tty: serial: 8250: Replace spaces with tabs

Indentation is changed to match the correct format of using tabs instead
of spaces wherever possible.

Signed-off-by: Anton Würfel <anton.wuerfel@fau.de>
Signed-off-by: Phillip Raffeck <phillip.raffeck@fau.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Cc: linux-kernel@i4.cs.fau.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Anton Wuerfel 2016-01-14 16:08:11 +01:00 committed by Greg Kroah-Hartman
parent 1a33e342cf
commit 6d7c157fc7
2 changed files with 8 additions and 8 deletions

View File

@ -721,7 +721,7 @@ static int pci_ni8430_init(struct pci_dev *dev)
*/
pcibios_resource_to_bus(dev->bus, &region, &dev->resource[bar]);
device_window = ((region.start + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00)
| MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
| MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
writel(device_window, p + MITE_IOWBSR1);
/* Set window access to go to RAMSEL IO address space */
@ -1744,7 +1744,7 @@ xr17v35x_has_slave(struct serial_private *priv)
const int dev_id = priv->dev->device;
return ((dev_id == PCI_DEVICE_ID_EXAR_XR17V4358) ||
(dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
(dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
}
static int
@ -1844,8 +1844,8 @@ pci_fastcom335_setup(struct serial_private *priv,
static int
pci_wch_ch353_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
port->port.flags |= UPF_FIXED_TYPE;
port->port.type = PORT_16550A;
@ -1854,8 +1854,8 @@ pci_wch_ch353_setup(struct serial_private *priv,
static int
pci_wch_ch38x_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
port->port.flags |= UPF_FIXED_TYPE;
port->port.type = PORT_16850;

View File

@ -53,7 +53,7 @@
#define DEBUG_AUTOCONF(fmt...) do { } while (0)
#endif
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
/*
* Here we define the default xmit fifo size used for each type of UART.
@ -2487,7 +2487,7 @@ serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios,
void
serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
struct ktermios *old)
{
struct uart_8250_port *up = up_to_u8250p(port);
unsigned char cval;