From 6f6bbc186dc8e4e0c628db7decbd1a5e02cb5fd8 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 26 Jul 2012 02:30:53 +0000 Subject: [PATCH] ethtool.h: MDI setting support This change modifies the core ethtool struct to allow a driver to support setting of MDI/MDI-X state for twisted pair wiring. This change uses a previously reserved u8 and should not change any binary compatibility of ethtool. Also as per Ben Hutchings' suggestion, the capabilities are stored in a separate byte so the driver can report if it supports changing settings. see thread: http://kerneltrap.org/mailarchive/linux-netdev/2010/11/17/6289820/thread see ethtool patches titled: ethtool: allow setting MDI-X state Signed-off-by: Jesse Brandeburg CC: Ben Hutchings Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher --- include/linux/ethtool.h | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 21eff418091b..fcb4f8e60c1c 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -45,8 +45,10 @@ struct ethtool_cmd { * bits) in Mbps. Please use * ethtool_cmd_speed()/_set() to * access it */ - __u8 eth_tp_mdix; - __u8 reserved2; + __u8 eth_tp_mdix; /* twisted pair MDI-X status */ + __u8 eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set, + * link should be renegotiated if necessary + */ __u32 lp_advertising; /* Features the link partner advertises */ __u32 reserved[2]; }; @@ -1229,10 +1231,13 @@ struct ethtool_ops { #define AUTONEG_DISABLE 0x00 #define AUTONEG_ENABLE 0x01 -/* Mode MDI or MDI-X */ -#define ETH_TP_MDI_INVALID 0x00 -#define ETH_TP_MDI 0x01 -#define ETH_TP_MDI_X 0x02 +/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then + * the driver is required to renegotiate link + */ +#define ETH_TP_MDI_INVALID 0x00 /* status: unknown; control: unsupported */ +#define ETH_TP_MDI 0x01 /* status: MDI; control: force MDI */ +#define ETH_TP_MDI_X 0x02 /* status: MDI-X; control: force MDI-X */ +#define ETH_TP_MDI_AUTO 0x03 /* control: auto-select */ /* Wake-On-Lan options. */ #define WAKE_PHY (1 << 0)