[PATCH] via82cxxx IDE: support multiple controllers
Support multiple controllers in the via82cxxx IDE driver. Cable detection and ISA bridge finding have been moved into their own functions. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
parent
861e76a8ab
commit
7462cbff7d
|
@ -100,11 +100,15 @@ static struct via_isa_bridge {
|
|||
{ NULL }
|
||||
};
|
||||
|
||||
static struct via_isa_bridge *via_config;
|
||||
static unsigned int via_80w;
|
||||
static unsigned int via_clock;
|
||||
static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" };
|
||||
|
||||
struct via82cxxx_dev
|
||||
{
|
||||
struct via_isa_bridge *via_config;
|
||||
unsigned int via_80w;
|
||||
};
|
||||
|
||||
/**
|
||||
* via_set_speed - write timing registers
|
||||
* @dev: PCI device
|
||||
|
@ -114,11 +118,13 @@ static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" }
|
|||
* via_set_speed writes timing values to the chipset registers
|
||||
*/
|
||||
|
||||
static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing)
|
||||
static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
|
||||
{
|
||||
struct pci_dev *dev = hwif->pci_dev;
|
||||
struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif);
|
||||
u8 t;
|
||||
|
||||
if (~via_config->flags & VIA_BAD_AST) {
|
||||
if (~vdev->via_config->flags & VIA_BAD_AST) {
|
||||
pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
|
||||
t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
|
||||
pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
|
||||
|
@ -130,7 +136,7 @@ static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing)
|
|||
pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
|
||||
((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
|
||||
|
||||
switch (via_config->flags & VIA_UDMA) {
|
||||
switch (vdev->via_config->flags & VIA_UDMA) {
|
||||
case VIA_UDMA_33: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
|
||||
case VIA_UDMA_66: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break;
|
||||
case VIA_UDMA_100: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
|
||||
|
@ -154,6 +160,7 @@ static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing)
|
|||
static int via_set_drive(ide_drive_t *drive, u8 speed)
|
||||
{
|
||||
ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
|
||||
struct via82cxxx_dev *vdev = ide_get_hwifdata(drive->hwif);
|
||||
struct ide_timing t, p;
|
||||
unsigned int T, UT;
|
||||
|
||||
|
@ -162,7 +169,7 @@ static int via_set_drive(ide_drive_t *drive, u8 speed)
|
|||
|
||||
T = 1000000000 / via_clock;
|
||||
|
||||
switch (via_config->flags & VIA_UDMA) {
|
||||
switch (vdev->via_config->flags & VIA_UDMA) {
|
||||
case VIA_UDMA_33: UT = T; break;
|
||||
case VIA_UDMA_66: UT = T/2; break;
|
||||
case VIA_UDMA_100: UT = T/3; break;
|
||||
|
@ -177,7 +184,7 @@ static int via_set_drive(ide_drive_t *drive, u8 speed)
|
|||
ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
|
||||
}
|
||||
|
||||
via_set_speed(HWIF(drive)->pci_dev, drive->dn, &t);
|
||||
via_set_speed(HWIF(drive), drive->dn, &t);
|
||||
|
||||
if (!drive->init_speed)
|
||||
drive->init_speed = speed;
|
||||
|
@ -215,20 +222,41 @@ static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio)
|
|||
|
||||
static int via82cxxx_ide_dma_check (ide_drive_t *drive)
|
||||
{
|
||||
u16 w80 = HWIF(drive)->udma_four;
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif);
|
||||
u16 w80 = hwif->udma_four;
|
||||
|
||||
u16 speed = ide_find_best_mode(drive,
|
||||
XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA |
|
||||
(via_config->flags & VIA_UDMA ? XFER_UDMA : 0) |
|
||||
(w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) |
|
||||
(w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) |
|
||||
(w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0));
|
||||
(vdev->via_config->flags & VIA_UDMA ? XFER_UDMA : 0) |
|
||||
(w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) |
|
||||
(w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) |
|
||||
(w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0));
|
||||
|
||||
via_set_drive(drive, speed);
|
||||
|
||||
if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
|
||||
return HWIF(drive)->ide_dma_on(drive);
|
||||
return HWIF(drive)->ide_dma_off_quietly(drive);
|
||||
return hwif->ide_dma_on(drive);
|
||||
return hwif->ide_dma_off_quietly(drive);
|
||||
}
|
||||
|
||||
static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
|
||||
{
|
||||
struct via_isa_bridge *via_config;
|
||||
u8 t;
|
||||
|
||||
for (via_config = via_isa_bridges; via_config->id; via_config++)
|
||||
if ((*isa = pci_find_device(PCI_VENDOR_ID_VIA +
|
||||
!!(via_config->flags & VIA_BAD_ID),
|
||||
via_config->id, NULL))) {
|
||||
|
||||
pci_read_config_byte(*isa, PCI_REVISION_ID, &t);
|
||||
if (t >= via_config->rev_min &&
|
||||
t <= via_config->rev_max)
|
||||
break;
|
||||
}
|
||||
|
||||
return via_config;
|
||||
}
|
||||
|
||||
/**
|
||||
|
@ -243,82 +271,28 @@ static int via82cxxx_ide_dma_check (ide_drive_t *drive)
|
|||
static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name)
|
||||
{
|
||||
struct pci_dev *isa = NULL;
|
||||
struct via_isa_bridge *via_config;
|
||||
u8 t, v;
|
||||
unsigned int u;
|
||||
int i;
|
||||
|
||||
/*
|
||||
* Find the ISA bridge to see how good the IDE is.
|
||||
*/
|
||||
|
||||
for (via_config = via_isa_bridges; via_config->id; via_config++)
|
||||
if ((isa = pci_find_device(PCI_VENDOR_ID_VIA +
|
||||
!!(via_config->flags & VIA_BAD_ID),
|
||||
via_config->id, NULL))) {
|
||||
|
||||
pci_read_config_byte(isa, PCI_REVISION_ID, &t);
|
||||
if (t >= via_config->rev_min &&
|
||||
t <= via_config->rev_max)
|
||||
break;
|
||||
}
|
||||
|
||||
via_config = via_config_find(&isa);
|
||||
if (!via_config->id) {
|
||||
printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/*
|
||||
* Check 80-wire cable presence and setup Clk66.
|
||||
* Setup or disable Clk66 if appropriate
|
||||
*/
|
||||
|
||||
switch (via_config->flags & VIA_UDMA) {
|
||||
|
||||
case VIA_UDMA_66:
|
||||
/* Enable Clk66 */
|
||||
pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
|
||||
pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
|
||||
for (i = 24; i >= 0; i -= 8)
|
||||
if (((u >> (i & 16)) & 8) &&
|
||||
((u >> i) & 0x20) &&
|
||||
(((u >> i) & 7) < 2)) {
|
||||
/*
|
||||
* 2x PCI clock and
|
||||
* UDMA w/ < 3T/cycle
|
||||
*/
|
||||
via_80w |= (1 << (1 - (i >> 4)));
|
||||
}
|
||||
break;
|
||||
|
||||
case VIA_UDMA_100:
|
||||
pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
|
||||
for (i = 24; i >= 0; i -= 8)
|
||||
if (((u >> i) & 0x10) ||
|
||||
(((u >> i) & 0x20) &&
|
||||
(((u >> i) & 7) < 4))) {
|
||||
/* BIOS 80-wire bit or
|
||||
* UDMA w/ < 60ns/cycle
|
||||
*/
|
||||
via_80w |= (1 << (1 - (i >> 4)));
|
||||
}
|
||||
break;
|
||||
|
||||
case VIA_UDMA_133:
|
||||
pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
|
||||
for (i = 24; i >= 0; i -= 8)
|
||||
if (((u >> i) & 0x10) ||
|
||||
(((u >> i) & 0x20) &&
|
||||
(((u >> i) & 7) < 6))) {
|
||||
/* BIOS 80-wire bit or
|
||||
* UDMA w/ < 60ns/cycle
|
||||
*/
|
||||
via_80w |= (1 << (1 - (i >> 4)));
|
||||
}
|
||||
break;
|
||||
|
||||
}
|
||||
|
||||
/* Disable Clk66 */
|
||||
if (via_config->flags & VIA_BAD_CLK66) {
|
||||
if ((via_config->flags & VIA_UDMA) == VIA_UDMA_66) {
|
||||
/* Enable Clk66 */
|
||||
pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
|
||||
pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
|
||||
} else if (via_config->flags & VIA_BAD_CLK66) {
|
||||
/* Would cause trouble on 596a and 686 */
|
||||
pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
|
||||
pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
|
||||
|
@ -388,10 +362,75 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const
|
|||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Check and handle 80-wire cable presence
|
||||
*/
|
||||
static void __devinit via_cable_detect(struct pci_dev *dev, struct via82cxxx_dev *vdev)
|
||||
{
|
||||
unsigned int u;
|
||||
int i;
|
||||
pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
|
||||
|
||||
switch (vdev->via_config->flags & VIA_UDMA) {
|
||||
|
||||
case VIA_UDMA_66:
|
||||
for (i = 24; i >= 0; i -= 8)
|
||||
if (((u >> (i & 16)) & 8) &&
|
||||
((u >> i) & 0x20) &&
|
||||
(((u >> i) & 7) < 2)) {
|
||||
/*
|
||||
* 2x PCI clock and
|
||||
* UDMA w/ < 3T/cycle
|
||||
*/
|
||||
vdev->via_80w |= (1 << (1 - (i >> 4)));
|
||||
}
|
||||
break;
|
||||
|
||||
case VIA_UDMA_100:
|
||||
for (i = 24; i >= 0; i -= 8)
|
||||
if (((u >> i) & 0x10) ||
|
||||
(((u >> i) & 0x20) &&
|
||||
(((u >> i) & 7) < 4))) {
|
||||
/* BIOS 80-wire bit or
|
||||
* UDMA w/ < 60ns/cycle
|
||||
*/
|
||||
vdev->via_80w |= (1 << (1 - (i >> 4)));
|
||||
}
|
||||
break;
|
||||
|
||||
case VIA_UDMA_133:
|
||||
for (i = 24; i >= 0; i -= 8)
|
||||
if (((u >> i) & 0x10) ||
|
||||
(((u >> i) & 0x20) &&
|
||||
(((u >> i) & 7) < 6))) {
|
||||
/* BIOS 80-wire bit or
|
||||
* UDMA w/ < 60ns/cycle
|
||||
*/
|
||||
vdev->via_80w |= (1 << (1 - (i >> 4)));
|
||||
}
|
||||
break;
|
||||
|
||||
}
|
||||
}
|
||||
|
||||
static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
|
||||
{
|
||||
struct via82cxxx_dev *vdev = kmalloc(sizeof(struct via82cxxx_dev),
|
||||
GFP_KERNEL);
|
||||
struct pci_dev *isa = NULL;
|
||||
int i;
|
||||
|
||||
if (vdev == NULL) {
|
||||
printk(KERN_ERR "VP_IDE: out of memory :(\n");
|
||||
return;
|
||||
}
|
||||
|
||||
memset(vdev, 0, sizeof(struct via82cxxx_dev));
|
||||
ide_set_hwifdata(hwif, vdev);
|
||||
|
||||
vdev->via_config = via_config_find(&isa);
|
||||
via_cable_detect(hwif->pci_dev, vdev);
|
||||
|
||||
hwif->autodma = 0;
|
||||
|
||||
hwif->tuneproc = &via82cxxx_tune_drive;
|
||||
|
@ -406,7 +445,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
|
|||
|
||||
for (i = 0; i < 2; i++) {
|
||||
hwif->drives[i].io_32bit = 1;
|
||||
hwif->drives[i].unmask = (via_config->flags & VIA_NO_UNMASK) ? 0 : 1;
|
||||
hwif->drives[i].unmask = (vdev->via_config->flags & VIA_NO_UNMASK) ? 0 : 1;
|
||||
hwif->drives[i].autotune = 1;
|
||||
hwif->drives[i].dn = hwif->channel * 2 + i;
|
||||
}
|
||||
|
@ -420,7 +459,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
|
|||
hwif->swdma_mask = 0x07;
|
||||
|
||||
if (!hwif->udma_four)
|
||||
hwif->udma_four = (via_80w >> hwif->channel) & 1;
|
||||
hwif->udma_four = (vdev->via_80w >> hwif->channel) & 1;
|
||||
hwif->ide_dma_check = &via82cxxx_ide_dma_check;
|
||||
if (!noautodma)
|
||||
hwif->autodma = 1;
|
||||
|
|
Loading…
Reference in New Issue