ath5k: Update gain_F calibration code and add documentation
* Update and cleanup rf gain optimization code * Add comments and refferences to docs and use sane function names * Use only step index on ath5k_gain, no need to have a pointer to the current step since we can determine te step from it's index, this also allows us to put all other structs on rfgain.h and cleanup ath5k.h a little * No need for ah_rfgain variable, we use ah_gain.g_state for everything * Tested on RF2112B chip but gain_F calibration is not yet done (we will finish this on the next patch where we'll rewrite rf-buffer handling) * Use initial rf gain settings for 2316 and 2317 SoCs introduced on a previous patch It seems big but it's mostly cleanup, very few functional changes have been made on phy.c Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
parent
33a31826b4
commit
6f3b414aca
|
@ -649,49 +649,21 @@ struct ath5k_beacon_state {
|
|||
|
||||
enum ath5k_rfgain {
|
||||
AR5K_RFGAIN_INACTIVE = 0,
|
||||
AR5K_RFGAIN_ACTIVE,
|
||||
AR5K_RFGAIN_READ_REQUESTED,
|
||||
AR5K_RFGAIN_NEED_CHANGE,
|
||||
};
|
||||
|
||||
#define AR5K_GAIN_CRN_FIX_BITS_5111 4
|
||||
#define AR5K_GAIN_CRN_FIX_BITS_5112 7
|
||||
#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112
|
||||
#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15
|
||||
#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20
|
||||
#define AR5K_GAIN_CCK_PROBE_CORR 5
|
||||
#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15
|
||||
#define AR5K_GAIN_STEP_COUNT 10
|
||||
#define AR5K_GAIN_PARAM_TX_CLIP 0
|
||||
#define AR5K_GAIN_PARAM_PD_90 1
|
||||
#define AR5K_GAIN_PARAM_PD_84 2
|
||||
#define AR5K_GAIN_PARAM_GAIN_SEL 3
|
||||
#define AR5K_GAIN_PARAM_MIX_ORN 0
|
||||
#define AR5K_GAIN_PARAM_PD_138 1
|
||||
#define AR5K_GAIN_PARAM_PD_137 2
|
||||
#define AR5K_GAIN_PARAM_PD_136 3
|
||||
#define AR5K_GAIN_PARAM_PD_132 4
|
||||
#define AR5K_GAIN_PARAM_PD_131 5
|
||||
#define AR5K_GAIN_PARAM_PD_130 6
|
||||
#define AR5K_GAIN_CHECK_ADJUST(_g) \
|
||||
((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high)
|
||||
|
||||
struct ath5k_gain_opt_step {
|
||||
s16 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS];
|
||||
s32 gos_gain;
|
||||
};
|
||||
|
||||
struct ath5k_gain {
|
||||
u32 g_step_idx;
|
||||
u32 g_current;
|
||||
u32 g_target;
|
||||
u32 g_low;
|
||||
u32 g_high;
|
||||
u32 g_f_corr;
|
||||
u32 g_active;
|
||||
const struct ath5k_gain_opt_step *g_step;
|
||||
u8 g_step_idx;
|
||||
u8 g_current;
|
||||
u8 g_target;
|
||||
u8 g_low;
|
||||
u8 g_high;
|
||||
u8 g_f_corr;
|
||||
u8 g_state;
|
||||
};
|
||||
|
||||
|
||||
/********************\
|
||||
COMMON DEFINITIONS
|
||||
\********************/
|
||||
|
@ -1053,7 +1025,6 @@ struct ath5k_hw {
|
|||
bool ah_running;
|
||||
bool ah_single_chip;
|
||||
bool ah_combined_mic;
|
||||
enum ath5k_rfgain ah_rf_gain;
|
||||
|
||||
u32 ah_mac_srev;
|
||||
u16 ah_mac_version;
|
||||
|
@ -1262,9 +1233,9 @@ extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_cha
|
|||
|
||||
/* Initialize RF */
|
||||
extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode);
|
||||
extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq);
|
||||
extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah);
|
||||
extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah);
|
||||
extern int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq);
|
||||
extern enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah);
|
||||
extern int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah);
|
||||
/* PHY/RF channel functions */
|
||||
extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
|
||||
extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
|
||||
|
|
|
@ -331,7 +331,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
|
|||
ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
|
||||
ath5k_hw_set_opmode(ah);
|
||||
|
||||
ath5k_hw_set_rfgain_opt(ah);
|
||||
ath5k_hw_rfgain_opt_init(ah);
|
||||
|
||||
return ah;
|
||||
err_free:
|
||||
|
|
|
@ -2518,7 +2518,7 @@ ath5k_calibrate(unsigned long data)
|
|||
ieee80211_frequency_to_channel(sc->curchan->center_freq),
|
||||
sc->curchan->hw_value);
|
||||
|
||||
if (ath5k_hw_get_rf_gain(ah) == AR5K_RFGAIN_NEED_CHANGE) {
|
||||
if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) {
|
||||
/*
|
||||
* Rfgain is out of bounds, reset the chip
|
||||
* to load new gain values.
|
||||
|
|
|
@ -78,10 +78,104 @@ static unsigned int ath5k_hw_rfregs_op(u32 *rf, u32 offset, u32 reg, u32 bits,
|
|||
return data;
|
||||
}
|
||||
|
||||
static u32 ath5k_hw_rfregs_gainf_corr(struct ath5k_hw *ah)
|
||||
/**********************\
|
||||
* RF Gain optimization *
|
||||
\**********************/
|
||||
|
||||
/*
|
||||
* This code is used to optimize rf gain on different environments
|
||||
* (temprature mostly) based on feedback from a power detector.
|
||||
*
|
||||
* It's only used on RF5111 and RF5112, later RF chips seem to have
|
||||
* auto adjustment on hw -notice they have a much smaller BANK 7 and
|
||||
* no gain optimization ladder-.
|
||||
*
|
||||
* For more infos check out this patent doc
|
||||
* http://www.freepatentsonline.com/7400691.html
|
||||
*
|
||||
* This paper describes power drops as seen on the receiver due to
|
||||
* probe packets
|
||||
* http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues
|
||||
* %20of%20Power%20Control.pdf
|
||||
*
|
||||
* And this is the MadWiFi bug entry related to the above
|
||||
* http://madwifi-project.org/ticket/1659
|
||||
* with various measurements and diagrams
|
||||
*
|
||||
* TODO: Deal with power drops due to probes by setting an apropriate
|
||||
* tx power on the probe packets ! Make this part of the calibration process.
|
||||
*/
|
||||
|
||||
/* Initialize ah_gain durring attach */
|
||||
int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
|
||||
{
|
||||
/* Initialize the gain optimization values */
|
||||
switch (ah->ah_radio) {
|
||||
case AR5K_RF5111:
|
||||
ah->ah_gain.g_step_idx = rfgain_opt_5111.go_default;
|
||||
ah->ah_gain.g_low = 20;
|
||||
ah->ah_gain.g_high = 35;
|
||||
ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
|
||||
break;
|
||||
case AR5K_RF5112:
|
||||
ah->ah_gain.g_step_idx = rfgain_opt_5112.go_default;
|
||||
ah->ah_gain.g_low = 20;
|
||||
ah->ah_gain.g_high = 85;
|
||||
ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Schedule a gain probe check on the next transmited packet.
|
||||
* That means our next packet is going to be sent with lower
|
||||
* tx power and a Peak to Average Power Detector (PAPD) will try
|
||||
* to measure the gain.
|
||||
*
|
||||
* TODO: Use propper tx power setting for the probe packet so
|
||||
* that we don't observe a serious power drop on the receiver
|
||||
*
|
||||
* XXX: How about forcing a tx packet (bypassing PCU arbitrator etc)
|
||||
* just after we enable the probe so that we don't mess with
|
||||
* standard traffic ? Maybe it's time to use sw interrupts and
|
||||
* a probe tasklet !!!
|
||||
*/
|
||||
static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)
|
||||
{
|
||||
|
||||
/* Skip if gain calibration is inactive or
|
||||
* we already handle a probe request */
|
||||
if (ah->ah_gain.g_state != AR5K_RFGAIN_ACTIVE)
|
||||
return;
|
||||
|
||||
ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max,
|
||||
AR5K_PHY_PAPD_PROBE_TXPOWER) |
|
||||
AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE);
|
||||
|
||||
ah->ah_gain.g_state = AR5K_RFGAIN_READ_REQUESTED;
|
||||
|
||||
}
|
||||
|
||||
/* Calculate gain_F measurement correction
|
||||
* based on the current step for RF5112 rev. 2 */
|
||||
static u32 ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah)
|
||||
{
|
||||
u32 mix, step;
|
||||
u32 *rf;
|
||||
const struct ath5k_gain_opt *go;
|
||||
const struct ath5k_gain_opt_step *g_step;
|
||||
|
||||
/* Only RF5112 Rev. 2 supports it */
|
||||
if ((ah->ah_radio != AR5K_RF5112) ||
|
||||
(ah->ah_radio_5ghz_revision <= AR5K_SREV_RAD_5112A))
|
||||
return 0;
|
||||
|
||||
go = &rfgain_opt_5112;
|
||||
|
||||
g_step = &go->go_step[ah->ah_gain.g_step_idx];
|
||||
|
||||
if (ah->ah_rf_banks == NULL)
|
||||
return 0;
|
||||
|
@ -89,11 +183,15 @@ static u32 ath5k_hw_rfregs_gainf_corr(struct ath5k_hw *ah)
|
|||
rf = ah->ah_rf_banks;
|
||||
ah->ah_gain.g_f_corr = 0;
|
||||
|
||||
/* No VGA (Variable Gain Amplifier) override, skip */
|
||||
if (ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0, false) != 1)
|
||||
return 0;
|
||||
|
||||
/* Mix gain stepping */
|
||||
step = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 4, 32, 0, false);
|
||||
mix = ah->ah_gain.g_step->gos_param[0];
|
||||
|
||||
/* Mix gain override */
|
||||
mix = g_step->gos_param[0];
|
||||
|
||||
switch (mix) {
|
||||
case 3:
|
||||
|
@ -113,9 +211,13 @@ static u32 ath5k_hw_rfregs_gainf_corr(struct ath5k_hw *ah)
|
|||
return ah->ah_gain.g_f_corr;
|
||||
}
|
||||
|
||||
static bool ath5k_hw_rfregs_gain_readback(struct ath5k_hw *ah)
|
||||
/* Check if current gain_F measurement is in the range of our
|
||||
* power detector windows. If we get a measurement outside range
|
||||
* we know it's not accurate (detectors can't measure anything outside
|
||||
* their detection window) so we must ignore it */
|
||||
static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah)
|
||||
{
|
||||
u32 step, mix, level[4];
|
||||
u32 step, mix_ovr, level[4];
|
||||
u32 *rf;
|
||||
|
||||
if (ah->ah_rf_banks == NULL)
|
||||
|
@ -127,20 +229,20 @@ static bool ath5k_hw_rfregs_gain_readback(struct ath5k_hw *ah)
|
|||
step = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 6, 37, 0,
|
||||
false);
|
||||
level[0] = 0;
|
||||
level[1] = (step == 0x3f) ? 0x32 : step + 4;
|
||||
level[2] = (step != 0x3f) ? 0x40 : level[0];
|
||||
level[3] = level[2] + 0x32;
|
||||
level[1] = (step == 63) ? 50 : step + 4;
|
||||
level[2] = (step != 63) ? 64 : level[0];
|
||||
level[3] = level[2] + 50 ;
|
||||
|
||||
ah->ah_gain.g_high = level[3] -
|
||||
(step == 0x3f ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5);
|
||||
(step == 63 ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5);
|
||||
ah->ah_gain.g_low = level[0] +
|
||||
(step == 0x3f ? AR5K_GAIN_DYN_ADJUST_LO_MARGIN : 0);
|
||||
(step == 63 ? AR5K_GAIN_DYN_ADJUST_LO_MARGIN : 0);
|
||||
} else {
|
||||
mix = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0,
|
||||
mix_ovr = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0,
|
||||
false);
|
||||
level[0] = level[2] = 0;
|
||||
|
||||
if (mix == 1) {
|
||||
if (mix_ovr == 1) {
|
||||
level[1] = level[3] = 83;
|
||||
} else {
|
||||
level[1] = level[3] = 107;
|
||||
|
@ -154,9 +256,12 @@ static bool ath5k_hw_rfregs_gain_readback(struct ath5k_hw *ah)
|
|||
ah->ah_gain.g_current <= level[3]);
|
||||
}
|
||||
|
||||
static s32 ath5k_hw_rfregs_gain_adjust(struct ath5k_hw *ah)
|
||||
/* Perform gain_F adjustment by choosing the right set
|
||||
* of parameters from rf gain optimization ladder */
|
||||
static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah)
|
||||
{
|
||||
const struct ath5k_gain_opt *go;
|
||||
const struct ath5k_gain_opt_step *g_step;
|
||||
int ret = 0;
|
||||
|
||||
switch (ah->ah_radio) {
|
||||
|
@ -170,35 +275,39 @@ static s32 ath5k_hw_rfregs_gain_adjust(struct ath5k_hw *ah)
|
|||
return 0;
|
||||
}
|
||||
|
||||
ah->ah_gain.g_step = &go->go_step[ah->ah_gain.g_step_idx];
|
||||
g_step = &go->go_step[ah->ah_gain.g_step_idx];
|
||||
|
||||
if (ah->ah_gain.g_current >= ah->ah_gain.g_high) {
|
||||
|
||||
/* Reached maximum */
|
||||
if (ah->ah_gain.g_step_idx == 0)
|
||||
return -1;
|
||||
|
||||
for (ah->ah_gain.g_target = ah->ah_gain.g_current;
|
||||
ah->ah_gain.g_target >= ah->ah_gain.g_high &&
|
||||
ah->ah_gain.g_step_idx > 0;
|
||||
ah->ah_gain.g_step =
|
||||
&go->go_step[ah->ah_gain.g_step_idx])
|
||||
g_step = &go->go_step[ah->ah_gain.g_step_idx])
|
||||
ah->ah_gain.g_target -= 2 *
|
||||
(go->go_step[--(ah->ah_gain.g_step_idx)].gos_gain -
|
||||
ah->ah_gain.g_step->gos_gain);
|
||||
g_step->gos_gain);
|
||||
|
||||
ret = 1;
|
||||
goto done;
|
||||
}
|
||||
|
||||
if (ah->ah_gain.g_current <= ah->ah_gain.g_low) {
|
||||
|
||||
/* Reached minimum */
|
||||
if (ah->ah_gain.g_step_idx == (go->go_steps_count - 1))
|
||||
return -2;
|
||||
|
||||
for (ah->ah_gain.g_target = ah->ah_gain.g_current;
|
||||
ah->ah_gain.g_target <= ah->ah_gain.g_low &&
|
||||
ah->ah_gain.g_step_idx < go->go_steps_count-1;
|
||||
ah->ah_gain.g_step =
|
||||
&go->go_step[ah->ah_gain.g_step_idx])
|
||||
g_step = &go->go_step[ah->ah_gain.g_step_idx])
|
||||
ah->ah_gain.g_target -= 2 *
|
||||
(go->go_step[++ah->ah_gain.g_step_idx].gos_gain -
|
||||
ah->ah_gain.g_step->gos_gain);
|
||||
g_step->gos_gain);
|
||||
|
||||
ret = 2;
|
||||
goto done;
|
||||
|
@ -213,6 +322,135 @@ done:
|
|||
return ret;
|
||||
}
|
||||
|
||||
/* Main callback for thermal rf gain calibration engine
|
||||
* Check for a new gain reading and schedule an adjustment
|
||||
* if needed.
|
||||
*
|
||||
* TODO: Use sw interrupt to schedule reset if gain_F needs
|
||||
* adjustment */
|
||||
enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah)
|
||||
{
|
||||
u32 data, type;
|
||||
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
|
||||
|
||||
ATH5K_TRACE(ah->ah_sc);
|
||||
|
||||
if (ah->ah_rf_banks == NULL ||
|
||||
ah->ah_gain.g_state == AR5K_RFGAIN_INACTIVE)
|
||||
return AR5K_RFGAIN_INACTIVE;
|
||||
|
||||
/* No check requested, either engine is inactive
|
||||
* or an adjustment is already requested */
|
||||
if (ah->ah_gain.g_state != AR5K_RFGAIN_READ_REQUESTED)
|
||||
goto done;
|
||||
|
||||
/* Read the PAPD (Peak to Average Power Detector)
|
||||
* register */
|
||||
data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE);
|
||||
|
||||
/* No probe is scheduled, read gain_F measurement */
|
||||
if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) {
|
||||
ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S;
|
||||
type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE);
|
||||
|
||||
/* If tx packet is CCK correct the gain_F measurement
|
||||
* by cck ofdm gain delta */
|
||||
if (type == AR5K_PHY_PAPD_PROBE_TYPE_CCK) {
|
||||
if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A)
|
||||
ah->ah_gain.g_current +=
|
||||
ee->ee_cck_ofdm_gain_delta;
|
||||
else
|
||||
ah->ah_gain.g_current +=
|
||||
AR5K_GAIN_CCK_PROBE_CORR;
|
||||
}
|
||||
|
||||
/* Further correct gain_F measurement for
|
||||
* RF5112A radios */
|
||||
if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) {
|
||||
ath5k_hw_rf_gainf_corr(ah);
|
||||
ah->ah_gain.g_current =
|
||||
ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ?
|
||||
(ah->ah_gain.g_current-ah->ah_gain.g_f_corr) :
|
||||
0;
|
||||
}
|
||||
|
||||
/* Check if measurement is ok and if we need
|
||||
* to adjust gain, schedule a gain adjustment,
|
||||
* else switch back to the acive state */
|
||||
if (ath5k_hw_rf_check_gainf_readback(ah) &&
|
||||
AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) &&
|
||||
ath5k_hw_rf_gainf_adjust(ah)) {
|
||||
ah->ah_gain.g_state = AR5K_RFGAIN_NEED_CHANGE;
|
||||
} else {
|
||||
ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
|
||||
}
|
||||
}
|
||||
|
||||
done:
|
||||
return ah->ah_gain.g_state;
|
||||
}
|
||||
|
||||
/* Write initial rf gain table to set the RF sensitivity
|
||||
* this one works on all RF chips and has nothing to do
|
||||
* with gain_F calibration */
|
||||
int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq)
|
||||
{
|
||||
const struct ath5k_ini_rfgain *ath5k_rfg;
|
||||
unsigned int i, size;
|
||||
|
||||
switch (ah->ah_radio) {
|
||||
case AR5K_RF5111:
|
||||
ath5k_rfg = rfgain_5111;
|
||||
size = ARRAY_SIZE(rfgain_5111);
|
||||
break;
|
||||
case AR5K_RF5112:
|
||||
ath5k_rfg = rfgain_5112;
|
||||
size = ARRAY_SIZE(rfgain_5112);
|
||||
break;
|
||||
case AR5K_RF2413:
|
||||
ath5k_rfg = rfgain_2413;
|
||||
size = ARRAY_SIZE(rfgain_2413);
|
||||
break;
|
||||
case AR5K_RF2316:
|
||||
ath5k_rfg = rfgain_2316;
|
||||
size = ARRAY_SIZE(rfgain_2316);
|
||||
break;
|
||||
case AR5K_RF5413:
|
||||
ath5k_rfg = rfgain_5413;
|
||||
size = ARRAY_SIZE(rfgain_5413);
|
||||
break;
|
||||
case AR5K_RF2317:
|
||||
case AR5K_RF2425:
|
||||
ath5k_rfg = rfgain_2425;
|
||||
size = ARRAY_SIZE(rfgain_2425);
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
switch (freq) {
|
||||
case AR5K_INI_RFGAIN_2GHZ:
|
||||
case AR5K_INI_RFGAIN_5GHZ:
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
for (i = 0; i < size; i++) {
|
||||
AR5K_REG_WAIT(i);
|
||||
ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq],
|
||||
(u32)ath5k_rfg[i].rfg_register);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
|
||||
/********************\
|
||||
* RF Registers setup *
|
||||
\********************/
|
||||
|
||||
/*
|
||||
* Read EEPROM Calibration data, modify RF Banks and Initialize RF5111
|
||||
*/
|
||||
|
@ -311,6 +549,8 @@ static int ath5k_hw_rf5111_rfregs(struct ath5k_hw *ah,
|
|||
ath5k_hw_reg_write(ah, rf[i], rfb_5111[i].rfb_ctrl_register);
|
||||
}
|
||||
|
||||
ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -407,6 +647,9 @@ static int ath5k_hw_rf5112_rfregs(struct ath5k_hw *ah,
|
|||
for (i = 0; i < rf_size; i++)
|
||||
ath5k_hw_reg_write(ah, rf[i], rf_ini[i].rfb_ctrl_register);
|
||||
|
||||
|
||||
ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -536,125 +779,12 @@ int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel,
|
|||
}
|
||||
|
||||
ret = func(ah, channel, mode);
|
||||
if (!ret)
|
||||
ah->ah_rf_gain = AR5K_RFGAIN_INACTIVE;
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq)
|
||||
{
|
||||
const struct ath5k_ini_rfgain *ath5k_rfg;
|
||||
unsigned int i, size;
|
||||
|
||||
switch (ah->ah_radio) {
|
||||
case AR5K_RF5111:
|
||||
ath5k_rfg = rfgain_5111;
|
||||
size = ARRAY_SIZE(rfgain_5111);
|
||||
break;
|
||||
case AR5K_RF5112:
|
||||
ath5k_rfg = rfgain_5112;
|
||||
size = ARRAY_SIZE(rfgain_5112);
|
||||
break;
|
||||
case AR5K_RF5413:
|
||||
ath5k_rfg = rfgain_5413;
|
||||
size = ARRAY_SIZE(rfgain_5413);
|
||||
break;
|
||||
case AR5K_RF2413:
|
||||
ath5k_rfg = rfgain_2413;
|
||||
size = ARRAY_SIZE(rfgain_2413);
|
||||
break;
|
||||
case AR5K_RF2425:
|
||||
ath5k_rfg = rfgain_2425;
|
||||
size = ARRAY_SIZE(rfgain_2425);
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
switch (freq) {
|
||||
case AR5K_INI_RFGAIN_2GHZ:
|
||||
case AR5K_INI_RFGAIN_5GHZ:
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
for (i = 0; i < size; i++) {
|
||||
AR5K_REG_WAIT(i);
|
||||
ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq],
|
||||
(u32)ath5k_rfg[i].rfg_register);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah)
|
||||
{
|
||||
u32 data, type;
|
||||
|
||||
ATH5K_TRACE(ah->ah_sc);
|
||||
|
||||
if (ah->ah_rf_banks == NULL || !ah->ah_gain.g_active ||
|
||||
ah->ah_version <= AR5K_AR5211)
|
||||
return AR5K_RFGAIN_INACTIVE;
|
||||
|
||||
if (ah->ah_rf_gain != AR5K_RFGAIN_READ_REQUESTED)
|
||||
goto done;
|
||||
|
||||
data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE);
|
||||
|
||||
if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) {
|
||||
ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S;
|
||||
type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE);
|
||||
|
||||
if (type == AR5K_PHY_PAPD_PROBE_TYPE_CCK)
|
||||
ah->ah_gain.g_current += AR5K_GAIN_CCK_PROBE_CORR;
|
||||
|
||||
if (ah->ah_radio >= AR5K_RF5112) {
|
||||
ath5k_hw_rfregs_gainf_corr(ah);
|
||||
ah->ah_gain.g_current =
|
||||
ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ?
|
||||
(ah->ah_gain.g_current-ah->ah_gain.g_f_corr) :
|
||||
0;
|
||||
}
|
||||
|
||||
if (ath5k_hw_rfregs_gain_readback(ah) &&
|
||||
AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) &&
|
||||
ath5k_hw_rfregs_gain_adjust(ah))
|
||||
ah->ah_rf_gain = AR5K_RFGAIN_NEED_CHANGE;
|
||||
}
|
||||
|
||||
done:
|
||||
return ah->ah_rf_gain;
|
||||
}
|
||||
|
||||
int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah)
|
||||
{
|
||||
/* Initialize the gain optimization values */
|
||||
switch (ah->ah_radio) {
|
||||
case AR5K_RF5111:
|
||||
ah->ah_gain.g_step_idx = rfgain_opt_5111.go_default;
|
||||
ah->ah_gain.g_step =
|
||||
&rfgain_opt_5111.go_step[ah->ah_gain.g_step_idx];
|
||||
ah->ah_gain.g_low = 20;
|
||||
ah->ah_gain.g_high = 35;
|
||||
ah->ah_gain.g_active = 1;
|
||||
break;
|
||||
case AR5K_RF5112:
|
||||
ah->ah_gain.g_step_idx = rfgain_opt_5112.go_default;
|
||||
ah->ah_gain.g_step =
|
||||
&rfgain_opt_5112.go_step[ah->ah_gain.g_step_idx];
|
||||
ah->ah_gain.g_low = 20;
|
||||
ah->ah_gain.g_high = 85;
|
||||
ah->ah_gain.g_active = 1;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**************************\
|
||||
PHY/RF channel functions
|
||||
|
@ -1176,13 +1306,8 @@ done:
|
|||
* as often as I/Q calibration.*/
|
||||
ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
|
||||
|
||||
/* Request RF gain */
|
||||
if (channel->hw_value & CHANNEL_5GHZ) {
|
||||
ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max,
|
||||
AR5K_PHY_PAPD_PROBE_TXPOWER) |
|
||||
AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE);
|
||||
ah->ah_rf_gain = AR5K_RFGAIN_READ_REQUESTED;
|
||||
}
|
||||
/* Initiate a gain_F calibration */
|
||||
ath5k_hw_request_rfgain_probe(ah);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
|
@ -441,9 +441,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
|
|||
s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
|
||||
s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
|
||||
|
||||
if (change_channel && ah->ah_rf_banks != NULL)
|
||||
ath5k_hw_get_rf_gain(ah);
|
||||
|
||||
|
||||
/*Wakeup the device*/
|
||||
ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
|
||||
|
@ -530,7 +527,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
|
|||
* Write initial RF gain settings
|
||||
* This should work for both 5111/5112
|
||||
*/
|
||||
ret = ath5k_hw_rfgain(ah, freq);
|
||||
ret = ath5k_hw_rfgain_init(ah, freq);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
|
|
|
@ -111,6 +111,7 @@ enum ath5k_rf_regs_idx {
|
|||
#define AR5K_RF5111_GAIN_I { 6, 29, 0 }
|
||||
#define AR5K_RF5111_PLO_SEL { 1, 4, 0 }
|
||||
#define AR5K_RF5111_RFGAIN_SEL { 1, 36, 0 }
|
||||
#define AR5K_RF5111_RFGAIN_STEP { 6, 37, 0 }
|
||||
/* Only on AR5212 BaseBand and up */
|
||||
#define AR5K_RF5111_WAIT_S { 5, 19, 0 }
|
||||
#define AR5K_RF5111_WAIT_I { 5, 24, 0 }
|
||||
|
@ -235,7 +236,9 @@ static const struct ath5k_ini_rfbuffer rfb_5111[] = {
|
|||
|
||||
/* BANK 7 (Common) len pos col */
|
||||
#define AR5K_RF5112X_GAIN_I { 6, 14, 0 }
|
||||
#define AR5K_RF5112X_MIXVGA_OVR { 1, 36, 0 }
|
||||
#define AR5K_RF5112X_MIXGAIN_OVR { 2, 37, 0 }
|
||||
#define AR5K_RF5112X_MIXGAIN_STEP { 4, 32, 0 }
|
||||
#define AR5K_RF5112X_PD_DELAY_A { 4, 58, 0 }
|
||||
#define AR5K_RF5112X_PD_DELAY_B { 4, 62, 0 }
|
||||
#define AR5K_RF5112X_PD_DELAY_XR { 4, 66, 0 }
|
||||
|
|
|
@ -441,12 +441,38 @@ static const struct ath5k_ini_rfgain rfgain_2425[] = {
|
|||
{ AR5K_RF_GAIN(63), { 0x00000000, 0x000000f9 } },
|
||||
};
|
||||
|
||||
#define AR5K_GAIN_CRN_FIX_BITS_5111 4
|
||||
#define AR5K_GAIN_CRN_FIX_BITS_5112 7
|
||||
#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112
|
||||
#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15
|
||||
#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20
|
||||
#define AR5K_GAIN_CCK_PROBE_CORR 5
|
||||
#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15
|
||||
#define AR5K_GAIN_STEP_COUNT 10
|
||||
|
||||
/* Check if our current measurement is inside our
|
||||
* current variable attenuation window */
|
||||
#define AR5K_GAIN_CHECK_ADJUST(_g) \
|
||||
((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high)
|
||||
|
||||
struct ath5k_gain_opt_step {
|
||||
s8 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS];
|
||||
s8 gos_gain;
|
||||
};
|
||||
|
||||
struct ath5k_gain_opt {
|
||||
u32 go_default;
|
||||
u32 go_steps_count;
|
||||
u8 go_default;
|
||||
u8 go_steps_count;
|
||||
const struct ath5k_gain_opt_step go_step[AR5K_GAIN_STEP_COUNT];
|
||||
};
|
||||
|
||||
/*
|
||||
* Parameters on gos_param:
|
||||
* 1) Tx clip PHY register
|
||||
* 2) PWD 90 RF register
|
||||
* 3) PWD 84 RF register
|
||||
* 4) RFGainSel RF register
|
||||
*/
|
||||
static const struct ath5k_gain_opt rfgain_opt_5111 = {
|
||||
4,
|
||||
9,
|
||||
|
@ -463,6 +489,16 @@ static const struct ath5k_gain_opt rfgain_opt_5111 = {
|
|||
}
|
||||
};
|
||||
|
||||
/*
|
||||
* Parameters on gos_param:
|
||||
* 1) Mixgain ovr RF register
|
||||
* 2) PWD 138 RF register
|
||||
* 3) PWD 137 RF register
|
||||
* 4) PWD 136 RF register
|
||||
* 5) PWD 132 RF register
|
||||
* 6) PWD 131 RF register
|
||||
* 7) PWD 130 RF register
|
||||
*/
|
||||
static const struct ath5k_gain_opt rfgain_opt_5112 = {
|
||||
1,
|
||||
8,
|
||||
|
|
Loading…
Reference in New Issue