From 5a523605afa7d3b54b2e7041f8c9e6bc39872a7e Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 10 Sep 2013 15:45:05 +0530 Subject: [PATCH 1/3] regulator: core: provide fixed voltage in desc for single voltage rail If given rail has the single voltage (n_voltages = 1) then provide the rail voltage through regulator descriptor so that core can use this value for finding voltage. This will avoid the implementation of the callback for get_voltage() or list_voltage() callback on regulator driver. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- drivers/regulator/core.c | 5 ++++- include/linux/regulator/driver.h | 2 ++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index a01b8b3b70ca..abc899ed1ebf 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2489,6 +2489,8 @@ static int _regulator_get_voltage(struct regulator_dev *rdev) ret = rdev->desc->ops->get_voltage(rdev); } else if (rdev->desc->ops->list_voltage) { ret = rdev->desc->ops->list_voltage(rdev, 0); + } else if (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1)) { + ret = rdev->desc->fixed_uV; } else { return -EINVAL; } @@ -3170,7 +3172,8 @@ static int add_regulator_attributes(struct regulator_dev *rdev) /* some attributes need specific methods to be displayed */ if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) || (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) || - (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0)) { + (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0) || + (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1))) { status = device_create_file(dev, &dev_attr_microvolts); if (status < 0) return status; diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 67e13aa5a478..9e8241a9f28f 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -207,6 +207,7 @@ enum regulator_type { * @min_uV: Voltage given by the lowest selector (if linear mapping) * @uV_step: Voltage increase with each selector (if linear mapping) * @linear_min_sel: Minimal selector for starting linear mapping + * @fixed_uV: Fixed voltage of rails. * @ramp_delay: Time to settle down after voltage change (unit: uV/us) * @volt_table: Voltage mapping table (if table based mapping) * @@ -239,6 +240,7 @@ struct regulator_desc { unsigned int min_uV; unsigned int uV_step; unsigned int linear_min_sel; + int fixed_uV; unsigned int ramp_delay; const struct regulator_linear_range *linear_ranges; From c368e5fc2a190923b786f2de3e79430ea3566a25 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 10 Sep 2013 15:45:06 +0530 Subject: [PATCH 2/3] regulator: fixed: get rid of {get|list}_voltage() Provide the rail supply voltage through descriptor to the core and remove the callbacks which implement the get_voltage and list_voltage. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- drivers/regulator/fixed.c | 28 ++-------------------------- 1 file changed, 2 insertions(+), 26 deletions(-) diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index 7610920014d7..de811f3b921b 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -34,7 +34,6 @@ struct fixed_voltage_data { struct regulator_desc desc; struct regulator_dev *dev; - int microvolts; }; @@ -108,30 +107,7 @@ of_get_fixed_voltage_config(struct device *dev) return config; } -static int fixed_voltage_get_voltage(struct regulator_dev *dev) -{ - struct fixed_voltage_data *data = rdev_get_drvdata(dev); - - if (data->microvolts) - return data->microvolts; - else - return -EINVAL; -} - -static int fixed_voltage_list_voltage(struct regulator_dev *dev, - unsigned selector) -{ - struct fixed_voltage_data *data = rdev_get_drvdata(dev); - - if (selector != 0) - return -EINVAL; - - return data->microvolts; -} - static struct regulator_ops fixed_voltage_ops = { - .get_voltage = fixed_voltage_get_voltage, - .list_voltage = fixed_voltage_list_voltage, }; static int reg_fixed_voltage_probe(struct platform_device *pdev) @@ -186,7 +162,7 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev) if (config->microvolts) drvdata->desc.n_voltages = 1; - drvdata->microvolts = config->microvolts; + drvdata->desc.fixed_uV = config->microvolts; if (config->gpio >= 0) cfg.ena_gpio = config->gpio; @@ -222,7 +198,7 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev) platform_set_drvdata(pdev, drvdata); dev_dbg(&pdev->dev, "%s supplying %duV\n", drvdata->desc.name, - drvdata->microvolts); + drvdata->desc.fixed_uV); return 0; From 609d5f6ddc18d05801646c869fcf4d0537b9110b Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Mon, 14 Oct 2013 17:46:36 +0900 Subject: [PATCH 3/3] regulator: fixed: Fix checkpatch issue Fix the following checkpatch warnings. WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/regulator/fixed.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index de811f3b921b..5ea64b94341c 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -168,17 +168,15 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev) cfg.ena_gpio = config->gpio; cfg.ena_gpio_invert = !config->enable_high; if (config->enabled_at_boot) { - if (config->enable_high) { + if (config->enable_high) cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; - } else { + else cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW; - } } else { - if (config->enable_high) { + if (config->enable_high) cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW; - } else { + else cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; - } } if (config->gpio_is_open_drain) cfg.ena_gpio_flags |= GPIOF_OPEN_DRAIN;