From ae142bd9976532aa5232ab0b00e621690d8bfe6a Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Mon, 27 Apr 2015 08:55:18 +0200 Subject: [PATCH 1/7] ARM: mvebu: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs Whereas for Armada 370 and XP the main PLL frequency was 2GHz for the Armada 375, 38x and 39x, the frequency is 1GHz. When writing support for these last SoCs, there was no official value for the PLL. Now that we have it, this patch fixes it in the device tree. This value is currently only used by the NAND driver for the setting the NAND timing. Fortunately it is not actually used: all the mainline board with a NAND flash comes with a NAND device tree node using the "marvell,nand-keep-config" property. With this property the timings are not modified in the kernel driver and are kept from the bootloader. Signed-off-by: Gregory CLEMENT Acked-by: Andrew Lunn Acked-by: Marcin Wojtas --- arch/arm/boot/dts/armada-375.dtsi | 2 +- arch/arm/boot/dts/armada-38x.dtsi | 2 +- arch/arm/boot/dts/armada-39x.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index c675257f2377..f076ff856d8b 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -69,7 +69,7 @@ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <2000000000>; + clock-frequency = <1000000000>; }; /* 25 MHz reference crystal */ refclk: oscillator { diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index ed2dd8ba4080..218a2acd36e5 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -585,7 +585,7 @@ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <2000000000>; + clock-frequency = <1000000000>; }; /* 25 MHz reference crystal */ diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index 0e85fc15ceda..ecd1318109ba 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -502,7 +502,7 @@ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <2000000000>; + clock-frequency = <1000000000>; }; }; }; From ba0a1ff85376811d3ca789fb4848fef55390d095 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Mon, 4 May 2015 23:04:15 +0200 Subject: [PATCH 2/7] ARM: dove: Add clock-names to CuBox Si5351 clk generator Si5351 clock generator on CuBox uses XTAL as clock reference, name the clock phandle accordingly. Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/dove-cubox.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index aae7efc09b0b..e6fa251e17b9 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -87,6 +87,7 @@ /* connect xtal input to 25MHz reference */ clocks = <&ref25>; + clock-names = "xtal"; /* connect xtal input as source of pll0 and pll1 */ silabs,pll-source = <0 0>, <1 0>; From 31c17ac98fc005c0998f890094eb8fe17061e667 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 15 May 2015 14:25:43 +0200 Subject: [PATCH 3/7] MAINTAINERS: Add dts entries for some of the Marvell SoCs Since many releases, the modifications of the mvebu and berlin device tree files are merged through the mvebu subsystem. This patch makes it official in order to help the contributors using the get_maintainer.pl to find the accurate peoples. In the same time, updated the mvebu description which now includes the kirkwood SoCs and new Armada SoCs. Signed-off-by: Gregory CLEMENT Acked-by: Sebastian Hesselbarth Acked-by: Jason Cooper Acked-by: Andrew Lunn --- MAINTAINERS | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 2e5bbc0d68b2..23a94ef317c4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1188,7 +1188,7 @@ ARM/MAGICIAN MACHINE SUPPORT M: Philipp Zabel S: Maintained -ARM/Marvell Armada 370 and Armada XP SOC support +ARM/Marvell Kirkwood and Armada 370, 375, 38x, XP SOC support M: Jason Cooper M: Andrew Lunn M: Gregory Clement @@ -1197,12 +1197,17 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-mvebu/ F: drivers/rtc/rtc-armada38x.c +F: arch/arm/boot/dts/armada* +F: arch/arm/boot/dts/kirkwood* + ARM/Marvell Berlin SoC support M: Sebastian Hesselbarth L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-berlin/ +F: arch/arm/boot/dts/berlin* + ARM/Marvell Dove/MV78xx0/Orion SOC support M: Jason Cooper @@ -1215,6 +1220,9 @@ F: arch/arm/mach-dove/ F: arch/arm/mach-mv78xx0/ F: arch/arm/mach-orion5x/ F: arch/arm/plat-orion/ +F: arch/arm/boot/dts/dove* +F: arch/arm/boot/dts/orion5x* + ARM/Orion SoC/Technologic Systems TS-78xx platform support M: Alexander Clouter From 2ff9ab4c7b6d17c82a01e3449173465cf742e897 Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Wed, 20 May 2015 23:22:04 +0200 Subject: [PATCH 4/7] ARM: mvebu: armada-xp-linksys-mamba: Disable internal RTC The Mamba (like the OpenBlocks AX3) doesn't have a crystal connected to the internal RTC - let's prevent the kernel from probing it. Signed-off-by: Imre Kaloz Cc: # v4.0 + Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index a2cf2154dcdb..fdd187c55aa5 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -95,6 +95,11 @@ internal-regs { + rtc@10300 { + /* No crystal connected to the internal RTC */ + status = "disabled"; + }; + /* J10: VCC, NC, RX, NC, TX, GND */ serial@12000 { status = "okay"; From 8c9e06e64768665503e778088a39ecff3a6f2e0c Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Thu, 28 May 2015 10:40:12 +0200 Subject: [PATCH 5/7] bus: mvebu-mbus: do not set WIN_CTRL_SYNCBARRIER on non io-coherent platforms. Commit a0b5cd4ac2d6 ("bus: mvebu-mbus: use automatic I/O synchronization barriers") enabled the usage of automatic I/O synchronization barriers by enabling bit WIN_CTRL_SYNCBARRIER in the control registers of MBus windows, but on non io-coherent platforms (orion5x, kirkwood and dove) the WIN_CTRL_SYNCBARRIER bit in the window control register is either reserved (all windows except 6 and 7) or enables read-only protection (windows 6 and 7). Signed-off-by: Nicolas Schichan Reviewed-by: Thomas Petazzoni Cc: # v4.0+ Fixes: a0b5cd4ac2d6 ("bus: mvebu-mbus: use automatic I/O synchronization barriers") Signed-off-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT --- drivers/bus/mvebu-mbus.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c index fb9ec6221730..7fa4510dfbe4 100644 --- a/drivers/bus/mvebu-mbus.c +++ b/drivers/bus/mvebu-mbus.c @@ -70,6 +70,7 @@ */ #define WIN_CTRL_OFF 0x0000 #define WIN_CTRL_ENABLE BIT(0) +/* Only on HW I/O coherency capable platforms */ #define WIN_CTRL_SYNCBARRIER BIT(1) #define WIN_CTRL_TGT_MASK 0xf0 #define WIN_CTRL_TGT_SHIFT 4 @@ -323,8 +324,9 @@ static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus, ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) | (attr << WIN_CTRL_ATTR_SHIFT) | (target << WIN_CTRL_TGT_SHIFT) | - WIN_CTRL_SYNCBARRIER | WIN_CTRL_ENABLE; + if (mbus->hw_io_coherency) + ctrl |= WIN_CTRL_SYNCBARRIER; writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF); writel(ctrl, addr + WIN_CTRL_OFF); From 885dbd154b2f2ee305cec6fd0a162e1a77ae2b06 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 28 May 2015 10:40:13 +0200 Subject: [PATCH 6/7] Revert "bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window" This reverts commit 1737cac69369 ("bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window"), because it breaks DMA on platforms having more than 2 GB of RAM. This commit changed the information reported to DMA masters device drivers through the mv_mbus_dram_info() function so that the returned DRAM ranges do not overlap with I/O windows. This was necessary as a preparation to support the new CESA Crypto Engine driver, which will use DMA for cryptographic operations. But since it does DMA with the SRAM which is mapped as an I/O window, having DRAM ranges overlapping with I/O windows was problematic. To solve this, the above mentioned commit changed the mvebu-mbus to adjust the DRAM ranges so that they don't overlap with the I/O windows. However, by doing this, we re-adjust the DRAM ranges in a way that makes them have a size that is no longer a power of two. While this is perfectly fine for the Crypto Engine, which supports DRAM ranges with a granularity of 64 KB, it breaks basically all other DMA masters, which expect power of two sizes for the DRAM ranges. Due to this, if the installed system memory is 4 GB, in two chip-selects of 2 GB, the second DRAM range will be reduced from 2 GB to a little bit less than 2 GB to not overlap with the I/O windows, in a way that results in a DRAM range that doesn't have a power of two size. This means that whenever you do a DMA transfer with an address located in the [ 2 GB ; 4 GB ] area, it will freeze the system. Any serious DMA activity like simply running: for i in $(seq 1 64) ; do dd if=/dev/urandom of=file$i bs=1M count=16 ; done in an ext3 partition mounted over a SATA drive will freeze the system. Since the new CESA crypto driver that uses DMA has not been merged yet, the easiest fix is to simply revert this commit. A follow-up commit will introduce a different solution for the CESA crypto driver. Signed-off-by: Thomas Petazzoni Fixes: 1737cac69369 ("bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window") Cc: # v4.0+ Signed-off-by: Gregory CLEMENT --- drivers/bus/mvebu-mbus.c | 105 ++++++--------------------------------- 1 file changed, 16 insertions(+), 89 deletions(-) diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c index 7fa4510dfbe4..6f047dcb94c2 100644 --- a/drivers/bus/mvebu-mbus.c +++ b/drivers/bus/mvebu-mbus.c @@ -58,7 +58,6 @@ #include #include #include -#include /* * DDR target is the same on all platforms. @@ -103,9 +102,7 @@ /* Relative to mbusbridge_base */ #define MBUS_BRIDGE_CTRL_OFF 0x0 -#define MBUS_BRIDGE_SIZE_MASK 0xffff0000 #define MBUS_BRIDGE_BASE_OFF 0x4 -#define MBUS_BRIDGE_BASE_MASK 0xffff0000 /* Maximum number of windows, for all known platforms */ #define MBUS_WINS_MAX 20 @@ -579,106 +576,36 @@ static unsigned int armada_xp_mbus_win_remap_offset(int win) return MVEBU_MBUS_NO_REMAP; } -/* - * Use the memblock information to find the MBus bridge hole in the - * physical address space. - */ -static void __init -mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end) -{ - struct memblock_region *r; - uint64_t s = 0; - - for_each_memblock(memory, r) { - /* - * This part of the memory is above 4 GB, so we don't - * care for the MBus bridge hole. - */ - if (r->base >= 0x100000000) - continue; - - /* - * The MBus bridge hole is at the end of the RAM under - * the 4 GB limit. - */ - if (r->base + r->size > s) - s = r->base + r->size; - } - - *start = s; - *end = 0x100000000; -} - static void __init mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus) { int i; int cs; - uint64_t mbus_bridge_base, mbus_bridge_end; mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; - mvebu_mbus_find_bridge_hole(&mbus_bridge_base, &mbus_bridge_end); - for (i = 0, cs = 0; i < 4; i++) { - u64 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i)); - u64 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i)); - u64 end; - struct mbus_dram_window *w; - - /* Ignore entries that are not enabled */ - if (!(size & DDR_SIZE_ENABLED)) - continue; + u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i)); + u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i)); /* - * Ignore entries whose base address is above 2^32, - * since devices cannot DMA to such high addresses + * We only take care of entries for which the chip + * select is enabled, and that don't have high base + * address bits set (devices can only access the first + * 32 bits of the memory). */ - if (base & DDR_BASE_CS_HIGH_MASK) - continue; + if ((size & DDR_SIZE_ENABLED) && + !(base & DDR_BASE_CS_HIGH_MASK)) { + struct mbus_dram_window *w; - base = base & DDR_BASE_CS_LOW_MASK; - size = (size | ~DDR_SIZE_MASK) + 1; - end = base + size; - - /* - * Adjust base/size of the current CS to make sure it - * doesn't overlap with the MBus bridge hole. This is - * particularly important for devices that do DMA from - * DRAM to a SRAM mapped in a MBus window, such as the - * CESA cryptographic engine. - */ - - /* - * The CS is fully enclosed inside the MBus bridge - * area, so ignore it. - */ - if (base >= mbus_bridge_base && end <= mbus_bridge_end) - continue; - - /* - * Beginning of CS overlaps with end of MBus, raise CS - * base address, and shrink its size. - */ - if (base >= mbus_bridge_base && end > mbus_bridge_end) { - size -= mbus_bridge_end - base; - base = mbus_bridge_end; + w = &mvebu_mbus_dram_info.cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0xf & ~(1 << i); + if (mbus->hw_io_coherency) + w->mbus_attr |= ATTR_HW_COHERENCY; + w->base = base & DDR_BASE_CS_LOW_MASK; + w->size = (size | ~DDR_SIZE_MASK) + 1; } - - /* - * End of CS overlaps with beginning of MBus, shrink - * CS size. - */ - if (base < mbus_bridge_base && end > mbus_bridge_base) - size -= end - mbus_bridge_base; - - w = &mvebu_mbus_dram_info.cs[cs++]; - w->cs_index = i; - w->mbus_attr = 0xf & ~(1 << i); - if (mbus->hw_io_coherency) - w->mbus_attr |= ATTR_HW_COHERENCY; - w->base = base; - w->size = size; } mvebu_mbus_dram_info.num_cs = cs; } From bfa1ce5f38938cc9e6c7f2d1011f88eba2b9e2b2 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 28 May 2015 11:40:54 +0200 Subject: [PATCH 7/7] bus: mvebu-mbus: add mv_mbus_dram_info_nooverlap() This commit introduces a variant of the mv_mbus_dram_info() function called mv_mbus_dram_info_nooverlap(). Both functions are used by Marvell drivers supporting devices doing DMA, and provide them a description the DRAM ranges that they need to configure their DRAM windows. The ranges provided by the mv_mbus_dram_info() function may overlap with the I/O windows if there is a lot (>= 4 GB) of RAM installed. This is not a problem for most of the DMA masters, except for the upcoming new CESA crypto driver because it does DMA to the SRAM, which is mapped through an I/O window. For this unit, we need to have DRAM ranges that do not overlap with the I/O windows. A first implementation done in commit 1737cac69369 ("bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window"), changed the information returned by mv_mbus_dram_info() to match this requirement. However, it broke the requirement of the other DMA masters than the DRAM ranges should have power of two sizes. To solve this situation, this commit introduces a new mv_mbus_dram_info_nooverlap() function, which returns the same information as mv_mbus_dram_info(), but guaranteed to not overlap with the I/O windows. In the end, it gives us two variants of the mv_mbus_dram_info*() functions: - The normal one, mv_mbus_dram_info(), which has been around for many years. This function returns the raw DRAM ranges, which are guaranteed to use power of two sizes, but will overlap with I/O windows. This function will therefore be used by all DMA masters (SATA, XOR, Ethernet, etc.) except the CESA crypto driver. - The new 'nooverlap' variant, mv_mbus_dram_info_nooverlap(). This function returns DRAM ranges after they have been "tweaked" to make sure they don't overlap with I/O windows. By doing this tweaking, we remove the power of two size guarantee. This variant will be used by the new CESA crypto driver. Signed-off-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT --- drivers/bus/mvebu-mbus.c | 117 +++++++++++++++++++++++++++++++++++++++ include/linux/mbus.h | 5 ++ 2 files changed, 122 insertions(+) diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c index 6f047dcb94c2..c43c3d2baf73 100644 --- a/drivers/bus/mvebu-mbus.c +++ b/drivers/bus/mvebu-mbus.c @@ -57,6 +57,7 @@ #include #include #include +#include #include /* @@ -152,13 +153,39 @@ struct mvebu_mbus_state { static struct mvebu_mbus_state mbus_state; +/* + * We provide two variants of the mv_mbus_dram_info() function: + * + * - The normal one, where the described DRAM ranges may overlap with + * the I/O windows, but for which the DRAM ranges are guaranteed to + * have a power of two size. Such ranges are suitable for the DMA + * masters that only DMA between the RAM and the device, which is + * actually all devices except the crypto engines. + * + * - The 'nooverlap' one, where the described DRAM ranges are + * guaranteed to not overlap with the I/O windows, but for which the + * DRAM ranges will not have power of two sizes. They will only be + * aligned on a 64 KB boundary, and have a size multiple of 64 + * KB. Such ranges are suitable for the DMA masters that DMA between + * the crypto SRAM (which is mapped through an I/O window) and a + * device. This is the case for the crypto engines. + */ + static struct mbus_dram_target_info mvebu_mbus_dram_info; +static struct mbus_dram_target_info mvebu_mbus_dram_info_nooverlap; + const struct mbus_dram_target_info *mv_mbus_dram_info(void) { return &mvebu_mbus_dram_info; } EXPORT_SYMBOL_GPL(mv_mbus_dram_info); +const struct mbus_dram_target_info *mv_mbus_dram_info_nooverlap(void) +{ + return &mvebu_mbus_dram_info_nooverlap; +} +EXPORT_SYMBOL_GPL(mv_mbus_dram_info_nooverlap); + /* Checks whether the given window has remap capability */ static bool mvebu_mbus_window_is_remappable(struct mvebu_mbus_state *mbus, const int win) @@ -576,6 +603,95 @@ static unsigned int armada_xp_mbus_win_remap_offset(int win) return MVEBU_MBUS_NO_REMAP; } +/* + * Use the memblock information to find the MBus bridge hole in the + * physical address space. + */ +static void __init +mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end) +{ + struct memblock_region *r; + uint64_t s = 0; + + for_each_memblock(memory, r) { + /* + * This part of the memory is above 4 GB, so we don't + * care for the MBus bridge hole. + */ + if (r->base >= 0x100000000ULL) + continue; + + /* + * The MBus bridge hole is at the end of the RAM under + * the 4 GB limit. + */ + if (r->base + r->size > s) + s = r->base + r->size; + } + + *start = s; + *end = 0x100000000ULL; +} + +/* + * This function fills in the mvebu_mbus_dram_info_nooverlap data + * structure, by looking at the mvebu_mbus_dram_info data, and + * removing the parts of it that overlap with I/O windows. + */ +static void __init +mvebu_mbus_setup_cpu_target_nooverlap(struct mvebu_mbus_state *mbus) +{ + uint64_t mbus_bridge_base, mbus_bridge_end; + int cs_nooverlap = 0; + int i; + + mvebu_mbus_find_bridge_hole(&mbus_bridge_base, &mbus_bridge_end); + + for (i = 0; i < mvebu_mbus_dram_info.num_cs; i++) { + struct mbus_dram_window *w; + u64 base, size, end; + + w = &mvebu_mbus_dram_info.cs[i]; + base = w->base; + size = w->size; + end = base + size; + + /* + * The CS is fully enclosed inside the MBus bridge + * area, so ignore it. + */ + if (base >= mbus_bridge_base && end <= mbus_bridge_end) + continue; + + /* + * Beginning of CS overlaps with end of MBus, raise CS + * base address, and shrink its size. + */ + if (base >= mbus_bridge_base && end > mbus_bridge_end) { + size -= mbus_bridge_end - base; + base = mbus_bridge_end; + } + + /* + * End of CS overlaps with beginning of MBus, shrink + * CS size. + */ + if (base < mbus_bridge_base && end > mbus_bridge_base) + size -= end - mbus_bridge_base; + + w = &mvebu_mbus_dram_info_nooverlap.cs[cs_nooverlap++]; + w->cs_index = i; + w->mbus_attr = 0xf & ~(1 << i); + if (mbus->hw_io_coherency) + w->mbus_attr |= ATTR_HW_COHERENCY; + w->base = base; + w->size = size; + } + + mvebu_mbus_dram_info_nooverlap.mbus_dram_target_id = TARGET_DDR; + mvebu_mbus_dram_info_nooverlap.num_cs = cs_nooverlap; +} + static void __init mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus) { @@ -964,6 +1080,7 @@ static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus, mvebu_mbus_disable_window(mbus, win); mbus->soc->setup_cpu_target(mbus); + mvebu_mbus_setup_cpu_target_nooverlap(mbus); if (is_coherent) writel(UNIT_SYNC_BARRIER_ALL, diff --git a/include/linux/mbus.h b/include/linux/mbus.h index 611b69fa8594..1f7bc630d225 100644 --- a/include/linux/mbus.h +++ b/include/linux/mbus.h @@ -54,11 +54,16 @@ struct mbus_dram_target_info */ #ifdef CONFIG_PLAT_ORION extern const struct mbus_dram_target_info *mv_mbus_dram_info(void); +extern const struct mbus_dram_target_info *mv_mbus_dram_info_nooverlap(void); #else static inline const struct mbus_dram_target_info *mv_mbus_dram_info(void) { return NULL; } +static inline const struct mbus_dram_target_info *mv_mbus_dram_info_nooverlap(void) +{ + return NULL; +} #endif int mvebu_mbus_save_cpu_target(u32 *store_addr);