soc: mediatek: PMIC wrap: Clear the vldclr if state machine stay on FSM_VLDCLR state.

Sometimes PMIC is too busy to send data in time to cause pmic wrap timeout,
because pmic wrap is waiting for FSM_VLDCLR after finishing WACS2_CMD. It
just return error when issue happened, so the state machine will stay on
FSM_VLDCLR state when data send back later by PMIC and timeout again in next
time because pmic wrap waiting for FSM_IDLE state at the beginning of the
read/write function.

Clear the vldclr when timeout if state machine stay on FSM_VLDCLR.

Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Tested-by: Ricky Liang <jcliang@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This commit is contained in:
Henry Chen 2016-01-04 20:02:52 +08:00 committed by Matthias Brugger
parent 92e963f50f
commit 73efe5792b
1 changed files with 20 additions and 2 deletions

View File

@ -412,6 +412,20 @@ static bool pwrap_is_fsm_vldclr(struct pmic_wrapper *wrp)
return PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR;
}
/*
* Timeout issue sometimes caused by the last read command
* failed because pmic wrap could not got the FSM_VLDCLR
* in time after finishing WACS2_CMD. It made state machine
* still on FSM_VLDCLR and timeout next time.
* Check the status of FSM and clear the vldclr to recovery the
* error.
*/
static inline void pwrap_leave_fsm_vldclr(struct pmic_wrapper *wrp)
{
if (pwrap_is_fsm_vldclr(wrp))
pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR);
}
static bool pwrap_is_sync_idle(struct pmic_wrapper *wrp)
{
return pwrap_readl(wrp, PWRAP_WACS2_RDATA) & PWRAP_STATE_SYNC_IDLE0;
@ -445,8 +459,10 @@ static int pwrap_write(struct pmic_wrapper *wrp, u32 adr, u32 wdata)
int ret;
ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
if (ret)
if (ret) {
pwrap_leave_fsm_vldclr(wrp);
return ret;
}
pwrap_writel(wrp, (1 << 31) | ((adr >> 1) << 16) | wdata,
PWRAP_WACS2_CMD);
@ -459,8 +475,10 @@ static int pwrap_read(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
int ret;
ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
if (ret)
if (ret) {
pwrap_leave_fsm_vldclr(wrp);
return ret;
}
pwrap_writel(wrp, (adr >> 1) << 16, PWRAP_WACS2_CMD);