_set_rtc; + ckevt_pxa_osmr0.mult = + div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt_pxa_osmr0.shift); + ckevt_pxa_osmr0.max_delta_ns = + clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0); + ckevt_pxa_osmr0.min_delta_ns = + clockevent_delta2ns(MIN_OSCR_DELTA, &ckevt_pxa_osmr0) + 1; - OIER = 0; /* disable any timer interrupts */ - OSSR = 0xf; /* clear status on all timers */ - setup_irq(IRQ_OST0, &pxa_timer_irq); - local_irq_save(flags); - OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ - OSMR0 = OSCR + LATCH; /* set initial match */ - local_irq_restore(flags); + cksrc_pxa_oscr0.mult = + clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_pxa_oscr0.shift); - /* - * OSCR runs continuously on PXA and is not written to, - * so we can use it as clock source directly. - */ - clocksource_pxa.mult = - clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_pxa.shift); - clocksource_register(&clocksource_pxa); + setup_irq(IRQ_OST0, &pxa_ost0_irq); + + clocksource_register(&cksrc_pxa_oscr0); + clockevents_register_device(&ckevt_pxa_osmr0); } -#ifdef CONFIG_NO_IDLE_HZ -static int pxa_dyn_tick_enable_disable(void) -{ - /* nothing to do */ - return 0; -} - -static void pxa_dyn_tick_reprogram(unsigned long ticks) -{ - if (ticks > 1) { - initial_match = OSMR0; - OSMR0 = initial_match + ticks * LATCH; - match_posponed = 1; - } -} - -static irqreturn_t -pxa_dyn_tick_handler(int irq, void *dev_id) -{ - if (match_posponed) { - match_posponed = 0; - OSMR0 = initial_match; - if ( (signed long)(initial_match - OSCR) <= 8 ) - return pxa_timer_interrupt(irq, dev_id); - } - return IRQ_NONE; -} - -static struct dyn_tick_timer pxa_dyn_tick = { - .enable = pxa_dyn_tick_enable_disable, - .disable = pxa_dyn_tick_enable_disable, - .reprogram = pxa_dyn_tick_reprogram, - .handler = pxa_dyn_tick_handler, -}; -#endif - #ifdef CONFIG_PM static unsigned long osmr[4], oier; @@ -191,7 +189,10 @@ static void pxa_timer_resume(void) OIER = oier; /* - * OSMR0 is the system timer: make sure OSCR is sufficiently behind + * OSCR0 is the system timer, which has to increase + * monotonically until it rolls over in hardware. The value + * (OSMR0 - LATCH) is OSCR0 at the most recent system tick, + * which is a handy value to restore to OSCR0. */ OSCR = OSMR0 - LATCH; } @@ -204,7 +205,4 @@ struct sys_timer pxa_timer = { .init = pxa_timer_init, .suspend = pxa_timer_suspend, .resume = pxa_timer_resume, -#ifdef CONFIG_NO_IDLE_HZ - .dyn_tick = &pxa_dyn_tick, -#endif }; From 52c543f90c4095dff71dc125017594b61a753069 Mon Sep 17 00:00:00 2001 From: Quinn Jensen Date: Mon, 9 Jul 2007 22:06:53 +0100 Subject: [PATCH 43/60] [ARM] 4461/1: MXC platform and i.MX31ADS core support This patch adds the foundation pieces for the Freescale MXC platforms, including i.MX2 and i.MX3 based systems. The bare-bones MX31 support in this patch boots to the rootdev panic with 8250 serial console configured "console=ttyS0,115200". It assumes that Redboot is the boot loader. Signed-off-by: Quinn Jensen Acked-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/Kconfig | 8 + arch/arm/Makefile | 3 + arch/arm/mach-mx3/Kconfig | 12 + arch/arm/mach-mx3/Makefile | 8 + arch/arm/mach-mx3/Makefile.boot | 3 + arch/arm/mach-mx3/mm.c | 64 +++++ arch/arm/mach-mx3/mx31ads.c | 142 ++++++++++ arch/arm/mach-mx3/time.c | 152 ++++++++++ arch/arm/mm/Kconfig | 5 +- arch/arm/plat-mxc/Kconfig | 20 ++ arch/arm/plat-mxc/Makefile | 10 + arch/arm/plat-mxc/irq.c | 83 ++++++ include/asm-arm/arch-mxc/board-mx31ads.h | 142 ++++++++++ include/asm-arm/arch-mxc/common.h | 20 ++ include/asm-arm/arch-mxc/dma.h | 21 ++ include/asm-arm/arch-mxc/entry-macro.S | 39 +++ include/asm-arm/arch-mxc/hardware.h | 52 ++++ include/asm-arm/arch-mxc/io.h | 33 +++ include/asm-arm/arch-mxc/irqs.h | 38 +++ include/asm-arm/arch-mxc/memory.h | 36 +++ include/asm-arm/arch-mxc/mx31.h | 335 +++++++++++++++++++++++ include/asm-arm/arch-mxc/mxc.h | 149 ++++++++++ include/asm-arm/arch-mxc/system.h | 50 ++++ include/asm-arm/arch-mxc/timex.h | 25 ++ include/asm-arm/arch-mxc/uncompress.h | 79 ++++++ include/asm-arm/arch-mxc/vmalloc.h | 36 +++ 26 files changed, 1563 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-mx3/Kconfig create mode 100644 arch/arm/mach-mx3/Makefile create mode 100644 arch/arm/mach-mx3/Makefile.boot create mode 100644 arch/arm/mach-mx3/mm.c create mode 100644 arch/arm/mach-mx3/mx31ads.c create mode 100644 arch/arm/mach-mx3/time.c create mode 100644 arch/arm/plat-mxc/Kconfig create mode 100644 arch/arm/plat-mxc/Makefile create mode 100644 arch/arm/plat-mxc/irq.c create mode 100644 include/asm-arm/arch-mxc/board-mx31ads.h create mode 100644 include/asm-arm/arch-mxc/common.h create mode 100644 include/asm-arm/arch-mxc/dma.h create mode 100644 include/asm-arm/arch-mxc/entry-macro.S create mode 100644 include/asm-arm/arch-mxc/hardware.h create mode 100644 include/asm-arm/arch-mxc/io.h create mode 100644 include/asm-arm/arch-mxc/irqs.h create mode 100644 include/asm-arm/arch-mxc/memory.h create mode 100644 include/asm-arm/arch-mxc/mx31.h create mode 100644 include/asm-arm/arch-mxc/mxc.h create mode 100644 include/asm-arm/arch-mxc/system.h create mode 100644 include/asm-arm/arch-mxc/timex.h create mode 100644 include/asm-arm/arch-mxc/uncompress.h create mode 100644 include/asm-arm/arch-mxc/vmalloc.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a44c6da9bf83..0658e5d85131 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -324,6 +324,12 @@ config ARCH_NS9XXX +config ARCH_MXC + bool "Freescale MXC/iMX-based" + select ARCH_MTD_XIP + help + Support for Freescale MXC/iMX-based family of processors + config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" help @@ -456,6 +462,8 @@ source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-at91/Kconfig" +source "arch/arm/plat-mxc/Kconfig" + source "arch/arm/mach-netx/Kconfig" source "arch/arm/mach-ns9xxx/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index cbd5010d3bc3..fa4ea9ff0797 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -137,6 +137,8 @@ endif textofs-$(CONFIG_ARCH_NS9XXX) := 0x00108000 machine-$(CONFIG_ARCH_DAVINCI) := davinci machine-$(CONFIG_ARCH_KS8695) := ks8695 + incdir-$(CONFIG_ARCH_MXC) := mxc + machine-$(CONFIG_ARCH_MX3) := mx3 ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. @@ -183,6 +185,7 @@ core-$(CONFIG_VFP) += arch/arm/vfp/ core-$(CONFIG_PLAT_IOP) += arch/arm/plat-iop/ core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/ core-$(CONFIG_PLAT_S3C24XX) += arch/arm/plat-s3c24xx/ +core-$(CONFIG_ARCH_MXC) += arch/arm/plat-mxc/ drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/ diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig new file mode 100644 index 000000000000..5fe8606cac08 --- /dev/null +++ b/arch/arm/mach-mx3/Kconfig @@ -0,0 +1,12 @@ +menu "MX3 Options" + depends on ARCH_MX3 + +config MACH_MX31ADS + bool "Support MX31ADS platforms" + default y + help + Include support for MX31ADS platform. This includes specific + configurations for the board and its peripherals. + +endmenu + diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile new file mode 100644 index 000000000000..cbec997f332a --- /dev/null +++ b/arch/arm/mach-mx3/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel. +# + +# Object file lists. + +obj-y := mm.o time.o +obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o diff --git a/arch/arm/mach-mx3/Makefile.boot b/arch/arm/mach-mx3/Makefile.boot new file mode 100644 index 000000000000..e1dd366f836b --- /dev/null +++ b/arch/arm/mach-mx3/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x80008000 +params_phys-y := 0x80000100 +initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c new file mode 100644 index 000000000000..41dad485ded9 --- /dev/null +++ b/arch/arm/mach-mx3/mm.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 1999,2000 Arm Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * - add MX31 specific definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +/*! + * @file mm.c + * + * @brief This file creates static virtual to physical mappings, common to all MX3 boards. + * + * @ingroup Memory + */ + +/*! + * This table defines static virtual address mappings for I/O regions. + * These are the mappings common across all MX3 boards. + */ +static struct map_desc mxc_io_desc[] __initdata = { + { + .virtual = X_MEMC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(X_MEMC_BASE_ADDR), + .length = X_MEMC_SIZE, + .type = MT_DEVICE + }, { + .virtual = AVIC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AVIC_BASE_ADDR), + .length = AVIC_SIZE, + .type = MT_NONSHARED_DEVICE + }, +}; + +/*! + * This function initializes the memory map. It is called during the + * system startup to create static physical to virtual memory mappings + * for the IO modules. + */ +void __init mxc_map_io(void) +{ + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c new file mode 100644 index 000000000000..7e89bdc23a9f --- /dev/null +++ b/arch/arm/mach-mx3/mx31ads.c @@ -0,0 +1,142 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +/*! + * @file mx31ads.c + * + * @brief This file contains the board-specific initialization routines. + * + * @ingroup System + */ + +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +/*! + * The serial port definition structure. + */ +static struct plat_serial8250_port serial_platform_data[] = { + { + .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA), + .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA), + .irq = EXPIO_INT_XUART_INTA, + .uartclk = 14745600, + .regshift = 0, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ, + }, { + .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB), + .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB), + .irq = EXPIO_INT_XUART_INTB, + .uartclk = 14745600, + .regshift = 0, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ, + }, + {}, +}; + +static struct platform_device serial_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = serial_platform_data, + }, +}; + +static int __init mxc_init_extuart(void) +{ + return platform_device_register(&serial_device); +} +#else +static inline int mxc_init_extuart(void) +{ + return 0; +} +#endif + +/*! + * This structure defines static mappings for the i.MX31ADS board. + */ +static struct map_desc mx31ads_io_desc[] __initdata = { + { + .virtual = AIPS1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), + .length = AIPS1_SIZE, + .type = MT_NONSHARED_DEVICE + }, { + .virtual = SPBA0_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), + .length = SPBA0_SIZE, + .type = MT_NONSHARED_DEVICE + }, { + .virtual = AIPS2_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), + .length = AIPS2_SIZE, + .type = MT_NONSHARED_DEVICE + }, { + .virtual = CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(CS4_BASE_ADDR), + .length = CS4_SIZE / 2, + .type = MT_DEVICE + }, +}; + +/*! + * Set up static virtual mappings. + */ +void __init mx31ads_map_io(void) +{ + mxc_map_io(); + iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc)); +} + +/*! + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + mxc_init_extuart(); +} + +/* + * The following uses standard kernel macros defined in arch.h in order to + * initialize __mach_desc_MX31ADS data structure. + */ +MACHINE_START(MX31ADS, "Freescale MX31ADS") + /* Maintainer: Freescale Semiconductor, Inc. */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx31ads_map_io, + .init_irq = mxc_init_irq, + .init_machine = mxc_board_init, + .timer = &mxc_timer, +MACHINE_END diff --git a/arch/arm/mach-mx3/time.c b/arch/arm/mach-mx3/time.c new file mode 100644 index 000000000000..e81fb5c5d7c3 --- /dev/null +++ b/arch/arm/mach-mx3/time.c @@ -0,0 +1,152 @@ +/* + * System Timer Interrupt reconfigured to run in free-run mode. + * Author: Vitaly Wool + * Copyright 2004 MontaVista Software Inc. + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/*! + * @file time.c + * @brief This file contains OS tick and wdog timer implementations. + * + * This file contains OS tick and wdog timer implementations. + * + * @ingroup Timers + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/*! + * This is the timer interrupt service routine to do required tasks. + * It also services the WDOG timer at the frequency of twice per WDOG + * timeout value. For example, if the WDOG's timeout value is 4 (2 + * seconds since the WDOG runs at 0.5Hz), it will be serviced once + * every 2/2=1 second. + * + * @param irq GPT interrupt source number (not used) + * @param dev_id this parameter is not used + * @return always returns \b IRQ_HANDLED as defined in + * include/linux/interrupt.h. + */ +static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) +{ + unsigned int next_match; + + write_seqlock(&xtime_lock); + + if (__raw_readl(MXC_GPT_GPTSR) & GPTSR_OF1) { + do { + timer_tick(); + next_match = __raw_readl(MXC_GPT_GPTOCR1) + LATCH; + __raw_writel(GPTSR_OF1, MXC_GPT_GPTSR); + __raw_writel(next_match, MXC_GPT_GPTOCR1); + } while ((signed long)(next_match - + __raw_readl(MXC_GPT_GPTCNT)) <= 0); + } + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +/*! + * This function is used to obtain the number of microseconds since the last + * timer interrupt. Note that interrupts is disabled by do_gettimeofday(). + * + * @return the number of microseconds since the last timer interrupt. + */ +static unsigned long mxc_gettimeoffset(void) +{ + unsigned long ticks_to_match, elapsed, usec, tick_usec, i; + + /* Get ticks before next timer match */ + ticks_to_match = + __raw_readl(MXC_GPT_GPTOCR1) - __raw_readl(MXC_GPT_GPTCNT); + + /* We need elapsed ticks since last match */ + elapsed = LATCH - ticks_to_match; + + /* Now convert them to usec */ + /* Insure no overflow when calculating the usec below */ + for (i = 1, tick_usec = tick_nsec / 1000;; i *= 2) { + tick_usec /= i; + if ((0xFFFFFFFF / tick_usec) > elapsed) + break; + } + usec = (unsigned long)(elapsed * tick_usec) / (LATCH / i); + + return usec; +} + +/*! + * The OS tick timer interrupt structure. + */ +static struct irqaction timer_irq = { + .name = "MXC Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = mxc_timer_interrupt +}; + +/*! + * This function is used to initialize the GPT to produce an interrupt + * based on HZ. It is called by start_kernel() during system startup. + */ +void __init mxc_init_time(void) +{ + u32 reg, v; + reg = __raw_readl(MXC_GPT_GPTCR); + reg &= ~GPTCR_ENABLE; + __raw_writel(reg, MXC_GPT_GPTCR); + reg |= GPTCR_SWR; + __raw_writel(reg, MXC_GPT_GPTCR); + + while ((__raw_readl(MXC_GPT_GPTCR) & GPTCR_SWR) != 0) + cpu_relax(); + + reg = GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ; + __raw_writel(reg, MXC_GPT_GPTCR); + + /* TODO: get timer rate from clk driver */ + v = 66500000; + + __raw_writel((v / CLOCK_TICK_RATE) - 1, MXC_GPT_GPTPR); + + if ((v % CLOCK_TICK_RATE) != 0) { + pr_info("\nWARNING: Can't generate CLOCK_TICK_RATE at %d Hz\n", + CLOCK_TICK_RATE); + } + pr_info("Actual CLOCK_TICK_RATE is %d Hz\n", + v / ((__raw_readl(MXC_GPT_GPTPR) & 0xFFF) + 1)); + + reg = __raw_readl(MXC_GPT_GPTCNT); + reg += LATCH; + __raw_writel(reg, MXC_GPT_GPTOCR1); + + setup_irq(MXC_INT_GPT, &timer_irq); + + reg = __raw_readl(MXC_GPT_GPTCR); + reg = + GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ | GPTCR_STOPEN | GPTCR_DOZEN | + GPTCR_WAITEN | GPTCR_ENMOD | GPTCR_ENABLE; + __raw_writel(reg, MXC_GPT_GPTCR); + + __raw_writel(GPTIR_OF1IE, MXC_GPT_GPTIR); +} + +struct sys_timer mxc_timer = { + .init = mxc_init_time, + .offset = mxc_gettimeoffset, +}; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e7904bc92c73..699b899214ae 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -345,7 +345,8 @@ config CPU_XSC3 # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 + default y if ARCH_MX3 select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 @@ -359,7 +360,7 @@ config CPU_V6 config CPU_32v6K bool "Support ARM V6K processor extensions" if !SMP depends on CPU_V6 - default y if SMP + default y if SMP && !ARCH_MX3 help Say Y here if your ARMv6 processor supports the 'K' extension. This enables the kernel to use some instructions not present diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig new file mode 100644 index 000000000000..03a65c0dfb60 --- /dev/null +++ b/arch/arm/plat-mxc/Kconfig @@ -0,0 +1,20 @@ +if ARCH_MXC + +menu "Freescale MXC Implementations" + +choice + prompt "MXC/iMX System Type" + default 0 + +config ARCH_MX3 + bool "MX3-based" + help + This enables support for systems based on the Freescale i.MX3 family + +endchoice + +source "arch/arm/mach-mx3/Kconfig" + +endmenu + +endif diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile new file mode 100644 index 000000000000..66ad9c2b6d64 --- /dev/null +++ b/arch/arm/plat-mxc/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the linux kernel. +# + +# Common support +obj-y := irq.o + +obj-m := +obj-n := +obj- := diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c new file mode 100644 index 000000000000..87d253bc3d3c --- /dev/null +++ b/arch/arm/plat-mxc/irq.c @@ -0,0 +1,83 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/*! + * Disable interrupt number "irq" in the AVIC + * + * @param irq interrupt source number + */ +static void mxc_mask_irq(unsigned int irq) +{ + __raw_writel(irq, AVIC_INTDISNUM); +} + +/*! + * Enable interrupt number "irq" in the AVIC + * + * @param irq interrupt source number + */ +static void mxc_unmask_irq(unsigned int irq) +{ + __raw_writel(irq, AVIC_INTENNUM); +} + +static struct irq_chip mxc_avic_chip = { + .mask_ack = mxc_mask_irq, + .mask = mxc_mask_irq, + .unmask = mxc_unmask_irq, +}; + +/*! + * This function initializes the AVIC hardware and disables all the + * interrupts. It registers the interrupt enable and disable functions + * to the kernel for each interrupt source. + */ +void __init mxc_init_irq(void) +{ + int i; + u32 reg; + + /* put the AVIC into the reset value with + * all interrupts disabled + */ + __raw_writel(0, AVIC_INTCNTL); + __raw_writel(0x1f, AVIC_NIMASK); + + /* disable all interrupts */ + __raw_writel(0, AVIC_INTENABLEH); + __raw_writel(0, AVIC_INTENABLEL); + + /* all IRQ no FIQ */ + __raw_writel(0, AVIC_INTTYPEH); + __raw_writel(0, AVIC_INTTYPEL); + for (i = 0; i < MXC_MAX_INT_LINES; i++) { + set_irq_chip(i, &mxc_avic_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + + /* Set WDOG2's interrupt the highest priority level (bit 28-31) */ + reg = __raw_readl(AVIC_NIPRIORITY6); + reg |= (0xF << 28); + __raw_writel(reg, AVIC_NIPRIORITY6); + + printk(KERN_INFO "MXC IRQ initialized\n"); +} diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/include/asm-arm/arch-mxc/board-mx31ads.h new file mode 100644 index 000000000000..be29b83ad4ae --- /dev/null +++ b/include/asm-arm/arch-mxc/board-mx31ads.h @@ -0,0 +1,142 @@ +/* + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ +#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ + +/*! + * @name PBC Controller parameters + */ +/*! @{ */ +/*! + * Base address of PBC controller + */ +#define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR) +/* Offsets for the PBC Controller register */ +/*! + * PBC Board status register offset + */ +#define PBC_BSTAT 0x000002 +/*! + * PBC Board control register 1 set address. + */ +#define PBC_BCTRL1_SET 0x000004 +/*! + * PBC Board control register 1 clear address. + */ +#define PBC_BCTRL1_CLEAR 0x000006 +/*! + * PBC Board control register 2 set address. + */ +#define PBC_BCTRL2_SET 0x000008 +/*! + * PBC Board control register 2 clear address. + */ +#define PBC_BCTRL2_CLEAR 0x00000A +/*! + * PBC Board control register 3 set address. + */ +#define PBC_BCTRL3_SET 0x00000C +/*! + * PBC Board control register 3 clear address. + */ +#define PBC_BCTRL3_CLEAR 0x00000E +/*! + * PBC Board control register 4 set address. + */ +#define PBC_BCTRL4_SET 0x000010 +/*! + * PBC Board control register 4 clear address. + */ +#define PBC_BCTRL4_CLEAR 0x000012 +/*! + * PBC Board status register 1. + */ +#define PBC_BSTAT1 0x000014 +/*! + * PBC Board interrupt status register. + */ +#define PBC_INTSTATUS 0x000016 +/*! + * PBC Board interrupt current status register. + */ +#define PBC_INTCURR_STATUS 0x000018 +/*! + * PBC Interrupt mask register set address. + */ +#define PBC_INTMASK_SET 0x00001A +/*! + * PBC Interrupt mask register clear address. + */ +#define PBC_INTMASK_CLEAR 0x00001C + +/*! + * External UART A. + */ +#define PBC_SC16C652_UARTA 0x010000 +/*! + * External UART B. + */ +#define PBC_SC16C652_UARTB 0x010010 +/*! + * Ethernet Controller IO base address. + */ +#define PBC_CS8900A_IOBASE 0x020000 +/*! + * Ethernet Controller Memory base address. + */ +#define PBC_CS8900A_MEMBASE 0x021000 +/*! + * Ethernet Controller DMA base address. + */ +#define PBC_CS8900A_DMABASE 0x022000 +/*! + * External chip select 0. + */ +#define PBC_XCS0 0x040000 +/*! + * LCD Display enable. + */ +#define PBC_LCD_EN_B 0x060000 +/*! + * Code test debug enable. + */ +#define PBC_CODE_B 0x070000 +/*! + * PSRAM memory select. + */ +#define PBC_PSRAM_B 0x5000000 + +#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) +#define PBC_INTCURR_STATUS_REG (PBC_INTCURR_STATUS + PBC_BASE_ADDRESS) +#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) +#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) +#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) + +#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 0) +#define EXPIO_INT_PB_IRQ (MXC_EXP_IO_BASE + 1) +#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) +#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) +#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) +#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) +#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) +#define EXPIO_INT_RES7 (MXC_EXP_IO_BASE + 7) +#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) +#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) +#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) +#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) +#define EXPIO_INT_SYNTH_IRQ (MXC_EXP_IO_BASE + 12) +#define EXPIO_INT_CE_INT1 (MXC_EXP_IO_BASE + 13) +#define EXPIO_INT_CE_INT2 (MXC_EXP_IO_BASE + 14) +#define EXPIO_INT_RES15 (MXC_EXP_IO_BASE + 15) + +#define MXC_MAX_EXP_IO_LINES 16 + +#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/include/asm-arm/arch-mxc/common.h b/include/asm-arm/arch-mxc/common.h new file mode 100644 index 000000000000..23b4350edbd6 --- /dev/null +++ b/include/asm-arm/arch-mxc/common.h @@ -0,0 +1,20 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_COMMON_H__ +#define __ASM_ARCH_MXC_COMMON_H__ + +struct sys_timer; + +extern void mxc_map_io(void); +extern void mxc_init_irq(void); +extern struct sys_timer mxc_timer; + +#endif diff --git a/include/asm-arm/arch-mxc/dma.h b/include/asm-arm/arch-mxc/dma.h new file mode 100644 index 000000000000..65e639d51d2b --- /dev/null +++ b/include/asm-arm/arch-mxc/dma.h @@ -0,0 +1,21 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_DMA_H__ +#define __ASM_ARCH_MXC_DMA_H__ + +/*! + * @file dma.h + * @brief This file contains Unified DMA API for all MXC platforms. + * The API is platform independent. + * + * @ingroup SDMA + */ +#endif diff --git a/include/asm-arm/arch-mxc/entry-macro.S b/include/asm-arm/arch-mxc/entry-macro.S new file mode 100644 index 000000000000..b542433afb1b --- /dev/null +++ b/include/asm-arm/arch-mxc/entry-macro.S @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2007 Lennert Buytenhek + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + @ this macro disables fast irq (not implemented) + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + @ this macro checks which interrupt occured + @ and returns its number in irqnr + @ and returns if an interrupt occured in irqstat + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR) + @ Load offset & priority of the highest priority + @ interrupt pending from AVIC_NIVECSR + ldr \irqstat, [\base, #0x40] + @ Shift to get the decoded IRQ number, using ASR so + @ 'no interrupt pending' becomes 0xffffffff + mov \irqnr, \irqstat, asr #16 + @ set zero flag if IRQ + 1 == 0 + adds \tmp, \irqnr, #1 + .endm + + @ irq priority table (not used) + .macro irq_prio_table + .endm diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h new file mode 100644 index 000000000000..3c09b92fef0d --- /dev/null +++ b/include/asm-arm/arch-mxc/hardware.h @@ -0,0 +1,52 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/*! + * @file hardware.h + * @brief This file contains the hardware definitions of the board. + * + * @ingroup System + */ +#ifndef __ASM_ARCH_MXC_HARDWARE_H__ +#define __ASM_ARCH_MXC_HARDWARE_H__ + +#include + +#include + +#include + +#define MXC_MAX_GPIO_LINES (GPIO_NUM_PIN * GPIO_PORT_NUM) + +/* + * --------------------------------------------------------------------------- + * Board specific defines + * --------------------------------------------------------------------------- + */ +#define MXC_EXP_IO_BASE (MXC_GPIO_INT_BASE + MXC_MAX_GPIO_LINES) + +#include + +#ifndef MXC_MAX_EXP_IO_LINES +#define MXC_MAX_EXP_IO_LINES 0 +#endif + +#define MXC_MAX_VIRTUAL_INTS 16 +#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES) +#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE +#define MXC_SDIO2_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 1) +#define MXC_SDIO3_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 2) + +#define MXC_MAX_INTS (MXC_MAX_INT_LINES + \ + MXC_MAX_GPIO_LINES + \ + MXC_MAX_EXP_IO_LINES + \ + MXC_MAX_VIRTUAL_INTS) + +#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/include/asm-arm/arch-mxc/io.h b/include/asm-arm/arch-mxc/io.h new file mode 100644 index 000000000000..cf6c83a4b9f7 --- /dev/null +++ b/include/asm-arm/arch-mxc/io.h @@ -0,0 +1,33 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/*! + * @file io.h + * @brief This file contains some memory mapping macros. + * @note There is no real ISA or PCI buses. But have to define these macros + * for some drivers to compile. + * + * @ingroup System + */ + +#ifndef __ASM_ARCH_MXC_IO_H__ +#define __ASM_ARCH_MXC_IO_H__ + +/*! Allow IO space to be anywhere in the memory */ +#define IO_SPACE_LIMIT 0xffffffff + +/*! + * io address mapping macro + */ +#define __io(a) ((void __iomem *)(a)) + +#define __mem_pci(a) (a) + +#endif diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h new file mode 100644 index 000000000000..e4686c6bc4bf --- /dev/null +++ b/include/asm-arm/arch-mxc/irqs.h @@ -0,0 +1,38 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_IRQS_H__ +#define __ASM_ARCH_MXC_IRQS_H__ + +#include + +/*! + * @file irqs.h + * @brief This file defines the number of normal interrupts and fast interrupts + * + * @ingroup Interrupt + */ + +#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) + +#define MXC_IRQ_TO_GPIO(irq) ((irq) - MXC_GPIO_INT_BASE) +#define MXC_GPIO_TO_IRQ(x) (MXC_GPIO_INT_BASE + x) + +/*! + * Number of normal interrupts + */ +#define NR_IRQS MXC_MAX_INTS + +/*! + * Number of fast interrupts + */ +#define NR_FIQS MXC_MAX_INTS + +#endif /* __ASM_ARCH_MXC_IRQS_H__ */ diff --git a/include/asm-arm/arch-mxc/memory.h b/include/asm-arm/arch-mxc/memory.h new file mode 100644 index 000000000000..c89aac83a407 --- /dev/null +++ b/include/asm-arm/arch-mxc/memory.h @@ -0,0 +1,36 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_MEMORY_H__ +#define __ASM_ARCH_MXC_MEMORY_H__ + +#include + +/*! + * @file memory.h + * @brief This file contains macros needed by the Linux kernel and drivers. + * + * @ingroup Memory + */ + +/*! + * Virtual view <-> DMA view memory address translations + * This macro is used to translate the virtual address to an address + * suitable to be passed to set_dma_addr() + */ +#define __virt_to_bus(a) __virt_to_phys(a) + +/*! + * Used to convert an address for DMA operations to an address that the + * kernel can use. + */ +#define __bus_to_virt(a) __phys_to_virt(a) + +#endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/include/asm-arm/arch-mxc/mx31.h b/include/asm-arm/arch-mxc/mx31.h new file mode 100644 index 000000000000..85c49c9e5d15 --- /dev/null +++ b/include/asm-arm/arch-mxc/mx31.h @@ -0,0 +1,335 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_MX31_H__ +#define __ASM_ARCH_MXC_MX31_H__ + +#ifndef __ASM_ARCH_MXC_HARDWARE_H__ +#error "Do not include directly." +#endif + +/*! + * defines the hardware clock tick rate + */ +#define CLOCK_TICK_RATE 16625000 + +/* + * MX31 memory map: + * + * Virt Phys Size What + * --------------------------------------------------------------------------- + * F8000000 1FFC0000 16K IRAM + * F9000000 30000000 256M L2CC + * FC000000 43F00000 1M AIPS 1 + * FC100000 50000000 1M SPBA + * FC200000 53F00000 1M AIPS 2 + * FC500000 60000000 128M ROMPATCH + * FC400000 68000000 128M AVIC + * 70000000 256M IPU (MAX M2) + * 80000000 256M CSD0 SDRAM/DDR + * 90000000 256M CSD1 SDRAM/DDR + * A0000000 128M CS0 Flash + * A8000000 128M CS1 Flash + * B0000000 32M CS2 + * B2000000 32M CS3 + * F4000000 B4000000 32M CS4 + * B6000000 32M CS5 + * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers + * C0000000 64M PCMCIA/CF + */ + +#define CS0_BASE_ADDR 0xA0000000 +#define CS1_BASE_ADDR 0xA8000000 +#define CS2_BASE_ADDR 0xB0000000 +#define CS3_BASE_ADDR 0xB2000000 + +#define CS4_BASE_ADDR 0xB4000000 +#define CS4_BASE_ADDR_VIRT 0xF4000000 +#define CS4_SIZE SZ_32M + +#define CS5_BASE_ADDR 0xB6000000 +#define PCMCIA_MEM_BASE_ADDR 0xBC000000 + +/* + * IRAM + */ +#define IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */ +#define IRAM_BASE_ADDR_VIRT 0xF8000000 +#define IRAM_SIZE SZ_16K + +/* + * L2CC + */ +#define L2CC_BASE_ADDR 0x30000000 +#define L2CC_BASE_ADDR_VIRT 0xF9000000 +#define L2CC_SIZE SZ_1M + +/* + * AIPS 1 + */ +#define AIPS1_BASE_ADDR 0x43F00000 +#define AIPS1_BASE_ADDR_VIRT 0xFC000000 +#define AIPS1_SIZE SZ_1M + +#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000) +#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000) +#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000) +#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000) +#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000) +#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000) +#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000) +#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000) +#define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000) +#define ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000) +#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000) +#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000) +#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000) +#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000) +#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000) +#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000) +#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000) +#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000) +#define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000) +#define UART5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000) +#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000) +#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000) + +/* + * SPBA global module enabled #0 + */ +#define SPBA0_BASE_ADDR 0x50000000 +#define SPBA0_BASE_ADDR_VIRT 0xFC100000 +#define SPBA0_SIZE SZ_1M + +#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000) +#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000) +#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) +#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000) +#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000) +#define SIM1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00018000) +#define IIM_BASE_ADDR (SPBA0_BASE_ADDR + 0x0001C000) +#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000) +#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) +#define MSHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) +#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000) + +/* + * AIPS 2 + */ +#define AIPS2_BASE_ADDR 0x53F00000 +#define AIPS2_BASE_ADDR_VIRT 0xFC200000 +#define AIPS2_SIZE SZ_1M +#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000) +#define CSPI3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000) +#define FIRI_BASE_ADDR (AIPS2_BASE_ADDR + 0x0008C000) +#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000) +#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000) +#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000) +#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000) +#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000) +#define SCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AE000) +#define SMN_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AF000) +#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000) +#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000) +#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000) +#define MPEG4_ENC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C8000) +#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000) +#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000) +#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000) +#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000) +#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000) +#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000) +#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000) + +/* + * ROMP and AVIC + */ +#define ROMP_BASE_ADDR 0x60000000 +#define ROMP_BASE_ADDR_VIRT 0xFC500000 +#define ROMP_SIZE SZ_1M + +#define AVIC_BASE_ADDR 0x68000000 +#define AVIC_BASE_ADDR_VIRT 0xFC400000 +#define AVIC_SIZE SZ_1M + +/* + * NAND, SDRAM, WEIM, M3IF, EMI controllers + */ +#define X_MEMC_BASE_ADDR 0xB8000000 +#define X_MEMC_BASE_ADDR_VIRT 0xFC320000 +#define X_MEMC_SIZE SZ_64K + +#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000) +#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) +#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) +#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) +#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) +#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR + +/* + * Memory regions and CS + */ +#define IPU_MEM_BASE_ADDR 0x70000000 +#define CSD0_BASE_ADDR 0x80000000 +#define CSD1_BASE_ADDR 0x90000000 +#define CS0_BASE_ADDR 0xA0000000 +#define CS1_BASE_ADDR 0xA8000000 +#define CS2_BASE_ADDR 0xB0000000 +#define CS3_BASE_ADDR 0xB2000000 + +#define CS4_BASE_ADDR 0xB4000000 +#define CS4_BASE_ADDR_VIRT 0xF4000000 +#define CS4_SIZE SZ_32M + +#define CS5_BASE_ADDR 0xB6000000 +#define PCMCIA_MEM_BASE_ADDR 0xBC000000 + +/*! + * This macro defines the physical to virtual address mapping for all the + * peripheral modules. It is used by passing in the physical address as x + * and returning the virtual address. If the physical address is not mapped, + * it returns 0xDEADBEEF + */ +#define IO_ADDRESS(x) \ + (((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\ + ((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\ + ((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\ + ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\ + ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\ + ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\ + ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\ + ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\ + ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\ + 0xDEADBEEF) + +/* + * define the address mapping macros: in physical address order + */ + +#define IRAM_IO_ADDRESS(x) \ + (((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT) + +#define L2CC_IO_ADDRESS(x) \ + (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT) + +#define AIPS1_IO_ADDRESS(x) \ + (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT) + +#define SPBA0_IO_ADDRESS(x) \ + (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT) + +#define AIPS2_IO_ADDRESS(x) \ + (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT) + +#define ROMP_IO_ADDRESS(x) \ + (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT) + +#define AVIC_IO_ADDRESS(x) \ + (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT) + +#define CS4_IO_ADDRESS(x) \ + (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) + +#define X_MEMC_IO_ADDRESS(x) \ + (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) + +#define PCMCIA_IO_ADDRESS(x) \ + (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) + +/* Start of physical RAM - On many MX31 platforms, this is the first SDRAM bank (CSD0) */ +#define PHYS_OFFSET CSD0_BASE_ADDR + +/* + * Interrupt numbers + */ +#define MXC_INT_PEN_ADS7843 0 +#define MXC_INT_RESV1 1 +#define MXC_INT_CS8900A 2 +#define MXC_INT_I2C3 3 +#define MXC_INT_I2C2 4 +#define MXC_INT_MPEG4_ENCODER 5 +#define MXC_INT_RTIC 6 +#define MXC_INT_FIRI 7 +#define MXC_INT_MMC_SDHC2 8 +#define MXC_INT_MMC_SDHC1 9 +#define MXC_INT_I2C 10 +#define MXC_INT_SSI2 11 +#define MXC_INT_SSI1 12 +#define MXC_INT_CSPI2 13 +#define MXC_INT_CSPI1 14 +#define MXC_INT_ATA 15 +#define MXC_INT_MBX 16 +#define MXC_INT_CSPI3 17 +#define MXC_INT_UART3 18 +#define MXC_INT_IIM 19 +#define MXC_INT_SIM2 20 +#define MXC_INT_SIM1 21 +#define MXC_INT_RNGA 22 +#define MXC_INT_EVTMON 23 +#define MXC_INT_KPP 24 +#define MXC_INT_RTC 25 +#define MXC_INT_PWM 26 +#define MXC_INT_EPIT2 27 +#define MXC_INT_EPIT1 28 +#define MXC_INT_GPT 29 +#define MXC_INT_RESV30 30 +#define MXC_INT_RESV31 31 +#define MXC_INT_UART2 32 +#define MXC_INT_NANDFC 33 +#define MXC_INT_SDMA 34 +#define MXC_INT_USB1 35 +#define MXC_INT_USB2 36 +#define MXC_INT_USB3 37 +#define MXC_INT_USB4 38 +#define MXC_INT_MSHC1 39 +#define MXC_INT_MSHC2 40 +#define MXC_INT_IPU_ERR 41 +#define MXC_INT_IPU_SYN 42 +#define MXC_INT_RESV43 43 +#define MXC_INT_RESV44 44 +#define MXC_INT_UART1 45 +#define MXC_INT_UART4 46 +#define MXC_INT_UART5 47 +#define MXC_INT_ECT 48 +#define MXC_INT_SCC_SCM 49 +#define MXC_INT_SCC_SMN 50 +#define MXC_INT_GPIO2 51 +#define MXC_INT_GPIO1 52 +#define MXC_INT_CCM 53 +#define MXC_INT_PCMCIA 54 +#define MXC_INT_WDOG 55 +#define MXC_INT_GPIO3 56 +#define MXC_INT_RESV57 57 +#define MXC_INT_EXT_POWER 58 +#define MXC_INT_EXT_TEMPER 59 +#define MXC_INT_EXT_SENSOR60 60 +#define MXC_INT_EXT_SENSOR61 61 +#define MXC_INT_EXT_WDOG 62 +#define MXC_INT_EXT_TV 63 + +#define MXC_MAX_INT_LINES 64 + +#define MXC_GPIO_INT_BASE MXC_MAX_INT_LINES + +/*! + * Number of GPIO port as defined in the IC Spec + */ +#define GPIO_PORT_NUM 3 +/*! + * Number of GPIO pins per port + */ +#define GPIO_NUM_PIN 32 + +#define PROD_SIGNATURE 0x1 /* For MX31 */ + +#define SYSTEM_REV_MIN CHIP_REV_1_0 +#define SYSTEM_REV_NUM 3 + +#endif /* __ASM_ARCH_MXC_MX31_H__ */ diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h new file mode 100644 index 000000000000..0837f1f9ca31 --- /dev/null +++ b/include/asm-arm/arch-mxc/mxc.h @@ -0,0 +1,149 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_H__ +#define __ASM_ARCH_MXC_H__ + +#ifndef __ASM_ARCH_MXC_HARDWARE_H__ +#error "Do not include directly." +#endif + +/* + ***************************************** + * GPT Register definitions * + ***************************************** + */ +#define MXC_GPT_GPTCR IO_ADDRESS(GPT1_BASE_ADDR + 0x00) +#define MXC_GPT_GPTPR IO_ADDRESS(GPT1_BASE_ADDR + 0x04) +#define MXC_GPT_GPTSR IO_ADDRESS(GPT1_BASE_ADDR + 0x08) +#define MXC_GPT_GPTIR IO_ADDRESS(GPT1_BASE_ADDR + 0x0C) +#define MXC_GPT_GPTOCR1 IO_ADDRESS(GPT1_BASE_ADDR + 0x10) +#define MXC_GPT_GPTOCR2 IO_ADDRESS(GPT1_BASE_ADDR + 0x14) +#define MXC_GPT_GPTOCR3 IO_ADDRESS(GPT1_BASE_ADDR + 0x18) +#define MXC_GPT_GPTICR1 IO_ADDRESS(GPT1_BASE_ADDR + 0x1C) +#define MXC_GPT_GPTICR2 IO_ADDRESS(GPT1_BASE_ADDR + 0x20) +#define MXC_GPT_GPTCNT IO_ADDRESS(GPT1_BASE_ADDR + 0x24) + +/*! + * GPT Control register bit definitions + */ +#define GPTCR_FO3 (1 << 31) +#define GPTCR_FO2 (1 << 30) +#define GPTCR_FO1 (1 << 29) + +#define GPTCR_OM3_SHIFT 26 +#define GPTCR_OM3_MASK (7 << GPTCR_OM3_SHIFT) +#define GPTCR_OM3_DISCONNECTED (0 << GPTCR_OM3_SHIFT) +#define GPTCR_OM3_TOGGLE (1 << GPTCR_OM3_SHIFT) +#define GPTCR_OM3_CLEAR (2 << GPTCR_OM3_SHIFT) +#define GPTCR_OM3_SET (3 << GPTCR_OM3_SHIFT) +#define GPTCR_OM3_GENERATE_LOW (7 << GPTCR_OM3_SHIFT) + +#define GPTCR_OM2_SHIFT 23 +#define GPTCR_OM2_MASK (7 << GPTCR_OM2_SHIFT) +#define GPTCR_OM2_DISCONNECTED (0 << GPTCR_OM2_SHIFT) +#define GPTCR_OM2_TOGGLE (1 << GPTCR_OM2_SHIFT) +#define GPTCR_OM2_CLEAR (2 << GPTCR_OM2_SHIFT) +#define GPTCR_OM2_SET (3 << GPTCR_OM2_SHIFT) +#define GPTCR_OM2_GENERATE_LOW (7 << GPTCR_OM2_SHIFT) + +#define GPTCR_OM1_SHIFT 20 +#define GPTCR_OM1_MASK (7 << GPTCR_OM1_SHIFT) +#define GPTCR_OM1_DISCONNECTED (0 << GPTCR_OM1_SHIFT) +#define GPTCR_OM1_TOGGLE (1 << GPTCR_OM1_SHIFT) +#define GPTCR_OM1_CLEAR (2 << GPTCR_OM1_SHIFT) +#define GPTCR_OM1_SET (3 << GPTCR_OM1_SHIFT) +#define GPTCR_OM1_GENERATE_LOW (7 << GPTCR_OM1_SHIFT) + +#define GPTCR_IM2_SHIFT 18 +#define GPTCR_IM2_MASK (3 << GPTCR_IM2_SHIFT) +#define GPTCR_IM2_CAPTURE_DISABLE (0 << GPTCR_IM2_SHIFT) +#define GPTCR_IM2_CAPTURE_RISING (1 << GPTCR_IM2_SHIFT) +#define GPTCR_IM2_CAPTURE_FALLING (2 << GPTCR_IM2_SHIFT) +#define GPTCR_IM2_CAPTURE_BOTH (3 << GPTCR_IM2_SHIFT) + +#define GPTCR_IM1_SHIFT 16 +#define GPTCR_IM1_MASK (3 << GPTCR_IM1_SHIFT) +#define GPTCR_IM1_CAPTURE_DISABLE (0 << GPTCR_IM1_SHIFT) +#define GPTCR_IM1_CAPTURE_RISING (1 << GPTCR_IM1_SHIFT) +#define GPTCR_IM1_CAPTURE_FALLING (2 << GPTCR_IM1_SHIFT) +#define GPTCR_IM1_CAPTURE_BOTH (3 << GPTCR_IM1_SHIFT) + +#define GPTCR_SWR (1 << 15) +#define GPTCR_FRR (1 << 9) + +#define GPTCR_CLKSRC_SHIFT 6 +#define GPTCR_CLKSRC_MASK (7 << GPTCR_CLKSRC_SHIFT) +#define GPTCR_CLKSRC_NOCLOCK (0 << GPTCR_CLKSRC_SHIFT) +#define GPTCR_CLKSRC_HIGHFREQ (2 << GPTCR_CLKSRC_SHIFT) +#define GPTCR_CLKSRC_CLKIN (3 << GPTCR_CLKSRC_SHIFT) +#define GPTCR_CLKSRC_CLK32K (7 << GPTCR_CLKSRC_SHIFT) + +#define GPTCR_STOPEN (1 << 5) +#define GPTCR_DOZEN (1 << 4) +#define GPTCR_WAITEN (1 << 3) +#define GPTCR_DBGEN (1 << 2) + +#define GPTCR_ENMOD (1 << 1) +#define GPTCR_ENABLE (1 << 0) + +#define GPTSR_OF1 (1 << 0) +#define GPTSR_OF2 (1 << 1) +#define GPTSR_OF3 (1 << 2) +#define GPTSR_IF1 (1 << 3) +#define GPTSR_IF2 (1 << 4) +#define GPTSR_ROV (1 << 5) + +#define GPTIR_OF1IE GPTSR_OF1 +#define GPTIR_OF2IE GPTSR_OF2 +#define GPTIR_OF3IE GPTSR_OF3 +#define GPTIR_IF1IE GPTSR_IF1 +#define GPTIR_IF2IE GPTSR_IF2 +#define GPTIR_ROVIE GPTSR_ROV + +/* + ***************************************** + * AVIC Registers * + ***************************************** + */ +#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR) +#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */ +#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */ +#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */ +#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */ +#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */ +#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */ +#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */ +#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */ +#define AVIC_NIPRIORITY7 (AVIC_BASE + 0x20) /* norm int priority lvl7 */ +#define AVIC_NIPRIORITY6 (AVIC_BASE + 0x24) /* norm int priority lvl6 */ +#define AVIC_NIPRIORITY5 (AVIC_BASE + 0x28) /* norm int priority lvl5 */ +#define AVIC_NIPRIORITY4 (AVIC_BASE + 0x2C) /* norm int priority lvl4 */ +#define AVIC_NIPRIORITY3 (AVIC_BASE + 0x30) /* norm int priority lvl3 */ +#define AVIC_NIPRIORITY2 (AVIC_BASE + 0x34) /* norm int priority lvl2 */ +#define AVIC_NIPRIORITY1 (AVIC_BASE + 0x38) /* norm int priority lvl1 */ +#define AVIC_NIPRIORITY0 (AVIC_BASE + 0x3C) /* norm int priority lvl0 */ +#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */ +#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */ +#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */ +#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */ +#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */ +#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */ +#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */ +#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */ +#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */ +#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */ + +#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20) +#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24) +#define IIM_PROD_REV_SH 3 +#define IIM_PROD_REV_LEN 5 + +#endif /* __ASM_ARCH_MXC_H__ */ diff --git a/include/asm-arm/arch-mxc/system.h b/include/asm-arm/arch-mxc/system.h new file mode 100644 index 000000000000..109956b41aca --- /dev/null +++ b/include/asm-arm/arch-mxc/system.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MXC_SYSTEM_H__ +#define __ASM_ARCH_MXC_SYSTEM_H__ + +/*! + * @file system.h + * @brief This file contains idle and reset functions. + * + * @ingroup System + */ + +/*! + * This function puts the CPU into idle mode. It is called by default_idle() + * in process.c file. + */ +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +/* + * This function resets the system. It is called by machine_restart(). + * + * @param mode indicates different kinds of resets + */ +static inline void arch_reset(char mode) +{ + cpu_reset(0); +} + +#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ diff --git a/include/asm-arm/arch-mxc/timex.h b/include/asm-arm/arch-mxc/timex.h new file mode 100644 index 000000000000..59019fa58f82 --- /dev/null +++ b/include/asm-arm/arch-mxc/timex.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 1999 ARM Limited + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MXC_TIMEX_H__ +#define __ASM_ARCH_MXC_TIMEX_H__ + +#include /* for CLOCK_TICK_RATE */ + +#endif /* __ASM_ARCH_MXC_TIMEX_H__ */ diff --git a/include/asm-arm/arch-mxc/uncompress.h b/include/asm-arm/arch-mxc/uncompress.h new file mode 100644 index 000000000000..ec5787d0e78c --- /dev/null +++ b/include/asm-arm/arch-mxc/uncompress.h @@ -0,0 +1,79 @@ +/* + * include/asm-arm/arch-mxc/uncompress.h + * + * + * + * Copyright (C) 1999 ARM Limited + * Copyright (C) Shane Nay (shane@minirl.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__ +#define __ASM_ARCH_MXC_UNCOMPRESS_H__ + +#define __MXC_BOOT_UNCOMPRESS + +#include +#include + +#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) + +#define USR2 0x98 +#define USR2_TXFE (1<<14) +#define TXR 0x40 +#define UCR1 0x80 +#define UCR1_UARTEN 1 + +/* + * The following code assumes the serial port has already been + * initialized by the bootloader. We search for the first enabled + * port in the most probable order. If you didn't setup a port in + * your bootloader then nothing will appear (which might be desired). + * + * This does not append a newline + */ + +static void putc(int ch) +{ + static unsigned long serial_port = 0; + + if (unlikely(serial_port == 0)) { + do { + serial_port = UART1_BASE_ADDR; + if (UART(UCR1) & UCR1_UARTEN) + break; + serial_port = UART2_BASE_ADDR; + if (UART(UCR1) & UCR1_UARTEN) + break; + return; + } while (0); + } + + while (!(UART(USR2) & USR2_TXFE)) + cpu_relax(); + + UART(TXR) = ch; +} + +#define flush() do { } while (0) + +/* + * nothing to do + */ +#define arch_decomp_setup() + +#define arch_decomp_wdog() + +#endif /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */ diff --git a/include/asm-arm/arch-mxc/vmalloc.h b/include/asm-arm/arch-mxc/vmalloc.h new file mode 100644 index 000000000000..83a73da895eb --- /dev/null +++ b/include/asm-arm/arch-mxc/vmalloc.h @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2000 Russell King. + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MXC_VMALLOC_H__ +#define __ASM_ARCH_MXC_VMALLOC_H__ + +/*! + * @file vmalloc.h + * + * @brief This file contains platform specific macros for vmalloc. + * + * @ingroup System + */ + +/*! + * vmalloc ending address + */ +#define VMALLOC_END 0xF4000000 + +#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */ From 531b617c71e780b14af5931428e0611f930c2134 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:05:25 +0100 Subject: [PATCH 44/60] [ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c This patch moves items of the s3c24xx support into a new plat-s3c directory for items that use the s3c24xx support but are not directly s3c24xx compatible, such as the s3c2400 and s3c6400. git mv commands: git mv include/asm-arm/arch-s3c2410/iic.h include/asm-arm/plat-s3c/iic.h git mv include/asm-arm/arch-s3c2410/nand.h include/asm-arm/plat-s3c/nand.h git mv include/asm-arm/arch-s3c2410/regs-iic.h include/asm-arm/plat-s3c/regs-iic.h git mv include/asm-arm/arch-s3c2410/regs-nand.h include/asm-arm/plat-s3c/regs-nand.h git mv include/asm-arm/arch-s3c2410/regs-rtc.h include/asm-arm/plat-s3c/regs-rtc.h git mv include/asm-arm/arch-s3c2410/regs-serial.h include/asm-arm/plat-s3c/regs-serial.h git mv include/asm-arm/arch-s3c2410/regs-timer.h include/asm-arm/plat-s3c/regs-timer.h git mv include/asm-arm/arch-s3c2410/regs-watchdog.h include/asm-arm/plat-s3c/regs-watchdog.h Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/clock.c | 2 +- arch/arm/mach-s3c2410/dma.c | 2 +- arch/arm/mach-s3c2410/mach-amlm5900.c | 2 +- arch/arm/mach-s3c2410/mach-bast.c | 6 +++--- arch/arm/mach-s3c2410/mach-h1940.c | 2 +- arch/arm/mach-s3c2410/mach-n30.c | 4 ++-- arch/arm/mach-s3c2410/mach-otom.c | 2 +- arch/arm/mach-s3c2410/mach-qt2410.c | 4 ++-- arch/arm/mach-s3c2410/mach-smdk2410.c | 2 +- arch/arm/mach-s3c2410/mach-vr1000.c | 2 +- arch/arm/mach-s3c2410/s3c2410.c | 3 +-- arch/arm/mach-s3c2410/sleep.S | 2 +- arch/arm/mach-s3c2412/clock.c | 2 +- arch/arm/mach-s3c2412/dma.c | 2 +- arch/arm/mach-s3c2412/mach-smdk2413.c | 2 +- arch/arm/mach-s3c2412/mach-vstms.c | 4 ++-- arch/arm/mach-s3c2412/s3c2412.c | 2 +- arch/arm/mach-s3c2440/dma.c | 2 +- arch/arm/mach-s3c2440/mach-anubis.c | 4 ++-- arch/arm/mach-s3c2440/mach-nexcoder.c | 2 +- arch/arm/mach-s3c2440/mach-osiris.c | 4 ++-- arch/arm/mach-s3c2440/mach-rx3715.c | 4 ++-- arch/arm/mach-s3c2440/mach-smdk2440.c | 2 +- arch/arm/mach-s3c2443/dma.c | 2 +- arch/arm/mach-s3c2443/mach-smdk2443.c | 2 +- arch/arm/plat-s3c24xx/common-smdk.c | 2 +- arch/arm/plat-s3c24xx/cpu.c | 2 +- arch/arm/plat-s3c24xx/devs.c | 2 +- arch/arm/plat-s3c24xx/pm.c | 2 +- arch/arm/plat-s3c24xx/s3c244x.c | 2 +- arch/arm/plat-s3c24xx/sleep.S | 2 +- arch/arm/plat-s3c24xx/time.c | 2 +- drivers/serial/s3c2410.c | 2 +- include/asm-arm/arch-s3c2410/debug-macro.S | 2 +- include/asm-arm/arch-s3c2410/system.h | 2 +- include/asm-arm/arch-s3c2410/uncompress.h | 4 ++-- include/asm-arm/{arch-s3c2410 => plat-s3c}/iic.h | 0 include/asm-arm/{arch-s3c2410 => plat-s3c}/nand.h | 0 include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-iic.h | 0 include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-nand.h | 0 include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-rtc.h | 0 include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-serial.h | 0 include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-timer.h | 0 include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-watchdog.h | 0 44 files changed, 45 insertions(+), 46 deletions(-) rename include/asm-arm/{arch-s3c2410 => plat-s3c}/iic.h (100%) rename include/asm-arm/{arch-s3c2410 => plat-s3c}/nand.h (100%) rename include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-iic.h (100%) rename include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-nand.h (100%) rename include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-rtc.h (100%) rename include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-serial.h (100%) rename include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-timer.h (100%) rename include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-watchdog.h (100%) diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 5b4831c4c1d8..cab9d6265e9e 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -37,7 +37,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 67d1ad363973..5620ca4d1083 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -23,7 +23,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 435adcce6482..43bb5e106302 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -48,7 +48,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 8b52ea95d4f6..bc926992b4e4 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -36,13 +36,13 @@ #include //#include -#include +#include #include #include #include -#include -#include +#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 5c9bcea74767..4102235e085b 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -30,7 +30,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 412e50c3d28a..621f548da610 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -33,9 +33,9 @@ #include #include -#include +#include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index 1f899fa588df..717af40e4477 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -29,7 +29,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index d86e6f18bac9..6cb4a0d2cb4a 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -49,9 +49,9 @@ #include #include -#include +#include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index 5852d300d52f..226550504c85 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -47,7 +47,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 7b624bb00490..9f43f3f124f5 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -39,7 +39,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 1a86a9803753..e580303cb0ab 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -29,7 +29,7 @@ #include #include -#include +#include #include #include @@ -40,7 +40,6 @@ static struct map_desc s3c2410_iodesc[] __initdata = { IODESC_ENT(CLKPWR), - IODESC_ENT(LCD), IODESC_ENT(TIMER), IODESC_ENT(WATCHDOG), }; diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S index d1eeed2ad47c..8a9c5a2bb252 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c2410/sleep.S @@ -32,7 +32,7 @@ #include #include #include -#include +#include /* s3c2410_cpu_suspend * diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index 6a8e4448770b..8543dd6df391 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -37,7 +37,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 668cccefe7b0..48413df88e20 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -24,7 +24,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index 063af09f899d..bbc609c3e622 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -32,7 +32,7 @@ #include //#include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index f2fbd65956ac..32982547cd63 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -33,14 +33,14 @@ #include #include -#include +#include #include #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 782b5814ced2..12995d859b2c 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -34,7 +34,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index cd035a3ec878..13e4be3392be 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -23,7 +23,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 29c163d300d4..3d3dfa95db8e 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -34,11 +34,11 @@ #include #include -#include +#include #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 5e61f2166c76..afe0d7b7e389 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -36,7 +36,7 @@ //#include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 89f4c9c5777b..0ba7e9060c7b 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -31,11 +31,11 @@ #include #include -#include +#include #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 866ff71c01dd..b59e6d39f2f2 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -38,12 +38,12 @@ #include #include -#include +#include #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index e167254e232e..670115b8a12e 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -31,7 +31,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index f70e8ccffc3d..d8bb4345b48a 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -24,7 +24,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c index b1eb709ee65a..8cd93130ef36 100644 --- a/arch/arm/mach-s3c2443/mach-smdk2443.c +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c @@ -31,7 +31,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 7ed19b23ce56..398c7ac25296 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -38,7 +38,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 8ce4904d3131..f513ab083b8f 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -38,7 +38,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 5875da0ae0eb..9941508614e4 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -28,7 +28,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 5692eccdf4d1..eab1850616d8 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -40,7 +40,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index 767f2e9a3a55..8b2d47f2e80e 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -30,7 +30,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index 7b7ae790b00d..d47113bbc34c 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -32,7 +32,7 @@ #include #include #include -#include +#include /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not * reset the UART configuration, only enable if you really need this! diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c index b7667375bcec..2ec1daaa0e53 100644 --- a/arch/arm/plat-s3c24xx/time.c +++ b/arch/arm/plat-s3c24xx/time.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 10bc0209cd66..3f26c4b2f322 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -78,7 +78,7 @@ #include -#include +#include #include /* structures */ diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S index 93064860e0e5..90dfba45a291 100644 --- a/include/asm-arm/arch-s3c2410/debug-macro.S +++ b/include/asm-arm/arch-s3c2410/debug-macro.S @@ -13,7 +13,7 @@ */ #include -#include +#include #include #define S3C2410_UART1_OFF (0x4000) diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h index 1c74ef17da33..63891786dfa0 100644 --- a/include/asm-arm/arch-s3c2410/system.h +++ b/include/asm-arm/arch-s3c2410/system.h @@ -17,7 +17,7 @@ #include #include -#include +#include #include void (*s3c24xx_idle)(void); diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h index dcb2cef38f50..295c89c8ff2c 100644 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -16,9 +16,9 @@ typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ /* defines for UART registers */ -#include "asm/arch/regs-serial.h" +#include "asm/plat-s3c/regs-serial.h" #include "asm/arch/regs-gpio.h" -#include "asm/arch/regs-watchdog.h" +#include "asm/plat-s3c/regs-watchdog.h" #include diff --git a/include/asm-arm/arch-s3c2410/iic.h b/include/asm-arm/plat-s3c/iic.h similarity index 100% rename from include/asm-arm/arch-s3c2410/iic.h rename to include/asm-arm/plat-s3c/iic.h diff --git a/include/asm-arm/arch-s3c2410/nand.h b/include/asm-arm/plat-s3c/nand.h similarity index 100% rename from include/asm-arm/arch-s3c2410/nand.h rename to include/asm-arm/plat-s3c/nand.h diff --git a/include/asm-arm/arch-s3c2410/regs-iic.h b/include/asm-arm/plat-s3c/regs-iic.h similarity index 100% rename from include/asm-arm/arch-s3c2410/regs-iic.h rename to include/asm-arm/plat-s3c/regs-iic.h diff --git a/include/asm-arm/arch-s3c2410/regs-nand.h b/include/asm-arm/plat-s3c/regs-nand.h similarity index 100% rename from include/asm-arm/arch-s3c2410/regs-nand.h rename to include/asm-arm/plat-s3c/regs-nand.h diff --git a/include/asm-arm/arch-s3c2410/regs-rtc.h b/include/asm-arm/plat-s3c/regs-rtc.h similarity index 100% rename from include/asm-arm/arch-s3c2410/regs-rtc.h rename to include/asm-arm/plat-s3c/regs-rtc.h diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/plat-s3c/regs-serial.h similarity index 100% rename from include/asm-arm/arch-s3c2410/regs-serial.h rename to include/asm-arm/plat-s3c/regs-serial.h diff --git a/include/asm-arm/arch-s3c2410/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h similarity index 100% rename from include/asm-arm/arch-s3c2410/regs-timer.h rename to include/asm-arm/plat-s3c/regs-timer.h diff --git a/include/asm-arm/arch-s3c2410/regs-watchdog.h b/include/asm-arm/plat-s3c/regs-watchdog.h similarity index 100% rename from include/asm-arm/arch-s3c2410/regs-watchdog.h rename to include/asm-arm/plat-s3c/regs-watchdog.h From d58153d86589b6bba2dd19f4c178252f8cf2ed4f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:07:09 +0100 Subject: [PATCH 45/60] [ARM] 4509/1: S3C: Create initial arch/arm/plat-s3c Create the initial arch/arm/plat-s3c directory and start linking it into the arch/arm build heirarchy ready to receive the generic parts of the S3C24XX support to be used when adding S3C6400 devices. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/plat-s3c/Kconfig | 76 +++++++++++++++++++++++++++++++++++ arch/arm/plat-s3c24xx/Kconfig | 60 +-------------------------- 3 files changed, 78 insertions(+), 59 deletions(-) create mode 100644 arch/arm/plat-s3c/Kconfig diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a44c6da9bf83..950de3644f10 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -432,6 +432,7 @@ source "arch/arm/mach-omap1/Kconfig" source "arch/arm/mach-omap2/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" +source "arch/arm/plat-s3c/Kconfig" if ARCH_S3C2410 source "arch/arm/mach-s3c2400/Kconfig" diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig new file mode 100644 index 000000000000..21435c2c26aa --- /dev/null +++ b/arch/arm/plat-s3c/Kconfig @@ -0,0 +1,76 @@ +# arch/arm/plat-s3c/Kconfig +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +config PLAT_S3C + bool + depends on ARCH_S3C2410 + default y if ARCH_S3C2410 + select NO_IOPORT + help + Base platform code for any Samsung S3C device + +comment "Boot options" + +config S3C2410_BOOT_WATCHDOG + bool "S3C2410 Initialisation watchdog" + depends on PLAT_S3C && S3C2410_WATCHDOG + help + Say y to enable the watchdog during the kernel decompression + stage. If the kernel fails to uncompress, then the watchdog + will trigger a reset and the system should restart. + +config S3C2410_BOOT_ERROR_RESET + bool "S3C2410 Reboot on decompression error" + depends on PLAT_S3C + help + Say y here to use the watchdog to reset the system if the + kernel decompressor detects an error during decompression. + +comment "Power management" + +config S3C2410_PM_DEBUG + bool "S3C2410 PM Suspend debug" + depends on PLAT_S3C && PM + help + Say Y here if you want verbose debugging from the PM Suspend and + Resume code. See + for more information. + +config S3C2410_PM_CHECK + bool "S3C2410 PM Suspend Memory CRC" + depends on PLAT_S3C && PM && CRC32 + help + Enable the PM code's memory area checksum over sleep. This option + will generate CRCs of all blocks of memory, and store them before + going to sleep. The blocks are then checked on resume for any + errors. + + Note, this can take several seconds depending on memory size + and CPU speed. + + See + +config S3C2410_PM_CHECK_CHUNKSIZE + int "S3C2410 PM Suspend CRC Chunksize (KiB)" + depends on PLAT_S3C && PM && S3C2410_PM_CHECK + default 64 + help + Set the chunksize in Kilobytes of the CRC for checking memory + corruption over suspend and resume. A smaller value will mean that + the CRC data block will take more memory, but wil identify any + faults with better precision. + + See + +config S3C2410_LOWLEVEL_UART_PORT + int "S3C2410 UART to use for low-level messages" + depends on PLAT_S3C + default 0 + help + Choice of which UART port to use for the low-level messages, + such as the `Uncompressing...` at start time. The value of + this configuration should be between zero and two. The port + must have been initialised by the boot-loader before use. diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index b972f36d547c..b66fb3c4e228 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -10,7 +10,7 @@ config PLAT_S3C24XX default y if ARCH_S3C2410 select NO_IOPORT help - Base platform code for any Samsung S3C device + Base platform code for any Samsung S3C24XX device if PLAT_S3C24XX @@ -26,64 +26,6 @@ config PM_SIMTEC Common power management code for systems that are compatible with the Simtec style of power management -config S3C2410_BOOT_WATCHDOG - bool "S3C2410 Initialisation watchdog" - depends on ARCH_S3C2410 && S3C2410_WATCHDOG - help - Say y to enable the watchdog during the kernel decompression - stage. If the kernel fails to uncompress, then the watchdog - will trigger a reset and the system should restart. - -config S3C2410_BOOT_ERROR_RESET - bool "S3C2410 Reboot on decompression error" - depends on ARCH_S3C2410 - help - Say y here to use the watchdog to reset the system if the - kernel decompressor detects an error during decompression. - -config S3C2410_PM_DEBUG - bool "S3C2410 PM Suspend debug" - depends on ARCH_S3C2410 && PM - help - Say Y here if you want verbose debugging from the PM Suspend and - Resume code. See - for more information. - -config S3C2410_PM_CHECK - bool "S3C2410 PM Suspend Memory CRC" - depends on ARCH_S3C2410 && PM && CRC32 - help - Enable the PM code's memory area checksum over sleep. This option - will generate CRCs of all blocks of memory, and store them before - going to sleep. The blocks are then checked on resume for any - errors. - - Note, this can take several seconds depending on memory size - and CPU speed. - - See - -config S3C2410_PM_CHECK_CHUNKSIZE - int "S3C2410 PM Suspend CRC Chunksize (KiB)" - depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK - default 64 - help - Set the chunksize in Kilobytes of the CRC for checking memory - corruption over suspend and resume. A smaller value will mean that - the CRC data block will take more memory, but wil identify any - faults with better precision. - - See - -config S3C2410_LOWLEVEL_UART_PORT - int "S3C2410 UART to use for low-level messages" - default 0 - help - Choice of which UART port to use for the low-level messages, - such as the `Uncompressing...` at start time. The value of - this configuration should be between zero and two. The port - must have been initialised by the boot-loader before use. - config S3C2410_DMA bool "S3C2410 DMA support" depends on ARCH_S3C2410 From 498e03b619638826a7364faed61eb0a3d2a0f0c8 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:08:48 +0100 Subject: [PATCH 46/60] [ARM] 4510/1: S3C: split debug-macro support into plat-s3c Move the common parts of the debug macros into include/asm-arm/plat-s3c ready to be used for the common S3C support. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/debug-macro.S | 52 ++++---------------- include/asm-arm/plat-s3c/debug-macro.S | 57 ++++++++++++++++++++++ 2 files changed, 66 insertions(+), 43 deletions(-) create mode 100644 include/asm-arm/plat-s3c/debug-macro.S diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S index 90dfba45a291..b0a44178b14e 100644 --- a/include/asm-arm/arch-s3c2410/debug-macro.S +++ b/include/asm-arm/arch-s3c2410/debug-macro.S @@ -13,13 +13,15 @@ */ #include -#include #include +#include +#include + #define S3C2410_UART1_OFF (0x4000) #define SHIFT_2440TXF (14-9) - .macro addruart, rx + .macro addruart, rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 ldreq \rx, = S3C24XX_PA_UART @@ -27,18 +29,9 @@ #if CONFIG_DEBUG_S3C2410_UART != 0 add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART) #endif - .endm + .endm - .macro senduart,rd,rx - strb \rd, [\rx, # S3C2410_UTXH ] - .endm - - .macro busyuart, rd, rx - ldr \rd, [ \rx, # S3C2410_UFCON ] - tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? - beq 1001f @ - @ FIFO enabled... -1003: + .macro fifo_full rd, rx @ check for arm920 vs arm926. currently assume all arm926 @ devices have an 64 byte FIFO identical to the s3c2440 mrc p15, 0, \rd, c0, c0 @@ -57,25 +50,9 @@ ldr \rd, [ \rx, # S3C2410_UFSTAT ] moveq \rd, \rd, lsr #SHIFT_2440TXF tst \rd, #S3C2410_UFSTAT_TXFULL - bne 1003b - b 1002f + .endm -1001: - @ busy waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] - tst \rd, #S3C2410_UTRSTAT_TXFE - beq 1001b - -1002: @ exit busyuart - .endm - - .macro waituart,rd,rx - - ldr \rd, [ \rx, # S3C2410_UFCON ] - tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? - beq 1001f @ - @ FIFO enabled... -1003: + .macro fifo_level rd, rx mrc p15, 0, \rd, c1, c0 tst \rd, #1 addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) @@ -88,15 +65,4 @@ ldr \rd, [ \rx, # S3C2410_UFSTAT ] andne \rd, \rd, #S3C2410_UFSTAT_TXMASK andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK - teq \rd, #0 - bne 1003b - b 1002f - -1001: - @ idle waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] - tst \rd, #S3C2410_UTRSTAT_TXFE - beq 1001b - -1002: @ exit busyuart - .endm + .endm diff --git a/include/asm-arm/plat-s3c/debug-macro.S b/include/asm-arm/plat-s3c/debug-macro.S new file mode 100644 index 000000000000..a43bbfa90a0b --- /dev/null +++ b/include/asm-arm/plat-s3c/debug-macro.S @@ -0,0 +1,57 @@ +/* linux/include/asm-arm/plat-s3c/debug-macro.S + * + * Copyright 2005, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include + +#define S3C2410_UART1_OFF (0x4000) + + .macro senduart,rd,rx + strb \rd, [\rx, # S3C2410_UTXH ] + .endm + + .macro busyuart, rd, rx + ldr \rd, [ \rx, # S3C2410_UFCON ] + tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? + beq 1001f @ + @ FIFO enabled... +1003: + fifo_full \rd, \rx + bne 1003b + b 1002f + +1001: + @ busy waiting for non fifo + ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + tst \rd, #S3C2410_UTRSTAT_TXFE + beq 1001b + +1002: @ exit busyuart + .endm + + .macro waituart,rd,rx + + ldr \rd, [ \rx, # S3C2410_UFCON ] + tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? + beq 1001f @ + @ FIFO enabled... +1003: + fifo_level \rd, \rx + teq \rd, #0 + bne 1003b + b 1002f +1001: + @ idle waiting for non fifo + ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + tst \rd, #S3C2410_UTRSTAT_TXFE + beq 1001b + +1002: @ exit busyuart + .endm From b2627588cbeb70364357048854affd52bf02fe64 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:09:44 +0100 Subject: [PATCH 47/60] [ARM] 4511/1: S3C: updated LLSERIAL Kconfig defines for CPU support Update the Kconfig to create configuration options based on which CPUs are supported for the low level serial code. This means that the debug macros can be optimised for the type(s) of CPU that are being used. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/Kconfig | 1 + arch/arm/mach-s3c2412/Kconfig | 1 + arch/arm/mach-s3c2440/Kconfig | 1 + arch/arm/mach-s3c2442/Kconfig | 1 + arch/arm/mach-s3c2443/Kconfig | 1 + arch/arm/plat-s3c/Kconfig | 28 ++++++++++++++++++++++++++++ 6 files changed, 33 insertions(+) diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index d4b013b283c3..e2079cf9266f 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -9,6 +9,7 @@ config CPU_S3C2410 depends on ARCH_S3C2410 select S3C2410_CLOCK select S3C2410_GPIO + select CPU_LLSERIAL_S3C2410 select S3C2410_PM if PM help Support for S3C2410 and S3C2410A family from the S3C24XX line diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index d5be5d053264..8e8fe48ea47f 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -7,6 +7,7 @@ config CPU_S3C2412 bool depends on ARCH_S3C2410 + select CPU_LLSERIAL_S3C2440 select S3C2412_PM if PM select S3C2412_DMA if S3C2410_DMA help diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index e3bfda098c0f..f1915bd61d15 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -12,6 +12,7 @@ config CPU_S3C2440 select S3C2410_GPIO select S3C2440_DMA if S3C2410_DMA select CPU_S3C244X + select CPU_LLSERIAL_S3C2440 help Support for S3C2440 Samsung Mobile CPU based systems. diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig index bf8d87abfab3..88d5fd34fe3b 100644 --- a/arch/arm/mach-s3c2442/Kconfig +++ b/arch/arm/mach-s3c2442/Kconfig @@ -11,6 +11,7 @@ config CPU_S3C2442 select S3C2410_GPIO select S3C2410_PM if PM select CPU_S3C244X + select CPU_LLSERIAL_S3C2440 help Support for S3C2442 Samsung Mobile CPU based systems. diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index c649bb2e7ce8..14252f573754 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -8,6 +8,7 @@ config CPU_S3C2443 bool depends on ARCH_S3C2410 select S3C2443_DMA if S3C2410_DMA + select CPU_LLSERIAL_S3C2440 help Support for the S3C2443 SoC from the S3C24XX line diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index 21435c2c26aa..6c206ab3a1d5 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -12,6 +12,34 @@ config PLAT_S3C help Base platform code for any Samsung S3C device +# low-level serial option nodes + +config CPU_LLSERIAL_S3C2410_ONLY + bool + depends on ARCH_S3C2410 + default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440 + +config CPU_LLSERIAL_S3C2440_ONLY + bool + depends on ARCH_S3C2410 + default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410 + +config CPU_LLSERIAL_S3C2410 + bool + depends on ARCH_S3C2410 + help + Selected if there is an S3C2410 (or register compatible) serial + low-level implementation needed + +config CPU_LLSERIAL_S3C2440 + bool + depends on ARCH_S3C2410 + help + Selected if there is an S3C2440 (or register compatible) serial + low-level implementation needed + +# boot configurations + comment "Boot options" config S3C2410_BOOT_WATCHDOG From cbc4dbffc89fbaada94ae7873ad6631a701fd00e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:10:23 +0100 Subject: [PATCH 48/60] [ARM] 4512/1: S3C: rename the debug macros for per-cpu updates Update the debug macros for use with the new per-cpu configuration and usage. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/debug-macro.S | 37 +++++++++++++++++++--- include/asm-arm/plat-s3c/debug-macro.S | 22 +++++++++++-- 2 files changed, 53 insertions(+), 6 deletions(-) diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S index b0a44178b14e..6fcef3383f8e 100644 --- a/include/asm-arm/arch-s3c2410/debug-macro.S +++ b/include/asm-arm/arch-s3c2410/debug-macro.S @@ -14,9 +14,7 @@ #include #include - #include -#include #define S3C2410_UART1_OFF (0x4000) #define SHIFT_2440TXF (14-9) @@ -31,7 +29,7 @@ #endif .endm - .macro fifo_full rd, rx + .macro fifo_full_s3c24xx rd, rx @ check for arm920 vs arm926. currently assume all arm926 @ devices have an 64 byte FIFO identical to the s3c2440 mrc p15, 0, \rd, c0, c0 @@ -52,7 +50,14 @@ tst \rd, #S3C2410_UFSTAT_TXFULL .endm - .macro fifo_level rd, rx + .macro fifo_full_s3c2410 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + tst \rd, #S3C2410_UFSTAT_TXFULL + .endm + +/* fifo level reading */ + + .macro fifo_level_s3c24xx rd, rx mrc p15, 0, \rd, c1, c0 tst \rd, #1 addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) @@ -66,3 +71,27 @@ andne \rd, \rd, #S3C2410_UFSTAT_TXMASK andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK .endm + + .macro fifo_level_s3c2410 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + and \rd, \rd, #S3C2410_UFSTAT_TXMASK + .endm + +/* Select the correct implementation depending on the configuration. The + * S3C2440 will get selected by default, as these are the most widely + * used variants of these +*/ + +#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY) +#define fifo_full fifo_full_s3c2410 +#define fifo_level fifo_level_s3c2410 +#warning 2410only +#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY) +#define fifo_full fifo_full_s3c24xx +#define fifo_level fifo_level_s3c24xx +#warning generic +#endif + +/* include the reset of the code which will do the work */ + +#include diff --git a/include/asm-arm/plat-s3c/debug-macro.S b/include/asm-arm/plat-s3c/debug-macro.S index a43bbfa90a0b..84c40b847da8 100644 --- a/include/asm-arm/plat-s3c/debug-macro.S +++ b/include/asm-arm/plat-s3c/debug-macro.S @@ -11,7 +11,26 @@ #include -#define S3C2410_UART1_OFF (0x4000) +/* The S3C2440 implementations are used by default as they are the + * most widely re-used */ + + .macro fifo_level_s3c2440 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + and \rd, \rd, #S3C2440_UFSTAT_TXMASK + .endm + +#ifndef fifo_level +#define fifo_level fifo_level_s3c2410 +#endif + + .macro fifo_full_s3c2440 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + tst \rd, #S3C2440_UFSTAT_TXFULL + .endm + +#ifndef fifo_full +#define fifo_full fifo_full_s3c2440 +#endif .macro senduart,rd,rx strb \rd, [\rx, # S3C2410_UTXH ] @@ -37,7 +56,6 @@ .endm .macro waituart,rd,rx - ldr \rd, [ \rx, # S3C2410_UFCON ] tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? beq 1001f @ From c76578460f1a0c4b77c33b2e8e295ccdfa893cdc Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:11:20 +0100 Subject: [PATCH 49/60] [ARM] 4513/1: S3C: Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT to be CONFIG_S3C_LOWLEVEL_UART_PORT as we move to using plat-s3c for base of S3C operations. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/Kconfig.debug | 2 +- arch/arm/boot/compressed/head.S | 2 +- arch/arm/configs/s3c2410_defconfig | 2 +- arch/arm/plat-s3c/Kconfig | 4 ++-- include/asm-arm/arch-s3c2410/uncompress.h | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 40c5eb1f55c7..7d067071dc6c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -100,6 +100,6 @@ config DEBUG_S3C2410_UART initialised by the boot-loader before use. The uncompressor code port configuration is now handled - by CONFIG_S3C2410_LOWLEVEL_UART_PORT. + by CONFIG_S3C_LOWLEVEL_UART_PORT. endmenu diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index d7fb5ee1637e..b9b03eda70e5 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -55,7 +55,7 @@ #elif defined(CONFIG_ARCH_S3C2410) .macro loadsp, rb mov \rb, #0x50000000 - add \rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT + add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT .endm #else .macro loadsp, rb diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 1d5150e4d6b3..0bdbbe0997f9 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -142,7 +142,7 @@ CONFIG_PM_SIMTEC=y # CONFIG_S3C2410_BOOT_ERROR_RESET is not set # CONFIG_S3C2410_PM_DEBUG is not set # CONFIG_S3C2410_PM_CHECK is not set -CONFIG_S3C2410_LOWLEVEL_UART_PORT=0 +CONFIG_S3C_LOWLEVEL_UART_PORT=0 CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set CONFIG_MACH_SMDK=y diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index 6c206ab3a1d5..88d797099bf0 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -93,8 +93,8 @@ config S3C2410_PM_CHECK_CHUNKSIZE See -config S3C2410_LOWLEVEL_UART_PORT - int "S3C2410 UART to use for low-level messages" +config S3C_LOWLEVEL_UART_PORT + int "S3C UART to use for low-level messages" depends on PLAT_S3C default 0 help diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h index 295c89c8ff2c..d78f3dca7d7e 100644 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -32,7 +32,7 @@ typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) -#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT) +#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT) static __inline__ void uart_wr(unsigned int reg, unsigned int val) From 3ec20520ddfb654b1e60f51ff5e4769afde51b36 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:12:04 +0100 Subject: [PATCH 50/60] [ARM] 4514/1: S3C: Rename DEBUG_S3C2410_PORT and DEBUG_S3C_UART Rename DEBUG_S3C2410_PORT to DEBUG_S3C_PORT as well as DEBUG_S3C2410_UART to DEBUG_S3C_UART as part of the updates to moving to plat-s3c for S3C base support. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/Kconfig.debug | 16 ++++++++-------- arch/arm/configs/s3c2410_defconfig | 4 ++-- include/asm-arm/arch-s3c2410/debug-macro.S | 4 ++-- 3 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 7d067071dc6c..18101f5f5f24 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -82,20 +82,20 @@ config DEBUG_CLPS711X_UART2 output to the second serial port on these devices. Saying N will cause the debug messages to appear on the first serial port. -config DEBUG_S3C2410_PORT - depends on DEBUG_LL && ARCH_S3C2410 - bool "Kernel low-level debugging messages via S3C2410 UART" +config DEBUG_S3C_PORT + depends on DEBUG_LL && PLAT_S3C + bool "Kernel low-level debugging messages via S3C UART" help Say Y here if you want debug print routines to go to one of the - S3C2410 internal UARTs. The chosen UART must have been configured + S3C internal UARTs. The chosen UART must have been configured before it is used. -config DEBUG_S3C2410_UART - depends on ARCH_S3C2410 - int "S3C2410 UART to use for low-level debug" +config DEBUG_S3C_UART + depends on PLAT_S3C + int "S3C UART to use for low-level debug" default "0" help - Choice for UART for kernel low-level using S3C2410 UARTS, + Choice for UART for kernel low-level using S3C UARTS, should be between zero and two. The port must have been initialised by the boot-loader before use. diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 0bdbbe0997f9..ada89b6c3919 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1392,8 +1392,8 @@ CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C2410_PORT=y -CONFIG_DEBUG_S3C2410_UART=0 +CONFIG_DEBUG_S3C_PORT=y +CONFIG_DEBUG_S3C_UART=0 # # Security options diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S index 6fcef3383f8e..c37d3474179b 100644 --- a/include/asm-arm/arch-s3c2410/debug-macro.S +++ b/include/asm-arm/arch-s3c2410/debug-macro.S @@ -24,8 +24,8 @@ tst \rx, #1 ldreq \rx, = S3C24XX_PA_UART ldrne \rx, = S3C24XX_VA_UART -#if CONFIG_DEBUG_S3C2410_UART != 0 - add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART) +#if CONFIG_DEBUG_S3C_UART != 0 + add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) #endif .endm From a14a26aca610bbd09fb62fb9fd5dbf6b41321972 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:13:29 +0100 Subject: [PATCH 51/60] [ARM] 4515/1: S3C: Move uncompress code to plat-s3c Move the uncompress.h to plat-s3c Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/uncompress.h | 142 ++------------------ include/asm-arm/plat-s3c/uncompress.h | 155 ++++++++++++++++++++++ 2 files changed, 166 insertions(+), 131 deletions(-) create mode 100644 include/asm-arm/plat-s3c/uncompress.h diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h index d78f3dca7d7e..22328b70ba5d 100644 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -13,153 +13,33 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H -typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ - -/* defines for UART registers */ -#include "asm/plat-s3c/regs-serial.h" -#include "asm/arch/regs-gpio.h" -#include "asm/plat-s3c/regs-watchdog.h" - +#include #include /* working in physical space... */ #undef S3C2410_GPIOREG -#undef S3C2410_WDOGREG - #define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x))) -#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x))) + +#include /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) -#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT) - -static __inline__ void -uart_wr(unsigned int reg, unsigned int val) +static void arch_detect_cpu(void) { - volatile unsigned int *ptr; + unsigned int cpuid; - ptr = (volatile unsigned int *)(reg + uart_base); - *ptr = val; -} - -static __inline__ unsigned int -uart_rd(unsigned int reg) -{ - volatile unsigned int *ptr; - - ptr = (volatile unsigned int *)(reg + uart_base); - return *ptr; -} - - -/* we can deal with the case the UARTs are being run - * in FIFO mode, so that we don't hold up our execution - * waiting for tx to happen... -*/ - -static void putc(int ch) -{ - int cpuid = S3C2410_GSTATUS1_2410; - -#ifndef CONFIG_CPU_S3C2400 cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1); cpuid &= S3C2410_GSTATUS1_IDMASK; -#endif - - if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { - int level; - - while (1) { - level = uart_rd(S3C2410_UFSTAT); - - if (cpuid == S3C2410_GSTATUS1_2440 || - cpuid == S3C2410_GSTATUS1_2442) { - level &= S3C2440_UFSTAT_TXMASK; - level >>= S3C2440_UFSTAT_TXSHIFT; - } else { - level &= S3C2410_UFSTAT_TXMASK; - level >>= S3C2410_UFSTAT_TXSHIFT; - } - - if (level < FIFO_MAX) - break; - } + if (cpuid == S3C2410_GSTATUS1_2440 || + cpuid == S3C2410_GSTATUS1_2442) { + fifo_mask = S3C2440_UFSTAT_TXMASK; + fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; } else { - /* not using fifos */ - - while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE) - barrier(); + fifo_mask = S3C2410_UFSTAT_TXMASK; + fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT; } - - /* write byte to transmission register */ - uart_wr(S3C2410_UTXH, ch); } -static inline void flush(void) -{ -} - -#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0) - -/* CONFIG_S3C2410_BOOT_WATCHDOG - * - * Simple boot-time watchdog setup, to reboot the system if there is - * any problem with the boot process -*/ - -#ifdef CONFIG_S3C2410_BOOT_WATCHDOG - -#define WDOG_COUNT (0xff00) - -static inline void arch_decomp_wdog(void) -{ - __raw_writel(WDOG_COUNT, S3C2410_WTCNT); -} - -static void arch_decomp_wdog_start(void) -{ - __raw_writel(WDOG_COUNT, S3C2410_WTDAT); - __raw_writel(WDOG_COUNT, S3C2410_WTCNT); - __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); -} - -#else -#define arch_decomp_wdog_start() -#define arch_decomp_wdog() -#endif - -#ifdef CONFIG_S3C2410_BOOT_ERROR_RESET - -static void arch_decomp_error(const char *x) -{ - putstr("\n\n"); - putstr(x); - putstr("\n\n -- System resetting\n"); - - __raw_writel(0x4000, S3C2410_WTDAT); - __raw_writel(0x4000, S3C2410_WTCNT); - __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); - - while(1); -} - -#define arch_error arch_decomp_error -#endif - -static void error(char *err); - -static void -arch_decomp_setup(void) -{ - /* we may need to setup the uart(s) here if we are not running - * on an BAST... the BAST will have left the uarts configured - * after calling linux. - */ - - arch_decomp_wdog_start(); -} - - #endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/include/asm-arm/plat-s3c/uncompress.h b/include/asm-arm/plat-s3c/uncompress.h new file mode 100644 index 000000000000..bc6817f91e2f --- /dev/null +++ b/include/asm-arm/plat-s3c/uncompress.h @@ -0,0 +1,155 @@ +/* linux/include/asm-arm/plat-s3c/uncompress.h + * + * Copyright 2003, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_UNCOMPRESS_H +#define __ASM_PLAT_UNCOMPRESS_H + +typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ + +/* uart setup */ + +static unsigned int fifo_mask; +static unsigned int fifo_max; + +/* forward declerations */ + +static void arch_detect_cpu(void); + +/* defines for UART registers */ + +#include "asm/plat-s3c/regs-serial.h" +#include "asm/plat-s3c/regs-watchdog.h" + +/* working in physical space... */ +#undef S3C2410_WDOGREG +#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x))) + +/* how many bytes we allow into the FIFO at a time in FIFO mode */ +#define FIFO_MAX (14) + +#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT) + +static __inline__ void +uart_wr(unsigned int reg, unsigned int val) +{ + volatile unsigned int *ptr; + + ptr = (volatile unsigned int *)(reg + uart_base); + *ptr = val; +} + +static __inline__ unsigned int +uart_rd(unsigned int reg) +{ + volatile unsigned int *ptr; + + ptr = (volatile unsigned int *)(reg + uart_base); + return *ptr; +} + +/* we can deal with the case the UARTs are being run + * in FIFO mode, so that we don't hold up our execution + * waiting for tx to happen... +*/ + +static void putc(int ch) +{ + if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { + int level; + + while (1) { + level = uart_rd(S3C2410_UFSTAT); + level &= fifo_mask; + + if (level < fifo_max) + break; + } + + } else { + /* not using fifos */ + + while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE) + barrier(); + } + + /* write byte to transmission register */ + uart_wr(S3C2410_UTXH, ch); +} + +static inline void flush(void) +{ +} + +#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0) + +/* CONFIG_S3C2410_BOOT_WATCHDOG + * + * Simple boot-time watchdog setup, to reboot the system if there is + * any problem with the boot process +*/ + +#ifdef CONFIG_S3C2410_BOOT_WATCHDOG + +#define WDOG_COUNT (0xff00) + +static inline void arch_decomp_wdog(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); +} + +static void arch_decomp_wdog_start(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTDAT); + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); +} + +#else +#define arch_decomp_wdog_start() +#define arch_decomp_wdog() +#endif + +#ifdef CONFIG_S3C2410_BOOT_ERROR_RESET + +static void arch_decomp_error(const char *x) +{ + putstr("\n\n"); + putstr(x); + putstr("\n\n -- System resetting\n"); + + __raw_writel(0x4000, S3C2410_WTDAT); + __raw_writel(0x4000, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); + + while(1); +} + +#define arch_error arch_decomp_error +#endif + +static void error(char *err); + +static void +arch_decomp_setup(void) +{ + /* we may need to setup the uart(s) here if we are not running + * on an BAST... the BAST will have left the uarts configured + * after calling linux. + */ + + arch_detect_cpu(); + arch_decomp_wdog_start(); +} + + +#endif /* __ASM_PLAT_UNCOMPRESS_H */ From 5c49218a15188cc036364c4cda325bae3cb138ae Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:14:02 +0100 Subject: [PATCH 52/60] [ARM] 4516/1: S3C: Fix uncompressor serial output for ARM926 Ensure we check for ARM926 in the uncompressor, as all current ARM926s do not have an ID register and all have S3C2440 style UARTs. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/uncompress.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h index 22328b70ba5d..7058382a6405 100644 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -25,6 +25,15 @@ /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) +static inline int is_arm926(void) +{ + unsigned int cpuid; + + asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid)); + + return ((cpuid & 0xff0) == 0x260); +} + static void arch_detect_cpu(void) { unsigned int cpuid; @@ -32,7 +41,7 @@ static void arch_detect_cpu(void) cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1); cpuid &= S3C2410_GSTATUS1_IDMASK; - if (cpuid == S3C2410_GSTATUS1_2440 || + if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 || cpuid == S3C2410_GSTATUS1_2442) { fifo_mask = S3C2440_UFSTAT_TXMASK; fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; From 1197b4cd5098fb862180f013a086a81507196a69 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:15:44 +0100 Subject: [PATCH 53/60] [ARM] 4517/1: S3C: Fix debug macros for ARM926 output Check for ARM926 based S3C24XX based devices as these only have 64 byte FIFOs, and do not have the model detection refisters in the same place as the ARM920 based CPUs Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/debug-macro.S | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S index c37d3474179b..9c8cd9abb82b 100644 --- a/include/asm-arm/arch-s3c2410/debug-macro.S +++ b/include/asm-arm/arch-s3c2410/debug-macro.S @@ -58,6 +58,12 @@ /* fifo level reading */ .macro fifo_level_s3c24xx rd, rx + @ check for arm920 vs arm926. currently assume all arm926 + @ devices have an 64 byte FIFO identical to the s3c2440 + mrc p15, 0, \rd, c0, c0 + and \rd, \rd, #0xff0 + teq \rd, #0x260 + beq 10000f mrc p15, 0, \rd, c1, c0 tst \rd, #1 addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) @@ -67,6 +73,7 @@ and \rd, \rd, #0x00ff0000 teq \rd, #0x00440000 @ is it 2440? +10000: ldr \rd, [ \rx, # S3C2410_UFSTAT ] andne \rd, \rd, #S3C2410_UFSTAT_TXMASK andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK From a45f82616eaa7e7fcd365ced78d3f0974b991800 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:16:51 +0100 Subject: [PATCH 54/60] [ARM] 4518/1: S3C: Rename watchdog configuration options Rename the S3C24XX configuration options for the watchdog boot controls for moving to the arch/arm/plat-s3c moves. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/configs/s3c2410_defconfig | 4 ++-- arch/arm/plat-s3c/Kconfig | 8 ++++---- include/asm-arm/plat-s3c/uncompress.h | 6 +++--- 3 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index ada89b6c3919..f8a1645b3d4a 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -138,8 +138,8 @@ CONFIG_ARCH_S3C2410=y CONFIG_PLAT_S3C24XX=y CONFIG_CPU_S3C244X=y CONFIG_PM_SIMTEC=y -# CONFIG_S3C2410_BOOT_WATCHDOG is not set -# CONFIG_S3C2410_BOOT_ERROR_RESET is not set +# CONFIG_S3C_BOOT_WATCHDOG is not set +# CONFIG_S3C_BOOT_ERROR_RESET is not set # CONFIG_S3C2410_PM_DEBUG is not set # CONFIG_S3C2410_PM_CHECK is not set CONFIG_S3C_LOWLEVEL_UART_PORT=0 diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index 88d797099bf0..31656c33e05e 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -42,16 +42,16 @@ config CPU_LLSERIAL_S3C2440 comment "Boot options" -config S3C2410_BOOT_WATCHDOG - bool "S3C2410 Initialisation watchdog" +config S3C_BOOT_WATCHDOG + bool "S3C Initialisation watchdog" depends on PLAT_S3C && S3C2410_WATCHDOG help Say y to enable the watchdog during the kernel decompression stage. If the kernel fails to uncompress, then the watchdog will trigger a reset and the system should restart. -config S3C2410_BOOT_ERROR_RESET - bool "S3C2410 Reboot on decompression error" +config S3C_BOOT_ERROR_RESET + bool "S3C Reboot on decompression error" depends on PLAT_S3C help Say y here to use the watchdog to reset the system if the diff --git a/include/asm-arm/plat-s3c/uncompress.h b/include/asm-arm/plat-s3c/uncompress.h index bc6817f91e2f..b5e6208175d1 100644 --- a/include/asm-arm/plat-s3c/uncompress.h +++ b/include/asm-arm/plat-s3c/uncompress.h @@ -92,13 +92,13 @@ static inline void flush(void) #define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0) -/* CONFIG_S3C2410_BOOT_WATCHDOG +/* CONFIG_S3C_BOOT_WATCHDOG * * Simple boot-time watchdog setup, to reboot the system if there is * any problem with the boot process */ -#ifdef CONFIG_S3C2410_BOOT_WATCHDOG +#ifdef CONFIG_S3C_BOOT_WATCHDOG #define WDOG_COUNT (0xff00) @@ -119,7 +119,7 @@ static void arch_decomp_wdog_start(void) #define arch_decomp_wdog() #endif -#ifdef CONFIG_S3C2410_BOOT_ERROR_RESET +#ifdef CONFIG_S3C_BOOT_ERROR_RESET static void arch_decomp_error(const char *x) { From ae39ae0b0030d7f96a6b7b06d9c77c8ad2a07673 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:18:22 +0100 Subject: [PATCH 55/60] [ARM] 4519/1: S3C: split S3C2400 values out of S3C24XX map.h Move the S3C2400 values to their own include directory series in include/asm-arm/arch-s3c2400 as the support for the S3C2400 is best placed in its own arch directory. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2400/map.h | 66 ++++++++++++++++++++++++++++++ include/asm-arm/arch-s3c2410/map.h | 51 ----------------------- 2 files changed, 66 insertions(+), 51 deletions(-) create mode 100644 include/asm-arm/arch-s3c2400/map.h diff --git a/include/asm-arm/arch-s3c2400/map.h b/include/asm-arm/arch-s3c2400/map.h new file mode 100644 index 000000000000..1184d907b31e --- /dev/null +++ b/include/asm-arm/arch-s3c2400/map.h @@ -0,0 +1,66 @@ +/* linux/include/asm-arm/arch-s3c2400/map.h + * + * Copyright 2003,2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * Copyright 2003, Lucas Correia Villa Real + * + * S3C2400 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C2400_PA_MEMCTRL (0x14000000) +#define S3C2400_PA_USBHOST (0x14200000) +#define S3C2400_PA_IRQ (0x14400000) +#define S3C2400_PA_DMA (0x14600000) +#define S3C2400_PA_CLKPWR (0x14800000) +#define S3C2400_PA_LCD (0x14A00000) +#define S3C2400_PA_UART (0x15000000) +#define S3C2400_PA_TIMER (0x15100000) +#define S3C2400_PA_USBDEV (0x15200140) +#define S3C2400_PA_WATCHDOG (0x15300000) +#define S3C2400_PA_IIC (0x15400000) +#define S3C2400_PA_IIS (0x15508000) +#define S3C2400_PA_GPIO (0x15600000) +#define S3C2400_PA_RTC (0x15700040) +#define S3C2400_PA_ADC (0x15800000) +#define S3C2400_PA_SPI (0x15900000) + +#define S3C2400_PA_MMC (0x15A00000) +#define S3C2400_SZ_MMC SZ_1M + +/* physical addresses of all the chip-select areas */ + +#define S3C2400_CS0 (0x00000000) +#define S3C2400_CS1 (0x02000000) +#define S3C2400_CS2 (0x04000000) +#define S3C2400_CS3 (0x06000000) +#define S3C2400_CS4 (0x08000000) +#define S3C2400_CS5 (0x0A000000) +#define S3C2400_CS6 (0x0C000000) +#define S3C2400_CS7 (0x0E000000) + +#define S3C2400_SDRAM_PA (S3C2400_CS6) + +/* Use a single interface for common resources between S3C24XX cpus */ + +#define S3C24XX_PA_IRQ S3C2400_PA_IRQ +#define S3C24XX_PA_MEMCTRL S3C2400_PA_MEMCTRL +#define S3C24XX_PA_USBHOST S3C2400_PA_USBHOST +#define S3C24XX_PA_DMA S3C2400_PA_DMA +#define S3C24XX_PA_CLKPWR S3C2400_PA_CLKPWR +#define S3C24XX_PA_LCD S3C2400_PA_LCD +#define S3C24XX_PA_UART S3C2400_PA_UART +#define S3C24XX_PA_TIMER S3C2400_PA_TIMER +#define S3C24XX_PA_USBDEV S3C2400_PA_USBDEV +#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG +#define S3C24XX_PA_IIC S3C2400_PA_IIC +#define S3C24XX_PA_IIS S3C2400_PA_IIS +#define S3C24XX_PA_GPIO S3C2400_PA_GPIO +#define S3C24XX_PA_RTC S3C2400_PA_RTC +#define S3C24XX_PA_ADC S3C2400_PA_ADC +#define S3C24XX_PA_SPI S3C2400_PA_SPI diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h index 19e77f038042..bec267b1d212 100644 --- a/include/asm-arm/arch-s3c2410/map.h +++ b/include/asm-arm/arch-s3c2410/map.h @@ -30,41 +30,33 @@ #define S3C2410_ADDR(x) (0xF0000000 + (x)) #endif -#define S3C2400_ADDR(x) S3C2410_ADDR(x) - /* interrupt controller is the first thing we put in, to make * the assembly code for the irq detection easier */ #define S3C24XX_VA_IRQ S3C2410_ADDR(0x00000000) -#define S3C2400_PA_IRQ (0x14400000) #define S3C2410_PA_IRQ (0x4A000000) #define S3C24XX_SZ_IRQ SZ_1M /* memory controller registers */ #define S3C24XX_VA_MEMCTRL S3C2410_ADDR(0x00100000) -#define S3C2400_PA_MEMCTRL (0x14000000) #define S3C2410_PA_MEMCTRL (0x48000000) #define S3C24XX_SZ_MEMCTRL SZ_1M /* USB host controller */ -#define S3C2400_PA_USBHOST (0x14200000) #define S3C2410_PA_USBHOST (0x49000000) #define S3C24XX_SZ_USBHOST SZ_1M /* DMA controller */ -#define S3C2400_PA_DMA (0x14600000) #define S3C2410_PA_DMA (0x4B000000) #define S3C24XX_SZ_DMA SZ_1M /* Clock and Power management */ #define S3C24XX_VA_CLKPWR S3C2410_ADDR(0x00200000) -#define S3C2400_PA_CLKPWR (0x14800000) #define S3C2410_PA_CLKPWR (0x4C000000) #define S3C24XX_SZ_CLKPWR SZ_1M /* LCD controller */ #define S3C24XX_VA_LCD S3C2410_ADDR(0x00300000) -#define S3C2400_PA_LCD (0x14A00000) #define S3C2410_PA_LCD (0x4D000000) #define S3C24XX_SZ_LCD SZ_1M @@ -72,41 +64,31 @@ #define S3C2410_PA_NAND (0x4E000000) #define S3C24XX_SZ_NAND SZ_1M -/* MMC controller - available on the S3C2400 */ -#define S3C2400_PA_MMC (0x15A00000) -#define S3C2400_SZ_MMC SZ_1M - /* UARTs */ #define S3C24XX_VA_UART S3C2410_ADDR(0x00400000) -#define S3C2400_PA_UART (0x15000000) #define S3C2410_PA_UART (0x50000000) #define S3C24XX_SZ_UART SZ_1M /* Timers */ #define S3C24XX_VA_TIMER S3C2410_ADDR(0x00500000) -#define S3C2400_PA_TIMER (0x15100000) #define S3C2410_PA_TIMER (0x51000000) #define S3C24XX_SZ_TIMER SZ_1M /* USB Device port */ #define S3C24XX_VA_USBDEV S3C2410_ADDR(0x00600000) -#define S3C2400_PA_USBDEV (0x15200140) #define S3C2410_PA_USBDEV (0x52000000) #define S3C24XX_SZ_USBDEV SZ_1M /* Watchdog */ #define S3C24XX_VA_WATCHDOG S3C2410_ADDR(0x00700000) -#define S3C2400_PA_WATCHDOG (0x15300000) #define S3C2410_PA_WATCHDOG (0x53000000) #define S3C24XX_SZ_WATCHDOG SZ_1M /* IIC hardware controller */ -#define S3C2400_PA_IIC (0x15400000) #define S3C2410_PA_IIC (0x54000000) #define S3C24XX_SZ_IIC SZ_1M /* IIS controller */ -#define S3C2400_PA_IIS (0x15508000) #define S3C2410_PA_IIS (0x55000000) #define S3C24XX_SZ_IIS SZ_1M @@ -120,23 +102,19 @@ * by the base system. */ -#define S3C2400_PA_GPIO (0x15600000) #define S3C2410_PA_GPIO (0x56000000) #define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) #define S3C24XX_SZ_GPIO SZ_1M /* RTC */ -#define S3C2400_PA_RTC (0x15700040) #define S3C2410_PA_RTC (0x57000000) #define S3C24XX_SZ_RTC SZ_1M /* ADC */ -#define S3C2400_PA_ADC (0x15800000) #define S3C2410_PA_ADC (0x58000000) #define S3C24XX_SZ_ADC SZ_1M /* SPI */ -#define S3C2400_PA_SPI (0x15900000) #define S3C2410_PA_SPI (0x59000000) #define S3C24XX_SZ_SPI SZ_1M @@ -177,37 +155,9 @@ #define S3C2410_SDRAM_PA (S3C2410_CS6) -#define S3C2400_CS0 (0x00000000) -#define S3C2400_CS1 (0x02000000) -#define S3C2400_CS2 (0x04000000) -#define S3C2400_CS3 (0x06000000) -#define S3C2400_CS4 (0x08000000) -#define S3C2400_CS5 (0x0A000000) -#define S3C2400_CS6 (0x0C000000) -#define S3C2400_CS7 (0x0E000000) - -#define S3C2400_SDRAM_PA (S3C2400_CS6) /* Use a single interface for common resources between S3C24XX cpus */ -#ifdef CONFIG_CPU_S3C2400 -#define S3C24XX_PA_IRQ S3C2400_PA_IRQ -#define S3C24XX_PA_MEMCTRL S3C2400_PA_MEMCTRL -#define S3C24XX_PA_USBHOST S3C2400_PA_USBHOST -#define S3C24XX_PA_DMA S3C2400_PA_DMA -#define S3C24XX_PA_CLKPWR S3C2400_PA_CLKPWR -#define S3C24XX_PA_LCD S3C2400_PA_LCD -#define S3C24XX_PA_UART S3C2400_PA_UART -#define S3C24XX_PA_TIMER S3C2400_PA_TIMER -#define S3C24XX_PA_USBDEV S3C2400_PA_USBDEV -#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG -#define S3C24XX_PA_IIC S3C2400_PA_IIC -#define S3C24XX_PA_IIS S3C2400_PA_IIS -#define S3C24XX_PA_GPIO S3C2400_PA_GPIO -#define S3C24XX_PA_RTC S3C2400_PA_RTC -#define S3C24XX_PA_ADC S3C2400_PA_ADC -#define S3C24XX_PA_SPI S3C2400_PA_SPI -#else #define S3C24XX_PA_IRQ S3C2410_PA_IRQ #define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL #define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST @@ -224,7 +174,6 @@ #define S3C24XX_PA_RTC S3C2410_PA_RTC #define S3C24XX_PA_ADC S3C2410_PA_ADC #define S3C24XX_PA_SPI S3C2410_PA_SPI -#endif /* deal with the registers that move under the 2412/2413 */ From bf2a3a26d18679c94eca973cb8741e3c1ac53c43 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:20:04 +0100 Subject: [PATCH 56/60] [ARM] 4520/1: S3C: Remove old VA values from static map Remove the static maps for the LCD and USB devices. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2412/s3c2412.c | 1 - arch/arm/plat-s3c24xx/s3c244x.c | 1 - include/asm-arm/arch-s3c2410/map.h | 2 -- include/asm-arm/arch-s3c2410/regs-lcd.h | 2 +- 4 files changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 12995d859b2c..66f471a9d64a 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -63,7 +63,6 @@ static inline void s3c2412_init_gpio2(void) static struct map_desc s3c2412_iodesc[] __initdata = { IODESC_ENT(CLKPWR), - IODESC_ENT(LCD), IODESC_ENT(TIMER), IODESC_ENT(WATCHDOG), }; diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index 8b2d47f2e80e..3444b13afac5 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -47,7 +47,6 @@ static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), IODESC_ENT(TIMER), IODESC_ENT(WATCHDOG), - IODESC_ENT(LCD), }; /* uart initialisation */ diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h index bec267b1d212..95b9aee54733 100644 --- a/include/asm-arm/arch-s3c2410/map.h +++ b/include/asm-arm/arch-s3c2410/map.h @@ -56,7 +56,6 @@ #define S3C24XX_SZ_CLKPWR SZ_1M /* LCD controller */ -#define S3C24XX_VA_LCD S3C2410_ADDR(0x00300000) #define S3C2410_PA_LCD (0x4D000000) #define S3C24XX_SZ_LCD SZ_1M @@ -75,7 +74,6 @@ #define S3C24XX_SZ_TIMER SZ_1M /* USB Device port */ -#define S3C24XX_VA_USBDEV S3C2410_ADDR(0x00600000) #define S3C2410_PA_USBDEV (0x52000000) #define S3C24XX_SZ_USBDEV SZ_1M diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h index b7faeb04c0ff..76fe5f693426 100644 --- a/include/asm-arm/arch-s3c2410/regs-lcd.h +++ b/include/asm-arm/arch-s3c2410/regs-lcd.h @@ -12,7 +12,7 @@ #ifndef ___ASM_ARCH_REGS_LCD_H #define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $" -#define S3C2410_LCDREG(x) ((x) + S3C24XX_VA_LCD) +#define S3C2410_LCDREG(x) (x) /* LCD control registers */ #define S3C2410_LCDCON1 S3C2410_LCDREG(0x00) From 530ef3c2a92b3c6a9901ac7e04d1e6c0077a9f2d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:59:44 +0100 Subject: [PATCH 57/60] [ARM] 4521/2: S3C: Reorganise VA mapping headers Reorganise the definition of the virtual addresses used into a common header and update the users to rename S3C2410 items into a more common S3C defined macros. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/map.h | 32 ++++++------------- include/asm-arm/plat-s3c/map.h | 40 ++++++++++++++++++++++++ include/asm-arm/plat-s3c/regs-serial.h | 8 ++--- include/asm-arm/plat-s3c/regs-timer.h | 16 +++++----- include/asm-arm/plat-s3c/regs-watchdog.h | 8 ++--- 5 files changed, 65 insertions(+), 39 deletions(-) create mode 100644 include/asm-arm/plat-s3c/map.h diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h index 95b9aee54733..b33ed3b05ef5 100644 --- a/include/asm-arm/arch-s3c2410/map.h +++ b/include/asm-arm/arch-s3c2410/map.h @@ -13,32 +13,19 @@ #ifndef __ASM_ARCH_MAP_H #define __ASM_ARCH_MAP_H -/* we have a bit of a tight squeeze to fit all our registers from - * 0xF00000000 upwards, since we use all of the nGCS space in some - * capacity, and also need to fit the S3C2410 registers in as well... - * - * we try to ensure stuff like the IRQ registers are available for - * an single MOVS instruction (ie, only 8 bits of set data) - * - * Note, we are trying to remove some of these from the implementation - * as they are only useful to certain drivers... - */ +#include -#ifndef __ASSEMBLY__ -#define S3C2410_ADDR(x) ((void __iomem __force *)0xF0000000 + (x)) -#else -#define S3C2410_ADDR(x) (0xF0000000 + (x)) -#endif +#define S3C2410_ADDR(x) S3C_ADDR(x) /* interrupt controller is the first thing we put in, to make * the assembly code for the irq detection easier */ -#define S3C24XX_VA_IRQ S3C2410_ADDR(0x00000000) +#define S3C24XX_VA_IRQ S3C_VA_IRQ #define S3C2410_PA_IRQ (0x4A000000) #define S3C24XX_SZ_IRQ SZ_1M /* memory controller registers */ -#define S3C24XX_VA_MEMCTRL S3C2410_ADDR(0x00100000) +#define S3C24XX_VA_MEMCTRL S3C_VA_MEM #define S3C2410_PA_MEMCTRL (0x48000000) #define S3C24XX_SZ_MEMCTRL SZ_1M @@ -51,7 +38,7 @@ #define S3C24XX_SZ_DMA SZ_1M /* Clock and Power management */ -#define S3C24XX_VA_CLKPWR S3C2410_ADDR(0x00200000) +#define S3C24XX_VA_CLKPWR S3C_VA_SYS #define S3C2410_PA_CLKPWR (0x4C000000) #define S3C24XX_SZ_CLKPWR SZ_1M @@ -64,12 +51,12 @@ #define S3C24XX_SZ_NAND SZ_1M /* UARTs */ -#define S3C24XX_VA_UART S3C2410_ADDR(0x00400000) +#define S3C24XX_VA_UART S3C_VA_UART #define S3C2410_PA_UART (0x50000000) #define S3C24XX_SZ_UART SZ_1M /* Timers */ -#define S3C24XX_VA_TIMER S3C2410_ADDR(0x00500000) +#define S3C24XX_VA_TIMER S3C_VA_TIMER #define S3C2410_PA_TIMER (0x51000000) #define S3C24XX_SZ_TIMER SZ_1M @@ -78,7 +65,7 @@ #define S3C24XX_SZ_USBDEV SZ_1M /* Watchdog */ -#define S3C24XX_VA_WATCHDOG S3C2410_ADDR(0x00700000) +#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG #define S3C2410_PA_WATCHDOG (0x53000000) #define S3C24XX_SZ_WATCHDOG SZ_1M @@ -96,7 +83,7 @@ * it is the same distance apart from the UART in the * phsyical address space, as the initial mapping for the IO * is done as a 1:1 maping. This puts it (currently) at - * 0xF6800000, which is not in the way of any current mapping + * 0xFA800000, which is not in the way of any current mapping * by the base system. */ @@ -153,7 +140,6 @@ #define S3C2410_SDRAM_PA (S3C2410_CS6) - /* Use a single interface for common resources between S3C24XX cpus */ #define S3C24XX_PA_IRQ S3C2410_PA_IRQ diff --git a/include/asm-arm/plat-s3c/map.h b/include/asm-arm/plat-s3c/map.h new file mode 100644 index 000000000000..95a82b0e84a1 --- /dev/null +++ b/include/asm-arm/plat-s3c/map.h @@ -0,0 +1,40 @@ +/* linux/include/asm-arm/plat-s3c/map.h + * + * Copyright 2003, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C - Memory map definitions (virtual addresses) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_MAP_H +#define __ASM_PLAT_MAP_H __FILE__ + +/* Fit all our registers in at 0xF4000000 upwards, trying to use as + * little of the VA space as possible so vmalloc and friends have a + * better chance of getting memory. + * + * we try to ensure stuff like the IRQ registers are available for + * an single MOVS instruction (ie, only 8 bits of set data) + */ + +#define S3C_ADDR_BASE (0xF4000000) + +#ifndef __ASSEMBLY__ +#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x)) +#else +#define S3C_ADDR(x) (S3C_ADDR_BASE + (x)) +#endif + +#define S3C_VA_IRQ S3C_ADDR(0x000000000) /* irq controller(s) */ +#define S3C_VA_SYS S3C_ADDR(0x001000000) /* system control */ +#define S3C_VA_MEM S3C_ADDR(0x002000000) /* system control */ +#define S3C_VA_TIMER S3C_ADDR(0x003000000) /* timer block */ +#define S3C_VA_WATCHDOG S3C_ADDR(0x004000000) /* watchdog */ +#define S3C_VA_UART S3C_ADDR(0x010000000) /* UART */ + +#endif /* __ASM_PLAT_MAP_H */ diff --git a/include/asm-arm/plat-s3c/regs-serial.h b/include/asm-arm/plat-s3c/regs-serial.h index 8946702a87f5..923e114db663 100644 --- a/include/asm-arm/plat-s3c/regs-serial.h +++ b/include/asm-arm/plat-s3c/regs-serial.h @@ -32,10 +32,10 @@ #ifndef __ASM_ARM_REGS_SERIAL_H #define __ASM_ARM_REGS_SERIAL_H -#define S3C24XX_VA_UART0 (S3C24XX_VA_UART) -#define S3C24XX_VA_UART1 (S3C24XX_VA_UART + 0x4000 ) -#define S3C24XX_VA_UART2 (S3C24XX_VA_UART + 0x8000 ) -#define S3C24XX_VA_UART3 (S3C24XX_VA_UART + 0xC000 ) +#define S3C24XX_VA_UART0 (S3C_VA_UART) +#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) +#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) +#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) #define S3C2410_PA_UART0 (S3C24XX_PA_UART) #define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h index 6f8fe432fe3a..8b0d594397b1 100644 --- a/include/asm-arm/plat-s3c/regs-timer.h +++ b/include/asm-arm/plat-s3c/regs-timer.h @@ -14,12 +14,12 @@ #ifndef __ASM_ARCH_REGS_TIMER_H #define __ASM_ARCH_REGS_TIMER_H "$Id: timer.h,v 1.4 2003/05/06 19:30:50 ben Exp $" -#define S3C2410_TIMERREG(x) (S3C24XX_VA_TIMER + (x)) -#define S3C2410_TIMERREG2(tmr,reg) S3C2410_TIMERREG((reg)+0x0c+((tmr)*0x0c)) +#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x)) +#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c)) -#define S3C2410_TCFG0 S3C2410_TIMERREG(0x00) -#define S3C2410_TCFG1 S3C2410_TIMERREG(0x04) -#define S3C2410_TCON S3C2410_TIMERREG(0x08) +#define S3C2410_TCFG0 S3C_TIMERREG(0x00) +#define S3C2410_TCFG1 S3C_TIMERREG(0x04) +#define S3C2410_TCON S3C_TIMERREG(0x08) #define S3C2410_TCFG_PRESCALER0_MASK (255<<0) #define S3C2410_TCFG_PRESCALER1_MASK (255<<8) @@ -71,9 +71,9 @@ /* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */ -#define S3C2410_TCNTB(tmr) S3C2410_TIMERREG2(tmr, 0x00) -#define S3C2410_TCMPB(tmr) S3C2410_TIMERREG2(tmr, 0x04) -#define S3C2410_TCNTO(tmr) S3C2410_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08)) +#define S3C2410_TCNTB(tmr) S3C_TIMERREG2(tmr, 0x00) +#define S3C2410_TCMPB(tmr) S3C_TIMERREG2(tmr, 0x04) +#define S3C2410_TCNTO(tmr) S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08)) #define S3C2410_TCON_T4RELOAD (1<<22) #define S3C2410_TCON_T4MANUALUPD (1<<21) diff --git a/include/asm-arm/plat-s3c/regs-watchdog.h b/include/asm-arm/plat-s3c/regs-watchdog.h index a9c5d491bdb6..56c4193b7a46 100644 --- a/include/asm-arm/plat-s3c/regs-watchdog.h +++ b/include/asm-arm/plat-s3c/regs-watchdog.h @@ -14,11 +14,11 @@ #ifndef __ASM_ARCH_REGS_WATCHDOG_H #define __ASM_ARCH_REGS_WATCHDOG_H "$Id: watchdog.h,v 1.2 2003/04/29 13:31:09 ben Exp $" -#define S3C2410_WDOGREG(x) ((x) + S3C24XX_VA_WATCHDOG) +#define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG) -#define S3C2410_WTCON S3C2410_WDOGREG(0x00) -#define S3C2410_WTDAT S3C2410_WDOGREG(0x04) -#define S3C2410_WTCNT S3C2410_WDOGREG(0x08) +#define S3C2410_WTCON S3C_WDOGREG(0x00) +#define S3C2410_WTDAT S3C_WDOGREG(0x04) +#define S3C2410_WTCNT S3C_WDOGREG(0x08) /* the watchdog can either generate a reset pulse, or an * interrupt. From 0d685cad354b773fbb6a698e73097f8b5aa4a342 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:21:21 +0100 Subject: [PATCH 58/60] [ARM] 4522/1: S3C: split include/asm-arm/arch/memory.h Split the S3C2400 out of S3C2410 memory.h files ready for S3C2400 support to be added. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2400/memory.h | 23 +++++++++++++++++++++++ include/asm-arm/arch-s3c2410/memory.h | 13 ------------- 2 files changed, 23 insertions(+), 13 deletions(-) create mode 100644 include/asm-arm/arch-s3c2400/memory.h diff --git a/include/asm-arm/arch-s3c2400/memory.h b/include/asm-arm/arch-s3c2400/memory.h new file mode 100644 index 000000000000..fb0381dde704 --- /dev/null +++ b/include/asm-arm/arch-s3c2400/memory.h @@ -0,0 +1,23 @@ +/* linux/include/asm-arm/arch-s3c2400/memory.h + * from linux/include/asm-arm/arch-rpc/memory.h + * + * Copyright 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * Copyright (C) 1996,1997,1998 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x0C000000) + +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +#endif diff --git a/include/asm-arm/arch-s3c2410/memory.h b/include/asm-arm/arch-s3c2410/memory.h index 4be6a74c4303..533e2436e707 100644 --- a/include/asm-arm/arch-s3c2410/memory.h +++ b/include/asm-arm/arch-s3c2410/memory.h @@ -11,20 +11,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -/* - * DRAM starts at 0x30000000 for S3C2410/S3C2440 - * and at 0x0C000000 for S3C2400 - */ -#ifdef CONFIG_CPU_S3C2400 -#define PHYS_OFFSET UL(0x0C000000) -#else #define PHYS_OFFSET UL(0x30000000) -#endif - -/* - * These are exactly the same on the S3C2410 as the - * physical memory view. -*/ #define __virt_to_bus(x) __virt_to_phys(x) #define __bus_to_virt(x) __phys_to_virt(x) From dd1313a167a9d29c349b3244dffac274bb0bf486 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:22:06 +0100 Subject: [PATCH 59/60] [ARM] 4523/1: S3C: Remove FIFO_MAX from uncompression headers We've fixed up a number of faults with the uncompressors so remove the now unused FIFO_MAX as it is not needed. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/uncompress.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h index 7058382a6405..48a5731ee988 100644 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -1,6 +1,7 @@ /* linux/include/asm-arm/arch-s3c2410/uncompress.h * - * Copyright (c) 2003 Simtec Electronics + * Copyright (c) 2003, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ * Ben Dooks * * S3C2410 - uncompress code @@ -22,9 +23,6 @@ #include -/* how many bytes we allow into the FIFO at a time in FIFO mode */ -#define FIFO_MAX (14) - static inline int is_arm926(void) { unsigned int cpuid; From 06cfa556949ead5d3c00dc68108c443be8dd8d17 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:23:02 +0100 Subject: [PATCH 60/60] [ARM] 4524/1: S3C: Move register out of include/asm-arm/arch-s3c2410 Move register and other definitions out of the include/asm-arm/arch-s3c2410 into the the arch directories of include/asm-arm/plat-s3c24xx and include/asm-arm/plat-s3c. This move is in preperation of the merging of s3c2400 and s3c6400. The following git mv commands are needed before this patch can be applied: git mv include/asm-arm/arch-s3c2410/regs-ac97.h include/asm-arm/plat-s3c/regs-ac97.h git mv include/asm-arm/arch-s3c2410/regs-adc.h include/asm-arm/plat-s3c/regs-adc.h git mv include/asm-arm/arch-s3c2410/regs-iis.h include/asm-arm/plat-s3c24xx/regs-iis.h git mv include/asm-arm/arch-s3c2410/regs-spi.h include/asm-arm/plat-s3c24xx/regs-spi.h git mv include/asm-arm/arch-s3c2410/regs-udc.h include/asm-arm/plat-s3c24xx/regs-udc.h git mv include/asm-arm/arch-s3c2410/udc.h include/asm-arm/plat-s3c24xx/udc.h Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/dma.c | 6 +++--- arch/arm/mach-s3c2410/mach-h1940.c | 2 +- arch/arm/mach-s3c2410/mach-qt2410.c | 2 +- arch/arm/mach-s3c2412/dma.c | 6 +++--- arch/arm/mach-s3c2412/mach-smdk2413.c | 2 +- arch/arm/mach-s3c2412/s3c2412.c | 2 +- arch/arm/mach-s3c2440/dma.c | 6 +++--- arch/arm/mach-s3c2443/dma.c | 6 +++--- arch/arm/plat-s3c24xx/devs.c | 4 ++-- include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-ac97.h | 0 include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-adc.h | 0 include/asm-arm/{arch-s3c2410 => plat-s3c24xx}/regs-iis.h | 0 include/asm-arm/{arch-s3c2410 => plat-s3c24xx}/regs-spi.h | 0 include/asm-arm/{arch-s3c2410 => plat-s3c24xx}/regs-udc.h | 0 include/asm-arm/{arch-s3c2410 => plat-s3c24xx}/udc.h | 0 15 files changed, 18 insertions(+), 18 deletions(-) rename include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-ac97.h (100%) rename include/asm-arm/{arch-s3c2410 => plat-s3c}/regs-adc.h (100%) rename include/asm-arm/{arch-s3c2410 => plat-s3c24xx}/regs-iis.h (100%) rename include/asm-arm/{arch-s3c2410 => plat-s3c24xx}/regs-spi.h (100%) rename include/asm-arm/{arch-s3c2410 => plat-s3c24xx}/regs-udc.h (100%) rename include/asm-arm/{arch-s3c2410 => plat-s3c24xx}/udc.h (100%) diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 5620ca4d1083..80d83739ab9f 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -25,12 +25,12 @@ #include #include -#include +#include #include #include #include -#include -#include +#include +#include static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { [DMACH_XD0] = { diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 4102235e085b..9a172b4ad720 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -38,7 +38,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 6cb4a0d2cb4a..e670b1e1631b 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -52,7 +52,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 48413df88e20..4b9425c1bf72 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -26,12 +26,12 @@ #include #include -#include +#include #include #include #include -#include -#include +#include +#include #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index bbc609c3e622..b126a530daa6 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -37,7 +37,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 66f471a9d64a..e0ccb404623f 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -39,7 +39,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 13e4be3392be..f509f062e749 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -25,12 +25,12 @@ #include #include -#include +#include #include #include #include -#include -#include +#include +#include static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { [DMACH_XD0] = { diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index d8bb4345b48a..fc3ede82af8f 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -26,12 +26,12 @@ #include #include -#include +#include #include #include #include -#include -#include +#include +#include #define MAP(x) { \ [0] = (x) | DMA_CH_VALID, \ diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 9941508614e4..e546e933b3f7 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -29,11 +29,11 @@ #include #include -#include +#include #include #include -#include +#include /* Serial port registrations */ diff --git a/include/asm-arm/arch-s3c2410/regs-ac97.h b/include/asm-arm/plat-s3c/regs-ac97.h similarity index 100% rename from include/asm-arm/arch-s3c2410/regs-ac97.h rename to include/asm-arm/plat-s3c/regs-ac97.h diff --git a/include/asm-arm/arch-s3c2410/regs-adc.h b/include/asm-arm/plat-s3c/regs-adc.h similarity index 100% rename from include/asm-arm/arch-s3c2410/regs-adc.h rename to include/asm-arm/plat-s3c/regs-adc.h diff --git a/include/asm-arm/arch-s3c2410/regs-iis.h b/include/asm-arm/plat-s3c24xx/regs-iis.h similarity index 100% rename from include/asm-arm/arch-s3c2410/regs-iis.h rename to include/asm-arm/plat-s3c24xx/regs-iis.h diff --git a/include/asm-arm/arch-s3c2410/regs-spi.h b/include/asm-arm/plat-s3c24xx/regs-spi.h similarity index 100% rename from include/asm-arm/arch-s3c2410/regs-spi.h rename to include/asm-arm/plat-s3c24xx/regs-spi.h diff --git a/include/asm-arm/arch-s3c2410/regs-udc.h b/include/asm-arm/plat-s3c24xx/regs-udc.h similarity index 100% rename from include/asm-arm/arch-s3c2410/regs-udc.h rename to include/asm-arm/plat-s3c24xx/regs-udc.h diff --git a/include/asm-arm/arch-s3c2410/udc.h b/include/asm-arm/plat-s3c24xx/udc.h similarity index 100% rename from include/asm-arm/arch-s3c2410/udc.h rename to include/asm-arm/plat-s3c24xx/udc.h