diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index ba9975771503..ff3e5bec1c24 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -107,10 +107,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *); issue of SET FEATURES - XFER MODE, and prior to operation. - Called by ata_device_add() after ata_dev_identify() determines - a device is present. - - This entry may be specified as NULL in ata_port_operations. @@ -154,8 +150,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in Taskfile read/write -void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf); -void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf); @@ -164,36 +160,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); hardware registers / DMA buffers, to obtain the current set of taskfile register values. Most drivers for taskfile-based hardware (PIO or MMIO) use - ata_tf_load() and ata_tf_read() for these hooks. + ata_sff_tf_load() and ata_sff_tf_read() for these hooks. PIO data read/write -void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); +void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); All bmdma-style drivers must implement this hook. This is the low-level operation that actually copies the data bytes during a PIO data transfer. -Typically the driver -will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or -ata_mmio_data_xfer(). +Typically the driver will choose one of ata_sff_data_xfer_noirq(), +ata_sff_data_xfer(), or ata_sff_data_xfer32(). ATA command execute -void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf); causes an ATA command, previously loaded with ->tf_load(), to be initiated in hardware. - Most drivers for taskfile-based hardware use ata_exec_command() + Most drivers for taskfile-based hardware use ata_sff_exec_command() for this hook. @@ -218,8 +213,8 @@ command. Read specific ATA shadow registers -u8 (*check_status)(struct ata_port *ap); -u8 (*check_altstatus)(struct ata_port *ap); +u8 (*sff_check_status)(struct ata_port *ap); +u8 (*sff_check_altstatus)(struct ata_port *ap); @@ -227,20 +222,14 @@ u8 (*check_altstatus)(struct ata_port *ap); hardware. On some hardware, reading the Status register has the side effect of clearing the interrupt condition. Most drivers for taskfile-based hardware use - ata_check_status() for this hook. - - - Note that because this is called from ata_device_add(), at - least a dummy function that clears device interrupts must be - provided for all drivers, even if the controller doesn't - actually have a taskfile status register. + ata_sff_check_status() for this hook. Select ATA device on bus -void (*dev_select)(struct ata_port *ap, unsigned int device); +void (*sff_dev_select)(struct ata_port *ap, unsigned int device); @@ -251,9 +240,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device); Most drivers for taskfile-based hardware use - ata_std_dev_select() for this hook. Controllers which do not - support second drives on a port (such as SATA contollers) will - use ata_noop_dev_select(). + ata_sff_dev_select() for this hook. @@ -441,13 +428,13 @@ void (*irq_clear) (struct ata_port *); to struct ata_host_set. - Most legacy IDE drivers use ata_interrupt() for the + Most legacy IDE drivers use ata_sff_interrupt() for the irq_handler hook, which scans all ports in the host_set, determines which queued command was active (if any), and calls - ata_host_intr(ap,qc). + ata_sff_host_intr(ap,qc). - Most legacy IDE drivers use ata_bmdma_irq_clear() for the + Most legacy IDE drivers use ata_sff_irq_clear() for the irq_clear() hook, which simply clears the interrupt and error flags in the DMA status register. @@ -496,10 +483,6 @@ void (*host_stop) (struct ata_host_set *host_set); data from port at this time. - Many drivers use ata_port_stop() as this hook, which frees the - PRD table. - - ->host_stop() is called after all ->port_stop() calls have completed. The hook must finalize hardware shutdown, release DMA and other resources, etc. diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index ed511af0f79a..a5e381185de9 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -520,29 +520,6 @@ Who: Hans de Goede ---------------------------- -What: corgikbd, spitzkbd, tosakbd driver -When: 2.6.35 -Files: drivers/input/keyboard/{corgi,spitz,tosa}kbd.c -Why: We now have a generic GPIO based matrix keyboard driver that - are fully capable of handling all the keys on these devices. - The original drivers manipulate the GPIO registers directly - and so are difficult to maintain. -Who: Eric Miao - ----------------------------- - -What: corgi_ssp and corgi_ts driver -When: 2.6.35 -Files: arch/arm/mach-pxa/corgi_ssp.c, drivers/input/touchscreen/corgi_ts.c -Why: The corgi touchscreen is now deprecated in favour of the generic - ads7846.c driver. The noise reduction technique used in corgi_ts.c, - that's to wait till vsync before ADC sampling, is also integrated into - ads7846 driver now. Provided that the original driver is not generic - and is difficult to maintain, it will be removed later. -Who: Eric Miao - ----------------------------- - What: capifs When: February 2011 Files: drivers/isdn/capi/capifs.* @@ -589,3 +566,26 @@ Why: Useful in 2003, implementation is a hack. Generally invoked by accident today. Seen as doing more harm than good. Who: Len Brown + +---------------------------- + +What: video4linux /dev/vtx teletext API support +When: 2.6.35 +Files: drivers/media/video/saa5246a.c drivers/media/video/saa5249.c + include/linux/videotext.h +Why: The vtx device nodes have been superseded by vbi device nodes + for many years. No applications exist that use the vtx support. + Of the two i2c drivers that actually support this API the saa5249 + has been impossible to use for a year now and no known hardware + that supports this device exists. The saa5246a is theoretically + supported by the old mxb boards, but it never actually worked. + + In summary: there is no hardware that can use this API and there + are no applications actually implementing this API. + + The vtx support still reserves minors 192-223 and we would really + like to reuse those for upcoming new functionality. In the unlikely + event that new hardware appears that wants to use the functionality + provided by the vtx API, then that functionality should be build + around the sliced VBI API instead. +Who: Hans Verkuil diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 3219ee0dbfef..5ebf5af1d716 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -74,6 +74,11 @@ structure at all. You should use this to keep device-specific data. /* retrieve the value */ void *i2c_get_clientdata(const struct i2c_client *client); +Note that starting with kernel 2.6.34, you don't have to set the `data' field +to NULL in remove() or if probe() failed anymore. The i2c-core does this +automatically on these occasions. Those are also the only times the core will +touch this field. + Accessing the client ==================== diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt index a10c3b6ba7c4..56941ae1f5db 100644 --- a/Documentation/input/elantech.txt +++ b/Documentation/input/elantech.txt @@ -333,14 +333,14 @@ byte 0: byte 1: bit 7 6 5 4 3 2 1 0 - x15 x14 x13 x12 x11 x10 x9 x8 + . . . . . x10 x9 x8 byte 2: bit 7 6 5 4 3 2 1 0 x7 x6 x5 x4 x4 x2 x1 x0 - x15..x0 = absolute x value (horizontal) + x10..x0 = absolute x value (horizontal) byte 3: @@ -350,14 +350,14 @@ byte 3: byte 4: bit 7 6 5 4 3 2 1 0 - y15 y14 y13 y12 y11 y10 y8 y8 + . . . . . . y9 y8 byte 5: bit 7 6 5 4 3 2 1 0 y7 y6 y5 y4 y3 y2 y1 y0 - y15..y0 = absolute y value (vertical) + y9..y0 = absolute y value (vertical) 4.2.2 Two finger touch diff --git a/MAINTAINERS b/MAINTAINERS index 27299d139478..5a2387d13339 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1000,6 +1000,20 @@ W: http://www.arm.linux.org.uk/ S: Maintained F: arch/arm/vfp/ +ARM/VOIPAC PXA270 SUPPORT +M: Marek Vasut +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-pxa/vpac270.c +F: arch/arm/mach-pxa/include/mach-pxa/vpac270.h + +ARM/ZIPIT Z2 SUPPORT +M: Marek Vasut +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-pxa/z2.c +F: arch/arm/mach-pxa/include/mach-pxa/z2.h + ASC7621 HARDWARE MONITOR DRIVER M: George Joseph L: lm-sensors@lm-sensors.org diff --git a/Makefile b/Makefile index 5f05f8cbeda4..701bc65b3952 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 34 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Sheep on Meth # *DOCUMENTATION* diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 6ab6b337a913..c5191b1532e8 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -685,8 +685,8 @@ proc_types: W(b) __armv4_mmu_cache_off W(b) __armv4_mmu_cache_flush - .word 0x56056930 - .word 0xff0ffff0 @ PXA935 + .word 0x56056900 + .word 0xffffff00 @ PXA9xx W(b) __armv4_mmu_cache_on W(b) __armv4_mmu_cache_off W(b) __armv4_mmu_cache_flush @@ -697,12 +697,6 @@ proc_types: W(b) __armv4_mmu_cache_off W(b) __armv5tej_mmu_cache_flush - .word 0x56056930 - .word 0xff0ffff0 @ PXA935 - W(b) __armv4_mmu_cache_on - W(b) __armv4_mmu_cache_off - W(b) __armv4_mmu_cache_flush - .word 0x56050000 @ Feroceon .word 0xff0f0000 W(b) __armv4_mmu_cache_on diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index 95d2becfc664..21f2bff8a363 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc8 -# Sat Feb 13 21:48:53 2010 +# Linux kernel version: 2.6.34-rc2 +# Thu Apr 8 14:49:08 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -19,6 +20,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 @@ -60,11 +62,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -97,10 +94,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y @@ -184,6 +185,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -193,7 +195,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -210,21 +211,26 @@ CONFIG_MMU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set # CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_U8500 is not set # # Intel PXA2xx/PXA3xx Implementations @@ -253,6 +259,7 @@ CONFIG_ARCH_PXA=y # CONFIG_MACH_EM_X270 is not set # CONFIG_MACH_EXEDA is not set # CONFIG_MACH_CM_X300 is not set +# CONFIG_MACH_CAPC7117 is not set # CONFIG_ARCH_GUMSTIX is not set CONFIG_MACH_INTELMOTE2=y # CONFIG_MACH_STARGATE2 is not set @@ -275,7 +282,11 @@ CONFIG_MACH_INTELMOTE2=y # CONFIG_PXA_EZX is not set # CONFIG_MACH_MP900C is not set # CONFIG_ARCH_PXA_PALM is not set +# CONFIG_MACH_RAUMFELD_RC is not set +# CONFIG_MACH_RAUMFELD_CONNECTOR is not set +# CONFIG_MACH_RAUMFELD_SPEAKER is not set # CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_ICONTROL is not set # CONFIG_ARCH_PXA_ESERIES is not set CONFIG_PXA27x=y CONFIG_PXA_SSP=y @@ -302,6 +313,7 @@ CONFIG_ARM_THUMB=y CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_IWMMXT=y CONFIG_XSCALE_PMU=y +CONFIG_CPU_HAS_PMU=y CONFIG_COMMON_CLKDEV=y # @@ -352,7 +364,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug" +CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y @@ -360,24 +372,8 @@ CONFIG_ATAGS_PROC=y # # CPU Power Management # -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -409,6 +405,7 @@ CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=y CONFIG_PM_RUNTIME=y +CONFIG_PM_OPS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -416,7 +413,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -506,6 +502,7 @@ CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_CT is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_LED=m @@ -622,6 +619,7 @@ CONFIG_IP6_NF_RAW=m # CONFIG_ATM is not set CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_BRIDGE_IGMP_SNOOPING is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set @@ -646,32 +644,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set -CONFIG_BT=y -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y -CONFIG_BT_RFCOMM=y -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=y -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=y - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIBTUSB=m -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_HCIUART=y -CONFIG_BT_HCIUART_H4=y -# CONFIG_BT_HCIUART_BCSP is not set -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIVHCI=m -CONFIG_BT_MRVL=m -CONFIG_BT_MRVL_SDIO=m -# CONFIG_BT_ATH3K is not set +# CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # CONFIG_WIRELESS is not set @@ -687,7 +660,8 @@ CONFIG_FIB_RULES=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_DEVTMPFS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -703,9 +677,9 @@ CONFIG_MTD=y # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y +CONFIG_MTD_AR7_PARTS=y # # User Modules And Translation Layers @@ -812,6 +786,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -965,6 +940,7 @@ CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -993,6 +969,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_PXA=y # CONFIG_I2C_PXA_SLAVE is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1006,15 +983,9 @@ CONFIG_I2C_PXA=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -1046,10 +1017,12 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -1093,10 +1066,12 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set @@ -1105,22 +1080,25 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6393XB is not set CONFIG_PMIC_DA903X=y # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set CONFIG_REGULATOR=y CONFIG_REGULATOR_DEBUG=y +# CONFIG_REGULATOR_DUMMY is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_USERSPACE_CONSUMER=y # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8649 is not set # CONFIG_REGULATOR_MAX8660 is not set CONFIG_REGULATOR_DA903X=y # CONFIG_REGULATOR_LP3971 is not set @@ -1218,6 +1196,7 @@ CONFIG_VIDEO_IR_I2C=y # CONFIG_VIDEO_SAA7191 is not set # CONFIG_VIDEO_TVP514X is not set # CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_TVP7002 is not set # CONFIG_VIDEO_VPX3220 is not set # @@ -1264,15 +1243,7 @@ CONFIG_SOC_CAMERA_MT9M111=y CONFIG_VIDEO_PXA27x=y # CONFIG_VIDEO_SH_MOBILE_CEU is not set # CONFIG_V4L_USB_DRIVERS is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_I2C_SI4713 is not set -# CONFIG_RADIO_SI4713 is not set -# CONFIG_USB_DSBR is not set -# CONFIG_RADIO_SI470X is not set -# CONFIG_USB_MR800 is not set -CONFIG_RADIO_TEA5764=y -CONFIG_RADIO_TEA5764_XTAL=y -# CONFIG_RADIO_TEF6862 is not set +# CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set # @@ -1398,8 +1369,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_APPLE=m -# CONFIG_HID_WACOM is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1477,7 +1446,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1489,7 +1457,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -1529,6 +1496,7 @@ CONFIG_USB_ETH=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set # CONFIG_USB_G_MULTI is not set # @@ -1555,8 +1523,6 @@ CONFIG_SDIO_UART=m # CONFIG_MMC_PXA=y # CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_AT91 is not set -# CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_SPI=y # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -1574,11 +1540,11 @@ CONFIG_LEDS_LP3944=y # CONFIG_LEDS_REGULATOR is not set # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_LT3593 is not set +CONFIG_LEDS_TRIGGERS=y # # LED Triggers # -CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_BACKLIGHT=y @@ -1656,7 +1622,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SA1100 is not set -# CONFIG_RTC_DRV_PXA is not set +CONFIG_RTC_DRV_PXA=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -1681,19 +1647,10 @@ CONFIG_EXT3_FS_XATTR=y CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=m -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_DEBUG is not set +# CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set @@ -1716,9 +1673,7 @@ CONFIG_CUSE=m # # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y +# CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # @@ -1750,12 +1705,14 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_FS_WBUF_VERIFY=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_LZO=y @@ -1765,6 +1722,7 @@ CONFIG_JFFS2_RUBIN=y CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set # CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=m CONFIG_SQUASHFS=m # CONFIG_SQUASHFS_EMBEDDED is not set @@ -1802,6 +1760,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CEPH_FS is not set CONFIG_CIFS=m CONFIG_CIFS_STATS=y # CONFIG_CIFS_STATS2 is not set @@ -1895,6 +1854,7 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y +# CONFIG_PROVE_RCU is not set CONFIG_LOCKDEP=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_LOCKDEP is not set @@ -1918,6 +1878,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -2061,9 +2022,9 @@ CONFIG_CRC32=y CONFIG_CRC7=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y @@ -2075,3 +2036,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig index 03f76cfc941c..4b55dcb60029 100644 --- a/arch/arm/configs/mmp2_defconfig +++ b/arch/arm/configs/mmp2_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc2 -# Tue Jan 5 13:55:22 2010 +# Linux kernel version: 2.6.34-rc5 +# Wed Apr 28 11:23:19 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,6 +19,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -32,6 +34,12 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -52,7 +60,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -85,10 +92,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y @@ -104,6 +115,7 @@ CONFIG_HAVE_CLK=y # # GCOV-based kernel profiling # +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -170,6 +182,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -179,7 +192,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -196,21 +208,26 @@ CONFIG_ARCH_MMP=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set # CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_U8500 is not set # CONFIG_MACH_TAVOREVB is not set # @@ -218,8 +235,10 @@ CONFIG_ARCH_MMP=y # # CONFIG_MACH_ASPENITE is not set # CONFIG_MACH_ZYLONITE2 is not set +# CONFIG_MACH_AVENGERS_LITE is not set # CONFIG_MACH_TTC_DKB is not set CONFIG_MACH_FLINT=y +CONFIG_MACH_MARVELL_JASPER=y CONFIG_CPU_MMP2=y CONFIG_PLAT_PXA=y @@ -246,7 +265,10 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_TAUROS2=y CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_COMMON_CLKDEV=y @@ -298,7 +320,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M user_debug=255" +CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -338,7 +360,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -532,6 +553,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -640,6 +662,7 @@ CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -667,6 +690,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_PXA=y # CONFIG_I2C_PXA_SLAVE is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -679,15 +703,9 @@ CONFIG_I2C_PXA=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -702,13 +720,16 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -737,10 +758,12 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # CONFIG_MFD_CORE=y +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set @@ -749,24 +772,27 @@ CONFIG_MFD_CORE=y # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +CONFIG_MFD_MAX8925=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -CONFIG_MFD_88PM8607=y CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_DUMMY is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set -CONFIG_REGULATOR_MAX8660=y +CONFIG_REGULATOR_MAX8649=y +# CONFIG_REGULATOR_MAX8660 is not set +CONFIG_REGULATOR_MAX8925=y # CONFIG_REGULATOR_LP3971 is not set # CONFIG_REGULATOR_TPS65023 is not set # CONFIG_REGULATOR_TPS6507X is not set -CONFIG_REGULATOR_88PM8607=y # CONFIG_MEDIA_SUPPORT is not set # @@ -781,6 +807,7 @@ CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_MAX8925=y # # Display device support @@ -821,6 +848,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_MAX8925=y # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set @@ -872,7 +900,6 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set -CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y @@ -883,7 +910,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set @@ -940,6 +967,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -967,6 +995,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -990,7 +1019,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -1032,6 +1061,7 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -1052,6 +1082,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_DYNAMIC_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1059,9 +1090,7 @@ CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_DEBUG_LL=y -# CONFIG_EARLY_PRINTK is not set -# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_LL is not set # CONFIG_OC_ETM is not set # diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index a2d307ec0420..244655d323ea 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -59,6 +59,13 @@ static unsigned long common_pin_config[] __initdata = { /* UART1 */ GPIO107_UART1_RXD, GPIO108_UART1_TXD, + + /* SSP1 */ + GPIO113_I2S_MCLK, + GPIO114_I2S_FRM, + GPIO115_I2S_BCLK, + GPIO116_I2S_RXD, + GPIO117_I2S_TXD, }; static struct smc91x_platdata smc91x_info = { @@ -123,12 +130,18 @@ static struct pxa3xx_nand_platform_data aspenite_nand_info = { .nr_parts = ARRAY_SIZE(aspenite_nand_partitions), }; +static struct i2c_board_info aspenite_i2c_info[] __initdata = { + { I2C_BOARD_INFO("wm8753", 0x1b), }, +}; + static void __init common_init(void) { mfp_config(ARRAY_AND_SIZE(common_pin_config)); /* on-chip devices */ pxa168_add_uart(1); + pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info)); + pxa168_add_ssp(1); pxa168_add_nand(&aspenite_nand_info); /* off-chip devices */ diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h index ab26d13295c4..ee8b02ed8011 100644 --- a/arch/arm/mach-mmp/include/mach/gpio.h +++ b/arch/arm/mach-mmp/include/mach/gpio.h @@ -10,7 +10,7 @@ #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) #define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x)))) -#define NR_BUILTIN_GPIO (128) +#define NR_BUILTIN_GPIO (192) #define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio)) diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h index 02701196ea03..b379cdec4d38 100644 --- a/arch/arm/mach-mmp/include/mach/irqs.h +++ b/arch/arm/mach-mmp/include/mach/irqs.h @@ -5,10 +5,10 @@ * Interrupt numbers for PXA168 */ #define IRQ_PXA168_NONE (-1) -#define IRQ_PXA168_SSP3 0 -#define IRQ_PXA168_SSP2 1 -#define IRQ_PXA168_SSP1 2 -#define IRQ_PXA168_SSP0 3 +#define IRQ_PXA168_SSP4 0 +#define IRQ_PXA168_SSP3 1 +#define IRQ_PXA168_SSP2 2 +#define IRQ_PXA168_SSP1 3 #define IRQ_PXA168_PMIC_INT 4 #define IRQ_PXA168_RTC_INT 5 #define IRQ_PXA168_RTC_ALARM 6 @@ -20,7 +20,7 @@ #define IRQ_PXA168_TIMER2 14 #define IRQ_PXA168_TIMER3 15 #define IRQ_PXA168_CMU 16 -#define IRQ_PXA168_SSP4 17 +#define IRQ_PXA168_SSP5 17 #define IRQ_PXA168_MSP_WAKEUP 19 #define IRQ_PXA168_CF_WAKEUP 20 #define IRQ_PXA168_XD_WAKEUP 21 diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h index 9f9f8143e272..761c2dacc079 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h @@ -9,6 +9,175 @@ #define MFP_DRIVE_FAST (0x8 << 13) /* GPIO */ +#define GPIO0_GPIO0 MFP_CFG(GPIO0, AF0) +#define GPIO1_GPIO1 MFP_CFG(GPIO1, AF0) +#define GPIO2_GPIO2 MFP_CFG(GPIO2, AF0) +#define GPIO3_GPIO3 MFP_CFG(GPIO3, AF0) +#define GPIO4_GPIO4 MFP_CFG(GPIO4, AF0) +#define GPIO5_GPIO5 MFP_CFG(GPIO5, AF0) +#define GPIO6_GPIO6 MFP_CFG(GPIO6, AF0) +#define GPIO7_GPIO7 MFP_CFG(GPIO7, AF0) +#define GPIO8_GPIO8 MFP_CFG(GPIO8, AF0) +#define GPIO9_GPIO9 MFP_CFG(GPIO9, AF0) +#define GPIO10_GPIO10 MFP_CFG(GPIO10, AF0) +#define GPIO11_GPIO11 MFP_CFG(GPIO11, AF0) +#define GPIO12_GPIO12 MFP_CFG(GPIO12, AF0) +#define GPIO13_GPIO13 MFP_CFG(GPIO13, AF0) +#define GPIO14_GPIO14 MFP_CFG(GPIO14, AF0) +#define GPIO15_GPIO15 MFP_CFG(GPIO15, AF0) +#define GPIO16_GPIO16 MFP_CFG(GPIO16, AF0) +#define GPIO17_GPIO17 MFP_CFG(GPIO17, AF0) +#define GPIO18_GPIO18 MFP_CFG(GPIO18, AF0) +#define GPIO19_GPIO19 MFP_CFG(GPIO19, AF0) +#define GPIO20_GPIO20 MFP_CFG(GPIO20, AF0) +#define GPIO21_GPIO21 MFP_CFG(GPIO21, AF0) +#define GPIO22_GPIO22 MFP_CFG(GPIO22, AF0) +#define GPIO23_GPIO23 MFP_CFG(GPIO23, AF0) +#define GPIO24_GPIO24 MFP_CFG(GPIO24, AF0) +#define GPIO25_GPIO25 MFP_CFG(GPIO25, AF0) +#define GPIO26_GPIO26 MFP_CFG(GPIO26, AF0) +#define GPIO27_GPIO27 MFP_CFG(GPIO27, AF0) +#define GPIO28_GPIO28 MFP_CFG(GPIO28, AF0) +#define GPIO29_GPIO29 MFP_CFG(GPIO29, AF0) +#define GPIO30_GPIO30 MFP_CFG(GPIO30, AF0) +#define GPIO31_GPIO31 MFP_CFG(GPIO31, AF0) +#define GPIO32_GPIO32 MFP_CFG(GPIO32, AF0) +#define GPIO33_GPIO33 MFP_CFG(GPIO33, AF0) +#define GPIO34_GPIO34 MFP_CFG(GPIO34, AF0) +#define GPIO35_GPIO35 MFP_CFG(GPIO35, AF0) +#define GPIO36_GPIO36 MFP_CFG(GPIO36, AF0) +#define GPIO37_GPIO37 MFP_CFG(GPIO37, AF0) +#define GPIO38_GPIO38 MFP_CFG(GPIO38, AF0) +#define GPIO39_GPIO39 MFP_CFG(GPIO39, AF0) +#define GPIO40_GPIO40 MFP_CFG(GPIO40, AF0) +#define GPIO41_GPIO41 MFP_CFG(GPIO41, AF0) +#define GPIO42_GPIO42 MFP_CFG(GPIO42, AF0) +#define GPIO43_GPIO43 MFP_CFG(GPIO43, AF0) +#define GPIO44_GPIO44 MFP_CFG(GPIO44, AF0) +#define GPIO45_GPIO45 MFP_CFG(GPIO45, AF0) +#define GPIO46_GPIO46 MFP_CFG(GPIO46, AF0) +#define GPIO47_GPIO47 MFP_CFG(GPIO47, AF0) +#define GPIO48_GPIO48 MFP_CFG(GPIO48, AF0) +#define GPIO49_GPIO49 MFP_CFG(GPIO49, AF0) +#define GPIO50_GPIO50 MFP_CFG(GPIO50, AF0) +#define GPIO51_GPIO51 MFP_CFG(GPIO51, AF0) +#define GPIO52_GPIO52 MFP_CFG(GPIO52, AF0) +#define GPIO53_GPIO53 MFP_CFG(GPIO53, AF0) +#define GPIO54_GPIO54 MFP_CFG(GPIO54, AF0) +#define GPIO55_GPIO55 MFP_CFG(GPIO55, AF0) +#define GPIO56_GPIO56 MFP_CFG(GPIO56, AF0) +#define GPIO57_GPIO57 MFP_CFG(GPIO57, AF0) +#define GPIO58_GPIO58 MFP_CFG(GPIO58, AF0) +#define GPIO59_GPIO59 MFP_CFG(GPIO59, AF0) +#define GPIO60_GPIO60 MFP_CFG(GPIO60, AF0) +#define GPIO61_GPIO61 MFP_CFG(GPIO61, AF0) +#define GPIO62_GPIO62 MFP_CFG(GPIO62, AF0) +#define GPIO63_GPIO63 MFP_CFG(GPIO63, AF0) +#define GPIO64_GPIO64 MFP_CFG(GPIO64, AF0) +#define GPIO65_GPIO65 MFP_CFG(GPIO65, AF0) +#define GPIO66_GPIO66 MFP_CFG(GPIO66, AF0) +#define GPIO67_GPIO67 MFP_CFG(GPIO67, AF0) +#define GPIO68_GPIO68 MFP_CFG(GPIO68, AF0) +#define GPIO69_GPIO69 MFP_CFG(GPIO69, AF0) +#define GPIO70_GPIO70 MFP_CFG(GPIO70, AF0) +#define GPIO71_GPIO71 MFP_CFG(GPIO71, AF0) +#define GPIO72_GPIO72 MFP_CFG(GPIO72, AF0) +#define GPIO73_GPIO73 MFP_CFG(GPIO73, AF0) +#define GPIO74_GPIO74 MFP_CFG(GPIO74, AF0) +#define GPIO75_GPIO75 MFP_CFG(GPIO75, AF0) +#define GPIO76_GPIO76 MFP_CFG(GPIO76, AF0) +#define GPIO77_GPIO77 MFP_CFG(GPIO77, AF0) +#define GPIO78_GPIO78 MFP_CFG(GPIO78, AF0) +#define GPIO79_GPIO79 MFP_CFG(GPIO79, AF0) +#define GPIO80_GPIO80 MFP_CFG(GPIO80, AF0) +#define GPIO81_GPIO81 MFP_CFG(GPIO81, AF0) +#define GPIO82_GPIO82 MFP_CFG(GPIO82, AF0) +#define GPIO83_GPIO83 MFP_CFG(GPIO83, AF0) +#define GPIO84_GPIO84 MFP_CFG(GPIO84, AF0) +#define GPIO85_GPIO85 MFP_CFG(GPIO85, AF0) +#define GPIO86_GPIO86 MFP_CFG(GPIO86, AF0) +#define GPIO87_GPIO87 MFP_CFG(GPIO87, AF0) +#define GPIO88_GPIO88 MFP_CFG(GPIO88, AF0) +#define GPIO89_GPIO89 MFP_CFG(GPIO89, AF0) +#define GPIO90_GPIO90 MFP_CFG(GPIO90, AF0) +#define GPIO91_GPIO91 MFP_CFG(GPIO91, AF0) +#define GPIO92_GPIO92 MFP_CFG(GPIO92, AF0) +#define GPIO93_GPIO93 MFP_CFG(GPIO93, AF0) +#define GPIO94_GPIO94 MFP_CFG(GPIO94, AF0) +#define GPIO95_GPIO95 MFP_CFG(GPIO95, AF0) +#define GPIO96_GPIO96 MFP_CFG(GPIO96, AF0) +#define GPIO97_GPIO97 MFP_CFG(GPIO97, AF0) +#define GPIO98_GPIO98 MFP_CFG(GPIO98, AF0) +#define GPIO99_GPIO99 MFP_CFG(GPIO99, AF0) +#define GPIO100_GPIO100 MFP_CFG(GPIO100, AF0) +#define GPIO101_GPIO101 MFP_CFG(GPIO101, AF0) +#define GPIO102_GPIO102 MFP_CFG(GPIO102, AF1) +#define GPIO103_GPIO103 MFP_CFG(GPIO103, AF1) +#define GPIO104_GPIO104 MFP_CFG(GPIO104, AF1) +#define GPIO105_GPIO105 MFP_CFG(GPIO105, AF1) +#define GPIO106_GPIO106 MFP_CFG(GPIO106, AF1) +#define GPIO107_GPIO107 MFP_CFG(GPIO107, AF1) +#define GPIO108_GPIO108 MFP_CFG(GPIO108, AF1) +#define GPIO109_GPIO109 MFP_CFG(GPIO109, AF1) +#define GPIO110_GPIO110 MFP_CFG(GPIO110, AF1) +#define GPIO111_GPIO111 MFP_CFG(GPIO111, AF1) +#define GPIO112_GPIO112 MFP_CFG(GPIO112, AF1) +#define GPIO113_GPIO113 MFP_CFG(GPIO113, AF1) +#define GPIO114_GPIO114 MFP_CFG(GPIO114, AF0) +#define GPIO115_GPIO115 MFP_CFG(GPIO115, AF0) +#define GPIO116_GPIO116 MFP_CFG(GPIO116, AF0) +#define GPIO117_GPIO117 MFP_CFG(GPIO117, AF0) +#define GPIO118_GPIO118 MFP_CFG(GPIO118, AF0) +#define GPIO119_GPIO119 MFP_CFG(GPIO119, AF0) +#define GPIO120_GPIO120 MFP_CFG(GPIO120, AF0) +#define GPIO121_GPIO121 MFP_CFG(GPIO121, AF0) +#define GPIO122_GPIO122 MFP_CFG(GPIO122, AF0) +#define GPIO123_GPIO123 MFP_CFG(GPIO123, AF0) +#define GPIO124_GPIO124 MFP_CFG(GPIO124, AF0) +#define GPIO125_GPIO125 MFP_CFG(GPIO125, AF0) +#define GPIO126_GPIO126 MFP_CFG(GPIO126, AF0) +#define GPIO127_GPIO127 MFP_CFG(GPIO127, AF0) +#define GPIO128_GPIO128 MFP_CFG(GPIO128, AF0) +#define GPIO129_GPIO129 MFP_CFG(GPIO129, AF0) +#define GPIO130_GPIO130 MFP_CFG(GPIO130, AF0) +#define GPIO131_GPIO131 MFP_CFG(GPIO131, AF0) +#define GPIO132_GPIO132 MFP_CFG(GPIO132, AF0) +#define GPIO133_GPIO133 MFP_CFG(GPIO133, AF0) +#define GPIO134_GPIO134 MFP_CFG(GPIO134, AF0) +#define GPIO135_GPIO135 MFP_CFG(GPIO135, AF0) +#define GPIO136_GPIO136 MFP_CFG(GPIO136, AF0) +#define GPIO137_GPIO137 MFP_CFG(GPIO137, AF0) +#define GPIO138_GPIO138 MFP_CFG(GPIO138, AF0) +#define GPIO139_GPIO139 MFP_CFG(GPIO139, AF0) +#define GPIO140_GPIO140 MFP_CFG(GPIO140, AF0) +#define GPIO141_GPIO141 MFP_CFG(GPIO141, AF0) +#define GPIO142_GPIO142 MFP_CFG(GPIO142, AF1) +#define GPIO143_GPIO143 MFP_CFG(GPIO143, AF1) +#define GPIO144_GPIO144 MFP_CFG(GPIO144, AF1) +#define GPIO145_GPIO145 MFP_CFG(GPIO145, AF1) +#define GPIO146_GPIO146 MFP_CFG(GPIO146, AF1) +#define GPIO147_GPIO147 MFP_CFG(GPIO147, AF1) +#define GPIO148_GPIO148 MFP_CFG(GPIO148, AF1) +#define GPIO149_GPIO149 MFP_CFG(GPIO149, AF1) +#define GPIO150_GPIO150 MFP_CFG(GPIO150, AF1) +#define GPIO151_GPIO151 MFP_CFG(GPIO151, AF1) +#define GPIO152_GPIO152 MFP_CFG(GPIO152, AF1) +#define GPIO153_GPIO153 MFP_CFG(GPIO153, AF1) +#define GPIO154_GPIO154 MFP_CFG(GPIO154, AF1) +#define GPIO155_GPIO155 MFP_CFG(GPIO155, AF1) +#define GPIO156_GPIO156 MFP_CFG(GPIO156, AF1) +#define GPIO157_GPIO157 MFP_CFG(GPIO157, AF1) +#define GPIO158_GPIO158 MFP_CFG(GPIO158, AF1) +#define GPIO159_GPIO159 MFP_CFG(GPIO159, AF1) +#define GPIO160_GPIO160 MFP_CFG(GPIO160, AF1) +#define GPIO161_GPIO161 MFP_CFG(GPIO161, AF1) +#define GPIO162_GPIO162 MFP_CFG(GPIO162, AF1) +#define GPIO163_GPIO163 MFP_CFG(GPIO163, AF1) +#define GPIO164_GPIO164 MFP_CFG(GPIO164, AF1) +#define GPIO165_GPIO165 MFP_CFG(GPIO165, AF1) +#define GPIO166_GPIO166 MFP_CFG(GPIO166, AF1) +#define GPIO167_GPIO167 MFP_CFG(GPIO167, AF1) +#define GPIO168_GPIO168 MFP_CFG(GPIO168, AF1) /* DFI */ #define GPIO108_DFI_D15 MFP_CFG(GPIO108, AF0) @@ -47,7 +216,6 @@ /* Ethernet */ #define GPIO155_SM_ADVMUX MFP_CFG(GPIO155, AF2) -#define GPIO155_GPIO155 MFP_CFG(GPIO155, AF1) /* UART1 */ #define GPIO45_UART1_RXD MFP_CFG(GPIO45, AF1) @@ -159,6 +327,8 @@ #define GPIO44_TWSI2_SDA MFP_CFG_DRV(GPIO44, AF1, SLOW) #define GPIO71_TWSI3_SCL MFP_CFG_DRV(GPIO71, AF1, SLOW) #define GPIO72_TWSI3_SDA MFP_CFG_DRV(GPIO72, AF1, SLOW) +#define TWSI4_SCL MFP_CFG_DRV(TWSI4_SCL, AF0, SLOW) +#define TWSI4_SDA MFP_CFG_DRV(TWSI4_SDA, AF0, SLOW) #define GPIO99_TWSI5_SCL MFP_CFG_DRV(GPIO99, AF4, SLOW) #define GPIO100_TWSI5_SDA MFP_CFG_DRV(GPIO100, AF4, SLOW) #define GPIO97_TWSI6_SCL MFP_CFG_DRV(GPIO97, AF2, SLOW) @@ -218,21 +388,6 @@ #define GPIO69_CAM_MCLK MFP_CFG_DRV(GPIO69, AF1, FAST) #define GPIO70_CAM_PCLK MFP_CFG_DRV(GPIO70, AF1, FAST) -/* Wifi */ -#define GPIO45_GPIO45 MFP_CFG(GPIO45, AF0) -#define GPIO46_GPIO46 MFP_CFG(GPIO46, AF0) -#define GPIO21_GPIO21 MFP_CFG(GPIO21, AF0) -#define GPIO22_GPIO22 MFP_CFG(GPIO22, AF0) -#define GPIO55_GPIO55 MFP_CFG(GPIO55, AF0) -#define GPIO56_GPIO56 MFP_CFG(GPIO56, AF0) -#define GPIO57_GPIO57 MFP_CFG(GPIO57, AF0) -#define GPIO58_GPIO58 MFP_CFG(GPIO58, AF0) - -/* Codec*/ -#define GPIO23_GPIO23 MFP_CFG(GPIO23, AF0) - -#define GPIO101_GPIO101 MFP_CFG(GPIO101, AF0) - /* PMIC */ #define PMIC_PMIC_INT MFP_CFG(PMIC_INT, AF0) diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h index 459f3be9cfb2..fec220bd5046 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -39,17 +39,17 @@ static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data, int ret; switch (id) { - case 0: d = &mmp2_device_twsi1; break; - case 1: d = &mmp2_device_twsi2; break; - case 2: d = &mmp2_device_twsi3; break; - case 3: d = &mmp2_device_twsi4; break; - case 4: d = &mmp2_device_twsi5; break; - case 5: d = &mmp2_device_twsi6; break; + case 1: d = &mmp2_device_twsi1; break; + case 2: d = &mmp2_device_twsi2; break; + case 3: d = &mmp2_device_twsi3; break; + case 4: d = &mmp2_device_twsi4; break; + case 5: d = &mmp2_device_twsi5; break; + case 6: d = &mmp2_device_twsi6; break; default: return -EINVAL; } - ret = i2c_register_board_info(id, info, size); + ret = i2c_register_board_info(id - 1, info, size); if (ret) return ret; diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 3ad612cbdf09..3b2bd5d5eb05 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -14,6 +14,11 @@ extern struct pxa_device_desc pxa168_device_pwm1; extern struct pxa_device_desc pxa168_device_pwm2; extern struct pxa_device_desc pxa168_device_pwm3; extern struct pxa_device_desc pxa168_device_pwm4; +extern struct pxa_device_desc pxa168_device_ssp1; +extern struct pxa_device_desc pxa168_device_ssp2; +extern struct pxa_device_desc pxa168_device_ssp3; +extern struct pxa_device_desc pxa168_device_ssp4; +extern struct pxa_device_desc pxa168_device_ssp5; extern struct pxa_device_desc pxa168_device_nand; static inline int pxa168_add_uart(int id) @@ -67,6 +72,22 @@ static inline int pxa168_add_pwm(int id) return pxa_register_device(d, NULL, 0); } +static inline int pxa168_add_ssp(int id) +{ + struct pxa_device_desc *d = NULL; + + switch (id) { + case 1: d = &pxa168_device_ssp1; break; + case 2: d = &pxa168_device_ssp2; break; + case 3: d = &pxa168_device_ssp3; break; + case 4: d = &pxa168_device_ssp4; break; + case 5: d = &pxa168_device_ssp5; break; + default: + return -EINVAL; + } + return pxa_register_device(d, NULL, 0); +} + static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info) { return pxa_register_device(&pxa168_device_nand, info, sizeof(*info)); diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h index 712af03fd1af..1a96585336ba 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apbc.h +++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h @@ -26,8 +26,6 @@ #define APBC_PXA168_PWM2 APBC_REG(0x010) #define APBC_PXA168_PWM3 APBC_REG(0x014) #define APBC_PXA168_PWM4 APBC_REG(0x018) -#define APBC_PXA168_SSP1 APBC_REG(0x01c) -#define APBC_PXA168_SSP2 APBC_REG(0x020) #define APBC_PXA168_RTC APBC_REG(0x028) #define APBC_PXA168_TWSI0 APBC_REG(0x02c) #define APBC_PXA168_KPC APBC_REG(0x030) @@ -35,14 +33,16 @@ #define APBC_PXA168_AIB APBC_REG(0x03c) #define APBC_PXA168_SW_JTAG APBC_REG(0x040) #define APBC_PXA168_ONEWIRE APBC_REG(0x048) -#define APBC_PXA168_SSP3 APBC_REG(0x04c) #define APBC_PXA168_ASFAR APBC_REG(0x050) #define APBC_PXA168_ASSAR APBC_REG(0x054) -#define APBC_PXA168_SSP4 APBC_REG(0x058) -#define APBC_PXA168_SSP5 APBC_REG(0x05c) #define APBC_PXA168_TWSI1 APBC_REG(0x06c) #define APBC_PXA168_UART3 APBC_REG(0x070) #define APBC_PXA168_AC97 APBC_REG(0x084) +#define APBC_PXA168_SSP1 APBC_REG(0x81c) +#define APBC_PXA168_SSP2 APBC_REG(0x820) +#define APBC_PXA168_SSP3 APBC_REG(0x84c) +#define APBC_PXA168_SSP4 APBC_REG(0x858) +#define APBC_PXA168_SSP5 APBC_REG(0x85c) /* * APB Clock register offsets for PXA910 diff --git a/arch/arm/mach-mmp/include/mach/regs-smc.h b/arch/arm/mach-mmp/include/mach/regs-smc.h new file mode 100644 index 000000000000..e484d40d71bd --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/regs-smc.h @@ -0,0 +1,37 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/regs-smc.h + * + * Static Memory Controller Registers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_REGS_SMC_H +#define __ASM_MACH_REGS_SMC_H + +#include + +#define SMC_VIRT_BASE (AXI_VIRT_BASE + 0x83800) +#define SMC_REG(x) (SMC_VIRT_BASE + (x)) + +#define SMC_MSC0 SMC_REG(0x0020) +#define SMC_MSC1 SMC_REG(0x0024) +#define SMC_SXCNFG0 SMC_REG(0x0030) +#define SMC_SXCNFG1 SMC_REG(0x0034) +#define SMC_MEMCLKCFG SMC_REG(0x0068) +#define SMC_CSDFICFG0 SMC_REG(0x0090) +#define SMC_CSDFICFG1 SMC_REG(0x0094) +#define SMC_CLK_RET_DEL SMC_REG(0x00b0) +#define SMC_ADV_RET_DEL SMC_REG(0x00b4) +#define SMC_CSADRMAP0 SMC_REG(0x00c0) +#define SMC_CSADRMAP1 SMC_REG(0x00c4) +#define SMC_WE_AP0 SMC_REG(0x00e0) +#define SMC_WE_AP1 SMC_REG(0x00e4) +#define SMC_OE_AP0 SMC_REG(0x00f0) +#define SMC_OE_AP1 SMC_REG(0x00f4) +#define SMC_ADV_AP0 SMC_REG(0x0100) +#define SMC_ADV_AP1 SMC_REG(0x0104) + +#endif /* __ASM_MACH_REGS_SMC_H */ diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h index 6cebbd0ca8f4..70c9f1d88c02 100644 --- a/arch/arm/mach-mmp/include/mach/timex.h +++ b/arch/arm/mach-mmp/include/mach/timex.h @@ -6,4 +6,8 @@ * published by the Free Software Foundation. */ +#ifdef CONFIG_CPU_MMP2 +#define CLOCK_TICK_RATE 6500000 +#else #define CLOCK_TICK_RATE 3250000 +#endif diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index cfd4d66ef800..d77dd41d60e1 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -15,12 +15,16 @@ #include #include #include +#include +#include +#include #include #include #include #include #include +#include #include "common.h" @@ -58,6 +62,63 @@ static unsigned long jasper_pin_config[] __initdata = { GPIO149_ND_CLE, GPIO112_ND_RDY0, GPIO160_ND_RDY1, + + /* PMIC */ + PMIC_PMIC_INT | MFP_LPM_EDGE_FALL, +}; + +static struct regulator_consumer_supply max8649_supply[] = { + REGULATOR_SUPPLY("vcc_core", NULL), +}; + +static struct regulator_init_data max8649_init_data = { + .constraints = { + .name = "vcc_core range", + .min_uV = 1150000, + .max_uV = 1280000, + .always_on = 1, + .boot_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8649_supply[0], +}; + +static struct max8649_platform_data jasper_max8649_info = { + .mode = 2, /* VID1 = 1, VID0 = 0 */ + .extclk = 0, + .ramp_timing = MAX8649_RAMP_32MV, + .regulator = &max8649_init_data, +}; + +static struct max8925_backlight_pdata jasper_backlight_data = { + .dual_string = 0, +}; + +static struct max8925_power_pdata jasper_power_data = { + .batt_detect = 0, /* can't detect battery by ID pin */ + .topoff_threshold = MAX8925_TOPOFF_THR_10PER, + .fast_charge = MAX8925_FCHG_1000MA, +}; + +static struct max8925_platform_data jasper_max8925_info = { + .backlight = &jasper_backlight_data, + .power = &jasper_power_data, + .irq_base = IRQ_BOARD_START, +}; + +static struct i2c_board_info jasper_twsi1_info[] = { + [0] = { + .type = "max8649", + .addr = 0x60, + .platform_data = &jasper_max8649_info, + }, + [1] = { + .type = "max8925", + .addr = 0x3c, + .irq = IRQ_MMP2_PMIC, + .platform_data = &jasper_max8925_info, + }, }; static void __init jasper_init(void) @@ -67,6 +128,9 @@ static void __init jasper_init(void) /* on-chip devices */ mmp2_add_uart(1); mmp2_add_uart(3); + mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info)); + + regulator_has_full_constraints(); } MACHINE_START(MARVELL_JASPER, "Jasper Development Platform") diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 72eb9daeea99..7f5eb059bb01 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -15,11 +15,14 @@ #include #include +#include + #include #include #include #include #include +#include #include #include #include @@ -32,7 +35,50 @@ #define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c) static struct mfp_addr_map mmp2_addr_map[] __initdata = { + + MFP_ADDR_X(GPIO0, GPIO58, 0x54), + MFP_ADDR_X(GPIO59, GPIO73, 0x280), + MFP_ADDR_X(GPIO74, GPIO101, 0x170), + + MFP_ADDR(GPIO102, 0x0), + MFP_ADDR(GPIO103, 0x4), + MFP_ADDR(GPIO104, 0x1fc), + MFP_ADDR(GPIO105, 0x1f8), + MFP_ADDR(GPIO106, 0x1f4), + MFP_ADDR(GPIO107, 0x1f0), + MFP_ADDR(GPIO108, 0x21c), + MFP_ADDR(GPIO109, 0x218), + MFP_ADDR(GPIO110, 0x214), + MFP_ADDR(GPIO111, 0x200), + MFP_ADDR(GPIO112, 0x244), + MFP_ADDR(GPIO113, 0x25c), + MFP_ADDR(GPIO114, 0x164), + MFP_ADDR_X(GPIO115, GPIO122, 0x260), + + MFP_ADDR(GPIO123, 0x148), + MFP_ADDR_X(GPIO124, GPIO141, 0xc), + + MFP_ADDR(GPIO142, 0x8), + MFP_ADDR_X(GPIO143, GPIO151, 0x220), + MFP_ADDR_X(GPIO152, GPIO153, 0x248), + MFP_ADDR_X(GPIO154, GPIO155, 0x254), + MFP_ADDR_X(GPIO156, GPIO159, 0x14c), + + MFP_ADDR(GPIO160, 0x250), + MFP_ADDR(GPIO161, 0x210), + MFP_ADDR(GPIO162, 0x20c), + MFP_ADDR(GPIO163, 0x208), + MFP_ADDR(GPIO164, 0x204), + MFP_ADDR(GPIO165, 0x1ec), + MFP_ADDR(GPIO166, 0x1e8), + MFP_ADDR(GPIO167, 0x1e4), + MFP_ADDR(GPIO168, 0x1e0), + + MFP_ADDR_X(TWSI1_SCL, TWSI1_SDA, 0x140), + MFP_ADDR_X(TWSI4_SCL, TWSI4_SDA, 0x2bc), + MFP_ADDR(PMIC_INT, 0x2c4), + MFP_ADDR(CLK_REQ, 0x160), MFP_ADDR_END, }; @@ -99,9 +145,13 @@ static struct clk_lookup mmp2_clkregs[] = { static int __init mmp2_init(void) { if (cpu_is_mmp2()) { +#ifdef CONFIG_CACHE_TAUROS2 + tauros2_init(); +#endif mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(mmp2_addr_map); - clks_register(ARRAY_AND_SIZE(mmp2_clkregs)); + pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16); + clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs)); } return 0; diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 1873c821df90..652ae660634c 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -72,6 +72,11 @@ static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000); static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000); static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000); static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000); +static APBC_CLK(ssp1, PXA168_SSP1, 4, 0); +static APBC_CLK(ssp2, PXA168_SSP2, 4, 0); +static APBC_CLK(ssp3, PXA168_SSP3, 4, 0); +static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); +static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); static APMU_CLK(nand, NAND, 0x01db, 208000000); @@ -85,6 +90,11 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL), INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL), INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL), + INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL), + INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL), + INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL), + INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL), + INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), }; @@ -132,3 +142,8 @@ PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10); PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10); PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10); PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99); +PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53); +PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55); +PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57); +PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59); +PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61); diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index 8f85f73b83a8..1ee6ce4087b8 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -16,6 +16,7 @@ #include #include +#include #include #include diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 5b6ee46fa7f6..3b51741a4810 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -19,7 +19,6 @@ config MACH_MAINSTONE config MACH_ZYLONITE bool select PXA3xx - select PXA_SSP select HAVE_PWM select PXA_HAVE_BOARD_IRQS @@ -39,7 +38,6 @@ config MACH_LITTLETON select PXA3xx select CPU_PXA300 select CPU_PXA310 - select PXA_SSP config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" @@ -98,7 +96,6 @@ config MACH_ARMCORE select PXA27x select IWMMXT select PXA25x - select PXA_SSP config MACH_EM_X270 bool "CompuLab EM-x270 platform" @@ -161,7 +158,6 @@ config MACH_XCEP select MTD_CFI select MTD_CHAR select SMC91X - select PXA_SSP help PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. Tuned for usage in Libera instruments for particle accelerators. @@ -180,7 +176,6 @@ config MACH_TRIZEPS4WL depends on TRIZEPS_PXA select TRIZEPS_PCMCIA select PXA27x - select PXA_SSP choice prompt "Select base board for Trizeps module" @@ -217,7 +212,6 @@ config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" select PXA27x select IWMMXT - select PXA_SSP select PXA_HAVE_BOARD_IRQS config MACH_PCM990_BASEBOARD @@ -255,13 +249,19 @@ config MACH_COLIBRI320 select PXA3xx select CPU_PXA320 +config MACH_VPAC270 + bool "Voipac PXA270" + select PXA27x + select HAVE_PATA_PLATFORM + help + PXA270 based Single Board Computer. + comment "End-user Products (sorted by vendor name)" config MACH_H4700 bool "HP iPAQ hx4700" select PXA27x select IWMMXT - select PXA_SSP select HAVE_PWM select PXA_HAVE_BOARD_IRQS @@ -277,7 +277,6 @@ config MACH_MAGICIAN bool "Enable HTC Magician Support" select PXA27x select IWMMXT - select PXA_SSP select HAVE_PWM select PXA_HAVE_BOARD_IRQS @@ -431,13 +430,11 @@ config MACH_RAUMFELD_CONNECTOR bool "Raumfeld Connector" select PXA3xx select CPU_PXA300 - select PXA_SSP config MACH_RAUMFELD_SPEAKER bool "Raumfeld Speaker" select PXA3xx select CPU_PXA300 - select PXA_SSP config PXA_SHARPSL bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" @@ -461,21 +458,11 @@ config SHARPSL_PM_MAX1111 select HWMON select SENSORS_MAX1111 -config CORGI_SSP_DEPRECATED - bool - select PXA_SSP - select PXA_SSP_LEGACY - help - This option will include corgi_ssp.c and corgi_lcd.c - that corgi_ts.c and other legacy drivers (corgi_bl.c - and sharpsl_pm.c) may depend on. - config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" depends on PXA_SHARPSL select PXA25x select SHARP_LOCOMO - select PXA_SSP select PXA_HAVE_BOARD_IRQS config MACH_CORGI @@ -581,6 +568,12 @@ config MACH_E800 Say Y here if you intend to run this kernel on a Toshiba e800 family PDA. +config MACH_ZIPIT2 + bool "Zipit Z2 Handheld" + select PXA27x + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS + endmenu config PXA25x @@ -645,28 +638,16 @@ config CPU_PXA950 config PXA_SHARP_C7xx bool - select PXA_SSP select SHARPSL_PM help Enable support for all Sharp C7xx models config PXA_SHARP_Cxx00 bool - select PXA_SSP select SHARPSL_PM help Enable common support for Sharp Cxx00 models -config PXA_SSP - tristate - help - Enable support for PXA2xx SSP ports - -config PXA_SSP_LEGACY - bool - help - Support of legacy SSP API - config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" depends on MACH_TOSA @@ -675,6 +656,18 @@ config TOSA_BT This is a simple driver that is able to control the state of built in bluetooth chip on tosa. +config TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on MACH_TOSA + default n + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + + config PXA_HAVE_BOARD_IRQS bool diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 86bc87b7f2dd..b8f1f4bc7ca7 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -14,7 +14,6 @@ obj-$(CONFIG_PXA3xx) += cpufreq-pxa3xx.o endif # Generic drivers that other drivers may depend upon -obj-$(CONFIG_PXA_SSP) += ssp.o # SoC-specific code obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o @@ -62,6 +61,7 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o +obj-$(CONFIG_MACH_VPAC270) += vpac270.o # End-user Products obj-$(CONFIG_MACH_H4700) += hx4700.o @@ -80,7 +80,6 @@ obj-$(CONFIG_MACH_PALMLD) += palmld.o obj-$(CONFIG_PALM_TREO) += palmtreo.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o -obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o @@ -94,6 +93,7 @@ obj-$(CONFIG_MACH_E800) += e800.o obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o +obj-$(CONFIG_MACH_ZIPIT2) += z2.o # Support for blinky lights led-y := leds.o diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index d37cfa132a65..fdda6be6c391 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -30,6 +30,9 @@ #include #include +#include +#include +#include #include #include @@ -430,7 +433,7 @@ static inline void cm_x300_init_nand(void) {} #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) static struct pxamci_platform_data cm_x300_mci_platform_data = { - .detect_delay = 20, + .detect_delay_ms = 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .gpio_card_detect = GPIO82_MMC_IRQ, .gpio_card_ro = GPIO85_MMC_WP, @@ -451,7 +454,7 @@ static void cm_x300_mci2_exit(struct device *dev, void *data) } static struct pxamci_platform_data cm_x300_mci2_platform_data = { - .detect_delay = 20, + .detect_delay_ms = 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .init = cm_x300_mci2_init, .exit = cm_x300_mci2_exit, @@ -584,12 +587,87 @@ static void __init cm_x300_init_rtc(void) static inline void cm_x300_init_rtc(void) {} #endif +/* Battery */ +struct power_supply_info cm_x300_psy_info = { + .name = "battery", + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + .voltage_max_design = 4200000, + .voltage_min_design = 3000000, + .use_for_apm = 1, +}; + +static void cm_x300_battery_low(void) +{ +#if defined(CONFIG_APM_EMULATION) + apm_queue_event(APM_LOW_BATTERY); +#endif +} + +static void cm_x300_battery_critical(void) +{ +#if defined(CONFIG_APM_EMULATION) + apm_queue_event(APM_CRITICAL_SUSPEND); +#endif +} + +struct da9030_battery_info cm_x300_battery_info = { + .battery_info = &cm_x300_psy_info, + + .charge_milliamp = 1000, + .charge_millivolt = 4200, + + .vbat_low = 3600, + .vbat_crit = 3400, + .vbat_charge_start = 4100, + .vbat_charge_stop = 4200, + .vbat_charge_restart = 4000, + + .vcharge_min = 3200, + .vcharge_max = 5500, + + .tbat_low = 197, + .tbat_high = 78, + .tbat_restart = 100, + + .batmon_interval = 0, + + .battery_low = cm_x300_battery_low, + .battery_critical = cm_x300_battery_critical, +}; + +static struct regulator_consumer_supply buck2_consumers[] = { + { + .dev = NULL, + .supply = "vcc_core", + }, +}; + +static struct regulator_init_data buck2_data = { + .constraints = { + .min_uV = 1375000, + .max_uV = 1375000, + .state_mem = { + .enabled = 0, + }, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .apply_uV = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(buck2_consumers), + .consumer_supplies = buck2_consumers, +}; + /* DA9030 */ struct da903x_subdev_info cm_x300_da9030_subdevs[] = { { - .name = "da903x-backlight", - .id = DA9030_ID_WLED, - } + .name = "da903x-battery", + .id = DA9030_ID_BAT, + .platform_data = &cm_x300_battery_info, + }, + { + .name = "da903x-regulator", + .id = DA9030_ID_BUCK2, + .platform_data = &buck2_data, + }, }; static struct da903x_platform_data cm_x300_da9030_info = { @@ -599,7 +677,7 @@ static struct da903x_platform_data cm_x300_da9030_info = { static struct i2c_board_info cm_x300_pmic_info = { I2C_BOARD_INFO("da9030", 0x49), - .irq = IRQ_GPIO(0), + .irq = IRQ_WAKEUP0, .platform_data = &cm_x300_da9030_info, }; @@ -689,13 +767,13 @@ static void __init cm_x300_init(void) static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags, char **cmdline, struct meminfo *mi) { - mi->nr_banks = 2; - mi->bank[0].start = 0xa0000000; - mi->bank[0].node = 0; - mi->bank[0].size = (64*1024*1024); - mi->bank[1].start = 0xc0000000; - mi->bank[1].node = 0; - mi->bank[1].size = (64*1024*1024); + /* Make sure that mi->bank[0].start = PHYS_ADDR */ + for (; tags->hdr.size; tags = tag_next(tags)) + if (tags->hdr.tag == ATAG_MEM && + tags->u.mem.start == 0x80000000) { + tags->u.mem.start = 0xa0000000; + break; + } } MACHINE_START(CM_X300, "CM-X300 module") diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index e6c0a2287eb8..199afa2ae303 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -96,7 +96,7 @@ static void colibri_pxa3xx_mci_exit(struct device *dev, void *data) } static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = { - .detect_delay = 20, + .detect_delay_ms = 200, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .init = colibri_pxa3xx_mci_init, .exit = colibri_pxa3xx_mci_exit, diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index da3156d8690b..3d1dcb9ac08f 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -106,18 +106,18 @@ static unsigned long corgi_pin_config[] __initdata = { GPIO8_MMC_CS0, /* GPIO Matrix Keypad */ - GPIO66_GPIO, /* column 0 */ - GPIO67_GPIO, /* column 1 */ - GPIO68_GPIO, /* column 2 */ - GPIO69_GPIO, /* column 3 */ - GPIO70_GPIO, /* column 4 */ - GPIO71_GPIO, /* column 5 */ - GPIO72_GPIO, /* column 6 */ - GPIO73_GPIO, /* column 7 */ - GPIO74_GPIO, /* column 8 */ - GPIO75_GPIO, /* column 9 */ - GPIO76_GPIO, /* column 10 */ - GPIO77_GPIO, /* column 11 */ + GPIO66_GPIO | MFP_LPM_DRIVE_HIGH, /* column 0 */ + GPIO67_GPIO | MFP_LPM_DRIVE_HIGH, /* column 1 */ + GPIO68_GPIO | MFP_LPM_DRIVE_HIGH, /* column 2 */ + GPIO69_GPIO | MFP_LPM_DRIVE_HIGH, /* column 3 */ + GPIO70_GPIO | MFP_LPM_DRIVE_HIGH, /* column 4 */ + GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* column 5 */ + GPIO72_GPIO | MFP_LPM_DRIVE_HIGH, /* column 6 */ + GPIO73_GPIO | MFP_LPM_DRIVE_HIGH, /* column 7 */ + GPIO74_GPIO | MFP_LPM_DRIVE_HIGH, /* column 8 */ + GPIO75_GPIO | MFP_LPM_DRIVE_HIGH, /* column 9 */ + GPIO76_GPIO | MFP_LPM_DRIVE_HIGH, /* column 10 */ + GPIO77_GPIO | MFP_LPM_DRIVE_HIGH, /* column 11 */ GPIO58_GPIO, /* row 0 */ GPIO59_GPIO, /* row 1 */ GPIO60_GPIO, /* row 2 */ @@ -128,13 +128,20 @@ static unsigned long corgi_pin_config[] __initdata = { GPIO65_GPIO, /* row 7 */ /* GPIO */ - GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */ - GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */ - GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */ - GPIO22_GPIO, /* CORGI_GPIO_IR_ON */ - GPIO44_GPIO, /* CORGI_GPIO_HSYNC */ + GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */ + GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */ + GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */ + GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_LED_ORANGE */ + GPIO21_GPIO, /* CORGI_GPIO_ADC_TEMP */ + GPIO22_GPIO, /* CORGI_GPIO_IR_ON */ + GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */ + GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_ON */ + GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_UKN */ + GPIO44_GPIO, /* CORGI_GPIO_HSYNC */ - GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, + GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_KEY_INT */ + GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* CORGI_GPIO_AC_IN */ + GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_WAKEUP */ }; /* @@ -437,6 +444,7 @@ static struct platform_device corgiled_device = { * to give the card a chance to fully insert/eject. */ static struct pxamci_platform_data corgi_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .gpio_card_detect = -1, .gpio_card_ro = CORGI_GPIO_nSD_WP, @@ -672,6 +680,15 @@ static void __init corgi_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config)); + /* allow wakeup from various GPIOs */ + gpio_set_wake(CORGI_GPIO_KEY_INT, 1); + gpio_set_wake(CORGI_GPIO_WAKEUP, 1); + gpio_set_wake(CORGI_GPIO_AC_IN, 1); + gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1); + + if (!machine_is_corgi()) + gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1); + pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); @@ -679,7 +696,6 @@ static void __init corgi_init(void) corgi_init_spi(); pxa_set_udc_info(&udc_info); - corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&corgi_mci_platform_data); pxa_set_ficp_info(&corgi_ficp_platform_data); pxa_set_i2c_info(NULL); diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c deleted file mode 100644 index d9b96319d498..000000000000 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ /dev/null @@ -1,288 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/corgi_lcd.c - * - * Corgi/Spitz LCD Specific Code - * - * Copyright (C) 2005 Richard Purdie - * - * Connectivity: - * Corgi - LCD to ATI Imageon w100 (Wallaby) - * Spitz - LCD to PXA Framebuffer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "generic.h" - -/* Register Addresses */ -#define RESCTL_ADRS 0x00 -#define PHACTRL_ADRS 0x01 -#define DUTYCTRL_ADRS 0x02 -#define POWERREG0_ADRS 0x03 -#define POWERREG1_ADRS 0x04 -#define GPOR3_ADRS 0x05 -#define PICTRL_ADRS 0x06 -#define POLCTRL_ADRS 0x07 - -/* Register Bit Definitions */ -#define RESCTL_QVGA 0x01 -#define RESCTL_VGA 0x00 - -#define POWER1_VW_ON 0x01 /* VW Supply FET ON */ -#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */ -#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */ - -#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */ -#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */ -#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */ - -#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */ -#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */ -#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */ -#define POWER0_COM_ON 0x08 /* COM Power Supply ON */ -#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */ - -#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */ -#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */ -#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */ - -#define PICTRL_INIT_STATE 0x01 -#define PICTRL_INIOFF 0x02 -#define PICTRL_POWER_DOWN 0x04 -#define PICTRL_COM_SIGNAL_OFF 0x08 -#define PICTRL_DAC_SIGNAL_OFF 0x10 - -#define POLCTRL_SYNC_POL_FALL 0x01 -#define POLCTRL_EN_POL_FALL 0x02 -#define POLCTRL_DATA_POL_FALL 0x04 -#define POLCTRL_SYNC_ACT_H 0x08 -#define POLCTRL_EN_ACT_L 0x10 - -#define POLCTRL_SYNC_POL_RISE 0x00 -#define POLCTRL_EN_POL_RISE 0x00 -#define POLCTRL_DATA_POL_RISE 0x00 -#define POLCTRL_SYNC_ACT_L 0x00 -#define POLCTRL_EN_ACT_H 0x00 - -#define PHACTRL_PHASE_MANUAL 0x01 -#define DEFAULT_PHAD_QVGA (9) -#define DEFAULT_COMADJ (125) - -/* - * This is only a psuedo I2C interface. We can't use the standard kernel - * routines as the interface is write only. We just assume the data is acked... - */ -static void lcdtg_ssp_i2c_send(u8 data) -{ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, data); - udelay(10); -} - -static void lcdtg_i2c_send_bit(u8 data) -{ - lcdtg_ssp_i2c_send(data); - lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(data); -} - -static void lcdtg_i2c_send_start(u8 base) -{ - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(base); -} - -static void lcdtg_i2c_send_stop(u8 base) -{ - lcdtg_ssp_i2c_send(base); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); -} - -static void lcdtg_i2c_send_byte(u8 base, u8 data) -{ - int i; - for (i = 0; i < 8; i++) { - if (data & 0x80) - lcdtg_i2c_send_bit(base | POWER0_COM_DOUT); - else - lcdtg_i2c_send_bit(base); - data <<= 1; - } -} - -static void lcdtg_i2c_wait_ack(u8 base) -{ - lcdtg_i2c_send_bit(base); -} - -static void lcdtg_set_common_voltage(u8 base_data, u8 data) -{ - /* Set Common Voltage to M62332FP via I2C */ - lcdtg_i2c_send_start(base_data); - lcdtg_i2c_send_byte(base_data, 0x9c); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_byte(base_data, 0x00); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_byte(base_data, data); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_stop(base_data); -} - -/* Set Phase Adjust */ -static void lcdtg_set_phadadj(int mode) -{ - int adj; - switch(mode) { - case 480: - case 640: - /* Setting for VGA */ - adj = sharpsl_param.phadadj; - if (adj < 0) { - adj = PHACTRL_PHASE_MANUAL; - } else { - adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL; - } - break; - case 240: - case 320: - default: - /* Setting for QVGA */ - adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL; - break; - } - - corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj); -} - -static int lcd_inited; - -void corgi_lcdtg_hw_init(int mode) -{ - if (!lcd_inited) { - int comadj; - - /* Initialize Internal Logic & Port */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE - | PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF); - - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF - | POWER0_COM_OFF | POWER0_VCC5_OFF); - - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); - - /* VDD(+8V), SVSS(-4V) ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); - mdelay(3); - - /* DAC ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON - | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* INIB = H, INI = L */ - /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF); - - /* Set Common Voltage */ - comadj = sharpsl_param.comadj; - if (comadj < 0) - comadj = DEFAULT_COMADJ; - lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj); - - /* VCC5 ON, DAC ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON | - POWER0_COM_OFF | POWER0_VCC5_ON); - - /* GVSS(-8V) ON, VDD ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); - mdelay(2); - - /* COM SIGNAL ON (PICTL[3] = L) */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE); - - /* COM ON, DAC ON, VCC5_ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON - | POWER0_COM_ON | POWER0_VCC5_ON); - - /* VW ON, GVSS ON, VDD ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON); - - /* Signals output enable */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, 0); - - /* Set Phase Adjust */ - lcdtg_set_phadadj(mode); - - /* Initialize for Input Signals from ATI */ - corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE - | POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H); - udelay(1000); - - lcd_inited=1; - } else { - lcdtg_set_phadadj(mode); - } - - switch(mode) { - case 480: - case 640: - /* Set Lcd Resolution (VGA) */ - corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA); - break; - case 240: - case 320: - default: - /* Set Lcd Resolution (QVGA) */ - corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA); - break; - } -} - -void corgi_lcdtg_suspend(void) -{ - /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */ - mdelay(34); - - /* (1)VW OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); - - /* (2)COM OFF */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF); - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON); - - /* (3)Set Common Voltage Bias 0V */ - lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0); - - /* (4)GVSS OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); - - /* (5)VCC5 OFF */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* (6)Set PDWN, INIOFF, DACOFF */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF | - PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF); - - /* (7)DAC OFF */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* (8)VDD OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); - - lcd_inited = 0; -} - diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index d4a0733e905b..3f1dc74ac048 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -25,7 +26,8 @@ #include #include #include -#include + +#include "generic.h" #include "sharpsl.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ @@ -35,87 +37,46 @@ #define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ #define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ +static struct gpio charger_gpios[] = { + { CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" }, + { CORGI_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" }, + { CORGI_GPIO_CHRG_UKN, GPIOF_OUT_INIT_LOW, "Charger Unknown" }, + { CORGI_GPIO_KEY_INT, GPIOF_IN, "Key Interrupt" }, +}; + static void corgi_charger_init(void) { - pxa_gpio_mode(CORGI_GPIO_ADC_TEMP_ON | GPIO_OUT); - pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT); - pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT); - pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN); + gpio_request_array(ARRAY_AND_SIZE(charger_gpios)); } static void corgi_measure_temp(int on) { - if (on) - GPSR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON); - else - GPCR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON); + gpio_set_value(CORGI_GPIO_ADC_TEMP_ON, on); } static void corgi_charge(int on) { if (on) { if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) { - GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); - GPSR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + gpio_set_value(CORGI_GPIO_CHRG_ON, 0); + gpio_set_value(CORGI_GPIO_CHRG_UKN, 1); } else { - GPSR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); - GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + gpio_set_value(CORGI_GPIO_CHRG_ON, 1); + gpio_set_value(CORGI_GPIO_CHRG_UKN, 0); } } else { - GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); - GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + gpio_set_value(CORGI_GPIO_CHRG_ON, 0); + gpio_set_value(CORGI_GPIO_CHRG_UKN, 0); } } static void corgi_discharge(int on) { - if (on) - GPSR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON); - else - GPCR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON); + gpio_set_value(CORGI_GPIO_DISCHARGE_ON, on); } static void corgi_presuspend(void) { - int i; - unsigned long wakeup_mask; - - /* charging , so CHARGE_ON bit is HIGH during OFF. */ - if (READ_GPIO_BIT(CORGI_GPIO_CHRG_ON)) - PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_ON); - else - PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_ON); - - if (READ_GPIO_BIT(CORGI_GPIO_LED_ORANGE)) - PGSR0 |= GPIO_bit(CORGI_GPIO_LED_ORANGE); - else - PGSR0 &= ~GPIO_bit(CORGI_GPIO_LED_ORANGE); - - if (READ_GPIO_BIT(CORGI_GPIO_CHRG_UKN)) - PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_UKN); - else - PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_UKN); - - /* Resume on keyboard power key */ - PGSR2 = (PGSR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(0); - - wakeup_mask = GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) | GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_CHRG_FULL); - - if (!machine_is_corgi()) - wakeup_mask |= GPIO_bit(CORGI_GPIO_MAIN_BAT_LOW); - - PWER = wakeup_mask | PWER_RTC; - PRER = wakeup_mask; - PFER = wakeup_mask; - - for (i = 0; i <=15; i++) { - if (PRER & PFER & GPIO_bit(i)) { - if (GPLR0 & GPIO_bit(i) ) - PRER &= ~GPIO_bit(i); - else - PFER &= ~GPIO_bit(i); - } - } } static void corgi_postsuspend(void) diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c deleted file mode 100644 index 9347254f8bcf..000000000000 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * SSP control code for Sharp Corgi devices - * - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include "sharpsl.h" - -static DEFINE_SPINLOCK(corgi_ssp_lock); -static struct ssp_dev corgi_ssp_dev; -static struct ssp_state corgi_ssp_state; -static struct corgissp_machinfo *ssp_machinfo; - -/* - * There are three devices connected to the SSP interface: - * 1. A touchscreen controller (TI ADS7846 compatible) - * 2. An LCD controller (with some Backlight functionality) - * 3. A battery monitoring IC (Maxim MAX1111) - * - * Each device uses a different speed/mode of communication. - * - * The touchscreen is very sensitive and the most frequently used - * so the port is left configured for this. - * - * Devices are selected using Chip Selects on GPIOs. - */ - -/* - * ADS7846 Routines - */ -unsigned long corgi_ssp_ads7846_putget(ulong data) -{ - unsigned long flag; - u32 ret = 0; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - if (ssp_machinfo->cs_ads7846 >= 0) - GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - - ssp_write_word(&corgi_ssp_dev,data); - ssp_read_word(&corgi_ssp_dev, &ret); - - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - return ret; -} - -/* - * NOTE: These functions should always be called in interrupt context - * and use the _lock and _unlock functions. They are very time sensitive. - */ -void corgi_ssp_ads7846_lock(void) -{ - spin_lock(&corgi_ssp_lock); - if (ssp_machinfo->cs_ads7846 >= 0) - GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); -} - -void corgi_ssp_ads7846_unlock(void) -{ - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - spin_unlock(&corgi_ssp_lock); -} - -void corgi_ssp_ads7846_put(ulong data) -{ - ssp_write_word(&corgi_ssp_dev,data); -} - -unsigned long corgi_ssp_ads7846_get(void) -{ - u32 ret = 0; - ssp_read_word(&corgi_ssp_dev, &ret); - return ret; -} - -EXPORT_SYMBOL(corgi_ssp_ads7846_putget); -EXPORT_SYMBOL(corgi_ssp_ads7846_lock); -EXPORT_SYMBOL(corgi_ssp_ads7846_unlock); -EXPORT_SYMBOL(corgi_ssp_ads7846_put); -EXPORT_SYMBOL(corgi_ssp_ads7846_get); - - -/* - * LCD/Backlight Routines - */ -unsigned long corgi_ssp_dac_put(ulong data) -{ - unsigned long flag, sscr1 = SSCR1_SPH; - u32 tmp; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - - if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi()) - sscr1 = 0; - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon)); - ssp_enable(&corgi_ssp_dev); - - if (ssp_machinfo->cs_lcdcon >= 0) - GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); - ssp_write_word(&corgi_ssp_dev,data); - /* Read null data back from device to prevent SSP overflow */ - ssp_read_word(&corgi_ssp_dev, &tmp); - if (ssp_machinfo->cs_lcdcon >= 0) - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - return 0; -} - -void corgi_ssp_lcdtg_send(u8 adrs, u8 data) -{ - corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f)); -} - -void corgi_ssp_blduty_set(int duty) -{ - corgi_ssp_lcdtg_send(0x02,duty); -} - -EXPORT_SYMBOL(corgi_ssp_lcdtg_send); -EXPORT_SYMBOL(corgi_ssp_blduty_set); - -/* - * Max1111 Routines - */ -int corgi_ssp_max1111_get(ulong data) -{ - unsigned long flag; - long voltage = 0, voltage1 = 0, voltage2 = 0; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - if (ssp_machinfo->cs_max1111 >= 0) - GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111)); - ssp_enable(&corgi_ssp_dev); - - udelay(1); - - /* TB1/RB1 */ - ssp_write_word(&corgi_ssp_dev,data); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */ - - /* TB12/RB2 */ - ssp_write_word(&corgi_ssp_dev,0); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); - - /* TB13/RB3*/ - ssp_write_word(&corgi_ssp_dev,0); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2); - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - if (ssp_machinfo->cs_max1111 >= 0) - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - if (voltage1 & 0xc0 || voltage2 & 0x3f) - voltage = -1; - else - voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03); - - return voltage; -} - -EXPORT_SYMBOL(corgi_ssp_max1111_get); - -/* - * Support Routines - */ - -void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo) -{ - ssp_machinfo = machinfo; -} - -static int __devinit corgi_ssp_probe(struct platform_device *dev) -{ - int ret; - - /* Chip Select - Disable All */ - if (ssp_machinfo->cs_lcdcon >= 0) - pxa_gpio_mode(ssp_machinfo->cs_lcdcon | GPIO_OUT | GPIO_DFLT_HIGH); - if (ssp_machinfo->cs_max1111 >= 0) - pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH); - if (ssp_machinfo->cs_ads7846 >= 0) - pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH); - - ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0); - - if (ret) - printk(KERN_ERR "Unable to register SSP handler!\n"); - else { - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - } - - return ret; -} - -static int corgi_ssp_remove(struct platform_device *dev) -{ - ssp_exit(&corgi_ssp_dev); - return 0; -} - -static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state) -{ - ssp_flush(&corgi_ssp_dev); - ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); - - return 0; -} - -static int corgi_ssp_resume(struct platform_device *dev) -{ - if (ssp_machinfo->cs_lcdcon >= 0) - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ - if (ssp_machinfo->cs_max1111 >= 0) - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ - ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); - ssp_enable(&corgi_ssp_dev); - - return 0; -} - -static struct platform_driver corgissp_driver = { - .probe = corgi_ssp_probe, - .remove = corgi_ssp_remove, - .suspend = corgi_ssp_suspend, - .resume = corgi_ssp_resume, - .driver = { - .name = "corgi-ssp", - }, -}; - -int __init corgi_ssp_init(void) -{ - return platform_driver_register(&corgissp_driver); -} - -arch_initcall(corgi_ssp_init); diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 88575b87bd33..91fd4fea6a54 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -125,18 +125,9 @@ static unsigned long csb726_pin_config[] = { GPIO118_I2C_SDA, }; -static struct pxamci_platform_data csb726_mci_data; - -static int csb726_mci_init(struct device *dev, - irq_handler_t detect, void *data) -{ - csb726_mci_data.detect_delay = msecs_to_jiffies(500); - return 0; -} - static struct pxamci_platform_data csb726_mci = { + .detect_delay_ms = 500, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = csb726_mci_init, /* FIXME setpower */ .gpio_card_detect = CSB726_GPIO_MMC_DETECT, .gpio_card_ro = CSB726_GPIO_MMC_RO, diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index aab04f33e49b..0517c17978f3 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -626,6 +626,7 @@ static int em_x270_mci_get_ro(struct device *dev) } static struct pxamci_platform_data em_x270_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23| MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27| MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30| @@ -643,7 +644,6 @@ static void __init em_x270_init_mmc(void) if (machine_is_em_x270()) em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro; - em_x270_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&em_x270_mci_platform_data); } #else diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 3126a35aa002..baabb3ce088e 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -28,7 +28,6 @@ #include #include -#include #include "generic.h" @@ -128,33 +127,3 @@ void __init pxa_map_io(void) iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); get_clk_frequency_khz(1); } - -/* - * Configure pins for GPIO or other functions - */ -int pxa_gpio_mode(int gpio_mode) -{ - unsigned long flags; - int gpio = gpio_mode & GPIO_MD_MASK_NR; - int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; - int gafr; - - if (gpio > pxa_last_gpio) - return -EINVAL; - - local_irq_save(flags); - if (gpio_mode & GPIO_DFLT_LOW) - GPCR(gpio) = GPIO_bit(gpio); - else if (gpio_mode & GPIO_DFLT_HIGH) - GPSR(gpio) = GPIO_bit(gpio); - if (gpio_mode & GPIO_MD_MASK_DIR) - GPDR(gpio) |= GPIO_bit(gpio); - else - GPDR(gpio) &= ~GPIO_bit(gpio); - gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2)); - GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); - local_irq_restore(flags); - - return 0; -} -EXPORT_SYMBOL(pxa_gpio_mode); diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 811743c56147..5f2ba8d9015c 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -2,6 +2,7 @@ #define _COLIBRI_H_ #include +#include /* * common settings for all modules diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index 7239281788de..585970ef08ce 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -113,7 +113,6 @@ * Shared data structures */ extern struct platform_device corgiscoop_device; -extern struct platform_device corgissp_device; #endif /* __ASM_ARCH_CORGI_H */ diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 7515757d6911..3d8d8cb09685 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -202,7 +202,7 @@ #define __cpu_is_pxa950(id) \ ({ \ unsigned int _id = (id) >> 4 & 0xfff; \ - id == 0x697; \ + _id == 0x697; \ }) #else #define __cpu_is_pxa950(id) (0) diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h index 658b28ed129b..c54cef25895c 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h @@ -25,6 +25,8 @@ #define MFP_DIR(x) (((x) >> 23) & 0x1) #define MFP_LPM_CAN_WAKEUP (0x1 << 24) +#define MFP_LPM_KEEP_OUTPUT (0x1 << 25) + #define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE) #define WAKEUP_ON_EDGE_FALL (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL) #define WAKEUP_ON_EDGE_BOTH (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH) diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h index 02a69dc2ee63..9eb515bb799d 100644 --- a/arch/arm/mach-pxa/include/mach/mmc.h +++ b/arch/arm/mach-pxa/include/mach/mmc.h @@ -9,7 +9,7 @@ struct mmc_host; struct pxamci_platform_data { unsigned int ocr_mask; /* available voltages */ - unsigned long detect_delay; /* delay in jiffies before detecting cards after interrupt */ + unsigned long detect_delay_ms; /* delay in millisecond before detecting cards after interrupt */ int (*init)(struct device *, irq_handler_t , void *); int (*get_ro)(struct device *); void (*setpower)(struct device *, unsigned int); diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h deleted file mode 100644 index 1209c44aa6f1..000000000000 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h +++ /dev/null @@ -1,375 +0,0 @@ -#ifndef __ASM_ARCH_PXA2XX_GPIO_H -#define __ASM_ARCH_PXA2XX_GPIO_H - -#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h - -#include - -/* GPIO alternate function assignments */ - -#define GPIO1_RST 1 /* reset */ -#define GPIO6_MMCCLK 6 /* MMC Clock */ -#define GPIO7_48MHz 7 /* 48 MHz clock output */ -#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ -#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ -#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ -#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ -#define GPIO12_32KHz 12 /* 32 kHz out */ -#define GPIO12_CIF_DD_7 12 /* Camera data pin 7 */ -#define GPIO13_MBGNT 13 /* memory controller grant */ -#define GPIO14_MBREQ 14 /* alternate bus master request */ -#define GPIO15_nCS_1 15 /* chip select 1 */ -#define GPIO16_PWM0 16 /* PWM0 output */ -#define GPIO17_PWM1 17 /* PWM1 output */ -#define GPIO17_CIF_DD_6 17 /* Camera data pin 6 */ -#define GPIO18_RDY 18 /* Ext. Bus Ready */ -#define GPIO19_DREQ1 19 /* External DMA Request */ -#define GPIO20_DREQ0 20 /* External DMA Request */ -#define GPIO23_SCLK 23 /* SSP clock */ -#define GPIO23_CIF_MCLK 23 /* Camera Master Clock */ -#define GPIO24_SFRM 24 /* SSP Frame */ -#define GPIO24_CIF_FV 24 /* Camera frame start signal */ -#define GPIO25_STXD 25 /* SSP transmit */ -#define GPIO25_CIF_LV 25 /* Camera line start signal */ -#define GPIO26_SRXD 26 /* SSP receive */ -#define GPIO26_CIF_PCLK 26 /* Camera Pixel Clock */ -#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ -#define GPIO27_CIF_DD_0 27 /* Camera data pin 0 */ -#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ -#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ -#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ -#define GPIO31_SYNC 31 /* AC97/I2S sync */ -#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ -#define GPIO32_SYSCLK 32 /* I2S System Clock */ -#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */ -#define GPIO33_nCS_5 33 /* chip select 5 */ -#define GPIO34_FFRXD 34 /* FFUART receive */ -#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ -#define GPIO35_FFCTS 35 /* FFUART Clear to send */ -#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ -#define GPIO37_FFDSR 37 /* FFUART data set ready */ -#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ -#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ -#define GPIO39_FFTXD 39 /* FFUART transmit data */ -#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ -#define GPIO41_FFRTS 41 /* FFUART request to send */ -#define GPIO42_BTRXD 42 /* BTUART receive data */ -#define GPIO42_HWRXD 42 /* HWUART receive data */ -#define GPIO42_CIF_MCLK 42 /* Camera Master Clock */ -#define GPIO43_BTTXD 43 /* BTUART transmit data */ -#define GPIO43_HWTXD 43 /* HWUART transmit data */ -#define GPIO43_CIF_FV 43 /* Camera frame start signal */ -#define GPIO44_BTCTS 44 /* BTUART clear to send */ -#define GPIO44_HWCTS 44 /* HWUART clear to send */ -#define GPIO44_CIF_LV 44 /* Camera line start signal */ -#define GPIO45_BTRTS 45 /* BTUART request to send */ -#define GPIO45_HWRTS 45 /* HWUART request to send */ -#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ -#define GPIO45_CIF_PCLK 45 /* Camera Pixel Clock */ -#define GPIO46_ICPRXD 46 /* ICP receive data */ -#define GPIO46_STRXD 46 /* STD_UART receive data */ -#define GPIO47_ICPTXD 47 /* ICP transmit data */ -#define GPIO47_STTXD 47 /* STD_UART transmit data */ -#define GPIO47_CIF_DD_0 47 /* Camera data pin 0 */ -#define GPIO48_nPOE 48 /* Output Enable for Card Space */ -#define GPIO48_CIF_DD_5 48 /* Camera data pin 5 */ -#define GPIO49_nPWE 49 /* Write Enable for Card Space */ -#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ -#define GPIO50_CIF_DD_3 50 /* Camera data pin 3 */ -#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ -#define GPIO51_CIF_DD_2 51 /* Camera data pin 2 */ -#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ -#define GPIO52_CIF_DD_4 52 /* Camera data pin 4 */ -#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ -#define GPIO53_MMCCLK 53 /* MMC Clock */ -#define GPIO53_CIF_MCLK 53 /* Camera Master Clock */ -#define GPIO54_MMCCLK 54 /* MMC Clock */ -#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ -#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27x) */ -#define GPIO54_CIF_PCLK 54 /* Camera Pixel Clock */ -#define GPIO55_nPREG 55 /* Card Address bit 26 */ -#define GPIO55_CIF_DD_1 55 /* Camera data pin 1 */ -#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ -#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ -#define GPIO58_LDD_0 58 /* LCD data pin 0 */ -#define GPIO59_LDD_1 59 /* LCD data pin 1 */ -#define GPIO60_LDD_2 60 /* LCD data pin 2 */ -#define GPIO61_LDD_3 61 /* LCD data pin 3 */ -#define GPIO62_LDD_4 62 /* LCD data pin 4 */ -#define GPIO63_LDD_5 63 /* LCD data pin 5 */ -#define GPIO64_LDD_6 64 /* LCD data pin 6 */ -#define GPIO65_LDD_7 65 /* LCD data pin 7 */ -#define GPIO66_LDD_8 66 /* LCD data pin 8 */ -#define GPIO66_MBREQ 66 /* alternate bus master req */ -#define GPIO67_LDD_9 67 /* LCD data pin 9 */ -#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ -#define GPIO68_LDD_10 68 /* LCD data pin 10 */ -#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ -#define GPIO69_LDD_11 69 /* LCD data pin 11 */ -#define GPIO69_MMCCLK 69 /* MMC_CLK */ -#define GPIO70_LDD_12 70 /* LCD data pin 12 */ -#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ -#define GPIO71_LDD_13 71 /* LCD data pin 13 */ -#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ -#define GPIO72_LDD_14 72 /* LCD data pin 14 */ -#define GPIO72_32kHz 72 /* 32 kHz clock */ -#define GPIO73_LDD_15 73 /* LCD data pin 15 */ -#define GPIO73_MBGNT 73 /* Memory controller grant */ -#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ -#define GPIO75_LCD_LCLK 75 /* LCD line clock */ -#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ -#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ -#define GPIO78_nCS_2 78 /* chip select 2 */ -#define GPIO79_nCS_3 79 /* chip select 3 */ -#define GPIO80_nCS_4 80 /* chip select 4 */ -#define GPIO81_NSCLK 81 /* NSSP clock */ -#define GPIO81_CIF_DD_0 81 /* Camera data pin 0 */ -#define GPIO82_NSFRM 82 /* NSSP Frame */ -#define GPIO82_CIF_DD_5 82 /* Camera data pin 5 */ -#define GPIO83_NSTXD 83 /* NSSP transmit */ -#define GPIO83_CIF_DD_4 83 /* Camera data pin 4 */ -#define GPIO84_NSRXD 84 /* NSSP receive */ -#define GPIO84_CIF_FV 84 /* Camera frame start signal */ -#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ -#define GPIO85_CIF_LV 85 /* Camera line start signal */ -#define GPIO90_CIF_DD_4 90 /* Camera data pin 4 */ -#define GPIO91_CIF_DD_5 91 /* Camera data pin 5 */ -#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ -#define GPIO93_CIF_DD_6 93 /* Camera data pin 6 */ -#define GPIO94_CIF_DD_5 94 /* Camera data pin 5 */ -#define GPIO95_CIF_DD_4 95 /* Camera data pin 4 */ -#define GPIO96_FFRXD 96 /* FFUART recieve */ -#define GPIO98_FFRTS 98 /* FFUART request to send */ -#define GPIO98_CIF_DD_0 98 /* Camera data pin 0 */ -#define GPIO99_FFTXD 99 /* FFUART transmit data */ -#define GPIO100_FFCTS 100 /* FFUART Clear to send */ -#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ -#define GPIO103_CIF_DD_3 103 /* Camera data pin 3 */ -#define GPIO104_CIF_DD_2 104 /* Camera data pin 2 */ -#define GPIO105_CIF_DD_1 105 /* Camera data pin 1 */ -#define GPIO106_CIF_DD_9 106 /* Camera data pin 9 */ -#define GPIO107_CIF_DD_8 107 /* Camera data pin 8 */ -#define GPIO108_CIF_DD_7 108 /* Camera data pin 7 */ -#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ -#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ -#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ -#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ -#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ -#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ -#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ -#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ -#define GPIO114_CIF_DD_1 114 /* Camera data pin 1 */ -#define GPIO115_CIF_DD_3 115 /* Camera data pin 3 */ -#define GPIO116_CIF_DD_2 116 /* Camera data pin 2 */ - -/* GPIO alternate function mode & direction */ - -#define GPIO_IN 0x000 -#define GPIO_OUT 0x080 -#define GPIO_ALT_FN_1_IN 0x100 -#define GPIO_ALT_FN_1_OUT 0x180 -#define GPIO_ALT_FN_2_IN 0x200 -#define GPIO_ALT_FN_2_OUT 0x280 -#define GPIO_ALT_FN_3_IN 0x300 -#define GPIO_ALT_FN_3_OUT 0x380 -#define GPIO_MD_MASK_NR 0x07f -#define GPIO_MD_MASK_DIR 0x080 -#define GPIO_MD_MASK_FN 0x300 -#define GPIO_DFLT_LOW 0x400 -#define GPIO_DFLT_HIGH 0x800 - -#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) -#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) -#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT) -#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) -#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) -#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) -#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) -#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) -#define GPIO12_CIF_DD_7_MD (12 | GPIO_ALT_FN_2_IN) -#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) -#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) -#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) -#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) -#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) -#define GPIO17_CIF_DD_6_MD (17 | GPIO_ALT_FN_2_IN) -#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) -#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) -#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) -#define GPIO23_CIF_MCLK_MD (23 | GPIO_ALT_FN_1_OUT) -#define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT) -#define GPIO24_CIF_FV_MD (24 | GPIO_ALT_FN_1_OUT) -#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) -#define GPIO25_CIF_LV_MD (25 | GPIO_ALT_FN_1_OUT) -#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) -#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) -#define GPIO26_CIF_PCLK_MD (26 | GPIO_ALT_FN_2_IN) -#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) -#define GPIO27_CIF_DD_0_MD (27 | GPIO_ALT_FN_3_IN) -#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) -#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN) -#define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT) -#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) -#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) -#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) -#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) -#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) -#define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT) -#define GPIO32_MMCCLK_MD (32 | GPIO_ALT_FN_2_OUT) -#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) -#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) -#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) -#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) -#define GPIO35_KP_MKOUT6_MD (35 | GPIO_ALT_FN_2_OUT) -#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) -#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) -#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) -#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) -#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) -#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) -#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) -#define GPIO41_KP_MKOUT7_MD (41 | GPIO_ALT_FN_1_OUT) -#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) -#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) -#define GPIO42_CIF_MCLK_MD (42 | GPIO_ALT_FN_3_OUT) -#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) -#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) -#define GPIO43_CIF_FV_MD (43 | GPIO_ALT_FN_3_OUT) -#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) -#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) -#define GPIO44_CIF_LV_MD (44 | GPIO_ALT_FN_3_OUT) -#define GPIO45_CIF_PCLK_MD (45 | GPIO_ALT_FN_3_IN) -#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) -#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) -#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) -#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) -#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) -#define GPIO47_CIF_DD_0_MD (47 | GPIO_ALT_FN_1_IN) -#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) -#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) -#define GPIO48_CIF_DD_5_MD (48 | GPIO_ALT_FN_1_IN) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) -#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) -#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) -#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) -#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) -#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) -#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) -#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) -#define GPIO52_CIF_DD_4_MD (52 | GPIO_ALT_FN_1_IN) -#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) -#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) -#define GPIO53_CIF_MCLK_MD (53 | GPIO_ALT_FN_2_OUT) -#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) -#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO54_CIF_PCLK_MD (54 | GPIO_ALT_FN_3_IN) -#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) -#define GPIO55_CIF_DD_1_MD (55 | GPIO_ALT_FN_1_IN) -#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) -#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) -#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) -#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) -#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) -#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) -#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) -#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) -#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) -#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) -#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) -#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) -#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) -#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) -#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) -#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) -#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) -#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) -#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) -#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) -#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) -#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) -#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) -#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) -#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) -#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) -#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) -#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) -#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) -#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) -#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) -#define GPIO78_nPCE_2_MD (78 | GPIO_ALT_FN_1_OUT) -#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) -#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) -#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) -#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) -#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) -#define GPIO81_CIF_DD_0_MD (81 | GPIO_ALT_FN_2_IN) -#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) -#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) -#define GPIO82_CIF_DD_5_MD (82 | GPIO_ALT_FN_3_IN) -#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) -#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) -#define GPIO83_CIF_DD_4_MD (83 | GPIO_ALT_FN_3_IN) -#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) -#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) -#define GPIO84_CIF_FV_MD (84 | GPIO_ALT_FN_3_IN) -#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) -#define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN) -#define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT) -#define GPIO88_USBH1_PWR_MD (88 | GPIO_ALT_FN_1_IN) -#define GPIO89_USBH1_PEN_MD (89 | GPIO_ALT_FN_2_OUT) -#define GPIO90_CIF_DD_4_MD (90 | GPIO_ALT_FN_3_IN) -#define GPIO91_CIF_DD_5_MD (91 | GPIO_ALT_FN_3_IN) -#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) -#define GPIO93_CIF_DD_6_MD (93 | GPIO_ALT_FN_2_IN) -#define GPIO94_CIF_DD_5_MD (94 | GPIO_ALT_FN_2_IN) -#define GPIO95_CIF_DD_4_MD (95 | GPIO_ALT_FN_2_IN) -#define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN) -#define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN) -#define GPIO96_FFRXD_MD (96 | GPIO_ALT_FN_3_IN) -#define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN) -#define GPIO98_CIF_DD_0_MD (98 | GPIO_ALT_FN_2_IN) -#define GPIO98_FFRTS_MD (98 | GPIO_ALT_FN_3_OUT) -#define GPIO99_FFTXD_MD (99 | GPIO_ALT_FN_3_OUT) -#define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN) -#define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN) -#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) -#define GPIO102_KP_MKIN2_MD (102 | GPIO_ALT_FN_1_IN) -#define GPIO103_CIF_DD_3_MD (103 | GPIO_ALT_FN_1_IN) -#define GPIO103_KP_MKOUT0_MD (103 | GPIO_ALT_FN_2_OUT) -#define GPIO104_CIF_DD_2_MD (104 | GPIO_ALT_FN_1_IN) -#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) -#define GPIO104_KP_MKOUT1_MD (104 | GPIO_ALT_FN_2_OUT) -#define GPIO105_CIF_DD_1_MD (105 | GPIO_ALT_FN_1_IN) -#define GPIO105_KP_MKOUT2_MD (105 | GPIO_ALT_FN_2_OUT) -#define GPIO106_CIF_DD_9_MD (106 | GPIO_ALT_FN_1_IN) -#define GPIO106_KP_MKOUT3_MD (106 | GPIO_ALT_FN_2_OUT) -#define GPIO107_CIF_DD_8_MD (107 | GPIO_ALT_FN_1_IN) -#define GPIO107_KP_MKOUT4_MD (107 | GPIO_ALT_FN_2_OUT) -#define GPIO108_CIF_DD_7_MD (108 | GPIO_ALT_FN_1_IN) -#define GPIO108_KP_MKOUT5_MD (108 | GPIO_ALT_FN_2_OUT) -#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) -#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) -#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) -#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN) -#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) - -/* - * Handy routine to set GPIO alternate functions - */ -extern int pxa_gpio_mode( int gpio_mode ); - -#endif /* __ASM_ARCH_PXA2XX_GPIO_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/include/mach/regs-u2d.h index 44b0b20b69a4..c15c0c57de08 100644 --- a/arch/arm/mach-pxa/include/mach/regs-u2d.h +++ b/arch/arm/mach-pxa/include/mach/regs-u2d.h @@ -166,7 +166,8 @@ #define U2DMACSR_BUSERRTYPE (7 << 10) /* PX Bus Error Type */ #define U2DMACSR_EORINTR (1 << 9) /* End Of Receive */ #define U2DMACSR_REQPEND (1 << 8) /* Request Pending */ -#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */ +#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */ +#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */ #define U2DMACSR_ENDINTR (1 << 2) /* End Interrupt (read / write 1 clear) */ #define U2DMACSR_STARTINTR (1 << 1) /* Start Interrupt (read / write 1 clear) */ #define U2DMACSR_BUSERRINTR (1 << 0) /* Bus Error Interrupt (read / write 1 clear) */ diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h deleted file mode 100644 index be1be5b6db51..000000000000 --- a/arch/arm/mach-pxa/include/mach/ssp.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * ssp.h - * - * Copyright (C) 2003 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This driver supports the following PXA CPU/SSP ports:- - * - * PXA250 SSP - * PXA255 SSP, NSSP - * PXA26x SSP, NSSP, ASSP - * PXA27x SSP1, SSP2, SSP3 - * PXA3xx SSP1, SSP2, SSP3, SSP4 - */ - -#ifndef __ASM_ARCH_SSP_H -#define __ASM_ARCH_SSP_H - -#include -#include - -enum pxa_ssp_type { - SSP_UNDEFINED = 0, - PXA25x_SSP, /* pxa 210, 250, 255, 26x */ - PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ - PXA27x_SSP, -}; - -struct ssp_device { - struct platform_device *pdev; - struct list_head node; - - struct clk *clk; - void __iomem *mmio_base; - unsigned long phys_base; - - const char *label; - int port_id; - int type; - int use_count; - int irq; - int drcmr_rx; - int drcmr_tx; -}; - -#ifdef CONFIG_PXA_SSP_LEGACY -/* - * SSP initialisation flags - */ -#define SSP_NO_IRQ 0x1 /* don't register an irq handler in SSP driver */ - -struct ssp_state { - u32 cr0; - u32 cr1; - u32 to; - u32 psp; -}; - -struct ssp_dev { - struct ssp_device *ssp; - u32 port; - u32 mode; - u32 flags; - u32 psp_flags; - u32 speed; - int irq; -}; - -int ssp_write_word(struct ssp_dev *dev, u32 data); -int ssp_read_word(struct ssp_dev *dev, u32 *data); -int ssp_flush(struct ssp_dev *dev); -void ssp_enable(struct ssp_dev *dev); -void ssp_disable(struct ssp_dev *dev); -void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp); -void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp); -int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags); -int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed); -void ssp_exit(struct ssp_dev *dev); -#endif /* CONFIG_PXA_SSP_LEGACY */ - -/** - * ssp_write_reg - Write to a SSP register - * - * @dev: SSP device to access - * @reg: Register to write to - * @val: Value to be written. - */ -static inline void ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val) -{ - __raw_writel(val, dev->mmio_base + reg); -} - -/** - * ssp_read_reg - Read from a SSP register - * - * @dev: SSP device to access - * @reg: Register to read from - */ -static inline u32 ssp_read_reg(struct ssp_device *dev, u32 reg) -{ - return __raw_readl(dev->mmio_base + reg); -} - -struct ssp_device *ssp_request(int port, const char *label); -void ssp_free(struct ssp_device *); -#endif /* __ASM_ARCH_SSP_H */ diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index 4df2d38507dc..1bbd1f2e4beb 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -167,7 +167,7 @@ #define TOSA_KEY_SYNC KEY_102ND /* ??? */ -#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES +#ifndef CONFIG_TOSA_USE_EXT_KEYCODES #define TOSA_KEY_RECORD KEY_YEN #define TOSA_KEY_ADDRESSBOOK KEY_KATAKANA #define TOSA_KEY_CANCEL KEY_ESC diff --git a/arch/arm/mach-pxa/include/mach/vpac270.h b/arch/arm/mach-pxa/include/mach/vpac270.h new file mode 100644 index 000000000000..7bfa3dd0fd5e --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/vpac270.h @@ -0,0 +1,42 @@ +/* + * GPIOs and interrupts for Voipac PXA270 + * + * Copyright (C) 2010 + * Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_VPAC270_H_ +#define _INCLUDE_VPAC270_H_ + +#define GPIO1_VPAC270_USER_BTN 1 + +#define GPIO15_VPAC270_LED_ORANGE 15 + +#define GPIO81_VPAC270_BKL_ON 81 +#define GPIO83_VPAC270_NL_ON 83 + +#define GPIO52_VPAC270_SD_READONLY 52 +#define GPIO53_VPAC270_SD_DETECT_N 53 + +#define GPIO84_VPAC270_PCMCIA_CD 84 +#define GPIO35_VPAC270_PCMCIA_RDY 35 +#define GPIO107_VPAC270_PCMCIA_PPEN 107 +#define GPIO11_VPAC270_PCMCIA_RESET 11 +#define GPIO17_VPAC270_CF_CD 17 +#define GPIO12_VPAC270_CF_RDY 12 +#define GPIO16_VPAC270_CF_RESET 16 + +#define GPIO41_VPAC270_UDC_DETECT 41 + +#define GPIO114_VPAC270_ETH_IRQ 114 + +#define GPIO36_VPAC270_IDE_IRQ 36 + +#define GPIO113_VPAC270_TS_IRQ 113 + +#endif diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h new file mode 100644 index 000000000000..8835c16bc82f --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/z2.h @@ -0,0 +1,41 @@ +/* + * arch/arm/mach-pxa/include/mach/z2.h + * + * Author: Ken McGuire + * Created: Feb 6, 2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ASM_ARCH_ZIPIT2_H +#define ASM_ARCH_ZIPIT2_H + +/* LEDs */ +#define GPIO10_ZIPITZ2_LED_WIFI 10 +#define GPIO85_ZIPITZ2_LED_CHARGED 85 +#define GPIO83_ZIPITZ2_LED_CHARGING 83 + +/* SD/MMC */ +#define GPIO96_ZIPITZ2_SD_DETECT 96 + +/* GPIO Buttons */ +#define GPIO1_ZIPITZ2_POWER_BUTTON 1 +#define GPIO98_ZIPITZ2_LID_BUTTON 98 + +/* Libertas GSPI8686 WiFi */ +#define GPIO14_ZIPITZ2_WIFI_RESET 14 +#define GPIO15_ZIPITZ2_WIFI_POWER 15 +#define GPIO24_ZIPITZ2_WIFI_CS 24 +#define GPIO36_ZIPITZ2_WIFI_IRQ 36 + +/* LCD */ +#define GPIO19_ZIPITZ2_LCD_RESET 19 +#define GPIO88_ZIPITZ2_LCD_CS 88 + +/* MISC GPIOs */ +#define GPIO0_ZIPITZ2_AC_DETECT 0 +#define GPIO37_ZIPITZ2_HEADSET_DETECT 37 + +#endif diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index fa527b258d61..9b9046185b00 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -41,7 +41,6 @@ #include #include -#include #include #include #include @@ -272,7 +271,7 @@ static inline void littleton_init_keypad(void) {} #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) static struct pxamci_platform_data littleton_mci_platform_data = { - .detect_delay = 20, + .detect_delay_ms = 200, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .gpio_card_detect = GPIO_MMC1_CARD_DETECT, .gpio_card_ro = -1, diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 63d65a2a0387..330c3282856e 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -478,7 +478,7 @@ static void lubbock_mci_exit(struct device *dev, void *data) static struct pxamci_platform_data lubbock_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .detect_delay = 1, + .detect_delay_ms = 10, .init = lubbock_mci_init, .get_ro = lubbock_mci_get_ro, .exit = lubbock_mci_exit, diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index cf6b720c055f..1d1419b73457 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -81,6 +81,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c) PGSR(bank) &= ~mask; is_out = 1; break; + case MFP_LPM_INPUT: case MFP_LPM_DEFAULT: break; default: @@ -178,8 +179,17 @@ int gpio_set_wake(unsigned int gpio, unsigned int on) if (!d->valid) return -EINVAL; - if (d->keypad_gpio) - return -EINVAL; + /* Allow keypad GPIOs to wakeup system when + * configured as generic GPIOs. + */ + if (d->keypad_gpio && (MFP_AF(d->config) == 0) && + (d->config & MFP_LPM_CAN_WAKEUP)) { + if (on) + PKWR |= d->mask; + else + PKWR &= ~d->mask; + return 0; + } mux_taken = (PWER & d->mux_mask) & (~d->mask); if (on && mux_taken) @@ -239,21 +249,25 @@ static int pxa27x_pkwr_gpio[] = { int keypad_set_wake(unsigned int on) { unsigned int i, gpio, mask = 0; - - if (!on) { - PKWR = 0; - return 0; - } + struct gpio_desc *d; for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) { gpio = pxa27x_pkwr_gpio[i]; + d = &gpio_desc[gpio]; - if (gpio_desc[gpio].config & MFP_LPM_CAN_WAKEUP) + /* skip if configured as generic GPIO */ + if (MFP_AF(d->config) == 0) + continue; + + if (d->config & MFP_LPM_CAN_WAKEUP) mask |= gpio_desc[gpio].mask; } - PKWR = mask; + if (on) + PKWR |= mask; + else + PKWR &= ~mask; return 0; } @@ -328,6 +342,17 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) { int i; + /* set corresponding PGSR bit of those marked MFP_LPM_KEEP_OUTPUT */ + for (i = 0; i < pxa_last_gpio; i++) { + if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) && + (GPDR(i) & GPIO_bit(i))) { + if (GPLR(i) & GPIO_bit(i)) + PGSR(i) |= GPIO_bit(i); + else + PGSR(i) &= ~GPIO_bit(i); + } + } + for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) { saved_gafr[0][i] = GAFR_L(i); diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 7a50ed8fce94..d60db87dde08 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -426,6 +426,7 @@ struct gpio_vbus_mach_info gpio_vbus_data = { * to give the card a chance to fully insert/eject. */ static struct pxamci_platform_data mioa701_mci_info = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .gpio_card_detect = GPIO15_SDIO_INSERT, .gpio_card_ro = GPIO78_SDIO_RO, @@ -791,7 +792,6 @@ static void __init mioa701_machine_init(void) mio_gpio_request(ARRAY_AND_SIZE(global_gpios)); bootstrap_init(); set_pxa_fb_info(&mioa701_pxafb_info); - mioa701_mci_info.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&mioa701_mci_info); pxa_set_keypad_info(&mioa701_keypad_info); wm97xx_bat_set_pdata(&mioa701_battery_data); diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index 8c9c6f0d56bb..462167ac05f9 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -325,7 +325,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = { #if defined(CONFIG_MMC) static struct pxamci_platform_data mxm_8x10_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .detect_delay = 1, + .detect_delay_ms = 10, .gpio_card_detect = MXM_8X10_SD_nCD, .gpio_card_ro = MXM_8X10_SD_WP, .gpio_power = -1 diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index f70c75b38769..1963819dba98 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -168,7 +168,7 @@ static struct pxamci_platform_data palmld_mci_platform_data = { .gpio_card_detect = GPIO_NR_PALMLD_SD_DETECT_N, .gpio_card_ro = GPIO_NR_PALMLD_SD_READONLY, .gpio_power = GPIO_NR_PALMLD_SD_POWER, - .detect_delay = 20, + .detect_delay_ms = 200, }; /****************************************************************************** diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index d902a813aae3..5305a3993e69 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -110,7 +110,7 @@ static struct pxamci_platform_data palmt5_mci_platform_data = { .gpio_card_detect = GPIO_NR_PALMT5_SD_DETECT_N, .gpio_card_ro = GPIO_NR_PALMT5_SD_READONLY, .gpio_power = GPIO_NR_PALMT5_SD_POWER, - .detect_delay = 20, + .detect_delay_ms = 200, }; /****************************************************************************** diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 717d7a638675..033b567e50bb 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -121,7 +121,7 @@ static struct pxamci_platform_data palmtc_mci_platform_data = { .gpio_power = GPIO_NR_PALMTC_SD_POWER, .gpio_card_ro = GPIO_NR_PALMTC_SD_READONLY, .gpio_card_detect = GPIO_NR_PALMTC_SD_DETECT_N, - .detect_delay = 20, + .detect_delay_ms = 200, }; /****************************************************************************** diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 007b58c11f8d..ecc1a401598e 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -170,7 +170,7 @@ static struct pxamci_platform_data palmtx_mci_platform_data = { .gpio_card_detect = GPIO_NR_PALMTX_SD_DETECT_N, .gpio_card_ro = GPIO_NR_PALMTX_SD_READONLY, .gpio_power = GPIO_NR_PALMTX_SD_POWER, - .detect_delay = 20, + .detect_delay_ms = 200, }; /****************************************************************************** diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 9d0ecea1760c..f56ae1008759 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -326,7 +326,7 @@ static void pcm990_mci_exit(struct device *dev, void *data) #define MSECS_PER_JIFFY (1000/HZ) static struct pxamci_platform_data pcm990_mci_platform_data = { - .detect_delay = 250 / MSECS_PER_JIFFY, + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .init = pcm990_mci_init, .setpower = pcm990_mci_setpower, diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index d58a52415d75..f4abdaafdac4 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -40,13 +40,12 @@ #include #include #include -#include #include #include #include #include -#include #include +#include #include #include @@ -277,6 +276,7 @@ static void poodle_mci_exit(struct device *dev, void *data) } static struct pxamci_platform_data poodle_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .init = poodle_mci_init, .setpower = poodle_mci_setpower, @@ -450,7 +450,6 @@ static void __init poodle_init(void) set_pxa_fb_parent(&poodle_locomo_device.dev); set_pxa_fb_info(&poodle_fb_info); pxa_set_udc_info(&udc_info); - poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); pxa_set_i2c_info(NULL); diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 4d7c03e72504..f544e58e1536 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 44bb675e47f1..d4b61b3f08f3 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -714,7 +714,7 @@ static void raumfeld_mci_exit(struct device *dev, void *data) static struct pxamci_platform_data raumfeld_mci_platform_data = { .init = raumfeld_mci_init, .exit = raumfeld_mci_exit, - .detect_delay = 20, + .detect_delay_ms = 200, .gpio_card_detect = -1, .gpio_card_ro = -1, .gpio_power = -1, @@ -983,7 +983,7 @@ static void __init raumfeld_common_init(void) int i; for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++) - if (!strcmp(gpio_keys_button[i].desc, "on/off button")) + if (!strcmp(gpio_keys_button[i].desc, "on_off button")) gpio_keys_button[i].active_low = 1; } @@ -1009,8 +1009,7 @@ static void __init raumfeld_common_init(void) gpio_direction_output(GPIO_W2W_PDN, 0); /* this can be used to switch off the device */ - ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, - "supply shutdown"); + ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown"); if (ret < 0) pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n"); else diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h index 1439785d3979..0cc1203c5bef 100644 --- a/arch/arm/mach-pxa/sharpsl.h +++ b/arch/arm/mach-pxa/sharpsl.h @@ -9,29 +9,6 @@ #include -/* - * SharpSL SSP Driver - */ -struct corgissp_machinfo { - int port; - int cs_lcdcon; - int cs_ads7846; - int cs_max1111; - int clk_lcdcon; - int clk_ads7846; - int clk_max1111; -}; - -void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo); - - -/* - * SharpSL/Corgi LCD Driver - */ -void corgi_lcdtg_suspend(void); -void corgi_lcdtg_hw_init(int mode); - - /* * SharpSL Battery/PM Driver */ diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 463d874bb867..cb4767251f3c 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 19b5109d9808..4d2413ed0ffa 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -86,6 +86,7 @@ static unsigned long spitz_pin_config[] __initdata = { /* GPIOs */ GPIO9_GPIO, /* SPITZ_GPIO_nSD_DETECT */ + GPIO16_GPIO, /* SPITZ_GPIO_SYNC */ GPIO81_GPIO, /* SPITZ_GPIO_nSD_WP */ GPIO41_GPIO, /* SPITZ_GPIO_USB_CONNECT */ GPIO37_GPIO, /* SPITZ_GPIO_USB_HOST */ @@ -119,7 +120,8 @@ static unsigned long spitz_pin_config[] __initdata = { GPIO117_I2C_SCL, GPIO118_I2C_SDA, - GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, + GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, /* SPITZ_GPIO_KEY_INT */ + GPIO1_GPIO | WAKEUP_ON_EDGE_FALL, /* SPITZ_GPIO_RESET */ }; /* @@ -363,7 +365,7 @@ static struct gpio_keys_button spitz_gpio_keys[] = { .type = EV_PWR, .code = KEY_SUSPEND, .gpio = SPITZ_GPIO_ON_KEY, - .desc = "On/Off", + .desc = "On Off", .wakeup = 1, }, /* Two buttons detecting the lid state */ @@ -537,6 +539,7 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) } static struct pxamci_platform_data spitz_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .setpower = spitz_mci_setpower, .gpio_card_detect = SPITZ_GPIO_nSD_DETECT, @@ -757,7 +760,6 @@ static void __init common_init(void) spitz_init_spi(); platform_add_devices(devices, ARRAY_SIZE(devices)); - spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&spitz_mci_platform_data); pxa_set_ohci_info(&spitz_ohci_platform_data); pxa_set_ficp_info(&spitz_ficp_platform_data); diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index fc5a70c40358..4209ddf6da61 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -24,9 +24,10 @@ #include #include -#include -#include +#include + #include "sharpsl.h" +#include "generic.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ #define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ @@ -37,10 +38,17 @@ static int spitz_last_ac_status; +static struct gpio spitz_charger_gpios[] = { + { SPITZ_GPIO_KEY_INT, GPIOF_IN, "Keyboard Interrupt" }, + { SPITZ_GPIO_SYNC, GPIOF_IN, "Sync" }, + { SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" }, + { SPITZ_GPIO_JK_B, GPIOF_OUT_INIT_LOW, "JK B" }, + { SPITZ_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" }, +}; + static void spitz_charger_init(void) { - pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN); - pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN); + gpio_request_array(ARRAY_AND_SIZE(spitz_charger_gpios)); } static void spitz_measure_temp(int on) @@ -76,6 +84,11 @@ static void spitz_discharge1(int on) gpio_set_value(SPITZ_GPIO_LED_GREEN, on); } +static unsigned long gpio18_config[] = { + GPIO18_RDY, + GPIO18_GPIO, +}; + static void spitz_presuspend(void) { spitz_last_ac_status = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); @@ -97,7 +110,9 @@ static void spitz_presuspend(void) PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0); - pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH); + pxa2xx_mfp_config(&gpio18_config[0], 1); + gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown"); + gpio_free(18); PRER = GPIO_bit(SPITZ_GPIO_KEY_INT); PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); @@ -114,8 +129,7 @@ static void spitz_presuspend(void) static void spitz_postsuspend(void) { - pxa_gpio_mode(GPIO18_RDY_MD); - pxa_gpio_mode(10 | GPIO_IN); + pxa2xx_mfp_config(&gpio18_config[1], 1); } static int spitz_should_wakeup(unsigned int resume_on_alarm) diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c deleted file mode 100644 index a81d6dbf662d..000000000000 --- a/arch/arm/mach-pxa/ssp.c +++ /dev/null @@ -1,510 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/ssp.c - * - * based on linux/arch/arm/mach-sa1100/ssp.c by Russell King - * - * Copyright (C) 2003 Russell King. - * Copyright (C) 2003 Wolfson Microelectronics PLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * PXA2xx SSP driver. This provides the generic core for simple - * IO-based SSP applications and allows easy port setup for DMA access. - * - * Author: Liam Girdwood - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#ifdef CONFIG_PXA_SSP_LEGACY - -#define TIMEOUT 100000 - -static irqreturn_t ssp_interrupt(int irq, void *dev_id) -{ - struct ssp_dev *dev = dev_id; - struct ssp_device *ssp = dev->ssp; - unsigned int status; - - status = __raw_readl(ssp->mmio_base + SSSR); - __raw_writel(status, ssp->mmio_base + SSSR); - - if (status & SSSR_ROR) - printk(KERN_WARNING "SSP(%d): receiver overrun\n", dev->port); - - if (status & SSSR_TUR) - printk(KERN_WARNING "SSP(%d): transmitter underrun\n", dev->port); - - if (status & SSSR_BCE) - printk(KERN_WARNING "SSP(%d): bit count error\n", dev->port); - - return IRQ_HANDLED; -} - -/** - * ssp_write_word - write a word to the SSP port - * @data: 32-bit, MSB justified data to write. - * - * Wait for a free entry in the SSP transmit FIFO, and write a data - * word to the SSP port. - * - * The caller is expected to perform the necessary locking. - * - * Returns: - * %-ETIMEDOUT timeout occurred - * 0 success - */ -int ssp_write_word(struct ssp_dev *dev, u32 data) -{ - struct ssp_device *ssp = dev->ssp; - int timeout = TIMEOUT; - - while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_TNF)) { - if (!--timeout) - return -ETIMEDOUT; - cpu_relax(); - } - - __raw_writel(data, ssp->mmio_base + SSDR); - - return 0; -} - -/** - * ssp_read_word - read a word from the SSP port - * - * Wait for a data word in the SSP receive FIFO, and return the - * received data. Data is LSB justified. - * - * Note: Currently, if data is not expected to be received, this - * function will wait for ever. - * - * The caller is expected to perform the necessary locking. - * - * Returns: - * %-ETIMEDOUT timeout occurred - * 32-bit data success - */ -int ssp_read_word(struct ssp_dev *dev, u32 *data) -{ - struct ssp_device *ssp = dev->ssp; - int timeout = TIMEOUT; - - while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE)) { - if (!--timeout) - return -ETIMEDOUT; - cpu_relax(); - } - - *data = __raw_readl(ssp->mmio_base + SSDR); - return 0; -} - -/** - * ssp_flush - flush the transmit and receive FIFOs - * - * Wait for the SSP to idle, and ensure that the receive FIFO - * is empty. - * - * The caller is expected to perform the necessary locking. - */ -int ssp_flush(struct ssp_dev *dev) -{ - struct ssp_device *ssp = dev->ssp; - int timeout = TIMEOUT * 2; - - /* ensure TX FIFO is empty instead of not full */ - if (cpu_is_pxa3xx()) { - while (__raw_readl(ssp->mmio_base + SSSR) & 0xf00) { - if (!--timeout) - return -ETIMEDOUT; - cpu_relax(); - } - timeout = TIMEOUT * 2; - } - - do { - while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE) { - if (!--timeout) - return -ETIMEDOUT; - (void)__raw_readl(ssp->mmio_base + SSDR); - } - if (!--timeout) - return -ETIMEDOUT; - } while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_BSY); - - return 0; -} - -/** - * ssp_enable - enable the SSP port - * - * Turn on the SSP port. - */ -void ssp_enable(struct ssp_dev *dev) -{ - struct ssp_device *ssp = dev->ssp; - uint32_t sscr0; - - sscr0 = __raw_readl(ssp->mmio_base + SSCR0); - sscr0 |= SSCR0_SSE; - __raw_writel(sscr0, ssp->mmio_base + SSCR0); -} - -/** - * ssp_disable - shut down the SSP port - * - * Turn off the SSP port, optionally powering it down. - */ -void ssp_disable(struct ssp_dev *dev) -{ - struct ssp_device *ssp = dev->ssp; - uint32_t sscr0; - - sscr0 = __raw_readl(ssp->mmio_base + SSCR0); - sscr0 &= ~SSCR0_SSE; - __raw_writel(sscr0, ssp->mmio_base + SSCR0); -} - -/** - * ssp_save_state - save the SSP configuration - * @ssp: pointer to structure to save SSP configuration - * - * Save the configured SSP state for suspend. - */ -void ssp_save_state(struct ssp_dev *dev, struct ssp_state *state) -{ - struct ssp_device *ssp = dev->ssp; - - state->cr0 = __raw_readl(ssp->mmio_base + SSCR0); - state->cr1 = __raw_readl(ssp->mmio_base + SSCR1); - state->to = __raw_readl(ssp->mmio_base + SSTO); - state->psp = __raw_readl(ssp->mmio_base + SSPSP); - - ssp_disable(dev); -} - -/** - * ssp_restore_state - restore a previously saved SSP configuration - * @ssp: pointer to configuration saved by ssp_save_state - * - * Restore the SSP configuration saved previously by ssp_save_state. - */ -void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *state) -{ - struct ssp_device *ssp = dev->ssp; - uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE; - - __raw_writel(sssr, ssp->mmio_base + SSSR); - - __raw_writel(state->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0); - __raw_writel(state->cr1, ssp->mmio_base + SSCR1); - __raw_writel(state->to, ssp->mmio_base + SSTO); - __raw_writel(state->psp, ssp->mmio_base + SSPSP); - __raw_writel(state->cr0, ssp->mmio_base + SSCR0); -} - -/** - * ssp_config - configure SSP port settings - * @mode: port operating mode - * @flags: port config flags - * @psp_flags: port PSP config flags - * @speed: port speed - * - * Port MUST be disabled by ssp_disable before making any config changes. - */ -int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed) -{ - struct ssp_device *ssp = dev->ssp; - - dev->mode = mode; - dev->flags = flags; - dev->psp_flags = psp_flags; - dev->speed = speed; - - /* set up port type, speed, port settings */ - __raw_writel((dev->speed | dev->mode), ssp->mmio_base + SSCR0); - __raw_writel(dev->flags, ssp->mmio_base + SSCR1); - __raw_writel(dev->psp_flags, ssp->mmio_base + SSPSP); - - return 0; -} - -/** - * ssp_init - setup the SSP port - * - * initialise and claim resources for the SSP port. - * - * Returns: - * %-ENODEV if the SSP port is unavailable - * %-EBUSY if the resources are already in use - * %0 on success - */ -int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags) -{ - struct ssp_device *ssp; - int ret; - - ssp = ssp_request(port, "SSP"); - if (ssp == NULL) - return -ENODEV; - - dev->ssp = ssp; - dev->port = port; - - /* do we need to get irq */ - if (!(init_flags & SSP_NO_IRQ)) { - ret = request_irq(ssp->irq, ssp_interrupt, - 0, "SSP", dev); - if (ret) - goto out_region; - dev->irq = ssp->irq; - } else - dev->irq = NO_IRQ; - - /* turn on SSP port clock */ - clk_enable(ssp->clk); - return 0; - -out_region: - ssp_free(ssp); - return ret; -} - -/** - * ssp_exit - undo the effects of ssp_init - * - * release and free resources for the SSP port. - */ -void ssp_exit(struct ssp_dev *dev) -{ - struct ssp_device *ssp = dev->ssp; - - ssp_disable(dev); - if (dev->irq != NO_IRQ) - free_irq(dev->irq, dev); - clk_disable(ssp->clk); - ssp_free(ssp); -} -#endif /* CONFIG_PXA_SSP_LEGACY */ - -static DEFINE_MUTEX(ssp_lock); -static LIST_HEAD(ssp_list); - -struct ssp_device *ssp_request(int port, const char *label) -{ - struct ssp_device *ssp = NULL; - - mutex_lock(&ssp_lock); - - list_for_each_entry(ssp, &ssp_list, node) { - if (ssp->port_id == port && ssp->use_count == 0) { - ssp->use_count++; - ssp->label = label; - break; - } - } - - mutex_unlock(&ssp_lock); - - if (&ssp->node == &ssp_list) - return NULL; - - return ssp; -} -EXPORT_SYMBOL(ssp_request); - -void ssp_free(struct ssp_device *ssp) -{ - mutex_lock(&ssp_lock); - if (ssp->use_count) { - ssp->use_count--; - ssp->label = NULL; - } else - dev_err(&ssp->pdev->dev, "device already free\n"); - mutex_unlock(&ssp_lock); -} -EXPORT_SYMBOL(ssp_free); - -static int __devinit ssp_probe(struct platform_device *pdev) -{ - const struct platform_device_id *id = platform_get_device_id(pdev); - struct resource *res; - struct ssp_device *ssp; - int ret = 0; - - ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL); - if (ssp == NULL) { - dev_err(&pdev->dev, "failed to allocate memory"); - return -ENOMEM; - } - ssp->pdev = pdev; - - ssp->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(ssp->clk)) { - ret = PTR_ERR(ssp->clk); - goto err_free; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - ret = -ENODEV; - goto err_free_clk; - } - - res = request_mem_region(res->start, res->end - res->start + 1, - pdev->name); - if (res == NULL) { - dev_err(&pdev->dev, "failed to request memory resource\n"); - ret = -EBUSY; - goto err_free_clk; - } - - ssp->phys_base = res->start; - - ssp->mmio_base = ioremap(res->start, res->end - res->start + 1); - if (ssp->mmio_base == NULL) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); - ret = -ENODEV; - goto err_free_mem; - } - - ssp->irq = platform_get_irq(pdev, 0); - if (ssp->irq < 0) { - dev_err(&pdev->dev, "no IRQ resource defined\n"); - ret = -ENODEV; - goto err_free_io; - } - - res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (res == NULL) { - dev_err(&pdev->dev, "no SSP RX DRCMR defined\n"); - ret = -ENODEV; - goto err_free_io; - } - ssp->drcmr_rx = res->start; - - res = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (res == NULL) { - dev_err(&pdev->dev, "no SSP TX DRCMR defined\n"); - ret = -ENODEV; - goto err_free_io; - } - ssp->drcmr_tx = res->start; - - /* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id - * starts from 0, do a translation here - */ - ssp->port_id = pdev->id + 1; - ssp->use_count = 0; - ssp->type = (int)id->driver_data; - - mutex_lock(&ssp_lock); - list_add(&ssp->node, &ssp_list); - mutex_unlock(&ssp_lock); - - platform_set_drvdata(pdev, ssp); - return 0; - -err_free_io: - iounmap(ssp->mmio_base); -err_free_mem: - release_mem_region(res->start, res->end - res->start + 1); -err_free_clk: - clk_put(ssp->clk); -err_free: - kfree(ssp); - return ret; -} - -static int __devexit ssp_remove(struct platform_device *pdev) -{ - struct resource *res; - struct ssp_device *ssp; - - ssp = platform_get_drvdata(pdev); - if (ssp == NULL) - return -ENODEV; - - iounmap(ssp->mmio_base); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, res->end - res->start + 1); - - clk_put(ssp->clk); - - mutex_lock(&ssp_lock); - list_del(&ssp->node); - mutex_unlock(&ssp_lock); - - kfree(ssp); - return 0; -} - -static const struct platform_device_id ssp_id_table[] = { - { "pxa25x-ssp", PXA25x_SSP }, - { "pxa25x-nssp", PXA25x_NSSP }, - { "pxa27x-ssp", PXA27x_SSP }, - { }, -}; - -static struct platform_driver ssp_driver = { - .probe = ssp_probe, - .remove = __devexit_p(ssp_remove), - .driver = { - .owner = THIS_MODULE, - .name = "pxa2xx-ssp", - }, - .id_table = ssp_id_table, -}; - -static int __init pxa_ssp_init(void) -{ - return platform_driver_register(&ssp_driver); -} - -static void __exit pxa_ssp_exit(void) -{ - platform_driver_unregister(&ssp_driver); -} - -arch_initcall(pxa_ssp_init); -module_exit(pxa_ssp_exit); - -#ifdef CONFIG_PXA_SSP_LEGACY -EXPORT_SYMBOL(ssp_write_word); -EXPORT_SYMBOL(ssp_read_word); -EXPORT_SYMBOL(ssp_flush); -EXPORT_SYMBOL(ssp_enable); -EXPORT_SYMBOL(ssp_disable); -EXPORT_SYMBOL(ssp_save_state); -EXPORT_SYMBOL(ssp_restore_state); -EXPORT_SYMBOL(ssp_init); -EXPORT_SYMBOL(ssp_exit); -EXPORT_SYMBOL(ssp_config); -#endif - -MODULE_DESCRIPTION("PXA SSP driver"); -MODULE_AUTHOR("Liam Girdwood"); -MODULE_LICENSE("GPL"); - diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 2041eb1d90ba..af40d2a12d37 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -464,8 +464,6 @@ static struct platform_device smc91x_device = { -static struct pxamci_platform_data stargate2_mci_platform_data; - /* * The card detect interrupt isn't debounced so we delay it by 250ms * to give the card a chance to fully insert / eject. @@ -489,8 +487,6 @@ static int stargate2_mci_init(struct device *dev, goto free_power_en; } gpio_direction_input(SG2_GPIO_nSD_DETECT); - /* Delay to allow for full insertion */ - stargate2_mci_platform_data.detect_delay = msecs_to_jiffies(250); err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), stargate2_detect_int, @@ -529,6 +525,7 @@ static void stargate2_mci_exit(struct device *dev, void *data) } static struct pxamci_platform_data stargate2_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .init = stargate2_mci_init, .setpower = stargate2_mci_setpower, diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index ad552791c4ce..7512b822c6ca 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -275,6 +275,7 @@ static void tosa_mci_exit(struct device *dev, void *data) } static struct pxamci_platform_data tosa_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .init = tosa_mci_init, .exit = tosa_mci_exit, @@ -926,7 +927,6 @@ static void __init tosa_init(void) dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12); dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16); - tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&tosa_mci_platform_data); pxa_set_udc_info(&udc_info); pxa_set_ficp_info(&tosa_ficp_platform_data); diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 797f2544d0ce..69689112eae7 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -349,7 +349,7 @@ static void trizeps4_mci_exit(struct device *dev, void *data) static struct pxamci_platform_data trizeps4_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .detect_delay = 1, + .detect_delay_ms= 10, .init = trizeps4_mci_init, .exit = trizeps4_mci_exit, .get_ro = NULL, /* write-protection not supported */ diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 9e0c5c3988a1..e90114a7e246 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include #include @@ -454,7 +455,7 @@ static struct i2c_gpio_platform_data i2c_bus_data = { .sda_pin = VIPER_RTC_I2C_SDA_GPIO, .scl_pin = VIPER_RTC_I2C_SCL_GPIO, .udelay = 10, - .timeout = 100, + .timeout = HZ, }; static struct platform_device i2c_bus_device = { @@ -779,7 +780,7 @@ static void __init viper_tpm_init(void) .sda_pin = VIPER_TPM_I2C_SDA_GPIO, .scl_pin = VIPER_TPM_I2C_SCL_GPIO, .udelay = 10, - .timeout = 100, + .timeout = HZ, }; char *errstr; diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c new file mode 100644 index 000000000000..9884fa978f16 --- /dev/null +++ b/arch/arm/mach-pxa/vpac270.c @@ -0,0 +1,615 @@ +/* + * Hardware definitions for Voipac PXA270 + * + * Copyright (C) 2010 + * Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long vpac270_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO53_GPIO, /* SD detect */ + GPIO52_GPIO, /* SD r/o switch */ + + /* GPIO KEYS */ + GPIO1_GPIO, /* USER BTN */ + + /* LEDs */ + GPIO15_GPIO, /* orange led */ + + /* FFUART */ + GPIO34_FFUART_RXD, + GPIO39_FFUART_TXD, + GPIO27_FFUART_RTS, + GPIO100_FFUART_CTS, + GPIO33_FFUART_DSR, + GPIO40_FFUART_DTR, + GPIO10_FFUART_DCD, + GPIO38_FFUART_RI, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO86_LCD_LDD_16, + GPIO87_LCD_LDD_17, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* PCMCIA */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO55_nPREG, + GPIO57_nIOIS16, + GPIO56_nPWAIT, + GPIO104_PSKTSEL, + GPIO84_GPIO, /* PCMCIA CD */ + GPIO35_GPIO, /* PCMCIA RDY */ + GPIO107_GPIO, /* PCMCIA PPEN */ + GPIO11_GPIO, /* PCMCIA RESET */ + GPIO17_GPIO, /* CF CD */ + GPIO12_GPIO, /* CF RDY */ + GPIO16_GPIO, /* CF RESET */ + + /* UHC */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + GPIO119_USBH2_PWR, + GPIO120_USBH2_PEN, + + /* UDC */ + GPIO41_GPIO, + + /* Ethernet */ + GPIO114_GPIO, /* IRQ */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, + GPIO98_AC97_SYSCLK, + GPIO113_GPIO, /* TS IRQ */ + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* IDE */ + GPIO36_GPIO, /* IDE IRQ */ + GPIO80_DREQ_1, +}; + +/****************************************************************************** + * NOR Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition vpac270_nor_partitions[] = { + { + .name = "Flash", + .offset = 0x00000000, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data vpac270_flash_data[] = { + { + .width = 2, /* bankwidth in bytes */ + .parts = vpac270_nor_partitions, + .nr_parts = ARRAY_SIZE(vpac270_nor_partitions) + } +}; + +static struct resource vpac270_flash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vpac270_flash = { + .name = "physmap-flash", + .id = 0, + .resource = &vpac270_flash_resource, + .num_resources = 1, + .dev = { + .platform_data = vpac270_flash_data, + }, +}; +static void __init vpac270_nor_init(void) +{ + platform_device_register(&vpac270_flash); +} +#else +static inline void vpac270_nor_init(void) {} +#endif + +/****************************************************************************** + * OneNAND Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE) +static struct mtd_partition vpac270_onenand_partitions[] = { + { + .name = "Flash", + .offset = 0x00000000, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct onenand_platform_data vpac270_onenand_info = { + .parts = vpac270_onenand_partitions, + .nr_parts = ARRAY_SIZE(vpac270_onenand_partitions), +}; + +static struct resource vpac270_onenand_resources[] = { + [0] = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_1M, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device vpac270_onenand = { + .name = "onenand-flash", + .id = -1, + .resource = vpac270_onenand_resources, + .num_resources = ARRAY_SIZE(vpac270_onenand_resources), + .dev = { + .platform_data = &vpac270_onenand_info, + }, +}; + +static void __init vpac270_onenand_init(void) +{ + platform_device_register(&vpac270_onenand); +} +#else +static void __init vpac270_onenand_init(void) {} +#endif + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data vpac270_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N, + .gpio_card_ro = GPIO52_VPAC270_SD_READONLY, + .detect_delay_ms = 200, +}; + +static void __init vpac270_mmc_init(void) +{ + pxa_set_mci_info(&vpac270_mci_platform_data); +} +#else +static inline void vpac270_mmc_init(void) {} +#endif + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button vpac270_pxa_buttons[] = { + {KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"}, +}; + +static struct gpio_keys_platform_data vpac270_pxa_keys_data = { + .buttons = vpac270_pxa_buttons, + .nbuttons = ARRAY_SIZE(vpac270_pxa_buttons), +}; + +static struct platform_device vpac270_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &vpac270_pxa_keys_data, + }, +}; + +static void __init vpac270_keys_init(void) +{ + platform_device_register(&vpac270_pxa_keys); +} +#else +static inline void vpac270_keys_init(void) {} +#endif + +/****************************************************************************** + * LED + ******************************************************************************/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +struct gpio_led vpac270_gpio_leds[] = { +{ + .name = "vpac270:orange:user", + .default_trigger = "none", + .gpio = GPIO15_VPAC270_LED_ORANGE, + .active_low = 1, +} +}; + +static struct gpio_led_platform_data vpac270_gpio_led_info = { + .leds = vpac270_gpio_leds, + .num_leds = ARRAY_SIZE(vpac270_gpio_leds), +}; + +static struct platform_device vpac270_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &vpac270_gpio_led_info, + } +}; + +static void __init vpac270_leds_init(void) +{ + platform_device_register(&vpac270_leds); +} +#else +static inline void vpac270_leds_init(void) {} +#endif + +/****************************************************************************** + * USB Host + ******************************************************************************/ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static int vpac270_ohci_init(struct device *dev) +{ + UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; + return 0; +} + +static struct pxaohci_platform_data vpac270_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT1 | ENABLE_PORT2 | + POWER_CONTROL_LOW | POWER_SENSE_LOW, + .init = vpac270_ohci_init, +}; + +static void __init vpac270_uhc_init(void) +{ + pxa_set_ohci_info(&vpac270_ohci_info); +} +#else +static inline void vpac270_uhc_init(void) {} +#endif + +/****************************************************************************** + * USB Gadget + ******************************************************************************/ +#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = { + .gpio_vbus = GPIO41_VPAC270_UDC_DETECT, + .gpio_pullup = -1, +}; + +static struct platform_device vpac270_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &vpac270_gpio_vbus_info, + }, +}; + +static void vpac270_udc_command(int cmd) +{ + if (cmd == PXA2XX_UDC_CMD_CONNECT) + UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE; + else if (cmd == PXA2XX_UDC_CMD_DISCONNECT) + UP2OCR = UP2OCR_HXOE; +} + +static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = { + .udc_command = vpac270_udc_command, + .gpio_pullup = -1, +}; + +static void __init vpac270_udc_init(void) +{ + pxa_set_udc_info(&vpac270_udc_info); + platform_device_register(&vpac270_gpio_vbus); +} +#else +static inline void vpac270_udc_init(void) {} +#endif + +/****************************************************************************** + * Ethernet + ******************************************************************************/ +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource vpac270_dm9000_resources[] = { + [0] = { + .start = PXA_CS2_PHYS + 0x300, + .end = PXA_CS2_PHYS + 0x303, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_CS2_PHYS + 0x304, + .end = PXA_CS2_PHYS + 0x343, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ), + .end = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct dm9000_plat_data vpac270_dm9000_platdata = { + .flags = DM9000_PLATF_32BITONLY, +}; + +static struct platform_device vpac270_dm9000_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(vpac270_dm9000_resources), + .resource = vpac270_dm9000_resources, + .dev = { + .platform_data = &vpac270_dm9000_platdata, + } +}; + +static void __init vpac270_eth_init(void) +{ + platform_device_register(&vpac270_dm9000_device); +} +#else +static inline void vpac270_eth_init(void) {} +#endif + +/****************************************************************************** + * Audio and Touchscreen + ******************************************************************************/ +#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \ + defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) +static pxa2xx_audio_ops_t vpac270_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct ucb1400_pdata vpac270_ucb1400_pdata = { + .irq = IRQ_GPIO(GPIO113_VPAC270_TS_IRQ), +}; + +static struct platform_device vpac270_ucb1400_device = { + .name = "ucb1400_core", + .id = -1, + .dev = { + .platform_data = &vpac270_ucb1400_pdata, + }, +}; + +static void __init vpac270_ts_init(void) +{ + pxa_set_ac97_info(&vpac270_ac97_pdata); + platform_device_register(&vpac270_ucb1400_device); +} +#else +static inline void vpac270_ts_init(void) {} +#endif + +/****************************************************************************** + * RTC + ******************************************************************************/ +#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE) +static struct i2c_board_info __initdata vpac270_i2c_devs[] = { + { + I2C_BOARD_INFO("ds1339", 0x68), + }, +}; + +static void __init vpac270_rtc_init(void) +{ + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs)); +} +#else +static inline void vpac270_rtc_init(void) {} +#endif + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pxafb_mode_info vpac270_lcd_modes[] = { +{ + .pixclock = 57692, + .xres = 640, + .yres = 480, + .bpp = 32, + .depth = 18, + + .left_margin = 144, + .right_margin = 32, + .upper_margin = 13, + .lower_margin = 30, + + .hsync_len = 32, + .vsync_len = 2, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}, +}; + +static struct pxafb_mach_info vpac270_lcd_screen = { + .modes = vpac270_lcd_modes, + .num_modes = ARRAY_SIZE(vpac270_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_18BPP, +}; + +static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info) +{ + gpio_set_value(GPIO81_VPAC270_BKL_ON, on); +} + +static void __init vpac270_lcd_init(void) +{ + int ret; + + ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON"); + if (ret) { + pr_err("Requesting BKL-ON GPIO failed!\n"); + goto err; + } + + ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1); + if (ret) { + pr_err("Setting BKL-ON GPIO direction failed!\n"); + goto err2; + } + + vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power; + set_pxa_fb_info(&vpac270_lcd_screen); + return; + +err2: + gpio_free(GPIO81_VPAC270_BKL_ON); +err: + return; +} +#else +static inline void vpac270_lcd_init(void) {} +#endif + +/****************************************************************************** + * PATA IDE + ******************************************************************************/ +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +static struct pata_platform_info vpac270_pata_pdata = { + .ioport_shift = 1, + .irq_flags = IRQF_TRIGGER_RISING, +}; + +static struct resource vpac270_ide_resources[] = { + [0] = { /* I/O Base address */ + .start = PXA_CS3_PHYS + 0x120, + .end = PXA_CS3_PHYS + 0x13f, + .flags = IORESOURCE_MEM + }, + [1] = { /* CTL Base address */ + .start = PXA_CS3_PHYS + 0x15c, + .end = PXA_CS3_PHYS + 0x15f, + .flags = IORESOURCE_MEM + }, + [2] = { /* IDE IRQ pin */ + .start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), + .end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device vpac270_ide_device = { + .name = "pata_platform", + .num_resources = ARRAY_SIZE(vpac270_ide_resources), + .resource = vpac270_ide_resources, + .dev = { + .platform_data = &vpac270_pata_pdata, + } +}; + +static void __init vpac270_ide_init(void) +{ + platform_device_register(&vpac270_ide_device); +} +#else +static inline void vpac270_ide_init(void) {} +#endif + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static void __init vpac270_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config)); + + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + + vpac270_lcd_init(); + vpac270_mmc_init(); + vpac270_nor_init(); + vpac270_onenand_init(); + vpac270_leds_init(); + vpac270_keys_init(); + vpac270_uhc_init(); + vpac270_udc_init(); + vpac270_eth_init(); + vpac270_ts_init(); + vpac270_rtc_init(); + vpac270_ide_init(); +} + +MACHINE_START(VPAC270, "Voipac PXA270") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = vpac270_init +MACHINE_END diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c new file mode 100644 index 000000000000..f5d1ae3db3a4 --- /dev/null +++ b/arch/arm/mach-pxa/z2.c @@ -0,0 +1,609 @@ +/* + * linux/arch/arm/mach-pxa/z2.c + * + * Support for the Zipit Z2 Handheld device. + * + * Author: Ken McGuire + * Created: Jan 25, 2009 + * Based on mainstone.c as modified for the Zipit Z2. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long z2_pin_config[] = { + + /* LCD - 16bpp Active TFT */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + GPIO19_GPIO, /* LCD reset */ + GPIO88_GPIO, /* LCD chipselect */ + + /* PWM */ + GPIO115_PWM1_OUT, /* Keypad Backlight */ + GPIO11_PWM2_OUT, /* LCD Backlight */ + + /* MMC */ + GPIO32_MMC_CLK, + GPIO112_MMC_CMD, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO96_GPIO, /* SD detect */ + + /* STUART */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* Keypad */ + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, + GPIO38_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, + GPIO16_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, + GPIO17_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + GPIO106_KP_MKOUT_3, + GPIO107_KP_MKOUT_4, + GPIO108_KP_MKOUT_5, + GPIO35_KP_MKOUT_6, + GPIO41_KP_MKOUT_7, + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* SSP1 */ + GPIO23_SSP1_SCLK, /* SSP1_SCK */ + GPIO25_SSP1_TXD, /* SSP1_TXD */ + GPIO26_SSP1_RXD, /* SSP1_RXD */ + + /* SSP2 */ + GPIO22_SSP2_SCLK, /* SSP2_SCK */ + GPIO13_SSP2_TXD, /* SSP2_TXD */ + GPIO40_SSP2_RXD, /* SSP2_RXD */ + + /* LEDs */ + GPIO10_GPIO, /* WiFi LED */ + GPIO83_GPIO, /* Charging LED */ + GPIO85_GPIO, /* Charged LED */ + + /* I2S */ + GPIO28_I2S_BITCLK_OUT, + GPIO29_I2S_SDATA_IN, + GPIO30_I2S_SDATA_OUT, + GPIO31_I2S_SYNC, + GPIO113_I2S_SYSCLK, + + /* MISC */ + GPIO0_GPIO, /* AC power detect */ + GPIO1_GPIO, /* Power button */ + GPIO37_GPIO, /* Headphone detect */ + GPIO98_GPIO, /* Lid switch */ + GPIO14_GPIO, /* WiFi Reset */ + GPIO15_GPIO, /* WiFi Power */ + GPIO24_GPIO, /* WiFi CS */ + GPIO36_GPIO, /* WiFi IRQ */ + GPIO88_GPIO, /* LCD CS */ +}; + +/****************************************************************************** + * NOR Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct resource z2_flash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_8M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct mtd_partition z2_flash_parts[] = { + { + .name = "U-Boot Bootloader", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "Linux Kernel", + .offset = 0x20000, + .size = 0x220000, + }, + { + .name = "Filesystem", + .offset = 0x240000, + .size = 0x5b0000, + }, + { + .name = "U-Boot Environment", + .offset = 0x7f0000, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data z2_flash_data = { + .width = 2, + .parts = z2_flash_parts, + .nr_parts = ARRAY_SIZE(z2_flash_parts), +}; + +static struct platform_device z2_flash = { + .name = "physmap-flash", + .id = -1, + .resource = &z2_flash_resource, + .num_resources = 1, + .dev = { + .platform_data = &z2_flash_data, + }, +}; + +static void __init z2_nor_init(void) +{ + platform_device_register(&z2_flash); +} +#else +static inline void z2_nor_init(void) {} +#endif + +/****************************************************************************** + * Backlight + ******************************************************************************/ +#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct platform_pwm_backlight_data z2_backlight_data[] = { + [0] = { + /* Keypad Backlight */ + .pwm_id = 1, + .max_brightness = 1023, + .dft_brightness = 512, + .pwm_period_ns = 1260320, + }, + [1] = { + /* LCD Backlight */ + .pwm_id = 2, + .max_brightness = 1023, + .dft_brightness = 512, + .pwm_period_ns = 1260320, + }, +}; + +static struct platform_device z2_backlight_devices[2] = { + { + .name = "pwm-backlight", + .id = 0, + .dev = { + .platform_data = &z2_backlight_data[1], + }, + }, + { + .name = "pwm-backlight", + .id = 1, + .dev = { + .platform_data = &z2_backlight_data[0], + }, + }, +}; +static void __init z2_pwm_init(void) +{ + platform_device_register(&z2_backlight_devices[0]); + platform_device_register(&z2_backlight_devices[1]); +} +#else +static inline void z2_pwm_init(void) {} +#endif + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pxafb_mode_info z2_lcd_modes[] = { +{ + .pixclock = 192000, + .xres = 240, + .yres = 320, + .bpp = 16, + + .left_margin = 4, + .right_margin = 8, + .upper_margin = 4, + .lower_margin = 8, + + .hsync_len = 4, + .vsync_len = 4, +}, +}; + +static struct pxafb_mach_info z2_lcd_screen = { + .modes = z2_lcd_modes, + .num_modes = ARRAY_SIZE(z2_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_BIAS_ACTIVE_LOW | + LCD_ALTERNATE_MAPPING, +}; + +static void __init z2_lcd_init(void) +{ + set_pxa_fb_info(&z2_lcd_screen); +} +#else +static inline void z2_lcd_init(void) {} +#endif + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data z2_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_card_detect = GPIO96_ZIPITZ2_SD_DETECT, + .gpio_power = -1, + .gpio_card_ro = -1, + .detect_delay_ms = 200, +}; + +static void __init z2_mmc_init(void) +{ + pxa_set_mci_info(&z2_mci_platform_data); +} +#else +static inline void z2_mmc_init(void) {} +#endif + +/****************************************************************************** + * LEDs + ******************************************************************************/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +struct gpio_led z2_gpio_leds[] = { +{ + .name = "z2:green:wifi", + .default_trigger = "none", + .gpio = GPIO10_ZIPITZ2_LED_WIFI, + .active_low = 1, +}, { + .name = "z2:green:charged", + .default_trigger = "none", + .gpio = GPIO85_ZIPITZ2_LED_CHARGED, + .active_low = 1, +}, { + .name = "z2:amber:charging", + .default_trigger = "none", + .gpio = GPIO83_ZIPITZ2_LED_CHARGING, + .active_low = 1, +}, +}; + +static struct gpio_led_platform_data z2_gpio_led_info = { + .leds = z2_gpio_leds, + .num_leds = ARRAY_SIZE(z2_gpio_leds), +}; + +static struct platform_device z2_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &z2_gpio_led_info, + } +}; + +static void __init z2_leds_init(void) +{ + platform_device_register(&z2_leds); +} +#else +static inline void z2_leds_init(void) {} +#endif + +/****************************************************************************** + * GPIO keyboard + ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) +static unsigned int z2_matrix_keys[] = { + KEY(0, 0, KEY_OPTION), + KEY(1, 0, KEY_UP), + KEY(2, 0, KEY_DOWN), + KEY(3, 0, KEY_LEFT), + KEY(4, 0, KEY_RIGHT), + KEY(5, 0, KEY_END), + KEY(6, 0, KEY_KPPLUS), + + KEY(0, 1, KEY_HOME), + KEY(1, 1, KEY_Q), + KEY(2, 1, KEY_I), + KEY(3, 1, KEY_G), + KEY(4, 1, KEY_X), + KEY(5, 1, KEY_ENTER), + KEY(6, 1, KEY_KPMINUS), + + KEY(0, 2, KEY_PAGEUP), + KEY(1, 2, KEY_W), + KEY(2, 2, KEY_O), + KEY(3, 2, KEY_H), + KEY(4, 2, KEY_C), + KEY(5, 2, KEY_LEFTALT), + + KEY(0, 3, KEY_PAGEDOWN), + KEY(1, 3, KEY_E), + KEY(2, 3, KEY_P), + KEY(3, 3, KEY_J), + KEY(4, 3, KEY_V), + KEY(5, 3, KEY_LEFTSHIFT), + + KEY(0, 4, KEY_ESC), + KEY(1, 4, KEY_R), + KEY(2, 4, KEY_A), + KEY(3, 4, KEY_K), + KEY(4, 4, KEY_B), + KEY(5, 4, KEY_LEFTCTRL), + + KEY(0, 5, KEY_TAB), + KEY(1, 5, KEY_T), + KEY(2, 5, KEY_S), + KEY(3, 5, KEY_L), + KEY(4, 5, KEY_N), + KEY(5, 5, KEY_SPACE), + + KEY(0, 6, KEY_STOPCD), + KEY(1, 6, KEY_Y), + KEY(2, 6, KEY_D), + KEY(3, 6, KEY_BACKSPACE), + KEY(4, 6, KEY_M), + KEY(5, 6, KEY_COMMA), + + KEY(0, 7, KEY_PLAYCD), + KEY(1, 7, KEY_U), + KEY(2, 7, KEY_F), + KEY(3, 7, KEY_Z), + KEY(4, 7, KEY_SEMICOLON), + KEY(5, 7, KEY_DOT), +}; + +static struct pxa27x_keypad_platform_data z2_keypad_platform_data = { + .matrix_key_rows = 7, + .matrix_key_cols = 8, + .matrix_key_map = z2_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(z2_matrix_keys), + + .debounce_interval = 30, +}; + +static void __init z2_mkp_init(void) +{ + pxa_set_keypad_info(&z2_keypad_platform_data); +} +#else +static inline void z2_mkp_init(void) {} +#endif + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button z2_pxa_buttons[] = { + {KEY_POWER, GPIO1_ZIPITZ2_POWER_BUTTON, 0, "Power Button" }, + {KEY_CLOSE, GPIO98_ZIPITZ2_LID_BUTTON, 0, "Lid Button" }, +}; + +static struct gpio_keys_platform_data z2_pxa_keys_data = { + .buttons = z2_pxa_buttons, + .nbuttons = ARRAY_SIZE(z2_pxa_buttons), +}; + +static struct platform_device z2_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &z2_pxa_keys_data, + }, +}; + +static void __init z2_keys_init(void) +{ + platform_device_register(&z2_pxa_keys); +} +#else +static inline void z2_keys_init(void) {} +#endif + +/****************************************************************************** + * SSP Devices - WiFi and LCD control + ******************************************************************************/ +#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) +/* WiFi */ +static int z2_lbs_spi_setup(struct spi_device *spi) +{ + int ret = 0; + + ret = gpio_request(GPIO15_ZIPITZ2_WIFI_POWER, "WiFi Power"); + if (ret) + goto err; + + ret = gpio_direction_output(GPIO15_ZIPITZ2_WIFI_POWER, 1); + if (ret) + goto err2; + + ret = gpio_request(GPIO14_ZIPITZ2_WIFI_RESET, "WiFi Reset"); + if (ret) + goto err2; + + ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_RESET, 0); + if (ret) + goto err3; + + /* Reset the card */ + mdelay(180); + gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 1); + mdelay(20); + + spi->bits_per_word = 16; + spi->mode = SPI_MODE_2, + + spi_setup(spi); + + return 0; + +err3: + gpio_free(GPIO14_ZIPITZ2_WIFI_RESET); +err2: + gpio_free(GPIO15_ZIPITZ2_WIFI_POWER); +err: + return ret; +}; + +static int z2_lbs_spi_teardown(struct spi_device *spi) +{ + gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 0); + gpio_set_value(GPIO15_ZIPITZ2_WIFI_POWER, 0); + gpio_free(GPIO14_ZIPITZ2_WIFI_RESET); + gpio_free(GPIO15_ZIPITZ2_WIFI_POWER); + return 0; + +}; + +static struct pxa2xx_spi_chip z2_lbs_chip_info = { + .rx_threshold = 8, + .tx_threshold = 8, + .timeout = 1000, + .gpio_cs = GPIO24_ZIPITZ2_WIFI_CS, +}; + +static struct libertas_spi_platform_data z2_lbs_pdata = { + .use_dummy_writes = 1, + .setup = z2_lbs_spi_setup, + .teardown = z2_lbs_spi_teardown, +}; + +/* LCD */ +static struct pxa2xx_spi_chip lms283_chip_info = { + .rx_threshold = 1, + .tx_threshold = 1, + .timeout = 64, + .gpio_cs = GPIO88_ZIPITZ2_LCD_CS, +}; + +static const struct lms283gf05_pdata lms283_pdata = { + .reset_gpio = GPIO19_ZIPITZ2_LCD_RESET, +}; + +static struct spi_board_info spi_board_info[] __initdata = { +{ + .modalias = "libertas_spi", + .platform_data = &z2_lbs_pdata, + .controller_data = &z2_lbs_chip_info, + .irq = gpio_to_irq(GPIO36_ZIPITZ2_WIFI_IRQ), + .max_speed_hz = 13000000, + .bus_num = 1, + .chip_select = 0, +}, +{ + .modalias = "lms283gf05", + .controller_data = &lms283_chip_info, + .platform_data = &lms283_pdata, + .max_speed_hz = 400000, + .bus_num = 2, + .chip_select = 0, +}, +}; + +static struct pxa2xx_spi_master pxa_ssp1_master_info = { + .clock_enable = CKEN_SSP, + .num_chipselect = 1, + .enable_dma = 1, +}; + +static struct pxa2xx_spi_master pxa_ssp2_master_info = { + .clock_enable = CKEN_SSP2, + .num_chipselect = 1, +}; + +static void __init z2_spi_init(void) +{ + pxa2xx_set_spi_info(1, &pxa_ssp1_master_info); + pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); +} +#else +static inline void z2_spi_init(void) {} +#endif + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static void __init z2_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config)); + + z2_lcd_init(); + z2_mmc_init(); + z2_mkp_init(); + + pxa_set_i2c_info(NULL); + + z2_spi_init(); + z2_nor_init(); + z2_pwm_init(); + z2_leds_init(); + z2_keys_init(); +} + +MACHINE_START(ZIPIT2, "Zipit Z2") + .phys_io = 0x40000000, + .boot_params = 0xa0000100, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = z2_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 39896d883584..3680f6a90623 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -644,7 +644,7 @@ static struct pxafb_mach_info zeus_fb_info = { static struct pxamci_platform_data zeus_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .detect_delay = HZ/4, + .detect_delay_ms = 250, .gpio_card_detect = ZEUS_MMC_CD_GPIO, .gpio_card_ro = ZEUS_MMC_WP_GPIO, .gpio_card_ro_invert = 1, diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 2b4043c04d0c..c479cbecf784 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -218,7 +218,7 @@ static inline void zylonite_init_lcd(void) {} #if defined(CONFIG_MMC) static struct pxamci_platform_data zylonite_mci_platform_data = { - .detect_delay = 20, + .detect_delay_ms= 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .gpio_card_detect = EXT_GPIO(0), .gpio_card_ro = EXT_GPIO(2), @@ -226,7 +226,7 @@ static struct pxamci_platform_data zylonite_mci_platform_data = { }; static struct pxamci_platform_data zylonite_mci2_platform_data = { - .detect_delay = 20, + .detect_delay_ms= 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .gpio_card_detect = EXT_GPIO(1), .gpio_card_ro = EXT_GPIO(3), @@ -234,7 +234,7 @@ static struct pxamci_platform_data zylonite_mci2_platform_data = { }; static struct pxamci_platform_data zylonite_mci3_platform_data = { - .detect_delay = 20, + .detect_delay_ms= 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .gpio_card_detect = EXT_GPIO(30), .gpio_card_ro = EXT_GPIO(31), diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index d3022dabb4aa..3e62aae2225a 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -771,7 +771,7 @@ config CACHE_L2X0 config CACHE_TAUROS2 bool "Enable the Tauros2 L2 cache controller" - depends on ARCH_DOVE + depends on (ARCH_DOVE || ARCH_MMP) default y select OUTER_CACHE help diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 83db12a68d56..0ed29bfeba1c 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -86,9 +86,6 @@ void show_mem(void) printk("Mem-info:\n"); show_free_areas(); for_each_online_node(node) { - pg_data_t *n = NODE_DATA(node); - struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn; - for_each_nodebank (i,mi,node) { struct membank *bank = &mi->bank[i]; unsigned int pfn1, pfn2; @@ -97,8 +94,8 @@ void show_mem(void) pfn1 = bank_pfn_start(bank); pfn2 = bank_pfn_end(bank); - page = map + pfn1; - end = map + pfn2; + page = pfn_to_page(pfn1); + end = pfn_to_page(pfn2 - 1) + 1; do { total++; @@ -603,9 +600,6 @@ void __init mem_init(void) reserved_pages = free_pages = 0; for_each_online_node(node) { - pg_data_t *n = NODE_DATA(node); - struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn; - for_each_nodebank(i, &meminfo, node) { struct membank *bank = &meminfo.bank[i]; unsigned int pfn1, pfn2; @@ -614,8 +608,8 @@ void __init mem_init(void) pfn1 = bank_pfn_start(bank); pfn2 = bank_pfn_end(bank); - page = map + pfn1; - end = map + pfn2; + page = pfn_to_page(pfn1); + end = pfn_to_page(pfn2 - 1) + 1; do { if (PageReserved(page)) diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h index 07be8ad7ec37..7c4870bd5a21 100644 --- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h +++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h @@ -31,7 +31,13 @@ #define DMA_MODE_WRITE 1 #define DMA_MODE_MASK 1 -#define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR) +#define MX1_DMA_REG(offset) MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset)) + +/* DMA Interrupt Mask Register */ +#define MX1_DMA_DIMR MX1_DMA_REG(0x08) + +/* Channel Control Register */ +#define MX1_DMA_CCR(x) MX1_DMA_REG(0x8c + ((x) << 6)) #define IMX_DMA_MEMSIZE_32 (0 << 4) #define IMX_DMA_MEMSIZE_8 (1 << 4) diff --git a/arch/arm/plat-pxa/Kconfig b/arch/arm/plat-pxa/Kconfig index b158e98038ed..da53395a17c6 100644 --- a/arch/arm/plat-pxa/Kconfig +++ b/arch/arm/plat-pxa/Kconfig @@ -1,3 +1,8 @@ if PLAT_PXA +config PXA_SSP + tristate + help + Enable support for PXA2xx SSP ports + endif diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index 0264bfb0ca4f..4aacdd12c9cc 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_PXA3xx) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o obj-$(CONFIG_HAVE_PWM) += pwm.o +obj-$(CONFIG_PXA_SSP) += ssp.o diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 857a6839071c..9e604c80618f 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -316,6 +316,13 @@ enum { MFP_PIN_PMIC_INT, MFP_PIN_RDY, + /* additional pins on MMP2 */ + MFP_PIN_TWSI1_SCL, + MFP_PIN_TWSI1_SDA, + MFP_PIN_TWSI4_SCL, + MFP_PIN_TWSI4_SDA, + MFP_PIN_CLK_REQ, + MFP_PIN_MAX, }; diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/plat-pxa/include/plat/ssp.h similarity index 75% rename from arch/arm/mach-pxa/include/mach/regs-ssp.h rename to arch/arm/plat-pxa/include/plat/ssp.h index 6a2ed35acd59..fe43150690ed 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ssp.h +++ b/arch/arm/plat-pxa/include/plat/ssp.h @@ -1,5 +1,26 @@ -#ifndef __ASM_ARCH_REGS_SSP_H -#define __ASM_ARCH_REGS_SSP_H +/* + * ssp.h + * + * Copyright (C) 2003 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver supports the following PXA CPU/SSP ports:- + * + * PXA250 SSP + * PXA255 SSP, NSSP + * PXA26x SSP, NSSP, ASSP + * PXA27x SSP1, SSP2, SSP3 + * PXA3xx SSP1, SSP2, SSP3, SSP4 + */ + +#ifndef __ASM_ARCH_SSP_H +#define __ASM_ARCH_SSP_H + +#include +#include /* * SSP Serial Port Registers @@ -19,10 +40,7 @@ #define SSRSA (0x34) /* SSP Rx Timeslot Active */ #define SSTSS (0x38) /* SSP Timeslot Status */ #define SSACD (0x3C) /* SSP Audio Clock Divider */ - -#if defined(CONFIG_PXA3xx) #define SSACDD (0x40) /* SSP Audio Clock Dither Divider */ -#endif /* Common PXA2xx bits first */ #define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ @@ -33,29 +51,19 @@ #define SSCR0_National (0x2 << 4) /* National Microwire */ #define SSCR0_ECS (1 << 6) /* External clock select */ #define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ +#define SSCR0_SCR(x) ((x) << 8) /* Serial Clock Rate (mask) */ -#if defined(CONFIG_PXA25x) -#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ -#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ -#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ -#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ -#endif - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) +/* PXA27x, PXA3xx */ #define SSCR0_EDSS (1 << 20) /* Extended data size select */ #define SSCR0_NCS (1 << 21) /* Network clock select */ #define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ #define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ #define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ +#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */ #define SSCR0_ACS (1 << 30) /* Audio clock select */ #define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ -#endif -#if defined(CONFIG_PXA3xx) -#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */ -#endif #define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ #define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ @@ -75,10 +83,6 @@ #define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ #define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ -#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Interrupt Mask */ -#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run interrupt Mask */ -#define SSCR0_NCS (1 << 21) /* Network Clock Select */ -#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */ /* extra bits in PXA255, PXA26x and PXA27x SSP ports */ #define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ @@ -108,27 +112,75 @@ #define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ #define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ -#if defined(CONFIG_PXA3xx) -#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */ -#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */ -#endif -#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ -#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ -#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ -#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ -#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ -#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ -#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ -#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ #define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ +#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ +#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ +#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ +#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ +#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ +#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ +#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ +#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ + +/* PXA3xx */ +#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */ +#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */ +#define SSPSP_TIMING_MASK (0x7f8001f0) #define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ #define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ #define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ -#if defined(CONFIG_PXA3xx) #define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */ -#endif +enum pxa_ssp_type { + SSP_UNDEFINED = 0, + PXA25x_SSP, /* pxa 210, 250, 255, 26x */ + PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ + PXA27x_SSP, + PXA168_SSP, +}; -#endif /* __ASM_ARCH_REGS_SSP_H */ +struct ssp_device { + struct platform_device *pdev; + struct list_head node; + + struct clk *clk; + void __iomem *mmio_base; + unsigned long phys_base; + + const char *label; + int port_id; + int type; + int use_count; + int irq; + int drcmr_rx; + int drcmr_tx; +}; + +/** + * pxa_ssp_write_reg - Write to a SSP register + * + * @dev: SSP device to access + * @reg: Register to write to + * @val: Value to be written. + */ +static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val) +{ + __raw_writel(val, dev->mmio_base + reg); +} + +/** + * pxa_ssp_read_reg - Read from a SSP register + * + * @dev: SSP device to access + * @reg: Register to read from + */ +static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg) +{ + return __raw_readl(dev->mmio_base + reg); +} + +struct ssp_device *pxa_ssp_request(int port, const char *label); +void pxa_ssp_free(struct ssp_device *); +#endif /* __ASM_ARCH_SSP_H */ diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index be58f9fe65b0..b77e018d36c1 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -110,6 +110,7 @@ static const unsigned long mfpr_lpm[] = { MFPR_LPM_PULL_LOW, MFPR_LPM_PULL_HIGH, MFPR_LPM_FLOAT, + MFPR_LPM_INPUT, }; /* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */ diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c new file mode 100644 index 000000000000..c6357e554aba --- /dev/null +++ b/arch/arm/plat-pxa/ssp.c @@ -0,0 +1,224 @@ +/* + * linux/arch/arm/mach-pxa/ssp.c + * + * based on linux/arch/arm/mach-sa1100/ssp.c by Russell King + * + * Copyright (C) 2003 Russell King. + * Copyright (C) 2003 Wolfson Microelectronics PLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * PXA2xx SSP driver. This provides the generic core for simple + * IO-based SSP applications and allows easy port setup for DMA access. + * + * Author: Liam Girdwood + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static DEFINE_MUTEX(ssp_lock); +static LIST_HEAD(ssp_list); + +struct ssp_device *pxa_ssp_request(int port, const char *label) +{ + struct ssp_device *ssp = NULL; + + mutex_lock(&ssp_lock); + + list_for_each_entry(ssp, &ssp_list, node) { + if (ssp->port_id == port && ssp->use_count == 0) { + ssp->use_count++; + ssp->label = label; + break; + } + } + + mutex_unlock(&ssp_lock); + + if (&ssp->node == &ssp_list) + return NULL; + + return ssp; +} +EXPORT_SYMBOL(pxa_ssp_request); + +void pxa_ssp_free(struct ssp_device *ssp) +{ + mutex_lock(&ssp_lock); + if (ssp->use_count) { + ssp->use_count--; + ssp->label = NULL; + } else + dev_err(&ssp->pdev->dev, "device already free\n"); + mutex_unlock(&ssp_lock); +} +EXPORT_SYMBOL(pxa_ssp_free); + +static int __devinit pxa_ssp_probe(struct platform_device *pdev) +{ + const struct platform_device_id *id = platform_get_device_id(pdev); + struct resource *res; + struct ssp_device *ssp; + int ret = 0; + + ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL); + if (ssp == NULL) { + dev_err(&pdev->dev, "failed to allocate memory"); + return -ENOMEM; + } + ssp->pdev = pdev; + + ssp->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(ssp->clk)) { + ret = PTR_ERR(ssp->clk); + goto err_free; + } + + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no SSP RX DRCMR defined\n"); + ret = -ENODEV; + goto err_free_clk; + } + ssp->drcmr_rx = res->start; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (res == NULL) { + dev_err(&pdev->dev, "no SSP TX DRCMR defined\n"); + ret = -ENODEV; + goto err_free_clk; + } + ssp->drcmr_tx = res->start; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no memory resource defined\n"); + ret = -ENODEV; + goto err_free_clk; + } + + res = request_mem_region(res->start, resource_size(res), + pdev->name); + if (res == NULL) { + dev_err(&pdev->dev, "failed to request memory resource\n"); + ret = -EBUSY; + goto err_free_clk; + } + + ssp->phys_base = res->start; + + ssp->mmio_base = ioremap(res->start, resource_size(res)); + if (ssp->mmio_base == NULL) { + dev_err(&pdev->dev, "failed to ioremap() registers\n"); + ret = -ENODEV; + goto err_free_mem; + } + + ssp->irq = platform_get_irq(pdev, 0); + if (ssp->irq < 0) { + dev_err(&pdev->dev, "no IRQ resource defined\n"); + ret = -ENODEV; + goto err_free_io; + } + + /* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id + * starts from 0, do a translation here + */ + ssp->port_id = pdev->id + 1; + ssp->use_count = 0; + ssp->type = (int)id->driver_data; + + mutex_lock(&ssp_lock); + list_add(&ssp->node, &ssp_list); + mutex_unlock(&ssp_lock); + + platform_set_drvdata(pdev, ssp); + return 0; + +err_free_io: + iounmap(ssp->mmio_base); +err_free_mem: + release_mem_region(res->start, resource_size(res)); +err_free_clk: + clk_put(ssp->clk); +err_free: + kfree(ssp); + return ret; +} + +static int __devexit pxa_ssp_remove(struct platform_device *pdev) +{ + struct resource *res; + struct ssp_device *ssp; + + ssp = platform_get_drvdata(pdev); + if (ssp == NULL) + return -ENODEV; + + iounmap(ssp->mmio_base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + clk_put(ssp->clk); + + mutex_lock(&ssp_lock); + list_del(&ssp->node); + mutex_unlock(&ssp_lock); + + kfree(ssp); + return 0; +} + +static const struct platform_device_id ssp_id_table[] = { + { "pxa25x-ssp", PXA25x_SSP }, + { "pxa25x-nssp", PXA25x_NSSP }, + { "pxa27x-ssp", PXA27x_SSP }, + { "pxa168-ssp", PXA168_SSP }, + { }, +}; + +static struct platform_driver pxa_ssp_driver = { + .probe = pxa_ssp_probe, + .remove = __devexit_p(pxa_ssp_remove), + .driver = { + .owner = THIS_MODULE, + .name = "pxa2xx-ssp", + }, + .id_table = ssp_id_table, +}; + +static int __init pxa_ssp_init(void) +{ + return platform_driver_register(&pxa_ssp_driver); +} + +static void __exit pxa_ssp_exit(void) +{ + platform_driver_unregister(&pxa_ssp_driver); +} + +arch_initcall(pxa_ssp_init); +module_exit(pxa_ssp_exit); + +MODULE_DESCRIPTION("PXA SSP driver"); +MODULE_AUTHOR("Liam Girdwood"); +MODULE_LICENSE("GPL"); diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig index 6fced1fe3bf0..3c91cf6192c6 100644 --- a/arch/microblaze/configs/mmu_defconfig +++ b/arch/microblaze/configs/mmu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc6 -# Wed Feb 3 10:02:59 2010 +# Linux kernel version: 2.6.34-rc6 +# Thu May 6 11:22:14 2010 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -22,8 +22,6 @@ CONFIG_GENERIC_CSUM=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y -# CONFIG_PCI is not set -CONFIG_NO_DMA=y CONFIG_DTC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -56,7 +54,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -106,6 +103,8 @@ CONFIG_SLAB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -245,13 +244,20 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Bus Options +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_NET=y # # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -341,7 +347,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -370,6 +378,7 @@ CONFIG_MISC_DEVICES=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -383,9 +392,30 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set @@ -394,6 +424,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851_MLL is not set CONFIG_XILINX_EMACLITE=y @@ -444,6 +475,7 @@ CONFIG_SERIAL_UARTLITE=y CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -471,6 +503,12 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers @@ -502,6 +540,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -572,6 +611,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -595,6 +635,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set CONFIG_CIFS=y CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y @@ -696,6 +737,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SLAB_LEAK is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_SPINLOCK=y # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -741,6 +783,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y # CONFIG_HEART_BEAT is not set @@ -862,5 +905,6 @@ CONFIG_ZLIB_INFLATE=y CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index ce2da535246a..dd3a494257f4 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc6 -# Wed Feb 3 10:03:21 2010 +# Linux kernel version: 2.6.34-rc6 +# Thu May 6 11:25:12 2010 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -22,8 +22,6 @@ CONFIG_GENERIC_CSUM=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y -# CONFIG_PCI is not set -CONFIG_NO_DMA=y CONFIG_DTC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -58,7 +56,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -96,6 +93,8 @@ CONFIG_SLAB=y # CONFIG_MMAP_ALLOW_UNINITIALIZED is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -209,11 +208,14 @@ CONFIG_PROC_DEVICETREE=y # # Advanced setup # +# CONFIG_ADVANCED_OPTIONS is not set # # Default settings for advanced configuration options are used # +CONFIG_LOWMEM_SIZE=0x30000000 CONFIG_KERNEL_START=0x90000000 +CONFIG_TASK_SIZE=0x80000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -235,13 +237,20 @@ CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Bus Options +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_NET=y # # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -413,6 +422,7 @@ CONFIG_MTD_UCLINUX=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -442,6 +452,7 @@ CONFIG_MISC_DEVICES=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -458,6 +469,7 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set @@ -466,6 +478,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851_MLL is not set # CONFIG_XILINX_EMACLITE is not set @@ -516,6 +529,7 @@ CONFIG_SERIAL_UARTLITE=y CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -544,6 +558,12 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers @@ -593,6 +613,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -661,6 +682,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -689,6 +711,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -733,6 +756,7 @@ CONFIG_DEBUG_OBJECTS_TIMERS=y # CONFIG_DEBUG_OBJECTS_WORK is not set CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -758,6 +782,7 @@ CONFIG_DEBUG_SG=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -782,6 +807,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y # CONFIG_HEART_BEAT is not set @@ -901,5 +927,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y diff --git a/arch/microblaze/include/asm/cache.h b/arch/microblaze/include/asm/cache.h index e52210891d78..4efe96a036f7 100644 --- a/arch/microblaze/include/asm/cache.h +++ b/arch/microblaze/include/asm/cache.h @@ -15,7 +15,7 @@ #include -#define L1_CACHE_SHIFT 2 +#define L1_CACHE_SHIFT 5 /* word-granular cache in microblaze */ #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) diff --git a/arch/microblaze/include/asm/dma.h b/arch/microblaze/include/asm/dma.h index 08c073badf19..0d73d0c6de37 100644 --- a/arch/microblaze/include/asm/dma.h +++ b/arch/microblaze/include/asm/dma.h @@ -18,4 +18,10 @@ #define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1) #endif +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + #endif /* _ASM_MICROBLAZE_DMA_H */ diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h index 90731df9e574..4c7b5d037c88 100644 --- a/arch/microblaze/include/asm/exceptions.h +++ b/arch/microblaze/include/asm/exceptions.h @@ -64,12 +64,6 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, void die(const char *str, struct pt_regs *fp, long err); void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr); -#ifdef CONFIG_MMU -void __bug(const char *file, int line, void *data); -int bad_trap(int trap_num, struct pt_regs *regs); -int debug_trap(struct pt_regs *regs); -#endif /* CONFIG_MMU */ - #if defined(CONFIG_KGDB) void (*debugger)(struct pt_regs *regs); int (*debugger_bpt)(struct pt_regs *regs); diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index e45a6eea92e0..00b5398d08c7 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -139,8 +139,6 @@ static inline void writel(unsigned int v, volatile void __iomem *addr) #ifdef CONFIG_MMU -#define mm_ptov(addr) ((void *)__phys_to_virt(addr)) -#define mm_vtop(addr) ((unsigned long)__virt_to_phys(addr)) #define phys_to_virt(addr) ((void *)__phys_to_virt(addr)) #define virt_to_phys(addr) ((unsigned long)__virt_to_phys(addr)) #define virt_to_bus(addr) ((unsigned long)__virt_to_phys(addr)) diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h index 2dd1d04129e0..de493f86d28f 100644 --- a/arch/microblaze/include/asm/page.h +++ b/arch/microblaze/include/asm/page.h @@ -31,6 +31,9 @@ #ifndef __ASSEMBLY__ +/* MS be sure that SLAB allocates aligned objects */ +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES + #define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1))) #define PAGE_DOWN(addr) ((addr)&(~((PAGE_SIZE)-1))) @@ -70,14 +73,7 @@ typedef unsigned long pte_basic_t; #endif /* CONFIG_MMU */ -# ifndef CONFIG_MMU -# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE) -# define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -# define free_user_page(page, addr) free_page(addr) -# else /* CONFIG_MMU */ -extern void copy_page(void *to, void *from); -# endif /* CONFIG_MMU */ - +# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE) # define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE) # define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE) diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index bdd65aaee30d..5a388eeeb28f 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -94,14 +94,6 @@ extern int pci_mmap_legacy_page_range(struct pci_bus *bus, #define HAVE_PCI_LEGACY 1 -/* pci_unmap_{page,single} is a nop so... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) - /* The PCI address space does equal the physical memory * address space (no IOMMU). The IDE and SCSI device layers use * this boolean for bounce buffer decisions. diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h index f44b0d696fe2..c614a893f8a3 100644 --- a/arch/microblaze/include/asm/pgalloc.h +++ b/arch/microblaze/include/asm/pgalloc.h @@ -108,21 +108,7 @@ extern inline void free_pgd_slow(pgd_t *pgd) #define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); }) #define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); }) -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long address) -{ - pte_t *pte; - extern void *early_get_page(void); - if (mem_init_done) { - pte = (pte_t *)__get_free_page(GFP_KERNEL | - __GFP_REPEAT | __GFP_ZERO); - } else { - pte = (pte_t *)early_get_page(); - if (pte) - clear_page(pte); - } - return pte; -} +extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr); static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index dd2bb60651c7..ca2d92871545 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -511,15 +511,6 @@ static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address) extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -/* - * When flushing the tlb entry for a page, we also need to flush the hash - * table entry. flush_hash_page is assembler (for speed) in hashtable.S. - */ -extern int flush_hash_page(unsigned context, unsigned long va, pte_t *ptep); - -/* Add an HPTE to the hash table */ -extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep); - /* * Encode and decode a swap entry. * Note that the bits we use in a PTE for representing a swap entry @@ -533,15 +524,7 @@ extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep); #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 2 }) #define __swp_entry_to_pte(x) ((pte_t) { (x).val << 2 }) - -/* CONFIG_APUS */ -/* For virtual address to physical address conversion */ -extern void cache_clear(__u32 addr, int length); -extern void cache_push(__u32 addr, int length); -extern int mm_end_of_chunk(unsigned long addr, int len); extern unsigned long iopa(unsigned long addr); -/* extern unsigned long mm_ptov(unsigned long addr) \ - __attribute__ ((const)); TBD */ /* Values for nocacheflag and cmode */ /* These are not used by the APUS kernel_map, but prevents @@ -552,18 +535,6 @@ extern unsigned long iopa(unsigned long addr); #define IOMAP_NOCACHE_NONSER 2 #define IOMAP_NO_COPYBACK 3 -/* - * Map some physical address range into the kernel address space. - */ -extern unsigned long kernel_map(unsigned long paddr, unsigned long size, - int nocacheflag, unsigned long *memavailp); - -/* - * Set cache mode of (kernel space) address range. - */ -extern void kernel_set_cachemode(unsigned long address, unsigned long size, - unsigned int cmode); - /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ #define kern_addr_valid(addr) (1) @@ -577,10 +548,6 @@ extern void kernel_set_cachemode(unsigned long address, unsigned long size, void do_page_fault(struct pt_regs *regs, unsigned long address, unsigned long error_code); -void __init io_block_mapping(unsigned long virt, phys_addr_t phys, - unsigned int size, int flags); - -void __init adjust_total_lowmem(void); void mapin_ram(void); int map_page(unsigned long va, phys_addr_t pa, int flags); @@ -601,7 +568,7 @@ void __init *early_get_page(void); extern unsigned long ioremap_bot, ioremap_base; void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle); -void consistent_free(void *vaddr); +void consistent_free(size_t size, void *vaddr); void consistent_sync(void *vaddr, size_t size, int direction); void consistent_sync_page(struct page *page, unsigned long offset, size_t size, int direction); diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c index 0071260a672c..c1b459c97571 100644 --- a/arch/microblaze/kernel/asm-offsets.c +++ b/arch/microblaze/kernel/asm-offsets.c @@ -16,6 +16,7 @@ #include #include #include +#include int main(int argc, char *argv[]) { diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index f04d8a86dead..21c3a92394de 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -96,13 +96,16 @@ static inline void __disable_dcache_nomsr(void) } -/* Helper macro for computing the limits of cache range loops */ +/* Helper macro for computing the limits of cache range loops + * + * End address can be unaligned which is OK for C implementation. + * ASM implementation align it in ASM macros + */ #define CACHE_LOOP_LIMITS(start, end, cache_line_length, cache_size) \ do { \ int align = ~(cache_line_length - 1); \ end = min(start + cache_size, end); \ start &= align; \ - end = ((end & align) + cache_line_length); \ } while (0); /* @@ -111,9 +114,9 @@ do { \ */ #define CACHE_ALL_LOOP(cache_size, line_length, op) \ do { \ - unsigned int len = cache_size; \ + unsigned int len = cache_size - line_length; \ int step = -line_length; \ - BUG_ON(step >= 0); \ + WARN_ON(step >= 0); \ \ __asm__ __volatile__ (" 1: " #op " %0, r0; \ bgtid %0, 1b; \ @@ -122,26 +125,21 @@ do { \ : "memory"); \ } while (0); - -#define CACHE_ALL_LOOP2(cache_size, line_length, op) \ -do { \ - unsigned int len = cache_size; \ - int step = -line_length; \ - BUG_ON(step >= 0); \ - \ - __asm__ __volatile__ (" 1: " #op " r0, %0; \ - bgtid %0, 1b; \ - addk %0, %0, %1; \ - " : : "r" (len), "r" (step) \ - : "memory"); \ -} while (0); - -/* for wdc.flush/clear */ +/* Used for wdc.flush/clear which can use rB for offset which is not possible + * to use for simple wdc or wic. + * + * start address is cache aligned + * end address is not aligned, if end is aligned then I have to substract + * cacheline length because I can't flush/invalidate the next cacheline. + * If is not, I align it because I will flush/invalidate whole line. + */ #define CACHE_RANGE_LOOP_2(start, end, line_length, op) \ do { \ int step = -line_length; \ + int align = ~(line_length - 1); \ + end = ((end & align) == end) ? end - line_length : end & align; \ int count = end - start; \ - BUG_ON(count <= 0); \ + WARN_ON(count < 0); \ \ __asm__ __volatile__ (" 1: " #op " %0, %1; \ bgtid %1, 1b; \ @@ -154,7 +152,9 @@ do { \ #define CACHE_RANGE_LOOP_1(start, end, line_length, op) \ do { \ int volatile temp; \ - BUG_ON(end - start <= 0); \ + int align = ~(line_length - 1); \ + end = ((end & align) == end) ? end - line_length : end & align; \ + WARN_ON(end - start < 0); \ \ __asm__ __volatile__ (" 1: " #op " %1, r0; \ cmpu %0, %1, %2; \ @@ -360,8 +360,12 @@ static void __invalidate_dcache_all_noirq_wt(void) #endif } -/* FIXME this is weird - should be only wdc but not work - * MS: I am getting bus errors and other weird things */ +/* FIXME It is blindly invalidation as is expected + * but can't be called on noMMU in microblaze_cache_init below + * + * MS: noMMU kernel won't boot if simple wdc is used + * The reason should be that there are discared data which kernel needs + */ static void __invalidate_dcache_all_wb(void) { #ifndef ASM_LOOP @@ -369,12 +373,12 @@ static void __invalidate_dcache_all_wb(void) #endif pr_debug("%s\n", __func__); #ifdef ASM_LOOP - CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length, - wdc.clear) + CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, + wdc) #else for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length) - __asm__ __volatile__ ("wdc.clear %0, r0;" \ + __asm__ __volatile__ ("wdc %0, r0;" \ : : "r" (i)); #endif } @@ -393,7 +397,7 @@ static void __invalidate_dcache_range_wb(unsigned long start, #ifdef ASM_LOOP CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.clear); #else - for (i = start; i < end; i += cpuinfo.icache_line_length) + for (i = start; i < end; i += cpuinfo.dcache_line_length) __asm__ __volatile__ ("wdc.clear %0, r0;" \ : : "r" (i)); #endif @@ -413,7 +417,7 @@ static void __invalidate_dcache_range_nomsr_wt(unsigned long start, #ifdef ASM_LOOP CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc); #else - for (i = start; i < end; i += cpuinfo.icache_line_length) + for (i = start; i < end; i += cpuinfo.dcache_line_length) __asm__ __volatile__ ("wdc %0, r0;" \ : : "r" (i)); #endif @@ -437,7 +441,7 @@ static void __invalidate_dcache_range_msr_irq_wt(unsigned long start, #ifdef ASM_LOOP CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc); #else - for (i = start; i < end; i += cpuinfo.icache_line_length) + for (i = start; i < end; i += cpuinfo.dcache_line_length) __asm__ __volatile__ ("wdc %0, r0;" \ : : "r" (i)); #endif @@ -465,7 +469,7 @@ static void __invalidate_dcache_range_nomsr_irq(unsigned long start, #ifdef ASM_LOOP CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc); #else - for (i = start; i < end; i += cpuinfo.icache_line_length) + for (i = start; i < end; i += cpuinfo.dcache_line_length) __asm__ __volatile__ ("wdc %0, r0;" \ : : "r" (i)); #endif @@ -504,7 +508,7 @@ static void __flush_dcache_range_wb(unsigned long start, unsigned long end) #ifdef ASM_LOOP CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.flush); #else - for (i = start; i < end; i += cpuinfo.icache_line_length) + for (i = start; i < end; i += cpuinfo.dcache_line_length) __asm__ __volatile__ ("wdc.flush %0, r0;" \ : : "r" (i)); #endif @@ -650,7 +654,11 @@ void microblaze_cache_init(void) } } } - invalidate_dcache(); +/* FIXME Invalidation is done in U-BOOT + * WT cache: Data is already written to main memory + * WB cache: Discard data on noMMU which caused that kernel doesn't boot + */ + /* invalidate_dcache(); */ enable_dcache(); invalidate_icache(); diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c index 0c912b2a8e03..4216eb1eaa32 100644 --- a/arch/microblaze/kernel/cpu/mb.c +++ b/arch/microblaze/kernel/cpu/mb.c @@ -98,15 +98,17 @@ static int show_cpuinfo(struct seq_file *m, void *v) if (cpuinfo.use_icache) count += seq_printf(m, - "Icache:\t\t%ukB\n", - cpuinfo.icache_size >> 10); + "Icache:\t\t%ukB\tline length:\t%dB\n", + cpuinfo.icache_size >> 10, + cpuinfo.icache_line_length); else count += seq_printf(m, "Icache:\t\tno\n"); if (cpuinfo.use_dcache) { count += seq_printf(m, - "Dcache:\t\t%ukB\n", - cpuinfo.dcache_size >> 10); + "Dcache:\t\t%ukB\tline length:\t%dB\n", + cpuinfo.dcache_size >> 10, + cpuinfo.dcache_line_length); if (cpuinfo.dcache_wb) count += seq_printf(m, "\t\twrite-back\n"); else diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c index ce72dd4967cf..9dcd90b5df55 100644 --- a/arch/microblaze/kernel/dma.c +++ b/arch/microblaze/kernel/dma.c @@ -74,7 +74,7 @@ static void dma_direct_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle) { #ifdef NOT_COHERENT_CACHE - consistent_free(vaddr); + consistent_free(size, vaddr); #else free_pages((unsigned long)vaddr, get_order(size)); #endif diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c index d9f70f83097f..02cbdfe5aa8d 100644 --- a/arch/microblaze/kernel/exceptions.c +++ b/arch/microblaze/kernel/exceptions.c @@ -121,7 +121,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, } printk(KERN_WARNING "Divide by zero exception " \ "in kernel mode.\n"); - die("Divide by exception", regs, SIGBUS); + die("Divide by zero exception", regs, SIGBUS); break; case MICROBLAZE_FPU_EXCEPTION: pr_debug(KERN_WARNING "FPU exception\n"); diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index da6a5f5dc766..1bf739888260 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -28,6 +28,7 @@ * for more details. */ +#include #include #include #include @@ -49,7 +50,7 @@ swapper_pg_dir: #endif /* CONFIG_MMU */ - .text + __HEAD ENTRY(_start) #if CONFIG_KERNEL_BASE_ADDR == 0 brai TOPHYS(real_start) diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c index 6f39e2c001f3..8f120aca123d 100644 --- a/arch/microblaze/kernel/irq.c +++ b/arch/microblaze/kernel/irq.c @@ -9,6 +9,7 @@ */ #include +#include #include #include #include @@ -32,7 +33,7 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map); static u32 concurrent_irq; -void do_IRQ(struct pt_regs *regs) +void __irq_entry do_IRQ(struct pt_regs *regs) { unsigned int irq; struct pt_regs *old_regs = set_irq_regs(regs); diff --git a/arch/microblaze/kernel/misc.S b/arch/microblaze/kernel/misc.S index 7cf86498326c..0fb5fc6c1fc2 100644 --- a/arch/microblaze/kernel/misc.S +++ b/arch/microblaze/kernel/misc.S @@ -93,39 +93,3 @@ early_console_reg_tlb_alloc: nop .size early_console_reg_tlb_alloc, . - early_console_reg_tlb_alloc - -/* - * Copy a whole page (4096 bytes). - */ -#define COPY_16_BYTES \ - lwi r7, r6, 0; \ - lwi r8, r6, 4; \ - lwi r9, r6, 8; \ - lwi r10, r6, 12; \ - swi r7, r5, 0; \ - swi r8, r5, 4; \ - swi r9, r5, 8; \ - swi r10, r5, 12 - - -/* FIXME DCACHE_LINE_BYTES (CONFIG_XILINX_MICROBLAZE0_DCACHE_LINE_LEN * 4)*/ -#define DCACHE_LINE_BYTES (4 * 4) - -.globl copy_page; -.type copy_page, @function -.align 4; -copy_page: - ori r11, r0, (PAGE_SIZE/DCACHE_LINE_BYTES) - 1 -_copy_page_loop: - COPY_16_BYTES -#if DCACHE_LINE_BYTES >= 32 - COPY_16_BYTES -#endif - addik r6, r6, DCACHE_LINE_BYTES - addik r5, r5, DCACHE_LINE_BYTES - bneid r11, _copy_page_loop - addik r11, r11, -1 - rtsd r15, 8 - nop - - .size copy_page, . - copy_page diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c index 5e4570ef515c..75e49202a5ed 100644 --- a/arch/microblaze/kernel/traps.c +++ b/arch/microblaze/kernel/traps.c @@ -95,37 +95,3 @@ void dump_stack(void) show_stack(NULL, NULL); } EXPORT_SYMBOL(dump_stack); - -#ifdef CONFIG_MMU -void __bug(const char *file, int line, void *data) -{ - if (data) - printk(KERN_CRIT "kernel BUG at %s:%d (data = %p)!\n", - file, line, data); - else - printk(KERN_CRIT "kernel BUG at %s:%d!\n", file, line); - - machine_halt(); -} - -int bad_trap(int trap_num, struct pt_regs *regs) -{ - printk(KERN_CRIT - "unimplemented trap %d called at 0x%08lx, pid %d!\n", - trap_num, regs->pc, current->pid); - return -ENOSYS; -} - -int debug_trap(struct pt_regs *regs) -{ - int i; - printk(KERN_CRIT "debug trap\n"); - for (i = 0; i < 32; i++) { - /* printk("r%i:%08X\t",i,regs->gpr[i]); */ - if ((i % 4) == 3) - printk(KERN_CRIT "\n"); - } - printk(KERN_CRIT "pc:%08lX\tmsr:%08lX\n", regs->pc, regs->msr); - return -ENOSYS; -} -#endif diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index 5ef619aad634..db72d7124602 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -24,7 +24,8 @@ SECTIONS { .text : AT(ADDR(.text) - LOAD_OFFSET) { _text = . ; _stext = . ; - *(.text .text.*) + HEAD_TEXT + TEXT_TEXT *(.fixup) EXIT_TEXT EXIT_CALL diff --git a/arch/microblaze/mm/consistent.c b/arch/microblaze/mm/consistent.c index f956e24fe49c..5a59dad62bd2 100644 --- a/arch/microblaze/mm/consistent.c +++ b/arch/microblaze/mm/consistent.c @@ -42,11 +42,12 @@ #include #include #include +#include #ifndef CONFIG_MMU - /* I have to use dcache values because I can't relate on ram size */ -#define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1) +# define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1) +#endif /* * Consistent memory allocators. Used for DMA devices that want to @@ -60,71 +61,16 @@ */ void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle) { - struct page *page, *end, *free; - unsigned long order; - void *ret, *virt; + unsigned long order, vaddr; + void *ret; + unsigned int i, err = 0; + struct page *page, *end; - if (in_interrupt()) - BUG(); - - size = PAGE_ALIGN(size); - order = get_order(size); - - page = alloc_pages(gfp, order); - if (!page) - goto no_page; - - /* We could do with a page_to_phys and page_to_bus here. */ - virt = page_address(page); - ret = ioremap(virt_to_phys(virt), size); - if (!ret) - goto no_remap; - - /* - * Here's the magic! Note if the uncached shadow is not implemented, - * it's up to the calling code to also test that condition and make - * other arranegments, such as manually flushing the cache and so on. - */ -#ifdef CONFIG_XILINX_UNCACHED_SHADOW - ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK); -#endif - /* dma_handle is same as physical (shadowed) address */ - *dma_handle = (dma_addr_t)ret; - - /* - * free wasted pages. We skip the first page since we know - * that it will have count = 1 and won't require freeing. - * We also mark the pages in use as reserved so that - * remap_page_range works. - */ - page = virt_to_page(virt); - free = page + (size >> PAGE_SHIFT); - end = page + (1 << order); - - for (; page < end; page++) { - init_page_count(page); - if (page >= free) - __free_page(page); - else - SetPageReserved(page); - } - - return ret; -no_remap: - __free_pages(page, order); -no_page: - return NULL; -} - -#else - -void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle) -{ - int order, err, i; - unsigned long page, va, flags; +#ifdef CONFIG_MMU phys_addr_t pa; struct vm_struct *area; - void *ret; + unsigned long va; +#endif if (in_interrupt()) BUG(); @@ -133,71 +79,133 @@ void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle) size = PAGE_ALIGN(size); order = get_order(size); - page = __get_free_pages(gfp, order); - if (!page) { - BUG(); + vaddr = __get_free_pages(gfp, order); + if (!vaddr) return NULL; - } /* * we need to ensure that there are no cachelines in use, * or worse dirty in this area. */ - flush_dcache_range(virt_to_phys(page), virt_to_phys(page) + size); + flush_dcache_range(virt_to_phys((void *)vaddr), + virt_to_phys((void *)vaddr) + size); +#ifndef CONFIG_MMU + ret = (void *)vaddr; + /* + * Here's the magic! Note if the uncached shadow is not implemented, + * it's up to the calling code to also test that condition and make + * other arranegments, such as manually flushing the cache and so on. + */ +# ifdef CONFIG_XILINX_UNCACHED_SHADOW + ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK); +# endif + if ((unsigned int)ret > cpuinfo.dcache_base && + (unsigned int)ret < cpuinfo.dcache_high) + printk(KERN_WARNING + "ERROR: Your cache coherent area is CACHED!!!\n"); + + /* dma_handle is same as physical (shadowed) address */ + *dma_handle = (dma_addr_t)ret; +#else /* Allocate some common virtual space to map the new pages. */ area = get_vm_area(size, VM_ALLOC); - if (area == NULL) { - free_pages(page, order); + if (!area) { + free_pages(vaddr, order); return NULL; } va = (unsigned long) area->addr; ret = (void *)va; /* This gives us the real physical address of the first page. */ - *dma_handle = pa = virt_to_bus((void *)page); - - /* MS: This is the whole magic - use cache inhibit pages */ - flags = _PAGE_KERNEL | _PAGE_NO_CACHE; + *dma_handle = pa = virt_to_bus((void *)vaddr); +#endif /* - * Set refcount=1 on all pages in an order>0 - * allocation so that vfree() will actually - * free all pages that were allocated. + * free wasted pages. We skip the first page since we know + * that it will have count = 1 and won't require freeing. + * We also mark the pages in use as reserved so that + * remap_page_range works. */ - if (order > 0) { - struct page *rpage = virt_to_page(page); - for (i = 1; i < (1 << order); i++) - init_page_count(rpage+i); + page = virt_to_page(vaddr); + end = page + (1 << order); + + split_page(page, order); + + for (i = 0; i < size && err == 0; i += PAGE_SIZE) { +#ifdef CONFIG_MMU + /* MS: This is the whole magic - use cache inhibit pages */ + err = map_page(va + i, pa + i, _PAGE_KERNEL | _PAGE_NO_CACHE); +#endif + + SetPageReserved(page); + page++; } - err = 0; - for (i = 0; i < size && err == 0; i += PAGE_SIZE) - err = map_page(va+i, pa+i, flags); + /* Free the otherwise unused pages. */ + while (page < end) { + __free_page(page); + page++; + } if (err) { - vfree((void *)va); + free_pages(vaddr, order); return NULL; } return ret; } -#endif /* CONFIG_MMU */ EXPORT_SYMBOL(consistent_alloc); /* * free page(s) as defined by the above mapping. */ -void consistent_free(void *vaddr) +void consistent_free(size_t size, void *vaddr) { + struct page *page; + if (in_interrupt()) BUG(); + size = PAGE_ALIGN(size); + +#ifndef CONFIG_MMU /* Clear SHADOW_MASK bit in address, and free as per usual */ -#ifdef CONFIG_XILINX_UNCACHED_SHADOW +# ifdef CONFIG_XILINX_UNCACHED_SHADOW vaddr = (void *)((unsigned)vaddr & ~UNCACHED_SHADOW_MASK); +# endif + page = virt_to_page(vaddr); + + do { + ClearPageReserved(page); + __free_page(page); + page++; + } while (size -= PAGE_SIZE); +#else + do { + pte_t *ptep; + unsigned long pfn; + + ptep = pte_offset_kernel(pmd_offset(pgd_offset_k( + (unsigned int)vaddr), + (unsigned int)vaddr), + (unsigned int)vaddr); + if (!pte_none(*ptep) && pte_present(*ptep)) { + pfn = pte_pfn(*ptep); + pte_clear(&init_mm, (unsigned int)vaddr, ptep); + if (pfn_valid(pfn)) { + page = pfn_to_page(pfn); + + ClearPageReserved(page); + __free_page(page); + } + } + vaddr += PAGE_SIZE; + } while (size -= PAGE_SIZE); + + /* flush tlb */ + flush_tlb_all(); #endif - vfree(vaddr); } EXPORT_SYMBOL(consistent_free); @@ -221,7 +229,7 @@ void consistent_sync(void *vaddr, size_t size, int direction) case PCI_DMA_NONE: BUG(); case PCI_DMA_FROMDEVICE: /* invalidate only */ - flush_dcache_range(start, end); + invalidate_dcache_range(start, end); break; case PCI_DMA_TODEVICE: /* writeback only */ flush_dcache_range(start, end); diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c index 7af87f4b2c2c..bab922993185 100644 --- a/arch/microblaze/mm/fault.c +++ b/arch/microblaze/mm/fault.c @@ -273,16 +273,11 @@ bad_area_nosemaphore: * us unable to handle the page fault gracefully. */ out_of_memory: - if (current->pid == 1) { - yield(); - down_read(&mm->mmap_sem); - goto survive; - } up_read(&mm->mmap_sem); - printk(KERN_WARNING "VM: killing process %s\n", current->comm); - if (user_mode(regs)) - do_exit(SIGKILL); - bad_page_fault(regs, address, SIGKILL); + if (!user_mode(regs)) + bad_page_fault(regs, address, SIGKILL); + else + pagefault_out_of_memory(); return; do_sigbus: diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c index d31312cde6ea..784557fb28cf 100644 --- a/arch/microblaze/mm/pgtable.c +++ b/arch/microblaze/mm/pgtable.c @@ -161,24 +161,6 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) return err; } -void __init adjust_total_lowmem(void) -{ -/* TBD */ -#if 0 - unsigned long max_low_mem = MAX_LOW_MEM; - - if (total_lowmem > max_low_mem) { - total_lowmem = max_low_mem; -#ifndef CONFIG_HIGHMEM - printk(KERN_INFO "Warning, memory limited to %ld Mb, use " - "CONFIG_HIGHMEM to reach %ld Mb\n", - max_low_mem >> 20, total_memory >> 20); - total_memory = total_lowmem; -#endif /* CONFIG_HIGHMEM */ - } -#endif -} - /* * Map in all of physical memory starting at CONFIG_KERNEL_START. */ @@ -206,24 +188,6 @@ void __init mapin_ram(void) /* is x a power of 2? */ #define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0)) -/* - * Set up a mapping for a block of I/O. - * virt, phys, size must all be page-aligned. - * This should only be called before ioremap is called. - */ -void __init io_block_mapping(unsigned long virt, phys_addr_t phys, - unsigned int size, int flags) -{ - int i; - - if (virt > CONFIG_KERNEL_START && virt < ioremap_bot) - ioremap_bot = ioremap_base = virt; - - /* Put it in the page tables. */ - for (i = 0; i < size; i += PAGE_SIZE) - map_page(virt + i, phys + i, flags); -} - /* Scan the real Linux page tables and return a PTE pointer for * a virtual address in a context. * Returns true (1) if PTE was found, zero otherwise. The pointer to @@ -274,3 +238,18 @@ unsigned long iopa(unsigned long addr) return pa; } + +__init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + pte_t *pte; + if (mem_init_done) { + pte = (pte_t *)__get_free_page(GFP_KERNEL | + __GFP_REPEAT | __GFP_ZERO); + } else { + pte = (pte_t *)early_get_page(); + if (pte) + clear_page(pte); + } + return pte; +} diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index 740bb32ec57e..01c8c97c15b7 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -1025,7 +1025,7 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus) struct pci_dev *dev = bus->self; - for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) { + pci_bus_for_each_resource(bus, res, i) { res = bus->resource[i]; if (!res) continue; @@ -1131,21 +1131,20 @@ static int skip_isa_ioresource_align(struct pci_dev *dev) * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void pcibios_align_resource(void *data, struct resource *res, +resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; + resource_size_t start = res->start; if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - if (skip_isa_ioresource_align(dev)) - return; - if (start & 0x300) { + return start; + if (start & 0x300) start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } } + + return start; } EXPORT_SYMBOL(pcibios_align_resource); @@ -1228,7 +1227,7 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus) pr_debug("PCI: Allocating bus resources for %04x:%02x...\n", pci_domain_nr(bus), bus->number); - for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) { + pci_bus_for_each_resource(bus, res, i) { res = bus->resource[i]; if (!res || !res->flags || res->start > res->end || res->parent) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 29e86923d1bf..7e6fd1cbd3f8 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -49,7 +49,7 @@ config AR7 family: TNETD7100, 7200 and 7300. config BCM47XX - bool "BCM47XX based boards" + bool "Broadcom BCM47XX based boards" select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT @@ -509,6 +509,7 @@ config SIBYTE_SWARM bool "Sibyte BCM91250A-SWARM" select BOOT_ELF32 select DMA_COHERENT + select HAVE_PATA_PLATFORM select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE @@ -523,6 +524,7 @@ config SIBYTE_LITTLESUR depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT + select HAVE_PATA_PLATFORM select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE @@ -1305,6 +1307,33 @@ config CPU_CAVIUM_OCTEON endchoice +if CPU_LOONGSON2F +config CPU_NOP_WORKAROUNDS + bool + +config CPU_JUMP_WORKAROUNDS + bool + +config CPU_LOONGSON2F_WORKAROUNDS + bool "Loongson 2F Workarounds" + default y + select CPU_NOP_WORKAROUNDS + select CPU_JUMP_WORKAROUNDS + help + Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which + require workarounds. Without workarounds the system may hang + unexpectedly. For more information please refer to the gas + -mfix-loongson2f-nop and -mfix-loongson2f-jump options. + + Loongson 2F03 and later have fixed these issues and no workarounds + are needed. The workarounds have no significant side effect on them + but may decrease the performance of the system so this option should + be disabled unless the kernel is intended to be run on 2F01 or 2F02 + systems. + + If unsure, please say Y. +endif # CPU_LOONGSON2F + config SYS_SUPPORTS_ZBOOT bool select HAVE_KERNEL_GZIP diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 2f2eac233322..0b9c01add0a0 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -136,6 +136,19 @@ cflags-$(CONFIG_CPU_LOONGSON2E) += \ $(call cc-option,-march=loongson2e,-march=r4600) cflags-$(CONFIG_CPU_LOONGSON2F) += \ $(call cc-option,-march=loongson2f,-march=r4600) +# enable the workarounds for loongson2f +ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS + ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),) + $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop) + else + cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop + endif + ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),) + $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump) + else + cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump + endif +endif cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -Wa,-mips32 -Wa,--trap diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c index be7e92ea01f3..887619547553 100644 --- a/arch/mips/alchemy/devboards/db1200/setup.c +++ b/arch/mips/alchemy/devboards/db1200/setup.c @@ -66,12 +66,16 @@ static int __init db1200_arch_init(void) set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); - /* do not autoenable these: CPLD has broken edge int handling, - * and the CD handler setup requires manual enabling to work - * around that. + /* insert/eject pairs: one of both is always screaming. To avoid + * issues they must not be automatically enabled when initially + * requested. */ irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN; irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC0_INSERT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC0_EJECT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC1_INSERT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC1_EJECT_INT)->status |= IRQ_NOAUTOEN; return 0; } diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig index 7fee0273c829..6389ca0fdc6c 100644 --- a/arch/mips/configs/bcm63xx_defconfig +++ b/arch/mips/configs/bcm63xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Sun May 31 20:17:18 2009 +# Linux kernel version: 2.6.34-rc2 +# Tue Mar 23 10:36:32 2010 # CONFIG_MIPS=y @@ -9,13 +9,14 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set +# CONFIG_AR7 is not set # CONFIG_BCM47XX is not set CONFIG_BCM63XX=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set -# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set # CONFIG_NEC_MARKEINS is not set @@ -26,6 +27,7 @@ CONFIG_BCM63XX=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set +# CONFIG_POWERTV is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP28 is not set @@ -45,13 +47,17 @@ CONFIG_BCM63XX=y # CONFIG_WR_PPMC is not set # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set # # CPU support # +CONFIG_BCM63XX_CPU_6338=y +CONFIG_BCM63XX_CPU_6345=y CONFIG_BCM63XX_CPU_6348=y CONFIG_BCM63XX_CPU_6358=y CONFIG_BOARD_BCM963XX=y +CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -69,10 +75,8 @@ CONFIG_CEVT_R4K=y CONFIG_CSRC_R4K_LIB=y CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_EARLY_PRINTK=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_SYS_HAS_EARLY_PRINTK=y -# CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y CONFIG_CPU_BIG_ENDIAN=y @@ -85,7 +89,8 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -128,7 +133,7 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -146,9 +151,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y # CONFIG_HIGH_RES_TIMERS is not set @@ -170,6 +174,7 @@ CONFIG_PREEMPT_NONE=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -189,15 +194,12 @@ CONFIG_LOCALVERSION="" # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y # CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TINY_RCU=y # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -205,11 +207,11 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -223,6 +225,10 @@ CONFIG_BASE_FULL=y # CONFIG_EVENTFD is not set # CONFIG_SHMEM is not set # CONFIG_AIO is not set + +# +# Kernel Performance Events And Counters +# # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set @@ -231,14 +237,17 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -246,14 +255,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -263,15 +299,12 @@ CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set CONFIG_MMU=y CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y CONFIG_CARDBUS=y # @@ -295,6 +328,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set CONFIG_NET=y @@ -333,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -347,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -359,7 +395,27 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_CFG80211=y +CONFIG_NL80211_TESTMODE=y +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_WEXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=y +# CONFIG_MAC80211_RC_PID is not set +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUG_MENU is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -471,6 +527,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -484,13 +541,16 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -529,6 +589,7 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set # CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set @@ -541,17 +602,48 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set CONFIG_BCM63XX_ENET=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set +# CONFIG_ATH_COMMON is not set +CONFIG_B43=y +CONFIG_B43_PCI_AUTOSELECT=y +CONFIG_B43_PCICORE_AUTOSELECT=y +# CONFIG_B43_PCMCIA is not set +CONFIG_B43_PIO=y +# CONFIG_B43_PHY_LP is not set +CONFIG_B43_LEDS=y +# CONFIG_B43_DEBUG is not set +# CONFIG_B43LEGACY is not set +# CONFIG_HOSTAP is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWLWIFI is not set +# CONFIG_LIBERTAS is not set +# CONFIG_HERMES is not set +# CONFIG_P54_COMMON is not set +# CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_ZD1211RW is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -574,6 +666,7 @@ CONFIG_BCM63XX_ENET=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -607,6 +700,7 @@ CONFIG_BCM63XX_ENET=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_SERIAL_BCM63XX=y CONFIG_SERIAL_BCM63XX_CONSOLE=y # CONFIG_UNIX98_PTYS is not set @@ -629,6 +723,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set @@ -636,6 +735,8 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: @@ -644,16 +745,21 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -662,15 +768,16 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SSB=y CONFIG_SSB_SPROM=y +CONFIG_SSB_BLOCKIO=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y -# CONFIG_SSB_B43_PCI_BRIDGE is not set +CONFIG_SSB_B43_PCI_BRIDGE=y CONFIG_SSB_PCMCIAHOST_POSSIBLE=y # CONFIG_SSB_PCMCIAHOST is not set # CONFIG_SSB_SILENT is not set # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -# CONFIG_SSB_DRIVER_PCICORE is not set +CONFIG_SSB_DRIVER_PCICORE=y # CONFIG_SSB_DRIVER_MIPS is not set # @@ -680,27 +787,15 @@ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +# CONFIG_VGA_ARB is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -710,11 +805,7 @@ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y # # Display device support # -CONFIG_DISPLAY_SUPPORT=y - -# -# Display hardware drivers -# +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -741,13 +832,14 @@ CONFIG_USB=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set -CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_SSB is not set CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y @@ -796,7 +888,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -807,8 +898,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -819,7 +910,29 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LT3593 is not set +CONFIG_LEDS_TRIGGERS=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGER_TIMER=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y @@ -827,6 +940,10 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -838,12 +955,16 @@ CONFIG_RTC_LIB=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_FILE_LOCKING is not set +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -875,8 +996,6 @@ CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -888,6 +1007,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -898,7 +1018,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -906,7 +1025,46 @@ CONFIG_MISC_FILESYSTEMS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # @@ -918,29 +1076,23 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_EARLY_PRINTK=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200" # CONFIG_CMDLINE_OVERRIDE is not set @@ -951,8 +1103,108 @@ CONFIG_CMDLINE="console=ttyS0,115200" # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=y +# CONFIG_CRYPTO_HW is not set # CONFIG_BINARY_PRINTF is not set # diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h index ed9aaaaf0749..2d28017e95d0 100644 --- a/arch/mips/include/asm/cmpxchg.h +++ b/arch/mips/include/asm/cmpxchg.h @@ -16,7 +16,7 @@ ({ \ __typeof(*(m)) __ret; \ \ - if (kernel_uses_llsc && R10000_LLSC_WAR) { \ + if (kernel_uses_llsc && R10000_LLSC_WAR) { \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index 1cf7b1401ee4..fcdbe3a4ce1f 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -307,7 +307,7 @@ extern unsigned long _loongson_addrwincfg_base; */ #define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\ s##_WIN##w##_BASE = (src); \ - s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \ + s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \ s##_WIN##w##_MASK = ~(size-1); \ } while (0) diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index 26dc69d792a6..1be4b0fa30da 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -120,9 +120,14 @@ #endif #define FIRST_USER_ADDRESS 0UL -#define VMALLOC_START MAP_BASE +/* + * TLB refill handlers also map the vmalloc area into xuseg. Avoid + * the first couple of pages so NULL pointer dereferences will still + * reliably trap. + */ +#define VMALLOC_START (MAP_BASE + (2 * PAGE_SIZE)) #define VMALLOC_END \ - (VMALLOC_START + \ + (MAP_BASE + \ min(PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE, \ (1UL << cpu_vmbits)) - (1UL << 32)) diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index ce47118e52b7..cdc6a46efd98 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -142,9 +142,9 @@ extern int ptrace_set_watch_regs(struct task_struct *child, extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit); -extern NORET_TYPE void die(const char *, const struct pt_regs *) ATTRIB_NORET; +extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET; -static inline void die_if_kernel(const char *str, const struct pt_regs *regs) +static inline void die_if_kernel(const char *str, struct pt_regs *regs) { if (unlikely(!user_mode(regs))) die(str, regs); diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index c8419129e770..58730c5ce4bf 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -121,7 +121,7 @@ .endm #else .macro get_saved_sp /* Uniprocessor variation */ -#ifdef CONFIG_CPU_LOONGSON2F +#ifdef CONFIG_CPU_JUMP_WORKAROUNDS /* * Clear BTB (branch target buffer), forbid RAS (return address * stack) to workaround the Out-of-order Issue in Loongson2F diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h index 11a8b5252549..697e40c06497 100644 --- a/arch/mips/include/asm/uasm.h +++ b/arch/mips/include/asm/uasm.h @@ -167,6 +167,24 @@ static inline void __cpuinit uasm_l##lb(struct uasm_label **lab, u32 *addr) \ #define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1) #define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3) +static inline void uasm_i_dsrl_safe(u32 **p, unsigned int a1, + unsigned int a2, unsigned int a3) +{ + if (a3 < 32) + uasm_i_dsrl(p, a1, a2, a3); + else + uasm_i_dsrl32(p, a1, a2, a3 - 32); +} + +static inline void uasm_i_dsll_safe(u32 **p, unsigned int a1, + unsigned int a2, unsigned int a3) +{ + if (a3 < 32) + uasm_i_dsll(p, a1, a2, a3); + else + uasm_i_dsll32(p, a1, a2, a3 - 32); +} + /* Handle relocations. */ struct uasm_reloc { u32 *addr; diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c index 7043f6b9ff3c..0d0f054a02f4 100644 --- a/arch/mips/jazz/setup.c +++ b/arch/mips/jazz/setup.c @@ -76,15 +76,9 @@ void __init plat_mem_setup(void) #ifdef CONFIG_VT screen_info = (struct screen_info) { - 0, 0, /* orig-x, orig-y */ - 0, /* unused */ - 0, /* orig_video_page */ - 0, /* orig_video_mode */ - 160, /* orig_video_cols */ - 0, 0, 0, /* unused, ega_bx, unused */ - 64, /* orig_video_lines */ - 0, /* orig_video_isVGA */ - 16 /* orig_video_points */ + .orig_video_cols = 160, + .orig_video_lines = 64, + .orig_video_points = 16, }; #endif diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 1a4dd657ccb9..d612c6dcb746 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -352,9 +352,10 @@ void show_registers(const struct pt_regs *regs) static DEFINE_SPINLOCK(die_lock); -void __noreturn die(const char * str, const struct pt_regs * regs) +void __noreturn die(const char * str, struct pt_regs * regs) { static int die_counter; + int sig = SIGSEGV; #ifdef CONFIG_MIPS_MT_SMTC unsigned long dvpret = dvpe(); #endif /* CONFIG_MIPS_MT_SMTC */ @@ -365,6 +366,10 @@ void __noreturn die(const char * str, const struct pt_regs * regs) #ifdef CONFIG_MIPS_MT_SMTC mips_mt_regdump(dvpret); #endif /* CONFIG_MIPS_MT_SMTC */ + + if (notify_die(DIE_OOPS, str, regs, 0, current->thread.trap_no, SIGSEGV) == NOTIFY_STOP) + sig = 0; + printk("%s[#%d]:\n", str, ++die_counter); show_registers(regs); add_taint(TAINT_DIE); @@ -379,7 +384,7 @@ void __noreturn die(const char * str, const struct pt_regs * regs) panic("Fatal exception"); } - do_exit(SIGSEGV); + do_exit(sig); } extern struct exception_table_entry __start___dbe_table[]; @@ -1557,12 +1562,7 @@ static char panic_null_cerr[] __cpuinitdata = void __cpuinit set_uncached_handler(unsigned long offset, void *addr, unsigned long size) { -#ifdef CONFIG_32BIT - unsigned long uncached_ebase = KSEG1ADDR(ebase); -#endif -#ifdef CONFIG_64BIT - unsigned long uncached_ebase = TO_UNCAC(ebase); -#endif + unsigned long uncached_ebase = CKSEG1ADDR(ebase); if (!addr) panic(panic_null_cerr); diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c index 853f184b793e..81fbe6b73f91 100644 --- a/arch/mips/loongson/common/machtype.c +++ b/arch/mips/loongson/common/machtype.c @@ -24,7 +24,7 @@ static const char *system_types[] = { [MACH_LEMOTE_FL2F] "lemote-fuloong-2f-box", [MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches", [MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches", - [MACH_DEXXON_GDIUM2F10] "dexxon-gidum-2f-10inches", + [MACH_DEXXON_GDIUM2F10] "dexxon-gdium-2f", [MACH_LEMOTE_NAS] "lemote-nas-2f", [MACH_LEMOTE_LL2F] "lemote-lynloong-2f", [MACH_LOONGSON_END] NULL, diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c index ec2f7964a0b0..30eba6001205 100644 --- a/arch/mips/loongson/common/mem.c +++ b/arch/mips/loongson/common/mem.c @@ -75,7 +75,7 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, unsigned long end = offset + size; if (__uncached_access(file, offset)) { - if (((uca_start && offset) >= uca_start) && + if (uca_start && (offset >= uca_start) && (end <= uca_end)) return __pgprot((pgprot_val(vma_prot) & ~_CACHE_MASK) | @@ -96,7 +96,7 @@ static int __init find_vga_mem_init(void) return 0; for_each_pci_dev(dev) { - if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA) { + if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { r = &dev->resource[idx]; if (!r->start && r->end) diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c index 4bd9c18b07a5..9e10d6225d9b 100644 --- a/arch/mips/loongson/common/reset.c +++ b/arch/mips/loongson/common/reset.c @@ -16,13 +16,31 @@ #include +static inline void loongson_reboot(void) +{ +#ifndef CONFIG_CPU_JUMP_WORKAROUNDS + ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); +#else + void (*func)(void); + + func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4); + + __asm__ __volatile__( + " .set noat \n" + " jr %[func] \n" + " .set at \n" + : /* No outputs */ + : [func] "r" (func)); +#endif +} + static void loongson_restart(char *command) { /* do preparation for reboot */ mach_prepare_reboot(); /* reboot via jumping to boot base address */ - ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); + loongson_reboot(); } static void loongson_poweroff(void) diff --git a/arch/mips/loongson/common/setup.c b/arch/mips/loongson/common/setup.c index 4cd2aa9a342c..27d826bc7103 100644 --- a/arch/mips/loongson/common/setup.c +++ b/arch/mips/loongson/common/setup.c @@ -41,15 +41,12 @@ void __init plat_mem_setup(void) conswitchp = &vga_con; screen_info = (struct screen_info) { - 0, 25, /* orig-x, orig-y */ - 0, /* unused */ - 0, /* orig-video-page */ - 0, /* orig-video-mode */ - 80, /* orig-video-cols */ - 0, 0, 0, /* ega_ax, ega_bx, ega_cx */ - 25, /* orig-video-lines */ - VIDEO_TYPE_VGAC, /* orig-video-isVGA */ - 16 /* orig-video-points */ + .orig_x = 0, + .orig_y = 25, + .orig_video_cols = 80, + .orig_video_lines = 25, + .orig_video_isVGA = VIDEO_TYPE_VGAC, + .orig_video_points = 16, }; #elif defined(CONFIG_DUMMY_CONSOLE) conswitchp = &dummy_con; diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c index 882dfcd42c00..1d8b4d28a058 100644 --- a/arch/mips/loongson/lemote-2f/irq.c +++ b/arch/mips/loongson/lemote-2f/irq.c @@ -79,7 +79,7 @@ void mach_irq_dispatch(unsigned int pending) if (pending & CAUSEF_IP7) do_IRQ(LOONGSON_TIMER_IRQ); else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */ -#ifdef CONFIG_OPROFILE +#if defined(CONFIG_OPROFILE) || defined(CONFIG_OPROFILE_MODULE) do_IRQ(LOONGSON2_PERFCNT_IRQ); #endif bonito_irqdispatch(); diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index d1f68aadbc4c..86f004dc8355 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -31,6 +31,16 @@ #include #include +/* + * TLB load/store/modify handlers. + * + * Only the fastpath gets synthesized at runtime, the slowpath for + * do_page_fault remains normal asm. + */ +extern void tlb_do_page_fault_0(void); +extern void tlb_do_page_fault_1(void); + + static inline int r45k_bvahwbug(void) { /* XXX: We should probe for the presence of this bug, but we don't. */ @@ -83,6 +93,7 @@ enum label_id { label_nopage_tlbm, label_smp_pgtable_change, label_r3000_write_probe_fail, + label_large_segbits_fault, #ifdef CONFIG_HUGETLB_PAGE label_tlb_huge_update, #endif @@ -101,6 +112,7 @@ UASM_L_LA(_nopage_tlbs) UASM_L_LA(_nopage_tlbm) UASM_L_LA(_smp_pgtable_change) UASM_L_LA(_r3000_write_probe_fail) +UASM_L_LA(_large_segbits_fault) #ifdef CONFIG_HUGETLB_PAGE UASM_L_LA(_tlb_huge_update) #endif @@ -157,6 +169,10 @@ static u32 tlb_handler[128] __cpuinitdata; static struct uasm_label labels[128] __cpuinitdata; static struct uasm_reloc relocs[128] __cpuinitdata; +#ifdef CONFIG_64BIT +static int check_for_high_segbits __cpuinitdata; +#endif + #ifndef CONFIG_MIPS_PGD_C0_CONTEXT /* * CONFIG_MIPS_PGD_C0_CONTEXT implies 64 bit and lack of pgd_current, @@ -408,7 +424,7 @@ static __cpuinit __maybe_unused void build_convert_pte_to_entrylo(u32 **p, UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC)); } else { #ifdef CONFIG_64BIT_PHYS_ADDR - uasm_i_dsrl(p, reg, reg, ilog2(_PAGE_GLOBAL)); + uasm_i_dsrl_safe(p, reg, reg, ilog2(_PAGE_GLOBAL)); #else UASM_i_SRL(p, reg, reg, ilog2(_PAGE_GLOBAL)); #endif @@ -532,7 +548,24 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, * The vmalloc handling is not in the hotpath. */ uasm_i_dmfc0(p, tmp, C0_BADVADDR); - uasm_il_bltz(p, r, tmp, label_vmalloc); + + if (check_for_high_segbits) { + /* + * The kernel currently implicitely assumes that the + * MIPS SEGBITS parameter for the processor is + * (PGDIR_SHIFT+PGDIR_BITS) or less, and will never + * allocate virtual addresses outside the maximum + * range for SEGBITS = (PGDIR_SHIFT+PGDIR_BITS). But + * that doesn't prevent user code from accessing the + * higher xuseg addresses. Here, we make sure that + * everything but the lower xuseg addresses goes down + * the module_alloc/vmalloc path. + */ + uasm_i_dsrl_safe(p, ptr, tmp, PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3); + uasm_il_bnez(p, r, ptr, label_vmalloc); + } else { + uasm_il_bltz(p, r, tmp, label_vmalloc); + } /* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */ #ifdef CONFIG_MIPS_PGD_C0_CONTEXT @@ -549,14 +582,14 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, * SMTC uses TCBind value as "CPU" index */ uasm_i_mfc0(p, ptr, C0_TCBIND); - uasm_i_dsrl(p, ptr, ptr, 19); + uasm_i_dsrl_safe(p, ptr, ptr, 19); # else /* * 64 bit SMP running in XKPHYS has smp_processor_id() << 3 * stored in CONTEXT. */ uasm_i_dmfc0(p, ptr, C0_CONTEXT); - uasm_i_dsrl(p, ptr, ptr, 23); + uasm_i_dsrl_safe(p, ptr, ptr, 23); # endif UASM_i_LA_mostly(p, tmp, pgdc); uasm_i_daddu(p, ptr, ptr, tmp); @@ -569,44 +602,78 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, uasm_l_vmalloc_done(l, *p); - if (PGDIR_SHIFT - 3 < 32) /* get pgd offset in bytes */ - uasm_i_dsrl(p, tmp, tmp, PGDIR_SHIFT-3); - else - uasm_i_dsrl32(p, tmp, tmp, PGDIR_SHIFT - 3 - 32); + /* get pgd offset in bytes */ + uasm_i_dsrl_safe(p, tmp, tmp, PGDIR_SHIFT - 3); uasm_i_andi(p, tmp, tmp, (PTRS_PER_PGD - 1)<<3); uasm_i_daddu(p, ptr, ptr, tmp); /* add in pgd offset */ #ifndef __PAGETABLE_PMD_FOLDED uasm_i_dmfc0(p, tmp, C0_BADVADDR); /* get faulting address */ uasm_i_ld(p, ptr, 0, ptr); /* get pmd pointer */ - uasm_i_dsrl(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */ + uasm_i_dsrl_safe(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */ uasm_i_andi(p, tmp, tmp, (PTRS_PER_PMD - 1)<<3); uasm_i_daddu(p, ptr, ptr, tmp); /* add in pmd offset */ #endif } +enum vmalloc64_mode {not_refill, refill}; /* * BVADDR is the faulting address, PTR is scratch. * PTR will hold the pgd for vmalloc. */ static void __cpuinit build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, - unsigned int bvaddr, unsigned int ptr) + unsigned int bvaddr, unsigned int ptr, + enum vmalloc64_mode mode) { long swpd = (long)swapper_pg_dir; + int single_insn_swpd; + int did_vmalloc_branch = 0; + + single_insn_swpd = uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd); uasm_l_vmalloc(l, *p); - if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) { - uasm_il_b(p, r, label_vmalloc_done); - uasm_i_lui(p, ptr, uasm_rel_hi(swpd)); - } else { - UASM_i_LA_mostly(p, ptr, swpd); - uasm_il_b(p, r, label_vmalloc_done); - if (uasm_in_compat_space_p(swpd)) - uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd)); - else - uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd)); + if (mode == refill && check_for_high_segbits) { + if (single_insn_swpd) { + uasm_il_bltz(p, r, bvaddr, label_vmalloc_done); + uasm_i_lui(p, ptr, uasm_rel_hi(swpd)); + did_vmalloc_branch = 1; + /* fall through */ + } else { + uasm_il_bgez(p, r, bvaddr, label_large_segbits_fault); + } + } + if (!did_vmalloc_branch) { + if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) { + uasm_il_b(p, r, label_vmalloc_done); + uasm_i_lui(p, ptr, uasm_rel_hi(swpd)); + } else { + UASM_i_LA_mostly(p, ptr, swpd); + uasm_il_b(p, r, label_vmalloc_done); + if (uasm_in_compat_space_p(swpd)) + uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd)); + else + uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd)); + } + } + if (mode == refill && check_for_high_segbits) { + uasm_l_large_segbits_fault(l, *p); + /* + * We get here if we are an xsseg address, or if we are + * an xuseg address above (PGDIR_SHIFT+PGDIR_BITS) boundary. + * + * Ignoring xsseg (assume disabled so would generate + * (address errors?), the only remaining possibility + * is the upper xuseg addresses. On processors with + * TLB_SEGBITS <= PGDIR_SHIFT+PGDIR_BITS, these + * addresses would have taken an address error. We try + * to mimic that here by taking a load/istream page + * fault. + */ + UASM_i_LA(p, ptr, (unsigned long)tlb_do_page_fault_0); + uasm_i_jr(p, ptr); + uasm_i_nop(p); } } @@ -720,9 +787,9 @@ static void __cpuinit build_update_entries(u32 **p, unsigned int tmp, UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC)); } else { - uasm_i_dsrl(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */ + uasm_i_dsrl_safe(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */ UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ - uasm_i_dsrl(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */ + uasm_i_dsrl_safe(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */ } UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */ } else { @@ -793,9 +860,9 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) uasm_i_dmfc0(&p, K0, C0_BADVADDR); uasm_i_dmfc0(&p, K1, C0_ENTRYHI); uasm_i_xor(&p, K0, K0, K1); - uasm_i_dsrl32(&p, K1, K0, 62 - 32); - uasm_i_dsrl(&p, K0, K0, 12 + 1); - uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32); + uasm_i_dsrl_safe(&p, K1, K0, 62); + uasm_i_dsrl_safe(&p, K0, K0, 12 + 1); + uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits); uasm_i_or(&p, K0, K0, K1); uasm_il_bnez(&p, &r, K0, label_leave); /* No need for uasm_i_nop */ @@ -825,7 +892,7 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) #endif #ifdef CONFIG_64BIT - build_get_pgd_vmalloc64(&p, &l, &r, K0, K1); + build_get_pgd_vmalloc64(&p, &l, &r, K0, K1, refill); #endif /* @@ -934,15 +1001,6 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) dump_handler((u32 *)ebase, 64); } -/* - * TLB load/store/modify handlers. - * - * Only the fastpath gets synthesized at runtime, the slowpath for - * do_page_fault remains normal asm. - */ -extern void tlb_do_page_fault_0(void); -extern void tlb_do_page_fault_1(void); - /* * 128 instructions for the fastpath handler is generous and should * never be exceeded. @@ -1302,7 +1360,7 @@ build_r4000_tlbchange_handler_tail(u32 **p, struct uasm_label **l, uasm_i_eret(p); /* return from trap */ #ifdef CONFIG_64BIT - build_get_pgd_vmalloc64(p, l, r, tmp, ptr); + build_get_pgd_vmalloc64(p, l, r, tmp, ptr, not_refill); #endif } @@ -1322,9 +1380,9 @@ static void __cpuinit build_r4000_tlb_load_handler(void) uasm_i_dmfc0(&p, K0, C0_BADVADDR); uasm_i_dmfc0(&p, K1, C0_ENTRYHI); uasm_i_xor(&p, K0, K0, K1); - uasm_i_dsrl32(&p, K1, K0, 62 - 32); - uasm_i_dsrl(&p, K0, K0, 12 + 1); - uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32); + uasm_i_dsrl_safe(&p, K1, K0, 62); + uasm_i_dsrl_safe(&p, K0, K0, 12 + 1); + uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits); uasm_i_or(&p, K0, K0, K1); uasm_il_bnez(&p, &r, K0, label_leave); /* No need for uasm_i_nop */ @@ -1526,6 +1584,10 @@ void __cpuinit build_tlb_refill_handler(void) */ static int run_once = 0; +#ifdef CONFIG_64BIT + check_for_high_segbits = current_cpu_data.vmbits > (PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3); +#endif + switch (current_cpu_type()) { case CPU_R2000: case CPU_R3000: diff --git a/arch/mips/nxp/pnx8550/common/reset.c b/arch/mips/nxp/pnx8550/common/reset.c index 76bc3ec634ee..fadd8744a6bc 100644 --- a/arch/mips/nxp/pnx8550/common/reset.c +++ b/arch/mips/nxp/pnx8550/common/reset.c @@ -20,6 +20,8 @@ * Reset the PNX8550 board. * */ +#include + #include #include diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index ada24e6f951f..1711e8e101bc 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -37,6 +37,7 @@ #include #include #include +#include #include @@ -254,7 +255,7 @@ static int __init sb1250_pcibios_init(void) * XXX ehs: Should this happen in PCI Device mode? */ io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024); - sb1250_controller.io_map_base = io_map_base; + sb1250_controller.io_map_base = (unsigned long)io_map_base; set_io_port_base((unsigned long)io_map_base); #ifdef CONFIG_SIBYTE_HAS_LDT diff --git a/arch/mips/sgi-ip22/ip22-berr.c b/arch/mips/sgi-ip22/ip22-berr.c index de6a0cc32fea..911d3999c0c7 100644 --- a/arch/mips/sgi-ip22/ip22-berr.c +++ b/arch/mips/sgi-ip22/ip22-berr.c @@ -89,7 +89,7 @@ static void print_buserr(void) void ip22_be_interrupt(int irq) { const int field = 2 * sizeof(unsigned long); - const struct pt_regs *regs = get_irq_regs(); + struct pt_regs *regs = get_irq_regs(); save_and_clear_buserr(); print_buserr(); diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c index 30e12e2ec4b5..88c684e05a3d 100644 --- a/arch/mips/sgi-ip22/ip28-berr.c +++ b/arch/mips/sgi-ip22/ip28-berr.c @@ -453,7 +453,7 @@ mips_be_fatal: void ip22_be_interrupt(int irq) { - const struct pt_regs *regs = get_irq_regs(); + struct pt_regs *regs = get_irq_regs(); count_be_interrupt++; diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index 5277aac96b0f..c308989fc464 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -145,15 +145,14 @@ void __init plat_mem_setup(void) #ifdef CONFIG_VT screen_info = (struct screen_info) { - 0, 0, /* orig-x, orig-y */ - 0, /* unused */ - 52, /* orig_video_page */ - 3, /* orig_video_mode */ - 80, /* orig_video_cols */ - 4626, 3, 9, /* unused, ega_bx, unused */ - 25, /* orig_video_lines */ - 0x22, /* orig_video_isVGA */ - 16 /* orig_video_points */ + .orig_video_page = 52, + .orig_video_mode = 3, + .orig_video_cols = 80, + .flags = 12, + .orig_video_ega_bx = 3, + .orig_video_lines = 25, + .orig_video_isVGA = 0x22, + .orig_video_points = 16, }; /* XXXKW for CFE, get lines/cols from environment */ #endif diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig index fba1f62d56e7..dba024d72a89 100644 --- a/arch/sh/configs/rts7751r2d1_defconfig +++ b/arch/sh/configs/rts7751r2d1_defconfig @@ -877,7 +877,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=1 +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig index a8d538f06e67..6d511d06cbf6 100644 --- a/arch/sh/configs/rts7751r2dplus_defconfig +++ b/arch/sh/configs/rts7751r2dplus_defconfig @@ -963,7 +963,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=1 +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 17811e5d287b..f98141b3b7d7 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -17,6 +17,7 @@ #include #include "pci-sh4.h" #include +#include static int __init __area_sdram_check(struct pci_channel *chan, unsigned int area) @@ -47,8 +48,8 @@ static int __init __area_sdram_check(struct pci_channel *chan, static struct resource sh7751_pci_resources[] = { { .name = "SH7751_IO", - .start = SH7751_PCI_IO_BASE, - .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, + .start = 0x1000, + .end = SZ_4M - 1, .flags = IORESOURCE_IO }, { .name = "SH7751_mem", diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h index 55f9fec082d4..de2359533994 100644 --- a/arch/sh/include/cpu-sh4/cpu/dma-register.h +++ b/arch/sh/include/cpu-sh4/cpu/dma-register.h @@ -76,7 +76,7 @@ enum { } #define TS_INDEX2VAL(i) ((((i) & 3) << CHCR_TS_LOW_SHIFT) | \ - ((((i) >> 2) & 3) << CHCR_TS_HIGH_SHIFT)) + (((i) & 0xc) << CHCR_TS_HIGH_SHIFT)) #else /* CONFIG_CPU_SH4A */ diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index a1dcfa3ab17d..30a3e9776123 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -347,6 +347,7 @@ extern void __iomem *early_ioremap(resource_size_t phys_addr, extern void __iomem *early_memremap(resource_size_t phys_addr, unsigned long size); extern void early_iounmap(void __iomem *addr, unsigned long size); +extern void fixup_early_ioremap(void); #define IO_SPACE_LIMIT 0xffff diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 127b8718abfb..eb2789c3f721 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2545,6 +2545,9 @@ void irq_force_complete_move(int irq) struct irq_desc *desc = irq_to_desc(irq); struct irq_cfg *cfg = desc->chip_data; + if (!cfg) + return; + __irq_complete_move(&desc, cfg->vector); } #else diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index d360b56e9825..b6215b9798e2 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -929,7 +929,8 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, powernow_table[i].index = index; /* Frequency may be rounded for these */ - if (boot_cpu_data.x86 == 0x10 || boot_cpu_data.x86 == 0x11) { + if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10) + || boot_cpu_data.x86 == 0x11) { powernow_table[i].frequency = freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7); } else diff --git a/arch/x86/lib/rwsem_64.S b/arch/x86/lib/rwsem_64.S index 15acecf0d7aa..41fcf00e49df 100644 --- a/arch/x86/lib/rwsem_64.S +++ b/arch/x86/lib/rwsem_64.S @@ -60,7 +60,7 @@ ENTRY(call_rwsem_down_write_failed) ENDPROC(call_rwsem_down_write_failed) ENTRY(call_rwsem_wake) - decw %dx /* do nothing if still outstanding active readers */ + decl %edx /* do nothing if still outstanding active readers */ jnz 1f save_common_regs movq %rax,%rdi diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 5eb1ba74a3a9..12e4d2d3c110 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -448,6 +448,20 @@ static inline void __init early_clear_fixmap(enum fixed_addresses idx) static void __iomem *prev_map[FIX_BTMAPS_SLOTS] __initdata; static unsigned long prev_size[FIX_BTMAPS_SLOTS] __initdata; +void __init fixup_early_ioremap(void) +{ + int i; + + for (i = 0; i < FIX_BTMAPS_SLOTS; i++) { + if (prev_map[i]) { + WARN_ON(1); + break; + } + } + + early_ioremap_init(); +} + static int __init check_early_ioremap_leak(void) { int count = 0; diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c index 1a8faf09afed..792854003ed3 100644 --- a/arch/x86/mm/pgtable_32.c +++ b/arch/x86/mm/pgtable_32.c @@ -18,6 +18,7 @@ #include #include #include +#include unsigned int __VMALLOC_RESERVE = 128 << 20; @@ -128,6 +129,7 @@ static int __init parse_reservetop(char *arg) address = memparse(arg, &arg); reserve_top_address(address); + fixup_early_ioremap(); return 0; } early_param("reservetop", parse_reservetop); diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index 5fe03def34b2..2cc682b860ea 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -286,16 +286,16 @@ done: static struct cgroup_subsys_state * blkiocg_create(struct cgroup_subsys *subsys, struct cgroup *cgroup) { - struct blkio_cgroup *blkcg, *parent_blkcg; + struct blkio_cgroup *blkcg; + struct cgroup *parent = cgroup->parent; - if (!cgroup->parent) { + if (!parent) { blkcg = &blkio_root_cgroup; goto done; } /* Currently we do not support hierarchy deeper than two level (0,1) */ - parent_blkcg = cgroup_to_blkio_cgroup(cgroup->parent); - if (css_depth(&parent_blkcg->css) > 0) + if (parent != cgroup->top_cgroup) return ERR_PTR(-EINVAL); blkcg = kzalloc(sizeof(*blkcg), GFP_KERNEL); diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 838834be115b..5f127cfb2e92 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -3694,8 +3694,10 @@ static void *cfq_init_queue(struct request_queue *q) * to make sure that cfq_put_cfqg() does not try to kfree root group */ atomic_set(&cfqg->ref, 1); + rcu_read_lock(); blkiocg_add_blkio_group(&blkio_root_cgroup, &cfqg->blkg, (void *)cfqd, 0); + rcu_read_unlock(); #endif /* * Not strictly needed (since RB_ROOT just clears the node and we diff --git a/crypto/async_tx/async_raid6_recov.c b/crypto/async_tx/async_raid6_recov.c index 943f2abac9b4..ce038d861eb9 100644 --- a/crypto/async_tx/async_raid6_recov.c +++ b/crypto/async_tx/async_raid6_recov.c @@ -324,6 +324,7 @@ struct dma_async_tx_descriptor * async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb, struct page **blocks, struct async_submit_ctl *submit) { + void *scribble = submit->scribble; int non_zero_srcs, i; BUG_ON(faila == failb); @@ -332,11 +333,13 @@ async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb, pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes); - /* we need to preserve the contents of 'blocks' for the async - * case, so punt to synchronous if a scribble buffer is not available + /* if a dma resource is not available or a scribble buffer is not + * available punt to the synchronous path. In the 'dma not + * available' case be sure to use the scribble buffer to + * preserve the content of 'blocks' as the caller intended. */ - if (!submit->scribble) { - void **ptrs = (void **) blocks; + if (!async_dma_find_channel(DMA_PQ) || !scribble) { + void **ptrs = scribble ? scribble : (void **) blocks; async_tx_quiesce(&submit->depend_tx); for (i = 0; i < disks; i++) @@ -406,11 +409,13 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila, pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes); - /* we need to preserve the contents of 'blocks' for the async - * case, so punt to synchronous if a scribble buffer is not available + /* if a dma resource is not available or a scribble buffer is not + * available punt to the synchronous path. In the 'dma not + * available' case be sure to use the scribble buffer to + * preserve the content of 'blocks' as the caller intended. */ - if (!scribble) { - void **ptrs = (void **) blocks; + if (!async_dma_find_channel(DMA_PQ) || !scribble) { + void **ptrs = scribble ? scribble : (void **) blocks; async_tx_quiesce(&submit->depend_tx); for (i = 0; i < disks; i++) diff --git a/drivers/Makefile b/drivers/Makefile index 34f1e1064dbc..f42a03029b7c 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_SFI) += sfi/ obj-$(CONFIG_PNP) += pnp/ obj-$(CONFIG_ARM_AMBA) += amba/ +obj-$(CONFIG_VIRTIO) += virtio/ obj-$(CONFIG_XEN) += xen/ # regulators early, since some subsystems rely on them to initialize @@ -108,7 +109,6 @@ obj-$(CONFIG_PPC_PS3) += ps3/ obj-$(CONFIG_OF) += of/ obj-$(CONFIG_SSB) += ssb/ obj-$(CONFIG_VHOST_NET) += vhost/ -obj-$(CONFIG_VIRTIO) += virtio/ obj-$(CONFIG_VLYNQ) += vlynq/ obj-$(CONFIG_STAGING) += staging/ obj-y += platform/ diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c index 19dacfd43163..62122134693b 100644 --- a/drivers/acpi/acpi_pad.c +++ b/drivers/acpi/acpi_pad.c @@ -31,7 +31,7 @@ #include #include -#define ACPI_PROCESSOR_AGGREGATOR_CLASS "processor_aggregator" +#define ACPI_PROCESSOR_AGGREGATOR_CLASS "acpi_pad" #define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator" #define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80 static DEFINE_MUTEX(isolated_cpus_lock); diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 37132dc2da03..743576bf1bd7 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -527,7 +527,7 @@ int acpi_bus_generate_proc_event4(const char *device_class, const char *bus_id, if (!event_is_open) return 0; - event = kmalloc(sizeof(struct acpi_bus_event), GFP_ATOMIC); + event = kzalloc(sizeof(struct acpi_bus_event), GFP_ATOMIC); if (!event) return -ENOMEM; diff --git a/drivers/acpi/hest.c b/drivers/acpi/hest.c index 4bb18c980ac6..1c527a192872 100644 --- a/drivers/acpi/hest.c +++ b/drivers/acpi/hest.c @@ -123,6 +123,10 @@ int acpi_hest_firmware_first_pci(struct pci_dev *pci) { acpi_status status = AE_NOT_FOUND; struct acpi_table_header *hest = NULL; + + if (acpi_disabled) + return 0; + status = acpi_get_table(ACPI_SIG_HEST, 1, &hest); if (ACPI_SUCCESS(status)) { diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c index e8c32a49f14e..66f67293341e 100644 --- a/drivers/acpi/power_meter.c +++ b/drivers/acpi/power_meter.c @@ -35,7 +35,7 @@ #define ACPI_POWER_METER_NAME "power_meter" ACPI_MODULE_NAME(ACPI_POWER_METER_NAME); #define ACPI_POWER_METER_DEVICE_NAME "Power Meter" -#define ACPI_POWER_METER_CLASS "power_meter_resource" +#define ACPI_POWER_METER_CLASS "pwr_meter_resource" #define NUM_SENSORS 17 diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c index 36704b887ccf..f8be23b6c129 100644 --- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -18,7 +18,7 @@ #define PREFIX "ACPI: " -#define ACPI_SMB_HC_CLASS "smbus_host_controller" +#define ACPI_SMB_HC_CLASS "smbus_host_ctl" #define ACPI_SMB_HC_DEVICE_NAME "ACPI SMBus HC" struct acpi_smb_hc { diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index f74834a544fd..e2e992599e68 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -450,6 +450,126 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, }, { + .callback = init_set_sci_en_on_resume, + .ident = "Lenovo ThinkPad T410", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T410"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Lenovo ThinkPad T510", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T510"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Lenovo ThinkPad W510", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad W510"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Lenovo ThinkPad X201", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Lenovo ThinkPad X201", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Lenovo ThinkPad T410", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T410"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Lenovo ThinkPad T510", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T510"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Lenovo ThinkPad W510", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad W510"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Lenovo ThinkPad X201", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Lenovo ThinkPad X201", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Lenovo ThinkPad T410", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T410"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Lenovo ThinkPad T510", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T510"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Lenovo ThinkPad W510", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad W510"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Lenovo ThinkPad X201", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Lenovo ThinkPad X201", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"), + }, + }, + { .callback = init_old_suspend_ordering, .ident = "Panasonic CF51-2L", .matches = { @@ -458,6 +578,30 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"), }, }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Dell Studio 1558", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1558"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Dell Studio 1557", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1557"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Dell Studio 1555", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1555"), + }, + }, {}, }; #endif /* CONFIG_SUSPEND */ diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 4164dd244dd0..d94b8f0bd743 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -424,7 +424,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420), PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), - PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x3e520e17), + PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e), PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), @@ -446,7 +446,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), - PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x9351e59d), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47), PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918), diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c index 44bf6d11197e..d48a1dfd7b24 100644 --- a/drivers/block/drbd/drbd_worker.c +++ b/drivers/block/drbd/drbd_worker.c @@ -235,7 +235,7 @@ void drbd_endio_pri(struct bio *bio, int error) if (unlikely(error)) { what = (bio_data_dir(bio) == WRITE) ? write_completed_with_error - : (bio_rw(bio) == READA) + : (bio_rw(bio) == READ) ? read_completed_with_error : read_ahead_completed_with_error; } else diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index 1aea7157d8ff..f8e57c6303f2 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -100,7 +100,6 @@ struct menu_device { int needs_update; unsigned int expected_us; - unsigned int measured_us; u64 predicted_us; unsigned int exit_us; unsigned int bucket; @@ -187,14 +186,14 @@ static int menu_select(struct cpuidle_device *dev) int i; int multiplier; - data->last_state_idx = 0; - data->exit_us = 0; - if (data->needs_update) { menu_update(dev); data->needs_update = 0; } + data->last_state_idx = 0; + data->exit_us = 0; + /* Special case when user has set very strict latency requirement */ if (unlikely(latency_req == 0)) return 0; @@ -294,7 +293,7 @@ static void menu_update(struct cpuidle_device *dev) new_factor = data->correction_factor[data->bucket] * (DECAY - 1) / DECAY; - if (data->expected_us > 0 && data->measured_us < MAX_INTERESTING) + if (data->expected_us > 0 && measured_us < MAX_INTERESTING) new_factor += RESOLUTION * measured_us / data->expected_us; else /* diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 7cc31b3f40d8..6f25a20de99f 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -290,6 +290,7 @@ static int sh_dmae_alloc_chan_resources(struct dma_chan *chan) struct sh_dmae_chan *sh_chan = to_sh_chan(chan); struct sh_desc *desc; struct sh_dmae_slave *param = chan->private; + int ret; pm_runtime_get_sync(sh_chan->dev); @@ -301,11 +302,15 @@ static int sh_dmae_alloc_chan_resources(struct dma_chan *chan) struct sh_dmae_slave_config *cfg; cfg = sh_dmae_find_slave(sh_chan, param->slave_id); - if (!cfg) - return -EINVAL; + if (!cfg) { + ret = -EINVAL; + goto efindslave; + } - if (test_and_set_bit(param->slave_id, sh_dmae_slave_used)) - return -EBUSY; + if (test_and_set_bit(param->slave_id, sh_dmae_slave_used)) { + ret = -EBUSY; + goto etestused; + } param->config = cfg; @@ -334,10 +339,20 @@ static int sh_dmae_alloc_chan_resources(struct dma_chan *chan) } spin_unlock_bh(&sh_chan->desc_lock); - if (!sh_chan->descs_allocated) - pm_runtime_put(sh_chan->dev); + if (!sh_chan->descs_allocated) { + ret = -ENOMEM; + goto edescalloc; + } return sh_chan->descs_allocated; + +edescalloc: + if (param) + clear_bit(param->slave_id, sh_dmae_slave_used); +etestused: +efindslave: + pm_runtime_put(sh_chan->dev); + return ret; } /* diff --git a/drivers/dma/txx9dmac.c b/drivers/dma/txx9dmac.c index 3ebc61067e54..75fcf1ac8bb7 100644 --- a/drivers/dma/txx9dmac.c +++ b/drivers/dma/txx9dmac.c @@ -1359,3 +1359,5 @@ module_exit(txx9dmac_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("TXx9 DMA Controller driver"); MODULE_AUTHOR("Atsushi Nemoto "); +MODULE_ALIAS("platform:txx9dmac"); +MODULE_ALIAS("platform:txx9dmac-chan"); diff --git a/drivers/gpu/drm/drm_memory.c b/drivers/gpu/drm/drm_memory.c index e4865f99989c..7732268eced2 100644 --- a/drivers/gpu/drm/drm_memory.c +++ b/drivers/gpu/drm/drm_memory.c @@ -77,7 +77,7 @@ static void *agp_remap(unsigned long offset, unsigned long size, && (agpmem->bound + (agpmem->pages << PAGE_SHIFT)) >= (offset + size)) break; - if (!agpmem) + if (&agpmem->head == &dev->agp->memory) return NULL; /* diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c index 1a1825b29f5f..25bbd30ed7af 100644 --- a/drivers/gpu/drm/drm_sysfs.c +++ b/drivers/gpu/drm/drm_sysfs.c @@ -354,7 +354,10 @@ static struct bin_attribute edid_attr = { int drm_sysfs_connector_add(struct drm_connector *connector) { struct drm_device *dev = connector->dev; - int ret = 0, i, j; + int attr_cnt = 0; + int opt_cnt = 0; + int i; + int ret = 0; /* We shouldn't get called more than once for the same connector */ BUG_ON(device_is_registered(&connector->kdev)); @@ -377,8 +380,8 @@ int drm_sysfs_connector_add(struct drm_connector *connector) /* Standard attributes */ - for (i = 0; i < ARRAY_SIZE(connector_attrs); i++) { - ret = device_create_file(&connector->kdev, &connector_attrs[i]); + for (attr_cnt = 0; attr_cnt < ARRAY_SIZE(connector_attrs); attr_cnt++) { + ret = device_create_file(&connector->kdev, &connector_attrs[attr_cnt]); if (ret) goto err_out_files; } @@ -394,8 +397,8 @@ int drm_sysfs_connector_add(struct drm_connector *connector) case DRM_MODE_CONNECTOR_SVIDEO: case DRM_MODE_CONNECTOR_Component: case DRM_MODE_CONNECTOR_TV: - for (i = 0; i < ARRAY_SIZE(connector_attrs_opt1); i++) { - ret = device_create_file(&connector->kdev, &connector_attrs_opt1[i]); + for (opt_cnt = 0; opt_cnt < ARRAY_SIZE(connector_attrs_opt1); opt_cnt++) { + ret = device_create_file(&connector->kdev, &connector_attrs_opt1[opt_cnt]); if (ret) goto err_out_files; } @@ -414,10 +417,10 @@ int drm_sysfs_connector_add(struct drm_connector *connector) return 0; err_out_files: - if (i > 0) - for (j = 0; j < i; j++) - device_remove_file(&connector->kdev, - &connector_attrs[i]); + for (i = 0; i < opt_cnt; i++) + device_remove_file(&connector->kdev, &connector_attrs_opt1[i]); + for (i = 0; i < attr_cnt; i++) + device_remove_file(&connector->kdev, &connector_attrs[i]); device_unregister(&connector->kdev); out: diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 6732b5dd8ff4..27e2c715be11 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -2912,7 +2912,7 @@ typedef struct _ATOM_ANALOG_TV_INFO_V1_2 UCHAR ucTV_BootUpDefaultStandard; UCHAR ucExt_TV_ASIC_ID; UCHAR ucExt_TV_ASIC_SlaveAddr; - ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING]; + ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING_V1_2]; }ATOM_ANALOG_TV_INFO_V1_2; typedef struct _ATOM_DPCD_INFO diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index d7388fdb6d0b..cf60c0b3ef15 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2975,7 +2975,7 @@ int r100_cs_track_check(struct radeon_device *rdev, struct r100_cs_track *track) for (i = 0; i < track->num_cb; i++) { if (track->cb[i].robj == NULL) { - if (!(track->fastfill || track->color_channel_mask || + if (!(track->zb_cb_clear || track->color_channel_mask || track->blend_read_enable)) { continue; } diff --git a/drivers/gpu/drm/radeon/r100_track.h b/drivers/gpu/drm/radeon/r100_track.h index fadfe68de9cc..f47cdca1c004 100644 --- a/drivers/gpu/drm/radeon/r100_track.h +++ b/drivers/gpu/drm/radeon/r100_track.h @@ -75,7 +75,7 @@ struct r100_cs_track { struct r100_cs_track_texture textures[R300_TRACK_MAX_TEXTURE]; bool z_enabled; bool separate_cube; - bool fastfill; + bool zb_cb_clear; bool blend_read_enable; }; diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index eaf1f6bc44f1..a5ff8076b423 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -1044,7 +1044,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p, break; case 0x4d1c: /* ZB_BW_CNTL */ - track->fastfill = !!(idx_value & (1 << 2)); + track->zb_cb_clear = !!(idx_value & (1 << 5)); break; case 0x4e04: /* RB3D_BLENDCNTL */ diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c index c4457791dff1..28e473f1f56f 100644 --- a/drivers/gpu/drm/radeon/radeon_agp.c +++ b/drivers/gpu/drm/radeon/radeon_agp.c @@ -134,12 +134,10 @@ int radeon_agp_init(struct radeon_device *rdev) int ret; /* Acquire AGP. */ - if (!rdev->ddev->agp->acquired) { - ret = drm_agp_acquire(rdev->ddev); - if (ret) { - DRM_ERROR("Unable to acquire AGP: %d\n", ret); - return ret; - } + ret = drm_agp_acquire(rdev->ddev); + if (ret) { + DRM_ERROR("Unable to acquire AGP: %d\n", ret); + return ret; } ret = drm_agp_info(rdev->ddev, &info); diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 5673665ff216..9916d825401c 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1264,7 +1264,7 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, switch (crev) { case 1: tv_info = (ATOM_ANALOG_TV_INFO *)(mode_info->atom_context->bios + data_offset); - if (index > MAX_SUPPORTED_TV_TIMING) + if (index >= MAX_SUPPORTED_TV_TIMING) return false; mode->crtc_htotal = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Total); @@ -1302,7 +1302,7 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, break; case 2: tv_info_v1_2 = (ATOM_ANALOG_TV_INFO_V1_2 *)(mode_info->atom_context->bios + data_offset); - if (index > MAX_SUPPORTED_TV_TIMING_V1_2) + if (index >= MAX_SUPPORTED_TV_TIMING_V1_2) return false; dtd_timings = &tv_info_v1_2->aModeTimings[index]; diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 1331351c5178..4559a53d5e57 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -1316,6 +1316,8 @@ radeon_add_legacy_connector(struct drm_device *dev, radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI"); if (!radeon_connector->ddc_bus) goto failed; + } + if (connector_type == DRM_MODE_CONNECTOR_DVII) { radeon_connector->dac_load_detect = true; drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.load_detect_property, diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 4b05563d99e1..b3749d47be7b 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -216,6 +216,7 @@ static struct drm_driver driver_old = { .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, + .read = drm_read, #ifdef CONFIG_COMPAT .compat_ioctl = radeon_compat_ioctl, #endif @@ -304,6 +305,7 @@ static struct drm_driver kms_driver = { .mmap = radeon_mmap, .poll = drm_poll, .fasync = drm_fasync, + .read = drm_read, #ifdef CONFIG_COMPAT .compat_ioctl = radeon_kms_compat_ioctl, #endif diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index fed7b8084779..c5ddaf58563a 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -254,6 +254,53 @@ radeon_get_atom_connector_priv_from_encoder(struct drm_encoder *encoder) return dig_connector; } +void radeon_panel_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *adjusted_mode) +{ + struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_device *dev = encoder->dev; + struct radeon_device *rdev = dev->dev_private; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; + unsigned hblank = native_mode->htotal - native_mode->hdisplay; + unsigned vblank = native_mode->vtotal - native_mode->vdisplay; + unsigned hover = native_mode->hsync_start - native_mode->hdisplay; + unsigned vover = native_mode->vsync_start - native_mode->vdisplay; + unsigned hsync_width = native_mode->hsync_end - native_mode->hsync_start; + unsigned vsync_width = native_mode->vsync_end - native_mode->vsync_start; + + adjusted_mode->clock = native_mode->clock; + adjusted_mode->flags = native_mode->flags; + + if (ASIC_IS_AVIVO(rdev)) { + adjusted_mode->hdisplay = native_mode->hdisplay; + adjusted_mode->vdisplay = native_mode->vdisplay; + } + + adjusted_mode->htotal = native_mode->hdisplay + hblank; + adjusted_mode->hsync_start = native_mode->hdisplay + hover; + adjusted_mode->hsync_end = adjusted_mode->hsync_start + hsync_width; + + adjusted_mode->vtotal = native_mode->vdisplay + vblank; + adjusted_mode->vsync_start = native_mode->vdisplay + vover; + adjusted_mode->vsync_end = adjusted_mode->vsync_start + vsync_width; + + drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); + + if (ASIC_IS_AVIVO(rdev)) { + adjusted_mode->crtc_hdisplay = native_mode->hdisplay; + adjusted_mode->crtc_vdisplay = native_mode->vdisplay; + } + + adjusted_mode->crtc_htotal = adjusted_mode->crtc_hdisplay + hblank; + adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hdisplay + hover; + adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + hsync_width; + + adjusted_mode->crtc_vtotal = adjusted_mode->crtc_vdisplay + vblank; + adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + vover; + adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + vsync_width; + +} + static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) @@ -275,18 +322,8 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2; /* get the native mode for LVDS */ - if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT)) { - struct drm_display_mode *native_mode = &radeon_encoder->native_mode; - int mode_id = adjusted_mode->base.id; - *adjusted_mode = *native_mode; - if (!ASIC_IS_AVIVO(rdev)) { - adjusted_mode->hdisplay = mode->hdisplay; - adjusted_mode->vdisplay = mode->vdisplay; - adjusted_mode->crtc_hdisplay = mode->hdisplay; - adjusted_mode->crtc_vdisplay = mode->vdisplay; - } - adjusted_mode->base.id = mode_id; - } + if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT)) + radeon_panel_mode_fixup(encoder, adjusted_mode); /* get the native mode for TV */ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) { diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 2441cca7d775..0274abe17ad9 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -228,16 +228,8 @@ static bool radeon_legacy_mode_fixup(struct drm_encoder *encoder, drm_mode_set_crtcinfo(adjusted_mode, 0); /* get the native mode for LVDS */ - if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT)) { - struct drm_display_mode *native_mode = &radeon_encoder->native_mode; - int mode_id = adjusted_mode->base.id; - *adjusted_mode = *native_mode; - adjusted_mode->hdisplay = mode->hdisplay; - adjusted_mode->vdisplay = mode->vdisplay; - adjusted_mode->crtc_hdisplay = mode->hdisplay; - adjusted_mode->crtc_vdisplay = mode->vdisplay; - adjusted_mode->base.id = mode_id; - } + if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT)) + radeon_panel_mode_fixup(encoder, adjusted_mode); return true; } diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 0b8e32776b10..5413fcd63086 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -558,6 +558,8 @@ extern int radeon_static_clocks_init(struct drm_device *dev); bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); +void radeon_panel_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *adjusted_mode); void atom_rv515_force_tv_scaler(struct radeon_device *rdev, struct radeon_crtc *radeon_crtc); /* legacy tv */ diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index dd47b2a9a791..0e3754a3a303 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -1716,40 +1716,12 @@ int ttm_bo_wait(struct ttm_buffer_object *bo, } EXPORT_SYMBOL(ttm_bo_wait); -void ttm_bo_unblock_reservation(struct ttm_buffer_object *bo) -{ - atomic_set(&bo->reserved, 0); - wake_up_all(&bo->event_queue); -} - -int ttm_bo_block_reservation(struct ttm_buffer_object *bo, bool interruptible, - bool no_wait) -{ - int ret; - - while (unlikely(atomic_cmpxchg(&bo->reserved, 0, 1) != 0)) { - if (no_wait) - return -EBUSY; - else if (interruptible) { - ret = wait_event_interruptible - (bo->event_queue, atomic_read(&bo->reserved) == 0); - if (unlikely(ret != 0)) - return ret; - } else { - wait_event(bo->event_queue, - atomic_read(&bo->reserved) == 0); - } - } - return 0; -} - int ttm_bo_synccpu_write_grab(struct ttm_buffer_object *bo, bool no_wait) { int ret = 0; /* - * Using ttm_bo_reserve instead of ttm_bo_block_reservation - * makes sure the lru lists are updated. + * Using ttm_bo_reserve makes sure the lru lists are updated. */ ret = ttm_bo_reserve(bo, true, no_wait, false, 0); diff --git a/drivers/gpu/drm/ttm/ttm_lock.c b/drivers/gpu/drm/ttm/ttm_lock.c index 3d172ef04ee1..de41e55a944a 100644 --- a/drivers/gpu/drm/ttm/ttm_lock.c +++ b/drivers/gpu/drm/ttm/ttm_lock.c @@ -204,7 +204,6 @@ static int __ttm_vt_unlock(struct ttm_lock *lock) lock->flags &= ~TTM_VT_LOCK; wake_up_all(&lock->queue); spin_unlock(&lock->lock); - printk(KERN_INFO TTM_PFX "vt unlock.\n"); return ret; } @@ -265,10 +264,8 @@ int ttm_vt_lock(struct ttm_lock *lock, ttm_lock_type, &ttm_vt_lock_remove, NULL); if (ret) (void)__ttm_vt_unlock(lock); - else { + else lock->vt_holder = tfile; - printk(KERN_INFO TTM_PFX "vt lock.\n"); - } return ret; } diff --git a/drivers/gpu/drm/via/via_video.c b/drivers/gpu/drm/via/via_video.c index 6ec04ac12459..6efac8117c93 100644 --- a/drivers/gpu/drm/via/via_video.c +++ b/drivers/gpu/drm/via/via_video.c @@ -75,7 +75,7 @@ int via_decoder_futex(struct drm_device *dev, void *data, struct drm_file *file_ DRM_DEBUG("\n"); - if (fx->lock > VIA_NR_XVMC_LOCKS) + if (fx->lock >= VIA_NR_XVMC_LOCKS) return -EFAULT; lock = (volatile int *)XVMCLOCKPTR(sAPriv, fx->lock); diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index d6d1149d525d..c8768f38511e 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -276,8 +276,10 @@ vga_switcheroo_debugfs_write(struct file *filp, const char __user *ubuf, mutex_lock(&vgasr_mutex); - if (!vgasr_priv.active) - return -EINVAL; + if (!vgasr_priv.active) { + cnt = -EINVAL; + goto out; + } /* pwr off the device not in use */ if (strncmp(usercmd, "OFF", 3) == 0) { diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c index a2481f40ea1c..0e9f85d0a835 100644 --- a/drivers/i2c/busses/i2c-octeon.c +++ b/drivers/i2c/busses/i2c-octeon.c @@ -447,7 +447,7 @@ static struct i2c_adapter octeon_i2c_ops = { /** * octeon_i2c_setclock - Calculate and set clock divisors. */ -static int __init octeon_i2c_setclock(struct octeon_i2c *i2c) +static int __devinit octeon_i2c_setclock(struct octeon_i2c *i2c) { int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff; int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000; @@ -490,7 +490,7 @@ static int __init octeon_i2c_setclock(struct octeon_i2c *i2c) return 0; } -static int __init octeon_i2c_initlowlevel(struct octeon_i2c *i2c) +static int __devinit octeon_i2c_initlowlevel(struct octeon_i2c *i2c) { u8 status; int tries; diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 3202a86f420e..c2258a51fe0c 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -40,12 +40,11 @@ #include "i2c-core.h" -/* core_lock protects i2c_adapter_idr, userspace_devices, and guarantees +/* core_lock protects i2c_adapter_idr, and guarantees that device detection, deletion of detected devices, and attach_adapter and detach_adapter calls are serialized */ static DEFINE_MUTEX(core_lock); static DEFINE_IDR(i2c_adapter_idr); -static LIST_HEAD(userspace_devices); static struct device_type i2c_client_type; static int i2c_check_addr(struct i2c_adapter *adapter, int addr); @@ -117,8 +116,10 @@ static int i2c_device_probe(struct device *dev) dev_dbg(dev, "probe\n"); status = driver->probe(client, i2c_match_id(driver->id_table, client)); - if (status) + if (status) { client->driver = NULL; + i2c_set_clientdata(client, NULL); + } return status; } @@ -139,8 +140,10 @@ static int i2c_device_remove(struct device *dev) dev->driver = NULL; status = 0; } - if (status == 0) + if (status == 0) { client->driver = NULL; + i2c_set_clientdata(client, NULL); + } return status; } @@ -538,9 +541,9 @@ i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr, return -EEXIST; /* Keep track of the added device */ - mutex_lock(&core_lock); - list_add_tail(&client->detected, &userspace_devices); - mutex_unlock(&core_lock); + i2c_lock_adapter(adap); + list_add_tail(&client->detected, &adap->userspace_clients); + i2c_unlock_adapter(adap); dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device", info.type, info.addr); @@ -579,9 +582,10 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr, /* Make sure the device was added through sysfs */ res = -ENOENT; - mutex_lock(&core_lock); - list_for_each_entry_safe(client, next, &userspace_devices, detected) { - if (client->addr == addr && client->adapter == adap) { + i2c_lock_adapter(adap); + list_for_each_entry_safe(client, next, &adap->userspace_clients, + detected) { + if (client->addr == addr) { dev_info(dev, "%s: Deleting device %s at 0x%02hx\n", "delete_device", client->name, client->addr); @@ -591,7 +595,7 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr, break; } } - mutex_unlock(&core_lock); + i2c_unlock_adapter(adap); if (res < 0) dev_err(dev, "%s: Can't find device in list\n", @@ -673,6 +677,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap) } rt_mutex_init(&adap->bus_lock); + INIT_LIST_HEAD(&adap->userspace_clients); /* Set default timeout to 1 second if not already set */ if (adap->timeout == 0) @@ -875,14 +880,15 @@ int i2c_del_adapter(struct i2c_adapter *adap) return res; /* Remove devices instantiated from sysfs */ - list_for_each_entry_safe(client, next, &userspace_devices, detected) { - if (client->adapter == adap) { - dev_dbg(&adap->dev, "Removing %s at 0x%x\n", - client->name, client->addr); - list_del(&client->detected); - i2c_unregister_device(client); - } + i2c_lock_adapter(adap); + list_for_each_entry_safe(client, next, &adap->userspace_clients, + detected) { + dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name, + client->addr); + list_del(&client->detected); + i2c_unregister_device(client); } + i2c_unlock_adapter(adap); /* Detach any active clients. This can't fail, thus we do not checking the returned value. */ @@ -1260,12 +1266,23 @@ static int i2c_detect_address(struct i2c_client *temp_client, return 0; /* Make sure there is something at this address */ - if (i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) < 0) - return 0; + if (addr == 0x73 && (adapter->class & I2C_CLASS_HWMON)) { + /* Special probe for FSC hwmon chips */ + union i2c_smbus_data dummy; - /* Prevent 24RF08 corruption */ - if ((addr & ~0x0f) == 0x50) - i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL); + if (i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_READ, 0, + I2C_SMBUS_BYTE_DATA, &dummy) < 0) + return 0; + } else { + if (i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_WRITE, 0, + I2C_SMBUS_QUICK, NULL) < 0) + return 0; + + /* Prevent 24RF08 corruption */ + if ((addr & ~0x0f) == 0x50) + i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_WRITE, 0, + I2C_SMBUS_QUICK, NULL); + } /* Finally call the custom detection function */ memset(&info, 0, sizeof(struct i2c_board_info)); diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index defce2877eef..b85450865ff0 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -409,7 +409,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420), PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), - PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x3e520e17), + PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e), PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), @@ -431,7 +431,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), - PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x9351e59d), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47), PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918), diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index c52bec4d0530..423e0e6031ab 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -929,6 +929,24 @@ static const struct input_device_id joydev_ids[] = { .evbit = { BIT_MASK(EV_ABS) }, .absbit = { BIT_MASK(ABS_THROTTLE) }, }, + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | + INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = {[BIT_WORD(BTN_JOYSTICK)] = BIT_MASK(BTN_JOYSTICK) }, + }, + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | + INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(BTN_GAMEPAD)] = BIT_MASK(BTN_GAMEPAD) }, + }, + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | + INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(BTN_TRIGGER_HAPPY)] = BIT_MASK(BTN_TRIGGER_HAPPY) }, + }, { } /* Terminating entry */ }; diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 64c102355f53..a8293388d019 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -143,19 +143,6 @@ config KEYBOARD_BFIN To compile this driver as a module, choose M here: the module will be called bf54x-keys. -config KEYBOARD_CORGI - tristate "Corgi keyboard (deprecated)" - depends on PXA_SHARPSL - help - Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx - series of PDAs. - - This driver is now deprecated, use generic GPIO based matrix - keyboard driver instead. - - To compile this driver as a module, choose M here: the - module will be called corgikbd. - config KEYBOARD_LKKBD tristate "DECstation/VAXstation LK201/LK401 keyboard" select SERIO @@ -339,19 +326,6 @@ config KEYBOARD_PXA930_ROTARY To compile this driver as a module, choose M here: the module will be called pxa930_rotary. -config KEYBOARD_SPITZ - tristate "Spitz keyboard (deprecated)" - depends on PXA_SHARPSL - help - Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, - SL-C3000 and Sl-C3100 series of PDAs. - - This driver is now deprecated, use generic GPIO based matrix - keyboard driver instead. - - To compile this driver as a module, choose M here: the - module will be called spitzkbd. - config KEYBOARD_STOWAWAY tristate "Stowaway keyboard" select SERIO @@ -414,28 +388,6 @@ config KEYBOARD_TWL4030 To compile this driver as a module, choose M here: the module will be called twl4030_keypad. -config KEYBOARD_TOSA - tristate "Tosa keyboard (deprecated)" - depends on MACH_TOSA - help - Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) - - This driver is now deprecated, use generic GPIO based matrix - keyboard driver instead. - - To compile this driver as a module, choose M here: the - module will be called tosakbd. - -config KEYBOARD_TOSA_USE_EXT_KEYCODES - bool "Tosa keyboard: use extended keycodes" - depends on KEYBOARD_TOSA - help - Say Y here to enable the tosa keyboard driver to generate extended - (>= 127) keycodes. Be aware, that they can't be correctly interpreted - by either console keyboard driver or by Kdrive keybd driver. - - Say Y only if you know, what you are doing! - config KEYBOARD_XTKBD tristate "XT keyboard" select SERIO diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 706c6b5ed5f4..9a74127e4d17 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o -obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o @@ -33,10 +32,8 @@ obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o -obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o -obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c deleted file mode 100644 index 634af6a8e6b3..000000000000 --- a/drivers/input/keyboard/corgikbd.c +++ /dev/null @@ -1,414 +0,0 @@ -/* - * Keyboard driver for Sharp Corgi models (SL-C7xx) - * - * Copyright (c) 2004-2005 Richard Purdie - * - * Based on xtkbd.c/locomkbd.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define KB_ROWS 8 -#define KB_COLS 12 -#define KB_ROWMASK(r) (1 << (r)) -#define SCANCODE(r,c) ( ((r)<<4) + (c) + 1 ) -/* zero code, 124 scancodes */ -#define NR_SCANCODES ( SCANCODE(KB_ROWS-1,KB_COLS-1) +1 +1 ) - -#define SCAN_INTERVAL (50) /* ms */ -#define HINGE_SCAN_INTERVAL (250) /* ms */ - -#define CORGI_KEY_CALENDER KEY_F1 -#define CORGI_KEY_ADDRESS KEY_F2 -#define CORGI_KEY_FN KEY_F3 -#define CORGI_KEY_CANCEL KEY_F4 -#define CORGI_KEY_OFF KEY_SUSPEND -#define CORGI_KEY_EXOK KEY_F5 -#define CORGI_KEY_EXCANCEL KEY_F6 -#define CORGI_KEY_EXJOGDOWN KEY_F7 -#define CORGI_KEY_EXJOGUP KEY_F8 -#define CORGI_KEY_JAP1 KEY_LEFTCTRL -#define CORGI_KEY_JAP2 KEY_LEFTALT -#define CORGI_KEY_MAIL KEY_F10 -#define CORGI_KEY_OK KEY_F11 -#define CORGI_KEY_MENU KEY_F12 - -static unsigned char corgikbd_keycode[NR_SCANCODES] = { - 0, /* 0 */ - 0, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, 0, 0, 0, 0, 0, 0, 0, /* 1-16 */ - 0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, 0, 0, 0, 0, 0, 0, 0, /* 17-32 */ - KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0, /* 33-48 */ - CORGI_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, /* 49-64 */ - CORGI_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, 0, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, /* 65-80 */ - CORGI_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, 0, CORGI_KEY_FN, 0, 0, 0, 0, /* 81-96 */ - KEY_SYSRQ, CORGI_KEY_JAP1, CORGI_KEY_JAP2, CORGI_KEY_CANCEL, CORGI_KEY_OK, CORGI_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0, /* 97-112 */ - CORGI_KEY_OFF, CORGI_KEY_EXOK, CORGI_KEY_EXCANCEL, CORGI_KEY_EXJOGDOWN, CORGI_KEY_EXJOGUP, 0, 0, 0, 0, 0, 0, 0, /* 113-124 */ -}; - - -struct corgikbd { - unsigned char keycode[ARRAY_SIZE(corgikbd_keycode)]; - struct input_dev *input; - - spinlock_t lock; - struct timer_list timer; - struct timer_list htimer; - - unsigned int suspended; - unsigned long suspend_jiffies; -}; - -#define KB_DISCHARGE_DELAY 10 -#define KB_ACTIVATE_DELAY 10 - -/* Helper functions for reading the keyboard matrix - * Note: We should really be using the generic gpio functions to alter - * GPDR but it requires a function call per GPIO bit which is - * excessive when we need to access 12 bits at once, multiple times. - * These functions must be called within local_irq_save()/local_irq_restore() - * or similar. - */ -static inline void corgikbd_discharge_all(void) -{ - /* STROBE All HiZ */ - GPCR2 = CORGI_GPIO_ALL_STROBE_BIT; - GPDR2 &= ~CORGI_GPIO_ALL_STROBE_BIT; -} - -static inline void corgikbd_activate_all(void) -{ - /* STROBE ALL -> High */ - GPSR2 = CORGI_GPIO_ALL_STROBE_BIT; - GPDR2 |= CORGI_GPIO_ALL_STROBE_BIT; - - udelay(KB_DISCHARGE_DELAY); - - /* Clear any interrupts we may have triggered when altering the GPIO lines */ - GEDR1 = CORGI_GPIO_HIGH_SENSE_BIT; - GEDR2 = CORGI_GPIO_LOW_SENSE_BIT; -} - -static inline void corgikbd_activate_col(int col) -{ - /* STROBE col -> High, not col -> HiZ */ - GPSR2 = CORGI_GPIO_STROBE_BIT(col); - GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col); -} - -static inline void corgikbd_reset_col(int col) -{ - /* STROBE col -> Low */ - GPCR2 = CORGI_GPIO_STROBE_BIT(col); - /* STROBE col -> out, not col -> HiZ */ - GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col); -} - -#define GET_ROWS_STATUS(c) (((GPLR1 & CORGI_GPIO_HIGH_SENSE_BIT) >> CORGI_GPIO_HIGH_SENSE_RSHIFT) | ((GPLR2 & CORGI_GPIO_LOW_SENSE_BIT) << CORGI_GPIO_LOW_SENSE_LSHIFT)) - -/* - * The corgi keyboard only generates interrupts when a key is pressed. - * When a key is pressed, we enable a timer which then scans the - * keyboard to detect when the key is released. - */ - -/* Scan the hardware keyboard and push any changes up through the input layer */ -static void corgikbd_scankeyboard(struct corgikbd *corgikbd_data) -{ - unsigned int row, col, rowd; - unsigned long flags; - unsigned int num_pressed; - - if (corgikbd_data->suspended) - return; - - spin_lock_irqsave(&corgikbd_data->lock, flags); - - num_pressed = 0; - for (col = 0; col < KB_COLS; col++) { - /* - * Discharge the output driver capacitatance - * in the keyboard matrix. (Yes it is significant..) - */ - - corgikbd_discharge_all(); - udelay(KB_DISCHARGE_DELAY); - - corgikbd_activate_col(col); - udelay(KB_ACTIVATE_DELAY); - - rowd = GET_ROWS_STATUS(col); - for (row = 0; row < KB_ROWS; row++) { - unsigned int scancode, pressed; - - scancode = SCANCODE(row, col); - pressed = rowd & KB_ROWMASK(row); - - input_report_key(corgikbd_data->input, corgikbd_data->keycode[scancode], pressed); - - if (pressed) - num_pressed++; - - if (pressed && (corgikbd_data->keycode[scancode] == CORGI_KEY_OFF) - && time_after(jiffies, corgikbd_data->suspend_jiffies + HZ)) { - input_event(corgikbd_data->input, EV_PWR, CORGI_KEY_OFF, 1); - corgikbd_data->suspend_jiffies=jiffies; - } - } - corgikbd_reset_col(col); - } - - corgikbd_activate_all(); - - input_sync(corgikbd_data->input); - - /* if any keys are pressed, enable the timer */ - if (num_pressed) - mod_timer(&corgikbd_data->timer, jiffies + msecs_to_jiffies(SCAN_INTERVAL)); - - spin_unlock_irqrestore(&corgikbd_data->lock, flags); -} - -/* - * corgi keyboard interrupt handler. - */ -static irqreturn_t corgikbd_interrupt(int irq, void *dev_id) -{ - struct corgikbd *corgikbd_data = dev_id; - - if (!timer_pending(&corgikbd_data->timer)) { - /** wait chattering delay **/ - udelay(20); - corgikbd_scankeyboard(corgikbd_data); - } - - return IRQ_HANDLED; -} - -/* - * corgi timer checking for released keys - */ -static void corgikbd_timer_callback(unsigned long data) -{ - struct corgikbd *corgikbd_data = (struct corgikbd *) data; - corgikbd_scankeyboard(corgikbd_data); -} - -/* - * The hinge switches generate no interrupt so they need to be - * monitored by a timer. - * - * We debounce the switches and pass them to the input system. - * - * gprr == 0x00 - Keyboard with Landscape Screen - * 0x08 - No Keyboard with Portrait Screen - * 0x0c - Keyboard and Screen Closed - */ - -#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x)) -#define HINGE_STABLE_COUNT 2 -static int sharpsl_hinge_state; -static int hinge_count; - -static void corgikbd_hinge_timer(unsigned long data) -{ - struct corgikbd *corgikbd_data = (struct corgikbd *) data; - unsigned long gprr; - unsigned long flags; - - gprr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_GPRR) & (CORGI_SCP_SWA | CORGI_SCP_SWB); - gprr |= (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0); - if (gprr != sharpsl_hinge_state) { - hinge_count = 0; - sharpsl_hinge_state = gprr; - } else if (hinge_count < HINGE_STABLE_COUNT) { - hinge_count++; - if (hinge_count >= HINGE_STABLE_COUNT) { - spin_lock_irqsave(&corgikbd_data->lock, flags); - - input_report_switch(corgikbd_data->input, SW_LID, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0)); - input_report_switch(corgikbd_data->input, SW_TABLET_MODE, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0)); - input_report_switch(corgikbd_data->input, SW_HEADPHONE_INSERT, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0)); - input_sync(corgikbd_data->input); - - spin_unlock_irqrestore(&corgikbd_data->lock, flags); - } - } - mod_timer(&corgikbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL)); -} - -#ifdef CONFIG_PM -static int corgikbd_suspend(struct platform_device *dev, pm_message_t state) -{ - int i; - struct corgikbd *corgikbd = platform_get_drvdata(dev); - - corgikbd->suspended = 1; - /* strobe 0 is the power key so this can't be made an input for - powersaving therefore i = 1 */ - for (i = 1; i < CORGI_KEY_STROBE_NUM; i++) - pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_IN); - - return 0; -} - -static int corgikbd_resume(struct platform_device *dev) -{ - int i; - struct corgikbd *corgikbd = platform_get_drvdata(dev); - - for (i = 1; i < CORGI_KEY_STROBE_NUM; i++) - pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH); - - /* Upon resume, ignore the suspend key for a short while */ - corgikbd->suspend_jiffies=jiffies; - corgikbd->suspended = 0; - - return 0; -} -#else -#define corgikbd_suspend NULL -#define corgikbd_resume NULL -#endif - -static int __devinit corgikbd_probe(struct platform_device *pdev) -{ - struct corgikbd *corgikbd; - struct input_dev *input_dev; - int i, err = -ENOMEM; - - corgikbd = kzalloc(sizeof(struct corgikbd), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!corgikbd || !input_dev) - goto fail; - - platform_set_drvdata(pdev, corgikbd); - - corgikbd->input = input_dev; - spin_lock_init(&corgikbd->lock); - - /* Init Keyboard rescan timer */ - init_timer(&corgikbd->timer); - corgikbd->timer.function = corgikbd_timer_callback; - corgikbd->timer.data = (unsigned long) corgikbd; - - /* Init Hinge Timer */ - init_timer(&corgikbd->htimer); - corgikbd->htimer.function = corgikbd_hinge_timer; - corgikbd->htimer.data = (unsigned long) corgikbd; - - corgikbd->suspend_jiffies=jiffies; - - memcpy(corgikbd->keycode, corgikbd_keycode, sizeof(corgikbd->keycode)); - - input_dev->name = "Corgi Keyboard"; - input_dev->phys = "corgikbd/input0"; - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0x0001; - input_dev->id.product = 0x0001; - input_dev->id.version = 0x0100; - input_dev->dev.parent = &pdev->dev; - - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | - BIT_MASK(EV_PWR) | BIT_MASK(EV_SW); - input_dev->keycode = corgikbd->keycode; - input_dev->keycodesize = sizeof(unsigned char); - input_dev->keycodemax = ARRAY_SIZE(corgikbd_keycode); - - for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++) - set_bit(corgikbd->keycode[i], input_dev->keybit); - clear_bit(0, input_dev->keybit); - set_bit(SW_LID, input_dev->swbit); - set_bit(SW_TABLET_MODE, input_dev->swbit); - set_bit(SW_HEADPHONE_INSERT, input_dev->swbit); - - err = input_register_device(corgikbd->input); - if (err) - goto fail; - - mod_timer(&corgikbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL)); - - /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ - for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) { - pxa_gpio_mode(CORGI_GPIO_KEY_SENSE(i) | GPIO_IN); - if (request_irq(CORGI_IRQ_GPIO_KEY_SENSE(i), corgikbd_interrupt, - IRQF_DISABLED | IRQF_TRIGGER_RISING, - "corgikbd", corgikbd)) - printk(KERN_WARNING "corgikbd: Can't get IRQ: %d!\n", i); - } - - /* Set Strobe lines as outputs - set high */ - for (i = 0; i < CORGI_KEY_STROBE_NUM; i++) - pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH); - - /* Setup the headphone jack as an input */ - pxa_gpio_mode(CORGI_GPIO_AK_INT | GPIO_IN); - - return 0; - - fail: input_free_device(input_dev); - kfree(corgikbd); - return err; -} - -static int __devexit corgikbd_remove(struct platform_device *pdev) -{ - int i; - struct corgikbd *corgikbd = platform_get_drvdata(pdev); - - for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) - free_irq(CORGI_IRQ_GPIO_KEY_SENSE(i), corgikbd); - - del_timer_sync(&corgikbd->htimer); - del_timer_sync(&corgikbd->timer); - - input_unregister_device(corgikbd->input); - - kfree(corgikbd); - - return 0; -} - -static struct platform_driver corgikbd_driver = { - .probe = corgikbd_probe, - .remove = __devexit_p(corgikbd_remove), - .suspend = corgikbd_suspend, - .resume = corgikbd_resume, - .driver = { - .name = "corgi-keyboard", - .owner = THIS_MODULE, - }, -}; - -static int __init corgikbd_init(void) -{ - return platform_driver_register(&corgikbd_driver); -} - -static void __exit corgikbd_exit(void) -{ - platform_driver_unregister(&corgikbd_driver); -} - -module_init(corgikbd_init); -module_exit(corgikbd_exit); - -MODULE_AUTHOR("Richard Purdie "); -MODULE_DESCRIPTION("Corgi Keyboard Driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:corgi-keyboard"); diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c deleted file mode 100644 index 13967422658c..000000000000 --- a/drivers/input/keyboard/spitzkbd.c +++ /dev/null @@ -1,496 +0,0 @@ -/* - * Keyboard driver for Sharp Spitz, Borzoi and Akita (SL-Cxx00 series) - * - * Copyright (c) 2005 Richard Purdie - * - * Based on corgikbd.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define KB_ROWS 7 -#define KB_COLS 11 -#define KB_ROWMASK(r) (1 << (r)) -#define SCANCODE(r,c) (((r)<<4) + (c) + 1) -#define NR_SCANCODES ((KB_ROWS<<4) + 1) - -#define SCAN_INTERVAL (50) /* ms */ -#define HINGE_SCAN_INTERVAL (150) /* ms */ - -#define SPITZ_KEY_CALENDER KEY_F1 -#define SPITZ_KEY_ADDRESS KEY_F2 -#define SPITZ_KEY_FN KEY_F3 -#define SPITZ_KEY_CANCEL KEY_F4 -#define SPITZ_KEY_EXOK KEY_F5 -#define SPITZ_KEY_EXCANCEL KEY_F6 -#define SPITZ_KEY_EXJOGDOWN KEY_F7 -#define SPITZ_KEY_EXJOGUP KEY_F8 -#define SPITZ_KEY_JAP1 KEY_LEFTALT -#define SPITZ_KEY_JAP2 KEY_RIGHTCTRL -#define SPITZ_KEY_SYNC KEY_F9 -#define SPITZ_KEY_MAIL KEY_F10 -#define SPITZ_KEY_OK KEY_F11 -#define SPITZ_KEY_MENU KEY_F12 - -static unsigned char spitzkbd_keycode[NR_SCANCODES] = { - 0, /* 0 */ - KEY_LEFTCTRL, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, SPITZ_KEY_EXOK, SPITZ_KEY_EXCANCEL, 0, 0, 0, 0, 0, /* 1-16 */ - 0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, SPITZ_KEY_EXJOGDOWN, SPITZ_KEY_EXJOGUP, 0, 0, 0, 0, 0, /* 17-32 */ - KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0, /* 33-48 */ - SPITZ_KEY_ADDRESS, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, /* 49-64 */ - SPITZ_KEY_CALENDER, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, /* 65-80 */ - SPITZ_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, SPITZ_KEY_FN, 0, 0, 0, 0, 0, /* 81-96 */ - KEY_SYSRQ, SPITZ_KEY_JAP1, SPITZ_KEY_JAP2, SPITZ_KEY_CANCEL, SPITZ_KEY_OK, SPITZ_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0 /* 97-112 */ -}; - -static int spitz_strobes[] = { - SPITZ_GPIO_KEY_STROBE0, - SPITZ_GPIO_KEY_STROBE1, - SPITZ_GPIO_KEY_STROBE2, - SPITZ_GPIO_KEY_STROBE3, - SPITZ_GPIO_KEY_STROBE4, - SPITZ_GPIO_KEY_STROBE5, - SPITZ_GPIO_KEY_STROBE6, - SPITZ_GPIO_KEY_STROBE7, - SPITZ_GPIO_KEY_STROBE8, - SPITZ_GPIO_KEY_STROBE9, - SPITZ_GPIO_KEY_STROBE10, -}; - -static int spitz_senses[] = { - SPITZ_GPIO_KEY_SENSE0, - SPITZ_GPIO_KEY_SENSE1, - SPITZ_GPIO_KEY_SENSE2, - SPITZ_GPIO_KEY_SENSE3, - SPITZ_GPIO_KEY_SENSE4, - SPITZ_GPIO_KEY_SENSE5, - SPITZ_GPIO_KEY_SENSE6, -}; - -struct spitzkbd { - unsigned char keycode[ARRAY_SIZE(spitzkbd_keycode)]; - struct input_dev *input; - char phys[32]; - - spinlock_t lock; - struct timer_list timer; - struct timer_list htimer; - - unsigned int suspended; - unsigned long suspend_jiffies; -}; - -#define KB_DISCHARGE_DELAY 10 -#define KB_ACTIVATE_DELAY 10 - -/* Helper functions for reading the keyboard matrix - * Note: We should really be using the generic gpio functions to alter - * GPDR but it requires a function call per GPIO bit which is - * excessive when we need to access 11 bits at once, multiple times. - * These functions must be called within local_irq_save()/local_irq_restore() - * or similar. - */ -static inline void spitzkbd_discharge_all(void) -{ - /* STROBE All HiZ */ - GPCR0 = SPITZ_GPIO_G0_STROBE_BIT; - GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT; - GPCR1 = SPITZ_GPIO_G1_STROBE_BIT; - GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT; - GPCR2 = SPITZ_GPIO_G2_STROBE_BIT; - GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT; - GPCR3 = SPITZ_GPIO_G3_STROBE_BIT; - GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; -} - -static inline void spitzkbd_activate_all(void) -{ - /* STROBE ALL -> High */ - GPSR0 = SPITZ_GPIO_G0_STROBE_BIT; - GPDR0 |= SPITZ_GPIO_G0_STROBE_BIT; - GPSR1 = SPITZ_GPIO_G1_STROBE_BIT; - GPDR1 |= SPITZ_GPIO_G1_STROBE_BIT; - GPSR2 = SPITZ_GPIO_G2_STROBE_BIT; - GPDR2 |= SPITZ_GPIO_G2_STROBE_BIT; - GPSR3 = SPITZ_GPIO_G3_STROBE_BIT; - GPDR3 |= SPITZ_GPIO_G3_STROBE_BIT; - - udelay(KB_DISCHARGE_DELAY); - - /* Clear any interrupts we may have triggered when altering the GPIO lines */ - GEDR0 = SPITZ_GPIO_G0_SENSE_BIT; - GEDR1 = SPITZ_GPIO_G1_SENSE_BIT; - GEDR2 = SPITZ_GPIO_G2_SENSE_BIT; - GEDR3 = SPITZ_GPIO_G3_SENSE_BIT; -} - -static inline void spitzkbd_activate_col(int col) -{ - int gpio = spitz_strobes[col]; - GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT; - GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT; - GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT; - GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; - GPSR(gpio) = GPIO_bit(gpio); - GPDR(gpio) |= GPIO_bit(gpio); -} - -static inline void spitzkbd_reset_col(int col) -{ - int gpio = spitz_strobes[col]; - GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT; - GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT; - GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT; - GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; - GPCR(gpio) = GPIO_bit(gpio); - GPDR(gpio) |= GPIO_bit(gpio); -} - -static inline int spitzkbd_get_row_status(int col) -{ - return ((GPLR0 >> 12) & 0x01) | ((GPLR0 >> 16) & 0x02) - | ((GPLR2 >> 25) & 0x04) | ((GPLR1 << 1) & 0x08) - | ((GPLR1 >> 0) & 0x10) | ((GPLR1 >> 1) & 0x60); -} - -/* - * The spitz keyboard only generates interrupts when a key is pressed. - * When a key is pressed, we enable a timer which then scans the - * keyboard to detect when the key is released. - */ - -/* Scan the hardware keyboard and push any changes up through the input layer */ -static void spitzkbd_scankeyboard(struct spitzkbd *spitzkbd_data) -{ - unsigned int row, col, rowd; - unsigned long flags; - unsigned int num_pressed, pwrkey = ((GPLR(SPITZ_GPIO_ON_KEY) & GPIO_bit(SPITZ_GPIO_ON_KEY)) != 0); - - if (spitzkbd_data->suspended) - return; - - spin_lock_irqsave(&spitzkbd_data->lock, flags); - - num_pressed = 0; - for (col = 0; col < KB_COLS; col++) { - /* - * Discharge the output driver capacitatance - * in the keyboard matrix. (Yes it is significant..) - */ - - spitzkbd_discharge_all(); - udelay(KB_DISCHARGE_DELAY); - - spitzkbd_activate_col(col); - udelay(KB_ACTIVATE_DELAY); - - rowd = spitzkbd_get_row_status(col); - for (row = 0; row < KB_ROWS; row++) { - unsigned int scancode, pressed; - - scancode = SCANCODE(row, col); - pressed = rowd & KB_ROWMASK(row); - - input_report_key(spitzkbd_data->input, spitzkbd_data->keycode[scancode], pressed); - - if (pressed) - num_pressed++; - } - spitzkbd_reset_col(col); - } - - spitzkbd_activate_all(); - - input_report_key(spitzkbd_data->input, SPITZ_KEY_SYNC, (GPLR(SPITZ_GPIO_SYNC) & GPIO_bit(SPITZ_GPIO_SYNC)) != 0 ); - input_report_key(spitzkbd_data->input, KEY_SUSPEND, pwrkey); - - if (pwrkey && time_after(jiffies, spitzkbd_data->suspend_jiffies + msecs_to_jiffies(1000))) { - input_event(spitzkbd_data->input, EV_PWR, KEY_SUSPEND, 1); - spitzkbd_data->suspend_jiffies = jiffies; - } - - input_sync(spitzkbd_data->input); - - /* if any keys are pressed, enable the timer */ - if (num_pressed) - mod_timer(&spitzkbd_data->timer, jiffies + msecs_to_jiffies(SCAN_INTERVAL)); - - spin_unlock_irqrestore(&spitzkbd_data->lock, flags); -} - -/* - * spitz keyboard interrupt handler. - */ -static irqreturn_t spitzkbd_interrupt(int irq, void *dev_id) -{ - struct spitzkbd *spitzkbd_data = dev_id; - - if (!timer_pending(&spitzkbd_data->timer)) { - /** wait chattering delay **/ - udelay(20); - spitzkbd_scankeyboard(spitzkbd_data); - } - - return IRQ_HANDLED; -} - -/* - * spitz timer checking for released keys - */ -static void spitzkbd_timer_callback(unsigned long data) -{ - struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data; - - spitzkbd_scankeyboard(spitzkbd_data); -} - -/* - * The hinge switches generate an interrupt. - * We debounce the switches and pass them to the input system. - */ - -static irqreturn_t spitzkbd_hinge_isr(int irq, void *dev_id) -{ - struct spitzkbd *spitzkbd_data = dev_id; - - if (!timer_pending(&spitzkbd_data->htimer)) - mod_timer(&spitzkbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL)); - - return IRQ_HANDLED; -} - -#define HINGE_STABLE_COUNT 2 -static int sharpsl_hinge_state; -static int hinge_count; - -static void spitzkbd_hinge_timer(unsigned long data) -{ - struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data; - unsigned long state; - unsigned long flags; - - state = GPLR(SPITZ_GPIO_SWA) & (GPIO_bit(SPITZ_GPIO_SWA)|GPIO_bit(SPITZ_GPIO_SWB)); - state |= (GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)); - if (state != sharpsl_hinge_state) { - hinge_count = 0; - sharpsl_hinge_state = state; - } else if (hinge_count < HINGE_STABLE_COUNT) { - hinge_count++; - } - - if (hinge_count >= HINGE_STABLE_COUNT) { - spin_lock_irqsave(&spitzkbd_data->lock, flags); - - input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0)); - input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0)); - input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0)); - input_sync(spitzkbd_data->input); - - spin_unlock_irqrestore(&spitzkbd_data->lock, flags); - } else { - mod_timer(&spitzkbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL)); - } -} - -#ifdef CONFIG_PM -static int spitzkbd_suspend(struct platform_device *dev, pm_message_t state) -{ - int i; - struct spitzkbd *spitzkbd = platform_get_drvdata(dev); - spitzkbd->suspended = 1; - - /* Set Strobe lines as inputs - *except* strobe line 0 leave this - enabled so we can detect a power button press for resume */ - for (i = 1; i < SPITZ_KEY_STROBE_NUM; i++) - pxa_gpio_mode(spitz_strobes[i] | GPIO_IN); - - return 0; -} - -static int spitzkbd_resume(struct platform_device *dev) -{ - int i; - struct spitzkbd *spitzkbd = platform_get_drvdata(dev); - - for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++) - pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH); - - /* Upon resume, ignore the suspend key for a short while */ - spitzkbd->suspend_jiffies = jiffies; - spitzkbd->suspended = 0; - - return 0; -} -#else -#define spitzkbd_suspend NULL -#define spitzkbd_resume NULL -#endif - -static int __devinit spitzkbd_probe(struct platform_device *dev) -{ - struct spitzkbd *spitzkbd; - struct input_dev *input_dev; - int i, err = -ENOMEM; - - spitzkbd = kzalloc(sizeof(struct spitzkbd), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!spitzkbd || !input_dev) - goto fail; - - platform_set_drvdata(dev, spitzkbd); - strcpy(spitzkbd->phys, "spitzkbd/input0"); - - spin_lock_init(&spitzkbd->lock); - - /* Init Keyboard rescan timer */ - init_timer(&spitzkbd->timer); - spitzkbd->timer.function = spitzkbd_timer_callback; - spitzkbd->timer.data = (unsigned long) spitzkbd; - - /* Init Hinge Timer */ - init_timer(&spitzkbd->htimer); - spitzkbd->htimer.function = spitzkbd_hinge_timer; - spitzkbd->htimer.data = (unsigned long) spitzkbd; - - spitzkbd->suspend_jiffies = jiffies; - - spitzkbd->input = input_dev; - - input_dev->name = "Spitz Keyboard"; - input_dev->phys = spitzkbd->phys; - input_dev->dev.parent = &dev->dev; - - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0x0001; - input_dev->id.product = 0x0001; - input_dev->id.version = 0x0100; - - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | - BIT_MASK(EV_PWR) | BIT_MASK(EV_SW); - input_dev->keycode = spitzkbd->keycode; - input_dev->keycodesize = sizeof(unsigned char); - input_dev->keycodemax = ARRAY_SIZE(spitzkbd_keycode); - - memcpy(spitzkbd->keycode, spitzkbd_keycode, sizeof(spitzkbd->keycode)); - for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++) - set_bit(spitzkbd->keycode[i], input_dev->keybit); - clear_bit(0, input_dev->keybit); - set_bit(KEY_SUSPEND, input_dev->keybit); - set_bit(SW_LID, input_dev->swbit); - set_bit(SW_TABLET_MODE, input_dev->swbit); - set_bit(SW_HEADPHONE_INSERT, input_dev->swbit); - - err = input_register_device(input_dev); - if (err) - goto fail; - - mod_timer(&spitzkbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL)); - - /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ - for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++) { - pxa_gpio_mode(spitz_senses[i] | GPIO_IN); - if (request_irq(IRQ_GPIO(spitz_senses[i]), spitzkbd_interrupt, - IRQF_DISABLED|IRQF_TRIGGER_RISING, - "Spitzkbd Sense", spitzkbd)) - printk(KERN_WARNING "spitzkbd: Can't get Sense IRQ: %d!\n", i); - } - - /* Set Strobe lines as outputs - set high */ - for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++) - pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH); - - pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN); - pxa_gpio_mode(SPITZ_GPIO_ON_KEY | GPIO_IN); - pxa_gpio_mode(SPITZ_GPIO_SWA | GPIO_IN); - pxa_gpio_mode(SPITZ_GPIO_SWB | GPIO_IN); - - request_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd_interrupt, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "Spitzkbd Sync", spitzkbd); - request_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd_interrupt, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "Spitzkbd PwrOn", spitzkbd); - request_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd_hinge_isr, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "Spitzkbd SWA", spitzkbd); - request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "Spitzkbd SWB", spitzkbd); - request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "Spitzkbd HP", spitzkbd); - - return 0; - - fail: input_free_device(input_dev); - kfree(spitzkbd); - return err; -} - -static int __devexit spitzkbd_remove(struct platform_device *dev) -{ - int i; - struct spitzkbd *spitzkbd = platform_get_drvdata(dev); - - for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++) - free_irq(IRQ_GPIO(spitz_senses[i]), spitzkbd); - - free_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd); - free_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd); - free_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd); - free_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd); - free_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd); - - del_timer_sync(&spitzkbd->htimer); - del_timer_sync(&spitzkbd->timer); - - input_unregister_device(spitzkbd->input); - - kfree(spitzkbd); - - return 0; -} - -static struct platform_driver spitzkbd_driver = { - .probe = spitzkbd_probe, - .remove = __devexit_p(spitzkbd_remove), - .suspend = spitzkbd_suspend, - .resume = spitzkbd_resume, - .driver = { - .name = "spitz-keyboard", - .owner = THIS_MODULE, - }, -}; - -static int __init spitzkbd_init(void) -{ - return platform_driver_register(&spitzkbd_driver); -} - -static void __exit spitzkbd_exit(void) -{ - platform_driver_unregister(&spitzkbd_driver); -} - -module_init(spitzkbd_init); -module_exit(spitzkbd_exit); - -MODULE_AUTHOR("Richard Purdie "); -MODULE_DESCRIPTION("Spitz Keyboard Driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:spitz-keyboard"); diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c deleted file mode 100644 index 3910f269cfc8..000000000000 --- a/drivers/input/keyboard/tosakbd.c +++ /dev/null @@ -1,431 +0,0 @@ -/* - * Keyboard driver for Sharp Tosa models (SL-6000x) - * - * Copyright (c) 2005 Dirk Opfer - * Copyright (c) 2007 Dmitry Baryshkov - * - * Based on xtkbd.c/locomkbd.c/corgikbd.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define KB_ROWMASK(r) (1 << (r)) -#define SCANCODE(r, c) (((r)<<4) + (c) + 1) -#define NR_SCANCODES SCANCODE(TOSA_KEY_SENSE_NUM - 1, TOSA_KEY_STROBE_NUM - 1) + 1 - -#define SCAN_INTERVAL (HZ/10) - -#define KB_DISCHARGE_DELAY 10 -#define KB_ACTIVATE_DELAY 10 - -static unsigned short tosakbd_keycode[NR_SCANCODES] = { -0, -0, KEY_W, 0, 0, 0, KEY_K, KEY_BACKSPACE, KEY_P, -0, 0, 0, 0, 0, 0, 0, 0, -KEY_Q, KEY_E, KEY_T, KEY_Y, 0, KEY_O, KEY_I, KEY_COMMA, -0, 0, 0, 0, 0, 0, 0, 0, -KEY_A, KEY_D, KEY_G, KEY_U, 0, KEY_L, KEY_ENTER, KEY_DOT, -0, 0, 0, 0, 0, 0, 0, 0, -KEY_Z, KEY_C, KEY_V, KEY_J, TOSA_KEY_ADDRESSBOOK, TOSA_KEY_CANCEL, TOSA_KEY_CENTER, TOSA_KEY_OK, -KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, 0, -KEY_S, KEY_R, KEY_B, KEY_N, TOSA_KEY_CALENDAR, TOSA_KEY_HOMEPAGE, KEY_LEFTCTRL, TOSA_KEY_LIGHT, -0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, -KEY_TAB, KEY_SLASH, KEY_H, KEY_M, TOSA_KEY_MENU, 0, KEY_UP, 0, -0, 0, TOSA_KEY_FN, 0, 0, 0, 0, 0, -KEY_X, KEY_F, KEY_SPACE, KEY_APOSTROPHE, TOSA_KEY_MAIL, KEY_LEFT, KEY_DOWN, KEY_RIGHT, -0, 0, 0, -}; - -struct tosakbd { - unsigned short keycode[ARRAY_SIZE(tosakbd_keycode)]; - struct input_dev *input; - bool suspended; - spinlock_t lock; /* protect kbd scanning */ - struct timer_list timer; -}; - - -/* Helper functions for reading the keyboard matrix - * Note: We should really be using the generic gpio functions to alter - * GPDR but it requires a function call per GPIO bit which is - * excessive when we need to access 12 bits at once, multiple times. - * These functions must be called within local_irq_save()/local_irq_restore() - * or similar. - */ -#define GET_ROWS_STATUS(c) ((GPLR2 & TOSA_GPIO_ALL_SENSE_BIT) >> TOSA_GPIO_ALL_SENSE_RSHIFT) - -static inline void tosakbd_discharge_all(void) -{ - /* STROBE All HiZ */ - GPCR1 = TOSA_GPIO_HIGH_STROBE_BIT; - GPDR1 &= ~TOSA_GPIO_HIGH_STROBE_BIT; - GPCR2 = TOSA_GPIO_LOW_STROBE_BIT; - GPDR2 &= ~TOSA_GPIO_LOW_STROBE_BIT; -} - -static inline void tosakbd_activate_all(void) -{ - /* STROBE ALL -> High */ - GPSR1 = TOSA_GPIO_HIGH_STROBE_BIT; - GPDR1 |= TOSA_GPIO_HIGH_STROBE_BIT; - GPSR2 = TOSA_GPIO_LOW_STROBE_BIT; - GPDR2 |= TOSA_GPIO_LOW_STROBE_BIT; - - udelay(KB_DISCHARGE_DELAY); - - /* STATE CLEAR */ - GEDR2 |= TOSA_GPIO_ALL_SENSE_BIT; -} - -static inline void tosakbd_activate_col(int col) -{ - if (col <= 5) { - /* STROBE col -> High, not col -> HiZ */ - GPSR1 = TOSA_GPIO_STROBE_BIT(col); - GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); - } else { - /* STROBE col -> High, not col -> HiZ */ - GPSR2 = TOSA_GPIO_STROBE_BIT(col); - GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); - } -} - -static inline void tosakbd_reset_col(int col) -{ - if (col <= 5) { - /* STROBE col -> Low */ - GPCR1 = TOSA_GPIO_STROBE_BIT(col); - /* STROBE col -> out, not col -> HiZ */ - GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); - } else { - /* STROBE col -> Low */ - GPCR2 = TOSA_GPIO_STROBE_BIT(col); - /* STROBE col -> out, not col -> HiZ */ - GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); - } -} -/* - * The tosa keyboard only generates interrupts when a key is pressed. - * So when a key is pressed, we enable a timer. This timer scans the - * keyboard, and this is how we detect when the key is released. - */ - -/* Scan the hardware keyboard and push any changes up through the input layer */ -static void tosakbd_scankeyboard(struct platform_device *dev) -{ - struct tosakbd *tosakbd = platform_get_drvdata(dev); - unsigned int row, col, rowd; - unsigned long flags; - unsigned int num_pressed = 0; - - spin_lock_irqsave(&tosakbd->lock, flags); - - if (tosakbd->suspended) - goto out; - - for (col = 0; col < TOSA_KEY_STROBE_NUM; col++) { - /* - * Discharge the output driver capacitatance - * in the keyboard matrix. (Yes it is significant..) - */ - tosakbd_discharge_all(); - udelay(KB_DISCHARGE_DELAY); - - tosakbd_activate_col(col); - udelay(KB_ACTIVATE_DELAY); - - rowd = GET_ROWS_STATUS(col); - - for (row = 0; row < TOSA_KEY_SENSE_NUM; row++) { - unsigned int scancode, pressed; - scancode = SCANCODE(row, col); - pressed = rowd & KB_ROWMASK(row); - - if (pressed && !tosakbd->keycode[scancode]) - dev_warn(&dev->dev, - "unhandled scancode: 0x%02x\n", - scancode); - - input_report_key(tosakbd->input, - tosakbd->keycode[scancode], - pressed); - if (pressed) - num_pressed++; - } - - tosakbd_reset_col(col); - } - - tosakbd_activate_all(); - - input_sync(tosakbd->input); - - /* if any keys are pressed, enable the timer */ - if (num_pressed) - mod_timer(&tosakbd->timer, jiffies + SCAN_INTERVAL); - - out: - spin_unlock_irqrestore(&tosakbd->lock, flags); -} - -/* - * tosa keyboard interrupt handler. - */ -static irqreturn_t tosakbd_interrupt(int irq, void *__dev) -{ - struct platform_device *dev = __dev; - struct tosakbd *tosakbd = platform_get_drvdata(dev); - - if (!timer_pending(&tosakbd->timer)) { - /** wait chattering delay **/ - udelay(20); - tosakbd_scankeyboard(dev); - } - - return IRQ_HANDLED; -} - -/* - * tosa timer checking for released keys - */ -static void tosakbd_timer_callback(unsigned long __dev) -{ - struct platform_device *dev = (struct platform_device *)__dev; - - tosakbd_scankeyboard(dev); -} - -#ifdef CONFIG_PM -static int tosakbd_suspend(struct platform_device *dev, pm_message_t state) -{ - struct tosakbd *tosakbd = platform_get_drvdata(dev); - unsigned long flags; - - spin_lock_irqsave(&tosakbd->lock, flags); - tosakbd->suspended = true; - spin_unlock_irqrestore(&tosakbd->lock, flags); - - del_timer_sync(&tosakbd->timer); - - return 0; -} - -static int tosakbd_resume(struct platform_device *dev) -{ - struct tosakbd *tosakbd = platform_get_drvdata(dev); - - tosakbd->suspended = false; - tosakbd_scankeyboard(dev); - - return 0; -} -#else -#define tosakbd_suspend NULL -#define tosakbd_resume NULL -#endif - -static int __devinit tosakbd_probe(struct platform_device *pdev) { - - int i; - struct tosakbd *tosakbd; - struct input_dev *input_dev; - int error; - - tosakbd = kzalloc(sizeof(struct tosakbd), GFP_KERNEL); - if (!tosakbd) - return -ENOMEM; - - input_dev = input_allocate_device(); - if (!input_dev) { - kfree(tosakbd); - return -ENOMEM; - } - - platform_set_drvdata(pdev, tosakbd); - - spin_lock_init(&tosakbd->lock); - - /* Init Keyboard rescan timer */ - init_timer(&tosakbd->timer); - tosakbd->timer.function = tosakbd_timer_callback; - tosakbd->timer.data = (unsigned long) pdev; - - tosakbd->input = input_dev; - - input_set_drvdata(input_dev, tosakbd); - input_dev->name = "Tosa Keyboard"; - input_dev->phys = "tosakbd/input0"; - input_dev->dev.parent = &pdev->dev; - - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0x0001; - input_dev->id.product = 0x0001; - input_dev->id.version = 0x0100; - - input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - input_dev->keycode = tosakbd->keycode; - input_dev->keycodesize = sizeof(tosakbd->keycode[0]); - input_dev->keycodemax = ARRAY_SIZE(tosakbd_keycode); - - memcpy(tosakbd->keycode, tosakbd_keycode, sizeof(tosakbd_keycode)); - - for (i = 0; i < ARRAY_SIZE(tosakbd_keycode); i++) - __set_bit(tosakbd->keycode[i], input_dev->keybit); - __clear_bit(KEY_RESERVED, input_dev->keybit); - - /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ - for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) { - int gpio = TOSA_GPIO_KEY_SENSE(i); - int irq; - error = gpio_request(gpio, "tosakbd"); - if (error < 0) { - printk(KERN_ERR "tosakbd: failed to request GPIO %d, " - " error %d\n", gpio, error); - goto fail; - } - - error = gpio_direction_input(TOSA_GPIO_KEY_SENSE(i)); - if (error < 0) { - printk(KERN_ERR "tosakbd: failed to configure input" - " direction for GPIO %d, error %d\n", - gpio, error); - gpio_free(gpio); - goto fail; - } - - irq = gpio_to_irq(gpio); - if (irq < 0) { - error = irq; - printk(KERN_ERR "gpio-keys: Unable to get irq number" - " for GPIO %d, error %d\n", - gpio, error); - gpio_free(gpio); - goto fail; - } - - error = request_irq(irq, tosakbd_interrupt, - IRQF_DISABLED | IRQF_TRIGGER_RISING, - "tosakbd", pdev); - - if (error) { - printk("tosakbd: Can't get IRQ: %d: error %d!\n", - irq, error); - gpio_free(gpio); - goto fail; - } - } - - /* Set Strobe lines as outputs - set high */ - for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) { - int gpio = TOSA_GPIO_KEY_STROBE(i); - error = gpio_request(gpio, "tosakbd"); - if (error < 0) { - printk(KERN_ERR "tosakbd: failed to request GPIO %d, " - " error %d\n", gpio, error); - goto fail2; - } - - error = gpio_direction_output(gpio, 1); - if (error < 0) { - printk(KERN_ERR "tosakbd: failed to configure input" - " direction for GPIO %d, error %d\n", - gpio, error); - gpio_free(gpio); - goto fail2; - } - - } - - error = input_register_device(input_dev); - if (error) { - printk(KERN_ERR "tosakbd: Unable to register input device, " - "error: %d\n", error); - goto fail2; - } - - printk(KERN_INFO "input: Tosa Keyboard Registered\n"); - - return 0; - -fail2: - while (--i >= 0) - gpio_free(TOSA_GPIO_KEY_STROBE(i)); - - i = TOSA_KEY_SENSE_NUM; -fail: - while (--i >= 0) { - free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), pdev); - gpio_free(TOSA_GPIO_KEY_SENSE(i)); - } - - platform_set_drvdata(pdev, NULL); - input_free_device(input_dev); - kfree(tosakbd); - - return error; -} - -static int __devexit tosakbd_remove(struct platform_device *dev) -{ - int i; - struct tosakbd *tosakbd = platform_get_drvdata(dev); - - for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) - gpio_free(TOSA_GPIO_KEY_STROBE(i)); - - for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) { - free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), dev); - gpio_free(TOSA_GPIO_KEY_SENSE(i)); - } - - del_timer_sync(&tosakbd->timer); - - input_unregister_device(tosakbd->input); - - kfree(tosakbd); - - return 0; -} - -static struct platform_driver tosakbd_driver = { - .probe = tosakbd_probe, - .remove = __devexit_p(tosakbd_remove), - .suspend = tosakbd_suspend, - .resume = tosakbd_resume, - .driver = { - .name = "tosa-keyboard", - .owner = THIS_MODULE, - }, -}; - -static int __devinit tosakbd_init(void) -{ - return platform_driver_register(&tosakbd_driver); -} - -static void __exit tosakbd_exit(void) -{ - platform_driver_unregister(&tosakbd_driver); -} - -module_init(tosakbd_init); -module_exit(tosakbd_exit); - -MODULE_AUTHOR("Dirk Opfer "); -MODULE_DESCRIPTION("Tosa Keyboard Driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:tosa-keyboard"); diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c index 614b65d78fe9..e8bbc619f6df 100644 --- a/drivers/input/misc/ati_remote.c +++ b/drivers/input/misc/ati_remote.c @@ -98,10 +98,12 @@ * Module and Version Information, Module Parameters */ -#define ATI_REMOTE_VENDOR_ID 0x0bc7 -#define ATI_REMOTE_PRODUCT_ID 0x004 -#define LOLA_REMOTE_PRODUCT_ID 0x002 -#define MEDION_REMOTE_PRODUCT_ID 0x006 +#define ATI_REMOTE_VENDOR_ID 0x0bc7 +#define LOLA_REMOTE_PRODUCT_ID 0x0002 +#define LOLA2_REMOTE_PRODUCT_ID 0x0003 +#define ATI_REMOTE_PRODUCT_ID 0x0004 +#define NVIDIA_REMOTE_PRODUCT_ID 0x0005 +#define MEDION_REMOTE_PRODUCT_ID 0x0006 #define DRIVER_VERSION "2.2.1" #define DRIVER_AUTHOR "Torrey Hoffman " @@ -142,8 +144,10 @@ MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec #define err(format, arg...) printk(KERN_ERR format , ## arg) static struct usb_device_id ati_remote_table[] = { - { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) }, { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) }, + { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA2_REMOTE_PRODUCT_ID) }, + { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) }, + { USB_DEVICE(ATI_REMOTE_VENDOR_ID, NVIDIA_REMOTE_PRODUCT_ID) }, { USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) }, {} /* Terminating entry */ }; diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 0d22cb9ce42e..99d58764ef03 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -64,7 +64,6 @@ static const struct alps_model_info alps_model_data[] = { { { 0x62, 0x02, 0x14 }, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, { { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */ - { { 0x73, 0x02, 0x64 }, 0xf8, 0xf8, 0 }, /* HP Pavilion dm3 */ { { 0x52, 0x01, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */ }; diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index a138b5da79f9..0520c2e19927 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -25,6 +25,10 @@ printk(KERN_DEBUG format, ##arg); \ } while (0) +static bool force_elantech; +module_param_named(force_elantech, force_elantech, bool, 0644); +MODULE_PARM_DESC(force_elantech, "Force the Elantech PS/2 protocol extension to be used, 1 = enabled, 0 = disabled (default)."); + /* * Send a Synaptics style sliced query command */ @@ -182,13 +186,17 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) static int old_fingers; if (etd->fw_version_maj == 0x01) { - /* byte 0: D U p1 p2 1 p3 R L - byte 1: f 0 th tw x9 x8 y9 y8 */ + /* + * byte 0: D U p1 p2 1 p3 R L + * byte 1: f 0 th tw x9 x8 y9 y8 + */ fingers = ((packet[1] & 0x80) >> 7) + ((packet[1] & 0x30) >> 4); } else { - /* byte 0: n1 n0 p2 p1 1 p3 R L - byte 1: 0 0 0 0 x9 x8 y9 y8 */ + /* + * byte 0: n1 n0 p2 p1 1 p3 R L + * byte 1: 0 0 0 0 x9 x8 y9 y8 + */ fingers = (packet[0] & 0xc0) >> 6; } @@ -202,13 +210,15 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) input_report_key(dev, BTN_TOUCH, fingers != 0); - /* byte 2: x7 x6 x5 x4 x3 x2 x1 x0 - byte 3: y7 y6 y5 y4 y3 y2 y1 y0 */ + /* + * byte 2: x7 x6 x5 x4 x3 x2 x1 x0 + * byte 3: y7 y6 y5 y4 y3 y2 y1 y0 + */ if (fingers) { input_report_abs(dev, ABS_X, ((packet[1] & 0x0c) << 6) | packet[2]); - input_report_abs(dev, ABS_Y, ETP_YMAX_V1 - - (((packet[1] & 0x03) << 8) | packet[3])); + input_report_abs(dev, ABS_Y, + ETP_YMAX_V1 - (((packet[1] & 0x03) << 8) | packet[3])); } input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); @@ -247,34 +257,47 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse) switch (fingers) { case 1: - /* byte 1: x15 x14 x13 x12 x11 x10 x9 x8 - byte 2: x7 x6 x5 x4 x4 x2 x1 x0 */ - input_report_abs(dev, ABS_X, (packet[1] << 8) | packet[2]); - /* byte 4: y15 y14 y13 y12 y11 y10 y8 y8 - byte 5: y7 y6 y5 y4 y3 y2 y1 y0 */ - input_report_abs(dev, ABS_Y, ETP_YMAX_V2 - - ((packet[4] << 8) | packet[5])); + /* + * byte 1: . . . . . x10 x9 x8 + * byte 2: x7 x6 x5 x4 x4 x2 x1 x0 + */ + input_report_abs(dev, ABS_X, + ((packet[1] & 0x07) << 8) | packet[2]); + /* + * byte 4: . . . . . . y9 y8 + * byte 5: y7 y6 y5 y4 y3 y2 y1 y0 + */ + input_report_abs(dev, ABS_Y, + ETP_YMAX_V2 - (((packet[4] & 0x03) << 8) | packet[5])); break; case 2: - /* The coordinate of each finger is reported separately with - a lower resolution for two finger touches */ - /* byte 0: . . ay8 ax8 . . . . - byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 */ + /* + * The coordinate of each finger is reported separately + * with a lower resolution for two finger touches: + * byte 0: . . ay8 ax8 . . . . + * byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 + */ x1 = ((packet[0] & 0x10) << 4) | packet[1]; /* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */ y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]); - /* byte 3: . . by8 bx8 . . . . - byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 */ + /* + * byte 3: . . by8 bx8 . . . . + * byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 + */ x2 = ((packet[3] & 0x10) << 4) | packet[4]; /* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */ y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]); - /* For compatibility with the X Synaptics driver scale up one - coordinate and report as ordinary mouse movent */ + /* + * For compatibility with the X Synaptics driver scale up + * one coordinate and report as ordinary mouse movent + */ input_report_abs(dev, ABS_X, x1 << 2); input_report_abs(dev, ABS_Y, y1 << 2); - /* For compatibility with the proprietary X Elantech driver - report both coordinates as hat coordinates */ + /* + * For compatibility with the proprietary X Elantech driver + * report both coordinates as hat coordinates + */ input_report_abs(dev, ABS_HAT0X, x1); input_report_abs(dev, ABS_HAT0Y, y1); input_report_abs(dev, ABS_HAT1X, x2); @@ -596,8 +619,12 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties) param[0], param[1], param[2]); if (param[0] == 0 || param[1] != 0) { - pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n"); - return -1; + if (!force_elantech) { + pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n"); + return -1; + } + + pr_debug("elantech.c: Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n"); } if (set_properties) { @@ -666,7 +693,8 @@ int elantech_init(struct psmouse *psmouse) * Assume every version greater than this is new EeePC style * hardware with 6 byte packets */ - if (etd->fw_version_maj >= 0x02 && etd->fw_version_min >= 0x30) { + if ((etd->fw_version_maj == 0x02 && etd->fw_version_min >= 0x30) || + etd->fw_version_maj > 0x02) { etd->hw_version = 2; /* For now show extra debug information */ etd->debug = 1; diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index d8c0c8d6992c..cbc807264940 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -110,6 +110,7 @@ static struct workqueue_struct *kpsmoused_wq; struct psmouse_protocol { enum psmouse_type type; bool maxproto; + bool ignore_parity; /* Protocol should ignore parity errors from KBC */ const char *name; const char *alias; int (*detect)(struct psmouse *, bool); @@ -288,7 +289,9 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, if (psmouse->state == PSMOUSE_IGNORE) goto out; - if (flags & (SERIO_PARITY|SERIO_TIMEOUT)) { + if (unlikely((flags & SERIO_TIMEOUT) || + ((flags & SERIO_PARITY) && !psmouse->ignore_parity))) { + if (psmouse->state == PSMOUSE_ACTIVATED) printk(KERN_WARNING "psmouse.c: bad data from KBC -%s%s\n", flags & SERIO_TIMEOUT ? " timeout" : "", @@ -759,6 +762,7 @@ static const struct psmouse_protocol psmouse_protocols[] = { .name = "PS/2", .alias = "bare", .maxproto = true, + .ignore_parity = true, .detect = ps2bare_detect, }, #ifdef CONFIG_MOUSE_PS2_LOGIPS2PP @@ -786,6 +790,7 @@ static const struct psmouse_protocol psmouse_protocols[] = { .name = "ImPS/2", .alias = "imps", .maxproto = true, + .ignore_parity = true, .detect = intellimouse_detect, }, { @@ -793,6 +798,7 @@ static const struct psmouse_protocol psmouse_protocols[] = { .name = "ImExPS/2", .alias = "exps", .maxproto = true, + .ignore_parity = true, .detect = im_explorer_detect, }, #ifdef CONFIG_MOUSE_PS2_SYNAPTICS @@ -1222,6 +1228,7 @@ static void psmouse_disconnect(struct serio *serio) static int psmouse_switch_protocol(struct psmouse *psmouse, const struct psmouse_protocol *proto) { + const struct psmouse_protocol *selected_proto; struct input_dev *input_dev = psmouse->dev; input_dev->dev.parent = &psmouse->ps2dev.serio->dev; @@ -1245,9 +1252,14 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, return -1; psmouse->type = proto->type; - } else + selected_proto = proto; + } else { psmouse->type = psmouse_extensions(psmouse, psmouse_max_proto, true); + selected_proto = psmouse_protocol_by_type(psmouse->type); + } + + psmouse->ignore_parity = selected_proto->ignore_parity; /* * If mouse's packet size is 3 there is no point in polling the @@ -1267,7 +1279,7 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, psmouse->resync_time = 0; snprintf(psmouse->devname, sizeof(psmouse->devname), "%s %s %s", - psmouse_protocol_by_type(psmouse->type)->name, psmouse->vendor, psmouse->name); + selected_proto->name, psmouse->vendor, psmouse->name); input_dev->name = psmouse->devname; input_dev->phys = psmouse->phys; diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index e053bdd137ff..593e910bfc7a 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -47,6 +47,7 @@ struct psmouse { unsigned char pktcnt; unsigned char pktsize; unsigned char type; + bool ignore_parity; bool acks_disable_command; unsigned int model; unsigned long last; diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 026df6010161..ebd7a99efeae 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -137,7 +137,8 @@ static int synaptics_capability(struct psmouse *psmouse) if (synaptics_send_cmd(psmouse, SYN_QUE_CAPABILITIES, cap)) return -1; priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2]; - priv->ext_cap = 0; + priv->ext_cap = priv->ext_cap_0c = 0; + if (!SYN_CAP_VALID(priv->capabilities)) return -1; @@ -150,7 +151,7 @@ static int synaptics_capability(struct psmouse *psmouse) if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 1) { if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB, cap)) { printk(KERN_ERR "Synaptics claims to have extended capabilities," - " but I'm not able to read them."); + " but I'm not able to read them.\n"); } else { priv->ext_cap = (cap[0] << 16) | (cap[1] << 8) | cap[2]; @@ -162,6 +163,16 @@ static int synaptics_capability(struct psmouse *psmouse) priv->ext_cap &= 0xff0fff; } } + + if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 4) { + if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB_0C, cap)) { + printk(KERN_ERR "Synaptics claims to have extended capability 0x0c," + " but I'm not able to read it.\n"); + } else { + priv->ext_cap_0c = (cap[0] << 16) | (cap[1] << 8) | cap[2]; + } + } + return 0; } @@ -348,7 +359,15 @@ static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data hw->left = (buf[0] & 0x01) ? 1 : 0; hw->right = (buf[0] & 0x02) ? 1 : 0; - if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) { + if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) { + /* + * Clickpad's button is transmitted as middle button, + * however, since it is primary button, we will report + * it as BTN_LEFT. + */ + hw->left = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0; + + } else if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) { hw->middle = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0; if (hw->w == 2) hw->scroll = (signed char)(buf[1]); @@ -593,6 +612,12 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) dev->absres[ABS_X] = priv->x_res; dev->absres[ABS_Y] = priv->y_res; + + if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) { + /* Clickpads report only left button */ + __clear_bit(BTN_RIGHT, dev->keybit); + __clear_bit(BTN_MIDDLE, dev->keybit); + } } static void synaptics_disconnect(struct psmouse *psmouse) @@ -697,10 +722,10 @@ int synaptics_init(struct psmouse *psmouse) priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS; - printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx\n", + printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n", SYN_ID_MODEL(priv->identity), SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity), - priv->model_id, priv->capabilities, priv->ext_cap); + priv->model_id, priv->capabilities, priv->ext_cap, priv->ext_cap_0c); set_input_params(psmouse->dev, priv); diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index f0f40a331dc8..ae37c5d162a4 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -18,6 +18,7 @@ #define SYN_QUE_SERIAL_NUMBER_SUFFIX 0x07 #define SYN_QUE_RESOLUTION 0x08 #define SYN_QUE_EXT_CAPAB 0x09 +#define SYN_QUE_EXT_CAPAB_0C 0x0c /* synatics modes */ #define SYN_BIT_ABSOLUTE_MODE (1 << 7) @@ -48,6 +49,8 @@ #define SYN_CAP_VALID(c) ((((c) & 0x00ff00) >> 8) == 0x47) #define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20) #define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12) +#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16) +#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100100) /* synaptics modes query bits */ #define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7)) @@ -96,6 +99,7 @@ struct synaptics_data { unsigned long int model_id; /* Model-ID */ unsigned long int capabilities; /* Capabilities */ unsigned long int ext_cap; /* Extended Capabilities */ + unsigned long int ext_cap_0c; /* Ext Caps from 0x0c query */ unsigned long int identity; /* Identification */ int x_res; /* X resolution in units/mm */ int y_res; /* Y resolution in units/mm */ diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 8a8fa4d2d6a8..3d1ade2e5196 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -99,22 +99,6 @@ config TOUCHSCREEN_BITSY To compile this driver as a module, choose M here: the module will be called h3600_ts_input. -config TOUCHSCREEN_CORGI - tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)" - depends on PXA_SHARPSL - select CORGI_SSP_DEPRECATED - help - Say Y here to enable the driver for the touchscreen on the - Sharp SL-C7xx and SL-Cxx00 series of PDAs. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called corgi_ts. - - NOTE: this driver is deprecated, try enable SPI and generic - ADS7846-based touchscreen driver. - config TOUCHSCREEN_DA9034 tristate "Touchscreen support for Dialog Semiconductor DA9034" depends on PMIC_DA903X diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 7fef7d5cca23..41145d074dec 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o -obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c deleted file mode 100644 index 94a1919d439d..000000000000 --- a/drivers/input/touchscreen/corgi_ts.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - * Touchscreen driver for Sharp SL-C7xx and SL-Cxx00 models - * - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - - -#define PWR_MODE_ACTIVE 0 -#define PWR_MODE_SUSPEND 1 - -#define X_AXIS_MAX 3830 -#define X_AXIS_MIN 150 -#define Y_AXIS_MAX 3830 -#define Y_AXIS_MIN 190 -#define PRESSURE_MIN 0 -#define PRESSURE_MAX 15000 - -struct ts_event { - short pressure; - short x; - short y; -}; - -struct corgi_ts { - struct input_dev *input; - struct timer_list timer; - struct ts_event tc; - int pendown; - int power_mode; - int irq_gpio; - struct corgits_machinfo *machinfo; -}; - -#ifdef CONFIG_PXA25x -#define CCNT(a) asm volatile ("mrc p14, 0, %0, C1, C0, 0" : "=r"(a)) -#define PMNC_GET(x) asm volatile ("mrc p14, 0, %0, C0, C0, 0" : "=r"(x)) -#define PMNC_SET(x) asm volatile ("mcr p14, 0, %0, C0, C0, 0" : : "r"(x)) -#endif -#ifdef CONFIG_PXA27x -#define CCNT(a) asm volatile ("mrc p14, 0, %0, C1, C1, 0" : "=r"(a)) -#define PMNC_GET(x) asm volatile ("mrc p14, 0, %0, C0, C1, 0" : "=r"(x)) -#define PMNC_SET(x) asm volatile ("mcr p14, 0, %0, C0, C1, 0" : : "r"(x)) -#endif - -/* ADS7846 Touch Screen Controller bit definitions */ -#define ADSCTRL_PD0 (1u << 0) /* PD0 */ -#define ADSCTRL_PD1 (1u << 1) /* PD1 */ -#define ADSCTRL_DFR (1u << 2) /* SER/DFR */ -#define ADSCTRL_MOD (1u << 3) /* Mode */ -#define ADSCTRL_ADR_SH 4 /* Address setting */ -#define ADSCTRL_STS (1u << 7) /* Start Bit */ - -/* External Functions */ -extern unsigned int get_clk_frequency_khz(int info); - -static unsigned long calc_waittime(struct corgi_ts *corgi_ts) -{ - unsigned long hsync_invperiod = corgi_ts->machinfo->get_hsync_invperiod(); - - if (hsync_invperiod) - return get_clk_frequency_khz(0)*1000/hsync_invperiod; - else - return 0; -} - -static int sync_receive_data_send_cmd(struct corgi_ts *corgi_ts, int doRecive, int doSend, - unsigned int address, unsigned long wait_time) -{ - unsigned long timer1 = 0, timer2, pmnc = 0; - int pos = 0; - - if (wait_time && doSend) { - PMNC_GET(pmnc); - if (!(pmnc & 0x01)) - PMNC_SET(0x01); - - /* polling HSync */ - corgi_ts->machinfo->wait_hsync(); - /* get CCNT */ - CCNT(timer1); - } - - if (doRecive) - pos = corgi_ssp_ads7846_get(); - - if (doSend) { - int cmd = ADSCTRL_PD0 | ADSCTRL_PD1 | (address << ADSCTRL_ADR_SH) | ADSCTRL_STS; - /* dummy command */ - corgi_ssp_ads7846_put(cmd); - corgi_ssp_ads7846_get(); - - if (wait_time) { - /* Wait after HSync */ - CCNT(timer2); - if (timer2-timer1 > wait_time) { - /* too slow - timeout, try again */ - corgi_ts->machinfo->wait_hsync(); - /* get CCNT */ - CCNT(timer1); - /* Wait after HSync */ - CCNT(timer2); - } - while (timer2 - timer1 < wait_time) - CCNT(timer2); - } - corgi_ssp_ads7846_put(cmd); - if (wait_time && !(pmnc & 0x01)) - PMNC_SET(pmnc); - } - return pos; -} - -static int read_xydata(struct corgi_ts *corgi_ts) -{ - unsigned int x, y, z1, z2; - unsigned long flags, wait_time; - - /* critical section */ - local_irq_save(flags); - corgi_ssp_ads7846_lock(); - wait_time = calc_waittime(corgi_ts); - - /* Y-axis */ - sync_receive_data_send_cmd(corgi_ts, 0, 1, 1u, wait_time); - - /* Y-axis */ - sync_receive_data_send_cmd(corgi_ts, 1, 1, 1u, wait_time); - - /* X-axis */ - y = sync_receive_data_send_cmd(corgi_ts, 1, 1, 5u, wait_time); - - /* Z1 */ - x = sync_receive_data_send_cmd(corgi_ts, 1, 1, 3u, wait_time); - - /* Z2 */ - z1 = sync_receive_data_send_cmd(corgi_ts, 1, 1, 4u, wait_time); - z2 = sync_receive_data_send_cmd(corgi_ts, 1, 0, 4u, wait_time); - - /* Power-Down Enable */ - corgi_ssp_ads7846_put((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - corgi_ssp_ads7846_get(); - - corgi_ssp_ads7846_unlock(); - local_irq_restore(flags); - - if (x== 0 || y == 0 || z1 == 0 || (x * (z2 - z1) / z1) >= 15000) { - corgi_ts->tc.pressure = 0; - return 0; - } - - corgi_ts->tc.x = x; - corgi_ts->tc.y = y; - corgi_ts->tc.pressure = (x * (z2 - z1)) / z1; - return 1; -} - -static void new_data(struct corgi_ts *corgi_ts) -{ - struct input_dev *dev = corgi_ts->input; - - if (corgi_ts->power_mode != PWR_MODE_ACTIVE) - return; - - if (!corgi_ts->tc.pressure && corgi_ts->pendown == 0) - return; - - input_report_abs(dev, ABS_X, corgi_ts->tc.x); - input_report_abs(dev, ABS_Y, corgi_ts->tc.y); - input_report_abs(dev, ABS_PRESSURE, corgi_ts->tc.pressure); - input_report_key(dev, BTN_TOUCH, corgi_ts->pendown); - input_sync(dev); -} - -static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer) -{ - if ((GPLR(IRQ_TO_GPIO(corgi_ts->irq_gpio)) & GPIO_bit(IRQ_TO_GPIO(corgi_ts->irq_gpio))) == 0) { - /* Disable Interrupt */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_NONE); - if (read_xydata(corgi_ts)) { - corgi_ts->pendown = 1; - new_data(corgi_ts); - } - mod_timer(&corgi_ts->timer, jiffies + HZ / 100); - } else { - if (corgi_ts->pendown == 1 || corgi_ts->pendown == 2) { - mod_timer(&corgi_ts->timer, jiffies + HZ / 100); - corgi_ts->pendown++; - return; - } - - if (corgi_ts->pendown) { - corgi_ts->tc.pressure = 0; - new_data(corgi_ts); - } - - /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING); - corgi_ts->pendown = 0; - } -} - -static void corgi_ts_timer(unsigned long data) -{ - struct corgi_ts *corgits_data = (struct corgi_ts *) data; - - ts_interrupt_main(corgits_data, 1); -} - -static irqreturn_t ts_interrupt(int irq, void *dev_id) -{ - struct corgi_ts *corgits_data = dev_id; - - ts_interrupt_main(corgits_data, 0); - return IRQ_HANDLED; -} - -#ifdef CONFIG_PM -static int corgits_suspend(struct platform_device *dev, pm_message_t state) -{ - struct corgi_ts *corgi_ts = platform_get_drvdata(dev); - - if (corgi_ts->pendown) { - del_timer_sync(&corgi_ts->timer); - corgi_ts->tc.pressure = 0; - new_data(corgi_ts); - corgi_ts->pendown = 0; - } - corgi_ts->power_mode = PWR_MODE_SUSPEND; - - corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - - return 0; -} - -static int corgits_resume(struct platform_device *dev) -{ - struct corgi_ts *corgi_ts = platform_get_drvdata(dev); - - corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING); - corgi_ts->power_mode = PWR_MODE_ACTIVE; - - return 0; -} -#else -#define corgits_suspend NULL -#define corgits_resume NULL -#endif - -static int __devinit corgits_probe(struct platform_device *pdev) -{ - struct corgi_ts *corgi_ts; - struct input_dev *input_dev; - int err = -ENOMEM; - - corgi_ts = kzalloc(sizeof(struct corgi_ts), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!corgi_ts || !input_dev) - goto fail1; - - platform_set_drvdata(pdev, corgi_ts); - - corgi_ts->machinfo = pdev->dev.platform_data; - corgi_ts->irq_gpio = platform_get_irq(pdev, 0); - - if (corgi_ts->irq_gpio < 0) { - err = -ENODEV; - goto fail1; - } - - corgi_ts->input = input_dev; - - init_timer(&corgi_ts->timer); - corgi_ts->timer.data = (unsigned long) corgi_ts; - corgi_ts->timer.function = corgi_ts_timer; - - input_dev->name = "Corgi Touchscreen"; - input_dev->phys = "corgits/input0"; - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0x0001; - input_dev->id.product = 0x0002; - input_dev->id.version = 0x0100; - input_dev->dev.parent = &pdev->dev; - - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0); - input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0); - - pxa_gpio_mode(IRQ_TO_GPIO(corgi_ts->irq_gpio) | GPIO_IN); - - /* Initiaize ADS7846 Difference Reference mode */ - corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - corgi_ssp_ads7846_putget((3u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - corgi_ssp_ads7846_putget((5u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - - if (request_irq(corgi_ts->irq_gpio, ts_interrupt, IRQF_DISABLED, "ts", corgi_ts)) { - err = -EBUSY; - goto fail1; - } - - err = input_register_device(corgi_ts->input); - if (err) - goto fail2; - - corgi_ts->power_mode = PWR_MODE_ACTIVE; - - /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING); - - return 0; - - fail2: free_irq(corgi_ts->irq_gpio, corgi_ts); - fail1: input_free_device(input_dev); - kfree(corgi_ts); - return err; -} - -static int __devexit corgits_remove(struct platform_device *pdev) -{ - struct corgi_ts *corgi_ts = platform_get_drvdata(pdev); - - free_irq(corgi_ts->irq_gpio, corgi_ts); - del_timer_sync(&corgi_ts->timer); - corgi_ts->machinfo->put_hsync(); - input_unregister_device(corgi_ts->input); - kfree(corgi_ts); - - return 0; -} - -static struct platform_driver corgits_driver = { - .probe = corgits_probe, - .remove = __devexit_p(corgits_remove), - .suspend = corgits_suspend, - .resume = corgits_resume, - .driver = { - .name = "corgi-ts", - .owner = THIS_MODULE, - }, -}; - -static int __init corgits_init(void) -{ - return platform_driver_register(&corgits_driver); -} - -static void __exit corgits_exit(void) -{ - platform_driver_unregister(&corgits_driver); -} - -module_init(corgits_init); -module_exit(corgits_exit); - -MODULE_AUTHOR("Richard Purdie "); -MODULE_DESCRIPTION("Corgi TouchScreen Driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:corgi-ts"); diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 204b8a1a601c..75f8b73010fa 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -124,14 +124,25 @@ static irqreturn_t eeti_ts_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int eeti_ts_open(struct input_dev *dev) +static void eeti_ts_start(struct eeti_ts_priv *priv) { - struct eeti_ts_priv *priv = input_get_drvdata(dev); - enable_irq(priv->irq); /* Read the events once to arm the IRQ */ eeti_ts_read(&priv->work); +} + +static void eeti_ts_stop(struct eeti_ts_priv *priv) +{ + disable_irq(priv->irq); + cancel_work_sync(&priv->work); +} + +static int eeti_ts_open(struct input_dev *dev) +{ + struct eeti_ts_priv *priv = input_get_drvdata(dev); + + eeti_ts_start(priv); return 0; } @@ -140,8 +151,7 @@ static void eeti_ts_close(struct input_dev *dev) { struct eeti_ts_priv *priv = input_get_drvdata(dev); - disable_irq(priv->irq); - cancel_work_sync(&priv->work); + eeti_ts_stop(priv); } static int __devinit eeti_ts_probe(struct i2c_client *client, @@ -153,10 +163,12 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, unsigned int irq_flags; int err = -ENOMEM; - /* In contrast to what's described in the datasheet, there seems + /* + * In contrast to what's described in the datasheet, there seems * to be no way of probing the presence of that device using I2C * commands. So we need to blindly believe it is there, and wait - * for interrupts to occur. */ + * for interrupts to occur. + */ priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) { @@ -212,9 +224,11 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, goto err2; } - /* Disable the irq for now. It will be enabled once the input device - * is opened. */ - disable_irq(priv->irq); + /* + * Disable the device for now. It will be enabled once the + * input device is opened. + */ + eeti_ts_stop(priv); device_init_wakeup(&client->dev, 0); return 0; @@ -235,6 +249,12 @@ static int __devexit eeti_ts_remove(struct i2c_client *client) struct eeti_ts_priv *priv = i2c_get_clientdata(client); free_irq(priv->irq, priv); + /* + * eeti_ts_stop() leaves IRQ disabled. We need to re-enable it + * so that device still works if we reload the driver. + */ + enable_irq(priv->irq); + input_unregister_device(priv->input); i2c_set_clientdata(client, NULL); kfree(priv); @@ -246,6 +266,14 @@ static int __devexit eeti_ts_remove(struct i2c_client *client) static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg) { struct eeti_ts_priv *priv = i2c_get_clientdata(client); + struct input_dev *input_dev = priv->input; + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + eeti_ts_stop(priv); + + mutex_unlock(&input_dev->mutex); if (device_may_wakeup(&client->dev)) enable_irq_wake(priv->irq); @@ -256,10 +284,18 @@ static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg) static int eeti_ts_resume(struct i2c_client *client) { struct eeti_ts_priv *priv = i2c_get_clientdata(client); + struct input_dev *input_dev = priv->input; if (device_may_wakeup(&client->dev)) disable_irq_wake(priv->irq); + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + eeti_ts_start(priv); + + mutex_unlock(&input_dev->mutex); + return 0; } #else diff --git a/drivers/md/md.c b/drivers/md/md.c index 9712b2e97be4..cefd63daff31 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2109,12 +2109,18 @@ repeat: if (!mddev->in_sync || mddev->recovery_cp != MaxSector) { /* not clean */ /* .. if the array isn't clean, an 'even' event must also go * to spares. */ - if ((mddev->events&1)==0) + if ((mddev->events&1)==0) { nospares = 0; + sync_req = 2; /* force a second update to get the + * even/odd in sync */ + } } else { /* otherwise an 'odd' event must go to spares */ - if ((mddev->events&1)) + if ((mddev->events&1)) { nospares = 0; + sync_req = 2; /* force a second update to get the + * even/odd in sync */ + } } } diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 58ea0ecae7c3..15348c393b5d 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1527,7 +1527,7 @@ static void raid5_end_read_request(struct bio * bi, int error) clear_bit(R5_UPTODATE, &sh->dev[i].flags); atomic_inc(&rdev->read_errors); - if (conf->mddev->degraded) + if (conf->mddev->degraded >= conf->max_degraded) printk_rl(KERN_WARNING "raid5:%s: read error not correctable " "(sector %llu on %s).\n", diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c index fd8e1f45be36..7364b9642d00 100644 --- a/drivers/media/common/saa7146_fops.c +++ b/drivers/media/common/saa7146_fops.c @@ -423,15 +423,14 @@ static void vv_callback(struct saa7146_dev *dev, unsigned long status) } } -int saa7146_vv_devinit(struct saa7146_dev *dev) -{ - return v4l2_device_register(&dev->pci->dev, &dev->v4l2_dev); -} -EXPORT_SYMBOL_GPL(saa7146_vv_devinit); - int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv) { struct saa7146_vv *vv; + int err; + + err = v4l2_device_register(&dev->pci->dev, &dev->v4l2_dev); + if (err) + return err; vv = kzalloc(sizeof(struct saa7146_vv), GFP_KERNEL); if (vv == NULL) { diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index 5ed75263340a..b8b2c551a1e2 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -558,9 +558,11 @@ static int vidioc_s_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *f /* ok, accept it */ vv->ov_fb = *fb; vv->ov_fmt = fmt; - if (0 == vv->ov_fb.fmt.bytesperline) - vv->ov_fb.fmt.bytesperline = - vv->ov_fb.fmt.width * fmt->depth / 8; + + if (vv->ov_fb.fmt.bytesperline < vv->ov_fb.fmt.width) { + vv->ov_fb.fmt.bytesperline = vv->ov_fb.fmt.width * fmt->depth / 8; + DEB_D(("setting bytesperline to %d\n", vv->ov_fb.fmt.bytesperline)); + } mutex_unlock(&dev->lock); return 0; diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c index a3c07fe0e6c4..96972804f4ad 100644 --- a/drivers/media/dvb/frontends/stv090x.c +++ b/drivers/media/dvb/frontends/stv090x.c @@ -4470,6 +4470,10 @@ static int stv090x_setup(struct dvb_frontend *fe) if (stv090x_write_reg(state, STV090x_TSTRES0, 0x00) < 0) goto err; + /* workaround for stuck DiSEqC output */ + if (config->diseqc_envelope_mode) + stv090x_send_diseqc_burst(fe, SEC_MINI_A); + return 0; err: dprintk(FE_ERROR, 1, "I/O error"); diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 9fdf26cc6998..1500210c06cf 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -643,9 +643,6 @@ static void frontend_init(struct budget *budget) &budget->i2c_adap, &tt1600_isl6423_config); - } else { - dvb_frontend_detach(budget->dvb_frontend); - budget->dvb_frontend = NULL; } } break; diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index f8fc8654693d..9644cf760aaa 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -361,7 +361,7 @@ config VIDEO_SAA717X config VIDEO_SAA7191 tristate "Philips SAA7191 video decoder" - depends on VIDEO_V4L1 && I2C + depends on VIDEO_V4L2 && I2C ---help--- Support for the Philips SAA7191 video decoder. @@ -756,7 +756,7 @@ source "drivers/media/video/saa7134/Kconfig" config VIDEO_MXB tristate "Siemens-Nixdorf 'Multimedia eXtension Board'" - depends on PCI && VIDEO_V4L1 && I2C + depends on PCI && VIDEO_V4L2 && I2C select VIDEO_SAA7146_VV select VIDEO_TUNER select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index b88b6174a331..c51c386559f2 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -160,8 +160,6 @@ obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o -obj-$(CONFIG_ARCH_DAVINCI) += davinci/ - obj-$(CONFIG_VIDEO_AU0828) += au0828/ obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/ diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c index 7cf042f9b377..398dbe71cb82 100644 --- a/drivers/media/video/davinci/vpfe_capture.c +++ b/drivers/media/video/davinci/vpfe_capture.c @@ -223,7 +223,6 @@ int vpfe_register_ccdc_device(struct ccdc_hw_device *dev) BUG_ON(!dev->hw_ops.get_frame_format); BUG_ON(!dev->hw_ops.get_pixel_format); BUG_ON(!dev->hw_ops.set_pixel_format); - BUG_ON(!dev->hw_ops.set_params); BUG_ON(!dev->hw_ops.set_image_window); BUG_ON(!dev->hw_ops.get_image_window); BUG_ON(!dev->hw_ops.get_line_length); @@ -1689,11 +1688,12 @@ static long vpfe_param_handler(struct file *file, void *priv, struct vpfe_device *vpfe_dev = video_drvdata(file); int ret = 0; - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n"); + v4l2_dbg(2, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n"); if (vpfe_dev->started) { /* only allowed if streaming is not started */ - v4l2_err(&vpfe_dev->v4l2_dev, "device already started\n"); + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "device already started\n"); return -EBUSY; } @@ -1705,16 +1705,23 @@ static long vpfe_param_handler(struct file *file, void *priv, case VPFE_CMD_S_CCDC_RAW_PARAMS: v4l2_warn(&vpfe_dev->v4l2_dev, "VPFE_CMD_S_CCDC_RAW_PARAMS: experimental ioctl\n"); - ret = ccdc_dev->hw_ops.set_params(param); - if (ret) { - v4l2_err(&vpfe_dev->v4l2_dev, - "Error in setting parameters in CCDC\n"); - goto unlock_out; - } - if (vpfe_get_ccdc_image_format(vpfe_dev, &vpfe_dev->fmt) < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, - "Invalid image format at CCDC\n"); - goto unlock_out; + if (ccdc_dev->hw_ops.set_params) { + ret = ccdc_dev->hw_ops.set_params(param); + if (ret) { + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "Error setting parameters in CCDC\n"); + goto unlock_out; + } + if (vpfe_get_ccdc_image_format(vpfe_dev, + &vpfe_dev->fmt) < 0) { + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "Invalid image format at CCDC\n"); + goto unlock_out; + } + } else { + ret = -EINVAL; + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "VPFE_CMD_S_CCDC_RAW_PARAMS not supported\n"); } break; default: @@ -1830,7 +1837,7 @@ static __init int vpfe_probe(struct platform_device *pdev) if (NULL == ccdc_cfg) { v4l2_err(pdev->dev.driver, "Memory allocation failed for ccdc_cfg\n"); - goto probe_free_dev_mem; + goto probe_free_lock; } strncpy(ccdc_cfg->name, vpfe_cfg->ccdc, 32); @@ -1982,8 +1989,9 @@ probe_out_video_release: probe_out_release_irq: free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); probe_free_ccdc_cfg_mem: - mutex_unlock(&ccdc_lock); kfree(ccdc_cfg); +probe_free_lock: + mutex_unlock(&ccdc_lock); probe_free_dev_mem: kfree(vpfe_dev); return ret; diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c index 38a6e15e096b..3dee3e5844b6 100644 --- a/drivers/media/video/gspca/sn9c20x.c +++ b/drivers/media/video/gspca/sn9c20x.c @@ -1427,7 +1427,7 @@ static int input_kthread(void *data) struct gspca_dev *gspca_dev = (struct gspca_dev *)data; struct sd *sd = (struct sd *) gspca_dev; - DECLARE_WAIT_QUEUE_HEAD(wait); + DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wait); set_freezable(); for (;;) { if (kthread_should_stop()) diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c index 15b2eef8a3f6..edf0fe157501 100644 --- a/drivers/media/video/gspca/spca508.c +++ b/drivers/media/video/gspca/spca508.c @@ -1513,7 +1513,6 @@ static const struct sd_desc sd_desc = { static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0130, 0x0130), .driver_info = HamaUSBSightcam}, {USB_DEVICE(0x041e, 0x4018), .driver_info = CreativeVista}, - {USB_DEVICE(0x0461, 0x0815), .driver_info = MicroInnovationIC200}, {USB_DEVICE(0x0733, 0x0110), .driver_info = ViewQuestVQ110}, {USB_DEVICE(0x0af9, 0x0010), .driver_info = HamaUSBSightcam}, {USB_DEVICE(0x0af9, 0x0011), .driver_info = HamaUSBSightcam2}, diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index dc7f2b0fbc79..b9c80e2103b9 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -1053,6 +1053,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x401a), .driver_info = Rev072A}, {USB_DEVICE(0x041e, 0x403b), .driver_info = Rev012A}, {USB_DEVICE(0x0458, 0x7004), .driver_info = Rev072A}, + {USB_DEVICE(0x0461, 0x0815), .driver_info = Rev072A}, {USB_DEVICE(0x046d, 0x0928), .driver_info = Rev012A}, {USB_DEVICE(0x046d, 0x0929), .driver_info = Rev012A}, {USB_DEVICE(0x046d, 0x092a), .driver_info = Rev012A}, diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c index af73da34c83f..14f179a19485 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx.c @@ -524,8 +524,6 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x046D, 0x08F5), .driver_info = BRIDGE_ST6422 }, /* QuickCam Messenger (new) */ {USB_DEVICE(0x046D, 0x08F6), .driver_info = BRIDGE_ST6422 }, - /* QuickCam Messenger (new) */ - {USB_DEVICE(0x046D, 0x08DA), .driver_info = BRIDGE_ST6422 }, {} }; MODULE_DEVICE_TABLE(usb, device_table); diff --git a/drivers/media/video/hexium_gemini.c b/drivers/media/video/hexium_gemini.c index e620a3a92f25..ad2c232baa6d 100644 --- a/drivers/media/video/hexium_gemini.c +++ b/drivers/media/video/hexium_gemini.c @@ -356,9 +356,6 @@ static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_d DEB_EE((".\n")); - ret = saa7146_vv_devinit(dev); - if (ret) - return ret; hexium = kzalloc(sizeof(struct hexium), GFP_KERNEL); if (NULL == hexium) { printk("hexium_gemini: not enough kernel memory in hexium_attach().\n"); diff --git a/drivers/media/video/hexium_orion.c b/drivers/media/video/hexium_orion.c index fe596a1c12a8..938a1f8f880a 100644 --- a/drivers/media/video/hexium_orion.c +++ b/drivers/media/video/hexium_orion.c @@ -216,10 +216,6 @@ static int hexium_probe(struct saa7146_dev *dev) return -EFAULT; } - err = saa7146_vv_devinit(dev); - if (err) - return err; - hexium = kzalloc(sizeof(struct hexium), GFP_KERNEL); if (NULL == hexium) { printk("hexium_orion: hexium_probe: not enough kernel memory.\n"); diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c index 3c8ebfcb742e..34a66019190e 100644 --- a/drivers/media/video/mx1_camera.c +++ b/drivers/media/video/mx1_camera.c @@ -49,8 +49,6 @@ /* * CSI registers */ -#define DMA_CCR(x) (0x8c + ((x) << 6)) /* Control Registers */ -#define DMA_DIMR 0x08 /* Interrupt mask Register */ #define CSICR1 0x00 /* CSI Control Register 1 */ #define CSISR 0x08 /* CSI Status Register */ #define CSIRXR 0x10 /* CSI RxFIFO Register */ @@ -784,7 +782,7 @@ static int __init mx1_camera_probe(struct platform_device *pdev) pcdev); imx_dma_config_channel(pcdev->dma_chan, IMX_DMA_TYPE_FIFO, - IMX_DMA_MEMSIZE_32, DMA_REQ_CSI_R, 0); + IMX_DMA_MEMSIZE_32, MX1_DMA_REQ_CSI_R, 0); /* burst length : 16 words = 64 bytes */ imx_dma_config_burstlen(pcdev->dma_chan, 0); @@ -798,8 +796,8 @@ static int __init mx1_camera_probe(struct platform_device *pdev) set_fiq_handler(&mx1_camera_sof_fiq_start, &mx1_camera_sof_fiq_end - &mx1_camera_sof_fiq_start); - regs.ARM_r8 = DMA_BASE + DMA_DIMR; - regs.ARM_r9 = DMA_BASE + DMA_CCR(pcdev->dma_chan); + regs.ARM_r8 = (long)MX1_DMA_DIMR; + regs.ARM_r9 = (long)MX1_DMA_CCR(pcdev->dma_chan); regs.ARM_r10 = (long)pcdev->base + CSICR1; regs.ARM_fp = (long)pcdev->base + CSISR; regs.ARM_sp = 1 << pcdev->dma_chan; diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index 9f01f14e4aa2..ef0c8178f255 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -169,11 +169,7 @@ static struct saa7146_extension extension; static int mxb_probe(struct saa7146_dev *dev) { struct mxb *mxb = NULL; - int err; - err = saa7146_vv_devinit(dev); - if (err) - return err; mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL); if (mxb == NULL) { DEB_D(("not enough kernel memory.\n")); @@ -699,14 +695,17 @@ static struct saa7146_ext_vv vv_data; /* this function only gets called when the probing was successful */ static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) { - struct mxb *mxb = (struct mxb *)dev->ext_priv; + struct mxb *mxb; DEB_EE(("dev:%p\n", dev)); - /* checking for i2c-devices can be omitted here, because we - already did this in "mxb_vl42_probe" */ - saa7146_vv_init(dev, &vv_data); + if (mxb_probe(dev)) { + saa7146_vv_release(dev); + return -1; + } + mxb = (struct mxb *)dev->ext_priv; + vv_data.ops.vidioc_queryctrl = vidioc_queryctrl; vv_data.ops.vidioc_g_ctrl = vidioc_g_ctrl; vv_data.ops.vidioc_s_ctrl = vidioc_s_ctrl; @@ -726,6 +725,7 @@ static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data vv_data.ops.vidioc_default = vidioc_default; if (saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_GRABBER)) { ERR(("cannot register capture v4l2 device. skipping.\n")); + saa7146_vv_release(dev); return -1; } @@ -846,7 +846,6 @@ static struct saa7146_extension extension = { .pci_tbl = &pci_tbl[0], .module = THIS_MODULE, - .probe = mxb_probe, .attach = mxb_attach, .detach = mxb_detach, diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c index b189fe63394b..ce76d952e161 100644 --- a/drivers/media/video/omap24xxcam.c +++ b/drivers/media/video/omap24xxcam.c @@ -1405,7 +1405,7 @@ static int omap24xxcam_mmap_buffers(struct file *file, } size = 0; - for (i = first; i <= last; i++) { + for (i = first; i <= last && i < VIDEO_MAX_FRAME; i++) { struct videobuf_dmabuf *dma = videobuf_to_dma(vbq->bufs[i]); for (j = 0; j < dma->sglen; j++) { diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 5ecc30daef2d..04bf5c11308d 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -609,12 +609,9 @@ static void pxa_dma_add_tail_buf(struct pxa_camera_dev *pcdev, */ static void pxa_camera_start_capture(struct pxa_camera_dev *pcdev) { - unsigned long cicr0, cifr; + unsigned long cicr0; dev_dbg(pcdev->soc_host.v4l2_dev.dev, "%s\n", __func__); - /* Reset the FIFOs */ - cifr = __raw_readl(pcdev->base + CIFR) | CIFR_RESET_F; - __raw_writel(cifr, pcdev->base + CIFR); /* Enable End-Of-Frame Interrupt */ cicr0 = __raw_readl(pcdev->base + CICR0) | CICR0_ENB; cicr0 &= ~CICR0_EOFM; @@ -935,7 +932,7 @@ static void pxa_camera_deactivate(struct pxa_camera_dev *pcdev) static irqreturn_t pxa_camera_irq(int irq, void *data) { struct pxa_camera_dev *pcdev = data; - unsigned long status, cicr0; + unsigned long status, cifr, cicr0; struct pxa_buffer *buf; struct videobuf_buffer *vb; @@ -949,6 +946,10 @@ static irqreturn_t pxa_camera_irq(int irq, void *data) __raw_writel(status, pcdev->base + CISR); if (status & CISR_EOF) { + /* Reset the FIFOs */ + cifr = __raw_readl(pcdev->base + CIFR) | CIFR_RESET_F; + __raw_writel(cifr, pcdev->base + CIFR); + pcdev->active = list_first_entry(&pcdev->capture, struct pxa_buffer, vb.queue); vb = &pcdev->active->vb; diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 6e16b3979326..1ad980f8e770 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -1633,7 +1633,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, height = pix->height; pix->bytesperline = soc_mbus_bytes_per_line(width, xlate->host_fmt); - if (pix->bytesperline < 0) + if ((int)pix->bytesperline < 0) return pix->bytesperline; pix->sizeimage = height * pix->bytesperline; diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 0ed48959b590..e4f00e70a749 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -544,7 +544,7 @@ static irqreturn_t pxamci_detect_irq(int irq, void *devid) { struct pxamci_host *host = mmc_priv(devid); - mmc_detect_change(devid, host->pdata->detect_delay); + mmc_detect_change(devid, msecs_to_jiffies(host->pdata->detect_delay_ms)); return IRQ_HANDLED; } diff --git a/drivers/mtd/internal.h b/drivers/mtd/internal.h deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/drivers/mtd/mtdbdi.c b/drivers/mtd/mtdbdi.c deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c index 6995169d285a..cd17d09f385c 100644 --- a/drivers/net/arm/ep93xx_eth.c +++ b/drivers/net/arm/ep93xx_eth.c @@ -311,11 +311,6 @@ err: processed++; } - if (processed) { - wrw(ep, REG_RXDENQ, processed); - wrw(ep, REG_RXSTSENQ, processed); - } - return processed; } @@ -350,6 +345,11 @@ poll_some_more: goto poll_some_more; } + if (rx) { + wrw(ep, REG_RXDENQ, rx); + wrw(ep, REG_RXSTSENQ, rx); + } + return rx; } diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index fb8fc7d1b50d..dbf81788bb40 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4633,6 +4633,9 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) reg16 &= ~state; pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); + if (!pdev->bus->self) + return; + pos = pci_pcie_cap(pdev->bus->self); pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, ®16); reg16 &= ~state; diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 9f98c1c4a344..9b4e8f797a7a 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -1653,7 +1653,7 @@ fec_set_mac_address(struct net_device *dev, void *p) (dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24), fep->hwp + FEC_ADDR_LOW); writel((dev->dev_addr[5] << 16) | (dev->dev_addr[4] << 24), - fep + FEC_ADDR_HIGH); + fep->hwp + FEC_ADDR_HIGH); return 0; } diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index fc5938ba3d78..a527e37728cd 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -88,6 +88,11 @@ config LSI_ET1011C_PHY ---help--- Supports the LSI ET1011C PHY. +config MICREL_PHY + tristate "Driver for Micrel PHYs" + ---help--- + Supports the KSZ9021, VSC8201, KS8001 PHYs. + config FIXED_PHY bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" depends on PHYLIB=y diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 1342585af381..13bebab65d02 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -20,4 +20,5 @@ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o obj-$(CONFIG_NATIONAL_PHY) += national.o obj-$(CONFIG_STE10XP) += ste10Xp.o +obj-$(CONFIG_MICREL_PHY) += micrel.o obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c index a872aea4ed74..f443d43edd80 100644 --- a/drivers/net/phy/mdio-octeon.c +++ b/drivers/net/phy/mdio-octeon.c @@ -88,6 +88,7 @@ static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id, static int __init octeon_mdiobus_probe(struct platform_device *pdev) { struct octeon_mdiobus *bus; + union cvmx_smix_en smi_en; int i; int err = -ENOENT; @@ -103,6 +104,10 @@ static int __init octeon_mdiobus_probe(struct platform_device *pdev) if (!bus->mii_bus) goto err; + smi_en.u64 = 0; + smi_en.s.en = 1; + cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64); + /* * Standard Octeon evaluation boards don't support phy * interrupts, we need to poll. @@ -133,17 +138,22 @@ err_register: err: devm_kfree(&pdev->dev, bus); + smi_en.u64 = 0; + cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64); return err; } static int __exit octeon_mdiobus_remove(struct platform_device *pdev) { struct octeon_mdiobus *bus; + union cvmx_smix_en smi_en; bus = dev_get_drvdata(&pdev->dev); mdiobus_unregister(bus->mii_bus); mdiobus_free(bus->mii_bus); + smi_en.u64 = 0; + cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64); return 0; } diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c new file mode 100644 index 000000000000..0cd80e4d71d9 --- /dev/null +++ b/drivers/net/phy/micrel.c @@ -0,0 +1,104 @@ +/* + * drivers/net/phy/micrel.c + * + * Driver for Micrel PHYs + * + * Author: David J. Choi + * + * Copyright (c) 2010 Micrel, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Support : ksz9021 , vsc8201, ks8001 + */ + +#include +#include +#include + +#define PHY_ID_KSZ9021 0x00221611 +#define PHY_ID_VSC8201 0x000FC413 +#define PHY_ID_KS8001 0x0022161A + + +static int kszphy_config_init(struct phy_device *phydev) +{ + return 0; +} + + +static struct phy_driver ks8001_driver = { + .phy_id = PHY_ID_KS8001, + .phy_id_mask = 0x00fffff0, + .features = PHY_BASIC_FEATURES, + .flags = PHY_POLL, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + +static struct phy_driver vsc8201_driver = { + .phy_id = PHY_ID_VSC8201, + .name = "Micrel VSC8201", + .phy_id_mask = 0x00fffff0, + .features = PHY_BASIC_FEATURES, + .flags = PHY_POLL, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + +static struct phy_driver ksz9021_driver = { + .phy_id = PHY_ID_KSZ9021, + .phy_id_mask = 0x000fff10, + .name = "Micrel KSZ9021 Gigabit PHY", + .features = PHY_GBIT_FEATURES | SUPPORTED_Pause, + .flags = PHY_POLL, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE, }, +}; + +static int __init ksphy_init(void) +{ + int ret; + + ret = phy_driver_register(&ks8001_driver); + if (ret) + goto err1; + ret = phy_driver_register(&vsc8201_driver); + if (ret) + goto err2; + + ret = phy_driver_register(&ksz9021_driver); + if (ret) + goto err3; + return 0; + +err3: + phy_driver_unregister(&vsc8201_driver); +err2: + phy_driver_unregister(&ks8001_driver); +err1: + return ret; +} + +static void __exit ksphy_exit(void) +{ + phy_driver_unregister(&ks8001_driver); + phy_driver_unregister(&vsc8201_driver); + phy_driver_unregister(&ksz9021_driver); +} + +module_init(ksphy_init); +module_exit(ksphy_exit); + +MODULE_DESCRIPTION("Micrel PHY driver"); +MODULE_AUTHOR("David J. Choi"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 6e281bc825e5..8518a2e58e53 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -405,6 +405,7 @@ static ssize_t ppp_read(struct file *file, char __user *buf, DECLARE_WAITQUEUE(wait, current); ssize_t ret; struct sk_buff *skb = NULL; + struct iovec iov; ret = count; @@ -448,7 +449,9 @@ static ssize_t ppp_read(struct file *file, char __user *buf, if (skb->len > count) goto outf; ret = -EFAULT; - if (copy_to_user(buf, skb->data, skb->len)) + iov.iov_base = buf; + iov.iov_len = count; + if (skb_copy_datagram_iovec(skb, 0, &iov, skb->len)) goto outf; ret = skb->len; @@ -1567,13 +1570,22 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb) struct channel *pch = chan->ppp; int proto; - if (!pch || skb->len == 0) { + if (!pch) { kfree_skb(skb); return; } - proto = PPP_PROTO(skb); read_lock_bh(&pch->upl); + if (!pskb_may_pull(skb, 2)) { + kfree_skb(skb); + if (pch->ppp) { + ++pch->ppp->dev->stats.rx_length_errors; + ppp_receive_error(pch->ppp); + } + goto done; + } + + proto = PPP_PROTO(skb); if (!pch->ppp || proto >= 0xc000 || proto == PPP_CCPFRAG) { /* put it on the channel queue */ skb_queue_tail(&pch->file.rq, skb); @@ -1585,6 +1597,8 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb) } else { ppp_do_recv(pch->ppp, skb, pch); } + +done: read_unlock_bh(&pch->upl); } @@ -1617,7 +1631,8 @@ ppp_input_error(struct ppp_channel *chan, int code) static void ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) { - if (pskb_may_pull(skb, 2)) { + /* note: a 0-length skb is used as an error indication */ + if (skb->len > 0) { #ifdef CONFIG_PPP_MULTILINK /* XXX do channel-level decompression here */ if (PPP_PROTO(skb) == PPP_MP) @@ -1625,15 +1640,10 @@ ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) else #endif /* CONFIG_PPP_MULTILINK */ ppp_receive_nonmp_frame(ppp, skb); - return; + } else { + kfree_skb(skb); + ppp_receive_error(ppp); } - - if (skb->len > 0) - /* note: a 0-length skb is used as an error indication */ - ++ppp->dev->stats.rx_length_errors; - - kfree_skb(skb); - ppp_receive_error(ppp); } static void diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 4748c21eb72e..dd8106ff35aa 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1042,14 +1042,14 @@ static void rtl8169_vlan_rx_register(struct net_device *dev, } static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc, - struct sk_buff *skb) + struct sk_buff *skb, int polling) { u32 opts2 = le32_to_cpu(desc->opts2); struct vlan_group *vlgrp = tp->vlgrp; int ret; if (vlgrp && (opts2 & RxVlanTag)) { - vlan_hwaccel_receive_skb(skb, vlgrp, swab16(opts2 & 0xffff)); + __vlan_hwaccel_rx(skb, vlgrp, swab16(opts2 & 0xffff), polling); ret = 0; } else ret = -1; @@ -1066,7 +1066,7 @@ static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp, } static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc, - struct sk_buff *skb) + struct sk_buff *skb, int polling) { return -1; } @@ -4445,12 +4445,20 @@ out: return done; } +/* + * Warning : rtl8169_rx_interrupt() might be called : + * 1) from NAPI (softirq) context + * (polling = 1 : we should call netif_receive_skb()) + * 2) from process context (rtl8169_reset_task()) + * (polling = 0 : we must call netif_rx() instead) + */ static int rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, void __iomem *ioaddr, u32 budget) { unsigned int cur_rx, rx_left; unsigned int delta, count; + int polling = (budget != ~(u32)0) ? 1 : 0; cur_rx = tp->cur_rx; rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx; @@ -4512,8 +4520,12 @@ static int rtl8169_rx_interrupt(struct net_device *dev, skb_put(skb, pkt_size); skb->protocol = eth_type_trans(skb, dev); - if (rtl8169_rx_vlan_skb(tp, desc, skb) < 0) - netif_receive_skb(skb); + if (rtl8169_rx_vlan_skb(tp, desc, skb, polling) < 0) { + if (likely(polling)) + netif_receive_skb(skb); + else + netif_rx(skb); + } dev->stats.rx_bytes += pkt_size; dev->stats.rx_packets++; diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index 9944e5d662c0..04efc0c1bda9 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -2353,17 +2353,36 @@ static int sbmac_init(struct platform_device *pldev, long long base) sc->mii_bus = mdiobus_alloc(); if (sc->mii_bus == NULL) { - sbmac_uninitctx(sc); - return -ENOMEM; + err = -ENOMEM; + goto uninit_ctx; } + sc->mii_bus->name = sbmac_mdio_string; + snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx); + sc->mii_bus->priv = sc; + sc->mii_bus->read = sbmac_mii_read; + sc->mii_bus->write = sbmac_mii_write; + sc->mii_bus->irq = sc->phy_irq; + for (i = 0; i < PHY_MAX_ADDR; ++i) + sc->mii_bus->irq[i] = SBMAC_PHY_INT; + + sc->mii_bus->parent = &pldev->dev; + /* + * Probe PHY address + */ + err = mdiobus_register(sc->mii_bus); + if (err) { + printk(KERN_ERR "%s: unable to register MDIO bus\n", + dev->name); + goto free_mdio; + } + dev_set_drvdata(&pldev->dev, sc->mii_bus); + err = register_netdev(dev); if (err) { printk(KERN_ERR "%s.%d: unable to register netdev\n", sbmac_string, idx); - mdiobus_free(sc->mii_bus); - sbmac_uninitctx(sc); - return err; + goto unreg_mdio; } pr_info("%s.%d: registered as %s\n", sbmac_string, idx, dev->name); @@ -2379,19 +2398,15 @@ static int sbmac_init(struct platform_device *pldev, long long base) pr_info("%s: SiByte Ethernet at 0x%08Lx, address: %pM\n", dev->name, base, eaddr); - sc->mii_bus->name = sbmac_mdio_string; - snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx); - sc->mii_bus->priv = sc; - sc->mii_bus->read = sbmac_mii_read; - sc->mii_bus->write = sbmac_mii_write; - sc->mii_bus->irq = sc->phy_irq; - for (i = 0; i < PHY_MAX_ADDR; ++i) - sc->mii_bus->irq[i] = SBMAC_PHY_INT; - - sc->mii_bus->parent = &pldev->dev; - dev_set_drvdata(&pldev->dev, sc->mii_bus); - return 0; +unreg_mdio: + mdiobus_unregister(sc->mii_bus); + dev_set_drvdata(&pldev->dev, NULL); +free_mdio: + mdiobus_free(sc->mii_bus); +uninit_ctx: + sbmac_uninitctx(sc); + return err; } @@ -2417,16 +2432,6 @@ static int sbmac_open(struct net_device *dev) goto out_err; } - /* - * Probe PHY address - */ - err = mdiobus_register(sc->mii_bus); - if (err) { - printk(KERN_ERR "%s: unable to register MDIO bus\n", - dev->name); - goto out_unirq; - } - sc->sbm_speed = sbmac_speed_none; sc->sbm_duplex = sbmac_duplex_none; sc->sbm_fc = sbmac_fc_none; @@ -2457,11 +2462,7 @@ static int sbmac_open(struct net_device *dev) return 0; out_unregister: - mdiobus_unregister(sc->mii_bus); - -out_unirq: free_irq(dev->irq, dev); - out_err: return err; } @@ -2650,9 +2651,6 @@ static int sbmac_close(struct net_device *dev) phy_disconnect(sc->phy_dev); sc->phy_dev = NULL; - - mdiobus_unregister(sc->mii_bus); - free_irq(dev->irq, dev); sbdma_emptyring(&(sc->sbm_txdma)); @@ -2760,6 +2758,7 @@ static int __exit sbmac_remove(struct platform_device *pldev) unregister_netdev(dev); sbmac_uninitctx(sc); + mdiobus_unregister(sc->mii_bus); mdiobus_free(sc->mii_bus); iounmap(sc->sbm_base); free_netdev(dev); diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 5d58abc224f4..d7b7018a1de1 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -400,7 +400,6 @@ config USB_IPHETH config USB_SIERRA_NET tristate "USB-to-WWAN Driver for Sierra Wireless modems" depends on USB_USBNET - default y help Choose this option if you have a Sierra Wireless USB-to-WWAN device. diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 04b281002a76..5dfed9297b22 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -240,7 +240,7 @@ static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 valu goto out; dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg); - dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1c : 0x14); + dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1a : 0x12); for (i = 0; i < DM_TIMEOUT; i++) { u8 tmp; diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index a44f9e0ea098..f1942d69a0d5 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -789,6 +789,9 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf) /* prepare sync message from template */ memcpy(priv->sync_msg, sync_tmplate, sizeof(priv->sync_msg)); + /* initiate the sync sequence */ + sierra_net_dosync(dev); + return 0; } diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 269fda362836..c24067f1a0cb 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -246,7 +246,7 @@ static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index, u32 idx, i; i = (*index) % ring_limit; - (*index) = idx = le32_to_cpu(ring_control->device_idx[1]); + (*index) = idx = le32_to_cpu(ring_control->device_idx[ring_index]); idx %= ring_limit; while (i != idx) { diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index d189e4743e69..a44733d44ca1 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -234,7 +234,8 @@ config PCMCIA_PXA2XX depends on ARM && ARCH_PXA && PCMCIA depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \ || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \ - || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2) + || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \ + || MACH_VPAC270) select PCMCIA_SOC_COMMON help Say Y here to include support for the PXA2xx PCMCIA controller diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 381b031d9d75..4dae3613c458 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -66,6 +66,7 @@ pxa2xx-obj-$(CONFIG_MACH_PALMTC) += pxa2xx_palmtc.o pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o +pxa2xx-obj-$(CONFIG_MACH_VPAC270) += pxa2xx_vpac270.o obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y) diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index 75ed866e6953..c3383750e333 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -671,20 +671,22 @@ static int pccardd(void *__skt) socket_remove(skt); if (sysfs_events & PCMCIA_UEVENT_INSERT) socket_insert(skt); - if ((sysfs_events & PCMCIA_UEVENT_RESUME) && - !(skt->state & SOCKET_CARDBUS)) { - ret = socket_resume(skt); - if (!ret && skt->callback) - skt->callback->resume(skt); - } if ((sysfs_events & PCMCIA_UEVENT_SUSPEND) && !(skt->state & SOCKET_CARDBUS)) { if (skt->callback) ret = skt->callback->suspend(skt); else ret = 0; - if (!ret) + if (!ret) { socket_suspend(skt); + msleep(100); + } + } + if ((sysfs_events & PCMCIA_UEVENT_RESUME) && + !(skt->state & SOCKET_CARDBUS)) { + ret = socket_resume(skt); + if (!ret && skt->callback) + skt->callback->resume(skt); } if ((sysfs_events & PCMCIA_UEVENT_REQUERY) && !(skt->state & SOCKET_CARDBUS)) { diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c index 2d48196a48cd..0f4cc3f00028 100644 --- a/drivers/pcmcia/db1xxx_ss.c +++ b/drivers/pcmcia/db1xxx_ss.c @@ -146,7 +146,6 @@ static irqreturn_t db1200_pcmcia_cdirq(int irq, void *data) static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) { int ret; - unsigned long flags; if (sock->stschg_irq != -1) { ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq, @@ -162,30 +161,23 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) * active one disabled. */ if (sock->board_type == BOARD_TYPE_DB1200) { - local_irq_save(flags); - ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq, IRQF_DISABLED, "pcmcia_insert", sock); - if (ret) { - local_irq_restore(flags); + if (ret) goto out1; - } ret = request_irq(sock->eject_irq, db1200_pcmcia_cdirq, IRQF_DISABLED, "pcmcia_eject", sock); if (ret) { free_irq(sock->insert_irq, sock); - local_irq_restore(flags); goto out1; } - /* disable the currently active one */ + /* enable the currently silent one */ if (db1200_card_inserted(sock)) - disable_irq_nosync(sock->insert_irq); + enable_irq(sock->eject_irq); else - disable_irq_nosync(sock->eject_irq); - - local_irq_restore(flags); + enable_irq(sock->insert_irq); } else { /* all other (older) Db1x00 boards use a GPIO to show * card detection status: use both-edge triggers. diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 508f94a2a78d..041eee43fd8d 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -1283,6 +1283,7 @@ static int ds_event(struct pcmcia_socket *skt, event_t event, int priority) destroy_cis_cache(skt); kfree(skt->fake_cis); skt->fake_cis = NULL; + s->functions = 0; mutex_unlock(&s->ops_mutex); /* now, add the new card */ ds_event(skt, CS_EVENT_CARD_INSERTION, diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c index 104e73d5d86c..7631faa0cadd 100644 --- a/drivers/pcmcia/pcmcia_ioctl.c +++ b/drivers/pcmcia/pcmcia_ioctl.c @@ -711,7 +711,7 @@ static int ds_open(struct inode *inode, struct file *file) warning_printed = 1; } - if (s->pcmcia_state.present) + if (atomic_read(&s->present)) queue_event(user, CS_EVENT_CARD_INSERTION); out: unlock_kernel(); @@ -770,9 +770,6 @@ static ssize_t ds_read(struct file *file, char __user *buf, return -EIO; s = user->socket; - if (s->pcmcia_state.dead) - return -EIO; - ret = wait_event_interruptible(s->queue, !queue_empty(user)); if (ret == 0) ret = put_user(get_queued_event(user), (int __user *)buf) ? -EFAULT : 4; @@ -838,8 +835,6 @@ static int ds_ioctl(struct inode *inode, struct file *file, return -EIO; s = user->socket; - if (s->pcmcia_state.dead) - return -EIO; size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT; if (size > sizeof(ds_ioctl_arg_t)) diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c new file mode 100644 index 000000000000..55627eccee8e --- /dev/null +++ b/drivers/pcmcia/pxa2xx_vpac270.c @@ -0,0 +1,229 @@ +/* + * linux/drivers/pcmcia/pxa2xx_vpac270.c + * + * Driver for Voipac PXA270 PCMCIA and CF sockets + * + * Copyright (C) 2010 + * Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include + +#include + +#include +#include + +#include "soc_common.h" + +static struct pcmcia_irqs cd_irqs[] = { + { + .sock = 0, + .irq = IRQ_GPIO(GPIO84_VPAC270_PCMCIA_CD), + .str = "PCMCIA CD" + }, + { + .sock = 1, + .irq = IRQ_GPIO(GPIO17_VPAC270_CF_CD), + .str = "CF CD" + }, +}; + +static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret; + + if (skt->nr == 0) { + ret = gpio_request(GPIO84_VPAC270_PCMCIA_CD, "PCMCIA CD"); + if (ret) + goto err1; + ret = gpio_direction_input(GPIO84_VPAC270_PCMCIA_CD); + if (ret) + goto err2; + + ret = gpio_request(GPIO35_VPAC270_PCMCIA_RDY, "PCMCIA RDY"); + if (ret) + goto err2; + ret = gpio_direction_input(GPIO35_VPAC270_PCMCIA_RDY); + if (ret) + goto err3; + + ret = gpio_request(GPIO107_VPAC270_PCMCIA_PPEN, "PCMCIA PPEN"); + if (ret) + goto err3; + ret = gpio_direction_output(GPIO107_VPAC270_PCMCIA_PPEN, 0); + if (ret) + goto err4; + + ret = gpio_request(GPIO11_VPAC270_PCMCIA_RESET, "PCMCIA RESET"); + if (ret) + goto err4; + ret = gpio_direction_output(GPIO11_VPAC270_PCMCIA_RESET, 0); + if (ret) + goto err5; + + skt->socket.pci_irq = gpio_to_irq(GPIO35_VPAC270_PCMCIA_RDY); + + return soc_pcmcia_request_irqs(skt, &cd_irqs[0], 1); + +err5: + gpio_free(GPIO11_VPAC270_PCMCIA_RESET); +err4: + gpio_free(GPIO107_VPAC270_PCMCIA_PPEN); +err3: + gpio_free(GPIO35_VPAC270_PCMCIA_RDY); +err2: + gpio_free(GPIO84_VPAC270_PCMCIA_CD); +err1: + return ret; + + } else { + ret = gpio_request(GPIO17_VPAC270_CF_CD, "CF CD"); + if (ret) + goto err6; + ret = gpio_direction_input(GPIO17_VPAC270_CF_CD); + if (ret) + goto err7; + + ret = gpio_request(GPIO12_VPAC270_CF_RDY, "CF RDY"); + if (ret) + goto err7; + ret = gpio_direction_input(GPIO12_VPAC270_CF_RDY); + if (ret) + goto err8; + + ret = gpio_request(GPIO16_VPAC270_CF_RESET, "CF RESET"); + if (ret) + goto err8; + ret = gpio_direction_output(GPIO16_VPAC270_CF_RESET, 0); + if (ret) + goto err9; + + skt->socket.pci_irq = gpio_to_irq(GPIO12_VPAC270_CF_RDY); + + return soc_pcmcia_request_irqs(skt, &cd_irqs[1], 1); + +err9: + gpio_free(GPIO16_VPAC270_CF_RESET); +err8: + gpio_free(GPIO12_VPAC270_CF_RDY); +err7: + gpio_free(GPIO17_VPAC270_CF_CD); +err6: + return ret; + + } +} + +static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + gpio_free(GPIO11_VPAC270_PCMCIA_RESET); + gpio_free(GPIO107_VPAC270_PCMCIA_PPEN); + gpio_free(GPIO35_VPAC270_PCMCIA_RDY); + gpio_free(GPIO84_VPAC270_PCMCIA_CD); + gpio_free(GPIO16_VPAC270_CF_RESET); + gpio_free(GPIO12_VPAC270_CF_RDY); + gpio_free(GPIO17_VPAC270_CF_CD); +} + +static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + if (skt->nr == 0) { + state->detect = !gpio_get_value(GPIO84_VPAC270_PCMCIA_CD); + state->ready = !!gpio_get_value(GPIO35_VPAC270_PCMCIA_RDY); + } else { + state->detect = !gpio_get_value(GPIO17_VPAC270_CF_CD); + state->ready = !!gpio_get_value(GPIO12_VPAC270_CF_RDY); + } + state->bvd1 = 1; + state->bvd2 = 1; + state->wrprot = 0; + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int +vpac270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + if (skt->nr == 0) { + gpio_set_value(GPIO11_VPAC270_PCMCIA_RESET, + (state->flags & SS_RESET)); + gpio_set_value(GPIO107_VPAC270_PCMCIA_PPEN, + !(state->Vcc == 33 || state->Vcc == 50)); + } else { + gpio_set_value(GPIO16_VPAC270_CF_RESET, + (state->flags & SS_RESET)); + } + + return 0; +} + +static void vpac270_pcmcia_socket_init(struct soc_pcmcia_socket *skt) +{ +} + +static void vpac270_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) +{ +} + +static struct pcmcia_low_level vpac270_pcmcia_ops = { + .owner = THIS_MODULE, + + .first = 0, + .nr = 2, + + .hw_init = vpac270_pcmcia_hw_init, + .hw_shutdown = vpac270_pcmcia_hw_shutdown, + + .socket_state = vpac270_pcmcia_socket_state, + .configure_socket = vpac270_pcmcia_configure_socket, + + .socket_init = vpac270_pcmcia_socket_init, + .socket_suspend = vpac270_pcmcia_socket_suspend, +}; + +static struct platform_device *vpac270_pcmcia_device; + +static int __init vpac270_pcmcia_init(void) +{ + int ret; + + if (!machine_is_vpac270()) + return -ENODEV; + + vpac270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!vpac270_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(vpac270_pcmcia_device, + &vpac270_pcmcia_ops, sizeof(vpac270_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(vpac270_pcmcia_device); + + if (ret) + platform_device_put(vpac270_pcmcia_device); + + return ret; +} + +static void __exit vpac270_pcmcia_exit(void) +{ + platform_device_unregister(vpac270_pcmcia_device); +} + +module_init(vpac270_pcmcia_init); +module_exit(vpac270_pcmcia_exit); + +MODULE_AUTHOR("Marek Vasut "); +MODULE_DESCRIPTION("PCMCIA support for Voipac PXA270"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 35bb44af49b3..100e4d9372f1 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -274,26 +274,6 @@ static void pnpacpi_parse_allocated_busresource(struct pnp_dev *dev, pnp_add_bus_resource(dev, start, end); } -static u64 addr_space_length(struct pnp_dev *dev, u64 min, u64 max, u64 len) -{ - u64 max_len; - - max_len = max - min + 1; - if (len <= max_len) - return len; - - /* - * Per 6.4.3.5, _LEN cannot exceed _MAX - _MIN + 1, but some BIOSes - * don't do this correctly, e.g., - * https://bugzilla.kernel.org/show_bug.cgi?id=15480 - */ - dev_info(&dev->dev, - "resource length %#llx doesn't fit in %#llx-%#llx, trimming\n", - (unsigned long long) len, (unsigned long long) min, - (unsigned long long) max); - return max_len; -} - static void pnpacpi_parse_allocated_address_space(struct pnp_dev *dev, struct acpi_resource *res) { @@ -309,7 +289,8 @@ static void pnpacpi_parse_allocated_address_space(struct pnp_dev *dev, return; } - len = addr_space_length(dev, p->minimum, p->maximum, p->address_length); + /* Windows apparently computes length rather than using _LEN */ + len = p->maximum - p->minimum + 1; window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0; if (p->resource_type == ACPI_MEMORY_RANGE) @@ -330,7 +311,8 @@ static void pnpacpi_parse_allocated_ext_address_space(struct pnp_dev *dev, int window; u64 len; - len = addr_space_length(dev, p->minimum, p->maximum, p->address_length); + /* Windows apparently computes length rather than using _LEN */ + len = p->maximum - p->minimum + 1; window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0; if (p->resource_type == ACPI_MEMORY_RANGE) diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c index 2e54e6a23c72..e3446ab8b563 100644 --- a/drivers/pnp/resource.c +++ b/drivers/pnp/resource.c @@ -211,6 +211,8 @@ int pnp_check_port(struct pnp_dev *dev, struct resource *res) if (tres->flags & IORESOURCE_IO) { if (cannot_compare(tres->flags)) continue; + if (tres->flags & IORESOURCE_WINDOW) + continue; tport = &tres->start; tend = &tres->end; if (ranged_conflict(port, end, tport, tend)) @@ -271,6 +273,8 @@ int pnp_check_mem(struct pnp_dev *dev, struct resource *res) if (tres->flags & IORESOURCE_MEM) { if (cannot_compare(tres->flags)) continue; + if (tres->flags & IORESOURCE_WINDOW) + continue; taddr = &tres->start; tend = &tres->end; if (ranged_conflict(addr, end, taddr, tend)) diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 9201afe65609..7f87979da22d 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -4724,6 +4724,10 @@ static ushort AscInitMicroCodeVar(ASC_DVC_VAR *asc_dvc) BUG_ON((unsigned long)asc_dvc->overrun_buf & 7); asc_dvc->overrun_dma = dma_map_single(board->dev, asc_dvc->overrun_buf, ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(board->dev, asc_dvc->overrun_dma)) { + warn_code = -ENOMEM; + goto err_dma_map; + } phy_addr = cpu_to_le32(asc_dvc->overrun_dma); AscMemDWordCopyPtrToLram(iop_base, ASCV_OVERRUN_PADDR_D, (uchar *)&phy_addr, 1); @@ -4739,14 +4743,23 @@ static ushort AscInitMicroCodeVar(ASC_DVC_VAR *asc_dvc) AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR); if (AscGetPCAddr(iop_base) != ASC_MCODE_START_ADDR) { asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR; - return warn_code; + warn_code = UW_ERR; + goto err_mcode_start; } if (AscStartChip(iop_base) != 1) { asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP; - return warn_code; + warn_code = UW_ERR; + goto err_mcode_start; } return warn_code; + +err_mcode_start: + dma_unmap_single(board->dev, asc_dvc->overrun_dma, + ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE); +err_dma_map: + asc_dvc->overrun_dma = 0; + return warn_code; } static ushort AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc) @@ -4802,6 +4815,8 @@ static ushort AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc) } release_firmware(fw); warn_code |= AscInitMicroCodeVar(asc_dvc); + if (!asc_dvc->overrun_dma) + return warn_code; asc_dvc->init_state |= ASC_INIT_STATE_END_LOAD_MC; AscEnableInterrupt(iop_base); return warn_code; @@ -7978,9 +7993,10 @@ static int advansys_reset(struct scsi_cmnd *scp) status = AscInitAsc1000Driver(asc_dvc); /* Refer to ASC_IERR_* definitions for meaning of 'err_code'. */ - if (asc_dvc->err_code) { + if (asc_dvc->err_code || !asc_dvc->overrun_dma) { scmd_printk(KERN_INFO, scp, "SCSI bus reset error: " - "0x%x\n", asc_dvc->err_code); + "0x%x, status: 0x%x\n", asc_dvc->err_code, + status); ret = FAILED; } else if (status) { scmd_printk(KERN_INFO, scp, "SCSI bus reset warning: " @@ -12311,7 +12327,7 @@ static int __devinit advansys_board_found(struct Scsi_Host *shost, asc_dvc_varp->overrun_buf = kzalloc(ASC_OVERRUN_BSIZE, GFP_KERNEL); if (!asc_dvc_varp->overrun_buf) { ret = -ENOMEM; - goto err_free_wide_mem; + goto err_free_irq; } warn_code = AscInitAsc1000Driver(asc_dvc_varp); @@ -12320,30 +12336,36 @@ static int __devinit advansys_board_found(struct Scsi_Host *shost, "warn 0x%x, error 0x%x\n", asc_dvc_varp->init_state, warn_code, asc_dvc_varp->err_code); - if (asc_dvc_varp->err_code) { + if (!asc_dvc_varp->overrun_dma) { ret = -ENODEV; - kfree(asc_dvc_varp->overrun_buf); + goto err_free_mem; } } } else { - if (advansys_wide_init_chip(shost)) + if (advansys_wide_init_chip(shost)) { ret = -ENODEV; + goto err_free_mem; + } } - if (ret) - goto err_free_wide_mem; - ASC_DBG_PRT_SCSI_HOST(2, shost); ret = scsi_add_host(shost, boardp->dev); if (ret) - goto err_free_wide_mem; + goto err_free_mem; scsi_scan_host(shost); return 0; - err_free_wide_mem: - advansys_wide_free_mem(boardp); + err_free_mem: + if (ASC_NARROW_BOARD(boardp)) { + if (asc_dvc_varp->overrun_dma) + dma_unmap_single(boardp->dev, asc_dvc_varp->overrun_dma, + ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE); + kfree(asc_dvc_varp->overrun_buf); + } else + advansys_wide_free_mem(boardp); + err_free_irq: free_irq(boardp->irq, shost); err_free_dma: #ifdef CONFIG_ISA diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 6d5ae4474bb3..633e09036357 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -471,12 +471,12 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_task *task) WARN_ON(hdrlength >= 256); hdr->hlength = hdrlength & 0xFF; + hdr->cmdsn = task->cmdsn = cpu_to_be32(session->cmdsn); if (session->tt->init_task && session->tt->init_task(task)) return -EIO; task->state = ISCSI_TASK_RUNNING; - hdr->cmdsn = task->cmdsn = cpu_to_be32(session->cmdsn); session->cmdsn++; conn->scsicmd_pdus_cnt++; diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index b00efd19aadb..88f744672576 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -395,11 +395,15 @@ int sas_ata_init_host_and_port(struct domain_device *found_dev, void sas_ata_task_abort(struct sas_task *task) { struct ata_queued_cmd *qc = task->uldd_task; + struct request_queue *q = qc->scsicmd->device->request_queue; struct completion *waiting; + unsigned long flags; /* Bounce SCSI-initiated commands to the SCSI EH */ if (qc->scsicmd) { + spin_lock_irqsave(q->queue_lock, flags); blk_abort_request(qc->scsicmd->request); + spin_unlock_irqrestore(q->queue_lock, flags); scsi_schedule_eh(qc->scsicmd->device->host); return; } diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 2660e1b4569a..822835055cef 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -1030,6 +1030,8 @@ int __sas_task_abort(struct sas_task *task) void sas_task_abort(struct sas_task *task) { struct scsi_cmnd *sc = task->uldd_task; + struct request_queue *q = sc->device->request_queue; + unsigned long flags; /* Escape for libsas internal commands */ if (!sc) { @@ -1044,7 +1046,9 @@ void sas_task_abort(struct sas_task *task) return; } + spin_lock_irqsave(q->queue_lock, flags); blk_abort_request(sc->request); + spin_unlock_irqrestore(q->queue_lock, flags); scsi_schedule_eh(sc->device->host); } diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 3e10c306de94..3a5bfd10b2cb 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -957,7 +957,8 @@ static int resp_start_stop(struct scsi_cmnd * scp, static sector_t get_sdebug_capacity(void) { if (scsi_debug_virtual_gb > 0) - return 2048 * 1024 * (sector_t)scsi_debug_virtual_gb; + return (sector_t)scsi_debug_virtual_gb * + (1073741824 / scsi_debug_sector_size); else return sdebug_store_sectors; } diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index d45c69ca5737..7ad53fa42766 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -302,7 +302,20 @@ static int scsi_check_sense(struct scsi_cmnd *scmd) if (scmd->device->allow_restart && (sshdr.asc == 0x04) && (sshdr.ascq == 0x02)) return FAILED; - return SUCCESS; + + if (blk_barrier_rq(scmd->request)) + /* + * barrier requests should always retry on UA + * otherwise block will get a spurious error + */ + return NEEDS_RETRY; + else + /* + * for normal (non barrier) commands, pass the + * UA upwards for a determination in the + * completion functions + */ + return SUCCESS; /* these three are not supported */ case COPY_ABORTED: diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 8b827f37b03e..de6c60320f6f 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1040,6 +1040,7 @@ static void sd_prepare_flush(struct request_queue *q, struct request *rq) { rq->cmd_type = REQ_TYPE_BLOCK_PC; rq->timeout = SD_TIMEOUT; + rq->retries = SD_MAX_RETRIES; rq->cmd[0] = SYNCHRONIZE_CACHE; rq->cmd_len = 10; } diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 36828358a4d8..e76b1afafe07 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -36,8 +36,7 @@ #include #include -#include -#include +#include #include MODULE_AUTHOR("Stephen Street"); @@ -1318,14 +1317,14 @@ static int setup(struct spi_device *spi) /* NOTE: PXA25x_SSP _could_ use external clocking ... */ if (drv_data->ssp_type != PXA25x_SSP) dev_dbg(&spi->dev, "%ld Hz actual, %s\n", - clk_get_rate(ssp->clk) - / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), - chip->enable_dma ? "DMA" : "PIO"); + clk_get_rate(ssp->clk) + / (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)), + chip->enable_dma ? "DMA" : "PIO"); else dev_dbg(&spi->dev, "%ld Hz actual, %s\n", - clk_get_rate(ssp->clk) / 2 - / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), - chip->enable_dma ? "DMA" : "PIO"); + clk_get_rate(ssp->clk) / 2 + / (1 + ((chip->cr0 & SSCR0_SCR(0x0ff)) >> 8)), + chip->enable_dma ? "DMA" : "PIO"); if (spi->bits_per_word <= 8) { chip->n_bytes = 1; @@ -1466,7 +1465,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) platform_info = dev->platform_data; - ssp = ssp_request(pdev->id, pdev->name); + ssp = pxa_ssp_request(pdev->id, pdev->name); if (ssp == NULL) { dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id); return -ENODEV; @@ -1476,7 +1475,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); if (!master) { dev_err(&pdev->dev, "cannot alloc spi_master\n"); - ssp_free(ssp); + pxa_ssp_free(ssp); return -ENOMEM; } drv_data = spi_master_get_devdata(master); @@ -1558,7 +1557,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) write_SSCR1(SSCR1_RxTresh(RX_THRESH_DFLT) | SSCR1_TxTresh(TX_THRESH_DFLT), drv_data->ioaddr); - write_SSCR0(SSCR0_SerClkDiv(2) + write_SSCR0(SSCR0_SCR(2) | SSCR0_Motorola | SSCR0_DataSize(8), drv_data->ioaddr); @@ -1605,7 +1604,7 @@ out_error_irq_alloc: out_error_master_alloc: spi_master_put(master); - ssp_free(ssp); + pxa_ssp_free(ssp); return status; } @@ -1649,7 +1648,7 @@ static int pxa2xx_spi_remove(struct platform_device *pdev) free_irq(ssp->irq, drv_data); /* Release SSP */ - ssp_free(ssp); + pxa_ssp_free(ssp); /* Disconnect from the SPI framework */ spi_unregister_master(drv_data->master); diff --git a/drivers/staging/octeon/cvmx-helper-board.c b/drivers/staging/octeon/cvmx-helper-board.c index 3085e38a6f99..00a555b83354 100644 --- a/drivers/staging/octeon/cvmx-helper-board.c +++ b/drivers/staging/octeon/cvmx-helper-board.c @@ -153,6 +153,14 @@ int cvmx_helper_board_get_mii_address(int ipd_port) * through switch. */ return -1; + + case CVMX_BOARD_TYPE_CUST_WSX16: + if (ipd_port >= 0 && ipd_port <= 3) + return ipd_port; + else if (ipd_port >= 16 && ipd_port <= 19) + return ipd_port - 16 + 4; + else + return -1; } /* Some unknown board. Somebody forgot to update this function... */ diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index e14bd0749129..e8c769944812 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -695,6 +695,7 @@ static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev, * 1) Enable Runtime PM * 2) Force Runtime PM Resume since hardware is accessed from probe() */ + priv->dev = &pdev->dev; pm_runtime_enable(priv->dev); pm_runtime_resume(priv->dev); return 0; @@ -957,25 +958,24 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev) if (!pdev->dev.platform_data) { dev_err(&pdev->dev, "no platform data defined\n"); - error = -EINVAL; - goto err0; + return -EINVAL; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); i = platform_get_irq(pdev, 0); if (!res || i < 0) { dev_err(&pdev->dev, "cannot get platform resources\n"); - error = -ENOENT; - goto err0; + return -ENOENT; } priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) { dev_err(&pdev->dev, "cannot allocate device data\n"); - error = -ENOMEM; - goto err0; + return -ENOMEM; } + platform_set_drvdata(pdev, priv); + error = request_irq(i, sh_mobile_lcdc_irq, IRQF_DISABLED, dev_name(&pdev->dev), priv); if (error) { @@ -984,8 +984,6 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev) } priv->irq = i; - priv->dev = &pdev->dev; - platform_set_drvdata(pdev, priv); pdata = pdev->dev.platform_data; j = 0; @@ -1099,9 +1097,9 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev) info = ch->info; if (info->fbdefio) { - priv->ch->sglist = vmalloc(sizeof(struct scatterlist) * + ch->sglist = vmalloc(sizeof(struct scatterlist) * info->fix.smem_len >> PAGE_SHIFT); - if (!priv->ch->sglist) { + if (!ch->sglist) { dev_err(&pdev->dev, "cannot allocate sglist\n"); goto err1; } @@ -1126,9 +1124,9 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev) } return 0; - err1: +err1: sh_mobile_lcdc_remove(pdev); - err0: + return error; } @@ -1139,7 +1137,7 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev) int i; for (i = 0; i < ARRAY_SIZE(priv->ch); i++) - if (priv->ch[i].info->dev) + if (priv->ch[i].info && priv->ch[i].info->dev) unregister_framebuffer(priv->ch[i].info); sh_mobile_lcdc_stop(priv); @@ -1162,7 +1160,8 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev) if (priv->dot_clk) clk_put(priv->dot_clk); - pm_runtime_disable(priv->dev); + if (priv->dev) + pm_runtime_disable(priv->dev); if (priv->base) iounmap(priv->base); diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c index 88ed54e50f74..59359c9a5e01 100644 --- a/drivers/watchdog/ep93xx_wdt.c +++ b/drivers/watchdog/ep93xx_wdt.c @@ -244,7 +244,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" - __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + __MODULE_STRING(WDT_TIMEOUT) ")"); MODULE_AUTHOR("Ray Lehtiniemi ," "Alessandro Zummo "); diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c index 412593703d1e..4b42c2bb603f 100644 --- a/fs/ceph/addr.c +++ b/fs/ceph/addr.c @@ -509,7 +509,7 @@ static void writepages_finish(struct ceph_osd_request *req, u64 bytes = 0; struct ceph_client *client = ceph_inode_to_client(inode); long writeback_stat; - unsigned issued = __ceph_caps_issued(ci, NULL); + unsigned issued = ceph_caps_issued(ci); /* parse reply */ replyhead = msg->front.iov_base; diff --git a/fs/ceph/auth.c b/fs/ceph/auth.c index f6394b94b866..818afe72e6c7 100644 --- a/fs/ceph/auth.c +++ b/fs/ceph/auth.c @@ -3,6 +3,7 @@ #include #include #include +#include #include "types.h" #include "auth_none.h" diff --git a/fs/ceph/auth_none.h b/fs/ceph/auth_none.h index 56c05533a31c..8164df1a08be 100644 --- a/fs/ceph/auth_none.h +++ b/fs/ceph/auth_none.h @@ -1,6 +1,8 @@ #ifndef _FS_CEPH_AUTH_NONE_H #define _FS_CEPH_AUTH_NONE_H +#include + #include "auth.h" /* diff --git a/fs/ceph/auth_x.c b/fs/ceph/auth_x.c index d9001a4dc8cc..fee5a08da881 100644 --- a/fs/ceph/auth_x.c +++ b/fs/ceph/auth_x.c @@ -12,8 +12,6 @@ #include "auth.h" #include "decode.h" -struct kmem_cache *ceph_x_ticketbuf_cachep; - #define TEMP_TICKET_BUF_LEN 256 static void ceph_x_validate_tickets(struct ceph_auth_client *ac, int *pneed); @@ -131,13 +129,12 @@ static int ceph_x_proc_ticket_reply(struct ceph_auth_client *ac, char *ticket_buf; u8 struct_v; - dbuf = kmem_cache_alloc(ceph_x_ticketbuf_cachep, GFP_NOFS | GFP_ATOMIC); + dbuf = kmalloc(TEMP_TICKET_BUF_LEN, GFP_NOFS); if (!dbuf) return -ENOMEM; ret = -ENOMEM; - ticket_buf = kmem_cache_alloc(ceph_x_ticketbuf_cachep, - GFP_NOFS | GFP_ATOMIC); + ticket_buf = kmalloc(TEMP_TICKET_BUF_LEN, GFP_NOFS); if (!ticket_buf) goto out_dbuf; @@ -251,9 +248,9 @@ static int ceph_x_proc_ticket_reply(struct ceph_auth_client *ac, ret = 0; out: - kmem_cache_free(ceph_x_ticketbuf_cachep, ticket_buf); + kfree(ticket_buf); out_dbuf: - kmem_cache_free(ceph_x_ticketbuf_cachep, dbuf); + kfree(dbuf); return ret; bad: @@ -605,8 +602,6 @@ static void ceph_x_destroy(struct ceph_auth_client *ac) remove_ticket_handler(ac, th); } - kmem_cache_destroy(ceph_x_ticketbuf_cachep); - kfree(ac->private); ac->private = NULL; } @@ -641,26 +636,20 @@ int ceph_x_init(struct ceph_auth_client *ac) int ret; dout("ceph_x_init %p\n", ac); + ret = -ENOMEM; xi = kzalloc(sizeof(*xi), GFP_NOFS); if (!xi) - return -ENOMEM; + goto out; - ret = -ENOMEM; - ceph_x_ticketbuf_cachep = kmem_cache_create("ceph_x_ticketbuf", - TEMP_TICKET_BUF_LEN, 8, - (SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD), - NULL); - if (!ceph_x_ticketbuf_cachep) - goto done_nomem; ret = -EINVAL; if (!ac->secret) { pr_err("no secret set (for auth_x protocol)\n"); - goto done_nomem; + goto out_nomem; } ret = ceph_crypto_key_unarmor(&xi->secret, ac->secret); if (ret) - goto done_nomem; + goto out_nomem; xi->starting = true; xi->ticket_handlers = RB_ROOT; @@ -670,10 +659,9 @@ int ceph_x_init(struct ceph_auth_client *ac) ac->ops = &ceph_x_ops; return 0; -done_nomem: +out_nomem: kfree(xi); - if (ceph_x_ticketbuf_cachep) - kmem_cache_destroy(ceph_x_ticketbuf_cachep); +out: return ret; } diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index aa2239fa9a3b..0c1681806867 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -1861,8 +1861,8 @@ static void kick_flushing_capsnaps(struct ceph_mds_client *mdsc, } else { pr_err("%p auth cap %p not mds%d ???\n", inode, cap, session->s_mds); - spin_unlock(&inode->i_lock); } + spin_unlock(&inode->i_lock); } } diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c index ea8ee2e526aa..650d2db5ed26 100644 --- a/fs/ceph/dir.c +++ b/fs/ceph/dir.c @@ -880,7 +880,16 @@ static int ceph_rename(struct inode *old_dir, struct dentry *old_dentry, * do_request, above). If there is no trace, we need * to do it here. */ + + /* d_move screws up d_subdirs order */ + ceph_i_clear(new_dir, CEPH_I_COMPLETE); + d_move(old_dentry, new_dentry); + + /* ensure target dentry is invalidated, despite + rehashing bug in vfs_rename_dir */ + new_dentry->d_time = jiffies; + ceph_dentry(new_dentry)->lease_shared_gen = 0; } ceph_mdsc_put_request(req); return err; diff --git a/fs/ceph/file.c b/fs/ceph/file.c index 4add3d5da2c1..ed6f19721d6e 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -665,7 +665,8 @@ more: * throw out any page cache pages in this range. this * may block. */ - truncate_inode_pages_range(inode->i_mapping, pos, pos+len); + truncate_inode_pages_range(inode->i_mapping, pos, + (pos+len) | (PAGE_CACHE_SIZE-1)); } else { pages = alloc_page_vector(num_pages); if (IS_ERR(pages)) { diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index 26f883c275e8..261f3e6c0bcf 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -997,6 +997,10 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req, dn, dn->d_name.len, dn->d_name.name); dout("fill_trace doing d_move %p -> %p\n", req->r_old_dentry, dn); + + /* d_move screws up d_subdirs order */ + ceph_i_clear(dir, CEPH_I_COMPLETE); + d_move(req->r_old_dentry, dn); dout(" src %p '%.*s' dst %p '%.*s'\n", req->r_old_dentry, diff --git a/fs/ceph/messenger.c b/fs/ceph/messenger.c index cdaaa131add3..509f57d9ccb3 100644 --- a/fs/ceph/messenger.c +++ b/fs/ceph/messenger.c @@ -1334,6 +1334,7 @@ static int read_partial_message(struct ceph_connection *con) unsigned front_len, middle_len, data_len, data_off; int datacrc = con->msgr->nocrc; int skip; + u64 seq; dout("read_partial_message con %p msg %p\n", con, m); @@ -1368,6 +1369,25 @@ static int read_partial_message(struct ceph_connection *con) return -EIO; data_off = le16_to_cpu(con->in_hdr.data_off); + /* verify seq# */ + seq = le64_to_cpu(con->in_hdr.seq); + if ((s64)seq - (s64)con->in_seq < 1) { + pr_info("skipping %s%lld %s seq %lld, expected %lld\n", + ENTITY_NAME(con->peer_name), + pr_addr(&con->peer_addr.in_addr), + seq, con->in_seq + 1); + con->in_base_pos = -front_len - middle_len - data_len - + sizeof(m->footer); + con->in_tag = CEPH_MSGR_TAG_READY; + con->in_seq++; + return 0; + } else if ((s64)seq - (s64)con->in_seq > 1) { + pr_err("read_partial_message bad seq %lld expected %lld\n", + seq, con->in_seq + 1); + con->error_msg = "bad message sequence # for incoming message"; + return -EBADMSG; + } + /* allocate message? */ if (!con->in_msg) { dout("got hdr type %d front %d data %d\n", con->in_hdr.type, @@ -1379,6 +1399,7 @@ static int read_partial_message(struct ceph_connection *con) con->in_base_pos = -front_len - middle_len - data_len - sizeof(m->footer); con->in_tag = CEPH_MSGR_TAG_READY; + con->in_seq++; return 0; } if (IS_ERR(con->in_msg)) { @@ -2030,6 +2051,7 @@ void ceph_con_revoke_message(struct ceph_connection *con, struct ceph_msg *msg) ceph_msg_put(con->in_msg); con->in_msg = NULL; con->in_tag = CEPH_MSGR_TAG_READY; + con->in_seq++; } else { dout("con_revoke_pages %p msg %p pages %p no-op\n", con, con->in_msg, msg); diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c index 2b881262ef67..d5114db70453 100644 --- a/fs/ceph/snap.c +++ b/fs/ceph/snap.c @@ -869,16 +869,20 @@ skip_inode: continue; ci = ceph_inode(inode); spin_lock(&inode->i_lock); - if (!ci->i_snap_realm) - goto split_skip_inode; - ceph_put_snap_realm(mdsc, ci->i_snap_realm); - spin_lock(&realm->inodes_with_caps_lock); - list_add(&ci->i_snap_realm_item, - &realm->inodes_with_caps); - ci->i_snap_realm = realm; - spin_unlock(&realm->inodes_with_caps_lock); - ceph_get_snap_realm(mdsc, realm); -split_skip_inode: + if (list_empty(&ci->i_snap_realm_item)) { + struct ceph_snap_realm *oldrealm = + ci->i_snap_realm; + + dout(" moving %p to split realm %llx %p\n", + inode, realm->ino, realm); + spin_lock(&realm->inodes_with_caps_lock); + list_add(&ci->i_snap_realm_item, + &realm->inodes_with_caps); + ci->i_snap_realm = realm; + spin_unlock(&realm->inodes_with_caps_lock); + ceph_get_snap_realm(mdsc, realm); + ceph_put_snap_realm(mdsc, oldrealm); + } spin_unlock(&inode->i_lock); iput(inode); } diff --git a/fs/ceph/super.c b/fs/ceph/super.c index 75d02eaa1279..f888cf487b7c 100644 --- a/fs/ceph/super.c +++ b/fs/ceph/super.c @@ -996,9 +996,10 @@ static int __init init_ceph(void) if (ret) goto out_icache; - pr_info("loaded %d.%d.%d (mon/mds/osd proto %d/%d/%d)\n", - CEPH_VERSION_MAJOR, CEPH_VERSION_MINOR, CEPH_VERSION_PATCH, - CEPH_MONC_PROTOCOL, CEPH_MDSC_PROTOCOL, CEPH_OSDC_PROTOCOL); + pr_info("loaded (mon/mds/osd proto %d/%d/%d, osdmap %d/%d %d/%d)\n", + CEPH_MONC_PROTOCOL, CEPH_MDSC_PROTOCOL, CEPH_OSDC_PROTOCOL, + CEPH_OSDMAP_VERSION, CEPH_OSDMAP_VERSION_EXT, + CEPH_OSDMAP_INC_VERSION, CEPH_OSDMAP_INC_VERSION_EXT); return 0; out_icache: diff --git a/fs/ceph/super.h b/fs/ceph/super.h index e30dfbb056c3..13513b80d87f 100644 --- a/fs/ceph/super.h +++ b/fs/ceph/super.h @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c index 15671245c6ee..ea61d26e7871 100644 --- a/fs/nfs/delegation.c +++ b/fs/nfs/delegation.c @@ -24,6 +24,8 @@ static void nfs_do_free_delegation(struct nfs_delegation *delegation) { + if (delegation->cred) + put_rpccred(delegation->cred); kfree(delegation); } @@ -36,13 +38,7 @@ static void nfs_free_delegation_callback(struct rcu_head *head) static void nfs_free_delegation(struct nfs_delegation *delegation) { - struct rpc_cred *cred; - - cred = rcu_dereference(delegation->cred); - rcu_assign_pointer(delegation->cred, NULL); call_rcu(&delegation->rcu, nfs_free_delegation_callback); - if (cred) - put_rpccred(cred); } void nfs_mark_delegation_referenced(struct nfs_delegation *delegation) @@ -129,21 +125,35 @@ again: */ void nfs_inode_reclaim_delegation(struct inode *inode, struct rpc_cred *cred, struct nfs_openres *res) { - struct nfs_delegation *delegation = NFS_I(inode)->delegation; - struct rpc_cred *oldcred; + struct nfs_delegation *delegation; + struct rpc_cred *oldcred = NULL; - if (delegation == NULL) - return; - memcpy(delegation->stateid.data, res->delegation.data, - sizeof(delegation->stateid.data)); - delegation->type = res->delegation_type; - delegation->maxsize = res->maxsize; - oldcred = delegation->cred; - delegation->cred = get_rpccred(cred); - clear_bit(NFS_DELEGATION_NEED_RECLAIM, &delegation->flags); - NFS_I(inode)->delegation_state = delegation->type; - smp_wmb(); - put_rpccred(oldcred); + rcu_read_lock(); + delegation = rcu_dereference(NFS_I(inode)->delegation); + if (delegation != NULL) { + spin_lock(&delegation->lock); + if (delegation->inode != NULL) { + memcpy(delegation->stateid.data, res->delegation.data, + sizeof(delegation->stateid.data)); + delegation->type = res->delegation_type; + delegation->maxsize = res->maxsize; + oldcred = delegation->cred; + delegation->cred = get_rpccred(cred); + clear_bit(NFS_DELEGATION_NEED_RECLAIM, + &delegation->flags); + NFS_I(inode)->delegation_state = delegation->type; + spin_unlock(&delegation->lock); + put_rpccred(oldcred); + rcu_read_unlock(); + } else { + /* We appear to have raced with a delegation return. */ + spin_unlock(&delegation->lock); + rcu_read_unlock(); + nfs_inode_set_delegation(inode, cred, res); + } + } else { + rcu_read_unlock(); + } } static int nfs_do_return_delegation(struct inode *inode, struct nfs_delegation *delegation, int issync) @@ -166,9 +176,13 @@ static struct inode *nfs_delegation_grab_inode(struct nfs_delegation *delegation return inode; } -static struct nfs_delegation *nfs_detach_delegation_locked(struct nfs_inode *nfsi, const nfs4_stateid *stateid) +static struct nfs_delegation *nfs_detach_delegation_locked(struct nfs_inode *nfsi, + const nfs4_stateid *stateid, + struct nfs_client *clp) { - struct nfs_delegation *delegation = rcu_dereference(nfsi->delegation); + struct nfs_delegation *delegation = + rcu_dereference_protected(nfsi->delegation, + lockdep_is_held(&clp->cl_lock)); if (delegation == NULL) goto nomatch; @@ -195,7 +209,7 @@ int nfs_inode_set_delegation(struct inode *inode, struct rpc_cred *cred, struct { struct nfs_client *clp = NFS_SERVER(inode)->nfs_client; struct nfs_inode *nfsi = NFS_I(inode); - struct nfs_delegation *delegation; + struct nfs_delegation *delegation, *old_delegation; struct nfs_delegation *freeme = NULL; int status = 0; @@ -213,10 +227,12 @@ int nfs_inode_set_delegation(struct inode *inode, struct rpc_cred *cred, struct spin_lock_init(&delegation->lock); spin_lock(&clp->cl_lock); - if (rcu_dereference(nfsi->delegation) != NULL) { - if (memcmp(&delegation->stateid, &nfsi->delegation->stateid, - sizeof(delegation->stateid)) == 0 && - delegation->type == nfsi->delegation->type) { + old_delegation = rcu_dereference_protected(nfsi->delegation, + lockdep_is_held(&clp->cl_lock)); + if (old_delegation != NULL) { + if (memcmp(&delegation->stateid, &old_delegation->stateid, + sizeof(old_delegation->stateid)) == 0 && + delegation->type == old_delegation->type) { goto out; } /* @@ -226,12 +242,12 @@ int nfs_inode_set_delegation(struct inode *inode, struct rpc_cred *cred, struct dfprintk(FILE, "%s: server %s handed out " "a duplicate delegation!\n", __func__, clp->cl_hostname); - if (delegation->type <= nfsi->delegation->type) { + if (delegation->type <= old_delegation->type) { freeme = delegation; delegation = NULL; goto out; } - freeme = nfs_detach_delegation_locked(nfsi, NULL); + freeme = nfs_detach_delegation_locked(nfsi, NULL, clp); } list_add_rcu(&delegation->super_list, &clp->cl_delegations); nfsi->delegation_state = delegation->type; @@ -301,7 +317,7 @@ restart: if (inode == NULL) continue; spin_lock(&clp->cl_lock); - delegation = nfs_detach_delegation_locked(NFS_I(inode), NULL); + delegation = nfs_detach_delegation_locked(NFS_I(inode), NULL, clp); spin_unlock(&clp->cl_lock); rcu_read_unlock(); if (delegation != NULL) { @@ -330,9 +346,9 @@ void nfs_inode_return_delegation_noreclaim(struct inode *inode) struct nfs_inode *nfsi = NFS_I(inode); struct nfs_delegation *delegation; - if (rcu_dereference(nfsi->delegation) != NULL) { + if (rcu_access_pointer(nfsi->delegation) != NULL) { spin_lock(&clp->cl_lock); - delegation = nfs_detach_delegation_locked(nfsi, NULL); + delegation = nfs_detach_delegation_locked(nfsi, NULL, clp); spin_unlock(&clp->cl_lock); if (delegation != NULL) nfs_do_return_delegation(inode, delegation, 0); @@ -346,9 +362,9 @@ int nfs_inode_return_delegation(struct inode *inode) struct nfs_delegation *delegation; int err = 0; - if (rcu_dereference(nfsi->delegation) != NULL) { + if (rcu_access_pointer(nfsi->delegation) != NULL) { spin_lock(&clp->cl_lock); - delegation = nfs_detach_delegation_locked(nfsi, NULL); + delegation = nfs_detach_delegation_locked(nfsi, NULL, clp); spin_unlock(&clp->cl_lock); if (delegation != NULL) { nfs_msync_inode(inode); @@ -526,7 +542,7 @@ restart: if (inode == NULL) continue; spin_lock(&clp->cl_lock); - delegation = nfs_detach_delegation_locked(NFS_I(inode), NULL); + delegation = nfs_detach_delegation_locked(NFS_I(inode), NULL, clp); spin_unlock(&clp->cl_lock); rcu_read_unlock(); if (delegation != NULL) diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c index 0cdbc5e7655a..48145f505a6a 100644 --- a/fs/nilfs2/super.c +++ b/fs/nilfs2/super.c @@ -749,6 +749,7 @@ nilfs_fill_super(struct super_block *sb, void *data, int silent, sb->s_export_op = &nilfs_export_ops; sb->s_root = NULL; sb->s_time_gran = 1; + sb->s_bdi = nilfs->ns_bdi; err = load_nilfs(nilfs, sbi); if (err) diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c index ecebb2276790..f9d5d3ffc75a 100644 --- a/fs/ocfs2/buffer_head_io.c +++ b/fs/ocfs2/buffer_head_io.c @@ -406,6 +406,7 @@ int ocfs2_write_super_or_backup(struct ocfs2_super *osb, struct buffer_head *bh) { int ret = 0; + struct ocfs2_dinode *di = (struct ocfs2_dinode *)bh->b_data; mlog_entry_void(); @@ -425,6 +426,7 @@ int ocfs2_write_super_or_backup(struct ocfs2_super *osb, get_bh(bh); /* for end_buffer_write_sync() */ bh->b_end_io = end_buffer_write_sync; + ocfs2_compute_meta_ecc(osb->sb, bh->b_data, &di->i_check); submit_bh(WRITE, bh); wait_on_buffer(bh); diff --git a/fs/ocfs2/dlm/dlmast.c b/fs/ocfs2/dlm/dlmast.c index a795eb91f4ea..12d5eb78a11a 100644 --- a/fs/ocfs2/dlm/dlmast.c +++ b/fs/ocfs2/dlm/dlmast.c @@ -184,9 +184,8 @@ static void dlm_update_lvb(struct dlm_ctxt *dlm, struct dlm_lock_resource *res, BUG_ON(!lksb); /* only updates if this node masters the lockres */ + spin_lock(&res->spinlock); if (res->owner == dlm->node_num) { - - spin_lock(&res->spinlock); /* check the lksb flags for the direction */ if (lksb->flags & DLM_LKSB_GET_LVB) { mlog(0, "getting lvb from lockres for %s node\n", @@ -201,8 +200,8 @@ static void dlm_update_lvb(struct dlm_ctxt *dlm, struct dlm_lock_resource *res, * here. In the future we might want to clear it at the time * the put is actually done. */ - spin_unlock(&res->spinlock); } + spin_unlock(&res->spinlock); /* reset any lvb flags on the lksb */ lksb->flags &= ~(DLM_LKSB_PUT_LVB|DLM_LKSB_GET_LVB); diff --git a/fs/ocfs2/dlmfs/dlmfs.c b/fs/ocfs2/dlmfs/dlmfs.c index 1b0de157a08c..b83d6107a1f5 100644 --- a/fs/ocfs2/dlmfs/dlmfs.c +++ b/fs/ocfs2/dlmfs/dlmfs.c @@ -112,20 +112,20 @@ MODULE_PARM_DESC(capabilities, DLMFS_CAPABILITIES); * O_RDONLY -> PRMODE level * O_WRONLY -> EXMODE level * - * O_NONBLOCK -> LKM_NOQUEUE + * O_NONBLOCK -> NOQUEUE */ static int dlmfs_decode_open_flags(int open_flags, int *level, int *flags) { if (open_flags & (O_WRONLY|O_RDWR)) - *level = LKM_EXMODE; + *level = DLM_LOCK_EX; else - *level = LKM_PRMODE; + *level = DLM_LOCK_PR; *flags = 0; if (open_flags & O_NONBLOCK) - *flags |= LKM_NOQUEUE; + *flags |= DLM_LKF_NOQUEUE; return 0; } @@ -166,7 +166,7 @@ static int dlmfs_file_open(struct inode *inode, * to be able userspace to be able to distinguish a * valid lock request from one that simply couldn't be * granted. */ - if (flags & LKM_NOQUEUE && status == -EAGAIN) + if (flags & DLM_LKF_NOQUEUE && status == -EAGAIN) status = -ETXTBSY; kfree(fp); goto bail; @@ -193,7 +193,7 @@ static int dlmfs_file_release(struct inode *inode, status = 0; if (fp) { level = fp->fp_lock_level; - if (level != LKM_IVMODE) + if (level != DLM_LOCK_IV) user_dlm_cluster_unlock(&ip->ip_lockres, level); kfree(fp); @@ -262,7 +262,7 @@ static ssize_t dlmfs_file_read(struct file *filp, if ((count + *ppos) > i_size_read(inode)) readlen = i_size_read(inode) - *ppos; else - readlen = count - *ppos; + readlen = count; lvb_buf = kmalloc(readlen, GFP_NOFS); if (!lvb_buf) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 17947dc8341e..a5fbd9cea968 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -684,6 +684,7 @@ restarted_transaction: if (why == RESTART_META) { mlog(0, "restarting function.\n"); restart_func = 1; + status = 0; } else { BUG_ON(why != RESTART_TRANS); @@ -1981,18 +1982,18 @@ relock: /* communicate with ocfs2_dio_end_io */ ocfs2_iocb_set_rw_locked(iocb, rw_level); + ret = generic_segment_checks(iov, &nr_segs, &ocount, + VERIFY_READ); + if (ret) + goto out_dio; + + count = ocount; + ret = generic_write_checks(file, ppos, &count, + S_ISBLK(inode->i_mode)); + if (ret) + goto out_dio; + if (direct_io) { - ret = generic_segment_checks(iov, &nr_segs, &ocount, - VERIFY_READ); - if (ret) - goto out_dio; - - count = ocount; - ret = generic_write_checks(file, ppos, &count, - S_ISBLK(inode->i_mode)); - if (ret) - goto out_dio; - written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos, ppos, count, ocount); if (written < 0) { @@ -2007,7 +2008,10 @@ relock: goto out_dio; } } else { - written = __generic_file_aio_write(iocb, iov, nr_segs, ppos); + current->backing_dev_info = file->f_mapping->backing_dev_info; + written = generic_file_buffered_write(iocb, iov, nr_segs, *ppos, + ppos, count, 0); + current->backing_dev_info = NULL; } out_dio: @@ -2021,9 +2025,9 @@ out_dio: if (ret < 0) written = ret; - if (!ret && (old_size != i_size_read(inode) || - old_clusters != OCFS2_I(inode)->ip_clusters || - has_refcount)) { + if (!ret && ((old_size != i_size_read(inode)) || + (old_clusters != OCFS2_I(inode)->ip_clusters) || + has_refcount)) { ret = jbd2_journal_force_commit(osb->journal->j_journal); if (ret < 0) written = ret; diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c index 07cc8bb68b6d..af189887201c 100644 --- a/fs/ocfs2/inode.c +++ b/fs/ocfs2/inode.c @@ -558,6 +558,7 @@ static int ocfs2_truncate_for_delete(struct ocfs2_super *osb, handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); if (IS_ERR(handle)) { status = PTR_ERR(handle); + handle = NULL; mlog_errno(status); goto out; } @@ -639,11 +640,13 @@ static int ocfs2_remove_inode(struct inode *inode, goto bail_unlock; } - status = ocfs2_orphan_del(osb, handle, orphan_dir_inode, inode, - orphan_dir_bh); - if (status < 0) { - mlog_errno(status); - goto bail_commit; + if (!(OCFS2_I(inode)->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR)) { + status = ocfs2_orphan_del(osb, handle, orphan_dir_inode, inode, + orphan_dir_bh); + if (status < 0) { + mlog_errno(status); + goto bail_commit; + } } /* set the inodes dtime */ @@ -722,38 +725,39 @@ static void ocfs2_signal_wipe_completion(struct ocfs2_super *osb, static int ocfs2_wipe_inode(struct inode *inode, struct buffer_head *di_bh) { - int status, orphaned_slot; + int status, orphaned_slot = -1; struct inode *orphan_dir_inode = NULL; struct buffer_head *orphan_dir_bh = NULL; struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); - struct ocfs2_dinode *di; + struct ocfs2_dinode *di = (struct ocfs2_dinode *) di_bh->b_data; - di = (struct ocfs2_dinode *) di_bh->b_data; - orphaned_slot = le16_to_cpu(di->i_orphaned_slot); + if (!(OCFS2_I(inode)->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR)) { + orphaned_slot = le16_to_cpu(di->i_orphaned_slot); - status = ocfs2_check_orphan_recovery_state(osb, orphaned_slot); - if (status) - return status; + status = ocfs2_check_orphan_recovery_state(osb, orphaned_slot); + if (status) + return status; - orphan_dir_inode = ocfs2_get_system_file_inode(osb, - ORPHAN_DIR_SYSTEM_INODE, - orphaned_slot); - if (!orphan_dir_inode) { - status = -EEXIST; - mlog_errno(status); - goto bail; - } + orphan_dir_inode = ocfs2_get_system_file_inode(osb, + ORPHAN_DIR_SYSTEM_INODE, + orphaned_slot); + if (!orphan_dir_inode) { + status = -EEXIST; + mlog_errno(status); + goto bail; + } - /* Lock the orphan dir. The lock will be held for the entire - * delete_inode operation. We do this now to avoid races with - * recovery completion on other nodes. */ - mutex_lock(&orphan_dir_inode->i_mutex); - status = ocfs2_inode_lock(orphan_dir_inode, &orphan_dir_bh, 1); - if (status < 0) { - mutex_unlock(&orphan_dir_inode->i_mutex); + /* Lock the orphan dir. The lock will be held for the entire + * delete_inode operation. We do this now to avoid races with + * recovery completion on other nodes. */ + mutex_lock(&orphan_dir_inode->i_mutex); + status = ocfs2_inode_lock(orphan_dir_inode, &orphan_dir_bh, 1); + if (status < 0) { + mutex_unlock(&orphan_dir_inode->i_mutex); - mlog_errno(status); - goto bail; + mlog_errno(status); + goto bail; + } } /* we do this while holding the orphan dir lock because we @@ -794,6 +798,9 @@ static int ocfs2_wipe_inode(struct inode *inode, mlog_errno(status); bail_unlock_dir: + if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR) + return status; + ocfs2_inode_unlock(orphan_dir_inode, 1); mutex_unlock(&orphan_dir_inode->i_mutex); brelse(orphan_dir_bh); @@ -889,7 +896,8 @@ static int ocfs2_query_inode_wipe(struct inode *inode, /* Do some basic inode verification... */ di = (struct ocfs2_dinode *) di_bh->b_data; - if (!(di->i_flags & cpu_to_le32(OCFS2_ORPHANED_FL))) { + if (!(di->i_flags & cpu_to_le32(OCFS2_ORPHANED_FL)) && + !(oi->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR)) { /* * Inodes in the orphan dir must have ORPHANED_FL. The only * inodes that come back out of the orphan dir are reflink diff --git a/fs/ocfs2/inode.h b/fs/ocfs2/inode.h index ba4fe07b293c..0b28e1921a39 100644 --- a/fs/ocfs2/inode.h +++ b/fs/ocfs2/inode.h @@ -100,6 +100,8 @@ struct ocfs2_inode_info #define OCFS2_INODE_MAYBE_ORPHANED 0x00000020 /* Does someone have the file open O_DIRECT */ #define OCFS2_INODE_OPEN_DIRECT 0x00000040 +/* Tell the inode wipe code it's not in orphan dir */ +#define OCFS2_INODE_SKIP_ORPHAN_DIR 0x00000080 static inline struct ocfs2_inode_info *OCFS2_I(struct inode *inode) { diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index b1eb50ae4097..4cbb18f26c5f 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -408,6 +408,19 @@ static int ocfs2_mknod(struct inode *dir, } } + /* + * Do this before adding the entry to the directory. We add + * also set d_op after success so that ->d_iput() will cleanup + * the dentry lock even if ocfs2_add_entry() fails below. + */ + status = ocfs2_dentry_attach_lock(dentry, inode, + OCFS2_I(dir)->ip_blkno); + if (status) { + mlog_errno(status); + goto leave; + } + dentry->d_op = &ocfs2_dentry_ops; + status = ocfs2_add_entry(handle, dentry, inode, OCFS2_I(inode)->ip_blkno, parent_fe_bh, &lookup); @@ -416,15 +429,7 @@ static int ocfs2_mknod(struct inode *dir, goto leave; } - status = ocfs2_dentry_attach_lock(dentry, inode, - OCFS2_I(dir)->ip_blkno); - if (status) { - mlog_errno(status); - goto leave; - } - insert_inode_hash(inode); - dentry->d_op = &ocfs2_dentry_ops; d_instantiate(dentry, inode); status = 0; leave: @@ -445,11 +450,6 @@ leave: ocfs2_free_dir_lookup_result(&lookup); - if ((status < 0) && inode) { - clear_nlink(inode); - iput(inode); - } - if (inode_ac) ocfs2_free_alloc_context(inode_ac); @@ -459,6 +459,17 @@ leave: if (meta_ac) ocfs2_free_alloc_context(meta_ac); + /* + * We should call iput after the i_mutex of the bitmap been + * unlocked in ocfs2_free_alloc_context, or the + * ocfs2_delete_inode will mutex_lock again. + */ + if ((status < 0) && inode) { + OCFS2_I(inode)->ip_flags |= OCFS2_INODE_SKIP_ORPHAN_DIR; + clear_nlink(inode); + iput(inode); + } + mlog_exit(status); return status; @@ -1771,6 +1782,18 @@ static int ocfs2_symlink(struct inode *dir, } } + /* + * Do this before adding the entry to the directory. We add + * also set d_op after success so that ->d_iput() will cleanup + * the dentry lock even if ocfs2_add_entry() fails below. + */ + status = ocfs2_dentry_attach_lock(dentry, inode, OCFS2_I(dir)->ip_blkno); + if (status) { + mlog_errno(status); + goto bail; + } + dentry->d_op = &ocfs2_dentry_ops; + status = ocfs2_add_entry(handle, dentry, inode, le64_to_cpu(fe->i_blkno), parent_fe_bh, &lookup); @@ -1779,14 +1802,7 @@ static int ocfs2_symlink(struct inode *dir, goto bail; } - status = ocfs2_dentry_attach_lock(dentry, inode, OCFS2_I(dir)->ip_blkno); - if (status) { - mlog_errno(status); - goto bail; - } - insert_inode_hash(inode); - dentry->d_op = &ocfs2_dentry_ops; d_instantiate(dentry, inode); bail: if (status < 0 && did_quota) @@ -1811,6 +1827,7 @@ bail: if (xattr_ac) ocfs2_free_alloc_context(xattr_ac); if ((status < 0) && inode) { + OCFS2_I(inode)->ip_flags |= OCFS2_INODE_SKIP_ORPHAN_DIR; clear_nlink(inode); iput(inode); } @@ -1976,6 +1993,7 @@ static int ocfs2_orphan_add(struct ocfs2_super *osb, } le32_add_cpu(&fe->i_flags, OCFS2_ORPHANED_FL); + OCFS2_I(inode)->ip_flags &= ~OCFS2_INODE_SKIP_ORPHAN_DIR; /* Record which orphan dir our inode now resides * in. delete_inode will use this to determine which orphan diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index bd96f6c7877e..5cbcd0f008fc 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -4083,6 +4083,9 @@ static int ocfs2_complete_reflink(struct inode *s_inode, di->i_attr = s_di->i_attr; if (preserve) { + t_inode->i_uid = s_inode->i_uid; + t_inode->i_gid = s_inode->i_gid; + t_inode->i_mode = s_inode->i_mode; di->i_uid = s_di->i_uid; di->i_gid = s_di->i_gid; di->i_mode = s_di->i_mode; diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h index e929c27ede22..6b9db917e717 100644 --- a/include/drm/ttm/ttm_bo_driver.h +++ b/include/drm/ttm/ttm_bo_driver.h @@ -789,34 +789,6 @@ extern void ttm_bo_unreserve(struct ttm_buffer_object *bo); extern int ttm_bo_wait_unreserved(struct ttm_buffer_object *bo, bool interruptible); -/** - * ttm_bo_block_reservation - * - * @bo: A pointer to a struct ttm_buffer_object. - * @interruptible: Use interruptible sleep when waiting. - * @no_wait: Don't sleep, but rather return -EBUSY. - * - * Block reservation for validation by simply reserving the buffer. - * This is intended for single buffer use only without eviction, - * and thus needs no deadlock protection. - * - * Returns: - * -EBUSY: If no_wait == 1 and the buffer is already reserved. - * -ERESTARTSYS: If interruptible == 1 and the process received a signal - * while sleeping. - */ -extern int ttm_bo_block_reservation(struct ttm_buffer_object *bo, - bool interruptible, bool no_wait); - -/** - * ttm_bo_unblock_reservation - * - * @bo: A pointer to a struct ttm_buffer_object. - * - * Unblocks reservation leaving lru lists untouched. - */ -extern void ttm_bo_unblock_reservation(struct ttm_buffer_object *bo); - /* * ttm_bo_util.c */ diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index b8ad1ea99586..8f78073d7caa 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -530,6 +530,7 @@ static inline struct cgroup_subsys_state *task_subsys_state( { return rcu_dereference_check(task->cgroups->subsys[subsys_id], rcu_read_lock_held() || + lockdep_is_held(&task->alloc_lock) || cgroup_lock_is_held()); } diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 0a5da639b327..6ed1d59bfb1e 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -355,6 +355,8 @@ struct i2c_adapter { int nr; char name[48]; struct completion dev_released; + + struct list_head userspace_clients; }; #define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev) diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 07db2feb8572..db266bbed23f 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -190,6 +190,8 @@ static inline int rcu_read_lock_sched_held(void) #ifdef CONFIG_PROVE_RCU +extern int rcu_my_thread_group_empty(void); + /** * rcu_dereference_check - rcu_dereference with debug checking * @p: The pointer to read, prior to dereferencing diff --git a/include/media/saa7146_vv.h b/include/media/saa7146_vv.h index b9da1f5591e7..4aeff96ff7d8 100644 --- a/include/media/saa7146_vv.h +++ b/include/media/saa7146_vv.h @@ -188,7 +188,6 @@ void saa7146_buffer_timeout(unsigned long data); void saa7146_dma_free(struct saa7146_dev* dev,struct videobuf_queue *q, struct saa7146_buf *buf); -int saa7146_vv_devinit(struct saa7146_dev *dev); int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv); int saa7146_vv_release(struct saa7146_dev* dev); diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index ff3017744711..597f8e27aaf6 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -778,6 +778,7 @@ int sctp_user_addto_chunk(struct sctp_chunk *chunk, int off, int len, struct iovec *data); void sctp_chunk_free(struct sctp_chunk *); void *sctp_addto_chunk(struct sctp_chunk *, int len, const void *data); +void *sctp_addto_chunk_fixed(struct sctp_chunk *, int len, const void *data); struct sctp_chunk *sctp_chunkify(struct sk_buff *, const struct sctp_association *, struct sock *); diff --git a/include/net/sock.h b/include/net/sock.h index b4603cd54fcd..1ad6435f252e 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -74,7 +74,7 @@ printk(KERN_DEBUG msg); } while (0) #else /* Validate arguments and do nothing */ -static void inline int __attribute__ ((format (printf, 2, 3))) +static inline void __attribute__ ((format (printf, 2, 3))) SOCK_DEBUG(struct sock *sk, const char *msg, ...) { } diff --git a/kernel/cgroup.c b/kernel/cgroup.c index e2769e13980c..3a53c771e503 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1646,7 +1646,9 @@ static inline struct cftype *__d_cft(struct dentry *dentry) int cgroup_path(const struct cgroup *cgrp, char *buf, int buflen) { char *start; - struct dentry *dentry = rcu_dereference(cgrp->dentry); + struct dentry *dentry = rcu_dereference_check(cgrp->dentry, + rcu_read_lock_held() || + cgroup_lock_is_held()); if (!dentry || cgrp == dummytop) { /* @@ -1662,13 +1664,17 @@ int cgroup_path(const struct cgroup *cgrp, char *buf, int buflen) *--start = '\0'; for (;;) { int len = dentry->d_name.len; + if ((start -= len) < buf) return -ENAMETOOLONG; - memcpy(start, cgrp->dentry->d_name.name, len); + memcpy(start, dentry->d_name.name, len); cgrp = cgrp->parent; if (!cgrp) break; - dentry = rcu_dereference(cgrp->dentry); + + dentry = rcu_dereference_check(cgrp->dentry, + rcu_read_lock_held() || + cgroup_lock_is_held()); if (!cgrp->parent) continue; if (--start < buf) @@ -4555,13 +4561,13 @@ static int alloc_css_id(struct cgroup_subsys *ss, struct cgroup *parent, { int subsys_id, i, depth = 0; struct cgroup_subsys_state *parent_css, *child_css; - struct css_id *child_id, *parent_id = NULL; + struct css_id *child_id, *parent_id; subsys_id = ss->subsys_id; parent_css = parent->subsys[subsys_id]; child_css = child->subsys[subsys_id]; - depth = css_depth(parent_css) + 1; parent_id = parent_css->id; + depth = parent_id->depth; child_id = get_new_cssid(ss, depth); if (IS_ERR(child_id)) diff --git a/kernel/cgroup_freezer.c b/kernel/cgroup_freezer.c index da5e13975531..e5c0244962b0 100644 --- a/kernel/cgroup_freezer.c +++ b/kernel/cgroup_freezer.c @@ -205,9 +205,12 @@ static void freezer_fork(struct cgroup_subsys *ss, struct task_struct *task) * No lock is needed, since the task isn't on tasklist yet, * so it can't be moved to another cgroup, which means the * freezer won't be removed and will be valid during this - * function call. + * function call. Nevertheless, apply RCU read-side critical + * section to suppress RCU lockdep false positives. */ + rcu_read_lock(); freezer = task_freezer(task); + rcu_read_unlock(); /* * The root cgroup is non-freezable, so we can skip the diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 2f3fbf84215a..3d1552d3c12b 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -4897,7 +4897,7 @@ err_fput_free_put_context: err_free_put_context: if (err < 0) - kfree(event); + free_event(event); err_put_context: if (err < 0) diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c index 03a7ea1579f6..49d808e833b0 100644 --- a/kernel/rcupdate.c +++ b/kernel/rcupdate.c @@ -122,3 +122,14 @@ void wakeme_after_rcu(struct rcu_head *head) rcu = container_of(head, struct rcu_synchronize, head); complete(&rcu->completion); } + +#ifdef CONFIG_PROVE_RCU +/* + * wrapper function to avoid #include problems. + */ +int rcu_my_thread_group_empty(void) +{ + return thread_group_empty(current); +} +EXPORT_SYMBOL_GPL(rcu_my_thread_group_empty); +#endif /* #ifdef CONFIG_PROVE_RCU */ diff --git a/kernel/sched.c b/kernel/sched.c index 6af210a7de70..3c2a54f70ffe 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -323,6 +323,15 @@ static inline struct task_group *task_group(struct task_struct *p) /* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */ static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { + /* + * Strictly speaking this rcu_read_lock() is not needed since the + * task_group is tied to the cgroup, which in turn can never go away + * as long as there are tasks attached to it. + * + * However since task_group() uses task_subsys_state() which is an + * rcu_dereference() user, this quiets CONFIG_PROVE_RCU. + */ + rcu_read_lock(); #ifdef CONFIG_FAIR_GROUP_SCHED p->se.cfs_rq = task_group(p)->cfs_rq[cpu]; p->se.parent = task_group(p)->se[cpu]; @@ -332,6 +341,7 @@ static inline void set_task_rq(struct task_struct *p, unsigned int cpu) p->rt.rt_rq = task_group(p)->rt_rq[cpu]; p->rt.parent = task_group(p)->rt_se[cpu]; #endif + rcu_read_unlock(); } #else @@ -3780,7 +3790,7 @@ int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner) * the mutex owner just released it and exited. */ if (probe_kernel_address(&owner->cpu, cpu)) - goto out; + return 0; #else cpu = owner->cpu; #endif @@ -3790,14 +3800,14 @@ int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner) * the cpu field may no longer be valid. */ if (cpu >= nr_cpumask_bits) - goto out; + return 0; /* * We need to validate that we can do a * get_cpu() and that we have the percpu area. */ if (!cpu_online(cpu)) - goto out; + return 0; rq = cpu_rq(cpu); @@ -3816,7 +3826,7 @@ int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner) cpu_relax(); } -out: + return 1; } #endif diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index 9b49db144037..19be00ba6123 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -114,7 +114,9 @@ print_task(struct seq_file *m, struct rq *rq, struct task_struct *p) { char path[64]; + rcu_read_lock(); cgroup_path(task_group(p)->css.cgroup, path, sizeof(path)); + rcu_read_unlock(); SEQ_printf(m, " %s", path); } #endif diff --git a/kernel/workqueue.c b/kernel/workqueue.c index dee48658805c..5bfb213984b2 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -774,7 +774,7 @@ void flush_delayed_work(struct delayed_work *dwork) { if (del_timer_sync(&dwork->timer)) { struct cpu_workqueue_struct *cwq; - cwq = wq_per_cpu(keventd_wq, get_cpu()); + cwq = wq_per_cpu(get_wq_data(&dwork->work)->wq, get_cpu()); __queue_work(cwq, &dwork->work); put_cpu(); } diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 6c755de385f7..0f711c213d2e 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -811,10 +811,12 @@ int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *mem) * enabled in "curr" and "curr" is a child of "mem" in *cgroup* * hierarchy(even if use_hierarchy is disabled in "mem"). */ + rcu_read_lock(); if (mem->use_hierarchy) ret = css_is_ancestor(&curr->css, &mem->css); else ret = (curr == mem); + rcu_read_unlock(); css_put(&curr->css); return ret; } @@ -2312,7 +2314,9 @@ mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout) /* record memcg information */ if (do_swap_account && swapout && memcg) { + rcu_read_lock(); swap_cgroup_record(ent, css_id(&memcg->css)); + rcu_read_unlock(); mem_cgroup_get(memcg); } if (swapout && memcg) @@ -2369,8 +2373,10 @@ static int mem_cgroup_move_swap_account(swp_entry_t entry, { unsigned short old_id, new_id; + rcu_read_lock(); old_id = css_id(&from->css); new_id = css_id(&to->css); + rcu_read_unlock(); if (swap_cgroup_cmpxchg(entry, old_id, new_id) == old_id) { mem_cgroup_swap_statistics(from, false); @@ -4038,11 +4044,16 @@ static int is_target_pte_for_mc(struct vm_area_struct *vma, put_page(page); } /* throught */ - if (ent.val && do_swap_account && !ret && - css_id(&mc.from->css) == lookup_swap_cgroup(ent)) { - ret = MC_TARGET_SWAP; - if (target) - target->ent = ent; + if (ent.val && do_swap_account && !ret) { + unsigned short id; + rcu_read_lock(); + id = css_id(&mc.from->css); + rcu_read_unlock(); + if (id == lookup_swap_cgroup(ent)) { + ret = MC_TARGET_SWAP; + if (target) + target->ent = ent; + } } return ret; } diff --git a/mm/slub.c b/mm/slub.c index 7d6c8b1ccf63..d2a54fe71ea2 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -2153,7 +2153,7 @@ static int init_kmem_cache_nodes(struct kmem_cache *s, gfp_t gfpflags) int local_node; if (slab_state >= UP && (s < kmalloc_caches || - s > kmalloc_caches + KMALLOC_CACHES)) + s >= kmalloc_caches + KMALLOC_CACHES)) local_node = page_to_nid(virt_to_page(s)); else local_node = 0; diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index 3192aa02ba5d..3f9e86b15e0d 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -200,7 +200,7 @@ lookup_protocol: inet_sk(sk)->pinet6 = np = inet6_sk_generic(sk); np->hop_limit = -1; - np->mcast_hops = -1; + np->mcast_hops = IPV6_DEFAULT_MCASTHOPS; np->mc_loop = 1; np->pmtudisc = IPV6_PMTUDISC_WANT; np->ipv6only = net->ipv6.sysctl.bindv6only; diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index 0fd5b4c88358..30c1767186b8 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -108,7 +108,7 @@ static const struct sctp_paramhdr prsctp_param = { cpu_to_be16(sizeof(struct sctp_paramhdr)), }; -/* A helper to initialize to initialize an op error inside a +/* A helper to initialize an op error inside a * provided chunk, as most cause codes will be embedded inside an * abort chunk. */ @@ -125,6 +125,29 @@ void sctp_init_cause(struct sctp_chunk *chunk, __be16 cause_code, chunk->subh.err_hdr = sctp_addto_chunk(chunk, sizeof(sctp_errhdr_t), &err); } +/* A helper to initialize an op error inside a + * provided chunk, as most cause codes will be embedded inside an + * abort chunk. Differs from sctp_init_cause in that it won't oops + * if there isn't enough space in the op error chunk + */ +int sctp_init_cause_fixed(struct sctp_chunk *chunk, __be16 cause_code, + size_t paylen) +{ + sctp_errhdr_t err; + __u16 len; + + /* Cause code constants are now defined in network order. */ + err.cause = cause_code; + len = sizeof(sctp_errhdr_t) + paylen; + err.length = htons(len); + + if (skb_tailroom(chunk->skb) > len) + return -ENOSPC; + chunk->subh.err_hdr = sctp_addto_chunk_fixed(chunk, + sizeof(sctp_errhdr_t), + &err); + return 0; +} /* 3.3.2 Initiation (INIT) (1) * * This chunk is used to initiate a SCTP association between two @@ -1132,6 +1155,24 @@ nodata: return retval; } +/* Create an Operation Error chunk of a fixed size, + * specifically, max(asoc->pathmtu, SCTP_DEFAULT_MAXSEGMENT) + * This is a helper function to allocate an error chunk for + * for those invalid parameter codes in which we may not want + * to report all the errors, if the incomming chunk is large + */ +static inline struct sctp_chunk *sctp_make_op_error_fixed( + const struct sctp_association *asoc, + const struct sctp_chunk *chunk) +{ + size_t size = asoc ? asoc->pathmtu : 0; + + if (!size) + size = SCTP_DEFAULT_MAXSEGMENT; + + return sctp_make_op_error_space(asoc, chunk, size); +} + /* Create an Operation Error chunk. */ struct sctp_chunk *sctp_make_op_error(const struct sctp_association *asoc, const struct sctp_chunk *chunk, @@ -1374,6 +1415,18 @@ void *sctp_addto_chunk(struct sctp_chunk *chunk, int len, const void *data) return target; } +/* Append bytes to the end of a chunk. Returns NULL if there isn't sufficient + * space in the chunk + */ +void *sctp_addto_chunk_fixed(struct sctp_chunk *chunk, + int len, const void *data) +{ + if (skb_tailroom(chunk->skb) > len) + return sctp_addto_chunk(chunk, len, data); + else + return NULL; +} + /* Append bytes from user space to the end of a chunk. Will panic if * chunk is not big enough. * Returns a kernel err value. @@ -1977,13 +2030,12 @@ static sctp_ierror_t sctp_process_unk_param(const struct sctp_association *asoc, * returning multiple unknown parameters. */ if (NULL == *errp) - *errp = sctp_make_op_error_space(asoc, chunk, - ntohs(chunk->chunk_hdr->length)); + *errp = sctp_make_op_error_fixed(asoc, chunk); if (*errp) { - sctp_init_cause(*errp, SCTP_ERROR_UNKNOWN_PARAM, + sctp_init_cause_fixed(*errp, SCTP_ERROR_UNKNOWN_PARAM, WORD_ROUND(ntohs(param.p->length))); - sctp_addto_chunk(*errp, + sctp_addto_chunk_fixed(*errp, WORD_ROUND(ntohs(param.p->length)), param.v); } else { diff --git a/security/keys/gc.c b/security/keys/gc.c index 19902319d097..a46e825cbf02 100644 --- a/security/keys/gc.c +++ b/security/keys/gc.c @@ -77,10 +77,10 @@ static bool key_gc_keyring(struct key *keyring, time_t limit) goto dont_gc; /* scan the keyring looking for dead keys */ - klist = rcu_dereference_check(keyring->payload.subscriptions, - lockdep_is_held(&key_serial_lock)); + rcu_read_lock(); + klist = rcu_dereference(keyring->payload.subscriptions); if (!klist) - goto dont_gc; + goto unlock_dont_gc; for (loop = klist->nkeys - 1; loop >= 0; loop--) { key = klist->keys[loop]; @@ -89,11 +89,14 @@ static bool key_gc_keyring(struct key *keyring, time_t limit) goto do_gc; } +unlock_dont_gc: + rcu_read_unlock(); dont_gc: kleave(" = false"); return false; do_gc: + rcu_read_unlock(); key_gc_cursor = keyring->serial; key_get(keyring); spin_unlock(&key_serial_lock); diff --git a/security/keys/keyring.c b/security/keys/keyring.c index dd7cd0f8e13c..1e4b0037935c 100644 --- a/security/keys/keyring.c +++ b/security/keys/keyring.c @@ -20,6 +20,11 @@ #include #include "internal.h" +#define rcu_dereference_locked_keyring(keyring) \ + (rcu_dereference_protected( \ + (keyring)->payload.subscriptions, \ + rwsem_is_locked((struct rw_semaphore *)&(keyring)->sem))) + /* * when plumbing the depths of the key tree, this sets a hard limit set on how * deep we're willing to go @@ -201,8 +206,7 @@ static long keyring_read(const struct key *keyring, int loop, ret; ret = 0; - klist = keyring->payload.subscriptions; - + klist = rcu_dereference_locked_keyring(keyring); if (klist) { /* calculate how much data we could return */ qty = klist->nkeys * sizeof(key_serial_t); @@ -526,9 +530,8 @@ struct key *find_keyring_by_name(const char *name, bool skip_perm_check) struct key *keyring; int bucket; - keyring = ERR_PTR(-EINVAL); if (!name) - goto error; + return ERR_PTR(-EINVAL); bucket = keyring_hash(name); @@ -555,17 +558,18 @@ struct key *find_keyring_by_name(const char *name, bool skip_perm_check) KEY_SEARCH) < 0) continue; - /* we've got a match */ - atomic_inc(&keyring->usage); - read_unlock(&keyring_name_lock); - goto error; + /* we've got a match but we might end up racing with + * key_cleanup() if the keyring is currently 'dead' + * (ie. it has a zero usage count) */ + if (!atomic_inc_not_zero(&keyring->usage)) + continue; + goto out; } } - read_unlock(&keyring_name_lock); keyring = ERR_PTR(-ENOKEY); - - error: +out: + read_unlock(&keyring_name_lock); return keyring; } /* end find_keyring_by_name() */ @@ -720,8 +724,7 @@ int __key_link(struct key *keyring, struct key *key) } /* see if there's a matching key we can displace */ - klist = keyring->payload.subscriptions; - + klist = rcu_dereference_locked_keyring(keyring); if (klist && klist->nkeys > 0) { struct key_type *type = key->type; @@ -765,8 +768,6 @@ int __key_link(struct key *keyring, struct key *key) if (ret < 0) goto error2; - klist = keyring->payload.subscriptions; - if (klist && klist->nkeys < klist->maxkeys) { /* there's sufficient slack space to add directly */ atomic_inc(&key->usage); @@ -868,7 +869,7 @@ int key_unlink(struct key *keyring, struct key *key) down_write(&keyring->sem); - klist = keyring->payload.subscriptions; + klist = rcu_dereference_locked_keyring(keyring); if (klist) { /* search the keyring for the key */ for (loop = 0; loop < klist->nkeys; loop++) @@ -959,7 +960,7 @@ int keyring_clear(struct key *keyring) /* detach the pointer block with the locks held */ down_write(&keyring->sem); - klist = keyring->payload.subscriptions; + klist = rcu_dereference_locked_keyring(keyring); if (klist) { /* adjust the quota */ key_payload_reserve(keyring, @@ -991,7 +992,9 @@ EXPORT_SYMBOL(keyring_clear); */ static void keyring_revoke(struct key *keyring) { - struct keyring_list *klist = keyring->payload.subscriptions; + struct keyring_list *klist; + + klist = rcu_dereference_locked_keyring(keyring); /* adjust the quota */ key_payload_reserve(keyring, 0); @@ -1025,7 +1028,7 @@ void keyring_gc(struct key *keyring, time_t limit) down_write(&keyring->sem); - klist = keyring->payload.subscriptions; + klist = rcu_dereference_locked_keyring(keyring); if (!klist) goto no_klist; diff --git a/security/keys/request_key.c b/security/keys/request_key.c index d737cea5347c..d8c1a6a0fb08 100644 --- a/security/keys/request_key.c +++ b/security/keys/request_key.c @@ -94,7 +94,7 @@ static int call_sbin_request_key(struct key_construction *cons, } /* attach the auth key to the session keyring */ - ret = __key_link(keyring, authkey); + ret = key_link(keyring, authkey); if (ret < 0) goto error_link; diff --git a/security/keys/user_defined.c b/security/keys/user_defined.c index 7c687d568221..e9aa07929656 100644 --- a/security/keys/user_defined.c +++ b/security/keys/user_defined.c @@ -199,7 +199,8 @@ long user_read(const struct key *key, char __user *buffer, size_t buflen) struct user_key_payload *upayload; long ret; - upayload = rcu_dereference(key->payload.data); + upayload = rcu_dereference_protected( + key->payload.data, rwsem_is_locked(&((struct key *)key)->sem)); ret = upayload->datalen; /* we can return the data as is */ diff --git a/sound/core/timer.c b/sound/core/timer.c index 73943651caed..5040c7b862fe 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -1160,6 +1160,7 @@ static void snd_timer_user_ccallback(struct snd_timer_instance *timeri, { struct snd_timer_user *tu = timeri->callback_data; struct snd_timer_tread r1; + unsigned long flags; if (event >= SNDRV_TIMER_EVENT_START && event <= SNDRV_TIMER_EVENT_PAUSE) @@ -1169,9 +1170,9 @@ static void snd_timer_user_ccallback(struct snd_timer_instance *timeri, r1.event = event; r1.tstamp = *tstamp; r1.val = resolution; - spin_lock(&tu->qlock); + spin_lock_irqsave(&tu->qlock, flags); snd_timer_user_append_to_tqueue(tu, &r1); - spin_unlock(&tu->qlock); + spin_unlock_irqrestore(&tu->qlock, flags); kill_fasync(&tu->fasync, SIGIO, POLL_IN); wake_up(&tu->qchange_sleep); } diff --git a/sound/isa/sb/es968.c b/sound/isa/sb/es968.c index cafc3a7316a8..ff18286fef9d 100644 --- a/sound/isa/sb/es968.c +++ b/sound/isa/sb/es968.c @@ -93,7 +93,7 @@ static int __devinit snd_card_es968_pnp(int dev, struct snd_card_es968 *acard, return err; } port[dev] = pnp_port_start(pdev, 0); - dma8[dev] = pnp_dma(pdev, 1); + dma8[dev] = pnp_dma(pdev, 0); irq[dev] = pnp_irq(pdev, 0); return 0; diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index 7de782a5b8f4..350ee8ac4153 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -766,7 +766,7 @@ static int build_input(struct hda_codec *codec) for (n = 0; n < AUTO_PIN_LAST; n++) { if (!spec->adc_nid[n]) continue; - err = snd_hda_add_nid(codec, kctl, 0, spec->adc_nid[i]); + err = snd_hda_add_nid(codec, kctl, 0, spec->adc_nid[n]); if (err < 0) return err; } diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 61682e1d09da..56e52071c769 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -1195,9 +1195,10 @@ static int patch_cxt5045(struct hda_codec *codec) switch (codec->subsystem_id >> 16) { case 0x103c: + case 0x1631: case 0x1734: - /* HP & Fujitsu-Siemens laptops have really bad sound over 0dB - * on NID 0x17. Fix max PCM level to 0 dB + /* HP, Packard Bell, & Fujitsu-Siemens laptops have really bad + * sound over 0dB on NID 0x17. Fix max PCM level to 0 dB * (originally it has 0x2b steps with 0dB offset 0x14) */ snd_hda_override_amp_caps(codec, 0x17, HDA_INPUT, @@ -2842,6 +2843,9 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = { CXT5066_DELL_LAPTOP), SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5), SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTO), + SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD), + SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5), + SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5), SND_PCI_QUIRK(0x17aa, 0x3a0d, "ideapad", CXT5066_IDEAPAD), {} }; diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 376e14a9c273..78e612100782 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -23,6 +23,7 @@ config SND_PXA2XX_SOC_I2S config SND_PXA_SOC_SSP tristate + select PXA_SSP config SND_PXA2XX_SOC_CORGI tristate "SoC Audio support for Sharp Zaurus SL-C7x0" diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 544fd9566f4d..a1fd23e0e3d0 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -32,9 +32,8 @@ #include #include -#include #include -#include +#include #include "pxa2xx-pcm.h" #include "pxa-ssp.h" @@ -57,15 +56,15 @@ struct ssp_priv { static void dump_registers(struct ssp_device *ssp) { dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n", - ssp_read_reg(ssp, SSCR0), ssp_read_reg(ssp, SSCR1), - ssp_read_reg(ssp, SSTO)); + pxa_ssp_read_reg(ssp, SSCR0), pxa_ssp_read_reg(ssp, SSCR1), + pxa_ssp_read_reg(ssp, SSTO)); dev_dbg(&ssp->pdev->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n", - ssp_read_reg(ssp, SSPSP), ssp_read_reg(ssp, SSSR), - ssp_read_reg(ssp, SSACD)); + pxa_ssp_read_reg(ssp, SSPSP), pxa_ssp_read_reg(ssp, SSSR), + pxa_ssp_read_reg(ssp, SSACD)); } -static void ssp_enable(struct ssp_device *ssp) +static void pxa_ssp_enable(struct ssp_device *ssp) { uint32_t sscr0; @@ -73,7 +72,7 @@ static void ssp_enable(struct ssp_device *ssp) __raw_writel(sscr0, ssp->mmio_base + SSCR0); } -static void ssp_disable(struct ssp_device *ssp) +static void pxa_ssp_disable(struct ssp_device *ssp) { uint32_t sscr0; @@ -87,7 +86,7 @@ struct pxa2xx_pcm_dma_data { }; static struct pxa2xx_pcm_dma_params * -ssp_get_dma_params(struct ssp_device *ssp, int width4, int out) +pxa_ssp_get_dma_params(struct ssp_device *ssp, int width4, int out) { struct pxa2xx_pcm_dma_data *dma; @@ -119,7 +118,7 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream, if (!cpu_dai->active) { clk_enable(ssp->clk); - ssp_disable(ssp); + pxa_ssp_disable(ssp); } kfree(snd_soc_dai_get_dma_data(cpu_dai, substream)); @@ -137,7 +136,7 @@ static void pxa_ssp_shutdown(struct snd_pcm_substream *substream, struct ssp_device *ssp = priv->ssp; if (!cpu_dai->active) { - ssp_disable(ssp); + pxa_ssp_disable(ssp); clk_disable(ssp->clk); } @@ -160,7 +159,7 @@ static int pxa_ssp_suspend(struct snd_soc_dai *cpu_dai) priv->to = __raw_readl(ssp->mmio_base + SSTO); priv->psp = __raw_readl(ssp->mmio_base + SSPSP); - ssp_disable(ssp); + pxa_ssp_disable(ssp); clk_disable(ssp->clk); return 0; } @@ -180,7 +179,7 @@ static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai) __raw_writel(priv->psp, ssp->mmio_base + SSPSP); if (cpu_dai->active) - ssp_enable(ssp); + pxa_ssp_enable(ssp); else clk_disable(ssp->clk); @@ -196,9 +195,9 @@ static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai) * ssp_set_clkdiv - set SSP clock divider * @div: serial clock rate divider */ -static void ssp_set_scr(struct ssp_device *ssp, u32 div) +static void pxa_ssp_set_scr(struct ssp_device *ssp, u32 div) { - u32 sscr0 = ssp_read_reg(ssp, SSCR0); + u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0); if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) { sscr0 &= ~0x0000ff00; @@ -207,15 +206,15 @@ static void ssp_set_scr(struct ssp_device *ssp, u32 div) sscr0 &= ~0x000fff00; sscr0 |= (div - 1) << 8; /* 1..4096 */ } - ssp_write_reg(ssp, SSCR0, sscr0); + pxa_ssp_write_reg(ssp, SSCR0, sscr0); } /** - * ssp_get_clkdiv - get SSP clock divider + * pxa_ssp_get_clkdiv - get SSP clock divider */ -static u32 ssp_get_scr(struct ssp_device *ssp) +static u32 pxa_ssp_get_scr(struct ssp_device *ssp) { - u32 sscr0 = ssp_read_reg(ssp, SSCR0); + u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0); u32 div; if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) @@ -235,7 +234,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, struct ssp_device *ssp = priv->ssp; int val; - u32 sscr0 = ssp_read_reg(ssp, SSCR0) & + u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); dev_dbg(&ssp->pdev->dev, @@ -263,7 +262,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, break; case PXA_SSP_CLK_AUDIO: priv->sysclk = 0; - ssp_set_scr(ssp, 1); + pxa_ssp_set_scr(ssp, 1); sscr0 |= SSCR0_ACS; break; default: @@ -274,8 +273,8 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, * on PXA2xx. On PXA3xx it must be enabled when doing so. */ if (!cpu_is_pxa3xx()) clk_disable(ssp->clk); - val = ssp_read_reg(ssp, SSCR0) | sscr0; - ssp_write_reg(ssp, SSCR0, val); + val = pxa_ssp_read_reg(ssp, SSCR0) | sscr0; + pxa_ssp_write_reg(ssp, SSCR0, val); if (!cpu_is_pxa3xx()) clk_enable(ssp->clk); @@ -294,11 +293,11 @@ static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, switch (div_id) { case PXA_SSP_AUDIO_DIV_ACDS: - val = (ssp_read_reg(ssp, SSACD) & ~0x7) | SSACD_ACDS(div); - ssp_write_reg(ssp, SSACD, val); + val = (pxa_ssp_read_reg(ssp, SSACD) & ~0x7) | SSACD_ACDS(div); + pxa_ssp_write_reg(ssp, SSACD, val); break; case PXA_SSP_AUDIO_DIV_SCDB: - val = ssp_read_reg(ssp, SSACD); + val = pxa_ssp_read_reg(ssp, SSACD); val &= ~SSACD_SCDB; #if defined(CONFIG_PXA3xx) if (cpu_is_pxa3xx()) @@ -321,10 +320,10 @@ static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, default: return -EINVAL; } - ssp_write_reg(ssp, SSACD, val); + pxa_ssp_write_reg(ssp, SSACD, val); break; case PXA_SSP_DIV_SCR: - ssp_set_scr(ssp, div); + pxa_ssp_set_scr(ssp, div); break; default: return -ENODEV; @@ -341,11 +340,11 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, { struct ssp_priv *priv = cpu_dai->private_data; struct ssp_device *ssp = priv->ssp; - u32 ssacd = ssp_read_reg(ssp, SSACD) & ~0x70; + u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70; #if defined(CONFIG_PXA3xx) if (cpu_is_pxa3xx()) - ssp_write_reg(ssp, SSACDD, 0); + pxa_ssp_write_reg(ssp, SSACDD, 0); #endif switch (freq_out) { @@ -383,7 +382,7 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, val = tmp; val = (val << 16) | 64; - ssp_write_reg(ssp, SSACDD, val); + pxa_ssp_write_reg(ssp, SSACDD, val); ssacd |= (0x6 << 4); @@ -397,7 +396,7 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, return -EINVAL; } - ssp_write_reg(ssp, SSACD, ssacd); + pxa_ssp_write_reg(ssp, SSACD, ssacd); return 0; } @@ -412,7 +411,7 @@ static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, struct ssp_device *ssp = priv->ssp; u32 sscr0; - sscr0 = ssp_read_reg(ssp, SSCR0); + sscr0 = pxa_ssp_read_reg(ssp, SSCR0); sscr0 &= ~(SSCR0_MOD | SSCR0_SlotsPerFrm(8) | SSCR0_EDSS | SSCR0_DSS); /* set slot width */ @@ -429,10 +428,10 @@ static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, sscr0 |= SSCR0_SlotsPerFrm(slots); /* set active slot mask */ - ssp_write_reg(ssp, SSTSA, tx_mask); - ssp_write_reg(ssp, SSRSA, rx_mask); + pxa_ssp_write_reg(ssp, SSTSA, tx_mask); + pxa_ssp_write_reg(ssp, SSRSA, rx_mask); } - ssp_write_reg(ssp, SSCR0, sscr0); + pxa_ssp_write_reg(ssp, SSCR0, sscr0); return 0; } @@ -447,12 +446,12 @@ static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai, struct ssp_device *ssp = priv->ssp; u32 sscr1; - sscr1 = ssp_read_reg(ssp, SSCR1); + sscr1 = pxa_ssp_read_reg(ssp, SSCR1); if (tristate) sscr1 &= ~SSCR1_TTE; else sscr1 |= SSCR1_TTE; - ssp_write_reg(ssp, SSCR1, sscr1); + pxa_ssp_write_reg(ssp, SSCR1, sscr1); return 0; } @@ -476,14 +475,14 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, return 0; /* we can only change the settings if the port is not in use */ - if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) { + if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) { dev_err(&ssp->pdev->dev, "can't change hardware dai format: stream is in use"); return -EINVAL; } /* reset port settings */ - sscr0 = ssp_read_reg(ssp, SSCR0) & + sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & (SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); sscr1 = SSCR1_RxTresh(8) | SSCR1_TxTresh(7); sspsp = 0; @@ -535,9 +534,9 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, return -EINVAL; } - ssp_write_reg(ssp, SSCR0, sscr0); - ssp_write_reg(ssp, SSCR1, sscr1); - ssp_write_reg(ssp, SSPSP, sspsp); + pxa_ssp_write_reg(ssp, SSCR0, sscr0); + pxa_ssp_write_reg(ssp, SSCR1, sscr1); + pxa_ssp_write_reg(ssp, SSPSP, sspsp); dump_registers(ssp); @@ -566,7 +565,7 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, u32 sscr0; u32 sspsp; int width = snd_pcm_format_physical_width(params_format(params)); - int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf; + int ttsa = pxa_ssp_read_reg(ssp, SSTSA) & 0xf; struct pxa2xx_pcm_dma_params *dma_data; dma_data = snd_soc_dai_get_dma_data(dai, substream); @@ -578,22 +577,22 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, * to force 16-bit frame width on the wire (for S16_LE), even * with two channels. Use 16-bit DMA transfers for this case. */ - dma_data = ssp_get_dma_params(ssp, + dma_data = pxa_ssp_get_dma_params(ssp, ((chn == 2) && (ttsa != 1)) || (width == 32), substream->stream == SNDRV_PCM_STREAM_PLAYBACK); snd_soc_dai_set_dma_data(dai, substream, dma_data); /* we can only change the settings if the port is not in use */ - if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) + if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) return 0; /* clear selected SSP bits */ - sscr0 = ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS); - ssp_write_reg(ssp, SSCR0, sscr0); + sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS); + pxa_ssp_write_reg(ssp, SSCR0, sscr0); /* bit size */ - sscr0 = ssp_read_reg(ssp, SSCR0); + sscr0 = pxa_ssp_read_reg(ssp, SSCR0); switch (params_format(params)) { case SNDRV_PCM_FORMAT_S16_LE: #ifdef CONFIG_PXA3xx @@ -609,13 +608,13 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16)); break; } - ssp_write_reg(ssp, SSCR0, sscr0); + pxa_ssp_write_reg(ssp, SSCR0, sscr0); switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: - sspsp = ssp_read_reg(ssp, SSPSP); + sspsp = pxa_ssp_read_reg(ssp, SSPSP); - if ((ssp_get_scr(ssp) == 4) && (width == 16)) { + if ((pxa_ssp_get_scr(ssp) == 4) && (width == 16)) { /* This is a special case where the bitclk is 64fs * and we're not dealing with 2*32 bits of audio * samples. @@ -649,7 +648,7 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, sspsp |= SSPSP_DMYSTRT(1); } - ssp_write_reg(ssp, SSPSP, sspsp); + pxa_ssp_write_reg(ssp, SSPSP, sspsp); break; default: break; @@ -680,45 +679,45 @@ static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd, switch (cmd) { case SNDRV_PCM_TRIGGER_RESUME: - ssp_enable(ssp); + pxa_ssp_enable(ssp); break; case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - val = ssp_read_reg(ssp, SSCR1); + val = pxa_ssp_read_reg(ssp, SSCR1); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) val |= SSCR1_TSRE; else val |= SSCR1_RSRE; - ssp_write_reg(ssp, SSCR1, val); - val = ssp_read_reg(ssp, SSSR); - ssp_write_reg(ssp, SSSR, val); + pxa_ssp_write_reg(ssp, SSCR1, val); + val = pxa_ssp_read_reg(ssp, SSSR); + pxa_ssp_write_reg(ssp, SSSR, val); break; case SNDRV_PCM_TRIGGER_START: - val = ssp_read_reg(ssp, SSCR1); + val = pxa_ssp_read_reg(ssp, SSCR1); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) val |= SSCR1_TSRE; else val |= SSCR1_RSRE; - ssp_write_reg(ssp, SSCR1, val); - ssp_enable(ssp); + pxa_ssp_write_reg(ssp, SSCR1, val); + pxa_ssp_enable(ssp); break; case SNDRV_PCM_TRIGGER_STOP: - val = ssp_read_reg(ssp, SSCR1); + val = pxa_ssp_read_reg(ssp, SSCR1); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) val &= ~SSCR1_TSRE; else val &= ~SSCR1_RSRE; - ssp_write_reg(ssp, SSCR1, val); + pxa_ssp_write_reg(ssp, SSCR1, val); break; case SNDRV_PCM_TRIGGER_SUSPEND: - ssp_disable(ssp); + pxa_ssp_disable(ssp); break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - val = ssp_read_reg(ssp, SSCR1); + val = pxa_ssp_read_reg(ssp, SSCR1); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) val &= ~SSCR1_TSRE; else val &= ~SSCR1_RSRE; - ssp_write_reg(ssp, SSCR1, val); + pxa_ssp_write_reg(ssp, SSCR1, val); break; default: @@ -740,7 +739,7 @@ static int pxa_ssp_probe(struct platform_device *pdev, if (!priv) return -ENOMEM; - priv->ssp = ssp_request(dai->id + 1, "SoC audio"); + priv->ssp = pxa_ssp_request(dai->id + 1, "SoC audio"); if (priv->ssp == NULL) { ret = -ENODEV; goto err_priv; @@ -760,7 +759,7 @@ static void pxa_ssp_remove(struct platform_device *pdev, struct snd_soc_dai *dai) { struct ssp_priv *priv = dai->private_data; - ssp_free(priv->ssp); + pxa_ssp_free(priv->ssp); } #define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ diff --git a/sound/soc/txx9/txx9aclc-ac97.c b/sound/soc/txx9/txx9aclc-ac97.c index 612e18b4bf4e..0ec20b68e8cb 100644 --- a/sound/soc/txx9/txx9aclc-ac97.c +++ b/sound/soc/txx9/txx9aclc-ac97.c @@ -254,3 +254,4 @@ module_exit(txx9aclc_ac97_exit); MODULE_AUTHOR("Atsushi Nemoto "); MODULE_DESCRIPTION("TXx9 ACLC AC97 driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:txx9aclc-ac97"); diff --git a/sound/soc/txx9/txx9aclc-generic.c b/sound/soc/txx9/txx9aclc-generic.c index 3175de9a92cb..95b17f731aec 100644 --- a/sound/soc/txx9/txx9aclc-generic.c +++ b/sound/soc/txx9/txx9aclc-generic.c @@ -96,3 +96,4 @@ module_exit(txx9aclc_generic_exit); MODULE_AUTHOR("Atsushi Nemoto "); MODULE_DESCRIPTION("Generic TXx9 ACLC ALSA SoC audio driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:txx9aclc-generic");