ASoC: ux500: Drop pinctrl sleep support

Drop pinctrl default/sleep state switching code, as it was breaking the
capture interface by putting the I2S pins in hi-z mode regardless of its
usage status, and not giving any real benefit.

Pinctrl default mode configuration is already managed automatically by a
specific pinctrl hog.

Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Fabio Baltieri 2013-05-24 12:39:15 +02:00 committed by Mark Brown
parent da33d723bc
commit 6ee0b4b0ef
2 changed files with 2 additions and 60 deletions

View File

@ -15,7 +15,6 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/consumer.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/io.h>
@ -26,9 +25,6 @@
#include "ux500_msp_i2s.h"
/* MSP1/3 Tx/Rx usage protection */
static DEFINE_SPINLOCK(msp_rxtx_lock);
/* Protocol desciptors */
static const struct msp_protdesc prot_descs[] = {
{ /* I2S */
@ -356,24 +352,8 @@ static int configure_multichannel(struct ux500_msp *msp,
static int enable_msp(struct ux500_msp *msp, struct ux500_msp_config *config)
{
int status = 0, retval = 0;
int status = 0;
u32 reg_val_DMACR, reg_val_GCR;
unsigned long flags;
/* Check msp state whether in RUN or CONFIGURED Mode */
if (msp->msp_state == MSP_STATE_IDLE) {
spin_lock_irqsave(&msp_rxtx_lock, flags);
if (msp->pinctrl_rxtx_ref == 0 &&
!(IS_ERR(msp->pinctrl_p) || IS_ERR(msp->pinctrl_def))) {
retval = pinctrl_select_state(msp->pinctrl_p,
msp->pinctrl_def);
if (retval)
pr_err("could not set MSP defstate\n");
}
if (!retval)
msp->pinctrl_rxtx_ref++;
spin_unlock_irqrestore(&msp_rxtx_lock, flags);
}
/* Configure msp with protocol dependent settings */
configure_protocol(msp, config);
@ -630,8 +610,7 @@ int ux500_msp_i2s_trigger(struct ux500_msp *msp, int cmd, int direction)
int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir)
{
int status = 0, retval = 0;
unsigned long flags;
int status = 0;
dev_dbg(msp->dev, "%s: Enter (dir = 0x%01x).\n", __func__, dir);
@ -643,18 +622,6 @@ int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir)
(~(FRAME_GEN_ENABLE | SRG_ENABLE))),
msp->registers + MSP_GCR);
spin_lock_irqsave(&msp_rxtx_lock, flags);
WARN_ON(!msp->pinctrl_rxtx_ref);
msp->pinctrl_rxtx_ref--;
if (msp->pinctrl_rxtx_ref == 0 &&
!(IS_ERR(msp->pinctrl_p) || IS_ERR(msp->pinctrl_sleep))) {
retval = pinctrl_select_state(msp->pinctrl_p,
msp->pinctrl_sleep);
if (retval)
pr_err("could not set MSP sleepstate\n");
}
spin_unlock_irqrestore(&msp_rxtx_lock, flags);
writel(0, msp->registers + MSP_GCR);
writel(0, msp->registers + MSP_TCF);
writel(0, msp->registers + MSP_RCF);
@ -743,25 +710,6 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev,
dev_dbg(&pdev->dev, "I2S device-name: '%s'\n", i2s_cont->name);
msp->i2s_cont = i2s_cont;
msp->pinctrl_p = pinctrl_get(msp->dev);
if (IS_ERR(msp->pinctrl_p))
dev_err(&pdev->dev, "could not get MSP pinctrl\n");
else {
msp->pinctrl_def = pinctrl_lookup_state(msp->pinctrl_p,
PINCTRL_STATE_DEFAULT);
if (IS_ERR(msp->pinctrl_def)) {
dev_err(&pdev->dev,
"could not get MSP defstate (%li)\n",
PTR_ERR(msp->pinctrl_def));
}
msp->pinctrl_sleep = pinctrl_lookup_state(msp->pinctrl_p,
PINCTRL_STATE_SLEEP);
if (IS_ERR(msp->pinctrl_sleep))
dev_err(&pdev->dev,
"could not get MSP idlestate (%li)\n",
PTR_ERR(msp->pinctrl_def));
}
return 0;
}

View File

@ -528,12 +528,6 @@ struct ux500_msp {
int loopback_enable;
u32 backup_regs[MAX_MSP_BACKUP_REGS];
unsigned int f_bitclk;
/* Pin modes */
struct pinctrl *pinctrl_p;
struct pinctrl_state *pinctrl_def;
struct pinctrl_state *pinctrl_sleep;
/* Reference Count */
int pinctrl_rxtx_ref;
};
struct ux500_msp_dma_params {