From a2934c7b363ddcc001964f2444649f909e583bef Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 3 Dec 2009 08:09:41 -0500 Subject: [PATCH 0001/1626] cifs: NULL out tcon, pSesInfo, and srvTcp pointers when chasing DFS referrals The scenario is this: The kernel gets EREMOTE and starts chasing a DFS referral at mount time. The tcon reference is put, which puts the session reference too, but neither pointer is zeroed out. The mount gets retried (goto try_mount_again) with new mount info. Session setup fails fails and rc ends up being non-zero. The code then falls through to the end and tries to put the previously freed tcon pointer again. Oops at: cifs_put_smb_ses+0x14/0xd0 Fix this by moving the initialization of the rc variable and the tcon, pSesInfo and srvTcp pointers below the try_mount_again label. Also, add a FreeXid() before the goto to prevent xid "leaks". Signed-off-by: Jeff Layton Reported-by: Gustavo Carvalho Homem CC: stable Signed-off-by: Steve French --- fs/cifs/connect.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 63ea83ff687f..3bbcaa716b3c 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2287,12 +2287,12 @@ int cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, char *mount_data_global, const char *devname) { - int rc = 0; + int rc; int xid; struct smb_vol *volume_info; - struct cifsSesInfo *pSesInfo = NULL; - struct cifsTconInfo *tcon = NULL; - struct TCP_Server_Info *srvTcp = NULL; + struct cifsSesInfo *pSesInfo; + struct cifsTconInfo *tcon; + struct TCP_Server_Info *srvTcp; char *full_path; char *mount_data = mount_data_global; #ifdef CONFIG_CIFS_DFS_UPCALL @@ -2301,6 +2301,10 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, int referral_walks_count = 0; try_mount_again: #endif + rc = 0; + tcon = NULL; + pSesInfo = NULL; + srvTcp = NULL; full_path = NULL; xid = GetXid(); @@ -2597,6 +2601,7 @@ remote_path_check: cleanup_volume_info(&volume_info); referral_walks_count++; + FreeXid(xid); goto try_mount_again; } #else /* No DFS support, return error on mount */ From a994b8fa669f16c50728328c3735722a3f20652e Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 7 Dec 2009 05:44:46 +0000 Subject: [PATCH 0002/1626] [CIFS] Enable mmap on forcedirectio mounts openoffice and gedit failed with 'direct' options Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/CHANGES | 4 +++- fs/cifs/cifsfs.c | 3 ++- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 094ea65afc85..7b2600b380d7 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -5,7 +5,9 @@ have duplicated data). Fix oops in cifs_lookup. Workaround problem mounting to OS/400 Netserve. Fix oops in cifs_get_tcp_session. Disable use of server inode numbers when server only partially supports them (e.g. for one server querying inode numbers on -FindFirst fails but QPathInfo queries works). +FindFirst fails but QPathInfo queries works). Fix oops with dfs in +cifs_put_smb_ses. Fix mmap to work on directio mounts (needed +for OpenOffice when on forcedirectio mount e.g.) Version 1.60 ------------- diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 29f1da761bbf..8c6a03627176 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -758,7 +758,7 @@ const struct file_operations cifs_file_ops = { }; const struct file_operations cifs_file_direct_ops = { - /* no mmap, no aio, no readv - + /* no aio, no readv - BB reevaluate whether they can be done with directio, no cache */ .read = cifs_user_read, .write = cifs_user_write, @@ -767,6 +767,7 @@ const struct file_operations cifs_file_direct_ops = { .lock = cifs_lock, .fsync = cifs_fsync, .flush = cifs_flush, + .mmap = cifs_file_mmap, .splice_read = generic_file_splice_read, #ifdef CONFIG_CIFS_POSIX .unlocked_ioctl = cifs_ioctl, From 70c66567d1e41d8b2186a2d198997a1c8d79c0c4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Petr=20=C5=A0tetiar?= Date: Wed, 9 Dec 2009 22:09:53 +0100 Subject: [PATCH 0003/1626] HID: blacklist ET&T TC5UH touchscreen controller MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds ET&T TC5UH touchscreen controller to HID blacklist, because this device is handled by input/usbtouchscreen driver. Signed-off-by: Petr Štetiar Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 3 +++ 2 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 80792d38d25c..389cd5f0a681 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1553,6 +1553,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) }, { HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) }, { HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 3839340e293a..b9de32b6b10d 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -166,6 +166,9 @@ #define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f #define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100 +#define USB_VENDOR_ID_ETT 0x0664 +#define USB_DEVICE_ID_TC5UH 0x0309 + #define USB_VENDOR_ID_EZKEY 0x0518 #define USB_DEVICE_ID_BTC_8193 0x0002 From 3975bc56305256af7689bcce62284fc62e09fc8f Mon Sep 17 00:00:00 2001 From: Robert Schedel Date: Fri, 11 Dec 2009 00:37:11 +0100 Subject: [PATCH 0004/1626] HID: Support 171 byte variant of Samsung USB IR receiver Extends the existing Samsung USB IrDA (0419:0001) quirk with newly reported 171 byte variant. It needs the same quirk as the other devices already supported by hid-samsung (wrong logical range) Refactors duplicate trace call into local helper function. The original bug report for the new variant is available at the second half of this ticket page: https://bugs.launchpad.net/bugs/326986 Signed-off-by: Robert Schedel Signed-off-by: Jiri Kosina --- drivers/hid/hid-samsung.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-) diff --git a/drivers/hid/hid-samsung.c b/drivers/hid/hid-samsung.c index 5b222eed0692..510dd1340597 100644 --- a/drivers/hid/hid-samsung.c +++ b/drivers/hid/hid-samsung.c @@ -39,7 +39,17 @@ * * 3. 135 byte report descriptor * Report #4 has an array field with logical range 0..17 instead of 1..14. + * + * 4. 171 byte report descriptor + * Report #3 has an array field with logical range 0..1 instead of 1..3. */ +static inline void samsung_dev_trace(struct hid_device *hdev, + unsigned int rsize) +{ + dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report " + "descriptor\n", rsize); +} + static void samsung_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int rsize) { @@ -47,8 +57,7 @@ static void samsung_report_fixup(struct hid_device *hdev, __u8 *rdesc, rdesc[177] == 0x75 && rdesc[178] == 0x30 && rdesc[179] == 0x95 && rdesc[180] == 0x01 && rdesc[182] == 0x40) { - dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report " - "descriptor\n", 184); + samsung_dev_trace(hdev, 184); rdesc[176] = 0xff; rdesc[178] = 0x08; rdesc[180] = 0x06; @@ -56,17 +65,21 @@ static void samsung_report_fixup(struct hid_device *hdev, __u8 *rdesc, } else if (rsize == 203 && rdesc[192] == 0x15 && rdesc[193] == 0x0 && rdesc[194] == 0x25 && rdesc[195] == 0x12) { - dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report " - "descriptor\n", 203); + samsung_dev_trace(hdev, 203); rdesc[193] = 0x1; rdesc[195] = 0xf; } else if (rsize == 135 && rdesc[124] == 0x15 && rdesc[125] == 0x0 && rdesc[126] == 0x25 && rdesc[127] == 0x11) { - dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report " - "descriptor\n", 135); + samsung_dev_trace(hdev, 135); rdesc[125] = 0x1; rdesc[127] = 0xe; + } else + if (rsize == 171 && rdesc[160] == 0x15 && rdesc[161] == 0x0 && + rdesc[162] == 0x25 && rdesc[163] == 0x01) { + samsung_dev_trace(hdev, 171); + rdesc[161] = 0x1; + rdesc[163] = 0x3; } } From 500f5a0bf5f0624dae34307010e240ec090e4cde Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Sun, 13 Dec 2009 22:48:54 +0100 Subject: [PATCH 0005/1626] reiserfs: Fix possible recursive lock While allocating the bitmap using vmalloc, we hold the reiserfs lock, which makes lockdep later reporting a possible deadlock as we may swap out pages to allocate memory and then take the reiserfs lock recursively: inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd0/312 [HC0[0]:SC0[0]:HE1:SE1] takes: (&REISERFS_SB(s)->lock){+.+.?.}, at: [] reiserfs_write_lock+0x28/0x40 {RECLAIM_FS-ON-W} state was registered at: [] mark_held_locks+0x62/0x90 [] lockdep_trace_alloc+0x9a/0xc0 [] kmem_cache_alloc+0x26/0xf0 [] __get_vm_area_node+0x6c/0xf0 [] __vmalloc_node+0x7e/0xa0 [] vmalloc+0x2b/0x30 [] reiserfs_init_bitmap_cache+0x39/0x70 [] reiserfs_fill_super+0x2e8/0xb90 [] get_sb_bdev+0x145/0x180 [] get_super_block+0x21/0x30 [] vfs_kern_mount+0x40/0xd0 [] do_kern_mount+0x39/0xd0 [] do_mount+0x2c7/0x6b0 [] sys_mount+0x66/0xa0 [] mount_block_root+0xc4/0x245 [] mount_root+0x59/0x5f [] prepare_namespace+0x111/0x14b [] kernel_init+0xcf/0xdb [] kernel_thread_helper+0x7/0x1c This is actually fine for two reasons: we call vmalloc at mount time then it's not in the swapping out path. Also the reiserfs lock can be acquired recursively, but since its implementation depends on a mutex, it's hard and not necessary worth it to teach that to lockdep. The lock is useless at mount time anyway, at least until we replay the journal. But let's remove it from this path later as this needs more thinking and is a sensible change. For now we can just relax the lock around vmalloc, Reported-by: Alexander Beregalov Signed-off-by: Frederic Weisbecker Cc: Chris Mason Cc: Ingo Molnar Cc: Thomas Gleixner --- fs/reiserfs/bitmap.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/reiserfs/bitmap.c b/fs/reiserfs/bitmap.c index 685495707181..65c872761177 100644 --- a/fs/reiserfs/bitmap.c +++ b/fs/reiserfs/bitmap.c @@ -1277,7 +1277,10 @@ int reiserfs_init_bitmap_cache(struct super_block *sb) struct reiserfs_bitmap_info *bitmap; unsigned int bmap_nr = reiserfs_bmap_count(sb); + /* Avoid lock recursion in fault case */ + reiserfs_write_unlock(sb); bitmap = vmalloc(sizeof(*bitmap) * bmap_nr); + reiserfs_write_lock(sb); if (bitmap == NULL) return -ENOMEM; From cb1c2e51c5a72f093b5af384b11d2f1c2abd6c13 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Sun, 13 Dec 2009 23:32:06 +0100 Subject: [PATCH 0006/1626] reiserfs: Fix reiserfs lock and journal lock inversion dependency When we were using the bkl, we didn't care about dependencies against other locks, but the mutex conversion created new ones, which is why we have reiserfs_mutex_lock_safe(), which unlocks the reiserfs lock before acquiring another mutex. But this trick actually fails if we have acquired the reiserfs lock recursively, as we try to unlock it to acquire the new mutex without inverted dependency, but we eventually only decrease its depth. This happens in the case of a nested inode creation/deletion. Say we have no space left on the device, we create an inode and tak the lock but fail to create its entry, then we release the inode using iput(), which calls reiserfs_delete_inode() that takes the reiserfs lock recursively. The path eventually ends up in journal_begin() where we try to take the journal safely but we fail because of the reiserfs lock recursion: [ INFO: possible circular locking dependency detected ] 2.6.32-06486-g053fe57 #2 ------------------------------------------------------- vi/23454 is trying to acquire lock: (&journal->j_mutex){+.+...}, at: [] do_journal_begin_r+0x64/0x2f0 but task is already holding lock: (&REISERFS_SB(s)->lock){+.+.+.}, at: [] reiserfs_write_lock+0x28/0x40 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&REISERFS_SB(s)->lock){+.+.+.}: [] validate_chain+0xa23/0xf70 [] __lock_acquire+0x4e5/0xa70 [] lock_acquire+0x7a/0xa0 [] mutex_lock_nested+0x5f/0x2b0 [] reiserfs_write_lock+0x28/0x40 [] do_journal_begin_r+0x6b/0x2f0 [] journal_begin+0x7f/0x120 [] reiserfs_remount+0x212/0x4d0 [] do_remount_sb+0x67/0x140 [] do_mount+0x436/0x6b0 [] sys_mount+0x66/0xa0 [] sysenter_do_call+0x12/0x36 -> #0 (&journal->j_mutex){+.+...}: [] validate_chain+0xf68/0xf70 [] __lock_acquire+0x4e5/0xa70 [] lock_acquire+0x7a/0xa0 [] mutex_lock_nested+0x5f/0x2b0 [] do_journal_begin_r+0x64/0x2f0 [] journal_begin+0x7f/0x120 [] reiserfs_delete_inode+0x9f/0x140 [] generic_delete_inode+0x9c/0x150 [] generic_drop_inode+0x3d/0x60 [] iput+0x47/0x50 [] reiserfs_create+0x16c/0x1c0 [] vfs_create+0xc1/0x130 [] do_filp_open+0x81c/0x920 [] do_sys_open+0x4f/0x110 [] sys_open+0x29/0x40 [] sysenter_do_call+0x12/0x36 other info that might help us debug this: 2 locks held by vi/23454: #0: (&sb->s_type->i_mutex_key#5){+.+.+.}, at: [] do_filp_open+0x27e/0x920 #1: (&REISERFS_SB(s)->lock){+.+.+.}, at: [] reiserfs_write_lock+0x28/0x40 stack backtrace: Pid: 23454, comm: vi Not tainted 2.6.32-06486-g053fe57 #2 Call Trace: [] ? printk+0x18/0x1e [] print_circular_bug+0xc0/0xd0 [] validate_chain+0xf68/0xf70 [] ? trace_hardirqs_off+0xb/0x10 [] __lock_acquire+0x4e5/0xa70 [] lock_acquire+0x7a/0xa0 [] ? do_journal_begin_r+0x64/0x2f0 [] mutex_lock_nested+0x5f/0x2b0 [] ? do_journal_begin_r+0x64/0x2f0 [] ? do_journal_begin_r+0x64/0x2f0 [] ? delete_one_xattr+0x0/0x1c0 [] do_journal_begin_r+0x64/0x2f0 [] journal_begin+0x7f/0x120 [] ? reiserfs_delete_xattrs+0x15/0x50 [] reiserfs_delete_inode+0x9f/0x140 [] ? generic_delete_inode+0x5f/0x150 [] ? reiserfs_delete_inode+0x0/0x140 [] generic_delete_inode+0x9c/0x150 [] generic_drop_inode+0x3d/0x60 [] iput+0x47/0x50 [] reiserfs_create+0x16c/0x1c0 [] ? inode_permission+0x7d/0xa0 [] vfs_create+0xc1/0x130 [] ? reiserfs_create+0x0/0x1c0 [] do_filp_open+0x81c/0x920 [] ? trace_hardirqs_off+0xb/0x10 [] ? _spin_unlock+0x1d/0x20 [] ? alloc_fd+0xba/0xf0 [] do_sys_open+0x4f/0x110 [] sys_open+0x29/0x40 [] sysenter_do_call+0x12/0x36 To fix this, use reiserfs_lock_once() from reiserfs_delete_inode() which prevents from adding reiserfs lock recursion. Reported-by: Alexander Beregalov Signed-off-by: Frederic Weisbecker Cc: Chris Mason Cc: Ingo Molnar Cc: Thomas Gleixner --- fs/reiserfs/inode.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 3a28e7751b3c..bd615dfe4ec7 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -31,11 +31,12 @@ void reiserfs_delete_inode(struct inode *inode) JOURNAL_PER_BALANCE_CNT * 2 + 2 * REISERFS_QUOTA_INIT_BLOCKS(inode->i_sb); struct reiserfs_transaction_handle th; + int depth; int err; truncate_inode_pages(&inode->i_data, 0); - reiserfs_write_lock(inode->i_sb); + depth = reiserfs_write_lock_once(inode->i_sb); /* The = 0 happens when we abort creating a new inode for some reason like lack of space.. */ if (!(inode->i_state & I_NEW) && INODE_PKEY(inode)->k_objectid != 0) { /* also handles bad_inode case */ @@ -74,7 +75,7 @@ void reiserfs_delete_inode(struct inode *inode) out: clear_inode(inode); /* note this must go after the journal_end to prevent deadlock */ inode->i_blocks = 0; - reiserfs_write_unlock(inode->i_sb); + reiserfs_write_unlock_once(inode->i_sb, depth); } static void _make_cpu_key(struct cpu_key *key, int version, __u32 dirid, From 149feb00d7c3f4f06896b245533c957b54e3e052 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Mon, 14 Dec 2009 09:24:20 -0500 Subject: [PATCH 0007/1626] ext4: remove unused #include Remove unused #include ('s) in fs/ext4/block_validity.c fs/ext4/mballoc.h Signed-off-by: Huang Weiyi Signed-off-by: "Theodore Ts'o" --- fs/ext4/block_validity.c | 1 - fs/ext4/mballoc.h | 1 - 2 files changed, 2 deletions(-) diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c index 4df8621ec31c..a60ab9aad57d 100644 --- a/fs/ext4/block_validity.c +++ b/fs/ext4/block_validity.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include "ext4.h" diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h index 0ca811061bc7..436521cae456 100644 --- a/fs/ext4/mballoc.h +++ b/fs/ext4/mballoc.h @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include "ext4_jbd2.h" From 84c664730374248adaf420c0846a6158d64413c7 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 21 Dec 2009 10:54:09 -0500 Subject: [PATCH 0008/1626] ext4: Don't ask about supporting ext2/3 in ext4 if ext4 is not configured Don't offer to build ext2/3 support into ext4 if ext4 itself is not configured on. Signed-off-by: David Howells Signed-off-by: "Theodore Ts'o" --- fs/ext4/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig index 9acf7e808139..9ed1bb1f319f 100644 --- a/fs/ext4/Kconfig +++ b/fs/ext4/Kconfig @@ -28,6 +28,7 @@ config EXT4_FS config EXT4_USE_FOR_EXT23 bool "Use ext4 for ext2/ext3 file systems" + depends on EXT4_FS depends on EXT3_FS=n || EXT2_FS=n default y help From 51b7e3c9fbe7d22d4e355101e9a73b44fc5c9feb Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 21 Dec 2009 10:56:09 -0500 Subject: [PATCH 0009/1626] ext4: add module aliases for ext2 and ext3 Add module aliases for ext2 and ext3 when CONFIG_EXT4_USE_FOR_EXT23 is set. This makes the existing user-space stuff like mkinitrd working as is. Signed-off-by: Takashi Iwai Signed-off-by: "Theodore Ts'o" --- fs/ext4/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 6ed9aa91f27d..0a06fe6f2bc2 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -4005,6 +4005,7 @@ static inline void unregister_as_ext2(void) { unregister_filesystem(&ext2_fs_type); } +MODULE_ALIAS("ext2"); #else static inline void register_as_ext2(void) { } static inline void unregister_as_ext2(void) { } @@ -4031,6 +4032,7 @@ static inline void unregister_as_ext3(void) { unregister_filesystem(&ext3_fs_type); } +MODULE_ALIAS("ext3"); #else static inline void register_as_ext3(void) { } static inline void unregister_as_ext3(void) { } From 034fb4c95fc0fed4ec4a50778127b92c6f2aec01 Mon Sep 17 00:00:00 2001 From: Surbhi Palande Date: Mon, 14 Dec 2009 09:53:52 -0500 Subject: [PATCH 0010/1626] ext4: replace BUG() with return -EIO in ext4_ext_get_blocks This patch fixes the Kernel BZ #14286. When the address of an extent corresponding to a valid block is corrupted, a -EIO should be reported instead of a BUG(). This situation should not normally not occur except in the case of a corrupted filesystem. If however it does, then the system should not panic directly but depending on the mount time options appropriate action should be taken. If the mount options so permit, the I/O should be gracefully aborted by returning a -EIO. http://bugzilla.kernel.org/show_bug.cgi?id=14286 Signed-off-by: Surbhi Palande Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 3a7928f825e4..8fd6c567964a 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3190,7 +3190,13 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode, * this situation is possible, though, _during_ tree modification; * this is why assert can't be put in ext4_ext_find_extent() */ - BUG_ON(path[depth].p_ext == NULL && depth != 0); + if (path[depth].p_ext == NULL && depth != 0) { + ext4_error(inode->i_sb, __func__, "bad extent address " + "inode: %lu, iblock: %d, depth: %d", + inode->i_ino, iblock, depth); + err = -EIO; + goto out2; + } eh = path[depth].p_hdr; ex = path[depth].p_ext; From b2ec153a637409bd87952d44409905b7d98418b8 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 14 Dec 2009 14:09:49 -0500 Subject: [PATCH 0011/1626] rt2x00: Fix rt2800usb detection in rt2800lib. rt2800lib incorrectly detected whether RT2800USB was enabled because it didn't account for a modularized RT2800USB driver. Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index eb1e1d00bec3..6e13650cb5da 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -37,7 +37,7 @@ #include #include "rt2x00.h" -#ifdef CONFIG_RT2800USB +#if defined(CONFIG_RT2800USB) || defined(CONFIG_RT2800USB_MODULE) #include "rt2x00usb.h" #endif #include "rt2800lib.h" @@ -1121,7 +1121,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) if (rt2x00_intf_is_usb(rt2x00dev)) { rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000); -#ifdef CONFIG_RT2800USB +#if defined(CONFIG_RT2800USB) || defined(CONFIG_RT2800USB_MODULE) rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, USB_MODE_RESET, REGISTER_TIMEOUT); #endif From d24deb2580823ab0b8425790c6f5d18e2ff749d8 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Fri, 4 Dec 2009 23:46:54 +0100 Subject: [PATCH 0012/1626] mac80211: Add define for TX headroom reserved by mac80211 itself. Add a definition of the amount of TX headroom reserved by mac80211 itself for its own purposes. Also add BUILD_BUG_ON to validate the value. This define can then be used by drivers to request additional TX headroom in the most efficient manner. Signed-off-by: Gertjan van Wingerde Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 6 ++++++ net/mac80211/main.c | 2 ++ 2 files changed, 8 insertions(+) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 2aff4906b2ae..538d6b761887 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1737,6 +1737,12 @@ static inline void ieee80211_rx_ni(struct ieee80211_hw *hw, local_bh_enable(); } +/* + * The TX headroom reserved by mac80211 for its own tx_status functions. + * This is enough for the radiotap header. + */ +#define IEEE80211_TX_STATUS_HEADROOM 13 + /** * ieee80211_tx_status - transmit status callback * diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 8116d1a96a4a..0d2d94881f1f 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -515,6 +515,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) * and we need some headroom for passing the frame to monitor * interfaces, but never both at the same time. */ + BUILD_BUG_ON(IEEE80211_TX_STATUS_HEADROOM != + sizeof(struct ieee80211_tx_status_rtap_hdr)); local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom, sizeof(struct ieee80211_tx_status_rtap_hdr)); From 656cb79322319a7bbafec7912d262142e9a38bc0 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 14 Dec 2009 13:12:45 -0800 Subject: [PATCH 0013/1626] drm/i915: In the debugfs interface, unmap our address instead of the page's. Fixes a BUG_ON in kmap_atomic for the following atomic mapping with USER0 type. Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 18476bf0b580..463e8d0155c2 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -272,7 +272,7 @@ static void i915_dump_pages(struct seq_file *m, struct page **pages, int page_co mem = kmap_atomic(pages[page], KM_USER0); for (i = 0; i < PAGE_SIZE; i += 4) seq_printf(m, "%08x : %08x\n", i, mem[i / 4]); - kunmap_atomic(pages[page], KM_USER0); + kunmap_atomic(mem, KM_USER0); } } From 96b47b65594fe2365f73aede060cb5203561fed3 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 15 Dec 2009 17:50:00 +0100 Subject: [PATCH 0014/1626] drm/i915: fix order of fence release wrt flushing i915_gem_object_unbind had the ordering wrong. The other user, i915_gem_object_put_fence_reg already has the correct ordering. Results was usually corrupted pixmaps, especially garbled font glyphs after a suspend/resume (because this evicts everything). I'm still waiting for the feedback from the bug-reporters, but because this obviously fixes a bug (at least for me) I'm already submitting it. Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=25406 Signed-off-by: Daniel Vetter Signed-off-by: Eric Anholt CC: stable@kernel.org --- drivers/gpu/drm/i915/i915_gem.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 8c463cf2050a..9e81a0ddafac 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2021,9 +2021,6 @@ i915_gem_object_unbind(struct drm_gem_object *obj) /* blow away mappings if mapped through GTT */ i915_gem_release_mmap(obj); - if (obj_priv->fence_reg != I915_FENCE_REG_NONE) - i915_gem_clear_fence_reg(obj); - /* Move the object to the CPU domain to ensure that * any possible CPU writes while it's not in the GTT * are flushed when we go to remap it. This will @@ -2039,6 +2036,10 @@ i915_gem_object_unbind(struct drm_gem_object *obj) BUG_ON(obj_priv->active); + /* release the fence reg _after_ flushing */ + if (obj_priv->fence_reg != I915_FENCE_REG_NONE) + i915_gem_clear_fence_reg(obj); + if (obj_priv->agp_mem != NULL) { drm_unbind_agp(obj_priv->agp_mem); drm_free_agp(obj_priv->agp_mem, obj->size / PAGE_SIZE); From 11ba159288f1bfc1a475c994e598f5fe423fde9d Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 15 Dec 2009 13:55:24 -0500 Subject: [PATCH 0015/1626] drm/i915: Don't check for lid presence when detecting LVDS Checking for the presence of a lid in order to validate whether or not an LVDS display exists fails on some development platforms that implement a lid device but allow the LVDS to be disabled. The VBT is correctly updated, but Linux assumes that an LVDS is still present and lies to userspace. Remove the lid check and trust the VBT. Signed-off-by: Matthew Garrett Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_lvds.c | 67 +------------------------------ 1 file changed, 2 insertions(+), 65 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 3118ce274e67..539d97ee79e6 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -854,65 +854,6 @@ static const struct dmi_system_id intel_no_lvds[] = { { } /* terminating entry */ }; -#ifdef CONFIG_ACPI -/* - * check_lid_device -- check whether @handle is an ACPI LID device. - * @handle: ACPI device handle - * @level : depth in the ACPI namespace tree - * @context: the number of LID device when we find the device - * @rv: a return value to fill if desired (Not use) - */ -static acpi_status -check_lid_device(acpi_handle handle, u32 level, void *context, - void **return_value) -{ - struct acpi_device *acpi_dev; - int *lid_present = context; - - acpi_dev = NULL; - /* Get the acpi device for device handle */ - if (acpi_bus_get_device(handle, &acpi_dev) || !acpi_dev) { - /* If there is no ACPI device for handle, return */ - return AE_OK; - } - - if (!strncmp(acpi_device_hid(acpi_dev), "PNP0C0D", 7)) - *lid_present = 1; - - return AE_OK; -} - -/** - * check whether there exists the ACPI LID device by enumerating the ACPI - * device tree. - */ -static int intel_lid_present(void) -{ - int lid_present = 0; - - if (acpi_disabled) { - /* If ACPI is disabled, there is no ACPI device tree to - * check, so assume the LID device would have been present. - */ - return 1; - } - - acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, - check_lid_device, NULL, &lid_present, NULL); - - return lid_present; -} -#else -static int intel_lid_present(void) -{ - /* In the absence of ACPI built in, assume that the LID device would - * have been present. - */ - return 1; -} -#endif - /** * intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID * @dev: drm device @@ -1031,12 +972,8 @@ void intel_lvds_init(struct drm_device *dev) if (dmi_check_system(intel_no_lvds)) return; - /* - * Assume LVDS is present if there's an ACPI lid device or if the - * device is present in the VBT. - */ - if (!lvds_is_present_in_vbt(dev) && !intel_lid_present()) { - DRM_DEBUG_KMS("LVDS is not present in VBT and no lid detected\n"); + if (!lvds_is_present_in_vbt(dev)) { + DRM_DEBUG_KMS("LVDS is not present in VBT\n"); return; } From cbda12d77ea590082edb6d30bd342a67ebc459e0 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Wed, 16 Dec 2009 13:36:10 +0800 Subject: [PATCH 0016/1626] drm/i915: implement new pm ops for i915 One problem in i915 hibernate with current legacy pci pm ops is that after we do freeze, we'll be forced to do resume once again, which re-init some resources and do modesetting again, that is unnecessary for hibernate. This patch trys to bypass that. We can't resolve this within legacy pm framework, but can do it easily with new pm ops. Suspend (S3) process has also been kept without change. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.c | 53 +++++++++++++++++++++++++++++---- 1 file changed, 47 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 2fa217862058..6978a22f70e7 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -284,6 +284,52 @@ i915_pci_resume(struct pci_dev *pdev) return i915_resume(dev); } +static int +i915_pm_suspend(struct device *dev) +{ + return i915_pci_suspend(to_pci_dev(dev), PMSG_SUSPEND); +} + +static int +i915_pm_resume(struct device *dev) +{ + return i915_pci_resume(to_pci_dev(dev)); +} + +static int +i915_pm_freeze(struct device *dev) +{ + return i915_pci_suspend(to_pci_dev(dev), PMSG_FREEZE); +} + +static int +i915_pm_thaw(struct device *dev) +{ + /* thaw during hibernate, do nothing! */ + return 0; +} + +static int +i915_pm_poweroff(struct device *dev) +{ + return i915_pci_suspend(to_pci_dev(dev), PMSG_HIBERNATE); +} + +static int +i915_pm_restore(struct device *dev) +{ + return i915_pci_resume(to_pci_dev(dev)); +} + +const struct dev_pm_ops i915_pm_ops = { + .suspend = i915_pm_suspend, + .resume = i915_pm_resume, + .freeze = i915_pm_freeze, + .thaw = i915_pm_thaw, + .poweroff = i915_pm_poweroff, + .restore = i915_pm_restore, +}; + static struct vm_operations_struct i915_gem_vm_ops = { .fault = i915_gem_fault, .open = drm_gem_vm_open, @@ -303,8 +349,6 @@ static struct drm_driver driver = { .lastclose = i915_driver_lastclose, .preclose = i915_driver_preclose, .postclose = i915_driver_postclose, - .suspend = i915_suspend, - .resume = i915_resume, .device_is_agp = i915_driver_device_is_agp, .enable_vblank = i915_enable_vblank, .disable_vblank = i915_disable_vblank, @@ -344,10 +388,7 @@ static struct drm_driver driver = { .id_table = pciidlist, .probe = i915_pci_probe, .remove = i915_pci_remove, -#ifdef CONFIG_PM - .resume = i915_pci_resume, - .suspend = i915_pci_suspend, -#endif + .driver.pm = &i915_pm_ops, }, .name = DRIVER_NAME, From 53281b6d34d44308372d16acb7fb5327609f68b6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 16 Dec 2009 08:23:37 -0800 Subject: [PATCH 0017/1626] fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro Tested-by: Tavis Ormandy Cc: Jeff Dike Cc: Matt Mackall Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/fcntl.c | 110 ++++++++++++++++++++++++++++++++++------------------- 1 file changed, 70 insertions(+), 40 deletions(-) diff --git a/fs/fcntl.c b/fs/fcntl.c index 2cf93ec40a67..97e01dc0d95f 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -618,60 +618,90 @@ static DEFINE_RWLOCK(fasync_lock); static struct kmem_cache *fasync_cache __read_mostly; /* - * fasync_helper() is used by almost all character device drivers - * to set up the fasync queue. It returns negative on error, 0 if it did - * no changes and positive if it added/deleted the entry. + * Remove a fasync entry. If successfully removed, return + * positive and clear the FASYNC flag. If no entry exists, + * do nothing and return 0. + * + * NOTE! It is very important that the FASYNC flag always + * match the state "is the filp on a fasync list". + * + * We always take the 'filp->f_lock', in since fasync_lock + * needs to be irq-safe. */ -int fasync_helper(int fd, struct file * filp, int on, struct fasync_struct **fapp) +static int fasync_remove_entry(struct file *filp, struct fasync_struct **fapp) { struct fasync_struct *fa, **fp; - struct fasync_struct *new = NULL; int result = 0; - if (on) { - new = kmem_cache_alloc(fasync_cache, GFP_KERNEL); - if (!new) - return -ENOMEM; - } - - /* - * We need to take f_lock first since it's not an IRQ-safe - * lock. - */ spin_lock(&filp->f_lock); write_lock_irq(&fasync_lock); for (fp = fapp; (fa = *fp) != NULL; fp = &fa->fa_next) { - if (fa->fa_file == filp) { - if(on) { - fa->fa_fd = fd; - kmem_cache_free(fasync_cache, new); - } else { - *fp = fa->fa_next; - kmem_cache_free(fasync_cache, fa); - result = 1; - } - goto out; - } - } - - if (on) { - new->magic = FASYNC_MAGIC; - new->fa_file = filp; - new->fa_fd = fd; - new->fa_next = *fapp; - *fapp = new; - result = 1; - } -out: - if (on) - filp->f_flags |= FASYNC; - else + if (fa->fa_file != filp) + continue; + *fp = fa->fa_next; + kmem_cache_free(fasync_cache, fa); filp->f_flags &= ~FASYNC; + result = 1; + break; + } write_unlock_irq(&fasync_lock); spin_unlock(&filp->f_lock); return result; } +/* + * Add a fasync entry. Return negative on error, positive if + * added, and zero if did nothing but change an existing one. + * + * NOTE! It is very important that the FASYNC flag always + * match the state "is the filp on a fasync list". + */ +static int fasync_add_entry(int fd, struct file *filp, struct fasync_struct **fapp) +{ + struct fasync_struct *new, *fa, **fp; + int result = 0; + + new = kmem_cache_alloc(fasync_cache, GFP_KERNEL); + if (!new) + return -ENOMEM; + + spin_lock(&filp->f_lock); + write_lock_irq(&fasync_lock); + for (fp = fapp; (fa = *fp) != NULL; fp = &fa->fa_next) { + if (fa->fa_file != filp) + continue; + fa->fa_fd = fd; + kmem_cache_free(fasync_cache, new); + goto out; + } + + new->magic = FASYNC_MAGIC; + new->fa_file = filp; + new->fa_fd = fd; + new->fa_next = *fapp; + *fapp = new; + result = 1; + filp->f_flags |= FASYNC; + +out: + write_unlock_irq(&fasync_lock); + spin_unlock(&filp->f_lock); + return result; +} + +/* + * fasync_helper() is used by almost all character device drivers + * to set up the fasync queue, and for regular files by the file + * lease code. It returns negative on error, 0 if it did no changes + * and positive if it added/deleted the entry. + */ +int fasync_helper(int fd, struct file * filp, int on, struct fasync_struct **fapp) +{ + if (!on) + return fasync_remove_entry(filp, fapp); + return fasync_add_entry(fd, filp, fapp); +} + EXPORT_SYMBOL(fasync_helper); void __kill_fasync(struct fasync_struct *fa, int sig, int band) From 4297a462f455e38f08976df7b16c849614a287da Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 16 Dec 2009 16:28:03 +0100 Subject: [PATCH 0018/1626] dma: at_hdmac: correct incompatible type for argument 1 of 'spin_lock_bh' Correct a typo error in locking calls. Cc: Signed-off-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/at_hdmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 7585c4164bd5..c558fa13b4b7 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -815,7 +815,7 @@ atc_is_tx_complete(struct dma_chan *chan, dev_vdbg(chan2dev(chan), "is_tx_complete: %d (d%d, u%d)\n", cookie, done ? *done : 0, used ? *used : 0); - spin_lock_bh(atchan->lock); + spin_lock_bh(&atchan->lock); last_complete = atchan->completed_cookie; last_used = chan->cookie; @@ -830,7 +830,7 @@ atc_is_tx_complete(struct dma_chan *chan, ret = dma_async_is_complete(cookie, last_complete, last_used); } - spin_unlock_bh(atchan->lock); + spin_unlock_bh(&atchan->lock); if (done) *done = last_complete; From 15293df82bd1c15196e7cb336130c243e9a41806 Mon Sep 17 00:00:00 2001 From: Detlef Riekenberg Date: Thu, 10 Dec 2009 13:55:48 +0100 Subject: [PATCH 0019/1626] vgaarbiter: fix a typo in the vgaarbiter Documentation I detected a typo, while reading "Documentation/vgaarbiter.txt". Fix the 'fieldd' mispelling. Signed-off-by: Detlef Riekenberg Signed-off-by: Jesse Barnes --- Documentation/vgaarbiter.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/vgaarbiter.txt b/Documentation/vgaarbiter.txt index 987f9b0a5ece..43a9b0694fdd 100644 --- a/Documentation/vgaarbiter.txt +++ b/Documentation/vgaarbiter.txt @@ -103,7 +103,7 @@ I.2 libpciaccess ---------------- To use the vga arbiter char device it was implemented an API inside the -libpciaccess library. One fieldd was added to struct pci_device (each device +libpciaccess library. One field was added to struct pci_device (each device on the system): /* the type of resource decoded by the device */ From a3cb5195f6db58dbebd8a31b877ddce082c9b63d Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Fri, 11 Dec 2009 09:26:10 +0800 Subject: [PATCH 0020/1626] drm/i915: Add MALATA PC-81005 to ACPI LID quirk list The MALATA PC-81005 laptop always reports that the LID status is closed and we can't use it reliabily for LVDS detection. So add this box into the quirk list. https://bugs.freedesktop.org/show_bug.cgi?id=25523 Signed-off-by: Zhao Yakui Review-by: Jesse Barnes Tested-by: Hector Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_lvds.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 539d97ee79e6..b3188a0b4979 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -608,6 +608,13 @@ static const struct dmi_system_id bad_lid_status[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire one"), }, }, + { + .ident = "PC-81005", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MALATA"), + DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"), + }, + }, { } }; From a2565377a5c31e25c77c7cabaf6752abe9a2d83a Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Fri, 11 Dec 2009 09:26:11 +0800 Subject: [PATCH 0021/1626] drm/i915: Update LVDS connector status when receiving ACPI LID event Dirk reports that nothing is displayed on LVDS when using ubuntu 9.1 after close/reopen the LID. And I also reproduce this issue on another laptop. After some tests and debug, it seems that it is related with that the LVDS status is not updated in time in course of suspend/resume. Now the LID state is used to check whether the LVDS is connected or disconnected. And when the LID is closed, it means that the LVDS is disconnected. When it is reopened, it means that the LVDS is connected. At the same time on some distributions the LID event is also used to put the system into suspend state. When the LID is closed, the system will enter the suspend state. When the LID is reopened, the system will be resumed. In such case when the LID is closed, user-space script will receive the LID notification event and detect the LVDS as disconnected. Then the system will enter the suspended state. When the LID is reopened, the system will be resumed. As the LVDS status is not updated in course of resume, it will cause that the LVDS connector is marked as unused and disabled. After the resume is finished,user-space script will try to configure the display mode for LVDS. But unfortunately as the LVDS status is not updated in time and it is still marked as disconnected, the LVDS and its corresponding CRTC will be disabled again in the function of drm_helper_disable_unused_functions after changing mode for LVDS. So we had better check and update the status of LVDS connector after receiving the LID notication event. Then after the system is resumed from suspended state, we can set the display mode for LVDS correctly. Signed-off-by: Zhao Yakui Reported-by: Dirk Hohndel Reviewed-by: Jesse Barnes CC: stable@kernel.org Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_lvds.c | 9 +++++++++ 2 files changed, 10 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index fbecac72f5bb..25c1047f6ecd 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -561,6 +561,7 @@ typedef struct drm_i915_private { u16 orig_clock; int child_dev_num; struct child_device_config *child_dev; + struct drm_connector *int_lvds_connector; } drm_i915_private_t; /** driver private structure attached to each drm_gem_object */ diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index b3188a0b4979..f4b4aa242df1 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -686,7 +686,14 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val, struct drm_i915_private *dev_priv = container_of(nb, struct drm_i915_private, lid_notifier); struct drm_device *dev = dev_priv->dev; + struct drm_connector *connector = dev_priv->int_lvds_connector; + /* + * check and update the status of LVDS connector after receiving + * the LID nofication event. + */ + if (connector) + connector->status = connector->funcs->detect(connector); if (!acpi_lid_open()) { dev_priv->modeset_on_lid = 1; return NOTIFY_OK; @@ -1124,6 +1131,8 @@ out: DRM_DEBUG_KMS("lid notifier registration failed\n"); dev_priv->lid_notifier.notifier_call = NULL; } + /* keep the LVDS connector */ + dev_priv->int_lvds_connector = connector; drm_sysfs_connector_add(connector); return; From dc1a94ae1749d14c55f8b54e9d92bd89df82d51a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 29 Nov 2009 16:35:54 +0100 Subject: [PATCH 0022/1626] PCI/PM: Propagate wake-up enable for PCIe devices too Having read the PM part of the PCIe 2.0 specification more carefully I think that it was a mistake to restrict the wake-up enable propagation to non-PCIe devices, because if we do not request control of the root ports' PME registers via OSC, PCIe PME is supposed to be handled by the platform, just like the non-PCIe PME. Even if we do that, the wake-up propagation is done to allow the devices to wake up the system from sleep states which involves the platform anyway, so it won't hurt. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci-acpi.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index cc617ddd33d0..7e2829538a4c 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -112,11 +112,7 @@ static bool acpi_pci_can_wakeup(struct pci_dev *dev) static void acpi_pci_propagate_wakeup_enable(struct pci_bus *bus, bool enable) { while (bus->parent) { - struct pci_dev *bridge = bus->self; - int ret; - - ret = acpi_pm_device_sleep_wake(&bridge->dev, enable); - if (!ret || pci_is_pcie(bridge)) + if (!acpi_pm_device_sleep_wake(&bus->self->dev, enable)) return; bus = bus->parent; } @@ -131,9 +127,7 @@ static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable) if (acpi_pci_can_wakeup(dev)) return acpi_pm_device_sleep_wake(&dev->dev, enable); - if (!pci_is_pcie(dev)) - acpi_pci_propagate_wakeup_enable(dev->bus, enable); - + acpi_pci_propagate_wakeup_enable(dev->bus, enable); return 0; } From 2820f333e3b4ad96590093efbed7b3400bcf492b Mon Sep 17 00:00:00 2001 From: Csaba Henk Date: Tue, 15 Dec 2009 17:55:25 +0530 Subject: [PATCH 0023/1626] PCI: Handle case when no pci device can provide cache line size hint Prior to this patch, if pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, ...) returns 0 for all dev, pci_cache_line_size ends up set to zero (instead of pci_dfl_cache_line_size). This patch ensures the pci_cache_line_size = pci_dfl_cache_line_size setting in the above scenario. This happens in case of a kvm-88 guest (where, consequently, the rtl8139 NIC failed to initialize). Acked-by: Tejun Heo Signed-off-by: Csaba Henk Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 7cfa7c38d318..f70f4e23225c 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2629,7 +2629,7 @@ static int __init pci_apply_final_quirks(void) if (!pci_cache_line_size) { printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n", cls << 2, pci_dfl_cache_line_size << 2); - pci_cache_line_size = cls; + pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size; } return 0; From b9c3b266411d27f1a6466c19d146d08db576bfea Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Mon, 7 Dec 2009 13:03:21 +0800 Subject: [PATCH 0024/1626] PCI: support device-specific reset methods Add a new type of quirk for resetting devices at pci_dev_reset time. This is necessary to handle device with nonstandard reset procedures, especially useful for guest drivers. Signed-off-by: Yu Zhao Signed-off-by: Dexuan Cui Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 19 +++++++++++++++++++ drivers/pci/pci.h | 8 ++++++++ drivers/pci/quirks.c | 9 +++++++++ 3 files changed, 36 insertions(+) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 0bc27e059019..6011d064e89d 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2284,6 +2284,21 @@ static int pci_parent_bus_reset(struct pci_dev *dev, int probe) return 0; } +static int pci_dev_specific_reset(struct pci_dev *dev, int probe) +{ + struct pci_dev_reset_methods *i; + + for (i = pci_dev_reset_methods; i->reset; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) + return i->reset(dev, probe); + } + + return -ENOTTY; +} + static int pci_dev_reset(struct pci_dev *dev, int probe) { int rc; @@ -2296,6 +2311,10 @@ static int pci_dev_reset(struct pci_dev *dev, int probe) down(&dev->dev.sem); } + rc = pci_dev_specific_reset(dev, probe); + if (rc != -ENOTTY) + goto done; + rc = pcie_flr(dev, probe); if (rc != -ENOTTY) goto done; diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 33ed8e0aba1e..709eaa4fee51 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -313,4 +313,12 @@ static inline int pci_resource_alignment(struct pci_dev *dev, extern void pci_enable_acs(struct pci_dev *dev); +struct pci_dev_reset_methods { + u16 vendor; + u16 device; + int (*reset)(struct pci_dev *dev, int probe); +}; + +extern struct pci_dev_reset_methods pci_dev_reset_methods[]; + #endif /* DRIVERS_PCI_H */ diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index f70f4e23225c..86c9177a6c6c 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2636,6 +2636,15 @@ static int __init pci_apply_final_quirks(void) } fs_initcall_sync(pci_apply_final_quirks); + +/* + * Followings are device-specific reset methods which can be used to + * reset a single function if other methods (e.g. FLR, PM D0->D3) are + * not available. + */ +struct pci_dev_reset_methods pci_dev_reset_methods[] = { + { 0 } +}; #else void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} #endif From aeb30016fec3378c543cae33654c2144277fe674 Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Mon, 7 Dec 2009 13:03:22 +0800 Subject: [PATCH 0025/1626] PCI: add Intel USB specific reset method Handle device specific reset requirements (i.e. vendor reg for reset along with appropriate timeout). Signed-off-by: Yu Zhao Signed-off-by: Dexuan Cui Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 86c9177a6c6c..cf96776d4bbf 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2642,7 +2642,31 @@ fs_initcall_sync(pci_apply_final_quirks); * reset a single function if other methods (e.g. FLR, PM D0->D3) are * not available. */ +static int reset_intel_generic_dev(struct pci_dev *dev, int probe) +{ + int pos; + + /* only implement PCI_CLASS_SERIAL_USB at present */ + if (dev->class == PCI_CLASS_SERIAL_USB) { + pos = pci_find_capability(dev, PCI_CAP_ID_VNDR); + if (!pos) + return -ENOTTY; + + if (probe) + return 0; + + pci_write_config_byte(dev, pos + 0x4, 1); + msleep(100); + + return 0; + } else { + return -ENOTTY; + } +} + struct pci_dev_reset_methods pci_dev_reset_methods[] = { + { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, + reset_intel_generic_dev }, { 0 } }; #else From c763e7b58f71833e6cb7b05493eb1adda4811b08 Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Mon, 7 Dec 2009 13:03:23 +0800 Subject: [PATCH 0026/1626] PCI: add Intel 82599 Virtual Function specific reset method Handle device specific timeout and use FLR. Signed-off-by: Yu Zhao Signed-off-by: Dexuan Cui Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index cf96776d4bbf..8726698866b1 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2664,7 +2664,29 @@ static int reset_intel_generic_dev(struct pci_dev *dev, int probe) } } +static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe) +{ + int pos; + + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (!pos) + return -ENOTTY; + + if (probe) + return 0; + + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, + PCI_EXP_DEVCTL_BCR_FLR); + msleep(100); + + return 0; +} + +#define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed + struct pci_dev_reset_methods pci_dev_reset_methods[] = { + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, + reset_intel_82599_sfp_virtfn }, { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, reset_intel_generic_dev }, { 0 } From 5714868812b563ba8816c1d974f4f07c76941c30 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 15 Dec 2009 10:19:50 +0900 Subject: [PATCH 0027/1626] PCI: fix section mismatch on update_res() Remark update_res from __init to __devinit as it is called also from __devinit functions. This patch removes the following warning message: WARNING: vmlinux.o(.devinit.text+0x774a): Section mismatch in reference from the function pci_root_bus_res() to the function .init.text:update_res() The function __devinit pci_root_bus_res() references a function __init update_res(). If update_res is only used by pci_root_bus_res then annotate update_res with a matching annotation. Signed-off-by: Jiri Slaby Cc: Aristeu Sergio Cc: Jesse Barnes Cc: linux-pci@vger.kernel.org Cc: x86@kernel.org Signed-off-by: Hidetoshi Seto Signed-off-by: Jesse Barnes --- arch/x86/pci/bus_numa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c index 145df00e0387..f939d603adfa 100644 --- a/arch/x86/pci/bus_numa.c +++ b/arch/x86/pci/bus_numa.c @@ -51,7 +51,7 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) } } -void __init update_res(struct pci_root_info *info, size_t start, +void __devinit update_res(struct pci_root_info *info, size_t start, size_t end, unsigned long flags, int merge) { int i; From 45e829ea412760d2404d7dfc42528df46aedbf62 Mon Sep 17 00:00:00 2001 From: Stefan Assmann Date: Thu, 3 Dec 2009 06:49:24 -0500 Subject: [PATCH 0028/1626] PCI: change PCI nomenclature in drivers/pci/ (comment changes) Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG terms listed in the "Trademark and Logo Usage Guidelines". http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf Patch is limited to drivers/pci/ and changes concern comments only. Signed-off-by: Stefan Assmann Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/shpchp.h | 2 +- drivers/pci/intel-iommu.c | 6 +++--- drivers/pci/intr_remapping.c | 2 +- drivers/pci/pci.c | 6 +++--- drivers/pci/pcie/aer/aer_inject.c | 4 ++-- drivers/pci/pcie/aer/aerdrv.c | 2 +- drivers/pci/pcie/aer/aerdrv_acpi.c | 2 +- drivers/pci/pcie/aer/aerdrv_core.c | 6 +++--- drivers/pci/pcie/aspm.c | 4 ++-- drivers/pci/search.c | 6 +++--- 10 files changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index bd588eb8e922..8e210cd76e55 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -121,7 +121,7 @@ struct controller { #define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450 #define PCI_DEVICE_ID_AMD_POGO_7458 0x7458 -/* AMD PCIX bridge registers */ +/* AMD PCI-X bridge registers */ #define PCIX_MEM_BASE_LIMIT_OFFSET 0x1C #define PCIX_MISCII_OFFSET 0x48 #define PCIX_MISC_BRIDGE_ERRORS_OFFSET 0x80 diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 8d6159426311..25e15d518bd9 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -304,7 +304,7 @@ struct device_domain_info { int segment; /* PCI domain */ u8 bus; /* PCI bus number */ u8 devfn; /* PCI devfn number */ - struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */ + struct pci_dev *dev; /* it's NULL for PCIe-to-PCI bridge */ struct intel_iommu *iommu; /* IOMMU used by this device */ struct dmar_domain *domain; /* pointer to domain */ }; @@ -1611,7 +1611,7 @@ domain_context_mapping(struct dmar_domain *domain, struct pci_dev *pdev, return ret; parent = parent->bus->self; } - if (pci_is_pcie(tmp)) /* this is a PCIE-to-PCI bridge */ + if (pci_is_pcie(tmp)) /* this is a PCIe-to-PCI bridge */ return domain_context_mapping_one(domain, pci_domain_nr(tmp->subordinate), tmp->subordinate->number, 0, @@ -3319,7 +3319,7 @@ static void iommu_detach_dependent_devices(struct intel_iommu *iommu, parent->devfn); parent = parent->bus->self; } - if (pci_is_pcie(tmp)) /* this is a PCIE-to-PCI bridge */ + if (pci_is_pcie(tmp)) /* this is a PCIe-to-PCI bridge */ iommu_detach_dev(iommu, tmp->subordinate->number, 0); else /* this is a legacy PCI bridge */ diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index 1487bf2be863..c26caf180990 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -528,7 +528,7 @@ int set_msi_sid(struct irte *irte, struct pci_dev *dev) bridge = pci_find_upstream_pcie_bridge(dev); if (bridge) { - if (pci_is_pcie(bridge))/* this is a PCIE-to-PCI/PCIX bridge */ + if (pci_is_pcie(bridge))/* this is a PCIe-to-PCI/PCIX bridge */ set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16, (bridge->bus->number << 8) | dev->bus->number); else /* this is a legacy PCI bridge */ diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6011d064e89d..d50522bf16b1 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1153,11 +1153,11 @@ pci_disable_device(struct pci_dev *dev) /** * pcibios_set_pcie_reset_state - set reset state for device dev - * @dev: the PCI-E device reset + * @dev: the PCIe device reset * @state: Reset state to enter into * * - * Sets the PCI-E reset state for the device. This is the default + * Sets the PCIe reset state for the device. This is the default * implementation. Architecture implementations can override this. */ int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev, @@ -1168,7 +1168,7 @@ int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev, /** * pci_set_pcie_reset_state - set reset state for device dev - * @dev: the PCI-E device reset + * @dev: the PCIe device reset * @state: Reset state to enter into * * diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 7fcd5331b14c..0cae0f2b353a 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -1,7 +1,7 @@ /* - * PCIE AER software error injection support. + * PCIe AER software error injection support. * - * Debuging PCIE AER code is quite difficult because it is hard to + * Debuging PCIe AER code is quite difficult because it is hard to * trigger various real hardware errors. Software based error * injection can fake almost all kinds of errors with the help of a * user space helper tool aer-inject, which can be gotten from: diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index 97a345927b55..21f215f4daa3 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -155,7 +155,7 @@ static struct aer_rpc *aer_alloc_rpc(struct pcie_device *dev) mutex_init(&rpc->rpc_mutex); init_waitqueue_head(&rpc->wait_release); - /* Use PCIE bus function to store rpc into PCIE device */ + /* Use PCIe bus function to store rpc into PCIe device */ set_service_data(dev, rpc); return rpc; diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c index 8edb2f300e8f..04814087658d 100644 --- a/drivers/pci/pcie/aer/aerdrv_acpi.c +++ b/drivers/pci/pcie/aer/aerdrv_acpi.c @@ -24,7 +24,7 @@ * * @return: Zero on success. Nonzero otherwise. * - * Invoked when PCIE bus loads AER service driver. To avoid conflict with + * Invoked when PCIe bus loads AER service driver. To avoid conflict with * BIOS AER support requires BIOS to yield AER control to OS native driver. **/ int aer_osc_setup(struct pcie_device *pciedev) diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index ae672ca80333..c843a799814d 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -587,7 +587,7 @@ static void handle_error_source(struct pcie_device *aerdev, * aer_enable_rootport - enable Root Port's interrupts when receiving messages * @rpc: pointer to a Root Port data structure * - * Invoked when PCIE bus loads AER service driver. + * Invoked when PCIe bus loads AER service driver. */ void aer_enable_rootport(struct aer_rpc *rpc) { @@ -597,7 +597,7 @@ void aer_enable_rootport(struct aer_rpc *rpc) u32 reg32; pos = pci_pcie_cap(pdev); - /* Clear PCIE Capability's Device Status */ + /* Clear PCIe Capability's Device Status */ pci_read_config_word(pdev, pos+PCI_EXP_DEVSTA, ®16); pci_write_config_word(pdev, pos+PCI_EXP_DEVSTA, reg16); @@ -631,7 +631,7 @@ void aer_enable_rootport(struct aer_rpc *rpc) * disable_root_aer - disable Root Port's interrupts when receiving messages * @rpc: pointer to a Root Port data structure * - * Invoked when PCIE bus unloads AER service driver. + * Invoked when PCIe bus unloads AER service driver. */ static void disable_root_aer(struct aer_rpc *rpc) { diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 5a01fc7fbf05..be53d98fa384 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -1,6 +1,6 @@ /* * File: drivers/pci/pcie/aspm.c - * Enabling PCIE link L0s/L1 state and Clock Power Management + * Enabling PCIe link L0s/L1 state and Clock Power Management * * Copyright (C) 2007 Intel * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com) @@ -499,7 +499,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) int pos; u32 reg32; /* - * Some functions in a slot might not all be PCIE functions, + * Some functions in a slot might not all be PCIe functions, * very strange. Disable ASPM for the whole slot */ list_for_each_entry(child, &pdev->subordinate->devices, bus_list) { diff --git a/drivers/pci/search.c b/drivers/pci/search.c index 6dae87143258..4a471dc4f4b9 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -15,9 +15,9 @@ DECLARE_RWSEM(pci_bus_sem); /* - * find the upstream PCIE-to-PCI bridge of a PCI device + * find the upstream PCIe-to-PCI bridge of a PCI device * if the device is PCIE, return NULL - * if the device isn't connected to a PCIE bridge (that is its parent is a + * if the device isn't connected to a PCIe bridge (that is its parent is a * legacy PCI bridge and the bridge is directly connected to bus 0), return its * parent */ @@ -37,7 +37,7 @@ pci_find_upstream_pcie_bridge(struct pci_dev *pdev) tmp = pdev; continue; } - /* PCI device should connect to a PCIE bridge */ + /* PCI device should connect to a PCIe bridge */ if (pdev->pcie_type != PCI_EXP_TYPE_PCI_BRIDGE) { /* Busted hardware? */ WARN_ON_ONCE(1); From 7e8af37a9a71b479f58d2fd5f0ddaa6780c51f11 Mon Sep 17 00:00:00 2001 From: Stefan Assmann Date: Thu, 3 Dec 2009 18:00:10 +0100 Subject: [PATCH 0029/1626] PCI: change PCI nomenclature in drivers/pci/ (non-comment changes) Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG terms listed in the "Trademark and Logo Usage Guidelines". http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf Patch is limited to drivers/pci/ and changes concern non-comment parts or anything that might be visible to the user. Signed-off-by: Stefan Assmann Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aer/Kconfig.debug | 4 ++-- drivers/pci/pcie/aer/aer_inject.c | 2 +- drivers/pci/pcie/aer/aerdrv_errprint.c | 4 ++-- drivers/pci/pcie/portdrv_pci.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/pci/pcie/aer/Kconfig.debug b/drivers/pci/pcie/aer/Kconfig.debug index b8c925c1f6aa..9142949734f5 100644 --- a/drivers/pci/pcie/aer/Kconfig.debug +++ b/drivers/pci/pcie/aer/Kconfig.debug @@ -3,14 +3,14 @@ # config PCIEAER_INJECT - tristate "PCIE AER error injector support" + tristate "PCIe AER error injector support" depends on PCIEAER default n help This enables PCI Express Root Port Advanced Error Reporting (AER) software error injector. - Debuging PCIE AER code is quite difficult because it is hard + Debugging PCIe AER code is quite difficult because it is hard to trigger various real hardware errors. Software based error injection can fake almost all kinds of errors with the help of a user space helper tool aer-inject, which can be diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 0cae0f2b353a..797d47809f7a 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -484,5 +484,5 @@ static void __exit aer_inject_exit(void) module_init(aer_inject_init); module_exit(aer_inject_exit); -MODULE_DESCRIPTION("PCIE AER software error injector"); +MODULE_DESCRIPTION("PCIe AER software error injector"); MODULE_LICENSE("GPL"); diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c index 44acde72294f..9d3e4c8d0184 100644 --- a/drivers/pci/pcie/aer/aerdrv_errprint.c +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c @@ -184,7 +184,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) if (info->status == 0) { AER_PR(info, dev, - "PCIE Bus Error: severity=%s, type=Unaccessible, " + "PCIe Bus Error: severity=%s, type=Unaccessible, " "id=%04x(Unregistered Agent ID)\n", aer_error_severity_string[info->severity], id); } else { @@ -194,7 +194,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) agent = AER_GET_AGENT(info->severity, info->status); AER_PR(info, dev, - "PCIE Bus Error: severity=%s, type=%s, id=%04x(%s)\n", + "PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n", aer_error_severity_string[info->severity], aer_error_layer[layer], id, aer_agent_string[agent]); diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index a49452e2aed9..34d65172a4d7 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -24,7 +24,7 @@ */ #define DRIVER_VERSION "v1.0" #define DRIVER_AUTHOR "tom.l.nguyen@intel.com" -#define DRIVER_DESC "PCIE Port Bus Driver" +#define DRIVER_DESC "PCIe Port Bus Driver" MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); From 49ae35f2dd1ff78ee88d5f8a38d0af63c3ad9f71 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kristian=20H=C3=B8gsberg?= Date: Wed, 16 Dec 2009 15:16:15 -0500 Subject: [PATCH 0030/1626] drm/i915: Move PCI IDs into i915 driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The old include/drm/drm_pciids.h used to be generated from the libdrm git repo. We don't use that anymore so just use a local list in the driver like everybody else. Signed-off-by: Kristian Høgsberg Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.c | 42 +++++++++++++++++++++++++++++++-- 1 file changed, 40 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 6978a22f70e7..b6ec949361e2 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -33,7 +33,6 @@ #include "i915_drm.h" #include "i915_drv.h" -#include "drm_pciids.h" #include #include "drm_crtc_helper.h" @@ -48,8 +47,47 @@ module_param_named(powersave, i915_powersave, int, 0400); static struct drm_driver driver; +#define INTEL_VGA_DEVICE(id) { \ + .class = PCI_CLASS_DISPLAY_VGA << 8, \ + .class_mask = 0xffff00, \ + .vendor = 0x8086, \ + .device = id, \ + .subvendor = PCI_ANY_ID, \ + .subdevice = PCI_ANY_ID, \ + .driver_data = 0 } + static struct pci_device_id pciidlist[] = { - i915_PCI_IDS + INTEL_VGA_DEVICE(0x3577), + INTEL_VGA_DEVICE(0x2562), + INTEL_VGA_DEVICE(0x3582), + INTEL_VGA_DEVICE(0x2572), + INTEL_VGA_DEVICE(0x2582), + INTEL_VGA_DEVICE(0x258a), + INTEL_VGA_DEVICE(0x2592), + INTEL_VGA_DEVICE(0x2772), + INTEL_VGA_DEVICE(0x27a2), + INTEL_VGA_DEVICE(0x27ae), + INTEL_VGA_DEVICE(0x2972), + INTEL_VGA_DEVICE(0x2982), + INTEL_VGA_DEVICE(0x2992), + INTEL_VGA_DEVICE(0x29a2), + INTEL_VGA_DEVICE(0x29b2), + INTEL_VGA_DEVICE(0x29c2), + INTEL_VGA_DEVICE(0x29d2), + INTEL_VGA_DEVICE(0x2a02), + INTEL_VGA_DEVICE(0x2a12), + INTEL_VGA_DEVICE(0x2a42), + INTEL_VGA_DEVICE(0x2e02), + INTEL_VGA_DEVICE(0x2e12), + INTEL_VGA_DEVICE(0x2e22), + INTEL_VGA_DEVICE(0x2e32), + INTEL_VGA_DEVICE(0x2e42), + INTEL_VGA_DEVICE(0xa001), + INTEL_VGA_DEVICE(0xa011), + INTEL_VGA_DEVICE(0x35e8), + INTEL_VGA_DEVICE(0x0042), + INTEL_VGA_DEVICE(0x0046), + {0, 0, 0} }; #if defined(CONFIG_DRM_I915_KMS) From cfdf1fa23f4074c9f8766dc67a928bbf680b1ac9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kristian=20H=C3=B8gsberg?= Date: Wed, 16 Dec 2009 15:16:16 -0500 Subject: [PATCH 0031/1626] drm/i915: Implement IS_* macros using static tables MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Instead of using the IS_I9XX etc macros that expand to a ton of comparisons, use new struct intel_device_info to capture the capabilities of the different chipsets. The drm_i915_private struct will be initialized to point to the device info that correspond to the actual device and this way, testing for a specific capability is just a matter of checking a bit field. Signed-off-by: Kristian Høgsberg Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 4 +- drivers/gpu/drm/i915/i915_drv.c | 142 ++++++++++++++++++++++++-------- drivers/gpu/drm/i915/i915_drv.h | 110 +++++++++++-------------- 3 files changed, 159 insertions(+), 97 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 701bfeac7f57..549e46c1a979 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1360,7 +1360,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) { struct drm_i915_private *dev_priv = dev->dev_private; resource_size_t base, size; - int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1; + int ret = 0, mmio_bar; uint32_t agp_size, prealloc_size, prealloc_start; /* i915 has 4 more counters */ @@ -1376,8 +1376,10 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev->dev_private = (void *)dev_priv; dev_priv->dev = dev; + dev_priv->info = (struct intel_device_info *) flags; /* Add register map (needed for suspend/resume) */ + mmio_bar = IS_I9XX(dev) ? 0 : 1; base = drm_get_resource_start(dev, mmio_bar); size = drm_get_resource_len(dev, mmio_bar); diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index b6ec949361e2..1b256de24563 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -47,46 +47,122 @@ module_param_named(powersave, i915_powersave, int, 0400); static struct drm_driver driver; -#define INTEL_VGA_DEVICE(id) { \ +#define INTEL_VGA_DEVICE(id, info) { \ .class = PCI_CLASS_DISPLAY_VGA << 8, \ .class_mask = 0xffff00, \ .vendor = 0x8086, \ .device = id, \ .subvendor = PCI_ANY_ID, \ .subdevice = PCI_ANY_ID, \ - .driver_data = 0 } + .driver_data = (unsigned long) info } -static struct pci_device_id pciidlist[] = { - INTEL_VGA_DEVICE(0x3577), - INTEL_VGA_DEVICE(0x2562), - INTEL_VGA_DEVICE(0x3582), - INTEL_VGA_DEVICE(0x2572), - INTEL_VGA_DEVICE(0x2582), - INTEL_VGA_DEVICE(0x258a), - INTEL_VGA_DEVICE(0x2592), - INTEL_VGA_DEVICE(0x2772), - INTEL_VGA_DEVICE(0x27a2), - INTEL_VGA_DEVICE(0x27ae), - INTEL_VGA_DEVICE(0x2972), - INTEL_VGA_DEVICE(0x2982), - INTEL_VGA_DEVICE(0x2992), - INTEL_VGA_DEVICE(0x29a2), - INTEL_VGA_DEVICE(0x29b2), - INTEL_VGA_DEVICE(0x29c2), - INTEL_VGA_DEVICE(0x29d2), - INTEL_VGA_DEVICE(0x2a02), - INTEL_VGA_DEVICE(0x2a12), - INTEL_VGA_DEVICE(0x2a42), - INTEL_VGA_DEVICE(0x2e02), - INTEL_VGA_DEVICE(0x2e12), - INTEL_VGA_DEVICE(0x2e22), - INTEL_VGA_DEVICE(0x2e32), - INTEL_VGA_DEVICE(0x2e42), - INTEL_VGA_DEVICE(0xa001), - INTEL_VGA_DEVICE(0xa011), - INTEL_VGA_DEVICE(0x35e8), - INTEL_VGA_DEVICE(0x0042), - INTEL_VGA_DEVICE(0x0046), +const static struct intel_device_info intel_i830_info = { + .is_i8xx = 1, .is_mobile = 1, +}; + +const static struct intel_device_info intel_845g_info = { + .is_i8xx = 1, +}; + +const static struct intel_device_info intel_i85x_info = { + .is_i8xx = 1, .is_mobile = 1, +}; + +const static struct intel_device_info intel_i865g_info = { + .is_i8xx = 1, +}; + +const static struct intel_device_info intel_i915g_info = { + .is_i915g = 1, .is_i9xx = 1, +}; +const static struct intel_device_info intel_i915gm_info = { + .is_i9xx = 1, .is_mobile = 1, .has_fbc = 1, +}; +const static struct intel_device_info intel_i945g_info = { + .is_i9xx = 1, .has_hotplug = 1, +}; +const static struct intel_device_info intel_i945gm_info = { + .is_i945gm = 1, .is_i9xx = 1, .is_mobile = 1, .has_fbc = 1, + .has_hotplug = 1, +}; + +const static struct intel_device_info intel_i965g_info = { + .is_i965g = 1, .is_i9xx = 1, .has_hotplug = 1, +}; + +const static struct intel_device_info intel_i965gm_info = { + .is_i965g = 1, .is_mobile = 1, .is_i965gm = 1, .is_i9xx = 1, + .is_mobile = 1, .has_fbc = 1, .has_rc6 = 1, + .has_hotplug = 1, +}; + +const static struct intel_device_info intel_g33_info = { + .is_g33 = 1, .is_i9xx = 1, .need_gfx_hws = 1, + .has_hotplug = 1, +}; + +const static struct intel_device_info intel_g45_info = { + .is_i965g = 1, .is_g4x = 1, .is_i9xx = 1, .need_gfx_hws = 1, + .has_pipe_cxsr = 1, + .has_hotplug = 1, +}; + +const static struct intel_device_info intel_gm45_info = { + .is_i965g = 1, .is_mobile = 1, .is_g4x = 1, .is_i9xx = 1, + .is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1, .has_rc6 = 1, + .has_pipe_cxsr = 1, + .has_hotplug = 1, +}; + +const static struct intel_device_info intel_pineview_info = { + .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .is_i9xx = 1, + .has_pipe_cxsr = 1, + .has_hotplug = 1, +}; + +const static struct intel_device_info intel_ironlake_d_info = { + .is_ironlake = 1, .is_i965g = 1, .is_i9xx = 1, .need_gfx_hws = 1, + .has_pipe_cxsr = 1, + .has_hotplug = 1, +}; + +const static struct intel_device_info intel_ironlake_m_info = { + .is_ironlake = 1, .is_mobile = 1, .is_i965g = 1, .is_i9xx = 1, + .need_gfx_hws = 1, .has_rc6 = 1, + .has_hotplug = 1, +}; + +const static struct pci_device_id pciidlist[] = { + INTEL_VGA_DEVICE(0x3577, &intel_i830_info), + INTEL_VGA_DEVICE(0x2562, &intel_845g_info), + INTEL_VGA_DEVICE(0x3582, &intel_i85x_info), + INTEL_VGA_DEVICE(0x35e8, &intel_i85x_info), + INTEL_VGA_DEVICE(0x2572, &intel_i865g_info), + INTEL_VGA_DEVICE(0x2582, &intel_i915g_info), + INTEL_VGA_DEVICE(0x258a, &intel_i915g_info), + INTEL_VGA_DEVICE(0x2592, &intel_i915gm_info), + INTEL_VGA_DEVICE(0x2772, &intel_i945g_info), + INTEL_VGA_DEVICE(0x27a2, &intel_i945gm_info), + INTEL_VGA_DEVICE(0x27ae, &intel_i945gm_info), + INTEL_VGA_DEVICE(0x2972, &intel_i965g_info), + INTEL_VGA_DEVICE(0x2982, &intel_i965g_info), + INTEL_VGA_DEVICE(0x2992, &intel_i965g_info), + INTEL_VGA_DEVICE(0x29a2, &intel_i965g_info), + INTEL_VGA_DEVICE(0x29b2, &intel_g33_info), + INTEL_VGA_DEVICE(0x29c2, &intel_g33_info), + INTEL_VGA_DEVICE(0x29d2, &intel_g33_info), + INTEL_VGA_DEVICE(0x2a02, &intel_i965gm_info), + INTEL_VGA_DEVICE(0x2a12, &intel_i965gm_info), + INTEL_VGA_DEVICE(0x2a42, &intel_gm45_info), + INTEL_VGA_DEVICE(0x2e02, &intel_g45_info), + INTEL_VGA_DEVICE(0x2e12, &intel_g45_info), + INTEL_VGA_DEVICE(0x2e22, &intel_g45_info), + INTEL_VGA_DEVICE(0x2e32, &intel_g45_info), + INTEL_VGA_DEVICE(0x2e42, &intel_g45_info), + INTEL_VGA_DEVICE(0xa001, &intel_pineview_info), + INTEL_VGA_DEVICE(0xa011, &intel_pineview_info), + INTEL_VGA_DEVICE(0x0042, &intel_ironlake_d_info), + INTEL_VGA_DEVICE(0x0046, &intel_ironlake_m_info), {0, 0, 0} }; diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 25c1047f6ecd..0d24e034dc23 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -172,9 +172,30 @@ struct drm_i915_display_funcs { struct intel_overlay; +struct intel_device_info { + u8 is_mobile : 1; + u8 is_i8xx : 1; + u8 is_i915g : 1; + u8 is_i9xx : 1; + u8 is_i945gm : 1; + u8 is_i965g : 1; + u8 is_i965gm : 1; + u8 is_g33 : 1; + u8 need_gfx_hws : 1; + u8 is_g4x : 1; + u8 is_pineview : 1; + u8 is_ironlake : 1; + u8 has_fbc : 1; + u8 has_rc6 : 1; + u8 has_pipe_cxsr : 1; + u8 has_hotplug : 1; +}; + typedef struct drm_i915_private { struct drm_device *dev; + const struct intel_device_info *info; + int has_gem; void __iomem *regs; @@ -983,67 +1004,33 @@ extern void g4x_disable_fbc(struct drm_device *dev); extern int i915_wrap_ring(struct drm_device * dev); extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); -#define IS_I830(dev) ((dev)->pci_device == 0x3577) -#define IS_845G(dev) ((dev)->pci_device == 0x2562) -#define IS_I85X(dev) ((dev)->pci_device == 0x3582) -#define IS_I865G(dev) ((dev)->pci_device == 0x2572) -#define IS_I8XX(dev) (IS_I830(dev) || IS_845G(dev) || IS_I85X(dev) || IS_I865G(dev)) - -#define IS_I915G(dev) ((dev)->pci_device == 0x2582 || (dev)->pci_device == 0x258a) -#define IS_I915GM(dev) ((dev)->pci_device == 0x2592) -#define IS_I945G(dev) ((dev)->pci_device == 0x2772) -#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2 ||\ - (dev)->pci_device == 0x27AE) -#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \ - (dev)->pci_device == 0x2982 || \ - (dev)->pci_device == 0x2992 || \ - (dev)->pci_device == 0x29A2 || \ - (dev)->pci_device == 0x2A02 || \ - (dev)->pci_device == 0x2A12 || \ - (dev)->pci_device == 0x2A42 || \ - (dev)->pci_device == 0x2E02 || \ - (dev)->pci_device == 0x2E12 || \ - (dev)->pci_device == 0x2E22 || \ - (dev)->pci_device == 0x2E32 || \ - (dev)->pci_device == 0x2E42 || \ - (dev)->pci_device == 0x0042 || \ - (dev)->pci_device == 0x0046) - -#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \ - (dev)->pci_device == 0x2A12) - -#define IS_GM45(dev) ((dev)->pci_device == 0x2A42) - -#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \ - (dev)->pci_device == 0x2E12 || \ - (dev)->pci_device == 0x2E22 || \ - (dev)->pci_device == 0x2E32 || \ - (dev)->pci_device == 0x2E42 || \ - IS_GM45(dev)) - -#define IS_PINEVIEW_G(dev) ((dev)->pci_device == 0xa001) -#define IS_PINEVIEW_M(dev) ((dev)->pci_device == 0xa011) -#define IS_PINEVIEW(dev) (IS_PINEVIEW_G(dev) || IS_PINEVIEW_M(dev)) - -#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \ - (dev)->pci_device == 0x29B2 || \ - (dev)->pci_device == 0x29D2 || \ - (IS_PINEVIEW(dev))) +#define INTEL_INFO(dev) (((struct drm_i915_private *) (dev)->dev_private)->info) +#define IS_I830(dev) ((dev)->pci_device == 0x3577) +#define IS_845G(dev) ((dev)->pci_device == 0x2562) +#define IS_I85X(dev) ((dev)->pci_device == 0x3582) +#define IS_I865G(dev) ((dev)->pci_device == 0x2572) +#define IS_I8XX(dev) (INTEL_INFO(dev)->is_i8xx) +#define IS_I915G(dev) (INTEL_INFO(dev)->is_i915g) +#define IS_I915GM(dev) ((dev)->pci_device == 0x2592) +#define IS_I945G(dev) ((dev)->pci_device == 0x2772) +#define IS_I945GM(dev) (INTEL_INFO(dev)->is_i945gm) +#define IS_I965G(dev) (INTEL_INFO(dev)->is_i965g) +#define IS_I965GM(dev) (INTEL_INFO(dev)->is_i965gm) +#define IS_GM45(dev) ((dev)->pci_device == 0x2A42) +#define IS_G4X(dev) (INTEL_INFO(dev)->is_g4x) +#define IS_PINEVIEW_G(dev) ((dev)->pci_device == 0xa001) +#define IS_PINEVIEW_M(dev) ((dev)->pci_device == 0xa011) +#define IS_PINEVIEW(dev) (INTEL_INFO(dev)->is_pineview) +#define IS_G33(dev) (INTEL_INFO(dev)->is_g33) #define IS_IRONLAKE_D(dev) ((dev)->pci_device == 0x0042) #define IS_IRONLAKE_M(dev) ((dev)->pci_device == 0x0046) -#define IS_IRONLAKE(dev) (IS_IRONLAKE_D(dev) || IS_IRONLAKE_M(dev)) +#define IS_IRONLAKE(dev) (INTEL_INFO(dev)->is_ironlake) +#define IS_I9XX(dev) (INTEL_INFO(dev)->is_i9xx) +#define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile) -#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \ - IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev) || \ - IS_IRONLAKE(dev)) +#define I915_NEED_GFX_HWS(dev) (INTEL_INFO(dev)->need_gfx_hws) -#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \ - IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev) || \ - IS_PINEVIEW(dev) || IS_IRONLAKE_M(dev)) - -#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev) || \ - IS_IRONLAKE(dev)) /* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte * rows, which changed the alignment requirements and fence programming. */ @@ -1055,17 +1042,14 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define SUPPORTS_EDP(dev) (IS_IRONLAKE_M(dev)) #define SUPPORTS_TV(dev) (IS_I9XX(dev) && IS_MOBILE(dev) && \ !IS_IRONLAKE(dev) && !IS_PINEVIEW(dev)) -#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev) || IS_I965G(dev)) +#define I915_HAS_HOTPLUG(dev) (INTEL_INFO(dev)->has_hotplug) /* dsparb controlled by hw only */ #define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IRONLAKE(dev)) #define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IRONLAKE(dev)) -#define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IRONLAKE(dev)) -#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && \ - (IS_I9XX(dev) || IS_GM45(dev)) && \ - !IS_PINEVIEW(dev) && \ - !IS_IRONLAKE(dev)) -#define I915_HAS_RC6(dev) (IS_I965GM(dev) || IS_GM45(dev) || IS_IRONLAKE_M(dev)) +#define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr) +#define I915_HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc) +#define I915_HAS_RC6(dev) (INTEL_INFO(dev)->has_rc6) #define PRIMARY_RINGBUFFER_SIZE (128*1024) From b295d1b6e3e3f240d27cbe556d33ff5eb54721a7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kristian=20H=C3=B8gsberg?= Date: Wed, 16 Dec 2009 15:16:17 -0500 Subject: [PATCH 0032/1626] drm/i915: Track whether cursor needs physical address in intel_device_info MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Kristian Høgsberg Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 8 -------- drivers/gpu/drm/i915/i915_drv.c | 11 ++++++----- drivers/gpu/drm/i915/i915_drv.h | 3 +-- drivers/gpu/drm/i915/intel_display.c | 4 ++-- 4 files changed, 9 insertions(+), 17 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 549e46c1a979..28d99b8a0490 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1200,14 +1200,6 @@ static int i915_load_modeset_init(struct drm_device *dev, dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) & 0xff000000; - if (IS_MOBILE(dev) || IS_I9XX(dev)) - dev_priv->cursor_needs_physical = true; - else - dev_priv->cursor_needs_physical = false; - - if (IS_I965G(dev) || IS_G33(dev)) - dev_priv->cursor_needs_physical = false; - /* Basic memrange allocator for stolen space (aka vram) */ drm_mm_init(&dev_priv->vram, 0, prealloc_size); DRM_INFO("set up %ldM of stolen space\n", prealloc_size / (1024*1024)); diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 1b256de24563..a0a2cad8c016 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -57,7 +57,7 @@ static struct drm_driver driver; .driver_data = (unsigned long) info } const static struct intel_device_info intel_i830_info = { - .is_i8xx = 1, .is_mobile = 1, + .is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1, }; const static struct intel_device_info intel_845g_info = { @@ -65,7 +65,7 @@ const static struct intel_device_info intel_845g_info = { }; const static struct intel_device_info intel_i85x_info = { - .is_i8xx = 1, .is_mobile = 1, + .is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1, }; const static struct intel_device_info intel_i865g_info = { @@ -73,17 +73,18 @@ const static struct intel_device_info intel_i865g_info = { }; const static struct intel_device_info intel_i915g_info = { - .is_i915g = 1, .is_i9xx = 1, + .is_i915g = 1, .is_i9xx = 1, .cursor_needs_physical = 1, }; const static struct intel_device_info intel_i915gm_info = { .is_i9xx = 1, .is_mobile = 1, .has_fbc = 1, + .cursor_needs_physical = 1, }; const static struct intel_device_info intel_i945g_info = { - .is_i9xx = 1, .has_hotplug = 1, + .is_i9xx = 1, .has_hotplug = 1, .cursor_needs_physical = 1, }; const static struct intel_device_info intel_i945gm_info = { .is_i945gm = 1, .is_i9xx = 1, .is_mobile = 1, .has_fbc = 1, - .has_hotplug = 1, + .has_hotplug = 1, .cursor_needs_physical = 1, }; const static struct intel_device_info intel_i965g_info = { diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 0d24e034dc23..9a05f1a01025 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -189,6 +189,7 @@ struct intel_device_info { u8 has_rc6 : 1; u8 has_pipe_cxsr : 1; u8 has_hotplug : 1; + u8 cursor_needs_physical : 1; }; typedef struct drm_i915_private { @@ -253,8 +254,6 @@ typedef struct drm_i915_private { int hangcheck_count; uint32_t last_acthd; - bool cursor_needs_physical; - struct drm_mm vram; unsigned long cfb_size; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 52cd9b006da2..ef9c6139ee31 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3385,7 +3385,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, /* we only need to pin inside GTT if cursor is non-phy */ mutex_lock(&dev->struct_mutex); - if (!dev_priv->cursor_needs_physical) { + if (!dev_priv->info->cursor_needs_physical) { ret = i915_gem_object_pin(bo, PAGE_SIZE); if (ret) { DRM_ERROR("failed to pin cursor bo\n"); @@ -3420,7 +3420,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, I915_WRITE(base, addr); if (intel_crtc->cursor_bo) { - if (dev_priv->cursor_needs_physical) { + if (dev_priv->info->cursor_needs_physical) { if (intel_crtc->cursor_bo != bo) i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo); } else From b01f2c3a4a37d09a47ad73ccbb46d554d21cfeb0 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 11 Dec 2009 11:07:17 -0800 Subject: [PATCH 0033/1626] drm/i915: only enable hotplug for detected outputs This patch changes around our hotplug enable code a bit to only enable it for ports we actually detect and initialize. This prevents problems with stuck or spurious interrupts on outputs that aren't actually wired up, and is generally more correct. Fixes FDO bug #23183. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 4 ++-- drivers/gpu/drm/i915/i915_irq.c | 30 ++++++++++++++++++---------- drivers/gpu/drm/i915/i915_reg.h | 7 ------- drivers/gpu/drm/i915/intel_crt.c | 2 ++ drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++++++------ drivers/gpu/drm/i915/intel_dp.c | 6 ++++++ drivers/gpu/drm/i915/intel_hdmi.c | 5 +++++ drivers/gpu/drm/i915/intel_sdvo.c | 3 +++ drivers/gpu/drm/i915/intel_tv.c | 2 ++ 9 files changed, 59 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 28d99b8a0490..e3e5d5094232 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1249,6 +1249,8 @@ static int i915_load_modeset_init(struct drm_device *dev, if (ret) goto destroy_ringbuffer; + intel_modeset_init(dev); + ret = drm_irq_install(dev); if (ret) goto destroy_ringbuffer; @@ -1263,8 +1265,6 @@ static int i915_load_modeset_init(struct drm_device *dev, I915_WRITE(INSTPM, (1 << 5) | (1 << 21)); - intel_modeset_init(dev); - drm_helper_initial_config(dev); return 0; diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 85f4c5de97e2..1733eea87840 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1084,6 +1084,10 @@ void i915_driver_irq_preinstall(struct drm_device * dev) (void) I915_READ(IER); } +/* + * Must be called after intel_modeset_init or hotplug interrupts won't be + * enabled correctly. + */ int i915_driver_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -1106,19 +1110,23 @@ int i915_driver_irq_postinstall(struct drm_device *dev) if (I915_HAS_HOTPLUG(dev)) { u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN); - /* Leave other bits alone */ - hotplug_en |= HOTPLUG_EN_MASK; + /* Note HDMI and DP share bits */ + if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS) + hotplug_en |= HDMIB_HOTPLUG_INT_EN; + if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS) + hotplug_en |= HDMIC_HOTPLUG_INT_EN; + if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS) + hotplug_en |= HDMID_HOTPLUG_INT_EN; + if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS) + hotplug_en |= SDVOC_HOTPLUG_INT_EN; + if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS) + hotplug_en |= SDVOB_HOTPLUG_INT_EN; + if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) + hotplug_en |= CRT_HOTPLUG_INT_EN; + /* Ignore TV since it's buggy */ + I915_WRITE(PORT_HOTPLUG_EN, hotplug_en); - dev_priv->hotplug_supported_mask = CRT_HOTPLUG_INT_STATUS | - TV_HOTPLUG_INT_STATUS | SDVOC_HOTPLUG_INT_STATUS | - SDVOB_HOTPLUG_INT_STATUS; - if (IS_G4X(dev)) { - dev_priv->hotplug_supported_mask |= - HDMIB_HOTPLUG_INT_STATUS | - HDMIC_HOTPLUG_INT_STATUS | - HDMID_HOTPLUG_INT_STATUS; - } /* Enable in IER... */ enable_mask |= I915_DISPLAY_PORT_INTERRUPT; /* and unmask in IMR */ diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 974b3cf70618..f79b13324faf 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -879,13 +879,6 @@ #define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2) #define CRT_HOTPLUG_MASK (0x3fc) /* Bits 9-2 */ #define CRT_FORCE_HOTPLUG_MASK 0xfffffe1f -#define HOTPLUG_EN_MASK (HDMIB_HOTPLUG_INT_EN | \ - HDMIC_HOTPLUG_INT_EN | \ - HDMID_HOTPLUG_INT_EN | \ - SDVOB_HOTPLUG_INT_EN | \ - SDVOC_HOTPLUG_INT_EN | \ - CRT_HOTPLUG_INT_EN) - #define PORT_HOTPLUG_STAT 0x61114 #define HDMIB_HOTPLUG_INT_STATUS (1 << 29) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 9f3d3e563414..ddefc871edfe 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -548,4 +548,6 @@ void intel_crt_init(struct drm_device *dev) drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs); drm_sysfs_connector_add(connector); + + dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS; } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index ef9c6139ee31..c21dede6461c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4400,29 +4400,43 @@ static void intel_setup_outputs(struct drm_device *dev) bool found = false; if (I915_READ(SDVOB) & SDVO_DETECTED) { + DRM_DEBUG_KMS("probing SDVOB\n"); found = intel_sdvo_init(dev, SDVOB); - if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) + if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) { + DRM_DEBUG_KMS("probing HDMI on SDVOB\n"); intel_hdmi_init(dev, SDVOB); + } - if (!found && SUPPORTS_INTEGRATED_DP(dev)) + if (!found && SUPPORTS_INTEGRATED_DP(dev)) { + DRM_DEBUG_KMS("probing DP_B\n"); intel_dp_init(dev, DP_B); + } } /* Before G4X SDVOC doesn't have its own detect register */ - if (I915_READ(SDVOB) & SDVO_DETECTED) + if (I915_READ(SDVOB) & SDVO_DETECTED) { + DRM_DEBUG_KMS("probing SDVOC\n"); found = intel_sdvo_init(dev, SDVOC); + } if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) { - if (SUPPORTS_INTEGRATED_HDMI(dev)) + if (SUPPORTS_INTEGRATED_HDMI(dev)) { + DRM_DEBUG_KMS("probing HDMI on SDVOC\n"); intel_hdmi_init(dev, SDVOC); - if (SUPPORTS_INTEGRATED_DP(dev)) + } + if (SUPPORTS_INTEGRATED_DP(dev)) { + DRM_DEBUG_KMS("probing DP_C\n"); intel_dp_init(dev, DP_C); + } } - if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED)) + if (SUPPORTS_INTEGRATED_DP(dev) && + (I915_READ(DP_D) & DP_DETECTED)) { + DRM_DEBUG_KMS("probing DP_D\n"); intel_dp_init(dev, DP_D); + } } else if (IS_I8XX(dev)) intel_dvo_init(dev); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 4e7aa8b7b938..1349d9fd01c4 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1402,14 +1402,20 @@ intel_dp_init(struct drm_device *dev, int output_reg) break; case DP_B: case PCH_DP_B: + dev_priv->hotplug_supported_mask |= + HDMIB_HOTPLUG_INT_STATUS; name = "DPDDC-B"; break; case DP_C: case PCH_DP_C: + dev_priv->hotplug_supported_mask |= + HDMIC_HOTPLUG_INT_STATUS; name = "DPDDC-C"; break; case DP_D: case PCH_DP_D: + dev_priv->hotplug_supported_mask |= + HDMID_HOTPLUG_INT_STATUS; name = "DPDDC-D"; break; } diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index f04dbbe7d400..06431941b233 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -303,21 +303,26 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg) if (sdvox_reg == SDVOB) { intel_output->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT); intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB"); + dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS; } else if (sdvox_reg == SDVOC) { intel_output->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT); intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC"); + dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS; } else if (sdvox_reg == HDMIB) { intel_output->clone_mask = (1 << INTEL_HDMID_CLONE_BIT); intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE, "HDMIB"); + dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS; } else if (sdvox_reg == HDMIC) { intel_output->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT); intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD, "HDMIC"); + dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS; } else if (sdvox_reg == HDMID) { intel_output->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT); intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF, "HDMID"); + dev_priv->hotplug_supported_mask |= HDMID_HOTPLUG_INT_STATUS; } if (!intel_output->ddc_bus) goto err_connector; diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 24a3dc99716c..de5144c8c153 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2662,6 +2662,7 @@ static void intel_sdvo_create_enhance_property(struct drm_connector *connector) bool intel_sdvo_init(struct drm_device *dev, int output_device) { + struct drm_i915_private *dev_priv = dev->dev_private; struct drm_connector *connector; struct intel_output *intel_output; struct intel_sdvo_priv *sdvo_priv; @@ -2708,10 +2709,12 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS"); sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA, "SDVOB/VGA DDC BUS"); + dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS; } else { intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS"); sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA, "SDVOC/VGA DDC BUS"); + dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS; } if (intel_output->ddc_bus == NULL) diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 552ec110b741..1d5b9b7b033f 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1840,6 +1840,8 @@ intel_tv_init(struct drm_device *dev) drm_connector_attach_property(connector, dev->mode_config.tv_bottom_margin_property, tv_priv->margin[TV_MARGIN_BOTTOM]); + + dev_priv->hotplug_supported_mask |= TV_HOTPLUG_INT_STATUS; out: drm_sysfs_connector_add(connector); } From 47376ceba54600cec4dd9e7c4fe8b98e4269633a Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 16 Dec 2009 23:25:50 +0100 Subject: [PATCH 0034/1626] reiserfs: Fix reiserfs lock <-> inode mutex dependency inversion The reiserfs lock -> inode mutex dependency gets inverted when we relax the lock while walking to the tree. To fix this, use a specialized version of reiserfs_mutex_lock_safe that takes care of mutex subclasses. Then we can grab the inode mutex with I_MUTEX_XATTR subclass without any reiserfs lock dependency. This fixes the following report: [ INFO: possible circular locking dependency detected ] 2.6.32-06793-gf405425-dirty #2 ------------------------------------------------------- mv/18566 is trying to acquire lock: (&REISERFS_SB(s)->lock){+.+.+.}, at: [] reiserfs_write_lock+0x28= /0x40 but task is already holding lock: (&sb->s_type->i_mutex_key#5/3){+.+.+.}, at: [] reiserfs_for_each_xattr+0x10c/0x380 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&sb->s_type->i_mutex_key#5/3){+.+.+.}: [] validate_chain+0xa23/0xf70 [] __lock_acquire+0x4e5/0xa70 [] lock_acquire+0x7a/0xa0 [] mutex_lock_nested+0x5f/0x2b0 [] reiserfs_for_each_xattr+0x84/0x380 [] reiserfs_delete_xattrs+0x15/0x50 [] reiserfs_delete_inode+0x8f/0x140 [] generic_delete_inode+0x9c/0x150 [] generic_drop_inode+0x3d/0x60 [] iput+0x47/0x50 [] do_unlinkat+0xdb/0x160 [] sys_unlink+0x10/0x20 [] sysenter_do_call+0x12/0x36 -> #0 (&REISERFS_SB(s)->lock){+.+.+.}: [] validate_chain+0xf68/0xf70 [] __lock_acquire+0x4e5/0xa70 [] lock_acquire+0x7a/0xa0 [] mutex_lock_nested+0x5f/0x2b0 [] reiserfs_write_lock+0x28/0x40 [] search_by_key+0x1f7b/0x21b0 [] search_by_entry_key+0x1f/0x3b0 [] reiserfs_find_entry+0x77/0x400 [] reiserfs_lookup+0x85/0x130 [] __lookup_hash+0xb4/0x110 [] lookup_one_len+0xb3/0x100 [] reiserfs_for_each_xattr+0x120/0x380 [] reiserfs_delete_xattrs+0x15/0x50 [] reiserfs_delete_inode+0x8f/0x140 [] generic_delete_inode+0x9c/0x150 [] generic_drop_inode+0x3d/0x60 [] iput+0x47/0x50 [] dentry_iput+0x6f/0xf0 [] d_kill+0x24/0x50 [] dput+0x5b/0x120 [] sys_renameat+0x1b9/0x230 [] sys_rename+0x28/0x30 [] sysenter_do_call+0x12/0x36 other info that might help us debug this: 2 locks held by mv/18566: #0: (&sb->s_type->i_mutex_key#5/1){+.+.+.}, at: [] lock_rename+0xcc/0xd0 #1: (&sb->s_type->i_mutex_key#5/3){+.+.+.}, at: [] reiserfs_for_each_xattr+0x10c/0x380 stack backtrace: Pid: 18566, comm: mv Tainted: G C 2.6.32-06793-gf405425-dirty #2 Call Trace: [] ? printk+0x18/0x1e [] print_circular_bug+0xc0/0xd0 [] validate_chain+0xf68/0xf70 [] ? trace_hardirqs_off+0xb/0x10 [] __lock_acquire+0x4e5/0xa70 [] lock_acquire+0x7a/0xa0 [] ? reiserfs_write_lock+0x28/0x40 [] mutex_lock_nested+0x5f/0x2b0 [] ? reiserfs_write_lock+0x28/0x40 [] ? reiserfs_write_lock+0x28/0x40 [] ? schedule+0x27a/0x440 [] reiserfs_write_lock+0x28/0x40 [] search_by_key+0x1f7b/0x21b0 [] ? __lock_acquire+0x506/0xa70 [] ? lock_release_non_nested+0x1e7/0x340 [] ? reiserfs_write_lock+0x28/0x40 [] ? trace_hardirqs_on_caller+0x124/0x170 [] ? trace_hardirqs_on+0xb/0x10 [] ? T.316+0x15/0x1a0 [] ? sched_clock_cpu+0x9d/0x100 [] search_by_entry_key+0x1f/0x3b0 [] ? __mutex_unlock_slowpath+0x9a/0x120 [] ? trace_hardirqs_on_caller+0x124/0x170 [] reiserfs_find_entry+0x77/0x400 [] reiserfs_lookup+0x85/0x130 [] ? sched_clock_cpu+0x9d/0x100 [] __lookup_hash+0xb4/0x110 [] lookup_one_len+0xb3/0x100 [] reiserfs_for_each_xattr+0x120/0x380 [] ? delete_one_xattr+0x0/0x1c0 [] ? math_error+0x22/0x150 [] ? reiserfs_write_lock+0x28/0x40 [] reiserfs_delete_xattrs+0x15/0x50 [] ? reiserfs_write_lock+0x28/0x40 [] reiserfs_delete_inode+0x8f/0x140 [] ? generic_delete_inode+0x5f/0x150 [] ? reiserfs_delete_inode+0x0/0x140 [] generic_delete_inode+0x9c/0x150 [] generic_drop_inode+0x3d/0x60 [] iput+0x47/0x50 [] dentry_iput+0x6f/0xf0 [] d_kill+0x24/0x50 [] dput+0x5b/0x120 [] sys_renameat+0x1b9/0x230 [] ? sched_clock_cpu+0x9d/0x100 [] ? trace_hardirqs_off+0xb/0x10 [] ? cpu_clock+0x4e/0x60 [] ? do_page_fault+0x155/0x370 [] ? up_read+0x16/0x30 [] ? do_page_fault+0x155/0x370 [] sys_rename+0x28/0x30 [] sysenter_do_call+0x12/0x36 Reported-by: Alexander Beregalov Signed-off-by: Frederic Weisbecker Cc: Chris Mason Cc: Ingo Molnar Cc: Thomas Gleixner --- fs/reiserfs/xattr.c | 3 ++- include/linux/reiserfs_fs.h | 9 +++++++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 58aa8e75f7f5..8891cd88a3f4 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -243,7 +243,8 @@ static int reiserfs_for_each_xattr(struct inode *inode, goto out_dir; } - mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_XATTR); + reiserfs_mutex_lock_nested_safe(&dir->d_inode->i_mutex, I_MUTEX_XATTR, + inode->i_sb); buf.xadir = dir; err = reiserfs_readdir_dentry(dir, &buf, fill_with_dentries, &pos); while ((err == 0 || err == -ENOSPC) && buf.count) { diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h index a05b4a20768d..4351b49e2b1e 100644 --- a/include/linux/reiserfs_fs.h +++ b/include/linux/reiserfs_fs.h @@ -97,6 +97,15 @@ static inline void reiserfs_mutex_lock_safe(struct mutex *m, reiserfs_write_lock(s); } +static inline void +reiserfs_mutex_lock_nested_safe(struct mutex *m, unsigned int subclass, + struct super_block *s) +{ + reiserfs_write_unlock(s); + mutex_lock_nested(m, subclass); + reiserfs_write_lock(s); +} + /* * When we schedule, we usually want to also release the write lock, * according to the previous bkl based locking scheme of reiserfs. From 2d1c861871d767153538a77c498752b36d4bb4b8 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 9 Dec 2009 17:52:13 +1100 Subject: [PATCH 0035/1626] PCI/cardbus: Add a fixup hook and fix powerpc The cardbus code creates PCI devices without ever going through the necessary fixup bits and pieces that normal PCI devices go through. There's in fact a commented out call to pcibios_fixup_bus() in there, it's commented because ... it doesn't work. I could make pcibios_fixup_bus() do the right thing on powerpc easily but I felt it cleaner instead to provide a specific hook pci_fixup_cardbus for which a weak empty implementation is provided by the PCI core. This fixes cardbus on powerbooks and probably all other PowerPC platforms which was broken completely for ever on some platforms and since 2.6.31 on others such as PowerBooks when we made the DMA ops mandatory (since those are setup by the fixups). Acked-by: Dominik Brodowski Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Jesse Barnes --- arch/powerpc/kernel/pci-common.c | 13 +++++++++++++ drivers/pci/pci.c | 5 +++++ drivers/pcmcia/cardbus.c | 2 +- include/linux/pci.h | 3 +++ 4 files changed, 22 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index e8dfdbd9327a..cadbed679fbb 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1107,6 +1107,12 @@ void __devinit pcibios_setup_bus_devices(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) { struct dev_archdata *sd = &dev->dev.archdata; + /* Cardbus can call us to add new devices to a bus, so ignore + * those who are already fully discovered + */ + if (dev->is_added) + continue; + /* Setup OF node pointer in archdata */ sd->of_node = pci_device_to_OF_node(dev); @@ -1147,6 +1153,13 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) } EXPORT_SYMBOL(pcibios_fixup_bus); +void __devinit pci_fixup_cardbus(struct pci_bus *bus) +{ + /* Now fixup devices on that bus */ + pcibios_setup_bus_devices(bus); +} + + static int skip_isa_ioresource_align(struct pci_dev *dev) { if ((ppc_pci_flags & PPC_PCI_CAN_SKIP_ISA_ALIGN) && diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index d50522bf16b1..864e703cf737 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2798,6 +2798,11 @@ int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev) return 1; } +void __weak pci_fixup_cardbus(struct pci_bus *bus) +{ +} +EXPORT_SYMBOL(pci_fixup_cardbus); + static int __init pci_setup(char *str) { while (str) { diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c index cdf50f3bc2df..d99f846451a3 100644 --- a/drivers/pcmcia/cardbus.c +++ b/drivers/pcmcia/cardbus.c @@ -222,7 +222,7 @@ int __ref cb_alloc(struct pcmcia_socket *s) unsigned int max, pass; s->functions = pci_scan_slot(bus, PCI_DEVFN(0, 0)); -/* pcibios_fixup_bus(bus); */ + pci_fixup_cardbus(bus); max = bus->secondary; for (pass = 0; pass < 2; pass++) diff --git a/include/linux/pci.h b/include/linux/pci.h index bf1e67080849..5da0690d9cee 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -566,6 +566,9 @@ void pcibios_align_resource(void *, struct resource *, resource_size_t, resource_size_t); void pcibios_update_irq(struct pci_dev *, int irq); +/* Weak but can be overriden by arch */ +void pci_fixup_cardbus(struct pci_bus *); + /* Generic PCI functions used internally */ extern struct pci_bus *pci_find_bus(int domain, int busnr); From 3542a113ab2f5880f1b62e5909d754250fb57d6b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 17 Dec 2009 09:41:39 -0700 Subject: [PATCH 0036/1626] sh: fix DMA driver's descriptor chaining and cookie assignment The SH DMA driver wrongly assigns negative cookies to transfer descriptors, also, its chaining of partial descriptors is broken. The latter problem is usually invisible, because maximum transfer size per chunk is 16M, but if you artificially set this limit lower, the driver fails. Since cookies are also used in chunk management, both these problems are fixed in one patch. As side effects a possible memory leak, when descriptors are prepared, but not submitted, and multiple races have also been fixed. Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Acked-by: Nobuhiro Iwamatsu Signed-off-by: Dan Williams --- drivers/dma/shdma.c | 336 ++++++++++++++++++++++++++++---------------- drivers/dma/shdma.h | 9 +- 2 files changed, 219 insertions(+), 126 deletions(-) diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 8d9acd751ed6..9546f5f356eb 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -23,16 +23,19 @@ #include #include #include -#include #include #include #include #include "shdma.h" /* DMA descriptor control */ -#define DESC_LAST (-1) -#define DESC_COMP (1) -#define DESC_NCOMP (0) +enum sh_dmae_desc_status { + DESC_IDLE, + DESC_PREPARED, + DESC_SUBMITTED, + DESC_COMPLETED, /* completed, have to call callback */ + DESC_WAITING, /* callback called, waiting for ack / re-submit */ +}; #define NR_DESCS_PER_CHANNEL 32 /* @@ -45,6 +48,8 @@ */ #define RS_DEFAULT (RS_DUAL) +static void sh_dmae_chan_ld_cleanup(struct sh_dmae_chan *sh_chan, bool all); + #define SH_DMAC_CHAN_BASE(id) (dma_base_addr[id]) static void sh_dmae_writel(struct sh_dmae_chan *sh_dc, u32 data, u32 reg) { @@ -106,11 +111,11 @@ static inline unsigned int calc_xmit_shift(struct sh_dmae_chan *sh_chan) return ts_shift[(chcr & CHCR_TS_MASK) >> CHCR_TS_SHIFT]; } -static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs hw) +static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs *hw) { - sh_dmae_writel(sh_chan, hw.sar, SAR); - sh_dmae_writel(sh_chan, hw.dar, DAR); - sh_dmae_writel(sh_chan, hw.tcr >> calc_xmit_shift(sh_chan), TCR); + sh_dmae_writel(sh_chan, hw->sar, SAR); + sh_dmae_writel(sh_chan, hw->dar, DAR); + sh_dmae_writel(sh_chan, hw->tcr >> calc_xmit_shift(sh_chan), TCR); } static void dmae_start(struct sh_dmae_chan *sh_chan) @@ -184,8 +189,9 @@ static int dmae_set_dmars(struct sh_dmae_chan *sh_chan, u16 val) static dma_cookie_t sh_dmae_tx_submit(struct dma_async_tx_descriptor *tx) { - struct sh_desc *desc = tx_to_sh_desc(tx); + struct sh_desc *desc = tx_to_sh_desc(tx), *chunk, *last = desc, *c; struct sh_dmae_chan *sh_chan = to_sh_chan(tx->chan); + dma_async_tx_callback callback = tx->callback; dma_cookie_t cookie; spin_lock_bh(&sh_chan->desc_lock); @@ -195,45 +201,53 @@ static dma_cookie_t sh_dmae_tx_submit(struct dma_async_tx_descriptor *tx) if (cookie < 0) cookie = 1; - /* If desc only in the case of 1 */ - if (desc->async_tx.cookie != -EBUSY) - desc->async_tx.cookie = cookie; - sh_chan->common.cookie = desc->async_tx.cookie; + sh_chan->common.cookie = cookie; + tx->cookie = cookie; - list_splice_init(&desc->tx_list, sh_chan->ld_queue.prev); + /* Mark all chunks of this descriptor as submitted, move to the queue */ + list_for_each_entry_safe(chunk, c, desc->node.prev, node) { + /* + * All chunks are on the global ld_free, so, we have to find + * the end of the chain ourselves + */ + if (chunk != desc && (chunk->mark == DESC_IDLE || + chunk->async_tx.cookie > 0 || + chunk->async_tx.cookie == -EBUSY || + &chunk->node == &sh_chan->ld_free)) + break; + chunk->mark = DESC_SUBMITTED; + /* Callback goes to the last chunk */ + chunk->async_tx.callback = NULL; + chunk->cookie = cookie; + list_move_tail(&chunk->node, &sh_chan->ld_queue); + last = chunk; + } + + last->async_tx.callback = callback; + last->async_tx.callback_param = tx->callback_param; + + dev_dbg(sh_chan->dev, "submit #%d@%p on %d: %x[%d] -> %x\n", + tx->cookie, &last->async_tx, sh_chan->id, + desc->hw.sar, desc->hw.tcr, desc->hw.dar); spin_unlock_bh(&sh_chan->desc_lock); return cookie; } +/* Called with desc_lock held */ static struct sh_desc *sh_dmae_get_desc(struct sh_dmae_chan *sh_chan) { - struct sh_desc *desc, *_desc, *ret = NULL; + struct sh_desc *desc; - spin_lock_bh(&sh_chan->desc_lock); - list_for_each_entry_safe(desc, _desc, &sh_chan->ld_free, node) { - if (async_tx_test_ack(&desc->async_tx)) { + list_for_each_entry(desc, &sh_chan->ld_free, node) + if (desc->mark != DESC_PREPARED) { + BUG_ON(desc->mark != DESC_IDLE); list_del(&desc->node); - ret = desc; - break; + return desc; } - } - spin_unlock_bh(&sh_chan->desc_lock); - return ret; -} - -static void sh_dmae_put_desc(struct sh_dmae_chan *sh_chan, struct sh_desc *desc) -{ - if (desc) { - spin_lock_bh(&sh_chan->desc_lock); - - list_splice_init(&desc->tx_list, &sh_chan->ld_free); - list_add(&desc->node, &sh_chan->ld_free); - - spin_unlock_bh(&sh_chan->desc_lock); - } + return NULL; } static int sh_dmae_alloc_chan_resources(struct dma_chan *chan) @@ -252,11 +266,10 @@ static int sh_dmae_alloc_chan_resources(struct dma_chan *chan) dma_async_tx_descriptor_init(&desc->async_tx, &sh_chan->common); desc->async_tx.tx_submit = sh_dmae_tx_submit; - desc->async_tx.flags = DMA_CTRL_ACK; - INIT_LIST_HEAD(&desc->tx_list); - sh_dmae_put_desc(sh_chan, desc); + desc->mark = DESC_IDLE; spin_lock_bh(&sh_chan->desc_lock); + list_add(&desc->node, &sh_chan->ld_free); sh_chan->descs_allocated++; } spin_unlock_bh(&sh_chan->desc_lock); @@ -273,7 +286,10 @@ static void sh_dmae_free_chan_resources(struct dma_chan *chan) struct sh_desc *desc, *_desc; LIST_HEAD(list); - BUG_ON(!list_empty(&sh_chan->ld_queue)); + /* Prepared and not submitted descriptors can still be on the queue */ + if (!list_empty(&sh_chan->ld_queue)) + sh_dmae_chan_ld_cleanup(sh_chan, true); + spin_lock_bh(&sh_chan->desc_lock); list_splice_init(&sh_chan->ld_free, &list); @@ -292,6 +308,8 @@ static struct dma_async_tx_descriptor *sh_dmae_prep_memcpy( struct sh_dmae_chan *sh_chan; struct sh_desc *first = NULL, *prev = NULL, *new; size_t copy_size; + LIST_HEAD(tx_list); + int chunks = (len + SH_DMA_TCR_MAX) / (SH_DMA_TCR_MAX + 1); if (!chan) return NULL; @@ -301,108 +319,189 @@ static struct dma_async_tx_descriptor *sh_dmae_prep_memcpy( sh_chan = to_sh_chan(chan); + /* Have to lock the whole loop to protect against concurrent release */ + spin_lock_bh(&sh_chan->desc_lock); + + /* + * Chaining: + * first descriptor is what user is dealing with in all API calls, its + * cookie is at first set to -EBUSY, at tx-submit to a positive + * number + * if more than one chunk is needed further chunks have cookie = -EINVAL + * the last chunk, if not equal to the first, has cookie = -ENOSPC + * all chunks are linked onto the tx_list head with their .node heads + * only during this function, then they are immediately spliced + * back onto the free list in form of a chain + */ do { - /* Allocate the link descriptor from DMA pool */ + /* Allocate the link descriptor from the free list */ new = sh_dmae_get_desc(sh_chan); if (!new) { dev_err(sh_chan->dev, "No free memory for link descriptor\n"); - goto err_get_desc; + list_for_each_entry(new, &tx_list, node) + new->mark = DESC_IDLE; + list_splice(&tx_list, &sh_chan->ld_free); + spin_unlock_bh(&sh_chan->desc_lock); + return NULL; } - copy_size = min(len, (size_t)SH_DMA_TCR_MAX); + copy_size = min(len, (size_t)SH_DMA_TCR_MAX + 1); new->hw.sar = dma_src; new->hw.dar = dma_dest; new->hw.tcr = copy_size; - if (!first) + if (!first) { + /* First desc */ + new->async_tx.cookie = -EBUSY; first = new; + } else { + /* Other desc - invisible to the user */ + new->async_tx.cookie = -EINVAL; + } - new->mark = DESC_NCOMP; - async_tx_ack(&new->async_tx); + dev_dbg(sh_chan->dev, + "chaining %u of %u with %p, dst %x, cookie %d\n", + copy_size, len, &new->async_tx, dma_dest, + new->async_tx.cookie); + + new->mark = DESC_PREPARED; + new->async_tx.flags = flags; + new->chunks = chunks--; prev = new; len -= copy_size; dma_src += copy_size; dma_dest += copy_size; /* Insert the link descriptor to the LD ring */ - list_add_tail(&new->node, &first->tx_list); + list_add_tail(&new->node, &tx_list); } while (len); - new->async_tx.flags = flags; /* client is in control of this ack */ - new->async_tx.cookie = -EBUSY; /* Last desc */ + if (new != first) + new->async_tx.cookie = -ENOSPC; + + /* Put them back on the free list, so, they don't get lost */ + list_splice_tail(&tx_list, &sh_chan->ld_free); + + spin_unlock_bh(&sh_chan->desc_lock); return &first->async_tx; +} -err_get_desc: - sh_dmae_put_desc(sh_chan, first); - return NULL; +static dma_async_tx_callback __ld_cleanup(struct sh_dmae_chan *sh_chan, bool all) +{ + struct sh_desc *desc, *_desc; + /* Is the "exposed" head of a chain acked? */ + bool head_acked = false; + dma_cookie_t cookie = 0; + dma_async_tx_callback callback = NULL; + void *param = NULL; + spin_lock_bh(&sh_chan->desc_lock); + list_for_each_entry_safe(desc, _desc, &sh_chan->ld_queue, node) { + struct dma_async_tx_descriptor *tx = &desc->async_tx; + + BUG_ON(tx->cookie > 0 && tx->cookie != desc->cookie); + BUG_ON(desc->mark != DESC_SUBMITTED && + desc->mark != DESC_COMPLETED && + desc->mark != DESC_WAITING); + + /* + * queue is ordered, and we use this loop to (1) clean up all + * completed descriptors, and to (2) update descriptor flags of + * any chunks in a (partially) completed chain + */ + if (!all && desc->mark == DESC_SUBMITTED && + desc->cookie != cookie) + break; + + if (tx->cookie > 0) + cookie = tx->cookie; + + if (desc->mark == DESC_COMPLETED && desc->chunks == 1) { + BUG_ON(sh_chan->completed_cookie != desc->cookie - 1); + sh_chan->completed_cookie = desc->cookie; + } + + /* Call callback on the last chunk */ + if (desc->mark == DESC_COMPLETED && tx->callback) { + desc->mark = DESC_WAITING; + callback = tx->callback; + param = tx->callback_param; + dev_dbg(sh_chan->dev, "descriptor #%d@%p on %d callback\n", + tx->cookie, tx, sh_chan->id); + BUG_ON(desc->chunks != 1); + break; + } + + if (tx->cookie > 0 || tx->cookie == -EBUSY) { + if (desc->mark == DESC_COMPLETED) { + BUG_ON(tx->cookie < 0); + desc->mark = DESC_WAITING; + } + head_acked = async_tx_test_ack(tx); + } else { + switch (desc->mark) { + case DESC_COMPLETED: + desc->mark = DESC_WAITING; + /* Fall through */ + case DESC_WAITING: + if (head_acked) + async_tx_ack(&desc->async_tx); + } + } + + dev_dbg(sh_chan->dev, "descriptor %p #%d completed.\n", + tx, tx->cookie); + + if (((desc->mark == DESC_COMPLETED || + desc->mark == DESC_WAITING) && + async_tx_test_ack(&desc->async_tx)) || all) { + /* Remove from ld_queue list */ + desc->mark = DESC_IDLE; + list_move(&desc->node, &sh_chan->ld_free); + } + } + spin_unlock_bh(&sh_chan->desc_lock); + + if (callback) + callback(param); + + return callback; } /* * sh_chan_ld_cleanup - Clean up link descriptors * - * This function clean up the ld_queue of DMA channel. + * This function cleans up the ld_queue of DMA channel. */ -static void sh_dmae_chan_ld_cleanup(struct sh_dmae_chan *sh_chan) +static void sh_dmae_chan_ld_cleanup(struct sh_dmae_chan *sh_chan, bool all) { - struct sh_desc *desc, *_desc; - - spin_lock_bh(&sh_chan->desc_lock); - list_for_each_entry_safe(desc, _desc, &sh_chan->ld_queue, node) { - dma_async_tx_callback callback; - void *callback_param; - - /* non send data */ - if (desc->mark == DESC_NCOMP) - break; - - /* send data sesc */ - callback = desc->async_tx.callback; - callback_param = desc->async_tx.callback_param; - - /* Remove from ld_queue list */ - list_splice_init(&desc->tx_list, &sh_chan->ld_free); - - dev_dbg(sh_chan->dev, "link descriptor %p will be recycle.\n", - desc); - - list_move(&desc->node, &sh_chan->ld_free); - /* Run the link descriptor callback function */ - if (callback) { - spin_unlock_bh(&sh_chan->desc_lock); - dev_dbg(sh_chan->dev, "link descriptor %p callback\n", - desc); - callback(callback_param); - spin_lock_bh(&sh_chan->desc_lock); - } - } - spin_unlock_bh(&sh_chan->desc_lock); + while (__ld_cleanup(sh_chan, all)) + ; } static void sh_chan_xfer_ld_queue(struct sh_dmae_chan *sh_chan) { - struct list_head *ld_node; - struct sh_dmae_regs hw; + struct sh_desc *sd; + spin_lock_bh(&sh_chan->desc_lock); /* DMA work check */ - if (dmae_is_busy(sh_chan)) + if (dmae_is_busy(sh_chan)) { + spin_unlock_bh(&sh_chan->desc_lock); return; + } /* Find the first un-transfer desciptor */ - for (ld_node = sh_chan->ld_queue.next; - (ld_node != &sh_chan->ld_queue) - && (to_sh_desc(ld_node)->mark == DESC_COMP); - ld_node = ld_node->next) - cpu_relax(); + list_for_each_entry(sd, &sh_chan->ld_queue, node) + if (sd->mark == DESC_SUBMITTED) { + /* Get the ld start address from ld_queue */ + dmae_set_reg(sh_chan, &sd->hw); + dmae_start(sh_chan); + break; + } - if (ld_node != &sh_chan->ld_queue) { - /* Get the ld start address from ld_queue */ - hw = to_sh_desc(ld_node)->hw; - dmae_set_reg(sh_chan, hw); - dmae_start(sh_chan); - } + spin_unlock_bh(&sh_chan->desc_lock); } static void sh_dmae_memcpy_issue_pending(struct dma_chan *chan) @@ -420,12 +519,11 @@ static enum dma_status sh_dmae_is_complete(struct dma_chan *chan, dma_cookie_t last_used; dma_cookie_t last_complete; - sh_dmae_chan_ld_cleanup(sh_chan); + sh_dmae_chan_ld_cleanup(sh_chan, false); last_used = chan->cookie; last_complete = sh_chan->completed_cookie; - if (last_complete == -EBUSY) - last_complete = last_used; + BUG_ON(last_complete < 0); if (done) *done = last_complete; @@ -480,11 +578,13 @@ static irqreturn_t sh_dmae_err(int irq, void *data) err = sh_dmae_rst(0); if (err) return err; +#ifdef SH_DMAC_BASE1 if (shdev->pdata.mode & SHDMA_DMAOR1) { err = sh_dmae_rst(1); if (err) return err; } +#endif disable_irq(irq); return IRQ_HANDLED; } @@ -494,35 +594,25 @@ static irqreturn_t sh_dmae_err(int irq, void *data) static void dmae_do_tasklet(unsigned long data) { struct sh_dmae_chan *sh_chan = (struct sh_dmae_chan *)data; - struct sh_desc *desc, *_desc, *cur_desc = NULL; + struct sh_desc *desc; u32 sar_buf = sh_dmae_readl(sh_chan, SAR); - list_for_each_entry_safe(desc, _desc, - &sh_chan->ld_queue, node) { - if ((desc->hw.sar + desc->hw.tcr) == sar_buf) { - cur_desc = desc; + spin_lock(&sh_chan->desc_lock); + list_for_each_entry(desc, &sh_chan->ld_queue, node) { + if ((desc->hw.sar + desc->hw.tcr) == sar_buf && + desc->mark == DESC_SUBMITTED) { + dev_dbg(sh_chan->dev, "done #%d@%p dst %u\n", + desc->async_tx.cookie, &desc->async_tx, + desc->hw.dar); + desc->mark = DESC_COMPLETED; break; } } + spin_unlock(&sh_chan->desc_lock); - if (cur_desc) { - switch (cur_desc->async_tx.cookie) { - case 0: /* other desc data */ - break; - case -EBUSY: /* last desc */ - sh_chan->completed_cookie = - cur_desc->async_tx.cookie; - break; - default: /* first desc ( 0 < )*/ - sh_chan->completed_cookie = - cur_desc->async_tx.cookie - 1; - break; - } - cur_desc->mark = DESC_COMP; - } /* Next desc */ sh_chan_xfer_ld_queue(sh_chan); - sh_dmae_chan_ld_cleanup(sh_chan); + sh_dmae_chan_ld_cleanup(sh_chan, false); } static unsigned int get_dmae_irq(unsigned int id) diff --git a/drivers/dma/shdma.h b/drivers/dma/shdma.h index 60b81e529b42..108f1cffb6f5 100644 --- a/drivers/dma/shdma.h +++ b/drivers/dma/shdma.h @@ -13,9 +13,9 @@ #ifndef __DMA_SHDMA_H #define __DMA_SHDMA_H -#include -#include #include +#include +#include #define SH_DMA_TCR_MAX 0x00FFFFFF /* 16MB */ @@ -26,13 +26,16 @@ struct sh_dmae_regs { }; struct sh_desc { - struct list_head tx_list; struct sh_dmae_regs hw; struct list_head node; struct dma_async_tx_descriptor async_tx; + dma_cookie_t cookie; + int chunks; int mark; }; +struct device; + struct sh_dmae_chan { dma_cookie_t completed_cookie; /* The maximum cookie completed */ spinlock_t desc_lock; /* Descriptor operation lock */ From c566ec49159b806db95a90fd8f37448376cd0ad2 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Thu, 17 Dec 2009 16:12:56 +0800 Subject: [PATCH 0037/1626] drm/i915: Reload hangcheck timer too for Ironlake Make sure hangcheck timer won't beat us unexpectedly on Ironlake. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_irq.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 1733eea87840..7cd8110051b6 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -313,6 +313,8 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev) dev_priv->mm.irq_gem_seqno = seqno; trace_i915_gem_request_complete(dev, seqno); DRM_WAKEUP(&dev_priv->irq_queue); + dev_priv->hangcheck_count = 0; + mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD); } if (de_iir & DE_GSE) From cd78809f6191485a90ea6c92c2b58900ab5c156f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Dec 2009 13:52:39 -0700 Subject: [PATCH 0038/1626] ioat3: fix p-disabled q-continuation When continuing a pq calculation the driver needs 3 extra sources. The driver can perform a 3 source calculation with a single descriptor, but needs an extended descriptor to process up to 8 sources in one operation. However, in the p-disabled case only one extra source is needed. When continuing a p-disabled operation there are occasions (i.e. 0 < src_cnt % 8 < 3) where the tail operation does not need an extended descriptor. Properly account for this fact otherwise invalid 'dmacount' values will be written to hardware usually causing the channel to halt with 'invalid descriptor' errors. Cc: Signed-off-by: Dan Williams --- drivers/dma/ioat/dma_v3.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 42f6f10fb0cc..e58ecb29513f 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -650,9 +650,11 @@ __ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result, num_descs = ioat2_xferlen_to_descs(ioat, len); /* we need 2x the number of descriptors to cover greater than 3 - * sources + * sources (we need 1 extra source in the q-only continuation + * case and 3 extra sources in the p+q continuation case. */ - if (src_cnt > 3 || flags & DMA_PREP_CONTINUE) { + if (src_cnt + dmaf_p_disabled_continue(flags) > 3 || + (dmaf_continue(flags) && !dmaf_p_disabled_continue(flags))) { with_ext = 1; num_descs *= 2; } else From e02a0e47a3f061c1a53fc4376332a988ec047e8a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Dec 2009 13:55:38 -0700 Subject: [PATCH 0039/1626] async_tx: expand async raid6 test to cover ioatdma corner case Add explicit 11 and 12 disks cases to exercise the 0 < src_cnt % 8 < 3 corner case in the ioatdma driver. Signed-off-by: Dan Williams --- crypto/async_tx/raid6test.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/crypto/async_tx/raid6test.c b/crypto/async_tx/raid6test.c index 3ec27c7e62ea..f84f6b4301d9 100644 --- a/crypto/async_tx/raid6test.c +++ b/crypto/async_tx/raid6test.c @@ -214,6 +214,13 @@ static int raid6_test(void) err += test(4, &tests); if (NDISKS > 5) err += test(5, &tests); + /* the 11 and 12 disk cases are special for ioatdma (p-disabled + * q-continuation without extended descriptor) + */ + if (NDISKS > 12) { + err += test(11, &tests); + err += test(12, &tests); + } err += test(NDISKS, &tests); pr("\n"); From d54e7929d8073b0fff8af16f8ff6ebbba6fc4154 Mon Sep 17 00:00:00 2001 From: Thomas Champagne Date: Fri, 18 Dec 2009 03:41:41 +0300 Subject: [PATCH 0040/1626] pmu_battery: Fix battery full reporting Prior to this patch, pmu_battery was unable to report battery full status. This patch fixes the issue by adding a proper handling code into pmu_bat_get_property(): if we're on AC and the battery isn't charging, then the battery is considered full. Signed-off-by: Thomas Champagne Acked-By: David Woodhouse Signed-off-by: Anton Vorontsov --- drivers/power/pmu_battery.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/power/pmu_battery.c b/drivers/power/pmu_battery.c index 9346a862f1f2..9c87ad564803 100644 --- a/drivers/power/pmu_battery.c +++ b/drivers/power/pmu_battery.c @@ -89,6 +89,8 @@ static int pmu_bat_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_STATUS: if (pbi->flags & PMU_BATT_CHARGING) val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (pmu_power_flags & PMU_PWR_AC_PRESENT) + val->intval = POWER_SUPPLY_STATUS_FULL; else val->intval = POWER_SUPPLY_STATUS_DISCHARGING; break; From 1de6129f381b4907013ccea08a3bdea8c966d50a Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 18 Dec 2009 12:37:48 +0100 Subject: [PATCH 0041/1626] block: remove Documentation/block/as-iosched.txt Commit 492af6350a5ccf087e4964104a276ed358811458 removed the AS IO scheduler, so remove its documentation too. Signed-off-by: FUJITA Tomonori Signed-off-by: Jens Axboe --- Documentation/block/00-INDEX | 2 - Documentation/block/as-iosched.txt | 172 ----------------------------- 2 files changed, 174 deletions(-) delete mode 100644 Documentation/block/as-iosched.txt diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX index 961a0513f8c3..a406286f6f3e 100644 --- a/Documentation/block/00-INDEX +++ b/Documentation/block/00-INDEX @@ -1,7 +1,5 @@ 00-INDEX - This file -as-iosched.txt - - Anticipatory IO scheduler barrier.txt - I/O Barriers biodoc.txt diff --git a/Documentation/block/as-iosched.txt b/Documentation/block/as-iosched.txt deleted file mode 100644 index 738b72be128e..000000000000 --- a/Documentation/block/as-iosched.txt +++ /dev/null @@ -1,172 +0,0 @@ -Anticipatory IO scheduler -------------------------- -Nick Piggin 13 Sep 2003 - -Attention! Database servers, especially those using "TCQ" disks should -investigate performance with the 'deadline' IO scheduler. Any system with high -disk performance requirements should do so, in fact. - -If you see unusual performance characteristics of your disk systems, or you -see big performance regressions versus the deadline scheduler, please email -me. Database users don't bother unless you're willing to test a lot of patches -from me ;) its a known issue. - -Also, users with hardware RAID controllers, doing striping, may find -highly variable performance results with using the as-iosched. The -as-iosched anticipatory implementation is based on the notion that a disk -device has only one physical seeking head. A striped RAID controller -actually has a head for each physical device in the logical RAID device. - -However, setting the antic_expire (see tunable parameters below) produces -very similar behavior to the deadline IO scheduler. - -Selecting IO schedulers ------------------------ -Refer to Documentation/block/switching-sched.txt for information on -selecting an io scheduler on a per-device basis. - -Anticipatory IO scheduler Policies ----------------------------------- -The as-iosched implementation implements several layers of policies -to determine when an IO request is dispatched to the disk controller. -Here are the policies outlined, in order of application. - -1. one-way Elevator algorithm. - -The elevator algorithm is similar to that used in deadline scheduler, with -the addition that it allows limited backward movement of the elevator -(i.e. seeks backwards). A seek backwards can occur when choosing between -two IO requests where one is behind the elevator's current position, and -the other is in front of the elevator's position. If the seek distance to -the request in back of the elevator is less than half the seek distance to -the request in front of the elevator, then the request in back can be chosen. -Backward seeks are also limited to a maximum of MAXBACK (1024*1024) sectors. -This favors forward movement of the elevator, while allowing opportunistic -"short" backward seeks. - -2. FIFO expiration times for reads and for writes. - -This is again very similar to the deadline IO scheduler. The expiration -times for requests on these lists is tunable using the parameters read_expire -and write_expire discussed below. When a read or a write expires in this way, -the IO scheduler will interrupt its current elevator sweep or read anticipation -to service the expired request. - -3. Read and write request batching - -A batch is a collection of read requests or a collection of write -requests. The as scheduler alternates dispatching read and write batches -to the driver. In the case a read batch, the scheduler submits read -requests to the driver as long as there are read requests to submit, and -the read batch time limit has not been exceeded (read_batch_expire). -The read batch time limit begins counting down only when there are -competing write requests pending. - -In the case of a write batch, the scheduler submits write requests to -the driver as long as there are write requests available, and the -write batch time limit has not been exceeded (write_batch_expire). -However, the length of write batches will be gradually shortened -when read batches frequently exceed their time limit. - -When changing between batch types, the scheduler waits for all requests -from the previous batch to complete before scheduling requests for the -next batch. - -The read and write fifo expiration times described in policy 2 above -are checked only when in scheduling IO of a batch for the corresponding -(read/write) type. So for example, the read FIFO timeout values are -tested only during read batches. Likewise, the write FIFO timeout -values are tested only during write batches. For this reason, -it is generally not recommended for the read batch time -to be longer than the write expiration time, nor for the write batch -time to exceed the read expiration time (see tunable parameters below). - -When the IO scheduler changes from a read to a write batch, -it begins the elevator from the request that is on the head of the -write expiration FIFO. Likewise, when changing from a write batch to -a read batch, scheduler begins the elevator from the first entry -on the read expiration FIFO. - -4. Read anticipation. - -Read anticipation occurs only when scheduling a read batch. -This implementation of read anticipation allows only one read request -to be dispatched to the disk controller at a time. In -contrast, many write requests may be dispatched to the disk controller -at a time during a write batch. It is this characteristic that can make -the anticipatory scheduler perform anomalously with controllers supporting -TCQ, or with hardware striped RAID devices. Setting the antic_expire -queue parameter (see below) to zero disables this behavior, and the -anticipatory scheduler behaves essentially like the deadline scheduler. - -When read anticipation is enabled (antic_expire is not zero), reads -are dispatched to the disk controller one at a time. -At the end of each read request, the IO scheduler examines its next -candidate read request from its sorted read list. If that next request -is from the same process as the request that just completed, -or if the next request in the queue is "very close" to the -just completed request, it is dispatched immediately. Otherwise, -statistics (average think time, average seek distance) on the process -that submitted the just completed request are examined. If it seems -likely that that process will submit another request soon, and that -request is likely to be near the just completed request, then the IO -scheduler will stop dispatching more read requests for up to (antic_expire) -milliseconds, hoping that process will submit a new request near the one -that just completed. If such a request is made, then it is dispatched -immediately. If the antic_expire wait time expires, then the IO scheduler -will dispatch the next read request from the sorted read queue. - -To decide whether an anticipatory wait is worthwhile, the scheduler -maintains statistics for each process that can be used to compute -mean "think time" (the time between read requests), and mean seek -distance for that process. One observation is that these statistics -are associated with each process, but those statistics are not associated -with a specific IO device. So for example, if a process is doing IO -on several file systems on separate devices, the statistics will be -a combination of IO behavior from all those devices. - - -Tuning the anticipatory IO scheduler ------------------------------------- -When using 'as', the anticipatory IO scheduler there are 5 parameters under -/sys/block/*/queue/iosched/. All are units of milliseconds. - -The parameters are: -* read_expire - Controls how long until a read request becomes "expired". It also controls the - interval between which expired requests are served, so set to 50, a request - might take anywhere < 100ms to be serviced _if_ it is the next on the - expired list. Obviously request expiration strategies won't make the disk - go faster. The result basically equates to the timeslice a single reader - gets in the presence of other IO. 100*((seek time / read_expire) + 1) is - very roughly the % streaming read efficiency your disk should get with - multiple readers. - -* read_batch_expire - Controls how much time a batch of reads is given before pending writes are - served. A higher value is more efficient. This might be set below read_expire - if writes are to be given higher priority than reads, but reads are to be - as efficient as possible when there are no writes. Generally though, it - should be some multiple of read_expire. - -* write_expire, and -* write_batch_expire are equivalent to the above, for writes. - -* antic_expire - Controls the maximum amount of time we can anticipate a good read (one - with a short seek distance from the most recently completed request) before - giving up. Many other factors may cause anticipation to be stopped early, - or some processes will not be "anticipated" at all. Should be a bit higher - for big seek time devices though not a linear correspondence - most - processes have only a few ms thinktime. - -In addition to the tunables above there is a read-only file named est_time -which, when read, will show: - - - The probability of a task exiting without a cooperating task - submitting an anticipated IO. - - - The current mean think time. - - - The seek distance used to determine if an incoming IO is better. - From 4a63b030d75a063b910b2bab014d84837cb33eb7 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 18 Dec 2009 12:38:11 +0100 Subject: [PATCH 0042/1626] drbd: fix test of unsigned in _drbd_fault_random() rsp->count is unsigned so the test does not work. Signed-off-by: Roel Kluin Cc: Lars Ellenberg Cc: Philipp Reisner Signed-off-by: Jens Axboe --- drivers/block/drbd/drbd_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 157d1e4343c2..c2594c137e65 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -3623,7 +3623,7 @@ _drbd_fault_random(struct fault_random_state *rsp) { long refresh; - if (--rsp->count < 0) { + if (!rsp->count--) { get_random_bytes(&refresh, sizeof(refresh)); rsp->state += refresh; rsp->count = FAULT_RANDOM_REFRESH; From 1db32c40600437c5e049796bd32f49f61244c6ef Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Wed, 16 Dec 2009 17:52:57 -0500 Subject: [PATCH 0043/1626] cfq-iosched: Remove the check for same cfq group from allow_merge o allow_merge() already checks if submitting task is pointing to same cfqq as rq has been queued in. If everything is fine, we should not be having a task in one cgroup and having a pointer to cfqq in other cgroup. Well I guess in some situations it can happen and that is, when a random IO queue has been moved into root cgroup for group_isolation=0. In this case, tasks's cgroup/group is different from where actually cfqq is, but this is intentional and in this case merging should be allowed. The second situation is where due to close cooperator patches, multiple processes can be sharing a cfqq. If everything implemented right, we should not end up in a situation where tasks from different processes in different groups are sharing the same cfqq as we allow merging of cooperating queues only if they are in same group. Signed-off-by: Vivek Goyal Reviewed-by: Gui Jianfeng Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index e2f80463ed0d..a0e5347767d9 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1513,9 +1513,6 @@ static int cfq_allow_merge(struct request_queue *q, struct request *rq, struct cfq_io_context *cic; struct cfq_queue *cfqq; - /* Deny merge if bio and rq don't belong to same cfq group */ - if ((RQ_CFQQ(rq))->cfqg != cfq_get_cfqg(cfqd, 0)) - return false; /* * Disallow merge of a sync bio into an async request. */ From fb104db41e6e006c85ce1097f372cd1e10c1755c Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Wed, 16 Dec 2009 17:52:58 -0500 Subject: [PATCH 0044/1626] cfq-iosched: Get rid of nr_groups o Currently code does not seem to be using cfqd->nr_groups. Get rid of it. Signed-off-by: Vivek Goyal Reviewed-by: Gui Jianfeng Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index a0e5347767d9..d9bfa09e68c1 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -208,8 +208,6 @@ struct cfq_data { /* Root service tree for cfq_groups */ struct cfq_rb_root grp_service_tree; struct cfq_group root_group; - /* Number of active cfq groups on group service tree */ - int nr_groups; /* * The priority currently being served @@ -842,7 +840,6 @@ cfq_group_service_tree_add(struct cfq_data *cfqd, struct cfq_group *cfqg) __cfq_group_service_tree_add(st, cfqg); cfqg->on_st = true; - cfqd->nr_groups++; st->total_weight += cfqg->weight; } @@ -863,7 +860,6 @@ cfq_group_service_tree_del(struct cfq_data *cfqd, struct cfq_group *cfqg) cfq_log_cfqg(cfqd, cfqg, "del_from_rr group"); cfqg->on_st = false; - cfqd->nr_groups--; st->total_weight -= cfqg->weight; if (!RB_EMPTY_NODE(&cfqg->rb_node)) cfq_rb_erase(&cfqg->rb_node, st); From 65b32a573eefa1cdd3cbe5ea59326308e6c3b9ad Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Wed, 16 Dec 2009 17:52:59 -0500 Subject: [PATCH 0045/1626] cfq-iosched: Remove prio_change logic for workload selection o CFQ now internally divides cfq queues in therr workload categories. sync-idle, sync-noidle and async. Which workload to run depends primarily on rb_key offset across three service trees. Which is a combination of mulitiple things including what time queue got queued on the service tree. There is one exception though. That is if we switched the prio class, say we served some RT tasks and again started serving BE class, then with-in BE class we always started with sync-noidle workload irrespective of rb_key offset in service trees. This can provide better latencies for sync-noidle workload in the presence of RT tasks. o This patch gets rid of that exception and which workload to run with-in class always depends on lowest rb_key across service trees. The reason being that now we have multiple BE class groups and if we always switch to sync-noidle workload with-in group, we can potentially starve a sync-idle workload with-in group. Same is true for async workload which will be in root group. Also the workload-switching with-in group will become very unpredictable as it now depends whether some RT workload was running in the system or not. Signed-off-by: Vivek Goyal Reviewed-by: Gui Jianfeng Acked-by: Corrado Zoccolo Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 48 ++++++++++++--------------------------------- 1 file changed, 12 insertions(+), 36 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index d9bfa09e68c1..8df4fe58f4e7 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -292,8 +292,7 @@ static struct cfq_group *cfq_get_next_cfqg(struct cfq_data *cfqd); static struct cfq_rb_root *service_tree_for(struct cfq_group *cfqg, enum wl_prio_t prio, - enum wl_type_t type, - struct cfq_data *cfqd) + enum wl_type_t type) { if (!cfqg) return NULL; @@ -1146,7 +1145,7 @@ static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq, #endif service_tree = service_tree_for(cfqq->cfqg, cfqq_prio(cfqq), - cfqq_type(cfqq), cfqd); + cfqq_type(cfqq)); if (cfq_class_idle(cfqq)) { rb_key = CFQ_IDLE_DELAY; parent = rb_last(&service_tree->rb); @@ -1609,7 +1608,7 @@ static struct cfq_queue *cfq_get_next_queue(struct cfq_data *cfqd) { struct cfq_rb_root *service_tree = service_tree_for(cfqd->serving_group, cfqd->serving_prio, - cfqd->serving_type, cfqd); + cfqd->serving_type); if (!cfqd->rq_queued) return NULL; @@ -1956,8 +1955,7 @@ static void cfq_setup_merge(struct cfq_queue *cfqq, struct cfq_queue *new_cfqq) } static enum wl_type_t cfq_choose_wl(struct cfq_data *cfqd, - struct cfq_group *cfqg, enum wl_prio_t prio, - bool prio_changed) + struct cfq_group *cfqg, enum wl_prio_t prio) { struct cfq_queue *queue; int i; @@ -1965,24 +1963,9 @@ static enum wl_type_t cfq_choose_wl(struct cfq_data *cfqd, unsigned long lowest_key = 0; enum wl_type_t cur_best = SYNC_NOIDLE_WORKLOAD; - if (prio_changed) { - /* - * When priorities switched, we prefer starting - * from SYNC_NOIDLE (first choice), or just SYNC - * over ASYNC - */ - if (service_tree_for(cfqg, prio, cur_best, cfqd)->count) - return cur_best; - cur_best = SYNC_WORKLOAD; - if (service_tree_for(cfqg, prio, cur_best, cfqd)->count) - return cur_best; - - return ASYNC_WORKLOAD; - } - - for (i = 0; i < 3; ++i) { - /* otherwise, select the one with lowest rb_key */ - queue = cfq_rb_first(service_tree_for(cfqg, prio, i, cfqd)); + for (i = 0; i <= SYNC_WORKLOAD; ++i) { + /* select the one with lowest rb_key */ + queue = cfq_rb_first(service_tree_for(cfqg, prio, i)); if (queue && (!key_valid || time_before(queue->rb_key, lowest_key))) { lowest_key = queue->rb_key; @@ -1996,8 +1979,6 @@ static enum wl_type_t cfq_choose_wl(struct cfq_data *cfqd, static void choose_service_tree(struct cfq_data *cfqd, struct cfq_group *cfqg) { - enum wl_prio_t previous_prio = cfqd->serving_prio; - bool prio_changed; unsigned slice; unsigned count; struct cfq_rb_root *st; @@ -2025,24 +2006,19 @@ static void choose_service_tree(struct cfq_data *cfqd, struct cfq_group *cfqg) * (SYNC, SYNC_NOIDLE, ASYNC), and to compute a workload * expiration time */ - prio_changed = (cfqd->serving_prio != previous_prio); - st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type, - cfqd); + st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type); count = st->count; /* - * If priority didn't change, check workload expiration, - * and that we still have other queues ready + * check workload expiration, and that we still have other queues ready */ - if (!prio_changed && count && - !time_after(jiffies, cfqd->workload_expires)) + if (count && !time_after(jiffies, cfqd->workload_expires)) return; /* otherwise select new workload type */ cfqd->serving_type = - cfq_choose_wl(cfqd, cfqg, cfqd->serving_prio, prio_changed); - st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type, - cfqd); + cfq_choose_wl(cfqd, cfqg, cfqd->serving_prio); + st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type); count = st->count; /* From 8bee738bb1979c8bf7b42716b772522ab7d26b0c Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Fri, 18 Dec 2009 10:40:13 -0500 Subject: [PATCH 0046/1626] x86: Fix objdump version check in chkobjdump.awk for different formats. Different version of objdump says its version in different way; GNU objdump 2.16.1 or GNU objdump version 2.19.51.0.14-1.fc11 20090722 This patch uses the first argument which starts with a number as version string. Changes in v2: - Remove unneeded increment. Signed-off-by: Masami Hiramatsu LKML-Reference: <20091218154012.16960.5113.stgit@dhcp-100-2-132.bos.redhat.com> Suggested-by: H. Peter Anvin Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Andrew Morton Signed-off-by: H. Peter Anvin --- arch/x86/tools/chkobjdump.awk | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/arch/x86/tools/chkobjdump.awk b/arch/x86/tools/chkobjdump.awk index 5bbb5a33f220..fd1ab80be0de 100644 --- a/arch/x86/tools/chkobjdump.awk +++ b/arch/x86/tools/chkobjdump.awk @@ -8,14 +8,24 @@ BEGIN { od_sver = 19; } -/^GNU/ { - split($3, ver, "."); +/^GNU objdump/ { + verstr = "" + for (i = 3; i <= NF; i++) + if (match($(i), "^[0-9]")) { + verstr = $(i); + break; + } + if (verstr == "") { + printf("Warning: Failed to find objdump version number.\n"); + exit 0; + } + split(verstr, ver, "."); if (ver[1] > od_ver || (ver[1] == od_ver && ver[2] >= od_sver)) { exit 1; } else { printf("Warning: objdump version %s is older than %d.%d\n", - $4, od_ver, od_sver); + verstr, od_ver, od_sver); print("Warning: Skipping posttest."); # Logic is inverted, because we just skip test without error. exit 0; From 0422a4fc2c6a41c3d4184984797512af2650014e Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 18 Dec 2009 16:35:58 -0200 Subject: [PATCH 0047/1626] perf diff: Fix usage array, it must end with a NULL entry Fixing this: [acme@doppio linux-2.6-tip]$ perf diff --hell Error: unknown option `hell' usage: perf diff [] [old_file] [new_file] Segmentation fault [acme@doppio linux-2.6-tip]$ Also go over the other such arrays to check if they all were OK, they are, but there were some minor changes to do like making one static and renaming another to match the command it refers to. Signed-off-by: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Paul Mackerras LKML-Reference: <1261161358-23959-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar --- tools/perf/builtin-buildid-list.c | 2 +- tools/perf/builtin-diff.c | 3 ++- tools/perf/builtin-report.c | 3 +-- tools/perf/builtin-trace.c | 4 ++-- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/tools/perf/builtin-buildid-list.c b/tools/perf/builtin-buildid-list.c index e693e6777af5..1e99ac806913 100644 --- a/tools/perf/builtin-buildid-list.c +++ b/tools/perf/builtin-buildid-list.c @@ -17,7 +17,7 @@ static char const *input_name = "perf.data"; static int force; -static const char *const buildid_list_usage[] = { +static const char * const buildid_list_usage[] = { "perf buildid-list []", NULL }; diff --git a/tools/perf/builtin-diff.c b/tools/perf/builtin-diff.c index 4d33b55d5584..bd71b8ceafb7 100644 --- a/tools/perf/builtin-diff.c +++ b/tools/perf/builtin-diff.c @@ -189,8 +189,9 @@ out_delete: return ret; } -static const char *const diff_usage[] = { +static const char * const diff_usage[] = { "perf diff [] [old_file] [new_file]", + NULL, }; static const struct option options[] = { diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 5c2ab5357ec6..db10c0e8ecae 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -294,8 +294,7 @@ setup: return 0; } -//static const char * const report_usage[] = { -const char * const report_usage[] = { +static const char * const report_usage[] = { "perf report [] ", NULL }; diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index e2285e28720f..574a215e800b 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -512,7 +512,7 @@ static char *get_script_path(const char *script_root, const char *suffix) return path; } -static const char * const annotate_usage[] = { +static const char * const trace_usage[] = { "perf trace [] ", NULL }; @@ -581,7 +581,7 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used) setup_scripting(); - argc = parse_options(argc, argv, options, annotate_usage, + argc = parse_options(argc, argv, options, trace_usage, PARSE_OPT_STOP_AT_NON_OPTION); if (symbol__init() < 0) From 14ace024b1e16d2bb9445c8387494fbbd820a738 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 18 Dec 2009 16:28:05 -0500 Subject: [PATCH 0048/1626] SUNRPC: Fix up an error return value in gss_import_sec_context_kerberos() If the context allocation fails, the function currently returns a random error code, since the variable 'p' still points to a valid memory location. Ensure that it returns ENOMEM... Cc: stable@kernel.org Signed-off-by: Trond Myklebust --- net/sunrpc/auth_gss/gss_krb5_mech.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c index ef45eba22485..2deb0ed72ff4 100644 --- a/net/sunrpc/auth_gss/gss_krb5_mech.c +++ b/net/sunrpc/auth_gss/gss_krb5_mech.c @@ -131,8 +131,10 @@ gss_import_sec_context_kerberos(const void *p, struct krb5_ctx *ctx; int tmp; - if (!(ctx = kzalloc(sizeof(*ctx), GFP_NOFS))) + if (!(ctx = kzalloc(sizeof(*ctx), GFP_NOFS))) { + p = ERR_PTR(-ENOMEM); goto out_err; + } p = simple_get_bytes(p, end, &ctx->initiate, sizeof(ctx->initiate)); if (IS_ERR(p)) From b891e4a05ef6beac85465295a032431577c66b16 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 18 Dec 2009 16:28:12 -0500 Subject: [PATCH 0049/1626] SUNRPC: Fix the return value in gss_import_sec_context() If the context allocation fails, it will return GSS_S_FAILURE, which is neither a valid error code, nor is it even negative. Return ENOMEM instead... Reported-by: Jeff Layton Cc: stable@kernel.org Signed-off-by: Trond Myklebust --- net/sunrpc/auth_gss/gss_mech_switch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/auth_gss/gss_mech_switch.c b/net/sunrpc/auth_gss/gss_mech_switch.c index 6efbb0cd3c7c..76e4c6f4ac3c 100644 --- a/net/sunrpc/auth_gss/gss_mech_switch.c +++ b/net/sunrpc/auth_gss/gss_mech_switch.c @@ -252,7 +252,7 @@ gss_import_sec_context(const void *input_token, size_t bufsize, struct gss_ctx **ctx_id) { if (!(*ctx_id = kzalloc(sizeof(**ctx_id), GFP_KERNEL))) - return GSS_S_FAILURE; + return -ENOMEM; (*ctx_id)->mech_type = gss_mech_get(mech); return mech->gm_ops From 486bad2e40e938cd68fd853b7a9fa3115a9d3a4a Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 18 Dec 2009 16:28:20 -0500 Subject: [PATCH 0050/1626] sunrpc: on successful gss error pipe write, don't return error When handling the gssd downcall, the kernel should distinguish between a successful downcall that contains an error code and a failed downcall (i.e. where the parsing failed or some other sort of problem occurred). In the former case, gss_pipe_downcall should be returning the number of bytes written to the pipe instead of an error. In the event of other errors, we generally want the initiating task to retry the upcall so we set msg.errno to -EAGAIN. An unexpected error code here is a bug however, so BUG() in that case. Signed-off-by: Jeff Layton Cc: stable@kernel.org Signed-off-by: Trond Myklebust --- net/sunrpc/auth_gss/auth_gss.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 3c3c50f38a1c..66cb89c18347 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -644,7 +644,22 @@ gss_pipe_downcall(struct file *filp, const char __user *src, size_t mlen) p = gss_fill_context(p, end, ctx, gss_msg->auth->mech); if (IS_ERR(p)) { err = PTR_ERR(p); - gss_msg->msg.errno = (err == -EAGAIN) ? -EAGAIN : -EACCES; + switch (err) { + case -EACCES: + gss_msg->msg.errno = err; + err = mlen; + break; + case -EFAULT: + case -ENOMEM: + case -EINVAL: + case -ENOSYS: + gss_msg->msg.errno = -EAGAIN; + break; + default: + printk(KERN_CRIT "%s: bad return from " + "gss_fill_context: %ld\n", __func__, err); + BUG(); + } goto err_release_msg; } gss_msg->ctx = gss_get_ctx(ctx); From a6d52d70677e99bdb89b6921c265d0a58c22e597 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 19 Dec 2009 15:36:02 -0700 Subject: [PATCH 0051/1626] ioat2,3: put channel hardware in known state at init Put the ioat2 and ioat3 state machines in the halted state with all errors cleared. The ioat1 init path is not disturbed for stability, there are no reported ioat1 initiaization issues. Cc: Reported-by: Roland Dreier Tested-by: Roland Dreier Acked-by: Simon Horman Signed-off-by: Dan Williams --- drivers/dma/ioat/dma.c | 2 +- drivers/dma/ioat/dma.h | 18 ++++++++++ drivers/dma/ioat/dma_v2.c | 69 +++++++++++++++++++++++++++--------- drivers/dma/ioat/dma_v2.h | 2 ++ drivers/dma/ioat/dma_v3.c | 54 ++++++++++++++++++++-------- drivers/dma/ioat/registers.h | 1 + 6 files changed, 114 insertions(+), 32 deletions(-) diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index c524d36d3c2e..dcc4ab78b32b 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -1032,7 +1032,7 @@ int __devinit ioat_probe(struct ioatdma_device *device) dma->dev = &pdev->dev; if (!dma->chancnt) { - dev_err(dev, "zero channels detected\n"); + dev_err(dev, "channel enumeration error\n"); goto err_setup_interrupts; } diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index 45edde996480..bbc3e78ef333 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -60,6 +60,7 @@ * @dca: direct cache access context * @intr_quirk: interrupt setup quirk (for ioat_v1 devices) * @enumerate_channels: hw version specific channel enumeration + * @reset_hw: hw version specific channel (re)initialization * @cleanup_tasklet: select between the v2 and v3 cleanup routines * @timer_fn: select between the v2 and v3 timer watchdog routines * @self_test: hardware version specific self test for each supported op type @@ -78,6 +79,7 @@ struct ioatdma_device { struct dca_provider *dca; void (*intr_quirk)(struct ioatdma_device *device); int (*enumerate_channels)(struct ioatdma_device *device); + int (*reset_hw)(struct ioat_chan_common *chan); void (*cleanup_tasklet)(unsigned long data); void (*timer_fn)(unsigned long data); int (*self_test)(struct ioatdma_device *device); @@ -264,6 +266,22 @@ static inline void ioat_suspend(struct ioat_chan_common *chan) writeb(IOAT_CHANCMD_SUSPEND, chan->reg_base + IOAT_CHANCMD_OFFSET(ver)); } +static inline void ioat_reset(struct ioat_chan_common *chan) +{ + u8 ver = chan->device->version; + + writeb(IOAT_CHANCMD_RESET, chan->reg_base + IOAT_CHANCMD_OFFSET(ver)); +} + +static inline bool ioat_reset_pending(struct ioat_chan_common *chan) +{ + u8 ver = chan->device->version; + u8 cmd; + + cmd = readb(chan->reg_base + IOAT_CHANCMD_OFFSET(ver)); + return (cmd & IOAT_CHANCMD_RESET) == IOAT_CHANCMD_RESET; +} + static inline void ioat_set_chainaddr(struct ioat_dma_chan *ioat, u64 addr) { struct ioat_chan_common *chan = &ioat->base; diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index 8f1f7f05deaa..5f7a500e18d0 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -239,20 +239,50 @@ void __ioat2_restart_chan(struct ioat2_dma_chan *ioat) __ioat2_start_null_desc(ioat); } -static void ioat2_restart_channel(struct ioat2_dma_chan *ioat) +int ioat2_quiesce(struct ioat_chan_common *chan, unsigned long tmo) { - struct ioat_chan_common *chan = &ioat->base; - unsigned long phys_complete; + unsigned long end = jiffies + tmo; + int err = 0; u32 status; status = ioat_chansts(chan); if (is_ioat_active(status) || is_ioat_idle(status)) ioat_suspend(chan); while (is_ioat_active(status) || is_ioat_idle(status)) { + if (end && time_after(jiffies, end)) { + err = -ETIMEDOUT; + break; + } status = ioat_chansts(chan); cpu_relax(); } + return err; +} + +int ioat2_reset_sync(struct ioat_chan_common *chan, unsigned long tmo) +{ + unsigned long end = jiffies + tmo; + int err = 0; + + ioat_reset(chan); + while (ioat_reset_pending(chan)) { + if (end && time_after(jiffies, end)) { + err = -ETIMEDOUT; + break; + } + cpu_relax(); + } + + return err; +} + +static void ioat2_restart_channel(struct ioat2_dma_chan *ioat) +{ + struct ioat_chan_common *chan = &ioat->base; + unsigned long phys_complete; + + ioat2_quiesce(chan, 0); if (ioat_cleanup_preamble(chan, &phys_complete)) __cleanup(ioat, phys_complete); @@ -318,6 +348,19 @@ void ioat2_timer_event(unsigned long data) spin_unlock_bh(&chan->cleanup_lock); } +static int ioat2_reset_hw(struct ioat_chan_common *chan) +{ + /* throw away whatever the channel was doing and get it initialized */ + u32 chanerr; + + ioat2_quiesce(chan, msecs_to_jiffies(100)); + + chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET); + + return ioat2_reset_sync(chan, msecs_to_jiffies(200)); +} + /** * ioat2_enumerate_channels - find and initialize the device's channels * @device: the device to be enumerated @@ -360,6 +403,10 @@ int ioat2_enumerate_channels(struct ioatdma_device *device) (unsigned long) ioat); ioat->xfercap_log = xfercap_log; spin_lock_init(&ioat->ring_lock); + if (device->reset_hw(&ioat->base)) { + i = 0; + break; + } } dma->chancnt = i; return i; @@ -467,7 +514,6 @@ int ioat2_alloc_chan_resources(struct dma_chan *c) struct ioat2_dma_chan *ioat = to_ioat2_chan(c); struct ioat_chan_common *chan = &ioat->base; struct ioat_ring_ent **ring; - u32 chanerr; int order; /* have we already been set up? */ @@ -477,12 +523,6 @@ int ioat2_alloc_chan_resources(struct dma_chan *c) /* Setup register to interrupt and write completion status on error */ writew(IOAT_CHANCTRL_RUN, chan->reg_base + IOAT_CHANCTRL_OFFSET); - chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); - if (chanerr) { - dev_err(to_dev(chan), "CHANERR = %x, clearing\n", chanerr); - writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET); - } - /* allocate a completion writeback area */ /* doing 2 32bit writes to mmio since 1 64b write doesn't work */ chan->completion = pci_pool_alloc(chan->device->completion_pool, @@ -746,13 +786,7 @@ void ioat2_free_chan_resources(struct dma_chan *c) tasklet_disable(&chan->cleanup_task); del_timer_sync(&chan->timer); device->cleanup_tasklet((unsigned long) ioat); - - /* Delay 100ms after reset to allow internal DMA logic to quiesce - * before removing DMA descriptor resources. - */ - writeb(IOAT_CHANCMD_RESET, - chan->reg_base + IOAT_CHANCMD_OFFSET(chan->device->version)); - mdelay(100); + device->reset_hw(chan); spin_lock_bh(&ioat->ring_lock); descs = ioat2_ring_space(ioat); @@ -839,6 +873,7 @@ int __devinit ioat2_dma_probe(struct ioatdma_device *device, int dca) int err; device->enumerate_channels = ioat2_enumerate_channels; + device->reset_hw = ioat2_reset_hw; device->cleanup_tasklet = ioat2_cleanup_tasklet; device->timer_fn = ioat2_timer_event; device->self_test = ioat_dma_self_test; diff --git a/drivers/dma/ioat/dma_v2.h b/drivers/dma/ioat/dma_v2.h index 1d849ef74d5f..3afad8da43cc 100644 --- a/drivers/dma/ioat/dma_v2.h +++ b/drivers/dma/ioat/dma_v2.h @@ -185,6 +185,8 @@ bool reshape_ring(struct ioat2_dma_chan *ioat, int order); void __ioat2_issue_pending(struct ioat2_dma_chan *ioat); void ioat2_cleanup_tasklet(unsigned long data); void ioat2_timer_event(unsigned long data); +int ioat2_quiesce(struct ioat_chan_common *chan, unsigned long tmo); +int ioat2_reset_sync(struct ioat_chan_common *chan, unsigned long tmo); extern struct kobj_type ioat2_ktype; extern struct kmem_cache *ioat2_cache; #endif /* IOATDMA_V2_H */ diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index e58ecb29513f..9908c9e94b2d 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -1130,6 +1130,45 @@ static int __devinit ioat3_dma_self_test(struct ioatdma_device *device) return 0; } +static int ioat3_reset_hw(struct ioat_chan_common *chan) +{ + /* throw away whatever the channel was doing and get it + * initialized, with ioat3 specific workarounds + */ + struct ioatdma_device *device = chan->device; + struct pci_dev *pdev = device->pdev; + u32 chanerr; + u16 dev_id; + int err; + + ioat2_quiesce(chan, msecs_to_jiffies(100)); + + chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET); + + /* -= IOAT ver.3 workarounds =- */ + /* Write CHANERRMSK_INT with 3E07h to mask out the errors + * that can cause stability issues for IOAT ver.3, and clear any + * pending errors + */ + pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07); + err = pci_read_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, &chanerr); + if (err) { + dev_err(&pdev->dev, "channel error register unreachable\n"); + return err; + } + pci_write_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, chanerr); + + /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit + * (workaround for spurious config parity error after restart) + */ + pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id); + if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0) + pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10); + + return ioat2_reset_sync(chan, msecs_to_jiffies(200)); +} + int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) { struct pci_dev *pdev = device->pdev; @@ -1139,10 +1178,10 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) struct ioat_chan_common *chan; bool is_raid_device = false; int err; - u16 dev_id; u32 cap; device->enumerate_channels = ioat2_enumerate_channels; + device->reset_hw = ioat3_reset_hw; device->self_test = ioat3_dma_self_test; dma = &device->common; dma->device_prep_dma_memcpy = ioat2_dma_prep_memcpy_lock; @@ -1218,19 +1257,6 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) dma->device_prep_dma_xor_val = NULL; #endif - /* -= IOAT ver.3 workarounds =- */ - /* Write CHANERRMSK_INT with 3E07h to mask out the errors - * that can cause stability issues for IOAT ver.3 - */ - pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07); - - /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit - * (workaround for spurious config parity error after restart) - */ - pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id); - if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0) - pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10); - err = ioat_probe(device); if (err) return err; diff --git a/drivers/dma/ioat/registers.h b/drivers/dma/ioat/registers.h index f015ec196700..e8ae63baf588 100644 --- a/drivers/dma/ioat/registers.h +++ b/drivers/dma/ioat/registers.h @@ -27,6 +27,7 @@ #define IOAT_PCI_DEVICE_ID_OFFSET 0x02 #define IOAT_PCI_DMAUNCERRSTS_OFFSET 0x148 +#define IOAT_PCI_CHANERR_INT_OFFSET 0x180 #define IOAT_PCI_CHANERRMASK_INT_OFFSET 0x184 /* MMIO Device Registers */ From 360b6e5cab1cea1d838b0100956ce0d3dbccbb6f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 18 Dec 2009 15:16:56 -0800 Subject: [PATCH 0052/1626] Documentation: Update mmiotrace.txt Fix typos, spellos, hyphenation, line lengths. BTW: are there some userspace tools? There is a reference to some at the wiki page, but there are no tools listed there. Signed-off-by: Randy Dunlap Acked-by: Pekka Paalanen LKML-Reference: <4B2C0D68.6080401@oracle.com> Signed-off-by: Ingo Molnar --- Documentation/trace/mmiotrace.txt | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/Documentation/trace/mmiotrace.txt b/Documentation/trace/mmiotrace.txt index 162effbfbdec..664e7386d89e 100644 --- a/Documentation/trace/mmiotrace.txt +++ b/Documentation/trace/mmiotrace.txt @@ -44,7 +44,8 @@ Check for lost events. Usage ----- -Make sure debugfs is mounted to /sys/kernel/debug. If not, (requires root privileges) +Make sure debugfs is mounted to /sys/kernel/debug. +If not (requires root privileges): $ mount -t debugfs debugfs /sys/kernel/debug Check that the driver you are about to trace is not loaded. @@ -91,7 +92,7 @@ $ dmesg > dmesg.txt $ tar zcf pciid-nick-mmiotrace.tar.gz mydump.txt lspci.txt dmesg.txt and then send the .tar.gz file. The trace compresses considerably. Replace "pciid" and "nick" with the PCI ID or model name of your piece of hardware -under investigation and your nick name. +under investigation and your nickname. How Mmiotrace Works @@ -100,7 +101,7 @@ How Mmiotrace Works Access to hardware IO-memory is gained by mapping addresses from PCI bus by calling one of the ioremap_*() functions. Mmiotrace is hooked into the __ioremap() function and gets called whenever a mapping is created. Mapping is -an event that is recorded into the trace log. Note, that ISA range mappings +an event that is recorded into the trace log. Note that ISA range mappings are not caught, since the mapping always exists and is returned directly. MMIO accesses are recorded via page faults. Just before __ioremap() returns, @@ -122,11 +123,11 @@ Trace Log Format ---------------- The raw log is text and easily filtered with e.g. grep and awk. One record is -one line in the log. A record starts with a keyword, followed by keyword -dependant arguments. Arguments are separated by a space, or continue until the +one line in the log. A record starts with a keyword, followed by keyword- +dependent arguments. Arguments are separated by a space, or continue until the end of line. The format for version 20070824 is as follows: -Explanation Keyword Space separated arguments +Explanation Keyword Space-separated arguments --------------------------------------------------------------------------- read event R width, timestamp, map id, physical, value, PC, PID @@ -136,7 +137,7 @@ iounmap event UNMAP timestamp, map id, PC, PID marker MARK timestamp, text version VERSION the string "20070824" info for reader LSPCI one line from lspci -v -PCI address map PCIDEV space separated /proc/bus/pci/devices data +PCI address map PCIDEV space-separated /proc/bus/pci/devices data unk. opcode UNKNOWN timestamp, map id, physical, data, PC, PID Timestamp is in seconds with decimals. Physical is a PCI bus address, virtual From b41df645c829d961068aecd30909c2675acbaaea Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 18 Dec 2009 15:17:04 -0800 Subject: [PATCH 0053/1626] Documentation: Update tracepoint-analysis.txt Fix grammar, spelling, punctuation, hyphenation, section numbering. Tell what PCL means. Signed-off-by: Randy Dunlap Cc: Mel Gorman Cc: Steven Rostedt LKML-Reference: <4B2C0D70.4030707@oracle.com> Signed-off-by: Ingo Molnar --- Documentation/trace/tracepoint-analysis.txt | 60 ++++++++++----------- 1 file changed, 30 insertions(+), 30 deletions(-) diff --git a/Documentation/trace/tracepoint-analysis.txt b/Documentation/trace/tracepoint-analysis.txt index 5eb4e487e667..87bee3c129ba 100644 --- a/Documentation/trace/tracepoint-analysis.txt +++ b/Documentation/trace/tracepoint-analysis.txt @@ -10,8 +10,8 @@ Tracepoints (see Documentation/trace/tracepoints.txt) can be used without creating custom kernel modules to register probe functions using the event tracing infrastructure. -Simplistically, tracepoints will represent an important event that when can -be taken in conjunction with other tracepoints to build a "Big Picture" of +Simplistically, tracepoints represent important events that can be +taken in conjunction with other tracepoints to build a "Big Picture" of what is going on within the system. There are a large number of methods for gathering and interpreting these events. Lacking any current Best Practises, this document describes some of the methods that can be used. @@ -33,12 +33,12 @@ calling will give a fair indication of the number of events available. -2.2 PCL +2.2 PCL (Performance Counters for Linux) ------- -Discovery and enumeration of all counters and events, including tracepoints +Discovery and enumeration of all counters and events, including tracepoints, are available with the perf tool. Getting a list of available events is a -simple case of +simple case of: $ perf list 2>&1 | grep Tracepoint ext4:ext4_free_inode [Tracepoint event] @@ -49,19 +49,19 @@ simple case of [ .... remaining output snipped .... ] -2. Enabling Events +3. Enabling Events ================== -2.1 System-Wide Event Enabling +3.1 System-Wide Event Enabling ------------------------------ See Documentation/trace/events.txt for a proper description on how events can be enabled system-wide. A short example of enabling all events related -to page allocation would look something like +to page allocation would look something like: $ for i in `find /sys/kernel/debug/tracing/events -name "enable" | grep mm_`; do echo 1 > $i; done -2.2 System-Wide Event Enabling with SystemTap +3.2 System-Wide Event Enabling with SystemTap --------------------------------------------- In SystemTap, tracepoints are accessible using the kernel.trace() function @@ -86,7 +86,7 @@ were allocating the pages. print_count() } -2.3 System-Wide Event Enabling with PCL +3.3 System-Wide Event Enabling with PCL --------------------------------------- By specifying the -a switch and analysing sleep, the system-wide events @@ -107,16 +107,16 @@ for a duration of time can be examined. Similarly, one could execute a shell and exit it as desired to get a report at that point. -2.4 Local Event Enabling +3.4 Local Event Enabling ------------------------ Documentation/trace/ftrace.txt describes how to enable events on a per-thread basis using set_ftrace_pid. -2.5 Local Event Enablement with PCL +3.5 Local Event Enablement with PCL ----------------------------------- -Events can be activate and tracked for the duration of a process on a local +Events can be activated and tracked for the duration of a process on a local basis using PCL such as follows. $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \ @@ -131,18 +131,18 @@ basis using PCL such as follows. 0.973913387 seconds time elapsed -3. Event Filtering +4. Event Filtering ================== Documentation/trace/ftrace.txt covers in-depth how to filter events in ftrace. Obviously using grep and awk of trace_pipe is an option as well as any script reading trace_pipe. -4. Analysing Event Variances with PCL +5. Analysing Event Variances with PCL ===================================== Any workload can exhibit variances between runs and it can be important -to know what the standard deviation in. By and large, this is left to the +to know what the standard deviation is. By and large, this is left to the performance analyst to do it by hand. In the event that the discrete event occurrences are useful to the performance analyst, then perf can be used. @@ -166,7 +166,7 @@ In the event that some higher-level event is required that depends on some aggregation of discrete events, then a script would need to be developed. Using --repeat, it is also possible to view how events are fluctuating over -time on a system wide basis using -a and sleep. +time on a system-wide basis using -a and sleep. $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \ -e kmem:mm_pagevec_free \ @@ -180,7 +180,7 @@ time on a system wide basis using -a and sleep. 1.002251757 seconds time elapsed ( +- 0.005% ) -5. Higher-Level Analysis with Helper Scripts +6. Higher-Level Analysis with Helper Scripts ============================================ When events are enabled the events that are triggering can be read from @@ -190,11 +190,11 @@ be gathered on-line as appropriate. Examples of post-processing might include o Reading information from /proc for the PID that triggered the event o Deriving a higher-level event from a series of lower-level events. - o Calculate latencies between two events + o Calculating latencies between two events Documentation/trace/postprocess/trace-pagealloc-postprocess.pl is an example script that can read trace_pipe from STDIN or a copy of a trace. When used -on-line, it can be interrupted once to generate a report without existing +on-line, it can be interrupted once to generate a report without exiting and twice to exit. Simplistically, the script just reads STDIN and counts up events but it @@ -212,12 +212,12 @@ also can do more such as processes, the parent process responsible for creating all the helpers can be identified -6. Lower-Level Analysis with PCL +7. Lower-Level Analysis with PCL ================================ -There may also be a requirement to identify what functions with a program +There may also be a requirement to identify what functions within a program were generating events within the kernel. To begin this sort of analysis, the -data must be recorded. At the time of writing, this required root +data must be recorded. At the time of writing, this required root: $ perf record -c 1 \ -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \ @@ -253,11 +253,11 @@ perf report. # (For more details, try: perf report --sort comm,dso,symbol) # -According to this, the vast majority of events occured triggered on events -within the VDSO. With simple binaries, this will often be the case so lets +According to this, the vast majority of events triggered on events +within the VDSO. With simple binaries, this will often be the case so let's take a slightly different example. In the course of writing this, it was -noticed that X was generating an insane amount of page allocations so lets look -at it +noticed that X was generating an insane amount of page allocations so let's look +at it: $ perf record -c 1 -f \ -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \ @@ -280,8 +280,8 @@ This was interrupted after a few seconds and # (For more details, try: perf report --sort comm,dso,symbol) # -So, almost half of the events are occuring in a library. To get an idea which -symbol. +So, almost half of the events are occurring in a library. To get an idea which +symbol: $ perf report --sort comm,dso,symbol # Samples: 27666 @@ -297,7 +297,7 @@ symbol. 0.01% Xorg /opt/gfx-test/lib/libpixman-1.so.0.13.1 [.] get_fast_path 0.00% Xorg [kernel] [k] ftrace_trace_userstack -To see where within the function pixmanFillsse2 things are going wrong +To see where within the function pixmanFillsse2 things are going wrong: $ perf annotate pixmanFillsse2 [ ... ] From 7e25f44cbf8d95a9748fdfd19c06145f19fd10e3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 18 Dec 2009 15:17:12 -0800 Subject: [PATCH 0054/1626] Documentation: Update ftrace-design.txt Correct grammos. Spell out words. Add missing words. Consistent use of "mcount()" function name. Signed-off-by: Randy Dunlap Acked-by: Steven Rostedt LKML-Reference: <4B2C0D78.6060707@oracle.com> Signed-off-by: Ingo Molnar --- Documentation/trace/ftrace-design.txt | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/trace/ftrace-design.txt b/Documentation/trace/ftrace-design.txt index 641a1ef2a7ff..239f14b2b55a 100644 --- a/Documentation/trace/ftrace-design.txt +++ b/Documentation/trace/ftrace-design.txt @@ -53,14 +53,14 @@ size of the mcount call that is embedded in the function). For example, if the function foo() calls bar(), when the bar() function calls mcount(), the arguments mcount() will pass to the tracer are: "frompc" - the address bar() will use to return to foo() - "selfpc" - the address bar() (with _mcount() size adjustment) + "selfpc" - the address bar() (with mcount() size adjustment) Also keep in mind that this mcount function will be called *a lot*, so optimizing for the default case of no tracer will help the smooth running of your system when tracing is disabled. So the start of the mcount function is -typically the bare min with checking things before returning. That also means -the code flow should usually kept linear (i.e. no branching in the nop case). -This is of course an optimization and not a hard requirement. +typically the bare minimum with checking things before returning. That also +means the code flow should usually be kept linear (i.e. no branching in the nop +case). This is of course an optimization and not a hard requirement. Here is some pseudo code that should help (these functions should actually be implemented in assembly): @@ -131,10 +131,10 @@ some functions to save (hijack) and restore the return address. The mcount function should check the function pointers ftrace_graph_return (compare to ftrace_stub) and ftrace_graph_entry (compare to -ftrace_graph_entry_stub). If either of those are not set to the relevant stub +ftrace_graph_entry_stub). If either of those is not set to the relevant stub function, call the arch-specific function ftrace_graph_caller which in turn calls the arch-specific function prepare_ftrace_return. Neither of these -function names are strictly required, but you should use them anyways to stay +function names is strictly required, but you should use them anyway to stay consistent across the architecture ports -- easier to compare & contrast things. @@ -144,7 +144,7 @@ but the first argument should be a pointer to the "frompc". Typically this is located on the stack. This allows the function to hijack the return address temporarily to have it point to the arch-specific function return_to_handler. That function will simply call the common ftrace_return_to_handler function and -that will return the original return address with which, you can return to the +that will return the original return address with which you can return to the original call site. Here is the updated mcount pseudo code: From f69ac2f5a36948e1adf071074414c5d1907b89b7 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 18 Dec 2009 16:31:34 -0500 Subject: [PATCH 0055/1626] nfsd: fix "insecure" export option A typo in 12045a6ee9908b "nfsd: let "insecure" flag vary by pseudoflavor" reversed the sense of the "insecure" flag. Reported-by: Michael Guntsche Signed-off-by: J. Bruce Fields --- fs/nfsd/nfsfh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfsd/nfsfh.c b/fs/nfsd/nfsfh.c index 1c12177b908c..55c8e63af0be 100644 --- a/fs/nfsd/nfsfh.c +++ b/fs/nfsd/nfsfh.c @@ -89,7 +89,7 @@ static __be32 nfsd_setuser_and_check_port(struct svc_rqst *rqstp, int flags = nfsexp_flags(rqstp, exp); /* Check if the request originated from a secure port. */ - if (!rqstp->rq_secure && (flags & NFSEXP_INSECURE_PORT)) { + if (!rqstp->rq_secure && !(flags & NFSEXP_INSECURE_PORT)) { RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]); dprintk(KERN_WARNING "nfsd: request from insecure port %s!\n", From 7d4e9d0962cd0f6a30b01e256756dd10606dab30 Mon Sep 17 00:00:00 2001 From: Emese Revfy Date: Mon, 14 Dec 2009 00:59:30 +0100 Subject: [PATCH 0056/1626] drbd: Constify struct file_operations Signed-off-by: Emese Revfy Signed-off-by: Philipp Reisner --- drivers/block/drbd/drbd_int.h | 2 +- drivers/block/drbd/drbd_main.c | 2 +- drivers/block/drbd/drbd_proc.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 2312d782fe99..c97558763430 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -1490,7 +1490,7 @@ void drbd_bump_write_ordering(struct drbd_conf *mdev, enum write_ordering_e wo); /* drbd_proc.c */ extern struct proc_dir_entry *drbd_proc; -extern struct file_operations drbd_proc_fops; +extern const struct file_operations drbd_proc_fops; extern const char *drbd_conn_str(enum drbd_conns s); extern const char *drbd_role_str(enum drbd_role s); diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 157d1e4343c2..af30ca97493c 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -151,7 +151,7 @@ wait_queue_head_t drbd_pp_wait; DEFINE_RATELIMIT_STATE(drbd_ratelimit_state, 5 * HZ, 5); -static struct block_device_operations drbd_ops = { +static const struct block_device_operations drbd_ops = { .owner = THIS_MODULE, .open = drbd_open, .release = drbd_release, diff --git a/drivers/block/drbd/drbd_proc.c b/drivers/block/drbd/drbd_proc.c index bdd0b4943b10..df8ad9660d8f 100644 --- a/drivers/block/drbd/drbd_proc.c +++ b/drivers/block/drbd/drbd_proc.c @@ -38,7 +38,7 @@ static int drbd_proc_open(struct inode *inode, struct file *file); struct proc_dir_entry *drbd_proc; -struct file_operations drbd_proc_fops = { +const struct file_operations drbd_proc_fops = { .owner = THIS_MODULE, .open = drbd_proc_open, .read = seq_read, From 49829ea74f790d3be2e803a617e714f5b9a5ed50 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 15 Dec 2009 22:55:44 +0100 Subject: [PATCH 0057/1626] drbd: Fix test of unsigned in _drbd_fault_random() rsp->count is unsigned so the test does not work. Signed-off-by: Roel Kluin Signed-off-by: Andrew Morton Signed-off-by: Philipp Reisner --- drivers/block/drbd/drbd_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index af30ca97493c..ecc1612df676 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -3623,7 +3623,7 @@ _drbd_fault_random(struct fault_random_state *rsp) { long refresh; - if (--rsp->count < 0) { + if (!rsp->count--) { get_random_bytes(&refresh, sizeof(refresh)); rsp->state += refresh; rsp->count = FAULT_RANDOM_REFRESH; From 7b886f4f7a051dc88165684cbcddd98e22bd0203 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Wed, 9 Dec 2009 21:09:12 +0800 Subject: [PATCH 0058/1626] drbd: remove duplicated #include Remove duplicated #include('s) in drivers/block/drbd/drbd_worker.c Signed-off-by: Huang Weiyi Signed-off-by: Philipp Reisner --- drivers/block/drbd/drbd_worker.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c index ed8796f1112d..3e8b6bc0ec2f 100644 --- a/drivers/block/drbd/drbd_worker.c +++ b/drivers/block/drbd/drbd_worker.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include From 820cd61a28503598f4262c544082ccb33678b9fc Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 13 Dec 2009 22:05:03 +0800 Subject: [PATCH 0059/1626] drbd: remove unused #include Remove unused #include ('s) in drivers/block/drbd/drbd_main.c drivers/block/drbd/drbd_receiver.c drivers/block/drbd/drbd_worker.c Signed-off-by: Huang Weiyi Signed-off-by: Philipp Reisner --- drivers/block/drbd/drbd_main.c | 1 - drivers/block/drbd/drbd_receiver.c | 1 - drivers/block/drbd/drbd_worker.c | 1 - 3 files changed, 3 deletions(-) diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index ecc1612df676..9348f33f6242 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -27,7 +27,6 @@ */ #include -#include #include #include #include diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index c548f24f54a1..259c1351b152 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -28,7 +28,6 @@ #include #include -#include #include #include #include diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c index 3e8b6bc0ec2f..b453c2bca3be 100644 --- a/drivers/block/drbd/drbd_worker.c +++ b/drivers/block/drbd/drbd_worker.c @@ -24,7 +24,6 @@ */ #include -#include #include #include #include From f797d9881b62c2ddb1d2e7bd80d87141949c84aa Mon Sep 17 00:00:00 2001 From: Shaun Ruffell Date: Thu, 17 Dec 2009 18:00:36 -0600 Subject: [PATCH 0060/1626] dma-debug: Do not add notifier when dma debugging is disabled. If CONFIG_HAVE_DMA_API_DEBUG is defined and "dma_debug=off" is specified on the kernel command line, when you detach a driver from a device you can cause the following NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] dma_debug_device_change+0x5d/0x117 The problem is that the dma_debug_device_change notifier function is added to the bus notifier chain even though the dma_entry_hash array was never initialized. If dma debugging is disabled, this patch both prevents dma_debug_device_change notifiers from being added to the chain, and additionally ensures that the dma_debug_device_change notifier function is a no-op. Cc: stable@kernel.org Signed-off-by: Shaun Ruffell Signed-off-by: Joerg Roedel --- lib/dma-debug.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/lib/dma-debug.c b/lib/dma-debug.c index d9b08e0f7f55..739974460c32 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -676,6 +676,8 @@ static int dma_debug_device_change(struct notifier_block *nb, struct device *dev = data; int count; + if (global_disable) + return; switch (action) { case BUS_NOTIFY_UNBOUND_DRIVER: @@ -697,6 +699,9 @@ void dma_debug_add_bus(struct bus_type *bus) { struct notifier_block *nb; + if (global_disable) + return; + nb = kzalloc(sizeof(struct notifier_block), GFP_KERNEL); if (nb == NULL) { pr_err("dma_debug_add_bus: out of memory\n"); From 0f764806438d5576ac58898332e5dcf30bb8a679 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Mon, 21 Dec 2009 15:51:23 +0100 Subject: [PATCH 0061/1626] x86/amd-iommu: Fix initialization failure panic The assumption that acpi_table_parse passes the return value of the hanlder function to the caller proved wrong recently. The return value of the handler function is totally ignored. This makes the initialization code for AMD IOMMU buggy in a way that could cause a kernel panic on initialization. This patch fixes the issue in the AMD IOMMU driver. Cc: stable@kernel.org Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu_init.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 1dca9c34eaeb..fb490ce7dd55 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -137,6 +137,11 @@ int amd_iommus_present; /* IOMMUs have a non-present cache? */ bool amd_iommu_np_cache __read_mostly; +/* + * Set to true if ACPI table parsing and hardware intialization went properly + */ +static bool amd_iommu_initialized; + /* * List of protection domains - used during resume */ @@ -929,6 +934,8 @@ static int __init init_iommu_all(struct acpi_table_header *table) } WARN_ON(p != end); + amd_iommu_initialized = true; + return 0; } @@ -1263,6 +1270,9 @@ static int __init amd_iommu_init(void) if (acpi_table_parse("IVRS", init_iommu_all) != 0) goto free; + if (!amd_iommu_initialized) + goto free; + if (acpi_table_parse("IVRS", init_memory_definitions) != 0) goto free; From 9504e0864b58b4a304820dcf3755f1da80d5e72f Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 21 Dec 2009 15:55:51 +0100 Subject: [PATCH 0062/1626] block: Fix topology stacking for data and discard alignment The stacking code incorrectly scaled up the data offset in some cases causing misaligned devices to report alignment. Rewrite the stacking algorithm to remedy this and apply the same alignment principles to the discard handling. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- block/blk-settings.c | 93 +++++++++++++++++++++++++------------------- 1 file changed, 53 insertions(+), 40 deletions(-) diff --git a/block/blk-settings.c b/block/blk-settings.c index 6ae118d6e193..e14fcbcedbfa 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -517,9 +517,8 @@ static unsigned int lcm(unsigned int a, unsigned int b) int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, sector_t offset) { - int ret; - - ret = 0; + sector_t alignment; + unsigned int top, bottom, granularity; t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors); t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors); @@ -537,6 +536,19 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, t->max_segment_size = min_not_zero(t->max_segment_size, b->max_segment_size); + granularity = max(b->physical_block_size, b->io_min); + alignment = b->alignment_offset - (offset & (granularity - 1)); + + if (t->alignment_offset != alignment) { + + top = max(t->physical_block_size, t->io_min) + + t->alignment_offset; + bottom = granularity + alignment; + + if (max(top, bottom) & (min(top, bottom) - 1)) + t->misaligned = 1; + } + t->logical_block_size = max(t->logical_block_size, b->logical_block_size); @@ -544,54 +556,55 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, b->physical_block_size); t->io_min = max(t->io_min, b->io_min); + t->io_opt = lcm(t->io_opt, b->io_opt); + t->no_cluster |= b->no_cluster; t->discard_zeroes_data &= b->discard_zeroes_data; - /* Bottom device offset aligned? */ - if (offset && - (offset & (b->physical_block_size - 1)) != b->alignment_offset) { + if (t->physical_block_size & (t->logical_block_size - 1)) { + t->physical_block_size = t->logical_block_size; t->misaligned = 1; - ret = -1; } - /* - * Temporarily disable discard granularity. It's currently buggy - * since we default to 0 for discard_granularity, hence this - * "failure" will always trigger for non-zero offsets. - */ -#if 0 - if (offset && - (offset & (b->discard_granularity - 1)) != b->discard_alignment) { - t->discard_misaligned = 1; - ret = -1; - } -#endif - - /* If top has no alignment offset, inherit from bottom */ - if (!t->alignment_offset) - t->alignment_offset = - b->alignment_offset & (b->physical_block_size - 1); - - if (!t->discard_alignment) - t->discard_alignment = - b->discard_alignment & (b->discard_granularity - 1); - - /* Top device aligned on logical block boundary? */ - if (t->alignment_offset & (t->logical_block_size - 1)) { + if (t->io_min & (t->physical_block_size - 1)) { + t->io_min = t->physical_block_size; t->misaligned = 1; - ret = -1; } - /* Find lcm() of optimal I/O size and granularity */ - t->io_opt = lcm(t->io_opt, b->io_opt); - t->discard_granularity = lcm(t->discard_granularity, - b->discard_granularity); + if (t->io_opt & (t->physical_block_size - 1)) { + t->io_opt = 0; + t->misaligned = 1; + } - /* Verify that optimal I/O size is a multiple of io_min */ - if (t->io_min && t->io_opt % t->io_min) - ret = -1; + t->alignment_offset = lcm(t->alignment_offset, alignment) + & (max(t->physical_block_size, t->io_min) - 1); - return ret; + if (t->alignment_offset & (t->logical_block_size - 1)) + t->misaligned = 1; + + /* Discard alignment and granularity */ + if (b->discard_granularity) { + + alignment = b->discard_alignment - + (offset & (b->discard_granularity - 1)); + + if (t->discard_granularity != 0 && + t->discard_alignment != alignment) { + top = t->discard_granularity + t->discard_alignment; + bottom = b->discard_granularity + alignment; + + /* Verify that top and bottom intervals line up */ + if (max(top, bottom) & (min(top, bottom) - 1)) + t->discard_misaligned = 1; + } + + t->discard_granularity = max(t->discard_granularity, + b->discard_granularity); + t->discard_alignment = lcm(t->discard_alignment, alignment) & + (t->discard_granularity - 1); + } + + return t->misaligned ? -1 : 0; } EXPORT_SYMBOL(blk_stack_limits); From 64a76b504b04b5da16d1e7658a95dd126594e02f Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Thu, 10 Dec 2009 14:37:21 -0800 Subject: [PATCH 0063/1626] iwlwifi: allocated rx page accounting cleanup In iwlwifi, priv->alloc_rxb_page is used to keep track of the Rx pages allocated by the driver. This cleans up the page free routines by introducing __iwl_free_pages/iwl_free_pages so that the accounting is more accurate and less error prone. This also fixes two instances where the counter was not updated. Signed-off-by: Zhu Yi Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945.c | 3 +-- drivers/net/wireless/iwlwifi/iwl-dev.h | 11 +++++++++++ drivers/net/wireless/iwlwifi/iwl-hcmd.c | 2 +- drivers/net/wireless/iwlwifi/iwl-rx.c | 8 ++------ drivers/net/wireless/iwlwifi/iwl-scan.c | 3 +-- drivers/net/wireless/iwlwifi/iwl-sta.c | 8 ++------ drivers/net/wireless/iwlwifi/iwl3945-base.c | 10 +++------- 7 files changed, 21 insertions(+), 24 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 7da1dab933d9..4609323d8436 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -1835,8 +1835,7 @@ static int iwl3945_send_rxon_assoc(struct iwl_priv *priv) rc = -EIO; } - priv->alloc_rxb_page--; - free_pages(cmd.reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd.reply_page); return rc; } diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 2673e9a4db92..e1032f2bdc75 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -1353,4 +1353,15 @@ static inline int is_channel_ibss(const struct iwl_channel_info *ch) return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0; } +static inline void __iwl_free_pages(struct iwl_priv *priv, struct page *page) +{ + __free_pages(page, priv->hw_params.rx_page_order); + priv->alloc_rxb_page--; +} + +static inline void iwl_free_pages(struct iwl_priv *priv, unsigned long page) +{ + free_pages(page, priv->hw_params.rx_page_order); + priv->alloc_rxb_page--; +} #endif /* __iwl_dev_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index a23165948202..30e9ea6d54ec 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -234,7 +234,7 @@ cancel: } fail: if (cmd->reply_page) { - free_pages(cmd->reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd->reply_page); cmd->reply_page = 0; } out: diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index 6090bc15a6d5..f5c87e72660a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -345,10 +345,8 @@ void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, PAGE_SIZE << priv->hw_params.rx_page_order, PCI_DMA_FROMDEVICE); - __free_pages(rxq->pool[i].page, - priv->hw_params.rx_page_order); + __iwl_free_pages(priv, rxq->pool[i].page); rxq->pool[i].page = NULL; - priv->alloc_rxb_page--; } } @@ -416,9 +414,7 @@ void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, PAGE_SIZE << priv->hw_params.rx_page_order, PCI_DMA_FROMDEVICE); - priv->alloc_rxb_page--; - __free_pages(rxq->pool[i].page, - priv->hw_params.rx_page_order); + __iwl_free_pages(priv, rxq->pool[i].page); rxq->pool[i].page = NULL; } list_add_tail(&rxq->pool[i].list, &rxq->rx_used); diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index a2b2b8315ff9..fa1c89ba6459 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -144,8 +144,7 @@ static int iwl_send_scan_abort(struct iwl_priv *priv) clear_bit(STATUS_SCAN_HW, &priv->status); } - priv->alloc_rxb_page--; - free_pages(cmd.reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd.reply_page); return ret; } diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index cd6a6901216e..cde09a890b73 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -164,9 +164,7 @@ int iwl_send_add_sta(struct iwl_priv *priv, break; } } - - priv->alloc_rxb_page--; - free_pages(cmd.reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd.reply_page); return ret; } @@ -391,9 +389,7 @@ static int iwl_send_remove_station(struct iwl_priv *priv, const u8 *addr, break; } } - - priv->alloc_rxb_page--; - free_pages(cmd.reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd.reply_page); return ret; } diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 2a28a1f8b1fe..994db4a2e1c4 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -812,7 +812,7 @@ static int iwl3945_get_measurement(struct iwl_priv *priv, break; } - free_pages(cmd.reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd.reply_page); return rc; } @@ -1198,9 +1198,7 @@ void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, PAGE_SIZE << priv->hw_params.rx_page_order, PCI_DMA_FROMDEVICE); - priv->alloc_rxb_page--; - __free_pages(rxq->pool[i].page, - priv->hw_params.rx_page_order); + __iwl_free_pages(priv, rxq->pool[i].page); rxq->pool[i].page = NULL; } list_add_tail(&rxq->pool[i].list, &rxq->rx_used); @@ -1247,10 +1245,8 @@ static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rx pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, PAGE_SIZE << priv->hw_params.rx_page_order, PCI_DMA_FROMDEVICE); - __free_pages(rxq->pool[i].page, - priv->hw_params.rx_page_order); + __iwl_free_pages(priv, rxq->pool[i].page); rxq->pool[i].page = NULL; - priv->alloc_rxb_page--; } } From f8701fe3aec24fcfb0dfa19aab47904611f96daf Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Thu, 10 Dec 2009 14:37:22 -0800 Subject: [PATCH 0064/1626] iwlwifi: power up all devices for EEPROM read Recent commits "iwlwifi: remove power-wasting calls to apm_ops.init()" and "iwlagn: power up device before initializing EEPROM" had the goal of reducing device power consumption from the time the module is loaded until the interface is brought up and the device's power saving mechanisms kick in. The idea is that once the module is loaded there is no need for the device to consume power until the interface is brought up. With the current solution the device is only powered up during EEPROM read, and then so also only if the EEPROM type is OTP. We have found that on certain platforms even non-OTP devices require power to be up during EEPROM read. On these platforms the driver never loads and the system log contains the following: iwlagn 0000:03:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x080403D8 We thus now power up all devices during EEPROM read. Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-csr.h | 8 +++----- drivers/net/wireless/iwlwifi/iwl-eeprom.c | 14 +++----------- 2 files changed, 6 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index a7bfae01f19b..1ec8cb4d5eae 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -77,8 +77,7 @@ * The MAC (uCode processor, etc.) does not need to be powered up for accessing * the CSR registers. * - * NOTE: Newer devices using one-time-programmable (OTP) memory - * require device to be awake in order to read this memory + * NOTE: Device does need to be awake in order to read this memory * via CSR_EEPROM and CSR_OTP registers */ #define CSR_BASE (0x000) @@ -111,9 +110,8 @@ /* * EEPROM and OTP (one-time-programmable) memory reads * - * NOTE: For (newer) devices using OTP, device must be awake, initialized via - * apm_ops.init() in order to read. Older devices (3945/4965/5000) - * use EEPROM and do not require this. + * NOTE: Device must be awake, initialized via apm_ops.init(), + * in order to read. */ #define CSR_EEPROM_REG (CSR_BASE+0x02c) #define CSR_EEPROM_GP (CSR_BASE+0x030) diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index 3946e5c03f81..72f0d77955cf 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -518,10 +518,7 @@ int iwl_eeprom_init(struct iwl_priv *priv) } e = (u16 *)priv->eeprom; - if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP) { - /* OTP reads require powered-up chip */ - priv->cfg->ops->lib->apm_ops.init(priv); - } + priv->cfg->ops->lib->apm_ops.init(priv); ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv); if (ret < 0) { @@ -570,13 +567,6 @@ int iwl_eeprom_init(struct iwl_priv *priv) e[cache_addr / 2] = eeprom_data; cache_addr += sizeof(u16); } - - /* - * Now that OTP reads are complete, reset chip to save - * power until we load uCode during "up". - */ - priv->cfg->ops->lib->apm_ops.stop(priv); - } else { /* eeprom is an array of 16bit values */ for (addr = 0; addr < sz; addr += sizeof(u16)) { @@ -603,6 +593,8 @@ done: err: if (ret) iwl_eeprom_free(priv); + /* Reset chip to save power until we load uCode during "up". */ + priv->cfg->ops->lib->apm_ops.stop(priv); alloc_err: return ret; } From 521d9bce86331d8261213b807a9127f7e2ec046b Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Thu, 10 Dec 2009 14:37:23 -0800 Subject: [PATCH 0065/1626] iwlwifi: fix syslog message for event log dump size When trigger event log dumping from debugfs, the entire event log should be dumped and the size should match the number of events being dump. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 2 +- drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index b8377efb3ba7..715db219f905 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1842,7 +1842,7 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log) } #ifdef CONFIG_IWLWIFI_DEBUG - if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS)) + if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log) size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES) ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size; #else diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 994db4a2e1c4..4c0e47586896 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1684,7 +1684,7 @@ void iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log) } #ifdef CONFIG_IWLWIFI_DEBUG - if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS)) + if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log) size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES) ? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size; #else From 4d91f9f3730d6d82a3ba67cae215a1823ba6a191 Mon Sep 17 00:00:00 2001 From: Benoit Papillault Date: Sat, 12 Dec 2009 00:22:35 +0100 Subject: [PATCH 0066/1626] ath9k: Last fix for TX software padding. First, we copy/paste the padding stuff from ath9k_tx to ath_tx_cabq since it needs to same kind of padding, but for internally generated beacons. Next, software padding done on TX needs to be removed before calling ieee80211_tx_status. The code was already there in ath_tx_complete but it was wrong. Fix it by using ath9k_cmn_padpos. This later code has been tested by sending packets to a monitor interface and reading packets from the same interface. Signed-off-by: Benoit PAPILLAULT Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 2a11cc57ceea..67706205699b 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1780,7 +1780,8 @@ void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb) struct ath_wiphy *aphy = hw->priv; struct ath_softc *sc = aphy->sc; struct ath_common *common = ath9k_hw_common(sc->sc_ah); - int hdrlen, padsize; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + int padpos, padsize; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ath_tx_control txctl; @@ -1792,7 +1793,6 @@ void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb) * BSSes. */ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) sc->tx.seq_no += 0x10; hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); @@ -1800,9 +1800,9 @@ void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb) } /* Add the padding after the header if this is not already done */ - hdrlen = ieee80211_get_hdrlen_from_skb(skb); - if (hdrlen & 3) { - padsize = hdrlen % 4; + padpos = ath9k_cmn_padpos(hdr->frame_control); + padsize = padpos & 3; + if (padsize && skb->len>padpos) { if (skb_headroom(skb) < padsize) { ath_print(common, ATH_DBG_XMIT, "TX CABQ padding failed\n"); @@ -1810,7 +1810,7 @@ void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb) return; } skb_push(skb, padsize); - memmove(skb->data, skb->data + padsize, hdrlen); + memmove(skb->data, skb->data + padsize, padpos); } txctl.txq = sc->beacon.cabq; @@ -1838,7 +1838,8 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, struct ieee80211_hw *hw = sc->hw; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ath_common *common = ath9k_hw_common(sc->sc_ah); - int hdrlen, padsize; + struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data; + int padpos, padsize; ath_print(common, ATH_DBG_XMIT, "TX complete: skb: %p\n", skb); @@ -1853,14 +1854,14 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, tx_info->flags |= IEEE80211_TX_STAT_ACK; } - hdrlen = ieee80211_get_hdrlen_from_skb(skb); - padsize = hdrlen & 3; - if (padsize && hdrlen >= 24) { + padpos = ath9k_cmn_padpos(hdr->frame_control); + padsize = padpos & 3; + if (padsize && skb->len>padpos+padsize) { /* * Remove MAC header padding before giving the frame back to * mac80211. */ - memmove(skb->data + padsize, skb->data, hdrlen); + memmove(skb->data + padsize, skb->data, padpos); skb_pull(skb, padsize); } From 855da5e07ef4dba5f23d8f6f31004116ba16c52a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 13 Dec 2009 17:07:45 +0100 Subject: [PATCH 0067/1626] drivers/net/wireless: Correct code taking the size of a pointer sizeof(iv16) and sizeof(iv32) are the sizes of pointers. Change them to the size of the copied data. Furthermore, iveiv_entry is a local structure that has just been initialized and is not visible outside this function. Thus, there would seem to be no point to copy data into it. The order of the arguments is thus changed to copy the data into the parameters, which are provided as pointers, suggesting in this case that they should be used to return values. A simplified version of the semantic patch that finds the first problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression *x; expression f; type T; @@ *f(...,(T)x,...) // Signed-off-by: Julia Lawall Acked-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 6e13650cb5da..a199f85e155c 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2140,8 +2140,8 @@ static void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, rt2800_register_multiread(rt2x00dev, offset, &iveiv_entry, sizeof(iveiv_entry)); - memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16)); - memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32)); + memcpy(iv16, &iveiv_entry.iv[0], sizeof(*iv16)); + memcpy(iv32, &iveiv_entry.iv[4], sizeof(*iv32)); } static int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value) From 93b6bd26b74efe46b4579592560f9f1cb7b61994 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 14 Dec 2009 20:33:55 +0100 Subject: [PATCH 0068/1626] rt2x00: Disable powersaving for rt61pci and rt2800pci. We've had many reports of rt61pci failures with powersaving enabled. Therefore, as a stop-gap measure, disable powersaving of the rt61pci until we have found a proper solution. Also disable powersaving on rt2800pci as it most probably will show the same problem. Cc: stable@kernel.org Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 6 ++++++ drivers/net/wireless/rt2x00/rt61pci.c | 5 +++++ 2 files changed, 11 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index a199f85e155c..6bf6c0f12f35 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2021,6 +2021,12 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) unsigned int i; u16 eeprom; + /* + * Disable powersaving as default on PCI devices. + */ + if (rt2x00_intf_is_pci(rt2x00dev)) + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + /* * Initialize all hw fields. */ diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 687e17dc2e9f..0ca589306d71 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2538,6 +2538,11 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) char *tx_power; unsigned int i; + /* + * Disable powersaving as default. + */ + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + /* * Initialize all hw fields. */ From af6b8ee38833b39f70946f767740565ceb126961 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 14 Dec 2009 14:12:08 -0800 Subject: [PATCH 0069/1626] iwlwifi: fix EEPROM/OTP reading endian annotations and a bug The construct "le16_to_cpu((__force __le16)(r >> 16))" has always bothered me when looking through the iwlwifi code, it shouldn't be necessary to __force anything, and before this code, "r" was obtained with an ioread32, which swaps each of the two u16 values in it properly when swapping the entire u32 value. I've had arguments about this code with people before, but always conceded they were right because removing it only made things not work at all on big endian platforms. However, analysing a failure of the OTP reading code, I now finally figured out what is going on, and why my intuition about that code being wrong was right all along. It turns out that the 'priv->eeprom' u8 array really wants to have the data in it in little endian. So the force code above and all really converts *to* little endian, not from it. Cf., for instance, the function iwl_eeprom_query16() -- it reads two u8 values and combines them into a u16, in a little-endian way. And considering it more, it makes sense to have the eeprom array as on the device, after all not all values really are 16-bit values, the MAC address for instance is not. Now, what this really means is that all the annotations are completely wrong. The eeprom reading code should fill the priv->eeprom array as a __le16 array, with __le16 values. This also means that iwl_read_otp_word() should really have a __le16 pointer as the data argument, since it should be filling that in a format suitable for priv->eeprom. Propagating these changes throughout, iwl_find_otp_image() is found to be, now obviously visible, defective -- it uses the data returned by iwl_read_otp_word() directly as if it was CPU endianness. Fixing that, which is this hunk of the patch: - next_link_addr = link_value * sizeof(u16); + next_link_addr = le16_to_cpu(link_value) * sizeof(u16); is the only real change of this patch. Everything else is just fixing the sparse annotations. Also, the bug only shows up on big endian platforms with a 1000 series card. 5000 and previous series do not use OTP, and 6000 series has shadow RAM support which means we don't ever use the defective code on any cards but 1000. Signed-off-by: Johannes Berg Cc: stable@kernel.org Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-dev.h | 2 +- drivers/net/wireless/iwlwifi/iwl-eeprom.c | 20 +++++++++++--------- 2 files changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index e1032f2bdc75..165d1f6e2dd9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -1168,7 +1168,7 @@ struct iwl_priv { u32 last_beacon_time; u64 last_tsf; - /* eeprom */ + /* eeprom -- this is in the card's little endian byte order */ u8 *eeprom; int nvm_device_type; struct iwl_eeprom_calib_info *calib_info; diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index 72f0d77955cf..08ad6e41a1cc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -370,7 +370,7 @@ static int iwl_init_otp_access(struct iwl_priv *priv) return ret; } -static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, u16 *eeprom_data) +static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, __le16 *eeprom_data) { int ret = 0; u32 r; @@ -404,7 +404,7 @@ static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, u16 *eeprom_data) CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK); IWL_ERR(priv, "Correctable OTP ECC error, continue read\n"); } - *eeprom_data = le16_to_cpu((__force __le16)(r >> 16)); + *eeprom_data = cpu_to_le16(r >> 16); return 0; } @@ -413,7 +413,8 @@ static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, u16 *eeprom_data) */ static bool iwl_is_otp_empty(struct iwl_priv *priv) { - u16 next_link_addr = 0, link_value; + u16 next_link_addr = 0; + __le16 link_value; bool is_empty = false; /* locate the beginning of OTP link list */ @@ -443,7 +444,8 @@ static bool iwl_is_otp_empty(struct iwl_priv *priv) static int iwl_find_otp_image(struct iwl_priv *priv, u16 *validblockaddr) { - u16 next_link_addr = 0, link_value = 0, valid_addr; + u16 next_link_addr = 0, valid_addr; + __le16 link_value = 0; int usedblocks = 0; /* set addressing mode to absolute to traverse the link list */ @@ -463,7 +465,7 @@ static int iwl_find_otp_image(struct iwl_priv *priv, * check for more block on the link list */ valid_addr = next_link_addr; - next_link_addr = link_value * sizeof(u16); + next_link_addr = le16_to_cpu(link_value) * sizeof(u16); IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n", usedblocks, next_link_addr); if (iwl_read_otp_word(priv, next_link_addr, &link_value)) @@ -497,7 +499,7 @@ static int iwl_find_otp_image(struct iwl_priv *priv, */ int iwl_eeprom_init(struct iwl_priv *priv) { - u16 *e; + __le16 *e; u32 gp = iwl_read32(priv, CSR_EEPROM_GP); int sz; int ret; @@ -516,7 +518,7 @@ int iwl_eeprom_init(struct iwl_priv *priv) ret = -ENOMEM; goto alloc_err; } - e = (u16 *)priv->eeprom; + e = (__le16 *)priv->eeprom; priv->cfg->ops->lib->apm_ops.init(priv); @@ -559,7 +561,7 @@ int iwl_eeprom_init(struct iwl_priv *priv) } for (addr = validblockaddr; addr < validblockaddr + sz; addr += sizeof(u16)) { - u16 eeprom_data; + __le16 eeprom_data; ret = iwl_read_otp_word(priv, addr, &eeprom_data); if (ret) @@ -584,7 +586,7 @@ int iwl_eeprom_init(struct iwl_priv *priv) goto done; } r = _iwl_read_direct32(priv, CSR_EEPROM_REG); - e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16)); + e[addr / 2] = cpu_to_le16(r >> 16); } } ret = 0; From b7bb1756cb6a610cdbac8cfdad9e79bb5670b63b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 14 Dec 2009 14:12:09 -0800 Subject: [PATCH 0070/1626] iwlwifi: fix more eeprom endian bugs I've also for a long time had a problem with the temperature calculation code, which I had fixed by byte-swapping the values, and now it turns out that was the correct fix after all. Also, any use of iwl_eeprom_query_addr() that is for more than a u8 must be cast to little endian, and some structs as well. Fix all this. Again, no real impact on platforms that already are little endian. Signed-off-by: Johannes Berg Cc: stable@kernel.org Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +- drivers/net/wireless/iwlwifi/iwl-5000-hw.h | 14 +++++++++----- drivers/net/wireless/iwlwifi/iwl-5000.c | 7 ++++--- drivers/net/wireless/iwlwifi/iwl-eeprom.h | 4 ++-- 4 files changed, 16 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 386513b601f5..484c5fdf7c2a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -1204,7 +1204,7 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info); /* calculate tx gain adjustment based on power supply voltage */ - voltage = priv->calib_info->voltage; + voltage = le16_to_cpu(priv->calib_info->voltage); init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage); voltage_compensation = iwl4965_get_voltage_compensation(voltage, init_voltage); diff --git a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h index 4ef6804a455a..bc056e9ab85f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h @@ -92,11 +92,15 @@ static inline s32 iwl_temp_calib_to_offset(struct iwl_priv *priv) { - u16 *temp_calib = (u16 *)iwl_eeprom_query_addr(priv, - EEPROM_5000_TEMPERATURE); - /* offset = temperature - voltage / coef */ - s32 offset = (s32)(temp_calib[0] - temp_calib[1] / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF); - return offset; + u16 temperature, voltage; + __le16 *temp_calib = + (__le16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_TEMPERATURE); + + temperature = le16_to_cpu(temp_calib[0]); + voltage = le16_to_cpu(temp_calib[1]); + + /* offset = temp - volt / coeff */ + return (s32)(temperature - voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF); } /* Fixed (non-configurable) rx data from phy */ diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index e2f8615c8c9b..33a5866538e7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -333,14 +333,15 @@ static void iwl5000_set_ct_threshold(struct iwl_priv *priv) static int iwl5000_set_Xtal_calib(struct iwl_priv *priv) { struct iwl_calib_xtal_freq_cmd cmd; - u16 *xtal_calib = (u16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_XTAL); + __le16 *xtal_calib = + (__le16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_XTAL); cmd.hdr.op_code = IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD; cmd.hdr.first_group = 0; cmd.hdr.groups_num = 1; cmd.hdr.data_valid = 1; - cmd.cap_pin1 = (u8)xtal_calib[0]; - cmd.cap_pin2 = (u8)xtal_calib[1]; + cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]); + cmd.cap_pin2 = le16_to_cpu(xtal_calib[1]); return iwl_calib_set(&priv->calib_results[IWL_CALIB_XTAL], (u8 *)&cmd, sizeof(cmd)); } diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h index 5cd2b66bbe45..0cd9c02ee044 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h @@ -137,7 +137,7 @@ struct iwl_eeprom_channel { * */ struct iwl_eeprom_enhanced_txpwr { - u16 common; + __le16 common; s8 chain_a_max; s8 chain_b_max; s8 chain_c_max; @@ -360,7 +360,7 @@ struct iwl_eeprom_calib_subband_info { struct iwl_eeprom_calib_info { u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */ u8 saturation_power52; /* half-dBm */ - s16 voltage; /* signed */ + __le16 voltage; /* signed */ struct iwl_eeprom_calib_subband_info band_info[EEPROM_TX_POWER_BANDS]; } __attribute__ ((packed)); From bc45a67079c916a9bd0a95b0b879cc0f259bac6e Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Mon, 14 Dec 2009 14:12:10 -0800 Subject: [PATCH 0071/1626] iwl3945: disable power save we see from http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2125 that power saving does not work well on 3945. Since then power saving has also been connected with association problems where an AP deathenticates a 3945 after it is unable to transmit data to it - this happens when 3945 enters power savings mode. Disable power save support until issues are resolved. Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945.c | 2 ++ drivers/net/wireless/iwlwifi/iwl3945-base.c | 8 +++++--- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 4609323d8436..e413bd35bc41 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -2835,6 +2835,7 @@ static struct iwl_cfg iwl3945_bg_cfg = { .use_isr_legacy = true, .ht_greenfield_support = false, .led_compensation = 64, + .broken_powersave = true, }; static struct iwl_cfg iwl3945_abg_cfg = { @@ -2851,6 +2852,7 @@ static struct iwl_cfg iwl3945_abg_cfg = { .use_isr_legacy = true, .ht_greenfield_support = false, .led_compensation = 64, + .broken_powersave = true, }; struct pci_device_id iwl3945_hw_card_ids[] = { diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 4c0e47586896..c322d6c13182 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -3932,9 +3932,11 @@ static int iwl3945_setup_mac(struct iwl_priv *priv) /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM | - IEEE80211_HW_SPECTRUM_MGMT | - IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_SUPPORTS_DYNAMIC_PS; + IEEE80211_HW_SPECTRUM_MGMT; + + if (!priv->cfg->broken_powersave) + hw->flags |= IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_SUPPORTS_DYNAMIC_PS; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | From 731a29b74aa823e09a6547befce3f721bef32f86 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Mon, 14 Dec 2009 14:12:11 -0800 Subject: [PATCH 0072/1626] iwlwifi: initialize spinlock before use Recent powersaving work resulted in power management ops being called during EEPROM initialization. The lock used by these functions is not initialized at this time. Ensure lock is initialized before it is used. Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 4 ++-- drivers/net/wireless/iwlwifi/iwl3945-base.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 715db219f905..1c9866daf815 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3173,7 +3173,6 @@ static int iwl_init_drv(struct iwl_priv *priv) priv->ibss_beacon = NULL; - spin_lock_init(&priv->lock); spin_lock_init(&priv->sta_lock); spin_lock_init(&priv->hcmd_lock); @@ -3361,10 +3360,11 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) (unsigned long long) pci_resource_len(pdev, 0)); IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base); - /* this spin lock will be used in apm_ops.init and EEPROM access + /* these spin locks will be used in apm_ops.init and EEPROM access * we should init now */ spin_lock_init(&priv->reg_lock); + spin_lock_init(&priv->lock); iwl_hw_detect(priv); IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s REV=0x%X\n", priv->cfg->name, priv->hw_rev); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index c322d6c13182..96b23f4571cb 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -3863,7 +3863,6 @@ static int iwl3945_init_drv(struct iwl_priv *priv) priv->retry_rate = 1; priv->ibss_beacon = NULL; - spin_lock_init(&priv->lock); spin_lock_init(&priv->sta_lock); spin_lock_init(&priv->hcmd_lock); @@ -4055,10 +4054,11 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e * PCI Tx retries from interfering with C3 CPU state */ pci_write_config_byte(pdev, 0x41, 0x00); - /* this spin lock will be used in apm_ops.init and EEPROM access + /* these spin locks will be used in apm_ops.init and EEPROM access * we should init now */ spin_lock_init(&priv->reg_lock); + spin_lock_init(&priv->lock); /*********************** * 4. Read EEPROM From dc57a303faab8562b92e85df0d79c4a05d7e2a61 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Mon, 14 Dec 2009 14:12:12 -0800 Subject: [PATCH 0073/1626] iwl3945: fix panic in iwl3945 driver 3945 updated write_ptr without regard to read_ptr on the Tx path. This messes up our TFD on high load and result in the following: <1>[ 7290.414172] IP: [] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.414205] PGD 0 <1>[ 7290.414214] Thread overran stack, or stack corrupted <0>[ 7290.414229] Oops: 0002 [#1] PREEMPT SMP <0>[ 7290.414246] last sysfs file: /sys/devices/platform/coretemp.1/temp1_input <4>[ 7290.414265] CPU 0 <4>[ 7290.414274] Modules linked in: af_packet nfsd usb_storage usb_libusual cpufreq_powersave exportfs cpufreq_conservative iwl3945 nfs cpufreq_userspace snd_hda_codec_realtek acpi_cpufreq uvcvideo lockd iwlcore snd_hda_intel joydev coretemp nfs_acl videodev snd_hda_codec mac80211 v4l1_compat snd_hwdep sbp2 v4l2_compat_ioctl32 uhci_hcd psmouse auth_rpcgss ohci1394 cfg80211 ehci_hcd video ieee1394 snd_pcm serio_raw battery ac nvidia(P) usbcore output sunrpc evdev lirc_ene0100 snd_page_alloc rfkill tg3 libphy fuse lzo lzo_decompress lzo_compress <6>[ 7290.414486] Pid: 0, comm: swapper Tainted: P 2.6.32-rc8-wl #213 Aspire 5720 <6>[ 7290.414507] RIP: 0010:[] [] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <6>[ 7290.414541] RSP: 0018:ffff880002203d60 EFLAGS: 00010246 <6>[ 7290.414557] RAX: 000000000000004f RBX: ffff880064c11600 RCX: 0000000000000013 <6>[ 7290.414576] RDX: ffffffffa0ddcf20 RSI: ffff8800512b7008 RDI: 0000000000000038 <6>[ 7290.414596] RBP: ffff880002203dd0 R08: 0000000000000000 R09: 0000000000000100 <6>[ 7290.414616] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000a0 <6>[ 7290.414635] R13: 0000000000000002 R14: 0000000000000013 R15: 0000000000020201 <6>[ 7290.414655] FS: 0000000000000000(0000) GS:ffff880002200000(0000) knlGS:0000000000000000 <6>[ 7290.414677] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <6>[ 7290.414693] CR2: 0000000000000041 CR3: 0000000001001000 CR4: 00000000000006f0 <6>[ 7290.414712] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <6>[ 7290.414732] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>[ 7290.414752] Process swapper (pid: 0, threadinfo ffffffff81524000, task ffffffff81528b60) <0>[ 7290.414772] Stack: <4>[ 7290.414780] ffff880002203da0 0000000000000046 0000000000000000 0000000000000046 <4>[ 7290.414804] <0> 0000000000000282 0000000000000282 0000000000000282 ffff880064c12010 <4>[ 7290.414830] <0> ffff880002203db0 ffff880064c11600 ffff880064c12e50 ffff8800512b7000 <0>[ 7290.414858] Call Trace: <0>[ 7290.414867] <4>[ 7290.414884] [] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945] <4>[ 7290.414910] [] ? _spin_unlock+0x30/0x60 <4>[ 7290.414931] [] tasklet_action+0x101/0x110 <4>[ 7290.414950] [] __do_softirq+0xc0/0x160 <4>[ 7290.414968] [] call_softirq+0x1c/0x30 <4>[ 7290.414986] [] do_softirq+0x75/0xb0 <4>[ 7290.415003] [] irq_exit+0x95/0xa0 <4>[ 7290.415020] [] do_IRQ+0x77/0xf0 <4>[ 7290.415038] [] ret_from_intr+0x0/0xf <0>[ 7290.415052] <4>[ 7290.415067] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415087] [] ? acpi_idle_enter_bm+0x27a/0x2a5 <4>[ 7290.415107] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415130] [] ? cpuidle_idle_call+0x93/0xf0 <4>[ 7290.415149] [] ? cpu_idle+0xa7/0x110 <4>[ 7290.415168] [] ? rest_init+0x75/0x80 <4>[ 7290.415187] [] ? start_kernel+0x3a7/0x3b3 <4>[ 7290.415206] [] ? x86_64_start_reservations+0x125/0x129 <4>[ 7290.415227] [] ? x86_64_start_kernel+0xe4/0xeb <0>[ 7290.415243] Code: 00 41 39 ce 0f 8d e8 01 00 00 48 8b 47 40 48 63 d2 48 69 d2 98 00 00 00 4c 8b 04 02 48 c7 c2 20 cf dd a0 49 8d 78 38 49 8d 40 4f 47 09 00 c6 47 0c 00 c6 47 0f 00 c6 47 12 00 c6 47 15 00 49 <1>[ 7290.415382] RIP [] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.415410] RSP <0>[ 7290.415421] CR2: 0000000000000041 <4>[ 7290.415436] ---[ end trace ec46807277caa515 ]--- <0>[ 7290.415450] Kernel panic - not syncing: Fatal exception in interrupt <4>[ 7290.415468] Pid: 0, comm: swapper Tainted: P D 2.6.32-rc8-wl #213 <4>[ 7290.415486] Call Trace: <4>[ 7290.415495] [] panic+0x7d/0x13a <4>[ 7290.415519] [] oops_end+0xda/0xe0 <4>[ 7290.415538] [] no_context+0xea/0x250 <4>[ 7290.415557] [] ? select_task_rq_fair+0x511/0x780 <4>[ 7290.415578] [] __bad_area_nosemaphore+0x125/0x1e0 <4>[ 7290.415597] [] ? __enqueue_entity+0x7c/0x80 <4>[ 7290.415616] [] ? enqueue_task_fair+0x111/0x150 <4>[ 7290.415636] [] bad_area_nosemaphore+0xe/0x10 <4>[ 7290.415656] [] do_page_fault+0x26a/0x320 <4>[ 7290.415674] [] page_fault+0x1f/0x30 <4>[ 7290.415697] [] ? iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.415723] [] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945] <4>[ 7290.415746] [] ? _spin_unlock+0x30/0x60 <4>[ 7290.415764] [] tasklet_action+0x101/0x110 <4>[ 7290.415783] [] __do_softirq+0xc0/0x160 <4>[ 7290.415801] [] call_softirq+0x1c/0x30 <4>[ 7290.415818] [] do_softirq+0x75/0xb0 <4>[ 7290.415835] [] irq_exit+0x95/0xa0 <4>[ 7290.415852] [] do_IRQ+0x77/0xf0 <4>[ 7290.415869] [] ret_from_intr+0x0/0xf <4>[ 7290.415883] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415911] [] ? acpi_idle_enter_bm+0x27a/0x2a5 <4>[ 7290.415931] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415952] [] ? cpuidle_idle_call+0x93/0xf0 <4>[ 7290.415971] [] ? cpu_idle+0xa7/0x110 <4>[ 7290.415989] [] ? rest_init+0x75/0x80 <4>[ 7290.416007] [] ? start_kernel+0x3a7/0x3b3 <4>[ 7290.416026] [] ? x86_64_start_reservations+0x125/0x129 <4>[ 7290.416047] [] ? x86_64_start_kernel+0xe4/0xeb Reported-by: Maxim Levitsky Tested-by: Maxim Levitsky Signed-off-by: Zhu Yi Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 96b23f4571cb..e5d8fa38432e 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -548,6 +548,9 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) txq = &priv->txq[txq_id]; q = &txq->q; + if ((iwl_queue_space(q) < q->high_mark)) + goto drop; + spin_lock_irqsave(&priv->lock, flags); idx = get_cmd_index(q, q->write_ptr, 0); From 6c3069b1e7e983e176a5f826e2edffefdd404a08 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Mon, 14 Dec 2009 14:12:13 -0800 Subject: [PATCH 0074/1626] iwlwifi: fix 40MHz operation setting on cards that do not allow it Some devices have 40MHz operation disabled entirely. Ensure that driver do not enable 40MHz operation if a channel does not allow this. This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2135 Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-eeprom.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index 08ad6e41a1cc..4a30969689ff 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -749,7 +749,8 @@ static int iwl_mod_ht40_chan_info(struct iwl_priv *priv, ch_info->ht40_eeprom = *eeprom_ch; ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg; ch_info->ht40_flags = eeprom_ch->flags; - ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel; + if (eeprom_ch->flags & EEPROM_CHANNEL_VALID) + ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel; return 0; } From 7988436c6330eab98f64b6e799ce2d30fe5ffd55 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 14 Dec 2009 23:32:31 +0100 Subject: [PATCH 0075/1626] rt2x00: Fix calculation of rt2800 iveiv entry offset. Fix typo. The index should be multiplied by the entry size, not 'and'-ed. Found via code-inspection. Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index c5fe867665e6..1a7eae357fef 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -1323,7 +1323,7 @@ #define PAIRWISE_KEY_ENTRY(__idx) \ ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) #define MAC_IVEIV_ENTRY(__idx) \ - ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) ) + ( MAC_IVEIV_TABLE_BASE + ((__idx) * sizeof(struct mac_iveiv_entry)) ) #define MAC_WCID_ATTR_ENTRY(__idx) \ ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) ) #define SHARED_KEY_ENTRY(__idx) \ From 17b182e3db255ab068c2ebb85f34840607a53cc4 Mon Sep 17 00:00:00 2001 From: Sujith Date: Mon, 14 Dec 2009 14:56:56 +0530 Subject: [PATCH 0076/1626] ath9k: Fix bug in assigning sequence number The internal, driver-specific maintenance of sequence numbers is applicable only for HT frames. Also, remove comments that are not relevant anymore. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 67706205699b..fd0cf4d854e0 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1414,17 +1414,9 @@ static void assign_aggr_tid_seqno(struct sk_buff *skb, * For HT capable stations, we save tidno for later use. * We also override seqno set by upper layer with the one * in tx aggregation state. - * - * If fragmentation is on, the sequence number is - * not overridden, since it has been - * incremented by the fragmentation routine. - * - * FIXME: check if the fragmentation threshold exceeds - * IEEE80211 max. */ tid = ATH_AN_2_TID(an, bf->bf_tidno); - hdr->seq_ctrl = cpu_to_le16(tid->seq_next << - IEEE80211_SEQ_SEQ_SHIFT); + hdr->seq_ctrl = cpu_to_le16(tid->seq_next << IEEE80211_SEQ_SEQ_SHIFT); bf->bf_seqno = tid->seq_next; INCR(tid->seq_next, IEEE80211_SEQ_MAX); } @@ -1636,7 +1628,8 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf, bf->bf_keyix = ATH9K_TXKEYIX_INVALID; } - if (ieee80211_is_data_qos(fc) && (sc->sc_flags & SC_OP_TXAGGR)) + if (ieee80211_is_data_qos(fc) && bf_isht(bf) && + (sc->sc_flags & SC_OP_TXAGGR)) assign_aggr_tid_seqno(skb, bf); bf->bf_mpdu = skb; From e8009e9850d59000d518296af372888911a129bd Mon Sep 17 00:00:00 2001 From: Sujith Date: Mon, 14 Dec 2009 14:57:08 +0530 Subject: [PATCH 0077/1626] ath9k: Fix TX queue draining When TX DMA termination has failed, the HW has to be reset completely. Doing a fast channel change in this case is insufficient. Also, change the debug level of a couple of messages to FATAL. Cc: stable@kernel.org Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/mac.c | 2 +- drivers/net/wireless/ath/ath9k/xmit.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 71b84d91dcff..efc420cd42bf 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -186,7 +186,7 @@ bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q) wait = wait_time; while (ath9k_hw_numtxpending(ah, q)) { if ((--wait) == 0) { - ath_print(common, ATH_DBG_QUEUE, + ath_print(common, ATH_DBG_FATAL, "Failed to stop TX DMA in 100 " "msec after killing last frame\n"); break; diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index fd0cf4d854e0..1e813bbf474a 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1108,11 +1108,11 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) if (npend) { int r; - ath_print(common, ATH_DBG_XMIT, + ath_print(common, ATH_DBG_FATAL, "Unable to stop TxDMA. Reset HAL!\n"); spin_lock_bh(&sc->sc_resetlock); - r = ath9k_hw_reset(ah, sc->sc_ah->curchan, true); + r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false); if (r) ath_print(common, ATH_DBG_FATAL, "Unable to reset hardware; reset status %d\n", From 2ab81d4a9a5ecb13d343269b3cdf5d975c81c570 Mon Sep 17 00:00:00 2001 From: Sujith Date: Mon, 14 Dec 2009 16:34:56 +0530 Subject: [PATCH 0078/1626] ath9k: Stop ANI when doing a reset The MIB counters are disabled when doing a chip reset. Since ANI depends on the MIB registers for its operation, relying on the contents of said registers during HW reset results in sub-optimal performance. Cc: stable@kernel.org Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index c48743452515..9e68c1a8aef0 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1973,6 +1973,9 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) struct ieee80211_hw *hw = sc->hw; int r; + /* Stop ANI */ + del_timer_sync(&common->ani.timer); + ath9k_hw_set_interrupts(ah, 0); ath_drain_all_txq(sc, retry_tx); ath_stoprecv(sc); @@ -2014,6 +2017,9 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) } } + /* Start ANI */ + ath_start_ani(common); + return r; } From 77ca7d9e2c099b4484bb10075948b4267f37d9fa Mon Sep 17 00:00:00 2001 From: "akpm@linux-foundation.org" Date: Mon, 14 Dec 2009 15:56:54 -0800 Subject: [PATCH 0079/1626] drivers/net/wireless/iwlwifi/iwl-tx.c: fix gcc-3.4.5 warning drivers/net/wireless/iwlwifi/iwl-tx.c: In function `iwl_hw_txq_ctx_free': drivers/net/wireless/iwlwifi/iwl-tx.c:410: warning: suggest explicit braces to avoid ambiguous `else' Cc: Zhu Yi Cc: Reinette Chatre Signed-off-by: Andrew Morton Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-tx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 00da5e152d46..87ce2bd292c7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -407,13 +407,14 @@ void iwl_hw_txq_ctx_free(struct iwl_priv *priv) int txq_id; /* Tx queues */ - if (priv->txq) + if (priv->txq) { for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) if (txq_id == IWL_CMD_QUEUE_NUM) iwl_cmd_queue_free(priv); else iwl_tx_queue_free(priv, txq_id); + } iwl_free_dma_ptr(priv, &priv->kw); iwl_free_dma_ptr(priv, &priv->scd_bc_tbls); From 45b241689179a6065384260242637cf21dabfb2d Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 16 Dec 2009 05:12:58 +0100 Subject: [PATCH 0080/1626] Libertas: fix buffer overflow in lbs_get_essid() The libertas driver copies the SSID buffer back to the wireless core and appends a trailing NULL character for termination. This is a) unnecessary because the buffer is allocated with kzalloc and is hence already NULLed when this function is called, and b) for priv->curbssparams.ssid_len == 32, it writes back one byte too much which causes memory corruptions. Fix this by removing the extra write. Signed-off-by: Daniel Mack Cc: Stephen Hemminger Cc: Maithili Hinge Cc: Kiran Divekar Cc: Michael Hirsch Cc: netdev@vger.kernel.org Cc: libertas-dev@lists.infradead.org Cc: linux-wireless@lists.infradead.org Cc: stable@kernel.org Acked-by: Holger Schurig Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/wext.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c index a8eb9e1fcf36..4b1aab593a84 100644 --- a/drivers/net/wireless/libertas/wext.c +++ b/drivers/net/wireless/libertas/wext.c @@ -2025,10 +2025,8 @@ static int lbs_get_essid(struct net_device *dev, struct iw_request_info *info, if (priv->connect_status == LBS_CONNECTED) { memcpy(extra, priv->curbssparams.ssid, priv->curbssparams.ssid_len); - extra[priv->curbssparams.ssid_len] = '\0'; } else { memset(extra, 0, 32); - extra[priv->curbssparams.ssid_len] = '\0'; } /* * If none, we may want to get the one that was set From 8585c2b896861aacd15337c3c7e58ad114e6cf60 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 16 Dec 2009 17:01:38 +0100 Subject: [PATCH 0081/1626] iwmc3200wifi: Fix test of unsigned in iwm_ntf_stop_resume_tx() `queue' was unsigned so the test did not work. Signed-off-by: Roel Kluin Reviewed-by: Pavel Roskin Acked-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwmc3200wifi/iwm.h | 2 +- drivers/net/wireless/iwmc3200wifi/netdev.c | 2 +- drivers/net/wireless/iwmc3200wifi/rx.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwmc3200wifi/iwm.h b/drivers/net/wireless/iwmc3200wifi/iwm.h index 5a26bb05a33a..79ffa3b98d73 100644 --- a/drivers/net/wireless/iwmc3200wifi/iwm.h +++ b/drivers/net/wireless/iwmc3200wifi/iwm.h @@ -349,7 +349,7 @@ int iwm_up(struct iwm_priv *iwm); int iwm_down(struct iwm_priv *iwm); /* TX API */ -u16 iwm_tid_to_queue(u16 tid); +int iwm_tid_to_queue(u16 tid); void iwm_tx_credit_inc(struct iwm_priv *iwm, int id, int total_freed_pages); void iwm_tx_worker(struct work_struct *work); int iwm_xmit_frame(struct sk_buff *skb, struct net_device *netdev); diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c index e4f0f8705f65..c4c0d23c63ec 100644 --- a/drivers/net/wireless/iwmc3200wifi/netdev.c +++ b/drivers/net/wireless/iwmc3200wifi/netdev.c @@ -76,7 +76,7 @@ static int iwm_stop(struct net_device *ndev) */ static const u16 iwm_1d_to_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 }; -u16 iwm_tid_to_queue(u16 tid) +int iwm_tid_to_queue(u16 tid) { if (tid > IWM_UMAC_TID_NR - 2) return -EINVAL; diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c index 72c27a3e5528..3db3d8b07491 100644 --- a/drivers/net/wireless/iwmc3200wifi/rx.c +++ b/drivers/net/wireless/iwmc3200wifi/rx.c @@ -1126,7 +1126,7 @@ static int iwm_ntf_stop_resume_tx(struct iwm_priv *iwm, u8 *buf, if (!stop) { struct iwm_tx_queue *txq; - u16 queue = iwm_tid_to_queue(bit); + int queue = iwm_tid_to_queue(bit); if (queue < 0) continue; From 9a418af5df03ad133cd8c8f6742b75e542db6392 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 17 Dec 2009 13:55:48 +0100 Subject: [PATCH 0082/1626] mac80211: fix peer HT capabilities I noticed yesterday, because Jeff had noticed a speed regression, cf. bug http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2138 that the SM PS settings for peers were wrong. Instead of overwriting the SM PS settings with the local bits, we need to keep the remote bits. The bug was part of the original HT code from over two years ago, but unfortunately nobody noticed that it makes no sense -- we shouldn't be overwriting the peer's setting with our own but rather keep it intact when masking the peer capabilities with our own. While fixing that, I noticed that the masking of capabilities is completely useless for most of the bits, so also fix those other bits. Finally, I also noticed that PSMP_SUPPORT no longer exists in the final 802.11n version, so also remove that. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 3 +-- include/linux/ieee80211.h | 2 +- net/mac80211/ht.c | 25 ++++++++++++++++++++++--- 3 files changed, 24 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 6bf6c0f12f35..27bf887f1453 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2080,8 +2080,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_TX_STBC | - IEEE80211_HT_CAP_RX_STBC | - IEEE80211_HT_CAP_PSMP_SUPPORT; + IEEE80211_HT_CAP_RX_STBC; spec->ht.ampdu_factor = 3; spec->ht.ampdu_density = 4; spec->ht.mcs.tx_params = diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index d9724a28c0c2..163c840437d6 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -832,7 +832,7 @@ struct ieee80211_ht_cap { #define IEEE80211_HT_CAP_DELAY_BA 0x0400 #define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 #define IEEE80211_HT_CAP_DSSSCCK40 0x1000 -#define IEEE80211_HT_CAP_PSMP_SUPPORT 0x2000 +#define IEEE80211_HT_CAP_RESERVED 0x2000 #define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000 #define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000 diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 3787455fb696..d7dcee680728 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -34,9 +34,28 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband, ht_cap->ht_supported = true; - ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & sband->ht_cap.cap; - ht_cap->cap &= ~IEEE80211_HT_CAP_SM_PS; - ht_cap->cap |= sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS; + /* + * The bits listed in this expression should be + * the same for the peer and us, if the station + * advertises more then we can't use those thus + * we mask them out. + */ + ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & + (sband->ht_cap.cap | + ~(IEEE80211_HT_CAP_LDPC_CODING | + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_GRN_FLD | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_DSSSCCK40)); + /* + * The STBC bits are asymmetric -- if we don't have + * TX then mask out the peer's RX and vice versa. + */ + if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_TX_STBC)) + ht_cap->cap &= ~IEEE80211_HT_CAP_RX_STBC; + if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)) + ht_cap->cap &= ~IEEE80211_HT_CAP_TX_STBC; ampdu_info = ht_cap_ie->ampdu_params_info; ht_cap->ampdu_factor = From 0183826b58a2712ffe608bc3302447be3e6a3ab8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 17 Dec 2009 16:16:53 +0100 Subject: [PATCH 0083/1626] mac80211: fix WMM AP settings application My commit 77fdaa12cea26c204cc12c312fe40bc0f3dcdfd8 Author: Johannes Berg Date: Tue Jul 7 03:45:17 2009 +0200 mac80211: rework MLME for multiple authentications inadvertedly broke WMM because it removed, along with a bunch of other now useless initialisations, the line initialising sdata->u.mgd.wmm_last_param_set to -1 which would make it adopt any WMM parameter set. If, as is usually the case, the AP uses WMM parameter set sequence number zero, we'd never update it until the AP changes the sequence number. Add the missing initialisation back to get the WMM settings from the AP applied locally. Signed-off-by: Johannes Berg Cc: stable@kernel.org [2.6.31+] Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d8d50fb5e823..c79e59f82fd9 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -915,6 +915,14 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL | IEEE80211_STA_BEACON_POLL); + /* + * Always handle WMM once after association regardless + * of the first value the AP uses. Setting -1 here has + * that effect because the AP values is an unsigned + * 4-bit value. + */ + sdata->u.mgd.wmm_last_param_set = -1; + ieee80211_led_assoc(local, 1); sdata->vif.bss_conf.assoc = 1; From 92c6f8d849178582fc527aaf1e51dd37a74767d3 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 18 Dec 2009 11:19:32 -0800 Subject: [PATCH 0084/1626] ps3_gelic_wireless: Fix build failure due to missing WEXT_PRIV The option to support the old style PSK interface in the PS3 GELIC wireless drivers requires CONFIG_WEXT_PRIV to be set Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Geoff Levand Signed-off-by: John W. Linville --- drivers/net/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 0bbd5ae49862..18ff622703be 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2344,6 +2344,7 @@ config GELIC_NET config GELIC_WIRELESS bool "PS3 Wireless support" + depends on WLAN depends on GELIC_NET select WIRELESS_EXT help @@ -2356,6 +2357,7 @@ config GELIC_WIRELESS config GELIC_WIRELESS_OLD_PSK_INTERFACE bool "PS3 Wireless private PSK interface (OBSOLETE)" depends on GELIC_WIRELESS + select WEXT_PRIV help This option retains the obsolete private interface to pass the PSK from user space programs to the driver. The PSK From c757bea93bea4b77ebd181cc6dca60c15e3b1a2c Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 21 Dec 2009 22:35:16 -0500 Subject: [PATCH 0085/1626] tracing: Fix setting tracer specific options The function __set_tracer_option() takes as its last parameter a "neg" value. If set it should negate the value of the option. The trace_options_write() passed the value written to the file which is what the new value needs to be set as. But since this is not the negative, it never sets the value. Reported-by: Peter Zijlstra Cc: Li Zefan Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index ee61915935d5..d0a4c12d1f1c 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3949,7 +3949,7 @@ trace_options_write(struct file *filp, const char __user *ubuf, size_t cnt, if (!!(topt->flags->val & topt->opt->bit) != val) { mutex_lock(&trace_types_lock); ret = __set_tracer_option(current_trace, topt->flags, - topt->opt, val); + topt->opt, !val); mutex_unlock(&trace_types_lock); if (ret) return ret; From df9dc83d193959f990c981787279e8541fe9df8c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 21 Dec 2009 16:27:49 -0800 Subject: [PATCH 0086/1626] drivers/block/DAC960.c: use DAC960_V2_Controller DAC960_LP_Controller and DAC960_V2_Controller have the same value, but elsewhere it is DAC960_V1_Controller or DAC960_V2_Controller that is used in the FirmwareType field. Signed-off-by: Julia Lawall Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/DAC960.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c index eb4fa1943944..ce1fa923c414 100644 --- a/drivers/block/DAC960.c +++ b/drivers/block/DAC960.c @@ -7101,7 +7101,7 @@ static struct DAC960_privdata DAC960_BA_privdata = { static struct DAC960_privdata DAC960_LP_privdata = { .HardwareType = DAC960_LP_Controller, - .FirmwareType = DAC960_LP_Controller, + .FirmwareType = DAC960_V2_Controller, .InterruptHandler = DAC960_LP_InterruptHandler, .MemoryWindowSize = DAC960_LP_RegisterWindowSize, }; From e019ef0c4f11a0acb79b89fb1e09c72197b42bbe Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 21 Dec 2009 16:27:49 -0800 Subject: [PATCH 0087/1626] drivers/block/mg_disk.c: use resource_size() Use resource_size() for ioremap. The ioremap appears to be passing the incorrect size for the platform resource. Unfortunately, I can't locate a user in mainline to verify this. Using resource_size should be the correct fix. Signed-off-by: H Hartley Sweeten Acked-by: unsik Kim Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/mg_disk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index e0339aaa1815..02b2583df7fc 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -860,7 +860,7 @@ static int mg_probe(struct platform_device *plat_dev) err = -EINVAL; goto probe_err_2; } - host->dev_base = ioremap(rsc->start , rsc->end + 1); + host->dev_base = ioremap(rsc->start, resource_size(rsc)); if (!host->dev_base) { printk(KERN_ERR "%s:%d ioremap fail\n", __func__, __LINE__); From 6ec1480d8539c8e2e6ba7fbbeffe5adc640bfe98 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 21 Dec 2009 16:27:50 -0800 Subject: [PATCH 0088/1626] aoe: switch to the new bio_flush_dcache_pages() interface Cc: "Ed L. Cashin" Cc: David Woodhouse Cc: Ilya Loginov Cc: Ingo Molnar Cc: Peter Horton Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/aoe/aoecmd.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index 13bb69d2abb3..64a223b0cc22 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -735,21 +735,6 @@ diskstats(struct gendisk *disk, struct bio *bio, ulong duration, sector_t sector part_stat_unlock(); } -/* - * Ensure we don't create aliases in VI caches - */ -static inline void -killalias(struct bio *bio) -{ - struct bio_vec *bv; - int i; - - if (bio_data_dir(bio) == READ) - __bio_for_each_segment(bv, bio, i, 0) { - flush_dcache_page(bv->bv_page); - } -} - void aoecmd_ata_rsp(struct sk_buff *skb) { @@ -871,7 +856,7 @@ aoecmd_ata_rsp(struct sk_buff *skb) if (buf->flags & BUFFL_FAIL) bio_endio(buf->bio, -EIO); else { - killalias(buf->bio); + bio_flush_dcache_pages(buf->bio); bio_endio(buf->bio, 0); } mempool_free(buf, d->bufpool); From ae24e578de02b87cce3dc59248c29b2ecb071e9e Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 22 Dec 2009 09:42:06 +0100 Subject: [PATCH 0089/1626] ipvs: ip_vs_wrr.c: use lib/gcd.c Remove the private version of the greatest common divider to use lib/gcd.c, the latter also implementing the a < b case. [akpm@linux-foundation.org: repair neighboring whitespace because the diff looked odd] Signed-off-by: Florian Fainelli Cc: Sergei Shtylyov Cc: Takashi Iwai Acked-by: Simon Horman Cc: Julius Volz Cc: David S. Miller Cc: Patrick McHardy Signed-off-by: Andrew Morton Signed-off-by: Patrick McHardy --- net/netfilter/ipvs/Kconfig | 3 ++- net/netfilter/ipvs/ip_vs_wrr.c | 15 +-------------- 2 files changed, 3 insertions(+), 15 deletions(-) diff --git a/net/netfilter/ipvs/Kconfig b/net/netfilter/ipvs/Kconfig index 79a698052218..f2d76238b9b5 100644 --- a/net/netfilter/ipvs/Kconfig +++ b/net/netfilter/ipvs/Kconfig @@ -112,7 +112,8 @@ config IP_VS_RR module, choose M here. If unsure, say N. config IP_VS_WRR - tristate "weighted round-robin scheduling" + tristate "weighted round-robin scheduling" + select GCD ---help--- The weighted robin-robin scheduling algorithm directs network connections to different real servers based on server weights diff --git a/net/netfilter/ipvs/ip_vs_wrr.c b/net/netfilter/ipvs/ip_vs_wrr.c index 6182e8ea0be7..3c115fc19784 100644 --- a/net/netfilter/ipvs/ip_vs_wrr.c +++ b/net/netfilter/ipvs/ip_vs_wrr.c @@ -24,6 +24,7 @@ #include #include #include +#include #include @@ -38,20 +39,6 @@ struct ip_vs_wrr_mark { }; -/* - * Get the gcd of server weights - */ -static int gcd(int a, int b) -{ - int c; - - while ((c = a % b)) { - a = b; - b = c; - } - return b; -} - static int ip_vs_wrr_gcd_weight(struct ip_vs_service *svc) { struct ip_vs_dest *dest; From 1e9d1b13efae7e0a2705611d47ae5f07e27015f0 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 19 Dec 2009 08:30:30 +0100 Subject: [PATCH 0090/1626] drivers/dma: drop unnecesary memset memset of 0 is not needed after kzalloc The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression x; statement S; @@ x = kzalloc(...); if (x == NULL) S ... when != x -memset(x,0,...);// Signed-off-by: Julia Lawall Signed-off-by: Dan Williams --- drivers/dma/dw_dmac.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 2eea823516a7..53bb3cac248f 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -1270,8 +1270,6 @@ static int __init dw_probe(struct platform_device *pdev) goto err_kfree; } - memset(dw, 0, sizeof *dw); - dw->regs = ioremap(io->start, DW_REGLEN); if (!dw->regs) { err = -ENOMEM; From 0794ec8ce327ec74416b569b8fb1951274693700 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 22 Dec 2009 21:30:59 +0100 Subject: [PATCH 0091/1626] drivers/dma: Correct use after free Move the kfree after the iounmap that refers to the same structure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,e; identifier f; iterator I; statement S; @@ *kfree(x); ... when != &x when != x = e when != I(x,...) S *x->f // Signed-off-by: Julia Lawall Signed-off-by: Dan Williams --- drivers/dma/coh901318.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index 4a99cd94536b..b5f2ee0f8e2c 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -1294,8 +1294,8 @@ static int __exit coh901318_remove(struct platform_device *pdev) dma_async_device_unregister(&base->dma_slave); coh901318_pool_destroy(&base->pool); free_irq(platform_get_irq(pdev, 0), base); - kfree(base); iounmap(base->virtbase); + kfree(base); release_mem_region(pdev->resource->start, resource_size(pdev->resource)); return 0; From b9bf770e0d4cc95e43ab04c66e705ba72a9bded3 Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Wed, 9 Dec 2009 10:37:10 +0000 Subject: [PATCH 0092/1626] ARM: S3C24XX: touchscreen device definition Add definition for the touchscreen driver platform data and initial support for the H1940 machine. Signed-off-by: Arnaud Patard Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/ts.h | 21 +++++++++++++++++++++ arch/arm/plat-s3c/include/plat/devs.h | 1 + arch/arm/plat-s3c24xx/devs.c | 18 ++++++++++++++++++ arch/arm/plat-s3c24xx/s3c244x.c | 1 + 4 files changed, 41 insertions(+) create mode 100644 arch/arm/mach-s3c2410/include/mach/ts.h diff --git a/arch/arm/mach-s3c2410/include/mach/ts.h b/arch/arm/mach-s3c2410/include/mach/ts.h new file mode 100644 index 000000000000..dc361700d695 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/ts.h @@ -0,0 +1,21 @@ +/* linux/include/asm/arch-s3c2410/ts.h + * + * Copyright (c) 2005 Arnaud Patard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_TS_H +#define __ASM_ARM_TS_H + +struct s3c2410_ts_mach_info { + int delay; + int presc; + int oversampling_shift; +}; + +extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); + +#endif /* __ASM_ARM_TS_H */ diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index 932cbbbb4273..c1c20b023917 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -31,6 +31,7 @@ extern struct platform_device s3c64xx_device_iisv4; extern struct platform_device s3c64xx_device_pcm0; extern struct platform_device s3c64xx_device_pcm1; +extern struct platform_device s3c_device_ts; extern struct platform_device s3c_device_fb; extern struct platform_device s3c_device_usb; extern struct platform_device s3c_device_lcd; diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index f52a92ce8dda..7f686a31e672 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -37,6 +37,8 @@ #include #include +#include + /* Serial port registrations */ static struct resource s3c2410_uart0_resource[] = { @@ -182,6 +184,22 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) } } +/* Touchscreen */ +struct platform_device s3c_device_ts = { + .name = "s3c2410-ts", + .id = -1, +}; +EXPORT_SYMBOL(s3c_device_ts); + +static struct s3c2410_ts_mach_info s3c2410ts_info; + +void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info) +{ + memcpy(&s3c2410ts_info, hard_s3c2410ts_info, sizeof(struct s3c2410_ts_mach_info)); + s3c_device_ts.dev.platform_data = &s3c2410ts_info; +} +EXPORT_SYMBOL(s3c24xx_ts_set_platdata); + /* USB Device (Gadget)*/ static struct resource s3c_usbgadget_resource[] = { diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index 1364317d421e..12623a474b54 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -70,6 +70,7 @@ void __init s3c244x_map_io(void) s3c_device_sdi.name = "s3c2440-sdi"; s3c_device_i2c0.name = "s3c2440-i2c"; s3c_device_nand.name = "s3c2440-nand"; + s3c_device_ts.name = "s3c2440-ts"; s3c_device_usbgadget.name = "s3c2440-usbgadget"; } From cc3e1bea5d87635c519da657303690f5538bb4eb Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 23 Dec 2009 06:52:08 -0500 Subject: [PATCH 0093/1626] ext4, jbd2: Add barriers for file systems with exernal journals This is a bit complicated because we are trying to optimize when we send barriers to the fs data disk. We could just throw in an extra barrier to the data disk whenever we send a barrier to the journal disk, but that's not always strictly necessary. We only need to send a barrier during a commit when there are data blocks which are must be written out due to an inode written in ordered mode, or if fsync() depends on the commit to force data blocks to disk. Finally, before we drop transactions from the beginning of the journal during a checkpoint operation, we need to guarantee that any blocks that were flushed out to the data disk are firmly on the rust platter before we drop the transaction from the journal. Thanks to Oleg Drokin for pointing out this flaw in ext3/ext4. Signed-off-by: "Theodore Ts'o" --- fs/ext4/fsync.c | 16 ++++++++++++++-- fs/jbd2/checkpoint.c | 15 +++++++++++++++ fs/jbd2/commit.c | 19 +++++++++++-------- include/linux/jbd2.h | 1 + 4 files changed, 41 insertions(+), 10 deletions(-) diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c index 0b22497d92e1..98bd140aad01 100644 --- a/fs/ext4/fsync.c +++ b/fs/ext4/fsync.c @@ -88,9 +88,21 @@ int ext4_sync_file(struct file *file, struct dentry *dentry, int datasync) return ext4_force_commit(inode->i_sb); commit_tid = datasync ? ei->i_datasync_tid : ei->i_sync_tid; - if (jbd2_log_start_commit(journal, commit_tid)) + if (jbd2_log_start_commit(journal, commit_tid)) { + /* + * When the journal is on a different device than the + * fs data disk, we need to issue the barrier in + * writeback mode. (In ordered mode, the jbd2 layer + * will take care of issuing the barrier. In + * data=journal, all of the data blocks are written to + * the journal device.) + */ + if (ext4_should_writeback_data(inode) && + (journal->j_fs_dev != journal->j_dev) && + (journal->j_flags & JBD2_BARRIER)) + blkdev_issue_flush(inode->i_sb->s_bdev, NULL); jbd2_log_wait_commit(journal, commit_tid); - else if (journal->j_flags & JBD2_BARRIER) + } else if (journal->j_flags & JBD2_BARRIER) blkdev_issue_flush(inode->i_sb->s_bdev, NULL); return ret; } diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index ca0f5eb62b20..886849370950 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -22,6 +22,7 @@ #include #include #include +#include #include /* @@ -515,6 +516,20 @@ int jbd2_cleanup_journal_tail(journal_t *journal) journal->j_tail_sequence = first_tid; journal->j_tail = blocknr; spin_unlock(&journal->j_state_lock); + + /* + * If there is an external journal, we need to make sure that + * any data blocks that were recently written out --- perhaps + * by jbd2_log_do_checkpoint() --- are flushed out before we + * drop the transactions from the external journal. It's + * unlikely this will be necessary, especially with a + * appropriately sized journal, but we need this to guarantee + * correctness. Fortunately jbd2_cleanup_journal_tail() + * doesn't get called all that often. + */ + if ((journal->j_fs_dev != journal->j_dev) && + (journal->j_flags & JBD2_BARRIER)) + blkdev_issue_flush(journal->j_fs_dev, NULL); if (!(journal->j_flags & JBD2_ABORT)) jbd2_journal_update_superblock(journal, 1); return 0; diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 6a10238d2c63..1bc74b6f26d2 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -259,6 +259,7 @@ static int journal_submit_data_buffers(journal_t *journal, ret = err; spin_lock(&journal->j_list_lock); J_ASSERT(jinode->i_transaction == commit_transaction); + commit_transaction->t_flushed_data_blocks = 1; jinode->i_flags &= ~JI_COMMIT_RUNNING; wake_up_bit(&jinode->i_flags, __JI_COMMIT_RUNNING); } @@ -708,8 +709,17 @@ start_journal_io: } } - /* Done it all: now write the commit record asynchronously. */ + /* + * If the journal is not located on the file system device, + * then we must flush the file system device before we issue + * the commit record + */ + if (commit_transaction->t_flushed_data_blocks && + (journal->j_fs_dev != journal->j_dev) && + (journal->j_flags & JBD2_BARRIER)) + blkdev_issue_flush(journal->j_fs_dev, NULL); + /* Done it all: now write the commit record asynchronously. */ if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)) { err = journal_submit_commit_record(journal, commit_transaction, @@ -720,13 +730,6 @@ start_journal_io: blkdev_issue_flush(journal->j_dev, NULL); } - /* - * This is the right place to wait for data buffers both for ASYNC - * and !ASYNC commit. If commit is ASYNC, we need to wait only after - * the commit block went to disk (which happens above). If commit is - * SYNC, we need to wait for data buffers before we start writing - * commit block, which happens below in such setting. - */ err = journal_finish_inode_data_buffers(journal, commit_transaction); if (err) { printk(KERN_WARNING diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index f1011f7f3d41..638ce4554c76 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -653,6 +653,7 @@ struct transaction_s * waiting for it to finish. */ unsigned int t_synchronous_commit:1; + unsigned int t_flushed_data_blocks:1; /* * For use by the filesystem to store fs-specific data From a6b43e382568a49cc64291bfaddf896652d44f70 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 23 Dec 2009 07:48:08 -0500 Subject: [PATCH 0094/1626] ext4: fix unsigned long long printk warning in super.c sparc64 allmodconfig: fs/ext4/super.c: In function `lifetime_write_kbytes_show': fs/ext4/super.c:2174: warning: long long unsigned int format, long unsigned int arg (arg 4) fs/ext4/super.c:2174: warning: long long unsigned int format, long unsigned int arg (arg 4) Signed-off-by: Andrew Morton Signed-off-by: "Theodore Ts'o" --- fs/ext4/super.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 0a06fe6f2bc2..7cccb35c0f4d 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2174,9 +2174,9 @@ static ssize_t lifetime_write_kbytes_show(struct ext4_attr *a, struct super_block *sb = sbi->s_buddy_cache->i_sb; return snprintf(buf, PAGE_SIZE, "%llu\n", - sbi->s_kbytes_written + + (unsigned long long)(sbi->s_kbytes_written + ((part_stat_read(sb->s_bdev->bd_part, sectors[1]) - - EXT4_SB(sb)->s_sectors_written_start) >> 1)); + EXT4_SB(sb)->s_sectors_written_start) >> 1))); } static ssize_t inode_readahead_blks_store(struct ext4_attr *a, From d3533d72e7478a61a3e1936956fc825289a2acf4 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 23 Dec 2009 07:52:31 -0500 Subject: [PATCH 0095/1626] ext4: Eliminate potential double free on error path b_entry_name and buffer are initially NULL, are initialized within a loop to the result of calling kmalloc, and are freed at the bottom of this loop. The loop contains gotos to cleanup, which also frees b_entry_name and buffer. Some of these gotos are before the reinitializations of b_entry_name and buffer. To maintain the invariant that b_entry_name and buffer are NULL at the top of the loop, and thus acceptable arguments to kfree, these variables are now set to NULL after the kfrees. This seems to be the simplest solution. A more complicated solution would be to introduce more labels in the error handling code at the end of the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ identifier E; expression E1; iterator I; statement S; @@ *kfree(E); ... when != E = E1 when != I(E,...) S when != &E *kfree(E); // Signed-off-by: Julia Lawall Signed-off-by: "Theodore Ts'o" --- fs/ext4/xattr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 83218bebbc7c..f3a2f7ed45aa 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1332,6 +1332,8 @@ retry: goto cleanup; kfree(b_entry_name); kfree(buffer); + b_entry_name = NULL; + buffer = NULL; brelse(is->iloc.bh); kfree(is); kfree(bs); From 17bd55d037a02b04d9119511cfd1a4b985d20f63 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Wed, 23 Dec 2009 07:57:07 -0500 Subject: [PATCH 0096/1626] fs-writeback: Add helper function to start writeback if idle ext4, at least, would like to start pushing on writeback if it starts to get close to ENOSPC when reserving worst-case blocks for delalloc writes. Writing out delalloc data will convert those worst-case predictions into usually smaller actual usage, freeing up space before we hit ENOSPC based on this speculation. Thanks to Jens for the suggestion for the helper function, & the naming help. I've made the helper return status on whether writeback was started even though I don't plan to use it in the ext4 patch; it seems like it would be potentially useful to test this in some cases. Signed-off-by: Eric Sandeen Acked-by: Jan Kara --- fs/fs-writeback.c | 17 +++++++++++++++++ include/linux/writeback.h | 1 + 2 files changed, 18 insertions(+) diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 49bc1b8e8f19..f6c2155e0026 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -1186,6 +1186,23 @@ void writeback_inodes_sb(struct super_block *sb) } EXPORT_SYMBOL(writeback_inodes_sb); +/** + * writeback_inodes_sb_if_idle - start writeback if none underway + * @sb: the superblock + * + * Invoke writeback_inodes_sb if no writeback is currently underway. + * Returns 1 if writeback was started, 0 if not. + */ +int writeback_inodes_sb_if_idle(struct super_block *sb) +{ + if (!writeback_in_progress(sb->s_bdi)) { + writeback_inodes_sb(sb); + return 1; + } else + return 0; +} +EXPORT_SYMBOL(writeback_inodes_sb_if_idle); + /** * sync_inodes_sb - sync sb inode pages * @sb: the superblock diff --git a/include/linux/writeback.h b/include/linux/writeback.h index c18c008f4bbf..76e8903cd204 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -70,6 +70,7 @@ struct writeback_control { struct bdi_writeback; int inode_wait(void *); void writeback_inodes_sb(struct super_block *); +int writeback_inodes_sb_if_idle(struct super_block *); void sync_inodes_sb(struct super_block *); void writeback_inodes_wbc(struct writeback_control *wbc); long wb_do_writeback(struct bdi_writeback *wb, int force_wait); From c8afb44682fcef6273e8b8eb19fab13ddd05b386 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Wed, 23 Dec 2009 07:58:12 -0500 Subject: [PATCH 0097/1626] ext4: flush delalloc blocks when space is low Creating many small files in rapid succession on a small filesystem can lead to spurious ENOSPC; on a 104MB filesystem: for i in `seq 1 22500`; do echo -n > $SCRATCH_MNT/$i echo XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX > $SCRATCH_MNT/$i done leads to ENOSPC even though after a sync, 40% of the fs is free again. This is because we reserve worst-case metadata for delalloc writes, and when data is allocated that worst-case reservation is not usually needed. When freespace is low, kicking off an async writeback will start converting that worst-case space usage into something more realistic, almost always freeing up space to continue. This resolves the testcase for me, and survives all 4 generic ENOSPC tests in xfstests. We'll still need a hard synchronous sync to squeeze out the last bit, but this fixes things up to a large degree. Signed-off-by: Eric Sandeen Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index ab807963a614..282621f18c10 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2993,11 +2993,18 @@ static int ext4_nonda_switch(struct super_block *sb) if (2 * free_blocks < 3 * dirty_blocks || free_blocks < (dirty_blocks + EXT4_FREEBLOCKS_WATERMARK)) { /* - * free block count is less that 150% of dirty blocks - * or free blocks is less that watermark + * free block count is less than 150% of dirty blocks + * or free blocks is less than watermark */ return 1; } + /* + * Even if we don't switch but are nearing capacity, + * start pushing delalloc when 1/2 of free blocks are dirty. + */ + if (free_blocks < 2 * dirty_blocks) + writeback_inodes_sb_if_idle(sb); + return 0; } From 3ebfdf885acedafcadceb4007e77438479094135 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 23 Dec 2009 08:05:15 -0500 Subject: [PATCH 0098/1626] jbd2: don't use __GFP_NOFAIL in journal_init_common() It triggers the warning in get_page_from_freelist(), and it isn't appropriate to use __GFP_NOFAIL here anyway. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14843 Reported-by: Christian Casteyde Signed-off-by: Andrew Morton Signed-off-by: "Theodore Ts'o" --- fs/jbd2/journal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 17af879e6e9e..ac0d027595d0 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -814,7 +814,7 @@ static journal_t * journal_init_common (void) journal_t *journal; int err; - journal = kzalloc(sizeof(*journal), GFP_KERNEL|__GFP_NOFAIL); + journal = kzalloc(sizeof(*journal), GFP_KERNEL); if (!journal) goto fail; From f5908267b67917b8cbd98b27fd2be9b5f62ec76f Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 23 Dec 2009 23:22:34 +0800 Subject: [PATCH 0099/1626] hwrng: core - Fix double unlock in rng_dev_read When the loop terminates with size == 0 in rng_dev_read we will unlock the rng mutex twice. Reported-by: Dan Carpenter Signed-off-by: Herbert Xu --- drivers/char/hw_random/core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c index e989f67bb61f..3d9c61e5acbf 100644 --- a/drivers/char/hw_random/core.c +++ b/drivers/char/hw_random/core.c @@ -158,10 +158,11 @@ static ssize_t rng_dev_read(struct file *filp, char __user *buf, goto out; } } -out_unlock: - mutex_unlock(&rng_mutex); out: return ret ? : err; +out_unlock: + mutex_unlock(&rng_mutex); + goto out; } From d9237380754ccb25bf6aaa1437b0e132ccc70315 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 23 Dec 2009 19:25:01 +0000 Subject: [PATCH 0100/1626] ARM: mach-osiris: add NAND_SCAN_SILENT_NODEV to optional devices Add the NAND_SCAN_SILENT_NODEV to the optional NAND devices that may not be fitted to the board Signed-off-by: Ben Dooks Signed-off-by: Simtec Linux Team Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2440/mach-osiris.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 015dfb2a80da..f35371db33f5 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -208,6 +208,7 @@ static struct s3c2410_nand_set __initdata osiris_nand_sets[] = { .name = "External", .nr_chips = 1, .nr_map = external_map, + .options = NAND_SCAN_SILENT_NODEV, .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), .partitions = osiris_default_nand_part, }, @@ -222,6 +223,7 @@ static struct s3c2410_nand_set __initdata osiris_nand_sets[] = { .name = "chip1", .nr_chips = 1, .nr_map = chip1_map, + .options = NAND_SCAN_SILENT_NODEV, .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), .partitions = osiris_default_nand_part, }, From d3ef7ee4a7abd0bec23420e589eeaa88ba391e8c Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 23 Dec 2009 19:25:02 +0000 Subject: [PATCH 0101/1626] ARM: mach-bast: add NAND_SCAN_SILENT_NODEV to optional devices Add the NAND_SCAN_SILENT_NODEV to the optional NAND devices that may not be fitted to the board Signed-off-by: Ben Dooks Signed-off-by: Simtec Linux Team Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-bast.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 4c79ac8a6c33..97162fdd0590 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -279,6 +279,7 @@ static struct s3c2410_nand_set __initdata bast_nand_sets[] = { .name = "SmartMedia", .nr_chips = 1, .nr_map = smartmedia_map, + .options = NAND_SCAN_SILENT_NODEV, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), .partitions = bast_default_nand_part, }, @@ -293,6 +294,7 @@ static struct s3c2410_nand_set __initdata bast_nand_sets[] = { .name = "chip1", .nr_chips = 1, .nr_map = chip1_map, + .options = NAND_SCAN_SILENT_NODEV, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), .partitions = bast_default_nand_part, }, @@ -300,6 +302,7 @@ static struct s3c2410_nand_set __initdata bast_nand_sets[] = { .name = "chip2", .nr_chips = 1, .nr_map = chip2_map, + .options = NAND_SCAN_SILENT_NODEV, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), .partitions = bast_default_nand_part, } From ce8877b542d946ee4fb29b57dc9d6549648b1558 Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Wed, 23 Dec 2009 19:25:05 +0000 Subject: [PATCH 0102/1626] ARM: S3C24XX: touchscreen device definition Add definition for the touchscreen driver platform data and initial support for the H1940 machine. Signed-off-by: Arnaud Patard Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/ts.h | 21 +++++++++++++++++++++ arch/arm/mach-s3c2410/mach-h1940.c | 8 ++++++++ arch/arm/plat-s3c/include/plat/devs.h | 1 + arch/arm/plat-s3c24xx/devs.c | 18 ++++++++++++++++++ arch/arm/plat-s3c24xx/s3c244x.c | 1 + 5 files changed, 49 insertions(+) create mode 100644 arch/arm/mach-s3c2410/include/mach/ts.h diff --git a/arch/arm/mach-s3c2410/include/mach/ts.h b/arch/arm/mach-s3c2410/include/mach/ts.h new file mode 100644 index 000000000000..dc361700d695 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/ts.h @@ -0,0 +1,21 @@ +/* linux/include/asm/arch-s3c2410/ts.h + * + * Copyright (c) 2005 Arnaud Patard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_TS_H +#define __ASM_ARM_TS_H + +struct s3c2410_ts_mach_info { + int delay; + int presc; + int oversampling_shift; +}; + +extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); + +#endif /* __ASM_ARM_TS_H */ diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 49053254c98d..1e34abe1a19e 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -46,6 +46,7 @@ #include #include #include +#include #include #include @@ -140,6 +141,11 @@ static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = { .vbus_pin_inverted = 1, }; +static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, +}; /** * Set lcd on or off @@ -265,6 +271,7 @@ static struct platform_device h1940_lcd_powerdev = { }; static struct platform_device *h1940_devices[] __initdata = { + &s3c_device_ts, &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -305,6 +312,7 @@ static void __init h1940_init(void) s3c24xx_fb_set_platdata(&h1940_fb_info); s3c24xx_udc_set_platdata(&h1940_udc_cfg); + s3c24xx_ts_set_platdata(&h1940_ts_cfg); s3c_i2c0_set_platdata(NULL); s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg; diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index 932cbbbb4273..c1c20b023917 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -31,6 +31,7 @@ extern struct platform_device s3c64xx_device_iisv4; extern struct platform_device s3c64xx_device_pcm0; extern struct platform_device s3c64xx_device_pcm1; +extern struct platform_device s3c_device_ts; extern struct platform_device s3c_device_fb; extern struct platform_device s3c_device_usb; extern struct platform_device s3c_device_lcd; diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index f52a92ce8dda..7f686a31e672 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -37,6 +37,8 @@ #include #include +#include + /* Serial port registrations */ static struct resource s3c2410_uart0_resource[] = { @@ -182,6 +184,22 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) } } +/* Touchscreen */ +struct platform_device s3c_device_ts = { + .name = "s3c2410-ts", + .id = -1, +}; +EXPORT_SYMBOL(s3c_device_ts); + +static struct s3c2410_ts_mach_info s3c2410ts_info; + +void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info) +{ + memcpy(&s3c2410ts_info, hard_s3c2410ts_info, sizeof(struct s3c2410_ts_mach_info)); + s3c_device_ts.dev.platform_data = &s3c2410ts_info; +} +EXPORT_SYMBOL(s3c24xx_ts_set_platdata); + /* USB Device (Gadget)*/ static struct resource s3c_usbgadget_resource[] = { diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index 1364317d421e..12623a474b54 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -70,6 +70,7 @@ void __init s3c244x_map_io(void) s3c_device_sdi.name = "s3c2440-sdi"; s3c_device_i2c0.name = "s3c2440-i2c"; s3c_device_nand.name = "s3c2440-nand"; + s3c_device_ts.name = "s3c2440-ts"; s3c_device_usbgadget.name = "s3c2440-usbgadget"; } From 2b542a13a94f310e718f2ed57b0f712b9ddbbbef Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 23 Dec 2009 20:34:29 +0000 Subject: [PATCH 0103/1626] ARM: S3C: Fix NAND device registration by s3c_nand_set_platdata(). Fix two bugs in s3c_nand_set_platdata() where thet device's platform data was not set, and the wrong error check was being performed on the return of s3c_nand_copy_set(). Fixes the following OOPS: Unable to handle kernel NULL pointer dereference at virtual address 00000004 PC is at s3c24xx_nand_probe+0x234/0x594 Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/dev-nand.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c index e771e77dcd54..84808ccda70e 100644 --- a/arch/arm/plat-s3c/dev-nand.c +++ b/arch/arm/plat-s3c/dev-nand.c @@ -114,7 +114,7 @@ void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) for (i = 0; i < npd->nr_sets; i++) { ret = s3c_nand_copy_set(to); - if (!ret) { + if (ret) { printk(KERN_ERR "%s: failed to copy set %d\n", __func__, i); return; @@ -122,6 +122,8 @@ void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) to++; } } + + s3c_device_nand.dev.platform_data = npd; } EXPORT_SYMBOL_GPL(s3c_nand_set_platdata); From ff3b00a0fcaab89ff885e9f0f4ad83c4ced788f4 Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Wed, 23 Dec 2009 13:46:36 +0000 Subject: [PATCH 0104/1626] sfc: Move PHY software state initialisation from init() into probe() This prevents efx->link_advertising from being blatted during a reset. The phy_short_reach sysfs node is now destroyed later in the port shutdown process, so check for STATE_RUNNING after acquiring the rtnl_lock (just like in set_phy_flash_cfg). Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/efx.c | 6 +- drivers/net/sfc/falcon.c | 1 + drivers/net/sfc/mcdi_phy.c | 93 +++++++++-------------- drivers/net/sfc/net_driver.h | 1 + drivers/net/sfc/qt202x_phy.c | 20 ++--- drivers/net/sfc/siena.c | 1 + drivers/net/sfc/tenxpress.c | 140 +++++++++++++++++++---------------- 7 files changed, 130 insertions(+), 132 deletions(-) diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index f983e3b507cc..103e8b0e2a0d 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -741,14 +741,14 @@ static int efx_probe_port(struct efx_nic *efx) EFX_LOG(efx, "create port\n"); + if (phy_flash_cfg) + efx->phy_mode = PHY_MODE_SPECIAL; + /* Connect up MAC/PHY operations table */ rc = efx->type->probe_port(efx); if (rc) goto err; - if (phy_flash_cfg) - efx->phy_mode = PHY_MODE_SPECIAL; - /* Sanity check MAC address */ if (is_valid_ether_addr(efx->mac_address)) { memcpy(efx->net_dev->dev_addr, efx->mac_address, ETH_ALEN); diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 17afcd26e870..9d009c46e962 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -925,6 +925,7 @@ static int falcon_probe_port(struct efx_nic *efx) static void falcon_remove_port(struct efx_nic *efx) { + efx->phy_op->remove(efx); efx_nic_free_buffer(efx, &efx->stats_buffer); } diff --git a/drivers/net/sfc/mcdi_phy.c b/drivers/net/sfc/mcdi_phy.c index 0e1bcc5a0d52..eb694af7a473 100644 --- a/drivers/net/sfc/mcdi_phy.c +++ b/drivers/net/sfc/mcdi_phy.c @@ -304,31 +304,47 @@ static u32 mcdi_to_ethtool_media(u32 media) static int efx_mcdi_phy_probe(struct efx_nic *efx) { - struct efx_mcdi_phy_cfg *phy_cfg; + struct efx_mcdi_phy_cfg *phy_data; + u8 outbuf[MC_CMD_GET_LINK_OUT_LEN]; + u32 caps; int rc; - /* TODO: Move phy_data initialisation to - * phy_op->probe/remove, rather than init/fini */ - phy_cfg = kzalloc(sizeof(*phy_cfg), GFP_KERNEL); - if (phy_cfg == NULL) { - rc = -ENOMEM; - goto fail_alloc; - } - rc = efx_mcdi_get_phy_cfg(efx, phy_cfg); + /* Initialise and populate phy_data */ + phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); + if (phy_data == NULL) + return -ENOMEM; + + rc = efx_mcdi_get_phy_cfg(efx, phy_data); if (rc != 0) goto fail; - efx->phy_type = phy_cfg->type; + /* Read initial link advertisement */ + BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0); + rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0, + outbuf, sizeof(outbuf), NULL); + if (rc) + goto fail; - efx->mdio_bus = phy_cfg->channel; - efx->mdio.prtad = phy_cfg->port; - efx->mdio.mmds = phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22); + /* Fill out nic state */ + efx->phy_data = phy_data; + efx->phy_type = phy_data->type; + + efx->mdio_bus = phy_data->channel; + efx->mdio.prtad = phy_data->port; + efx->mdio.mmds = phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22); efx->mdio.mode_support = 0; - if (phy_cfg->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22)) + if (phy_data->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22)) efx->mdio.mode_support |= MDIO_SUPPORTS_C22; - if (phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22)) + if (phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22)) efx->mdio.mode_support |= MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; + caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP); + if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN)) + efx->link_advertising = + mcdi_to_ethtool_cap(phy_data->media, caps); + else + phy_data->forced_cap = caps; + /* Assert that we can map efx -> mcdi loopback modes */ BUILD_BUG_ON(LOOPBACK_NONE != MC_CMD_LOOPBACK_NONE); BUILD_BUG_ON(LOOPBACK_DATA != MC_CMD_LOOPBACK_DATA); @@ -365,46 +381,6 @@ static int efx_mcdi_phy_probe(struct efx_nic *efx) * but by convention we don't */ efx->loopback_modes &= ~(1 << LOOPBACK_NONE); - kfree(phy_cfg); - - return 0; - -fail: - kfree(phy_cfg); -fail_alloc: - return rc; -} - -static int efx_mcdi_phy_init(struct efx_nic *efx) -{ - struct efx_mcdi_phy_cfg *phy_data; - u8 outbuf[MC_CMD_GET_LINK_OUT_LEN]; - u32 caps; - int rc; - - phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); - if (phy_data == NULL) - return -ENOMEM; - - rc = efx_mcdi_get_phy_cfg(efx, phy_data); - if (rc != 0) - goto fail; - - efx->phy_data = phy_data; - - BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0); - rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0, - outbuf, sizeof(outbuf), NULL); - if (rc) - goto fail; - - caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP); - if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN)) - efx->link_advertising = - mcdi_to_ethtool_cap(phy_data->media, caps); - else - phy_data->forced_cap = caps; - return 0; fail: @@ -504,7 +480,7 @@ static bool efx_mcdi_phy_poll(struct efx_nic *efx) return !efx_link_state_equal(&efx->link_state, &old_state); } -static void efx_mcdi_phy_fini(struct efx_nic *efx) +static void efx_mcdi_phy_remove(struct efx_nic *efx) { struct efx_mcdi_phy_data *phy_data = efx->phy_data; @@ -586,10 +562,11 @@ static int efx_mcdi_phy_set_settings(struct efx_nic *efx, struct ethtool_cmd *ec struct efx_phy_operations efx_mcdi_phy_ops = { .probe = efx_mcdi_phy_probe, - .init = efx_mcdi_phy_init, + .init = efx_port_dummy_op_int, .reconfigure = efx_mcdi_phy_reconfigure, .poll = efx_mcdi_phy_poll, - .fini = efx_mcdi_phy_fini, + .fini = efx_port_dummy_op_void, + .remove = efx_mcdi_phy_remove, .get_settings = efx_mcdi_phy_get_settings, .set_settings = efx_mcdi_phy_set_settings, .run_tests = NULL, diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 34c381f009b7..d5aab5b3fa06 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -524,6 +524,7 @@ struct efx_phy_operations { int (*probe) (struct efx_nic *efx); int (*init) (struct efx_nic *efx); void (*fini) (struct efx_nic *efx); + void (*remove) (struct efx_nic *efx); int (*reconfigure) (struct efx_nic *efx); bool (*poll) (struct efx_nic *efx); void (*get_settings) (struct efx_nic *efx, diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index 3800fc791b2f..7450e3afbf4d 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -137,6 +137,14 @@ static int qt202x_reset_phy(struct efx_nic *efx) static int qt202x_phy_probe(struct efx_nic *efx) { + struct qt202x_phy_data *phy_data; + + phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL); + if (!phy_data) + return -ENOMEM; + efx->phy_data = phy_data; + phy_data->phy_mode = efx->phy_mode; + efx->mdio.mmds = QT202X_REQUIRED_DEVS; efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; efx->loopback_modes = QT202X_LOOPBACKS | FALCON_XMAC_LOOPBACKS; @@ -145,7 +153,6 @@ static int qt202x_phy_probe(struct efx_nic *efx) static int qt202x_phy_init(struct efx_nic *efx) { - struct qt202x_phy_data *phy_data; u32 devid; int rc; @@ -155,17 +162,11 @@ static int qt202x_phy_init(struct efx_nic *efx) return rc; } - phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL); - if (!phy_data) - return -ENOMEM; - efx->phy_data = phy_data; - devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS); EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n", devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid), efx_mdio_id_rev(devid)); - phy_data->phy_mode = efx->phy_mode; return 0; } @@ -224,7 +225,7 @@ static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecm mdio45_ethtool_gset(&efx->mdio, ecmd); } -static void qt202x_phy_fini(struct efx_nic *efx) +static void qt202x_phy_remove(struct efx_nic *efx) { /* Free the context block */ kfree(efx->phy_data); @@ -236,7 +237,8 @@ struct efx_phy_operations falcon_qt202x_phy_ops = { .init = qt202x_phy_init, .reconfigure = qt202x_phy_reconfigure, .poll = qt202x_phy_poll, - .fini = qt202x_phy_fini, + .fini = efx_port_dummy_op_void, + .remove = qt202x_phy_remove, .get_settings = qt202x_phy_get_settings, .set_settings = efx_mdio_set_settings, }; diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c index de07a4f031b2..f8c6771e66d8 100644 --- a/drivers/net/sfc/siena.c +++ b/drivers/net/sfc/siena.c @@ -133,6 +133,7 @@ static int siena_probe_port(struct efx_nic *efx) void siena_remove_port(struct efx_nic *efx) { + efx->phy_op->remove(efx); efx_nic_free_buffer(efx, &efx->stats_buffer); } diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index ca11572a49a9..3009c297c135 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -202,10 +202,14 @@ static ssize_t set_phy_short_reach(struct device *dev, int rc; rtnl_lock(); - efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR, - MDIO_PMA_10GBT_TXPWR_SHORT, - count != 0 && *buf != '0'); - rc = efx_reconfigure_port(efx); + if (efx->state != STATE_RUNNING) { + rc = -EBUSY; + } else { + efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR, + MDIO_PMA_10GBT_TXPWR_SHORT, + count != 0 && *buf != '0'); + rc = efx_reconfigure_port(efx); + } rtnl_unlock(); return rc < 0 ? rc : (ssize_t)count; @@ -298,36 +302,62 @@ static int tenxpress_init(struct efx_nic *efx) return 0; } -static int sfx7101_phy_probe(struct efx_nic *efx) -{ - efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; - efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; - efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS; - return 0; -} - -static int sft9001_phy_probe(struct efx_nic *efx) -{ - efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; - efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; - efx->loopback_modes = (SFT9001_LOOPBACKS | FALCON_XMAC_LOOPBACKS | - FALCON_GMAC_LOOPBACKS); - return 0; -} - -static int tenxpress_phy_init(struct efx_nic *efx) +static int tenxpress_phy_probe(struct efx_nic *efx) { struct tenxpress_phy_data *phy_data; - int rc = 0; - - falcon_board(efx)->type->init_phy(efx); + int rc; + /* Allocate phy private storage */ phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); if (!phy_data) return -ENOMEM; efx->phy_data = phy_data; phy_data->phy_mode = efx->phy_mode; + /* Create any special files */ + if (efx->phy_type == PHY_TYPE_SFT9001B) { + rc = device_create_file(&efx->pci_dev->dev, + &dev_attr_phy_short_reach); + if (rc) + goto fail; + } + + if (efx->phy_type == PHY_TYPE_SFX7101) { + efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; + efx->mdio.mode_support = MDIO_SUPPORTS_C45; + + efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS; + + efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | + ADVERTISED_10000baseT_Full); + } else { + efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; + efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; + + efx->loopback_modes = (SFT9001_LOOPBACKS | + FALCON_XMAC_LOOPBACKS | + FALCON_GMAC_LOOPBACKS); + + efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | + ADVERTISED_10000baseT_Full | + ADVERTISED_1000baseT_Full | + ADVERTISED_100baseT_Full); + } + + return 0; + +fail: + kfree(efx->phy_data); + efx->phy_data = NULL; + return rc; +} + +static int tenxpress_phy_init(struct efx_nic *efx) +{ + int rc; + + falcon_board(efx)->type->init_phy(efx); + if (!(efx->phy_mode & PHY_MODE_SPECIAL)) { if (efx->phy_type == PHY_TYPE_SFT9001A) { int reg; @@ -341,44 +371,27 @@ static int tenxpress_phy_init(struct efx_nic *efx) rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); if (rc < 0) - goto fail; + return rc; rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0); if (rc < 0) - goto fail; + return rc; } rc = tenxpress_init(efx); if (rc < 0) - goto fail; + return rc; - /* Initialise advertising flags */ - efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | - ADVERTISED_10000baseT_Full); - if (efx->phy_type != PHY_TYPE_SFX7101) - efx->link_advertising |= (ADVERTISED_1000baseT_Full | - ADVERTISED_100baseT_Full); + /* Reinitialise flow control settings */ efx_link_set_wanted_fc(efx, efx->wanted_fc); efx_mdio_an_reconfigure(efx); - if (efx->phy_type == PHY_TYPE_SFT9001B) { - rc = device_create_file(&efx->pci_dev->dev, - &dev_attr_phy_short_reach); - if (rc) - goto fail; - } - schedule_timeout_uninterruptible(HZ / 5); /* 200ms */ /* Let XGXS and SerDes out of reset */ falcon_reset_xaui(efx); return 0; - - fail: - kfree(efx->phy_data); - efx->phy_data = NULL; - return rc; } /* Perform a "special software reset" on the PHY. The caller is @@ -589,25 +602,26 @@ static bool tenxpress_phy_poll(struct efx_nic *efx) return !efx_link_state_equal(&efx->link_state, &old_state); } -static void tenxpress_phy_fini(struct efx_nic *efx) +static void sfx7101_phy_fini(struct efx_nic *efx) { int reg; + /* Power down the LNPGA */ + reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN); + efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); + + /* Waiting here ensures that the board fini, which can turn + * off the power to the PHY, won't get run until the LNPGA + * powerdown has been given long enough to complete. */ + schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */ +} + +static void tenxpress_phy_remove(struct efx_nic *efx) +{ if (efx->phy_type == PHY_TYPE_SFT9001B) device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_short_reach); - if (efx->phy_type == PHY_TYPE_SFX7101) { - /* Power down the LNPGA */ - reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN); - efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); - - /* Waiting here ensures that the board fini, which can turn - * off the power to the PHY, won't get run until the LNPGA - * powerdown has been given long enough to complete. */ - schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */ - } - kfree(efx->phy_data); efx->phy_data = NULL; } @@ -819,11 +833,12 @@ static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising) } struct efx_phy_operations falcon_sfx7101_phy_ops = { - .probe = sfx7101_phy_probe, + .probe = tenxpress_phy_probe, .init = tenxpress_phy_init, .reconfigure = tenxpress_phy_reconfigure, .poll = tenxpress_phy_poll, - .fini = tenxpress_phy_fini, + .fini = sfx7101_phy_fini, + .remove = tenxpress_phy_remove, .get_settings = tenxpress_get_settings, .set_settings = tenxpress_set_settings, .set_npage_adv = sfx7101_set_npage_adv, @@ -832,11 +847,12 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = { }; struct efx_phy_operations falcon_sft9001_phy_ops = { - .probe = sft9001_phy_probe, + .probe = tenxpress_phy_probe, .init = tenxpress_phy_init, .reconfigure = tenxpress_phy_reconfigure, .poll = tenxpress_phy_poll, - .fini = tenxpress_phy_fini, + .fini = efx_port_dummy_op_void, + .remove = tenxpress_phy_remove, .get_settings = tenxpress_get_settings, .set_settings = tenxpress_set_settings, .set_npage_adv = sft9001_set_npage_adv, From a355020af415947c7dee7e00a91360d11b6a9b47 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 23 Dec 2009 13:46:47 +0000 Subject: [PATCH 0105/1626] sfc: Include XGXS in XMAC link status check except in XGMII loopback The XGXS block may not get a link immediately in XGXS or XAUI loopback modes, so we still need to check it. Split falcon_xaui_link_ok() into falcon_xgxs_link_ok(), which checks only the Falcon XGXS block, and falcon_xmac_link_ok(), which checks one or both sides of the link as appropriate. Also rename falcon_check_xaui_link() to falcon_xmac_link_ok_retry(). Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/falcon_xmac.c | 38 ++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 16 deletions(-) diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c index 3da933f8f079..8ccab2c67a20 100644 --- a/drivers/net/sfc/falcon_xmac.c +++ b/drivers/net/sfc/falcon_xmac.c @@ -111,16 +111,12 @@ static void falcon_mask_status_intr(struct efx_nic *efx, bool enable) efx_writeo(efx, ®, FR_AB_XM_MGT_INT_MASK); } -/* Get status of XAUI link */ -static bool falcon_xaui_link_ok(struct efx_nic *efx) +static bool falcon_xgxs_link_ok(struct efx_nic *efx) { efx_oword_t reg; bool align_done, link_ok = false; int sync_status; - if (LOOPBACK_INTERNAL(efx)) - return true; - /* Read link status */ efx_reado(efx, ®, FR_AB_XX_CORE_STAT); @@ -135,14 +131,24 @@ static bool falcon_xaui_link_ok(struct efx_nic *efx) EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_DISPERR, FFE_AB_XX_STAT_ALL_LANES); efx_writeo(efx, ®, FR_AB_XX_CORE_STAT); - /* If the link is up, then check the phy side of the xaui link */ - if (efx->link_state.up && link_ok) - if (efx->mdio.mmds & (1 << MDIO_MMD_PHYXS)) - link_ok = efx_mdio_phyxgxs_lane_sync(efx); - return link_ok; } +static bool falcon_xmac_link_ok(struct efx_nic *efx) +{ + /* + * Check MAC's XGXS link status except when using XGMII loopback + * which bypasses the XGXS block. + * If possible, check PHY's XGXS link status except when using + * MAC loopback. + */ + return (efx->loopback_mode == LOOPBACK_XGMII || + falcon_xgxs_link_ok(efx)) && + (!(efx->mdio.mmds & (1 << MDIO_MMD_PHYXS)) || + LOOPBACK_INTERNAL(efx) || + efx_mdio_phyxgxs_lane_sync(efx)); +} + void falcon_reconfigure_xmac_core(struct efx_nic *efx) { unsigned int max_frame_len; @@ -245,9 +251,9 @@ static void falcon_reconfigure_xgxs_core(struct efx_nic *efx) /* Try to bring up the Falcon side of the Falcon-Phy XAUI link */ -static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries) +static bool falcon_xmac_link_ok_retry(struct efx_nic *efx, int tries) { - bool mac_up = falcon_xaui_link_ok(efx); + bool mac_up = falcon_xmac_link_ok(efx); if (LOOPBACK_MASK(efx) & LOOPBACKS_EXTERNAL(efx) & LOOPBACKS_WS || efx_phy_mode_disabled(efx->phy_mode)) @@ -261,7 +267,7 @@ static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries) falcon_reset_xaui(efx); udelay(200); - mac_up = falcon_xaui_link_ok(efx); + mac_up = falcon_xmac_link_ok(efx); --tries; } @@ -272,7 +278,7 @@ static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries) static bool falcon_xmac_check_fault(struct efx_nic *efx) { - return !falcon_check_xaui_link_up(efx, 5); + return !falcon_xmac_link_ok_retry(efx, 5); } static int falcon_reconfigure_xmac(struct efx_nic *efx) @@ -284,7 +290,7 @@ static int falcon_reconfigure_xmac(struct efx_nic *efx) falcon_reconfigure_mac_wrapper(efx); - efx->xmac_poll_required = !falcon_check_xaui_link_up(efx, 5); + efx->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 5); falcon_mask_status_intr(efx, true); return 0; @@ -357,7 +363,7 @@ void falcon_poll_xmac(struct efx_nic *efx) return; falcon_mask_status_intr(efx, false); - efx->xmac_poll_required = !falcon_check_xaui_link_up(efx, 1); + efx->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 1); falcon_mask_status_intr(efx, true); } From a7ebd27a13757248863cd61e541af7fa9e7727ee Mon Sep 17 00:00:00 2001 From: Neil Turton Date: Wed, 23 Dec 2009 13:47:13 +0000 Subject: [PATCH 0106/1626] sfc: Fix DMA mapping cleanup in case of an error in TSO We need buffer->len to remain valid to work out the correct address to be unmapped. We therefore need to clear buffer->len after the unmap operation. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/tx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c index e669f94e821b..a8b70ef6d817 100644 --- a/drivers/net/sfc/tx.c +++ b/drivers/net/sfc/tx.c @@ -821,8 +821,6 @@ static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue) EFX_TXQ_MASK]; efx_tsoh_free(tx_queue, buffer); EFX_BUG_ON_PARANOID(buffer->skb); - buffer->len = 0; - buffer->continuation = true; if (buffer->unmap_len) { unmap_addr = (buffer->dma_addr + buffer->len - buffer->unmap_len); @@ -836,6 +834,8 @@ static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue) PCI_DMA_TODEVICE); buffer->unmap_len = 0; } + buffer->len = 0; + buffer->continuation = true; } } From 17d6aeafe9d8268612d91edc0102659edb382282 Mon Sep 17 00:00:00 2001 From: Matthew Slattery Date: Wed, 23 Dec 2009 13:47:37 +0000 Subject: [PATCH 0107/1626] sfc: QT2025C: Work around PHY bug If we see the PHY remaining stuck in a link-down state due to PCS being down while PMA/PMD is up, we briefly switch to PMA/PMD loopback and back, which usually unsticks it. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/qt202x_phy.c | 42 ++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index 7450e3afbf4d..e4590fb528a1 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -52,11 +52,15 @@ void falcon_qt202x_set_led(struct efx_nic *p, int led, int mode) struct qt202x_phy_data { enum efx_phy_mode phy_mode; + bool bug17190_in_bad_state; + unsigned long bug17190_timer; }; #define QT2022C2_MAX_RESET_TIME 500 #define QT2022C2_RESET_WAIT 10 +#define BUG17190_INTERVAL (2 * HZ) + static int qt2025c_wait_reset(struct efx_nic *efx) { unsigned long timeout = jiffies + 10 * HZ; @@ -96,6 +100,39 @@ static int qt2025c_wait_reset(struct efx_nic *efx) return 0; } +static void qt2025c_bug17190_workaround(struct efx_nic *efx) +{ + struct qt202x_phy_data *phy_data = efx->phy_data; + + /* The PHY can get stuck in a state where it reports PHY_XS and PMA/PMD + * layers up, but PCS down (no block_lock). If we notice this state + * persisting for a couple of seconds, we switch PMA/PMD loopback + * briefly on and then off again, which is normally sufficient to + * recover it. + */ + if (efx->link_state.up || + !efx_mdio_links_ok(efx, MDIO_DEVS_PMAPMD | MDIO_DEVS_PHYXS)) { + phy_data->bug17190_in_bad_state = false; + return; + } + + if (!phy_data->bug17190_in_bad_state) { + phy_data->bug17190_in_bad_state = true; + phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL; + return; + } + + if (time_after_eq(jiffies, phy_data->bug17190_timer)) { + EFX_LOG(efx, "bashing QT2025C PMA/PMD\n"); + efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1, + MDIO_PMA_CTRL1_LOOPBACK, true); + msleep(100); + efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1, + MDIO_PMA_CTRL1_LOOPBACK, false); + phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL; + } +} + static int qt202x_reset_phy(struct efx_nic *efx) { int rc; @@ -144,6 +181,8 @@ static int qt202x_phy_probe(struct efx_nic *efx) return -ENOMEM; efx->phy_data = phy_data; phy_data->phy_mode = efx->phy_mode; + phy_data->bug17190_in_bad_state = false; + phy_data->bug17190_timer = 0; efx->mdio.mmds = QT202X_REQUIRED_DEVS; efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; @@ -184,6 +223,9 @@ static bool qt202x_phy_poll(struct efx_nic *efx) efx->link_state.fd = true; efx->link_state.fc = efx->wanted_fc; + if (efx->phy_type == PHY_TYPE_QT2025C) + qt2025c_bug17190_workaround(efx); + return efx->link_state.up != was_up; } From 0d83b2f64c330ee3892cb3117ac5d56e97185ecf Mon Sep 17 00:00:00 2001 From: Matthew Slattery Date: Wed, 23 Dec 2009 13:48:04 +0000 Subject: [PATCH 0108/1626] sfc: QT2025C: Switch into self-configure mode when not in loopback The PHY boots in a mode which is not necessarily optimal. This change switches it to self-configure mode (except when in loopback, which won't work in that mode if an SFP+ module is not present) by rebooting the PHY's microcontroller, and replicating the sequence of configuration writes from the boot EEPROM with the appropriate changes. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/qt202x_phy.c | 119 +++++++++++++++++++++++++++++++++++ 1 file changed, 119 insertions(+) diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index e4590fb528a1..0cd6eed02069 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -33,6 +33,9 @@ #define PCS_FW_HEARTBEAT_REG 0xd7ee #define PCS_FW_HEARTB_LBN 0 #define PCS_FW_HEARTB_WIDTH 8 +#define PCS_FW_PRODUCT_CODE_1 0xd7f0 +#define PCS_FW_VERSION_1 0xd7f3 +#define PCS_FW_BUILD_1 0xd7f6 #define PCS_UC8051_STATUS_REG 0xd7fd #define PCS_UC_STATUS_LBN 0 #define PCS_UC_STATUS_WIDTH 8 @@ -54,6 +57,7 @@ struct qt202x_phy_data { enum efx_phy_mode phy_mode; bool bug17190_in_bad_state; unsigned long bug17190_timer; + u32 firmware_ver; }; #define QT2022C2_MAX_RESET_TIME 500 @@ -100,6 +104,25 @@ static int qt2025c_wait_reset(struct efx_nic *efx) return 0; } +static void qt2025c_firmware_id(struct efx_nic *efx) +{ + struct qt202x_phy_data *phy_data = efx->phy_data; + u8 firmware_id[9]; + size_t i; + + for (i = 0; i < sizeof(firmware_id); i++) + firmware_id[i] = efx_mdio_read(efx, MDIO_MMD_PCS, + PCS_FW_PRODUCT_CODE_1 + i); + EFX_INFO(efx, "QT2025C firmware %xr%d v%d.%d.%d.%d [20%02d-%02d-%02d]\n", + (firmware_id[0] << 8) | firmware_id[1], firmware_id[2], + firmware_id[3] >> 4, firmware_id[3] & 0xf, + firmware_id[4], firmware_id[5], + firmware_id[6], firmware_id[7], firmware_id[8]); + phy_data->firmware_ver = ((firmware_id[3] & 0xf0) << 20) | + ((firmware_id[3] & 0x0f) << 16) | + (firmware_id[4] << 8) | firmware_id[5]; +} + static void qt2025c_bug17190_workaround(struct efx_nic *efx) { struct qt202x_phy_data *phy_data = efx->phy_data; @@ -133,6 +156,95 @@ static void qt2025c_bug17190_workaround(struct efx_nic *efx) } } +static int qt2025c_select_phy_mode(struct efx_nic *efx) +{ + struct qt202x_phy_data *phy_data = efx->phy_data; + struct falcon_board *board = falcon_board(efx); + int reg, rc, i; + uint16_t phy_op_mode; + + /* Only 2.0.1.0+ PHY firmware supports the more optimal SFP+ + * Self-Configure mode. Don't attempt any switching if we encounter + * older firmware. */ + if (phy_data->firmware_ver < 0x02000100) + return 0; + + /* In general we will get optimal behaviour in "SFP+ Self-Configure" + * mode; however, that powers down most of the PHY when no module is + * present, so we must use a different mode (any fixed mode will do) + * to be sure that loopbacks will work. */ + phy_op_mode = (efx->loopback_mode == LOOPBACK_NONE) ? 0x0038 : 0x0020; + + /* Only change mode if really necessary */ + reg = efx_mdio_read(efx, 1, 0xc319); + if ((reg & 0x0038) == phy_op_mode) + return 0; + EFX_LOG(efx, "Switching PHY to mode 0x%04x\n", phy_op_mode); + + /* This sequence replicates the register writes configured in the boot + * EEPROM (including the differences between board revisions), except + * that the operating mode is changed, and the PHY is prevented from + * unnecessarily reloading the main firmware image again. */ + efx_mdio_write(efx, 1, 0xc300, 0x0000); + /* (Note: this portion of the boot EEPROM sequence, which bit-bashes 9 + * STOPs onto the firmware/module I2C bus to reset it, varies across + * board revisions, as the bus is connected to different GPIO/LED + * outputs on the PHY.) */ + if (board->major == 0 && board->minor < 2) { + efx_mdio_write(efx, 1, 0xc303, 0x4498); + for (i = 0; i < 9; i++) { + efx_mdio_write(efx, 1, 0xc303, 0x4488); + efx_mdio_write(efx, 1, 0xc303, 0x4480); + efx_mdio_write(efx, 1, 0xc303, 0x4490); + efx_mdio_write(efx, 1, 0xc303, 0x4498); + } + } else { + efx_mdio_write(efx, 1, 0xc303, 0x0920); + efx_mdio_write(efx, 1, 0xd008, 0x0004); + for (i = 0; i < 9; i++) { + efx_mdio_write(efx, 1, 0xc303, 0x0900); + efx_mdio_write(efx, 1, 0xd008, 0x0005); + efx_mdio_write(efx, 1, 0xc303, 0x0920); + efx_mdio_write(efx, 1, 0xd008, 0x0004); + } + efx_mdio_write(efx, 1, 0xc303, 0x4900); + } + efx_mdio_write(efx, 1, 0xc303, 0x4900); + efx_mdio_write(efx, 1, 0xc302, 0x0004); + efx_mdio_write(efx, 1, 0xc316, 0x0013); + efx_mdio_write(efx, 1, 0xc318, 0x0054); + efx_mdio_write(efx, 1, 0xc319, phy_op_mode); + efx_mdio_write(efx, 1, 0xc31a, 0x0098); + efx_mdio_write(efx, 3, 0x0026, 0x0e00); + efx_mdio_write(efx, 3, 0x0027, 0x0013); + efx_mdio_write(efx, 3, 0x0028, 0xa528); + efx_mdio_write(efx, 1, 0xd006, 0x000a); + efx_mdio_write(efx, 1, 0xd007, 0x0009); + efx_mdio_write(efx, 1, 0xd008, 0x0004); + /* This additional write is not present in the boot EEPROM. It + * prevents the PHY's internal boot ROM doing another pointless (and + * slow) reload of the firmware image (the microcontroller's code + * memory is not affected by the microcontroller reset). */ + efx_mdio_write(efx, 1, 0xc317, 0x00ff); + efx_mdio_write(efx, 1, 0xc300, 0x0002); + msleep(20); + + /* Restart microcontroller execution from RAM */ + efx_mdio_write(efx, 3, 0xe854, 0x00c0); + efx_mdio_write(efx, 3, 0xe854, 0x0040); + msleep(50); + + /* Wait for the microcontroller to be ready again */ + rc = qt2025c_wait_reset(efx); + if (rc < 0) { + EFX_ERR(efx, "PHY microcontroller reset during mode switch " + "timed out\n"); + return rc; + } + + return 0; +} + static int qt202x_reset_phy(struct efx_nic *efx) { int rc; @@ -206,6 +318,9 @@ static int qt202x_phy_init(struct efx_nic *efx) devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid), efx_mdio_id_rev(devid)); + if (efx->phy_type == PHY_TYPE_QT2025C) + qt2025c_firmware_id(efx); + return 0; } @@ -234,6 +349,10 @@ static int qt202x_phy_reconfigure(struct efx_nic *efx) struct qt202x_phy_data *phy_data = efx->phy_data; if (efx->phy_type == PHY_TYPE_QT2025C) { + int rc = qt2025c_select_phy_mode(efx); + if (rc) + return rc; + /* There are several different register bits which can * disable TX (and save power) on direct-attach cables * or optical transceivers, varying somewhat between From 1a1284ef97ca79ba747d211b697e996a248a8555 Mon Sep 17 00:00:00 2001 From: Matthew Slattery Date: Wed, 23 Dec 2009 13:48:32 +0000 Subject: [PATCH 0109/1626] sfc: QT2025C: Work around PHY firmware initialisation bug The PHY's firmware very occasionally appears to lock up very early, but with the heartbeat update still running. Rebooting the microcontroller core seems to be sufficient to recover. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/qt202x_phy.c | 59 +++++++++++++++++++++++++++++++----- 1 file changed, 51 insertions(+), 8 deletions(-) diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index 0cd6eed02069..326ffa49fbd2 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -63,11 +63,16 @@ struct qt202x_phy_data { #define QT2022C2_MAX_RESET_TIME 500 #define QT2022C2_RESET_WAIT 10 +#define QT2025C_MAX_HEARTB_TIME (5 * HZ) +#define QT2025C_HEARTB_WAIT 100 +#define QT2025C_MAX_FWSTART_TIME (25 * HZ / 10) +#define QT2025C_FWSTART_WAIT 100 + #define BUG17190_INTERVAL (2 * HZ) -static int qt2025c_wait_reset(struct efx_nic *efx) +static int qt2025c_wait_heartbeat(struct efx_nic *efx) { - unsigned long timeout = jiffies + 10 * HZ; + unsigned long timeout = jiffies + QT2025C_MAX_HEARTB_TIME; int reg, old_counter = 0; /* Wait for firmware heartbeat to start */ @@ -84,9 +89,17 @@ static int qt2025c_wait_reset(struct efx_nic *efx) break; if (time_after(jiffies, timeout)) return -ETIMEDOUT; - msleep(10); + msleep(QT2025C_HEARTB_WAIT); } + return 0; +} + +static int qt2025c_wait_fw_status_good(struct efx_nic *efx) +{ + unsigned long timeout = jiffies + QT2025C_MAX_FWSTART_TIME; + int reg; + /* Wait for firmware status to look good */ for (;;) { reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG); @@ -98,12 +111,44 @@ static int qt2025c_wait_reset(struct efx_nic *efx) break; if (time_after(jiffies, timeout)) return -ETIMEDOUT; - msleep(100); + msleep(QT2025C_FWSTART_WAIT); } return 0; } +static void qt2025c_restart_firmware(struct efx_nic *efx) +{ + /* Restart microcontroller execution of firmware from RAM */ + efx_mdio_write(efx, 3, 0xe854, 0x00c0); + efx_mdio_write(efx, 3, 0xe854, 0x0040); + msleep(50); +} + +static int qt2025c_wait_reset(struct efx_nic *efx) +{ + int rc; + + rc = qt2025c_wait_heartbeat(efx); + if (rc != 0) + return rc; + + rc = qt2025c_wait_fw_status_good(efx); + if (rc == -ETIMEDOUT) { + /* Bug 17689: occasionally heartbeat starts but firmware status + * code never progresses beyond 0x00. Try again, once, after + * restarting execution of the firmware image. */ + EFX_LOG(efx, "bashing QT2025C microcontroller\n"); + qt2025c_restart_firmware(efx); + rc = qt2025c_wait_heartbeat(efx); + if (rc != 0) + return rc; + rc = qt2025c_wait_fw_status_good(efx); + } + + return rc; +} + static void qt2025c_firmware_id(struct efx_nic *efx) { struct qt202x_phy_data *phy_data = efx->phy_data; @@ -229,10 +274,8 @@ static int qt2025c_select_phy_mode(struct efx_nic *efx) efx_mdio_write(efx, 1, 0xc300, 0x0002); msleep(20); - /* Restart microcontroller execution from RAM */ - efx_mdio_write(efx, 3, 0xe854, 0x00c0); - efx_mdio_write(efx, 3, 0xe854, 0x0040); - msleep(50); + /* Restart microcontroller execution of firmware from RAM */ + qt2025c_restart_firmware(efx); /* Wait for the microcontroller to be ready again */ rc = qt2025c_wait_reset(efx); From 50d6ec552bdd4d9227fe9ed2bac819eced3170ac Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 23 Dec 2009 13:48:42 +0000 Subject: [PATCH 0110/1626] sfc: QT2025C: Add error message for suspected bad SFP+ cables Some cables have EEPROMs that conflict with the PHY's on-board EEPROM so it cannot load firmware. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/qt202x_phy.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index 326ffa49fbd2..ff8f0a417fa3 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -87,8 +87,14 @@ static int qt2025c_wait_heartbeat(struct efx_nic *efx) old_counter = counter; else if (counter != old_counter) break; - if (time_after(jiffies, timeout)) + if (time_after(jiffies, timeout)) { + /* Some cables have EEPROMs that conflict with the + * PHY's on-board EEPROM so it cannot load firmware */ + EFX_ERR(efx, "If an SFP+ direct attach cable is" + " connected, please check that it complies" + " with the SFP+ specification\n"); return -ETIMEDOUT; + } msleep(QT2025C_HEARTB_WAIT); } From 286d47ba90315a871f77351f7f61b7e4a96476a9 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 23 Dec 2009 13:49:13 +0000 Subject: [PATCH 0111/1626] sfc: Disable TX descriptor prefetch watchdog This hardware watchdog can misfire, so it does more harm than good. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/nic.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c index a577be227862..db44224ed2ca 100644 --- a/drivers/net/sfc/nic.c +++ b/drivers/net/sfc/nic.c @@ -1576,6 +1576,8 @@ void efx_nic_init_common(struct efx_nic *efx) EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_SOFT_EVT_EN, 1); /* Prefetch threshold 2 => fetch when descriptor cache half empty */ EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PREF_THRESHOLD, 2); + /* Disable hardware watchdog which can misfire */ + EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PREF_WD_TMR, 0x3fffff); /* Squash TX of packets of 16 bytes or less */ if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) EFX_SET_OWORD_FIELD(temp, FRF_BZ_TX_FLUSH_MIN_LEN_EN, 1); From d68caec645b4b92f6a81985265b024bc94bce41f Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 23 Dec 2009 13:20:47 +0000 Subject: [PATCH 0112/1626] igb: do not force pcs link when in KX mode We were forcing the PCS link up in error when we are in KX mode. We should only be disabling autoneg, not forcing the link up. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/e1000_82575.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index e8e9e9194a88..c505b50d1fa3 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -1096,9 +1096,7 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg); } else { /* Set PCS register for forced link */ - reg |= E1000_PCS_LCTL_FSD | /* Force Speed */ - E1000_PCS_LCTL_FORCE_LINK | /* Force Link */ - E1000_PCS_LCTL_FLV_LINK_UP; /* Force link value up */ + reg |= E1000_PCS_LCTL_FSD; /* Force Speed */ hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg); } From 8c6af2995c14e71558c312b86955ae32272a03d8 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 23 Dec 2009 13:21:07 +0000 Subject: [PATCH 0113/1626] igb: do not force retry count to 1 on 82580 phy This change resolves an issue seen in some configurations where the link may drop to 100Mb/s even though the link itself supports 1000Mb/s. The issue was root caused to the fact that we were only trying the link once. Now instead we will try up to 5 attempts on a faulty cable before downshifting to 100Mb/s. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/e1000_phy.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c index 5c9d73e9bb8d..3670a66401b8 100644 --- a/drivers/net/igb/e1000_phy.c +++ b/drivers/net/igb/e1000_phy.c @@ -457,15 +457,6 @@ s32 igb_copper_link_setup_82580(struct e1000_hw *hw) phy_data |= I82580_CFG_ENABLE_DOWNSHIFT; ret_val = phy->ops.write_reg(hw, I82580_CFG_REG, phy_data); - if (ret_val) - goto out; - - /* Set number of link attempts before downshift */ - ret_val = phy->ops.read_reg(hw, I82580_CTRL_REG, &phy_data); - if (ret_val) - goto out; - phy_data &= ~I82580_CTRL_DOWNSHIFT_MASK; - ret_val = phy->ops.write_reg(hw, I82580_CTRL_REG, phy_data); out: return ret_val; From d405ea3ef2499eb46834418a643973c884ff7f30 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 23 Dec 2009 13:21:27 +0000 Subject: [PATCH 0114/1626] igb: correctly offset 82575 flow control watermarks by 16 bytes The watermark values for the 82575 were not being set correctly. As a result the high and low watermark values were set to the same value which can lead to excess xon/xoff packets being generated. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_main.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 78963a0e128d..933c64ff2465 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1306,13 +1306,8 @@ void igb_reset(struct igb_adapter *adapter) hwm = min(((pba << 10) * 9 / 10), ((pba << 10) - 2 * adapter->max_frame_size)); - if (mac->type < e1000_82576) { - fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */ - fc->low_water = fc->high_water - 8; - } else { - fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */ - fc->low_water = fc->high_water - 16; - } + fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */ + fc->low_water = fc->high_water - 16; fc->pause_time = 0xFFFF; fc->send_xon = 1; fc->current_mode = fc->requested_mode; From 58b8b042509f53955ba660a4245e221c5405f124 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 23 Dec 2009 13:21:46 +0000 Subject: [PATCH 0115/1626] igb: check both function bits in status register in wol exception The ethtool code for enabling Wake on Lan was not correctly checking the status register bits so as a result ports 0 and 2 were both being allowed to set WOL to enabled even though it is only supported on the first port for our adapters. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index ac9d5272650d..f771a6c08777 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -1795,7 +1795,7 @@ static int igb_wol_exclusion(struct igb_adapter *adapter, /* dual port cards only support WoL on port A from now on * unless it was enabled in the eeprom for port B * so exclude FUNC_1 ports from having WoL enabled */ - if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1 && + if ((rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) && !adapter->eeprom_wol) { wol->supported = 0; break; From 1242b6f31e1d0688f1eb1dc78036dbd975bd6140 Mon Sep 17 00:00:00 2001 From: "Williams, Mitch A" Date: Wed, 23 Dec 2009 13:22:43 +0000 Subject: [PATCH 0116/1626] igbvf: Make igbvf error message more informative Signed-off-by: Mitch Williams Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igbvf/netdev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index e9dd95f136aa..0dbd0320023a 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -2763,7 +2763,8 @@ static int __devinit igbvf_probe(struct pci_dev *pdev, err = hw->mac.ops.reset_hw(hw); if (err) { dev_info(&pdev->dev, - "PF still in reset state, assigning new address\n"); + "PF still in reset state, assigning new address." + " Is the PF interface up?\n"); random_ether_addr(hw->mac.addr); } else { err = hw->mac.ops.read_mac_addr(hw); From d7b901418250f00eaaa18f9135d09ba61b72a5bc Mon Sep 17 00:00:00 2001 From: Sarveshwar Bandi Date: Wed, 23 Dec 2009 04:40:36 +0000 Subject: [PATCH 0117/1626] be2net: Bug fix to avoid soft lockup in loopback test. This change ensures that loopback test command gives up after 4 seconds when the hardware is not responsive. This could happen if the ports are connected properly in loopback mode. Signed-off-by: Sarveshwar Bandi Signed-off-by: David S. Miller --- drivers/net/benet/be_cmds.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index 1b68bd98dc0c..a27fdb35eebf 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -1501,6 +1501,7 @@ int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num, be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL, OPCODE_LOWLEVEL_LOOPBACK_TEST, sizeof(*req)); + req->hdr.timeout = 4; req->pattern = cpu_to_le64(pattern); req->src_port = cpu_to_le32(port_num); From fced9999ed7f6975fbb2350a73048918ba60a773 Mon Sep 17 00:00:00 2001 From: Sarveshwar Bandi Date: Wed, 23 Dec 2009 04:41:44 +0000 Subject: [PATCH 0118/1626] be2net: Bug fix to config NIC appropriately before loopback test NIC controller has to be set to an appropriate mode before doing a loopback test. Test will fail otherwise. Signed-off-by: Sarveshwar Bandi Signed-off-by: David S. Miller --- drivers/net/benet/be_cmds.c | 35 ++++++++++++++++++++++++++++++++ drivers/net/benet/be_cmds.h | 16 +++++++++++++++ drivers/net/benet/be_ethtool.c | 37 +++++++++++++++++++++------------- 3 files changed, 74 insertions(+), 14 deletions(-) diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index a27fdb35eebf..102ade134165 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -1479,6 +1479,41 @@ err: return status; } +int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num, + u8 loopback_type, u8 enable) +{ + struct be_mcc_wrb *wrb; + struct be_cmd_req_set_lmode *req; + int status; + + spin_lock_bh(&adapter->mcc_lock); + + wrb = wrb_from_mccq(adapter); + if (!wrb) { + status = -EBUSY; + goto err; + } + + req = embedded_payload(wrb); + + be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0, + OPCODE_LOWLEVEL_SET_LOOPBACK_MODE); + + be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL, + OPCODE_LOWLEVEL_SET_LOOPBACK_MODE, + sizeof(*req)); + + req->src_port = port_num; + req->dest_port = port_num; + req->loopback_type = loopback_type; + req->loopback_state = enable; + + status = be_mcc_notify_wait(adapter); +err: + spin_unlock_bh(&adapter->mcc_lock); + return status; +} + int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num, u32 loopback_type, u32 pkt_size, u32 num_pkts, u64 pattern) { diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index 92b87ef156ed..c002b8391b4d 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -155,6 +155,7 @@ struct be_mcc_mailbox { #define OPCODE_LOWLEVEL_HOST_DDR_DMA 17 #define OPCODE_LOWLEVEL_LOOPBACK_TEST 18 +#define OPCODE_LOWLEVEL_SET_LOOPBACK_MODE 19 struct be_cmd_req_hdr { u8 opcode; /* dword 0 */ @@ -821,6 +822,19 @@ struct be_cmd_resp_loopback_test { u32 ticks_compl; }; +struct be_cmd_req_set_lmode { + struct be_cmd_req_hdr hdr; + u8 src_port; + u8 dest_port; + u8 loopback_type; + u8 loopback_state; +}; + +struct be_cmd_resp_set_lmode { + struct be_cmd_resp_hdr resp_hdr; + u8 rsvd0[4]; +}; + /********************** DDR DMA test *********************/ struct be_cmd_req_ddrdma_test { struct be_cmd_req_hdr hdr; @@ -912,3 +926,5 @@ extern int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num, u32 num_pkts, u64 pattern); extern int be_cmd_ddr_dma_test(struct be_adapter *adapter, u64 pattern, u32 byte_cnt, struct be_dma_mem *cmd); +extern int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num, + u8 loopback_type, u8 enable); diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c index 298b92cbd689..da66d15e2223 100644 --- a/drivers/net/benet/be_ethtool.c +++ b/drivers/net/benet/be_ethtool.c @@ -118,6 +118,7 @@ static const char et_self_tests[][ETH_GSTRING_LEN] = { #define BE_MAC_LOOPBACK 0x0 #define BE_PHY_LOOPBACK 0x1 #define BE_ONE_PORT_EXT_LOOPBACK 0x2 +#define BE_NO_LOOPBACK 0xff static void be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) @@ -489,6 +490,19 @@ err: return ret; } +static u64 be_loopback_test(struct be_adapter *adapter, u8 loopback_type, + u64 *status) +{ + be_cmd_set_loopback(adapter, adapter->port_num, + loopback_type, 1); + *status = be_cmd_loopback_test(adapter, adapter->port_num, + loopback_type, 1500, + 2, 0xabc); + be_cmd_set_loopback(adapter, adapter->port_num, + BE_NO_LOOPBACK, 1); + return *status; +} + static void be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data) { @@ -497,23 +511,18 @@ be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data) memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM); if (test->flags & ETH_TEST_FL_OFFLINE) { - data[0] = be_cmd_loopback_test(adapter, adapter->port_num, - BE_MAC_LOOPBACK, 1500, - 2, 0xabc); - if (data[0] != 0) + if (be_loopback_test(adapter, BE_MAC_LOOPBACK, + &data[0]) != 0) { test->flags |= ETH_TEST_FL_FAILED; - - data[1] = be_cmd_loopback_test(adapter, adapter->port_num, - BE_PHY_LOOPBACK, 1500, - 2, 0xabc); - if (data[1] != 0) + } + if (be_loopback_test(adapter, BE_PHY_LOOPBACK, + &data[1]) != 0) { test->flags |= ETH_TEST_FL_FAILED; - - data[2] = be_cmd_loopback_test(adapter, adapter->port_num, - BE_ONE_PORT_EXT_LOOPBACK, - 1500, 2, 0xabc); - if (data[2] != 0) + } + if (be_loopback_test(adapter, BE_ONE_PORT_EXT_LOOPBACK, + &data[2]) != 0) { test->flags |= ETH_TEST_FL_FAILED; + } data[3] = be_test_ddr_dma(adapter); if (data[3] != 0) From 16c02145902d8597841a25e8443cfb082898a2d7 Mon Sep 17 00:00:00 2001 From: Sarveshwar Bandi Date: Wed, 23 Dec 2009 04:42:51 +0000 Subject: [PATCH 0119/1626] be2net: Bug fix to return correct values in ethtool get_settings. Changes to return correct values for transceiver and supported in ethtool get_settings function. Signed-off-by: Sarveshwar Bandi Signed-off-by: David S. Miller --- drivers/net/benet/be.h | 1 + drivers/net/benet/be_ethtool.c | 40 ++++++++++++++++++++++++++-------- 2 files changed, 32 insertions(+), 9 deletions(-) diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index 9e56014d27ed..9fd8e5ecd5d7 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -275,6 +275,7 @@ struct be_adapter { u32 tx_fc; /* Tx flow control */ int link_speed; u8 port_type; + u8 transceiver; }; extern const struct ethtool_ops be_ethtool_ops; diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c index da66d15e2223..5d001c4deac1 100644 --- a/drivers/net/benet/be_ethtool.c +++ b/drivers/net/benet/be_ethtool.c @@ -340,28 +340,50 @@ static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) status = be_cmd_read_port_type(adapter, adapter->port_num, &connector); - switch (connector) { - case 7: - ecmd->port = PORT_FIBRE; - break; - default: - ecmd->port = PORT_TP; - break; + if (!status) { + switch (connector) { + case 7: + ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_EXTERNAL; + break; + case 0: + ecmd->port = PORT_TP; + ecmd->transceiver = XCVR_EXTERNAL; + break; + default: + ecmd->port = PORT_TP; + ecmd->transceiver = XCVR_INTERNAL; + break; + } + } else { + ecmd->port = PORT_AUI; + ecmd->transceiver = XCVR_INTERNAL; } /* Save for future use */ adapter->link_speed = ecmd->speed; adapter->port_type = ecmd->port; + adapter->transceiver = ecmd->transceiver; } else { ecmd->speed = adapter->link_speed; ecmd->port = adapter->port_type; + ecmd->transceiver = adapter->transceiver; } ecmd->duplex = DUPLEX_FULL; ecmd->autoneg = AUTONEG_DISABLE; - ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP); ecmd->phy_address = adapter->port_num; - ecmd->transceiver = XCVR_INTERNAL; + switch (ecmd->port) { + case PORT_FIBRE: + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE); + break; + case PORT_TP: + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP); + break; + case PORT_AUI: + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_AUI); + break; + } return 0; } From 656ab8172a49d3931e64f866c080260be638c8a9 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Wed, 23 Dec 2009 21:19:19 -0800 Subject: [PATCH 0120/1626] ixgbe: fix Need to call pci_save_state after pci_restore_state This patch adds a pci_save_state() call in ixgbe_resume() after pci_restore_state(). A similar change was made in ixgbe_io_slot_reset() that accommodates pci_restore_state() new behavior. This change makes pci_restore_state() clear the saved_state flag This is necessary due to a resent kernel change to pci_restore_state() so that it now clears the saved_state flag of the device right after the device.s standard configuration registers have been poplulated with the previously saved values. Signed-off-by: Don Skidmore Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index bd64387563f0..1a2ea621e371 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -4373,6 +4373,11 @@ static int ixgbe_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); + /* + * pci_restore_state clears dev->state_saved so call + * pci_save_state to restore it. + */ + pci_save_state(pdev); err = pci_enable_device_mem(pdev); if (err) { From c0d7a0212becebe11ffe6979ee3d6f1c4104568d Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Wed, 23 Dec 2009 21:54:29 -0800 Subject: [PATCH 0121/1626] net/via-rhine: Fix scheduling while atomic bugs There are BUGs "scheduling while atomic" triggered by the timer rhine_tx_timeout(). They are caused by calling napi_disable() (with msleep()). This patch fixes it by moving most of the timer content to the workqueue function (similarly to other drivers, like tg3), with spin_lock() changed to BH version. Additionally, there is spin_lock_irq() moved in rhine_close() to exclude napi_disable() etc., also tg3's way. Reported-by: Andrey Rahmatullin Tested-by: Andrey Rahmatullin Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- drivers/net/via-rhine.c | 41 ++++++++++++++++++++++++++++------------- 1 file changed, 28 insertions(+), 13 deletions(-) diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 593e01f64e9b..611b80435955 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -102,6 +102,7 @@ static const int multicast_filter_limit = 32; #include #include #include +#include #include /* Processor type for cache alignment. */ #include #include @@ -389,6 +390,7 @@ struct rhine_private { struct net_device *dev; struct napi_struct napi; spinlock_t lock; + struct work_struct reset_task; /* Frequently used values: keep some adjacent for cache effect. */ u32 quirks; @@ -407,6 +409,7 @@ struct rhine_private { static int mdio_read(struct net_device *dev, int phy_id, int location); static void mdio_write(struct net_device *dev, int phy_id, int location, int value); static int rhine_open(struct net_device *dev); +static void rhine_reset_task(struct work_struct *work); static void rhine_tx_timeout(struct net_device *dev); static netdev_tx_t rhine_start_tx(struct sk_buff *skb, struct net_device *dev); @@ -775,6 +778,8 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, dev->irq = pdev->irq; spin_lock_init(&rp->lock); + INIT_WORK(&rp->reset_task, rhine_reset_task); + rp->mii_if.dev = dev; rp->mii_if.mdio_read = mdio_read; rp->mii_if.mdio_write = mdio_write; @@ -1179,22 +1184,18 @@ static int rhine_open(struct net_device *dev) return 0; } -static void rhine_tx_timeout(struct net_device *dev) +static void rhine_reset_task(struct work_struct *work) { - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - - printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status " - "%4.4x, resetting...\n", - dev->name, ioread16(ioaddr + IntrStatus), - mdio_read(dev, rp->mii_if.phy_id, MII_BMSR)); + struct rhine_private *rp = container_of(work, struct rhine_private, + reset_task); + struct net_device *dev = rp->dev; /* protect against concurrent rx interrupts */ disable_irq(rp->pdev->irq); napi_disable(&rp->napi); - spin_lock(&rp->lock); + spin_lock_bh(&rp->lock); /* clear all descriptors */ free_tbufs(dev); @@ -1206,7 +1207,7 @@ static void rhine_tx_timeout(struct net_device *dev) rhine_chip_reset(dev); init_registers(dev); - spin_unlock(&rp->lock); + spin_unlock_bh(&rp->lock); enable_irq(rp->pdev->irq); dev->trans_start = jiffies; @@ -1214,6 +1215,19 @@ static void rhine_tx_timeout(struct net_device *dev) netif_wake_queue(dev); } +static void rhine_tx_timeout(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + + printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status " + "%4.4x, resetting...\n", + dev->name, ioread16(ioaddr + IntrStatus), + mdio_read(dev, rp->mii_if.phy_id, MII_BMSR)); + + schedule_work(&rp->reset_task); +} + static netdev_tx_t rhine_start_tx(struct sk_buff *skb, struct net_device *dev) { @@ -1830,10 +1844,11 @@ static int rhine_close(struct net_device *dev) struct rhine_private *rp = netdev_priv(dev); void __iomem *ioaddr = rp->base; - spin_lock_irq(&rp->lock); - - netif_stop_queue(dev); napi_disable(&rp->napi); + cancel_work_sync(&rp->reset_task); + netif_stop_queue(dev); + + spin_lock_irq(&rp->lock); if (debug > 1) printk(KERN_DEBUG "%s: Shutting down ethercard, " From f466dba1832f05006cf6caa9be41fb98d11cb848 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Wed, 23 Dec 2009 22:02:57 -0800 Subject: [PATCH 0122/1626] pktgen: ndo_start_xmit can return NET_XMIT_xxx values This updates pktgen so that it does not decrement skb->users when it receives valid NET_XMIT_xxx values. These are now valid return values from ndo_start_xmit in net-next-2.6. They also indicate the skb has been consumed. This fixes pktgen to work correctly with vlan devices. Signed-off-by: John Fastabend Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- net/core/pktgen.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index a23b45f08ec9..de0c2c726420 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -250,8 +250,7 @@ struct pktgen_dev { __u64 count; /* Default No packets to send */ __u64 sofar; /* How many pkts we've sent so far */ __u64 tx_bytes; /* How many bytes we've transmitted */ - __u64 errors; /* Errors when trying to transmit, - pkts will be re-sent */ + __u64 errors; /* Errors when trying to transmit, */ /* runtime counters relating to clone_skb */ @@ -3465,6 +3464,12 @@ static void pktgen_xmit(struct pktgen_dev *pkt_dev) pkt_dev->seq_num++; pkt_dev->tx_bytes += pkt_dev->last_pkt_size; break; + case NET_XMIT_DROP: + case NET_XMIT_CN: + case NET_XMIT_POLICED: + /* skb has been consumed */ + pkt_dev->errors++; + break; default: /* Drivers are not supposed to return other values! */ if (net_ratelimit()) pr_info("pktgen: %s xmit error: %d\n", From 18f98ab54735f66ea84bf679b70fcec5e8b3df66 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 14 Dec 2009 13:22:04 +0900 Subject: [PATCH 0123/1626] ASoC: fsi-ak4642: Remove ak4642_add_i2c_device I2C devices should be registered when platform board setting in latest ASoC. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/fsi-ak4642.c | 30 ------------------------------ 1 file changed, 30 deletions(-) diff --git a/sound/soc/sh/fsi-ak4642.c b/sound/soc/sh/fsi-ak4642.c index c7af09729c6e..5263ab18f827 100644 --- a/sound/soc/sh/fsi-ak4642.c +++ b/sound/soc/sh/fsi-ak4642.c @@ -42,42 +42,12 @@ static struct snd_soc_device fsi_snd_devdata = { .codec_dev = &soc_codec_dev_ak4642, }; -#define AK4642_BUS 0 -#define AK4642_ADR 0x12 -static int ak4642_add_i2c_device(void) -{ - struct i2c_board_info info; - struct i2c_adapter *adapter; - struct i2c_client *client; - - memset(&info, 0, sizeof(struct i2c_board_info)); - info.addr = AK4642_ADR; - strlcpy(info.type, "ak4642", I2C_NAME_SIZE); - - adapter = i2c_get_adapter(AK4642_BUS); - if (!adapter) { - printk(KERN_DEBUG "can't get i2c adapter\n"); - return -ENODEV; - } - - client = i2c_new_device(adapter, &info); - i2c_put_adapter(adapter); - if (!client) { - printk(KERN_DEBUG "can't add i2c device\n"); - return -ENODEV; - } - - return 0; -} - static struct platform_device *fsi_snd_device; static int __init fsi_ak4642_init(void) { int ret = -ENOMEM; - ak4642_add_i2c_device(); - fsi_snd_device = platform_device_alloc("soc-audio", -1); if (!fsi_snd_device) goto out; From b3172f222ab5afdc91ea058bd11c42cf169728f3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 24 Dec 2009 01:13:51 +0100 Subject: [PATCH 0124/1626] ASoC: fix params_rate() macro use in several codecs Sevelar ASoC codec drivers wrongly assume, that the params_rate() macro returns one of SNDRV_PCM_RATE_* defines instead of the actual numerical sampling rate. Fix them. Signed-off-by: Guennadi Liakhovetski Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm8510.c | 14 +++++++------- sound/soc/codecs/wm8940.c | 14 +++++++------- sound/soc/codecs/wm8974.c | 14 +++++++------- 3 files changed, 21 insertions(+), 21 deletions(-) diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c index 265e68c75df8..af8cb6995a1f 100644 --- a/sound/soc/codecs/wm8510.c +++ b/sound/soc/codecs/wm8510.c @@ -424,23 +424,23 @@ static int wm8510_pcm_hw_params(struct snd_pcm_substream *substream, /* filter coefficient */ switch (params_rate(params)) { - case SNDRV_PCM_RATE_8000: + case 8000: adn |= 0x5 << 1; break; - case SNDRV_PCM_RATE_11025: + case 11025: adn |= 0x4 << 1; break; - case SNDRV_PCM_RATE_16000: + case 16000: adn |= 0x3 << 1; break; - case SNDRV_PCM_RATE_22050: + case 22050: adn |= 0x2 << 1; break; - case SNDRV_PCM_RATE_32000: + case 32000: adn |= 0x1 << 1; break; - case SNDRV_PCM_RATE_44100: - case SNDRV_PCM_RATE_48000: + case 44100: + case 48000: break; } diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c index 3d850b97037a..31e39ffd1d8e 100644 --- a/sound/soc/codecs/wm8940.c +++ b/sound/soc/codecs/wm8940.c @@ -378,23 +378,23 @@ static int wm8940_i2s_hw_params(struct snd_pcm_substream *substream, iface |= (1 << 9); switch (params_rate(params)) { - case SNDRV_PCM_RATE_8000: + case 8000: addcntrl |= (0x5 << 1); break; - case SNDRV_PCM_RATE_11025: + case 11025: addcntrl |= (0x4 << 1); break; - case SNDRV_PCM_RATE_16000: + case 16000: addcntrl |= (0x3 << 1); break; - case SNDRV_PCM_RATE_22050: + case 22050: addcntrl |= (0x2 << 1); break; - case SNDRV_PCM_RATE_32000: + case 32000: addcntrl |= (0x1 << 1); break; - case SNDRV_PCM_RATE_44100: - case SNDRV_PCM_RATE_48000: + case 44100: + case 48000: break; } ret = snd_soc_write(codec, WM8940_ADDCNTRL, addcntrl); diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c index a808675388fc..8812751da8c9 100644 --- a/sound/soc/codecs/wm8974.c +++ b/sound/soc/codecs/wm8974.c @@ -482,23 +482,23 @@ static int wm8974_pcm_hw_params(struct snd_pcm_substream *substream, /* filter coefficient */ switch (params_rate(params)) { - case SNDRV_PCM_RATE_8000: + case 8000: adn |= 0x5 << 1; break; - case SNDRV_PCM_RATE_11025: + case 11025: adn |= 0x4 << 1; break; - case SNDRV_PCM_RATE_16000: + case 16000: adn |= 0x3 << 1; break; - case SNDRV_PCM_RATE_22050: + case 22050: adn |= 0x2 << 1; break; - case SNDRV_PCM_RATE_32000: + case 32000: adn |= 0x1 << 1; break; - case SNDRV_PCM_RATE_44100: - case SNDRV_PCM_RATE_48000: + case 44100: + case 48000: break; } From a62e8f1978f49e52f87a711ff6711b323d4b12ff Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Thu, 24 Dec 2009 11:34:16 +0300 Subject: [PATCH 0125/1626] ACPI: EC: Accelerate query execution Split EC query handling into acknowledge and execution phase. This allows much smaller pending query lattency and lowers chances of EC going "wild" and losing events. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14858 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 122 +++++++++++++++++++++++++++++----------------- 1 file changed, 77 insertions(+), 45 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index fd1801bdee66..9cc38857c33b 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -201,14 +201,13 @@ unlock: spin_unlock_irqrestore(&ec->curr_lock, flags); } -static void acpi_ec_gpe_query(void *ec_cxt); +static int acpi_ec_sync_query(struct acpi_ec *ec); -static int ec_check_sci(struct acpi_ec *ec, u8 state) +static int ec_check_sci_sync(struct acpi_ec *ec, u8 state) { if (state & ACPI_EC_FLAG_SCI) { if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) - return acpi_os_execute(OSL_EC_BURST_HANDLER, - acpi_ec_gpe_query, ec); + return acpi_ec_sync_query(ec); } return 0; } @@ -249,11 +248,6 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, { unsigned long tmp; int ret = 0; - pr_debug(PREFIX "transaction start\n"); - /* disable GPE during transaction if storm is detected */ - if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { - acpi_disable_gpe(NULL, ec->gpe); - } if (EC_FLAGS_MSI) udelay(ACPI_EC_MSI_UDELAY); /* start transaction */ @@ -269,16 +263,6 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, spin_lock_irqsave(&ec->curr_lock, tmp); ec->curr = NULL; spin_unlock_irqrestore(&ec->curr_lock, tmp); - if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { - /* check if we received SCI during transaction */ - ec_check_sci(ec, acpi_ec_read_status(ec)); - /* it is safe to enable GPE outside of transaction */ - acpi_enable_gpe(NULL, ec->gpe); - } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) { - pr_info(PREFIX "GPE storm detected, " - "transactions will use polling mode\n"); - set_bit(EC_FLAGS_GPE_STORM, &ec->flags); - } return ret; } @@ -321,7 +305,24 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) status = -ETIME; goto end; } + pr_debug(PREFIX "transaction start\n"); + /* disable GPE during transaction if storm is detected */ + if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + acpi_disable_gpe(NULL, ec->gpe); + } + status = acpi_ec_transaction_unlocked(ec, t); + + /* check if we received SCI during transaction */ + ec_check_sci_sync(ec, acpi_ec_read_status(ec)); + if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + /* it is safe to enable GPE outside of transaction */ + acpi_enable_gpe(NULL, ec->gpe); + } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) { + pr_info(PREFIX "GPE storm detected, " + "transactions will use polling mode\n"); + set_bit(EC_FLAGS_GPE_STORM, &ec->flags); + } end: if (ec->global_lock) acpi_release_global_lock(glk); @@ -443,7 +444,7 @@ int ec_transaction(u8 command, EXPORT_SYMBOL(ec_transaction); -static int acpi_ec_query(struct acpi_ec *ec, u8 * data) +static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 * data) { int result; u8 d; @@ -452,20 +453,16 @@ static int acpi_ec_query(struct acpi_ec *ec, u8 * data) .wlen = 0, .rlen = 1}; if (!ec || !data) return -EINVAL; - /* * Query the EC to find out which _Qxx method we need to evaluate. * Note that successful completion of the query causes the ACPI_EC_SCI * bit to be cleared (and thus clearing the interrupt source). */ - - result = acpi_ec_transaction(ec, &t); + result = acpi_ec_transaction_unlocked(ec, &t); if (result) return result; - if (!d) return -ENODATA; - *data = d; return 0; } @@ -509,43 +506,78 @@ void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit) EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler); -static void acpi_ec_gpe_query(void *ec_cxt) +static void acpi_ec_run(void *cxt) { - struct acpi_ec *ec = ec_cxt; - u8 value = 0; - struct acpi_ec_query_handler *handler, copy; - - if (!ec || acpi_ec_query(ec, &value)) + struct acpi_ec_query_handler *handler = cxt; + if (!handler) return; - mutex_lock(&ec->lock); + pr_debug(PREFIX "start query execution\n"); + if (handler->func) + handler->func(handler->data); + else if (handler->handle) + acpi_evaluate_object(handler->handle, NULL, NULL, NULL); + pr_debug(PREFIX "stop query execution\n"); + kfree(handler); +} + +static int acpi_ec_sync_query(struct acpi_ec *ec) +{ + u8 value = 0; + int status; + struct acpi_ec_query_handler *handler, *copy; + if ((status = acpi_ec_query_unlocked(ec, &value))) + return status; list_for_each_entry(handler, &ec->list, node) { if (value == handler->query_bit) { /* have custom handler for this bit */ - memcpy(©, handler, sizeof(copy)); - mutex_unlock(&ec->lock); - if (copy.func) { - copy.func(copy.data); - } else if (copy.handle) { - acpi_evaluate_object(copy.handle, NULL, NULL, NULL); - } - return; + copy = kmalloc(sizeof(*handler), GFP_KERNEL); + if (!copy) + return -ENOMEM; + memcpy(copy, handler, sizeof(*copy)); + pr_debug(PREFIX "push query execution (0x%2x) on queue\n", value); + return acpi_os_execute(OSL_GPE_HANDLER, + acpi_ec_run, copy); } } + return 0; +} + +static void acpi_ec_gpe_query(void *ec_cxt) +{ + struct acpi_ec *ec = ec_cxt; + if (!ec) + return; + mutex_lock(&ec->lock); + acpi_ec_sync_query(ec); mutex_unlock(&ec->lock); } +static void acpi_ec_gpe_query(void *ec_cxt); + +static int ec_check_sci(struct acpi_ec *ec, u8 state) +{ + if (state & ACPI_EC_FLAG_SCI) { + if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) { + pr_debug(PREFIX "push gpe query to the queue\n"); + return acpi_os_execute(OSL_NOTIFY_HANDLER, + acpi_ec_gpe_query, ec); + } + } + return 0; +} + static u32 acpi_ec_gpe_handler(void *data) { struct acpi_ec *ec = data; - u8 status; pr_debug(PREFIX "~~~> interrupt\n"); - status = acpi_ec_read_status(ec); - advance_transaction(ec, status); - if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0) + advance_transaction(ec, acpi_ec_read_status(ec)); + if (ec_transaction_done(ec) && + (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) { wake_up(&ec->wait); - ec_check_sci(ec, status); + ec_check_sci(ec, acpi_ec_read_status(ec)); + } return ACPI_INTERRUPT_HANDLED; } From 6d3b82f2d31f22085e5711b28dddcb9fb3d97a25 Mon Sep 17 00:00:00 2001 From: Fang Wenqi Date: Thu, 24 Dec 2009 17:51:42 -0500 Subject: [PATCH 0126/1626] ext4: Update documentation to correct the inode_readahead_blks option name Per commit 240799cd, the option name for readahead should be inode_readahead_blks, not inode_readahead. Signed-off-by: Fang Wenqi Signed-off-by: "Theodore Ts'o" --- Documentation/filesystems/ext4.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index af6885c3c821..e1def1786e50 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -196,7 +196,7 @@ nobarrier This also requires an IO stack which can support also be used to enable or disable barriers, for consistency with other ext4 mount options. -inode_readahead=n This tuning parameter controls the maximum +inode_readahead_blks=n This tuning parameter controls the maximum number of inode table blocks that ext4's inode table readahead algorithm will pre-read into the buffer cache. The default value is 32 blocks. From 5ee581483246e832ca5a9fc1ac669bba0b6ec468 Mon Sep 17 00:00:00 2001 From: Jiro SEKIBA Date: Sun, 6 Dec 2009 15:43:56 +0900 Subject: [PATCH 0127/1626] nilfs2: trivial coding style fix This is a trivial style fix patch to mend errors/warnings reported by "checkpatch.pl --file". Signed-off-by: Jiro SEKIBA Signed-off-by: Ryusuke Konishi --- fs/nilfs2/bmap.c | 4 ++-- fs/nilfs2/cpfile.c | 31 ++++++++++++++++++------------- fs/nilfs2/direct.c | 17 +++++++++-------- 3 files changed, 29 insertions(+), 23 deletions(-) diff --git a/fs/nilfs2/bmap.c b/fs/nilfs2/bmap.c index f4a14ea2ed9c..effdbdbe6c11 100644 --- a/fs/nilfs2/bmap.c +++ b/fs/nilfs2/bmap.c @@ -417,8 +417,8 @@ __u64 nilfs_bmap_data_get_key(const struct nilfs_bmap *bmap, key = page_index(bh->b_page) << (PAGE_CACHE_SHIFT - bmap->b_inode->i_blkbits); - for (pbh = page_buffers(bh->b_page); pbh != bh; - pbh = pbh->b_this_page, key++); + for (pbh = page_buffers(bh->b_page); pbh != bh; pbh = pbh->b_this_page) + key++; return key; } diff --git a/fs/nilfs2/cpfile.c b/fs/nilfs2/cpfile.c index d5ad54e204a5..18737818db63 100644 --- a/fs/nilfs2/cpfile.c +++ b/fs/nilfs2/cpfile.c @@ -328,19 +328,24 @@ int nilfs_cpfile_delete_checkpoints(struct inode *cpfile, tnicps += nicps; nilfs_mdt_mark_buffer_dirty(cp_bh); nilfs_mdt_mark_dirty(cpfile); - if (!nilfs_cpfile_is_in_first(cpfile, cno) && - (count = nilfs_cpfile_block_sub_valid_checkpoints( - cpfile, cp_bh, kaddr, nicps)) == 0) { - /* make hole */ - kunmap_atomic(kaddr, KM_USER0); - brelse(cp_bh); - ret = nilfs_cpfile_delete_checkpoint_block( - cpfile, cno); - if (ret == 0) - continue; - printk(KERN_ERR "%s: cannot delete block\n", - __func__); - break; + if (!nilfs_cpfile_is_in_first(cpfile, cno)) { + count = + nilfs_cpfile_block_sub_valid_checkpoints( + cpfile, cp_bh, kaddr, nicps); + if (count == 0) { + /* make hole */ + kunmap_atomic(kaddr, KM_USER0); + brelse(cp_bh); + ret = + nilfs_cpfile_delete_checkpoint_block( + cpfile, cno); + if (ret == 0) + continue; + printk(KERN_ERR + "%s: cannot delete block\n", + __func__); + break; + } } } diff --git a/fs/nilfs2/direct.c b/fs/nilfs2/direct.c index d369ac718277..236753df5cdf 100644 --- a/fs/nilfs2/direct.c +++ b/fs/nilfs2/direct.c @@ -51,11 +51,11 @@ static int nilfs_direct_lookup(const struct nilfs_bmap *bmap, struct nilfs_direct *direct; __u64 ptr; - direct = (struct nilfs_direct *)bmap; - if ((key > NILFS_DIRECT_KEY_MAX) || - (level != 1) || /* XXX: use macro for level 1 */ - ((ptr = nilfs_direct_get_ptr(direct, key)) == - NILFS_BMAP_INVALID_PTR)) + direct = (struct nilfs_direct *)bmap; /* XXX: use macro for level 1 */ + if (key > NILFS_DIRECT_KEY_MAX || level != 1) + return -ENOENT; + ptr = nilfs_direct_get_ptr(direct, key); + if (ptr == NILFS_BMAP_INVALID_PTR) return -ENOENT; if (ptrp != NULL) @@ -73,9 +73,10 @@ static int nilfs_direct_lookup_contig(const struct nilfs_bmap *bmap, sector_t blocknr; int ret, cnt; - if (key > NILFS_DIRECT_KEY_MAX || - (ptr = nilfs_direct_get_ptr(direct, key)) == - NILFS_BMAP_INVALID_PTR) + if (key > NILFS_DIRECT_KEY_MAX) + return -ENOENT; + ptr = nilfs_direct_get_ptr(direct, key); + if (ptr == NILFS_BMAP_INVALID_PTR) return -ENOENT; if (NILFS_BMAP_USE_VBN(bmap)) { From 33e189bd5754dead3ece130da8e62f470f526f36 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 23 Dec 2009 13:57:47 +0100 Subject: [PATCH 0128/1626] nilfs2: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser Signed-off-by: Ryusuke Konishi --- fs/nilfs2/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index f6af76042d80..d6b2b83de363 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -480,7 +480,7 @@ static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp, unsigned int cmd, void __user *argp) { struct nilfs_argv argv[5]; - const static size_t argsz[5] = { + static const size_t argsz[5] = { sizeof(struct nilfs_vdesc), sizeof(struct nilfs_period), sizeof(__u64), From 4a299bf591bc5bef3bde8316e603b9eaec5a7696 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 24 Dec 2009 21:40:24 -0800 Subject: [PATCH 0129/1626] Input: speed up suspend/shutdown for PS/2 mice and keyboards Instead of doing full-blown reset while suspending or shutting down the box use lighter form of reset that should take less time. Tested-by: Alan Stern Tested-by: Rafael J. Wysocki Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 5 +++-- drivers/input/mouse/psmouse-base.c | 5 ++++- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index a3573570c52f..1f5e2ce327d6 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -134,7 +134,8 @@ static const unsigned short atkbd_unxlate_table[128] = { #define ATKBD_CMD_GETID 0x02f2 #define ATKBD_CMD_SETREP 0x10f3 #define ATKBD_CMD_ENABLE 0x00f4 -#define ATKBD_CMD_RESET_DIS 0x00f5 +#define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */ +#define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */ #define ATKBD_CMD_SETALL_MBR 0x00fa #define ATKBD_CMD_RESET_BAT 0x02ff #define ATKBD_CMD_RESEND 0x00fe @@ -836,7 +837,7 @@ static void atkbd_cleanup(struct serio *serio) struct atkbd *atkbd = serio_get_drvdata(serio); atkbd_disable(atkbd); - ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT); + ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_DEF); } diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index fd0bc094616a..401ac6b6edd4 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -1137,7 +1137,10 @@ static void psmouse_cleanup(struct serio *serio) if (psmouse->cleanup) psmouse->cleanup(psmouse); - psmouse_reset(psmouse); +/* + * Reset the mouse to defaults (bare PS/2 protocol). + */ + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); /* * Some boxes, such as HP nx7400, get terribly confused if mouse From ea486e681188d64c6a101d8d06414aef0f9f0cd3 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 24 Dec 2009 21:40:43 -0800 Subject: [PATCH 0130/1626] Input: serio - do not mark kseriod freezable anymore We used to make kseriod freezable to prevent unnecessary attempts at resuming keyboard and mouse before taking hibernation image when suspend and hibernation were sharing PM operations. Now that they are separated and we don't risk resuming during 'thaw' we don't need to freeze kseriod anymore. This will allow us to start resetting mouse and keyboard a bit earlier, before rest of the userspace comes back up. Acked-by: Rafael J. Wysocki Signed-off-by: Dmitry Torokhov --- drivers/input/serio/serio.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index 0236f0d5fd91..e0f30186d513 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -284,13 +284,7 @@ static void serio_handle_event(void) mutex_lock(&serio_mutex); - /* - * Note that we handle only one event here to give swsusp - * a chance to freeze kseriod thread. Serio events should - * be pretty rare so we are not concerned about taking - * performance hit. - */ - if ((event = serio_get_event())) { + while ((event = serio_get_event())) { switch (event->type) { case SERIO_REGISTER_PORT: @@ -380,10 +374,9 @@ static struct serio *serio_get_pending_child(struct serio *parent) static int serio_thread(void *nothing) { - set_freezable(); do { serio_handle_event(); - wait_event_freezable(serio_wait, + wait_event_interruptible(serio_wait, kthread_should_stop() || !list_empty(&serio_event_list)); } while (!kthread_should_stop()); From 25ae08317647c68ed9276f7bdc07d0d5fd042628 Mon Sep 17 00:00:00 2001 From: Jari Vanhala Date: Thu, 24 Dec 2009 21:52:19 -0800 Subject: [PATCH 0131/1626] Input: ff-memless - start playing FF effects immediately Instead of waiting for the next timer tick to start playing an effect do it immediately. This mostly helps systems using low HZ setting. Signed-off-by: Jari Vanhala Acked-by: Anssi Hannula Signed-off-by: Dmitry Torokhov --- drivers/input/ff-memless.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c index b483b2995fa9..decc51f45bfd 100644 --- a/drivers/input/ff-memless.c +++ b/drivers/input/ff-memless.c @@ -411,8 +411,6 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) msecs_to_jiffies(state->effect->replay.length); state->adj_at = state->play_at; - ml_schedule_timer(ml); - } else { debug("initiated stop"); @@ -420,10 +418,10 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) __set_bit(FF_EFFECT_ABORTING, &state->flags); else __clear_bit(FF_EFFECT_STARTED, &state->flags); - - ml_play_effects(ml); } + ml_play_effects(ml); + return 0; } From 1b11c88d3e8f55dc9d193d19de11e3f7abc1b7d7 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 24 Dec 2009 21:44:19 -0800 Subject: [PATCH 0132/1626] Input: ff-memless - another fix for signed to unsigned overflow The commit 9e68177ef93b2f34eee5a1e1707bceef4b9ba69c changed 'gain' from signed to unsigned to fix an issue with rumble effect calculation, however it introduced problems when calculating constant effects. Having 'gain' being unsigned int was an unfortunate choice since it dominates all implicit type conversions causing everything to be treated as unsigned int. Let's change it back to signed int and simply add proper casts to rumble effect calculations. Reported-by: Gary Stein Acked-by: Anssi Hannula Signed-off-by: Dmitry Torokhov --- drivers/input/ff-memless.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c index decc51f45bfd..9667a5fd6bd7 100644 --- a/drivers/input/ff-memless.c +++ b/drivers/input/ff-memless.c @@ -225,7 +225,7 @@ static int get_compatible_type(struct ff_device *ff, int effect_type) */ static void ml_combine_effects(struct ff_effect *effect, struct ml_effect_state *state, - unsigned int gain) + int gain) { struct ff_effect *new = state->effect; unsigned int strong, weak, i; @@ -252,8 +252,8 @@ static void ml_combine_effects(struct ff_effect *effect, break; case FF_RUMBLE: - strong = new->u.rumble.strong_magnitude * gain / 0xffff; - weak = new->u.rumble.weak_magnitude * gain / 0xffff; + strong = (u32)new->u.rumble.strong_magnitude * gain / 0xffff; + weak = (u32)new->u.rumble.weak_magnitude * gain / 0xffff; effect->u.rumble.strong_magnitude = min(strong + effect->u.rumble.strong_magnitude, 0xffffU); From 94ec26c855bc675259e4f1658673f458040affd7 Mon Sep 17 00:00:00 2001 From: Jari Vanhala Date: Thu, 24 Dec 2009 21:52:20 -0800 Subject: [PATCH 0133/1626] Input: ff-memless - add notion of direction to for rumble effects This adds simple direction calculation when combining effects. It's useful to decide motor direction for rumble (vibrator). Signed-off-by: Jari Vanhala Acked-by: Anssi Hannula Signed-off-by: Dmitry Torokhov --- drivers/input/ff-memless.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c index 9667a5fd6bd7..f967008f332e 100644 --- a/drivers/input/ff-memless.c +++ b/drivers/input/ff-memless.c @@ -220,6 +220,22 @@ static int get_compatible_type(struct ff_device *ff, int effect_type) return 0; } +/* + * Only left/right direction should be used (under/over 0x8000) for + * forward/reverse motor direction (to keep calculation fast & simple). + */ +static u16 ml_calculate_direction(u16 direction, u16 force, + u16 new_direction, u16 new_force) +{ + if (!force) + return new_direction; + if (!new_force) + return direction; + return (((u32)(direction >> 1) * force + + (new_direction >> 1) * new_force) / + (force + new_force)) << 1; +} + /* * Combine two effects and apply gain. */ @@ -254,6 +270,19 @@ static void ml_combine_effects(struct ff_effect *effect, case FF_RUMBLE: strong = (u32)new->u.rumble.strong_magnitude * gain / 0xffff; weak = (u32)new->u.rumble.weak_magnitude * gain / 0xffff; + + if (effect->u.rumble.strong_magnitude + strong) + effect->direction = ml_calculate_direction( + effect->direction, + effect->u.rumble.strong_magnitude, + new->direction, strong); + else if (effect->u.rumble.weak_magnitude + weak) + effect->direction = ml_calculate_direction( + effect->direction, + effect->u.rumble.weak_magnitude, + new->direction, weak); + else + effect->direction = 0; effect->u.rumble.strong_magnitude = min(strong + effect->u.rumble.strong_magnitude, 0xffffU); @@ -268,6 +297,13 @@ static void ml_combine_effects(struct ff_effect *effect, /* here we also scale it 0x7fff => 0xffff */ i = i * gain / 0x7fff; + if (effect->u.rumble.strong_magnitude + i) + effect->direction = ml_calculate_direction( + effect->direction, + effect->u.rumble.strong_magnitude, + new->direction, i); + else + effect->direction = 0; effect->u.rumble.strong_magnitude = min(i + effect->u.rumble.strong_magnitude, 0xffffU); effect->u.rumble.weak_magnitude = From 98b7fb0472f828536a7786df6bd517322c0c17dc Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 24 Dec 2009 22:37:49 -0800 Subject: [PATCH 0134/1626] Input: iforce - fix oops on device disconnect Do not try to free iforce device when we closing input device; disconnect is the only place where it should be deleted. Reported-by: Johannes Ebke Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/iforce/iforce-main.c | 26 ++++--------------- drivers/input/joystick/iforce/iforce-usb.c | 28 ++++++--------------- drivers/input/joystick/iforce/iforce.h | 2 -- 3 files changed, 12 insertions(+), 44 deletions(-) diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c index f6c688cae334..acc3a9efb00f 100644 --- a/drivers/input/joystick/iforce/iforce-main.c +++ b/drivers/input/joystick/iforce/iforce-main.c @@ -210,7 +210,7 @@ static int iforce_open(struct input_dev *dev) return 0; } -static void iforce_release(struct input_dev *dev) +static void iforce_close(struct input_dev *dev) { struct iforce *iforce = input_get_drvdata(dev); int i; @@ -230,28 +230,12 @@ static void iforce_release(struct input_dev *dev) iforce_send_packet(iforce, FF_CMD_ENABLE, "\001"); } - switch (iforce->bus) { -#ifdef CONFIG_JOYSTICK_IFORCE_USB - case IFORCE_USB: - usb_kill_urb(iforce->irq); - - /* The device was unplugged before the file - * was released */ - if (iforce->usbdev == NULL) { - iforce_delete_device(iforce); - kfree(iforce); - } - break; -#endif - } -} - -void iforce_delete_device(struct iforce *iforce) -{ switch (iforce->bus) { #ifdef CONFIG_JOYSTICK_IFORCE_USB case IFORCE_USB: - iforce_usb_delete(iforce); + usb_kill_urb(iforce->irq); + usb_kill_urb(iforce->out); + usb_kill_urb(iforce->ctrl); break; #endif #ifdef CONFIG_JOYSTICK_IFORCE_232 @@ -303,7 +287,7 @@ int iforce_init_device(struct iforce *iforce) input_dev->name = "Unknown I-Force device"; input_dev->open = iforce_open; - input_dev->close = iforce_release; + input_dev->close = iforce_close; /* * On-device memory allocation. diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index 9f289d8f52c6..c0ad88369442 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -186,33 +186,19 @@ fail: return err; } -/* Called by iforce_delete() */ -void iforce_usb_delete(struct iforce* iforce) +static void iforce_usb_disconnect(struct usb_interface *intf) { - usb_kill_urb(iforce->irq); - usb_kill_urb(iforce->out); - usb_kill_urb(iforce->ctrl); + struct iforce *iforce = usb_get_intfdata(intf); + + usb_set_intfdata(intf, NULL); + + input_unregister_device(iforce->dev); usb_free_urb(iforce->irq); usb_free_urb(iforce->out); usb_free_urb(iforce->ctrl); -} -static void iforce_usb_disconnect(struct usb_interface *intf) -{ - struct iforce *iforce = usb_get_intfdata(intf); - int open = 0; /* FIXME! iforce->dev.handle->open; */ - - usb_set_intfdata(intf, NULL); - if (iforce) { - iforce->usbdev = NULL; - input_unregister_device(iforce->dev); - - if (!open) { - iforce_delete_device(iforce); - kfree(iforce); - } - } + kfree(iforce); } static struct usb_device_id iforce_usb_ids [] = { diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h index f2d91f4028ca..9f494b75848a 100644 --- a/drivers/input/joystick/iforce/iforce.h +++ b/drivers/input/joystick/iforce/iforce.h @@ -150,11 +150,9 @@ void iforce_serial_xmit(struct iforce *iforce); /* iforce-usb.c */ void iforce_usb_xmit(struct iforce *iforce); -void iforce_usb_delete(struct iforce *iforce); /* iforce-main.c */ int iforce_init_device(struct iforce *iforce); -void iforce_delete_device(struct iforce *iforce); /* iforce-packets.c */ int iforce_control_playback(struct iforce*, u16 id, unsigned int); From dd219234d201431d0fc56a74e3a4a97ca3eb4589 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 24 Dec 2009 22:50:23 -0800 Subject: [PATCH 0135/1626] Input: matrix-keypad - handle cases when GPIOs can't be wakeup sources On certain boards not all GPIOs may be used as wakeup sources, in which case some of enable_irq_wake() calls will fail. On resume calling disable_irq_wake() will warn about unbalanced IRQ wake disable. Solve this by checking whether enable_irq_wake() succeeded or not and no not call disable_irq_wake() for these GPIOs/IRQs that have not been enabled. Reported-by: Pavel Machek Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/matrix_keypad.c | 29 +++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-) diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c index 34f4a29d4973..d3c8b61a941d 100644 --- a/drivers/input/keyboard/matrix_keypad.c +++ b/drivers/input/keyboard/matrix_keypad.c @@ -29,11 +29,13 @@ struct matrix_keypad { unsigned short *keycodes; unsigned int row_shift; + DECLARE_BITMAP(disabled_gpios, MATRIX_MAX_ROWS); + uint32_t last_key_state[MATRIX_MAX_COLS]; struct delayed_work work; + spinlock_t lock; bool scan_pending; bool stopped; - spinlock_t lock; }; /* @@ -222,9 +224,16 @@ static int matrix_keypad_suspend(struct device *dev) matrix_keypad_stop(keypad->input_dev); - if (device_may_wakeup(&pdev->dev)) - for (i = 0; i < pdata->num_row_gpios; i++) - enable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + if (device_may_wakeup(&pdev->dev)) { + for (i = 0; i < pdata->num_row_gpios; i++) { + if (!test_bit(i, keypad->disabled_gpios)) { + unsigned int gpio = pdata->row_gpios[i]; + + if (enable_irq_wake(gpio_to_irq(gpio)) == 0) + __set_bit(i, keypad->disabled_gpios); + } + } + } return 0; } @@ -236,9 +245,15 @@ static int matrix_keypad_resume(struct device *dev) const struct matrix_keypad_platform_data *pdata = keypad->pdata; int i; - if (device_may_wakeup(&pdev->dev)) - for (i = 0; i < pdata->num_row_gpios; i++) - disable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + if (device_may_wakeup(&pdev->dev)) { + for (i = 0; i < pdata->num_row_gpios; i++) { + if (test_and_clear_bit(i, keypad->disabled_gpios)) { + unsigned int gpio = pdata->row_gpios[i]; + + disable_irq_wake(gpio_to_irq(gpio)); + } + } + } matrix_keypad_start(keypad->input_dev); From 8b90ca08821fee79e181bfcbc3bbd41ef5637136 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 24 Dec 2009 01:17:46 +0100 Subject: [PATCH 0136/1626] ALSA: Fix indentation in pcm_native.c Signed-off-by: Guennadi Liakhovetski Signed-off-by: Takashi Iwai --- sound/core/pcm_native.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 29ab46a12e11..25b0641e6b8c 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1918,13 +1918,13 @@ int snd_pcm_hw_constraints_complete(struct snd_pcm_substream *substream) err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_RATE, hw->rate_min, hw->rate_max); - if (err < 0) - return err; + if (err < 0) + return err; err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, hw->period_bytes_min, hw->period_bytes_max); - if (err < 0) - return err; + if (err < 0) + return err; err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIODS, hw->periods_min, hw->periods_max); From ef18beded8ddbaafdf4914bab209f77e60ae3a18 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 25 Dec 2009 13:14:27 +0800 Subject: [PATCH 0137/1626] ALSA: hda - HDMI sticky stream tag support When we run the following commands in turn (with CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0), speaker-test -Dhw:0,3 -c2 -twav # HDMI speaker-test -Dhw:0,0 -c2 -twav # Analog The second command will produce sound in the analog lineout _as well as_ HDMI sink. The root cause is, device 0 "reuses" the same stream tag that was used by device 3, and the "intelhdmi - sticky stream id" patch leaves the HDMI codec in a functional state. So the HDMI codec happily accepts the audio samples which reuse its stream tag. The proposed solution is to remember the last device each azx_dev was assigned to, and prefer to 1) reuse the azx_dev (and hence the stream tag) the HDMI codec last used 2) or assign a never-used azx_dev for HDMI With this patch and the above two speaker-test commands, HDMI codec will use stream tag 8 and Analog codec will use 5. The stream tag used by HDMI codec won't be reused by others, as long as we don't run out of the 4 playback azx_dev's. The legacy Analog codec will continue to use stream tag 5 because its device id is 0 (this is a bit tricky). Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index ff8ad46cc50e..ec9c348336cc 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -356,6 +356,7 @@ struct azx_dev { */ unsigned char stream_tag; /* assigned stream */ unsigned char index; /* stream index */ + int device; /* last device number assigned to */ unsigned int opened :1; unsigned int running :1; @@ -1441,10 +1442,13 @@ static int __devinit azx_codec_configure(struct azx *chip) */ /* assign a stream for the PCM */ -static inline struct azx_dev *azx_assign_device(struct azx *chip, int stream) +static inline struct azx_dev * +azx_assign_device(struct azx *chip, struct snd_pcm_substream *substream) { int dev, i, nums; - if (stream == SNDRV_PCM_STREAM_PLAYBACK) { + struct azx_dev *res = NULL; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { dev = chip->playback_index_offset; nums = chip->playback_streams; } else { @@ -1453,10 +1457,15 @@ static inline struct azx_dev *azx_assign_device(struct azx *chip, int stream) } for (i = 0; i < nums; i++, dev++) if (!chip->azx_dev[dev].opened) { - chip->azx_dev[dev].opened = 1; - return &chip->azx_dev[dev]; + res = &chip->azx_dev[dev]; + if (res->device == substream->pcm->device) + break; } - return NULL; + if (res) { + res->opened = 1; + res->device = substream->pcm->device; + } + return res; } /* release the assigned stream */ @@ -1505,7 +1514,7 @@ static int azx_pcm_open(struct snd_pcm_substream *substream) int err; mutex_lock(&chip->open_mutex); - azx_dev = azx_assign_device(chip, substream->stream); + azx_dev = azx_assign_device(chip, substream); if (azx_dev == NULL) { mutex_unlock(&chip->open_mutex); return -EBUSY; From 2faf2e19dd0e060eeb32442858ef495ac3083277 Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Fri, 25 Dec 2009 15:46:07 -0500 Subject: [PATCH 0138/1626] ext4: return correct wbc.nr_to_write in ext4_da_writepages When ext4_da_writepages increases the nr_to_write in writeback_control then it must always re-base the return value. Originally there was a (misguided) attempt prevent wbc.nr_to_write from going negative. In fact, it's necessary to allow nr_to_write to be negative so that wb_writeback() can correctly calculate how many pages were actually written. Signed-off-by: Richard Kennedy Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 282621f18c10..3e3b45458ef8 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2967,8 +2967,7 @@ retry: out_writepages: if (!no_nrwrite_index_update) wbc->no_nrwrite_index_update = 0; - if (wbc->nr_to_write > nr_to_writebump) - wbc->nr_to_write -= nr_to_writebump; + wbc->nr_to_write -= nr_to_writebump; wbc->range_start = range_start; trace_ext4_da_writepages_result(inode, wbc, ret, pages_written); return ret; From 729d55ba972348234759f8e40abf8de020f0d505 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 25 Dec 2009 22:49:01 +0100 Subject: [PATCH 0139/1626] ALSA: hda - Disable tigger at pin-sensing on AD codecs Analog Device codecs seem to have problems with the triggering of pin-sensing although their pincaps give the trigger requirements. Some reported that constant CPU load on HP laptops with AD codecs. For avoiding this regression, add a flag to codec struct to notify explicitly that the codec doesn't suppot the trigger at pin-sensing. Tested-by: Maciej Rutecki Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 10 ++++++---- sound/pci/hda/hda_codec.h | 1 + sound/pci/hda/patch_analog.c | 16 ++++++++++++++++ 3 files changed, 23 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 950ee5cfcacf..f98b47cd6cfb 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1327,11 +1327,13 @@ EXPORT_SYMBOL_HDA(snd_hda_query_pin_caps); */ u32 snd_hda_pin_sense(struct hda_codec *codec, hda_nid_t nid) { - u32 pincap = snd_hda_query_pin_caps(codec, nid); - - if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */ - snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0); + u32 pincap; + if (!codec->no_trigger_sense) { + pincap = snd_hda_query_pin_caps(codec, nid); + if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */ + snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0); + } return snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_SENSE, 0); } diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 1d541b7f5547..0a770a28e71f 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -817,6 +817,7 @@ struct hda_codec { unsigned int pin_amp_workaround:1; /* pin out-amp takes index * (e.g. Conexant codecs) */ + unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */ #ifdef CONFIG_SND_HDA_POWER_SAVE unsigned int power_on :1; /* current (global) power-state */ unsigned int power_transition :1; /* power-state in transition */ diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 1a36137e13ec..69a941c7b158 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -1186,6 +1186,8 @@ static int patch_ad1986a(struct hda_codec *codec) */ spec->multiout.no_share_stream = 1; + codec->no_trigger_sense = 1; + return 0; } @@ -1371,6 +1373,8 @@ static int patch_ad1983(struct hda_codec *codec) codec->patch_ops = ad198x_patch_ops; + codec->no_trigger_sense = 1; + return 0; } @@ -1813,6 +1817,9 @@ static int patch_ad1981(struct hda_codec *codec) codec->patch_ops.unsol_event = ad1981_hp_unsol_event; break; } + + codec->no_trigger_sense = 1; + return 0; } @@ -3118,6 +3125,8 @@ static int patch_ad1988(struct hda_codec *codec) #endif spec->vmaster_nid = 0x04; + codec->no_trigger_sense = 1; + return 0; } @@ -3330,6 +3339,8 @@ static int patch_ad1884(struct hda_codec *codec) codec->patch_ops = ad198x_patch_ops; + codec->no_trigger_sense = 1; + return 0; } @@ -4287,6 +4298,8 @@ static int patch_ad1884a(struct hda_codec *codec) break; } + codec->no_trigger_sense = 1; + return 0; } @@ -4623,6 +4636,9 @@ static int patch_ad1882(struct hda_codec *codec) spec->mixers[2] = ad1882_6stack_mixers; break; } + + codec->no_trigger_sense = 1; + return 0; } From a252c81a69c4f9a5a8782f33b91bd837e9dcd406 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 25 Dec 2009 22:56:20 +0100 Subject: [PATCH 0140/1626] ALSA: hda - use snd_hda_jack_detect() again in patch_sigmatel.c Use snd_hda_jack_detect() again for jack-sensing. The triggering problem can be worked around with codec->no_trigger_sense flag now. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index eeda7beeb57a..2291a8396817 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4453,14 +4453,7 @@ static inline int get_pin_presence(struct hda_codec *codec, hda_nid_t nid) { if (!nid) return 0; - /* NOTE: we can't use snd_hda_jack_detect() here because STAC/IDT - * codecs behave wrongly when SET_PIN_SENSE is triggered, although - * the pincap gives TRIG_REQ bit. - */ - if (snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_SENSE, 0) & - AC_PINSENSE_PRESENCE) - return 1; - return 0; + return snd_hda_jack_detect(codec, nid); } static void stac92xx_line_out_detect(struct hda_codec *codec, @@ -4962,6 +4955,7 @@ static int patch_stac9200(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac9200_pin_nids); spec->pin_nids = stac9200_pin_nids; @@ -5024,6 +5018,7 @@ static int patch_stac925x(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac925x_pin_nids); spec->pin_nids = stac925x_pin_nids; @@ -5108,6 +5103,7 @@ static int patch_stac92hd73xx(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; codec->slave_dig_outs = stac92hd73xx_slave_dig_outs; spec->num_pins = ARRAY_SIZE(stac92hd73xx_pin_nids); @@ -5255,6 +5251,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs; spec->digbeep_nid = 0x21; @@ -5418,6 +5415,7 @@ static int patch_stac92hd71bxx(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; codec->patch_ops = stac92xx_patch_ops; spec->num_pins = STAC92HD71BXX_NUM_PINS; @@ -5661,6 +5659,7 @@ static int patch_stac922x(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac922x_pin_nids); spec->pin_nids = stac922x_pin_nids; @@ -5764,6 +5763,7 @@ static int patch_stac927x(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; codec->slave_dig_outs = stac927x_slave_dig_outs; spec->num_pins = ARRAY_SIZE(stac927x_pin_nids); @@ -5898,6 +5898,7 @@ static int patch_stac9205(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac9205_pin_nids); spec->pin_nids = stac9205_pin_nids; @@ -6053,6 +6054,7 @@ static int patch_stac9872(struct hda_codec *codec) spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac9872_pin_nids); spec->pin_nids = stac9872_pin_nids; From 17a2a9b57a9a7d2fd8f97df951b5e63e0bd56ef5 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 25 Dec 2009 15:40:38 -0800 Subject: [PATCH 0141/1626] x86, compress: Force i386 instructions for the decompressor Recently, some distros have started shipping versions of gcc which default to -march=i686. This breaks building kernels for pre-i686 machines, even if they have been selected in Kconfig, due to the generation of CMOV instructions. There isn't enough benefit to try to preserve the generation of these instructions even when selected, so simply force -march=i386 for the decompressor when building a 32-bit kernel. Reported-and-tested-by: Chris Rankin Signed-off-by: H. Peter Anvin LKML-Reference: <219280.97558.qm@web52907.mail.re2.yahoo.com> --- arch/x86/boot/compressed/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index f8ed0658404c..f25bbd37765a 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -9,6 +9,7 @@ targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinu KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING +cflags-$(CONFIG_X86_32) := -march=i386 cflags-$(CONFIG_X86_64) := -mcmodel=small KBUILD_CFLAGS += $(cflags-y) KBUILD_CFLAGS += $(call cc-option,-ffreestanding) From 4a6e47a460ce55e283063fc3f7391c8ea46bea27 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 25 Dec 2009 17:13:07 -0800 Subject: [PATCH 0142/1626] bnx2x: Initialize cnic status block during chip reset When the device is reset during MTU change, ring size change, or self test, etc, the cnic status block needs to be properly initialized if cnic is registered. Signed-off-by: Michael Chan Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 77ba13520d87..306c2b8165e2 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -7593,6 +7593,8 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) if (bp->cnic_eth_dev.drv_state & CNIC_DRV_STATE_REGD) { bnx2x_set_iscsi_eth_mac_addr(bp, 1); bp->cnic_flags |= BNX2X_CNIC_FLAG_MAC_SET; + bnx2x_init_sb(bp, bp->cnic_sb, bp->cnic_sb_mapping, + CNIC_SB_ID(bp)); } mutex_unlock(&bp->cnic_mutex); #endif From 28f6aeea3f12d37bd258b2c0d5ba891bff4ec479 Mon Sep 17 00:00:00 2001 From: Jamal Hadi Salim Date: Fri, 25 Dec 2009 17:30:22 -0800 Subject: [PATCH 0143/1626] net: restore ip source validation when using policy routing and the skb mark: there are cases where a back path validation requires us to use a different routing table for src ip validation than the one used for mapping ingress dst ip. One such a case is transparent proxying where we pretend to be the destination system and therefore the local table is used for incoming packets but possibly a main table would be used on outbound. Make the default behavior to allow the above and if users need to turn on the symmetry via sysctl src_valid_mark Signed-off-by: Jamal Hadi Salim Signed-off-by: David S. Miller --- include/linux/inetdevice.h | 1 + include/linux/sysctl.h | 1 + net/ipv4/devinet.c | 1 + net/ipv4/fib_frontend.c | 2 ++ 4 files changed, 5 insertions(+) diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h index 699e85c01a4d..b2304929434e 100644 --- a/include/linux/inetdevice.h +++ b/include/linux/inetdevice.h @@ -81,6 +81,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev) #define IN_DEV_FORWARD(in_dev) IN_DEV_CONF_GET((in_dev), FORWARDING) #define IN_DEV_MFORWARD(in_dev) IN_DEV_ANDCONF((in_dev), MC_FORWARDING) #define IN_DEV_RPFILTER(in_dev) IN_DEV_MAXCONF((in_dev), RP_FILTER) +#define IN_DEV_SRC_VMARK(in_dev) IN_DEV_ORCONF((in_dev), SRC_VMARK) #define IN_DEV_SOURCE_ROUTE(in_dev) IN_DEV_ANDCONF((in_dev), \ ACCEPT_SOURCE_ROUTE) #define IN_DEV_ACCEPT_LOCAL(in_dev) IN_DEV_ORCONF((in_dev), ACCEPT_LOCAL) diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index 877ba039e6a4..bd27fbc9db62 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -482,6 +482,7 @@ enum NET_IPV4_CONF_ARP_ACCEPT=21, NET_IPV4_CONF_ARP_NOTIFY=22, NET_IPV4_CONF_ACCEPT_LOCAL=23, + NET_IPV4_CONF_SRC_VMARK=24, __NET_IPV4_CONF_MAX }; diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 5cdbc102a418..040c4f05b653 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1397,6 +1397,7 @@ static struct devinet_sysctl_table { DEVINET_SYSCTL_RW_ENTRY(ACCEPT_SOURCE_ROUTE, "accept_source_route"), DEVINET_SYSCTL_RW_ENTRY(ACCEPT_LOCAL, "accept_local"), + DEVINET_SYSCTL_RW_ENTRY(SRC_VMARK, "src_valid_mark"), DEVINET_SYSCTL_RW_ENTRY(PROXY_ARP, "proxy_arp"), DEVINET_SYSCTL_RW_ENTRY(MEDIUM_ID, "medium_id"), DEVINET_SYSCTL_RW_ENTRY(BOOTP_RELAY, "bootp_relay"), diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 3323168ee52d..82dbf711d6d0 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -252,6 +252,8 @@ int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif, no_addr = in_dev->ifa_list == NULL; rpf = IN_DEV_RPFILTER(in_dev); accept_local = IN_DEV_ACCEPT_LOCAL(in_dev); + if (mark && !IN_DEV_SRC_VMARK(in_dev)) + fl.mark = 0; } rcu_read_unlock(); From b3837ceca005890f1a328eb1a4204a9dc92b1b9f Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Fri, 25 Dec 2009 18:48:33 -0800 Subject: [PATCH 0144/1626] vxge: use DMA_BIT_MASK instead of plain values. Use DMA_BIT_MASK instead of plain values. Signed-off-by: Denis Kirjanov Signed-off-by: David S. Miller --- drivers/net/vxge/vxge-main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c index f1c4b2a1e867..0fdfd58a35a1 100644 --- a/drivers/net/vxge/vxge-main.c +++ b/drivers/net/vxge/vxge-main.c @@ -4087,21 +4087,21 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre) goto _exit0; } - if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) { + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { vxge_debug_ll_config(VXGE_TRACE, "%s : using 64bit DMA", __func__); high_dma = 1; if (pci_set_consistent_dma_mask(pdev, - 0xffffffffffffffffULL)) { + DMA_BIT_MASK(64))) { vxge_debug_init(VXGE_ERR, "%s : unable to obtain 64bit DMA for " "consistent allocations", __func__); ret = -ENOMEM; goto _exit1; } - } else if (!pci_set_dma_mask(pdev, 0xffffffffUL)) { + } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { vxge_debug_ll_config(VXGE_TRACE, "%s : using 32bit DMA", __func__); } else { From 903b0eb39e3284cbf4d5a3773858e9586d16cbda Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Sat, 26 Dec 2009 03:27:45 +0100 Subject: [PATCH 0145/1626] ALSA: sound/arm: Fix build failure caused by missing struct aaci definition This patch fixes a build failure introduced by the patch ALSA: AACI: factor common hw_params logic into aaci_pcm_hw_params [1] by adding/moving the aaci struct to the right position. The patch mentioned above merged common source parts into one function, but unfortunately left out the aaci struct and consequently caused a build failure e.g. for arm versatile_config [2] References: [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=d3aee7996c30f928bbbbfd0994148e35d2e83084 [2] http://kisskb.ellerman.id.au/kisskb/buildresult/1893605/ Patch against Linus' tree. Signed-off-by: Peter Huewe Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index c5699863643b..656e474dca47 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -441,6 +441,7 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { int err; + struct aaci *aaci = substream->private_data; aaci_pcm_hw_free(substream); if (aacirun->pcm_open) { @@ -560,7 +561,6 @@ static int aaci_pcm_open(struct snd_pcm_substream *substream) static int aaci_pcm_playback_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { - struct aaci *aaci = substream->private_data; struct aaci_runtime *aacirun = substream->runtime->private_data; unsigned int channels = params_channels(params); int ret; @@ -659,7 +659,6 @@ static struct snd_pcm_ops aaci_playback_ops = { static int aaci_pcm_capture_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { - struct aaci *aaci = substream->private_data; struct aaci_runtime *aacirun = substream->runtime->private_data; int ret; From fdfa68298816192d47fc7443d1e2f00fa1420985 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Sun, 27 Dec 2009 00:09:45 +0900 Subject: [PATCH 0146/1626] ALSA: Fix a typo in Procfile.txt Fix a typo in Documentation/sound/alsa/Procfile.txt Signed-off-by Masanari Iida Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/Procfile.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt index 719a819f8cc2..07301de12cc4 100644 --- a/Documentation/sound/alsa/Procfile.txt +++ b/Documentation/sound/alsa/Procfile.txt @@ -95,7 +95,7 @@ card*/pcm*/xrun_debug It takes an integer value, can be changed by writing to this file, such as - # cat 5 > /proc/asound/card0/pcm0p/xrun_debug + # echo 5 > /proc/asound/card0/pcm0p/xrun_debug The value consists of the following bit flags: bit 0 = Enable XRUN/jiffies debug messages From ead510cebcdf41c92fce2a909f342255b028a33d Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 26 Dec 2009 22:52:13 -0200 Subject: [PATCH 0147/1626] thinkpad-acpi: don't take the first ALSA slot by default We don't want to be the first soundcard. We don't want to shift other soundcards out of the way either, even if they load much later. Ask ALSA to (by default) load us in one of the last three slots. This can be overriden at will using the "index" parameter. Reported-by: Whoopie Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/platform/x86/thinkpad_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 448c8aeb166b..3311b0020569 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -6388,7 +6388,7 @@ static struct ibm_struct brightness_driver_data = { #define TPACPI_ALSA_SHRTNAME "ThinkPad Console Audio Control" #define TPACPI_ALSA_MIXERNAME TPACPI_ALSA_SHRTNAME -static int alsa_index = SNDRV_DEFAULT_IDX1; +static int alsa_index = ~((1 << (SNDRV_CARDS - 3)) - 1); /* last three slots */ static char *alsa_id = "ThinkPadEC"; static int alsa_enable = SNDRV_DEFAULT_ENABLE1; From 74c75c1848b618f6717c1be887ad539ffac2e96d Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 26 Dec 2009 22:52:14 -0200 Subject: [PATCH 0148/1626] thinkpad-acpi: don't fail to load the entire module due to ALSA problems If we cannot create the ALSA mixer, it is a good reason to fail to load the volume subdriver, and not to fail to load the entire module. While at it, add more debugging messages, as the error paths are being used a lot more than I'd expect, and it is failing to set up the ALSA mixer on a number of ThinkPads. Reported-by: Peter Jordan Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/platform/x86/thinkpad_acpi.c | 31 ++++++++++++++++------------ 1 file changed, 18 insertions(+), 13 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 3311b0020569..9b7da9c96e76 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -6705,10 +6705,11 @@ static int __init volume_create_alsa_mixer(void) rc = snd_card_create(alsa_index, alsa_id, THIS_MODULE, sizeof(struct tpacpi_alsa_data), &card); - if (rc < 0) - return rc; - if (!card) - return -ENOMEM; + if (rc < 0 || !card) { + printk(TPACPI_ERR + "Failed to create ALSA card structures: %d\n", rc); + return 1; + } BUG_ON(!card->private_data); data = card->private_data; @@ -6741,8 +6742,9 @@ static int __init volume_create_alsa_mixer(void) rc = snd_ctl_add(card, ctl_vol); if (rc < 0) { printk(TPACPI_ERR - "Failed to create ALSA volume control\n"); - goto err_out; + "Failed to create ALSA volume control: %d\n", + rc); + goto err_exit; } data->ctl_vol_id = &ctl_vol->id; } @@ -6750,22 +6752,25 @@ static int __init volume_create_alsa_mixer(void) ctl_mute = snd_ctl_new1(&volume_alsa_control_mute, NULL); rc = snd_ctl_add(card, ctl_mute); if (rc < 0) { - printk(TPACPI_ERR "Failed to create ALSA mute control\n"); - goto err_out; + printk(TPACPI_ERR "Failed to create ALSA mute control: %d\n", + rc); + goto err_exit; } data->ctl_mute_id = &ctl_mute->id; snd_card_set_dev(card, &tpacpi_pdev->dev); rc = snd_card_register(card); - -err_out: if (rc < 0) { - snd_card_free(card); - card = NULL; + printk(TPACPI_ERR "Failed to register ALSA card: %d\n", rc); + goto err_exit; } alsa_card = card; - return rc; + return 0; + +err_exit: + snd_card_free(card); + return 1; } #define TPACPI_VOL_Q_MUTEONLY 0x0001 /* Mute-only control available */ From ff850c339a1a6a7724537160c73cdc09a483fc5d Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 26 Dec 2009 22:52:15 -0200 Subject: [PATCH 0149/1626] thinkpad-acpi: make volume subdriver optional Allow the user to choose through Kconfig if the Console Audio Control interface (aka "volume subdriver") should be available or not. This not only saves some memory, but also allows the thinkpad-acpi driver to be built-in even if ALSA is modular when the console audio control interface is not wanted. This change fixes a build problem that is causing some annoyances, in a way that doesn't disable the entire driver on kernels without ALSA support. Signed-off-by: Henrique de Moraes Holschuh Cc: Ingo Molnar Cc: Amerigo Wang Cc: Helight Xu Cc: Takashi Iwai Signed-off-by: Len Brown --- drivers/platform/x86/Kconfig | 23 +++++++++++++++++++++++ drivers/platform/x86/thinkpad_acpi.c | 26 ++++++++++++++++++++++++++ 2 files changed, 49 insertions(+) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index ec4faffe6b05..2462dc30b39b 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -233,6 +233,29 @@ config THINKPAD_ACPI If you have an IBM or Lenovo ThinkPad laptop, say Y or M here. +config THINKPAD_ACPI_ALSA_SUPPORT + bool "Console audio control ALSA interface" + depends on THINKPAD_ACPI + depends on SND + depends on SND = y || THINKPAD_ACPI = SND + default y + ---help--- + Enables monitoring of the built-in console audio output control + (headphone and speakers), which is operated by the mute and (in + some ThinkPad models) volume hotkeys. + + If this option is enabled, ThinkPad-ACPI will export an ALSA card + with a single read-only mixer control, which should be used for + on-screen-display feedback purposes by the Desktop Environment. + + Optionally, the driver will also allow software control (the + ALSA mixer will be made read-write). Please refer to the driver + documentation for details. + + All IBM models have both volume and mute control. Newer Lenovo + models only have mute control (the volume hotkeys are just normal + keys and volume control is done through the main HDA mixer). + config THINKPAD_ACPI_DEBUGFACILITIES bool "Maintainer debug facilities" depends on THINKPAD_ACPI diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 9b7da9c96e76..e67e4feb35cb 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -6384,6 +6384,8 @@ static struct ibm_struct brightness_driver_data = { * and we leave them unchanged. */ +#ifdef CONFIG_THINKPAD_ACPI_ALSA_SUPPORT + #define TPACPI_ALSA_DRVNAME "ThinkPad EC" #define TPACPI_ALSA_SHRTNAME "ThinkPad Console Audio Control" #define TPACPI_ALSA_MIXERNAME TPACPI_ALSA_SHRTNAME @@ -7021,6 +7023,28 @@ static struct ibm_struct volume_driver_data = { .shutdown = volume_shutdown, }; +#else /* !CONFIG_THINKPAD_ACPI_ALSA_SUPPORT */ + +#define alsa_card NULL + +static void inline volume_alsa_notify_change(void) +{ +} + +static int __init volume_init(struct ibm_init_struct *iibm) +{ + printk(TPACPI_INFO + "volume: disabled as there is no ALSA support in this kernel\n"); + + return 1; +} + +static struct ibm_struct volume_driver_data = { + .name = "volume", +}; + +#endif /* CONFIG_THINKPAD_ACPI_ALSA_SUPPORT */ + /************************************************************************* * Fan subdriver */ @@ -8743,6 +8767,7 @@ MODULE_PARM_DESC(hotkey_report_mode, "used for backwards compatibility with userspace, " "see documentation"); +#ifdef CONFIG_THINKPAD_ACPI_ALSA_SUPPORT module_param_named(volume_mode, volume_mode, uint, 0444); MODULE_PARM_DESC(volume_mode, "Selects volume control strategy: " @@ -8765,6 +8790,7 @@ module_param_named(id, alsa_id, charp, 0444); MODULE_PARM_DESC(id, "ALSA id for the ACPI EC Mixer"); module_param_named(enable, alsa_enable, bool, 0444); MODULE_PARM_DESC(enable, "Enable the ALSA interface for the ACPI EC Mixer"); +#endif /* CONFIG_THINKPAD_ACPI_ALSA_SUPPORT */ #define TPACPI_PARAM(feature) \ module_param_call(feature, set_ibm_param, NULL, NULL, 0); \ From 169220f88f0f26f4450ac0bc8ff0f807b453ec58 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 26 Dec 2009 22:52:16 -0200 Subject: [PATCH 0150/1626] thinkpad-acpi: update volume subdriver documentation Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/laptops/thinkpad-acpi.txt | 58 +++++++++++++++++++++---- 1 file changed, 50 insertions(+), 8 deletions(-) diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 169091f75e6d..75afa1229fd7 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1092,8 +1092,8 @@ WARNING: its level up and down at every change. -Volume control --------------- +Volume control (Console Audio control) +-------------------------------------- procfs: /proc/acpi/ibm/volume ALSA: "ThinkPad Console Audio Control", default ID: "ThinkPadEC" @@ -1110,9 +1110,53 @@ the desktop environment to just provide on-screen-display feedback. Software volume control should be done only in the main AC97/HDA mixer. -This feature allows volume control on ThinkPad models with a digital -volume knob (when available, not all models have it), as well as -mute/unmute control. The available commands are: + +About the ThinkPad Console Audio control: + +ThinkPads have a built-in amplifier and muting circuit that drives the +console headphone and speakers. This circuit is after the main AC97 +or HDA mixer in the audio path, and under exclusive control of the +firmware. + +ThinkPads have three special hotkeys to interact with the console +audio control: volume up, volume down and mute. + +It is worth noting that the normal way the mute function works (on +ThinkPads that do not have a "mute LED") is: + +1. Press mute to mute. It will *always* mute, you can press it as + many times as you want, and the sound will remain mute. + +2. Press either volume key to unmute the ThinkPad (it will _not_ + change the volume, it will just unmute). + +This is a very superior design when compared to the cheap software-only +mute-toggle solution found on normal consumer laptops: you can be +absolutely sure the ThinkPad will not make noise if you press the mute +button, no matter the previous state. + +The IBM ThinkPads, and the earlier Lenovo ThinkPads have variable-gain +amplifiers driving the speakers and headphone output, and the firmware +also handles volume control for the headphone and speakers on these +ThinkPads without any help from the operating system (this volume +control stage exists after the main AC97 or HDA mixer in the audio +path). + +The newer Lenovo models only have firmware mute control, and depend on +the main HDA mixer to do volume control (which is done by the operating +system). In this case, the volume keys are filtered out for unmute +key press (there are some firmware bugs in this area) and delivered as +normal key presses to the operating system (thinkpad-acpi is not +involved). + + +The ThinkPad-ACPI volume control: + +The preferred way to interact with the Console Audio control is the +ALSA interface. + +The legacy procfs interface allows one to read the current state, +and if volume control is enabled, accepts the following commands: echo up >/proc/acpi/ibm/volume echo down >/proc/acpi/ibm/volume @@ -1121,12 +1165,10 @@ mute/unmute control. The available commands are: echo 'level ' >/proc/acpi/ibm/volume The number range is 0 to 14 although not all of them may be -distinct. The unmute the volume after the mute command, use either the +distinct. To unmute the volume after the mute command, use either the up or down command (the level command will not unmute the volume), or the unmute command. -The current volume level and mute state is shown in the file. - You can use the volume_capabilities parameter to tell the driver whether your thinkpad has volume control or mute-only control: volume_capabilities=1 for mixers with mute and volume control, From 6e5b08ee941af38cfc6456158e7e04c1bc49306f Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 26 Dec 2009 22:52:17 -0200 Subject: [PATCH 0151/1626] thinkpad-acpi: improve Kconfig help text Document that rfkill and ALSA functionality exists, but requires the subsystems to be available, and not modular if thinkpad-acpi is not modular. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/platform/x86/Kconfig | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 2462dc30b39b..db32c25e3605 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -231,6 +231,11 @@ config THINKPAD_ACPI This driver was formerly known as ibm-acpi. + Extra functionality will be available if the rfkill (CONFIG_RFKILL) + and/or ALSA (CONFIG_SND) subsystems are available in the kernel. + Note that if you want ThinkPad-ACPI to be built-in instead of + modular, ALSA and rfkill will also have to be built-in. + If you have an IBM or Lenovo ThinkPad laptop, say Y or M here. config THINKPAD_ACPI_ALSA_SUPPORT From 7583605b6d29f1f7f6fc505b883328089f3485ad Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 24 Dec 2009 05:31:03 +0000 Subject: [PATCH 0152/1626] ucc_geth: Fix empty TX queue processing Following oops was seen with the ucc_geth driver: Unable to handle kernel paging request for data at address 0x00000058 Faulting instruction address: 0xc024f2fc Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c024f2fc] skb_recycle_check+0x14/0x100 LR [e30aa0a4] ucc_geth_poll+0xd8/0x4e0 [ucc_geth_driver] Call Trace: [df857d50] [c000b03c] __ipipe_grab_irq+0x3c/0xa4 (unreliable) [df857d60] [e30aa0a4] ucc_geth_poll+0xd8/0x4e0 [ucc_geth_driver] [df857dd0] [c0258cf8] net_rx_action+0xf8/0x1b8 [df857e10] [c0032a38] __do_softirq+0xb8/0x13c [df857e60] [c00065cc] do_softirq+0xa0/0xac [...] This is because ucc_geth_tx() tries to process an empty queue when queues are logically stopped. Stopping the queues doesn't disable polling, and since nowadays ucc_geth_tx() is actually called from the polling routine, the oops above might pop up. Fix this by removing 'netif_queue_stopped() == 0' check. Reported-by: Lennart Sorensen Signed-off-by: Anton Vorontsov Tested-by: Lennart Sorensen Cc: Stable [2.6.32] Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index afaf088b72ea..0f8c99e845dd 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -3273,7 +3273,7 @@ static int ucc_geth_tx(struct net_device *dev, u8 txQ) /* Handle the transmitted buffer and release */ /* the BD to be used with the current frame */ - if ((bd == ugeth->txBd[txQ]) && (netif_queue_stopped(dev) == 0)) + if (bd == ugeth->txBd[txQ]) /* queue empty? */ break; dev->stats.tx_packets++; From 08b5e1c91ce95793c59a59529a362a1bcc81faae Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 24 Dec 2009 05:31:05 +0000 Subject: [PATCH 0153/1626] ucc_geth: Fix netdev watchdog triggering on link changes Since commit 864fdf884e82bacbe8ca5e93bd43393a61d2e2b4 ("ucc_geth: Fix hangs after switching from full to half duplex") ucc_geth driver disables the controller during MAC configuration changes. Though, disabling the controller might take quite awhile, and so the netdev watchdog might get upset: NETDEV WATCHDOG: eth2 (ucc_geth): transmit queue 0 timed out ------------[ cut here ]------------ Badness at c02729a8 [verbose debug info unavailable] NIP: c02729a8 LR: c02729a8 CTR: c01b6088 REGS: c0451c40 TRAP: 0700 Not tainted (2.6.32-trunk-8360e) [...] NIP [c02729a8] dev_watchdog+0x280/0x290 LR [c02729a8] dev_watchdog+0x280/0x290 Call Trace: [c0451cf0] [c02729a8] dev_watchdog+0x280/0x290 (unreliable) [c0451d50] [c00377c4] run_timer_softirq+0x164/0x224 [c0451da0] [c0032a38] __do_softirq+0xb8/0x13c [c0451df0] [c00065cc] do_softirq+0xa0/0xac [c0451e00] [c003280c] irq_exit+0x7c/0x9c [c0451e10] [c00640c4] __ipipe_sync_stage+0x248/0x24c [...] This patch fixes the issue by detaching the netdev during the time we change the configuration. Reported-by: Lennart Sorensen Signed-off-by: Anton Vorontsov Tested-by: Lennart Sorensen Cc: Stable [2.6.32] Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 0f8c99e845dd..7fff4c5a1693 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1563,7 +1563,10 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode) static void ugeth_quiesce(struct ucc_geth_private *ugeth) { - /* Wait for and prevent any further xmits. */ + /* Prevent any further xmits, plus detach the device. */ + netif_device_detach(ugeth->ndev); + + /* Wait for any current xmits to finish. */ netif_tx_disable(ugeth->ndev); /* Disable the interrupt to avoid NAPI rescheduling. */ @@ -1577,7 +1580,7 @@ static void ugeth_activate(struct ucc_geth_private *ugeth) { napi_enable(&ugeth->napi); enable_irq(ugeth->ug_info->uf_info.irq); - netif_tx_wake_all_queues(ugeth->ndev); + netif_device_attach(ugeth->ndev); } /* Called every time the controller might need to be made From 08fafd8461c0ca8d1b389b7dc11d17e7b2331282 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 24 Dec 2009 05:31:20 +0000 Subject: [PATCH 0154/1626] ucc_geth: Don't needlessly change MAC settings in adjust_link() If PHY doesn't have an IRQ, phylib would poll for link changes, and would call adjust_link() every second. In that case we disable and enable the controller every second. Let's better check if there is actually anything changed, and, if so, change the MAC settings. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 7fff4c5a1693..41ad2f3697c7 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1651,25 +1651,28 @@ static void adjust_link(struct net_device *dev) ugeth->oldspeed = phydev->speed; } - /* - * To change the MAC configuration we need to disable the - * controller. To do so, we have to either grab ugeth->lock, - * which is a bad idea since 'graceful stop' commands might - * take quite a while, or we can quiesce driver's activity. - */ - ugeth_quiesce(ugeth); - ugeth_disable(ugeth, COMM_DIR_RX_AND_TX); - - out_be32(&ug_regs->maccfg2, tempval); - out_be32(&uf_regs->upsmr, upsmr); - - ugeth_enable(ugeth, COMM_DIR_RX_AND_TX); - ugeth_activate(ugeth); - if (!ugeth->oldlink) { new_state = 1; ugeth->oldlink = 1; } + + if (new_state) { + /* + * To change the MAC configuration we need to disable + * the controller. To do so, we have to either grab + * ugeth->lock, which is a bad idea since 'graceful + * stop' commands might take quite a while, or we can + * quiesce driver's activity. + */ + ugeth_quiesce(ugeth); + ugeth_disable(ugeth, COMM_DIR_RX_AND_TX); + + out_be32(&ug_regs->maccfg2, tempval); + out_be32(&uf_regs->upsmr, upsmr); + + ugeth_enable(ugeth, COMM_DIR_RX_AND_TX); + ugeth_activate(ugeth); + } } else if (ugeth->oldlink) { new_state = 1; ugeth->oldlink = 0; From 80924e5f7dbe00d964b7249160c7ca25fa3cd889 Mon Sep 17 00:00:00 2001 From: Vitaliy Gusev Date: Fri, 25 Dec 2009 07:17:43 +0000 Subject: [PATCH 0155/1626] tun: use tun_sk instead container_of Using macro tun_sk is more clear and shorter. However tun.c has tun_sk, but doesn't use it. Signed-off-by: Vitaliy Gusev Signed-off-by: David S. Miller --- drivers/net/tun.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 01e99f22210e..2834a01bae24 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -849,13 +849,13 @@ static void tun_sock_write_space(struct sock *sk) if (sk->sk_sleep && waitqueue_active(sk->sk_sleep)) wake_up_interruptible_sync(sk->sk_sleep); - tun = container_of(sk, struct tun_sock, sk)->tun; + tun = tun_sk(sk)->tun; kill_fasync(&tun->fasync, SIGIO, POLL_OUT); } static void tun_sock_destruct(struct sock *sk) { - free_netdev(container_of(sk, struct tun_sock, sk)->tun->dev); + free_netdev(tun_sk(sk)->tun->dev); } static struct proto tun_proto = { @@ -990,7 +990,7 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) sk->sk_write_space = tun_sock_write_space; sk->sk_sndbuf = INT_MAX; - container_of(sk, struct tun_sock, sk)->tun = tun; + tun_sk(sk)->tun = tun; security_tun_dev_post_create(sk); From f74dac0859bd9678b289ad9dc215026fd7ce033e Mon Sep 17 00:00:00 2001 From: Sandeep Gopalpet Date: Thu, 24 Dec 2009 03:13:06 +0000 Subject: [PATCH 0156/1626] gianfar: Fix gianfar select_queue bogosity The gfar_select_queue() function was used to set queue mapping only for forwarding/bridging applications and the condition for locally generated packets was completely ignored. The solution is to remove the gfar_select_queue() function and use skb_record_rx_queue to set queue mapping for forwarding/bridging applications. This will ensure that in case of forwarding/bridging applications txq = rxq will be selected and skb_tx_hash will be used to pick up a txq for locally generated packets. Signed-off-by: Sandeep Gopalpet Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index e0620d084644..8bd3c9f17532 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -143,7 +143,6 @@ void gfar_start(struct net_device *dev); static void gfar_clear_exact_match(struct net_device *dev); static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr); static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -u16 gfar_select_queue(struct net_device *dev, struct sk_buff *skb); MODULE_AUTHOR("Freescale Semiconductor, Inc"); MODULE_DESCRIPTION("Gianfar Ethernet Driver"); @@ -455,7 +454,6 @@ static const struct net_device_ops gfar_netdev_ops = { .ndo_set_multicast_list = gfar_set_multi, .ndo_tx_timeout = gfar_timeout, .ndo_do_ioctl = gfar_ioctl, - .ndo_select_queue = gfar_select_queue, .ndo_get_stats = gfar_get_stats, .ndo_vlan_rx_register = gfar_vlan_rx_register, .ndo_set_mac_address = eth_mac_addr, @@ -506,10 +504,6 @@ static inline int gfar_uses_fcb(struct gfar_private *priv) return priv->vlgrp || priv->rx_csum_enable; } -u16 gfar_select_queue(struct net_device *dev, struct sk_buff *skb) -{ - return skb_get_queue_mapping(skb); -} static void free_tx_pointers(struct gfar_private *priv) { int i = 0; @@ -2470,10 +2464,11 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, fcb = (struct rxfcb *)skb->data; /* Remove the FCB from the skb */ - skb_set_queue_mapping(skb, fcb->rq); /* Remove the padded bytes, if there are any */ - if (amount_pull) + if (amount_pull) { + skb_record_rx_queue(skb, fcb->rq); skb_pull(skb, amount_pull); + } if (priv->rx_csum_enable) gfar_rx_checksum(skb, fcb); @@ -2554,7 +2549,7 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit) /* Remove the FCS from the packet length */ skb_put(skb, pkt_len); rx_queue->stats.rx_bytes += pkt_len; - + skb_record_rx_queue(skb, rx_queue->qindex); gfar_process_frame(dev, skb, amount_pull); } else { From 1f04493123763f5b8bc6d5de9aed0222345c052c Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 24 Dec 2009 08:11:24 +0000 Subject: [PATCH 0157/1626] Fix MAC address access in 3c507, ibmlana, pcnet32 and libertas Commit f001fde5eadd915f4858d22ed70d7040f48767cf changed net_device.dev_addr from a 32-byte array to a pointer. I found 4 ethernet drivers which rely on sizeof(dev_addr), which are now only copying 4 bytes of the address information on 32bit systems. Fix them to use ETH_ALEN. Signed-off-by: Daniel Drake Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/3c507.c | 4 ++-- drivers/net/ibmlana.c | 3 ++- drivers/net/pcnet32.c | 3 ++- drivers/net/wireless/libertas/mesh.c | 4 ++-- 4 files changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/3c507.c b/drivers/net/3c507.c index fbc231153e55..77cf0901a441 100644 --- a/drivers/net/3c507.c +++ b/drivers/net/3c507.c @@ -56,6 +56,7 @@ static const char version[] = #include #include #include +#include #include #include #include @@ -734,8 +735,7 @@ static void init_82586_mem(struct net_device *dev) memcpy_toio(lp->base, init_words + 5, sizeof(init_words) - 10); /* Fill in the station address. */ - memcpy_toio(lp->base+SA_OFFSET, dev->dev_addr, - sizeof(dev->dev_addr)); + memcpy_toio(lp->base+SA_OFFSET, dev->dev_addr, ETH_ALEN); /* The Tx-block list is written as needed. We just set up the values. */ lp->tx_cmd_link = IDLELOOP + 4; diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c index 090a6d3af112..052c74091d91 100644 --- a/drivers/net/ibmlana.c +++ b/drivers/net/ibmlana.c @@ -87,6 +87,7 @@ History: #include #include #include +#include #include #include @@ -988,7 +989,7 @@ static int __devinit ibmlana_init_one(struct device *kdev) /* copy out MAC address */ - for (z = 0; z < sizeof(dev->dev_addr); z++) + for (z = 0; z < ETH_ALEN; z++) dev->dev_addr[z] = inb(dev->base_addr + MACADDRPROM + z); /* print config */ diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index dcc67a35e8f2..e154677ff706 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -45,6 +45,7 @@ static const char *const version = #include #include #include +#include #include #include #include @@ -1765,7 +1766,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) /* if the ethernet address is not valid, force to 00:00:00:00:00:00 */ if (!is_valid_ether_addr(dev->perm_addr)) - memset(dev->dev_addr, 0, sizeof(dev->dev_addr)); + memset(dev->dev_addr, 0, ETH_ALEN); if (pcnet32_debug & NETIF_MSG_PROBE) { printk(" %pM", dev->dev_addr); diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c index 2f91c9b808af..92b7a357a5e4 100644 --- a/drivers/net/wireless/libertas/mesh.c +++ b/drivers/net/wireless/libertas/mesh.c @@ -2,6 +2,7 @@ #include #include #include +#include #include #include #include @@ -351,8 +352,7 @@ int lbs_add_mesh(struct lbs_private *priv) mesh_dev->netdev_ops = &mesh_netdev_ops; mesh_dev->ethtool_ops = &lbs_ethtool_ops; - memcpy(mesh_dev->dev_addr, priv->dev->dev_addr, - sizeof(priv->dev->dev_addr)); + memcpy(mesh_dev->dev_addr, priv->dev->dev_addr, ETH_ALEN); SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent); From c99a3d2e04c63a795e13c26d6f2982731e1f1ae0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 23 Dec 2009 03:27:10 +0000 Subject: [PATCH 0158/1626] bond_3ad.c avoid possible null deref A few lines earlier we assume that best->slave could be either null or non-null so we should check it here as well. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 0fb7a4964e75..822f586d72af 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -1580,7 +1580,7 @@ static void ad_agg_selection_logic(struct aggregator *agg) // check if any partner replys if (best->is_individual) { pr_warning("%s: Warning: No 802.3ad response from the link partner for any adapters in the bond\n", - best->slave->dev->master->name); + best->slave ? best->slave->dev->master->name : "NULL"); } best->is_active = 1; From 96c5340147584481ef0c0afbb5423f7563c1d24a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 25 Dec 2009 23:30:02 +0000 Subject: [PATCH 0159/1626] NET: XFRM: Fix spelling of neighbour. Signed-off-by: Ralf Baechle net/xfrm/xfrm_policy.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) Signed-off-by: David S. Miller --- net/xfrm/xfrm_policy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index cb81ca35b0d6..4725a549ad4d 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1445,7 +1445,7 @@ static struct dst_entry *xfrm_bundle_create(struct xfrm_policy *policy, if (!dev) goto free_dst; - /* Copy neighbout for reachability confirmation */ + /* Copy neighbour for reachability confirmation */ dst0->neighbour = neigh_clone(dst->neighbour); xfrm_init_path((struct xfrm_dst *)dst0, dst, nfheader_len); From 411fe85c7653f51403c2a6fd9026b0db2ab19478 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 27 Dec 2009 10:25:58 +0100 Subject: [PATCH 0160/1626] ALSA: hda - Don't cache beep controls The beep control verbs don't need to be cached for resume. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_beep.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index 5fe34a8d8c81..ca3c57a5f888 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -42,7 +42,7 @@ static void snd_hda_generate_beep(struct work_struct *work) return; /* generate tone */ - snd_hda_codec_write_cache(codec, beep->nid, 0, + snd_hda_codec_write(codec, beep->nid, 0, AC_VERB_SET_BEEP_CONTROL, beep->tone); } @@ -119,7 +119,7 @@ static void snd_hda_do_detach(struct hda_beep *beep) beep->dev = NULL; cancel_work_sync(&beep->beep_work); /* turn off beep for sure */ - snd_hda_codec_write_cache(beep->codec, beep->nid, 0, + snd_hda_codec_write(beep->codec, beep->nid, 0, AC_VERB_SET_BEEP_CONTROL, 0); } @@ -192,7 +192,7 @@ int snd_hda_enable_beep_device(struct hda_codec *codec, int enable) beep->enabled = enable; if (!enable) { /* turn off beep */ - snd_hda_codec_write_cache(beep->codec, beep->nid, 0, + snd_hda_codec_write(beep->codec, beep->nid, 0, AC_VERB_SET_BEEP_CONTROL, 0); } if (beep->mode == HDA_BEEP_MODE_SWREG) { From 54f7190b23080c7ac32078ed6a346bdc591ebef1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 27 Dec 2009 13:27:39 +0100 Subject: [PATCH 0161/1626] ALSA: hda - Fix Oops at reloading beep devices The recent change for supporting dynamic beep device allocation caused a problem resulting in Oops at reloading the driver. Also, it ignores the error from input device registration. This patch fixes the wrong check in snd_hda_detach_beep_device(), and returns an error when the input device registration fails properly. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_beep.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index ca3c57a5f888..e4581a42ace5 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -239,8 +239,12 @@ int snd_hda_attach_beep_device(struct hda_codec *codec, int nid) mutex_init(&beep->mutex); if (beep->mode == HDA_BEEP_MODE_ON) { - beep->enabled = 1; - snd_hda_do_register(&beep->register_work); + int err = snd_hda_do_attach(beep); + if (err < 0) { + kfree(beep); + codec->beep = NULL; + return err; + } } return 0; @@ -253,7 +257,7 @@ void snd_hda_detach_beep_device(struct hda_codec *codec) if (beep) { cancel_work_sync(&beep->register_work); cancel_delayed_work(&beep->unregister_work); - if (beep->enabled) + if (beep->dev) snd_hda_do_detach(beep); codec->beep = NULL; kfree(beep); From fb341f572d26e0786167cd96b90cc4febed830cf Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Sat, 5 Dec 2009 12:34:11 -0200 Subject: [PATCH 0162/1626] KVM: MMU: remove prefault from invlpg handler The invlpg prefault optimization breaks Windows 2008 R2 occasionally. The visible effect is that the invlpg handler instantiates a pte which is, microseconds later, written with a different gfn by another vcpu. The OS could have other mechanisms to prevent a present translation from being used, which the hypervisor is unaware of. While the documentation states that the cpu is at liberty to prefetch tlb entries, it looks like this is not heeded, so remove tlb prefetch from invlpg. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- arch/x86/kvm/paging_tmpl.h | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index a6017132fba8..58a0f1e88596 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -455,8 +455,6 @@ out_unlock: static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva) { struct kvm_shadow_walk_iterator iterator; - pt_element_t gpte; - gpa_t pte_gpa = -1; int level; u64 *sptep; int need_flush = 0; @@ -470,10 +468,6 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva) if (level == PT_PAGE_TABLE_LEVEL || ((level == PT_DIRECTORY_LEVEL && is_large_pte(*sptep))) || ((level == PT_PDPE_LEVEL && is_large_pte(*sptep)))) { - struct kvm_mmu_page *sp = page_header(__pa(sptep)); - - pte_gpa = (sp->gfn << PAGE_SHIFT); - pte_gpa += (sptep - sp->spt) * sizeof(pt_element_t); if (is_shadow_present_pte(*sptep)) { rmap_remove(vcpu->kvm, sptep); @@ -492,18 +486,6 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva) if (need_flush) kvm_flush_remote_tlbs(vcpu->kvm); spin_unlock(&vcpu->kvm->mmu_lock); - - if (pte_gpa == -1) - return; - if (kvm_read_guest_atomic(vcpu->kvm, pte_gpa, &gpte, - sizeof(pt_element_t))) - return; - if (is_present_gpte(gpte) && (gpte & PT_ACCESSED_MASK)) { - if (mmu_topup_memory_caches(vcpu)) - return; - kvm_mmu_pte_write(vcpu, pte_gpa, (const u8 *)&gpte, - sizeof(pt_element_t), 0); - } } static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr) From fae3a3536a6fecedebd49fa847f810e599bfb132 Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Tue, 15 Dec 2009 10:28:07 +0800 Subject: [PATCH 0163/1626] KVM: Fix possible circular locking in kvm_vm_ioctl_assign_device() One possible order is: KVM_CREATE_IRQCHIP ioctl(took kvm->lock) -> kvm_iobus_register_dev() -> down_write(kvm->slots_lock). The other one is in kvm_vm_ioctl_assign_device(), which take kvm->slots_lock first, then kvm->lock. Update the comment of lock order as well. Observe it due to kernel locking debug warnings. Cc: stable@kernel.org Signed-off-by: Sheng Yang Signed-off-by: Avi Kivity --- virt/kvm/assigned-dev.c | 6 +++--- virt/kvm/kvm_main.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/virt/kvm/assigned-dev.c b/virt/kvm/assigned-dev.c index fd9c097b760a..f73de631e3ee 100644 --- a/virt/kvm/assigned-dev.c +++ b/virt/kvm/assigned-dev.c @@ -508,8 +508,8 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm, struct kvm_assigned_dev_kernel *match; struct pci_dev *dev; - down_read(&kvm->slots_lock); mutex_lock(&kvm->lock); + down_read(&kvm->slots_lock); match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head, assigned_dev->assigned_dev_id); @@ -573,8 +573,8 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm, } out: - mutex_unlock(&kvm->lock); up_read(&kvm->slots_lock); + mutex_unlock(&kvm->lock); return r; out_list_del: list_del(&match->list); @@ -585,8 +585,8 @@ out_put: pci_dev_put(dev); out_free: kfree(match); - mutex_unlock(&kvm->lock); up_read(&kvm->slots_lock); + mutex_unlock(&kvm->lock); return r; } diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index b5af88167613..7db071ba466c 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -64,7 +64,7 @@ MODULE_LICENSE("GPL"); /* * Ordering of locks: * - * kvm->slots_lock --> kvm->lock --> kvm->irq_lock + * kvm->lock --> kvm->slots_lock --> kvm->irq_lock */ DEFINE_SPINLOCK(kvm_lock); From 6e24a6eff4571002cd48b99a2b92dc829ce39cb9 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Mon, 14 Dec 2009 17:37:35 -0200 Subject: [PATCH 0164/1626] KVM: LAPIC: make sure IRR bitmap is scanned after vm load The vcpus are initialized with irr_pending set to false, but loading the LAPIC registers with pending IRR fails to reset the irr_pending variable. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- arch/x86/kvm/lapic.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index cd60c0bd1b32..3063a0c4858b 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -1150,6 +1150,7 @@ void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu) hrtimer_cancel(&apic->lapic_timer.timer); update_divide_count(apic); start_apic_timer(apic); + apic->irr_pending = true; } void __kvm_migrate_apic_timer(struct kvm_vcpu *vcpu) From dab4b911a5327859bb8f969249c6978c26cd4853 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Sun, 6 Dec 2009 18:24:15 +0100 Subject: [PATCH 0165/1626] KVM: x86: Extend KVM_SET_VCPU_EVENTS with selective updates User space may not want to overwrite asynchronously changing VCPU event states on write-back. So allow to skip nmi.pending and sipi_vector by setting corresponding bits in the flags field of kvm_vcpu_events. [avi: advertise the bits in KVM_GET_VCPU_EVENTS] Signed-off-by: Jan Kiszka Signed-off-by: Avi Kivity --- Documentation/kvm/api.txt | 10 +++++++++- arch/x86/include/asm/kvm.h | 4 ++++ arch/x86/kvm/x86.c | 12 ++++++++---- 3 files changed, 21 insertions(+), 5 deletions(-) diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt index e1a114161027..2811e452f756 100644 --- a/Documentation/kvm/api.txt +++ b/Documentation/kvm/api.txt @@ -685,7 +685,7 @@ struct kvm_vcpu_events { __u8 pad; } nmi; __u32 sipi_vector; - __u32 flags; /* must be zero */ + __u32 flags; }; 4.30 KVM_SET_VCPU_EVENTS @@ -701,6 +701,14 @@ vcpu. See KVM_GET_VCPU_EVENTS for the data structure. +Fields that may be modified asynchronously by running VCPUs can be excluded +from the update. These fields are nmi.pending and sipi_vector. Keep the +corresponding bits in the flags field cleared to suppress overwriting the +current in-kernel state. The bits are: + +KVM_VCPUEVENT_VALID_NMI_PENDING - transfer nmi.pending to the kernel +KVM_VCPUEVENT_VALID_SIPI_VECTOR - transfer sipi_vector + 5. The kvm_run structure diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h index 950df434763f..f46b79f6c16c 100644 --- a/arch/x86/include/asm/kvm.h +++ b/arch/x86/include/asm/kvm.h @@ -254,6 +254,10 @@ struct kvm_reinject_control { __u8 reserved[31]; }; +/* When set in flags, include corresponding fields on KVM_SET_VCPU_EVENTS */ +#define KVM_VCPUEVENT_VALID_NMI_PENDING 0x00000001 +#define KVM_VCPUEVENT_VALID_SIPI_VECTOR 0x00000002 + /* for KVM_GET/SET_VCPU_EVENTS */ struct kvm_vcpu_events { struct { diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 9d068966fb2a..6651dbf58675 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1913,7 +1913,8 @@ static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu, events->sipi_vector = vcpu->arch.sipi_vector; - events->flags = 0; + events->flags = (KVM_VCPUEVENT_VALID_NMI_PENDING + | KVM_VCPUEVENT_VALID_SIPI_VECTOR); vcpu_put(vcpu); } @@ -1921,7 +1922,8 @@ static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu, static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu, struct kvm_vcpu_events *events) { - if (events->flags) + if (events->flags & ~(KVM_VCPUEVENT_VALID_NMI_PENDING + | KVM_VCPUEVENT_VALID_SIPI_VECTOR)) return -EINVAL; vcpu_load(vcpu); @@ -1938,10 +1940,12 @@ static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu, kvm_pic_clear_isr_ack(vcpu->kvm); vcpu->arch.nmi_injected = events->nmi.injected; - vcpu->arch.nmi_pending = events->nmi.pending; + if (events->flags & KVM_VCPUEVENT_VALID_NMI_PENDING) + vcpu->arch.nmi_pending = events->nmi.pending; kvm_x86_ops->set_nmi_mask(vcpu, events->nmi.masked); - vcpu->arch.sipi_vector = events->sipi_vector; + if (events->flags & KVM_VCPUEVENT_VALID_SIPI_VECTOR) + vcpu->arch.sipi_vector = events->sipi_vector; vcpu_put(vcpu); From a662b8135a1f9fee7d3f9129498cb03f3d6ce772 Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Thu, 17 Dec 2009 17:05:03 -0800 Subject: [PATCH 0166/1626] KVM: ia64: fix build breakage due to host spinlock change Len Brown pointed out that allmodconfig is broken for ia64 because of: arch/ia64/kvm/vmm.c: In function 'vmm_spin_unlock': arch/ia64/kvm/vmm.c:70: error: 'spinlock_t' has no member named 'raw_lock' KVM has it's own spinlock routines. It should not depend on the base kernel spinlock_t type (which changed when ia64 switched to ticket locks). Define its own vmm_spinlock_t type. Signed-off-by: Tony Luck Signed-off-by: Avi Kivity --- arch/ia64/kvm/vcpu.h | 9 ++++++--- arch/ia64/kvm/vmm.c | 4 ++-- arch/ia64/kvm/vtlb.c | 2 +- 3 files changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/ia64/kvm/vcpu.h b/arch/ia64/kvm/vcpu.h index 360724d3ae69..988911b4cc7a 100644 --- a/arch/ia64/kvm/vcpu.h +++ b/arch/ia64/kvm/vcpu.h @@ -388,6 +388,9 @@ static inline u64 __gpfn_is_io(u64 gpfn) #define _vmm_raw_spin_lock(x) do {}while(0) #define _vmm_raw_spin_unlock(x) do {}while(0) #else +typedef struct { + volatile unsigned int lock; +} vmm_spinlock_t; #define _vmm_raw_spin_lock(x) \ do { \ __u32 *ia64_spinlock_ptr = (__u32 *) (x); \ @@ -405,12 +408,12 @@ static inline u64 __gpfn_is_io(u64 gpfn) #define _vmm_raw_spin_unlock(x) \ do { barrier(); \ - ((spinlock_t *)x)->raw_lock.lock = 0; } \ + ((vmm_spinlock_t *)x)->lock = 0; } \ while (0) #endif -void vmm_spin_lock(spinlock_t *lock); -void vmm_spin_unlock(spinlock_t *lock); +void vmm_spin_lock(vmm_spinlock_t *lock); +void vmm_spin_unlock(vmm_spinlock_t *lock); enum { I_TLB = 1, D_TLB = 2 diff --git a/arch/ia64/kvm/vmm.c b/arch/ia64/kvm/vmm.c index f4b4c899bb6c..7a62f75778c5 100644 --- a/arch/ia64/kvm/vmm.c +++ b/arch/ia64/kvm/vmm.c @@ -60,12 +60,12 @@ static void __exit kvm_vmm_exit(void) return ; } -void vmm_spin_lock(spinlock_t *lock) +void vmm_spin_lock(vmm_spinlock_t *lock) { _vmm_raw_spin_lock(lock); } -void vmm_spin_unlock(spinlock_t *lock) +void vmm_spin_unlock(vmm_spinlock_t *lock) { _vmm_raw_spin_unlock(lock); } diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c index 20b3852f7a6e..4332f7ee5203 100644 --- a/arch/ia64/kvm/vtlb.c +++ b/arch/ia64/kvm/vtlb.c @@ -182,7 +182,7 @@ void mark_pages_dirty(struct kvm_vcpu *v, u64 pte, u64 ps) { u64 i, dirty_pages = 1; u64 base_gfn = (pte&_PAGE_PPN_MASK) >> PAGE_SHIFT; - spinlock_t *lock = __kvm_va(v->arch.dirty_log_lock_pa); + vmm_spinlock_t *lock = __kvm_va(v->arch.dirty_log_lock_pa); void *dirty_bitmap = (void *)KVM_MEM_DIRTY_LOG_BASE; dirty_pages <<= ps <= PAGE_SHIFT ? 0 : ps - PAGE_SHIFT; From 5279aeb4b96cbdac22a0c2f8137dd0bbc35f02b8 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Sat, 19 Dec 2009 18:07:39 +0100 Subject: [PATCH 0167/1626] KVM: powerpc: Fix mtsrin in book3s_64 mmu We were shifting the Ks/Kp/N bits one bit too far on mtsrin. It took me some time to figure that out, so I also put in some debugging and a comment explaining the conversion. This fixes current OpenBIOS boot on PPC64 KVM. Signed-off-by: Alexander Graf Signed-off-by: Avi Kivity --- arch/powerpc/kvm/book3s_64_mmu.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kvm/book3s_64_mmu.c b/arch/powerpc/kvm/book3s_64_mmu.c index 5598f88f142e..e4beeb371a73 100644 --- a/arch/powerpc/kvm/book3s_64_mmu.c +++ b/arch/powerpc/kvm/book3s_64_mmu.c @@ -390,6 +390,26 @@ static void kvmppc_mmu_book3s_64_mtsrin(struct kvm_vcpu *vcpu, u32 srnum, { u64 rb = 0, rs = 0; + /* + * According to Book3 2.01 mtsrin is implemented as: + * + * The SLB entry specified by (RB)32:35 is loaded from register + * RS, as follows. + * + * SLBE Bit Source SLB Field + * + * 0:31 0x0000_0000 ESID-0:31 + * 32:35 (RB)32:35 ESID-32:35 + * 36 0b1 V + * 37:61 0x00_0000|| 0b0 VSID-0:24 + * 62:88 (RS)37:63 VSID-25:51 + * 89:91 (RS)33:35 Ks Kp N + * 92 (RS)36 L ((RS)36 must be 0b0) + * 93 0b0 C + */ + + dprintk("KVM MMU: mtsrin(0x%x, 0x%lx)\n", srnum, value); + /* ESID = srnum */ rb |= (srnum & 0xf) << 28; /* Set the valid bit */ @@ -400,7 +420,7 @@ static void kvmppc_mmu_book3s_64_mtsrin(struct kvm_vcpu *vcpu, u32 srnum, /* VSID = VSID */ rs |= (value & 0xfffffff) << 12; /* flags = flags */ - rs |= ((value >> 27) & 0xf) << 9; + rs |= ((value >> 28) & 0x7) << 9; kvmppc_mmu_book3s_64_slbmte(vcpu, rs, rb); } From b4329db0d7fd5a233866e799ad3bae8639e90c71 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 18 Dec 2009 09:41:43 +0100 Subject: [PATCH 0168/1626] KVM: get rid of kvm_create_vm() unused label warning on s390 arch/s390/kvm/../../../virt/kvm/kvm_main.c: In function 'kvm_create_vm': arch/s390/kvm/../../../virt/kvm/kvm_main.c:409: warning: label 'out_err' defined but not used Signed-off-by: Heiko Carstens Signed-off-by: Avi Kivity --- virt/kvm/kvm_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 7db071ba466c..a944be392d6e 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -406,8 +406,11 @@ static struct kvm *kvm_create_vm(void) out: return kvm; +#if defined(KVM_COALESCED_MMIO_PAGE_OFFSET) || \ + (defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER)) out_err: hardware_disable_all(); +#endif out_err_nodisable: kfree(kvm); return ERR_PTR(r); From d4db3f164529013b11a171bb1bd38e8681ddaec8 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Sun, 27 Dec 2009 21:36:57 -0200 Subject: [PATCH 0169/1626] perf record: We should fork only if a program was specified to run MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit IOW: Now 'perf record -a' works, this was a bug introduced in: 856e96608a72412d319e498a3a7c557571f811bd "perf record: Properly synchronize child creation" Also fix the -C usage, i.e. allow for profiling all the tasks in one CPU. Reported-by: Pekka Enberg Signed-off-by: Arnaldo Carvalho de Melo Cc: Frédéric Weisbecker Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Paul Mackerras LKML-Reference: <1261957026-15580-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar --- tools/perf/builtin-record.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 63136d0534d4..265425322734 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -402,7 +402,7 @@ static void atexit_header(void) perf_header__write(&session->header, output, true); } -static int __cmd_record(int argc __used, const char **argv) +static int __cmd_record(int argc, const char **argv) { int i, counter; struct stat st; @@ -411,6 +411,7 @@ static int __cmd_record(int argc __used, const char **argv) int err; unsigned long waking = 0; int child_ready_pipe[2], go_pipe[2]; + const bool forks = target_pid == -1 && argc > 0; char buf; page_size = sysconf(_SC_PAGE_SIZE); @@ -422,7 +423,7 @@ static int __cmd_record(int argc __used, const char **argv) signal(SIGCHLD, sig_handler); signal(SIGINT, sig_handler); - if (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0) { + if (forks && (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0)) { perror("failed to create pipes"); exit(-1); } @@ -483,7 +484,7 @@ static int __cmd_record(int argc __used, const char **argv) atexit(atexit_header); - if (target_pid == -1) { + if (forks) { pid = fork(); if (pid < 0) { perror("failed to fork"); @@ -550,7 +551,7 @@ static int __cmd_record(int argc __used, const char **argv) return err; } - if (!system_wide) + if (!system_wide && profile_cpu == -1) event__synthesize_thread(pid, process_synthesized_event, session); else @@ -569,7 +570,8 @@ static int __cmd_record(int argc __used, const char **argv) /* * Let the child rip */ - close(go_pipe[1]); + if (forks) + close(go_pipe[1]); for (;;) { int hits = samples; @@ -667,7 +669,7 @@ int cmd_record(int argc, const char **argv, const char *prefix __used) argc = parse_options(argc, argv, options, record_usage, PARSE_OPT_STOP_AT_NON_OPTION); - if (!argc && target_pid == -1 && (!system_wide || profile_cpu == -1)) + if (!argc && target_pid == -1 && !system_wide && profile_cpu == -1) usage_with_options(record_usage, options); symbol__init(); From 049ae80b8790bd3c150d78e3351dcc491e9f2416 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Sun, 27 Dec 2009 21:36:58 -0200 Subject: [PATCH 0170/1626] perf tools: Add missing header files to LIB_H Makefile variable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit So that changes in them trigger rebuilds, like when we're doing bisects. Signed-off-by: Arnaldo Carvalho de Melo Cc: Frédéric Weisbecker Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Paul Mackerras LKML-Reference: <1261957026-15580-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar --- tools/perf/Makefile | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 4390d225686d..652a470b5f74 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -343,13 +343,18 @@ LIB_H += util/include/linux/string.h LIB_H += util/include/linux/types.h LIB_H += util/include/asm/asm-offsets.h LIB_H += util/include/asm/bitops.h +LIB_H += util/include/asm/bug.h LIB_H += util/include/asm/byteorder.h LIB_H += util/include/asm/swab.h LIB_H += util/include/asm/system.h LIB_H += util/include/asm/uaccess.h LIB_H += perf.h +LIB_H += util/cache.h +LIB_H += util/callchain.h +LIB_H += util/debug.h LIB_H += util/debugfs.h LIB_H += util/event.h +LIB_H += util/exec_cmd.h LIB_H += util/types.h LIB_H += util/levenshtein.h LIB_H += util/parse-options.h @@ -362,6 +367,7 @@ LIB_H += util/session.h LIB_H += util/strbuf.h LIB_H += util/string.h LIB_H += util/strlist.h +LIB_H += util/svghelper.h LIB_H += util/run-command.h LIB_H += util/sigchain.h LIB_H += util/symbol.h @@ -370,6 +376,8 @@ LIB_H += util/values.h LIB_H += util/sort.h LIB_H += util/hist.h LIB_H += util/thread.h +LIB_H += util/trace-event.h +LIB_H += util/trace-event-perl.h LIB_H += util/probe-finder.h LIB_H += util/probe-event.h From 0b413e44d64aeac36a096505a40fc2ff470872fa Mon Sep 17 00:00:00 2001 From: Tim Blechmann Date: Sun, 27 Dec 2009 14:43:06 +0100 Subject: [PATCH 0171/1626] perf: Rename perf_event_hw_event in design document perf_event_hw_event has been renamed to perf_event_attr. The design document was still using the old name, though. Signed-off-by: Tim Blechmann Cc: Peter Zijlstra Cc: Mike Galbraith Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker LKML-Reference: <4B37646A.90108@klingt.org> Signed-off-by: Ingo Molnar --- tools/perf/design.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/perf/design.txt b/tools/perf/design.txt index f000c30877ac..8d0de5130db3 100644 --- a/tools/perf/design.txt +++ b/tools/perf/design.txt @@ -21,7 +21,7 @@ There's one file descriptor per virtual counter used. The special file descriptor is opened via the perf_event_open() system call: - int sys_perf_event_open(struct perf_event_hw_event *hw_event_uptr, + int sys_perf_event_open(struct perf_event_attr *hw_event_uptr, pid_t pid, int cpu, int group_fd, unsigned long flags); @@ -32,9 +32,9 @@ can be used to set the blocking mode, etc. Multiple counters can be kept open at a time, and the counters can be poll()ed. -When creating a new counter fd, 'perf_event_hw_event' is: +When creating a new counter fd, 'perf_event_attr' is: -struct perf_event_hw_event { +struct perf_event_attr { /* * The MSB of the config word signifies if the rest contains cpu * specific (raw) counter configuration data, if unset, the next @@ -399,7 +399,7 @@ Notification of new events is possible through poll()/select()/epoll() and fcntl() managing signals. Normally a notification is generated for every page filled, however one can -additionally set perf_event_hw_event.wakeup_events to generate one every +additionally set perf_event_attr.wakeup_events to generate one every so many counter overflow events. Future work will include a splice() interface to the ring-buffer. From d015a092989d673df44a5ad6866dc5d5006b7a2a Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Mon, 28 Dec 2009 10:26:59 +0200 Subject: [PATCH 0172/1626] x86: Use KERN_DEFAULT log-level in __show_regs() Andrew Morton reported a strange looking kmemcheck warning: WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88004fba6c20) 0000000000000000310000000000000000000000000000002413000000c9ffff u u u u u u u u u u u u u u u u i i i i i i i i u u u u u u u u [] kmemleak_scan+0x25a/0x540 [] kmemleak_scan_thread+0x5b/0xe0 [] kthread+0x9e/0xb0 [] kernel_thread_helper+0x4/0x10 [] 0xffffffffffffffff The above printout is missing register dump completely. The problem here is that the output comes from syslog which doesn't show KERN_INFO log-level messages. We didn't see this before because both of us were testing on 32-bit kernels which use the _default_ log-level. Fix that up by explicitly using KERN_DEFAULT log-level for __show_regs() printks. Signed-off-by: Pekka Enberg Cc: Vegard Nossum Cc: Andrew Morton Cc: Arjan van de Ven Cc: Linus Torvalds LKML-Reference: <1261988819.4641.2.camel@penberg-laptop> Signed-off-by: Ingo Molnar --- arch/x86/kernel/process.c | 4 ++-- arch/x86/kernel/process_32.c | 14 +++++++------- arch/x86/kernel/process_64.c | 24 ++++++++++++------------ 3 files changed, 21 insertions(+), 21 deletions(-) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 98c2cdeb599e..c6ee241c8a98 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -103,8 +103,8 @@ void show_regs_common(void) if (!product) product = ""; - printk("\n"); - printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n", + printk(KERN_CONT "\n"); + printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n", current->pid, current->comm, print_tainted(), init_utsname()->release, (int)strcspn(init_utsname()->version, " "), diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 9c517b5858f0..37ad1e046aae 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -139,16 +139,16 @@ void __show_regs(struct pt_regs *regs, int all) show_regs_common(); - printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n", + printk(KERN_DEFAULT "EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n", (u16)regs->cs, regs->ip, regs->flags, smp_processor_id()); print_symbol("EIP is at %s\n", regs->ip); - printk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n", + printk(KERN_DEFAULT "EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n", regs->ax, regs->bx, regs->cx, regs->dx); - printk("ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n", + printk(KERN_DEFAULT "ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n", regs->si, regs->di, regs->bp, sp); - printk(" DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n", + printk(KERN_DEFAULT " DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n", (u16)regs->ds, (u16)regs->es, (u16)regs->fs, gs, ss); if (!all) @@ -158,19 +158,19 @@ void __show_regs(struct pt_regs *regs, int all) cr2 = read_cr2(); cr3 = read_cr3(); cr4 = read_cr4_safe(); - printk("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", + printk(KERN_DEFAULT "CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", cr0, cr2, cr3, cr4); get_debugreg(d0, 0); get_debugreg(d1, 1); get_debugreg(d2, 2); get_debugreg(d3, 3); - printk("DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n", + printk(KERN_DEFAULT "DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n", d0, d1, d2, d3); get_debugreg(d6, 6); get_debugreg(d7, 7); - printk("DR6: %08lx DR7: %08lx\n", + printk(KERN_DEFAULT "DR6: %08lx DR7: %08lx\n", d6, d7); } diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 52fbd0c60198..f9e033150cdf 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -161,19 +161,19 @@ void __show_regs(struct pt_regs *regs, int all) unsigned int ds, cs, es; show_regs_common(); - printk(KERN_INFO "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip); + printk(KERN_DEFAULT "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip); printk_address(regs->ip, 1); - printk(KERN_INFO "RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, + printk(KERN_DEFAULT "RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, regs->sp, regs->flags); - printk(KERN_INFO "RAX: %016lx RBX: %016lx RCX: %016lx\n", + printk(KERN_DEFAULT "RAX: %016lx RBX: %016lx RCX: %016lx\n", regs->ax, regs->bx, regs->cx); - printk(KERN_INFO "RDX: %016lx RSI: %016lx RDI: %016lx\n", + printk(KERN_DEFAULT "RDX: %016lx RSI: %016lx RDI: %016lx\n", regs->dx, regs->si, regs->di); - printk(KERN_INFO "RBP: %016lx R08: %016lx R09: %016lx\n", + printk(KERN_DEFAULT "RBP: %016lx R08: %016lx R09: %016lx\n", regs->bp, regs->r8, regs->r9); - printk(KERN_INFO "R10: %016lx R11: %016lx R12: %016lx\n", + printk(KERN_DEFAULT "R10: %016lx R11: %016lx R12: %016lx\n", regs->r10, regs->r11, regs->r12); - printk(KERN_INFO "R13: %016lx R14: %016lx R15: %016lx\n", + printk(KERN_DEFAULT "R13: %016lx R14: %016lx R15: %016lx\n", regs->r13, regs->r14, regs->r15); asm("movl %%ds,%0" : "=r" (ds)); @@ -194,21 +194,21 @@ void __show_regs(struct pt_regs *regs, int all) cr3 = read_cr3(); cr4 = read_cr4(); - printk(KERN_INFO "FS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n", + printk(KERN_DEFAULT "FS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n", fs, fsindex, gs, gsindex, shadowgs); - printk(KERN_INFO "CS: %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds, + printk(KERN_DEFAULT "CS: %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds, es, cr0); - printk(KERN_INFO "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, + printk(KERN_DEFAULT "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, cr4); get_debugreg(d0, 0); get_debugreg(d1, 1); get_debugreg(d2, 2); - printk(KERN_INFO "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2); + printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2); get_debugreg(d3, 3); get_debugreg(d6, 6); get_debugreg(d7, 7); - printk(KERN_INFO "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7); + printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7); } void show_regs(struct pt_regs *regs) From c2ef6661ce62e26a8c0978e521fab646128a144b Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 21 Dec 2009 13:02:24 +0100 Subject: [PATCH 0173/1626] kprobes: Fix distinct type warning Every time I see this: kernel/kprobes.c: In function 'register_kretprobe': kernel/kprobes.c:1038: warning: comparison of distinct pointer types lacks a cast I'm wondering if something changed in common code and we need to do something for s390. Apparently that's not the case. Let's get rid of this annoying warning. Signed-off-by: Heiko Carstens Acked-by: Ananth N Mavinakayanahalli Cc: Masami Hiramatsu LKML-Reference: <20091221120224.GA4471@osiris.boeblingen.de.ibm.com> Signed-off-by: Ingo Molnar --- kernel/kprobes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/kprobes.c b/kernel/kprobes.c index e5342a344c43..b7df302a0204 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -1035,7 +1035,7 @@ int __kprobes register_kretprobe(struct kretprobe *rp) /* Pre-allocate memory for max kretprobe instances */ if (rp->maxactive <= 0) { #ifdef CONFIG_PREEMPT - rp->maxactive = max(10, 2 * num_possible_cpus()); + rp->maxactive = max_t(unsigned int, 10, 2*num_possible_cpus()); #else rp->maxactive = num_possible_cpus(); #endif From c0ca9da442df82b67095f230f24762042f9f3b7d Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Mon, 28 Dec 2009 11:02:15 +0200 Subject: [PATCH 0174/1626] x86, kmemcheck: Use KERN_WARNING for error reporting As suggested by Vegard Nossum, use KERN_WARNING for error reporting to make sure kmemcheck reports end up in syslog. Suggested-by: Vegard Nossum Signed-off-by: Pekka Enberg Cc: Andrew Morton LKML-Reference: <1261990935.4641.7.camel@penberg-laptop> Signed-off-by: Ingo Molnar --- arch/x86/mm/kmemcheck/error.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/arch/x86/mm/kmemcheck/error.c b/arch/x86/mm/kmemcheck/error.c index 4901d0dafda6..af3b6c8a436f 100644 --- a/arch/x86/mm/kmemcheck/error.c +++ b/arch/x86/mm/kmemcheck/error.c @@ -106,26 +106,25 @@ void kmemcheck_error_recall(void) switch (e->type) { case KMEMCHECK_ERROR_INVALID_ACCESS: - printk(KERN_ERR "WARNING: kmemcheck: Caught %d-bit read " - "from %s memory (%p)\n", + printk(KERN_WARNING "WARNING: kmemcheck: Caught %d-bit read from %s memory (%p)\n", 8 * e->size, e->state < ARRAY_SIZE(desc) ? desc[e->state] : "(invalid shadow state)", (void *) e->address); - printk(KERN_INFO); + printk(KERN_WARNING); for (i = 0; i < SHADOW_COPY_SIZE; ++i) - printk("%02x", e->memory_copy[i]); - printk("\n"); + printk(KERN_CONT "%02x", e->memory_copy[i]); + printk(KERN_CONT "\n"); - printk(KERN_INFO); + printk(KERN_WARNING); for (i = 0; i < SHADOW_COPY_SIZE; ++i) { if (e->shadow_copy[i] < ARRAY_SIZE(short_desc)) - printk(" %c", short_desc[e->shadow_copy[i]]); + printk(KERN_CONT " %c", short_desc[e->shadow_copy[i]]); else - printk(" ?"); + printk(KERN_CONT " ?"); } - printk("\n"); - printk(KERN_INFO "%*c\n", 2 + 2 + printk(KERN_CONT "\n"); + printk(KERN_WARNING "%*c\n", 2 + 2 * (int) (e->address & (SHADOW_COPY_SIZE - 1)), '^'); break; case KMEMCHECK_ERROR_BUG: From 4efb5290ae187514bd31af8c2d7755e175245e19 Mon Sep 17 00:00:00 2001 From: Wenji Huang Date: Mon, 21 Dec 2009 17:52:55 +0800 Subject: [PATCH 0175/1626] perf kmem: Fix statistics typo Replace bytes_req with bytes_alloc. Signed-off-by: Wenji Huang Reviewed-by: Li Zefan Cc: acme@redhat.com LKML-Reference: <1261389175-2227-1-git-send-email-wenji.huang@oracle.com> Signed-off-by: Ingo Molnar --- tools/perf/builtin-kmem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c index fc21ad79dd83..7ceb7416c316 100644 --- a/tools/perf/builtin-kmem.c +++ b/tools/perf/builtin-kmem.c @@ -137,7 +137,7 @@ static void insert_alloc_stat(unsigned long call_site, unsigned long ptr, if (data && data->ptr == ptr) { data->hit++; data->bytes_req += bytes_req; - data->bytes_alloc += bytes_req; + data->bytes_alloc += bytes_alloc; } else { data = malloc(sizeof(*data)); if (!data) @@ -177,7 +177,7 @@ static void insert_caller_stat(unsigned long call_site, if (data && data->call_site == call_site) { data->hit++; data->bytes_req += bytes_req; - data->bytes_alloc += bytes_req; + data->bytes_alloc += bytes_alloc; } else { data = malloc(sizeof(*data)); if (!data) From 40892367bc893f3abf6f5ca8ac2ed1c98ba26a77 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 21 Dec 2009 12:01:17 -0800 Subject: [PATCH 0176/1626] tracing: Kconfig spelling fixes and cleanups Fix filename reference (ftrace-implementation.txt -> ftrace-design.txt). Fix spelling, punctuation, grammar. Fix help text indentation and line lengths to reduce need for horizontal scrolling or larger window sizes. Signed-off-by: Randy Dunlap Cc: Steven Rostedt Cc: Frederic Weisbecker LKML-Reference: <20091221120117.3fb49cdc.randy.dunlap@oracle.com> Signed-off-by: Ingo Molnar --- kernel/trace/Kconfig | 112 +++++++++++++++++++++---------------------- 1 file changed, 56 insertions(+), 56 deletions(-) diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index d006554888dc..6c22d8a2f289 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -12,17 +12,17 @@ config NOP_TRACER config HAVE_FTRACE_NMI_ENTER bool help - See Documentation/trace/ftrace-implementation.txt + See Documentation/trace/ftrace-design.txt config HAVE_FUNCTION_TRACER bool help - See Documentation/trace/ftrace-implementation.txt + See Documentation/trace/ftrace-design.txt config HAVE_FUNCTION_GRAPH_TRACER bool help - See Documentation/trace/ftrace-implementation.txt + See Documentation/trace/ftrace-design.txt config HAVE_FUNCTION_GRAPH_FP_TEST bool @@ -34,17 +34,17 @@ config HAVE_FUNCTION_GRAPH_FP_TEST config HAVE_FUNCTION_TRACE_MCOUNT_TEST bool help - See Documentation/trace/ftrace-implementation.txt + See Documentation/trace/ftrace-design.txt config HAVE_DYNAMIC_FTRACE bool help - See Documentation/trace/ftrace-implementation.txt + See Documentation/trace/ftrace-design.txt config HAVE_FTRACE_MCOUNT_RECORD bool help - See Documentation/trace/ftrace-implementation.txt + See Documentation/trace/ftrace-design.txt config HAVE_HW_BRANCH_TRACER bool @@ -52,7 +52,7 @@ config HAVE_HW_BRANCH_TRACER config HAVE_SYSCALL_TRACEPOINTS bool help - See Documentation/trace/ftrace-implementation.txt + See Documentation/trace/ftrace-design.txt config TRACER_MAX_TRACE bool @@ -83,7 +83,7 @@ config RING_BUFFER_ALLOW_SWAP # This allows those options to appear when no other tracer is selected. But the # options do not appear when something else selects it. We need the two options # GENERIC_TRACER and TRACING to avoid circular dependencies to accomplish the -# hidding of the automatic options. +# hiding of the automatic options. config TRACING bool @@ -119,7 +119,7 @@ menuconfig FTRACE bool "Tracers" default y if DEBUG_KERNEL help - Enable the kernel tracing infrastructure. + Enable the kernel tracing infrastructure. if FTRACE @@ -133,7 +133,7 @@ config FUNCTION_TRACER help Enable the kernel to trace every kernel function. This is done by using a compiler feature to insert a small, 5-byte No-Operation - instruction to the beginning of every kernel function, which NOP + instruction at the beginning of every kernel function, which NOP sequence is then dynamically patched into a tracer call when tracing is enabled by the administrator. If it's runtime disabled (the bootup default), then the overhead of the instructions is very @@ -150,7 +150,7 @@ config FUNCTION_GRAPH_TRACER and its entry. Its first purpose is to trace the duration of functions and draw a call graph for each thread with some information like - the return value. This is done by setting the current return + the return value. This is done by setting the current return address on the current task structure into a stack of calls. @@ -173,7 +173,7 @@ config IRQSOFF_TRACER echo 0 > /sys/kernel/debug/tracing/tracing_max_latency - (Note that kernel size and overhead increases with this option + (Note that kernel size and overhead increase with this option enabled. This option and the preempt-off timing option can be used together or separately.) @@ -186,7 +186,7 @@ config PREEMPT_TRACER select TRACER_MAX_TRACE select RING_BUFFER_ALLOW_SWAP help - This option measures the time spent in preemption off critical + This option measures the time spent in preemption-off critical sections, with microsecond accuracy. The default measurement method is a maximum search, which is @@ -195,7 +195,7 @@ config PREEMPT_TRACER echo 0 > /sys/kernel/debug/tracing/tracing_max_latency - (Note that kernel size and overhead increases with this option + (Note that kernel size and overhead increase with this option enabled. This option and the irqs-off timing option can be used together or separately.) @@ -222,7 +222,7 @@ config ENABLE_DEFAULT_TRACERS depends on !GENERIC_TRACER select TRACING help - This tracer hooks to various trace points in the kernel + This tracer hooks to various trace points in the kernel, allowing the user to pick and choose which trace point they want to trace. It also includes the sched_switch tracer plugin. @@ -265,19 +265,19 @@ choice The likely/unlikely profiler only looks at the conditions that are annotated with a likely or unlikely macro. - The "all branch" profiler will profile every if statement in the + The "all branch" profiler will profile every if-statement in the kernel. This profiler will also enable the likely/unlikely - profiler as well. + profiler. - Either of the above profilers add a bit of overhead to the system. - If unsure choose "No branch profiling". + Either of the above profilers adds a bit of overhead to the system. + If unsure, choose "No branch profiling". config BRANCH_PROFILE_NONE bool "No branch profiling" help - No branch profiling. Branch profiling adds a bit of overhead. - Only enable it if you want to analyse the branching behavior. - Otherwise keep it disabled. + No branch profiling. Branch profiling adds a bit of overhead. + Only enable it if you want to analyse the branching behavior. + Otherwise keep it disabled. config PROFILE_ANNOTATED_BRANCHES bool "Trace likely/unlikely profiler" @@ -288,7 +288,7 @@ config PROFILE_ANNOTATED_BRANCHES /sys/kernel/debug/tracing/profile_annotated_branch - Note: this will add a significant overhead, only turn this + Note: this will add a significant overhead; only turn this on if you need to profile the system's use of these macros. config PROFILE_ALL_BRANCHES @@ -305,7 +305,7 @@ config PROFILE_ALL_BRANCHES This configuration, when enabled, will impose a great overhead on the system. This should only be enabled when the system - is to be analyzed + is to be analyzed in much detail. endchoice config TRACING_BRANCHES @@ -335,7 +335,7 @@ config POWER_TRACER depends on X86 select GENERIC_TRACER help - This tracer helps developers to analyze and optimize the kernels + This tracer helps developers to analyze and optimize the kernel's power management decisions, specifically the C-state and P-state behavior. @@ -391,14 +391,14 @@ config HW_BRANCH_TRACER select GENERIC_TRACER help This tracer records all branches on the system in a circular - buffer giving access to the last N branches for each cpu. + buffer, giving access to the last N branches for each cpu. config KMEMTRACE bool "Trace SLAB allocations" select GENERIC_TRACER help kmemtrace provides tracing for slab allocator functions, such as - kmalloc, kfree, kmem_cache_alloc, kmem_cache_free etc.. Collected + kmalloc, kfree, kmem_cache_alloc, kmem_cache_free, etc. Collected data is then fed to the userspace application in order to analyse allocation hotspots, internal fragmentation and so on, making it possible to see how well an allocator performs, as well as debug @@ -417,15 +417,15 @@ config WORKQUEUE_TRACER bool "Trace workqueues" select GENERIC_TRACER help - The workqueue tracer provides some statistical informations + The workqueue tracer provides some statistical information about each cpu workqueue thread such as the number of the works inserted and executed since their creation. It can help - to evaluate the amount of work each of them have to perform. + to evaluate the amount of work each of them has to perform. For example it can help a developer to decide whether he should - choose a per cpu workqueue instead of a singlethreaded one. + choose a per-cpu workqueue instead of a singlethreaded one. config BLK_DEV_IO_TRACE - bool "Support for tracing block io actions" + bool "Support for tracing block IO actions" depends on SYSFS depends on BLOCK select RELAY @@ -456,15 +456,15 @@ config KPROBE_EVENT select TRACING default y help - This allows the user to add tracing events (similar to tracepoints) on the fly - via the ftrace interface. See Documentation/trace/kprobetrace.txt - for more details. + This allows the user to add tracing events (similar to tracepoints) + on the fly via the ftrace interface. See + Documentation/trace/kprobetrace.txt for more details. Those events can be inserted wherever kprobes can probe, and record various register and memory values. - This option is also required by perf-probe subcommand of perf tools. If - you want to use perf tools, this option is strongly recommended. + This option is also required by perf-probe subcommand of perf tools. + If you want to use perf tools, this option is strongly recommended. config DYNAMIC_FTRACE bool "enable/disable ftrace tracepoints dynamically" @@ -472,32 +472,32 @@ config DYNAMIC_FTRACE depends on HAVE_DYNAMIC_FTRACE default y help - This option will modify all the calls to ftrace dynamically - (will patch them out of the binary image and replaces them - with a No-Op instruction) as they are called. A table is - created to dynamically enable them again. + This option will modify all the calls to ftrace dynamically + (will patch them out of the binary image and replace them + with a No-Op instruction) as they are called. A table is + created to dynamically enable them again. - This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but otherwise - has native performance as long as no tracing is active. + This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but + otherwise has native performance as long as no tracing is active. - The changes to the code are done by a kernel thread that - wakes up once a second and checks to see if any ftrace calls - were made. If so, it runs stop_machine (stops all CPUS) - and modifies the code to jump over the call to ftrace. + The changes to the code are done by a kernel thread that + wakes up once a second and checks to see if any ftrace calls + were made. If so, it runs stop_machine (stops all CPUS) + and modifies the code to jump over the call to ftrace. config FUNCTION_PROFILER bool "Kernel function profiler" depends on FUNCTION_TRACER default n help - This option enables the kernel function profiler. A file is created - in debugfs called function_profile_enabled which defaults to zero. - When a 1 is echoed into this file profiling begins, and when a - zero is entered, profiling stops. A file in the trace_stats - directory called functions, that show the list of functions that - have been hit and their counters. + This option enables the kernel function profiler. A file is created + in debugfs called function_profile_enabled which defaults to zero. + When a 1 is echoed into this file profiling begins, and when a + zero is entered, profiling stops. A "functions" file is created in + the trace_stats directory; this file shows the list of functions that + have been hit and their counters. - If in doubt, say N + If in doubt, say N. config FTRACE_MCOUNT_RECORD def_bool y @@ -556,8 +556,8 @@ config RING_BUFFER_BENCHMARK tristate "Ring buffer benchmark stress tester" depends on RING_BUFFER help - This option creates a test to stress the ring buffer and bench mark it. - It creates its own ring buffer such that it will not interfer with + This option creates a test to stress the ring buffer and benchmark it. + It creates its own ring buffer such that it will not interfere with any other users of the ring buffer (such as ftrace). It then creates a producer and consumer that will run for 10 seconds and sleep for 10 seconds. Each interval it will print out the number of events @@ -566,7 +566,7 @@ config RING_BUFFER_BENCHMARK It does not disable interrupts or raise its priority, so it may be affected by processes that are running. - If unsure, say N + If unsure, say N. endif # FTRACE From dfb12eeb0f04b37e5eb3858864d074af4ecd2ac7 Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Sun, 27 Dec 2009 15:48:40 -0500 Subject: [PATCH 0177/1626] ALSA: atiixp: Specify codec for Foxconn RC4107MA-RS2 BugLink: https://bugs.launchpad.net/ubuntu/+bug/498863 This mainboard needs ac97_codec=0. Cc: stable@kernel.org Tested-by: Apoorv Parle Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai --- sound/pci/atiixp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c index d6752dff2a44..42b4fbbd8e2b 100644 --- a/sound/pci/atiixp.c +++ b/sound/pci/atiixp.c @@ -297,6 +297,7 @@ static struct pci_device_id snd_atiixp_ids[] = { MODULE_DEVICE_TABLE(pci, snd_atiixp_ids); static struct snd_pci_quirk atiixp_quirks[] __devinitdata = { + SND_PCI_QUIRK(0x105b, 0x0c81, "Foxconn RC4107MA-RS2", 0), SND_PCI_QUIRK(0x15bd, 0x3100, "DFI RS482", 0), { } /* terminator */ }; From 9980c6209ebc2a02eb3ca51a4fae1e17f645c868 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 27 Dec 2009 22:26:47 +0100 Subject: [PATCH 0178/1626] ALSA: test off by one in setsamplerate() With `while (i++ < MAX_WRITE_RETRY)' i reaches MAX_WRITE_RETRY + 1 after the loop Signed-off-by: Roel Kluin Signed-off-by: Takashi Iwai --- sound/pci/riptide/riptide.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c index b5ca02e2038c..e66ef2b69b5d 100644 --- a/sound/pci/riptide/riptide.c +++ b/sound/pci/riptide/riptide.c @@ -1058,7 +1058,7 @@ setsamplerate(struct cmdif *cif, unsigned char *intdec, unsigned int rate) rptr.retwords[2] != M && rptr.retwords[3] != N && i++ < MAX_WRITE_RETRY); - if (i == MAX_WRITE_RETRY) { + if (i > MAX_WRITE_RETRY) { snd_printdd("sent samplerate %d: %d failed\n", *intdec, rate); return -EIO; From 78b8d5d2ee280c463908fd75f3bdf246bcb6ac8d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 28 Dec 2009 12:24:22 +0100 Subject: [PATCH 0179/1626] ALSA: usb-audio - Avoid Oops after disconnect As the release of substreams may be done asynchronously from the disconnection, close callback needs to check the shutdown flag before actually accessing the usb interface. Reference: Novell bnc#505027 http://bugzilla.novell.com/show_bug.cgi?id=565027 Signed-off-by: Takashi Iwai --- sound/usb/usbaudio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 4963defee18a..9edef4684978 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -1936,7 +1936,7 @@ static int snd_usb_pcm_close(struct snd_pcm_substream *substream, int direction) struct snd_usb_stream *as = snd_pcm_substream_chip(substream); struct snd_usb_substream *subs = &as->substream[direction]; - if (subs->interface >= 0) { + if (!as->chip->shutdown && subs->interface >= 0) { usb_set_interface(subs->dev, subs->interface, 0); subs->interface = -1; } From 2f7a2d89a8b5915d89ad9ebeb0065db7d5831cea Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 28 Dec 2009 13:18:44 +0100 Subject: [PATCH 0180/1626] cfq-iosched: don't regard requests with long distance as close seek_mean could be very big sometimes, using it as close criteria is meaningless as this doen't improve any performance. So if it's big, let's fallback to default value. Reviewed-by: Corrado Zoccolo Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 8df4fe58f4e7..918c7fd9aeb1 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1667,13 +1667,17 @@ static inline sector_t cfq_dist_from_last(struct cfq_data *cfqd, #define CFQQ_SEEKY(cfqq) ((cfqq)->seek_mean > CFQQ_SEEK_THR) static inline int cfq_rq_close(struct cfq_data *cfqd, struct cfq_queue *cfqq, - struct request *rq) + struct request *rq, bool for_preempt) { sector_t sdist = cfqq->seek_mean; if (!sample_valid(cfqq->seek_samples)) sdist = CFQQ_SEEK_THR; + /* if seek_mean is big, using it as close criteria is meaningless */ + if (sdist > CFQQ_SEEK_THR && !for_preempt) + sdist = CFQQ_SEEK_THR; + return cfq_dist_from_last(cfqd, rq) <= sdist; } @@ -1701,7 +1705,7 @@ static struct cfq_queue *cfqq_close(struct cfq_data *cfqd, * will contain the closest sector. */ __cfqq = rb_entry(parent, struct cfq_queue, p_node); - if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq)) + if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq, false)) return __cfqq; if (blk_rq_pos(__cfqq->next_rq) < sector) @@ -1712,7 +1716,7 @@ static struct cfq_queue *cfqq_close(struct cfq_data *cfqd, return NULL; __cfqq = rb_entry(node, struct cfq_queue, p_node); - if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq)) + if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq, false)) return __cfqq; return NULL; @@ -3112,7 +3116,7 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, * if this request is as-good as one we would expect from the * current cfqq, let it preempt */ - if (cfq_rq_close(cfqd, cfqq, rq)) + if (cfq_rq_close(cfqd, cfqq, rq, true)) return true; return false; From 00afa758067ac1c947149ef766adcdfe30c44d7d Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Sun, 27 Dec 2009 14:33:14 +0200 Subject: [PATCH 0181/1626] SLAB: Fix lockdep annotation breakage Commit ce79ddc8e2376a9a93c7d42daf89bfcbb9187e62 ("SLAB: Fix lockdep annotations for CPU hotplug") broke init_node_lock_keys() off-slab logic which causes lockdep false positives. Fix that up by reverting the logic back to original while keeping CPU hotplug fixes intact. Reported-and-tested-by: Heiko Carstens Reported-and-tested-by: Andi Kleen Signed-off-by: Pekka Enberg --- mm/slab.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/slab.c b/mm/slab.c index 7d41f15b48d3..7451bdacaf18 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -654,7 +654,7 @@ static void init_node_lock_keys(int q) l3 = s->cs_cachep->nodelists[q]; if (!l3 || OFF_SLAB(s->cs_cachep)) - return; + continue; lockdep_set_class(&l3->list_lock, &on_slab_l3_key); alc = l3->alien; /* @@ -665,7 +665,7 @@ static void init_node_lock_keys(int q) * for alloc_alien_cache, */ if (!alc || (unsigned long)alc == BAD_ALIEN_MAGIC) - return; + continue; for_each_node(r) { if (alc[r]) lockdep_set_class(&alc[r]->lock, From 5b0691508aa99d309101a49b4b084dc16b3d7019 Mon Sep 17 00:00:00 2001 From: Andrey Borzenkov Date: Tue, 22 Dec 2009 21:38:44 +0300 Subject: [PATCH 0182/1626] orinoco: fix GFP_KERNEL in orinoco_set_key with interrupts disabled orinoco_set_key is called from two places both with interrupts disabled (under orinoco_lock). Use GFP_ATOMIC instead of GFP_KERNEL. Fixes following warning: [ 77.254109] WARNING: at /home/bor/src/linux-git/kernel/lockdep.c:2465 lockdep_trace_alloc+0x9a/0xa0() [ 77.254109] Hardware name: PORTEGE 4000 [ 77.254109] Modules linked in: af_packet irnet ppp_generic slhc ircomm_tty ircomm binfmt_misc dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath dm_mod loop nvram toshiba cryptomgr aead pcompress crypto_blkcipher michael_mic crypto_hash crypto_algapi orinoco_cs orinoco cfg80211 smsc_ircc2 pcmcia irda toshiba_acpi yenta_socket video i2c_ali1535 backlight rsrc_nonstatic ali_agp pcmcia_core psmouse output crc_ccitt i2c_core alim1535_wdt rfkill sg evdev ohci_hcd agpgart usbcore pata_ali libata reiserfs [last unloaded: scsi_wait_scan] [ 77.254109] Pid: 2296, comm: wpa_supplicant Not tainted 2.6.32-1avb #1 [ 77.254109] Call Trace: [ 77.254109] [] warn_slowpath_common+0x6d/0xa0 [ 77.254109] [] ? lockdep_trace_alloc+0x9a/0xa0 [ 77.254109] [] ? lockdep_trace_alloc+0x9a/0xa0 [ 77.254109] [] warn_slowpath_null+0x15/0x20 [ 77.254109] [] lockdep_trace_alloc+0x9a/0xa0 [ 77.254109] [] __kmalloc+0x36/0x130 [ 77.254109] [] ? orinoco_set_key+0x48/0x1c0 [orinoco] [ 77.254109] [] orinoco_set_key+0x48/0x1c0 [orinoco] [ 77.254109] [] orinoco_ioctl_set_encodeext+0x1dc/0x2d0 [orinoco] [ 77.254109] [] ioctl_standard_call+0x207/0x3b0 [ 77.254109] [] ? orinoco_ioctl_set_encodeext+0x0/0x2d0 [orinoco] [ 77.254109] [] ? rtnl_lock+0xf/0x20 [ 77.254109] [] ? rtnl_lock+0xf/0x20 [ 77.254109] [] ? __dev_get_by_name+0x85/0xb0 [ 77.254109] [] wext_handle_ioctl+0x176/0x200 [ 77.254109] [] ? orinoco_ioctl_set_encodeext+0x0/0x2d0 [orinoco] [ 77.254109] [] dev_ioctl+0x6af/0x730 [ 77.254109] [] ? move_addr_to_kernel+0x55/0x60 [ 77.254109] [] ? sys_sendto+0xe9/0x130 [ 77.254109] [] sock_ioctl+0x7e/0x250 [ 77.254109] [] ? sock_ioctl+0x0/0x250 [ 77.254109] [] vfs_ioctl+0x1c/0x70 [ 77.254109] [] do_vfs_ioctl+0x6a/0x590 [ 77.254109] [] ? might_fault+0x90/0xa0 [ 77.254109] [] ? might_fault+0x4a/0xa0 [ 77.254109] [] ? sys_socketcall+0x17e/0x280 [ 77.254109] [] sys_ioctl+0x39/0x60 [ 77.254109] [] sysenter_do_call+0x12/0x32 [ 77.254109] ---[ end trace 95ef563548d21efd ]--- Signed-off-by: Andrey Borzenkov Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/wext.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/orinoco/wext.c b/drivers/net/wireless/orinoco/wext.c index 7698fdd6a3a2..31ca241f7753 100644 --- a/drivers/net/wireless/orinoco/wext.c +++ b/drivers/net/wireless/orinoco/wext.c @@ -23,7 +23,7 @@ #define MAX_RID_LEN 1024 /* Helper routine to record keys - * Do not call from interrupt context */ + * It is called under orinoco_lock so it may not sleep */ static int orinoco_set_key(struct orinoco_private *priv, int index, enum orinoco_alg alg, const u8 *key, int key_len, const u8 *seq, int seq_len) @@ -32,14 +32,14 @@ static int orinoco_set_key(struct orinoco_private *priv, int index, kzfree(priv->keys[index].seq); if (key_len) { - priv->keys[index].key = kzalloc(key_len, GFP_KERNEL); + priv->keys[index].key = kzalloc(key_len, GFP_ATOMIC); if (!priv->keys[index].key) goto nomem; } else priv->keys[index].key = NULL; if (seq_len) { - priv->keys[index].seq = kzalloc(seq_len, GFP_KERNEL); + priv->keys[index].seq = kzalloc(seq_len, GFP_ATOMIC); if (!priv->keys[index].seq) goto free_key; } else From 659c8e5243caf14564155ad8421404f044dd8031 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 18 Dec 2009 11:36:49 +0100 Subject: [PATCH 0183/1626] libertas: Remove carrier signaling from the scan code There is no reason to signal a carrier off when doing a 802.11 scan. Cc: Holger Schurig Signed-off-by: Samuel Ortiz Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/scan.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index c6a6c042b82f..b0b1c7841500 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -567,11 +567,8 @@ int lbs_scan_networks(struct lbs_private *priv, int full_scan) chan_count = lbs_scan_create_channel_list(priv, chan_list); netif_stop_queue(priv->dev); - netif_carrier_off(priv->dev); - if (priv->mesh_dev) { + if (priv->mesh_dev) netif_stop_queue(priv->mesh_dev); - netif_carrier_off(priv->mesh_dev); - } /* Prepare to continue an interrupted scan */ lbs_deb_scan("chan_count %d, scan_channel %d\n", @@ -635,16 +632,13 @@ out2: priv->scan_channel = 0; out: - if (priv->connect_status == LBS_CONNECTED) { - netif_carrier_on(priv->dev); - if (!priv->tx_pending_len) - netif_wake_queue(priv->dev); - } - if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED)) { - netif_carrier_on(priv->mesh_dev); - if (!priv->tx_pending_len) - netif_wake_queue(priv->mesh_dev); - } + if (priv->connect_status == LBS_CONNECTED && !priv->tx_pending_len) + netif_wake_queue(priv->dev); + + if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED) && + !priv->tx_pending_len) + netif_wake_queue(priv->mesh_dev); + kfree(chan_list); lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); From 2e10d330f8d5f039fa1e00baf59435ab0f11c722 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Dec 2009 19:07:09 +0100 Subject: [PATCH 0184/1626] mac80211: fix ibss join with fixed-bssid When fixed bssid is requested when joining an ibss network, incoming beacons that match the configured bssid cause mac80211 to create new sta entries, even before the ibss interface is in joined state. When that happens, it fails to bring up the interface entirely, because it checks for existing sta entries before joining. This patch fixes this bug by refusing to create sta info entries before the interface is fully operational. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- net/mac80211/ibss.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 10d13856f86c..1f2db647bb5c 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -382,6 +382,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata, u8 *bssid,u8 *addr, u32 supp_rates) { + struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; struct ieee80211_local *local = sdata->local; struct sta_info *sta; int band = local->hw.conf.channel->band; @@ -397,6 +398,9 @@ struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata, return NULL; } + if (ifibss->state == IEEE80211_IBSS_MLME_SEARCH) + return NULL; + if (compare_ether_addr(bssid, sdata->u.ibss.bssid)) return NULL; From 242ab7ad689accafd5e87ffd22b85cf1bf7fbbef Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 21 Dec 2009 22:26:48 -0500 Subject: [PATCH 0185/1626] ath5k: fix SWI calibration interrupt storm The calibration period is now invoked by triggering a software interrupt from within the ISR by ath5k_hw_calibration_poll() instead of via a timer. However, the calibration interval isn't initialized before interrupts are enabled, so we can have a situation where an interrupt occurs before the interval is assigned, so the interval is actually negative. As a result, the ISR will arm a software interrupt to schedule the tasklet, and then rearm it when the SWI is processed, and so on, leading to a softlockup at modprobe time. Move the initialization order around so the calibration interval is set before interrupts are active. Another possible fix is to schedule the tasklet directly from the poll routine, but I think there are additional plans for the SWI. Signed-off-by: Bob Copeland Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index a4c086f069b1..2a446a938249 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2381,6 +2381,9 @@ ath5k_init(struct ath5k_softc *sc) */ ath5k_stop_locked(sc); + /* Set PHY calibration interval */ + ah->ah_cal_intval = ath5k_calinterval; + /* * The basic interface to setting the hardware in a good * state is ``reset''. On return the hardware is known to @@ -2408,10 +2411,6 @@ ath5k_init(struct ath5k_softc *sc) /* Set ack to be sent at low bit-rates */ ath5k_hw_set_ack_bitrate_high(ah, false); - - /* Set PHY calibration inteval */ - ah->ah_cal_intval = ath5k_calinterval; - ret = 0; done: mmiowb(); From 5e31258945f60dff65952575625cac214a75893e Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Wed, 23 Dec 2009 00:03:21 +0100 Subject: [PATCH 0186/1626] rt2x00: Add USB ID for Linksys WUSB 600N rev 2. This is a rt2870 based device. Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index af85d18cdbe7..ab95346cf6a3 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -922,6 +922,7 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1737, 0x0079), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Logitec */ { USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) }, From 671adc93b6472eaa0142a88d096c945f7b07893a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 23 Dec 2009 13:12:04 +0100 Subject: [PATCH 0187/1626] wireless: remove remaining qual code This removes the remaining users of the rx status 'qual' field and the field itself. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 11 -- drivers/net/wireless/iwlwifi/iwl-3945.c | 10 +- drivers/net/wireless/iwlwifi/iwl-3945.h | 1 - drivers/net/wireless/iwlwifi/iwl-rx.c | 48 +------ drivers/net/wireless/iwlwifi/iwl3945-base.c | 41 ------ drivers/net/wireless/libertas_tf/main.c | 1 - drivers/net/wireless/rtl818x/rtl8180_dev.c | 1 - drivers/net/wireless/zd1211rw/zd_chip.c | 140 -------------------- drivers/net/wireless/zd1211rw/zd_chip.h | 3 - drivers/net/wireless/zd1211rw/zd_mac.c | 3 - include/net/mac80211.h | 2 - 11 files changed, 4 insertions(+), 257 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 2a446a938249..e63b7c40d0ee 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1903,17 +1903,6 @@ accept: rxs->noise = sc->ah->ah_noise_floor; rxs->signal = rxs->noise + rs.rs_rssi; - /* An rssi of 35 indicates you should be able use - * 54 Mbps reliably. A more elaborate scheme can be used - * here but it requires a map of SNR/throughput for each - * possible mode used */ - rxs->qual = rs.rs_rssi * 100 / 35; - - /* rssi can be more than 35 though, anything above that - * should be considered at 100% */ - if (rxs->qual > 100) - rxs->qual = 100; - rxs->antenna = rs.rs_antenna; rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate); rxs->flag |= ath5k_rx_decrypted(sc, ds, skb, &rs); diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index e413bd35bc41..234891d8cc10 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -681,19 +681,13 @@ static void iwl3945_rx_reply_rx(struct iwl_priv *priv, snr = rx_stats_sig_avg / rx_stats_noise_diff; rx_status.noise = rx_status.signal - iwl3945_calc_db_from_ratio(snr); - rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, - rx_status.noise); - - /* If noise info not available, calculate signal quality indicator (%) - * using just the dBm signal level. */ } else { rx_status.noise = priv->last_rx_noise; - rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0); } - IWL_DEBUG_STATS(priv, "Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n", - rx_status.signal, rx_status.noise, rx_status.qual, + IWL_DEBUG_STATS(priv, "Rssi %d noise %d sig_avg %d noise_diff %d\n", + rx_status.signal, rx_status.noise, rx_stats_sig_avg, rx_stats_noise_diff); header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt); diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index ecc23ec1f6a4..531fa125f5a6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -222,7 +222,6 @@ struct iwl3945_ibss_seq { * *****************************************************************************/ extern int iwl3945_calc_db_from_ratio(int sig_ratio); -extern int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm); extern void iwl3945_rx_replenish(void *data); extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq); extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv, diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index f5c87e72660a..6f36b6e79f5e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -650,47 +650,6 @@ void iwl_reply_statistics(struct iwl_priv *priv, } EXPORT_SYMBOL(iwl_reply_statistics); -#define PERFECT_RSSI (-20) /* dBm */ -#define WORST_RSSI (-95) /* dBm */ -#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI) - -/* Calculate an indication of rx signal quality (a percentage, not dBm!). - * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info - * about formulas used below. */ -static int iwl_calc_sig_qual(int rssi_dbm, int noise_dbm) -{ - int sig_qual; - int degradation = PERFECT_RSSI - rssi_dbm; - - /* If we get a noise measurement, use signal-to-noise ratio (SNR) - * as indicator; formula is (signal dbm - noise dbm). - * SNR at or above 40 is a great signal (100%). - * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator. - * Weakest usable signal is usually 10 - 15 dB SNR. */ - if (noise_dbm) { - if (rssi_dbm - noise_dbm >= 40) - return 100; - else if (rssi_dbm < noise_dbm) - return 0; - sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2; - - /* Else use just the signal level. - * This formula is a least squares fit of data points collected and - * compared with a reference system that had a percentage (%) display - * for signal quality. */ - } else - sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation * - (15 * RSSI_RANGE + 62 * degradation)) / - (RSSI_RANGE * RSSI_RANGE); - - if (sig_qual > 100) - sig_qual = 100; - else if (sig_qual < 1) - sig_qual = 0; - - return sig_qual; -} - /* Calc max signal level (dBm) among 3 possible receivers */ static inline int iwl_calc_rssi(struct iwl_priv *priv, struct iwl_rx_phy_res *rx_resp) @@ -1101,11 +1060,8 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, if (iwl_is_associated(priv) && !test_bit(STATUS_SCANNING, &priv->status)) { rx_status.noise = priv->last_rx_noise; - rx_status.qual = iwl_calc_sig_qual(rx_status.signal, - rx_status.noise); } else { rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE; - rx_status.qual = iwl_calc_sig_qual(rx_status.signal, 0); } /* Reset beacon noise level if not associated. */ @@ -1118,8 +1074,8 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, iwl_dbg_report_frame(priv, phy_res, len, header, 1); #endif iwl_dbg_log_rx_data_frame(priv, len, header); - IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, qual %d, TSF %llu\n", - rx_status.signal, rx_status.noise, rx_status.qual, + IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, TSF %llu\n", + rx_status.signal, rx_status.noise, (unsigned long long)rx_status.mactime); /* diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index e5d8fa38432e..f8e4e4b18d02 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1299,47 +1299,6 @@ int iwl3945_calc_db_from_ratio(int sig_ratio) return (int)ratio2dB[sig_ratio]; } -#define PERFECT_RSSI (-20) /* dBm */ -#define WORST_RSSI (-95) /* dBm */ -#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI) - -/* Calculate an indication of rx signal quality (a percentage, not dBm!). - * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info - * about formulas used below. */ -int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm) -{ - int sig_qual; - int degradation = PERFECT_RSSI - rssi_dbm; - - /* If we get a noise measurement, use signal-to-noise ratio (SNR) - * as indicator; formula is (signal dbm - noise dbm). - * SNR at or above 40 is a great signal (100%). - * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator. - * Weakest usable signal is usually 10 - 15 dB SNR. */ - if (noise_dbm) { - if (rssi_dbm - noise_dbm >= 40) - return 100; - else if (rssi_dbm < noise_dbm) - return 0; - sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2; - - /* Else use just the signal level. - * This formula is a least squares fit of data points collected and - * compared with a reference system that had a percentage (%) display - * for signal quality. */ - } else - sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation * - (15 * RSSI_RANGE + 62 * degradation)) / - (RSSI_RANGE * RSSI_RANGE); - - if (sig_qual > 100) - sig_qual = 100; - else if (sig_qual < 1) - sig_qual = 0; - - return sig_qual; -} - /** * iwl3945_rx_handle - Main entry function for receiving responses from uCode * diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c index 019431d2f8a9..26a1abd5bb03 100644 --- a/drivers/net/wireless/libertas_tf/main.c +++ b/drivers/net/wireless/libertas_tf/main.c @@ -495,7 +495,6 @@ int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb) stats.band = IEEE80211_BAND_2GHZ; stats.signal = prxpd->snr; stats.noise = prxpd->nf; - stats.qual = prxpd->snr - prxpd->nf; /* Marvell rate index has a hole at value 4 */ if (prxpd->rx_rate > 4) --prxpd->rx_rate; diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c index a1a3dd15c664..8a40a1439984 100644 --- a/drivers/net/wireless/rtl818x/rtl8180_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c @@ -132,7 +132,6 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) rx_status.antenna = (flags2 >> 15) & 1; /* TODO: improve signal/rssi reporting */ - rx_status.qual = flags2 & 0xFF; rx_status.signal = (flags2 >> 8) & 0x7F; /* XXX: is this correct? */ rx_status.rate_idx = (flags >> 20) & 0xF; diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c index dfa1b9bc22c8..7ca95c414fa8 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.c +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -1325,151 +1325,11 @@ int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates) return r; } -static int ofdm_qual_db(u8 status_quality, u8 zd_rate, unsigned int size) -{ - static const u16 constants[] = { - 715, 655, 585, 540, 470, 410, 360, 315, - 270, 235, 205, 175, 150, 125, 105, 85, - 65, 50, 40, 25, 15 - }; - - int i; - u32 x; - - /* It seems that their quality parameter is somehow per signal - * and is now transferred per bit. - */ - switch (zd_rate) { - case ZD_OFDM_RATE_6M: - case ZD_OFDM_RATE_12M: - case ZD_OFDM_RATE_24M: - size *= 2; - break; - case ZD_OFDM_RATE_9M: - case ZD_OFDM_RATE_18M: - case ZD_OFDM_RATE_36M: - case ZD_OFDM_RATE_54M: - size *= 4; - size /= 3; - break; - case ZD_OFDM_RATE_48M: - size *= 3; - size /= 2; - break; - default: - return -EINVAL; - } - - x = (10000 * status_quality)/size; - for (i = 0; i < ARRAY_SIZE(constants); i++) { - if (x > constants[i]) - break; - } - - switch (zd_rate) { - case ZD_OFDM_RATE_6M: - case ZD_OFDM_RATE_9M: - i += 3; - break; - case ZD_OFDM_RATE_12M: - case ZD_OFDM_RATE_18M: - i += 5; - break; - case ZD_OFDM_RATE_24M: - case ZD_OFDM_RATE_36M: - i += 9; - break; - case ZD_OFDM_RATE_48M: - case ZD_OFDM_RATE_54M: - i += 15; - break; - default: - return -EINVAL; - } - - return i; -} - -static int ofdm_qual_percent(u8 status_quality, u8 zd_rate, unsigned int size) -{ - int r; - - r = ofdm_qual_db(status_quality, zd_rate, size); - ZD_ASSERT(r >= 0); - if (r < 0) - r = 0; - - r = (r * 100)/29; - return r <= 100 ? r : 100; -} - -static unsigned int log10times100(unsigned int x) -{ - static const u8 log10[] = { - 0, - 0, 30, 47, 60, 69, 77, 84, 90, 95, 100, - 104, 107, 111, 114, 117, 120, 123, 125, 127, 130, - 132, 134, 136, 138, 139, 141, 143, 144, 146, 147, - 149, 150, 151, 153, 154, 155, 156, 157, 159, 160, - 161, 162, 163, 164, 165, 166, 167, 168, 169, 169, - 170, 171, 172, 173, 174, 174, 175, 176, 177, 177, - 178, 179, 179, 180, 181, 181, 182, 183, 183, 184, - 185, 185, 186, 186, 187, 188, 188, 189, 189, 190, - 190, 191, 191, 192, 192, 193, 193, 194, 194, 195, - 195, 196, 196, 197, 197, 198, 198, 199, 199, 200, - 200, 200, 201, 201, 202, 202, 202, 203, 203, 204, - 204, 204, 205, 205, 206, 206, 206, 207, 207, 207, - 208, 208, 208, 209, 209, 210, 210, 210, 211, 211, - 211, 212, 212, 212, 213, 213, 213, 213, 214, 214, - 214, 215, 215, 215, 216, 216, 216, 217, 217, 217, - 217, 218, 218, 218, 219, 219, 219, 219, 220, 220, - 220, 220, 221, 221, 221, 222, 222, 222, 222, 223, - 223, 223, 223, 224, 224, 224, 224, - }; - - return x < ARRAY_SIZE(log10) ? log10[x] : 225; -} - -enum { - MAX_CCK_EVM_DB = 45, -}; - -static int cck_evm_db(u8 status_quality) -{ - return (20 * log10times100(status_quality)) / 100; -} - -static int cck_snr_db(u8 status_quality) -{ - int r = MAX_CCK_EVM_DB - cck_evm_db(status_quality); - ZD_ASSERT(r >= 0); - return r; -} - -static int cck_qual_percent(u8 status_quality) -{ - int r; - - r = cck_snr_db(status_quality); - r = (100*r)/17; - return r <= 100 ? r : 100; -} - static inline u8 zd_rate_from_ofdm_plcp_header(const void *rx_frame) { return ZD_OFDM | zd_ofdm_plcp_header_rate(rx_frame); } -u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size, - const struct rx_status *status) -{ - return (status->frame_status&ZD_RX_OFDM) ? - ofdm_qual_percent(status->signal_quality_ofdm, - zd_rate_from_ofdm_plcp_header(rx_frame), - size) : - cck_qual_percent(status->signal_quality_cck); -} - /** * zd_rx_rate - report zd-rate * @rx_frame - received frame diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h index 9fd8f3508d66..f8bbf7d302ae 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.h +++ b/drivers/net/wireless/zd1211rw/zd_chip.h @@ -929,9 +929,6 @@ static inline int zd_get_beacon_interval(struct zd_chip *chip, u32 *interval) struct rx_status; -u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size, - const struct rx_status *status); - u8 zd_rx_rate(const void *rx_frame, const struct rx_status *status); struct zd_mc_hash { diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 8a243732c519..cc648efb8ede 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -828,9 +828,6 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length) stats.freq = zd_channels[_zd_chip_get_channel(&mac->chip) - 1].center_freq; stats.band = IEEE80211_BAND_2GHZ; stats.signal = status->signal_strength; - stats.qual = zd_rx_qual_percent(buffer, - length - sizeof(struct rx_status), - status); rate = zd_rx_rate(buffer, status); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 538d6b761887..0bf369752274 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -547,7 +547,6 @@ enum mac80211_rx_flags { * unspecified depending on the hardware capabilities flags * @IEEE80211_HW_SIGNAL_* * @noise: noise when receiving this frame, in dBm. - * @qual: overall signal quality indication, in percent (0-100). * @antenna: antenna used * @rate_idx: index of data rate into band's supported rates or MCS index if * HT rates are use (RX_FLAG_HT) @@ -559,7 +558,6 @@ struct ieee80211_rx_status { int freq; int signal; int noise; - int __deprecated qual; int antenna; int rate_idx; int flag; From 3bdb2d48c5f58c781a4099c99044384a23620884 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 23 Dec 2009 13:12:05 +0100 Subject: [PATCH 0188/1626] cfg80211: fix race between deauth and assoc response Joseph Nahmias reported, in http://bugs.debian.org/562016, that he was getting the following warning (with some log around the issue): ath0: direct probe to AP 00:11:95:77:e0:b0 (try 1) ath0: direct probe responded ath0: authenticate with AP 00:11:95:77:e0:b0 (try 1) ath0: authenticated ath0: associate with AP 00:11:95:77:e0:b0 (try 1) ath0: deauthenticating from 00:11:95:77:e0:b0 by local choice (reason=3) ath0: direct probe to AP 00:11:95:77:e0:b0 (try 1) ath0: RX AssocResp from 00:11:95:77:e0:b0 (capab=0x421 status=0 aid=2) ath0: associated ------------[ cut here ]------------ WARNING: at net/wireless/mlme.c:97 cfg80211_send_rx_assoc+0x14d/0x152 [cfg80211]() Hardware name: 7658CTO ... Pid: 761, comm: phy0 Not tainted 2.6.32-trunk-686 #1 Call Trace: [] ? warn_slowpath_common+0x5e/0x8a [] ? warn_slowpath_null+0xa/0xc [] ? cfg80211_send_rx_assoc+0x14d/0x152 ... ath0: link becomes ready ath0: deauthenticating from 00:11:95:77:e0:b0 by local choice (reason=3) ath0: no IPv6 routers present ath0: link is not ready ath0: direct probe to AP 00:11:95:77:e0:b0 (try 1) ath0: direct probe responded ath0: authenticate with AP 00:11:95:77:e0:b0 (try 1) ath0: authenticated ath0: associate with AP 00:11:95:77:e0:b0 (try 1) ath0: RX ReassocResp from 00:11:95:77:e0:b0 (capab=0x421 status=0 aid=2) ath0: associated It is not clear to me how the first "direct probe" here happens, but this seems to be a race condition, if the user requests to deauth after requesting assoc, but before the assoc response is received. In that case, it may happen that mac80211 tries to report the assoc success to cfg80211, but gets blocked on the wdev lock that is held because the user is requesting the deauth. The result is that we run into a warning. This is mostly harmless, but maybe cause an unexpected event to be sent to userspace; we'd send an assoc success event although userspace was no longer expecting that. To fix this, remove the warning and check whether the race happened and in that case abort processing. Reported-by: Joseph Nahmias Cc: stable@kernel.org Cc: 562016-quiet@bugs.debian.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/mlme.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 1001db4912f7..82e6002c8d67 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -93,7 +93,18 @@ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len) } } - WARN_ON(!bss); + /* + * We might be coming here because the driver reported + * a successful association at the same time as the + * user requested a deauth. In that case, we will have + * removed the BSS from the auth_bsses list due to the + * deauth request when the assoc response makes it. If + * the two code paths acquire the lock the other way + * around, that's just the standard situation of a + * deauth being requested while connected. + */ + if (!bss) + goto out; } else if (wdev->conn) { cfg80211_sme_failed_assoc(wdev); /* From 83bd11a06da8bd119cc517de84b3214df3a7a6d4 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 23 Dec 2009 14:04:43 +0100 Subject: [PATCH 0189/1626] ath9k: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 5321f735e5a0..f7af5ea54753 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -96,7 +96,7 @@ static void ath_pci_bt_coex_prep(struct ath_common *common) pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm); } -const static struct ath_bus_ops ath_pci_bus_ops = { +static const struct ath_bus_ops ath_pci_bus_ops = { .read_cachesize = ath_pci_read_cachesize, .cleanup = ath_pci_cleanup, .eeprom_read = ath_pci_eeprom_read, From 79496738eb896d1658d9f3cca98e474c5f31eea3 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 23 Dec 2009 14:18:11 +0100 Subject: [PATCH 0190/1626] iwlwifi: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser Acked-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index fe511cbf012e..b93e49158196 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -150,7 +150,7 @@ static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = { }; /* mbps, mcs */ -const static struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = { +static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = { { "1", "BPSK DSSS"}, { "2", "QPSK DSSS"}, {"5.5", "BPSK CCK"}, From befabac2d8e4925b97c5eebc78ecc4b2079fd9dd Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 23 Dec 2009 15:23:19 +0200 Subject: [PATCH 0191/1626] wl1271_cmd.c: cleanup char => u8 This is just a clean up and doesn't make a functional difference. It keeps the lint checkers happy. Signed-off-by: Dan Carpenter Reviewed-by: Kalle Valo Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_cmd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c index 886a9bc39cc1..c3385b3d246c 100644 --- a/drivers/net/wireless/wl12xx/wl1271_cmd.c +++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c @@ -777,7 +777,7 @@ out: return ret; } -static int wl1271_build_basic_rates(char *rates, u8 band) +static int wl1271_build_basic_rates(u8 *rates, u8 band) { u8 index = 0; @@ -804,7 +804,7 @@ static int wl1271_build_basic_rates(char *rates, u8 band) return index; } -static int wl1271_build_extended_rates(char *rates, u8 band) +static int wl1271_build_extended_rates(u8 *rates, u8 band) { u8 index = 0; From 65486c8b30498dd274eea2c542696f22b63fe5b8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 23 Dec 2009 15:33:35 +0100 Subject: [PATCH 0192/1626] cfg80211: fix error path in cfg80211_wext_siwscan If there's an invalid channel or SSID, the code leaks the scan request. Always free the scan request, unless it was successfully given to the driver. Reported-by: Dan Carpenter Signed-off-by: Johannes Berg Acked-by: Dan Carpenter Signed-off-by: John W. Linville --- net/wireless/scan.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 12dfa62aad18..0c2cbbebca95 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -601,7 +601,7 @@ int cfg80211_wext_siwscan(struct net_device *dev, struct cfg80211_registered_device *rdev; struct wiphy *wiphy; struct iw_scan_req *wreq = NULL; - struct cfg80211_scan_request *creq; + struct cfg80211_scan_request *creq = NULL; int i, err, n_channels = 0; enum ieee80211_band band; @@ -694,8 +694,10 @@ int cfg80211_wext_siwscan(struct net_device *dev, /* translate "Scan for SSID" request */ if (wreq) { if (wrqu->data.flags & IW_SCAN_THIS_ESSID) { - if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) - return -EINVAL; + if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) { + err = -EINVAL; + goto out; + } memcpy(creq->ssids[0].ssid, wreq->essid, wreq->essid_len); creq->ssids[0].ssid_len = wreq->essid_len; } @@ -707,12 +709,15 @@ int cfg80211_wext_siwscan(struct net_device *dev, err = rdev->ops->scan(wiphy, dev, creq); if (err) { rdev->scan_req = NULL; - kfree(creq); + /* creq will be freed below */ } else { nl80211_send_scan_start(rdev, dev); + /* creq now owned by driver */ + creq = NULL; dev_hold(dev); } out: + kfree(creq); cfg80211_unlock_rdev(rdev); return err; } From 3867cf6a8c699846e928e8f5a9f31013708df192 Mon Sep 17 00:00:00 2001 From: Sujith Date: Wed, 23 Dec 2009 20:03:27 -0500 Subject: [PATCH 0193/1626] ath9k: fix suspend by waking device prior to stop Ensure the device is awake prior to trying to tell hardware to stop it. Impact of not doing this is we can likely leave the device in an undefined state likely causing issues with suspend and resume. This patch ensures harware is where it should be prior to suspend. Cc: stable@kernel.org Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 9e68c1a8aef0..2ec7451350f0 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2514,6 +2514,9 @@ static void ath9k_stop(struct ieee80211_hw *hw) return; /* another wiphy still in use */ } + /* Ensure HW is awake when we try to shut it down. */ + ath9k_ps_wakeup(sc); + if (ah->btcoex_hw.enabled) { ath9k_hw_btcoex_disable(ah); if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE) @@ -2534,6 +2537,9 @@ static void ath9k_stop(struct ieee80211_hw *hw) /* disable HAL and put h/w to sleep */ ath9k_hw_disable(ah); ath9k_hw_configpcipowersave(ah, 1, 1); + ath9k_ps_restore(sc); + + /* Finally, put the chip in FULL SLEEP mode */ ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP); sc->sc_flags |= SC_OP_INVALID; From 5f70a88f631c3480107853cae12925185eb4c598 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 23 Dec 2009 20:03:28 -0500 Subject: [PATCH 0194/1626] ath9k: wake hardware for interface IBSS/AP/Mesh removal When we remove a IBSS/AP/Mesh interface we stop DMA but to do this we should ensure hardware is on. Awaken the device prior to these calls. This should ensure DMA is stopped upon suspend and plain device removal. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 2ec7451350f0..623ade8960c5 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2653,8 +2653,10 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) || (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) || (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) { + ath9k_ps_wakeup(sc); ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); ath_beacon_return(sc, avp); + ath9k_ps_restore(sc); } sc->sc_flags &= ~SC_OP_BEACONS; From 8b685ba9de803f210936400612a32a2003f47cd3 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 23 Dec 2009 20:03:29 -0500 Subject: [PATCH 0195/1626] ath9k: wake hardware during AMPDU TX actions AMDPDU actions poke hardware for TX operation, as such we want to turn hardware on for these actions. AMDPU RX operations do not require hardware on as nothing is done in hardware for those actions. Without this we cannot guarantee hardware has been programmed correctly for each AMPDU TX action. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 623ade8960c5..996eb90263cc 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -3105,15 +3105,21 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, case IEEE80211_AMPDU_RX_STOP: break; case IEEE80211_AMPDU_TX_START: + ath9k_ps_wakeup(sc); ath_tx_aggr_start(sc, sta, tid, ssn); ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); + ath9k_ps_restore(sc); break; case IEEE80211_AMPDU_TX_STOP: + ath9k_ps_wakeup(sc); ath_tx_aggr_stop(sc, sta, tid); ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + ath9k_ps_restore(sc); break; case IEEE80211_AMPDU_TX_OPERATIONAL: + ath9k_ps_wakeup(sc); ath_tx_aggr_resume(sc, sta, tid); + ath9k_ps_restore(sc); break; default: ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL, From 5b479a076de091590423a9e6dfc2584126b28761 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 24 Dec 2009 14:04:32 +0100 Subject: [PATCH 0196/1626] ath9k: fix missed error codes in the tx status check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit My previous change added in: commit 815833e7ecf0b9a017315cae6aef4d7cd9517681 ath9k: fix tx status reporting was not checking all possible tx error conditions. This could possibly lead to throughput issues due to slow rate control adaption or missed retransmissions of failed A-MPDU frames. This patch adds a mask for all possible error conditions and uses it in the xmit ok check. Cc: stable@kernel.org Reported-by: Björn Smedman Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/mac.h | 3 +++ drivers/net/wireless/ath/ath9k/xmit.c | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h index 0c87771383f0..e185479e295e 100644 --- a/drivers/net/wireless/ath/ath9k/mac.h +++ b/drivers/net/wireless/ath/ath9k/mac.h @@ -77,6 +77,9 @@ #define ATH9K_TXERR_XTXOP 0x08 #define ATH9K_TXERR_TIMER_EXPIRED 0x10 #define ATH9K_TX_ACKED 0x20 +#define ATH9K_TXERR_MASK \ + (ATH9K_TXERR_XRETRY | ATH9K_TXERR_FILT | ATH9K_TXERR_FIFO | \ + ATH9K_TXERR_XTXOP | ATH9K_TXERR_TIMER_EXPIRED) #define ATH9K_TX_BA 0x01 #define ATH9K_TX_PWRMGMT 0x02 diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 1e813bbf474a..fa12b9060b0b 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -2072,7 +2072,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) &txq->axq_q, lastbf->list.prev); txq->axq_depth--; - txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_FILT); + txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_MASK); txq->axq_tx_inprogress = false; spin_unlock_bh(&txq->axq_lock); From b98c06b6debfe84c90200143bb1102f312f50a33 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 24 Dec 2009 15:26:09 -0500 Subject: [PATCH 0197/1626] mac80211: fix race with suspend and dynamic_ps_disable_work When mac80211 suspends it calls a driver's suspend callback as a last step and after that the driver assumes no calls will be made to it until we resume and its start callback is kicked. If such calls are made, however, suspend can end up throwing hardware in an unexpected state and making the device unusable upon resume. Fix this by preventing mac80211 to schedule dynamic_ps_disable_work by checking for when mac80211 starts to suspend and starts quiescing. Frames should be allowed to go through though as that is part of the quiescing steps and we do not flush the mac80211 workqueue since it was already done towards the beginning of suspend cycle. The other mac80211 issue will be hanled in the next patch. For further details see refer to the thread: http://marc.info/?t=126144866100001&r=1&w=2 Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/mac80211/tx.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 8834cc93c716..27ceaefd7bc8 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1419,6 +1419,10 @@ static bool need_dynamic_ps(struct ieee80211_local *local) if (!local->ps_sdata) return false; + /* No point if we're going to suspend */ + if (local->quiescing) + return false; + return true; } From 24feda0084722189468a65e20019cdd8ef99702b Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 24 Dec 2009 15:38:22 -0500 Subject: [PATCH 0198/1626] mac80211: fix propagation of failed hardware reconfigurations mac80211 does not propagate failed hardware reconfiguration requests. For suspend and resume this is important due to all the possible issues that can come out of the suspend <-> resume cycle. Not propagating the error means cfg80211 will assume the resume for the device went through fine and mac80211 will continue on trying to poke at the hardware, enable timers, queue work, and so on for a device which is completley unfunctional. The least we can do is to propagate device start issues and warn when this occurs upon resume. A side effect of this patch is we also now propagate the start errors upon harware reconfigurations (non-suspend), but this should also be desirable anyway, there is not point in continuing to reconfigure a device if mac80211 was unable to start the device. For further details refer to the thread: http://marc.info/?t=126151038700001&r=1&w=2 Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/mac80211/util.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 78a6e924c7e1..dc76267e436e 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1039,7 +1039,19 @@ int ieee80211_reconfig(struct ieee80211_local *local) /* restart hardware */ if (local->open_count) { + /* + * Upon resume hardware can sometimes be goofy due to + * various platform / driver / bus issues, so restarting + * the device may at times not work immediately. Propagate + * the error. + */ res = drv_start(local); + if (res) { + WARN(local->suspended, "Harware became unavailable " + "upon resume. This is could be a software issue" + "prior to suspend or a harware issue\n"); + return res; + } ieee80211_led_radio(local, true); } From e8a4a6df7397eb3b43ad3139d3fe9b41df70d6b0 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sat, 26 Dec 2009 20:31:59 +0100 Subject: [PATCH 0199/1626] wl1251: timeout one too soon in wl1251_boot_run_firmware() `loop' reaches INIT_LOOP + 1 after the loop. so if ACX_INTR_INIT_COMPLETE occurs in the last iteration the write occurs but also the error out as if a timeout occurred. This is probably very unlikely to ever occur. Signed-off-by: Roel Kluin Acked-by: Kalle Valo Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1251_boot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/wl12xx/wl1251_boot.c b/drivers/net/wireless/wl12xx/wl1251_boot.c index 2e733e7bdfd4..28a808674080 100644 --- a/drivers/net/wireless/wl12xx/wl1251_boot.c +++ b/drivers/net/wireless/wl12xx/wl1251_boot.c @@ -256,7 +256,7 @@ int wl1251_boot_run_firmware(struct wl1251 *wl) } } - if (loop >= INIT_LOOP) { + if (loop > INIT_LOOP) { wl1251_error("timeout waiting for the hardware to " "complete initialization"); return -EIO; From 6c853da3f30c93eae847ecbcd9fdf10ba0da04c2 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Mon, 28 Dec 2009 14:23:11 +0800 Subject: [PATCH 0200/1626] iwmc3200wifi: fix array out-of-boundary access Allocate priv->rx_packets[IWM_RX_ID_HASH + 1] because the max array index is IWM_RX_ID_HASH according to IWM_RX_ID_GET_HASH(). Cc: stable@kernel.org Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwmc3200wifi/iwm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwmc3200wifi/iwm.h b/drivers/net/wireless/iwmc3200wifi/iwm.h index 79ffa3b98d73..842811142bef 100644 --- a/drivers/net/wireless/iwmc3200wifi/iwm.h +++ b/drivers/net/wireless/iwmc3200wifi/iwm.h @@ -268,7 +268,7 @@ struct iwm_priv { struct sk_buff_head rx_list; struct list_head rx_tickets; - struct list_head rx_packets[IWM_RX_ID_HASH]; + struct list_head rx_packets[IWM_RX_ID_HASH + 1]; struct workqueue_struct *rx_wq; struct work_struct rx_worker; From 8152a74bc087ffd03e024eaaf5a853ecf62d376d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Dec 2009 11:09:30 +0900 Subject: [PATCH 0201/1626] sh: Only provide a PCLK definition for legacy CPG CPUs. As CPUs are migrated over to more fully-featured clock frameworks of their own and off of the legacy CPG code, they no longer have any real need for defining the PCLK value. The PCLK define in itself is already fairly misleading, as many boards get their input clocks from different sources, making this value fairly arbitrary anyways. Outside of the legacy CPG clock framework, the only place where this value is used is for deriving CLOCK_TICK_RATE, which we set back to the legacy PIT value that it was before the PCLK definitions were added in the first place. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 16 +++++++++------- arch/sh/include/asm/timex.h | 10 ++++++++++ 2 files changed, 19 insertions(+), 7 deletions(-) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 0031a6979f3a..2121fbb2ff4c 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -540,14 +540,16 @@ config SH_TIMER_MTU2 config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" - default "27000000" if CPU_SUBTYPE_SH7343 + depends on SH_CLK_CPG_LEGACY default "31250000" if CPU_SUBTYPE_SH7619 - default "32000000" if CPU_SUBTYPE_SH7722 - default "33333333" if CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7723 || \ - CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ - CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \ - CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG || \ - CPU_SUBTYPE_SH7786 || CPU_SUBTYPE_SH7724 + default "33333333" if CPU_SUBTYPE_SH7770 || \ + CPU_SUBTYPE_SH7760 || \ + CPU_SUBTYPE_SH7705 || \ + CPU_SUBTYPE_SH7203 || \ + CPU_SUBTYPE_SH7206 || \ + CPU_SUBTYPE_SH7263 || \ + CPU_SUBTYPE_MXG || \ + CPU_SUBTYPE_SH7786 default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "66000000" if CPU_SUBTYPE_SH4_202 default "50000000" diff --git a/arch/sh/include/asm/timex.h b/arch/sh/include/asm/timex.h index b556d49e5f2b..18bf06d9c764 100644 --- a/arch/sh/include/asm/timex.h +++ b/arch/sh/include/asm/timex.h @@ -6,7 +6,17 @@ #ifndef __ASM_SH_TIMEX_H #define __ASM_SH_TIMEX_H +/* + * Only parts using the legacy CPG code for their clock framework + * implementation need to define their own Pclk value. If provided, this + * can be used for accurately setting CLOCK_TICK_RATE, otherwise we + * simply fall back on the i8253 PIT value. + */ +#ifdef CONFIG_SH_PCLK_FREQ #define CLOCK_TICK_RATE (CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */ +#else +#define CLOCK_TICK_RATE 1193180 +#endif #include From 7788cd5557766d49343088b2edc544b186e2fe53 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Dec 2009 16:19:56 +0100 Subject: [PATCH 0202/1626] [ARM] Orion: fix PCIe inbound window programming when RAM size is not a power of two The PCIe inbound window size is supposed to be a power of two. If the total amount of RAM installed in the system is not a power of two, round it up such that it is. Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/plat-orion/pcie.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c index d41d41d78ad9..54c84a492a0f 100644 --- a/arch/arm/plat-orion/pcie.c +++ b/arch/arm/plat-orion/pcie.c @@ -132,6 +132,12 @@ static void __init orion_pcie_setup_wins(void __iomem *base, size += cs->size; } + /* + * Round up 'size' to the nearest power of two. + */ + if ((size & (size - 1)) != 0) + size = 1 << fls(size); + /* * Setup BAR[1] to all DRAM banks. */ From 39d30770992895d55789de64bad2349510af68d0 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Mon, 28 Dec 2009 13:28:25 -0800 Subject: [PATCH 0203/1626] x86: SGI UV: Fix writes to led registers on remote uv hubs The wrong address was being used to write the SCIR led regs on remote hubs. Also, there was an inconsistency between how BIOS and the kernel indexed these regs. Standardize on using the lower 6 bits of the APIC ID as the index. This patch fixes the problem of writing to an errant address to a cpu # >= 64. Signed-off-by: Mike Travis Reviewed-by: Jack Steiner Cc: Robin Holt Cc: Linus Torvalds Cc: stable@kernel.org LKML-Reference: <4B3922F9.3060905@sgi.com> [ v2: fix a number of annoying checkpatch artifacts and whitespace noise ] Signed-off-by: Ingo Molnar --- arch/x86/include/asm/uv/uv_hub.h | 86 +++++++++++++++++------------- arch/x86/kernel/apic/x2apic_uv_x.c | 12 ++--- 2 files changed, 54 insertions(+), 44 deletions(-) diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index 811bfabc80b7..bc54fa965af3 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -31,20 +31,20 @@ * contiguous (although various IO spaces may punch holes in * it).. * - * N - Number of bits in the node portion of a socket physical - * address. + * N - Number of bits in the node portion of a socket physical + * address. * - * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of - * routers always have low bit of 1, C/MBricks have low bit - * equal to 0. Most addressing macros that target UV hub chips - * right shift the NASID by 1 to exclude the always-zero bit. - * NASIDs contain up to 15 bits. + * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of + * routers always have low bit of 1, C/MBricks have low bit + * equal to 0. Most addressing macros that target UV hub chips + * right shift the NASID by 1 to exclude the always-zero bit. + * NASIDs contain up to 15 bits. * * GNODE - NASID right shifted by 1 bit. Most mmrs contain gnodes instead * of nasids. * - * PNODE - the low N bits of the GNODE. The PNODE is the most useful variant - * of the nasid for socket usage. + * PNODE - the low N bits of the GNODE. The PNODE is the most useful variant + * of the nasid for socket usage. * * * NumaLink Global Physical Address Format: @@ -71,12 +71,12 @@ * * * APICID format - * NOTE!!!!!! This is the current format of the APICID. However, code - * should assume that this will change in the future. Use functions - * in this file for all APICID bit manipulations and conversion. + * NOTE!!!!!! This is the current format of the APICID. However, code + * should assume that this will change in the future. Use functions + * in this file for all APICID bit manipulations and conversion. * - * 1111110000000000 - * 5432109876543210 + * 1111110000000000 + * 5432109876543210 * pppppppppplc0cch * sssssssssss * @@ -89,9 +89,9 @@ * Note: Processor only supports 12 bits in the APICID register. The ACPI * tables hold all 16 bits. Software needs to be aware of this. * - * Unless otherwise specified, all references to APICID refer to - * the FULL value contained in ACPI tables, not the subset in the - * processor APICID register. + * Unless otherwise specified, all references to APICID refer to + * the FULL value contained in ACPI tables, not the subset in the + * processor APICID register. */ @@ -151,16 +151,16 @@ struct uv_hub_info_s { }; DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); -#define uv_hub_info (&__get_cpu_var(__uv_hub_info)) +#define uv_hub_info (&__get_cpu_var(__uv_hub_info)) #define uv_cpu_hub_info(cpu) (&per_cpu(__uv_hub_info, cpu)) /* * Local & Global MMR space macros. - * Note: macros are intended to be used ONLY by inline functions - * in this file - not by other kernel code. - * n - NASID (full 15-bit global nasid) - * g - GNODE (full 15-bit global nasid, right shifted 1) - * p - PNODE (local part of nsids, right shifted 1) + * Note: macros are intended to be used ONLY by inline functions + * in this file - not by other kernel code. + * n - NASID (full 15-bit global nasid) + * g - GNODE (full 15-bit global nasid, right shifted 1) + * p - PNODE (local part of nsids, right shifted 1) */ #define UV_NASID_TO_PNODE(n) (((n) >> 1) & uv_hub_info->pnode_mask) #define UV_PNODE_TO_GNODE(p) ((p) |uv_hub_info->gnode_extra) @@ -215,8 +215,8 @@ DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); /* * Macros for converting between kernel virtual addresses, socket local physical * addresses, and UV global physical addresses. - * Note: use the standard __pa() & __va() macros for converting - * between socket virtual and socket physical addresses. + * Note: use the standard __pa() & __va() macros for converting + * between socket virtual and socket physical addresses. */ /* socket phys RAM --> UV global physical address */ @@ -287,21 +287,18 @@ static inline int uv_apicid_to_pnode(int apicid) * Access global MMRs using the low memory MMR32 space. This region supports * faster MMR access but not all MMRs are accessible in this space. */ -static inline unsigned long *uv_global_mmr32_address(int pnode, - unsigned long offset) +static inline unsigned long *uv_global_mmr32_address(int pnode, unsigned long offset) { return __va(UV_GLOBAL_MMR32_BASE | UV_GLOBAL_MMR32_PNODE_BITS(pnode) | offset); } -static inline void uv_write_global_mmr32(int pnode, unsigned long offset, - unsigned long val) +static inline void uv_write_global_mmr32(int pnode, unsigned long offset, unsigned long val) { writeq(val, uv_global_mmr32_address(pnode, offset)); } -static inline unsigned long uv_read_global_mmr32(int pnode, - unsigned long offset) +static inline unsigned long uv_read_global_mmr32(int pnode, unsigned long offset) { return readq(uv_global_mmr32_address(pnode, offset)); } @@ -310,21 +307,18 @@ static inline unsigned long uv_read_global_mmr32(int pnode, * Access Global MMR space using the MMR space located at the top of physical * memory. */ -static inline unsigned long *uv_global_mmr64_address(int pnode, - unsigned long offset) +static inline unsigned long *uv_global_mmr64_address(int pnode, unsigned long offset) { return __va(UV_GLOBAL_MMR64_BASE | UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset); } -static inline void uv_write_global_mmr64(int pnode, unsigned long offset, - unsigned long val) +static inline void uv_write_global_mmr64(int pnode, unsigned long offset, unsigned long val) { writeq(val, uv_global_mmr64_address(pnode, offset)); } -static inline unsigned long uv_read_global_mmr64(int pnode, - unsigned long offset) +static inline unsigned long uv_read_global_mmr64(int pnode, unsigned long offset) { return readq(uv_global_mmr64_address(pnode, offset)); } @@ -338,6 +332,16 @@ static inline unsigned long uv_global_gru_mmr_address(int pnode, unsigned long o return UV_GLOBAL_GRU_MMR_BASE | offset | (pnode << uv_hub_info->m_val); } +static inline void uv_write_global_mmr8(int pnode, unsigned long offset, unsigned char val) +{ + writeb(val, uv_global_mmr64_address(pnode, offset)); +} + +static inline unsigned char uv_read_global_mmr8(int pnode, unsigned long offset) +{ + return readb(uv_global_mmr64_address(pnode, offset)); +} + /* * Access hub local MMRs. Faster than using global space but only local MMRs * are accessible. @@ -457,11 +461,17 @@ static inline void uv_set_scir_bits(unsigned char value) } } +static inline unsigned long uv_scir_offset(int apicid) +{ + return SCIR_LOCAL_MMR_BASE | (apicid & 0x3f); +} + static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value) { if (uv_cpu_hub_info(cpu)->scir.state != value) { + uv_write_global_mmr8(uv_cpu_to_pnode(cpu), + uv_cpu_hub_info(cpu)->scir.offset, value); uv_cpu_hub_info(cpu)->scir.state = value; - uv_write_local_mmr8(uv_cpu_hub_info(cpu)->scir.offset, value); } } diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index d56b0efb2057..5f92494dab61 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -629,8 +629,10 @@ void __init uv_system_init(void) uv_rtc_init(); for_each_present_cpu(cpu) { + int apicid = per_cpu(x86_cpu_to_apicid, cpu); + nid = cpu_to_node(cpu); - pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu)); + pnode = uv_apicid_to_pnode(apicid); blade = boot_pnode_to_blade(pnode); lcpu = uv_blade_info[blade].nr_possible_cpus; uv_blade_info[blade].nr_possible_cpus++; @@ -651,15 +653,13 @@ void __init uv_system_init(void) uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra; uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base; uv_cpu_hub_info(cpu)->coherency_domain_number = sn_coherency_id; - uv_cpu_hub_info(cpu)->scir.offset = SCIR_LOCAL_MMR_BASE + lcpu; + uv_cpu_hub_info(cpu)->scir.offset = uv_scir_offset(apicid); uv_node_to_blade[nid] = blade; uv_cpu_to_blade[cpu] = blade; max_pnode = max(pnode, max_pnode); - printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, " - "lcpu %d, blade %d\n", - cpu, per_cpu(x86_cpu_to_apicid, cpu), pnode, nid, - lcpu, blade); + printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, lcpu %d, blade %d\n", + cpu, apicid, pnode, nid, lcpu, blade); } /* Add blade/pnode info for nodes without cpus */ From da2c3f0ead336c04b4d1ad36ff42d8d264f44f65 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Sat, 26 Dec 2009 16:25:18 +0800 Subject: [PATCH 0204/1626] [ARM] pxafb: fix building issue of incorrect reference Commit "d2a34c1 drivers/video: Move dereference after NULL test" introduced a build error of "fbi->dev->platform_data->smart_update" being unknown type to the compiler, fix this by removing the unnecessary test of 'fbi'. Cc: Julia Lawall Signed-off-by: Eric Miao --- drivers/video/pxafb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 415858b421b3..825b665245bb 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1221,9 +1221,9 @@ static void setup_smart_timing(struct pxafb_info *fbi, static int pxafb_smart_thread(void *arg) { struct pxafb_info *fbi = arg; - struct pxafb_mach_info *inf; + struct pxafb_mach_info *inf = fbi->dev->platform_data; - if (!fbi || !fbi->dev->platform_data->smart_update) { + if (!inf->smart_update) { pr_err("%s: not properly initialized, thread terminated\n", __func__); return -EINVAL; From 1692231cfda6577d411945ea1dacce548e63a0a4 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 23 Nov 2009 12:24:32 -0500 Subject: [PATCH 0205/1626] [ARM] pxa: use resource_size() in pwm.c Use resource_size for {request/release}_mem_region and ioremap. Signed-off-by: H Hartley Sweeten Signed-off-by: Eric Miao --- arch/arm/plat-pxa/pwm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c index a9eabdcfa163..51dc5c8106c0 100644 --- a/arch/arm/plat-pxa/pwm.c +++ b/arch/arm/plat-pxa/pwm.c @@ -204,14 +204,14 @@ static int __devinit pwm_probe(struct platform_device *pdev) goto err_free_clk; } - r = request_mem_region(r->start, r->end - r->start + 1, pdev->name); + r = request_mem_region(r->start, resource_size(r), pdev->name); if (r == NULL) { dev_err(&pdev->dev, "failed to request memory resource\n"); ret = -EBUSY; goto err_free_clk; } - pwm->mmio_base = ioremap(r->start, r->end - r->start + 1); + pwm->mmio_base = ioremap(r->start, resource_size(r)); if (pwm->mmio_base == NULL) { dev_err(&pdev->dev, "failed to ioremap() registers\n"); ret = -ENODEV; @@ -241,7 +241,7 @@ static int __devinit pwm_probe(struct platform_device *pdev) return 0; err_free_mem: - release_mem_region(r->start, r->end - r->start + 1); + release_mem_region(r->start, resource_size(r)); err_free_clk: clk_put(pwm->clk); err_free: @@ -271,7 +271,7 @@ static int __devexit pwm_remove(struct platform_device *pdev) iounmap(pwm->mmio_base); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, r->end - r->start + 1); + release_mem_region(r->start, resource_size(r)); clk_put(pwm->clk); kfree(pwm); From 6d26ce68e034fb3dc93e8d56452c85f57b322101 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 27 Dec 2009 16:04:35 +0100 Subject: [PATCH 0206/1626] [ARM] pxa/littleton: add UART3 GPIO config Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/littleton.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index f28c1715b910..fa527b258d61 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -110,6 +110,12 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = { GPIO7_MMC1_CLK, GPIO8_MMC1_CMD, GPIO15_GPIO, /* card detect */ + + /* UART3 */ + GPIO107_UART3_CTS, + GPIO108_UART3_RTS, + GPIO109_UART3_TXD, + GPIO110_UART3_RXD, }; static struct resource smc91x_resources[] = { From 9a8a0c46de1fac06e9b78d13edd7612a97d0061d Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 27 Dec 2009 18:14:25 +0100 Subject: [PATCH 0207/1626] [ARM] pxa/littleton: select CPU_PXA300 and CPU_PXA310 This has to be selected, otherwise some peripherals don't get initialized. Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 8a0837ea0294..dee92182749b 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -37,6 +37,8 @@ config MACH_ZYLONITE320 config MACH_LITTLETON bool "PXA3xx Form Factor Platform (aka Littleton)" select PXA3xx + select CPU_PXA300 + select CPU_PXA310 select PXA_SSP config MACH_TAVOREVB From 100627b4bacd0bd669aab5a68f8a0bfd0d28d002 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sat, 26 Dec 2009 21:24:11 +0100 Subject: [PATCH 0208/1626] [ARM] pxa/zeus: make internal zeus_get_pcb_info static Signed-off-by: Marc Zyngier Signed-off-by: Eric Miao --- arch/arm/mach-pxa/zeus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 5b986a8bd9e6..865df5d840e7 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -626,8 +626,8 @@ static void zeus_power_off(void) pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP); } -int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio, - unsigned ngpio, void *context) +static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio, + unsigned ngpio, void *context) { int i; u8 pcb_info = 0; From 5f86cebaa56268f1afa2321e6d424530b1a49a12 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sat, 26 Dec 2009 21:24:12 +0100 Subject: [PATCH 0209/1626] [ARM] pxa/zeus: relax memory timings on Zeus ethernet ports DM9000s on Zeus sometime fail under heavy load. Relaxing the timings a bit seems to be of a great help. Signed-off-by: Marc Zyngier Signed-off-by: Eric Miao --- arch/arm/mach-pxa/zeus.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 865df5d840e7..2f480a2b1531 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -726,9 +726,18 @@ static mfp_cfg_t zeus_pin_config[] __initdata = { GPIO99_GPIO, /* CF RDY */ }; +/* + * DM9k MSCx settings: SRAM, 16 bits + * 17 cycles delay first access + * 5 cycles delay next access + * 13 cycles recovery time + * faster device + */ +#define DM9K_MSC_VALUE 0xe4c9 + static void __init zeus_init(void) { - u16 dm9000_msc = 0xe279; + u16 dm9000_msc = DM9K_MSC_VALUE; system_rev = __raw_readw(ZEUS_CPLD_VERSION); pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f)); From a1916eb0ea142c5ac67289e65a022d5253a8ec92 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sat, 26 Dec 2009 21:24:13 +0100 Subject: [PATCH 0210/1626] [ARM] pxa/zeus: provide power-source information when APM is enabled Signed-off-by: Marc Zyngier Signed-off-by: Eric Miao --- arch/arm/mach-pxa/zeus.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 2f480a2b1531..75f2a37f945d 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -626,6 +627,25 @@ static void zeus_power_off(void) pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP); } +#ifdef CONFIG_APM_EMULATION +static void zeus_get_power_status(struct apm_power_info *info) +{ + /* Power supply is always present */ + info->ac_line_status = APM_AC_ONLINE; + info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT; + info->battery_flag = APM_BATTERY_FLAG_NOT_PRESENT; +} + +static inline void zeus_setup_apm(void) +{ + apm_get_power_status = zeus_get_power_status; +} +#else +static inline void zeus_setup_apm(void) +{ +} +#endif + static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *context) { @@ -747,6 +767,7 @@ static void __init zeus_init(void) MSC1 = (MSC1 & 0xffff0000) | dm9000_msc; pm_power_off = zeus_power_off; + zeus_setup_apm(); pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config)); From c57b9343437a801f0a93b272df8eabf1df102034 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 17 Dec 2009 14:56:57 +0100 Subject: [PATCH 0211/1626] [ARM] pxa/ttc_dkb: remove duplicate macro definition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ARRAY_AND_SIZE is already defined arch/arm/mach-mmp/common.h which is already included. Signed-off-by: Uwe Kleine-König Cc: Russell King Cc: Bin Yang Acked-by: Haojian Zhuang Signed-off-by: Eric Miao --- arch/arm/mach-mmp/ttc_dkb.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 8f49b2b12608..b22dec4abf78 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -24,8 +24,6 @@ #include "common.h" -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) - static unsigned long ttc_dkb_pin_config[] __initdata = { /* UART2 */ GPIO47_UART2_RXD, From f91e4906e26c053ab2ea6067c6354e49b71d8fa9 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Tue, 22 Dec 2009 07:29:40 -0500 Subject: [PATCH 0212/1626] [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot PXA mmc host driver supports card detect, read only and power gpio pin setting already. Zylonite platform driver needn't implement this any more. Signed-off-by: Haojian Zhuang Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/zylonite.h | 7 -- arch/arm/mach-pxa/zylonite.c | 87 ++++------------------- arch/arm/mach-pxa/zylonite_pxa300.c | 12 +--- arch/arm/mach-pxa/zylonite_pxa320.c | 4 -- 4 files changed, 16 insertions(+), 94 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h index bf6785adccf4..9edf645368d6 100644 --- a/arch/arm/mach-pxa/include/mach/zylonite.h +++ b/arch/arm/mach-pxa/include/mach/zylonite.h @@ -8,13 +8,6 @@ /* the following variables are processor specific and initialized * by the corresponding zylonite_pxa3xx_init() */ -struct platform_mmc_slot { - int gpio_cd; - int gpio_wp; -}; - -extern struct platform_mmc_slot zylonite_mmc_slot[]; - extern int gpio_eth_irq; extern int gpio_debug_led1; extern int gpio_debug_led2; diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index b66e9e2d06e7..2b4043c04d0c 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -36,9 +36,6 @@ #include "devices.h" #include "generic.h" -#define MAX_SLOTS 3 -struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS]; - int gpio_eth_irq; int gpio_debug_led1; int gpio_debug_led2; @@ -220,84 +217,28 @@ static inline void zylonite_init_lcd(void) {} #endif #if defined(CONFIG_MMC) -static int zylonite_mci_ro(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - - return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp); -} - -static int zylonite_mci_init(struct device *dev, - irq_handler_t zylonite_detect_int, - void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - int err, cd_irq, gpio_cd, gpio_wp; - - cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd); - gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd; - gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp; - - /* - * setup GPIO for Zylonite MMC controller - */ - err = gpio_request(gpio_cd, "mmc card detect"); - if (err) - goto err_request_cd; - gpio_direction_input(gpio_cd); - - err = gpio_request(gpio_wp, "mmc write protect"); - if (err) - goto err_request_wp; - gpio_direction_input(gpio_wp); - - err = request_irq(cd_irq, zylonite_detect_int, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "MMC card detect", data); - if (err) { - printk(KERN_ERR "%s: MMC/SD/SDIO: " - "can't request card detect IRQ\n", __func__); - goto err_request_irq; - } - - return 0; - -err_request_irq: - gpio_free(gpio_wp); -err_request_wp: - gpio_free(gpio_cd); -err_request_cd: - return err; -} - -static void zylonite_mci_exit(struct device *dev, void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - int cd_irq, gpio_cd, gpio_wp; - - cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd); - gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd; - gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp; - - free_irq(cd_irq, data); - gpio_free(gpio_cd); - gpio_free(gpio_wp); -} - static struct pxamci_platform_data zylonite_mci_platform_data = { .detect_delay = 20, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = zylonite_mci_init, - .exit = zylonite_mci_exit, - .get_ro = zylonite_mci_ro, - .gpio_card_detect = -1, - .gpio_card_ro = -1, + .gpio_card_detect = EXT_GPIO(0), + .gpio_card_ro = EXT_GPIO(2), .gpio_power = -1, }; static struct pxamci_platform_data zylonite_mci2_platform_data = { .detect_delay = 20, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .gpio_card_detect = EXT_GPIO(1), + .gpio_card_ro = EXT_GPIO(3), + .gpio_power = -1, +}; + +static struct pxamci_platform_data zylonite_mci3_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .gpio_card_detect = EXT_GPIO(30), + .gpio_card_ro = EXT_GPIO(31), + .gpio_power = -1, }; static void __init zylonite_init_mmc(void) @@ -305,7 +246,7 @@ static void __init zylonite_init_mmc(void) pxa_set_mci_info(&zylonite_mci_platform_data); pxa3xx_set_mci2_info(&zylonite_mci2_platform_data); if (cpu_is_pxa310()) - pxa3xx_set_mci3_info(&zylonite_mci_platform_data); + pxa3xx_set_mci3_info(&zylonite_mci3_platform_data); } #else static inline void zylonite_init_mmc(void) {} diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 84095440a878..3aa73b3e33f2 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -129,8 +129,8 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO22_I2C_SDA, /* GPIO */ - GPIO18_GPIO, /* GPIO Expander #0 INT_N */ - GPIO19_GPIO, /* GPIO Expander #1 INT_N */ + GPIO18_GPIO | MFP_PULL_HIGH, /* GPIO Expander #0 INT_N */ + GPIO19_GPIO | MFP_PULL_HIGH, /* GPIO Expander #1 INT_N */ }; static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { @@ -258,10 +258,6 @@ void __init zylonite_pxa300_init(void) /* detect LCD panel */ zylonite_detect_lcd_panel(); - /* MMC card detect & write protect for controller 0 */ - zylonite_mmc_slot[0].gpio_cd = EXT_GPIO(0); - zylonite_mmc_slot[0].gpio_wp = EXT_GPIO(2); - /* WM9713 IRQ */ wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26); @@ -276,10 +272,6 @@ void __init zylonite_pxa300_init(void) if (cpu_is_pxa310()) { pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg)); gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102); - - /* MMC card detect & write protect for controller 2 */ - zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30); - zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31); } /* GPIOs for Debug LEDs */ diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 60d08f23f5e4..9942bac4cf7d 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -209,10 +209,6 @@ void __init zylonite_pxa320_init(void) gpio_debug_led1 = mfp_to_gpio(MFP_PIN_GPIO1_2); gpio_debug_led2 = mfp_to_gpio(MFP_PIN_GPIO4_2); - /* MMC card detect & write protect for controller 0 */ - zylonite_mmc_slot[0].gpio_cd = mfp_to_gpio(MFP_PIN_GPIO1); - zylonite_mmc_slot[0].gpio_wp = mfp_to_gpio(MFP_PIN_GPIO5); - /* WM9713 IRQ */ wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15); } From 91a86a964f0773fdf466fe02577c8494ca8e2083 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 25 Dec 2009 09:21:34 +0800 Subject: [PATCH 0213/1626] [ARM] pxa/poodle: fix incorrect 'gpio_card_detect' of MMC Signed-off-by: Eric Miao --- arch/arm/mach-pxa/poodle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index e5eeb3a62d01..c2b938a4d5c9 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -293,7 +293,7 @@ static struct pxamci_platform_data poodle_mci_platform_data = { .init = poodle_mci_init, .setpower = poodle_mci_setpower, .exit = poodle_mci_exit, - .gpio_card_detect = POODLE_IRQ_GPIO_nSD_DETECT, + .gpio_card_detect = POODLE_GPIO_nSD_DETECT, .gpio_card_ro = POODLE_GPIO_nSD_WP, .gpio_power = -1, }; From 81744ee44ab2845c16ffd7d6f762f7b4a49a4750 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Tue, 29 Dec 2009 08:35:35 +0100 Subject: [PATCH 0214/1626] block: Fix incorrect alignment offset reporting and update documentation queue_sector_alignment_offset returned the wrong value which caused partitions to report an incorrect alignment_offset. Since offset alignment calculation is needed several places it has been split into a separate helper function. The topology stacking function has been updated accordingly. Furthermore, comments have been added to clarify how the stacking function works. Signed-off-by: Martin K. Petersen Tested-by: Mike Snitzer Signed-off-by: Jens Axboe --- block/blk-settings.c | 44 +++++++++++++++++++++++++++++++----------- include/linux/blkdev.h | 11 +++++++++-- 2 files changed, 42 insertions(+), 13 deletions(-) diff --git a/block/blk-settings.c b/block/blk-settings.c index e14fcbcedbfa..d52d4adc440b 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -505,20 +505,30 @@ static unsigned int lcm(unsigned int a, unsigned int b) /** * blk_stack_limits - adjust queue_limits for stacked devices - * @t: the stacking driver limits (top) - * @b: the underlying queue limits (bottom) + * @t: the stacking driver limits (top device) + * @b: the underlying queue limits (bottom, component device) * @offset: offset to beginning of data within component device * * Description: - * Merges two queue_limit structs. Returns 0 if alignment didn't - * change. Returns -1 if adding the bottom device caused - * misalignment. + * This function is used by stacking drivers like MD and DM to ensure + * that all component devices have compatible block sizes and + * alignments. The stacking driver must provide a queue_limits + * struct (top) and then iteratively call the stacking function for + * all component (bottom) devices. The stacking function will + * attempt to combine the values and ensure proper alignment. + * + * Returns 0 if the top and bottom queue_limits are compatible. The + * top device's block sizes and alignment offsets may be adjusted to + * ensure alignment with the bottom device. If no compatible sizes + * and alignments exist, -1 is returned and the resulting top + * queue_limits will have the misaligned flag set to indicate that + * the alignment_offset is undefined. */ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, sector_t offset) { sector_t alignment; - unsigned int top, bottom, granularity; + unsigned int top, bottom; t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors); t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors); @@ -536,15 +546,18 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, t->max_segment_size = min_not_zero(t->max_segment_size, b->max_segment_size); - granularity = max(b->physical_block_size, b->io_min); - alignment = b->alignment_offset - (offset & (granularity - 1)); + alignment = queue_limit_alignment_offset(b, offset); + /* Bottom device has different alignment. Check that it is + * compatible with the current top alignment. + */ if (t->alignment_offset != alignment) { top = max(t->physical_block_size, t->io_min) + t->alignment_offset; - bottom = granularity + alignment; + bottom = max(b->physical_block_size, b->io_min) + alignment; + /* Verify that top and bottom intervals line up */ if (max(top, bottom) & (min(top, bottom) - 1)) t->misaligned = 1; } @@ -561,32 +574,39 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, t->no_cluster |= b->no_cluster; t->discard_zeroes_data &= b->discard_zeroes_data; + /* Physical block size a multiple of the logical block size? */ if (t->physical_block_size & (t->logical_block_size - 1)) { t->physical_block_size = t->logical_block_size; t->misaligned = 1; } + /* Minimum I/O a multiple of the physical block size? */ if (t->io_min & (t->physical_block_size - 1)) { t->io_min = t->physical_block_size; t->misaligned = 1; } + /* Optimal I/O a multiple of the physical block size? */ if (t->io_opt & (t->physical_block_size - 1)) { t->io_opt = 0; t->misaligned = 1; } + /* Find lowest common alignment_offset */ t->alignment_offset = lcm(t->alignment_offset, alignment) & (max(t->physical_block_size, t->io_min) - 1); + /* Verify that new alignment_offset is on a logical block boundary */ if (t->alignment_offset & (t->logical_block_size - 1)) t->misaligned = 1; /* Discard alignment and granularity */ if (b->discard_granularity) { + unsigned int granularity = b->discard_granularity; + offset &= granularity - 1; - alignment = b->discard_alignment - - (offset & (b->discard_granularity - 1)); + alignment = (granularity + b->discard_alignment - offset) + & (granularity - 1); if (t->discard_granularity != 0 && t->discard_alignment != alignment) { @@ -598,6 +618,8 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, t->discard_misaligned = 1; } + t->max_discard_sectors = min_not_zero(t->max_discard_sectors, + b->max_discard_sectors); t->discard_granularity = max(t->discard_granularity, b->discard_granularity); t->discard_alignment = lcm(t->discard_alignment, alignment) & diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 784a919aa0d0..59b832be3044 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1116,11 +1116,18 @@ static inline int queue_alignment_offset(struct request_queue *q) return q->limits.alignment_offset; } +static inline int queue_limit_alignment_offset(struct queue_limits *lim, sector_t offset) +{ + unsigned int granularity = max(lim->physical_block_size, lim->io_min); + + offset &= granularity - 1; + return (granularity + lim->alignment_offset - offset) & (granularity - 1); +} + static inline int queue_sector_alignment_offset(struct request_queue *q, sector_t sector) { - return ((sector << 9) - q->limits.alignment_offset) - & (q->limits.io_min - 1); + return queue_limit_alignment_offset(&q->limits, sector << 9); } static inline int bdev_alignment_offset(struct block_device *bdev) From e79e95db5cffb2e01170d510686489c40937faa1 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 29 Dec 2009 08:53:54 +0100 Subject: [PATCH 0215/1626] block: Honor the gfp_mask for alloc_page() in blkdev_issue_discard() Signed-off-by: OGAWA Hirofumi Signed-off-by: Jens Axboe --- block/blk-barrier.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/blk-barrier.c b/block/blk-barrier.c index 8873b9b439ff..8618d8996fea 100644 --- a/block/blk-barrier.c +++ b/block/blk-barrier.c @@ -402,7 +402,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, * our current implementations need. If we'll ever need * more the interface will need revisiting. */ - page = alloc_page(GFP_KERNEL | __GFP_ZERO); + page = alloc_page(gfp_mask | __GFP_ZERO); if (!page) goto out_free_bio; if (bio_add_pc_page(q, bio, page, sector_size, 0) < sector_size) From 0798219f6154baa6a8efe767bfffb4a724e4b1e1 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Mon, 28 Dec 2009 16:58:38 +0100 Subject: [PATCH 0216/1626] drbd: Use drbd_crypto_is_hash() instead of an open coded check Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_nl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c index 4e0726aa53b0..3313901a4861 100644 --- a/drivers/block/drbd/drbd_nl.c +++ b/drivers/block/drbd/drbd_nl.c @@ -1271,7 +1271,7 @@ static int drbd_nl_net_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp, goto fail; } - if (crypto_tfm_alg_type(crypto_hash_tfm(tfm)) != CRYPTO_ALG_TYPE_SHASH) { + if (!drbd_crypto_is_hash(crypto_hash_tfm(tfm))) { retcode = ERR_AUTH_ALG_ND; goto fail; } From 0a6dbf2bc4ea3781c530f895e2d92fd3c4a735a2 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Mon, 28 Dec 2009 16:58:38 +0100 Subject: [PATCH 0217/1626] drbd: Fix for a race between IO and a detach operation [Bugz 262] In D_DISKLESS we do not hand out any new references to ldev (local_cnt) therefore waiting until all previously handed out refereces got returned is sufficient before actually freeing mdev->ldev. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 9348f33f6242..e898ad9eb1c3 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -1298,6 +1298,7 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os, dev_err(DEV, "Sending state in drbd_io_error() failed\n"); } + wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt)); lc_destroy(mdev->resync); mdev->resync = NULL; lc_destroy(mdev->act_log); From 89f01d5cd3c7ef01239bf15283181a0091c78657 Mon Sep 17 00:00:00 2001 From: Johannes Thoma Date: Tue, 29 Dec 2009 16:38:04 +0100 Subject: [PATCH 0218/1626] drbd: Kconfig fix !CONFIG_OPT evalues to FALSE if CONFIG_OPT='m'. Do not display the "DRBD disabled..." message if the dependencies are compiled as module. Signed-off-by: Johannes Thoma Signed-off-by: Philipp Reisner --- drivers/block/drbd/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/Kconfig b/drivers/block/drbd/Kconfig index f4acd04ebeef..df0983787390 100644 --- a/drivers/block/drbd/Kconfig +++ b/drivers/block/drbd/Kconfig @@ -3,7 +3,7 @@ # comment "DRBD disabled because PROC_FS, INET or CONNECTOR not selected" - depends on !PROC_FS || !INET || !CONNECTOR + depends on PROC_FS='n' || INET='n' || CONNECTOR='n' config BLK_DEV_DRBD tristate "DRBD Distributed Replicated Block Device support" From db5d247ae811f49185a71e703b65acad845e4b18 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 24 Dec 2009 12:05:58 +0100 Subject: [PATCH 0219/1626] firewire: fix use of multiple AV/C devices, allow multiple FCP listeners Control of more than one AV/C device at once --- e.g. camcorders, tape decks, audio devices, TV tuners --- failed or worked only unreliably, depending on driver implementation. This affected kernelspace and userspace drivers alike and was caused by firewire-core's inability to accept multiple registrations of FCP listeners. The fix allows multiple address handlers to be registered for the FCP command and response registers. When a request for these registers is received, all handlers are invoked, and the Firewire response is generated by the core and not by any handler. The cdev API does not change, i.e., userspace is still expected to send a response for FCP requests; this response is silently ignored. Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter (changelog, rebased, whitespace) --- drivers/firewire/core-cdev.c | 26 +++--- drivers/firewire/core-transaction.c | 118 +++++++++++++++++++----- drivers/media/dvb/firewire/firedtv-fw.c | 12 +-- include/linux/firewire-cdev.h | 3 + include/linux/firewire.h | 4 +- 5 files changed, 119 insertions(+), 44 deletions(-) diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index 231e6ee5ba43..2cb22d160f6e 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -601,8 +601,9 @@ static void release_request(struct client *client, struct inbound_transaction_resource *r = container_of(resource, struct inbound_transaction_resource, resource); - fw_send_response(client->device->card, r->request, - RCODE_CONFLICT_ERROR); + if (r->request) + fw_send_response(client->device->card, r->request, + RCODE_CONFLICT_ERROR); kfree(r); } @@ -645,7 +646,8 @@ static void handle_request(struct fw_card *card, struct fw_request *request, failed: kfree(r); kfree(e); - fw_send_response(card, request, RCODE_CONFLICT_ERROR); + if (request) + fw_send_response(card, request, RCODE_CONFLICT_ERROR); } static void release_address_handler(struct client *client, @@ -715,15 +717,17 @@ static int ioctl_send_response(struct client *client, void *buffer) r = container_of(resource, struct inbound_transaction_resource, resource); - if (request->length < r->length) - r->length = request->length; - - if (copy_from_user(r->data, u64_to_uptr(request->data), r->length)) { - ret = -EFAULT; - goto out; + if (r->request) { + if (request->length < r->length) + r->length = request->length; + if (copy_from_user(r->data, u64_to_uptr(request->data), + r->length)) { + ret = -EFAULT; + goto out; + } + fw_send_response(client->device->card, r->request, + request->rcode); } - - fw_send_response(client->device->card, r->request, request->rcode); out: kfree(r); diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c index 842739df23e2..495849eb13cc 100644 --- a/drivers/firewire/core-transaction.c +++ b/drivers/firewire/core-transaction.c @@ -432,14 +432,20 @@ static struct fw_address_handler *lookup_overlapping_address_handler( return NULL; } +static bool is_enclosing_handler(struct fw_address_handler *handler, + unsigned long long offset, size_t length) +{ + return handler->offset <= offset && + offset + length <= handler->offset + handler->length; +} + static struct fw_address_handler *lookup_enclosing_address_handler( struct list_head *list, unsigned long long offset, size_t length) { struct fw_address_handler *handler; list_for_each_entry(handler, list, link) { - if (handler->offset <= offset && - offset + length <= handler->offset + handler->length) + if (is_enclosing_handler(handler, offset, length)) return handler; } @@ -465,6 +471,12 @@ const struct fw_address_region fw_unit_space_region = { .start = 0xfffff0000900ULL, .end = 0x1000000000000ULL, }; #endif /* 0 */ +static bool is_in_fcp_region(u64 offset, size_t length) +{ + return offset >= (CSR_REGISTER_BASE | CSR_FCP_COMMAND) && + offset + length <= (CSR_REGISTER_BASE | CSR_FCP_END); +} + /** * fw_core_add_address_handler - register for incoming requests * @handler: callback @@ -477,8 +489,11 @@ const struct fw_address_region fw_unit_space_region = * give the details of the particular request. * * Return value: 0 on success, non-zero otherwise. + * * The start offset of the handler's address region is determined by * fw_core_add_address_handler() and is returned in handler->offset. + * + * Address allocations are exclusive, except for the FCP registers. */ int fw_core_add_address_handler(struct fw_address_handler *handler, const struct fw_address_region *region) @@ -498,10 +513,12 @@ int fw_core_add_address_handler(struct fw_address_handler *handler, handler->offset = region->start; while (handler->offset + handler->length <= region->end) { - other = - lookup_overlapping_address_handler(&address_handler_list, - handler->offset, - handler->length); + if (is_in_fcp_region(handler->offset, handler->length)) + other = NULL; + else + other = lookup_overlapping_address_handler + (&address_handler_list, + handler->offset, handler->length); if (other != NULL) { handler->offset += other->length; } else { @@ -668,6 +685,9 @@ static struct fw_request *allocate_request(struct fw_packet *p) void fw_send_response(struct fw_card *card, struct fw_request *request, int rcode) { + if (WARN_ONCE(!request, "invalid for FCP address handlers")) + return; + /* unified transaction or broadcast transaction: don't respond */ if (request->ack != ACK_PENDING || HEADER_DESTINATION_IS_BROADCAST(request->request_header[0])) { @@ -686,26 +706,15 @@ void fw_send_response(struct fw_card *card, } EXPORT_SYMBOL(fw_send_response); -void fw_core_handle_request(struct fw_card *card, struct fw_packet *p) +static void handle_exclusive_region_request(struct fw_card *card, + struct fw_packet *p, + struct fw_request *request, + unsigned long long offset) { struct fw_address_handler *handler; - struct fw_request *request; - unsigned long long offset; unsigned long flags; int tcode, destination, source; - if (p->ack != ACK_PENDING && p->ack != ACK_COMPLETE) - return; - - request = allocate_request(p); - if (request == NULL) { - /* FIXME: send statically allocated busy packet. */ - return; - } - - offset = - ((unsigned long long) - HEADER_GET_OFFSET_HIGH(p->header[1]) << 32) | p->header[2]; tcode = HEADER_GET_TCODE(p->header[0]); destination = HEADER_GET_DESTINATION(p->header[0]); source = HEADER_GET_SOURCE(p->header[1]); @@ -732,6 +741,73 @@ void fw_core_handle_request(struct fw_card *card, struct fw_packet *p) request->data, request->length, handler->callback_data); } + +static void handle_fcp_region_request(struct fw_card *card, + struct fw_packet *p, + struct fw_request *request, + unsigned long long offset) +{ + struct fw_address_handler *handler; + unsigned long flags; + int tcode, destination, source; + + if ((offset != (CSR_REGISTER_BASE | CSR_FCP_COMMAND) && + offset != (CSR_REGISTER_BASE | CSR_FCP_RESPONSE)) || + request->length > 0x200) { + fw_send_response(card, request, RCODE_ADDRESS_ERROR); + + return; + } + + tcode = HEADER_GET_TCODE(p->header[0]); + destination = HEADER_GET_DESTINATION(p->header[0]); + source = HEADER_GET_SOURCE(p->header[1]); + + if (tcode != TCODE_WRITE_QUADLET_REQUEST && + tcode != TCODE_WRITE_BLOCK_REQUEST) { + fw_send_response(card, request, RCODE_TYPE_ERROR); + + return; + } + + spin_lock_irqsave(&address_handler_lock, flags); + list_for_each_entry(handler, &address_handler_list, link) { + if (is_enclosing_handler(handler, offset, request->length)) + handler->address_callback(card, NULL, tcode, + destination, source, + p->generation, p->speed, + offset, request->data, + request->length, + handler->callback_data); + } + spin_unlock_irqrestore(&address_handler_lock, flags); + + fw_send_response(card, request, RCODE_COMPLETE); +} + +void fw_core_handle_request(struct fw_card *card, struct fw_packet *p) +{ + struct fw_request *request; + unsigned long long offset; + + if (p->ack != ACK_PENDING && p->ack != ACK_COMPLETE) + return; + + request = allocate_request(p); + if (request == NULL) { + /* FIXME: send statically allocated busy packet. */ + return; + } + + offset = ((u64)HEADER_GET_OFFSET_HIGH(p->header[1]) << 32) | + p->header[2]; + + if (!is_in_fcp_region(offset, request->length)) + handle_exclusive_region_request(card, p, request, offset); + else + handle_fcp_region_request(card, p, request, offset); + +} EXPORT_SYMBOL(fw_core_handle_request); void fw_core_handle_response(struct fw_card *card, struct fw_packet *p) diff --git a/drivers/media/dvb/firewire/firedtv-fw.c b/drivers/media/dvb/firewire/firedtv-fw.c index fe44789ab037..6223bf01efe9 100644 --- a/drivers/media/dvb/firewire/firedtv-fw.c +++ b/drivers/media/dvb/firewire/firedtv-fw.c @@ -202,14 +202,8 @@ static void handle_fcp(struct fw_card *card, struct fw_request *request, unsigned long flags; int su; - if ((tcode != TCODE_WRITE_QUADLET_REQUEST && - tcode != TCODE_WRITE_BLOCK_REQUEST) || - offset != CSR_REGISTER_BASE + CSR_FCP_RESPONSE || - length == 0 || - (((u8 *)payload)[0] & 0xf0) != 0) { - fw_send_response(card, request, RCODE_TYPE_ERROR); + if (length < 2 || (((u8 *)payload)[0] & 0xf0) != 0) return; - } su = ((u8 *)payload)[1] & 0x7; @@ -230,10 +224,8 @@ static void handle_fcp(struct fw_card *card, struct fw_request *request, } spin_unlock_irqrestore(&node_list_lock, flags); - if (fdtv) { + if (fdtv) avc_recv(fdtv, payload, length); - fw_send_response(card, request, RCODE_COMPLETE); - } } static struct fw_address_handler fcp_handler = { diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h index c6b3ca3af6df..1f716d9f714b 100644 --- a/include/linux/firewire-cdev.h +++ b/include/linux/firewire-cdev.h @@ -340,6 +340,9 @@ struct fw_cdev_send_response { * The @closure field is passed back to userspace in the response event. * The @handle field is an out parameter, returning a handle to the allocated * range to be used for later deallocation of the range. + * + * The address range is allocated on all local nodes. The address allocation + * is exclusive except for the FCP command and response registers. */ struct fw_cdev_allocate { __u64 offset; diff --git a/include/linux/firewire.h b/include/linux/firewire.h index 9416a461b696..a0e67150a729 100644 --- a/include/linux/firewire.h +++ b/include/linux/firewire.h @@ -248,8 +248,8 @@ typedef void (*fw_transaction_callback_t)(struct fw_card *card, int rcode, void *data, size_t length, void *callback_data); /* - * Important note: The callback must guarantee that either fw_send_response() - * or kfree() is called on the @request. + * Important note: Except for the FCP registers, the callback must guarantee + * that either fw_send_response() or kfree() is called on the @request. */ typedef void (*fw_address_callback_t)(struct fw_card *card, struct fw_request *request, From cf0e575dcc4cab9fd955e9bec49df7e8ee30a7cf Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 26 Dec 2009 01:34:29 +0100 Subject: [PATCH 0220/1626] firewire: cdev: fix another memory leak in an error path If copy_from_user in an FW_CDEV_IOC_SEND_RESPONSE ioctl failed, the fw_request pointed to by the inbound_transaction_resource is no longer referenced and needs to be freed. Signed-off-by: Stefan Richter --- drivers/firewire/core-cdev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index 2cb22d160f6e..e6d63849e78e 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -723,6 +723,7 @@ static int ioctl_send_response(struct client *client, void *buffer) if (copy_from_user(r->data, u64_to_uptr(request->data), r->length)) { ret = -EFAULT; + kfree(r->request); goto out; } fw_send_response(client->device->card, r->request, From 090699c0530ae5380a9b8511d76f656cc437bb6e Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 26 Dec 2009 01:35:14 +0100 Subject: [PATCH 0221/1626] firewire: ohci: always use packet-per-buffer mode for isochronous reception This is a minimal change meant for the short term: Never set the ohci->use_dualbuffer flag to true. There are two reasons to do so: - Packet-per-buffer mode and dual-buffer mode do not behave the same under certain circumstances, notably if several packets are covered by a single fw_cdev_iso_packet descriptor. http://marc.info/?l=linux1394-devel&m=124965653718313 Therefore the driver stack should not silently choose one or the other mode but should leave the choice to the high-level driver (regardless if kernel driver or userspace driver). Or simply always only offer packet-per-buffer mode, since a considerable number of controllers, even current ones, does not offer dual-buffer support. - Even under circumstances where packet-per-buffer mode and dual-buffer mode behave exactly the same --- notably when used through libraw1394, libdc1394, as well as the current two kernel drivers which use isochronous reception (firewire-net and firedtv) --- we are still faced with the problem that several OHCI 1.1 controllers have bugs in dual-buffer mode. Although it looks like we have identified most of those buggy controllers by now, we cannot be quite sure about that. So, use packet-per-buffer by default from now on. This change should be followed up by a more complete solution: Either extend the in-kernel API and the userspace ABI by a choice between the two IR modes or remove all dual-buffer related code from firewire-ohci. Signed-off-by: Stefan Richter --- drivers/firewire/ohci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 96768e160866..a61571c63c59 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -2226,7 +2226,6 @@ static int ohci_queue_iso_receive_dualbuffer(struct fw_iso_context *base, if (rest == 0) return -EINVAL; - /* FIXME: make packet-per-buffer/dual-buffer a context option */ while (rest > 0) { d = context_get_descriptors(&ctx->context, z + header_z, &d_bus); @@ -2470,7 +2469,10 @@ static int __devinit pci_probe(struct pci_dev *dev, } version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff; +#if 0 + /* FIXME: make it a context option or remove dual-buffer mode */ ohci->use_dualbuffer = version >= OHCI_VERSION_1_1; +#endif /* dual-buffer mode is broken if more than one IR context is active */ if (dev->vendor == PCI_VENDOR_ID_AGERE && From 958a29cb1c9161d61dcd4ced51f260578e19823c Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 26 Dec 2009 01:36:12 +0100 Subject: [PATCH 0222/1626] firewire, ieee1394: update MAINTAINERS entries Ben and Kristian have not been involved in maintenance of the IEEE 1394 drivers for quite some time; submitters are not required to Cc them on patches. The linux1394.org domain has been dead for a while and is no longer under control of a Linux developer. The current web site of the Linux 1394 project is http://ieee1394.wiki.kernel.org/. The classic drivers/ieee1394/ stack is now obsolete from the development point of view, though still a useful alternative in productive use. But nobody should attempt to submit style cleanup patches for it or to develop new drivers on top of this stack, hence mark its MAINTAINERS entry as Obsolete. drivers/ieee1394/raw1394*, like the rest of the old stack, does not receive bigger code changes anymore, hence shrink the MAINTAINERS database a bit by dropping raw1394's special entry. If something important and urgent is going to come up for raw1394, I will make sure that Dan will be notified of it besides via linux1394-devel. Signed-off-by: Stefan Richter Signed-off-by: Dan Dennedy Cc: Ben Collins Cc: Kristian Hoegsberg --- MAINTAINERS | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 66f5f7dab285..c22d597e6ace 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2169,10 +2169,9 @@ F: drivers/hwmon/f75375s.c F: include/linux/f75375s.h FIREWIRE SUBSYSTEM -M: Kristian Hoegsberg M: Stefan Richter L: linux1394-devel@lists.sourceforge.net -W: http://www.linux1394.org/ +W: http://ieee1394.wiki.kernel.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git S: Maintained F: drivers/firewire/ @@ -2705,22 +2704,14 @@ S: Supported F: drivers/idle/i7300_idle.c IEEE 1394 SUBSYSTEM -M: Ben Collins M: Stefan Richter L: linux1394-devel@lists.sourceforge.net -W: http://www.linux1394.org/ +W: http://ieee1394.wiki.kernel.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git -S: Maintained +S: Obsolete F: Documentation/debugging-via-ohci1394.txt F: drivers/ieee1394/ -IEEE 1394 RAW I/O DRIVER -M: Dan Dennedy -M: Stefan Richter -L: linux1394-devel@lists.sourceforge.net -S: Maintained -F: drivers/ieee1394/raw1394* - IEEE 802.15.4 SUBSYSTEM M: Dmitry Eremin-Solenikov M: Sergey Lapin From 5d7db0499e5bb13381a7fbfdd0d913b966545e75 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 26 Dec 2009 01:36:53 +0100 Subject: [PATCH 0223/1626] firewire, ieee1394: update Kconfig help Update the Kconfig help texts of both stacks to encourage a general move from the older to the newer drivers. However, do not label ieee1394 as "Obsolete" yet, as the newer drivers have not been deployed as default stack in the majority of Linux distributions yet, and those who start doing so now may still want to install the old drivers as fallback for unforeseen issues. Since Linux 2.6.32, FireWire audio devices can be driven by the newer firewire driver stack too, hence remove an outdated comment about audio devices. Also remove comments about library versions since the 2nd generation of libraw1394 and libdc1394 is now in common use; details on library versions can be read at the wiki link from the help texts. Signed-off-by: Stefan Richter --- drivers/Kconfig | 2 +- drivers/firewire/Kconfig | 44 +++++++++--------------------- drivers/ieee1394/Kconfig | 59 ++++++++++++++++++++++++++++------------ 3 files changed, 56 insertions(+), 49 deletions(-) diff --git a/drivers/Kconfig b/drivers/Kconfig index 8a07363417ed..368ae6d3a096 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -28,7 +28,7 @@ source "drivers/md/Kconfig" source "drivers/message/fusion/Kconfig" -source "drivers/ieee1394/Kconfig" +source "drivers/firewire/Kconfig" source "drivers/message/i2o/Kconfig" diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig index 13efcd362072..a9371b36a9b9 100644 --- a/drivers/firewire/Kconfig +++ b/drivers/firewire/Kconfig @@ -1,5 +1,10 @@ +menu "IEEE 1394 (FireWire) support" + depends on PCI || BROKEN + # firewire-core does not depend on PCI but is + # not useful without PCI controller driver + comment "You can enable one or both FireWire driver stacks." -comment "See the help texts for more information." +comment "The newer stack is recommended." config FIREWIRE tristate "FireWire driver stack" @@ -15,16 +20,6 @@ config FIREWIRE To compile this driver as a module, say M here: the module will be called firewire-core. - This module functionally replaces ieee1394, raw1394, and video1394. - To access it from application programs, you generally need at least - libraw1394 v2. IIDC/DCAM applications need libdc1394 v2. - No libraries are required to access storage devices through the - firewire-sbp2 driver. - - NOTE: - FireWire audio devices currently require the old drivers (ieee1394, - ohci1394, raw1394). - config FIREWIRE_OHCI tristate "OHCI-1394 controllers" depends on PCI && FIREWIRE @@ -34,22 +29,7 @@ config FIREWIRE_OHCI is the only chipset in use, so say Y here. To compile this driver as a module, say M here: The module will be - called firewire-ohci. It replaces ohci1394 of the classic IEEE 1394 - stack. - - NOTE: - If you want to install firewire-ohci and ohci1394 together, you - should configure them only as modules and blacklist the driver(s) - which you don't want to have auto-loaded. Add either - - blacklist firewire-ohci - or - blacklist ohci1394 - blacklist video1394 - blacklist dv1394 - - to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf - depending on your distribution. + called firewire-ohci. config FIREWIRE_OHCI_DEBUG bool @@ -66,8 +46,7 @@ config FIREWIRE_SBP2 like scanners. To compile this driver as a module, say M here: The module will be - called firewire-sbp2. It replaces sbp2 of the classic IEEE 1394 - stack. + called firewire-sbp2. You should also enable support for disks, CD-ROMs, etc. in the SCSI configuration section. @@ -83,5 +62,8 @@ config FIREWIRE_NET NOTE, this driver is not stable yet! To compile this driver as a module, say M here: The module will be - called firewire-net. It replaces eth1394 of the classic IEEE 1394 - stack. + called firewire-net. + +source "drivers/ieee1394/Kconfig" + +endmenu diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig index f102fcc7e52a..e02096cf7d95 100644 --- a/drivers/ieee1394/Kconfig +++ b/drivers/ieee1394/Kconfig @@ -1,8 +1,3 @@ -menu "IEEE 1394 (FireWire) support" - depends on PCI || BROKEN - -source "drivers/firewire/Kconfig" - config IEEE1394 tristate "Legacy alternative FireWire driver stack" depends on PCI || BROKEN @@ -16,8 +11,13 @@ config IEEE1394 is the core support only, you will also need to select a driver for your IEEE 1394 adapter. - To compile this driver as a module, say M here: the - module will be called ieee1394. + To compile this driver as a module, say M here: the module will be + called ieee1394. + + NOTE: + ieee1394 is superseded by the newer firewire-core driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. config IEEE1394_OHCI1394 tristate "OHCI-1394 controllers" @@ -29,19 +29,23 @@ config IEEE1394_OHCI1394 use one of these chipsets. It should work with any OHCI-1394 compliant card, however. - To compile this driver as a module, say M here: the - module will be called ohci1394. + To compile this driver as a module, say M here: the module will be + called ohci1394. NOTE: + ohci1394 is superseded by the newer firewire-ohci driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + If you want to install firewire-ohci and ohci1394 together, you should configure them only as modules and blacklist the driver(s) which you don't want to have auto-loaded. Add either - blacklist firewire-ohci - or blacklist ohci1394 blacklist video1394 blacklist dv1394 + or + blacklist firewire-ohci to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf depending on your distribution. @@ -58,8 +62,8 @@ config IEEE1394_PCILYNX Instruments PCILynx chip. Note: this driver is written for revision 2 of this chip and may not work with revision 0. - To compile this driver as a module, say M here: the - module will be called pcilynx. + To compile this driver as a module, say M here: the module will be + called pcilynx. Only some old and now very rare PCI and CardBus cards and PowerMacs G3 B&W contain the PCILynx controller. Therefore @@ -79,6 +83,14 @@ config IEEE1394_SBP2 You should also enable support for disks, CD-ROMs, etc. in the SCSI configuration section. + To compile this driver as a module, say M here: the module will be + called sbp2. + + NOTE: + sbp2 is superseded by the newer firewire-sbp2 driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_SBP2_PHYS_DMA bool "Enable replacement for physical DMA in SBP2" depends on IEEE1394_SBP2 && VIRT_TO_BUS && EXPERIMENTAL @@ -111,6 +123,11 @@ config IEEE1394_ETH1394 The module is called eth1394 although it does not emulate Ethernet. + NOTE: + eth1394 is superseded by the newer firewire-net driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_RAWIO tristate "raw1394 userspace interface" depends on IEEE1394 @@ -123,6 +140,11 @@ config IEEE1394_RAWIO To compile this driver as a module, say M here: the module will be called raw1394. + NOTE: + raw1394 is superseded by the newer firewire-core driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_VIDEO1394 tristate "video1394 userspace interface" depends on IEEE1394 && IEEE1394_OHCI1394 @@ -136,13 +158,18 @@ config IEEE1394_VIDEO1394 To compile this driver as a module, say M here: the module will be called video1394. + NOTE: + video1394 is superseded by the newer firewire-core driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_DV1394 tristate "dv1394 userspace interface (deprecated)" depends on IEEE1394 && IEEE1394_OHCI1394 help The dv1394 driver is unsupported and may be removed from Linux in a - future release. Its functionality is now provided by raw1394 together - with libraries such as libiec61883. + future release. Its functionality is now provided by either + raw1394 or firewire-core together with libraries such as libiec61883. config IEEE1394_VERBOSEDEBUG bool "Excessive debugging output" @@ -153,5 +180,3 @@ config IEEE1394_VERBOSEDEBUG will quickly result in large amounts of data sent to the system log. Say Y if you really need the debugging output. Everyone else says N. - -endmenu From 55afc80b2ab100618c17af77915f75307b6bd5d1 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 29 Dec 2009 14:07:42 -0500 Subject: [PATCH 0224/1626] Revert "b43: Enforce DMA descriptor memory constraints" This reverts commit 9bd568a50c446433038dec2a5186c5c57c3dbd23. That commit is shown to cause allocation failures during initialization on some machines. http://bugzilla.kernel.org/show_bug.cgi?id=14844 Signed-off-by: John W. Linville --- drivers/net/wireless/b43/dma.c | 195 ++++++++------------------------- drivers/net/wireless/b43/dma.h | 7 +- 2 files changed, 45 insertions(+), 157 deletions(-) diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 027be275e035..88d1fd02d40a 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -383,160 +383,44 @@ static inline } } -/* Check if a DMA region fits the device constraints. - * Returns true, if the region is OK for usage with this device. */ -static inline bool b43_dma_address_ok(struct b43_dmaring *ring, - dma_addr_t addr, size_t size) -{ - switch (ring->type) { - case B43_DMA_30BIT: - if ((u64)addr + size > (1ULL << 30)) - return 0; - break; - case B43_DMA_32BIT: - if ((u64)addr + size > (1ULL << 32)) - return 0; - break; - case B43_DMA_64BIT: - /* Currently we can't have addresses beyond - * 64bit in the kernel. */ - break; - } - return 1; -} - -#define is_4k_aligned(addr) (((u64)(addr) & 0x0FFFull) == 0) -#define is_8k_aligned(addr) (((u64)(addr) & 0x1FFFull) == 0) - -static void b43_unmap_and_free_ringmem(struct b43_dmaring *ring, void *base, - dma_addr_t dmaaddr, size_t size) -{ - ssb_dma_unmap_single(ring->dev->dev, dmaaddr, size, DMA_TO_DEVICE); - free_pages((unsigned long)base, get_order(size)); -} - -static void * __b43_get_and_map_ringmem(struct b43_dmaring *ring, - dma_addr_t *dmaaddr, size_t size, - gfp_t gfp_flags) -{ - void *base; - - base = (void *)__get_free_pages(gfp_flags, get_order(size)); - if (!base) - return NULL; - memset(base, 0, size); - *dmaaddr = ssb_dma_map_single(ring->dev->dev, base, size, - DMA_TO_DEVICE); - if (ssb_dma_mapping_error(ring->dev->dev, *dmaaddr)) { - free_pages((unsigned long)base, get_order(size)); - return NULL; - } - - return base; -} - -static void * b43_get_and_map_ringmem(struct b43_dmaring *ring, - dma_addr_t *dmaaddr, size_t size) -{ - void *base; - - base = __b43_get_and_map_ringmem(ring, dmaaddr, size, - GFP_KERNEL); - if (!base) { - b43err(ring->dev->wl, "Failed to allocate or map pages " - "for DMA ringmemory\n"); - return NULL; - } - if (!b43_dma_address_ok(ring, *dmaaddr, size)) { - /* The memory does not fit our device constraints. - * Retry with GFP_DMA set to get lower memory. */ - b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size); - base = __b43_get_and_map_ringmem(ring, dmaaddr, size, - GFP_KERNEL | GFP_DMA); - if (!base) { - b43err(ring->dev->wl, "Failed to allocate or map pages " - "in the GFP_DMA region for DMA ringmemory\n"); - return NULL; - } - if (!b43_dma_address_ok(ring, *dmaaddr, size)) { - b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size); - b43err(ring->dev->wl, "Failed to allocate DMA " - "ringmemory that fits device constraints\n"); - return NULL; - } - } - /* We expect the memory to be 4k aligned, at least. */ - if (B43_WARN_ON(!is_4k_aligned(*dmaaddr))) { - b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size); - return NULL; - } - - return base; -} - static int alloc_ringmemory(struct b43_dmaring *ring) { - unsigned int required; - void *base; - dma_addr_t dmaaddr; + gfp_t flags = GFP_KERNEL; - /* There are several requirements to the descriptor ring memory: - * - The memory region needs to fit the address constraints for the - * device (same as for frame buffers). - * - For 30/32bit DMA devices, the descriptor ring must be 4k aligned. - * - For 64bit DMA devices, the descriptor ring must be 8k aligned. + /* The specs call for 4K buffers for 30- and 32-bit DMA with 4K + * alignment and 8K buffers for 64-bit DMA with 8K alignment. Testing + * has shown that 4K is sufficient for the latter as long as the buffer + * does not cross an 8K boundary. + * + * For unknown reasons - possibly a hardware error - the BCM4311 rev + * 02, which uses 64-bit DMA, needs the ring buffer in very low memory, + * which accounts for the GFP_DMA flag below. + * + * The flags here must match the flags in free_ringmemory below! */ - if (ring->type == B43_DMA_64BIT) - required = ring->nr_slots * sizeof(struct b43_dmadesc64); - else - required = ring->nr_slots * sizeof(struct b43_dmadesc32); - if (B43_WARN_ON(required > 0x1000)) + flags |= GFP_DMA; + ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev, + B43_DMA_RINGMEMSIZE, + &(ring->dmabase), flags); + if (!ring->descbase) { + b43err(ring->dev->wl, "DMA ringmemory allocation failed\n"); return -ENOMEM; - - ring->alloc_descsize = 0x1000; - base = b43_get_and_map_ringmem(ring, &dmaaddr, ring->alloc_descsize); - if (!base) - return -ENOMEM; - ring->alloc_descbase = base; - ring->alloc_dmabase = dmaaddr; - - if ((ring->type != B43_DMA_64BIT) || is_8k_aligned(dmaaddr)) { - /* We're on <=32bit DMA, or we already got 8k aligned memory. - * That's all we need, so we're fine. */ - ring->descbase = base; - ring->dmabase = dmaaddr; - return 0; } - b43_unmap_and_free_ringmem(ring, base, dmaaddr, ring->alloc_descsize); - - /* Ok, we failed at the 8k alignment requirement. - * Try to force-align the memory region now. */ - ring->alloc_descsize = 0x2000; - base = b43_get_and_map_ringmem(ring, &dmaaddr, ring->alloc_descsize); - if (!base) - return -ENOMEM; - ring->alloc_descbase = base; - ring->alloc_dmabase = dmaaddr; - - if (is_8k_aligned(dmaaddr)) { - /* We're already 8k aligned. That Ok, too. */ - ring->descbase = base; - ring->dmabase = dmaaddr; - return 0; - } - /* Force-align it to 8k */ - ring->descbase = (void *)((u8 *)base + 0x1000); - ring->dmabase = dmaaddr + 0x1000; - B43_WARN_ON(!is_8k_aligned(ring->dmabase)); + memset(ring->descbase, 0, B43_DMA_RINGMEMSIZE); return 0; } static void free_ringmemory(struct b43_dmaring *ring) { - b43_unmap_and_free_ringmem(ring, ring->alloc_descbase, - ring->alloc_dmabase, ring->alloc_descsize); + gfp_t flags = GFP_KERNEL; + + if (ring->type == B43_DMA_64BIT) + flags |= GFP_DMA; + + ssb_dma_free_consistent(ring->dev->dev, B43_DMA_RINGMEMSIZE, + ring->descbase, ring->dmabase, flags); } /* Reset the RX DMA channel */ @@ -646,14 +530,29 @@ static bool b43_dma_mapping_error(struct b43_dmaring *ring, if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr))) return 1; - if (!b43_dma_address_ok(ring, addr, buffersize)) { - /* We can't support this address. Unmap it again. */ - unmap_descbuffer(ring, addr, buffersize, dma_to_device); - return 1; + switch (ring->type) { + case B43_DMA_30BIT: + if ((u64)addr + buffersize > (1ULL << 30)) + goto address_error; + break; + case B43_DMA_32BIT: + if ((u64)addr + buffersize > (1ULL << 32)) + goto address_error; + break; + case B43_DMA_64BIT: + /* Currently we can't have addresses beyond + * 64bit in the kernel. */ + break; } /* The address is OK. */ return 0; + +address_error: + /* We can't support this address. Unmap it again. */ + unmap_descbuffer(ring, addr, buffersize, dma_to_device); + + return 1; } static bool b43_rx_buffer_is_poisoned(struct b43_dmaring *ring, struct sk_buff *skb) @@ -715,9 +614,6 @@ static int setup_rx_descbuffer(struct b43_dmaring *ring, meta->dmaaddr = dmaaddr; ring->ops->fill_descriptor(ring, desc, dmaaddr, ring->rx_buffersize, 0, 0, 0); - ssb_dma_sync_single_for_device(ring->dev->dev, - ring->alloc_dmabase, - ring->alloc_descsize, DMA_TO_DEVICE); return 0; } @@ -1354,9 +1250,6 @@ static int dma_tx_fragment(struct b43_dmaring *ring, } /* Now transfer the whole frame. */ wmb(); - ssb_dma_sync_single_for_device(ring->dev->dev, - ring->alloc_dmabase, - ring->alloc_descsize, DMA_TO_DEVICE); ops->poke_tx(ring, next_slot(ring, slot)); return 0; diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h index e607b392314c..f7ab37c4cdbc 100644 --- a/drivers/net/wireless/b43/dma.h +++ b/drivers/net/wireless/b43/dma.h @@ -157,6 +157,7 @@ struct b43_dmadesc_generic { } __attribute__ ((__packed__)); /* Misc DMA constants */ +#define B43_DMA_RINGMEMSIZE PAGE_SIZE #define B43_DMA0_RX_FRAMEOFFSET 30 /* DMA engine tuning knobs */ @@ -246,12 +247,6 @@ struct b43_dmaring { /* The QOS priority assigned to this ring. Only used for TX rings. * This is the mac80211 "queue" value. */ u8 queue_prio; - /* Pointers and size of the originally allocated and mapped memory - * region for the descriptor ring. */ - void *alloc_descbase; - dma_addr_t alloc_dmabase; - unsigned int alloc_descsize; - /* Pointer to our wireless device. */ struct b43_wldev *dev; #ifdef CONFIG_B43_DEBUG /* Maximum number of used slots. */ From 98ea3f50bcc97689cc0e1fa3b6733f03aeb8fef4 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Tue, 29 Dec 2009 21:51:15 +0100 Subject: [PATCH 0225/1626] reiserfs: Fix remaining in-reclaim-fs <-> reclaim-fs-on locking inversion Commit 500f5a0bf5f0624dae34307010e240ec090e4cde (reiserfs: Fix possible recursive lock) fixed a vmalloc under reiserfs lock that triggered a lockdep warning because of a IN-FS-RECLAIM <-> RECLAIM-FS-ON locking dependency inversion. But this patch has ommitted another vmalloc call in the same path that allocates the journal. Relax the lock for this one too. Reported-by: Alexander Beregalov Signed-off-by: Frederic Weisbecker Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/journal.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index 2f8a7e7b8dab..a059879667b1 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -2758,11 +2758,18 @@ int journal_init(struct super_block *sb, const char *j_dev_name, struct reiserfs_journal *journal; struct reiserfs_journal_list *jl; char b[BDEVNAME_SIZE]; + int ret; + /* + * Unlock here to avoid various RECLAIM-FS-ON <-> IN-RECLAIM-FS + * dependency inversion warnings. + */ + reiserfs_write_unlock(sb); journal = SB_JOURNAL(sb) = vmalloc(sizeof(struct reiserfs_journal)); if (!journal) { reiserfs_warning(sb, "journal-1256", "unable to get memory for journal structure"); + reiserfs_write_lock(sb); return 1; } memset(journal, 0, sizeof(struct reiserfs_journal)); @@ -2771,10 +2778,12 @@ int journal_init(struct super_block *sb, const char *j_dev_name, INIT_LIST_HEAD(&journal->j_working_list); INIT_LIST_HEAD(&journal->j_journal_list); journal->j_persistent_trans = 0; - if (reiserfs_allocate_list_bitmaps(sb, - journal->j_list_bitmap, - reiserfs_bmap_count(sb))) + ret = reiserfs_allocate_list_bitmaps(sb, journal->j_list_bitmap, + reiserfs_bmap_count(sb)); + reiserfs_write_lock(sb); + if (ret) goto free_and_return; + allocate_bitmap_nodes(sb); /* reserved for journal area support */ From cbd1998377504df005302ac90d49db72a48552a6 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 30 Dec 2009 12:08:49 +1100 Subject: [PATCH 0226/1626] md: Fix unfortunate interaction with evms evms configures md arrays by: open device send ioctl close device for each different ioctl needed. Since 2.6.29, the device can disappear after the 'close' unless a significant configuration has happened to the device. The change made by "SET_ARRAY_INFO" can too minor to stop the device from disappearing, but important enough that losing the change is bad. So: make sure SET_ARRAY_INFO sets mddev->ctime, and keep the device active as long as ctime is non-zero (it gets zeroed with lots of other things when the array is stopped). This is suitable for -stable kernels since 2.6.29. Signed-off-by: NeilBrown Cc: stable@kernel.org --- drivers/md/md.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index f4f5f82f9f53..7862231a0750 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -386,7 +386,9 @@ static void mddev_put(mddev_t *mddev) if (!atomic_dec_and_lock(&mddev->active, &all_mddevs_lock)) return; if (!mddev->raid_disks && list_empty(&mddev->disks) && - !mddev->hold_active) { + mddev->ctime == 0 && !mddev->hold_active) { + /* Array is not configured at all, and not held active, + * so destroy it */ list_del(&mddev->all_mddevs); if (mddev->gendisk) { /* we did a probe so need to clean up. @@ -5262,6 +5264,10 @@ static int set_array_info(mddev_t * mddev, mdu_array_info_t *info) mddev->minor_version = info->minor_version; mddev->patch_version = info->patch_version; mddev->persistent = !info->not_persistent; + /* ensure mddev_put doesn't delete this now that there + * is some minimal configuration. + */ + mddev->ctime = get_seconds(); return 0; } mddev->major_version = MD_MAJOR_VERSION; From 0f9552b5dc4fe10da37fa3f4a4ca185d90fa41c9 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 30 Dec 2009 12:08:50 +1100 Subject: [PATCH 0227/1626] md: fix small irregularity with start_ro module parameter The start_ro modules parameter can be used to force arrays to be started in 'auto-readonly' in which they are read-only until the first write. This ensures that no resync/recovery happens until something else writes to the device. This is important for resume-from-disk off an md array. However if an array is started 'readonly' (by writing 'readonly' to the 'array_state' sysfs attribute) we want it to be really 'readonly', not 'auto-readonly'. So strengthen the condition to only set auto-readonly if the array is not already read-only. Signed-off-by: NeilBrown --- drivers/md/md.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 7862231a0750..d2aff7209070 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4357,7 +4357,7 @@ static int do_md_run(mddev_t * mddev) mddev->barriers_work = 1; mddev->ok_start_degraded = start_dirty_degraded; - if (start_readonly) + if (start_readonly && mddev->ro == 0) mddev->ro = 2; /* read-only, but switch on first write */ err = mddev->pers->run(mddev); From a2d79c324ac0c26ae9995a312a7731067a7f01fc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 21 Dec 2009 18:18:36 -0700 Subject: [PATCH 0228/1626] md: make recovery started by do_md_run() visible via sync_action By default md_do_sync() will perform recovery if no other actions are specified. However, action_show() relies on MD_RECOVERY_RECOVER to be set otherwise it returns 'idle'. So, add a missing set MD_RECOVERY_RECOVER when starting recovery. Signed-off-by: Dan Williams Signed-off-by: NeilBrown --- drivers/md/md.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/md.c b/drivers/md/md.c index d2aff7209070..fd55f2a555b1 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4436,6 +4436,7 @@ static int do_md_run(mddev_t * mddev) if (spares && mddev->pers->sync_request) { mddev->recovery = 0; set_bit(MD_RECOVERY_RUNNING, &mddev->recovery); + set_bit(MD_RECOVERY_RECOVER, &mddev->recovery); mddev->sync_thread = md_register_thread(md_do_sync, mddev, "resync"); From 7fb9dadc91948ddd16d1d32e414b5e71ec63b97b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 30 Dec 2009 15:19:08 +1100 Subject: [PATCH 0229/1626] md: remove unnecessary code from do_md_run Since commit dfc7064500061677720fa26352963c772d3ebe6b, ->hot_remove_disks has not removed non-failed devices from an array until recovery is no longer possible. So the code in do_md_run to get around the fact that md_check_recovery (which calls ->hot_remove_disks) would remove partially-in-sync devices is no longer needed. So remove it. Signed-off-by: NeilBrown --- drivers/md/md.c | 28 ---------------------------- 1 file changed, 28 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index fd55f2a555b1..c4bdf0601757 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4421,34 +4421,6 @@ static int do_md_run(mddev_t * mddev) set_capacity(disk, mddev->array_sectors); - /* If there is a partially-recovered drive we need to - * start recovery here. If we leave it to md_check_recovery, - * it will remove the drives and not do the right thing - */ - if (mddev->degraded && !mddev->sync_thread) { - int spares = 0; - list_for_each_entry(rdev, &mddev->disks, same_set) - if (rdev->raid_disk >= 0 && - !test_bit(In_sync, &rdev->flags) && - !test_bit(Faulty, &rdev->flags)) - /* complete an interrupted recovery */ - spares++; - if (spares && mddev->pers->sync_request) { - mddev->recovery = 0; - set_bit(MD_RECOVERY_RUNNING, &mddev->recovery); - set_bit(MD_RECOVERY_RECOVER, &mddev->recovery); - mddev->sync_thread = md_register_thread(md_do_sync, - mddev, - "resync"); - if (!mddev->sync_thread) { - printk(KERN_ERR "%s: could not start resync" - " thread...\n", - mdname(mddev)); - /* leave the spares where they are, it shouldn't hurt */ - mddev->recovery = 0; - } - } - } md_wakeup_thread(mddev->thread); md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */ From 404e4b43fdd6daa7b4a9f81bc7e4358281d763fa Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 30 Dec 2009 15:25:23 +1100 Subject: [PATCH 0230/1626] md: allow a resync that is waiting for other resync to complete, to be aborted. If two arrays share a device, then they will not both resync at the same time. One will wait for the other to complete. While waiting, the MD_RECOVERY_INTR flag is not checked so a device failure, which would make the resync pointless, does not cause the resync to abort, so the failed device cannot be removed (as it cannot be remove while a resync is happening). So add a test for MD_RECOVERY_INTR. Reported-by: Brett Russ Signed-off-by: NeilBrown --- drivers/md/md.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index c4bdf0601757..dd3dfe42d5a9 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6473,10 +6473,11 @@ void md_do_sync(mddev_t *mddev) mddev->curr_resync = 2; try_again: - if (kthread_should_stop()) { + if (kthread_should_stop()) set_bit(MD_RECOVERY_INTR, &mddev->recovery); + + if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) goto skip; - } for_each_mddev(mddev2, tmp) { if (mddev2 == mddev) continue; From 515f41c33a9d44a964264c9511ad2c869af1fac3 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 29 Dec 2009 23:39:06 -0500 Subject: [PATCH 0231/1626] ext4: Ensure zeroout blocks have no dirty metadata This fixes a bug (found by Curt Wohlgemuth) in which new blocks returned from an extent created with ext4_ext_zeroout() can have dirty metadata still associated with them. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Curt Wohlgemuth Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 8fd6c567964a..91ae46098ea4 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3023,6 +3023,14 @@ out: return err; } +static void unmap_underlying_metadata_blocks(struct block_device *bdev, + sector_t block, int count) +{ + int i; + for (i = 0; i < count; i++) + unmap_underlying_metadata(bdev, block + i); +} + static int ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode, ext4_lblk_t iblock, unsigned int max_blocks, @@ -3098,6 +3106,18 @@ out: } else allocated = ret; set_buffer_new(bh_result); + /* + * if we allocated more blocks than requested + * we need to make sure we unmap the extra block + * allocated. The actual needed block will get + * unmapped later when we find the buffer_head marked + * new. + */ + if (allocated > max_blocks) { + unmap_underlying_metadata_blocks(inode->i_sb->s_bdev, + newblock + max_blocks, + allocated - max_blocks); + } map_out: set_buffer_mapped(bh_result); out1: From 27d0567ab635bc2af11be48f91c8d5a7a2dca2e4 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 17 Dec 2009 08:50:25 +0100 Subject: [PATCH 0232/1626] ACPI: fix ACPI=n allmodconfig build Today's -tip failed to build because commit 9e368fa011d4e0aa050db348d69514900520e40b ("ipmi: add PNP discovery (ACPI namespace via PNPACPI)") from today's upstream kernel causes the following build failure on x86, for CONFIG_ACPI=n && CONFIG_IPMI_SI=y: drivers/char/ipmi/ipmi_si_intf.c:3208: error: 'ipmi_pnp_driver' undeclared (first use in this function) drivers/char/ipmi/ipmi_si_intf.c:3208: error: (Each undeclared identifier is reported only once drivers/char/ipmi/ipmi_si_intf.c:3208: error: for each function it appears in.) drivers/char/ipmi/ipmi_si_intf.c:3334: error: 'ipmi_pnp_driver' undeclared (first use in this function) The reason is that the ipmi_pnp_driver depends on ACPI facilities and is only made available under ACPI - while the registration and unregistration is made dependent on CONFIG_PNP: #ifdef CONFIG_PNP pnp_register_driver(&ipmi_pnp_driver); #endif The solution is to only register this driver under ACPI. (Also, the CONFIG_PNP dependency is not needed because pnp_register_driver() is stubbed out in the !CONFIG_PNP case.) Signed-off-by: Ingo Molnar Acked-by: Myron Stowe Signed-off-by: Len Brown --- drivers/char/ipmi/ipmi_si_intf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 679cd08b80b4..176f1751237f 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -3204,7 +3204,7 @@ static __devinit int init_ipmi_si(void) #ifdef CONFIG_ACPI spmi_find_bmc(); #endif -#ifdef CONFIG_PNP +#ifdef CONFIG_ACPI pnp_register_driver(&ipmi_pnp_driver); #endif @@ -3330,7 +3330,7 @@ static __exit void cleanup_ipmi_si(void) #ifdef CONFIG_PCI pci_unregister_driver(&ipmi_pci_driver); #endif -#ifdef CONFIG_PNP +#ifdef CONFIG_ACPI pnp_unregister_driver(&ipmi_pnp_driver); #endif From 28c32e99bdf5ab838e7179c1aaca5a35a07f2a2b Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 13 Jul 2009 10:33:24 +0800 Subject: [PATCH 0233/1626] ACPI video: no warning message if "acpi_backlight=vendor" is used AML code always sends notifications to ACPI video device, even if we disable the ACPI backlight control by using boot option "acpi_backlight=vendor". In this case we should not print any warning message. http://bugzilla.kernel.org/show_bug.cgi?id=13671#c14 Sigend-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 05dff631591c..3b063a6ac52e 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1979,6 +1979,10 @@ acpi_video_switch_brightness(struct acpi_video_device *device, int event) unsigned long long level_current, level_next; int result = -EINVAL; + /* no warning message if acpi_backlight=vendor is used */ + if (!acpi_video_backlight_support()) + return 0; + if (!device->brightness) goto out; From 88f7a890d74137ab0d126a5d65679cd620f1a289 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 30 Dec 2009 14:22:22 +0800 Subject: [PATCH 0234/1626] ksym_tracer: Fix to make the tracer work ksym tracer doesn't work: # echo tasklist_lock:rw- > ksym_trace_filter -bash: echo: write error: No such device It's because we pass to perf_event_create_kernel_counter() a cpu number which is not present. Signed-off-by: Li Zefan Cc: Steven Rostedt Cc: K.Prasad Cc: Frederic Weisbecker LKML-Reference: <4B3AF19E.1010201@cn.fujitsu.com> Signed-off-by: Ingo Molnar --- kernel/hw_breakpoint.c | 10 +++++++--- kernel/trace/trace_ksym.c | 1 - 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c index 366eedf949c0..48fb0bb6992a 100644 --- a/kernel/hw_breakpoint.c +++ b/kernel/hw_breakpoint.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include @@ -388,7 +389,8 @@ register_wide_hw_breakpoint(struct perf_event_attr *attr, if (!cpu_events) return ERR_PTR(-ENOMEM); - for_each_possible_cpu(cpu) { + get_online_cpus(); + for_each_online_cpu(cpu) { pevent = per_cpu_ptr(cpu_events, cpu); bp = perf_event_create_kernel_counter(attr, cpu, -1, triggered); @@ -399,18 +401,20 @@ register_wide_hw_breakpoint(struct perf_event_attr *attr, goto fail; } } + put_online_cpus(); return cpu_events; fail: - for_each_possible_cpu(cpu) { + for_each_online_cpu(cpu) { pevent = per_cpu_ptr(cpu_events, cpu); if (IS_ERR(*pevent)) break; unregister_hw_breakpoint(*pevent); } + put_online_cpus(); + free_percpu(cpu_events); - /* return the error if any */ return ERR_PTR(err); } EXPORT_SYMBOL_GPL(register_wide_hw_breakpoint); diff --git a/kernel/trace/trace_ksym.c b/kernel/trace/trace_ksym.c index faf37fa4408c..340b6ff193e0 100644 --- a/kernel/trace/trace_ksym.c +++ b/kernel/trace/trace_ksym.c @@ -197,7 +197,6 @@ int process_new_ksym_entry(char *ksymname, int op, unsigned long addr) entry->attr.bp_addr = addr; entry->attr.bp_len = HW_BREAKPOINT_LEN_4; - ret = -EAGAIN; entry->ksym_hbp = register_wide_hw_breakpoint(&entry->attr, ksym_hbp_handler); From 3d13ec2efdb5843ad91e57b60d50b44d922cf063 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 30 Dec 2009 14:23:19 +0800 Subject: [PATCH 0235/1626] ksym_tracer: Fix to allow writing newline to ksym_trace_filter It used to work, but now doesn't: # echo > ksym_filter bash: echo: write error: Invalid argument It's caused by d954fbf0ff6b5fdfb32350e85a2f15d3db976506 ("tracing: Fix wrong usage of strstrip in trace_ksyms"). Signed-off-by: Li Zefan Cc: Steven Rostedt Cc: K.Prasad Cc: Frederic Weisbecker LKML-Reference: <4B3AF1D7.5040400@cn.fujitsu.com> Signed-off-by: Ingo Molnar --- kernel/trace/trace_ksym.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace_ksym.c b/kernel/trace/trace_ksym.c index 340b6ff193e0..160a8d8b37a2 100644 --- a/kernel/trace/trace_ksym.c +++ b/kernel/trace/trace_ksym.c @@ -299,8 +299,8 @@ static ssize_t ksym_trace_filter_write(struct file *file, * 2: echo 0 > ksym_trace_filter * 3: echo "*:---" > ksym_trace_filter */ - if (!buf[0] || !strcmp(buf, "0") || - !strcmp(buf, "*:---")) { + if (!input_string[0] || !strcmp(input_string, "0") || + !strcmp(input_string, "*:---")) { __ksym_trace_reset(); ret = 0; goto out; From e6d9491bf8ba6728cc86aeabbc688d20ec0563b5 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 30 Dec 2009 14:23:40 +0800 Subject: [PATCH 0236/1626] ksym_tracer: Fix race when incrementing count We are under rcu read section but not holding the write lock, so count++ is not atomic. Use atomic64_t instead. Signed-off-by: Li Zefan Cc: Steven Rostedt Cc: K.Prasad Cc: Frederic Weisbecker LKML-Reference: <4B3AF1EC.9010608@cn.fujitsu.com> Signed-off-by: Ingo Molnar --- kernel/trace/trace_ksym.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/kernel/trace/trace_ksym.c b/kernel/trace/trace_ksym.c index 160a8d8b37a2..67d79f709fc5 100644 --- a/kernel/trace/trace_ksym.c +++ b/kernel/trace/trace_ksym.c @@ -32,6 +32,8 @@ #include #include +#include + /* * For now, let us restrict the no. of symbols traced simultaneously to number * of available hardware breakpoint registers. @@ -44,7 +46,7 @@ struct trace_ksym { struct perf_event **ksym_hbp; struct perf_event_attr attr; #ifdef CONFIG_PROFILE_KSYM_TRACER - unsigned long counter; + atomic64_t counter; #endif struct hlist_node ksym_hlist; }; @@ -69,9 +71,8 @@ void ksym_collect_stats(unsigned long hbp_hit_addr) rcu_read_lock(); hlist_for_each_entry_rcu(entry, node, &ksym_filter_head, ksym_hlist) { - if ((entry->attr.bp_addr == hbp_hit_addr) && - (entry->counter <= MAX_UL_INT)) { - entry->counter++; + if (entry->attr.bp_addr == hbp_hit_addr) { + atomic64_inc(&entry->counter); break; } } @@ -501,7 +502,8 @@ static int ksym_tracer_stat_show(struct seq_file *m, void *v) seq_printf(m, " %-36s", fn_name); else seq_printf(m, " %-36s", ""); - seq_printf(m, " %15lu\n", entry->counter); + seq_printf(m, " %15llu\n", + (unsigned long long)atomic64_read(&entry->counter)); return 0; } From 53ab668064edaeef99c0ee22799483d45f4c81f6 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 30 Dec 2009 14:24:03 +0800 Subject: [PATCH 0237/1626] ksym_tracer: Remove trace_stat trace_stat is problematic. Don't use it, use seqfile instead. This fixes a race that reading the stat file is not protected by any lock, which can lead to use after free. Signed-off-by: Li Zefan Cc: Steven Rostedt Cc: K.Prasad Cc: Frederic Weisbecker LKML-Reference: <4B3AF203.40200@cn.fujitsu.com> Signed-off-by: Ingo Molnar --- kernel/trace/trace_ksym.c | 139 +++++++++++++++----------------------- 1 file changed, 56 insertions(+), 83 deletions(-) diff --git a/kernel/trace/trace_ksym.c b/kernel/trace/trace_ksym.c index 67d79f709fc5..94103cdcf9d8 100644 --- a/kernel/trace/trace_ksym.c +++ b/kernel/trace/trace_ksym.c @@ -26,7 +26,6 @@ #include #include "trace_output.h" -#include "trace_stat.h" #include "trace.h" #include @@ -444,103 +443,77 @@ struct tracer ksym_tracer __read_mostly = .print_line = ksym_trace_output }; -__init static int init_ksym_trace(void) -{ - struct dentry *d_tracer; - struct dentry *entry; - - d_tracer = tracing_init_dentry(); - ksym_filter_entry_count = 0; - - entry = debugfs_create_file("ksym_trace_filter", 0644, d_tracer, - NULL, &ksym_tracing_fops); - if (!entry) - pr_warning("Could not create debugfs " - "'ksym_trace_filter' file\n"); - - return register_tracer(&ksym_tracer); -} -device_initcall(init_ksym_trace); - - #ifdef CONFIG_PROFILE_KSYM_TRACER -static int ksym_tracer_stat_headers(struct seq_file *m) +static int ksym_profile_show(struct seq_file *m, void *v) { - seq_puts(m, " Access Type "); - seq_puts(m, " Symbol Counter\n"); - seq_puts(m, " ----------- "); - seq_puts(m, " ------ -------\n"); - return 0; -} - -static int ksym_tracer_stat_show(struct seq_file *m, void *v) -{ - struct hlist_node *stat = v; + struct hlist_node *node; struct trace_ksym *entry; int access_type = 0; char fn_name[KSYM_NAME_LEN]; - entry = hlist_entry(stat, struct trace_ksym, ksym_hlist); + seq_puts(m, " Access Type "); + seq_puts(m, " Symbol Counter\n"); + seq_puts(m, " ----------- "); + seq_puts(m, " ------ -------\n"); - access_type = entry->attr.bp_type; + rcu_read_lock(); + hlist_for_each_entry_rcu(entry, node, &ksym_filter_head, ksym_hlist) { - switch (access_type) { - case HW_BREAKPOINT_R: - seq_puts(m, " R "); - break; - case HW_BREAKPOINT_W: - seq_puts(m, " W "); - break; - case HW_BREAKPOINT_R | HW_BREAKPOINT_W: - seq_puts(m, " RW "); - break; - default: - seq_puts(m, " NA "); + access_type = entry->attr.bp_type; + + switch (access_type) { + case HW_BREAKPOINT_R: + seq_puts(m, " R "); + break; + case HW_BREAKPOINT_W: + seq_puts(m, " W "); + break; + case HW_BREAKPOINT_R | HW_BREAKPOINT_W: + seq_puts(m, " RW "); + break; + default: + seq_puts(m, " NA "); + } + + if (lookup_symbol_name(entry->attr.bp_addr, fn_name) >= 0) + seq_printf(m, " %-36s", fn_name); + else + seq_printf(m, " %-36s", ""); + seq_printf(m, " %15llu\n", + (unsigned long long)atomic64_read(&entry->counter)); } - - if (lookup_symbol_name(entry->attr.bp_addr, fn_name) >= 0) - seq_printf(m, " %-36s", fn_name); - else - seq_printf(m, " %-36s", ""); - seq_printf(m, " %15llu\n", - (unsigned long long)atomic64_read(&entry->counter)); + rcu_read_unlock(); return 0; } -static void *ksym_tracer_stat_start(struct tracer_stat *trace) +static int ksym_profile_open(struct inode *node, struct file *file) { - return ksym_filter_head.first; + return single_open(file, ksym_profile_show, NULL); } -static void * -ksym_tracer_stat_next(void *v, int idx) -{ - struct hlist_node *stat = v; - - return stat->next; -} - -static struct tracer_stat ksym_tracer_stats = { - .name = "ksym_tracer", - .stat_start = ksym_tracer_stat_start, - .stat_next = ksym_tracer_stat_next, - .stat_headers = ksym_tracer_stat_headers, - .stat_show = ksym_tracer_stat_show +static const struct file_operations ksym_profile_fops = { + .open = ksym_profile_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, }; - -__init static int ksym_tracer_stat_init(void) -{ - int ret; - - ret = register_stat_tracer(&ksym_tracer_stats); - if (ret) { - printk(KERN_WARNING "Warning: could not register " - "ksym tracer stats\n"); - return 1; - } - - return 0; -} -fs_initcall(ksym_tracer_stat_init); #endif /* CONFIG_PROFILE_KSYM_TRACER */ + +__init static int init_ksym_trace(void) +{ + struct dentry *d_tracer; + + d_tracer = tracing_init_dentry(); + + trace_create_file("ksym_trace_filter", 0644, d_tracer, + NULL, &ksym_tracing_fops); + +#ifdef CONFIG_PROFILE_KSYM_TRACER + trace_create_file("ksym_profile", 0444, d_tracer, + NULL, &ksym_profile_fops); +#endif + + return register_tracer(&ksym_tracer); +} +device_initcall(init_ksym_trace); From e01ce79b7f6ebc5b57128ee058811aa8f9059319 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 29 Jul 2009 08:53:29 +0800 Subject: [PATCH 0238/1626] ACPI video: correct error-handling code backlight_device_register may return an ERR_PTR value rather than a valid pointer. Problem found by Julia Lawall, properly fixed by Zhang Rui. Signed-off-by: Zhang Rui Acked-by: Julia Lawall Signed-off-by: Len Brown --- drivers/acpi/video.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 05dff631591c..3f685db1a76d 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -999,8 +999,10 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) sprintf(name, "acpi_video%d", count++); device->backlight = backlight_device_register(name, NULL, device, &acpi_backlight_ops); - device->backlight->props.max_brightness = device->brightness->count-3; kfree(name); + if (IS_ERR(device->backlight)) + return; + device->backlight->props.max_brightness = device->brightness->count-3; result = sysfs_create_link(&device->backlight->dev.kobj, &device->dev->dev.kobj, "device"); From c6bde2d9cb75a41cd2b331953784843b4caa89df Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ren=C3=A9=20Bolldorf?= Date: Tue, 29 Dec 2009 23:06:52 -0800 Subject: [PATCH 0239/1626] Input: psmouse - fix compile warning in hgpk module The variable 'dev' is unused in function 'hgpk_register'. Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/hgpk.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index b146237266d8..90be30e93556 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -427,7 +427,6 @@ static void hgpk_recalib_work(struct work_struct *work) static int hgpk_register(struct psmouse *psmouse) { - struct input_dev *dev = psmouse->dev; int err; /* register handlers */ From e97006ae1c87f9630b6f5c4d4384921059d881a8 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Tue, 29 Dec 2009 23:19:31 -0800 Subject: [PATCH 0240/1626] Input: wistron - fix test for CONFIG_PM This should fix the following compile warning: drivers/input/misc/wistron_btns.c:1331:5: warning: "CONFIG_PM" is not defined Signed-off-by: Rakib Mullick Signed-off-by: Dmitry Torokhov --- drivers/input/misc/wistron_btns.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index 38da6ab04384..c0afb71a3a6d 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -1328,7 +1328,7 @@ static struct platform_driver wistron_driver = { .driver = { .name = "wistron-bios", .owner = THIS_MODULE, -#if CONFIG_PM +#ifdef CONFIG_PM .pm = &wistron_pm_ops, #endif }, From 614af4eeb9e89806c001dab50c59e11f40753601 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 29 Dec 2009 23:19:31 -0800 Subject: [PATCH 0241/1626] Input: lifebook - add CONFIG_DMI dependency Lifebook protocol can only be activated if we find known DMI signature. It is useles without DMI. Reported-by: Rakib Mullick Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/Kconfig | 2 +- drivers/input/mouse/lifebook.c | 2 -- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 3feeb3af8abd..c714ca2407f8 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -70,7 +70,7 @@ config MOUSE_PS2_SYNAPTICS config MOUSE_PS2_LIFEBOOK bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EMBEDDED default y - depends on MOUSE_PS2 && X86 + depends on MOUSE_PS2 && X86 && DMI help Say Y here if you have a Fujitsu B-series Lifebook PS/2 TouchScreen connected to your system. diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index 2e6bdfea0165..6d7aa10d10f0 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -44,7 +44,6 @@ static int lifebook_set_6byte_proto(const struct dmi_system_id *d) } static const struct dmi_system_id __initconst lifebook_dmi_table[] = { -#if defined(CONFIG_DMI) && defined(CONFIG_X86) { /* FLORA-ie 55mi */ .matches = { @@ -118,7 +117,6 @@ static const struct dmi_system_id __initconst lifebook_dmi_table[] = { }, }, { } -#endif }; void __init lifebook_module_init(void) From 3f58061d0160424d244e3a72258a1366ab4a8547 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 29 Dec 2009 23:15:51 -0800 Subject: [PATCH 0242/1626] Input: twl4030_keypad - switch to using threaded IRQ Signed-off-by: Felipe Balbi Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/twl4030_keypad.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c index eeaa7acb9cfc..21d6184efa96 100644 --- a/drivers/input/keyboard/twl4030_keypad.c +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -253,14 +253,6 @@ static irqreturn_t do_kp_irq(int irq, void *_kp) u8 reg; int ret; -#ifdef CONFIG_LOCKDEP - /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which - * we don't want and can't tolerate. Although it might be - * friendlier not to borrow this thread context... - */ - local_irq_enable(); -#endif - /* Read & Clear TWL4030 pending interrupt */ ret = twl4030_kpread(kp, ®, KEYP_ISR1, 1); @@ -403,7 +395,8 @@ static int __devinit twl4030_kp_probe(struct platform_device *pdev) * * NOTE: we assume this host is wired to TWL4040 INT1, not INT2 ... */ - error = request_irq(kp->irq, do_kp_irq, 0, pdev->name, kp); + error = request_threaded_irq(kp->irq, NULL, do_kp_irq, + 0, pdev->name, kp); if (error) { dev_info(kp->dbg_dev, "request_irq failed for irq no=%d\n", kp->irq); From 70f944139084c4f297ac90b3af4cb67a8a68b2cf Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 29 Dec 2009 23:16:28 -0800 Subject: [PATCH 0243/1626] Input: twl4030-pwrbutton - switch to using threaded IRQ Signed-off-by: Felipe Balbi Signed-off-by: Dmitry Torokhov --- drivers/input/misc/twl4030-pwrbutton.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c index bdde5c889035..e9069b87fde2 100644 --- a/drivers/input/misc/twl4030-pwrbutton.c +++ b/drivers/input/misc/twl4030-pwrbutton.c @@ -39,18 +39,8 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr) int err; u8 value; -#ifdef CONFIG_LOCKDEP - /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which - * we don't want and can't tolerate since this is a threaded - * IRQ and can sleep due to the i2c reads it has to issue. - * Although it might be friendlier not to borrow this thread - * context... - */ - local_irq_enable(); -#endif - err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &value, - STS_HW_CONDITIONS); + STS_HW_CONDITIONS); if (!err) { input_report_key(pwr, KEY_POWER, value & PWR_PWRON_IRQ); input_sync(pwr); @@ -80,7 +70,7 @@ static int __devinit twl4030_pwrbutton_probe(struct platform_device *pdev) pwr->phys = "twl4030_pwrbutton/input0"; pwr->dev.parent = &pdev->dev; - err = request_irq(irq, powerbutton_irq, + err = request_threaded_irq(irq, NULL, powerbutton_irq, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "twl4030_pwrbutton", pwr); if (err < 0) { From 9bd3f98821a83041e77ee25158b80b535d02d7b4 Mon Sep 17 00:00:00 2001 From: Gui Jianfeng Date: Wed, 30 Dec 2009 08:41:07 +0100 Subject: [PATCH 0244/1626] block: blk_rq_err_sectors cleanup blk_rq_err_sectors() seems useless, get rid of it. Signed-off-by: Gui Jianfeng Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 59b832be3044..9b98173a8184 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -845,7 +845,6 @@ static inline struct request_queue *bdev_get_queue(struct block_device *bdev) * blk_rq_err_bytes() : bytes left till the next error boundary * blk_rq_sectors() : sectors left in the entire request * blk_rq_cur_sectors() : sectors left in the current segment - * blk_rq_err_sectors() : sectors left till the next error boundary */ static inline sector_t blk_rq_pos(const struct request *rq) { @@ -874,11 +873,6 @@ static inline unsigned int blk_rq_cur_sectors(const struct request *rq) return blk_rq_cur_bytes(rq) >> 9; } -static inline unsigned int blk_rq_err_sectors(const struct request *rq) -{ - return blk_rq_err_bytes(rq) >> 9; -} - /* * Request issue related functions. */ From abb631bfe271a9102fb5b05419272b7aec37a974 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 26 Dec 2009 21:51:38 -0500 Subject: [PATCH 0245/1626] dell-wmi: sys_init_module: 'dell_wmi'->init suspiciously returned 21, it should follow 0/-E convention wmi_install_notify_handler() returns an acpi_error, but dell_wmi_init() needs return a -errno style error. Tested-by: Paul Rolland Signed-off-by: Len Brown --- drivers/platform/x86/dell-wmi.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c index 916ccb2b316c..4c7e70299d6b 100644 --- a/drivers/platform/x86/dell-wmi.c +++ b/drivers/platform/x86/dell-wmi.c @@ -323,6 +323,7 @@ static int __init dell_wmi_input_setup(void) static int __init dell_wmi_init(void) { int err; + acpi_status status; if (wmi_has_guid(DELL_EVENT_GUID)) { printk(KERN_WARNING "dell-wmi: No known WMI GUID found\n"); @@ -336,14 +337,14 @@ static int __init dell_wmi_init(void) if (err) return err; - err = wmi_install_notify_handler(DELL_EVENT_GUID, + status = wmi_install_notify_handler(DELL_EVENT_GUID, dell_wmi_notify, NULL); - if (err) { + if (ACPI_FAILURE(status)) { input_unregister_device(dell_wmi_input_dev); printk(KERN_ERR "dell-wmi: Unable to register notify handler - %d\n", - err); - return err; + status); + return -ENODEV; } return 0; From f27725756be8a2c2dc65eaf70d0b52807aa2f113 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 26 Dec 2009 22:04:03 -0500 Subject: [PATCH 0246/1626] ACPI: hp-wmi, msi-wmi: clarify that wmi_install_notify_handler() returns an acpi_status Emphasize that that wmi_install_notify_handler() returns an acpi_status rather than -errno by by testing ACPI_SUCCESS(), ACPI_FAILURE(). No functional change in this patch, but this confusion caused a bug in dell-wmi. Signed-off-by: Len Brown --- drivers/platform/x86/hp-wmi.c | 2 +- drivers/platform/x86/msi-wmi.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 8781d8fa7a57..18bf74136d24 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -581,7 +581,7 @@ static int __init hp_wmi_init(void) if (wmi_has_guid(HPWMI_EVENT_GUID)) { err = wmi_install_notify_handler(HPWMI_EVENT_GUID, hp_wmi_notify, NULL); - if (!err) + if (ACPI_SUCCESS(err)) hp_wmi_input_setup(); } diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c index 7f77f908bb01..f746c677adaa 100644 --- a/drivers/platform/x86/msi-wmi.c +++ b/drivers/platform/x86/msi-wmi.c @@ -236,7 +236,7 @@ static int __init msi_wmi_init(void) } err = wmi_install_notify_handler(MSIWMI_EVENT_GUID, msi_wmi_notify, NULL); - if (err) + if (ACPI_FAILURE(err)) return -EINVAL; err = msi_wmi_input_setup(); From fda11e61ff8a4e3a8ebbd434e46560b67cc0ca9d Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 26 Dec 2009 23:02:24 -0500 Subject: [PATCH 0247/1626] dell-wmi, hp-wmi, msi-wmi: check wmi_get_event_data() return value When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER, the caller must kfree the returned buffer if AE_OK is returned. The callers of wmi_get_event_data() pass ACPI_ALLOCATE_BUFFER, and thus must check its return value before accessing or kfree() on the buffer. Signed-off-by: Len Brown --- drivers/platform/x86/dell-wmi.c | 7 ++++++- drivers/platform/x86/hp-wmi.c | 7 ++++++- drivers/platform/x86/msi-wmi.c | 7 ++++++- 3 files changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c index 4c7e70299d6b..500af8c9ada0 100644 --- a/drivers/platform/x86/dell-wmi.c +++ b/drivers/platform/x86/dell-wmi.c @@ -202,8 +202,13 @@ static void dell_wmi_notify(u32 value, void *context) struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL }; static struct key_entry *key; union acpi_object *obj; + acpi_status status; - wmi_get_event_data(value, &response); + status = wmi_get_event_data(value, &response); + if (status != AE_OK) { + printk(KERN_INFO "dell-wmi: bad event status 0x%x\n", status); + return; + } obj = (union acpi_object *)response.pointer; diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 18bf74136d24..5b648f0c6075 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -338,8 +338,13 @@ static void hp_wmi_notify(u32 value, void *context) static struct key_entry *key; union acpi_object *obj; int eventcode; + acpi_status status; - wmi_get_event_data(value, &response); + status = wmi_get_event_data(value, &response); + if (status != AE_OK) { + printk(KERN_INFO "hp-wmi: bad event status 0x%x\n", status); + return; + } obj = (union acpi_object *)response.pointer; diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c index f746c677adaa..f5f70d4c6913 100644 --- a/drivers/platform/x86/msi-wmi.c +++ b/drivers/platform/x86/msi-wmi.c @@ -149,8 +149,13 @@ static void msi_wmi_notify(u32 value, void *context) static struct key_entry *key; union acpi_object *obj; ktime_t cur; + acpi_status status; - wmi_get_event_data(value, &response); + status = wmi_get_event_data(value, &response); + if (status != AE_OK) { + printk(KERN_INFO DRV_PFX "bad event status 0x%x\n", status); + return; + } obj = (union acpi_object *)response.pointer; From c03b26a5a5597a59b2e247d005d5901430109a8a Mon Sep 17 00:00:00 2001 From: Paul Rolland Date: Wed, 30 Dec 2009 01:07:40 -0500 Subject: [PATCH 0248/1626] wmi: check find_guid() return value to prevent oops Signed-off-by: Paul Rolland Signed-off-by: Len Brown --- drivers/platform/x86/wmi.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index 9f93d6c0f510..cc9ad740bda1 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -492,8 +492,7 @@ wmi_notify_handler handler, void *data) if (!guid || !handler) return AE_BAD_PARAMETER; - find_guid(guid, &block); - if (!block) + if (!find_guid(guid, &block)) return AE_NOT_EXIST; if (block->handler) @@ -521,8 +520,7 @@ acpi_status wmi_remove_notify_handler(const char *guid) if (!guid) return AE_BAD_PARAMETER; - find_guid(guid, &block); - if (!block) + if (!find_guid(guid, &block)) return AE_NOT_EXIST; if (!block->handler) From 7a9568f536754623738110a314ff33286cdbb17d Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 25 Dec 2009 11:49:35 -0800 Subject: [PATCH 0249/1626] dell-wmi - fix condition to abort driver loading From: Dmitry Torokhov The commit 1fdd407f4e3f2ecb453954cbebb6c22491c61853 incorrectly made driver abort loading when known GUID is present when it should have done exactly the opposite. Signed-off-by: Dmitry Torokhov Signed-off-by: Len Brown --- drivers/platform/x86/dell-wmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c index 500af8c9ada0..1b1dddbd5744 100644 --- a/drivers/platform/x86/dell-wmi.c +++ b/drivers/platform/x86/dell-wmi.c @@ -330,7 +330,7 @@ static int __init dell_wmi_init(void) int err; acpi_status status; - if (wmi_has_guid(DELL_EVENT_GUID)) { + if (!wmi_has_guid(DELL_EVENT_GUID)) { printk(KERN_WARNING "dell-wmi: No known WMI GUID found\n"); return -ENODEV; } From d1f9e4970742bb1e22d07b01bd44f9c357d25c42 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Sat, 26 Dec 2009 19:14:59 +0000 Subject: [PATCH 0250/1626] ACPI: WMI: Survive BIOS with duplicate GUIDs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It would appear that in BIOS's with nVidia hooks, the GUID 05901221-D566-11D1-B2F0-00A0C9062910 is duplicated. For now, the simplest solution is to just ignore any duplicate GUIDs. These particular hooks are not currently supported/ used in the kernel, so whoever does that can figure out what the 'right' solution should be (if there's a better one). http://bugzilla.kernel.org/show_bug.cgi?id=14846 Signed-off-by: Carlos Corbacho Reported-by: Larry Finger Reported-by: Oldřich Jedlička Signed-off-by: Len Brown --- drivers/platform/x86/wmi.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index cc9ad740bda1..b104302fea0a 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -714,6 +714,22 @@ static int wmi_class_init(void) return ret; } +static bool guid_already_parsed(const char *guid_string) +{ + struct guid_block *gblock; + struct wmi_block *wblock; + struct list_head *p; + + list_for_each(p, &wmi_blocks.list) { + wblock = list_entry(p, struct wmi_block, list); + gblock = &wblock->gblock; + + if (strncmp(gblock->guid, guid_string, 16) == 0) + return true; + } + return false; +} + /* * Parse the _WDG method for the GUID data blocks */ @@ -723,6 +739,7 @@ static __init acpi_status parse_wdg(acpi_handle handle) union acpi_object *obj; struct guid_block *gblock; struct wmi_block *wblock; + char guid_string[37]; acpi_status status; u32 i, total; @@ -745,6 +762,19 @@ static __init acpi_status parse_wdg(acpi_handle handle) memcpy(gblock, obj->buffer.pointer, obj->buffer.length); for (i = 0; i < total; i++) { + /* + Some WMI devices, like those for nVidia hooks, have a + duplicate GUID. It's not clear what we should do in this + case yet, so for now, we'll just ignore the duplicate. + Anyone who wants to add support for that device can come + up with a better workaround for the mess then. + */ + if (guid_already_parsed(gblock[i].guid) == true) { + wmi_gtoa(gblock[i].guid, guid_string); + printk(KERN_INFO PREFIX "Skipping duplicate GUID %s\n", + guid_string); + continue; + } wblock = kzalloc(sizeof(struct wmi_block), GFP_KERNEL); if (!wblock) return AE_NO_MEMORY; From f405d2c02395a74d3883bd03ded36457aa3697ad Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 28 Dec 2009 18:11:56 +0900 Subject: [PATCH 0251/1626] x86/agp: Fix agp_amd64_init() initialization with CONFIG_GART_IOMMU enabled with CONFIG_GART_IOMMU enabled drivers/char/agp/amd64-agp.c has: #ifndef CONFIG_GART_IOMMU module_init(agp_amd64_init); module_exit(agp_amd64_cleanup); #endif agp_amd64_init() was called via gart_iommu_init with CONFIG_GART_IOMMU=y agp_amd64_init() was called via module_init with CONFIG_GART_IOMMU=n The commit 75f1cdf1dda92cae037ec848ae63690d91913eac changes the x86 dma initialization routine: gart_iommu_init() is called only when GART IOMMU is detected. So when GART IOMMU isn't detected, agp_amd64_init isn't called. Marin Mitov reported this issue: http://marc.info/?l=linux-kernel&m=126192729110083&w=2 With this patch, agp_amd64_init() is always called via module_init (the above ifndef is removed). If agp_amd64_init() is called via gart_iommu_init() earlier, agp_amd64_init() finishes without doing anything (when it is called via module_init). Reported-by: Marin Mitov Tested-by: Marin Mitov Signed-off-by: FUJITA Tomonori Cc: davej@redhat.com LKML-Reference: <20091228181118C.fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar --- drivers/char/agp/amd64-agp.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 2fb2e6cc322a..5aa7a586a7ff 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -725,9 +725,14 @@ static struct pci_driver agp_amd64_pci_driver = { int __init agp_amd64_init(void) { int err = 0; + static int done = 0; if (agp_off) return -EINVAL; + + if (done++) + return agp_bridges_found ? 0 : -ENODEV; + err = pci_register_driver(&agp_amd64_pci_driver); if (err < 0) return err; @@ -771,12 +776,8 @@ static void __exit agp_amd64_cleanup(void) pci_unregister_driver(&agp_amd64_pci_driver); } -/* On AMD64 the PCI driver needs to initialize this driver early - for the IOMMU, so it has to be called via a backdoor. */ -#ifndef CONFIG_GART_IOMMU module_init(agp_amd64_init); module_exit(agp_amd64_cleanup); -#endif MODULE_AUTHOR("Dave Jones , Andi Kleen"); module_param(agp_try_unsupported, bool, 0); From 79b408210885b9f7f0b067b07a09d68f4da3a700 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Tue, 15 Dec 2009 15:39:19 +0800 Subject: [PATCH 0252/1626] tracing/kprobe: Show sign of fields in trace_kprobe format files The format files of trace_kprobe do not show the sign of the fields. The other format files show the field signed type of the fields and this patch makes the trace_kprobe formats consistent with the others. Signed-off-by: Lai Jiangshan LKML-Reference: <4B273D27.5040009@cn.fujitsu.com> Acked-by: Masami Hiramatsu Signed-off-by: Steven Rostedt --- kernel/trace/trace_kprobe.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index 7ecab06547a5..83f1e6ef7063 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -1182,10 +1182,11 @@ static int __probe_event_show_format(struct trace_seq *s, #undef SHOW_FIELD #define SHOW_FIELD(type, item, name) \ do { \ - ret = trace_seq_printf(s, "\tfield: " #type " %s;\t" \ - "offset:%u;\tsize:%u;\n", name, \ + ret = trace_seq_printf(s, "\tfield:" #type " %s;\t" \ + "offset:%u;\tsize:%u;\tsigned:%d;\n", name,\ (unsigned int)offsetof(typeof(field), item),\ - (unsigned int)sizeof(type)); \ + (unsigned int)sizeof(type), \ + is_signed_type(type)); \ if (!ret) \ return 0; \ } while (0) From e96dc9674cb597de4fee757ed005c8465072d13f Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Tue, 15 Dec 2009 15:39:26 +0800 Subject: [PATCH 0253/1626] tracing/syscalls: Fix typo in SYSCALL_DEFINE0 The struct syscall_metadata variable name in SYSCALL_DEFINE0 should be __syscall_meta__##sname instead of __syscall_meta_##sname to match the name that is in SYSCALL_DEFINE1/2/3/4/5/6. This error causes event_enter_##sname->data to point to the wrong location, which causes syscalls which are defined by SYSCALL_DEFINE0() not to be traced. Signed-off-by: Lai Jiangshan LKML-Reference: <4B273D2E.1010807@cn.fujitsu.com> Acked-by: Frederic Weisbecker Signed-off-by: Steven Rostedt --- include/linux/syscalls.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 65793e90d6f6..207466a49f3d 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -195,7 +195,7 @@ struct perf_event_attr; static const struct syscall_metadata __used \ __attribute__((__aligned__(4))) \ __attribute__((section("__syscalls_metadata"))) \ - __syscall_meta_##sname = { \ + __syscall_meta__##sname = { \ .name = "sys_"#sname, \ .nb_args = 0, \ .enter_event = &event_enter__##sname, \ From fb7ae981cb9fe8665b9da97e8734745e030c151d Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Tue, 15 Dec 2009 15:39:38 +0800 Subject: [PATCH 0254/1626] tracing: Fix sign fields in ftrace_define_fields_##call() Add is_signed_type() call to trace_define_field() in ftrace macros. The code previously just passed in 0 (false), disregarding whether or not the field was actually a signed type. Signed-off-by: Lai Jiangshan LKML-Reference: <4B273D3A.6020007@cn.fujitsu.com> Signed-off-by: Steven Rostedt --- include/trace/ftrace.h | 7 ++++--- kernel/trace/trace_export.c | 7 ++++--- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h index 73523151a731..c6fe03e902ca 100644 --- a/include/trace/ftrace.h +++ b/include/trace/ftrace.h @@ -414,7 +414,8 @@ ftrace_raw_output_##call(struct trace_iterator *iter, int flags) \ BUILD_BUG_ON(len > MAX_FILTER_STR_VAL); \ ret = trace_define_field(event_call, #type "[" #len "]", #item, \ offsetof(typeof(field), item), \ - sizeof(field.item), 0, FILTER_OTHER); \ + sizeof(field.item), \ + is_signed_type(type), FILTER_OTHER); \ if (ret) \ return ret; @@ -422,8 +423,8 @@ ftrace_raw_output_##call(struct trace_iterator *iter, int flags) \ #define __dynamic_array(type, item, len) \ ret = trace_define_field(event_call, "__data_loc " #type "[]", #item, \ offsetof(typeof(field), __data_loc_##item), \ - sizeof(field.__data_loc_##item), 0, \ - FILTER_OTHER); + sizeof(field.__data_loc_##item), \ + is_signed_type(type), FILTER_OTHER); #undef __string #define __string(item, src) __dynamic_array(char, item, -1) diff --git a/kernel/trace/trace_export.c b/kernel/trace/trace_export.c index 458e5bfe26d0..d4fa5dc1ee4e 100644 --- a/kernel/trace/trace_export.c +++ b/kernel/trace/trace_export.c @@ -158,7 +158,8 @@ ftrace_format_##name(struct ftrace_event_call *unused, \ BUILD_BUG_ON(len > MAX_FILTER_STR_VAL); \ ret = trace_define_field(event_call, #type "[" #len "]", #item, \ offsetof(typeof(field), item), \ - sizeof(field.item), 0, FILTER_OTHER); \ + sizeof(field.item), \ + is_signed_type(type), FILTER_OTHER); \ if (ret) \ return ret; @@ -168,8 +169,8 @@ ftrace_format_##name(struct ftrace_event_call *unused, \ ret = trace_define_field(event_call, #type "[" #len "]", #item, \ offsetof(typeof(field), \ container.item), \ - sizeof(field.container.item), 0, \ - FILTER_OTHER); \ + sizeof(field.container.item), \ + is_signed_type(type), FILTER_OTHER); \ if (ret) \ return ret; From 44214ab474671e1ab5a860954db413bce52f7e04 Mon Sep 17 00:00:00 2001 From: Rakesh Ranjan Date: Tue, 15 Dec 2009 12:19:19 +0530 Subject: [PATCH 0255/1626] [SCSI] cxgb3i: Fix a login over vlan issue Fix a target login issue, when parent interface is vlan and we are using cxgb3i sepecific private ip address in '/etc/iscsi/ifaces/' iface file. Signed-off-by: Rakesh Ranjan Acked-by: Karen Xie Signed-off-by: James Bottomley --- drivers/scsi/cxgb3i/cxgb3i_offload.c | 34 +++++++++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c index 26ffdcd5a437..15a00e8b7122 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_offload.c +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c @@ -1440,6 +1440,10 @@ void cxgb3i_c3cn_release(struct s3_conn *c3cn) static int is_cxgb3_dev(struct net_device *dev) { struct cxgb3i_sdev_data *cdata; + struct net_device *ndev = dev; + + if (dev->priv_flags & IFF_802_1Q_VLAN) + ndev = vlan_dev_real_dev(dev); write_lock(&cdata_rwlock); list_for_each_entry(cdata, &cdata_list, list) { @@ -1447,7 +1451,7 @@ static int is_cxgb3_dev(struct net_device *dev) int i; for (i = 0; i < ports->nports; i++) - if (dev == ports->lldevs[i]) { + if (ndev == ports->lldevs[i]) { write_unlock(&cdata_rwlock); return 1; } @@ -1566,6 +1570,26 @@ out_err: return -EINVAL; } +/** + * cxgb3i_find_dev - find the interface associated with the given address + * @ipaddr: ip address + */ +static struct net_device * +cxgb3i_find_dev(struct net_device *dev, __be32 ipaddr) +{ + struct flowi fl; + int err; + struct rtable *rt; + + memset(&fl, 0, sizeof(fl)); + fl.nl_u.ip4_u.daddr = ipaddr; + + err = ip_route_output_key(dev ? dev_net(dev) : &init_net, &rt, &fl); + if (!err) + return (&rt->u.dst)->dev; + + return NULL; +} /** * cxgb3i_c3cn_connect - initiates an iscsi tcp connection to a given address @@ -1581,6 +1605,7 @@ int cxgb3i_c3cn_connect(struct net_device *dev, struct s3_conn *c3cn, struct cxgb3i_sdev_data *cdata; struct t3cdev *cdev; __be32 sipv4; + struct net_device *dstdev; int err; c3cn_conn_debug("c3cn 0x%p, dev 0x%p.\n", c3cn, dev); @@ -1591,6 +1616,13 @@ int cxgb3i_c3cn_connect(struct net_device *dev, struct s3_conn *c3cn, c3cn->daddr.sin_port = usin->sin_port; c3cn->daddr.sin_addr.s_addr = usin->sin_addr.s_addr; + dstdev = cxgb3i_find_dev(dev, usin->sin_addr.s_addr); + if (!dstdev || !is_cxgb3_dev(dstdev)) + return -ENETUNREACH; + + if (dstdev->priv_flags & IFF_802_1Q_VLAN) + dev = dstdev; + rt = find_route(dev, c3cn->saddr.sin_addr.s_addr, c3cn->daddr.sin_addr.s_addr, c3cn->saddr.sin_port, From 3064ff39b8121acbd731f64d046218ebf3c2f9c0 Mon Sep 17 00:00:00 2001 From: Michael Hernandez Date: Tue, 15 Dec 2009 21:29:44 -0800 Subject: [PATCH 0256/1626] [SCSI] qla2xxx: Get the link data rate explicitly during device resync. When the hba port gets logged out of the fabric, or other such transitional state when the physical link is still present, the driver doesn't receive a loop up asyn event (where the link data rate currently gets set). Hence send a explicit mailbox command to get the link rate in such conditions. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_gbl.h | 1 + drivers/scsi/qla2xxx/qla_init.c | 2 ++ drivers/scsi/qla2xxx/qla_mbx.c | 33 +++++++++++++++++++++++++++++++++ 3 files changed, 36 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 0b6801fc6389..f61fb8d01330 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -324,6 +324,7 @@ qla2x00_read_ram_word(scsi_qla_host_t *, uint32_t, uint32_t *); extern int qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t); +extern int qla2x00_get_data_rate(scsi_qla_host_t *); /* * Global Function Prototypes in qla_isr.c source file. */ diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 73a793539d45..0f7ea6cc02f6 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -2266,6 +2266,8 @@ qla2x00_configure_loop(scsi_qla_host_t *vha) clear_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); clear_bit(RSCN_UPDATE, &vha->dpc_flags); + qla2x00_get_data_rate(vha); + /* Determine what we need to do */ if (ha->current_topology == ISP_CFG_FL && (test_bit(LOCAL_LOOP_UPDATE, &flags))) { diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 05d595d9a7ef..e91f3d82b2fd 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -3643,3 +3643,36 @@ qla2x00_write_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t data) return rval; } + +int +qla2x00_get_data_rate(scsi_qla_host_t *vha) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + struct qla_hw_data *ha = vha->hw; + + if (!IS_FWI2_CAPABLE(ha)) + return QLA_FUNCTION_FAILED; + + DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, vha->host_no)); + + mcp->mb[0] = MBC_DATA_RATE; + mcp->mb[1] = 0; + mcp->out_mb = MBX_1|MBX_0; + mcp->in_mb = MBX_2|MBX_1|MBX_0; + mcp->tov = MBX_TOV_SECONDS; + mcp->flags = 0; + rval = qla2x00_mailbox_command(vha, mcp); + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(printk(KERN_INFO "%s(%ld): failed=%x mb[0]=%x.\n", + __func__, vha->host_no, rval, mcp->mb[0])); + } else { + DEBUG11(printk(KERN_INFO + "%s(%ld): done.\n", __func__, vha->host_no)); + if (mcp->mb[1] != 0x7) + ha->link_data_rate = mcp->mb[1]; + } + + return rval; +} From 5c66f5d193f68c2a7da0f2ad3535ed30ab14307b Mon Sep 17 00:00:00 2001 From: Anirban Chakraborty Date: Tue, 15 Dec 2009 21:29:45 -0800 Subject: [PATCH 0257/1626] [SCSI] qla2xxx: Fix for a multiqueue bug in CPU affinity mode Hold the hardware lock while do the response completion in work queue threads as it involves sharing a common request queue among multiple threads. Signed-off-by: Anirban Chakraborty Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_mid.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index 2a4c7f4e7b69..b901aa267e7d 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -639,8 +639,10 @@ static void qla_do_work(struct work_struct *work) struct rsp_que *rsp = container_of(work, struct rsp_que, q_work); struct scsi_qla_host *vha; + spin_lock_irq(&rsp->hw->hardware_lock); vha = qla25xx_get_host(rsp); qla24xx_process_response_queue(vha, rsp); + spin_unlock_irq(&rsp->hw->hardware_lock); } /* create response queue */ From 858808019313f217d63ec4ad26686e6fb7b08c19 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 15 Dec 2009 21:29:46 -0800 Subject: [PATCH 0258/1626] [SCSI] qla2xxx: Extend base EEH support in qla2xxx. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 32 +++++++++++-- drivers/scsi/qla2xxx/qla_dbg.h | 9 +++- drivers/scsi/qla2xxx/qla_def.h | 2 + drivers/scsi/qla2xxx/qla_init.c | 20 ++++++++ drivers/scsi/qla2xxx/qla_isr.c | 9 ++-- drivers/scsi/qla2xxx/qla_mbx.c | 31 ++++++++++-- drivers/scsi/qla2xxx/qla_os.c | 83 +++++++++++++++++++++++++++++---- 7 files changed, 165 insertions(+), 21 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 21e2bc4d7401..3a9f5b288aee 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -232,6 +232,9 @@ qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj, if (off) return 0; + if (unlikely(pci_channel_offline(ha->pdev))) + return 0; + if (sscanf(buf, "%d:%x:%x", &val, &start, &size) < 1) return -EINVAL; if (start > ha->optrom_size) @@ -379,6 +382,9 @@ qla2x00_sysfs_read_vpd(struct kobject *kobj, struct device, kobj))); struct qla_hw_data *ha = vha->hw; + if (unlikely(pci_channel_offline(ha->pdev))) + return 0; + if (!capable(CAP_SYS_ADMIN)) return 0; @@ -398,6 +404,9 @@ qla2x00_sysfs_write_vpd(struct kobject *kobj, struct qla_hw_data *ha = vha->hw; uint8_t *tmp_data; + if (unlikely(pci_channel_offline(ha->pdev))) + return 0; + if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->vpd_size || !ha->isp_ops->write_nvram) return 0; @@ -1238,10 +1247,11 @@ qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr, char *buf) { scsi_qla_host_t *vha = shost_priv(class_to_shost(dev)); - int rval; + int rval = QLA_FUNCTION_FAILED; uint16_t state[5]; - rval = qla2x00_get_firmware_state(vha, state); + if (!vha->hw->flags.eeh_busy) + rval = qla2x00_get_firmware_state(vha, state); if (rval != QLA_SUCCESS) memset(state, -1, sizeof(state)); @@ -1452,10 +1462,13 @@ qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport) if (!fcport) return; - if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) + if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags)) + return; + + if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) { qla2x00_abort_all_cmds(fcport->vha, DID_NO_CONNECT << 16); - else - qla2x00_abort_fcport_cmds(fcport); + return; + } /* * Transport has effectively 'deleted' the rport, clear @@ -1475,6 +1488,9 @@ qla2x00_terminate_rport_io(struct fc_rport *rport) if (!fcport) return; + if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags)) + return; + if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) { qla2x00_abort_all_cmds(fcport->vha, DID_NO_CONNECT << 16); return; @@ -1515,6 +1531,12 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost) pfc_host_stat = &ha->fc_host_stat; memset(pfc_host_stat, -1, sizeof(struct fc_host_statistics)); + if (test_bit(UNLOADING, &vha->dpc_flags)) + goto done; + + if (unlikely(pci_channel_offline(ha->pdev))) + goto done; + stats = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &stats_dma); if (stats == NULL) { DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n", diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h index f660dd70b72e..d6d9c86cb058 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.h +++ b/drivers/scsi/qla2xxx/qla_dbg.h @@ -26,7 +26,7 @@ /* #define QL_DEBUG_LEVEL_14 */ /* Output RSCN trace msgs */ /* #define QL_DEBUG_LEVEL_15 */ /* Output NPIV trace msgs */ /* #define QL_DEBUG_LEVEL_16 */ /* Output ISP84XX trace msgs */ -/* #define QL_DEBUG_LEVEL_17 */ /* Output MULTI-Q trace messages */ +/* #define QL_DEBUG_LEVEL_17 */ /* Output EEH trace messages */ /* * Macros use for debugging the driver. @@ -132,6 +132,13 @@ #else #define DEBUG16(x) do {} while (0) #endif + +#if defined(QL_DEBUG_LEVEL_17) +#define DEBUG17(x) do {x;} while (0) +#else +#define DEBUG17(x) do {} while (0) +#endif + /* * Firmware Dump structure definition */ diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 384afda7dbe9..608e675f68c8 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2256,11 +2256,13 @@ struct qla_hw_data { uint32_t disable_serdes :1; uint32_t gpsc_supported :1; uint32_t npiv_supported :1; + uint32_t pci_channel_io_perm_failure :1; uint32_t fce_enabled :1; uint32_t fac_supported :1; uint32_t chip_reset_done :1; uint32_t port0 :1; uint32_t running_gold_fw :1; + uint32_t eeh_busy :1; uint32_t cpu_affinity_enabled :1; uint32_t disable_msix_handshake :1; } flags; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 0f7ea6cc02f6..b4a0eac8f96d 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -269,6 +269,8 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha) vha->flags.online = 0; ha->flags.chip_reset_done = 0; vha->flags.reset_active = 0; + ha->flags.pci_channel_io_perm_failure = 0; + ha->flags.eeh_busy = 0; atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); atomic_set(&vha->loop_state, LOOP_DOWN); vha->device_flags = DFLG_NO_CABLE; @@ -581,6 +583,9 @@ qla2x00_reset_chip(scsi_qla_host_t *vha) uint32_t cnt; uint16_t cmd; + if (unlikely(pci_channel_offline(ha->pdev))) + return; + ha->isp_ops->disable_intrs(ha); spin_lock_irqsave(&ha->hardware_lock, flags); @@ -786,6 +791,12 @@ void qla24xx_reset_chip(scsi_qla_host_t *vha) { struct qla_hw_data *ha = vha->hw; + + if (pci_channel_offline(ha->pdev) && + ha->flags.pci_channel_io_perm_failure) { + return; + } + ha->isp_ops->disable_intrs(ha); /* Perform RISC reset. */ @@ -3562,6 +3573,13 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) /* Requeue all commands in outstanding command list. */ qla2x00_abort_all_cmds(vha, DID_RESET << 16); + if (unlikely(pci_channel_offline(ha->pdev) && + ha->flags.pci_channel_io_perm_failure)) { + clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); + status = 0; + return status; + } + ha->isp_ops->get_flash_version(vha, req->ring); ha->isp_ops->nvram_config(vha); @@ -4460,6 +4478,8 @@ qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha) int ret, retries; struct qla_hw_data *ha = vha->hw; + if (ha->flags.pci_channel_io_perm_failure) + return; if (!IS_FWI2_CAPABLE(ha)) return; if (!ha->fw_major_version) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 1692a883f4de..ffd0efdff40e 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -152,7 +152,7 @@ qla2300_intr_handler(int irq, void *dev_id) for (iter = 50; iter--; ) { stat = RD_REG_DWORD(®->u.isp2300.host_status); if (stat & HSR_RISC_PAUSED) { - if (pci_channel_offline(ha->pdev)) + if (unlikely(pci_channel_offline(ha->pdev))) break; hccr = RD_REG_WORD(®->hccr); @@ -1846,12 +1846,15 @@ qla24xx_intr_handler(int irq, void *dev_id) reg = &ha->iobase->isp24; status = 0; + if (unlikely(pci_channel_offline(ha->pdev))) + return IRQ_HANDLED; + spin_lock_irqsave(&ha->hardware_lock, flags); vha = pci_get_drvdata(ha->pdev); for (iter = 50; iter--; ) { stat = RD_REG_DWORD(®->host_status); if (stat & HSRX_RISC_PAUSED) { - if (pci_channel_offline(ha->pdev)) + if (unlikely(pci_channel_offline(ha->pdev))) break; hccr = RD_REG_DWORD(®->hccr); @@ -1992,7 +1995,7 @@ qla24xx_msix_default(int irq, void *dev_id) do { stat = RD_REG_DWORD(®->host_status); if (stat & HSRX_RISC_PAUSED) { - if (pci_channel_offline(ha->pdev)) + if (unlikely(pci_channel_offline(ha->pdev))) break; hccr = RD_REG_DWORD(®->hccr); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index e91f3d82b2fd..056e4d4505f3 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -56,6 +56,12 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) DEBUG11(printk("%s(%ld): entered.\n", __func__, base_vha->host_no)); + if (ha->flags.pci_channel_io_perm_failure) { + DEBUG(printk("%s(%ld): Perm failure on EEH, timeout MBX " + "Exiting.\n", __func__, vha->host_no)); + return QLA_FUNCTION_TIMEOUT; + } + /* * Wait for active mailbox commands to finish by waiting at most tov * seconds. This is to serialize actual issuing of mailbox cmds during @@ -154,10 +160,14 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) /* Check for pending interrupts. */ qla2x00_poll(ha->rsp_q_map[0]); - if (command != MBC_LOAD_RISC_RAM_EXTENDED && - !ha->flags.mbox_int) + if (!ha->flags.mbox_int && + !(IS_QLA2200(ha) && + command == MBC_LOAD_RISC_RAM_EXTENDED)) msleep(10); } /* while */ + DEBUG17(qla_printk(KERN_WARNING, ha, + "Waited %d sec\n", + (uint)((jiffies - (wait_time - (mcp->tov * HZ)))/HZ))); } /* Check whether we timed out */ @@ -227,7 +237,8 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) if (rval == QLA_FUNCTION_TIMEOUT && mcp->mb[0] != MBC_GEN_SYSTEM_ERROR) { - if (!io_lock_on || (mcp->flags & IOCTL_CMD)) { + if (!io_lock_on || (mcp->flags & IOCTL_CMD) || + ha->flags.eeh_busy) { /* not in dpc. schedule it for dpc to take over. */ DEBUG(printk("%s(%ld): timeout schedule " "isp_abort_needed.\n", __func__, @@ -237,7 +248,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) base_vha->host_no)); qla_printk(KERN_WARNING, ha, "Mailbox command timeout occurred. Scheduling ISP " - "abort.\n"); + "abort. eeh_busy: 0x%x\n", ha->flags.eeh_busy); set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags); qla2xxx_wake_dpc(vha); } else if (!abort_active) { @@ -2530,6 +2541,9 @@ qla2x00_enable_eft_trace(scsi_qla_host_t *vha, dma_addr_t eft_dma, if (!IS_FWI2_CAPABLE(vha->hw)) return QLA_FUNCTION_FAILED; + if (unlikely(pci_channel_offline(vha->hw->pdev))) + return QLA_FUNCTION_FAILED; + DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); mcp->mb[0] = MBC_TRACE_CONTROL; @@ -2565,6 +2579,9 @@ qla2x00_disable_eft_trace(scsi_qla_host_t *vha) if (!IS_FWI2_CAPABLE(vha->hw)) return QLA_FUNCTION_FAILED; + if (unlikely(pci_channel_offline(vha->hw->pdev))) + return QLA_FUNCTION_FAILED; + DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); mcp->mb[0] = MBC_TRACE_CONTROL; @@ -2595,6 +2612,9 @@ qla2x00_enable_fce_trace(scsi_qla_host_t *vha, dma_addr_t fce_dma, if (!IS_QLA25XX(vha->hw) && !IS_QLA81XX(vha->hw)) return QLA_FUNCTION_FAILED; + if (unlikely(pci_channel_offline(vha->hw->pdev))) + return QLA_FUNCTION_FAILED; + DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); mcp->mb[0] = MBC_TRACE_CONTROL; @@ -2639,6 +2659,9 @@ qla2x00_disable_fce_trace(scsi_qla_host_t *vha, uint64_t *wr, uint64_t *rd) if (!IS_FWI2_CAPABLE(vha->hw)) return QLA_FUNCTION_FAILED; + if (unlikely(pci_channel_offline(vha->hw->pdev))) + return QLA_FUNCTION_FAILED; + DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); mcp->mb[0] = MBC_TRACE_CONTROL; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 2f873d237325..1ab358210c6a 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -475,11 +475,11 @@ qla2xxx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) srb_t *sp; int rval; - if (unlikely(pci_channel_offline(ha->pdev))) { - if (ha->pdev->error_state == pci_channel_io_frozen) - cmd->result = DID_REQUEUE << 16; - else + if (ha->flags.eeh_busy) { + if (ha->flags.pci_channel_io_perm_failure) cmd->result = DID_NO_CONNECT << 16; + else + cmd->result = DID_REQUEUE << 16; goto qc24_fail_command; } @@ -552,8 +552,15 @@ qla2x00_eh_wait_on_command(struct scsi_cmnd *cmd) #define ABORT_POLLING_PERIOD 1000 #define ABORT_WAIT_ITER ((10 * 1000) / (ABORT_POLLING_PERIOD)) unsigned long wait_iter = ABORT_WAIT_ITER; + scsi_qla_host_t *vha = shost_priv(cmd->device->host); + struct qla_hw_data *ha = vha->hw; int ret = QLA_SUCCESS; + if (unlikely(pci_channel_offline(ha->pdev)) || ha->flags.eeh_busy) { + DEBUG17(qla_printk(KERN_WARNING, ha, "return:eh_wait\n")); + return ret; + } + while (CMD_SP(cmd) && wait_iter--) { msleep(ABORT_POLLING_PERIOD); } @@ -2174,6 +2181,24 @@ qla2x00_free_device(scsi_qla_host_t *vha) { struct qla_hw_data *ha = vha->hw; + qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16); + + /* Disable timer */ + if (vha->timer_active) + qla2x00_stop_timer(vha); + + /* Kill the kernel thread for this host */ + if (ha->dpc_thread) { + struct task_struct *t = ha->dpc_thread; + + /* + * qla2xxx_wake_dpc checks for ->dpc_thread + * so we need to zero it out. + */ + ha->dpc_thread = NULL; + kthread_stop(t); + } + qla25xx_delete_queues(vha); if (ha->flags.fce_enabled) @@ -2185,6 +2210,8 @@ qla2x00_free_device(scsi_qla_host_t *vha) /* Stop currently executing firmware. */ qla2x00_try_to_stop_firmware(vha); + vha->flags.online = 0; + /* turn-off interrupts on the card */ if (ha->interrupts_on) ha->isp_ops->disable_intrs(ha); @@ -2859,6 +2886,13 @@ qla2x00_do_dpc(void *data) if (!base_vha->flags.init_done) continue; + if (ha->flags.eeh_busy) { + DEBUG17(qla_printk(KERN_WARNING, ha, + "qla2x00_do_dpc: dpc_flags: %lx\n", + base_vha->dpc_flags)); + continue; + } + DEBUG3(printk("scsi(%ld): DPC handler\n", base_vha->host_no)); ha->dpc_active = 1; @@ -3049,8 +3083,13 @@ qla2x00_timer(scsi_qla_host_t *vha) int index; srb_t *sp; int t; + uint16_t w; struct qla_hw_data *ha = vha->hw; struct req_que *req; + + /* Hardware read to raise pending EEH errors during mailbox waits. */ + if (!pci_channel_offline(ha->pdev)) + pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w); /* * Ports - Port down timer. * @@ -3252,16 +3291,23 @@ qla2x00_release_firmware(void) static pci_ers_result_t qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { - scsi_qla_host_t *base_vha = pci_get_drvdata(pdev); + scsi_qla_host_t *vha = pci_get_drvdata(pdev); + struct qla_hw_data *ha = vha->hw; + + DEBUG2(qla_printk(KERN_WARNING, ha, "error_detected:state %x\n", + state)); switch (state) { case pci_channel_io_normal: + ha->flags.eeh_busy = 0; return PCI_ERS_RESULT_CAN_RECOVER; case pci_channel_io_frozen: + ha->flags.eeh_busy = 1; pci_disable_device(pdev); return PCI_ERS_RESULT_NEED_RESET; case pci_channel_io_perm_failure: - qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16); + ha->flags.pci_channel_io_perm_failure = 1; + qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16); return PCI_ERS_RESULT_DISCONNECT; } return PCI_ERS_RESULT_NEED_RESET; @@ -3312,6 +3358,8 @@ qla2xxx_pci_slot_reset(struct pci_dev *pdev) struct qla_hw_data *ha = base_vha->hw; int rc; + DEBUG17(qla_printk(KERN_WARNING, ha, "slot_reset\n")); + if (ha->mem_only) rc = pci_enable_device_mem(pdev); else @@ -3320,19 +3368,33 @@ qla2xxx_pci_slot_reset(struct pci_dev *pdev) if (rc) { qla_printk(KERN_WARNING, ha, "Can't re-enable PCI device after reset.\n"); - return ret; } - pci_set_master(pdev); if (ha->isp_ops->pci_config(base_vha)) return ret; +#ifdef QL_DEBUG_LEVEL_17 + { + uint8_t b; + uint32_t i; + + printk("slot_reset_1: "); + for (i = 0; i < 256; i++) { + pci_read_config_byte(ha->pdev, i, &b); + printk("%s%02x", (i%16) ? " " : "\n", b); + } + printk("\n"); + } +#endif set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); if (qla2x00_abort_isp(base_vha) == QLA_SUCCESS) ret = PCI_ERS_RESULT_RECOVERED; clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); + DEBUG17(qla_printk(KERN_WARNING, ha, + "slot_reset-return:ret=%x\n", ret)); + return ret; } @@ -3343,12 +3405,17 @@ qla2xxx_pci_resume(struct pci_dev *pdev) struct qla_hw_data *ha = base_vha->hw; int ret; + DEBUG17(qla_printk(KERN_WARNING, ha, "pci_resume\n")); + ret = qla2x00_wait_for_hba_online(base_vha); if (ret != QLA_SUCCESS) { qla_printk(KERN_ERR, ha, "the device failed to resume I/O " "from slot/link_reset"); } + + ha->flags.eeh_busy = 0; + pci_cleanup_aer_uncorrect_error_status(pdev); } From ca79cf664806d833e28c8c05824b2361f59b8bc8 Mon Sep 17 00:00:00 2001 From: Duane Grigsby Date: Tue, 15 Dec 2009 21:29:47 -0800 Subject: [PATCH 0259/1626] [SCSI] qla2xxx: Added to EEH support. Added fundamental reset and pci save state. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 1ab358210c6a..209f50e788a1 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1817,6 +1817,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Set ISP-type information. */ qla2x00_set_isp_flags(ha); + + /* Set EEH reset type to fundamental if required by hba */ + if ( IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha)) { + pdev->needs_freset = 1; + pci_save_state(pdev); + } + /* Configure PCI I/O space */ ret = qla2x00_iospace_config(ha); if (ret) From 3b9c212a5cbb1e13ced92639ce83f7a48b8b2331 Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Tue, 15 Dec 2009 21:29:48 -0800 Subject: [PATCH 0260/1626] [SCSI] qla2xxx: Update version number to 8.03.01-k9. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index c482220f7eed..a65dd95507c6 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.01-k8" +#define QLA2XXX_VERSION "8.03.01-k9" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 From a70757ba9a3719f99760713c3b72134b21016c6e Mon Sep 17 00:00:00 2001 From: Anil Ravindranath Date: Thu, 17 Dec 2009 14:51:53 -0800 Subject: [PATCH 0261/1626] [SCSI] pmcraid: fix to avoid twice scsi_dma_unmap for a command For a particular driver error condition, driver was doing double scsi_dma_unmaps. Driver was calling scsi_dma_unmap in pmcraid_error_handler and return 0. This pmcraid_error_handler is called by pmcraid_io_done which will do scsi_dma_unmap again when it has return 0 from pmcraid_error_handler. Signed-off-by: James Bottomley --- drivers/scsi/pmcraid.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index e7d2688fbeba..b6f1ef954af1 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -2483,14 +2483,12 @@ static int pmcraid_error_handler(struct pmcraid_cmd *cmd) sense_copied = 1; } - if (RES_IS_GSCSI(res->cfg_entry)) { + if (RES_IS_GSCSI(res->cfg_entry)) pmcraid_cancel_all(cmd, sense_copied); - } else if (sense_copied) { + else if (sense_copied) pmcraid_erp_done(cmd); - return 0; - } else { + else pmcraid_request_sense(cmd); - } return 1; From 0637c6f4135f592f094207c7c21e7c0fc5557834 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 30 Dec 2009 14:20:45 -0500 Subject: [PATCH 0262/1626] ext4: Patch up how we claim metadata blocks for quota purposes As reported in Kernel Bugzilla #14936, commit d21cd8f triggered a BUG in the function ext4_da_update_reserve_space() found in fs/ext4/inode.c. The root cause of this BUG() was caused by the fact that ext4_calc_metadata_amount() can severely over-estimate how many metadata blocks will be needed, especially when using direct block-mapped files. In addition, it can also badly *under* estimate how much space is needed, since ext4_calc_metadata_amount() assumes that the blocks are contiguous, and this is not always true. If the application is writing blocks to a sparse file, the number of metadata blocks necessary can be severly underestimated by the functions ext4_da_reserve_space(), ext4_da_update_reserve_space() and ext4_da_release_space(). This was the cause of the dq_claim_space reports found on kerneloops.org. Unfortunately, doing this right means that we need to massively over-estimate the amount of free space needed. So in some cases we may need to force the inode to be written to disk asynchronously in to avoid spurious quota failures. http://bugzilla.kernel.org/show_bug.cgi?id=14936 Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 157 ++++++++++++++++++++++++++---------------------- 1 file changed, 84 insertions(+), 73 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 3e3b45458ef8..84eeb8f515a3 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1043,43 +1043,47 @@ static int ext4_calc_metadata_amount(struct inode *inode, int blocks) return ext4_indirect_calc_metadata_amount(inode, blocks); } +/* + * Called with i_data_sem down, which is important since we can call + * ext4_discard_preallocations() from here. + */ static void ext4_da_update_reserve_space(struct inode *inode, int used) { struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); - int total, mdb, mdb_free, mdb_claim = 0; + struct ext4_inode_info *ei = EXT4_I(inode); + int mdb_free = 0; - spin_lock(&EXT4_I(inode)->i_block_reservation_lock); - /* recalculate the number of metablocks still need to be reserved */ - total = EXT4_I(inode)->i_reserved_data_blocks - used; - mdb = ext4_calc_metadata_amount(inode, total); - - /* figure out how many metablocks to release */ - BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); - mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb; - - if (mdb_free) { - /* Account for allocated meta_blocks */ - mdb_claim = EXT4_I(inode)->i_allocated_meta_blocks; - BUG_ON(mdb_free < mdb_claim); - mdb_free -= mdb_claim; - - /* update fs dirty blocks counter */ - percpu_counter_sub(&sbi->s_dirtyblocks_counter, mdb_free); - EXT4_I(inode)->i_allocated_meta_blocks = 0; - EXT4_I(inode)->i_reserved_meta_blocks = mdb; + spin_lock(&ei->i_block_reservation_lock); + if (unlikely(used > ei->i_reserved_data_blocks)) { + ext4_msg(inode->i_sb, KERN_NOTICE, "%s: ino %lu, used %d " + "with only %d reserved data blocks\n", + __func__, inode->i_ino, used, + ei->i_reserved_data_blocks); + WARN_ON(1); + used = ei->i_reserved_data_blocks; } - /* update per-inode reservations */ - BUG_ON(used > EXT4_I(inode)->i_reserved_data_blocks); - EXT4_I(inode)->i_reserved_data_blocks -= used; - percpu_counter_sub(&sbi->s_dirtyblocks_counter, used + mdb_claim); + /* Update per-inode reservations */ + ei->i_reserved_data_blocks -= used; + used += ei->i_allocated_meta_blocks; + ei->i_reserved_meta_blocks -= ei->i_allocated_meta_blocks; + ei->i_allocated_meta_blocks = 0; + percpu_counter_sub(&sbi->s_dirtyblocks_counter, used); + + if (ei->i_reserved_data_blocks == 0) { + /* + * We can release all of the reserved metadata blocks + * only when we have written all of the delayed + * allocation blocks. + */ + mdb_free = ei->i_allocated_meta_blocks; + percpu_counter_sub(&sbi->s_dirtyblocks_counter, mdb_free); + ei->i_allocated_meta_blocks = 0; + } spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); - vfs_dq_claim_block(inode, used + mdb_claim); - - /* - * free those over-booking quota for metadata blocks - */ + /* Update quota subsystem */ + vfs_dq_claim_block(inode, used); if (mdb_free) vfs_dq_release_reservation_block(inode, mdb_free); @@ -1088,7 +1092,8 @@ static void ext4_da_update_reserve_space(struct inode *inode, int used) * there aren't any writers on the inode, we can discard the * inode's preallocations. */ - if (!total && (atomic_read(&inode->i_writecount) == 0)) + if ((ei->i_reserved_data_blocks == 0) && + (atomic_read(&inode->i_writecount) == 0)) ext4_discard_preallocations(inode); } @@ -1801,7 +1806,8 @@ static int ext4_da_reserve_space(struct inode *inode, int nrblocks) { int retries = 0; struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); - unsigned long md_needed, mdblocks, total = 0; + struct ext4_inode_info *ei = EXT4_I(inode); + unsigned long md_needed, md_reserved, total = 0; /* * recalculate the amount of metadata blocks to reserve @@ -1809,35 +1815,44 @@ static int ext4_da_reserve_space(struct inode *inode, int nrblocks) * worse case is one extent per block */ repeat: - spin_lock(&EXT4_I(inode)->i_block_reservation_lock); - total = EXT4_I(inode)->i_reserved_data_blocks + nrblocks; - mdblocks = ext4_calc_metadata_amount(inode, total); - BUG_ON(mdblocks < EXT4_I(inode)->i_reserved_meta_blocks); - - md_needed = mdblocks - EXT4_I(inode)->i_reserved_meta_blocks; + spin_lock(&ei->i_block_reservation_lock); + md_reserved = ei->i_reserved_meta_blocks; + md_needed = ext4_calc_metadata_amount(inode, nrblocks); total = md_needed + nrblocks; - spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); + spin_unlock(&ei->i_block_reservation_lock); /* * Make quota reservation here to prevent quota overflow * later. Real quota accounting is done at pages writeout * time. */ - if (vfs_dq_reserve_block(inode, total)) + if (vfs_dq_reserve_block(inode, total)) { + /* + * We tend to badly over-estimate the amount of + * metadata blocks which are needed, so if we have + * reserved any metadata blocks, try to force out the + * inode and see if we have any better luck. + */ + if (md_reserved && retries++ <= 3) + goto retry; return -EDQUOT; + } if (ext4_claim_free_blocks(sbi, total)) { vfs_dq_release_reservation_block(inode, total); if (ext4_should_retry_alloc(inode->i_sb, &retries)) { + retry: + if (md_reserved) + write_inode_now(inode, (retries == 3)); yield(); goto repeat; } return -ENOSPC; } - spin_lock(&EXT4_I(inode)->i_block_reservation_lock); - EXT4_I(inode)->i_reserved_data_blocks += nrblocks; - EXT4_I(inode)->i_reserved_meta_blocks += md_needed; - spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); + spin_lock(&ei->i_block_reservation_lock); + ei->i_reserved_data_blocks += nrblocks; + ei->i_reserved_meta_blocks += md_needed; + spin_unlock(&ei->i_block_reservation_lock); return 0; /* success */ } @@ -1845,49 +1860,45 @@ repeat: static void ext4_da_release_space(struct inode *inode, int to_free) { struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); - int total, mdb, mdb_free, release; + struct ext4_inode_info *ei = EXT4_I(inode); if (!to_free) return; /* Nothing to release, exit */ spin_lock(&EXT4_I(inode)->i_block_reservation_lock); - if (!EXT4_I(inode)->i_reserved_data_blocks) { + if (unlikely(to_free > ei->i_reserved_data_blocks)) { /* - * if there is no reserved blocks, but we try to free some - * then the counter is messed up somewhere. - * but since this function is called from invalidate - * page, it's harmless to return without any action + * if there aren't enough reserved blocks, then the + * counter is messed up somewhere. Since this + * function is called from invalidate page, it's + * harmless to return without any action. */ - printk(KERN_INFO "ext4 delalloc try to release %d reserved " - "blocks for inode %lu, but there is no reserved " - "data blocks\n", to_free, inode->i_ino); - spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); - return; + ext4_msg(inode->i_sb, KERN_NOTICE, "ext4_da_release_space: " + "ino %lu, to_free %d with only %d reserved " + "data blocks\n", inode->i_ino, to_free, + ei->i_reserved_data_blocks); + WARN_ON(1); + to_free = ei->i_reserved_data_blocks; + } + ei->i_reserved_data_blocks -= to_free; + + if (ei->i_reserved_data_blocks == 0) { + /* + * We can release all of the reserved metadata blocks + * only when we have written all of the delayed + * allocation blocks. + */ + to_free += ei->i_allocated_meta_blocks; + ei->i_allocated_meta_blocks = 0; } - /* recalculate the number of metablocks still need to be reserved */ - total = EXT4_I(inode)->i_reserved_data_blocks - to_free; - mdb = ext4_calc_metadata_amount(inode, total); + /* update fs dirty blocks counter */ + percpu_counter_sub(&sbi->s_dirtyblocks_counter, to_free); - /* figure out how many metablocks to release */ - BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); - mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb; - - release = to_free + mdb_free; - - /* update fs dirty blocks counter for truncate case */ - percpu_counter_sub(&sbi->s_dirtyblocks_counter, release); - - /* update per-inode reservations */ - BUG_ON(to_free > EXT4_I(inode)->i_reserved_data_blocks); - EXT4_I(inode)->i_reserved_data_blocks -= to_free; - - BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); - EXT4_I(inode)->i_reserved_meta_blocks = mdb; spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); - vfs_dq_release_reservation_block(inode, release); + vfs_dq_release_reservation_block(inode, to_free); } static void ext4_da_page_release_reservation(struct page *page, From c2b27ef672992a206e5b221b8676972dd840ffa5 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 30 Dec 2009 12:18:24 -0800 Subject: [PATCH 0263/1626] Input: iforce - wait for command completion when closing the device We need to wait for the command to disable FF effects to complete before continuing with closing the device. Tested-by: Johannes Ebke Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/iforce/iforce-main.c | 3 +++ drivers/input/joystick/iforce/iforce-usb.c | 1 + 2 files changed, 4 insertions(+) diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c index acc3a9efb00f..b1edd778639c 100644 --- a/drivers/input/joystick/iforce/iforce-main.c +++ b/drivers/input/joystick/iforce/iforce-main.c @@ -228,6 +228,9 @@ static void iforce_close(struct input_dev *dev) /* Disable force feedback playback */ iforce_send_packet(iforce, FF_CMD_ENABLE, "\001"); + /* Wait for the command to complete */ + wait_event_interruptible(iforce->wait, + !test_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags)); } switch (iforce->bus) { diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index c0ad88369442..b41303d3ec54 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -109,6 +109,7 @@ static void iforce_usb_out(struct urb *urb) struct iforce *iforce = urb->context; if (urb->status) { + clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags); dbg("urb->status %d, exiting", urb->status); return; } From 75c85a0bc13367aabb36e8208d4e373b022b43b3 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 30 Dec 2009 13:21:06 -0600 Subject: [PATCH 0264/1626] libsrp: fix compile failure commit 45465487897a1c6d508b14b904dc5777f7ec7e04 ("kfifo: move struct kfifo in place") caused a compile failure in ibmvscsitgt.c because it changed a pointer to kfifo in the libsrp.h structure to a direct inclusion without including . The fix is simple, just add the include, but how did this happen? This change, introduced at -rc2, hardly looks like a bug fix, and it clearly didn't go through linux-next, which would have picked up this compile failure (it only occurs on ppc because of the ibm virtual scsi target). [ Apparently all of -mm wasn't in linux-next.. ] Signed-off-by: James Bottomley Signed-off-by: Linus Torvalds --- include/scsi/libsrp.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/scsi/libsrp.h b/include/scsi/libsrp.h index 07e3adde21d9..f4105c91af53 100644 --- a/include/scsi/libsrp.h +++ b/include/scsi/libsrp.h @@ -2,6 +2,7 @@ #define __LIBSRP_H__ #include +#include #include #include #include From 66f0dc481e5b802ab363b979fc1753410c7d82b5 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 30 Dec 2009 20:17:34 +0000 Subject: [PATCH 0265/1626] mm: move sys_mmap_pgoff from util.c Move sys_mmap_pgoff() from mm/util.c to mm/mmap.c and mm/nommu.c, where we'd expect to find such code: especially now that it contains the MAP_HUGETLB handling. Revert mm/util.c to how it was in 2.6.32. This patch just ignores MAP_HUGETLB in the nommu case, as in 2.6.32, whereas 2.6.33-rc2 reported -ENOSYS. Perhaps validate_mmap_request() should reject it with -EINVAL? Add that later if necessary. Signed-off-by: Hugh Dickins Signed-off-by: Linus Torvalds --- mm/mmap.c | 40 ++++++++++++++++++++++++++++++++++++++++ mm/nommu.c | 25 +++++++++++++++++++++++++ mm/util.c | 44 -------------------------------------------- 3 files changed, 65 insertions(+), 44 deletions(-) diff --git a/mm/mmap.c b/mm/mmap.c index d9c77b2dbe9d..ee2298936fe6 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1043,6 +1043,46 @@ unsigned long do_mmap_pgoff(struct file *file, unsigned long addr, } EXPORT_SYMBOL(do_mmap_pgoff); +SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, + unsigned long, fd, unsigned long, pgoff) +{ + struct file *file = NULL; + unsigned long retval = -EBADF; + + if (!(flags & MAP_ANONYMOUS)) { + if (unlikely(flags & MAP_HUGETLB)) + return -EINVAL; + file = fget(fd); + if (!file) + goto out; + } else if (flags & MAP_HUGETLB) { + struct user_struct *user = NULL; + /* + * VM_NORESERVE is used because the reservations will be + * taken when vm_ops->mmap() is called + * A dummy user value is used because we are not locking + * memory so no accounting is necessary + */ + len = ALIGN(len, huge_page_size(&default_hstate)); + file = hugetlb_file_setup(HUGETLB_ANON_FILE, len, VM_NORESERVE, + &user, HUGETLB_ANONHUGE_INODE); + if (IS_ERR(file)) + return PTR_ERR(file); + } + + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + + down_write(¤t->mm->mmap_sem); + retval = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); + up_write(¤t->mm->mmap_sem); + + if (file) + fput(file); +out: + return retval; +} + /* * Some shared mappigns will want the pages marked read-only * to track write events. If so, we'll downgrade vm_page_prot diff --git a/mm/nommu.c b/mm/nommu.c index 8687973462bb..6f9248f89bde 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1398,6 +1398,31 @@ error_getting_region: } EXPORT_SYMBOL(do_mmap_pgoff); +SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, + unsigned long, fd, unsigned long, pgoff) +{ + struct file *file = NULL; + unsigned long retval = -EBADF; + + if (!(flags & MAP_ANONYMOUS)) { + file = fget(fd); + if (!file) + goto out; + } + + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + + down_write(¤t->mm->mmap_sem); + retval = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); + up_write(¤t->mm->mmap_sem); + + if (file) + fput(file); +out: + return retval; +} + /* * split a vma into two pieces at address 'addr', a new vma is allocated either * for the first part or the tail. diff --git a/mm/util.c b/mm/util.c index b377ce430803..7c35ad95f927 100644 --- a/mm/util.c +++ b/mm/util.c @@ -4,10 +4,6 @@ #include #include #include -#include -#include -#include -#include #include #define CREATE_TRACE_POINTS @@ -272,46 +268,6 @@ int __attribute__((weak)) get_user_pages_fast(unsigned long start, } EXPORT_SYMBOL_GPL(get_user_pages_fast); -SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len, - unsigned long, prot, unsigned long, flags, - unsigned long, fd, unsigned long, pgoff) -{ - struct file * file = NULL; - unsigned long retval = -EBADF; - - if (!(flags & MAP_ANONYMOUS)) { - if (unlikely(flags & MAP_HUGETLB)) - return -EINVAL; - file = fget(fd); - if (!file) - goto out; - } else if (flags & MAP_HUGETLB) { - struct user_struct *user = NULL; - /* - * VM_NORESERVE is used because the reservations will be - * taken when vm_ops->mmap() is called - * A dummy user value is used because we are not locking - * memory so no accounting is necessary - */ - len = ALIGN(len, huge_page_size(&default_hstate)); - file = hugetlb_file_setup(HUGETLB_ANON_FILE, len, VM_NORESERVE, - &user, HUGETLB_ANONHUGE_INODE); - if (IS_ERR(file)) - return PTR_ERR(file); - } - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - retval = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return retval; -} - /* Tracepoints definitions. */ EXPORT_TRACEPOINT_SYMBOL(kmalloc); EXPORT_TRACEPOINT_SYMBOL(kmem_cache_alloc); From 9a7262a0563da6b91019156abf487bcdf1a41526 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Mon, 28 Dec 2009 13:28:25 -0800 Subject: [PATCH 0266/1626] x86_64 SGI UV: Fix writes to led registers on remote uv hubs. The wrong address was being used to write the SCIR led regs on remote hubs. Also, there was an inconsistency between how BIOS and the kernel indexed these regs. Standardize on using the lower 6 bits of the APIC ID as the index. This patch fixes the problem of writing to an errant address to a cpu # >= 64. Signed-off-by: Mike Travis Reviewed-by: Jack Steiner Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- arch/x86/include/asm/uv/uv_hub.h | 20 +++++++++++++++++++- arch/x86/kernel/apic/x2apic_uv_x.c | 12 ++++++------ 2 files changed, 25 insertions(+), 7 deletions(-) diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index 811bfabc80b7..bcdb708993d2 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -338,6 +338,18 @@ static inline unsigned long uv_global_gru_mmr_address(int pnode, unsigned long o return UV_GLOBAL_GRU_MMR_BASE | offset | (pnode << uv_hub_info->m_val); } +static inline void uv_write_global_mmr8(int pnode, unsigned long offset, + unsigned char val) +{ + writeb(val, uv_global_mmr64_address(pnode, offset)); +} + +static inline unsigned char uv_read_global_mmr8(int pnode, + unsigned long offset) +{ + return readb(uv_global_mmr64_address(pnode, offset)); +} + /* * Access hub local MMRs. Faster than using global space but only local MMRs * are accessible. @@ -457,11 +469,17 @@ static inline void uv_set_scir_bits(unsigned char value) } } +static inline unsigned long uv_scir_offset(int apicid) +{ + return SCIR_LOCAL_MMR_BASE | (apicid & 0x3f); +} + static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value) { if (uv_cpu_hub_info(cpu)->scir.state != value) { + uv_write_global_mmr8(uv_cpu_to_pnode(cpu), + uv_cpu_hub_info(cpu)->scir.offset, value); uv_cpu_hub_info(cpu)->scir.state = value; - uv_write_local_mmr8(uv_cpu_hub_info(cpu)->scir.offset, value); } } diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index d56b0efb2057..5f92494dab61 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -629,8 +629,10 @@ void __init uv_system_init(void) uv_rtc_init(); for_each_present_cpu(cpu) { + int apicid = per_cpu(x86_cpu_to_apicid, cpu); + nid = cpu_to_node(cpu); - pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu)); + pnode = uv_apicid_to_pnode(apicid); blade = boot_pnode_to_blade(pnode); lcpu = uv_blade_info[blade].nr_possible_cpus; uv_blade_info[blade].nr_possible_cpus++; @@ -651,15 +653,13 @@ void __init uv_system_init(void) uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra; uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base; uv_cpu_hub_info(cpu)->coherency_domain_number = sn_coherency_id; - uv_cpu_hub_info(cpu)->scir.offset = SCIR_LOCAL_MMR_BASE + lcpu; + uv_cpu_hub_info(cpu)->scir.offset = uv_scir_offset(apicid); uv_node_to_blade[nid] = blade; uv_cpu_to_blade[cpu] = blade; max_pnode = max(pnode, max_pnode); - printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, " - "lcpu %d, blade %d\n", - cpu, per_cpu(x86_cpu_to_apicid, cpu), pnode, nid, - lcpu, blade); + printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, lcpu %d, blade %d\n", + cpu, apicid, pnode, nid, lcpu, blade); } /* Add blade/pnode info for nodes without cpus */ From 7ea6600148c265b1fd53e521022b1d7aec81d974 Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Tue, 29 Dec 2009 14:50:19 -0600 Subject: [PATCH 0267/1626] generic_permission: MAY_OPEN is not write access generic_permission was refusing CAP_DAC_READ_SEARCH-enabled processes from opening DAC-protected files read-only, because do_filp_open adds MAY_OPEN to the open mask. Ignore MAY_OPEN. After this patch, CAP_DAC_READ_SEARCH is again sufficient to open(fname, O_RDONLY) on a file to which DAC otherwise refuses us read permission. Reported-by: Mike Kazantsev Signed-off-by: Serge E. Hallyn Tested-by: Mike Kazantsev Signed-off-by: Linus Torvalds --- fs/namei.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/namei.c b/fs/namei.c index 68921d9b5302..b55440baf7ab 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -232,6 +232,7 @@ int generic_permission(struct inode *inode, int mask, /* * Searching includes executable on directories, else just read. */ + mask &= MAY_READ | MAY_WRITE | MAY_EXEC; if (mask == MAY_READ || (S_ISDIR(inode->i_mode) && !(mask & MAY_WRITE))) if (capable(CAP_DAC_READ_SEARCH)) return 0; From b58454ec25e80fdb84e294758aeb22dd6d5ee6f9 Mon Sep 17 00:00:00 2001 From: Paul Rolland Date: Wed, 30 Dec 2009 01:19:12 -0500 Subject: [PATCH 0268/1626] wmi: check find_guid() return value to prevent oops Signed-off-by: rol@as2917.net Signed-off-by: Len Brown Signed-off-by: Linus Torvalds --- drivers/platform/x86/wmi.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index 9f93d6c0f510..cc9ad740bda1 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -492,8 +492,7 @@ wmi_notify_handler handler, void *data) if (!guid || !handler) return AE_BAD_PARAMETER; - find_guid(guid, &block); - if (!block) + if (!find_guid(guid, &block)) return AE_NOT_EXIST; if (block->handler) @@ -521,8 +520,7 @@ acpi_status wmi_remove_notify_handler(const char *guid) if (!guid) return AE_BAD_PARAMETER; - find_guid(guid, &block); - if (!block) + if (!find_guid(guid, &block)) return AE_NOT_EXIST; if (!block->handler) From 5ccf73bb4dc7cc9e1f761202a34de5714164724f Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 30 Dec 2009 01:21:42 -0500 Subject: [PATCH 0269/1626] dell-wmi: sys_init_module: 'dell_wmi'->init suspiciously returned 21, it should follow 0/-E convention wmi_install_notify_handler() returns an acpi_error, but dell_wmi_init() needs return a -errno style error. Signed-off-by: Len Brown Tested-by: Paul Rolland Signed-off-by: Linus Torvalds --- drivers/platform/x86/dell-wmi.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c index 916ccb2b316c..4c7e70299d6b 100644 --- a/drivers/platform/x86/dell-wmi.c +++ b/drivers/platform/x86/dell-wmi.c @@ -323,6 +323,7 @@ static int __init dell_wmi_input_setup(void) static int __init dell_wmi_init(void) { int err; + acpi_status status; if (wmi_has_guid(DELL_EVENT_GUID)) { printk(KERN_WARNING "dell-wmi: No known WMI GUID found\n"); @@ -336,14 +337,14 @@ static int __init dell_wmi_init(void) if (err) return err; - err = wmi_install_notify_handler(DELL_EVENT_GUID, + status = wmi_install_notify_handler(DELL_EVENT_GUID, dell_wmi_notify, NULL); - if (err) { + if (ACPI_FAILURE(status)) { input_unregister_device(dell_wmi_input_dev); printk(KERN_ERR "dell-wmi: Unable to register notify handler - %d\n", - err); - return err; + status); + return -ENODEV; } return 0; From ed656d8deccc5669afa33387568e7ec6f14e3e94 Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Sat, 26 Dec 2009 17:58:11 +0100 Subject: [PATCH 0270/1626] kfifo: Fix typo in comment It's DECLARE_KFIFO, not DECLARED_KFIFO. Signed-off-by: Rolf Eike Beer Signed-off-by: Linus Torvalds --- include/linux/kfifo.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index 3d44e9c65a8e..7c6b32a1421c 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -81,7 +81,7 @@ union { \ } /** - * INIT_KFIFO - Initialize a kfifo declared by DECLARED_KFIFO + * INIT_KFIFO - Initialize a kfifo declared by DECLARE_KFIFO * @name: name of the declared kfifo datatype */ #define INIT_KFIFO(name) \ From 06d352f2f1a750b99ba708cb390d95d007ef344c Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 30 Dec 2009 15:21:11 -0700 Subject: [PATCH 0271/1626] powerpc/5200: update defconfigs Signed-off-by: Grant Likely --- arch/powerpc/configs/52xx/cm5200_defconfig | 75 ++++++++++--- arch/powerpc/configs/52xx/lite5200b_defconfig | 90 +++++++++++---- arch/powerpc/configs/52xx/motionpro_defconfig | 79 ++++++++++--- arch/powerpc/configs/52xx/pcm030_defconfig | 83 ++++++++++---- arch/powerpc/configs/52xx/tqm5200_defconfig | 79 ++++++++++--- arch/powerpc/configs/mpc5200_defconfig | 106 ++++++++++++++---- 6 files changed, 413 insertions(+), 99 deletions(-) diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index 0396ce7bffc6..ff9bdb28197d 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc4 -# Thu Oct 15 10:33:22 2009 +# Linux kernel version: 2.6.33-rc2 +# Wed Dec 30 14:45:07 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -58,6 +59,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -85,6 +87,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -166,14 +169,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -189,6 +219,7 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set +# CONFIG_PPC_MPC5200_LPBFIFO is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set @@ -243,6 +274,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -259,8 +291,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -273,6 +303,7 @@ CONFIG_PROC_DEVICETREE=y CONFIG_EXTRA_TARGETS="" CONFIG_PM=y # CONFIG_PM_DEBUG is not set +# CONFIG_HIBERNATION is not set # CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -378,7 +409,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -489,6 +526,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -587,8 +628,8 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -643,6 +684,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600 +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -688,7 +730,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -735,11 +776,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -797,7 +840,6 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1137,6 +1179,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -1180,7 +1223,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index f5c07fd72239..7b3f4d0ed404 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc4 -# Thu Oct 15 10:33:24 2009 +# Linux kernel version: 2.6.33-rc2 +# Wed Dec 30 14:45:09 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -58,6 +59,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -86,6 +88,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -173,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # @@ -196,6 +226,7 @@ CONFIG_PPC_LITE5200=y # CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set +# CONFIG_PPC_MPC5200_LPBFIFO is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set @@ -252,6 +283,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -268,8 +300,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -285,6 +315,7 @@ CONFIG_PM=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set # CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -398,7 +429,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -433,6 +470,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -443,6 +484,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -450,6 +492,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -502,7 +545,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -541,6 +586,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -596,15 +642,16 @@ CONFIG_PATA_MPC52xx=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -726,8 +773,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -741,6 +790,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -778,6 +828,7 @@ CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -835,11 +886,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -849,7 +895,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -884,11 +929,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1129,6 +1176,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -1172,7 +1220,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index 4f77a1bdc8f9..eaae2d469aa0 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc4 -# Thu Oct 15 10:33:22 2009 +# Linux kernel version: 2.6.33-rc2 +# Wed Dec 30 14:45:08 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -58,6 +59,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -85,6 +87,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -166,14 +169,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -189,6 +219,7 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set +# CONFIG_PPC_MPC5200_LPBFIFO is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set @@ -244,6 +275,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -260,8 +292,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -274,6 +304,7 @@ CONFIG_PROC_DEVICETREE=y CONFIG_EXTRA_TARGETS="" CONFIG_PM=y # CONFIG_PM_DEBUG is not set +# CONFIG_HIBERNATION is not set # CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -379,7 +410,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -490,6 +527,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -499,9 +540,11 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -610,8 +653,7 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -657,6 +699,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -700,7 +743,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -745,6 +787,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -805,11 +848,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -881,6 +926,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -902,7 +948,9 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1172,6 +1220,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -1215,7 +1264,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index f9168c1a2fa5..1742c0200b75 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc4 -# Thu Oct 15 10:33:25 2009 +# Linux kernel version: 2.6.33-rc2 +# Wed Dec 30 14:45:10 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -58,6 +59,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -87,6 +89,7 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -172,14 +175,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -195,6 +225,7 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set +# CONFIG_PPC_MPC5200_LPBFIFO is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set @@ -251,6 +282,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -267,8 +299,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -385,7 +415,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -585,15 +621,16 @@ CONFIG_PATA_MPC52xx=m # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -673,8 +710,11 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -697,6 +737,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -734,6 +775,7 @@ CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600 # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -790,11 +832,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -804,7 +841,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -839,11 +875,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -908,7 +946,6 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1011,6 +1048,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_PCF8563=m # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1032,7 +1070,9 @@ CONFIG_RTC_DRV_PCF8563=m # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1243,10 +1283,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y @@ -1269,7 +1310,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 75c835c2ae66..3972438db719 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc4 -# Thu Oct 15 10:33:23 2009 +# Linux kernel version: 2.6.33-rc2 +# Wed Dec 30 14:45:09 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -58,6 +59,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -85,6 +87,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -171,14 +174,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -194,6 +224,7 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_MEDIA5200 is not set CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_MPC5200_GPIO is not set +# CONFIG_PPC_MPC5200_LPBFIFO is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set @@ -249,6 +280,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -265,8 +297,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -279,6 +309,7 @@ CONFIG_PROC_DEVICETREE=y CONFIG_EXTRA_TARGETS="" CONFIG_PM=y # CONFIG_PM_DEBUG is not set +# CONFIG_HIBERNATION is not set # CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -384,7 +415,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -496,6 +533,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -607,8 +648,8 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -663,6 +704,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -708,7 +750,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -753,6 +794,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -818,11 +860,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -880,7 +924,6 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -984,6 +1027,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1005,7 +1049,9 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1275,6 +1321,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -1318,7 +1365,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 523d5fe18c0e..61cf73d0000f 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc4 -# Thu Oct 15 10:33:21 2009 +# Linux kernel version: 2.6.33-rc2 +# Wed Dec 30 15:08:52 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -87,6 +89,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -170,14 +173,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # @@ -193,6 +223,7 @@ CONFIG_PPC_LITE5200=y CONFIG_PPC_MEDIA5200=y CONFIG_PPC_MPC5200_BUGFIX=y CONFIG_PPC_MPC5200_GPIO=y +CONFIG_PPC_MPC5200_LPBFIFO=m # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set @@ -211,6 +242,7 @@ CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_PPC_I8259 is not set CONFIG_PPC_RTAS=y # CONFIG_RTAS_ERROR_LOGGING is not set +# CONFIG_PPC_RTAS_DAEMON is not set CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set # CONFIG_PPC_MPC106 is not set @@ -223,6 +255,7 @@ CONFIG_RTAS_PROC=y CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y +CONFIG_PPC_BESTCOMM_GEN_BD=m CONFIG_SIMPLE_GPIO=y # @@ -253,6 +286,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -269,8 +303,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -286,6 +318,7 @@ CONFIG_PM=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set # CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -399,7 +432,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -530,6 +569,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -541,6 +584,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -548,6 +592,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -600,7 +646,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -639,6 +687,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -694,15 +743,16 @@ CONFIG_PATA_MPC52xx=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y @@ -785,8 +835,11 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -809,6 +862,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -818,6 +872,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -874,6 +929,7 @@ CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -933,11 +989,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -947,7 +998,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -962,7 +1012,10 @@ CONFIG_SPI_MASTER=y # # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +# CONFIG_SPI_MPC52xx is not set CONFIG_SPI_MPC52xx_PSC=m +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -995,6 +1048,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1042,6 +1096,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1083,6 +1138,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1122,6 +1178,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set @@ -1129,6 +1186,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1322,7 +1381,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1440,6 +1498,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1469,7 +1528,9 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1731,6 +1792,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -1774,7 +1836,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # From 3f884bf54dde417e963a0e6effb8f2c01f95abee Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Wed, 30 Dec 2009 15:23:26 -0700 Subject: [PATCH 0272/1626] powerpc: Use scripts/mkuboot.sh instead of 'mkimage' mkuboot.sh provides a basic wrapper for the 'mkimage' utility. Using mkuboot.sh provides clearer error reporting and allows a toolchain to use its own 'mkimage' executable specified by ${CROSS_COMPILE}mkimage. Additionally, this brings PowerPC in line with other architectures which already call mkimage via mkuboot.sh. Signed-off-by: Peter Tyser Signed-off-by: Grant Likely --- arch/powerpc/boot/wrapper | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 390512ae7f86..f4594ed09a20 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -43,6 +43,9 @@ gzip=.gz # cross-compilation prefix CROSS= +# mkimage wrapper script +MKIMAGE=$srctree/scripts/mkuboot.sh + # directory for object and other files used by this script object=arch/powerpc/boot objbin=$object @@ -267,7 +270,7 @@ membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'` case "$platform" in uboot) rm -f "$ofile" - mkimage -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \ + ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \ $uboot_version -d "$vmz" "$ofile" if [ -z "$cacheit" ]; then rm -f "$vmz" @@ -327,7 +330,7 @@ coff) ;; cuboot*) gzip -f -9 "$ofile" - mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \ + ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \ $uboot_version -d "$ofile".gz "$ofile" ;; treeboot*) From d7f0eea9e431e1b8b0742a74db1a9490730b2a25 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 30 Dec 2009 15:36:42 +0800 Subject: [PATCH 0273/1626] ACPI: introduce kernel parameter acpi_sleep=sci_force_enable Introduce kernel parameter acpi_sleep=sci_force_enable some laptop requires SCI_EN being set directly on resume, or else they hung somewhere in the resume code path. We already have a blacklist for these laptops but we still need this option, especially when debugging some suspend/resume problems, in case there are systems that need this workaround and are not yet in the blacklist. Signed-off-by: Zhang Rui Acked-by: Rafael J. Wysocki Signed-off-by: Len Brown --- Documentation/kernel-parameters.txt | 5 ++++- arch/x86/kernel/acpi/sleep.c | 2 ++ drivers/acpi/sleep.c | 29 +++++++++++++++++------------ include/linux/acpi.h | 1 + 4 files changed, 24 insertions(+), 13 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 5ba4d9dff113..736d45602886 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -240,7 +240,7 @@ and is between 256 and 4096 characters. It is defined in the file acpi_sleep= [HW,ACPI] Sleep options Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, - old_ordering, s4_nonvs } + old_ordering, s4_nonvs, sci_force_enable } See Documentation/power/video.txt for information on s3_bios and s3_mode. s3_beep is for debugging; it makes the PC's speaker beep @@ -253,6 +253,9 @@ and is between 256 and 4096 characters. It is defined in the file of _PTS is used by default). s4_nonvs prevents the kernel from saving/restoring the ACPI NVS memory during hibernation. + sci_force_enable causes the kernel to set SCI_EN directly + on resume from S1/S3 (which is against the ACPI spec, + but some broken systems don't work without it). acpi_use_timer_override [HW,ACPI] Use timer override. For some broken Nvidia NF5 boards diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 82e508677b91..f9961034e557 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -162,6 +162,8 @@ static int __init acpi_sleep_setup(char *str) #endif if (strncmp(str, "old_ordering", 12) == 0) acpi_old_suspend_ordering(); + if (strncmp(str, "sci_force_enable", 16) == 0) + acpi_set_sci_en_on_resume(); str = strchr(str, ','); if (str != NULL) str += strspn(str, ", \t"); diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 5f2c379ab7bf..79d33d908b5a 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -80,6 +80,23 @@ static int acpi_sleep_prepare(u32 acpi_state) #ifdef CONFIG_ACPI_SLEEP static u32 acpi_target_sleep_state = ACPI_STATE_S0; +/* + * According to the ACPI specification the BIOS should make sure that ACPI is + * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, + * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI + * on such systems during resume. Unfortunately that doesn't help in + * particularly pathological cases in which SCI_EN has to be set directly on + * resume, although the specification states very clearly that this flag is + * owned by the hardware. The set_sci_en_on_resume variable will be set in such + * cases. + */ +static bool set_sci_en_on_resume; + +void __init acpi_set_sci_en_on_resume(void) +{ + set_sci_en_on_resume = true; +} + /* * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the * user to request that behavior by using the 'acpi_old_suspend_ordering' @@ -170,18 +187,6 @@ static void acpi_pm_end(void) #endif /* CONFIG_ACPI_SLEEP */ #ifdef CONFIG_SUSPEND -/* - * According to the ACPI specification the BIOS should make sure that ACPI is - * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, - * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI - * on such systems during resume. Unfortunately that doesn't help in - * particularly pathological cases in which SCI_EN has to be set directly on - * resume, although the specification states very clearly that this flag is - * owned by the hardware. The set_sci_en_on_resume variable will be set in such - * cases. - */ -static bool set_sci_en_on_resume; - extern void do_suspend_lowlevel(void); static u32 acpi_suspend_states[] = { diff --git a/include/linux/acpi.h b/include/linux/acpi.h index ce945d4845fc..36924255c0d5 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -251,6 +251,7 @@ int acpi_check_mem_region(resource_size_t start, resource_size_t n, void __init acpi_no_s4_hw_signature(void); void __init acpi_old_suspend_ordering(void); void __init acpi_s4_no_nvs(void); +void __init acpi_set_sci_en_on_resume(void); #endif /* CONFIG_PM_SLEEP */ struct acpi_osc_context { From 3b8cb427e9281790f36e847e46cb1d005a50cec0 Mon Sep 17 00:00:00 2001 From: Chen Gong Date: Mon, 14 Dec 2009 09:42:28 +0800 Subject: [PATCH 0274/1626] acpi_pad: fix error checks There are some fixes listed below: 1. When met a bogus BIOS, the return value of cpu number maybe is a negative value so that acpi_pad_pur get an unexpected result. 2. the return value of function acpi_pad_idle_cpus is useless. 3. enhance the process of create_power_saving_task/destroy_power_saving_task 4. Add more error checks when evaluating _PUR object. 5. one typo fix Signed-off-by: Chen Gong Acked-by: Shaohua Li Signed-off-by: Len Brown --- drivers/acpi/acpi_pad.c | 37 ++++++++++++++++++++----------------- 1 file changed, 20 insertions(+), 17 deletions(-) diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c index 0d2cdb86158b..a7bd49f0f01f 100644 --- a/drivers/acpi/acpi_pad.c +++ b/drivers/acpi/acpi_pad.c @@ -207,7 +207,7 @@ static int power_saving_thread(void *data) * the mechanism only works when all CPUs have RT task running, * as if one CPU hasn't RT task, RT task from other CPUs will * borrow CPU time from this CPU and cause RT task use > 95% - * CPU time. To make 'avoid staration' work, takes a nap here. + * CPU time. To make 'avoid starvation' work, takes a nap here. */ if (do_sleep) schedule_timeout_killable(HZ * idle_pct / 100); @@ -221,14 +221,18 @@ static struct task_struct *ps_tsks[NR_CPUS]; static unsigned int ps_tsk_num; static int create_power_saving_task(void) { + int rc = -ENOMEM; + ps_tsks[ps_tsk_num] = kthread_run(power_saving_thread, (void *)(unsigned long)ps_tsk_num, "power_saving/%d", ps_tsk_num); - if (ps_tsks[ps_tsk_num]) { + rc = IS_ERR(ps_tsks[ps_tsk_num]) ? PTR_ERR(ps_tsks[ps_tsk_num]) : 0; + if (!rc) ps_tsk_num++; - return 0; - } - return -EINVAL; + else + ps_tsks[ps_tsk_num] = NULL; + + return rc; } static void destroy_power_saving_task(void) @@ -236,6 +240,7 @@ static void destroy_power_saving_task(void) if (ps_tsk_num > 0) { ps_tsk_num--; kthread_stop(ps_tsks[ps_tsk_num]); + ps_tsks[ps_tsk_num] = NULL; } } @@ -252,7 +257,7 @@ static void set_power_saving_task_num(unsigned int num) } } -static int acpi_pad_idle_cpus(unsigned int num_cpus) +static void acpi_pad_idle_cpus(unsigned int num_cpus) { get_online_cpus(); @@ -260,7 +265,6 @@ static int acpi_pad_idle_cpus(unsigned int num_cpus) set_power_saving_task_num(num_cpus); put_online_cpus(); - return 0; } static uint32_t acpi_pad_idle_cpus_num(void) @@ -368,19 +372,21 @@ static void acpi_pad_remove_sysfs(struct acpi_device *device) static int acpi_pad_pur(acpi_handle handle, int *num_cpus) { struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; - acpi_status status; union acpi_object *package; int rev, num, ret = -EINVAL; - status = acpi_evaluate_object(handle, "_PUR", NULL, &buffer); - if (ACPI_FAILURE(status)) + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_PUR", NULL, &buffer))) return -EINVAL; + + if (!buffer.length || !buffer.pointer) + return -EINVAL; + package = buffer.pointer; if (package->type != ACPI_TYPE_PACKAGE || package->package.count != 2) goto out; rev = package->package.elements[0].integer.value; num = package->package.elements[1].integer.value; - if (rev != 1) + if (rev != 1 || num < 0) goto out; *num_cpus = num; ret = 0; @@ -409,7 +415,7 @@ static void acpi_pad_ost(acpi_handle handle, int stat, static void acpi_pad_handle_notify(acpi_handle handle) { - int num_cpus, ret; + int num_cpus; uint32_t idle_cpus; mutex_lock(&isolated_cpus_lock); @@ -417,12 +423,9 @@ static void acpi_pad_handle_notify(acpi_handle handle) mutex_unlock(&isolated_cpus_lock); return; } - ret = acpi_pad_idle_cpus(num_cpus); + acpi_pad_idle_cpus(num_cpus); idle_cpus = acpi_pad_idle_cpus_num(); - if (!ret) - acpi_pad_ost(handle, 0, idle_cpus); - else - acpi_pad_ost(handle, 1, 0); + acpi_pad_ost(handle, 0, idle_cpus); mutex_unlock(&isolated_cpus_lock); } From c504f8cb68eb0d6cde53ba043daff8cb34586493 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 30 Dec 2009 15:59:23 +0800 Subject: [PATCH 0275/1626] ACPI video: Prune dupe video devices, unless "video.allow_duplicates" Some buggy BIOS exports multiple ACPI video bus devices for the same VGA controller, and multiple backlight control methods as well. This messes up the ACPI video backlight control. http://bugzilla.kernel.org/show_bug.cgi?id=13577 With this patch applied, only the FIRST ACPI video bus device under a PCI device node is bind to ACPI video driver by default. If the first ACPI video bus device doesn't work well, we can use video.allow_duplicates=1 to go back to the old behavior. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 05dff631591c..45e6a29c8177 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -78,6 +78,13 @@ MODULE_LICENSE("GPL"); static int brightness_switch_enabled = 1; module_param(brightness_switch_enabled, bool, 0644); +/* + * By default, we don't allow duplicate ACPI video bus devices + * under the same VGA controller + */ +static int allow_duplicates; +module_param(allow_duplicates, bool, 0644); + static int register_count = 0; static int acpi_video_bus_add(struct acpi_device *device); static int acpi_video_bus_remove(struct acpi_device *device, int type); @@ -2233,11 +2240,47 @@ static int acpi_video_resume(struct acpi_device *device) return AE_OK; } +static acpi_status +acpi_video_bus_match(acpi_handle handle, u32 level, void *context, + void **return_value) +{ + struct acpi_device *device = context; + struct acpi_device *sibling; + int result; + + if (handle == device->handle) + return AE_CTRL_TERMINATE; + + result = acpi_bus_get_device(handle, &sibling); + if (result) + return AE_OK; + + if (!strcmp(acpi_device_name(sibling), ACPI_VIDEO_BUS_NAME)) + return AE_ALREADY_EXISTS; + + return AE_OK; +} + static int acpi_video_bus_add(struct acpi_device *device) { struct acpi_video_bus *video; struct input_dev *input; int error; + acpi_status status; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, + device->parent->handle, 1, + acpi_video_bus_match, NULL, + device, NULL); + if (status == AE_ALREADY_EXISTS) { + printk(KERN_WARNING FW_BUG + "Duplicate ACPI video bus devices for the" + " same VGA controller, please try module " + "parameter \"video.allow_duplicates=1\"" + "if the current driver doesn't work.\n"); + if (!allow_duplicates) + return -ENODEV; + } video = kzalloc(sizeof(struct acpi_video_bus), GFP_KERNEL); if (!video) From 86470e98cc52532006f47a6cb96d3ebe1ba7ad97 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Thu, 3 Dec 2009 21:55:05 +0800 Subject: [PATCH 0276/1626] ocfs2: Handle O_DIRECT when writing to a refcounted cluster. In case of writing to a refcounted cluster with O_DIRECT, we need to fall back to buffer write. And when it is finished, we need to flush the page and the journal as we did for other O_DIRECT writes. This patch fix oss bug 1191. http://oss.oracle.com/bugzilla/show_bug.cgi?id=1191 Signed-off-by: Tao Ma Tested-by: Tristan Ye Signed-off-by: Joel Becker --- fs/ocfs2/file.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 3d30a1c974a8..06ccf6a86d35 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1772,7 +1772,8 @@ static int ocfs2_prepare_inode_for_write(struct dentry *dentry, loff_t *ppos, size_t count, int appending, - int *direct_io) + int *direct_io, + int *has_refcount) { int ret = 0, meta_level = 0; struct inode *inode = dentry->d_inode; @@ -1833,6 +1834,8 @@ static int ocfs2_prepare_inode_for_write(struct dentry *dentry, saved_pos, count, &meta_level); + if (has_refcount) + *has_refcount = 1; } if (ret < 0) { @@ -1856,6 +1859,10 @@ static int ocfs2_prepare_inode_for_write(struct dentry *dentry, break; } + if (has_refcount && *has_refcount == 1) { + *direct_io = 0; + break; + } /* * Allowing concurrent direct writes means * i_size changes wouldn't be synchronized, so @@ -1899,7 +1906,7 @@ static ssize_t ocfs2_file_aio_write(struct kiocb *iocb, loff_t pos) { int ret, direct_io, appending, rw_level, have_alloc_sem = 0; - int can_do_direct; + int can_do_direct, has_refcount = 0; ssize_t written = 0; size_t ocount; /* original count */ size_t count; /* after file limit checks */ @@ -1942,7 +1949,7 @@ relock: can_do_direct = direct_io; ret = ocfs2_prepare_inode_for_write(file->f_path.dentry, ppos, iocb->ki_left, appending, - &can_do_direct); + &can_do_direct, &has_refcount); if (ret < 0) { mlog_errno(ret); goto out; @@ -2006,14 +2013,16 @@ out_dio: /* buffered aio wouldn't have proper lock coverage today */ BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT)); - if ((file->f_flags & O_DSYNC && !direct_io) || IS_SYNC(inode)) { + if ((file->f_flags & O_DSYNC && !direct_io) || IS_SYNC(inode) || + (file->f_flags & O_DIRECT && has_refcount)) { ret = filemap_fdatawrite_range(file->f_mapping, pos, pos + count - 1); if (ret < 0) written = ret; if (!ret && (old_size != i_size_read(inode) || - old_clusters != OCFS2_I(inode)->ip_clusters)) { + old_clusters != OCFS2_I(inode)->ip_clusters || + has_refcount)) { ret = jbd2_journal_force_commit(osb->journal->j_journal); if (ret < 0) written = ret; @@ -2062,7 +2071,7 @@ static int ocfs2_splice_to_file(struct pipe_inode_info *pipe, int ret; ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, &sd->pos, - sd->total_len, 0, NULL); + sd->total_len, 0, NULL, NULL); if (ret < 0) { mlog_errno(ret); return ret; From 541cd3ee00a4fe975b22fac6a3bc846bacef37f7 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 30 Dec 2009 08:23:28 +0000 Subject: [PATCH 0277/1626] phylib: Fix deadlock on resume Sometimes kernel hangs on resume with the following trace: ucc_geth e0102000.ucc: resume INFO: task bash:1764 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. bash D 0fecf43c 0 1764 1763 0x00000000 Call Trace: [cf9a7c10] [c0012868] ret_from_except+0x0/0x14 (unreliable) --- Exception: cf9a7ce0 at __switch_to+0x4c/0x6c LR = 0xcf9a7cc0 [cf9a7cd0] [c0008c14] __switch_to+0x4c/0x6c (unreliable) [cf9a7ce0] [c028bcfc] schedule+0x158/0x260 [cf9a7d10] [c028c720] __mutex_lock_slowpath+0x80/0xd8 [cf9a7d40] [c01cf388] phy_stop+0x20/0x70 [cf9a7d50] [c01d514c] ugeth_resume+0x6c/0x13c [...] Here is why. On suspend: - PM core starts suspending devices, ucc_geth_suspend gets called; - ucc_geth calls phy_stop() on suspend. Note that phy_stop() is mostly asynchronous so it doesn't block ucc_geth's suspend routine, it just sets PHY_HALTED state and disables PHY's interrupts; - Suddenly the state machine gets scheduled, it grabs the phydev->lock mutex and tries to process the PHY_HALTED state, so it calls phydev->adjust_link(phydev->attached_dev). In ucc_geth case adjust_link() calls msleep(), which reschedules the code flow back to PM core, which now finishes suspend and so we end up sleeping with phydev->lock mutex held. On resume: - PM core starts resuming devices (notice that nobody rescheduled the state machine yet, so the mutex is still held), the core calls ucc_geth's resume routine; - ucc_geth_resume restarts the PHY with phy_stop()/phy_start() sequence, and the phy_*() calls are trying to grab the phydev->lock mutex. Here comes the deadlock. This patch fixes the issue by stopping the state machine on suspend and starting it again on resume. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index bd4e8d72dc08..49252d390903 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -303,8 +303,18 @@ static int mdio_bus_suspend(struct device * dev, pm_message_t state) struct phy_driver *phydrv = to_phy_driver(dev->driver); struct phy_device *phydev = to_phy_device(dev); + /* + * We must stop the state machine manually, otherwise it stops out of + * control, possibly with the phydev->lock held. Upon resume, netdev + * may call phy routines that try to grab the same lock, and that may + * lead to a deadlock. + */ + if (phydev->attached_dev) + phy_stop_machine(phydev); + if (!mdio_bus_phy_may_suspend(phydev)) return 0; + return phydrv->suspend(phydev); } @@ -312,10 +322,20 @@ static int mdio_bus_resume(struct device * dev) { struct phy_driver *phydrv = to_phy_driver(dev->driver); struct phy_device *phydev = to_phy_device(dev); + int ret; if (!mdio_bus_phy_may_suspend(phydev)) - return 0; - return phydrv->resume(phydev); + goto no_resume; + + ret = phydrv->resume(phydev); + if (ret < 0) + return ret; + +no_resume: + if (phydev->attached_dev) + phy_start_machine(phydev, NULL); + + return 0; } struct bus_type mdio_bus_type = { From 2f5cb43406d0b29b96248f5328a14a6f6abf8ae6 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 30 Dec 2009 08:23:30 +0000 Subject: [PATCH 0278/1626] phylib: Properly reinitialize PHYs after hibernation Since hibernation assumes power loss, we should fully reinitialize PHYs (including platform fixups), as if PHYs were just attached. This patch factors phy_init_hw() out of phy_attach_direct(), then converts mdio_bus to dev_pm_ops and adds an appropriate restore() callback. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 50 +++++++++++++++++++++++++++++++----- drivers/net/phy/phy_device.c | 30 +++++++++++----------- include/linux/phy.h | 1 + 3 files changed, 59 insertions(+), 22 deletions(-) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 49252d390903..e17b70291bbc 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -264,6 +264,8 @@ static int mdio_bus_match(struct device *dev, struct device_driver *drv) (phydev->phy_id & phydrv->phy_id_mask)); } +#ifdef CONFIG_PM + static bool mdio_bus_phy_may_suspend(struct phy_device *phydev) { struct device_driver *drv = phydev->dev.driver; @@ -295,10 +297,7 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev) return true; } -/* Suspend and resume. Copied from platform_suspend and - * platform_resume - */ -static int mdio_bus_suspend(struct device * dev, pm_message_t state) +static int mdio_bus_suspend(struct device *dev) { struct phy_driver *phydrv = to_phy_driver(dev->driver); struct phy_device *phydev = to_phy_device(dev); @@ -318,7 +317,7 @@ static int mdio_bus_suspend(struct device * dev, pm_message_t state) return phydrv->suspend(phydev); } -static int mdio_bus_resume(struct device * dev) +static int mdio_bus_resume(struct device *dev) { struct phy_driver *phydrv = to_phy_driver(dev->driver); struct phy_device *phydev = to_phy_device(dev); @@ -338,11 +337,48 @@ no_resume: return 0; } +static int mdio_bus_restore(struct device *dev) +{ + struct phy_device *phydev = to_phy_device(dev); + struct net_device *netdev = phydev->attached_dev; + int ret; + + if (!netdev) + return 0; + + ret = phy_init_hw(phydev); + if (ret < 0) + return ret; + + /* The PHY needs to renegotiate. */ + phydev->link = 0; + phydev->state = PHY_UP; + + phy_start_machine(phydev, NULL); + + return 0; +} + +static struct dev_pm_ops mdio_bus_pm_ops = { + .suspend = mdio_bus_suspend, + .resume = mdio_bus_resume, + .freeze = mdio_bus_suspend, + .thaw = mdio_bus_resume, + .restore = mdio_bus_restore, +}; + +#define MDIO_BUS_PM_OPS (&mdio_bus_pm_ops) + +#else + +#define MDIO_BUS_PM_OPS NULL + +#endif /* CONFIG_PM */ + struct bus_type mdio_bus_type = { .name = "mdio_bus", .match = mdio_bus_match, - .suspend = mdio_bus_suspend, - .resume = mdio_bus_resume, + .pm = MDIO_BUS_PM_OPS, }; EXPORT_SYMBOL(mdio_bus_type); diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index b10fedd82143..8212b2b93422 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -378,6 +378,20 @@ void phy_disconnect(struct phy_device *phydev) } EXPORT_SYMBOL(phy_disconnect); +int phy_init_hw(struct phy_device *phydev) +{ + int ret; + + if (!phydev->drv || !phydev->drv->config_init) + return 0; + + ret = phy_scan_fixups(phydev); + if (ret < 0) + return ret; + + return phydev->drv->config_init(phydev); +} + /** * phy_attach_direct - attach a network device to a given PHY device pointer * @dev: network device to attach @@ -425,21 +439,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, /* Do initial configuration here, now that * we have certain key parameters * (dev_flags and interface) */ - if (phydev->drv->config_init) { - int err; - - err = phy_scan_fixups(phydev); - - if (err < 0) - return err; - - err = phydev->drv->config_init(phydev); - - if (err < 0) - return err; - } - - return 0; + return phy_init_hw(phydev); } EXPORT_SYMBOL(phy_attach_direct); diff --git a/include/linux/phy.h b/include/linux/phy.h index b1368b8f6572..7968defd2fa7 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -447,6 +447,7 @@ struct phy_device* get_phy_device(struct mii_bus *bus, int addr); int phy_device_register(struct phy_device *phy); int phy_clear_interrupt(struct phy_device *phydev); int phy_config_interrupt(struct phy_device *phydev, u32 interrupts); +int phy_init_hw(struct phy_device *phydev); int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, u32 flags, phy_interface_t interface); struct phy_device * phy_attach(struct net_device *dev, From 29fb00e047eae927a3f1a0367c0cfed7ad5228ef Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 30 Dec 2009 08:23:32 +0000 Subject: [PATCH 0279/1626] ucc_geth: Fix netdev watchdog triggering on suspend Sometimes ucc_geth fails to suspend with the following trace: ucc_geth e0103000.ucc: suspend ucc_geth e0102000.ucc: suspend NETDEV WATCHDOG: eth0 (ucc_geth): transmit queue 0 timed out ------------[ cut here ]------------ Badness at net/sched/sch_generic.c:255 NIP: c021cb5c LR: c021cb5c CTR: c01ab4b4 [...] NIP [c021cb5c] dev_watchdog+0x298/0x2a8 LR [c021cb5c] dev_watchdog+0x298/0x2a8 Call Trace: [c0389da0] [c021cb5c] dev_watchdog+0x298/0x2a8 (unreliable) [c0389e00] [c0031ed8] run_timer_softirq+0x16c/0x1dc [c0389e50] [c002c638] __do_softirq+0xa4/0x11c [...] This patch fixes the issue by properly detaching the device on suspend, and attaching it back on resume. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 41ad2f3697c7..96bdc0b43889 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -3607,6 +3607,7 @@ static int ucc_geth_suspend(struct of_device *ofdev, pm_message_t state) if (!netif_running(ndev)) return 0; + netif_device_detach(ndev); napi_disable(&ugeth->napi); /* @@ -3665,7 +3666,7 @@ static int ucc_geth_resume(struct of_device *ofdev) phy_start(ugeth->phydev); napi_enable(&ugeth->napi); - netif_start_queue(ndev); + netif_device_attach(ndev); return 0; } From b3319b10523d8dac82b134a05de2a403119abebd Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 30 Dec 2009 08:23:34 +0000 Subject: [PATCH 0280/1626] fsl_pq_mdio: Fix iomem unmapping for non-eTSEC2.0 controllers We use a rather complicated logic to support eTSEC and eTSEC2.0 registers maps in a single driver. Currently, the code tries to unmap 'regs', but for non-eTSEC2.0 controllers 'regs' doesn't point to a mapping start, and this might cause badness on probe failure or module removal: Freescale PowerQUICC MII Bus: probed Trying to vfree() nonexistent vm area (e107f000) ------------[ cut here ]------------ Badness at c00a7754 [verbose debug info unavailable] NIP: c00a7754 LR: c00a7754 CTR: c02231ec [...] NIP [c00a7754] __vunmap+0xec/0xf4 LR [c00a7754] __vunmap+0xec/0xf4 Call Trace: [df827e50] [c00a7754] __vunmap+0xec/0xf4 (unreliable) [df827e70] [c001519c] iounmap+0x44/0x54 [df827e80] [c028b924] fsl_pq_mdio_probe+0x1cc/0x2fc [df827eb0] [c02fb9b4] of_platform_device_probe+0x5c/0x84 [df827ed0] [c0229928] really_probe+0x78/0x1a8 [df827ef0] [c0229b20] __driver_attach+0xa4/0xa8 Fix this by introducing a proper priv structure (finally!), which now holds 'regs' and 'map' fields separately. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/fsl_pq_mdio.c | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c index 25fabb3eedc5..d5160edf2fcf 100644 --- a/drivers/net/fsl_pq_mdio.c +++ b/drivers/net/fsl_pq_mdio.c @@ -46,6 +46,11 @@ #include "gianfar.h" #include "fsl_pq_mdio.h" +struct fsl_pq_mdio_priv { + void __iomem *map; + struct fsl_pq_mdio __iomem *regs; +}; + /* * Write value to the PHY at mii_id at register regnum, * on the bus attached to the local interface, which may be different from the @@ -105,7 +110,9 @@ int fsl_pq_local_mdio_read(struct fsl_pq_mdio __iomem *regs, static struct fsl_pq_mdio __iomem *fsl_pq_mdio_get_regs(struct mii_bus *bus) { - return (void __iomem __force *)bus->priv; + struct fsl_pq_mdio_priv *priv = bus->priv; + + return priv->regs; } /* @@ -266,6 +273,7 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev, { struct device_node *np = ofdev->node; struct device_node *tbi; + struct fsl_pq_mdio_priv *priv; struct fsl_pq_mdio __iomem *regs = NULL; void __iomem *map; u32 __iomem *tbipa; @@ -274,14 +282,19 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev, u64 addr = 0, size = 0; int err = 0; + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + new_bus = mdiobus_alloc(); if (NULL == new_bus) - return -ENOMEM; + goto err_free_priv; new_bus->name = "Freescale PowerQUICC MII Bus", new_bus->read = &fsl_pq_mdio_read, new_bus->write = &fsl_pq_mdio_write, new_bus->reset = &fsl_pq_mdio_reset, + new_bus->priv = priv; fsl_pq_mdio_bus_name(new_bus->id, np); /* Set the PHY base address */ @@ -291,6 +304,7 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev, err = -ENOMEM; goto err_free_bus; } + priv->map = map; if (of_device_is_compatible(np, "fsl,gianfar-mdio") || of_device_is_compatible(np, "fsl,gianfar-tbi") || @@ -298,8 +312,7 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev, of_device_is_compatible(np, "ucc_geth_phy")) map -= offsetof(struct fsl_pq_mdio, miimcfg); regs = map; - - new_bus->priv = (void __force *)regs; + priv->regs = regs; new_bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL); @@ -392,10 +405,11 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev, err_free_irqs: kfree(new_bus->irq); err_unmap_regs: - iounmap(regs); + iounmap(priv->map); err_free_bus: kfree(new_bus); - +err_free_priv: + kfree(priv); return err; } @@ -404,14 +418,16 @@ static int fsl_pq_mdio_remove(struct of_device *ofdev) { struct device *device = &ofdev->dev; struct mii_bus *bus = dev_get_drvdata(device); + struct fsl_pq_mdio_priv *priv = bus->priv; mdiobus_unregister(bus); dev_set_drvdata(device, NULL); - iounmap(fsl_pq_mdio_get_regs(bus)); + iounmap(priv->map); bus->priv = NULL; mdiobus_free(bus); + kfree(priv); return 0; } From 367a8d738542b091228613751af0958ce25bbeb3 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Tue, 29 Dec 2009 15:56:01 +0100 Subject: [PATCH 0281/1626] drbd: Silenced an assert that could triggered after changing write ordering method Immediately after changing the write ordering method, the epoch can already be finished at this point. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_receiver.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index 259c1351b152..a6d266ee7e2a 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -1201,10 +1201,11 @@ static int receive_Barrier(struct drbd_conf *mdev, struct p_header *h) case WO_bdev_flush: case WO_drain_io: - D_ASSERT(rv == FE_STILL_LIVE); - set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags); - drbd_wait_ee_list_empty(mdev, &mdev->active_ee); - rv = drbd_flush_after_epoch(mdev, mdev->current_epoch); + if (rv == FE_STILL_LIVE) { + set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags); + drbd_wait_ee_list_empty(mdev, &mdev->active_ee); + rv = drbd_flush_after_epoch(mdev, mdev->current_epoch); + } if (rv == FE_RECYCLED) return TRUE; From 48b5ba9cc98d676712da29d9931f1c88e5185ff2 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 31 Dec 2009 05:53:02 +0100 Subject: [PATCH 0282/1626] perf: Pass appropriate frame pointer to dump_trace() Pass the frame pointer from the regs of the interrupted path to dump_trace() while processing the stack trace. Currently, dump_trace() takes the current bp and starts the callchain from dump_trace() itself. This is wasteful because we need to walk through the entire NMI/DEBUG stack before retrieving the interrupted point. We can fix that by just using the frame pointer from the captured regs. It points exactly where we want to start. Signed-off-by: Frederic Weisbecker Cc: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras LKML-Reference: <1262235183-5320-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar Cc: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras --- arch/x86/kernel/cpu/perf_event.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index c223b7e895d9..d616c06e99b4 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -2347,7 +2347,7 @@ perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry) callchain_store(entry, PERF_CONTEXT_KERNEL); callchain_store(entry, regs->ip); - dump_trace(NULL, regs, NULL, 0, &backtrace_ops, entry); + dump_trace(NULL, regs, NULL, regs->bp, &backtrace_ops, entry); } /* From 05cbaa2853cdfc255fdd04e65a82bfe9208c4e52 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 30 Dec 2009 16:00:35 +0100 Subject: [PATCH 0283/1626] perf: Fix NULL deref in inheritance code Liming found a NULL deref when a task has a perf context but no counters when it forks. This can occur in two cases, a race during construction where the fork hits after installing the context but before the first counter gets inserted, or more reproducably, a fork after the last counter is closed (which leaves the context around). Reported-by: Wang Liming Signed-off-by: Peter Zijlstra Cc: Frederic Weisbecker Cc: Paul Mackerras CC: LKML-Reference: <1262185684.7135.222.camel@laptop> Signed-off-by: Ingo Molnar --- kernel/perf_event.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 03cc061398d1..58ed1dae5875 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -5148,7 +5148,7 @@ int perf_event_init_task(struct task_struct *child) GFP_KERNEL); if (!child_ctx) { ret = -ENOMEM; - goto exit; + break; } __perf_event_init_context(child_ctx, child); @@ -5164,7 +5164,7 @@ int perf_event_init_task(struct task_struct *child) } } - if (inherited_all) { + if (child_ctx && inherited_all) { /* * Mark the child context as a clone of the parent * context, or of whatever the parent is a clone of. @@ -5184,7 +5184,6 @@ int perf_event_init_task(struct task_struct *child) get_ctx(child_ctx->parent_ctx); } -exit: mutex_unlock(&parent_ctx->mutex); perf_unpin_context(parent_ctx); From a8fe9ea200ea21421ea750423d1d4d4f7ce037cf Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 31 Dec 2009 15:16:23 +0100 Subject: [PATCH 0284/1626] dma-debug: Fix bug causing build warning Stephen Rothwell reported the following build warning: lib/dma-debug.c: In function 'dma_debug_device_change': lib/dma-debug.c:680: warning: 'return' with no value, in function returning non-void Introduced by commit f797d9881b62c2ddb1d2e7bd80d87141949c84aa ("dma-debug: Do not add notifier when dma debugging is disabled"). Return 0 [notify-done] when disabled. (this is standard bus notifier behavior.) Signed-off-by: Shaun Ruffell Signed-off-by: Joerg Roedel Cc: Linus Torvalds Cc: LKML-Reference: <20091231125624.GA14666@liondog.tnic> Signed-off-by: Ingo Molnar --- lib/dma-debug.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/lib/dma-debug.c b/lib/dma-debug.c index 739974460c32..cf906201aecf 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -670,14 +670,13 @@ static int device_dma_allocations(struct device *dev) return count; } -static int dma_debug_device_change(struct notifier_block *nb, - unsigned long action, void *data) +static int dma_debug_device_change(struct notifier_block *nb, unsigned long action, void *data) { struct device *dev = data; int count; if (global_disable) - return; + return 0; switch (action) { case BUS_NOTIFY_UNBOUND_DRIVER: From 0f4bd46ec252887f44f1f065b41867cac8f70dfb Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Tue, 22 Dec 2009 03:15:43 +0000 Subject: [PATCH 0285/1626] kmsg_dump: Dump on crash_kexec as well crash_kexec gets called before kmsg_dump(KMSG_DUMP_OOPS) if panic_on_oops is set, so the kernel log buffer is not stored for this case. This patch adds a KMSG_DUMP_KEXEC dump type which gets called when crash_kexec() is invoked. To avoid getting double dumps, the old KMSG_DUMP_PANIC is moved below crash_kexec(). The mtdoops driver is modified to handle KMSG_DUMP_KEXEC in the same way as a panic. Signed-off-by: KOSAKI Motohiro Acked-by: Simon Kagstrom Signed-off-by: David Woodhouse --- drivers/mtd/mtdoops.c | 2 +- include/linux/kmsg_dump.h | 1 + kernel/kexec.c | 4 ++++ kernel/panic.c | 3 ++- kernel/printk.c | 1 + 5 files changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c index a714ec482761..92e12df0917f 100644 --- a/drivers/mtd/mtdoops.c +++ b/drivers/mtd/mtdoops.c @@ -322,7 +322,7 @@ static void mtdoops_do_dump(struct kmsg_dumper *dumper, memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy); /* Panics must be written immediately */ - if (reason == KMSG_DUMP_PANIC) { + if (reason != KMSG_DUMP_OOPS) { if (!cxt->mtd->panic_write) printk(KERN_ERR "mtdoops: Cannot write from panic without panic_write\n"); else diff --git a/include/linux/kmsg_dump.h b/include/linux/kmsg_dump.h index e32aa268efac..24b44145a886 100644 --- a/include/linux/kmsg_dump.h +++ b/include/linux/kmsg_dump.h @@ -17,6 +17,7 @@ enum kmsg_dump_reason { KMSG_DUMP_OOPS, KMSG_DUMP_PANIC, + KMSG_DUMP_KEXEC, }; /** diff --git a/kernel/kexec.c b/kernel/kexec.c index 433e9fcc1fc5..ae217488fef8 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -1074,6 +1075,9 @@ void crash_kexec(struct pt_regs *regs) if (mutex_trylock(&kexec_mutex)) { if (kexec_crash_image) { struct pt_regs fixed_regs; + + kmsg_dump(KMSG_DUMP_KEXEC); + crash_setup_regs(&fixed_regs, regs); crash_save_vmcoreinfo(); machine_crash_shutdown(&fixed_regs); diff --git a/kernel/panic.c b/kernel/panic.c index 5827f7b97254..c787333282b8 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -75,7 +75,6 @@ NORET_TYPE void panic(const char * fmt, ...) dump_stack(); #endif - kmsg_dump(KMSG_DUMP_PANIC); /* * If we have crashed and we have a crash kernel loaded let it handle * everything else. @@ -83,6 +82,8 @@ NORET_TYPE void panic(const char * fmt, ...) */ crash_kexec(NULL); + kmsg_dump(KMSG_DUMP_PANIC); + /* * Note smp_send_stop is the usual smp shutdown function, which * unfortunately means it may not be hardened to work in a panic diff --git a/kernel/printk.c b/kernel/printk.c index 1ded8e7dd19b..2c9dc0b03a5e 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1467,6 +1467,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_unregister); static const char const *kmsg_reasons[] = { [KMSG_DUMP_OOPS] = "oops", [KMSG_DUMP_PANIC] = "panic", + [KMSG_DUMP_KEXEC] = "kexec", }; static const char *kmsg_to_str(enum kmsg_dump_reason reason) From 5b889bf237fca383b5807ad69fde3ad1e2287e42 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 31 Dec 2009 19:06:35 +0100 Subject: [PATCH 0286/1626] PCI: Fix build if quirks are not enabled After commit b9c3b266411d27f1a6466c19d146d08db576bfea ("PCI: support device-specific reset methods") the kernel build is broken if CONFIG_PCI_QUIRKS is unset. Fix this by moving pci_dev_specific_reset() to drivers/pci/quirks.c and providing an empty replacement for !CONFIG_PCI_QUIRKS builds. Signed-off-by: Rafael J. Wysocki Reported-by: Ingo Molnar Signed-off-by: Linus Torvalds --- drivers/pci/pci.c | 15 --------------- drivers/pci/pci.h | 2 +- drivers/pci/quirks.c | 19 ++++++++++++++++++- 3 files changed, 19 insertions(+), 17 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 864e703cf737..0906599ebfde 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2284,21 +2284,6 @@ static int pci_parent_bus_reset(struct pci_dev *dev, int probe) return 0; } -static int pci_dev_specific_reset(struct pci_dev *dev, int probe) -{ - struct pci_dev_reset_methods *i; - - for (i = pci_dev_reset_methods; i->reset; i++) { - if ((i->vendor == dev->vendor || - i->vendor == (u16)PCI_ANY_ID) && - (i->device == dev->device || - i->device == (u16)PCI_ANY_ID)) - return i->reset(dev, probe); - } - - return -ENOTTY; -} - static int pci_dev_reset(struct pci_dev *dev, int probe) { int rc; diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 709eaa4fee51..fbd0e3adbca3 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -319,6 +319,6 @@ struct pci_dev_reset_methods { int (*reset)(struct pci_dev *dev, int probe); }; -extern struct pci_dev_reset_methods pci_dev_reset_methods[]; +extern int pci_dev_specific_reset(struct pci_dev *dev, int probe); #endif /* DRIVERS_PCI_H */ diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 8726698866b1..5c449fc4db19 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2684,14 +2684,31 @@ static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe) #define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed -struct pci_dev_reset_methods pci_dev_reset_methods[] = { +static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, reset_intel_82599_sfp_virtfn }, { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, reset_intel_generic_dev }, { 0 } }; + +int pci_dev_specific_reset(struct pci_dev *dev, int probe) +{ + struct pci_dev_reset_methods *i; + + for (i = pci_dev_reset_methods; i->reset; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) + return i->reset(dev, probe); + } + + return -ENOTTY; +} + #else void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} +int pci_dev_specific_reset(struct pci_dev *dev, int probe) { return -ENOTTY; } #endif EXPORT_SYMBOL(pci_fixup_device); From df9d1e8a4379119cbc47c474f168b5103e404e17 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 31 Dec 2009 16:44:43 -0800 Subject: [PATCH 0287/1626] pci: avoid compiler warning in quirks.c Introduced by commit 5b889bf23 ("PCI: Fix build if quirks are not enabled"), which made the pci_dev_reset_methods[] array static and 'const', but didn't then change the code to match, and use a const pointer when moving it to quirks.c. Trivially fixed by just adding the required 'const' to the iterator variable. Reported-by: Stephen Rothwell Cc: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- drivers/pci/quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 5c449fc4db19..c74694345b6e 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2694,7 +2694,7 @@ static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { int pci_dev_specific_reset(struct pci_dev *dev, int probe) { - struct pci_dev_reset_methods *i; + const struct pci_dev_reset_methods *i; for (i = pci_dev_reset_methods; i->reset; i++) { if ((i->vendor == dev->vendor || From cd6e125c58ae1561bedb6ea6f70b00d6c2599d62 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 31 Dec 2009 17:26:05 -0800 Subject: [PATCH 0288/1626] twl4030-irq.c: fix compiler warning due to raw-spinlock conversion Commit 239007b844 ("genirq: Convert irq_desc.lock to raw_spinlock") seems to have missed this driver, leaving it to use the normal spin-lock functions for the irq descriptor lock, which is now a raw lock. Reported-and-compile-tested-by: Stephen Rothwell Signed-off-by: Linus Torvalds --- drivers/mfd/twl4030-irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index 20d29bafc9f5..9df9a5ad38f9 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -568,12 +568,12 @@ static void twl4030_sih_do_edge(struct work_struct *work) bytes[byte] &= ~(0x03 << off); - spin_lock_irq(&d->lock); + raw_spin_lock_irq(&d->lock); if (d->status & IRQ_TYPE_EDGE_RISING) bytes[byte] |= BIT(off + 1); if (d->status & IRQ_TYPE_EDGE_FALLING) bytes[byte] |= BIT(off + 0); - spin_unlock_irq(&d->lock); + raw_spin_unlock_irq(&d->lock); edge_change &= ~BIT(i); } From ee5f4d9cdf32fd99172d11665c592a288c2b1ff4 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 1 Jan 2010 02:36:15 -0500 Subject: [PATCH 0289/1626] ext4: Fix accounting of reserved metadata blocks Commit 0637c6f had a typo which caused the reserved metadata blocks to not be released correctly. Fix this. Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 84eeb8f515a3..bdaa92a29e0e 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1076,9 +1076,9 @@ static void ext4_da_update_reserve_space(struct inode *inode, int used) * only when we have written all of the delayed * allocation blocks. */ - mdb_free = ei->i_allocated_meta_blocks; + mdb_free = ei->i_reserved_meta_blocks; + ei->i_reserved_meta_blocks = 0; percpu_counter_sub(&sbi->s_dirtyblocks_counter, mdb_free); - ei->i_allocated_meta_blocks = 0; } spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); @@ -1889,8 +1889,8 @@ static void ext4_da_release_space(struct inode *inode, int to_free) * only when we have written all of the delayed * allocation blocks. */ - to_free += ei->i_allocated_meta_blocks; - ei->i_allocated_meta_blocks = 0; + to_free += ei->i_reserved_meta_blocks; + ei->i_reserved_meta_blocks = 0; } /* update fs dirty blocks counter */ From 9d0be50230b333005635967f7ecd4897dbfd181b Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 1 Jan 2010 02:41:30 -0500 Subject: [PATCH 0290/1626] ext4: Calculate metadata requirements more accurately In the past, ext4_calc_metadata_amount(), and its sub-functions ext4_ext_calc_metadata_amount() and ext4_indirect_calc_metadata_amount() badly over-estimated the number of metadata blocks that might be required for delayed allocation blocks. This didn't matter as much when functions which managed the reserved metadata blocks were more aggressive about dropping reserved metadata blocks as delayed allocation blocks were written, but unfortunately they were too aggressive. This was fixed in commit 0637c6f, but as a result the over-estimation by ext4_calc_metadata_amount() would lead to reserving 2-3 times the number of pending delayed allocation blocks as potentially required metadata blocks. So if there are 1 megabytes of blocks which have been not yet been allocation, up to 3 megabytes of space would get reserved out of the user's quota and from the file system free space pool until all of the inode's data blocks have been allocated. This commit addresses this problem by much more accurately estimating the number of metadata blocks that will be required. It will still somewhat over-estimate the number of blocks needed, since it must make a worst case estimate not knowing which physical blocks will be needed, but it is much more accurate than before. Signed-off-by: "Theodore Ts'o" --- fs/ext4/ext4.h | 2 ++ fs/ext4/ext4_extents.h | 3 +- fs/ext4/extents.c | 49 +++++++++++++++++++++------------ fs/ext4/inode.c | 62 ++++++++++++++++++++++++------------------ fs/ext4/super.c | 1 + 5 files changed, 73 insertions(+), 44 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 56f9271ee8cc..af7b62699ea9 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -699,6 +699,8 @@ struct ext4_inode_info { unsigned int i_reserved_meta_blocks; unsigned int i_allocated_meta_blocks; unsigned short i_delalloc_reserved_flag; + sector_t i_da_metadata_calc_last_lblock; + int i_da_metadata_calc_len; /* on-disk additional length */ __u16 i_extra_isize; diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h index 2ca686454e87..bdb6ce7e2eb4 100644 --- a/fs/ext4/ext4_extents.h +++ b/fs/ext4/ext4_extents.h @@ -225,7 +225,8 @@ static inline void ext4_ext_mark_initialized(struct ext4_extent *ext) ext->ee_len = cpu_to_le16(ext4_ext_get_actual_len(ext)); } -extern int ext4_ext_calc_metadata_amount(struct inode *inode, int blocks); +extern int ext4_ext_calc_metadata_amount(struct inode *inode, + sector_t lblocks); extern ext4_fsblk_t ext_pblock(struct ext4_extent *ex); extern ext4_fsblk_t idx_pblock(struct ext4_extent_idx *); extern void ext4_ext_store_pblock(struct ext4_extent *, ext4_fsblk_t); diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 91ae46098ea4..7d7b74e94687 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -296,29 +296,44 @@ static inline int ext4_ext_space_root_idx(struct inode *inode, int check) * to allocate @blocks * Worse case is one block per extent */ -int ext4_ext_calc_metadata_amount(struct inode *inode, int blocks) +int ext4_ext_calc_metadata_amount(struct inode *inode, sector_t lblock) { - int lcap, icap, rcap, leafs, idxs, num; - int newextents = blocks; + struct ext4_inode_info *ei = EXT4_I(inode); + int idxs, num = 0; - rcap = ext4_ext_space_root_idx(inode, 0); - lcap = ext4_ext_space_block(inode, 0); - icap = ext4_ext_space_block_idx(inode, 0); - - /* number of new leaf blocks needed */ - num = leafs = (newextents + lcap - 1) / lcap; + idxs = ((inode->i_sb->s_blocksize - sizeof(struct ext4_extent_header)) + / sizeof(struct ext4_extent_idx)); /* - * Worse case, we need separate index block(s) - * to link all new leaf blocks + * If the new delayed allocation block is contiguous with the + * previous da block, it can share index blocks with the + * previous block, so we only need to allocate a new index + * block every idxs leaf blocks. At ldxs**2 blocks, we need + * an additional index block, and at ldxs**3 blocks, yet + * another index blocks. */ - idxs = (leafs + icap - 1) / icap; - do { - num += idxs; - idxs = (idxs + icap - 1) / icap; - } while (idxs > rcap); + if (ei->i_da_metadata_calc_len && + ei->i_da_metadata_calc_last_lblock+1 == lblock) { + if ((ei->i_da_metadata_calc_len % idxs) == 0) + num++; + if ((ei->i_da_metadata_calc_len % (idxs*idxs)) == 0) + num++; + if ((ei->i_da_metadata_calc_len % (idxs*idxs*idxs)) == 0) { + num++; + ei->i_da_metadata_calc_len = 0; + } else + ei->i_da_metadata_calc_len++; + ei->i_da_metadata_calc_last_lblock++; + return num; + } - return num; + /* + * In the worst case we need a new set of index blocks at + * every level of the inode's extent tree. + */ + ei->i_da_metadata_calc_len = 1; + ei->i_da_metadata_calc_last_lblock = lblock; + return ext_depth(inode) + 1; } static int diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index bdaa92a29e0e..c818972c8302 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1009,38 +1009,44 @@ qsize_t *ext4_get_reserved_space(struct inode *inode) return &EXT4_I(inode)->i_reserved_quota; } #endif + /* * Calculate the number of metadata blocks need to reserve - * to allocate @blocks for non extent file based file + * to allocate a new block at @lblocks for non extent file based file */ -static int ext4_indirect_calc_metadata_amount(struct inode *inode, int blocks) +static int ext4_indirect_calc_metadata_amount(struct inode *inode, + sector_t lblock) { - int icap = EXT4_ADDR_PER_BLOCK(inode->i_sb); - int ind_blks, dind_blks, tind_blks; + struct ext4_inode_info *ei = EXT4_I(inode); + int dind_mask = EXT4_ADDR_PER_BLOCK(inode->i_sb) - 1; + int blk_bits; - /* number of new indirect blocks needed */ - ind_blks = (blocks + icap - 1) / icap; + if (lblock < EXT4_NDIR_BLOCKS) + return 0; - dind_blks = (ind_blks + icap - 1) / icap; + lblock -= EXT4_NDIR_BLOCKS; - tind_blks = 1; - - return ind_blks + dind_blks + tind_blks; + if (ei->i_da_metadata_calc_len && + (lblock & dind_mask) == ei->i_da_metadata_calc_last_lblock) { + ei->i_da_metadata_calc_len++; + return 0; + } + ei->i_da_metadata_calc_last_lblock = lblock & dind_mask; + ei->i_da_metadata_calc_len = 1; + blk_bits = roundup_pow_of_two(lblock + 1); + return (blk_bits / EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb)) + 1; } /* * Calculate the number of metadata blocks need to reserve - * to allocate given number of blocks + * to allocate a block located at @lblock */ -static int ext4_calc_metadata_amount(struct inode *inode, int blocks) +static int ext4_calc_metadata_amount(struct inode *inode, sector_t lblock) { - if (!blocks) - return 0; - if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) - return ext4_ext_calc_metadata_amount(inode, blocks); + return ext4_ext_calc_metadata_amount(inode, lblock); - return ext4_indirect_calc_metadata_amount(inode, blocks); + return ext4_indirect_calc_metadata_amount(inode, lblock); } /* @@ -1078,6 +1084,7 @@ static void ext4_da_update_reserve_space(struct inode *inode, int used) */ mdb_free = ei->i_reserved_meta_blocks; ei->i_reserved_meta_blocks = 0; + ei->i_da_metadata_calc_len = 0; percpu_counter_sub(&sbi->s_dirtyblocks_counter, mdb_free); } spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); @@ -1802,12 +1809,15 @@ static int ext4_journalled_write_end(struct file *file, return ret ? ret : copied; } -static int ext4_da_reserve_space(struct inode *inode, int nrblocks) +/* + * Reserve a single block located at lblock + */ +static int ext4_da_reserve_space(struct inode *inode, sector_t lblock) { int retries = 0; struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); struct ext4_inode_info *ei = EXT4_I(inode); - unsigned long md_needed, md_reserved, total = 0; + unsigned long md_needed, md_reserved; /* * recalculate the amount of metadata blocks to reserve @@ -1817,8 +1827,7 @@ static int ext4_da_reserve_space(struct inode *inode, int nrblocks) repeat: spin_lock(&ei->i_block_reservation_lock); md_reserved = ei->i_reserved_meta_blocks; - md_needed = ext4_calc_metadata_amount(inode, nrblocks); - total = md_needed + nrblocks; + md_needed = ext4_calc_metadata_amount(inode, lblock); spin_unlock(&ei->i_block_reservation_lock); /* @@ -1826,7 +1835,7 @@ repeat: * later. Real quota accounting is done at pages writeout * time. */ - if (vfs_dq_reserve_block(inode, total)) { + if (vfs_dq_reserve_block(inode, md_needed + 1)) { /* * We tend to badly over-estimate the amount of * metadata blocks which are needed, so if we have @@ -1838,8 +1847,8 @@ repeat: return -EDQUOT; } - if (ext4_claim_free_blocks(sbi, total)) { - vfs_dq_release_reservation_block(inode, total); + if (ext4_claim_free_blocks(sbi, md_needed + 1)) { + vfs_dq_release_reservation_block(inode, md_needed + 1); if (ext4_should_retry_alloc(inode->i_sb, &retries)) { retry: if (md_reserved) @@ -1850,7 +1859,7 @@ repeat: return -ENOSPC; } spin_lock(&ei->i_block_reservation_lock); - ei->i_reserved_data_blocks += nrblocks; + ei->i_reserved_data_blocks++; ei->i_reserved_meta_blocks += md_needed; spin_unlock(&ei->i_block_reservation_lock); @@ -1891,6 +1900,7 @@ static void ext4_da_release_space(struct inode *inode, int to_free) */ to_free += ei->i_reserved_meta_blocks; ei->i_reserved_meta_blocks = 0; + ei->i_da_metadata_calc_len = 0; } /* update fs dirty blocks counter */ @@ -2504,7 +2514,7 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock, * XXX: __block_prepare_write() unmaps passed block, * is it OK? */ - ret = ext4_da_reserve_space(inode, 1); + ret = ext4_da_reserve_space(inode, iblock); if (ret) /* not enough space to reserve */ return ret; diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 7cccb35c0f4d..735c20d5fd56 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -702,6 +702,7 @@ static struct inode *ext4_alloc_inode(struct super_block *sb) ei->i_reserved_data_blocks = 0; ei->i_reserved_meta_blocks = 0; ei->i_allocated_meta_blocks = 0; + ei->i_da_metadata_calc_len = 0; ei->i_delalloc_reserved_flag = 0; spin_lock_init(&(ei->i_block_reservation_lock)); #ifdef CONFIG_QUOTA From dc8601a224d546bb321b058fc5ecabdb688a3582 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Wed, 30 Dec 2009 02:27:24 -0500 Subject: [PATCH 0291/1626] [ARM] pxa: do not enable L2 after MMU is enabled Outer cache checked whether L2 is enabled or not. If L2 isn't enabled in XSC3, it would enable L2. This operation is evil that would make system hang. In XSC3 core document, these words are mentioned in below. "Following reset, the L2 Unified Cache Enable bit is cleared. To enable the L2 Cache, software may set the bit to a '1' before or at the same time as enabling the MMU. Enabling the L2 Cache after the MMU has been enabled or disabling the L2 Cache after the L2 Cache has been enabled, may result in unpredictable behavior of the processor." When outer cache is initialized, the MMU is already enabled. We couldn't enable L2 after MMU enabled. Signed-off-by: Haojian Zhuang Signed-off-by: Eric Miao --- arch/arm/mm/cache-xsc3l2.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c index 5d180cb0bd94..c3154928bccd 100644 --- a/arch/arm/mm/cache-xsc3l2.c +++ b/arch/arm/mm/cache-xsc3l2.c @@ -221,15 +221,14 @@ static int __init xsc3_l2_init(void) if (!cpu_is_xsc3() || !xsc3_l2_present()) return 0; - if (!(get_cr() & CR_L2)) { + if (get_cr() & CR_L2) { pr_info("XScale3 L2 cache enabled.\n"); - adjust_cr(CR_L2, CR_L2); xsc3_l2_inv_all(); - } - outer_cache.inv_range = xsc3_l2_inv_range; - outer_cache.clean_range = xsc3_l2_clean_range; - outer_cache.flush_range = xsc3_l2_flush_range; + outer_cache.inv_range = xsc3_l2_inv_range; + outer_cache.clean_range = xsc3_l2_clean_range; + outer_cache.flush_range = xsc3_l2_flush_range; + } return 0; } From 548c6af4627f4dcb24512a381193206e09bd6d31 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Wed, 30 Dec 2009 10:02:57 -0500 Subject: [PATCH 0292/1626] [ARM] pxa: enable L2 if present in XSC3 Check whether L2 is present or not in XSC3. If it's present, enable L2 immediately. Disabling L2 after L2 is enabled that would result in unpredicatable behavior of XSC3 processor. Signed-off-by: Haojian Zhuang Signed-off-by: Eric Miao --- arch/arm/mm/proc-xsc3.S | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 96456f548798..8e4f6dca8997 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -407,6 +407,13 @@ __xsc3_setup: adr r5, xsc3_crval ldmia r5, {r5, r6} + +#ifdef CONFIG_CACHE_XSC3L2 + mrc p15, 1, r0, c0, c0, 1 @ get L2 present information + ands r0, r0, #0xf8 + orrne r6, r6, #(1 << 26) @ enable L2 if present +#endif + mrc p15, 0, r0, c1, c0, 0 @ get control register bic r0, r0, r5 @ ..V. ..R. .... ..A. orr r0, r0, r6 @ ..VI Z..S .... .C.M (mmu) From c9c041fcb1a4d69ed4791f00b57554eeb341d148 Mon Sep 17 00:00:00 2001 From: Anisse Astier Date: Thu, 31 Dec 2009 16:41:33 +0100 Subject: [PATCH 0293/1626] hp-wmi: remove double free caused by merge conflict Commit 3e9b988e4edf065d39c1343937f717319b1c1065 "wmi: Free the allocated acpi objects through wmi_get_event_data" had the same purpose as commit 44ef00e6482e755f36629773abc2aee83a6f53e3 "hp-wmi: Fix two memleaks" This should solve this regression: http://bugzilla.kernel.org/show_bug.cgi?id=14890 Signed-off-by: Anisse Astier Reported-by: Sedat Dilek Signed-off-by: Len Brown --- drivers/platform/x86/hp-wmi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 5b648f0c6075..ad4c414dbfbc 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -393,8 +393,6 @@ static void hp_wmi_notify(u32 value, void *context) } else printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n", eventcode); - - kfree(obj); } static int __init hp_wmi_input_setup(void) From 0719d3434747889b314a1e8add776418c4148bcf Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 30 Dec 2009 00:39:22 +0100 Subject: [PATCH 0294/1626] reiserfs: Fix reiserfs lock <-> i_xattr_sem dependency inversion i_xattr_sem depends on the reiserfs lock. But after we grab i_xattr_sem, we may relax/relock the reiserfs lock while waiting on a freezed filesystem, creating a dependency inversion between the two locks. In order to avoid the i_xattr_sem -> reiserfs lock dependency, let's create a reiserfs_down_read_safe() that acts like reiserfs_mutex_lock_safe(): relax the reiserfs lock while grabbing another lock to avoid undesired dependencies induced by the heivyweight reiserfs lock. This fixes the following warning: [ 990.005931] ======================================================= [ 990.012373] [ INFO: possible circular locking dependency detected ] [ 990.013233] 2.6.33-rc1 #1 [ 990.013233] ------------------------------------------------------- [ 990.013233] dbench/1891 is trying to acquire lock: [ 990.013233] (&REISERFS_SB(s)->lock){+.+.+.}, at: [] reiserfs_write_lock+0x35/0x50 [ 990.013233] [ 990.013233] but task is already holding lock: [ 990.013233] (&REISERFS_I(inode)->i_xattr_sem){+.+.+.}, at: [] reiserfs_xattr_set_handle+0x8a/0x470 [ 990.013233] [ 990.013233] which lock already depends on the new lock. [ 990.013233] [ 990.013233] [ 990.013233] the existing dependency chain (in reverse order) is: [ 990.013233] [ 990.013233] -> #1 (&REISERFS_I(inode)->i_xattr_sem){+.+.+.}: [ 990.013233] [] __lock_acquire+0xf9c/0x1560 [ 990.013233] [] lock_acquire+0x8f/0xb0 [ 990.013233] [] down_write+0x44/0x80 [ 990.013233] [] reiserfs_xattr_set_handle+0x8a/0x470 [ 990.013233] [] reiserfs_xattr_set+0xb0/0x150 [ 990.013233] [] user_set+0x8a/0x90 [ 990.013233] [] reiserfs_setxattr+0xaa/0xb0 [ 990.013233] [] __vfs_setxattr_noperm+0x36/0xa0 [ 990.013233] [] vfs_setxattr+0xbc/0xc0 [ 990.013233] [] setxattr+0xc0/0x150 [ 990.013233] [] sys_fsetxattr+0x8d/0xa0 [ 990.013233] [] system_call_fastpath+0x16/0x1b [ 990.013233] [ 990.013233] -> #0 (&REISERFS_SB(s)->lock){+.+.+.}: [ 990.013233] [] __lock_acquire+0x12d0/0x1560 [ 990.013233] [] lock_acquire+0x8f/0xb0 [ 990.013233] [] __mutex_lock_common+0x47/0x3b0 [ 990.013233] [] mutex_lock_nested+0x3e/0x50 [ 990.013233] [] reiserfs_write_lock+0x35/0x50 [ 990.013233] [] reiserfs_prepare_write+0x45/0x180 [ 990.013233] [] reiserfs_xattr_set_handle+0x2a6/0x470 [ 990.013233] [] reiserfs_xattr_set+0xb0/0x150 [ 990.013233] [] user_set+0x8a/0x90 [ 990.013233] [] reiserfs_setxattr+0xaa/0xb0 [ 990.013233] [] __vfs_setxattr_noperm+0x36/0xa0 [ 990.013233] [] vfs_setxattr+0xbc/0xc0 [ 990.013233] [] setxattr+0xc0/0x150 [ 990.013233] [] sys_fsetxattr+0x8d/0xa0 [ 990.013233] [] system_call_fastpath+0x16/0x1b [ 990.013233] [ 990.013233] other info that might help us debug this: [ 990.013233] [ 990.013233] 2 locks held by dbench/1891: [ 990.013233] #0: (&sb->s_type->i_mutex_key#12){+.+.+.}, at: [] vfs_setxattr+0x78/0xc0 [ 990.013233] #1: (&REISERFS_I(inode)->i_xattr_sem){+.+.+.}, at: [] reiserfs_xattr_set_handle+0x8a/0x470 [ 990.013233] [ 990.013233] stack backtrace: [ 990.013233] Pid: 1891, comm: dbench Not tainted 2.6.33-rc1 #1 [ 990.013233] Call Trace: [ 990.013233] [] print_circular_bug+0xe9/0xf0 [ 990.013233] [] __lock_acquire+0x12d0/0x1560 [ 990.013233] [] ? reiserfs_xattr_set_handle+0x8a/0x470 [ 990.013233] [] lock_acquire+0x8f/0xb0 [ 990.013233] [] ? reiserfs_write_lock+0x35/0x50 [ 990.013233] [] ? reiserfs_xattr_set_handle+0x8a/0x470 [ 990.013233] [] __mutex_lock_common+0x47/0x3b0 [ 990.013233] [] ? reiserfs_write_lock+0x35/0x50 [ 990.013233] [] ? reiserfs_write_lock+0x35/0x50 [ 990.013233] [] ? mark_held_locks+0x72/0xa0 [ 990.013233] [] ? __mutex_unlock_slowpath+0xbd/0x140 [ 990.013233] [] ? trace_hardirqs_on_caller+0x14d/0x1a0 [ 990.013233] [] mutex_lock_nested+0x3e/0x50 [ 990.013233] [] reiserfs_write_lock+0x35/0x50 [ 990.013233] [] reiserfs_prepare_write+0x45/0x180 [ 990.013233] [] reiserfs_xattr_set_handle+0x2a6/0x470 [ 990.013233] [] reiserfs_xattr_set+0xb0/0x150 [ 990.013233] [] ? __mutex_lock_common+0x284/0x3b0 [ 990.013233] [] user_set+0x8a/0x90 [ 990.013233] [] reiserfs_setxattr+0xaa/0xb0 [ 990.013233] [] __vfs_setxattr_noperm+0x36/0xa0 [ 990.013233] [] vfs_setxattr+0xbc/0xc0 [ 990.013233] [] setxattr+0xc0/0x150 [ 990.013233] [] ? sched_clock_cpu+0xb8/0x100 [ 990.013233] [] ? trace_hardirqs_off+0xd/0x10 [ 990.013233] [] ? cpu_clock+0x43/0x50 [ 990.013233] [] ? fget+0xb0/0x110 [ 990.013233] [] ? fget+0x0/0x110 [ 990.013233] [] ? sysret_check+0x27/0x62 [ 990.013233] [] sys_fsetxattr+0x8d/0xa0 [ 990.013233] [] system_call_fastpath+0x16/0x1b Reported-and-tested-by: Christian Kujau Signed-off-by: Frederic Weisbecker Cc: Alexander Beregalov Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/xattr.c | 2 +- include/linux/reiserfs_fs.h | 8 ++++++++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 8891cd88a3f4..a0e2e7acdc75 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -484,7 +484,7 @@ reiserfs_xattr_set_handle(struct reiserfs_transaction_handle *th, if (IS_ERR(dentry)) return PTR_ERR(dentry); - down_write(&REISERFS_I(inode)->i_xattr_sem); + reiserfs_down_read_safe(&REISERFS_I(inode)->i_xattr_sem, inode->i_sb); xahash = xattr_hash(buffer, buffer_size); while (buffer_pos < buffer_size || buffer_pos == 0) { diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h index 4351b49e2b1e..35d3f459b0ac 100644 --- a/include/linux/reiserfs_fs.h +++ b/include/linux/reiserfs_fs.h @@ -106,6 +106,14 @@ reiserfs_mutex_lock_nested_safe(struct mutex *m, unsigned int subclass, reiserfs_write_lock(s); } +static inline void +reiserfs_down_read_safe(struct rw_semaphore *sem, struct super_block *s) +{ + reiserfs_write_unlock(s); + down_read(sem); + reiserfs_write_lock(s); +} + /* * When we schedule, we usually want to also release the write lock, * according to the previous bkl based locking scheme of reiserfs. From c4a62ca362258d98f42efb282cfbf9b61caffdbe Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 30 Dec 2009 03:20:19 +0100 Subject: [PATCH 0295/1626] reiserfs: Warn on lock relax if taken recursively When we relax the reiserfs lock to avoid creating unwanted dependencies against others locks while grabbing these, we want to ensure it has not been taken recursively, otherwise the lock won't be really relaxed. Only its depth will be decreased. The unwanted dependency would then actually happen. To prevent from that, add a reiserfs_lock_check_recursive() call in the places that need it. Signed-off-by: Frederic Weisbecker Cc: Alexander Beregalov Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/lock.c | 9 +++++++++ include/linux/reiserfs_fs.h | 9 +++++++++ 2 files changed, 18 insertions(+) diff --git a/fs/reiserfs/lock.c b/fs/reiserfs/lock.c index ee2cfc0fd8a7..b87aa2c1afc1 100644 --- a/fs/reiserfs/lock.c +++ b/fs/reiserfs/lock.c @@ -86,3 +86,12 @@ void reiserfs_check_lock_depth(struct super_block *sb, char *caller) reiserfs_panic(sb, "%s called without kernel lock held %d", caller); } + +#ifdef CONFIG_REISERFS_CHECK +void reiserfs_lock_check_recursive(struct super_block *sb) +{ + struct reiserfs_sb_info *sb_i = REISERFS_SB(sb); + + WARN_ONCE((sb_i->lock_depth > 0), "Unwanted recursive reiserfs lock!\n"); +} +#endif diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h index 35d3f459b0ac..793bf8351ab8 100644 --- a/include/linux/reiserfs_fs.h +++ b/include/linux/reiserfs_fs.h @@ -62,6 +62,12 @@ void reiserfs_write_unlock(struct super_block *s); int reiserfs_write_lock_once(struct super_block *s); void reiserfs_write_unlock_once(struct super_block *s, int lock_depth); +#ifdef CONFIG_REISERFS_CHECK +void reiserfs_lock_check_recursive(struct super_block *s); +#else +static inline void reiserfs_lock_check_recursive(struct super_block *s) { } +#endif + /* * Several mutexes depend on the write lock. * However sometimes we want to relax the write lock while we hold @@ -92,6 +98,7 @@ void reiserfs_write_unlock_once(struct super_block *s, int lock_depth); static inline void reiserfs_mutex_lock_safe(struct mutex *m, struct super_block *s) { + reiserfs_lock_check_recursive(s); reiserfs_write_unlock(s); mutex_lock(m); reiserfs_write_lock(s); @@ -101,6 +108,7 @@ static inline void reiserfs_mutex_lock_nested_safe(struct mutex *m, unsigned int subclass, struct super_block *s) { + reiserfs_lock_check_recursive(s); reiserfs_write_unlock(s); mutex_lock_nested(m, subclass); reiserfs_write_lock(s); @@ -109,6 +117,7 @@ reiserfs_mutex_lock_nested_safe(struct mutex *m, unsigned int subclass, static inline void reiserfs_down_read_safe(struct rw_semaphore *sem, struct super_block *s) { + reiserfs_lock_check_recursive(s); reiserfs_write_unlock(s); down_read(sem); reiserfs_write_lock(s); From 27026a05bb805866a3b9068dda8153b72cb942f4 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 30 Dec 2009 05:06:21 +0100 Subject: [PATCH 0296/1626] reiserfs: Fix reiserfs lock <-> i_mutex dependency inversion on xattr While deleting the xattrs of an inode, we hold the reiserfs lock and grab the inode->i_mutex of the targeted inode and the root private xattr directory. Later on, we may relax the reiserfs lock for various reasons, this creates inverted dependencies. We can remove the reiserfs lock -> i_mutex dependency by relaxing the former before calling open_xa_dir(). This is fine because the lookup and creation of xattr private directories done in open_xa_dir() are covered by the targeted inode mutexes. And deeper operations in the tree are still done under the write lock. This fixes the following lockdep report: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-atom #173 ------------------------------------------------------- cp/3204 is trying to acquire lock: (&REISERFS_SB(s)->lock){+.+.+.}, at: [] reiserfs_write_lock_once+0x29/0x50 but task is already holding lock: (&sb->s_type->i_mutex_key#4/3){+.+.+.}, at: [] open_xa_dir+0xd8/0x1b0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&sb->s_type->i_mutex_key#4/3){+.+.+.}: [] __lock_acquire+0x11ff/0x19e0 [] lock_acquire+0x68/0x90 [] mutex_lock_nested+0x5b/0x340 [] open_xa_dir+0x43/0x1b0 [] reiserfs_for_each_xattr+0x62/0x260 [] reiserfs_delete_xattrs+0x1a/0x60 [] reiserfs_delete_inode+0x9f/0x150 [] generic_delete_inode+0xa2/0x170 [] generic_drop_inode+0x4f/0x70 [] iput+0x47/0x50 [] do_unlinkat+0xd5/0x160 [] sys_unlink+0x10/0x20 [] sysenter_do_call+0x12/0x32 -> #0 (&REISERFS_SB(s)->lock){+.+.+.}: [] __lock_acquire+0x18f6/0x19e0 [] lock_acquire+0x68/0x90 [] mutex_lock_nested+0x5b/0x340 [] reiserfs_write_lock_once+0x29/0x50 [] reiserfs_lookup+0x62/0x140 [] __lookup_hash+0xef/0x110 [] lookup_one_len+0x8d/0xc0 [] open_xa_dir+0xea/0x1b0 [] xattr_lookup+0x15/0x160 [] reiserfs_xattr_get+0x56/0x2a0 [] reiserfs_get_acl+0xa2/0x360 [] reiserfs_cache_default_acl+0x3a/0x160 [] reiserfs_mkdir+0x6c/0x2c0 [] vfs_mkdir+0xd6/0x180 [] sys_mkdirat+0xc0/0xd0 [] sys_mkdir+0x20/0x30 [] sysenter_do_call+0x12/0x32 other info that might help us debug this: 2 locks held by cp/3204: #0: (&sb->s_type->i_mutex_key#4/1){+.+.+.}, at: [] lookup_create+0x26/0xa0 #1: (&sb->s_type->i_mutex_key#4/3){+.+.+.}, at: [] open_xa_dir+0xd8/0x1b0 stack backtrace: Pid: 3204, comm: cp Not tainted 2.6.32-atom #173 Call Trace: [] ? printk+0x18/0x1a [] print_circular_bug+0xca/0xd0 [] __lock_acquire+0x18f6/0x19e0 [] ? check_usage+0x6a/0x460 [] lock_acquire+0x68/0x90 [] ? reiserfs_write_lock_once+0x29/0x50 [] ? reiserfs_write_lock_once+0x29/0x50 [] mutex_lock_nested+0x5b/0x340 [] ? reiserfs_write_lock_once+0x29/0x50 [] reiserfs_write_lock_once+0x29/0x50 [] reiserfs_lookup+0x62/0x140 [] ? debug_check_no_locks_freed+0x8a/0x140 [] ? trace_hardirqs_on_caller+0x124/0x170 [] __lookup_hash+0xef/0x110 [] lookup_one_len+0x8d/0xc0 [] open_xa_dir+0xea/0x1b0 [] xattr_lookup+0x15/0x160 [] reiserfs_xattr_get+0x56/0x2a0 [] reiserfs_get_acl+0xa2/0x360 [] ? new_inode+0x27/0xa0 [] reiserfs_cache_default_acl+0x3a/0x160 [] ? _spin_unlock+0x27/0x40 [] reiserfs_mkdir+0x6c/0x2c0 [] ? __d_lookup+0x108/0x190 [] ? mark_held_locks+0x62/0x80 [] ? mutex_lock_nested+0x2bd/0x340 [] ? generic_permission+0x1a/0xa0 [] ? security_inode_permission+0x1e/0x20 [] vfs_mkdir+0xd6/0x180 [] sys_mkdirat+0xc0/0xd0 [] ? up_read+0x16/0x30 [] ? restore_all_notrace+0x0/0x18 [] sys_mkdir+0x20/0x30 [] sysenter_do_call+0x12/0x32 v2: Don't drop reiserfs_mutex_lock_nested_safe() as we'll still need it later Signed-off-by: Frederic Weisbecker Tested-by: Christian Kujau Cc: Alexander Beregalov Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/xattr.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index a0e2e7acdc75..c320c7792c75 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -234,17 +234,22 @@ static int reiserfs_for_each_xattr(struct inode *inode, if (IS_PRIVATE(inode) || get_inode_sd_version(inode) == STAT_DATA_V1) return 0; + reiserfs_write_unlock(inode->i_sb); dir = open_xa_dir(inode, XATTR_REPLACE); if (IS_ERR(dir)) { err = PTR_ERR(dir); + reiserfs_write_lock(inode->i_sb); goto out; } else if (!dir->d_inode) { err = 0; + reiserfs_write_lock(inode->i_sb); goto out_dir; } - reiserfs_mutex_lock_nested_safe(&dir->d_inode->i_mutex, I_MUTEX_XATTR, - inode->i_sb); + mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_XATTR); + + reiserfs_write_lock(inode->i_sb); + buf.xadir = dir; err = reiserfs_readdir_dentry(dir, &buf, fill_with_dentries, &pos); while ((err == 0 || err == -ENOSPC) && buf.count) { From 0523676d3f3aa7edeea63cc3a1bc4dc612380a26 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 30 Dec 2009 05:56:08 +0100 Subject: [PATCH 0297/1626] reiserfs: Relax reiserfs lock while freeing the journal Keeping the reiserfs lock while freeing the journal on umount path triggers a lock inversion between bdev->bd_mutex and the reiserfs lock. We don't need the reiserfs lock at this stage. The filesystem is not usable anymore, and there are no more pending commits, everything got flushed (even this operation was done in parallel and didn't required the reiserfs lock from the current process). This fixes the following lockdep report: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-atom #172 ------------------------------------------------------- umount/3904 is trying to acquire lock: (&bdev->bd_mutex){+.+.+.}, at: [] __blkdev_put+0x22/0x160 but task is already holding lock: (&REISERFS_SB(s)->lock){+.+.+.}, at: [] reiserfs_write_lock+0x29/0x40 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&REISERFS_SB(s)->lock){+.+.+.}: [] __lock_acquire+0x11ff/0x19e0 [] lock_acquire+0x68/0x90 [] mutex_lock_nested+0x5b/0x340 [] reiserfs_write_lock_once+0x29/0x50 [] reiserfs_get_block+0x85/0x1620 [] do_mpage_readpage+0x1f0/0x6d0 [] mpage_readpages+0xc0/0x100 [] reiserfs_readpages+0x19/0x20 [] __do_page_cache_readahead+0x1bc/0x260 [] ra_submit+0x28/0x40 [] filemap_fault+0x40e/0x420 [] __do_fault+0x3d/0x430 [] handle_mm_fault+0x12e/0x790 [] do_page_fault+0x135/0x330 [] error_code+0x6b/0x70 [] load_elf_binary+0x82a/0x1a10 [] search_binary_handler+0x90/0x1d0 [] do_execve+0x1df/0x250 [] sys_execve+0x46/0x70 [] syscall_call+0x7/0xb -> #2 (&mm->mmap_sem){++++++}: [] __lock_acquire+0x11ff/0x19e0 [] lock_acquire+0x68/0x90 [] might_fault+0x8b/0xb0 [] copy_to_user+0x32/0x70 [] filldir64+0xa4/0xf0 [] sysfs_readdir+0x116/0x210 [] vfs_readdir+0x8d/0xb0 [] sys_getdents64+0x69/0xb0 [] sysenter_do_call+0x12/0x32 -> #1 (sysfs_mutex){+.+.+.}: [] __lock_acquire+0x11ff/0x19e0 [] lock_acquire+0x68/0x90 [] mutex_lock_nested+0x5b/0x340 [] sysfs_addrm_start+0x2c/0xb0 [] create_dir+0x40/0x90 [] sysfs_create_dir+0x2b/0x50 [] kobject_add_internal+0xc2/0x1b0 [] kobject_add_varg+0x31/0x50 [] kobject_add+0x2c/0x60 [] device_add+0x94/0x560 [] add_partition+0x18a/0x2a0 [] rescan_partitions+0x33a/0x450 [] __blkdev_get+0x12f/0x2d0 [] blkdev_get+0xa/0x10 [] register_disk+0x108/0x130 [] add_disk+0xd9/0x130 [] sd_probe_async+0x105/0x1d0 [] async_thread+0xcf/0x230 [] kthread+0x74/0x80 [] kernel_thread_helper+0x7/0x3c -> #0 (&bdev->bd_mutex){+.+.+.}: [] __lock_acquire+0x18f6/0x19e0 [] lock_acquire+0x68/0x90 [] mutex_lock_nested+0x5b/0x340 [] __blkdev_put+0x22/0x160 [] blkdev_put+0xa/0x10 [] free_journal_ram+0xd2/0x130 [] do_journal_release+0x98/0x190 [] journal_release+0xa/0x10 [] reiserfs_put_super+0x36/0x130 [] generic_shutdown_super+0x4f/0xe0 [] kill_block_super+0x25/0x40 [] reiserfs_kill_sb+0x7f/0x90 [] deactivate_super+0x7a/0x90 [] mntput_no_expire+0x98/0xd0 [] sys_umount+0x4c/0x310 [] sys_oldumount+0x19/0x20 [] sysenter_do_call+0x12/0x32 other info that might help us debug this: 2 locks held by umount/3904: #0: (&type->s_umount_key#30){+++++.}, at: [] deactivate_super+0x75/0x90 #1: (&REISERFS_SB(s)->lock){+.+.+.}, at: [] reiserfs_write_lock+0x29/0x40 stack backtrace: Pid: 3904, comm: umount Not tainted 2.6.32-atom #172 Call Trace: [] ? printk+0x18/0x1a [] print_circular_bug+0xca/0xd0 [] __lock_acquire+0x18f6/0x19e0 [] ? free_pcppages_bulk+0x1f/0x250 [] lock_acquire+0x68/0x90 [] ? __blkdev_put+0x22/0x160 [] ? __blkdev_put+0x22/0x160 [] mutex_lock_nested+0x5b/0x340 [] ? __blkdev_put+0x22/0x160 [] ? mark_held_locks+0x62/0x80 [] ? kfree+0x92/0xd0 [] __blkdev_put+0x22/0x160 [] ? trace_hardirqs_on+0xb/0x10 [] blkdev_put+0xa/0x10 [] free_journal_ram+0xd2/0x130 [] do_journal_release+0x98/0x190 [] journal_release+0xa/0x10 [] reiserfs_put_super+0x36/0x130 [] ? up_write+0x16/0x30 [] generic_shutdown_super+0x4f/0xe0 [] kill_block_super+0x25/0x40 [] ? vfs_quota_off+0x0/0x20 [] reiserfs_kill_sb+0x7f/0x90 [] deactivate_super+0x7a/0x90 [] mntput_no_expire+0x98/0xd0 [] sys_umount+0x4c/0x310 [] sys_oldumount+0x19/0x20 [] sysenter_do_call+0x12/0x32 Signed-off-by: Frederic Weisbecker Cc: Alexander Beregalov Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/journal.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index a059879667b1..83ac4d3b3cb0 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -2009,10 +2009,11 @@ static int do_journal_release(struct reiserfs_transaction_handle *th, destroy_workqueue(commit_wq); commit_wq = NULL; } - reiserfs_write_lock(sb); free_journal_ram(sb); + reiserfs_write_lock(sb); + return 0; } From 3f14fea6bbd3444dd46a2af3a2e219e792616645 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 30 Dec 2009 07:03:53 +0100 Subject: [PATCH 0298/1626] reiserfs: Relax lock before open xattr dir in reiserfs_xattr_set_handle() We call xattr_lookup() from reiserfs_xattr_get(). We then hold the reiserfs lock when we grab the i_mutex. But later, we may relax the reiserfs lock, creating dependency inversion between both locks. The lookups and creation jobs ar already protected by the inode mutex, so we can safely relax the reiserfs lock, dropping the unwanted reiserfs lock -> i_mutex dependency, as shown in the following lockdep report: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-atom #173 ------------------------------------------------------- cp/3204 is trying to acquire lock: (&REISERFS_SB(s)->lock){+.+.+.}, at: [] reiserfs_write_lock_once+0x29/0x50 but task is already holding lock: (&sb->s_type->i_mutex_key#4/3){+.+.+.}, at: [] open_xa_dir+0xd8/0x1b0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&sb->s_type->i_mutex_key#4/3){+.+.+.}: [] __lock_acquire+0x11ff/0x19e0 [] lock_acquire+0x68/0x90 [] mutex_lock_nested+0x5b/0x340 [] open_xa_dir+0x43/0x1b0 [] reiserfs_for_each_xattr+0x62/0x260 [] reiserfs_delete_xattrs+0x1a/0x60 [] reiserfs_delete_inode+0x9f/0x150 [] generic_delete_inode+0xa2/0x170 [] generic_drop_inode+0x4f/0x70 [] iput+0x47/0x50 [] do_unlinkat+0xd5/0x160 [] sys_unlink+0x10/0x20 [] sysenter_do_call+0x12/0x32 -> #0 (&REISERFS_SB(s)->lock){+.+.+.}: [] __lock_acquire+0x18f6/0x19e0 [] lock_acquire+0x68/0x90 [] mutex_lock_nested+0x5b/0x340 [] reiserfs_write_lock_once+0x29/0x50 [] reiserfs_lookup+0x62/0x140 [] __lookup_hash+0xef/0x110 [] lookup_one_len+0x8d/0xc0 [] open_xa_dir+0xea/0x1b0 [] xattr_lookup+0x15/0x160 [] reiserfs_xattr_get+0x56/0x2a0 [] reiserfs_get_acl+0xa2/0x360 [] reiserfs_cache_default_acl+0x3a/0x160 [] reiserfs_mkdir+0x6c/0x2c0 [] vfs_mkdir+0xd6/0x180 [] sys_mkdirat+0xc0/0xd0 [] sys_mkdir+0x20/0x30 [] sysenter_do_call+0x12/0x32 other info that might help us debug this: 2 locks held by cp/3204: #0: (&sb->s_type->i_mutex_key#4/1){+.+.+.}, at: [] lookup_create+0x26/0xa0 #1: (&sb->s_type->i_mutex_key#4/3){+.+.+.}, at: [] open_xa_dir+0xd8/0x1b0 stack backtrace: Pid: 3204, comm: cp Not tainted 2.6.32-atom #173 Call Trace: [] ? printk+0x18/0x1a [] print_circular_bug+0xca/0xd0 [] __lock_acquire+0x18f6/0x19e0 [] ? check_usage+0x6a/0x460 [] lock_acquire+0x68/0x90 [] ? reiserfs_write_lock_once+0x29/0x50 [] ? reiserfs_write_lock_once+0x29/0x50 [] mutex_lock_nested+0x5b/0x340 [] ? reiserfs_write_lock_once+0x29/0x50 [] reiserfs_write_lock_once+0x29/0x50 [] reiserfs_lookup+0x62/0x140 [] ? debug_check_no_locks_freed+0x8a/0x140 [] ? trace_hardirqs_on_caller+0x124/0x170 [] __lookup_hash+0xef/0x110 [] lookup_one_len+0x8d/0xc0 [] open_xa_dir+0xea/0x1b0 [] xattr_lookup+0x15/0x160 [] reiserfs_xattr_get+0x56/0x2a0 [] reiserfs_get_acl+0xa2/0x360 [] ? new_inode+0x27/0xa0 [] reiserfs_cache_default_acl+0x3a/0x160 [] ? _spin_unlock+0x27/0x40 [] reiserfs_mkdir+0x6c/0x2c0 [] ? __d_lookup+0x108/0x190 [] ? mark_held_locks+0x62/0x80 [] ? mutex_lock_nested+0x2bd/0x340 [] ? generic_permission+0x1a/0xa0 [] ? security_inode_permission+0x1e/0x20 [] vfs_mkdir+0xd6/0x180 [] sys_mkdirat+0xc0/0xd0 [] ? up_read+0x16/0x30 [] ? restore_all_notrace+0x0/0x18 [] sys_mkdir+0x20/0x30 [] sysenter_do_call+0x12/0x32 Signed-off-by: Frederic Weisbecker Tested-by: Christian Kujau Cc: Alexander Beregalov Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/xattr.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index c320c7792c75..78a3f246295c 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -485,11 +485,16 @@ reiserfs_xattr_set_handle(struct reiserfs_transaction_handle *th, if (!buffer) return lookup_and_delete_xattr(inode, name); + reiserfs_write_unlock(inode->i_sb); dentry = xattr_lookup(inode, name, flags); - if (IS_ERR(dentry)) + if (IS_ERR(dentry)) { + reiserfs_write_lock(inode->i_sb); return PTR_ERR(dentry); + } - reiserfs_down_read_safe(&REISERFS_I(inode)->i_xattr_sem, inode->i_sb); + down_read(&REISERFS_I(inode)->i_xattr_sem); + + reiserfs_write_lock(inode->i_sb); xahash = xattr_hash(buffer, buffer_size); while (buffer_pos < buffer_size || buffer_pos == 0) { From c674905ca74ad0ae5b048afb1ef68663a0d7e987 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 30 Dec 2009 07:12:03 +0100 Subject: [PATCH 0299/1626] reiserfs: Fix unwanted recursive reiserfs lock in reiserfs_unlink() reiserfs_unlink() may or may not be called under the reiserfs lock. But it also takes the reiserfs lock and can then acquire it recursively which leads to do_journal_begin_r() that fails to relax the reiserfs lock before grabbing the journal mutex, creating an unexpected lock inversion. We need to ensure reiserfs_unlink() won't get the reiserfs lock recursively using reiserfs_write_lock_once(). This fixes the following warning that precedes a lock inversion report (reiserfs lock <-> journal mutex). ------------[ cut here ]------------ WARNING: at fs/reiserfs/lock.c:95 reiserfs_lock_check_recursive+0x3a/0x50() Hardware name: MS-7418 Unwanted recursive reiserfs lock! Pid: 3208, comm: dbench Not tainted 2.6.32-atom #177 Call Trace: [] ? reiserfs_lock_check_recursive+0x3a/0x50 [] ? reiserfs_lock_check_recursive+0x3a/0x50 [] warn_slowpath_common+0x67/0xc0 [] ? reiserfs_lock_check_recursive+0x3a/0x50 [] warn_slowpath_fmt+0x26/0x30 [] reiserfs_lock_check_recursive+0x3a/0x50 [] do_journal_begin_r+0x83/0x360 [] ? __lock_acquire+0x1296/0x19e0 [] ? xattr_unlink+0x57/0xb0 [] journal_begin+0x80/0x130 [] reiserfs_unlink+0x7d/0x2d0 [] ? xattr_unlink+0x57/0xb0 [] ? xattr_unlink+0x57/0xb0 [] ? xattr_unlink+0x57/0xb0 [] xattr_unlink+0x64/0xb0 [] delete_one_xattr+0x29/0x100 [] reiserfs_for_each_xattr+0x10b/0x290 [] ? delete_one_xattr+0x0/0x100 [] ? mutex_lock_nested+0x299/0x340 [] reiserfs_delete_xattrs+0x1a/0x60 [] ? reiserfs_write_lock_once+0x29/0x50 [] reiserfs_delete_inode+0x9f/0x150 [] ? _atomic_dec_and_lock+0x4f/0x70 [] ? reiserfs_delete_inode+0x0/0x150 [] generic_delete_inode+0xa2/0x170 [] generic_drop_inode+0x4f/0x70 [] iput+0x47/0x50 [] do_unlinkat+0xd5/0x160 [] ? up_read+0x16/0x30 [] ? do_page_fault+0x187/0x330 [] ? restore_all_notrace+0x0/0x18 [] ? do_page_fault+0x0/0x330 [] ? trace_hardirqs_on_caller+0x124/0x170 [] sys_unlink+0x10/0x20 [] sysenter_do_call+0x12/0x32 ---[ end trace 2e35d71a6cc69d0c ]--- Signed-off-by: Frederic Weisbecker Tested-by: Christian Kujau Cc: Alexander Beregalov Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/namei.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c index e296ff72a6cc..9d4dcf0b07cb 100644 --- a/fs/reiserfs/namei.c +++ b/fs/reiserfs/namei.c @@ -921,6 +921,7 @@ static int reiserfs_unlink(struct inode *dir, struct dentry *dentry) struct reiserfs_transaction_handle th; int jbegin_count; unsigned long savelink; + int depth; inode = dentry->d_inode; @@ -932,7 +933,7 @@ static int reiserfs_unlink(struct inode *dir, struct dentry *dentry) JOURNAL_PER_BALANCE_CNT * 2 + 2 + 4 * REISERFS_QUOTA_TRANS_BLOCKS(dir->i_sb); - reiserfs_write_lock(dir->i_sb); + depth = reiserfs_write_lock_once(dir->i_sb); retval = journal_begin(&th, dir->i_sb, jbegin_count); if (retval) goto out_unlink; @@ -993,7 +994,7 @@ static int reiserfs_unlink(struct inode *dir, struct dentry *dentry) retval = journal_end(&th, dir->i_sb, jbegin_count); reiserfs_check_path(&path); - reiserfs_write_unlock(dir->i_sb); + reiserfs_write_unlock_once(dir->i_sb, depth); return retval; end_unlink: @@ -1003,7 +1004,7 @@ static int reiserfs_unlink(struct inode *dir, struct dentry *dentry) if (err) retval = err; out_unlink: - reiserfs_write_unlock(dir->i_sb); + reiserfs_write_unlock_once(dir->i_sb, depth); return retval; } From 4dd859697f836cf62c8de08bd9a9f4b4f4beaa91 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 30 Dec 2009 07:26:28 +0100 Subject: [PATCH 0300/1626] reiserfs: Fix journal mutex <-> inode mutex lock inversion We need to relax the reiserfs lock before locking the inode mutex from xattr_unlink(), otherwise we'll face the usual bad dependencies: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-atom #178 ------------------------------------------------------- rm/3202 is trying to acquire lock: (&journal->j_mutex){+.+...}, at: [] do_journal_begin_r+0x94/0x360 but task is already holding lock: (&sb->s_type->i_mutex_key#4/2){+.+...}, at: [] xattr_unlink+0x57/0xb0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sb->s_type->i_mutex_key#4/2){+.+...}: [] __lock_acquire+0x11ff/0x19e0 [] lock_acquire+0x68/0x90 [] mutex_lock_nested+0x5b/0x340 [] xattr_unlink+0x57/0xb0 [] delete_one_xattr+0x29/0x100 [] reiserfs_for_each_xattr+0x10b/0x290 [] reiserfs_delete_xattrs+0x1a/0x60 [] reiserfs_delete_inode+0x9f/0x150 [] generic_delete_inode+0xa2/0x170 [] generic_drop_inode+0x4f/0x70 [] iput+0x47/0x50 [] do_unlinkat+0xd5/0x160 [] sys_unlinkat+0x23/0x40 [] sysenter_do_call+0x12/0x32 -> #1 (&REISERFS_SB(s)->lock){+.+.+.}: [] __lock_acquire+0x11ff/0x19e0 [] lock_acquire+0x68/0x90 [] mutex_lock_nested+0x5b/0x340 [] reiserfs_write_lock+0x29/0x40 [] do_journal_begin_r+0x9c/0x360 [] journal_begin+0x80/0x130 [] reiserfs_remount+0x223/0x4e0 [] do_remount_sb+0xa6/0x140 [] do_mount+0x560/0x750 [] sys_mount+0x84/0xb0 [] sysenter_do_call+0x12/0x32 -> #0 (&journal->j_mutex){+.+...}: [] __lock_acquire+0x18f6/0x19e0 [] lock_acquire+0x68/0x90 [] mutex_lock_nested+0x5b/0x340 [] do_journal_begin_r+0x94/0x360 [] journal_begin+0x80/0x130 [] reiserfs_unlink+0x83/0x2e0 [] xattr_unlink+0x64/0xb0 [] delete_one_xattr+0x29/0x100 [] reiserfs_for_each_xattr+0x10b/0x290 [] reiserfs_delete_xattrs+0x1a/0x60 [] reiserfs_delete_inode+0x9f/0x150 [] generic_delete_inode+0xa2/0x170 [] generic_drop_inode+0x4f/0x70 [] iput+0x47/0x50 [] do_unlinkat+0xd5/0x160 [] sys_unlinkat+0x23/0x40 [] sysenter_do_call+0x12/0x32 other info that might help us debug this: 2 locks held by rm/3202: #0: (&sb->s_type->i_mutex_key#4/3){+.+.+.}, at: [] reiserfs_for_each_xattr+0x9b/0x290 #1: (&sb->s_type->i_mutex_key#4/2){+.+...}, at: [] xattr_unlink+0x57/0xb0 stack backtrace: Pid: 3202, comm: rm Not tainted 2.6.32-atom #178 Call Trace: [] ? printk+0x18/0x1a [] print_circular_bug+0xca/0xd0 [] __lock_acquire+0x18f6/0x19e0 [] ? xattr_unlink+0x57/0xb0 [] lock_acquire+0x68/0x90 [] ? do_journal_begin_r+0x94/0x360 [] ? do_journal_begin_r+0x94/0x360 [] mutex_lock_nested+0x5b/0x340 [] ? do_journal_begin_r+0x94/0x360 [] do_journal_begin_r+0x94/0x360 [] ? run_timer_softirq+0x1a6/0x220 [] ? __do_softirq+0x50/0x140 [] journal_begin+0x80/0x130 [] ? __do_softirq+0xf2/0x140 [] ? hrtimer_interrupt+0xdf/0x220 [] reiserfs_unlink+0x83/0x2e0 [] ? mark_held_locks+0x62/0x80 [] ? trace_hardirqs_on_thunk+0xc/0x10 [] ? restore_all_notrace+0x0/0x18 [] ? xattr_unlink+0x57/0xb0 [] xattr_unlink+0x64/0xb0 [] delete_one_xattr+0x29/0x100 [] reiserfs_for_each_xattr+0x10b/0x290 [] ? delete_one_xattr+0x0/0x100 [] ? mutex_lock_nested+0x299/0x340 [] reiserfs_delete_xattrs+0x1a/0x60 [] ? reiserfs_write_lock_once+0x29/0x50 [] reiserfs_delete_inode+0x9f/0x150 [] ? _atomic_dec_and_lock+0x4f/0x70 [] ? reiserfs_delete_inode+0x0/0x150 [] generic_delete_inode+0xa2/0x170 [] generic_drop_inode+0x4f/0x70 [] iput+0x47/0x50 [] do_unlinkat+0xd5/0x160 [] ? mutex_unlock+0x8/0x10 [] ? vfs_readdir+0x7d/0xb0 [] ? filldir64+0x0/0xf0 [] ? sysenter_exit+0xf/0x16 [] ? trace_hardirqs_on_caller+0x124/0x170 [] sys_unlinkat+0x23/0x40 [] sysenter_do_call+0x12/0x32 Signed-off-by: Frederic Weisbecker Tested-by: Christian Kujau Cc: Alexander Beregalov Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/xattr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 78a3f246295c..8b9631d30ffc 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -82,7 +82,8 @@ static int xattr_unlink(struct inode *dir, struct dentry *dentry) BUG_ON(!mutex_is_locked(&dir->i_mutex)); vfs_dq_init(dir); - mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD); + reiserfs_mutex_lock_nested_safe(&dentry->d_inode->i_mutex, + I_MUTEX_CHILD, dir->i_sb); error = dir->i_op->unlink(dir, dentry); mutex_unlock(&dentry->d_inode->i_mutex); From 8b513f56d4e117f11cf0760abcc030eedefc45c3 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 30 Dec 2009 07:28:58 +0100 Subject: [PATCH 0301/1626] reiserfs: Safely acquire i_mutex from reiserfs_for_each_xattr Relax the reiserfs lock before taking the inode mutex from reiserfs_for_each_xattr() to avoid the usual bad dependencies: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-atom #179 ------------------------------------------------------- rm/3242 is trying to acquire lock: (&sb->s_type->i_mutex_key#4/3){+.+.+.}, at: [] reiserfs_for_each_xattr+0x23f/0x290 but task is already holding lock: (&REISERFS_SB(s)->lock){+.+.+.}, at: [] reiserfs_write_lock+0x29/0x40 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&REISERFS_SB(s)->lock){+.+.+.}: [] __lock_acquire+0x11ff/0x19e0 [] lock_acquire+0x68/0x90 [] mutex_lock_nested+0x5b/0x340 [] reiserfs_write_lock_once+0x29/0x50 [] reiserfs_lookup+0x62/0x140 [] __lookup_hash+0xef/0x110 [] lookup_one_len+0x8d/0xc0 [] open_xa_dir+0xea/0x1b0 [] reiserfs_for_each_xattr+0x70/0x290 [] reiserfs_delete_xattrs+0x1a/0x60 [] reiserfs_delete_inode+0x9f/0x150 [] generic_delete_inode+0xa2/0x170 [] generic_drop_inode+0x4f/0x70 [] iput+0x47/0x50 [] do_unlinkat+0xd5/0x160 [] sys_unlinkat+0x23/0x40 [] sysenter_do_call+0x12/0x32 -> #0 (&sb->s_type->i_mutex_key#4/3){+.+.+.}: [] __lock_acquire+0x18f6/0x19e0 [] lock_acquire+0x68/0x90 [] mutex_lock_nested+0x5b/0x340 [] reiserfs_for_each_xattr+0x23f/0x290 [] reiserfs_delete_xattrs+0x1a/0x60 [] reiserfs_delete_inode+0x9f/0x150 [] generic_delete_inode+0xa2/0x170 [] generic_drop_inode+0x4f/0x70 [] iput+0x47/0x50 [] do_unlinkat+0xd5/0x160 [] sys_unlinkat+0x23/0x40 [] sysenter_do_call+0x12/0x32 other info that might help us debug this: 1 lock held by rm/3242: #0: (&REISERFS_SB(s)->lock){+.+.+.}, at: [] reiserfs_write_lock+0x29/0x40 stack backtrace: Pid: 3242, comm: rm Not tainted 2.6.32-atom #179 Call Trace: [] ? printk+0x18/0x1a [] print_circular_bug+0xca/0xd0 [] __lock_acquire+0x18f6/0x19e0 [] ? mark_held_locks+0x62/0x80 [] ? trace_hardirqs_on+0xb/0x10 [] ? mutex_unlock+0x8/0x10 [] lock_acquire+0x68/0x90 [] ? reiserfs_for_each_xattr+0x23f/0x290 [] ? reiserfs_for_each_xattr+0x23f/0x290 [] mutex_lock_nested+0x5b/0x340 [] ? reiserfs_for_each_xattr+0x23f/0x290 [] reiserfs_for_each_xattr+0x23f/0x290 [] ? delete_one_xattr+0x0/0x100 [] reiserfs_delete_xattrs+0x1a/0x60 [] ? reiserfs_write_lock_once+0x29/0x50 [] reiserfs_delete_inode+0x9f/0x150 [] ? _atomic_dec_and_lock+0x4f/0x70 [] ? reiserfs_delete_inode+0x0/0x150 [] generic_delete_inode+0xa2/0x170 [] generic_drop_inode+0x4f/0x70 [] iput+0x47/0x50 [] do_unlinkat+0xd5/0x160 [] ? mutex_unlock+0x8/0x10 [] ? vfs_readdir+0x7d/0xb0 [] ? filldir64+0x0/0xf0 [] ? sysenter_exit+0xf/0x16 [] ? trace_hardirqs_on_caller+0x124/0x170 [] sys_unlinkat+0x23/0x40 [] sysenter_do_call+0x12/0x32 Signed-off-by: Frederic Weisbecker Tested-by: Christian Kujau Cc: Alexander Beregalov Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/xattr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 8b9631d30ffc..bfdac66fd8e2 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -289,8 +289,9 @@ static int reiserfs_for_each_xattr(struct inode *inode, err = journal_begin(&th, inode->i_sb, blocks); if (!err) { int jerror; - mutex_lock_nested(&dir->d_parent->d_inode->i_mutex, - I_MUTEX_XATTR); + reiserfs_mutex_lock_nested_safe( + &dir->d_parent->d_inode->i_mutex, + I_MUTEX_XATTR, inode->i_sb); err = action(dir, data); jerror = journal_end(&th, inode->i_sb, blocks); mutex_unlock(&dir->d_parent->d_inode->i_mutex); From 835d5247d98f46e35d007dcfa6215e526ca33360 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 30 Dec 2009 07:40:39 +0100 Subject: [PATCH 0302/1626] reiserfs: Safely acquire i_mutex from xattr_rmdir Relax the reiserfs lock before taking the inode mutex from xattr_rmdir() to avoid the usual reiserfs lock <-> inode mutex bad dependency. Signed-off-by: Frederic Weisbecker Tested-by: Christian Kujau Cc: Alexander Beregalov Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/xattr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index bfdac66fd8e2..9623cfe2371c 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -98,7 +98,8 @@ static int xattr_rmdir(struct inode *dir, struct dentry *dentry) BUG_ON(!mutex_is_locked(&dir->i_mutex)); vfs_dq_init(dir); - mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD); + reiserfs_mutex_lock_nested_safe(&dentry->d_inode->i_mutex, + I_MUTEX_CHILD, dir->i_sb); dentry_unhash(dentry); error = dir->i_op->rmdir(dir, dentry); if (!error) From abf2a117c67a67fbb611913a31109d0ff66ab073 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 1 Jan 2010 18:35:11 -0800 Subject: [PATCH 0303/1626] Input: gf2k - fix &&/|| confusion in gf2k_connect() This always evaluates to true. Signed-off-by: Roel Kluin Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/gf2k.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c index 67c207f5b1a1..45ac70eae0aa 100644 --- a/drivers/input/joystick/gf2k.c +++ b/drivers/input/joystick/gf2k.c @@ -277,7 +277,7 @@ static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv) } #ifdef RESET_WORKS - if ((gf2k->id != (GB(19,2,0) | GB(15,3,2) | GB(12,3,5))) || + if ((gf2k->id != (GB(19,2,0) | GB(15,3,2) | GB(12,3,5))) && (gf2k->id != (GB(31,2,0) | GB(27,3,2) | GB(24,3,5)))) { err = -ENODEV; goto fail2; From 6aff43f817ddc54fcd6f0215bfba5d334b0bbbbd Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sat, 2 Jan 2010 21:41:53 +0900 Subject: [PATCH 0304/1626] nilfs2: update mailing list address This replaces the list address for nilfs discussion to linux-nilfs at vger.kernel.org from users at nilfs.org. Signed-off-by: Ryusuke Konishi --- Documentation/filesystems/nilfs2.txt | 2 +- MAINTAINERS | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt index 4949fcaa6b6a..839efd8a8a8c 100644 --- a/Documentation/filesystems/nilfs2.txt +++ b/Documentation/filesystems/nilfs2.txt @@ -28,7 +28,7 @@ described in the man pages included in the package. Project web page: http://www.nilfs.org/en/ Download page: http://www.nilfs.org/en/download.html Git tree web page: http://www.nilfs.org/git/ -NILFS mailing lists: http://www.nilfs.org/mailman/listinfo/users +List info: http://vger.kernel.org/vger-lists.html#linux-nilfs Caveats ======= diff --git a/MAINTAINERS b/MAINTAINERS index 66f5f7dab285..0121c61d67d5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3882,7 +3882,7 @@ F: drivers/net/ni5010.* NILFS2 FILESYSTEM M: KONISHI Ryusuke -L: users@nilfs.org +L: linux-nilfs@vger.kernel.org W: http://www.nilfs.org/en/ S: Supported F: Documentation/filesystems/nilfs2.txt From 4b6764fa9e25cf628e42bbd192eca1e0b8e59061 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 1 Jan 2010 20:35:23 -0800 Subject: [PATCH 0305/1626] writeback: add missing kernel-doc notation Fix the following htmldocs warning: Warning(fs/fs-writeback.c:255): No description found for parameter 'sb' Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Randy Dunlap Acked-by: Wu Fengguang Cc: Peter Zijlstra Cc: Jan Kara Cc: Jens Axboe Signed-off-by: Linus Torvalds --- fs/fs-writeback.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index f6c2155e0026..1a7c42c64ff4 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -242,6 +242,7 @@ static void bdi_sync_writeback(struct backing_dev_info *bdi, /** * bdi_start_writeback - start writeback * @bdi: the backing device to write from + * @sb: write inodes from this super_block * @nr_pages: the number of pages to write * * Description: From 143724fd3d3c154009fe95846dcbf7afadca8ab1 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 1 Jan 2010 20:35:41 -0800 Subject: [PATCH 0306/1626] Documentation: fix ioremap return type ioremap() returns a void __iomem * not a char *. Update the documentation file to reflect this. Signed-off-by: H Hartley Sweeten Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/IO-mapping.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/IO-mapping.txt b/Documentation/IO-mapping.txt index 78a440695e11..1b5aa10df845 100644 --- a/Documentation/IO-mapping.txt +++ b/Documentation/IO-mapping.txt @@ -157,7 +157,7 @@ For such memory, you can do things like * access only the 640k-1MB area, so anything else * has to be remapped. */ - char * baseptr = ioremap(0xFC000000, 1024*1024); + void __iomem *baseptr = ioremap(0xFC000000, 1024*1024); /* write a 'A' to the offset 10 of the area */ writeb('A',baseptr+10); From 8d9f99c335ef66e4c44afe8f61816b0edeafba91 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 1 Jan 2010 20:35:54 -0800 Subject: [PATCH 0307/1626] DocBook: fix ioremap return type ioremap() returns a void __iomem * not an unsigned long. Update the Documentation file to reflect this. Signed-off-by: H Hartley Sweeten Signed-off-by: Randy Dunlap Cc: David Woodhouse Signed-off-by: Linus Torvalds --- Documentation/DocBook/mtdnand.tmpl | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index f508a8a27fea..5e7d84b48505 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -174,7 +174,7 @@ static struct mtd_info *board_mtd; -static unsigned long baseaddr; +static void __iomem *baseaddr; Static example @@ -182,7 +182,7 @@ static unsigned long baseaddr; static struct mtd_info board_mtd; static struct nand_chip board_chip; -static unsigned long baseaddr; +static void __iomem *baseaddr; @@ -283,8 +283,8 @@ int __init board_init (void) } /* map physical address */ - baseaddr = (unsigned long)ioremap(CHIP_PHYSICAL_ADDRESS, 1024); - if(!baseaddr){ + baseaddr = ioremap(CHIP_PHYSICAL_ADDRESS, 1024); + if (!baseaddr) { printk("Ioremap to access NAND chip failed\n"); err = -EIO; goto out_mtd; @@ -316,7 +316,7 @@ int __init board_init (void) goto out; out_ior: - iounmap((void *)baseaddr); + iounmap(baseaddr); out_mtd: kfree (board_mtd); out: @@ -341,7 +341,7 @@ static void __exit board_cleanup (void) nand_release (board_mtd); /* unmap physical address */ - iounmap((void *)baseaddr); + iounmap(baseaddr); /* Free the MTD device structure */ kfree (board_mtd); From 4207a152bc242effd0b8231143aa5b9f7a1593a9 Mon Sep 17 00:00:00 2001 From: Kusanagi Kouichi Date: Fri, 1 Jan 2010 20:36:09 -0800 Subject: [PATCH 0308/1626] Documentation: Rename Documentation/DMA-mapping.txt It seems that Documentation/DMA-mapping.txt was supposed to be renamed to Documentation/PCI/PCI-DMA-mapping.txt. Signed-off-by: Kusanagi Kouichi Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/{DMA-mapping.txt => PCI/PCI-DMA-mapping.txt} | 0 Documentation/block/biodoc.txt | 2 +- 2 files changed, 1 insertion(+), 1 deletion(-) rename Documentation/{DMA-mapping.txt => PCI/PCI-DMA-mapping.txt} (100%) diff --git a/Documentation/DMA-mapping.txt b/Documentation/PCI/PCI-DMA-mapping.txt similarity index 100% rename from Documentation/DMA-mapping.txt rename to Documentation/PCI/PCI-DMA-mapping.txt diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 8d2158a1c6aa..6fab97ea7e6b 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address do not have a corresponding kernel virtual address space mapping) and low-memory pages. -Note: Please refer to Documentation/DMA-mapping.txt for a discussion +Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion on PCI high mem DMA aspects and mapping of scatter gather lists, and support for 64 bit PCI. From f3e22f48f37c1e14441c9f72ca8e63b1d4516745 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Sun, 3 Jan 2010 03:44:53 +0100 Subject: [PATCH 0309/1626] reiserfs: Fix mistake in down_write() conversion Fix a mistake in commit 0719d3434747889b314a1e8add776418c4148bcf (reiserfs: Fix reiserfs lock <-> i_xattr_sem dependency inversion) that has converted a down_write() into a down_read() accidentally. Signed-off-by: Frederic Weisbecker Cc: Christian Kujau Cc: Alexander Beregalov Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/xattr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 9623cfe2371c..75d3706734ec 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -495,7 +495,7 @@ reiserfs_xattr_set_handle(struct reiserfs_transaction_handle *th, return PTR_ERR(dentry); } - down_read(&REISERFS_I(inode)->i_xattr_sem); + down_write(&REISERFS_I(inode)->i_xattr_sem); reiserfs_write_lock(inode->i_sb); From b4e2a2a2f39cc21ed898217ae2d256706723fabb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Jan 2010 11:13:54 +0900 Subject: [PATCH 0310/1626] sh: Disable PMB for SH4AL-DSP CPUs. While the PMB is available on SH-4A parts, SH4AL-DSP parts exclude it altogether. As such, explicitly disable PMB support for these parts. If this changes in the future for newer subtypes, this will have to be made more fine-grained. Signed-off-by: Paul Mundt --- arch/sh/mm/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 0e7ba8e891cf..191d6d83151a 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -82,7 +82,7 @@ config 32BIT config PMB_ENABLE bool "Support 32-bit physical addressing through PMB" - depends on MMU && EXPERIMENTAL && CPU_SH4A + depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP default y help If you say Y here, physical addressing will be extended to @@ -96,7 +96,7 @@ choice config PMB bool "PMB" - depends on MMU && EXPERIMENTAL && CPU_SH4A + depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP help If you say Y here, physical addressing will be extended to 32-bits through the SH-4A PMB. If this is not set, legacy @@ -104,7 +104,7 @@ config PMB config PMB_FIXED bool "fixed PMB" - depends on MMU && EXPERIMENTAL && CPU_SH4A + depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP select 32BIT help If this option is enabled, fixed PMB mappings are inherited From 5e9daa0f26d69d22ffe8efeaba6932ea6ef01ec4 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Jan 2010 11:16:33 +0900 Subject: [PATCH 0311/1626] sh: Don't default enable PMB support. This has the adverse effect of converting many 29bit configs to 32bit mode, while this is a change that needs to be done manually for each platform. Turn it off by default in order to cut down on spurious bug reports. Signed-off-by: Paul Mundt --- arch/sh/mm/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 191d6d83151a..986a71b88ca3 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -83,7 +83,6 @@ config 32BIT config PMB_ENABLE bool "Support 32-bit physical addressing through PMB" depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP - default y help If you say Y here, physical addressing will be extended to 32-bits through the SH-4A PMB. If this is not set, legacy From 2d51a521e64f91e42424b291fcae49d4d3f63d88 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 4 Jan 2010 11:42:01 +0800 Subject: [PATCH 0312/1626] [ARM] pxa: update pwm_backlight->notify() to include missed 'struct device *' Signed-off-by: Eric Miao --- arch/arm/mach-pxa/magician.c | 2 +- arch/arm/mach-pxa/palmld.c | 2 +- arch/arm/mach-pxa/palmt5.c | 2 +- arch/arm/mach-pxa/palmtc.c | 2 +- arch/arm/mach-pxa/palmte2.c | 2 +- arch/arm/mach-pxa/palmtreo.c | 2 +- arch/arm/mach-pxa/palmtx.c | 2 +- arch/arm/mach-pxa/palmz72.c | 2 +- arch/arm/mach-pxa/viper.c | 2 +- 9 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 8a38d604dc77..189f330719a2 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -381,7 +381,7 @@ err: return ret; } -static int magician_backlight_notify(int brightness) +static int magician_backlight_notify(struct device *dev, int brightness) { gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness); if (brightness >= 200) { diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 59140217890a..e100af78b166 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -270,7 +270,7 @@ err: return ret; } -static int palmld_backlight_notify(int brightness) +static int palmld_backlight_notify(struct device *dev, int brightness) { gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness); gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness); diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 7f89ca20f13a..8fe3ec27568f 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -209,7 +209,7 @@ err: return ret; } -static int palmt5_backlight_notify(int brightness) +static int palmt5_backlight_notify(struct device *dev, int brightness) { gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness); gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness); diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 308417592007..b992f07ece21 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -185,7 +185,7 @@ err: return ret; } -static int palmtc_backlight_notify(int brightness) +static int palmtc_backlight_notify(struct device *dev, int brightness) { /* backlight is on when GPIO16 AF0 is high */ gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness); diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 265d62bae7de..dc728d6ab94e 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -181,7 +181,7 @@ err: return ret; } -static int palmte2_backlight_notify(int brightness) +static int palmte2_backlight_notify(struct device *dev, int brightness) { gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness); gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness); diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 606eb7e8a17e..b433bb496711 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -375,7 +375,7 @@ err: return ret; } -static int treo_backlight_notify(int brightness) +static int treo_backlight_notify(struct device *dev, int brightness) { gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness); return TREO_MAX_INTENSITY - brightness; diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 7bf18c2f002f..b37a025c0b7b 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -269,7 +269,7 @@ err: return ret; } -static int palmtx_backlight_notify(int brightness) +static int palmtx_backlight_notify(struct device *dev, int brightness) { gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness); gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness); diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index d787ac7cfdd8..1c5d68a94511 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -196,7 +196,7 @@ err: return ret; } -static int palmz72_backlight_notify(int brightness) +static int palmz72_backlight_notify(struct device *dev, int brightness) { gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness); gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness); diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 5352b4e5a7dd..89f258c9e126 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -379,7 +379,7 @@ err_request_bckl: return ret; } -static int viper_backlight_notify(int brightness) +static int viper_backlight_notify(struct device *dev, int brightness) { gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness); gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness); From 35bb5cadc8c7b1462df57e32e08d964f1be7a75c Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 14 Dec 2009 16:05:09 +0000 Subject: [PATCH 0313/1626] via-velocity: Give RX descriptors to the NIC later on open or MTU change velocity_open() calls velocity_give_many_rx_descs(), which gives RX descriptors to the NIC, before installing an interrupt handler or calling velocity_init_registers(). I think this is very unsafe and it appears to explain the bug report . On MTU change, velocity_give_many_rx_descs() is again called before velocity_init_registers(). I'm not sure whether this is unsafe but it does look wrong. Therefore, move the calls to velocity_give_many_rx_descs() after request_irq() and velocity_init_registers(). Signed-off-by: Ben Hutchings Tested-by: Jan Ceuleers Signed-off-by: David S. Miller --- drivers/net/via-velocity.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 4ceb441f2687..c93f58f5c6f2 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -2237,8 +2237,6 @@ static int velocity_open(struct net_device *dev) /* Ensure chip is running */ pci_set_power_state(vptr->pdev, PCI_D0); - velocity_give_many_rx_descs(vptr); - velocity_init_registers(vptr, VELOCITY_INIT_COLD); ret = request_irq(vptr->pdev->irq, velocity_intr, IRQF_SHARED, @@ -2250,6 +2248,8 @@ static int velocity_open(struct net_device *dev) goto out; } + velocity_give_many_rx_descs(vptr); + mac_enable_int(vptr->mac_regs); netif_start_queue(dev); napi_enable(&vptr->napi); @@ -2339,10 +2339,10 @@ static int velocity_change_mtu(struct net_device *dev, int new_mtu) dev->mtu = new_mtu; - velocity_give_many_rx_descs(vptr); - velocity_init_registers(vptr, VELOCITY_INIT_COLD); + velocity_give_many_rx_descs(vptr); + mac_enable_int(vptr->mac_regs); netif_start_queue(dev); From 1f731b63752dac76ff4dbf568a08ff2e3663316f Mon Sep 17 00:00:00 2001 From: Bernard Pidoux F6BVP Date: Thu, 17 Dec 2009 05:25:18 +0000 Subject: [PATCH 0314/1626] rose_loopback_timer sets VC number <= ROSE_DEFAULT_MAXVC cat /proc/net/rose displayed a rose sockets abnormal lci value, i.e. greater than maximum number of VCs per neighbour allowed. This number prevents further test of lci value during rose operations. Example (lines shortened) : [bernard]# cat /proc/net/rose dest_addr dest_call src_addr src_call dev lci neigh st vs vr va * * 2080175520 F6BVP-1 rose0 000 00000 0 0 0 0 2080175520 FPAD-0 2080175520 WP-0 rose0 FFE 00001 3 0 0 0 Here are the default parameters : linux/include/net/rose.h:#define ROSE_DEFAULT_MAXVC 50 /* Maximum number of VCs per neighbour */ linux/net/rose/af_rose.c:int sysctl_rose_maximum_vcs = ROSE_DEFAULT_MAXVC; With the following patch, rose_loopback_timer() attributes a VC number within limits. Signed-off-by: Bernard Pidoux Signed-off-by: David S. Miller --- net/rose/rose_loopback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/rose/rose_loopback.c b/net/rose/rose_loopback.c index 114df6eec8c3..968e8bac1b5d 100644 --- a/net/rose/rose_loopback.c +++ b/net/rose/rose_loopback.c @@ -75,7 +75,7 @@ static void rose_loopback_timer(unsigned long param) lci_i = ((skb->data[0] << 8) & 0xF00) + ((skb->data[1] << 0) & 0x0FF); frametype = skb->data[2]; dest = (rose_address *)(skb->data + 4); - lci_o = 0xFFF - lci_i; + lci_o = ROSE_DEFAULT_MAXVC + 1 - lci_i; skb_reset_transport_header(skb); From 8ffd32083c849dcf476e56e6c5f728c80797ecdd Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 21 Dec 2009 14:25:06 +0000 Subject: [PATCH 0315/1626] net/sctp/socket.c: squish warning net/sctp/socket.c: In function 'sctp_setsockopt_autoclose': net/sctp/socket.c:2090: warning: comparison is always false due to limited range of data type Cc: Andrei Pelinescu-Onciul Cc: Vlad Yasevich Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- net/sctp/socket.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 89ab66e54740..67fdac9d2d33 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -2087,8 +2087,7 @@ static int sctp_setsockopt_autoclose(struct sock *sk, char __user *optval, if (copy_from_user(&sp->autoclose, optval, optlen)) return -EFAULT; /* make sure it won't exceed MAX_SCHEDULE_TIMEOUT */ - if (sp->autoclose > (MAX_SCHEDULE_TIMEOUT / HZ) ) - sp->autoclose = (__u32)(MAX_SCHEDULE_TIMEOUT / HZ) ; + sp->autoclose = min_t(long, sp->autoclose, MAX_SCHEDULE_TIMEOUT / HZ); return 0; } From 073bd90f03d98bc3168865f21573c9b232777c13 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 21 Dec 2009 14:25:32 +0000 Subject: [PATCH 0316/1626] drivers/isdn: eliminate duplicated test The code checked slot_rx twice. Check slot_tx by analogy with the bank case. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression E; @@ ( *E && E | *E || E ) // Signed-off-by: Julia Lawall Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hardware/mISDN/hfcmulti.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index a6624ad252c5..1a1420d7a828 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -3152,7 +3152,7 @@ static void hfcmulti_pcm(struct hfc_multi *hc, int ch, int slot_tx, int bank_tx, int slot_rx, int bank_rx) { - if (slot_rx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) { + if (slot_tx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) { /* disable PCM */ mode_hfcmulti(hc, ch, hc->chan[ch].protocol, -1, 0, -1, 0); return; From ce739b473ce12d5ef067b39b8637bfd2b2174a15 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 27 Dec 2009 11:27:44 +0000 Subject: [PATCH 0317/1626] drivers/net/can: Correct NULL test Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,y; statement S; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // Signed-off-by: Julia Lawall Acked-by: Oliver Hartkopp Signed-off-by: David S. Miller --- drivers/net/can/mcp251x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c index 9c5a1537939c..1a72ca066a17 100644 --- a/drivers/net/can/mcp251x.c +++ b/drivers/net/can/mcp251x.c @@ -990,7 +990,7 @@ static int __devinit mcp251x_can_probe(struct spi_device *spi) goto error_tx_buf; } priv->spi_rx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL); - if (!priv->spi_tx_buf) { + if (!priv->spi_rx_buf) { ret = -ENOMEM; goto error_rx_buf; } From c064efca9211d12bb9e6de8718fc39884eb883f2 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Sun, 27 Dec 2009 11:22:08 +0000 Subject: [PATCH 0318/1626] usbnet: test off by one With `while (i++ < MII_TIMEOUT)' i reaches MII_TIMEOUT + 1 after the loop This is probably unlikely a problem in practice. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/usb/rtl8150.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index f14d225404da..fd19db0d2504 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -270,7 +270,7 @@ static int read_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 * reg) get_registers(dev, PHYCNT, 1, data); } while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT)); - if (i < MII_TIMEOUT) { + if (i <= MII_TIMEOUT) { get_registers(dev, PHYDAT, 2, data); *reg = data[0] | (data[1] << 8); return 0; @@ -295,7 +295,7 @@ static int write_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 reg) get_registers(dev, PHYCNT, 1, data); } while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT)); - if (i < MII_TIMEOUT) + if (i <= MII_TIMEOUT) return 0; else return 1; From f65d1f082c8fb1bfae3f2cb51ec270da9b6366cf Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 28 Dec 2009 06:54:55 +0000 Subject: [PATCH 0319/1626] hamradio: avoid null deref v3 This should address the problems in version 1 (lazy) and version 2 (ugly). Bump the stats on orig_dev not on the newly assigned NULL dev variable. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/hamradio/bpqether.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c index ae5f11c8fc13..bdadf3e23c94 100644 --- a/drivers/net/hamradio/bpqether.c +++ b/drivers/net/hamradio/bpqether.c @@ -248,6 +248,7 @@ static netdev_tx_t bpq_xmit(struct sk_buff *skb, struct net_device *dev) { unsigned char *ptr; struct bpqdev *bpq; + struct net_device *orig_dev; int size; /* @@ -282,8 +283,9 @@ static netdev_tx_t bpq_xmit(struct sk_buff *skb, struct net_device *dev) bpq = netdev_priv(dev); + orig_dev = dev; if ((dev = bpq_get_ether_dev(dev)) == NULL) { - dev->stats.tx_dropped++; + orig_dev->stats.tx_dropped++; kfree_skb(skb); return NETDEV_TX_OK; } From 52ee264bca378835decb827d18b1d90b709ca4c9 Mon Sep 17 00:00:00 2001 From: Rakesh Ranjan Date: Sun, 27 Dec 2009 12:33:08 +0530 Subject: [PATCH 0320/1626] cxgb3i: Fix a login over vlan issue Fix a target login issue, when parent interface is vlan and we are using cxgb3i sepecific private ip address in '/etc/iscsi/ifaces/' iface file. Acked-by: Karen Xie Signed-off-by: Rakesh Ranjan Signed-off-by: David S. Miller --- drivers/scsi/cxgb3i/cxgb3i_offload.c | 34 +++++++++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c index c1d5be4adf9c..4b8a5133d69d 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_offload.c +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c @@ -1440,6 +1440,10 @@ void cxgb3i_c3cn_release(struct s3_conn *c3cn) static int is_cxgb3_dev(struct net_device *dev) { struct cxgb3i_sdev_data *cdata; + struct net_device *ndev = dev; + + if (dev->priv_flags && IFF_802_1Q_VLAN) + ndev = vlan_dev_real_dev(dev); write_lock(&cdata_rwlock); list_for_each_entry(cdata, &cdata_list, list) { @@ -1447,7 +1451,7 @@ static int is_cxgb3_dev(struct net_device *dev) int i; for (i = 0; i < ports->nports; i++) - if (dev == ports->lldevs[i]) { + if (ndev == ports->lldevs[i]) { write_unlock(&cdata_rwlock); return 1; } @@ -1566,6 +1570,26 @@ out_err: return -1; } +/* * + * cxgb3i_find_dev - find the interface associated with the given address + * @ipaddr: ip address + */ +static struct net_device * +cxgb3i_find_dev(struct net_device *dev, __be32 ipaddr) +{ + struct flowi fl; + int err; + struct rtable *rt; + + memset(&fl, 0, sizeof(fl)); + fl.nl_u.ip4_u.daddr = ipaddr; + + err = ip_route_output_key(dev ? dev_net(dev) : &init_net, &rt, &fl); + if (!err) + return (&rt->u.dst)->dev; + + return NULL; +} /** * cxgb3i_c3cn_connect - initiates an iscsi tcp connection to a given address @@ -1581,6 +1605,7 @@ int cxgb3i_c3cn_connect(struct net_device *dev, struct s3_conn *c3cn, struct cxgb3i_sdev_data *cdata; struct t3cdev *cdev; __be32 sipv4; + struct net_device *dstdev; int err; c3cn_conn_debug("c3cn 0x%p, dev 0x%p.\n", c3cn, dev); @@ -1591,6 +1616,13 @@ int cxgb3i_c3cn_connect(struct net_device *dev, struct s3_conn *c3cn, c3cn->daddr.sin_port = usin->sin_port; c3cn->daddr.sin_addr.s_addr = usin->sin_addr.s_addr; + dstdev = cxgb3i_find_dev(dev, usin->sin_addr.s_addr); + if (!dstdev || !is_cxgb3_dev(dstdev)) + return -ENETUNREACH; + + if (dstdev->priv_flags & IFF_802_1Q_VLAN) + dev = dstdev; + rt = find_route(dev, c3cn->saddr.sin_addr.s_addr, c3cn->daddr.sin_addr.s_addr, c3cn->saddr.sin_port, From 5d66fe92a19fb41373d13e75831169a6b5e5bef5 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 29 Dec 2009 09:15:42 +0000 Subject: [PATCH 0321/1626] drivers/net : Correct the size argument to kzalloc lp->rx_skb has type struct sk_buff **, not struct sk_buff *, so the elements of the array should have pointer type, not structure type. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @disable sizeof_type_expr@ type T; T **x; @@ x = <+...sizeof( - T + *x )...+> // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/ll_temac_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c index 336e7c7a9275..a8522bd73ae7 100644 --- a/drivers/net/ll_temac_main.c +++ b/drivers/net/ll_temac_main.c @@ -134,7 +134,7 @@ static int temac_dma_bd_init(struct net_device *ndev) struct sk_buff *skb; int i; - lp->rx_skb = kzalloc(sizeof(struct sk_buff)*RX_BD_NUM, GFP_KERNEL); + lp->rx_skb = kzalloc(sizeof(*lp->rx_skb) * RX_BD_NUM, GFP_KERNEL); /* allocate the tx and rx ring buffer descriptors. */ /* returns a virtual addres and a physical address. */ lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent, From e145b98484f5c7444151e90cc0853f14e6d396a4 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Sun, 27 Dec 2009 03:26:12 +0000 Subject: [PATCH 0322/1626] atarilance: timeout ignored in lance_open() With `while (--i > 0)' i reaches 0 after the loop, so upon timeout the error was not issued. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/atarilance.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c index c5721cb38265..cc9ed8643910 100644 --- a/drivers/net/atarilance.c +++ b/drivers/net/atarilance.c @@ -663,7 +663,7 @@ static int lance_open( struct net_device *dev ) while (--i > 0) if (DREG & CSR0_IDON) break; - if (i < 0 || (DREG & CSR0_ERR)) { + if (i <= 0 || (DREG & CSR0_ERR)) { DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n", dev->name, i, DREG )); DREG = CSR0_STOP; From d2a928e4bfc75170af641f073475fc974cf176c2 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Sun, 27 Dec 2009 04:10:59 +0000 Subject: [PATCH 0323/1626] niu: timeout ignored in tcam_wait_bit() With `while (--limit > 0)' i reaches 0 after the loop, so upon timeout the error was not returned. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/niu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index 8ce58c4c7dd3..2aed2b382c40 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -2844,7 +2844,7 @@ static int tcam_wait_bit(struct niu *np, u64 bit) break; udelay(1); } - if (limit < 0) + if (limit <= 0) return -ENODEV; return 0; From 890c8c18986eb975a76aa8359a712596bc70e61c Mon Sep 17 00:00:00 2001 From: roel kluin Date: Wed, 30 Dec 2009 01:43:45 +0000 Subject: [PATCH 0324/1626] net: Test off by one in sh_eth_reset() If no break occurred, cnt reaches 0 after the loop. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/sh_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index ca6285016dfd..7402b858cab7 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -110,7 +110,7 @@ static void sh_eth_reset(struct net_device *ndev) mdelay(1); cnt--; } - if (cnt < 0) + if (cnt == 0) printk(KERN_ERR "Device reset fail\n"); /* Table Init */ From 7ec4e7d3cfee9d7846dbd02ad442c40cb58512e8 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Wed, 30 Dec 2009 06:43:06 +0000 Subject: [PATCH 0325/1626] broadcom: Fix &&/|| confusion in bcm54xx_adjust_rxrefclk() This always evaluates to true. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/phy/broadcom.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index c13cf64095b6..33c4b12a63ba 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -331,8 +331,8 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) bool clk125en = true; /* Abort if we are using an untested phy. */ - if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 || - BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 || + if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 && + BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 && BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M) return; From 2585e7e5e1fcf64fd2b2cac0bc1f1b609eabe96a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 2 Jan 2010 04:08:46 +0000 Subject: [PATCH 0326/1626] rrunner: fix buffer overflow tx_skbuff is define as: struct sk_buff *tx_skbuff[TX_RING_ENTRIES]; EVT_RING_ENTRIES is 64 and TX_RING_ENTRIES is 32. This function is in a error path so that's why it wasn't noticed. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/rrunner.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c index 20a71749154a..1c257098d0a6 100644 --- a/drivers/net/rrunner.c +++ b/drivers/net/rrunner.c @@ -1293,7 +1293,7 @@ static void rr_dump(struct net_device *dev) printk("Error code 0x%x\n", readl(®s->Fail1)); - index = (((readl(®s->EvtPrd) >> 8) & 0xff ) - 1) % EVT_RING_ENTRIES; + index = (((readl(®s->EvtPrd) >> 8) & 0xff) - 1) % TX_RING_ENTRIES; cons = rrpriv->dirty_tx; printk("TX ring index %i, TX consumer %i\n", index, cons); From 2d2cf34681e65a2495946ebc90b407ba4088e8d0 Mon Sep 17 00:00:00 2001 From: Sucheta Chakraborty Date: Sat, 2 Jan 2010 03:25:18 +0000 Subject: [PATCH 0327/1626] netxen: fix ethtool register dump o Dump registers such as tx ring and rx ring counter, firmware state, niu regs, etc. which can be useful for debugging purpose. Signed-off-by: Sucheta Chakraborty Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_ethtool.c | 166 ++++++++---------------- 1 file changed, 57 insertions(+), 109 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c index ddd704ae0188..72ced0047edf 100644 --- a/drivers/net/netxen/netxen_nic_ethtool.c +++ b/drivers/net/netxen/netxen_nic_ethtool.c @@ -66,7 +66,7 @@ static const char netxen_nic_gstrings_test[][ETH_GSTRING_LEN] = { #define NETXEN_NIC_TEST_LEN ARRAY_SIZE(netxen_nic_gstrings_test) -#define NETXEN_NIC_REGS_COUNT 42 +#define NETXEN_NIC_REGS_COUNT 30 #define NETXEN_NIC_REGS_LEN (NETXEN_NIC_REGS_COUNT * sizeof(__le32)) #define NETXEN_MAX_EEPROM_LEN 1024 @@ -312,125 +312,73 @@ static int netxen_nic_get_regs_len(struct net_device *dev) return NETXEN_NIC_REGS_LEN; } -struct netxen_niu_regs { - __u32 reg[NETXEN_NIC_REGS_COUNT]; -}; - -static struct netxen_niu_regs niu_registers[] = { - { - /* GB Mode */ - { - NETXEN_NIU_GB_SERDES_RESET, - NETXEN_NIU_GB0_MII_MODE, - NETXEN_NIU_GB1_MII_MODE, - NETXEN_NIU_GB2_MII_MODE, - NETXEN_NIU_GB3_MII_MODE, - NETXEN_NIU_GB0_GMII_MODE, - NETXEN_NIU_GB1_GMII_MODE, - NETXEN_NIU_GB2_GMII_MODE, - NETXEN_NIU_GB3_GMII_MODE, - NETXEN_NIU_REMOTE_LOOPBACK, - NETXEN_NIU_GB0_HALF_DUPLEX, - NETXEN_NIU_GB1_HALF_DUPLEX, - NETXEN_NIU_RESET_SYS_FIFOS, - NETXEN_NIU_GB_CRC_DROP, - NETXEN_NIU_GB_DROP_WRONGADDR, - NETXEN_NIU_TEST_MUX_CTL, - - NETXEN_NIU_GB_MAC_CONFIG_0(0), - NETXEN_NIU_GB_MAC_CONFIG_1(0), - NETXEN_NIU_GB_HALF_DUPLEX_CTRL(0), - NETXEN_NIU_GB_MAX_FRAME_SIZE(0), - NETXEN_NIU_GB_TEST_REG(0), - NETXEN_NIU_GB_MII_MGMT_CONFIG(0), - NETXEN_NIU_GB_MII_MGMT_COMMAND(0), - NETXEN_NIU_GB_MII_MGMT_ADDR(0), - NETXEN_NIU_GB_MII_MGMT_CTRL(0), - NETXEN_NIU_GB_MII_MGMT_STATUS(0), - NETXEN_NIU_GB_MII_MGMT_INDICATE(0), - NETXEN_NIU_GB_INTERFACE_CTRL(0), - NETXEN_NIU_GB_INTERFACE_STATUS(0), - NETXEN_NIU_GB_STATION_ADDR_0(0), - NETXEN_NIU_GB_STATION_ADDR_1(0), - -1, - } - }, - { - /* XG Mode */ - { - NETXEN_NIU_XG_SINGLE_TERM, - NETXEN_NIU_XG_DRIVE_HI, - NETXEN_NIU_XG_DRIVE_LO, - NETXEN_NIU_XG_DTX, - NETXEN_NIU_XG_DEQ, - NETXEN_NIU_XG_WORD_ALIGN, - NETXEN_NIU_XG_RESET, - NETXEN_NIU_XG_POWER_DOWN, - NETXEN_NIU_XG_RESET_PLL, - NETXEN_NIU_XG_SERDES_LOOPBACK, - NETXEN_NIU_XG_DO_BYTE_ALIGN, - NETXEN_NIU_XG_TX_ENABLE, - NETXEN_NIU_XG_RX_ENABLE, - NETXEN_NIU_XG_STATUS, - NETXEN_NIU_XG_PAUSE_THRESHOLD, - NETXEN_NIU_XGE_CONFIG_0, - NETXEN_NIU_XGE_CONFIG_1, - NETXEN_NIU_XGE_IPG, - NETXEN_NIU_XGE_STATION_ADDR_0_HI, - NETXEN_NIU_XGE_STATION_ADDR_0_1, - NETXEN_NIU_XGE_STATION_ADDR_1_LO, - NETXEN_NIU_XGE_STATUS, - NETXEN_NIU_XGE_MAX_FRAME_SIZE, - NETXEN_NIU_XGE_PAUSE_FRAME_VALUE, - NETXEN_NIU_XGE_TX_BYTE_CNT, - NETXEN_NIU_XGE_TX_FRAME_CNT, - NETXEN_NIU_XGE_RX_BYTE_CNT, - NETXEN_NIU_XGE_RX_FRAME_CNT, - NETXEN_NIU_XGE_AGGR_ERROR_CNT, - NETXEN_NIU_XGE_MULTICAST_FRAME_CNT, - NETXEN_NIU_XGE_UNICAST_FRAME_CNT, - NETXEN_NIU_XGE_CRC_ERROR_CNT, - NETXEN_NIU_XGE_OVERSIZE_FRAME_ERR, - NETXEN_NIU_XGE_UNDERSIZE_FRAME_ERR, - NETXEN_NIU_XGE_LOCAL_ERROR_CNT, - NETXEN_NIU_XGE_REMOTE_ERROR_CNT, - NETXEN_NIU_XGE_CONTROL_CHAR_CNT, - NETXEN_NIU_XGE_PAUSE_FRAME_CNT, - -1, - } - } -}; - static void netxen_nic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p) { struct netxen_adapter *adapter = netdev_priv(dev); - __u32 mode, *regs_buff = p; - int i, window; + struct netxen_recv_context *recv_ctx = &adapter->recv_ctx; + struct nx_host_sds_ring *sds_ring; + u32 *regs_buff = p; + int ring, i = 0; + int port = adapter->physical_port; memset(p, 0, NETXEN_NIC_REGS_LEN); + regs->version = (1 << 24) | (adapter->ahw.revision_id << 16) | (adapter->pdev)->device; - /* which mode */ - regs_buff[0] = NXRD32(adapter, NETXEN_NIU_MODE); - mode = regs_buff[0]; - /* Common registers to all the modes */ - regs_buff[2] = NXRD32(adapter, NETXEN_NIU_STRAP_VALUE_SAVE_HIGHER); - /* GB/XGB Mode */ - mode = (mode / 2) - 1; - window = 0; - if (mode <= 1) { - for (i = 3; niu_registers[mode].reg[i - 3] != -1; i++) { - /* GB: port specific registers */ - if (mode == 0 && i >= 19) - window = adapter->physical_port * - NETXEN_NIC_PORT_WINDOW; + if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) + return; - regs_buff[i] = NXRD32(adapter, - niu_registers[mode].reg[i - 3] + window); - } + regs_buff[i++] = NXRD32(adapter, CRB_CMDPEG_STATE); + regs_buff[i++] = NXRD32(adapter, CRB_RCVPEG_STATE); + regs_buff[i++] = NXRD32(adapter, CRB_FW_CAPABILITIES_1); + regs_buff[i++] = NXRDIO(adapter, adapter->crb_int_state_reg); + regs_buff[i++] = NXRD32(adapter, NX_CRB_DEV_REF_COUNT); + regs_buff[i++] = NXRD32(adapter, NX_CRB_DEV_STATE); + regs_buff[i++] = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER); + regs_buff[i++] = NXRD32(adapter, NETXEN_PEG_HALT_STATUS1); + regs_buff[i++] = NXRD32(adapter, NETXEN_PEG_HALT_STATUS2); + regs_buff[i++] = NXRD32(adapter, NETXEN_CRB_PEG_NET_0+0x3c); + regs_buff[i++] = NXRD32(adapter, NETXEN_CRB_PEG_NET_1+0x3c); + regs_buff[i++] = NXRD32(adapter, NETXEN_CRB_PEG_NET_2+0x3c); + regs_buff[i++] = NXRD32(adapter, NETXEN_CRB_PEG_NET_3+0x3c); + + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) { + + regs_buff[i++] = NXRD32(adapter, NETXEN_CRB_PEG_NET_4+0x3c); + i += 2; + + regs_buff[i++] = NXRD32(adapter, CRB_XG_STATE_P3); + regs_buff[i++] = le32_to_cpu(*(adapter->tx_ring->hw_consumer)); + + } else { + i++; + + regs_buff[i++] = NXRD32(adapter, + NETXEN_NIU_XGE_CONFIG_0+(0x10000*port)); + regs_buff[i++] = NXRD32(adapter, + NETXEN_NIU_XGE_CONFIG_1+(0x10000*port)); + + regs_buff[i++] = NXRD32(adapter, CRB_XG_STATE); + regs_buff[i++] = NXRDIO(adapter, + adapter->tx_ring->crb_cmd_consumer); + } + + regs_buff[i++] = NXRDIO(adapter, adapter->tx_ring->crb_cmd_producer); + + regs_buff[i++] = NXRDIO(adapter, + recv_ctx->rds_rings[0].crb_rcv_producer); + regs_buff[i++] = NXRDIO(adapter, + recv_ctx->rds_rings[1].crb_rcv_producer); + + regs_buff[i++] = adapter->max_sds_rings; + + for (ring = 0; ring < adapter->max_sds_rings; ring++) { + sds_ring = &(recv_ctx->sds_rings[ring]); + regs_buff[i++] = NXRDIO(adapter, + sds_ring->crb_sts_consumer); } } From a4b751d87241c1b49ce43f819428223bfc22dc27 Mon Sep 17 00:00:00 2001 From: Sucheta Chakraborty Date: Sat, 2 Jan 2010 03:25:19 +0000 Subject: [PATCH 0328/1626] netxen: fix ethtool link test o Fix ethtool link test for NX3031 chip. o Remove unused code from phy interrupt callback Signed-off-by: Sucheta Chakraborty Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_ethtool.c | 23 ++++++++--------------- drivers/net/netxen/netxen_nic_main.c | 8 ++------ 2 files changed, 10 insertions(+), 21 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c index 72ced0047edf..542f408333ff 100644 --- a/drivers/net/netxen/netxen_nic_ethtool.c +++ b/drivers/net/netxen/netxen_nic_ethtool.c @@ -385,25 +385,18 @@ netxen_nic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p) static u32 netxen_nic_test_link(struct net_device *dev) { struct netxen_adapter *adapter = netdev_priv(dev); - __u32 status; - int val; + u32 val, port; - /* read which mode */ - if (adapter->ahw.port_type == NETXEN_NIC_GBE) { - if (adapter->phy_read && - adapter->phy_read(adapter, - NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, - &status) != 0) - return -EIO; - else { - val = netxen_get_phy_link(status); - return !val; - } - } else if (adapter->ahw.port_type == NETXEN_NIC_XGBE) { + port = adapter->physical_port; + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) { + val = NXRD32(adapter, CRB_XG_STATE_P3); + val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val); + return (val == XG_LINK_UP_P3) ? 0 : 1; + } else { val = NXRD32(adapter, CRB_XG_STATE); + val = (val >> port*8) & 0xff; return (val == XG_LINK_UP) ? 0 : 1; } - return -EIO; } static int diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 6cae26a5bd67..880fcd0663e6 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1898,12 +1898,8 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter) linkup = (val == XG_LINK_UP_P3); } else { val = NXRD32(adapter, CRB_XG_STATE); - if (adapter->ahw.port_type == NETXEN_NIC_GBE) - linkup = (val >> port) & 1; - else { - val = (val >> port*8) & 0xff; - linkup = (val == XG_LINK_UP); - } + val = (val >> port*8) & 0xff; + linkup = (val == XG_LINK_UP); } netxen_advert_link_change(adapter, linkup); From 7dbcd8c55fa9b39fe27383b697b8989697c1e1c5 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Jan 2010 15:38:50 +0900 Subject: [PATCH 0329/1626] sh: update defconfigs. Signed-off-by: Paul Mundt --- arch/sh/configs/ap325rxa_defconfig | 87 ++++++++-- arch/sh/configs/cayman_defconfig | 168 +++++++++++++++----- arch/sh/configs/dreamcast_defconfig | 78 ++++++--- arch/sh/configs/ecovec24-romimage_defconfig | 76 +++++++-- arch/sh/configs/ecovec24_defconfig | 89 +++++++++-- arch/sh/configs/edosk7705_defconfig | 49 +++++- arch/sh/configs/edosk7760_defconfig | 70 +++++--- arch/sh/configs/espt_defconfig | 77 +++++++-- arch/sh/configs/hp6xx_defconfig | 70 ++++++-- arch/sh/configs/kfr2r09-romimage_defconfig | 58 +++++-- arch/sh/configs/kfr2r09_defconfig | 71 +++++++-- arch/sh/configs/landisk_defconfig | 85 +++++++--- arch/sh/configs/lboxre2_defconfig | 89 ++++++++--- arch/sh/configs/magicpanelr2_defconfig | 69 ++++++-- arch/sh/configs/microdev_defconfig | 71 ++++++--- arch/sh/configs/migor_defconfig | 92 ++++++++--- arch/sh/configs/polaris_defconfig | 77 +++++++-- arch/sh/configs/r7780mp_defconfig | 99 +++++++++--- arch/sh/configs/r7785rp_defconfig | 98 +++++++++--- arch/sh/configs/rsk7201_defconfig | 59 ++++++- arch/sh/configs/rsk7203_defconfig | 71 +++++++-- arch/sh/configs/rts7751r2d1_defconfig | 95 ++++++++--- arch/sh/configs/rts7751r2dplus_defconfig | 95 ++++++++--- arch/sh/configs/sdk7780_defconfig | 88 +++++++--- arch/sh/configs/se7206_defconfig | 66 ++++++-- arch/sh/configs/se7343_defconfig | 72 ++++++--- arch/sh/configs/se7619_defconfig | 58 ++++++- arch/sh/configs/se7705_defconfig | 71 +++++++-- arch/sh/configs/se7712_defconfig | 61 +++++-- arch/sh/configs/se7721_defconfig | 62 ++++++-- arch/sh/configs/se7722_defconfig | 69 ++++++-- arch/sh/configs/se7724_defconfig | 100 ++++++++++-- arch/sh/configs/se7750_defconfig | 70 ++++++-- arch/sh/configs/se7751_defconfig | 70 ++++++-- arch/sh/configs/se7780_defconfig | 79 +++++++-- arch/sh/configs/sh03_defconfig | 80 +++++++--- arch/sh/configs/sh7710voipgw_defconfig | 66 ++++++-- arch/sh/configs/sh7724_generic_defconfig | 80 +++++++--- arch/sh/configs/sh7763rdp_defconfig | 74 ++++++--- arch/sh/configs/sh7770_generic_defconfig | 79 ++++++--- arch/sh/configs/sh7785lcr_32bit_defconfig | 83 +++++++--- arch/sh/configs/sh7785lcr_defconfig | 83 +++++++--- arch/sh/configs/shmin_defconfig | 64 ++++++-- arch/sh/configs/shx3_defconfig | 93 +++++++++-- arch/sh/configs/snapgear_defconfig | 79 ++++++--- arch/sh/configs/systemh_defconfig | 64 ++++++-- arch/sh/configs/titan_defconfig | 87 +++++++--- arch/sh/configs/ul2_defconfig | 86 +++++++--- arch/sh/configs/urquell_defconfig | 99 ++++++++---- 49 files changed, 3005 insertions(+), 871 deletions(-) diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig index 2f78d01cc6c0..8931a60e37a4 100644 --- a/arch/sh/configs/ap325rxa_defconfig +++ b/arch/sh/configs/ap325rxa_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Fri Sep 25 11:22:50 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:10:59 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_CMT=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -30,6 +31,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -62,6 +64,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -99,6 +102,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -116,6 +120,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -142,14 +147,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # @@ -205,6 +237,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 CONFIG_29BIT=y +# CONFIG_PMB_ENABLE is not set # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -229,8 +262,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -262,7 +293,6 @@ CONFIG_SH_AP325RXA=y # CONFIG_SH_TIMER_TMU=y # CONFIG_SH_TIMER_CMT is not set -CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_CLK_CPG=y CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set @@ -418,9 +448,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -550,6 +577,10 @@ CONFIG_MTD_UBI_BEB_RESERVE=1 CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 @@ -559,9 +590,12 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -572,6 +606,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -664,11 +699,11 @@ CONFIG_SMSC911X=y # CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -688,6 +723,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -782,7 +818,6 @@ CONFIG_I2C_SH_MOBILE=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -796,7 +831,10 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=y CONFIG_SPI_GPIO=y +# CONFIG_SPI_SH_MSIOF is not set # CONFIG_SPI_SH_SCI is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -854,11 +892,13 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set @@ -866,6 +906,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set CONFIG_MEDIA_SUPPORT=y @@ -882,6 +924,8 @@ CONFIG_VIDEO_MEDIA=y # # Multimedia drivers # +CONFIG_IR_CORE=y +CONFIG_VIDEO_IR=y # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=y # CONFIG_MEDIA_TUNER_CUSTOMISE is not set @@ -901,6 +945,7 @@ CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_IR_I2C=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set @@ -908,10 +953,13 @@ CONFIG_SOC_CAMERA=y # CONFIG_SOC_CAMERA_MT9M001 is not set # CONFIG_SOC_CAMERA_MT9M111 is not set # CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9T112 is not set # CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_RJ54N1 is not set # CONFIG_SOC_CAMERA_TW9910 is not set CONFIG_SOC_CAMERA_PLATFORM=y CONFIG_SOC_CAMERA_OV772X=y +# CONFIG_SOC_CAMERA_OV9640 is not set CONFIG_VIDEO_SH_MOBILE_CEU=y # CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set @@ -996,6 +1044,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_AT91 is not set # CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_SPI=y +# CONFIG_MMC_TMIO is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set @@ -1027,6 +1076,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1055,7 +1105,9 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1248,7 +1300,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1265,7 +1317,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -1274,7 +1325,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig index 6b863cb1e248..92589a950d07 100644 --- a/arch/sh/configs/cayman_defconfig +++ b/arch/sh/configs/cayman_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30 -# Thu Jun 18 12:21:54 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:14:50 2010 # CONFIG_SUPERH=y # CONFIG_SUPERH32 is not set @@ -14,11 +14,13 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_IRQ_PER_CPU=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set # CONFIG_ARCH_HIBERNATION_POSSIBLE is not set +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -28,7 +30,10 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -39,6 +44,12 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SWAP=y # CONFIG_SYSVIPC is not set CONFIG_POSIX_MQUEUE=y @@ -50,11 +61,13 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -85,24 +98,32 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -115,7 +136,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -123,14 +144,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -178,8 +226,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # @@ -255,13 +302,13 @@ CONFIG_PREEMPT=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00400000 CONFIG_ENTRY_OFFSET=0x00001000 -# CONFIG_CMDLINE_BOOL is not set +# CONFIG_CMDLINE_OVERWRITE is not set +# CONFIG_CMDLINE_EXTEND is not set # # Bus options # CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -330,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -359,14 +407,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -379,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -395,6 +441,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -405,6 +455,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -412,6 +463,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -462,8 +514,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -495,7 +550,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -507,7 +565,11 @@ CONFIG_SCSI_LOWLEVEL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -546,6 +608,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -565,6 +628,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -590,12 +654,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -609,6 +671,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -618,6 +681,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -682,6 +746,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -710,6 +775,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SH_MOBILE is not set # CONFIG_I2C_SIMTEC is not set @@ -720,11 +786,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -734,20 +795,26 @@ CONFIG_I2C_HELPER_AUTO=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -771,6 +838,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -797,6 +865,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -808,9 +877,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -837,17 +905,20 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -939,7 +1010,6 @@ CONFIG_LOGO_SUPERH_CLUT224=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1002,8 +1072,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1067,7 +1139,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1120,6 +1191,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1155,21 +1227,25 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_FTRACE_SYSCALLS is not set # CONFIG_BOOT_TRACER is not set CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set @@ -1180,11 +1256,9 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set -# CONFIG_KMEMCHECK is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_DEBUG_BOOTMEM is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set +# CONFIG_DWARF_UNWINDER is not set # CONFIG_SH_NO_BSS_INIT is not set CONFIG_SH64_SR_WATCH=y @@ -1194,13 +1268,16 @@ CONFIG_SH64_SR_WATCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1232,11 +1309,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1299,5 +1378,6 @@ CONFIG_CRC32=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y CONFIG_NLATTR=y CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig index aedbd4f13046..55f652be954b 100644 --- a/arch/sh/configs/dreamcast_defconfig +++ b/arch/sh/configs/dreamcast_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 17:56:07 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:17:35 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -21,6 +21,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CMOS_UPDATE=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -31,6 +32,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -63,6 +65,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -97,6 +100,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -117,6 +121,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -143,14 +148,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -232,8 +264,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -294,9 +324,9 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y # # DMA support # -CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y CONFIG_SH_DMA_IRQ_MULTI=y +CONFIG_SH_DMA_API=y CONFIG_NR_ONCHIP_DMA_CHANNELS=4 CONFIG_NR_DMA_CHANNELS_BOOL=y CONFIG_NR_DMA_CHANNELS=9 @@ -338,7 +368,6 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 -# CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_OVERWRITE=y # CONFIG_CMDLINE_EXTEND is not set CONFIG_CMDLINE="console=ttySC1,115200 panic=3" @@ -348,7 +377,6 @@ CONFIG_CMDLINE="console=ttySC1,115200 panic=3" # CONFIG_MAPLE=y CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -443,9 +471,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -478,6 +503,10 @@ CONFIG_GDROM=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set @@ -579,6 +608,7 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -586,8 +616,9 @@ CONFIG_8139TOO=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -600,6 +631,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -609,6 +641,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -655,6 +688,7 @@ CONFIG_SERIO=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -734,6 +768,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -883,6 +918,7 @@ CONFIG_RTC_LIB=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -981,10 +1017,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y @@ -997,7 +1034,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -1006,7 +1042,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/ecovec24-romimage_defconfig b/arch/sh/configs/ecovec24-romimage_defconfig index 46874704e4e7..662c1ad20494 100644 --- a/arch/sh/configs/ecovec24-romimage_defconfig +++ b/arch/sh/configs/ecovec24-romimage_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 17:56:41 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:18:17 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_CMT=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -30,6 +31,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -61,6 +63,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -103,6 +106,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -120,6 +124,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -142,14 +147,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -205,6 +237,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x10000000 CONFIG_29BIT=y +# CONFIG_PMB_ENABLE is not set # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -229,8 +262,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -264,7 +295,6 @@ CONFIG_SH_ECOVEC=y # # CONFIG_SH_TIMER_TMU is not set CONFIG_SH_TIMER_CMT=y -CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_CLK_CPG=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set @@ -406,7 +436,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -432,6 +468,10 @@ CONFIG_EXTRA_FIRMWARE="" CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set @@ -526,11 +566,12 @@ CONFIG_SH_ETH=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -559,6 +600,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -652,7 +694,6 @@ CONFIG_I2C_SH_MOBILE=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -707,16 +748,19 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -867,6 +911,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -979,7 +1024,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -997,7 +1042,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -1006,7 +1050,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig index cad918437ca7..18e3356406f3 100644 --- a/arch/sh/configs/ecovec24_defconfig +++ b/arch/sh/configs/ecovec24_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 17:45:39 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:20:36 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_CMT=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -30,6 +31,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -62,6 +64,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -99,6 +102,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -116,6 +120,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -143,14 +148,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # @@ -206,6 +238,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x10000000 CONFIG_29BIT=y +# CONFIG_PMB_ENABLE is not set # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -230,8 +263,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -265,7 +296,6 @@ CONFIG_SH_ECOVEC=y # CONFIG_SH_TIMER_TMU=y # CONFIG_SH_TIMER_CMT is not set -CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_CLK_CPG=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set @@ -420,9 +450,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -552,6 +579,10 @@ CONFIG_MTD_UBI_BEB_RESERVE=1 CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -562,9 +593,12 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -575,6 +609,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -669,11 +704,12 @@ CONFIG_SH_ETH=y # CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -702,6 +738,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -810,7 +847,6 @@ CONFIG_I2C_SH_MOBILE=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -824,7 +860,10 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=y # CONFIG_SPI_GPIO is not set +# CONFIG_SPI_SH_MSIOF is not set # CONFIG_SPI_SH_SCI is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -882,11 +921,13 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set @@ -894,6 +935,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set CONFIG_MEDIA_SUPPORT=y @@ -910,6 +953,8 @@ CONFIG_VIDEO_MEDIA=y # # Multimedia drivers # +CONFIG_IR_CORE=y +CONFIG_VIDEO_IR=y # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=y # CONFIG_MEDIA_TUNER_CUSTOMISE is not set @@ -930,6 +975,7 @@ CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_IR_I2C=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_CPIA2 is not set @@ -939,10 +985,13 @@ CONFIG_SOC_CAMERA=y # CONFIG_SOC_CAMERA_MT9M001 is not set # CONFIG_SOC_CAMERA_MT9M111 is not set # CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9T112 is not set # CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_RJ54N1 is not set # CONFIG_SOC_CAMERA_TW9910 is not set # CONFIG_SOC_CAMERA_PLATFORM is not set # CONFIG_SOC_CAMERA_OV772X is not set +# CONFIG_SOC_CAMERA_OV9640 is not set CONFIG_VIDEO_SH_MOBILE_CEU=y # CONFIG_V4L_USB_DRIVERS is not set CONFIG_RADIO_ADAPTERS=y @@ -952,6 +1001,7 @@ CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_SI470X is not set # CONFIG_USB_MR800 is not set # CONFIG_RADIO_TEA5764 is not set +# CONFIG_RADIO_TEF6862 is not set # CONFIG_DAB is not set # @@ -1177,6 +1227,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_AT91 is not set # CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_SPI=y +# CONFIG_MMC_TMIO is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set @@ -1208,6 +1259,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1236,7 +1288,9 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1430,7 +1484,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1448,7 +1502,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -1457,7 +1510,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig index 86c9bc050629..72f8718dd738 100644 --- a/arch/sh/configs/edosk7705_defconfig +++ b/arch/sh/configs/edosk7705_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 17:57:13 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:24:26 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -28,6 +28,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -53,6 +54,7 @@ CONFIG_KERNEL_GZIP=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -66,7 +68,6 @@ CONFIG_LOG_BUF_SHIFT=17 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y # CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set # CONFIG_PRINTK is not set @@ -81,6 +82,7 @@ CONFIG_EMBEDDED=y CONFIG_SHMEM=y # CONFIG_AIO is not set CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -98,6 +100,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -109,6 +112,35 @@ CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set # CONFIG_BLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -186,8 +218,6 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -359,6 +389,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -416,7 +447,6 @@ CONFIG_INOTIFY_USER=y # CONFIG_PROC_FS is not set # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_MISC_FILESYSTEMS=y # CONFIG_NLS is not set @@ -448,7 +478,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -456,7 +485,11 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig index 4c0f82b7def2..0932e6d656eb 100644 --- a/arch/sh/configs/edosk7760_defconfig +++ b/arch/sh/configs/edosk7760_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 17:57:30 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:24:44 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -29,6 +30,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -62,6 +64,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -102,6 +105,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -121,6 +125,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -147,14 +152,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -230,8 +262,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -278,9 +308,9 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # DMA support # -CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y CONFIG_SH_DMA_IRQ_MULTI=y +CONFIG_SH_DMA_API=y CONFIG_NR_ONCHIP_DMA_CHANNELS=8 # CONFIG_NR_DMA_CHANNELS_BOOL is not set # CONFIG_SH_DMABRG is not set @@ -320,7 +350,6 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x02000000 CONFIG_ENTRY_OFFSET=0x00001000 -# CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_OVERWRITE=y # CONFIG_CMDLINE_EXTEND is not set CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4" @@ -415,9 +444,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -534,6 +560,10 @@ CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -581,11 +611,11 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -605,6 +635,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -698,7 +729,6 @@ CONFIG_I2C_SH7760=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y @@ -727,15 +757,18 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1072,9 +1105,6 @@ CONFIG_BRANCH_PROFILE_NONE=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y -CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000 -CONFIG_EARLY_PRINTK=y # CONFIG_STACK_DEBUG is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set @@ -1088,7 +1118,11 @@ CONFIG_DUMP_CODE=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig index 9b785517abcf..f899e5613f86 100644 --- a/arch/sh/configs/espt_defconfig +++ b/arch/sh/configs/espt_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 17:58:18 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:26:55 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -29,6 +30,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -59,6 +61,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -103,6 +106,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -124,6 +128,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -150,14 +155,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -211,6 +243,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y +# CONFIG_PMB_ENABLE is not set CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -237,8 +270,6 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -419,7 +450,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -498,7 +535,6 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_PHYSMAP_COMPAT is not set -# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_PLATRAM is not set # @@ -531,6 +567,10 @@ CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set @@ -629,11 +669,12 @@ CONFIG_SH_ETH=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -662,6 +703,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -745,6 +787,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -1102,10 +1145,11 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_STACKTRACE=y -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -1125,7 +1169,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -1134,7 +1177,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig index f59be446f829..06644908631e 100644 --- a/arch/sh/configs/hp6xx_defconfig +++ b/arch/sh/configs/hp6xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 17:59:45 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:30:31 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -30,6 +30,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -57,6 +58,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -92,6 +94,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -109,6 +112,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -130,14 +134,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # @@ -213,8 +244,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -261,8 +290,8 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # DMA support # -CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y +CONFIG_SH_DMA_API=y CONFIG_NR_ONCHIP_DMA_CHANNELS=6 # CONFIG_NR_DMA_CHANNELS_BOOL is not set @@ -313,7 +342,6 @@ CONFIG_ENTRY_OFFSET=0x00001000 # # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_IOCTL=y @@ -363,6 +391,10 @@ CONFIG_EXTRA_FIRMWARE="" CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_BLK_DEV_HD is not set @@ -432,6 +464,7 @@ CONFIG_PATA_PLATFORM=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set CONFIG_INPUT_POLLDEV=y +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -460,6 +493,7 @@ CONFIG_KEYBOARD_HP6XX=y # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -483,6 +517,7 @@ CONFIG_SERIO=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -550,6 +585,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -659,7 +695,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -684,6 +722,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -731,7 +770,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -813,10 +851,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y @@ -829,7 +868,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -838,7 +876,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/kfr2r09-romimage_defconfig b/arch/sh/configs/kfr2r09-romimage_defconfig index 02590e127f74..3d834e59e8f9 100644 --- a/arch/sh/configs/kfr2r09-romimage_defconfig +++ b/arch/sh/configs/kfr2r09-romimage_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:01:48 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:31:09 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_CMT=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -30,6 +31,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -60,6 +62,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -102,6 +105,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -119,6 +123,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -133,6 +138,35 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # CONFIG_BLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -188,6 +222,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 CONFIG_29BIT=y +# CONFIG_PMB_ENABLE is not set # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -212,8 +247,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -247,7 +280,6 @@ CONFIG_SH_KFR2R09=y # # CONFIG_SH_TIMER_TMU is not set CONFIG_SH_TIMER_CMT=y -CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_CLK_CPG=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set @@ -429,6 +461,7 @@ CONFIG_HAVE_IDE=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -520,7 +553,6 @@ CONFIG_I2C_SH_MOBILE=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -575,16 +607,19 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -650,10 +685,12 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ETH is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_MASS_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set CONFIG_USB_CDC_COMPOSITE=y +# CONFIG_USB_G_MULTI is not set # # OTG and related infrastructure @@ -725,7 +762,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -743,7 +780,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -752,7 +788,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set diff --git a/arch/sh/configs/kfr2r09_defconfig b/arch/sh/configs/kfr2r09_defconfig index 8ae65d294b11..f22be494ed99 100644 --- a/arch/sh/configs/kfr2r09_defconfig +++ b/arch/sh/configs/kfr2r09_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Fri Sep 25 11:54:22 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:32:55 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_CMT=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -30,6 +31,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -62,6 +64,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -104,6 +107,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -121,6 +125,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -148,14 +153,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -211,6 +243,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 CONFIG_29BIT=y +# CONFIG_PMB_ENABLE is not set # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -235,8 +268,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -270,7 +301,6 @@ CONFIG_SH_KFR2R09=y # # CONFIG_SH_TIMER_TMU is not set CONFIG_SH_TIMER_CMT=y -CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_CLK_CPG=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y @@ -534,6 +564,10 @@ CONFIG_MTD_UBI_BEB_RESERVE=1 CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set @@ -562,6 +596,7 @@ CONFIG_HAVE_IDE=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -668,7 +703,6 @@ CONFIG_I2C_SH_MOBILE=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -723,16 +757,19 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -847,10 +884,12 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ETH is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_MASS_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set -CONFIG_USB_CDC_COMPOSITE=y +CONFIG_USB_CDC_COMPOSITE=m +# CONFIG_USB_G_MULTI is not set # # OTG and related infrastructure @@ -875,6 +914,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_AT91 is not set # CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_TMIO is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set @@ -906,6 +946,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -926,7 +967,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -953,6 +996,7 @@ CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -1027,7 +1071,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1045,7 +1089,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -1054,7 +1097,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig index c2a9a3996388..2a42d4977fe4 100644 --- a/arch/sh/configs/landisk_defconfig +++ b/arch/sh/configs/landisk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:05:49 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:35:31 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -30,6 +31,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -60,6 +62,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -94,6 +97,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -113,6 +117,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -139,14 +144,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -222,8 +254,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -311,7 +341,6 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_OVERWRITE is not set # CONFIG_CMDLINE_EXTEND is not set @@ -319,14 +348,12 @@ CONFIG_ENTRY_OFFSET=0x00001000 # Bus options # CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_IOCTL=y @@ -461,9 +488,6 @@ CONFIG_ATALK=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -498,6 +522,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -618,8 +646,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -652,7 +683,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set @@ -733,6 +766,7 @@ CONFIG_8139CP=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -781,8 +815,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -806,6 +845,7 @@ CONFIG_USB_RTL8150=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -815,6 +855,7 @@ CONFIG_USB_RTL8150=m CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -933,6 +974,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -1371,10 +1413,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y @@ -1387,8 +1430,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y -# CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_EARLY_PRINTK is not set # CONFIG_DWARF_UNWINDER is not set # @@ -1397,7 +1438,11 @@ CONFIG_SH_STANDARD_BIOS=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig index ec0c0b432c74..f2f1f8c73b2f 100644 --- a/arch/sh/configs/lboxre2_defconfig +++ b/arch/sh/configs/lboxre2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:09:59 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:37:01 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -30,6 +31,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -60,6 +62,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -94,6 +97,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -113,6 +117,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -139,14 +144,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -222,8 +254,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -311,7 +341,6 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 -# CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_OVERWRITE=y # CONFIG_CMDLINE_EXTEND is not set CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1" @@ -320,14 +349,12 @@ CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1" # Bus options # CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set CONFIG_PCCARD=y -CONFIG_PCMCIA_DEBUG=y CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_IOCTL=y @@ -459,9 +486,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -496,6 +520,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -558,8 +586,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -593,7 +624,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set @@ -648,15 +681,16 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y @@ -732,6 +766,7 @@ CONFIG_8139TOO_TUNE_TWISTER=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -780,8 +815,12 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -804,6 +843,7 @@ CONFIG_PCMCIA_PCNET=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -813,6 +853,7 @@ CONFIG_PCMCIA_PCNET=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -931,6 +972,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -1020,7 +1062,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1195,10 +1239,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y @@ -1211,8 +1256,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y -# CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_EARLY_PRINTK is not set # CONFIG_DWARF_UNWINDER is not set # @@ -1221,7 +1264,11 @@ CONFIG_SH_STANDARD_BIOS=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig index 79091e3e32c4..a7a16ce357ad 100644 --- a/arch/sh/configs/magicpanelr2_defconfig +++ b/arch/sh/configs/magicpanelr2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:10:49 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:37:42 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -30,6 +30,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -63,6 +64,7 @@ CONFIG_AUDIT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -102,6 +104,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -120,6 +123,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -146,14 +150,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -229,8 +260,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -283,8 +312,8 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # DMA support # -CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y +CONFIG_SH_DMA_API=y CONFIG_NR_ONCHIP_DMA_CHANNELS=6 # CONFIG_NR_DMA_CHANNELS_BOOL is not set @@ -416,9 +445,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -534,6 +560,10 @@ CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -607,11 +637,11 @@ CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -631,6 +661,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -675,6 +706,7 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -766,6 +798,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -824,7 +857,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -898,7 +933,6 @@ CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -1072,9 +1106,6 @@ CONFIG_BRANCH_PROFILE_NONE=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y -CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000 -CONFIG_EARLY_PRINTK=y # CONFIG_STACK_DEBUG is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set @@ -1088,7 +1119,11 @@ CONFIG_DUMP_CODE=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig index 6bb5976aff2a..7d43fabdc073 100644 --- a/arch/sh/configs/microdev_defconfig +++ b/arch/sh/configs/microdev_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:14:35 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:40:41 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -29,6 +30,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -60,6 +62,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -98,6 +101,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -115,6 +119,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -136,14 +141,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -225,8 +257,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -272,8 +302,8 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # DMA support # -CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y +CONFIG_SH_DMA_API=y CONFIG_NR_ONCHIP_DMA_CHANNELS=6 # CONFIG_NR_DMA_CHANNELS_BOOL is not set @@ -312,7 +342,6 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 -# CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_OVERWRITE=y # CONFIG_CMDLINE_EXTEND is not set CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1" @@ -412,9 +441,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -443,6 +469,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -517,11 +547,11 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -616,6 +646,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -835,10 +866,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y @@ -851,7 +883,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -860,7 +891,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index 65018283c3a8..d2b183117771 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:17:41 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:41:41 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_CMT=y CONFIG_SYS_SUPPORTS_TMU=y @@ -31,6 +32,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -61,6 +63,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -100,6 +103,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -121,6 +125,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -147,14 +152,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # @@ -240,8 +272,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -277,7 +307,6 @@ CONFIG_SH_MIGOR_QVGA=y # CONFIG_SH_TIMER_TMU=y # CONFIG_SH_TIMER_CMT is not set -CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_CLK_CPG=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set @@ -433,10 +462,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # @@ -554,6 +579,10 @@ CONFIG_MTD_NAND_PLATFORM=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -563,9 +592,11 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -646,11 +677,11 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -670,6 +701,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -776,7 +808,6 @@ CONFIG_I2C_SH_MOBILE=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -831,16 +862,19 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set CONFIG_MEDIA_SUPPORT=y @@ -857,6 +891,8 @@ CONFIG_VIDEO_MEDIA=y # # Multimedia drivers # +CONFIG_IR_CORE=y +CONFIG_VIDEO_IR=y # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=y # CONFIG_MEDIA_TUNER_CUSTOMISE is not set @@ -876,6 +912,7 @@ CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_IR_I2C=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set @@ -883,10 +920,13 @@ CONFIG_SOC_CAMERA=y # CONFIG_SOC_CAMERA_MT9M001 is not set # CONFIG_SOC_CAMERA_MT9M111 is not set # CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9T112 is not set # CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_RJ54N1 is not set CONFIG_SOC_CAMERA_TW9910=y # CONFIG_SOC_CAMERA_PLATFORM is not set CONFIG_SOC_CAMERA_OV772X=y +# CONFIG_SOC_CAMERA_OV9640 is not set CONFIG_VIDEO_SH_MOBILE_CEU=y # CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set @@ -1009,10 +1049,12 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ETH is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set -CONFIG_USB_G_SERIAL=y +# CONFIG_USB_MASS_STORAGE is not set +CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_MULTI is not set # # OTG and related infrastructure @@ -1051,6 +1093,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1071,7 +1114,9 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1098,6 +1143,7 @@ CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -1206,10 +1252,11 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_STACKTRACE=y -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -1229,9 +1276,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y -CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000 -CONFIG_EARLY_PRINTK=y # CONFIG_DWARF_UNWINDER is not set # @@ -1240,7 +1284,11 @@ CONFIG_EARLY_PRINTK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig index 7fc1952419aa..d50c0314281e 100644 --- a/arch/sh/configs/polaris_defconfig +++ b/arch/sh/configs/polaris_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:20:53 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 11:45:25 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -29,6 +29,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -63,6 +64,7 @@ CONFIG_AUDIT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -102,6 +104,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -120,6 +123,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -146,14 +150,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -225,12 +256,10 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -279,8 +308,8 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # DMA support # -CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y +CONFIG_SH_DMA_API=y CONFIG_NR_ONCHIP_DMA_CHANNELS=6 # CONFIG_NR_DMA_CHANNELS_BOOL is not set @@ -409,7 +438,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -525,6 +560,10 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set @@ -595,11 +634,11 @@ CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -619,6 +658,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -657,7 +697,6 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_N_HDLC is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set -# CONFIG_RIO is not set # CONFIG_STALDRV is not set # @@ -705,6 +744,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -764,7 +804,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -787,6 +829,7 @@ CONFIG_RTC_DRV_SH=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -833,7 +876,6 @@ CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -977,9 +1019,6 @@ CONFIG_BRANCH_PROFILE_NONE=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y -CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4000150 -CONFIG_EARLY_PRINTK=y # CONFIG_STACK_DEBUG is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set @@ -993,7 +1032,11 @@ CONFIG_DUMP_CODE=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig index 903b021e8d93..efda63d4070a 100644 --- a/arch/sh/configs/r7780mp_defconfig +++ b/arch/sh/configs/r7780mp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:24:31 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 13:16:13 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -31,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_IO_TRAPPED=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -63,6 +65,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -103,6 +106,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -110,6 +114,7 @@ CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_EVENTS=y CONFIG_EVENT_PROFILE=y # CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_COMPAT_BRK=y @@ -125,6 +130,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -135,6 +141,7 @@ CONFIG_HAVE_DMA_API_DEBUG=y # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -151,14 +158,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -245,8 +279,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -342,7 +374,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" # Bus options # CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -449,10 +480,6 @@ CONFIG_LLC=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # @@ -535,7 +562,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PCI is not set -# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -573,6 +599,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -583,6 +613,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -590,6 +621,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -640,8 +672,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -675,7 +710,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y @@ -728,15 +765,16 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y @@ -813,6 +851,7 @@ CONFIG_8139TOO_8129=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y # CONFIG_SC92031 is not set @@ -862,8 +901,9 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -877,6 +917,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -886,6 +927,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -928,6 +970,7 @@ CONFIG_SERIO=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -1007,11 +1050,6 @@ CONFIG_I2C_HIGHLANDER=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -1021,7 +1059,6 @@ CONFIG_I2C_HIGHLANDER=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1065,6 +1102,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1103,6 +1141,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set CONFIG_THERMAL=y # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set @@ -1118,15 +1157,18 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1211,6 +1253,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1231,7 +1274,9 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1436,6 +1481,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -1462,6 +1509,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y @@ -1498,9 +1546,6 @@ CONFIG_BRANCH_PROFILE_NONE=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y -CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000 -# CONFIG_EARLY_PRINTK is not set # CONFIG_STACK_DEBUG is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set @@ -1514,7 +1559,11 @@ CONFIG_DUMP_CODE=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig index 27ff46c13a87..f4b00451dcee 100644 --- a/arch/sh/configs/r7785rp_defconfig +++ b/arch/sh/configs/r7785rp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:29:23 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 13:19:35 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_SYS_SUPPORTS_TMU=y @@ -32,6 +33,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_IO_TRAPPED=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -67,6 +69,7 @@ CONFIG_AUDIT_TREE=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set CONFIG_RCU_TRACE=y CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -103,6 +106,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -110,6 +114,7 @@ CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_EVENTS=y CONFIG_EVENT_PROFILE=y # CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_COMPAT_BRK=y @@ -126,6 +131,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -153,14 +159,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -248,13 +281,11 @@ CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_MEMORY_HOTPLUG is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -289,7 +320,6 @@ CONFIG_SH_R7785RP=y # Timer and clock configuration # CONFIG_SH_TIMER_TMU=y -CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_CLK_CPG=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y @@ -363,7 +393,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" # Bus options # CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_LEGACY is not set @@ -471,10 +500,6 @@ CONFIG_LLC=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # @@ -510,6 +535,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -520,6 +549,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -527,6 +557,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -577,8 +608,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -612,7 +646,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y @@ -665,15 +701,16 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y @@ -730,6 +767,7 @@ CONFIG_AX88796_93CX6=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -776,8 +814,9 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -791,6 +830,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -800,6 +840,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -844,6 +885,7 @@ CONFIG_SERIO=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -924,11 +966,6 @@ CONFIG_I2C_HIGHLANDER=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -938,7 +975,6 @@ CONFIG_I2C_HIGHLANDER=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -969,6 +1005,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1011,6 +1048,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1050,6 +1088,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1064,16 +1103,19 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1211,6 +1253,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1231,7 +1274,9 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1463,6 +1508,7 @@ CONFIG_FRAME_POINTER=y # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y @@ -1499,8 +1545,6 @@ CONFIG_BRANCH_PROFILE_NONE=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_SH_STANDARD_BIOS=y -# CONFIG_EARLY_SCIF_CONSOLE is not set -CONFIG_EARLY_PRINTK=y # CONFIG_STACK_DEBUG is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_4KSTACKS=y @@ -1514,7 +1558,11 @@ CONFIG_DUMP_CODE=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig index c40db12e9ad7..2fc635a5a8c5 100644 --- a/arch/sh/configs/rsk7201_defconfig +++ b/arch/sh/configs/rsk7201_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:34:29 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 13:23:12 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -29,6 +29,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -56,6 +57,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -97,6 +99,7 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_AIO is not set CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -109,6 +112,7 @@ CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y +# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=y @@ -117,6 +121,7 @@ CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -142,14 +147,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -224,7 +256,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # @@ -433,6 +464,10 @@ CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_BLK_DEV_HD is not set @@ -464,6 +499,7 @@ CONFIG_HAVE_IDE=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -540,6 +576,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -594,7 +631,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -618,6 +657,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -717,7 +757,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_STACKTRACE=y -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -741,7 +781,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -750,7 +789,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set CONFIG_BINARY_PRINTF=y diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig index 5cabdb3a84fb..0169e60e0947 100644 --- a/arch/sh/configs/rsk7203_defconfig +++ b/arch/sh/configs/rsk7203_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:35:04 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 13:23:54 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -30,6 +30,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -61,6 +62,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -104,6 +106,7 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -111,11 +114,13 @@ CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_EVENTS=y CONFIG_EVENT_PROFILE=y # CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y +# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=y @@ -124,6 +129,7 @@ CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -149,14 +155,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -231,7 +264,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # @@ -424,9 +456,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -539,6 +568,10 @@ CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set @@ -610,11 +643,12 @@ CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -643,6 +677,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -743,6 +778,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set CONFIG_REGULATOR=y @@ -910,6 +946,8 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_REGULATOR is not set +# CONFIG_LEDS_LT3593 is not set # # LED Triggers @@ -955,7 +993,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -978,6 +1018,7 @@ CONFIG_RTC_DRV_SH=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -1137,6 +1178,7 @@ CONFIG_DEBUG_OBJECTS=y # CONFIG_DEBUG_OBJECTS_SELFTEST is not set # CONFIG_DEBUG_OBJECTS_FREE is not set # CONFIG_DEBUG_OBJECTS_TIMERS is not set +# CONFIG_DEBUG_OBJECTS_WORK is not set CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1203,9 +1245,6 @@ CONFIG_BRANCH_PROFILE_NONE=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y -CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000 -CONFIG_EARLY_PRINTK=y # CONFIG_STACK_DEBUG is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_DUMP_CODE=y @@ -1218,7 +1257,11 @@ CONFIG_DUMP_CODE=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set CONFIG_BINARY_PRINTF=y diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig index 6f1126b3e487..fba1f62d56e7 100644 --- a/arch/sh/configs/rts7751r2d1_defconfig +++ b/arch/sh/configs/rts7751r2d1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:36:25 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 13:25:36 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -31,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_IO_TRAPPED=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -61,6 +63,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -95,6 +98,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -117,6 +121,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -143,14 +148,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -226,8 +258,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -321,7 +351,6 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00010000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 -# CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_OVERWRITE=y # CONFIG_CMDLINE_EXTEND is not set CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1" @@ -330,7 +359,6 @@ CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1" # Bus options # CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -429,10 +457,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # @@ -466,6 +490,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -482,6 +510,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -530,8 +559,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -565,7 +597,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y @@ -618,15 +652,16 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y @@ -704,6 +739,7 @@ CONFIG_8139TOO=y # CONFIG_TLAN is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -752,8 +788,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -776,6 +814,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -785,6 +824,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -862,7 +902,10 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y +# CONFIG_SPI_SH_MSIOF is not set CONFIG_SPI_SH_SCI=y +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -915,10 +958,12 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_MC13783 is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1055,6 +1100,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set @@ -1308,7 +1354,9 @@ CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1333,6 +1381,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -1474,10 +1523,11 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_STACKTRACE=y -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -1497,9 +1547,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y -CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000 -CONFIG_EARLY_PRINTK=y # CONFIG_DWARF_UNWINDER is not set # @@ -1508,7 +1555,11 @@ CONFIG_EARLY_PRINTK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig index 9215bbb13d6f..a8d538f06e67 100644 --- a/arch/sh/configs/rts7751r2dplus_defconfig +++ b/arch/sh/configs/rts7751r2dplus_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:39:48 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 13:26:39 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -31,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_IO_TRAPPED=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -61,6 +63,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -95,6 +98,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -117,6 +121,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -143,14 +148,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -226,8 +258,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -321,7 +351,6 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00010000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 -# CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_OVERWRITE=y # CONFIG_CMDLINE_EXTEND is not set CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1" @@ -330,7 +359,6 @@ CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1" # Bus options # CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -429,10 +457,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # @@ -552,6 +576,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -568,6 +596,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -616,8 +645,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -651,7 +683,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y @@ -704,15 +738,16 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y @@ -790,6 +825,7 @@ CONFIG_8139TOO=y # CONFIG_TLAN is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -838,8 +874,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -862,6 +900,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -871,6 +910,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -948,7 +988,10 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y +# CONFIG_SPI_SH_MSIOF is not set CONFIG_SPI_SH_SCI=y +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -1001,10 +1044,12 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_MC13783 is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1141,6 +1186,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set @@ -1394,7 +1440,9 @@ CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1419,6 +1467,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -1561,10 +1610,11 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_STACKTRACE=y -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -1584,9 +1634,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y -CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000 -CONFIG_EARLY_PRINTK=y # CONFIG_DWARF_UNWINDER is not set # @@ -1595,7 +1642,11 @@ CONFIG_EARLY_PRINTK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig index 055536b5c5cd..1859ba099945 100644 --- a/arch/sh/configs/sdk7780_defconfig +++ b/arch/sh/configs/sdk7780_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:40:25 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 13:27:20 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -30,6 +31,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -63,6 +65,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -99,6 +102,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -119,6 +123,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -145,14 +150,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -239,8 +271,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -291,9 +321,9 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # DMA support # -CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y CONFIG_SH_DMA_IRQ_MULTI=y +CONFIG_SH_DMA_API=y CONFIG_NR_ONCHIP_DMA_CHANNELS=12 # CONFIG_NR_DMA_CHANNELS_BOOL is not set @@ -339,7 +369,6 @@ CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/n # Bus options # CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_LEGACY is not set @@ -347,7 +376,6 @@ CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_IOCTL=y @@ -445,6 +473,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -515,9 +544,6 @@ CONFIG_NET_SCH_FIFO=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -558,6 +584,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -663,8 +693,11 @@ CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -698,7 +731,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set @@ -753,15 +788,16 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -827,14 +863,20 @@ CONFIG_SMC91X=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NET_POCKET is not set # CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -861,6 +903,7 @@ CONFIG_NETCONSOLE=y CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -870,6 +913,7 @@ CONFIG_NET_POLL_CONTROLLER=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -922,6 +966,7 @@ CONFIG_SERIO=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -1009,6 +1054,7 @@ CONFIG_SSB_DRIVER_PCICORE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -1534,8 +1580,6 @@ CONFIG_BRANCH_PROFILE_NONE=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_SH_STANDARD_BIOS=y -# CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_EARLY_PRINTK is not set # CONFIG_STACK_DEBUG is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set @@ -1549,7 +1593,11 @@ CONFIG_DUMP_CODE=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index 1cd1777aa436..43e6780a89d1 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:45:28 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 13:30:00 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -30,6 +30,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -64,6 +65,7 @@ CONFIG_AUDIT_TREE=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set CONFIG_RCU_TRACE=y CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -115,6 +117,7 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -122,11 +125,13 @@ CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_EVENTS=y CONFIG_EVENT_PROFILE=y # CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y +# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=y @@ -135,6 +140,7 @@ CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -156,19 +162,47 @@ CONFIG_BLOCK=y CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set +# CONFIG_BLK_CGROUP is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -243,7 +277,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # @@ -438,9 +471,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -551,6 +581,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -605,11 +639,11 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -685,6 +719,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -738,7 +773,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -762,6 +799,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -911,6 +949,7 @@ CONFIG_FRAME_POINTER=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y @@ -947,7 +986,6 @@ CONFIG_BRANCH_PROFILE_NONE=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_STACK_DEBUG is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_DUMP_CODE=y @@ -960,7 +998,11 @@ CONFIG_DUMP_CODE=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index 5531444b808c..ec494e32fa2e 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:46:55 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 13:30:41 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_CMT=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -30,6 +31,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -61,6 +63,7 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -99,6 +102,7 @@ CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -117,6 +121,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -126,6 +131,7 @@ CONFIG_HAVE_DMA_API_DEBUG=y # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -142,14 +148,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # @@ -228,8 +261,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -263,7 +294,6 @@ CONFIG_SH_7343_SOLUTION_ENGINE=y # CONFIG_SH_TIMER_TMU=y # CONFIG_SH_TIMER_CMT is not set -CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_CLK_CPG=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set @@ -413,9 +443,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -525,6 +552,10 @@ CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set @@ -585,8 +616,8 @@ CONFIG_MII=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -628,6 +659,7 @@ CONFIG_USB_NET_DM9601=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -724,7 +756,6 @@ CONFIG_I2C_SH_MOBILE=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -753,15 +784,18 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1173,10 +1207,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y @@ -1189,9 +1224,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y -CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000 -CONFIG_EARLY_PRINTK=y # CONFIG_DWARF_UNWINDER is not set # @@ -1200,7 +1232,11 @@ CONFIG_EARLY_PRINTK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig index 6921b199b1d6..ee87e2b2168f 100644 --- a/arch/sh/configs/se7619_defconfig +++ b/arch/sh/configs/se7619_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:50:05 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 13:34:15 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -29,6 +29,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -54,6 +55,7 @@ CONFIG_KERNEL_GZIP=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -84,6 +86,7 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -95,11 +98,13 @@ CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -120,14 +125,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -201,7 +233,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # @@ -401,6 +432,10 @@ CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_BLK_DEV_HD is not set @@ -432,6 +467,7 @@ CONFIG_HAVE_IDE=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -508,6 +544,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -575,6 +612,7 @@ CONFIG_RTC_LIB=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -661,10 +699,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y @@ -677,7 +716,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -685,7 +723,11 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig index 3abb06879f02..03f4219f2086 100644 --- a/arch/sh/configs/se7705_defconfig +++ b/arch/sh/configs/se7705_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:50:52 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 13:34:37 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -29,6 +29,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -59,6 +60,7 @@ CONFIG_KERNEL_GZIP=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -94,6 +96,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -111,6 +114,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -136,14 +140,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -219,8 +250,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -403,9 +432,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -510,6 +536,10 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -564,11 +594,11 @@ CONFIG_STNIC=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -598,6 +628,7 @@ CONFIG_SLHC=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -625,6 +656,7 @@ CONFIG_SERIO=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -696,6 +728,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -765,6 +798,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -809,7 +843,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set @@ -877,10 +910,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y @@ -893,7 +927,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -901,7 +934,11 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig index 1a43cfecb392..cfa58199a368 100644 --- a/arch/sh/configs/se7712_defconfig +++ b/arch/sh/configs/se7712_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:53:32 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 13:44:56 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -28,6 +28,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -60,6 +61,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -95,6 +97,7 @@ CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -113,6 +116,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -138,14 +142,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -221,8 +252,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -452,9 +481,6 @@ CONFIG_NET_SCH_FIFO=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -565,6 +591,10 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set @@ -675,11 +705,11 @@ CONFIG_SH_ETH=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -757,6 +787,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -888,7 +919,6 @@ CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -1021,7 +1051,6 @@ CONFIG_BRANCH_PROFILE_NONE=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_STACK_DEBUG is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set @@ -1035,7 +1064,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig index b8a3c8c4bac3..201283c829a1 100644 --- a/arch/sh/configs/se7721_defconfig +++ b/arch/sh/configs/se7721_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:57:11 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 13:46:58 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -29,6 +29,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -61,6 +62,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -100,6 +102,7 @@ CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -118,6 +121,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -143,14 +147,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -226,8 +257,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -457,9 +486,6 @@ CONFIG_NET_SCH_FIFO=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -570,6 +596,10 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set @@ -642,8 +672,8 @@ CONFIG_NETDEVICES=y CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -672,6 +702,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -765,6 +796,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -1029,7 +1061,6 @@ CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -1186,7 +1217,6 @@ CONFIG_BRANCH_PROFILE_NONE=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_STACK_DEBUG is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set @@ -1200,7 +1230,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig index d709b7f35ace..4a4efd261d03 100644 --- a/arch/sh/configs/se7722_defconfig +++ b/arch/sh/configs/se7722_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:57:41 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 13:49:15 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_CMT=y CONFIG_SYS_SUPPORTS_TMU=y @@ -31,6 +32,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -63,6 +65,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -102,6 +105,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -122,6 +126,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -149,14 +154,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # @@ -248,8 +280,6 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -284,7 +314,6 @@ CONFIG_SH_7722_SOLUTION_ENGINE=y # CONFIG_SH_TIMER_TMU=y # CONFIG_SH_TIMER_CMT is not set -CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_CLK_CPG=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y @@ -436,9 +465,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -467,6 +493,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -560,11 +590,11 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -584,6 +614,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -622,6 +653,7 @@ CONFIG_SERIO=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -694,6 +726,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -774,7 +807,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -906,7 +941,7 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -924,8 +959,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y -# CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_EARLY_PRINTK is not set # CONFIG_DWARF_UNWINDER is not set # @@ -934,7 +967,11 @@ CONFIG_SH_STANDARD_BIOS=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig index 56b0b9ff9e05..ab371afe3595 100644 --- a/arch/sh/configs/se7724_defconfig +++ b/arch/sh/configs/se7724_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Fri Sep 25 11:50:59 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 14:36:56 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_CMT=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -30,6 +31,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -62,6 +64,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -99,6 +102,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -116,6 +120,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -142,14 +147,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # @@ -205,6 +237,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 CONFIG_29BIT=y +# CONFIG_PMB_ENABLE is not set # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -229,8 +262,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -265,7 +296,6 @@ CONFIG_SH_7724_SOLUTION_ENGINE=y # CONFIG_SH_TIMER_TMU=y # CONFIG_SH_TIMER_CMT is not set -CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_CLK_CPG=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set @@ -279,8 +309,8 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # DMA support # -CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y +CONFIG_SH_DMA_API=y CONFIG_NR_ONCHIP_DMA_CHANNELS=12 # CONFIG_NR_DMA_CHANNELS_BOOL is not set @@ -423,9 +453,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -555,6 +582,10 @@ CONFIG_MTD_UBI_BEB_RESERVE=1 CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -565,9 +596,12 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -578,6 +612,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -672,11 +707,12 @@ CONFIG_SMC91X=y # CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -705,6 +741,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -813,7 +850,6 @@ CONFIG_I2C_SH_MOBILE=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -827,7 +863,10 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=y # CONFIG_SPI_GPIO is not set +# CONFIG_SPI_SH_MSIOF is not set # CONFIG_SPI_SH_SCI is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -885,11 +924,13 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set @@ -897,6 +938,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set CONFIG_MEDIA_SUPPORT=y @@ -913,6 +956,8 @@ CONFIG_VIDEO_MEDIA=m # # Multimedia drivers # +CONFIG_IR_CORE=y +CONFIG_VIDEO_IR=y # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=m # CONFIG_MEDIA_TUNER_CUSTOMISE is not set @@ -932,6 +977,7 @@ CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_IR_I2C=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set @@ -940,10 +986,13 @@ CONFIG_SOC_CAMERA=y # CONFIG_SOC_CAMERA_MT9M001 is not set # CONFIG_SOC_CAMERA_MT9M111 is not set # CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9T112 is not set # CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_RJ54N1 is not set # CONFIG_SOC_CAMERA_TW9910 is not set # CONFIG_SOC_CAMERA_PLATFORM is not set CONFIG_SOC_CAMERA_OV772X=y +# CONFIG_SOC_CAMERA_OV9640 is not set CONFIG_VIDEO_SH_MOBILE_CEU=y CONFIG_V4L_USB_DRIVERS=y # CONFIG_USB_VIDEO_CLASS is not set @@ -961,6 +1010,7 @@ CONFIG_USB_GSPCA=m # CONFIG_USB_GSPCA_OV519 is not set # CONFIG_USB_GSPCA_OV534 is not set # CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7302 is not set # CONFIG_USB_GSPCA_PAC7311 is not set # CONFIG_USB_GSPCA_SN9C20X is not set # CONFIG_USB_GSPCA_SONIXB is not set @@ -974,6 +1024,7 @@ CONFIG_USB_GSPCA=m # CONFIG_USB_GSPCA_SQ905 is not set # CONFIG_USB_GSPCA_SQ905C is not set # CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_STV0680 is not set # CONFIG_USB_GSPCA_SUNPLUS is not set # CONFIG_USB_GSPCA_T613 is not set # CONFIG_USB_GSPCA_TV8532 is not set @@ -1110,9 +1161,11 @@ CONFIG_SND_SOC_WM_HUBS=m CONFIG_SND_SOC_AD1836=m CONFIG_SND_SOC_AD1938=m CONFIG_SND_SOC_AD73311=m +CONFIG_SND_SOC_ADS117X=m CONFIG_SND_SOC_AK4104=m CONFIG_SND_SOC_AK4535=m CONFIG_SND_SOC_AK4642=m +CONFIG_SND_SOC_AK4671=m CONFIG_SND_SOC_CS4270=m CONFIG_SND_SOC_L3=m CONFIG_SND_SOC_PCM3008=m @@ -1121,11 +1174,14 @@ CONFIG_SND_SOC_SSM2602=m CONFIG_SND_SOC_TLV320AIC23=m CONFIG_SND_SOC_TLV320AIC26=m CONFIG_SND_SOC_TLV320AIC3X=m +CONFIG_SND_SOC_TLV320DAC33=m CONFIG_SND_SOC_UDA134X=m CONFIG_SND_SOC_UDA1380=m CONFIG_SND_SOC_WM8510=m CONFIG_SND_SOC_WM8523=m CONFIG_SND_SOC_WM8580=m +CONFIG_SND_SOC_WM8711=m +CONFIG_SND_SOC_WM8727=m CONFIG_SND_SOC_WM8728=m CONFIG_SND_SOC_WM8731=m CONFIG_SND_SOC_WM8750=m @@ -1143,6 +1199,7 @@ CONFIG_SND_SOC_WM8990=m CONFIG_SND_SOC_WM8993=m CONFIG_SND_SOC_WM9081=m CONFIG_SND_SOC_MAX9877=m +CONFIG_SND_SOC_TPA6130A2=m # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1316,10 +1373,12 @@ CONFIG_USB_ETH_RNDIS=y CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set +# CONFIG_USB_MASS_STORAGE is not set CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_MULTI is not set # # OTG and related infrastructure @@ -1345,6 +1404,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_AT91 is not set # CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_SPI=y +# CONFIG_MMC_TMIO is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set @@ -1376,6 +1436,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1404,7 +1465,9 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1597,7 +1660,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1614,7 +1677,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -1623,7 +1685,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig index 7bc926c17b79..b15a44e2ec43 100644 --- a/arch/sh/configs/se7750_defconfig +++ b/arch/sh/configs/se7750_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 18:58:58 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 14:39:10 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -29,6 +30,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -60,6 +62,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -95,6 +98,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -113,6 +117,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -138,14 +143,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -221,8 +253,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -307,7 +337,6 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_OVERWRITE is not set # CONFIG_CMDLINE_EXTEND is not set @@ -406,9 +435,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -513,6 +539,10 @@ CONFIG_MTD_ROM=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set @@ -615,11 +645,11 @@ CONFIG_STNIC=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -726,6 +756,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -785,6 +816,7 @@ CONFIG_RTC_LIB=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -914,10 +946,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y @@ -930,7 +963,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -939,7 +971,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig index c20ae5e35c81..d1effdeaa416 100644 --- a/arch/sh/configs/se7751_defconfig +++ b/arch/sh/configs/se7751_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 19:01:41 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 14:39:56 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -29,6 +30,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -60,6 +62,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -98,6 +101,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -116,6 +120,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -141,14 +146,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -224,8 +256,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -311,7 +341,6 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00010000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 -# CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_OVERWRITE=y # CONFIG_CMDLINE_EXTEND is not set CONFIG_CMDLINE="console=ttySC1,38400" @@ -430,9 +459,6 @@ CONFIG_IP_NF_QUEUE=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -537,6 +563,10 @@ CONFIG_MTD_RAM=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -591,11 +621,11 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -693,6 +723,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -754,6 +785,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -863,10 +895,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y @@ -879,7 +912,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -888,7 +920,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig index 82baeef40a96..58533d50f06e 100644 --- a/arch/sh/configs/se7780_defconfig +++ b/arch/sh/configs/se7780_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 19:03:59 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 14:40:32 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -30,6 +31,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -59,6 +61,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -92,6 +95,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -110,6 +114,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -136,14 +141,41 @@ CONFIG_BLK_DEV_BSG=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -222,8 +254,6 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -313,7 +343,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" # Bus options # CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -401,9 +430,6 @@ CONFIG_IPV6=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -517,6 +543,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -574,8 +604,11 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -608,7 +641,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y @@ -642,6 +677,8 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_JMICRON is not set @@ -650,14 +687,15 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set @@ -748,14 +786,16 @@ CONFIG_NET_PCI=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_ATMEL is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -774,6 +814,7 @@ CONFIG_WLAN=y # CONFIG_NET_FC is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -783,6 +824,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -883,6 +925,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -1149,6 +1192,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -1285,7 +1329,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1303,7 +1347,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -1312,7 +1355,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig index dd0e8900afb7..666fde110b27 100644 --- a/arch/sh/configs/sh03_defconfig +++ b/arch/sh/configs/sh03_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 19:07:14 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 14:41:25 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -21,6 +21,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CMOS_UPDATE=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -31,6 +32,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -64,6 +66,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -102,6 +105,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -124,6 +128,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -151,14 +156,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -234,8 +266,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -320,7 +350,6 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00004000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 -# CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_OVERWRITE=y # CONFIG_CMDLINE_EXTEND is not set CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs" @@ -329,7 +358,6 @@ CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs" # Bus options # CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -433,9 +461,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -468,6 +493,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -580,8 +609,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -614,7 +646,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -685,6 +719,7 @@ CONFIG_8139CP=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -733,8 +768,9 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -748,6 +784,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -757,6 +794,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -886,6 +924,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -1149,10 +1188,11 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_STACKTRACE=y -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -1172,8 +1212,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y -# CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_EARLY_PRINTK is not set # CONFIG_DWARF_UNWINDER is not set # @@ -1182,7 +1220,11 @@ CONFIG_SH_STANDARD_BIOS=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig index 662156ec9211..35a3beeba182 100644 --- a/arch/sh/configs/sh7710voipgw_defconfig +++ b/arch/sh/configs/sh7710voipgw_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 19:11:49 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 14:43:04 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -29,6 +29,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -60,6 +61,7 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -98,6 +100,7 @@ CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -116,6 +119,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -142,14 +146,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -225,8 +256,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -460,9 +489,6 @@ CONFIG_NET_SCH_FIFO=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -571,6 +597,10 @@ CONFIG_MTD_RAM=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set @@ -623,11 +653,11 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -647,6 +677,7 @@ CONFIG_PHONE=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -725,6 +756,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -792,6 +824,7 @@ CONFIG_RTC_LIB=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -836,7 +869,6 @@ CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -899,10 +931,11 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y @@ -916,7 +949,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -925,7 +957,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/sh7724_generic_defconfig b/arch/sh/configs/sh7724_generic_defconfig index e06719a30ba1..a3056b69d2ba 100644 --- a/arch/sh/configs/sh7724_generic_defconfig +++ b/arch/sh/configs/sh7724_generic_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 19:14:00 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 15:03:45 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_CMT=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -30,6 +31,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -49,7 +51,6 @@ CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_LZMA is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # @@ -57,6 +58,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -80,11 +82,9 @@ CONFIG_CGROUPS=y # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -100,6 +100,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -120,6 +121,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -136,19 +138,48 @@ CONFIG_BLOCK=y CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set +# CONFIG_BLK_CGROUP is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_CFQ_GROUP_IOSCHED is not set # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # @@ -204,6 +235,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y +# CONFIG_PMB_ENABLE is not set # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -225,17 +257,12 @@ CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y - -# -# Memory hotplug is currently incompatible with Software Suspend -# +# CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -269,7 +296,6 @@ CONFIG_CPU_HAS_FPU=y # CONFIG_SH_TIMER_TMU=y CONFIG_SH_TIMER_CMT=y -CONFIG_SH_PCLK_FREQ=41666666 CONFIG_SH_CLK_CPG=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y @@ -388,6 +414,10 @@ CONFIG_EXTRA_FIRMWARE="" CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_BLK_DEV_HD is not set @@ -476,7 +506,6 @@ CONFIG_I2C_SH_MOBILE=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -505,15 +534,18 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -561,6 +593,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -581,7 +614,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -608,6 +643,7 @@ CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -675,11 +711,10 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_STACKTRACE=y -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -699,7 +734,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -707,7 +741,11 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set CONFIG_BINARY_PRINTF=y diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig index 194ff703e23d..04b841b29427 100644 --- a/arch/sh/configs/sh7763rdp_defconfig +++ b/arch/sh/configs/sh7763rdp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 19:15:37 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 15:05:29 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -29,6 +30,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -59,6 +61,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -103,6 +106,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -124,6 +128,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -150,14 +155,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -211,6 +243,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y +# CONFIG_PMB_ENABLE is not set CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -237,8 +270,6 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -421,10 +452,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # @@ -509,7 +536,6 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_PHYSMAP_COMPAT is not set -# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_PLATRAM is not set # @@ -542,6 +568,10 @@ CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set @@ -640,11 +670,12 @@ CONFIG_SH_ETH=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -673,6 +704,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -756,6 +788,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -949,6 +982,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_AT91 is not set # CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_TMIO is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set @@ -1129,10 +1163,11 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_STACKTRACE=y -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -1152,7 +1187,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -1161,7 +1195,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/sh7770_generic_defconfig b/arch/sh/configs/sh7770_generic_defconfig index 34bed5541f31..7b247053ece6 100644 --- a/arch/sh/configs/sh7770_generic_defconfig +++ b/arch/sh/configs/sh7770_generic_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 19:17:16 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 15:06:28 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -29,6 +30,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -48,7 +50,6 @@ CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_LZMA is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # @@ -56,6 +57,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -79,11 +81,9 @@ CONFIG_CGROUPS=y # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -99,6 +99,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -119,6 +120,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -135,19 +137,48 @@ CONFIG_BLOCK=y CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set +# CONFIG_BLK_CGROUP is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_CFQ_GROUP_IOSCHED is not set # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # @@ -201,6 +232,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y +# CONFIG_PMB_ENABLE is not set CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -221,17 +253,12 @@ CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y - -# -# Memory hotplug is currently incompatible with Software Suspend -# +# CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -379,6 +406,10 @@ CONFIG_EXTRA_FIRMWARE="" CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_BLK_DEV_HD is not set @@ -467,7 +498,6 @@ CONFIG_I2C_SH_MOBILE=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -496,15 +526,18 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -552,6 +585,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -572,7 +606,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -599,6 +635,7 @@ CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -666,11 +703,10 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_STACKTRACE=y -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -690,7 +726,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -698,7 +733,11 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set CONFIG_BINARY_PRINTF=y diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig index 51cbaedf7a56..8330813b0c1d 100644 --- a/arch/sh/configs/sh7785lcr_32bit_defconfig +++ b/arch/sh/configs/sh7785lcr_32bit_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Fri Sep 25 11:39:20 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 15:07:40 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_SYS_SUPPORTS_TMU=y @@ -31,6 +32,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -64,6 +66,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -103,6 +106,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -126,6 +130,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -153,14 +158,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -253,8 +285,6 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -287,7 +317,6 @@ CONFIG_SH_SH7785LCR=y # Timer and clock configuration # CONFIG_SH_TIMER_TMU=y -CONFIG_SH_PCLK_FREQ=50000000 CONFIG_SH_CLK_CPG=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y @@ -360,7 +389,6 @@ CONFIG_ENTRY_OFFSET=0x00001000 # Bus options # CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_LEGACY is not set @@ -470,10 +498,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # @@ -588,6 +612,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -688,15 +716,16 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -777,6 +806,7 @@ CONFIG_R8169=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -786,6 +816,7 @@ CONFIG_R8169=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -841,6 +872,7 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -923,11 +955,6 @@ CONFIG_I2C_ALGOPCA=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -937,7 +964,6 @@ CONFIG_I2C_PCA_PLATFORM=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -986,15 +1012,18 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1129,6 +1158,7 @@ CONFIG_SND_CMIPCI=y # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set @@ -1363,6 +1393,7 @@ CONFIG_MMC_SDHCI_PLTFM=m # CONFIG_MMC_AT91 is not set # CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_TIFM_SD is not set +# CONFIG_MMC_TMIO is not set # CONFIG_MMC_CB710 is not set # CONFIG_MMC_VIA_SDMMC is not set # CONFIG_MEMSTICK is not set @@ -1397,6 +1428,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1417,7 +1449,9 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1622,13 +1656,14 @@ CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_TRACE_IRQFLAGS=y CONFIG_STACKTRACE=y -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set CONFIG_FRAME_POINTER=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE_NMI_ENTER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y @@ -1637,6 +1672,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_TRACER_MAX_TRACE=y CONFIG_RING_BUFFER=y +CONFIG_FTRACE_NMI_ENTER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y @@ -1668,7 +1704,6 @@ CONFIG_FTRACE_MCOUNT_RECORD=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set CONFIG_DWARF_UNWINDER=y CONFIG_MCOUNT=y @@ -1678,7 +1713,11 @@ CONFIG_MCOUNT=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig index 8c2c47ed3991..f196e87c7665 100644 --- a/arch/sh/configs/sh7785lcr_defconfig +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 19:23:18 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 15:09:09 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_SYS_SUPPORTS_TMU=y @@ -31,6 +32,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -63,6 +65,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -103,12 +106,14 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_COMPAT_BRK=y @@ -123,6 +128,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -149,14 +155,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -237,8 +270,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -271,7 +302,6 @@ CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y # Timer and clock configuration # CONFIG_SH_TIMER_TMU=y -CONFIG_SH_PCLK_FREQ=50000000 CONFIG_SH_CLK_CPG=y CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set @@ -329,7 +359,6 @@ CONFIG_ENTRY_OFFSET=0x00001000 # Bus options # CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -433,10 +462,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # @@ -552,6 +577,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -652,15 +681,16 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -719,8 +749,10 @@ CONFIG_R8169=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -743,6 +775,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -752,6 +785,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -873,11 +907,6 @@ CONFIG_I2C_ALGOPCA=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -887,7 +916,6 @@ CONFIG_I2C_PCA_PLATFORM=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -916,15 +944,18 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1205,6 +1236,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1225,7 +1257,9 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1484,7 +1518,6 @@ CONFIG_BRANCH_PROFILE_NONE=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_STACK_DEBUG is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set @@ -1498,7 +1531,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig index 92115e612750..45441c0ab30c 100644 --- a/arch/sh/configs/shmin_defconfig +++ b/arch/sh/configs/shmin_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 19:27:17 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 15:10:09 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -28,6 +28,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -57,6 +58,7 @@ CONFIG_KERNEL_GZIP=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -88,6 +90,7 @@ CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -105,6 +108,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -124,14 +128,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -207,8 +238,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -387,9 +416,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -495,6 +521,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set @@ -546,11 +576,11 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -629,6 +659,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -688,6 +719,7 @@ CONFIG_RTC_LIB=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -731,7 +763,6 @@ CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y # CONFIG_SYSFS is not set -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set @@ -794,6 +825,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y @@ -806,8 +838,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y -# CONFIG_EARLY_SCIF_CONSOLE is not set -CONFIG_EARLY_PRINTK=y # CONFIG_DWARF_UNWINDER is not set # @@ -815,7 +845,11 @@ CONFIG_EARLY_PRINTK=y # # CONFIG_KEYS is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig index e3858d757d5e..ecf50cda4cbc 100644 --- a/arch/sh/configs/shx3_defconfig +++ b/arch/sh/configs/shx3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 19:29:26 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 15:10:45 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -22,6 +22,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_LOCKBREAK=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_TMU=y @@ -32,6 +33,8 @@ CONFIG_LOCKDEP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_COHERENT=y +# CONFIG_DMA_NONCOHERENT is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -66,6 +69,7 @@ CONFIG_AUDIT_TREE=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set CONFIG_RCU_TRACE=y CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -121,6 +125,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -128,6 +133,7 @@ CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_EVENTS=y CONFIG_EVENT_PROFILE=y # CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set @@ -143,6 +149,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -166,19 +173,48 @@ CONFIG_BLOCK=y CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set +# CONFIG_BLK_CGROUP is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_CFQ_GROUP_IOSCHED is not set # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_FREEZER=y # @@ -233,6 +269,7 @@ CONFIG_FORCE_MAX_ZONEORDER=7 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_29BIT=y +# CONFIG_PMB_ENABLE is not set # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y CONFIG_NUMA=y @@ -271,10 +308,9 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_SCHED_MC=y # # Cache configuration @@ -449,6 +485,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -496,7 +533,13 @@ CONFIG_CAN_VCAN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -522,6 +565,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -532,9 +579,12 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -624,11 +674,12 @@ CONFIG_SMC91X=y # CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -726,7 +777,6 @@ CONFIG_I2C_HELPER_AUTO=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -740,7 +790,10 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_SH_MSIOF is not set # CONFIG_SPI_SH_SCI is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -781,15 +834,16 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -924,10 +978,12 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ETH is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_MASS_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_MULTI is not set # # OTG and related infrastructure @@ -965,6 +1021,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -993,7 +1050,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1244,8 +1303,6 @@ CONFIG_BRANCH_PROFILE_NONE=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_SH_STANDARD_BIOS=y -# CONFIG_EARLY_SCIF_CONSOLE is not set -CONFIG_EARLY_PRINTK=y # CONFIG_STACK_DEBUG is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_DUMP_CODE=y @@ -1258,7 +1315,11 @@ CONFIG_DUMP_CODE=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig index cb919a0de4b2..98352d757851 100644 --- a/arch/sh/configs/snapgear_defconfig +++ b/arch/sh/configs/snapgear_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 19:33:00 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 15:14:18 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -30,6 +31,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -59,6 +61,7 @@ CONFIG_KERNEL_GZIP=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -97,6 +100,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -115,6 +119,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -136,14 +141,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -219,8 +251,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -272,9 +302,9 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # DMA support # -CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y CONFIG_SH_DMA_IRQ_MULTI=y +CONFIG_SH_DMA_API=y CONFIG_NR_ONCHIP_DMA_CHANNELS=8 # CONFIG_NR_DMA_CHANNELS_BOOL is not set @@ -313,7 +343,6 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_OVERWRITE is not set # CONFIG_CMDLINE_EXTEND is not set @@ -321,7 +350,6 @@ CONFIG_ENTRY_OFFSET=0x00001000 # Bus options # CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -407,9 +435,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -524,6 +549,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -616,6 +645,7 @@ CONFIG_8139TOO_PIO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -623,8 +653,9 @@ CONFIG_8139TOO_PIO=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -637,6 +668,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -646,6 +678,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -728,6 +761,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -787,7 +821,9 @@ CONFIG_RTC_DRV_DS1302=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -812,6 +848,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -915,10 +952,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y @@ -931,7 +969,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -940,7 +977,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig index b9fe960309f5..72982e360e3f 100644 --- a/arch/sh/configs/systemh_defconfig +++ b/arch/sh/configs/systemh_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 19:35:03 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 15:14:50 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -29,6 +30,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -56,6 +58,7 @@ CONFIG_SWAP=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -94,6 +97,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -112,6 +116,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -138,14 +143,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -221,8 +253,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -310,7 +340,6 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_OVERWRITE is not set # CONFIG_CMDLINE_EXTEND is not set @@ -349,6 +378,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=1024 @@ -390,6 +423,7 @@ CONFIG_SERIO=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -458,6 +492,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -517,6 +552,7 @@ CONFIG_RTC_LIB=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -609,10 +645,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y @@ -625,7 +662,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -634,7 +670,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig index 2ca79ed9fb62..78c257053c79 100644 --- a/arch/sh/configs/titan_defconfig +++ b/arch/sh/configs/titan_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 19:36:36 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 15:17:20 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_SYS_SUPPORTS_TMU=y CONFIG_STACKTRACE_SUPPORT=y @@ -30,6 +31,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -61,6 +63,7 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -101,6 +104,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -120,13 +124,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -146,14 +151,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -229,8 +261,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -282,9 +312,9 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # DMA support # -CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y CONFIG_SH_DMA_IRQ_MULTI=y +CONFIG_SH_DMA_API=y CONFIG_NR_ONCHIP_DMA_CHANNELS=8 # CONFIG_NR_DMA_CHANNELS_BOOL is not set @@ -323,7 +353,6 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x009e0000 CONFIG_ENTRY_OFFSET=0x00001000 -# CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_OVERWRITE=y # CONFIG_CMDLINE_EXTEND is not set CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw" @@ -332,7 +361,6 @@ CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw" # Bus options # CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -425,6 +453,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=y # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -614,10 +643,6 @@ CONFIG_NET_SCH_FIFO=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # @@ -743,6 +768,11 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -807,8 +837,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -841,7 +874,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -935,6 +970,7 @@ CONFIG_8139_OLD_RX_RESET=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -983,8 +1019,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1033,6 +1071,7 @@ CONFIG_SLIP_SMART=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -1042,6 +1081,7 @@ CONFIG_SLIP_SMART=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -1172,6 +1212,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -1409,7 +1450,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1664,6 +1707,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -1691,7 +1735,6 @@ CONFIG_BRANCH_PROFILE_NONE=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_STACK_DEBUG is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set @@ -1705,7 +1748,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig index b012ca77f029..4fa03bf086dd 100644 --- a/arch/sh/configs/ul2_defconfig +++ b/arch/sh/configs/ul2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 19:42:33 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 15:18:53 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_CMT=y CONFIG_SYS_SUPPORTS_TMU=y @@ -31,6 +32,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_NONCOHERENT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -63,6 +65,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -102,6 +105,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters @@ -122,6 +126,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -148,14 +153,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # @@ -247,8 +279,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -280,7 +310,6 @@ CONFIG_CPU_HAS_DSP=y # CONFIG_SH_TIMER_TMU=y # CONFIG_SH_TIMER_CMT is not set -CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_CLK_CPG=y CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set @@ -435,14 +464,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_SPY=y CONFIG_CFG80211=y # CONFIG_NL80211_TESTMODE is not set # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set CONFIG_CFG80211_DEFAULT_PS=y -CONFIG_CFG80211_DEFAULT_PS_VALUE=1 # CONFIG_WIRELESS_OLD_REGULATORY is not set -CONFIG_WIRELESS_EXT=y +CONFIG_CFG80211_WEXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=m # CONFIG_LIB80211_DEBUG is not set @@ -559,6 +591,10 @@ CONFIG_MTD_RAM=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -576,6 +612,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -653,30 +690,29 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -CONFIG_LIBERTAS=m -# CONFIG_LIBERTAS_USB is not set -CONFIG_LIBERTAS_SDIO=m -CONFIG_LIBERTAS_DEBUG=y # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_AT76C50X_USB is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_RTL8187 is not set # CONFIG_MAC80211_HWSIM is not set -# CONFIG_P54_COMMON is not set # CONFIG_ATH_COMMON is not set -# CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set -# CONFIG_ZD1211RW is not set +# CONFIG_HOSTAP is not set +# CONFIG_IWM is not set +CONFIG_LIBERTAS=m +# CONFIG_LIBERTAS_USB is not set +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_DEBUG=y +# CONFIG_P54_COMMON is not set # CONFIG_RT2X00 is not set # CONFIG_WL12XX is not set -# CONFIG_IWM is not set +# CONFIG_ZD1211RW is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -718,6 +754,7 @@ CONFIG_USB_NET_CDCETHER=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -810,6 +847,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set @@ -951,6 +989,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_AT91 is not set # CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_TMIO is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set @@ -1133,7 +1172,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1150,7 +1189,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DWARF_UNWINDER is not set # @@ -1159,7 +1197,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig index 9f8aee5bc559..23bda1916f4d 100644 --- a/arch/sh/configs/urquell_defconfig +++ b/arch/sh/configs/urquell_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 19:46:13 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 15:27:53 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_ARCH_SUSPEND_POSSIBLE is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_PCI=y @@ -32,6 +33,8 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_DMA_COHERENT=y +# CONFIG_DMA_NONCOHERENT is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -66,6 +69,7 @@ CONFIG_AUDIT_TREE=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -120,12 +124,14 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_COMPAT_BRK=y @@ -140,6 +146,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y @@ -162,19 +169,48 @@ CONFIG_BLOCK=y CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set +# CONFIG_BLK_CGROUP is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_CFQ_GROUP_IOSCHED is not set # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # @@ -229,6 +265,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 CONFIG_29BIT=y +# CONFIG_PMB_ENABLE is not set # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y # CONFIG_NUMA is not set @@ -263,8 +300,6 @@ CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -356,7 +391,6 @@ CONFIG_ENTRY_OFFSET=0x00001000 # Bus options # CONFIG_PCI=y -# CONFIG_SH_PCIDMA_NONCOHERENT is not set CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y # CONFIG_PCIE_ECRC is not set @@ -469,10 +503,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # @@ -588,6 +618,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -688,15 +722,16 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -787,6 +822,7 @@ CONFIG_8139CP=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -818,8 +854,10 @@ CONFIG_SKY2_DEBUG=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -842,6 +880,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -851,6 +890,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -975,11 +1015,6 @@ CONFIG_I2C_ALGOPCA=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -989,7 +1024,6 @@ CONFIG_I2C_PCA_PLATFORM=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1020,6 +1054,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1062,6 +1097,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1101,6 +1137,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1116,16 +1153,19 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y # CONFIG_MFD_SM501_GPIO is not set +# CONFIG_MFD_SH_MOBILE_SDHI is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set CONFIG_MEDIA_SUPPORT=y @@ -1139,6 +1179,8 @@ CONFIG_MEDIA_SUPPORT=y # # Multimedia drivers # +CONFIG_IR_CORE=y +CONFIG_VIDEO_IR=y # CONFIG_DAB is not set # @@ -1417,6 +1459,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1437,7 +1480,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1466,7 +1511,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_EXT4_FS=y -# CONFIG_EXT4DEV_COMPAT is not set CONFIG_EXT4_FS_XATTR=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set @@ -1687,9 +1731,6 @@ CONFIG_TRACING_SUPPORT=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y -CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffeb0000 -CONFIG_EARLY_PRINTK=y # CONFIG_STACK_DEBUG is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set @@ -1703,7 +1744,11 @@ CONFIG_EARLY_PRINTK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # From 2f48912d1443a796f10c42c89cb386f0e3eca04d Mon Sep 17 00:00:00 2001 From: Daisuke HATAYAMA Date: Mon, 4 Jan 2010 15:42:14 +0900 Subject: [PATCH 0330/1626] binfmt_elf_fdpic: Fix build breakage introduced by coredump changes. Commit f6151dfea21496d43dbaba32cfcd9c9f404769bc introduces build breakage, so this patch fixes it together with some printk formatting cleanup. Signed-off-by: Daisuke HATAYAMA Signed-off-by: Paul Mundt --- fs/binfmt_elf_fdpic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index c25256a5c5b0..7dc85997e96c 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -1798,11 +1798,11 @@ static int elf_fdpic_core_dump(struct coredump_params *cprm) ELF_CORE_WRITE_EXTRA_DATA; #endif - if (file->f_pos != offset) { + if (cprm->file->f_pos != offset) { /* Sanity check */ printk(KERN_WARNING "elf_core_dump: file->f_pos (%lld) != offset (%lld)\n", - file->f_pos, offset); + cprm->file->f_pos, offset); } end_coredump: From 0dfc84c9f54d8784f5bc6d303c079d88000ee5f7 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 4 Jan 2010 14:44:42 +0800 Subject: [PATCH 0331/1626] [ARM] pxa: fix compiler warnings of unused variable 'id' in cpu_is_pxa9*() Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/hardware.h | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 50f1297bf5ac..e741bf1bfb2d 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -250,20 +250,17 @@ #define cpu_is_pxa930() \ ({ \ - unsigned int id = read_cpuid(CPUID_ID); \ - __cpu_is_pxa930(id); \ + __cpu_is_pxa930(read_cpuid_id()); \ }) #define cpu_is_pxa935() \ ({ \ - unsigned int id = read_cpuid(CPUID_ID); \ - __cpu_is_pxa935(id); \ + __cpu_is_pxa935(read_cpuid_id()); \ }) #define cpu_is_pxa950() \ ({ \ - unsigned int id = read_cpuid(CPUID_ID); \ - __cpu_is_pxa950(id); \ + __cpu_is_pxa950(read_cpuid_id()); \ }) From 6486cda6c6b15368e2c925d89b4e9ed13e67b91b Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Mon, 4 Jan 2010 09:05:42 +0100 Subject: [PATCH 0332/1626] [S390] qdio: convert global statistics to per-device stats Revamp the qdio performance statistics and move them from procfs to debugfs using the seq_file interface. Since the statistics are not intended for the general user the removal of /proc/qdio_perf should not surprise anyone. The per device statistics are disabled by default, writing 1 to //qdio//statistics enables the statistics for the given device. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/Makefile | 2 +- drivers/s390/cio/qdio.h | 36 +++++++- drivers/s390/cio/qdio_debug.c | 114 ++++++++++++++++++++++-- drivers/s390/cio/qdio_main.c | 71 +++++++-------- drivers/s390/cio/qdio_perf.c | 149 -------------------------------- drivers/s390/cio/qdio_perf.h | 62 ------------- drivers/s390/cio/qdio_thinint.c | 8 +- 7 files changed, 177 insertions(+), 265 deletions(-) delete mode 100644 drivers/s390/cio/qdio_perf.c delete mode 100644 drivers/s390/cio/qdio_perf.h diff --git a/drivers/s390/cio/Makefile b/drivers/s390/cio/Makefile index d033414f7599..e1b700a19648 100644 --- a/drivers/s390/cio/Makefile +++ b/drivers/s390/cio/Makefile @@ -10,5 +10,5 @@ obj-y += ccw_device.o cmf.o obj-$(CONFIG_CHSC_SCH) += chsc_sch.o obj-$(CONFIG_CCWGROUP) += ccwgroup.o -qdio-objs := qdio_main.o qdio_thinint.o qdio_debug.o qdio_perf.o qdio_setup.o +qdio-objs := qdio_main.o qdio_thinint.o qdio_debug.o qdio_setup.o obj-$(CONFIG_QDIO) += qdio.o diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h index ff7748a9199d..44f2f6a97f33 100644 --- a/drivers/s390/cio/qdio.h +++ b/drivers/s390/cio/qdio.h @@ -182,6 +182,34 @@ struct scssc_area { u32:32; } __attribute__ ((packed)); +struct qdio_dev_perf_stat { + unsigned int adapter_int; + unsigned int qdio_int; + unsigned int pci_request_int; + + unsigned int tasklet_inbound; + unsigned int tasklet_inbound_resched; + unsigned int tasklet_inbound_resched2; + unsigned int tasklet_outbound; + + unsigned int siga_read; + unsigned int siga_write; + unsigned int siga_sync; + + unsigned int inbound_call; + unsigned int inbound_handler; + unsigned int stop_polling; + unsigned int inbound_queue_full; + unsigned int outbound_call; + unsigned int outbound_handler; + unsigned int fast_requeue; + unsigned int target_full; + unsigned int eqbs; + unsigned int eqbs_partial; + unsigned int sqbs; + unsigned int sqbs_partial; +}; + struct qdio_input_q { /* input buffer acknowledgement flag */ int polling; @@ -269,6 +297,7 @@ struct qdio_irq { u32 *dsci; /* address of device state change indicator */ struct ccw_device *cdev; struct dentry *debugfs_dev; + struct dentry *debugfs_perf; unsigned long int_parm; struct subchannel_id schid; @@ -286,9 +315,10 @@ struct qdio_irq { struct ciw aqueue; struct qdio_ssqd_desc ssqd_desc; - void (*orig_handler) (struct ccw_device *, unsigned long, struct irb *); + struct qdio_dev_perf_stat perf_stat; + int perf_stat_enabled; /* * Warning: Leave these members together at the end so they won't be * cleared in qdio_setup_irq. @@ -311,6 +341,10 @@ struct qdio_irq { (irq->qib.qfmt == QDIO_IQDIO_QFMT || \ css_general_characteristics.aif_osa) +#define qperf(qdev,attr) qdev->perf_stat.attr +#define qperf_inc(q,attr) if (q->irq_ptr->perf_stat_enabled) \ + q->irq_ptr->perf_stat.attr++ + /* the highest iqdio queue is used for multicast */ static inline int multicast_outbound(struct qdio_q *q) { diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c index 76769978285f..f49761ff9a00 100644 --- a/drivers/s390/cio/qdio_debug.c +++ b/drivers/s390/cio/qdio_debug.c @@ -55,13 +55,11 @@ static int qstat_show(struct seq_file *m, void *v) if (!q) return 0; - seq_printf(m, "device state indicator: %d\n", *(u32 *)q->irq_ptr->dsci); - seq_printf(m, "nr_used: %d\n", atomic_read(&q->nr_buf_used)); - seq_printf(m, "ftc: %d\n", q->first_to_check); - seq_printf(m, "last_move: %d\n", q->last_move); - seq_printf(m, "polling: %d\n", q->u.in.polling); - seq_printf(m, "ack start: %d\n", q->u.in.ack_start); - seq_printf(m, "ack count: %d\n", q->u.in.ack_count); + seq_printf(m, "DSCI: %d nr_used: %d\n", + *(u32 *)q->irq_ptr->dsci, atomic_read(&q->nr_buf_used)); + seq_printf(m, "ftc: %d last_move: %d\n", q->first_to_check, q->last_move); + seq_printf(m, "polling: %d ack start: %d ack count: %d\n", + q->u.in.polling, q->u.in.ack_start, q->u.in.ack_count); seq_printf(m, "slsb buffer states:\n"); seq_printf(m, "|0 |8 |16 |24 |32 |40 |48 |56 63|\n"); @@ -110,7 +108,6 @@ static ssize_t qstat_seq_write(struct file *file, const char __user *buf, if (!q) return 0; - if (q->is_input_q) xchg(q->irq_ptr->dsci, 1); local_bh_disable(); @@ -134,6 +131,98 @@ static const struct file_operations debugfs_fops = { .release = single_release, }; +static char *qperf_names[] = { + "Assumed adapter interrupts", + "QDIO interrupts", + "Requested PCIs", + "Inbound tasklet runs", + "Inbound tasklet resched", + "Inbound tasklet resched2", + "Outbound tasklet runs", + "SIGA read", + "SIGA write", + "SIGA sync", + "Inbound calls", + "Inbound handler", + "Inbound stop_polling", + "Inbound queue full", + "Outbound calls", + "Outbound handler", + "Outbound fast_requeue", + "Outbound target_full", + "QEBSM eqbs", + "QEBSM eqbs partial", + "QEBSM sqbs", + "QEBSM sqbs partial" +}; + +static int qperf_show(struct seq_file *m, void *v) +{ + struct qdio_irq *irq_ptr = m->private; + unsigned int *stat; + int i; + + if (!irq_ptr) + return 0; + if (!irq_ptr->perf_stat_enabled) { + seq_printf(m, "disabled\n"); + return 0; + } + stat = (unsigned int *)&irq_ptr->perf_stat; + + for (i = 0; i < ARRAY_SIZE(qperf_names); i++) + seq_printf(m, "%26s:\t%u\n", + qperf_names[i], *(stat + i)); + return 0; +} + +static ssize_t qperf_seq_write(struct file *file, const char __user *ubuf, + size_t count, loff_t *off) +{ + struct seq_file *seq = file->private_data; + struct qdio_irq *irq_ptr = seq->private; + unsigned long val; + char buf[8]; + int ret; + + if (!irq_ptr) + return 0; + if (count >= sizeof(buf)) + return -EINVAL; + if (copy_from_user(&buf, ubuf, count)) + return -EFAULT; + buf[count] = 0; + + ret = strict_strtoul(buf, 10, &val); + if (ret < 0) + return ret; + + switch (val) { + case 0: + irq_ptr->perf_stat_enabled = 0; + memset(&irq_ptr->perf_stat, 0, sizeof(irq_ptr->perf_stat)); + break; + case 1: + irq_ptr->perf_stat_enabled = 1; + break; + } + return count; +} + +static int qperf_seq_open(struct inode *inode, struct file *filp) +{ + return single_open(filp, qperf_show, + filp->f_path.dentry->d_inode->i_private); +} + +static struct file_operations debugfs_perf_fops = { + .owner = THIS_MODULE, + .open = qperf_seq_open, + .read = seq_read, + .write = qperf_seq_write, + .llseek = seq_lseek, + .release = single_release, +}; static void setup_debugfs_entry(struct qdio_q *q, struct ccw_device *cdev) { char name[QDIO_DEBUGFS_NAME_LEN]; @@ -156,6 +245,14 @@ void qdio_setup_debug_entries(struct qdio_irq *irq_ptr, struct ccw_device *cdev) debugfs_root); if (IS_ERR(irq_ptr->debugfs_dev)) irq_ptr->debugfs_dev = NULL; + + irq_ptr->debugfs_perf = debugfs_create_file("statistics", + S_IFREG | S_IRUGO | S_IWUSR, + irq_ptr->debugfs_dev, irq_ptr, + &debugfs_perf_fops); + if (IS_ERR(irq_ptr->debugfs_perf)) + irq_ptr->debugfs_perf = NULL; + for_each_input_queue(irq_ptr, q, i) setup_debugfs_entry(q, cdev); for_each_output_queue(irq_ptr, q, i) @@ -171,6 +268,7 @@ void qdio_shutdown_debug_entries(struct qdio_irq *irq_ptr, struct ccw_device *cd debugfs_remove(q->debugfs_q); for_each_output_queue(irq_ptr, q, i) debugfs_remove(q->debugfs_q); + debugfs_remove(irq_ptr->debugfs_perf); debugfs_remove(irq_ptr->debugfs_dev); } diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index b2275c5000e7..999fe80c4051 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -22,7 +22,6 @@ #include "device.h" #include "qdio.h" #include "qdio_debug.h" -#include "qdio_perf.h" MODULE_AUTHOR("Utz Bacher ,"\ "Jan Glauber "); @@ -126,7 +125,7 @@ static int qdio_do_eqbs(struct qdio_q *q, unsigned char *state, int rc; BUG_ON(!q->irq_ptr->sch_token); - qdio_perf_stat_inc(&perf_stats.debug_eqbs_all); + qperf_inc(q, eqbs); if (!q->is_input_q) nr += q->irq_ptr->nr_input_qs; @@ -139,7 +138,7 @@ again: * buffers later. */ if ((ccq == 96) && (count != tmp_count)) { - qdio_perf_stat_inc(&perf_stats.debug_eqbs_incomplete); + qperf_inc(q, eqbs_partial); return (count - tmp_count); } @@ -182,7 +181,7 @@ static int qdio_do_sqbs(struct qdio_q *q, unsigned char state, int start, return 0; BUG_ON(!q->irq_ptr->sch_token); - qdio_perf_stat_inc(&perf_stats.debug_sqbs_all); + qperf_inc(q, sqbs); if (!q->is_input_q) nr += q->irq_ptr->nr_input_qs; @@ -191,7 +190,7 @@ again: rc = qdio_check_ccq(q, ccq); if (rc == 1) { DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "SQBS again:%2d", ccq); - qdio_perf_stat_inc(&perf_stats.debug_sqbs_incomplete); + qperf_inc(q, sqbs_partial); goto again; } if (rc < 0) { @@ -285,7 +284,7 @@ static inline int qdio_siga_sync(struct qdio_q *q, unsigned int output, return 0; DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-s:%1d", q->nr); - qdio_perf_stat_inc(&perf_stats.siga_sync); + qperf_inc(q, siga_sync); cc = do_siga_sync(q->irq_ptr->schid, output, input); if (cc) @@ -350,7 +349,7 @@ static inline int qdio_siga_input(struct qdio_q *q) int cc; DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-r:%1d", q->nr); - qdio_perf_stat_inc(&perf_stats.siga_in); + qperf_inc(q, siga_read); cc = do_siga_input(q->irq_ptr->schid, q->mask); if (cc) @@ -382,7 +381,7 @@ static inline void qdio_stop_polling(struct qdio_q *q) return; q->u.in.polling = 0; - qdio_perf_stat_inc(&perf_stats.debug_stop_polling); + qperf_inc(q, stop_polling); /* show the card that we are not polling anymore */ if (is_qebsm(q)) { @@ -400,7 +399,7 @@ static void announce_buffer_error(struct qdio_q *q, int count) /* special handling for no target buffer empty */ if ((!q->is_input_q && (q->sbal[q->first_to_check]->element[15].flags & 0xff) == 0x10)) { - qdio_perf_stat_inc(&perf_stats.outbound_target_full); + qperf_inc(q, target_full); DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "OUTFULL FTC:%02x", q->first_to_check); return; @@ -487,7 +486,7 @@ static int get_inbound_buffer_frontier(struct qdio_q *q) inbound_primed(q, count); q->first_to_check = add_buf(q->first_to_check, count); if (atomic_sub(count, &q->nr_buf_used) == 0) - qdio_perf_stat_inc(&perf_stats.inbound_queue_full); + qperf_inc(q, inbound_queue_full); break; case SLSB_P_INPUT_ERROR: announce_buffer_error(q, count); @@ -567,9 +566,10 @@ static void qdio_kick_handler(struct qdio_q *q) count = sub_buf(end, start); if (q->is_input_q) { - qdio_perf_stat_inc(&perf_stats.inbound_handler); + qperf_inc(q, inbound_handler); DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "kih s:%02x c:%02x", start, count); } else + qperf_inc(q, outbound_handler); DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "koh: s:%02x c:%02x", start, count); @@ -583,24 +583,28 @@ static void qdio_kick_handler(struct qdio_q *q) static void __qdio_inbound_processing(struct qdio_q *q) { - qdio_perf_stat_inc(&perf_stats.tasklet_inbound); + qperf_inc(q, tasklet_inbound); again: if (!qdio_inbound_q_moved(q)) return; qdio_kick_handler(q); - if (!qdio_inbound_q_done(q)) + if (!qdio_inbound_q_done(q)) { /* means poll time is not yet over */ + qperf_inc(q, tasklet_inbound_resched); goto again; + } qdio_stop_polling(q); /* * We need to check again to not lose initiative after * resetting the ACK state. */ - if (!qdio_inbound_q_done(q)) + if (!qdio_inbound_q_done(q)) { + qperf_inc(q, tasklet_inbound_resched2); goto again; + } } void qdio_inbound_processing(unsigned long data) @@ -688,7 +692,7 @@ static int qdio_kick_outbound_q(struct qdio_q *q) return 0; DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-w:%1d", q->nr); - qdio_perf_stat_inc(&perf_stats.siga_out); + qperf_inc(q, siga_write); cc = qdio_siga_output(q, &busy_bit); switch (cc) { @@ -711,7 +715,7 @@ static int qdio_kick_outbound_q(struct qdio_q *q) static void __qdio_outbound_processing(struct qdio_q *q) { - qdio_perf_stat_inc(&perf_stats.tasklet_outbound); + qperf_inc(q, tasklet_outbound); BUG_ON(atomic_read(&q->nr_buf_used) < 0); if (qdio_outbound_q_moved(q)) @@ -739,12 +743,9 @@ static void __qdio_outbound_processing(struct qdio_q *q) */ if (qdio_outbound_q_done(q)) del_timer(&q->u.out.timer); - else { - if (!timer_pending(&q->u.out.timer)) { + else + if (!timer_pending(&q->u.out.timer)) mod_timer(&q->u.out.timer, jiffies + 10 * HZ); - qdio_perf_stat_inc(&perf_stats.debug_tl_out_timer); - } - } return; sched: @@ -784,7 +785,7 @@ static inline void qdio_check_outbound_after_thinint(struct qdio_q *q) static void __tiqdio_inbound_processing(struct qdio_q *q) { - qdio_perf_stat_inc(&perf_stats.thinint_inbound); + qperf_inc(q, tasklet_inbound); qdio_sync_after_thinint(q); /* @@ -799,7 +800,7 @@ static void __tiqdio_inbound_processing(struct qdio_q *q) qdio_kick_handler(q); if (!qdio_inbound_q_done(q)) { - qdio_perf_stat_inc(&perf_stats.thinint_inbound_loop); + qperf_inc(q, tasklet_inbound_resched); if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED)) { tasklet_schedule(&q->tasklet); return; @@ -812,7 +813,7 @@ static void __tiqdio_inbound_processing(struct qdio_q *q) * resetting the ACK state. */ if (!qdio_inbound_q_done(q)) { - qdio_perf_stat_inc(&perf_stats.thinint_inbound_loop2); + qperf_inc(q, tasklet_inbound_resched2); if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED)) tasklet_schedule(&q->tasklet); } @@ -851,8 +852,6 @@ static void qdio_int_handler_pci(struct qdio_irq *irq_ptr) if (unlikely(irq_ptr->state == QDIO_IRQ_STATE_STOPPED)) return; - qdio_perf_stat_inc(&perf_stats.pci_int); - for_each_input_queue(irq_ptr, q, i) tasklet_schedule(&q->tasklet); @@ -923,8 +922,6 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, struct qdio_irq *irq_ptr = cdev->private->qdio_data; int cstat, dstat; - qdio_perf_stat_inc(&perf_stats.qdio_int); - if (!intparm || !irq_ptr) { DBF_ERROR("qint:%4x", cdev->private->schid.sch_no); return; @@ -1383,6 +1380,8 @@ static int handle_inbound(struct qdio_q *q, unsigned int callflags, { int used, diff; + qperf_inc(q, inbound_call); + if (!q->u.in.polling) goto set; @@ -1438,14 +1437,16 @@ static int handle_outbound(struct qdio_q *q, unsigned int callflags, unsigned char state; int used, rc = 0; - qdio_perf_stat_inc(&perf_stats.outbound_handler); + qperf_inc(q, outbound_call); count = set_buf_states(q, bufnr, SLSB_CU_OUTPUT_PRIMED, count); used = atomic_add_return(count, &q->nr_buf_used); BUG_ON(used > QDIO_MAX_BUFFERS_PER_Q); - if (callflags & QDIO_FLAG_PCI_OUT) + if (callflags & QDIO_FLAG_PCI_OUT) { q->u.out.pci_out_enabled = 1; + qperf_inc(q, pci_request_int); + } else q->u.out.pci_out_enabled = 0; @@ -1484,7 +1485,7 @@ static int handle_outbound(struct qdio_q *q, unsigned int callflags, if (state != SLSB_CU_OUTPUT_PRIMED) rc = qdio_kick_outbound_q(q); else - qdio_perf_stat_inc(&perf_stats.fast_requeue); + qperf_inc(q, fast_requeue); out: tasklet_schedule(&q->tasklet); @@ -1540,16 +1541,11 @@ static int __init init_QDIO(void) rc = qdio_debug_init(); if (rc) goto out_ti; - rc = qdio_setup_perf_stats(); - if (rc) - goto out_debug; rc = tiqdio_register_thinints(); if (rc) - goto out_perf; + goto out_debug; return 0; -out_perf: - qdio_remove_perf_stats(); out_debug: qdio_debug_exit(); out_ti: @@ -1563,7 +1559,6 @@ static void __exit exit_QDIO(void) { tiqdio_unregister_thinints(); tiqdio_free_memory(); - qdio_remove_perf_stats(); qdio_debug_exit(); qdio_setup_exit(); } diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c deleted file mode 100644 index 54f7c325a3e6..000000000000 --- a/drivers/s390/cio/qdio_perf.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * drivers/s390/cio/qdio_perf.c - * - * Copyright IBM Corp. 2008 - * - * Author: Jan Glauber (jang@linux.vnet.ibm.com) - */ -#include -#include -#include -#include - -#include "cio.h" -#include "css.h" -#include "device.h" -#include "ioasm.h" -#include "chsc.h" -#include "qdio_debug.h" -#include "qdio_perf.h" - -int qdio_performance_stats; -struct qdio_perf_stats perf_stats; - -#ifdef CONFIG_PROC_FS -static struct proc_dir_entry *qdio_perf_pde; -#endif - -/* - * procfs functions - */ -static int qdio_perf_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "Number of qdio interrupts\t\t\t: %li\n", - (long)atomic_long_read(&perf_stats.qdio_int)); - seq_printf(m, "Number of PCI interrupts\t\t\t: %li\n", - (long)atomic_long_read(&perf_stats.pci_int)); - seq_printf(m, "Number of adapter interrupts\t\t\t: %li\n", - (long)atomic_long_read(&perf_stats.thin_int)); - seq_printf(m, "\n"); - seq_printf(m, "Inbound tasklet runs\t\t\t\t: %li\n", - (long)atomic_long_read(&perf_stats.tasklet_inbound)); - seq_printf(m, "Outbound tasklet runs\t\t\t\t: %li\n", - (long)atomic_long_read(&perf_stats.tasklet_outbound)); - seq_printf(m, "Adapter interrupt tasklet runs/loops\t\t: %li/%li\n", - (long)atomic_long_read(&perf_stats.tasklet_thinint), - (long)atomic_long_read(&perf_stats.tasklet_thinint_loop)); - seq_printf(m, "Adapter interrupt inbound tasklet runs/loops\t: %li/%li\n", - (long)atomic_long_read(&perf_stats.thinint_inbound), - (long)atomic_long_read(&perf_stats.thinint_inbound_loop)); - seq_printf(m, "\n"); - seq_printf(m, "Number of SIGA In issued\t\t\t: %li\n", - (long)atomic_long_read(&perf_stats.siga_in)); - seq_printf(m, "Number of SIGA Out issued\t\t\t: %li\n", - (long)atomic_long_read(&perf_stats.siga_out)); - seq_printf(m, "Number of SIGA Sync issued\t\t\t: %li\n", - (long)atomic_long_read(&perf_stats.siga_sync)); - seq_printf(m, "\n"); - seq_printf(m, "Number of inbound transfers\t\t\t: %li\n", - (long)atomic_long_read(&perf_stats.inbound_handler)); - seq_printf(m, "Number of outbound transfers\t\t\t: %li\n", - (long)atomic_long_read(&perf_stats.outbound_handler)); - seq_printf(m, "\n"); - seq_printf(m, "Number of fast requeues (outg. SBAL w/o SIGA)\t: %li\n", - (long)atomic_long_read(&perf_stats.fast_requeue)); - seq_printf(m, "Number of outbound target full condition\t: %li\n", - (long)atomic_long_read(&perf_stats.outbound_target_full)); - seq_printf(m, "Number of inbound queue full condition\t\t: %li\n", - (long)atomic_long_read(&perf_stats.inbound_queue_full)); - seq_printf(m, "Number of outbound tasklet mod_timer calls\t: %li\n", - (long)atomic_long_read(&perf_stats.debug_tl_out_timer)); - seq_printf(m, "Number of stop polling calls\t\t\t: %li\n", - (long)atomic_long_read(&perf_stats.debug_stop_polling)); - seq_printf(m, "AI inbound tasklet loops after stop polling\t: %li\n", - (long)atomic_long_read(&perf_stats.thinint_inbound_loop2)); - seq_printf(m, "QEBSM EQBS total/incomplete\t\t\t: %li/%li\n", - (long)atomic_long_read(&perf_stats.debug_eqbs_all), - (long)atomic_long_read(&perf_stats.debug_eqbs_incomplete)); - seq_printf(m, "QEBSM SQBS total/incomplete\t\t\t: %li/%li\n", - (long)atomic_long_read(&perf_stats.debug_sqbs_all), - (long)atomic_long_read(&perf_stats.debug_sqbs_incomplete)); - seq_printf(m, "\n"); - return 0; -} -static int qdio_perf_seq_open(struct inode *inode, struct file *filp) -{ - return single_open(filp, qdio_perf_proc_show, NULL); -} - -static const struct file_operations qdio_perf_proc_fops = { - .owner = THIS_MODULE, - .open = qdio_perf_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/* - * sysfs functions - */ -static ssize_t qdio_perf_stats_show(struct bus_type *bus, char *buf) -{ - return sprintf(buf, "%i\n", qdio_performance_stats ? 1 : 0); -} - -static ssize_t qdio_perf_stats_store(struct bus_type *bus, - const char *buf, size_t count) -{ - unsigned long i; - - if (strict_strtoul(buf, 16, &i) != 0) - return -EINVAL; - if ((i != 0) && (i != 1)) - return -EINVAL; - if (i == qdio_performance_stats) - return count; - - qdio_performance_stats = i; - /* reset performance statistics */ - if (i == 0) - memset(&perf_stats, 0, sizeof(struct qdio_perf_stats)); - return count; -} - -static BUS_ATTR(qdio_performance_stats, 0644, qdio_perf_stats_show, - qdio_perf_stats_store); - -int __init qdio_setup_perf_stats(void) -{ - int rc; - - rc = bus_create_file(&ccw_bus_type, &bus_attr_qdio_performance_stats); - if (rc) - return rc; - -#ifdef CONFIG_PROC_FS - memset(&perf_stats, 0, sizeof(struct qdio_perf_stats)); - qdio_perf_pde = proc_create("qdio_perf", S_IFREG | S_IRUGO, - NULL, &qdio_perf_proc_fops); -#endif - return 0; -} - -void qdio_remove_perf_stats(void) -{ -#ifdef CONFIG_PROC_FS - remove_proc_entry("qdio_perf", NULL); -#endif - bus_remove_file(&ccw_bus_type, &bus_attr_qdio_performance_stats); -} diff --git a/drivers/s390/cio/qdio_perf.h b/drivers/s390/cio/qdio_perf.h deleted file mode 100644 index 12454231dc8b..000000000000 --- a/drivers/s390/cio/qdio_perf.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * drivers/s390/cio/qdio_perf.h - * - * Copyright IBM Corp. 2008 - * - * Author: Jan Glauber (jang@linux.vnet.ibm.com) - */ -#ifndef QDIO_PERF_H -#define QDIO_PERF_H - -#include -#include - -struct qdio_perf_stats { - /* interrupt handler calls */ - atomic_long_t qdio_int; - atomic_long_t pci_int; - atomic_long_t thin_int; - - /* tasklet runs */ - atomic_long_t tasklet_inbound; - atomic_long_t tasklet_outbound; - atomic_long_t tasklet_thinint; - atomic_long_t tasklet_thinint_loop; - atomic_long_t thinint_inbound; - atomic_long_t thinint_inbound_loop; - atomic_long_t thinint_inbound_loop2; - - /* signal adapter calls */ - atomic_long_t siga_out; - atomic_long_t siga_in; - atomic_long_t siga_sync; - - /* misc */ - atomic_long_t inbound_handler; - atomic_long_t outbound_handler; - atomic_long_t fast_requeue; - atomic_long_t outbound_target_full; - atomic_long_t inbound_queue_full; - - /* for debugging */ - atomic_long_t debug_tl_out_timer; - atomic_long_t debug_stop_polling; - atomic_long_t debug_eqbs_all; - atomic_long_t debug_eqbs_incomplete; - atomic_long_t debug_sqbs_all; - atomic_long_t debug_sqbs_incomplete; -}; - -extern struct qdio_perf_stats perf_stats; -extern int qdio_performance_stats; - -static inline void qdio_perf_stat_inc(atomic_long_t *count) -{ - if (qdio_performance_stats) - atomic_long_inc(count); -} - -int qdio_setup_perf_stats(void); -void qdio_remove_perf_stats(void); - -#endif diff --git a/drivers/s390/cio/qdio_thinint.c b/drivers/s390/cio/qdio_thinint.c index 981a77ea7ee2..091d904d3182 100644 --- a/drivers/s390/cio/qdio_thinint.c +++ b/drivers/s390/cio/qdio_thinint.c @@ -1,9 +1,7 @@ /* * linux/drivers/s390/cio/thinint_qdio.c * - * thin interrupt support for qdio - * - * Copyright 2000-2008 IBM Corp. + * Copyright 2000,2009 IBM Corp. * Author(s): Utz Bacher * Cornelia Huck * Jan Glauber @@ -19,7 +17,6 @@ #include "ioasm.h" #include "qdio.h" #include "qdio_debug.h" -#include "qdio_perf.h" /* * Restriction: only 63 iqdio subchannels would have its own indicator, @@ -132,8 +129,6 @@ static void tiqdio_thinint_handler(void *ind, void *drv_data) { struct qdio_q *q; - qdio_perf_stat_inc(&perf_stats.thin_int); - /* * SVS only when needed: issue SVS to benefit from iqdio interrupt * avoidance (SVS clears adapter interrupt suppression overwrite) @@ -154,6 +149,7 @@ static void tiqdio_thinint_handler(void *ind, void *drv_data) list_for_each_entry_rcu(q, &tiq_list, entry) /* only process queues from changed sets */ if (*q->irq_ptr->dsci) { + qperf_inc(q, adapter_int); /* only clear it if the indicator is non-shared */ if (!shared_ind(q->irq_ptr)) From f5cae7b0fb6927981a839443dfa6d73c30415cba Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Mon, 4 Jan 2010 09:05:43 +0100 Subject: [PATCH 0333/1626] [S390] Have param.h simply include . Since the files have identical content, might as well simplify. Signed-off-by: Robert P. J. Day Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/param.h | 28 ++-------------------------- 1 file changed, 2 insertions(+), 26 deletions(-) diff --git a/arch/s390/include/asm/param.h b/arch/s390/include/asm/param.h index 34aaa4603347..c616821bf2ac 100644 --- a/arch/s390/include/asm/param.h +++ b/arch/s390/include/asm/param.h @@ -1,30 +1,6 @@ -/* - * include/asm-s390/param.h - * - * S390 version - * - * Derived from "include/asm-i386/param.h" - */ - #ifndef _ASMS390_PARAM_H #define _ASMS390_PARAM_H -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#endif +#include -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif +#endif /* _ASMS390_PARAM_H */ From cc4707b31198d27baae650db1721a2f05701db37 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 4 Jan 2010 09:05:44 +0100 Subject: [PATCH 0334/1626] [S390] Update default configuration. Signed-off-by: Martin Schwidefsky --- arch/s390/defconfig | 86 +++++++++++++++++++++++++++++++++++++++------ 1 file changed, 75 insertions(+), 11 deletions(-) diff --git a/arch/s390/defconfig b/arch/s390/defconfig index f4e53c6708dc..b416aa11b91e 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Tue Sep 22 17:43:13 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 09:03:07 2010 # CONFIG_SCHED_MC=y CONFIG_MMU=y @@ -51,6 +51,7 @@ CONFIG_AUDIT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=64 # CONFIG_RCU_FANOUT_EXACT is not set @@ -113,7 +114,6 @@ CONFIG_HAVE_PERF_EVENTS=y # CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -149,21 +149,78 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set +# CONFIG_BLK_CGROUP is not set CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set +# CONFIG_CFQ_GROUP_IOSCHED is not set CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y +CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y +CONFIG_ARCH_INLINE_SPIN_LOCK=y +CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y +CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y +CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y +CONFIG_ARCH_INLINE_READ_TRYLOCK=y +CONFIG_ARCH_INLINE_READ_LOCK=y +CONFIG_ARCH_INLINE_READ_LOCK_BH=y +CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y +CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y +CONFIG_ARCH_INLINE_READ_UNLOCK=y +CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y +CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y +CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y +CONFIG_ARCH_INLINE_WRITE_TRYLOCK=y +CONFIG_ARCH_INLINE_WRITE_LOCK=y +CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y +CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y +CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # @@ -227,14 +284,13 @@ CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # @@ -339,6 +395,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -504,6 +561,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_OSD is not set CONFIG_BLK_DEV_RAM=y @@ -710,7 +771,6 @@ CONFIG_S390_VMUR=m # CONFIG_PPS is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # CONFIG_REGULATOR is not set # CONFIG_MEMSTICK is not set @@ -864,6 +924,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -931,7 +992,6 @@ CONFIG_BRANCH_PROFILE_NONE=y CONFIG_SAMPLES=y # CONFIG_SAMPLE_KOBJECT is not set # CONFIG_SAMPLE_KPROBES is not set -# CONFIG_KMEMCHECK is not set # # Security options @@ -939,7 +999,11 @@ CONFIG_SAMPLES=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # From 17740d89785aeb4143770923d67c293849414710 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 28 Aug 2009 10:47:16 +0200 Subject: [PATCH 0335/1626] SECURITY: selinux, fix update_rlimit_cpu parameter Don't pass current RLIMIT_RTTIME to update_rlimit_cpu() in selinux_bprm_committing_creds, since update_rlimit_cpu expects RLIMIT_CPU limit. Use proper rlim[RLIMIT_CPU].rlim_cur instead to fix that. Signed-off-by: Jiri Slaby Acked-by: James Morris Cc: Stephen Smalley Cc: Eric Paris Cc: David Howells --- security/selinux/hooks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 7a374c2eb043..9a2ee845e9d4 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2365,7 +2365,7 @@ static void selinux_bprm_committing_creds(struct linux_binprm *bprm) initrlim = init_task.signal->rlim + i; rlim->rlim_cur = min(rlim->rlim_max, initrlim->rlim_cur); } - update_rlimit_cpu(rlim->rlim_cur); + update_rlimit_cpu(current->signal->rlim[RLIMIT_CPU].rlim_cur); } } From 96d07d211739fd2450ac54e81d00fa40fcd4b1bd Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 20 Nov 2009 14:16:33 +0100 Subject: [PATCH 0336/1626] resource: move kernel function inside __KERNEL__ It is an internal function. Move it inside __KERNEL__ ifdef, along with task_struct declaration. Then we get: --- /usr/include/linux/resource.h 2009-09-14 15:09:29.000000000 +0200 +++ usr/include/linux/resource.h 2010-01-04 11:30:54.000000000 +0100 @@ -3,8 +3,6 @@ #include -struct task_struct; - /* * Resource control/accounting header file for linux */ @@ -70,6 +68,5 @@ */ #include -int getrusage(struct task_struct *p, int who, struct rusage *ru); #endif *********** include/linux/Kbuild is untouched, since unifdef is run even on headers-y nowadays. Signed-off-by: Jiri Slaby --- include/linux/resource.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/include/linux/resource.h b/include/linux/resource.h index 40fc7e626082..f1e914eefeab 100644 --- a/include/linux/resource.h +++ b/include/linux/resource.h @@ -3,8 +3,6 @@ #include -struct task_struct; - /* * Resource control/accounting header file for linux */ @@ -70,6 +68,12 @@ struct rlimit { */ #include +#ifdef __KERNEL__ + +struct task_struct; + int getrusage(struct task_struct *p, int who, struct rusage __user *ru); +#endif /* __KERNEL__ */ + #endif From 3e10e716abf3c71bdb5d86b8f507f9e72236c9cd Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 19 Nov 2009 17:16:37 +0100 Subject: [PATCH 0337/1626] resource: add helpers for fetching rlimits We want to be sure that compiler fetches the limit variable only once, so add helpers for fetching current and maximal resource limits which do that. Add them to sched.h (instead of resource.h) due to circular dependency sched.h->resource.h->task_struct Alternative would be to create a separate res_access.h or similar. Signed-off-by: Jiri Slaby Cc: James Morris Cc: Heiko Carstens Cc: Andrew Morton Cc: Ingo Molnar --- include/linux/sched.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/include/linux/sched.h b/include/linux/sched.h index f2f842db03ce..8d4991be9d53 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2601,6 +2601,28 @@ static inline void mm_init_owner(struct mm_struct *mm, struct task_struct *p) } #endif /* CONFIG_MM_OWNER */ +static inline unsigned long task_rlimit(const struct task_struct *tsk, + unsigned int limit) +{ + return ACCESS_ONCE(tsk->signal->rlim[limit].rlim_cur); +} + +static inline unsigned long task_rlimit_max(const struct task_struct *tsk, + unsigned int limit) +{ + return ACCESS_ONCE(tsk->signal->rlim[limit].rlim_max); +} + +static inline unsigned long rlimit(unsigned int limit) +{ + return task_rlimit(current, limit); +} + +static inline unsigned long rlimit_max(unsigned int limit) +{ + return task_rlimit_max(current, limit); +} + #endif /* __KERNEL__ */ #endif From 2243b649aa9e5669bea5413c5b520f333f96be07 Mon Sep 17 00:00:00 2001 From: Alan Carvalho de Assis Date: Fri, 4 Dec 2009 15:44:06 -0200 Subject: [PATCH 0338/1626] mx27: mxt_td60: Remove not used UART pins Signed-off-by: Alan Carvalho de Assis Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/mxt_td60.c | 24 ------------------------ 1 file changed, 24 deletions(-) diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mxt_td60.c index 03dbbdc98955..8bcc1a5b8829 100644 --- a/arch/arm/mach-mx2/mxt_td60.c +++ b/arch/arm/mach-mx2/mxt_td60.c @@ -58,21 +58,6 @@ static unsigned int mxt_td60_pins[] __initdata = { PE9_PF_UART3_RXD, PE10_PF_UART3_CTS, PE11_PF_UART3_RTS, - /* UART3 */ - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD, - /* UART4 */ - PB18_AF_UART5_TXD, - PB19_AF_UART5_RXD, - PB20_AF_UART5_CTS, - PB21_AF_UART5_RTS, - /* UART5 */ - PB10_AF_UART6_TXD, - PB12_AF_UART6_CTS, - PB11_AF_UART6_RXD, - PB13_AF_UART6_RTS, /* FEC */ PD0_AIN_FEC_TXD0, PD1_AIN_FEC_TXD1, @@ -261,12 +246,6 @@ static struct imxuart_platform_data uart_pdata[] = { .flags = IMXUART_HAVE_RTSCTS, }, { .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, }, }; @@ -278,9 +257,6 @@ static void __init mxt_td60_board_init(void) mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); - mxc_register_device(&mxc_uart_device3, &uart_pdata[3]); - mxc_register_device(&mxc_uart_device4, &uart_pdata[4]); - mxc_register_device(&mxc_uart_device5, &uart_pdata[5]); mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info); i2c_register_board_info(0, mxt_td60_i2c_devices, From 9d00278d481b148fa99222553bb2339bc5f65036 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 11 Dec 2009 14:29:06 +0100 Subject: [PATCH 0339/1626] mx3: add support for the mt9v022 camera sensor to pcm037 platform Signed-off-by: Guennadi Liakhovetski Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/pcm037.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index 6cbaabedf386..5be396917c99 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -322,16 +322,25 @@ static int pcm037_camera_power(struct device *dev, int on) return 0; } -static struct i2c_board_info pcm037_i2c_2_devices[] = { +static struct i2c_board_info pcm037_i2c_camera[] = { { I2C_BOARD_INFO("mt9t031", 0x5d), + }, { + I2C_BOARD_INFO("mt9v022", 0x48), }, }; -static struct soc_camera_link iclink = { +static struct soc_camera_link iclink_mt9v022 = { + .bus_id = 0, /* Must match with the camera ID */ + .board_info = &pcm037_i2c_camera[1], + .i2c_adapter_id = 2, + .module_name = "mt9v022", +}; + +static struct soc_camera_link iclink_mt9t031 = { .bus_id = 0, /* Must match with the camera ID */ .power = pcm037_camera_power, - .board_info = &pcm037_i2c_2_devices[0], + .board_info = &pcm037_i2c_camera[0], .i2c_adapter_id = 2, .module_name = "mt9t031", }; @@ -345,11 +354,19 @@ static struct i2c_board_info pcm037_i2c_devices[] = { } }; -static struct platform_device pcm037_camera = { +static struct platform_device pcm037_mt9t031 = { .name = "soc-camera-pdrv", .id = 0, .dev = { - .platform_data = &iclink, + .platform_data = &iclink_mt9t031, + }, +}; + +static struct platform_device pcm037_mt9v022 = { + .name = "soc-camera-pdrv", + .id = 1, + .dev = { + .platform_data = &iclink_mt9v022, }, }; @@ -449,7 +466,8 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size) static struct platform_device *devices[] __initdata = { &pcm037_flash, &pcm037_sram_device, - &pcm037_camera, + &pcm037_mt9t031, + &pcm037_mt9v022, }; static struct ipu_platform_data mx3_ipu_data = { @@ -599,7 +617,7 @@ static void __init mxc_board_init(void) if (!ret) gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1); else - iclink.power = NULL; + iclink_mt9t031.power = NULL; if (!pcm037_camera_alloc_dma(4 * 1024 * 1024)) mxc_register_device(&mx3_camera, &camera_pdata); From 4c21186bd8b1ecf46a7cc20d8ad26476afe14f8c Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Fri, 4 Dec 2009 16:50:29 +0100 Subject: [PATCH 0340/1626] mx31moboard: fix usbh device names Signed-off-by: Valentin Longchamp Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mx31moboard-devboard.c | 2 +- arch/arm/mach-mx3/mx31moboard-marxbot.c | 2 +- arch/arm/mach-mx3/mx31moboard.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 8fc624f141cb..438428eaf769 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -179,7 +179,7 @@ static int __init devboard_usbh1_init(void) usbh1_pdata.otg = otg; - return mxc_register_device(&mx31_usbh1, &usbh1_pdata); + return mxc_register_device(&mxc_usbh1, &usbh1_pdata); } /* diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 85184a35e674..1f44b9ccbb0f 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -294,7 +294,7 @@ static int __init marxbot_usbh1_init(void) usbh1_pdata.otg = otg; - return mxc_register_device(&mx31_usbh1, &usbh1_pdata); + return mxc_register_device(&mxc_usbh1, &usbh1_pdata); } /* diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index b70529145936..839f09aef8b2 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -392,7 +392,7 @@ static int __init moboard_usbh2_init(void) usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); - return mxc_register_device(&mx31_usbh2, &usbh2_pdata); + return mxc_register_device(&mxc_usbh2, &usbh2_pdata); } From dda71f1612bd6644714ab5c801d2f6d390b5318f Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 14 Dec 2009 12:19:39 +0200 Subject: [PATCH 0341/1626] mx25: s/NO_PAD_CTL/NO_PAD_CTRL/ NO_PAD_CTL is not defined anywhere. Signed-off-by: Baruch Siach Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/iomux-mx25.h | 58 ++++++++++----------- 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index 810c47f56e77..9af494f0ab3d 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -58,19 +58,19 @@ #define MX25_PAD_A18__A18 IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A18__GPIO_2_4 IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL) +#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL) #define MX25_PAD_A19__A19 IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL) +#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL) #define MX25_PAD_A19__GPIO_2_5 IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A20__A20 IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A20__GPIO_2_6 IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL) +#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL) #define MX25_PAD_A21__A21 IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A21__GPIO_2_7 IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL) +#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL) #define MX25_PAD_A22__A22 IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A22__GPIO_2_8 IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL) @@ -80,11 +80,11 @@ #define MX25_PAD_A24__A24 IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A24__GPIO_2_10 IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL) +#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL) #define MX25_PAD_A25__A25 IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A25__GPIO_2_11 IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL) +#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL) #define MX25_PAD_EB0__EB0 IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_EB0__AUD4_TXD IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL) @@ -112,7 +112,7 @@ #define MX25_PAD_CS5__UART5_RTS IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL) #define MX25_PAD_CS5__GPIO_3_21 IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_NF_CE0__GPIO_3_22 IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_ECB__ECB IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL) @@ -229,28 +229,28 @@ #define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL) +#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL) +#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL) #define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL) +#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL) #define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL) +#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL) #define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL) +#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL) #define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL) +#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL) +#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL) +#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL) #define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_HSYNC__GPIO_1_22 IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL) @@ -265,7 +265,7 @@ #define MX25_PAD_OE_ACD__GPIO_1_25 IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CONTRAST__CONTRAST IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL) +#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL) #define MX25_PAD_PWM__PWM IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_PWM__GPIO_1_26 IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL) @@ -354,19 +354,19 @@ #define MX25_PAD_UART2_TXD__GPIO_4_27 IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL) +#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL) #define MX25_PAD_UART2_RTS__GPIO_4_28 IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL) +#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL) #define MX25_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_UART2_CTS__GPIO_4_29 IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_CMD__GPIO_2_23 IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_CLK__GPIO_2_24 IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) @@ -377,11 +377,11 @@ #define MX25_PAD_SD1_DATA1__GPIO_2_26 IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA2__GPIO_2_27 IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE) @@ -410,7 +410,7 @@ #define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE) #define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_FEC_MDC__AUD4_TXD IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL) #define MX25_PAD_FEC_MDC__GPIO_3_5 IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL) @@ -418,23 +418,23 @@ #define MX25_PAD_FEC_MDIO__AUD4_RXD IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL) #define MX25_PAD_FEC_MDIO__GPIO_3_6 IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_FEC_TDATA0__GPIO_3_7 IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_FEC_TDATA1__AUD4_TXFS IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL) #define MX25_PAD_FEC_TDATA1__GPIO_3_8 IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_FEC_TX_EN__GPIO_3_9 IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL) +#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL) #define MX25_PAD_FEC_RDATA0__GPIO_3_10 IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL) +#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL) #define MX25_PAD_FEC_RDATA1__GPIO_3_11 IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL) +#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL) #define MX25_PAD_FEC_RX_DV__CAN2_RX IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP) #define MX25_PAD_FEC_RX_DV__GPIO_3_12 IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL) From a759544ff95c14dac93759e02a84e233da0dc25a Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 21 Dec 2009 13:44:31 +0200 Subject: [PATCH 0342/1626] mx25: add support for FEC on i.MX25 Signed-off-by: Sascha Hauer --- arch/arm/mach-mx25/clock.c | 2 ++ arch/arm/mach-mx25/devices.c | 19 +++++++++++++++++++ arch/arm/mach-mx25/devices.h | 1 + arch/arm/plat-mxc/include/mach/mx25.h | 4 ++++ 4 files changed, 26 insertions(+) diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index ef26951a5275..6e838b857712 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -173,6 +173,7 @@ DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL); DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL); DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL); DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL); +DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -204,6 +205,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk) + _REGISTER_CLOCK("fec.0", NULL, fec_clk) }; int __init mx25_clocks_init(unsigned long fref) diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index 63511de3a559..9fdeea1c083b 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -419,3 +419,22 @@ int __init mxc_register_gpios(void) return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); } +static struct resource mx25_fec_resources[] = { + { + .start = MX25_FEC_BASE_ADDR, + .end = MX25_FEC_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + { + .start = MX25_INT_FEC, + .end = MX25_INT_FEC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mx25_fec_device = { + .name = "fec", + .id = 0, + .num_resources = ARRAY_SIZE(mx25_fec_resources), + .resource = mx25_fec_resources, +}; diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h index fe6bf88ad1dd..fe5420fcd11f 100644 --- a/arch/arm/mach-mx25/devices.h +++ b/arch/arm/mach-mx25/devices.h @@ -17,3 +17,4 @@ extern struct platform_device mxc_keypad_device; extern struct platform_device mxc_i2c_device0; extern struct platform_device mxc_i2c_device1; extern struct platform_device mxc_i2c_device2; +extern struct platform_device mx25_fec_device; diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 91e738144804..854e2dc58481 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -41,4 +41,8 @@ #define UART1_BASE_ADDR 0x43f90000 #define UART2_BASE_ADDR 0x43f94000 +#define MX25_FEC_BASE_ADDR 0x50038000 + +#define MX25_INT_FEC 57 + #endif /* __MACH_MX25_H__ */ From e71fbaf7660cefb49459e66a12bbb928a86958c9 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 21 Dec 2009 13:44:32 +0200 Subject: [PATCH 0343/1626] mx25: pdk: add platform code for FEC support Signed-off-by: Sascha Hauer --- arch/arm/mach-mx25/mx25pdk.c | 46 ++++++++++++++++++++++++++++++++++-- 1 file changed, 44 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c index d23ae571c03f..921bc99ea231 100644 --- a/arch/arm/mach-mx25/mx25pdk.c +++ b/arch/arm/mach-mx25/mx25pdk.c @@ -18,10 +18,11 @@ #include #include +#include #include #include #include -#include +#include #include #include @@ -35,16 +36,57 @@ #include #include #include "devices.h" -#include +#include static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; +static struct pad_desc mx25pdk_pads[] = { + MX25_PAD_FEC_MDC__FEC_MDC, + MX25_PAD_FEC_MDIO__FEC_MDIO, + MX25_PAD_FEC_TDATA0__FEC_TDATA0, + MX25_PAD_FEC_TDATA1__FEC_TDATA1, + MX25_PAD_FEC_TX_EN__FEC_TX_EN, + MX25_PAD_FEC_RDATA0__FEC_RDATA0, + MX25_PAD_FEC_RDATA1__FEC_RDATA1, + MX25_PAD_FEC_RX_DV__FEC_RX_DV, + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */ + MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */ +}; + +static struct fec_platform_data mx25_fec_pdata = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +#define FEC_ENABLE_GPIO 35 +#define FEC_RESET_B_GPIO 104 + +static void __init mx25pdk_fec_reset(void) +{ + gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable"); + gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset"); + + gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */ + gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */ + udelay(2); + + /* turn on PHY power and lift reset */ + gpio_set_value(FEC_ENABLE_GPIO, 1); + gpio_set_value(FEC_RESET_B_GPIO, 1); +} + static void __init mx25pdk_init(void) { + mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, + ARRAY_SIZE(mx25pdk_pads)); + mxc_register_device(&mxc_uart_device0, &uart_pdata); mxc_register_device(&mxc_usbh2, NULL); + + mx25pdk_fec_reset(); + mxc_register_device(&mx25_fec_device, &mx25_fec_pdata); } static void __init mx25pdk_timer_init(void) From 2d1ee87d8763b38668f6f11bb53abb689a49a43e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 27 Dec 2009 22:27:11 +0100 Subject: [PATCH 0344/1626] drivers/block/drbd: Correct NULL test Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,y; statement S; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // Signed-off-by: Julia Lawall Signed-off-by: Philipp Reisner --- drivers/block/drbd/drbd_receiver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index a6d266ee7e2a..dbd451984e0d 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -3945,7 +3945,7 @@ static int drbd_do_auth(struct drbd_conf *mdev) } right_response = kmalloc(resp_size, GFP_NOIO); - if (response == NULL) { + if (right_response == NULL) { dev_err(DEV, "kmalloc of right_response failed\n"); rv = 0; goto fail; From e94c4c34495e194d778e9ab20044c723280a54e7 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 15 Dec 2009 00:27:42 +0100 Subject: [PATCH 0345/1626] ARM: MX3: make CPU revision number detection work on all boards Commit 52939c03 (ARM: MX3: fix CPU revision number detection) started using the CPU's SREV register for revision number detection. This makes it mandatory to have a valid SPBA0 mapping. Add this to the global map_io code instead of adding multiple copies for each board. Signed-off-by: Wolfgang Denk Cc: Daniel Mack Cc: Sascha Hauer Tested on Qong (EVB-Lite) Tested-by: Wolfgang Denk Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mm.c | 5 +++++ arch/arm/mach-mx3/mx31ads.c | 5 ----- arch/arm/mach-mx3/mx31lite.c | 5 ----- arch/arm/mach-mx3/mx31pdk.c | 5 ----- 4 files changed, 5 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index bedf5b8d976a..6858a4f9806c 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -65,6 +65,11 @@ static struct map_desc mxc_io_desc[] __initdata = { .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), .length = AIPS2_SIZE, .type = MT_DEVICE_NONSHARED + }, { + .virtual = SPBA0_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), + .length = SPBA0_SIZE, + .type = MT_DEVICE_NONSHARED }, }; diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 0497c152be18..3e7bafa2ddbb 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -494,11 +494,6 @@ static void mxc_init_i2c(void) */ static struct map_desc mx31ads_io_desc[] __initdata = { { - .virtual = SPBA0_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), - .length = SPBA0_SIZE, - .type = MT_DEVICE_NONSHARED - }, { .virtual = CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(CS4_BASE_ADDR), .length = CS4_SIZE / 2, diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c index def6b6736594..4697164943d1 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mx31lite.c @@ -212,11 +212,6 @@ static struct platform_device physmap_flash_device = { */ static struct map_desc mx31lite_io_desc[] __initdata = { { - .virtual = SPBA0_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), - .length = SPBA0_SIZE, - .type = MT_DEVICE_NONSHARED - }, { .virtual = CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(CS4_BASE_ADDR), .length = CS4_SIZE, diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c index 0f7a2f06bc2d..18715f1aa7eb 100644 --- a/arch/arm/mach-mx3/mx31pdk.c +++ b/arch/arm/mach-mx3/mx31pdk.c @@ -211,11 +211,6 @@ static int __init mx31pdk_init_expio(void) */ static struct map_desc mx31pdk_io_desc[] __initdata = { { - .virtual = SPBA0_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), - .length = SPBA0_SIZE, - .type = MT_DEVICE_NONSHARED, - }, { .virtual = CS5_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(CS5_BASE_ADDR), .length = CS5_SIZE, From f9ffaa9ca9889f17ef30b82bc0bf954d141280f8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 22 Dec 2009 17:31:05 +0100 Subject: [PATCH 0346/1626] imx/mx3: depend on USB_ULPI for otg_ulpi_create MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit otg_ulpi_create is defined in drivers/usb/otg/ulpi.c which depends on CONFIG_USB_ULPI. So protect its usage by the same symbol. Moreover mxc_ulpi_access_ops needs CONFIG_MXC_ULPI. Signed-off-by: Uwe Kleine-König Cc: Sascha Hauer Cc: Valentin Longchamp Cc: Daniel Mack Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/Kconfig | 3 ++- arch/arm/mach-mx3/mx31lite.c | 4 ++++ arch/arm/mach-mx3/mx31moboard.c | 5 +++++ 3 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index ea8ed109a7c2..28294416b0af 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -49,6 +49,7 @@ config MACH_PCM037_EET config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" select ARCH_MX31 + select MXC_ULPI if USB_ULPI help Include support for MX31 LITEKIT platform. This includes specific configurations for the board and its peripherals. @@ -63,7 +64,7 @@ config MACH_MX31_3DS config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select ARCH_MX31 - select MXC_ULPI + select MXC_ULPI if USB_ULPI help Include support for mx31moboard platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c index 4697164943d1..789b20d1730f 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mx31lite.c @@ -135,6 +135,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = { * USB */ +#if defined(CONFIG_USB_ULPI) #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) @@ -180,6 +181,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = { .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED, }; +#endif /* * NOR flash @@ -256,11 +258,13 @@ static void __init mxc_board_init(void) mxc_register_device(&mxc_spi_device1, &spi1_pdata); spi_register_board_info(&mc13783_spi_dev, 1); +#if defined(CONFIG_USB_ULPI) /* USB */ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); mxc_register_device(&mxc_usbh2, &usbh2_pdata); +#endif /* SMSC9117 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index 839f09aef8b2..cfd605d078ec 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -346,6 +346,8 @@ static struct fsl_usb2_platform_data usb_pdata = { .phy_mode = FSL_USB2_PHY_ULPI, }; +#if defined(CONFIG_USB_ULPI) + #define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6) static int moboard_usbh2_hw_init(struct platform_device *pdev) @@ -394,6 +396,9 @@ static int __init moboard_usbh2_init(void) return mxc_register_device(&mxc_usbh2, &usbh2_pdata); } +#else +static inline int moboard_usbh2_init(void) { return 0; } +#endif static struct gpio_led mx31moboard_leds[] = { From 04bcef2a83f40c6db24222b27a52892cba39dffb Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 4 Jan 2010 16:37:12 +0100 Subject: [PATCH 0347/1626] ipvs: Add boundary check on ioctl arguments The ipvs code has a nifty system for doing the size of ioctl command copies; it defines an array with values into which it indexes the cmd to find the right length. Unfortunately, the ipvs code forgot to check if the cmd was in the range that the array provides, allowing for an index outside of the array, which then gives a "garbage" result into the length, which then gets used for copying into a stack buffer. Fix this by adding sanity checks on these as well as the copy size. [ horms@verge.net.au: adjusted limit to IP_VS_SO_GET_MAX ] Signed-off-by: Arjan van de Ven Acked-by: Julian Anastasov Signed-off-by: Simon Horman Signed-off-by: Patrick McHardy --- net/netfilter/ipvs/ip_vs_ctl.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 6bde12da2fe0..c37ac2d7bec4 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -2077,6 +2077,10 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len) if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (cmd < IP_VS_BASE_CTL || cmd > IP_VS_SO_SET_MAX) + return -EINVAL; + if (len < 0 || len > MAX_ARG_LEN) + return -EINVAL; if (len != set_arglen[SET_CMDID(cmd)]) { pr_err("set_ctl: len %u != %u\n", len, set_arglen[SET_CMDID(cmd)]); @@ -2352,17 +2356,25 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len) { unsigned char arg[128]; int ret = 0; + unsigned int copylen; if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (cmd < IP_VS_BASE_CTL || cmd > IP_VS_SO_GET_MAX) + return -EINVAL; + if (*len < get_arglen[GET_CMDID(cmd)]) { pr_err("get_ctl: len %u < %u\n", *len, get_arglen[GET_CMDID(cmd)]); return -EINVAL; } - if (copy_from_user(arg, user, get_arglen[GET_CMDID(cmd)]) != 0) + copylen = get_arglen[GET_CMDID(cmd)]; + if (copylen > 128) + return -EINVAL; + + if (copy_from_user(arg, user, copylen) != 0) return -EFAULT; if (mutex_lock_interruptible(&__ip_vs_mutex)) From ea708ac9349e1eddbcf983c1d1234dc191c41da8 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Mon, 4 Jan 2010 10:58:28 -0500 Subject: [PATCH 0348/1626] powerpc/44x: Update PowerPC 44x board defconfigs Update the 44x defconfig files for 2.6.33 Signed-off-by: Josh Boyer --- arch/powerpc/configs/44x/arches_defconfig | 135 +++++--- arch/powerpc/configs/44x/bamboo_defconfig | 255 +++++++++++---- .../powerpc/configs/44x/canyonlands_defconfig | 141 +++++--- arch/powerpc/configs/44x/ebony_defconfig | 258 +++++++++++---- arch/powerpc/configs/44x/eiger_defconfig | 128 +++++--- arch/powerpc/configs/44x/katmai_defconfig | 253 ++++++++++---- arch/powerpc/configs/44x/rainier_defconfig | 254 ++++++++++---- arch/powerpc/configs/44x/redwood_defconfig | 274 +++++++++++----- arch/powerpc/configs/44x/sam440ep_defconfig | 284 +++++++++++----- arch/powerpc/configs/44x/sequoia_defconfig | 202 ++++++++---- arch/powerpc/configs/44x/taishan_defconfig | 258 +++++++++++---- arch/powerpc/configs/44x/warp_defconfig | 228 +++++++++---- arch/powerpc/configs/ppc44x_defconfig | 309 +++++++++++++----- 13 files changed, 2153 insertions(+), 826 deletions(-) diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig index 6f976b51cdd0..1f6d0490e28d 100644 --- a/arch/powerpc/configs/44x/arches_defconfig +++ b/arch/powerpc/configs/44x/arches_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc5 -# Thu Aug 13 14:14:07 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 14:02:35 2010 # # CONFIG_PPC64 is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -33,7 +34,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -56,6 +59,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y @@ -83,11 +87,13 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -121,22 +127,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -144,6 +149,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -169,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -198,6 +232,7 @@ CONFIG_ARCHES=y # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set # CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -241,10 +276,11 @@ CONFIG_BINFMT_ELF=y # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -260,8 +296,7 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y @@ -352,6 +387,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -379,7 +415,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -392,6 +434,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -404,9 +447,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -497,6 +540,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -573,16 +617,17 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -595,6 +640,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -640,6 +686,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -656,6 +703,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -695,11 +743,6 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -709,10 +752,6 @@ CONFIG_I2C_IBM_IIC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -730,6 +769,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -753,6 +797,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -779,6 +824,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -790,9 +836,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -810,10 +854,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -821,6 +868,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -858,6 +906,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -865,6 +914,7 @@ CONFIG_EXT2_FS=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -934,7 +984,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -993,6 +1042,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1010,6 +1060,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1028,10 +1079,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1055,10 +1108,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1080,7 +1133,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig index e57f1e4c1795..788faac6c27a 100644 --- a/arch/powerpc/configs/44x/bamboo_defconfig +++ b/arch/powerpc/configs/44x/bamboo_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:22:33 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 14:09:03 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,11 +57,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -71,9 +79,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -88,8 +108,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -99,19 +123,25 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -123,6 +153,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -134,8 +172,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,19 +180,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -176,6 +235,8 @@ CONFIG_BAMBOO=y # CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -218,10 +279,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -237,10 +300,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -265,6 +331,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -282,14 +349,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -326,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -339,6 +405,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,8 +419,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -365,6 +438,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -386,6 +460,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -398,12 +473,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -423,7 +503,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -444,6 +528,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -462,7 +548,10 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -470,6 +559,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -480,9 +570,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -492,6 +586,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -501,14 +596,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -521,6 +615,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -566,6 +661,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -582,6 +678,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -604,27 +705,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -649,7 +736,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -665,7 +752,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -676,14 +768,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -692,6 +787,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -746,7 +846,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -762,6 +861,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -776,11 +876,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -790,6 +892,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -798,16 +901,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -819,35 +929,45 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -863,13 +983,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -878,10 +1001,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -909,11 +1034,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -950,6 +1077,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -958,5 +1086,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig index b312b166be66..4ef8bcab61f8 100644 --- a/arch/powerpc/configs/44x/canyonlands_defconfig +++ b/arch/powerpc/configs/44x/canyonlands_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 17:27:20 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 14:12:20 2010 # # CONFIG_PPC64 is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -33,7 +34,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -56,6 +59,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y @@ -83,11 +87,13 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -121,22 +127,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -144,6 +149,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -169,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -198,6 +232,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y CONFIG_CANYONLANDS=y # CONFIG_GLACIER is not set # CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -241,10 +276,11 @@ CONFIG_BINFMT_ELF=y # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -260,8 +296,7 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y @@ -352,6 +387,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -379,7 +415,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -392,6 +434,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -404,9 +447,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -508,6 +551,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -585,16 +629,18 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -616,6 +662,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -661,6 +708,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -676,6 +724,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -716,11 +765,6 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -730,10 +774,6 @@ CONFIG_I2C_IBM_IIC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -751,6 +791,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -774,6 +819,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -800,6 +846,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -811,9 +858,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -831,10 +876,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -842,6 +890,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -882,10 +931,12 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y @@ -993,6 +1044,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1014,7 +1066,9 @@ CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1038,6 +1092,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -1045,6 +1100,7 @@ CONFIG_EXT2_FS=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1104,7 +1160,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1201,6 +1256,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1218,6 +1274,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1236,10 +1293,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1263,10 +1322,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1288,7 +1347,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig index b652f7dcab5a..ca17b1496e32 100644 --- a/arch/powerpc/configs/44x/ebony_defconfig +++ b/arch/powerpc/configs/44x/ebony_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:22:36 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 14:20:46 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -19,6 +19,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -30,15 +31,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -70,9 +78,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,31 +107,40 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -123,6 +152,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -134,8 +171,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,19 +179,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -176,6 +234,8 @@ CONFIG_EBONY=y # CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set # CONFIG_PPC44x_SIMPLE is not set @@ -218,10 +278,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -237,10 +299,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -264,6 +329,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -281,14 +347,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -325,6 +389,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -338,6 +403,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -350,8 +417,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -364,6 +436,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -376,9 +449,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -453,7 +526,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -469,6 +541,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -481,12 +554,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -506,7 +584,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -527,6 +609,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -545,7 +629,10 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -553,6 +640,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -563,9 +651,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -575,6 +667,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -584,14 +677,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -604,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -649,6 +742,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -665,6 +759,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -687,27 +786,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -732,7 +817,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -748,7 +833,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -759,14 +849,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -775,6 +868,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -840,7 +938,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -856,6 +953,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -871,11 +969,13 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -885,6 +985,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -893,16 +994,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -914,35 +1022,45 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -958,13 +1076,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -973,10 +1094,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1004,11 +1127,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1045,6 +1170,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig index 007f3bd939e7..e3149bade0b2 100644 --- a/arch/powerpc/configs/44x/eiger_defconfig +++ b/arch/powerpc/configs/44x/eiger_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc6 -# Wed Aug 19 13:06:50 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 14:33:04 2010 # # CONFIG_PPC64 is not set @@ -34,7 +34,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -57,6 +59,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y @@ -84,11 +87,13 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -122,22 +127,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -145,6 +149,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -170,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -243,10 +276,11 @@ CONFIG_BINFMT_ELF=y # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -262,8 +296,7 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y @@ -358,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -387,14 +421,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -407,6 +438,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -419,9 +451,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -522,6 +554,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -573,8 +606,11 @@ CONFIG_SCSI_SAS_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -611,7 +647,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -682,7 +721,9 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -711,12 +752,11 @@ CONFIG_E1000E=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -730,6 +770,7 @@ CONFIG_E1000E=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -775,6 +816,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -791,6 +833,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -830,11 +873,6 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -844,10 +882,6 @@ CONFIG_I2C_IBM_IIC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y @@ -865,7 +899,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -883,10 +916,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -894,6 +930,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -935,6 +972,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -942,6 +980,7 @@ CONFIG_EXT2_FS=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1001,7 +1040,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1059,6 +1097,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1095,10 +1134,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1122,10 +1163,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1147,13 +1188,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y @@ -1197,11 +1241,13 @@ CONFIG_CRYPTO_XTS=y # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=y +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_GHASH=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig index c23a4ef13e45..dec901f9cc84 100644 --- a/arch/powerpc/configs/44x/katmai_defconfig +++ b/arch/powerpc/configs/44x/katmai_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:22:38 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 14:55:34 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -19,6 +19,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -30,15 +31,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -70,9 +78,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -83,8 +103,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -94,19 +118,25 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -118,6 +148,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -129,8 +166,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,19 +174,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -171,6 +229,8 @@ CONFIG_KATMAI=y # CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -212,10 +272,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -231,10 +293,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -259,6 +324,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -276,14 +342,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -320,6 +384,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -333,6 +398,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -345,8 +412,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -359,6 +431,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -380,6 +453,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -392,12 +466,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -417,7 +496,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -440,6 +523,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -458,7 +543,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -466,6 +554,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -476,9 +565,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -488,6 +581,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -497,14 +591,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -517,6 +610,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -562,6 +656,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -578,13 +673,17 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -601,27 +700,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -646,7 +731,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -662,7 +747,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -673,14 +763,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -689,6 +782,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -743,7 +841,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -759,6 +856,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -773,11 +871,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -787,6 +887,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -795,16 +896,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -816,35 +924,43 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -859,13 +975,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -874,10 +993,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -905,11 +1026,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -946,6 +1069,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -954,5 +1078,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig index b25fad1343dc..8fed3b26af2e 100644 --- a/arch/powerpc/configs/44x/rainier_defconfig +++ b/arch/powerpc/configs/44x/rainier_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:22:41 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 14:59:12 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -19,6 +19,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -30,15 +31,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -70,9 +78,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,8 +107,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -98,19 +122,25 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -122,6 +152,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -133,8 +171,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -142,19 +179,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -175,6 +234,8 @@ CONFIG_RAINIER=y # CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -216,10 +277,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -235,10 +298,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -263,6 +329,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -280,14 +347,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -324,6 +389,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -337,6 +403,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -349,8 +417,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -363,6 +436,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -375,9 +449,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -453,7 +527,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -469,6 +542,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -481,12 +555,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -506,7 +585,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -533,6 +616,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -543,9 +627,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -555,6 +643,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -564,14 +653,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -584,6 +672,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -629,6 +718,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -645,6 +735,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -667,27 +762,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -712,7 +793,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -728,7 +809,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -739,14 +825,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -755,6 +844,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -820,7 +914,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -836,6 +929,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -851,11 +945,13 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -865,6 +961,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -873,16 +970,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -894,35 +998,45 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -942,6 +1056,7 @@ CONFIG_PPC_EARLY_DEBUG=y CONFIG_PPC_EARLY_DEBUG_44x=y # CONFIG_PPC_EARLY_DEBUG_40x is not set # CONFIG_PPC_EARLY_DEBUG_CPM is not set +# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300 CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 @@ -951,13 +1066,16 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -966,10 +1084,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -997,11 +1117,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1038,6 +1160,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1046,5 +1169,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/redwood_defconfig b/arch/powerpc/configs/44x/redwood_defconfig index ed31d4f17b5a..a67ec91a28c3 100644 --- a/arch/powerpc/configs/44x/redwood_defconfig +++ b/arch/powerpc/configs/44x/redwood_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Wed Feb 4 14:31:09 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:05:05 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,11 +57,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -71,6 +79,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -78,11 +87,13 @@ CONFIG_POSIX_MQUEUE=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -93,8 +104,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -104,19 +119,25 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -128,6 +149,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -139,8 +168,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,14 +176,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -177,6 +232,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set CONFIG_REDWOOD=y +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -219,10 +275,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -238,10 +296,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -262,12 +323,15 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -285,14 +349,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -329,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -342,6 +405,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -354,13 +419,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -373,6 +438,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -385,9 +451,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -462,7 +528,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -479,6 +544,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -512,10 +578,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -533,23 +595,30 @@ CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -558,7 +627,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -569,8 +637,12 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_FUSION=y @@ -586,7 +658,11 @@ CONFIG_FUSION_MAX_SGE=128 # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -614,6 +690,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -632,7 +710,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -640,6 +721,7 @@ CONFIG_NETDEV_1000=y CONFIG_E1000E=y # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -650,19 +732,21 @@ CONFIG_E1000E=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -676,6 +760,7 @@ CONFIG_E1000E=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -721,6 +806,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -737,6 +823,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -776,11 +863,6 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -790,25 +872,23 @@ CONFIG_I2C_IBM_IIC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y CONFIG_I2C_DEBUG_CHIP=y # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -826,31 +906,21 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -876,7 +946,12 @@ CONFIG_DMADEVICES=y # # DMA Devices # +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -887,14 +962,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -903,6 +981,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -958,7 +1041,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -974,6 +1056,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -988,11 +1071,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1002,6 +1087,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1010,16 +1096,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1031,35 +1124,45 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1075,13 +1178,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y @@ -1092,10 +1198,12 @@ CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=y # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=y CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -1123,11 +1231,13 @@ CONFIG_CRYPTO_XTS=y # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=y +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_GHASH=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1164,6 +1274,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1172,5 +1283,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig index e14e89a5e06b..886cb6aa6432 100644 --- a/arch/powerpc/configs/44x/sam440ep_defconfig +++ b/arch/powerpc/configs/44x/sam440ep_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:22:42 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:11:24 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,11 +57,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -71,9 +79,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_LOG_BUF_SHIFT=14 @@ -89,8 +109,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -99,19 +123,25 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -123,6 +153,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -134,8 +171,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,19 +179,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -176,6 +234,8 @@ CONFIG_SAM440EP=y # CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set # CONFIG_PPC44x_SIMPLE is not set @@ -218,10 +278,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -237,10 +299,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -264,6 +329,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -281,14 +347,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -325,6 +389,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -338,6 +403,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -350,8 +417,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -364,6 +436,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -385,6 +458,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -420,10 +494,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -440,8 +510,10 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y # CONFIG_SATA_PMP is not set # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -463,6 +535,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -488,14 +561,16 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -508,7 +583,11 @@ CONFIG_SATA_SIL=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -529,6 +608,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -547,17 +628,19 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -580,6 +663,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -589,6 +673,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -605,25 +690,30 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -639,6 +729,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -676,6 +767,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -691,6 +783,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y @@ -732,11 +825,6 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -746,27 +834,23 @@ CONFIG_I2C_IBM_IIC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -784,31 +868,21 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -870,6 +944,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_ILI9320 is not set @@ -899,7 +974,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -912,15 +986,18 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -933,10 +1010,11 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -962,17 +1040,20 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -992,11 +1073,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1038,7 +1119,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1054,6 +1134,7 @@ CONFIG_USB_STORAGE=m # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1090,9 +1171,11 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_M41T80_WDT=y +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1110,15 +1193,22 @@ CONFIG_RTC_DRV_M41T80_WDT=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1130,6 +1220,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1142,10 +1233,13 @@ CONFIG_REISERFS_FS=y # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1154,6 +1248,11 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1267,6 +1366,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1281,11 +1381,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1295,27 +1397,29 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1326,7 +1430,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig index 6400aae04dda..1b2f41dbcafb 100644 --- a/arch/powerpc/configs/44x/sequoia_defconfig +++ b/arch/powerpc/configs/44x/sequoia_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Tue Apr 7 17:04:52 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:15:51 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,12 +57,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -72,6 +79,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -79,11 +87,13 @@ CONFIG_POSIX_MQUEUE=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -121,6 +131,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y @@ -129,7 +146,6 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -137,6 +153,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -149,7 +172,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -157,14 +180,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -186,6 +236,7 @@ CONFIG_SEQUOIA=y # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set # CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -228,10 +279,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -247,9 +300,8 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -293,11 +345,11 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # @@ -339,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -353,6 +406,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,7 +419,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -378,6 +438,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -390,9 +451,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -493,6 +554,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -515,6 +577,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -534,14 +597,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -576,7 +642,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -584,6 +653,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -594,6 +664,9 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -619,12 +692,11 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -637,6 +709,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -682,6 +755,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -698,6 +772,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -720,27 +799,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -783,6 +848,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -793,14 +862,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -916,6 +988,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -925,6 +998,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -933,16 +1007,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -954,11 +1035,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -968,27 +1050,30 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1004,13 +1089,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1052,11 +1140,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig index ef32cc4f82eb..12041d355b8c 100644 --- a/arch/powerpc/configs/44x/taishan_defconfig +++ b/arch/powerpc/configs/44x/taishan_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:22:47 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:21:04 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -19,6 +19,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -30,15 +31,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -70,9 +78,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,8 +107,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -98,19 +122,25 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -122,6 +152,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -133,8 +171,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -142,19 +179,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -175,6 +234,8 @@ CONFIG_TAISHAN=y # CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -216,10 +277,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -235,10 +298,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -263,6 +329,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -280,14 +347,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -324,6 +389,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -337,6 +403,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -349,8 +417,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -363,6 +436,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -375,9 +449,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -453,7 +527,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -469,6 +542,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -481,12 +555,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -506,7 +585,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -529,6 +612,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -547,7 +632,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -555,6 +643,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -565,9 +654,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -577,6 +670,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -586,14 +680,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -606,6 +699,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -651,6 +745,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -667,6 +762,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -689,27 +789,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -734,7 +820,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -750,7 +836,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -761,14 +852,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -777,6 +871,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -832,7 +931,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -848,6 +946,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -862,11 +961,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -876,6 +977,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -884,16 +986,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -905,35 +1014,45 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -949,13 +1068,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -964,10 +1086,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -995,11 +1119,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1036,6 +1162,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1044,5 +1171,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index 787635f23d8f..99eff4dd9364 100644 --- a/arch/powerpc/configs/44x/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30 -# Tue Jun 9 23:35:36 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:27:46 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -56,11 +60,13 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -81,11 +87,13 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -111,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -124,6 +131,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -131,7 +145,6 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -139,6 +152,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -151,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -159,14 +179,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -187,6 +234,7 @@ CONFIG_WARP=y # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set # CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set # CONFIG_PPC44x_SIMPLE is not set @@ -229,10 +277,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -248,9 +298,8 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -356,6 +405,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -371,6 +421,7 @@ CONFIG_VLAN_8021Q=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,7 +434,13 @@ CONFIG_VLAN_8021Q=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -396,6 +453,7 @@ CONFIG_VLAN_8021Q=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -407,9 +465,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -513,6 +571,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -524,9 +586,11 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_XILINX_SYSACE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -534,7 +598,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24=y # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -557,15 +623,11 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set -# CONFIG_SCSI_WAIT_SCAN is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -582,7 +644,6 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -609,14 +670,14 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -678,6 +739,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -693,6 +755,7 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -725,17 +788,17 @@ CONFIG_I2C_IBM_IIC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -761,10 +824,19 @@ CONFIG_GPIO_SYSFS=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -787,6 +859,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -812,6 +885,8 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -821,7 +896,6 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y CONFIG_WATCHDOG=y @@ -855,26 +929,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -917,10 +980,11 @@ CONFIG_USB_MON=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -988,6 +1052,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1014,7 +1079,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set -CONFIG_MMC_PIKASD=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1025,9 +1091,10 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y # CONFIG_LEDS_GPIO_PLATFORM is not set CONFIG_LEDS_GPIO_OF=y -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set # # LED Triggers @@ -1048,6 +1115,10 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1065,10 +1136,13 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1145,7 +1219,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1235,6 +1308,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1244,6 +1318,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1261,10 +1336,14 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1276,11 +1355,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1290,27 +1370,30 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1326,13 +1409,16 @@ CONFIG_IRQSTACKS=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y # CONFIG_CRYPTO_MANAGER is not set @@ -1366,11 +1452,13 @@ CONFIG_CRYPTO_ALGAPI2=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index 5e6d55f006bb..46f5c47e9f85 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Fri Jan 23 08:43:46 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 13:42:17 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -20,6 +20,7 @@ CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -54,11 +58,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y -# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_DTC=y +CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -72,9 +80,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,31 +109,40 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -125,6 +154,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -136,8 +172,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -145,20 +180,42 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PREEMPT_NOTIFIERS=y -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -179,8 +236,11 @@ CONFIG_WARP=y CONFIG_ARCHES=y CONFIG_CANYONLANDS=y CONFIG_GLACIER=y +CONFIG_REDWOOD=y +CONFIG_EIGER=y CONFIG_YOSEMITE=y CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y +# CONFIG_XILINX_ML510 is not set CONFIG_PPC44x_SIMPLE=y CONFIG_PPC4xx_GPIO=y CONFIG_440EP=y @@ -190,6 +250,7 @@ CONFIG_440GP=y CONFIG_440GX=y CONFIG_440SPe=y CONFIG_460EX=y +CONFIG_460SX=y CONFIG_IBM440EP_ERR42=y CONFIG_XILINX_VIRTEX=y CONFIG_XILINX_VIRTEX_5_FXT=y @@ -207,6 +268,7 @@ CONFIG_XILINX_VIRTEX_5_FXT=y # CONFIG_FSL_ULI1575 is not set CONFIG_OF_RTC=y # CONFIG_SIMPLE_GPIO is not set +# CONFIG_XILINX_PCI is not set # # Kernel options @@ -230,10 +292,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -249,10 +313,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -276,6 +343,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -293,14 +361,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -352,6 +418,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -360,6 +427,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_STP=m @@ -375,6 +443,8 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -387,8 +457,13 @@ CONFIG_LLC=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -401,6 +476,7 @@ CONFIG_LLC=m # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -413,9 +489,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -490,7 +566,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -498,7 +573,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_RESERVE=1 -CONFIG_MTD_UBI_GLUEBI=y +CONFIG_MTD_UBI_GLUEBI=m # # UBI debugging options @@ -516,6 +591,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -528,14 +604,25 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 CONFIG_XILINX_SYSACE=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -558,10 +645,6 @@ CONFIG_BLK_DEV_SD=m # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -578,6 +661,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -587,7 +671,11 @@ CONFIG_SCSI_WAIT_SCAN=m # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -608,6 +696,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -626,7 +716,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -634,6 +727,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -644,9 +738,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -656,6 +754,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -665,14 +764,14 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -695,6 +794,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -713,6 +813,7 @@ CONFIG_SERIO=m # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set CONFIG_SERIO_XILINX_XPS_PS2=m +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -747,6 +848,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -764,6 +866,7 @@ CONFIG_XILINX_HWICAP=m CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=m @@ -806,11 +909,6 @@ CONFIG_I2C_IBM_IIC=m # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -820,20 +918,17 @@ CONFIG_I2C_IBM_IIC=m # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -855,16 +950,21 @@ CONFIG_GPIO_XILINX=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -884,28 +984,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -961,6 +1048,7 @@ CONFIG_FB_XILINX=m # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -994,19 +1082,22 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=m -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y # CONFIG_USB_OHCI_HCD_PCI is not set CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1030,11 +1121,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1075,7 +1166,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1083,6 +1173,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1091,6 +1182,7 @@ CONFIG_USB_STORAGE=m # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1100,7 +1192,12 @@ CONFIG_USB_STORAGE=m # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1110,6 +1207,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1119,11 +1217,13 @@ CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1132,6 +1232,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1206,7 +1311,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1261,6 +1365,7 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1278,11 +1383,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1292,6 +1399,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1300,16 +1408,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1321,35 +1436,43 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1363,13 +1486,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1378,10 +1504,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1409,11 +1537,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1450,6 +1580,7 @@ CONFIG_CRYPTO_DES=y # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set CONFIG_CRYPTO_LZO=m # From 02ea22896a66026f70ecee43527b15f9ca21b116 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Mon, 4 Jan 2010 10:59:32 -0500 Subject: [PATCH 0349/1626] powerpc/40x: Update the PowerPC 40x board defconfigs Update the 40x defconfigs for 2.6.33 Signed-off-by: Josh Boyer --- arch/powerpc/configs/40x/acadia_defconfig | 241 +++++++++++----- arch/powerpc/configs/40x/ep405_defconfig | 307 ++++++++++++++++----- arch/powerpc/configs/40x/hcu4_defconfig | 256 ++++++++++++----- arch/powerpc/configs/40x/kilauea_defconfig | 140 +++++++--- arch/powerpc/configs/40x/makalu_defconfig | 190 +++++++++---- arch/powerpc/configs/40x/walnut_defconfig | 257 ++++++++++++----- arch/powerpc/configs/ppc40x_defconfig | 292 ++++++++++++++------ 7 files changed, 1238 insertions(+), 445 deletions(-) diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig index 173a5bb77ca1..8e95f8d227b9 100644 --- a/arch/powerpc/configs/40x/acadia_defconfig +++ b/arch/powerpc/configs/40x/acadia_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:17:46 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:33:07 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set CONFIG_40x=y @@ -16,6 +16,7 @@ CONFIG_40x=y # CONFIG_E200 is not set CONFIG_4xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -27,15 +28,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -49,11 +53,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -67,9 +75,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -84,31 +104,40 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -120,6 +149,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,8 +168,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -140,19 +176,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -166,6 +224,7 @@ CONFIG_CLASSIC_RCU=y CONFIG_ACADIA=y # CONFIG_EP405 is not set # CONFIG_HCU4 is not set +# CONFIG_HOTFOOT is not set # CONFIG_KILAUEA is not set # CONFIG_MAKALU is not set # CONFIG_WALNUT is not set @@ -208,10 +267,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -227,10 +288,12 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -255,6 +318,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -272,14 +336,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -316,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -329,6 +392,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -341,8 +406,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -355,6 +425,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -367,9 +438,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -445,7 +516,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -461,6 +531,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -491,7 +562,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -512,6 +587,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -530,17 +607,18 @@ CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT=y CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -553,6 +631,7 @@ CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -598,6 +677,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -614,6 +694,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -636,27 +721,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -678,7 +749,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -689,14 +765,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -705,6 +784,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -760,7 +844,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -776,6 +859,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -790,11 +874,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -804,6 +890,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -812,16 +899,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -833,35 +927,45 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -877,13 +981,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -892,10 +999,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -923,11 +1032,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -964,6 +1075,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -972,5 +1084,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig index e9b8495cde0c..918f23fd2b18 100644 --- a/arch/powerpc/configs/40x/ep405_defconfig +++ b/arch/powerpc/configs/40x/ep405_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:17:48 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:37:34 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set CONFIG_40x=y @@ -16,6 +16,7 @@ CONFIG_40x=y # CONFIG_E200 is not set CONFIG_4xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -27,15 +28,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -49,11 +53,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -67,9 +75,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -84,31 +104,40 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -120,6 +149,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,8 +168,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -140,19 +176,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -166,6 +224,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ACADIA is not set CONFIG_EP405=y # CONFIG_HCU4 is not set +# CONFIG_HOTFOOT is not set # CONFIG_KILAUEA is not set # CONFIG_MAKALU is not set # CONFIG_WALNUT is not set @@ -210,10 +269,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -229,10 +290,12 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -257,6 +320,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -274,14 +338,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -318,6 +380,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -331,6 +394,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -343,8 +408,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -357,6 +427,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -369,9 +440,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -447,7 +518,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -463,6 +533,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -476,12 +547,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -501,7 +577,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -522,6 +602,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -540,7 +622,10 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -548,6 +633,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -558,9 +644,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -570,6 +660,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -579,14 +670,14 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -608,6 +699,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -653,6 +745,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -669,6 +762,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -691,27 +789,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -748,14 +832,16 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -775,11 +861,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_LIBUSUAL is not set @@ -807,7 +893,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -822,6 +907,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -831,7 +917,12 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -842,14 +933,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -858,6 +952,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -913,7 +1012,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -927,8 +1025,48 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -943,11 +1081,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -957,6 +1097,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -965,16 +1106,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -986,35 +1134,45 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1030,13 +1188,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1045,10 +1206,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1076,11 +1239,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1117,6 +1282,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1125,5 +1291,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig index 8c019d79bf2a..f87ef0382280 100644 --- a/arch/powerpc/configs/40x/hcu4_defconfig +++ b/arch/powerpc/configs/40x/hcu4_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:17:50 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:45:11 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set CONFIG_40x=y @@ -16,6 +16,7 @@ CONFIG_40x=y # CONFIG_E200 is not set CONFIG_4xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -27,15 +28,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -49,11 +53,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -67,9 +75,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -84,31 +104,40 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -120,6 +149,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,8 +168,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -140,19 +176,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -166,6 +224,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ACADIA is not set # CONFIG_EP405 is not set CONFIG_HCU4=y +# CONFIG_HOTFOOT is not set # CONFIG_KILAUEA is not set # CONFIG_MAKALU is not set # CONFIG_WALNUT is not set @@ -208,10 +267,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -227,10 +288,12 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -255,6 +318,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -272,14 +336,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -316,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -329,6 +392,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -341,8 +406,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -355,6 +425,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -367,9 +438,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -445,7 +516,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -461,6 +531,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -473,12 +544,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -498,7 +574,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -519,6 +599,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -537,7 +619,10 @@ CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -545,6 +630,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -555,9 +641,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -567,6 +657,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -576,14 +667,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -596,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -641,6 +732,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -657,13 +749,17 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -680,27 +776,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -722,7 +804,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -733,14 +820,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -749,6 +839,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -804,7 +899,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -820,6 +914,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -834,11 +929,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -848,6 +945,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -856,16 +954,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -877,35 +982,45 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -921,13 +1036,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -936,10 +1054,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -967,11 +1087,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1008,6 +1130,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1016,5 +1139,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig index 9a05ec0ec312..19fbcb075376 100644 --- a/arch/powerpc/configs/40x/kilauea_defconfig +++ b/arch/powerpc/configs/40x/kilauea_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 13:28:37 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:51:23 2010 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_40x=y # CONFIG_E200 is not set CONFIG_4xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,7 +30,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -52,6 +55,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y @@ -79,11 +83,13 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -121,22 +127,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -144,6 +149,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -169,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -190,6 +224,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # CONFIG_ACADIA is not set # CONFIG_EP405 is not set # CONFIG_HCU4 is not set +# CONFIG_HOTFOOT is not set CONFIG_KILAUEA=y # CONFIG_MAKALU is not set # CONFIG_WALNUT is not set @@ -233,10 +268,11 @@ CONFIG_BINFMT_ELF=y # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -252,8 +288,7 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -343,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -370,7 +406,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -383,6 +425,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -395,9 +438,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -498,6 +541,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -574,16 +618,17 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -596,6 +641,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -641,6 +687,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -656,6 +703,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -695,11 +743,6 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -709,10 +752,6 @@ CONFIG_I2C_IBM_IIC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -730,6 +769,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -753,6 +797,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -779,6 +824,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -790,7 +836,6 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set @@ -810,10 +855,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -821,6 +869,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -868,6 +917,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -889,7 +939,9 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -913,6 +965,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -920,6 +973,7 @@ CONFIG_EXT2_FS=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -979,7 +1033,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1037,6 +1090,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1054,6 +1108,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1072,10 +1127,12 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1099,10 +1156,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1124,13 +1181,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1172,11 +1232,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig index 146747547873..eb41cd695979 100644 --- a/arch/powerpc/configs/40x/makalu_defconfig +++ b/arch/powerpc/configs/40x/makalu_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc7 -# Wed Jun 3 09:11:02 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:55:12 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set CONFIG_40x=y @@ -16,6 +16,7 @@ CONFIG_40x=y # CONFIG_E200 is not set CONFIG_4xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,14 +30,16 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +55,13 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -78,11 +83,13 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -108,7 +115,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -121,6 +127,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y @@ -129,7 +142,6 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -137,6 +149,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -149,7 +168,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -157,14 +176,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -178,6 +224,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # CONFIG_ACADIA is not set # CONFIG_EP405 is not set # CONFIG_HCU4 is not set +# CONFIG_HOTFOOT is not set # CONFIG_KILAUEA is not set CONFIG_MAKALU=y # CONFIG_WALNUT is not set @@ -220,10 +267,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -239,9 +288,8 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -330,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -344,6 +393,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -356,7 +406,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -369,6 +425,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -381,9 +438,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -474,6 +531,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -504,14 +562,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -546,16 +607,18 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -568,6 +631,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -613,6 +677,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -629,6 +694,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -651,27 +721,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -695,6 +751,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -705,14 +765,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -770,7 +833,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -818,6 +880,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -827,6 +890,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -844,10 +908,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -859,11 +927,12 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -873,24 +942,26 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -910,13 +981,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -958,11 +1032,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig index 5ab29dddd21c..bfff0eae39d2 100644 --- a/arch/powerpc/configs/40x/walnut_defconfig +++ b/arch/powerpc/configs/40x/walnut_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:17:57 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 15:56:30 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set CONFIG_40x=y @@ -16,6 +16,7 @@ CONFIG_40x=y # CONFIG_E200 is not set CONFIG_4xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -27,15 +28,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -49,11 +53,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -67,9 +75,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -84,31 +104,40 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -120,6 +149,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,8 +168,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -140,19 +176,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -166,6 +224,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ACADIA is not set # CONFIG_EP405 is not set # CONFIG_HCU4 is not set +# CONFIG_HOTFOOT is not set # CONFIG_KILAUEA is not set # CONFIG_MAKALU is not set CONFIG_WALNUT=y @@ -211,10 +270,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -230,10 +291,12 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,6 +321,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -275,14 +339,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -319,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -332,6 +395,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -344,8 +409,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -358,6 +428,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -370,9 +441,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -448,7 +519,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -464,6 +534,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -476,12 +547,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -501,7 +577,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -522,6 +602,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -540,7 +622,10 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -548,6 +633,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -558,9 +644,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -570,6 +660,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -579,14 +670,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -599,6 +689,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -644,6 +735,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -660,6 +752,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -682,27 +779,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -727,7 +810,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -743,7 +826,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -754,14 +842,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -770,6 +861,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -825,7 +921,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -841,6 +936,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -855,11 +951,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -869,6 +967,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -877,16 +976,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -898,35 +1004,45 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -942,13 +1058,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -957,10 +1076,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -988,11 +1109,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1029,6 +1152,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1037,5 +1161,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig index 326205cabf77..35b60683cde5 100644 --- a/arch/powerpc/configs/ppc40x_defconfig +++ b/arch/powerpc/configs/ppc40x_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Fri Jan 23 08:44:03 2009 +# Linux kernel version: 2.6.33-rc1 +# Mon Jan 4 13:54:06 2010 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set CONFIG_40x=y @@ -16,6 +16,7 @@ CONFIG_40x=y # CONFIG_E200 is not set CONFIG_4xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -27,15 +28,18 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -50,11 +54,15 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y -# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_DTC=y +CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -68,9 +76,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -85,31 +105,40 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -121,6 +150,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,8 +169,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -141,19 +177,41 @@ CONFIG_LBD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -168,12 +226,14 @@ CONFIG_XILINX_VIRTEX=y CONFIG_ACADIA=y CONFIG_EP405=y CONFIG_HCU4=y +CONFIG_HOTFOOT=y CONFIG_KILAUEA=y CONFIG_MAKALU=y CONFIG_WALNUT=y CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y CONFIG_PPC40x_SIMPLE=y CONFIG_405GP=y +CONFIG_405EP=y CONFIG_405EX=y CONFIG_405EZ=y CONFIG_405GPR=y @@ -195,6 +255,7 @@ CONFIG_IBM405_ERR51=y # CONFIG_FSL_ULI1575 is not set CONFIG_OF_RTC=y # CONFIG_SIMPLE_GPIO is not set +# CONFIG_XILINX_PCI is not set # # Kernel options @@ -218,10 +279,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -237,10 +300,12 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -265,6 +330,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -282,14 +348,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -341,6 +405,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -349,6 +414,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -362,6 +428,8 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -374,13 +442,13 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -393,6 +461,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -405,9 +474,9 @@ CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -483,7 +552,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -491,7 +559,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_RESERVE=1 -CONFIG_MTD_UBI_GLUEBI=y +CONFIG_MTD_UBI_GLUEBI=m # # UBI debugging options @@ -509,6 +577,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -520,14 +589,25 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 CONFIG_XILINX_SYSACE=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -547,7 +627,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -568,6 +652,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -586,7 +672,10 @@ CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT=y CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -594,6 +683,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -604,9 +694,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -616,6 +710,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -625,14 +720,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -645,6 +739,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -663,6 +758,7 @@ CONFIG_SERIO=m # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set CONFIG_SERIO_XILINX_XPS_PS2=m +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -697,6 +793,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -714,6 +811,7 @@ CONFIG_XILINX_HWICAP=m CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=m @@ -755,11 +853,6 @@ CONFIG_I2C_IBM_IIC=m # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -769,20 +862,17 @@ CONFIG_I2C_IBM_IIC=m # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -804,11 +894,17 @@ CONFIG_GPIO_XILINX=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -832,28 +928,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -909,6 +992,7 @@ CONFIG_FB_XILINX=m # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -930,7 +1014,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -946,7 +1030,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -956,6 +1045,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -966,11 +1056,13 @@ CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -979,6 +1071,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1053,7 +1150,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1108,6 +1204,7 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1125,11 +1222,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1139,6 +1238,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1147,16 +1247,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1168,35 +1275,45 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1212,13 +1329,16 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1227,10 +1347,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1258,11 +1380,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1299,6 +1423,7 @@ CONFIG_CRYPTO_DES=y # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set CONFIG_CRYPTO_LZO=m # @@ -1307,5 +1432,6 @@ CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set From 40da4186a53e59d801130156ecb89fc5830ff227 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Tue, 15 Dec 2009 11:38:04 +0900 Subject: [PATCH 0350/1626] PCI: pcie portdrv: style cleanup No change in logic. Before: drivers/pci/pcie/portdrv_core.c: total: 7 errors, 2 warnings, 508 lines checked drivers/pci/pcie/portdrv_pci.c: total: 4 errors, 2 warnings, 300 lines checked After: drivers/pci/pcie/portdrv_core.c: total: 0 errors, 0 warnings, 506 lines checked drivers/pci/pcie/portdrv_pci.c: total: 0 errors, 0 warnings, 299 lines checked Signed-off-by: Hidetoshi Seto Signed-off-by: Jesse Barnes --- drivers/pci/pcie/portdrv_core.c | 16 +++++++--------- drivers/pci/pcie/portdrv_pci.c | 17 ++++++++--------- 2 files changed, 15 insertions(+), 18 deletions(-) diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 413262eb95b7..b174188ac121 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -27,7 +27,7 @@ */ static void release_pcie_device(struct device *dev) { - kfree(to_pcie_device(dev)); + kfree(to_pcie_device(dev)); } /** @@ -346,12 +346,11 @@ static int suspend_iter(struct device *dev, void *data) { struct pcie_port_service_driver *service_driver; - if ((dev->bus == &pcie_port_bus_type) && - (dev->driver)) { - service_driver = to_service_driver(dev->driver); - if (service_driver->suspend) - service_driver->suspend(to_pcie_device(dev)); - } + if ((dev->bus == &pcie_port_bus_type) && dev->driver) { + service_driver = to_service_driver(dev->driver); + if (service_driver->suspend) + service_driver->suspend(to_pcie_device(dev)); + } return 0; } @@ -494,6 +493,7 @@ int pcie_port_service_register(struct pcie_port_service_driver *new) return driver_register(&new->driver); } +EXPORT_SYMBOL(pcie_port_service_register); /** * pcie_port_service_unregister - unregister PCI Express port service driver @@ -503,6 +503,4 @@ void pcie_port_service_unregister(struct pcie_port_service_driver *drv) { driver_unregister(&drv->driver); } - -EXPORT_SYMBOL(pcie_port_service_register); EXPORT_SYMBOL(pcie_port_service_unregister); diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 34d65172a4d7..13c8972886e6 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -63,7 +63,7 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = { * pcie_portdrv_probe - Probe PCI-Express port devices * @dev: PCI-Express port device being probed * - * If detected invokes the pcie_port_device_register() method for + * If detected invokes the pcie_port_device_register() method for * this port device. * */ @@ -78,7 +78,7 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev, (dev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM))) return -ENODEV; - if (!dev->irq && dev->pin) { + if (!dev->irq && dev->pin) { dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; " "check vendor BIOS\n", dev->vendor, dev->device); } @@ -91,7 +91,7 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev, return 0; } -static void pcie_portdrv_remove (struct pci_dev *dev) +static void pcie_portdrv_remove(struct pci_dev *dev) { pcie_port_device_remove(dev); pci_disable_device(dev); @@ -129,14 +129,13 @@ static int error_detected_iter(struct device *device, void *data) static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev, enum pci_channel_state error) { - struct aer_broadcast_data result_data = - {error, PCI_ERS_RESULT_CAN_RECOVER}; - int retval; + struct aer_broadcast_data data = {error, PCI_ERS_RESULT_CAN_RECOVER}; + int ret; /* can not fail */ - retval = device_for_each_child(&dev->dev, &result_data, error_detected_iter); + ret = device_for_each_child(&dev->dev, &data, error_detected_iter); - return result_data.result; + return data.result; } static int mmio_enabled_iter(struct device *device, void *data) @@ -290,7 +289,7 @@ static int __init pcie_portdrv_init(void) return retval; } -static void __exit pcie_portdrv_exit(void) +static void __exit pcie_portdrv_exit(void) { pci_unregister_driver(&pcie_portdriver); pcie_port_bus_unregister(); From 46256f83d0d066f99ffde547f27473dfd2a78009 Mon Sep 17 00:00:00 2001 From: "Youquan,Song" Date: Fri, 11 Dec 2009 18:42:35 -0500 Subject: [PATCH 0351/1626] PCI: AER: fix aer inject result in kernel oops If the BIOS does not export _OSC to allow OS take over the PCIe AER, the pcie aer driver will not initialize the aer service. However, the aer_inject driver does not check this scenario, which results in a kernel oops when injecting an aer error into OS. For example: BUG: unable to handle kernel NULL pointer dereference at 0000000000000350 IP: [] _spin_lock_irqsave+0xc/0x23 PGD 155c41067 PUD 157fe0067 PMD 0 Oops: 0002 [#1] SMP Pid: 5119, comm: aer-inject Not tainted 2.6.32-rc8-mce #2 RIP: 0010:[] [] _spin_lock_irqsave+0xc/0x23 RSP: 0018:ffff880157f81e28 EFLAGS: 00010096 RAX: 0000000000000296 RBX: 0000000000000000 RCX: 0000000000000100 RDX: 0000000000010000 RSI: 0000000000000246 RDI: 0000000000000350 RBP: ffff880157f81e28 R08: 0000000000000004 R09: ffff880157f81dac R10: ffff88015a666f60 R11: ffff88015a666f40 R12: ffff88015758cc00 R13: 0000000000000350 R14: 0000000000000000 R15: 0000000000000100 FS: 00007f4d4a66e6f0(0000) GS:ffff8800282e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000350 CR3: 000000015661a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process aer-inject (pid: 5119, threadinfo ffff880157f80000, task ffff8801585f4340) Stack: ffff880157f81e78 ffffffff811b1615 ffff880157f81e78 ffffffff81222823 Call Trace: [] aer_irq+0x38/0x117 [] ? device_for_each_child+0x5f/0x6f [] aer_inject_write+0x409/0x45e [aer_inject] [] vfs_write+0xae/0x16a [] sys_write+0x47/0x6e [] system_call_fastpath+0x16/0x1b RIP [] _spin_lock_irqsave+0xc/0x23 RSP CR2: 0000000000000350 So check the _OSC before assuming that AER is available to the OS. Signed-off-by: Youquan, Song Acked-by: Ying, Huang Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aer/aer_inject.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 797d47809f7a..dd7155a037e7 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -413,8 +413,14 @@ static int aer_inject(struct aer_error_inj *einj) if (ret) goto out_put; - if (find_aer_device(rpdev, &edev)) + if (find_aer_device(rpdev, &edev)) { + if (!get_service_data(edev)) { + printk(KERN_WARNING "AER service is not initialized\n"); + ret = -EINVAL; + goto out_put; + } aer_irq(-1, edev); + } else ret = -EINVAL; out_put: From 91e6ecada757a6e2ef7b937634af8a04376772a1 Mon Sep 17 00:00:00 2001 From: Ed Lin Date: Fri, 18 Dec 2009 17:34:51 -0800 Subject: [PATCH 0352/1626] [SCSI] stex: fix scan of nonexistent lun During a manual scan, a user can send command to a nonexistent lun, precisely at the point of max_lun. Normally it's possible (but not required) that the firmware has the knowledge that it is an invalid lun. In the particular case when max_lun is 256, however, the nonexistent lun 256 will be confused with lun 0, because the lun member in a request message is only u8, and 256 will become 0. So we need to fix the problem, at least, at the driver level. Signed-off-by: Ed Lin Signed-off-by: James Bottomley --- drivers/scsi/stex.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index 3058bb1aff95..fd7b15be7640 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c @@ -623,6 +623,11 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) } break; case INQUIRY: + if (lun >= host->max_lun) { + cmd->result = DID_NO_CONNECT << 16; + done(cmd); + return 0; + } if (id != host->max_id - 1) break; if (!lun && !cmd->device->channel && From eeead8115276a76675dc7cfc823a2461745edd27 Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 21 Dec 2009 17:01:23 -0500 Subject: [PATCH 0353/1626] [SCSI] lpfc 8.3.7: Fix FC protocol errors Fix FC protocol errors: - Fix multi-frame unsolicited sequences not queued properly - Fix frames for unsolicited sequences not being associated with sequence. - Fix unsolicited frame buffer sizes are not set properly - Fix Sequence count for unsolicited frame headers not byte swapped. - Fix Multi-frame sequence response frames go to wrong DID. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_hw4.h | 2 +- drivers/scsi/lpfc/lpfc_sli.c | 21 ++++++++++++++------- 2 files changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 1585148a17e5..09c8e362aee3 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -1013,7 +1013,7 @@ struct lpfc_mbx_wq_destroy { }; #define LPFC_HDR_BUF_SIZE 128 -#define LPFC_DATA_BUF_SIZE 4096 +#define LPFC_DATA_BUF_SIZE 2048 struct rq_context { uint32_t word0; #define lpfc_rq_context_rq_size_SHIFT 16 diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 7935667b81a5..50f72bf18256 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -5848,7 +5848,6 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, iocbq->iocb.un.ulpWord[3]); wqe->generic.word3 = 0; bf_set(wqe_rcvoxid, &wqe->generic, iocbq->iocb.ulpContext); - bf_set(wqe_xc, &wqe->generic, 1); /* The entire sequence is transmitted for this IOCB */ xmit_len = total_len; cmnd = CMD_XMIT_SEQUENCE64_CR; @@ -10944,7 +10943,8 @@ lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf) return dmabuf; } temp_hdr = seq_dmabuf->hbuf.virt; - if (new_hdr->fh_seq_cnt < temp_hdr->fh_seq_cnt) { + if (be16_to_cpu(new_hdr->fh_seq_cnt) < + be16_to_cpu(temp_hdr->fh_seq_cnt)) { list_del_init(&seq_dmabuf->hbuf.list); list_add_tail(&dmabuf->hbuf.list, &vport->rcv_buffer_list); list_add_tail(&dmabuf->dbuf.list, &seq_dmabuf->dbuf.list); @@ -10955,6 +10955,11 @@ lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf) list_move_tail(&seq_dmabuf->hbuf.list, &vport->rcv_buffer_list); seq_dmabuf->time_stamp = jiffies; lpfc_update_rcv_time_stamp(vport); + if (list_empty(&seq_dmabuf->dbuf.list)) { + temp_hdr = dmabuf->hbuf.virt; + list_add_tail(&dmabuf->dbuf.list, &seq_dmabuf->dbuf.list); + return seq_dmabuf; + } /* find the correct place in the sequence to insert this frame */ list_for_each_entry_reverse(d_buf, &seq_dmabuf->dbuf.list, list) { temp_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf); @@ -10963,7 +10968,8 @@ lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf) * If the frame's sequence count is greater than the frame on * the list then insert the frame right after this frame */ - if (new_hdr->fh_seq_cnt > temp_hdr->fh_seq_cnt) { + if (be16_to_cpu(new_hdr->fh_seq_cnt) > + be16_to_cpu(temp_hdr->fh_seq_cnt)) { list_add(&dmabuf->dbuf.list, &temp_dmabuf->dbuf.list); return seq_dmabuf; } @@ -11210,7 +11216,7 @@ lpfc_seq_complete(struct hbq_dmabuf *dmabuf) seq_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf); hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt; /* If there is a hole in the sequence count then fail. */ - if (++seq_count != hdr->fh_seq_cnt) + if (++seq_count != be16_to_cpu(hdr->fh_seq_cnt)) return 0; fctl = (hdr->fh_f_ctl[0] << 16 | hdr->fh_f_ctl[1] << 8 | @@ -11242,6 +11248,7 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf) struct lpfc_iocbq *first_iocbq, *iocbq; struct fc_frame_header *fc_hdr; uint32_t sid; + struct ulp_bde64 *pbde; fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt; /* remove from receive buffer list */ @@ -11283,8 +11290,9 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf) if (!iocbq->context3) { iocbq->context3 = d_buf; iocbq->iocb.ulpBdeCount++; - iocbq->iocb.unsli3.rcvsli3.bde2.tus.f.bdeSize = - LPFC_DATA_BUF_SIZE; + pbde = (struct ulp_bde64 *) + &iocbq->iocb.unsli3.sli3Words[4]; + pbde->tus.f.bdeSize = LPFC_DATA_BUF_SIZE; first_iocbq->iocb.unsli3.rcvsli3.acc_len += bf_get(lpfc_rcqe_length, &seq_dmabuf->cq_event.cqe.rcqe_cmpl); @@ -11407,7 +11415,6 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba, * frame to be freed when it is finished. **/ lpfc_sli_hbqbuf_fill_hbqs(phba, LPFC_ELS_HBQ, 1); - dmabuf->tag = -1; return; } /* Send the complete sequence to the upper layer protocol */ From 1987807d4a7f52ca86034865283b207ab9be79c8 Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 21 Dec 2009 17:02:00 -0500 Subject: [PATCH 0354/1626] [SCSI] lpfc 8.3.7: Fix NPIV operation errors Fix NPIV operation errors: - Fix vport not logging out of fabric when being deleted - Fix vport fails to discover targets after devloss timeout. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_els.c | 2 +- drivers/scsi/lpfc/lpfc_hbadisc.c | 1 + drivers/scsi/lpfc/lpfc_vport.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index ce522702a6c1..bb2e43a9e96c 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -5948,8 +5948,8 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) lpfc_initial_fdisc(vport); break; } - } else { + vport->vpi_state |= LPFC_VPI_REGISTERED; if (vport == phba->pport) if (phba->sli_rev < LPFC_SLI_REV4) lpfc_issue_fabric_reglogin(vport); diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 3b9424427652..401167de4ff0 100755 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -2260,6 +2260,7 @@ lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) break; } vport->vpi_state &= ~LPFC_VPI_REGISTERED; + vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; vport->unreg_vpi_cmpl = VPORT_OK; mempool_free(pmb, phba->mbox_mem_pool); /* diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index 7d6dd83d3592..c3a70c4c9433 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -700,7 +700,7 @@ lpfc_vport_delete(struct fc_vport *fc_vport) } spin_unlock_irq(&phba->ndlp_lock); } - if (vport->vpi_state != LPFC_VPI_REGISTERED) + if (!(vport->vpi_state & LPFC_VPI_REGISTERED)) goto skip_logo; vport->unreg_vpi_cmpl = VPORT_INVAL; timeout = msecs_to_jiffies(phba->fc_ratov * 2000); From def9c7a994f194377a23e687e6fd39b46c3ce631 Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 21 Dec 2009 17:02:28 -0500 Subject: [PATCH 0355/1626] [SCSI] lpfc 8.3.7: Fix hardware/SLI relates issues Fix hardware/SLI relates issues: - Fix CNA uses more than one EQ when in INTx interrupt mode. - Fix driver tries to process failed read FCF record mailbox request. - Fix allocating single receive buffer breaks FCoE receive queue. - Support new read FCF record mailbox error case. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_hbadisc.c | 14 ++++++++++---- drivers/scsi/lpfc/lpfc_hw4.h | 1 + drivers/scsi/lpfc/lpfc_init.c | 3 +++ drivers/scsi/lpfc/lpfc_sli.c | 27 +++++++++++++++------------ drivers/scsi/lpfc/lpfc_sli4.h | 2 +- 5 files changed, 30 insertions(+), 17 deletions(-) mode change 100644 => 100755 drivers/scsi/lpfc/lpfc_hw4.h diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 401167de4ff0..f40b9609f6e4 100755 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1555,10 +1555,16 @@ lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) * to book keeping the FCFIs can be used. */ if (shdr_status || shdr_add_status) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "2521 READ_FCF_RECORD mailbox failed " - "with status x%x add_status x%x, mbx\n", - shdr_status, shdr_add_status); + if (shdr_status == STATUS_FCF_TABLE_EMPTY) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2726 READ_FCF_RECORD Indicates empty " + "FCF table.\n"); + } else { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2521 READ_FCF_RECORD mailbox failed " + "with status x%x add_status x%x, mbx\n", + shdr_status, shdr_add_status); + } goto out; } /* Interpreting the returned information of FCF records */ diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h old mode 100644 new mode 100755 index 09c8e362aee3..8a2a1c5935c6 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -1371,6 +1371,7 @@ struct lpfc_mbx_query_fw_cfg { #define STATUS_ERROR_ACITMAIN 0x2a #define STATUS_REBOOT_REQUIRED 0x2c #define STATUS_FCF_IN_USE 0x3a +#define STATUS_FCF_TABLE_EMPTY 0x43 struct lpfc_mbx_sli4_config { struct mbox_header header; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index d4da6bdd0e73..7083ef3b3878 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -7507,6 +7507,9 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) error = -ENODEV; goto out_free_sysfs_attr; } + /* Default to single FCP EQ for non-MSI-X */ + if (phba->intr_type != MSIX) + phba->cfg_fcp_eq_count = 1; /* Set up SLI-4 HBA */ if (lpfc_sli4_hba_setup(phba)) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 50f72bf18256..589549b2bf0e 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1383,7 +1383,7 @@ lpfc_sli_hbq_to_firmware_s4(struct lpfc_hba *phba, uint32_t hbqno, /* HBQ for ELS and CT traffic. */ static struct lpfc_hbq_init lpfc_els_hbq = { .rn = 1, - .entry_count = 200, + .entry_count = 256, .mask_count = 0, .profile = 0, .ring_mask = (1 << LPFC_ELS_RING), @@ -1482,8 +1482,11 @@ err: int lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno) { - return(lpfc_sli_hbqbuf_fill_hbqs(phba, qno, - lpfc_hbq_defs[qno]->add_count)); + if (phba->sli_rev == LPFC_SLI_REV4) + return 0; + else + return lpfc_sli_hbqbuf_fill_hbqs(phba, qno, + lpfc_hbq_defs[qno]->add_count); } /** @@ -1498,8 +1501,12 @@ lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno) static int lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno) { - return(lpfc_sli_hbqbuf_fill_hbqs(phba, qno, - lpfc_hbq_defs[qno]->init_count)); + if (phba->sli_rev == LPFC_SLI_REV4) + return lpfc_sli_hbqbuf_fill_hbqs(phba, qno, + lpfc_hbq_defs[qno]->entry_count); + else + return lpfc_sli_hbqbuf_fill_hbqs(phba, qno, + lpfc_hbq_defs[qno]->init_count); } /** @@ -4110,6 +4117,7 @@ lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq, if (rc) { dma_free_coherent(&phba->pcidev->dev, dma_size, dmabuf->virt, dmabuf->phys); + kfree(dmabuf); return -EIO; } @@ -11409,14 +11417,9 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba, return; } /* If not last frame in sequence continue processing frames. */ - if (!lpfc_seq_complete(seq_dmabuf)) { - /* - * When saving off frames post a new one and mark this - * frame to be freed when it is finished. - **/ - lpfc_sli_hbqbuf_fill_hbqs(phba, LPFC_ELS_HBQ, 1); + if (!lpfc_seq_complete(seq_dmabuf)) return; - } + /* Send the complete sequence to the upper layer protocol */ lpfc_sli4_send_seq_to_ulp(vport, seq_dmabuf); } diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index 25d66d070cf8..44e5f574236b 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -28,7 +28,7 @@ /* Multi-queue arrangement for fast-path FCP work queues */ #define LPFC_FN_EQN_MAX 8 #define LPFC_SP_EQN_DEF 1 -#define LPFC_FP_EQN_DEF 1 +#define LPFC_FP_EQN_DEF 4 #define LPFC_FP_EQN_MIN 1 #define LPFC_FP_EQN_MAX (LPFC_FN_EQN_MAX - LPFC_SP_EQN_DEF) From aacc20e35edfb86cf66c5ee8d9f3d06a98362fd1 Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 21 Dec 2009 17:02:51 -0500 Subject: [PATCH 0356/1626] [SCSI] lpfc 8.3.7: Fix SCSI protocol related errors. Fix SCSI protocol related errors: - Avoid I/O failures during EEH and HBA/CNA reset by correcting when we block the targets on the adapter. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++++ drivers/scsi/lpfc/lpfc_init.c | 5 +++-- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index f40b9609f6e4..1c2737293eb5 100755 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -747,6 +747,10 @@ lpfc_linkdown(struct lpfc_hba *phba) if (phba->link_state == LPFC_LINK_DOWN) return 0; + + /* Block all SCSI stack I/Os */ + lpfc_scsi_dev_block(phba); + spin_lock_irq(&phba->hbalock); phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_DISCOVERED); if (phba->link_state > LPFC_LINK_DOWN) { diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 7083ef3b3878..974ea6d85efe 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -7226,8 +7226,6 @@ lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2711 PCI channel permanent disable for failure\n"); - /* Block all SCSI devices' I/Os on the host */ - lpfc_scsi_dev_block(phba); /* Clean up all driver's outstanding SCSI I/Os */ lpfc_sli_flush_fcp_rings(phba); } @@ -7256,6 +7254,9 @@ lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state) struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + /* Block all SCSI devices' I/Os on the host */ + lpfc_scsi_dev_block(phba); + switch (state) { case pci_channel_io_normal: /* Non-fatal error, prepare for recovery */ From 9795724476860069ce183ead59d0a5958f882037 Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 21 Dec 2009 17:03:15 -0500 Subject: [PATCH 0357/1626] [SCSI] lpfc 8.3.7: Fix discovery failures. Fix discovery failures: - Move all accesses to the fc_flag field inside the host lock. - Restore link state after going through linkdown processing for FCF DEAD event. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_els.c | 2 +- drivers/scsi/lpfc/lpfc_hbadisc.c | 6 ++++++ drivers/scsi/lpfc/lpfc_init.c | 6 +++++- drivers/scsi/lpfc/lpfc_vport.c | 2 ++ 4 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index bb2e43a9e96c..2cc39684ce97 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -4142,8 +4142,8 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, spin_lock_irq(shost->host_lock); if (vport->fc_rscn_flush) { /* Another thread is walking fc_rscn_id_list on this vport */ - spin_unlock_irq(shost->host_lock); vport->fc_flag |= FC_RSCN_DISCOVERY; + spin_unlock_irq(shost->host_lock); /* Send back ACC */ lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL); return 0; diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 1c2737293eb5..2445e399fd60 100755 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1708,7 +1708,9 @@ lpfc_init_vpi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) lpfc_vport_set_state(vport, FC_VPORT_FAILED); return; } + spin_lock_irq(&phba->hbalock); vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI; + spin_unlock_irq(&phba->hbalock); if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) lpfc_initial_fdisc(vport); @@ -2269,8 +2271,10 @@ lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) mb->mbxStatus); break; } + spin_lock_irq(&phba->hbalock); vport->vpi_state &= ~LPFC_VPI_REGISTERED; vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(&phba->hbalock); vport->unreg_vpi_cmpl = VPORT_OK; mempool_free(pmb, phba->mbox_mem_pool); /* @@ -4486,8 +4490,10 @@ lpfc_unregister_unused_fcf(struct lpfc_hba *phba) (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { lpfc_mbx_unreg_vpi(vports[i]); + spin_lock_irq(&phba->hbalock); vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI; vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED; + spin_unlock_irq(&phba->hbalock); } lpfc_destroy_vport_work_array(phba, vports); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 974ea6d85efe..b8eb1b6e5e77 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -3006,6 +3006,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba, struct lpfc_vport *vport; struct lpfc_nodelist *ndlp; struct Scsi_Host *shost; + uint32_t link_state; phba->fc_eventTag = acqe_fcoe->event_tag; phba->fcoe_eventtag = acqe_fcoe->event_tag; @@ -3052,9 +3053,12 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba, break; /* * Currently, driver support only one FCF - so treat this as - * a link down. + * a link down, but save the link state because we don't want + * it to be changed to Link Down unless it is already down. */ + link_state = phba->link_state; lpfc_linkdown(phba); + phba->link_state = link_state; /* Unregister FCF if no devices connected to it */ lpfc_unregister_unused_fcf(phba); break; diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index c3a70c4c9433..e3c7fa642306 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -512,8 +512,10 @@ enable_vport(struct fc_vport *fc_vport) return VPORT_OK; } + spin_lock_irq(&phba->hbalock); vport->load_flag |= FC_LOADING; vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(&phba->hbalock); /* Use the Physical nodes Fabric NDLP to determine if the link is * up and ready to FDISC. From 500af638b3f378e5d1f04dfe5043a377cdc234de Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 21 Dec 2009 17:03:47 -0500 Subject: [PATCH 0358/1626] [SCSI] lpfc 8.3.7: Update Driver version to 8.3.7 Update Driver version to 8.3.7 Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index c7f3aed2aab8..792f72263f1a 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.3.6" +#define LPFC_DRIVER_VERSION "8.3.7" #define LPFC_DRIVER_NAME "lpfc" #define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp" #define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp" From ecbec242961ec66e900b5649ded1e40f5d5edc41 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Mon, 4 Jan 2010 16:29:49 +0100 Subject: [PATCH 0359/1626] ASoC: fixup oops in generic AC97 codec glue Initialize the glue by calling snd_soc_new_ac97_codec() as is done in other ASoC AC97 codecs. Fixes an oops caused by dereferencing uninitialized members in snd_soc_new_pcms(). Run-tested on Au1250. Signed-off-by: Manuel Lauss Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/codecs/ac97.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/soc/codecs/ac97.c b/sound/soc/codecs/ac97.c index 69bd0acc81c8..a1bbe16b7f96 100644 --- a/sound/soc/codecs/ac97.c +++ b/sound/soc/codecs/ac97.c @@ -102,6 +102,12 @@ static int ac97_soc_probe(struct platform_device *pdev) INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); + ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0); + if (ret < 0) { + printk(KERN_ERR "ASoC: failed to init gen ac97 glue\n"); + goto err; + } + /* register pcms */ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); if (ret < 0) From 6432e734c99ed685e3cad72f7dcae4c65008fcab Mon Sep 17 00:00:00 2001 From: John Kacur Date: Sun, 18 Oct 2009 23:49:49 +0200 Subject: [PATCH 0360/1626] sony_pi: Remove the BKL from open and ioctl The BKL is in this function because of the BKL pushdown (see commit f8f2c79d594463427f7114cedb1555110d547d89) It is not needed here because the mutex_lock sonypi_device.lock provides the necessary locking. sonypi_misc_ioctl can be converted to unlocked ioctls since it relies on its own locking (the mutex sonypi_device.lock) and not the bkl Document that llseek is not needed by explictly setting it to no_llseek LKML-Reference: Signed-off-by: John Kacur Acked-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- drivers/char/sonypi.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 0798754a607c..bba727c3807e 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -50,7 +50,6 @@ #include #include #include -#include #include #include @@ -905,14 +904,13 @@ static int sonypi_misc_release(struct inode *inode, struct file *file) static int sonypi_misc_open(struct inode *inode, struct file *file) { - lock_kernel(); mutex_lock(&sonypi_device.lock); /* Flush input queue on first open */ if (!sonypi_device.open_count) kfifo_reset(&sonypi_device.fifo); sonypi_device.open_count++; mutex_unlock(&sonypi_device.lock); - unlock_kernel(); + return 0; } @@ -955,10 +953,10 @@ static unsigned int sonypi_misc_poll(struct file *file, poll_table *wait) return 0; } -static int sonypi_misc_ioctl(struct inode *ip, struct file *fp, +static long sonypi_misc_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) { - int ret = 0; + long ret = 0; void __user *argp = (void __user *)arg; u8 val8; u16 val16; @@ -1074,7 +1072,8 @@ static const struct file_operations sonypi_misc_fops = { .open = sonypi_misc_open, .release = sonypi_misc_release, .fasync = sonypi_misc_fasync, - .ioctl = sonypi_misc_ioctl, + .unlocked_ioctl = sonypi_misc_ioctl, + .llseek = no_llseek, }; static struct miscdevice sonypi_misc_device = { From 5d9d6e44ce15d072d22c10fe670679c77fa2b31d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Jan 2010 16:18:27 +0000 Subject: [PATCH 0361/1626] i2o: propogate the BKL down into the ioctl method Nobody seems to want to own I2O patches so sending this one directly. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/message/i2o/i2o_config.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c index efba7021948a..3d5f40cd69df 100644 --- a/drivers/message/i2o/i2o_config.c +++ b/drivers/message/i2o/i2o_config.c @@ -40,8 +40,7 @@ #define SG_TABLESIZE 30 -static int i2o_cfg_ioctl(struct inode *, struct file *, unsigned int, - unsigned long); +static long i2o_cfg_ioctl(struct file *, unsigned int, unsigned long); static spinlock_t i2o_config_lock; @@ -751,7 +750,7 @@ static long i2o_cfg_compat_ioctl(struct file *file, unsigned cmd, lock_kernel(); switch (cmd) { case I2OGETIOPS: - ret = i2o_cfg_ioctl(NULL, file, cmd, arg); + ret = i2o_cfg_ioctl(file, cmd, arg); break; case I2OPASSTHRU32: ret = i2o_cfg_passthru32(file, cmd, arg); @@ -984,11 +983,11 @@ out: /* * IOCTL Handler */ -static int i2o_cfg_ioctl(struct inode *inode, struct file *fp, unsigned int cmd, - unsigned long arg) +static long i2o_cfg_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) { int ret; + lock_kernel(); switch (cmd) { case I2OGETIOPS: ret = i2o_cfg_getiops(arg); @@ -1044,7 +1043,7 @@ static int i2o_cfg_ioctl(struct inode *inode, struct file *fp, unsigned int cmd, osm_debug("unknown ioctl called!\n"); ret = -EINVAL; } - + unlock_kernel(); return ret; } @@ -1118,7 +1117,7 @@ static int cfg_release(struct inode *inode, struct file *file) static const struct file_operations config_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .ioctl = i2o_cfg_ioctl, + .unlocked_ioctl = i2o_cfg_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = i2o_cfg_compat_ioctl, #endif From 3e8d95d95eaf4b332f6e1862ffbaa80c24780767 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Jan 2010 16:19:55 +0000 Subject: [PATCH 0362/1626] tosh: Use non bkl ioctl We wrap the smm calls and other bits with the BKL push down as a precaution but they can probably go Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/toshiba.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c index 663cd15d7c78..f8bc79f6de34 100644 --- a/drivers/char/toshiba.c +++ b/drivers/char/toshiba.c @@ -68,7 +68,7 @@ #include #include #include - +#include #include #define TOSH_MINOR_DEV 181 @@ -88,13 +88,13 @@ static int tosh_date; static int tosh_sci; static int tosh_fan; -static int tosh_ioctl(struct inode *, struct file *, unsigned int, +static long tosh_ioctl(struct file *, unsigned int, unsigned long); static const struct file_operations tosh_fops = { .owner = THIS_MODULE, - .ioctl = tosh_ioctl, + .unlocked_ioctl = tosh_ioctl, }; static struct miscdevice tosh_device = { @@ -252,8 +252,7 @@ int tosh_smm(SMMRegisters *regs) EXPORT_SYMBOL(tosh_smm); -static int tosh_ioctl(struct inode *ip, struct file *fp, unsigned int cmd, - unsigned long arg) +static long tosh_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) { SMMRegisters regs; SMMRegisters __user *argp = (SMMRegisters __user *)arg; @@ -275,13 +274,16 @@ static int tosh_ioctl(struct inode *ip, struct file *fp, unsigned int cmd, return -EINVAL; /* do we need to emulate the fan ? */ + lock_kernel(); if (tosh_fan==1) { if (((ax==0xf300) || (ax==0xf400)) && (bx==0x0004)) { err = tosh_emulate_fan(®s); + unlock_kernel(); break; } } err = tosh_smm(®s); + unlock_kernel(); break; default: return -EINVAL; From 3e27249c84beed1c79d767b350e52ad038db9053 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 4 Jan 2010 19:26:14 +1030 Subject: [PATCH 0363/1626] lguest: fix bug in setting guest GDT entry We kill the guest, but then we blatt random stuff. Reported-by: Dan Carpenter Signed-off-by: Rusty Russell Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- drivers/lguest/segments.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c index 951c57b0a7e0..ede46581351a 100644 --- a/drivers/lguest/segments.c +++ b/drivers/lguest/segments.c @@ -179,8 +179,10 @@ void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi) * We assume the Guest has the same number of GDT entries as the * Host, otherwise we'd have to dynamically allocate the Guest GDT. */ - if (num >= ARRAY_SIZE(cpu->arch.gdt)) + if (num >= ARRAY_SIZE(cpu->arch.gdt)) { kill_guest(cpu, "too many gdt entries %i", num); + return; + } /* Set it up, then fix it. */ cpu->arch.gdt[num].a = lo; From 846f99749ab68bbc7f75c74fec305de675b1a1bf Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 2 Jan 2010 13:37:12 -0800 Subject: [PATCH 0364/1626] sysfs: Add lockdep annotations for the sysfs active reference Holding locks over device_del -> kobject_del -> sysfs_deactivate can cause deadlocks if those same locks are grabbed in sysfs show or store methods. The I model s_active count + completion as a sleeping read/write lock. I describe to lockdep sysfs_get_active as a read_trylock, sysfs_put_active as a read_unlock, and sysfs_deactivate as a write_lock and write_unlock pair. This seems to capture the essence for purposes of finding deadlocks, and in my testing gives finds real issues and ignores non-issues. This brings us back to holding locks over kobject_del is a problem that ideally we should find a way of addressing, but at least lockdep can tell us about the problems instead of requiring developers to debug rare strange system deadlocks, that happen when sysfs files are removed while being written to. Signed-off-by: Eric W. Biederman Acked-by: Tejun Heo Signed-off-by: Linus Torvalds --- fs/sysfs/dir.c | 14 ++++++++++++-- fs/sysfs/sysfs.h | 15 +++++++++++++++ 2 files changed, 27 insertions(+), 2 deletions(-) diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c index f05f2303a8b8..699f371b9f12 100644 --- a/fs/sysfs/dir.c +++ b/fs/sysfs/dir.c @@ -106,8 +106,10 @@ static struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd) return NULL; t = atomic_cmpxchg(&sd->s_active, v, v + 1); - if (likely(t == v)) + if (likely(t == v)) { + rwsem_acquire_read(&sd->dep_map, 0, 1, _RET_IP_); return sd; + } if (t < 0) return NULL; @@ -130,6 +132,7 @@ static void sysfs_put_active(struct sysfs_dirent *sd) if (unlikely(!sd)) return; + rwsem_release(&sd->dep_map, 1, _RET_IP_); v = atomic_dec_return(&sd->s_active); if (likely(v != SD_DEACTIVATED_BIAS)) return; @@ -194,15 +197,21 @@ static void sysfs_deactivate(struct sysfs_dirent *sd) BUG_ON(sd->s_sibling || !(sd->s_flags & SYSFS_FLAG_REMOVED)); sd->s_sibling = (void *)&wait; + rwsem_acquire(&sd->dep_map, 0, 0, _RET_IP_); /* atomic_add_return() is a mb(), put_active() will always see * the updated sd->s_sibling. */ v = atomic_add_return(SD_DEACTIVATED_BIAS, &sd->s_active); - if (v != SD_DEACTIVATED_BIAS) + if (v != SD_DEACTIVATED_BIAS) { + lock_contended(&sd->dep_map, _RET_IP_); wait_for_completion(&wait); + } sd->s_sibling = NULL; + + lock_acquired(&sd->dep_map, _RET_IP_); + rwsem_release(&sd->dep_map, 1, _RET_IP_); } static int sysfs_alloc_ino(ino_t *pino) @@ -345,6 +354,7 @@ struct sysfs_dirent *sysfs_new_dirent(const char *name, umode_t mode, int type) atomic_set(&sd->s_count, 1); atomic_set(&sd->s_active, 0); + sysfs_dirent_init_lockdep(sd); sd->s_name = name; sd->s_mode = mode; diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h index ca52e7b9d8f8..cdd9377a6e06 100644 --- a/fs/sysfs/sysfs.h +++ b/fs/sysfs/sysfs.h @@ -8,6 +8,7 @@ * This file is released under the GPLv2. */ +#include #include struct sysfs_open_dirent; @@ -50,6 +51,9 @@ struct sysfs_inode_attrs { struct sysfs_dirent { atomic_t s_count; atomic_t s_active; +#ifdef CONFIG_DEBUG_LOCK_ALLOC + struct lockdep_map dep_map; +#endif struct sysfs_dirent *s_parent; struct sysfs_dirent *s_sibling; const char *s_name; @@ -84,6 +88,17 @@ static inline unsigned int sysfs_type(struct sysfs_dirent *sd) return sd->s_flags & SYSFS_TYPE_MASK; } +#ifdef CONFIG_DEBUG_LOCK_ALLOC +#define sysfs_dirent_init_lockdep(sd) \ +do { \ + static struct lock_class_key __key; \ + \ + lockdep_init_map(&sd->dep_map, "s_active", &__key, 0); \ +} while(0) +#else +#define sysfs_dirent_init_lockdep(sd) do {} while(0) +#endif + /* * Context structure to be used while adding/removing nodes. */ From 4ef250114f6672dd36f9b961a71d229642517645 Mon Sep 17 00:00:00 2001 From: Dominik Geyer Date: Tue, 29 Dec 2009 08:27:57 +0100 Subject: [PATCH 0365/1626] ath9k: Fix Kconfig depends for ATH9K_DEBUGFS Add missing DEBUG_FS dependency for ATH9K_DEBUGFS in ath9k's Kconfig. Signed-off-by: Dominik D. Geyer Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 03a1106ad725..5774cea23a3b 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -25,7 +25,7 @@ config ATH9K config ATH9K_DEBUGFS bool "Atheros ath9k debugging" - depends on ATH9K + depends on ATH9K && DEBUG_FS ---help--- Say Y, if you need access to ath9k's statistics for interrupts, rate control, etc. From 13bda1225072f26603d3aeefc1f14c18b2ab29cd Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 29 Dec 2009 22:57:28 +0800 Subject: [PATCH 0366/1626] ath9k: fix ito64 The unit of sizeof() is byte instead of bit, so fix it. The patch can fix debug output of some dma_addr_t variables. Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index e2cef2ff5d8f..1597a42731ed 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -33,11 +33,11 @@ struct ath_node; /* Macro to expand scalars to 64-bit objects */ -#define ito64(x) (sizeof(x) == 8) ? \ +#define ito64(x) (sizeof(x) == 1) ? \ (((unsigned long long int)(x)) & (0xff)) : \ - (sizeof(x) == 16) ? \ + (sizeof(x) == 2) ? \ (((unsigned long long int)(x)) & 0xffff) : \ - ((sizeof(x) == 32) ? \ + ((sizeof(x) == 4) ? \ (((unsigned long long int)(x)) & 0xffffffff) : \ (unsigned long long int)(x)) From 90852f7aed0f90d443efd7e0f9b82d8ac8186848 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 2 Jan 2010 10:31:42 +0100 Subject: [PATCH 0367/1626] mwl8k: fix configure_filter() memory leak on error If there was an error acquiring the firmware lock in mwl8k_configure_filter(), we would end up leaking the multicast command packet prepared by mwl8k_prepare_multicast(). Signed-off-by: Lennert Buytenhek Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 59d49159cf2a..59f92105b0c2 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -3157,8 +3157,10 @@ static void mwl8k_configure_filter(struct ieee80211_hw *hw, /* Clear unsupported feature flags */ *total_flags &= FIF_ALLMULTI | FIF_BCN_PRBRESP_PROMISC; - if (mwl8k_fw_lock(hw)) + if (mwl8k_fw_lock(hw)) { + kfree(cmd); return; + } if (priv->sniffer_enabled) { mwl8k_enable_sniffer(hw, 0); From 8a9ac160e844c7ce8074f6aa531feefb4acdee7c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 3 Jan 2010 11:19:35 +0200 Subject: [PATCH 0368/1626] iwl: off by one bug tid is used as an array offset. agg = &priv->stations[sta_id].tid[tid].agg; iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index); It should be limitted to MAX_TID_COUNT - 1; struct iwl_tid_data tid[MAX_TID_COUNT]; regards, dan carpenter Signed-off-by: Dan Carpenter CC: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 484c5fdf7c2a..761aab127e7c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -1961,7 +1961,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, struct ieee80211_tx_info *info; struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; u32 status = le32_to_cpu(tx_resp->u.status); - int tid = MAX_TID_COUNT; + int tid = MAX_TID_COUNT - 1; int sta_id; int freed; u8 *qc = NULL; From 7de3c5dc0ac89b847b00f25d16976c158dc38e4c Mon Sep 17 00:00:00 2001 From: Benoit Papillault Date: Sun, 3 Jan 2010 10:20:01 +0100 Subject: [PATCH 0369/1626] zd1211rw: Fix multicast filtering. If multicast parameter (as returned by zd_op_prepare_multicast) has changed, no bit in changed_flags is set. To handle this situation, we do not return if changed_flags is 0. If we do so, we will have some issue with IPv6 which uses multicast for link layer address resolution. Signed-off-by: Benoit Papillault Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_mac.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index cc648efb8ede..9d9b263733e6 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -987,12 +987,13 @@ static void zd_op_configure_filter(struct ieee80211_hw *hw, changed_flags &= SUPPORTED_FIF_FLAGS; *new_flags &= SUPPORTED_FIF_FLAGS; - /* changed_flags is always populated but this driver - * doesn't support all FIF flags so its possible we don't - * need to do anything */ - if (!changed_flags) - return; - + /* + * If multicast parameter (as returned by zd_op_prepare_multicast) + * has changed, no bit in changed_flags is set. To handle this + * situation, we do not return if changed_flags is 0. If we do so, + * we will have some issue with IPv6 which uses multicast for link + * layer address resolution. + */ if (*new_flags & (FIF_PROMISC_IN_BSS | FIF_ALLMULTI)) zd_mc_add_all(&hash); From 359207c687cc8f4f9845c8dadd0d6dabad44e584 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 4 Jan 2010 10:40:39 -0500 Subject: [PATCH 0370/1626] ath5k: Fix eeprom checksum check for custom sized eeproms Commit 8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5 enabled EEPROM checksum checks to avoid bogus bug reports but failed to address updating the code to consider devices with custom EEPROM sizes. Devices with custom sized EEPROMs have the upper limit size stuffed in the EEPROM. Use this as the upper limit instead of the static default size. In case of a checksum error also provide back the max size and whether or not this was the default size or a custom one. If the EEPROM is busted we add a failsafe check to ensure we don't loop forever or try to read bogus areas of hardware. This closes bug 14874 http://bugzilla.kernel.org/show_bug.cgi?id=14874 Cc: stable@kernel.org Cc: David Quan Cc: Stephen Beahm Reported-by: Joshua Covington Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/eeprom.c | 32 ++++++++++++++++++++++--- drivers/net/wireless/ath/ath5k/eeprom.h | 8 +++++++ 2 files changed, 37 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 791885262602..9a96550006ad 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -97,7 +97,7 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah) struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; int ret; u16 val; - u32 cksum, offset; + u32 cksum, offset, eep_max = AR5K_EEPROM_INFO_MAX; /* * Read values from EEPROM and store them in the capability structure @@ -116,12 +116,38 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah) * Validate the checksum of the EEPROM date. There are some * devices with invalid EEPROMs. */ - for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) { + AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_UPPER, val); + if (val) { + eep_max = (val & AR5K_EEPROM_SIZE_UPPER_MASK) << + AR5K_EEPROM_SIZE_ENDLOC_SHIFT; + AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_LOWER, val); + eep_max = (eep_max | val) - AR5K_EEPROM_INFO_BASE; + + /* + * Fail safe check to prevent stupid loops due + * to busted EEPROMs. XXX: This value is likely too + * big still, waiting on a better value. + */ + if (eep_max > (3 * AR5K_EEPROM_INFO_MAX)) { + ATH5K_ERR(ah->ah_sc, "Invalid max custom EEPROM size: " + "%d (0x%04x) max expected: %d (0x%04x)\n", + eep_max, eep_max, + 3 * AR5K_EEPROM_INFO_MAX, + 3 * AR5K_EEPROM_INFO_MAX); + return -EIO; + } + } + + for (cksum = 0, offset = 0; offset < eep_max; offset++) { AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val); cksum ^= val; } if (cksum != AR5K_EEPROM_INFO_CKSUM) { - ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum); + ATH5K_ERR(ah->ah_sc, "Invalid EEPROM " + "checksum: 0x%04x eep_max: 0x%04x (%s)\n", + cksum, eep_max, + eep_max == AR5K_EEPROM_INFO_MAX ? + "default size" : "custom size"); return -EIO; } diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index 0123f3521a0b..473a483bb9c3 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -37,6 +37,14 @@ #define AR5K_EEPROM_RFKILL_POLARITY_S 1 #define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ + +/* FLASH(EEPROM) Defines for AR531X chips */ +#define AR5K_EEPROM_SIZE_LOWER 0x1b /* size info -- lower */ +#define AR5K_EEPROM_SIZE_UPPER 0x1c /* size info -- upper */ +#define AR5K_EEPROM_SIZE_UPPER_MASK 0xfff0 +#define AR5K_EEPROM_SIZE_UPPER_SHIFT 4 +#define AR5K_EEPROM_SIZE_ENDLOC_SHIFT 12 + #define AR5K_EEPROM_CHECKSUM 0x00c0 /* EEPROM checksum */ #define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ #define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE) From e12822e1d3fface0d9e1095c5177e10141bd6bd6 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 4 Jan 2010 11:37:39 -0500 Subject: [PATCH 0371/1626] cfg80211: fix syntax error on user regulatory hints This fixes a syntax error when setting up the user regulatory hint. This change yields the same exact binary object though so it ends up just being a syntax typo fix, fortunately. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/wireless/reg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index baa898add287..7a0754c92df4 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1690,7 +1690,7 @@ int regulatory_hint_user(const char *alpha2) request->wiphy_idx = WIPHY_IDX_STALE; request->alpha2[0] = alpha2[0]; request->alpha2[1] = alpha2[1]; - request->initiator = NL80211_REGDOM_SET_BY_USER, + request->initiator = NL80211_REGDOM_SET_BY_USER; queue_regulatory_request(request); From 9dad0fd5a73d4048dff18069733c0b515f68df74 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 22 Dec 2009 15:40:39 -0800 Subject: [PATCH 0372/1626] x86: Fix size for ex trampoline with 32bit fix for error that is introduced by | x86: Use find_e820() instead of hard coded trampoline address it should end with PAGE_SIZE + PAGE_SIZE Signed-off-by: Yinghai Lu LKML-Reference: <1261525263-13763-2-git-send-email-yinghai@kernel.org> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/e820.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 05ed7ab2ca48..a1a7876cadcb 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -733,13 +733,13 @@ struct early_res { }; static struct early_res early_res[MAX_EARLY_RES] __initdata = { { 0, PAGE_SIZE, "BIOS data page", 1 }, /* BIOS data page */ -#ifdef CONFIG_X86_32 +#if defined(CONFIG_X86_32) && defined(CONFIG_X86_TRAMPOLINE) /* * But first pinch a few for the stack/trampoline stuff * FIXME: Don't need the extra page at 4K, but need to fix * trampoline before removing it. (see the GDT stuff) */ - { PAGE_SIZE, PAGE_SIZE, "EX TRAMPOLINE", 1 }, + { PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE", 1 }, #endif {} From a557aae29cf5916295c234d4b10ba3f8f29b8a96 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 22 Dec 2009 15:40:40 -0800 Subject: [PATCH 0373/1626] x86/pci: Intel ioh bus num reg accessing fix It is above 0x100 (PCI-Express extended register space), so if mmconf is not enable, we can't access it. [ hpa: changed the bound from 0x200 to 0x120, which is the tight bound. ] Reported-by: Jens Axboe Signed-off-by: Yinghai Lu LKML-Reference: <1261525263-13763-3-git-send-email-yinghai@kernel.org> Signed-off-by: H. Peter Anvin --- arch/x86/pci/intel_bus.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/pci/intel_bus.c b/arch/x86/pci/intel_bus.c index b7a55dc55d13..f81a2fa8fe25 100644 --- a/arch/x86/pci/intel_bus.c +++ b/arch/x86/pci/intel_bus.c @@ -49,6 +49,10 @@ static void __devinit pci_root_bus_res(struct pci_dev *dev) u64 mmioh_base, mmioh_end; int bus_base, bus_end; + /* some sys doesn't get mmconf enabled */ + if (dev->cfg_size < 0x120) + return; + if (pci_root_num >= PCI_ROOT_NR) { printk(KERN_DEBUG "intel_bus.c: PCI_ROOT_NR is too small\n"); return; From d3af9dd04f8795dc2761ecfa56632e4d0df0dae2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Jan 2010 14:36:40 -0800 Subject: [PATCH 0374/1626] cxgb3i: Fix flags test. As noticed by Stephen Rothwell. Signed-off-by: David S. Miller --- drivers/scsi/cxgb3i/cxgb3i_offload.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c index 4b8a5133d69d..7449d465bc17 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_offload.c +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c @@ -1442,7 +1442,7 @@ static int is_cxgb3_dev(struct net_device *dev) struct cxgb3i_sdev_data *cdata; struct net_device *ndev = dev; - if (dev->priv_flags && IFF_802_1Q_VLAN) + if (dev->priv_flags & IFF_802_1Q_VLAN) ndev = vlan_dev_real_dev(dev); write_lock(&cdata_rwlock); From 6be954d1f91b81ca85c74792b13654069278c577 Mon Sep 17 00:00:00 2001 From: David John Date: Mon, 4 Jan 2010 20:28:57 +0530 Subject: [PATCH 0375/1626] PCI: Check the node argument passed to cpumask_of_node Commit e0cd516 "PCI: derive nearby CPUs from device's instead of bus' NUMA information" causes an null pointer dereference when reading from the sysfs attributes local_cpu* on Intel machines with no ACPI NUMA proximity info, since dev->numa_node gets set to -1 for all PCI devices, which then gets passed to cpumask_of_node. Add a check to prevent this. Signed-off-by: David John Signed-off-by: Jesse Barnes --- drivers/pci/pci-sysfs.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index c5df94e86678..807224ec8351 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -75,7 +75,8 @@ static ssize_t local_cpus_show(struct device *dev, int len; #ifdef CONFIG_NUMA - mask = cpumask_of_node(dev_to_node(dev)); + mask = (dev_to_node(dev) == -1) ? cpu_online_mask : + cpumask_of_node(dev_to_node(dev)); #else mask = cpumask_of_pcibus(to_pci_dev(dev)->bus); #endif @@ -93,7 +94,8 @@ static ssize_t local_cpulist_show(struct device *dev, int len; #ifdef CONFIG_NUMA - mask = cpumask_of_node(dev_to_node(dev)); + mask = (dev_to_node(dev) == -1) ? cpu_online_mask : + cpumask_of_node(dev_to_node(dev)); #else mask = cpumask_of_pcibus(to_pci_dev(dev)->bus); #endif From c7c17c2779075e675cb3c7fe2ecde67e226771fb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Jan 2010 15:31:10 -0800 Subject: [PATCH 0376/1626] bbc_envctrl: Clean up properly if kthread_run() fails. In bbc_envctrl_init() we have to unlink the fan and temp instances from the lists because our caller is going to free up the 'bp' object if we return an error. We can't rely upon bbc_envctrl_cleanup() to do this work for us in this case. Reported-by: Patrick Finnegan Signed-off-by: David S. Miller --- drivers/sbus/char/bbc_envctrl.c | 64 +++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 26 deletions(-) diff --git a/drivers/sbus/char/bbc_envctrl.c b/drivers/sbus/char/bbc_envctrl.c index 7c815d3327f7..28d86f9df83c 100644 --- a/drivers/sbus/char/bbc_envctrl.c +++ b/drivers/sbus/char/bbc_envctrl.c @@ -522,6 +522,40 @@ static void attach_one_fan(struct bbc_i2c_bus *bp, struct of_device *op, set_fan_speeds(fp); } +static void destroy_one_temp(struct bbc_cpu_temperature *tp) +{ + bbc_i2c_detach(tp->client); + kfree(tp); +} + +static void destroy_all_temps(struct bbc_i2c_bus *bp) +{ + struct bbc_cpu_temperature *tp, *tpos; + + list_for_each_entry_safe(tp, tpos, &bp->temps, bp_list) { + list_del(&tp->bp_list); + list_del(&tp->glob_list); + destroy_one_temp(tp); + } +} + +static void destroy_one_fan(struct bbc_fan_control *fp) +{ + bbc_i2c_detach(fp->client); + kfree(fp); +} + +static void destroy_all_fans(struct bbc_i2c_bus *bp) +{ + struct bbc_fan_control *fp, *fpos; + + list_for_each_entry_safe(fp, fpos, &bp->fans, bp_list) { + list_del(&fp->bp_list); + list_del(&fp->glob_list); + destroy_one_fan(fp); + } +} + int bbc_envctrl_init(struct bbc_i2c_bus *bp) { struct of_device *op; @@ -541,6 +575,8 @@ int bbc_envctrl_init(struct bbc_i2c_bus *bp) int err = PTR_ERR(kenvctrld_task); kenvctrld_task = NULL; + destroy_all_temps(bp); + destroy_all_fans(bp); return err; } } @@ -548,35 +584,11 @@ int bbc_envctrl_init(struct bbc_i2c_bus *bp) return 0; } -static void destroy_one_temp(struct bbc_cpu_temperature *tp) -{ - bbc_i2c_detach(tp->client); - kfree(tp); -} - -static void destroy_one_fan(struct bbc_fan_control *fp) -{ - bbc_i2c_detach(fp->client); - kfree(fp); -} - void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp) { - struct bbc_cpu_temperature *tp, *tpos; - struct bbc_fan_control *fp, *fpos; - if (kenvctrld_task) kthread_stop(kenvctrld_task); - list_for_each_entry_safe(tp, tpos, &bp->temps, bp_list) { - list_del(&tp->bp_list); - list_del(&tp->glob_list); - destroy_one_temp(tp); - } - - list_for_each_entry_safe(fp, fpos, &bp->fans, bp_list) { - list_del(&fp->bp_list); - list_del(&fp->glob_list); - destroy_one_fan(fp); - } + destroy_all_temps(bp); + destroy_all_fans(bp); } From 8183e2b38480672a1f61d416812ac078ce94b67b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Jan 2010 15:37:04 -0800 Subject: [PATCH 0377/1626] sparc64: Fix NMI programming when perf events are active. If perf events are active, we should not reset the %pcr to PCR_PIC_PRIV. That perf events code does the management. Signed-off-by: David S. Miller --- arch/sparc/kernel/nmi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c index f30f4a1ead23..d242a7340541 100644 --- a/arch/sparc/kernel/nmi.c +++ b/arch/sparc/kernel/nmi.c @@ -96,7 +96,6 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs) int cpu = smp_processor_id(); clear_softint(1 << irq); - pcr_ops->write(PCR_PIC_PRIV); local_cpu_data().__nmi_count++; @@ -105,6 +104,8 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs) if (notify_die(DIE_NMI, "nmi", regs, 0, pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP) touched = 1; + else + pcr_ops->write(PCR_PIC_PRIV); sum = kstat_irqs_cpu(0, cpu); if (__get_cpu_var(nmi_touch)) { From 1ae861e652b5457e7fa98ccbc55abea1e207916e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 31 Dec 2009 12:15:54 +0100 Subject: [PATCH 0378/1626] PCI/PM: Use per-device D3 delays It turns out that some PCI devices require extra delays when changing power state from D3 to D0 (and the other way around). Although this is against the PCI specification, we can handle it quite easily by allowing drivers to define arbitrary D3 delays for devices known to require extra time for switching power states. Introduce additional field d3_delay in struct pci_dev and use it to store the value of the device's D0->D3 delay, in miliseconds. Make the PCI PM core code use the per-device d3_delay unless pci_pm_d3_delay is greater (in which case the latter is used). [This also allows the driver to specify d3_delay shorter than the 10 ms required by the PCI standard if the device is known to be able to handle that.] Make the sky2 driver set d3_delay to 150 for devices handled by it. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14730 which is a listed regression from 2.6.30. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/net/sky2.c | 1 + drivers/pci/pci.c | 19 +++++++++++++++---- include/linux/pci.h | 1 + 3 files changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 1c01b96c9611..2d28d58200d0 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4684,6 +4684,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, INIT_WORK(&hw->restart_work, sky2_restart); pci_set_drvdata(pdev, hw); + pdev->d3_delay = 150; return 0; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 0906599ebfde..315fea47e784 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -29,7 +29,17 @@ const char *pci_power_names[] = { }; EXPORT_SYMBOL_GPL(pci_power_names); -unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT; +unsigned int pci_pm_d3_delay; + +static void pci_dev_d3_sleep(struct pci_dev *dev) +{ + unsigned int delay = dev->d3_delay; + + if (delay < pci_pm_d3_delay) + delay = pci_pm_d3_delay; + + msleep(delay); +} #ifdef CONFIG_PCI_DOMAINS int pci_domains_supported = 1; @@ -522,7 +532,7 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) /* Mandatory power management transition delays */ /* see PCI PM 1.1 5.6.1 table 18 */ if (state == PCI_D3hot || dev->current_state == PCI_D3hot) - msleep(pci_pm_d3_delay); + pci_dev_d3_sleep(dev); else if (state == PCI_D2 || dev->current_state == PCI_D2) udelay(PCI_PM_D2_DELAY); @@ -1409,6 +1419,7 @@ void pci_pm_init(struct pci_dev *dev) } dev->pm_cap = pm; + dev->d3_delay = PCI_PM_D3_WAIT; dev->d1_support = false; dev->d2_support = false; @@ -2247,12 +2258,12 @@ static int pci_pm_reset(struct pci_dev *dev, int probe) csr &= ~PCI_PM_CTRL_STATE_MASK; csr |= PCI_D3hot; pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr); - msleep(pci_pm_d3_delay); + pci_dev_d3_sleep(dev); csr &= ~PCI_PM_CTRL_STATE_MASK; csr |= PCI_D0; pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr); - msleep(pci_pm_d3_delay); + pci_dev_d3_sleep(dev); return 0; } diff --git a/include/linux/pci.h b/include/linux/pci.h index 5da0690d9cee..174e5392e51e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -243,6 +243,7 @@ struct pci_dev { unsigned int d2_support:1; /* Low power state D2 is supported */ unsigned int no_d1d2:1; /* Only allow D0 and D3 */ unsigned int wakeup_prepared:1; + unsigned int d3_delay; /* D3->D0 transition time in ms */ #ifdef CONFIG_PCIEASPM struct pcie_link_state *link_state; /* ASPM link state. */ From b49bfd32901625e4adcfee011d2b32a43b4db67d Mon Sep 17 00:00:00 2001 From: "Youquan,Song" Date: Thu, 17 Dec 2009 08:22:48 -0500 Subject: [PATCH 0379/1626] PCIe AER: prevent AER injection if hardware masks error reporting The Correcteable/Uncorrectable Error Mask Registers are used by PCIe AER driver which will controls the reporting of individual errors to PCIe RC via PCIe error messages. If hardware masks special error reporting to RC, the aer_inject driver should not inject aer error. Acked-by: Andi Kleen Signed-off-by: Youquan, Song Acked-by: Ying, Huang Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aer/aer_inject.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index dd7155a037e7..8c30a9544d61 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -321,7 +321,7 @@ static int aer_inject(struct aer_error_inj *einj) unsigned long flags; unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn); int pos_cap_err, rp_pos_cap_err; - u32 sever; + u32 sever, mask; int ret = 0; dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn); @@ -374,6 +374,24 @@ static int aer_inject(struct aer_error_inj *einj) err->header_log2 = einj->header_log2; err->header_log3 = einj->header_log3; + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &mask); + if (einj->cor_status && !(einj->cor_status & ~mask)) { + ret = -EINVAL; + printk(KERN_WARNING "The correctable error(s) is masked " + "by device\n"); + spin_unlock_irqrestore(&inject_lock, flags); + goto out_put; + } + + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK, &mask); + if (einj->uncor_status && !(einj->uncor_status & ~mask)) { + ret = -EINVAL; + printk(KERN_WARNING "The uncorrectable error(s) is masked " + "by device\n"); + spin_unlock_irqrestore(&inject_lock, flags); + goto out_put; + } + rperr = __find_aer_error_by_dev(rpdev); if (!rperr) { rperr = rperr_alloc; From f4b825bde98938f160315d655597bc9731521cae Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 5 Jan 2010 12:48:49 +1030 Subject: [PATCH 0380/1626] Revert "x86: Side-step lguest problem by only building cmpxchg8b_emu for pre-Pentium" This reverts commit ae1b22f6e46c03cede7cea234d0bf2253b4261cf. As Linus said in 982d007a6ee: "There was something really messy about cmpxchg8b and clone CPU's, so if you enable it on other CPUs later, do it carefully." This breaks lguest for those configs, but we can fix that by emulating if we have to. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=14884 Signed-off-by: Rusty Russell LKML-Reference: <201001051248.49700.rusty@rustcorp.com.au> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin --- arch/x86/Kconfig.cpu | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 08e442bc3ab9..f20ddf84a893 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -396,7 +396,7 @@ config X86_TSC config X86_CMPXCHG64 def_bool y - depends on !M386 && !M486 + depends on X86_PAE || X86_64 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MATOM # this should be set for all -march=.. options where the compiler # generates cmov. From 5fe1533fda8ae005541bd418a7a8bc4fa0cda522 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Mon, 4 Jan 2010 22:04:01 +0100 Subject: [PATCH 0381/1626] reiserfs: Fix recursive lock on lchown On chown, reiserfs will call reiserfs_setattr() to change the owner of the given inode, but it may also recursively call reiserfs_setattr() to propagate the owner change to the private xattr files for this inode. Hence, the reiserfs lock may be acquired twice which is not wanted as reiserfs_setattr() calls journal_begin() that is going to try to relax the lock in order to safely acquire the journal mutex. Using reiserfs_write_lock_once() from reiserfs_setattr() solves the problem. This fixes the following warning, that precedes a lockdep report. WARNING: at fs/reiserfs/lock.c:95 reiserfs_lock_check_recursive+0x3f/0x50() Hardware name: MS-7418 Unwanted recursive reiserfs lock! Pid: 4189, comm: fsstress Not tainted 2.6.33-rc2-tip-atom+ #195 Call Trace: [] ? reiserfs_lock_check_recursive+0x3f/0x50 [] ? reiserfs_lock_check_recursive+0x3f/0x50 [] warn_slowpath_common+0x6c/0xc0 [] ? reiserfs_lock_check_recursive+0x3f/0x50 [] warn_slowpath_fmt+0x2b/0x30 [] reiserfs_lock_check_recursive+0x3f/0x50 [] do_journal_begin_r+0x83/0x350 [] journal_begin+0x7d/0x140 [] ? in_group_p+0x2a/0x30 [] ? inode_change_ok+0x91/0x140 [] reiserfs_setattr+0x15d/0x2e0 [] ? dput+0xe3/0x140 [] ? _raw_spin_unlock+0x2c/0x50 [] chown_one_xattr+0xd/0x10 [] reiserfs_for_each_xattr+0x113/0x2c0 [] ? chown_one_xattr+0x0/0x10 [] ? mutex_lock_nested+0x2a9/0x350 [] reiserfs_chown_xattrs+0x1f/0x60 [] ? in_group_p+0x2a/0x30 [] ? inode_change_ok+0x91/0x140 [] reiserfs_setattr+0x126/0x2e0 [] ? reiserfs_getxattr+0x0/0x90 [] ? cap_inode_need_killpriv+0x37/0x50 [] notify_change+0x151/0x330 [] chown_common+0x6f/0x90 [] sys_lchown+0x6d/0x80 [] sysenter_do_call+0x12/0x32 ---[ end trace 7c2b77224c1442fc ]--- Signed-off-by: Frederic Weisbecker Cc: Christian Kujau Cc: Alexander Beregalov Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/inode.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index bd615dfe4ec7..47dbfb18877a 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -3052,13 +3052,14 @@ static ssize_t reiserfs_direct_IO(int rw, struct kiocb *iocb, int reiserfs_setattr(struct dentry *dentry, struct iattr *attr) { struct inode *inode = dentry->d_inode; - int error; unsigned int ia_valid; + int depth; + int error; /* must be turned off for recursive notify_change calls */ ia_valid = attr->ia_valid &= ~(ATTR_KILL_SUID|ATTR_KILL_SGID); - reiserfs_write_lock(inode->i_sb); + depth = reiserfs_write_lock_once(inode->i_sb); if (attr->ia_valid & ATTR_SIZE) { /* version 2 items will be caught by the s_maxbytes check ** done for us in vmtruncate @@ -3149,7 +3150,8 @@ int reiserfs_setattr(struct dentry *dentry, struct iattr *attr) } out: - reiserfs_write_unlock(inode->i_sb); + reiserfs_write_unlock_once(inode->i_sb, depth); + return error; } From 108d3943c021f0b66e860ba98ded40b82b677bd7 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Tue, 5 Jan 2010 00:15:38 +0100 Subject: [PATCH 0382/1626] reiserfs: Relax the lock before truncating pages While truncating a file, reiserfs_setattr() calls inode_setattr() that will truncate the mapping for the given inode, but for that it needs the pages locks. In order to release these, the owners need the reiserfs lock to complete their jobs. But they can't, as we don't release it before calling inode_setattr(). We need to do that to fix the following softlockups: INFO: task flush-8:0:2149 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. flush-8:0 D f51af998 0 2149 2 0x00000000 f51af9ac 00000092 00000002 f51af998 c2803304 00000000 c1894ad0 010f3000 f51af9cc c1462604 c189ef80 f51af974 c1710304 f715b450 f715b5ec c2807c40 00000000 0005bb00 c2803320 c102c55b c1710304 c2807c50 c2803304 00000246 Call Trace: [] ? schedule+0x434/0xb20 [] ? resched_task+0x4b/0x70 [] ? mark_held_locks+0x62/0x80 [] ? mutex_lock_nested+0x1fd/0x350 [] mutex_lock_nested+0x169/0x350 [] ? reiserfs_write_lock+0x2e/0x40 [] reiserfs_write_lock+0x2e/0x40 [] do_journal_end+0xc2/0xe70 [] journal_end+0xb2/0x120 [] ? pathrelse+0x33/0xb0 [] reiserfs_end_persistent_transaction+0x64/0x70 [] reiserfs_get_block+0x12ba/0x15f0 [] ? mark_held_locks+0x62/0x80 [] reiserfs_writepage+0xa74/0xe80 [] ? _raw_spin_unlock_irq+0x27/0x50 [] ? radix_tree_gang_lookup_tag_slot+0x95/0xc0 [] ? find_get_pages_tag+0x127/0x1a0 [] ? mark_held_locks+0x62/0x80 [] ? trace_hardirqs_on_caller+0x124/0x170 [] __writepage+0x10/0x40 [] write_cache_pages+0x16b/0x320 [] ? __writepage+0x0/0x40 [] generic_writepages+0x28/0x40 [] do_writepages+0x35/0x40 [] writeback_single_inode+0xc7/0x330 [] writeback_inodes_wb+0x2c2/0x490 [] wb_writeback+0x106/0x1b0 [] wb_do_writeback+0x106/0x1e0 [] ? wb_do_writeback+0x28/0x1e0 [] bdi_writeback_task+0x3a/0xb0 [] bdi_start_fn+0x63/0xc0 [] ? bdi_start_fn+0x0/0xc0 [] kthread+0x74/0x80 [] ? kthread+0x0/0x80 [] kernel_thread_helper+0x6/0x10 3 locks held by flush-8:0/2149: #0: (&type->s_umount_key#30){+++++.}, at: [] writeback_inodes_wb+0x27f/0x490 #1: (&journal->j_mutex){+.+...}, at: [] do_journal_end+0xba/0xe70 #2: (&REISERFS_SB(s)->lock){+.+.+.}, at: [] reiserfs_write_lock+0x2e/0x40 INFO: task fstest:3813 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. fstest D 00000002 0 3813 3812 0x00000000 f5103c94 00000082 f5103c40 00000002 f5ad5450 00000007 f5103c28 011f3000 00000006 f5ad5450 c10bb005 00000480 c1710304 f5ad5450 f5ad55ec c2907c40 00000001 f5ad5450 f5103c74 00000046 00000002 f5ad5450 00000007 f5103c6c Call Trace: [] ? free_hot_cold_page+0x1d5/0x280 [] io_schedule+0x74/0xc0 [] sync_page+0x35/0x60 [] __wait_on_bit_lock+0x4a/0x90 [] ? sync_page+0x0/0x60 [] __lock_page+0x85/0x90 [] ? wake_bit_function+0x0/0x60 [] truncate_inode_pages_range+0x1e4/0x2d0 [] truncate_inode_pages+0x1f/0x30 [] truncate_pagecache+0x5f/0xa0 [] vmtruncate+0x5a/0x70 [] inode_setattr+0x5d/0x190 [] reiserfs_setattr+0x1f7/0x2f0 [] ? down_write+0x49/0x70 [] notify_change+0x151/0x330 [] do_truncate+0x6d/0xa0 [] do_filp_open+0x9a2/0xcf0 [] ? _raw_spin_unlock+0x2c/0x50 [] ? alloc_fd+0xe0/0x100 [] do_sys_open+0x6d/0x130 [] ? sysenter_exit+0xf/0x16 [] sys_open+0x2e/0x40 [] sysenter_do_call+0x12/0x32 3 locks held by fstest/3813: #0: (&sb->s_type->i_mutex_key#4){+.+.+.}, at: [] do_truncate+0x63/0xa0 #1: (&sb->s_type->i_alloc_sem_key#3){+.+.+.}, at: [] notify_change+0x257/0x330 #2: (&REISERFS_SB(s)->lock){+.+.+.}, at: [] reiserfs_write_lock_once+0x2e/0x50 Signed-off-by: Frederic Weisbecker Cc: Christian Kujau Cc: Alexander Beregalov Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/inode.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 47dbfb18877a..c876341ea738 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -3140,8 +3140,17 @@ int reiserfs_setattr(struct dentry *dentry, struct iattr *attr) journal_end(&th, inode->i_sb, jbegin_count); } } - if (!error) + if (!error) { + /* + * Relax the lock here, as it might truncate the + * inode pages and wait for inode pages locks. + * To release such page lock, the owner needs the + * reiserfs lock + */ + reiserfs_write_unlock_once(inode->i_sb, depth); error = inode_setattr(inode, attr); + depth = reiserfs_write_lock_once(inode->i_sb); + } } if (!error && reiserfs_posixacl(inode->i_sb)) { From 4f3be1b5a98587b86cae05aa5d129dd0b3fff466 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Tue, 5 Jan 2010 02:14:30 +0100 Subject: [PATCH 0383/1626] reiserfs: Relax lock on xattr removing When we remove an xattr, we call lookup_and_delete_xattr() that takes some private xattr inodes mutexes. But we hold the reiserfs lock at this time, which leads to dependency inversions. We can safely call lookup_and_delete_xattr() without the reiserfs lock, where xattr inodes lookups only need the xattr inodes mutexes. Signed-off-by: Frederic Weisbecker Cc: Christian Kujau Cc: Alexander Beregalov Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/xattr.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 75d3706734ec..4899d789ba67 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -451,7 +451,9 @@ static int lookup_and_delete_xattr(struct inode *inode, const char *name) } if (dentry->d_inode) { + reiserfs_write_lock(inode->i_sb); err = xattr_unlink(xadir->d_inode, dentry); + reiserfs_write_unlock(inode->i_sb); update_ctime(inode); } @@ -485,10 +487,14 @@ reiserfs_xattr_set_handle(struct reiserfs_transaction_handle *th, if (get_inode_sd_version(inode) == STAT_DATA_V1) return -EOPNOTSUPP; - if (!buffer) - return lookup_and_delete_xattr(inode, name); - reiserfs_write_unlock(inode->i_sb); + + if (!buffer) { + err = lookup_and_delete_xattr(inode, name); + reiserfs_write_lock(inode->i_sb); + return err; + } + dentry = xattr_lookup(inode, name, flags); if (IS_ERR(dentry)) { reiserfs_write_lock(inode->i_sb); From 89be503021f550575fc896671b569941140b2c2e Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Mon, 21 Dec 2009 16:36:23 +0200 Subject: [PATCH 0384/1626] exofs: fix pnfs_osd re-definitions in pre-pnfs trees Some on disk exofs constants and types are defined in the pnfs_osd_xdr.h file. Since we needed these types before the pnfs-objects code was accepted to mainline we duplicated the minimal needed definitions into an exofs local header. The definitions where conditionally included depending on !CONFIG_PNFS defined. So if PNFS was present in the tree definitions are taken from there and if not they are defined locally. That was all good but, the CONFIG_PNFS is planed to be included upstream before the pnfs-objects is also included. (The first pnfs batch might be pnfs-files only) So condition exofs local definitions on the absence of pnfs_osd_xdr.h inclusion (__PNFS_OSD_XDR_H__ not defined). User code must make sure that in future pnfs_osd_xdr.h will be included before fs/exofs/pnfs.h, which happens to be so in current code. Once pnfs-objects hits mainline, exofs's local header will be removed. Signed-off-by: Boaz Harrosh --- fs/exofs/pnfs.h | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/fs/exofs/pnfs.h b/fs/exofs/pnfs.h index 423033addd1f..c52e9888b8ab 100644 --- a/fs/exofs/pnfs.h +++ b/fs/exofs/pnfs.h @@ -15,13 +15,7 @@ #ifndef __EXOFS_PNFS_H__ #define __EXOFS_PNFS_H__ -#if defined(CONFIG_PNFS) - - -/* FIXME: move this file to: linux/exportfs/pnfs_osd_xdr.h */ -#include "../nfs/objlayout/pnfs_osd_xdr.h" - -#else /* defined(CONFIG_PNFS) */ +#if ! defined(__PNFS_OSD_XDR_H__) enum pnfs_iomode { IOMODE_READ = 1, @@ -46,6 +40,6 @@ struct pnfs_osd_data_map { u32 odm_raid_algorithm; }; -#endif /* else defined(CONFIG_PNFS) */ +#endif /* ! defined(__PNFS_OSD_XDR_H__) */ #endif /* __EXOFS_PNFS_H__ */ From efd124b999fb4d426b30675f1684521af0872789 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 27 Dec 2009 17:01:42 +0200 Subject: [PATCH 0385/1626] exofs: simple_write_end does not mark_inode_dirty exofs uses simple_write_end() for it's .write_end handler. But it is not enough because simple_write_end() does not call mark_inode_dirty() when it extends i_size. So even if we do call mark_inode_dirty at beginning of write out, with a very long IO and a saturated system we might get the .write_inode() called while still extend-writing to file and miss out on the last i_size updates. So override .write_end, call simple_write_end(), and afterwords if i_size was changed call mark_inode_dirty(). It stands to logic that since simple_write_end() was the one extending i_size it should also call mark_inode_dirty(). But it looks like all users of simple_write_end() are memory-bound pseudo filesystems, who could careless about mark_inode_dirty(). I might submit a warning-comment patch to simple_write_end() in future. CC: Stable Signed-off-by: Boaz Harrosh --- fs/exofs/inode.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c index 698a8636d39c..2afbcebeda71 100644 --- a/fs/exofs/inode.c +++ b/fs/exofs/inode.c @@ -738,13 +738,28 @@ static int exofs_write_begin_export(struct file *file, fsdata); } +static int exofs_write_end(struct file *file, struct address_space *mapping, + loff_t pos, unsigned len, unsigned copied, + struct page *page, void *fsdata) +{ + struct inode *inode = mapping->host; + /* According to comment in simple_write_end i_mutex is held */ + loff_t i_size = inode->i_size; + int ret; + + ret = simple_write_end(file, mapping,pos, len, copied, page, fsdata); + if (i_size != inode->i_size) + mark_inode_dirty(inode); + return ret; +} + const struct address_space_operations exofs_aops = { .readpage = exofs_readpage, .readpages = exofs_readpages, .writepage = exofs_writepage, .writepages = exofs_writepages, .write_begin = exofs_write_begin_export, - .write_end = simple_write_end, + .write_end = exofs_write_end, }; /****************************************************************************** From e04ed38d4e0cd32141f723560efcc8252b0241e2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Jan 2010 23:16:03 -0800 Subject: [PATCH 0386/1626] sparc64: Fix Niagara2 perf event handling. For chips like Niagara2 that have true overflow indications in the %pcr (which we don't actually need and don't use) the interrupt signal persists until the overflow bits are cleared by an explicit %pcr write. Signed-off-by: David S. Miller --- arch/sparc/kernel/perf_event.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index fa5936e1c3b9..198fb4e79ba2 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -986,6 +986,17 @@ static int __kprobes perf_event_nmi_handler(struct notifier_block *self, data.addr = 0; cpuc = &__get_cpu_var(cpu_hw_events); + + /* If the PMU has the TOE IRQ enable bits, we need to do a + * dummy write to the %pcr to clear the overflow bits and thus + * the interrupt. + * + * Do this before we peek at the counters to determine + * overflow so we don't lose any events. + */ + if (sparc_pmu->irq_bit) + pcr_ops->write(cpuc->pcr); + for (idx = 0; idx < MAX_HWEVENTS; idx++) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; From 9f0727f5f41d21eb3da67e50965d1f30e054795f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 4 Jan 2010 18:24:50 +0000 Subject: [PATCH 0387/1626] mx31ads: Allow enable/disable of switchable supplies They will be automatically powered off at startup so users will need to enable them for use. Signed-off-by: Mark Brown Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mx31ads.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 3e7bafa2ddbb..609d402cadba 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -302,6 +302,7 @@ static struct regulator_init_data ldo1_data = { .min_uV = 2800000, .max_uV = 2800000, .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, .apply_uV = 1, }, }; @@ -322,6 +323,7 @@ static struct regulator_init_data ldo2_data = { .min_uV = 3300000, .max_uV = 3300000, .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, .apply_uV = 1, }, .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers), From bd02acdbb28be99ed87ec11c3ef61a5eec4e2dd7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 5 Jan 2010 16:05:15 +0000 Subject: [PATCH 0388/1626] mx31ads: Provide a name for EXPIO interrupt chip This makes it a bit more obvious in genirq diagnostics that they aren't handled by the i.MX interrupt controller. Signed-off-by: Mark Brown Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mx31ads.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 609d402cadba..e2054563027f 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -173,6 +173,7 @@ static void expio_unmask_irq(u32 irq) } static struct irq_chip expio_irq_chip = { + .name = "EXPIO(CPLD)", .ack = expio_ack_irq, .mask = expio_mask_irq, .unmask = expio_unmask_irq, From 3d661ac187e72af71d3bb7d48a46012180a6fc46 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 5 Jan 2010 16:05:16 +0000 Subject: [PATCH 0389/1626] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module The WM8350 core won't actually use the range yet, but it will in future and the platform data to configure it is there now. Signed-off-by: Mark Brown Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mx31ads.c | 1 + arch/arm/plat-mxc/include/mach/irqs.h | 5 +++++ 2 files changed, 6 insertions(+) diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index e2054563027f..938c549767dc 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -462,6 +462,7 @@ static int mx31_wm8350_init(struct wm8350 *wm8350) static struct wm8350_platform_data __initdata mx31_wm8350_pdata = { .init = mx31_wm8350_init, + .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES, }; #endif diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index ead9d592168d..0cb347645db4 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -37,7 +37,12 @@ * within sensible limits. */ #define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS) + +#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 +#define MXC_BOARD_IRQS 80 +#else #define MXC_BOARD_IRQS 16 +#endif #define MXC_IPU_IRQ_START (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS) From 070f1f178c4377c09f72e414513aeacd8403f6d6 Mon Sep 17 00:00:00 2001 From: Bahadir Balban Date: Fri, 25 Dec 2009 14:25:48 +0100 Subject: [PATCH 0390/1626] ARM: 5858/1: Remove unused vma_vm_flags macro from v7wbi_flush_user_tlb_range Signed-off-by: Bahadir Balban Signed-off-by: Russell King --- arch/arm/mm/tlb-v7.S | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index a26a605b73bd..0cb1848bd876 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -40,7 +40,6 @@ ENTRY(v7wbi_flush_user_tlb_range) asid r3, r3 @ mask ASID orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA mov r1, r1, lsl #PAGE_SHIFT - vma_vm_flags r2, r2 @ get vma->vm_flags 1: #ifdef CONFIG_SMP mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable) From 1368c51c501978e5c4148322b7c77d4f49549557 Mon Sep 17 00:00:00 2001 From: Li Jie Date: Thu, 31 Dec 2009 15:57:53 +0100 Subject: [PATCH 0391/1626] ARM: 5863/1: fix bugs of clock source of NUC900 This patch fix following bugs: 1. typo error, CLOCK_EVT_MODE_PERIODIC -> CLOCK_EVT_FEAT_PERIODIC 2. TCSR register of timer1 missed PRESCALE 3. timer1 should be enabled before register it to clock source. Signed-off-by: lijie Acked-by: Wan ZongShun Signed-off-by: Russell King --- arch/arm/mach-w90x900/time.c | 64 +++++++++++++++++++++--------------- 1 file changed, 37 insertions(+), 27 deletions(-) diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c index 4128af870b41..b80f769bc135 100644 --- a/arch/arm/mach-w90x900/time.c +++ b/arch/arm/mach-w90x900/time.c @@ -42,7 +42,10 @@ #define TICKS_PER_SEC 100 #define PRESCALE 0x63 /* Divider = prescale + 1 */ -unsigned int timer0_load; +#define TDR_SHIFT 24 +#define TDR_MASK ((1 << TDR_SHIFT) - 1) + +static unsigned int timer0_load; static void nuc900_clockevent_setmode(enum clock_event_mode mode, struct clock_event_device *clk) @@ -88,7 +91,7 @@ static int nuc900_clockevent_setnextevent(unsigned long evt, static struct clock_event_device nuc900_clockevent_device = { .name = "nuc900-timer0", .shift = 32, - .features = CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = nuc900_clockevent_setmode, .set_next_event = nuc900_clockevent_setnextevent, .rating = 300, @@ -112,8 +115,23 @@ static struct irqaction nuc900_timer0_irq = { .handler = nuc900_timer0_interrupt, }; -static void __init nuc900_clockevents_init(unsigned int rate) +static void __init nuc900_clockevents_init(void) { + unsigned int rate; + struct clk *clk = clk_get(NULL, "timer0"); + + BUG_ON(IS_ERR(clk)); + + __raw_writel(0x00, REG_TCSR0); + + clk_enable(clk); + rate = clk_get_rate(clk) / (PRESCALE + 1); + + timer0_load = (rate / TICKS_PER_SEC); + + __raw_writel(RESETINT, REG_TISR); + setup_irq(IRQ_TIMER0, &nuc900_timer0_irq); + nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC, nuc900_clockevent_device.shift); nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff, @@ -127,26 +145,35 @@ static void __init nuc900_clockevents_init(unsigned int rate) static cycle_t nuc900_get_cycles(struct clocksource *cs) { - return ~__raw_readl(REG_TDR1); + return (~__raw_readl(REG_TDR1)) & TDR_MASK; } static struct clocksource clocksource_nuc900 = { .name = "nuc900-timer1", .rating = 200, .read = nuc900_get_cycles, - .mask = CLOCKSOURCE_MASK(32), - .shift = 20, + .mask = CLOCKSOURCE_MASK(TDR_SHIFT), + .shift = 10, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void __init nuc900_clocksource_init(unsigned int rate) +static void __init nuc900_clocksource_init(void) { unsigned int val; + unsigned int rate; + struct clk *clk = clk_get(NULL, "timer1"); + + BUG_ON(IS_ERR(clk)); + + __raw_writel(0x00, REG_TCSR1); + + clk_enable(clk); + rate = clk_get_rate(clk) / (PRESCALE + 1); __raw_writel(0xffffffff, REG_TICR1); val = __raw_readl(REG_TCSR1); - val |= (COUNTEN | PERIOD); + val |= (COUNTEN | PERIOD | PRESCALE); __raw_writel(val, REG_TCSR1); clocksource_nuc900.mult = @@ -156,25 +183,8 @@ static void __init nuc900_clocksource_init(unsigned int rate) static void __init nuc900_timer_init(void) { - struct clk *ck_ext = clk_get(NULL, "ext"); - unsigned int rate; - - BUG_ON(IS_ERR(ck_ext)); - - rate = clk_get_rate(ck_ext); - clk_put(ck_ext); - rate = rate / (PRESCALE + 0x01); - - /* set a known state */ - __raw_writel(0x00, REG_TCSR0); - __raw_writel(0x00, REG_TCSR1); - __raw_writel(RESETINT, REG_TISR); - timer0_load = (rate / TICKS_PER_SEC); - - setup_irq(IRQ_TIMER0, &nuc900_timer0_irq); - - nuc900_clocksource_init(rate); - nuc900_clockevents_init(rate); + nuc900_clocksource_init(); + nuc900_clockevents_init(); } struct sys_timer nuc900_timer = { From 58b2e0a2dd8e460d3b7d7f8ec5d3042253b9e08a Mon Sep 17 00:00:00 2001 From: Li Jie Date: Thu, 31 Dec 2009 15:50:02 +0100 Subject: [PATCH 0392/1626] ARM: 5864/1: Implement arch_reset() in NUC900 Implement arch_reset(), reboot from shell become possible. Signed-off-by: lijie Acked-by: Wan ZongShun Signed-off-by: Russell King --- arch/arm/mach-w90x900/include/mach/system.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h index 940640066857..ce228bdc66dd 100644 --- a/arch/arm/mach-w90x900/include/mach/system.h +++ b/arch/arm/mach-w90x900/include/mach/system.h @@ -15,7 +15,15 @@ * */ +#include #include +#include +#include + +#define WTCR (TMR_BA + 0x1C) +#define WTCLK (1 << 10) +#define WTE (1 << 7) +#define WTRE (1 << 1) static void arch_idle(void) { @@ -23,6 +31,11 @@ static void arch_idle(void) static void arch_reset(char mode, const char *cmd) { - cpu_reset(0); + if (mode == 's') { + /* Jump into ROM at address 0 */ + cpu_reset(0); + } else { + __raw_writel(WTE | WTRE | WTCLK, WTCR); + } } From dc2f9c5a13de4f9fd63f49f54add40b2924f66cd Mon Sep 17 00:00:00 2001 From: Li Jie Date: Thu, 31 Dec 2009 16:03:16 +0100 Subject: [PATCH 0393/1626] ARM: 5865/1: nuc900 ethernet driver needs mii nuc900 ethernet driver uses mii_xx_xx serials api, so mii module should be selected. Signed-off-by: lijie Acked-by: Wan ZongShun Signed-off-by: Russell King --- drivers/net/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig index c37ee9e6b67b..39e1c0d39476 100644 --- a/drivers/net/arm/Kconfig +++ b/drivers/net/arm/Kconfig @@ -68,6 +68,7 @@ config W90P910_ETH tristate "Nuvoton w90p910 Ethernet support" depends on ARM && ARCH_W90X900 select PHYLIB + select MII help Say Y here if you want to use built-in Ethernet ports on w90p910 processor. From b59a52f12e483b79e7d32da7ec30dcf3b2e0210b Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Wed, 30 Dec 2009 11:36:29 +0100 Subject: [PATCH 0394/1626] rt2x00: use correct headroom for transmission Use rt2x00dev->ops->extra_tx_headroom, not rt2x00dev->hw->extra_tx_headroom in the tx code, as the later may include other headroom not to be used in the chipset driver. Signed-off-by: Pavel Roskin Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 239afc7a9c0b..9915a09141ef 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -104,7 +104,7 @@ void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) * is also mapped to the DMA so it can be used for transfering * additional descriptor information to the hardware. */ - skb_push(skb, rt2x00dev->hw->extra_tx_headroom); + skb_push(skb, rt2x00dev->ops->extra_tx_headroom); skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE); @@ -112,7 +112,7 @@ void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) /* * Restore data pointer to original location again. */ - skb_pull(skb, rt2x00dev->hw->extra_tx_headroom); + skb_pull(skb, rt2x00dev->ops->extra_tx_headroom); skbdesc->flags |= SKBDESC_DMA_MAPPED_TX; } @@ -134,7 +134,7 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) * by the driver, but it was actually mapped to DMA. */ dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, - skb->len + rt2x00dev->hw->extra_tx_headroom, + skb->len + rt2x00dev->ops->extra_tx_headroom, DMA_TO_DEVICE); skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX; } From 301a8234ea81938f0f083ae4e274d9c9296f3c86 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Wed, 30 Dec 2009 11:36:33 +0100 Subject: [PATCH 0395/1626] rt2x00: Fix LED configuration setting for rt2800. rt2800_blink_set uses an illegal value to set the LED_CFG_G_LED_MODE field of the LED_CFG register. This field is only 2 bits large, so should be initialized with value that fits. Use default value from the vendor driver. Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 27bf887f1453..9deae41cb784 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -340,7 +340,7 @@ static int rt2800_blink_set(struct led_classdev *led_cdev, rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off); rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12); + rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 3); rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); rt2800_register_write(led->rt2x00dev, LED_CFG, reg); From cf0277e714a0db302a8f80e1b85fd61c32cf00b3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Jan 2010 18:00:58 +0100 Subject: [PATCH 0396/1626] mac80211: fix skb buffering issue Since I removed the master netdev, we've been keeping internal queues only, and even before that we never told the networking stack above the virtual interfaces about congestion. This means that packets are queued in mac80211 and the upper layers never know, possibly leading to memory exhaustion and other problems. This patch makes all interfaces multiqueue and uses ndo_select_queue to put the packets into queues per AC. Additionally, when the driver stops a queue, we now stop all corresponding queues for the virtual interfaces as well. The injection case will use VO by default for non-data frames, and BE for data frames, but downgrade any data frames according to ACM. It needs to be fleshed out in the future to allow chosing the queue/AC in radiotap. Reported-by: Lennert Buytenhek Signed-off-by: Johannes Berg Cc: stable@kernel.org [2.6.32] Signed-off-by: John W. Linville --- net/mac80211/iface.c | 39 +++++++++++++++++- net/mac80211/rx.c | 4 +- net/mac80211/tx.c | 5 ++- net/mac80211/util.c | 12 ++++++ net/mac80211/wme.c | 94 ++++++++++++++++++++++++++++++++------------ net/mac80211/wme.h | 8 +++- 6 files changed, 131 insertions(+), 31 deletions(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 80c16f6e2af6..c261cdb359eb 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -15,12 +15,14 @@ #include #include #include +#include #include "ieee80211_i.h" #include "sta_info.h" #include "debugfs_netdev.h" #include "mesh.h" #include "led.h" #include "driver-ops.h" +#include "wme.h" /** * DOC: Interface list locking @@ -644,6 +646,12 @@ static void ieee80211_teardown_sdata(struct net_device *dev) WARN_ON(flushed); } +static u16 ieee80211_netdev_select_queue(struct net_device *dev, + struct sk_buff *skb) +{ + return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb); +} + static const struct net_device_ops ieee80211_dataif_ops = { .ndo_open = ieee80211_open, .ndo_stop = ieee80211_stop, @@ -652,8 +660,34 @@ static const struct net_device_ops ieee80211_dataif_ops = { .ndo_set_multicast_list = ieee80211_set_multicast_list, .ndo_change_mtu = ieee80211_change_mtu, .ndo_set_mac_address = eth_mac_addr, + .ndo_select_queue = ieee80211_netdev_select_queue, }; +static u16 ieee80211_monitor_select_queue(struct net_device *dev, + struct sk_buff *skb) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; + struct ieee80211_hdr *hdr; + struct ieee80211_radiotap_header *rtap = (void *)skb->data; + + if (local->hw.queues < 4) + return 0; + + if (skb->len < 4 || + skb->len < rtap->it_len + 2 /* frame control */) + return 0; /* doesn't matter, frame will be dropped */ + + hdr = (void *)((u8 *)skb->data + rtap->it_len); + + if (!ieee80211_is_data(hdr->frame_control)) { + skb->priority = 7; + return ieee802_1d_to_ac[skb->priority]; + } + + return ieee80211_downgrade_queue(local, skb); +} + static const struct net_device_ops ieee80211_monitorif_ops = { .ndo_open = ieee80211_open, .ndo_stop = ieee80211_stop, @@ -662,6 +696,7 @@ static const struct net_device_ops ieee80211_monitorif_ops = { .ndo_set_multicast_list = ieee80211_set_multicast_list, .ndo_change_mtu = ieee80211_change_mtu, .ndo_set_mac_address = eth_mac_addr, + .ndo_select_queue = ieee80211_monitor_select_queue, }; static void ieee80211_if_setup(struct net_device *dev) @@ -768,8 +803,8 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name, ASSERT_RTNL(); - ndev = alloc_netdev(sizeof(*sdata) + local->hw.vif_data_size, - name, ieee80211_if_setup); + ndev = alloc_netdev_mq(sizeof(*sdata) + local->hw.vif_data_size, + name, ieee80211_if_setup, local->hw.queues); if (!ndev) return -ENOMEM; dev_net_set(ndev, wiphy_net(local->hw.wiphy)); diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 9f2807aeaf52..54296999834b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1746,7 +1746,9 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) memset(info, 0, sizeof(*info)); info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING; info->control.vif = &rx->sdata->vif; - ieee80211_select_queue(local, fwd_skb); + skb_set_queue_mapping(skb, + ieee80211_select_queue(rx->sdata, fwd_skb)); + ieee80211_set_qos_hdr(local, skb); if (is_multicast_ether_addr(fwd_hdr->addr1)) IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh, fwded_mcast); diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 27ceaefd7bc8..ac210b586702 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1512,7 +1512,7 @@ static void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, return; } - ieee80211_select_queue(local, skb); + ieee80211_set_qos_hdr(local, skb); ieee80211_tx(sdata, skb, false); rcu_read_unlock(); } @@ -2291,6 +2291,9 @@ void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) skb_set_network_header(skb, 0); skb_set_transport_header(skb, 0); + /* send all internal mgmt frames on VO */ + skb_set_queue_mapping(skb, 0); + /* * The other path calling ieee80211_xmit is from the tasklet, * and while we can handle concurrent transmissions locking diff --git a/net/mac80211/util.c b/net/mac80211/util.c index dc76267e436e..3848140313f5 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -269,6 +269,7 @@ static void __ieee80211_wake_queue(struct ieee80211_hw *hw, int queue, enum queue_stop_reason reason) { struct ieee80211_local *local = hw_to_local(hw); + struct ieee80211_sub_if_data *sdata; if (WARN_ON(queue >= hw->queues)) return; @@ -281,6 +282,11 @@ static void __ieee80211_wake_queue(struct ieee80211_hw *hw, int queue, if (!skb_queue_empty(&local->pending[queue])) tasklet_schedule(&local->tx_pending_tasklet); + + rcu_read_lock(); + list_for_each_entry_rcu(sdata, &local->interfaces, list) + netif_tx_wake_queue(netdev_get_tx_queue(sdata->dev, queue)); + rcu_read_unlock(); } void ieee80211_wake_queue_by_reason(struct ieee80211_hw *hw, int queue, @@ -305,11 +311,17 @@ static void __ieee80211_stop_queue(struct ieee80211_hw *hw, int queue, enum queue_stop_reason reason) { struct ieee80211_local *local = hw_to_local(hw); + struct ieee80211_sub_if_data *sdata; if (WARN_ON(queue >= hw->queues)) return; __set_bit(reason, &local->queue_stop_reasons[queue]); + + rcu_read_lock(); + list_for_each_entry_rcu(sdata, &local->interfaces, list) + netif_tx_stop_queue(netdev_get_tx_queue(sdata->dev, queue)); + rcu_read_unlock(); } void ieee80211_stop_queue_by_reason(struct ieee80211_hw *hw, int queue, diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index b19b7696f3a2..34e6d02da779 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -44,22 +44,69 @@ static int wme_downgrade_ac(struct sk_buff *skb) } -/* Indicate which queue to use. */ -static u16 classify80211(struct ieee80211_local *local, struct sk_buff *skb) +/* Indicate which queue to use. */ +u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_local *local = sdata->local; + struct sta_info *sta = NULL; + u32 sta_flags = 0; + const u8 *ra = NULL; + bool qos = false; - if (!ieee80211_is_data(hdr->frame_control)) { - /* management frames go on AC_VO queue, but are sent - * without QoS control fields */ - return 0; + if (local->hw.queues < 4 || skb->len < 6) { + skb->priority = 0; /* required for correct WPA/11i MIC */ + return min_t(u16, local->hw.queues - 1, + ieee802_1d_to_ac[skb->priority]); } - if (0 /* injected */) { - /* use AC from radiotap */ + rcu_read_lock(); + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP_VLAN: + rcu_read_lock(); + sta = rcu_dereference(sdata->u.vlan.sta); + if (sta) + sta_flags = get_sta_flags(sta); + rcu_read_unlock(); + if (sta) + break; + case NL80211_IFTYPE_AP: + ra = skb->data; + break; + case NL80211_IFTYPE_WDS: + ra = sdata->u.wds.remote_addr; + break; +#ifdef CONFIG_MAC80211_MESH + case NL80211_IFTYPE_MESH_POINT: + /* + * XXX: This is clearly broken ... but already was before, + * because ieee80211_fill_mesh_addresses() would clear A1 + * except for multicast addresses. + */ + break; +#endif + case NL80211_IFTYPE_STATION: + ra = sdata->u.mgd.bssid; + break; + case NL80211_IFTYPE_ADHOC: + ra = skb->data; + break; + default: + break; } - if (!ieee80211_is_data_qos(hdr->frame_control)) { + if (!sta && ra && !is_multicast_ether_addr(ra)) { + sta = sta_info_get(sdata, ra); + if (sta) + sta_flags = get_sta_flags(sta); + } + + if (sta_flags & WLAN_STA_WME) + qos = true; + + rcu_read_unlock(); + + if (!qos) { skb->priority = 0; /* required for correct WPA/11i MIC */ return ieee802_1d_to_ac[skb->priority]; } @@ -68,6 +115,12 @@ static u16 classify80211(struct ieee80211_local *local, struct sk_buff *skb) * data frame has */ skb->priority = cfg80211_classify8021d(skb); + return ieee80211_downgrade_queue(local, skb); +} + +u16 ieee80211_downgrade_queue(struct ieee80211_local *local, + struct sk_buff *skb) +{ /* in case we are a client verify acm is not set for this ac */ while (unlikely(local->wmm_acm & BIT(skb->priority))) { if (wme_downgrade_ac(skb)) { @@ -85,24 +138,17 @@ static u16 classify80211(struct ieee80211_local *local, struct sk_buff *skb) return ieee802_1d_to_ac[skb->priority]; } -void ieee80211_select_queue(struct ieee80211_local *local, struct sk_buff *skb) +void ieee80211_set_qos_hdr(struct ieee80211_local *local, struct sk_buff *skb) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - u16 queue; - u8 tid; + struct ieee80211_hdr *hdr = (void *)skb->data; - queue = classify80211(local, skb); - if (unlikely(queue >= local->hw.queues)) - queue = local->hw.queues - 1; - - /* - * Now we know the 1d priority, fill in the QoS header if - * there is one (and we haven't done this before). - */ + /* Fill in the QoS header if there is one. */ if (ieee80211_is_data_qos(hdr->frame_control)) { u8 *p = ieee80211_get_qos_ctl(hdr); - u8 ack_policy = 0; + u8 ack_policy = 0, tid; + tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; + if (unlikely(local->wifi_wme_noack_test)) ack_policy |= QOS_CONTROL_ACK_POLICY_NOACK << QOS_CONTROL_ACK_POLICY_SHIFT; @@ -110,6 +156,4 @@ void ieee80211_select_queue(struct ieee80211_local *local, struct sk_buff *skb) *p++ = ack_policy | tid; *p = 0; } - - skb_set_queue_mapping(skb, queue); } diff --git a/net/mac80211/wme.h b/net/mac80211/wme.h index d4fd87ca5118..6053b1c9feee 100644 --- a/net/mac80211/wme.h +++ b/net/mac80211/wme.h @@ -20,7 +20,11 @@ extern const int ieee802_1d_to_ac[8]; -void ieee80211_select_queue(struct ieee80211_local *local, - struct sk_buff *skb); +u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb); +void ieee80211_set_qos_hdr(struct ieee80211_local *local, struct sk_buff *skb); +u16 ieee80211_downgrade_queue(struct ieee80211_local *local, + struct sk_buff *skb); + #endif /* _WME_H */ From 7a4a77b7771164d61ce702a588067d1e1d66db7c Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Wed, 30 Dec 2009 11:36:30 +0100 Subject: [PATCH 0397/1626] rt2x00: Properly request tx headroom for alignment operations. Current rt2x00 drivers may result in a "ieee80211_tx_status: headroom too small" error message when a frame needs to be properly aligned before transmitting it. This is because the space needed to ensure proper alignment isn't requested from mac80211. Fix this by adding sufficient amount of alignment space to the amount of headroom requested for TX frames. Reported-by: David Ellingsworth Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 6 ++++++ drivers/net/wireless/rt2x00/rt2x00dev.c | 12 +++++++++++- 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 4d841c07c970..dcfc8c25d1a7 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -112,6 +112,12 @@ #define ALIGN_SIZE(__skb, __header) \ ( ((unsigned long)((__skb)->data + (__header))) & 3 ) +/* + * Constants for extra TX headroom for alignment purposes. + */ +#define RT2X00_ALIGN_SIZE 4 /* Only whole frame needs alignment */ +#define RT2X00_L2PAD_SIZE 8 /* Both header & payload need alignment */ + /* * Standard timing and size defines. * These values should follow the ieee80211 specifications. diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 06c43ca39bf8..265e66dba552 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -686,7 +686,17 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialize extra TX headroom required. */ - rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom; + rt2x00dev->hw->extra_tx_headroom = + max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM, + rt2x00dev->ops->extra_tx_headroom); + + /* + * Take TX headroom required for alignment into account. + */ + if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags)) + rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE; + else if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags)) + rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE; /* * Register HW. From 409d02ef6d74f5e91f5ea4c587b2ee1375f106fc Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 5 Jan 2010 14:19:11 +0100 Subject: [PATCH 0398/1626] x86: copy_from_user() should not return -EFAULT Callers of copy_from_user() expect it to return the number of bytes it could not copy. In no case it is supposed to return -EFAULT. In case of a detected buffer overflow just return the requested length. In addition one could think of a memset that would clear the size of the target object. [ hpa: code is not in .32 so not needed for -stable ] Signed-off-by: Heiko Carstens Acked-by: Arjan van de Ven LKML-Reference: <20100105131911.GC5480@osiris.boeblingen.de.ibm.com> Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/uaccess_32.h | 5 ++--- arch/x86/include/asm/uaccess_64.h | 5 ++--- 2 files changed, 4 insertions(+), 6 deletions(-) diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h index 0c9825e97f36..088d09fb1615 100644 --- a/arch/x86/include/asm/uaccess_32.h +++ b/arch/x86/include/asm/uaccess_32.h @@ -205,14 +205,13 @@ static inline unsigned long __must_check copy_from_user(void *to, unsigned long n) { int sz = __compiletime_object_size(to); - int ret = -EFAULT; if (likely(sz == -1 || sz >= n)) - ret = _copy_from_user(to, from, n); + n = _copy_from_user(to, from, n); else copy_from_user_overflow(); - return ret; + return n; } long __must_check strncpy_from_user(char *dst, const char __user *src, diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h index 46324c6a4f6e..535e421498f6 100644 --- a/arch/x86/include/asm/uaccess_64.h +++ b/arch/x86/include/asm/uaccess_64.h @@ -30,16 +30,15 @@ static inline unsigned long __must_check copy_from_user(void *to, unsigned long n) { int sz = __compiletime_object_size(to); - int ret = -EFAULT; might_fault(); if (likely(sz == -1 || sz >= n)) - ret = _copy_from_user(to, from, n); + n = _copy_from_user(to, from, n); #ifdef CONFIG_DEBUG_VM else WARN(1, "Buffer overflow detected!\n"); #endif - return ret; + return n; } static __always_inline __must_check From db677ffa5f5a4f15b9dad4d132b3477b80766d82 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 5 Jan 2010 12:48:49 +1030 Subject: [PATCH 0399/1626] Revert "x86: Side-step lguest problem by only building cmpxchg8b_emu for pre-Pentium" This reverts commit ae1b22f6e46c03cede7cea234d0bf2253b4261cf. As Linus said in 982d007a6ee: "There was something really messy about cmpxchg8b and clone CPU's, so if you enable it on other CPUs later, do it carefully." This breaks lguest for those configs, but we can fix that by emulating if we have to. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=14884 Signed-off-by: Rusty Russell Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- arch/x86/Kconfig.cpu | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 08e442bc3ab9..f20ddf84a893 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -396,7 +396,7 @@ config X86_TSC config X86_CMPXCHG64 def_bool y - depends on !M386 && !M486 + depends on X86_PAE || X86_64 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MATOM # this should be set for all -march=.. options where the compiler # generates cmov. From 74d2e4f8d79ae0c4b6ec027958d5b18058662eea Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 5 Jan 2010 16:02:46 -0800 Subject: [PATCH 0400/1626] Linux 2.6.33-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index c628a5cfe422..12310947156e 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 33 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* From b9597a1c6fa6cbc938f14ab6a7fe09047b3a346b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 4 Jan 2010 19:12:02 -0500 Subject: [PATCH 0401/1626] drm/radeon/kms: fallback to default connector table if necessary for combios Some early combios radeon cards don't have a connector table or dac table in the bios, if they do not, fallback to the default tables. Should fix kernel bug 14963. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 91d72b70abc9..1fb2f029d7e8 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -329,8 +329,11 @@ static bool radeon_setup_enc_conn(struct drm_device *dev) ret = radeon_get_atom_connector_info_from_object_table(dev); else ret = radeon_get_atom_connector_info_from_supported_devices_table(dev); - } else + } else { ret = radeon_get_legacy_connector_info_from_bios(dev); + if (ret == false) + ret = radeon_get_legacy_connector_info_from_table(dev); + } } else { if (!ASIC_IS_AVIVO(rdev)) ret = radeon_get_legacy_connector_info_from_table(dev); From 246263ccc31e4ba2886cca17000bf09ea683eac5 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 29 Dec 2009 12:09:17 -0500 Subject: [PATCH 0402/1626] drm/radeon/kms: add primary dac adj values table Look up primary dac adj values from the table if there is no bios or bios dac table to reference. The lookup table may need to be adjusted for certain families. Should fix kernel bug 14945. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 50 ++++++++++++++++++++----- 1 file changed, 41 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index fd94dbca33ac..58f342659cc7 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -595,6 +595,34 @@ bool radeon_combios_get_clock_info(struct drm_device *dev) return false; } +static const uint32_t default_primarydac_adj[CHIP_LAST] = { + 0x00000808, /* r100 */ + 0x00000808, /* rv100 */ + 0x00000808, /* rs100 */ + 0x00000808, /* rv200 */ + 0x00000808, /* rs200 */ + 0x00000808, /* r200 */ + 0x00000808, /* rv250 */ + 0x00000000, /* rs300 */ + 0x00000808, /* rv280 */ + 0x00000808, /* r300 */ + 0x00000808, /* r350 */ + 0x00000808, /* rv350 */ + 0x00000808, /* rv380 */ + 0x00000808, /* r420 */ + 0x00000808, /* r423 */ + 0x00000808, /* rv410 */ + 0x00000000, /* rs400 */ + 0x00000000, /* rs480 */ +}; + +static void radeon_legacy_get_primary_dac_info_from_table(struct radeon_device *rdev, + struct radeon_encoder_primary_dac *p_dac) +{ + p_dac->ps2_pdac_adj = default_primarydac_adj[rdev->family]; + return; +} + struct radeon_encoder_primary_dac *radeon_combios_get_primary_dac_info(struct radeon_encoder *encoder) @@ -604,20 +632,20 @@ struct radeon_encoder_primary_dac *radeon_combios_get_primary_dac_info(struct uint16_t dac_info; uint8_t rev, bg, dac; struct radeon_encoder_primary_dac *p_dac = NULL; + int found = 0; + + p_dac = kzalloc(sizeof(struct radeon_encoder_primary_dac), + GFP_KERNEL); + + if (!p_dac) + return NULL; if (rdev->bios == NULL) - return NULL; + goto out; /* check CRT table */ dac_info = combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE); if (dac_info) { - p_dac = - kzalloc(sizeof(struct radeon_encoder_primary_dac), - GFP_KERNEL); - - if (!p_dac) - return NULL; - rev = RBIOS8(dac_info) & 0x3; if (rev < 2) { bg = RBIOS8(dac_info + 0x2) & 0xf; @@ -628,9 +656,13 @@ struct radeon_encoder_primary_dac *radeon_combios_get_primary_dac_info(struct dac = RBIOS8(dac_info + 0x3) & 0xf; p_dac->ps2_pdac_adj = (bg << 8) | (dac); } - + found = 1; } +out: + if (!found) /* fallback to defaults */ + radeon_legacy_get_primary_dac_info_from_table(rdev, p_dac); + return p_dac; } From 1d3d51b6d2d6fb51c6c30a8c7ed0fd939f6100bf Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 28 Dec 2009 13:45:23 -0500 Subject: [PATCH 0403/1626] drm/radeon/kms: add missing breaks in i2c and ss lookups Should fix fdo bug 25741 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 321044bef71c..41dd8ebff219 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -114,6 +114,7 @@ static inline struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_dev i2c.i2c_id = gpio->sucI2cId.ucAccess; i2c.valid = true; + break; } } @@ -1026,6 +1027,7 @@ static struct radeon_atom_ss *radeon_atombios_get_ss_info(struct ss->delay = ss_info->asSS_Info[i].ucSS_Delay; ss->range = ss_info->asSS_Info[i].ucSS_Range; ss->refdiv = ss_info->asSS_Info[i].ucRecommendedRef_Div; + break; } } } From 6df1c176994fab993f3112e3e4145a7d2bae64d0 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 5 Jan 2010 20:41:48 -0800 Subject: [PATCH 0404/1626] sparc: copy_from_user() should not return -EFAULT From: Heiko Carstens Callers of copy_from_user() expect it to return the number of bytes it could not copy. In no case it is supposed to return -EFAULT. In case of a detected buffer overflow just return the requested length. In addition one could think of a memset that would clear the size of the target object. Signed-off-by: Heiko Carstens Signed-off-by: David S. Miller --- arch/sparc/include/asm/uaccess_32.h | 2 +- arch/sparc/include/asm/uaccess_64.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/include/asm/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h index 489d2ba92bcb..25f1d10155e8 100644 --- a/arch/sparc/include/asm/uaccess_32.h +++ b/arch/sparc/include/asm/uaccess_32.h @@ -274,7 +274,7 @@ static inline unsigned long copy_from_user(void *to, const void __user *from, un if (unlikely(sz != -1 && sz < n)) { copy_from_user_overflow(); - return -EFAULT; + return n; } if (n && __access_ok((unsigned long) from, n)) diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h index dbc141660994..2406788bfe5f 100644 --- a/arch/sparc/include/asm/uaccess_64.h +++ b/arch/sparc/include/asm/uaccess_64.h @@ -221,8 +221,8 @@ extern unsigned long copy_from_user_fixup(void *to, const void __user *from, static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long size) { - unsigned long ret = (unsigned long) -EFAULT; int sz = __compiletime_object_size(to); + unsigned long ret = size; if (likely(sz == -1 || sz >= size)) { ret = ___copy_from_user(to, from, size); From 59b015133cd0034f5904a76969d73476380aac46 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Tue, 5 Jan 2010 17:56:02 -0800 Subject: [PATCH 0405/1626] Input: serio - fix potential deadlock when unbinding drivers sysfs_remove_group() waits for sysfs attributes to be removed, therefore we do not need to worry about driver-specific attributes being accessed after driver has been detached from the device. In fact, attempts to take serio->drv_mutex in attribute methods may lead to the following deadlock: sysfs_read_file() fill_read_buffer() sysfs_get_active_two() psmouse_attr_show_helper() serio_pin_driver() serio_disconnect_driver() mutex_lock(&serio->drv_mutex); <--------> mutex_lock(&serio_drv_mutex); psmouse_disconnect() sysfs_remove_group(... psmouse_attr_group); .... sysfs_deactivate(); wait_for_completion(); Fix this by removing calls to serio_[un]pin_driver() and functions themselves and using driver-private mutexes to serialize access to attribute's set() methods that may change device state. Signed-off-by: Eric W. Biederman Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 59 +++++++++++++----------------- drivers/input/mouse/psmouse-base.c | 32 ++-------------- include/linux/serio.h | 19 ---------- 3 files changed, 28 insertions(+), 82 deletions(-) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 1f5e2ce327d6..1cf32a7814d0 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -225,8 +225,10 @@ struct atkbd { struct delayed_work event_work; unsigned long event_jiffies; - struct mutex event_mutex; unsigned long event_mask; + + /* Serializes reconnect(), attr->set() and event work */ + struct mutex mutex; }; /* @@ -577,7 +579,7 @@ static void atkbd_event_work(struct work_struct *work) { struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work); - mutex_lock(&atkbd->event_mutex); + mutex_lock(&atkbd->mutex); if (!atkbd->enabled) { /* @@ -596,7 +598,7 @@ static void atkbd_event_work(struct work_struct *work) atkbd_set_repeat_rate(atkbd); } - mutex_unlock(&atkbd->event_mutex); + mutex_unlock(&atkbd->mutex); } /* @@ -612,7 +614,7 @@ static void atkbd_schedule_event_work(struct atkbd *atkbd, int event_bit) atkbd->event_jiffies = jiffies; set_bit(event_bit, &atkbd->event_mask); - wmb(); + mb(); schedule_delayed_work(&atkbd->event_work, delay); } @@ -849,12 +851,13 @@ static void atkbd_disconnect(struct serio *serio) { struct atkbd *atkbd = serio_get_drvdata(serio); + sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group); + atkbd_disable(atkbd); /* make sure we don't have a command in flight */ cancel_delayed_work_sync(&atkbd->event_work); - sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group); input_unregister_device(atkbd->dev); serio_close(serio); serio_set_drvdata(serio, NULL); @@ -1087,7 +1090,7 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv) atkbd->dev = dev; ps2_init(&atkbd->ps2dev, serio); INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work); - mutex_init(&atkbd->event_mutex); + mutex_init(&atkbd->mutex); switch (serio->id.type) { @@ -1160,19 +1163,23 @@ static int atkbd_reconnect(struct serio *serio) { struct atkbd *atkbd = serio_get_drvdata(serio); struct serio_driver *drv = serio->drv; + int retval = -1; if (!atkbd || !drv) { printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n"); return -1; } + mutex_lock(&atkbd->mutex); + atkbd_disable(atkbd); if (atkbd->write) { if (atkbd_probe(atkbd)) - return -1; + goto out; + if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra)) - return -1; + goto out; atkbd_activate(atkbd); @@ -1190,8 +1197,11 @@ static int atkbd_reconnect(struct serio *serio) } atkbd_enable(atkbd); + retval = 0; - return 0; + out: + mutex_unlock(&atkbd->mutex); + return retval; } static struct serio_device_id atkbd_serio_ids[] = { @@ -1235,47 +1245,28 @@ static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, ssize_t (*handler)(struct atkbd *, char *)) { struct serio *serio = to_serio_port(dev); - int retval; + struct atkbd *atkbd = serio_get_drvdata(serio); - retval = serio_pin_driver(serio); - if (retval) - return retval; - - if (serio->drv != &atkbd_drv) { - retval = -ENODEV; - goto out; - } - - retval = handler((struct atkbd *)serio_get_drvdata(serio), buf); - -out: - serio_unpin_driver(serio); - return retval; + return handler(atkbd, buf); } static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count, ssize_t (*handler)(struct atkbd *, const char *, size_t)) { struct serio *serio = to_serio_port(dev); - struct atkbd *atkbd; + struct atkbd *atkbd = serio_get_drvdata(serio); int retval; - retval = serio_pin_driver(serio); + retval = mutex_lock_interruptible(&atkbd->mutex); if (retval) return retval; - if (serio->drv != &atkbd_drv) { - retval = -ENODEV; - goto out; - } - - atkbd = serio_get_drvdata(serio); atkbd_disable(atkbd); retval = handler(atkbd, buf, count); atkbd_enable(atkbd); -out: - serio_unpin_driver(serio); + mutex_unlock(&atkbd->mutex); + return retval; } diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 401ac6b6edd4..d59e18b24ede 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -1450,24 +1450,10 @@ ssize_t psmouse_attr_show_helper(struct device *dev, struct device_attribute *de struct serio *serio = to_serio_port(dev); struct psmouse_attribute *attr = to_psmouse_attr(devattr); struct psmouse *psmouse; - int retval; - - retval = serio_pin_driver(serio); - if (retval) - return retval; - - if (serio->drv != &psmouse_drv) { - retval = -ENODEV; - goto out; - } psmouse = serio_get_drvdata(serio); - retval = attr->show(psmouse, attr->data, buf); - -out: - serio_unpin_driver(serio); - return retval; + return attr->show(psmouse, attr->data, buf); } ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *devattr, @@ -1478,18 +1464,9 @@ ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *dev struct psmouse *psmouse, *parent = NULL; int retval; - retval = serio_pin_driver(serio); - if (retval) - return retval; - - if (serio->drv != &psmouse_drv) { - retval = -ENODEV; - goto out_unpin; - } - retval = mutex_lock_interruptible(&psmouse_mutex); if (retval) - goto out_unpin; + goto out; psmouse = serio_get_drvdata(serio); @@ -1519,8 +1496,7 @@ ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *dev out_unlock: mutex_unlock(&psmouse_mutex); - out_unpin: - serio_unpin_driver(serio); + out: return retval; } @@ -1582,9 +1558,7 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co } mutex_unlock(&psmouse_mutex); - serio_unpin_driver(serio); serio_unregister_child_port(serio); - serio_pin_driver_uninterruptible(serio); mutex_lock(&psmouse_mutex); if (serio->drv != &psmouse_drv) { diff --git a/include/linux/serio.h b/include/linux/serio.h index e2f3044d4a4a..813d26c247ec 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -136,25 +136,6 @@ static inline void serio_continue_rx(struct serio *serio) spin_unlock_irq(&serio->lock); } -/* - * Use the following functions to pin serio's driver in process context - */ -static inline int serio_pin_driver(struct serio *serio) -{ - return mutex_lock_interruptible(&serio->drv_mutex); -} - -static inline void serio_pin_driver_uninterruptible(struct serio *serio) -{ - mutex_lock(&serio->drv_mutex); -} - -static inline void serio_unpin_driver(struct serio *serio) -{ - mutex_unlock(&serio->drv_mutex); -} - - #endif /* From 0ef7a26af1278f7ec0b718148e88f01ba1953835 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 5 Jan 2010 17:56:02 -0800 Subject: [PATCH 0406/1626] Input: atkbd - fix canceling event_work in disconnect We need to first unregister input device and only then cancel event work since events can arrive (and cause event work to get scheduled again) until input_unregister_device() returns. Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 1cf32a7814d0..7b4056292eaf 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -855,10 +855,16 @@ static void atkbd_disconnect(struct serio *serio) atkbd_disable(atkbd); - /* make sure we don't have a command in flight */ + input_unregister_device(atkbd->dev); + + /* + * Make sure we don't have a command in flight. + * Note that since atkbd->enabled is false event work will keep + * rescheduling itself until it gets canceled and will not try + * accessing freed input device or serio port. + */ cancel_delayed_work_sync(&atkbd->event_work); - input_unregister_device(atkbd->dev); serio_close(serio); serio_set_drvdata(serio, NULL); kfree(atkbd); From 30a589fde0162aa4dac7c69803aeee8fbe8d1b82 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Tue, 5 Jan 2010 17:56:04 -0800 Subject: [PATCH 0407/1626] Input: evdev - be less aggressive about sending SIGIO notifies When using realtime signals, we'll enqueue one signal for every event. This is unfortunate, because (for example) keyboard presses are three events: key, msc scancode, and syn. They'll be enqueued fast enough in kernel space that all three events will be ready to read by the time userspace runs, so the first invocation of the signal handler will read all three events, but then the second two invocations still have to run to do no work. Instead, only send the SIGIO notification on syn events. This is a slight abuse of SIGIO semantics, in principle it ought to fire as soon as any events are readable. But it matches evdev semantics, which is more important since SIGIO is rather vaguely defined to begin with. Signed-off-by: Adam Jackson Signed-off-by: Dmitry Torokhov --- drivers/input/evdev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index dee6706038aa..258c639571b5 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -59,7 +59,8 @@ static void evdev_pass_event(struct evdev_client *client, client->head &= EVDEV_BUFFER_SIZE - 1; spin_unlock(&client->buffer_lock); - kill_fasync(&client->fasync, SIGIO, POLL_IN); + if (event->type == EV_SYN) + kill_fasync(&client->fasync, SIGIO, POLL_IN); } /* From 861a64428c0786a5cfa2ffb36b2f8058dea5dda0 Mon Sep 17 00:00:00 2001 From: Miguel Aguilar Date: Wed, 6 Jan 2010 00:06:50 -0800 Subject: [PATCH 0408/1626] Input: davinci_keyscan - add device_enable method to platform data Add a function pointer in the platform data of the DaVinci Keyscan driver called device_enable, in order to perform board specific actions when the device is initialized, like setup the PINMUX configuration. Signed-off-by: Miguel Aguilar Signed-off-by: Kevin Hilman Signed-off-by: Dmitry Torokhov --- arch/arm/mach-davinci/include/mach/keyscan.h | 1 + drivers/input/keyboard/davinci_keyscan.c | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h index b4e21a2976d1..7a560e05bda8 100644 --- a/arch/arm/mach-davinci/include/mach/keyscan.h +++ b/arch/arm/mach-davinci/include/mach/keyscan.h @@ -29,6 +29,7 @@ enum davinci_matrix_types { }; struct davinci_ks_platform_data { + int (*device_enable)(struct device *dev); unsigned short *keymap; u32 keymapsize; u8 rep:1; diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c index 6e52d855f637..d410d7a52f1d 100644 --- a/drivers/input/keyboard/davinci_keyscan.c +++ b/drivers/input/keyboard/davinci_keyscan.c @@ -174,6 +174,14 @@ static int __init davinci_ks_probe(struct platform_device *pdev) struct davinci_ks_platform_data *pdata = pdev->dev.platform_data; int error, i; + if (pdata->device_enable) { + error = pdata->device_enable(dev); + if (error < 0) { + dev_dbg(dev, "device enable function failed\n"); + return error; + } + } + if (!pdata->keymap) { dev_dbg(dev, "no keymap from pdata\n"); return -EINVAL; From 6f2701b79f2ee0c5eb946e8a87993acbe8041da3 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Wed, 6 Jan 2010 00:32:48 -0800 Subject: [PATCH 0409/1626] Input: bcm5974 - report ABS_MT events Make bcm5974 report raw multi-touch (MT) data in the form of ABS_MT events. [dtor@mail.ru: get rid of module option, always report all events] Signed-off-by: Henrik Rydberg Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/bcm5974.c | 44 ++++++++++++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-) diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 0d1d33468b43..4f8fe0886b2a 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -139,6 +139,7 @@ struct tp_finger { /* trackpad finger data size, empirically at least ten fingers */ #define SIZEOF_FINGER sizeof(struct tp_finger) #define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER) +#define MAX_FINGER_ORIENTATION 16384 /* device-specific parameters */ struct bcm5974_param { @@ -284,6 +285,26 @@ static void setup_events_to_report(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_Y, 0, cfg->y.dim, cfg->y.fuzz, 0); + /* finger touch area */ + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, + cfg->w.devmin, cfg->w.devmax, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, + cfg->w.devmin, cfg->w.devmax, 0, 0); + /* finger approach area */ + input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, + cfg->w.devmin, cfg->w.devmax, 0, 0); + input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR, + cfg->w.devmin, cfg->w.devmax, 0, 0); + /* finger orientation */ + input_set_abs_params(input_dev, ABS_MT_ORIENTATION, + -MAX_FINGER_ORIENTATION, + MAX_FINGER_ORIENTATION, 0, 0); + /* finger position */ + input_set_abs_params(input_dev, ABS_MT_POSITION_X, + cfg->x.devmin, cfg->x.devmax, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, + cfg->y.devmin, cfg->y.devmax, 0, 0); + __set_bit(EV_KEY, input_dev->evbit); __set_bit(BTN_TOUCH, input_dev->keybit); __set_bit(BTN_TOOL_FINGER, input_dev->keybit); @@ -310,13 +331,29 @@ static int report_bt_state(struct bcm5974 *dev, int size) return 0; } +static void report_finger_data(struct input_dev *input, + const struct bcm5974_config *cfg, + const struct tp_finger *f) +{ + input_report_abs(input, ABS_MT_TOUCH_MAJOR, raw2int(f->force_major)); + input_report_abs(input, ABS_MT_TOUCH_MINOR, raw2int(f->force_minor)); + input_report_abs(input, ABS_MT_WIDTH_MAJOR, raw2int(f->size_major)); + input_report_abs(input, ABS_MT_WIDTH_MINOR, raw2int(f->size_minor)); + input_report_abs(input, ABS_MT_ORIENTATION, + MAX_FINGER_ORIENTATION - raw2int(f->orientation)); + input_report_abs(input, ABS_MT_POSITION_X, raw2int(f->abs_x)); + input_report_abs(input, ABS_MT_POSITION_Y, + cfg->y.devmin + cfg->y.devmax - raw2int(f->abs_y)); + input_mt_sync(input); +} + /* report trackpad data as logical trackpad state */ static int report_tp_state(struct bcm5974 *dev, int size) { const struct bcm5974_config *c = &dev->cfg; const struct tp_finger *f; struct input_dev *input = dev->input; - int raw_p, raw_w, raw_x, raw_y, raw_n; + int raw_p, raw_w, raw_x, raw_y, raw_n, i; int ptest, origin, ibt = 0, nmin = 0, nmax = 0; int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0; @@ -329,6 +366,11 @@ static int report_tp_state(struct bcm5974 *dev, int size) /* always track the first finger; when detached, start over */ if (raw_n) { + + /* report raw trackpad data */ + for (i = 0; i < raw_n; i++) + report_finger_data(input, c, &f[i]); + raw_p = raw2int(f->force_major); raw_w = raw2int(f->size_major); raw_x = raw2int(f->abs_x); From 10b465aaf9536ee5a16652fa0700740183d48ec9 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 19 Dec 2009 14:43:01 +0000 Subject: [PATCH 0410/1626] modules: Skip empty sections when exporting section notes Commit 35dead4 "modules: don't export section names of empty sections via sysfs" changed the set of sections that have attributes, but did not change the iteration over these attributes in add_notes_attrs(). This can lead to add_notes_attrs() creating attributes with the wrong names or with null name pointers. Introduce a sect_empty() function and use it in both add_sect_attrs() and add_notes_attrs(). Reported-by: Martin Michlmayr Signed-off-by: Ben Hutchings Tested-by: Martin Michlmayr Cc: stable@kernel.org Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- kernel/module.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/kernel/module.c b/kernel/module.c index e96b8ed1cb6a..f82386bd9ee9 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1010,6 +1010,12 @@ static const struct kernel_symbol *resolve_symbol(Elf_Shdr *sechdrs, * J. Corbet */ #if defined(CONFIG_KALLSYMS) && defined(CONFIG_SYSFS) + +static inline bool sect_empty(const Elf_Shdr *sect) +{ + return !(sect->sh_flags & SHF_ALLOC) || sect->sh_size == 0; +} + struct module_sect_attr { struct module_attribute mattr; @@ -1051,8 +1057,7 @@ static void add_sect_attrs(struct module *mod, unsigned int nsect, /* Count loaded sections and allocate structures */ for (i = 0; i < nsect; i++) - if (sechdrs[i].sh_flags & SHF_ALLOC - && sechdrs[i].sh_size) + if (!sect_empty(&sechdrs[i])) nloaded++; size[0] = ALIGN(sizeof(*sect_attrs) + nloaded * sizeof(sect_attrs->attrs[0]), @@ -1070,9 +1075,7 @@ static void add_sect_attrs(struct module *mod, unsigned int nsect, sattr = §_attrs->attrs[0]; gattr = §_attrs->grp.attrs[0]; for (i = 0; i < nsect; i++) { - if (! (sechdrs[i].sh_flags & SHF_ALLOC)) - continue; - if (!sechdrs[i].sh_size) + if (sect_empty(&sechdrs[i])) continue; sattr->address = sechdrs[i].sh_addr; sattr->name = kstrdup(secstrings + sechdrs[i].sh_name, @@ -1156,7 +1159,7 @@ static void add_notes_attrs(struct module *mod, unsigned int nsect, /* Count notes sections and allocate structures. */ notes = 0; for (i = 0; i < nsect; i++) - if ((sechdrs[i].sh_flags & SHF_ALLOC) && + if (!sect_empty(&sechdrs[i]) && (sechdrs[i].sh_type == SHT_NOTE)) ++notes; @@ -1172,7 +1175,7 @@ static void add_notes_attrs(struct module *mod, unsigned int nsect, notes_attrs->notes = notes; nattr = ¬es_attrs->attrs[0]; for (loaded = i = 0; i < nsect; ++i) { - if (!(sechdrs[i].sh_flags & SHF_ALLOC)) + if (sect_empty(&sechdrs[i])) continue; if (sechdrs[i].sh_type == SHT_NOTE) { nattr->attr.name = mod->sect_attrs->attrs[loaded].name; From 1e65346b3b26b87f46b3d861ca023e2652b8ac65 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 6 Jan 2010 09:25:54 -0600 Subject: [PATCH 0411/1626] powerpc: 2.6.33 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx Signed-off-by: Kumar Gala --- arch/powerpc/configs/83xx/asp8347_defconfig | 88 +++++++++++---- arch/powerpc/configs/83xx/kmeter1_defconfig | 68 ++++++++++-- .../configs/83xx/mpc8313_rdb_defconfig | 97 +++++++++++++---- .../configs/83xx/mpc8315_rdb_defconfig | 100 +++++++++++++---- .../configs/83xx/mpc832x_mds_defconfig | 89 +++++++++++---- .../configs/83xx/mpc832x_rdb_defconfig | 93 ++++++++++++---- .../configs/83xx/mpc834x_itx_defconfig | 95 ++++++++++++---- .../configs/83xx/mpc834x_itxgp_defconfig | 92 ++++++++++++---- .../configs/83xx/mpc834x_mds_defconfig | 86 +++++++++++---- .../configs/83xx/mpc836x_mds_defconfig | 89 +++++++++++---- .../configs/83xx/mpc836x_rdk_defconfig | 87 +++++++++++---- .../configs/83xx/mpc837x_mds_defconfig | 89 +++++++++++---- .../configs/83xx/mpc837x_rdb_defconfig | 91 ++++++++++++---- arch/powerpc/configs/83xx/sbc834x_defconfig | 85 +++++++++++---- arch/powerpc/configs/85xx/ksi8560_defconfig | 69 +++++++++--- .../configs/85xx/mpc8540_ads_defconfig | 69 +++++++++--- .../configs/85xx/mpc8560_ads_defconfig | 76 ++++++++++--- .../configs/85xx/mpc85xx_cds_defconfig | 75 ++++++++++--- arch/powerpc/configs/85xx/sbc8548_defconfig | 77 ++++++++++--- arch/powerpc/configs/85xx/sbc8560_defconfig | 72 +++++++++--- arch/powerpc/configs/85xx/socrates_defconfig | 99 +++++++++++++---- arch/powerpc/configs/85xx/stx_gp3_defconfig | 87 +++++++++++---- arch/powerpc/configs/85xx/tqm8540_defconfig | 89 +++++++++++---- arch/powerpc/configs/85xx/tqm8541_defconfig | 90 +++++++++++---- arch/powerpc/configs/85xx/tqm8548_defconfig | 95 ++++++++++++---- arch/powerpc/configs/85xx/tqm8555_defconfig | 90 +++++++++++---- arch/powerpc/configs/85xx/tqm8560_defconfig | 90 +++++++++++---- .../configs/85xx/xes_mpc85xx_defconfig | 103 ++++++++++++++---- arch/powerpc/configs/86xx/gef_ppc9a_defconfig | 102 +++++++++++++---- .../powerpc/configs/86xx/gef_sbc310_defconfig | 99 +++++++++++++---- .../powerpc/configs/86xx/gef_sbc610_defconfig | 92 ++++++++++++---- .../configs/86xx/mpc8610_hpcd_defconfig | 88 +++++++++++---- .../configs/86xx/mpc8641_hpcn_defconfig | 90 +++++++++++---- arch/powerpc/configs/86xx/sbc8641d_defconfig | 81 ++++++++++---- arch/powerpc/configs/adder875_defconfig | 57 ++++++++-- arch/powerpc/configs/c2k_defconfig | 90 ++++++++++----- arch/powerpc/configs/ep8248e_defconfig | 64 ++++++++--- arch/powerpc/configs/ep88xc_defconfig | 55 ++++++++-- arch/powerpc/configs/linkstation_defconfig | 96 ++++++++++++---- arch/powerpc/configs/mgcoge_defconfig | 74 +++++++++---- arch/powerpc/configs/mgsuvd_defconfig | 63 ++++++++--- arch/powerpc/configs/mpc7448_hpc2_defconfig | 79 +++++++++++--- arch/powerpc/configs/mpc8272_ads_defconfig | 70 +++++++++--- arch/powerpc/configs/mpc83xx_defconfig | 92 ++++++++++++---- arch/powerpc/configs/mpc85xx_defconfig | 97 +++++++++++++---- arch/powerpc/configs/mpc85xx_smp_defconfig | 97 +++++++++++++---- arch/powerpc/configs/mpc866_ads_defconfig | 65 ++++++++--- arch/powerpc/configs/mpc86xx_defconfig | 93 ++++++++++++---- arch/powerpc/configs/mpc885_ads_defconfig | 55 ++++++++-- arch/powerpc/configs/pq2fads_defconfig | 72 +++++++++--- arch/powerpc/configs/prpmc2800_defconfig | 94 ++++++++++++---- arch/powerpc/configs/storcenter_defconfig | 86 +++++++++++---- 52 files changed, 3351 insertions(+), 1030 deletions(-) diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index 466f09ac3153..baa2bbb6c096 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:20 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:14 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -60,6 +61,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_REDBOOT=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -88,6 +90,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -174,14 +177,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -260,6 +290,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -276,8 +307,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -404,9 +433,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -530,6 +556,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -541,6 +571,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -548,6 +579,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -581,7 +613,7 @@ CONFIG_HAVE_IDE=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -668,8 +700,11 @@ CONFIG_GIANFAR=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -691,6 +726,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -700,6 +736,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -751,6 +788,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -806,11 +844,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -820,7 +853,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -866,6 +898,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -904,6 +937,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set CONFIG_THERMAL=y # CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y @@ -942,11 +976,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -996,6 +1032,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1101,6 +1138,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1122,7 +1160,9 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1347,7 +1387,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1374,7 +1414,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig index 6694fb73cd99..8b1aa806e548 100644 --- a/arch/powerpc/configs/83xx/kmeter1_defconfig +++ b/arch/powerpc/configs/83xx/kmeter1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:21 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:14 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -89,6 +91,7 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -168,14 +171,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -253,6 +283,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -269,8 +300,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -384,7 +413,13 @@ CONFIG_LLC=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -512,6 +547,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set @@ -581,8 +620,7 @@ CONFIG_UCC_GETH=y # CONFIG_MV643XX_ETH is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -652,6 +690,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -697,7 +736,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -732,11 +770,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -933,7 +973,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -963,7 +1003,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 86df19f041a4..2f2d98558e44 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:22 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:15 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -87,6 +89,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -173,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -259,6 +289,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -275,8 +306,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -404,9 +433,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -544,6 +570,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -555,6 +585,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -562,6 +593,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -615,7 +648,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -653,6 +688,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -680,7 +716,7 @@ CONFIG_MD_RAID1=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -805,8 +841,11 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -829,6 +868,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -838,6 +878,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -890,6 +931,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -946,11 +988,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -960,7 +997,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -975,6 +1011,8 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=y # CONFIG_SPI_MPC8xxx is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -1022,6 +1060,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1062,6 +1101,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1099,6 +1139,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set @@ -1106,6 +1147,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1173,6 +1216,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1287,15 +1331,17 @@ CONFIG_USB_NET2280=y CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set # CONFIG_USB_AUDIO is not set -CONFIG_USB_ETH=y +CONFIG_USB_ETH=m CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_ETH_EEM is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_MASS_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_MULTI is not set # # OTG and related infrastructure @@ -1336,6 +1382,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1365,7 +1412,9 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1676,7 +1725,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 7bf71d577033..633e61194603 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:23 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:16 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -87,6 +89,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -173,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -259,6 +289,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -275,8 +306,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -404,9 +433,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -544,6 +570,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -555,6 +585,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -562,6 +593,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -615,7 +648,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -654,6 +689,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -709,15 +745,16 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -744,7 +781,7 @@ CONFIG_MD_RAID1=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -869,8 +906,11 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -893,6 +933,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -902,6 +943,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -954,6 +996,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -1010,11 +1053,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -1024,7 +1062,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1039,6 +1076,8 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=y # CONFIG_SPI_MPC8xxx is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -1086,6 +1125,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1126,6 +1166,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1163,6 +1204,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set @@ -1170,6 +1212,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1237,6 +1281,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1351,15 +1396,17 @@ CONFIG_USB_NET2280=y CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set # CONFIG_USB_AUDIO is not set -CONFIG_USB_ETH=y +CONFIG_USB_ETH=m CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_ETH_EEM is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_MASS_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_MULTI is not set # # OTG and related infrastructure @@ -1400,6 +1447,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1429,7 +1477,9 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1740,7 +1790,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index 7def83518a6c..0b4262bd4917 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:24 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:17 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -87,6 +89,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -173,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -260,6 +290,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -276,8 +307,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -404,9 +433,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -444,6 +470,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -454,6 +484,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -461,6 +492,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -513,7 +545,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -551,6 +585,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -568,7 +603,7 @@ CONFIG_SCSI_LOWLEVEL=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -675,8 +710,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -690,6 +727,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -699,6 +737,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -751,6 +790,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -806,11 +846,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -820,7 +855,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -866,6 +900,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -904,6 +939,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -936,11 +972,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1023,6 +1061,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1044,7 +1083,9 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1220,7 +1261,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1247,7 +1288,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index b398b9b2b635..155af009f7b5 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:24 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:18 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -87,6 +89,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -173,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -260,6 +290,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -276,8 +307,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -404,9 +433,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -445,6 +471,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -456,6 +486,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -463,6 +494,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -474,6 +507,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_CB710_CORE is not set +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -516,7 +550,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -554,6 +590,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -571,7 +608,7 @@ CONFIG_SCSI_LOWLEVEL=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -680,8 +717,11 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -704,6 +744,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -713,6 +754,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -766,6 +808,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -824,11 +867,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -838,7 +876,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -852,6 +889,8 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=y # CONFIG_SPI_MPC8xxx is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -899,6 +938,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -939,6 +979,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -976,6 +1017,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set @@ -983,6 +1025,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1050,6 +1094,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1387,7 +1432,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1414,7 +1459,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index f67317e1934c..ff45f4904488 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:25 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:19 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -87,6 +89,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -173,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -259,6 +289,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -275,8 +306,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -403,9 +432,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -528,6 +554,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -539,6 +569,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -546,6 +577,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -647,7 +680,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -686,6 +721,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -741,15 +777,16 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y @@ -777,7 +814,7 @@ CONFIG_MD_RAID1=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -860,8 +897,11 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -884,6 +924,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -925,6 +966,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -981,11 +1023,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -995,7 +1032,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1009,6 +1045,8 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=y # CONFIG_SPI_MPC8xxx is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -1062,6 +1100,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set @@ -1069,6 +1108,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1117,6 +1158,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1235,6 +1277,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1264,7 +1307,9 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1485,7 +1530,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1512,7 +1557,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index a668110c10f6..28d8ff3e8fca 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:26 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:20 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -87,6 +89,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -173,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -259,6 +289,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -275,8 +306,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -403,9 +432,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -528,6 +554,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -539,6 +569,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -546,6 +577,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -599,7 +632,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -637,6 +672,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -654,7 +690,7 @@ CONFIG_SCSI_LOWLEVEL=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -737,8 +773,11 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -761,6 +800,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -802,6 +842,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -858,11 +899,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -872,7 +908,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -886,6 +921,8 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=y # CONFIG_SPI_MPC8xxx is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -939,6 +976,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set @@ -946,6 +984,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -994,6 +1034,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1112,6 +1153,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1141,7 +1183,9 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1362,7 +1406,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1389,7 +1433,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index c4e92ba5c38b..6252ab5bf181 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:27 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:21 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -87,6 +89,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -173,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -259,6 +289,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -275,8 +306,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -403,9 +432,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -443,6 +469,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -453,6 +483,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -460,6 +491,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -493,7 +525,7 @@ CONFIG_HAVE_IDE=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -616,8 +648,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -630,6 +664,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -639,6 +674,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -690,6 +726,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -744,11 +781,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -758,7 +790,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -804,6 +835,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -842,6 +874,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -874,11 +907,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -961,6 +996,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -982,7 +1018,9 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1156,7 +1194,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1183,7 +1221,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index 4f434b1492fa..78227378e678 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:28 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:21 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -87,6 +89,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -173,14 +176,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -258,6 +288,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -274,8 +305,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -402,9 +431,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -525,6 +551,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -535,6 +565,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -542,6 +573,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -594,7 +626,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -632,6 +666,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -649,7 +684,7 @@ CONFIG_SCSI_LOWLEVEL=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -756,8 +791,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -771,6 +808,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -780,6 +818,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -832,6 +871,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -887,11 +927,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -901,7 +936,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -947,6 +981,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -985,6 +1020,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1017,11 +1053,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1104,6 +1142,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1125,7 +1164,9 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1302,7 +1343,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1329,7 +1370,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index b52ec0861679..9451d6e5c802 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:30 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:23 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -60,6 +61,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -88,6 +90,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -174,14 +177,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -258,6 +288,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -274,8 +305,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -404,9 +433,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -539,6 +565,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -549,6 +579,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -556,6 +587,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -590,7 +623,7 @@ CONFIG_HAVE_IDE=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -657,8 +690,10 @@ CONFIG_UCC_GETH=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -671,6 +706,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -680,6 +716,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -737,6 +774,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_SERIAL_QE=y +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -794,11 +832,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -808,7 +841,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -823,6 +855,8 @@ CONFIG_SPI_MASTER=y CONFIG_SPI_BITBANG=y # CONFIG_SPI_GPIO is not set # CONFIG_SPI_MPC8xxx is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -854,6 +888,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -903,6 +938,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set @@ -910,6 +946,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1199,7 +1237,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1230,6 +1268,7 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_44x is not set # CONFIG_PPC_EARLY_DEBUG_40x is not set # CONFIG_PPC_EARLY_DEBUG_CPM is not set +# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set # # Security options @@ -1237,7 +1276,11 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index 730061574f96..f67b70d0b292 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:29 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:22 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -87,6 +89,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -174,14 +177,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -259,6 +289,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -275,8 +306,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -403,9 +432,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -443,6 +469,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -453,6 +483,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -460,6 +491,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -512,7 +544,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -551,6 +585,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -606,15 +641,16 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -631,7 +667,7 @@ CONFIG_ATA_SFF=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -736,8 +772,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -751,6 +789,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -760,6 +799,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -811,6 +851,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -867,11 +908,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -881,7 +917,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -927,6 +962,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -965,6 +1001,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -997,11 +1034,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1226,7 +1265,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1253,7 +1292,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 9e9158a5b190..a84fd1194e2b 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:30 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:24 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -87,6 +89,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -174,14 +177,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -259,6 +289,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -275,8 +306,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -398,9 +427,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -438,6 +464,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -449,6 +479,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -456,6 +487,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -507,7 +539,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -546,6 +580,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -601,15 +636,16 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -638,7 +674,7 @@ CONFIG_MD_RAID6_PQ=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -725,8 +761,11 @@ CONFIG_GIANFAR=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -749,6 +788,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -758,6 +798,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -809,6 +850,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -866,11 +908,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -880,7 +917,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -926,6 +962,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -964,6 +1001,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1001,11 +1039,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1097,6 +1137,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1385,7 +1426,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1412,7 +1453,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index 6b399154970f..72c2067137b9 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:31 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:25 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -87,6 +89,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -172,14 +175,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -257,6 +287,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -273,8 +304,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -401,9 +430,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -524,6 +550,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -535,6 +565,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -542,6 +573,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -604,7 +636,7 @@ CONFIG_SCSI_WAIT_SCAN=m # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -691,8 +723,11 @@ CONFIG_GIANFAR=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -715,6 +750,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -724,6 +760,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -775,6 +812,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -832,11 +870,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -846,7 +879,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -892,6 +924,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -930,6 +963,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -967,11 +1001,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1039,6 +1075,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1321,7 +1358,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1348,7 +1385,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index a5bde8da462c..21dad38b156f 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:32 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:26 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -62,6 +63,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -89,6 +92,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -169,14 +173,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -185,7 +216,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -204,6 +235,7 @@ CONFIG_KSI8560=y # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set # CONFIG_SBC8560 is not set +# CONFIG_P4080_DS is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -248,6 +280,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -264,8 +297,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -385,9 +416,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -503,6 +531,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -603,8 +635,7 @@ CONFIG_GIANFAR=y # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -624,6 +655,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -669,6 +701,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -1051,7 +1084,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index c10e26f8763f..5db54cd274c6 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:33 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:27 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -61,6 +62,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -88,6 +91,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -170,14 +174,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -186,7 +217,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y CONFIG_MPC8540_ADS=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -205,6 +236,7 @@ CONFIG_MPC8540_ADS=y # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set # CONFIG_SBC8560 is not set +# CONFIG_P4080_DS is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -249,6 +281,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -265,8 +298,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -386,9 +417,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -423,6 +451,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -500,8 +532,7 @@ CONFIG_GIANFAR=y # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -521,6 +552,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -570,6 +602,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -920,7 +953,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 8d9f0a4b5205..76c7018c5cd2 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:34 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:28 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -62,6 +63,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -89,6 +92,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -173,14 +177,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -189,7 +220,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y # CONFIG_MPC8540_ADS is not set CONFIG_MPC8560_ADS=y # CONFIG_MPC85xx_CDS is not set @@ -208,6 +239,7 @@ CONFIG_MPC8560_ADS=y # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set # CONFIG_SBC8560 is not set +# CONFIG_P4080_DS is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -252,6 +284,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -268,8 +301,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -398,9 +429,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -440,6 +468,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -485,7 +517,7 @@ CONFIG_HAVE_IDE=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -594,8 +626,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -608,6 +642,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -617,6 +652,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -664,6 +700,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -705,6 +742,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1054,7 +1092,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index 9b63e258dac6..fab8adacbf79 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:35 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:29 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -61,6 +62,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -88,6 +91,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -171,14 +175,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -187,7 +218,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set CONFIG_MPC85xx_CDS=y @@ -206,6 +237,7 @@ CONFIG_MPC85xx_CDS=y # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set # CONFIG_SBC8560 is not set +# CONFIG_P4080_DS is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -250,6 +282,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -266,8 +299,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -396,9 +427,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -437,6 +465,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -537,7 +569,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -642,8 +674,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -656,6 +690,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -665,6 +700,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -717,6 +753,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -1079,7 +1116,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 1b2356830173..8290385e9b94 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:36 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:29 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -61,6 +62,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -88,6 +91,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -169,14 +173,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -185,7 +216,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -204,6 +235,7 @@ CONFIG_MPC85xx=y # CONFIG_TQM8560 is not set CONFIG_SBC8548=y # CONFIG_SBC8560 is not set +# CONFIG_P4080_DS is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -247,6 +279,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -263,8 +296,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -392,9 +423,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -431,6 +459,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -476,7 +508,7 @@ CONFIG_HAVE_IDE=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -581,8 +613,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -595,6 +629,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -604,6 +639,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -656,6 +692,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -889,7 +926,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -915,7 +952,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index 959d0281431b..2499b5ba7141 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:37 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:30 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -61,6 +62,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -88,6 +91,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -169,14 +173,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -185,7 +216,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -204,6 +235,7 @@ CONFIG_MPC85xx=y # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set CONFIG_SBC8560=y +# CONFIG_P4080_DS is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -247,6 +279,7 @@ CONFIG_BINFMT_MISC=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -263,8 +296,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -384,9 +415,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -421,6 +449,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -498,8 +530,7 @@ CONFIG_GIANFAR=y # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -519,6 +550,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -568,6 +600,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -702,7 +735,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set CONFIG_RTC_DRV_M48T59=y +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -948,6 +983,7 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_44x is not set # CONFIG_PPC_EARLY_DEBUG_40x is not set # CONFIG_PPC_EARLY_DEBUG_CPM is not set +# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set # # Security options @@ -955,7 +991,11 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig index 7f5ec35bf199..e2edb79cfd1a 100644 --- a/arch/powerpc/configs/85xx/socrates_defconfig +++ b/arch/powerpc/configs/85xx/socrates_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:37 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:31 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -61,6 +62,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -88,6 +91,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -174,14 +178,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -190,7 +221,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -209,6 +240,7 @@ CONFIG_SOCRATES=y # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set # CONFIG_SBC8560 is not set +# CONFIG_P4080_DS is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -252,6 +284,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -268,8 +301,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -404,9 +435,6 @@ CONFIG_CAN_BCM=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -540,6 +568,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -551,6 +583,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -558,6 +591,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -621,7 +656,7 @@ CONFIG_SCSI_WAIT_SCAN=m # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -710,8 +745,11 @@ CONFIG_GIANFAR=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -734,6 +772,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -743,6 +782,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -768,6 +808,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set @@ -826,6 +867,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -882,11 +924,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -896,7 +933,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -910,6 +946,8 @@ CONFIG_SPI_MASTER=y # # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_MPC8xxx is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -957,6 +995,7 @@ CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -997,6 +1036,7 @@ CONFIG_SENSORS_W83781D=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1015,6 +1055,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set @@ -1022,6 +1063,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1192,6 +1235,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1318,6 +1362,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1347,7 +1392,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1574,7 +1621,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1600,7 +1647,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index c8327e88a987..ce313259df14 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:38 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:32 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -62,6 +63,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -89,6 +92,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -178,14 +182,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -194,7 +225,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -213,6 +244,7 @@ CONFIG_STX_GP3=y # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set # CONFIG_SBC8560 is not set +# CONFIG_P4080_DS is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -257,6 +289,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -273,8 +306,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -463,9 +494,6 @@ CONFIG_NET_PKTGEN=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -513,6 +541,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -523,6 +555,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -530,6 +563,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -633,7 +667,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -673,6 +709,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -690,7 +727,7 @@ CONFIG_SCSI_LOWLEVEL=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -797,8 +834,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -813,6 +852,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -822,6 +862,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -881,6 +922,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -905,6 +947,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -969,11 +1012,6 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -983,7 +1021,6 @@ CONFIG_I2C_ALGOBIT=m # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1016,6 +1053,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1058,6 +1096,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1097,6 +1136,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1115,7 +1155,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TPS65010 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1465,7 +1504,11 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index 82563703d5e3..0824b4667229 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:39 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:33 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -61,6 +62,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -88,6 +91,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -169,14 +173,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -185,7 +216,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -204,6 +235,7 @@ CONFIG_TQM8540=y # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set # CONFIG_SBC8560 is not set +# CONFIG_P4080_DS is not set CONFIG_TQM85xx=y # CONFIG_IPIC is not set CONFIG_MPIC=y @@ -248,6 +280,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -264,8 +297,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -391,9 +422,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -510,6 +538,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -520,6 +552,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -527,6 +560,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -615,7 +649,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -738,8 +772,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -752,6 +788,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -761,6 +798,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -813,6 +851,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -870,11 +909,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -883,7 +917,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -929,6 +962,7 @@ CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -967,6 +1001,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -985,11 +1020,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1220,7 +1257,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1246,7 +1283,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index 91d85d733827..2137be4100ed 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:40 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:34 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -62,6 +63,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -89,6 +92,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -171,14 +175,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -187,7 +218,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -206,6 +237,7 @@ CONFIG_TQM8541=y # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set # CONFIG_SBC8560 is not set +# CONFIG_P4080_DS is not set CONFIG_TQM85xx=y # CONFIG_IPIC is not set CONFIG_MPIC=y @@ -251,6 +283,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -267,8 +300,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -394,9 +425,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -514,6 +542,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -524,6 +556,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -531,6 +564,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -619,7 +653,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -743,8 +777,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -757,6 +793,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -766,6 +803,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -820,6 +858,7 @@ CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -880,11 +919,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -893,7 +927,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -925,6 +958,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -967,6 +1001,7 @@ CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1006,6 +1041,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1025,11 +1061,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1260,7 +1298,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1286,7 +1324,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index debe268f43d1..5cc89aac3fec 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:41 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:35 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -61,6 +62,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -88,6 +91,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -177,14 +181,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -193,7 +224,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -212,6 +243,7 @@ CONFIG_TQM8548=y # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set # CONFIG_SBC8560 is not set +# CONFIG_P4080_DS is not set CONFIG_TQM85xx=y # CONFIG_IPIC is not set CONFIG_MPIC=y @@ -257,6 +289,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -273,8 +306,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -406,7 +437,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -535,6 +572,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -545,6 +586,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -552,6 +594,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -585,7 +628,7 @@ CONFIG_HAVE_IDE=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -690,8 +733,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -704,6 +749,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -713,6 +759,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -765,6 +812,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -819,11 +867,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -833,7 +876,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -879,6 +921,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -917,6 +960,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -935,11 +979,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1003,6 +1049,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1024,7 +1071,9 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1280,7 +1329,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index 74515501f5b7..e7b9148e58cf 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:42 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:36 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -62,6 +63,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -89,6 +92,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -171,14 +175,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -187,7 +218,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -206,6 +237,7 @@ CONFIG_TQM8555=y # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set # CONFIG_SBC8560 is not set +# CONFIG_P4080_DS is not set CONFIG_TQM85xx=y # CONFIG_IPIC is not set CONFIG_MPIC=y @@ -251,6 +283,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -267,8 +300,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -394,9 +425,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -514,6 +542,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -524,6 +556,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -531,6 +564,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -619,7 +653,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -743,8 +777,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -757,6 +793,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -766,6 +803,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -820,6 +858,7 @@ CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -880,11 +919,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -893,7 +927,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -925,6 +958,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -967,6 +1001,7 @@ CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1006,6 +1041,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1025,11 +1061,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1260,7 +1298,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1286,7 +1324,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index 631d92b4d4e6..a998e401bbfc 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:43 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:36 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -62,6 +63,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -89,6 +92,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -171,14 +175,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -187,7 +218,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -206,6 +237,7 @@ CONFIG_MPC85xx=y CONFIG_TQM8560=y # CONFIG_SBC8548 is not set # CONFIG_SBC8560 is not set +# CONFIG_P4080_DS is not set CONFIG_TQM85xx=y # CONFIG_IPIC is not set CONFIG_MPIC=y @@ -251,6 +283,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -267,8 +300,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -394,9 +425,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -514,6 +542,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -524,6 +556,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -531,6 +564,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -619,7 +653,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -743,8 +777,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -757,6 +793,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -766,6 +803,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -820,6 +858,7 @@ CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -880,11 +919,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -893,7 +927,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -925,6 +958,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -967,6 +1001,7 @@ CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1006,6 +1041,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1025,11 +1061,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1260,7 +1298,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1286,7 +1324,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig index 52acbac0c4fe..fc656af04ea1 100644 --- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig +++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:44 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:37 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -40,6 +40,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -63,6 +64,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -93,6 +96,7 @@ CONFIG_AUDIT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -181,14 +185,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y # CONFIG_FREEZER is not set CONFIG_PPC_MSI_BITMAP=y @@ -198,7 +229,7 @@ CONFIG_PPC_MSI_BITMAP=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -217,6 +248,7 @@ CONFIG_XES_MPC85xx=y # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set # CONFIG_SBC8560 is not set +# CONFIG_P4080_DS is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -261,6 +293,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -277,8 +310,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -404,6 +435,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -441,7 +473,13 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -576,6 +614,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -587,6 +629,7 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -594,6 +637,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -646,7 +690,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -685,6 +731,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -740,15 +787,16 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -765,7 +813,7 @@ CONFIG_PATA_ALI=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -852,8 +900,11 @@ CONFIG_GIANFAR=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -876,6 +927,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -885,6 +937,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -914,6 +967,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -950,6 +1004,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -1006,11 +1061,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -1020,7 +1070,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1053,6 +1102,7 @@ CONFIG_GPIO_PCA953X=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1095,6 +1145,7 @@ CONFIG_SENSORS_DS1621=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1134,6 +1185,7 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1172,11 +1224,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1368,6 +1422,7 @@ CONFIG_LEDS_GPIO_OF=y # CONFIG_LEDS_LP3944 is not set CONFIG_LEDS_PCA955X=y # CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set # # LED Triggers @@ -1391,7 +1446,6 @@ CONFIG_EDAC=y # # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y -CONFIG_EDAC_MPC85XX=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1420,6 +1474,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1441,7 +1496,9 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1772,7 +1829,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index 6cd2cd65c2cd..a85f927bf225 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:49 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:43 2010 # # CONFIG_PPC64 is not set @@ -38,6 +38,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -62,6 +63,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -91,6 +94,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -181,14 +185,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y # CONFIG_FREEZER is not set # @@ -259,6 +290,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -275,8 +307,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -314,7 +344,6 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y # CONFIG_PCMCIA_LOAD_CIS is not set # CONFIG_PCMCIA_IOCTL is not set @@ -414,6 +443,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -451,7 +481,13 @@ CONFIG_NET_PKTGEN=m # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -570,6 +606,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -581,6 +621,7 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -588,6 +629,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +CONFIG_DS1682=y # CONFIG_C2PORT is not set # @@ -689,7 +731,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -728,6 +772,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set @@ -785,15 +830,16 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -810,7 +856,7 @@ CONFIG_SATA_SIL=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -897,8 +943,14 @@ CONFIG_GIANFAR=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -937,6 +989,7 @@ CONFIG_NETCONSOLE=y CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -946,6 +999,7 @@ CONFIG_NET_POLL_CONTROLLER=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -1005,6 +1059,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -1069,11 +1124,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -1083,7 +1133,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -CONFIG_DS1682=y # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1115,6 +1164,7 @@ CONFIG_GPIO_SYSFS=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1157,6 +1207,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1196,6 +1247,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1235,11 +1287,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1338,6 +1392,7 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set # CONFIG_USB_EHCI_FSL is not set # CONFIG_USB_EHCI_HCD_PPC_OF is not set # CONFIG_USB_OXU210HP_HCD is not set @@ -1464,6 +1519,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set CONFIG_RTC_DRV_RX8581=y @@ -1485,7 +1541,9 @@ CONFIG_RTC_DRV_RX8581=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1710,7 +1768,7 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1737,7 +1795,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig index a6a3768f7304..eb58dec11a61 100644 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:47 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:41 2010 # # CONFIG_PPC64 is not set @@ -38,6 +38,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -62,6 +63,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -91,6 +94,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -181,14 +185,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y # CONFIG_FREEZER is not set # @@ -259,6 +290,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -275,8 +307,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -314,7 +344,6 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y # CONFIG_PCMCIA_LOAD_CIS is not set # CONFIG_PCMCIA_IOCTL is not set @@ -414,6 +443,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -451,7 +481,13 @@ CONFIG_NET_PKTGEN=m # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -570,6 +606,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -581,6 +621,7 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -588,6 +629,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +CONFIG_DS1682=y # CONFIG_C2PORT is not set # @@ -689,7 +731,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -728,6 +772,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set @@ -753,7 +798,7 @@ CONFIG_SATA_SIL24=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -840,8 +885,14 @@ CONFIG_GIANFAR=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -880,6 +931,7 @@ CONFIG_NETCONSOLE=y CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -889,6 +941,7 @@ CONFIG_NET_POLL_CONTROLLER=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -948,6 +1001,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -1012,11 +1066,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -1026,7 +1075,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -CONFIG_DS1682=y # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1058,6 +1106,7 @@ CONFIG_GPIO_SYSFS=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1100,6 +1149,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1139,6 +1189,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1178,11 +1229,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1281,6 +1334,7 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set # CONFIG_USB_EHCI_FSL is not set # CONFIG_USB_EHCI_HCD_PPC_OF is not set # CONFIG_USB_OXU210HP_HCD is not set @@ -1407,6 +1461,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set CONFIG_RTC_DRV_RX8581=y @@ -1428,7 +1483,9 @@ CONFIG_RTC_DRV_RX8581=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1653,7 +1710,7 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1680,7 +1737,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 1975d41e0763..4554d9bb03e5 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:48 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:42 2010 # # CONFIG_PPC64 is not set @@ -38,6 +38,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -62,6 +63,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -91,6 +94,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -182,14 +186,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y # CONFIG_FREEZER is not set # @@ -260,6 +291,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -276,8 +308,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -400,6 +430,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -588,9 +619,6 @@ CONFIG_NET_PKTGEN=m CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -719,6 +747,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -730,6 +762,7 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -737,6 +770,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +CONFIG_DS1682=y # CONFIG_C2PORT is not set # @@ -789,7 +823,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -828,6 +864,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -883,15 +920,16 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -908,7 +946,7 @@ CONFIG_SATA_SIL=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -995,8 +1033,11 @@ CONFIG_GIANFAR=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1050,6 +1091,7 @@ CONFIG_NETCONSOLE=y CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -1059,6 +1101,7 @@ CONFIG_NET_POLL_CONTROLLER=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -1117,6 +1160,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -1173,11 +1217,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -1187,7 +1226,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -CONFIG_DS1682=y # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1220,6 +1258,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1262,6 +1301,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1301,6 +1341,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1340,11 +1381,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1443,6 +1486,7 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set # CONFIG_USB_EHCI_FSL is not set # CONFIG_USB_EHCI_HCD_PPC_OF is not set # CONFIG_USB_OXU210HP_HCD is not set @@ -1570,6 +1614,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set CONFIG_RTC_DRV_RX8581=y @@ -1591,7 +1636,9 @@ CONFIG_RTC_DRV_RX8581=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1891,9 +1938,12 @@ CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set # CONFIG_SECURITY_PATH is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index de4d52504fe4..aab3baebab8c 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:45 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:39 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -86,6 +89,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -176,14 +180,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -254,6 +285,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -270,8 +302,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -382,6 +412,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -420,9 +451,6 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -555,6 +583,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -565,6 +597,7 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -572,6 +605,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -671,7 +705,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -710,6 +746,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -765,15 +802,16 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -790,7 +828,7 @@ CONFIG_PATA_ALI=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -838,8 +876,10 @@ CONFIG_ULI526X=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -853,6 +893,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -862,6 +903,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -891,6 +933,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -927,6 +970,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -980,11 +1024,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -994,7 +1033,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1029,11 +1067,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1163,6 +1203,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set @@ -1282,6 +1323,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1303,7 +1345,9 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1606,7 +1650,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index 754a79ba74a9..727a8c8d15b5 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:46 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:40 2010 # # CONFIG_PPC64 is not set @@ -38,6 +38,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -60,6 +61,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -90,6 +93,7 @@ CONFIG_AUDIT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -182,14 +186,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y # CONFIG_FREEZER is not set # @@ -260,6 +291,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -276,8 +308,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -395,6 +425,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -439,9 +470,6 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -483,6 +511,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -494,6 +526,7 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -501,6 +534,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -554,7 +588,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -593,6 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -648,15 +685,16 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -673,7 +711,7 @@ CONFIG_PATA_ALI=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -778,8 +816,11 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -802,6 +843,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -811,6 +853,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -840,6 +883,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -876,6 +920,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -931,11 +976,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -945,7 +985,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -980,11 +1019,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1059,6 +1100,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set @@ -1186,6 +1228,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1312,6 +1355,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1333,7 +1377,9 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1648,7 +1694,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig index 89991f157ae8..4fb04dd2cde3 100644 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:45 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:38 2010 # # CONFIG_PPC64 is not set @@ -38,6 +38,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -61,6 +62,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -90,6 +93,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -162,6 +166,7 @@ CONFIG_HAVE_DMA_API_DEBUG=y # # CONFIG_GCOV_KERNEL is not set CONFIG_SLOW_WORK=y +# CONFIG_SLOW_WORK_DEBUG is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -182,14 +187,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y # CONFIG_FREEZER is not set # @@ -260,6 +292,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -276,8 +309,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -399,6 +430,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -587,9 +619,6 @@ CONFIG_NET_PKTGEN=m CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -717,6 +746,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -727,6 +760,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -734,6 +768,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -786,7 +821,7 @@ CONFIG_DM_ZERO=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -873,8 +908,10 @@ CONFIG_GIANFAR=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -918,6 +955,7 @@ CONFIG_NETCONSOLE=y CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -927,6 +965,7 @@ CONFIG_NET_POLL_CONTROLLER=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -985,6 +1024,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -1041,11 +1081,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -1055,7 +1090,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1101,6 +1135,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1139,6 +1174,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1171,11 +1207,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1281,7 +1319,6 @@ CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_STATS=y CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_FS_POSIX_ACL is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y @@ -1556,8 +1593,12 @@ CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set # CONFIG_SECURITY_PATH is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index 052cf134e018..5c1dc768bbd8 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:04 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:23:58 2010 # # CONFIG_PPC64 is not set @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_REDBOOT=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -82,6 +84,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -161,14 +164,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -242,6 +272,7 @@ CONFIG_BINFMT_ELF=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -258,8 +289,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -373,9 +402,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -546,8 +572,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -567,6 +592,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -615,6 +641,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -637,6 +664,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -898,6 +926,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -943,7 +972,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index 0fb65a85dfdf..72137cd881da 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:05 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:23:59 2010 # # CONFIG_PPC64 is not set @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -61,6 +62,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -92,6 +94,7 @@ CONFIG_AUDIT_TREE=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -173,6 +176,7 @@ CONFIG_HAVE_DMA_API_DEBUG=y # # CONFIG_GCOV_KERNEL is not set CONFIG_SLOW_WORK=y +# CONFIG_SLOW_WORK_DEBUG is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -192,14 +196,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -224,6 +255,8 @@ CONFIG_EMBEDDED6xx=y # CONFIG_PPC_PRPMC2800 is not set CONFIG_PPC_C2K=y CONFIG_MV64X60=y +# CONFIG_GAMECUBE is not set +# CONFIG_WII is not set # CONFIG_AMIGAONE is not set CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set @@ -286,6 +319,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -296,14 +330,12 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -316,6 +348,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_EXTRA_TARGETS="" CONFIG_PM=y # CONFIG_PM_DEBUG is not set +# CONFIG_HIBERNATION is not set # CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -424,6 +457,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -687,10 +721,6 @@ CONFIG_BT_HCIVHCI=m CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # @@ -773,7 +803,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PCI is not set -# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -817,6 +846,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -870,7 +903,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set CONFIG_BLK_DEV_3W_XXXX_RAID=m +# CONFIG_SCSI_HPSA is not set CONFIG_SCSI_3W_9XXX=m +# CONFIG_SCSI_3W_SAS is not set CONFIG_SCSI_ACARD=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m @@ -925,6 +960,7 @@ CONFIG_SCSI_LPFC=m # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -942,7 +978,7 @@ CONFIG_SCSI_LPFC=m # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -1027,8 +1063,11 @@ CONFIG_MV643XX_ETH=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1054,6 +1093,7 @@ CONFIG_NETCONSOLE=m CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -1063,6 +1103,7 @@ CONFIG_NET_POLL_CONTROLLER=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -1121,8 +1162,6 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_N_HDLC is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set # CONFIG_STALDRV is not set # CONFIG_NOZOMI is not set @@ -1140,6 +1179,7 @@ CONFIG_SERIAL_MPSC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -1199,11 +1239,6 @@ CONFIG_I2C_MV64XXX=m # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -1213,7 +1248,6 @@ CONFIG_I2C_MV64XXX=m # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1259,6 +1293,7 @@ CONFIG_SENSORS_GL518SM=m # CONFIG_SENSORS_GL520SM is not set CONFIG_SENSORS_IT87=m # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m @@ -1297,6 +1332,7 @@ CONFIG_SENSORS_W83L785TS=m # CONFIG_SENSORS_W83L786NG is not set CONFIG_SENSORS_W83627HF=m # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1333,7 +1369,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1392,6 +1427,7 @@ CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set @@ -1923,7 +1959,6 @@ CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set # CONFIG_SECURITY_PATH is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y @@ -1934,6 +1969,11 @@ CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_SELINUX=y +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_DAC is not set +CONFIG_DEFAULT_SECURITY="selinux" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index ef5edc7203f5..79105413884e 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:06 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:23:59 2010 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -85,6 +87,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -160,14 +163,41 @@ CONFIG_BLK_DEV_BSG=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -237,6 +267,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -249,8 +280,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -400,9 +429,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -523,6 +549,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set @@ -553,7 +583,7 @@ CONFIG_HAVE_IDE=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -658,8 +688,9 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -670,6 +701,7 @@ CONFIG_WLAN=y # CONFIG_SLIP is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -705,6 +737,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -741,6 +774,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1061,7 +1095,11 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index 73ef9be41280..58f7ca71a59d 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:07 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:00 2010 # # CONFIG_PPC64 is not set @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -54,6 +55,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -81,6 +83,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -159,14 +162,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -241,6 +271,7 @@ CONFIG_8XX_MINIMAL_FPEMU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -257,8 +288,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -372,9 +401,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -545,8 +571,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -591,6 +616,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -851,6 +877,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -893,7 +920,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 63c3e8de8f16..9a0c981277eb 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:08 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:01 2010 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -58,6 +59,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -86,6 +88,7 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -181,14 +184,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -215,6 +245,8 @@ CONFIG_LINKSTATION=y CONFIG_MPC10X_BRIDGE=y CONFIG_MPC10X_OPENPIC=y # CONFIG_MPC10X_STORE_GATHERING is not set +# CONFIG_GAMECUBE is not set +# CONFIG_WII is not set # CONFIG_AMIGAONE is not set CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set @@ -261,6 +293,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -277,8 +310,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -517,10 +548,6 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # @@ -650,6 +677,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -661,6 +692,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -668,6 +700,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -720,7 +753,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -759,6 +794,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -814,15 +850,16 @@ CONFIG_PATA_IT821X=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set CONFIG_PATA_SIL680=y # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -839,7 +876,7 @@ CONFIG_PATA_SIL680=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -934,8 +971,11 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -960,6 +1000,7 @@ CONFIG_NETCONSOLE=y CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -969,6 +1010,7 @@ CONFIG_NET_POLL_CONTROLLER=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -1007,6 +1049,7 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -1039,6 +1082,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -1095,11 +1139,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -1109,7 +1148,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1155,6 +1193,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1193,6 +1232,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1211,11 +1251,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1281,6 +1323,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1454,6 +1497,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1475,7 +1519,9 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1786,7 +1832,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index 520b04a0def9..4c2c877f9363 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:09 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:02 2010 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,7 +60,6 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set -CONFIG_HIBERNATE_32=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -87,6 +87,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -168,14 +169,41 @@ CONFIG_BLK_DEV_BSG=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -208,7 +236,8 @@ CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set CONFIG_PPC_I8259=y CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_ERROR_LOGGING=y +CONFIG_PPC_RTAS_DAEMON=y CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set CONFIG_PPC_MPC106=y @@ -250,6 +279,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -262,8 +292,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -395,9 +423,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -525,6 +550,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -558,7 +587,7 @@ CONFIG_HAVE_IDE=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -625,8 +654,9 @@ CONFIG_FS_ENET_MDIO_FCC=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -637,6 +667,7 @@ CONFIG_WLAN=y # CONFIG_SLIP is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -673,6 +704,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -733,11 +765,6 @@ CONFIG_I2C_CPM=y # # CONFIG_I2C_PARPORT_LIGHT is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -775,6 +802,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -807,11 +835,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1118,7 +1148,11 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig index 43c3c4fcdce3..9e090f2c7e36 100644 --- a/arch/powerpc/configs/mgsuvd_defconfig +++ b/arch/powerpc/configs/mgsuvd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:10 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:03 2010 # # CONFIG_PPC64 is not set @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -53,6 +54,7 @@ CONFIG_OF=y CONFIG_AUDIT_ARCH=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -80,6 +82,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -162,14 +165,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -244,6 +274,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -260,8 +291,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -379,9 +408,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -497,6 +523,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -568,8 +598,7 @@ CONFIG_FS_ENET_HAS_SCC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -614,6 +643,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -863,6 +893,7 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y @@ -887,7 +918,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index d8b364a45944..1315b775a6d2 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:10 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:04 2010 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -58,6 +59,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -85,6 +87,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -167,14 +170,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -199,6 +229,8 @@ CONFIG_MPC7448HPC2=y # CONFIG_PPC_PRPMC2800 is not set # CONFIG_PPC_C2K is not set CONFIG_TSI108_BRIDGE=y +# CONFIG_GAMECUBE is not set +# CONFIG_WII is not set # CONFIG_AMIGAONE is not set CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set @@ -244,6 +276,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -260,8 +293,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -385,9 +416,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -424,6 +452,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -487,7 +519,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -526,6 +560,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -580,15 +615,16 @@ CONFIG_SATA_MV=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -605,7 +641,7 @@ CONFIG_SATA_MV=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -731,8 +767,10 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -746,6 +784,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -755,6 +794,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -806,6 +846,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -1091,7 +1132,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1118,7 +1159,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index 00fad81b6fce..9073778d3575 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:11 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:05 2010 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -85,6 +87,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -161,14 +164,41 @@ CONFIG_BLK_DEV_BSG=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -240,6 +270,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -252,8 +283,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -403,9 +432,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -526,6 +552,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set @@ -556,7 +586,7 @@ CONFIG_HAVE_IDE=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -661,8 +691,9 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -679,6 +710,7 @@ CONFIG_PPP_DEFLATE=y CONFIG_SLHC=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -688,6 +720,7 @@ CONFIG_SLHC=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -740,6 +773,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -763,6 +797,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -799,6 +834,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1131,7 +1167,11 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 64dff21516cb..05bec4835687 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:12 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:06 2010 # # CONFIG_PPC64 is not set @@ -37,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -61,6 +62,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_REDBOOT=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -89,6 +91,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -176,14 +179,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -266,6 +296,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -282,8 +313,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -413,9 +442,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -548,6 +574,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -559,6 +589,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -566,6 +597,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -618,7 +650,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -657,6 +691,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -712,15 +747,16 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -737,7 +773,7 @@ CONFIG_ATA_SFF=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -844,8 +880,11 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -868,6 +907,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -877,6 +917,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -929,6 +970,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -988,11 +1030,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -1002,7 +1039,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1034,6 +1070,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1076,6 +1113,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1115,6 +1153,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1153,11 +1192,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1249,6 +1290,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1542,7 +1584,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1569,7 +1611,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index a12e7ba87a43..8f35f8049c92 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:25:20 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:06 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -62,6 +63,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -92,6 +95,7 @@ CONFIG_AUDIT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -184,14 +188,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set CONFIG_PPC_MSI_BITMAP=y @@ -201,7 +232,7 @@ CONFIG_PPC_MSI_BITMAP=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -220,6 +251,7 @@ CONFIG_TQM8555=y CONFIG_TQM8560=y CONFIG_SBC8548=y # CONFIG_SBC8560 is not set +# CONFIG_P4080_DS is not set CONFIG_TQM85xx=y # CONFIG_IPIC is not set CONFIG_MPIC=y @@ -267,6 +299,7 @@ CONFIG_SWIOTLB=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -283,8 +316,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -405,6 +436,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -449,9 +481,6 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -494,6 +523,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -505,6 +538,7 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -512,6 +546,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -565,7 +600,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -604,6 +641,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -659,15 +697,16 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -684,7 +723,7 @@ CONFIG_PATA_ALI=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -795,8 +834,11 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -820,6 +862,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -829,6 +872,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -858,6 +902,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -896,6 +941,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_SERIAL_QE=m +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -955,11 +1001,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -969,7 +1010,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1002,6 +1042,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1035,11 +1076,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1114,6 +1157,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set @@ -1241,6 +1285,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1347,7 +1392,6 @@ CONFIG_EDAC=y # # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y -CONFIG_EDAC_MPC85XX=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1376,6 +1420,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1397,7 +1442,9 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1731,7 +1778,11 @@ CONFIG_VIRQ_DEBUG=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index cd70b4a4ce01..8755ea3c7f5f 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:26:01 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:07 2010 # # CONFIG_PPC64 is not set @@ -16,9 +16,9 @@ CONFIG_PPC_85xx=y # CONFIG_E200 is not set CONFIG_E500=y # CONFIG_PPC_E500MC is not set +CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y @@ -40,6 +40,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -63,6 +64,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -93,6 +96,7 @@ CONFIG_AUDIT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -187,14 +191,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y # CONFIG_FREEZER is not set CONFIG_PPC_MSI_BITMAP=y @@ -204,7 +235,7 @@ CONFIG_PPC_MSI_BITMAP=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y +CONFIG_FSL_SOC_BOOKE=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -223,6 +254,7 @@ CONFIG_TQM8555=y CONFIG_TQM8560=y CONFIG_SBC8548=y # CONFIG_SBC8560 is not set +# CONFIG_P4080_DS is not set CONFIG_TQM85xx=y # CONFIG_IPIC is not set CONFIG_MPIC=y @@ -271,6 +303,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -287,8 +320,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -409,6 +440,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -453,9 +485,6 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -498,6 +527,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -509,6 +542,7 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -516,6 +550,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -569,7 +604,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -608,6 +645,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -663,15 +701,16 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -688,7 +727,7 @@ CONFIG_PATA_ALI=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -799,8 +838,11 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -824,6 +866,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -833,6 +876,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -862,6 +906,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -900,6 +945,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_SERIAL_QE=m +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -959,11 +1005,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -973,7 +1014,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1006,6 +1046,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1039,11 +1080,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1118,6 +1161,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set @@ -1245,6 +1289,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1351,7 +1396,6 @@ CONFIG_EDAC=y # # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y -CONFIG_EDAC_MPC85XX=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1380,6 +1424,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1401,7 +1446,9 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1735,7 +1782,11 @@ CONFIG_VIRQ_DEBUG=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 40d6f0568ca5..3f6b11b6f4f3 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:15 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:08 2010 # # CONFIG_PPC64 is not set @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -53,6 +54,7 @@ CONFIG_OF=y CONFIG_AUDIT_ARCH=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -80,6 +82,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -158,14 +161,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -240,6 +270,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -256,8 +287,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -375,9 +404,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -407,6 +433,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set @@ -485,8 +515,7 @@ CONFIG_NETDEV_1000=y # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -506,6 +535,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -554,6 +584,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -576,6 +607,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -855,6 +887,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y @@ -876,7 +909,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index 5b3abb42ae30..41884c97a4f3 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:16 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:09 2010 # # CONFIG_PPC64 is not set @@ -38,6 +38,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -61,6 +62,8 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -91,6 +94,7 @@ CONFIG_AUDIT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -183,14 +187,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y # CONFIG_FREEZER is not set # @@ -221,7 +252,7 @@ CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set CONFIG_PPC_I8259=y # CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set +CONFIG_MMIO_NVRAM=y # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set @@ -262,6 +293,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -278,8 +310,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -397,6 +427,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -441,9 +472,6 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -486,6 +514,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -497,6 +529,7 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -504,6 +537,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -557,7 +591,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -596,6 +632,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -651,15 +688,16 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -676,7 +714,7 @@ CONFIG_PATA_ALI=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -781,8 +819,11 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -805,6 +846,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -814,6 +856,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -843,6 +886,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -879,6 +923,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -935,11 +980,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -949,7 +989,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -982,6 +1021,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1015,11 +1055,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1094,6 +1136,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set @@ -1221,6 +1264,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1348,6 +1392,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1369,7 +1414,9 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1684,7 +1731,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index 1da3488a603d..6b9e6bd2c98d 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:17 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:10 2010 # # CONFIG_PPC64 is not set @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -54,6 +55,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -81,6 +83,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -159,14 +162,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -248,6 +278,7 @@ CONFIG_8XX_MINIMAL_FPEMU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -264,8 +295,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -379,9 +408,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -556,8 +582,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -602,6 +627,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -862,6 +888,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -904,7 +931,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index b7911216af78..5d06f2cb8e5e 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:17 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:11 2010 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -59,6 +60,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -85,6 +87,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -165,14 +168,41 @@ CONFIG_BLK_DEV_BSG=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -243,6 +273,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -255,8 +286,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -407,9 +436,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -530,6 +556,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set @@ -616,7 +646,7 @@ CONFIG_IDE_PROC_FS=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -721,8 +751,9 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -739,6 +770,7 @@ CONFIG_PPP_DEFLATE=y CONFIG_SLHC=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -748,6 +780,7 @@ CONFIG_SLHC=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -802,6 +835,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -825,6 +859,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -861,6 +896,7 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -955,10 +991,12 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_ETH_EEM is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_MASS_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_MULTI is not set # # OTG and related infrastructure @@ -1248,7 +1286,11 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index ef50ce45d50b..57ab5748a34d 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:18 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:12 2010 # # CONFIG_PPC64 is not set @@ -38,6 +38,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -60,6 +61,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -88,6 +90,7 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -175,14 +178,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -207,6 +237,8 @@ CONFIG_EMBEDDED6xx=y CONFIG_PPC_PRPMC2800=y # CONFIG_PPC_C2K is not set CONFIG_MV64X60=y +# CONFIG_GAMECUBE is not set +# CONFIG_WII is not set # CONFIG_AMIGAONE is not set CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set @@ -252,6 +284,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -268,8 +301,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -394,9 +425,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -518,6 +546,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -529,6 +561,7 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -536,6 +569,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -641,7 +675,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -680,6 +716,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -734,15 +771,16 @@ CONFIG_SATA_MV=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -759,7 +797,7 @@ CONFIG_SATA_MV=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -886,8 +924,11 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -910,6 +951,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -919,6 +961,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -973,6 +1016,7 @@ CONFIG_SERIAL_MPSC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -1029,11 +1073,6 @@ CONFIG_I2C_MV64XXX=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -1042,7 +1081,6 @@ CONFIG_I2C_MV64XXX=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1088,6 +1126,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1126,6 +1165,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1144,11 +1184,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1250,6 +1292,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set @@ -1362,6 +1405,7 @@ CONFIG_RTC_DRV_MAX6900=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1383,7 +1427,9 @@ CONFIG_RTC_DRV_MAX6900=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1626,7 +1672,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index 524263158fc0..f2f832161463 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Thu Nov 5 08:20:19 2009 +# Linux kernel version: 2.6.33-rc3 +# Wed Jan 6 09:24:13 2010 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -58,6 +59,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -85,6 +87,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -167,14 +170,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -201,6 +231,8 @@ CONFIG_STORCENTER=y CONFIG_MPC10X_BRIDGE=y CONFIG_MPC10X_OPENPIC=y # CONFIG_MPC10X_STORE_GATHERING is not set +# CONFIG_GAMECUBE is not set +# CONFIG_WII is not set # CONFIG_AMIGAONE is not set CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set @@ -246,6 +278,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -262,8 +295,6 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y @@ -384,9 +415,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -507,6 +535,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -515,6 +547,7 @@ CONFIG_BLK_DEV=y # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -522,6 +555,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -628,7 +662,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -666,6 +702,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -695,7 +732,7 @@ CONFIG_MD_RAID6_PQ=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -741,8 +778,11 @@ CONFIG_R8169=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -765,6 +805,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -805,6 +846,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -861,11 +903,6 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -875,7 +912,6 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -910,11 +946,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -963,6 +1001,7 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_XPS_USB_HCD_XILINX is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set @@ -1087,6 +1126,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1108,7 +1148,9 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1322,7 +1364,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set @@ -1349,7 +1391,11 @@ CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y From 077639f443294a25b16e4040ca06a1611700a4ae Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Tue, 13 Oct 2009 15:08:54 +0000 Subject: [PATCH 0412/1626] Davinci VPFE Capture: Take i2c adapter id through platform data The I2C adapter ID is actually depends on Board and may vary, Davinci uses id=1, but in case of AM3517 id=3. So modified respective davinci board files. Signed-off-by: Vaibhav Hiremath Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm355-evm.c | 1 + arch/arm/mach-davinci/board-dm644x-evm.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index a9b650dcc172..077ecf4fecda 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -236,6 +236,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = { static struct vpfe_config vpfe_cfg = { .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), + .i2c_adapter_id = 1, .sub_devs = vpfe_sub_devs, .card_name = "DM355 EVM", .ccdc = "DM355 CCDC", diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index fd0398bc6db3..e9612cf727b7 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -247,6 +247,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = { static struct vpfe_config vpfe_cfg = { .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), + .i2c_adapter_id = 1, .sub_devs = vpfe_sub_devs, .card_name = "DM6446 EVM", .ccdc = "DM6446 CCDC", From 2d3f595016f982294c1669ee87aa91179d88502b Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Mon, 16 Nov 2009 17:21:30 +0530 Subject: [PATCH 0413/1626] davinci: cp_intc: provide set_wake function There is nothing special to be done for interrupts which can wakeup the device from sleep on CP-INTC, but not having a set_wake implemented prevents use of common drivers which expect this function to be implemented for all wakeup interrupt sources. This patch fixes the issue encountered when using the omap-rtc driver on DA850. On DA850 the RTC alarm interrupt is used to wake up the SoC from deep sleep mode. Without this patch, the disable_irq_wake throws an unbalanced wake disable warning while resuming because the previous enable call fails for lack of set_wake implementation. Signed-off-by: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/cp_intc.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c index 52b287cf3a42..37311d1830eb 100644 --- a/arch/arm/mach-davinci/cp_intc.c +++ b/arch/arm/mach-davinci/cp_intc.c @@ -81,12 +81,23 @@ static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type) return 0; } +/* + * Faking this allows us to to work with suspend functions of + * generic drivers which call {enable|disable}_irq_wake for + * wake up interrupt sources (eg RTC on DA850). + */ +static int cp_intc_set_wake(unsigned int irq, unsigned int on) +{ + return 0; +} + static struct irq_chip cp_intc_irq_chip = { .name = "cp_intc", .ack = cp_intc_ack_irq, .mask = cp_intc_mask_irq, .unmask = cp_intc_unmask_irq, .set_type = cp_intc_set_irq_type, + .set_wake = cp_intc_set_wake, }; void __init cp_intc_init(void __iomem *base, unsigned short num_irq, From 75c99bb0006ee065b4e2995078d779418b0fab54 Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Mon, 16 Nov 2009 17:21:31 +0530 Subject: [PATCH 0414/1626] davinci: da8xx/omap-l1: mark RTC as a wakeup source On da850, RTC alarm is a wakeup source from deep sleep. Mark it as a wakeup source after the rtc platform device is registered. Without this patch, the rtc-omap driver suspends the RTC during the suspend sequence and hence it cannot wakeup the SoC. Signed-off-by: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/devices-da8xx.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index dd2d32c4ce86..a5105f03fd86 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -481,11 +481,18 @@ static struct platform_device da8xx_rtc_device = { int da8xx_register_rtc(void) { + int ret; + /* Unlock the rtc's registers */ __raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c)); __raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70)); - return platform_device_register(&da8xx_rtc_device); + ret = platform_device_register(&da8xx_rtc_device); + if (!ret) + /* Atleast on DA850, RTC is a wakeup source */ + device_init_wakeup(&da8xx_rtc_device.dev, true); + + return ret; } static struct resource da8xx_cpuidle_resources[] = { From ae88e05a5adb5f6da2d1e1a852bea8c88cb2c9cb Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Thu, 19 Nov 2009 15:34:01 +0530 Subject: [PATCH 0415/1626] davinci: enable ARCH_HAS_HOLES_MEMORYMODEL for DaVinci All DaVinci platforms include a DSP or co-processor for audio/video acceleration. While creating memory for the DSP/co-processor, system integrator can end up creating a hole in the memory map of the sort: This sort of configuration needs ARCH_HAS_HOLES_MEMORYMODEL enabled. See further details see this discussion on ARM linux mailing list: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15262.html The patch is boot tested on OMAP-L138, DM6446 and DM355 EVMs Signed-off-by: Sekhar Nori CC: Sriramakrishnan CC: Khasim Syed Mohammed Signed-off-by: Kevin Hilman --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 233a222752c0..4f8760d7b7a7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -688,6 +688,7 @@ config ARCH_DAVINCI select HAVE_IDE select COMMON_CLKDEV select GENERIC_ALLOCATOR + select ARCH_HAS_HOLES_MEMORYMODEL help Support for TI's DaVinci platform. From c92b29ec4a7a197199b8b937b909d80dc79d8e5b Mon Sep 17 00:00:00 2001 From: Miguel Aguilar Date: Fri, 13 Nov 2009 13:44:23 -0600 Subject: [PATCH 0416/1626] DaVinci: DM365: Add the device_enable for the DaVinci Keyscan Adds the device_enable function to the DaVinci Keyscan platform data to setup the PINMUX configuration. It also removes #ifdef from the DM365 EVM board in order to load it properly as a module. Signed-off-by: Miguel Aguilar Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm365-evm.c | 11 ++++++----- arch/arm/mach-davinci/dm365.c | 1 - 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 289fe1b7d25a..b476395d2cd4 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -192,7 +192,11 @@ static struct davinci_i2c_platform_data i2c_pdata = { .bus_delay = 0 /* usec */, }; -#ifdef CONFIG_KEYBOARD_DAVINCI +static int dm365evm_keyscan_enable(struct device *dev) +{ + return davinci_cfg_reg(DM365_KEYSCAN); +} + static unsigned short dm365evm_keymap[] = { KEY_KP2, KEY_LEFT, @@ -214,6 +218,7 @@ static unsigned short dm365evm_keymap[] = { }; static struct davinci_ks_platform_data dm365evm_ks_data = { + .device_enable = dm365evm_keyscan_enable, .keymap = dm365evm_keymap, .keymapsize = ARRAY_SIZE(dm365evm_keymap), .rep = 1, @@ -222,7 +227,6 @@ static struct davinci_ks_platform_data dm365evm_ks_data = { .interval = 0x2, .matrix_type = DAVINCI_KEYSCAN_MATRIX_4X4, }; -#endif static int cpld_mmc_get_cd(int module) { @@ -511,10 +515,7 @@ static __init void dm365_evm_init(void) dm365_init_asp(&dm365_evm_snd_data); dm365_init_rtc(); - -#ifdef CONFIG_KEYBOARD_DAVINCI dm365_init_ks(&dm365evm_ks_data); -#endif } static __init void dm365_evm_irq_init(void) diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 2ec619ec1657..f53735cb922e 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -993,7 +993,6 @@ void __init dm365_init_asp(struct snd_platform_data *pdata) void __init dm365_init_ks(struct davinci_ks_platform_data *pdata) { - davinci_cfg_reg(DM365_KEYSCAN); dm365_ks_device.dev.platform_data = pdata; platform_device_register(&dm365_ks_device); } From 76446cac68568fc7f5168a27deaf803ed22a4360 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 17 Dec 2009 22:05:42 -0500 Subject: [PATCH 0417/1626] drm/i915: execbuf2 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds a new execbuf ioctl, execbuf2, for use by clients that want to control fence register allocation more finely. The buffer passed in to the new ioctl includes a new relocation type to indicate whether a given object needs a fence register assigned for the command buffer in question. Compatibility with the existing execbuf ioctl is implemented in terms of the new code, preserving the assumption that fence registers are required for pre-965 rendering commands. Signed-off-by: Jesse Barnes [ickle: Remove pre-emptive clear_fence_reg()] Signed-off-by: Chris Wilson Signed-off-by: Kristian Høgsberg [anholt: Removed dmesg spam] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 7 +- drivers/gpu/drm/i915/i915_drv.h | 5 + drivers/gpu/drm/i915/i915_gem.c | 239 +++++++++++++++++++------ drivers/gpu/drm/i915/i915_gem_tiling.c | 48 +++-- include/drm/i915_drm.h | 54 ++++++ 5 files changed, 274 insertions(+), 79 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index e3e5d5094232..d67be655c532 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -813,9 +813,13 @@ static int i915_getparam(struct drm_device *dev, void *data, case I915_PARAM_HAS_PAGEFLIPPING: value = 1; break; + case I915_PARAM_HAS_EXECBUF2: + /* depends on GEM */ + value = dev_priv->has_gem; + break; default: DRM_DEBUG_DRIVER("Unknown parameter %d\n", - param->param); + param->param); return -EINVAL; } @@ -1646,6 +1650,7 @@ struct drm_ioctl_desc i915_ioctls[] = { DRM_IOCTL_DEF(DRM_I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_I915_GEM_INIT, i915_gem_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH), + DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH), DRM_IOCTL_DEF(DRM_I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH), diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 9a05f1a01025..7eb4ad51034d 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -815,6 +815,8 @@ int i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); int i915_gem_execbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv); +int i915_gem_execbuffer2(struct drm_device *dev, void *data, + struct drm_file *file_priv); int i915_gem_pin_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); int i915_gem_unpin_ioctl(struct drm_device *dev, void *data, @@ -881,6 +883,9 @@ void i915_gem_shrinker_exit(void); void i915_gem_detect_bit_6_swizzle(struct drm_device *dev); void i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj); void i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj); +bool i915_tiling_ok(struct drm_device *dev, int stride, int size, + int tiling_mode); +bool i915_obj_fenceable(struct drm_device *dev, struct drm_gem_object *obj); /* i915_gem_debug.c */ void i915_gem_dump_object(struct drm_gem_object *obj, int len, diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 9e81a0ddafac..0330c3aa8032 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3199,7 +3199,7 @@ i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, static int i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, struct drm_file *file_priv, - struct drm_i915_gem_exec_object *entry, + struct drm_i915_gem_exec_object2 *entry, struct drm_i915_gem_relocation_entry *relocs) { struct drm_device *dev = obj->dev; @@ -3207,12 +3207,35 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, struct drm_i915_gem_object *obj_priv = obj->driver_private; int i, ret; void __iomem *reloc_page; + bool need_fence; + + need_fence = entry->flags & EXEC_OBJECT_NEEDS_FENCE && + obj_priv->tiling_mode != I915_TILING_NONE; + + /* Check fence reg constraints and rebind if necessary */ + if (need_fence && !i915_obj_fenceable(dev, obj)) + i915_gem_object_unbind(obj); /* Choose the GTT offset for our buffer and put it there. */ ret = i915_gem_object_pin(obj, (uint32_t) entry->alignment); if (ret) return ret; + /* + * Pre-965 chips need a fence register set up in order to + * properly handle blits to/from tiled surfaces. + */ + if (need_fence) { + ret = i915_gem_object_get_fence_reg(obj); + if (ret != 0) { + if (ret != -EBUSY && ret != -ERESTARTSYS) + DRM_ERROR("Failure to install fence: %d\n", + ret); + i915_gem_object_unpin(obj); + return ret; + } + } + entry->offset = obj_priv->gtt_offset; /* Apply the relocations, using the GTT aperture to avoid cache @@ -3374,7 +3397,7 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, */ static int i915_dispatch_gem_execbuffer(struct drm_device *dev, - struct drm_i915_gem_execbuffer *exec, + struct drm_i915_gem_execbuffer2 *exec, struct drm_clip_rect *cliprects, uint64_t exec_offset) { @@ -3464,7 +3487,7 @@ i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file_priv) } static int -i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list, +i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object2 *exec_list, uint32_t buffer_count, struct drm_i915_gem_relocation_entry **relocs) { @@ -3479,8 +3502,10 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list, } *relocs = drm_calloc_large(reloc_count, sizeof(**relocs)); - if (*relocs == NULL) + if (*relocs == NULL) { + DRM_ERROR("failed to alloc relocs, count %d\n", reloc_count); return -ENOMEM; + } for (i = 0; i < buffer_count; i++) { struct drm_i915_gem_relocation_entry __user *user_relocs; @@ -3504,7 +3529,7 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list, } static int -i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object *exec_list, +i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object2 *exec_list, uint32_t buffer_count, struct drm_i915_gem_relocation_entry *relocs) { @@ -3537,7 +3562,7 @@ err: } static int -i915_gem_check_execbuffer (struct drm_i915_gem_execbuffer *exec, +i915_gem_check_execbuffer (struct drm_i915_gem_execbuffer2 *exec, uint64_t exec_offset) { uint32_t exec_start, exec_len; @@ -3590,18 +3615,18 @@ i915_gem_wait_for_pending_flip(struct drm_device *dev, } int -i915_gem_execbuffer(struct drm_device *dev, void *data, - struct drm_file *file_priv) +i915_gem_do_execbuffer(struct drm_device *dev, void *data, + struct drm_file *file_priv, + struct drm_i915_gem_execbuffer2 *args, + struct drm_i915_gem_exec_object2 *exec_list) { drm_i915_private_t *dev_priv = dev->dev_private; - struct drm_i915_gem_execbuffer *args = data; - struct drm_i915_gem_exec_object *exec_list = NULL; struct drm_gem_object **object_list = NULL; struct drm_gem_object *batch_obj; struct drm_i915_gem_object *obj_priv; struct drm_clip_rect *cliprects = NULL; struct drm_i915_gem_relocation_entry *relocs; - int ret, ret2, i, pinned = 0; + int ret = 0, ret2, i, pinned = 0; uint64_t exec_offset; uint32_t seqno, flush_domains, reloc_index; int pin_tries, flips; @@ -3615,25 +3640,13 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, DRM_ERROR("execbuf with %d buffers\n", args->buffer_count); return -EINVAL; } - /* Copy in the exec list from userland */ - exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count); object_list = drm_malloc_ab(sizeof(*object_list), args->buffer_count); - if (exec_list == NULL || object_list == NULL) { - DRM_ERROR("Failed to allocate exec or object list " - "for %d buffers\n", + if (object_list == NULL) { + DRM_ERROR("Failed to allocate object list for %d buffers\n", args->buffer_count); ret = -ENOMEM; goto pre_mutex_err; } - ret = copy_from_user(exec_list, - (struct drm_i915_relocation_entry __user *) - (uintptr_t) args->buffers_ptr, - sizeof(*exec_list) * args->buffer_count); - if (ret != 0) { - DRM_ERROR("copy %d exec entries failed %d\n", - args->buffer_count, ret); - goto pre_mutex_err; - } if (args->num_cliprects != 0) { cliprects = kcalloc(args->num_cliprects, sizeof(*cliprects), @@ -3885,20 +3898,6 @@ err: mutex_unlock(&dev->struct_mutex); - if (!ret) { - /* Copy the new buffer offsets back to the user's exec list. */ - ret = copy_to_user((struct drm_i915_relocation_entry __user *) - (uintptr_t) args->buffers_ptr, - exec_list, - sizeof(*exec_list) * args->buffer_count); - if (ret) { - ret = -EFAULT; - DRM_ERROR("failed to copy %d exec entries " - "back to user (%d)\n", - args->buffer_count, ret); - } - } - /* Copy the updated relocations out regardless of current error * state. Failure to update the relocs would mean that the next * time userland calls execbuf, it would do so with presumed offset @@ -3915,12 +3914,158 @@ err: pre_mutex_err: drm_free_large(object_list); - drm_free_large(exec_list); kfree(cliprects); return ret; } +/* + * Legacy execbuffer just creates an exec2 list from the original exec object + * list array and passes it to the real function. + */ +int +i915_gem_execbuffer(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_execbuffer *args = data; + struct drm_i915_gem_execbuffer2 exec2; + struct drm_i915_gem_exec_object *exec_list = NULL; + struct drm_i915_gem_exec_object2 *exec2_list = NULL; + int ret, i; + +#if WATCH_EXEC + DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", + (int) args->buffers_ptr, args->buffer_count, args->batch_len); +#endif + + if (args->buffer_count < 1) { + DRM_ERROR("execbuf with %d buffers\n", args->buffer_count); + return -EINVAL; + } + + /* Copy in the exec list from userland */ + exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count); + exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count); + if (exec_list == NULL || exec2_list == NULL) { + DRM_ERROR("Failed to allocate exec list for %d buffers\n", + args->buffer_count); + drm_free_large(exec_list); + drm_free_large(exec2_list); + return -ENOMEM; + } + ret = copy_from_user(exec_list, + (struct drm_i915_relocation_entry __user *) + (uintptr_t) args->buffers_ptr, + sizeof(*exec_list) * args->buffer_count); + if (ret != 0) { + DRM_ERROR("copy %d exec entries failed %d\n", + args->buffer_count, ret); + drm_free_large(exec_list); + drm_free_large(exec2_list); + return -EFAULT; + } + + for (i = 0; i < args->buffer_count; i++) { + exec2_list[i].handle = exec_list[i].handle; + exec2_list[i].relocation_count = exec_list[i].relocation_count; + exec2_list[i].relocs_ptr = exec_list[i].relocs_ptr; + exec2_list[i].alignment = exec_list[i].alignment; + exec2_list[i].offset = exec_list[i].offset; + if (!IS_I965G(dev)) + exec2_list[i].flags = EXEC_OBJECT_NEEDS_FENCE; + else + exec2_list[i].flags = 0; + } + + exec2.buffers_ptr = args->buffers_ptr; + exec2.buffer_count = args->buffer_count; + exec2.batch_start_offset = args->batch_start_offset; + exec2.batch_len = args->batch_len; + exec2.DR1 = args->DR1; + exec2.DR4 = args->DR4; + exec2.num_cliprects = args->num_cliprects; + exec2.cliprects_ptr = args->cliprects_ptr; + exec2.flags = 0; + + ret = i915_gem_do_execbuffer(dev, data, file_priv, &exec2, exec2_list); + if (!ret) { + /* Copy the new buffer offsets back to the user's exec list. */ + for (i = 0; i < args->buffer_count; i++) + exec_list[i].offset = exec2_list[i].offset; + /* ... and back out to userspace */ + ret = copy_to_user((struct drm_i915_relocation_entry __user *) + (uintptr_t) args->buffers_ptr, + exec_list, + sizeof(*exec_list) * args->buffer_count); + if (ret) { + ret = -EFAULT; + DRM_ERROR("failed to copy %d exec entries " + "back to user (%d)\n", + args->buffer_count, ret); + } + } else { + DRM_ERROR("i915_gem_do_execbuffer returns %d\n", ret); + } + + drm_free_large(exec_list); + drm_free_large(exec2_list); + return ret; +} + +int +i915_gem_execbuffer2(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_execbuffer2 *args = data; + struct drm_i915_gem_exec_object2 *exec2_list = NULL; + int ret; + +#if WATCH_EXEC + DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", + (int) args->buffers_ptr, args->buffer_count, args->batch_len); +#endif + + if (args->buffer_count < 1) { + DRM_ERROR("execbuf2 with %d buffers\n", args->buffer_count); + return -EINVAL; + } + + exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count); + if (exec2_list == NULL) { + DRM_ERROR("Failed to allocate exec list for %d buffers\n", + args->buffer_count); + return -ENOMEM; + } + ret = copy_from_user(exec2_list, + (struct drm_i915_relocation_entry __user *) + (uintptr_t) args->buffers_ptr, + sizeof(*exec2_list) * args->buffer_count); + if (ret != 0) { + DRM_ERROR("copy %d exec entries failed %d\n", + args->buffer_count, ret); + drm_free_large(exec2_list); + return -EFAULT; + } + + ret = i915_gem_do_execbuffer(dev, data, file_priv, args, exec2_list); + if (!ret) { + /* Copy the new buffer offsets back to the user's exec list. */ + ret = copy_to_user((struct drm_i915_relocation_entry __user *) + (uintptr_t) args->buffers_ptr, + exec2_list, + sizeof(*exec2_list) * args->buffer_count); + if (ret) { + ret = -EFAULT; + DRM_ERROR("failed to copy %d exec entries " + "back to user (%d)\n", + args->buffer_count, ret); + } + } + + drm_free_large(exec2_list); + return ret; +} + int i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment) { @@ -3934,19 +4079,7 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment) if (ret) return ret; } - /* - * Pre-965 chips need a fence register set up in order to - * properly handle tiled surfaces. - */ - if (!IS_I965G(dev) && obj_priv->tiling_mode != I915_TILING_NONE) { - ret = i915_gem_object_get_fence_reg(obj); - if (ret != 0) { - if (ret != -EBUSY && ret != -ERESTARTSYS) - DRM_ERROR("Failure to install fence: %d\n", - ret); - return ret; - } - } + obj_priv->pin_count++; /* If the object is not active and not pending a flush, diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 30d6af6c09bb..df278b2685bf 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -304,35 +304,39 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) /** - * Returns the size of the fence for a tiled object of the given size. + * Returns whether an object is currently fenceable. If not, it may need + * to be unbound and have its pitch adjusted. */ -static int -i915_get_fence_size(struct drm_device *dev, int size) +bool +i915_obj_fenceable(struct drm_device *dev, struct drm_gem_object *obj) { - int i; - int start; + struct drm_i915_gem_object *obj_priv = obj->driver_private; if (IS_I965G(dev)) { /* The 965 can have fences at any page boundary. */ - return ALIGN(size, 4096); + if (obj->size & 4095) + return false; + return true; + } else if (IS_I9XX(dev)) { + if (obj_priv->gtt_offset & ~I915_FENCE_START_MASK) + return false; } else { - /* Align the size to a power of two greater than the smallest - * fence size. - */ - if (IS_I9XX(dev)) - start = 1024 * 1024; - else - start = 512 * 1024; - - for (i = start; i < size; i <<= 1) - ; - - return i; + if (obj_priv->gtt_offset & ~I830_FENCE_START_MASK) + return false; } + + /* Power of two sized... */ + if (obj->size & (obj->size - 1)) + return false; + + /* Objects must be size aligned as well */ + if (obj_priv->gtt_offset & (obj->size - 1)) + return false; + return true; } /* Check pitch constriants for all chips & tiling formats */ -static bool +bool i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) { int tile_width; @@ -384,12 +388,6 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) if (stride & (stride - 1)) return false; - /* We don't 0handle the aperture area covered by the fence being bigger - * than the object size. - */ - if (i915_get_fence_size(dev, size) != size) - return false; - return true; } diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h index ec3f5e80a5df..b64a8d7cdf6d 100644 --- a/include/drm/i915_drm.h +++ b/include/drm/i915_drm.h @@ -188,6 +188,7 @@ typedef struct _drm_i915_sarea { #define DRM_I915_GEM_MADVISE 0x26 #define DRM_I915_OVERLAY_PUT_IMAGE 0x27 #define DRM_I915_OVERLAY_ATTRS 0x28 +#define DRM_I915_GEM_EXECBUFFER2 0x29 #define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t) #define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH) @@ -207,6 +208,7 @@ typedef struct _drm_i915_sarea { #define DRM_IOCTL_I915_VBLANK_SWAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t) #define DRM_IOCTL_I915_GEM_INIT DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_INIT, struct drm_i915_gem_init) #define DRM_IOCTL_I915_GEM_EXECBUFFER DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER, struct drm_i915_gem_execbuffer) +#define DRM_IOCTL_I915_GEM_EXECBUFFER2 DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2, struct drm_i915_gem_execbuffer2) #define DRM_IOCTL_I915_GEM_PIN DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin) #define DRM_IOCTL_I915_GEM_UNPIN DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin) #define DRM_IOCTL_I915_GEM_BUSY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy) @@ -272,6 +274,7 @@ typedef struct drm_i915_irq_wait { #define I915_PARAM_NUM_FENCES_AVAIL 6 #define I915_PARAM_HAS_OVERLAY 7 #define I915_PARAM_HAS_PAGEFLIPPING 8 +#define I915_PARAM_HAS_EXECBUF2 9 typedef struct drm_i915_getparam { int param; @@ -567,6 +570,57 @@ struct drm_i915_gem_execbuffer { __u64 cliprects_ptr; }; +struct drm_i915_gem_exec_object2 { + /** + * User's handle for a buffer to be bound into the GTT for this + * operation. + */ + __u32 handle; + + /** Number of relocations to be performed on this buffer */ + __u32 relocation_count; + /** + * Pointer to array of struct drm_i915_gem_relocation_entry containing + * the relocations to be performed in this buffer. + */ + __u64 relocs_ptr; + + /** Required alignment in graphics aperture */ + __u64 alignment; + + /** + * Returned value of the updated offset of the object, for future + * presumed_offset writes. + */ + __u64 offset; + +#define EXEC_OBJECT_NEEDS_FENCE (1<<0) + __u64 flags; + __u64 rsvd1; + __u64 rsvd2; +}; + +struct drm_i915_gem_execbuffer2 { + /** + * List of gem_exec_object2 structs + */ + __u64 buffers_ptr; + __u32 buffer_count; + + /** Offset in the batchbuffer to start execution from. */ + __u32 batch_start_offset; + /** Bytes used in batchbuffer from batch_start_offset */ + __u32 batch_len; + __u32 DR1; + __u32 DR4; + __u32 num_cliprects; + /** This is a struct drm_clip_rect *cliprects */ + __u64 cliprects_ptr; + __u64 flags; /* currently unused */ + __u64 rsvd1; + __u64 rsvd2; +}; + struct drm_i915_gem_pin { /** Handle of the buffer to be pinned. */ __u32 handle; From 1d3c36ad4122651018599d4e3c9be0cccfbfb939 Mon Sep 17 00:00:00 2001 From: Andrew Lutomirski Date: Mon, 21 Dec 2009 10:10:22 -0500 Subject: [PATCH 0418/1626] drm/i915: Fix RC6 suspend/resume We restored RC6 twice on resume, even with modesetting off. Instead, only restore it once and skip RC6 initialization entirely in non-KMS mode. Signed-off-by: Andy Lutomirski Tested-by: Jeff Chua Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 2 -- drivers/gpu/drm/i915/i915_suspend.c | 12 ------------ drivers/gpu/drm/i915/intel_display.c | 2 +- 3 files changed, 1 insertion(+), 15 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 7eb4ad51034d..29dd67626967 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -307,8 +307,6 @@ typedef struct drm_i915_private { u32 saveDSPACNTR; u32 saveDSPBCNTR; u32 saveDSPARB; - u32 saveRENDERSTANDBY; - u32 savePWRCTXA; u32 saveHWS; u32 savePIPEACONF; u32 savePIPEBCONF; diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index d5ebb00a9d49..a3b90c9561dc 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -732,12 +732,6 @@ int i915_save_state(struct drm_device *dev) pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); - /* Render Standby */ - if (I915_HAS_RC6(dev)) { - dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY); - dev_priv->savePWRCTXA = I915_READ(PWRCTXA); - } - /* Hardware status page */ dev_priv->saveHWS = I915_READ(HWS_PGA); @@ -793,12 +787,6 @@ int i915_restore_state(struct drm_device *dev) pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB); - /* Render Standby */ - if (I915_HAS_RC6(dev)) { - I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY); - I915_WRITE(PWRCTXA, dev_priv->savePWRCTXA); - } - /* Hardware status page */ I915_WRITE(HWS_PGA, dev_priv->saveHWS); diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c21dede6461c..089b1df5448b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4593,7 +4593,7 @@ void intel_init_clock_gating(struct drm_device *dev) * GPU can automatically power down the render unit if given a page * to save state. */ - if (I915_HAS_RC6(dev)) { + if (I915_HAS_RC6(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) { struct drm_gem_object *pwrctx; struct drm_i915_gem_object *obj_priv; int ret; From cda9d05c499093c67b4a376a15009923acc2127a Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 17 Dec 2009 11:11:13 -0800 Subject: [PATCH 0419/1626] drm/i915: remove render reclock support This code generally fails to adjust the render clock, and when it does, it conflicts with some other register settings and can cause problems. So remove this code altogether. I'm reworking it now to do the right thing, but the only bit it will share is the VBT check for whether reclocking is supported, so I'm leaving that bit. Reverts most of 652c393a3368af84359da37c45afc35a91144960 ("add dynamic clock frequency control"), though for many the regressions showed up in the later 181a5336d6cc836f05507410d66988c483ad0154 ("Fix render reclock availability detection"). Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 132 +-------------------------- 1 file changed, 2 insertions(+), 130 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 089b1df5448b..9187a1736b01 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3779,125 +3779,6 @@ static void intel_gpu_idle_timer(unsigned long arg) queue_work(dev_priv->wq, &dev_priv->idle_work); } -void intel_increase_renderclock(struct drm_device *dev, bool schedule) -{ - drm_i915_private_t *dev_priv = dev->dev_private; - - if (IS_IRONLAKE(dev)) - return; - - if (!dev_priv->render_reclock_avail) { - DRM_DEBUG_DRIVER("not reclocking render clock\n"); - return; - } - - /* Restore render clock frequency to original value */ - if (IS_G4X(dev) || IS_I9XX(dev)) - pci_write_config_word(dev->pdev, GCFGC, dev_priv->orig_clock); - else if (IS_I85X(dev)) - pci_write_config_word(dev->pdev, HPLLCC, dev_priv->orig_clock); - DRM_DEBUG_DRIVER("increasing render clock frequency\n"); - - /* Schedule downclock */ - if (schedule) - mod_timer(&dev_priv->idle_timer, jiffies + - msecs_to_jiffies(GPU_IDLE_TIMEOUT)); -} - -void intel_decrease_renderclock(struct drm_device *dev) -{ - drm_i915_private_t *dev_priv = dev->dev_private; - - if (IS_IRONLAKE(dev)) - return; - - if (!dev_priv->render_reclock_avail) { - DRM_DEBUG_DRIVER("not reclocking render clock\n"); - return; - } - - if (IS_G4X(dev)) { - u16 gcfgc; - - /* Adjust render clock... */ - pci_read_config_word(dev->pdev, GCFGC, &gcfgc); - - /* Down to minimum... */ - gcfgc &= ~GM45_GC_RENDER_CLOCK_MASK; - gcfgc |= GM45_GC_RENDER_CLOCK_266_MHZ; - - pci_write_config_word(dev->pdev, GCFGC, gcfgc); - } else if (IS_I965G(dev)) { - u16 gcfgc; - - /* Adjust render clock... */ - pci_read_config_word(dev->pdev, GCFGC, &gcfgc); - - /* Down to minimum... */ - gcfgc &= ~I965_GC_RENDER_CLOCK_MASK; - gcfgc |= I965_GC_RENDER_CLOCK_267_MHZ; - - pci_write_config_word(dev->pdev, GCFGC, gcfgc); - } else if (IS_I945G(dev) || IS_I945GM(dev)) { - u16 gcfgc; - - /* Adjust render clock... */ - pci_read_config_word(dev->pdev, GCFGC, &gcfgc); - - /* Down to minimum... */ - gcfgc &= ~I945_GC_RENDER_CLOCK_MASK; - gcfgc |= I945_GC_RENDER_CLOCK_166_MHZ; - - pci_write_config_word(dev->pdev, GCFGC, gcfgc); - } else if (IS_I915G(dev)) { - u16 gcfgc; - - /* Adjust render clock... */ - pci_read_config_word(dev->pdev, GCFGC, &gcfgc); - - /* Down to minimum... */ - gcfgc &= ~I915_GC_RENDER_CLOCK_MASK; - gcfgc |= I915_GC_RENDER_CLOCK_166_MHZ; - - pci_write_config_word(dev->pdev, GCFGC, gcfgc); - } else if (IS_I85X(dev)) { - u16 hpllcc; - - /* Adjust render clock... */ - pci_read_config_word(dev->pdev, HPLLCC, &hpllcc); - - /* Up to maximum... */ - hpllcc &= ~GC_CLOCK_CONTROL_MASK; - hpllcc |= GC_CLOCK_133_200; - - pci_write_config_word(dev->pdev, HPLLCC, hpllcc); - } - DRM_DEBUG_DRIVER("decreasing render clock frequency\n"); -} - -/* Note that no increase function is needed for this - increase_renderclock() - * will also rewrite these bits - */ -void intel_decrease_displayclock(struct drm_device *dev) -{ - if (IS_IRONLAKE(dev)) - return; - - if (IS_I945G(dev) || IS_I945GM(dev) || IS_I915G(dev) || - IS_I915GM(dev)) { - u16 gcfgc; - - /* Adjust render clock... */ - pci_read_config_word(dev->pdev, GCFGC, &gcfgc); - - /* Down to minimum... */ - gcfgc &= ~0xf0; - gcfgc |= 0x80; - - pci_write_config_word(dev->pdev, GCFGC, gcfgc); - } -} - #define CRTC_IDLE_TIMEOUT 1000 /* ms */ static void intel_crtc_idle_timer(unsigned long arg) @@ -4011,12 +3892,6 @@ static void intel_idle_update(struct work_struct *work) mutex_lock(&dev->struct_mutex); - /* GPU isn't processing, downclock it. */ - if (!dev_priv->busy) { - intel_decrease_renderclock(dev); - intel_decrease_displayclock(dev); - } - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { /* Skip inactive CRTCs */ if (!crtc->fb) @@ -4050,13 +3925,11 @@ void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj) if (!drm_core_check_feature(dev, DRIVER_MODESET)) return; - if (!dev_priv->busy) { + if (!dev_priv->busy) dev_priv->busy = true; - intel_increase_renderclock(dev, true); - } else { + else mod_timer(&dev_priv->idle_timer, jiffies + msecs_to_jiffies(GPU_IDLE_TIMEOUT)); - } list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { if (!crtc->fb) @@ -4784,7 +4657,6 @@ void intel_modeset_cleanup(struct drm_device *dev) del_timer_sync(&intel_crtc->idle_timer); } - intel_increase_renderclock(dev, false); del_timer_sync(&dev_priv->idle_timer); if (dev_priv->display.disable_fbc) From 69e302a998ddfc3bd99033052f6d6152a46e7d6e Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 23 Dec 2009 14:14:34 +0100 Subject: [PATCH 0420/1626] drm/i915: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 9187a1736b01..af61dd915f2b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2448,7 +2448,7 @@ static void pineview_enable_cxsr(struct drm_device *dev, unsigned long clock, * A value of 5us seems to be a good balance; safe for very low end * platforms but not overly aggressive on lower latency configs. */ -const static int latency_ns = 5000; +static const int latency_ns = 5000; static int i9xx_get_fifo_size(struct drm_device *dev, int plane) { @@ -2559,7 +2559,7 @@ static void g4x_update_wm(struct drm_device *dev, int planea_clock, /* Calc sr entries for one plane configs */ if (sr_hdisplay && (!planea_clock || !planeb_clock)) { /* self-refresh has much higher latency */ - const static int sr_latency_ns = 12000; + static const int sr_latency_ns = 12000; sr_clock = planea_clock ? planea_clock : planeb_clock; line_time_us = ((sr_hdisplay * 1000) / sr_clock); @@ -2598,7 +2598,7 @@ static void i965_update_wm(struct drm_device *dev, int planea_clock, /* Calc sr entries for one plane configs */ if (sr_hdisplay && (!planea_clock || !planeb_clock)) { /* self-refresh has much higher latency */ - const static int sr_latency_ns = 12000; + static const int sr_latency_ns = 12000; sr_clock = planea_clock ? planea_clock : planeb_clock; line_time_us = ((sr_hdisplay * 1000) / sr_clock); @@ -2667,7 +2667,7 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock, if (HAS_FW_BLC(dev) && sr_hdisplay && (!planea_clock || !planeb_clock)) { /* self-refresh has much higher latency */ - const static int sr_latency_ns = 6000; + static const int sr_latency_ns = 6000; sr_clock = planea_clock ? planea_clock : planeb_clock; line_time_us = ((sr_hdisplay * 1000) / sr_clock); From 29bd0ae25f8cb96b63560c2cbccec77b425e1603 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 17 Nov 2009 14:08:52 -0800 Subject: [PATCH 0421/1626] drm/i915: fix unused var drivers/gpu/drm/i915/i915_dma.c: In function 'i915_driver_load': drivers/gpu/drm/i915/i915_dma.c:1114: warning: 'll_base' may be used uninitialized in this function Partly this is because gcc isn't smart enough. But `ll_base' does get used uninitialised in the DRM_DEBUG() call. Cc: Jesse Barnes Cc: Eric Anholt Cc: Dave Airlie Signed-off-by: Andrew Morton Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index d67be655c532..c2b11088a6ea 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1121,7 +1121,8 @@ static void i915_setup_compression(struct drm_device *dev, int size) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_mm_node *compressed_fb, *compressed_llb; - unsigned long cfb_base, ll_base; + unsigned long cfb_base; + unsigned long ll_base = 0; /* Leave 1M for line length buffer & misc. */ compressed_fb = drm_mm_search_free(&dev_priv->vram, size, 4096, 0); From 9ea8d05932c082a7ccbd9dc2e10687c88a70bd13 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 4 Jan 2010 18:57:56 +0000 Subject: [PATCH 0422/1626] drm/i915: Hold struct mutex whilst pinning power context bo. Hugh found an error path where we were attempting to unref a bo without holding the struct mutex: [drm:intel_init_clock_gating] *ERROR* failed to pin power context: -16 ------------[ cut here ]------------ WARNING: at drivers/gpu/drm/drm_gem.c:438 drm_gem_object_free+0x20/0x5e() Hardware name: ESPRIMO Mobile V5505 Modules linked in: snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device Pid: 3793, comm: s2ram Not tainted 2.6.33-rc2 #4 Call Trace: [<7815298e>] warn_slowpath_common+0x59/0x6b [<781529b3>] warn_slowpath_null+0x13/0x18 [<78317c1a>] ? drm_gem_object_free+0x20/0x5e [<78317c1a>] drm_gem_object_free+0x20/0x5e [<78317bfa>] ? drm_gem_object_free+0x0/0x5e [<7829df11>] kref_put+0x38/0x45 [<7833a5f0>] intel_init_clock_gating+0x232/0x271 [<78317bfa>] ? drm_gem_object_free+0x0/0x5e [<7832c307>] i915_restore_state+0x21a/0x2b3 [<7832379d>] i915_resume+0x3c/0xbb [<78174fe5>] ? trace_hardirqs_on_caller+0xfc/0x123 [<7831c756>] ? drm_class_resume+0x0/0x3e [<7831c78d>] drm_class_resume+0x37/0x3e [<78351e0a>] legacy_resume+0x1e/0x51 [<78351ece>] device_resume+0x91/0xab [<7831c756>] ? drm_class_resume+0x0/0x3e [<78352226>] dpm_resume+0x58/0x10f [<783522fb>] dpm_resume_end+0x1e/0x2c [<78180f80>] suspend_devices_and_enter+0x61/0x84 [<78180ff8>] enter_state+0x55/0x83 [<7818091c>] state_store+0x94/0xaa [<7829d09e>] kobj_attr_store+0x1e/0x23 [<782098e0>] sysfs_write_file+0x66/0x99 [<781cd2f0>] vfs_write+0x8a/0x108 [<781cd408>] sys_write+0x3c/0x63 [<78125c10>] sysenter_do_call+0x12/0x36 ---[ end trace a343537f29950fda ]--- It is in fact slightly more insiduous that first appears since we are attempting to not just free the object without the lock, but are trying to do the whole bo manipulation without holding the lock. Reported-by: Hugh Dickins Signed-off-by: Chris Wilson Cc: stable@kernel.org Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 75 ++++++++++++++++++---------- 1 file changed, 48 insertions(+), 27 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index af61dd915f2b..84705b7e01ec 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4414,6 +4414,42 @@ static const struct drm_mode_config_funcs intel_mode_funcs = { .fb_changed = intelfb_probe, }; +static struct drm_gem_object * +intel_alloc_power_context(struct drm_device *dev) +{ + struct drm_gem_object *pwrctx; + int ret; + + pwrctx = drm_gem_object_alloc(dev, 4096); + if (!pwrctx) { + DRM_DEBUG("failed to alloc power context, RC6 disabled\n"); + return NULL; + } + + mutex_lock(&dev->struct_mutex); + ret = i915_gem_object_pin(pwrctx, 4096); + if (ret) { + DRM_ERROR("failed to pin power context: %d\n", ret); + goto err_unref; + } + + ret = i915_gem_object_set_to_gtt_domain(pwrctx, 1); + if (ret) { + DRM_ERROR("failed to set-domain on power context: %d\n", ret); + goto err_unpin; + } + mutex_unlock(&dev->struct_mutex); + + return pwrctx; + +err_unpin: + i915_gem_object_unpin(pwrctx); +err_unref: + drm_gem_object_unreference(pwrctx); + mutex_unlock(&dev->struct_mutex); + return NULL; +} + void intel_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -4467,41 +4503,26 @@ void intel_init_clock_gating(struct drm_device *dev) * to save state. */ if (I915_HAS_RC6(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) { - struct drm_gem_object *pwrctx; - struct drm_i915_gem_object *obj_priv; - int ret; + struct drm_i915_gem_object *obj_priv = NULL; if (dev_priv->pwrctx) { obj_priv = dev_priv->pwrctx->driver_private; } else { - pwrctx = drm_gem_object_alloc(dev, 4096); - if (!pwrctx) { - DRM_DEBUG("failed to alloc power context, " - "RC6 disabled\n"); - goto out; + struct drm_gem_object *pwrctx; + + pwrctx = intel_alloc_power_context(dev); + if (pwrctx) { + dev_priv->pwrctx = pwrctx; + obj_priv = pwrctx->driver_private; } - - ret = i915_gem_object_pin(pwrctx, 4096); - if (ret) { - DRM_ERROR("failed to pin power context: %d\n", - ret); - drm_gem_object_unreference(pwrctx); - goto out; - } - - i915_gem_object_set_to_gtt_domain(pwrctx, 1); - - dev_priv->pwrctx = pwrctx; - obj_priv = pwrctx->driver_private; } - I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN); - I915_WRITE(MCHBAR_RENDER_STANDBY, - I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT); + if (obj_priv) { + I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN); + I915_WRITE(MCHBAR_RENDER_STANDBY, + I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT); + } } - -out: - return; } /* Set up chip specific display functions */ From e3d8affb0d2d95f2da61e30ce86b33177feb91e8 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 4 Jan 2010 18:57:57 +0000 Subject: [PATCH 0423/1626] drm/i915: Permit pinning whilst the device is 'suspended' As pinning (allocating and binding GTT memory) does not actually invoke GPU commands, it is safe, and indeed is attempted, during resumption from suspension: [drm:intel_init_clock_gating] *ERROR* failed to pin power context: -16 Signed-off-by: Chris Wilson Reported-by: Hugh Dickins Cc: stable@kernel.org Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 0330c3aa8032..21950ef987c7 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2582,9 +2582,6 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) bool retry_alloc = false; int ret; - if (dev_priv->mm.suspended) - return -EBUSY; - if (obj_priv->madv != I915_MADV_WILLNEED) { DRM_ERROR("Attempting to bind a purgeable object\n"); return -EINVAL; From 898822ce9561ab9b58a7eb60580a162a83dadecd Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 4 Jan 2010 16:29:30 +0800 Subject: [PATCH 0424/1626] drm/i915: Enable/disable the dithering for LVDS based on VBT setting Enable/disable the dithering for LVDS based on VBT setting. On the 965/g4x platform the dithering flag is defined in LVDS register. And on the ironlake the dithering flag is defined in pipeconf register. Signed-off-by: Zhao Yakui Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 4 ++++ drivers/gpu/drm/i915/intel_display.c | 15 ++++++++++++++- 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index f79b13324faf..149d360d64a3 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -975,6 +975,8 @@ #define LVDS_PORT_EN (1 << 31) /* Selects pipe B for LVDS data. Must be set on pre-965. */ #define LVDS_PIPEB_SELECT (1 << 30) +/* LVDS dithering flag on 965/g4x platform */ +#define LVDS_ENABLE_DITHER (1 << 25) /* Enable border for unscaled (or aspect-scaled) display */ #define LVDS_BORDER_ENABLE (1 << 15) /* @@ -1744,6 +1746,8 @@ /* Display & cursor control */ +/* dithering flag on Ironlake */ +#define PIPE_ENABLE_DITHER (1 << 4) /* Pipe A */ #define PIPEADSL 0x70000 #define PIPEACONF 0x70008 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 84705b7e01ec..0c9b79f2ab31 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3195,7 +3195,20 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, * appropriately here, but we need to look more thoroughly into how * panels behave in the two modes. */ - + /* set the dithering flag */ + if (IS_I965G(dev)) { + if (dev_priv->lvds_dither) { + if (IS_IRONLAKE(dev)) + pipeconf |= PIPE_ENABLE_DITHER; + else + lvds |= LVDS_ENABLE_DITHER; + } else { + if (IS_IRONLAKE(dev)) + pipeconf &= ~PIPE_ENABLE_DITHER; + else + lvds &= ~LVDS_ENABLE_DITHER; + } + } I915_WRITE(lvds_reg, lvds); I915_READ(lvds_reg); } From 8faf3b317471179c02db339aa80955a2e88c036d Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 4 Jan 2010 16:29:31 +0800 Subject: [PATCH 0425/1626] drm/i915: Make the BPC in FDI rx/transcoder be consistent with that in pipeconf on Ironlake Make the BPC in FDI rx/transcoder be consistent with that in pipeconf on Ironlake. Signed-off-by: Zhao Yakui Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 0c9b79f2ab31..63e8e9fd6793 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1493,6 +1493,10 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B; u32 temp; int tries = 5, j, n; + u32 pipe_bpc; + + temp = I915_READ(pipeconf_reg); + pipe_bpc = temp & PIPE_BPC_MASK; /* XXX: When our outputs are all unaware of DPMS modes other than off * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. @@ -1524,6 +1528,12 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) /* enable PCH FDI RX PLL, wait warmup plus DMI latency */ temp = I915_READ(fdi_rx_reg); + /* + * make the BPC in FDI Rx be consistent with that in + * pipeconf reg. + */ + temp &= ~(0x7 << 16); + temp |= (pipe_bpc << 11); I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE | FDI_SEL_PCDCLK | FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */ @@ -1666,6 +1676,12 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) /* enable PCH transcoder */ temp = I915_READ(transconf_reg); + /* + * make the BPC in transcoder be consistent with + * that in pipeconf reg. + */ + temp &= ~PIPE_BPC_MASK; + temp |= pipe_bpc; I915_WRITE(transconf_reg, temp | TRANS_ENABLE); I915_READ(transconf_reg); @@ -1745,6 +1761,9 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) I915_READ(fdi_tx_reg); temp = I915_READ(fdi_rx_reg); + /* BPC in FDI rx is consistent with that in pipeconf */ + temp &= ~(0x07 << 16); + temp |= (pipe_bpc << 11); I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE); I915_READ(fdi_rx_reg); @@ -1789,7 +1808,12 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) } } } - + temp = I915_READ(transconf_reg); + /* BPC in transcoder is consistent with that in pipeconf */ + temp &= ~PIPE_BPC_MASK; + temp |= pipe_bpc; + I915_WRITE(transconf_reg, temp); + I915_READ(transconf_reg); udelay(100); /* disable PCH DPLL */ From e5a95eb778690bc864eb330202d2c1b974caaeb4 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 4 Jan 2010 16:29:32 +0800 Subject: [PATCH 0426/1626] drm/i915: Select the correct BPC for LVDS on Ironlake Select the correct BPC for LVDS on Ironlake. If it is 18-bit LVDS panel, the BPC will be 6. When it is 24-bit LVDS panel, the BPC will 8. At the same time the BPC will be 8 when the output device is CRT/HDMI/DP. Signed-off-by: Zhao Yakui Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 63e8e9fd6793..5e2159b59920 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2993,6 +2993,18 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* determine panel color depth */ temp = I915_READ(pipeconf_reg); + temp &= ~PIPE_BPC_MASK; + if (is_lvds) { + int lvds_reg = I915_READ(PCH_LVDS); + /* the BPC will be 6 if it is 18-bit LVDS panel */ + if ((lvds_reg & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) + temp |= PIPE_8BPC; + else + temp |= PIPE_6BPC; + } else + temp |= PIPE_8BPC; + I915_WRITE(pipeconf_reg, temp); + I915_READ(pipeconf_reg); switch (temp & PIPE_BPC_MASK) { case PIPE_8BPC: From 4547668a050e7de3cd73a4c6736dfc2adebff67d Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Thu, 31 Dec 2009 16:06:04 +0800 Subject: [PATCH 0427/1626] drm/i915: Add DP dpll limit on ironlake and use existing DPLL search function For some clocks, the old Ironlake DPLL calculator wold give m/n/p combinations that didn't match the spreadsheet of what HW validation tests. Instead, use the G4X DPLL calculator, which does a better job at it. So we use the intel_g4x_find_best_pll to calculate the DPLL for CRT/HDMI/LVDS on ironlake. At the same time to consider the dpll setting for display port, we add the display port DPLL limit on ironlake, which will directly use the function of intel_find_pll_ironlake_dp to get the corresponding dpll setting. Signed-off-by: Zhao Yakui Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 116 +++++++++++---------------- 1 file changed, 48 insertions(+), 68 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 5e2159b59920..002612fae717 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -262,6 +262,14 @@ struct intel_limit { #define IRONLAKE_P2_LVDS_FAST 7 /* double channel */ #define IRONLAKE_P2_DOT_LIMIT 225000 /* 225Mhz */ +#define IRONLAKE_P_DISPLAY_PORT_MIN 10 +#define IRONLAKE_P_DISPLAY_PORT_MAX 20 +#define IRONLAKE_P2_DISPLAY_PORT_FAST 10 +#define IRONLAKE_P2_DISPLAY_PORT_SLOW 10 +#define IRONLAKE_P2_DISPLAY_PORT_LIMIT 0 +#define IRONLAKE_P1_DISPLAY_PORT_MIN 1 +#define IRONLAKE_P1_DISPLAY_PORT_MAX 2 + static bool intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); @@ -271,9 +279,6 @@ intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, static bool intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); -static bool -intel_ironlake_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *best_clock); static bool intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc, @@ -496,7 +501,7 @@ static const intel_limit_t intel_limits_ironlake_sdvo = { .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, .p2_slow = IRONLAKE_P2_SDVO_DAC_SLOW, .p2_fast = IRONLAKE_P2_SDVO_DAC_FAST }, - .find_pll = intel_ironlake_find_best_PLL, + .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_lvds = { @@ -511,7 +516,30 @@ static const intel_limit_t intel_limits_ironlake_lvds = { .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, .p2_slow = IRONLAKE_P2_LVDS_SLOW, .p2_fast = IRONLAKE_P2_LVDS_FAST }, - .find_pll = intel_ironlake_find_best_PLL, + .find_pll = intel_g4x_find_best_PLL, +}; + +static const intel_limit_t intel_limits_ironlake_display_port = { + .dot = { .min = IRONLAKE_DOT_MIN, + .max = IRONLAKE_DOT_MAX }, + .vco = { .min = IRONLAKE_VCO_MIN, + .max = IRONLAKE_VCO_MAX}, + .n = { .min = IRONLAKE_N_MIN, + .max = IRONLAKE_N_MAX }, + .m = { .min = IRONLAKE_M_MIN, + .max = IRONLAKE_M_MAX }, + .m1 = { .min = IRONLAKE_M1_MIN, + .max = IRONLAKE_M1_MAX }, + .m2 = { .min = IRONLAKE_M2_MIN, + .max = IRONLAKE_M2_MAX }, + .p = { .min = IRONLAKE_P_DISPLAY_PORT_MIN, + .max = IRONLAKE_P_DISPLAY_PORT_MAX }, + .p1 = { .min = IRONLAKE_P1_DISPLAY_PORT_MIN, + .max = IRONLAKE_P1_DISPLAY_PORT_MAX}, + .p2 = { .dot_limit = IRONLAKE_P2_DISPLAY_PORT_LIMIT, + .p2_slow = IRONLAKE_P2_DISPLAY_PORT_SLOW, + .p2_fast = IRONLAKE_P2_DISPLAY_PORT_FAST }, + .find_pll = intel_find_pll_ironlake_dp, }; static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc) @@ -519,6 +547,9 @@ static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc) const intel_limit_t *limit; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) limit = &intel_limits_ironlake_lvds; + else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || + HAS_eDP) + limit = &intel_limits_ironlake_display_port; else limit = &intel_limits_ironlake_sdvo; @@ -791,7 +822,13 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, found = false; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { - if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == + int lvds_reg; + + if (IS_IRONLAKE(dev)) + lvds_reg = PCH_LVDS; + else + lvds_reg = LVDS; + if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) clock.p2 = limit->p2.p2_fast; else @@ -839,6 +876,11 @@ intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc, { struct drm_device *dev = crtc->dev; intel_clock_t clock; + + /* return directly when it is eDP */ + if (HAS_eDP) + return true; + if (target < 200000) { clock.n = 1; clock.p1 = 2; @@ -857,68 +899,6 @@ intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc, return true; } -static bool -intel_ironlake_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *best_clock) -{ - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - intel_clock_t clock; - int err_most = 47; - int err_min = 10000; - - /* eDP has only 2 clock choice, no n/m/p setting */ - if (HAS_eDP) - return true; - - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) - return intel_find_pll_ironlake_dp(limit, crtc, target, - refclk, best_clock); - - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { - if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == - LVDS_CLKB_POWER_UP) - clock.p2 = limit->p2.p2_fast; - else - clock.p2 = limit->p2.p2_slow; - } else { - if (target < limit->p2.dot_limit) - clock.p2 = limit->p2.p2_slow; - else - clock.p2 = limit->p2.p2_fast; - } - - memset(best_clock, 0, sizeof(*best_clock)); - for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) { - /* based on hardware requriment prefer smaller n to precision */ - for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { - /* based on hardware requirment prefere larger m1,m2 */ - for (clock.m1 = limit->m1.max; - clock.m1 >= limit->m1.min; clock.m1--) { - for (clock.m2 = limit->m2.max; - clock.m2 >= limit->m2.min; clock.m2--) { - int this_err; - - intel_clock(dev, refclk, &clock); - if (!intel_PLL_is_valid(crtc, &clock)) - continue; - this_err = abs((10000 - (target*10000/clock.dot))); - if (this_err < err_most) { - *best_clock = clock; - /* found on first matching */ - goto out; - } else if (this_err < err_min) { - *best_clock = clock; - err_min = this_err; - } - } - } - } - } -out: - return true; -} - /* DisplayPort has only two frequencies, 162MHz and 270MHz */ static bool intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, From 823f68fd646da6a39a9c0d3eb4c60d69dab5aa13 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 28 Dec 2009 13:23:36 +0800 Subject: [PATCH 0428/1626] drm/i915: remove full registers dump debug This one reverts 9e3a6d155ed0a7636b926a798dd7221ea107b274. As reported by http://bugzilla.kernel.org/show_bug.cgi?id=14485, this dump will cause hang problem on some machine. If something really needs this kind of full registers dump, that could be done within intel-gpu-tools. Cc: Ben Gamari Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_debugfs.c | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 463e8d0155c2..9c9998c4dceb 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -386,34 +386,6 @@ out: return 0; } -static int i915_registers_info(struct seq_file *m, void *data) { - struct drm_info_node *node = (struct drm_info_node *) m->private; - struct drm_device *dev = node->minor->dev; - drm_i915_private_t *dev_priv = dev->dev_private; - uint32_t reg; - -#define DUMP_RANGE(start, end) \ - for (reg=start; reg < end; reg += 4) \ - seq_printf(m, "%08x\t%08x\n", reg, I915_READ(reg)); - - DUMP_RANGE(0x00000, 0x00fff); /* VGA registers */ - DUMP_RANGE(0x02000, 0x02fff); /* instruction, memory, interrupt control registers */ - DUMP_RANGE(0x03000, 0x031ff); /* FENCE and PPGTT control registers */ - DUMP_RANGE(0x03200, 0x03fff); /* frame buffer compression registers */ - DUMP_RANGE(0x05000, 0x05fff); /* I/O control registers */ - DUMP_RANGE(0x06000, 0x06fff); /* clock control registers */ - DUMP_RANGE(0x07000, 0x07fff); /* 3D internal debug registers */ - DUMP_RANGE(0x07400, 0x088ff); /* GPE debug registers */ - DUMP_RANGE(0x0a000, 0x0afff); /* display palette registers */ - DUMP_RANGE(0x10000, 0x13fff); /* MMIO MCHBAR */ - DUMP_RANGE(0x30000, 0x3ffff); /* overlay registers */ - DUMP_RANGE(0x60000, 0x6ffff); /* display engine pipeline registers */ - DUMP_RANGE(0x70000, 0x72fff); /* display and cursor registers */ - DUMP_RANGE(0x73000, 0x73fff); /* performance counters */ - - return 0; -} - static int i915_wedged_open(struct inode *inode, struct file *filp) @@ -519,7 +491,6 @@ static int i915_wedged_create(struct dentry *root, struct drm_minor *minor) } static struct drm_info_list i915_debugfs_list[] = { - {"i915_regs", i915_registers_info, 0}, {"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST}, {"i915_gem_flushing", i915_gem_object_list_info, 0, (void *) FLUSHING_LIST}, {"i915_gem_inactive", i915_gem_object_list_info, 0, (void *) INACTIVE_LIST}, From 7f41c2e1523f628cc248e34192162aec5728bed7 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Wed, 6 Jan 2010 10:56:31 -0800 Subject: [PATCH 0429/1626] x86, irq: Check move_in_progress before freeing the vector mapping With the recent irq migration fixes (post 2.6.32), Gary Hade has noticed "No IRQ handler for vector" messages during the 2.6.33-rc1 kernel boot on IBM AMD platforms and root caused the issue to this commit: > commit 23359a88e7eca3c4f402562b102f23014db3c2aa > Author: Suresh Siddha > Date: Mon Oct 26 14:24:33 2009 -0800 > > x86: Remove move_cleanup_count from irq_cfg As part of this patch, we have removed the move_cleanup_count check in smp_irq_move_cleanup_interrupt(). With this change, we can run into a situation where an irq cleanup interrupt on a cpu can cleanup the vector mappings associated with multiple irqs, of which one of the irq's migration might be still in progress. As such when that irq hits the old cpu, we get the "No IRQ handler" messages. Fix this by checking for the irq_cfg's move_in_progress and if the move is still in progress delay the vector cleanup to another irq cleanup interrupt request (which will happen when the irq starts arriving at the new cpu destination). Reported-and-tested-by: Gary Hade Signed-off-by: Suresh Siddha LKML-Reference: <1262804191.2732.7.camel@sbs-t61.sc.intel.com> Cc: Eric W. Biederman Signed-off-by: H. Peter Anvin --- arch/x86/kernel/apic/io_apic.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index de00c4619a55..53243ca7816d 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2434,6 +2434,13 @@ asmlinkage void smp_irq_move_cleanup_interrupt(void) cfg = irq_cfg(irq); raw_spin_lock(&desc->lock); + /* + * Check if the irq migration is in progress. If so, we + * haven't received the cleanup request yet for this irq. + */ + if (cfg->move_in_progress) + goto unlock; + if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) goto unlock; From debde9ea24d5512400456b1b64df361e422f078d Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 6 Jan 2010 15:35:49 -0500 Subject: [PATCH 0430/1626] mac80211: fix-up build breakage in 2.6.33 "mac80211: fix skb buffering issue" is based on what will become 2.6.34, so it includes an incompatible usage of sta_info_get. This patch will need to be effectively reverted when merging for 2.6.34. Signed-off-by: John W. Linville --- net/mac80211/wme.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index 34e6d02da779..79d887dae738 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -96,7 +96,7 @@ u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata, } if (!sta && ra && !is_multicast_ether_addr(ra)) { - sta = sta_info_get(sdata, ra); + sta = sta_info_get(local, ra); if (sta) sta_flags = get_sta_flags(sta); } From 4c425588e0d72c9c55024752b0f6e709c96787ff Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Wed, 6 Jan 2010 12:48:55 -0800 Subject: [PATCH 0431/1626] IB/mlx4: Initialize SRQ scatter entries when creating an SRQ As for memfree mthca hardware, ConnectX also requires SRQ WQE scatter entries to be initialized with the invalid L_Key at SRQ creation time. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/srq.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/infiniband/hw/mlx4/srq.c b/drivers/infiniband/hw/mlx4/srq.c index d42565258fb7..cf8085bcbd6d 100644 --- a/drivers/infiniband/hw/mlx4/srq.c +++ b/drivers/infiniband/hw/mlx4/srq.c @@ -74,6 +74,7 @@ struct ib_srq *mlx4_ib_create_srq(struct ib_pd *pd, struct mlx4_ib_dev *dev = to_mdev(pd->device); struct mlx4_ib_srq *srq; struct mlx4_wqe_srq_next_seg *next; + struct mlx4_wqe_data_seg *scatter; int desc_size; int buf_size; int err; @@ -149,6 +150,11 @@ struct ib_srq *mlx4_ib_create_srq(struct ib_pd *pd, next = get_wqe(srq, i); next->next_wqe_index = cpu_to_be16((i + 1) & (srq->msrq.max - 1)); + + for (scatter = (void *) (next + 1); + (void *) scatter < (void *) next + desc_size; + ++scatter) + scatter->lkey = cpu_to_be32(MLX4_INVALID_LKEY); } err = mlx4_mtt_init(dev->dev, srq->buf.npages, srq->buf.page_shift, From 2b946077423270f065013c45d78522a5fb9542ca Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Wed, 6 Jan 2010 12:51:30 -0800 Subject: [PATCH 0432/1626] IB/mlx4: Fix queue overflow check in post_recv In mlx4_ib_post_recv(), we should check the queue for overflow using recv_cq instead of send_cq (current code looks like a copy-and-paste mistake). Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 989555cee883..2a97c964b9ef 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1752,7 +1752,7 @@ int mlx4_ib_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *wr, ind = qp->rq.head & (qp->rq.wqe_cnt - 1); for (nreq = 0; wr; ++nreq, wr = wr->next) { - if (mlx4_wq_overflow(&qp->rq, nreq, qp->ibqp.send_cq)) { + if (mlx4_wq_overflow(&qp->rq, nreq, qp->ibqp.recv_cq)) { err = -ENOMEM; *bad_wr = wr; goto out; From b4f77264cd1a858ee09da8dba5a2711a649adbf3 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 6 Jan 2010 12:54:39 -0800 Subject: [PATCH 0433/1626] mlx4_core: Fix cleanup in __mlx4_init_one() error path If mlx4_init_port_info() fails, cleanup the initialized ports only. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/net/mlx4/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 291a505fd4fc..3cf56d90d859 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -1174,7 +1174,7 @@ static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) return 0; err_port: - for (port = 1; port <= dev->caps.num_ports; port++) + for (--port; port >= 1; --port) mlx4_cleanup_port_info(&priv->port[port]); mlx4_cleanup_mcg_table(dev); From fd4582a3999e03fa9eae315bf14c88fd32d44035 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Wed, 6 Jan 2010 13:16:30 -0800 Subject: [PATCH 0434/1626] IB/addr: Correct CONFIG_IPv6 to CONFIG_IPV6 Correct misspelled "CONFIG_IPv6" that was introduced in commit d14714df ("IB/addr: Fix IPv6 routing lookup"). The config variable should be all uppercase. Signed-off-by: Robert P. J. Day [ This was my fault when I munged the original patch. - Roland ] Signed-off-by: Roland Dreier --- drivers/infiniband/core/cma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index fbdd73106000..cc9b5940fa97 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -2083,7 +2083,7 @@ static int cma_get_port(struct rdma_id_private *id_priv) static int cma_check_linklocal(struct rdma_dev_addr *dev_addr, struct sockaddr *addr) { -#if defined(CONFIG_IPv6) || defined(CONFIG_IPV6_MODULE) +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) struct sockaddr_in6 *sin6; if (addr->sa_family != AF_INET6) From 8a5b33f55452c226aa0e47d737e541985ff10e16 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 6 Jan 2010 15:39:39 -0500 Subject: [PATCH 0435/1626] Revert "mac80211: replace netif_tx_{start,stop,wake}_all_queues" This reverts commit 53623f1a09c7a7d23b74f0f7d93dba0ebde1006b. This was inadvertantly missed in "mac80211: fix skb buffering issue", and is required with that patch to restore proper queue operation. Signed-off-by: John W. Linville --- net/mac80211/iface.c | 4 ++-- net/mac80211/mlme.c | 4 ++-- net/mac80211/scan.c | 10 +++++----- 3 files changed, 9 insertions(+), 9 deletions(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index c261cdb359eb..ff762ed34f1e 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -316,7 +316,7 @@ static int ieee80211_open(struct net_device *dev) if (sdata->vif.type == NL80211_IFTYPE_STATION) ieee80211_queue_work(&local->hw, &sdata->u.mgd.work); - netif_start_queue(dev); + netif_tx_start_all_queues(dev); return 0; err_del_interface: @@ -345,7 +345,7 @@ static int ieee80211_stop(struct net_device *dev) /* * Stop TX on this interface first. */ - netif_stop_queue(dev); + netif_tx_stop_all_queues(dev); /* * Now delete all active aggregation sessions. diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index c79e59f82fd9..3e1eab963b8e 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -942,7 +942,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, ieee80211_recalc_ps(local, -1); mutex_unlock(&local->iflist_mtx); - netif_start_queue(sdata->dev); + netif_tx_start_all_queues(sdata->dev); netif_carrier_on(sdata->dev); } @@ -1074,7 +1074,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, * time -- we don't want the scan code to enable queues. */ - netif_stop_queue(sdata->dev); + netif_tx_stop_all_queues(sdata->dev); netif_carrier_off(sdata->dev); rcu_read_lock(); diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index f1a4c7160300..f934c9620b73 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -353,10 +353,10 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) if (sdata->vif.type == NL80211_IFTYPE_STATION) { if (sdata->u.mgd.associated) { ieee80211_scan_ps_disable(sdata); - netif_wake_queue(sdata->dev); + netif_tx_wake_all_queues(sdata->dev); } } else - netif_wake_queue(sdata->dev); + netif_tx_wake_all_queues(sdata->dev); /* re-enable beaconing */ if (sdata->vif.type == NL80211_IFTYPE_AP || @@ -411,7 +411,7 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) * are handled in the scan state machine */ if (sdata->vif.type != NL80211_IFTYPE_STATION) - netif_stop_queue(sdata->dev); + netif_tx_stop_all_queues(sdata->dev); } mutex_unlock(&local->iflist_mtx); @@ -575,7 +575,7 @@ static void ieee80211_scan_state_leave_oper_channel(struct ieee80211_local *loca continue; if (sdata->vif.type == NL80211_IFTYPE_STATION) { - netif_stop_queue(sdata->dev); + netif_tx_stop_all_queues(sdata->dev); if (sdata->u.mgd.associated) ieee80211_scan_ps_enable(sdata); } @@ -610,7 +610,7 @@ static void ieee80211_scan_state_enter_oper_channel(struct ieee80211_local *loca if (sdata->vif.type == NL80211_IFTYPE_STATION) { if (sdata->u.mgd.associated) ieee80211_scan_ps_disable(sdata); - netif_wake_queue(sdata->dev); + netif_tx_wake_all_queues(sdata->dev); } } mutex_unlock(&local->iflist_mtx); From 8558e3943df1c51c3377cb4e8a52ea484d6f357d Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 6 Jan 2010 16:11:06 -0500 Subject: [PATCH 0436/1626] x86, ACPI: delete acpi_boot_table_init() return value cleanup only. setup_arch(), doesn't care care if ACPI initialization succeeded or failed, so delete acpi_boot_table_init()'s return value. Signed-off-by: Len Brown --- arch/x86/kernel/acpi/boot.c | 22 ++++++---------------- include/linux/acpi.h | 6 +++--- 2 files changed, 9 insertions(+), 19 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index fb1035cd9a6a..036d28adf59d 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1529,16 +1529,10 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = { * if acpi_blacklisted() acpi_disabled = 1; * acpi_irq_model=... * ... - * - * return value: (currently ignored) - * 0: success - * !0: failure */ -int __init acpi_boot_table_init(void) +void __init acpi_boot_table_init(void) { - int error; - dmi_check_system(acpi_dmi_table); /* @@ -1546,15 +1540,14 @@ int __init acpi_boot_table_init(void) * One exception: acpi=ht continues far enough to enumerate LAPICs */ if (acpi_disabled && !acpi_ht) - return 1; + return; /* * Initialize the ACPI boot-time table parser. */ - error = acpi_table_init(); - if (error) { + if (acpi_table_init()) { disable_acpi(); - return error; + return; } acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf); @@ -1562,18 +1555,15 @@ int __init acpi_boot_table_init(void) /* * blacklist may disable ACPI entirely */ - error = acpi_blacklisted(); - if (error) { + if (acpi_blacklisted()) { if (acpi_force) { printk(KERN_WARNING PREFIX "acpi=force override\n"); } else { printk(KERN_WARNING PREFIX "Disabling ACPI support\n"); disable_acpi(); - return error; + return; } } - - return 0; } int __init early_acpi_boot_init(void) diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 36924255c0d5..b926afe8c03e 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -80,7 +80,7 @@ char * __acpi_map_table (unsigned long phys_addr, unsigned long size); void __acpi_unmap_table(char *map, unsigned long size); int early_acpi_boot_init(void); int acpi_boot_init (void); -int acpi_boot_table_init (void); +void acpi_boot_table_init (void); int acpi_mps_check (void); int acpi_numa_init (void); @@ -321,9 +321,9 @@ static inline int acpi_boot_init(void) return 0; } -static inline int acpi_boot_table_init(void) +static inline void acpi_boot_table_init(void) { - return 0; + return; } static inline int acpi_mps_check(void) From 6c8530993e1fdf1d6af0403e796fe14d80b4b097 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 6 Jan 2010 17:26:27 -0500 Subject: [PATCH 0437/1626] sunrpc: fix build-time warning Fix auth_gss printk format warning: net/sunrpc/auth_gss/auth_gss.c:660: warning: format '%ld' expects type 'long int', but argument 3 has type 'ssize_t' Signed-off-by: Randy Dunlap Acked-by: Jeff Layton Signed-off-by: Trond Myklebust --- net/sunrpc/auth_gss/auth_gss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 66cb89c18347..f7a7f8380e38 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -657,7 +657,7 @@ gss_pipe_downcall(struct file *filp, const char __user *src, size_t mlen) break; default: printk(KERN_CRIT "%s: bad return from " - "gss_fill_context: %ld\n", __func__, err); + "gss_fill_context: %zd\n", __func__, err); BUG(); } goto err_release_msg; From 7211a4e859ad070b28545c06e0a6cb60b3b8aa31 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 25 Dec 2009 17:44:45 +0100 Subject: [PATCH 0438/1626] nfsd: make sure data is on disk before calling ->fsync nfsd is not using vfs_fsync, so I missed it when changing the calling convention during the 2.6.32 window. This patch fixes it to not only start the data writeout, but also wait for it to complete before calling into ->fsync. Signed-off-by: Christoph Hellwig Cc: stable@kernel.org Signed-off-by: J. Bruce Fields --- fs/nfsd/vfs.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index e3ef3ec0efd0..d5fe17cb07e3 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -782,12 +782,9 @@ static inline int nfsd_dosync(struct file *filp, struct dentry *dp, int (*fsync) (struct file *, struct dentry *, int); int err; - err = filemap_fdatawrite(inode->i_mapping); + err = filemap_write_and_wait(inode->i_mapping); if (err == 0 && fop && (fsync = fop->fsync)) err = fsync(filp, dp, 0); - if (err == 0) - err = filemap_fdatawait(inode->i_mapping); - return err; } From b292cf9ce70d221c3f04ff62db5ab13d9a249ca8 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Thu, 31 Dec 2009 10:52:36 +0800 Subject: [PATCH 0439/1626] sunrpc: fix peername failed on closed listener There're some warnings of "nfsd: peername failed (err 107)!" socket error -107 means Transport endpoint is not connected. This warning message was outputed by svc_tcp_accept() [net/sunrpc/svcsock.c], when kernel_getpeername returns -107. This means socket might be CLOSED. And svc_tcp_accept was called by svc_recv() [net/sunrpc/svc_xprt.c] if (test_bit(XPT_LISTENER, &xprt->xpt_flags)) { newxpt = xprt->xpt_ops->xpo_accept(xprt); So this might happen when xprt->xpt_flags has both XPT_LISTENER and XPT_CLOSE. Let's take a look at commit b0401d72, this commit has moved the close processing after do recvfrom method, but this commit also introduces this warnings, if the xpt_flags has both XPT_LISTENER and XPT_CLOSED, we should close it, not accpet then close. Signed-off-by: Xiaotian Feng Cc: J. Bruce Fields Cc: Neil Brown Cc: Trond Myklebust Cc: David S. Miller Cc: stable@kernel.org Signed-off-by: J. Bruce Fields --- net/sunrpc/svc_xprt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c index 2c58b75a236f..810ffe8a636b 100644 --- a/net/sunrpc/svc_xprt.c +++ b/net/sunrpc/svc_xprt.c @@ -699,7 +699,8 @@ int svc_recv(struct svc_rqst *rqstp, long timeout) spin_unlock_bh(&pool->sp_lock); len = 0; - if (test_bit(XPT_LISTENER, &xprt->xpt_flags)) { + if (test_bit(XPT_LISTENER, &xprt->xpt_flags) && + !test_bit(XPT_CLOSE, &xprt->xpt_flags)) { struct svc_xprt *newxpt; newxpt = xprt->xpt_ops->xpo_accept(xprt); if (newxpt) { From 1d1e9f04216b379000128392b11edd7f5d0ebed1 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 6 Jan 2010 15:55:12 +1100 Subject: [PATCH 0440/1626] [IA64] cpumask_of_node() should handle -1 as a node pcibus_to_node can return -1 if we cannot determine which node a pci bus is on. If passed -1, cpumask_of_node will negatively index the lookup array and pull in random data: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus 00000000,00000003,00000000,00000000 # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 64-65 Change cpumask_of_node to check for -1 and return cpu_all_mask in this case: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus ffffffff,ffffffff,ffffffff,ffffffff # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 0-127 Signed-off-by: Anton Blanchard Signed-off-by: Tony Luck --- arch/ia64/include/asm/topology.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h index 3ddb4e709dba..d323071d0f91 100644 --- a/arch/ia64/include/asm/topology.h +++ b/arch/ia64/include/asm/topology.h @@ -33,7 +33,9 @@ /* * Returns a bitmask of CPUs on Node 'node'. */ -#define cpumask_of_node(node) (&node_to_cpu_mask[node]) +#define cpumask_of_node(node) ((node) == -1 ? \ + cpu_all_mask : \ + &node_to_cpu_mask[node]) /* * Returns the number of the node containing Node 'nid'. From 56335936de1a41c8978fde62b2158af77ddc7258 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Wed, 6 Jan 2010 18:48:26 -0500 Subject: [PATCH 0441/1626] nfs: fix oops in nfs_rename() Recent change is missing to update "rehash". With that change, it will become the cause of adding dentry to hash twice. This explains the reason of Oops (dereference the freed dentry in __d_lookup()) on my machine. Signed-off-by: OGAWA Hirofumi Reported-by: Marvin Cc: Trond Myklebust Signed-off-by: Andrew Morton Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 2c5ace4f00a7..3c7f03b669fb 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1615,6 +1615,7 @@ static int nfs_rename(struct inode *old_dir, struct dentry *old_dentry, goto out; new_dentry = dentry; + rehash = NULL; new_inode = NULL; } } From 02b763b8ccc88d030117851f2b76a119932f109e Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 6 Jan 2010 16:24:30 +0100 Subject: [PATCH 0442/1626] [IA64] use helpers for rlimits Make sure compiler won't do weird things with limits. E.g. fetching them twice may return 2 different values after writable limits are implemented. I.e. either use rlimit helpers added in 3e10e716abf3c71bdb5d86b8f507f9e72236c9cd or ACCESS_ONCE if not applicable. Signed-off-by: Jiri Slaby Cc: Fenghua Yu Signed-off-by: Tony Luck --- arch/ia64/kernel/perfmon.c | 2 +- arch/ia64/mm/init.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 5246285a95fb..6bcbe215b9a4 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -2293,7 +2293,7 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t * if ((mm->total_vm << PAGE_SHIFT) + len> task->rlim[RLIMIT_AS].rlim_cur) * return -ENOMEM; */ - if (size > task->signal->rlim[RLIMIT_MEMLOCK].rlim_cur) + if (size > task_rlimit(task, RLIMIT_MEMLOCK)) return -ENOMEM; /* diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index b9609c69343a..7c0d4814a68d 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -91,7 +91,7 @@ dma_mark_clean(void *addr, size_t size) inline void ia64_set_rbs_bot (void) { - unsigned long stack_size = current->signal->rlim[RLIMIT_STACK].rlim_max & -16; + unsigned long stack_size = rlimit_max(RLIMIT_STACK) & -16; if (stack_size > MAX_USER_STACK_SIZE) stack_size = MAX_USER_STACK_SIZE; From 410dc0aac63d1500faeabcbaecce4f4266380ed1 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Wed, 6 Jan 2010 15:52:35 -0800 Subject: [PATCH 0443/1626] [IA64] sanity in #include files. Move fnptr to types.h Signed-off-by: Tony Luck --- arch/ia64/include/asm/ftrace.h | 1 - arch/ia64/include/asm/kprobes.h | 5 ----- arch/ia64/include/asm/types.h | 5 +++++ 3 files changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/ia64/include/asm/ftrace.h b/arch/ia64/include/asm/ftrace.h index d20db3c2a656..fbd1a2470cae 100644 --- a/arch/ia64/include/asm/ftrace.h +++ b/arch/ia64/include/asm/ftrace.h @@ -8,7 +8,6 @@ extern void _mcount(unsigned long pfs, unsigned long r1, unsigned long b0, unsigned long r0); #define mcount _mcount -#include /* In IA64, MCOUNT_ADDR is set in link time, so it's not a constant at compile time */ #define MCOUNT_ADDR (((struct fnptr *)mcount)->ip) #define FTRACE_ADDR (((struct fnptr *)ftrace_caller)->ip) diff --git a/arch/ia64/include/asm/kprobes.h b/arch/ia64/include/asm/kprobes.h index dbf83fb28db3..d5505d6f2382 100644 --- a/arch/ia64/include/asm/kprobes.h +++ b/arch/ia64/include/asm/kprobes.h @@ -103,11 +103,6 @@ typedef struct kprobe_opcode { bundle_t bundle; } kprobe_opcode_t; -struct fnptr { - unsigned long ip; - unsigned long gp; -}; - /* Architecture specific copy of original instruction*/ struct arch_specific_insn { /* copy of the instruction to be emulated */ diff --git a/arch/ia64/include/asm/types.h b/arch/ia64/include/asm/types.h index bcd260e597de..b8e5d97be158 100644 --- a/arch/ia64/include/asm/types.h +++ b/arch/ia64/include/asm/types.h @@ -30,6 +30,11 @@ typedef unsigned int umode_t; +struct fnptr { + unsigned long ip; + unsigned long gp; +}; + /* * These aren't exported outside the kernel to avoid name space clashes */ From 5ded3dc6a3c7549b36a8ac27bbd81b33756a2c29 Mon Sep 17 00:00:00 2001 From: David Sharp Date: Wed, 6 Jan 2010 17:12:07 -0800 Subject: [PATCH 0444/1626] ring-buffer: Wrap a list.next reference with rb_list_head() This reference at the end of rb_get_reader_page() was causing off-by-one writes to the prev pointer of the page after the reader page when that page is the head page, and therefore the reader page has the RB_PAGE_HEAD flag in its list.next pointer. This eventually results in a GPF in a subsequent call to rb_set_head_page() (usually from rb_get_reader_page()) when that prev pointer is dereferenced. The dereferenced register would characteristically have an address that appears shifted left by one byte (eg, ffxxxxxxxxxxxxyy instead of ffffxxxxxxxxxxxx) due to being written at an address one byte too high. Signed-off-by: David Sharp LKML-Reference: <1262826727-9090-1-git-send-email-dhsharp@google.com> Signed-off-by: Steven Rostedt --- kernel/trace/ring_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 2326b04c95c4..d5b7308b7e1b 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2906,7 +2906,7 @@ rb_get_reader_page(struct ring_buffer_per_cpu *cpu_buffer) * * Now make the new head point back to the reader page. */ - reader->list.next->prev = &cpu_buffer->reader_page->list; + rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list; rb_inc_page(cpu_buffer, &cpu_buffer->head_page); /* Finally update the reader page to the new head */ From 0e1ff5d72a6393f2ef5dbf74f58bb55a12d63834 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 6 Jan 2010 20:40:44 -0500 Subject: [PATCH 0445/1626] ring-buffer: Add rb_list_head() wrapper around new reader page next field If the very unlikely case happens where the writer moves the head by one between where the head page is read and where the new reader page is assigned _and_ the writer then writes and wraps the entire ring buffer so that the head page is back to what was originally read as the head page, the page to be swapped will have a corrupted next pointer. Simple solution is to wrap the assignment of the next pointer with a rb_list_head(). Signed-off-by: Steven Rostedt --- kernel/trace/ring_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index d5b7308b7e1b..edefe3b2801b 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2869,7 +2869,7 @@ rb_get_reader_page(struct ring_buffer_per_cpu *cpu_buffer) * Splice the empty reader page into the list around the head. */ reader = rb_set_head_page(cpu_buffer); - cpu_buffer->reader_page->list.next = reader->list.next; + cpu_buffer->reader_page->list.next = rb_list_head(reader->list.next); cpu_buffer->reader_page->list.prev = reader->list.prev; /* From 04e4f2b18c8de1389d1e00fef0f42a8099910daf Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 6 Jan 2010 17:23:17 +0000 Subject: [PATCH 0446/1626] FDPIC: Respect PT_GNU_STACK exec protection markings when creating NOMMU stack The current code will load the stack size and protection markings, but then only use the markings in the MMU code path. The NOMMU code path always passes PROT_EXEC to the mmap() call. While this doesn't matter to most people whilst the code is running, it will cause a pointless icache flush when starting every FDPIC application. Typically this icache flush will be of a region on the order of 128KB in size, or may be the entire icache, depending on the facilities available on the CPU. In the case where the arch default behaviour seems to be desired (EXSTACK_DEFAULT), we probe VM_STACK_FLAGS for VM_EXEC to determine whether we should be setting PROT_EXEC or not. For arches that support an MPU (Memory Protection Unit - an MMU without the virtual mapping capability), setting PROT_EXEC or not will make an important difference. It should be noted that this change also affects the executability of the brk region, since ELF-FDPIC has that share with the stack. However, this is probably irrelevant as NOMMU programs aren't likely to use the brk region, preferring instead allocation via mmap(). Signed-off-by: Mike Frysinger Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/blackfin/include/asm/page.h | 5 +++++ arch/frv/include/asm/page.h | 2 -- fs/binfmt_elf_fdpic.c | 13 +++++++++++-- 3 files changed, 16 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h index 944a07c6cfd6..1d04e4078340 100644 --- a/arch/blackfin/include/asm/page.h +++ b/arch/blackfin/include/asm/page.h @@ -10,4 +10,9 @@ #include #define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) +#define VM_DATA_DEFAULT_FLAGS \ + (VM_READ | VM_WRITE | \ + ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + #endif diff --git a/arch/frv/include/asm/page.h b/arch/frv/include/asm/page.h index 25c6a5002355..8c97068ac8fc 100644 --- a/arch/frv/include/asm/page.h +++ b/arch/frv/include/asm/page.h @@ -63,12 +63,10 @@ extern unsigned long max_pfn; #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) -#ifdef CONFIG_MMU #define VM_DATA_DEFAULT_FLAGS \ (VM_READ | VM_WRITE | \ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) -#endif #endif /* __ASSEMBLY__ */ diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index 7dc85997e96c..c57d9ce5ff7e 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -170,6 +170,9 @@ static int load_elf_fdpic_binary(struct linux_binprm *bprm, unsigned long stack_size, entryaddr; #ifdef ELF_FDPIC_PLAT_INIT unsigned long dynaddr; +#endif +#ifndef CONFIG_MMU + unsigned long stack_prot; #endif struct file *interpreter = NULL; /* to shut gcc up */ char *interpreter_name = NULL; @@ -316,6 +319,8 @@ static int load_elf_fdpic_binary(struct linux_binprm *bprm, * defunct, deceased, etc. after this point we have to exit via * error_kill */ set_personality(PER_LINUX_FDPIC); + if (elf_read_implies_exec(&exec_params.hdr, executable_stack)) + current->personality |= READ_IMPLIES_EXEC; set_binfmt(&elf_fdpic_format); current->mm->start_code = 0; @@ -377,9 +382,13 @@ static int load_elf_fdpic_binary(struct linux_binprm *bprm, if (stack_size < PAGE_SIZE * 2) stack_size = PAGE_SIZE * 2; + stack_prot = PROT_READ | PROT_WRITE; + if (executable_stack == EXSTACK_ENABLE_X || + (executable_stack == EXSTACK_DEFAULT && VM_STACK_FLAGS & VM_EXEC)) + stack_prot |= PROT_EXEC; + down_write(¤t->mm->mmap_sem); - current->mm->start_brk = do_mmap(NULL, 0, stack_size, - PROT_READ | PROT_WRITE | PROT_EXEC, + current->mm->start_brk = do_mmap(NULL, 0, stack_size, stack_prot, MAP_PRIVATE | MAP_ANONYMOUS | MAP_UNINITIALIZED | MAP_GROWSDOWN, 0); From cfe79c00a2f4f687eed8b7534d1d3d3d35540c29 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 6 Jan 2010 17:23:23 +0000 Subject: [PATCH 0447/1626] NOMMU: Avoiding duplicate icache flushes of shared maps When working with FDPIC, there are many shared mappings of read-only code regions between applications (the C library, applet packages like busybox, etc.), but the current do_mmap_pgoff() function will issue an icache flush whenever a VMA is added to an MM instead of only doing it when the map is initially created. The flush can instead be done when a region is first mmapped PROT_EXEC. Note that we may not rely on the first mapping of a region being executable - it's possible for it to be PROT_READ only, so we have to remember whether we've flushed the region or not, and then flush the entire region when a bit of it is made executable. However, this also affects the brk area. That will no longer be executable. We can mprotect() it to PROT_EXEC on MPU-mode kernels, but for NOMMU mode kernels, when it increases the brk allocation, making sys_brk() flush the extra from the icache should suffice. The brk area probably isn't used by NOMMU programs since the brk area can only use up the leavings from the stack allocation, where the stack allocation is larger than requested. Signed-off-by: David Howells Signed-off-by: Mike Frysinger Signed-off-by: Linus Torvalds --- include/linux/mm_types.h | 2 ++ mm/nommu.c | 11 ++++++++--- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 84a524afb3dc..84d020bed083 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -123,6 +123,8 @@ struct vm_region { struct file *vm_file; /* the backing file or NULL */ atomic_t vm_usage; /* region usage count */ + bool vm_icache_flushed : 1; /* true if the icache has been flushed for + * this region */ }; /* diff --git a/mm/nommu.c b/mm/nommu.c index 6f9248f89bde..a8d17521624a 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -432,6 +432,7 @@ SYSCALL_DEFINE1(brk, unsigned long, brk) /* * Ok, looks good - let it rip. */ + flush_icache_range(mm->brk, brk); return mm->brk = brk; } @@ -1353,10 +1354,14 @@ unsigned long do_mmap_pgoff(struct file *file, share: add_vma_to_mm(current->mm, vma); - up_write(&nommu_region_sem); + /* we flush the region from the icache only when the first executable + * mapping of it is made */ + if (vma->vm_flags & VM_EXEC && !region->vm_icache_flushed) { + flush_icache_range(region->vm_start, region->vm_end); + region->vm_icache_flushed = true; + } - if (prot & PROT_EXEC) - flush_icache_range(result, result + len); + up_write(&nommu_region_sem); kleave(" = %lx", result); return result; From 7959722b951cffcd61a0a35229d007deeed8c2dd Mon Sep 17 00:00:00 2001 From: Jie Zhang Date: Wed, 6 Jan 2010 17:23:28 +0000 Subject: [PATCH 0448/1626] NOMMU: Use copy_*_user_page() in access_process_vm() The MMU code uses the copy_*_user_page() variants in access_process_vm() rather than copy_*_user() as the former includes an icache flush. This is important when doing things like setting software breakpoints with gdb. So switch the NOMMU code over to do the same. This patch makes the reasonable assumption that copy_from_user_page() won't fail - which is probably fine, as we've checked the VMA from which we're copying is usable, and the copy is not allowed to cross VMAs. The one case where it might go wrong is if the VMA is a device rather than RAM, and that device returns an error which - in which case rubbish will be returned rather than EIO. Signed-off-by: Jie Zhang Signed-off-by: Mike Frysinger Signed-off-by: David Howells Acked-by: David McCullough Acked-by: Paul Mundt Acked-by: Greg Ungerer Signed-off-by: Linus Torvalds --- mm/nommu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/nommu.c b/mm/nommu.c index a8d17521624a..17773862619b 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1921,9 +1921,11 @@ int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, in /* only read or write mappings where it is permitted */ if (write && vma->vm_flags & VM_MAYWRITE) - len -= copy_to_user((void *) addr, buf, len); + copy_to_user_page(vma, NULL, addr, + (void *) addr, buf, len); else if (!write && vma->vm_flags & VM_MAYREAD) - len -= copy_from_user(buf, (void *) addr, len); + copy_from_user_page(vma, NULL, addr, + buf, (void *) addr, len); else len = 0; } else { From 87d26d2d119953d07fdaa6435f324e8cb2e6f475 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 7 Jan 2010 11:05:55 +0900 Subject: [PATCH 0449/1626] ARM: S3C64XX: Fix possible clock look in EPLL and MPLL clock chains There is a possibility of a loop happening in the PLL output clock chain on the S3C64XX series. clk_mpll's parent was set to be clk_mout_mpll, but this is fed from clk_fout_epll (which is also clk_mpll). clk_mpll is meant to be the output from the MPLL, and clk_mout_mpll is a seperate clock derived from the mux of clk_mpll and clk_fin_mpll and thus should be considered a seperate clock. Anything using clk_mpll directly really should not be relying on this being the clock that is eventually routed to a peripheral, so remove the loop and ensure that the clocks accurately represent the clock chain in the device. The clk_mpll is not being used outside of the s3c6400-clock.c code, so this change should not break anything else. Do the same for the EPLL. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 6ffa21eb1b91..ffd56deb9e81 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -46,6 +46,7 @@ static struct clk clk_ext_xtal_mux = { #define clk_fin_epll clk_ext_xtal_mux #define clk_fout_mpll clk_mpll +#define clk_fout_epll clk_epll struct clk_sources { unsigned int nr_sources; @@ -88,11 +89,6 @@ static struct clksrc_clk clk_mout_apll = { .sources = &clk_src_apll, }; -static struct clk clk_fout_epll = { - .name = "fout_epll", - .id = -1, -}; - static struct clk *clk_src_epll_list[] = { [0] = &clk_fin_epll, [1] = &clk_fout_epll, @@ -715,7 +711,6 @@ static struct clk *clks[] __initdata = { &clk_iis_cd1, &clk_pcm_cd, &clk_mout_epll.clk, - &clk_fout_epll, &clk_mout_mpll.clk, &clk_dout_mpll, &clk_mmc0.clk, @@ -760,7 +755,4 @@ void __init s3c6400_register_clocks(unsigned armclk_divlimit) clkp->name, ret); } } - - clk_mpll.parent = &clk_mout_mpll.clk; - clk_epll.parent = &clk_mout_epll.clk; } From e6be8d9d17bd44061116f601fe2609b3ace7aa69 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Tue, 5 Jan 2010 11:25:05 +0800 Subject: [PATCH 0450/1626] drm: remove address mask param for drm_pci_alloc() drm_pci_alloc() has input of address mask for setting pci dma mask on the device, which should be properly setup by drm driver. And leave it as a param for drm_pci_alloc() would cause confusion or mistake would corrupt the correct dma mask setting, as seen on intel hw which set wrong dma mask for hw status page. So remove it from drm_pci_alloc() function. Signed-off-by: Zhenyu Wang Signed-off-by: Dave Airlie --- drivers/gpu/drm/ati_pcigart.c | 10 ++++++++-- drivers/gpu/drm/drm_bufs.c | 4 ++-- drivers/gpu/drm/drm_pci.c | 8 +------- drivers/gpu/drm/i915/i915_dma.c | 2 +- drivers/gpu/drm/i915/i915_gem.c | 2 +- include/drm/drmP.h | 2 +- 6 files changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/ati_pcigart.c b/drivers/gpu/drm/ati_pcigart.c index 628eae3e9b83..a1fce68e3bbe 100644 --- a/drivers/gpu/drm/ati_pcigart.c +++ b/drivers/gpu/drm/ati_pcigart.c @@ -39,8 +39,7 @@ static int drm_ati_alloc_pcigart_table(struct drm_device *dev, struct drm_ati_pcigart_info *gart_info) { gart_info->table_handle = drm_pci_alloc(dev, gart_info->table_size, - PAGE_SIZE, - gart_info->table_mask); + PAGE_SIZE); if (gart_info->table_handle == NULL) return -ENOMEM; @@ -112,6 +111,13 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga if (gart_info->gart_table_location == DRM_ATI_GART_MAIN) { DRM_DEBUG("PCI: no table in VRAM: using normal RAM\n"); + if (pci_set_dma_mask(dev->pdev, gart_info->table_mask)) { + DRM_ERROR("fail to set dma mask to 0x%Lx\n", + gart_info->table_mask); + ret = 1; + goto done; + } + ret = drm_ati_alloc_pcigart_table(dev, gart_info); if (ret) { DRM_ERROR("cannot allocate PCI GART page!\n"); diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index 3d09e304f6f4..8417cc4c43f1 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -326,7 +326,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset, * As we're limiting the address to 2^32-1 (or less), * casting it down to 32 bits is no problem, but we * need to point to a 64bit variable first. */ - dmah = drm_pci_alloc(dev, map->size, map->size, 0xffffffffUL); + dmah = drm_pci_alloc(dev, map->size, map->size); if (!dmah) { kfree(map); return -ENOMEM; @@ -885,7 +885,7 @@ int drm_addbufs_pci(struct drm_device * dev, struct drm_buf_desc * request) while (entry->buf_count < count) { - dmah = drm_pci_alloc(dev, PAGE_SIZE << page_order, 0x1000, 0xfffffffful); + dmah = drm_pci_alloc(dev, PAGE_SIZE << page_order, 0x1000); if (!dmah) { /* Set count correctly so we free the proper amount. */ diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c index 577094fb1995..e68ebf92fa2a 100644 --- a/drivers/gpu/drm/drm_pci.c +++ b/drivers/gpu/drm/drm_pci.c @@ -47,8 +47,7 @@ /** * \brief Allocate a PCI consistent memory block, for DMA. */ -drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t align, - dma_addr_t maxaddr) +drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t align) { drm_dma_handle_t *dmah; #if 1 @@ -63,11 +62,6 @@ drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t ali if (align > size) return NULL; - if (pci_set_dma_mask(dev->pdev, maxaddr) != 0) { - DRM_ERROR("Setting pci dma mask failed\n"); - return NULL; - } - dmah = kmalloc(sizeof(drm_dma_handle_t), GFP_KERNEL); if (!dmah) return NULL; diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 701bfeac7f57..02607ed61399 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -123,7 +123,7 @@ static int i915_init_phys_hws(struct drm_device *dev) drm_i915_private_t *dev_priv = dev->dev_private; /* Program Hardware Status Page */ dev_priv->status_page_dmah = - drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, 0xffffffff); + drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE); if (!dev_priv->status_page_dmah) { DRM_ERROR("Can not allocate hardware status page\n"); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 917b8377ae28..c7f0cbec4e84 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4708,7 +4708,7 @@ int i915_gem_init_phys_object(struct drm_device *dev, phys_obj->id = id; - phys_obj->handle = drm_pci_alloc(dev, size, 0, 0xffffffff); + phys_obj->handle = drm_pci_alloc(dev, size, 0); if (!phys_obj->handle) { ret = -ENOMEM; goto kfree_obj; diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 71dafb69cfeb..ffac157fb5b2 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -1408,7 +1408,7 @@ extern int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info * gart_info); extern drm_dma_handle_t *drm_pci_alloc(struct drm_device *dev, size_t size, - size_t align, dma_addr_t maxaddr); + size_t align); extern void __drm_pci_free(struct drm_device *dev, drm_dma_handle_t * dmah); extern void drm_pci_free(struct drm_device *dev, drm_dma_handle_t * dmah); From 69da301589b579f9619475e30cc449df9193410c Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Mon, 4 Jan 2010 17:53:06 -0500 Subject: [PATCH 0451/1626] drm/edid: Skip empty CVT codepoints Signed-off-by: Adam Jackson Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 5c9f79877cbf..7d6ac22f5b2d 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -911,11 +911,15 @@ static int drm_cvt_modes(struct drm_connector *connector, struct drm_device *dev = connector->dev; struct cvt_timing *cvt; const int rates[] = { 60, 85, 75, 60, 50 }; + const u8 empty[3] = { 0, 0, 0 }; for (i = 0; i < 4; i++) { int uninitialized_var(width), height; cvt = &(timing->data.other_data.data.cvt[i]); + if (!memcmp(cvt->code, empty, 3)) + continue; + height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 8) + 1) * 2; switch (cvt->code[1] & 0xc0) { case 0x00: From 8e10ee9a0da12c586d3397150e34a946507c23f3 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Mon, 4 Jan 2010 17:53:07 -0500 Subject: [PATCH 0452/1626] drm/edid: Fix CVT width/height decode Signed-off-by: Adam Jackson Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 7d6ac22f5b2d..defcaf108460 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -920,18 +920,18 @@ static int drm_cvt_modes(struct drm_connector *connector, if (!memcmp(cvt->code, empty, 3)) continue; - height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 8) + 1) * 2; - switch (cvt->code[1] & 0xc0) { + height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 4) + 1) * 2; + switch (cvt->code[1] & 0x0c) { case 0x00: width = height * 4 / 3; break; - case 0x40: + case 0x04: width = height * 16 / 9; break; - case 0x80: + case 0x08: width = height * 16 / 10; break; - case 0xc0: + case 0x0c: width = height * 15 / 9; break; } From e89a8c901ca94a47c0e0b2fb335623d810e37545 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 31 Dec 2009 13:06:29 +0100 Subject: [PATCH 0453/1626] drm/kms: Fix &&/|| confusion in drm_fb_helper_connector_parse_command_line() This always evaluates to true. Signed-off-by: Roel Kluin Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 1b49fa055f4f..100ee48760b7 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -156,7 +156,7 @@ static bool drm_fb_helper_connector_parse_command_line(struct drm_connector *con force = DRM_FORCE_ON; break; case 'D': - if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) || + if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) && (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB)) force = DRM_FORCE_ON; else From 5eb226132f53d5ec36ce4e7ff9d6b49cceb50f3d Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 6 Jan 2010 17:39:31 +0100 Subject: [PATCH 0454/1626] drm/radeon/kms: fix memory leak Stanse found a memory leak in radeon_master_create. master_priv is not freed/assigned on all paths. Fix that. Signed-off-by: Jiri Slaby Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_cp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 0b2f9c2ad2c1..06123ba31d31 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -2145,6 +2145,7 @@ int radeon_master_create(struct drm_device *dev, struct drm_master *master) &master_priv->sarea); if (ret) { DRM_ERROR("SAREA setup failed\n"); + kfree(master_priv); return ret; } master_priv->sarea_priv = master_priv->sarea->handle + sizeof(struct drm_sarea); From d8a7f79246a447722bd90c2c4ba3ca068b2aa4c0 Mon Sep 17 00:00:00 2001 From: Darren Jenkins Date: Wed, 30 Dec 2009 12:22:55 +1100 Subject: [PATCH 0455/1626] drm/radeon/radeon_connectors.c: add a NULL test before dereference The encoder variable can be NULL in this function so I believe it should be checked before dereference. Coverity CID: 13253 [airlied: extremely unlikely to happen] Signed-off-by: Darren Jenkins Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 20161567dbff..b82ae61d4d17 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -615,7 +615,7 @@ static enum drm_connector_status radeon_vga_detect(struct drm_connector *connect ret = connector_status_connected; } } else { - if (radeon_connector->dac_load_detect) { + if (radeon_connector->dac_load_detect && encoder) { encoder_funcs = encoder->helper_private; ret = encoder_funcs->detect(encoder, connector); } From 3655d54af8dd85788c3e5088387469703a0f8f12 Mon Sep 17 00:00:00 2001 From: Darren Jenkins Date: Wed, 30 Dec 2009 12:20:05 +1100 Subject: [PATCH 0456/1626] drm/radeon/radeon_fence.c: move a dereference below the NULL test If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13334 Signed-off-by: Darren Jenkins Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_fence.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index 4cdd8b4f7549..8495d4e32e18 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -140,16 +140,15 @@ int radeon_fence_create(struct radeon_device *rdev, struct radeon_fence **fence) bool radeon_fence_signaled(struct radeon_fence *fence) { - struct radeon_device *rdev = fence->rdev; unsigned long irq_flags; bool signaled = false; - if (rdev->gpu_lockup) { + if (!fence) return true; - } - if (fence == NULL) { + + if (fence->rdev->gpu_lockup) return true; - } + write_lock_irqsave(&fence->rdev->fence_drv.lock, irq_flags); signaled = fence->signaled; /* if we are shuting down report all fence as signaled */ From 875c186620e017e62b773c93e46af21bb704fe6b Mon Sep 17 00:00:00 2001 From: Darren Jenkins Date: Wed, 30 Dec 2009 12:18:30 +1100 Subject: [PATCH 0457/1626] drm/radeon/radeon_device.c: move a dereference below a NULL test If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13335 Signed-off-by: Darren Jenkins Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_device.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 7c6848096bcd..0c51f8e46613 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -733,16 +733,18 @@ void radeon_device_fini(struct radeon_device *rdev) */ int radeon_suspend_kms(struct drm_device *dev, pm_message_t state) { - struct radeon_device *rdev = dev->dev_private; + struct radeon_device *rdev; struct drm_crtc *crtc; int r; - if (dev == NULL || rdev == NULL) { + if (dev == NULL || dev->dev_private == NULL) { return -ENODEV; } if (state.event == PM_EVENT_PRETHAW) { return 0; } + rdev = dev->dev_private; + /* unpin the front buffers */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { struct radeon_framebuffer *rfb = to_radeon_framebuffer(crtc->fb); From 65aa2f4e8d85b6145ef4834f440a63ab68bd7443 Mon Sep 17 00:00:00 2001 From: Darren Jenkins Date: Wed, 30 Dec 2009 12:16:35 +1100 Subject: [PATCH 0458/1626] gpu/drm/radeon/radeon_irq.c: move a dereference below a NULL test If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13338 Signed-off-by: Darren Jenkins Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_irq.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c index b79ecc4a7cc4..2f349a300195 100644 --- a/drivers/gpu/drm/radeon/radeon_irq.c +++ b/drivers/gpu/drm/radeon/radeon_irq.c @@ -289,16 +289,16 @@ int radeon_irq_emit(struct drm_device *dev, void *data, struct drm_file *file_pr drm_radeon_irq_emit_t *emit = data; int result; - if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R600) - return -EINVAL; - - LOCK_TEST_WITH_RETURN(dev, file_priv); - if (!dev_priv) { DRM_ERROR("called with no initialization\n"); return -EINVAL; } + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R600) + return -EINVAL; + + LOCK_TEST_WITH_RETURN(dev, file_priv); + result = radeon_emit_irq(dev); if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) { From 43b19f161c7a9941e3aa7db0e3ee19b93980e3d7 Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Mon, 28 Dec 2009 22:53:05 +0100 Subject: [PATCH 0459/1626] drm/radeon/kms: rs600: use correct mask for SW interrupt The mask happens to be the same, but the IH is reading the status, not the not the control register. Signed-off-by: Luca Tettamanti Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/rs600.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 4f8ea4260572..4245218e954f 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -396,7 +396,7 @@ int rs600_irq_process(struct radeon_device *rdev) } while (status || r500_disp_int) { /* SW interrupt */ - if (G_000040_SW_INT_EN(status)) + if (G_000044_SW_INT(status)) radeon_fence_process(rdev); /* Vertical blank interrupts */ if (G_007EDC_LB_D1_VBLANK_INTERRUPT(r500_disp_int)) From 58933c643f86651decc4818cf680f9ec3b0460d2 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Wed, 6 Jan 2010 20:32:38 -0800 Subject: [PATCH 0460/1626] ucc_geth: Fix the wrong the Rx/Tx FIFO size current the Rx/Tx FIFO size settings cause problem when four UEC ethernets work simultaneously. eg: GETH1, UEM-J15, GETH2, UEC-J5 on 8569MDS board $ ifconfig eth0 10.193.20.166 $ ifconfig eth1 10.193.20.167 $ ifconfig eth2 10.193.20.168 then $ ifconfig eth3 10.193.20.169 The fourth ethernet will cause all of interface broken, you cann't ping successfully any more. The patch fix this issue for MPC8569 Rev1.0 and Rev2.0 Signed-off-by: Dave Liu Acked-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/ucc_geth.h | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h index a007e2acf651..ef1fbeb11c6e 100644 --- a/drivers/net/ucc_geth.h +++ b/drivers/net/ucc_geth.h @@ -838,13 +838,13 @@ struct ucc_geth_hardware_statistics { using the maximum is easier */ #define UCC_GETH_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT 32 -#define UCC_GETH_SCHEDULER_ALIGNMENT 4 /* This is a guess */ +#define UCC_GETH_SCHEDULER_ALIGNMENT 8 /* This is a guess */ #define UCC_GETH_TX_STATISTICS_ALIGNMENT 4 /* This is a guess */ #define UCC_GETH_RX_STATISTICS_ALIGNMENT 4 /* This is a guess */ #define UCC_GETH_RX_INTERRUPT_COALESCING_ALIGNMENT 64 #define UCC_GETH_RX_BD_QUEUES_ALIGNMENT 8 /* This is a guess */ #define UCC_GETH_RX_PREFETCHED_BDS_ALIGNMENT 128 /* This is a guess */ -#define UCC_GETH_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT 4 /* This +#define UCC_GETH_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT 8 /* This is a guess */ @@ -899,16 +899,17 @@ struct ucc_geth_hardware_statistics { #define UCC_GETH_UTFS_INIT 512 /* Tx virtual FIFO size */ #define UCC_GETH_UTFET_INIT 256 /* 1/2 utfs */ -#define UCC_GETH_UTFTT_INIT 128 +#define UCC_GETH_UTFTT_INIT 512 /* Gigabit Ethernet (1000 Mbps) */ #define UCC_GETH_URFS_GIGA_INIT 4096/*2048*/ /* Rx virtual FIFO size */ #define UCC_GETH_URFET_GIGA_INIT 2048/*1024*/ /* 1/2 urfs */ #define UCC_GETH_URFSET_GIGA_INIT 3072/*1536*/ /* 3/4 urfs */ -#define UCC_GETH_UTFS_GIGA_INIT 8192/*2048*/ /* Tx virtual +#define UCC_GETH_UTFS_GIGA_INIT 4096/*2048*/ /* Tx virtual + FIFO size */ +#define UCC_GETH_UTFET_GIGA_INIT 2048/*1024*/ /* 1/2 utfs */ +#define UCC_GETH_UTFTT_GIGA_INIT 4096/*0x40*/ /* Tx virtual FIFO size */ -#define UCC_GETH_UTFET_GIGA_INIT 4096/*1024*/ /* 1/2 utfs */ -#define UCC_GETH_UTFTT_GIGA_INIT 0x400/*0x40*/ /* */ #define UCC_GETH_REMODER_INIT 0 /* bits that must be set */ From 7ad6848c7e81a603605fad3f3575841aab004eea Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Wed, 6 Jan 2010 20:37:01 -0800 Subject: [PATCH 0461/1626] ip: fix mc_loop checks for tunnels with multicast outer addresses When we have L3 tunnels with different inner/outer families (i.e. IPV4/IPV6) which use a multicast address as the outer tunnel destination address, multicast packets will be loopbacked back to the sending socket even if IP*_MULTICAST_LOOP is set to disabled. The mc_loop flag is present in the family specific part of the socket (e.g. the IPv4 or IPv4 specific part). setsockopt sets the inner family mc_loop flag. When the packet is pushed through the L3 tunnel it will eventually be processed by the outer family which if different will check the flag in a different part of the socket then it was set. Signed-off-by: Octavian Purdila Signed-off-by: David S. Miller --- include/net/ip.h | 16 ++++++++++++++++ net/ipv4/ip_output.c | 2 +- net/ipv6/ip6_output.c | 3 +-- 3 files changed, 18 insertions(+), 3 deletions(-) diff --git a/include/net/ip.h b/include/net/ip.h index 85108cfbb1ae..d9a0e74d8923 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -326,6 +326,22 @@ static __inline__ void inet_reset_saddr(struct sock *sk) #endif +static inline int sk_mc_loop(struct sock *sk) +{ + if (!sk) + return 1; + switch (sk->sk_family) { + case AF_INET: + return inet_sk(sk)->mc_loop; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + case AF_INET6: + return inet6_sk(sk)->mc_loop; +#endif + } + __WARN(); + return 1; +} + extern int ip_call_ra_chain(struct sk_buff *skb); /* diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index e34013a78ef4..3451799e3dbf 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -254,7 +254,7 @@ int ip_mc_output(struct sk_buff *skb) */ if (rt->rt_flags&RTCF_MULTICAST) { - if ((!sk || inet_sk(sk)->mc_loop) + if (sk_mc_loop(sk) #ifdef CONFIG_IP_MROUTE /* Small optimization: do not loopback not local frames, which returned after forwarding; they will be dropped diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index cd48801a8d6f..eb6d09728633 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -121,10 +121,9 @@ static int ip6_output2(struct sk_buff *skb) skb->dev = dev; if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) { - struct ipv6_pinfo* np = skb->sk ? inet6_sk(skb->sk) : NULL; struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb)); - if (!(dev->flags & IFF_LOOPBACK) && (!np || np->mc_loop) && + if (!(dev->flags & IFF_LOOPBACK) && sk_mc_loop(skb->sk) && ((mroute6_socket(dev_net(dev)) && !(IP6CB(skb)->flags & IP6SKB_FORWARDED)) || ipv6_chk_mcast_addr(dev, &ipv6_hdr(skb)->daddr, From abe8806901086b6cb29b4d4d4c616bbff3f0e7e1 Mon Sep 17 00:00:00 2001 From: Ken Kawasaki Date: Wed, 6 Jan 2010 20:37:58 -0800 Subject: [PATCH 0462/1626] pcnet_cs: add cis of KTI PE520 pcmcia network card pcnet_cs,serial_cs: add cis of KTI PE520 pcmcia network card, and serial card(Sierra Wireless AC860). Signed-off-by: Ken Kawasaki Signed-off-by: David S. Miller --- drivers/net/pcmcia/pcnet_cs.c | 4 ++-- drivers/serial/serial_cs.c | 15 ++++++++++++++- firmware/Makefile | 3 ++- firmware/WHENCE | 1 + firmware/cis/PE520.cis.ihex | 9 +++++++++ 5 files changed, 28 insertions(+), 4 deletions(-) create mode 100644 firmware/cis/PE520.cis.ihex diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 2d26b6ca28b9..c2651aecbda3 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1741,7 +1741,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"), PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "cis/PE520.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"), @@ -1754,7 +1754,7 @@ MODULE_DEVICE_TABLE(pcmcia, pcnet_ids); MODULE_FIRMWARE("cis/PCMLM28.cis"); MODULE_FIRMWARE("cis/DP83903.cis"); MODULE_FIRMWARE("cis/LA-PCM.cis"); -MODULE_FIRMWARE("PE520.cis"); +MODULE_FIRMWARE("cis/PE520.cis"); MODULE_FIRMWARE("cis/NE2K.cis"); MODULE_FIRMWARE("cis/PE-200.cis"); MODULE_FIRMWARE("cis/tamarack.cis"); diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index fc413f0f8dd2..0ee7239c5d69 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -819,6 +819,7 @@ static struct pcmcia_device_id serial_ids[] = { PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */ PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ @@ -827,7 +828,7 @@ static struct pcmcia_device_id serial_ids[] = { PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), - PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"), + PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"), PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b), PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83), PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490), @@ -861,6 +862,18 @@ static struct pcmcia_device_id serial_ids[] = { }; MODULE_DEVICE_TABLE(pcmcia, serial_ids); +MODULE_FIRMWARE("cis/PCMLM28.cis"); +MODULE_FIRMWARE("cis/DP83903.cis"); +MODULE_FIRMWARE("cis/3CCFEM556.cis"); +MODULE_FIRMWARE("cis/3CXEM556.cis"); +MODULE_FIRMWARE("cis/SW_8xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_7xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_555_SER.cis"); +MODULE_FIRMWARE("cis/MT5634ZLX.cis"); +MODULE_FIRMWARE("cis/COMpad2.cis"); +MODULE_FIRMWARE("cis/COMpad4.cis"); +MODULE_FIRMWARE("cis/RS-COM-2P.cis"); + static struct pcmcia_driver serial_cs_driver = { .owner = THIS_MODULE, .drv = { diff --git a/firmware/Makefile b/firmware/Makefile index 6d5c3abd06be..1c00d05578f7 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -69,7 +69,8 @@ fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \ fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \ cis/DP83903.cis cis/NE2K.cis \ - cis/tamarack.cis cis/PE-200.cis + cis/tamarack.cis cis/PE-200.cis \ + cis/PE520.cis fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \ diff --git a/firmware/WHENCE b/firmware/WHENCE index 34b5d0a036db..ac174feda7cb 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -601,6 +601,7 @@ File: cis/LA-PCM.cis cis/NE2K.cis cis/tamarack.cis cis/PE-200.cis + cis/PE520.cis Licence: GPL diff --git a/firmware/cis/PE520.cis.ihex b/firmware/cis/PE520.cis.ihex new file mode 100644 index 000000000000..97a745b5496e --- /dev/null +++ b/firmware/cis/PE520.cis.ihex @@ -0,0 +1,9 @@ +:1000000001030000FF152304014B544900504535FE +:10001000323020504C55530050434D434941204508 +:10002000746865726E65740000FF20046101100041 +:10003000210206001A050101D00F0B1B09C101198D +:0A00400001556530FFFF1400FF00BA +:00000001FF +# +# Replacement CIS for PE520 ethernet card +# From d950d1775228e71ca557c86278ae54bd2bcd7c1a Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Mon, 4 Jan 2010 03:14:45 +0000 Subject: [PATCH 0463/1626] claw: use "claw" as root device name Claw module cannot be loaded together with qeth, because "qeth" has been errorneously used as root device name. It is changed into "claw". Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- drivers/s390/net/claw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c index 3c77bfe0764c..147bb1a69aba 100644 --- a/drivers/s390/net/claw.c +++ b/drivers/s390/net/claw.c @@ -3398,7 +3398,7 @@ claw_init(void) goto out_err; } CLAW_DBF_TEXT(2, setup, "init_mod"); - claw_root_dev = root_device_register("qeth"); + claw_root_dev = root_device_register("claw"); ret = IS_ERR(claw_root_dev) ? PTR_ERR(claw_root_dev) : 0; if (ret) goto register_err; From ec157937d9799cf30c9a19bd18be33721242c64f Mon Sep 17 00:00:00 2001 From: Jan Dumon Date: Tue, 5 Jan 2010 04:50:31 +0000 Subject: [PATCH 0464/1626] hso: Add Vendor/Product ID's for new devices Add product ID's for new devices. Signed-off-by: Jan Dumon Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index f78f0903b073..eb930b2e67c7 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -461,10 +461,17 @@ static const struct usb_device_id hso_ids[] = { {USB_DEVICE(0x0af0, 0x7501)}, /* GTM 382 */ {USB_DEVICE(0x0af0, 0x7601)}, /* GE40x */ {USB_DEVICE(0x0af0, 0x7701)}, + {USB_DEVICE(0x0af0, 0x7706)}, {USB_DEVICE(0x0af0, 0x7801)}, {USB_DEVICE(0x0af0, 0x7901)}, + {USB_DEVICE(0x0af0, 0x7A01)}, + {USB_DEVICE(0x0af0, 0x7A05)}, {USB_DEVICE(0x0af0, 0x8200)}, {USB_DEVICE(0x0af0, 0x8201)}, + {USB_DEVICE(0x0af0, 0x8300)}, + {USB_DEVICE(0x0af0, 0x8302)}, + {USB_DEVICE(0x0af0, 0x8304)}, + {USB_DEVICE(0x0af0, 0x8400)}, {USB_DEVICE(0x0af0, 0xd035)}, {USB_DEVICE(0x0af0, 0xd055)}, {USB_DEVICE(0x0af0, 0xd155)}, @@ -473,6 +480,8 @@ static const struct usb_device_id hso_ids[] = { {USB_DEVICE(0x0af0, 0xd157)}, {USB_DEVICE(0x0af0, 0xd257)}, {USB_DEVICE(0x0af0, 0xd357)}, + {USB_DEVICE(0x0af0, 0xd058)}, + {USB_DEVICE(0x0af0, 0xc100)}, {} }; MODULE_DEVICE_TABLE(usb, hso_ids); From d9ced80d1084758772d350ac66b1ad0eeefc7f95 Mon Sep 17 00:00:00 2001 From: Jan Dumon Date: Tue, 5 Jan 2010 04:51:02 +0000 Subject: [PATCH 0465/1626] hso: Fix for endian issues on big endian machines Some fields are always little endian and have to be converted on big endian machines. Signed-off-by: Jan Dumon Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index eb930b2e67c7..aba90e77e077 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1028,7 +1028,8 @@ static void read_bulk_callback(struct urb *urb) if (odev->parent->port_spec & HSO_INFO_CRC_BUG) { u32 rest; u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF }; - rest = urb->actual_length % odev->in_endp->wMaxPacketSize; + rest = urb->actual_length % + le16_to_cpu(odev->in_endp->wMaxPacketSize); if (((rest == 5) || (rest == 6)) && !memcmp(((u8 *) urb->transfer_buffer) + urb->actual_length - 4, crc_check, 4)) { @@ -1234,7 +1235,7 @@ static void hso_std_serial_read_bulk_callback(struct urb *urb) u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF }; rest = urb->actual_length % - serial->in_endp->wMaxPacketSize; + le16_to_cpu(serial->in_endp->wMaxPacketSize); if (((rest == 5) || (rest == 6)) && !memcmp(((u8 *) urb->transfer_buffer) + urb->actual_length - 4, crc_check, 4)) { @@ -2843,8 +2844,9 @@ struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface) dev_err(&interface->dev, "Could not allocate intr urb?"); goto exit; } - mux->shared_intr_buf = kzalloc(mux->intr_endp->wMaxPacketSize, - GFP_KERNEL); + mux->shared_intr_buf = + kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize), + GFP_KERNEL); if (!mux->shared_intr_buf) { dev_err(&interface->dev, "Could not allocate intr buf?"); goto exit; @@ -3241,7 +3243,7 @@ static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int, usb_rcvintpipe(usb, shared_int->intr_endp->bEndpointAddress & 0x7F), shared_int->shared_intr_buf, - shared_int->intr_endp->wMaxPacketSize, + 1, intr_callback, shared_int, shared_int->intr_endp->bInterval); From f4763e96c08ea0790750603999e5b3158c3b50d4 Mon Sep 17 00:00:00 2001 From: Jan Dumon Date: Tue, 5 Jan 2010 04:51:28 +0000 Subject: [PATCH 0466/1626] hso: don't change the state of a closed port Don't change the state of a port if it's not open. This fixes an issue where a port sometimes has to be opened twice before data can be received. Signed-off-by: Jan Dumon Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index aba90e77e077..fb1c5ac55c01 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1915,18 +1915,18 @@ static void intr_callback(struct urb *urb) if (serial != NULL) { D1("Pending read interrupt on port %d\n", i); spin_lock(&serial->serial_lock); - if (serial->rx_state == RX_IDLE) { + if (serial->rx_state == RX_IDLE && + serial->open_count > 0) { /* Setup and send a ctrl req read on * port i */ - if (!serial->rx_urb_filled[0]) { + if (!serial->rx_urb_filled[0]) { serial->rx_state = RX_SENT; hso_mux_serial_read(serial); } else serial->rx_state = RX_PENDING; - } else { - D1("Already pending a read on " - "port %d\n", i); + D1("Already a read pending on " + "port %d or port not open\n", i); } spin_unlock(&serial->serial_lock); } From 68a351c501ad22077a969df157cd13367cb43a40 Mon Sep 17 00:00:00 2001 From: Jan Dumon Date: Tue, 5 Jan 2010 04:52:13 +0000 Subject: [PATCH 0467/1626] hso: Attempt to recover from usb bus errors Attempt to reset the usb device when we receive usb bus errors. Signed-off-by: Jan Dumon Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 54 +++++++++++++++++++++++++++++++++++-------- 1 file changed, 44 insertions(+), 10 deletions(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index fb1c5ac55c01..7482d0d5e278 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -286,6 +286,7 @@ struct hso_device { u8 usb_gone; struct work_struct async_get_intf; struct work_struct async_put_intf; + struct work_struct reset_device; struct usb_device *usb; struct usb_interface *interface; @@ -332,7 +333,8 @@ static void hso_kick_transmit(struct hso_serial *serial); /* Helper functions */ static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int, struct usb_device *usb, gfp_t gfp); -static void log_usb_status(int status, const char *function); +static void handle_usb_error(int status, const char *function, + struct hso_device *hso_dev); static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf, int type, int dir); static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports); @@ -350,6 +352,7 @@ static void async_put_intf(struct work_struct *data); static int hso_put_activity(struct hso_device *hso_dev); static int hso_get_activity(struct hso_device *hso_dev); static void tiocmget_intr_callback(struct urb *urb); +static void reset_device(struct work_struct *data); /*****************************************************************************/ /* Helping functions */ /*****************************************************************************/ @@ -664,8 +667,8 @@ static void set_serial_by_index(unsigned index, struct hso_serial *serial) spin_unlock_irqrestore(&serial_table_lock, flags); } -/* log a meaningful explanation of an USB status */ -static void log_usb_status(int status, const char *function) +static void handle_usb_error(int status, const char *function, + struct hso_device *hso_dev) { char *explanation; @@ -694,10 +697,20 @@ static void log_usb_status(int status, const char *function) case -EMSGSIZE: explanation = "internal error"; break; + case -EILSEQ: + case -EPROTO: + case -ETIME: + case -ETIMEDOUT: + explanation = "protocol error"; + if (hso_dev) + schedule_work(&hso_dev->reset_device); + break; default: explanation = "unknown status"; break; } + + /* log a meaningful explanation of an USB status */ D1("%s: received USB status - %s (%d)", function, explanation, status); } @@ -771,7 +784,7 @@ static void write_bulk_callback(struct urb *urb) /* log status, but don't act on it, we don't need to resubmit anything * anyhow */ if (status) - log_usb_status(status, __func__); + handle_usb_error(status, __func__, odev->parent); hso_put_activity(odev->parent); @@ -1007,7 +1020,7 @@ static void read_bulk_callback(struct urb *urb) /* is al ok? (Filip: Who's Al ?) */ if (status) { - log_usb_status(status, __func__); + handle_usb_error(status, __func__, odev->parent); return; } @@ -1217,7 +1230,7 @@ static void hso_std_serial_read_bulk_callback(struct urb *urb) D1("serial == NULL"); return; } else if (status) { - log_usb_status(status, __func__); + handle_usb_error(status, __func__, serial->parent); return; } @@ -1523,7 +1536,7 @@ static void tiocmget_intr_callback(struct urb *urb) if (!serial) return; if (status) { - log_usb_status(status, __func__); + handle_usb_error(status, __func__, serial->parent); return; } tiocmget = serial->tiocmget; @@ -1898,7 +1911,7 @@ static void intr_callback(struct urb *urb) /* status check */ if (status) { - log_usb_status(status, __func__); + handle_usb_error(status, __func__, NULL); return; } D4("\n--- Got intr callback 0x%02X ---", status); @@ -1968,7 +1981,7 @@ static void hso_std_serial_write_bulk_callback(struct urb *urb) tty = tty_kref_get(serial->tty); spin_unlock(&serial->serial_lock); if (status) { - log_usb_status(status, __func__); + handle_usb_error(status, __func__, serial->parent); tty_kref_put(tty); return; } @@ -2024,7 +2037,7 @@ static void ctrl_callback(struct urb *urb) tty = tty_kref_get(serial->tty); spin_unlock(&serial->serial_lock); if (status) { - log_usb_status(status, __func__); + handle_usb_error(status, __func__, serial->parent); tty_kref_put(tty); return; } @@ -2401,6 +2414,7 @@ static struct hso_device *hso_create_device(struct usb_interface *intf, INIT_WORK(&hso_dev->async_get_intf, async_get_intf); INIT_WORK(&hso_dev->async_put_intf, async_put_intf); + INIT_WORK(&hso_dev->reset_device, reset_device); return hso_dev; } @@ -3143,6 +3157,26 @@ out: return result; } +static void reset_device(struct work_struct *data) +{ + struct hso_device *hso_dev = + container_of(data, struct hso_device, reset_device); + struct usb_device *usb = hso_dev->usb; + int result; + + if (hso_dev->usb_gone) { + D1("No reset during disconnect\n"); + } else { + result = usb_lock_device_for_reset(usb, hso_dev->interface); + if (result < 0) + D1("unable to lock device for reset: %d\n", result); + else { + usb_reset_device(usb); + usb_unlock_device(usb); + } + } +} + static void hso_serial_ref_free(struct kref *ref) { struct hso_device *hso_dev = container_of(ref, struct hso_device, ref); From 0e0367e980b55629917f3dd5f5f0ccbf3d0dab62 Mon Sep 17 00:00:00 2001 From: Jan Dumon Date: Tue, 5 Jan 2010 04:52:42 +0000 Subject: [PATCH 0468/1626] hso: Fix for 5 sec timeouts with v2.x firmware Don't send flow control settings to any port other than the modem port. Older firmware ignored this request but did sent a reply. Newer firmware just ignores it without reply and causes a 5 second timeout every time a port (except for the modem port) is opened or if tiocm settings are changed. Signed-off-by: Jan Dumon Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 7482d0d5e278..67eb8390cf07 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1723,6 +1723,10 @@ static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file, D1("no tty structures"); return -EINVAL; } + + if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM) + return -EINVAL; + if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber; spin_lock_irqsave(&serial->serial_lock, flags); From 8a5c9c4932ad1fbe9daa501e89a7357a2804e3fa Mon Sep 17 00:00:00 2001 From: Jan Dumon Date: Tue, 5 Jan 2010 04:53:00 +0000 Subject: [PATCH 0469/1626] hso: fixed missing newlines Fixed missing newlines in calls to dev_warn & dev_err. Signed-off-by: Jan Dumon Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 67eb8390cf07..6895f1531238 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -828,7 +828,7 @@ static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb, result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC); if (result) { dev_warn(&odev->parent->interface->dev, - "failed mux_bulk_tx_urb %d", result); + "failed mux_bulk_tx_urb %d\n", result); net->stats.tx_errors++; netif_start_queue(net); } else { @@ -1076,7 +1076,7 @@ static void read_bulk_callback(struct urb *urb) result = usb_submit_urb(urb, GFP_ATOMIC); if (result) dev_warn(&odev->parent->interface->dev, - "%s failed submit mux_bulk_rx_urb %d", __func__, + "%s failed submit mux_bulk_rx_urb %d\n", __func__, result); } @@ -1865,7 +1865,7 @@ static int mux_device_request(struct hso_serial *serial, u8 type, u16 port, result = usb_submit_urb(ctrl_urb, GFP_ATOMIC); if (result) { dev_err(&ctrl_urb->dev->dev, - "%s failed submit ctrl_urb %d type %d", __func__, + "%s failed submit ctrl_urb %d type %d\n", __func__, result, type); return result; } @@ -2385,12 +2385,12 @@ static int hso_serial_common_create(struct hso_serial *serial, int num_urbs, serial->tx_data_length = tx_size; serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL); if (!serial->tx_data) { - dev_err(dev, "%s - Out of memory", __func__); + dev_err(dev, "%s - Out of memory\n", __func__); goto exit; } serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL); if (!serial->tx_buffer) { - dev_err(dev, "%s - Out of memory", __func__); + dev_err(dev, "%s - Out of memory\n", __func__); goto exit; } @@ -2859,14 +2859,14 @@ struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface) mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL); if (!mux->shared_intr_urb) { - dev_err(&interface->dev, "Could not allocate intr urb?"); + dev_err(&interface->dev, "Could not allocate intr urb?\n"); goto exit; } mux->shared_intr_buf = kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize), GFP_KERNEL); if (!mux->shared_intr_buf) { - dev_err(&interface->dev, "Could not allocate intr buf?"); + dev_err(&interface->dev, "Could not allocate intr buf?\n"); goto exit; } @@ -3287,7 +3287,7 @@ static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int, result = usb_submit_urb(shared_int->shared_intr_urb, gfp); if (result) - dev_warn(&usb->dev, "%s failed mux_intr_urb %d", __func__, + dev_warn(&usb->dev, "%s failed mux_intr_urb %d\n", __func__, result); return result; From 569b7892fe09dd6502bdadb7cf5e7acce907c1a1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 7 Jan 2010 00:53:05 -0800 Subject: [PATCH 0470/1626] cs89x0: Always report failure to request interrupt A failure on request_irq() is always fatal but unlike other fatal errors it's only reported to the user if net_debug is set. Make the diagnostic unconditional and raise the priority so that errors are more obvious to the user. Signed-off-by: Mark Brown Signed-off-by: David S. Miller --- drivers/net/cs89x0.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index af9321617ce4..0e79cef95c0a 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -1325,8 +1325,7 @@ net_open(struct net_device *dev) write_irq(dev, lp->chip_type, dev->irq); ret = request_irq(dev->irq, net_interrupt, 0, dev->name, dev); if (ret) { - if (net_debug) - printk(KERN_DEBUG "cs89x0: request_irq(%d) failed\n", dev->irq); + printk(KERN_ERR "cs89x0: request_irq(%d) failed\n", dev->irq); goto bad_out; } } From c91aa55e7e65be11d68dffb66be5f7a44506fb54 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Wed, 6 Jan 2010 13:05:46 +0000 Subject: [PATCH 0471/1626] pcmcia: ncmlan_cs: remove odd bracket Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller --- drivers/net/pcmcia/nmclan_cs.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 8a5ae3b182ed..12e3233868e9 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -1402,7 +1402,6 @@ static void BuildLAF(int *ladrf, int *adr) for (i = 0; i < 8; i++) printk(KERN_CONT " %02X", ladrf[i]); printk(KERN_CONT "\n"); - } #endif } /* BuildLAF */ From 2467ab9590092ffdf837e9283e84dedd04c93ab3 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 6 Jan 2010 06:54:16 +0000 Subject: [PATCH 0472/1626] NET: atlx, fix memory leak Stanse found a memory leak in atl2_get_eeprom. eeprom_buff is not freed/assigned on all paths. Fix that. Signed-off-by: Jiri Slaby Cc: Jay Cliburn Cc: Chris Snook Cc: Jie Yang Cc: atl1-devel@lists.sourceforge.net Cc: "David S. Miller" Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/atlx/atl2.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c index c0451d75cdcf..ec52529394ad 100644 --- a/drivers/net/atlx/atl2.c +++ b/drivers/net/atlx/atl2.c @@ -1959,12 +1959,15 @@ static int atl2_get_eeprom(struct net_device *netdev, return -ENOMEM; for (i = first_dword; i < last_dword; i++) { - if (!atl2_read_eeprom(hw, i*4, &(eeprom_buff[i-first_dword]))) - return -EIO; + if (!atl2_read_eeprom(hw, i*4, &(eeprom_buff[i-first_dword]))) { + ret_val = -EIO; + goto free; + } } memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3), eeprom->len); +free: kfree(eeprom_buff); return ret_val; From 530e557ab268de154609f3cce2f2390e7b195af3 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Tue, 5 Jan 2010 09:15:32 +0000 Subject: [PATCH 0473/1626] mv643xx_eth: don't include cache padding in rx desc buffer size If NET_SKB_PAD is not a multiple of the cache line size, mv643xx_eth allocates a couple of extra bytes at the start of each receive buffer to make the data payload end up on a cache line boundary. These extra bytes are skb_reserve()'d before DMA mapping, so they should not be included in the DMA map byte count (as the mapping is done starting at skb->data), nor should they be included in the receive descriptor buffer size field, or the hardware can end up DMAing beyond the end of the buffer, which can happen if someone sends us a larger-than-MTU sized packet. This problem was introduced in commit 7fd96ce47ff ("mv643xx_eth: rework receive skb cache alignment", May 6 2009), but hasn't appeared to be problematic so far, probably as the main users of mv643xx_eth all have NET_SKB_PAD == L1_CACHE_BYTES. Signed-off-by: Saeed Bishara Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/mv643xx_eth.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 1405a170bb43..af67af55efe7 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -656,6 +656,7 @@ static int rxq_refill(struct rx_queue *rxq, int budget) struct sk_buff *skb; int rx; struct rx_desc *rx_desc; + int size; skb = __skb_dequeue(&mp->rx_recycle); if (skb == NULL) @@ -678,10 +679,11 @@ static int rxq_refill(struct rx_queue *rxq, int budget) rx_desc = rxq->rx_desc_area + rx; + size = skb->end - skb->data; rx_desc->buf_ptr = dma_map_single(mp->dev->dev.parent, - skb->data, mp->skb_size, + skb->data, size, DMA_FROM_DEVICE); - rx_desc->buf_size = mp->skb_size; + rx_desc->buf_size = size; rxq->rx_skb[rx] = skb; wmb(); rx_desc->cmd_sts = BUFFER_OWNED_BY_DMA | RX_ENABLE_INTERRUPT; From e4e6efd2df4b5754bd519b516207eb723d1f17df Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 7 Jan 2010 01:52:39 -0800 Subject: [PATCH 0474/1626] Input: psmouse - fix Synaptics detection when protocol is disabled For configurations where Synaptics hardware is present but the Synaptics extensions support is not compiled in, the mouse is reprobed and a new device is allocated on every suspend/resume. During probe, psmouse_switch_protocol() calls psmouse_extensions() with set_properties=1. This calls the dummy synaptics_init() which returns an error code, instructing us not to use the synaptics extensions. During resume, psmouse_reconnect() calls psmouse_extensions() with set_properties=0, in which case call to synaptics_init() is bypassed and PSMOUSE_SYNAPTICS is returned. Since the result is different from previous attempt psmouse_reconnect() fails and full re-probe happens. Fix this by tweaking the set_properties=0 codepath in psmouse_extensions() to be more careful about offering PSMOUSE_SYNAPTICS extensions. Signed-off-by: Daniel Drake Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/psmouse-base.c | 9 ++++++++- drivers/input/mouse/synaptics.c | 10 ++++++++++ drivers/input/mouse/synaptics.h | 1 + 3 files changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index d59e18b24ede..cabf4e1caacc 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -627,8 +627,15 @@ static int psmouse_extensions(struct psmouse *psmouse, synaptics_hardware = true; if (max_proto > PSMOUSE_IMEX) { - if (!set_properties || synaptics_init(psmouse) == 0) +/* + * Try activating protocol, but check if support is enabled first, since + * we try detecting Synaptics even when protocol is disabled. + */ + if (synaptics_supported() && + (!set_properties || synaptics_init(psmouse) == 0)) { return PSMOUSE_SYNAPTICS; + } + /* * Some Synaptics touchpads can emulate extended protocols (like IMPS/2). * Unfortunately Logitech/Genius probes confuse some firmware versions so diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 05689e732191..d3f5243fa093 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -743,6 +743,11 @@ int synaptics_init(struct psmouse *psmouse) return -1; } +bool synaptics_supported(void) +{ + return true; +} + #else /* CONFIG_MOUSE_PS2_SYNAPTICS */ void __init synaptics_module_init(void) @@ -754,5 +759,10 @@ int synaptics_init(struct psmouse *psmouse) return -ENOSYS; } +bool synaptics_supported(void) +{ + return false; +} + #endif /* CONFIG_MOUSE_PS2_SYNAPTICS */ diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 838e7f2c9b30..f0f40a331dc8 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -109,5 +109,6 @@ void synaptics_module_init(void); int synaptics_detect(struct psmouse *psmouse, bool set_properties); int synaptics_init(struct psmouse *psmouse); void synaptics_reset(struct psmouse *psmouse); +bool synaptics_supported(void); #endif /* _SYNAPTICS_H */ From 6c28705418de012216161b14a2ff1dda3da3d786 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 7 Jan 2010 12:57:47 +0100 Subject: [PATCH 0475/1626] reiserfs: Don't call reiserfs_get_acl() with the reiserfs lock reiserfs_get_acl is usually not called under the reiserfs lock, as it doesn't need it. But it happens when it is called by reiserfs_acl_chmod(), which creates a dependency inversion against the private xattr inodes mutexes for the given inode. We need to call it without the reiserfs lock, especially since it's unnecessary. Signed-off-by: Frederic Weisbecker Cc: Christian Kujau Cc: Alexander Beregalov Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/xattr_acl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/reiserfs/xattr_acl.c b/fs/reiserfs/xattr_acl.c index 35d6e672a279..f559c9e1efc8 100644 --- a/fs/reiserfs/xattr_acl.c +++ b/fs/reiserfs/xattr_acl.c @@ -452,7 +452,9 @@ int reiserfs_acl_chmod(struct inode *inode) return 0; } + reiserfs_write_unlock(inode->i_sb); acl = reiserfs_get_acl(inode, ACL_TYPE_ACCESS); + reiserfs_write_lock(inode->i_sb); if (!acl) return 0; if (IS_ERR(acl)) From e0baec1b63632f25ea8101b76edaca0accc061ec Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 6 Jan 2010 23:09:50 +0100 Subject: [PATCH 0476/1626] reiserfs: Fix unreachable statement Stanse found an unreachable statement in reiserfs_ioctl. There is a if followed by error assignment and `break' with no braces. Add the braces so that we don't break every time, but only in error case, so that REISERFS_IOC_SETVERSION actually works when it returns no error. Signed-off-by: Jiri Slaby Cc: Reiserfs Cc: Andrew Morton Signed-off-by: Frederic Weisbecker --- fs/reiserfs/ioctl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/reiserfs/ioctl.c b/fs/reiserfs/ioctl.c index ace77451ceb1..f53505de0712 100644 --- a/fs/reiserfs/ioctl.c +++ b/fs/reiserfs/ioctl.c @@ -104,9 +104,10 @@ setflags_out: err = put_user(inode->i_generation, (int __user *)arg); break; case REISERFS_IOC_SETVERSION: - if (!is_owner_or_cap(inode)) + if (!is_owner_or_cap(inode)) { err = -EPERM; break; + } err = mnt_want_write(filp->f_path.mnt); if (err) break; From 36bfc7e2100ab3f9891bb779c36d5e685f253509 Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Tue, 5 Jan 2010 19:33:54 +0100 Subject: [PATCH 0477/1626] drbd: check on CONFIG_LBDAF, not LBD It is called LBDAF since 2.6.31. impact: without this change, on 32bit, DRBD would wrongly claim to only support 2TiB devices. Signed-off-by: Lars Ellenberg Signed-off-by: Philipp Reisner --- drivers/block/drbd/drbd_int.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index c97558763430..79d8e22c4d0d 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -1275,7 +1275,7 @@ struct bm_extent { #if DRBD_MAX_SECTORS_BM < DRBD_MAX_SECTORS_32 #define DRBD_MAX_SECTORS DRBD_MAX_SECTORS_BM #define DRBD_MAX_SECTORS_FLEX DRBD_MAX_SECTORS_BM -#elif !defined(CONFIG_LBD) && BITS_PER_LONG == 32 +#elif !defined(CONFIG_LBDAF) && BITS_PER_LONG == 32 #define DRBD_MAX_SECTORS DRBD_MAX_SECTORS_32 #define DRBD_MAX_SECTORS_FLEX DRBD_MAX_SECTORS_32 #else From 31370f62baa1460b785cee9944bdcaf63d19e567 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 7 Jan 2010 15:55:31 +0100 Subject: [PATCH 0478/1626] reiserfs: Relax reiserfs_xattr_set_handle() while acquiring xattr locks Fix remaining xattr locks acquired in reiserfs_xattr_set_handle() while we are holding the reiserfs lock to avoid lock inversions. Signed-off-by: Frederic Weisbecker Cc: Christian Kujau Cc: Alexander Beregalov Cc: Chris Mason Cc: Ingo Molnar --- fs/reiserfs/xattr.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 4899d789ba67..7fee995c25ab 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -559,8 +559,12 @@ reiserfs_xattr_set_handle(struct reiserfs_transaction_handle *th, .ia_size = buffer_size, .ia_valid = ATTR_SIZE | ATTR_CTIME, }; + + reiserfs_write_unlock(inode->i_sb); mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_XATTR); down_write(&dentry->d_inode->i_alloc_sem); + reiserfs_write_lock(inode->i_sb); + err = reiserfs_setattr(dentry, &newattrs); up_write(&dentry->d_inode->i_alloc_sem); mutex_unlock(&dentry->d_inode->i_mutex); From aaff23a95aea5f000895f50d90e91f1e2f727002 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 7 Jan 2010 18:33:18 +0100 Subject: [PATCH 0479/1626] netfilter: nf_ct_ftp: fix out of bounds read in update_nl_seq() As noticed by Dan Carpenter , update_nl_seq() currently contains an out of bounds read of the seq_aft_nl array when looking for the oldest sequence number position. Fix it to only compare valid positions. Cc: stable@kernel.org Signed-off-by: Patrick McHardy --- net/netfilter/nf_conntrack_ftp.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/net/netfilter/nf_conntrack_ftp.c b/net/netfilter/nf_conntrack_ftp.c index 38ea7ef3ccd2..f0732aa18e4f 100644 --- a/net/netfilter/nf_conntrack_ftp.c +++ b/net/netfilter/nf_conntrack_ftp.c @@ -323,24 +323,24 @@ static void update_nl_seq(struct nf_conn *ct, u32 nl_seq, struct nf_ct_ftp_master *info, int dir, struct sk_buff *skb) { - unsigned int i, oldest = NUM_SEQ_TO_REMEMBER; + unsigned int i, oldest; /* Look for oldest: if we find exact match, we're done. */ for (i = 0; i < info->seq_aft_nl_num[dir]; i++) { if (info->seq_aft_nl[dir][i] == nl_seq) return; - - if (oldest == info->seq_aft_nl_num[dir] || - before(info->seq_aft_nl[dir][i], - info->seq_aft_nl[dir][oldest])) - oldest = i; } if (info->seq_aft_nl_num[dir] < NUM_SEQ_TO_REMEMBER) { info->seq_aft_nl[dir][info->seq_aft_nl_num[dir]++] = nl_seq; - } else if (oldest != NUM_SEQ_TO_REMEMBER && - after(nl_seq, info->seq_aft_nl[dir][oldest])) { - info->seq_aft_nl[dir][oldest] = nl_seq; + } else { + if (before(info->seq_aft_nl[dir][0], info->seq_aft_nl[dir][1])) + oldest = 0; + else + oldest = 1; + + if (after(nl_seq, info->seq_aft_nl[dir][oldest])) + info->seq_aft_nl[dir][oldest] = nl_seq; } } From 8784895ede9a39cfecf76fe26b090a602877f70f Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 7 Jan 2010 17:52:26 +0000 Subject: [PATCH 0480/1626] ARM: add missing recvmmsg syscall number Signed-off-by: Russell King --- arch/arm/include/asm/unistd.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 4e506d09e5f9..cf9cdaa2d4d4 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -391,6 +391,7 @@ #define __NR_pwritev (__NR_SYSCALL_BASE+362) #define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363) #define __NR_perf_event_open (__NR_SYSCALL_BASE+364) +#define __NR_recvmmsg (__NR_SYSCALL_BASE+365) /* * The following SWIs are ARM private. From 6144a85a0e018c19bc4b24f7eb6c1f3f7431813d Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Thu, 7 Jan 2010 11:58:36 -0600 Subject: [PATCH 0481/1626] maccess,probe_kernel: Allow arch specific override probe_kernel_(read|write) Some archs such as blackfin, would like to have an arch specific probe_kernel_read() and probe_kernel_write() implementation which can fall back to the generic implementation if no special operations are needed. CC: Thomas Gleixner CC: Ingo Molnar Signed-off-by: Jason Wessel Signed-off-by: Mike Frysinger --- include/linux/uaccess.h | 4 +++- mm/maccess.c | 11 +++++++++-- 2 files changed, 12 insertions(+), 3 deletions(-) diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h index 6b58367d145e..d512d98dfb7d 100644 --- a/include/linux/uaccess.h +++ b/include/linux/uaccess.h @@ -94,6 +94,7 @@ static inline unsigned long __copy_from_user_nocache(void *to, * happens, handle that and return -EFAULT. */ extern long probe_kernel_read(void *dst, void *src, size_t size); +extern long __probe_kernel_read(void *dst, void *src, size_t size); /* * probe_kernel_write(): safely attempt to write to a location @@ -104,6 +105,7 @@ extern long probe_kernel_read(void *dst, void *src, size_t size); * Safely write to address @dst from the buffer at @src. If a kernel fault * happens, handle that and return -EFAULT. */ -extern long probe_kernel_write(void *dst, void *src, size_t size); +extern long notrace probe_kernel_write(void *dst, void *src, size_t size); +extern long notrace __probe_kernel_write(void *dst, void *src, size_t size); #endif /* __LINUX_UACCESS_H__ */ diff --git a/mm/maccess.c b/mm/maccess.c index 9073695ff25f..4e348dbaecd7 100644 --- a/mm/maccess.c +++ b/mm/maccess.c @@ -14,7 +14,11 @@ * Safely read from address @src to the buffer at @dst. If a kernel fault * happens, handle that and return -EFAULT. */ -long probe_kernel_read(void *dst, void *src, size_t size) + +long __weak probe_kernel_read(void *dst, void *src, size_t size) + __attribute__((alias("__probe_kernel_read"))); + +long __probe_kernel_read(void *dst, void *src, size_t size) { long ret; mm_segment_t old_fs = get_fs(); @@ -39,7 +43,10 @@ EXPORT_SYMBOL_GPL(probe_kernel_read); * Safely write to address @dst from the buffer at @src. If a kernel fault * happens, handle that and return -EFAULT. */ -long notrace __weak probe_kernel_write(void *dst, void *src, size_t size) +long __weak probe_kernel_write(void *dst, void *src, size_t size) + __attribute__((alias("__probe_kernel_write"))); + +long __probe_kernel_write(void *dst, void *src, size_t size) { long ret; mm_segment_t old_fs = get_fs(); From 0fde663708c981189e4e62f3be51e02b1ad4eead Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Thu, 7 Jan 2010 11:58:36 -0600 Subject: [PATCH 0482/1626] blackfin,kgdb,probe_kernel: Cleanup probe_kernel_read/write Blackfin needs it own arch specific probe_kernel_read() and probe_kernel_write(). This was moved out of the kgdb code and into the arch/blackfin/maccess.c, because it is a generic kernel api. The arch specific kgdb.c for blackfin was cleaned of all functions which exist in the kgdb core that do the same thing after resolving the probe_kernel_read() and probe_kernel_write(). This also eliminated the need for most of the #include's. CC: Sonic Zhang Signed-off-by: Jason Wessel Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/kgdb.c | 205 ------------------------------------ arch/blackfin/mm/Makefile | 2 +- arch/blackfin/mm/maccess.c | 97 +++++++++++++++++ 3 files changed, 98 insertions(+), 206 deletions(-) create mode 100644 arch/blackfin/mm/maccess.c diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index f1036b6b9293..da03848bfdd6 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -6,23 +6,9 @@ * Licensed under the GPL-2 or later. */ -#include -#include -#include -#include -#include -#include #include /* for linux pt_regs struct */ #include -#include -#include -#include -#include #include -#include -#include -#include -#include void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) { @@ -424,182 +410,6 @@ struct kgdb_arch arch_kgdb_ops = { .correct_hw_break = bfin_correct_hw_break, }; -static int hex(char ch) -{ - if ((ch >= 'a') && (ch <= 'f')) - return ch - 'a' + 10; - if ((ch >= '0') && (ch <= '9')) - return ch - '0'; - if ((ch >= 'A') && (ch <= 'F')) - return ch - 'A' + 10; - return -1; -} - -static int validate_memory_access_address(unsigned long addr, int size) -{ - if (size < 0 || addr == 0) - return -EFAULT; - return bfin_mem_access_type(addr, size); -} - -static int bfin_probe_kernel_read(char *dst, char *src, int size) -{ - unsigned long lsrc = (unsigned long)src; - int mem_type; - - mem_type = validate_memory_access_address(lsrc, size); - if (mem_type < 0) - return mem_type; - - if (lsrc >= SYSMMR_BASE) { - if (size == 2 && lsrc % 2 == 0) { - u16 mmr = bfin_read16(src); - memcpy(dst, &mmr, sizeof(mmr)); - return 0; - } else if (size == 4 && lsrc % 4 == 0) { - u32 mmr = bfin_read32(src); - memcpy(dst, &mmr, sizeof(mmr)); - return 0; - } - } else { - switch (mem_type) { - case BFIN_MEM_ACCESS_CORE: - case BFIN_MEM_ACCESS_CORE_ONLY: - return probe_kernel_read(dst, src, size); - /* XXX: should support IDMA here with SMP */ - case BFIN_MEM_ACCESS_DMA: - if (dma_memcpy(dst, src, size)) - return 0; - break; - case BFIN_MEM_ACCESS_ITEST: - if (isram_memcpy(dst, src, size)) - return 0; - break; - } - } - - return -EFAULT; -} - -static int bfin_probe_kernel_write(char *dst, char *src, int size) -{ - unsigned long ldst = (unsigned long)dst; - int mem_type; - - mem_type = validate_memory_access_address(ldst, size); - if (mem_type < 0) - return mem_type; - - if (ldst >= SYSMMR_BASE) { - if (size == 2 && ldst % 2 == 0) { - u16 mmr; - memcpy(&mmr, src, sizeof(mmr)); - bfin_write16(dst, mmr); - return 0; - } else if (size == 4 && ldst % 4 == 0) { - u32 mmr; - memcpy(&mmr, src, sizeof(mmr)); - bfin_write32(dst, mmr); - return 0; - } - } else { - switch (mem_type) { - case BFIN_MEM_ACCESS_CORE: - case BFIN_MEM_ACCESS_CORE_ONLY: - return probe_kernel_write(dst, src, size); - /* XXX: should support IDMA here with SMP */ - case BFIN_MEM_ACCESS_DMA: - if (dma_memcpy(dst, src, size)) - return 0; - break; - case BFIN_MEM_ACCESS_ITEST: - if (isram_memcpy(dst, src, size)) - return 0; - break; - } - } - - return -EFAULT; -} - -/* - * Convert the memory pointed to by mem into hex, placing result in buf. - * Return a pointer to the last char put in buf (null). May return an error. - */ -int kgdb_mem2hex(char *mem, char *buf, int count) -{ - char *tmp; - int err; - - /* - * We use the upper half of buf as an intermediate buffer for the - * raw memory copy. Hex conversion will work against this one. - */ - tmp = buf + count; - - err = bfin_probe_kernel_read(tmp, mem, count); - if (!err) { - while (count > 0) { - buf = pack_hex_byte(buf, *tmp); - tmp++; - count--; - } - - *buf = 0; - } - - return err; -} - -/* - * Copy the binary array pointed to by buf into mem. Fix $, #, and - * 0x7d escaped with 0x7d. Return a pointer to the character after - * the last byte written. - */ -int kgdb_ebin2mem(char *buf, char *mem, int count) -{ - char *tmp_old, *tmp_new; - int size; - - tmp_old = tmp_new = buf; - - for (size = 0; size < count; ++size) { - if (*tmp_old == 0x7d) - *tmp_new = *(++tmp_old) ^ 0x20; - else - *tmp_new = *tmp_old; - tmp_new++; - tmp_old++; - } - - return bfin_probe_kernel_write(mem, buf, count); -} - -/* - * Convert the hex array pointed to by buf into binary to be placed in mem. - * Return a pointer to the character AFTER the last byte written. - * May return an error. - */ -int kgdb_hex2mem(char *buf, char *mem, int count) -{ - char *tmp_raw, *tmp_hex; - - /* - * We use the upper half of buf as an intermediate buffer for the - * raw memory that is converted from hex. - */ - tmp_raw = buf + count * 2; - - tmp_hex = tmp_raw - 1; - while (tmp_hex >= buf) { - tmp_raw--; - *tmp_raw = hex(*tmp_hex--); - *tmp_raw |= hex(*tmp_hex--) << 4; - } - - return bfin_probe_kernel_write(mem, tmp_raw, count); -} - #define IN_MEM(addr, size, l1_addr, l1_size) \ ({ \ unsigned long __addr = (unsigned long)(addr); \ @@ -629,21 +439,6 @@ int kgdb_validate_break_address(unsigned long addr) return -EFAULT; } -int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) -{ - int err = bfin_probe_kernel_read(saved_instr, (char *)addr, - BREAK_INSTR_SIZE); - if (err) - return err; - return bfin_probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr, - BREAK_INSTR_SIZE); -} - -int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle) -{ - return bfin_probe_kernel_write((char *)addr, bundle, BREAK_INSTR_SIZE); -} - int kgdb_arch_init(void) { kgdb_single_step = 0; diff --git a/arch/blackfin/mm/Makefile b/arch/blackfin/mm/Makefile index d489f894f4b1..4c011b1f661f 100644 --- a/arch/blackfin/mm/Makefile +++ b/arch/blackfin/mm/Makefile @@ -2,4 +2,4 @@ # arch/blackfin/mm/Makefile # -obj-y := sram-alloc.o isram-driver.o init.o +obj-y := sram-alloc.o isram-driver.o init.o maccess.o diff --git a/arch/blackfin/mm/maccess.c b/arch/blackfin/mm/maccess.c new file mode 100644 index 000000000000..b71cebc1f8a3 --- /dev/null +++ b/arch/blackfin/mm/maccess.c @@ -0,0 +1,97 @@ +/* + * safe read and write memory routines callable while atomic + * + * Copyright 2005-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include + +static int validate_memory_access_address(unsigned long addr, int size) +{ + if (size < 0 || addr == 0) + return -EFAULT; + return bfin_mem_access_type(addr, size); +} + +long probe_kernel_read(void *dst, void *src, size_t size) +{ + unsigned long lsrc = (unsigned long)src; + int mem_type; + + mem_type = validate_memory_access_address(lsrc, size); + if (mem_type < 0) + return mem_type; + + if (lsrc >= SYSMMR_BASE) { + if (size == 2 && lsrc % 2 == 0) { + u16 mmr = bfin_read16(src); + memcpy(dst, &mmr, sizeof(mmr)); + return 0; + } else if (size == 4 && lsrc % 4 == 0) { + u32 mmr = bfin_read32(src); + memcpy(dst, &mmr, sizeof(mmr)); + return 0; + } + } else { + switch (mem_type) { + case BFIN_MEM_ACCESS_CORE: + case BFIN_MEM_ACCESS_CORE_ONLY: + return __probe_kernel_read(dst, src, size); + /* XXX: should support IDMA here with SMP */ + case BFIN_MEM_ACCESS_DMA: + if (dma_memcpy(dst, src, size)) + return 0; + break; + case BFIN_MEM_ACCESS_ITEST: + if (isram_memcpy(dst, src, size)) + return 0; + break; + } + } + + return -EFAULT; +} + +long probe_kernel_write(void *dst, void *src, size_t size) +{ + unsigned long ldst = (unsigned long)dst; + int mem_type; + + mem_type = validate_memory_access_address(ldst, size); + if (mem_type < 0) + return mem_type; + + if (ldst >= SYSMMR_BASE) { + if (size == 2 && ldst % 2 == 0) { + u16 mmr; + memcpy(&mmr, src, sizeof(mmr)); + bfin_write16(dst, mmr); + return 0; + } else if (size == 4 && ldst % 4 == 0) { + u32 mmr; + memcpy(&mmr, src, sizeof(mmr)); + bfin_write32(dst, mmr); + return 0; + } + } else { + switch (mem_type) { + case BFIN_MEM_ACCESS_CORE: + case BFIN_MEM_ACCESS_CORE_ONLY: + return __probe_kernel_write(dst, src, size); + /* XXX: should support IDMA here with SMP */ + case BFIN_MEM_ACCESS_DMA: + if (dma_memcpy(dst, src, size)) + return 0; + break; + case BFIN_MEM_ACCESS_ITEST: + if (isram_memcpy(dst, src, size)) + return 0; + break; + } + } + + return -EFAULT; +} From 7fe1a91281de095e4cc43868cc14ca4937154a0c Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 7 Jan 2010 11:58:37 -0600 Subject: [PATCH 0483/1626] blackfin,kgdb: Do not put PC in gdb_regs into retx. In blackfin, kgdb is running in delayed exception IRQ5 other than in exception IRQ3 directly. Register reti other than retx in pt_regs is the kgdb return address. So, don't put PC in gdb_regs into retx. CC: Mike Frysinger Signed-off-by: Sonic Zhang Signed-off-by: Jason Wessel --- arch/blackfin/kernel/kgdb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index da03848bfdd6..34c7c3ed2c9c 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -133,7 +133,7 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) regs->lb1 = gdb_regs[BFIN_LB1]; regs->usp = gdb_regs[BFIN_USP]; regs->syscfg = gdb_regs[BFIN_SYSCFG]; - regs->retx = gdb_regs[BFIN_PC]; + regs->retx = gdb_regs[BFIN_RETX]; regs->retn = gdb_regs[BFIN_RETN]; regs->rete = gdb_regs[BFIN_RETE]; regs->pc = gdb_regs[BFIN_PC]; From b11e1eca7ed9c0b5dab21a62c11acc711d9bdda0 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 7 Jan 2010 11:58:37 -0600 Subject: [PATCH 0484/1626] kgdb: Fix kernel-doc format error in kgdb.h linux-next-20081022//include/linux/kgdb.h:308): duplicate section name 'Description' and fix typos in that file's kernel-doc comments. Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Jason Wessel --- include/linux/kgdb.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h index 6adcc297e354..19ec41a183f5 100644 --- a/include/linux/kgdb.h +++ b/include/linux/kgdb.h @@ -29,8 +29,7 @@ struct pt_regs; * * On some architectures it is required to skip a breakpoint * exception when it occurs after a breakpoint has been removed. - * This can be implemented in the architecture specific portion of - * for kgdb. + * This can be implemented in the architecture specific portion of kgdb. */ extern int kgdb_skipexception(int exception, struct pt_regs *regs); @@ -65,7 +64,7 @@ struct uart_port; /** * kgdb_breakpoint - compiled in breakpoint * - * This will be impelmented a static inline per architecture. This + * This will be implemented as a static inline per architecture. This * function is called by the kgdb core to execute an architecture * specific trap to cause kgdb to enter the exception processing. * @@ -190,7 +189,7 @@ kgdb_arch_handle_exception(int vector, int signo, int err_code, * @flags: Current IRQ state * * On SMP systems, we need to get the attention of the other CPUs - * and get them be in a known state. This should do what is needed + * and get them into a known state. This should do what is needed * to get the other CPUs to call kgdb_wait(). Note that on some arches, * the NMI approach is not used for rounding up all the CPUs. For example, * in case of MIPS, smp_call_function() is used to roundup CPUs. In From 8fcc501831aa5b37a4a5a8cd9dc965be3cacc599 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 28 Dec 2009 13:15:20 +0800 Subject: [PATCH 0485/1626] drm/i915: disable TV hotplug status check As we removed TV hotplug, don't check its status ever. Reviewed-by: Adam Jackson Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_tv.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 1d5b9b7b033f..552ec110b741 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1840,8 +1840,6 @@ intel_tv_init(struct drm_device *dev) drm_connector_attach_property(connector, dev->mode_config.tv_bottom_margin_property, tv_priv->margin[TV_MARGIN_BOTTOM]); - - dev_priv->hotplug_supported_mask |= TV_HOTPLUG_INT_STATUS; out: drm_sysfs_connector_add(connector); } From 40f33a92100f4d9b6e85ad642100cfe42d7ff57d Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 6 Jan 2010 13:30:36 +0800 Subject: [PATCH 0486/1626] drm/i915: Add HP nx9020/SamsungSX20S to ACPI LID quirk list The HP comaq nx9020/Samsung SX20S laptop always report that the LID status is closed and we can't use it reliabily for LVDS detection. So add the two boxes into the quirk list. http://bugzilla.kernel.org/show_bug.cgi?id=14957 http://bugzilla.kernel.org/show_bug.cgi?id=14554 Signed-off-by: Zhao Yakui Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_lvds.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index f4b4aa242df1..5041590dfdc6 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -601,6 +601,20 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder, /* Some lid devices report incorrect lid status, assume they're connected */ static const struct dmi_system_id bad_lid_status[] = { + { + .ident = "Compaq nx9020", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_BOARD_NAME, "3084"), + }, + }, + { + .ident = "Samsung SX20S", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BOARD_NAME, "SX20S"), + }, + }, { .ident = "Aspire One", .matches = { From ddc9003c357d1ce10be6ec91bdb8df8ea836087d Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 6 Jan 2010 22:05:56 +0800 Subject: [PATCH 0487/1626] drm/i915: Use find_pll function to calculate DPLL setting for LVDS downclock For any given clock we can use the find_pll to get the corresponding DPLL setting. It is unnecessary to use the find_reduce_pll callback function to calculate the DPLL parameter for LVDS downclock in order to get the same divider factor(P) for the normal and downclock. In theory when the LVDS downclock is supported by LVDS panel, we should get the same DPLL divider factor(P) for the normal clock and reduced downclock. If we get the diferent divider factor(P) for normal clock and reduced downclock, it means that the found downclock is incorrect and should be discarded. So we should use find_pll callback to calculate the DPLL parameter for the LVDS reduced downclock as for the normal clock. Then we can do the cleanup about find_reduced_pll. Signed-off-by: Zhao Yakui cc: Jesse Barnes cc: Matthew Garrett Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 61 +--------------------------- 1 file changed, 2 insertions(+), 59 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 002612fae717..0cf44d6e9deb 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -70,8 +70,6 @@ struct intel_limit { intel_p2_t p2; bool (* find_pll)(const intel_limit_t *, struct drm_crtc *, int, int, intel_clock_t *); - bool (* find_reduced_pll)(const intel_limit_t *, struct drm_crtc *, - int, int, intel_clock_t *); }; #define I8XX_DOT_MIN 25000 @@ -274,9 +272,6 @@ static bool intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); static bool -intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *best_clock); -static bool intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); @@ -299,7 +294,6 @@ static const intel_limit_t intel_limits_i8xx_dvo = { .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST }, .find_pll = intel_find_best_PLL, - .find_reduced_pll = intel_find_best_reduced_PLL, }; static const intel_limit_t intel_limits_i8xx_lvds = { @@ -314,7 +308,6 @@ static const intel_limit_t intel_limits_i8xx_lvds = { .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST }, .find_pll = intel_find_best_PLL, - .find_reduced_pll = intel_find_best_reduced_PLL, }; static const intel_limit_t intel_limits_i9xx_sdvo = { @@ -329,7 +322,6 @@ static const intel_limit_t intel_limits_i9xx_sdvo = { .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, .find_pll = intel_find_best_PLL, - .find_reduced_pll = intel_find_best_reduced_PLL, }; static const intel_limit_t intel_limits_i9xx_lvds = { @@ -347,7 +339,6 @@ static const intel_limit_t intel_limits_i9xx_lvds = { .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST }, .find_pll = intel_find_best_PLL, - .find_reduced_pll = intel_find_best_reduced_PLL, }; /* below parameter and function is for G4X Chipset Family*/ @@ -365,7 +356,6 @@ static const intel_limit_t intel_limits_g4x_sdvo = { .p2_fast = G4X_P2_SDVO_FAST }, .find_pll = intel_g4x_find_best_PLL, - .find_reduced_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_hdmi = { @@ -382,7 +372,6 @@ static const intel_limit_t intel_limits_g4x_hdmi = { .p2_fast = G4X_P2_HDMI_DAC_FAST }, .find_pll = intel_g4x_find_best_PLL, - .find_reduced_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_single_channel_lvds = { @@ -407,7 +396,6 @@ static const intel_limit_t intel_limits_g4x_single_channel_lvds = { .p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST }, .find_pll = intel_g4x_find_best_PLL, - .find_reduced_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { @@ -432,7 +420,6 @@ static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { .p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST }, .find_pll = intel_g4x_find_best_PLL, - .find_reduced_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_display_port = { @@ -470,7 +457,6 @@ static const intel_limit_t intel_limits_pineview_sdvo = { .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, .find_pll = intel_find_best_PLL, - .find_reduced_pll = intel_find_best_reduced_PLL, }; static const intel_limit_t intel_limits_pineview_lvds = { @@ -486,7 +472,6 @@ static const intel_limit_t intel_limits_pineview_lvds = { .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW }, .find_pll = intel_find_best_PLL, - .find_reduced_pll = intel_find_best_reduced_PLL, }; static const intel_limit_t intel_limits_ironlake_sdvo = { @@ -768,46 +753,6 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, return (err != target); } - -static bool -intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *best_clock) - -{ - struct drm_device *dev = crtc->dev; - intel_clock_t clock; - int err = target; - bool found = false; - - memcpy(&clock, best_clock, sizeof(intel_clock_t)); - - for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { - for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; clock.m2++) { - /* m1 is always 0 in Pineview */ - if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev)) - break; - for (clock.n = limit->n.min; clock.n <= limit->n.max; - clock.n++) { - int this_err; - - intel_clock(dev, refclk, &clock); - - if (!intel_PLL_is_valid(crtc, &clock)) - continue; - - this_err = abs(clock.dot - target); - if (this_err < err) { - *best_clock = clock; - err = this_err; - found = true; - } - } - } - } - - return found; -} - static bool intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock) @@ -2910,10 +2855,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, return -EINVAL; } - if (is_lvds && limit->find_reduced_pll && - dev_priv->lvds_downclock_avail) { - memcpy(&reduced_clock, &clock, sizeof(intel_clock_t)); - has_reduced_clock = limit->find_reduced_pll(limit, crtc, + if (is_lvds && dev_priv->lvds_downclock_avail) { + has_reduced_clock = limit->find_pll(limit, crtc, dev_priv->lvds_downclock, refclk, &reduced_clock); From a59e385eacd920222756a23c113444fe3063cf81 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 6 Jan 2010 22:05:57 +0800 Subject: [PATCH 0488/1626] drm/i915: Fix Ironlake M/N/P ranges to match the spec Without this fix, some modes couldn't find appropriate clocks. Signed-off-by: Zhao Yakui Signed-off-by: Eric Anholt Tested-by: Matthew Garrett --- drivers/gpu/drm/i915/intel_display.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 0cf44d6e9deb..42e8c031c2ca 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -241,11 +241,11 @@ struct intel_limit { #define IRONLAKE_VCO_MIN 1760000 #define IRONLAKE_VCO_MAX 3510000 #define IRONLAKE_N_MIN 1 -#define IRONLAKE_N_MAX 5 +#define IRONLAKE_N_MAX 6 #define IRONLAKE_M_MIN 79 -#define IRONLAKE_M_MAX 118 +#define IRONLAKE_M_MAX 127 #define IRONLAKE_M1_MIN 12 -#define IRONLAKE_M1_MAX 23 +#define IRONLAKE_M1_MAX 22 #define IRONLAKE_M2_MIN 5 #define IRONLAKE_M2_MAX 9 #define IRONLAKE_P_SDVO_DAC_MIN 5 From 6c57a332901f851bd092aba7a2b4d8ef4e643829 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 7 Jan 2010 16:10:57 -0800 Subject: [PATCH 0489/1626] [IA64] __per_cpu_idtrs[] is a memory hog __per_cpu_idtrs is statically allocated ... on CONFIG_NR_CPUS=4096 systems it hogs 16MB of memory. This is way too much for a quite probably unused facility (only KVM uses dynamic TR registers). Change to an array of pointers, and allocate entries as needed on a per cpu basis. Change the name too as the __per_cpu_ prefix is confusing (this isn't a classic type object). Signed-off-by: Tony Luck --- arch/ia64/include/asm/tlb.h | 2 +- arch/ia64/kernel/mca.c | 5 ++++- arch/ia64/mm/tlb.c | 32 +++++++++++++++++++------------- 3 files changed, 24 insertions(+), 15 deletions(-) diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index 85d965cb19a0..23cce999eb1c 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -74,7 +74,7 @@ struct ia64_tr_entry { extern int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size); extern void ia64_ptr_entry(u64 target_mask, int slot); -extern struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX]; +extern struct ia64_tr_entry *ia64_idtrs[NR_CPUS]; /* region register macros diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 32f2639e9b0a..378b4833024f 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -1225,9 +1225,12 @@ static void mca_insert_tr(u64 iord) unsigned long psr; int cpu = smp_processor_id(); + if (!ia64_idtrs[cpu]) + return; + psr = ia64_clear_ic(); for (i = IA64_TR_ALLOC_BASE; i < IA64_TR_ALLOC_MAX; i++) { - p = &__per_cpu_idtrs[cpu][iord-1][i]; + p = ia64_idtrs[cpu] + (iord - 1) * IA64_TR_ALLOC_MAX; if (p->pte & 0x1) { old_rr = ia64_get_rr(p->ifa); if (old_rr != p->rr) { diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index ee09d261f2e6..f3de9d7a98b4 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -48,7 +48,7 @@ DEFINE_PER_CPU(u8, ia64_need_tlb_flush); DEFINE_PER_CPU(u8, ia64_tr_num); /*Number of TR slots in current processor*/ DEFINE_PER_CPU(u8, ia64_tr_used); /*Max Slot number used by kernel*/ -struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX]; +struct ia64_tr_entry *ia64_idtrs[NR_CPUS]; /* * Initializes the ia64_ctx.bitmap array based on max_ctx+1. @@ -429,10 +429,16 @@ int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size) struct ia64_tr_entry *p; int cpu = smp_processor_id(); + if (!ia64_idtrs[cpu]) { + ia64_idtrs[cpu] = kmalloc(2 * IA64_TR_ALLOC_MAX * + sizeof (struct ia64_tr_entry), GFP_KERNEL); + if (!ia64_idtrs[cpu]) + return -ENOMEM; + } r = -EINVAL; /*Check overlap with existing TR entries*/ if (target_mask & 0x1) { - p = &__per_cpu_idtrs[cpu][0][0]; + p = ia64_idtrs[cpu]; for (i = IA64_TR_ALLOC_BASE; i <= per_cpu(ia64_tr_used, cpu); i++, p++) { if (p->pte & 0x1) @@ -444,7 +450,7 @@ int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size) } } if (target_mask & 0x2) { - p = &__per_cpu_idtrs[cpu][1][0]; + p = ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX; for (i = IA64_TR_ALLOC_BASE; i <= per_cpu(ia64_tr_used, cpu); i++, p++) { if (p->pte & 0x1) @@ -459,16 +465,16 @@ int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size) for (i = IA64_TR_ALLOC_BASE; i < per_cpu(ia64_tr_num, cpu); i++) { switch (target_mask & 0x3) { case 1: - if (!(__per_cpu_idtrs[cpu][0][i].pte & 0x1)) + if (!((ia64_idtrs[cpu] + i)->pte & 0x1)) goto found; continue; case 2: - if (!(__per_cpu_idtrs[cpu][1][i].pte & 0x1)) + if (!((ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i)->pte & 0x1)) goto found; continue; case 3: - if (!(__per_cpu_idtrs[cpu][0][i].pte & 0x1) && - !(__per_cpu_idtrs[cpu][1][i].pte & 0x1)) + if (!((ia64_idtrs[cpu] + i)->pte & 0x1) && + !((ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i)->pte & 0x1)) goto found; continue; default: @@ -488,7 +494,7 @@ found: if (target_mask & 0x1) { ia64_itr(0x1, i, va, pte, log_size); ia64_srlz_i(); - p = &__per_cpu_idtrs[cpu][0][i]; + p = ia64_idtrs[cpu] + i; p->ifa = va; p->pte = pte; p->itir = log_size << 2; @@ -497,7 +503,7 @@ found: if (target_mask & 0x2) { ia64_itr(0x2, i, va, pte, log_size); ia64_srlz_i(); - p = &__per_cpu_idtrs[cpu][1][i]; + p = ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i; p->ifa = va; p->pte = pte; p->itir = log_size << 2; @@ -528,7 +534,7 @@ void ia64_ptr_entry(u64 target_mask, int slot) return; if (target_mask & 0x1) { - p = &__per_cpu_idtrs[cpu][0][slot]; + p = ia64_idtrs[cpu] + slot; if ((p->pte&0x1) && is_tr_overlap(p, p->ifa, p->itir>>2)) { p->pte = 0; ia64_ptr(0x1, p->ifa, p->itir>>2); @@ -537,7 +543,7 @@ void ia64_ptr_entry(u64 target_mask, int slot) } if (target_mask & 0x2) { - p = &__per_cpu_idtrs[cpu][1][slot]; + p = ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + slot; if ((p->pte & 0x1) && is_tr_overlap(p, p->ifa, p->itir>>2)) { p->pte = 0; ia64_ptr(0x2, p->ifa, p->itir>>2); @@ -546,8 +552,8 @@ void ia64_ptr_entry(u64 target_mask, int slot) } for (i = per_cpu(ia64_tr_used, cpu); i >= IA64_TR_ALLOC_BASE; i--) { - if ((__per_cpu_idtrs[cpu][0][i].pte & 0x1) || - (__per_cpu_idtrs[cpu][1][i].pte & 0x1)) + if (((ia64_idtrs[cpu] + i)->pte & 0x1) || + ((ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i)->pte & 0x1)) break; } per_cpu(ia64_tr_used, cpu) = i; From 6837e895cbfd5ce8a717f112e927d2815f341e54 Mon Sep 17 00:00:00 2001 From: PJ Waskiewicz Date: Wed, 6 Jan 2010 17:50:29 +0000 Subject: [PATCH 0490/1626] ixgbe: Fix compiler warning about variable being used uninitialized tc is still throwing a warning that is could be used uninitialized. This fixes it, and properly formats the device ID checks for the use of this variable. Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 1a2ea621e371..2ad754c864cf 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -262,10 +262,12 @@ static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter, int reg_idx = tx_ring->reg_idx; int dcb_i = adapter->ring_feature[RING_F_DCB].indices; - if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + switch (adapter->hw.mac.type) { + case ixgbe_mac_82598EB: tc = reg_idx >> 2; txoff = IXGBE_TFCS_TXOFF0; - } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + break; + case ixgbe_mac_82599EB: tc = 0; txoff = IXGBE_TFCS_TXOFF; if (dcb_i == 8) { @@ -284,6 +286,9 @@ static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter, tc += (reg_idx - 96) >> 4; } } + break; + default: + tc = 0; } txoff <<= tc; } From 4d907069bc1b745f4abd4745c332d33098e733b8 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 7 Jan 2010 02:41:51 +0000 Subject: [PATCH 0491/1626] dmfe/tulip: Let dmfe handle DM910x except for SPARC on-board chips The Davicom DM9100 and DM9102 chips are used on the motherboards of some SPARC systems (supported by the tulip driver) and also in PCI expansion cards (supported by the dmfe driver). There is no difference in the PCI device ids for the two different configurations, so these drivers both claim the device ids. However, it is possible to distinguish the two configurations by the presence of Open Firmware properties for them, so we do that. Signed-off-by: Ben Hutchings Signed-off-by: Grant Grundler Signed-off-by: David S. Miller --- drivers/net/tulip/Kconfig | 4 ++++ drivers/net/tulip/dmfe.c | 21 +++++++++++++++++++++ drivers/net/tulip/tulip_core.c | 32 +++++++++++++++++++++++++------- 3 files changed, 50 insertions(+), 7 deletions(-) diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig index 1cc8cf4425d1..516713fa0a05 100644 --- a/drivers/net/tulip/Kconfig +++ b/drivers/net/tulip/Kconfig @@ -101,6 +101,10 @@ config TULIP_NAPI_HW_MITIGATION If in doubt, say Y. +config TULIP_DM910X + def_bool y + depends on TULIP && SPARC + config DE4X5 tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA" depends on PCI || EISA diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index ad63621913c3..6f44ebf58910 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -92,6 +92,10 @@ #include #include +#ifdef CONFIG_TULIP_DM910X +#include +#endif + /* Board/System/Debug information/definition ---------------- */ #define PCI_DM9132_ID 0x91321282 /* Davicom DM9132 ID */ @@ -377,6 +381,23 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, if (!printed_version++) printk(version); + /* + * SPARC on-board DM910x chips should be handled by the main + * tulip driver, except for early DM9100s. + */ +#ifdef CONFIG_TULIP_DM910X + if ((ent->driver_data == PCI_DM9100_ID && pdev->revision >= 0x30) || + ent->driver_data == PCI_DM9102_ID) { + struct device_node *dp = pci_device_to_OF_node(pdev); + + if (dp && of_get_property(dp, "local-mac-address", NULL)) { + printk(KERN_INFO DRV_NAME + ": skipping on-board DM910x (use tulip)\n"); + return -ENODEV; + } + } +#endif + /* Init network device */ dev = alloc_etherdev(sizeof(*db)); if (dev == NULL) diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 0fa3140d65bf..595777dcadb1 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -196,9 +196,13 @@ struct tulip_chip_table tulip_tbl[] = { | HAS_NWAY | HAS_PCI_MWI, tulip_timer, tulip_media_task }, /* DM910X */ +#ifdef CONFIG_TULIP_DM910X { "Davicom DM9102/DM9102A", 128, 0x0001ebef, HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, tulip_timer, tulip_media_task }, +#else + { NULL }, +#endif /* RS7112 */ { "Conexant LANfinity", 256, 0x0001ebef, @@ -228,8 +232,10 @@ static struct pci_device_id tulip_pci_tbl[] = { { 0x1259, 0xa120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x11F6, 0x9881, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMPEX9881 }, { 0x8086, 0x0039, PCI_ANY_ID, PCI_ANY_ID, 0, 0, I21145 }, +#ifdef CONFIG_TULIP_DM910X { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X }, { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X }, +#endif { 0x1113, 0x1216, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x1113, 0x1217, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 }, { 0x1113, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, @@ -1299,18 +1305,30 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, } /* - * Early DM9100's need software CRC and the DMFE driver + * DM910x chips should be handled by the dmfe driver, except + * on-board chips on SPARC systems. Also, early DM9100s need + * software CRC which only the dmfe driver supports. */ - if (pdev->vendor == 0x1282 && pdev->device == 0x9100) - { - /* Read Chip revision */ - if (pdev->revision < 0x30) - { - printk(KERN_ERR PFX "skipping early DM9100 with Crc bug (use dmfe)\n"); +#ifdef CONFIG_TULIP_DM910X + if (chip_idx == DM910X) { + struct device_node *dp; + + if (pdev->vendor == 0x1282 && pdev->device == 0x9100 && + pdev->revision < 0x30) { + printk(KERN_INFO PFX + "skipping early DM9100 with Crc bug (use dmfe)\n"); + return -ENODEV; + } + + dp = pci_device_to_OF_node(pdev); + if (!(dp && of_get_property(dp, "local-mac-address", NULL))) { + printk(KERN_INFO PFX + "skipping DM910x expansion card (use dmfe)\n"); return -ENODEV; } } +#endif /* * Looks for early PCI chipsets where people report hangs From 1ca518b64b4b5865b677f292322e893fa89997d4 Mon Sep 17 00:00:00 2001 From: Sriram Date: Thu, 7 Jan 2010 00:22:37 +0000 Subject: [PATCH 0492/1626] TI DaVinci EMAC: Handle emac module clock correctly. In the driver probe function the emac module clock needs to be enabled before calling register_netdev(). As soon as the device is registered the driver get_stats function can be invoked by the core - the module clock must be switched on to be able to read from stats registers. Also explicitly call matching clk_disable for failure conditions in probe function. Signed-off-by: Sriramakrishnan Signed-off-by: David S. Miller --- drivers/net/davinci_emac.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 34e03104c3c1..33c4fe26178c 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2711,6 +2711,8 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) SET_ETHTOOL_OPS(ndev, ðtool_ops); netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT); + clk_enable(emac_clk); + /* register the network device */ SET_NETDEV_DEV(ndev, &pdev->dev); rc = register_netdev(ndev); @@ -2720,7 +2722,6 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) goto netdev_reg_err; } - clk_enable(emac_clk); /* MII/Phy intialisation, mdio bus registration */ emac_mii = mdiobus_alloc(); @@ -2760,6 +2761,7 @@ mdiobus_quit: netdev_reg_err: mdio_alloc_err: + clk_disable(emac_clk); no_irq_res: res = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(res->start, res->end - res->start + 1); From d13fecd0293d55a4bcb8a31078216504192d8ce0 Mon Sep 17 00:00:00 2001 From: Cyril Hrubis Date: Thu, 7 Jan 2010 21:31:04 +0100 Subject: [PATCH 0493/1626] [ARM] pxa: fix strange characters in zaurus gpio .desc Somehow, strange characters made their way zaurus gpio .desc fields. Fix it. Signed-off-by: Pavel Machek Acked-by: Stanislav Brabec Signed-off-by: Eric Miao --- arch/arm/mach-pxa/spitz.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 4b50f144fa48..28352c0b8c34 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -389,13 +389,13 @@ static struct gpio_keys_button spitz_gpio_keys[] = { .type = EV_SW, .code = 0, .gpio = SPITZ_GPIO_SWA, - .desc = "Display Down", + .desc = "Display Down", }, { .type = EV_SW, .code = 1, .gpio = SPITZ_GPIO_SWB, - .desc = "Lid Closed", + .desc = "Lid Closed", }, }; From a5899fcc189e9357873ddf26d5e6e7e6ff84c2f4 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 7 Jan 2010 14:19:47 -0500 Subject: [PATCH 0494/1626] drm/radeon/kms: fix typo in atom connector type handling Also remove the problematic enums that were unused remnants from the ddx. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 10 ++++----- drivers/gpu/drm/radeon/radeon_mode.h | 26 ------------------------ 2 files changed, 5 insertions(+), 31 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index ccba95f83d11..844c513f7244 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -604,13 +604,13 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) else return ATOM_ENCODER_MODE_DVI; break; - case CONNECTOR_DVI_A: - case CONNECTOR_VGA: + case DRM_MODE_CONNECTOR_DVIA: + case DRM_MODE_CONNECTOR_VGA: return ATOM_ENCODER_MODE_CRT; break; - case CONNECTOR_STV: - case CONNECTOR_CTV: - case CONNECTOR_DIN: + case DRM_MODE_CONNECTOR_Composite: + case DRM_MODE_CONNECTOR_SVIDEO: + case DRM_MODE_CONNECTOR_9PinDIN: /* fix me */ return ATOM_ENCODER_MODE_TV; /*return ATOM_ENCODER_MODE_CV;*/ diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 402369db5ba0..91cb041cb40d 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -46,32 +46,6 @@ struct radeon_device; #define to_radeon_encoder(x) container_of(x, struct radeon_encoder, base) #define to_radeon_framebuffer(x) container_of(x, struct radeon_framebuffer, base) -enum radeon_connector_type { - CONNECTOR_NONE, - CONNECTOR_VGA, - CONNECTOR_DVI_I, - CONNECTOR_DVI_D, - CONNECTOR_DVI_A, - CONNECTOR_STV, - CONNECTOR_CTV, - CONNECTOR_LVDS, - CONNECTOR_DIGITAL, - CONNECTOR_SCART, - CONNECTOR_HDMI_TYPE_A, - CONNECTOR_HDMI_TYPE_B, - CONNECTOR_0XC, - CONNECTOR_0XD, - CONNECTOR_DIN, - CONNECTOR_DISPLAY_PORT, - CONNECTOR_UNSUPPORTED -}; - -enum radeon_dvi_type { - DVI_AUTO, - DVI_DIGITAL, - DVI_ANALOG -}; - enum radeon_rmx_type { RMX_OFF, RMX_FULL, From a7bc115fffb69a55cf2c332567ea6908d9026f22 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 7 Jan 2010 11:35:48 -0500 Subject: [PATCH 0495/1626] drm/radeon/kms: whitespace changes to ObjectID.h Makes it easier to keep in sync with ddx and the upstream AMD versions. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/ObjectID.h | 544 +++++++++++++----------------- 1 file changed, 242 insertions(+), 302 deletions(-) diff --git a/drivers/gpu/drm/radeon/ObjectID.h b/drivers/gpu/drm/radeon/ObjectID.h index 6d0183c61d3b..f1f18a48cf69 100644 --- a/drivers/gpu/drm/radeon/ObjectID.h +++ b/drivers/gpu/drm/radeon/ObjectID.h @@ -1,5 +1,5 @@ /* -* Copyright 2006-2007 Advanced Micro Devices, Inc. +* Copyright 2006-2007 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), @@ -41,14 +41,14 @@ /****************************************************/ /* Encoder Object ID Definition */ /****************************************************/ -#define ENCODER_OBJECT_ID_NONE 0x00 +#define ENCODER_OBJECT_ID_NONE 0x00 /* Radeon Class Display Hardware */ #define ENCODER_OBJECT_ID_INTERNAL_LVDS 0x01 #define ENCODER_OBJECT_ID_INTERNAL_TMDS1 0x02 #define ENCODER_OBJECT_ID_INTERNAL_TMDS2 0x03 #define ENCODER_OBJECT_ID_INTERNAL_DAC1 0x04 -#define ENCODER_OBJECT_ID_INTERNAL_DAC2 0x05 /* TV/CV DAC */ +#define ENCODER_OBJECT_ID_INTERNAL_DAC2 0x05 /* TV/CV DAC */ #define ENCODER_OBJECT_ID_INTERNAL_SDVOA 0x06 #define ENCODER_OBJECT_ID_INTERNAL_SDVOB 0x07 @@ -56,11 +56,11 @@ #define ENCODER_OBJECT_ID_SI170B 0x08 #define ENCODER_OBJECT_ID_CH7303 0x09 #define ENCODER_OBJECT_ID_CH7301 0x0A -#define ENCODER_OBJECT_ID_INTERNAL_DVO1 0x0B /* This belongs to Radeon Class Display Hardware */ +#define ENCODER_OBJECT_ID_INTERNAL_DVO1 0x0B /* This belongs to Radeon Class Display Hardware */ #define ENCODER_OBJECT_ID_EXTERNAL_SDVOA 0x0C #define ENCODER_OBJECT_ID_EXTERNAL_SDVOB 0x0D #define ENCODER_OBJECT_ID_TITFP513 0x0E -#define ENCODER_OBJECT_ID_INTERNAL_LVTM1 0x0F /* not used for Radeon */ +#define ENCODER_OBJECT_ID_INTERNAL_LVTM1 0x0F /* not used for Radeon */ #define ENCODER_OBJECT_ID_VT1623 0x10 #define ENCODER_OBJECT_ID_HDMI_SI1930 0x11 #define ENCODER_OBJECT_ID_HDMI_INTERNAL 0x12 @@ -68,9 +68,9 @@ #define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 0x13 #define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1 0x14 #define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1 0x15 -#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2 0x16 /* Shared with CV/TV and CRT */ -#define ENCODER_OBJECT_ID_SI178 0X17 /* External TMDS (dual link, no HDCP.) */ -#define ENCODER_OBJECT_ID_MVPU_FPGA 0x18 /* MVPU FPGA chip */ +#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2 0x16 /* Shared with CV/TV and CRT */ +#define ENCODER_OBJECT_ID_SI178 0X17 /* External TMDS (dual link, no HDCP.) */ +#define ENCODER_OBJECT_ID_MVPU_FPGA 0x18 /* MVPU FPGA chip */ #define ENCODER_OBJECT_ID_INTERNAL_DDI 0x19 #define ENCODER_OBJECT_ID_VT1625 0x1A #define ENCODER_OBJECT_ID_HDMI_SI1932 0x1B @@ -86,7 +86,7 @@ /****************************************************/ /* Connector Object ID Definition */ /****************************************************/ -#define CONNECTOR_OBJECT_ID_NONE 0x00 +#define CONNECTOR_OBJECT_ID_NONE 0x00 #define CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I 0x01 #define CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I 0x02 #define CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D 0x03 @@ -96,7 +96,7 @@ #define CONNECTOR_OBJECT_ID_SVIDEO 0x07 #define CONNECTOR_OBJECT_ID_YPbPr 0x08 #define CONNECTOR_OBJECT_ID_D_CONNECTOR 0x09 -#define CONNECTOR_OBJECT_ID_9PIN_DIN 0x0A /* Supports both CV & TV */ +#define CONNECTOR_OBJECT_ID_9PIN_DIN 0x0A /* Supports both CV & TV */ #define CONNECTOR_OBJECT_ID_SCART 0x0B #define CONNECTOR_OBJECT_ID_HDMI_TYPE_A 0x0C #define CONNECTOR_OBJECT_ID_HDMI_TYPE_B 0x0D @@ -116,7 +116,7 @@ #define ROUTER_OBJECT_ID_I2C_EXTENDER_CNTL 0x01 /****************************************************/ -/* Graphics Object ENUM ID Definition */ +// Graphics Object ENUM ID Definition */ /****************************************************/ #define GRAPH_OBJECT_ENUM_ID1 0x01 #define GRAPH_OBJECT_ENUM_ID2 0x02 @@ -133,35 +133,35 @@ #define RESERVED1_ID_MASK 0x0800 #define OBJECT_TYPE_MASK 0x7000 #define RESERVED2_ID_MASK 0x8000 - + #define OBJECT_ID_SHIFT 0x00 #define ENUM_ID_SHIFT 0x08 #define OBJECT_TYPE_SHIFT 0x0C + /****************************************************/ /* Graphics Object family definition */ /****************************************************/ -#define CONSTRUCTOBJECTFAMILYID(GRAPHICS_OBJECT_TYPE, GRAPHICS_OBJECT_ID) \ - (GRAPHICS_OBJECT_TYPE << OBJECT_TYPE_SHIFT | \ - GRAPHICS_OBJECT_ID << OBJECT_ID_SHIFT) +#define CONSTRUCTOBJECTFAMILYID(GRAPHICS_OBJECT_TYPE, GRAPHICS_OBJECT_ID) (GRAPHICS_OBJECT_TYPE << OBJECT_TYPE_SHIFT | \ + GRAPHICS_OBJECT_ID << OBJECT_ID_SHIFT) /****************************************************/ /* GPU Object ID definition - Shared with BIOS */ /****************************************************/ -#define GPU_ENUM_ID1 (GRAPH_OBJECT_TYPE_GPU << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT) +#define GPU_ENUM_ID1 ( GRAPH_OBJECT_TYPE_GPU << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT) /****************************************************/ /* Encoder Object ID definition - Shared with BIOS */ /****************************************************/ /* -#define ENCODER_INTERNAL_LVDS_ENUM_ID1 0x2101 +#define ENCODER_INTERNAL_LVDS_ENUM_ID1 0x2101 #define ENCODER_INTERNAL_TMDS1_ENUM_ID1 0x2102 #define ENCODER_INTERNAL_TMDS2_ENUM_ID1 0x2103 #define ENCODER_INTERNAL_DAC1_ENUM_ID1 0x2104 #define ENCODER_INTERNAL_DAC2_ENUM_ID1 0x2105 #define ENCODER_INTERNAL_SDVOA_ENUM_ID1 0x2106 #define ENCODER_INTERNAL_SDVOB_ENUM_ID1 0x2107 -#define ENCODER_SIL170B_ENUM_ID1 0x2108 +#define ENCODER_SIL170B_ENUM_ID1 0x2108 #define ENCODER_CH7303_ENUM_ID1 0x2109 #define ENCODER_CH7301_ENUM_ID1 0x210A #define ENCODER_INTERNAL_DVO1_ENUM_ID1 0x210B @@ -175,8 +175,8 @@ #define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID1 0x2113 #define ENCODER_INTERNAL_KLDSCP_DVO1_ENUM_ID1 0x2114 #define ENCODER_INTERNAL_KLDSCP_DAC1_ENUM_ID1 0x2115 -#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1 0x2116 -#define ENCODER_SI178_ENUM_ID1 0x2117 +#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1 0x2116 +#define ENCODER_SI178_ENUM_ID1 0x2117 #define ENCODER_MVPU_FPGA_ENUM_ID1 0x2118 #define ENCODER_INTERNAL_DDI_ENUM_ID1 0x2119 #define ENCODER_VT1625_ENUM_ID1 0x211A @@ -185,205 +185,169 @@ #define ENCODER_DP_DP501_ENUM_ID1 0x211D #define ENCODER_INTERNAL_UNIPHY_ENUM_ID1 0x211E */ -#define ENCODER_INTERNAL_LVDS_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_LVDS << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_LVDS_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_LVDS << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_TMDS1_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_TMDS1 << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_TMDS1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_TMDS1 << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_TMDS2_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_TMDS2 << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_TMDS2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_TMDS2 << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_DAC1_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_DAC1 << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_DAC1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_DAC1 << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_DAC2_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_DAC2 << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_DAC2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_DAC2 << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_SDVOA_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_SDVOA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_SDVOA_ENUM_ID2 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_SDVOA_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_SDVOB_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_SDVOB << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_SDVOB_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_SDVOB << OBJECT_ID_SHIFT) -#define ENCODER_SIL170B_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_SI170B << OBJECT_ID_SHIFT) +#define ENCODER_SIL170B_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_SI170B << OBJECT_ID_SHIFT) -#define ENCODER_CH7303_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_CH7303 << OBJECT_ID_SHIFT) +#define ENCODER_CH7303_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_CH7303 << OBJECT_ID_SHIFT) -#define ENCODER_CH7301_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_CH7301 << OBJECT_ID_SHIFT) +#define ENCODER_CH7301_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_CH7301 << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_DVO1_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_DVO1 << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_DVO1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_DVO1 << OBJECT_ID_SHIFT) -#define ENCODER_EXTERNAL_SDVOA_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT) +#define ENCODER_EXTERNAL_SDVOA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT) -#define ENCODER_EXTERNAL_SDVOA_ENUM_ID2 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT) +#define ENCODER_EXTERNAL_SDVOA_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT) -#define ENCODER_EXTERNAL_SDVOB_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_EXTERNAL_SDVOB << OBJECT_ID_SHIFT) -#define ENCODER_TITFP513_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_TITFP513 << OBJECT_ID_SHIFT) +#define ENCODER_EXTERNAL_SDVOB_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_EXTERNAL_SDVOB << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_LVTM1_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_LVTM1 << OBJECT_ID_SHIFT) -#define ENCODER_VT1623_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_VT1623 << OBJECT_ID_SHIFT) +#define ENCODER_TITFP513_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_TITFP513 << OBJECT_ID_SHIFT) -#define ENCODER_HDMI_SI1930_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_HDMI_SI1930 << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_LVTM1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_LVTM1 << OBJECT_ID_SHIFT) -#define ENCODER_HDMI_INTERNAL_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_HDMI_INTERNAL << OBJECT_ID_SHIFT) +#define ENCODER_VT1623_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_VT1623 << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT) +#define ENCODER_HDMI_SI1930_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_HDMI_SI1930 << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID2 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT) +#define ENCODER_HDMI_INTERNAL_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_HDMI_INTERNAL << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_KLDSCP_DVO1_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1 << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_KLDSCP_DAC1_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1 << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2 << OBJECT_ID_SHIFT) /* Shared with CV/TV and CRT */ +#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT) -#define ENCODER_SI178_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_SI178 << OBJECT_ID_SHIFT) -#define ENCODER_MVPU_FPGA_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_MVPU_FPGA << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_KLDSCP_DVO1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1 << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_DDI_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_DDI << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_KLDSCP_DAC1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1 << OBJECT_ID_SHIFT) -#define ENCODER_VT1625_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_VT1625 << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2 << OBJECT_ID_SHIFT) // Shared with CV/TV and CRT -#define ENCODER_HDMI_SI1932_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_HDMI_SI1932 << OBJECT_ID_SHIFT) +#define ENCODER_SI178_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_SI178 << OBJECT_ID_SHIFT) -#define ENCODER_DP_DP501_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_DP_DP501 << OBJECT_ID_SHIFT) +#define ENCODER_MVPU_FPGA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_MVPU_FPGA << OBJECT_ID_SHIFT) -#define ENCODER_DP_AN9801_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_DP_AN9801 << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_DDI_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_DDI << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_UNIPHY_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT) +#define ENCODER_VT1625_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_VT1625 << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_UNIPHY_ENUM_ID2 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT) +#define ENCODER_HDMI_SI1932_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_HDMI_SI1932 << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_KLDSCP_LVTMA_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA << OBJECT_ID_SHIFT) +#define ENCODER_DP_DP501_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_DP_DP501 << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT) +#define ENCODER_DP_AN9801_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_DP_AN9801 << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID2 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_UNIPHY_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_UNIPHY_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT) -#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID2 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_KLDSCP_LVTMA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA << OBJECT_ID_SHIFT) -#define ENCODER_GENERAL_EXTERNAL_DVO_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ENCODER_OBJECT_ID_GENERAL_EXTERNAL_DVO << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT) + +#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT) + +#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT) + +#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT) + +#define ENCODER_GENERAL_EXTERNAL_DVO_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_GENERAL_EXTERNAL_DVO << OBJECT_ID_SHIFT) /****************************************************/ /* Connector Object ID definition - Shared with BIOS */ @@ -406,158 +370,129 @@ #define CONNECTOR_7PIN_DIN_ENUM_ID1 0x310F #define CONNECTOR_PCIE_CONNECTOR_ENUM_ID1 0x3110 */ -#define CONNECTOR_LVDS_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_LVDS << OBJECT_ID_SHIFT) +#define CONNECTOR_LVDS_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_LVDS << OBJECT_ID_SHIFT) -#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT) +#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT) -#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID2 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT) +#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT) -#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT) +#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT) -#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID2 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT) +#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT) -#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT) +#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT) -#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID2 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT) +#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT) -#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT) +#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT) -#define CONNECTOR_VGA_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT) +#define CONNECTOR_VGA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT) -#define CONNECTOR_VGA_ENUM_ID2 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT) +#define CONNECTOR_VGA_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT) -#define CONNECTOR_COMPOSITE_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_COMPOSITE << OBJECT_ID_SHIFT) +#define CONNECTOR_COMPOSITE_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_COMPOSITE << OBJECT_ID_SHIFT) -#define CONNECTOR_SVIDEO_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_SVIDEO << OBJECT_ID_SHIFT) +#define CONNECTOR_SVIDEO_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_SVIDEO << OBJECT_ID_SHIFT) -#define CONNECTOR_YPbPr_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_YPbPr << OBJECT_ID_SHIFT) +#define CONNECTOR_YPbPr_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_YPbPr << OBJECT_ID_SHIFT) -#define CONNECTOR_D_CONNECTOR_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_D_CONNECTOR << OBJECT_ID_SHIFT) +#define CONNECTOR_D_CONNECTOR_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_D_CONNECTOR << OBJECT_ID_SHIFT) -#define CONNECTOR_9PIN_DIN_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_9PIN_DIN << OBJECT_ID_SHIFT) +#define CONNECTOR_9PIN_DIN_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_9PIN_DIN << OBJECT_ID_SHIFT) -#define CONNECTOR_SCART_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_SCART << OBJECT_ID_SHIFT) +#define CONNECTOR_SCART_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_SCART << OBJECT_ID_SHIFT) -#define CONNECTOR_HDMI_TYPE_A_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT) +#define CONNECTOR_HDMI_TYPE_A_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT) -#define CONNECTOR_HDMI_TYPE_B_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_HDMI_TYPE_B << OBJECT_ID_SHIFT) +#define CONNECTOR_HDMI_TYPE_B_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_HDMI_TYPE_B << OBJECT_ID_SHIFT) -#define CONNECTOR_7PIN_DIN_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_7PIN_DIN << OBJECT_ID_SHIFT) +#define CONNECTOR_7PIN_DIN_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_7PIN_DIN << OBJECT_ID_SHIFT) -#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT) +#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT) -#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID2 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT) +#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT) -#define CONNECTOR_CROSSFIRE_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT) +#define CONNECTOR_CROSSFIRE_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT) -#define CONNECTOR_CROSSFIRE_ENUM_ID2 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT) +#define CONNECTOR_CROSSFIRE_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT) -#define CONNECTOR_HARDCODE_DVI_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT) -#define CONNECTOR_HARDCODE_DVI_ENUM_ID2 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT) +#define CONNECTOR_HARDCODE_DVI_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT) -#define CONNECTOR_DISPLAYPORT_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT) +#define CONNECTOR_HARDCODE_DVI_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT) -#define CONNECTOR_DISPLAYPORT_ENUM_ID2 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT) +#define CONNECTOR_DISPLAYPORT_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT) -#define CONNECTOR_DISPLAYPORT_ENUM_ID3 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT) +#define CONNECTOR_DISPLAYPORT_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT) -#define CONNECTOR_DISPLAYPORT_ENUM_ID4 \ - (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\ - CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT) +#define CONNECTOR_DISPLAYPORT_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT) + +#define CONNECTOR_DISPLAYPORT_ENUM_ID4 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT) /****************************************************/ /* Router Object ID definition - Shared with BIOS */ /****************************************************/ -#define ROUTER_I2C_EXTENDER_CNTL_ENUM_ID1 \ - (GRAPH_OBJECT_TYPE_ROUTER << OBJECT_TYPE_SHIFT |\ - GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ - ROUTER_OBJECT_ID_I2C_EXTENDER_CNTL << OBJECT_ID_SHIFT) +#define ROUTER_I2C_EXTENDER_CNTL_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ROUTER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ROUTER_OBJECT_ID_I2C_EXTENDER_CNTL << OBJECT_ID_SHIFT) /* deleted */ @@ -567,6 +502,7 @@ #define GRAPHICS_OBJECT_CAP_I2C 0x00000001L #define GRAPHICS_OBJECT_CAP_TABLE_ID 0x00000002L + #define GRAPHICS_OBJECT_I2CCOMMAND_TABLE_ID 0x01 #define GRAPHICS_OBJECT_HOTPLUGDETECTIONINTERUPT_TABLE_ID 0x02 #define GRAPHICS_OBJECT_ENCODER_OUTPUT_PROTECTION_TABLE_ID 0x03 @@ -575,4 +511,8 @@ #pragma pack() #endif -#endif /*GRAPHICTYPE */ +#endif /*GRAPHICTYPE */ + + + + From f0f480adcb6c44e76186c6d3036e06ed7e7e0202 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 7 Jan 2010 11:39:07 -0500 Subject: [PATCH 0496/1626] drm/radeon/kms: pull in the latest upstream ObjectID.h changes Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/ObjectID.h | 127 +++++++++++++++++++++++++++++- 1 file changed, 126 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/ObjectID.h b/drivers/gpu/drm/radeon/ObjectID.h index f1f18a48cf69..c714179d1bfa 100644 --- a/drivers/gpu/drm/radeon/ObjectID.h +++ b/drivers/gpu/drm/radeon/ObjectID.h @@ -106,6 +106,8 @@ #define CONNECTOR_OBJECT_ID_CROSSFIRE 0x11 #define CONNECTOR_OBJECT_ID_HARDCODE_DVI 0x12 #define CONNECTOR_OBJECT_ID_DISPLAYPORT 0x13 +#define CONNECTOR_OBJECT_ID_eDP 0x14 +#define CONNECTOR_OBJECT_ID_MXM 0x15 /* deleted */ @@ -116,7 +118,15 @@ #define ROUTER_OBJECT_ID_I2C_EXTENDER_CNTL 0x01 /****************************************************/ -// Graphics Object ENUM ID Definition */ +/* Generic Object ID Definition */ +/****************************************************/ +#define GENERIC_OBJECT_ID_NONE 0x00 +#define GENERIC_OBJECT_ID_GLSYNC 0x01 +#define GENERIC_OBJECT_ID_PX2_NON_DRIVABLE 0x02 +#define GENERIC_OBJECT_ID_MXM_OPM 0x03 + +/****************************************************/ +/* Graphics Object ENUM ID Definition */ /****************************************************/ #define GRAPH_OBJECT_ENUM_ID1 0x01 #define GRAPH_OBJECT_ENUM_ID2 0x02 @@ -124,6 +134,7 @@ #define GRAPH_OBJECT_ENUM_ID4 0x04 #define GRAPH_OBJECT_ENUM_ID5 0x05 #define GRAPH_OBJECT_ENUM_ID6 0x06 +#define GRAPH_OBJECT_ENUM_ID7 0x07 /****************************************************/ /* Graphics Object ID Bit definition */ @@ -374,6 +385,18 @@ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ CONNECTOR_OBJECT_ID_LVDS << OBJECT_ID_SHIFT) +#define CONNECTOR_LVDS_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_LVDS << OBJECT_ID_SHIFT) + +#define CONNECTOR_eDP_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_eDP << OBJECT_ID_SHIFT) + +#define CONNECTOR_eDP_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_eDP << OBJECT_ID_SHIFT) + #define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT) @@ -402,6 +425,14 @@ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT) +#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT) + +#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT) + #define CONNECTOR_VGA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT) @@ -414,37 +445,76 @@ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ CONNECTOR_OBJECT_ID_COMPOSITE << OBJECT_ID_SHIFT) +#define CONNECTOR_COMPOSITE_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_COMPOSITE << OBJECT_ID_SHIFT) + #define CONNECTOR_SVIDEO_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ CONNECTOR_OBJECT_ID_SVIDEO << OBJECT_ID_SHIFT) +#define CONNECTOR_SVIDEO_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_SVIDEO << OBJECT_ID_SHIFT) + #define CONNECTOR_YPbPr_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ CONNECTOR_OBJECT_ID_YPbPr << OBJECT_ID_SHIFT) +#define CONNECTOR_YPbPr_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_YPbPr << OBJECT_ID_SHIFT) + #define CONNECTOR_D_CONNECTOR_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ CONNECTOR_OBJECT_ID_D_CONNECTOR << OBJECT_ID_SHIFT) +#define CONNECTOR_D_CONNECTOR_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_D_CONNECTOR << OBJECT_ID_SHIFT) + #define CONNECTOR_9PIN_DIN_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ CONNECTOR_OBJECT_ID_9PIN_DIN << OBJECT_ID_SHIFT) +#define CONNECTOR_9PIN_DIN_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_9PIN_DIN << OBJECT_ID_SHIFT) + #define CONNECTOR_SCART_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ CONNECTOR_OBJECT_ID_SCART << OBJECT_ID_SHIFT) +#define CONNECTOR_SCART_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_SCART << OBJECT_ID_SHIFT) + #define CONNECTOR_HDMI_TYPE_A_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT) +#define CONNECTOR_HDMI_TYPE_A_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT) + +#define CONNECTOR_HDMI_TYPE_A_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT) + #define CONNECTOR_HDMI_TYPE_B_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ CONNECTOR_OBJECT_ID_HDMI_TYPE_B << OBJECT_ID_SHIFT) +#define CONNECTOR_HDMI_TYPE_B_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_HDMI_TYPE_B << OBJECT_ID_SHIFT) + #define CONNECTOR_7PIN_DIN_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ CONNECTOR_OBJECT_ID_7PIN_DIN << OBJECT_ID_SHIFT) +#define CONNECTOR_7PIN_DIN_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_7PIN_DIN << OBJECT_ID_SHIFT) #define CONNECTOR_PCIE_CONNECTOR_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ @@ -487,6 +557,42 @@ GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT) +#define CONNECTOR_DISPLAYPORT_ENUM_ID5 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID5 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT) + +#define CONNECTOR_DISPLAYPORT_ENUM_ID6 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID6 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT) + +#define CONNECTOR_MXM_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_A + +#define CONNECTOR_MXM_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_B + +#define CONNECTOR_MXM_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_C + +#define CONNECTOR_MXM_ENUM_ID4 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_D + +#define CONNECTOR_MXM_ENUM_ID5 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID5 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_LVDS_TXxx + +#define CONNECTOR_MXM_ENUM_ID6 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID6 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_LVDS_UXxx + +#define CONNECTOR_MXM_ENUM_ID7 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID7 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DAC + /****************************************************/ /* Router Object ID definition - Shared with BIOS */ /****************************************************/ @@ -496,6 +602,25 @@ /* deleted */ +/****************************************************/ +/* Generic Object ID definition - Shared with BIOS */ +/****************************************************/ +#define GENERICOBJECT_GLSYNC_ENUM_ID1 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + GENERIC_OBJECT_ID_GLSYNC << OBJECT_ID_SHIFT) + +#define GENERICOBJECT_PX2_NON_DRIVABLE_ID1 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + GENERIC_OBJECT_ID_PX2_NON_DRIVABLE<< OBJECT_ID_SHIFT) + +#define GENERICOBJECT_PX2_NON_DRIVABLE_ID2 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + GENERIC_OBJECT_ID_PX2_NON_DRIVABLE<< OBJECT_ID_SHIFT) + +#define GENERICOBJECT_MXM_OPM_ENUM_ID1 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + GENERIC_OBJECT_ID_MXM_OPM << OBJECT_ID_SHIFT) + /****************************************************/ /* Object Cap definition - Shared with BIOS */ /****************************************************/ From 7970e677accb676f15e11468c60cb93ae477a513 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 7 Jan 2010 13:47:47 -0500 Subject: [PATCH 0497/1626] drm: Add eDP connector type Add a new connector type for eDP (embedded displayport) eDP is more or less the same as DP but there are some cases when you might want to handle it separately. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc.c | 1 + include/drm/drm_mode.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 4a7bbdbedfc2..fa19c2b9820f 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -158,6 +158,7 @@ static struct drm_conn_prop_enum_list drm_connector_enum_list[] = { DRM_MODE_CONNECTOR_HDMIA, "HDMI Type A", 0 }, { DRM_MODE_CONNECTOR_HDMIB, "HDMI Type B", 0 }, { DRM_MODE_CONNECTOR_TV, "TV", 0 }, + { DRM_MODE_CONNECTOR_eDP, "Embedded DisplayPort", 0 }, }; static struct drm_prop_enum_list drm_encoder_enum_list[] = diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h index 43009bc2e757..bc4fdf27bd2e 100644 --- a/include/drm/drm_mode.h +++ b/include/drm/drm_mode.h @@ -160,6 +160,7 @@ struct drm_mode_get_encoder { #define DRM_MODE_CONNECTOR_HDMIA 11 #define DRM_MODE_CONNECTOR_HDMIB 12 #define DRM_MODE_CONNECTOR_TV 13 +#define DRM_MODE_CONNECTOR_eDP 14 struct drm_mode_get_connector { From 196c58d21fc47fbabab6a98e23e5a6335f717e44 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 7 Jan 2010 14:22:32 -0500 Subject: [PATCH 0498/1626] drm/radeon/kms: add support for eDP (embedded DisplayPort) This is displayport used for internal connections such as laptop panels and systems with integrated monitors. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_dp.c | 6 ++++-- drivers/gpu/drm/radeon/radeon_atombios.c | 4 +++- drivers/gpu/drm/radeon/radeon_connectors.c | 23 ++++++++++++++++------ drivers/gpu/drm/radeon/radeon_display.c | 7 +++++-- drivers/gpu/drm/radeon/radeon_encoders.c | 4 +++- 5 files changed, 32 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 0d63c4436e7c..3eb0ca5b3d73 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -468,7 +468,8 @@ void radeon_dp_set_link_config(struct drm_connector *connector, struct radeon_connector *radeon_connector; struct radeon_connector_atom_dig *dig_connector; - if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) + if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) || + (connector->connector_type != DRM_MODE_CONNECTOR_eDP)) return; radeon_connector = to_radeon_connector(connector); @@ -582,7 +583,8 @@ void dp_link_train(struct drm_encoder *encoder, u8 train_set[4]; int i; - if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) + if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) || + (connector->connector_type != DRM_MODE_CONNECTOR_eDP)) return; if (!radeon_encoder->enc_priv) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 41dd8ebff219..183403540113 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -346,7 +346,9 @@ const int object_connector_convert[] = { DRM_MODE_CONNECTOR_Unknown, DRM_MODE_CONNECTOR_Unknown, DRM_MODE_CONNECTOR_Unknown, - DRM_MODE_CONNECTOR_DisplayPort + DRM_MODE_CONNECTOR_DisplayPort, + DRM_MODE_CONNECTOR_eDP, + DRM_MODE_CONNECTOR_Unknown }; bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index b82ae61d4d17..9da10dd5df80 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -49,8 +49,10 @@ void radeon_connector_hotplug(struct drm_connector *connector) if (radeon_connector->hpd.hpd != RADEON_HPD_NONE) radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd); - if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) { - if (radeon_dp_getsinktype(radeon_connector) == CONNECTOR_OBJECT_ID_DISPLAYPORT) { + if ((connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) || + (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) { + if ((radeon_dp_getsinktype(radeon_connector) == CONNECTOR_OBJECT_ID_DISPLAYPORT) || + (radeon_dp_getsinktype(radeon_connector) == CONNECTOR_OBJECT_ID_eDP)) { if (radeon_dp_needs_link_train(radeon_connector)) { if (connector->encoder) dp_link_train(connector->encoder, connector); @@ -967,7 +969,8 @@ static enum drm_connector_status radeon_dp_detect(struct drm_connector *connecto } sink_type = radeon_dp_getsinktype(radeon_connector); - if (sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) { + if ((sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) || + (sink_type == CONNECTOR_OBJECT_ID_eDP)) { if (radeon_dp_getdpcd(radeon_connector)) { radeon_dig_connector->dp_sink_type = sink_type; ret = connector_status_connected; @@ -992,7 +995,8 @@ static int radeon_dp_mode_valid(struct drm_connector *connector, /* XXX check mode bandwidth */ - if (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) + if ((radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) || + (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP)) return radeon_dp_mode_valid_helper(radeon_connector, mode); else return MODE_OK; @@ -1145,6 +1149,7 @@ radeon_add_atom_connector(struct drm_device *dev, subpixel_order = SubPixelHorizontalRGB; break; case DRM_MODE_CONNECTOR_DisplayPort: + case DRM_MODE_CONNECTOR_eDP: radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL); if (!radeon_dig_connector) goto failed; @@ -1157,10 +1162,16 @@ radeon_add_atom_connector(struct drm_device *dev, goto failed; if (i2c_bus->valid) { /* add DP i2c bus */ - radeon_dig_connector->dp_i2c_bus = radeon_i2c_create_dp(dev, i2c_bus, "DP-auxch"); + if (connector_type == DRM_MODE_CONNECTOR_eDP) + radeon_dig_connector->dp_i2c_bus = radeon_i2c_create_dp(dev, i2c_bus, "eDP-auxch"); + else + radeon_dig_connector->dp_i2c_bus = radeon_i2c_create_dp(dev, i2c_bus, "DP-auxch"); if (!radeon_dig_connector->dp_i2c_bus) goto failed; - radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DP"); + if (connector_type == DRM_MODE_CONNECTOR_eDP) + radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "eDP"); + else + radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DP"); if (!radeon_connector->ddc_bus) goto failed; } diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 1fb2f029d7e8..0ec491ead2ff 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -234,7 +234,7 @@ static const char *encoder_names[34] = { "INTERNAL_UNIPHY2", }; -static const char *connector_names[13] = { +static const char *connector_names[15] = { "Unknown", "VGA", "DVI-I", @@ -248,6 +248,8 @@ static const char *connector_names[13] = { "DisplayPort", "HDMI-A", "HDMI-B", + "TV", + "eDP", }; static const char *hpd_names[7] = { @@ -352,7 +354,8 @@ int radeon_ddc_get_modes(struct radeon_connector *radeon_connector) { int ret = 0; - if (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) { + if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) || + (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) { struct radeon_connector_atom_dig *dig = radeon_connector->con_priv; if (dig->dp_i2c_bus) radeon_connector->edid = drm_get_edid(&radeon_connector->base, &dig->dp_i2c_bus->adapter); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 844c513f7244..82eb551970b9 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -596,8 +596,10 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) return ATOM_ENCODER_MODE_LVDS; break; case DRM_MODE_CONNECTOR_DisplayPort: + case DRM_MODE_CONNECTOR_eDP: radeon_dig_connector = radeon_connector->con_priv; - if (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) + if ((radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) || + (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP)) return ATOM_ENCODER_MODE_DP; else if (drm_detect_hdmi_monitor(radeon_connector->edid)) return ATOM_ENCODER_MODE_HDMI; From fc9a89f97e532152ae614d5ce717b81c8f8b0e91 Mon Sep 17 00:00:00 2001 From: Darren Jenkins Date: Thu, 7 Jan 2010 01:35:21 -0500 Subject: [PATCH 0499/1626] drm/radeon: fix a couple of array index errors There are a couple of array overruns, and some associated confusion in the code. This is just a wild guess at what the code should actually look like. Coverity CID: 13305 13306 agd5f: fix up the original intent of the timing code Signed-off-by: Darren Jenkins Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_legacy_tv.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_tv.c b/drivers/gpu/drm/radeon/radeon_legacy_tv.c index 3a12bb0c0563..417684daef4c 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_tv.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_tv.c @@ -77,7 +77,7 @@ struct radeon_tv_mode_constants { unsigned pix_to_tv; }; -static const uint16_t hor_timing_NTSC[] = { +static const uint16_t hor_timing_NTSC[MAX_H_CODE_TIMING_LEN] = { 0x0007, 0x003f, 0x0263, @@ -98,7 +98,7 @@ static const uint16_t hor_timing_NTSC[] = { 0 }; -static const uint16_t vert_timing_NTSC[] = { +static const uint16_t vert_timing_NTSC[MAX_V_CODE_TIMING_LEN] = { 0x2001, 0x200d, 0x1006, @@ -115,7 +115,7 @@ static const uint16_t vert_timing_NTSC[] = { 0 }; -static const uint16_t hor_timing_PAL[] = { +static const uint16_t hor_timing_PAL[MAX_H_CODE_TIMING_LEN] = { 0x0007, 0x0058, 0x027c, @@ -136,7 +136,7 @@ static const uint16_t hor_timing_PAL[] = { 0 }; -static const uint16_t vert_timing_PAL[] = { +static const uint16_t vert_timing_PAL[MAX_V_CODE_TIMING_LEN] = { 0x2001, 0x200c, 0x1005, @@ -623,9 +623,9 @@ void radeon_legacy_tv_mode_set(struct drm_encoder *encoder, } flicker_removal = (tmp + 500) / 1000; - if (flicker_removal < 3) - flicker_removal = 3; - for (i = 0; i < 6; ++i) { + if (flicker_removal < 2) + flicker_removal = 2; + for (i = 0; i < ARRAY_SIZE(SLOPE_limit); ++i) { if (flicker_removal == SLOPE_limit[i]) break; } From 06b6476d6b291473d0928ed242158a001d50c0f0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 5 Jan 2010 11:27:29 -0500 Subject: [PATCH 0500/1626] drm/radeon/kms: detect sideport memory on IGP chips This detects if the sideport memory is enabled and if it is VRAM is evicted on suspend/resume. This should fix s/r issues on some IGPs. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 4 +++ drivers/gpu/drm/radeon/radeon.h | 4 ++- drivers/gpu/drm/radeon/radeon_atombios.c | 37 ++++++++++++++++++++++++ drivers/gpu/drm/radeon/radeon_combios.c | 14 +++++++++ drivers/gpu/drm/radeon/radeon_object.c | 5 ++-- drivers/gpu/drm/radeon/rs400.c | 1 + drivers/gpu/drm/radeon/rs600.c | 1 + drivers/gpu/drm/radeon/rs690.c | 1 + 8 files changed, 64 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 5c6058c6ddde..921926f3d1f3 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -726,6 +726,10 @@ int r600_mc_init(struct radeon_device *rdev) a.full = rfixed_const(100); rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk); rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a); + + if (rdev->flags & RADEON_IS_IGP) + rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev); + return 0; } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 53b55608102b..a7e349dc4b97 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -319,10 +319,12 @@ struct radeon_mc { u64 real_vram_size; int vram_mtrr; bool vram_is_ddr; + bool igp_sideport_enabled; }; int radeon_mc_setup(struct radeon_device *rdev); - +bool radeon_combios_sideport_present(struct radeon_device *rdev); +bool radeon_atombios_sideport_present(struct radeon_device *rdev); /* * GPU scratch registers structures, functions & helpers diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 183403540113..fa82ca74324e 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -938,6 +938,43 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) return false; } +union igp_info { + struct _ATOM_INTEGRATED_SYSTEM_INFO info; + struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 info_2; +}; + +bool radeon_atombios_sideport_present(struct radeon_device *rdev) +{ + struct radeon_mode_info *mode_info = &rdev->mode_info; + int index = GetIndexIntoMasterTable(DATA, IntegratedSystemInfo); + union igp_info *igp_info; + u8 frev, crev; + u16 data_offset; + + atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, + &crev, &data_offset); + + igp_info = (union igp_info *)(mode_info->atom_context->bios + + data_offset); + + if (igp_info) { + switch (crev) { + case 1: + if (igp_info->info.ucMemoryType & 0xf0) + return true; + break; + case 2: + if (igp_info->info_2.ucMemoryType & 0x0f) + return true; + break; + default: + DRM_ERROR("Unsupported IGP table: %d %d\n", frev, crev); + break; + } + } + return false; +} + bool radeon_atombios_get_tmds_info(struct radeon_encoder *encoder, struct radeon_encoder_int_tmds *tmds) { diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 58f342659cc7..7914455c96ca 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -595,6 +595,20 @@ bool radeon_combios_get_clock_info(struct drm_device *dev) return false; } +bool radeon_combios_sideport_present(struct radeon_device *rdev) +{ + struct drm_device *dev = rdev->ddev; + u16 igp_info; + + igp_info = combios_get_table_offset(dev, COMBIOS_INTEGRATED_SYSTEM_INFO_TABLE); + + if (igp_info) { + if (RBIOS16(igp_info + 0x4)) + return true; + } + return false; +} + static const uint32_t default_primarydac_adj[CHIP_LAST] = { 0x00000808, /* r100 */ 0x00000808, /* rv100 */ diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index d9ffe1f56e8f..4e636de877b2 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -221,8 +221,9 @@ int radeon_bo_unpin(struct radeon_bo *bo) int radeon_bo_evict_vram(struct radeon_device *rdev) { if (rdev->flags & RADEON_IS_IGP) { - /* Useless to evict on IGP chips */ - return 0; + if (rdev->mc.igp_sideport_enabled == false) + /* Useless to evict on IGP chips */ + return 0; } return ttm_bo_evict_mm(&rdev->mman.bdev, TTM_PL_VRAM); } diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index 368415df5f3a..bf7b3cf80ed7 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -356,6 +356,7 @@ static int rs400_mc_init(struct radeon_device *rdev) rdev->mc.vram_location = G_00015C_MC_FB_START(tmp) << 16; rdev->mc.gtt_location = 0xFFFFFFFFUL; r = radeon_mc_setup(rdev); + rdev->mc.igp_sideport_enabled = radeon_combios_sideport_present(rdev); if (r) return r; return 0; diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 4245218e954f..19258943a370 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -56,6 +56,7 @@ int rs600_mc_init(struct radeon_device *rdev) rdev->mc.vram_location = G_000004_MC_FB_START(tmp) << 16; rdev->mc.gtt_location = 0xffffffffUL; r = radeon_mc_setup(rdev); + rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev); if (r) return r; return 0; diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index 1e22f52d6039..42f27205a597 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -172,6 +172,7 @@ static int rs690_mc_init(struct radeon_device *rdev) rdev->mc.vram_location = G_000100_MC_FB_START(tmp) << 16; rdev->mc.gtt_location = 0xFFFFFFFFUL; r = radeon_mc_setup(rdev); + rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev); if (r) return r; return 0; From 62cdc0c20663ef840a94850892517b2b7f584904 Mon Sep 17 00:00:00 2001 From: Corbin Simpson Date: Wed, 6 Jan 2010 19:28:48 +0100 Subject: [PATCH 0501/1626] drm/radeon/kms: Workaround RV410/R420 CP errata (V3) Long story short, this fixes sporadic hardlocks with my rv410 during times of intense 2D acceleration (Flash on Fx3). V2: Fix indentation and move errata_fini to suspend function so we don't leak scratch register over suspend/resume cycle. V3: Move scratch_reg to asic specific structure (aim is to slowly move stuff to asic specific structure and avoid poluting radeon_device struct with asic specific variables) Signed-off-by: Corbin Simpson Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r420.c | 31 +++++++++++++++++++++++++++++++ drivers/gpu/drm/radeon/radeon.h | 1 + 2 files changed, 32 insertions(+) diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index c05a7270cf0c..f46502a253ec 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -30,6 +30,7 @@ #include "radeon_reg.h" #include "radeon.h" #include "atom.h" +#include "r100d.h" #include "r420d.h" int r420_mc_init(struct radeon_device *rdev) @@ -165,6 +166,34 @@ static void r420_clock_resume(struct radeon_device *rdev) WREG32_PLL(R_00000D_SCLK_CNTL, sclk_cntl); } +static void r420_cp_errata_init(struct radeon_device *rdev) +{ + /* RV410 and R420 can lock up if CP DMA to host memory happens + * while the 2D engine is busy. + * + * The proper workaround is to queue a RESYNC at the beginning + * of the CP init, apparently. + */ + radeon_scratch_get(rdev, &rdev->config.r300.resync_scratch); + radeon_ring_lock(rdev, 8); + radeon_ring_write(rdev, PACKET0(R300_CP_RESYNC_ADDR, 1)); + radeon_ring_write(rdev, rdev->config.r300.resync_scratch); + radeon_ring_write(rdev, 0xDEADBEEF); + radeon_ring_unlock_commit(rdev); +} + +static void r420_cp_errata_fini(struct radeon_device *rdev) +{ + /* Catch the RESYNC we dispatched all the way back, + * at the very beginning of the CP init. + */ + radeon_ring_lock(rdev, 8); + radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); + radeon_ring_write(rdev, R300_RB3D_DC_FINISH); + radeon_ring_unlock_commit(rdev); + radeon_scratch_free(rdev, rdev->config.r300.resync_scratch); +} + static int r420_startup(struct radeon_device *rdev) { int r; @@ -196,6 +225,7 @@ static int r420_startup(struct radeon_device *rdev) dev_err(rdev->dev, "failled initializing CP (%d).\n", r); return r; } + r420_cp_errata_init(rdev); r = r100_wb_init(rdev); if (r) { dev_err(rdev->dev, "failled initializing WB (%d).\n", r); @@ -238,6 +268,7 @@ int r420_resume(struct radeon_device *rdev) int r420_suspend(struct radeon_device *rdev) { + r420_cp_errata_fini(rdev); r100_cp_disable(rdev); r100_wb_disable(rdev); r100_irq_disable(rdev); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index a7e349dc4b97..cee8bdc6c9ff 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -674,6 +674,7 @@ struct r100_asic { struct r300_asic { const unsigned *reg_safe_bm; unsigned reg_safe_bm_size; + u32 resync_scratch; }; struct r600_asic { From cafe6609d6dc0a6a278f9fdbb59ce4d761a35ddd Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 7 Jan 2010 12:39:21 +0100 Subject: [PATCH 0502/1626] drm/radeon/kms: Schedule host path read cache flush through the ring V2 R300 family will hard lockup if host path read cache flush is done through MMIO to HOST_PATH_CNTL. But scheduling same flush through ring seems harmless. This patch remove the hdp_flush callback and add a flush after each fence emission which means a flush after each IB schedule. Thus we should have same behavior without the hard lockup. Tested on R100,R200,R300,R400,R500,R600,R700 family. V2: Adjust fence counts in r600_blit_prepare_copy() Signed-off-by: Jerome Glisse Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 14 ++++++-------- drivers/gpu/drm/radeon/r300.c | 16 +++++++++++++++- drivers/gpu/drm/radeon/r420.c | 1 + drivers/gpu/drm/radeon/r520.c | 1 + drivers/gpu/drm/radeon/r600.c | 7 ++----- drivers/gpu/drm/radeon/r600_blit_kms.c | 4 ++-- drivers/gpu/drm/radeon/radeon.h | 4 ++-- drivers/gpu/drm/radeon/radeon_asic.h | 12 ------------ drivers/gpu/drm/radeon/radeon_gem.c | 2 -- drivers/gpu/drm/radeon/rs400.c | 1 + drivers/gpu/drm/radeon/rs600.c | 1 + drivers/gpu/drm/radeon/rs690.c | 1 + drivers/gpu/drm/radeon/rv515.c | 1 + 13 files changed, 33 insertions(+), 32 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 71727460968f..1a056b774eec 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -356,6 +356,11 @@ void r100_fence_ring_emit(struct radeon_device *rdev, /* Wait until IDLE & CLEAN */ radeon_ring_write(rdev, PACKET0(0x1720, 0)); radeon_ring_write(rdev, (1 << 16) | (1 << 17)); + radeon_ring_write(rdev, PACKET0(RADEON_HOST_PATH_CNTL, 0)); + radeon_ring_write(rdev, rdev->config.r100.hdp_cntl | + RADEON_HDP_READ_BUFFER_INVALIDATE); + radeon_ring_write(rdev, PACKET0(RADEON_HOST_PATH_CNTL, 0)); + radeon_ring_write(rdev, rdev->config.r100.hdp_cntl); /* Emit fence sequence & fire IRQ */ radeon_ring_write(rdev, PACKET0(rdev->fence_drv.scratch_reg, 0)); radeon_ring_write(rdev, fence->seq); @@ -1713,14 +1718,6 @@ void r100_gpu_init(struct radeon_device *rdev) r100_hdp_reset(rdev); } -void r100_hdp_flush(struct radeon_device *rdev) -{ - u32 tmp; - tmp = RREG32(RADEON_HOST_PATH_CNTL); - tmp |= RADEON_HDP_READ_BUFFER_INVALIDATE; - WREG32(RADEON_HOST_PATH_CNTL, tmp); -} - void r100_hdp_reset(struct radeon_device *rdev) { uint32_t tmp; @@ -3313,6 +3310,7 @@ static int r100_startup(struct radeon_device *rdev) } /* Enable IRQ */ r100_irq_set(rdev); + rdev->config.r100.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ r = r100_cp_init(rdev, 1024 * 1024); if (r) { diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 3f2cc9e2e8d9..b8623b734a27 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -36,7 +36,15 @@ #include "rv350d.h" #include "r300_reg_safe.h" -/* This files gather functions specifics to: r300,r350,rv350,rv370,rv380 */ +/* This files gather functions specifics to: r300,r350,rv350,rv370,rv380 + * + * GPU Errata: + * - HOST_PATH_CNTL: r300 family seems to dislike write to HOST_PATH_CNTL + * using MMIO to flush host path read cache, this lead to HARDLOCKUP. + * However, scheduling such write to the ring seems harmless, i suspect + * the CP read collide with the flush somehow, or maybe the MC, hard to + * tell. (Jerome Glisse) + */ /* * rv370,rv380 PCIE GART @@ -178,6 +186,11 @@ void r300_fence_ring_emit(struct radeon_device *rdev, /* Wait until IDLE & CLEAN */ radeon_ring_write(rdev, PACKET0(0x1720, 0)); radeon_ring_write(rdev, (1 << 17) | (1 << 16) | (1 << 9)); + radeon_ring_write(rdev, PACKET0(RADEON_HOST_PATH_CNTL, 0)); + radeon_ring_write(rdev, rdev->config.r300.hdp_cntl | + RADEON_HDP_READ_BUFFER_INVALIDATE); + radeon_ring_write(rdev, PACKET0(RADEON_HOST_PATH_CNTL, 0)); + radeon_ring_write(rdev, rdev->config.r300.hdp_cntl); /* Emit fence sequence & fire IRQ */ radeon_ring_write(rdev, PACKET0(rdev->fence_drv.scratch_reg, 0)); radeon_ring_write(rdev, fence->seq); @@ -1258,6 +1271,7 @@ static int r300_startup(struct radeon_device *rdev) } /* Enable IRQ */ r100_irq_set(rdev); + rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ r = r100_cp_init(rdev, 1024 * 1024); if (r) { diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index f46502a253ec..1d4d16ed7db1 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -219,6 +219,7 @@ static int r420_startup(struct radeon_device *rdev) r420_pipes_init(rdev); /* Enable IRQ */ r100_irq_set(rdev); + rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ r = r100_cp_init(rdev, 1024 * 1024); if (r) { diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index 0f3843b6dac7..9a189072f2b9 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -186,6 +186,7 @@ static int r520_startup(struct radeon_device *rdev) } /* Enable IRQ */ rs600_irq_set(rdev); + rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ r = r100_cp_init(rdev, 1024 * 1024); if (r) { diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 921926f3d1f3..e2f43c184aa9 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1388,11 +1388,6 @@ void r600_pciep_wreg(struct radeon_device *rdev, u32 reg, u32 v) (void)RREG32(PCIE_PORT_DATA); } -void r600_hdp_flush(struct radeon_device *rdev) -{ - WREG32(R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL, 0x1); -} - /* * CP & Ring */ @@ -1789,6 +1784,8 @@ void r600_fence_ring_emit(struct radeon_device *rdev, radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1)); radeon_ring_write(rdev, ((rdev->fence_drv.scratch_reg - PACKET3_SET_CONFIG_REG_OFFSET) >> 2)); radeon_ring_write(rdev, fence->seq); + radeon_ring_write(rdev, PACKET0(R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL, 0)); + radeon_ring_write(rdev, 1); /* CP_INTERRUPT packet 3 no longer exists, use packet 0 */ radeon_ring_write(rdev, PACKET0(CP_INT_STATUS, 0)); radeon_ring_write(rdev, RB_INT_STAT); diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index 9aecafb51b66..8787ea89dc6e 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -577,9 +577,9 @@ int r600_blit_prepare_copy(struct radeon_device *rdev, int size_bytes) ring_size = num_loops * dwords_per_loop; /* set default + shaders */ ring_size += 40; /* shaders + def state */ - ring_size += 5; /* fence emit for VB IB */ + ring_size += 7; /* fence emit for VB IB */ ring_size += 5; /* done copy */ - ring_size += 5; /* fence emit for done copy */ + ring_size += 7; /* fence emit for done copy */ r = radeon_ring_lock(rdev, ring_size); WARN_ON(r); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index cee8bdc6c9ff..eb5f99b9469d 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -656,7 +656,6 @@ struct radeon_asic { uint32_t offset, uint32_t obj_size); int (*clear_surface_reg)(struct radeon_device *rdev, int reg); void (*bandwidth_update)(struct radeon_device *rdev); - void (*hdp_flush)(struct radeon_device *rdev); void (*hpd_init)(struct radeon_device *rdev); void (*hpd_fini)(struct radeon_device *rdev); bool (*hpd_sense)(struct radeon_device *rdev, enum radeon_hpd_id hpd); @@ -669,12 +668,14 @@ struct radeon_asic { struct r100_asic { const unsigned *reg_safe_bm; unsigned reg_safe_bm_size; + u32 hdp_cntl; }; struct r300_asic { const unsigned *reg_safe_bm; unsigned reg_safe_bm_size; u32 resync_scratch; + u32 hdp_cntl; }; struct r600_asic { @@ -1010,7 +1011,6 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v) #define radeon_set_surface_reg(rdev, r, f, p, o, s) ((rdev)->asic->set_surface_reg((rdev), (r), (f), (p), (o), (s))) #define radeon_clear_surface_reg(rdev, r) ((rdev)->asic->clear_surface_reg((rdev), (r))) #define radeon_bandwidth_update(rdev) (rdev)->asic->bandwidth_update((rdev)) -#define radeon_hdp_flush(rdev) (rdev)->asic->hdp_flush((rdev)) #define radeon_hpd_init(rdev) (rdev)->asic->hpd_init((rdev)) #define radeon_hpd_fini(rdev) (rdev)->asic->hpd_fini((rdev)) #define radeon_hpd_sense(rdev, hpd) (rdev)->asic->hpd_sense((rdev), (hpd)) diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index eb29217bbf1d..f2fbd2e4e9df 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -77,7 +77,6 @@ int r100_clear_surface_reg(struct radeon_device *rdev, int reg); void r100_bandwidth_update(struct radeon_device *rdev); void r100_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib); int r100_ring_test(struct radeon_device *rdev); -void r100_hdp_flush(struct radeon_device *rdev); void r100_hpd_init(struct radeon_device *rdev); void r100_hpd_fini(struct radeon_device *rdev); bool r100_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd); @@ -114,7 +113,6 @@ static struct radeon_asic r100_asic = { .set_surface_reg = r100_set_surface_reg, .clear_surface_reg = r100_clear_surface_reg, .bandwidth_update = &r100_bandwidth_update, - .hdp_flush = &r100_hdp_flush, .hpd_init = &r100_hpd_init, .hpd_fini = &r100_hpd_fini, .hpd_sense = &r100_hpd_sense, @@ -174,7 +172,6 @@ static struct radeon_asic r300_asic = { .set_surface_reg = r100_set_surface_reg, .clear_surface_reg = r100_clear_surface_reg, .bandwidth_update = &r100_bandwidth_update, - .hdp_flush = &r100_hdp_flush, .hpd_init = &r100_hpd_init, .hpd_fini = &r100_hpd_fini, .hpd_sense = &r100_hpd_sense, @@ -218,7 +215,6 @@ static struct radeon_asic r420_asic = { .set_surface_reg = r100_set_surface_reg, .clear_surface_reg = r100_clear_surface_reg, .bandwidth_update = &r100_bandwidth_update, - .hdp_flush = &r100_hdp_flush, .hpd_init = &r100_hpd_init, .hpd_fini = &r100_hpd_fini, .hpd_sense = &r100_hpd_sense, @@ -267,7 +263,6 @@ static struct radeon_asic rs400_asic = { .set_surface_reg = r100_set_surface_reg, .clear_surface_reg = r100_clear_surface_reg, .bandwidth_update = &r100_bandwidth_update, - .hdp_flush = &r100_hdp_flush, .hpd_init = &r100_hpd_init, .hpd_fini = &r100_hpd_fini, .hpd_sense = &r100_hpd_sense, @@ -324,7 +319,6 @@ static struct radeon_asic rs600_asic = { .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, .bandwidth_update = &rs600_bandwidth_update, - .hdp_flush = &r100_hdp_flush, .hpd_init = &rs600_hpd_init, .hpd_fini = &rs600_hpd_fini, .hpd_sense = &rs600_hpd_sense, @@ -372,7 +366,6 @@ static struct radeon_asic rs690_asic = { .set_surface_reg = r100_set_surface_reg, .clear_surface_reg = r100_clear_surface_reg, .bandwidth_update = &rs690_bandwidth_update, - .hdp_flush = &r100_hdp_flush, .hpd_init = &rs600_hpd_init, .hpd_fini = &rs600_hpd_fini, .hpd_sense = &rs600_hpd_sense, @@ -424,7 +417,6 @@ static struct radeon_asic rv515_asic = { .set_surface_reg = r100_set_surface_reg, .clear_surface_reg = r100_clear_surface_reg, .bandwidth_update = &rv515_bandwidth_update, - .hdp_flush = &r100_hdp_flush, .hpd_init = &rs600_hpd_init, .hpd_fini = &rs600_hpd_fini, .hpd_sense = &rs600_hpd_sense, @@ -467,7 +459,6 @@ static struct radeon_asic r520_asic = { .set_surface_reg = r100_set_surface_reg, .clear_surface_reg = r100_clear_surface_reg, .bandwidth_update = &rv515_bandwidth_update, - .hdp_flush = &r100_hdp_flush, .hpd_init = &rs600_hpd_init, .hpd_fini = &rs600_hpd_fini, .hpd_sense = &rs600_hpd_sense, @@ -508,7 +499,6 @@ int r600_ring_test(struct radeon_device *rdev); int r600_copy_blit(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, unsigned num_pages, struct radeon_fence *fence); -void r600_hdp_flush(struct radeon_device *rdev); void r600_hpd_init(struct radeon_device *rdev); void r600_hpd_fini(struct radeon_device *rdev); bool r600_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd); @@ -544,7 +534,6 @@ static struct radeon_asic r600_asic = { .set_surface_reg = r600_set_surface_reg, .clear_surface_reg = r600_clear_surface_reg, .bandwidth_update = &rv515_bandwidth_update, - .hdp_flush = &r600_hdp_flush, .hpd_init = &r600_hpd_init, .hpd_fini = &r600_hpd_fini, .hpd_sense = &r600_hpd_sense, @@ -589,7 +578,6 @@ static struct radeon_asic rv770_asic = { .set_surface_reg = r600_set_surface_reg, .clear_surface_reg = r600_clear_surface_reg, .bandwidth_update = &rv515_bandwidth_update, - .hdp_flush = &r600_hdp_flush, .hpd_init = &r600_hpd_init, .hpd_fini = &r600_hpd_fini, .hpd_sense = &r600_hpd_sense, diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index 60df2d7e7e4c..0e1325e18534 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -131,7 +131,6 @@ int radeon_gem_set_domain(struct drm_gem_object *gobj, printk(KERN_ERR "Failed to wait for object !\n"); return r; } - radeon_hdp_flush(robj->rdev); } return 0; } @@ -312,7 +311,6 @@ int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data, mutex_lock(&dev->struct_mutex); drm_gem_object_unreference(gobj); mutex_unlock(&dev->struct_mutex); - radeon_hdp_flush(robj->rdev); return r; } diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index bf7b3cf80ed7..9f5418983e2a 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -396,6 +396,7 @@ static int rs400_startup(struct radeon_device *rdev) return r; /* Enable IRQ */ r100_irq_set(rdev); + rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ r = r100_cp_init(rdev, 1024 * 1024); if (r) { diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 19258943a370..a0378c57e4ec 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -554,6 +554,7 @@ static int rs600_startup(struct radeon_device *rdev) return r; /* Enable IRQ */ rs600_irq_set(rdev); + rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ r = r100_cp_init(rdev, 1024 * 1024); if (r) { diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index 42f27205a597..cd31da913771 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -626,6 +626,7 @@ static int rs690_startup(struct radeon_device *rdev) return r; /* Enable IRQ */ rs600_irq_set(rdev); + rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ r = r100_cp_init(rdev, 1024 * 1024); if (r) { diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 59632a506b46..62756717b044 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -479,6 +479,7 @@ static int rv515_startup(struct radeon_device *rdev) } /* Enable IRQ */ rs600_irq_set(rdev); + rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ r = r100_cp_init(rdev, 1024 * 1024); if (r) { From d0269ed8580b492df75dafb011dc51a1390bf200 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 7 Jan 2010 16:08:32 +0100 Subject: [PATCH 0503/1626] drm/radeon/kms: Make sure we release AGP device if we acquired it In some case we weren't releasing the AGP device at module unloading. This leaded to unfunctional AGP at next module load. This patch make sure we release the AGP bus if we acquire it. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 1 + drivers/gpu/drm/radeon/r300.c | 1 + drivers/gpu/drm/radeon/r600.c | 3 +-- drivers/gpu/drm/radeon/radeon_agp.c | 6 ++---- drivers/gpu/drm/radeon/rv770.c | 3 +-- 5 files changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 1a056b774eec..d2b789e67c39 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3369,6 +3369,7 @@ void r100_fini(struct radeon_device *rdev) radeon_gem_fini(rdev); if (rdev->flags & RADEON_IS_PCI) r100_pci_gart_fini(rdev); + radeon_agp_fini(rdev); radeon_irq_kms_fini(rdev); radeon_fence_driver_fini(rdev); radeon_bo_fini(rdev); diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index b8623b734a27..0051d11b907c 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -1336,6 +1336,7 @@ void r300_fini(struct radeon_device *rdev) rv370_pcie_gart_fini(rdev); if (rdev->flags & RADEON_IS_PCI) r100_pci_gart_fini(rdev); + radeon_agp_fini(rdev); radeon_irq_kms_fini(rdev); radeon_fence_driver_fini(rdev); radeon_bo_fini(rdev); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index e2f43c184aa9..0c065f425c84 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2090,8 +2090,7 @@ void r600_fini(struct radeon_device *rdev) radeon_gem_fini(rdev); radeon_fence_driver_fini(rdev); radeon_clocks_fini(rdev); - if (rdev->flags & RADEON_IS_AGP) - radeon_agp_fini(rdev); + radeon_agp_fini(rdev); radeon_bo_fini(rdev); radeon_atombios_fini(rdev); kfree(rdev->bios); diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c index 54bf49a6d676..220f454ea9fa 100644 --- a/drivers/gpu/drm/radeon/radeon_agp.c +++ b/drivers/gpu/drm/radeon/radeon_agp.c @@ -252,10 +252,8 @@ void radeon_agp_resume(struct radeon_device *rdev) void radeon_agp_fini(struct radeon_device *rdev) { #if __OS_HAS_AGP - if (rdev->flags & RADEON_IS_AGP) { - if (rdev->ddev->agp && rdev->ddev->agp->acquired) { - drm_agp_release(rdev->ddev); - } + if (rdev->ddev->agp && rdev->ddev->agp->acquired) { + drm_agp_release(rdev->ddev); } #endif } diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index f58dc6710802..16f7317fa1af 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -1096,8 +1096,7 @@ void rv770_fini(struct radeon_device *rdev) radeon_gem_fini(rdev); radeon_fence_driver_fini(rdev); radeon_clocks_fini(rdev); - if (rdev->flags & RADEON_IS_AGP) - radeon_agp_fini(rdev); + radeon_agp_fini(rdev); radeon_bo_fini(rdev); radeon_atombios_fini(rdev); kfree(rdev->bios); From 059d233f9c1183ed2f59d631e4daf486060e880d Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 7 Jan 2010 02:59:31 +0300 Subject: [PATCH 0504/1626] drm/radeon: mkregtable.c: close a file before exit Signed-off-by: Alexander Beregalov Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/mkregtable.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/mkregtable.c b/drivers/gpu/drm/radeon/mkregtable.c index 0d79577c1576..607241c6a8a9 100644 --- a/drivers/gpu/drm/radeon/mkregtable.c +++ b/drivers/gpu/drm/radeon/mkregtable.c @@ -661,8 +661,10 @@ static int parser_auth(struct table *t, const char *filename) fseek(file, 0, SEEK_SET); /* get header */ - if (fgets(buf, 1024, file) == NULL) + if (fgets(buf, 1024, file) == NULL) { + fclose(file); return -1; + } /* first line will contain the last register * and gpu name */ From e77cef9c2d87db835ad9d70cde4a9b00b0ca2262 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 7 Jan 2010 15:39:13 +0100 Subject: [PATCH 0505/1626] drm: Avoid calling vblank function is vblank wasn't initialized In some case vblank might not be initialized and we shouldn't try to use associated function. This patch make sure this is the case. It also export drm_vblank_cleanup so driver can cleanup vblank if for any reason IRQ/MSI is not working. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 7998ee66b317..b98384dbd9a7 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -115,6 +115,7 @@ void drm_vblank_cleanup(struct drm_device *dev) dev->num_crtcs = 0; } +EXPORT_SYMBOL(drm_vblank_cleanup); int drm_vblank_init(struct drm_device *dev, int num_crtcs) { @@ -163,7 +164,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs) } dev->vblank_disable_allowed = 0; - return 0; err: @@ -493,6 +493,9 @@ EXPORT_SYMBOL(drm_vblank_off); */ void drm_vblank_pre_modeset(struct drm_device *dev, int crtc) { + /* vblank is not initialized (IRQ not installed ?) */ + if (!dev->num_crtcs) + return; /* * To avoid all the problems that might happen if interrupts * were enabled/disabled around or between these calls, we just From 003e69f9862bcda89a75c27750efdbc17ac02945 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 7 Jan 2010 15:39:14 +0100 Subject: [PATCH 0506/1626] drm/radeon/kms: Don't try to enable IRQ if we have no handler installed If for any reason we haven't installed handler we shouldn't try to enable IRQ/MSI on the hw so we don't get unhandled IRQ/MSI which makes the kernel sad. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 8 +++++++- drivers/gpu/drm/radeon/r600.c | 7 ++++++- drivers/gpu/drm/radeon/radeon_irq_kms.c | 10 ++++++++-- drivers/gpu/drm/radeon/rs600.c | 8 +++++++- 4 files changed, 28 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index d2b789e67c39..8760d66e058a 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -131,7 +131,8 @@ void r100_hpd_init(struct radeon_device *rdev) break; } } - r100_irq_set(rdev); + if (rdev->irq.installed) + r100_irq_set(rdev); } void r100_hpd_fini(struct radeon_device *rdev) @@ -243,6 +244,11 @@ int r100_irq_set(struct radeon_device *rdev) { uint32_t tmp = 0; + if (!rdev->irq.installed) { + WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n"); + WREG32(R_000040_GEN_INT_CNTL, 0); + return -EINVAL; + } if (rdev->irq.sw_int) { tmp |= RADEON_SW_INT_ENABLE; } diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 0c065f425c84..1f4f83d6fbe6 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -285,7 +285,8 @@ void r600_hpd_init(struct radeon_device *rdev) } } } - r600_irq_set(rdev); + if (rdev->irq.installed) + r600_irq_set(rdev); } void r600_hpd_fini(struct radeon_device *rdev) @@ -2461,6 +2462,10 @@ int r600_irq_set(struct radeon_device *rdev) u32 mode_int = 0; u32 hpd1, hpd2, hpd3, hpd4 = 0, hpd5 = 0, hpd6 = 0; + if (!rdev->irq.installed) { + WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n"); + return -EINVAL; + } /* don't enable anything if the ih is disabled */ if (!rdev->ih.enabled) return 0; diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c index 9223296fe37b..3cfd60fd0083 100644 --- a/drivers/gpu/drm/radeon/radeon_irq_kms.c +++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c @@ -97,6 +97,7 @@ void radeon_driver_irq_uninstall_kms(struct drm_device *dev) rdev->irq.sw_int = false; for (i = 0; i < 2; i++) { rdev->irq.crtc_vblank_int[i] = false; + rdev->irq.hpd[i] = false; } radeon_irq_set(rdev); } @@ -128,17 +129,22 @@ int radeon_irq_kms_init(struct radeon_device *rdev) DRM_INFO("radeon: using MSI.\n"); } } - drm_irq_install(rdev->ddev); rdev->irq.installed = true; + r = drm_irq_install(rdev->ddev); + if (r) { + rdev->irq.installed = false; + return r; + } DRM_INFO("radeon: irq initialized.\n"); return 0; } void radeon_irq_kms_fini(struct radeon_device *rdev) { + drm_vblank_cleanup(rdev->ddev); if (rdev->irq.installed) { - rdev->irq.installed = false; drm_irq_uninstall(rdev->ddev); + rdev->irq.installed = false; if (rdev->msi_enabled) pci_disable_msi(rdev->pdev); } diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index a0378c57e4ec..d5255751e7b3 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -135,7 +135,8 @@ void rs600_hpd_init(struct radeon_device *rdev) break; } } - rs600_irq_set(rdev); + if (rdev->irq.installed) + rs600_irq_set(rdev); } void rs600_hpd_fini(struct radeon_device *rdev) @@ -316,6 +317,11 @@ int rs600_irq_set(struct radeon_device *rdev) u32 hpd2 = RREG32(R_007D18_DC_HOT_PLUG_DETECT2_INT_CONTROL) & ~S_007D18_DC_HOT_PLUG_DETECT2_INT_EN(1); + if (!rdev->irq.installed) { + WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n"); + WREG32(R_000040_GEN_INT_CNTL, 0); + return -EINVAL; + } if (rdev->irq.sw_int) { tmp |= S_000040_SW_INT_EN(1); } From 992dc9ae61f86db3b8ef9f8d6b7df898c90e8c08 Mon Sep 17 00:00:00 2001 From: David John Date: Thu, 31 Dec 2009 12:00:46 +0530 Subject: [PATCH 0507/1626] drm: Keep disabled outputs disabled after suspend / resume With the current DRM code, an output that has been powered off from userspace will automatically power back on when resuming from suspend. This patch fixes this behaviour. Tested only with the Intel i915 driver on an Intel GM45 Express chipset. Signed-off-by: David John Reviewed-by: Jesse Barnes Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 4231d6db72ec..aba79c494587 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -216,7 +216,7 @@ bool drm_helper_crtc_in_use(struct drm_crtc *crtc) EXPORT_SYMBOL(drm_helper_crtc_in_use); /** - * drm_disable_unused_functions - disable unused objects + * drm_helper_disable_unused_functions - disable unused objects * @dev: DRM device * * LOCKING: @@ -1162,6 +1162,9 @@ EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct); int drm_helper_resume_force_mode(struct drm_device *dev) { struct drm_crtc *crtc; + struct drm_encoder *encoder; + struct drm_encoder_helper_funcs *encoder_funcs; + struct drm_crtc_helper_funcs *crtc_funcs; int ret; list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { @@ -1174,6 +1177,25 @@ int drm_helper_resume_force_mode(struct drm_device *dev) if (ret == false) DRM_ERROR("failed to set mode on crtc %p\n", crtc); + + /* Turn off outputs that were already powered off */ + if (drm_helper_choose_crtc_dpms(crtc)) { + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + + if(encoder->crtc != crtc) + continue; + + encoder_funcs = encoder->helper_private; + if (encoder_funcs->dpms) + (*encoder_funcs->dpms) (encoder, + drm_helper_choose_encoder_dpms(encoder)); + + crtc_funcs = crtc->helper_private; + if (crtc_funcs->dpms) + (*crtc_funcs->dpms) (crtc, + drm_helper_choose_crtc_dpms(crtc)); + } + } } /* disable the unused connectors while restoring the modesetting */ drm_helper_disable_unused_functions(dev); From 7751b8cb754f1bc48b20c1145d43c7651d4951fd Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 8 Jan 2010 09:27:08 +1000 Subject: [PATCH 0508/1626] drm/kms/fb: check for depth changes from userspace for resizing. If userspace (plymouth in this case) asks for a deeper depth, refuse it as well due to lack of resizing. This fixes an issue since < 32MB cards went to 8bpp and plymouth crashes on startup. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 100ee48760b7..1c2b7d44ec05 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -606,11 +606,10 @@ int drm_fb_helper_check_var(struct fb_var_screeninfo *var, return -EINVAL; /* Need to resize the fb object !!! */ - if (var->xres > fb->width || var->yres > fb->height) { - DRM_ERROR("Requested width/height is greater than current fb " - "object %dx%d > %dx%d\n", var->xres, var->yres, - fb->width, fb->height); - DRM_ERROR("Need resizing code.\n"); + if (var->bits_per_pixel > fb->bits_per_pixel || var->xres > fb->width || var->yres > fb->height) { + DRM_DEBUG("fb userspace requested width/height/bpp is greater than current fb " + "object %dx%d-%d > %dx%d-%d\n", var->xres, var->yres, var->bits_per_pixel, + fb->width, fb->height, fb->bits_per_pixel); return -EINVAL; } From 704da560c0a0120d8869187f511491a00951a1d3 Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Fri, 8 Jan 2010 00:00:09 -0800 Subject: [PATCH 0509/1626] tcp: update the netstamp_needed counter when cloning sockets This fixes a netstamp_needed accounting issue when the listen socket has SO_TIMESTAMP set: s = socket(AF_INET, SOCK_STREAM, 0); setsockopt(s, SOL_SOCKET, SO_TIMESTAMP, 1); -> netstamp_needed = 1 bind(s, ...); listen(s, ...); s2 = accept(s, ...); -> netstamp_needed = 1 close(s2); -> netstamp_needed = 0 close(s); -> netstamp_needed = -1 Signed-off-by: Octavian Purdila Signed-off-by: David S. Miller --- net/core/sock.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/core/sock.c b/net/core/sock.c index 76ff58d43e26..e1f6f225f012 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1205,6 +1205,10 @@ struct sock *sk_clone(const struct sock *sk, const gfp_t priority) if (newsk->sk_prot->sockets_allocated) percpu_counter_inc(newsk->sk_prot->sockets_allocated); + + if (sock_flag(newsk, SOCK_TIMESTAMP) || + sock_flag(newsk, SOCK_TIMESTAMPING_RX_SOFTWARE)) + net_enable_timestamp(); } out: return newsk; From 76704fb56c7317ae02c3267fc31d215f3a2528ca Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 8 Jan 2010 00:03:26 -0800 Subject: [PATCH 0510/1626] SPARC: use helpers for rlimits Make sure compiler won't do weird things with limits. E.g. fetching them twice may return 2 different values after writable limits are implemented. I.e. either use rlimit helpers added in 3e10e716abf3c71bdb5d86b8f507f9e72236c9cd or ACCESS_ONCE if not applicable. Signed-off-by: Jiri Slaby Signed-off-by: David S. Miller --- arch/sparc/kernel/sys_sparc_64.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index cfa0e19abe3b..d77f54316948 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -365,6 +365,7 @@ EXPORT_SYMBOL(get_fb_unmapped_area); void arch_pick_mmap_layout(struct mm_struct *mm) { unsigned long random_factor = 0UL; + unsigned long gap; if (current->flags & PF_RANDOMIZE) { random_factor = get_random_int(); @@ -379,9 +380,10 @@ void arch_pick_mmap_layout(struct mm_struct *mm) * Fall back to the standard layout if the personality * bit is set, or if the expected stack growth is unlimited: */ + gap = rlimit(RLIMIT_STACK); if (!test_thread_flag(TIF_32BIT) || (current->personality & ADDR_COMPAT_LAYOUT) || - current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY || + gap == RLIM_INFINITY || sysctl_legacy_va_layout) { mm->mmap_base = TASK_UNMAPPED_BASE + random_factor; mm->get_unmapped_area = arch_get_unmapped_area; @@ -389,9 +391,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm) } else { /* We know it's 32-bit */ unsigned long task_size = STACK_TOP32; - unsigned long gap; - gap = current->signal->rlim[RLIMIT_STACK].rlim_cur; if (gap < 128 * 1024 * 1024) gap = 128 * 1024 * 1024; if (gap > (task_size / 6 * 5)) From 444c1953d496d272208902ff7010dc70d1f887f0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 3 Jan 2010 12:39:27 +0100 Subject: [PATCH 0511/1626] sound: oss: off by one bug The problem is that in the original code sound_nblocks could go up to 1024 which would be an array overflow. This was found with a static checker and has been compile tested only. Signed-off-by: Dan Carpenter Signed-off-by: Jaroslav Kysela --- sound/oss/dev_table.c | 16 +++++++++------- sound/oss/sound_config.h | 2 ++ sound/oss/soundcard.c | 4 ++-- 3 files changed, 13 insertions(+), 9 deletions(-) diff --git a/sound/oss/dev_table.c b/sound/oss/dev_table.c index 08274c995d06..727bdb9ba2dc 100644 --- a/sound/oss/dev_table.c +++ b/sound/oss/dev_table.c @@ -67,14 +67,15 @@ int sound_install_audiodrv(int vers, char *name, struct audio_driver *driver, return -(EBUSY); } d = (struct audio_driver *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct audio_driver))); - - if (sound_nblocks < 1024) - sound_nblocks++; + sound_nblocks++; + if (sound_nblocks >= MAX_MEM_BLOCKS) + sound_nblocks = MAX_MEM_BLOCKS - 1; op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct audio_operations))); + sound_nblocks++; + if (sound_nblocks >= MAX_MEM_BLOCKS) + sound_nblocks = MAX_MEM_BLOCKS - 1; - if (sound_nblocks < 1024) - sound_nblocks++; if (d == NULL || op == NULL) { printk(KERN_ERR "Sound: Can't allocate driver for (%s)\n", name); sound_unload_audiodev(num); @@ -128,9 +129,10 @@ int sound_install_mixer(int vers, char *name, struct mixer_operations *driver, until you unload sound! */ op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct mixer_operations))); + sound_nblocks++; + if (sound_nblocks >= MAX_MEM_BLOCKS) + sound_nblocks = MAX_MEM_BLOCKS - 1; - if (sound_nblocks < 1024) - sound_nblocks++; if (op == NULL) { printk(KERN_ERR "Sound: Can't allocate mixer driver for (%s)\n", name); return -ENOMEM; diff --git a/sound/oss/sound_config.h b/sound/oss/sound_config.h index 55271fbe7f49..9d35c4c65b9b 100644 --- a/sound/oss/sound_config.h +++ b/sound/oss/sound_config.h @@ -142,4 +142,6 @@ static inline int translate_mode(struct file *file) #define TIMER_ARMED 121234 #define TIMER_NOT_ARMED 1 +#define MAX_MEM_BLOCKS 1024 + #endif diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c index 61aaedae6b7e..c62530943888 100644 --- a/sound/oss/soundcard.c +++ b/sound/oss/soundcard.c @@ -56,7 +56,7 @@ /* * Table for permanently allocated memory (used when unloading the module) */ -void * sound_mem_blocks[1024]; +void * sound_mem_blocks[MAX_MEM_BLOCKS]; int sound_nblocks = 0; /* Persistent DMA buffers */ @@ -574,7 +574,7 @@ static int __init oss_init(void) NULL, "%s%d", dev_list[i].name, j); } - if (sound_nblocks >= 1024) + if (sound_nblocks >= MAX_MEM_BLOCKS - 1) printk(KERN_ERR "Sound warning: Deallocation table was too small.\n"); return 0; From edf12b4af6e1d2b7c42c75ff00e55a9c52c06d70 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Mon, 4 Jan 2010 22:23:34 +0100 Subject: [PATCH 0512/1626] sbawe: fix memory detection part 2 The patch "sbawe: fix memory detection" fixed detection for memoryless SB32 cards but broke detection of memory above 512KB. This patch fixes the regression. The patch has been tested on the SB32 card (CT3670) with 0MB, 2MB and 8MB memory installed. Signed-off-by: Krzysztof Helt Signed-off-by: Jaroslav Kysela --- sound/isa/sb/emu8000.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/sound/isa/sb/emu8000.c b/sound/isa/sb/emu8000.c index 751762f1c59a..0c40951b6523 100644 --- a/sound/isa/sb/emu8000.c +++ b/sound/isa/sb/emu8000.c @@ -377,12 +377,13 @@ init_arrays(struct snd_emu8000 *emu) static void __devinit size_dram(struct snd_emu8000 *emu) { - int i, size; + int i, size, detected_size; if (emu->dram_checked) return; size = 0; + detected_size = 0; /* write out a magic number */ snd_emu8000_dma_chan(emu, 0, EMU8000_RAM_WRITE); @@ -393,6 +394,8 @@ size_dram(struct snd_emu8000 *emu) while (size < EMU8000_MAX_DRAM) { + size += 512 * 1024; /* increment 512kbytes */ + /* Write a unique data on the test address. * if the address is out of range, the data is written on * 0x200000(=EMU8000_DRAM_OFFSET). Then the id word is @@ -414,7 +417,7 @@ size_dram(struct snd_emu8000 *emu) if (EMU8000_SMLD_READ(emu) != UNIQUE_ID2) break; /* no memory at this address */ - size += 512 * 1024; /* increment 512kbytes */ + detected_size = size; snd_emu8000_read_wait(emu); @@ -442,9 +445,9 @@ size_dram(struct snd_emu8000 *emu) snd_emu8000_dma_chan(emu, 1, EMU8000_RAM_CLOSE); snd_printdd("EMU8000 [0x%lx]: %d Kb on-board memory detected\n", - emu->port1, size/1024); + emu->port1, detected_size/1024); - emu->mem_size = size; + emu->mem_size = detected_size; emu->dram_checked = 1; } From 011f4ea09768fdf6f95e3781cba2ed681a2ac710 Mon Sep 17 00:00:00 2001 From: Amit Kumar Salecha Date: Thu, 7 Jan 2010 22:10:14 +0000 Subject: [PATCH 0513/1626] netxen: fix tx ring memory leak o While unloading driver or resetting the context, tx ring was not getting free. Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_init.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 02f8d4b4db63..925b69958da5 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -184,6 +184,8 @@ skip_rds: tx_ring = adapter->tx_ring; vfree(tx_ring->cmd_buf_arr); + kfree(tx_ring); + adapter->tx_ring = NULL; } int netxen_alloc_sw_resources(struct netxen_adapter *adapter) From 581e8ae49ea3a70b438991e388ded2dcbdbd2162 Mon Sep 17 00:00:00 2001 From: Amit Kumar Salecha Date: Thu, 7 Jan 2010 22:10:15 +0000 Subject: [PATCH 0514/1626] netxen: fix smatch warning o Fix pointless assignments Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_hw.c | 3 +-- drivers/net/netxen/netxen_nic_init.c | 2 +- drivers/net/netxen/netxen_nic_main.c | 2 +- 3 files changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 2e364fee3cbb..398dfd46b8c1 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -345,8 +345,7 @@ netxen_pcie_sem_lock(struct netxen_adapter *adapter, int sem, u32 id_reg) void netxen_pcie_sem_unlock(struct netxen_adapter *adapter, int sem) { - int val; - val = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM_UNLOCK(sem))); + NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM_UNLOCK(sem))); } int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port) diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 925b69958da5..64cff68d372c 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -784,7 +784,7 @@ netxen_need_fw_reset(struct netxen_adapter *adapter) if (NXRD32(adapter, CRB_CMDPEG_STATE) == PHAN_INITIALIZE_FAILED) return 1; - old_count = count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER); + old_count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER); for (i = 0; i < 10; i++) { diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 880fcd0663e6..9f9d6081959b 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -340,7 +340,7 @@ netxen_check_hw_init(struct netxen_adapter *adapter, int first_boot) if (!(first_boot & 0x4)) { first_boot |= 0x4; NXWR32(adapter, NETXEN_PCIE_REG(0x4), first_boot); - first_boot = NXRD32(adapter, NETXEN_PCIE_REG(0x4)); + NXRD32(adapter, NETXEN_PCIE_REG(0x4)); } /* This is the first boot after power up */ From d49c9640975355c79f346869831bf9780d185de0 Mon Sep 17 00:00:00 2001 From: Amit Kumar Salecha Date: Thu, 7 Jan 2010 22:10:16 +0000 Subject: [PATCH 0515/1626] netxen: fix set mac addr o If tx and rx resources are not available, during set mac request. Then this request wont be passed to firmware and it will be added to driver mac list and will never make it to firmware. So if resources are not available, don't add it to driver mac list. Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_hw.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 398dfd46b8c1..85e28e60ecf1 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -690,6 +690,9 @@ void netxen_p3_nic_set_multi(struct net_device *netdev) struct list_head *head; nx_mac_list_t *cur; + if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) + return; + list_splice_tail_init(&adapter->mac_list, &del_list); nx_p3_nic_add_mac(adapter, adapter->mac_addr, &del_list); From c651a8c160647b2eb6e61fb485f307e3781415e8 Mon Sep 17 00:00:00 2001 From: Amit Kumar Salecha Date: Thu, 7 Jan 2010 22:10:17 +0000 Subject: [PATCH 0516/1626] netxen: update version to 4.0.72 Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index 76cd1f3e9fc8..9bc5bd1d538a 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -53,8 +53,8 @@ #define _NETXEN_NIC_LINUX_MAJOR 4 #define _NETXEN_NIC_LINUX_MINOR 0 -#define _NETXEN_NIC_LINUX_SUBVERSION 65 -#define NETXEN_NIC_LINUX_VERSIONID "4.0.65" +#define _NETXEN_NIC_LINUX_SUBVERSION 72 +#define NETXEN_NIC_LINUX_VERSIONID "4.0.72" #define NETXEN_VERSION_CODE(a, b, c) (((a) << 24) + ((b) << 16) + (c)) #define _major(v) (((v) >> 24) & 0xff) From 28b8f04a5256ca5ec0781b06ee9353c37c650980 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 7 Jan 2010 16:30:56 +0000 Subject: [PATCH 0517/1626] e1000e: call pci_save_state() after pci_restore_state() Due to a change in pci_restore_state()[1] which clears the saved_state flag, the driver should call pci_save_state() to set the flag once again to avoid issues with EEH (same fix that recently was submitted for ixgbe). [1] commmit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 762b697ce731..10aa0ec719df 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4674,6 +4674,7 @@ static int e1000_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); + pci_save_state(pdev); e1000e_disable_l1aspm(pdev); err = pci_enable_device_mem(pdev); @@ -4825,6 +4826,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) } else { pci_set_master(pdev); pci_restore_state(pdev); + pci_save_state(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); pci_enable_wake(pdev, PCI_D3cold, 0); From 29477e249f5a28444c556bbb816f3af2b6f84412 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 7 Jan 2010 16:31:16 +0000 Subject: [PATCH 0518/1626] e1000e: don't accumulate PHY statistics on PHY read failure Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 10aa0ec719df..c45965a256b6 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -3315,24 +3315,24 @@ void e1000e_update_stats(struct e1000_adapter *adapter) if ((hw->phy.type == e1000_phy_82578) || (hw->phy.type == e1000_phy_82577)) { e1e_rphy(hw, HV_SCC_UPPER, &phy_data); - e1e_rphy(hw, HV_SCC_LOWER, &phy_data); - adapter->stats.scc += phy_data; + if (!e1e_rphy(hw, HV_SCC_LOWER, &phy_data)) + adapter->stats.scc += phy_data; e1e_rphy(hw, HV_ECOL_UPPER, &phy_data); - e1e_rphy(hw, HV_ECOL_LOWER, &phy_data); - adapter->stats.ecol += phy_data; + if (!e1e_rphy(hw, HV_ECOL_LOWER, &phy_data)) + adapter->stats.ecol += phy_data; e1e_rphy(hw, HV_MCC_UPPER, &phy_data); - e1e_rphy(hw, HV_MCC_LOWER, &phy_data); - adapter->stats.mcc += phy_data; + if (!e1e_rphy(hw, HV_MCC_LOWER, &phy_data)) + adapter->stats.mcc += phy_data; e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data); - e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data); - adapter->stats.latecol += phy_data; + if (!e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data)) + adapter->stats.latecol += phy_data; e1e_rphy(hw, HV_DC_UPPER, &phy_data); - e1e_rphy(hw, HV_DC_LOWER, &phy_data); - adapter->stats.dc += phy_data; + if (!e1e_rphy(hw, HV_DC_LOWER, &phy_data)) + adapter->stats.dc += phy_data; } else { adapter->stats.scc += er32(SCC); adapter->stats.ecol += er32(ECOL); @@ -3360,8 +3360,8 @@ void e1000e_update_stats(struct e1000_adapter *adapter) if ((hw->phy.type == e1000_phy_82578) || (hw->phy.type == e1000_phy_82577)) { e1e_rphy(hw, HV_COLC_UPPER, &phy_data); - e1e_rphy(hw, HV_COLC_LOWER, &phy_data); - hw->mac.collision_delta = phy_data; + if (!e1e_rphy(hw, HV_COLC_LOWER, &phy_data)) + hw->mac.collision_delta = phy_data; } else { hw->mac.collision_delta = er32(COLC); } @@ -3372,8 +3372,8 @@ void e1000e_update_stats(struct e1000_adapter *adapter) if ((hw->phy.type == e1000_phy_82578) || (hw->phy.type == e1000_phy_82577)) { e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data); - e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data); - adapter->stats.tncrs += phy_data; + if (!e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data)) + adapter->stats.tncrs += phy_data; } else { if ((hw->mac.type != e1000_82574) && (hw->mac.type != e1000_82583)) From f464ba87fe7f346e270239354eb0d38f7a3b3e6b Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 7 Jan 2010 16:31:35 +0000 Subject: [PATCH 0519/1626] e1000e: perform 10/100 adaptive IFS only on parts that support it Adaptive IFS which involves writing to the Adaptive IFS Throttle register was being done for all devices supported by the driver even though it is not supported (i.e. the register doesn't even exist) on some devices. The feature is supported on 8257x/82583 and ICH/PCH based devices, but not on ESB2. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/82571.c | 2 ++ drivers/net/e1000e/es2lan.c | 2 ++ drivers/net/e1000e/hw.h | 1 + drivers/net/e1000e/ich8lan.c | 2 ++ drivers/net/e1000e/lib.c | 14 ++++++++++++++ 5 files changed, 21 insertions(+) diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index b979464091bb..02d67d047d96 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -237,6 +237,8 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) /* Set if manageability features are enabled. */ mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? true : false; + /* Adaptive IFS supported */ + mac->adaptive_ifs = true; /* check for link */ switch (hw->phy.media_type) { diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index 3028f23da891..e2aa3b788564 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -224,6 +224,8 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter) /* Set if manageability features are enabled. */ mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? true : false; + /* Adaptive IFS not supported */ + mac->adaptive_ifs = false; /* check for link */ switch (hw->phy.media_type) { diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 2784cf44a6f3..eccf29b75c41 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -818,6 +818,7 @@ struct e1000_mac_info { u8 forced_speed_duplex; + bool adaptive_ifs; bool arc_subsystem_valid; bool autoneg; bool autoneg_failed; diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 9b09246af064..ad08cf3f40c0 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -454,6 +454,8 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter) mac->rar_entry_count--; /* Set if manageability features are enabled. */ mac->arc_subsystem_valid = true; + /* Adaptive IFS supported */ + mac->adaptive_ifs = true; /* LED operations */ switch (mac->type) { diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index a86c17548c1e..56b59e4a6871 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -1609,6 +1609,11 @@ void e1000e_reset_adaptive(struct e1000_hw *hw) { struct e1000_mac_info *mac = &hw->mac; + if (!mac->adaptive_ifs) { + e_dbg("Not in Adaptive IFS mode!\n"); + goto out; + } + mac->current_ifs_val = 0; mac->ifs_min_val = IFS_MIN; mac->ifs_max_val = IFS_MAX; @@ -1617,6 +1622,8 @@ void e1000e_reset_adaptive(struct e1000_hw *hw) mac->in_ifs_mode = false; ew32(AIT, 0); +out: + return; } /** @@ -1630,6 +1637,11 @@ void e1000e_update_adaptive(struct e1000_hw *hw) { struct e1000_mac_info *mac = &hw->mac; + if (!mac->adaptive_ifs) { + e_dbg("Not in Adaptive IFS mode!\n"); + goto out; + } + if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) { if (mac->tx_packet_delta > MIN_NUM_XMITS) { mac->in_ifs_mode = true; @@ -1650,6 +1662,8 @@ void e1000e_update_adaptive(struct e1000_hw *hw) ew32(AIT, 0); } } +out: + return; } /** From ca777f9c098f1ea1c9ec61318cc909d0c8f465e1 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 7 Jan 2010 16:31:54 +0000 Subject: [PATCH 0520/1626] e1000e: e1000e_enable_tx_pkt_filtering() returns wrong value e1000e_enable_tx_pkt_filtering() will return a non-zero value if the driver fails to enable the manageability interface on the host for any reason; instead it should retun zero to indicate filtering has been disabled. Also provide a single exit point for the function. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/lib.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 56b59e4a6871..97649bf53b05 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -2301,10 +2301,12 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) s32 ret_val, hdr_csum, csum; u8 i, len; + hw->mac.tx_pkt_filtering = true; + /* No manageability, no filtering */ if (!e1000e_check_mng_mode(hw)) { hw->mac.tx_pkt_filtering = false; - return 0; + goto out; } /* @@ -2312,9 +2314,9 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) * reason, disable filtering. */ ret_val = e1000_mng_enable_host_if(hw); - if (ret_val != 0) { + if (ret_val) { hw->mac.tx_pkt_filtering = false; - return ret_val; + goto out; } /* Read in the header. Length and offset are in dwords. */ @@ -2333,17 +2335,17 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) */ if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) { hw->mac.tx_pkt_filtering = true; - return 1; + goto out; } /* Cookie area is valid, make the final check for filtering. */ if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) { hw->mac.tx_pkt_filtering = false; - return 0; + goto out; } - hw->mac.tx_pkt_filtering = true; - return 1; +out: + return hw->mac.tx_pkt_filtering; } /** From b7a9216c5a3205a6d721972bfd012c4eb5950e9c Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 7 Jan 2010 16:32:13 +0000 Subject: [PATCH 0521/1626] e1000e: fix and commonize code for setting the receive address registers Fix e1000e_rar_set() to flush consecutive register writes to avoid write combining which some parts cannot handle. Update e1000e_init_rx_addrs() to call the fixed e1000e_rar_set() instead of duplicating code. Also change e1000e_rar_set() to _not_ set the Address Valid bit if the MAC address is all zeros. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/lib.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 97649bf53b05..2fa9b36a2c5a 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -125,6 +125,7 @@ void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value) void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) { u32 i; + u8 mac_addr[ETH_ALEN] = {0}; /* Setup the receive address */ e_dbg("Programming MAC Address into RAR[0]\n"); @@ -133,12 +134,8 @@ void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) /* Zero out the other (rar_entry_count - 1) receive addresses */ e_dbg("Clearing RAR[1-%u]\n", rar_count-1); - for (i = 1; i < rar_count; i++) { - E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1), 0); - e1e_flush(); - E1000_WRITE_REG_ARRAY(hw, E1000_RA, ((i << 1) + 1), 0); - e1e_flush(); - } + for (i = 1; i < rar_count; i++) + e1000e_rar_set(hw, mac_addr, i); } /** @@ -164,10 +161,19 @@ void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); - rar_high |= E1000_RAH_AV; + /* If MAC address zero, no need to set the AV bit */ + if (rar_low || rar_high) + rar_high |= E1000_RAH_AV; - E1000_WRITE_REG_ARRAY(hw, E1000_RA, (index << 1), rar_low); - E1000_WRITE_REG_ARRAY(hw, E1000_RA, ((index << 1) + 1), rar_high); + /* + * Some bridges will combine consecutive 32-bit writes into + * a single burst write, which will malfunction on some parts. + * The flushes avoid this. + */ + ew32(RAL(index), rar_low); + e1e_flush(); + ew32(RAH(index), rar_high); + e1e_flush(); } /** From 397bb3c2e0810d56518e5e111fcedb593823514f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Dec 2009 13:37:31 +0200 Subject: [PATCH 0522/1626] OMAP: DSS2: DSI: fix VC channels in send_short and send_null - dsi_vc_send_short() needs to use dest_per for the peripheral id - dsi_vc_send_null() was always using channel id 0 Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 5936487b5def..341c6bb2650b 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -1999,7 +1999,7 @@ static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc) return -EINVAL; } - data_id = data_type | channel << 6; + data_id = data_type | dsi.vc[channel].dest_per << 6; r = (data_id << 0) | (data << 8) | (ecc << 24); @@ -2011,7 +2011,7 @@ static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc) int dsi_vc_send_null(int channel) { u8 nullpkg[] = {0, 0, 0, 0}; - return dsi_vc_send_long(0, DSI_DT_NULL_PACKET, nullpkg, 4, 0); + return dsi_vc_send_long(channel, DSI_DT_NULL_PACKET, nullpkg, 4, 0); } EXPORT_SYMBOL(dsi_vc_send_null); From ff90a3488d98a63bf24bff37f77a9a37b00e7a54 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Dec 2009 13:38:04 +0200 Subject: [PATCH 0523/1626] OMAP: DSS2: DSI: print debug DCS cmd in hex Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 341c6bb2650b..e65056317a28 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -2058,7 +2058,7 @@ int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) int r; if (dsi.debug_read) - DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %u)\n", channel, dcs_cmd); + DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %x)\n", channel, dcs_cmd); r = dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0); if (r) From dfc0fd8d8850ef11951ba6c251e06096d1b5a0bd Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 17 Dec 2009 14:35:21 +0200 Subject: [PATCH 0524/1626] OMAP: DSS2: Collect interrupt statistics Collect interrupt statistics, printable via debugfs: debugfs/omapdss/dispc_irq debugfs/omapdss/dsi_irq The counters are reset when printed. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/Kconfig | 7 ++ drivers/video/omap2/dss/core.c | 8 ++ drivers/video/omap2/dss/dispc.c | 67 +++++++++++++++++ drivers/video/omap2/dss/dsi.c | 125 ++++++++++++++++++++++++++++++++ drivers/video/omap2/dss/dss.h | 14 ++++ 5 files changed, 221 insertions(+) diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig index 71d8dec30635..c63ce767b277 100644 --- a/drivers/video/omap2/dss/Kconfig +++ b/drivers/video/omap2/dss/Kconfig @@ -25,6 +25,13 @@ config OMAP2_DSS_DEBUG_SUPPORT This enables debug messages. You need to enable printing with 'debug' module parameter. +config OMAP2_DSS_COLLECT_IRQ_STATS + bool "Collect DSS IRQ statistics" + depends on OMAP2_DSS_DEBUG_SUPPORT + default n + help + Collect DSS IRQ statistics, printable via debugfs + config OMAP2_DSS_RFBI bool "RFBI support" default n diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c index 29497a0c9a91..dbb0ce243f0c 100644 --- a/drivers/video/omap2/dss/core.c +++ b/drivers/video/omap2/dss/core.c @@ -395,6 +395,14 @@ static int dss_initialize_debugfs(void) debugfs_create_file("clk", S_IRUGO, dss_debugfs_dir, &dss_debug_dump_clocks, &dss_debug_fops); + debugfs_create_file("dispc_irq", S_IRUGO, dss_debugfs_dir, + &dispc_dump_irqs, &dss_debug_fops); + +#ifdef CONFIG_OMAP2_DSS_DSI + debugfs_create_file("dsi_irq", S_IRUGO, dss_debugfs_dir, + &dsi_dump_irqs, &dss_debug_fops); +#endif + debugfs_create_file("dss", S_IRUGO, dss_debugfs_dir, &dss_dump_regs, &dss_debug_fops); debugfs_create_file("dispc", S_IRUGO, dss_debugfs_dir, diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index 6dabf4b2f005..e2e0f9ae7353 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -148,6 +148,12 @@ static const struct dispc_reg dispc_reg_att[] = { DISPC_GFX_ATTRIBUTES, DISPC_VID_ATTRIBUTES(0), DISPC_VID_ATTRIBUTES(1) }; +struct dispc_irq_stats { + unsigned long last_reset; + unsigned irq_count; + unsigned irqs[32]; +}; + static struct { void __iomem *base; @@ -160,6 +166,11 @@ static struct { struct work_struct error_work; u32 ctx[DISPC_SZ_REGS / sizeof(u32)]; + +#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS + spinlock_t irq_stats_lock; + struct dispc_irq_stats irq_stats; +#endif } dispc; static void _omap_dispc_set_irqs(void); @@ -2247,6 +2258,50 @@ void dispc_dump_clocks(struct seq_file *s) enable_clocks(0); } +#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS +void dispc_dump_irqs(struct seq_file *s) +{ + unsigned long flags; + struct dispc_irq_stats stats; + + spin_lock_irqsave(&dispc.irq_stats_lock, flags); + + stats = dispc.irq_stats; + memset(&dispc.irq_stats, 0, sizeof(dispc.irq_stats)); + dispc.irq_stats.last_reset = jiffies; + + spin_unlock_irqrestore(&dispc.irq_stats_lock, flags); + + seq_printf(s, "period %u ms\n", + jiffies_to_msecs(jiffies - stats.last_reset)); + + seq_printf(s, "irqs %d\n", stats.irq_count); +#define PIS(x) \ + seq_printf(s, "%-20s %10d\n", #x, stats.irqs[ffs(DISPC_IRQ_##x)-1]); + + PIS(FRAMEDONE); + PIS(VSYNC); + PIS(EVSYNC_EVEN); + PIS(EVSYNC_ODD); + PIS(ACBIAS_COUNT_STAT); + PIS(PROG_LINE_NUM); + PIS(GFX_FIFO_UNDERFLOW); + PIS(GFX_END_WIN); + PIS(PAL_GAMMA_MASK); + PIS(OCP_ERR); + PIS(VID1_FIFO_UNDERFLOW); + PIS(VID1_END_WIN); + PIS(VID2_FIFO_UNDERFLOW); + PIS(VID2_END_WIN); + PIS(SYNC_LOST); + PIS(SYNC_LOST_DIGIT); + PIS(WAKEUP); +#undef PIS +} +#else +void dispc_dump_irqs(struct seq_file *s) { } +#endif + void dispc_dump_regs(struct seq_file *s) { #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dispc_read_reg(r)) @@ -2665,6 +2720,13 @@ void dispc_irq_handler(void) irqstatus = dispc_read_reg(DISPC_IRQSTATUS); +#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS + spin_lock(&dispc.irq_stats_lock); + dispc.irq_stats.irq_count++; + dss_collect_irq_stats(irqstatus, dispc.irq_stats.irqs); + spin_unlock(&dispc.irq_stats_lock); +#endif + #ifdef DEBUG if (dss_debug) print_irq_status(irqstatus); @@ -3012,6 +3074,11 @@ int dispc_init(void) spin_lock_init(&dispc.irq_lock); +#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS + spin_lock_init(&dispc.irq_stats_lock); + dispc.irq_stats.last_reset = jiffies; +#endif + INIT_WORK(&dispc.error_work, dispc_error_worker); dispc.base = ioremap(DISPC_BASE, DISPC_SZ_REGS); diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index e65056317a28..03f85df70749 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -204,6 +204,14 @@ struct dsi_update_region { struct omap_dss_device *device; }; +struct dsi_irq_stats { + unsigned long last_reset; + unsigned irq_count; + unsigned dsi_irqs[32]; + unsigned vc_irqs[4][32]; + unsigned cio_irqs[32]; +}; + static struct { void __iomem *base; @@ -258,6 +266,11 @@ static struct #endif int debug_read; int debug_write; + +#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS + spinlock_t irq_stats_lock; + struct dsi_irq_stats irq_stats; +#endif } dsi; #ifdef DEBUG @@ -528,6 +541,12 @@ void dsi_irq_handler(void) irqstatus = dsi_read_reg(DSI_IRQSTATUS); +#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS + spin_lock(&dsi.irq_stats_lock); + dsi.irq_stats.irq_count++; + dss_collect_irq_stats(irqstatus, dsi.irq_stats.dsi_irqs); +#endif + if (irqstatus & DSI_IRQ_ERROR_MASK) { DSSERR("DSI error, irqstatus %x\n", irqstatus); print_irq_status(irqstatus); @@ -549,6 +568,10 @@ void dsi_irq_handler(void) vcstatus = dsi_read_reg(DSI_VC_IRQSTATUS(i)); +#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS + dss_collect_irq_stats(vcstatus, dsi.irq_stats.vc_irqs[i]); +#endif + if (vcstatus & DSI_VC_IRQ_BTA) complete(&dsi.bta_completion); @@ -568,6 +591,10 @@ void dsi_irq_handler(void) if (irqstatus & DSI_IRQ_COMPLEXIO_ERR) { ciostatus = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); +#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS + dss_collect_irq_stats(ciostatus, dsi.irq_stats.cio_irqs); +#endif + dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, ciostatus); /* flush posted write */ dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); @@ -579,6 +606,10 @@ void dsi_irq_handler(void) dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK); /* flush posted write */ dsi_read_reg(DSI_IRQSTATUS); + +#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS + spin_unlock(&dsi.irq_stats_lock); +#endif } @@ -1226,6 +1257,95 @@ void dsi_dump_clocks(struct seq_file *s) enable_clocks(0); } +#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS +void dsi_dump_irqs(struct seq_file *s) +{ + unsigned long flags; + struct dsi_irq_stats stats; + + spin_lock_irqsave(&dsi.irq_stats_lock, flags); + + stats = dsi.irq_stats; + memset(&dsi.irq_stats, 0, sizeof(dsi.irq_stats)); + dsi.irq_stats.last_reset = jiffies; + + spin_unlock_irqrestore(&dsi.irq_stats_lock, flags); + + seq_printf(s, "period %u ms\n", + jiffies_to_msecs(jiffies - stats.last_reset)); + + seq_printf(s, "irqs %d\n", stats.irq_count); +#define PIS(x) \ + seq_printf(s, "%-20s %10d\n", #x, stats.dsi_irqs[ffs(DSI_IRQ_##x)-1]); + + seq_printf(s, "-- DSI interrupts --\n"); + PIS(VC0); + PIS(VC1); + PIS(VC2); + PIS(VC3); + PIS(WAKEUP); + PIS(RESYNC); + PIS(PLL_LOCK); + PIS(PLL_UNLOCK); + PIS(PLL_RECALL); + PIS(COMPLEXIO_ERR); + PIS(HS_TX_TIMEOUT); + PIS(LP_RX_TIMEOUT); + PIS(TE_TRIGGER); + PIS(ACK_TRIGGER); + PIS(SYNC_LOST); + PIS(LDO_POWER_GOOD); + PIS(TA_TIMEOUT); +#undef PIS + +#define PIS(x) \ + seq_printf(s, "%-20s %10d %10d %10d %10d\n", #x, \ + stats.vc_irqs[0][ffs(DSI_VC_IRQ_##x)-1], \ + stats.vc_irqs[1][ffs(DSI_VC_IRQ_##x)-1], \ + stats.vc_irqs[2][ffs(DSI_VC_IRQ_##x)-1], \ + stats.vc_irqs[3][ffs(DSI_VC_IRQ_##x)-1]); + + seq_printf(s, "-- VC interrupts --\n"); + PIS(CS); + PIS(ECC_CORR); + PIS(PACKET_SENT); + PIS(FIFO_TX_OVF); + PIS(FIFO_RX_OVF); + PIS(BTA); + PIS(ECC_NO_CORR); + PIS(FIFO_TX_UDF); + PIS(PP_BUSY_CHANGE); +#undef PIS + +#define PIS(x) \ + seq_printf(s, "%-20s %10d\n", #x, \ + stats.cio_irqs[ffs(DSI_CIO_IRQ_##x)-1]); + + seq_printf(s, "-- CIO interrupts --\n"); + PIS(ERRSYNCESC1); + PIS(ERRSYNCESC2); + PIS(ERRSYNCESC3); + PIS(ERRESC1); + PIS(ERRESC2); + PIS(ERRESC3); + PIS(ERRCONTROL1); + PIS(ERRCONTROL2); + PIS(ERRCONTROL3); + PIS(STATEULPS1); + PIS(STATEULPS2); + PIS(STATEULPS3); + PIS(ERRCONTENTIONLP0_1); + PIS(ERRCONTENTIONLP1_1); + PIS(ERRCONTENTIONLP0_2); + PIS(ERRCONTENTIONLP1_2); + PIS(ERRCONTENTIONLP0_3); + PIS(ERRCONTENTIONLP1_3); + PIS(ULPSACTIVENOT_ALL0); + PIS(ULPSACTIVENOT_ALL1); +#undef PIS +} +#endif + void dsi_dump_regs(struct seq_file *s) { #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dsi_read_reg(r)) @@ -3637,6 +3757,11 @@ int dsi_init(struct platform_device *pdev) spin_lock_init(&dsi.errors_lock); dsi.errors = 0; +#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS + spin_lock_init(&dsi.irq_stats_lock); + dsi.irq_stats.last_reset = jiffies; +#endif + init_completion(&dsi.bta_completion); init_completion(&dsi.update_completion); diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index 8da5ac42151b..2bcb1245d6c2 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -240,6 +240,7 @@ int dsi_init(struct platform_device *pdev); void dsi_exit(void); void dsi_dump_clocks(struct seq_file *s); +void dsi_dump_irqs(struct seq_file *s); void dsi_dump_regs(struct seq_file *s); void dsi_save_context(void); @@ -268,6 +269,7 @@ int dpi_init_display(struct omap_dss_device *dssdev); int dispc_init(void); void dispc_exit(void); void dispc_dump_clocks(struct seq_file *s); +void dispc_dump_irqs(struct seq_file *s); void dispc_dump_regs(struct seq_file *s); void dispc_irq_handler(void); void dispc_fake_vsync_irq(void); @@ -367,4 +369,16 @@ void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t); unsigned long rfbi_get_max_tx_rate(void); int rfbi_init_display(struct omap_dss_device *display); + +#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS +static inline void dss_collect_irq_stats(u32 irqstatus, unsigned *irq_arr) +{ + int b; + for (b = 0; b < 32; ++b) { + if (irqstatus & (1 << b)) + irq_arr[b]++; + } +} +#endif + #endif From 7475e44246e8a7c435a7ed8fe1e94fc8898685d9 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 8 Dec 2009 17:30:24 +0200 Subject: [PATCH 0525/1626] OMAP: DSS2: Fix crash when panel doesn't define enable_te() DSI driver didn't check if the panel driver actually implements enable_te(). Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 03f85df70749..e32a53c0889f 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -2932,11 +2932,15 @@ static int dsi_set_update_mode(struct omap_dss_device *dssdev, static int dsi_set_te(struct omap_dss_device *dssdev, bool enable) { - int r; - r = dssdev->driver->enable_te(dssdev, enable); - /* XXX for some reason, DSI TE breaks if we don't wait here. - * Panel bug? Needs more studying */ - msleep(100); + int r = 0; + + if (dssdev->driver->enable_te) { + r = dssdev->driver->enable_te(dssdev, enable); + /* XXX for some reason, DSI TE breaks if we don't wait here. + * Panel bug? Needs more studying */ + msleep(100); + } + return r; } From 56aa616a03feca630d5afce647367a5d8cfc67b8 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Tue, 8 Dec 2009 10:25:33 +0000 Subject: [PATCH 0526/1626] GFS2: Ensure uptodate inode size when using O_APPEND The VFS reads the inode size during generic_file_aio_write() but with no locking around it. In order to get the expected result from O_APPEND opens, this patch updated the inode size before calling generic_file_aio_write() There is of course still a race here, in that there is nothing to prevent another node coming in and extending the file in the mean time. On the other hand, when used with file locking this will ensure that the expected results are obtained. Signed-off-by: Steven Whitehouse --- fs/gfs2/file.c | 38 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 36 insertions(+), 2 deletions(-) diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c index 4eb308aa3234..a6abbae8a278 100644 --- a/fs/gfs2/file.c +++ b/fs/gfs2/file.c @@ -569,6 +569,40 @@ static int gfs2_fsync(struct file *file, struct dentry *dentry, int datasync) return ret; } +/** + * gfs2_file_aio_write - Perform a write to a file + * @iocb: The io context + * @iov: The data to write + * @nr_segs: Number of @iov segments + * @pos: The file position + * + * We have to do a lock/unlock here to refresh the inode size for + * O_APPEND writes, otherwise we can land up writing at the wrong + * offset. There is still a race, but provided the app is using its + * own file locking, this will make O_APPEND work as expected. + * + */ + +static ssize_t gfs2_file_aio_write(struct kiocb *iocb, const struct iovec *iov, + unsigned long nr_segs, loff_t pos) +{ + struct file *file = iocb->ki_filp; + + if (file->f_flags & O_APPEND) { + struct dentry *dentry = file->f_dentry; + struct gfs2_inode *ip = GFS2_I(dentry->d_inode); + struct gfs2_holder gh; + int ret; + + ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, 0, &gh); + if (ret) + return ret; + gfs2_glock_dq_uninit(&gh); + } + + return generic_file_aio_write(iocb, iov, nr_segs, pos); +} + #ifdef CONFIG_GFS2_FS_LOCKING_DLM /** @@ -711,7 +745,7 @@ const struct file_operations gfs2_file_fops = { .read = do_sync_read, .aio_read = generic_file_aio_read, .write = do_sync_write, - .aio_write = generic_file_aio_write, + .aio_write = gfs2_file_aio_write, .unlocked_ioctl = gfs2_ioctl, .mmap = gfs2_mmap, .open = gfs2_open, @@ -741,7 +775,7 @@ const struct file_operations gfs2_file_fops_nolock = { .read = do_sync_read, .aio_read = generic_file_aio_read, .write = do_sync_write, - .aio_write = generic_file_aio_write, + .aio_write = gfs2_file_aio_write, .unlocked_ioctl = gfs2_ioctl, .mmap = gfs2_mmap, .open = gfs2_open, From 24b977b5fdea09bf356428870d32c09a275c8a3e Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Wed, 9 Dec 2009 13:55:12 +0000 Subject: [PATCH 0527/1626] GFS2: Fix locking bug in rename The rename code was taking a resource group lock in cases where it wasn't actually needed, this caused problems if the rename was resulting in an inode being unlinked. The patch ensures that we only take the rgrp lock early if it is really needed. Signed-off-by: Steven Whitehouse --- fs/gfs2/ops_inode.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c index 247436c10deb..78f73ca1ef3e 100644 --- a/fs/gfs2/ops_inode.c +++ b/fs/gfs2/ops_inode.c @@ -748,7 +748,7 @@ static int gfs2_rename(struct inode *odir, struct dentry *odentry, struct gfs2_rgrpd *nrgd; unsigned int num_gh; int dir_rename = 0; - int alloc_required; + int alloc_required = 0; unsigned int x; int error; @@ -867,7 +867,9 @@ static int gfs2_rename(struct inode *odir, struct dentry *odentry, goto out_gunlock; } - alloc_required = error = gfs2_diradd_alloc_required(ndir, &ndentry->d_name); + if (nip == NULL) + alloc_required = gfs2_diradd_alloc_required(ndir, &ndentry->d_name); + error = alloc_required; if (error < 0) goto out_gunlock; error = 0; From e412bdb1260d13ec5e7b90b537fec2179d6f8989 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 21 Dec 2009 13:55:28 +0000 Subject: [PATCH 0528/1626] GFS2: Fix gfs2_xattr_acl_chmod() The ref counting for the bh returned by gfs2_ea_find() was wrong. This patch ensures that we always drop the ref count to that bh correctly. Signed-off-by: Steven Whitehouse --- fs/gfs2/xattr.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/fs/gfs2/xattr.c b/fs/gfs2/xattr.c index 8a04108e0c22..c2ebdf2c01d4 100644 --- a/fs/gfs2/xattr.c +++ b/fs/gfs2/xattr.c @@ -1296,6 +1296,7 @@ fail: int gfs2_xattr_acl_chmod(struct gfs2_inode *ip, struct iattr *attr, char *data) { + struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode); struct gfs2_ea_location el; struct buffer_head *dibh; int error; @@ -1305,16 +1306,17 @@ int gfs2_xattr_acl_chmod(struct gfs2_inode *ip, struct iattr *attr, char *data) return error; if (GFS2_EA_IS_STUFFED(el.el_ea)) { - error = gfs2_trans_begin(GFS2_SB(&ip->i_inode), RES_DINODE + RES_EATTR, 0); - if (error) - return error; - - gfs2_trans_add_bh(ip->i_gl, el.el_bh, 1); - memcpy(GFS2_EA2DATA(el.el_ea), data, - GFS2_EA_DATA_LEN(el.el_ea)); - } else + error = gfs2_trans_begin(sdp, RES_DINODE + RES_EATTR, 0); + if (error == 0) { + gfs2_trans_add_bh(ip->i_gl, el.el_bh, 1); + memcpy(GFS2_EA2DATA(el.el_ea), data, + GFS2_EA_DATA_LEN(el.el_ea)); + } + } else { error = ea_acl_chmod_unstuffed(ip, el.el_ea, data); + } + brelse(el.el_bh); if (error) return error; @@ -1327,8 +1329,7 @@ int gfs2_xattr_acl_chmod(struct gfs2_inode *ip, struct iattr *attr, char *data) brelse(dibh); } - gfs2_trans_end(GFS2_SB(&ip->i_inode)); - + gfs2_trans_end(sdp); return error; } From 092a4e957a835cbf6b2ec82a6a4d6ff06c0a362e Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Wed, 6 Jan 2010 10:50:08 +0100 Subject: [PATCH 0529/1626] ARM: 5866/1: arm ptrace: use unsigned types for kernel pt_regs Make registers unsigned for kernel space. This is important for example in the perf events where the PC is stored into a u64. We don't want it sign extended so make the regs unsigned to prevent casts throughout the kernel. Signed-off-by: Jamie Iles Signed-off-by: Russell King --- arch/arm/include/asm/ptrace.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index bbecccda76d0..eec6e897ceb2 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -97,9 +97,15 @@ * stack during a system call. Note that sizeof(struct pt_regs) * has to be a multiple of 8. */ +#ifndef __KERNEL__ struct pt_regs { long uregs[18]; }; +#else /* __KERNEL__ */ +struct pt_regs { + unsigned long uregs[18]; +}; +#endif /* __KERNEL__ */ #define ARM_cpsr uregs[16] #define ARM_pc uregs[15] From 406eb02029ea95545c08dba75da393fa47d3fb43 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 7 Jan 2010 11:25:42 +0100 Subject: [PATCH 0530/1626] ARM: 5867/1: Update U300 defconfig This updates the U300 defconfig to include the DMA driver merged in 2.6.33-rc1 and adds a codepage that's needed to mount VFAT MMC cards as default. The rest is new config options. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/configs/u300_defconfig | 81 +++++++++++++++++++++++++++++---- 1 file changed, 71 insertions(+), 10 deletions(-) diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 610ac3c47b0f..9155196e623b 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc5 -# Sat Oct 17 23:32:24 2009 +# Linux kernel version: 2.6.33-rc2 +# Wed Jan 6 00:01:36 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -46,6 +46,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -119,14 +120,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -155,6 +183,7 @@ CONFIG_MMU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set @@ -177,6 +206,7 @@ CONFIG_ARCH_U300=y # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set # # ST-Ericsson AB U300/U330/U335/U365 Platform @@ -265,12 +295,10 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y @@ -499,14 +527,21 @@ CONFIG_MTD_NAND_IDS=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -517,6 +552,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -539,6 +575,7 @@ CONFIG_HAVE_IDE=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -645,7 +682,6 @@ CONFIG_I2C_STU300=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -661,6 +697,8 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set CONFIG_SPI_PL022=y +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -708,6 +746,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set @@ -716,6 +755,8 @@ CONFIG_SSB_POSSIBLE=y CONFIG_AB3100_CORE=y CONFIG_AB3100_OTP=y # CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set @@ -723,6 +764,7 @@ CONFIG_REGULATOR=y # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8660 is not set # CONFIG_REGULATOR_LP3971 is not set CONFIG_REGULATOR_AB3100=y # CONFIG_REGULATOR_TPS65023 is not set @@ -840,7 +882,9 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_REGULATOR is not set # CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set # # LED Triggers @@ -882,6 +926,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -911,7 +956,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set CONFIG_RTC_DRV_AB3100=y @@ -926,6 +973,15 @@ CONFIG_DMADEVICES=y # # DMA Devices # +CONFIG_COH901318=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -1018,7 +1074,7 @@ CONFIG_MISC_FILESYSTEMS=y CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set @@ -1135,6 +1191,7 @@ CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_ERRORS is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_LL is not set +# CONFIG_OC_ETM is not set # # Security options @@ -1142,7 +1199,11 @@ CONFIG_ARM_UNWIND=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set From 22325525d8bb1478daddefec1b762e7882bcd515 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Fri, 8 Jan 2010 16:59:34 +0100 Subject: [PATCH 0531/1626] ARM: 5868/1: ARM: fix "BUG: using smp_processor_id() in preemptible code" Fix the following warning, which appears when the register dump for a faulting process is printed in a kernel with SMP, DEBUG_PREEMPT, and DEBUG_USER (with user_debug=31) enabled: BUG: using smp_processor_id() in preemptible [00000000] code: init/1 caller is __show_regs+0x18/0x234 Backtrace: [] (dump_backtrace+0x0/0x114) from [] (dump_stack+0x18/0x1c) r6:c781a000 r5:c0157544 r4:00000001 r3:00000000 [] (dump_stack+0x0/0x1c) from [] (debug_smp_processor_id+0xc4/0xf8) [] (debug_smp_processor_id+0x0/0xf8) from [] (__show_regs+0x18/0x234) r6:c781bfb0 r5:00000000 r4:c781bfb0 r3:00000000 [] (__show_regs+0x0/0x234) from [] (show_regs+0x40/0x50) [] (show_regs+0x0/0x50) from [] (__do_user_fault+0x5c/0xa4) r4:c781c000 r3:00000000 [] (__do_user_fault+0x0/0xa4) from [] (do_page_fault+0x1b4/0x1e4) r7:00000000 r6:00010000 r5:c781bfb0 r4:c781c000 [] (do_page_fault+0x0/0x1e4) from [] (do_DataAbort+0x3c/0xa0) [] (do_DataAbort+0x0/0xa0) from [] (ret_from_exception+0x0/0x10) Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/kernel/process.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 67304138a2ca..ba2adefa53f7 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -212,7 +212,8 @@ void __show_regs(struct pt_regs *regs) char buf[64]; printk("CPU: %d %s (%s %.*s)\n", - smp_processor_id(), print_tainted(), init_utsname()->release, + raw_smp_processor_id(), print_tainted(), + init_utsname()->release, (int)strcspn(init_utsname()->version, " "), init_utsname()->version); print_symbol("PC is at %s\n", instruction_pointer(regs)); From 5ee518ecbcb5934e284ea51a19a939c891f5f7ea Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 7 Jan 2010 16:29:20 +0000 Subject: [PATCH 0532/1626] ASoC: Fix WM8350 DSP mode B configuration We need to set the LRCLK inversion bit to select DSP mode. Signed-off-by: Mark Brown Acked-by: Liam Girdwood Cc: stable@kernel.org --- sound/soc/codecs/wm8350.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index ebbf11b653a4..718ef912e758 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -925,7 +925,7 @@ static int wm8350_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) iface |= 0x3 << 8; break; case SND_SOC_DAIFMT_DSP_B: - iface |= 0x3 << 8; /* lg not sure which mode */ + iface |= 0x3 << 8 | WM8350_AIF_LRCLK_INV; break; default: return -EINVAL; From dce766af541f6605fa9889892c0280bab31c66ab Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 8 Jan 2010 17:31:24 +0100 Subject: [PATCH 0533/1626] netfilter: ebtables: enforce CAP_NET_ADMIN normal users are currently allowed to set/modify ebtables rules. Restrict it to processes with CAP_NET_ADMIN. Note that this cannot be reproduced with unmodified ebtables binary because it uses SOCK_RAW. Signed-off-by: Florian Westphal Cc: stable@kernel.org Signed-off-by: Patrick McHardy --- net/bridge/netfilter/ebtables.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index bd1c65425d4f..0b7f262cd148 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -1406,6 +1406,9 @@ static int do_ebt_set_ctl(struct sock *sk, { int ret; + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + switch(cmd) { case EBT_SO_SET_ENTRIES: ret = do_replace(sock_net(sk), user, len); @@ -1425,6 +1428,9 @@ static int do_ebt_get_ctl(struct sock *sk, int cmd, void __user *user, int *len) struct ebt_replace tmp; struct ebt_table *t; + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&tmp, user, sizeof(tmp))) return -EFAULT; From 1866b54525d13402b2d129b906c4d189377f89c5 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Fri, 8 Jan 2010 10:29:04 -0800 Subject: [PATCH 0534/1626] omap: McBSP: Fix possible port lockout In its current form, the omap_mcbsp_request() function can return after irq_request() failure without any cleanups, effectively locking out the port forever with clocks left running. Fix it. Signed-off-by: Janusz Krzysztofik Acked-by: Jarkko Nikula Acked-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/mcbsp.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 2cc1cc328bac..f75767278fc3 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -436,7 +436,7 @@ int omap_mcbsp_request(unsigned int id) dev_err(mcbsp->dev, "Unable to request TX IRQ %d " "for McBSP%d\n", mcbsp->tx_irq, mcbsp->id); - return err; + goto error; } init_completion(&mcbsp->rx_irq_completion); @@ -446,12 +446,26 @@ int omap_mcbsp_request(unsigned int id) dev_err(mcbsp->dev, "Unable to request RX IRQ %d " "for McBSP%d\n", mcbsp->rx_irq, mcbsp->id); - free_irq(mcbsp->tx_irq, (void *)mcbsp); - return err; + goto tx_irq; } } return 0; +tx_irq: + free_irq(mcbsp->tx_irq, (void *)mcbsp); +error: + if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) + mcbsp->pdata->ops->free(id); + + /* Do procedure specific to omap34xx arch, if applicable */ + omap34xx_mcbsp_free(mcbsp); + + clk_disable(mcbsp->fclk); + clk_disable(mcbsp->iclk); + + mcbsp->free = 1; + + return err; } EXPORT_SYMBOL(omap_mcbsp_request); From 4318f36b7c93a60a100f43fc6b7f13bebc59d017 Mon Sep 17 00:00:00 2001 From: Cory Maccarrone Date: Fri, 8 Jan 2010 10:29:04 -0800 Subject: [PATCH 0535/1626] omap: gpio: Simultaneously requested rising and falling edge Some chips, namely any OMAP1 chips using METHOD_MPUIO, OMAP15xx and OMAP7xx, cannot be setup to respond to on-chip GPIO interrupts in both rising and falling edge directions -- they can only respond to one direction or the other, depending on how the ICR is configured. Additionally, current code forces rising edge detection if both flags are specified: if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; else if (trigger & IRQ_TYPE_EDGE_FALLING) l &= ~(1 << gpio); else goto bad; This change implements a toggle function that will modify the ICR to flip the direction of interrupt for IRQs that are requested with both rising and falling flags. The toggle function is not called for chips and GPIOs it does not apply to through the use of a flip_mask that's added on a per-bank basis. The mask is only set for those GPIOs where a toggle is necessary. Edge detection starts out the same as above with FALLING mode first. The toggle happens on EACH interrupt; without it, we have the following sequence of actions on GPIO transition: ICR GPIO Result 0x1 0 -> 1 (rising) Interrupt 0x1 1 -> 0 (falling) No interrupt (set ICR to 0x0 manually) 0x0 0 -> 1 (rising) No interrupt 0x0 1 -> 0 (falling) Interrupt That is, with the ICR set to 1 for a gpio, only rising edge interrupts are caught, and with it set to 0, only falling edge interrupts are caught. If we add in the toggle, we get this: ICR GPIO Result 0x1 0 -> 1 (rising) Interrupt (ICR set to 0x0) 0x0 1 -> 0 (falling) Interrupt (ICR set to 0x1) 0x1 0 -> 1 ... so, both rising and falling are caught, per the request for both (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING). Signed-off-by: Cory Maccarrone Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 61 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 60 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 04846811d0aa..f8dfa8d5e605 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -192,6 +192,7 @@ struct gpio_bank { u32 saved_risingdetect; #endif u32 level_mask; + u32 toggle_mask; spinlock_t lock; struct gpio_chip chip; struct clk *dbck; @@ -749,6 +750,44 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, } #endif +/* + * This only applies to chips that can't do both rising and falling edge + * detection at once. For all other chips, this function is a noop. + */ +static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg = bank->base; + u32 l = 0; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_GPIO_INT_EDGE; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_INT_CONTROL; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_CONTROL; + break; +#endif + default: + return; + } + + l = __raw_readl(reg); + if ((l >> gpio) & 1) + l &= ~(1 << gpio); + else + l |= 1 << gpio; + + __raw_writel(l, reg); +} + static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) { void __iomem *reg = bank->base; @@ -759,6 +798,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); + if (trigger & IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; else if (trigger & IRQ_TYPE_EDGE_FALLING) @@ -771,6 +812,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); + if (trigger & IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; else if (trigger & IRQ_TYPE_EDGE_FALLING) @@ -803,6 +846,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_7XX: reg += OMAP7XX_GPIO_INT_CONTROL; l = __raw_readl(reg); + if (trigger & IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; else if (trigger & IRQ_TYPE_EDGE_FALLING) @@ -1217,7 +1262,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) { void __iomem *isr_reg = NULL; u32 isr; - unsigned int gpio_irq; + unsigned int gpio_irq, gpio_index; struct gpio_bank *bank; u32 retrigger = 0; int unmasked = 0; @@ -1284,9 +1329,23 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) gpio_irq = bank->virtual_irq_start; for (; isr != 0; isr >>= 1, gpio_irq++) { + gpio_index = get_gpio_index(irq_to_gpio(gpio_irq)); + if (!(isr & 1)) continue; +#ifdef CONFIG_ARCH_OMAP1 + /* + * Some chips can't respond to both rising and falling + * at the same time. If this irq was requested with + * both flags, we need to flip the ICR data for the IRQ + * to respond to the IRQ for the opposite direction. + * This will be indicated in the bank toggle_mask. + */ + if (bank->toggle_mask & (1 << gpio_index)) + _toggle_gpio_edge_triggering(bank, gpio_index); +#endif + generic_handle_irq(gpio_irq); } } From acf9d467dc951daa0071b5a1f4bed8c108f7ebec Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 8 Jan 2010 10:29:05 -0800 Subject: [PATCH 0536/1626] omap: &&/|| confusion in iommu_put() obj can't be both NULL and be an error pointer. Signed-off-by: Roel Kluin Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index c0ff1e39d893..463d6386aff2 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -827,7 +827,7 @@ EXPORT_SYMBOL_GPL(iommu_get); **/ void iommu_put(struct iommu *obj) { - if (!obj && IS_ERR(obj)) + if (!obj || IS_ERR(obj)) return; mutex_lock(&obj->iommu_lock); From 4cc6420c123317489e6c0d4bf7112f7098ac82ef Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 8 Jan 2010 10:29:05 -0800 Subject: [PATCH 0537/1626] omap: Remove uninitialized warning for gpio.c Flags is not used on 15xx. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index f8dfa8d5e605..d17620c50c28 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1117,7 +1117,7 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena */ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) { - unsigned long flags; + unsigned long uninitialized_var(flags); switch (bank->method) { #ifdef CONFIG_ARCH_OMAP16XX From c5c4dce45d7538ada6e9aac4cdb2909bc1cb28f6 Mon Sep 17 00:00:00 2001 From: Cory Maccarrone Date: Fri, 8 Jan 2010 10:29:05 -0800 Subject: [PATCH 0538/1626] omap1: Add 7xx clocks and pin muxes for SPI Commit 35c9049b27040d09461bc90928ad770be7ddf661 added drivers/spi/omap_spi_100k.c. This patch add the related clocks and pin muxing entries to make the driver work on omap7xx platforms. Signed-off-by: Cory Maccarrone Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock_data.c | 4 +++ arch/arm/mach-omap1/devices.c | 35 +++++++++++++++++++++++ arch/arm/mach-omap1/mux.c | 8 ++++++ arch/arm/plat-omap/include/plat/mux.h | 8 ++++++ arch/arm/plat-omap/include/plat/omap7xx.h | 3 ++ 5 files changed, 58 insertions(+) diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index ab995a9c606c..6887bf308aac 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -658,6 +658,10 @@ static struct omap_clk omap_clks[] = { CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), + CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX), + CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX), + CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX), + CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX), CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 23ded2d49600..a2d07aa75c9e 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -23,6 +24,7 @@ #include #include #include +#include /*-------------------------------------------------------------------------*/ @@ -196,6 +198,38 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, /*-------------------------------------------------------------------------*/ +/* OMAP7xx SPI support */ +#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE) + +struct platform_device omap_spi1 = { + .name = "omap1_spi100k", + .id = 1, +}; + +struct platform_device omap_spi2 = { + .name = "omap1_spi100k", + .id = 2, +}; + +static void omap_init_spi100k(void) +{ + omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff); + if (omap_spi1.dev.platform_data) + platform_device_register(&omap_spi1); + + omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff); + if (omap_spi2.dev.platform_data) + platform_device_register(&omap_spi2); +} + +#else +static inline void omap_init_spi100k(void) +{ +} +#endif + +/*-------------------------------------------------------------------------*/ + #if defined(CONFIG_OMAP_STI) #define OMAP1_STI_BASE 0xfffea000 @@ -263,6 +297,7 @@ static int __init omap1_init_devices(void) omap_init_mbox(); omap_init_rtc(); + omap_init_spi100k(); omap_init_sti(); return 0; diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 07212cc621ae..84341377232d 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -62,6 +62,14 @@ MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0) /* I2C interface */ MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0) MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0) + +/* SPI pins */ +MUX_CFG_7XX("SPI_7XX_1", 6, 5, 4, 4, 1, 0) +MUX_CFG_7XX("SPI_7XX_2", 6, 9, 4, 8, 1, 0) +MUX_CFG_7XX("SPI_7XX_3", 6, 13, 4, 12, 1, 0) +MUX_CFG_7XX("SPI_7XX_4", 6, 17, 4, 16, 1, 0) +MUX_CFG_7XX("SPI_7XX_5", 8, 25, 0, 24, 0, 0) +MUX_CFG_7XX("SPI_7XX_6", 9, 5, 0, 4, 0, 0) }; #define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index 8f069cc80350..692c90e89ac3 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -183,6 +183,14 @@ enum omap7xx_index { /* I2C */ I2C_7XX_SCL, I2C_7XX_SDA, + + /* SPI */ + SPI_7XX_1, + SPI_7XX_2, + SPI_7XX_3, + SPI_7XX_4, + SPI_7XX_5, + SPI_7XX_6, }; enum omap1xxx_index { diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h index 53f52414b0e9..48e4757e1e30 100644 --- a/arch/arm/plat-omap/include/plat/omap7xx.h +++ b/arch/arm/plat-omap/include/plat/omap7xx.h @@ -46,6 +46,9 @@ #define OMAP7XX_DSPREG_SIZE SZ_128K #define OMAP7XX_DSPREG_START 0xE1000000 +#define OMAP7XX_SPI1_BASE 0xfffc0800 +#define OMAP7XX_SPI2_BASE 0xfffc1000 + /* * ---------------------------------------------------------------------------- * OMAP7XX specific configuration registers From 66215949e6512f61c2c92b65ea79f8566e9e650a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 8 Jan 2010 10:29:06 -0800 Subject: [PATCH 0539/1626] omap1: Fix compile for omap1_bl.c Commit 9905a43b made struct backlight_ops const. Omap was setting check_fb dynamically, which caused the following compile error: drivers/video/backlight/omap1_bl.c: In function 'omapbl_probe': drivers/video/backlight/omap1_bl.c:142: error: assignment of read-only variable 'omapbl_ops' Turns out pdata->check_fb is not being used, so just remove it to fix the compile. Cc: Emese Revfy Cc: Richard Purdie Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/board.h | 1 - drivers/video/backlight/omap1_bl.c | 2 -- 2 files changed, 3 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index 376ce18216ff..5cd622039da0 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -99,7 +99,6 @@ struct fb_info; struct omap_backlight_config { int default_intensity; int (*set_power)(struct device *dev, int state); - int (*check_fb)(struct fb_info *fb); }; struct omap_fbmem_config { diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c index 409ca9643528..a3a7f8938175 100644 --- a/drivers/video/backlight/omap1_bl.c +++ b/drivers/video/backlight/omap1_bl.c @@ -139,8 +139,6 @@ static int omapbl_probe(struct platform_device *pdev) if (!pdata) return -ENXIO; - omapbl_ops.check_fb = pdata->check_fb; - bl = kzalloc(sizeof(struct omap_backlight), GFP_KERNEL); if (unlikely(!bl)) return -ENOMEM; From 9230372aeecc0a634f708e9eb8668769daa1ed5a Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Fri, 8 Jan 2010 10:29:06 -0800 Subject: [PATCH 0540/1626] omap2/3: make serial_in_override() address the right uart port Commit f62349ee9788b1d94c55eb6c291d74a1f69bdd9e makes it possible to have some other than first uart port as ttyS0, which breaks the workaround serial_in_override() function which will try to address the first uart port (for ttyS0) and not the one that was initialized. Signed-off-by: Alexander Shishkin CC: Mika Westerberg Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/serial.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 19805a7de06c..8c964bec8159 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -125,6 +125,13 @@ static struct plat_serial8250_port serial_platform_data3[] = { } }; #endif +static inline unsigned int __serial_read_reg(struct uart_port *up, + int offset) +{ + offset <<= up->regshift; + return (unsigned int)__raw_readb(up->membase + offset); +} + static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, int offset) { @@ -583,11 +590,12 @@ static unsigned int serial_in_override(struct uart_port *up, int offset) { if (UART_RX == offset) { unsigned int lsr; - lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR); + lsr = __serial_read_reg(up, UART_LSR); if (!(lsr & UART_LSR_DR)) return -EPERM; } - return serial_read_reg(omap_uart[up->line].p, offset); + + return __serial_read_reg(up, offset); } void __init omap_serial_early_init(void) From 6b06ebdfbd3100ffa789d3893bc7c08b1f91ea30 Mon Sep 17 00:00:00 2001 From: Vimal Singh Date: Fri, 8 Jan 2010 10:29:07 -0800 Subject: [PATCH 0541/1626] omap2/3: ZOOM: Correcting key mapping for few keys Keys: 'right arrow', 'up arrow' and 'select' were mapped wrongly. This patch corrects them. This patch also adds one missing key present in the board, currently I added it as 'unknown' key, as I am not able to find proper description for this key. One key entry (r: 7, c: 5) is present in the keymap, which is really not present in the board, removing it. Signed-off-by: Vimal Singh Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-zoom-peripherals.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 8dd277c36661..1e3dfb652acc 100755 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -63,21 +63,21 @@ static int board_keymap[] = { KEY(5, 1, KEY_H), KEY(5, 2, KEY_J), KEY(5, 3, KEY_F3), + KEY(5, 4, KEY_UNKNOWN), KEY(5, 5, KEY_VOLUMEDOWN), KEY(5, 6, KEY_M), - KEY(5, 7, KEY_ENTER), + KEY(5, 7, KEY_RIGHT), KEY(6, 0, KEY_Q), KEY(6, 1, KEY_A), KEY(6, 2, KEY_N), KEY(6, 3, KEY_BACKSPACE), KEY(6, 6, KEY_P), - KEY(6, 7, KEY_SELECT), + KEY(6, 7, KEY_UP), KEY(7, 0, KEY_PROG1), /*MACRO 1 */ KEY(7, 1, KEY_PROG2), /*MACRO 2 */ KEY(7, 2, KEY_PROG3), /*MACRO 3 */ KEY(7, 3, KEY_PROG4), /*MACRO 4 */ - KEY(7, 5, KEY_RIGHT), - KEY(7, 6, KEY_UP), + KEY(7, 6, KEY_SELECT), KEY(7, 7, KEY_DOWN) }; From 83969bfa2022962c12272f4f860c05e28ee4509d Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 8 Jan 2010 10:29:07 -0800 Subject: [PATCH 0542/1626] omap3: add missing parentheses not(!) has a higher precedence than bit and(&). Signed-off-by: Roel Kluin Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/control.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h index 2ae884378638..a745d62fad0d 100644 --- a/arch/arm/plat-omap/include/plat/control.h +++ b/arch/arm/plat-omap/include/plat/control.h @@ -147,7 +147,7 @@ #define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) #define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) #define OMAP343X_CONTROL_DEBOBS(i) (OMAP2_CONTROL_GENERAL + 0x01B0 \ - + ((i) >> 1) * 4 + (!(i) & 1) * 2) + + ((i) >> 1) * 4 + (!((i) & 1)) * 2) #define OMAP343X_CONTROL_PROG_IO0 (OMAP2_CONTROL_GENERAL + 0x01D4) #define OMAP343X_CONTROL_PROG_IO1 (OMAP2_CONTROL_GENERAL + 0x01D8) #define OMAP343X_CONTROL_DSS_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E0) From 1b6e821f234f9e22ad1ef4919e140625af251935 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 8 Jan 2010 10:29:07 -0800 Subject: [PATCH 0543/1626] omap3: add missing parentheses `!' has a higher precedence than `&' so parentheses are required. Signed-off-by: Roel Kluin Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pm34xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 81ed252a0f8a..c6cc809afb79 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -124,8 +124,8 @@ static void omap3_core_save_context(void) control_padconf_off |= START_PADCONF_SAVE; omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF); /* wait for the save to complete */ - while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS) - & PADCONF_SAVE_DONE) + while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS) + & PADCONF_SAVE_DONE)) ; /* Save the Interrupt controller context */ omap_intc_save_context(); From d04eb60066ed532d2e5da9f39cc0c79883d8a33c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 8 Jan 2010 10:29:08 -0800 Subject: [PATCH 0544/1626] omap3: Fix booting if package is uninitialized Otherwise bringing up new boards can be harder: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.33-rc2-00015-g0bc9c93-dirty #37) PC is at omap_mux_init+0xa4/0x3d8 LR is at omap_mux_init+0x3c/0x3d8 ... Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index e071b3fd1878..459ef23ab8a8 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -994,8 +994,10 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size, } #ifdef CONFIG_OMAP_MUX - omap_mux_package_fixup(package_subset, superset); - omap_mux_package_init_balls(package_balls, superset); + if (package_subset) + omap_mux_package_fixup(package_subset, superset); + if (package_balls) + omap_mux_package_init_balls(package_balls, superset); omap_mux_set_cmdline_signals(); omap_mux_set_board_signals(board_mux); #endif From 342aa2c1721e2714f43d957c3dd0bdaaa688c207 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Fri, 8 Jan 2010 10:29:08 -0800 Subject: [PATCH 0545/1626] omap3: EVM: Choose OMAP_PACKAGE_CBB Without this the kernel doesn't boot, it craches in omap_mux_package_fixup(), since the package_subset becomes NULL. Signed-off-by: Vaibhav Hiremath Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 10eafa70a909..606bf04f51b6 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -80,6 +80,7 @@ config MACH_OVERO config MACH_OMAP3EVM bool "OMAP 3530 EVM board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" From a651d80c7136029de3c044308fd63d88348915ff Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Fri, 8 Jan 2010 10:53:28 -0800 Subject: [PATCH 0546/1626] [IA64] move fnptr definition inside #ifdef __KERNEL__ Linus pointed out that this definition should not be exported to user space. Signed-off-by: Tony Luck --- arch/ia64/include/asm/types.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/ia64/include/asm/types.h b/arch/ia64/include/asm/types.h index b8e5d97be158..93773fd37be0 100644 --- a/arch/ia64/include/asm/types.h +++ b/arch/ia64/include/asm/types.h @@ -30,16 +30,16 @@ typedef unsigned int umode_t; -struct fnptr { - unsigned long ip; - unsigned long gp; -}; - /* * These aren't exported outside the kernel to avoid name space clashes */ # ifdef __KERNEL__ +struct fnptr { + unsigned long ip; + unsigned long gp; +}; + /* DMA addresses are 64-bits wide, in general. */ typedef u64 dma_addr_t; From a539bd8c86549b545b4ed27a0cfaf53fe649054d Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 17 Dec 2009 00:20:07 +0000 Subject: [PATCH 0547/1626] xfs: kill some warnings on i386 builds Randy Dunlap Reported printk() format-related warnings reported on i386 builds in his environment. Dave Chinner provided this patch to eliminate them. Signed-off by: Dave Chinner Acked-by: Randy Dunlap Signed-off-by: Alex Elder --- fs/xfs/linux-2.6/xfs_trace.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_trace.h b/fs/xfs/linux-2.6/xfs_trace.h index c40834bdee58..d4ded59d2ffe 100644 --- a/fs/xfs/linux-2.6/xfs_trace.h +++ b/fs/xfs/linux-2.6/xfs_trace.h @@ -815,7 +815,7 @@ TRACE_EVENT(name, \ ), \ TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx " \ "offset 0x%llx count %zd flags %s " \ - "startoff 0x%llx startblock 0x%llx blockcount 0x%llx", \ + "startoff 0x%llx startblock %s blockcount 0x%llx", \ MAJOR(__entry->dev), MINOR(__entry->dev), \ __entry->ino, \ __entry->size, \ @@ -824,7 +824,7 @@ TRACE_EVENT(name, \ __entry->count, \ __print_flags(__entry->flags, "|", BMAPI_FLAGS), \ __entry->startoff, \ - __entry->startblock, \ + xfs_fmtfsblock(__entry->startblock), \ __entry->blockcount) \ ) DEFINE_IOMAP_EVENT(xfs_iomap_enter); @@ -1201,7 +1201,7 @@ TRACE_EVENT(name, \ TP_printk("dev %d:%d agno %u agbno %u minlen %u maxlen %u mod %u " \ "prod %u minleft %u total %u alignment %u minalignslop %u " \ "len %u type %s otype %s wasdel %d wasfromfl %d isfl %d " \ - "userdata %d firstblock 0x%llx", \ + "userdata %d firstblock %s", \ MAJOR(__entry->dev), MINOR(__entry->dev), \ __entry->agno, \ __entry->agbno, \ @@ -1220,7 +1220,7 @@ TRACE_EVENT(name, \ __entry->wasfromfl, \ __entry->isfl, \ __entry->userdata, \ - __entry->firstblock) \ + xfs_fmtfsblock(__entry->firstblock)) \ ) DEFINE_ALLOC_EVENT(xfs_alloc_exact_done); From 045cfb71a3901005bf6dcedae98cecb3360a0bfc Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 7 Jan 2010 15:01:42 +0100 Subject: [PATCH 0548/1626] mac80211: fix queue selection for packets injected via monitor interface Commit 'mac80211: fix skb buffering issue' added an ->ndo_select_queue() for monitor interfaces which can end up dereferencing ieee802_1d_to_ac[] beyond the end of the array for injected data packets (as skb->priority isn't guaranteed to be zero or within [0:7]), which then triggers the WARN_ON in net/core/dev.c:dev_cap_txqueue(). Fix this by always setting the priority to zero on injected data frames. Signed-off-by: Lennert Buytenhek Cc: stable@kernel.org Signed-off-by: John W. Linville --- net/mac80211/iface.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index ff762ed34f1e..44188ef80a63 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -685,6 +685,7 @@ static u16 ieee80211_monitor_select_queue(struct net_device *dev, return ieee802_1d_to_ac[skb->priority]; } + skb->priority = 0; return ieee80211_downgrade_queue(local, skb); } From d79074488083ec0d7ecd15352192dc1631f25643 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 7 Jan 2010 20:23:53 +0100 Subject: [PATCH 0549/1626] mac80211: add missing sanity checks for action frames Various missing sanity checks caused rejected action frames to be interpreted as channel switch announcements, which can cause a client mode interface to switch away from its operating channel, thereby losing connectivity. This patch ensures that only spectrum management action frames are processed by the CSA handling function and prevents rejected action frames from getting processed by the MLME code. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 4 +++- net/mac80211/rx.c | 4 ++++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 3e1eab963b8e..05a18f43e1bf 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1963,7 +1963,9 @@ static void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, rma = ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len); break; case IEEE80211_STYPE_ACTION: - /* XXX: differentiate, can only happen for CSA now! */ + if (mgmt->u.action.category != WLAN_CATEGORY_SPECTRUM_MGMT) + break; + ieee80211_sta_process_chanswitch(sdata, &mgmt->u.action.u.chan_switch.sw_elem, ifmgd->associated); diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 54296999834b..82a30c1bf3ab 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2015,6 +2015,10 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) } break; default: + /* do not process rejected action frames */ + if (mgmt->u.action.category & 0x80) + return RX_DROP_MONITOR; + return RX_CONTINUE; } From b49bb574e44226b332c28439999d196ddec2f643 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Jan 2010 19:00:00 +0100 Subject: [PATCH 0550/1626] mac80211: fix endian error I forgot to convert the radiotap length to CPU endian, which sparse found thankfully. Signed-off-by: Johannes Berg Cc: stable@kernel.org Signed-off-by: John W. Linville --- net/mac80211/iface.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 44188ef80a63..d62ec0803bec 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -675,10 +675,10 @@ static u16 ieee80211_monitor_select_queue(struct net_device *dev, return 0; if (skb->len < 4 || - skb->len < rtap->it_len + 2 /* frame control */) + skb->len < le16_to_cpu(rtap->it_len) + 2 /* frame control */) return 0; /* doesn't matter, frame will be dropped */ - hdr = (void *)((u8 *)skb->data + rtap->it_len); + hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len)); if (!ieee80211_is_data(hdr->frame_control)) { skb->priority = 7; From c8106d7625a58ee4387cb2efe3e82320ad44b467 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Fri, 8 Jan 2010 10:04:30 -0800 Subject: [PATCH 0551/1626] iwlwifi: fix iwl_queue_used bug when read_ptr == write_ptr When txq read_ptr equals to write_ptr, iwl_queue_used should always return false. Because there is no used TFD in this case. This is a complementary fix to the fix already included in commit "iwl3945: fix panic in iwl3945 driver". Both fixes are needed to address the panic below. This problem was discussed on linux-wireless in http://thread.gmane.org/gmane.linux.kernel.wireless.general/43568 <1>[ 7290.414172] IP: [] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.414205] PGD 0 <1>[ 7290.414214] Thread overran stack, or stack corrupted <0>[ 7290.414229] Oops: 0002 [#1] PREEMPT SMP <0>[ 7290.414246] last sysfs file: /sys/devices/platform/coretemp.1/temp1_input <4>[ 7290.414265] CPU 0 <4>[ 7290.414274] Modules linked in: af_packet nfsd usb_storage usb_libusual cpufreq_powersave exportfs cpufreq_conservative iwl3945 nfs cpufreq_userspace snd_hda_codec_realtek acpi_cpufreq uvcvideo lockd iwlcore snd_hda_intel joydev coretemp nfs_acl videodev snd_hda_codec mac80211 v4l1_compat snd_hwdep sbp2 v4l2_compat_ioctl32 uhci_hcd psmouse auth_rpcgss ohci1394 cfg80211 ehci_hcd video ieee1394 snd_pcm serio_raw battery ac nvidia(P) usbcore output sunrpc evdev lirc_ene0100 snd_page_alloc rfkill tg3 libphy fuse lzo lzo_decompress lzo_compress <6>[ 7290.414486] Pid: 0, comm: swapper Tainted: P 2.6.32-rc8-wl #213 Aspire 5720 <6>[ 7290.414507] RIP: 0010:[] [] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <6>[ 7290.414541] RSP: 0018:ffff880002203d60 EFLAGS: 00010246 <6>[ 7290.414557] RAX: 000000000000004f RBX: ffff880064c11600 RCX: 0000000000000013 <6>[ 7290.414576] RDX: ffffffffa0ddcf20 RSI: ffff8800512b7008 RDI: 0000000000000038 <6>[ 7290.414596] RBP: ffff880002203dd0 R08: 0000000000000000 R09: 0000000000000100 <6>[ 7290.414616] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000a0 <6>[ 7290.414635] R13: 0000000000000002 R14: 0000000000000013 R15: 0000000000020201 <6>[ 7290.414655] FS: 0000000000000000(0000) GS:ffff880002200000(0000) knlGS:0000000000000000 <6>[ 7290.414677] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <6>[ 7290.414693] CR2: 0000000000000041 CR3: 0000000001001000 CR4: 00000000000006f0 <6>[ 7290.414712] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <6>[ 7290.414732] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>[ 7290.414752] Process swapper (pid: 0, threadinfo ffffffff81524000, task ffffffff81528b60) <0>[ 7290.414772] Stack: <4>[ 7290.414780] ffff880002203da0 0000000000000046 0000000000000000 0000000000000046 <4>[ 7290.414804] <0> 0000000000000282 0000000000000282 0000000000000282 ffff880064c12010 <4>[ 7290.414830] <0> ffff880002203db0 ffff880064c11600 ffff880064c12e50 ffff8800512b7000 <0>[ 7290.414858] Call Trace: <0>[ 7290.414867] <4>[ 7290.414884] [] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945] <4>[ 7290.414910] [] ? _spin_unlock+0x30/0x60 <4>[ 7290.414931] [] tasklet_action+0x101/0x110 <4>[ 7290.414950] [] __do_softirq+0xc0/0x160 <4>[ 7290.414968] [] call_softirq+0x1c/0x30 <4>[ 7290.414986] [] do_softirq+0x75/0xb0 <4>[ 7290.415003] [] irq_exit+0x95/0xa0 <4>[ 7290.415020] [] do_IRQ+0x77/0xf0 <4>[ 7290.415038] [] ret_from_intr+0x0/0xf <0>[ 7290.415052] <4>[ 7290.415067] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415087] [] ? acpi_idle_enter_bm+0x27a/0x2a5 <4>[ 7290.415107] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415130] [] ? cpuidle_idle_call+0x93/0xf0 <4>[ 7290.415149] [] ? cpu_idle+0xa7/0x110 <4>[ 7290.415168] [] ? rest_init+0x75/0x80 <4>[ 7290.415187] [] ? start_kernel+0x3a7/0x3b3 <4>[ 7290.415206] [] ? x86_64_start_reservations+0x125/0x129 <4>[ 7290.415227] [] ? x86_64_start_kernel+0xe4/0xeb <0>[ 7290.415243] Code: 00 41 39 ce 0f 8d e8 01 00 00 48 8b 47 40 48 63 d2 48 69 d2 98 00 00 00 4c 8b 04 02 48 c7 c2 20 cf dd a0 49 8d 78 38 49 8d 40 4f 47 09 00 c6 47 0c 00 c6 47 0f 00 c6 47 12 00 c6 47 15 00 49 <1>[ 7290.415382] RIP [] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.415410] RSP <0>[ 7290.415421] CR2: 0000000000000041 <4>[ 7290.415436] ---[ end trace ec46807277caa515 ]--- <0>[ 7290.415450] Kernel panic - not syncing: Fatal exception in interrupt <4>[ 7290.415468] Pid: 0, comm: swapper Tainted: P D 2.6.32-rc8-wl #213 <4>[ 7290.415486] Call Trace: <4>[ 7290.415495] [] panic+0x7d/0x13a <4>[ 7290.415519] [] oops_end+0xda/0xe0 <4>[ 7290.415538] [] no_context+0xea/0x250 <4>[ 7290.415557] [] ? select_task_rq_fair+0x511/0x780 <4>[ 7290.415578] [] __bad_area_nosemaphore+0x125/0x1e0 <4>[ 7290.415597] [] ? __enqueue_entity+0x7c/0x80 <4>[ 7290.415616] [] ? enqueue_task_fair+0x111/0x150 <4>[ 7290.415636] [] bad_area_nosemaphore+0xe/0x10 <4>[ 7290.415656] [] do_page_fault+0x26a/0x320 <4>[ 7290.415674] [] page_fault+0x1f/0x30 <4>[ 7290.415697] [] ? iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.415723] [] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945] <4>[ 7290.415746] [] ? _spin_unlock+0x30/0x60 <4>[ 7290.415764] [] tasklet_action+0x101/0x110 <4>[ 7290.415783] [] __do_softirq+0xc0/0x160 <4>[ 7290.415801] [] call_softirq+0x1c/0x30 <4>[ 7290.415818] [] do_softirq+0x75/0xb0 <4>[ 7290.415835] [] irq_exit+0x95/0xa0 <4>[ 7290.415852] [] do_IRQ+0x77/0xf0 <4>[ 7290.415869] [] ret_from_intr+0x0/0xf <4>[ 7290.415883] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415911] [] ? acpi_idle_enter_bm+0x27a/0x2a5 <4>[ 7290.415931] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415952] [] ? cpuidle_idle_call+0x93/0xf0 <4>[ 7290.415971] [] ? cpu_idle+0xa7/0x110 <4>[ 7290.415989] [] ? rest_init+0x75/0x80 <4>[ 7290.416007] [] ? start_kernel+0x3a7/0x3b3 <4>[ 7290.416026] [] ? x86_64_start_reservations+0x125/0x129 <4>[ 7290.416047] [] ? x86_64_start_kernel+0xe4/0xeb Reported-by: Maxim Levitsky Tested-by: Maxim Levitsky Signed-off-by: Zhu Yi Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-dev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 165d1f6e2dd9..3822cf53e368 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -711,7 +711,7 @@ extern void iwl_txq_ctx_stop(struct iwl_priv *priv); extern int iwl_queue_space(const struct iwl_queue *q); static inline int iwl_queue_used(const struct iwl_queue *q, int i) { - return q->write_ptr > q->read_ptr ? + return q->write_ptr >= q->read_ptr ? (i >= q->read_ptr && i < q->write_ptr) : !(i < q->read_ptr && i >= q->write_ptr); } From c91c3efca5297bd67324654524ced38162f2e579 Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Fri, 8 Jan 2010 10:04:31 -0800 Subject: [PATCH 0552/1626] iwlwifi: disable tx on beacon update notification On beacon change update notification from mac we are not disabling the tx in adhoc mode. Mac sends BSS_CHANGED_BEACON_ENABLED when station leaves IBSS. Driver should indicate uCode to not to send anything on receiving this notification. Functionality to indicate uCode is duplicated across two notifications so created a common function called iwl_set_no_assoc. Fix the issue at http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2133. Signed-off-by: Abhijeet Kolekar Tested-by: Johannes Berg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 45 ++++++++++++++----------- 1 file changed, 25 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 574d36658702..5461f105bd2d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2344,6 +2344,21 @@ static void iwl_ht_conf(struct iwl_priv *priv, IWL_DEBUG_MAC80211(priv, "leave\n"); } +static inline void iwl_set_no_assoc(struct iwl_priv *priv) +{ + priv->assoc_id = 0; + iwl_led_disassociate(priv); + /* + * inform the ucode that there is no longer an + * association and that no more packets should be + * sent + */ + priv->staging_rxon.filter_flags &= + ~RXON_FILTER_ASSOC_MSK; + priv->staging_rxon.assoc_id = 0; + iwlcore_commit_rxon(priv); +} + #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) void iwl_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -2475,20 +2490,8 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; if (!iwl_is_rfkill(priv)) priv->cfg->ops->lib->post_associate(priv); - } else { - priv->assoc_id = 0; - iwl_led_disassociate(priv); - - /* - * inform the ucode that there is no longer an - * association and that no more packets should be - * send - */ - priv->staging_rxon.filter_flags &= - ~RXON_FILTER_ASSOC_MSK; - priv->staging_rxon.assoc_id = 0; - iwlcore_commit_rxon(priv); - } + } else + iwl_set_no_assoc(priv); } if (changes && iwl_is_associated(priv) && priv->assoc_id) { @@ -2503,12 +2506,14 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, } } - if ((changes & BSS_CHANGED_BEACON_ENABLED) && - vif->bss_conf.enable_beacon) { - memcpy(priv->staging_rxon.bssid_addr, - bss_conf->bssid, ETH_ALEN); - memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); - iwlcore_config_ap(priv); + if (changes & BSS_CHANGED_BEACON_ENABLED) { + if (vif->bss_conf.enable_beacon) { + memcpy(priv->staging_rxon.bssid_addr, + bss_conf->bssid, ETH_ALEN); + memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); + iwlcore_config_ap(priv); + } else + iwl_set_no_assoc(priv); } mutex_unlock(&priv->mutex); From 48bca0e9c7f428dc75ea2a9c37601e6cb47dae6f Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Fri, 8 Jan 2010 15:23:03 -0700 Subject: [PATCH 0553/1626] OMAP2: remove duplicated #include Remove duplicated #include('s) in arch/arm/mach-omap2/clock34xx.c arch/arm/mach-omap2/io.c Signed-off-by: Huang Weiyi Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock34xx.c | 1 - arch/arm/mach-omap2/io.c | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index ded32364f32b..d4217b93e10b 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -34,7 +34,6 @@ #include #include -#include #include "clock.h" #include "clock34xx.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index a8749e8017b9..ac9ea6007f27 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include "clock.h" From 98bb155130aca96f26b12b50a38db806a0021e59 Mon Sep 17 00:00:00 2001 From: Abhijit Pagare Date: Fri, 8 Jan 2010 15:23:04 -0700 Subject: [PATCH 0554/1626] ARM: OMAP3: PM: Fix the Invalid CM_CLKSTCTRL reg access. In OMAP2/3 some of the clock-domains which did not have control facility were being falsely written to and read using the CM_CLKSTCTRL register though it did not exist for them. One check is added to remove this flaw. Signed-off-by: Abhijit Pagare Signed-off-by: Paul Walmsley Cc: Benoit Cousson Cc: Rajendra Nayak --- arch/arm/mach-omap2/clockdomain.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 1a45ed1e8ba1..dd285f001467 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -559,7 +559,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) * downstream clocks for debugging purposes? */ - if (!clkdm || !clk) + if (!clkdm || !clk || !clkdm->clktrctrl_mask) return -EINVAL; if (atomic_inc_return(&clkdm->usecount) > 1) @@ -610,7 +610,7 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) * downstream clocks for debugging purposes? */ - if (!clkdm || !clk) + if (!clkdm || !clk || !clkdm->clktrctrl_mask) return -EINVAL; #ifdef DEBUG From 7adb9987177f7aa269505ef65f4b4ed84bbc17b5 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 8 Jan 2010 15:23:05 -0700 Subject: [PATCH 0555/1626] OMAP2xxx IO mapping: mark DSP mappings as being 2420-only Out of the three major OMAP2 chip types, OMAP2420, OMAP2430, and OMAP3430, we only map the IVA on OMAP2420. The memory mapping is not shared between OMAP2420 and OMAP2430, so it is inappropriate to label those macros as '24XX'; this patch changes them to '2420'. Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/io.c | 18 +++++++-------- arch/arm/plat-omap/include/plat/io.h | 33 +++++++++++----------------- arch/arm/plat-omap/io.c | 12 +++++----- 3 files changed, 28 insertions(+), 35 deletions(-) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index ac9ea6007f27..5a7996402c53 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -72,21 +72,21 @@ static struct map_desc omap24xx_io_desc[] __initdata = { #ifdef CONFIG_ARCH_OMAP2420 static struct map_desc omap242x_io_desc[] __initdata = { { - .virtual = DSP_MEM_24XX_VIRT, - .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS), - .length = DSP_MEM_24XX_SIZE, + .virtual = DSP_MEM_2420_VIRT, + .pfn = __phys_to_pfn(DSP_MEM_2420_PHYS), + .length = DSP_MEM_2420_SIZE, .type = MT_DEVICE }, { - .virtual = DSP_IPI_24XX_VIRT, - .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS), - .length = DSP_IPI_24XX_SIZE, + .virtual = DSP_IPI_2420_VIRT, + .pfn = __phys_to_pfn(DSP_IPI_2420_PHYS), + .length = DSP_IPI_2420_SIZE, .type = MT_DEVICE }, { - .virtual = DSP_MMU_24XX_VIRT, - .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS), - .length = DSP_MMU_24XX_SIZE, + .virtual = DSP_MMU_2420_VIRT, + .pfn = __phys_to_pfn(DSP_MMU_2420_PHYS), + .length = DSP_MMU_2420_SIZE, .type = MT_DEVICE }, }; diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index 7e5319f907d1..7d6f45f3e9a3 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -122,16 +122,18 @@ #define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP243X_SMS_SIZE SZ_1M -/* DSP */ -#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */ -#define DSP_MEM_24XX_VIRT 0xe0000000 -#define DSP_MEM_24XX_SIZE 0x28000 -#define DSP_IPI_24XX_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */ -#define DSP_IPI_24XX_VIRT 0xe1000000 -#define DSP_IPI_24XX_SIZE SZ_4K -#define DSP_MMU_24XX_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */ -#define DSP_MMU_24XX_VIRT 0xe2000000 -#define DSP_MMU_24XX_SIZE SZ_4K +/* 2420 IVA */ +#define DSP_MEM_2420_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */ +#define DSP_MEM_2420_VIRT 0xe0000000 +#define DSP_MEM_2420_SIZE 0x28000 +#define DSP_IPI_2420_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */ +#define DSP_IPI_2420_VIRT 0xe1000000 +#define DSP_IPI_2420_SIZE SZ_4K +#define DSP_MMU_2420_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */ +#define DSP_MMU_2420_VIRT 0xe2000000 +#define DSP_MMU_2420_SIZE SZ_4K + +/* 2430 IVA2.1 - currently unmapped */ /* * ---------------------------------------------------------------------------- @@ -182,16 +184,7 @@ #define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP343X_SDRC_SIZE SZ_1M -/* DSP */ -#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */ -#define DSP_MEM_34XX_VIRT 0xe0000000 -#define DSP_MEM_34XX_SIZE 0x28000 -#define DSP_IPI_34XX_PHYS OMAP34XX_DSP_IPI_BASE /* 0x59000000 */ -#define DSP_IPI_34XX_VIRT 0xe1000000 -#define DSP_IPI_34XX_SIZE SZ_4K -#define DSP_MMU_34XX_PHYS OMAP34XX_DSP_MMU_BASE /* 0x5a000000 */ -#define DSP_MMU_34XX_VIRT 0xe2000000 -#define DSP_MMU_34XX_SIZE SZ_4K +/* 3430 IVA - currently unmapped */ /* * ---------------------------------------------------------------------------- diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index 11f5d7961c73..0cfd54f519c4 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -66,12 +66,12 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT); } if (cpu_is_omap2420()) { - if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE)) - return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT); - if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE)) - return XLATE(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE); - if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE)) - return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT); + if (BETWEEN(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_SIZE)) + return XLATE(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_VIRT); + if (BETWEEN(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE)) + return XLATE(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE); + if (BETWEEN(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_SIZE)) + return XLATE(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_VIRT); } if (cpu_is_omap2430()) { if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE)) From 51e888d705d29824aebb22ddf8a1f478083386e7 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 8 Jan 2010 15:23:06 -0700 Subject: [PATCH 0556/1626] OMAP2420 IO mapping: move IVA mapping virtual address out of vmalloc space Commit 10db25fea4c11661070b97832b8cc3d2af495092 causes the following kernel messages during N800 boot (and presumably all other 2420 boards): [ 0.000000] BUG: mapping for 0x58000000 at 0xe0000000 overlaps vmalloc space [ 0.000000] BUG: mapping for 0x59000000 at 0xe1000000 overlaps vmalloc space [ 0.000000] BUG: mapping for 0x5a000000 at 0xe2000000 overlaps vmalloc space Fix by remapping the IVA memory areas somewhere outside vmalloc space. Signed-off-by: Paul Walmsley Cc: Santosh Shilimkar Cc: Tony Lindgren --- arch/arm/plat-omap/include/plat/io.h | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index 7d6f45f3e9a3..a3e7b471bcba 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -123,14 +123,17 @@ #define OMAP243X_SMS_SIZE SZ_1M /* 2420 IVA */ -#define DSP_MEM_2420_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */ -#define DSP_MEM_2420_VIRT 0xe0000000 +#define DSP_MEM_2420_PHYS OMAP2420_DSP_MEM_BASE + /* 0x58000000 --> 0xfc100000 */ +#define DSP_MEM_2420_VIRT 0xfc100000 #define DSP_MEM_2420_SIZE 0x28000 -#define DSP_IPI_2420_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */ -#define DSP_IPI_2420_VIRT 0xe1000000 +#define DSP_IPI_2420_PHYS OMAP2420_DSP_IPI_BASE + /* 0x59000000 --> 0xfc128000 */ +#define DSP_IPI_2420_VIRT 0xfc128000 #define DSP_IPI_2420_SIZE SZ_4K -#define DSP_MMU_2420_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */ -#define DSP_MMU_2420_VIRT 0xe2000000 +#define DSP_MMU_2420_PHYS OMAP2420_DSP_MMU_BASE + /* 0x5a000000 --> 0xfc129000 */ +#define DSP_MMU_2420_VIRT 0xfc129000 #define DSP_MMU_2420_SIZE SZ_4K /* 2430 IVA2.1 - currently unmapped */ From 9b5bc5fa4b68fe2f51a5197786a8b5df82d1b8bf Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 8 Jan 2010 15:23:06 -0700 Subject: [PATCH 0557/1626] OMAP3: clock: add clockdomains for UART1 & 2 UART1 & 2 were missing clockdomains resulting in broken omap_hwmod init for these devices. Signed-off-by: Kevin Hilman Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock34xx_data.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c index 8bdcc9cc7f9a..c60b19a27232 100644 --- a/arch/arm/mach-omap2/clock34xx_data.c +++ b/arch/arm/mach-omap2/clock34xx_data.c @@ -1500,6 +1500,7 @@ static struct clk uart2_fck = { .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_UART2_SHIFT, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1509,6 +1510,7 @@ static struct clk uart1_fck = { .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_UART1_SHIFT, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; From 073463ca4011d4f6f8e2334273f3b062b2b19b85 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 8 Jan 2010 15:23:07 -0700 Subject: [PATCH 0558/1626] OMAP3 clock: McBSP 2, 3, 4 functional clock parent is PER_96M_FCLK, not CORE_96M_FCLK The correct parent of the McBSP 2, 3, and 4 functional clocks is PER_96M_FCLK, not CORE_96M_FCLK. Fix this in the OMAP clock tree. Reported by Nicole Chalhoub . Signed-off-by: Paul Walmsley Cc: Nicole Chalhoub --- arch/arm/mach-omap2/clock34xx_data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c index c60b19a27232..7eea9fb09e74 100644 --- a/arch/arm/mach-omap2/clock34xx_data.c +++ b/arch/arm/mach-omap2/clock34xx_data.c @@ -2747,7 +2747,7 @@ static struct clk mcbsp4_ick = { }; static const struct clksel mcbsp_234_clksel[] = { - { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, + { .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates }, { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, { .parent = NULL } }; From 3e3ee1560daaf09bb5dbe3afd35ca2f75e2e116a Mon Sep 17 00:00:00 2001 From: Tuukka Toivonen Date: Fri, 8 Jan 2010 15:23:08 -0700 Subject: [PATCH 0559/1626] OMAP3 clock: Add capability to change rate of dpll4_m5_ck MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add necessary definitions to clock framework to allow changing dpll4_m5_ck rate. This is used by the camera code. Signed-off-by: Jouni Högander Signed-off-by: Tuukka Toivonen Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock34xx_data.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c index 7eea9fb09e74..c6031d74d6f6 100644 --- a/arch/arm/mach-omap2/clock34xx_data.c +++ b/arch/arm/mach-omap2/clock34xx_data.c @@ -776,6 +776,8 @@ static struct clk dpll4_m5_ck = { .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, .clksel = div16_dpll4_clksel, .clkdm_name = "dpll4_clkdm", + .set_rate = &omap2_clksel_set_rate, + .round_rate = &omap2_clksel_round_rate, .recalc = &omap2_clksel_recalc, }; From d1e624982194e617b6f5c7d61305a3e8d9078952 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 8 Jan 2010 15:23:09 -0700 Subject: [PATCH 0560/1626] OMAP clock: remove incorrect EXPORT_SYMBOL()s The only symbols that should be exported are symbols that are to be called from loadable kernel modules, e.g., device drivers. In the context of plat-omap/clock.c, these should only be the Linux clock interface symbols as defined by include/linux/clk.h. Core code doesn't need these symbols to be exported. Also, clean up an old comment while here. Signed-off-by: Paul Walmsley --- arch/arm/plat-omap/clock.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 89cafc937249..a64d84c3d80e 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -36,10 +36,6 @@ static struct clk_functions *arch_clock; * Standard clock functions defined in include/linux/clk.h *-------------------------------------------------------------------------*/ -/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since - * clock framework is not up , it is defined here to avoid rework in - * every driver. Also dummy prcm reset function is added */ - int clk_enable(struct clk *clk) { unsigned long flags; @@ -305,7 +301,6 @@ void clk_enable_init_clocks(void) clk_enable(clkp); } } -EXPORT_SYMBOL(clk_enable_init_clocks); /* * Low level helpers @@ -334,7 +329,6 @@ void clk_init_cpufreq_table(struct cpufreq_frequency_table **table) arch_clock->clk_init_cpufreq_table(table); spin_unlock_irqrestore(&clockfw_lock, flags); } -EXPORT_SYMBOL(clk_init_cpufreq_table); #endif /*-------------------------------------------------------------------------*/ From e8ae6b6e4dec43db4ae6fc67550fe63f16247667 Mon Sep 17 00:00:00 2001 From: Cory Maccarrone Date: Fri, 8 Jan 2010 15:23:10 -0700 Subject: [PATCH 0561/1626] OMAP1 clock: Add missing clocks for OMAP 7xx This change adds in some missing clocks that were needed as a result of 526505... (OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c). Prior to this, it was just assumed that these clocks existed for all devices, and it was used directly instead of calling it out with a clock_get call or similar. So, not having the CK_7XX meant these clocks weren't being used anymore for omap 7xx devices, which broke things badly. Signed-off-by: Cory Maccarrone [paul@pwsan.com: commit message edited] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap1/clock_data.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index ab995a9c606c..31fba077142c 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -599,7 +599,7 @@ static struct clk i2c_ick = { static struct omap_clk omap_clks[] = { /* non-ULPD clocks */ CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310 | CK_7XX), /* CK_GEN1 clocks */ CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), @@ -627,7 +627,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), - CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), From 9b11769f998e138cbc89ba822316aa3e63912856 Mon Sep 17 00:00:00 2001 From: Cory Maccarrone Date: Fri, 8 Jan 2010 15:23:14 -0700 Subject: [PATCH 0562/1626] OMAP1 clock: remove __initdata from struct clk_functions to prevent crash Commit 52650505fbf3a6ab851c801f54e73e76c55ab8da added an __initdata decoration to the structure containing the clk_enable and clk_disable functions. Once init data was freed, these pointers went to null, and the next enable or disable call caused the kernel to crash. This change removes this decoration. Signed-off-by: Cory Maccarrone [paul@pwsan.com: patch manually split and commit message edited] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap1/clock_data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 31fba077142c..8a85bbb6bb00 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -674,7 +674,7 @@ static struct omap_clk omap_clks[] = { * init */ -static struct clk_functions omap1_clk_functions __initdata = { +static struct clk_functions omap1_clk_functions = { .clk_enable = omap1_clk_enable, .clk_disable = omap1_clk_disable, .clk_round_rate = omap1_clk_round_rate, From 19fe458310915a216bbba32a210b6f29ac7c929f Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 8 Jan 2010 15:23:15 -0700 Subject: [PATCH 0563/1626] OMAP2xxx clock: clk2xxx.c doesn't compile if CPUFREQ is enabled if we enable CPUFREQ we can't build omap2 for two reasons, one of them is fixed by the patch below. It's failing because the __must_be_array() check in ARRAY_SIZE() is failing and printing the following message: arch/arm/mach-omap2/clock2xxx.c:453: error: negative width in bit-field '' Signed-off-by: Felipe Balbi [paul@pwsan.com: commit message updated; changed rate variable name] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock2xxx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index d0e3fb7f9298..ce6742f7894a 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -455,12 +455,15 @@ static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)]; void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) { struct prcm_config *prcm; + long sys_ck_rate; int i = 0; + sys_ck_rate = clk_get_rate(sclk); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { if (!(prcm->flags & cpu_mask)) continue; - if (prcm->xtal_speed != sys_ck.rate) + if (prcm->xtal_speed != sys_ck_rate) continue; /* don't put bypass rates in table */ From ca6eccb31ef63722b35ea695f75089adeec319d7 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 8 Jan 2010 15:23:15 -0700 Subject: [PATCH 0564/1626] OMAP2xxx OPP: clean up comments in OPP data Revise some of the comments in the OMAP2xxx OPP data for clarity. Signed-off-by: Paul Walmsley Cc: Richard Woodruff --- arch/arm/mach-omap2/opp2420_data.c | 38 ++++++++++++++++-------------- arch/arm/mach-omap2/opp2430_data.c | 30 +++++++++++------------ 2 files changed, 35 insertions(+), 33 deletions(-) diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c index 126a9396b3a8..e6dda694fd5c 100644 --- a/arch/arm/mach-omap2/opp2420_data.c +++ b/arch/arm/mach-omap2/opp2420_data.c @@ -9,45 +9,47 @@ * The OMAP2 processor can be run at several discrete 'PRCM configurations'. * These configurations are characterized by voltage and speed for clocks. * The device is only validated for certain combinations. One way to express - * these combinations is via the 'ratio's' which the clocks operate with + * these combinations is via the 'ratios' which the clocks operate with * respect to each other. These ratio sets are for a given voltage/DPLL - * setting. All configurations can be described by a DPLL setting and a ratio - * There are 3 ratio sets for the 2430 and X ratio sets for 2420. - * - * 2430 differs from 2420 in that there are no more phase synchronizers used. - * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs - * 2430 (iva2.1, NOdsp, mdm) + * setting. All configurations can be described by a DPLL setting and a ratio. * * XXX Missing voltage data. + * XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810) * * THe format described in this file is deprecated. Once a reasonable * OPP API exists, the data in this file should be converted to use it. * * This is technically part of the OMAP2xxx clock code. + * + * Considerable work is still needed to fully support dynamic frequency + * changes on OMAP2xxx-series chips. Readers interested in such a + * project are encouraged to review the Maemo Diablo RX-34 and RX-44 + * kernel source at: + * http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/ */ #include "opp2xxx.h" #include "sdrc.h" #include "clock.h" -/*------------------------------------------------------------------------- - * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. +/* + * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated. * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, * CM_CLKSEL2_PLL, CM_CLKSEL_MDM * - * Filling in table based on H4 boards and 2430-SDPs variants available. - * There are quite a few more rates combinations which could be defined. + * Filling in table based on H4 boards available. There are quite a + * few more rate combinations which could be defined. * - * When multiple values are defined the start up will try and choose the - * fastest one. If a 'fast' value is defined, then automatically, the /2 - * one should be included as it can be used. Generally having more that - * one fast set does not make sense, as static timings need to be changed - * to change the set. The exception is the bypass setting which is - * availble for low power bypass. + * When multiple values are defined the start up will try and choose + * the fastest one. If a 'fast' value is defined, then automatically, + * the /2 one should be included as it can be used. Generally having + * more than one fast set does not make sense, as static timings need + * to be changed to change the set. The exception is the bypass + * setting which is available for low power bypass. * * Note: This table needs to be sorted, fastest to slowest. - *-------------------------------------------------------------------------*/ + **/ const struct prcm_config omap2420_rate_table[] = { /* PRCM I - FAST */ {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c index edb81672c844..1b9596ae201e 100644 --- a/arch/arm/mach-omap2/opp2430_data.c +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -1,5 +1,5 @@ /* - * opp2420_data.c - old-style "OPP" table for OMAP2420 + * opp2430_data.c - old-style "OPP" table for OMAP2430 * * Copyright (C) 2005-2009 Texas Instruments, Inc. * Copyright (C) 2004-2009 Nokia Corporation @@ -9,16 +9,16 @@ * The OMAP2 processor can be run at several discrete 'PRCM configurations'. * These configurations are characterized by voltage and speed for clocks. * The device is only validated for certain combinations. One way to express - * these combinations is via the 'ratio's' which the clocks operate with + * these combinations is via the 'ratios' which the clocks operate with * respect to each other. These ratio sets are for a given voltage/DPLL - * setting. All configurations can be described by a DPLL setting and a ratio - * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * setting. All configurations can be described by a DPLL setting and a ratio. * * 2430 differs from 2420 in that there are no more phase synchronizers used. * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs * 2430 (iva2.1, NOdsp, mdm) * * XXX Missing voltage data. + * XXX Missing 19.2MHz sys_clk rate sets. * * THe format described in this file is deprecated. Once a reasonable * OPP API exists, the data in this file should be converted to use it. @@ -30,24 +30,24 @@ #include "sdrc.h" #include "clock.h" -/*------------------------------------------------------------------------- - * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. +/* + * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated. * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, * CM_CLKSEL2_PLL, CM_CLKSEL_MDM * - * Filling in table based on H4 boards and 2430-SDPs variants available. - * There are quite a few more rates combinations which could be defined. + * Filling in table based on 2430-SDPs variants available. There are + * quite a few more rate combinations which could be defined. * - * When multiple values are defined the start up will try and choose the - * fastest one. If a 'fast' value is defined, then automatically, the /2 - * one should be included as it can be used. Generally having more that - * one fast set does not make sense, as static timings need to be changed - * to change the set. The exception is the bypass setting which is - * availble for low power bypass. + * When multiple values are defined the start up will try and choose + * the fastest one. If a 'fast' value is defined, then automatically, + * the /2 one should be included as it can be used. Generally having + * more than one fast set does not make sense, as static timings need + * to be changed to change the set. The exception is the bypass + * setting which is available for low power bypass. * * Note: This table needs to be sorted, fastest to slowest. - *-------------------------------------------------------------------------*/ + */ const struct prcm_config omap2430_rate_table[] = { /* PRCM #4 - ratio2 (ES2.1) - FAST */ {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */ From 4e37c10d8a721b19933491df7af296aac9281004 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 8 Jan 2010 15:23:16 -0700 Subject: [PATCH 0565/1626] OMAP clock/CPUFreq: add clk_exit_cpufreq_table() A subsequent patch adds code on OMAP2xxx to dynamically allocate the CPUFreq frequency table in clk_init_cpufreq_table(), so for it to avoid a leak, it will need a corresponding function to free the memory. This patch adds clk_exit_cpufreq_table() with generic code to call a chip-specific variant inside the clockfw_lock spinlock via struct clk_functions. Signed-off-by: Paul Walmsley --- arch/arm/plat-omap/clock.c | 10 ++++++++++ arch/arm/plat-omap/cpu-omap.c | 1 + arch/arm/plat-omap/include/plat/clock.h | 2 ++ 3 files changed, 13 insertions(+) diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index a64d84c3d80e..d9f8c844c385 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -329,6 +329,16 @@ void clk_init_cpufreq_table(struct cpufreq_frequency_table **table) arch_clock->clk_init_cpufreq_table(table); spin_unlock_irqrestore(&clockfw_lock, flags); } + +void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) +{ + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_exit_cpufreq_table) + arch_clock->clk_exit_cpufreq_table(table); + spin_unlock_irqrestore(&clockfw_lock, flags); +} #endif /*-------------------------------------------------------------------------*/ diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index f8ddbdd8b076..6d3d33360056 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -134,6 +134,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy) static int omap_cpu_exit(struct cpufreq_policy *policy) { + clk_exit_cpufreq_table(&freq_table); clk_put(mpu_clk); return 0; } diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 309b6d1dccdb..94fe2a0ce40a 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -119,6 +119,7 @@ struct clk_functions { void (*clk_disable_unused)(struct clk *clk); #ifdef CONFIG_CPU_FREQ void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **); + void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **); #endif }; @@ -135,6 +136,7 @@ extern unsigned long followparent_recalc(struct clk *clk); extern void clk_enable_init_clocks(void); #ifdef CONFIG_CPU_FREQ extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); +extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); #endif extern const struct clkops clkops_null; From cdf1a915569ea9c3f6b9b4ef48a189d531d3954c Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 8 Jan 2010 15:23:17 -0700 Subject: [PATCH 0566/1626] OMAP2 clock: dynamically allocate CPUFreq frequency table Dynamically allocate the CPUFreq frequency table on OMAP2xxx chips. This fixes some compilation problems, since the kernel may not know what chip it is running on until boot-time. This also reduces the size of the CPUFreq frequency table. Problem originally reported by Felipe Balbi . Thanks also for comments on the patch from Felipe and Kevin. Signed-off-by: Paul Walmsley Cc: Felipe Balbi Cc: Kevin Hilman --- arch/arm/mach-omap2/clock2xxx.c | 52 ++++++++++++++++++++++++++++----- 1 file changed, 44 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index ce6742f7894a..5420356eb407 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -449,17 +449,52 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) #ifdef CONFIG_CPU_FREQ /* * Walk PRCM rate table and fillout cpufreq freq_table + * XXX This should be replaced by an OPP layer in the near future */ -static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)]; +static struct cpufreq_frequency_table *freq_table; void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) { - struct prcm_config *prcm; + const struct prcm_config *prcm; long sys_ck_rate; int i = 0; + int tbl_sz = 0; sys_ck_rate = clk_get_rate(sclk); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck_rate) + continue; + + /* don't put bypass rates in table */ + if (prcm->dpll_speed == prcm->xtal_speed) + continue; + + tbl_sz++; + } + + /* + * XXX Ensure that we're doing what CPUFreq expects for this error + * case and the following one + */ + if (tbl_sz == 0) { + pr_warning("%s: no matching entries in rate_table\n", + __func__); + return; + } + + /* Include the CPUFREQ_TABLE_END terminator entry */ + tbl_sz++; + + freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz, + GFP_ATOMIC); + if (!freq_table) { + pr_err("%s: could not kzalloc frequency table\n", __func__); + return; + } + for (prcm = rate_table; prcm->mpu_speed; prcm++) { if (!(prcm->flags & cpu_mask)) continue; @@ -475,17 +510,17 @@ void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) i++; } - if (i == 0) { - printk(KERN_WARNING "%s: failed to initialize frequency " - "table\n", __func__); - return; - } - freq_table[i].index = i; freq_table[i].frequency = CPUFREQ_TABLE_END; *table = &freq_table[0]; } + +void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) +{ + kfree(freq_table); +} + #endif struct clk_functions omap2_clk_functions = { @@ -497,6 +532,7 @@ struct clk_functions omap2_clk_functions = { .clk_disable_unused = omap2_clk_disable_unused, #ifdef CONFIG_CPU_FREQ .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, + .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table, #endif }; From 50f411e34d623efbf4e4b4b0c1a4a20e04c5cc9e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 9 Jan 2010 00:45:33 +0100 Subject: [PATCH 0567/1626] DRM / i915: Fix resume regression on MSI Wind U100 w/o KMS Commit cbda12d77ea590082edb6d30bd342a67ebc459e0 (drm/i915: implement new pm ops for i915), among other things, removed the .suspend and .resume pointers from the struct drm_driver object in i915_drv.c, which broke resume without KMS on my MSI Wind U100. Fix this by reverting that part of commit cbda12d77ea59. [ The DRM layer will not use the class-specific suspend/resume functions if the driver is marked MODESET-aware, and conversely it will not register the PCI device if the drievr isn't so marked, so you always end up with _either_ the drm-class suspend/resume _or_ the PCI layer PM functionality, never both. - Linus ] Signed-off-by: Rafael J. Wysocki Acked-by: Jesse Barnes Signed-off-by: Linus Torvalds --- drivers/gpu/drm/i915/i915_drv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 2ffffd7ae09a..be631cc3e4dc 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -464,6 +464,8 @@ static struct drm_driver driver = { .lastclose = i915_driver_lastclose, .preclose = i915_driver_preclose, .postclose = i915_driver_postclose, + .suspend = i915_suspend, + .resume = i915_resume, .device_is_agp = i915_driver_device_is_agp, .enable_vblank = i915_enable_vblank, .disable_vblank = i915_disable_vblank, From f892027c02f8d985455ba239ce280ac13b68a7fa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Peter=20H=C3=BCwe?= Date: Sat, 9 Jan 2010 13:46:08 +0100 Subject: [PATCH 0568/1626] ARM: 5870/1: arch/arm: Fix build failure for defconfigs without CONFIG_ISA_DMA_API set A lot of ARM-defconfigs (those without CONFIG_ISA_DMA_API set) fail to build [1][2][3] due to the changes of the patch [PATCH] PCI: Clean up build for CONFIG_PCI_QUIRKS unset by Rafael J. Wysocki (Sat, 2 Jan 2010 22:57:24 +0100) [4] as the referenced variable 'isa_dma_bridge_buggy' in asm/dma.h is enclosed by the CONFIG_ISA_DMA_API conditional all configs without this setting fail to build. I'm not sure wether moving the condition is the right way to solve the issue, but atleast it fixes the issue :) References: [1] http://kisskb.ellerman.id.au/kisskb/buildresult/1983354/ [2] http://kisskb.ellerman.id.au/kisskb/buildresult/1983333/ [3] http://kisskb.ellerman.id.au/kisskb/buildresult/1983337/ [4] http://lkml.org/lkml/2010/1/2/102 Signed-off-by: Peter Huewe Signed-off-by: Russell King --- arch/arm/include/asm/dma.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index 7edf3536df24..ca51143f97f1 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -138,12 +138,12 @@ extern int get_dma_residue(unsigned int chan); #define NO_DMA 255 #endif +#endif /* CONFIG_ISA_DMA_API */ + #ifdef CONFIG_PCI extern int isa_dma_bridge_buggy; #else #define isa_dma_bridge_buggy (0) #endif -#endif /* CONFIG_ISA_DMA_API */ - #endif /* __ASM_ARM_DMA_H */ From 657b366a2827f35c020712e46696e56ab116d3c7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Peter=20H=C3=BCwe?= Date: Sat, 9 Jan 2010 13:46:57 +0100 Subject: [PATCH 0569/1626] ARM: 5871/1: arch/arm: Fix build failure for lpd7a404_defconfig caused by missing includes This patch fixes a build failure [1] due to missing includes This should make the arm tree build again with lpd7a404_defconfig References: http://kisskb.ellerman.id.au/kisskb/buildresult/1983329/ Signed-off-by: Peter Huewe Signed-off-by: Russell King --- arch/arm/mach-lh7a40x/clocks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c index fcaf876f19b6..0651f96653f9 100644 --- a/arch/arm/mach-lh7a40x/clocks.c +++ b/arch/arm/mach-lh7a40x/clocks.c @@ -10,6 +10,8 @@ #include #include #include +#include +#include struct module; From dd38d6889dc5dae2014d9eac72fae32f477f294e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 9 Jan 2010 00:13:36 -0800 Subject: [PATCH 0570/1626] Input: xbox - do not use GFP_KERNEL under spinlock xbox_play_effect() is called while holding dev->event_lock with interrupts disabled and thus may not use GFP_KERNEL when submitting urbs. Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 482cb1204e43..8a28fb7846dc 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -446,7 +446,7 @@ static void xpad_irq_in(struct urb *urb) } exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) err ("%s - usb_submit_urb failed with result %d", __func__, retval); @@ -571,7 +571,7 @@ static int xpad_play_effect(struct input_dev *dev, void *data, xpad->odata[6] = 0x00; xpad->odata[7] = 0x00; xpad->irq_out->transfer_buffer_length = 8; - usb_submit_urb(xpad->irq_out, GFP_KERNEL); + usb_submit_urb(xpad->irq_out, GFP_ATOMIC); } return 0; From 62a8c5bcb547c0aca1c3af810695dfb9b25e5351 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Sun, 10 Jan 2010 09:21:53 +0100 Subject: [PATCH 0571/1626] ARM: 5872/1: ARM: include needed linux/cpu.h in asm/cpu.h The file arch/arm/include/asm/cpu.h needs to include 'linux/cpu.h' to meet its dependency. Otherwise when using "struct cpuinfo_arm" and including just 'asm/cpu.h' throws below error - arch/arm/include/asm/cpu.h:16: error: field 'cpu' has incomplete type To fix this otherway, one can also include both linux/cpu.h and asm/cpu.h but it shoudn't be that way. So this patch fixes this by including the linux/cpu.h in asm/cpu.h, so that including alone asm/cpu.h is enough. Signed-off-by: Santosh Shilimkar Signed-off-by: Russell King --- arch/arm/include/asm/cpu.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/include/asm/cpu.h b/arch/arm/include/asm/cpu.h index 634b2d7c612a..793968173bef 100644 --- a/arch/arm/include/asm/cpu.h +++ b/arch/arm/include/asm/cpu.h @@ -11,6 +11,7 @@ #define __ASM_ARM_CPU_H #include +#include struct cpuinfo_arm { struct cpu cpu; From af9a75dd1a1f8a9aa406466cc8bb16208120488a Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Sat, 9 Jan 2010 01:22:29 -0500 Subject: [PATCH 0572/1626] ALSA: ac97: Add Dell Dimension 2400 to Headphone/Line Jack Sense blacklist This model needs both 'Headphone Jack Sense' and 'Line Jack Sense' muted for audible playback, so just add it to the ad1981 jack sense blacklist. Cc: stable@kernel.org Tested-by: Pete Signed-off-by: Daniel T Chen Signed-off-by: Jaroslav Kysela --- sound/pci/ac97/ac97_patch.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index 139cf3b2b9d7..d9266bae2849 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -1870,6 +1870,7 @@ static unsigned int ad1981_jacks_blacklist[] = { 0x10140554, /* Thinkpad T42p/R50p */ 0x10140567, /* Thinkpad T43p 2668-G7U */ 0x10140581, /* Thinkpad X41-2527 */ + 0x10280160, /* Dell Dimension 2400 */ 0x104380b0, /* Asus A7V8X-MX */ 0x11790241, /* Toshiba Satellite A-15 S127 */ 0x144dc01a, /* Samsung NP-X20C004/SEG */ From c68db7175f4dcb3d5789bb50bea6376fb81f87fe Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Sun, 10 Jan 2010 17:21:14 +0100 Subject: [PATCH 0573/1626] ALSA: ac97: add AC97 STMicroelectronics' codecs Add the STMicroelectronics ST7597 codec and an unknown codec from the same manufacturer found on the Creative SB 128 card (CT4810). Signed-off-by: Krzysztof Helt Signed-off-by: Jaroslav Kysela --- sound/pci/ac97/ac97_codec.c | 10 ++++++++++ sound/pci/ac97/ac97_id.h | 2 ++ 2 files changed, 12 insertions(+) diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index c11920623009..a7630e9edf8a 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -83,6 +83,7 @@ static const struct ac97_codec_id snd_ac97_codec_id_vendors[] = { { 0x4e534300, 0xffffff00, "National Semiconductor", NULL, NULL }, { 0x50534300, 0xffffff00, "Philips", NULL, NULL }, { 0x53494c00, 0xffffff00, "Silicon Laboratory", NULL, NULL }, +{ 0x53544d00, 0xffffff00, "STMicroelectronics", NULL, NULL }, { 0x54524100, 0xffffff00, "TriTech", NULL, NULL }, { 0x54584e00, 0xffffff00, "Texas Instruments", NULL, NULL }, { 0x56494100, 0xffffff00, "VIA Technologies", NULL, NULL }, @@ -161,6 +162,7 @@ static const struct ac97_codec_id snd_ac97_codec_ids[] = { { 0x4e534350, 0xffffffff, "LM4550", patch_lm4550, NULL }, // volume wrap fix { 0x50534304, 0xffffffff, "UCB1400", patch_ucb1400, NULL }, { 0x53494c20, 0xffffffe0, "Si3036,8", mpatch_si3036, mpatch_si3036, AC97_MODEM_PATCH }, +{ 0x53544d02, 0xffffffff, "ST7597", NULL, NULL }, { 0x54524102, 0xffffffff, "TR28022", NULL, NULL }, { 0x54524103, 0xffffffff, "TR28023", NULL, NULL }, { 0x54524106, 0xffffffff, "TR28026", NULL, NULL }, @@ -213,6 +215,14 @@ static int snd_ac97_valid_reg(struct snd_ac97 *ac97, unsigned short reg) { /* filter some registers for buggy codecs */ switch (ac97->id) { + case AC97_ID_ST_AC97_ID4: + if (reg == 0x08) + return 0; + /* fall through */ + case AC97_ID_ST7597: + if (reg == 0x22 || reg == 0x7a) + return 1; + /* fall through */ case AC97_ID_AK4540: case AC97_ID_AK4542: if (reg <= 0x1c || reg == 0x20 || reg == 0x26 || reg >= 0x7c) diff --git a/sound/pci/ac97/ac97_id.h b/sound/pci/ac97/ac97_id.h index c129492c82b3..d603147c4a96 100644 --- a/sound/pci/ac97/ac97_id.h +++ b/sound/pci/ac97/ac97_id.h @@ -62,3 +62,5 @@ #define AC97_ID_CM9761_78 0x434d4978 #define AC97_ID_CM9761_82 0x434d4982 #define AC97_ID_CM9761_83 0x434d4983 +#define AC97_ID_ST7597 0x53544d02 +#define AC97_ID_ST_AC97_ID4 0x53544d04 From ea9a48881e093a41a79305fb1545ca0794b203dc Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 21 Dec 2009 14:03:03 +0000 Subject: [PATCH 0574/1626] xfs: use DECLARE_EVENT_CLASS Using DECLARE_EVENT_CLASS allows us to to use trace event code instead of duplicating it in the binary. This was not available before 2.6.33 so it had to be done as a separate step once the prerequisite was merged. This only requires changes to xfs_trace.h and the results are rather impressive: hch@brick:~/work/linux-2.6/obj-kvm$ size fs/xfs/xfs.o* text data bss dec hex filename 607732 41884 3616 653232 9f7b0 fs/xfs/xfs.o 1026732 41884 3808 1072424 105d28 fs/xfs/xfs.o.old Signed-off-by: Christoph Hellwig Signed-off-by: Alex Elder --- fs/xfs/linux-2.6/xfs_trace.h | 1145 ++++++++++++++++++---------------- 1 file changed, 599 insertions(+), 546 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_trace.h b/fs/xfs/linux-2.6/xfs_trace.h index d4ded59d2ffe..8cb42b4656fb 100644 --- a/fs/xfs/linux-2.6/xfs_trace.h +++ b/fs/xfs/linux-2.6/xfs_trace.h @@ -33,51 +33,55 @@ struct xfs_dquot; struct xlog_ticket; struct log; -#define DEFINE_ATTR_LIST_EVENT(name) \ -TRACE_EVENT(name, \ - TP_PROTO(struct xfs_attr_list_context *ctx), \ - TP_ARGS(ctx), \ - TP_STRUCT__entry( \ - __field(dev_t, dev) \ - __field(xfs_ino_t, ino) \ - __field(u32, hashval) \ - __field(u32, blkno) \ - __field(u32, offset) \ - __field(void *, alist) \ - __field(int, bufsize) \ - __field(int, count) \ - __field(int, firstu) \ - __field(int, dupcnt) \ - __field(int, flags) \ - ), \ - TP_fast_assign( \ - __entry->dev = VFS_I(ctx->dp)->i_sb->s_dev; \ - __entry->ino = ctx->dp->i_ino; \ - __entry->hashval = ctx->cursor->hashval; \ - __entry->blkno = ctx->cursor->blkno; \ - __entry->offset = ctx->cursor->offset; \ - __entry->alist = ctx->alist; \ - __entry->bufsize = ctx->bufsize; \ - __entry->count = ctx->count; \ - __entry->firstu = ctx->firstu; \ - __entry->flags = ctx->flags; \ - ), \ - TP_printk("dev %d:%d ino 0x%llx cursor h/b/o 0x%x/0x%x/%u dupcnt %u " \ - "alist 0x%p size %u count %u firstu %u flags %d %s", \ - MAJOR(__entry->dev), MINOR(__entry->dev), \ - __entry->ino, \ - __entry->hashval, \ - __entry->blkno, \ - __entry->offset, \ - __entry->dupcnt, \ - __entry->alist, \ - __entry->bufsize, \ - __entry->count, \ - __entry->firstu, \ - __entry->flags, \ - __print_flags(__entry->flags, "|", XFS_ATTR_FLAGS) \ - ) \ +DECLARE_EVENT_CLASS(xfs_attr_list_class, + TP_PROTO(struct xfs_attr_list_context *ctx), + TP_ARGS(ctx), + TP_STRUCT__entry( + __field(dev_t, dev) + __field(xfs_ino_t, ino) + __field(u32, hashval) + __field(u32, blkno) + __field(u32, offset) + __field(void *, alist) + __field(int, bufsize) + __field(int, count) + __field(int, firstu) + __field(int, dupcnt) + __field(int, flags) + ), + TP_fast_assign( + __entry->dev = VFS_I(ctx->dp)->i_sb->s_dev; + __entry->ino = ctx->dp->i_ino; + __entry->hashval = ctx->cursor->hashval; + __entry->blkno = ctx->cursor->blkno; + __entry->offset = ctx->cursor->offset; + __entry->alist = ctx->alist; + __entry->bufsize = ctx->bufsize; + __entry->count = ctx->count; + __entry->firstu = ctx->firstu; + __entry->flags = ctx->flags; + ), + TP_printk("dev %d:%d ino 0x%llx cursor h/b/o 0x%x/0x%x/%u dupcnt %u " + "alist 0x%p size %u count %u firstu %u flags %d %s", + MAJOR(__entry->dev), MINOR(__entry->dev), + __entry->ino, + __entry->hashval, + __entry->blkno, + __entry->offset, + __entry->dupcnt, + __entry->alist, + __entry->bufsize, + __entry->count, + __entry->firstu, + __entry->flags, + __print_flags(__entry->flags, "|", XFS_ATTR_FLAGS) + ) ) + +#define DEFINE_ATTR_LIST_EVENT(name) \ +DEFINE_EVENT(xfs_attr_list_class, name, \ + TP_PROTO(struct xfs_attr_list_context *ctx), \ + TP_ARGS(ctx)) DEFINE_ATTR_LIST_EVENT(xfs_attr_list_sf); DEFINE_ATTR_LIST_EVENT(xfs_attr_list_sf_all); DEFINE_ATTR_LIST_EVENT(xfs_attr_list_leaf); @@ -178,91 +182,99 @@ TRACE_EVENT(xfs_iext_insert, (char *)__entry->caller_ip) ); -#define DEFINE_BMAP_EVENT(name) \ -TRACE_EVENT(name, \ - TP_PROTO(struct xfs_inode *ip, xfs_extnum_t idx, int state, \ - unsigned long caller_ip), \ - TP_ARGS(ip, idx, state, caller_ip), \ - TP_STRUCT__entry( \ - __field(dev_t, dev) \ - __field(xfs_ino_t, ino) \ - __field(xfs_extnum_t, idx) \ - __field(xfs_fileoff_t, startoff) \ - __field(xfs_fsblock_t, startblock) \ - __field(xfs_filblks_t, blockcount) \ - __field(xfs_exntst_t, state) \ - __field(int, bmap_state) \ - __field(unsigned long, caller_ip) \ - ), \ - TP_fast_assign( \ - struct xfs_ifork *ifp = (state & BMAP_ATTRFORK) ? \ - ip->i_afp : &ip->i_df; \ - struct xfs_bmbt_irec r; \ - \ - xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx), &r); \ - __entry->dev = VFS_I(ip)->i_sb->s_dev; \ - __entry->ino = ip->i_ino; \ - __entry->idx = idx; \ - __entry->startoff = r.br_startoff; \ - __entry->startblock = r.br_startblock; \ - __entry->blockcount = r.br_blockcount; \ - __entry->state = r.br_state; \ - __entry->bmap_state = state; \ - __entry->caller_ip = caller_ip; \ - ), \ - TP_printk("dev %d:%d ino 0x%llx state %s idx %ld " \ - "offset %lld block %s count %lld flag %d caller %pf", \ - MAJOR(__entry->dev), MINOR(__entry->dev), \ - __entry->ino, \ - __print_flags(__entry->bmap_state, "|", XFS_BMAP_EXT_FLAGS), \ - (long)__entry->idx, \ - __entry->startoff, \ - xfs_fmtfsblock(__entry->startblock), \ - __entry->blockcount, \ - __entry->state, \ - (char *)__entry->caller_ip) \ +DECLARE_EVENT_CLASS(xfs_bmap_class, + TP_PROTO(struct xfs_inode *ip, xfs_extnum_t idx, int state, + unsigned long caller_ip), + TP_ARGS(ip, idx, state, caller_ip), + TP_STRUCT__entry( + __field(dev_t, dev) + __field(xfs_ino_t, ino) + __field(xfs_extnum_t, idx) + __field(xfs_fileoff_t, startoff) + __field(xfs_fsblock_t, startblock) + __field(xfs_filblks_t, blockcount) + __field(xfs_exntst_t, state) + __field(int, bmap_state) + __field(unsigned long, caller_ip) + ), + TP_fast_assign( + struct xfs_ifork *ifp = (state & BMAP_ATTRFORK) ? + ip->i_afp : &ip->i_df; + struct xfs_bmbt_irec r; + + xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx), &r); + __entry->dev = VFS_I(ip)->i_sb->s_dev; + __entry->ino = ip->i_ino; + __entry->idx = idx; + __entry->startoff = r.br_startoff; + __entry->startblock = r.br_startblock; + __entry->blockcount = r.br_blockcount; + __entry->state = r.br_state; + __entry->bmap_state = state; + __entry->caller_ip = caller_ip; + ), + TP_printk("dev %d:%d ino 0x%llx state %s idx %ld " + "offset %lld block %s count %lld flag %d caller %pf", + MAJOR(__entry->dev), MINOR(__entry->dev), + __entry->ino, + __print_flags(__entry->bmap_state, "|", XFS_BMAP_EXT_FLAGS), + (long)__entry->idx, + __entry->startoff, + xfs_fmtfsblock(__entry->startblock), + __entry->blockcount, + __entry->state, + (char *)__entry->caller_ip) ) +#define DEFINE_BMAP_EVENT(name) \ +DEFINE_EVENT(xfs_bmap_class, name, \ + TP_PROTO(struct xfs_inode *ip, xfs_extnum_t idx, int state, \ + unsigned long caller_ip), \ + TP_ARGS(ip, idx, state, caller_ip)) DEFINE_BMAP_EVENT(xfs_iext_remove); DEFINE_BMAP_EVENT(xfs_bmap_pre_update); DEFINE_BMAP_EVENT(xfs_bmap_post_update); DEFINE_BMAP_EVENT(xfs_extlist); -#define DEFINE_BUF_EVENT(tname) \ -TRACE_EVENT(tname, \ - TP_PROTO(struct xfs_buf *bp, unsigned long caller_ip), \ - TP_ARGS(bp, caller_ip), \ - TP_STRUCT__entry( \ - __field(dev_t, dev) \ - __field(xfs_daddr_t, bno) \ - __field(size_t, buffer_length) \ - __field(int, hold) \ - __field(int, pincount) \ - __field(unsigned, lockval) \ - __field(unsigned, flags) \ - __field(unsigned long, caller_ip) \ - ), \ - TP_fast_assign( \ - __entry->dev = bp->b_target->bt_dev; \ - __entry->bno = bp->b_bn; \ - __entry->buffer_length = bp->b_buffer_length; \ - __entry->hold = atomic_read(&bp->b_hold); \ - __entry->pincount = atomic_read(&bp->b_pin_count); \ - __entry->lockval = xfs_buf_lock_value(bp); \ - __entry->flags = bp->b_flags; \ - __entry->caller_ip = caller_ip; \ - ), \ - TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d " \ - "lock %d flags %s caller %pf", \ - MAJOR(__entry->dev), MINOR(__entry->dev), \ - (unsigned long long)__entry->bno, \ - __entry->buffer_length, \ - __entry->hold, \ - __entry->pincount, \ - __entry->lockval, \ - __print_flags(__entry->flags, "|", XFS_BUF_FLAGS), \ - (void *)__entry->caller_ip) \ +DECLARE_EVENT_CLASS(xfs_buf_class, + TP_PROTO(struct xfs_buf *bp, unsigned long caller_ip), + TP_ARGS(bp, caller_ip), + TP_STRUCT__entry( + __field(dev_t, dev) + __field(xfs_daddr_t, bno) + __field(size_t, buffer_length) + __field(int, hold) + __field(int, pincount) + __field(unsigned, lockval) + __field(unsigned, flags) + __field(unsigned long, caller_ip) + ), + TP_fast_assign( + __entry->dev = bp->b_target->bt_dev; + __entry->bno = bp->b_bn; + __entry->buffer_length = bp->b_buffer_length; + __entry->hold = atomic_read(&bp->b_hold); + __entry->pincount = atomic_read(&bp->b_pin_count); + __entry->lockval = xfs_buf_lock_value(bp); + __entry->flags = bp->b_flags; + __entry->caller_ip = caller_ip; + ), + TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d " + "lock %d flags %s caller %pf", + MAJOR(__entry->dev), MINOR(__entry->dev), + (unsigned long long)__entry->bno, + __entry->buffer_length, + __entry->hold, + __entry->pincount, + __entry->lockval, + __print_flags(__entry->flags, "|", XFS_BUF_FLAGS), + (void *)__entry->caller_ip) ) + +#define DEFINE_BUF_EVENT(name) \ +DEFINE_EVENT(xfs_buf_class, name, \ + TP_PROTO(struct xfs_buf *bp, unsigned long caller_ip), \ + TP_ARGS(bp, caller_ip)) DEFINE_BUF_EVENT(xfs_buf_init); DEFINE_BUF_EVENT(xfs_buf_free); DEFINE_BUF_EVENT(xfs_buf_hold); @@ -299,41 +311,45 @@ DEFINE_BUF_EVENT(xfs_reset_dqcounts); DEFINE_BUF_EVENT(xfs_inode_item_push); /* pass flags explicitly */ -#define DEFINE_BUF_FLAGS_EVENT(tname) \ -TRACE_EVENT(tname, \ - TP_PROTO(struct xfs_buf *bp, unsigned flags, unsigned long caller_ip), \ - TP_ARGS(bp, flags, caller_ip), \ - TP_STRUCT__entry( \ - __field(dev_t, dev) \ - __field(xfs_daddr_t, bno) \ - __field(size_t, buffer_length) \ - __field(int, hold) \ - __field(int, pincount) \ - __field(unsigned, lockval) \ - __field(unsigned, flags) \ - __field(unsigned long, caller_ip) \ - ), \ - TP_fast_assign( \ - __entry->dev = bp->b_target->bt_dev; \ - __entry->bno = bp->b_bn; \ - __entry->buffer_length = bp->b_buffer_length; \ - __entry->flags = flags; \ - __entry->hold = atomic_read(&bp->b_hold); \ - __entry->pincount = atomic_read(&bp->b_pin_count); \ - __entry->lockval = xfs_buf_lock_value(bp); \ - __entry->caller_ip = caller_ip; \ - ), \ - TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d " \ - "lock %d flags %s caller %pf", \ - MAJOR(__entry->dev), MINOR(__entry->dev), \ - (unsigned long long)__entry->bno, \ - __entry->buffer_length, \ - __entry->hold, \ - __entry->pincount, \ - __entry->lockval, \ - __print_flags(__entry->flags, "|", XFS_BUF_FLAGS), \ - (void *)__entry->caller_ip) \ +DECLARE_EVENT_CLASS(xfs_buf_flags_class, + TP_PROTO(struct xfs_buf *bp, unsigned flags, unsigned long caller_ip), + TP_ARGS(bp, flags, caller_ip), + TP_STRUCT__entry( + __field(dev_t, dev) + __field(xfs_daddr_t, bno) + __field(size_t, buffer_length) + __field(int, hold) + __field(int, pincount) + __field(unsigned, lockval) + __field(unsigned, flags) + __field(unsigned long, caller_ip) + ), + TP_fast_assign( + __entry->dev = bp->b_target->bt_dev; + __entry->bno = bp->b_bn; + __entry->buffer_length = bp->b_buffer_length; + __entry->flags = flags; + __entry->hold = atomic_read(&bp->b_hold); + __entry->pincount = atomic_read(&bp->b_pin_count); + __entry->lockval = xfs_buf_lock_value(bp); + __entry->caller_ip = caller_ip; + ), + TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d " + "lock %d flags %s caller %pf", + MAJOR(__entry->dev), MINOR(__entry->dev), + (unsigned long long)__entry->bno, + __entry->buffer_length, + __entry->hold, + __entry->pincount, + __entry->lockval, + __print_flags(__entry->flags, "|", XFS_BUF_FLAGS), + (void *)__entry->caller_ip) ) + +#define DEFINE_BUF_FLAGS_EVENT(name) \ +DEFINE_EVENT(xfs_buf_flags_class, name, \ + TP_PROTO(struct xfs_buf *bp, unsigned flags, unsigned long caller_ip), \ + TP_ARGS(bp, flags, caller_ip)) DEFINE_BUF_FLAGS_EVENT(xfs_buf_find); DEFINE_BUF_FLAGS_EVENT(xfs_buf_get); DEFINE_BUF_FLAGS_EVENT(xfs_buf_read); @@ -376,55 +392,58 @@ TRACE_EVENT(xfs_buf_ioerror, (void *)__entry->caller_ip) ); -#define DEFINE_BUF_ITEM_EVENT(tname) \ -TRACE_EVENT(tname, \ - TP_PROTO(struct xfs_buf_log_item *bip), \ - TP_ARGS(bip), \ - TP_STRUCT__entry( \ - __field(dev_t, dev) \ - __field(xfs_daddr_t, buf_bno) \ - __field(size_t, buf_len) \ - __field(int, buf_hold) \ - __field(int, buf_pincount) \ - __field(int, buf_lockval) \ - __field(unsigned, buf_flags) \ - __field(unsigned, bli_recur) \ - __field(int, bli_refcount) \ - __field(unsigned, bli_flags) \ - __field(void *, li_desc) \ - __field(unsigned, li_flags) \ - ), \ - TP_fast_assign( \ - __entry->dev = bip->bli_buf->b_target->bt_dev; \ - __entry->bli_flags = bip->bli_flags; \ - __entry->bli_recur = bip->bli_recur; \ - __entry->bli_refcount = atomic_read(&bip->bli_refcount); \ - __entry->buf_bno = bip->bli_buf->b_bn; \ - __entry->buf_len = bip->bli_buf->b_buffer_length; \ - __entry->buf_flags = bip->bli_buf->b_flags; \ - __entry->buf_hold = atomic_read(&bip->bli_buf->b_hold); \ - __entry->buf_pincount = \ - atomic_read(&bip->bli_buf->b_pin_count); \ - __entry->buf_lockval = xfs_buf_lock_value(bip->bli_buf); \ - __entry->li_desc = bip->bli_item.li_desc; \ - __entry->li_flags = bip->bli_item.li_flags; \ - ), \ - TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d " \ - "lock %d flags %s recur %d refcount %d bliflags %s " \ - "lidesc 0x%p liflags %s", \ - MAJOR(__entry->dev), MINOR(__entry->dev), \ - (unsigned long long)__entry->buf_bno, \ - __entry->buf_len, \ - __entry->buf_hold, \ - __entry->buf_pincount, \ - __entry->buf_lockval, \ - __print_flags(__entry->buf_flags, "|", XFS_BUF_FLAGS), \ - __entry->bli_recur, \ - __entry->bli_refcount, \ - __print_flags(__entry->bli_flags, "|", XFS_BLI_FLAGS), \ - __entry->li_desc, \ - __print_flags(__entry->li_flags, "|", XFS_LI_FLAGS)) \ +DECLARE_EVENT_CLASS(xfs_buf_item_class, + TP_PROTO(struct xfs_buf_log_item *bip), + TP_ARGS(bip), + TP_STRUCT__entry( + __field(dev_t, dev) + __field(xfs_daddr_t, buf_bno) + __field(size_t, buf_len) + __field(int, buf_hold) + __field(int, buf_pincount) + __field(int, buf_lockval) + __field(unsigned, buf_flags) + __field(unsigned, bli_recur) + __field(int, bli_refcount) + __field(unsigned, bli_flags) + __field(void *, li_desc) + __field(unsigned, li_flags) + ), + TP_fast_assign( + __entry->dev = bip->bli_buf->b_target->bt_dev; + __entry->bli_flags = bip->bli_flags; + __entry->bli_recur = bip->bli_recur; + __entry->bli_refcount = atomic_read(&bip->bli_refcount); + __entry->buf_bno = bip->bli_buf->b_bn; + __entry->buf_len = bip->bli_buf->b_buffer_length; + __entry->buf_flags = bip->bli_buf->b_flags; + __entry->buf_hold = atomic_read(&bip->bli_buf->b_hold); + __entry->buf_pincount = atomic_read(&bip->bli_buf->b_pin_count); + __entry->buf_lockval = xfs_buf_lock_value(bip->bli_buf); + __entry->li_desc = bip->bli_item.li_desc; + __entry->li_flags = bip->bli_item.li_flags; + ), + TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d " + "lock %d flags %s recur %d refcount %d bliflags %s " + "lidesc 0x%p liflags %s", + MAJOR(__entry->dev), MINOR(__entry->dev), + (unsigned long long)__entry->buf_bno, + __entry->buf_len, + __entry->buf_hold, + __entry->buf_pincount, + __entry->buf_lockval, + __print_flags(__entry->buf_flags, "|", XFS_BUF_FLAGS), + __entry->bli_recur, + __entry->bli_refcount, + __print_flags(__entry->bli_flags, "|", XFS_BLI_FLAGS), + __entry->li_desc, + __print_flags(__entry->li_flags, "|", XFS_LI_FLAGS)) ) + +#define DEFINE_BUF_ITEM_EVENT(name) \ +DEFINE_EVENT(xfs_buf_item_class, name, \ + TP_PROTO(struct xfs_buf_log_item *bip), \ + TP_ARGS(bip)) DEFINE_BUF_ITEM_EVENT(xfs_buf_item_size); DEFINE_BUF_ITEM_EVENT(xfs_buf_item_size_stale); DEFINE_BUF_ITEM_EVENT(xfs_buf_item_format); @@ -450,78 +469,90 @@ DEFINE_BUF_ITEM_EVENT(xfs_trans_bhold); DEFINE_BUF_ITEM_EVENT(xfs_trans_bhold_release); DEFINE_BUF_ITEM_EVENT(xfs_trans_binval); -#define DEFINE_LOCK_EVENT(name) \ -TRACE_EVENT(name, \ - TP_PROTO(struct xfs_inode *ip, unsigned lock_flags, \ - unsigned long caller_ip), \ - TP_ARGS(ip, lock_flags, caller_ip), \ - TP_STRUCT__entry( \ - __field(dev_t, dev) \ - __field(xfs_ino_t, ino) \ - __field(int, lock_flags) \ - __field(unsigned long, caller_ip) \ - ), \ - TP_fast_assign( \ - __entry->dev = VFS_I(ip)->i_sb->s_dev; \ - __entry->ino = ip->i_ino; \ - __entry->lock_flags = lock_flags; \ - __entry->caller_ip = caller_ip; \ - ), \ - TP_printk("dev %d:%d ino 0x%llx flags %s caller %pf", \ - MAJOR(__entry->dev), MINOR(__entry->dev), \ - __entry->ino, \ - __print_flags(__entry->lock_flags, "|", XFS_LOCK_FLAGS), \ - (void *)__entry->caller_ip) \ +DECLARE_EVENT_CLASS(xfs_lock_class, + TP_PROTO(struct xfs_inode *ip, unsigned lock_flags, + unsigned long caller_ip), + TP_ARGS(ip, lock_flags, caller_ip), + TP_STRUCT__entry( + __field(dev_t, dev) + __field(xfs_ino_t, ino) + __field(int, lock_flags) + __field(unsigned long, caller_ip) + ), + TP_fast_assign( + __entry->dev = VFS_I(ip)->i_sb->s_dev; + __entry->ino = ip->i_ino; + __entry->lock_flags = lock_flags; + __entry->caller_ip = caller_ip; + ), + TP_printk("dev %d:%d ino 0x%llx flags %s caller %pf", + MAJOR(__entry->dev), MINOR(__entry->dev), + __entry->ino, + __print_flags(__entry->lock_flags, "|", XFS_LOCK_FLAGS), + (void *)__entry->caller_ip) ) +#define DEFINE_LOCK_EVENT(name) \ +DEFINE_EVENT(xfs_lock_class, name, \ + TP_PROTO(struct xfs_inode *ip, unsigned lock_flags, \ + unsigned long caller_ip), \ + TP_ARGS(ip, lock_flags, caller_ip)) DEFINE_LOCK_EVENT(xfs_ilock); DEFINE_LOCK_EVENT(xfs_ilock_nowait); DEFINE_LOCK_EVENT(xfs_ilock_demote); DEFINE_LOCK_EVENT(xfs_iunlock); -#define DEFINE_IGET_EVENT(name) \ -TRACE_EVENT(name, \ - TP_PROTO(struct xfs_inode *ip), \ - TP_ARGS(ip), \ - TP_STRUCT__entry( \ - __field(dev_t, dev) \ - __field(xfs_ino_t, ino) \ - ), \ - TP_fast_assign( \ - __entry->dev = VFS_I(ip)->i_sb->s_dev; \ - __entry->ino = ip->i_ino; \ - ), \ - TP_printk("dev %d:%d ino 0x%llx", \ - MAJOR(__entry->dev), MINOR(__entry->dev), \ - __entry->ino) \ +DECLARE_EVENT_CLASS(xfs_iget_class, + TP_PROTO(struct xfs_inode *ip), + TP_ARGS(ip), + TP_STRUCT__entry( + __field(dev_t, dev) + __field(xfs_ino_t, ino) + ), + TP_fast_assign( + __entry->dev = VFS_I(ip)->i_sb->s_dev; + __entry->ino = ip->i_ino; + ), + TP_printk("dev %d:%d ino 0x%llx", + MAJOR(__entry->dev), MINOR(__entry->dev), + __entry->ino) ) + +#define DEFINE_IGET_EVENT(name) \ +DEFINE_EVENT(xfs_iget_class, name, \ + TP_PROTO(struct xfs_inode *ip), \ + TP_ARGS(ip)) DEFINE_IGET_EVENT(xfs_iget_skip); DEFINE_IGET_EVENT(xfs_iget_reclaim); DEFINE_IGET_EVENT(xfs_iget_found); DEFINE_IGET_EVENT(xfs_iget_alloc); -#define DEFINE_INODE_EVENT(name) \ -TRACE_EVENT(name, \ - TP_PROTO(struct xfs_inode *ip, unsigned long caller_ip), \ - TP_ARGS(ip, caller_ip), \ - TP_STRUCT__entry( \ - __field(dev_t, dev) \ - __field(xfs_ino_t, ino) \ - __field(int, count) \ - __field(unsigned long, caller_ip) \ - ), \ - TP_fast_assign( \ - __entry->dev = VFS_I(ip)->i_sb->s_dev; \ - __entry->ino = ip->i_ino; \ - __entry->count = atomic_read(&VFS_I(ip)->i_count); \ - __entry->caller_ip = caller_ip; \ - ), \ - TP_printk("dev %d:%d ino 0x%llx count %d caller %pf", \ - MAJOR(__entry->dev), MINOR(__entry->dev), \ - __entry->ino, \ - __entry->count, \ - (char *)__entry->caller_ip) \ +DECLARE_EVENT_CLASS(xfs_inode_class, + TP_PROTO(struct xfs_inode *ip, unsigned long caller_ip), + TP_ARGS(ip, caller_ip), + TP_STRUCT__entry( + __field(dev_t, dev) + __field(xfs_ino_t, ino) + __field(int, count) + __field(unsigned long, caller_ip) + ), + TP_fast_assign( + __entry->dev = VFS_I(ip)->i_sb->s_dev; + __entry->ino = ip->i_ino; + __entry->count = atomic_read(&VFS_I(ip)->i_count); + __entry->caller_ip = caller_ip; + ), + TP_printk("dev %d:%d ino 0x%llx count %d caller %pf", + MAJOR(__entry->dev), MINOR(__entry->dev), + __entry->ino, + __entry->count, + (char *)__entry->caller_ip) ) + +#define DEFINE_INODE_EVENT(name) \ +DEFINE_EVENT(xfs_inode_class, name, \ + TP_PROTO(struct xfs_inode *ip, unsigned long caller_ip), \ + TP_ARGS(ip, caller_ip)) DEFINE_INODE_EVENT(xfs_ihold); DEFINE_INODE_EVENT(xfs_irele); /* the old xfs_itrace_entry tracer - to be replaced by s.th. in the VFS */ @@ -529,55 +560,59 @@ DEFINE_INODE_EVENT(xfs_inode); #define xfs_itrace_entry(ip) \ trace_xfs_inode(ip, _THIS_IP_) -#define DEFINE_DQUOT_EVENT(tname) \ -TRACE_EVENT(tname, \ - TP_PROTO(struct xfs_dquot *dqp), \ - TP_ARGS(dqp), \ - TP_STRUCT__entry( \ - __field(dev_t, dev) \ - __field(__be32, id) \ - __field(unsigned, flags) \ - __field(unsigned, nrefs) \ - __field(unsigned long long, res_bcount) \ - __field(unsigned long long, bcount) \ - __field(unsigned long long, icount) \ - __field(unsigned long long, blk_hardlimit) \ - __field(unsigned long long, blk_softlimit) \ - __field(unsigned long long, ino_hardlimit) \ - __field(unsigned long long, ino_softlimit) \ +DECLARE_EVENT_CLASS(xfs_dquot_class, + TP_PROTO(struct xfs_dquot *dqp), + TP_ARGS(dqp), + TP_STRUCT__entry( + __field(dev_t, dev) + __field(__be32, id) + __field(unsigned, flags) + __field(unsigned, nrefs) + __field(unsigned long long, res_bcount) + __field(unsigned long long, bcount) + __field(unsigned long long, icount) + __field(unsigned long long, blk_hardlimit) + __field(unsigned long long, blk_softlimit) + __field(unsigned long long, ino_hardlimit) + __field(unsigned long long, ino_softlimit) ), \ - TP_fast_assign( \ - __entry->dev = dqp->q_mount->m_super->s_dev; \ - __entry->id = dqp->q_core.d_id; \ - __entry->flags = dqp->dq_flags; \ - __entry->nrefs = dqp->q_nrefs; \ - __entry->res_bcount = dqp->q_res_bcount; \ - __entry->bcount = be64_to_cpu(dqp->q_core.d_bcount); \ - __entry->icount = be64_to_cpu(dqp->q_core.d_icount); \ - __entry->blk_hardlimit = \ - be64_to_cpu(dqp->q_core.d_blk_hardlimit); \ - __entry->blk_softlimit = \ - be64_to_cpu(dqp->q_core.d_blk_softlimit); \ - __entry->ino_hardlimit = \ - be64_to_cpu(dqp->q_core.d_ino_hardlimit); \ - __entry->ino_softlimit = \ - be64_to_cpu(dqp->q_core.d_ino_softlimit); \ - ), \ - TP_printk("dev %d:%d id 0x%x flags %s nrefs %u res_bc 0x%llx " \ - "bcnt 0x%llx [hard 0x%llx | soft 0x%llx] " \ - "icnt 0x%llx [hard 0x%llx | soft 0x%llx]", \ - MAJOR(__entry->dev), MINOR(__entry->dev), \ - be32_to_cpu(__entry->id), \ - __print_flags(__entry->flags, "|", XFS_DQ_FLAGS), \ - __entry->nrefs, \ - __entry->res_bcount, \ - __entry->bcount, \ - __entry->blk_hardlimit, \ - __entry->blk_softlimit, \ - __entry->icount, \ - __entry->ino_hardlimit, \ - __entry->ino_softlimit) \ + TP_fast_assign( + __entry->dev = dqp->q_mount->m_super->s_dev; + __entry->id = dqp->q_core.d_id; + __entry->flags = dqp->dq_flags; + __entry->nrefs = dqp->q_nrefs; + __entry->res_bcount = dqp->q_res_bcount; + __entry->bcount = be64_to_cpu(dqp->q_core.d_bcount); + __entry->icount = be64_to_cpu(dqp->q_core.d_icount); + __entry->blk_hardlimit = + be64_to_cpu(dqp->q_core.d_blk_hardlimit); + __entry->blk_softlimit = + be64_to_cpu(dqp->q_core.d_blk_softlimit); + __entry->ino_hardlimit = + be64_to_cpu(dqp->q_core.d_ino_hardlimit); + __entry->ino_softlimit = + be64_to_cpu(dqp->q_core.d_ino_softlimit); + ), + TP_printk("dev %d:%d id 0x%x flags %s nrefs %u res_bc 0x%llx " + "bcnt 0x%llx [hard 0x%llx | soft 0x%llx] " + "icnt 0x%llx [hard 0x%llx | soft 0x%llx]", + MAJOR(__entry->dev), MINOR(__entry->dev), + be32_to_cpu(__entry->id), + __print_flags(__entry->flags, "|", XFS_DQ_FLAGS), + __entry->nrefs, + __entry->res_bcount, + __entry->bcount, + __entry->blk_hardlimit, + __entry->blk_softlimit, + __entry->icount, + __entry->ino_hardlimit, + __entry->ino_softlimit) ) + +#define DEFINE_DQUOT_EVENT(name) \ +DEFINE_EVENT(xfs_dquot_class, name, \ + TP_PROTO(struct xfs_dquot *dqp), \ + TP_ARGS(dqp)) DEFINE_DQUOT_EVENT(xfs_dqadjust); DEFINE_DQUOT_EVENT(xfs_dqshake_dirty); DEFINE_DQUOT_EVENT(xfs_dqshake_unlink); @@ -610,72 +645,75 @@ DEFINE_DQUOT_EVENT(xfs_dqflush_done); DEFINE_IGET_EVENT(xfs_dquot_dqalloc); DEFINE_IGET_EVENT(xfs_dquot_dqdetach); - -#define DEFINE_LOGGRANT_EVENT(tname) \ -TRACE_EVENT(tname, \ - TP_PROTO(struct log *log, struct xlog_ticket *tic), \ - TP_ARGS(log, tic), \ - TP_STRUCT__entry( \ - __field(dev_t, dev) \ - __field(unsigned, trans_type) \ - __field(char, ocnt) \ - __field(char, cnt) \ - __field(int, curr_res) \ - __field(int, unit_res) \ - __field(unsigned int, flags) \ - __field(void *, reserve_headq) \ - __field(void *, write_headq) \ - __field(int, grant_reserve_cycle) \ - __field(int, grant_reserve_bytes) \ - __field(int, grant_write_cycle) \ - __field(int, grant_write_bytes) \ - __field(int, curr_cycle) \ - __field(int, curr_block) \ - __field(xfs_lsn_t, tail_lsn) \ - ), \ - TP_fast_assign( \ - __entry->dev = log->l_mp->m_super->s_dev; \ - __entry->trans_type = tic->t_trans_type; \ - __entry->ocnt = tic->t_ocnt; \ - __entry->cnt = tic->t_cnt; \ - __entry->curr_res = tic->t_curr_res; \ - __entry->unit_res = tic->t_unit_res; \ - __entry->flags = tic->t_flags; \ - __entry->reserve_headq = log->l_reserve_headq; \ - __entry->write_headq = log->l_write_headq; \ - __entry->grant_reserve_cycle = log->l_grant_reserve_cycle; \ - __entry->grant_reserve_bytes = log->l_grant_reserve_bytes; \ - __entry->grant_write_cycle = log->l_grant_write_cycle; \ - __entry->grant_write_bytes = log->l_grant_write_bytes; \ - __entry->curr_cycle = log->l_curr_cycle; \ - __entry->curr_block = log->l_curr_block; \ - __entry->tail_lsn = log->l_tail_lsn; \ - ), \ - TP_printk("dev %d:%d type %s t_ocnt %u t_cnt %u t_curr_res %u " \ - "t_unit_res %u t_flags %s reserve_headq 0x%p " \ - "write_headq 0x%p grant_reserve_cycle %d " \ - "grant_reserve_bytes %d grant_write_cycle %d " \ - "grant_write_bytes %d curr_cycle %d curr_block %d " \ - "tail_cycle %d tail_block %d", \ - MAJOR(__entry->dev), MINOR(__entry->dev), \ - __print_symbolic(__entry->trans_type, XFS_TRANS_TYPES), \ - __entry->ocnt, \ - __entry->cnt, \ - __entry->curr_res, \ - __entry->unit_res, \ - __print_flags(__entry->flags, "|", XLOG_TIC_FLAGS), \ - __entry->reserve_headq, \ - __entry->write_headq, \ - __entry->grant_reserve_cycle, \ - __entry->grant_reserve_bytes, \ - __entry->grant_write_cycle, \ - __entry->grant_write_bytes, \ - __entry->curr_cycle, \ - __entry->curr_block, \ - CYCLE_LSN(__entry->tail_lsn), \ - BLOCK_LSN(__entry->tail_lsn) \ - ) \ +DECLARE_EVENT_CLASS(xfs_loggrant_class, + TP_PROTO(struct log *log, struct xlog_ticket *tic), + TP_ARGS(log, tic), + TP_STRUCT__entry( + __field(dev_t, dev) + __field(unsigned, trans_type) + __field(char, ocnt) + __field(char, cnt) + __field(int, curr_res) + __field(int, unit_res) + __field(unsigned int, flags) + __field(void *, reserve_headq) + __field(void *, write_headq) + __field(int, grant_reserve_cycle) + __field(int, grant_reserve_bytes) + __field(int, grant_write_cycle) + __field(int, grant_write_bytes) + __field(int, curr_cycle) + __field(int, curr_block) + __field(xfs_lsn_t, tail_lsn) + ), + TP_fast_assign( + __entry->dev = log->l_mp->m_super->s_dev; + __entry->trans_type = tic->t_trans_type; + __entry->ocnt = tic->t_ocnt; + __entry->cnt = tic->t_cnt; + __entry->curr_res = tic->t_curr_res; + __entry->unit_res = tic->t_unit_res; + __entry->flags = tic->t_flags; + __entry->reserve_headq = log->l_reserve_headq; + __entry->write_headq = log->l_write_headq; + __entry->grant_reserve_cycle = log->l_grant_reserve_cycle; + __entry->grant_reserve_bytes = log->l_grant_reserve_bytes; + __entry->grant_write_cycle = log->l_grant_write_cycle; + __entry->grant_write_bytes = log->l_grant_write_bytes; + __entry->curr_cycle = log->l_curr_cycle; + __entry->curr_block = log->l_curr_block; + __entry->tail_lsn = log->l_tail_lsn; + ), + TP_printk("dev %d:%d type %s t_ocnt %u t_cnt %u t_curr_res %u " + "t_unit_res %u t_flags %s reserve_headq 0x%p " + "write_headq 0x%p grant_reserve_cycle %d " + "grant_reserve_bytes %d grant_write_cycle %d " + "grant_write_bytes %d curr_cycle %d curr_block %d " + "tail_cycle %d tail_block %d", + MAJOR(__entry->dev), MINOR(__entry->dev), + __print_symbolic(__entry->trans_type, XFS_TRANS_TYPES), + __entry->ocnt, + __entry->cnt, + __entry->curr_res, + __entry->unit_res, + __print_flags(__entry->flags, "|", XLOG_TIC_FLAGS), + __entry->reserve_headq, + __entry->write_headq, + __entry->grant_reserve_cycle, + __entry->grant_reserve_bytes, + __entry->grant_write_cycle, + __entry->grant_write_bytes, + __entry->curr_cycle, + __entry->curr_block, + CYCLE_LSN(__entry->tail_lsn), + BLOCK_LSN(__entry->tail_lsn) + ) ) + +#define DEFINE_LOGGRANT_EVENT(name) \ +DEFINE_EVENT(xfs_loggrant_class, name, \ + TP_PROTO(struct log *log, struct xlog_ticket *tic), \ + TP_ARGS(log, tic)) DEFINE_LOGGRANT_EVENT(xfs_log_done_nonperm); DEFINE_LOGGRANT_EVENT(xfs_log_done_perm); DEFINE_LOGGRANT_EVENT(xfs_log_reserve); @@ -897,28 +935,32 @@ TRACE_EVENT(xfs_itruncate_start, __entry->toss_finish) ); -#define DEFINE_ITRUNC_EVENT(name) \ -TRACE_EVENT(name, \ - TP_PROTO(struct xfs_inode *ip, xfs_fsize_t new_size), \ - TP_ARGS(ip, new_size), \ - TP_STRUCT__entry( \ - __field(dev_t, dev) \ - __field(xfs_ino_t, ino) \ - __field(xfs_fsize_t, size) \ - __field(xfs_fsize_t, new_size) \ - ), \ - TP_fast_assign( \ - __entry->dev = VFS_I(ip)->i_sb->s_dev; \ - __entry->ino = ip->i_ino; \ - __entry->size = ip->i_d.di_size; \ - __entry->new_size = new_size; \ - ), \ - TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx", \ - MAJOR(__entry->dev), MINOR(__entry->dev), \ - __entry->ino, \ - __entry->size, \ - __entry->new_size) \ +DECLARE_EVENT_CLASS(xfs_itrunc_class, + TP_PROTO(struct xfs_inode *ip, xfs_fsize_t new_size), + TP_ARGS(ip, new_size), + TP_STRUCT__entry( + __field(dev_t, dev) + __field(xfs_ino_t, ino) + __field(xfs_fsize_t, size) + __field(xfs_fsize_t, new_size) + ), + TP_fast_assign( + __entry->dev = VFS_I(ip)->i_sb->s_dev; + __entry->ino = ip->i_ino; + __entry->size = ip->i_d.di_size; + __entry->new_size = new_size; + ), + TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx", + MAJOR(__entry->dev), MINOR(__entry->dev), + __entry->ino, + __entry->size, + __entry->new_size) ) + +#define DEFINE_ITRUNC_EVENT(name) \ +DEFINE_EVENT(xfs_itrunc_class, name, \ + TP_PROTO(struct xfs_inode *ip, xfs_fsize_t new_size), \ + TP_ARGS(ip, new_size)) DEFINE_ITRUNC_EVENT(xfs_itruncate_finish_start); DEFINE_ITRUNC_EVENT(xfs_itruncate_finish_end); @@ -1152,77 +1194,80 @@ TRACE_EVENT(xfs_free_extent, ); -#define DEFINE_ALLOC_EVENT(name) \ -TRACE_EVENT(name, \ - TP_PROTO(struct xfs_alloc_arg *args), \ - TP_ARGS(args), \ - TP_STRUCT__entry( \ - __field(dev_t, dev) \ - __field(xfs_agnumber_t, agno) \ - __field(xfs_agblock_t, agbno) \ - __field(xfs_extlen_t, minlen) \ - __field(xfs_extlen_t, maxlen) \ - __field(xfs_extlen_t, mod) \ - __field(xfs_extlen_t, prod) \ - __field(xfs_extlen_t, minleft) \ - __field(xfs_extlen_t, total) \ - __field(xfs_extlen_t, alignment) \ - __field(xfs_extlen_t, minalignslop) \ - __field(xfs_extlen_t, len) \ - __field(short, type) \ - __field(short, otype) \ - __field(char, wasdel) \ - __field(char, wasfromfl) \ - __field(char, isfl) \ - __field(char, userdata) \ - __field(xfs_fsblock_t, firstblock) \ - ), \ - TP_fast_assign( \ - __entry->dev = args->mp->m_super->s_dev; \ - __entry->agno = args->agno; \ - __entry->agbno = args->agbno; \ - __entry->minlen = args->minlen; \ - __entry->maxlen = args->maxlen; \ - __entry->mod = args->mod; \ - __entry->prod = args->prod; \ - __entry->minleft = args->minleft; \ - __entry->total = args->total; \ - __entry->alignment = args->alignment; \ - __entry->minalignslop = args->minalignslop; \ - __entry->len = args->len; \ - __entry->type = args->type; \ - __entry->otype = args->otype; \ - __entry->wasdel = args->wasdel; \ - __entry->wasfromfl = args->wasfromfl; \ - __entry->isfl = args->isfl; \ - __entry->userdata = args->userdata; \ - __entry->firstblock = args->firstblock; \ - ), \ - TP_printk("dev %d:%d agno %u agbno %u minlen %u maxlen %u mod %u " \ - "prod %u minleft %u total %u alignment %u minalignslop %u " \ - "len %u type %s otype %s wasdel %d wasfromfl %d isfl %d " \ - "userdata %d firstblock %s", \ - MAJOR(__entry->dev), MINOR(__entry->dev), \ - __entry->agno, \ - __entry->agbno, \ - __entry->minlen, \ - __entry->maxlen, \ - __entry->mod, \ - __entry->prod, \ - __entry->minleft, \ - __entry->total, \ - __entry->alignment, \ - __entry->minalignslop, \ - __entry->len, \ - __print_symbolic(__entry->type, XFS_ALLOC_TYPES), \ - __print_symbolic(__entry->otype, XFS_ALLOC_TYPES), \ - __entry->wasdel, \ - __entry->wasfromfl, \ - __entry->isfl, \ - __entry->userdata, \ - xfs_fmtfsblock(__entry->firstblock)) \ +DECLARE_EVENT_CLASS(xfs_alloc_class, + TP_PROTO(struct xfs_alloc_arg *args), + TP_ARGS(args), + TP_STRUCT__entry( + __field(dev_t, dev) + __field(xfs_agnumber_t, agno) + __field(xfs_agblock_t, agbno) + __field(xfs_extlen_t, minlen) + __field(xfs_extlen_t, maxlen) + __field(xfs_extlen_t, mod) + __field(xfs_extlen_t, prod) + __field(xfs_extlen_t, minleft) + __field(xfs_extlen_t, total) + __field(xfs_extlen_t, alignment) + __field(xfs_extlen_t, minalignslop) + __field(xfs_extlen_t, len) + __field(short, type) + __field(short, otype) + __field(char, wasdel) + __field(char, wasfromfl) + __field(char, isfl) + __field(char, userdata) + __field(xfs_fsblock_t, firstblock) + ), + TP_fast_assign( + __entry->dev = args->mp->m_super->s_dev; + __entry->agno = args->agno; + __entry->agbno = args->agbno; + __entry->minlen = args->minlen; + __entry->maxlen = args->maxlen; + __entry->mod = args->mod; + __entry->prod = args->prod; + __entry->minleft = args->minleft; + __entry->total = args->total; + __entry->alignment = args->alignment; + __entry->minalignslop = args->minalignslop; + __entry->len = args->len; + __entry->type = args->type; + __entry->otype = args->otype; + __entry->wasdel = args->wasdel; + __entry->wasfromfl = args->wasfromfl; + __entry->isfl = args->isfl; + __entry->userdata = args->userdata; + __entry->firstblock = args->firstblock; + ), + TP_printk("dev %d:%d agno %u agbno %u minlen %u maxlen %u mod %u " + "prod %u minleft %u total %u alignment %u minalignslop %u " + "len %u type %s otype %s wasdel %d wasfromfl %d isfl %d " + "userdata %d firstblock 0x%llx", + MAJOR(__entry->dev), MINOR(__entry->dev), + __entry->agno, + __entry->agbno, + __entry->minlen, + __entry->maxlen, + __entry->mod, + __entry->prod, + __entry->minleft, + __entry->total, + __entry->alignment, + __entry->minalignslop, + __entry->len, + __print_symbolic(__entry->type, XFS_ALLOC_TYPES), + __print_symbolic(__entry->otype, XFS_ALLOC_TYPES), + __entry->wasdel, + __entry->wasfromfl, + __entry->isfl, + __entry->userdata, + __entry->firstblock) ) +#define DEFINE_ALLOC_EVENT(name) \ +DEFINE_EVENT(xfs_alloc_class, name, \ + TP_PROTO(struct xfs_alloc_arg *args), \ + TP_ARGS(args)) DEFINE_ALLOC_EVENT(xfs_alloc_exact_done); DEFINE_ALLOC_EVENT(xfs_alloc_exact_error); DEFINE_ALLOC_EVENT(xfs_alloc_near_nominleft); @@ -1245,92 +1290,100 @@ DEFINE_ALLOC_EVENT(xfs_alloc_vextent_noagbp); DEFINE_ALLOC_EVENT(xfs_alloc_vextent_loopfailed); DEFINE_ALLOC_EVENT(xfs_alloc_vextent_allfailed); -#define DEFINE_DIR2_TRACE(tname) \ -TRACE_EVENT(tname, \ - TP_PROTO(struct xfs_da_args *args), \ - TP_ARGS(args), \ - TP_STRUCT__entry( \ - __field(dev_t, dev) \ - __field(xfs_ino_t, ino) \ - __dynamic_array(char, name, args->namelen) \ - __field(int, namelen) \ - __field(xfs_dahash_t, hashval) \ - __field(xfs_ino_t, inumber) \ - __field(int, op_flags) \ - ), \ - TP_fast_assign( \ - __entry->dev = VFS_I(args->dp)->i_sb->s_dev; \ - __entry->ino = args->dp->i_ino; \ - if (args->namelen) \ - memcpy(__get_str(name), args->name, args->namelen); \ - __entry->namelen = args->namelen; \ - __entry->hashval = args->hashval; \ - __entry->inumber = args->inumber; \ - __entry->op_flags = args->op_flags; \ - ), \ - TP_printk("dev %d:%d ino 0x%llx name %.*s namelen %d hashval 0x%x " \ - "inumber 0x%llx op_flags %s", \ - MAJOR(__entry->dev), MINOR(__entry->dev), \ - __entry->ino, \ - __entry->namelen, \ - __entry->namelen ? __get_str(name) : NULL, \ - __entry->namelen, \ - __entry->hashval, \ - __entry->inumber, \ - __print_flags(__entry->op_flags, "|", XFS_DA_OP_FLAGS)) \ +DECLARE_EVENT_CLASS(xfs_dir2_class, + TP_PROTO(struct xfs_da_args *args), + TP_ARGS(args), + TP_STRUCT__entry( + __field(dev_t, dev) + __field(xfs_ino_t, ino) + __dynamic_array(char, name, args->namelen) + __field(int, namelen) + __field(xfs_dahash_t, hashval) + __field(xfs_ino_t, inumber) + __field(int, op_flags) + ), + TP_fast_assign( + __entry->dev = VFS_I(args->dp)->i_sb->s_dev; + __entry->ino = args->dp->i_ino; + if (args->namelen) + memcpy(__get_str(name), args->name, args->namelen); + __entry->namelen = args->namelen; + __entry->hashval = args->hashval; + __entry->inumber = args->inumber; + __entry->op_flags = args->op_flags; + ), + TP_printk("dev %d:%d ino 0x%llx name %.*s namelen %d hashval 0x%x " + "inumber 0x%llx op_flags %s", + MAJOR(__entry->dev), MINOR(__entry->dev), + __entry->ino, + __entry->namelen, + __entry->namelen ? __get_str(name) : NULL, + __entry->namelen, + __entry->hashval, + __entry->inumber, + __print_flags(__entry->op_flags, "|", XFS_DA_OP_FLAGS)) ) -DEFINE_DIR2_TRACE(xfs_dir2_sf_addname); -DEFINE_DIR2_TRACE(xfs_dir2_sf_create); -DEFINE_DIR2_TRACE(xfs_dir2_sf_lookup); -DEFINE_DIR2_TRACE(xfs_dir2_sf_replace); -DEFINE_DIR2_TRACE(xfs_dir2_sf_removename); -DEFINE_DIR2_TRACE(xfs_dir2_sf_toino4); -DEFINE_DIR2_TRACE(xfs_dir2_sf_toino8); -DEFINE_DIR2_TRACE(xfs_dir2_sf_to_block); -DEFINE_DIR2_TRACE(xfs_dir2_block_addname); -DEFINE_DIR2_TRACE(xfs_dir2_block_lookup); -DEFINE_DIR2_TRACE(xfs_dir2_block_replace); -DEFINE_DIR2_TRACE(xfs_dir2_block_removename); -DEFINE_DIR2_TRACE(xfs_dir2_block_to_sf); -DEFINE_DIR2_TRACE(xfs_dir2_block_to_leaf); -DEFINE_DIR2_TRACE(xfs_dir2_leaf_addname); -DEFINE_DIR2_TRACE(xfs_dir2_leaf_lookup); -DEFINE_DIR2_TRACE(xfs_dir2_leaf_replace); -DEFINE_DIR2_TRACE(xfs_dir2_leaf_removename); -DEFINE_DIR2_TRACE(xfs_dir2_leaf_to_block); -DEFINE_DIR2_TRACE(xfs_dir2_leaf_to_node); -DEFINE_DIR2_TRACE(xfs_dir2_node_addname); -DEFINE_DIR2_TRACE(xfs_dir2_node_lookup); -DEFINE_DIR2_TRACE(xfs_dir2_node_replace); -DEFINE_DIR2_TRACE(xfs_dir2_node_removename); -DEFINE_DIR2_TRACE(xfs_dir2_node_to_leaf); -#define DEFINE_DIR2_SPACE_TRACE(tname) \ -TRACE_EVENT(tname, \ - TP_PROTO(struct xfs_da_args *args, int idx), \ - TP_ARGS(args, idx), \ - TP_STRUCT__entry( \ - __field(dev_t, dev) \ - __field(xfs_ino_t, ino) \ - __field(int, op_flags) \ - __field(int, idx) \ - ), \ - TP_fast_assign( \ - __entry->dev = VFS_I(args->dp)->i_sb->s_dev; \ - __entry->ino = args->dp->i_ino; \ - __entry->op_flags = args->op_flags; \ - __entry->idx = idx; \ - ), \ - TP_printk("dev %d:%d ino 0x%llx op_flags %s index %d", \ - MAJOR(__entry->dev), MINOR(__entry->dev), \ - __entry->ino, \ - __print_flags(__entry->op_flags, "|", XFS_DA_OP_FLAGS), \ - __entry->idx) \ +#define DEFINE_DIR2_EVENT(name) \ +DEFINE_EVENT(xfs_dir2_class, name, \ + TP_PROTO(struct xfs_da_args *args), \ + TP_ARGS(args)) +DEFINE_DIR2_EVENT(xfs_dir2_sf_addname); +DEFINE_DIR2_EVENT(xfs_dir2_sf_create); +DEFINE_DIR2_EVENT(xfs_dir2_sf_lookup); +DEFINE_DIR2_EVENT(xfs_dir2_sf_replace); +DEFINE_DIR2_EVENT(xfs_dir2_sf_removename); +DEFINE_DIR2_EVENT(xfs_dir2_sf_toino4); +DEFINE_DIR2_EVENT(xfs_dir2_sf_toino8); +DEFINE_DIR2_EVENT(xfs_dir2_sf_to_block); +DEFINE_DIR2_EVENT(xfs_dir2_block_addname); +DEFINE_DIR2_EVENT(xfs_dir2_block_lookup); +DEFINE_DIR2_EVENT(xfs_dir2_block_replace); +DEFINE_DIR2_EVENT(xfs_dir2_block_removename); +DEFINE_DIR2_EVENT(xfs_dir2_block_to_sf); +DEFINE_DIR2_EVENT(xfs_dir2_block_to_leaf); +DEFINE_DIR2_EVENT(xfs_dir2_leaf_addname); +DEFINE_DIR2_EVENT(xfs_dir2_leaf_lookup); +DEFINE_DIR2_EVENT(xfs_dir2_leaf_replace); +DEFINE_DIR2_EVENT(xfs_dir2_leaf_removename); +DEFINE_DIR2_EVENT(xfs_dir2_leaf_to_block); +DEFINE_DIR2_EVENT(xfs_dir2_leaf_to_node); +DEFINE_DIR2_EVENT(xfs_dir2_node_addname); +DEFINE_DIR2_EVENT(xfs_dir2_node_lookup); +DEFINE_DIR2_EVENT(xfs_dir2_node_replace); +DEFINE_DIR2_EVENT(xfs_dir2_node_removename); +DEFINE_DIR2_EVENT(xfs_dir2_node_to_leaf); + +DECLARE_EVENT_CLASS(xfs_dir2_space_class, + TP_PROTO(struct xfs_da_args *args, int idx), + TP_ARGS(args, idx), + TP_STRUCT__entry( + __field(dev_t, dev) + __field(xfs_ino_t, ino) + __field(int, op_flags) + __field(int, idx) + ), + TP_fast_assign( + __entry->dev = VFS_I(args->dp)->i_sb->s_dev; + __entry->ino = args->dp->i_ino; + __entry->op_flags = args->op_flags; + __entry->idx = idx; + ), + TP_printk("dev %d:%d ino 0x%llx op_flags %s index %d", + MAJOR(__entry->dev), MINOR(__entry->dev), + __entry->ino, + __print_flags(__entry->op_flags, "|", XFS_DA_OP_FLAGS), + __entry->idx) ) -DEFINE_DIR2_SPACE_TRACE(xfs_dir2_leafn_add); -DEFINE_DIR2_SPACE_TRACE(xfs_dir2_leafn_remove); -DEFINE_DIR2_SPACE_TRACE(xfs_dir2_grow_inode); -DEFINE_DIR2_SPACE_TRACE(xfs_dir2_shrink_inode); + +#define DEFINE_DIR2_SPACE_EVENT(name) \ +DEFINE_EVENT(xfs_dir2_space_class, name, \ + TP_PROTO(struct xfs_da_args *args, int idx), \ + TP_ARGS(args, idx)) +DEFINE_DIR2_SPACE_EVENT(xfs_dir2_leafn_add); +DEFINE_DIR2_SPACE_EVENT(xfs_dir2_leafn_remove); +DEFINE_DIR2_SPACE_EVENT(xfs_dir2_grow_inode); +DEFINE_DIR2_SPACE_EVENT(xfs_dir2_shrink_inode); TRACE_EVENT(xfs_dir2_leafn_moveents, TP_PROTO(struct xfs_da_args *args, int src_idx, int dst_idx, int count), From d6d59bada372bcf8bd36c3bbc71c485c29dd2a4b Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 23 Dec 2009 16:09:13 +0000 Subject: [PATCH 0575/1626] xfs: fix timestamp handling in xfs_setattr We currently have some rather odd code in xfs_setattr for updating the a/c/mtime timestamps: - first we do a non-transaction update if all three are updated together - second we implicitly update the ctime for various changes instead of relying on the ATTR_CTIME flag - third we set the timestamps to the current time instead of the arguments in the iattr structure in many cases. This patch makes sure we update it in a consistent way: - always transactional - ctime is only updated if ATTR_CTIME is set or we do a size update, which is a special case - always to the times passed in from the caller instead of the current time The only non-size caller of xfs_setattr that doesn't come from the VFS is updated to set ATTR_CTIME and pass in a valid ctime value. Reported-by: Eric Blake Signed-off-by: Christoph Hellwig Signed-off-by: Alex Elder --- fs/xfs/linux-2.6/xfs_acl.c | 3 +- fs/xfs/xfs_vnodeops.c | 93 ++++++++++++++++---------------------- 2 files changed, 41 insertions(+), 55 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_acl.c b/fs/xfs/linux-2.6/xfs_acl.c index 2512125dfa7c..883ca5ab8af5 100644 --- a/fs/xfs/linux-2.6/xfs_acl.c +++ b/fs/xfs/linux-2.6/xfs_acl.c @@ -251,8 +251,9 @@ xfs_set_mode(struct inode *inode, mode_t mode) if (mode != inode->i_mode) { struct iattr iattr; - iattr.ia_valid = ATTR_MODE; + iattr.ia_valid = ATTR_MODE | ATTR_CTIME; iattr.ia_mode = mode; + iattr.ia_ctime = current_fs_time(inode->i_sb); error = -xfs_setattr(XFS_I(inode), &iattr, XFS_ATTR_NOACL); } diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 6558ffd8d140..6f268756bf36 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -70,7 +70,6 @@ xfs_setattr( uint commit_flags=0; uid_t uid=0, iuid=0; gid_t gid=0, igid=0; - int timeflags = 0; struct xfs_dquot *udqp, *gdqp, *olddquot1, *olddquot2; int need_iolock = 1; @@ -135,16 +134,13 @@ xfs_setattr( if (flags & XFS_ATTR_NOLOCK) need_iolock = 0; if (!(mask & ATTR_SIZE)) { - if ((mask != (ATTR_CTIME|ATTR_ATIME|ATTR_MTIME)) || - (mp->m_flags & XFS_MOUNT_WSYNC)) { - tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE); - commit_flags = 0; - if ((code = xfs_trans_reserve(tp, 0, - XFS_ICHANGE_LOG_RES(mp), 0, - 0, 0))) { - lock_flags = 0; - goto error_return; - } + tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE); + commit_flags = 0; + code = xfs_trans_reserve(tp, 0, XFS_ICHANGE_LOG_RES(mp), + 0, 0, 0); + if (code) { + lock_flags = 0; + goto error_return; } } else { if (DM_EVENT_ENABLED(ip, DM_EVENT_TRUNCATE) && @@ -295,15 +291,23 @@ xfs_setattr( * or we are explicitly asked to change it. This handles * the semantic difference between truncate() and ftruncate() * as implemented in the VFS. + * + * The regular truncate() case without ATTR_CTIME and ATTR_MTIME + * is a special case where we need to update the times despite + * not having these flags set. For all other operations the + * VFS set these flags explicitly if it wants a timestamp + * update. */ - if (iattr->ia_size != ip->i_size || (mask & ATTR_CTIME)) - timeflags |= XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG; + if (iattr->ia_size != ip->i_size && + (!(mask & (ATTR_CTIME | ATTR_MTIME)))) { + iattr->ia_ctime = iattr->ia_mtime = + current_fs_time(inode->i_sb); + mask |= ATTR_CTIME | ATTR_MTIME; + } if (iattr->ia_size > ip->i_size) { ip->i_d.di_size = iattr->ia_size; ip->i_size = iattr->ia_size; - if (!(flags & XFS_ATTR_DMI)) - xfs_ichgtime(ip, XFS_ICHGTIME_CHG); xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); } else if (iattr->ia_size <= ip->i_size || (iattr->ia_size == 0 && ip->i_d.di_nextents)) { @@ -374,9 +378,6 @@ xfs_setattr( ip->i_d.di_gid = gid; inode->i_gid = gid; } - - xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE); - timeflags |= XFS_ICHGTIME_CHG; } /* @@ -393,51 +394,37 @@ xfs_setattr( inode->i_mode &= S_IFMT; inode->i_mode |= mode & ~S_IFMT; - - xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); - timeflags |= XFS_ICHGTIME_CHG; } /* * Change file access or modified times. */ - if (mask & (ATTR_ATIME|ATTR_MTIME)) { - if (mask & ATTR_ATIME) { - inode->i_atime = iattr->ia_atime; - ip->i_d.di_atime.t_sec = iattr->ia_atime.tv_sec; - ip->i_d.di_atime.t_nsec = iattr->ia_atime.tv_nsec; - ip->i_update_core = 1; - } - if (mask & ATTR_MTIME) { - inode->i_mtime = iattr->ia_mtime; - ip->i_d.di_mtime.t_sec = iattr->ia_mtime.tv_sec; - ip->i_d.di_mtime.t_nsec = iattr->ia_mtime.tv_nsec; - timeflags &= ~XFS_ICHGTIME_MOD; - timeflags |= XFS_ICHGTIME_CHG; - } - if (tp && (mask & (ATTR_MTIME_SET|ATTR_ATIME_SET))) - xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE); + if (mask & ATTR_ATIME) { + inode->i_atime = iattr->ia_atime; + ip->i_d.di_atime.t_sec = iattr->ia_atime.tv_sec; + ip->i_d.di_atime.t_nsec = iattr->ia_atime.tv_nsec; + ip->i_update_core = 1; } - - /* - * Change file inode change time only if ATTR_CTIME set - * AND we have been called by a DMI function. - */ - - if ((flags & XFS_ATTR_DMI) && (mask & ATTR_CTIME)) { + if (mask & ATTR_CTIME) { inode->i_ctime = iattr->ia_ctime; ip->i_d.di_ctime.t_sec = iattr->ia_ctime.tv_sec; ip->i_d.di_ctime.t_nsec = iattr->ia_ctime.tv_nsec; ip->i_update_core = 1; - timeflags &= ~XFS_ICHGTIME_CHG; + } + if (mask & ATTR_MTIME) { + inode->i_mtime = iattr->ia_mtime; + ip->i_d.di_mtime.t_sec = iattr->ia_mtime.tv_sec; + ip->i_d.di_mtime.t_nsec = iattr->ia_mtime.tv_nsec; + ip->i_update_core = 1; } /* - * Send out timestamp changes that need to be set to the - * current time. Not done when called by a DMI function. + * And finally, log the inode core if any attribute in it + * has been changed. */ - if (timeflags && !(flags & XFS_ATTR_DMI)) - xfs_ichgtime(ip, timeflags); + if (mask & (ATTR_UID|ATTR_GID|ATTR_MODE| + ATTR_ATIME|ATTR_CTIME|ATTR_MTIME)) + xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); XFS_STATS_INC(xs_ig_attrchg); @@ -452,12 +439,10 @@ xfs_setattr( * mix so this probably isn't worth the trouble to optimize. */ code = 0; - if (tp) { - if (mp->m_flags & XFS_MOUNT_WSYNC) - xfs_trans_set_sync(tp); + if (mp->m_flags & XFS_MOUNT_WSYNC) + xfs_trans_set_sync(tp); - code = xfs_trans_commit(tp, commit_flags); - } + code = xfs_trans_commit(tp, commit_flags); xfs_iunlock(ip, lock_flags); From 44e08c45cc14e6190a424be8d450070c8e508fad Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Sat, 2 Jan 2010 02:39:40 +0000 Subject: [PATCH 0576/1626] xfs: Don't flush stale inodes Because inodes remain in cache much longer than inode buffers do under memory pressure, we can get the situation where we have stale, dirty inodes being reclaimed but the backing storage has been freed. Hence we should never, ever flush XFS_ISTALE inodes to disk as there is no guarantee that the backing buffer is in cache and still marked stale when the flush occurs. Signed-off-by: Dave Chinner Signed-off-by: Alex Elder --- fs/xfs/xfs_inode.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index ce278b3ae7fc..391d36b0e68c 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -2841,10 +2841,14 @@ xfs_iflush( mp = ip->i_mount; /* - * If the inode isn't dirty, then just release the inode - * flush lock and do nothing. + * If the inode isn't dirty, then just release the inode flush lock and + * do nothing. Treat stale inodes the same; we cannot rely on the + * backing buffer remaining stale in cache for the remaining life of + * the stale inode and so xfs_itobp() below may give us a buffer that + * no longer contains inodes below. Doing this stale check here also + * avoids forcing the log on pinned, stale inodes. */ - if (xfs_inode_clean(ip)) { + if (xfs_inode_clean(ip) || xfs_iflags_test(ip, XFS_ISTALE)) { xfs_ifunlock(ip); return 0; } From fd45e4784164d1017521086524e3442318c67370 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Sat, 2 Jan 2010 02:38:56 +0000 Subject: [PATCH 0577/1626] xfs: Ensure we force all busy extents in range to disk When we search for and find a busy extent during allocation we force the log out to ensure the extent free transaction is on disk before the allocation transaction. The current implementation has a subtle bug in it--it does not handle multiple overlapping ranges. That is, if we free lots of little extents into a single contiguous extent, then allocate the contiguous extent, the busy search code stops searching at the first extent it finds that overlaps the allocated range. It then uses the commit LSN of the transaction to force the log out to. Unfortunately, the other busy ranges might have more recent commit LSNs than the first busy extent that is found, and this results in xfs_alloc_search_busy() returning before all the extent free transactions are on disk for the range being allocated. This can lead to potential metadata corruption or stale data exposure after a crash because log replay won't replay all the extent free transactions that cover the allocation range. Modified-by: Alex Elder (Dropped the "found" argument from the xfs_alloc_busysearch trace event.) Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Alex Elder --- fs/xfs/linux-2.6/xfs_trace.h | 12 +++++----- fs/xfs/xfs_alloc.c | 44 +++++++++++++++++------------------- 2 files changed, 27 insertions(+), 29 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_trace.h b/fs/xfs/linux-2.6/xfs_trace.h index 8cb42b4656fb..c22a608321a3 100644 --- a/fs/xfs/linux-2.6/xfs_trace.h +++ b/fs/xfs/linux-2.6/xfs_trace.h @@ -1079,28 +1079,28 @@ TRACE_EVENT(xfs_alloc_unbusy, TRACE_EVENT(xfs_alloc_busysearch, TP_PROTO(struct xfs_mount *mp, xfs_agnumber_t agno, xfs_agblock_t agbno, - xfs_extlen_t len, int found), - TP_ARGS(mp, agno, agbno, len, found), + xfs_extlen_t len, xfs_lsn_t lsn), + TP_ARGS(mp, agno, agbno, len, lsn), TP_STRUCT__entry( __field(dev_t, dev) __field(xfs_agnumber_t, agno) __field(xfs_agblock_t, agbno) __field(xfs_extlen_t, len) - __field(int, found) + __field(xfs_lsn_t, lsn) ), TP_fast_assign( __entry->dev = mp->m_super->s_dev; __entry->agno = agno; __entry->agbno = agbno; __entry->len = len; - __entry->found = found; + __entry->lsn = lsn; ), - TP_printk("dev %d:%d agno %u agbno %u len %u %s", + TP_printk("dev %d:%d agno %u agbno %u len %u force lsn 0x%llx", MAJOR(__entry->dev), MINOR(__entry->dev), __entry->agno, __entry->agbno, __entry->len, - __print_symbolic(__entry->found, XFS_BUSY_STATES)) + __entry->lsn) ); TRACE_EVENT(xfs_agf, diff --git a/fs/xfs/xfs_alloc.c b/fs/xfs/xfs_alloc.c index a1c65fc6d9c4..275b1f4f9430 100644 --- a/fs/xfs/xfs_alloc.c +++ b/fs/xfs/xfs_alloc.c @@ -2563,43 +2563,41 @@ xfs_alloc_search_busy(xfs_trans_t *tp, xfs_mount_t *mp; xfs_perag_busy_t *bsy; xfs_agblock_t uend, bend; - xfs_lsn_t lsn; + xfs_lsn_t lsn = 0; int cnt; mp = tp->t_mountp; spin_lock(&mp->m_perag[agno].pagb_lock); - cnt = mp->m_perag[agno].pagb_count; uend = bno + len - 1; - /* search pagb_list for this slot, skipping open slots */ - for (bsy = mp->m_perag[agno].pagb_list; cnt; bsy++) { + /* + * search pagb_list for this slot, skipping open slots. We have to + * search the entire array as there may be multiple overlaps and + * we have to get the most recent LSN for the log force to push out + * all the transactions that span the range. + */ + for (cnt = 0; cnt < mp->m_perag[agno].pagb_count; cnt++) { + bsy = &mp->m_perag[agno].pagb_list[cnt]; + if (!bsy->busy_tp) + continue; - /* - * (start1,length1) within (start2, length2) - */ - if (bsy->busy_tp != NULL) { - bend = bsy->busy_start + bsy->busy_length - 1; - if ((bno > bend) || (uend < bsy->busy_start)) { - cnt--; - } else { - break; - } - } + bend = bsy->busy_start + bsy->busy_length - 1; + if (bno > bend || uend < bsy->busy_start) + continue; + + /* (start1,length1) within (start2, length2) */ + if (XFS_LSN_CMP(bsy->busy_tp->t_commit_lsn, lsn) > 0) + lsn = bsy->busy_tp->t_commit_lsn; } - - trace_xfs_alloc_busysearch(mp, agno, bno, len, !!cnt); + spin_unlock(&mp->m_perag[agno].pagb_lock); + trace_xfs_alloc_busysearch(tp->t_mountp, agno, bno, len, lsn); /* * If a block was found, force the log through the LSN of the * transaction that freed the block */ - if (cnt) { - lsn = bsy->busy_tp->t_commit_lsn; - spin_unlock(&mp->m_perag[agno].pagb_lock); + if (lsn) xfs_log_force(mp, lsn, XFS_LOG_FORCE|XFS_LOG_SYNC); - } else { - spin_unlock(&mp->m_perag[agno].pagb_lock); - } } From bb595c923bc51dff9cdd112de18deb57ac7945d2 Mon Sep 17 00:00:00 2001 From: Roger Blofeld Date: Sun, 10 Jan 2010 20:52:32 +0100 Subject: [PATCH 0578/1626] hwmon: (adt7462) Fix pin 28 monitoring The ADT7462_PIN28_VOLT value is a 4-bit field, so the corresponding shift must be 4. Signed-off-by: Roger Blofeld Signed-off-by: Jean Delvare --- drivers/hwmon/adt7462.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c index a1a7ef14b519..a31e77c776ae 100644 --- a/drivers/hwmon/adt7462.c +++ b/drivers/hwmon/adt7462.c @@ -94,7 +94,7 @@ static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END }; #define ADT7462_PIN24_SHIFT 6 #define ADT7462_PIN26_VOLT_INPUT 0x08 #define ADT7462_PIN25_VOLT_INPUT 0x20 -#define ADT7462_PIN28_SHIFT 6 /* cfg3 */ +#define ADT7462_PIN28_SHIFT 4 /* cfg3 */ #define ADT7462_PIN28_VOLT 0x5 #define ADT7462_REG_ALARM1 0xB8 From 8ba406be53713efdd705666e2178cfe486fcfb27 Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Sun, 10 Jan 2010 20:52:33 +0100 Subject: [PATCH 0579/1626] hwmon: (asus_atk0110) Refactor interface probe code The behaviour is unmodified, this makes easier to override the heuristic (which is probably needed for some boards). Signed-off-by: Luca Tettamanti Signed-off-by: Jean Delvare --- drivers/hwmon/asus_atk0110.c | 98 ++++++++++++++++-------------------- 1 file changed, 44 insertions(+), 54 deletions(-) diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index 5a3ee00c0e7d..11739819badd 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -1047,76 +1047,75 @@ remove: return err; } -static int atk_check_old_if(struct atk_data *data) +static int atk_probe_if(struct atk_data *data) { struct device *dev = &data->acpi_dev->dev; acpi_handle ret; acpi_status status; + int err = 0; /* RTMP: read temperature */ status = acpi_get_handle(data->atk_handle, METHOD_OLD_READ_TMP, &ret); - if (status != AE_OK) { + if (ACPI_SUCCESS(status)) + data->rtmp_handle = ret; + else dev_dbg(dev, "method " METHOD_OLD_READ_TMP " not found: %s\n", acpi_format_exception(status)); - return -ENODEV; - } - data->rtmp_handle = ret; /* RVLT: read voltage */ status = acpi_get_handle(data->atk_handle, METHOD_OLD_READ_VLT, &ret); - if (status != AE_OK) { + if (ACPI_SUCCESS(status)) + data->rvlt_handle = ret; + else dev_dbg(dev, "method " METHOD_OLD_READ_VLT " not found: %s\n", acpi_format_exception(status)); - return -ENODEV; - } - data->rvlt_handle = ret; /* RFAN: read fan status */ status = acpi_get_handle(data->atk_handle, METHOD_OLD_READ_FAN, &ret); - if (status != AE_OK) { + if (ACPI_SUCCESS(status)) + data->rfan_handle = ret; + else dev_dbg(dev, "method " METHOD_OLD_READ_FAN " not found: %s\n", acpi_format_exception(status)); - return -ENODEV; - } - data->rfan_handle = ret; - - return 0; -} - -static int atk_check_new_if(struct atk_data *data) -{ - struct device *dev = &data->acpi_dev->dev; - acpi_handle ret; - acpi_status status; /* Enumeration */ status = acpi_get_handle(data->atk_handle, METHOD_ENUMERATE, &ret); - if (status != AE_OK) { + if (ACPI_SUCCESS(status)) + data->enumerate_handle = ret; + else dev_dbg(dev, "method " METHOD_ENUMERATE " not found: %s\n", acpi_format_exception(status)); - return -ENODEV; - } - data->enumerate_handle = ret; /* De-multiplexer (read) */ status = acpi_get_handle(data->atk_handle, METHOD_READ, &ret); - if (status != AE_OK) { + if (ACPI_SUCCESS(status)) + data->read_handle = ret; + else dev_dbg(dev, "method " METHOD_READ " not found: %s\n", acpi_format_exception(status)); - return -ENODEV; - } - data->read_handle = ret; /* De-multiplexer (write) */ status = acpi_get_handle(data->atk_handle, METHOD_WRITE, &ret); - if (status != AE_OK) { - dev_dbg(dev, "method " METHOD_READ " not found: %s\n", + if (ACPI_SUCCESS(status)) + data->write_handle = ret; + else + dev_dbg(dev, "method " METHOD_WRITE " not found: %s\n", acpi_format_exception(status)); - return -ENODEV; - } - data->write_handle = ret; - return 0; + /* Check for hwmon methods: first check "old" style methods; note that + * both may be present: in this case we stick to the old interface; + * analysis of multiple DSDTs indicates that when both interfaces + * are present the new one (GGRP/GITM) is not functional. + */ + if (data->rtmp_handle && data->rvlt_handle && data->rfan_handle) + data->old_interface = true; + else if (data->enumerate_handle && data->read_handle && + data->write_handle) + data->old_interface = false; + else + err = -ENODEV; + + return err; } static int atk_add(struct acpi_device *device) @@ -1155,28 +1154,19 @@ static int atk_add(struct acpi_device *device) } ACPI_FREE(buf.pointer); - /* Check for hwmon methods: first check "old" style methods; note that - * both may be present: in this case we stick to the old interface; - * analysis of multiple DSDTs indicates that when both interfaces - * are present the new one (GGRP/GITM) is not functional. - */ - err = atk_check_old_if(data); - if (!err) { - dev_dbg(&device->dev, "Using old hwmon interface\n"); - data->old_interface = true; - } else { - err = atk_check_new_if(data); - if (err) - goto out; - - dev_dbg(&device->dev, "Using new hwmon interface\n"); - data->old_interface = false; + err = atk_probe_if(data); + if (err) { + dev_err(&device->dev, "No usable hwmon interface detected\n"); + goto out; } - if (data->old_interface) + if (data->old_interface) { + dev_dbg(&device->dev, "Using old hwmon interface\n"); err = atk_enumerate_old_hwmon(data); - else + } else { + dev_dbg(&device->dev, "Using new hwmon interface\n"); err = atk_enumerate_new_hwmon(data); + } if (err < 0) goto out; if (err == 0) { From 7e5eab1128a05b99b8c81c01ff6515a3ca25e5aa Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Sun, 10 Jan 2010 20:52:33 +0100 Subject: [PATCH 0580/1626] hwmon: (asus_atk0110) Add debugfs interface Expose the raw GGRP/GITM interface via debugfs. The hwmon interface is reverse engineered and the driver tends to break on newer boards... Using this interface it's possible to poke directly at the ACPI methods without the need to recompile, reducing the guesswork and the round trips needed to support a new revision of the interface. Signed-off-by: Luca Tettamanti Signed-off-by: Jean Delvare --- drivers/hwmon/asus_atk0110.c | 191 +++++++++++++++++++++++++++++++++++ 1 file changed, 191 insertions(+) diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index 11739819badd..6811346c1c62 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -5,6 +5,7 @@ * See COPYING in the top level directory of the kernel tree. */ +#include #include #include #include @@ -101,6 +102,11 @@ struct atk_data { int temperature_count; int fan_count; struct list_head sensor_list; + + struct { + struct dentry *root; + u32 id; + } debugfs; }; @@ -624,6 +630,187 @@ static int atk_read_value(struct atk_sensor_data *sensor, u64 *value) return err; } +#ifdef CONFIG_DEBUG_FS +static int atk_debugfs_gitm_get(void *p, u64 *val) +{ + struct atk_data *data = p; + union acpi_object *ret; + struct atk_acpi_ret_buffer *buf; + int err = 0; + + if (!data->read_handle) + return -ENODEV; + + if (!data->debugfs.id) + return -EINVAL; + + ret = atk_gitm(data, data->debugfs.id); + if (IS_ERR(ret)) + return PTR_ERR(ret); + + buf = (struct atk_acpi_ret_buffer *)ret->buffer.pointer; + if (buf->flags) + *val = buf->value; + else + err = -EIO; + + return err; +} + +DEFINE_SIMPLE_ATTRIBUTE(atk_debugfs_gitm, + atk_debugfs_gitm_get, + NULL, + "0x%08llx\n") + +static int atk_acpi_print(char *buf, size_t sz, union acpi_object *obj) +{ + int ret = 0; + + switch (obj->type) { + case ACPI_TYPE_INTEGER: + ret = snprintf(buf, sz, "0x%08llx\n", obj->integer.value); + break; + case ACPI_TYPE_STRING: + ret = snprintf(buf, sz, "%s\n", obj->string.pointer); + break; + } + + return ret; +} + +static void atk_pack_print(char *buf, size_t sz, union acpi_object *pack) +{ + int ret; + int i; + + for (i = 0; i < pack->package.count; i++) { + union acpi_object *obj = &pack->package.elements[i]; + + ret = atk_acpi_print(buf, sz, obj); + if (ret >= sz) + break; + buf += ret; + sz -= ret; + } +} + +static int atk_debugfs_ggrp_open(struct inode *inode, struct file *file) +{ + struct atk_data *data = inode->i_private; + char *buf = NULL; + union acpi_object *ret; + u8 cls; + int i; + + if (!data->enumerate_handle) + return -ENODEV; + if (!data->debugfs.id) + return -EINVAL; + + cls = (data->debugfs.id & 0xff000000) >> 24; + ret = atk_ggrp(data, cls); + if (IS_ERR(ret)) + return PTR_ERR(ret); + + for (i = 0; i < ret->package.count; i++) { + union acpi_object *pack = &ret->package.elements[i]; + union acpi_object *id; + + if (pack->type != ACPI_TYPE_PACKAGE) + continue; + if (!pack->package.count) + continue; + id = &pack->package.elements[0]; + if (id->integer.value == data->debugfs.id) { + /* Print the package */ + buf = kzalloc(512, GFP_KERNEL); + if (!buf) { + ACPI_FREE(ret); + return -ENOMEM; + } + atk_pack_print(buf, 512, pack); + break; + } + } + ACPI_FREE(ret); + + if (!buf) + return -EINVAL; + + file->private_data = buf; + + return nonseekable_open(inode, file); +} + +static ssize_t atk_debugfs_ggrp_read(struct file *file, char __user *buf, + size_t count, loff_t *pos) +{ + char *str = file->private_data; + size_t len = strlen(str); + + return simple_read_from_buffer(buf, count, pos, str, len); +} + +static int atk_debugfs_ggrp_release(struct inode *inode, struct file *file) +{ + kfree(file->private_data); + return 0; +} + +static const struct file_operations atk_debugfs_ggrp_fops = { + .read = atk_debugfs_ggrp_read, + .open = atk_debugfs_ggrp_open, + .release = atk_debugfs_ggrp_release, +}; + +static void atk_debugfs_init(struct atk_data *data) +{ + struct dentry *d; + struct dentry *f; + + data->debugfs.id = 0; + + d = debugfs_create_dir("asus_atk0110", NULL); + if (!d || IS_ERR(d)) + return; + + f = debugfs_create_x32("id", S_IRUSR | S_IWUSR, d, &data->debugfs.id); + if (!f || IS_ERR(f)) + goto cleanup; + + f = debugfs_create_file("gitm", S_IRUSR, d, data, + &atk_debugfs_gitm); + if (!f || IS_ERR(f)) + goto cleanup; + + f = debugfs_create_file("ggrp", S_IRUSR, d, data, + &atk_debugfs_ggrp_fops); + if (!f || IS_ERR(f)) + goto cleanup; + + data->debugfs.root = d; + + return; +cleanup: + debugfs_remove_recursive(d); +} + +static void atk_debugfs_cleanup(struct atk_data *data) +{ + debugfs_remove_recursive(data->debugfs.root); +} + +#else /* CONFIG_DEBUG_FS */ + +static void atk_debugfs_init(struct atk_data *data) +{ +} + +static void atk_debugfs_cleanup(struct atk_data *data) +{ +} +#endif + static int atk_add_sensor(struct atk_data *data, union acpi_object *obj) { struct device *dev = &data->acpi_dev->dev; @@ -1180,6 +1367,8 @@ static int atk_add(struct acpi_device *device) if (err) goto cleanup; + atk_debugfs_init(data); + device->driver_data = data; return 0; cleanup: @@ -1198,6 +1387,8 @@ static int atk_remove(struct acpi_device *device, int type) device->driver_data = NULL; + atk_debugfs_cleanup(data); + atk_remove_files(data); atk_free_sensors(data); hwmon_device_unregister(data->hwmon_dev); From c5114a1cd6d84b2b3144c1c3e093c80ca6c30f47 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 10 Jan 2010 20:52:34 +0100 Subject: [PATCH 0581/1626] hwmon: (k10temp) Blacklist more family 10h processors The latest version of the Revision Guide for AMD Family 10h Processors lists two more processor revisions which may be affected by erratum 319. Change the blacklisting code to correctly detect those processors, by implementing AMD's recommended algorithm. Signed-off-by: Clemens Ladisch Signed-off-by: Jean Delvare Cc: Andreas Herrmann --- Documentation/hwmon/k10temp | 17 +++++++++++------ drivers/hwmon/k10temp.c | 38 +++++++++++++++++++++++++++++++------ 2 files changed, 43 insertions(+), 12 deletions(-) diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp index a7a18d453a51..6526eee525a6 100644 --- a/Documentation/hwmon/k10temp +++ b/Documentation/hwmon/k10temp @@ -3,8 +3,8 @@ Kernel driver k10temp Supported chips: * AMD Family 10h processors: - Socket F: Quad-Core/Six-Core/Embedded Opteron - Socket AM2+: Opteron, Phenom (II) X3/X4 + Socket F: Quad-Core/Six-Core/Embedded Opteron (but see below) + Socket AM2+: Quad-Core Opteron, Phenom (II) X3/X4, Athlon X2 (but see below) Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II Socket S1G3: Athlon II, Sempron, Turion II * AMD Family 11h processors: @@ -36,10 +36,15 @@ Description This driver permits reading of the internal temperature sensor of AMD Family 10h and 11h processors. -All these processors have a sensor, but on older revisions of Family 10h -processors, the sensor may return inconsistent values (erratum 319). The -driver will refuse to load on these revisions unless you specify the -"force=1" module parameter. +All these processors have a sensor, but on those for Socket F or AM2+, +the sensor may return inconsistent values (erratum 319). The driver +will refuse to load on these revisions unless you specify the "force=1" +module parameter. + +Due to technical reasons, the driver can detect only the mainboard's +socket type, not the processor's actual capabilities. Therefore, if you +are using an AM3 processor on an AM2+ mainboard, you can safely use the +"force=1" parameter. There is one temperature measurement value, available as temp1_input in sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree. diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index d8a26d16d948..4c9d349b3ad9 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -33,6 +33,16 @@ static bool force; module_param(force, bool, 0444); MODULE_PARM_DESC(force, "force loading on processors with erratum 319"); +/* CPUID function 0x80000001, ebx */ +#define CPUID_PKGTYPE_MASK 0xf0000000 +#define CPUID_PKGTYPE_F 0x00000000 +#define CPUID_PKGTYPE_AM2R2_AM3 0x10000000 + +/* DRAM controller (PCI function 2) */ +#define REG_DCT0_CONFIG_HIGH 0x094 +#define DDR3_MODE 0x00000100 + +/* miscellaneous (PCI function 3) */ #define REG_HARDWARE_THERMAL_CONTROL 0x64 #define HTC_ENABLE 0x00000001 @@ -85,13 +95,28 @@ static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit, NULL, 1); static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); -static bool __devinit has_erratum_319(void) +static bool __devinit has_erratum_319(struct pci_dev *pdev) { + u32 pkg_type, reg_dram_cfg; + + if (boot_cpu_data.x86 != 0x10) + return false; + /* - * Erratum 319: The thermal sensor of older Family 10h processors - * (B steppings) may be unreliable. + * Erratum 319: The thermal sensor of Socket F/AM2+ processors + * may be unreliable. */ - return boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model <= 2; + pkg_type = cpuid_ebx(0x80000001) & CPUID_PKGTYPE_MASK; + if (pkg_type == CPUID_PKGTYPE_F) + return true; + if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3) + return false; + + /* Differentiate between AM2+ (bad) and AM3 (good) */ + pci_bus_read_config_dword(pdev->bus, + PCI_DEVFN(PCI_SLOT(pdev->devfn), 2), + REG_DCT0_CONFIG_HIGH, ®_dram_cfg); + return !(reg_dram_cfg & DDR3_MODE); } static int __devinit k10temp_probe(struct pci_dev *pdev, @@ -99,9 +124,10 @@ static int __devinit k10temp_probe(struct pci_dev *pdev, { struct device *hwmon_dev; u32 reg_caps, reg_htc; + int unreliable = has_erratum_319(pdev); int err; - if (has_erratum_319() && !force) { + if (unreliable && !force) { dev_err(&pdev->dev, "unreliable CPU thermal sensor; monitoring disabled\n"); err = -ENODEV; @@ -139,7 +165,7 @@ static int __devinit k10temp_probe(struct pci_dev *pdev, } dev_set_drvdata(&pdev->dev, hwmon_dev); - if (has_erratum_319() && force) + if (unreliable && force) dev_warn(&pdev->dev, "unreliable CPU thermal sensor; check erratum 319\n"); return 0; From 1fe63ab47a617ee95f562eaa7ddbbc59981ff8c6 Mon Sep 17 00:00:00 2001 From: Yong Wang Date: Sun, 10 Jan 2010 20:52:34 +0100 Subject: [PATCH 0582/1626] hwmon: (coretemp) Fix TjMax for Atom N450/D410/D510 CPUs The max junction temperature of Atom N450/D410/D510 CPUs is 100 degrees Celsius. Since these CPUs are always coupled with Intel NM10 chipset in one package, the best way to verify whether an Atom CPU is N450/D410/D510 is to check the host bridge device. Signed-off-by: Yong Wang Acked-by: Huaxu Wan Signed-off-by: Jean Delvare --- drivers/hwmon/Kconfig | 2 +- drivers/hwmon/coretemp.c | 16 ++++++++++++++-- 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 46c3c566307e..435ae72fc47a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -392,7 +392,7 @@ config SENSORS_GL520SM config SENSORS_CORETEMP tristate "Intel Core/Core2/Atom temperature sensor" - depends on X86 && EXPERIMENTAL + depends on X86 && PCI && EXPERIMENTAL help If you say yes here you get support for the temperature sensor inside your CPU. Most of the family 6 CPUs diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index caef39cda8c8..2d7bceeed0bc 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -161,6 +162,7 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device * int usemsr_ee = 1; int err; u32 eax, edx; + struct pci_dev *host_bridge; /* Early chips have no MSR for TjMax */ @@ -168,11 +170,21 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device * usemsr_ee = 0; } - /* Atoms seems to have TjMax at 90C */ + /* Atom CPUs */ if (c->x86_model == 0x1c) { usemsr_ee = 0; - tjmax = 90000; + + host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); + + if (host_bridge && host_bridge->vendor == PCI_VENDOR_ID_INTEL + && (host_bridge->device == 0xa000 /* NM10 based nettop */ + || host_bridge->device == 0xa010)) /* NM10 based netbook */ + tjmax = 100000; + else + tjmax = 90000; + + pci_dev_put(host_bridge); } if ((c->x86_model > 0xe) && (usemsr_ee)) { From 3dd3a156355e7e6bec0dc9a0bbb6eeecbd965d50 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?M=C3=A1rton=20N=C3=A9meth?= Date: Sun, 10 Jan 2010 20:52:35 +0100 Subject: [PATCH 0583/1626] hwmon: Make PCI device ids constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The id_table field of the struct pci_driver is constant in so it is worth to make pci_device_id also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Márton Németh Cc: Julia Lawall Signed-off-by: Jean Delvare --- drivers/hwmon/k10temp.c | 2 +- drivers/hwmon/k8temp.c | 2 +- drivers/hwmon/sis5595.c | 2 +- drivers/hwmon/via686a.c | 2 +- drivers/hwmon/vt8231.c | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index 4c9d349b3ad9..099a2138cdf6 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -195,7 +195,7 @@ static void __devexit k10temp_remove(struct pci_dev *pdev) dev_set_drvdata(&pdev->dev, NULL); } -static struct pci_device_id k10temp_id_table[] = { +static const struct pci_device_id k10temp_id_table[] = { { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) }, {} diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c index 1fe995111841..0ceb6d6200a3 100644 --- a/drivers/hwmon/k8temp.c +++ b/drivers/hwmon/k8temp.c @@ -136,7 +136,7 @@ static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 1, 0); static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 1, 1); static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); -static struct pci_device_id k8temp_ids[] = { +static const struct pci_device_id k8temp_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) }, { 0 }, }; diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c index 12f2e7086560..79c2931e3008 100644 --- a/drivers/hwmon/sis5595.c +++ b/drivers/hwmon/sis5595.c @@ -697,7 +697,7 @@ static struct sis5595_data *sis5595_update_device(struct device *dev) return data; } -static struct pci_device_id sis5595_pci_ids[] = { +static const struct pci_device_id sis5595_pci_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, { 0, } }; diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 39e82a492f26..f397ce7ad598 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -767,7 +767,7 @@ static struct via686a_data *via686a_update_device(struct device *dev) return data; } -static struct pci_device_id via686a_pci_ids[] = { +static const struct pci_device_id via686a_pci_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4) }, { 0, } }; diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c index 470a1226ba2b..d47b4c9949c2 100644 --- a/drivers/hwmon/vt8231.c +++ b/drivers/hwmon/vt8231.c @@ -697,7 +697,7 @@ static struct platform_driver vt8231_driver = { .remove = __devexit_p(vt8231_remove), }; -static struct pci_device_id vt8231_pci_ids[] = { +static const struct pci_device_id vt8231_pci_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4) }, { 0, } }; From fa15e99b6bb44aa86b241a43ca8c509e91f80153 Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Sun, 10 Jan 2010 13:40:10 -0800 Subject: [PATCH 0584/1626] vxge: use pci_dma_mapping_error to test return value pci_dma_mapping_error should be used to test return value of pci_map_single or pci_map_page. Signed-off-by: Denis Kirjanov Signed-off-by: David S. Miller --- drivers/net/vxge/vxge-main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c index 0fdfd58a35a1..b9685e82f7b6 100644 --- a/drivers/net/vxge/vxge-main.c +++ b/drivers/net/vxge/vxge-main.c @@ -310,7 +310,7 @@ static int vxge_rx_map(void *dtrh, struct vxge_ring *ring) dma_addr = pci_map_single(ring->pdev, rx_priv->skb_data, rx_priv->data_size, PCI_DMA_FROMDEVICE); - if (dma_addr == 0) { + if (unlikely(pci_dma_mapping_error(ring->pdev, dma_addr))) { ring->stats.pci_map_fail++; return -EIO; } From 588d7d1268658b6a010eb7415bff2f936c51acf7 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sun, 13 Dec 2009 20:07:42 +0100 Subject: [PATCH 0585/1626] drm/nouveau: Add cache_flush/pull fifo engine functions. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_drv.h | 4 +++ drivers/gpu/drm/nouveau/nouveau_state.c | 10 ++++++++ drivers/gpu/drm/nouveau/nv04_fifo.c | 34 +++++++++++++++++++++++++ 3 files changed, 48 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 5f8cbb79c499..48d0ad9434a8 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -292,6 +292,8 @@ struct nouveau_fifo_engine { void (*disable)(struct drm_device *); void (*enable)(struct drm_device *); bool (*reassign)(struct drm_device *, bool enable); + bool (*cache_flush)(struct drm_device *dev); + bool (*cache_pull)(struct drm_device *dev, bool enable); int (*channel_id)(struct drm_device *); @@ -889,6 +891,8 @@ extern int nv04_fifo_init(struct drm_device *); extern void nv04_fifo_disable(struct drm_device *); extern void nv04_fifo_enable(struct drm_device *); extern bool nv04_fifo_reassign(struct drm_device *, bool); +extern bool nv04_fifo_cache_flush(struct drm_device *); +extern bool nv04_fifo_cache_pull(struct drm_device *, bool); extern int nv04_fifo_channel_id(struct drm_device *); extern int nv04_fifo_create_context(struct nouveau_channel *); extern void nv04_fifo_destroy_context(struct nouveau_channel *); diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index e76ec2d207a9..9f988431f34c 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -76,6 +76,8 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->fifo.disable = nv04_fifo_disable; engine->fifo.enable = nv04_fifo_enable; engine->fifo.reassign = nv04_fifo_reassign; + engine->fifo.cache_flush = nv04_fifo_cache_flush; + engine->fifo.cache_pull = nv04_fifo_cache_pull; engine->fifo.channel_id = nv04_fifo_channel_id; engine->fifo.create_context = nv04_fifo_create_context; engine->fifo.destroy_context = nv04_fifo_destroy_context; @@ -115,6 +117,8 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->fifo.disable = nv04_fifo_disable; engine->fifo.enable = nv04_fifo_enable; engine->fifo.reassign = nv04_fifo_reassign; + engine->fifo.cache_flush = nv04_fifo_cache_flush; + engine->fifo.cache_pull = nv04_fifo_cache_pull; engine->fifo.channel_id = nv10_fifo_channel_id; engine->fifo.create_context = nv10_fifo_create_context; engine->fifo.destroy_context = nv10_fifo_destroy_context; @@ -154,6 +158,8 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->fifo.disable = nv04_fifo_disable; engine->fifo.enable = nv04_fifo_enable; engine->fifo.reassign = nv04_fifo_reassign; + engine->fifo.cache_flush = nv04_fifo_cache_flush; + engine->fifo.cache_pull = nv04_fifo_cache_pull; engine->fifo.channel_id = nv10_fifo_channel_id; engine->fifo.create_context = nv10_fifo_create_context; engine->fifo.destroy_context = nv10_fifo_destroy_context; @@ -193,6 +199,8 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->fifo.disable = nv04_fifo_disable; engine->fifo.enable = nv04_fifo_enable; engine->fifo.reassign = nv04_fifo_reassign; + engine->fifo.cache_flush = nv04_fifo_cache_flush; + engine->fifo.cache_pull = nv04_fifo_cache_pull; engine->fifo.channel_id = nv10_fifo_channel_id; engine->fifo.create_context = nv10_fifo_create_context; engine->fifo.destroy_context = nv10_fifo_destroy_context; @@ -233,6 +241,8 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->fifo.disable = nv04_fifo_disable; engine->fifo.enable = nv04_fifo_enable; engine->fifo.reassign = nv04_fifo_reassign; + engine->fifo.cache_flush = nv04_fifo_cache_flush; + engine->fifo.cache_pull = nv04_fifo_cache_pull; engine->fifo.channel_id = nv10_fifo_channel_id; engine->fifo.create_context = nv40_fifo_create_context; engine->fifo.destroy_context = nv40_fifo_destroy_context; diff --git a/drivers/gpu/drm/nouveau/nv04_fifo.c b/drivers/gpu/drm/nouveau/nv04_fifo.c index 0c3cd53c7313..f31347b8c9b0 100644 --- a/drivers/gpu/drm/nouveau/nv04_fifo.c +++ b/drivers/gpu/drm/nouveau/nv04_fifo.c @@ -71,6 +71,40 @@ nv04_fifo_reassign(struct drm_device *dev, bool enable) return (reassign == 1); } +bool +nv04_fifo_cache_flush(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_timer_engine *ptimer = &dev_priv->engine.timer; + uint64_t start = ptimer->read(dev); + + do { + if (nv_rd32(dev, NV03_PFIFO_CACHE1_GET) == + nv_rd32(dev, NV03_PFIFO_CACHE1_PUT)) + return true; + + } while (ptimer->read(dev) - start < 100000000); + + NV_ERROR(dev, "Timeout flushing the PFIFO cache.\n"); + + return false; +} + +bool +nv04_fifo_cache_pull(struct drm_device *dev, bool enable) +{ + uint32_t pull = nv_rd32(dev, NV04_PFIFO_CACHE1_PULL0); + + if (enable) { + nv_wr32(dev, NV04_PFIFO_CACHE1_PULL0, pull | 1); + } else { + nv_wr32(dev, NV04_PFIFO_CACHE1_PULL0, pull & ~1); + nv_wr32(dev, NV04_PFIFO_CACHE1_HASH, 0); + } + + return !!(pull & 1); +} + int nv04_fifo_channel_id(struct drm_device *dev) { From cb00f7c1419d09ee0daf7d8bed86f253d98db7b4 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Wed, 16 Dec 2009 12:12:27 +0100 Subject: [PATCH 0586/1626] drm/nouveau: Pre-G80 tiling support. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_drv.h | 18 ++++ drivers/gpu/drm/nouveau/nouveau_reg.h | 16 ++-- drivers/gpu/drm/nouveau/nouveau_state.c | 8 ++ drivers/gpu/drm/nouveau/nv10_fb.c | 32 +++++-- drivers/gpu/drm/nouveau/nv10_graph.c | 28 +++--- drivers/gpu/drm/nouveau/nv20_graph.c | 61 ++++++------- drivers/gpu/drm/nouveau/nv40_fb.c | 53 +++++++---- drivers/gpu/drm/nouveau/nv40_graph.c | 116 ++++++++++-------------- 8 files changed, 185 insertions(+), 147 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 48d0ad9434a8..446a92ad2eef 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -277,8 +277,13 @@ struct nouveau_timer_engine { }; struct nouveau_fb_engine { + int num_tiles; + int (*init)(struct drm_device *dev); void (*takedown)(struct drm_device *dev); + + void (*set_region_tiling)(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch); }; struct nouveau_fifo_engine { @@ -332,6 +337,9 @@ struct nouveau_pgraph_engine { void (*destroy_context)(struct nouveau_channel *); int (*load_context)(struct nouveau_channel *); int (*unload_context)(struct drm_device *); + + void (*set_region_tiling)(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch); }; struct nouveau_engine { @@ -881,10 +889,14 @@ extern void nv04_fb_takedown(struct drm_device *); /* nv10_fb.c */ extern int nv10_fb_init(struct drm_device *); extern void nv10_fb_takedown(struct drm_device *); +extern void nv10_fb_set_region_tiling(struct drm_device *, int, uint32_t, + uint32_t, uint32_t); /* nv40_fb.c */ extern int nv40_fb_init(struct drm_device *); extern void nv40_fb_takedown(struct drm_device *); +extern void nv40_fb_set_region_tiling(struct drm_device *, int, uint32_t, + uint32_t, uint32_t); /* nv04_fifo.c */ extern int nv04_fifo_init(struct drm_device *); @@ -945,6 +957,8 @@ extern void nv10_graph_destroy_context(struct nouveau_channel *); extern int nv10_graph_load_context(struct nouveau_channel *); extern int nv10_graph_unload_context(struct drm_device *); extern void nv10_graph_context_switch(struct drm_device *); +extern void nv10_graph_set_region_tiling(struct drm_device *, int, uint32_t, + uint32_t, uint32_t); /* nv20_graph.c */ extern struct nouveau_pgraph_object_class nv20_graph_grclass[]; @@ -956,6 +970,8 @@ extern int nv20_graph_unload_context(struct drm_device *); extern int nv20_graph_init(struct drm_device *); extern void nv20_graph_takedown(struct drm_device *); extern int nv30_graph_init(struct drm_device *); +extern void nv20_graph_set_region_tiling(struct drm_device *, int, uint32_t, + uint32_t, uint32_t); /* nv40_graph.c */ extern struct nouveau_pgraph_object_class nv40_graph_grclass[]; @@ -967,6 +983,8 @@ extern void nv40_graph_destroy_context(struct nouveau_channel *); extern int nv40_graph_load_context(struct nouveau_channel *); extern int nv40_graph_unload_context(struct drm_device *); extern void nv40_grctx_init(struct nouveau_grctx *); +extern void nv40_graph_set_region_tiling(struct drm_device *, int, uint32_t, + uint32_t, uint32_t); /* nv50_graph.c */ extern struct nouveau_pgraph_object_class nv50_graph_grclass[]; diff --git a/drivers/gpu/drm/nouveau/nouveau_reg.h b/drivers/gpu/drm/nouveau/nouveau_reg.h index fa1b0e7165b9..251f1b3b38b9 100644 --- a/drivers/gpu/drm/nouveau/nouveau_reg.h +++ b/drivers/gpu/drm/nouveau/nouveau_reg.h @@ -349,19 +349,19 @@ #define NV04_PGRAPH_BLEND 0x00400824 #define NV04_PGRAPH_STORED_FMT 0x00400830 #define NV04_PGRAPH_PATT_COLORRAM 0x00400900 -#define NV40_PGRAPH_TILE0(i) (0x00400900 + (i*16)) -#define NV40_PGRAPH_TLIMIT0(i) (0x00400904 + (i*16)) -#define NV40_PGRAPH_TSIZE0(i) (0x00400908 + (i*16)) -#define NV40_PGRAPH_TSTATUS0(i) (0x0040090C + (i*16)) +#define NV20_PGRAPH_TILE(i) (0x00400900 + (i*16)) +#define NV20_PGRAPH_TLIMIT(i) (0x00400904 + (i*16)) +#define NV20_PGRAPH_TSIZE(i) (0x00400908 + (i*16)) +#define NV20_PGRAPH_TSTATUS(i) (0x0040090C + (i*16)) #define NV10_PGRAPH_TILE(i) (0x00400B00 + (i*16)) #define NV10_PGRAPH_TLIMIT(i) (0x00400B04 + (i*16)) #define NV10_PGRAPH_TSIZE(i) (0x00400B08 + (i*16)) #define NV10_PGRAPH_TSTATUS(i) (0x00400B0C + (i*16)) #define NV04_PGRAPH_U_RAM 0x00400D00 -#define NV47_PGRAPH_TILE0(i) (0x00400D00 + (i*16)) -#define NV47_PGRAPH_TLIMIT0(i) (0x00400D04 + (i*16)) -#define NV47_PGRAPH_TSIZE0(i) (0x00400D08 + (i*16)) -#define NV47_PGRAPH_TSTATUS0(i) (0x00400D0C + (i*16)) +#define NV47_PGRAPH_TILE(i) (0x00400D00 + (i*16)) +#define NV47_PGRAPH_TLIMIT(i) (0x00400D04 + (i*16)) +#define NV47_PGRAPH_TSIZE(i) (0x00400D08 + (i*16)) +#define NV47_PGRAPH_TSTATUS(i) (0x00400D0C + (i*16)) #define NV04_PGRAPH_V_RAM 0x00400D40 #define NV04_PGRAPH_W_RAM 0x00400D80 #define NV10_PGRAPH_COMBINER0_IN_ALPHA 0x00400E40 diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 9f988431f34c..6a459139910f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -102,6 +102,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->timer.takedown = nv04_timer_takedown; engine->fb.init = nv10_fb_init; engine->fb.takedown = nv10_fb_takedown; + engine->fb.set_region_tiling = nv10_fb_set_region_tiling; engine->graph.grclass = nv10_graph_grclass; engine->graph.init = nv10_graph_init; engine->graph.takedown = nv10_graph_takedown; @@ -111,6 +112,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->graph.fifo_access = nv04_graph_fifo_access; engine->graph.load_context = nv10_graph_load_context; engine->graph.unload_context = nv10_graph_unload_context; + engine->graph.set_region_tiling = nv10_graph_set_region_tiling; engine->fifo.channels = 32; engine->fifo.init = nv10_fifo_init; engine->fifo.takedown = nouveau_stub_takedown; @@ -143,6 +145,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->timer.takedown = nv04_timer_takedown; engine->fb.init = nv10_fb_init; engine->fb.takedown = nv10_fb_takedown; + engine->fb.set_region_tiling = nv10_fb_set_region_tiling; engine->graph.grclass = nv20_graph_grclass; engine->graph.init = nv20_graph_init; engine->graph.takedown = nv20_graph_takedown; @@ -152,6 +155,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->graph.fifo_access = nv04_graph_fifo_access; engine->graph.load_context = nv20_graph_load_context; engine->graph.unload_context = nv20_graph_unload_context; + engine->graph.set_region_tiling = nv20_graph_set_region_tiling; engine->fifo.channels = 32; engine->fifo.init = nv10_fifo_init; engine->fifo.takedown = nouveau_stub_takedown; @@ -184,6 +188,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->timer.takedown = nv04_timer_takedown; engine->fb.init = nv10_fb_init; engine->fb.takedown = nv10_fb_takedown; + engine->fb.set_region_tiling = nv10_fb_set_region_tiling; engine->graph.grclass = nv30_graph_grclass; engine->graph.init = nv30_graph_init; engine->graph.takedown = nv20_graph_takedown; @@ -193,6 +198,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->graph.destroy_context = nv20_graph_destroy_context; engine->graph.load_context = nv20_graph_load_context; engine->graph.unload_context = nv20_graph_unload_context; + engine->graph.set_region_tiling = nv20_graph_set_region_tiling; engine->fifo.channels = 32; engine->fifo.init = nv10_fifo_init; engine->fifo.takedown = nouveau_stub_takedown; @@ -226,6 +232,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->timer.takedown = nv04_timer_takedown; engine->fb.init = nv40_fb_init; engine->fb.takedown = nv40_fb_takedown; + engine->fb.set_region_tiling = nv40_fb_set_region_tiling; engine->graph.grclass = nv40_graph_grclass; engine->graph.init = nv40_graph_init; engine->graph.takedown = nv40_graph_takedown; @@ -235,6 +242,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->graph.destroy_context = nv40_graph_destroy_context; engine->graph.load_context = nv40_graph_load_context; engine->graph.unload_context = nv40_graph_unload_context; + engine->graph.set_region_tiling = nv40_graph_set_region_tiling; engine->fifo.channels = 32; engine->fifo.init = nv40_fifo_init; engine->fifo.takedown = nouveau_stub_takedown; diff --git a/drivers/gpu/drm/nouveau/nv10_fb.c b/drivers/gpu/drm/nouveau/nv10_fb.c index 79e2d104d70a..cc5cda44e501 100644 --- a/drivers/gpu/drm/nouveau/nv10_fb.c +++ b/drivers/gpu/drm/nouveau/nv10_fb.c @@ -3,17 +3,37 @@ #include "nouveau_drv.h" #include "nouveau_drm.h" +void +nv10_fb_set_region_tiling(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + uint32_t limit = max(1u, addr + size) - 1; + + if (pitch) { + if (dev_priv->card_type >= NV_20) + addr |= 1; + else + addr |= 1 << 31; + } + + nv_wr32(dev, NV10_PFB_TLIMIT(i), limit); + nv_wr32(dev, NV10_PFB_TSIZE(i), pitch); + nv_wr32(dev, NV10_PFB_TILE(i), addr); +} + int nv10_fb_init(struct drm_device *dev) { - uint32_t fb_bar_size; + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_fb_engine *pfb = &dev_priv->engine.fb; int i; - fb_bar_size = drm_get_resource_len(dev, 0) - 1; - for (i = 0; i < NV10_PFB_TILE__SIZE; i++) { - nv_wr32(dev, NV10_PFB_TILE(i), 0); - nv_wr32(dev, NV10_PFB_TLIMIT(i), fb_bar_size); - } + pfb->num_tiles = NV10_PFB_TILE__SIZE; + + /* Turn all the tiling regions off. */ + for (i = 0; i < pfb->num_tiles; i++) + pfb->set_region_tiling(dev, i, 0, 0, 0); return 0; } diff --git a/drivers/gpu/drm/nouveau/nv10_graph.c b/drivers/gpu/drm/nouveau/nv10_graph.c index 6870e0ee2e7e..fcf2cdd19493 100644 --- a/drivers/gpu/drm/nouveau/nv10_graph.c +++ b/drivers/gpu/drm/nouveau/nv10_graph.c @@ -807,6 +807,20 @@ void nv10_graph_destroy_context(struct nouveau_channel *chan) chan->pgraph_ctx = NULL; } +void +nv10_graph_set_region_tiling(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch) +{ + uint32_t limit = max(1u, addr + size) - 1; + + if (pitch) + addr |= 1 << 31; + + nv_wr32(dev, NV10_PGRAPH_TLIMIT(i), limit); + nv_wr32(dev, NV10_PGRAPH_TSIZE(i), pitch); + nv_wr32(dev, NV10_PGRAPH_TILE(i), addr); +} + int nv10_graph_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; @@ -838,17 +852,9 @@ int nv10_graph_init(struct drm_device *dev) } else nv_wr32(dev, NV10_PGRAPH_DEBUG_4, 0x00000000); - /* copy tile info from PFB */ - for (i = 0; i < NV10_PFB_TILE__SIZE; i++) { - nv_wr32(dev, NV10_PGRAPH_TILE(i), - nv_rd32(dev, NV10_PFB_TILE(i))); - nv_wr32(dev, NV10_PGRAPH_TLIMIT(i), - nv_rd32(dev, NV10_PFB_TLIMIT(i))); - nv_wr32(dev, NV10_PGRAPH_TSIZE(i), - nv_rd32(dev, NV10_PFB_TSIZE(i))); - nv_wr32(dev, NV10_PGRAPH_TSTATUS(i), - nv_rd32(dev, NV10_PFB_TSTATUS(i))); - } + /* Turn all the tiling regions off. */ + for (i = 0; i < NV10_PFB_TILE__SIZE; i++) + nv10_graph_set_region_tiling(dev, i, 0, 0, 0); nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH1, 0x00000000); nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH2, 0x00000000); diff --git a/drivers/gpu/drm/nouveau/nv20_graph.c b/drivers/gpu/drm/nouveau/nv20_graph.c index 18ba74f19703..d6fc0a82f03d 100644 --- a/drivers/gpu/drm/nouveau/nv20_graph.c +++ b/drivers/gpu/drm/nouveau/nv20_graph.c @@ -514,6 +514,27 @@ nv20_graph_rdi(struct drm_device *dev) nouveau_wait_for_idle(dev); } +void +nv20_graph_set_region_tiling(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch) +{ + uint32_t limit = max(1u, addr + size) - 1; + + if (pitch) + addr |= 1; + + nv_wr32(dev, NV20_PGRAPH_TLIMIT(i), limit); + nv_wr32(dev, NV20_PGRAPH_TSIZE(i), pitch); + nv_wr32(dev, NV20_PGRAPH_TILE(i), addr); + + nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0030 + 4 * i); + nv_wr32(dev, NV10_PGRAPH_RDI_DATA, limit); + nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0050 + 4 * i); + nv_wr32(dev, NV10_PGRAPH_RDI_DATA, pitch); + nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0010 + 4 * i); + nv_wr32(dev, NV10_PGRAPH_RDI_DATA, addr); +} + int nv20_graph_init(struct drm_device *dev) { @@ -572,27 +593,10 @@ nv20_graph_init(struct drm_device *dev) nv_wr32(dev, NV10_PGRAPH_RDI_DATA , 0x00000030); } - /* copy tile info from PFB */ - for (i = 0; i < NV10_PFB_TILE__SIZE; i++) { - nv_wr32(dev, 0x00400904 + i * 0x10, - nv_rd32(dev, NV10_PFB_TLIMIT(i))); - /* which is NV40_PGRAPH_TLIMIT0(i) ?? */ - nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0030 + i * 4); - nv_wr32(dev, NV10_PGRAPH_RDI_DATA, - nv_rd32(dev, NV10_PFB_TLIMIT(i))); - nv_wr32(dev, 0x00400908 + i * 0x10, - nv_rd32(dev, NV10_PFB_TSIZE(i))); - /* which is NV40_PGRAPH_TSIZE0(i) ?? */ - nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0050 + i * 4); - nv_wr32(dev, NV10_PGRAPH_RDI_DATA, - nv_rd32(dev, NV10_PFB_TSIZE(i))); - nv_wr32(dev, 0x00400900 + i * 0x10, - nv_rd32(dev, NV10_PFB_TILE(i))); - /* which is NV40_PGRAPH_TILE0(i) ?? */ - nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0010 + i * 4); - nv_wr32(dev, NV10_PGRAPH_RDI_DATA, - nv_rd32(dev, NV10_PFB_TILE(i))); - } + /* Turn all the tiling regions off. */ + for (i = 0; i < NV10_PFB_TILE__SIZE; i++) + nv20_graph_set_region_tiling(dev, i, 0, 0, 0); + for (i = 0; i < 8; i++) { nv_wr32(dev, 0x400980 + i * 4, nv_rd32(dev, 0x100300 + i * 4)); nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0090 + i * 4); @@ -704,18 +708,9 @@ nv30_graph_init(struct drm_device *dev) nv_wr32(dev, 0x4000c0, 0x00000016); - /* copy tile info from PFB */ - for (i = 0; i < NV10_PFB_TILE__SIZE; i++) { - nv_wr32(dev, 0x00400904 + i * 0x10, - nv_rd32(dev, NV10_PFB_TLIMIT(i))); - /* which is NV40_PGRAPH_TLIMIT0(i) ?? */ - nv_wr32(dev, 0x00400908 + i * 0x10, - nv_rd32(dev, NV10_PFB_TSIZE(i))); - /* which is NV40_PGRAPH_TSIZE0(i) ?? */ - nv_wr32(dev, 0x00400900 + i * 0x10, - nv_rd32(dev, NV10_PFB_TILE(i))); - /* which is NV40_PGRAPH_TILE0(i) ?? */ - } + /* Turn all the tiling regions off. */ + for (i = 0; i < NV10_PFB_TILE__SIZE; i++) + nv20_graph_set_region_tiling(dev, i, 0, 0, 0); nv_wr32(dev, NV10_PGRAPH_CTX_CONTROL, 0x10000100); nv_wr32(dev, NV10_PGRAPH_STATE , 0xFFFFFFFF); diff --git a/drivers/gpu/drm/nouveau/nv40_fb.c b/drivers/gpu/drm/nouveau/nv40_fb.c index ca1d27107a8e..3cd07d8d5bd7 100644 --- a/drivers/gpu/drm/nouveau/nv40_fb.c +++ b/drivers/gpu/drm/nouveau/nv40_fb.c @@ -3,12 +3,37 @@ #include "nouveau_drv.h" #include "nouveau_drm.h" +void +nv40_fb_set_region_tiling(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + uint32_t limit = max(1u, addr + size) - 1; + + if (pitch) + addr |= 1; + + switch (dev_priv->chipset) { + case 0x40: + nv_wr32(dev, NV10_PFB_TLIMIT(i), limit); + nv_wr32(dev, NV10_PFB_TSIZE(i), pitch); + nv_wr32(dev, NV10_PFB_TILE(i), addr); + break; + + default: + nv_wr32(dev, NV40_PFB_TLIMIT(i), limit); + nv_wr32(dev, NV40_PFB_TSIZE(i), pitch); + nv_wr32(dev, NV40_PFB_TILE(i), addr); + break; + } +} + int nv40_fb_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; - uint32_t fb_bar_size, tmp; - int num_tiles; + struct nouveau_fb_engine *pfb = &dev_priv->engine.fb; + uint32_t tmp; int i; /* This is strictly a NV4x register (don't know about NV5x). */ @@ -23,35 +48,23 @@ nv40_fb_init(struct drm_device *dev) case 0x45: tmp = nv_rd32(dev, NV10_PFB_CLOSE_PAGE2); nv_wr32(dev, NV10_PFB_CLOSE_PAGE2, tmp & ~(1 << 15)); - num_tiles = NV10_PFB_TILE__SIZE; + pfb->num_tiles = NV10_PFB_TILE__SIZE; break; case 0x46: /* G72 */ case 0x47: /* G70 */ case 0x49: /* G71 */ case 0x4b: /* G73 */ case 0x4c: /* C51 (G7X version) */ - num_tiles = NV40_PFB_TILE__SIZE_1; + pfb->num_tiles = NV40_PFB_TILE__SIZE_1; break; default: - num_tiles = NV40_PFB_TILE__SIZE_0; + pfb->num_tiles = NV40_PFB_TILE__SIZE_0; break; } - fb_bar_size = drm_get_resource_len(dev, 0) - 1; - switch (dev_priv->chipset) { - case 0x40: - for (i = 0; i < num_tiles; i++) { - nv_wr32(dev, NV10_PFB_TILE(i), 0); - nv_wr32(dev, NV10_PFB_TLIMIT(i), fb_bar_size); - } - break; - default: - for (i = 0; i < num_tiles; i++) { - nv_wr32(dev, NV40_PFB_TILE(i), 0); - nv_wr32(dev, NV40_PFB_TLIMIT(i), fb_bar_size); - } - break; - } + /* Turn all the tiling regions off. */ + for (i = 0; i < pfb->num_tiles; i++) + pfb->set_region_tiling(dev, i, 0, 0, 0); return 0; } diff --git a/drivers/gpu/drm/nouveau/nv40_graph.c b/drivers/gpu/drm/nouveau/nv40_graph.c index 2b332bb55acf..53e8afe1dcd1 100644 --- a/drivers/gpu/drm/nouveau/nv40_graph.c +++ b/drivers/gpu/drm/nouveau/nv40_graph.c @@ -181,6 +181,48 @@ nv40_graph_unload_context(struct drm_device *dev) return ret; } +void +nv40_graph_set_region_tiling(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + uint32_t limit = max(1u, addr + size) - 1; + + if (pitch) + addr |= 1; + + switch (dev_priv->chipset) { + case 0x44: + case 0x4a: + case 0x4e: + nv_wr32(dev, NV20_PGRAPH_TSIZE(i), pitch); + nv_wr32(dev, NV20_PGRAPH_TLIMIT(i), limit); + nv_wr32(dev, NV20_PGRAPH_TILE(i), addr); + break; + + case 0x46: + case 0x47: + case 0x49: + case 0x4b: + nv_wr32(dev, NV47_PGRAPH_TSIZE(i), pitch); + nv_wr32(dev, NV47_PGRAPH_TLIMIT(i), limit); + nv_wr32(dev, NV47_PGRAPH_TILE(i), addr); + nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), pitch); + nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), limit); + nv_wr32(dev, NV40_PGRAPH_TILE1(i), addr); + break; + + default: + nv_wr32(dev, NV20_PGRAPH_TSIZE(i), pitch); + nv_wr32(dev, NV20_PGRAPH_TLIMIT(i), limit); + nv_wr32(dev, NV20_PGRAPH_TILE(i), addr); + nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), pitch); + nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), limit); + nv_wr32(dev, NV40_PGRAPH_TILE1(i), addr); + break; + } +} + /* * G70 0x47 * G71 0x49 @@ -195,7 +237,8 @@ nv40_graph_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = (struct drm_nouveau_private *)dev->dev_private; - uint32_t vramsz, tmp; + struct nouveau_fb_engine *pfb = &dev_priv->engine.fb; + uint32_t vramsz; int i, j; nv_wr32(dev, NV03_PMC_ENABLE, nv_rd32(dev, NV03_PMC_ENABLE) & @@ -292,74 +335,9 @@ nv40_graph_init(struct drm_device *dev) nv_wr32(dev, 0x400b38, 0x2ffff800); nv_wr32(dev, 0x400b3c, 0x00006000); - /* copy tile info from PFB */ - switch (dev_priv->chipset) { - case 0x40: /* vanilla NV40 */ - for (i = 0; i < NV10_PFB_TILE__SIZE; i++) { - tmp = nv_rd32(dev, NV10_PFB_TILE(i)); - nv_wr32(dev, NV40_PGRAPH_TILE0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TILE1(i), tmp); - tmp = nv_rd32(dev, NV10_PFB_TLIMIT(i)); - nv_wr32(dev, NV40_PGRAPH_TLIMIT0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), tmp); - tmp = nv_rd32(dev, NV10_PFB_TSIZE(i)); - nv_wr32(dev, NV40_PGRAPH_TSIZE0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), tmp); - tmp = nv_rd32(dev, NV10_PFB_TSTATUS(i)); - nv_wr32(dev, NV40_PGRAPH_TSTATUS0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TSTATUS1(i), tmp); - } - break; - case 0x44: - case 0x4a: - case 0x4e: /* NV44-based cores don't have 0x406900? */ - for (i = 0; i < NV40_PFB_TILE__SIZE_0; i++) { - tmp = nv_rd32(dev, NV40_PFB_TILE(i)); - nv_wr32(dev, NV40_PGRAPH_TILE0(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TLIMIT(i)); - nv_wr32(dev, NV40_PGRAPH_TLIMIT0(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TSIZE(i)); - nv_wr32(dev, NV40_PGRAPH_TSIZE0(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TSTATUS(i)); - nv_wr32(dev, NV40_PGRAPH_TSTATUS0(i), tmp); - } - break; - case 0x46: - case 0x47: - case 0x49: - case 0x4b: /* G7X-based cores */ - for (i = 0; i < NV40_PFB_TILE__SIZE_1; i++) { - tmp = nv_rd32(dev, NV40_PFB_TILE(i)); - nv_wr32(dev, NV47_PGRAPH_TILE0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TILE1(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TLIMIT(i)); - nv_wr32(dev, NV47_PGRAPH_TLIMIT0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TSIZE(i)); - nv_wr32(dev, NV47_PGRAPH_TSIZE0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TSTATUS(i)); - nv_wr32(dev, NV47_PGRAPH_TSTATUS0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TSTATUS1(i), tmp); - } - break; - default: /* everything else */ - for (i = 0; i < NV40_PFB_TILE__SIZE_0; i++) { - tmp = nv_rd32(dev, NV40_PFB_TILE(i)); - nv_wr32(dev, NV40_PGRAPH_TILE0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TILE1(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TLIMIT(i)); - nv_wr32(dev, NV40_PGRAPH_TLIMIT0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TSIZE(i)); - nv_wr32(dev, NV40_PGRAPH_TSIZE0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TSTATUS(i)); - nv_wr32(dev, NV40_PGRAPH_TSTATUS0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TSTATUS1(i), tmp); - } - break; - } + /* Turn all the tiling regions off. */ + for (i = 0; i < pfb->num_tiles; i++) + nv40_graph_set_region_tiling(dev, i, 0, 0, 0); /* begin RAM config */ vramsz = drm_get_resource_len(dev, 0) - 1; From a0af9add499cf29a16707b7b148842992077f4cb Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Fri, 11 Dec 2009 16:51:09 +0100 Subject: [PATCH 0587/1626] drm/nouveau: Make the MM aware of pre-G80 tiling. This commit has also the following 3 bugfix commits squashed into it from the nouveau git tree: drm/nouveau: Fix up the tiling alignment restrictions for nv1x. drm/nouveau: Fix up the nv2x tiling alignment restrictions. drm/nv50: fix align typo for g9x Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_bo.c | 223 ++++++++++++++++++-------- drivers/gpu/drm/nouveau/nouveau_drv.h | 22 +++ drivers/gpu/drm/nouveau/nouveau_mem.c | 87 ++++++++++ 3 files changed, 266 insertions(+), 66 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 0cad6d834eb2..1d6036fabd5d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -37,6 +37,7 @@ static void nouveau_bo_del_ttm(struct ttm_buffer_object *bo) { struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev); + struct drm_device *dev = dev_priv->dev; struct nouveau_bo *nvbo = nouveau_bo(bo); ttm_bo_kunmap(&nvbo->kmap); @@ -44,12 +45,83 @@ nouveau_bo_del_ttm(struct ttm_buffer_object *bo) if (unlikely(nvbo->gem)) DRM_ERROR("bo %p still attached to GEM object\n", bo); + if (nvbo->tile) + nv10_mem_expire_tiling(dev, nvbo->tile, NULL); + spin_lock(&dev_priv->ttm.bo_list_lock); list_del(&nvbo->head); spin_unlock(&dev_priv->ttm.bo_list_lock); kfree(nvbo); } +static void +nouveau_bo_fixup_align(struct drm_device *dev, + uint32_t tile_mode, uint32_t tile_flags, + int *align, int *size) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + + /* + * Some of the tile_flags have a periodic structure of N*4096 bytes, + * align to to that as well as the page size. Overallocate memory to + * avoid corruption of other buffer objects. + */ + if (dev_priv->card_type == NV_50) { + switch (tile_flags) { + case 0x1800: + case 0x2800: + case 0x4800: + case 0x7a00: + if (dev_priv->chipset >= 0xA0) { + /* This is based on high end cards with 448 bits + * memory bus, could be different elsewhere.*/ + *size += 6 * 28672; + /* 8 * 28672 is the actual alignment requirement + * but we must also align to page size. */ + *align = 2 * 8 * 28672; + } else if (dev_priv->chipset >= 0x90) { + *size += 3 * 16384; + *align = 12 * 16384; + } else { + *size += 3 * 8192; + /* 12 * 8192 is the actual alignment requirement + * but we must also align to page size. */ + *align = 2 * 12 * 8192; + } + break; + default: + break; + } + + } else { + if (tile_mode) { + if (dev_priv->chipset >= 0x40) { + *align = 65536; + *size = roundup(*size, 64 * tile_mode); + + } else if (dev_priv->chipset >= 0x30) { + *align = 32768; + *size = roundup(*size, 64 * tile_mode); + + } else if (dev_priv->chipset >= 0x20) { + *align = 16384; + *size = roundup(*size, 64 * tile_mode); + + } else if (dev_priv->chipset >= 0x10) { + *align = 16384; + *size = roundup(*size, 32 * tile_mode); + } + } + } + + *size = ALIGN(*size, PAGE_SIZE); + + if (dev_priv->card_type == NV_50) { + *size = ALIGN(*size, 65536); + *align = max(65536, *align); + } +} + int nouveau_bo_new(struct drm_device *dev, struct nouveau_channel *chan, int size, int align, uint32_t flags, uint32_t tile_mode, @@ -70,46 +142,9 @@ nouveau_bo_new(struct drm_device *dev, struct nouveau_channel *chan, nvbo->tile_mode = tile_mode; nvbo->tile_flags = tile_flags; - /* - * Some of the tile_flags have a periodic structure of N*4096 bytes, - * align to to that as well as the page size. Overallocate memory to - * avoid corruption of other buffer objects. - */ - switch (tile_flags) { - case 0x1800: - case 0x2800: - case 0x4800: - case 0x7a00: - if (dev_priv->chipset >= 0xA0) { - /* This is based on high end cards with 448 bits - * memory bus, could be different elsewhere.*/ - size += 6 * 28672; - /* 8 * 28672 is the actual alignment requirement, - * but we must also align to page size. */ - align = 2 * 8 * 28672; - } else if (dev_priv->chipset >= 0x90) { - size += 3 * 16384; - align = 12 * 16834; - } else { - size += 3 * 8192; - /* 12 * 8192 is the actual alignment requirement, - * but we must also align to page size. */ - align = 2 * 12 * 8192; - } - break; - default: - break; - } - + nouveau_bo_fixup_align(dev, tile_mode, tile_flags, &align, &size); align >>= PAGE_SHIFT; - size = (size + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); - if (dev_priv->card_type == NV_50) { - size = (size + 65535) & ~65535; - if (align < (65536 / PAGE_SIZE)) - align = (65536 / PAGE_SIZE); - } - if (flags & TTM_PL_FLAG_VRAM) nvbo->placements[n++] = TTM_PL_FLAG_VRAM | TTM_PL_MASK_CACHING; if (flags & TTM_PL_FLAG_TT) @@ -421,6 +456,7 @@ nouveau_bo_evict_flags(struct ttm_buffer_object *bo, struct ttm_placement *pl) /* GPU-assisted copy using NV_MEMORY_TO_MEMORY_FORMAT, can access * TTM_PL_{VRAM,TT} directly. */ + static int nouveau_bo_move_accel_cleanup(struct nouveau_channel *chan, struct nouveau_bo *nvbo, bool evict, bool no_wait, @@ -455,11 +491,12 @@ nouveau_bo_mem_ctxdma(struct nouveau_bo *nvbo, struct nouveau_channel *chan, } static int -nouveau_bo_move_m2mf(struct ttm_buffer_object *bo, int evict, int no_wait, - struct ttm_mem_reg *old_mem, struct ttm_mem_reg *new_mem) +nouveau_bo_move_m2mf(struct ttm_buffer_object *bo, int evict, bool intr, + int no_wait, struct ttm_mem_reg *new_mem) { struct nouveau_bo *nvbo = nouveau_bo(bo); struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev); + struct ttm_mem_reg *old_mem = &bo->mem; struct nouveau_channel *chan; uint64_t src_offset, dst_offset; uint32_t page_count; @@ -559,7 +596,7 @@ nouveau_bo_move_flipd(struct ttm_buffer_object *bo, bool evict, bool intr, if (ret) goto out; - ret = nouveau_bo_move_m2mf(bo, true, no_wait, &bo->mem, &tmp_mem); + ret = nouveau_bo_move_m2mf(bo, true, intr, no_wait, &tmp_mem); if (ret) goto out; @@ -597,7 +634,7 @@ nouveau_bo_move_flips(struct ttm_buffer_object *bo, bool evict, bool intr, if (ret) goto out; - ret = nouveau_bo_move_m2mf(bo, true, no_wait, &bo->mem, new_mem); + ret = nouveau_bo_move_m2mf(bo, true, intr, no_wait, new_mem); if (ret) goto out; @@ -612,52 +649,106 @@ out: } static int -nouveau_bo_move(struct ttm_buffer_object *bo, bool evict, bool intr, - bool no_wait, struct ttm_mem_reg *new_mem) +nouveau_bo_vm_bind(struct ttm_buffer_object *bo, struct ttm_mem_reg *new_mem, + struct nouveau_tile_reg **new_tile) { struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev); - struct nouveau_bo *nvbo = nouveau_bo(bo); struct drm_device *dev = dev_priv->dev; - struct ttm_mem_reg *old_mem = &bo->mem; + struct nouveau_bo *nvbo = nouveau_bo(bo); + uint64_t offset; int ret; - if (dev_priv->card_type == NV_50 && new_mem->mem_type == TTM_PL_VRAM && - !nvbo->no_vm) { - uint64_t offset = new_mem->mm_node->start << PAGE_SHIFT; + if (nvbo->no_vm || new_mem->mem_type != TTM_PL_VRAM) { + /* Nothing to do. */ + *new_tile = NULL; + return 0; + } + offset = new_mem->mm_node->start << PAGE_SHIFT; + + if (dev_priv->card_type == NV_50) { ret = nv50_mem_vm_bind_linear(dev, offset + dev_priv->vm_vram_base, new_mem->size, nvbo->tile_flags, offset); if (ret) return ret; + + } else if (dev_priv->card_type >= NV_10) { + *new_tile = nv10_mem_set_tiling(dev, offset, new_mem->size, + nvbo->tile_mode); } - if (dev_priv->init_state != NOUVEAU_CARD_INIT_DONE || - !dev_priv->channel) - return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); + return 0; +} +static void +nouveau_bo_vm_cleanup(struct ttm_buffer_object *bo, + struct nouveau_tile_reg *new_tile, + struct nouveau_tile_reg **old_tile) +{ + struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev); + struct drm_device *dev = dev_priv->dev; + + if (dev_priv->card_type >= NV_10 && + dev_priv->card_type < NV_50) { + if (*old_tile) + nv10_mem_expire_tiling(dev, *old_tile, bo->sync_obj); + + *old_tile = new_tile; + } +} + +static int +nouveau_bo_move(struct ttm_buffer_object *bo, bool evict, bool intr, + bool no_wait, struct ttm_mem_reg *new_mem) +{ + struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev); + struct nouveau_bo *nvbo = nouveau_bo(bo); + struct ttm_mem_reg *old_mem = &bo->mem; + struct nouveau_tile_reg *new_tile = NULL; + int ret = 0; + + ret = nouveau_bo_vm_bind(bo, new_mem, &new_tile); + if (ret) + return ret; + + /* Software copy if the card isn't up and running yet. */ + if (dev_priv->init_state != NOUVEAU_CARD_INIT_DONE || + !dev_priv->channel) { + ret = ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); + goto out; + } + + /* Fake bo copy. */ if (old_mem->mem_type == TTM_PL_SYSTEM && !bo->ttm) { BUG_ON(bo->mem.mm_node != NULL); bo->mem = *new_mem; new_mem->mm_node = NULL; - return 0; + goto out; } - if (new_mem->mem_type == TTM_PL_SYSTEM) { - if (old_mem->mem_type == TTM_PL_SYSTEM) - return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); - if (nouveau_bo_move_flipd(bo, evict, intr, no_wait, new_mem)) - return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); - } else if (old_mem->mem_type == TTM_PL_SYSTEM) { - if (nouveau_bo_move_flips(bo, evict, intr, no_wait, new_mem)) - return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); - } else { - if (nouveau_bo_move_m2mf(bo, evict, no_wait, old_mem, new_mem)) - return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); - } + /* Hardware assisted copy. */ + if (new_mem->mem_type == TTM_PL_SYSTEM) + ret = nouveau_bo_move_flipd(bo, evict, intr, no_wait, new_mem); + else if (old_mem->mem_type == TTM_PL_SYSTEM) + ret = nouveau_bo_move_flips(bo, evict, intr, no_wait, new_mem); + else + ret = nouveau_bo_move_m2mf(bo, evict, intr, no_wait, new_mem); - return 0; + if (!ret) + goto out; + + /* Fallback to software copy. */ + ret = ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); + +out: + if (ret) + nouveau_bo_vm_cleanup(bo, NULL, &new_tile); + else + nouveau_bo_vm_cleanup(bo, new_tile, &nvbo->tile); + + return ret; } static int diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 446a92ad2eef..9c9815bf505a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -59,11 +59,19 @@ struct nouveau_grctx; #define MAX_NUM_DCB_ENTRIES 16 #define NOUVEAU_MAX_CHANNEL_NR 128 +#define NOUVEAU_MAX_TILE_NR 15 #define NV50_VM_MAX_VRAM (2*1024*1024*1024ULL) #define NV50_VM_BLOCK (512*1024*1024ULL) #define NV50_VM_VRAM_NR (NV50_VM_MAX_VRAM / NV50_VM_BLOCK) +struct nouveau_tile_reg { + struct nouveau_fence *fence; + uint32_t addr; + uint32_t size; + bool used; +}; + struct nouveau_bo { struct ttm_buffer_object bo; struct ttm_placement placement; @@ -83,6 +91,7 @@ struct nouveau_bo { uint32_t tile_mode; uint32_t tile_flags; + struct nouveau_tile_reg *tile; struct drm_gem_object *gem; struct drm_file *cpu_filp; @@ -558,6 +567,12 @@ struct drm_nouveau_private { unsigned long sg_handle; } gart_info; + /* nv10-nv40 tiling regions */ + struct { + struct nouveau_tile_reg reg[NOUVEAU_MAX_TILE_NR]; + spinlock_t lock; + } tile; + /* G8x/G9x virtual address space */ uint64_t vm_gart_base; uint64_t vm_gart_size; @@ -695,6 +710,13 @@ extern void nouveau_mem_release(struct drm_file *, struct mem_block *heap); extern int nouveau_mem_init(struct drm_device *); extern int nouveau_mem_init_agp(struct drm_device *); extern void nouveau_mem_close(struct drm_device *); +extern struct nouveau_tile_reg *nv10_mem_set_tiling(struct drm_device *dev, + uint32_t addr, + uint32_t size, + uint32_t pitch); +extern void nv10_mem_expire_tiling(struct drm_device *dev, + struct nouveau_tile_reg *tile, + struct nouveau_fence *fence); extern int nv50_mem_vm_bind_linear(struct drm_device *, uint64_t virt, uint32_t size, uint32_t flags, uint64_t phys); diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c index 5158a12f7844..fb9bdd6edf1f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mem.c +++ b/drivers/gpu/drm/nouveau/nouveau_mem.c @@ -191,6 +191,92 @@ void nouveau_mem_release(struct drm_file *file_priv, struct mem_block *heap) } } +/* + * NV10-NV40 tiling helpers + */ + +static void +nv10_mem_set_region_tiling(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_fifo_engine *pfifo = &dev_priv->engine.fifo; + struct nouveau_fb_engine *pfb = &dev_priv->engine.fb; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + struct nouveau_tile_reg *tile = &dev_priv->tile.reg[i]; + + tile->addr = addr; + tile->size = size; + tile->used = !!pitch; + nouveau_fence_unref((void **)&tile->fence); + + if (!pfifo->cache_flush(dev)) + return; + + pfifo->reassign(dev, false); + pfifo->cache_flush(dev); + pfifo->cache_pull(dev, false); + + nouveau_wait_for_idle(dev); + + pgraph->set_region_tiling(dev, i, addr, size, pitch); + pfb->set_region_tiling(dev, i, addr, size, pitch); + + pfifo->cache_pull(dev, true); + pfifo->reassign(dev, true); +} + +struct nouveau_tile_reg * +nv10_mem_set_tiling(struct drm_device *dev, uint32_t addr, uint32_t size, + uint32_t pitch) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_fb_engine *pfb = &dev_priv->engine.fb; + struct nouveau_tile_reg *tile = dev_priv->tile.reg, *found = NULL; + int i; + + spin_lock(&dev_priv->tile.lock); + + for (i = 0; i < pfb->num_tiles; i++) { + if (tile[i].used) + /* Tile region in use. */ + continue; + + if (tile[i].fence && + !nouveau_fence_signalled(tile[i].fence, NULL)) + /* Pending tile region. */ + continue; + + if (max(tile[i].addr, addr) < + min(tile[i].addr + tile[i].size, addr + size)) + /* Kill an intersecting tile region. */ + nv10_mem_set_region_tiling(dev, i, 0, 0, 0); + + if (pitch && !found) { + /* Free tile region. */ + nv10_mem_set_region_tiling(dev, i, addr, size, pitch); + found = &tile[i]; + } + } + + spin_unlock(&dev_priv->tile.lock); + + return found; +} + +void +nv10_mem_expire_tiling(struct drm_device *dev, struct nouveau_tile_reg *tile, + struct nouveau_fence *fence) +{ + if (fence) { + /* Mark it as pending. */ + tile->fence = fence; + nouveau_fence_ref(fence); + } + + tile->used = false; +} + /* * NV50 VM helpers */ @@ -513,6 +599,7 @@ nouveau_mem_init(struct drm_device *dev) INIT_LIST_HEAD(&dev_priv->ttm.bo_list); spin_lock_init(&dev_priv->ttm.bo_list_lock); + spin_lock_init(&dev_priv->tile.lock); dev_priv->fb_available_size = nouveau_mem_fb_amount(dev); From cea7789f2a680893e812776dd7202dd50475f9d2 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Wed, 16 Dec 2009 12:27:11 +0100 Subject: [PATCH 0588/1626] drm/i2c/ch7006: Drop build time dependency to nouveau. This partially reverts e4b41066, as this driver is intended to be useful with any KMS driver for suitable hardware. The missing build dependency that commit workarounded was DRM_KMS_HELPER. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/Kconfig | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/Kconfig b/drivers/gpu/drm/nouveau/Kconfig index b1bc1ea182b8..1175429da102 100644 --- a/drivers/gpu/drm/nouveau/Kconfig +++ b/drivers/gpu/drm/nouveau/Kconfig @@ -30,12 +30,11 @@ config DRM_NOUVEAU_DEBUG via debugfs. menu "I2C encoder or helper chips" - depends on DRM && I2C + depends on DRM && DRM_KMS_HELPER && I2C config DRM_I2C_CH7006 tristate "Chrontel ch7006 TV encoder" - depends on DRM_NOUVEAU - default m + default m if DRM_NOUVEAU help Support for Chrontel ch7006 and similar TV encoders, found on some nVidia video cards. From 77e2b5ed83864f0a58e2cd046b15aab6865babfb Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Wed, 16 Dec 2009 19:05:00 +0100 Subject: [PATCH 0589/1626] drm/nouveau: Fix "general protection fault" in the flipd/flips eviction path. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_bo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 1d6036fabd5d..365fc6508173 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -584,7 +584,7 @@ nouveau_bo_move_flipd(struct ttm_buffer_object *bo, bool evict, bool intr, placement.fpfn = placement.lpfn = 0; placement.num_placement = placement.num_busy_placement = 1; - placement.placement = &placement_memtype; + placement.placement = placement.busy_placement = &placement_memtype; tmp_mem = *new_mem; tmp_mem.mm_node = NULL; @@ -622,7 +622,7 @@ nouveau_bo_move_flips(struct ttm_buffer_object *bo, bool evict, bool intr, placement.fpfn = placement.lpfn = 0; placement.num_placement = placement.num_busy_placement = 1; - placement.placement = &placement_memtype; + placement.placement = placement.busy_placement = &placement_memtype; tmp_mem = *new_mem; tmp_mem.mm_node = NULL; From 27f691a69d411b9b2093163cdd27780f9c927422 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Wed, 16 Dec 2009 19:05:38 +0100 Subject: [PATCH 0590/1626] drm/nouveau: No need to force evict=true when swapping evicted BOs back in. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_bo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 365fc6508173..73af53fe75a0 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -634,7 +634,7 @@ nouveau_bo_move_flips(struct ttm_buffer_object *bo, bool evict, bool intr, if (ret) goto out; - ret = nouveau_bo_move_m2mf(bo, true, intr, no_wait, new_mem); + ret = nouveau_bo_move_m2mf(bo, evict, intr, no_wait, new_mem); if (ret) goto out; From 8dea4a1935fabbc5fcea6016d6670e6bc06de198 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Wed, 16 Dec 2009 19:03:28 +0100 Subject: [PATCH 0591/1626] drm/nouveau: Drop redundant placement initialization. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_bo.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 73af53fe75a0..5fd462f49407 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -130,7 +130,7 @@ nouveau_bo_new(struct drm_device *dev, struct nouveau_channel *chan, { struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_bo *nvbo; - int ret, n = 0; + int ret = 0; nvbo = kzalloc(sizeof(struct nouveau_bo), GFP_KERNEL); if (!nvbo) @@ -145,19 +145,11 @@ nouveau_bo_new(struct drm_device *dev, struct nouveau_channel *chan, nouveau_bo_fixup_align(dev, tile_mode, tile_flags, &align, &size); align >>= PAGE_SHIFT; - if (flags & TTM_PL_FLAG_VRAM) - nvbo->placements[n++] = TTM_PL_FLAG_VRAM | TTM_PL_MASK_CACHING; - if (flags & TTM_PL_FLAG_TT) - nvbo->placements[n++] = TTM_PL_FLAG_TT | TTM_PL_MASK_CACHING; nvbo->placement.fpfn = 0; nvbo->placement.lpfn = mappable ? dev_priv->fb_mappable_pages : 0; - nvbo->placement.placement = nvbo->placements; - nvbo->placement.busy_placement = nvbo->placements; - nvbo->placement.num_placement = n; - nvbo->placement.num_busy_placement = n; + nouveau_bo_placement_set(nvbo, flags); nvbo->channel = chan; - nouveau_bo_placement_set(nvbo, flags); ret = ttm_bo_init(&dev_priv->ttm.bdev, &nvbo->bo, size, ttm_bo_type_device, &nvbo->placement, align, 0, false, NULL, size, nouveau_bo_del_ttm); From 75c722d7ea70b791d179ec900e7c88bd6d5fd71e Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 21 Dec 2009 12:16:52 +1000 Subject: [PATCH 0592/1626] drm/nv50: ignore vbios table's claim to the contrary if EDID says >8bpc Should fix dim panel issues reported on Dell M6400/M6500. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_display.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index a9263d92a231..90f0bf59fbcd 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -690,9 +690,21 @@ nv50_display_script_select(struct drm_device *dev, struct dcb_entry *dcbent, int pxclk) { struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_connector *nv_connector = NULL; + struct drm_encoder *encoder; struct nvbios *bios = &dev_priv->VBIOS; uint32_t mc, script = 0, or; + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); + + if (nv_encoder->dcb != dcbent) + continue; + + nv_connector = nouveau_encoder_connector_get(nv_encoder); + break; + } + or = ffs(dcbent->or) - 1; mc = nv50_display_mode_ctrl(dev, dcbent->type != OUTPUT_ANALOG, or); switch (dcbent->type) { @@ -711,6 +723,11 @@ nv50_display_script_select(struct drm_device *dev, struct dcb_entry *dcbent, } else if (bios->fp.strapless_is_24bit & 1) script |= 0x0200; + + if (nv_connector && nv_connector->edid && + (nv_connector->edid->revision >= 4) && + (nv_connector->edid->input & 0x70) >= 0x20) + script |= 0x0200; } if (nouveau_uscript_lvds >= 0) { From 3033f14d6538e0e7c3c53d3ed1ff6cec28260b98 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 21 Dec 2009 23:00:41 +0100 Subject: [PATCH 0593/1626] drm/nv50: fix fillrect color struct fb_fillrect->color is not a color, but index into pseudo_palette array Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_fbcon.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv50_fbcon.c b/drivers/gpu/drm/nouveau/nv50_fbcon.c index 6bcc6d39e9b0..c966ef834853 100644 --- a/drivers/gpu/drm/nouveau/nv50_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv50_fbcon.c @@ -10,6 +10,7 @@ nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) struct drm_device *dev = par->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_channel *chan = dev_priv->channel; + uint32_t color = ((uint32_t *) info->pseudo_palette)[rect->color]; if (info->state != FBINFO_STATE_RUNNING) return; @@ -31,7 +32,7 @@ nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) OUT_RING(chan, 1); } BEGIN_RING(chan, NvSub2D, 0x0588, 1); - OUT_RING(chan, rect->color); + OUT_RING(chan, color); BEGIN_RING(chan, NvSub2D, 0x0600, 4); OUT_RING(chan, rect->dx); OUT_RING(chan, rect->dy); From 11d6eb2af53395b25e1d6b8b79bb9a999c3e4c4d Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Thu, 17 Dec 2009 18:52:44 +0100 Subject: [PATCH 0594/1626] drm/nouveau: Clean up the nv17-nv4x load detection code a bit. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_drv.h | 6 +---- drivers/gpu/drm/nouveau/nv04_dac.c | 37 +++++++++++++++------------ drivers/gpu/drm/nouveau/nv17_tv.c | 27 +++++++++++-------- 3 files changed, 38 insertions(+), 32 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 9c9815bf505a..7da88a92c83f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -1074,8 +1074,7 @@ extern long nouveau_compat_ioctl(struct file *file, unsigned int cmd, /* nv04_dac.c */ extern int nv04_dac_create(struct drm_device *dev, struct dcb_entry *entry); -extern enum drm_connector_status nv17_dac_detect(struct drm_encoder *encoder, - struct drm_connector *connector); +extern uint32_t nv17_dac_sample_load(struct drm_encoder *encoder); extern int nv04_dac_output_offset(struct drm_encoder *encoder); extern void nv04_dac_update_dacclk(struct drm_encoder *encoder, bool enable); @@ -1093,9 +1092,6 @@ extern int nv04_tv_create(struct drm_device *dev, struct dcb_entry *entry); /* nv17_tv.c */ extern int nv17_tv_create(struct drm_device *dev, struct dcb_entry *entry); -extern enum drm_connector_status nv17_tv_detect(struct drm_encoder *encoder, - struct drm_connector *connector, - uint32_t pin_mask); /* nv04_display.c */ extern int nv04_display_create(struct drm_device *); diff --git a/drivers/gpu/drm/nouveau/nv04_dac.c b/drivers/gpu/drm/nouveau/nv04_dac.c index d9f32879ba38..d0e038d28948 100644 --- a/drivers/gpu/drm/nouveau/nv04_dac.c +++ b/drivers/gpu/drm/nouveau/nv04_dac.c @@ -212,16 +212,15 @@ out: return connector_status_disconnected; } -enum drm_connector_status nv17_dac_detect(struct drm_encoder *encoder, - struct drm_connector *connector) +uint32_t nv17_dac_sample_load(struct drm_encoder *encoder) { struct drm_device *dev = encoder->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb; - uint32_t testval, regoffset = nv04_dac_output_offset(encoder); + uint32_t sample, testval, regoffset = nv04_dac_output_offset(encoder); uint32_t saved_powerctrl_2 = 0, saved_powerctrl_4 = 0, saved_routput, saved_rtest_ctrl, saved_gpio0, saved_gpio1, temp, routput; - int head, present = 0; + int head; #define RGB_TEST_DATA(r, g, b) (r << 0 | g << 10 | b << 20) if (dcb->type == OUTPUT_TV) { @@ -287,13 +286,7 @@ enum drm_connector_status nv17_dac_detect(struct drm_encoder *encoder, temp | NV_PRAMDAC_TEST_CONTROL_TP_INS_EN_ASSERTED); msleep(5); - temp = NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset); - - if (dcb->type == OUTPUT_TV) - present = (nv17_tv_detect(encoder, connector, temp) - == connector_status_connected); - else - present = temp & NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI; + sample = NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset); temp = NVReadRAMDAC(dev, head, NV_PRAMDAC_TEST_CONTROL); NVWriteRAMDAC(dev, head, NV_PRAMDAC_TEST_CONTROL, @@ -310,14 +303,24 @@ enum drm_connector_status nv17_dac_detect(struct drm_encoder *encoder, nv17_gpio_set(dev, DCB_GPIO_TVDAC1, saved_gpio1); nv17_gpio_set(dev, DCB_GPIO_TVDAC0, saved_gpio0); - if (present) { - NV_INFO(dev, "Load detected on output %c\n", '@' + ffs(dcb->or)); - return connector_status_connected; - } - - return connector_status_disconnected; + return sample; } +static enum drm_connector_status +nv17_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) +{ + struct drm_device *dev = encoder->dev; + struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb; + uint32_t sample = nv17_dac_sample_load(encoder); + + if (sample & NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI) { + NV_INFO(dev, "Load detected on output %c\n", + '@' + ffs(dcb->or)); + return connector_status_connected; + } else { + return connector_status_disconnected; + } +} static bool nv04_dac_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, diff --git a/drivers/gpu/drm/nouveau/nv17_tv.c b/drivers/gpu/drm/nouveau/nv17_tv.c index 81c01353a9f9..5fa4242e4c7d 100644 --- a/drivers/gpu/drm/nouveau/nv17_tv.c +++ b/drivers/gpu/drm/nouveau/nv17_tv.c @@ -33,13 +33,15 @@ #include "nouveau_hw.h" #include "nv17_tv.h" -enum drm_connector_status nv17_tv_detect(struct drm_encoder *encoder, - struct drm_connector *connector, - uint32_t pin_mask) +static enum drm_connector_status +nv17_tv_detect(struct drm_encoder *encoder, struct drm_connector *connector) { + struct drm_device *dev = encoder->dev; + struct drm_mode_config *conf = &dev->mode_config; struct nv17_tv_encoder *tv_enc = to_tv_enc(encoder); + struct dcb_entry *dcb = tv_enc->base.dcb; - tv_enc->pin_mask = pin_mask >> 28 & 0xe; + tv_enc->pin_mask = nv17_dac_sample_load(encoder) >> 28 & 0xe; switch (tv_enc->pin_mask) { case 0x2: @@ -50,7 +52,7 @@ enum drm_connector_status nv17_tv_detect(struct drm_encoder *encoder, tv_enc->subconnector = DRM_MODE_SUBCONNECTOR_SVIDEO; break; case 0xe: - if (nouveau_encoder(encoder)->dcb->tvconf.has_component_output) + if (dcb->tvconf.has_component_output) tv_enc->subconnector = DRM_MODE_SUBCONNECTOR_Component; else tv_enc->subconnector = DRM_MODE_SUBCONNECTOR_SCART; @@ -61,11 +63,16 @@ enum drm_connector_status nv17_tv_detect(struct drm_encoder *encoder, } drm_connector_property_set_value(connector, - encoder->dev->mode_config.tv_subconnector_property, - tv_enc->subconnector); + conf->tv_subconnector_property, + tv_enc->subconnector); - return tv_enc->subconnector ? connector_status_connected : - connector_status_disconnected; + if (tv_enc->subconnector) { + NV_INFO(dev, "Load detected on output %c\n", + '@' + ffs(dcb->or)); + return connector_status_connected; + } else { + return connector_status_disconnected; + } } static const struct { @@ -633,7 +640,7 @@ static struct drm_encoder_helper_funcs nv17_tv_helper_funcs = { .prepare = nv17_tv_prepare, .commit = nv17_tv_commit, .mode_set = nv17_tv_mode_set, - .detect = nv17_dac_detect, + .detect = nv17_tv_detect, }; static struct drm_encoder_slave_funcs nv17_tv_slave_funcs = { From 0829168b474663d8b13f6105368dbbf4a1a03256 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Thu, 17 Dec 2009 18:57:44 +0100 Subject: [PATCH 0595/1626] drm/nouveau: Implement nv42-nv43 TV load detection. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nv17_tv.c | 90 ++++++++++++++++++++++++++++++- 1 file changed, 89 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv17_tv.c b/drivers/gpu/drm/nouveau/nv17_tv.c index 5fa4242e4c7d..58b917c3341b 100644 --- a/drivers/gpu/drm/nouveau/nv17_tv.c +++ b/drivers/gpu/drm/nouveau/nv17_tv.c @@ -33,15 +33,103 @@ #include "nouveau_hw.h" #include "nv17_tv.h" +static uint32_t nv42_tv_sample_load(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_nouveau_private *dev_priv = dev->dev_private; + uint32_t testval, regoffset = nv04_dac_output_offset(encoder); + uint32_t gpio0, gpio1, fp_htotal, fp_hsync_start, fp_hsync_end, + fp_control, test_ctrl, dacclk, ctv_14, ctv_1c, ctv_6c; + uint32_t sample = 0; + int head; + +#define RGB_TEST_DATA(r, g, b) (r << 0 | g << 10 | b << 20) + testval = RGB_TEST_DATA(0x82, 0xeb, 0x82); + if (dev_priv->vbios->tvdactestval) + testval = dev_priv->vbios->tvdactestval; + + dacclk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset); + head = (dacclk & 0x100) >> 8; + + /* Save the previous state. */ + gpio1 = nv17_gpio_get(dev, DCB_GPIO_TVDAC1); + gpio0 = nv17_gpio_get(dev, DCB_GPIO_TVDAC0); + fp_htotal = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_HTOTAL); + fp_hsync_start = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_START); + fp_hsync_end = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_END); + fp_control = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL); + test_ctrl = NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset); + ctv_1c = NVReadRAMDAC(dev, head, 0x680c1c); + ctv_14 = NVReadRAMDAC(dev, head, 0x680c14); + ctv_6c = NVReadRAMDAC(dev, head, 0x680c6c); + + /* Prepare the DAC for load detection. */ + nv17_gpio_set(dev, DCB_GPIO_TVDAC1, true); + nv17_gpio_set(dev, DCB_GPIO_TVDAC0, true); + + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HTOTAL, 1343); + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_START, 1047); + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_END, 1183); + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL, + NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS | + NV_PRAMDAC_FP_TG_CONTROL_WIDTH_12 | + NV_PRAMDAC_FP_TG_CONTROL_READ_PROG | + NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS | + NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS); + + NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset, 0); + + NVWriteRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset, + (dacclk & ~0xff) | 0x22); + msleep(1); + NVWriteRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset, + (dacclk & ~0xff) | 0x21); + + NVWriteRAMDAC(dev, head, 0x680c1c, 1 << 20); + NVWriteRAMDAC(dev, head, 0x680c14, 4 << 16); + + /* Sample pin 0x4 (usually S-video luma). */ + NVWriteRAMDAC(dev, head, 0x680c6c, testval >> 10 & 0x3ff); + msleep(20); + sample |= NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset) + & 0x4 << 28; + + /* Sample the remaining pins. */ + NVWriteRAMDAC(dev, head, 0x680c6c, testval & 0x3ff); + msleep(20); + sample |= NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset) + & 0xa << 28; + + /* Restore the previous state. */ + NVWriteRAMDAC(dev, head, 0x680c1c, ctv_1c); + NVWriteRAMDAC(dev, head, 0x680c14, ctv_14); + NVWriteRAMDAC(dev, head, 0x680c6c, ctv_6c); + NVWriteRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset, dacclk); + NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset, test_ctrl); + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL, fp_control); + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_END, fp_hsync_end); + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_START, fp_hsync_start); + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HTOTAL, fp_htotal); + nv17_gpio_set(dev, DCB_GPIO_TVDAC1, gpio1); + nv17_gpio_set(dev, DCB_GPIO_TVDAC0, gpio0); + + return sample; +} + static enum drm_connector_status nv17_tv_detect(struct drm_encoder *encoder, struct drm_connector *connector) { struct drm_device *dev = encoder->dev; + struct drm_nouveau_private *dev_priv = dev->dev_private; struct drm_mode_config *conf = &dev->mode_config; struct nv17_tv_encoder *tv_enc = to_tv_enc(encoder); struct dcb_entry *dcb = tv_enc->base.dcb; - tv_enc->pin_mask = nv17_dac_sample_load(encoder) >> 28 & 0xe; + if (dev_priv->chipset == 0x42 || + dev_priv->chipset == 0x43) + tv_enc->pin_mask = nv42_tv_sample_load(encoder) >> 28 & 0xe; + else + tv_enc->pin_mask = nv17_dac_sample_load(encoder) >> 28 & 0xe; switch (tv_enc->pin_mask) { case 0x2: From 111b459af191891f49682f21e11f348703cd8bdd Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Tue, 22 Dec 2009 18:24:09 +0100 Subject: [PATCH 0596/1626] drm/nouveau: Don't skip card take down on nv0x. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_state.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 6a459139910f..a6b573e89829 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -722,8 +722,8 @@ static void nouveau_close(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; - /* In the case of an error dev_priv may not be be allocated yet */ - if (dev_priv && dev_priv->card_type) + /* In the case of an error dev_priv may not be allocated yet */ + if (dev_priv) nouveau_card_takedown(dev); } From 1c7059e4f36e76c72cefbb6c9bd2bcf45c12e777 Mon Sep 17 00:00:00 2001 From: Maarten Maathuis Date: Fri, 25 Dec 2009 18:51:17 +0100 Subject: [PATCH 0597/1626] drm/nouveau: better alignment of bo sizes and use roundup instead of ALIGN - Aligning to block size should ensure that the extra size is enough. - Using roundup, because not all sizes are powers of two. Signed-off-by: Maarten Maathuis --- drivers/gpu/drm/nouveau/nouveau_bo.c | 8 ++++++-- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 4 ++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 5fd462f49407..a0c9e00e7062 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -73,6 +73,7 @@ nouveau_bo_fixup_align(struct drm_device *dev, case 0x4800: case 0x7a00: if (dev_priv->chipset >= 0xA0) { + *size = roundup(*size, 28672); /* This is based on high end cards with 448 bits * memory bus, could be different elsewhere.*/ *size += 6 * 28672; @@ -80,9 +81,11 @@ nouveau_bo_fixup_align(struct drm_device *dev, * but we must also align to page size. */ *align = 2 * 8 * 28672; } else if (dev_priv->chipset >= 0x90) { + *size = roundup(*size, 16384); *size += 3 * 16384; *align = 12 * 16384; } else { + *size = roundup(*size, 8192); *size += 3 * 8192; /* 12 * 8192 is the actual alignment requirement * but we must also align to page size. */ @@ -114,10 +117,11 @@ nouveau_bo_fixup_align(struct drm_device *dev, } } - *size = ALIGN(*size, PAGE_SIZE); + /* ALIGN works only on powers of two. */ + *size = roundup(*size, PAGE_SIZE); if (dev_priv->card_type == NV_50) { - *size = ALIGN(*size, 65536); + *size = roundup(*size, 65536); *align = max(65536, *align); } } diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 84af25c238b6..44cbbeeb7745 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -212,11 +212,11 @@ nouveau_fbcon_create(struct drm_device *dev, uint32_t fb_width, mode_cmd.bpp = surface_bpp; mode_cmd.pitch = mode_cmd.width * (mode_cmd.bpp >> 3); - mode_cmd.pitch = ALIGN(mode_cmd.pitch, 256); + mode_cmd.pitch = roundup(mode_cmd.pitch, 256); mode_cmd.depth = surface_depth; size = mode_cmd.pitch * mode_cmd.height; - size = ALIGN(size, PAGE_SIZE); + size = roundup(size, PAGE_SIZE); ret = nouveau_gem_new(dev, dev_priv->channel, size, 0, TTM_PL_FLAG_VRAM, 0, 0x0000, false, true, &nvbo); From a510604df9444a2a1bdecafc048749e0f35816b5 Mon Sep 17 00:00:00 2001 From: Maarten Maathuis Date: Sat, 26 Dec 2009 21:46:36 +0100 Subject: [PATCH 0598/1626] drm/nv50: make the blocksize depend on vram size - This should be better than what we have now. - I'm less sure about the non power of two path. Signed-off-by: Maarten Maathuis --- drivers/gpu/drm/nouveau/nouveau_bo.c | 36 +++++++++++++++------------- 1 file changed, 19 insertions(+), 17 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index a0c9e00e7062..e342a418d434 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -33,6 +33,8 @@ #include "nouveau_drv.h" #include "nouveau_dma.h" +#include + static void nouveau_bo_del_ttm(struct ttm_buffer_object *bo) { @@ -67,29 +69,29 @@ nouveau_bo_fixup_align(struct drm_device *dev, * avoid corruption of other buffer objects. */ if (dev_priv->card_type == NV_50) { + uint32_t block_size = nouveau_mem_fb_amount(dev) >> 15; + int i; + switch (tile_flags) { case 0x1800: case 0x2800: case 0x4800: case 0x7a00: - if (dev_priv->chipset >= 0xA0) { - *size = roundup(*size, 28672); - /* This is based on high end cards with 448 bits - * memory bus, could be different elsewhere.*/ - *size += 6 * 28672; - /* 8 * 28672 is the actual alignment requirement - * but we must also align to page size. */ - *align = 2 * 8 * 28672; - } else if (dev_priv->chipset >= 0x90) { - *size = roundup(*size, 16384); - *size += 3 * 16384; - *align = 12 * 16384; + *size = roundup(*size, block_size); + if (is_power_of_2(block_size)) { + *size += 3 * block_size; + for (i = 1; i < 10; i++) { + *align = 12 * i * block_size; + if (!(*align % 65536)) + break; + } } else { - *size = roundup(*size, 8192); - *size += 3 * 8192; - /* 12 * 8192 is the actual alignment requirement - * but we must also align to page size. */ - *align = 2 * 12 * 8192; + *size += 6 * block_size; + for (i = 1; i < 10; i++) { + *align = 8 * i * block_size; + if (!(*align % 65536)) + break; + } } break; default: From f03a314b4671407c4ff69a2d85e72413e8064c48 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sat, 26 Dec 2009 02:42:45 +0100 Subject: [PATCH 0599/1626] drm/nouveau: Allocate a per-channel instance of NV_SW. It will be useful for various synchronization purposes, mostly stolen from "[PATCH] drm/nv50: synchronize user channel after buffer object move on kernel channel" by Maarten Maathuis. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_channel.c | 4 +++- drivers/gpu/drm/nouveau/nouveau_dma.c | 17 +++++++++++++++++ drivers/gpu/drm/nouveau/nouveau_dma.h | 10 ++++++---- drivers/gpu/drm/nouveau/nouveau_drv.h | 20 +++++++++++--------- drivers/gpu/drm/nouveau/nouveau_object.c | 2 +- drivers/gpu/drm/nouveau/nv04_fbcon.c | 19 ++++++++++--------- 6 files changed, 48 insertions(+), 24 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c index 9aaa972f8822..4f378b68fe7b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_channel.c +++ b/drivers/gpu/drm/nouveau/nouveau_channel.c @@ -414,7 +414,9 @@ nouveau_ioctl_fifo_alloc(struct drm_device *dev, void *data, init->subchan[0].grclass = 0x0039; else init->subchan[0].grclass = 0x5039; - init->nr_subchan = 1; + init->subchan[1].handle = NvSw; + init->subchan[1].grclass = NV_SW; + init->nr_subchan = 2; /* Named memory object area */ ret = drm_gem_handle_create(file_priv, chan->notifier_bo->gem, diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.c b/drivers/gpu/drm/nouveau/nouveau_dma.c index 703553687b20..f1fd3f2b9813 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dma.c +++ b/drivers/gpu/drm/nouveau/nouveau_dma.c @@ -35,6 +35,7 @@ nouveau_dma_init(struct nouveau_channel *chan) struct drm_device *dev = chan->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_gpuobj *m2mf = NULL; + struct nouveau_gpuobj *nvsw = NULL; int ret, i; /* Create NV_MEMORY_TO_MEMORY_FORMAT for buffer moves */ @@ -47,6 +48,15 @@ nouveau_dma_init(struct nouveau_channel *chan) if (ret) return ret; + /* Create an NV_SW object for various sync purposes */ + ret = nouveau_gpuobj_sw_new(chan, NV_SW, &nvsw); + if (ret) + return ret; + + ret = nouveau_gpuobj_ref_add(dev, chan, NvSw, nvsw, NULL); + if (ret) + return ret; + /* NV_MEMORY_TO_MEMORY_FORMAT requires a notifier object */ ret = nouveau_notifier_alloc(chan, NvNotify0, 32, &chan->m2mf_ntfy); if (ret) @@ -87,6 +97,13 @@ nouveau_dma_init(struct nouveau_channel *chan) BEGIN_RING(chan, NvSubM2MF, NV_MEMORY_TO_MEMORY_FORMAT_DMA_NOTIFY, 1); OUT_RING(chan, NvNotify0); + /* Initialise NV_SW */ + ret = RING_SPACE(chan, 2); + if (ret) + return ret; + BEGIN_RING(chan, NvSubSw, 0, 1); + OUT_RING(chan, NvSw); + /* Sit back and pray the channel works.. */ FIRE_RING(chan); diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.h b/drivers/gpu/drm/nouveau/nouveau_dma.h index 04e85d8f757e..dabfd655f93e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dma.h +++ b/drivers/gpu/drm/nouveau/nouveau_dma.h @@ -46,10 +46,11 @@ /* Hardcoded object assignments to subchannels (subchannel id). */ enum { NvSubM2MF = 0, - NvSub2D = 1, - NvSubCtxSurf2D = 1, - NvSubGdiRect = 2, - NvSubImageBlit = 3 + NvSubSw = 1, + NvSub2D = 2, + NvSubCtxSurf2D = 2, + NvSubGdiRect = 3, + NvSubImageBlit = 4 }; /* Object handles. */ @@ -67,6 +68,7 @@ enum { NvClipRect = 0x8000000b, NvGdiRect = 0x8000000c, NvImageBlit = 0x8000000d, + NvSw = 0x8000000e, /* G80+ display objects */ NvEvoVRAM = 0x01000000, diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 7da88a92c83f..9181eaefe918 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -788,6 +788,8 @@ extern int nouveau_gpuobj_gart_dma_new(struct nouveau_channel *, uint32_t *o_ret); extern int nouveau_gpuobj_gr_new(struct nouveau_channel *, int class, struct nouveau_gpuobj **); +extern int nouveau_gpuobj_sw_new(struct nouveau_channel *, int class, + struct nouveau_gpuobj **); extern int nouveau_ioctl_grobj_alloc(struct drm_device *, void *data, struct drm_file *); extern int nouveau_ioctl_gpuobj_free(struct drm_device *, void *data, @@ -1330,14 +1332,14 @@ nv_two_reg_pll(struct drm_device *dev) return false; } -#define NV50_NVSW 0x0000506e -#define NV50_NVSW_DMA_SEMAPHORE 0x00000060 -#define NV50_NVSW_SEMAPHORE_OFFSET 0x00000064 -#define NV50_NVSW_SEMAPHORE_ACQUIRE 0x00000068 -#define NV50_NVSW_SEMAPHORE_RELEASE 0x0000006c -#define NV50_NVSW_DMA_VBLSEM 0x0000018c -#define NV50_NVSW_VBLSEM_OFFSET 0x00000400 -#define NV50_NVSW_VBLSEM_RELEASE_VALUE 0x00000404 -#define NV50_NVSW_VBLSEM_RELEASE 0x00000408 +#define NV_SW 0x0000506e +#define NV_SW_DMA_SEMAPHORE 0x00000060 +#define NV_SW_SEMAPHORE_OFFSET 0x00000064 +#define NV_SW_SEMAPHORE_ACQUIRE 0x00000068 +#define NV_SW_SEMAPHORE_RELEASE 0x0000006c +#define NV_SW_DMA_VBLSEM 0x0000018c +#define NV_SW_VBLSEM_OFFSET 0x00000400 +#define NV_SW_VBLSEM_RELEASE_VALUE 0x00000404 +#define NV_SW_VBLSEM_RELEASE 0x00000408 #endif /* __NOUVEAU_DRV_H__ */ diff --git a/drivers/gpu/drm/nouveau/nouveau_object.c b/drivers/gpu/drm/nouveau/nouveau_object.c index 93379bb81bea..6c2cf81716df 100644 --- a/drivers/gpu/drm/nouveau/nouveau_object.c +++ b/drivers/gpu/drm/nouveau/nouveau_object.c @@ -881,7 +881,7 @@ nouveau_gpuobj_gr_new(struct nouveau_channel *chan, int class, return 0; } -static int +int nouveau_gpuobj_sw_new(struct nouveau_channel *chan, int class, struct nouveau_gpuobj **gpuobj_ret) { diff --git a/drivers/gpu/drm/nouveau/nv04_fbcon.c b/drivers/gpu/drm/nouveau/nv04_fbcon.c index 09a31071ee58..d2d7f0838dc9 100644 --- a/drivers/gpu/drm/nouveau/nv04_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv04_fbcon.c @@ -184,6 +184,7 @@ nv04_fbcon_accel_init(struct fb_info *info) struct drm_device *dev = par->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_channel *chan = dev_priv->channel; + const int sub = NvSubCtxSurf2D; int surface_fmt, pattern_fmt, rect_fmt; int ret; @@ -247,25 +248,25 @@ nv04_fbcon_accel_init(struct fb_info *info) return 0; } - BEGIN_RING(chan, 1, 0x0000, 1); + BEGIN_RING(chan, sub, 0x0000, 1); OUT_RING(chan, NvCtxSurf2D); - BEGIN_RING(chan, 1, 0x0184, 2); + BEGIN_RING(chan, sub, 0x0184, 2); OUT_RING(chan, NvDmaFB); OUT_RING(chan, NvDmaFB); - BEGIN_RING(chan, 1, 0x0300, 4); + BEGIN_RING(chan, sub, 0x0300, 4); OUT_RING(chan, surface_fmt); OUT_RING(chan, info->fix.line_length | (info->fix.line_length << 16)); OUT_RING(chan, info->fix.smem_start - dev->mode_config.fb_base); OUT_RING(chan, info->fix.smem_start - dev->mode_config.fb_base); - BEGIN_RING(chan, 1, 0x0000, 1); + BEGIN_RING(chan, sub, 0x0000, 1); OUT_RING(chan, NvRop); - BEGIN_RING(chan, 1, 0x0300, 1); + BEGIN_RING(chan, sub, 0x0300, 1); OUT_RING(chan, 0x55); - BEGIN_RING(chan, 1, 0x0000, 1); + BEGIN_RING(chan, sub, 0x0000, 1); OUT_RING(chan, NvImagePatt); - BEGIN_RING(chan, 1, 0x0300, 8); + BEGIN_RING(chan, sub, 0x0300, 8); OUT_RING(chan, pattern_fmt); #ifdef __BIG_ENDIAN OUT_RING(chan, 2); @@ -279,9 +280,9 @@ nv04_fbcon_accel_init(struct fb_info *info) OUT_RING(chan, ~0); OUT_RING(chan, ~0); - BEGIN_RING(chan, 1, 0x0000, 1); + BEGIN_RING(chan, sub, 0x0000, 1); OUT_RING(chan, NvClipRect); - BEGIN_RING(chan, 1, 0x0300, 2); + BEGIN_RING(chan, sub, 0x0300, 2); OUT_RING(chan, 0); OUT_RING(chan, (info->var.yres_virtual << 16) | info->var.xres_virtual); From 8c032ce73ef3a9e5a14c35ea3de19f1b9a8d7c0d Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sat, 26 Dec 2009 02:09:36 +0100 Subject: [PATCH 0600/1626] drm/nouveau: Use the software object for fencing. This should avoid a race condition on nv0x, if we're doing it with actual PGRAPH objects and a there's a fence within the FIFO DMA fetch area when a context switch kicks in. In that case we get an ILLEGAL_MTHD interrupt as expected, but the values in PGRAPH_TRAPPED_ADDR aren't calculated correctly and they're almost useless (e.g. you can see ILLEGAL_MTHDs for the now inactive channel, with a wrong offset/data pair). Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_fence.c | 2 +- drivers/gpu/drm/nouveau/nv04_graph.c | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c index dacac9a0842a..faddf53ff9ed 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fence.c +++ b/drivers/gpu/drm/nouveau/nouveau_fence.c @@ -142,7 +142,7 @@ nouveau_fence_emit(struct nouveau_fence *fence) list_add_tail(&fence->entry, &chan->fence.pending); spin_unlock_irqrestore(&chan->fence.lock, flags); - BEGIN_RING(chan, NvSubM2MF, USE_REFCNT ? 0x0050 : 0x0150, 1); + BEGIN_RING(chan, NvSubSw, USE_REFCNT ? 0x0050 : 0x0150, 1); OUT_RING(chan, fence->sequence); FIRE_RING(chan); diff --git a/drivers/gpu/drm/nouveau/nv04_graph.c b/drivers/gpu/drm/nouveau/nv04_graph.c index d561d773c0f4..82c77f9d4695 100644 --- a/drivers/gpu/drm/nouveau/nv04_graph.c +++ b/drivers/gpu/drm/nouveau/nv04_graph.c @@ -547,7 +547,7 @@ nv04_graph_mthd_set_operation(struct nouveau_channel *chan, int grclass, return 0; } -static struct nouveau_pgraph_object_method nv04_graph_mthds_m2mf[] = { +static struct nouveau_pgraph_object_method nv04_graph_mthds_sw[] = { { 0x0150, nv04_graph_mthd_set_ref }, {} }; @@ -558,7 +558,7 @@ static struct nouveau_pgraph_object_method nv04_graph_mthds_set_operation[] = { }; struct nouveau_pgraph_object_class nv04_graph_grclass[] = { - { 0x0039, false, nv04_graph_mthds_m2mf }, + { 0x0039, false, NULL }, { 0x004a, false, nv04_graph_mthds_set_operation }, /* gdirect */ { 0x005f, false, nv04_graph_mthds_set_operation }, /* imageblit */ { 0x0061, false, nv04_graph_mthds_set_operation }, /* ifc */ @@ -574,6 +574,7 @@ struct nouveau_pgraph_object_class nv04_graph_grclass[] = { { 0x0053, false, NULL }, /* surf3d */ { 0x0054, false, NULL }, /* tex_tri */ { 0x0055, false, NULL }, /* multitex_tri */ + { 0x506e, true, nv04_graph_mthds_sw }, {} }; From be9721a951bd5ee6346dd2f3eed8a6fd1761c186 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sat, 26 Dec 2009 14:39:46 +0100 Subject: [PATCH 0601/1626] drm/nv04: Context switching fixes. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nv04_graph.c | 152 ++++++++++++++------------- 1 file changed, 78 insertions(+), 74 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nv04_graph.c b/drivers/gpu/drm/nouveau/nv04_graph.c index 82c77f9d4695..98f3b40318d4 100644 --- a/drivers/gpu/drm/nouveau/nv04_graph.c +++ b/drivers/gpu/drm/nouveau/nv04_graph.c @@ -28,6 +28,10 @@ #include "nouveau_drv.h" static uint32_t nv04_graph_ctx_regs[] = { + 0x0040053c, + 0x00400544, + 0x00400540, + 0x00400548, NV04_PGRAPH_CTX_SWITCH1, NV04_PGRAPH_CTX_SWITCH2, NV04_PGRAPH_CTX_SWITCH3, @@ -102,69 +106,69 @@ static uint32_t nv04_graph_ctx_regs[] = { NV04_PGRAPH_PATT_COLOR0, NV04_PGRAPH_PATT_COLOR1, NV04_PGRAPH_PATT_COLORRAM+0x00, - NV04_PGRAPH_PATT_COLORRAM+0x01, - NV04_PGRAPH_PATT_COLORRAM+0x02, - NV04_PGRAPH_PATT_COLORRAM+0x03, NV04_PGRAPH_PATT_COLORRAM+0x04, - NV04_PGRAPH_PATT_COLORRAM+0x05, - NV04_PGRAPH_PATT_COLORRAM+0x06, - NV04_PGRAPH_PATT_COLORRAM+0x07, NV04_PGRAPH_PATT_COLORRAM+0x08, - NV04_PGRAPH_PATT_COLORRAM+0x09, - NV04_PGRAPH_PATT_COLORRAM+0x0A, - NV04_PGRAPH_PATT_COLORRAM+0x0B, - NV04_PGRAPH_PATT_COLORRAM+0x0C, - NV04_PGRAPH_PATT_COLORRAM+0x0D, - NV04_PGRAPH_PATT_COLORRAM+0x0E, - NV04_PGRAPH_PATT_COLORRAM+0x0F, + NV04_PGRAPH_PATT_COLORRAM+0x0c, NV04_PGRAPH_PATT_COLORRAM+0x10, - NV04_PGRAPH_PATT_COLORRAM+0x11, - NV04_PGRAPH_PATT_COLORRAM+0x12, - NV04_PGRAPH_PATT_COLORRAM+0x13, NV04_PGRAPH_PATT_COLORRAM+0x14, - NV04_PGRAPH_PATT_COLORRAM+0x15, - NV04_PGRAPH_PATT_COLORRAM+0x16, - NV04_PGRAPH_PATT_COLORRAM+0x17, NV04_PGRAPH_PATT_COLORRAM+0x18, - NV04_PGRAPH_PATT_COLORRAM+0x19, - NV04_PGRAPH_PATT_COLORRAM+0x1A, - NV04_PGRAPH_PATT_COLORRAM+0x1B, - NV04_PGRAPH_PATT_COLORRAM+0x1C, - NV04_PGRAPH_PATT_COLORRAM+0x1D, - NV04_PGRAPH_PATT_COLORRAM+0x1E, - NV04_PGRAPH_PATT_COLORRAM+0x1F, + NV04_PGRAPH_PATT_COLORRAM+0x1c, NV04_PGRAPH_PATT_COLORRAM+0x20, - NV04_PGRAPH_PATT_COLORRAM+0x21, - NV04_PGRAPH_PATT_COLORRAM+0x22, - NV04_PGRAPH_PATT_COLORRAM+0x23, NV04_PGRAPH_PATT_COLORRAM+0x24, - NV04_PGRAPH_PATT_COLORRAM+0x25, - NV04_PGRAPH_PATT_COLORRAM+0x26, - NV04_PGRAPH_PATT_COLORRAM+0x27, NV04_PGRAPH_PATT_COLORRAM+0x28, - NV04_PGRAPH_PATT_COLORRAM+0x29, - NV04_PGRAPH_PATT_COLORRAM+0x2A, - NV04_PGRAPH_PATT_COLORRAM+0x2B, - NV04_PGRAPH_PATT_COLORRAM+0x2C, - NV04_PGRAPH_PATT_COLORRAM+0x2D, - NV04_PGRAPH_PATT_COLORRAM+0x2E, - NV04_PGRAPH_PATT_COLORRAM+0x2F, + NV04_PGRAPH_PATT_COLORRAM+0x2c, NV04_PGRAPH_PATT_COLORRAM+0x30, - NV04_PGRAPH_PATT_COLORRAM+0x31, - NV04_PGRAPH_PATT_COLORRAM+0x32, - NV04_PGRAPH_PATT_COLORRAM+0x33, NV04_PGRAPH_PATT_COLORRAM+0x34, - NV04_PGRAPH_PATT_COLORRAM+0x35, - NV04_PGRAPH_PATT_COLORRAM+0x36, - NV04_PGRAPH_PATT_COLORRAM+0x37, NV04_PGRAPH_PATT_COLORRAM+0x38, - NV04_PGRAPH_PATT_COLORRAM+0x39, - NV04_PGRAPH_PATT_COLORRAM+0x3A, - NV04_PGRAPH_PATT_COLORRAM+0x3B, - NV04_PGRAPH_PATT_COLORRAM+0x3C, - NV04_PGRAPH_PATT_COLORRAM+0x3D, - NV04_PGRAPH_PATT_COLORRAM+0x3E, - NV04_PGRAPH_PATT_COLORRAM+0x3F, + NV04_PGRAPH_PATT_COLORRAM+0x3c, + NV04_PGRAPH_PATT_COLORRAM+0x40, + NV04_PGRAPH_PATT_COLORRAM+0x44, + NV04_PGRAPH_PATT_COLORRAM+0x48, + NV04_PGRAPH_PATT_COLORRAM+0x4c, + NV04_PGRAPH_PATT_COLORRAM+0x50, + NV04_PGRAPH_PATT_COLORRAM+0x54, + NV04_PGRAPH_PATT_COLORRAM+0x58, + NV04_PGRAPH_PATT_COLORRAM+0x5c, + NV04_PGRAPH_PATT_COLORRAM+0x60, + NV04_PGRAPH_PATT_COLORRAM+0x64, + NV04_PGRAPH_PATT_COLORRAM+0x68, + NV04_PGRAPH_PATT_COLORRAM+0x6c, + NV04_PGRAPH_PATT_COLORRAM+0x70, + NV04_PGRAPH_PATT_COLORRAM+0x74, + NV04_PGRAPH_PATT_COLORRAM+0x78, + NV04_PGRAPH_PATT_COLORRAM+0x7c, + NV04_PGRAPH_PATT_COLORRAM+0x80, + NV04_PGRAPH_PATT_COLORRAM+0x84, + NV04_PGRAPH_PATT_COLORRAM+0x88, + NV04_PGRAPH_PATT_COLORRAM+0x8c, + NV04_PGRAPH_PATT_COLORRAM+0x90, + NV04_PGRAPH_PATT_COLORRAM+0x94, + NV04_PGRAPH_PATT_COLORRAM+0x98, + NV04_PGRAPH_PATT_COLORRAM+0x9c, + NV04_PGRAPH_PATT_COLORRAM+0xa0, + NV04_PGRAPH_PATT_COLORRAM+0xa4, + NV04_PGRAPH_PATT_COLORRAM+0xa8, + NV04_PGRAPH_PATT_COLORRAM+0xac, + NV04_PGRAPH_PATT_COLORRAM+0xb0, + NV04_PGRAPH_PATT_COLORRAM+0xb4, + NV04_PGRAPH_PATT_COLORRAM+0xb8, + NV04_PGRAPH_PATT_COLORRAM+0xbc, + NV04_PGRAPH_PATT_COLORRAM+0xc0, + NV04_PGRAPH_PATT_COLORRAM+0xc4, + NV04_PGRAPH_PATT_COLORRAM+0xc8, + NV04_PGRAPH_PATT_COLORRAM+0xcc, + NV04_PGRAPH_PATT_COLORRAM+0xd0, + NV04_PGRAPH_PATT_COLORRAM+0xd4, + NV04_PGRAPH_PATT_COLORRAM+0xd8, + NV04_PGRAPH_PATT_COLORRAM+0xdc, + NV04_PGRAPH_PATT_COLORRAM+0xe0, + NV04_PGRAPH_PATT_COLORRAM+0xe4, + NV04_PGRAPH_PATT_COLORRAM+0xe8, + NV04_PGRAPH_PATT_COLORRAM+0xec, + NV04_PGRAPH_PATT_COLORRAM+0xf0, + NV04_PGRAPH_PATT_COLORRAM+0xf4, + NV04_PGRAPH_PATT_COLORRAM+0xf8, + NV04_PGRAPH_PATT_COLORRAM+0xfc, NV04_PGRAPH_PATTERN, 0x0040080c, NV04_PGRAPH_PATTERN_SHAPE, @@ -247,14 +251,6 @@ static uint32_t nv04_graph_ctx_regs[] = { 0x004004f8, 0x0040047c, 0x004004fc, - 0x0040053c, - 0x00400544, - 0x00400540, - 0x00400548, - 0x00400560, - 0x00400568, - 0x00400564, - 0x0040056c, 0x00400534, 0x00400538, 0x00400514, @@ -341,9 +337,8 @@ static uint32_t nv04_graph_ctx_regs[] = { 0x00400500, 0x00400504, NV04_PGRAPH_VALID1, - NV04_PGRAPH_VALID2 - - + NV04_PGRAPH_VALID2, + NV04_PGRAPH_DEBUG_3 }; struct graph_state { @@ -388,6 +383,18 @@ nv04_graph_context_switch(struct drm_device *dev) pgraph->fifo_access(dev, true); } +static uint32_t *ctx_reg(struct graph_state *ctx, uint32_t reg) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(nv04_graph_ctx_regs); i++) { + if (nv04_graph_ctx_regs[i] == reg) + return &ctx->nv04[i]; + } + + return NULL; +} + int nv04_graph_create_context(struct nouveau_channel *chan) { struct graph_state *pgraph_ctx; @@ -398,15 +405,8 @@ int nv04_graph_create_context(struct nouveau_channel *chan) if (pgraph_ctx == NULL) return -ENOMEM; - /* dev_priv->fifos[channel].pgraph_ctx_user = channel << 24; */ - pgraph_ctx->nv04[0] = 0x0001ffff; - /* is it really needed ??? */ -#if 0 - dev_priv->fifos[channel].pgraph_ctx[1] = - nv_rd32(dev, NV_PGRAPH_DEBUG_4); - dev_priv->fifos[channel].pgraph_ctx[2] = - nv_rd32(dev, 0x004006b0); -#endif + *ctx_reg(pgraph_ctx, NV04_PGRAPH_DEBUG_3) = 0xfad4ff31; + return 0; } @@ -429,9 +429,13 @@ int nv04_graph_load_context(struct nouveau_channel *chan) nv_wr32(dev, nv04_graph_ctx_regs[i], pgraph_ctx->nv04[i]); nv_wr32(dev, NV04_PGRAPH_CTX_CONTROL, 0x10010100); - nv_wr32(dev, NV04_PGRAPH_CTX_USER, chan->id << 24); + + tmp = nv_rd32(dev, NV04_PGRAPH_CTX_USER) & 0x00ffffff; + nv_wr32(dev, NV04_PGRAPH_CTX_USER, tmp | chan->id << 24); + tmp = nv_rd32(dev, NV04_PGRAPH_FFINTFC_ST2); nv_wr32(dev, NV04_PGRAPH_FFINTFC_ST2, tmp & 0x000fffff); + return 0; } @@ -494,7 +498,7 @@ int nv04_graph_init(struct drm_device *dev) nv_wr32(dev, NV04_PGRAPH_STATE , 0xFFFFFFFF); nv_wr32(dev, NV04_PGRAPH_CTX_CONTROL , 0x10000100); tmp = nv_rd32(dev, NV04_PGRAPH_CTX_USER) & 0x00ffffff; - tmp |= dev_priv->engine.fifo.channels << 24; + tmp |= (dev_priv->engine.fifo.channels - 1) << 24; nv_wr32(dev, NV04_PGRAPH_CTX_USER, tmp); /* These don't belong here, they're part of a per-channel context */ From bf5302b9496b25fe80ffa8a4fd191ad95c217864 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 4 Jan 2010 09:10:55 +1000 Subject: [PATCH 0602/1626] drm/nouveau: fix handling of fbcon colours in 8bpp Depending on the visual, the colours handed to us in fillrect() can either be an actual colour, or an index into the pseudo-palette. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv04_fbcon.c | 7 +++++-- drivers/gpu/drm/nouveau/nv50_fbcon.c | 7 +++++-- 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nv04_fbcon.c b/drivers/gpu/drm/nouveau/nv04_fbcon.c index d2d7f0838dc9..bd08a0dc9841 100644 --- a/drivers/gpu/drm/nouveau/nv04_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv04_fbcon.c @@ -62,7 +62,6 @@ nv04_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) struct drm_device *dev = par->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_channel *chan = dev_priv->channel; - uint32_t color = ((uint32_t *) info->pseudo_palette)[rect->color]; if (info->state != FBINFO_STATE_RUNNING) return; @@ -80,7 +79,11 @@ nv04_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) BEGIN_RING(chan, NvSubGdiRect, 0x02fc, 1); OUT_RING(chan, (rect->rop != ROP_COPY) ? 1 : 3); BEGIN_RING(chan, NvSubGdiRect, 0x03fc, 1); - OUT_RING(chan, color); + if (info->fix.visual == FB_VISUAL_TRUECOLOR || + info->fix.visual == FB_VISUAL_DIRECTCOLOR) + OUT_RING(chan, ((uint32_t *)info->pseudo_palette)[rect->color]); + else + OUT_RING(chan, rect->color); BEGIN_RING(chan, NvSubGdiRect, 0x0400, 2); OUT_RING(chan, (rect->dx << 16) | rect->dy); OUT_RING(chan, (rect->width << 16) | rect->height); diff --git a/drivers/gpu/drm/nouveau/nv50_fbcon.c b/drivers/gpu/drm/nouveau/nv50_fbcon.c index c966ef834853..cc34356ab0b5 100644 --- a/drivers/gpu/drm/nouveau/nv50_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv50_fbcon.c @@ -10,7 +10,6 @@ nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) struct drm_device *dev = par->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_channel *chan = dev_priv->channel; - uint32_t color = ((uint32_t *) info->pseudo_palette)[rect->color]; if (info->state != FBINFO_STATE_RUNNING) return; @@ -32,7 +31,11 @@ nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) OUT_RING(chan, 1); } BEGIN_RING(chan, NvSub2D, 0x0588, 1); - OUT_RING(chan, color); + if (info->fix.visual == FB_VISUAL_TRUECOLOR || + info->fix.visual == FB_VISUAL_DIRECTCOLOR) + OUT_RING(chan, ((uint32_t *)info->pseudo_palette)[rect->color]); + else + OUT_RING(chan, rect->color); BEGIN_RING(chan, NvSub2D, 0x0600, 4); OUT_RING(chan, rect->dx); OUT_RING(chan, rect->dy); From 61768bf1e694056cb41029b60e1270bf2578a83f Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 4 Jan 2010 12:53:01 +1000 Subject: [PATCH 0603/1626] drm/nouveau: remove unused nouveau_channel_idle() function Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_channel.c | 41 ----------------------- drivers/gpu/drm/nouveau/nouveau_drv.h | 1 - 2 files changed, 42 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c index 4f378b68fe7b..d1c7f8c911c7 100644 --- a/drivers/gpu/drm/nouveau/nouveau_channel.c +++ b/drivers/gpu/drm/nouveau/nouveau_channel.c @@ -235,47 +235,6 @@ nouveau_channel_alloc(struct drm_device *dev, struct nouveau_channel **chan_ret, return 0; } -int -nouveau_channel_idle(struct nouveau_channel *chan) -{ - struct drm_device *dev = chan->dev; - struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_engine *engine = &dev_priv->engine; - uint32_t caches; - int idle; - - if (!chan) { - NV_ERROR(dev, "no channel...\n"); - return 1; - } - - caches = nv_rd32(dev, NV03_PFIFO_CACHES); - nv_wr32(dev, NV03_PFIFO_CACHES, caches & ~1); - - if (engine->fifo.channel_id(dev) != chan->id) { - struct nouveau_gpuobj *ramfc = - chan->ramfc ? chan->ramfc->gpuobj : NULL; - - if (!ramfc) { - NV_ERROR(dev, "No RAMFC for channel %d\n", chan->id); - return 1; - } - - engine->instmem.prepare_access(dev, false); - if (nv_ro32(dev, ramfc, 0) != nv_ro32(dev, ramfc, 1)) - idle = 0; - else - idle = 1; - engine->instmem.finish_access(dev); - } else { - idle = (nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_GET) == - nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_PUT)); - } - - nv_wr32(dev, NV03_PFIFO_CACHES, caches); - return idle; -} - /* stops a fifo */ void nouveau_channel_free(struct nouveau_channel *chan) diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 9181eaefe918..4087a9a20ba9 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -745,7 +745,6 @@ extern int nouveau_channel_alloc(struct drm_device *dev, struct drm_file *file_priv, uint32_t fb_ctxdma, uint32_t tt_ctxdma); extern void nouveau_channel_free(struct nouveau_channel *); -extern int nouveau_channel_idle(struct nouveau_channel *chan); /* nouveau_object.c */ extern int nouveau_gpuobj_early_init(struct drm_device *); From 846975a97b098bbbf1232a01a3a5723a4bddd9e7 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 4 Jan 2010 19:25:09 +0100 Subject: [PATCH 0604/1626] drm/nouveau: create function for "dealing" with gpu lockup It's mostly a cleanup, but in nv50_fbcon_accel_init gpu lockup message was printed, but HWACCEL_DISBALED flag was not set. Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 15 +++++++++++---- drivers/gpu/drm/nouveau/nouveau_fbcon.h | 1 + drivers/gpu/drm/nouveau/nv04_fbcon.c | 15 +++++---------- drivers/gpu/drm/nouveau/nv50_fbcon.c | 17 +++++------------ 4 files changed, 22 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 44cbbeeb7745..0b05c869e0e7 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -64,8 +64,7 @@ nouveau_fbcon_sync(struct fb_info *info) return 0; if (RING_SPACE(chan, 4)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); return 0; } @@ -86,8 +85,7 @@ nouveau_fbcon_sync(struct fb_info *info) } if (ret) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); return 0; } @@ -380,3 +378,12 @@ nouveau_fbcon_remove(struct drm_device *dev, struct drm_framebuffer *fb) return 0; } + +void nouveau_fbcon_gpu_lockup(struct fb_info *info) +{ + struct nouveau_fbcon_par *par = info->par; + struct drm_device *dev = par->dev; + + NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); + info->flags |= FBINFO_HWACCEL_DISABLED; +} diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.h b/drivers/gpu/drm/nouveau/nouveau_fbcon.h index 8531140fedbc..462e0b87b4bd 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.h +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.h @@ -43,5 +43,6 @@ void nouveau_fbcon_zfill(struct drm_device *dev); int nv04_fbcon_accel_init(struct fb_info *info); int nv50_fbcon_accel_init(struct fb_info *info); +void nouveau_fbcon_gpu_lockup(struct fb_info *info); #endif /* __NV50_FBCON_H__ */ diff --git a/drivers/gpu/drm/nouveau/nv04_fbcon.c b/drivers/gpu/drm/nouveau/nv04_fbcon.c index bd08a0dc9841..d910873c1368 100644 --- a/drivers/gpu/drm/nouveau/nv04_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv04_fbcon.c @@ -39,8 +39,7 @@ nv04_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region) return; if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 4)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); } if (info->flags & FBINFO_HWACCEL_DISABLED) { @@ -67,8 +66,7 @@ nv04_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) return; if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 7)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); } if (info->flags & FBINFO_HWACCEL_DISABLED) { @@ -112,8 +110,7 @@ nv04_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) } if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 8)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); } if (info->flags & FBINFO_HWACCEL_DISABLED) { @@ -147,8 +144,7 @@ nv04_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) int iter_len = dsize > 128 ? 128 : dsize; if (RING_SPACE(chan, iter_len + 1)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); cfb_imageblit(info, image); return; } @@ -246,8 +242,7 @@ nv04_fbcon_accel_init(struct fb_info *info) return ret; if (RING_SPACE(chan, 49)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); return 0; } diff --git a/drivers/gpu/drm/nouveau/nv50_fbcon.c b/drivers/gpu/drm/nouveau/nv50_fbcon.c index cc34356ab0b5..e4f279ee61cf 100644 --- a/drivers/gpu/drm/nouveau/nv50_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv50_fbcon.c @@ -16,9 +16,7 @@ nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, rect->rop == ROP_COPY ? 7 : 11)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); } if (info->flags & FBINFO_HWACCEL_DISABLED) { @@ -60,9 +58,7 @@ nv50_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region) return; if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 12)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); } if (info->flags & FBINFO_HWACCEL_DISABLED) { @@ -105,8 +101,7 @@ nv50_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) } if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 11)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); } if (info->flags & FBINFO_HWACCEL_DISABLED) { @@ -139,9 +134,7 @@ nv50_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) int push = dwords > 2047 ? 2047 : dwords; if (RING_SPACE(chan, push + 1)) { - NV_ERROR(dev, - "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); cfb_imageblit(info, image); return; } @@ -203,7 +196,7 @@ nv50_fbcon_accel_init(struct fb_info *info) ret = RING_SPACE(chan, 59); if (ret) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); + nouveau_fbcon_gpu_lockup(info); return ret; } From 7fb8ec8e2bedc8381243cf4bdc4cfa8e657397a8 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 5 Jan 2010 09:41:05 +1000 Subject: [PATCH 0605/1626] drm/nv50: restore correct cache1 get/put address on fifoctx load Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_fifo.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nv50_fifo.c b/drivers/gpu/drm/nouveau/nv50_fifo.c index b7282284f080..39caf167587d 100644 --- a/drivers/gpu/drm/nouveau/nv50_fifo.c +++ b/drivers/gpu/drm/nouveau/nv50_fifo.c @@ -384,8 +384,8 @@ nv50_fifo_load_context(struct nouveau_channel *chan) nv_wr32(dev, NV40_PFIFO_CACHE1_DATA(ptr), nv_ro32(dev, cache, (ptr * 2) + 1)); } - nv_wr32(dev, 0x3210, cnt << 2); - nv_wr32(dev, 0x3270, 0); + nv_wr32(dev, NV03_PFIFO_CACHE1_PUT, cnt << 2); + nv_wr32(dev, NV03_PFIFO_CACHE1_GET, 0); /* guessing that all the 0x34xx regs aren't on NV50 */ if (!IS_G80) { @@ -398,8 +398,6 @@ nv50_fifo_load_context(struct nouveau_channel *chan) dev_priv->engine.instmem.finish_access(dev); - nv_wr32(dev, NV03_PFIFO_CACHE1_GET, 0); - nv_wr32(dev, NV03_PFIFO_CACHE1_PUT, 0); nv_wr32(dev, NV03_PFIFO_CACHE1_PUSH1, chan->id | (1<<16)); return 0; } From bbb8c3d8820893694a3567716adb3b6f6ba2b7d0 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 4 Jan 2010 15:52:20 +1000 Subject: [PATCH 0606/1626] drm/nouveau: have ttm's fault handler called directly There's no good reason for us to have our own anymore, this is left over from an early port to these TTM interfaces. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_ttm.c | 30 +-------------------------- 1 file changed, 1 insertion(+), 29 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_ttm.c b/drivers/gpu/drm/nouveau/nouveau_ttm.c index 187eb84e4da5..c385d50f041b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_ttm.c +++ b/drivers/gpu/drm/nouveau/nouveau_ttm.c @@ -28,45 +28,17 @@ #include "nouveau_drv.h" -static struct vm_operations_struct nouveau_ttm_vm_ops; -static const struct vm_operations_struct *ttm_vm_ops; - -static int -nouveau_ttm_fault(struct vm_area_struct *vma, struct vm_fault *vmf) -{ - struct ttm_buffer_object *bo = vma->vm_private_data; - int ret; - - if (unlikely(bo == NULL)) - return VM_FAULT_NOPAGE; - - ret = ttm_vm_ops->fault(vma, vmf); - return ret; -} - int nouveau_ttm_mmap(struct file *filp, struct vm_area_struct *vma) { struct drm_file *file_priv = filp->private_data; struct drm_nouveau_private *dev_priv = file_priv->minor->dev->dev_private; - int ret; if (unlikely(vma->vm_pgoff < DRM_FILE_PAGE_OFFSET)) return drm_mmap(filp, vma); - ret = ttm_bo_mmap(filp, vma, &dev_priv->ttm.bdev); - if (unlikely(ret != 0)) - return ret; - - if (unlikely(ttm_vm_ops == NULL)) { - ttm_vm_ops = vma->vm_ops; - nouveau_ttm_vm_ops = *ttm_vm_ops; - nouveau_ttm_vm_ops.fault = &nouveau_ttm_fault; - } - - vma->vm_ops = &nouveau_ttm_vm_ops; - return 0; + return ttm_bo_mmap(filp, vma, &dev_priv->ttm.bdev); } static int From 7978b9cfa59133a34aaad420e447c2a29d5c6152 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 6 Jan 2010 12:00:02 +1000 Subject: [PATCH 0607/1626] drm/nv50: prevent a possible ctxprog hang The below is mainly an educated guess at what's going on, docs would sure be handy... NVIDIA? :P It appears it's possible for a ctxprog to run even while a GPU exception is pending. The GF8 and up ctxprogs appear to have a small snippet of code which detects this, and stalls the ctxprog until it's been handled, which essentially looks like: if (r2 & 0x00008000) { r0 |= 0x80000000; while (r0 & 0x80000000) {} } I don't know of any way that flag would get cleared unless the driver intervenes (and indeed, in the cases I've seen the hang, nothing steps in to automagically clear it for us). This patch causes the driver to clear the flag during the PGRAPH IRQ handler. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_irq.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c index 370c72c968d1..919a619ca7fa 100644 --- a/drivers/gpu/drm/nouveau/nouveau_irq.c +++ b/drivers/gpu/drm/nouveau/nouveau_irq.c @@ -635,6 +635,7 @@ nv50_pgraph_irq_handler(struct drm_device *dev) if ((nv_rd32(dev, 0x400500) & isb) != isb) nv_wr32(dev, 0x400500, nv_rd32(dev, 0x400500) | isb); + nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) & ~(1 << 31)); } nv_wr32(dev, NV03_PMC_INTR_0, NV_PMC_INTR_0_PGRAPH_PENDING); From 234896a7671c23233230622728f6942b3d1c098e Mon Sep 17 00:00:00 2001 From: Luca Barbieri Date: Wed, 6 Jan 2010 04:02:45 +0100 Subject: [PATCH 0608/1626] drm/nouveau: Fix null deref in nouveau_fence_emit due to deleted fence Currently Nouveau will unvalidate all buffers if it is forced to wait on one, and then start revalidating from the beginning. While doing so, it destroys the operation fence, causing nouveau_fence_emit to crash. This patch fixes this bug by taking the fence object out of validate_op and creating it just before emit. The fence pointer is initialized to 0 and unref'ed unconditionally. In addition to fixing the bug, this prevents its reintroduction and simplifies the code. Signed-off-by: Luca Barbieri Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_gem.c | 33 +++++++++++---------------- 1 file changed, 13 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c index 18fd8ac9fca7..2009db2426c3 100644 --- a/drivers/gpu/drm/nouveau/nouveau_gem.c +++ b/drivers/gpu/drm/nouveau/nouveau_gem.c @@ -220,7 +220,6 @@ nouveau_gem_set_domain(struct drm_gem_object *gem, uint32_t read_domains, } struct validate_op { - struct nouveau_fence *fence; struct list_head vram_list; struct list_head gart_list; struct list_head both_list; @@ -252,17 +251,11 @@ validate_fini_list(struct list_head *list, struct nouveau_fence *fence) } static void -validate_fini(struct validate_op *op, bool success) +validate_fini(struct validate_op *op, struct nouveau_fence* fence) { - struct nouveau_fence *fence = op->fence; - - if (unlikely(!success)) - op->fence = NULL; - - validate_fini_list(&op->vram_list, op->fence); - validate_fini_list(&op->gart_list, op->fence); - validate_fini_list(&op->both_list, op->fence); - nouveau_fence_unref((void *)&fence); + validate_fini_list(&op->vram_list, fence); + validate_fini_list(&op->gart_list, fence); + validate_fini_list(&op->both_list, fence); } static int @@ -420,10 +413,6 @@ nouveau_gem_pushbuf_validate(struct nouveau_channel *chan, INIT_LIST_HEAD(&op->gart_list); INIT_LIST_HEAD(&op->both_list); - ret = nouveau_fence_new(chan, &op->fence, false); - if (ret) - return ret; - if (nr_buffers == 0) return 0; @@ -541,6 +530,7 @@ nouveau_gem_ioctl_pushbuf(struct drm_device *dev, void *data, struct drm_nouveau_gem_pushbuf_bo *bo = NULL; struct nouveau_channel *chan; struct validate_op op; + struct nouveau_fence* fence = 0; uint32_t *pushbuf = NULL; int ret = 0, do_reloc = 0, i; @@ -597,7 +587,7 @@ nouveau_gem_ioctl_pushbuf(struct drm_device *dev, void *data, OUT_RINGp(chan, pushbuf, req->nr_dwords); - ret = nouveau_fence_emit(op.fence); + ret = nouveau_fence_new(chan, &fence, true); if (ret) { NV_ERROR(dev, "error fencing pushbuf: %d\n", ret); WIND_RING(chan); @@ -605,7 +595,7 @@ nouveau_gem_ioctl_pushbuf(struct drm_device *dev, void *data, } if (nouveau_gem_pushbuf_sync(chan)) { - ret = nouveau_fence_wait(op.fence, NULL, false, false); + ret = nouveau_fence_wait(fence, NULL, false, false); if (ret) { for (i = 0; i < req->nr_dwords; i++) NV_ERROR(dev, "0x%08x\n", pushbuf[i]); @@ -614,7 +604,8 @@ nouveau_gem_ioctl_pushbuf(struct drm_device *dev, void *data, } out: - validate_fini(&op, ret == 0); + validate_fini(&op, fence); + nouveau_fence_unref((void**)&fence); mutex_unlock(&dev->struct_mutex); kfree(pushbuf); kfree(bo); @@ -634,6 +625,7 @@ nouveau_gem_ioctl_pushbuf_call(struct drm_device *dev, void *data, struct drm_gem_object *gem; struct nouveau_bo *pbbo; struct validate_op op; + struct nouveau_fence* fence = 0; int i, ret = 0, do_reloc = 0; NOUVEAU_CHECK_INITIALISED_WITH_RETURN; @@ -772,7 +764,7 @@ nouveau_gem_ioctl_pushbuf_call(struct drm_device *dev, void *data, OUT_RING(chan, 0); } - ret = nouveau_fence_emit(op.fence); + ret = nouveau_fence_new(chan, &fence, true); if (ret) { NV_ERROR(dev, "error fencing pushbuf: %d\n", ret); WIND_RING(chan); @@ -780,7 +772,8 @@ nouveau_gem_ioctl_pushbuf_call(struct drm_device *dev, void *data, } out: - validate_fini(&op, ret == 0); + validate_fini(&op, fence); + nouveau_fence_unref((void**)&fence); mutex_unlock(&dev->struct_mutex); kfree(bo); From 1dee7a930bfddd69825fca3e3f9541c8a5333876 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 7 Jan 2010 13:47:57 +1000 Subject: [PATCH 0609/1626] drm/nv04: differentiate between nv04/nv05 Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_state.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index a6b573e89829..09b9a46dfc0e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -642,7 +642,10 @@ int nouveau_load(struct drm_device *dev, unsigned long flags) dev_priv->chipset = (reg0 & 0xff00000) >> 20; /* NV04 or NV05 */ } else if ((reg0 & 0xff00fff0) == 0x20004000) { - dev_priv->chipset = 0x04; + if (reg0 & 0x00f00000) + dev_priv->chipset = 0x05; + else + dev_priv->chipset = 0x04; } else dev_priv->chipset = 0xff; From dff36321497b1130085820c81a44779b065c8d7e Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 8 Jan 2010 10:53:40 +1000 Subject: [PATCH 0610/1626] drm/nouveau: use dma.max rather than pushbuf size for checking GET validity Some upcoming G80 DMA changes will depend on this, but it's split out for bisectibility just in case it causes some unexpected issues. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.c b/drivers/gpu/drm/nouveau/nouveau_dma.c index f1fd3f2b9813..3f7f78e03d42 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dma.c +++ b/drivers/gpu/drm/nouveau/nouveau_dma.c @@ -130,7 +130,7 @@ READ_GET(struct nouveau_channel *chan, uint32_t *get) val = nvchan_rd32(chan, chan->user_get); if (val < chan->pushbuf_base || - val >= chan->pushbuf_base + chan->pushbuf_bo->bo.mem.size) { + val > chan->pushbuf_base + (chan->dma.max << 2)) { /* meaningless to dma_wait() except to know whether the * GPU has stalled or not */ From 75c99da6cdd0ec9d70747f9ced3e85b2dd955cdf Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 8 Jan 2010 10:57:39 +1000 Subject: [PATCH 0611/1626] drm/nouveau: initialise DMA tracking parameters earlier Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_channel.c | 2 ++ drivers/gpu/drm/nouveau/nouveau_dma.c | 15 +++++++++------ drivers/gpu/drm/nouveau/nouveau_drv.h | 1 + 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c index d1c7f8c911c7..343d718a9667 100644 --- a/drivers/gpu/drm/nouveau/nouveau_channel.c +++ b/drivers/gpu/drm/nouveau/nouveau_channel.c @@ -158,6 +158,8 @@ nouveau_channel_alloc(struct drm_device *dev, struct nouveau_channel **chan_ret, return ret; } + nouveau_dma_pre_init(chan); + /* Locate channel's user control regs */ if (dev_priv->card_type < NV_40) user = NV03_USER(channel); diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.c b/drivers/gpu/drm/nouveau/nouveau_dma.c index 3f7f78e03d42..7afbe8b40d51 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dma.c +++ b/drivers/gpu/drm/nouveau/nouveau_dma.c @@ -29,6 +29,15 @@ #include "nouveau_drv.h" #include "nouveau_dma.h" +void +nouveau_dma_pre_init(struct nouveau_channel *chan) +{ + chan->dma.max = (chan->pushbuf_bo->bo.mem.size >> 2) - 2; + chan->dma.put = 0; + chan->dma.cur = chan->dma.put; + chan->dma.free = chan->dma.max - chan->dma.cur; +} + int nouveau_dma_init(struct nouveau_channel *chan) { @@ -74,12 +83,6 @@ nouveau_dma_init(struct nouveau_channel *chan) return ret; } - /* Initialise DMA vars */ - chan->dma.max = (chan->pushbuf_bo->bo.mem.size >> 2) - 2; - chan->dma.put = 0; - chan->dma.cur = chan->dma.put; - chan->dma.free = chan->dma.max - chan->dma.cur; - /* Insert NOPS for NOUVEAU_DMA_SKIPS */ ret = RING_SPACE(chan, NOUVEAU_DMA_SKIPS); if (ret) diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 4087a9a20ba9..026419fe8791 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -837,6 +837,7 @@ nouveau_debugfs_channel_fini(struct nouveau_channel *chan) #endif /* nouveau_dma.c */ +extern void nouveau_dma_pre_init(struct nouveau_channel *); extern int nouveau_dma_init(struct nouveau_channel *); extern int nouveau_dma_wait(struct nouveau_channel *, int size); From fe5a64acbfab4f79ccd18972c3d4c1cae31f3b8d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marcin=20Ko=C5=9Bcielnicki?= Date: Sun, 10 Jan 2010 17:09:14 +0000 Subject: [PATCH 0612/1626] drm/nv04: Fix set_operation software method. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv04_graph.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv04_graph.c b/drivers/gpu/drm/nouveau/nv04_graph.c index 98f3b40318d4..e260986ea65a 100644 --- a/drivers/gpu/drm/nouveau/nv04_graph.c +++ b/drivers/gpu/drm/nouveau/nv04_graph.c @@ -537,7 +537,7 @@ nv04_graph_mthd_set_operation(struct nouveau_channel *chan, int grclass, int mthd, uint32_t data) { struct drm_device *dev = chan->dev; - uint32_t instance = nv_rd32(dev, NV04_PGRAPH_CTX_SWITCH4) & 0xffff; + uint32_t instance = (nv_rd32(dev, NV04_PGRAPH_CTX_SWITCH4) & 0xffff) << 4; int subc = (nv_rd32(dev, NV04_PGRAPH_TRAPPED_ADDR) >> 13) & 0x7; uint32_t tmp; From 81143d2a65364ce5ae5c97b4c10d7d9bbe4428fd Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Thu, 5 Jun 2008 13:26:28 +0200 Subject: [PATCH 0613/1626] [ARM] Kirkwood: drive USB VBUS pin on rd88f6192-nas high on boot Signed-off-by: Saeed Bishara Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/rd88f6192-nas-setup.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index 8bf4153d0840..3bf6304158f6 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -53,6 +54,11 @@ static void __init rd88f6192_init(void) */ kirkwood_init(); + orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1); + if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 || + gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0) + pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n"); + kirkwood_ehci_init(); kirkwood_ge00_init(&rd88f6192_ge00_data); kirkwood_sata_init(&rd88f6192_sata_data); From 804c7559e9376c3ba78ae15a30337b1e24f8ae80 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 8 Jan 2010 15:58:49 -0500 Subject: [PATCH 0614/1626] drm/radeon/kms: add additional safe regs for r4xx/rs6xx and r5xx - r4xx/rs6xx: add support for extended pixel shader instruction/temp regs - r5xx: add SM3 regs Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/Makefile | 5 + drivers/gpu/drm/radeon/r420.c | 9 +- drivers/gpu/drm/radeon/reg_srcs/r420 | 795 ++++++++++++++++++++++++++ drivers/gpu/drm/radeon/reg_srcs/rs600 | 68 ++- drivers/gpu/drm/radeon/reg_srcs/rv515 | 6 + 5 files changed, 881 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/radeon/reg_srcs/r420 diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile index b5f5fe75e6af..1cc7b937b1ea 100644 --- a/drivers/gpu/drm/radeon/Makefile +++ b/drivers/gpu/drm/radeon/Makefile @@ -24,6 +24,9 @@ $(obj)/rv515_reg_safe.h: $(src)/reg_srcs/rv515 $(obj)/mkregtable $(obj)/r300_reg_safe.h: $(src)/reg_srcs/r300 $(obj)/mkregtable $(call if_changed,mkregtable) +$(obj)/r420_reg_safe.h: $(src)/reg_srcs/r420 $(obj)/mkregtable + $(call if_changed,mkregtable) + $(obj)/rs600_reg_safe.h: $(src)/reg_srcs/rs600 $(obj)/mkregtable $(call if_changed,mkregtable) @@ -35,6 +38,8 @@ $(obj)/rv515.o: $(obj)/rv515_reg_safe.h $(obj)/r300.o: $(obj)/r300_reg_safe.h +$(obj)/r420.o: $(obj)/r420_reg_safe.h + $(obj)/rs600.o: $(obj)/rs600_reg_safe.h radeon-y := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o \ diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index 1d4d16ed7db1..053404e71a9d 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -32,6 +32,13 @@ #include "atom.h" #include "r100d.h" #include "r420d.h" +#include "r420_reg_safe.h" + +static void r420_set_reg_safe(struct radeon_device *rdev) +{ + rdev->config.r300.reg_safe_bm = r420_reg_safe_bm; + rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(r420_reg_safe_bm); +} int r420_mc_init(struct radeon_device *rdev) { @@ -378,7 +385,7 @@ int r420_init(struct radeon_device *rdev) if (r) return r; } - r300_set_reg_safe(rdev); + r420_set_reg_safe(rdev); rdev->accel_working = true; r = r420_startup(rdev); if (r) { diff --git a/drivers/gpu/drm/radeon/reg_srcs/r420 b/drivers/gpu/drm/radeon/reg_srcs/r420 new file mode 100644 index 000000000000..989f7a020832 --- /dev/null +++ b/drivers/gpu/drm/radeon/reg_srcs/r420 @@ -0,0 +1,795 @@ +r420 0x4f60 +0x1434 SRC_Y_X +0x1438 DST_Y_X +0x143C DST_HEIGHT_WIDTH +0x146C DP_GUI_MASTER_CNTL +0x1474 BRUSH_Y_X +0x1478 DP_BRUSH_BKGD_CLR +0x147C DP_BRUSH_FRGD_CLR +0x1480 BRUSH_DATA0 +0x1484 BRUSH_DATA1 +0x1598 DST_WIDTH_HEIGHT +0x15C0 CLR_CMP_CNTL +0x15C4 CLR_CMP_CLR_SRC +0x15C8 CLR_CMP_CLR_DST +0x15CC CLR_CMP_MSK +0x15D8 DP_SRC_FRGD_CLR +0x15DC DP_SRC_BKGD_CLR +0x1600 DST_LINE_START +0x1604 DST_LINE_END +0x1608 DST_LINE_PATCOUNT +0x16C0 DP_CNTL +0x16CC DP_WRITE_MSK +0x16D0 DP_CNTL_XDIR_YDIR_YMAJOR +0x16E8 DEFAULT_SC_BOTTOM_RIGHT +0x16EC SC_TOP_LEFT +0x16F0 SC_BOTTOM_RIGHT +0x16F4 SRC_SC_BOTTOM_RIGHT +0x1714 DSTCACHE_CTLSTAT +0x1720 WAIT_UNTIL +0x172C RBBM_GUICNTL +0x1D98 VAP_VPORT_XSCALE +0x1D9C VAP_VPORT_XOFFSET +0x1DA0 VAP_VPORT_YSCALE +0x1DA4 VAP_VPORT_YOFFSET +0x1DA8 VAP_VPORT_ZSCALE +0x1DAC VAP_VPORT_ZOFFSET +0x2080 VAP_CNTL +0x2090 VAP_OUT_VTX_FMT_0 +0x2094 VAP_OUT_VTX_FMT_1 +0x20B0 VAP_VTE_CNTL +0x2138 VAP_VF_MIN_VTX_INDX +0x2140 VAP_CNTL_STATUS +0x2150 VAP_PROG_STREAM_CNTL_0 +0x2154 VAP_PROG_STREAM_CNTL_1 +0x2158 VAP_PROG_STREAM_CNTL_2 +0x215C VAP_PROG_STREAM_CNTL_3 +0x2160 VAP_PROG_STREAM_CNTL_4 +0x2164 VAP_PROG_STREAM_CNTL_5 +0x2168 VAP_PROG_STREAM_CNTL_6 +0x216C VAP_PROG_STREAM_CNTL_7 +0x2180 VAP_VTX_STATE_CNTL +0x2184 VAP_VSM_VTX_ASSM +0x2188 VAP_VTX_STATE_IND_REG_0 +0x218C VAP_VTX_STATE_IND_REG_1 +0x2190 VAP_VTX_STATE_IND_REG_2 +0x2194 VAP_VTX_STATE_IND_REG_3 +0x2198 VAP_VTX_STATE_IND_REG_4 +0x219C VAP_VTX_STATE_IND_REG_5 +0x21A0 VAP_VTX_STATE_IND_REG_6 +0x21A4 VAP_VTX_STATE_IND_REG_7 +0x21A8 VAP_VTX_STATE_IND_REG_8 +0x21AC VAP_VTX_STATE_IND_REG_9 +0x21B0 VAP_VTX_STATE_IND_REG_10 +0x21B4 VAP_VTX_STATE_IND_REG_11 +0x21B8 VAP_VTX_STATE_IND_REG_12 +0x21BC VAP_VTX_STATE_IND_REG_13 +0x21C0 VAP_VTX_STATE_IND_REG_14 +0x21C4 VAP_VTX_STATE_IND_REG_15 +0x21DC VAP_PSC_SGN_NORM_CNTL +0x21E0 VAP_PROG_STREAM_CNTL_EXT_0 +0x21E4 VAP_PROG_STREAM_CNTL_EXT_1 +0x21E8 VAP_PROG_STREAM_CNTL_EXT_2 +0x21EC VAP_PROG_STREAM_CNTL_EXT_3 +0x21F0 VAP_PROG_STREAM_CNTL_EXT_4 +0x21F4 VAP_PROG_STREAM_CNTL_EXT_5 +0x21F8 VAP_PROG_STREAM_CNTL_EXT_6 +0x21FC VAP_PROG_STREAM_CNTL_EXT_7 +0x2200 VAP_PVS_VECTOR_INDX_REG +0x2204 VAP_PVS_VECTOR_DATA_REG +0x2208 VAP_PVS_VECTOR_DATA_REG_128 +0x221C VAP_CLIP_CNTL +0x2220 VAP_GB_VERT_CLIP_ADJ +0x2224 VAP_GB_VERT_DISC_ADJ +0x2228 VAP_GB_HORZ_CLIP_ADJ +0x222C VAP_GB_HORZ_DISC_ADJ +0x2230 VAP_PVS_FLOW_CNTL_ADDRS_0 +0x2234 VAP_PVS_FLOW_CNTL_ADDRS_1 +0x2238 VAP_PVS_FLOW_CNTL_ADDRS_2 +0x223C VAP_PVS_FLOW_CNTL_ADDRS_3 +0x2240 VAP_PVS_FLOW_CNTL_ADDRS_4 +0x2244 VAP_PVS_FLOW_CNTL_ADDRS_5 +0x2248 VAP_PVS_FLOW_CNTL_ADDRS_6 +0x224C VAP_PVS_FLOW_CNTL_ADDRS_7 +0x2250 VAP_PVS_FLOW_CNTL_ADDRS_8 +0x2254 VAP_PVS_FLOW_CNTL_ADDRS_9 +0x2258 VAP_PVS_FLOW_CNTL_ADDRS_10 +0x225C VAP_PVS_FLOW_CNTL_ADDRS_11 +0x2260 VAP_PVS_FLOW_CNTL_ADDRS_12 +0x2264 VAP_PVS_FLOW_CNTL_ADDRS_13 +0x2268 VAP_PVS_FLOW_CNTL_ADDRS_14 +0x226C VAP_PVS_FLOW_CNTL_ADDRS_15 +0x2284 VAP_PVS_STATE_FLUSH_REG +0x2288 VAP_PVS_VTX_TIMEOUT_REG +0x2290 VAP_PVS_FLOW_CNTL_LOOP_INDEX_0 +0x2294 VAP_PVS_FLOW_CNTL_LOOP_INDEX_1 +0x2298 VAP_PVS_FLOW_CNTL_LOOP_INDEX_2 +0x229C VAP_PVS_FLOW_CNTL_LOOP_INDEX_3 +0x22A0 VAP_PVS_FLOW_CNTL_LOOP_INDEX_4 +0x22A4 VAP_PVS_FLOW_CNTL_LOOP_INDEX_5 +0x22A8 VAP_PVS_FLOW_CNTL_LOOP_INDEX_6 +0x22AC VAP_PVS_FLOW_CNTL_LOOP_INDEX_7 +0x22B0 VAP_PVS_FLOW_CNTL_LOOP_INDEX_8 +0x22B4 VAP_PVS_FLOW_CNTL_LOOP_INDEX_9 +0x22B8 VAP_PVS_FLOW_CNTL_LOOP_INDEX_10 +0x22BC VAP_PVS_FLOW_CNTL_LOOP_INDEX_11 +0x22C0 VAP_PVS_FLOW_CNTL_LOOP_INDEX_12 +0x22C4 VAP_PVS_FLOW_CNTL_LOOP_INDEX_13 +0x22C8 VAP_PVS_FLOW_CNTL_LOOP_INDEX_14 +0x22CC VAP_PVS_FLOW_CNTL_LOOP_INDEX_15 +0x22D0 VAP_PVS_CODE_CNTL_0 +0x22D4 VAP_PVS_CONST_CNTL +0x22D8 VAP_PVS_CODE_CNTL_1 +0x22DC VAP_PVS_FLOW_CNTL_OPC +0x342C RB2D_DSTCACHE_CTLSTAT +0x4000 GB_VAP_RASTER_VTX_FMT_0 +0x4004 GB_VAP_RASTER_VTX_FMT_1 +0x4008 GB_ENABLE +0x401C GB_SELECT +0x4020 GB_AA_CONFIG +0x4024 GB_FIFO_SIZE +0x4100 TX_INVALTAGS +0x4200 GA_POINT_S0 +0x4204 GA_POINT_T0 +0x4208 GA_POINT_S1 +0x420C GA_POINT_T1 +0x4214 GA_TRIANGLE_STIPPLE +0x421C GA_POINT_SIZE +0x4230 GA_POINT_MINMAX +0x4234 GA_LINE_CNTL +0x4238 GA_LINE_STIPPLE_CONFIG +0x4260 GA_LINE_STIPPLE_VALUE +0x4264 GA_LINE_S0 +0x4268 GA_LINE_S1 +0x4278 GA_COLOR_CONTROL +0x427C GA_SOLID_RG +0x4280 GA_SOLID_BA +0x4288 GA_POLY_MODE +0x428C GA_ROUND_MODE +0x4290 GA_OFFSET +0x4294 GA_FOG_SCALE +0x4298 GA_FOG_OFFSET +0x42A0 SU_TEX_WRAP +0x42A4 SU_POLY_OFFSET_FRONT_SCALE +0x42A8 SU_POLY_OFFSET_FRONT_OFFSET +0x42AC SU_POLY_OFFSET_BACK_SCALE +0x42B0 SU_POLY_OFFSET_BACK_OFFSET +0x42B4 SU_POLY_OFFSET_ENABLE +0x42B8 SU_CULL_MODE +0x42C0 SU_DEPTH_SCALE +0x42C4 SU_DEPTH_OFFSET +0x42C8 SU_REG_DEST +0x4300 RS_COUNT +0x4304 RS_INST_COUNT +0x4310 RS_IP_0 +0x4314 RS_IP_1 +0x4318 RS_IP_2 +0x431C RS_IP_3 +0x4320 RS_IP_4 +0x4324 RS_IP_5 +0x4328 RS_IP_6 +0x432C RS_IP_7 +0x4330 RS_INST_0 +0x4334 RS_INST_1 +0x4338 RS_INST_2 +0x433C RS_INST_3 +0x4340 RS_INST_4 +0x4344 RS_INST_5 +0x4348 RS_INST_6 +0x434C RS_INST_7 +0x4350 RS_INST_8 +0x4354 RS_INST_9 +0x4358 RS_INST_10 +0x435C RS_INST_11 +0x4360 RS_INST_12 +0x4364 RS_INST_13 +0x4368 RS_INST_14 +0x436C RS_INST_15 +0x43A4 SC_HYPERZ_EN +0x43A8 SC_EDGERULE +0x43B0 SC_CLIP_0_A +0x43B4 SC_CLIP_0_B +0x43B8 SC_CLIP_1_A +0x43BC SC_CLIP_1_B +0x43C0 SC_CLIP_2_A +0x43C4 SC_CLIP_2_B +0x43C8 SC_CLIP_3_A +0x43CC SC_CLIP_3_B +0x43D0 SC_CLIP_RULE +0x43E0 SC_SCISSOR0 +0x43E8 SC_SCREENDOOR +0x4440 TX_FILTER1_0 +0x4444 TX_FILTER1_1 +0x4448 TX_FILTER1_2 +0x444C TX_FILTER1_3 +0x4450 TX_FILTER1_4 +0x4454 TX_FILTER1_5 +0x4458 TX_FILTER1_6 +0x445C TX_FILTER1_7 +0x4460 TX_FILTER1_8 +0x4464 TX_FILTER1_9 +0x4468 TX_FILTER1_10 +0x446C TX_FILTER1_11 +0x4470 TX_FILTER1_12 +0x4474 TX_FILTER1_13 +0x4478 TX_FILTER1_14 +0x447C TX_FILTER1_15 +0x4580 TX_CHROMA_KEY_0 +0x4584 TX_CHROMA_KEY_1 +0x4588 TX_CHROMA_KEY_2 +0x458C TX_CHROMA_KEY_3 +0x4590 TX_CHROMA_KEY_4 +0x4594 TX_CHROMA_KEY_5 +0x4598 TX_CHROMA_KEY_6 +0x459C TX_CHROMA_KEY_7 +0x45A0 TX_CHROMA_KEY_8 +0x45A4 TX_CHROMA_KEY_9 +0x45A8 TX_CHROMA_KEY_10 +0x45AC TX_CHROMA_KEY_11 +0x45B0 TX_CHROMA_KEY_12 +0x45B4 TX_CHROMA_KEY_13 +0x45B8 TX_CHROMA_KEY_14 +0x45BC TX_CHROMA_KEY_15 +0x45C0 TX_BORDER_COLOR_0 +0x45C4 TX_BORDER_COLOR_1 +0x45C8 TX_BORDER_COLOR_2 +0x45CC TX_BORDER_COLOR_3 +0x45D0 TX_BORDER_COLOR_4 +0x45D4 TX_BORDER_COLOR_5 +0x45D8 TX_BORDER_COLOR_6 +0x45DC TX_BORDER_COLOR_7 +0x45E0 TX_BORDER_COLOR_8 +0x45E4 TX_BORDER_COLOR_9 +0x45E8 TX_BORDER_COLOR_10 +0x45EC TX_BORDER_COLOR_11 +0x45F0 TX_BORDER_COLOR_12 +0x45F4 TX_BORDER_COLOR_13 +0x45F8 TX_BORDER_COLOR_14 +0x45FC TX_BORDER_COLOR_15 +0x4600 US_CONFIG +0x4604 US_PIXSIZE +0x4608 US_CODE_OFFSET +0x460C US_RESET +0x4610 US_CODE_ADDR_0 +0x4614 US_CODE_ADDR_1 +0x4618 US_CODE_ADDR_2 +0x461C US_CODE_ADDR_3 +0x4620 US_TEX_INST_0 +0x4624 US_TEX_INST_1 +0x4628 US_TEX_INST_2 +0x462C US_TEX_INST_3 +0x4630 US_TEX_INST_4 +0x4634 US_TEX_INST_5 +0x4638 US_TEX_INST_6 +0x463C US_TEX_INST_7 +0x4640 US_TEX_INST_8 +0x4644 US_TEX_INST_9 +0x4648 US_TEX_INST_10 +0x464C US_TEX_INST_11 +0x4650 US_TEX_INST_12 +0x4654 US_TEX_INST_13 +0x4658 US_TEX_INST_14 +0x465C US_TEX_INST_15 +0x4660 US_TEX_INST_16 +0x4664 US_TEX_INST_17 +0x4668 US_TEX_INST_18 +0x466C US_TEX_INST_19 +0x4670 US_TEX_INST_20 +0x4674 US_TEX_INST_21 +0x4678 US_TEX_INST_22 +0x467C US_TEX_INST_23 +0x4680 US_TEX_INST_24 +0x4684 US_TEX_INST_25 +0x4688 US_TEX_INST_26 +0x468C US_TEX_INST_27 +0x4690 US_TEX_INST_28 +0x4694 US_TEX_INST_29 +0x4698 US_TEX_INST_30 +0x469C US_TEX_INST_31 +0x46A4 US_OUT_FMT_0 +0x46A8 US_OUT_FMT_1 +0x46AC US_OUT_FMT_2 +0x46B0 US_OUT_FMT_3 +0x46B4 US_W_FMT +0x46B8 US_CODE_BANK +0x46BC US_CODE_EXT +0x46C0 US_ALU_RGB_ADDR_0 +0x46C4 US_ALU_RGB_ADDR_1 +0x46C8 US_ALU_RGB_ADDR_2 +0x46CC US_ALU_RGB_ADDR_3 +0x46D0 US_ALU_RGB_ADDR_4 +0x46D4 US_ALU_RGB_ADDR_5 +0x46D8 US_ALU_RGB_ADDR_6 +0x46DC US_ALU_RGB_ADDR_7 +0x46E0 US_ALU_RGB_ADDR_8 +0x46E4 US_ALU_RGB_ADDR_9 +0x46E8 US_ALU_RGB_ADDR_10 +0x46EC US_ALU_RGB_ADDR_11 +0x46F0 US_ALU_RGB_ADDR_12 +0x46F4 US_ALU_RGB_ADDR_13 +0x46F8 US_ALU_RGB_ADDR_14 +0x46FC US_ALU_RGB_ADDR_15 +0x4700 US_ALU_RGB_ADDR_16 +0x4704 US_ALU_RGB_ADDR_17 +0x4708 US_ALU_RGB_ADDR_18 +0x470C US_ALU_RGB_ADDR_19 +0x4710 US_ALU_RGB_ADDR_20 +0x4714 US_ALU_RGB_ADDR_21 +0x4718 US_ALU_RGB_ADDR_22 +0x471C US_ALU_RGB_ADDR_23 +0x4720 US_ALU_RGB_ADDR_24 +0x4724 US_ALU_RGB_ADDR_25 +0x4728 US_ALU_RGB_ADDR_26 +0x472C US_ALU_RGB_ADDR_27 +0x4730 US_ALU_RGB_ADDR_28 +0x4734 US_ALU_RGB_ADDR_29 +0x4738 US_ALU_RGB_ADDR_30 +0x473C US_ALU_RGB_ADDR_31 +0x4740 US_ALU_RGB_ADDR_32 +0x4744 US_ALU_RGB_ADDR_33 +0x4748 US_ALU_RGB_ADDR_34 +0x474C US_ALU_RGB_ADDR_35 +0x4750 US_ALU_RGB_ADDR_36 +0x4754 US_ALU_RGB_ADDR_37 +0x4758 US_ALU_RGB_ADDR_38 +0x475C US_ALU_RGB_ADDR_39 +0x4760 US_ALU_RGB_ADDR_40 +0x4764 US_ALU_RGB_ADDR_41 +0x4768 US_ALU_RGB_ADDR_42 +0x476C US_ALU_RGB_ADDR_43 +0x4770 US_ALU_RGB_ADDR_44 +0x4774 US_ALU_RGB_ADDR_45 +0x4778 US_ALU_RGB_ADDR_46 +0x477C US_ALU_RGB_ADDR_47 +0x4780 US_ALU_RGB_ADDR_48 +0x4784 US_ALU_RGB_ADDR_49 +0x4788 US_ALU_RGB_ADDR_50 +0x478C US_ALU_RGB_ADDR_51 +0x4790 US_ALU_RGB_ADDR_52 +0x4794 US_ALU_RGB_ADDR_53 +0x4798 US_ALU_RGB_ADDR_54 +0x479C US_ALU_RGB_ADDR_55 +0x47A0 US_ALU_RGB_ADDR_56 +0x47A4 US_ALU_RGB_ADDR_57 +0x47A8 US_ALU_RGB_ADDR_58 +0x47AC US_ALU_RGB_ADDR_59 +0x47B0 US_ALU_RGB_ADDR_60 +0x47B4 US_ALU_RGB_ADDR_61 +0x47B8 US_ALU_RGB_ADDR_62 +0x47BC US_ALU_RGB_ADDR_63 +0x47C0 US_ALU_ALPHA_ADDR_0 +0x47C4 US_ALU_ALPHA_ADDR_1 +0x47C8 US_ALU_ALPHA_ADDR_2 +0x47CC US_ALU_ALPHA_ADDR_3 +0x47D0 US_ALU_ALPHA_ADDR_4 +0x47D4 US_ALU_ALPHA_ADDR_5 +0x47D8 US_ALU_ALPHA_ADDR_6 +0x47DC US_ALU_ALPHA_ADDR_7 +0x47E0 US_ALU_ALPHA_ADDR_8 +0x47E4 US_ALU_ALPHA_ADDR_9 +0x47E8 US_ALU_ALPHA_ADDR_10 +0x47EC US_ALU_ALPHA_ADDR_11 +0x47F0 US_ALU_ALPHA_ADDR_12 +0x47F4 US_ALU_ALPHA_ADDR_13 +0x47F8 US_ALU_ALPHA_ADDR_14 +0x47FC US_ALU_ALPHA_ADDR_15 +0x4800 US_ALU_ALPHA_ADDR_16 +0x4804 US_ALU_ALPHA_ADDR_17 +0x4808 US_ALU_ALPHA_ADDR_18 +0x480C US_ALU_ALPHA_ADDR_19 +0x4810 US_ALU_ALPHA_ADDR_20 +0x4814 US_ALU_ALPHA_ADDR_21 +0x4818 US_ALU_ALPHA_ADDR_22 +0x481C US_ALU_ALPHA_ADDR_23 +0x4820 US_ALU_ALPHA_ADDR_24 +0x4824 US_ALU_ALPHA_ADDR_25 +0x4828 US_ALU_ALPHA_ADDR_26 +0x482C US_ALU_ALPHA_ADDR_27 +0x4830 US_ALU_ALPHA_ADDR_28 +0x4834 US_ALU_ALPHA_ADDR_29 +0x4838 US_ALU_ALPHA_ADDR_30 +0x483C US_ALU_ALPHA_ADDR_31 +0x4840 US_ALU_ALPHA_ADDR_32 +0x4844 US_ALU_ALPHA_ADDR_33 +0x4848 US_ALU_ALPHA_ADDR_34 +0x484C US_ALU_ALPHA_ADDR_35 +0x4850 US_ALU_ALPHA_ADDR_36 +0x4854 US_ALU_ALPHA_ADDR_37 +0x4858 US_ALU_ALPHA_ADDR_38 +0x485C US_ALU_ALPHA_ADDR_39 +0x4860 US_ALU_ALPHA_ADDR_40 +0x4864 US_ALU_ALPHA_ADDR_41 +0x4868 US_ALU_ALPHA_ADDR_42 +0x486C US_ALU_ALPHA_ADDR_43 +0x4870 US_ALU_ALPHA_ADDR_44 +0x4874 US_ALU_ALPHA_ADDR_45 +0x4878 US_ALU_ALPHA_ADDR_46 +0x487C US_ALU_ALPHA_ADDR_47 +0x4880 US_ALU_ALPHA_ADDR_48 +0x4884 US_ALU_ALPHA_ADDR_49 +0x4888 US_ALU_ALPHA_ADDR_50 +0x488C US_ALU_ALPHA_ADDR_51 +0x4890 US_ALU_ALPHA_ADDR_52 +0x4894 US_ALU_ALPHA_ADDR_53 +0x4898 US_ALU_ALPHA_ADDR_54 +0x489C US_ALU_ALPHA_ADDR_55 +0x48A0 US_ALU_ALPHA_ADDR_56 +0x48A4 US_ALU_ALPHA_ADDR_57 +0x48A8 US_ALU_ALPHA_ADDR_58 +0x48AC US_ALU_ALPHA_ADDR_59 +0x48B0 US_ALU_ALPHA_ADDR_60 +0x48B4 US_ALU_ALPHA_ADDR_61 +0x48B8 US_ALU_ALPHA_ADDR_62 +0x48BC US_ALU_ALPHA_ADDR_63 +0x48C0 US_ALU_RGB_INST_0 +0x48C4 US_ALU_RGB_INST_1 +0x48C8 US_ALU_RGB_INST_2 +0x48CC US_ALU_RGB_INST_3 +0x48D0 US_ALU_RGB_INST_4 +0x48D4 US_ALU_RGB_INST_5 +0x48D8 US_ALU_RGB_INST_6 +0x48DC US_ALU_RGB_INST_7 +0x48E0 US_ALU_RGB_INST_8 +0x48E4 US_ALU_RGB_INST_9 +0x48E8 US_ALU_RGB_INST_10 +0x48EC US_ALU_RGB_INST_11 +0x48F0 US_ALU_RGB_INST_12 +0x48F4 US_ALU_RGB_INST_13 +0x48F8 US_ALU_RGB_INST_14 +0x48FC US_ALU_RGB_INST_15 +0x4900 US_ALU_RGB_INST_16 +0x4904 US_ALU_RGB_INST_17 +0x4908 US_ALU_RGB_INST_18 +0x490C US_ALU_RGB_INST_19 +0x4910 US_ALU_RGB_INST_20 +0x4914 US_ALU_RGB_INST_21 +0x4918 US_ALU_RGB_INST_22 +0x491C US_ALU_RGB_INST_23 +0x4920 US_ALU_RGB_INST_24 +0x4924 US_ALU_RGB_INST_25 +0x4928 US_ALU_RGB_INST_26 +0x492C US_ALU_RGB_INST_27 +0x4930 US_ALU_RGB_INST_28 +0x4934 US_ALU_RGB_INST_29 +0x4938 US_ALU_RGB_INST_30 +0x493C US_ALU_RGB_INST_31 +0x4940 US_ALU_RGB_INST_32 +0x4944 US_ALU_RGB_INST_33 +0x4948 US_ALU_RGB_INST_34 +0x494C US_ALU_RGB_INST_35 +0x4950 US_ALU_RGB_INST_36 +0x4954 US_ALU_RGB_INST_37 +0x4958 US_ALU_RGB_INST_38 +0x495C US_ALU_RGB_INST_39 +0x4960 US_ALU_RGB_INST_40 +0x4964 US_ALU_RGB_INST_41 +0x4968 US_ALU_RGB_INST_42 +0x496C US_ALU_RGB_INST_43 +0x4970 US_ALU_RGB_INST_44 +0x4974 US_ALU_RGB_INST_45 +0x4978 US_ALU_RGB_INST_46 +0x497C US_ALU_RGB_INST_47 +0x4980 US_ALU_RGB_INST_48 +0x4984 US_ALU_RGB_INST_49 +0x4988 US_ALU_RGB_INST_50 +0x498C US_ALU_RGB_INST_51 +0x4990 US_ALU_RGB_INST_52 +0x4994 US_ALU_RGB_INST_53 +0x4998 US_ALU_RGB_INST_54 +0x499C US_ALU_RGB_INST_55 +0x49A0 US_ALU_RGB_INST_56 +0x49A4 US_ALU_RGB_INST_57 +0x49A8 US_ALU_RGB_INST_58 +0x49AC US_ALU_RGB_INST_59 +0x49B0 US_ALU_RGB_INST_60 +0x49B4 US_ALU_RGB_INST_61 +0x49B8 US_ALU_RGB_INST_62 +0x49BC US_ALU_RGB_INST_63 +0x49C0 US_ALU_ALPHA_INST_0 +0x49C4 US_ALU_ALPHA_INST_1 +0x49C8 US_ALU_ALPHA_INST_2 +0x49CC US_ALU_ALPHA_INST_3 +0x49D0 US_ALU_ALPHA_INST_4 +0x49D4 US_ALU_ALPHA_INST_5 +0x49D8 US_ALU_ALPHA_INST_6 +0x49DC US_ALU_ALPHA_INST_7 +0x49E0 US_ALU_ALPHA_INST_8 +0x49E4 US_ALU_ALPHA_INST_9 +0x49E8 US_ALU_ALPHA_INST_10 +0x49EC US_ALU_ALPHA_INST_11 +0x49F0 US_ALU_ALPHA_INST_12 +0x49F4 US_ALU_ALPHA_INST_13 +0x49F8 US_ALU_ALPHA_INST_14 +0x49FC US_ALU_ALPHA_INST_15 +0x4A00 US_ALU_ALPHA_INST_16 +0x4A04 US_ALU_ALPHA_INST_17 +0x4A08 US_ALU_ALPHA_INST_18 +0x4A0C US_ALU_ALPHA_INST_19 +0x4A10 US_ALU_ALPHA_INST_20 +0x4A14 US_ALU_ALPHA_INST_21 +0x4A18 US_ALU_ALPHA_INST_22 +0x4A1C US_ALU_ALPHA_INST_23 +0x4A20 US_ALU_ALPHA_INST_24 +0x4A24 US_ALU_ALPHA_INST_25 +0x4A28 US_ALU_ALPHA_INST_26 +0x4A2C US_ALU_ALPHA_INST_27 +0x4A30 US_ALU_ALPHA_INST_28 +0x4A34 US_ALU_ALPHA_INST_29 +0x4A38 US_ALU_ALPHA_INST_30 +0x4A3C US_ALU_ALPHA_INST_31 +0x4A40 US_ALU_ALPHA_INST_32 +0x4A44 US_ALU_ALPHA_INST_33 +0x4A48 US_ALU_ALPHA_INST_34 +0x4A4C US_ALU_ALPHA_INST_35 +0x4A50 US_ALU_ALPHA_INST_36 +0x4A54 US_ALU_ALPHA_INST_37 +0x4A58 US_ALU_ALPHA_INST_38 +0x4A5C US_ALU_ALPHA_INST_39 +0x4A60 US_ALU_ALPHA_INST_40 +0x4A64 US_ALU_ALPHA_INST_41 +0x4A68 US_ALU_ALPHA_INST_42 +0x4A6C US_ALU_ALPHA_INST_43 +0x4A70 US_ALU_ALPHA_INST_44 +0x4A74 US_ALU_ALPHA_INST_45 +0x4A78 US_ALU_ALPHA_INST_46 +0x4A7C US_ALU_ALPHA_INST_47 +0x4A80 US_ALU_ALPHA_INST_48 +0x4A84 US_ALU_ALPHA_INST_49 +0x4A88 US_ALU_ALPHA_INST_50 +0x4A8C US_ALU_ALPHA_INST_51 +0x4A90 US_ALU_ALPHA_INST_52 +0x4A94 US_ALU_ALPHA_INST_53 +0x4A98 US_ALU_ALPHA_INST_54 +0x4A9C US_ALU_ALPHA_INST_55 +0x4AA0 US_ALU_ALPHA_INST_56 +0x4AA4 US_ALU_ALPHA_INST_57 +0x4AA8 US_ALU_ALPHA_INST_58 +0x4AAC US_ALU_ALPHA_INST_59 +0x4AB0 US_ALU_ALPHA_INST_60 +0x4AB4 US_ALU_ALPHA_INST_61 +0x4AB8 US_ALU_ALPHA_INST_62 +0x4ABC US_ALU_ALPHA_INST_63 +0x4AC0 US_ALU_EXT_ADDR_0 +0x4AC4 US_ALU_EXT_ADDR_1 +0x4AC8 US_ALU_EXT_ADDR_2 +0x4ACC US_ALU_EXT_ADDR_3 +0x4AD0 US_ALU_EXT_ADDR_4 +0x4AD4 US_ALU_EXT_ADDR_5 +0x4AD8 US_ALU_EXT_ADDR_6 +0x4ADC US_ALU_EXT_ADDR_7 +0x4AE0 US_ALU_EXT_ADDR_8 +0x4AE4 US_ALU_EXT_ADDR_9 +0x4AE8 US_ALU_EXT_ADDR_10 +0x4AEC US_ALU_EXT_ADDR_11 +0x4AF0 US_ALU_EXT_ADDR_12 +0x4AF4 US_ALU_EXT_ADDR_13 +0x4AF8 US_ALU_EXT_ADDR_14 +0x4AFC US_ALU_EXT_ADDR_15 +0x4B00 US_ALU_EXT_ADDR_16 +0x4B04 US_ALU_EXT_ADDR_17 +0x4B08 US_ALU_EXT_ADDR_18 +0x4B0C US_ALU_EXT_ADDR_19 +0x4B10 US_ALU_EXT_ADDR_20 +0x4B14 US_ALU_EXT_ADDR_21 +0x4B18 US_ALU_EXT_ADDR_22 +0x4B1C US_ALU_EXT_ADDR_23 +0x4B20 US_ALU_EXT_ADDR_24 +0x4B24 US_ALU_EXT_ADDR_25 +0x4B28 US_ALU_EXT_ADDR_26 +0x4B2C US_ALU_EXT_ADDR_27 +0x4B30 US_ALU_EXT_ADDR_28 +0x4B34 US_ALU_EXT_ADDR_29 +0x4B38 US_ALU_EXT_ADDR_30 +0x4B3C US_ALU_EXT_ADDR_31 +0x4B40 US_ALU_EXT_ADDR_32 +0x4B44 US_ALU_EXT_ADDR_33 +0x4B48 US_ALU_EXT_ADDR_34 +0x4B4C US_ALU_EXT_ADDR_35 +0x4B50 US_ALU_EXT_ADDR_36 +0x4B54 US_ALU_EXT_ADDR_37 +0x4B58 US_ALU_EXT_ADDR_38 +0x4B5C US_ALU_EXT_ADDR_39 +0x4B60 US_ALU_EXT_ADDR_40 +0x4B64 US_ALU_EXT_ADDR_41 +0x4B68 US_ALU_EXT_ADDR_42 +0x4B6C US_ALU_EXT_ADDR_43 +0x4B70 US_ALU_EXT_ADDR_44 +0x4B74 US_ALU_EXT_ADDR_45 +0x4B78 US_ALU_EXT_ADDR_46 +0x4B7C US_ALU_EXT_ADDR_47 +0x4B80 US_ALU_EXT_ADDR_48 +0x4B84 US_ALU_EXT_ADDR_49 +0x4B88 US_ALU_EXT_ADDR_50 +0x4B8C US_ALU_EXT_ADDR_51 +0x4B90 US_ALU_EXT_ADDR_52 +0x4B94 US_ALU_EXT_ADDR_53 +0x4B98 US_ALU_EXT_ADDR_54 +0x4B9C US_ALU_EXT_ADDR_55 +0x4BA0 US_ALU_EXT_ADDR_56 +0x4BA4 US_ALU_EXT_ADDR_57 +0x4BA8 US_ALU_EXT_ADDR_58 +0x4BAC US_ALU_EXT_ADDR_59 +0x4BB0 US_ALU_EXT_ADDR_60 +0x4BB4 US_ALU_EXT_ADDR_61 +0x4BB8 US_ALU_EXT_ADDR_62 +0x4BBC US_ALU_EXT_ADDR_63 +0x4BC0 FG_FOG_BLEND +0x4BC4 FG_FOG_FACTOR +0x4BC8 FG_FOG_COLOR_R +0x4BCC FG_FOG_COLOR_G +0x4BD0 FG_FOG_COLOR_B +0x4BD4 FG_ALPHA_FUNC +0x4BD8 FG_DEPTH_SRC +0x4C00 US_ALU_CONST_R_0 +0x4C04 US_ALU_CONST_G_0 +0x4C08 US_ALU_CONST_B_0 +0x4C0C US_ALU_CONST_A_0 +0x4C10 US_ALU_CONST_R_1 +0x4C14 US_ALU_CONST_G_1 +0x4C18 US_ALU_CONST_B_1 +0x4C1C US_ALU_CONST_A_1 +0x4C20 US_ALU_CONST_R_2 +0x4C24 US_ALU_CONST_G_2 +0x4C28 US_ALU_CONST_B_2 +0x4C2C US_ALU_CONST_A_2 +0x4C30 US_ALU_CONST_R_3 +0x4C34 US_ALU_CONST_G_3 +0x4C38 US_ALU_CONST_B_3 +0x4C3C US_ALU_CONST_A_3 +0x4C40 US_ALU_CONST_R_4 +0x4C44 US_ALU_CONST_G_4 +0x4C48 US_ALU_CONST_B_4 +0x4C4C US_ALU_CONST_A_4 +0x4C50 US_ALU_CONST_R_5 +0x4C54 US_ALU_CONST_G_5 +0x4C58 US_ALU_CONST_B_5 +0x4C5C US_ALU_CONST_A_5 +0x4C60 US_ALU_CONST_R_6 +0x4C64 US_ALU_CONST_G_6 +0x4C68 US_ALU_CONST_B_6 +0x4C6C US_ALU_CONST_A_6 +0x4C70 US_ALU_CONST_R_7 +0x4C74 US_ALU_CONST_G_7 +0x4C78 US_ALU_CONST_B_7 +0x4C7C US_ALU_CONST_A_7 +0x4C80 US_ALU_CONST_R_8 +0x4C84 US_ALU_CONST_G_8 +0x4C88 US_ALU_CONST_B_8 +0x4C8C US_ALU_CONST_A_8 +0x4C90 US_ALU_CONST_R_9 +0x4C94 US_ALU_CONST_G_9 +0x4C98 US_ALU_CONST_B_9 +0x4C9C US_ALU_CONST_A_9 +0x4CA0 US_ALU_CONST_R_10 +0x4CA4 US_ALU_CONST_G_10 +0x4CA8 US_ALU_CONST_B_10 +0x4CAC US_ALU_CONST_A_10 +0x4CB0 US_ALU_CONST_R_11 +0x4CB4 US_ALU_CONST_G_11 +0x4CB8 US_ALU_CONST_B_11 +0x4CBC US_ALU_CONST_A_11 +0x4CC0 US_ALU_CONST_R_12 +0x4CC4 US_ALU_CONST_G_12 +0x4CC8 US_ALU_CONST_B_12 +0x4CCC US_ALU_CONST_A_12 +0x4CD0 US_ALU_CONST_R_13 +0x4CD4 US_ALU_CONST_G_13 +0x4CD8 US_ALU_CONST_B_13 +0x4CDC US_ALU_CONST_A_13 +0x4CE0 US_ALU_CONST_R_14 +0x4CE4 US_ALU_CONST_G_14 +0x4CE8 US_ALU_CONST_B_14 +0x4CEC US_ALU_CONST_A_14 +0x4CF0 US_ALU_CONST_R_15 +0x4CF4 US_ALU_CONST_G_15 +0x4CF8 US_ALU_CONST_B_15 +0x4CFC US_ALU_CONST_A_15 +0x4D00 US_ALU_CONST_R_16 +0x4D04 US_ALU_CONST_G_16 +0x4D08 US_ALU_CONST_B_16 +0x4D0C US_ALU_CONST_A_16 +0x4D10 US_ALU_CONST_R_17 +0x4D14 US_ALU_CONST_G_17 +0x4D18 US_ALU_CONST_B_17 +0x4D1C US_ALU_CONST_A_17 +0x4D20 US_ALU_CONST_R_18 +0x4D24 US_ALU_CONST_G_18 +0x4D28 US_ALU_CONST_B_18 +0x4D2C US_ALU_CONST_A_18 +0x4D30 US_ALU_CONST_R_19 +0x4D34 US_ALU_CONST_G_19 +0x4D38 US_ALU_CONST_B_19 +0x4D3C US_ALU_CONST_A_19 +0x4D40 US_ALU_CONST_R_20 +0x4D44 US_ALU_CONST_G_20 +0x4D48 US_ALU_CONST_B_20 +0x4D4C US_ALU_CONST_A_20 +0x4D50 US_ALU_CONST_R_21 +0x4D54 US_ALU_CONST_G_21 +0x4D58 US_ALU_CONST_B_21 +0x4D5C US_ALU_CONST_A_21 +0x4D60 US_ALU_CONST_R_22 +0x4D64 US_ALU_CONST_G_22 +0x4D68 US_ALU_CONST_B_22 +0x4D6C US_ALU_CONST_A_22 +0x4D70 US_ALU_CONST_R_23 +0x4D74 US_ALU_CONST_G_23 +0x4D78 US_ALU_CONST_B_23 +0x4D7C US_ALU_CONST_A_23 +0x4D80 US_ALU_CONST_R_24 +0x4D84 US_ALU_CONST_G_24 +0x4D88 US_ALU_CONST_B_24 +0x4D8C US_ALU_CONST_A_24 +0x4D90 US_ALU_CONST_R_25 +0x4D94 US_ALU_CONST_G_25 +0x4D98 US_ALU_CONST_B_25 +0x4D9C US_ALU_CONST_A_25 +0x4DA0 US_ALU_CONST_R_26 +0x4DA4 US_ALU_CONST_G_26 +0x4DA8 US_ALU_CONST_B_26 +0x4DAC US_ALU_CONST_A_26 +0x4DB0 US_ALU_CONST_R_27 +0x4DB4 US_ALU_CONST_G_27 +0x4DB8 US_ALU_CONST_B_27 +0x4DBC US_ALU_CONST_A_27 +0x4DC0 US_ALU_CONST_R_28 +0x4DC4 US_ALU_CONST_G_28 +0x4DC8 US_ALU_CONST_B_28 +0x4DCC US_ALU_CONST_A_28 +0x4DD0 US_ALU_CONST_R_29 +0x4DD4 US_ALU_CONST_G_29 +0x4DD8 US_ALU_CONST_B_29 +0x4DDC US_ALU_CONST_A_29 +0x4DE0 US_ALU_CONST_R_30 +0x4DE4 US_ALU_CONST_G_30 +0x4DE8 US_ALU_CONST_B_30 +0x4DEC US_ALU_CONST_A_30 +0x4DF0 US_ALU_CONST_R_31 +0x4DF4 US_ALU_CONST_G_31 +0x4DF8 US_ALU_CONST_B_31 +0x4DFC US_ALU_CONST_A_31 +0x4E04 RB3D_BLENDCNTL_R3 +0x4E08 RB3D_ABLENDCNTL_R3 +0x4E0C RB3D_COLOR_CHANNEL_MASK +0x4E10 RB3D_CONSTANT_COLOR +0x4E14 RB3D_COLOR_CLEAR_VALUE +0x4E18 RB3D_ROPCNTL_R3 +0x4E1C RB3D_CLRCMP_FLIPE_R3 +0x4E20 RB3D_CLRCMP_CLR_R3 +0x4E24 RB3D_CLRCMP_MSK_R3 +0x4E48 RB3D_DEBUG_CTL +0x4E4C RB3D_DSTCACHE_CTLSTAT_R3 +0x4E50 RB3D_DITHER_CTL +0x4E54 RB3D_CMASK_OFFSET0 +0x4E58 RB3D_CMASK_OFFSET1 +0x4E5C RB3D_CMASK_OFFSET2 +0x4E60 RB3D_CMASK_OFFSET3 +0x4E64 RB3D_CMASK_PITCH0 +0x4E68 RB3D_CMASK_PITCH1 +0x4E6C RB3D_CMASK_PITCH2 +0x4E70 RB3D_CMASK_PITCH3 +0x4E74 RB3D_CMASK_WRINDEX +0x4E78 RB3D_CMASK_DWORD +0x4E7C RB3D_CMASK_RDINDEX +0x4E80 RB3D_AARESOLVE_OFFSET +0x4E84 RB3D_AARESOLVE_PITCH +0x4E88 RB3D_AARESOLVE_CTL +0x4EA0 RB3D_DISCARD_SRC_PIXEL_LTE_THRESHOLD +0x4EA4 RB3D_DISCARD_SRC_PIXEL_GTE_THRESHOLD +0x4F04 ZB_ZSTENCILCNTL +0x4F08 ZB_STENCILREFMASK +0x4F14 ZB_ZTOP +0x4F18 ZB_ZCACHE_CTLSTAT +0x4F1C ZB_BW_CNTL +0x4F28 ZB_DEPTHCLEARVALUE +0x4F30 ZB_ZMASK_OFFSET +0x4F34 ZB_ZMASK_PITCH +0x4F38 ZB_ZMASK_WRINDEX +0x4F3C ZB_ZMASK_DWORD +0x4F40 ZB_ZMASK_RDINDEX +0x4F44 ZB_HIZ_OFFSET +0x4F48 ZB_HIZ_WRINDEX +0x4F4C ZB_HIZ_DWORD +0x4F50 ZB_HIZ_RDINDEX +0x4F54 ZB_HIZ_PITCH +0x4F58 ZB_ZPASS_DATA diff --git a/drivers/gpu/drm/radeon/reg_srcs/rs600 b/drivers/gpu/drm/radeon/reg_srcs/rs600 index 8e3c0b807add..6801b865d1c4 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/rs600 +++ b/drivers/gpu/drm/radeon/reg_srcs/rs600 @@ -153,7 +153,7 @@ rs600 0x6d40 0x42A4 SU_POLY_OFFSET_FRONT_SCALE 0x42A8 SU_POLY_OFFSET_FRONT_OFFSET 0x42AC SU_POLY_OFFSET_BACK_SCALE -0x42B0 SU_POLY_OFFSET_BACK_OFFSET +0x42B0 SU_POLY_OFFSET_BACK_OFFSET 0x42B4 SU_POLY_OFFSET_ENABLE 0x42B8 SU_CULL_MODE 0x42C0 SU_DEPTH_SCALE @@ -291,6 +291,8 @@ rs600 0x6d40 0x46AC US_OUT_FMT_2 0x46B0 US_OUT_FMT_3 0x46B4 US_W_FMT +0x46B8 US_CODE_BANK +0x46BC US_CODE_EXT 0x46C0 US_ALU_RGB_ADDR_0 0x46C4 US_ALU_RGB_ADDR_1 0x46C8 US_ALU_RGB_ADDR_2 @@ -547,6 +549,70 @@ rs600 0x6d40 0x4AB4 US_ALU_ALPHA_INST_61 0x4AB8 US_ALU_ALPHA_INST_62 0x4ABC US_ALU_ALPHA_INST_63 +0x4AC0 US_ALU_EXT_ADDR_0 +0x4AC4 US_ALU_EXT_ADDR_1 +0x4AC8 US_ALU_EXT_ADDR_2 +0x4ACC US_ALU_EXT_ADDR_3 +0x4AD0 US_ALU_EXT_ADDR_4 +0x4AD4 US_ALU_EXT_ADDR_5 +0x4AD8 US_ALU_EXT_ADDR_6 +0x4ADC US_ALU_EXT_ADDR_7 +0x4AE0 US_ALU_EXT_ADDR_8 +0x4AE4 US_ALU_EXT_ADDR_9 +0x4AE8 US_ALU_EXT_ADDR_10 +0x4AEC US_ALU_EXT_ADDR_11 +0x4AF0 US_ALU_EXT_ADDR_12 +0x4AF4 US_ALU_EXT_ADDR_13 +0x4AF8 US_ALU_EXT_ADDR_14 +0x4AFC US_ALU_EXT_ADDR_15 +0x4B00 US_ALU_EXT_ADDR_16 +0x4B04 US_ALU_EXT_ADDR_17 +0x4B08 US_ALU_EXT_ADDR_18 +0x4B0C US_ALU_EXT_ADDR_19 +0x4B10 US_ALU_EXT_ADDR_20 +0x4B14 US_ALU_EXT_ADDR_21 +0x4B18 US_ALU_EXT_ADDR_22 +0x4B1C US_ALU_EXT_ADDR_23 +0x4B20 US_ALU_EXT_ADDR_24 +0x4B24 US_ALU_EXT_ADDR_25 +0x4B28 US_ALU_EXT_ADDR_26 +0x4B2C US_ALU_EXT_ADDR_27 +0x4B30 US_ALU_EXT_ADDR_28 +0x4B34 US_ALU_EXT_ADDR_29 +0x4B38 US_ALU_EXT_ADDR_30 +0x4B3C US_ALU_EXT_ADDR_31 +0x4B40 US_ALU_EXT_ADDR_32 +0x4B44 US_ALU_EXT_ADDR_33 +0x4B48 US_ALU_EXT_ADDR_34 +0x4B4C US_ALU_EXT_ADDR_35 +0x4B50 US_ALU_EXT_ADDR_36 +0x4B54 US_ALU_EXT_ADDR_37 +0x4B58 US_ALU_EXT_ADDR_38 +0x4B5C US_ALU_EXT_ADDR_39 +0x4B60 US_ALU_EXT_ADDR_40 +0x4B64 US_ALU_EXT_ADDR_41 +0x4B68 US_ALU_EXT_ADDR_42 +0x4B6C US_ALU_EXT_ADDR_43 +0x4B70 US_ALU_EXT_ADDR_44 +0x4B74 US_ALU_EXT_ADDR_45 +0x4B78 US_ALU_EXT_ADDR_46 +0x4B7C US_ALU_EXT_ADDR_47 +0x4B80 US_ALU_EXT_ADDR_48 +0x4B84 US_ALU_EXT_ADDR_49 +0x4B88 US_ALU_EXT_ADDR_50 +0x4B8C US_ALU_EXT_ADDR_51 +0x4B90 US_ALU_EXT_ADDR_52 +0x4B94 US_ALU_EXT_ADDR_53 +0x4B98 US_ALU_EXT_ADDR_54 +0x4B9C US_ALU_EXT_ADDR_55 +0x4BA0 US_ALU_EXT_ADDR_56 +0x4BA4 US_ALU_EXT_ADDR_57 +0x4BA8 US_ALU_EXT_ADDR_58 +0x4BAC US_ALU_EXT_ADDR_59 +0x4BB0 US_ALU_EXT_ADDR_60 +0x4BB4 US_ALU_EXT_ADDR_61 +0x4BB8 US_ALU_EXT_ADDR_62 +0x4BBC US_ALU_EXT_ADDR_63 0x4BC0 FG_FOG_BLEND 0x4BC4 FG_FOG_FACTOR 0x4BC8 FG_FOG_COLOR_R diff --git a/drivers/gpu/drm/radeon/reg_srcs/rv515 b/drivers/gpu/drm/radeon/reg_srcs/rv515 index 0102a0d5735c..38abf63bf2cd 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/rv515 +++ b/drivers/gpu/drm/radeon/reg_srcs/rv515 @@ -161,7 +161,12 @@ rv515 0x6d40 0x401C GB_SELECT 0x4020 GB_AA_CONFIG 0x4024 GB_FIFO_SIZE +0x4028 GB_Z_PEQ_CONFIG 0x4100 TX_INVALTAGS +0x4114 SU_TEX_WRAP_PS3 +0x4118 PS3_ENABLE +0x411c PS3_VTX_FMT +0x4120 PS3_TEX_SOURCE 0x4200 GA_POINT_S0 0x4204 GA_POINT_T0 0x4208 GA_POINT_S1 @@ -171,6 +176,7 @@ rv515 0x6d40 0x4230 GA_POINT_MINMAX 0x4234 GA_LINE_CNTL 0x4238 GA_LINE_STIPPLE_CONFIG +0x4258 GA_COLOR_CONTROL_PS3 0x4260 GA_LINE_STIPPLE_VALUE 0x4264 GA_LINE_S0 0x4268 GA_LINE_S1 From 89347bb8ef2d0af1ae8d847b7df91e9f04eccf2a Mon Sep 17 00:00:00 2001 From: David John Date: Thu, 31 Dec 2009 12:00:46 +0530 Subject: [PATCH 0615/1626] drm: Keep disabled outputs disabled after suspend / resume With the current DRM code, an output that has been powered off from userspace will automatically power back on when resuming from suspend. This patch fixes this behaviour. Tested only with the Intel i915 driver on an Intel GM45 Express chipset. Signed-off-by: David John Reviewed-by: Jesse Barnes Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 4231d6db72ec..aba79c494587 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -216,7 +216,7 @@ bool drm_helper_crtc_in_use(struct drm_crtc *crtc) EXPORT_SYMBOL(drm_helper_crtc_in_use); /** - * drm_disable_unused_functions - disable unused objects + * drm_helper_disable_unused_functions - disable unused objects * @dev: DRM device * * LOCKING: @@ -1162,6 +1162,9 @@ EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct); int drm_helper_resume_force_mode(struct drm_device *dev) { struct drm_crtc *crtc; + struct drm_encoder *encoder; + struct drm_encoder_helper_funcs *encoder_funcs; + struct drm_crtc_helper_funcs *crtc_funcs; int ret; list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { @@ -1174,6 +1177,25 @@ int drm_helper_resume_force_mode(struct drm_device *dev) if (ret == false) DRM_ERROR("failed to set mode on crtc %p\n", crtc); + + /* Turn off outputs that were already powered off */ + if (drm_helper_choose_crtc_dpms(crtc)) { + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + + if(encoder->crtc != crtc) + continue; + + encoder_funcs = encoder->helper_private; + if (encoder_funcs->dpms) + (*encoder_funcs->dpms) (encoder, + drm_helper_choose_encoder_dpms(encoder)); + + crtc_funcs = crtc->helper_private; + if (crtc_funcs->dpms) + (*crtc_funcs->dpms) (crtc, + drm_helper_choose_crtc_dpms(crtc)); + } + } } /* disable the unused connectors while restoring the modesetting */ drm_helper_disable_unused_functions(dev); From 509c7d83c3b18a50a0bd02afa43c8ee3c7605bc9 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 8 Jan 2010 09:27:08 +1000 Subject: [PATCH 0616/1626] drm/kms/fb: check for depth changes from userspace for resizing. If userspace (plymouth in this case) asks for a deeper depth, refuse it as well due to lack of resizing. This fixes an issue since < 32MB cards went to 8bpp and plymouth crashes on startup. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 100ee48760b7..1c2b7d44ec05 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -606,11 +606,10 @@ int drm_fb_helper_check_var(struct fb_var_screeninfo *var, return -EINVAL; /* Need to resize the fb object !!! */ - if (var->xres > fb->width || var->yres > fb->height) { - DRM_ERROR("Requested width/height is greater than current fb " - "object %dx%d > %dx%d\n", var->xres, var->yres, - fb->width, fb->height); - DRM_ERROR("Need resizing code.\n"); + if (var->bits_per_pixel > fb->bits_per_pixel || var->xres > fb->width || var->yres > fb->height) { + DRM_DEBUG("fb userspace requested width/height/bpp is greater than current fb " + "object %dx%d-%d > %dx%d-%d\n", var->xres, var->yres, var->bits_per_pixel, + fb->width, fb->height, fb->bits_per_pixel); return -EINVAL; } From 94fd163d86b049842856864cdeac318131ec576d Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 11 Jan 2010 14:20:55 +1000 Subject: [PATCH 0617/1626] drm: reduce WARN_ON to a printk. Lots of ppl keep thinking this is an oops, it was just a warning for me to see, just make it a printk now. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index aba79c494587..077313f0d47f 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -1032,7 +1032,7 @@ bool drm_helper_initial_config(struct drm_device *dev) /* * we shouldn't end up with no modes here. */ - WARN(!count, "No connectors reported connected with modes\n"); + printk(KERN_INFO "No connectors reported conncted with modes\n"); drm_setup_crtcs(dev); From 617e234b01757698ed5f8c9a5fbf12717b76e371 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sun, 13 Dec 2009 20:07:42 +0100 Subject: [PATCH 0618/1626] drm/nouveau: Add cache_flush/pull fifo engine functions. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_drv.h | 4 +++ drivers/gpu/drm/nouveau/nouveau_state.c | 10 ++++++++ drivers/gpu/drm/nouveau/nv04_fifo.c | 34 +++++++++++++++++++++++++ 3 files changed, 48 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 5f8cbb79c499..48d0ad9434a8 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -292,6 +292,8 @@ struct nouveau_fifo_engine { void (*disable)(struct drm_device *); void (*enable)(struct drm_device *); bool (*reassign)(struct drm_device *, bool enable); + bool (*cache_flush)(struct drm_device *dev); + bool (*cache_pull)(struct drm_device *dev, bool enable); int (*channel_id)(struct drm_device *); @@ -889,6 +891,8 @@ extern int nv04_fifo_init(struct drm_device *); extern void nv04_fifo_disable(struct drm_device *); extern void nv04_fifo_enable(struct drm_device *); extern bool nv04_fifo_reassign(struct drm_device *, bool); +extern bool nv04_fifo_cache_flush(struct drm_device *); +extern bool nv04_fifo_cache_pull(struct drm_device *, bool); extern int nv04_fifo_channel_id(struct drm_device *); extern int nv04_fifo_create_context(struct nouveau_channel *); extern void nv04_fifo_destroy_context(struct nouveau_channel *); diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index e76ec2d207a9..9f988431f34c 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -76,6 +76,8 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->fifo.disable = nv04_fifo_disable; engine->fifo.enable = nv04_fifo_enable; engine->fifo.reassign = nv04_fifo_reassign; + engine->fifo.cache_flush = nv04_fifo_cache_flush; + engine->fifo.cache_pull = nv04_fifo_cache_pull; engine->fifo.channel_id = nv04_fifo_channel_id; engine->fifo.create_context = nv04_fifo_create_context; engine->fifo.destroy_context = nv04_fifo_destroy_context; @@ -115,6 +117,8 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->fifo.disable = nv04_fifo_disable; engine->fifo.enable = nv04_fifo_enable; engine->fifo.reassign = nv04_fifo_reassign; + engine->fifo.cache_flush = nv04_fifo_cache_flush; + engine->fifo.cache_pull = nv04_fifo_cache_pull; engine->fifo.channel_id = nv10_fifo_channel_id; engine->fifo.create_context = nv10_fifo_create_context; engine->fifo.destroy_context = nv10_fifo_destroy_context; @@ -154,6 +158,8 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->fifo.disable = nv04_fifo_disable; engine->fifo.enable = nv04_fifo_enable; engine->fifo.reassign = nv04_fifo_reassign; + engine->fifo.cache_flush = nv04_fifo_cache_flush; + engine->fifo.cache_pull = nv04_fifo_cache_pull; engine->fifo.channel_id = nv10_fifo_channel_id; engine->fifo.create_context = nv10_fifo_create_context; engine->fifo.destroy_context = nv10_fifo_destroy_context; @@ -193,6 +199,8 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->fifo.disable = nv04_fifo_disable; engine->fifo.enable = nv04_fifo_enable; engine->fifo.reassign = nv04_fifo_reassign; + engine->fifo.cache_flush = nv04_fifo_cache_flush; + engine->fifo.cache_pull = nv04_fifo_cache_pull; engine->fifo.channel_id = nv10_fifo_channel_id; engine->fifo.create_context = nv10_fifo_create_context; engine->fifo.destroy_context = nv10_fifo_destroy_context; @@ -233,6 +241,8 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->fifo.disable = nv04_fifo_disable; engine->fifo.enable = nv04_fifo_enable; engine->fifo.reassign = nv04_fifo_reassign; + engine->fifo.cache_flush = nv04_fifo_cache_flush; + engine->fifo.cache_pull = nv04_fifo_cache_pull; engine->fifo.channel_id = nv10_fifo_channel_id; engine->fifo.create_context = nv40_fifo_create_context; engine->fifo.destroy_context = nv40_fifo_destroy_context; diff --git a/drivers/gpu/drm/nouveau/nv04_fifo.c b/drivers/gpu/drm/nouveau/nv04_fifo.c index 0c3cd53c7313..f31347b8c9b0 100644 --- a/drivers/gpu/drm/nouveau/nv04_fifo.c +++ b/drivers/gpu/drm/nouveau/nv04_fifo.c @@ -71,6 +71,40 @@ nv04_fifo_reassign(struct drm_device *dev, bool enable) return (reassign == 1); } +bool +nv04_fifo_cache_flush(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_timer_engine *ptimer = &dev_priv->engine.timer; + uint64_t start = ptimer->read(dev); + + do { + if (nv_rd32(dev, NV03_PFIFO_CACHE1_GET) == + nv_rd32(dev, NV03_PFIFO_CACHE1_PUT)) + return true; + + } while (ptimer->read(dev) - start < 100000000); + + NV_ERROR(dev, "Timeout flushing the PFIFO cache.\n"); + + return false; +} + +bool +nv04_fifo_cache_pull(struct drm_device *dev, bool enable) +{ + uint32_t pull = nv_rd32(dev, NV04_PFIFO_CACHE1_PULL0); + + if (enable) { + nv_wr32(dev, NV04_PFIFO_CACHE1_PULL0, pull | 1); + } else { + nv_wr32(dev, NV04_PFIFO_CACHE1_PULL0, pull & ~1); + nv_wr32(dev, NV04_PFIFO_CACHE1_HASH, 0); + } + + return !!(pull & 1); +} + int nv04_fifo_channel_id(struct drm_device *dev) { From 0d87c100312ce75d9bb75a456d8a542e84a1722f Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Wed, 16 Dec 2009 12:12:27 +0100 Subject: [PATCH 0619/1626] drm/nouveau: Pre-G80 tiling support. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_drv.h | 18 ++++ drivers/gpu/drm/nouveau/nouveau_reg.h | 16 ++-- drivers/gpu/drm/nouveau/nouveau_state.c | 8 ++ drivers/gpu/drm/nouveau/nv10_fb.c | 32 +++++-- drivers/gpu/drm/nouveau/nv10_graph.c | 28 +++--- drivers/gpu/drm/nouveau/nv20_graph.c | 61 ++++++------- drivers/gpu/drm/nouveau/nv40_fb.c | 53 +++++++---- drivers/gpu/drm/nouveau/nv40_graph.c | 116 ++++++++++-------------- 8 files changed, 185 insertions(+), 147 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 48d0ad9434a8..446a92ad2eef 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -277,8 +277,13 @@ struct nouveau_timer_engine { }; struct nouveau_fb_engine { + int num_tiles; + int (*init)(struct drm_device *dev); void (*takedown)(struct drm_device *dev); + + void (*set_region_tiling)(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch); }; struct nouveau_fifo_engine { @@ -332,6 +337,9 @@ struct nouveau_pgraph_engine { void (*destroy_context)(struct nouveau_channel *); int (*load_context)(struct nouveau_channel *); int (*unload_context)(struct drm_device *); + + void (*set_region_tiling)(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch); }; struct nouveau_engine { @@ -881,10 +889,14 @@ extern void nv04_fb_takedown(struct drm_device *); /* nv10_fb.c */ extern int nv10_fb_init(struct drm_device *); extern void nv10_fb_takedown(struct drm_device *); +extern void nv10_fb_set_region_tiling(struct drm_device *, int, uint32_t, + uint32_t, uint32_t); /* nv40_fb.c */ extern int nv40_fb_init(struct drm_device *); extern void nv40_fb_takedown(struct drm_device *); +extern void nv40_fb_set_region_tiling(struct drm_device *, int, uint32_t, + uint32_t, uint32_t); /* nv04_fifo.c */ extern int nv04_fifo_init(struct drm_device *); @@ -945,6 +957,8 @@ extern void nv10_graph_destroy_context(struct nouveau_channel *); extern int nv10_graph_load_context(struct nouveau_channel *); extern int nv10_graph_unload_context(struct drm_device *); extern void nv10_graph_context_switch(struct drm_device *); +extern void nv10_graph_set_region_tiling(struct drm_device *, int, uint32_t, + uint32_t, uint32_t); /* nv20_graph.c */ extern struct nouveau_pgraph_object_class nv20_graph_grclass[]; @@ -956,6 +970,8 @@ extern int nv20_graph_unload_context(struct drm_device *); extern int nv20_graph_init(struct drm_device *); extern void nv20_graph_takedown(struct drm_device *); extern int nv30_graph_init(struct drm_device *); +extern void nv20_graph_set_region_tiling(struct drm_device *, int, uint32_t, + uint32_t, uint32_t); /* nv40_graph.c */ extern struct nouveau_pgraph_object_class nv40_graph_grclass[]; @@ -967,6 +983,8 @@ extern void nv40_graph_destroy_context(struct nouveau_channel *); extern int nv40_graph_load_context(struct nouveau_channel *); extern int nv40_graph_unload_context(struct drm_device *); extern void nv40_grctx_init(struct nouveau_grctx *); +extern void nv40_graph_set_region_tiling(struct drm_device *, int, uint32_t, + uint32_t, uint32_t); /* nv50_graph.c */ extern struct nouveau_pgraph_object_class nv50_graph_grclass[]; diff --git a/drivers/gpu/drm/nouveau/nouveau_reg.h b/drivers/gpu/drm/nouveau/nouveau_reg.h index fa1b0e7165b9..251f1b3b38b9 100644 --- a/drivers/gpu/drm/nouveau/nouveau_reg.h +++ b/drivers/gpu/drm/nouveau/nouveau_reg.h @@ -349,19 +349,19 @@ #define NV04_PGRAPH_BLEND 0x00400824 #define NV04_PGRAPH_STORED_FMT 0x00400830 #define NV04_PGRAPH_PATT_COLORRAM 0x00400900 -#define NV40_PGRAPH_TILE0(i) (0x00400900 + (i*16)) -#define NV40_PGRAPH_TLIMIT0(i) (0x00400904 + (i*16)) -#define NV40_PGRAPH_TSIZE0(i) (0x00400908 + (i*16)) -#define NV40_PGRAPH_TSTATUS0(i) (0x0040090C + (i*16)) +#define NV20_PGRAPH_TILE(i) (0x00400900 + (i*16)) +#define NV20_PGRAPH_TLIMIT(i) (0x00400904 + (i*16)) +#define NV20_PGRAPH_TSIZE(i) (0x00400908 + (i*16)) +#define NV20_PGRAPH_TSTATUS(i) (0x0040090C + (i*16)) #define NV10_PGRAPH_TILE(i) (0x00400B00 + (i*16)) #define NV10_PGRAPH_TLIMIT(i) (0x00400B04 + (i*16)) #define NV10_PGRAPH_TSIZE(i) (0x00400B08 + (i*16)) #define NV10_PGRAPH_TSTATUS(i) (0x00400B0C + (i*16)) #define NV04_PGRAPH_U_RAM 0x00400D00 -#define NV47_PGRAPH_TILE0(i) (0x00400D00 + (i*16)) -#define NV47_PGRAPH_TLIMIT0(i) (0x00400D04 + (i*16)) -#define NV47_PGRAPH_TSIZE0(i) (0x00400D08 + (i*16)) -#define NV47_PGRAPH_TSTATUS0(i) (0x00400D0C + (i*16)) +#define NV47_PGRAPH_TILE(i) (0x00400D00 + (i*16)) +#define NV47_PGRAPH_TLIMIT(i) (0x00400D04 + (i*16)) +#define NV47_PGRAPH_TSIZE(i) (0x00400D08 + (i*16)) +#define NV47_PGRAPH_TSTATUS(i) (0x00400D0C + (i*16)) #define NV04_PGRAPH_V_RAM 0x00400D40 #define NV04_PGRAPH_W_RAM 0x00400D80 #define NV10_PGRAPH_COMBINER0_IN_ALPHA 0x00400E40 diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 9f988431f34c..6a459139910f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -102,6 +102,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->timer.takedown = nv04_timer_takedown; engine->fb.init = nv10_fb_init; engine->fb.takedown = nv10_fb_takedown; + engine->fb.set_region_tiling = nv10_fb_set_region_tiling; engine->graph.grclass = nv10_graph_grclass; engine->graph.init = nv10_graph_init; engine->graph.takedown = nv10_graph_takedown; @@ -111,6 +112,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->graph.fifo_access = nv04_graph_fifo_access; engine->graph.load_context = nv10_graph_load_context; engine->graph.unload_context = nv10_graph_unload_context; + engine->graph.set_region_tiling = nv10_graph_set_region_tiling; engine->fifo.channels = 32; engine->fifo.init = nv10_fifo_init; engine->fifo.takedown = nouveau_stub_takedown; @@ -143,6 +145,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->timer.takedown = nv04_timer_takedown; engine->fb.init = nv10_fb_init; engine->fb.takedown = nv10_fb_takedown; + engine->fb.set_region_tiling = nv10_fb_set_region_tiling; engine->graph.grclass = nv20_graph_grclass; engine->graph.init = nv20_graph_init; engine->graph.takedown = nv20_graph_takedown; @@ -152,6 +155,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->graph.fifo_access = nv04_graph_fifo_access; engine->graph.load_context = nv20_graph_load_context; engine->graph.unload_context = nv20_graph_unload_context; + engine->graph.set_region_tiling = nv20_graph_set_region_tiling; engine->fifo.channels = 32; engine->fifo.init = nv10_fifo_init; engine->fifo.takedown = nouveau_stub_takedown; @@ -184,6 +188,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->timer.takedown = nv04_timer_takedown; engine->fb.init = nv10_fb_init; engine->fb.takedown = nv10_fb_takedown; + engine->fb.set_region_tiling = nv10_fb_set_region_tiling; engine->graph.grclass = nv30_graph_grclass; engine->graph.init = nv30_graph_init; engine->graph.takedown = nv20_graph_takedown; @@ -193,6 +198,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->graph.destroy_context = nv20_graph_destroy_context; engine->graph.load_context = nv20_graph_load_context; engine->graph.unload_context = nv20_graph_unload_context; + engine->graph.set_region_tiling = nv20_graph_set_region_tiling; engine->fifo.channels = 32; engine->fifo.init = nv10_fifo_init; engine->fifo.takedown = nouveau_stub_takedown; @@ -226,6 +232,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->timer.takedown = nv04_timer_takedown; engine->fb.init = nv40_fb_init; engine->fb.takedown = nv40_fb_takedown; + engine->fb.set_region_tiling = nv40_fb_set_region_tiling; engine->graph.grclass = nv40_graph_grclass; engine->graph.init = nv40_graph_init; engine->graph.takedown = nv40_graph_takedown; @@ -235,6 +242,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->graph.destroy_context = nv40_graph_destroy_context; engine->graph.load_context = nv40_graph_load_context; engine->graph.unload_context = nv40_graph_unload_context; + engine->graph.set_region_tiling = nv40_graph_set_region_tiling; engine->fifo.channels = 32; engine->fifo.init = nv40_fifo_init; engine->fifo.takedown = nouveau_stub_takedown; diff --git a/drivers/gpu/drm/nouveau/nv10_fb.c b/drivers/gpu/drm/nouveau/nv10_fb.c index 79e2d104d70a..cc5cda44e501 100644 --- a/drivers/gpu/drm/nouveau/nv10_fb.c +++ b/drivers/gpu/drm/nouveau/nv10_fb.c @@ -3,17 +3,37 @@ #include "nouveau_drv.h" #include "nouveau_drm.h" +void +nv10_fb_set_region_tiling(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + uint32_t limit = max(1u, addr + size) - 1; + + if (pitch) { + if (dev_priv->card_type >= NV_20) + addr |= 1; + else + addr |= 1 << 31; + } + + nv_wr32(dev, NV10_PFB_TLIMIT(i), limit); + nv_wr32(dev, NV10_PFB_TSIZE(i), pitch); + nv_wr32(dev, NV10_PFB_TILE(i), addr); +} + int nv10_fb_init(struct drm_device *dev) { - uint32_t fb_bar_size; + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_fb_engine *pfb = &dev_priv->engine.fb; int i; - fb_bar_size = drm_get_resource_len(dev, 0) - 1; - for (i = 0; i < NV10_PFB_TILE__SIZE; i++) { - nv_wr32(dev, NV10_PFB_TILE(i), 0); - nv_wr32(dev, NV10_PFB_TLIMIT(i), fb_bar_size); - } + pfb->num_tiles = NV10_PFB_TILE__SIZE; + + /* Turn all the tiling regions off. */ + for (i = 0; i < pfb->num_tiles; i++) + pfb->set_region_tiling(dev, i, 0, 0, 0); return 0; } diff --git a/drivers/gpu/drm/nouveau/nv10_graph.c b/drivers/gpu/drm/nouveau/nv10_graph.c index 6870e0ee2e7e..fcf2cdd19493 100644 --- a/drivers/gpu/drm/nouveau/nv10_graph.c +++ b/drivers/gpu/drm/nouveau/nv10_graph.c @@ -807,6 +807,20 @@ void nv10_graph_destroy_context(struct nouveau_channel *chan) chan->pgraph_ctx = NULL; } +void +nv10_graph_set_region_tiling(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch) +{ + uint32_t limit = max(1u, addr + size) - 1; + + if (pitch) + addr |= 1 << 31; + + nv_wr32(dev, NV10_PGRAPH_TLIMIT(i), limit); + nv_wr32(dev, NV10_PGRAPH_TSIZE(i), pitch); + nv_wr32(dev, NV10_PGRAPH_TILE(i), addr); +} + int nv10_graph_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; @@ -838,17 +852,9 @@ int nv10_graph_init(struct drm_device *dev) } else nv_wr32(dev, NV10_PGRAPH_DEBUG_4, 0x00000000); - /* copy tile info from PFB */ - for (i = 0; i < NV10_PFB_TILE__SIZE; i++) { - nv_wr32(dev, NV10_PGRAPH_TILE(i), - nv_rd32(dev, NV10_PFB_TILE(i))); - nv_wr32(dev, NV10_PGRAPH_TLIMIT(i), - nv_rd32(dev, NV10_PFB_TLIMIT(i))); - nv_wr32(dev, NV10_PGRAPH_TSIZE(i), - nv_rd32(dev, NV10_PFB_TSIZE(i))); - nv_wr32(dev, NV10_PGRAPH_TSTATUS(i), - nv_rd32(dev, NV10_PFB_TSTATUS(i))); - } + /* Turn all the tiling regions off. */ + for (i = 0; i < NV10_PFB_TILE__SIZE; i++) + nv10_graph_set_region_tiling(dev, i, 0, 0, 0); nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH1, 0x00000000); nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH2, 0x00000000); diff --git a/drivers/gpu/drm/nouveau/nv20_graph.c b/drivers/gpu/drm/nouveau/nv20_graph.c index 18ba74f19703..d6fc0a82f03d 100644 --- a/drivers/gpu/drm/nouveau/nv20_graph.c +++ b/drivers/gpu/drm/nouveau/nv20_graph.c @@ -514,6 +514,27 @@ nv20_graph_rdi(struct drm_device *dev) nouveau_wait_for_idle(dev); } +void +nv20_graph_set_region_tiling(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch) +{ + uint32_t limit = max(1u, addr + size) - 1; + + if (pitch) + addr |= 1; + + nv_wr32(dev, NV20_PGRAPH_TLIMIT(i), limit); + nv_wr32(dev, NV20_PGRAPH_TSIZE(i), pitch); + nv_wr32(dev, NV20_PGRAPH_TILE(i), addr); + + nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0030 + 4 * i); + nv_wr32(dev, NV10_PGRAPH_RDI_DATA, limit); + nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0050 + 4 * i); + nv_wr32(dev, NV10_PGRAPH_RDI_DATA, pitch); + nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0010 + 4 * i); + nv_wr32(dev, NV10_PGRAPH_RDI_DATA, addr); +} + int nv20_graph_init(struct drm_device *dev) { @@ -572,27 +593,10 @@ nv20_graph_init(struct drm_device *dev) nv_wr32(dev, NV10_PGRAPH_RDI_DATA , 0x00000030); } - /* copy tile info from PFB */ - for (i = 0; i < NV10_PFB_TILE__SIZE; i++) { - nv_wr32(dev, 0x00400904 + i * 0x10, - nv_rd32(dev, NV10_PFB_TLIMIT(i))); - /* which is NV40_PGRAPH_TLIMIT0(i) ?? */ - nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0030 + i * 4); - nv_wr32(dev, NV10_PGRAPH_RDI_DATA, - nv_rd32(dev, NV10_PFB_TLIMIT(i))); - nv_wr32(dev, 0x00400908 + i * 0x10, - nv_rd32(dev, NV10_PFB_TSIZE(i))); - /* which is NV40_PGRAPH_TSIZE0(i) ?? */ - nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0050 + i * 4); - nv_wr32(dev, NV10_PGRAPH_RDI_DATA, - nv_rd32(dev, NV10_PFB_TSIZE(i))); - nv_wr32(dev, 0x00400900 + i * 0x10, - nv_rd32(dev, NV10_PFB_TILE(i))); - /* which is NV40_PGRAPH_TILE0(i) ?? */ - nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0010 + i * 4); - nv_wr32(dev, NV10_PGRAPH_RDI_DATA, - nv_rd32(dev, NV10_PFB_TILE(i))); - } + /* Turn all the tiling regions off. */ + for (i = 0; i < NV10_PFB_TILE__SIZE; i++) + nv20_graph_set_region_tiling(dev, i, 0, 0, 0); + for (i = 0; i < 8; i++) { nv_wr32(dev, 0x400980 + i * 4, nv_rd32(dev, 0x100300 + i * 4)); nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0090 + i * 4); @@ -704,18 +708,9 @@ nv30_graph_init(struct drm_device *dev) nv_wr32(dev, 0x4000c0, 0x00000016); - /* copy tile info from PFB */ - for (i = 0; i < NV10_PFB_TILE__SIZE; i++) { - nv_wr32(dev, 0x00400904 + i * 0x10, - nv_rd32(dev, NV10_PFB_TLIMIT(i))); - /* which is NV40_PGRAPH_TLIMIT0(i) ?? */ - nv_wr32(dev, 0x00400908 + i * 0x10, - nv_rd32(dev, NV10_PFB_TSIZE(i))); - /* which is NV40_PGRAPH_TSIZE0(i) ?? */ - nv_wr32(dev, 0x00400900 + i * 0x10, - nv_rd32(dev, NV10_PFB_TILE(i))); - /* which is NV40_PGRAPH_TILE0(i) ?? */ - } + /* Turn all the tiling regions off. */ + for (i = 0; i < NV10_PFB_TILE__SIZE; i++) + nv20_graph_set_region_tiling(dev, i, 0, 0, 0); nv_wr32(dev, NV10_PGRAPH_CTX_CONTROL, 0x10000100); nv_wr32(dev, NV10_PGRAPH_STATE , 0xFFFFFFFF); diff --git a/drivers/gpu/drm/nouveau/nv40_fb.c b/drivers/gpu/drm/nouveau/nv40_fb.c index ca1d27107a8e..3cd07d8d5bd7 100644 --- a/drivers/gpu/drm/nouveau/nv40_fb.c +++ b/drivers/gpu/drm/nouveau/nv40_fb.c @@ -3,12 +3,37 @@ #include "nouveau_drv.h" #include "nouveau_drm.h" +void +nv40_fb_set_region_tiling(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + uint32_t limit = max(1u, addr + size) - 1; + + if (pitch) + addr |= 1; + + switch (dev_priv->chipset) { + case 0x40: + nv_wr32(dev, NV10_PFB_TLIMIT(i), limit); + nv_wr32(dev, NV10_PFB_TSIZE(i), pitch); + nv_wr32(dev, NV10_PFB_TILE(i), addr); + break; + + default: + nv_wr32(dev, NV40_PFB_TLIMIT(i), limit); + nv_wr32(dev, NV40_PFB_TSIZE(i), pitch); + nv_wr32(dev, NV40_PFB_TILE(i), addr); + break; + } +} + int nv40_fb_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; - uint32_t fb_bar_size, tmp; - int num_tiles; + struct nouveau_fb_engine *pfb = &dev_priv->engine.fb; + uint32_t tmp; int i; /* This is strictly a NV4x register (don't know about NV5x). */ @@ -23,35 +48,23 @@ nv40_fb_init(struct drm_device *dev) case 0x45: tmp = nv_rd32(dev, NV10_PFB_CLOSE_PAGE2); nv_wr32(dev, NV10_PFB_CLOSE_PAGE2, tmp & ~(1 << 15)); - num_tiles = NV10_PFB_TILE__SIZE; + pfb->num_tiles = NV10_PFB_TILE__SIZE; break; case 0x46: /* G72 */ case 0x47: /* G70 */ case 0x49: /* G71 */ case 0x4b: /* G73 */ case 0x4c: /* C51 (G7X version) */ - num_tiles = NV40_PFB_TILE__SIZE_1; + pfb->num_tiles = NV40_PFB_TILE__SIZE_1; break; default: - num_tiles = NV40_PFB_TILE__SIZE_0; + pfb->num_tiles = NV40_PFB_TILE__SIZE_0; break; } - fb_bar_size = drm_get_resource_len(dev, 0) - 1; - switch (dev_priv->chipset) { - case 0x40: - for (i = 0; i < num_tiles; i++) { - nv_wr32(dev, NV10_PFB_TILE(i), 0); - nv_wr32(dev, NV10_PFB_TLIMIT(i), fb_bar_size); - } - break; - default: - for (i = 0; i < num_tiles; i++) { - nv_wr32(dev, NV40_PFB_TILE(i), 0); - nv_wr32(dev, NV40_PFB_TLIMIT(i), fb_bar_size); - } - break; - } + /* Turn all the tiling regions off. */ + for (i = 0; i < pfb->num_tiles; i++) + pfb->set_region_tiling(dev, i, 0, 0, 0); return 0; } diff --git a/drivers/gpu/drm/nouveau/nv40_graph.c b/drivers/gpu/drm/nouveau/nv40_graph.c index 2b332bb55acf..53e8afe1dcd1 100644 --- a/drivers/gpu/drm/nouveau/nv40_graph.c +++ b/drivers/gpu/drm/nouveau/nv40_graph.c @@ -181,6 +181,48 @@ nv40_graph_unload_context(struct drm_device *dev) return ret; } +void +nv40_graph_set_region_tiling(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + uint32_t limit = max(1u, addr + size) - 1; + + if (pitch) + addr |= 1; + + switch (dev_priv->chipset) { + case 0x44: + case 0x4a: + case 0x4e: + nv_wr32(dev, NV20_PGRAPH_TSIZE(i), pitch); + nv_wr32(dev, NV20_PGRAPH_TLIMIT(i), limit); + nv_wr32(dev, NV20_PGRAPH_TILE(i), addr); + break; + + case 0x46: + case 0x47: + case 0x49: + case 0x4b: + nv_wr32(dev, NV47_PGRAPH_TSIZE(i), pitch); + nv_wr32(dev, NV47_PGRAPH_TLIMIT(i), limit); + nv_wr32(dev, NV47_PGRAPH_TILE(i), addr); + nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), pitch); + nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), limit); + nv_wr32(dev, NV40_PGRAPH_TILE1(i), addr); + break; + + default: + nv_wr32(dev, NV20_PGRAPH_TSIZE(i), pitch); + nv_wr32(dev, NV20_PGRAPH_TLIMIT(i), limit); + nv_wr32(dev, NV20_PGRAPH_TILE(i), addr); + nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), pitch); + nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), limit); + nv_wr32(dev, NV40_PGRAPH_TILE1(i), addr); + break; + } +} + /* * G70 0x47 * G71 0x49 @@ -195,7 +237,8 @@ nv40_graph_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = (struct drm_nouveau_private *)dev->dev_private; - uint32_t vramsz, tmp; + struct nouveau_fb_engine *pfb = &dev_priv->engine.fb; + uint32_t vramsz; int i, j; nv_wr32(dev, NV03_PMC_ENABLE, nv_rd32(dev, NV03_PMC_ENABLE) & @@ -292,74 +335,9 @@ nv40_graph_init(struct drm_device *dev) nv_wr32(dev, 0x400b38, 0x2ffff800); nv_wr32(dev, 0x400b3c, 0x00006000); - /* copy tile info from PFB */ - switch (dev_priv->chipset) { - case 0x40: /* vanilla NV40 */ - for (i = 0; i < NV10_PFB_TILE__SIZE; i++) { - tmp = nv_rd32(dev, NV10_PFB_TILE(i)); - nv_wr32(dev, NV40_PGRAPH_TILE0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TILE1(i), tmp); - tmp = nv_rd32(dev, NV10_PFB_TLIMIT(i)); - nv_wr32(dev, NV40_PGRAPH_TLIMIT0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), tmp); - tmp = nv_rd32(dev, NV10_PFB_TSIZE(i)); - nv_wr32(dev, NV40_PGRAPH_TSIZE0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), tmp); - tmp = nv_rd32(dev, NV10_PFB_TSTATUS(i)); - nv_wr32(dev, NV40_PGRAPH_TSTATUS0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TSTATUS1(i), tmp); - } - break; - case 0x44: - case 0x4a: - case 0x4e: /* NV44-based cores don't have 0x406900? */ - for (i = 0; i < NV40_PFB_TILE__SIZE_0; i++) { - tmp = nv_rd32(dev, NV40_PFB_TILE(i)); - nv_wr32(dev, NV40_PGRAPH_TILE0(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TLIMIT(i)); - nv_wr32(dev, NV40_PGRAPH_TLIMIT0(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TSIZE(i)); - nv_wr32(dev, NV40_PGRAPH_TSIZE0(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TSTATUS(i)); - nv_wr32(dev, NV40_PGRAPH_TSTATUS0(i), tmp); - } - break; - case 0x46: - case 0x47: - case 0x49: - case 0x4b: /* G7X-based cores */ - for (i = 0; i < NV40_PFB_TILE__SIZE_1; i++) { - tmp = nv_rd32(dev, NV40_PFB_TILE(i)); - nv_wr32(dev, NV47_PGRAPH_TILE0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TILE1(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TLIMIT(i)); - nv_wr32(dev, NV47_PGRAPH_TLIMIT0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TSIZE(i)); - nv_wr32(dev, NV47_PGRAPH_TSIZE0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TSTATUS(i)); - nv_wr32(dev, NV47_PGRAPH_TSTATUS0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TSTATUS1(i), tmp); - } - break; - default: /* everything else */ - for (i = 0; i < NV40_PFB_TILE__SIZE_0; i++) { - tmp = nv_rd32(dev, NV40_PFB_TILE(i)); - nv_wr32(dev, NV40_PGRAPH_TILE0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TILE1(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TLIMIT(i)); - nv_wr32(dev, NV40_PGRAPH_TLIMIT0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TSIZE(i)); - nv_wr32(dev, NV40_PGRAPH_TSIZE0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), tmp); - tmp = nv_rd32(dev, NV40_PFB_TSTATUS(i)); - nv_wr32(dev, NV40_PGRAPH_TSTATUS0(i), tmp); - nv_wr32(dev, NV40_PGRAPH_TSTATUS1(i), tmp); - } - break; - } + /* Turn all the tiling regions off. */ + for (i = 0; i < pfb->num_tiles; i++) + nv40_graph_set_region_tiling(dev, i, 0, 0, 0); /* begin RAM config */ vramsz = drm_get_resource_len(dev, 0) - 1; From 287c1532145b63d394060d46c0309b123b862345 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Fri, 11 Dec 2009 16:51:09 +0100 Subject: [PATCH 0620/1626] drm/nouveau: Make the MM aware of pre-G80 tiling. This commit has also the following 3 bugfix commits squashed into it from the nouveau git tree: drm/nouveau: Fix up the tiling alignment restrictions for nv1x. drm/nouveau: Fix up the nv2x tiling alignment restrictions. drm/nv50: fix align typo for g9x Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_bo.c | 223 ++++++++++++++++++-------- drivers/gpu/drm/nouveau/nouveau_drv.h | 22 +++ drivers/gpu/drm/nouveau/nouveau_mem.c | 87 ++++++++++ 3 files changed, 266 insertions(+), 66 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 0cad6d834eb2..1d6036fabd5d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -37,6 +37,7 @@ static void nouveau_bo_del_ttm(struct ttm_buffer_object *bo) { struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev); + struct drm_device *dev = dev_priv->dev; struct nouveau_bo *nvbo = nouveau_bo(bo); ttm_bo_kunmap(&nvbo->kmap); @@ -44,12 +45,83 @@ nouveau_bo_del_ttm(struct ttm_buffer_object *bo) if (unlikely(nvbo->gem)) DRM_ERROR("bo %p still attached to GEM object\n", bo); + if (nvbo->tile) + nv10_mem_expire_tiling(dev, nvbo->tile, NULL); + spin_lock(&dev_priv->ttm.bo_list_lock); list_del(&nvbo->head); spin_unlock(&dev_priv->ttm.bo_list_lock); kfree(nvbo); } +static void +nouveau_bo_fixup_align(struct drm_device *dev, + uint32_t tile_mode, uint32_t tile_flags, + int *align, int *size) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + + /* + * Some of the tile_flags have a periodic structure of N*4096 bytes, + * align to to that as well as the page size. Overallocate memory to + * avoid corruption of other buffer objects. + */ + if (dev_priv->card_type == NV_50) { + switch (tile_flags) { + case 0x1800: + case 0x2800: + case 0x4800: + case 0x7a00: + if (dev_priv->chipset >= 0xA0) { + /* This is based on high end cards with 448 bits + * memory bus, could be different elsewhere.*/ + *size += 6 * 28672; + /* 8 * 28672 is the actual alignment requirement + * but we must also align to page size. */ + *align = 2 * 8 * 28672; + } else if (dev_priv->chipset >= 0x90) { + *size += 3 * 16384; + *align = 12 * 16384; + } else { + *size += 3 * 8192; + /* 12 * 8192 is the actual alignment requirement + * but we must also align to page size. */ + *align = 2 * 12 * 8192; + } + break; + default: + break; + } + + } else { + if (tile_mode) { + if (dev_priv->chipset >= 0x40) { + *align = 65536; + *size = roundup(*size, 64 * tile_mode); + + } else if (dev_priv->chipset >= 0x30) { + *align = 32768; + *size = roundup(*size, 64 * tile_mode); + + } else if (dev_priv->chipset >= 0x20) { + *align = 16384; + *size = roundup(*size, 64 * tile_mode); + + } else if (dev_priv->chipset >= 0x10) { + *align = 16384; + *size = roundup(*size, 32 * tile_mode); + } + } + } + + *size = ALIGN(*size, PAGE_SIZE); + + if (dev_priv->card_type == NV_50) { + *size = ALIGN(*size, 65536); + *align = max(65536, *align); + } +} + int nouveau_bo_new(struct drm_device *dev, struct nouveau_channel *chan, int size, int align, uint32_t flags, uint32_t tile_mode, @@ -70,46 +142,9 @@ nouveau_bo_new(struct drm_device *dev, struct nouveau_channel *chan, nvbo->tile_mode = tile_mode; nvbo->tile_flags = tile_flags; - /* - * Some of the tile_flags have a periodic structure of N*4096 bytes, - * align to to that as well as the page size. Overallocate memory to - * avoid corruption of other buffer objects. - */ - switch (tile_flags) { - case 0x1800: - case 0x2800: - case 0x4800: - case 0x7a00: - if (dev_priv->chipset >= 0xA0) { - /* This is based on high end cards with 448 bits - * memory bus, could be different elsewhere.*/ - size += 6 * 28672; - /* 8 * 28672 is the actual alignment requirement, - * but we must also align to page size. */ - align = 2 * 8 * 28672; - } else if (dev_priv->chipset >= 0x90) { - size += 3 * 16384; - align = 12 * 16834; - } else { - size += 3 * 8192; - /* 12 * 8192 is the actual alignment requirement, - * but we must also align to page size. */ - align = 2 * 12 * 8192; - } - break; - default: - break; - } - + nouveau_bo_fixup_align(dev, tile_mode, tile_flags, &align, &size); align >>= PAGE_SHIFT; - size = (size + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); - if (dev_priv->card_type == NV_50) { - size = (size + 65535) & ~65535; - if (align < (65536 / PAGE_SIZE)) - align = (65536 / PAGE_SIZE); - } - if (flags & TTM_PL_FLAG_VRAM) nvbo->placements[n++] = TTM_PL_FLAG_VRAM | TTM_PL_MASK_CACHING; if (flags & TTM_PL_FLAG_TT) @@ -421,6 +456,7 @@ nouveau_bo_evict_flags(struct ttm_buffer_object *bo, struct ttm_placement *pl) /* GPU-assisted copy using NV_MEMORY_TO_MEMORY_FORMAT, can access * TTM_PL_{VRAM,TT} directly. */ + static int nouveau_bo_move_accel_cleanup(struct nouveau_channel *chan, struct nouveau_bo *nvbo, bool evict, bool no_wait, @@ -455,11 +491,12 @@ nouveau_bo_mem_ctxdma(struct nouveau_bo *nvbo, struct nouveau_channel *chan, } static int -nouveau_bo_move_m2mf(struct ttm_buffer_object *bo, int evict, int no_wait, - struct ttm_mem_reg *old_mem, struct ttm_mem_reg *new_mem) +nouveau_bo_move_m2mf(struct ttm_buffer_object *bo, int evict, bool intr, + int no_wait, struct ttm_mem_reg *new_mem) { struct nouveau_bo *nvbo = nouveau_bo(bo); struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev); + struct ttm_mem_reg *old_mem = &bo->mem; struct nouveau_channel *chan; uint64_t src_offset, dst_offset; uint32_t page_count; @@ -559,7 +596,7 @@ nouveau_bo_move_flipd(struct ttm_buffer_object *bo, bool evict, bool intr, if (ret) goto out; - ret = nouveau_bo_move_m2mf(bo, true, no_wait, &bo->mem, &tmp_mem); + ret = nouveau_bo_move_m2mf(bo, true, intr, no_wait, &tmp_mem); if (ret) goto out; @@ -597,7 +634,7 @@ nouveau_bo_move_flips(struct ttm_buffer_object *bo, bool evict, bool intr, if (ret) goto out; - ret = nouveau_bo_move_m2mf(bo, true, no_wait, &bo->mem, new_mem); + ret = nouveau_bo_move_m2mf(bo, true, intr, no_wait, new_mem); if (ret) goto out; @@ -612,52 +649,106 @@ out: } static int -nouveau_bo_move(struct ttm_buffer_object *bo, bool evict, bool intr, - bool no_wait, struct ttm_mem_reg *new_mem) +nouveau_bo_vm_bind(struct ttm_buffer_object *bo, struct ttm_mem_reg *new_mem, + struct nouveau_tile_reg **new_tile) { struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev); - struct nouveau_bo *nvbo = nouveau_bo(bo); struct drm_device *dev = dev_priv->dev; - struct ttm_mem_reg *old_mem = &bo->mem; + struct nouveau_bo *nvbo = nouveau_bo(bo); + uint64_t offset; int ret; - if (dev_priv->card_type == NV_50 && new_mem->mem_type == TTM_PL_VRAM && - !nvbo->no_vm) { - uint64_t offset = new_mem->mm_node->start << PAGE_SHIFT; + if (nvbo->no_vm || new_mem->mem_type != TTM_PL_VRAM) { + /* Nothing to do. */ + *new_tile = NULL; + return 0; + } + offset = new_mem->mm_node->start << PAGE_SHIFT; + + if (dev_priv->card_type == NV_50) { ret = nv50_mem_vm_bind_linear(dev, offset + dev_priv->vm_vram_base, new_mem->size, nvbo->tile_flags, offset); if (ret) return ret; + + } else if (dev_priv->card_type >= NV_10) { + *new_tile = nv10_mem_set_tiling(dev, offset, new_mem->size, + nvbo->tile_mode); } - if (dev_priv->init_state != NOUVEAU_CARD_INIT_DONE || - !dev_priv->channel) - return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); + return 0; +} +static void +nouveau_bo_vm_cleanup(struct ttm_buffer_object *bo, + struct nouveau_tile_reg *new_tile, + struct nouveau_tile_reg **old_tile) +{ + struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev); + struct drm_device *dev = dev_priv->dev; + + if (dev_priv->card_type >= NV_10 && + dev_priv->card_type < NV_50) { + if (*old_tile) + nv10_mem_expire_tiling(dev, *old_tile, bo->sync_obj); + + *old_tile = new_tile; + } +} + +static int +nouveau_bo_move(struct ttm_buffer_object *bo, bool evict, bool intr, + bool no_wait, struct ttm_mem_reg *new_mem) +{ + struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev); + struct nouveau_bo *nvbo = nouveau_bo(bo); + struct ttm_mem_reg *old_mem = &bo->mem; + struct nouveau_tile_reg *new_tile = NULL; + int ret = 0; + + ret = nouveau_bo_vm_bind(bo, new_mem, &new_tile); + if (ret) + return ret; + + /* Software copy if the card isn't up and running yet. */ + if (dev_priv->init_state != NOUVEAU_CARD_INIT_DONE || + !dev_priv->channel) { + ret = ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); + goto out; + } + + /* Fake bo copy. */ if (old_mem->mem_type == TTM_PL_SYSTEM && !bo->ttm) { BUG_ON(bo->mem.mm_node != NULL); bo->mem = *new_mem; new_mem->mm_node = NULL; - return 0; + goto out; } - if (new_mem->mem_type == TTM_PL_SYSTEM) { - if (old_mem->mem_type == TTM_PL_SYSTEM) - return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); - if (nouveau_bo_move_flipd(bo, evict, intr, no_wait, new_mem)) - return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); - } else if (old_mem->mem_type == TTM_PL_SYSTEM) { - if (nouveau_bo_move_flips(bo, evict, intr, no_wait, new_mem)) - return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); - } else { - if (nouveau_bo_move_m2mf(bo, evict, no_wait, old_mem, new_mem)) - return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); - } + /* Hardware assisted copy. */ + if (new_mem->mem_type == TTM_PL_SYSTEM) + ret = nouveau_bo_move_flipd(bo, evict, intr, no_wait, new_mem); + else if (old_mem->mem_type == TTM_PL_SYSTEM) + ret = nouveau_bo_move_flips(bo, evict, intr, no_wait, new_mem); + else + ret = nouveau_bo_move_m2mf(bo, evict, intr, no_wait, new_mem); - return 0; + if (!ret) + goto out; + + /* Fallback to software copy. */ + ret = ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); + +out: + if (ret) + nouveau_bo_vm_cleanup(bo, NULL, &new_tile); + else + nouveau_bo_vm_cleanup(bo, new_tile, &nvbo->tile); + + return ret; } static int diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 446a92ad2eef..9c9815bf505a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -59,11 +59,19 @@ struct nouveau_grctx; #define MAX_NUM_DCB_ENTRIES 16 #define NOUVEAU_MAX_CHANNEL_NR 128 +#define NOUVEAU_MAX_TILE_NR 15 #define NV50_VM_MAX_VRAM (2*1024*1024*1024ULL) #define NV50_VM_BLOCK (512*1024*1024ULL) #define NV50_VM_VRAM_NR (NV50_VM_MAX_VRAM / NV50_VM_BLOCK) +struct nouveau_tile_reg { + struct nouveau_fence *fence; + uint32_t addr; + uint32_t size; + bool used; +}; + struct nouveau_bo { struct ttm_buffer_object bo; struct ttm_placement placement; @@ -83,6 +91,7 @@ struct nouveau_bo { uint32_t tile_mode; uint32_t tile_flags; + struct nouveau_tile_reg *tile; struct drm_gem_object *gem; struct drm_file *cpu_filp; @@ -558,6 +567,12 @@ struct drm_nouveau_private { unsigned long sg_handle; } gart_info; + /* nv10-nv40 tiling regions */ + struct { + struct nouveau_tile_reg reg[NOUVEAU_MAX_TILE_NR]; + spinlock_t lock; + } tile; + /* G8x/G9x virtual address space */ uint64_t vm_gart_base; uint64_t vm_gart_size; @@ -695,6 +710,13 @@ extern void nouveau_mem_release(struct drm_file *, struct mem_block *heap); extern int nouveau_mem_init(struct drm_device *); extern int nouveau_mem_init_agp(struct drm_device *); extern void nouveau_mem_close(struct drm_device *); +extern struct nouveau_tile_reg *nv10_mem_set_tiling(struct drm_device *dev, + uint32_t addr, + uint32_t size, + uint32_t pitch); +extern void nv10_mem_expire_tiling(struct drm_device *dev, + struct nouveau_tile_reg *tile, + struct nouveau_fence *fence); extern int nv50_mem_vm_bind_linear(struct drm_device *, uint64_t virt, uint32_t size, uint32_t flags, uint64_t phys); diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c index 5158a12f7844..fb9bdd6edf1f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mem.c +++ b/drivers/gpu/drm/nouveau/nouveau_mem.c @@ -191,6 +191,92 @@ void nouveau_mem_release(struct drm_file *file_priv, struct mem_block *heap) } } +/* + * NV10-NV40 tiling helpers + */ + +static void +nv10_mem_set_region_tiling(struct drm_device *dev, int i, uint32_t addr, + uint32_t size, uint32_t pitch) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_fifo_engine *pfifo = &dev_priv->engine.fifo; + struct nouveau_fb_engine *pfb = &dev_priv->engine.fb; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + struct nouveau_tile_reg *tile = &dev_priv->tile.reg[i]; + + tile->addr = addr; + tile->size = size; + tile->used = !!pitch; + nouveau_fence_unref((void **)&tile->fence); + + if (!pfifo->cache_flush(dev)) + return; + + pfifo->reassign(dev, false); + pfifo->cache_flush(dev); + pfifo->cache_pull(dev, false); + + nouveau_wait_for_idle(dev); + + pgraph->set_region_tiling(dev, i, addr, size, pitch); + pfb->set_region_tiling(dev, i, addr, size, pitch); + + pfifo->cache_pull(dev, true); + pfifo->reassign(dev, true); +} + +struct nouveau_tile_reg * +nv10_mem_set_tiling(struct drm_device *dev, uint32_t addr, uint32_t size, + uint32_t pitch) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_fb_engine *pfb = &dev_priv->engine.fb; + struct nouveau_tile_reg *tile = dev_priv->tile.reg, *found = NULL; + int i; + + spin_lock(&dev_priv->tile.lock); + + for (i = 0; i < pfb->num_tiles; i++) { + if (tile[i].used) + /* Tile region in use. */ + continue; + + if (tile[i].fence && + !nouveau_fence_signalled(tile[i].fence, NULL)) + /* Pending tile region. */ + continue; + + if (max(tile[i].addr, addr) < + min(tile[i].addr + tile[i].size, addr + size)) + /* Kill an intersecting tile region. */ + nv10_mem_set_region_tiling(dev, i, 0, 0, 0); + + if (pitch && !found) { + /* Free tile region. */ + nv10_mem_set_region_tiling(dev, i, addr, size, pitch); + found = &tile[i]; + } + } + + spin_unlock(&dev_priv->tile.lock); + + return found; +} + +void +nv10_mem_expire_tiling(struct drm_device *dev, struct nouveau_tile_reg *tile, + struct nouveau_fence *fence) +{ + if (fence) { + /* Mark it as pending. */ + tile->fence = fence; + nouveau_fence_ref(fence); + } + + tile->used = false; +} + /* * NV50 VM helpers */ @@ -513,6 +599,7 @@ nouveau_mem_init(struct drm_device *dev) INIT_LIST_HEAD(&dev_priv->ttm.bo_list); spin_lock_init(&dev_priv->ttm.bo_list_lock); + spin_lock_init(&dev_priv->tile.lock); dev_priv->fb_available_size = nouveau_mem_fb_amount(dev); From 73cb9276fd189c19558a97600456bd13fa5debe8 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Wed, 16 Dec 2009 12:27:11 +0100 Subject: [PATCH 0621/1626] drm/i2c/ch7006: Drop build time dependency to nouveau. This partially reverts e4b41066, as this driver is intended to be useful with any KMS driver for suitable hardware. The missing build dependency that commit workarounded was DRM_KMS_HELPER. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/Kconfig | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/Kconfig b/drivers/gpu/drm/nouveau/Kconfig index b1bc1ea182b8..1175429da102 100644 --- a/drivers/gpu/drm/nouveau/Kconfig +++ b/drivers/gpu/drm/nouveau/Kconfig @@ -30,12 +30,11 @@ config DRM_NOUVEAU_DEBUG via debugfs. menu "I2C encoder or helper chips" - depends on DRM && I2C + depends on DRM && DRM_KMS_HELPER && I2C config DRM_I2C_CH7006 tristate "Chrontel ch7006 TV encoder" - depends on DRM_NOUVEAU - default m + default m if DRM_NOUVEAU help Support for Chrontel ch7006 and similar TV encoders, found on some nVidia video cards. From c6af6053be60840dcbb037c3798557cbf71cbb08 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Wed, 16 Dec 2009 19:05:00 +0100 Subject: [PATCH 0622/1626] drm/nouveau: Fix "general protection fault" in the flipd/flips eviction path. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_bo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 1d6036fabd5d..365fc6508173 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -584,7 +584,7 @@ nouveau_bo_move_flipd(struct ttm_buffer_object *bo, bool evict, bool intr, placement.fpfn = placement.lpfn = 0; placement.num_placement = placement.num_busy_placement = 1; - placement.placement = &placement_memtype; + placement.placement = placement.busy_placement = &placement_memtype; tmp_mem = *new_mem; tmp_mem.mm_node = NULL; @@ -622,7 +622,7 @@ nouveau_bo_move_flips(struct ttm_buffer_object *bo, bool evict, bool intr, placement.fpfn = placement.lpfn = 0; placement.num_placement = placement.num_busy_placement = 1; - placement.placement = &placement_memtype; + placement.placement = placement.busy_placement = &placement_memtype; tmp_mem = *new_mem; tmp_mem.mm_node = NULL; From 69a18c328b762eaec3f8ca3af8c7cbf10b536bf8 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Wed, 16 Dec 2009 19:05:38 +0100 Subject: [PATCH 0623/1626] drm/nouveau: No need to force evict=true when swapping evicted BOs back in. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_bo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 365fc6508173..73af53fe75a0 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -634,7 +634,7 @@ nouveau_bo_move_flips(struct ttm_buffer_object *bo, bool evict, bool intr, if (ret) goto out; - ret = nouveau_bo_move_m2mf(bo, true, intr, no_wait, new_mem); + ret = nouveau_bo_move_m2mf(bo, evict, intr, no_wait, new_mem); if (ret) goto out; From aeca15e596eba284c727049d0b9b855b13c48856 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Wed, 16 Dec 2009 19:03:28 +0100 Subject: [PATCH 0624/1626] drm/nouveau: Drop redundant placement initialization. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_bo.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 73af53fe75a0..5fd462f49407 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -130,7 +130,7 @@ nouveau_bo_new(struct drm_device *dev, struct nouveau_channel *chan, { struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_bo *nvbo; - int ret, n = 0; + int ret = 0; nvbo = kzalloc(sizeof(struct nouveau_bo), GFP_KERNEL); if (!nvbo) @@ -145,19 +145,11 @@ nouveau_bo_new(struct drm_device *dev, struct nouveau_channel *chan, nouveau_bo_fixup_align(dev, tile_mode, tile_flags, &align, &size); align >>= PAGE_SHIFT; - if (flags & TTM_PL_FLAG_VRAM) - nvbo->placements[n++] = TTM_PL_FLAG_VRAM | TTM_PL_MASK_CACHING; - if (flags & TTM_PL_FLAG_TT) - nvbo->placements[n++] = TTM_PL_FLAG_TT | TTM_PL_MASK_CACHING; nvbo->placement.fpfn = 0; nvbo->placement.lpfn = mappable ? dev_priv->fb_mappable_pages : 0; - nvbo->placement.placement = nvbo->placements; - nvbo->placement.busy_placement = nvbo->placements; - nvbo->placement.num_placement = n; - nvbo->placement.num_busy_placement = n; + nouveau_bo_placement_set(nvbo, flags); nvbo->channel = chan; - nouveau_bo_placement_set(nvbo, flags); ret = ttm_bo_init(&dev_priv->ttm.bdev, &nvbo->bo, size, ttm_bo_type_device, &nvbo->placement, align, 0, false, NULL, size, nouveau_bo_del_ttm); From fbe36a7a069267b82b7b82a66d79a4406cfa90b2 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 21 Dec 2009 12:16:52 +1000 Subject: [PATCH 0625/1626] drm/nv50: ignore vbios table's claim to the contrary if EDID says >8bpc Should fix dim panel issues reported on Dell M6400/M6500. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_display.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index a9263d92a231..90f0bf59fbcd 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -690,9 +690,21 @@ nv50_display_script_select(struct drm_device *dev, struct dcb_entry *dcbent, int pxclk) { struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_connector *nv_connector = NULL; + struct drm_encoder *encoder; struct nvbios *bios = &dev_priv->VBIOS; uint32_t mc, script = 0, or; + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); + + if (nv_encoder->dcb != dcbent) + continue; + + nv_connector = nouveau_encoder_connector_get(nv_encoder); + break; + } + or = ffs(dcbent->or) - 1; mc = nv50_display_mode_ctrl(dev, dcbent->type != OUTPUT_ANALOG, or); switch (dcbent->type) { @@ -711,6 +723,11 @@ nv50_display_script_select(struct drm_device *dev, struct dcb_entry *dcbent, } else if (bios->fp.strapless_is_24bit & 1) script |= 0x0200; + + if (nv_connector && nv_connector->edid && + (nv_connector->edid->revision >= 4) && + (nv_connector->edid->input & 0x70) >= 0x20) + script |= 0x0200; } if (nouveau_uscript_lvds >= 0) { From e55ca7e68efc7c2d320cd9975ebc5e0fd27debf0 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 21 Dec 2009 23:00:41 +0100 Subject: [PATCH 0626/1626] drm/nv50: fix fillrect color struct fb_fillrect->color is not a color, but index into pseudo_palette array Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_fbcon.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv50_fbcon.c b/drivers/gpu/drm/nouveau/nv50_fbcon.c index 6bcc6d39e9b0..c966ef834853 100644 --- a/drivers/gpu/drm/nouveau/nv50_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv50_fbcon.c @@ -10,6 +10,7 @@ nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) struct drm_device *dev = par->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_channel *chan = dev_priv->channel; + uint32_t color = ((uint32_t *) info->pseudo_palette)[rect->color]; if (info->state != FBINFO_STATE_RUNNING) return; @@ -31,7 +32,7 @@ nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) OUT_RING(chan, 1); } BEGIN_RING(chan, NvSub2D, 0x0588, 1); - OUT_RING(chan, rect->color); + OUT_RING(chan, color); BEGIN_RING(chan, NvSub2D, 0x0600, 4); OUT_RING(chan, rect->dx); OUT_RING(chan, rect->dy); From 02076da97a15bbf7477bffed71d02f726de2afc2 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Thu, 17 Dec 2009 18:52:44 +0100 Subject: [PATCH 0627/1626] drm/nouveau: Clean up the nv17-nv4x load detection code a bit. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_drv.h | 6 +---- drivers/gpu/drm/nouveau/nv04_dac.c | 37 +++++++++++++++------------ drivers/gpu/drm/nouveau/nv17_tv.c | 27 +++++++++++-------- 3 files changed, 38 insertions(+), 32 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 9c9815bf505a..7da88a92c83f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -1074,8 +1074,7 @@ extern long nouveau_compat_ioctl(struct file *file, unsigned int cmd, /* nv04_dac.c */ extern int nv04_dac_create(struct drm_device *dev, struct dcb_entry *entry); -extern enum drm_connector_status nv17_dac_detect(struct drm_encoder *encoder, - struct drm_connector *connector); +extern uint32_t nv17_dac_sample_load(struct drm_encoder *encoder); extern int nv04_dac_output_offset(struct drm_encoder *encoder); extern void nv04_dac_update_dacclk(struct drm_encoder *encoder, bool enable); @@ -1093,9 +1092,6 @@ extern int nv04_tv_create(struct drm_device *dev, struct dcb_entry *entry); /* nv17_tv.c */ extern int nv17_tv_create(struct drm_device *dev, struct dcb_entry *entry); -extern enum drm_connector_status nv17_tv_detect(struct drm_encoder *encoder, - struct drm_connector *connector, - uint32_t pin_mask); /* nv04_display.c */ extern int nv04_display_create(struct drm_device *); diff --git a/drivers/gpu/drm/nouveau/nv04_dac.c b/drivers/gpu/drm/nouveau/nv04_dac.c index d9f32879ba38..d0e038d28948 100644 --- a/drivers/gpu/drm/nouveau/nv04_dac.c +++ b/drivers/gpu/drm/nouveau/nv04_dac.c @@ -212,16 +212,15 @@ out: return connector_status_disconnected; } -enum drm_connector_status nv17_dac_detect(struct drm_encoder *encoder, - struct drm_connector *connector) +uint32_t nv17_dac_sample_load(struct drm_encoder *encoder) { struct drm_device *dev = encoder->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb; - uint32_t testval, regoffset = nv04_dac_output_offset(encoder); + uint32_t sample, testval, regoffset = nv04_dac_output_offset(encoder); uint32_t saved_powerctrl_2 = 0, saved_powerctrl_4 = 0, saved_routput, saved_rtest_ctrl, saved_gpio0, saved_gpio1, temp, routput; - int head, present = 0; + int head; #define RGB_TEST_DATA(r, g, b) (r << 0 | g << 10 | b << 20) if (dcb->type == OUTPUT_TV) { @@ -287,13 +286,7 @@ enum drm_connector_status nv17_dac_detect(struct drm_encoder *encoder, temp | NV_PRAMDAC_TEST_CONTROL_TP_INS_EN_ASSERTED); msleep(5); - temp = NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset); - - if (dcb->type == OUTPUT_TV) - present = (nv17_tv_detect(encoder, connector, temp) - == connector_status_connected); - else - present = temp & NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI; + sample = NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset); temp = NVReadRAMDAC(dev, head, NV_PRAMDAC_TEST_CONTROL); NVWriteRAMDAC(dev, head, NV_PRAMDAC_TEST_CONTROL, @@ -310,14 +303,24 @@ enum drm_connector_status nv17_dac_detect(struct drm_encoder *encoder, nv17_gpio_set(dev, DCB_GPIO_TVDAC1, saved_gpio1); nv17_gpio_set(dev, DCB_GPIO_TVDAC0, saved_gpio0); - if (present) { - NV_INFO(dev, "Load detected on output %c\n", '@' + ffs(dcb->or)); - return connector_status_connected; - } - - return connector_status_disconnected; + return sample; } +static enum drm_connector_status +nv17_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) +{ + struct drm_device *dev = encoder->dev; + struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb; + uint32_t sample = nv17_dac_sample_load(encoder); + + if (sample & NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI) { + NV_INFO(dev, "Load detected on output %c\n", + '@' + ffs(dcb->or)); + return connector_status_connected; + } else { + return connector_status_disconnected; + } +} static bool nv04_dac_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, diff --git a/drivers/gpu/drm/nouveau/nv17_tv.c b/drivers/gpu/drm/nouveau/nv17_tv.c index 81c01353a9f9..5fa4242e4c7d 100644 --- a/drivers/gpu/drm/nouveau/nv17_tv.c +++ b/drivers/gpu/drm/nouveau/nv17_tv.c @@ -33,13 +33,15 @@ #include "nouveau_hw.h" #include "nv17_tv.h" -enum drm_connector_status nv17_tv_detect(struct drm_encoder *encoder, - struct drm_connector *connector, - uint32_t pin_mask) +static enum drm_connector_status +nv17_tv_detect(struct drm_encoder *encoder, struct drm_connector *connector) { + struct drm_device *dev = encoder->dev; + struct drm_mode_config *conf = &dev->mode_config; struct nv17_tv_encoder *tv_enc = to_tv_enc(encoder); + struct dcb_entry *dcb = tv_enc->base.dcb; - tv_enc->pin_mask = pin_mask >> 28 & 0xe; + tv_enc->pin_mask = nv17_dac_sample_load(encoder) >> 28 & 0xe; switch (tv_enc->pin_mask) { case 0x2: @@ -50,7 +52,7 @@ enum drm_connector_status nv17_tv_detect(struct drm_encoder *encoder, tv_enc->subconnector = DRM_MODE_SUBCONNECTOR_SVIDEO; break; case 0xe: - if (nouveau_encoder(encoder)->dcb->tvconf.has_component_output) + if (dcb->tvconf.has_component_output) tv_enc->subconnector = DRM_MODE_SUBCONNECTOR_Component; else tv_enc->subconnector = DRM_MODE_SUBCONNECTOR_SCART; @@ -61,11 +63,16 @@ enum drm_connector_status nv17_tv_detect(struct drm_encoder *encoder, } drm_connector_property_set_value(connector, - encoder->dev->mode_config.tv_subconnector_property, - tv_enc->subconnector); + conf->tv_subconnector_property, + tv_enc->subconnector); - return tv_enc->subconnector ? connector_status_connected : - connector_status_disconnected; + if (tv_enc->subconnector) { + NV_INFO(dev, "Load detected on output %c\n", + '@' + ffs(dcb->or)); + return connector_status_connected; + } else { + return connector_status_disconnected; + } } static const struct { @@ -633,7 +640,7 @@ static struct drm_encoder_helper_funcs nv17_tv_helper_funcs = { .prepare = nv17_tv_prepare, .commit = nv17_tv_commit, .mode_set = nv17_tv_mode_set, - .detect = nv17_dac_detect, + .detect = nv17_tv_detect, }; static struct drm_encoder_slave_funcs nv17_tv_slave_funcs = { From b7f7e41b895afd110d1f5121161fd401eccd98c9 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Thu, 17 Dec 2009 18:57:44 +0100 Subject: [PATCH 0628/1626] drm/nouveau: Implement nv42-nv43 TV load detection. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nv17_tv.c | 90 ++++++++++++++++++++++++++++++- 1 file changed, 89 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv17_tv.c b/drivers/gpu/drm/nouveau/nv17_tv.c index 5fa4242e4c7d..58b917c3341b 100644 --- a/drivers/gpu/drm/nouveau/nv17_tv.c +++ b/drivers/gpu/drm/nouveau/nv17_tv.c @@ -33,15 +33,103 @@ #include "nouveau_hw.h" #include "nv17_tv.h" +static uint32_t nv42_tv_sample_load(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_nouveau_private *dev_priv = dev->dev_private; + uint32_t testval, regoffset = nv04_dac_output_offset(encoder); + uint32_t gpio0, gpio1, fp_htotal, fp_hsync_start, fp_hsync_end, + fp_control, test_ctrl, dacclk, ctv_14, ctv_1c, ctv_6c; + uint32_t sample = 0; + int head; + +#define RGB_TEST_DATA(r, g, b) (r << 0 | g << 10 | b << 20) + testval = RGB_TEST_DATA(0x82, 0xeb, 0x82); + if (dev_priv->vbios->tvdactestval) + testval = dev_priv->vbios->tvdactestval; + + dacclk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset); + head = (dacclk & 0x100) >> 8; + + /* Save the previous state. */ + gpio1 = nv17_gpio_get(dev, DCB_GPIO_TVDAC1); + gpio0 = nv17_gpio_get(dev, DCB_GPIO_TVDAC0); + fp_htotal = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_HTOTAL); + fp_hsync_start = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_START); + fp_hsync_end = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_END); + fp_control = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL); + test_ctrl = NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset); + ctv_1c = NVReadRAMDAC(dev, head, 0x680c1c); + ctv_14 = NVReadRAMDAC(dev, head, 0x680c14); + ctv_6c = NVReadRAMDAC(dev, head, 0x680c6c); + + /* Prepare the DAC for load detection. */ + nv17_gpio_set(dev, DCB_GPIO_TVDAC1, true); + nv17_gpio_set(dev, DCB_GPIO_TVDAC0, true); + + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HTOTAL, 1343); + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_START, 1047); + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_END, 1183); + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL, + NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS | + NV_PRAMDAC_FP_TG_CONTROL_WIDTH_12 | + NV_PRAMDAC_FP_TG_CONTROL_READ_PROG | + NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS | + NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS); + + NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset, 0); + + NVWriteRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset, + (dacclk & ~0xff) | 0x22); + msleep(1); + NVWriteRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset, + (dacclk & ~0xff) | 0x21); + + NVWriteRAMDAC(dev, head, 0x680c1c, 1 << 20); + NVWriteRAMDAC(dev, head, 0x680c14, 4 << 16); + + /* Sample pin 0x4 (usually S-video luma). */ + NVWriteRAMDAC(dev, head, 0x680c6c, testval >> 10 & 0x3ff); + msleep(20); + sample |= NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset) + & 0x4 << 28; + + /* Sample the remaining pins. */ + NVWriteRAMDAC(dev, head, 0x680c6c, testval & 0x3ff); + msleep(20); + sample |= NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset) + & 0xa << 28; + + /* Restore the previous state. */ + NVWriteRAMDAC(dev, head, 0x680c1c, ctv_1c); + NVWriteRAMDAC(dev, head, 0x680c14, ctv_14); + NVWriteRAMDAC(dev, head, 0x680c6c, ctv_6c); + NVWriteRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset, dacclk); + NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset, test_ctrl); + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL, fp_control); + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_END, fp_hsync_end); + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_START, fp_hsync_start); + NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HTOTAL, fp_htotal); + nv17_gpio_set(dev, DCB_GPIO_TVDAC1, gpio1); + nv17_gpio_set(dev, DCB_GPIO_TVDAC0, gpio0); + + return sample; +} + static enum drm_connector_status nv17_tv_detect(struct drm_encoder *encoder, struct drm_connector *connector) { struct drm_device *dev = encoder->dev; + struct drm_nouveau_private *dev_priv = dev->dev_private; struct drm_mode_config *conf = &dev->mode_config; struct nv17_tv_encoder *tv_enc = to_tv_enc(encoder); struct dcb_entry *dcb = tv_enc->base.dcb; - tv_enc->pin_mask = nv17_dac_sample_load(encoder) >> 28 & 0xe; + if (dev_priv->chipset == 0x42 || + dev_priv->chipset == 0x43) + tv_enc->pin_mask = nv42_tv_sample_load(encoder) >> 28 & 0xe; + else + tv_enc->pin_mask = nv17_dac_sample_load(encoder) >> 28 & 0xe; switch (tv_enc->pin_mask) { case 0x2: From 8f71c29e442e013212a98e2b37eb1074c4d1134f Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Tue, 22 Dec 2009 18:24:09 +0100 Subject: [PATCH 0629/1626] drm/nouveau: Don't skip card take down on nv0x. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_state.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 6a459139910f..a6b573e89829 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -722,8 +722,8 @@ static void nouveau_close(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; - /* In the case of an error dev_priv may not be be allocated yet */ - if (dev_priv && dev_priv->card_type) + /* In the case of an error dev_priv may not be allocated yet */ + if (dev_priv) nouveau_card_takedown(dev); } From c2b82924bda0c3de2b49bd3a4d8b6725721820bc Mon Sep 17 00:00:00 2001 From: Maarten Maathuis Date: Fri, 25 Dec 2009 18:51:17 +0100 Subject: [PATCH 0630/1626] drm/nouveau: better alignment of bo sizes and use roundup instead of ALIGN - Aligning to block size should ensure that the extra size is enough. - Using roundup, because not all sizes are powers of two. Signed-off-by: Maarten Maathuis --- drivers/gpu/drm/nouveau/nouveau_bo.c | 8 ++++++-- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 4 ++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 5fd462f49407..a0c9e00e7062 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -73,6 +73,7 @@ nouveau_bo_fixup_align(struct drm_device *dev, case 0x4800: case 0x7a00: if (dev_priv->chipset >= 0xA0) { + *size = roundup(*size, 28672); /* This is based on high end cards with 448 bits * memory bus, could be different elsewhere.*/ *size += 6 * 28672; @@ -80,9 +81,11 @@ nouveau_bo_fixup_align(struct drm_device *dev, * but we must also align to page size. */ *align = 2 * 8 * 28672; } else if (dev_priv->chipset >= 0x90) { + *size = roundup(*size, 16384); *size += 3 * 16384; *align = 12 * 16384; } else { + *size = roundup(*size, 8192); *size += 3 * 8192; /* 12 * 8192 is the actual alignment requirement * but we must also align to page size. */ @@ -114,10 +117,11 @@ nouveau_bo_fixup_align(struct drm_device *dev, } } - *size = ALIGN(*size, PAGE_SIZE); + /* ALIGN works only on powers of two. */ + *size = roundup(*size, PAGE_SIZE); if (dev_priv->card_type == NV_50) { - *size = ALIGN(*size, 65536); + *size = roundup(*size, 65536); *align = max(65536, *align); } } diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 84af25c238b6..44cbbeeb7745 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -212,11 +212,11 @@ nouveau_fbcon_create(struct drm_device *dev, uint32_t fb_width, mode_cmd.bpp = surface_bpp; mode_cmd.pitch = mode_cmd.width * (mode_cmd.bpp >> 3); - mode_cmd.pitch = ALIGN(mode_cmd.pitch, 256); + mode_cmd.pitch = roundup(mode_cmd.pitch, 256); mode_cmd.depth = surface_depth; size = mode_cmd.pitch * mode_cmd.height; - size = ALIGN(size, PAGE_SIZE); + size = roundup(size, PAGE_SIZE); ret = nouveau_gem_new(dev, dev_priv->channel, size, 0, TTM_PL_FLAG_VRAM, 0, 0x0000, false, true, &nvbo); From 0a2d090f99c9686e5107ed59533fc4210a9a47d1 Mon Sep 17 00:00:00 2001 From: Maarten Maathuis Date: Sat, 26 Dec 2009 21:46:36 +0100 Subject: [PATCH 0631/1626] drm/nv50: make the blocksize depend on vram size - This should be better than what we have now. - I'm less sure about the non power of two path. Signed-off-by: Maarten Maathuis --- drivers/gpu/drm/nouveau/nouveau_bo.c | 36 +++++++++++++++------------- 1 file changed, 19 insertions(+), 17 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index a0c9e00e7062..e342a418d434 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -33,6 +33,8 @@ #include "nouveau_drv.h" #include "nouveau_dma.h" +#include + static void nouveau_bo_del_ttm(struct ttm_buffer_object *bo) { @@ -67,29 +69,29 @@ nouveau_bo_fixup_align(struct drm_device *dev, * avoid corruption of other buffer objects. */ if (dev_priv->card_type == NV_50) { + uint32_t block_size = nouveau_mem_fb_amount(dev) >> 15; + int i; + switch (tile_flags) { case 0x1800: case 0x2800: case 0x4800: case 0x7a00: - if (dev_priv->chipset >= 0xA0) { - *size = roundup(*size, 28672); - /* This is based on high end cards with 448 bits - * memory bus, could be different elsewhere.*/ - *size += 6 * 28672; - /* 8 * 28672 is the actual alignment requirement - * but we must also align to page size. */ - *align = 2 * 8 * 28672; - } else if (dev_priv->chipset >= 0x90) { - *size = roundup(*size, 16384); - *size += 3 * 16384; - *align = 12 * 16384; + *size = roundup(*size, block_size); + if (is_power_of_2(block_size)) { + *size += 3 * block_size; + for (i = 1; i < 10; i++) { + *align = 12 * i * block_size; + if (!(*align % 65536)) + break; + } } else { - *size = roundup(*size, 8192); - *size += 3 * 8192; - /* 12 * 8192 is the actual alignment requirement - * but we must also align to page size. */ - *align = 2 * 12 * 8192; + *size += 6 * block_size; + for (i = 1; i < 10; i++) { + *align = 8 * i * block_size; + if (!(*align % 65536)) + break; + } } break; default: From ca4362adb4c01807dfcf3f2b3152a7ee36f0d1ca Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sat, 26 Dec 2009 02:42:45 +0100 Subject: [PATCH 0632/1626] drm/nouveau: Allocate a per-channel instance of NV_SW. It will be useful for various synchronization purposes, mostly stolen from "[PATCH] drm/nv50: synchronize user channel after buffer object move on kernel channel" by Maarten Maathuis. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_channel.c | 4 +++- drivers/gpu/drm/nouveau/nouveau_dma.c | 17 +++++++++++++++++ drivers/gpu/drm/nouveau/nouveau_dma.h | 10 ++++++---- drivers/gpu/drm/nouveau/nouveau_drv.h | 20 +++++++++++--------- drivers/gpu/drm/nouveau/nouveau_object.c | 2 +- drivers/gpu/drm/nouveau/nv04_fbcon.c | 19 ++++++++++--------- 6 files changed, 48 insertions(+), 24 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c index 9aaa972f8822..4f378b68fe7b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_channel.c +++ b/drivers/gpu/drm/nouveau/nouveau_channel.c @@ -414,7 +414,9 @@ nouveau_ioctl_fifo_alloc(struct drm_device *dev, void *data, init->subchan[0].grclass = 0x0039; else init->subchan[0].grclass = 0x5039; - init->nr_subchan = 1; + init->subchan[1].handle = NvSw; + init->subchan[1].grclass = NV_SW; + init->nr_subchan = 2; /* Named memory object area */ ret = drm_gem_handle_create(file_priv, chan->notifier_bo->gem, diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.c b/drivers/gpu/drm/nouveau/nouveau_dma.c index 703553687b20..f1fd3f2b9813 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dma.c +++ b/drivers/gpu/drm/nouveau/nouveau_dma.c @@ -35,6 +35,7 @@ nouveau_dma_init(struct nouveau_channel *chan) struct drm_device *dev = chan->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_gpuobj *m2mf = NULL; + struct nouveau_gpuobj *nvsw = NULL; int ret, i; /* Create NV_MEMORY_TO_MEMORY_FORMAT for buffer moves */ @@ -47,6 +48,15 @@ nouveau_dma_init(struct nouveau_channel *chan) if (ret) return ret; + /* Create an NV_SW object for various sync purposes */ + ret = nouveau_gpuobj_sw_new(chan, NV_SW, &nvsw); + if (ret) + return ret; + + ret = nouveau_gpuobj_ref_add(dev, chan, NvSw, nvsw, NULL); + if (ret) + return ret; + /* NV_MEMORY_TO_MEMORY_FORMAT requires a notifier object */ ret = nouveau_notifier_alloc(chan, NvNotify0, 32, &chan->m2mf_ntfy); if (ret) @@ -87,6 +97,13 @@ nouveau_dma_init(struct nouveau_channel *chan) BEGIN_RING(chan, NvSubM2MF, NV_MEMORY_TO_MEMORY_FORMAT_DMA_NOTIFY, 1); OUT_RING(chan, NvNotify0); + /* Initialise NV_SW */ + ret = RING_SPACE(chan, 2); + if (ret) + return ret; + BEGIN_RING(chan, NvSubSw, 0, 1); + OUT_RING(chan, NvSw); + /* Sit back and pray the channel works.. */ FIRE_RING(chan); diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.h b/drivers/gpu/drm/nouveau/nouveau_dma.h index 04e85d8f757e..dabfd655f93e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dma.h +++ b/drivers/gpu/drm/nouveau/nouveau_dma.h @@ -46,10 +46,11 @@ /* Hardcoded object assignments to subchannels (subchannel id). */ enum { NvSubM2MF = 0, - NvSub2D = 1, - NvSubCtxSurf2D = 1, - NvSubGdiRect = 2, - NvSubImageBlit = 3 + NvSubSw = 1, + NvSub2D = 2, + NvSubCtxSurf2D = 2, + NvSubGdiRect = 3, + NvSubImageBlit = 4 }; /* Object handles. */ @@ -67,6 +68,7 @@ enum { NvClipRect = 0x8000000b, NvGdiRect = 0x8000000c, NvImageBlit = 0x8000000d, + NvSw = 0x8000000e, /* G80+ display objects */ NvEvoVRAM = 0x01000000, diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 7da88a92c83f..9181eaefe918 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -788,6 +788,8 @@ extern int nouveau_gpuobj_gart_dma_new(struct nouveau_channel *, uint32_t *o_ret); extern int nouveau_gpuobj_gr_new(struct nouveau_channel *, int class, struct nouveau_gpuobj **); +extern int nouveau_gpuobj_sw_new(struct nouveau_channel *, int class, + struct nouveau_gpuobj **); extern int nouveau_ioctl_grobj_alloc(struct drm_device *, void *data, struct drm_file *); extern int nouveau_ioctl_gpuobj_free(struct drm_device *, void *data, @@ -1330,14 +1332,14 @@ nv_two_reg_pll(struct drm_device *dev) return false; } -#define NV50_NVSW 0x0000506e -#define NV50_NVSW_DMA_SEMAPHORE 0x00000060 -#define NV50_NVSW_SEMAPHORE_OFFSET 0x00000064 -#define NV50_NVSW_SEMAPHORE_ACQUIRE 0x00000068 -#define NV50_NVSW_SEMAPHORE_RELEASE 0x0000006c -#define NV50_NVSW_DMA_VBLSEM 0x0000018c -#define NV50_NVSW_VBLSEM_OFFSET 0x00000400 -#define NV50_NVSW_VBLSEM_RELEASE_VALUE 0x00000404 -#define NV50_NVSW_VBLSEM_RELEASE 0x00000408 +#define NV_SW 0x0000506e +#define NV_SW_DMA_SEMAPHORE 0x00000060 +#define NV_SW_SEMAPHORE_OFFSET 0x00000064 +#define NV_SW_SEMAPHORE_ACQUIRE 0x00000068 +#define NV_SW_SEMAPHORE_RELEASE 0x0000006c +#define NV_SW_DMA_VBLSEM 0x0000018c +#define NV_SW_VBLSEM_OFFSET 0x00000400 +#define NV_SW_VBLSEM_RELEASE_VALUE 0x00000404 +#define NV_SW_VBLSEM_RELEASE 0x00000408 #endif /* __NOUVEAU_DRV_H__ */ diff --git a/drivers/gpu/drm/nouveau/nouveau_object.c b/drivers/gpu/drm/nouveau/nouveau_object.c index 93379bb81bea..6c2cf81716df 100644 --- a/drivers/gpu/drm/nouveau/nouveau_object.c +++ b/drivers/gpu/drm/nouveau/nouveau_object.c @@ -881,7 +881,7 @@ nouveau_gpuobj_gr_new(struct nouveau_channel *chan, int class, return 0; } -static int +int nouveau_gpuobj_sw_new(struct nouveau_channel *chan, int class, struct nouveau_gpuobj **gpuobj_ret) { diff --git a/drivers/gpu/drm/nouveau/nv04_fbcon.c b/drivers/gpu/drm/nouveau/nv04_fbcon.c index 09a31071ee58..d2d7f0838dc9 100644 --- a/drivers/gpu/drm/nouveau/nv04_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv04_fbcon.c @@ -184,6 +184,7 @@ nv04_fbcon_accel_init(struct fb_info *info) struct drm_device *dev = par->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_channel *chan = dev_priv->channel; + const int sub = NvSubCtxSurf2D; int surface_fmt, pattern_fmt, rect_fmt; int ret; @@ -247,25 +248,25 @@ nv04_fbcon_accel_init(struct fb_info *info) return 0; } - BEGIN_RING(chan, 1, 0x0000, 1); + BEGIN_RING(chan, sub, 0x0000, 1); OUT_RING(chan, NvCtxSurf2D); - BEGIN_RING(chan, 1, 0x0184, 2); + BEGIN_RING(chan, sub, 0x0184, 2); OUT_RING(chan, NvDmaFB); OUT_RING(chan, NvDmaFB); - BEGIN_RING(chan, 1, 0x0300, 4); + BEGIN_RING(chan, sub, 0x0300, 4); OUT_RING(chan, surface_fmt); OUT_RING(chan, info->fix.line_length | (info->fix.line_length << 16)); OUT_RING(chan, info->fix.smem_start - dev->mode_config.fb_base); OUT_RING(chan, info->fix.smem_start - dev->mode_config.fb_base); - BEGIN_RING(chan, 1, 0x0000, 1); + BEGIN_RING(chan, sub, 0x0000, 1); OUT_RING(chan, NvRop); - BEGIN_RING(chan, 1, 0x0300, 1); + BEGIN_RING(chan, sub, 0x0300, 1); OUT_RING(chan, 0x55); - BEGIN_RING(chan, 1, 0x0000, 1); + BEGIN_RING(chan, sub, 0x0000, 1); OUT_RING(chan, NvImagePatt); - BEGIN_RING(chan, 1, 0x0300, 8); + BEGIN_RING(chan, sub, 0x0300, 8); OUT_RING(chan, pattern_fmt); #ifdef __BIG_ENDIAN OUT_RING(chan, 2); @@ -279,9 +280,9 @@ nv04_fbcon_accel_init(struct fb_info *info) OUT_RING(chan, ~0); OUT_RING(chan, ~0); - BEGIN_RING(chan, 1, 0x0000, 1); + BEGIN_RING(chan, sub, 0x0000, 1); OUT_RING(chan, NvClipRect); - BEGIN_RING(chan, 1, 0x0300, 2); + BEGIN_RING(chan, sub, 0x0300, 2); OUT_RING(chan, 0); OUT_RING(chan, (info->var.yres_virtual << 16) | info->var.xres_virtual); From a5027ccd3c1abe190d2b84a2d7e40d5f099e48a7 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sat, 26 Dec 2009 02:09:36 +0100 Subject: [PATCH 0633/1626] drm/nouveau: Use the software object for fencing. This should avoid a race condition on nv0x, if we're doing it with actual PGRAPH objects and a there's a fence within the FIFO DMA fetch area when a context switch kicks in. In that case we get an ILLEGAL_MTHD interrupt as expected, but the values in PGRAPH_TRAPPED_ADDR aren't calculated correctly and they're almost useless (e.g. you can see ILLEGAL_MTHDs for the now inactive channel, with a wrong offset/data pair). Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nouveau_fence.c | 2 +- drivers/gpu/drm/nouveau/nv04_graph.c | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c index dacac9a0842a..faddf53ff9ed 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fence.c +++ b/drivers/gpu/drm/nouveau/nouveau_fence.c @@ -142,7 +142,7 @@ nouveau_fence_emit(struct nouveau_fence *fence) list_add_tail(&fence->entry, &chan->fence.pending); spin_unlock_irqrestore(&chan->fence.lock, flags); - BEGIN_RING(chan, NvSubM2MF, USE_REFCNT ? 0x0050 : 0x0150, 1); + BEGIN_RING(chan, NvSubSw, USE_REFCNT ? 0x0050 : 0x0150, 1); OUT_RING(chan, fence->sequence); FIRE_RING(chan); diff --git a/drivers/gpu/drm/nouveau/nv04_graph.c b/drivers/gpu/drm/nouveau/nv04_graph.c index d561d773c0f4..82c77f9d4695 100644 --- a/drivers/gpu/drm/nouveau/nv04_graph.c +++ b/drivers/gpu/drm/nouveau/nv04_graph.c @@ -547,7 +547,7 @@ nv04_graph_mthd_set_operation(struct nouveau_channel *chan, int grclass, return 0; } -static struct nouveau_pgraph_object_method nv04_graph_mthds_m2mf[] = { +static struct nouveau_pgraph_object_method nv04_graph_mthds_sw[] = { { 0x0150, nv04_graph_mthd_set_ref }, {} }; @@ -558,7 +558,7 @@ static struct nouveau_pgraph_object_method nv04_graph_mthds_set_operation[] = { }; struct nouveau_pgraph_object_class nv04_graph_grclass[] = { - { 0x0039, false, nv04_graph_mthds_m2mf }, + { 0x0039, false, NULL }, { 0x004a, false, nv04_graph_mthds_set_operation }, /* gdirect */ { 0x005f, false, nv04_graph_mthds_set_operation }, /* imageblit */ { 0x0061, false, nv04_graph_mthds_set_operation }, /* ifc */ @@ -574,6 +574,7 @@ struct nouveau_pgraph_object_class nv04_graph_grclass[] = { { 0x0053, false, NULL }, /* surf3d */ { 0x0054, false, NULL }, /* tex_tri */ { 0x0055, false, NULL }, /* multitex_tri */ + { 0x506e, true, nv04_graph_mthds_sw }, {} }; From ea911a1cf4f9c5bef18ff399ee2e2ec77792b650 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sat, 26 Dec 2009 14:39:46 +0100 Subject: [PATCH 0634/1626] drm/nv04: Context switching fixes. Signed-off-by: Francisco Jerez --- drivers/gpu/drm/nouveau/nv04_graph.c | 152 ++++++++++++++------------- 1 file changed, 78 insertions(+), 74 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nv04_graph.c b/drivers/gpu/drm/nouveau/nv04_graph.c index 82c77f9d4695..98f3b40318d4 100644 --- a/drivers/gpu/drm/nouveau/nv04_graph.c +++ b/drivers/gpu/drm/nouveau/nv04_graph.c @@ -28,6 +28,10 @@ #include "nouveau_drv.h" static uint32_t nv04_graph_ctx_regs[] = { + 0x0040053c, + 0x00400544, + 0x00400540, + 0x00400548, NV04_PGRAPH_CTX_SWITCH1, NV04_PGRAPH_CTX_SWITCH2, NV04_PGRAPH_CTX_SWITCH3, @@ -102,69 +106,69 @@ static uint32_t nv04_graph_ctx_regs[] = { NV04_PGRAPH_PATT_COLOR0, NV04_PGRAPH_PATT_COLOR1, NV04_PGRAPH_PATT_COLORRAM+0x00, - NV04_PGRAPH_PATT_COLORRAM+0x01, - NV04_PGRAPH_PATT_COLORRAM+0x02, - NV04_PGRAPH_PATT_COLORRAM+0x03, NV04_PGRAPH_PATT_COLORRAM+0x04, - NV04_PGRAPH_PATT_COLORRAM+0x05, - NV04_PGRAPH_PATT_COLORRAM+0x06, - NV04_PGRAPH_PATT_COLORRAM+0x07, NV04_PGRAPH_PATT_COLORRAM+0x08, - NV04_PGRAPH_PATT_COLORRAM+0x09, - NV04_PGRAPH_PATT_COLORRAM+0x0A, - NV04_PGRAPH_PATT_COLORRAM+0x0B, - NV04_PGRAPH_PATT_COLORRAM+0x0C, - NV04_PGRAPH_PATT_COLORRAM+0x0D, - NV04_PGRAPH_PATT_COLORRAM+0x0E, - NV04_PGRAPH_PATT_COLORRAM+0x0F, + NV04_PGRAPH_PATT_COLORRAM+0x0c, NV04_PGRAPH_PATT_COLORRAM+0x10, - NV04_PGRAPH_PATT_COLORRAM+0x11, - NV04_PGRAPH_PATT_COLORRAM+0x12, - NV04_PGRAPH_PATT_COLORRAM+0x13, NV04_PGRAPH_PATT_COLORRAM+0x14, - NV04_PGRAPH_PATT_COLORRAM+0x15, - NV04_PGRAPH_PATT_COLORRAM+0x16, - NV04_PGRAPH_PATT_COLORRAM+0x17, NV04_PGRAPH_PATT_COLORRAM+0x18, - NV04_PGRAPH_PATT_COLORRAM+0x19, - NV04_PGRAPH_PATT_COLORRAM+0x1A, - NV04_PGRAPH_PATT_COLORRAM+0x1B, - NV04_PGRAPH_PATT_COLORRAM+0x1C, - NV04_PGRAPH_PATT_COLORRAM+0x1D, - NV04_PGRAPH_PATT_COLORRAM+0x1E, - NV04_PGRAPH_PATT_COLORRAM+0x1F, + NV04_PGRAPH_PATT_COLORRAM+0x1c, NV04_PGRAPH_PATT_COLORRAM+0x20, - NV04_PGRAPH_PATT_COLORRAM+0x21, - NV04_PGRAPH_PATT_COLORRAM+0x22, - NV04_PGRAPH_PATT_COLORRAM+0x23, NV04_PGRAPH_PATT_COLORRAM+0x24, - NV04_PGRAPH_PATT_COLORRAM+0x25, - NV04_PGRAPH_PATT_COLORRAM+0x26, - NV04_PGRAPH_PATT_COLORRAM+0x27, NV04_PGRAPH_PATT_COLORRAM+0x28, - NV04_PGRAPH_PATT_COLORRAM+0x29, - NV04_PGRAPH_PATT_COLORRAM+0x2A, - NV04_PGRAPH_PATT_COLORRAM+0x2B, - NV04_PGRAPH_PATT_COLORRAM+0x2C, - NV04_PGRAPH_PATT_COLORRAM+0x2D, - NV04_PGRAPH_PATT_COLORRAM+0x2E, - NV04_PGRAPH_PATT_COLORRAM+0x2F, + NV04_PGRAPH_PATT_COLORRAM+0x2c, NV04_PGRAPH_PATT_COLORRAM+0x30, - NV04_PGRAPH_PATT_COLORRAM+0x31, - NV04_PGRAPH_PATT_COLORRAM+0x32, - NV04_PGRAPH_PATT_COLORRAM+0x33, NV04_PGRAPH_PATT_COLORRAM+0x34, - NV04_PGRAPH_PATT_COLORRAM+0x35, - NV04_PGRAPH_PATT_COLORRAM+0x36, - NV04_PGRAPH_PATT_COLORRAM+0x37, NV04_PGRAPH_PATT_COLORRAM+0x38, - NV04_PGRAPH_PATT_COLORRAM+0x39, - NV04_PGRAPH_PATT_COLORRAM+0x3A, - NV04_PGRAPH_PATT_COLORRAM+0x3B, - NV04_PGRAPH_PATT_COLORRAM+0x3C, - NV04_PGRAPH_PATT_COLORRAM+0x3D, - NV04_PGRAPH_PATT_COLORRAM+0x3E, - NV04_PGRAPH_PATT_COLORRAM+0x3F, + NV04_PGRAPH_PATT_COLORRAM+0x3c, + NV04_PGRAPH_PATT_COLORRAM+0x40, + NV04_PGRAPH_PATT_COLORRAM+0x44, + NV04_PGRAPH_PATT_COLORRAM+0x48, + NV04_PGRAPH_PATT_COLORRAM+0x4c, + NV04_PGRAPH_PATT_COLORRAM+0x50, + NV04_PGRAPH_PATT_COLORRAM+0x54, + NV04_PGRAPH_PATT_COLORRAM+0x58, + NV04_PGRAPH_PATT_COLORRAM+0x5c, + NV04_PGRAPH_PATT_COLORRAM+0x60, + NV04_PGRAPH_PATT_COLORRAM+0x64, + NV04_PGRAPH_PATT_COLORRAM+0x68, + NV04_PGRAPH_PATT_COLORRAM+0x6c, + NV04_PGRAPH_PATT_COLORRAM+0x70, + NV04_PGRAPH_PATT_COLORRAM+0x74, + NV04_PGRAPH_PATT_COLORRAM+0x78, + NV04_PGRAPH_PATT_COLORRAM+0x7c, + NV04_PGRAPH_PATT_COLORRAM+0x80, + NV04_PGRAPH_PATT_COLORRAM+0x84, + NV04_PGRAPH_PATT_COLORRAM+0x88, + NV04_PGRAPH_PATT_COLORRAM+0x8c, + NV04_PGRAPH_PATT_COLORRAM+0x90, + NV04_PGRAPH_PATT_COLORRAM+0x94, + NV04_PGRAPH_PATT_COLORRAM+0x98, + NV04_PGRAPH_PATT_COLORRAM+0x9c, + NV04_PGRAPH_PATT_COLORRAM+0xa0, + NV04_PGRAPH_PATT_COLORRAM+0xa4, + NV04_PGRAPH_PATT_COLORRAM+0xa8, + NV04_PGRAPH_PATT_COLORRAM+0xac, + NV04_PGRAPH_PATT_COLORRAM+0xb0, + NV04_PGRAPH_PATT_COLORRAM+0xb4, + NV04_PGRAPH_PATT_COLORRAM+0xb8, + NV04_PGRAPH_PATT_COLORRAM+0xbc, + NV04_PGRAPH_PATT_COLORRAM+0xc0, + NV04_PGRAPH_PATT_COLORRAM+0xc4, + NV04_PGRAPH_PATT_COLORRAM+0xc8, + NV04_PGRAPH_PATT_COLORRAM+0xcc, + NV04_PGRAPH_PATT_COLORRAM+0xd0, + NV04_PGRAPH_PATT_COLORRAM+0xd4, + NV04_PGRAPH_PATT_COLORRAM+0xd8, + NV04_PGRAPH_PATT_COLORRAM+0xdc, + NV04_PGRAPH_PATT_COLORRAM+0xe0, + NV04_PGRAPH_PATT_COLORRAM+0xe4, + NV04_PGRAPH_PATT_COLORRAM+0xe8, + NV04_PGRAPH_PATT_COLORRAM+0xec, + NV04_PGRAPH_PATT_COLORRAM+0xf0, + NV04_PGRAPH_PATT_COLORRAM+0xf4, + NV04_PGRAPH_PATT_COLORRAM+0xf8, + NV04_PGRAPH_PATT_COLORRAM+0xfc, NV04_PGRAPH_PATTERN, 0x0040080c, NV04_PGRAPH_PATTERN_SHAPE, @@ -247,14 +251,6 @@ static uint32_t nv04_graph_ctx_regs[] = { 0x004004f8, 0x0040047c, 0x004004fc, - 0x0040053c, - 0x00400544, - 0x00400540, - 0x00400548, - 0x00400560, - 0x00400568, - 0x00400564, - 0x0040056c, 0x00400534, 0x00400538, 0x00400514, @@ -341,9 +337,8 @@ static uint32_t nv04_graph_ctx_regs[] = { 0x00400500, 0x00400504, NV04_PGRAPH_VALID1, - NV04_PGRAPH_VALID2 - - + NV04_PGRAPH_VALID2, + NV04_PGRAPH_DEBUG_3 }; struct graph_state { @@ -388,6 +383,18 @@ nv04_graph_context_switch(struct drm_device *dev) pgraph->fifo_access(dev, true); } +static uint32_t *ctx_reg(struct graph_state *ctx, uint32_t reg) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(nv04_graph_ctx_regs); i++) { + if (nv04_graph_ctx_regs[i] == reg) + return &ctx->nv04[i]; + } + + return NULL; +} + int nv04_graph_create_context(struct nouveau_channel *chan) { struct graph_state *pgraph_ctx; @@ -398,15 +405,8 @@ int nv04_graph_create_context(struct nouveau_channel *chan) if (pgraph_ctx == NULL) return -ENOMEM; - /* dev_priv->fifos[channel].pgraph_ctx_user = channel << 24; */ - pgraph_ctx->nv04[0] = 0x0001ffff; - /* is it really needed ??? */ -#if 0 - dev_priv->fifos[channel].pgraph_ctx[1] = - nv_rd32(dev, NV_PGRAPH_DEBUG_4); - dev_priv->fifos[channel].pgraph_ctx[2] = - nv_rd32(dev, 0x004006b0); -#endif + *ctx_reg(pgraph_ctx, NV04_PGRAPH_DEBUG_3) = 0xfad4ff31; + return 0; } @@ -429,9 +429,13 @@ int nv04_graph_load_context(struct nouveau_channel *chan) nv_wr32(dev, nv04_graph_ctx_regs[i], pgraph_ctx->nv04[i]); nv_wr32(dev, NV04_PGRAPH_CTX_CONTROL, 0x10010100); - nv_wr32(dev, NV04_PGRAPH_CTX_USER, chan->id << 24); + + tmp = nv_rd32(dev, NV04_PGRAPH_CTX_USER) & 0x00ffffff; + nv_wr32(dev, NV04_PGRAPH_CTX_USER, tmp | chan->id << 24); + tmp = nv_rd32(dev, NV04_PGRAPH_FFINTFC_ST2); nv_wr32(dev, NV04_PGRAPH_FFINTFC_ST2, tmp & 0x000fffff); + return 0; } @@ -494,7 +498,7 @@ int nv04_graph_init(struct drm_device *dev) nv_wr32(dev, NV04_PGRAPH_STATE , 0xFFFFFFFF); nv_wr32(dev, NV04_PGRAPH_CTX_CONTROL , 0x10000100); tmp = nv_rd32(dev, NV04_PGRAPH_CTX_USER) & 0x00ffffff; - tmp |= dev_priv->engine.fifo.channels << 24; + tmp |= (dev_priv->engine.fifo.channels - 1) << 24; nv_wr32(dev, NV04_PGRAPH_CTX_USER, tmp); /* These don't belong here, they're part of a per-channel context */ From 7de3643f938af910bef4c1f800176a3ebdc29502 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 4 Jan 2010 09:10:55 +1000 Subject: [PATCH 0635/1626] drm/nouveau: fix handling of fbcon colours in 8bpp Depending on the visual, the colours handed to us in fillrect() can either be an actual colour, or an index into the pseudo-palette. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv04_fbcon.c | 7 +++++-- drivers/gpu/drm/nouveau/nv50_fbcon.c | 7 +++++-- 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nv04_fbcon.c b/drivers/gpu/drm/nouveau/nv04_fbcon.c index d2d7f0838dc9..bd08a0dc9841 100644 --- a/drivers/gpu/drm/nouveau/nv04_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv04_fbcon.c @@ -62,7 +62,6 @@ nv04_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) struct drm_device *dev = par->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_channel *chan = dev_priv->channel; - uint32_t color = ((uint32_t *) info->pseudo_palette)[rect->color]; if (info->state != FBINFO_STATE_RUNNING) return; @@ -80,7 +79,11 @@ nv04_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) BEGIN_RING(chan, NvSubGdiRect, 0x02fc, 1); OUT_RING(chan, (rect->rop != ROP_COPY) ? 1 : 3); BEGIN_RING(chan, NvSubGdiRect, 0x03fc, 1); - OUT_RING(chan, color); + if (info->fix.visual == FB_VISUAL_TRUECOLOR || + info->fix.visual == FB_VISUAL_DIRECTCOLOR) + OUT_RING(chan, ((uint32_t *)info->pseudo_palette)[rect->color]); + else + OUT_RING(chan, rect->color); BEGIN_RING(chan, NvSubGdiRect, 0x0400, 2); OUT_RING(chan, (rect->dx << 16) | rect->dy); OUT_RING(chan, (rect->width << 16) | rect->height); diff --git a/drivers/gpu/drm/nouveau/nv50_fbcon.c b/drivers/gpu/drm/nouveau/nv50_fbcon.c index c966ef834853..cc34356ab0b5 100644 --- a/drivers/gpu/drm/nouveau/nv50_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv50_fbcon.c @@ -10,7 +10,6 @@ nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) struct drm_device *dev = par->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_channel *chan = dev_priv->channel; - uint32_t color = ((uint32_t *) info->pseudo_palette)[rect->color]; if (info->state != FBINFO_STATE_RUNNING) return; @@ -32,7 +31,11 @@ nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) OUT_RING(chan, 1); } BEGIN_RING(chan, NvSub2D, 0x0588, 1); - OUT_RING(chan, color); + if (info->fix.visual == FB_VISUAL_TRUECOLOR || + info->fix.visual == FB_VISUAL_DIRECTCOLOR) + OUT_RING(chan, ((uint32_t *)info->pseudo_palette)[rect->color]); + else + OUT_RING(chan, rect->color); BEGIN_RING(chan, NvSub2D, 0x0600, 4); OUT_RING(chan, rect->dx); OUT_RING(chan, rect->dy); From e9dd8e11edfff5e348f3dcfd152a70c5da921126 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 4 Jan 2010 12:53:01 +1000 Subject: [PATCH 0636/1626] drm/nouveau: remove unused nouveau_channel_idle() function Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_channel.c | 41 ----------------------- drivers/gpu/drm/nouveau/nouveau_drv.h | 1 - 2 files changed, 42 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c index 4f378b68fe7b..d1c7f8c911c7 100644 --- a/drivers/gpu/drm/nouveau/nouveau_channel.c +++ b/drivers/gpu/drm/nouveau/nouveau_channel.c @@ -235,47 +235,6 @@ nouveau_channel_alloc(struct drm_device *dev, struct nouveau_channel **chan_ret, return 0; } -int -nouveau_channel_idle(struct nouveau_channel *chan) -{ - struct drm_device *dev = chan->dev; - struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_engine *engine = &dev_priv->engine; - uint32_t caches; - int idle; - - if (!chan) { - NV_ERROR(dev, "no channel...\n"); - return 1; - } - - caches = nv_rd32(dev, NV03_PFIFO_CACHES); - nv_wr32(dev, NV03_PFIFO_CACHES, caches & ~1); - - if (engine->fifo.channel_id(dev) != chan->id) { - struct nouveau_gpuobj *ramfc = - chan->ramfc ? chan->ramfc->gpuobj : NULL; - - if (!ramfc) { - NV_ERROR(dev, "No RAMFC for channel %d\n", chan->id); - return 1; - } - - engine->instmem.prepare_access(dev, false); - if (nv_ro32(dev, ramfc, 0) != nv_ro32(dev, ramfc, 1)) - idle = 0; - else - idle = 1; - engine->instmem.finish_access(dev); - } else { - idle = (nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_GET) == - nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_PUT)); - } - - nv_wr32(dev, NV03_PFIFO_CACHES, caches); - return idle; -} - /* stops a fifo */ void nouveau_channel_free(struct nouveau_channel *chan) diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 9181eaefe918..4087a9a20ba9 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -745,7 +745,6 @@ extern int nouveau_channel_alloc(struct drm_device *dev, struct drm_file *file_priv, uint32_t fb_ctxdma, uint32_t tt_ctxdma); extern void nouveau_channel_free(struct nouveau_channel *); -extern int nouveau_channel_idle(struct nouveau_channel *chan); /* nouveau_object.c */ extern int nouveau_gpuobj_early_init(struct drm_device *); From c03ec7f91fcf20af177dbc728d518fb462bad42d Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 4 Jan 2010 19:25:09 +0100 Subject: [PATCH 0637/1626] drm/nouveau: create function for "dealing" with gpu lockup It's mostly a cleanup, but in nv50_fbcon_accel_init gpu lockup message was printed, but HWACCEL_DISBALED flag was not set. Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 15 +++++++++++---- drivers/gpu/drm/nouveau/nouveau_fbcon.h | 1 + drivers/gpu/drm/nouveau/nv04_fbcon.c | 15 +++++---------- drivers/gpu/drm/nouveau/nv50_fbcon.c | 17 +++++------------ 4 files changed, 22 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 44cbbeeb7745..0b05c869e0e7 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -64,8 +64,7 @@ nouveau_fbcon_sync(struct fb_info *info) return 0; if (RING_SPACE(chan, 4)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); return 0; } @@ -86,8 +85,7 @@ nouveau_fbcon_sync(struct fb_info *info) } if (ret) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); return 0; } @@ -380,3 +378,12 @@ nouveau_fbcon_remove(struct drm_device *dev, struct drm_framebuffer *fb) return 0; } + +void nouveau_fbcon_gpu_lockup(struct fb_info *info) +{ + struct nouveau_fbcon_par *par = info->par; + struct drm_device *dev = par->dev; + + NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); + info->flags |= FBINFO_HWACCEL_DISABLED; +} diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.h b/drivers/gpu/drm/nouveau/nouveau_fbcon.h index 8531140fedbc..462e0b87b4bd 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.h +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.h @@ -43,5 +43,6 @@ void nouveau_fbcon_zfill(struct drm_device *dev); int nv04_fbcon_accel_init(struct fb_info *info); int nv50_fbcon_accel_init(struct fb_info *info); +void nouveau_fbcon_gpu_lockup(struct fb_info *info); #endif /* __NV50_FBCON_H__ */ diff --git a/drivers/gpu/drm/nouveau/nv04_fbcon.c b/drivers/gpu/drm/nouveau/nv04_fbcon.c index bd08a0dc9841..d910873c1368 100644 --- a/drivers/gpu/drm/nouveau/nv04_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv04_fbcon.c @@ -39,8 +39,7 @@ nv04_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region) return; if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 4)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); } if (info->flags & FBINFO_HWACCEL_DISABLED) { @@ -67,8 +66,7 @@ nv04_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) return; if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 7)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); } if (info->flags & FBINFO_HWACCEL_DISABLED) { @@ -112,8 +110,7 @@ nv04_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) } if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 8)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); } if (info->flags & FBINFO_HWACCEL_DISABLED) { @@ -147,8 +144,7 @@ nv04_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) int iter_len = dsize > 128 ? 128 : dsize; if (RING_SPACE(chan, iter_len + 1)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); cfb_imageblit(info, image); return; } @@ -246,8 +242,7 @@ nv04_fbcon_accel_init(struct fb_info *info) return ret; if (RING_SPACE(chan, 49)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); return 0; } diff --git a/drivers/gpu/drm/nouveau/nv50_fbcon.c b/drivers/gpu/drm/nouveau/nv50_fbcon.c index cc34356ab0b5..e4f279ee61cf 100644 --- a/drivers/gpu/drm/nouveau/nv50_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv50_fbcon.c @@ -16,9 +16,7 @@ nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect) if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, rect->rop == ROP_COPY ? 7 : 11)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); } if (info->flags & FBINFO_HWACCEL_DISABLED) { @@ -60,9 +58,7 @@ nv50_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region) return; if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 12)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); } if (info->flags & FBINFO_HWACCEL_DISABLED) { @@ -105,8 +101,7 @@ nv50_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) } if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 11)) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); } if (info->flags & FBINFO_HWACCEL_DISABLED) { @@ -139,9 +134,7 @@ nv50_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) int push = dwords > 2047 ? 2047 : dwords; if (RING_SPACE(chan, push + 1)) { - NV_ERROR(dev, - "GPU lockup - switching to software fbcon\n"); - info->flags |= FBINFO_HWACCEL_DISABLED; + nouveau_fbcon_gpu_lockup(info); cfb_imageblit(info, image); return; } @@ -203,7 +196,7 @@ nv50_fbcon_accel_init(struct fb_info *info) ret = RING_SPACE(chan, 59); if (ret) { - NV_ERROR(dev, "GPU lockup - switching to software fbcon\n"); + nouveau_fbcon_gpu_lockup(info); return ret; } From a908b96c22883f967e4ddf5aa5b35e3b4a0629a5 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 5 Jan 2010 09:41:05 +1000 Subject: [PATCH 0638/1626] drm/nv50: restore correct cache1 get/put address on fifoctx load Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_fifo.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nv50_fifo.c b/drivers/gpu/drm/nouveau/nv50_fifo.c index b7282284f080..39caf167587d 100644 --- a/drivers/gpu/drm/nouveau/nv50_fifo.c +++ b/drivers/gpu/drm/nouveau/nv50_fifo.c @@ -384,8 +384,8 @@ nv50_fifo_load_context(struct nouveau_channel *chan) nv_wr32(dev, NV40_PFIFO_CACHE1_DATA(ptr), nv_ro32(dev, cache, (ptr * 2) + 1)); } - nv_wr32(dev, 0x3210, cnt << 2); - nv_wr32(dev, 0x3270, 0); + nv_wr32(dev, NV03_PFIFO_CACHE1_PUT, cnt << 2); + nv_wr32(dev, NV03_PFIFO_CACHE1_GET, 0); /* guessing that all the 0x34xx regs aren't on NV50 */ if (!IS_G80) { @@ -398,8 +398,6 @@ nv50_fifo_load_context(struct nouveau_channel *chan) dev_priv->engine.instmem.finish_access(dev); - nv_wr32(dev, NV03_PFIFO_CACHE1_GET, 0); - nv_wr32(dev, NV03_PFIFO_CACHE1_PUT, 0); nv_wr32(dev, NV03_PFIFO_CACHE1_PUSH1, chan->id | (1<<16)); return 0; } From 1959ca80e1f88b82c1cb7227f437910768ab0c94 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 4 Jan 2010 15:52:20 +1000 Subject: [PATCH 0639/1626] drm/nouveau: have ttm's fault handler called directly There's no good reason for us to have our own anymore, this is left over from an early port to these TTM interfaces. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_ttm.c | 30 +-------------------------- 1 file changed, 1 insertion(+), 29 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_ttm.c b/drivers/gpu/drm/nouveau/nouveau_ttm.c index 187eb84e4da5..c385d50f041b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_ttm.c +++ b/drivers/gpu/drm/nouveau/nouveau_ttm.c @@ -28,45 +28,17 @@ #include "nouveau_drv.h" -static struct vm_operations_struct nouveau_ttm_vm_ops; -static const struct vm_operations_struct *ttm_vm_ops; - -static int -nouveau_ttm_fault(struct vm_area_struct *vma, struct vm_fault *vmf) -{ - struct ttm_buffer_object *bo = vma->vm_private_data; - int ret; - - if (unlikely(bo == NULL)) - return VM_FAULT_NOPAGE; - - ret = ttm_vm_ops->fault(vma, vmf); - return ret; -} - int nouveau_ttm_mmap(struct file *filp, struct vm_area_struct *vma) { struct drm_file *file_priv = filp->private_data; struct drm_nouveau_private *dev_priv = file_priv->minor->dev->dev_private; - int ret; if (unlikely(vma->vm_pgoff < DRM_FILE_PAGE_OFFSET)) return drm_mmap(filp, vma); - ret = ttm_bo_mmap(filp, vma, &dev_priv->ttm.bdev); - if (unlikely(ret != 0)) - return ret; - - if (unlikely(ttm_vm_ops == NULL)) { - ttm_vm_ops = vma->vm_ops; - nouveau_ttm_vm_ops = *ttm_vm_ops; - nouveau_ttm_vm_ops.fault = &nouveau_ttm_fault; - } - - vma->vm_ops = &nouveau_ttm_vm_ops; - return 0; + return ttm_bo_mmap(filp, vma, &dev_priv->ttm.bdev); } static int From dc8d76cac942e7344a72ad18afb90fa46cf20bb4 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 6 Jan 2010 12:00:02 +1000 Subject: [PATCH 0640/1626] drm/nv50: prevent a possible ctxprog hang The below is mainly an educated guess at what's going on, docs would sure be handy... NVIDIA? :P It appears it's possible for a ctxprog to run even while a GPU exception is pending. The GF8 and up ctxprogs appear to have a small snippet of code which detects this, and stalls the ctxprog until it's been handled, which essentially looks like: if (r2 & 0x00008000) { r0 |= 0x80000000; while (r0 & 0x80000000) {} } I don't know of any way that flag would get cleared unless the driver intervenes (and indeed, in the cases I've seen the hang, nothing steps in to automagically clear it for us). This patch causes the driver to clear the flag during the PGRAPH IRQ handler. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_irq.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c index 370c72c968d1..919a619ca7fa 100644 --- a/drivers/gpu/drm/nouveau/nouveau_irq.c +++ b/drivers/gpu/drm/nouveau/nouveau_irq.c @@ -635,6 +635,7 @@ nv50_pgraph_irq_handler(struct drm_device *dev) if ((nv_rd32(dev, 0x400500) & isb) != isb) nv_wr32(dev, 0x400500, nv_rd32(dev, 0x400500) | isb); + nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) & ~(1 << 31)); } nv_wr32(dev, NV03_PMC_INTR_0, NV_PMC_INTR_0_PGRAPH_PENDING); From d6126c5c8b2019658aadc9754dca80a7573dbff5 Mon Sep 17 00:00:00 2001 From: Luca Barbieri Date: Wed, 6 Jan 2010 04:02:45 +0100 Subject: [PATCH 0641/1626] drm/nouveau: Fix null deref in nouveau_fence_emit due to deleted fence Currently Nouveau will unvalidate all buffers if it is forced to wait on one, and then start revalidating from the beginning. While doing so, it destroys the operation fence, causing nouveau_fence_emit to crash. This patch fixes this bug by taking the fence object out of validate_op and creating it just before emit. The fence pointer is initialized to 0 and unref'ed unconditionally. In addition to fixing the bug, this prevents its reintroduction and simplifies the code. Signed-off-by: Luca Barbieri Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_gem.c | 33 +++++++++++---------------- 1 file changed, 13 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c index 18fd8ac9fca7..2009db2426c3 100644 --- a/drivers/gpu/drm/nouveau/nouveau_gem.c +++ b/drivers/gpu/drm/nouveau/nouveau_gem.c @@ -220,7 +220,6 @@ nouveau_gem_set_domain(struct drm_gem_object *gem, uint32_t read_domains, } struct validate_op { - struct nouveau_fence *fence; struct list_head vram_list; struct list_head gart_list; struct list_head both_list; @@ -252,17 +251,11 @@ validate_fini_list(struct list_head *list, struct nouveau_fence *fence) } static void -validate_fini(struct validate_op *op, bool success) +validate_fini(struct validate_op *op, struct nouveau_fence* fence) { - struct nouveau_fence *fence = op->fence; - - if (unlikely(!success)) - op->fence = NULL; - - validate_fini_list(&op->vram_list, op->fence); - validate_fini_list(&op->gart_list, op->fence); - validate_fini_list(&op->both_list, op->fence); - nouveau_fence_unref((void *)&fence); + validate_fini_list(&op->vram_list, fence); + validate_fini_list(&op->gart_list, fence); + validate_fini_list(&op->both_list, fence); } static int @@ -420,10 +413,6 @@ nouveau_gem_pushbuf_validate(struct nouveau_channel *chan, INIT_LIST_HEAD(&op->gart_list); INIT_LIST_HEAD(&op->both_list); - ret = nouveau_fence_new(chan, &op->fence, false); - if (ret) - return ret; - if (nr_buffers == 0) return 0; @@ -541,6 +530,7 @@ nouveau_gem_ioctl_pushbuf(struct drm_device *dev, void *data, struct drm_nouveau_gem_pushbuf_bo *bo = NULL; struct nouveau_channel *chan; struct validate_op op; + struct nouveau_fence* fence = 0; uint32_t *pushbuf = NULL; int ret = 0, do_reloc = 0, i; @@ -597,7 +587,7 @@ nouveau_gem_ioctl_pushbuf(struct drm_device *dev, void *data, OUT_RINGp(chan, pushbuf, req->nr_dwords); - ret = nouveau_fence_emit(op.fence); + ret = nouveau_fence_new(chan, &fence, true); if (ret) { NV_ERROR(dev, "error fencing pushbuf: %d\n", ret); WIND_RING(chan); @@ -605,7 +595,7 @@ nouveau_gem_ioctl_pushbuf(struct drm_device *dev, void *data, } if (nouveau_gem_pushbuf_sync(chan)) { - ret = nouveau_fence_wait(op.fence, NULL, false, false); + ret = nouveau_fence_wait(fence, NULL, false, false); if (ret) { for (i = 0; i < req->nr_dwords; i++) NV_ERROR(dev, "0x%08x\n", pushbuf[i]); @@ -614,7 +604,8 @@ nouveau_gem_ioctl_pushbuf(struct drm_device *dev, void *data, } out: - validate_fini(&op, ret == 0); + validate_fini(&op, fence); + nouveau_fence_unref((void**)&fence); mutex_unlock(&dev->struct_mutex); kfree(pushbuf); kfree(bo); @@ -634,6 +625,7 @@ nouveau_gem_ioctl_pushbuf_call(struct drm_device *dev, void *data, struct drm_gem_object *gem; struct nouveau_bo *pbbo; struct validate_op op; + struct nouveau_fence* fence = 0; int i, ret = 0, do_reloc = 0; NOUVEAU_CHECK_INITIALISED_WITH_RETURN; @@ -772,7 +764,7 @@ nouveau_gem_ioctl_pushbuf_call(struct drm_device *dev, void *data, OUT_RING(chan, 0); } - ret = nouveau_fence_emit(op.fence); + ret = nouveau_fence_new(chan, &fence, true); if (ret) { NV_ERROR(dev, "error fencing pushbuf: %d\n", ret); WIND_RING(chan); @@ -780,7 +772,8 @@ nouveau_gem_ioctl_pushbuf_call(struct drm_device *dev, void *data, } out: - validate_fini(&op, ret == 0); + validate_fini(&op, fence); + nouveau_fence_unref((void**)&fence); mutex_unlock(&dev->struct_mutex); kfree(bo); From cc6e496587502057af02139931736b0b7a49f637 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 7 Jan 2010 13:47:57 +1000 Subject: [PATCH 0642/1626] drm/nv04: differentiate between nv04/nv05 Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_state.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index a6b573e89829..09b9a46dfc0e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -642,7 +642,10 @@ int nouveau_load(struct drm_device *dev, unsigned long flags) dev_priv->chipset = (reg0 & 0xff00000) >> 20; /* NV04 or NV05 */ } else if ((reg0 & 0xff00fff0) == 0x20004000) { - dev_priv->chipset = 0x04; + if (reg0 & 0x00f00000) + dev_priv->chipset = 0x05; + else + dev_priv->chipset = 0x04; } else dev_priv->chipset = 0xff; From 400f14ac4ef02b2f77c9d0e3ad7d66e2f6c8e663 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 8 Jan 2010 10:53:40 +1000 Subject: [PATCH 0643/1626] drm/nouveau: use dma.max rather than pushbuf size for checking GET validity Some upcoming G80 DMA changes will depend on this, but it's split out for bisectibility just in case it causes some unexpected issues. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.c b/drivers/gpu/drm/nouveau/nouveau_dma.c index f1fd3f2b9813..3f7f78e03d42 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dma.c +++ b/drivers/gpu/drm/nouveau/nouveau_dma.c @@ -130,7 +130,7 @@ READ_GET(struct nouveau_channel *chan, uint32_t *get) val = nvchan_rd32(chan, chan->user_get); if (val < chan->pushbuf_base || - val >= chan->pushbuf_base + chan->pushbuf_bo->bo.mem.size) { + val > chan->pushbuf_base + (chan->dma.max << 2)) { /* meaningless to dma_wait() except to know whether the * GPU has stalled or not */ From c63834e1db41b59d6c7bfb1d2a549c027a42a877 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 8 Jan 2010 10:57:39 +1000 Subject: [PATCH 0644/1626] drm/nouveau: initialise DMA tracking parameters earlier Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_channel.c | 2 ++ drivers/gpu/drm/nouveau/nouveau_dma.c | 15 +++++++++------ drivers/gpu/drm/nouveau/nouveau_drv.h | 1 + 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c index d1c7f8c911c7..343d718a9667 100644 --- a/drivers/gpu/drm/nouveau/nouveau_channel.c +++ b/drivers/gpu/drm/nouveau/nouveau_channel.c @@ -158,6 +158,8 @@ nouveau_channel_alloc(struct drm_device *dev, struct nouveau_channel **chan_ret, return ret; } + nouveau_dma_pre_init(chan); + /* Locate channel's user control regs */ if (dev_priv->card_type < NV_40) user = NV03_USER(channel); diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.c b/drivers/gpu/drm/nouveau/nouveau_dma.c index 3f7f78e03d42..7afbe8b40d51 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dma.c +++ b/drivers/gpu/drm/nouveau/nouveau_dma.c @@ -29,6 +29,15 @@ #include "nouveau_drv.h" #include "nouveau_dma.h" +void +nouveau_dma_pre_init(struct nouveau_channel *chan) +{ + chan->dma.max = (chan->pushbuf_bo->bo.mem.size >> 2) - 2; + chan->dma.put = 0; + chan->dma.cur = chan->dma.put; + chan->dma.free = chan->dma.max - chan->dma.cur; +} + int nouveau_dma_init(struct nouveau_channel *chan) { @@ -74,12 +83,6 @@ nouveau_dma_init(struct nouveau_channel *chan) return ret; } - /* Initialise DMA vars */ - chan->dma.max = (chan->pushbuf_bo->bo.mem.size >> 2) - 2; - chan->dma.put = 0; - chan->dma.cur = chan->dma.put; - chan->dma.free = chan->dma.max - chan->dma.cur; - /* Insert NOPS for NOUVEAU_DMA_SKIPS */ ret = RING_SPACE(chan, NOUVEAU_DMA_SKIPS); if (ret) diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 4087a9a20ba9..026419fe8791 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -837,6 +837,7 @@ nouveau_debugfs_channel_fini(struct nouveau_channel *chan) #endif /* nouveau_dma.c */ +extern void nouveau_dma_pre_init(struct nouveau_channel *); extern int nouveau_dma_init(struct nouveau_channel *); extern int nouveau_dma_wait(struct nouveau_channel *, int size); From 40c2298bdcc8b766a39964c44e9a74d16aa95d53 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marcin=20Ko=C5=9Bcielnicki?= Date: Sun, 10 Jan 2010 17:09:14 +0000 Subject: [PATCH 0645/1626] drm/nv04: Fix set_operation software method. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv04_graph.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv04_graph.c b/drivers/gpu/drm/nouveau/nv04_graph.c index 98f3b40318d4..e260986ea65a 100644 --- a/drivers/gpu/drm/nouveau/nv04_graph.c +++ b/drivers/gpu/drm/nouveau/nv04_graph.c @@ -537,7 +537,7 @@ nv04_graph_mthd_set_operation(struct nouveau_channel *chan, int grclass, int mthd, uint32_t data) { struct drm_device *dev = chan->dev; - uint32_t instance = nv_rd32(dev, NV04_PGRAPH_CTX_SWITCH4) & 0xffff; + uint32_t instance = (nv_rd32(dev, NV04_PGRAPH_CTX_SWITCH4) & 0xffff) << 4; int subc = (nv_rd32(dev, NV04_PGRAPH_TRAPPED_ADDR) >> 13) & 0x7; uint32_t tmp; From 3f50b0222e4c6ac59a5c4819f8be0fa500970381 Mon Sep 17 00:00:00 2001 From: Kevin Winchester Date: Tue, 17 Nov 2009 14:38:45 -0800 Subject: [PATCH 0646/1626] agp: correct missing cleanup on error in agp_add_bridge While investigating a kmemleak detected leak, I encountered the agp_add_bridge function. It appears to be responsible for freeing the agp_bridge_data in the case of a failure, but it is only doing so for some errors. Fix it to always free the bridge data if a failure condition is encountered. Signed-off-by: Kevin Winchester Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie --- drivers/char/agp/backend.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c index a56ca080e108..c3ab46da51a3 100644 --- a/drivers/char/agp/backend.c +++ b/drivers/char/agp/backend.c @@ -285,18 +285,22 @@ int agp_add_bridge(struct agp_bridge_data *bridge) { int error; - if (agp_off) - return -ENODEV; + if (agp_off) { + error = -ENODEV; + goto err_put_bridge; + } if (!bridge->dev) { printk (KERN_DEBUG PFX "Erk, registering with no pci_dev!\n"); - return -EINVAL; + error = -EINVAL; + goto err_put_bridge; } /* Grab reference on the chipset driver. */ if (!try_module_get(bridge->driver->owner)) { dev_info(&bridge->dev->dev, "can't lock chipset driver\n"); - return -EINVAL; + error = -EINVAL; + goto err_put_bridge; } error = agp_backend_initialize(bridge); @@ -326,6 +330,7 @@ frontend_err: agp_backend_cleanup(bridge); err_out: module_put(bridge->driver->owner); +err_put_bridge: agp_put_bridge(bridge); return error; } From 67fe63b0715ccfaefa0af8a6e705c5470ee5cada Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 7 Jan 2010 12:58:51 -0700 Subject: [PATCH 0647/1626] agp/hp: fixup hp agp after ACPI changes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 15b8dd53f5ffa changed the string in info->hardware_id from a static array to a pointer and added a length field. But instead of changing "sizeof(array)" to "length", we changed it to "sizeof(length)" (== 4), which corrupts the string we're trying to null-terminate. We no longer even need to null-terminate the string, but we *do* need to check whether we found a HID. If there's no HID, we used to have an empty array, but now we have a null pointer. The combination of these defects causes this oops: Unable to handle kernel NULL pointer dereference (address 0000000000000003) modprobe[895]: Oops 8804682956800 [1] ip is at zx1_gart_probe+0xd0/0xcc0 [hp_agp] http://marc.info/?l=linux-ia64&m=126264484923647&w=2 Signed-off-by: Bjorn Helgaas Reported-by: Émeric Maschino Signed-off-by: Dave Airlie --- drivers/char/agp/hp-agp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c index 9047b2714653..dc8a6f70483b 100644 --- a/drivers/char/agp/hp-agp.c +++ b/drivers/char/agp/hp-agp.c @@ -488,9 +488,8 @@ zx1_gart_probe (acpi_handle obj, u32 depth, void *context, void **ret) handle = obj; do { status = acpi_get_object_info(handle, &info); - if (ACPI_SUCCESS(status)) { + if (ACPI_SUCCESS(status) && (info->valid & ACPI_VALID_HID)) { /* TBD check _CID also */ - info->hardware_id.string[sizeof(info->hardware_id.length)-1] = '\0'; match = (strcmp(info->hardware_id.string, "HWP0001") == 0); kfree(info); if (match) { From 3d4a7882b11299104a0e74425dece2e26ac98024 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 7 Jan 2010 12:58:56 -0700 Subject: [PATCH 0648/1626] agp/hp: fail gracefully if we don't find an IOC Bail out if we don't find an enclosing IOC. Previously, if we didn't find one, we tried to set things up using garbage for the SBA/IOC register address, which causes a crash. This crash only happens if firmware supplies a defective ACPI namespace, so it doesn't fix any problems in the field. Signed-off-by: Bjorn Helgaas Signed-off-by: Dave Airlie --- drivers/char/agp/hp-agp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c index dc8a6f70483b..58752b70efea 100644 --- a/drivers/char/agp/hp-agp.c +++ b/drivers/char/agp/hp-agp.c @@ -508,6 +508,9 @@ zx1_gart_probe (acpi_handle obj, u32 depth, void *context, void **ret) handle = parent; } while (ACPI_SUCCESS(status)); + if (ACPI_FAILURE(status)) + return AE_OK; /* found no enclosing IOC */ + if (hp_zx1_setup(sba_hpa + HP_ZX1_IOC_OFFSET, lba_hpa)) return AE_OK; From e6edbdc52bc0755cbfe0721ca91d4fd87649bc13 Mon Sep 17 00:00:00 2001 From: Elliott Sales de Andrade Date: Sun, 10 Jan 2010 23:59:05 -0800 Subject: [PATCH 0649/1626] Input: i8042 - add Dritek quirk for Acer Aspire 5610. Signed-off-by: Elliott Sales de Andrade Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 64b688daf48a..2a5982e532f8 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -523,6 +523,13 @@ static const struct dmi_system_id __initconst i8042_dmi_laptop_table[] = { * have turned up in 2007 that also need this again. */ static const struct dmi_system_id __initconst i8042_dmi_dritek_table[] = { + { + /* Acer Aspire 5610 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"), + }, + }, { /* Acer Aspire 5630 */ .matches = { From ba198098a21a5dc8885fddfb308135bc2f138003 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Fri, 8 Jan 2010 13:44:49 +0000 Subject: [PATCH 0650/1626] GFS2: Use MAX_LFS_FILESIZE for meta inode size Using ~0ULL was cauing sign issues in filemap_fdatawrite_range, so use MAX_LFS_FILESIZE instead. Signed-off-by: Steven Whitehouse --- fs/gfs2/meta_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c index cb8d7a93d5ec..6f68a5f18eb8 100644 --- a/fs/gfs2/meta_io.c +++ b/fs/gfs2/meta_io.c @@ -121,7 +121,7 @@ struct inode *gfs2_aspace_get(struct gfs2_sbd *sdp) if (aspace) { mapping_set_gfp_mask(aspace->i_mapping, GFP_NOFS); aspace->i_mapping->a_ops = &aspace_aops; - aspace->i_size = ~0ULL; + aspace->i_size = MAX_LFS_FILESIZE; ip = GFS2_I(aspace); clear_bit(GIF_USER, &ip->i_flags); insert_inode_hash(aspace); From fc248a497d83f5aba9d46d7ff114c070fb2a2fa2 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 4 Jan 2010 15:23:50 +0200 Subject: [PATCH 0651/1626] OMAP: DSS2: RFBI: convert to new kfifo API Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/rfbi.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c index d0b3006ad8a5..b936495c065d 100644 --- a/drivers/video/omap2/dss/rfbi.c +++ b/drivers/video/omap2/dss/rfbi.c @@ -120,7 +120,7 @@ static struct { struct omap_dss_device *dssdev[2]; - struct kfifo *cmd_fifo; + struct kfifo cmd_fifo; spinlock_t cmd_lock; struct completion cmd_done; atomic_t cmd_fifo_full; @@ -1011,20 +1011,20 @@ static void process_cmd_fifo(void) return; while (true) { - spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); + spin_lock_irqsave(&rfbi.cmd_lock, flags); - len = __kfifo_get(rfbi.cmd_fifo, (unsigned char *)&p, + len = kfifo_out(&rfbi.cmd_fifo, (unsigned char *)&p, sizeof(struct update_param)); if (len == 0) { DSSDBG("nothing more in fifo\n"); atomic_set(&rfbi.cmd_pending, 0); - spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); + spin_unlock_irqrestore(&rfbi.cmd_lock, flags); break; } /* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/ - spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); + spin_unlock_irqrestore(&rfbi.cmd_lock, flags); BUG_ON(len != sizeof(struct update_param)); BUG_ON(p.rfbi_module > 1); @@ -1052,25 +1052,25 @@ static void rfbi_push_cmd(struct update_param *p) unsigned long flags; int available; - spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); + spin_lock_irqsave(&rfbi.cmd_lock, flags); available = RFBI_CMD_FIFO_LEN_BYTES - - __kfifo_len(rfbi.cmd_fifo); + kfifo_len(&rfbi.cmd_fifo); /* DSSDBG("%d bytes left in fifo\n", available); */ if (available < sizeof(struct update_param)) { DSSDBG("Going to wait because FIFO FULL..\n"); - spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); + spin_unlock_irqrestore(&rfbi.cmd_lock, flags); atomic_inc(&rfbi.cmd_fifo_full); wait_for_completion(&rfbi.cmd_done); /*DSSDBG("Woke up because fifo not full anymore\n");*/ continue; } - ret = __kfifo_put(rfbi.cmd_fifo, (unsigned char *)p, + ret = kfifo_in(&rfbi.cmd_fifo, (unsigned char *)p, sizeof(struct update_param)); /* DSSDBG("pushed %d bytes\n", ret);*/ - spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); + spin_unlock_irqrestore(&rfbi.cmd_lock, flags); BUG_ON(ret != sizeof(struct update_param)); @@ -1155,12 +1155,12 @@ int rfbi_init(void) { u32 rev; u32 l; + int r; spin_lock_init(&rfbi.cmd_lock); - rfbi.cmd_fifo = kfifo_alloc(RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL, - &rfbi.cmd_lock); - if (IS_ERR(rfbi.cmd_fifo)) - return -ENOMEM; + r = kfifo_alloc(&rfbi.cmd_fifo, RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL); + if (r) + return r; init_completion(&rfbi.cmd_done); atomic_set(&rfbi.cmd_fifo_full, 0); @@ -1196,7 +1196,7 @@ void rfbi_exit(void) { DSSDBG("rfbi_exit\n"); - kfifo_free(rfbi.cmd_fifo); + kfifo_free(&rfbi.cmd_fifo); iounmap(rfbi.base); } From f778a12dd33200513596a0d4d3ba4d5f09e79c09 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Wed, 16 Dec 2009 13:18:07 +0200 Subject: [PATCH 0652/1626] OMAP: OMAPFB: fix clk_get for RFBI omapfb platform device was still used to get clocks inside rfbi.c Signed-off-by: Tomi Valkeinen Tested-by: Sergey Lapin --- drivers/video/omap/dispc.c | 18 +++--------------- drivers/video/omap/omapfb.h | 2 ++ drivers/video/omap/omapfb_main.c | 18 ++++++++++++++++++ drivers/video/omap/rfbi.c | 4 ++-- 4 files changed, 25 insertions(+), 17 deletions(-) diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c index c7c6455f1fa8..e192b058a688 100644 --- a/drivers/video/omap/dispc.c +++ b/drivers/video/omap/dispc.c @@ -189,11 +189,6 @@ static struct { struct omapfb_color_key color_key; } dispc; -static struct platform_device omapdss_device = { - .name = "omapdss", - .id = -1, -}; - static void enable_lcd_clocks(int enable); static void inline dispc_write_reg(int idx, u32 val) @@ -920,20 +915,20 @@ static irqreturn_t omap_dispc_irq_handler(int irq, void *dev) static int get_dss_clocks(void) { - dispc.dss_ick = clk_get(&omapdss_device.dev, "ick"); + dispc.dss_ick = clk_get(&dispc.fbdev->dssdev->dev, "ick"); if (IS_ERR(dispc.dss_ick)) { dev_err(dispc.fbdev->dev, "can't get ick\n"); return PTR_ERR(dispc.dss_ick); } - dispc.dss1_fck = clk_get(&omapdss_device.dev, "dss1_fck"); + dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss1_fck"); if (IS_ERR(dispc.dss1_fck)) { dev_err(dispc.fbdev->dev, "can't get dss1_fck\n"); clk_put(dispc.dss_ick); return PTR_ERR(dispc.dss1_fck); } - dispc.dss_54m_fck = clk_get(&omapdss_device.dev, "tv_fck"); + dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "tv_fck"); if (IS_ERR(dispc.dss_54m_fck)) { dev_err(dispc.fbdev->dev, "can't get tv_fck\n"); clk_put(dispc.dss_ick); @@ -1385,12 +1380,6 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode, int skip_init = 0; int i; - r = platform_device_register(&omapdss_device); - if (r) { - dev_err(fbdev->dev, "can't register omapdss device\n"); - return r; - } - memset(&dispc, 0, sizeof(dispc)); dispc.base = ioremap(DISPC_BASE, SZ_1K); @@ -1534,7 +1523,6 @@ static void omap_dispc_cleanup(void) free_irq(INT_24XX_DSS_IRQ, dispc.fbdev); put_dss_clocks(); iounmap(dispc.base); - platform_device_unregister(&omapdss_device); } const struct lcd_ctrl omap2_int_ctrl = { diff --git a/drivers/video/omap/omapfb.h b/drivers/video/omap/omapfb.h index 46e4714014e8..af3c9e571ec3 100644 --- a/drivers/video/omap/omapfb.h +++ b/drivers/video/omap/omapfb.h @@ -203,6 +203,8 @@ struct omapfb_device { struct omapfb_mem_desc mem_desc; struct fb_info *fb_info[OMAPFB_PLANE_NUM]; + + struct platform_device *dssdev; /* dummy dev for clocks */ }; #ifdef CONFIG_ARCH_OMAP1 diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index c7f59a5ccdbc..f74aec91aee0 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -83,6 +83,12 @@ static struct caps_table_struct color_caps[] = { { 1 << OMAPFB_COLOR_YUY422, "YUY422", }, }; +/* dummy device for clocks */ +static struct platform_device omapdss_device = { + .name = "omapdss", + .id = -1, +}; + /* * --------------------------------------------------------------------------- * LCD panel @@ -1700,6 +1706,7 @@ static int omapfb_do_probe(struct platform_device *pdev, fbdev->dev = &pdev->dev; fbdev->panel = panel; + fbdev->dssdev = &omapdss_device; platform_set_drvdata(pdev, fbdev); mutex_init(&fbdev->rqueue_mutex); @@ -1814,8 +1821,16 @@ cleanup: static int omapfb_probe(struct platform_device *pdev) { + int r; + BUG_ON(fbdev_pdev != NULL); + r = platform_device_register(&omapdss_device); + if (r) { + dev_err(&pdev->dev, "can't register omapdss device\n"); + return r; + } + /* Delay actual initialization until the LCD is registered */ fbdev_pdev = pdev; if (fbdev_panel != NULL) @@ -1843,6 +1858,9 @@ static int omapfb_remove(struct platform_device *pdev) fbdev->state = OMAPFB_DISABLED; omapfb_free_resources(fbdev, saved_state); + platform_device_unregister(&omapdss_device); + fbdev->dssdev = NULL; + return 0; } diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c index fed7b1bda19c..1162603c72e5 100644 --- a/drivers/video/omap/rfbi.c +++ b/drivers/video/omap/rfbi.c @@ -83,13 +83,13 @@ static inline u32 rfbi_read_reg(int idx) static int rfbi_get_clocks(void) { - rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "ick"); + rfbi.dss_ick = clk_get(&dispc.fbdev->dssdev->dev, "ick"); if (IS_ERR(rfbi.dss_ick)) { dev_err(rfbi.fbdev->dev, "can't get ick\n"); return PTR_ERR(rfbi.dss_ick); } - rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck"); + rfbi.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss1_fck"); if (IS_ERR(rfbi.dss1_fck)) { dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n"); clk_put(rfbi.dss_ick); From b64a5a1200e7ac91ac0dff71b0cfbc3ae19de944 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 7 Jan 2010 11:56:14 +0200 Subject: [PATCH 0653/1626] OMAP: OMAPFB: add dummy release function for omapdss This should fix: WARNING: at drivers/base/core.c:131 device_release+0x68/0x7c() Device 'omapdss' does not have a release() function, it is broken and must be fixed. Signed-off-by: Tomi Valkeinen --- drivers/video/omap/omapfb_main.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index f74aec91aee0..2c4f470fa086 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -83,10 +83,17 @@ static struct caps_table_struct color_caps[] = { { 1 << OMAPFB_COLOR_YUY422, "YUY422", }, }; +static void omapdss_release(struct device *dev) +{ +} + /* dummy device for clocks */ static struct platform_device omapdss_device = { .name = "omapdss", .id = -1, + .dev = { + .release = omapdss_release, + }, }; /* From 3043c10a7e6a133dd79636d6ec4f650a6b2848ae Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 7 Jan 2010 13:06:51 +0200 Subject: [PATCH 0654/1626] MAINTAINERS: change omapfb maintainer Signed-off-by: Tomi Valkeinen Acked-by: Imre Deak --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 66f5f7dab285..8d2fceeaa2b6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3949,7 +3949,7 @@ S: Maintained F: sound/soc/omap/ OMAP FRAMEBUFFER SUPPORT -M: Imre Deak +M: Tomi Valkeinen L: linux-fbdev@vger.kernel.org L: linux-omap@vger.kernel.org S: Maintained From 05b5d898235401c489c68e1f3bc5706a29ad5713 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 6 Jan 2010 18:03:36 +0100 Subject: [PATCH 0655/1626] quota: Fix dquot_transfer for filesystems different from ext4 Commit fd8fbfc1 modified the way we find amount of reserved space belonging to an inode. The amount of reserved space is checked from dquot_transfer and thus inode_reserved_space gets called even for filesystems that don't provide get_reserved_space callback which results in a BUG. Fix the problem by checking get_reserved_space callback and return 0 if the filesystem does not provide it. CC: Dmitry Monakhov Signed-off-by: Jan Kara --- fs/quota/dquot.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index dea86abdf2e7..3fc62b097bed 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -1377,6 +1377,9 @@ static void inode_sub_rsv_space(struct inode *inode, qsize_t number) static qsize_t inode_get_rsv_space(struct inode *inode) { qsize_t ret; + + if (!inode->i_sb->dq_op->get_reserved_space) + return 0; spin_lock(&inode->i_lock); ret = *inode_reserved_space(inode); spin_unlock(&inode->i_lock); From 676eec0daf87614eadbcd82d3876b09b65e1ddf9 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 7 Jan 2010 13:18:04 +0200 Subject: [PATCH 0656/1626] MAINTAINERS: Combine DSS2 and OMAPFB2 into one entry There isn't really any reason to divide those. Signed-off-by: Tomi Valkeinen --- MAINTAINERS | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 8d2fceeaa2b6..b888cd6696f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3955,23 +3955,14 @@ L: linux-omap@vger.kernel.org S: Maintained F: drivers/video/omap/ -OMAP DISPLAY SUBSYSTEM SUPPORT (DSS2) +OMAP DISPLAY SUBSYSTEM and FRAMEBUFFER SUPPORT (DSS2) M: Tomi Valkeinen L: linux-omap@vger.kernel.org -L: linux-fbdev@vger.kernel.org (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained -F: drivers/video/omap2/dss/ -F: drivers/video/omap2/vrfb.c -F: drivers/video/omap2/vram.c +F: drivers/video/omap2/ F: Documentation/arm/OMAP/DSS -OMAP FRAMEBUFFER SUPPORT (FOR DSS2) -M: Tomi Valkeinen -L: linux-omap@vger.kernel.org -L: linux-fbdev@vger.kernel.org (moderated for non-subscribers) -S: Maintained -F: drivers/video/omap2/omapfb/ - OMAP MMC SUPPORT M: Jarkko Lavinen L: linux-omap@vger.kernel.org From 5c18df85d731196f40784492d36d0baefdedf15a Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Mon, 4 Jan 2010 15:34:14 +0100 Subject: [PATCH 0657/1626] OMAP: DSS2: Fix compile warning Signed-off-by: Vaibhav Hiremath Acked-by: Tomi Valkeinen --- drivers/video/omap2/dss/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c index dbb0ce243f0c..82918eec6d2e 100644 --- a/drivers/video/omap2/dss/core.c +++ b/drivers/video/omap2/dss/core.c @@ -124,6 +124,7 @@ static void restore_all_ctx(void) dss_clk_disable_all_no_ctx(); } +#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) /* CLOCKS */ static void core_dump_clocks(struct seq_file *s) { @@ -149,6 +150,7 @@ static void core_dump_clocks(struct seq_file *s) clocks[i]->usecount); } } +#endif /* defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) */ static int dss_get_clock(struct clk **clock, const char *clk_name) { From 7f000dd4542fcc1a69b429c0af6c6d961d7fb912 Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Tue, 22 Dec 2009 09:34:49 +0100 Subject: [PATCH 0658/1626] video/omap: add __init/__exit macros to drivers/video/omap/lcd_htcherald.c Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of drivers/video/omap/lcd_htcherald.c Please have a look at the small patch and either pull it through your tree, or please ack' it so Jiri can pull it through the trivial tree. Patch against linux-next-tree, 22. Dez 08:38:18 CET 2009 but also present in linus tree. Signed-off-by: Peter Huewe Acked-by: Tony Lindgren --- drivers/video/omap/lcd_htcherald.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/omap/lcd_htcherald.c b/drivers/video/omap/lcd_htcherald.c index a9007c5d1fad..4802419da83b 100644 --- a/drivers/video/omap/lcd_htcherald.c +++ b/drivers/video/omap/lcd_htcherald.c @@ -115,12 +115,12 @@ struct platform_driver htcherald_panel_driver = { }, }; -static int htcherald_panel_drv_init(void) +static int __init htcherald_panel_drv_init(void) { return platform_driver_register(&htcherald_panel_driver); } -static void htcherald_panel_drv_cleanup(void) +static void __exit htcherald_panel_drv_cleanup(void) { platform_driver_unregister(&htcherald_panel_driver); } From f3a82d11d478a9eb5ff0cfa83796f0ba8149d841 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 7 Jan 2010 13:37:30 +0200 Subject: [PATCH 0659/1626] OMAP: DSS2: OMAPFB: fix omapfb_free_fbmem() Fixes bug causing VRFB memory area to be released twice. Signed-off-by: Tomi Valkeinen Reported-by: Eino-Ville Talvala --- drivers/video/omap2/omapfb/omapfb-main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c index ef299839858a..e61a75c31358 100644 --- a/drivers/video/omap2/omapfb/omapfb-main.c +++ b/drivers/video/omap2/omapfb/omapfb-main.c @@ -1311,6 +1311,7 @@ static void omapfb_free_fbmem(struct fb_info *fbi) if (rg->vrfb.vaddr[0]) { iounmap(rg->vrfb.vaddr[0]); omap_vrfb_release_ctx(&rg->vrfb); + rg->vrfb.vaddr[0] = NULL; } } From 24be78b32f0a6e14aead3eac89d768a361b091b3 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 7 Jan 2010 14:19:48 +0200 Subject: [PATCH 0660/1626] OMAP: DSS2: Make check-delay-loops consistent Loops checking for certain condition were rather inconsistent. Signed-off-by: Tomi Valkeinen Reported-by: Juha Leppanen --- drivers/video/omap2/dss/dsi.c | 14 +++++++------- drivers/video/omap2/dss/dss.c | 6 +++--- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index e32a53c0889f..6122178f5f85 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -828,12 +828,12 @@ static int dsi_pll_power(enum dsi_pll_power_state state) /* PLL_PWR_STATUS */ while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) { - udelay(1); - if (t++ > 1000) { + if (++t > 1000) { DSSERR("Failed to set DSI PLL power mode to %d\n", state); return -ENODEV; } + udelay(1); } return 0; @@ -1441,12 +1441,12 @@ static int dsi_complexio_power(enum dsi_complexio_power_state state) /* PWR_STATUS */ while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) { - udelay(1); - if (t++ > 1000) { + if (++t > 1000) { DSSERR("failed to set complexio power state to " "%d\n", state); return -ENODEV; } + udelay(1); } return 0; @@ -1646,10 +1646,10 @@ static void dsi_complexio_uninit(void) static int _dsi_wait_reset(void) { - int i = 0; + int t = 0; while (REG_GET(DSI_SYSSTATUS, 0, 0) == 0) { - if (i++ > 5) { + if (++t > 5) { DSSERR("soft reset failed\n"); return -ENODEV; } @@ -2706,7 +2706,6 @@ static int dsi_update_screen_l4(struct omap_dss_device *dssdev, /* using fifo not empty */ /* TX_FIFO_NOT_EMPTY */ while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { - udelay(1); fifo_stalls++; if (fifo_stalls > 0xfffff) { DSSERR("fifo stalls overflow, pixels left %d\n", @@ -2714,6 +2713,7 @@ static int dsi_update_screen_l4(struct omap_dss_device *dssdev, dsi_if_enable(0); return -EIO; } + udelay(1); } #elif 1 /* using fifo emptiness */ diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c index 9b05ee65a15d..0a26b7d84d41 100644 --- a/drivers/video/omap2/dss/dss.c +++ b/drivers/video/omap2/dss/dss.c @@ -467,14 +467,14 @@ static irqreturn_t dss_irq_handler_omap3(int irq, void *arg) static int _omap_dss_wait_reset(void) { - unsigned timeout = 1000; + int t = 0; while (REG_GET(DSS_SYSSTATUS, 0, 0) == 0) { - udelay(1); - if (!--timeout) { + if (++t > 1000) { DSSERR("soft reset failed\n"); return -ENODEV; } + udelay(1); } return 0; From fe0b393f2c0a0d23a9bc9ed7dc51a1ee511098bd Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 11 Jan 2010 03:21:47 -0500 Subject: [PATCH 0661/1626] block: Correct handling of bottom device misaligment The top device misalignment flag would not be set if the added bottom device was already misaligned as opposed to causing a stacking failure. Also massage the reporting so that an error is only returned if adding the bottom device caused the misalignment. I.e. don't return an error if the top is already flagged as misaligned. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- block/blk-settings.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/block/blk-settings.c b/block/blk-settings.c index d52d4adc440b..127f82551855 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -528,7 +528,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, sector_t offset) { sector_t alignment; - unsigned int top, bottom; + unsigned int top, bottom, ret = 0; t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors); t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors); @@ -546,6 +546,8 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, t->max_segment_size = min_not_zero(t->max_segment_size, b->max_segment_size); + t->misaligned |= b->misaligned; + alignment = queue_limit_alignment_offset(b, offset); /* Bottom device has different alignment. Check that it is @@ -558,8 +560,10 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, bottom = max(b->physical_block_size, b->io_min) + alignment; /* Verify that top and bottom intervals line up */ - if (max(top, bottom) & (min(top, bottom) - 1)) + if (max(top, bottom) & (min(top, bottom) - 1)) { t->misaligned = 1; + ret = -1; + } } t->logical_block_size = max(t->logical_block_size, @@ -578,18 +582,21 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, if (t->physical_block_size & (t->logical_block_size - 1)) { t->physical_block_size = t->logical_block_size; t->misaligned = 1; + ret = -1; } /* Minimum I/O a multiple of the physical block size? */ if (t->io_min & (t->physical_block_size - 1)) { t->io_min = t->physical_block_size; t->misaligned = 1; + ret = -1; } /* Optimal I/O a multiple of the physical block size? */ if (t->io_opt & (t->physical_block_size - 1)) { t->io_opt = 0; t->misaligned = 1; + ret = -1; } /* Find lowest common alignment_offset */ @@ -597,8 +604,10 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, & (max(t->physical_block_size, t->io_min) - 1); /* Verify that new alignment_offset is on a logical block boundary */ - if (t->alignment_offset & (t->logical_block_size - 1)) + if (t->alignment_offset & (t->logical_block_size - 1)) { t->misaligned = 1; + ret = -1; + } /* Discard alignment and granularity */ if (b->discard_granularity) { @@ -626,7 +635,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, (t->discard_granularity - 1); } - return t->misaligned ? -1 : 0; + return ret; } EXPORT_SYMBOL(blk_stack_limits); From dd3d145d49c5816b79acc6761ebbd842bc50b0ee Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 11 Jan 2010 03:21:48 -0500 Subject: [PATCH 0662/1626] block: Fix discard alignment calculation and printing Discard alignment reporting for partitions was incorrect. Update to match the algorithm used elsewhere. The alignment can be negative (misaligned). Fix format string accordingly. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- block/genhd.c | 2 +- include/linux/blkdev.h | 7 +++++-- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/block/genhd.c b/block/genhd.c index b11a4ad7d571..d13ba76a169c 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -867,7 +867,7 @@ static ssize_t disk_discard_alignment_show(struct device *dev, { struct gendisk *disk = dev_to_disk(dev); - return sprintf(buf, "%u\n", queue_discard_alignment(disk->queue)); + return sprintf(buf, "%d\n", queue_discard_alignment(disk->queue)); } static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9b98173a8184..a41bcc8e140f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1148,8 +1148,11 @@ static inline int queue_discard_alignment(struct request_queue *q) static inline int queue_sector_discard_alignment(struct request_queue *q, sector_t sector) { - return ((sector << 9) - q->limits.discard_alignment) - & (q->limits.discard_granularity - 1); + struct queue_limits *lim = &q->limits; + unsigned int alignment = (sector << 9) & (lim->discard_granularity - 1); + + return (lim->discard_granularity + lim->discard_alignment - alignment) + & (lim->discard_granularity - 1); } static inline unsigned int queue_discard_zeroes_data(struct request_queue *q) From 17be8c245054b9c7786545af3ba3ca4e54cd4ad9 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 11 Jan 2010 03:21:49 -0500 Subject: [PATCH 0663/1626] block: bdev_stack_limits wrapper DM does not want to know about partition offsets. Add a partition-aware wrapper that DM can use when stacking block devices. Signed-off-by: Martin K. Petersen Acked-by: Mike Snitzer Reviewed-by: Alasdair G Kergon Signed-off-by: Jens Axboe --- block/blk-settings.c | 22 ++++++++++++++++++++++ include/linux/blkdev.h | 2 ++ 2 files changed, 24 insertions(+) diff --git a/block/blk-settings.c b/block/blk-settings.c index 127f82551855..5eeb9e0d256e 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -639,6 +639,28 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, } EXPORT_SYMBOL(blk_stack_limits); +/** + * bdev_stack_limits - adjust queue limits for stacked drivers + * @t: the stacking driver limits (top device) + * @bdev: the component block_device (bottom) + * @start: first data sector within component device + * + * Description: + * Merges queue limits for a top device and a block_device. Returns + * 0 if alignment didn't change. Returns -1 if adding the bottom + * device caused misalignment. + */ +int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev, + sector_t start) +{ + struct request_queue *bq = bdev_get_queue(bdev); + + start += get_start_sect(bdev); + + return blk_stack_limits(t, &bq->limits, start << 9); +} +EXPORT_SYMBOL(bdev_stack_limits); + /** * disk_stack_limits - adjust queue limits for stacked drivers * @disk: MD/DM gendisk (top) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index a41bcc8e140f..5c8018977efa 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -938,6 +938,8 @@ extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt); extern void blk_set_default_limits(struct queue_limits *lim); extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, sector_t offset); +extern int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev, + sector_t offset); extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev, sector_t offset); extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b); From b27d7f16d3c6c27345d4280a739809c1c2c4c0b5 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 11 Jan 2010 03:21:50 -0500 Subject: [PATCH 0664/1626] DM: Fix device mapper topology stacking Make DM use bdev_stack_limits() function so that partition offsets get taken into account when calculating alignment. Clarify stacking warnings. Also remove obsolete clearing of final alignment_offset and misalignment flag. Signed-off-by: Martin K. Petersen Signed-off-by: Mike Snitzer Cc: Alasdair G. Kergon Signed-off-by: Jens Axboe --- drivers/md/dm-table.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index be625475cf6d..4b22feb01a0c 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -503,16 +503,15 @@ int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev, return 0; } - if (blk_stack_limits(limits, &q->limits, start << 9) < 0) - DMWARN("%s: target device %s is misaligned: " + if (bdev_stack_limits(limits, bdev, start) < 0) + DMWARN("%s: adding target device %s caused an alignment inconsistency: " "physical_block_size=%u, logical_block_size=%u, " "alignment_offset=%u, start=%llu", dm_device_name(ti->table->md), bdevname(bdev, b), q->limits.physical_block_size, q->limits.logical_block_size, q->limits.alignment_offset, - (unsigned long long) start << 9); - + (unsigned long long) start << SECTOR_SHIFT); /* * Check if merge fn is supported. @@ -1026,9 +1025,9 @@ combine_limits: * for the table. */ if (blk_stack_limits(limits, &ti_limits, 0) < 0) - DMWARN("%s: target device " + DMWARN("%s: adding target device " "(start sect %llu len %llu) " - "is misaligned", + "caused an alignment inconsistency", dm_device_name(table->md), (unsigned long long) ti->begin, (unsigned long long) ti->len); @@ -1079,15 +1078,6 @@ no_integrity: void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, struct queue_limits *limits) { - /* - * Each target device in the table has a data area that should normally - * be aligned such that the DM device's alignment_offset is 0. - * FIXME: Propagate alignment_offsets up the stack and warn of - * sub-optimal or inconsistent settings. - */ - limits->alignment_offset = 0; - limits->misaligned = 0; - /* * Copy table's limits to the DM device's request_queue */ From ce289321b7dc1eb108e3df0dec872b7429ef49f7 Mon Sep 17 00:00:00 2001 From: Kirill Afonshin Date: Fri, 8 Jan 2010 22:09:59 +0300 Subject: [PATCH 0665/1626] block: removed unused as_io_context It isn't used anymore, since AS was deleted. Signed-off-by: Jens Axboe --- block/blk-ioc.c | 5 ----- include/linux/iocontext.h | 27 --------------------------- 2 files changed, 32 deletions(-) diff --git a/block/blk-ioc.c b/block/blk-ioc.c index cbdabb0dd6d7..98e6bf61b0ac 100644 --- a/block/blk-ioc.c +++ b/block/blk-ioc.c @@ -39,8 +39,6 @@ int put_io_context(struct io_context *ioc) if (atomic_long_dec_and_test(&ioc->refcount)) { rcu_read_lock(); - if (ioc->aic && ioc->aic->dtor) - ioc->aic->dtor(ioc->aic); cfq_dtor(ioc); rcu_read_unlock(); @@ -76,8 +74,6 @@ void exit_io_context(struct task_struct *task) task_unlock(task); if (atomic_dec_and_test(&ioc->nr_tasks)) { - if (ioc->aic && ioc->aic->exit) - ioc->aic->exit(ioc->aic); cfq_exit(ioc); } @@ -97,7 +93,6 @@ struct io_context *alloc_io_context(gfp_t gfp_flags, int node) ret->ioprio = 0; ret->last_waited = jiffies; /* doesn't matter... */ ret->nr_batch_requests = 0; /* because this is 0 */ - ret->aic = NULL; INIT_RADIX_TREE(&ret->radix_root, GFP_ATOMIC | __GFP_HIGH); INIT_HLIST_HEAD(&ret->cic_list); ret->ioc_data = NULL; diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index a63235996309..78ef023227d4 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -4,32 +4,6 @@ #include #include -/* - * This is the per-process anticipatory I/O scheduler state. - */ -struct as_io_context { - spinlock_t lock; - - void (*dtor)(struct as_io_context *aic); /* destructor */ - void (*exit)(struct as_io_context *aic); /* called on task exit */ - - unsigned long state; - atomic_t nr_queued; /* queued reads & sync writes */ - atomic_t nr_dispatched; /* number of requests gone to the drivers */ - - /* IO History tracking */ - /* Thinktime */ - unsigned long last_end_request; - unsigned long ttime_total; - unsigned long ttime_samples; - unsigned long ttime_mean; - /* Layout pattern */ - unsigned int seek_samples; - sector_t last_request_pos; - u64 seek_total; - sector_t seek_mean; -}; - struct cfq_queue; struct cfq_io_context { void *key; @@ -78,7 +52,6 @@ struct io_context { unsigned long last_waited; /* Time last woken after wait for request */ int nr_batch_requests; /* Number of requests left in the batch */ - struct as_io_context *aic; struct radix_tree_root radix_root; struct hlist_head cic_list; void *ioc_data; From 7af92f8754b87bc78cbfd447d5f4096b25c46682 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 6 Jan 2010 15:45:55 -0800 Subject: [PATCH 0666/1626] genhd: overlapping variable definition This fixes the sparse warning: fs/ext4/super.c:2390:40: warning: symbol 'i' shadows an earlier one fs/ext4/super.c:2368:22: originally declared here Using 'i' in a macro is dubious practice. Signed-off-by: Stephen Hemminger Signed-off-by: Jens Axboe --- include/linux/genhd.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/genhd.h b/include/linux/genhd.h index c6c0c41af35f..9717081c75ad 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -256,9 +256,9 @@ extern struct hd_struct *disk_map_sector_rcu(struct gendisk *disk, #define part_stat_read(part, field) \ ({ \ typeof((part)->dkstats->field) res = 0; \ - int i; \ - for_each_possible_cpu(i) \ - res += per_cpu_ptr((part)->dkstats, i)->field; \ + unsigned int _cpu; \ + for_each_possible_cpu(_cpu) \ + res += per_cpu_ptr((part)->dkstats, _cpu)->field; \ res; \ }) From 875feb63b9567442be73efbcc9a8470e376d6423 Mon Sep 17 00:00:00 2001 From: Divyesh Shah Date: Wed, 6 Jan 2010 18:58:20 -0800 Subject: [PATCH 0667/1626] cfq-iosched: Respect ioprio_class when preempting In cfq_should_preempt(), we currently allow some cases where a non-RT request can preempt an ongoing RT cfqq timeslice. This should not happen. Examples include: o A sync_noidle wl type non-RT request pre-empting a sync_noidle wl type cfqq on which we are idling. o Once we have per-cgroup async queues, a non-RT sync request pre-empting a RT async cfqq. Signed-off-by: Divyesh Shah Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 918c7fd9aeb1..ee130f14d1fc 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -3076,6 +3076,12 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, if (cfq_class_idle(cfqq)) return true; + /* + * Don't allow a non-RT request to preempt an ongoing RT cfqq timeslice. + */ + if (cfq_class_rt(cfqq) && !cfq_class_rt(new_cfqq)) + return false; + /* * if the new request is sync, but the currently running queue is * not, let the sync request have priority. From 23978161f90e5a3200ad6ac9b0d534911e4cbb28 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 11 Jan 2010 16:17:12 +0100 Subject: [PATCH 0668/1626] drivers/block/drbd/drbd_receiver.c: correct NULL test Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,y; statement S; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // Signed-off-by: Julia Lawall Cc: Lars Ellenberg Cc: Philipp Reisner Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/drbd/drbd_receiver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index a6d266ee7e2a..dbd451984e0d 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -3945,7 +3945,7 @@ static int drbd_do_auth(struct drbd_conf *mdev) } right_response = kmalloc(resp_size, GFP_NOIO); - if (response == NULL) { + if (right_response == NULL) { dev_err(DEV, "kmalloc of right_response failed\n"); rv = 0; goto fail; From 4c9f8be7dab831c78b5f491739fc5cd01f2efb03 Mon Sep 17 00:00:00 2001 From: Colin Tuckley Date: Mon, 11 Jan 2010 11:09:15 +0100 Subject: [PATCH 0669/1626] ARM: 5873/1: ARM: Fix the reset logic for ARM RealView boards Extend the patch from Philby John to the other "RealView" boards. Rename the constants and offsets to reflect their actual functions. Cc: Philby John Signed-off-by: Colin Tuckley Acked-by: Catalin Marinas Signed-off-by: Russell King --- .../arm/mach-realview/include/mach/board-pb1176.h | 4 ++-- arch/arm/mach-realview/include/mach/platform.h | 2 +- arch/arm/mach-realview/realview_eb.c | 15 +++++++++++++++ arch/arm/mach-realview/realview_pb1176.c | 10 ++++------ arch/arm/mach-realview/realview_pb11mp.c | 11 +++++------ arch/arm/mach-realview/realview_pba8.c | 15 +++++++++++++++ arch/arm/mach-realview/realview_pbx.c | 15 +++++++++++++++ 7 files changed, 57 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h index 34b80b7d40b8..2f5ccb298858 100644 --- a/arch/arm/mach-realview/include/mach/board-pb1176.h +++ b/arch/arm/mach-realview/include/mach/board-pb1176.h @@ -74,8 +74,8 @@ #define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ /* - * Control register SYS_RESETCTL is set to 1 to force a soft reset + * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset */ -#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL 0x0100 +#define REALVIEW_PB1176_SYS_SOFT_RESET 0x0100 #endif /* __ASM_ARCH_BOARD_PB1176_H */ diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h index 4f46bf71e752..86c0c4435a46 100644 --- a/arch/arm/mach-realview/include/mach/platform.h +++ b/arch/arm/mach-realview/include/mach/platform.h @@ -140,7 +140,7 @@ * SYS_CLD, SYS_BOOTCS */ #define REALVIEW_SYS_LOCK_LOCKED (1 << 16) -#define REALVIEW_SYS_LOCKVAL_MASK 0xA05F /* Enable write access */ +#define REALVIEW_SYS_LOCK_VAL 0xA05F /* Enable write access */ /* * REALVIEW_SYS_FLASH diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 917f8ca3abff..7d857d300558 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -381,6 +381,20 @@ static struct sys_timer realview_eb_timer = { .init = realview_eb_timer_init, }; +static void realview_eb_reset(char mode) +{ + void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); + void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); + + /* + * To reset, we hit the on-board reset register + * in the system FPGA + */ + __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); + if (core_tile_eb11mp()) + __raw_writel(0x0008, reset_ctrl); +} + static void __init realview_eb_init(void) { int i; @@ -408,6 +422,7 @@ static void __init realview_eb_init(void) #ifdef CONFIG_LEDS leds_event = realview_leds_event; #endif + realview_reset = realview_eb_reset; } MACHINE_START(REALVIEW_EB, "ARM-RealView EB") diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 7fb726d5f8b9..44392e51dd50 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -292,12 +292,10 @@ static struct sys_timer realview_pb1176_timer = { static void realview_pb1176_reset(char mode) { - void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + - REALVIEW_SYS_RESETCTL_OFFSET; - void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + - REALVIEW_SYS_LOCK_OFFSET; - __raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl); - __raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl); + void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); + void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); + __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); + __raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl); } static void realview_pb1176_fixup(struct machine_desc *mdesc, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 9bbbfc05f225..3e02731af959 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -301,17 +301,16 @@ static struct sys_timer realview_pb11mp_timer = { static void realview_pb11mp_reset(char mode) { - void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + - REALVIEW_SYS_RESETCTL_OFFSET; - unsigned int val; + void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); + void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); /* * To reset, we hit the on-board reset register * in the system FPGA */ - val = __raw_readl(hdr_ctrl); - val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR; - __raw_writel(val, hdr_ctrl); + __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); + __raw_writel(0x0000, reset_ctrl); + __raw_writel(0x0004, reset_ctrl); } static void __init realview_pb11mp_init(void) diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index fe861e96c566..fe4e25c4201a 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -272,6 +272,20 @@ static struct sys_timer realview_pba8_timer = { .init = realview_pba8_timer_init, }; +static void realview_pba8_reset(char mode) +{ + void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); + void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); + + /* + * To reset, we hit the on-board reset register + * in the system FPGA + */ + __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); + __raw_writel(0x0000, reset_ctrl); + __raw_writel(0x0004, reset_ctrl); +} + static void __init realview_pba8_init(void) { int i; @@ -291,6 +305,7 @@ static void __init realview_pba8_init(void) #ifdef CONFIG_LEDS leds_event = realview_leds_event; #endif + realview_reset = realview_pba8_reset; } MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index ec39488e2b42..a21a4b395f73 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -324,6 +324,20 @@ static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags, #endif } +static void realview_pbx_reset(char mode) +{ + void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); + void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); + + /* + * To reset, we hit the on-board reset register + * in the system FPGA + */ + __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); + __raw_writel(0x0000, reset_ctrl); + __raw_writel(0x0004, reset_ctrl); +} + static void __init realview_pbx_init(void) { int i; @@ -358,6 +372,7 @@ static void __init realview_pbx_init(void) #ifdef CONFIG_LEDS leds_event = realview_leds_event; #endif + realview_reset = realview_pbx_reset; } MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") From cc20b900be7aa8e456aff82dfcb55fb15c508962 Mon Sep 17 00:00:00 2001 From: Simon Kagstrom Date: Mon, 11 Jan 2010 15:57:24 +0100 Subject: [PATCH 0670/1626] ARM: 5874/1: serial21285: fix disable_irq-from-interrupt-handler deadlock The console hangs during bootup when disable_irq is called from the transmit interrupt handler (it will wait forever for it's "own" interrupt in synchronize_irq). Fix by using disable_irq_nosync() instead. Signed-off-by: Simon Kagstrom Signed-off-by: Russell King --- drivers/serial/21285.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index 1e3d19397a59..8681f1345056 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -58,7 +58,7 @@ static const char serial21285_name[] = "Footbridge UART"; static void serial21285_stop_tx(struct uart_port *port) { if (tx_enabled(port)) { - disable_irq(IRQ_CONTX); + disable_irq_nosync(IRQ_CONTX); tx_enabled(port) = 0; } } @@ -74,7 +74,7 @@ static void serial21285_start_tx(struct uart_port *port) static void serial21285_stop_rx(struct uart_port *port) { if (rx_enabled(port)) { - disable_irq(IRQ_CONRX); + disable_irq_nosync(IRQ_CONRX); rx_enabled(port) = 0; } } From 4b529401c5089cf33f7165607cbc2fde43357bfb Mon Sep 17 00:00:00 2001 From: Andreas Fenkart Date: Fri, 8 Jan 2010 14:42:31 -0800 Subject: [PATCH 0671/1626] mm: make totalhigh_pages unsigned long Makes it consistent with the extern declaration, used when CONFIG_HIGHMEM is set Removes redundant casts in printout messages Signed-off-by: Andreas Fenkart Acked-by: Russell King Cc: Ralf Baechle Cc: David Howells Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Chen Liqin Cc: Lennox Wu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/mm/init.c | 2 +- arch/mips/mm/init.c | 2 +- arch/mips/sgi-ip27/ip27-memory.c | 2 +- arch/mn10300/mm/init.c | 3 +-- arch/score/mm/init.c | 2 +- arch/x86/mm/init_32.c | 3 +-- include/linux/highmem.h | 2 +- 7 files changed, 7 insertions(+), 9 deletions(-) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 52c40d155672..a04ffbbbe253 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -616,7 +616,7 @@ void __init mem_init(void) "%dK data, %dK init, %luK highmem)\n", nr_free_pages() << (PAGE_SHIFT-10), codesize >> 10, datasize >> 10, initsize >> 10, - (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))); + totalhigh_pages << (PAGE_SHIFT-10)); if (PAGE_SIZE >= 16384 && num_physpages <= 128) { extern int sysctl_overcommit_memory; diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 9e8d00389eef..1651942f7feb 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -424,7 +424,7 @@ void __init mem_init(void) reservedpages << (PAGE_SHIFT-10), datasize >> 10, initsize >> 10, - (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))); + totalhigh_pages << (PAGE_SHIFT-10)); } #endif /* !CONFIG_NEED_MULTIPLE_NODES */ diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index f61c164d1e67..bc1297109cc5 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -505,5 +505,5 @@ void __init mem_init(void) (num_physpages - tmp) << (PAGE_SHIFT-10), datasize >> 10, initsize >> 10, - (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))); + totalhigh_pages << (PAGE_SHIFT-10)); } diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c index ec1420562dc7..dd27a9a35152 100644 --- a/arch/mn10300/mm/init.c +++ b/arch/mn10300/mm/init.c @@ -118,8 +118,7 @@ void __init mem_init(void) reservedpages << (PAGE_SHIFT - 10), datasize >> 10, initsize >> 10, - (unsigned long) (totalhigh_pages << (PAGE_SHIFT - 10)) - ); + totalhigh_pages << (PAGE_SHIFT - 10)); } /* diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c index 8c15b2c85d5a..dfaf458d6702 100644 --- a/arch/score/mm/init.c +++ b/arch/score/mm/init.c @@ -106,7 +106,7 @@ void __init mem_init(void) ram << (PAGE_SHIFT-10), codesize >> 10, reservedpages << (PAGE_SHIFT-10), datasize >> 10, initsize >> 10, - (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))); + totalhigh_pages << (PAGE_SHIFT-10)); } #endif /* !CONFIG_NEED_MULTIPLE_NODES */ diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index c973f8e2a6cf..9a0c258a86be 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -892,8 +892,7 @@ void __init mem_init(void) reservedpages << (PAGE_SHIFT-10), datasize >> 10, initsize >> 10, - (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)) - ); + totalhigh_pages << (PAGE_SHIFT-10)); printk(KERN_INFO "virtual kernel memory layout:\n" " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n" diff --git a/include/linux/highmem.h b/include/linux/highmem.h index 211ff4497269..ab2cc20e21a5 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -46,7 +46,7 @@ void kmap_flush_unused(void); static inline unsigned int nr_free_highpages(void) { return 0; } -#define totalhigh_pages 0 +#define totalhigh_pages 0UL #ifndef ARCH_HAS_KMAP static inline void *kmap(struct page *page) From cb5a8b2c92febbed57126e1b8416dfd7607ff03d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 8 Jan 2010 14:42:34 -0800 Subject: [PATCH 0672/1626] docs: large update to ioctl-number.txt Add many ioctl definitions to ioctl-number.txt. Fix some whitespace/formatting. Correct some filenames/paths. Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ioctl/ioctl-number.txt | 203 +++++++++++++++++++++------ 1 file changed, 159 insertions(+), 44 deletions(-) diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 947374977ca5..35cf64d4436d 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -56,10 +56,11 @@ Following this convention is good because: (5) When following the convention, the driver code can use generic code to copy the parameters between user and kernel space. -This table lists ioctls visible from user land for Linux/i386. It contains -most drivers up to 2.3.14, but I know I am missing some. +This table lists ioctls visible from user land for Linux/x86. It contains +most drivers up to 2.6.31, but I know I am missing some. There has been +no attempt to list non-X86 architectures or ioctls from drivers/staging/. -Code Seq# Include File Comments +Code Seq#(hex) Include File Comments ======================================================== 0x00 00-1F linux/fs.h conflict! 0x00 00-1F scsi/scsi_ioctl.h conflict! @@ -69,119 +70,228 @@ Code Seq# Include File Comments 0x03 all linux/hdreg.h 0x04 D2-DC linux/umsdos_fs.h Dead since 2.6.11, but don't reuse these. 0x06 all linux/lp.h -0x09 all linux/md.h +0x09 all linux/raid/md_u.h +0x10 00-0F drivers/char/s390/vmcp.h 0x12 all linux/fs.h linux/blkpg.h 0x1b all InfiniBand Subsystem 0x20 all drivers/cdrom/cm206.h 0x22 all scsi/sg.h '#' 00-3F IEEE 1394 Subsystem Block for the entire subsystem +'$' 00-0F linux/perf_counter.h, linux/perf_event.h '1' 00-1F PPS kit from Ulrich Windl +'2' 01-04 linux/i2o.h +'3' 00-0F drivers/s390/char/raw3270.h conflict! +'3' 00-1F linux/suspend_ioctls.h conflict! + and kernel/power/user.c '8' all SNP8023 advanced NIC card -'A' 00-1F linux/apm_bios.h +'@' 00-0F linux/radeonfb.h conflict! +'@' 00-0F drivers/video/aty/aty128fb.c conflict! +'A' 00-1F linux/apm_bios.h conflict! +'A' 00-0F linux/agpgart.h conflict! + and drivers/char/agp/compat_ioctl.h +'A' 00-7F sound/asound.h conflict! +'B' 00-1F linux/cciss_ioctl.h conflict! +'B' 00-0F include/linux/pmu.h conflict! 'B' C0-FF advanced bbus -'C' all linux/soundcard.h +'C' all linux/soundcard.h conflict! +'C' 01-2F linux/capi.h conflict! +'C' F0-FF drivers/net/wan/cosa.h conflict! 'D' all arch/s390/include/asm/dasd.h -'E' all linux/input.h -'F' all linux/fb.h -'H' all linux/hiddev.h -'I' all linux/isdn.h +'D' 40-5F drivers/scsi/dpt/dtpi_ioctl.h +'D' 05 drivers/scsi/pmcraid.h +'E' all linux/input.h conflict! +'E' 00-0F xen/evtchn.h conflict! +'F' all linux/fb.h conflict! +'F' 01-02 drivers/scsi/pmcraid.h conflict! +'F' 20 drivers/video/fsl-diu-fb.h conflict! +'F' 20 drivers/video/intelfb/intelfb.h conflict! +'F' 20 linux/ivtvfb.h conflict! +'F' 20 linux/matroxfb.h conflict! +'F' 20 drivers/video/aty/atyfb_base.c conflict! +'F' 00-0F video/da8xx-fb.h conflict! +'F' 80-8F linux/arcfb.h conflict! +'F' DD video/sstfb.h conflict! +'G' 00-3F drivers/misc/sgi-gru/grulib.h conflict! +'G' 00-0F linux/gigaset_dev.h conflict! +'H' 00-7F linux/hiddev.h conflict! +'H' 00-0F linux/hidraw.h conflict! +'H' 00-0F sound/asound.h conflict! +'H' 20-40 sound/asound_fm.h conflict! +'H' 80-8F sound/sfnt_info.h conflict! +'H' 10-8F sound/emu10k1.h conflict! +'H' 10-1F sound/sb16_csp.h conflict! +'H' 10-1F sound/hda_hwdep.h conflict! +'H' 40-4F sound/hdspm.h conflict! +'H' 40-4F sound/hdsp.h conflict! +'H' 90 sound/usb/usx2y/usb_stream.h +'H' C0-F0 net/bluetooth/hci.h conflict! +'H' C0-DF net/bluetooth/hidp/hidp.h conflict! +'H' C0-DF net/bluetooth/cmtp/cmtp.h conflict! +'H' C0-DF net/bluetooth/bnep/bnep.h conflict! +'I' all linux/isdn.h conflict! +'I' 00-0F drivers/isdn/divert/isdn_divert.h conflict! +'I' 40-4F linux/mISDNif.h conflict! 'J' 00-1F drivers/scsi/gdth_ioctl.h 'K' all linux/kd.h -'L' 00-1F linux/loop.h -'L' 20-2F driver/usb/misc/vstusb.h +'L' 00-1F linux/loop.h conflict! +'L' 10-1F drivers/scsi/mpt2sas/mpt2sas_ctl.h conflict! +'L' 20-2F linux/usb/vstusb.h 'L' E0-FF linux/ppdd.h encrypted disk device driver -'M' all linux/soundcard.h +'M' all linux/soundcard.h conflict! +'M' 01-16 mtd/mtd-abi.h conflict! + and drivers/mtd/mtdchar.c +'M' 01-03 drivers/scsi/megaraid/megaraid_sas.h +'M' 00-0F drivers/video/fsl-diu-fb.h conflict! 'N' 00-1F drivers/usb/scanner.h -'O' 00-02 include/mtd/ubi-user.h UBI -'P' all linux/soundcard.h +'O' 00-06 mtd/ubi-user.h UBI +'P' all linux/soundcard.h conflict! +'P' 60-6F sound/sscape_ioctl.h conflict! +'P' 00-0F drivers/usb/class/usblp.c conflict! 'Q' all linux/soundcard.h -'R' 00-1F linux/random.h +'R' 00-1F linux/random.h conflict! +'R' 01 linux/rfkill.h conflict! +'R' 01-0F media/rds.h conflict! +'R' C0-DF net/bluetooth/rfcomm.h 'S' all linux/cdrom.h conflict! 'S' 80-81 scsi/scsi_ioctl.h conflict! 'S' 82-FF scsi/scsi.h conflict! +'S' 00-7F sound/asequencer.h conflict! 'T' all linux/soundcard.h conflict! +'T' 00-AF sound/asound.h conflict! 'T' all arch/x86/include/asm/ioctls.h conflict! -'U' 00-EF linux/drivers/usb/usb.h -'V' all linux/vt.h +'T' C0-DF linux/if_tun.h conflict! +'U' all sound/asound.h conflict! +'U' 00-0F drivers/media/video/uvc/uvcvideo.h conflict! +'U' 00-CF linux/uinput.h conflict! +'U' 00-EF linux/usbdevice_fs.h +'U' C0-CF drivers/bluetooth/hci_uart.h +'V' all linux/vt.h conflict! +'V' all linux/videodev2.h conflict! +'V' C0 linux/ivtvfb.h conflict! +'V' C0 linux/ivtv.h conflict! +'V' C0 media/davinci/vpfe_capture.h conflict! +'V' C0 media/si4713.h conflict! +'V' C0-CF drivers/media/video/mxb.h conflict! 'W' 00-1F linux/watchdog.h conflict! 'W' 00-1F linux/wanrouter.h conflict! -'X' all linux/xfs_fs.h +'W' 00-3F sound/asound.h conflict! +'X' all fs/xfs/xfs_fs.h conflict! + and fs/xfs/linux-2.6/xfs_ioctl32.h + and include/linux/falloc.h + and linux/fs.h +'X' all fs/ocfs2/ocfs_fs.h conflict! +'X' 01 linux/pktcdvd.h conflict! 'Y' all linux/cyclades.h -'[' 00-07 linux/usb/usbtmc.h USB Test and Measurement Devices +'Z' 14-15 drivers/message/fusion/mptctl.h +'[' 00-07 linux/usb/tmc.h USB Test and Measurement Devices -'a' all ATM on linux +'a' all linux/atm*.h, linux/sonet.h ATM on linux -'b' 00-FF bit3 vme host bridge +'b' 00-FF conflict! bit3 vme host bridge +'b' 00-0F media/bt819.h conflict! +'c' all linux/cm4000_cs.h conflict! 'c' 00-7F linux/comstats.h conflict! 'c' 00-7F linux/coda.h conflict! -'c' 80-9F arch/s390/include/asm/chsc.h -'c' A0-AF arch/x86/include/asm/msr.h +'c' 00-1F linux/chio.h conflict! +'c' 80-9F arch/s390/include/asm/chsc.h conflict! +'c' A0-AF arch/x86/include/asm/msr.h conflict! 'd' 00-FF linux/char/drm/drm/h conflict! +'d' 02-40 pcmcia/ds.h conflict! +'d' 10-3F drivers/media/video/dabusb.h conflict! +'d' C0-CF drivers/media/video/saa7191.h conflict! 'd' F0-FF linux/digi1.h 'e' all linux/digi1.h conflict! -'e' 00-1F net/irda/irtty.h conflict! -'f' 00-1F linux/ext2_fs.h -'h' 00-7F Charon filesystem +'e' 00-1F drivers/net/irda/irtty-sir.h conflict! +'f' 00-1F linux/ext2_fs.h conflict! +'f' 00-1F linux/ext3_fs.h conflict! +'f' 00-0F fs/jfs/jfs_dinode.h conflict! +'f' 00-0F fs/ext4/ext4.h conflict! +'f' 00-0F linux/fs.h conflict! +'f' 00-0F fs/ocfs2/ocfs2_fs.h conflict! +'g' 00-0F linux/usb/gadgetfs.h +'g' 20-2F linux/usb/g_printer.h +'h' 00-7F conflict! Charon filesystem -'i' 00-3F linux/i2o.h +'h' 00-1F linux/hpet.h conflict! +'i' 00-3F linux/i2o-dev.h conflict! +'i' 0B-1F linux/ipmi.h conflict! +'i' 80-8F linux/i8k.h 'j' 00-3F linux/joystick.h +'k' 00-0F linux/spi/spidev.h conflict! +'k' 00-05 video/kyro.h conflict! 'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system 'l' 40-7F linux/udf_fs_i.h in development: -'m' 00-09 linux/mmtimer.h +'m' 00-09 linux/mmtimer.h conflict! 'm' all linux/mtio.h conflict! 'm' all linux/soundcard.h conflict! 'm' all linux/synclink.h conflict! +'m' 00-19 drivers/message/fusion/mptctl.h conflict! +'m' 00 drivers/scsi/megaraid/megaraid_ioctl.h conflict! 'm' 00-1F net/irda/irmod.h conflict! -'n' 00-7F linux/ncp_fs.h +'n' 00-7F linux/ncp_fs.h and fs/ncpfs/ioctl.c 'n' 80-8F linux/nilfs2_fs.h NILFS2 -'n' E0-FF video/matrox.h matroxfb +'n' E0-FF linux/matroxfb.h matroxfb 'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2 -'o' 00-03 include/mtd/ubi-user.h conflict! (OCFS2 and UBI overlaps) -'o' 40-41 include/mtd/ubi-user.h UBI -'o' 01-A1 include/linux/dvb/*.h DVB +'o' 00-03 mtd/ubi-user.h conflict! (OCFS2 and UBI overlaps) +'o' 40-41 mtd/ubi-user.h UBI +'o' 01-A1 linux/dvb/*.h DVB 'p' 00-0F linux/phantom.h conflict! (OpenHaptics needs this) +'p' 00-1F linux/rtc.h conflict! 'p' 00-3F linux/mc146818rtc.h conflict! 'p' 40-7F linux/nvram.h -'p' 80-9F user-space parport +'p' 80-9F linux/ppdev.h user-space parport -'p' a1-a4 linux/pps.h LinuxPPS +'p' A1-A4 linux/pps.h LinuxPPS 'q' 00-1F linux/serio.h -'q' 80-FF Internet PhoneJACK, Internet LineJACK - -'r' 00-1F linux/msdos_fs.h +'q' 80-FF linux/telephony.h Internet PhoneJACK, Internet LineJACK + linux/ixjuser.h +'r' 00-1F linux/msdos_fs.h and fs/fat/dir.c 's' all linux/cdk.h 't' 00-7F linux/if_ppp.h 't' 80-8F linux/isdn_ppp.h +'t' 90 linux/toshiba.h 'u' 00-1F linux/smb_fs.h -'v' 00-1F linux/ext2_fs.h conflict! 'v' all linux/videodev.h conflict! +'v' 00-1F linux/ext2_fs.h conflict! +'v' 00-1F linux/fs.h conflict! +'v' 00-0F linux/sonypi.h conflict! +'v' C0-CF drivers/media/video/ov511.h conflict! +'v' C0-DF media/pwc-ioctl.h conflict! +'v' C0-FF linux/meye.h conflict! +'v' C0-CF drivers/media/video/zoran/zoran.h conflict! +'v' D0-DF drivers/media/video/cpia2/cpia2dev.h conflict! 'w' all CERN SCI driver 'y' 00-1F packet based user level communications -'z' 00-3F CAN bus card +'z' 00-3F CAN bus card conflict! -'z' 40-7F CAN bus card +'z' 40-7F CAN bus card conflict! +'z' 10-4F drivers/s390/crypto/zcrypt_api.h conflict! 0x80 00-1F linux/fb.h 0x81 00-1F linux/videotext.h +0x88 00-3F media/ovcamchip.h 0x89 00-06 arch/x86/include/asm/sockios.h 0x89 0B-DF linux/sockios.h 0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range +0x89 E0-EF linux/dn.h PROTOPRIVATE range 0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range 0x8B all linux/wireless.h 0x8C 00-3F WiNRADiO driver 0x90 00 drivers/cdrom/sbpcd.h +0x92 00-0F drivers/usb/mon/mon_bin.c 0x93 60-7F linux/auto_fs.h +0x94 all fs/btrfs/ioctl.h 0x99 00-0F 537-Addinboard driver 0xA0 all linux/sdp/sdp.h Industrial Device Project @@ -192,17 +302,22 @@ Code Seq# Include File Comments 0xAB 00-1F linux/nbd.h 0xAC 00-1F linux/raw.h 0xAD 00 Netfilter device in development: - + 0xAE all linux/kvm.h Kernel-based Virtual Machine 0xB0 all RATIO devices in development: 0xB1 00-1F PPPoX +0xC0 00-0F linux/usb/iowarrior.h 0xCB 00-1F CBM serial IEC bus in development: +0xCD 01 linux/reiserfs_fs.h +0xCF 02 fs/cifs/ioctl.c +0xDB 00-0F drivers/char/mwave/mwavepub.h 0xDD 00-3F ZFCP device driver see drivers/s390/scsi/ -0xF3 00-3F video/sisfb.h sisfb (in development) +0xF3 00-3F drivers/usb/misc/sisusbvga/sisusb.h sisfb (in development) 0xF4 00-1F video/mbxfb.h mbxfb +0xFD all linux/dm-ioctl.h From e992cd9b72a18122bd5c958715623057f110793f Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Fri, 8 Jan 2010 14:42:35 -0800 Subject: [PATCH 0673/1626] kmemcheck: make bitfield annotations truly no-ops when disabled It turns out that even zero-sized struct members (int foo[0];) will affect the struct layout, causing us in particular to lose 4 bytes in struct sock. This patch fixes the regression in CONFIG_KMEMCHECK=n case. Reported-by: Eric Dumazet Signed-off-by: Vegard Nossum Acked-by: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kmemcheck.h | 112 ++++++++++++++++++++------------------ 1 file changed, 59 insertions(+), 53 deletions(-) diff --git a/include/linux/kmemcheck.h b/include/linux/kmemcheck.h index e880d4cf9e22..08d7dc4ddf40 100644 --- a/include/linux/kmemcheck.h +++ b/include/linux/kmemcheck.h @@ -36,6 +36,56 @@ int kmemcheck_hide_addr(unsigned long address); bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size); +/* + * Bitfield annotations + * + * How to use: If you have a struct using bitfields, for example + * + * struct a { + * int x:8, y:8; + * }; + * + * then this should be rewritten as + * + * struct a { + * kmemcheck_bitfield_begin(flags); + * int x:8, y:8; + * kmemcheck_bitfield_end(flags); + * }; + * + * Now the "flags_begin" and "flags_end" members may be used to refer to the + * beginning and end, respectively, of the bitfield (and things like + * &x.flags_begin is allowed). As soon as the struct is allocated, the bit- + * fields should be annotated: + * + * struct a *a = kmalloc(sizeof(struct a), GFP_KERNEL); + * kmemcheck_annotate_bitfield(a, flags); + */ +#define kmemcheck_bitfield_begin(name) \ + int name##_begin[0]; + +#define kmemcheck_bitfield_end(name) \ + int name##_end[0]; + +#define kmemcheck_annotate_bitfield(ptr, name) \ + do { \ + int _n; \ + \ + if (!ptr) \ + break; \ + \ + _n = (long) &((ptr)->name##_end) \ + - (long) &((ptr)->name##_begin); \ + MAYBE_BUILD_BUG_ON(_n < 0); \ + \ + kmemcheck_mark_initialized(&((ptr)->name##_begin), _n); \ + } while (0) + +#define kmemcheck_annotate_variable(var) \ + do { \ + kmemcheck_mark_initialized(&(var), sizeof(var)); \ + } while (0) \ + #else #define kmemcheck_enabled 0 @@ -106,60 +156,16 @@ static inline bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size) return true; } -#endif /* CONFIG_KMEMCHECK */ - -/* - * Bitfield annotations - * - * How to use: If you have a struct using bitfields, for example - * - * struct a { - * int x:8, y:8; - * }; - * - * then this should be rewritten as - * - * struct a { - * kmemcheck_bitfield_begin(flags); - * int x:8, y:8; - * kmemcheck_bitfield_end(flags); - * }; - * - * Now the "flags_begin" and "flags_end" members may be used to refer to the - * beginning and end, respectively, of the bitfield (and things like - * &x.flags_begin is allowed). As soon as the struct is allocated, the bit- - * fields should be annotated: - * - * struct a *a = kmalloc(sizeof(struct a), GFP_KERNEL); - * kmemcheck_annotate_bitfield(a, flags); - * - * Note: We provide the same definitions for both kmemcheck and non- - * kmemcheck kernels. This makes it harder to introduce accidental errors. It - * is also allowed to pass NULL pointers to kmemcheck_annotate_bitfield(). - */ -#define kmemcheck_bitfield_begin(name) \ - int name##_begin[0]; - -#define kmemcheck_bitfield_end(name) \ - int name##_end[0]; - -#define kmemcheck_annotate_bitfield(ptr, name) \ - do { \ - int _n; \ - \ - if (!ptr) \ - break; \ - \ - _n = (long) &((ptr)->name##_end) \ - - (long) &((ptr)->name##_begin); \ - MAYBE_BUILD_BUG_ON(_n < 0); \ - \ - kmemcheck_mark_initialized(&((ptr)->name##_begin), _n); \ +#define kmemcheck_bitfield_begin(name) +#define kmemcheck_bitfield_end(name) +#define kmemcheck_annotate_bitfield(ptr, name) \ + do { \ } while (0) -#define kmemcheck_annotate_variable(var) \ - do { \ - kmemcheck_mark_initialized(&(var), sizeof(var)); \ - } while (0) \ +#define kmemcheck_annotate_variable(var) \ + do { \ + } while (0) + +#endif /* CONFIG_KMEMCHECK */ #endif /* LINUX_KMEMCHECK_H */ From 42d53b4ff7d61487d18274ebdf1f70c1aef6f122 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Fri, 8 Jan 2010 14:42:36 -0800 Subject: [PATCH 0674/1626] dma-debug: allow DMA_BIDIRECTIONAL mappings to be synced with DMA_FROM_DEVICE and There is no need to perform full BIDIR sync (copying the buffers in case of swiotlb and similar schemes) if we know that the owner (CPU or device) hasn't altered the data. Addresses the false-positive reported at http://bugzilla.kernel.org/show_bug.cgi?id=14169 Signed-off-by: Krzysztof Halasa Cc: David Miller Cc: Joerg Roedel Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/dma-debug.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/lib/dma-debug.c b/lib/dma-debug.c index cf906201aecf..7d2f0b33e5a8 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -913,6 +913,9 @@ static void check_sync(struct device *dev, ref->size); } + if (entry->direction == DMA_BIDIRECTIONAL) + goto out; + if (ref->direction != entry->direction) { err_printk(dev, entry, "DMA-API: device driver syncs " "DMA memory with different direction " @@ -923,9 +926,6 @@ static void check_sync(struct device *dev, dir2name[ref->direction]); } - if (entry->direction == DMA_BIDIRECTIONAL) - goto out; - if (to_cpu && !(entry->direction == DMA_FROM_DEVICE) && !(ref->direction == DMA_TO_DEVICE)) err_printk(dev, entry, "DMA-API: device driver syncs " @@ -948,7 +948,6 @@ static void check_sync(struct device *dev, out: put_hash_bucket(bucket, &flags); - } void debug_dma_map_page(struct device *dev, struct page *page, size_t offset, From 8767ba2796a1c894e6d9524584a26a8224f0543d Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Fri, 8 Jan 2010 14:42:38 -0800 Subject: [PATCH 0675/1626] kmod: fix resource leak in call_usermodehelper_pipe() Fix resource (write-pipe file) leak in call_usermodehelper_pipe(). When call_usermodehelper_exec() fails, write-pipe file is opened and call_usermodehelper_pipe() just returns an error. Since it is hard for caller to determine whether the error occured when opening the pipe or executing the helper, the caller cannot close the pipe by themselves. I've found this resoruce leak when testing coredump. You can check how the resource leaks as below; $ echo "|nocommand" > /proc/sys/kernel/core_pattern $ ulimit -c unlimited $ while [ 1 ]; do ./segv; done &> /dev/null & $ cat /proc/meminfo (<- repeat it) where segv.c is; //----- int main () { char *p = 0; *p = 1; } //----- This patch closes write-pipe file if call_usermodehelper_exec() failed. Signed-off-by: Masami Hiramatsu Cc: Rusty Russell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/kmod.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/kernel/kmod.c b/kernel/kmod.c index 25b103190364..bf0e231d9702 100644 --- a/kernel/kmod.c +++ b/kernel/kmod.c @@ -520,13 +520,15 @@ int call_usermodehelper_pipe(char *path, char **argv, char **envp, return -ENOMEM; ret = call_usermodehelper_stdinpipe(sub_info, filp); - if (ret < 0) - goto out; + if (ret < 0) { + call_usermodehelper_freeinfo(sub_info); + return ret; + } - return call_usermodehelper_exec(sub_info, UMH_WAIT_EXEC); + ret = call_usermodehelper_exec(sub_info, UMH_WAIT_EXEC); + if (ret < 0) /* Failed to execute helper, close pipe */ + filp_close(*filp, NULL); - out: - call_usermodehelper_freeinfo(sub_info); return ret; } EXPORT_SYMBOL(call_usermodehelper_pipe); From 129182e5626972ac0df85d43a36dd46ad61c64e1 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 8 Jan 2010 14:42:39 -0800 Subject: [PATCH 0676/1626] percpu: avoid calling __pcpu_ptr_to_addr(NULL) __pcpu_ptr_to_addr() can be overridden by the architecture and might not behave well if passed a NULL pointer. So avoid calling it until we have verified that its arg is not NULL. Cc: Rusty Russell Cc: Kamalesh Babulal Acked-by: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/percpu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/mm/percpu.c b/mm/percpu.c index 442010cc91c6..083e7c91e5f6 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -1271,7 +1271,7 @@ static void pcpu_reclaim(struct work_struct *work) */ void free_percpu(void *ptr) { - void *addr = __pcpu_ptr_to_addr(ptr); + void *addr; struct pcpu_chunk *chunk; unsigned long flags; int off; @@ -1279,6 +1279,8 @@ void free_percpu(void *ptr) if (!ptr) return; + addr = __pcpu_ptr_to_addr(ptr); + spin_lock_irqsave(&pcpu_lock, flags); chunk = pcpu_chunk_addr_search(addr); From ac4c2a3bbe5db5fc570b1d0ee1e474db7cb22585 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Fri, 8 Jan 2010 14:42:40 -0800 Subject: [PATCH 0677/1626] zlib: optimize inffast when copying direct from output JFFS2 uses lesser compression ratio and inflate always ends up in "copy direct from output" case. This patch tries to optimize the direct copy procedure. Uses get_unaligned() but only in one place. The copy loop just above this one can also use this optimization, but I havn't done so as I have not tested if it is a win there too. On my MPC8321 this is about 17% faster on my JFFS2 root FS than the original. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Joakim Tjernlund Cc: Roel Kluin Cc: Richard Purdie Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/boot/Makefile | 4 ++- lib/zlib_inflate/inffast.c | 55 ++++++++++++++++++++++++++++++-------- 2 files changed, 47 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index bb2465bcb327..826a30a00f59 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -20,7 +20,7 @@ all: $(obj)/zImage BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ - -fno-strict-aliasing -Os -msoft-float -pipe \ + -fno-strict-aliasing -Os -msoft-float -pipe -D__KERNEL__\ -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \ -isystem $(shell $(CROSS32CC) -print-file-name=include) BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc @@ -34,6 +34,8 @@ BOOTCFLAGS += -fno-stack-protector endif BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) +BOOTCFLAGS += -include include/linux/autoconf.h -Iarch/powerpc/include +BOOTCFLAGS += -Iinclude DTS_FLAGS ?= -p 1024 diff --git a/lib/zlib_inflate/inffast.c b/lib/zlib_inflate/inffast.c index 8550b0c05d00..05e1559fa156 100644 --- a/lib/zlib_inflate/inffast.c +++ b/lib/zlib_inflate/inffast.c @@ -4,6 +4,8 @@ */ #include +#include +#include #include "inftrees.h" #include "inflate.h" #include "inffast.h" @@ -24,9 +26,11 @@ #ifdef POSTINC # define OFF 0 # define PUP(a) *(a)++ +# define UP_UNALIGNED(a) get_unaligned((a)++) #else # define OFF 1 # define PUP(a) *++(a) +# define UP_UNALIGNED(a) get_unaligned(++(a)) #endif /* @@ -239,18 +243,47 @@ void inflate_fast(z_streamp strm, unsigned start) } } else { + unsigned short *sout; + unsigned long loops; + from = out - dist; /* copy direct from output */ - do { /* minimum length is three */ - PUP(out) = PUP(from); - PUP(out) = PUP(from); - PUP(out) = PUP(from); - len -= 3; - } while (len > 2); - if (len) { - PUP(out) = PUP(from); - if (len > 1) - PUP(out) = PUP(from); - } + /* minimum length is three */ + /* Align out addr */ + if (!((long)(out - 1 + OFF) & 1)) { + PUP(out) = PUP(from); + len--; + } + sout = (unsigned short *)(out - OFF); + if (dist > 2) { + unsigned short *sfrom; + + sfrom = (unsigned short *)(from - OFF); + loops = len >> 1; + do + PUP(sout) = UP_UNALIGNED(sfrom); + while (--loops); + out = (unsigned char *)sout + OFF; + from = (unsigned char *)sfrom + OFF; + } else { /* dist == 1 or dist == 2 */ + unsigned short pat16; + + pat16 = *(sout-2+2*OFF); + if (dist == 1) +#if defined(__BIG_ENDIAN) + pat16 = (pat16 & 0xff) | ((pat16 & 0xff) << 8); +#elif defined(__LITTLE_ENDIAN) + pat16 = (pat16 & 0xff00) | ((pat16 & 0xff00) >> 8); +#else +#error __BIG_ENDIAN nor __LITTLE_ENDIAN is defined +#endif + loops = len >> 1; + do + PUP(sout) = pat16; + while (--loops); + out = (unsigned char *)sout + OFF; + } + if (len & 1) + PUP(out) = PUP(from); } } else if ((op & 64) == 0) { /* 2nd level distance code */ From 7dd65feb6c603e13eba501c34c662259ab38e70e Mon Sep 17 00:00:00 2001 From: Albin Tonnerre Date: Fri, 8 Jan 2010 14:42:42 -0800 Subject: [PATCH 0678/1626] lib: add support for LZO-compressed kernels This patch series adds generic support for creating and extracting LZO-compressed kernel images, as well as support for using such images on the x86 and ARM architectures, and support for creating and using LZO-compressed initrd and initramfs images. Russell King said: : Testing on a Cortex A9 model: : - lzo decompressor is 65% of the time gzip takes to decompress a kernel : - lzo kernel is 9% larger than a gzip kernel : : which I'm happy to say confirms your figures when comparing the two. : : However, when comparing your new gzip code to the old gzip code: : - new is 99% of the size of the old code : - new takes 42% of the time to decompress than the old code : : What this means is that for a proper comparison, the results get even better: : - lzo is 7.5% larger than the old gzip'd kernel image : - lzo takes 28% of the time that the old gzip code took : : So the expense seems definitely worth the effort. The only reason I : can think of ever using gzip would be if you needed the additional : compression (eg, because you have limited flash to store the image.) : : I would argue that the default for ARM should therefore be LZO. This patch: The lzo compressor is worse than gzip at compression, but faster at extraction. Here are some figures for an ARM board I'm working on: Uncompressed size: 3.24Mo gzip 1.61Mo 0.72s lzo 1.75Mo 0.48s So for a compression ratio that is still relatively close to gzip, it's much faster to extract, at least in that case. This part contains: - Makefile routine to support lzo compression - Fixes to the existing lzo compressor so that it can be used in compressed kernels - wrapper around the existing lzo1x_decompress, as it only extracts one block at a time, while we need to extract a whole file here - config dialog for kernel compression [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: cleanup] Signed-off-by: Albin Tonnerre Tested-by: Wu Zhangjin Acked-by: "H. Peter Anvin" Cc: Ingo Molnar Cc: Thomas Gleixner Tested-by: Russell King Acked-by: Russell King Cc: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/decompress/unlzo.h | 10 ++ init/Kconfig | 18 ++- lib/decompress_unlzo.c | 209 +++++++++++++++++++++++++++++++ lib/lzo/lzo1x_decompress.c | 9 +- scripts/Makefile.lib | 5 + 5 files changed, 244 insertions(+), 7 deletions(-) create mode 100644 include/linux/decompress/unlzo.h create mode 100644 lib/decompress_unlzo.c diff --git a/include/linux/decompress/unlzo.h b/include/linux/decompress/unlzo.h new file mode 100644 index 000000000000..987229752519 --- /dev/null +++ b/include/linux/decompress/unlzo.h @@ -0,0 +1,10 @@ +#ifndef DECOMPRESS_UNLZO_H +#define DECOMPRESS_UNLZO_H + +int unlzo(unsigned char *inbuf, int len, + int(*fill)(void*, unsigned int), + int(*flush)(void*, unsigned int), + unsigned char *output, + int *pos, + void(*error)(char *x)); +#endif diff --git a/init/Kconfig b/init/Kconfig index a23da9f01803..d95ca7cd5d45 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -115,10 +115,13 @@ config HAVE_KERNEL_BZIP2 config HAVE_KERNEL_LZMA bool +config HAVE_KERNEL_LZO + bool + choice prompt "Kernel compression mode" default KERNEL_GZIP - depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA + depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_LZO help The linux kernel is a kind of self-extracting executable. Several compression algorithms are available, which differ @@ -141,9 +144,8 @@ config KERNEL_GZIP bool "Gzip" depends on HAVE_KERNEL_GZIP help - The old and tried gzip compression. Its compression ratio is - the poorest among the 3 choices; however its speed (both - compression and decompression) is the fastest. + The old and tried gzip compression. It provides a good balance + between compression ratio and decompression speed. config KERNEL_BZIP2 bool "Bzip2" @@ -164,6 +166,14 @@ config KERNEL_LZMA two. Compression is slowest. The kernel size is about 33% smaller with LZMA in comparison to gzip. +config KERNEL_LZO + bool "LZO" + depends on HAVE_KERNEL_LZO + help + Its compression ratio is the poorest among the 4. The kernel + size is about about 10% bigger than gzip; however its speed + (both compression and decompression) is the fastest. + endchoice config SWAP diff --git a/lib/decompress_unlzo.c b/lib/decompress_unlzo.c new file mode 100644 index 000000000000..db521f45626e --- /dev/null +++ b/lib/decompress_unlzo.c @@ -0,0 +1,209 @@ +/* + * LZO decompressor for the Linux kernel. Code borrowed from the lzo + * implementation by Markus Franz Xaver Johannes Oberhumer. + * + * Linux kernel adaptation: + * Copyright (C) 2009 + * Albin Tonnerre, Free Electrons + * + * Original code: + * Copyright (C) 1996-2005 Markus Franz Xaver Johannes Oberhumer + * All Rights Reserved. + * + * lzop and the LZO library are free software; you can redistribute them + * and/or modify them under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Markus F.X.J. Oberhumer + * + * http://www.oberhumer.com/opensource/lzop/ + */ + +#ifdef STATIC +#include "lzo/lzo1x_decompress.c" +#else +#include +#include +#endif + +#include +#include +#include + +#include +#include + +static const unsigned char lzop_magic[] = { + 0x89, 0x4c, 0x5a, 0x4f, 0x00, 0x0d, 0x0a, 0x1a, 0x0a }; + +#define LZO_BLOCK_SIZE (256*1024l) +#define HEADER_HAS_FILTER 0x00000800L + +STATIC inline int INIT parse_header(u8 *input, u8 *skip) +{ + int l; + u8 *parse = input; + u8 level = 0; + u16 version; + + /* read magic: 9 first bits */ + for (l = 0; l < 9; l++) { + if (*parse++ != lzop_magic[l]) + return 0; + } + /* get version (2bytes), skip library version (2), + * 'need to be extracted' version (2) and + * method (1) */ + version = get_unaligned_be16(parse); + parse += 7; + if (version >= 0x0940) + level = *parse++; + if (get_unaligned_be32(parse) & HEADER_HAS_FILTER) + parse += 8; /* flags + filter info */ + else + parse += 4; /* flags */ + + /* skip mode and mtime_low */ + parse += 8; + if (version >= 0x0940) + parse += 4; /* skip mtime_high */ + + l = *parse++; + /* don't care about the file name, and skip checksum */ + parse += l + 4; + + *skip = parse - input; + return 1; +} + +STATIC inline int INIT unlzo(u8 *input, int in_len, + int (*fill) (void *, unsigned int), + int (*flush) (void *, unsigned int), + u8 *output, int *posp, + void (*error_fn) (char *x)) +{ + u8 skip = 0, r = 0; + u32 src_len, dst_len; + size_t tmp; + u8 *in_buf, *in_buf_save, *out_buf; + int obytes_processed = 0; + + set_error_fn(error_fn); + + if (output) { + out_buf = output; + } else if (!flush) { + error("NULL output pointer and no flush function provided"); + goto exit; + } else { + out_buf = malloc(LZO_BLOCK_SIZE); + if (!out_buf) { + error("Could not allocate output buffer"); + goto exit; + } + } + + if (input && fill) { + error("Both input pointer and fill function provided, don't know what to do"); + goto exit_1; + } else if (input) { + in_buf = input; + } else if (!fill || !posp) { + error("NULL input pointer and missing position pointer or fill function"); + goto exit_1; + } else { + in_buf = malloc(lzo1x_worst_compress(LZO_BLOCK_SIZE)); + if (!in_buf) { + error("Could not allocate input buffer"); + goto exit_1; + } + } + in_buf_save = in_buf; + + if (posp) + *posp = 0; + + if (fill) + fill(in_buf, lzo1x_worst_compress(LZO_BLOCK_SIZE)); + + if (!parse_header(input, &skip)) { + error("invalid header"); + goto exit_2; + } + in_buf += skip; + + if (posp) + *posp = skip; + + for (;;) { + /* read uncompressed block size */ + dst_len = get_unaligned_be32(in_buf); + in_buf += 4; + + /* exit if last block */ + if (dst_len == 0) { + if (posp) + *posp += 4; + break; + } + + if (dst_len > LZO_BLOCK_SIZE) { + error("dest len longer than block size"); + goto exit_2; + } + + /* read compressed block size, and skip block checksum info */ + src_len = get_unaligned_be32(in_buf); + in_buf += 8; + + if (src_len <= 0 || src_len > dst_len) { + error("file corrupted"); + goto exit_2; + } + + /* decompress */ + tmp = dst_len; + r = lzo1x_decompress_safe((u8 *) in_buf, src_len, + out_buf, &tmp); + + if (r != LZO_E_OK || dst_len != tmp) { + error("Compressed data violation"); + goto exit_2; + } + + obytes_processed += dst_len; + if (flush) + flush(out_buf, dst_len); + if (output) + out_buf += dst_len; + if (posp) + *posp += src_len + 12; + if (fill) { + in_buf = in_buf_save; + fill(in_buf, lzo1x_worst_compress(LZO_BLOCK_SIZE)); + } else + in_buf += src_len; + } + +exit_2: + if (!input) + free(in_buf); +exit_1: + if (!output) + free(out_buf); +exit: + return obytes_processed; +} + +#define decompress unlzo diff --git a/lib/lzo/lzo1x_decompress.c b/lib/lzo/lzo1x_decompress.c index 5dc6b29c1575..f2fd09850223 100644 --- a/lib/lzo/lzo1x_decompress.c +++ b/lib/lzo/lzo1x_decompress.c @@ -11,11 +11,13 @@ * Richard Purdie */ +#ifndef STATIC #include #include -#include -#include +#endif + #include +#include #include "lzodefs.h" #define HAVE_IP(x, ip_end, ip) ((size_t)(ip_end - ip) < (x)) @@ -244,9 +246,10 @@ lookbehind_overrun: *out_len = op - out; return LZO_E_LOOKBEHIND_OVERRUN; } - +#ifndef STATIC EXPORT_SYMBOL_GPL(lzo1x_decompress_safe); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("LZO1X Decompressor"); +#endif diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index cd815ac2a50b..0fe48cd91ffa 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -235,3 +235,8 @@ quiet_cmd_lzma = LZMA $@ cmd_lzma = (cat $(filter-out FORCE,$^) | \ lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ (rm -f $@ ; false) + +quiet_cmd_lzo = LZO $@ +cmd_lzo = (cat $(filter-out FORCE,$^) | \ + lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ + (rm -f $@ ; false) From e7db7b4270ed2a606b8c0b5f944a5f92ade0e84c Mon Sep 17 00:00:00 2001 From: Albin Tonnerre Date: Fri, 8 Jan 2010 14:42:43 -0800 Subject: [PATCH 0679/1626] arm: add support for LZO-compressed kernels - changes to ach/arch/boot/Makefile to make it easier to add new compression types - new piggy.lzo.S necessary for lzo compression - changes in arch/arm/boot/compressed/misc.c to allow the use of lzo or gzip, depending on the config - Kconfig support Signed-off-by: Albin Tonnerre Tested-by: Wu Zhangjin Acked-by: "H. Peter Anvin" Cc: Ingo Molnar Cc: Thomas Gleixner Tested-by: Russell King Acked-by: Russell King Cc: Ralf Baechle Cc: Martin Michlmayr Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/Kconfig | 2 + arch/arm/boot/compressed/Makefile | 34 +++-- arch/arm/boot/compressed/misc.c | 116 +++++------------- arch/arm/boot/compressed/piggy.gzip.S | 6 + .../boot/compressed/{piggy.S => piggy.lzo.S} | 2 +- 5 files changed, 68 insertions(+), 92 deletions(-) create mode 100644 arch/arm/boot/compressed/piggy.gzip.S rename arch/arm/boot/compressed/{piggy.S => piggy.lzo.S} (68%) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4f8760d7b7a7..c2238cd474c7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -18,6 +18,8 @@ config ARM select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_GENERIC_DMA_COHERENT + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_LZO help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index ce39dc540085..2d4d88ba73bf 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -63,8 +63,12 @@ endif SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ -targets := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \ - head.o misc.o $(OBJS) +suffix_$(CONFIG_KERNEL_GZIP) = gzip +suffix_$(CONFIG_KERNEL_LZO) = lzo + +targets := vmlinux vmlinux.lds \ + piggy.$(suffix_y) piggy.$(suffix_y).o \ + font.o font.c head.o misc.o $(OBJS) ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) @@ -87,22 +91,34 @@ endif ifneq ($(PARAMS_PHYS),) LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS) endif -LDFLAGS_vmlinux += -p --no-undefined -X \ - $(shell $(CC) $(KBUILD_CFLAGS) --print-libgcc-file-name) -T +# ? +LDFLAGS_vmlinux += -p +# Report unresolved symbol references +LDFLAGS_vmlinux += --no-undefined +# Delete all temporary local symbols +LDFLAGS_vmlinux += -X +# Next argument is a linker script +LDFLAGS_vmlinux += -T + +# For __aeabi_uidivmod +lib1funcs = $(obj)/lib1funcs.o + +$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE + $(call cmd,shipped) # Don't allow any static data in misc.o, which # would otherwise mess up our GOT table CFLAGS_misc.o := -Dstatic= -$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \ - $(addprefix $(obj)/, $(OBJS)) FORCE +$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \ + $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE $(call if_changed,ld) @: -$(obj)/piggy.gz: $(obj)/../Image FORCE - $(call if_changed,gzip) +$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE + $(call if_changed,$(suffix_y)) -$(obj)/piggy.o: $(obj)/piggy.gz FORCE +$(obj)/piggy.$(suffix_y).o: $(obj)/piggy.$(suffix_y) FORCE CFLAGS_font.o := -Dstatic= diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 17153b54613b..7e0fe4d42c7b 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -18,10 +18,15 @@ unsigned int __machine_arch_type; +#define _LINUX_STRING_H_ + #include /* for inline */ #include /* for size_t */ #include /* for NULL */ #include +#include + +#include #ifdef STANDALONE_DEBUG #define putstr printf @@ -188,34 +193,8 @@ static inline __ptr_t memcpy(__ptr_t __dest, __const __ptr_t __src, /* * gzip delarations */ -#define OF(args) args #define STATIC static -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* Window size must be at least 32k, */ - /* and a power of two */ - -static uch *inbuf; /* input buffer */ -static uch window[WSIZE]; /* Sliding window buffer */ - -static unsigned insize; /* valid bytes in inbuf */ -static unsigned inptr; /* index of next byte to be processed in inbuf */ -static unsigned outcnt; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) - /* Diagnostic functions */ #ifdef DEBUG # define Assert(cond,msg) {if(!(cond)) error(msg);} @@ -233,24 +212,20 @@ static unsigned outcnt; /* bytes in output buffer */ # define Tracecv(c,x) #endif -static int fill_inbuf(void); -static void flush_window(void); static void error(char *m); extern char input_data[]; extern char input_data_end[]; -static uch *output_data; -static ulg output_ptr; -static ulg bytes_out; +static unsigned char *output_data; +static unsigned long output_ptr; static void error(char *m); static void putstr(const char *); -extern int end; -static ulg free_mem_ptr; -static ulg free_mem_end_ptr; +static unsigned long free_mem_ptr; +static unsigned long free_mem_end_ptr; #ifdef STANDALONE_DEBUG #define NO_INFLATE_MALLOC @@ -258,46 +233,13 @@ static ulg free_mem_end_ptr; #define ARCH_HAS_DECOMP_WDOG -#include "../../../../lib/inflate.c" +#ifdef CONFIG_KERNEL_GZIP +#include "../../../../lib/decompress_inflate.c" +#endif -/* =========================================================================== - * Fill the input buffer. This is called only when the buffer is empty - * and at least one byte is really needed. - */ -int fill_inbuf(void) -{ - if (insize != 0) - error("ran out of input data"); - - inbuf = input_data; - insize = &input_data_end[0] - &input_data[0]; - - inptr = 1; - return inbuf[0]; -} - -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ -void flush_window(void) -{ - ulg c = crc; - unsigned n; - uch *in, *out, ch; - - in = window; - out = &output_data[output_ptr]; - for (n = 0; n < outcnt; n++) { - ch = *out++ = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; - putstr("."); -} +#ifdef CONFIG_KERNEL_LZO +#include "../../../../lib/decompress_unlzo.c" +#endif #ifndef arch_error #define arch_error(x) @@ -314,22 +256,33 @@ static void error(char *x) while(1); /* Halt */ } +asmlinkage void __div0(void) +{ + error("Attempting division by 0!"); +} + #ifndef STANDALONE_DEBUG -ulg -decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p, - int arch_id) +unsigned long +decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p, + unsigned long free_mem_ptr_end_p, + int arch_id) { - output_data = (uch *)output_start; /* Points to kernel start */ + unsigned char *tmp; + + output_data = (unsigned char *)output_start; free_mem_ptr = free_mem_ptr_p; free_mem_end_ptr = free_mem_ptr_end_p; __machine_arch_type = arch_id; arch_decomp_setup(); - makecrc(); + tmp = (unsigned char *) (((unsigned long)input_data_end) - 4); + output_ptr = get_unaligned_le32(tmp); + putstr("Uncompressing Linux..."); - gunzip(); + decompress(input_data, input_data_end - input_data, + NULL, NULL, output_data, NULL, error); putstr(" done, booting the kernel.\n"); return output_ptr; } @@ -341,11 +294,10 @@ int main() { output_data = output_buffer; - makecrc(); putstr("Uncompressing Linux..."); - gunzip(); + decompress(input_data, input_data_end - input_data, + NULL, NULL, output_data, NULL, error); putstr("done.\n"); return 0; } #endif - diff --git a/arch/arm/boot/compressed/piggy.gzip.S b/arch/arm/boot/compressed/piggy.gzip.S new file mode 100644 index 000000000000..a68adf91a165 --- /dev/null +++ b/arch/arm/boot/compressed/piggy.gzip.S @@ -0,0 +1,6 @@ + .section .piggydata,#alloc + .globl input_data +input_data: + .incbin "arch/arm/boot/compressed/piggy.gzip" + .globl input_data_end +input_data_end: diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.lzo.S similarity index 68% rename from arch/arm/boot/compressed/piggy.S rename to arch/arm/boot/compressed/piggy.lzo.S index 54c951800ebd..a425ad95959a 100644 --- a/arch/arm/boot/compressed/piggy.S +++ b/arch/arm/boot/compressed/piggy.lzo.S @@ -1,6 +1,6 @@ .section .piggydata,#alloc .globl input_data input_data: - .incbin "arch/arm/boot/compressed/piggy.gz" + .incbin "arch/arm/boot/compressed/piggy.lzo" .globl input_data_end input_data_end: From 13510997d600a076e064f10587a8f6d20f8fff41 Mon Sep 17 00:00:00 2001 From: Albin Tonnerre Date: Fri, 8 Jan 2010 14:42:45 -0800 Subject: [PATCH 0680/1626] x86: add support for LZO-compressed kernels The necessary changes to the x86 Kconfig and boot/compressed to allow the use of this new compression method Signed-off-by: Albin Tonnerre Acked-by: H. Peter Anvin Tested-by: Wu Zhangjin Cc: Ingo Molnar Cc: Thomas Gleixner Tested-by: Russell King Acked-by: Russell King Cc: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/Kconfig | 1 + arch/x86/boot/compressed/Makefile | 5 ++++- arch/x86/boot/compressed/misc.c | 4 ++++ 3 files changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 55298e891571..6bf1f1ac478c 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -49,6 +49,7 @@ config X86 select HAVE_KERNEL_GZIP select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_LZMA + select HAVE_KERNEL_LZO select HAVE_HW_BREAKPOINT select PERF_EVENTS select ANON_INODES diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index f25bbd37765a..fbb47daf2459 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -4,7 +4,7 @@ # create a compressed vmlinux image from the original vmlinux # -targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o +targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo head_$(BITS).o misc.o piggy.o KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC @@ -49,10 +49,13 @@ $(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE $(call if_changed,bzip2) $(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE $(call if_changed,lzma) +$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE + $(call if_changed,lzo) suffix-$(CONFIG_KERNEL_GZIP) := gz suffix-$(CONFIG_KERNEL_BZIP2) := bz2 suffix-$(CONFIG_KERNEL_LZMA) := lzma +suffix-$(CONFIG_KERNEL_LZO) := lzo quiet_cmd_mkpiggy = MKPIGGY $@ cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false ) diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 842b2a36174a..3b22fe8ab91b 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -162,6 +162,10 @@ static int lines, cols; #include "../../../../lib/decompress_unlzma.c" #endif +#ifdef CONFIG_KERNEL_LZO +#include "../../../../lib/decompress_unlzo.c" +#endif + static void scroll(void) { int i; From cacb246f8db2b9eba89d44a0f0dd4f6ed93bc113 Mon Sep 17 00:00:00 2001 From: Albin Tonnerre Date: Fri, 8 Jan 2010 14:42:46 -0800 Subject: [PATCH 0681/1626] Add LZO compression support for initramfs and old-style initrd Signed-off-by: Albin Tonnerre Tested-by: Wu Zhangjin Acked-by: "H. Peter Anvin" Cc: Ingo Molnar Cc: Thomas Gleixner Tested-by: Russell King Acked-by: Russell King Cc: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/Kconfig | 4 ++++ lib/Makefile | 1 + lib/decompress.c | 5 +++++ usr/Kconfig | 26 +++++++++++++++++++++----- 4 files changed, 31 insertions(+), 5 deletions(-) diff --git a/lib/Kconfig b/lib/Kconfig index 1cfe51628e1b..97b136ff117e 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -117,6 +117,10 @@ config DECOMPRESS_BZIP2 config DECOMPRESS_LZMA tristate +config DECOMPRESS_LZO + select LZO_DECOMPRESS + tristate + # # Generic allocator support is selected if needed # diff --git a/lib/Makefile b/lib/Makefile index 347ad8db29d3..911b25aed1e7 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/ lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o +lib-$(CONFIG_DECOMPRESS_LZO) += decompress_unlzo.o obj-$(CONFIG_TEXTSEARCH) += textsearch.o obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o diff --git a/lib/decompress.c b/lib/decompress.c index d2842f571674..a7606815541f 100644 --- a/lib/decompress.c +++ b/lib/decompress.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include @@ -22,6 +23,9 @@ #ifndef CONFIG_DECOMPRESS_LZMA # define unlzma NULL #endif +#ifndef CONFIG_DECOMPRESS_LZO +# define unlzo NULL +#endif static const struct compress_format { unsigned char magic[2]; @@ -32,6 +36,7 @@ static const struct compress_format { { {037, 0236}, "gzip", gunzip }, { {0x42, 0x5a}, "bzip2", bunzip2 }, { {0x5d, 0x00}, "lzma", unlzma }, + { {0x89, 0x4c}, "lzo", unlzo }, { {0, 0}, NULL, NULL } }; diff --git a/usr/Kconfig b/usr/Kconfig index 1c3039f28909..e2721f5a3504 100644 --- a/usr/Kconfig +++ b/usr/Kconfig @@ -72,6 +72,15 @@ config RD_LZMA Support loading of a LZMA encoded initial ramdisk or cpio buffer If unsure, say N. +config RD_LZO + bool "Support initial ramdisks compressed using LZO" if EMBEDDED + default !EMBEDDED + depends on BLK_DEV_INITRD + select DECOMPRESS_LZO + help + Support loading of a LZO encoded initial ramdisk or cpio buffer + If unsure, say N. + choice prompt "Built-in initramfs compression mode" if INITRAMFS_SOURCE!="" help @@ -108,16 +117,15 @@ config INITRAMFS_COMPRESSION_GZIP bool "Gzip" depends on RD_GZIP help - The old and tried gzip compression. Its compression ratio is - the poorest among the 3 choices; however its speed (both - compression and decompression) is the fastest. + The old and tried gzip compression. It provides a good balance + between compression ratio and decompression speed. config INITRAMFS_COMPRESSION_BZIP2 bool "Bzip2" depends on RD_BZIP2 help Its compression ratio and speed is intermediate. - Decompression speed is slowest among the three. The initramfs + Decompression speed is slowest among the four. The initramfs size is about 10% smaller with bzip2, in comparison to gzip. Bzip2 uses a large amount of memory. For modern kernels you will need at least 8MB RAM or more for booting. @@ -128,7 +136,15 @@ config INITRAMFS_COMPRESSION_LZMA help The most recent compression algorithm. Its ratio is best, decompression speed is between the other - two. Compression is slowest. The initramfs size is about 33% + three. Compression is slowest. The initramfs size is about 33% smaller with LZMA in comparison to gzip. +config INITRAMFS_COMPRESSION_LZO + bool "LZO" + depends on RD_LZO + help + Its compression ratio is the poorest among the four. The kernel + size is about about 10% bigger than gzip; however its speed + (both compression and decompression) is the fastest. + endchoice From 7ee3aebe31d2cb22c84e1c8f48182947b13a3607 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 8 Jan 2010 14:42:47 -0800 Subject: [PATCH 0682/1626] lib/rational.c needs module.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit lib/rational.c:62: warning: data definition has no type or storage class lib/rational.c:62: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' lib/rational.c:62: warning: parameter names (without types) in function declaration Signed-off-by: Sascha Hauer Signed-off-by: Uwe Kleine-König Acked-by: WANG Cong Cc: Oskar Schirmer Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/rational.c | 1 + 1 file changed, 1 insertion(+) diff --git a/lib/rational.c b/lib/rational.c index b3c099b5478e..3ed247b80662 100644 --- a/lib/rational.c +++ b/lib/rational.c @@ -7,6 +7,7 @@ */ #include +#include /* * calculate best rational approximation for a given fraction From 272a897904b9a067550f5b8e812036b65180418f Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 8 Jan 2010 14:42:48 -0800 Subject: [PATCH 0683/1626] scripts/get_maintainer.pl: fix file exclusion X: logic The following command doesn't generate any output. `./scripts/get_maintainer.pl --no-git -f drivers/net/wireless/wl12xx/wl1271_acx.c` An excluded "X:" pattern match in any section would cause a file not to match any other section. Signed-off-by: Joe Perches Reported-by: Dan Carpenter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 82 +++++++++++++++++++++++++-------------- 1 file changed, 53 insertions(+), 29 deletions(-) diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 445e8845f0a4..090f24839700 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -296,46 +296,56 @@ my @status = (); foreach my $file (@files) { -#Do not match excluded file patterns + my %hash; + my $tvi = find_first_section(); + while ($tvi < @typevalue) { + my $start = find_starting_index($tvi); + my $end = find_ending_index($tvi); + my $exclude = 0; + my $i; - my $exclude = 0; - foreach my $line (@typevalue) { - if ($line =~ m/^(\C):\s*(.*)/) { - my $type = $1; - my $value = $2; - if ($type eq 'X') { - if (file_match_pattern($file, $value)) { - $exclude = 1; - last; - } - } - } - } + #Do not match excluded file patterns - if (!$exclude) { - my $tvi = 0; - my %hash; - foreach my $line (@typevalue) { + for ($i = $start; $i < $end; $i++) { + my $line = $typevalue[$i]; if ($line =~ m/^(\C):\s*(.*)/) { my $type = $1; my $value = $2; - if ($type eq 'F') { + if ($type eq 'X') { if (file_match_pattern($file, $value)) { - my $value_pd = ($value =~ tr@/@@); - my $file_pd = ($file =~ tr@/@@); - $value_pd++ if (substr($value,-1,1) ne "/"); - if ($pattern_depth == 0 || - (($file_pd - $value_pd) < $pattern_depth)) { - $hash{$tvi} = $value_pd; + $exclude = 1; + } + } + } + } + + if (!$exclude) { + for ($i = $start; $i < $end; $i++) { + my $line = $typevalue[$i]; + if ($line =~ m/^(\C):\s*(.*)/) { + my $type = $1; + my $value = $2; + if ($type eq 'F') { + if (file_match_pattern($file, $value)) { + my $value_pd = ($value =~ tr@/@@); + my $file_pd = ($file =~ tr@/@@); + $value_pd++ if (substr($value,-1,1) ne "/"); + if ($pattern_depth == 0 || + (($file_pd - $value_pd) < $pattern_depth)) { + $hash{$tvi} = $value_pd; + } } } } } - $tvi++; - } - foreach my $line (sort {$hash{$b} <=> $hash{$a}} keys %hash) { - add_categories($line); } + + $tvi += ($end - $start); + + } + + foreach my $line (sort {$hash{$b} <=> $hash{$a}} keys %hash) { + add_categories($line); } if ($email && $email_git) { @@ -570,6 +580,20 @@ sub format_email { return $formatted_email; } +sub find_first_section { + my $index = 0; + + while ($index < @typevalue) { + my $tv = $typevalue[$index]; + if (($tv =~ m/^(\C):\s*(.*)/)) { + last; + } + $index++; + } + + return $index; +} + sub find_starting_index { my ($index) = @_; From bd4f490a079730aadfaf9a728303ea0135c01945 Mon Sep 17 00:00:00 2001 From: Dave Anderson Date: Fri, 8 Jan 2010 14:42:50 -0800 Subject: [PATCH 0684/1626] cgroups: fix 2.6.32 regression causing BUG_ON() in cgroup_diput() The LTP cgroup test suite generates a "kernel BUG at kernel/cgroup.c:790!" here in cgroup_diput(): /* * if we're getting rid of the cgroup, refcount should ensure * that there are no pidlists left. */ BUG_ON(!list_empty(&cgrp->pidlists)); The cgroup pidlist rework in 2.6.32 generates the BUG_ON, which is caused when pidlist_array_load() calls cgroup_pidlist_find(): (1) if a matching cgroup_pidlist is found, it down_write's the mutex of the pre-existing cgroup_pidlist, and increments its use_count. (2) if no matching cgroup_pidlist is found, then a new one is allocated, it down_write's its mutex, and the use_count is set to 0. (3) the matching, or new, cgroup_pidlist gets returned back to pidlist_array_load(), which increments its use_count -- regardless whether new or pre-existing -- and up_write's the mutex. So if a matching list is ever encountered by cgroup_pidlist_find() during the life of a cgroup directory, it results in an inflated use_count value, preventing it from ever getting released by cgroup_release_pid_array(). Then if the directory is subsequently removed, cgroup_diput() hits the BUG_ON() when it finds that the directory's cgroup is still populated with a pidlist. The patch simply removes the use_count increment when a matching pidlist is found by cgroup_pidlist_find(), because it gets bumped by the calling pidlist_array_load() function while still protected by the list's mutex. Signed-off-by: Dave Anderson Reviewed-by: Li Zefan Acked-by: Ben Blum Cc: Paul Menage Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 0249f4be9b5c..1fbcc748044a 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2468,7 +2468,6 @@ static struct cgroup_pidlist *cgroup_pidlist_find(struct cgroup *cgrp, /* make sure l doesn't vanish out from under us */ down_write(&l->mutex); mutex_unlock(&cgrp->pidlist_mutex); - l->use_count++; return l; } } From b45c6e76bc2c72f6426c14bed64fdcbc9bf37cb0 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 8 Jan 2010 14:42:52 -0800 Subject: [PATCH 0685/1626] kernel/signal.c: fix kernel information leak with print-fatal-signals=1 When print-fatal-signals is enabled it's possible to dump any memory reachable by the kernel to the log by simply jumping to that address from user space. Or crash the system if there's some hardware with read side effects. The fatal signals handler will dump 16 bytes at the execution address, which is fully controlled by ring 3. In addition when something jumps to a unmapped address there will be up to 16 additional useless page faults, which might be potentially slow (and at least is not very efficient) Fortunately this option is off by default and only there on i386. But fix it by checking for kernel addresses and also stopping when there's a page fault. Signed-off-by: Andi Kleen Cc: Ingo Molnar Cc: Oleg Nesterov Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/signal.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/signal.c b/kernel/signal.c index d09692b40376..934ae5e687b9 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -979,7 +979,8 @@ static void print_fatal_signal(struct pt_regs *regs, int signr) for (i = 0; i < 16; i++) { unsigned char insn; - __get_user(insn, (unsigned char *)(regs->ip + i)); + if (get_user(insn, (unsigned char *)(regs->ip + i))) + break; printk("%02x ", insn); } } From f146aabfe921006b98dfa4a78506763aedfd3206 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 8 Jan 2010 14:42:54 -0800 Subject: [PATCH 0686/1626] .gitignore: ignore vmlinuz MIPS compressed kernels output a vmlinuz file in the top-level directory (maybe others do). Add vmlinuz to the list of files to ignore by git. Signed-off-by: Florian Fainelli Cc: Ralf Baechle Cc: Maxime Bizon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- .gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/.gitignore b/.gitignore index fb2190c61af0..de6344e15706 100644 --- a/.gitignore +++ b/.gitignore @@ -37,6 +37,7 @@ modules.builtin tags TAGS vmlinux +vmlinuz System.map Module.markers Module.symvers From 1306d603fcf1f6682f8575d1ff23631a24184b21 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Fri, 8 Jan 2010 14:42:56 -0800 Subject: [PATCH 0687/1626] proc: partially revert "procfs: provide stack information for threads" Commit d899bf7b (procfs: provide stack information for threads) introduced to show stack information in /proc/{pid}/status. But it cause large performance regression. Unfortunately /proc/{pid}/status is used ps command too and ps is one of most important component. Because both to take mmap_sem and page table walk are heavily operation. If many process run, the ps performance is, [before d899bf7b] % perf stat ps >/dev/null Performance counter stats for 'ps': 4090.435806 task-clock-msecs # 0.032 CPUs 229 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 234 page-faults # 0.000 M/sec 8587565207 cycles # 2099.425 M/sec 9866662403 instructions # 1.149 IPC 3789415411 cache-references # 926.409 M/sec 30419509 cache-misses # 7.437 M/sec 128.859521955 seconds time elapsed [after d899bf7b] % perf stat ps > /dev/null Performance counter stats for 'ps': 4305.081146 task-clock-msecs # 0.028 CPUs 480 context-switches # 0.000 M/sec 2 CPU-migrations # 0.000 M/sec 237 page-faults # 0.000 M/sec 9021211334 cycles # 2095.480 M/sec 10605887536 instructions # 1.176 IPC 3612650999 cache-references # 839.160 M/sec 23917502 cache-misses # 5.556 M/sec 152.277819582 seconds time elapsed Thus, this patch revert it. Fortunately /proc/{pid}/task/{tid}/smaps provide almost same information. we can use it. Commit d899bf7b introduced two features: 1) Add the annotattion of [thread stack: xxxx] mark to /proc/{pid}/task/{tid}/maps. 2) Add StackUsage field to /proc/{pid}/status. I only revert (2), because I haven't seen (1) cause regression. Signed-off-by: KOSAKI Motohiro Cc: Stefani Seibold Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Alexey Dobriyan Cc: "Eric W. Biederman" Cc: Randy Dunlap Cc: Andrew Morton Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 2 - fs/proc/array.c | 89 ------------------------------ 2 files changed, 91 deletions(-) diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 220cc6376ef8..0d07513a67a6 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -177,7 +177,6 @@ read the file /proc/PID/status: CapBnd: ffffffffffffffff voluntary_ctxt_switches: 0 nonvoluntary_ctxt_switches: 1 - Stack usage: 12 kB This shows you nearly the same information you would get if you viewed it with the ps command. In fact, ps uses the proc file system to obtain its @@ -231,7 +230,6 @@ Table 1-2: Contents of the statm files (as of 2.6.30-rc7) Mems_allowed_list Same as previous, but in "list format" voluntary_ctxt_switches number of voluntary context switches nonvoluntary_ctxt_switches number of non voluntary context switches - Stack usage: stack usage high water mark (round up to page size) .............................................................................. Table 1-3: Contents of the statm files (as of 2.6.8-rc3) diff --git a/fs/proc/array.c b/fs/proc/array.c index f560325c444f..13b5d0708175 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -327,94 +327,6 @@ static inline void task_context_switch_counts(struct seq_file *m, p->nivcsw); } -#ifdef CONFIG_MMU - -struct stack_stats { - struct vm_area_struct *vma; - unsigned long startpage; - unsigned long usage; -}; - -static int stack_usage_pte_range(pmd_t *pmd, unsigned long addr, - unsigned long end, struct mm_walk *walk) -{ - struct stack_stats *ss = walk->private; - struct vm_area_struct *vma = ss->vma; - pte_t *pte, ptent; - spinlock_t *ptl; - int ret = 0; - - pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl); - for (; addr != end; pte++, addr += PAGE_SIZE) { - ptent = *pte; - -#ifdef CONFIG_STACK_GROWSUP - if (pte_present(ptent) || is_swap_pte(ptent)) - ss->usage = addr - ss->startpage + PAGE_SIZE; -#else - if (pte_present(ptent) || is_swap_pte(ptent)) { - ss->usage = ss->startpage - addr + PAGE_SIZE; - pte++; - ret = 1; - break; - } -#endif - } - pte_unmap_unlock(pte - 1, ptl); - cond_resched(); - return ret; -} - -static inline unsigned long get_stack_usage_in_bytes(struct vm_area_struct *vma, - struct task_struct *task) -{ - struct stack_stats ss; - struct mm_walk stack_walk = { - .pmd_entry = stack_usage_pte_range, - .mm = vma->vm_mm, - .private = &ss, - }; - - if (!vma->vm_mm || is_vm_hugetlb_page(vma)) - return 0; - - ss.vma = vma; - ss.startpage = task->stack_start & PAGE_MASK; - ss.usage = 0; - -#ifdef CONFIG_STACK_GROWSUP - walk_page_range(KSTK_ESP(task) & PAGE_MASK, vma->vm_end, - &stack_walk); -#else - walk_page_range(vma->vm_start, (KSTK_ESP(task) & PAGE_MASK) + PAGE_SIZE, - &stack_walk); -#endif - return ss.usage; -} - -static inline void task_show_stack_usage(struct seq_file *m, - struct task_struct *task) -{ - struct vm_area_struct *vma; - struct mm_struct *mm = get_task_mm(task); - - if (mm) { - down_read(&mm->mmap_sem); - vma = find_vma(mm, task->stack_start); - if (vma) - seq_printf(m, "Stack usage:\t%lu kB\n", - get_stack_usage_in_bytes(vma, task) >> 10); - - up_read(&mm->mmap_sem); - mmput(mm); - } -} -#else -static void task_show_stack_usage(struct seq_file *m, struct task_struct *task) -{ -} -#endif /* CONFIG_MMU */ - static void task_cpus_allowed(struct seq_file *m, struct task_struct *task) { seq_printf(m, "Cpus_allowed:\t"); @@ -445,7 +357,6 @@ int proc_pid_status(struct seq_file *m, struct pid_namespace *ns, task_show_regs(m, task); #endif task_context_switch_counts(m, task); - task_show_stack_usage(m, task); return 0; } From 0a88422312f5bf7b9e3450e27d8ddc385af38789 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 8 Jan 2010 14:42:57 -0800 Subject: [PATCH 0688/1626] power: fix kernel-doc notation Warning(drivers/base/power/main.c:453): No description found for parameter 'dev' Warning(drivers/base/power/main.c:453): No description found for parameter 'cb' Warning(drivers/base/power/main.c:719): No description found for parameter 'dev' Warning(drivers/base/power/main.c:719): No description found for parameter 'state' Warning(drivers/base/power/main.c:719): No description found for parameter 'cb' Signed-off-by: Randy Dunlap Cc: Rafael J. Wysocki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/base/power/main.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 48adf80926a0..a5142bddef41 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -446,8 +446,8 @@ EXPORT_SYMBOL_GPL(dpm_resume_noirq); /** * legacy_resume - Execute a legacy (bus or class) resume callback for device. - * dev: Device to resume. - * cb: Resume callback to execute. + * @dev: Device to resume. + * @cb: Resume callback to execute. */ static int legacy_resume(struct device *dev, int (*cb)(struct device *dev)) { @@ -711,8 +711,9 @@ EXPORT_SYMBOL_GPL(dpm_suspend_noirq); /** * legacy_suspend - Execute a legacy (bus or class) suspend callback for device. - * dev: Device to suspend. - * cb: Suspend callback to execute. + * @dev: Device to suspend. + * @state: PM transition of the system being carried out. + * @cb: Suspend callback to execute. */ static int legacy_suspend(struct device *dev, pm_message_t state, int (*cb)(struct device *dev, pm_message_t state)) From 7d92df692994472cab6045bbd9d0e2c4afa4365f Mon Sep 17 00:00:00 2001 From: Anna Lemehova Date: Fri, 8 Jan 2010 14:42:58 -0800 Subject: [PATCH 0689/1626] mmc_block: add dev_t initialization check When a card is removed before mmc_blk_probe() has called add_disk(), then the minor field is uninitialized and has value 0. This caused mmc_blk_put() to always release devidx 0 even if 0 was still in use. Then the next mmc_blk_probe() used the first free idx of 0, which oopses in sysfs, since it is used by another card. Signed-off-by: Anna Lemehova Signed-off-by: Adrian Hunter Cc: Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/card/block.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 85f0e8cd875b..5988573bb843 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -85,7 +85,12 @@ static void mmc_blk_put(struct mmc_blk_data *md) mutex_lock(&open_lock); md->usage--; if (md->usage == 0) { + int devmaj = MAJOR(disk_devt(md->disk)); int devidx = MINOR(disk_devt(md->disk)) >> MMC_SHIFT; + + if (!devmaj) + devidx = md->disk->first_minor >> MMC_SHIFT; + __clear_bit(devidx, dev_use); put_disk(md->disk); From 0a74ff29b8dd8b748f8856352f9a9b5c6cc362cc Mon Sep 17 00:00:00 2001 From: Jarkko Lavinen Date: Fri, 8 Jan 2010 14:42:59 -0800 Subject: [PATCH 0690/1626] mmc_block: fix probe error cleanup bug If mmc_blk_set_blksize() fails mmc_blk_probe() the request queue and its thread have been set up and they need to be shut down properly before putting the disk. Signed-off-by: Jarkko Lavinen Signed-off-by: Adrian Hunter Cc: Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/card/block.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 5988573bb843..ee879117017f 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -618,6 +618,7 @@ static int mmc_blk_probe(struct mmc_card *card) return 0; out: + mmc_cleanup_queue(&md->queue); mmc_blk_put(md); return err; From 5fa83ce284a4b7cd9dcfadd01500b0ed4ab9b740 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 8 Jan 2010 14:43:00 -0800 Subject: [PATCH 0691/1626] mmc_block: fix queue cleanup The main bug was that 'blk_cleanup_queue()' was called while the block device could still be in use, for example, because the card was removed while files were still open. In addition, to be sure that 'mmc_request()' will get called for all new requests (so it can error them out), the queue is emptied during cleanup. This is done after the worker thread is stopped to avoid racing with it. Finally, it is not a device error for this to be happening, so quiet the (sometimes very many) error messages. Signed-off-by: Adrian Hunter Cc: Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/card/block.c | 2 ++ drivers/mmc/card/queue.c | 18 +++++++++--------- 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index ee879117017f..1f552c6e7579 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -91,6 +91,8 @@ static void mmc_blk_put(struct mmc_blk_data *md) if (!devmaj) devidx = md->disk->first_minor >> MMC_SHIFT; + blk_cleanup_queue(md->queue.queue); + __clear_bit(devidx, dev_use); put_disk(md->disk); diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 49e582356c65..c5a7a855f4b1 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -90,9 +90,10 @@ static void mmc_request(struct request_queue *q) struct request *req; if (!mq) { - printk(KERN_ERR "MMC: killing requests for dead queue\n"); - while ((req = blk_fetch_request(q)) != NULL) + while ((req = blk_fetch_request(q)) != NULL) { + req->cmd_flags |= REQ_QUIET; __blk_end_request_all(req, -EIO); + } return; } @@ -223,17 +224,18 @@ void mmc_cleanup_queue(struct mmc_queue *mq) struct request_queue *q = mq->queue; unsigned long flags; - /* Mark that we should start throwing out stragglers */ - spin_lock_irqsave(q->queue_lock, flags); - q->queuedata = NULL; - spin_unlock_irqrestore(q->queue_lock, flags); - /* Make sure the queue isn't suspended, as that will deadlock */ mmc_queue_resume(mq); /* Then terminate our worker thread */ kthread_stop(mq->thread); + /* Empty the queue */ + spin_lock_irqsave(q->queue_lock, flags); + q->queuedata = NULL; + blk_start_queue(q); + spin_unlock_irqrestore(q->queue_lock, flags); + if (mq->bounce_sg) kfree(mq->bounce_sg); mq->bounce_sg = NULL; @@ -245,8 +247,6 @@ void mmc_cleanup_queue(struct mmc_queue *mq) kfree(mq->bounce_buf); mq->bounce_buf = NULL; - blk_cleanup_queue(mq->queue); - mq->card = NULL; } EXPORT_SYMBOL(mmc_cleanup_queue); From 11723ab15d28e71dd118a8a92f98493f5a5907da Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 8 Jan 2010 14:43:01 -0800 Subject: [PATCH 0692/1626] mmc: allow for MMC v4.4 JEDEC eMMC specification version 4.4 (MMCA 4.4) defines Extended CSD structure versions up to 5. Signed-off-by: Adrian Hunter Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/core/mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index c11189446a1f..0eac6c814904 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -207,7 +207,7 @@ static int mmc_read_ext_csd(struct mmc_card *card) } card->ext_csd.rev = ext_csd[EXT_CSD_REV]; - if (card->ext_csd.rev > 3) { + if (card->ext_csd.rev > 5) { printk(KERN_ERR "%s: unrecognised EXT_CSD structure " "version %d\n", mmc_hostname(card->host), card->ext_csd.rev); From 3f4724027bfe38644146252f7aa979dea7f80720 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 8 Jan 2010 14:43:02 -0800 Subject: [PATCH 0693/1626] vsnprintf: fix reference for compressed ipv6 addresses MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Reported-by: Josip Rodin Cc: Joe Perches Cc: David S. Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/vsprintf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/vsprintf.c b/lib/vsprintf.c index d4996cf46eb6..3b8aeec4e327 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -903,7 +903,7 @@ static char *uuid_string(char *buf, char *end, const u8 *addr, * IPv6 omits the colons (01020304...0f) * IPv4 uses dot-separated decimal with leading 0's (010.123.045.006) * - 'I6c' for IPv6 addresses printed as specified by - * http://www.ietf.org/id/draft-kawamura-ipv6-text-representation-03.txt + * http://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-00 * - 'U' For a 16 byte UUID/GUID, it prints the UUID/GUID in the form * "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" * Options for %pU are: @@ -1188,7 +1188,7 @@ qualifier: * %pI6 print an IPv6 address with colons * %pi6 print an IPv6 address without colons * %pI6c print an IPv6 address as specified by - * http://www.ietf.org/id/draft-kawamura-ipv6-text-representation-03.txt + * http://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-00 * %pU[bBlL] print a UUID/GUID in big or little endian using lower or upper * case. * %n is ignored From 24f3c59e1781435835083eab587399c8bdc235b4 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Fri, 8 Jan 2010 14:43:03 -0800 Subject: [PATCH 0694/1626] gpiolib: fix poll(2) support reconfigure on sysfs polarity change Previously enabled poll(2) support on one edge was never reconfigured when sysfs polarity change was triggered from kernel, because 'struct device *dev' shadowed an earlier definition. Found by sparse, which I should've run much earlier. Signed-off-by: Jani Nikula Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/gpiolib.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index a25ad284a272..350842ad3632 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -858,8 +858,6 @@ int gpio_sysfs_set_active_low(unsigned gpio, int value) desc = &gpio_desc[gpio]; if (test_bit(FLAG_EXPORT, &desc->flags)) { - struct device *dev; - dev = class_find_device(&gpio_class, NULL, desc, match_export); if (dev == NULL) { status = -ENODEV; From b5430a04e995081a308b4419bd0940f2badc6e6b Mon Sep 17 00:00:00 2001 From: Tomaz Mertelj Date: Fri, 8 Jan 2010 14:43:04 -0800 Subject: [PATCH 0695/1626] hwmon: driver for Texas Instruments amc6821 chip Signed-off-by: Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/hwmon/amc6821 | 102 ++++ drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/amc6821.c | 1116 +++++++++++++++++++++++++++++++++++ 4 files changed, 1229 insertions(+) create mode 100644 Documentation/hwmon/amc6821 create mode 100644 drivers/hwmon/amc6821.c diff --git a/Documentation/hwmon/amc6821 b/Documentation/hwmon/amc6821 new file mode 100644 index 000000000000..ced8359c50f8 --- /dev/null +++ b/Documentation/hwmon/amc6821 @@ -0,0 +1,102 @@ +Kernel driver amc6821 +===================== + +Supported chips: + Texas Instruments AMC6821 + Prefix: 'amc6821' + Addresses scanned: 0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, 0x4c, 0x4d, 0x4e + Datasheet: http://focus.ti.com/docs/prod/folders/print/amc6821.html + +Authors: + Tomaz Mertelj + + +Description +----------- + +This driver implements support for the Texas Instruments amc6821 chip. +The chip has one on-chip and one remote temperature sensor and one pwm fan +regulator. +The pwm can be controlled either from software or automatically. + +The driver provides the following sensor accesses in sysfs: + +temp1_input ro on-chip temperature +temp1_min rw " +temp1_max rw " +temp1_crit rw " +temp1_min_alarm ro " +temp1_max_alarm ro " +temp1_crit_alarm ro " + +temp2_input ro remote temperature +temp2_min rw " +temp2_max rw " +temp2_crit rw " +temp2_min_alarm ro " +temp2_max_alarm ro " +temp2_crit_alarm ro " +temp2_fault ro " + +fan1_input ro tachometer speed +fan1_min rw " +fan1_max rw " +fan1_fault ro " +fan1_div rw Fan divisor can be either 2 or 4. + +pwm1 rw pwm1 +pwm1_enable rw regulator mode, 1=open loop, 2=fan controlled + by remote temperature, 3=fan controlled by + combination of the on-chip temperature and + remote-sensor temperature, +pwm1_auto_channels_temp ro 1 if pwm_enable==2, 3 if pwm_enable==3 +pwm1_auto_point1_pwm ro Hardwired to 0, shared for both + temperature channels. +pwm1_auto_point2_pwm rw This value is shared for both temperature + channels. +pwm1_auto_point3_pwm rw Hardwired to 255, shared for both + temperature channels. + +temp1_auto_point1_temp ro Hardwired to temp2_auto_point1_temp + which is rw. Below this temperature fan stops. +temp1_auto_point2_temp rw The low-temperature limit of the proportional + range. Below this temperature + pwm1 = pwm1_auto_point2_pwm. It can go from + 0 degree C to 124 degree C in steps of + 4 degree C. Read it out after writing to get + the actual value. +temp1_auto_point3_temp rw Above this temperature fan runs at maximum + speed. It can go from temp1_auto_point2_temp. + It can only have certain discrete values + which depend on temp1_auto_point2_temp and + pwm1_auto_point2_pwm. Read it out after + writing to get the actual value. + +temp2_auto_point1_temp rw Must be between 0 degree C and 63 degree C and + it defines the passive cooling temperature. + Below this temperature the fan stops in + the closed loop mode. +temp2_auto_point2_temp rw The low-temperature limit of the proportional + range. Below this temperature + pwm1 = pwm1_auto_point2_pwm. It can go from + 0 degree C to 124 degree C in steps + of 4 degree C. + +temp2_auto_point3_temp rw Above this temperature fan runs at maximum + speed. It can only have certain discrete + values which depend on temp2_auto_point2_temp + and pwm1_auto_point2_pwm. Read it out after + writing to get actual value. + + +Module parameters +----------------- + +If your board has a BIOS that initializes the amc6821 correctly, you should +load the module with: init=0. + +If your board BIOS doesn't initialize the chip, or you want +different settings, you can set the following parameters: +init=1, +pwminv: 0 default pwm output, 1 inverts pwm output. + diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 46c3c566307e..07a0f030a3ec 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -792,6 +792,16 @@ config SENSORS_ADS7828 This driver can also be built as a module. If so, the module will be called ads7828. +config SENSORS_AMC6821 + tristate "Texas Instruments AMC6821" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Texas Instruments + AMC6821 hardware monitoring chips. + + This driver can also be build as a module. If so, the module + will be called amc6821. + config SENSORS_THMC50 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" depends on I2C && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 450c8e894277..4bc215c0953f 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -86,6 +86,7 @@ obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o +obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o obj-$(CONFIG_SENSORS_THMC50) += thmc50.o obj-$(CONFIG_SENSORS_TMP401) += tmp401.o obj-$(CONFIG_SENSORS_TMP421) += tmp421.o diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c new file mode 100644 index 000000000000..1c89d922d619 --- /dev/null +++ b/drivers/hwmon/amc6821.c @@ -0,0 +1,1116 @@ +/* + amc6821.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (C) 2009 T. Mertelj + + Based on max6650.c: + Copyright (C) 2007 Hans J. Koch + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + + +#include /* Needed for KERN_INFO */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +/* + * Addresses to scan. + */ + +static const unsigned short normal_i2c[] = {0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, + 0x4c, 0x4d, 0x4e, I2C_CLIENT_END}; + + + +/* + * Insmod parameters + */ + +static int pwminv = 0; /*Inverted PWM output. */ +module_param(pwminv, int, S_IRUGO); + +static int init = 1; /*Power-on initialization.*/ +module_param(init, int, S_IRUGO); + + +enum chips { amc6821 }; + +#define AMC6821_REG_DEV_ID 0x3D +#define AMC6821_REG_COMP_ID 0x3E +#define AMC6821_REG_CONF1 0x00 +#define AMC6821_REG_CONF2 0x01 +#define AMC6821_REG_CONF3 0x3F +#define AMC6821_REG_CONF4 0x04 +#define AMC6821_REG_STAT1 0x02 +#define AMC6821_REG_STAT2 0x03 +#define AMC6821_REG_TDATA_LOW 0x08 +#define AMC6821_REG_TDATA_HI 0x09 +#define AMC6821_REG_LTEMP_HI 0x0A +#define AMC6821_REG_RTEMP_HI 0x0B +#define AMC6821_REG_LTEMP_LIMIT_MIN 0x15 +#define AMC6821_REG_LTEMP_LIMIT_MAX 0x14 +#define AMC6821_REG_RTEMP_LIMIT_MIN 0x19 +#define AMC6821_REG_RTEMP_LIMIT_MAX 0x18 +#define AMC6821_REG_LTEMP_CRIT 0x1B +#define AMC6821_REG_RTEMP_CRIT 0x1D +#define AMC6821_REG_PSV_TEMP 0x1C +#define AMC6821_REG_DCY 0x22 +#define AMC6821_REG_LTEMP_FAN_CTRL 0x24 +#define AMC6821_REG_RTEMP_FAN_CTRL 0x25 +#define AMC6821_REG_DCY_LOW_TEMP 0x21 + +#define AMC6821_REG_TACH_LLIMITL 0x10 +#define AMC6821_REG_TACH_LLIMITH 0x11 +#define AMC6821_REG_TACH_HLIMITL 0x12 +#define AMC6821_REG_TACH_HLIMITH 0x13 + +#define AMC6821_CONF1_START 0x01 +#define AMC6821_CONF1_FAN_INT_EN 0x02 +#define AMC6821_CONF1_FANIE 0x04 +#define AMC6821_CONF1_PWMINV 0x08 +#define AMC6821_CONF1_FAN_FAULT_EN 0x10 +#define AMC6821_CONF1_FDRC0 0x20 +#define AMC6821_CONF1_FDRC1 0x40 +#define AMC6821_CONF1_THERMOVIE 0x80 + +#define AMC6821_CONF2_PWM_EN 0x01 +#define AMC6821_CONF2_TACH_MODE 0x02 +#define AMC6821_CONF2_TACH_EN 0x04 +#define AMC6821_CONF2_RTFIE 0x08 +#define AMC6821_CONF2_LTOIE 0x10 +#define AMC6821_CONF2_RTOIE 0x20 +#define AMC6821_CONF2_PSVIE 0x40 +#define AMC6821_CONF2_RST 0x80 + +#define AMC6821_CONF3_THERM_FAN_EN 0x80 +#define AMC6821_CONF3_REV_MASK 0x0F + +#define AMC6821_CONF4_OVREN 0x10 +#define AMC6821_CONF4_TACH_FAST 0x20 +#define AMC6821_CONF4_PSPR 0x40 +#define AMC6821_CONF4_MODE 0x80 + +#define AMC6821_STAT1_RPM_ALARM 0x01 +#define AMC6821_STAT1_FANS 0x02 +#define AMC6821_STAT1_RTH 0x04 +#define AMC6821_STAT1_RTL 0x08 +#define AMC6821_STAT1_R_THERM 0x10 +#define AMC6821_STAT1_RTF 0x20 +#define AMC6821_STAT1_LTH 0x40 +#define AMC6821_STAT1_LTL 0x80 + +#define AMC6821_STAT2_RTC 0x08 +#define AMC6821_STAT2_LTC 0x10 +#define AMC6821_STAT2_LPSV 0x20 +#define AMC6821_STAT2_L_THERM 0x40 +#define AMC6821_STAT2_THERM_IN 0x80 + +enum {IDX_TEMP1_INPUT = 0, IDX_TEMP1_MIN, IDX_TEMP1_MAX, + IDX_TEMP1_CRIT, IDX_TEMP2_INPUT, IDX_TEMP2_MIN, + IDX_TEMP2_MAX, IDX_TEMP2_CRIT, + TEMP_IDX_LEN, }; + +static const u8 temp_reg[] = {AMC6821_REG_LTEMP_HI, + AMC6821_REG_LTEMP_LIMIT_MIN, + AMC6821_REG_LTEMP_LIMIT_MAX, + AMC6821_REG_LTEMP_CRIT, + AMC6821_REG_RTEMP_HI, + AMC6821_REG_RTEMP_LIMIT_MIN, + AMC6821_REG_RTEMP_LIMIT_MAX, + AMC6821_REG_RTEMP_CRIT, }; + +enum {IDX_FAN1_INPUT = 0, IDX_FAN1_MIN, IDX_FAN1_MAX, + FAN1_IDX_LEN, }; + +static const u8 fan_reg_low[] = {AMC6821_REG_TDATA_LOW, + AMC6821_REG_TACH_LLIMITL, + AMC6821_REG_TACH_HLIMITL, }; + + +static const u8 fan_reg_hi[] = {AMC6821_REG_TDATA_HI, + AMC6821_REG_TACH_LLIMITH, + AMC6821_REG_TACH_HLIMITH, }; + +static int amc6821_probe( + struct i2c_client *client, + const struct i2c_device_id *id); +static int amc6821_detect( + struct i2c_client *client, + struct i2c_board_info *info); +static int amc6821_init_client(struct i2c_client *client); +static int amc6821_remove(struct i2c_client *client); +static struct amc6821_data *amc6821_update_device(struct device *dev); + +/* + * Driver data (common to all clients) + */ + +static const struct i2c_device_id amc6821_id[] = { + { "amc6821", amc6821 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, amc6821_id); + +static struct i2c_driver amc6821_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "amc6821", + }, + .probe = amc6821_probe, + .remove = amc6821_remove, + .id_table = amc6821_id, + .detect = amc6821_detect, + .address_list = normal_i2c, +}; + + +/* + * Client data (each client gets its own) + */ + +struct amc6821_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* register values */ + int temp[TEMP_IDX_LEN]; + + u16 fan[FAN1_IDX_LEN]; + u8 fan1_div; + + u8 pwm1; + u8 temp1_auto_point_temp[3]; + u8 temp2_auto_point_temp[3]; + u8 pwm1_auto_point_pwm[3]; + u8 pwm1_enable; + u8 pwm1_auto_channels_temp; + + u8 stat1; + u8 stat2; +}; + + +static ssize_t get_temp( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr(devattr)->index; + + return sprintf(buf, "%d\n", data->temp[ix] * 1000); +} + + + +static ssize_t set_temp( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + int ix = to_sensor_dev_attr(attr)->index; + long val; + + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + val = SENSORS_LIMIT(val / 1000, -128, 127); + + mutex_lock(&data->update_lock); + data->temp[ix] = val; + if (i2c_smbus_write_byte_data(client, temp_reg[ix], data->temp[ix])) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + } + mutex_unlock(&data->update_lock); + return count; +} + + + + +static ssize_t get_temp_alarm( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr(devattr)->index; + u8 flag; + + switch (ix) { + case IDX_TEMP1_MIN: + flag = data->stat1 & AMC6821_STAT1_LTL; + break; + case IDX_TEMP1_MAX: + flag = data->stat1 & AMC6821_STAT1_LTH; + break; + case IDX_TEMP1_CRIT: + flag = data->stat2 & AMC6821_STAT2_LTC; + break; + case IDX_TEMP2_MIN: + flag = data->stat1 & AMC6821_STAT1_RTL; + break; + case IDX_TEMP2_MAX: + flag = data->stat1 & AMC6821_STAT1_RTH; + break; + case IDX_TEMP2_CRIT: + flag = data->stat2 & AMC6821_STAT2_RTC; + break; + default: + dev_dbg(dev, "Unknown attr->index (%d).\n", ix); + return -EINVAL; + } + if (flag) + return sprintf(buf, "1"); + else + return sprintf(buf, "0"); +} + + + + +static ssize_t get_temp2_fault( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + if (data->stat1 & AMC6821_STAT1_RTF) + return sprintf(buf, "1"); + else + return sprintf(buf, "0"); +} + +static ssize_t get_pwm1( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1); +} + +static ssize_t set_pwm1( + struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->update_lock); + data->pwm1 = SENSORS_LIMIT(val , 0, 255); + i2c_smbus_write_byte_data(client, AMC6821_REG_DCY, data->pwm1); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t get_pwm1_enable( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1_enable); +} + +static ssize_t set_pwm1_enable( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int config = strict_strtol(buf, 10, &val); + if (config) + return config; + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return -EIO; + } + + switch (val) { + case 1: + config &= ~AMC6821_CONF1_FDRC0; + config &= ~AMC6821_CONF1_FDRC1; + break; + case 2: + config &= ~AMC6821_CONF1_FDRC0; + config |= AMC6821_CONF1_FDRC1; + break; + case 3: + config |= AMC6821_CONF1_FDRC0; + config |= AMC6821_CONF1_FDRC1; + break; + default: + return -EINVAL; + } + mutex_lock(&data->update_lock); + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF1, config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + count = -EIO; + } + mutex_unlock(&data->update_lock); + return count; +} + + +static ssize_t get_pwm1_auto_channels_temp( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1_auto_channels_temp); +} + + +static ssize_t get_temp_auto_point_temp( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int ix = to_sensor_dev_attr_2(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->nr; + struct amc6821_data *data = amc6821_update_device(dev); + switch (nr) { + case 1: + return sprintf(buf, "%d\n", + data->temp1_auto_point_temp[ix] * 1000); + break; + case 2: + return sprintf(buf, "%d\n", + data->temp2_auto_point_temp[ix] * 1000); + break; + default: + dev_dbg(dev, "Unknown attr->nr (%d).\n", nr); + return -EINVAL; + } +} + + +static ssize_t get_pwm1_auto_point_pwm( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int ix = to_sensor_dev_attr(devattr)->index; + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1_auto_point_pwm[ix]); +} + + +static inline ssize_t set_slope_register(struct i2c_client *client, + u8 reg, + u8 dpwm, + u8 *ptemp) +{ + int dt; + u8 tmp; + + dt = ptemp[2]-ptemp[1]; + for (tmp = 4; tmp > 0; tmp--) { + if (dt * (0x20 >> tmp) >= dpwm) + break; + } + tmp |= (ptemp[1] & 0x7C) << 1; + if (i2c_smbus_write_byte_data(client, + reg, tmp)) { + dev_err(&client->dev, "Register write error, aborting.\n"); + return -EIO; + } + return 0; +} + + + +static ssize_t set_temp_auto_point_temp( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr_2(attr)->index; + int nr = to_sensor_dev_attr_2(attr)->nr; + u8 *ptemp; + u8 reg; + int dpwm; + long val; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + + switch (nr) { + case 1: + ptemp = data->temp1_auto_point_temp; + reg = AMC6821_REG_LTEMP_FAN_CTRL; + break; + case 2: + ptemp = data->temp2_auto_point_temp; + reg = AMC6821_REG_RTEMP_FAN_CTRL; + break; + default: + dev_dbg(dev, "Unknown attr->nr (%d).\n", nr); + return -EINVAL; + } + + data->valid = 0; + mutex_lock(&data->update_lock); + switch (ix) { + case 0: + ptemp[0] = SENSORS_LIMIT(val / 1000, 0, + data->temp1_auto_point_temp[1]); + ptemp[0] = SENSORS_LIMIT(ptemp[0], 0, + data->temp2_auto_point_temp[1]); + ptemp[0] = SENSORS_LIMIT(ptemp[0], 0, 63); + if (i2c_smbus_write_byte_data( + client, + AMC6821_REG_PSV_TEMP, + ptemp[0])) { + dev_err(&client->dev, + "Register write error, aborting.\n"); + count = -EIO; + } + goto EXIT; + break; + case 1: + ptemp[1] = SENSORS_LIMIT( + val / 1000, + (ptemp[0] & 0x7C) + 4, + 124); + ptemp[1] &= 0x7C; + ptemp[2] = SENSORS_LIMIT( + ptemp[2], ptemp[1] + 1, + 255); + break; + case 2: + ptemp[2] = SENSORS_LIMIT( + val / 1000, + ptemp[1]+1, + 255); + break; + default: + dev_dbg(dev, "Unknown attr->index (%d).\n", ix); + count = -EINVAL; + goto EXIT; + } + dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1]; + if (set_slope_register(client, reg, dpwm, ptemp)) + count = -EIO; + +EXIT: + mutex_unlock(&data->update_lock); + return count; +} + + + +static ssize_t set_pwm1_auto_point_pwm( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + int dpwm; + long val; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->update_lock); + data->pwm1_auto_point_pwm[1] = SENSORS_LIMIT(val, 0, 254); + if (i2c_smbus_write_byte_data(client, AMC6821_REG_DCY_LOW_TEMP, + data->pwm1_auto_point_pwm[1])) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + goto EXIT; + } + dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1]; + if (set_slope_register(client, AMC6821_REG_LTEMP_FAN_CTRL, dpwm, + data->temp1_auto_point_temp)) { + count = -EIO; + goto EXIT; + } + if (set_slope_register(client, AMC6821_REG_RTEMP_FAN_CTRL, dpwm, + data->temp2_auto_point_temp)) { + count = -EIO; + goto EXIT; + } + +EXIT: + data->valid = 0; + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t get_fan( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr(devattr)->index; + if (0 == data->fan[ix]) + return sprintf(buf, "0"); + return sprintf(buf, "%d\n", (int)(6000000 / data->fan[ix])); +} + + + +static ssize_t get_fan1_fault( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + if (data->stat1 & AMC6821_STAT1_FANS) + return sprintf(buf, "1"); + else + return sprintf(buf, "0"); +} + + + +static ssize_t set_fan( + struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int ix = to_sensor_dev_attr(attr)->index; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + val = 1 > val ? 0xFFFF : 6000000/val; + + mutex_lock(&data->update_lock); + data->fan[ix] = (u16) SENSORS_LIMIT(val, 1, 0xFFFF); + if (i2c_smbus_write_byte_data(client, fan_reg_low[ix], + data->fan[ix] & 0xFF)) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + goto EXIT; + } + if (i2c_smbus_write_byte_data(client, + fan_reg_hi[ix], data->fan[ix] >> 8)) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + } +EXIT: + mutex_unlock(&data->update_lock); + return count; +} + + + +static ssize_t get_fan1_div( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->fan1_div); +} + +static ssize_t set_fan1_div( + struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int config = strict_strtol(buf, 10, &val); + if (config) + return config; + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4); + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return -EIO; + } + mutex_lock(&data->update_lock); + switch (val) { + case 2: + config &= ~AMC6821_CONF4_PSPR; + data->fan1_div = 2; + break; + case 4: + config |= AMC6821_CONF4_PSPR; + data->fan1_div = 4; + break; + default: + mutex_unlock(&data->update_lock); + count = -EINVAL; + goto EXIT; + } + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + count = -EIO; + } +EXIT: + mutex_unlock(&data->update_lock); + return count; +} + + + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, + get_temp, NULL, IDX_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP1_MIN); +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP1_MAX); +static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP1_CRIT); +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP1_MIN); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP1_MAX); +static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP1_CRIT); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO | S_IWUSR, + get_temp, NULL, IDX_TEMP2_INPUT); +static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP2_MIN); +static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP2_MAX); +static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP2_CRIT); +static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, + get_temp2_fault, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP2_MIN); +static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP2_MAX); +static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP2_CRIT); +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan, NULL, IDX_FAN1_INPUT); +static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR, + get_fan, set_fan, IDX_FAN1_MIN); +static SENSOR_DEVICE_ATTR(fan1_max, S_IRUGO | S_IWUSR, + get_fan, set_fan, IDX_FAN1_MAX); +static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, get_fan1_fault, NULL, 0); +static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, + get_fan1_div, set_fan1_div, 0); + +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm1, set_pwm1, 0); +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, + get_pwm1_enable, set_pwm1_enable, 0); +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IRUGO, + get_pwm1_auto_point_pwm, NULL, 0); +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, + get_pwm1_auto_point_pwm, set_pwm1_auto_point_pwm, 1); +static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IRUGO, + get_pwm1_auto_point_pwm, NULL, 2); +static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IRUGO, + get_pwm1_auto_channels_temp, NULL, 0); +static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO, + get_temp_auto_point_temp, NULL, 1, 0); +static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 1); +static SENSOR_DEVICE_ATTR_2(temp1_auto_point3_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 2); + +static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 0); +static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 1); +static SENSOR_DEVICE_ATTR_2(temp2_auto_point3_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 2); + + + +static struct attribute *amc6821_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan1_max.dev_attr.attr, + &sensor_dev_attr_fan1_fault.dev_attr.attr, + &sensor_dev_attr_fan1_div.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point3_temp.dev_attr.attr, + NULL +}; + +static struct attribute_group amc6821_attr_grp = { + .attrs = amc6821_attrs, +}; + + + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int amc6821_detect( + struct i2c_client *client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + int address = client->addr; + int dev_id, comp_id; + + dev_dbg(&adapter->dev, "amc6821_detect called.\n"); + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_dbg(&adapter->dev, + "amc6821: I2C bus doesn't support byte mode, " + "skipping.\n"); + return -ENODEV; + } + + dev_id = i2c_smbus_read_byte_data(client, AMC6821_REG_DEV_ID); + comp_id = i2c_smbus_read_byte_data(client, AMC6821_REG_COMP_ID); + if (dev_id != 0x21 || comp_id != 0x49) { + dev_dbg(&adapter->dev, + "amc6821: detection failed at 0x%02x.\n", + address); + return -ENODEV; + } + + /* Bit 7 of the address register is ignored, so we can check the + ID registers again */ + dev_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_DEV_ID); + comp_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_COMP_ID); + if (dev_id != 0x21 || comp_id != 0x49) { + dev_dbg(&adapter->dev, + "amc6821: detection failed at 0x%02x.\n", + address); + return -ENODEV; + } + + dev_info(&adapter->dev, "amc6821: chip found at 0x%02x.\n", address); + strlcpy(info->type, "amc6821", I2C_NAME_SIZE); + + return 0; +} + +static int amc6821_probe( + struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct amc6821_data *data; + int err; + + data = kzalloc(sizeof(struct amc6821_data), GFP_KERNEL); + if (!data) { + dev_err(&client->dev, "out of memory.\n"); + return -ENOMEM; + } + + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* + * Initialize the amc6821 chip + */ + err = amc6821_init_client(client); + if (err) + goto err_free; + + err = sysfs_create_group(&client->dev.kobj, &amc6821_attr_grp); + if (err) + goto err_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (!IS_ERR(data->hwmon_dev)) + return 0; + + err = PTR_ERR(data->hwmon_dev); + dev_err(&client->dev, "error registering hwmon device.\n"); + sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp); +err_free: + kfree(data); + return err; +} + +static int amc6821_remove(struct i2c_client *client) +{ + struct amc6821_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp); + + kfree(data); + + return 0; +} + + +static int amc6821_init_client(struct i2c_client *client) +{ + int config; + int err = -EIO; + + if (init) { + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4); + + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return err; + } + + config |= AMC6821_CONF4_MODE; + + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, + config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + return err; + } + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF3); + + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return err; + } + + dev_info(&client->dev, "Revision %d\n", config & 0x0f); + + config &= ~AMC6821_CONF3_THERM_FAN_EN; + + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF3, + config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + return err; + } + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF2); + + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return err; + } + + config &= ~AMC6821_CONF2_RTFIE; + config &= ~AMC6821_CONF2_LTOIE; + config &= ~AMC6821_CONF2_RTOIE; + if (i2c_smbus_write_byte_data(client, + AMC6821_REG_CONF2, config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + return err; + } + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); + + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return err; + } + + config &= ~AMC6821_CONF1_THERMOVIE; + config &= ~AMC6821_CONF1_FANIE; + config |= AMC6821_CONF1_START; + if (pwminv) + config |= AMC6821_CONF1_PWMINV; + else + config &= ~AMC6821_CONF1_PWMINV; + + if (i2c_smbus_write_byte_data( + client, AMC6821_REG_CONF1, config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + return err; + } + } + return 0; +} + + +static struct amc6821_data *amc6821_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + int timeout = HZ; + u8 reg; + int i; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + timeout) || + !data->valid) { + + for (i = 0; i < TEMP_IDX_LEN; i++) + data->temp[i] = i2c_smbus_read_byte_data(client, + temp_reg[i]); + + data->stat1 = i2c_smbus_read_byte_data(client, + AMC6821_REG_STAT1); + data->stat2 = i2c_smbus_read_byte_data(client, + AMC6821_REG_STAT2); + + data->pwm1 = i2c_smbus_read_byte_data(client, + AMC6821_REG_DCY); + for (i = 0; i < FAN1_IDX_LEN; i++) { + data->fan[i] = i2c_smbus_read_byte_data( + client, + fan_reg_low[i]); + data->fan[i] += i2c_smbus_read_byte_data( + client, + fan_reg_hi[i]) << 8; + } + data->fan1_div = i2c_smbus_read_byte_data(client, + AMC6821_REG_CONF4); + data->fan1_div = data->fan1_div & AMC6821_CONF4_PSPR ? 4 : 2; + + data->pwm1_auto_point_pwm[0] = 0; + data->pwm1_auto_point_pwm[2] = 255; + data->pwm1_auto_point_pwm[1] = i2c_smbus_read_byte_data(client, + AMC6821_REG_DCY_LOW_TEMP); + + data->temp1_auto_point_temp[0] = + i2c_smbus_read_byte_data(client, + AMC6821_REG_PSV_TEMP); + data->temp2_auto_point_temp[0] = + data->temp1_auto_point_temp[0]; + reg = i2c_smbus_read_byte_data(client, + AMC6821_REG_LTEMP_FAN_CTRL); + data->temp1_auto_point_temp[1] = (reg & 0xF8) >> 1; + reg &= 0x07; + reg = 0x20 >> reg; + if (reg > 0) + data->temp1_auto_point_temp[2] = + data->temp1_auto_point_temp[1] + + (data->pwm1_auto_point_pwm[2] - + data->pwm1_auto_point_pwm[1]) / reg; + else + data->temp1_auto_point_temp[2] = 255; + + reg = i2c_smbus_read_byte_data(client, + AMC6821_REG_RTEMP_FAN_CTRL); + data->temp2_auto_point_temp[1] = (reg & 0xF8) >> 1; + reg &= 0x07; + reg = 0x20 >> reg; + if (reg > 0) + data->temp2_auto_point_temp[2] = + data->temp2_auto_point_temp[1] + + (data->pwm1_auto_point_pwm[2] - + data->pwm1_auto_point_pwm[1]) / reg; + else + data->temp2_auto_point_temp[2] = 255; + + reg = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); + reg = (reg >> 5) & 0x3; + switch (reg) { + case 0: /*open loop: software sets pwm1*/ + data->pwm1_auto_channels_temp = 0; + data->pwm1_enable = 1; + break; + case 2: /*closed loop: remote T (temp2)*/ + data->pwm1_auto_channels_temp = 2; + data->pwm1_enable = 2; + break; + case 3: /*closed loop: local and remote T (temp2)*/ + data->pwm1_auto_channels_temp = 3; + data->pwm1_enable = 3; + break; + case 1: /*semi-open loop: software sets rpm, chip controls pwm1, + *currently not implemented + */ + data->pwm1_auto_channels_temp = 0; + data->pwm1_enable = 0; + break; + } + + data->last_updated = jiffies; + data->valid = 1; + } + mutex_unlock(&data->update_lock); + return data; +} + + +static int __init amc6821_init(void) +{ + return i2c_add_driver(&amc6821_driver); +} + +static void __exit amc6821_exit(void) +{ + i2c_del_driver(&amc6821_driver); +} + +module_init(amc6821_init); +module_exit(amc6821_exit); + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("T. Mertelj "); +MODULE_DESCRIPTION("Texas Instruments amc6821 hwmon driver"); From 74dbdd239bb1348ad86d28b18574d9c1f28b62ca Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Fri, 8 Jan 2010 14:43:05 -0800 Subject: [PATCH 0696/1626] mm: hugetlb: fix clear_huge_page() sz is in bytes, MAX_ORDER_NR_PAGES is in pages. Signed-off-by: Andrea Arcangeli Acked-by: David Gibson Cc: Mel Gorman Cc: David Rientjes Cc: Lee Schermerhorn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 65f38c218207..e91b81b63670 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -402,7 +402,7 @@ static void clear_huge_page(struct page *page, { int i; - if (unlikely(sz > MAX_ORDER_NR_PAGES)) { + if (unlikely(sz/PAGE_SIZE > MAX_ORDER_NR_PAGES)) { clear_gigantic_page(page, addr, sz); return; } From 006b4298f26984d514546fe4e53371761f66b643 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 8 Jan 2010 14:43:07 -0800 Subject: [PATCH 0697/1626] Documentation: update ring-buffer-design.txt Fix typos, grammos, spellos, hyphenation. Signed-off-by: Randy Dunlap Acked-by: Steven Rostedt Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/trace/ring-buffer-design.txt | 56 +++++++++++----------- 1 file changed, 28 insertions(+), 28 deletions(-) diff --git a/Documentation/trace/ring-buffer-design.txt b/Documentation/trace/ring-buffer-design.txt index 5b1d23d604c5..d299ff31df57 100644 --- a/Documentation/trace/ring-buffer-design.txt +++ b/Documentation/trace/ring-buffer-design.txt @@ -33,9 +33,9 @@ head_page - a pointer to the page that the reader will use next tail_page - a pointer to the page that will be written to next -commit_page - a pointer to the page with the last finished non nested write. +commit_page - a pointer to the page with the last finished non-nested write. -cmpxchg - hardware assisted atomic transaction that performs the following: +cmpxchg - hardware-assisted atomic transaction that performs the following: A = B iff previous A == C @@ -52,15 +52,15 @@ The Generic Ring Buffer The ring buffer can be used in either an overwrite mode or in producer/consumer mode. -Producer/consumer mode is where the producer were to fill up the +Producer/consumer mode is where if the producer were to fill up the buffer before the consumer could free up anything, the producer will stop writing to the buffer. This will lose most recent events. -Overwrite mode is where the produce were to fill up the buffer +Overwrite mode is where if the producer were to fill up the buffer before the consumer could free up anything, the producer will overwrite the older data. This will lose the oldest events. -No two writers can write at the same time (on the same per cpu buffer), +No two writers can write at the same time (on the same per-cpu buffer), but a writer may interrupt another writer, but it must finish writing before the previous writer may continue. This is very important to the algorithm. The writers act like a "stack". The way interrupts works @@ -79,16 +79,16 @@ the interrupt doing a write as well. Readers can happen at any time. But no two readers may run at the same time, nor can a reader preempt/interrupt another reader. A reader -can not preempt/interrupt a writer, but it may read/consume from the +cannot preempt/interrupt a writer, but it may read/consume from the buffer at the same time as a writer is writing, but the reader must be on another processor to do so. A reader may read on its own processor and can be preempted by a writer. -A writer can preempt a reader, but a reader can not preempt a writer. +A writer can preempt a reader, but a reader cannot preempt a writer. But a reader can read the buffer at the same time (on another processor) as a writer. -The ring buffer is made up of a list of pages held together by a link list. +The ring buffer is made up of a list of pages held together by a linked list. At initialization a reader page is allocated for the reader that is not part of the ring buffer. @@ -102,7 +102,7 @@ the head page. The reader has its own page to use. At start up time, this page is allocated but is not attached to the list. When the reader wants -to read from the buffer, if its page is empty (like it is on start up) +to read from the buffer, if its page is empty (like it is on start-up), it will swap its page with the head_page. The old reader page will become part of the ring buffer and the head_page will be removed. The page after the inserted page (old reader_page) will become the @@ -206,7 +206,7 @@ The main pointers: commit page - the page that last finished a write. -The commit page only is updated by the outer most writer in the +The commit page only is updated by the outermost writer in the writer stack. A writer that preempts another writer will not move the commit page. @@ -281,7 +281,7 @@ with the previous write. The commit pointer points to the last write location that was committed without preempting another write. When a write that preempted another write is committed, it only becomes a pending commit -and will not be a full commit till all writes have been committed. +and will not be a full commit until all writes have been committed. The commit page points to the page that has the last full commit. The tail page points to the page with the last write (before @@ -292,7 +292,7 @@ be several pages ahead. If the tail page catches up to the commit page then no more writes may take place (regardless of the mode of the ring buffer: overwrite and produce/consumer). -The order of pages are: +The order of pages is: head page commit page @@ -311,7 +311,7 @@ Possible scenario: There is a special case that the head page is after either the commit page and possibly the tail page. That is when the commit (and tail) page has been swapped with the reader page. This is because the head page is always -part of the ring buffer, but the reader page is not. When ever there +part of the ring buffer, but the reader page is not. Whenever there has been less than a full page that has been committed inside the ring buffer, and a reader swaps out a page, it will be swapping out the commit page. @@ -338,7 +338,7 @@ and a reader swaps out a page, it will be swapping out the commit page. In this case, the head page will not move when the tail and commit move back into the ring buffer. -The reader can not swap a page into the ring buffer if the commit page +The reader cannot swap a page into the ring buffer if the commit page is still on that page. If the read meets the last commit (real commit not pending or reserved), then there is nothing more to read. The buffer is considered empty until another full commit finishes. @@ -395,7 +395,7 @@ The main idea behind the lockless algorithm is to combine the moving of the head_page pointer with the swapping of pages with the reader. State flags are placed inside the pointer to the page. To do this, each page must be aligned in memory by 4 bytes. This will allow the 2 -least significant bits of the address to be used as flags. Since +least significant bits of the address to be used as flags, since they will always be zero for the address. To get the address, simply mask out the flags. @@ -460,7 +460,7 @@ When the reader tries to swap the page with the ring buffer, it will also use cmpxchg. If the flag bit in the pointer to the head page does not have the HEADER flag set, the compare will fail and the reader will need to look for the new head page and try again. -Note, the flag UPDATE and HEADER are never set at the same time. +Note, the flags UPDATE and HEADER are never set at the same time. The reader swaps the reader page as follows: @@ -539,7 +539,7 @@ updated to the reader page. | +-----------------------------+ | +------------------------------------+ -Another important point. The page that the reader page points back to +Another important point: The page that the reader page points back to by its previous pointer (the one that now points to the new head page) never points back to the reader page. That is because the reader page is not part of the ring buffer. Traversing the ring buffer via the next pointers @@ -572,7 +572,7 @@ not be able to swap the head page from the buffer, nor will it be able to move the head page, until the writer is finished with the move. This eliminates any races that the reader can have on the writer. The reader -must spin, and this is why the reader can not preempt the writer. +must spin, and this is why the reader cannot preempt the writer. tail page | @@ -659,9 +659,9 @@ before pushing the head page. If it is, then it can be assumed that the tail page wrapped the buffer, and we must drop new writes. This is not a race condition, because the commit page can only be moved -by the outter most writer (the writer that was preempted). +by the outermost writer (the writer that was preempted). This means that the commit will not move while a writer is moving the -tail page. The reader can not swap the reader page if it is also being +tail page. The reader cannot swap the reader page if it is also being used as the commit page. The reader can simply check that the commit is off the reader page. Once the commit page leaves the reader page it will never go back on it unless a reader does another swap with the @@ -733,7 +733,7 @@ The write converts the head page pointer to UPDATE. --->| |<---| |<---| |<---| |<--- +---+ +---+ +---+ +---+ -But if a nested writer preempts here. It will see that the next +But if a nested writer preempts here, it will see that the next page is a head page, but it is also nested. It will detect that it is nested and will save that information. The detection is the fact that it sees the UPDATE flag instead of a HEADER or NORMAL @@ -761,7 +761,7 @@ to NORMAL. --->| |<---| |<---| |<---| |<--- +---+ +---+ +---+ +---+ -After the nested writer finishes, the outer most writer will convert +After the nested writer finishes, the outermost writer will convert the UPDATE pointer to NORMAL. @@ -812,7 +812,7 @@ head page. +---+ +---+ +---+ +---+ The nested writer moves the tail page forward. But does not set the old -update page to NORMAL because it is not the outer most writer. +update page to NORMAL because it is not the outermost writer. tail page | @@ -892,7 +892,7 @@ It will return to the first writer. --->| |<---| |<---| |<---| |<--- +---+ +---+ +---+ +---+ -The first writer can not know atomically test if the tail page moved +The first writer cannot know atomically if the tail page moved while it updates the HEAD page. It will then update the head page to what it thinks is the new head page. @@ -923,9 +923,9 @@ if the tail page is either where it use to be or on the next page: --->| |<---| |<---| |<---| |<--- +---+ +---+ +---+ +---+ -If tail page != A and tail page does not equal B, then it must reset the -pointer back to NORMAL. The fact that it only needs to worry about -nested writers, it only needs to check this after setting the HEAD page. +If tail page != A and tail page != B, then it must reset the pointer +back to NORMAL. The fact that it only needs to worry about nested +writers means that it only needs to check this after setting the HEAD page. (first writer) @@ -939,7 +939,7 @@ nested writers, it only needs to check this after setting the HEAD page. +---+ +---+ +---+ +---+ Now the writer can update the head page. This is also why the head page must -remain in UPDATE and only reset by the outer most writer. This prevents +remain in UPDATE and only reset by the outermost writer. This prevents the reader from seeing the incorrect head page. From 5787536edf18e33d06e2bf038bfd0910f4def213 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 8 Jan 2010 14:43:08 -0800 Subject: [PATCH 0698/1626] drivers/cpuidle/governors/menu.c: fix undefined reference to `__udivdi3' menu: use proper 64 bit math The new menu governor is incorrectly doing a 64 bit divide. Compile tested only Signed-off-by: Stephen Hemminger Cc: Arjan van de Ven Cc: Len Brown Cc: Venkatesh Pallipadi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/cpuidle/governors/menu.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index 68104434ebb5..73655aeb3a60 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -18,6 +18,7 @@ #include #include #include +#include #define BUCKETS 12 #define RESOLUTION 1024 @@ -169,6 +170,12 @@ static DEFINE_PER_CPU(struct menu_device, menu_devices); static void menu_update(struct cpuidle_device *dev); +/* This implements DIV_ROUND_CLOSEST but avoids 64 bit division */ +static u64 div_round64(u64 dividend, u32 divisor) +{ + return div_u64(dividend + (divisor / 2), divisor); +} + /** * menu_select - selects the next idle state to enter * @dev: the CPU @@ -209,9 +216,8 @@ static int menu_select(struct cpuidle_device *dev) data->correction_factor[data->bucket] = RESOLUTION * DECAY; /* Make sure to round up for half microseconds */ - data->predicted_us = DIV_ROUND_CLOSEST( - data->expected_us * data->correction_factor[data->bucket], - RESOLUTION * DECAY); + data->predicted_us = div_round64(data->expected_us * data->correction_factor[data->bucket], + RESOLUTION * DECAY); /* * We want to default to C1 (hlt), not to busy polling From 80884094e34456887ecdbd107d40e72c4a40f9c9 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 8 Jan 2010 14:43:08 -0800 Subject: [PATCH 0699/1626] gpio: adp5588-gpio: new driver for ADP5588 GPIO expanders Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Cc: Jean Delvare Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/Kconfig | 9 ++ drivers/gpio/Makefile | 1 + drivers/gpio/adp5588-gpio.c | 266 ++++++++++++++++++++++++++++++++++++ include/linux/i2c/adp5588.h | 12 ++ 4 files changed, 288 insertions(+) create mode 100644 drivers/gpio/adp5588-gpio.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index a019b49ecc9b..1f1d88ae68d6 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -172,6 +172,15 @@ config GPIO_ADP5520 To compile this driver as a module, choose M here: the module will be called adp5520-gpio. +config GPIO_ADP5588 + tristate "ADP5588 I2C GPIO expander" + depends on I2C + help + This option enables support for 18 GPIOs found + on Analog Devices ADP5588 GPIO Expanders. + To compile this driver as a module, choose M here: the module will be + called adp5588-gpio. + comment "PCI GPIO expanders:" config GPIO_CS5535 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 52fe4cf734c7..48687238edb1 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -5,6 +5,7 @@ ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG obj-$(CONFIG_GPIOLIB) += gpiolib.o obj-$(CONFIG_GPIO_ADP5520) += adp5520-gpio.o +obj-$(CONFIG_GPIO_ADP5588) += adp5588-gpio.o obj-$(CONFIG_GPIO_LANGWELL) += langwell_gpio.o obj-$(CONFIG_GPIO_MAX7301) += max7301.o obj-$(CONFIG_GPIO_MAX732X) += max732x.o diff --git a/drivers/gpio/adp5588-gpio.c b/drivers/gpio/adp5588-gpio.c new file mode 100644 index 000000000000..afc097a16b33 --- /dev/null +++ b/drivers/gpio/adp5588-gpio.c @@ -0,0 +1,266 @@ +/* + * GPIO Chip driver for Analog Devices + * ADP5588 I/O Expander and QWERTY Keypad Controller + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include + +#include + +#define DRV_NAME "adp5588-gpio" +#define MAXGPIO 18 +#define ADP_BANK(offs) ((offs) >> 3) +#define ADP_BIT(offs) (1u << ((offs) & 0x7)) + +struct adp5588_gpio { + struct i2c_client *client; + struct gpio_chip gpio_chip; + struct mutex lock; /* protect cached dir, dat_out */ + unsigned gpio_start; + uint8_t dat_out[3]; + uint8_t dir[3]; +}; + +static int adp5588_gpio_read(struct i2c_client *client, u8 reg) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) + dev_err(&client->dev, "Read Error\n"); + + return ret; +} + +static int adp5588_gpio_write(struct i2c_client *client, u8 reg, u8 val) +{ + int ret = i2c_smbus_write_byte_data(client, reg, val); + + if (ret < 0) + dev_err(&client->dev, "Write Error\n"); + + return ret; +} + +static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off) +{ + struct adp5588_gpio *dev = + container_of(chip, struct adp5588_gpio, gpio_chip); + + return !!(adp5588_gpio_read(dev->client, GPIO_DAT_STAT1 + ADP_BANK(off)) + & ADP_BIT(off)); +} + +static void adp5588_gpio_set_value(struct gpio_chip *chip, + unsigned off, int val) +{ + unsigned bank, bit; + struct adp5588_gpio *dev = + container_of(chip, struct adp5588_gpio, gpio_chip); + + bank = ADP_BANK(off); + bit = ADP_BIT(off); + + mutex_lock(&dev->lock); + if (val) + dev->dat_out[bank] |= bit; + else + dev->dat_out[bank] &= ~bit; + + adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank, + dev->dat_out[bank]); + mutex_unlock(&dev->lock); +} + +static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off) +{ + int ret; + unsigned bank; + struct adp5588_gpio *dev = + container_of(chip, struct adp5588_gpio, gpio_chip); + + bank = ADP_BANK(off); + + mutex_lock(&dev->lock); + dev->dir[bank] &= ~ADP_BIT(off); + ret = adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, dev->dir[bank]); + mutex_unlock(&dev->lock); + + return ret; +} + +static int adp5588_gpio_direction_output(struct gpio_chip *chip, + unsigned off, int val) +{ + int ret; + unsigned bank, bit; + struct adp5588_gpio *dev = + container_of(chip, struct adp5588_gpio, gpio_chip); + + bank = ADP_BANK(off); + bit = ADP_BIT(off); + + mutex_lock(&dev->lock); + dev->dir[bank] |= bit; + + if (val) + dev->dat_out[bank] |= bit; + else + dev->dat_out[bank] &= ~bit; + + ret = adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank, + dev->dat_out[bank]); + ret |= adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, + dev->dir[bank]); + mutex_unlock(&dev->lock); + + return ret; +} + +static int __devinit adp5588_gpio_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adp5588_gpio_platform_data *pdata = client->dev.platform_data; + struct adp5588_gpio *dev; + struct gpio_chip *gc; + int ret, i, revid; + + if (pdata == NULL) { + dev_err(&client->dev, "missing platform data\n"); + return -ENODEV; + } + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); + return -EIO; + } + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + dev_err(&client->dev, "failed to alloc memory\n"); + return -ENOMEM; + } + + dev->client = client; + + gc = &dev->gpio_chip; + gc->direction_input = adp5588_gpio_direction_input; + gc->direction_output = adp5588_gpio_direction_output; + gc->get = adp5588_gpio_get_value; + gc->set = adp5588_gpio_set_value; + gc->can_sleep = 1; + + gc->base = pdata->gpio_start; + gc->ngpio = MAXGPIO; + gc->label = client->name; + gc->owner = THIS_MODULE; + + mutex_init(&dev->lock); + + + ret = adp5588_gpio_read(dev->client, DEV_ID); + if (ret < 0) + goto err; + + revid = ret & ADP5588_DEVICE_ID_MASK; + + for (i = 0, ret = 0; i <= ADP_BANK(MAXGPIO); i++) { + dev->dat_out[i] = adp5588_gpio_read(client, GPIO_DAT_OUT1 + i); + dev->dir[i] = adp5588_gpio_read(client, GPIO_DIR1 + i); + ret |= adp5588_gpio_write(client, KP_GPIO1 + i, 0); + ret |= adp5588_gpio_write(client, GPIO_PULL1 + i, + (pdata->pullup_dis_mask >> (8 * i)) & 0xFF); + + if (ret) + goto err; + } + + ret = gpiochip_add(&dev->gpio_chip); + if (ret) + goto err; + + dev_info(&client->dev, "gpios %d..%d on a %s Rev. %d\n", + gc->base, gc->base + gc->ngpio - 1, + client->name, revid); + + if (pdata->setup) { + ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context); + if (ret < 0) + dev_warn(&client->dev, "setup failed, %d\n", ret); + } + + i2c_set_clientdata(client, dev); + return 0; + +err: + kfree(dev); + return ret; +} + +static int __devexit adp5588_gpio_remove(struct i2c_client *client) +{ + struct adp5588_gpio_platform_data *pdata = client->dev.platform_data; + struct adp5588_gpio *dev = i2c_get_clientdata(client); + int ret; + + if (pdata->teardown) { + ret = pdata->teardown(client, + dev->gpio_chip.base, dev->gpio_chip.ngpio, + pdata->context); + if (ret < 0) { + dev_err(&client->dev, "teardown failed %d\n", ret); + return ret; + } + } + + ret = gpiochip_remove(&dev->gpio_chip); + if (ret) { + dev_err(&client->dev, "gpiochip_remove failed %d\n", ret); + return ret; + } + + kfree(dev); + return 0; +} + +static const struct i2c_device_id adp5588_gpio_id[] = { + {DRV_NAME, 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, adp5588_gpio_id); + +static struct i2c_driver adp5588_gpio_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = adp5588_gpio_probe, + .remove = __devexit_p(adp5588_gpio_remove), + .id_table = adp5588_gpio_id, +}; + +static int __init adp5588_gpio_init(void) +{ + return i2c_add_driver(&adp5588_gpio_driver); +} + +module_init(adp5588_gpio_init); + +static void __exit adp5588_gpio_exit(void) +{ + i2c_del_driver(&adp5588_gpio_driver); +} + +module_exit(adp5588_gpio_exit); + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("GPIO ADP5588 Driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h index fc5db826b48e..02c9af374741 100644 --- a/include/linux/i2c/adp5588.h +++ b/include/linux/i2c/adp5588.h @@ -89,4 +89,16 @@ struct adp5588_kpad_platform_data { unsigned short unlock_key2; /* Unlock Key 2 */ }; +struct adp5588_gpio_platform_data { + unsigned gpio_start; /* GPIO Chip base # */ + unsigned pullup_dis_mask; /* Pull-Up Disable Mask */ + int (*setup)(struct i2c_client *client, + int gpio, unsigned ngpio, + void *context); + int (*teardown)(struct i2c_client *client, + int gpio, unsigned ngpio, + void *context); + void *context; +}; + #endif From d2b34e20c1f431604e0dde910c3ff271c84ed706 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 8 Jan 2010 14:43:09 -0800 Subject: [PATCH 0700/1626] documentation: update kernel-doc-nano-HOWTO information Remove comments about function short descriptions not allowed to be on multiple lines (that was fixed/changed recently). Add comments that function "section header:" names need to be unique per function/struct/union/typedef/enum. Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/kernel-doc-nano-HOWTO.txt | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt index 348b9e5e28fc..27a52b35d55b 100644 --- a/Documentation/kernel-doc-nano-HOWTO.txt +++ b/Documentation/kernel-doc-nano-HOWTO.txt @@ -214,11 +214,13 @@ The format of the block comment is like this: * (section header: (section description)? )* (*)?*/ -The short function description ***cannot be multiline***, but the other -descriptions can be (and they can contain blank lines). If you continue -that initial short description onto a second line, that second line will -appear further down at the beginning of the description section, which is -almost certainly not what you had in mind. +All "description" text can span multiple lines, although the +function_name & its short description are traditionally on a single line. +Description text may also contain blank lines (i.e., lines that contain +only a "*"). + +"section header:" names must be unique per function (or struct, +union, typedef, enum). Avoid putting a spurious blank line after the function name, or else the description will be repeated! From 7f53a09ed40f08416b3029ada8f02252e7596c18 Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Fri, 8 Jan 2010 14:43:10 -0800 Subject: [PATCH 0701/1626] smaps: fix wrong rss count A long time ago we regarded zero page as file_rss and vm_normal_page doesn't return NULL. But now, we reinstated ZERO_PAGE and vm_normal_page's implementation can return NULL in case of zero page. Also we don't count it with file_rss any more. Then, RSS and PSS can't be matched. For consistency, Let's ignore zero page in smaps_pte_range. Signed-off-by: Minchan Kim Acked-by: KAMEZAWA Hiroyuki Acked-by: Hugh Dickins Acked-by: Matt Mackall Reviewed-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/task_mmu.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 47c03f4336b8..f277c4a111cb 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -361,12 +361,11 @@ static int smaps_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, if (!pte_present(ptent)) continue; - mss->resident += PAGE_SIZE; - page = vm_normal_page(vma, addr, ptent); if (!page) continue; + mss->resident += PAGE_SIZE; /* Accumulate the size in pages that have been accessed. */ if (pte_young(ptent) || PageReferenced(page)) mss->referenced += PAGE_SIZE; From 004731b2c7c658d36bee167cb1e1a399c2cbccc9 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Fri, 8 Jan 2010 14:43:11 -0800 Subject: [PATCH 0702/1626] rtc_cmos: convert shutdown to new pnp_driver->shutdown MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit abd6633c67925f90775bb74755f9c547e30f1f20 ("pnp: add a shutdown method to pnp drivers") adds shutdown method to bus driver blindly. With it, driver->shutdown is no longer valid. Use pnp_driver->shutdown instead. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14889 Signed-off-by: OGAWA Hirofumi Reported-by: Malte Schröder Cc: "Rafael J. Wysocki" Cc: Bjorn Helgaas Cc: David Hardeman Cc: Dmitry Torokhov Cc: Alessandro Zummo Cc: Paul Gortmaker Cc: [2.6.32.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-cmos.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index c8c12325e69b..e9aa814ddd23 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -1096,9 +1096,9 @@ static int cmos_pnp_resume(struct pnp_dev *pnp) #define cmos_pnp_resume NULL #endif -static void cmos_pnp_shutdown(struct device *pdev) +static void cmos_pnp_shutdown(struct pnp_dev *pnp) { - if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(pdev)) + if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(&pnp->dev)) return; cmos_do_shutdown(); @@ -1117,15 +1117,12 @@ static struct pnp_driver cmos_pnp_driver = { .id_table = rtc_ids, .probe = cmos_pnp_probe, .remove = __exit_p(cmos_pnp_remove), + .shutdown = cmos_pnp_shutdown, /* flag ensures resume() gets called, and stops syslog spam */ .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, .suspend = cmos_pnp_suspend, .resume = cmos_pnp_resume, - .driver = { - .name = (char *)driver_name, - .shutdown = cmos_pnp_shutdown, - } }; #endif /* CONFIG_PNP */ From 4c03ee7352f2f0ee393c7190ce0b758dd1217f57 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Fri, 8 Jan 2010 14:43:14 -0800 Subject: [PATCH 0703/1626] mn10300: signal stack fix This fixes a signal stack handling problem in the MN10300 arch. When new threads are cloned with CLONE_VM, they don't inherit the alternate signal stack. They do share the signal flags, though. When deciding whether to use an alternate stack, the arch code needs to check to make sure the task struct contains a valid alternate stack. This patch fixes the MN10300 arch by using the sas_ss_flags() test provided by sched.h rather than the on_sig_stack() test which is insufficient by itself. Signed-off-by: Mark Salter Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/signal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c index a21f43bc68e2..717db14c2cc3 100644 --- a/arch/mn10300/kernel/signal.c +++ b/arch/mn10300/kernel/signal.c @@ -264,7 +264,7 @@ static inline void __user *get_sigframe(struct k_sigaction *ka, /* this is the X/Open sanctioned signal stack switching. */ if (ka->sa.sa_flags & SA_ONSTACK) { - if (!on_sig_stack(sp)) + if (sas_ss_flags(sp) == 0) sp = current->sas_ss_sp + current->sas_ss_size; } From b0641e86fbc722906e323b2c2a069e65f44ff484 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Fri, 8 Jan 2010 14:43:15 -0800 Subject: [PATCH 0704/1626] mn10300: objcopy flags fix The gcc-4.2.1 based toolchain for MN10300 adds some new note sections which need to be stripped from the binary image. This patch takes care of that. Signed-off-by: Mark Salter Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile index dd0c8ff52a68..ac5c6bdb2f05 100644 --- a/arch/mn10300/Makefile +++ b/arch/mn10300/Makefile @@ -19,7 +19,7 @@ CCDIR := $(strip $(patsubst %/specs,%,$(CCSPECS))) KBUILD_CPPFLAGS += -nostdinc -I$(CCDIR)/include LDFLAGS := -OBJCOPYFLAGS := -O binary -R .note -R .comment -S +OBJCOPYFLAGS := -O binary -R .note -R .comment -R .GCC-command-line -R .note.gnu.build-id -S #LDFLAGS_vmlinux := -Map linkmap.txt CHECKFLAGS += From d6bb7a1ad326f56f0793353c59348554f84b513c Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Fri, 8 Jan 2010 14:43:16 -0800 Subject: [PATCH 0705/1626] mn10300: add cc clobbers to asm statements gcc 4.2.1 for MN10300 is more agressive than the older gcc in reordering/moving other insns between an insn that sets flags and an insn that uses those flags. This leads to trouble with asm statements which are missing an explicit "cc" clobber. This patch adds the explicit "cc" clobber to asm statements which do indeed clobber the condition flags. Signed-off-by: Mark Salter Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/include/asm/bitops.h | 4 ++-- arch/mn10300/include/asm/div64.h | 2 ++ arch/mn10300/include/asm/system.h | 1 + arch/mn10300/include/asm/tlbflush.h | 2 +- arch/mn10300/include/asm/uaccess.h | 4 ++-- arch/mn10300/kernel/mn10300-serial.c | 3 ++- arch/mn10300/lib/checksum.c | 1 + arch/mn10300/lib/delay.c | 3 ++- arch/mn10300/lib/usercopy.c | 6 +++--- arch/mn10300/mm/misalignment.c | 4 ++-- 10 files changed, 18 insertions(+), 12 deletions(-) diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h index 0b610f482abb..f49ac49e09ad 100644 --- a/arch/mn10300/include/asm/bitops.h +++ b/arch/mn10300/include/asm/bitops.h @@ -165,7 +165,7 @@ static inline __attribute__((const)) unsigned long __ffs(unsigned long x) { int bit; - asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x)); + asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x) : "cc"); return bit; } @@ -177,7 +177,7 @@ static inline __attribute__((const)) int __ilog2_u32(u32 n) { int bit; - asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n)); + asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n) : "cc"); return bit; } diff --git a/arch/mn10300/include/asm/div64.h b/arch/mn10300/include/asm/div64.h index 3a8329b3e869..34dcb8e68309 100644 --- a/arch/mn10300/include/asm/div64.h +++ b/arch/mn10300/include/asm/div64.h @@ -72,6 +72,7 @@ unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div) * MDR = MDR:val%div */ : "=r"(result) : "0"(val), "ir"(mult), "r"(div) + : "cc" ); return result; @@ -92,6 +93,7 @@ signed __muldiv64s(signed val, signed mult, signed div) * MDR = MDR:val%div */ : "=r"(result) : "0"(val), "ir"(mult), "r"(div) + : "cc" ); return result; diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h index 8214fb7e7fe4..3636c054dcd5 100644 --- a/arch/mn10300/include/asm/system.h +++ b/arch/mn10300/include/asm/system.h @@ -143,6 +143,7 @@ do { \ " mov %0,epsw \n" \ : "=&d"(tmp) \ : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \ + : "cc" \ ); \ } while (0) diff --git a/arch/mn10300/include/asm/tlbflush.h b/arch/mn10300/include/asm/tlbflush.h index e0239865abcb..1a7e29281c5d 100644 --- a/arch/mn10300/include/asm/tlbflush.h +++ b/arch/mn10300/include/asm/tlbflush.h @@ -22,7 +22,7 @@ do { \ " mov %0,%1 \n" \ : "=d"(w) \ : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \ - : "memory" \ + : "cc", "memory" \ ); \ } while (0) diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h index 167e10ff06d9..197a7af3dd8a 100644 --- a/arch/mn10300/include/asm/uaccess.h +++ b/arch/mn10300/include/asm/uaccess.h @@ -316,7 +316,7 @@ do { \ " .previous\n" \ : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\ : "0"(__from), "1"(__to), "2"(size) \ - : "memory"); \ + : "cc", "memory"); \ } \ } while (0) @@ -352,7 +352,7 @@ do { \ " .previous\n" \ : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\ : "0"(__from), "1"(__to), "2"(size) \ - : "memory"); \ + : "cc", "memory"); \ } \ } while (0) diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c index 229b710fc5d5..ef34d5a0f8bd 100644 --- a/arch/mn10300/kernel/mn10300-serial.c +++ b/arch/mn10300/kernel/mn10300-serial.c @@ -380,7 +380,8 @@ static int mask_test_and_clear(volatile u8 *ptr, u8 mask) u32 epsw; asm volatile(" bclr %1,(%2) \n" " mov epsw,%0 \n" - : "=d"(epsw) : "d"(mask), "a"(ptr)); + : "=d"(epsw) : "d"(mask), "a"(ptr) + : "cc", "memory"); return !(epsw & EPSW_FLAG_Z); } diff --git a/arch/mn10300/lib/checksum.c b/arch/mn10300/lib/checksum.c index 274f29ec33c1..b6580f5d89ee 100644 --- a/arch/mn10300/lib/checksum.c +++ b/arch/mn10300/lib/checksum.c @@ -22,6 +22,7 @@ static inline unsigned short from32to16(__wsum sum) " addc 0xffff,%0 \n" : "=r" (sum) : "r" (sum << 16), "0" (sum & 0xffff0000) + : "cc" ); return sum >> 16; } diff --git a/arch/mn10300/lib/delay.c b/arch/mn10300/lib/delay.c index cce66bc0822d..fdf6f710f94e 100644 --- a/arch/mn10300/lib/delay.c +++ b/arch/mn10300/lib/delay.c @@ -28,7 +28,8 @@ void __delay(unsigned long loops) "2: add -1,%0 \n" " bne 2b \n" : "=&d" (d0) - : "0" (loops)); + : "0" (loops) + : "cc"); } EXPORT_SYMBOL(__delay); diff --git a/arch/mn10300/lib/usercopy.c b/arch/mn10300/lib/usercopy.c index a75b203059c1..7826e6c364e7 100644 --- a/arch/mn10300/lib/usercopy.c +++ b/arch/mn10300/lib/usercopy.c @@ -62,7 +62,7 @@ do { \ " .previous" \ :"=&r"(res), "=r"(count), "=&r"(w) \ :"i"(-EFAULT), "1"(count), "a"(src), "a"(dst) \ - :"memory"); \ + : "memory", "cc"); \ } while (0) long @@ -109,7 +109,7 @@ do { \ ".previous\n" \ : "+r"(size), "=&r"(w) \ : "a"(addr), "d"(0) \ - : "memory"); \ + : "memory", "cc"); \ } while (0) unsigned long @@ -161,6 +161,6 @@ long strnlen_user(const char *s, long n) ".previous\n" :"=d"(res), "=&r"(w) :"0"(0), "a"(s), "r"(n) - :"memory"); + : "memory", "cc"); return res; } diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 30016251f658..6dffbf97ac26 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -633,13 +633,13 @@ static int misalignment_addr(unsigned long *registers, unsigned long sp, goto displace_or_inc; case SD24: tmp = disp << 8; - asm("asr 8,%0" : "=r"(tmp) : "0"(tmp)); + asm("asr 8,%0" : "=r"(tmp) : "0"(tmp) : "cc"); disp = (long) tmp; goto displace_or_inc; case SIMM4_2: tmp = opcode >> 4 & 0x0f; tmp <<= 28; - asm("asr 28,%0" : "=r"(tmp) : "0"(tmp)); + asm("asr 28,%0" : "=r"(tmp) : "0"(tmp) : "cc"); disp = (long) tmp; goto displace_or_inc; case IMM8: From e5d20d01023e76f3c1289cfca2e3305de7ff9e69 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 8 Jan 2010 14:43:17 -0800 Subject: [PATCH 0706/1626] mn10300: wire up missing new syscalls Wire up missing new system calls for MN10300. Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/include/asm/unistd.h | 3 ++- arch/mn10300/kernel/entry.S | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h index 2a983931c11f..c05acb95c2a9 100644 --- a/arch/mn10300/include/asm/unistd.h +++ b/arch/mn10300/include/asm/unistd.h @@ -348,10 +348,11 @@ #define __NR_pwritev 335 #define __NR_rt_tgsigqueueinfo 336 #define __NR_perf_event_open 337 +#define __NR_recvmmsg 338 #ifdef __KERNEL__ -#define NR_syscalls 338 +#define NR_syscalls 339 /* * specify the deprecated syscalls we want to support on this arch diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index c9ee6c009d79..88e3e1c3cc21 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -724,6 +724,7 @@ ENTRY(sys_call_table) .long sys_pwritev /* 335 */ .long sys_rt_tgsigqueueinfo .long sys_perf_event_open + .long sys_recvmmsg nr_syscalls=(.-sys_call_table)/4 From 07c706a6226ea7556a41fced300248d1daac90db Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 8 Jan 2010 14:43:17 -0800 Subject: [PATCH 0707/1626] mn10300: fix several bogus includes on abs2305 asm/cpu never existed for mn10300; the files they are looking for are in asm. Signed-off-by: Al Viro Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/unit-asb2305/include/unit/serial.h | 2 +- arch/mn10300/unit-asb2305/include/unit/timex.h | 2 +- arch/mn10300/unit-asb2305/leds.c | 4 ++-- arch/mn10300/unit-asb2305/unit-init.c | 5 ++--- 4 files changed, 6 insertions(+), 7 deletions(-) diff --git a/arch/mn10300/unit-asb2305/include/unit/serial.h b/arch/mn10300/unit-asb2305/include/unit/serial.h index 3bfc90938787..8086cc092cec 100644 --- a/arch/mn10300/unit-asb2305/include/unit/serial.h +++ b/arch/mn10300/unit-asb2305/include/unit/serial.h @@ -11,7 +11,7 @@ #ifndef _ASM_UNIT_SERIAL_H #define _ASM_UNIT_SERIAL_H -#include +#include #include #include diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h index a71c49aa85eb..d1c72d59fa9f 100644 --- a/arch/mn10300/unit-asb2305/include/unit/timex.h +++ b/arch/mn10300/unit-asb2305/include/unit/timex.h @@ -15,7 +15,7 @@ #include #endif /* __ASSEMBLY__ */ -#include +#include #include /* diff --git a/arch/mn10300/unit-asb2305/leds.c b/arch/mn10300/unit-asb2305/leds.c index d345ff9042d5..6f8de9954026 100644 --- a/arch/mn10300/unit-asb2305/leds.c +++ b/arch/mn10300/unit-asb2305/leds.c @@ -13,8 +13,8 @@ #include #include #include -#include -#include +#include +#include #include static const u8 asb2305_led_hex_tbl[16] = { diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c index 1c452cc3f6e9..a76c8e0ab90f 100644 --- a/arch/mn10300/unit-asb2305/unit-init.c +++ b/arch/mn10300/unit-asb2305/unit-init.c @@ -15,9 +15,8 @@ #include #include #include -#include -#include -#include +#include +#include #include /* From e716381f9f4ea65df2e2a911275b47ed6ae53d4b Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 8 Jan 2010 14:43:18 -0800 Subject: [PATCH 0708/1626] mn10300: use KERN_ERR not KERN_ERROR Use KERN_ERR not KERN_ERROR in the ASB2305 platform code. Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/unit-asb2305/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index 07dbbcda3b2e..082590f5af15 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -279,7 +279,7 @@ static int __init pci_sanity_check(struct pci_ops *o) (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ))) return 1; - printk(KERN_ERROR "PCI: Sanity check failed\n"); + printk(KERN_ERR "PCI: Sanity check failed\n"); return 0; } From 126cda50468d26c4c67f20c51a800685d42d1c61 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 8 Jan 2010 14:43:19 -0800 Subject: [PATCH 0709/1626] mn10300: use generic pci_enable_resources() Use the generic pci_enable_resources() instead of the arch-specific code. Unlike this arch-specific code, the generic version: - checks PCI_NUM_RESOURCES (11), not 6, resources - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set - skips ROM resources unless IORESOURCE_ROM_ENABLE is set - checks for resource collisions with "!r->parent" Signed-off-by: Bjorn Helgaas Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/unit-asb2305/pci-asb2305.c | 39 ------------------------- arch/mn10300/unit-asb2305/pci-asb2305.h | 1 - arch/mn10300/unit-asb2305/pci.c | 3 +- 3 files changed, 2 insertions(+), 41 deletions(-) diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c index d100ca788468..78cd134ddf7d 100644 --- a/arch/mn10300/unit-asb2305/pci-asb2305.c +++ b/arch/mn10300/unit-asb2305/pci-asb2305.c @@ -218,45 +218,6 @@ void __init pcibios_resource_survey(void) pcibios_allocate_resources(1); } -int pcibios_enable_resources(struct pci_dev *dev, int mask) -{ - u16 cmd, old_cmd; - int idx; - struct resource *r; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - - for (idx = 0; idx < 6; idx++) { - /* Only set up the requested stuff */ - if (!(mask & (1 << idx))) - continue; - - r = &dev->resource[idx]; - - if (!r->start && r->end) { - printk(KERN_ERR - "PCI: Device %s not available because of" - " resource collisions\n", - pci_name(dev)); - return -EINVAL; - } - - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - - if (dev->resource[PCI_ROM_RESOURCE].start) - cmd |= PCI_COMMAND_MEMORY; - - if (cmd != old_cmd) - pci_write_config_word(dev, PCI_COMMAND, cmd); - - return 0; -} - /* * If we set up a device for bus mastering, we need to check the latency * timer as certain crappy BIOSes forget to set it properly. diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.h b/arch/mn10300/unit-asb2305/pci-asb2305.h index 9763d1ce343a..c3fa294b6e28 100644 --- a/arch/mn10300/unit-asb2305/pci-asb2305.h +++ b/arch/mn10300/unit-asb2305/pci-asb2305.h @@ -34,7 +34,6 @@ extern unsigned int pci_probe; extern unsigned int pcibios_max_latency; extern void pcibios_resource_survey(void); -extern int pcibios_enable_resources(struct pci_dev *dev, int mask); /* pci.c */ diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index 082590f5af15..02527ce10cb2 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -440,7 +440,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) { int err; - err = pcibios_enable_resources(dev, mask); + err = pci_enable_resources(dev, mask); if (err == 0) pcibios_enable_irq(dev); return err; @@ -455,6 +455,7 @@ static void __init unit_disable_pcnet(struct pci_bus *bus, struct pci_ops *o) bus->number = 0; + o->read (bus, PCI_DEVFN(2, 0), PCI_VENDOR_ID, 4, &x); o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, &x); x |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | From 112b4a0bf1080b3d40a2d3b3982361229b25e72d Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 8 Jan 2010 14:43:20 -0800 Subject: [PATCH 0710/1626] mn10300: insert PCI root bus resources for the ASB2305 devel motherboard Insert PCI root bus resources for the MN10300-based ASB2305 development kit motherboard. This is required because the CPU's window onto the PCI bus address space is considerably smaller than the CPU's full address space and non-PCI devices lie outside of the PCI window that we might want to access. Without this patch, the PCI root bus uses the platform-level bus resources, and these are then confined to the PCI window, thus making platform_device_add() reject devices outside of this window. We also add a reservation for the PCI SRAM region. Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/unit-asb2305/pci.c | 57 ++++++++++++++++++++------------- 1 file changed, 35 insertions(+), 22 deletions(-) diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index 02527ce10cb2..2cb7e75ba1c0 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -26,6 +26,29 @@ int pcibios_last_bus = -1; struct pci_bus *pci_root_bus; struct pci_ops *pci_root_ops; +/* + * The accessible PCI window does not cover the entire CPU address space, but + * there are devices we want to access outside of that window, so we need to + * insert specific PCI bus resources instead of using the platform-level bus + * resources directly for the PCI root bus. + * + * These are configured and inserted by pcibios_init() and are attached to the + * root bus by pcibios_fixup_bus(). + */ +static struct resource pci_ioport_resource = { + .name = "PCI IO", + .start = 0xbe000000, + .end = 0xbe03ffff, + .flags = IORESOURCE_IO, +}; + +static struct resource pci_iomem_resource = { + .name = "PCI mem", + .start = 0xb8000000, + .end = 0xbbffffff, + .flags = IORESOURCE_MEM, +}; + /* * Functions for accessing PCI configuration space */ @@ -297,6 +320,7 @@ static int __init pci_check_direct(void) printk(KERN_INFO "PCI: Using configuration ampci\n"); request_mem_region(0xBE040000, 256, "AMPCI bridge"); request_mem_region(0xBFFFFFF4, 12, "PCI ampci"); + request_mem_region(0xBC000000, 32 * 1024 * 1024, "PCI SRAM"); return 0; } @@ -358,6 +382,11 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) { struct pci_dev *dev; + if (bus->number == 0) { + bus->resource[0] = &pci_ioport_resource; + bus->resource[1] = &pci_iomem_resource; + } + if (bus->self) { pci_read_bridge_bases(bus); pcibios_fixup_device_resources(bus->self); @@ -380,6 +409,11 @@ static int __init pcibios_init(void) iomem_resource.start = 0xA0000000; iomem_resource.end = 0xDFFFFFFF; + if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0) + panic("Unable to insert PCI IOMEM resource\n"); + if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0) + panic("Unable to insert PCI IOPORT resource\n"); + if (!pci_probe) return 0; @@ -391,32 +425,11 @@ static int __init pcibios_init(void) printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n", MEM_PAGING_REG); - { -#if 0 - static struct pci_bus am33_root_bus = { - .children = LIST_HEAD_INIT(am33_root_bus.children), - .devices = LIST_HEAD_INIT(am33_root_bus.devices), - .number = 0, - .secondary = 0, - .resource = { &ioport_resource, &iomem_resource }, - }; - - am33_root_bus.ops = pci_root_ops; - list_add_tail(&am33_root_bus.node, &pci_root_buses); - - am33_root_bus.subordinate = pci_do_scan_bus(0); - - pci_root_bus = &am33_root_bus; -#else - pci_root_bus = pci_scan_bus(0, &pci_direct_ampci, NULL); -#endif - } + pci_root_bus = pci_scan_bus(0, &pci_direct_ampci, NULL); pcibios_irq_init(); pcibios_fixup_irqs(); -#if 0 pcibios_resource_survey(); -#endif return 0; } From 012c79bad50469d964fda126102080d4b93a5946 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 8 Jan 2010 14:43:21 -0800 Subject: [PATCH 0711/1626] mn10300: make the ASB2305's PCnet32 NIC work by using the PCI bridge's SRAM Access to the ASB2305's PCnet32 NIC doesn't work correctly because when the NIC attempts to update the ring buffer flags by DMA, the change to RAM crops up about 17uS after the interrupt line is asserted. This is almost certainly due to a bug in the PCI bridge FPGA on that board. We can get around this by making dma_alloc_coherent() put the ring buffer in the SRAM attached to the PCI bridge rather than in the SDRAM. Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/mm/dma-alloc.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c index f3649d8f50e3..ee82d624b3c6 100644 --- a/arch/mn10300/mm/dma-alloc.c +++ b/arch/mn10300/mm/dma-alloc.c @@ -16,12 +16,24 @@ #include #include +static unsigned long pci_sram_allocated = 0xbc000000; + void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, int gfp) { unsigned long addr; void *ret; + printk("dma_alloc_coherent(%s,%zu,,%x)\n", dev_name(dev), size, gfp); + + if (0xbe000000 - pci_sram_allocated >= size) { + size = (size + 255) & ~255; + addr = pci_sram_allocated; + pci_sram_allocated += size; + ret = (void *) addr; + goto done; + } + /* ignore region specifiers */ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); @@ -41,7 +53,9 @@ void *dma_alloc_coherent(struct device *dev, size_t size, /* write back and evict all cache lines covering this region */ mn10300_dcache_flush_inv_range2(virt_to_phys((void *) addr), PAGE_SIZE); +done: *dma_handle = virt_to_bus((void *) addr); + printk("dma_alloc_coherent() = %p [%x]\n", ret, *dma_handle); return ret; } EXPORT_SYMBOL(dma_alloc_coherent); @@ -51,6 +65,9 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr, { unsigned long addr = (unsigned long) vaddr & ~0x20000000; + if (addr >= 0x9c000000) + return; + free_pages(addr, get_order(size)); } EXPORT_SYMBOL(dma_free_coherent); From 598cace09645fc10f8150e4adc982922cbd214ed Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 8 Jan 2010 14:43:21 -0800 Subject: [PATCH 0712/1626] mn10300: update the ASB2303 defconfig Update the defconfig for the ASB2303 platform. Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/configs/asb2303_defconfig | 107 ++++++++++++++++--------- 1 file changed, 70 insertions(+), 37 deletions(-) diff --git a/arch/mn10300/configs/asb2303_defconfig b/arch/mn10300/configs/asb2303_defconfig index 3acce23708b0..441920d8ff58 100644 --- a/arch/mn10300/configs/asb2303_defconfig +++ b/arch/mn10300/configs/asb2303_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Sat Apr 18 11:13:22 2009 +# Linux kernel version: 2.6.33-rc1 +# Tue Dec 22 19:26:25 2009 # CONFIG_MN10300=y CONFIG_AM33=y @@ -22,6 +22,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HOTPLUG_CPU is not set CONFIG_HZ=1000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -43,11 +44,10 @@ CONFIG_BSD_PROCESS_ACCT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y # CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TINY_RCU=y # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -62,7 +62,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set -CONFIG_STRIP_ASM_SYMS=y # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -75,14 +74,22 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -90,6 +97,35 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # CONFIG_BLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -145,9 +181,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Power management options @@ -202,6 +237,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -216,6 +252,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -341,7 +378,6 @@ CONFIG_MISC_DEVICES=y # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -362,14 +398,11 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -430,11 +463,15 @@ CONFIG_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -451,22 +488,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -490,11 +512,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # # File systems # +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -539,6 +567,7 @@ CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -561,13 +590,13 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_SAMPLES is not set @@ -577,7 +606,11 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set From a29815a333c6c6e677294bbe5958e771d0aad3fd Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 10 Jan 2010 16:28:09 +0200 Subject: [PATCH 0713/1626] core, x86: make LIST_POISON less deadly The list macros use LIST_POISON1 and LIST_POISON2 as undereferencable pointers in order to trap erronous use of freed list_heads. Unfortunately userspace can arrange for those pointers to actually be dereferencable, potentially turning an oops to an expolit. To avoid this allow architectures (currently x86_64 only) to override the default values for these pointers with truly-undereferencable values. This is easy on x86_64 as the virtual address space is large and contains areas that cannot be mapped. Other 64-bit architectures will likely find similar unmapped ranges. [ingo: switch to 0xdead000000000000 as the unmapped area] [ingo: add comments, cleanup] [jaswinder: eliminate sparse warnings] Acked-by: Linus Torvalds Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Ingo Molnar Signed-off-by: Avi Kivity Signed-off-by: Linus Torvalds --- arch/x86/Kconfig | 5 +++++ include/linux/poison.h | 16 ++++++++++++++-- 2 files changed, 19 insertions(+), 2 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6bf1f1ac478c..cbcbfdee3ee0 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1247,6 +1247,11 @@ config ARCH_MEMORY_PROBE def_bool X86_64 depends on MEMORY_HOTPLUG +config ILLEGAL_POINTER_VALUE + hex + default 0 if X86_32 + default 0xdead000000000000 if X86_64 + source "mm/Kconfig" config HIGHPTE diff --git a/include/linux/poison.h b/include/linux/poison.h index 7fc194aef8c2..2110a81c5e2a 100644 --- a/include/linux/poison.h +++ b/include/linux/poison.h @@ -2,13 +2,25 @@ #define _LINUX_POISON_H /********** include/linux/list.h **********/ + +/* + * Architectures might want to move the poison pointer offset + * into some well-recognized area such as 0xdead000000000000, + * that is also not mappable by user-space exploits: + */ +#ifdef CONFIG_ILLEGAL_POINTER_VALUE +# define POISON_POINTER_DELTA _AC(CONFIG_ILLEGAL_POINTER_VALUE, UL) +#else +# define POISON_POINTER_DELTA 0 +#endif + /* * These are non-NULL pointers that will result in page faults * under normal circumstances, used to verify that nobody uses * non-initialized list entries. */ -#define LIST_POISON1 ((void *) 0x00100100) -#define LIST_POISON2 ((void *) 0x00200200) +#define LIST_POISON1 ((void *) 0x00100100 + POISON_POINTER_DELTA) +#define LIST_POISON2 ((void *) 0x00200200 + POISON_POINTER_DELTA) /********** include/linux/timer.h **********/ /* From 39825f4dc9f4e409e8ea43ef4df04a924699ad1f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 9 Jan 2010 11:41:48 +0300 Subject: [PATCH 0714/1626] iwlwifi: silence buffer overflow warning Smatch (and presumably other static checkers) complain that MAX_TID_COUNT is past the end of the array. In the resulting discussion, Zhu Yi pointed out that this value is not used in real life and the assignment was only there to silence a gcc warning. If there were a bug in the surrounding code and the value were used, the WARN_ON(!qc) would print a warning before the crash. Signed-off-by: Dan Carpenter Acked-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 761aab127e7c..9b4b8b5c7574 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -1961,7 +1961,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, struct ieee80211_tx_info *info; struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; u32 status = le32_to_cpu(tx_resp->u.status); - int tid = MAX_TID_COUNT - 1; + int uninitialized_var(tid); int sta_id; int freed; u8 *qc = NULL; From eb70df13ee52dbc0f2c0ffd8ed34a8cd27440baf Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Sun, 10 Jan 2010 22:04:19 +0000 Subject: [PATCH 0715/1626] af_packet: Don't use skb after dev_queue_xmit() tpacket_snd() can change and kfree an skb after dev_queue_xmit(), which is illegal. With debugging by: Stephen Hemminger Reported-by: Michael Breuer With help from: David S. Miller Signed-off-by: Jarek Poplawski Tested-by: Michael Breuer Signed-off-by: David S. Miller --- net/packet/af_packet.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index e0516a22be2e..f126d18dbdc4 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1021,8 +1021,20 @@ static int tpacket_snd(struct packet_sock *po, struct msghdr *msg) status = TP_STATUS_SEND_REQUEST; err = dev_queue_xmit(skb); - if (unlikely(err > 0 && (err = net_xmit_errno(err)) != 0)) - goto out_xmit; + if (unlikely(err > 0)) { + err = net_xmit_errno(err); + if (err && __packet_get_status(po, ph) == + TP_STATUS_AVAILABLE) { + /* skb was destructed already */ + skb = NULL; + goto out_status; + } + /* + * skb was dropped but not destructed yet; + * let's treat it like congestion or err < 0 + */ + err = 0; + } packet_increment_head(&po->tx_ring); len_sum += tp_len; } while (likely((ph != NULL) || @@ -1033,9 +1045,6 @@ static int tpacket_snd(struct packet_sock *po, struct msghdr *msg) err = len_sum; goto out_put; -out_xmit: - skb->destructor = sock_wfree; - atomic_dec(&po->tx_ring.pending); out_status: __packet_set_status(po, ph, status); kfree_skb(skb); From aa4e2e171385bb77b4da8b760d26dea2aa291587 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 11 Jan 2010 15:53:45 -0800 Subject: [PATCH 0716/1626] Documentation/3c509: document ethtool support 3c509 was changed to support ethtool in 2002, making the 'xcvr' module parameter obsolete in most cases. More recently 3c509 was converted to the modern driver model and this parameter was removed. Fix the documentation to refer to ethtool rather than the module parameter. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- Documentation/networking/3c509.txt | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/Documentation/networking/3c509.txt b/Documentation/networking/3c509.txt index 0643e3b7168c..3c45d5dcd63b 100644 --- a/Documentation/networking/3c509.txt +++ b/Documentation/networking/3c509.txt @@ -48,11 +48,11 @@ for LILO parameters for doing this: This configures the first found 3c509 card for IRQ 10, base I/O 0x310, and transceiver type 3 (10base2). The flag "0x3c509" must be set to avoid conflicts with other card types when overriding the I/O address. When the driver is -loaded as a module, only the IRQ and transceiver setting may be overridden. -For example, setting two cards to 10base2/IRQ10 and AUI/IRQ11 is done by using -the xcvr and irq module options: +loaded as a module, only the IRQ may be overridden. For example, +setting two cards to IRQ10 and IRQ11 is done by using the irq module +option: - options 3c509 xcvr=3,1 irq=10,11 + options 3c509 irq=10,11 (2) Full-duplex mode @@ -77,6 +77,8 @@ operation. itself full-duplex capable. This is almost certainly one of two things: a full- duplex-capable Ethernet switch (*not* a hub), or a full-duplex-capable NIC on another system that's connected directly to the 3c509B via a crossover cable. + +Full-duplex mode can be enabled using 'ethtool'. /////Extremely important caution concerning full-duplex mode///// Understand that the 3c509B's hardware's full-duplex support is much more @@ -113,6 +115,8 @@ This insured that merely upgrading the driver from an earlier version would never automatically enable full-duplex mode in an existing installation; it must always be explicitly enabled via one of these code in order to be activated. + +The transceiver type can be changed using 'ethtool'. (4a) Interpretation of error messages and common problems From 193e70ef65a6c33f2935ce1f4adeb08ecb9202cf Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 11 Jan 2010 06:47:00 +0100 Subject: [PATCH 0717/1626] mac80211: fix queue selection for data frames on monitor interfaces When ieee80211_monitor_select_queue encounters data frames, it selects the WMM AC based on skb->priority and assumes that skb->priority contains a valid 802.1d tag. However this assumption is incorrect, since ieee80211_select_queue has not been called at this point. If skb->priority > 7, an array overrun occurs, which could lead to invalid values, resulting in crashes in the tx path. Fix this by setting skb->priority based on the 802.11 header for QoS frames and using the default AC for all non-QoS frames. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- net/mac80211/iface.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index d62ec0803bec..32abae3ce32a 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -670,6 +670,7 @@ static u16 ieee80211_monitor_select_queue(struct net_device *dev, struct ieee80211_local *local = sdata->local; struct ieee80211_hdr *hdr; struct ieee80211_radiotap_header *rtap = (void *)skb->data; + u8 *p; if (local->hw.queues < 4) return 0; @@ -680,12 +681,14 @@ static u16 ieee80211_monitor_select_queue(struct net_device *dev, hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len)); - if (!ieee80211_is_data(hdr->frame_control)) { + if (!ieee80211_is_data_qos(hdr->frame_control)) { skb->priority = 7; return ieee802_1d_to_ac[skb->priority]; } - skb->priority = 0; + p = ieee80211_get_qos_ctl(hdr); + skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK; + return ieee80211_downgrade_queue(local, skb); } From 8c5d9808e95739c9001b852464fd58fd0f583280 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 11 Jan 2010 16:14:57 +0100 Subject: [PATCH 0718/1626] cfg80211: fix refcount imbalance when wext is disabled When CONFIG_CFG80211_WEXT is not set, there is a refcount imbalance with rdev->opencount, fix that by moving it out of the ifdef. Reported-by: Alan Stern Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/wireless/core.c b/net/wireless/core.c index c2a2c563d21a..92b812442488 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -745,9 +745,9 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb, mutex_unlock(&rdev->devlist_mtx); dev_put(dev); } -#ifdef CONFIG_CFG80211_WEXT cfg80211_lock_rdev(rdev); mutex_lock(&rdev->devlist_mtx); +#ifdef CONFIG_CFG80211_WEXT wdev_lock(wdev); switch (wdev->iftype) { case NL80211_IFTYPE_ADHOC: @@ -760,10 +760,10 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb, break; } wdev_unlock(wdev); +#endif rdev->opencount++; mutex_unlock(&rdev->devlist_mtx); cfg80211_unlock_rdev(rdev); -#endif break; case NETDEV_UNREGISTER: /* From 066000dd856709b6980123eb39b957fe26993f7b Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Mon, 11 Jan 2010 15:51:04 -0800 Subject: [PATCH 0719/1626] Revert "x86, apic: Use logical flat on intel with <= 8 logical cpus" Revert commit 2fbd07a5f5d1295fa9b0c0564ec27da7c276a75a, as this commit breaks an IBM platform with quad-core Xeon cpu's. According to Suresh, this might be an IBM platform issue, as on other Intel platforms with <= 8 logical cpu's, logical flat mode works fine irespective of physical apic id values (inline with the xapic architecture). Revert this for now because of the IBM platform breakage. Another version will be re-submitted after the complete analysis. Signed-off-by: Ananth N Mavinakayanahalli Acked-by: Suresh Siddha Signed-off-by: Linus Torvalds --- arch/x86/kernel/apic/apic.c | 26 ++++++++++++++++++-------- arch/x86/kernel/apic/probe_64.c | 15 ++++----------- 2 files changed, 22 insertions(+), 19 deletions(-) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index aa57c079c98f..e80f291472a4 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -62,7 +62,7 @@ unsigned int boot_cpu_physical_apicid = -1U; /* * The highest APIC ID seen during enumeration. * - * On AMD, this determines the messaging protocol we can use: if all APIC IDs + * This determines the messaging protocol we can use: if all APIC IDs * are in the 0 ... 7 range, then we can use logical addressing which * has some performance advantages (better broadcasting). * @@ -1898,14 +1898,24 @@ void __cpuinit generic_processor_info(int apicid, int version) max_physical_apicid = apicid; #ifdef CONFIG_X86_32 - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_INTEL: - if (num_processors > 8) - def_to_bigsmp = 1; - break; - case X86_VENDOR_AMD: - if (max_physical_apicid >= 8) + /* + * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y + * but we need to work other dependencies like SMP_SUSPEND etc + * before this can be done without some confusion. + * if (CPU_HOTPLUG_ENABLED || num_processors > 8) + * - Ashok Raj + */ + if (max_physical_apicid >= 8) { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + if (!APIC_XAPIC(version)) { + def_to_bigsmp = 0; + break; + } + /* If P4 and above fall through */ + case X86_VENDOR_AMD: def_to_bigsmp = 1; + } } #endif diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c index c4cbd3080c1c..65edc180fc82 100644 --- a/arch/x86/kernel/apic/probe_64.c +++ b/arch/x86/kernel/apic/probe_64.c @@ -64,23 +64,16 @@ void __init default_setup_apic_routing(void) apic = &apic_x2apic_phys; else apic = &apic_x2apic_cluster; + printk(KERN_INFO "Setting APIC routing to %s\n", apic->name); } #endif if (apic == &apic_flat) { - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_INTEL: - if (num_processors > 8) - apic = &apic_physflat; - break; - case X86_VENDOR_AMD: - if (max_physical_apicid >= 8) - apic = &apic_physflat; - } + if (max_physical_apicid >= 8) + apic = &apic_physflat; + printk(KERN_INFO "Setting APIC routing to %s\n", apic->name); } - printk(KERN_INFO "Setting APIC routing to %s\n", apic->name); - if (is_vsmp_box()) { /* need to update phys_pkg_id */ apic->phys_pkg_id = apicid_phys_pkg_id; From b82a4045f7962483a78a874343dc6e31b79c96c1 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Mon, 11 Jan 2010 11:31:44 +0100 Subject: [PATCH 0720/1626] tracing/x86: Derive arch from bits argument in recordmcount.pl Let the arch argument be overruled by bits. Otherwise, building of external modules against a i386 target on a x86-64 host (and likely vice versa as well) fails unless ARCH=i386 is explicitly passed to make. Signed-off-by: Jan Kiszka LKML-Reference: <4B4AFE10.8050109@siemens.com> Signed-off-by: Steven Rostedt --- scripts/recordmcount.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index 92f09fe9639e..ea6f6e3adaea 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -194,7 +194,7 @@ sub check_objcopy } } -if ($arch eq "x86") { +if ($arch =~ /(x86(_64)?)|(i386)/) { if ($bits == 64) { $arch = "x86_64"; } else { From b10d96cb9c9a2a0029d28910ca517f4003051b04 Mon Sep 17 00:00:00 2001 From: Johannes Thoma Date: Thu, 7 Jan 2010 16:02:50 +0100 Subject: [PATCH 0721/1626] drbd: Don't go into StandAlone mode when authentification failes because of network error Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_receiver.c | 31 +++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index dbd451984e0d..e3716fadc6a5 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -878,9 +878,13 @@ retry: if (mdev->cram_hmac_tfm) { /* drbd_request_state(mdev, NS(conn, WFAuth)); */ - if (!drbd_do_auth(mdev)) { + switch (drbd_do_auth(mdev)) { + case -1: dev_err(DEV, "Authentication of peer failed\n"); return -1; + case 0: + dev_err(DEV, "Authentication of peer failed, trying again.\n"); + return 0; } } @@ -3831,10 +3835,17 @@ static int drbd_do_auth(struct drbd_conf *mdev) { dev_err(DEV, "This kernel was build without CONFIG_CRYPTO_HMAC.\n"); dev_err(DEV, "You need to disable 'cram-hmac-alg' in drbd.conf.\n"); - return 0; + return -1; } #else #define CHALLENGE_LEN 64 + +/* Return value: + 1 - auth succeeded, + 0 - failed, try again (network error), + -1 - auth failed, don't try again. +*/ + static int drbd_do_auth(struct drbd_conf *mdev) { char my_challenge[CHALLENGE_LEN]; /* 64 Bytes... */ @@ -3855,7 +3866,7 @@ static int drbd_do_auth(struct drbd_conf *mdev) (u8 *)mdev->net_conf->shared_secret, key_len); if (rv) { dev_err(DEV, "crypto_hash_setkey() failed with %d\n", rv); - rv = 0; + rv = -1; goto fail; } @@ -3878,14 +3889,14 @@ static int drbd_do_auth(struct drbd_conf *mdev) if (p.length > CHALLENGE_LEN*2) { dev_err(DEV, "expected AuthChallenge payload too big.\n"); - rv = 0; + rv = -1; goto fail; } peers_ch = kmalloc(p.length, GFP_NOIO); if (peers_ch == NULL) { dev_err(DEV, "kmalloc of peers_ch failed\n"); - rv = 0; + rv = -1; goto fail; } @@ -3901,7 +3912,7 @@ static int drbd_do_auth(struct drbd_conf *mdev) response = kmalloc(resp_size, GFP_NOIO); if (response == NULL) { dev_err(DEV, "kmalloc of response failed\n"); - rv = 0; + rv = -1; goto fail; } @@ -3911,7 +3922,7 @@ static int drbd_do_auth(struct drbd_conf *mdev) rv = crypto_hash_digest(&desc, &sg, sg.length, response); if (rv) { dev_err(DEV, "crypto_hash_digest() failed with %d\n", rv); - rv = 0; + rv = -1; goto fail; } @@ -3947,7 +3958,7 @@ static int drbd_do_auth(struct drbd_conf *mdev) right_response = kmalloc(resp_size, GFP_NOIO); if (right_response == NULL) { dev_err(DEV, "kmalloc of right_response failed\n"); - rv = 0; + rv = -1; goto fail; } @@ -3956,7 +3967,7 @@ static int drbd_do_auth(struct drbd_conf *mdev) rv = crypto_hash_digest(&desc, &sg, sg.length, right_response); if (rv) { dev_err(DEV, "crypto_hash_digest() failed with %d\n", rv); - rv = 0; + rv = -1; goto fail; } @@ -3965,6 +3976,8 @@ static int drbd_do_auth(struct drbd_conf *mdev) if (rv) dev_info(DEV, "Peer authenticated using %d bytes of '%s' HMAC\n", resp_size, mdev->net_conf->cram_hmac_alg); + else + rv = -1; fail: kfree(peers_ch); From a393db6f10ef2d4f28257234cfc730e744dfb6a4 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Tue, 22 Dec 2009 13:35:52 +0100 Subject: [PATCH 0722/1626] drbd: Allow online resizing of DRBD devices while peer not reachable (needs to be explicitly forced) Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_int.h | 5 ++--- drivers/block/drbd/drbd_nl.c | 17 +++++++++++------ drivers/block/drbd/drbd_receiver.c | 4 ++-- include/linux/drbd_nl.h | 1 + 4 files changed, 16 insertions(+), 11 deletions(-) diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 79d8e22c4d0d..2bf3a6ef3684 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -1371,10 +1371,9 @@ extern int is_valid_ar_handle(struct drbd_request *, sector_t); extern void drbd_suspend_io(struct drbd_conf *mdev); extern void drbd_resume_io(struct drbd_conf *mdev); extern char *ppsize(char *buf, unsigned long long size); -extern sector_t drbd_new_dev_size(struct drbd_conf *, - struct drbd_backing_dev *); +extern sector_t drbd_new_dev_size(struct drbd_conf *, struct drbd_backing_dev *, int); enum determine_dev_size { dev_size_error = -1, unchanged = 0, shrunk = 1, grew = 2 }; -extern enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *) __must_hold(local); +extern enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *, int force) __must_hold(local); extern void resync_after_online_grow(struct drbd_conf *); extern void drbd_setup_queue_param(struct drbd_conf *mdev, unsigned int) __must_hold(local); extern int drbd_set_role(struct drbd_conf *mdev, enum drbd_role new_role, diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c index 3313901a4861..1292e0620663 100644 --- a/drivers/block/drbd/drbd_nl.c +++ b/drivers/block/drbd/drbd_nl.c @@ -510,7 +510,7 @@ void drbd_resume_io(struct drbd_conf *mdev) * Returns 0 on success, negative return values indicate errors. * You should call drbd_md_sync() after calling this function. */ -enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *mdev) __must_hold(local) +enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *mdev, int force) __must_hold(local) { sector_t prev_first_sect, prev_size; /* previous meta location */ sector_t la_size; @@ -541,7 +541,7 @@ enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *mdev) __must_ho /* TODO: should only be some assert here, not (re)init... */ drbd_md_set_sector_offsets(mdev, mdev->ldev); - size = drbd_new_dev_size(mdev, mdev->ldev); + size = drbd_new_dev_size(mdev, mdev->ldev, force); if (drbd_get_capacity(mdev->this_bdev) != size || drbd_bm_capacity(mdev) != size) { @@ -596,7 +596,7 @@ out: } sector_t -drbd_new_dev_size(struct drbd_conf *mdev, struct drbd_backing_dev *bdev) +drbd_new_dev_size(struct drbd_conf *mdev, struct drbd_backing_dev *bdev, int assume_peer_has_space) { sector_t p_size = mdev->p_size; /* partner's disk size. */ sector_t la_size = bdev->md.la_size_sect; /* last agreed size. */ @@ -606,6 +606,11 @@ drbd_new_dev_size(struct drbd_conf *mdev, struct drbd_backing_dev *bdev) m_size = drbd_get_max_capacity(bdev); + if (mdev->state.conn < C_CONNECTED && assume_peer_has_space) { + dev_warn(DEV, "Resize while not connected was forced by the user!\n"); + p_size = m_size; + } + if (p_size && m_size) { size = min_t(sector_t, p_size, m_size); } else { @@ -965,7 +970,7 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp /* Prevent shrinking of consistent devices ! */ if (drbd_md_test_flag(nbc, MDF_CONSISTENT) && - drbd_new_dev_size(mdev, nbc) < nbc->md.la_size_sect) { + drbd_new_dev_size(mdev, nbc, 0) < nbc->md.la_size_sect) { dev_warn(DEV, "refusing to truncate a consistent device\n"); retcode = ERR_DISK_TO_SMALL; goto force_diskless_dec; @@ -1052,7 +1057,7 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp !drbd_md_test_flag(mdev->ldev, MDF_CONNECTED_IND)) set_bit(USE_DEGR_WFC_T, &mdev->flags); - dd = drbd_determin_dev_size(mdev); + dd = drbd_determin_dev_size(mdev, 0); if (dd == dev_size_error) { retcode = ERR_NOMEM_BITMAP; goto force_diskless_dec; @@ -1504,7 +1509,7 @@ static int drbd_nl_resize(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp, } mdev->ldev->dc.disk_size = (sector_t)rs.resize_size; - dd = drbd_determin_dev_size(mdev); + dd = drbd_determin_dev_size(mdev, rs.resize_force); drbd_md_sync(mdev); put_ldev(mdev); if (dd == dev_size_error) { diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index e3716fadc6a5..f22a5283128a 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -2870,7 +2870,7 @@ static int receive_sizes(struct drbd_conf *mdev, struct p_header *h) /* Never shrink a device with usable data during connect. But allow online shrinking if we are connected. */ - if (drbd_new_dev_size(mdev, mdev->ldev) < + if (drbd_new_dev_size(mdev, mdev->ldev, 0) < drbd_get_capacity(mdev->this_bdev) && mdev->state.disk >= D_OUTDATED && mdev->state.conn < C_CONNECTED) { @@ -2885,7 +2885,7 @@ static int receive_sizes(struct drbd_conf *mdev, struct p_header *h) #undef min_not_zero if (get_ldev(mdev)) { - dd = drbd_determin_dev_size(mdev); + dd = drbd_determin_dev_size(mdev, 0); put_ldev(mdev); if (dd == dev_size_error) return FALSE; diff --git a/include/linux/drbd_nl.h b/include/linux/drbd_nl.h index db5721ad50d1..a4d82f895994 100644 --- a/include/linux/drbd_nl.h +++ b/include/linux/drbd_nl.h @@ -69,6 +69,7 @@ NL_PACKET(disconnect, 6, ) NL_PACKET(resize, 7, NL_INT64( 29, T_MAY_IGNORE, resize_size) + NL_BIT( 68, T_MAY_IGNORE, resize_force) ) NL_PACKET(syncer_conf, 8, From 2ebccd71a71e6078920bc65b40f120e72b71c2b6 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Tue, 12 Jan 2010 10:09:07 +0100 Subject: [PATCH 0723/1626] drbd: The kernel code is now equivalent to out of tree release 8.3.7 Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- include/linux/drbd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/drbd.h b/include/linux/drbd.h index e84f4733cb55..78962272338a 100644 --- a/include/linux/drbd.h +++ b/include/linux/drbd.h @@ -53,7 +53,7 @@ extern const char *drbd_buildtag(void); -#define REL_VERSION "8.3.6" +#define REL_VERSION "8.3.7" #define API_VERSION 88 #define PRO_VERSION_MIN 86 #define PRO_VERSION_MAX 91 From 0f585f14d4e34ab701283e9237ac7695cd7c9e31 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 12 Jan 2010 03:36:57 +0900 Subject: [PATCH 0724/1626] GFS2: Fix refcnt leak on gfs2_follow_link() error path If ->follow_link handler return the error, it should decrement nd->path refcnt. This patch fix it. Signed-off-by: OGAWA Hirofumi Signed-off-by: Steven Whitehouse --- fs/gfs2/ops_inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c index 78f73ca1ef3e..84350e1be66d 100644 --- a/fs/gfs2/ops_inode.c +++ b/fs/gfs2/ops_inode.c @@ -1088,7 +1088,8 @@ static void *gfs2_follow_link(struct dentry *dentry, struct nameidata *nd) error = vfs_follow_link(nd, buf); if (buf != array) kfree(buf); - } + } else + path_put(&nd->path); return ERR_PTR(error); } From 7b4e08a77f0cbfe31b47faf082caa02f9c252266 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 11 Jan 2010 16:33:18 +0000 Subject: [PATCH 0725/1626] MXC: Add AUDMUXv2 register decode to debugfs Since AUDMUX configuration appears to be one of the common stumbling blocks for people setting up i.MX audio try to provide some diagnostic information describing the current setup to assisist people in working out what's going on. Signed-off-by: Mark Brown Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/audmux-v2.c | 137 ++++++++++++++++++++++++++++++++++ 1 file changed, 137 insertions(+) diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index 6f21096086fd..b06954a84436 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -32,6 +33,140 @@ static void __iomem *audmux_base; #define MXC_AUDMUX_V2_PTCR(x) ((x) * 8) #define MXC_AUDMUX_V2_PDCR(x) ((x) * 8 + 4) +#ifdef CONFIG_DEBUG_FS +static struct dentry *audmux_debugfs_root; + +static int audmux_open_file(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +/* There is an annoying discontinuity in the SSI numbering with regard + * to the Linux number of the devices */ +static const char *audmux_port_string(int port) +{ + switch (port) { + case MX31_AUDMUX_PORT1_SSI0: + return "imx-ssi.0"; + case MX31_AUDMUX_PORT2_SSI1: + return "imx-ssi.1"; + case MX31_AUDMUX_PORT3_SSI_PINS_3: + return "SSI3"; + case MX31_AUDMUX_PORT4_SSI_PINS_4: + return "SSI4"; + case MX31_AUDMUX_PORT5_SSI_PINS_5: + return "SSI5"; + case MX31_AUDMUX_PORT6_SSI_PINS_6: + return "SSI6"; + default: + return "UNKNOWN"; + } +} + +static ssize_t audmux_read_file(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + ssize_t ret; + char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + int port = (int)file->private_data; + u32 pdcr, ptcr; + + if (!buf) + return -ENOMEM; + + if (audmux_clk) + clk_enable(audmux_clk); + + ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port)); + pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port)); + + if (audmux_clk) + clk_disable(audmux_clk); + + ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n", + pdcr, ptcr); + + if (ptcr & MXC_AUDMUX_V2_PTCR_TFSDIR) + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "TxFS output from %s, ", + audmux_port_string((ptcr >> 27) & 0x7)); + else + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "TxFS input, "); + + if (ptcr & MXC_AUDMUX_V2_PTCR_TCLKDIR) + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "TxClk output from %s", + audmux_port_string((ptcr >> 22) & 0x7)); + else + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "TxClk input"); + + ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n"); + + if (ptcr & MXC_AUDMUX_V2_PTCR_SYN) { + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "Port is symmetric"); + } else { + if (ptcr & MXC_AUDMUX_V2_PTCR_RFSDIR) + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "RxFS output from %s, ", + audmux_port_string((ptcr >> 17) & 0x7)); + else + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "RxFS input, "); + + if (ptcr & MXC_AUDMUX_V2_PTCR_RCLKDIR) + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "RxClk output from %s", + audmux_port_string((ptcr >> 12) & 0x7)); + else + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "RxClk input"); + } + + ret += snprintf(buf + ret, PAGE_SIZE - ret, + "\nData received from %s\n", + audmux_port_string((pdcr >> 13) & 0x7)); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); + + kfree(buf); + + return ret; +} + +static const struct file_operations audmux_debugfs_fops = { + .open = audmux_open_file, + .read = audmux_read_file, +}; + +static void audmux_debugfs_init(void) +{ + int i; + char buf[20]; + + audmux_debugfs_root = debugfs_create_dir("audmux", NULL); + if (!audmux_debugfs_root) { + pr_warning("Failed to create AUDMUX debugfs root\n"); + return; + } + + for (i = 1; i < 8; i++) { + snprintf(buf, sizeof(buf), "ssi%d", i); + if (!debugfs_create_file(buf, 0444, audmux_debugfs_root, + (void *)i, &audmux_debugfs_fops)) + pr_warning("Failed to create AUDMUX port %d debugfs file\n", + i); + } +} +#else +static inline void audmux_debugfs_init(void) +{ +} +#endif + int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr, unsigned int pdcr) { @@ -68,6 +203,8 @@ static int mxc_audmux_v2_init(void) if (cpu_is_mx31() || cpu_is_mx35()) audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR); + audmux_debugfs_init(); + return 0; } From 2d9c5597ad1408885fdef5838aa27a8a0ee9e915 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 8 Jan 2010 11:56:41 +0200 Subject: [PATCH 0726/1626] OMAP: DSS2: Reject scaling settings when they cannot be supported MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the scaling ratio is below 0.5 video output width can't be identical to the display width. Reject such settings. Signed-off-by: Ville Syrjälä Acked-by: Tomi Valkeinen --- drivers/video/omap2/dss/dispc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index e2e0f9ae7353..de8bfbac9e26 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -1454,7 +1454,10 @@ static unsigned long calc_fclk_five_taps(u16 width, u16 height, do_div(tmp, 2 * out_height * ppl); fclk = tmp; - if (height > 2 * out_height && ppl != out_width) { + if (height > 2 * out_height) { + if (ppl == out_width) + return 0; + tmp = pclk * (height - 2 * out_height) * out_width; do_div(tmp, 2 * out_height * (ppl - out_width)); fclk = max(fclk, (u32) tmp); @@ -1634,7 +1637,7 @@ static int _dispc_setup_plane(enum omap_plane plane, DSSDBG("required fclk rate = %lu Hz\n", fclk); DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate()); - if (fclk > dispc_fclk_rate()) { + if (!fclk || fclk > dispc_fclk_rate()) { DSSERR("failed to set up scaling, " "required fclk rate = %lu Hz, " "current fclk rate = %lu Hz\n", From 807a7515aea421f2b340140482ed4c8811c523c6 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 7 Jan 2010 17:45:03 +0200 Subject: [PATCH 0727/1626] OMAP: DSS2: OMAPFB: fix crash when panel driver was not loaded If the panel's probe had failed, omapfb would still go on, eventually crashing. A better fix would be to handle each display properly, and leaving just the failed display out. But that is a bigger change. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/omapfb/omapfb-main.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c index e61a75c31358..d17caef6915a 100644 --- a/drivers/video/omap2/omapfb/omapfb-main.c +++ b/drivers/video/omap2/omapfb/omapfb-main.c @@ -2115,6 +2115,11 @@ static int omapfb_probe(struct platform_device *pdev) dssdev = NULL; for_each_dss_dev(dssdev) { omap_dss_get_device(dssdev); + if (!dssdev->driver) { + dev_err(&pdev->dev, "no driver for display\n"); + r = -EINVAL; + goto cleanup; + } fbdev->displays[fbdev->num_displays++] = dssdev; } From 6fcd585f15ffee6acbe6f502091e5e994283ce44 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 11 Jan 2010 23:43:26 -0800 Subject: [PATCH 0728/1626] sparc32: Update defconfig. Signed-off-by: David S. Miller --- arch/sparc/configs/sparc32_defconfig | 87 ++++++++++++++++++++++------ 1 file changed, 69 insertions(+), 18 deletions(-) diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig index 983d59824a28..99a1f191497b 100644 --- a/arch/sparc/configs/sparc32_defconfig +++ b/arch/sparc/configs/sparc32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Wed Sep 16 00:03:43 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 11 23:20:31 2010 # # CONFIG_64BIT is not set CONFIG_SPARC=y @@ -41,6 +41,7 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -88,21 +89,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y @@ -131,14 +132,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -168,8 +196,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_SUN_PM=y # CONFIG_SPARC_LED is not set @@ -257,6 +284,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -295,9 +323,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -335,6 +360,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y @@ -398,8 +427,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -434,7 +466,9 @@ CONFIG_SCSI_QLOGICPTI=m # CONFIG_SCSI_DEBUG is not set CONFIG_SCSI_SUNESP=y # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -450,7 +484,7 @@ CONFIG_SCSI_SUNESP=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -487,6 +521,7 @@ CONFIG_SUNQE=m # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -546,6 +581,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -555,6 +591,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -574,6 +611,7 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=m # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_SUNKBD=m # CONFIG_KEYBOARD_XTKBD is not set @@ -604,6 +642,7 @@ CONFIG_SERIO_SERPORT=m # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -636,6 +675,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_CONSOLE_POLL=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -661,6 +701,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set @@ -675,9 +720,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -699,6 +742,7 @@ CONFIG_SSB_POSSIBLE=y # # Graphics support # +CONFIG_VGA_ARB=y # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set @@ -776,7 +820,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set CONFIG_RTC_DRV_M48T59=y +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -955,6 +1001,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1003,9 +1050,9 @@ CONFIG_KGDB=y CONFIG_KGDB_SERIAL_CONSOLE=y CONFIG_KGDB_TESTS=y # CONFIG_KGDB_TESTS_ON_BOOT is not set -# CONFIG_KMEMCHECK is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_STACK_DEBUG is not set +# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set # # Security options @@ -1013,7 +1060,11 @@ CONFIG_KGDB_TESTS=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # From af2e7cc27016eadcf3840325aaef59afece3b8f2 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Tue, 29 Dec 2009 22:58:39 +0000 Subject: [PATCH 0729/1626] sparc: Simplify param.h by simply including Signed-off-by: Robert P. J. Day Reviewed-by: Sam Ravnborg Signed-off-by: David S. Miller --- arch/sparc/include/asm/param.h | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-) diff --git a/arch/sparc/include/asm/param.h b/arch/sparc/include/asm/param.h index 9836d9a3cb9a..0bc356bf8c50 100644 --- a/arch/sparc/include/asm/param.h +++ b/arch/sparc/include/asm/param.h @@ -1,22 +1,7 @@ #ifndef _ASMSPARC_PARAM_H #define _ASMSPARC_PARAM_H -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) -#endif - -#ifndef HZ -#define HZ 100 -#endif - #define EXEC_PAGESIZE 8192 /* Thanks for sun4's we carry baggage... */ +#include -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif +#endif /* _ASMSPARC_PARAM_H */ From 9db2f1bec36805e57a003f7bb90e003815d96de8 Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Mon, 4 Jan 2010 08:48:41 +0000 Subject: [PATCH 0730/1626] sky2: Fix oops in sky2_xmit_frame() after TX timeout During TX timeout procedure dev could be awoken too early, e.g. by sky2_complete_tx() called from sky2_down(). Then sky2_xmit_frame() can run while buffers are freed causing an oops. This patch fixes it by adding netif_device_present() test in sky2_tx_complete(). Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=14925 With debugging by: Mike McCormack Reported-by: Berck E. Nash Tested-by: Berck E. Nash Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- drivers/net/sky2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 1c01b96c9611..7650f739a81a 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1844,7 +1844,8 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) sky2->tx_cons = idx; smp_mb(); - if (tx_avail(sky2) > MAX_SKB_TX_LE + 4) + /* Wake unless it's detached, and called e.g. from sky2_down() */ + if (tx_avail(sky2) > MAX_SKB_TX_LE + 4 && netif_device_present(dev)) netif_wake_queue(dev); } From ff998793288b49a3b22d929bf8e56362320905ff Mon Sep 17 00:00:00 2001 From: Peter Horton Date: Tue, 5 Jan 2010 11:14:36 +0000 Subject: [PATCH 0731/1626] UBI: initialise update marker The in kernel copy of a volume's update marker is not initialised from the volume table. This means that volumes where an update was unfinnished will not be treated as "forbidden to use". This is basically that the update functionality was broken. Signed-off-by: Peter Horton Signed-off-by: Artem Bityutskiy Cc: stable@kernel.org --- drivers/mtd/ubi/vtbl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c index 1afc61e7455d..40044028d682 100644 --- a/drivers/mtd/ubi/vtbl.c +++ b/drivers/mtd/ubi/vtbl.c @@ -566,6 +566,7 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si, vol->reserved_pebs = be32_to_cpu(vtbl[i].reserved_pebs); vol->alignment = be32_to_cpu(vtbl[i].alignment); vol->data_pad = be32_to_cpu(vtbl[i].data_pad); + vol->upd_marker = vtbl[i].upd_marker; vol->vol_type = vtbl[i].vol_type == UBI_VID_DYNAMIC ? UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME; vol->name_len = be16_to_cpu(vtbl[i].name_len); From b531b55a7bde8aa2bdf7023b3afc6df1bf3dcb67 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 5 Jan 2010 17:25:59 +0200 Subject: [PATCH 0732/1626] UBI: add more checks to chdev open When opening UBI volumes by their character device names, make sure we are opening character devices, not block devices or any other inode type. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/kapi.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c index 277786ebaa2c..1361574e2b00 100644 --- a/drivers/mtd/ubi/kapi.c +++ b/drivers/mtd/ubi/kapi.c @@ -291,8 +291,7 @@ EXPORT_SYMBOL_GPL(ubi_open_volume_nm); */ struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode) { - int error, ubi_num, vol_id; - struct ubi_volume_desc *ret; + int error, ubi_num, vol_id, mod; struct inode *inode; struct path path; @@ -306,16 +305,16 @@ struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode) return ERR_PTR(error); inode = path.dentry->d_inode; + mod = inode->i_mode; ubi_num = ubi_major2num(imajor(inode)); vol_id = iminor(inode) - 1; - - if (vol_id >= 0 && ubi_num >= 0) - ret = ubi_open_volume(ubi_num, vol_id, mode); - else - ret = ERR_PTR(-ENODEV); - path_put(&path); - return ret; + + if (!S_ISCHR(mod)) + return ERR_PTR(-EINVAL); + if (vol_id >= 0 && ubi_num >= 0) + return ubi_open_volume(ubi_num, vol_id, mode); + return ERR_PTR(-ENODEV); } EXPORT_SYMBOL_GPL(ubi_open_volume_path); From 9c0afc861a7228f718cb6a79fa7f9d46bf9ff300 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 12 Jan 2010 14:00:11 +0100 Subject: [PATCH 0733/1626] ALSA: hda - Fix ALC861-VD capture source mixer The capture source or input source mixer element wasn't created properly for ALC861-VD codec due to the wrong NID passed to alc_auto_create_input_ctls(). References: Novell bnc#568305 http://bugzilla.novell.com/show_bug.cgi?id=568305 Signed-off-by: Takashi Iwai Cc: --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c7465053d6bb..e3caa78ccd54 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -15493,7 +15493,7 @@ static struct alc_config_preset alc861vd_presets[] = { static int alc861vd_auto_create_input_ctls(struct hda_codec *codec, const struct auto_pin_cfg *cfg) { - return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x09, 0); + return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x22, 0); } From abbdc3d88aa2d5c937b21044c336bcd056c1732f Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 3 Dec 2009 17:43:54 -0800 Subject: [PATCH 0734/1626] MIPS: Cleanup forgotten label_module_alloc in tlbex.c commit c8af165342e83a4eb078c9607d29a7c399d30a53 (lmo) rsp. e0cc87f59490d7d62a8ab2a76498dc8a2b64927a (kernel.org) left label_module_alloc unused. Remove it now. Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/752/ Signed-off-by: Ralf Baechle --- arch/mips/mm/tlbex.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 3d0baa4a842d..badcf5e8d695 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -73,9 +73,6 @@ static int __cpuinit m4kc_tlbp_war(void) enum label_id { label_second_part = 1, label_leave, -#ifdef MODULE_START - label_module_alloc, -#endif label_vmalloc, label_vmalloc_done, label_tlbw_hazard, @@ -92,9 +89,6 @@ enum label_id { UASM_L_LA(_second_part) UASM_L_LA(_leave) -#ifdef MODULE_START -UASM_L_LA(_module_alloc) -#endif UASM_L_LA(_vmalloc) UASM_L_LA(_vmalloc_done) UASM_L_LA(_tlbw_hazard) @@ -818,8 +812,6 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) } else { #if defined(CONFIG_HUGETLB_PAGE) const enum label_id ls = label_tlb_huge_update; -#elif defined(MODULE_START) - const enum label_id ls = label_module_alloc; #else const enum label_id ls = label_vmalloc; #endif From d4d9a553d7b96e18fcfbd0b8fb5f803b3a27e4e6 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Thu, 10 Dec 2009 22:55:13 +0800 Subject: [PATCH 0735/1626] MIPS: Cleanup and Fixup of compressed kernel support o Remove the .initrd section. The initrd section was already handled when vmlinux was linked. o Discard .MIPS.options, .options, .pdr, .reginfo, .comment and .note sections. If .MIPS.options is not removed, kernels compiled with gcc 3.4.6 will not boot. o Clean up the file format. o Remove several other unneeded sections. Tested with GCC 3.4.6 and 4.4.1 with and without initrd. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/785/ Signed-off-by: Ralf Baechle --- arch/mips/boot/compressed/Makefile | 9 +- arch/mips/boot/compressed/decompress.c | 10 -- arch/mips/boot/compressed/ld.script | 195 +++++++------------------ 3 files changed, 59 insertions(+), 155 deletions(-) diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index e27f40bbd4e5..671d3448fad4 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -56,7 +56,7 @@ $(obj)/piggy.o: $(obj)/vmlinux.$(suffix_y) $(obj)/dummy.o LDFLAGS_vmlinuz := $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T vmlinuz: $(src)/ld.script $(obj-y) $(obj)/piggy.o $(call if_changed,ld) - $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap $@ + $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) $@ # # Some DECstations need all possible sections of an ECOFF executable @@ -84,14 +84,11 @@ vmlinuz.ecoff: $(obj)/../elf2ecoff $(VMLINUZ) $(obj)/../elf2ecoff: $(src)/../elf2ecoff.c $(Q)$(HOSTCC) -o $@ $^ -drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options -strip-flags = $(addprefix --remove-section=,$(drop-sections)) - -OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary $(strip-flags) +OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary vmlinuz.bin: vmlinuz $(call if_changed,objcopy) -OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec $(strip-flags) +OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec vmlinuz.srec: vmlinuz $(call if_changed,objcopy) diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c index 67330c2f7318..e48fd72898a8 100644 --- a/arch/mips/boot/compressed/decompress.c +++ b/arch/mips/boot/compressed/decompress.c @@ -28,8 +28,6 @@ char *zimage_start; /* The linker tells us where the image is. */ extern unsigned char __image_begin, __image_end; -extern unsigned char __ramdisk_begin, __ramdisk_end; -unsigned long initrd_size; /* debug interfaces */ extern void puts(const char *s); @@ -102,14 +100,6 @@ void decompress_kernel(unsigned long boot_heap_start) puthex((unsigned long)(zimage_size + zimage_start)); puts("\n"); - if (initrd_size) { - puts("initrd at: "); - puthex((unsigned long)(&__ramdisk_begin)); - puts(" "); - puthex((unsigned long)(&__ramdisk_end)); - puts("\n"); - } - /* this area are prepared for mallocing when decompressing */ free_mem_ptr = boot_heap_start; free_mem_end_ptr = boot_heap_start + BOOT_HEAP_SIZE; diff --git a/arch/mips/boot/compressed/ld.script b/arch/mips/boot/compressed/ld.script index 29e9f4c0d5d8..613a35b02f50 100644 --- a/arch/mips/boot/compressed/ld.script +++ b/arch/mips/boot/compressed/ld.script @@ -1,150 +1,67 @@ +/* + * ld.script for compressed kernel support of MIPS + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin + */ + OUTPUT_ARCH(mips) ENTRY(start) SECTIONS { - /* Read-only sections, merged into text segment: */ - .init : { *(.init) } =0 - .text : - { - _ftext = . ; - *(.text) - *(.rodata) - *(.rodata1) - /* .gnu.warning sections are handled specially by elf32.em. */ - *(.gnu.warning) - } =0 - .kstrtab : { *(.kstrtab) } + /* . = VMLINUZ_LOAD_ADDRESS */ + /* read-only */ + _text = .; /* Text and read-only data */ + .text : { + _ftext = . ; + *(.text) + *(.rodata) + } = 0 + _etext = .; /* End of text section */ - . = ALIGN(16); /* Exception table */ - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; + /* writable */ + .data : { /* Data */ + _fdata = . ; + *(.data) + /* Put the compressed image here, so bss is on the end. */ + __image_begin = .; + *(.image) + __image_end = .; + CONSTRUCTORS + } + .sdata : { *(.sdata) } + . = ALIGN(4); + _edata = .; /* End of data section */ - __start___dbe_table = .; /* Exception table for data bus errors */ - __dbe_table : { *(__dbe_table) } - __stop___dbe_table = .; + /* BSS */ + __bss_start = .; + _fbss = .; + .sbss : { *(.sbss) *(.scommon) } + .bss : { + *(.dynbss) + *(.bss) + *(COMMON) + } + . = ALIGN(4); + _end = . ; - __start___ksymtab = .; /* Kernel symbol table */ - __ksymtab : { *(__ksymtab) } - __stop___ksymtab = .; + /* These are needed for ELF backends which have not yet been converted + * to the new style linker. */ - _etext = .; + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } - . = ALIGN(8192); - .data.init_task : { *(.data.init_task) } + /* These must appear regardless of . */ + .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } + .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } - /* Startup code */ - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(16); - __setup_start = .; - .setup.init : { *(.setup.init) } - __setup_end = .; - __initcall_start = .; - .initcall.init : { *(.initcall.init) } - __initcall_end = .; - . = ALIGN(4096); /* Align double page for init_task_union */ - __init_end = .; - - . = ALIGN(4096); - .data.page_aligned : { *(.data.idt) } - - . = ALIGN(32); - .data.cacheline_aligned : { *(.data.cacheline_aligned) } - - .fini : { *(.fini) } =0 - .reginfo : { *(.reginfo) } - /* Adjust the address for the data segment. We want to adjust up to - the same address within the page on the next page up. It would - be more correct to do this: - . = .; - The current expression does not correctly handle the case of a - text segment ending precisely at the end of a page; it causes the - data segment to skip a page. The above expression does not have - this problem, but it will currently (2/95) cause BFD to allocate - a single segment, combining both text and data, for this case. - This will prevent the text segment from being shared among - multiple executions of the program; I think that is more - important than losing a page of the virtual address space (note - that no actual memory is lost; the page which is skipped can not - be referenced). */ - . = .; - .data : - { - _fdata = . ; - *(.data) - - /* Put the compressed image here, so bss is on the end. */ - __image_begin = .; - *(.image) - __image_end = .; - /* Align the initial ramdisk image (INITRD) on page boundaries. */ - . = ALIGN(4096); - __ramdisk_begin = .; - *(.initrd) - __ramdisk_end = .; - . = ALIGN(4096); - - CONSTRUCTORS - } - .data1 : { *(.data1) } - _gp = . + 0x8000; - .lit8 : { *(.lit8) } - .lit4 : { *(.lit4) } - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - .got : { *(.got.plt) *(.got) } - .dynamic : { *(.dynamic) } - /* We want the small data sections together, so single-instruction offsets - can access them all, and initialized data all before uninitialized, so - we can shorten the on-disk segment size. */ - .sdata : { *(.sdata) } - . = ALIGN(4); - _edata = .; - PROVIDE (edata = .); - - __bss_start = .; - _fbss = .; - .sbss : { *(.sbss) *(.scommon) } - .bss : - { - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - _end = . ; - PROVIDE (end = .); - } - - /* Sections to be discarded */ - /DISCARD/ : - { - *(.text.exit) - *(.data.exit) - *(.exitcall.exit) - } - - /* This is the MIPS specific mdebug section. */ - .mdebug : { *(.mdebug) } - /* These are needed for ELF backends which have not yet been - converted to the new style linker. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - /* DWARF debug sections. - Symbols in the .debug DWARF section are relative to the beginning of the - section so we begin .debug at 0. It's not clear yet what needs to happen - for the others. */ - .debug 0 : { *(.debug) } - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_sfnames 0 : { *(.debug_sfnames) } - .line 0 : { *(.line) } - /* These must appear regardless of . */ - .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } - .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } - .comment : { *(.comment) } - .note : { *(.note) } + /* Sections to be discarded */ + /DISCARD/ : { + *(.MIPS.options) + *(.options) + *(.pdr) + *(.reginfo) + *(.comment) + *(.note) + } } From 66a0f0f2a20a8df2cdf22e911839c29c462836f3 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 10 Dec 2009 14:00:39 +0900 Subject: [PATCH 0736/1626] MIPS: VR41xx: Use strlcat() for the command line arguments Signed-off-by: Yoichi Yuasa Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/784/ Signed-off-by: Ralf Baechle --- arch/mips/vr41xx/common/init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c index 1386e6f081c8..23916321cc1b 100644 --- a/arch/mips/vr41xx/common/init.c +++ b/arch/mips/vr41xx/common/init.c @@ -1,7 +1,7 @@ /* * init.c, Common initialization routines for NEC VR4100 series. * - * Copyright (C) 2003-2008 Yoichi Yuasa + * Copyright (C) 2003-2009 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -66,9 +66,9 @@ void __init prom_init(void) argv = (char **)fw_arg1; for (i = 1; i < argc; i++) { - strcat(arcs_cmdline, argv[i]); + strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE); if (i < (argc - 1)) - strcat(arcs_cmdline, " "); + strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE); } } From 05c694681e059b9e99449bb239367ab486cd1fca Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 12 Dec 2009 17:57:39 +0100 Subject: [PATCH 0737/1626] MIPS: BCM63xx: Fix whitespace damaged board_bcm963xx.c Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/boards/board_bcm963xx.c | 33 +++++++++++------------ 1 file changed, 16 insertions(+), 17 deletions(-) diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 05a35cf5963d..1fe412c43171 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -346,27 +346,26 @@ static struct board_info __initdata board_96348gw = { }; static struct board_info __initdata board_FAST2404 = { - .name = "F@ST2404", - .expected_cpu_id = 0x6348, + .name = "F@ST2404", + .expected_cpu_id = 0x6348, - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, - .enet0 = { - .has_phy = 1, - .use_internal_phy = 1, - }, + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, - .enet1 = { - .force_speed_100 = 1, - .force_duplex_full = 1, - }, + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, - - .has_ohci0 = 1, - .has_pccard = 1, - .has_ehci0 = 1, + .has_ohci0 = 1, + .has_pccard = 1, + .has_ehci0 = 1, }; static struct board_info __initdata board_DV201AMR = { From 42ecda1ae80b4b19c3c7ba36e3141c4c19e1fe70 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 13 Dec 2009 12:40:39 +0100 Subject: [PATCH 0738/1626] MIPS: Alchemy: Correct code taking the size of a pointer sizeof(dp) is just the size of the pointer. Change it to the size of the referenced structure. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression *x; expression f; type T; @@ *f(...,(T)x,...) // Signed-off-by: Julia Lawall Patchwork: http://patchwork.linux-mips.org/patch/789/ Signed-off-by: Ralf Baechle --- arch/mips/alchemy/common/dbdma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index 19c1c82849ff..5c68569344c1 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -613,7 +613,7 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) dma_cache_wback_inv((unsigned long)buf, nbytes); dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ au_sync(); - dma_cache_wback_inv((unsigned long)dp, sizeof(dp)); + dma_cache_wback_inv((unsigned long)dp, sizeof(*dp)); ctp->chan_ptr->ddma_dbell = 0; /* Get next descriptor pointer. */ @@ -676,7 +676,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) dma_cache_inv((unsigned long)buf, nbytes); dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ au_sync(); - dma_cache_wback_inv((unsigned long)dp, sizeof(dp)); + dma_cache_wback_inv((unsigned long)dp, sizeof(*dp)); ctp->chan_ptr->ddma_dbell = 0; /* Get next descriptor pointer. */ From 57699407faf009f2abc33e381bc82b4c81bb0585 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 18 Dec 2009 21:20:24 +0900 Subject: [PATCH 0739/1626] MIPS: AR7: Remove kgdb_enabled An unused leftover from the old KGDB implementation. Signed-off-by: Yoichi Yuasa Patchwork: http://patchwork.linux-mips.org/patch/794/ Signed-off-by: Ralf Baechle --- arch/mips/ar7/prom.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c index 5ad6f1db6567..453dd22ad416 100644 --- a/arch/mips/ar7/prom.c +++ b/arch/mips/ar7/prom.c @@ -219,14 +219,6 @@ static void __init console_config(void) if (strstr(prom_getcmdline(), "console=")) return; -#ifdef CONFIG_KGDB - if (!strstr(prom_getcmdline(), "nokgdb")) { - strcat(prom_getcmdline(), " console=kgdb"); - kgdb_enabled = 1; - return; - } -#endif - s = prom_getenv("modetty0"); if (s) { baud = simple_strtoul(s, &p, 10); From 99d2b173e5e14d10d2179d342d91c5bed0e8832d Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 18 Dec 2009 21:29:17 +0900 Subject: [PATCH 0740/1626] MIPS: PowerTV: Remove unused prom_getcmdline() Signed-off-by: Yoichi Yuasa Patchwork: http://patchwork.linux-mips.org/patch/797/ Reviewed-by: David VomLehn Signed-off-by: Ralf Baechle --- arch/mips/powertv/cmdline.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/mips/powertv/cmdline.c b/arch/mips/powertv/cmdline.c index 98d73cb0d452..ee7ab4723067 100644 --- a/arch/mips/powertv/cmdline.c +++ b/arch/mips/powertv/cmdline.c @@ -31,11 +31,6 @@ */ #define prom_argv(index) ((char *)(long)_prom_argv[(index)]) -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - void __init prom_init_cmdline(void) { int len; From 09b7c9f24d8e9b772da682b52b83c88f426a849d Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 18 Dec 2009 21:30:18 +0900 Subject: [PATCH 0741/1626] MIPS: PowerTV: Remove unused ptv_memsize Signed-off-by: Yoichi Yuasa Patchwork: http://patchwork.linux-mips.org/patch/799/ Reviewed-by: David VomLehn Signed-off-by: Ralf Baechle --- arch/mips/powertv/memory.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c index 28d06605fff6..f49eb3d0358b 100644 --- a/arch/mips/powertv/memory.c +++ b/arch/mips/powertv/memory.c @@ -42,8 +42,6 @@ #define BOOT_MEM_SIZE KIBIBYTE(256) /* Memory reserved for bldr */ #define PHYS_MEM_START 0x10000000 /* Start of physical memory */ -unsigned long ptv_memsize; - char __initdata cmdline[COMMAND_LINE_SIZE]; void __init prom_meminit(void) @@ -87,9 +85,6 @@ void __init prom_meminit(void) } } - /* Store memsize for diagnostic purposes */ - ptv_memsize = memsize; - physend = PFN_ALIGN(&_end) - 0x80000000; if (memsize > LOW_MEM_MAX) { low_mem = LOW_MEM_MAX; From 2620c3570f748647afb17e095507099a309ed8f6 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 18 Dec 2009 21:33:46 +0900 Subject: [PATCH 0742/1626] MIPS: PowerTV: Remove mips_machine_halt() mips_machine_halt() is same as mips_machine_restart(). Also delete the registration of _machine_halt and pm_power_off because mips_machine_halt() is the restart function. Signed-off-by: Yoichi Yuasa Patchwork: http://patchwork.linux-mips.org/patch/798/ Reviewed-by: David VomLehn Signed-off-by: Ralf Baechle --- arch/mips/powertv/reset.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/arch/mips/powertv/reset.c b/arch/mips/powertv/reset.c index 494c652c984b..0007652cb774 100644 --- a/arch/mips/powertv/reset.c +++ b/arch/mips/powertv/reset.c @@ -28,9 +28,6 @@ #include #include "reset.h" -static void mips_machine_restart(char *command); -static void mips_machine_halt(void); - static void mips_machine_restart(char *command) { #ifdef CONFIG_BOOTLOADER_DRIVER @@ -44,22 +41,7 @@ static void mips_machine_restart(char *command) #endif } -static void mips_machine_halt(void) -{ -#ifdef CONFIG_BOOTLOADER_DRIVER - /* - * Call the bootloader's reset function to ensure - * that persistent data is flushed before hard reset - */ - kbldr_SetCauseAndReset(); -#else - writel(0x1, asic_reg_addr(watchdog)); -#endif -} - void mips_reboot_setup(void) { _machine_restart = mips_machine_restart; - _machine_halt = mips_machine_halt; - pm_power_off = mips_machine_halt; } From 0eb99a9354cfe73dfa76ef81c917f7655b1b306c Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 18 Dec 2009 21:36:32 +0900 Subject: [PATCH 0743/1626] MIPS: PowerTV: Remove unused platform_die() Signed-off-by: Yoichi Yuasa Patchwork: http://patchwork.linux-mips.org/patch/800/ Reviewed-by: David VomLehn Signed-off-by: Ralf Baechle --- arch/mips/powertv/powertv_setup.c | 21 --------------------- 1 file changed, 21 deletions(-) diff --git a/arch/mips/powertv/powertv_setup.c b/arch/mips/powertv/powertv_setup.c index bd8ebf128f29..698b1eafbe98 100644 --- a/arch/mips/powertv/powertv_setup.c +++ b/arch/mips/powertv/powertv_setup.c @@ -64,9 +64,6 @@ #define REG_SIZE "4" /* In bytes */ #endif -static struct pt_regs die_regs; -static bool have_die_regs; - static void register_panic_notifier(void); static int panic_handler(struct notifier_block *notifier_block, unsigned long event, void *cause_string); @@ -218,24 +215,6 @@ static int panic_handler(struct notifier_block *notifier_block, return NOTIFY_DONE; } -/** - * Platform-specific handling of oops - * @str: Pointer to the oops string - * @regs: Pointer to the oops registers - * All we do here is to save the registers for subsequent printing through - * the panic notifier. - */ -void platform_die(const char *str, const struct pt_regs *regs) -{ - /* If we already have saved registers, don't overwrite them as they - * they apply to the initial fault */ - - if (!have_die_regs) { - have_die_regs = true; - die_regs = *regs; - } -} - /* Information about the RF MAC address, if one was supplied on the * command line. */ static bool have_rfmac; From 7e326d687d182e45447c24daccaa9b60bae130d5 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 18 Dec 2009 21:38:37 +0900 Subject: [PATCH 0744/1626] MIPS: PowerTV: simplify prom_init_cmdline() and merge into prom_init() Signed-off-by: Yoichi Yuasa Patchwork: http://patchwork.linux-mips.org/patch/801/ Reviewed-by: David VomLehn Signed-off-by: Ralf Baechle --- arch/mips/powertv/Makefile | 2 +- arch/mips/powertv/cmdline.c | 47 ------------------------------------- arch/mips/powertv/init.c | 15 +++++++----- arch/mips/powertv/init.h | 2 -- 4 files changed, 10 insertions(+), 56 deletions(-) delete mode 100644 arch/mips/powertv/cmdline.c diff --git a/arch/mips/powertv/Makefile b/arch/mips/powertv/Makefile index 2c516718affe..0a0d73c0564f 100644 --- a/arch/mips/powertv/Makefile +++ b/arch/mips/powertv/Makefile @@ -23,6 +23,6 @@ # under Linux. # -obj-y += cmdline.o init.o memory.o reset.o time.o powertv_setup.o asic/ pci/ +obj-y += init.o memory.o reset.o time.o powertv_setup.o asic/ pci/ EXTRA_CFLAGS += -Wall -Werror diff --git a/arch/mips/powertv/cmdline.c b/arch/mips/powertv/cmdline.c deleted file mode 100644 index ee7ab4723067..000000000000 --- a/arch/mips/powertv/cmdline.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * Portions copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Kernel command line creation using the prom monitor (YAMON) argc/argv. - */ -#include -#include - -#include - -#include "init.h" - -/* - * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. - * This macro take care of sign extension. - */ -#define prom_argv(index) ((char *)(long)_prom_argv[(index)]) - -void __init prom_init_cmdline(void) -{ - int len; - - if (prom_argc != 1) - return; - - len = strlen(arcs_cmdline); - - arcs_cmdline[len] = ' '; - - strlcpy(arcs_cmdline + len + 1, (char *)_prom_argv, - COMMAND_LINE_SIZE - len - 1); -} diff --git a/arch/mips/powertv/init.c b/arch/mips/powertv/init.c index 5f4e4c304e48..de0e46ab0957 100644 --- a/arch/mips/powertv/init.c +++ b/arch/mips/powertv/init.c @@ -34,10 +34,7 @@ #include #include -#include "init.h" - -int prom_argc; -int *_prom_argv, *_prom_envp; +static int *_prom_envp; unsigned long _prom_memsize; /* @@ -109,8 +106,11 @@ static void __init mips_ejtag_setup(void) void __init prom_init(void) { + int prom_argc; + char *prom_argv; + prom_argc = fw_arg0; - _prom_argv = (int *) fw_arg1; + prom_argv = (char *) fw_arg1; _prom_envp = (int *) fw_arg2; _prom_memsize = (unsigned long) fw_arg3; @@ -118,7 +118,10 @@ void __init prom_init(void) board_ejtag_handler_setup = mips_ejtag_setup; pr_info("\nLINUX started...\n"); - prom_init_cmdline(); + + if (prom_argc == 1) + strlcat(arcs_cmdline, prom_argv, COMMAND_LINE_SIZE); + configure_platform(); prom_meminit(); diff --git a/arch/mips/powertv/init.h b/arch/mips/powertv/init.h index 7af6bf25008c..b194c34ca966 100644 --- a/arch/mips/powertv/init.h +++ b/arch/mips/powertv/init.h @@ -22,7 +22,5 @@ #ifndef _POWERTV_INIT_H #define _POWERTV_INIT_H -extern int prom_argc; -extern int *_prom_argv; extern unsigned long _prom_memsize; #endif From 98bea6fc87390b6a12f595ad06fc686712435f94 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 22 Dec 2009 00:48:57 +0900 Subject: [PATCH 0745/1626] MIPS: TXx9: Cleanup builtin-cmdline processing Since commit 898d357b5262f9e26bc2418e01f8676e80d9867e (lmo) / 6acc7d485c24c00e111c61b2e6dff9180faebcae (kernel.org) ("Fix and enhance built-in kernel command line") arcs_cmdline[] does not contain built-in command line. The commit introduce CONFIG_CMDLINE_BOOL and CONFIG_CMDLINE_OVERRIDE to control built-in command line, and now we can use them instead of platform-specific built-in command line processing. Signed-off-by: Atsushi Nemoto Patchwork: http://patchwork.linux-mips.org/patch/802/ Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 21 --------------------- 1 file changed, 21 deletions(-) diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 06e801c7e258..e27809b6d04f 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -160,7 +160,6 @@ static void __init prom_init_cmdline(void) int argc; int *argv32; int i; /* Always ignore the "-c" at argv[0] */ - static char builtin[COMMAND_LINE_SIZE] __initdata; if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) { /* @@ -174,20 +173,6 @@ static void __init prom_init_cmdline(void) argv32 = (int *)fw_arg1; } - /* ignore all built-in args if any f/w args given */ - /* - * But if built-in strings was started with '+', append them - * to command line args. If built-in was started with '-', - * ignore all f/w args. - */ - builtin[0] = '\0'; - if (arcs_cmdline[0] == '+') - strcpy(builtin, arcs_cmdline + 1); - else if (arcs_cmdline[0] == '-') { - strcpy(builtin, arcs_cmdline + 1); - argc = 0; - } else if (argc <= 1) - strcpy(builtin, arcs_cmdline); arcs_cmdline[0] = '\0'; for (i = 1; i < argc; i++) { @@ -201,12 +186,6 @@ static void __init prom_init_cmdline(void) } else strcat(arcs_cmdline, str); } - /* append saved builtin args */ - if (builtin[0]) { - if (arcs_cmdline[0]) - strcat(arcs_cmdline, " "); - strcat(arcs_cmdline, builtin); - } } static int txx9_ic_disable __initdata; From c6a3c851a287980e47b45bf191a3b78d9d8508e2 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 23 Dec 2009 13:18:54 -0800 Subject: [PATCH 0746/1626] MIPS: Octeon: Add sched_clock() to csrc-octeon.c With the advent of function graph tracing on MIPS, Octeon needs a high precision sched_clock() implementation. Without it, most timing numbers are reported as 0.000. This new sched_clock just uses the 64-bit cycle counter appropriately scaled. Signed-off-by: David Daney Patchwork: http://patchwork.linux-mips.org/patch/805/ Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/csrc-octeon.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c index 96110f217dcd..96df821fbd81 100644 --- a/arch/mips/cavium-octeon/csrc-octeon.c +++ b/arch/mips/cavium-octeon/csrc-octeon.c @@ -50,6 +50,13 @@ static struct clocksource clocksource_mips = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +unsigned long long notrace sched_clock(void) +{ + return clocksource_cyc2ns(read_c0_cvmcount(), + clocksource_mips.mult, + clocksource_mips.shift); +} + void __init plat_time_init(void) { clocksource_mips.rating = 300; From 0833c76bd894b797f353e32c5eadfe16855bcf69 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 24 Dec 2009 17:06:34 +0900 Subject: [PATCH 0747/1626] MIPS: Cobalt use strlcat() for the command line arguments Tested with CoLo v1.22 Signed-off-by: Yoichi Yuasa Patchwork: http://patchwork.linux-mips.org/patch/807/ Signed-off-by: Ralf Baechle --- arch/mips/cobalt/setup.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-) diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c index b51644227241..ec3b2c417f7c 100644 --- a/arch/mips/cobalt/setup.c +++ b/arch/mips/cobalt/setup.c @@ -97,26 +97,18 @@ void __init plat_mem_setup(void) void __init prom_init(void) { - int narg, indx, posn, nchr; unsigned long memsz; + int argc, i; char **argv; memsz = fw_arg0 & 0x7fff0000; - narg = fw_arg0 & 0x0000ffff; + argc = fw_arg0 & 0x0000ffff; + argv = (char **)fw_arg1; - if (narg) { - arcs_cmdline[0] = '\0'; - argv = (char **) fw_arg1; - posn = 0; - for (indx = 1; indx < narg; ++indx) { - nchr = strlen(argv[indx]); - if (posn + 1 + nchr + 1 > sizeof(arcs_cmdline)) - break; - if (posn) - arcs_cmdline[posn++] = ' '; - strcpy(arcs_cmdline + posn, argv[indx]); - posn += nchr; - } + for (i = 1; i < argc; i++) { + strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE); + if (i < (argc - 1)) + strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE); } add_memory_region(0x0, memsz, BOOT_MEM_RAM); From 1dc238632bbb4283ba2c789b2aeadb1a2743eb4f Mon Sep 17 00:00:00 2001 From: David VomLehn Date: Mon, 21 Dec 2009 17:43:42 -0800 Subject: [PATCH 0748/1626] MIPS: PowerTV: Remove extra r4k_clockevent_init() call A call to r4k_clocksource_init() was added to plat_time_init(), but when init_mips_clock_source() calls the same function, boot fails in clockevents_register_device(). This patch removes the extraneous call. Signed-off-by: David VomLehn Patchwork: http://patchwork.linux-mips.org/patch/803/ Signed-off-by: Ralf Baechle --- arch/mips/powertv/time.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/mips/powertv/time.c b/arch/mips/powertv/time.c index 1e0a5ef4c8c7..9fd7b67f2af7 100644 --- a/arch/mips/powertv/time.c +++ b/arch/mips/powertv/time.c @@ -33,5 +33,4 @@ unsigned int __cpuinit get_c0_compare_int(void) void __init plat_time_init(void) { powertv_clocksource_init(); - r4k_clockevent_init(); } From 70b5c8194f1ecfab5f7e8db3590e7ef7996d893e Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sun, 3 Jan 2010 14:13:04 +0900 Subject: [PATCH 0749/1626] MIPS: AR7: Remove unused prom_getchar() Signed-off-by: Yoichi Yuasa Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/811/ Signed-off-by: Ralf Baechle --- arch/mips/ar7/prom.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c index 453dd22ad416..c1fdd3682812 100644 --- a/arch/mips/ar7/prom.c +++ b/arch/mips/ar7/prom.c @@ -272,13 +272,6 @@ static inline void serial_out(int offset, int value) writel(value, (void *)PORT(offset)); } -char prom_getchar(void) -{ - while (!(serial_in(UART_LSR) & UART_LSR_DR)) - ; - return serial_in(UART_RX); -} - int prom_putchar(char c) { while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0) From 0622870a641f17f9ea10be82d5a8770d0e16c19b Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sun, 3 Jan 2010 14:39:11 +0900 Subject: [PATCH 0750/1626] MIPS: BCM63xx: Remove duplicate CONFIG_CMDLINE. Builtin cmdline is copied by arch_mem_init(). Signed-off-by: Yoichi Yuasa Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/812/ Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/prom.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c index fb284fbc5853..be252efa0757 100644 --- a/arch/mips/bcm63xx/prom.c +++ b/arch/mips/bcm63xx/prom.c @@ -40,9 +40,6 @@ void __init prom_init(void) reg &= ~mask; bcm_perf_writel(reg, PERF_CKCTL_REG); - /* assign command line from kernel config */ - strcpy(arcs_cmdline, CONFIG_CMDLINE); - /* register gpiochip */ bcm63xx_gpio_init(); From 9b54dc5869c3989077e456c57e51810f0a1bdbcb Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sun, 3 Jan 2010 14:47:34 +0900 Subject: [PATCH 0751/1626] MIPS: Malta, PowerTV: Remove unnecessary "Linux started" Signed-off-by: Yoichi Yuasa Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/813/ Signed-off-by: Ralf Baechle --- arch/mips/mipssim/sim_setup.c | 4 ---- arch/mips/mti-malta/malta-init.c | 1 - arch/mips/powertv/init.c | 2 -- 3 files changed, 7 deletions(-) diff --git a/arch/mips/mipssim/sim_setup.c b/arch/mips/mipssim/sim_setup.c index 0824f6af4777..55f22a3afe61 100644 --- a/arch/mips/mipssim/sim_setup.c +++ b/arch/mips/mipssim/sim_setup.c @@ -49,9 +49,6 @@ void __init plat_mem_setup(void) set_io_port_base(0xbfd00000); serial_init(); - - pr_info("Linux started...\n"); - } extern struct plat_smp_ops ssmtc_smp_ops; @@ -60,7 +57,6 @@ void __init prom_init(void) { set_io_port_base(0xbfd00000); - pr_info("\nLINUX started...\n"); prom_meminit(); #ifdef CONFIG_MIPS_MT_SMP diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index f1b14c8a4a1c..414f0c99b196 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -355,7 +355,6 @@ void __init prom_init(void) board_nmi_handler_setup = mips_nmi_setup; board_ejtag_handler_setup = mips_ejtag_setup; - pr_info("\nLINUX started...\n"); prom_init_cmdline(); prom_meminit(); #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/mips/powertv/init.c b/arch/mips/powertv/init.c index de0e46ab0957..0afe227f1d0a 100644 --- a/arch/mips/powertv/init.c +++ b/arch/mips/powertv/init.c @@ -117,8 +117,6 @@ void __init prom_init(void) board_nmi_handler_setup = mips_nmi_setup; board_ejtag_handler_setup = mips_ejtag_setup; - pr_info("\nLINUX started...\n"); - if (prom_argc == 1) strlcat(arcs_cmdline, prom_argv, COMMAND_LINE_SIZE); From 0e8a1d8262f41d6e8c1d736a408882bbb7a5c0a6 Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 8 Jan 2010 14:47:36 -0800 Subject: [PATCH 0752/1626] MIPS: Octeon: Use non-overflowing arithmetic in sched_clock With typical mult and shift values, the calculation for Octeon's sched_clock overflows when using 64-bit arithmetic. Use 128-bit calculations instead. Signed-off-by: David Daney To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/849/ Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/csrc-octeon.c | 31 ++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c index 96df821fbd81..0bf4bbe04ae2 100644 --- a/arch/mips/cavium-octeon/csrc-octeon.c +++ b/arch/mips/cavium-octeon/csrc-octeon.c @@ -52,9 +52,34 @@ static struct clocksource clocksource_mips = { unsigned long long notrace sched_clock(void) { - return clocksource_cyc2ns(read_c0_cvmcount(), - clocksource_mips.mult, - clocksource_mips.shift); + /* 64-bit arithmatic can overflow, so use 128-bit. */ +#if (__GNUC__ < 4) || ((__GNUC__ == 4) && (__GNUC_MINOR__ <= 3)) + u64 t1, t2, t3; + unsigned long long rv; + u64 mult = clocksource_mips.mult; + u64 shift = clocksource_mips.shift; + u64 cnt = read_c0_cvmcount(); + + asm ( + "dmultu\t%[cnt],%[mult]\n\t" + "nor\t%[t1],$0,%[shift]\n\t" + "mfhi\t%[t2]\n\t" + "mflo\t%[t3]\n\t" + "dsll\t%[t2],%[t2],1\n\t" + "dsrlv\t%[rv],%[t3],%[shift]\n\t" + "dsllv\t%[t1],%[t2],%[t1]\n\t" + "or\t%[rv],%[t1],%[rv]\n\t" + : [rv] "=&r" (rv), [t1] "=&r" (t1), [t2] "=&r" (t2), [t3] "=&r" (t3) + : [cnt] "r" (cnt), [mult] "r" (mult), [shift] "r" (shift) + : "hi", "lo"); + return rv; +#else + /* GCC > 4.3 do it the easy way. */ + unsigned int __attribute__((mode(TI))) t; + t = read_c0_cvmcount(); + t = t * clocksource_mips.mult; + return (unsigned long long)(t >> clocksource_mips.shift); +#endif } void __init plat_time_init(void) From d797396f3387c5be8f63fcc8e9be98bb884ea86a Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 6 Jan 2010 15:55:13 +1100 Subject: [PATCH 0753/1626] MIPS: cpumask_of_node() should handle -1 as a node pcibus_to_node can return -1 if we cannot determine which node a pci bus is on. If passed -1, cpumask_of_node will negatively index the lookup array and pull in random data: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus 00000000,00000003,00000000,00000000 # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 64-65 Change cpumask_of_node to check for -1 and return cpu_all_mask in this case: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus ffffffff,ffffffff,ffffffff,ffffffff # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 0-127 Signed-off-by: Anton Blanchard Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Rusty Russell Cc: Andrew Morton Patchwork: http://patchwork.linux-mips.org/patch/831/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-ip27/topology.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h index 09a59bcc1b07..1b1a7d1632b9 100644 --- a/arch/mips/include/asm/mach-ip27/topology.h +++ b/arch/mips/include/asm/mach-ip27/topology.h @@ -24,7 +24,9 @@ extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS]; #define cpu_to_node(cpu) (sn_cpu_info[(cpu)].p_nodeid) #define parent_node(node) (node) -#define cpumask_of_node(node) (&hub_data(node)->h_cpus) +#define cpumask_of_node(node) ((node) == -1 ? \ + cpu_all_mask : \ + &hub_data(node)->h_cpus) struct pci_bus; extern int pcibus_to_node(struct pci_bus *); From 17f964e881e125917cbeea8eb82271cc68485a22 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 18 Dec 2009 21:13:17 +0900 Subject: [PATCH 0754/1626] MIPS: Move vmlinux.ecoff to arch/mips/boot It moves to the same directory as the boot files in other formats. Signed-off-by: Yoichi Yuasa Cc: linux-mips Patchwork: http://patchwork.linux-mips.org/patch/796/ Signed-off-by: Ralf Baechle --- arch/mips/boot/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile index 094bc84765a3..e39a08edcaaa 100644 --- a/arch/mips/boot/Makefile +++ b/arch/mips/boot/Makefile @@ -28,7 +28,7 @@ VMLINUX = vmlinux all: vmlinux.ecoff vmlinux.srec vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX) - $(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS) + $(obj)/elf2ecoff $(VMLINUX) $(obj)/vmlinux.ecoff $(E2EFLAGS) $(obj)/elf2ecoff: $(obj)/elf2ecoff.c $(HOSTCC) -o $@ $^ From 9a3065c942d59afcc1b71bb75743d9f37fcc2954 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 18 Dec 2009 21:14:19 +0900 Subject: [PATCH 0755/1626] MIPS: Ignore vmlinux.* Signed-off-by: Yoichi Yuasa Cc: linux-mips Patchwork: http://patchwork.linux-mips.org/patch/795/ Signed-off-by: Ralf Baechle --- arch/mips/boot/.gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/boot/.gitignore b/arch/mips/boot/.gitignore index ba63401c6e10..4667a5f9280b 100644 --- a/arch/mips/boot/.gitignore +++ b/arch/mips/boot/.gitignore @@ -1,4 +1,5 @@ mkboot elf2ecoff +vmlinux.* zImage zImage.tmp From 15e184afa83a45cf8bafdb9dc906b97a8fbc974f Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 11 Jan 2010 00:05:43 -0800 Subject: [PATCH 0756/1626] Input: add compat support for sysfs and /proc capabilities output Input core displays capabilities bitmasks in form of one or more longs printed in hex form and separated by spaces. Unfortunately it does not work well for 32-bit applications running on 64-bit kernels since applications expect that number is "worth" only 32 bits when kernel advances by 64 bits. Fix that by ensuring that output produced for compat tasks uses 32-bit units. Reported-and-tested-by: Michael Tokarev Signed-off-by: Dmitry Torokhov --- drivers/input/input.c | 84 +++++++++++++++++++++++++++++++++++-------- 1 file changed, 70 insertions(+), 14 deletions(-) diff --git a/drivers/input/input.c b/drivers/input/input.c index ab060710688f..30b503b8d67b 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -24,6 +24,7 @@ #include #include #include +#include "input-compat.h" MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("Input core"); @@ -764,6 +765,40 @@ static int input_attach_handler(struct input_dev *dev, struct input_handler *han return error; } +#ifdef CONFIG_COMPAT + +static int input_bits_to_string(char *buf, int buf_size, + unsigned long bits, bool skip_empty) +{ + int len = 0; + + if (INPUT_COMPAT_TEST) { + u32 dword = bits >> 32; + if (dword || !skip_empty) + len += snprintf(buf, buf_size, "%x ", dword); + + dword = bits & 0xffffffffUL; + if (dword || !skip_empty || len) + len += snprintf(buf + len, max(buf_size - len, 0), + "%x", dword); + } else { + if (bits || !skip_empty) + len += snprintf(buf, buf_size, "%lx", bits); + } + + return len; +} + +#else /* !CONFIG_COMPAT */ + +static int input_bits_to_string(char *buf, int buf_size, + unsigned long bits, bool skip_empty) +{ + return bits || !skip_empty ? + snprintf(buf, buf_size, "%lx", bits) : 0; +} + +#endif #ifdef CONFIG_PROC_FS @@ -832,14 +867,25 @@ static void input_seq_print_bitmap(struct seq_file *seq, const char *name, unsigned long *bitmap, int max) { int i; - - for (i = BITS_TO_LONGS(max) - 1; i > 0; i--) - if (bitmap[i]) - break; + bool skip_empty = true; + char buf[18]; seq_printf(seq, "B: %s=", name); - for (; i >= 0; i--) - seq_printf(seq, "%lx%s", bitmap[i], i > 0 ? " " : ""); + + for (i = BITS_TO_LONGS(max) - 1; i >= 0; i--) { + if (input_bits_to_string(buf, sizeof(buf), + bitmap[i], skip_empty)) { + skip_empty = false; + seq_printf(seq, "%s%s", buf, i > 0 ? " " : ""); + } + } + + /* + * If no output was produced print a single 0. + */ + if (skip_empty) + seq_puts(seq, "0"); + seq_putc(seq, '\n'); } @@ -1128,14 +1174,23 @@ static int input_print_bitmap(char *buf, int buf_size, unsigned long *bitmap, { int i; int len = 0; + bool skip_empty = true; - for (i = BITS_TO_LONGS(max) - 1; i > 0; i--) - if (bitmap[i]) - break; + for (i = BITS_TO_LONGS(max) - 1; i >= 0; i--) { + len += input_bits_to_string(buf + len, max(buf_size - len, 0), + bitmap[i], skip_empty); + if (len) { + skip_empty = false; + if (i > 0) + len += snprintf(buf + len, max(buf_size - len, 0), " "); + } + } - for (; i >= 0; i--) - len += snprintf(buf + len, max(buf_size - len, 0), - "%lx%s", bitmap[i], i > 0 ? " " : ""); + /* + * If no output was produced print a single 0. + */ + if (len == 0) + len = snprintf(buf, buf_size, "%d", 0); if (add_cr) len += snprintf(buf + len, max(buf_size - len, 0), "\n"); @@ -1150,7 +1205,8 @@ static ssize_t input_dev_show_cap_##bm(struct device *dev, \ { \ struct input_dev *input_dev = to_input_dev(dev); \ int len = input_print_bitmap(buf, PAGE_SIZE, \ - input_dev->bm##bit, ev##_MAX, 1); \ + input_dev->bm##bit, ev##_MAX, \ + true); \ return min_t(int, len, PAGE_SIZE); \ } \ static DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL) @@ -1214,7 +1270,7 @@ static int input_add_uevent_bm_var(struct kobj_uevent_env *env, len = input_print_bitmap(&env->buf[env->buflen - 1], sizeof(env->buf) - env->buflen, - bitmap, max, 0); + bitmap, max, false); if (len >= (sizeof(env->buf) - env->buflen)) return -ENOMEM; From 7511bce4069de39ea04b14c1e1d55c249f9ce808 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 12 Jan 2010 18:59:16 +0000 Subject: [PATCH 0757/1626] ARM: Fix wrong dmb The __kuser_cmpxchg code uses an ARMv6 dmb instruction, rather than one based upon the architecture being built for. Switch to using the macro provided for this purpose, which also eliminates the need for an ifdef. Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index d2903e3bc861..6c5cf369183b 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -957,9 +957,7 @@ kuser_cmpxchg_fixup: #else -#ifdef CONFIG_SMP - mcr p15, 0, r0, c7, c10, 5 @ dmb -#endif + smp_dmb 1: ldrex r3, [r2] subs r3, r3, r0 strexeq r3, r1, [r2] From aff7b4f86737f1ae364bf5ece9a9b8586ddb2db4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 12 Jan 2010 19:02:05 +0000 Subject: [PATCH 0758/1626] ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options A kernel with both ARMv6 and ARMv7 selected results in build errors. Fix this by specifying the proper architectures for these assembly files. Signed-off-by: Russell King --- arch/arm/mm/Makefile | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 827e238e5d4a..e8d34a80851c 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -27,6 +27,9 @@ obj-$(CONFIG_CPU_ABRT_EV5TJ) += abort-ev5tj.o obj-$(CONFIG_CPU_ABRT_EV6) += abort-ev6.o obj-$(CONFIG_CPU_ABRT_EV7) += abort-ev7.o +AFLAGS_abort-ev6.o :=-Wa,-march=armv6k +AFLAGS_abort-ev7.o :=-Wa,-march=armv7-a + obj-$(CONFIG_CPU_PABRT_LEGACY) += pabort-legacy.o obj-$(CONFIG_CPU_PABRT_V6) += pabort-v6.o obj-$(CONFIG_CPU_PABRT_V7) += pabort-v7.o @@ -39,6 +42,9 @@ obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o +AFLAGS_cache-v6.o :=-Wa,-march=armv6 +AFLAGS_cache-v7.o :=-Wa,-march=armv7-a + obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o @@ -58,6 +64,9 @@ obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o obj-$(CONFIG_CPU_TLB_FA) += tlb-fa.o +AFLAGS_tlb-v6.o :=-Wa,-march=armv6 +AFLAGS_tlb-v7.o :=-Wa,-march=armv7-a + obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o obj-$(CONFIG_CPU_ARM7TDMI) += proc-arm7tdmi.o @@ -84,6 +93,9 @@ obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o obj-$(CONFIG_CPU_V6) += proc-v6.o obj-$(CONFIG_CPU_V7) += proc-v7.o +AFLAGS_proc-v6.o :=-Wa,-march=armv6 +AFLAGS_proc-v7.o :=-Wa,-march=armv7-a + obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o From a2342f46437cde56803a36fdf94da635a74ad41c Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Sat, 9 Jan 2010 23:32:06 +0100 Subject: [PATCH 0759/1626] sata_promise: don't classify overruns as HSM errors When sata_promise encounters an overrun or underrun error it translates that to a libata AC_ERR_HSM, causing a hard reset. Since over/under-runs were thought to be rare and transient, this action seemed reasonable. Unfortunately it turns out that the controller throws overrun errors when e.g. hal polls a CD or DVD writer containing blank media, causing long sequences of hard resets and retries before EH finally gives up. This patch updates sata_promise to classify over/under-runs as AC_ERR_OTHER instead. This allows libata EH and upper layers to retry or fail the operation as they see fit without the disruption caused by repeated hard resets. This fixes a problem using a DVD-RAM drive with sata_promise, reported by Thomas Schorpp. I also tested it on a DVD-RW drive. Signed-off-by: Mikael Pettersson Tested-by: thomas schorpp Signed-off-by: Jeff Garzik --- drivers/ata/sata_promise.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 07d8d00b4d34..63306285c843 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -862,7 +862,7 @@ static void pdc_error_intr(struct ata_port *ap, struct ata_queued_cmd *qc, if (port_status & PDC_DRIVE_ERR) ac_err_mask |= AC_ERR_DEV; if (port_status & (PDC_OVERRUN_ERR | PDC_UNDERRUN_ERR)) - ac_err_mask |= AC_ERR_HSM; + ac_err_mask |= AC_ERR_OTHER; if (port_status & (PDC2_ATA_HBA_ERR | PDC2_ATA_DMA_CNT_ERR)) ac_err_mask |= AC_ERR_ATA_BUS; if (port_status & (PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR | PDC2_HTO_ERR From 0b67c7439fe2a5d76602de36854c88e2beab00b0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 11 Jan 2010 17:03:11 +0900 Subject: [PATCH 0760/1626] ata_piix: enable 32bit PIO on SATA piix Commit 871af1210f13966ab911ed2166e4ab2ce775b99d enabled 32bit PIO for PATA piix but didn't for SATA. There's no reason not to use 32bit PIO on SATA piix. Enable it. Signed-off-by: Tejun Heo Cc: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 19136a7e1064..6f3f2257d0f0 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -329,7 +329,7 @@ static struct ata_port_operations ich_pata_ops = { }; static struct ata_port_operations piix_sata_ops = { - .inherits = &ata_bmdma_port_ops, + .inherits = &ata_bmdma32_port_ops, }; static struct ata_port_operations piix_sidpr_sata_ops = { From 5040ab67a2c6d5710ba497dc52a8f7035729d7b0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 11 Jan 2010 11:14:44 +0900 Subject: [PATCH 0761/1626] libata: retry link resume if necessary Interestingly, when SIDPR is used in ata_piix, writes to DET in SControl sometimes get ignored leading to detection failure. Update sata_link_resume() such that it reads back SControl after clearing DET and retry if it's not clear. Signed-off-by: Tejun Heo Reported-by: fengxiangjun Reported-by: Jim Faulkner Cc: stable@kernel.org Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 40 +++++++++++++++++++++++++++++++-------- include/linux/libata.h | 3 +++ 2 files changed, 35 insertions(+), 8 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 22ff51bdbc8a..6728328f3bea 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3790,21 +3790,45 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params, int sata_link_resume(struct ata_link *link, const unsigned long *params, unsigned long deadline) { + int tries = ATA_LINK_RESUME_TRIES; u32 scontrol, serror; int rc; if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) return rc; - scontrol = (scontrol & 0x0f0) | 0x300; - - if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) - return rc; - - /* Some PHYs react badly if SStatus is pounded immediately - * after resuming. Delay 200ms before debouncing. + /* + * Writes to SControl sometimes get ignored under certain + * controllers (ata_piix SIDPR). Make sure DET actually is + * cleared. */ - msleep(200); + do { + scontrol = (scontrol & 0x0f0) | 0x300; + if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) + return rc; + /* + * Some PHYs react badly if SStatus is pounded + * immediately after resuming. Delay 200ms before + * debouncing. + */ + msleep(200); + + /* is SControl restored correctly? */ + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) + return rc; + } while ((scontrol & 0xf0f) != 0x300 && --tries); + + if ((scontrol & 0xf0f) != 0x300) { + ata_link_printk(link, KERN_ERR, + "failed to resume link (SControl %X)\n", + scontrol); + return 0; + } + + if (tries < ATA_LINK_RESUME_TRIES) + ata_link_printk(link, KERN_WARNING, + "link resume succeeded after %d retries\n", + ATA_LINK_RESUME_TRIES - tries); if ((rc = sata_link_debounce(link, params, deadline))) return rc; diff --git a/include/linux/libata.h b/include/linux/libata.h index 6a9c4ddd3d95..73112250862c 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -354,6 +354,9 @@ enum { /* max tries if error condition is still set after ->error_handler */ ATA_EH_MAX_TRIES = 5, + /* sometimes resuming a link requires several retries */ + ATA_LINK_RESUME_TRIES = 5, + /* how hard are we gonna try to probe/recover devices */ ATA_PROBE_MAX_TRIES = 3, ATA_EH_DEV_TRIES = 3, From d8e292093a3a78a7967757e90abbe64869e4cb7c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 9 Jan 2010 00:45:33 +0100 Subject: [PATCH 0762/1626] drm/i915: Fix resume regression on MSI Wind U100 w/o KMS Commit cbda12d77ea590082edb6d30bd342a67ebc459e0 (drm/i915: implement new pm ops for i915), among other things, removed the .suspend and .resume pointers from the struct drm_driver object in i915_drv.c, which broke resume without KMS on my MSI Wind U100. Fix this by reverting that part of commit cbda12d77ea59. Signed-off-by: Rafael J. Wysocki Acked-by: Jesse Barnes [anholt: added comment explaining when .suspend/.resume matter] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 2ffffd7ae09a..66f7bac2ee55 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -464,6 +464,11 @@ static struct drm_driver driver = { .lastclose = i915_driver_lastclose, .preclose = i915_driver_preclose, .postclose = i915_driver_postclose, + + /* Used in place of i915_pm_ops for non-DRIVER_MODESET */ + .suspend = i915_suspend, + .resume = i915_resume, + .device_is_agp = i915_driver_device_is_agp, .enable_vblank = i915_enable_vblank, .disable_vblank = i915_disable_vblank, From 6207937d4feea000913e8ca23fe20c7744be7847 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 6 Jan 2010 09:49:31 +0800 Subject: [PATCH 0763/1626] drm/i915: Don't use the child device parsed from VBT to setup HDMI/DP On some boxes the BIOS will report different child device arrays when the system is booted with/without the dock. In such case the HDMI/DP port can't be setup correctly. So revert two commits (fc816655236cd9da162356e96e74c7cfb0834d92/ 6e36595a2131e7ed5ee2674be54b2713ba7f0490) that use the child device parsed from VBT to setup HDMI/DP. http://bugzilla.kernel.org/show_bug.cgi?id=14854 http://bugzilla.kernel.org/show_bug.cgi?id=14860 Signed-off-by: Zhao Yakui Tested-by: Sean Young Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_dp.c | 50 ------------------------------- drivers/gpu/drm/i915/intel_hdmi.c | 50 ------------------------------- 2 files changed, 100 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 1349d9fd01c4..0ec07e43d6cc 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1289,53 +1289,7 @@ intel_dp_hot_plug(struct intel_output *intel_output) if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON) intel_dp_check_link_status(intel_output); } -/* - * Enumerate the child dev array parsed from VBT to check whether - * the given DP is present. - * If it is present, return 1. - * If it is not present, return false. - * If no child dev is parsed from VBT, it is assumed that the given - * DP is present. - */ -static int dp_is_present_in_vbt(struct drm_device *dev, int dp_reg) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - struct child_device_config *p_child; - int i, dp_port, ret; - if (!dev_priv->child_dev_num) - return 1; - - dp_port = 0; - if (dp_reg == DP_B || dp_reg == PCH_DP_B) - dp_port = PORT_IDPB; - else if (dp_reg == DP_C || dp_reg == PCH_DP_C) - dp_port = PORT_IDPC; - else if (dp_reg == DP_D || dp_reg == PCH_DP_D) - dp_port = PORT_IDPD; - - ret = 0; - for (i = 0; i < dev_priv->child_dev_num; i++) { - p_child = dev_priv->child_dev + i; - /* - * If the device type is not DP, continue. - */ - if (p_child->device_type != DEVICE_TYPE_DP && - p_child->device_type != DEVICE_TYPE_eDP) - continue; - /* Find the eDP port */ - if (dp_reg == DP_A && p_child->device_type == DEVICE_TYPE_eDP) { - ret = 1; - break; - } - /* Find the DP port */ - if (p_child->dvo_port == dp_port) { - ret = 1; - break; - } - } - return ret; -} void intel_dp_init(struct drm_device *dev, int output_reg) { @@ -1345,10 +1299,6 @@ intel_dp_init(struct drm_device *dev, int output_reg) struct intel_dp_priv *dp_priv; const char *name = NULL; - if (!dp_is_present_in_vbt(dev, output_reg)) { - DRM_DEBUG_KMS("DP is not present. Ignore it\n"); - return; - } intel_output = kcalloc(sizeof(struct intel_output) + sizeof(struct intel_dp_priv), 1, GFP_KERNEL); if (!intel_output) diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 06431941b233..0e268deed761 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -225,52 +225,6 @@ static const struct drm_encoder_funcs intel_hdmi_enc_funcs = { .destroy = intel_hdmi_enc_destroy, }; -/* - * Enumerate the child dev array parsed from VBT to check whether - * the given HDMI is present. - * If it is present, return 1. - * If it is not present, return false. - * If no child dev is parsed from VBT, it assumes that the given - * HDMI is present. - */ -static int hdmi_is_present_in_vbt(struct drm_device *dev, int hdmi_reg) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - struct child_device_config *p_child; - int i, hdmi_port, ret; - - if (!dev_priv->child_dev_num) - return 1; - - if (hdmi_reg == SDVOB) - hdmi_port = DVO_B; - else if (hdmi_reg == SDVOC) - hdmi_port = DVO_C; - else if (hdmi_reg == HDMIB) - hdmi_port = DVO_B; - else if (hdmi_reg == HDMIC) - hdmi_port = DVO_C; - else if (hdmi_reg == HDMID) - hdmi_port = DVO_D; - else - return 0; - - ret = 0; - for (i = 0; i < dev_priv->child_dev_num; i++) { - p_child = dev_priv->child_dev + i; - /* - * If the device type is not HDMI, continue. - */ - if (p_child->device_type != DEVICE_TYPE_HDMI) - continue; - /* Find the HDMI port */ - if (p_child->dvo_port == hdmi_port) { - ret = 1; - break; - } - } - return ret; -} void intel_hdmi_init(struct drm_device *dev, int sdvox_reg) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -278,10 +232,6 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg) struct intel_output *intel_output; struct intel_hdmi_priv *hdmi_priv; - if (!hdmi_is_present_in_vbt(dev, sdvox_reg)) { - DRM_DEBUG_KMS("HDMI is not present. Ignored it \n"); - return; - } intel_output = kcalloc(sizeof(struct intel_output) + sizeof(struct intel_hdmi_priv), 1, GFP_KERNEL); if (!intel_output) From 6a304caf0bf9c429fc261f260b86cabf5bde2cbb Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Fri, 8 Jan 2010 10:58:19 +0800 Subject: [PATCH 0764/1626] drm/i915: Read the response after issuing DDC bus switch command For some SDVO cards based on conexant chip, we can't read the EDID if we don't read the response after issuing SDVO DDC bus switch command. From the SDVO spec once when another I2C transaction is finished after completing the I2C transaction of issuing the bus switch command, it will be switched back to the SDVO internal state again. So we can't initiate a new I2C transaction to read the response after issuing the DDC bus switch command. Instead we should issue DDC bus switch command and read the response in the same I2C transaction. https://bugs.freedesktop.org/show_bug.cgi?id=23842 https://bugs.freedesktop.org/show_bug.cgi?id=24458 https://bugs.freedesktop.org/show_bug.cgi?id=24522 https://bugs.freedesktop.org/show_bug.cgi?id=24282 Signed-off-by: Zhao Yakui Tested-by: Sebastien Caty Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_sdvo.c | 57 ++++++++++++++++++++++++++++--- 1 file changed, 53 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index de5144c8c153..f899afd924b4 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -462,14 +462,63 @@ static int intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode) } /** - * Don't check status code from this as it switches the bus back to the - * SDVO chips which defeats the purpose of doing a bus switch in the first - * place. + * Try to read the response after issuie the DDC switch command. But it + * is noted that we must do the action of reading response and issuing DDC + * switch command in one I2C transaction. Otherwise when we try to start + * another I2C transaction after issuing the DDC bus switch, it will be + * switched to the internal SDVO register. */ static void intel_sdvo_set_control_bus_switch(struct intel_output *intel_output, u8 target) { - intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, &target, 1); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u8 out_buf[2], cmd_buf[2], ret_value[2], ret; + struct i2c_msg msgs[] = { + { + .addr = sdvo_priv->slave_addr >> 1, + .flags = 0, + .len = 2, + .buf = out_buf, + }, + /* the following two are to read the response */ + { + .addr = sdvo_priv->slave_addr >> 1, + .flags = 0, + .len = 1, + .buf = cmd_buf, + }, + { + .addr = sdvo_priv->slave_addr >> 1, + .flags = I2C_M_RD, + .len = 1, + .buf = ret_value, + }, + }; + + intel_sdvo_debug_write(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, + &target, 1); + /* write the DDC switch command argument */ + intel_sdvo_write_byte(intel_output, SDVO_I2C_ARG_0, target); + + out_buf[0] = SDVO_I2C_OPCODE; + out_buf[1] = SDVO_CMD_SET_CONTROL_BUS_SWITCH; + cmd_buf[0] = SDVO_I2C_CMD_STATUS; + cmd_buf[1] = 0; + ret_value[0] = 0; + ret_value[1] = 0; + + ret = i2c_transfer(intel_output->i2c_bus, msgs, 3); + if (ret != 3) { + /* failure in I2C transfer */ + DRM_DEBUG_KMS("I2c transfer returned %d\n", ret); + return; + } + if (ret_value[0] != SDVO_CMD_STATUS_SUCCESS) { + DRM_DEBUG_KMS("DDC switch command returns response %d\n", + ret_value[0]); + return; + } + return; } static bool intel_sdvo_set_target_input(struct intel_output *intel_output, bool target_0, bool target_1) From 7c3f0a2726fed78e0e0afe3b6fc3c1f5b298e447 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Fri, 8 Jan 2010 10:58:20 +0800 Subject: [PATCH 0765/1626] drm/i915: try another possible DDC bus for the SDVO device with multiple outputs There exist multiple DDC buses for the SDVO cards with multiple outputs. When we can't get the EDID by using the select DDC bus, we can try the other possible DDC bus to see whether the EDID can be obtained. https://bugs.freedesktop.org/show_bug.cgi?id=23842 Signed-off-by: Zhao Yakui Tested-by: Sebastien Caty Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_sdvo.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index f899afd924b4..eaacfd0920df 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1628,6 +1628,32 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response) edid = drm_get_edid(&intel_output->base, intel_output->ddc_bus); + /* This is only applied to SDVO cards with multiple outputs */ + if (edid == NULL && intel_sdvo_multifunc_encoder(intel_output)) { + uint8_t saved_ddc, temp_ddc; + saved_ddc = sdvo_priv->ddc_bus; + temp_ddc = sdvo_priv->ddc_bus >> 1; + /* + * Don't use the 1 as the argument of DDC bus switch to get + * the EDID. It is used for SDVO SPD ROM. + */ + while(temp_ddc > 1) { + sdvo_priv->ddc_bus = temp_ddc; + edid = drm_get_edid(&intel_output->base, + intel_output->ddc_bus); + if (edid) { + /* + * When we can get the EDID, maybe it is the + * correct DDC bus. Update it. + */ + sdvo_priv->ddc_bus = temp_ddc; + break; + } + temp_ddc >>= 1; + } + if (edid == NULL) + sdvo_priv->ddc_bus = saved_ddc; + } /* when there is no edid and no monitor is connected with VGA * port, try to use the CRT ddc to read the EDID for DVI-connector */ From b9241ea31fae4887104e5d1b3b18f4009c25a0c4 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Wed, 25 Nov 2009 13:09:39 +0800 Subject: [PATCH 0766/1626] drm/i915: Don't wait interruptible for possible plane buffer flush When we setup buffer for display plane, we'll check any pending required GPU flush and possible make interruptible wait for flush complete. But that wait would be most possibly to fail in case of signals received for X process, which will then fail modeset process and put display engine in unconsistent state. The result could be blank screen or CPU hang, and DDX driver would always turn on outputs DPMS after whatever modeset fails or not. So this one creates new helper for setup display plane buffer, and when needing flush using uninterruptible wait for that. This one should fix bug like https://bugs.freedesktop.org/show_bug.cgi?id=24009. Also fixing mode switch stress test on Ironlake. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem.c | 51 ++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_display.c | 2 +- 3 files changed, 53 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 29dd67626967..445c49c6c397 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -864,6 +864,7 @@ int i915_do_wait_request(struct drm_device *dev, uint32_t seqno, int interruptib int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf); int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write); +int i915_gem_object_set_to_display_plane(struct drm_gem_object *obj); int i915_gem_attach_phys_object(struct drm_device *dev, struct drm_gem_object *obj, int id); void i915_gem_detach_phys_object(struct drm_device *dev, diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 2748609f05b3..0f4afa3b03f2 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2837,6 +2837,57 @@ i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write) return 0; } +/* + * Prepare buffer for display plane. Use uninterruptible for possible flush + * wait, as in modesetting process we're not supposed to be interrupted. + */ +int +i915_gem_object_set_to_display_plane(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + uint32_t old_write_domain, old_read_domains; + int ret; + + /* Not valid to be called on unbound objects. */ + if (obj_priv->gtt_space == NULL) + return -EINVAL; + + i915_gem_object_flush_gpu_write_domain(obj); + + /* Wait on any GPU rendering and flushing to occur. */ + if (obj_priv->active) { +#if WATCH_BUF + DRM_INFO("%s: object %p wait for seqno %08x\n", + __func__, obj, obj_priv->last_rendering_seqno); +#endif + ret = i915_do_wait_request(dev, obj_priv->last_rendering_seqno, 0); + if (ret != 0) + return ret; + } + + old_write_domain = obj->write_domain; + old_read_domains = obj->read_domains; + + obj->read_domains &= I915_GEM_DOMAIN_GTT; + + i915_gem_object_flush_cpu_write_domain(obj); + + /* It should now be out of any other write domains, and we can update + * the domain values for our changes. + */ + BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0); + obj->read_domains |= I915_GEM_DOMAIN_GTT; + obj->write_domain = I915_GEM_DOMAIN_GTT; + obj_priv->dirty = 1; + + trace_i915_gem_object_change_domain(obj, + old_read_domains, + old_write_domain); + + return 0; +} + /** * Moves a single object to the CPU read, and possibly write domain. * diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 42e8c031c2ca..4b96a54b8e48 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1207,7 +1207,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return ret; } - ret = i915_gem_object_set_to_gtt_domain(obj, 1); + ret = i915_gem_object_set_to_display_plane(obj); if (ret != 0) { i915_gem_object_unpin(obj); mutex_unlock(&dev->struct_mutex); From 3890ddf56dbc0f804953198e65a7e406ed654576 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 12 Jan 2010 11:16:57 -0500 Subject: [PATCH 0767/1626] drm/radeon/kms: fix up LVDS handling on macs (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Based on radeonfb code and recent ddx fix. v2: minor formatting fix from Michel Dänzer Signed-off-by: Alex Deucher Reviewed-by: Michel Dänzer Tested-by: Michel Dänzer Signed-off-by: Dave Airlie --- .../gpu/drm/radeon/radeon_legacy_encoders.c | 21 ++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 981508ff7037..38e45e231ef5 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -46,6 +46,7 @@ static void radeon_legacy_lvds_dpms(struct drm_encoder *encoder, int mode) struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); uint32_t lvds_gen_cntl, lvds_pll_cntl, pixclks_cntl, disp_pwr_man; int panel_pwr_delay = 2000; + bool is_mac = false; DRM_DEBUG("\n"); if (radeon_encoder->enc_priv) { @@ -58,6 +59,15 @@ static void radeon_legacy_lvds_dpms(struct drm_encoder *encoder, int mode) } } + /* macs (and possibly some x86 oem systems?) wire up LVDS strangely + * Taken from radeonfb. + */ + if ((rdev->mode_info.connector_table == CT_IBOOK) || + (rdev->mode_info.connector_table == CT_POWERBOOK_EXTERNAL) || + (rdev->mode_info.connector_table == CT_POWERBOOK_INTERNAL) || + (rdev->mode_info.connector_table == CT_POWERBOOK_VGA)) + is_mac = true; + switch (mode) { case DRM_MODE_DPMS_ON: disp_pwr_man = RREG32(RADEON_DISP_PWR_MAN); @@ -74,6 +84,8 @@ static void radeon_legacy_lvds_dpms(struct drm_encoder *encoder, int mode) lvds_gen_cntl = RREG32(RADEON_LVDS_GEN_CNTL); lvds_gen_cntl |= (RADEON_LVDS_ON | RADEON_LVDS_EN | RADEON_LVDS_DIGON | RADEON_LVDS_BLON); + if (is_mac) + lvds_gen_cntl |= RADEON_LVDS_BL_MOD_EN; lvds_gen_cntl &= ~(RADEON_LVDS_DISPLAY_DIS); udelay(panel_pwr_delay * 1000); WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl); @@ -85,7 +97,14 @@ static void radeon_legacy_lvds_dpms(struct drm_encoder *encoder, int mode) WREG32_PLL_P(RADEON_PIXCLKS_CNTL, 0, ~RADEON_PIXCLK_LVDS_ALWAYS_ONb); lvds_gen_cntl = RREG32(RADEON_LVDS_GEN_CNTL); lvds_gen_cntl |= RADEON_LVDS_DISPLAY_DIS; - lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_BLON | RADEON_LVDS_EN | RADEON_LVDS_DIGON); + if (is_mac) { + lvds_gen_cntl &= ~RADEON_LVDS_BL_MOD_EN; + WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl); + lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_EN); + } else { + WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl); + lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_BLON | RADEON_LVDS_EN | RADEON_LVDS_DIGON); + } udelay(panel_pwr_delay * 1000); WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl); WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl); From b042589ca038e647fa1e2bb4e7ac3963688479b8 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 11 Jan 2010 19:47:38 -0500 Subject: [PATCH 0768/1626] drm/radeon/kms/r6xx+: make irq handler less verbose Unhandled vectors can be safely ignored, no need to spam the kernel log by default. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 1f4f83d6fbe6..9757962146fb 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2729,7 +2729,7 @@ restart_ih: } break; default: - DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data); + DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data); break; } break; @@ -2749,7 +2749,7 @@ restart_ih: } break; default: - DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data); + DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data); break; } break; @@ -2798,7 +2798,7 @@ restart_ih: } break; default: - DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data); + DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data); break; } break; @@ -2812,7 +2812,7 @@ restart_ih: DRM_DEBUG("IH: CP EOP\n"); break; default: - DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data); + DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data); break; } From 1b24203e51072b6e76aff8c74bdd67eb3b34a724 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 11 Jan 2010 15:02:31 -0500 Subject: [PATCH 0769/1626] drm/radeon/kms/rv100: reject modes > 135 Mhz on DVI (v2) Due to heat issues. Fixes fdo bug 25992 v2: fix typo noticed by Maarten Maathuis Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 9da10dd5df80..55266416fa47 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -900,10 +900,18 @@ static void radeon_dvi_force(struct drm_connector *connector) static int radeon_dvi_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct drm_device *dev = connector->dev; + struct radeon_device *rdev = dev->dev_private; struct radeon_connector *radeon_connector = to_radeon_connector(connector); /* XXX check mode bandwidth */ + /* clocks over 135 MHz have heat issues with DVI on RV100 */ + if (radeon_connector->use_digital && + (rdev->family == CHIP_RV100) && + (mode->clock > 135000)) + return MODE_CLOCK_HIGH; + if (radeon_connector->use_digital && (mode->clock > 165000)) { if ((radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I) || (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D) || From 11f3b59e3654c66c4e8ef2c48f8138b78bf440da Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Mon, 11 Jan 2010 08:58:38 +0100 Subject: [PATCH 0770/1626] drm/radeon/kms: Fix crash getting TV info with no BIOS. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 7914455c96ca..579c8920e081 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -687,6 +687,9 @@ radeon_combios_get_tv_info(struct radeon_device *rdev) uint16_t tv_info; enum radeon_tv_std tv_std = TV_STD_NTSC; + if (rdev->bios == NULL) + return tv_std; + tv_info = combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE); if (tv_info) { if (RBIOS8(tv_info + 6) == 'T') { From 9270eb1b496cb002d75f49ef82c9ef4cbd22a5a0 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 13 Jan 2010 09:21:49 +1000 Subject: [PATCH 0771/1626] drm/radeon/kms: only evict to GTT if CP is ready Testing GTT ready might be more correct but cp.ready works fine and has been tested on irc by 2-3 ppl. fixes bug k.org 15035 and fd.o 25733 Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_ttm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index a00450743d60..db820ae9a034 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -215,7 +215,10 @@ static void radeon_evict_flags(struct ttm_buffer_object *bo, rbo = container_of(bo, struct radeon_bo, tbo); switch (bo->mem.mem_type) { case TTM_PL_VRAM: - radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_GTT); + if (rbo->rdev->cp.ready == false) + radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_CPU); + else + radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_GTT); break; case TTM_PL_TT: default: From 682137f7e6bc78e3c324874c0c213123ddc5e261 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 13 Jan 2010 10:42:05 +1000 Subject: [PATCH 0772/1626] m68knommu: fix definitions of __pa() and __va() Fix compilation breakage of all m68knommu targets: CC arch/m68knommu/kernel/asm-offsets.s In file included from include/linux/sched.h:77, from arch/m68knommu/kernel/asm-offsets.c:12: include/linux/percpu.h: In function 'per_cpu_ptr_to_phys': include/linux/percpu.h:161: error: implicit declaration of function 'virt_to_phy This is broken in linux-2.6.33-rc3. Change the definitions of __pa() and __va() to not use virt_to_phys() and phys_to_virt(). Trivial 1:1 conversion required for the non-MMU case. A side effect if this is that the m68knommu can now use asm/virtconvert.h for the definition of virt_to_phys() and phys_to_virt(). Also cleaned up the definition of page_to_phys() when moving into virtconvert.h. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68k/include/asm/io_no.h | 14 +------------- arch/m68k/include/asm/page_no.h | 4 ++-- arch/m68k/include/asm/virtconvert.h | 4 ++++ 3 files changed, 7 insertions(+), 15 deletions(-) diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h index 7f57436ec18f..359065d5a9f2 100644 --- a/arch/m68k/include/asm/io_no.h +++ b/arch/m68k/include/asm/io_no.h @@ -3,6 +3,7 @@ #ifdef __KERNEL__ +#include /* * These are for ISA/PCI shared memory _only_ and should never be used @@ -165,19 +166,6 @@ static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size extern void iounmap(void *addr); -/* Pages to physical address... */ -#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) -#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) - -/* - * Macros used for converting between virtual and physical mappings. - */ -#define phys_to_virt(vaddr) ((void *) (vaddr)) -#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) - -#define virt_to_bus virt_to_phys -#define bus_to_virt phys_to_virt - /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem * access diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h index 1f31b060cc8d..8029a33e03c3 100644 --- a/arch/m68k/include/asm/page_no.h +++ b/arch/m68k/include/asm/page_no.h @@ -56,8 +56,8 @@ extern unsigned long memory_end; #ifndef __ASSEMBLY__ -#define __pa(vaddr) virt_to_phys((void *)(vaddr)) -#define __va(paddr) phys_to_virt((unsigned long)(paddr)) +#define __pa(vaddr) ((unsigned long)(vaddr)) +#define __va(paddr) ((void *)(paddr)) #define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) #define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) diff --git a/arch/m68k/include/asm/virtconvert.h b/arch/m68k/include/asm/virtconvert.h index 22ab05c9c52b..3f834b3ab5bd 100644 --- a/arch/m68k/include/asm/virtconvert.h +++ b/arch/m68k/include/asm/virtconvert.h @@ -26,6 +26,7 @@ static inline void *phys_to_virt(unsigned long address) } /* Permanent address of a page. */ +#ifdef CONFIG_MMU #ifdef CONFIG_SINGLE_MEMORY_CHUNK #define page_to_phys(page) \ __pa(PAGE_OFFSET + (((page) - pg_data_map[0].node_mem_map) << PAGE_SHIFT)) @@ -37,6 +38,9 @@ static inline void *phys_to_virt(unsigned long address) page_to_pfn(__page) << PAGE_SHIFT; \ }) #endif +#else +#define page_to_phys(page) (((page) - mem_map) << PAGE_SHIFT) +#endif /* * IO bus memory addresses are 1:1 with the physical address, From dbf004d7883b3adb058c0c1a5635bc4ec27651c0 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 12 Jan 2010 16:59:52 -0500 Subject: [PATCH 0773/1626] remove my email address from checkpatch. Maybe this will stop people emailing me about it. Signed-off-by: Dave Jones Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index bc4114f1ab30..3257d3d96767 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -1,5 +1,5 @@ #!/usr/bin/perl -w -# (c) 2001, Dave Jones. (the file handling bit) +# (c) 2001, Dave Jones. (the file handling bit) # (c) 2005, Joel Schopp (the ugly bit) # (c) 2007,2008, Andy Whitcroft (new conditions, test suite) # (c) 2008,2009, Andy Whitcroft From 2c761270d5520dd84ab0b4e47c24d99ff8503c38 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 12 Jan 2010 17:39:16 +1100 Subject: [PATCH 0774/1626] lib: Introduce generic list_sort function There are two copies of list_sort() in the tree already, one in the DRM code, another in ubifs. Now XFS needs this as well. Create a generic list_sort() function from the ubifs version and convert existing users to it so we don't end up with yet another copy in the tree. Signed-off-by: Dave Chinner Acked-by: Dave Airlie Acked-by: Artem Bityutskiy Signed-off-by: Linus Torvalds --- drivers/gpu/drm/drm_modes.c | 90 ++----------------------------- fs/ubifs/gc.c | 96 +-------------------------------- include/linux/list_sort.h | 11 ++++ lib/Makefile | 2 +- lib/list_sort.c | 102 ++++++++++++++++++++++++++++++++++++ 5 files changed, 119 insertions(+), 182 deletions(-) create mode 100644 include/linux/list_sort.h create mode 100644 lib/list_sort.c diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 6d81a02463a3..76d63394c776 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -1,9 +1,4 @@ /* - * The list_sort function is (presumably) licensed under the GPL (see the - * top level "COPYING" file for details). - * - * The remainder of this file is: - * * Copyright © 1997-2003 by The XFree86 Project, Inc. * Copyright © 2007 Dave Airlie * Copyright © 2007-2008 Intel Corporation @@ -36,6 +31,7 @@ */ #include +#include #include "drmP.h" #include "drm.h" #include "drm_crtc.h" @@ -855,6 +851,7 @@ EXPORT_SYMBOL(drm_mode_prune_invalid); /** * drm_mode_compare - compare modes for favorability + * @priv: unused * @lh_a: list_head for first mode * @lh_b: list_head for second mode * @@ -868,7 +865,7 @@ EXPORT_SYMBOL(drm_mode_prune_invalid); * Negative if @lh_a is better than @lh_b, zero if they're equivalent, or * positive if @lh_b is better than @lh_a. */ -static int drm_mode_compare(struct list_head *lh_a, struct list_head *lh_b) +static int drm_mode_compare(void *priv, struct list_head *lh_a, struct list_head *lh_b) { struct drm_display_mode *a = list_entry(lh_a, struct drm_display_mode, head); struct drm_display_mode *b = list_entry(lh_b, struct drm_display_mode, head); @@ -885,85 +882,6 @@ static int drm_mode_compare(struct list_head *lh_a, struct list_head *lh_b) return diff; } -/* FIXME: what we don't have a list sort function? */ -/* list sort from Mark J Roberts (mjr@znex.org) */ -void list_sort(struct list_head *head, - int (*cmp)(struct list_head *a, struct list_head *b)) -{ - struct list_head *p, *q, *e, *list, *tail, *oldhead; - int insize, nmerges, psize, qsize, i; - - list = head->next; - list_del(head); - insize = 1; - for (;;) { - p = oldhead = list; - list = tail = NULL; - nmerges = 0; - - while (p) { - nmerges++; - q = p; - psize = 0; - for (i = 0; i < insize; i++) { - psize++; - q = q->next == oldhead ? NULL : q->next; - if (!q) - break; - } - - qsize = insize; - while (psize > 0 || (qsize > 0 && q)) { - if (!psize) { - e = q; - q = q->next; - qsize--; - if (q == oldhead) - q = NULL; - } else if (!qsize || !q) { - e = p; - p = p->next; - psize--; - if (p == oldhead) - p = NULL; - } else if (cmp(p, q) <= 0) { - e = p; - p = p->next; - psize--; - if (p == oldhead) - p = NULL; - } else { - e = q; - q = q->next; - qsize--; - if (q == oldhead) - q = NULL; - } - if (tail) - tail->next = e; - else - list = e; - e->prev = tail; - tail = e; - } - p = q; - } - - tail->next = list; - list->prev = tail; - - if (nmerges <= 1) - break; - - insize *= 2; - } - - head->next = list; - head->prev = list->prev; - list->prev->next = head; - list->prev = head; -} - /** * drm_mode_sort - sort mode list * @mode_list: list to sort @@ -975,7 +893,7 @@ void list_sort(struct list_head *head, */ void drm_mode_sort(struct list_head *mode_list) { - list_sort(mode_list, drm_mode_compare); + list_sort(NULL, mode_list, drm_mode_compare); } EXPORT_SYMBOL(drm_mode_sort); diff --git a/fs/ubifs/gc.c b/fs/ubifs/gc.c index 618c2701d3a7..e5a3d8e96bb7 100644 --- a/fs/ubifs/gc.c +++ b/fs/ubifs/gc.c @@ -54,6 +54,7 @@ */ #include +#include #include "ubifs.h" /* @@ -107,101 +108,6 @@ static int switch_gc_head(struct ubifs_info *c) return err; } -/** - * list_sort - sort a list. - * @priv: private data, passed to @cmp - * @head: the list to sort - * @cmp: the elements comparison function - * - * This function has been implemented by Mark J Roberts . It - * implements "merge sort" which has O(nlog(n)) complexity. The list is sorted - * in ascending order. - * - * The comparison function @cmp is supposed to return a negative value if @a is - * than @b, and a positive value if @a is greater than @b. If @a and @b are - * equivalent, then it does not matter what this function returns. - */ -static void list_sort(void *priv, struct list_head *head, - int (*cmp)(void *priv, struct list_head *a, - struct list_head *b)) -{ - struct list_head *p, *q, *e, *list, *tail, *oldhead; - int insize, nmerges, psize, qsize, i; - - if (list_empty(head)) - return; - - list = head->next; - list_del(head); - insize = 1; - for (;;) { - p = oldhead = list; - list = tail = NULL; - nmerges = 0; - - while (p) { - nmerges++; - q = p; - psize = 0; - for (i = 0; i < insize; i++) { - psize++; - q = q->next == oldhead ? NULL : q->next; - if (!q) - break; - } - - qsize = insize; - while (psize > 0 || (qsize > 0 && q)) { - if (!psize) { - e = q; - q = q->next; - qsize--; - if (q == oldhead) - q = NULL; - } else if (!qsize || !q) { - e = p; - p = p->next; - psize--; - if (p == oldhead) - p = NULL; - } else if (cmp(priv, p, q) <= 0) { - e = p; - p = p->next; - psize--; - if (p == oldhead) - p = NULL; - } else { - e = q; - q = q->next; - qsize--; - if (q == oldhead) - q = NULL; - } - if (tail) - tail->next = e; - else - list = e; - e->prev = tail; - tail = e; - } - p = q; - } - - tail->next = list; - list->prev = tail; - - if (nmerges <= 1) - break; - - insize *= 2; - } - - head->next = list; - head->prev = list->prev; - list->prev->next = head; - list->prev = head; -} - /** * data_nodes_cmp - compare 2 data nodes. * @priv: UBIFS file-system description object diff --git a/include/linux/list_sort.h b/include/linux/list_sort.h new file mode 100644 index 000000000000..1a2df2efb771 --- /dev/null +++ b/include/linux/list_sort.h @@ -0,0 +1,11 @@ +#ifndef _LINUX_LIST_SORT_H +#define _LINUX_LIST_SORT_H + +#include + +struct list_head; + +void list_sort(void *priv, struct list_head *head, + int (*cmp)(void *priv, struct list_head *a, + struct list_head *b)); +#endif diff --git a/lib/Makefile b/lib/Makefile index 911b25aed1e7..3b0b4a696db9 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -21,7 +21,7 @@ lib-y += kobject.o kref.o klist.o obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \ bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \ - string_helpers.o gcd.o + string_helpers.o gcd.o list_sort.o ifeq ($(CONFIG_DEBUG_KOBJECT),y) CFLAGS_kobject.o += -DDEBUG diff --git a/lib/list_sort.c b/lib/list_sort.c new file mode 100644 index 000000000000..19d11e0bb958 --- /dev/null +++ b/lib/list_sort.c @@ -0,0 +1,102 @@ +#include +#include +#include +#include +#include + +/** + * list_sort - sort a list. + * @priv: private data, passed to @cmp + * @head: the list to sort + * @cmp: the elements comparison function + * + * This function has been implemented by Mark J Roberts . It + * implements "merge sort" which has O(nlog(n)) complexity. The list is sorted + * in ascending order. + * + * The comparison function @cmp is supposed to return a negative value if @a is + * less than @b, and a positive value if @a is greater than @b. If @a and @b + * are equivalent, then it does not matter what this function returns. + */ +void list_sort(void *priv, struct list_head *head, + int (*cmp)(void *priv, struct list_head *a, + struct list_head *b)) +{ + struct list_head *p, *q, *e, *list, *tail, *oldhead; + int insize, nmerges, psize, qsize, i; + + if (list_empty(head)) + return; + + list = head->next; + list_del(head); + insize = 1; + for (;;) { + p = oldhead = list; + list = tail = NULL; + nmerges = 0; + + while (p) { + nmerges++; + q = p; + psize = 0; + for (i = 0; i < insize; i++) { + psize++; + q = q->next == oldhead ? NULL : q->next; + if (!q) + break; + } + + qsize = insize; + while (psize > 0 || (qsize > 0 && q)) { + if (!psize) { + e = q; + q = q->next; + qsize--; + if (q == oldhead) + q = NULL; + } else if (!qsize || !q) { + e = p; + p = p->next; + psize--; + if (p == oldhead) + p = NULL; + } else if (cmp(priv, p, q) <= 0) { + e = p; + p = p->next; + psize--; + if (p == oldhead) + p = NULL; + } else { + e = q; + q = q->next; + qsize--; + if (q == oldhead) + q = NULL; + } + if (tail) + tail->next = e; + else + list = e; + e->prev = tail; + tail = e; + } + p = q; + } + + tail->next = list; + list->prev = tail; + + if (nmerges <= 1) + break; + + insize *= 2; + } + + head->next = list; + head->prev = list->prev; + list->prev->next = head; + list->prev = head; +} + +EXPORT_SYMBOL(list_sort); From bb7d3f24c71e528989501617651b669fbed798cb Mon Sep 17 00:00:00 2001 From: "Bryn M. Reeves" Date: Thu, 12 Nov 2009 18:31:54 +0000 Subject: [PATCH 0775/1626] [SCSI] megaraid_sas: remove sysfs poll_mode_io world writeable permissions /sys/bus/pci/drivers/megaraid_sas/poll_mode_io defaults to being world-writable, which seems bad (letting any user affect kernel driver behavior). This turns off group and user write permissions, so that on typical production systems only root can write to it. Signed-off-by: Bryn M. Reeves Signed-off-by: Linus Torvalds --- drivers/scsi/megaraid/megaraid_sas.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 99ff99e45bee..708ea3157b60 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -4046,7 +4046,7 @@ megasas_aen_polling(struct work_struct *work) } -static DRIVER_ATTR(poll_mode_io, S_IRUGO|S_IWUGO, +static DRIVER_ATTR(poll_mode_io, S_IRUGO|S_IWUSR, megasas_sysfs_show_poll_mode_io, megasas_sysfs_set_poll_mode_io); From 7284ce6c9f6153d1777df5f310c959724d1bd446 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 12 Jan 2010 21:15:00 -0800 Subject: [PATCH 0776/1626] Linux 2.6.33-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 12310947156e..9f64552f09d6 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 33 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* From 70a94d6a35072b62f808155f117f00485a395f03 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 13 Jan 2010 16:15:11 +1000 Subject: [PATCH 0777/1626] drm: fix crtc no modes printf + typo MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Toralf Förster pointed out the typo, the fact I forget the if statement is purely personal fail. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 077313f0d47f..1c47ea25337c 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -1032,7 +1032,8 @@ bool drm_helper_initial_config(struct drm_device *dev) /* * we shouldn't end up with no modes here. */ - printk(KERN_INFO "No connectors reported conncted with modes\n"); + if (count == 0) + printk(KERN_INFO "No connectors reported connected with modes\n"); drm_setup_crtcs(dev); From ef14587706521287f1c7ea3326e732f7d86dd096 Mon Sep 17 00:00:00 2001 From: Dave Young Date: Wed, 13 Jan 2010 13:38:59 +0800 Subject: [PATCH 0778/1626] drm: change drm set mode messages as DRM_DEBUG Following drm info repeat 207 times during one hour, it's quite annoying [ 1266.286747] [drm] TV-19: set mode NTSC 480i 0 Change from DRM_INFO to DRM_DEBUG Signed-off-by: Dave Young Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 1c47ea25337c..7d0f00a935fa 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -702,7 +702,7 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, if (encoder->crtc != crtc) continue; - DRM_INFO("%s: set mode %s %x\n", drm_get_encoder_name(encoder), + DRM_DEBUG("%s: set mode %s %x\n", drm_get_encoder_name(encoder), mode->name, mode->base.id); encoder_funcs = encoder->helper_private; encoder_funcs->mode_set(encoder, mode, adjusted_mode); From 7485d0d3758e8e6491a5c9468114e74dc050785d Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Tue, 5 Jan 2010 16:32:43 +0900 Subject: [PATCH 0779/1626] futexes: Remove rw parameter from get_futex_key() Currently, futexes have two problem: A) The current futex code doesn't handle private file mappings properly. get_futex_key() uses PageAnon() to distinguish file and anon, which can cause the following bad scenario: 1) thread-A call futex(private-mapping, FUTEX_WAIT), it sleeps on file mapping object. 2) thread-B writes a variable and it makes it cow. 3) thread-B calls futex(private-mapping, FUTEX_WAKE), it wakes up blocked thread on the anonymous page. (but it's nothing) B) Current futex code doesn't handle zero page properly. Read mode get_user_pages() can return zero page, but current futex code doesn't handle it at all. Then, zero page makes infinite loop internally. The solution is to use write mode get_user_page() always for page lookup. It prevents the lookup of both file page of private mappings and zero page. Performance concerns: Probaly very little, because glibc always initialize variables for futex before to call futex(). It means glibc users never see the overhead of this patch. Compatibility concerns: This patch has few compatibility issues. After this patch, FUTEX_WAIT require writable access to futex variables (read-only mappings makes EFAULT). But practically it's not a problem, glibc always initalizes variables for futexes explicitly - nobody uses read-only mappings. Reported-by: Hugh Dickins Signed-off-by: KOSAKI Motohiro Acked-by: Peter Zijlstra Acked-by: Darren Hart Cc: Cc: Linus Torvalds Cc: KAMEZAWA Hiroyuki Cc: Nick Piggin Cc: Ulrich Drepper LKML-Reference: <20100105162633.45A2.A69D9226@jp.fujitsu.com> Signed-off-by: Ingo Molnar --- kernel/futex.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-) diff --git a/kernel/futex.c b/kernel/futex.c index 8e3c3ffe1b9a..d9b3a2228f9d 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -203,8 +203,6 @@ static void drop_futex_key_refs(union futex_key *key) * @uaddr: virtual address of the futex * @fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED * @key: address where result is stored. - * @rw: mapping needs to be read/write (values: VERIFY_READ, - * VERIFY_WRITE) * * Returns a negative error code or 0 * The key words are stored in *key on success. @@ -216,7 +214,7 @@ static void drop_futex_key_refs(union futex_key *key) * lock_page() might sleep, the caller should not hold a spinlock. */ static int -get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw) +get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key) { unsigned long address = (unsigned long)uaddr; struct mm_struct *mm = current->mm; @@ -239,7 +237,7 @@ get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw) * but access_ok() should be faster than find_vma() */ if (!fshared) { - if (unlikely(!access_ok(rw, uaddr, sizeof(u32)))) + if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))) return -EFAULT; key->private.mm = mm; key->private.address = address; @@ -248,7 +246,7 @@ get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw) } again: - err = get_user_pages_fast(address, 1, rw == VERIFY_WRITE, &page); + err = get_user_pages_fast(address, 1, 1, &page); if (err < 0) return err; @@ -867,7 +865,7 @@ static int futex_wake(u32 __user *uaddr, int fshared, int nr_wake, u32 bitset) if (!bitset) return -EINVAL; - ret = get_futex_key(uaddr, fshared, &key, VERIFY_READ); + ret = get_futex_key(uaddr, fshared, &key); if (unlikely(ret != 0)) goto out; @@ -913,10 +911,10 @@ futex_wake_op(u32 __user *uaddr1, int fshared, u32 __user *uaddr2, int ret, op_ret; retry: - ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ); + ret = get_futex_key(uaddr1, fshared, &key1); if (unlikely(ret != 0)) goto out; - ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE); + ret = get_futex_key(uaddr2, fshared, &key2); if (unlikely(ret != 0)) goto out_put_key1; @@ -1175,11 +1173,10 @@ retry: pi_state = NULL; } - ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ); + ret = get_futex_key(uaddr1, fshared, &key1); if (unlikely(ret != 0)) goto out; - ret = get_futex_key(uaddr2, fshared, &key2, - requeue_pi ? VERIFY_WRITE : VERIFY_READ); + ret = get_futex_key(uaddr2, fshared, &key2); if (unlikely(ret != 0)) goto out_put_key1; @@ -1738,7 +1735,7 @@ static int futex_wait_setup(u32 __user *uaddr, u32 val, int fshared, */ retry: q->key = FUTEX_KEY_INIT; - ret = get_futex_key(uaddr, fshared, &q->key, VERIFY_READ); + ret = get_futex_key(uaddr, fshared, &q->key); if (unlikely(ret != 0)) return ret; @@ -1904,7 +1901,7 @@ static int futex_lock_pi(u32 __user *uaddr, int fshared, q.requeue_pi_key = NULL; retry: q.key = FUTEX_KEY_INIT; - ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_WRITE); + ret = get_futex_key(uaddr, fshared, &q.key); if (unlikely(ret != 0)) goto out; @@ -2023,7 +2020,7 @@ retry: if ((uval & FUTEX_TID_MASK) != task_pid_vnr(current)) return -EPERM; - ret = get_futex_key(uaddr, fshared, &key, VERIFY_WRITE); + ret = get_futex_key(uaddr, fshared, &key); if (unlikely(ret != 0)) goto out; @@ -2215,7 +2212,7 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared, rt_waiter.task = NULL; key2 = FUTEX_KEY_INIT; - ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE); + ret = get_futex_key(uaddr2, fshared, &key2); if (unlikely(ret != 0)) goto out; From 4a18b3ab6ed537b055e3fcfca64ab870b4f9acf0 Mon Sep 17 00:00:00 2001 From: Tai-hwa Liang Date: Wed, 13 Jan 2010 00:16:27 -0800 Subject: [PATCH 0780/1626] Input: pmouse - move Sentelic probe down the list Sentelic probes confuse IBM trackpoints so they stop responding to TP_READ_ID command. See: http://bugzilla.kernel.org/show_bug.cgi?id=14970 Let's move FSP detection lower so it is probed after trackpoint and others, just before we strat probing for Intellimouse Explorer. Signed-off-by: Tai-hwa Liang Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/psmouse-base.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index cabf4e1caacc..9774bdfaa482 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -690,19 +690,6 @@ static int psmouse_extensions(struct psmouse *psmouse, max_proto = PSMOUSE_IMEX; } -/* - * Try Finger Sensing Pad - */ - if (max_proto > PSMOUSE_IMEX) { - if (fsp_detect(psmouse, set_properties) == 0) { - if (!set_properties || fsp_init(psmouse) == 0) - return PSMOUSE_FSP; -/* - * Init failed, try basic relative protocols - */ - max_proto = PSMOUSE_IMEX; - } - } if (max_proto > PSMOUSE_IMEX) { if (genius_detect(psmouse, set_properties) == 0) @@ -718,6 +705,21 @@ static int psmouse_extensions(struct psmouse *psmouse, return PSMOUSE_TOUCHKIT_PS2; } +/* + * Try Finger Sensing Pad. We do it here because its probe upsets + * Trackpoint devices (causing TP_READ_ID command to time out). + */ + if (max_proto > PSMOUSE_IMEX) { + if (fsp_detect(psmouse, set_properties) == 0) { + if (!set_properties || fsp_init(psmouse) == 0) + return PSMOUSE_FSP; +/* + * Init failed, try basic relative protocols + */ + max_proto = PSMOUSE_IMEX; + } + } + /* * Reset to defaults in case the device got confused by extended * protocol probes. Note that we follow up with full reset because From c332e9fcc5289698350d39d4d22c3ed5257d7a80 Mon Sep 17 00:00:00 2001 From: Tai-hwa Liang Date: Wed, 13 Jan 2010 00:25:35 -0800 Subject: [PATCH 0781/1626] Input: sentelic - fix left/right horizontal scroll mapping Signed-off-by: Tai-hwa Liang Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/sentelic.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 77b9fd0b3fbf..81a6b81cb2fe 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -2,7 +2,7 @@ * Finger Sensing Pad PS/2 mouse driver. * * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. - * Copyright (C) 2005-2009 Tai-hwa Liang, Sentelic Corporation. + * Copyright (C) 2005-2010 Tai-hwa Liang, Sentelic Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -658,9 +658,9 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) if (packet[3] & BIT(1)) button_status |= 0x0f; /* wheel up */ if (packet[3] & BIT(2)) - button_status |= BIT(5);/* horizontal left */ + button_status |= BIT(4);/* horizontal left */ if (packet[3] & BIT(3)) - button_status |= BIT(4);/* horizontal right */ + button_status |= BIT(5);/* horizontal right */ /* push back to packet queue */ if (button_status != 0) packet[3] = button_status; From c2c5d45d46c8c0fd34291dec958670ad4816796f Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 31 Dec 2009 03:52:25 +0100 Subject: [PATCH 0782/1626] perf: Stop stack frame walking off kernel addresses boundaries While processing kernel perf callchains, an bad entry can be considered as a valid stack pointer but not as a kernel address. In this case, we hang in an endless loop. This can happen in an x86-32 kernel after processing the last entry in a kernel stacktrace. Just stop the stack frame walking after we encounter an invalid kernel address. This fixes a hard lockup in x86-32. Signed-off-by: Frederic Weisbecker Cc: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras LKML-Reference: <1262227945-27014-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/dumpstack.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index c56bc2873030..6d817554780a 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -123,13 +123,15 @@ print_context_stack_bp(struct thread_info *tinfo, while (valid_stack_ptr(tinfo, ret_addr, sizeof(*ret_addr), end)) { unsigned long addr = *ret_addr; - if (__kernel_text_address(addr)) { - ops->address(data, addr, 1); - frame = frame->next_frame; - ret_addr = &frame->return_address; - print_ftrace_graph_addr(addr, data, ops, tinfo, graph); - } + if (!__kernel_text_address(addr)) + break; + + ops->address(data, addr, 1); + frame = frame->next_frame; + ret_addr = &frame->return_address; + print_ftrace_graph_addr(addr, data, ops, tinfo, graph); } + return (unsigned long)frame; } EXPORT_SYMBOL_GPL(print_context_stack_bp); From f6a8c60960bbea378142d1fa1b3d111555ee41c7 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Sun, 29 Nov 2009 15:23:51 +0000 Subject: [PATCH 0783/1626] mtd: Really add ARM pismo support (Commit 7cb777a3d71f9d1f7eb149c7a504d21f24219ae8 (mtd: add ARM pismo support) intended to add this, but seems only to have patched the Makefile without touching Kconfig or providing any code...) The following patch adds support for PISMO modules found on ARM Ltd development platforms. These are MTD modules, and can have a selection of SRAM, flash or DOC devices as described by an on-board I2C EEPROM. We support SRAM and NOR flash devices only by registering appropriate conventional MTD platform devices as children of the 'pismo' device. Signed-off-by: Russell King Signed-off-by: David Woodhouse --- drivers/mtd/maps/Kconfig | 17 ++ drivers/mtd/maps/pismo.c | 320 ++++++++++++++++++++++++++++++++++++++ include/linux/mtd/pismo.h | 17 ++ 3 files changed, 354 insertions(+) create mode 100644 drivers/mtd/maps/pismo.c create mode 100644 include/linux/mtd/pismo.h diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 4c364d44ad59..2de0cc823d60 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -549,4 +549,21 @@ config MTD_VMU To build this as a module select M here, the module will be called vmu-flash. +config MTD_PISMO + tristate "MTD discovery driver for PISMO modules" + depends on I2C + depends on ARCH_VERSATILE + help + This driver allows for discovery of PISMO modules - see + . These are small modules containing + up to five memory devices (eg, SRAM, flash, DOC) described by an + I2C EEPROM. + + This driver does not create any MTD maps itself; instead it + creates MTD physmap and MTD SRAM platform devices. If you + enable this option, you should consider enabling MTD_PHYSMAP + and/or MTD_PLATRAM according to the devices on your module. + + When built as a module, it will be called pismo.ko + endmenu diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c new file mode 100644 index 000000000000..c48cad271f5d --- /dev/null +++ b/drivers/mtd/maps/pismo.c @@ -0,0 +1,320 @@ +/* + * PISMO memory driver - http://www.pismoworld.org/ + * + * For ARM Realview and Versatile platforms + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PISMO_NUM_CS 5 + +struct pismo_cs_block { + u8 type; + u8 width; + __le16 access; + __le32 size; + u32 reserved[2]; + char device[32]; +} __packed; + +struct pismo_eeprom { + struct pismo_cs_block cs[PISMO_NUM_CS]; + char board[15]; + u8 sum; +} __packed; + +struct pismo_mem { + phys_addr_t base; + u32 size; + u16 access; + u8 width; + u8 type; +}; + +struct pismo_data { + struct i2c_client *client; + void (*vpp)(void *, int); + void *vpp_data; + struct platform_device *dev[PISMO_NUM_CS]; +}; + +/* FIXME: set_vpp could do with a better calling convention */ +static struct pismo_data *vpp_pismo; +static DEFINE_MUTEX(pismo_mutex); + +static int pismo_setvpp_probe_fix(struct pismo_data *pismo) +{ + mutex_lock(&pismo_mutex); + if (vpp_pismo) { + mutex_unlock(&pismo_mutex); + kfree(pismo); + return -EBUSY; + } + vpp_pismo = pismo; + mutex_unlock(&pismo_mutex); + return 0; +} + +static void pismo_setvpp_remove_fix(struct pismo_data *pismo) +{ + mutex_lock(&pismo_mutex); + if (vpp_pismo == pismo) + vpp_pismo = NULL; + mutex_unlock(&pismo_mutex); +} + +static void pismo_set_vpp(struct map_info *map, int on) +{ + struct pismo_data *pismo = vpp_pismo; + + pismo->vpp(pismo->vpp_data, on); +} +/* end of hack */ + + +static unsigned int __devinit pismo_width_to_bytes(unsigned int width) +{ + width &= 15; + if (width > 2) + return 0; + return 1 << width; +} + +static int __devinit pismo_eeprom_read(struct i2c_client *client, void *buf, + u8 addr, size_t size) +{ + int ret; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .len = sizeof(addr), + .buf = &addr, + }, { + .addr = client->addr, + .flags = I2C_M_RD, + .len = size, + .buf = buf, + }, + }; + + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + + return ret == ARRAY_SIZE(msg) ? size : -EIO; +} + +static int __devinit pismo_add_device(struct pismo_data *pismo, int i, + struct pismo_mem *region, const char *name, void *pdata, size_t psize) +{ + struct platform_device *dev; + struct resource res = { }; + phys_addr_t base = region.base; + int ret; + + if (base == ~0) + return -ENXIO; + + res.start = base; + res.end = base + region->size - 1; + res.flags = IORESOURCE_MEM; + + dev = platform_device_alloc(name, i); + if (!dev) + return -ENOMEM; + dev->dev.parent = &pismo->client->dev; + + do { + ret = platform_device_add_resources(dev, &res, 1); + if (ret) + break; + + ret = platform_device_add_data(dev, pdata, psize); + if (ret) + break; + + ret = platform_device_add(dev); + if (ret) + break; + + pismo->dev[i] = dev; + return 0; + } while (0); + + platform_device_put(dev); + return ret; +} + +static int __devinit pismo_add_nor(struct pismo_data *pismo, int i, + struct pismo_mem *region) +{ + struct physmap_flash_data data = { + .width = region->width, + }; + + if (pismo->vpp) + data.set_vpp = pismo_set_vpp; + + return pismo_add_device(pismo, i, region, "physmap-flash", + &data, sizeof(data)); +} + +static int __devinit pismo_add_sram(struct pismo_data *pismo, int i, + struct pismo_mem *region) +{ + struct platdata_mtd_ram data = { + .bankwidth = region->width, + }; + + return pismo_add_device(pismo, i, region, "mtd-ram", + &data, sizeof(data)); +} + +static void __devinit pismo_add_one(struct pismo_data *pismo, int i, + const struct pismo_cs_block *cs, phys_addr_t base) +{ + struct device *dev = &pismo->client->dev; + struct pismo_mem region; + + region.base = base; + region.type = cs->type; + region.width = pismo_width_to_bytes(cs->width); + region.access = le16_to_cpu(cs->access); + region.size = le32_to_cpu(cs->size); + + if (region.width == 0) { + dev_err(dev, "cs%u: bad width: %02x, ignoring\n", i, cs->width); + return; + } + + /* + * FIXME: may need to the platforms memory controller here, but at + * the moment we assume that it has already been correctly setup. + * The memory controller can also tell us the base address as well. + */ + + dev_info(dev, "cs%u: %.32s: type %02x access %u00ps size %uK\n", + i, cs->device, region.type, region.access, region.size / 1024); + + switch (region.type) { + case 0: + break; + case 1: + /* static DOC */ + break; + case 2: + /* static NOR */ + pismo_add_nor(pismo, i, ®ion); + break; + case 3: + /* static RAM */ + pismo_add_sram(pismo, i, ®ion); + break; + } +} + +static int __devexit pismo_remove(struct i2c_client *client) +{ + struct pismo_data *pismo = i2c_get_clientdata(client); + int i; + + for (i = 0; i < ARRAY_SIZE(pismo->dev); i++) + platform_device_unregister(pismo->dev[i]); + + /* FIXME: set_vpp needs saner arguments */ + pismo_setvpp_remove_fix(pismo); + + kfree(pismo); + + return 0; +} + +static int __devinit pismo_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct pismo_pdata *pdata = client->dev.platform_data; + struct pismo_eeprom eeprom; + struct pismo_data *pismo; + int ret, i; + + if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "functionality mismatch\n"); + return -EIO; + } + + pismo = kzalloc(sizeof(*pismo), GFP_KERNEL); + if (!pismo) + return -ENOMEM; + + /* FIXME: set_vpp needs saner arguments */ + ret = pismo_setvpp_probe_fix(pismo); + if (ret) + return ret; + + pismo->client = client; + if (pdata) { + pismo->vpp = pdata->set_vpp; + pismo->vpp_data = pdata->vpp_data; + } + i2c_set_clientdata(client, pismo); + + ret = pismo_eeprom_read(client, &eeprom, 0, sizeof(eeprom)); + if (ret < 0) { + dev_err(&client->dev, "error reading EEPROM: %d\n", ret); + return ret; + } + + dev_info(&client->dev, "%.15s board found\n", eeprom.board); + + for (i = 0; i < ARRAY_SIZE(eeprom.cs); i++) + if (eeprom.cs[i].type != 0xff) + pismo_add_one(pismo, i, &eeprom.cs[i], + pdata->cs_addrs[i]); + + return 0; +} + +static const struct i2c_device_id pismo_id[] = { + { "pismo" }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, pismo_id); + +static struct i2c_driver pismo_driver = { + .driver = { + .name = "pismo", + .owner = THIS_MODULE, + }, + .probe = pismo_probe, + .remove = __devexit_p(pismo_remove), + .id_table = pismo_id, +}; + +static int __init pismo_init(void) +{ + BUILD_BUG_ON(sizeof(struct pismo_cs_block) != 48); + BUILD_BUG_ON(sizeof(struct pismo_eeprom) != 256); + + return i2c_add_driver(&pismo_driver); +} +module_init(pismo_init); + +static void __exit pismo_exit(void) +{ + i2c_del_driver(&pismo_driver); +} +module_exit(pismo_exit); + +MODULE_AUTHOR("Russell King "); +MODULE_DESCRIPTION("PISMO memory driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mtd/pismo.h b/include/linux/mtd/pismo.h new file mode 100644 index 000000000000..8dfb7e1421c5 --- /dev/null +++ b/include/linux/mtd/pismo.h @@ -0,0 +1,17 @@ +/* + * PISMO memory driver - http://www.pismoworld.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#ifndef __LINUX_MTD_PISMO_H +#define __LINUX_MTD_PISMO_H + +struct pismo_pdata { + void (*set_vpp)(void *, int); + void *vpp_data; + phys_addr_t cs_addrs[5]; +}; + +#endif From f5e2bae0aad03164ffc7ce9dfeee6608e2c87dba Mon Sep 17 00:00:00 2001 From: Morten Thunberg Svendsen Date: Wed, 6 Jan 2010 10:48:18 +0100 Subject: [PATCH 0784/1626] mtd: tests: fix read, speed and stress tests on NOR flash Before using block_isbad() check if mtd->block_isbad() is defined. Calculating pgcnt must be done using pgsize defined to 512 on NOR and mtd->writesize for NAND, not using mtd->writesize directly. Signed-off-by: Morten Thunberg Svendsen Acked-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/tests/mtd_readtest.c | 6 +++++- drivers/mtd/tests/mtd_speedtest.c | 7 ++++++- drivers/mtd/tests/mtd_stresstest.c | 6 +++++- 3 files changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/tests/mtd_readtest.c b/drivers/mtd/tests/mtd_readtest.c index 79fc4530987b..25c5dd03a837 100644 --- a/drivers/mtd/tests/mtd_readtest.c +++ b/drivers/mtd/tests/mtd_readtest.c @@ -147,6 +147,10 @@ static int scan_for_bad_eraseblocks(void) } memset(bbt, 0 , ebcnt); + /* NOR flash does not implement block_isbad */ + if (mtd->block_isbad == NULL) + return 0; + printk(PRINT_PREF "scanning for bad eraseblocks\n"); for (i = 0; i < ebcnt; ++i) { bbt[i] = is_block_bad(i) ? 1 : 0; @@ -184,7 +188,7 @@ static int __init mtd_readtest_init(void) tmp = mtd->size; do_div(tmp, mtd->erasesize); ebcnt = tmp; - pgcnt = mtd->erasesize / mtd->writesize; + pgcnt = mtd->erasesize / pgsize; printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, " "page size %u, count of eraseblocks %u, pages per " diff --git a/drivers/mtd/tests/mtd_speedtest.c b/drivers/mtd/tests/mtd_speedtest.c index 141363a7e805..7fbb51d4eabe 100644 --- a/drivers/mtd/tests/mtd_speedtest.c +++ b/drivers/mtd/tests/mtd_speedtest.c @@ -301,6 +301,10 @@ static int scan_for_bad_eraseblocks(void) } memset(bbt, 0 , ebcnt); + /* NOR flash does not implement block_isbad */ + if (mtd->block_isbad == NULL) + goto out; + printk(PRINT_PREF "scanning for bad eraseblocks\n"); for (i = 0; i < ebcnt; ++i) { bbt[i] = is_block_bad(i) ? 1 : 0; @@ -309,6 +313,7 @@ static int scan_for_bad_eraseblocks(void) cond_resched(); } printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad); +out: goodebcnt = ebcnt - bad; return 0; } @@ -340,7 +345,7 @@ static int __init mtd_speedtest_init(void) tmp = mtd->size; do_div(tmp, mtd->erasesize); ebcnt = tmp; - pgcnt = mtd->erasesize / mtd->writesize; + pgcnt = mtd->erasesize / pgsize; printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, " "page size %u, count of eraseblocks %u, pages per " diff --git a/drivers/mtd/tests/mtd_stresstest.c b/drivers/mtd/tests/mtd_stresstest.c index 63920476b57a..a99d3cd737d8 100644 --- a/drivers/mtd/tests/mtd_stresstest.c +++ b/drivers/mtd/tests/mtd_stresstest.c @@ -227,6 +227,10 @@ static int scan_for_bad_eraseblocks(void) } memset(bbt, 0 , ebcnt); + /* NOR flash does not implement block_isbad */ + if (mtd->block_isbad == NULL) + return 0; + printk(PRINT_PREF "scanning for bad eraseblocks\n"); for (i = 0; i < ebcnt; ++i) { bbt[i] = is_block_bad(i) ? 1 : 0; @@ -265,7 +269,7 @@ static int __init mtd_stresstest_init(void) tmp = mtd->size; do_div(tmp, mtd->erasesize); ebcnt = tmp; - pgcnt = mtd->erasesize / mtd->writesize; + pgcnt = mtd->erasesize / pgsize; printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, " "page size %u, count of eraseblocks %u, pages per " From 830395188fae5f4028fa3c38ab1b031aae18a64c Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 12 Jan 2010 08:58:29 -0200 Subject: [PATCH 0785/1626] perf tools: Move QUIET_STDERR def to before first use MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit QUIET_STDERR is used when detecting if -fstack-protector-all can be used. Noticed while building the perf tools on a Debian PARISC64 machine. Signed-off-by: Arnaldo Carvalho de Melo Cc: Frédéric Weisbecker Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Paul Mackerras LKML-Reference: <1263293910-8484-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar --- tools/perf/Makefile | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 652a470b5f74..07f596d29e9a 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -250,6 +250,12 @@ PTHREAD_LIBS = -lpthread # explicitly what architecture to check for. Fix this up for yours.. SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__ +ifeq ($(V), 2) + QUIET_STDERR = ">/dev/null" +else + QUIET_STDERR = ">/dev/null 2>&1" +endif + ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o /dev/null "$(QUIET_STDERR)" && echo y"), y) CFLAGS := $(CFLAGS) -fstack-protector-all endif @@ -451,11 +457,6 @@ BUILTIN_OBJS += builtin-kmem.o PERFLIBS = $(LIB_FILE) -ifeq ($(V), 2) - QUIET_STDERR = ">/dev/null" -else - QUIET_STDERR = ">/dev/null 2>&1" -endif # # Platform specific tweaks # From 1703f2c321a8a531c393e137a82602e16c6061cb Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 12 Jan 2010 08:58:30 -0200 Subject: [PATCH 0786/1626] perf tools: Check if /dev/null can be used as the -o gcc argument MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit At least on Debian PARISC64, using: acme@parisc:~/git/linux-2.6-tip$ gcc -v Using built-in specs. Target: hppa-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Debian 4.3.4-6' --with-bugurl=file:///usr/share/doc/gcc-4.3/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --enable-shared --enable-multiarch --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.3 --program-suffix=-4.3 --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --enable-mpfr --disable-libssp --enable-checking=release --build=hppa-linux-gnu --host=hppa-linux-gnu --target=hppa-linux-gnu Thread model: posix gcc version 4.3.4 (Debian 4.3.4-6) there are issues about using 'gcc -o /dev/null': /usr/bin/ld: final link failed: File truncated collect2: ld returned 1 exit status So we test that and use /dev/null in environments where it works, while using an .INTERMEDIATE file on those where it can't be used, so that the .perf.dev.null file can be used instead and then deleted when make exits. Researched-with: Kyle McMartin Researched-with: Mauro Carvalho Chehab Signed-off-by: Arnaldo Carvalho de Melo Cc: Frédéric Weisbecker Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Paul Mackerras LKML-Reference: <1263293910-8484-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar --- tools/perf/Makefile | 33 ++++++++++++++++++++++----------- 1 file changed, 22 insertions(+), 11 deletions(-) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 07f596d29e9a..2e7fa3a06806 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -256,7 +256,13 @@ else QUIET_STDERR = ">/dev/null 2>&1" endif -ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o /dev/null "$(QUIET_STDERR)" && echo y"), y) +BITBUCKET = "/dev/null" + +ifneq ($(shell sh -c "(echo '\#include '; echo 'int main(void) { return puts(\"hi\"); }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) "$(QUIET_STDERR)" && echo y"), y) + BITBUCKET = .perf.dev.null +endif + +ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o $(BITBUCKET) "$(QUIET_STDERR)" && echo y"), y) CFLAGS := $(CFLAGS) -fstack-protector-all endif @@ -484,19 +490,19 @@ ifeq ($(uname_S),Darwin) PTHREAD_LIBS = endif -ifeq ($(shell sh -c "(echo '\#include '; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y) -ifneq ($(shell sh -c "(echo '\#include '; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y) +ifeq ($(shell sh -c "(echo '\#include '; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y) +ifneq ($(shell sh -c "(echo '\#include '; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y) msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static); endif - ifneq ($(shell sh -c "(echo '\#include '; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y) + ifneq ($(shell sh -c "(echo '\#include '; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y) BASIC_CFLAGS += -DLIBELF_NO_MMAP endif else msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel and glibc-dev[el]); endif -ifneq ($(shell sh -c "(echo '\#ifndef _MIPS_SZLONG'; echo '\#define _MIPS_SZLONG 0'; echo '\#endif'; echo '\#include '; echo '\#include '; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/libdwarf -ldwarf -lelf -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y) +ifneq ($(shell sh -c "(echo '\#ifndef _MIPS_SZLONG'; echo '\#define _MIPS_SZLONG 0'; echo '\#endif'; echo '\#include '; echo '\#include '; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/libdwarf -ldwarf -lelf -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y) msg := $(warning No libdwarf.h found or old libdwarf.h found, disables dwarf support. Please install libdwarf-dev/libdwarf-devel >= 20081231); BASIC_CFLAGS += -DNO_LIBDWARF else @@ -510,7 +516,7 @@ PERL_EMBED_LDOPTS = `perl -MExtUtils::Embed -e ldopts 2>/dev/null` PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null` endif -ifneq ($(shell sh -c "(echo '\#include '; echo '\#include '; echo 'int main(void) { perl_alloc(); return 0; }') | $(CC) -x c - $(PERL_EMBED_CCOPTS) -o /dev/null $(PERL_EMBED_LDOPTS) > /dev/null 2>&1 && echo y"), y) +ifneq ($(shell sh -c "(echo '\#include '; echo '\#include '; echo 'int main(void) { perl_alloc(); return 0; }') | $(CC) -x c - $(PERL_EMBED_CCOPTS) -o $(BITBUCKET) $(PERL_EMBED_LDOPTS) > /dev/null 2>&1 && echo y"), y) BASIC_CFLAGS += -DNO_LIBPERL else ALL_LDFLAGS += $(PERL_EMBED_LDOPTS) @@ -520,20 +526,20 @@ endif ifdef NO_DEMANGLE BASIC_CFLAGS += -DNO_DEMANGLE else - has_bfd := $(shell sh -c "(echo '\#include '; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y") + has_bfd := $(shell sh -c "(echo '\#include '; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y") ifeq ($(has_bfd),y) EXTLIBS += -lbfd else - has_bfd_iberty := $(shell sh -c "(echo '\#include '; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y") + has_bfd_iberty := $(shell sh -c "(echo '\#include '; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y") ifeq ($(has_bfd_iberty),y) EXTLIBS += -lbfd -liberty else - has_bfd_iberty_z := $(shell sh -c "(echo '\#include '; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y") + has_bfd_iberty_z := $(shell sh -c "(echo '\#include '; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y") ifeq ($(has_bfd_iberty_z),y) EXTLIBS += -lbfd -liberty -lz else - has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y") + has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y") ifeq ($(has_cplus_demangle),y) EXTLIBS += -liberty BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE @@ -781,7 +787,7 @@ export TAR INSTALL DESTDIR SHELL_PATH SHELL = $(SHELL_PATH) -all:: shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) PERF-BUILD-OPTIONS +all:: .perf.dev.null shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) PERF-BUILD-OPTIONS ifneq (,$X) $(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), test '$p' -ef '$p$X' || $(RM) '$p';) endif @@ -1108,6 +1114,11 @@ clean: .PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope .FORCE-PERF-CFLAGS .PHONY: .FORCE-PERF-BUILD-OPTIONS +.perf.dev.null: + touch .perf.dev.null + +.INTERMEDIATE: .perf.dev.null + ### Make sure built-ins do not have dups and listed in perf.c # check-builtins:: From df39a2e48f99e2d706e8fa4dc99fd148eb59449d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Jan 2010 16:17:21 +0000 Subject: [PATCH 0787/1626] x86: mce.h: Fix warning in header checks Someone isn't reading their build output: Move the definition out of the exported header. Signed-off-by: Alan Cox Cc: linux-kernel@vger.kernelorg Signed-off-by: Ingo Molnar --- arch/x86/include/asm/mce.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 858baa061cfc..6c3fdd631ed3 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -108,10 +108,11 @@ struct mce_log { #define K8_MCE_THRESHOLD_BANK_5 (MCE_THRESHOLD_BASE + 5 * 9) #define K8_MCE_THRESHOLD_DRAM_ECC (MCE_THRESHOLD_BANK_4 + 0) -extern struct atomic_notifier_head x86_mce_decoder_chain; #ifdef __KERNEL__ +extern struct atomic_notifier_head x86_mce_decoder_chain; + #include #include #include From fcfbb2b5facd65efa7284cc315225bfe3d1856c2 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Fri, 8 Jan 2010 12:13:54 -0800 Subject: [PATCH 0788/1626] x86: SGI UV: Fix mapping of MMIO registers This fixes the problem of the initialization code not correctly mapping the entire MMIO space on a UV system. A side effect is the map_high() interface needed to be changed to accommodate different address and size shifts. Signed-off-by: Mike Travis Reviewed-by: Mike Habeck Cc: Cc: Jack Steiner Cc: Linus Torvalds LKML-Reference: <4B479202.7080705@sgi.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/x2apic_uv_x.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 5f92494dab61..b8bb869a6618 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -374,13 +374,13 @@ static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size) enum map_type {map_wb, map_uc}; -static __init void map_high(char *id, unsigned long base, int shift, - int max_pnode, enum map_type map_type) +static __init void map_high(char *id, unsigned long base, int pshift, + int bshift, int max_pnode, enum map_type map_type) { unsigned long bytes, paddr; - paddr = base << shift; - bytes = (1UL << shift) * (max_pnode + 1); + paddr = base << pshift; + bytes = (1UL << bshift) * (max_pnode + 1); printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr, paddr + bytes); if (map_type == map_uc) @@ -396,7 +396,7 @@ static __init void map_gru_high(int max_pnode) gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR); if (gru.s.enable) { - map_high("GRU", gru.s.base, shift, max_pnode, map_wb); + map_high("GRU", gru.s.base, shift, shift, max_pnode, map_wb); gru_start_paddr = ((u64)gru.s.base << shift); gru_end_paddr = gru_start_paddr + (1UL << shift) * (max_pnode + 1); @@ -410,7 +410,7 @@ static __init void map_mmr_high(int max_pnode) mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR); if (mmr.s.enable) - map_high("MMR", mmr.s.base, shift, max_pnode, map_uc); + map_high("MMR", mmr.s.base, shift, shift, max_pnode, map_uc); } static __init void map_mmioh_high(int max_pnode) @@ -420,7 +420,8 @@ static __init void map_mmioh_high(int max_pnode) mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR); if (mmioh.s.enable) - map_high("MMIOH", mmioh.s.base, shift, max_pnode, map_uc); + map_high("MMIOH", mmioh.s.base, shift, mmioh.s.m_io, + max_pnode, map_uc); } static __init void map_low_mmrs(void) From c5cae661d6cf808b6984762f763261adf35f3eb7 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Thu, 17 Dec 2009 13:57:09 +0000 Subject: [PATCH 0789/1626] xen: fix hang on suspend. In 65f63384 "xen: improve error handling in do_suspend" I said: - xs_suspend()/xs_resume() and dpm_suspend_noirq()/dpm_resume_noirq() were not nested in the obvious way. and changed the ordering of the calls as so: BEFORE AFTER xs_suspend dpm_suspend_noirq dpm_suspend_noirq xs_suspend *SUSPEND* *SUSPEND* dpm_resume_noirq dpm_resume_noirq xs_resume xs_resume Clearly this is not an improvement and I was talking rubbish. In particular the new ordering is susceptible to a hang if a xenstore write is in progress at the point at which the suspend kicks in. When the suspend process calls xs_suspend it tries to take the request_mutex but if a write is in progress it could be looping in xenbus_xs.c:read_reply() waiting for something to arrive on &xs_state.reply_list while holding the request_mutex (taken in the caller of read_reply). However if we have done dpm_suspend_noirq before xs_suspend then we won't get any more xenstore interrupts and process_msg() will never be woken up to add anything to the reply_list. Fix this by calling xs_suspend before dpm_suspend_noirq. If dpm_suspend_noirq fails then make sure we go through the xs_suspend_cancel() code path. Signed-off-by: Ian Campbell Acked-by: Jeremy Fitzhardinge Cc: Stable Kernel --- drivers/xen/manage.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index c4997930afc7..5d42d55e299b 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -102,15 +102,15 @@ static void do_suspend(void) goto out_thaw; } + printk(KERN_DEBUG "suspending xenstore...\n"); + xs_suspend(); + err = dpm_suspend_noirq(PMSG_SUSPEND); if (err) { printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err); goto out_resume; } - printk(KERN_DEBUG "suspending xenstore...\n"); - xs_suspend(); - err = stop_machine(xen_suspend, &cancelled, cpumask_of(0)); dpm_resume_noirq(PMSG_RESUME); @@ -120,13 +120,13 @@ static void do_suspend(void) cancelled = 1; } +out_resume: if (!cancelled) { xen_arch_resume(); xs_resume(); } else xs_suspend_cancel(); -out_resume: dpm_resume_end(PMSG_RESUME); /* Make sure timer events get retriggered on all CPUs */ From 42590a75019a50012f25a962246498dead428433 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 4 Jan 2010 16:16:23 +0900 Subject: [PATCH 0790/1626] x86/agp: Fix agp_amd64_init and agp_amd64_cleanup This fixes the regression introduced by the commit f405d2c02395a74d3883bd03ded36457aa3697ad. The above commit fixes the following issue: http://marc.info/?l=linux-kernel&m=126192729110083&w=2 However, it doesn't work properly when you remove and insert the agp_amd64 module again. agp_amd64_init() and agp_amd64_cleanup should be called only when gart_iommu is not called earlier (that is, the GART IOMMU is not enabled). We need to use 'gart_iommu_aperture' to see if GART IOMMU is enabled or not. Signed-off-by: FUJITA Tomonori Cc: mitov@issp.bas.bg Cc: davej@redhat.com LKML-Reference: <20100104161603L.fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar --- arch/x86/kernel/aperture_64.c | 1 + drivers/char/agp/amd64-agp.c | 5 +++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 3704997e8b25..f147a95fd84a 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -31,6 +31,7 @@ #include int gart_iommu_aperture; +EXPORT_SYMBOL_GPL(gart_iommu_aperture); int gart_iommu_aperture_disabled __initdata; int gart_iommu_aperture_allowed __initdata; diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 5aa7a586a7ff..1afb8968a342 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -725,12 +725,11 @@ static struct pci_driver agp_amd64_pci_driver = { int __init agp_amd64_init(void) { int err = 0; - static int done = 0; if (agp_off) return -EINVAL; - if (done++) + if (gart_iommu_aperture) return agp_bridges_found ? 0 : -ENODEV; err = pci_register_driver(&agp_amd64_pci_driver); @@ -771,6 +770,8 @@ int __init agp_amd64_init(void) static void __exit agp_amd64_cleanup(void) { + if (gart_iommu_aperture) + return; if (aperture_resource) release_resource(aperture_resource); pci_unregister_driver(&agp_amd64_pci_driver); From 864a0922dd128392467611d9857e5138c6a91999 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Wed, 13 Jan 2010 10:16:07 +0000 Subject: [PATCH 0791/1626] x86: kernel_thread() -- initialize SS to a known state Before the kernel_thread was converted into "C" we had pt_regs::ss set to __KERNEL_DS (by SAVE_ALL asm macro). Though I must admit I didn't find any *explicit* load of %ss from this structure the better to be on a safe side and set it to a known value. Signed-off-by: Cyrill Gorcunov Signed-off-by: Ian Campbell Cc: Christian Kujau Cc: Jeremy Fitzhardinge Cc: Brian Gerst LKML-Reference: <1263377768-19600-1-git-send-email-ian.campbell@citrix.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/process.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index c6ee241c8a98..02c3ee013ccd 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -288,6 +288,8 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) regs.es = __USER_DS; regs.fs = __KERNEL_PERCPU; regs.gs = __KERNEL_STACK_CANARY; +#else + regs.ss = __KERNEL_DS; #endif regs.orig_ax = -1; From e68266b7001a4e29af083716f0c36c0d6dbb1b39 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 13 Jan 2010 10:16:08 +0000 Subject: [PATCH 0792/1626] x86: xen: 64-bit kernel RPL should be 0 Under Xen 64 bit guests actually run their kernel in ring 3, however the hypervisor takes care of squashing descriptor the RPLs transparently (in order to allow them to continue to differentiate between user and kernel space CS using the RPL). Therefore the Xen paravirt backend should use RPL==0 instead of 1 (or 3). Using RPL==1 causes generic arch code to take incorrect code paths because it uses "testl $3, , je foo" type tests for a userspace CS and this considers 1==userspace. This issue was previously masked because get_kernel_rpl() was omitted when setting CS in kernel_thread(). This was fixed when kernel_thread() was unified with 32 bit in f443ff4201dd25cd4dec183f9919ecba90c8edc2. Signed-off-by: Ian Campbell Cc: Christian Kujau Cc: Jeremy Fitzhardinge Cc: Cyrill Gorcunov Cc: Brian Gerst LKML-Reference: <1263377768-19600-2-git-send-email-ian.campbell@citrix.com> Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 2b26dd5930c6..36daccb68642 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1151,9 +1151,13 @@ asmlinkage void __init xen_start_kernel(void) /* keep using Xen gdt for now; no urgent need to change it */ +#ifdef CONFIG_X86_32 pv_info.kernel_rpl = 1; if (xen_feature(XENFEAT_supervisor_mode_kernel)) pv_info.kernel_rpl = 0; +#else + pv_info.kernel_rpl = 0; +#endif /* set the limit of our address space */ xen_reserve_top(); From d01799b2f399603ae4cecc06f6ea146c57519cb1 Mon Sep 17 00:00:00 2001 From: Przemo Firszt Date: Mon, 4 Jan 2010 12:32:00 +0100 Subject: [PATCH 0793/1626] HID: fix pad button definition in hid-wacom This fix is required for xorg driver to recognise 2 pad buttons Signed-off-by: Przemo Firszt Signed-off-by: Jiri Kosina --- drivers/hid/hid-wacom.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 747542172242..75ea66affb66 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -196,6 +196,9 @@ static int wacom_probe(struct hid_device *hdev, /* Pad */ input->evbit[0] |= BIT(EV_MSC); input->mscbit[0] |= BIT(MSC_SERIAL); + set_bit(BTN_0, input->keybit); + set_bit(BTN_1, input->keybit); + set_bit(BTN_TOOL_FINGER, input->keybit); /* Distance, rubber and mouse */ input->absbit[0] |= BIT(ABS_DISTANCE); From 23aeb61e7e1f02fb0f3b8f9e798e75537ca1731d Mon Sep 17 00:00:00 2001 From: Christian Schuerer-Waldheim Date: Wed, 6 Jan 2010 14:49:57 +0100 Subject: [PATCH 0794/1626] HID: add device IDs for new model of Apple Wireless Keyboard Added device IDs for the new model of the Apple Wireless Keyboard (November 2009). Signed-off-by: Christian Schuerer-Waldheim Signed-off-by: Jiri Kosina --- drivers/hid/hid-apple.c | 7 +++++++ drivers/hid/hid-core.c | 3 +++ drivers/hid/hid-ids.h | 3 +++ 3 files changed, 13 insertions(+) diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 4b96e7a898cf..5b4d66dc1a05 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -431,6 +431,13 @@ static const struct hid_device_id apple_devices[] = { .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI), + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO), + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | + APPLE_ISO_KEYBOARD }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS), + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY), diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 389cd5f0a681..eabe5f87c6c1 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1285,6 +1285,9 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index b9de32b6b10d..010368e649ed 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -88,6 +88,9 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236 #define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237 #define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238 +#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239 +#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a +#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b #define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241 From 0e253fdb3b5739fd8514f617ec582762bcfaea48 Mon Sep 17 00:00:00 2001 From: Przemo Firszt Date: Sat, 9 Jan 2010 15:20:03 +0100 Subject: [PATCH 0795/1626] HID: wacom: Add BTN_TOOL_FINGER for pad button reporting Without this patch xf86-input-wacom driver wasn't able to properly recognise pad button events. It was also causing some problems with button mapping. Signed-off-by: Przemo Firszt Signed-off-by: Jiri Kosina --- drivers/hid/hid-wacom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 75ea66affb66..12dcda529201 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -142,6 +142,7 @@ static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report, wdata->butstate = rw; input_report_key(input, BTN_0, rw & 0x02); input_report_key(input, BTN_1, rw & 0x01); + input_report_key(input, BTN_TOOL_FINGER, 0xf0); input_event(input, EV_MSC, MSC_SERIAL, 0xf0); input_sync(input); } From 1373411ae4cd0caf2e1a35fb801dd9a00b64dea2 Mon Sep 17 00:00:00 2001 From: Jonathan Nieder Date: Mon, 28 Dec 2009 19:38:27 +0000 Subject: [PATCH 0796/1626] kbuild: really fix bzImage build with non-bash sh MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In an x86 build with CONFIG_KERNEL_LZMA enabled and dash as sh, arch/x86/boot/compressed/vmlinux.bin.lzma ends with '\xf0\x7d\x39\x00' (16 bytes) instead of the 4 bytes intended and the resulting vmlinuz fails to boot. This improves on the previous behavior, in which the file contained the characters '-ne ' as well, but not by much. Previous commits replaced "echo -ne" first with "/bin/echo -ne", then "printf" in the hope of improving portability, but none of these commands is guaranteed to support hexadecimal escapes on POSIX systems. So use the shell to convert from hexadecimal to octal. With this change, an LZMA-compressed kernel built with dash as sh boots correctly again. Reported-by: Sebastian Dalfuß Reported-by: Oliver Hartkopp Reported-by: Michael Guntsche Signed-off-by: Jonathan Nieder Cc: Michael Tokarev Cc: Alek Du Cc: Andrew Morton Signed-off-by: Michal Marek --- scripts/Makefile.lib | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 0fe48cd91ffa..f9bdf264473d 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -219,8 +219,13 @@ for F in $1; do \ fsize=$$(stat -c "%s" $$F); \ dec_size=$$(expr $$dec_size + $$fsize); \ done; \ -printf "%08x" $$dec_size | \ - sed 's/\(..\)\(..\)\(..\)\(..\)/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g' \ +printf "%08x\n" $$dec_size | \ + sed 's/\(..\)/\1 /g' | { \ + read ch0 ch1 ch2 ch3; \ + for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \ + printf '%s%03o' '\\' $$((0x$$ch)); \ + done; \ + } \ ) quiet_cmd_bzip2 = BZIP2 $@ From 07105202bdebf6e9a4c72c634cf90398abfad870 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Fri, 8 Jan 2010 12:25:37 +0100 Subject: [PATCH 0797/1626] Makefile: do not override LC_CTYPE Setting LC_CTYPE=C breaks localized messages in some setups. With only LC_COLLATE=C and LC_NUMERIC=C, we get almost all we need, except for not so defined character classes and tolower()/toupper(). The former is not a big issue, because we can assume that e.g. [:alpha:] will always include a-zA-Z and we only ever process ASCII input. The latter seems only affect arch/sh/tools/gen-mach-types, which we can handle separately. So after this patch the meaning of ranges like [a-z], the behavior of sort and join, etc. should be the same everywhere and at the same time gcc should be able to print localized waring and error messages. LC_NUMERIC=C might not be necessary, but setting it doesn't hurt. Reported-by: Simon Horman Reported-by: Sergei Trofimovich Acked-by: H. Peter Anvin Tested-by: Simon Horman Tested-by: Masami Hiramatsu Signed-off-by: Michal Marek --- Makefile | 3 +-- arch/sh/tools/Makefile | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/Makefile b/Makefile index 9f64552f09d6..5f333bf870f4 100644 --- a/Makefile +++ b/Makefile @@ -18,10 +18,9 @@ MAKEFLAGS += -rR --no-print-directory # Avoid funny character set dependencies unexport LC_ALL -LC_CTYPE=C LC_COLLATE=C LC_NUMERIC=C -export LC_CTYPE LC_COLLATE LC_NUMERIC +export LC_COLLATE LC_NUMERIC # We are using a recursive build, so we need to do a little thinking # to get the ordering right. diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile index 558a56bcc7cf..2082af1f3fef 100644 --- a/arch/sh/tools/Makefile +++ b/arch/sh/tools/Makefile @@ -13,4 +13,4 @@ include/generated/machtypes.h: $(src)/gen-mach-types $(src)/mach-types @echo ' Generating $@' $(Q)mkdir -p $(dir $@) - $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } + $(Q)LC_ALL=C $(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } From 0375fc03cd0bd31fb8b37e40f091f8ffc567acfd Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 11 Jan 2010 15:43:24 +0800 Subject: [PATCH 0798/1626] [ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus There is no such GPIO for udc vbus sensing, put '-1' instead of default '0' as '0' does mean a valid GPIO. Signed-off-by: Eric Miao --- arch/arm/mach-pxa/corgi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 74446cf8ae69..da3156d8690b 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -457,6 +457,7 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = { * USB Device Controller */ static struct pxa2xx_udc_mach_info udc_info __initdata = { + .gpio_vbus = -1, /* no connect GPIO; corgi can't tell connection status */ .gpio_pullup = CORGI_GPIO_USB_PULLUP, }; From 463de2096d8040af2f79f8c4f6a61c965a5109f0 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 4 Jan 2010 15:22:18 +0800 Subject: [PATCH 0799/1626] [ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26x GPIO89_AC97_nRESET is really a PXA26x specific option and was incorrectly named. Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/mfp-pxa25x.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h index b13dc0269a6d..9c787855cf24 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h @@ -169,7 +169,6 @@ #define GPIO86_nSDCS2 MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH) #define GPIO87_nSDCS3 MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH) #define GPIO88_RDnWR MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH) -#define GPIO89_nACRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH) /* USB */ #define GPIO9_USB_RCV MFP_CFG_IN(GPIO9, AF1) @@ -186,6 +185,9 @@ #define GPIO30_ASSP_TXD MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW) #define GPIO31_ASSP_SFRM_IN MFP_CFG_IN(GPIO31, AF1) #define GPIO31_ASSP_SFRM_OUT MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW) -#endif + +/* AC97 */ +#define GPIO89_AC97_nRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH) +#endif /* CONFIG_CPU_PXA26x */ #endif /* __ASM_ARCH_MFP_PXA25X_H */ From c70f5a60994058895384f593989a9fbe6fe6adee Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 11 Jan 2010 20:39:37 +0800 Subject: [PATCH 0800/1626] [ARM] pxa: fix irq suspend/resume for pxa25x PXA25x does not have IPR registers, saving and restoring should happen only for pxa27x and pxa3xx. Signed-off-by: Eric Miao --- arch/arm/mach-pxa/irq.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 6112af431fa4..1beb40f692fc 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -164,8 +164,11 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) saved_icmr[i] = _ICMR(irq); _ICMR(irq) = 0; } - for (i = 0; i < pxa_internal_irq_nr; i++) - saved_ipr[i] = IPR(i); + + if (cpu_is_pxa27x() || cpu_is_pxa3xx()) { + for (i = 0; i < pxa_internal_irq_nr; i++) + saved_ipr[i] = IPR(i); + } return 0; } @@ -174,12 +177,15 @@ static int pxa_irq_resume(struct sys_device *dev) { int i, irq = PXA_IRQ(0); + if (cpu_is_pxa27x() || cpu_is_pxa3xx()) { + for (i = 0; i < pxa_internal_irq_nr; i++) + IPR(i) = saved_ipr[i]; + } + for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) { _ICMR(irq) = saved_icmr[i]; _ICLR(irq) = 0; } - for (i = 0; i < pxa_internal_irq_nr; i++) - IPR(i) = saved_ipr[i]; ICCR = 1; return 0; From 4dee8baa18d611b6dc854e1cc193550ff6f687be Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 13 Jan 2010 17:20:08 +0100 Subject: [PATCH 0801/1626] ALSA: hda - Fix Toshiba NB20x quirk entry The alc664-mode4 model doesn't seem to fit with Toshiba NB205 correctly. NB205 uses the pin 0x17 connected with the mixer 0x0f for the speaker output, which isn't controlled by mode4 model at all. Rather model=auto works fine as is on the latest driver, so let it back again. Tested-by: Nickolas Lloyd Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e3caa78ccd54..bff60cea7777 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -17251,7 +17251,7 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = { SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS), SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K", ALC662_3ST_6ch_DIG), - SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB200", ALC663_ASUS_MODE4), + SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB20x", ALC662_AUTO), SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10), SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L", ALC662_3ST_6ch_DIG), From a76221d47ef2b73ff16c0fef00a784026308ea02 Mon Sep 17 00:00:00 2001 From: Alex Murray Date: Wed, 13 Jan 2010 23:15:03 +1030 Subject: [PATCH 0802/1626] ALSA: hda - Improved MacBook (Pro) 5,1 / 5,2 support This patch adds support for automatically muting the speakers when headphones are inserted, as well as relabelling the headphone widgets from the non-standard "HP" to the standard "Headphone" for the mb5 model. Signed-off-by: Alex Murray Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index bff60cea7777..11b989bacd3c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7094,8 +7094,8 @@ static struct snd_kcontrol_new alc885_mb5_mixer[] = { HDA_BIND_MUTE ("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("LFE Playback Volume", 0x0e, 0x00, HDA_OUTPUT), HDA_BIND_MUTE ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT), - HDA_CODEC_VOLUME("HP Playback Volume", 0x0f, 0x00, HDA_OUTPUT), - HDA_BIND_MUTE ("HP Playback Switch", 0x0f, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0f, 0x00, HDA_OUTPUT), + HDA_BIND_MUTE ("Headphone Playback Switch", 0x0f, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_MUTE ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), @@ -7496,6 +7496,7 @@ static struct hda_verb alc885_mb5_init_verbs[] = { {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x14, AC_VERB_SET_CONNECT_SEL, 0x03}, + {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, /* Front Mic pin: input vref at 80% */ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, @@ -7680,6 +7681,27 @@ static void alc885_mbp3_setup(struct hda_codec *codec) spec->autocfg.speaker_pins[0] = 0x14; } +static void alc885_mb5_automute(struct hda_codec *codec) +{ + unsigned int present; + + present = snd_hda_codec_read(codec, 0x14, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + snd_hda_codec_amp_stereo(codec, 0x18, HDA_OUTPUT, 0, + HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); + snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0, + HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); + +} + +static void alc885_mb5_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + /* Headphone insertion or removal. */ + if ((res >> 26) == ALC880_HP_EVENT) + alc885_mb5_automute(codec); +} + static void alc885_imac91_automute(struct hda_codec *codec) { unsigned int present; @@ -9126,6 +9148,8 @@ static struct alc_config_preset alc882_presets[] = { .input_mux = &mb5_capture_source, .dig_out_nid = ALC882_DIGOUT_NID, .dig_in_nid = ALC882_DIGIN_NID, + .unsol_event = alc885_mb5_unsol_event, + .init_hook = alc885_mb5_automute, }, [ALC885_MACPRO] = { .mixers = { alc882_macpro_mixer }, From e9cfa167b6b598a364c53459bee93b508f073c65 Mon Sep 17 00:00:00 2001 From: Dirk Teurlings Date: Wed, 13 Jan 2010 20:03:30 +0100 Subject: [PATCH 0803/1626] [ARM] Orion5x: add GPIO LED and buttons for wrt350n v2 Signed-off-by: Dirk Teurlings Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion5x/wrt350n-v2-setup.c | 79 ++++++++++++++++++++++++ 1 file changed, 79 insertions(+) diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index 1b4ad9d5e2eb..cb0feca193d4 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -15,6 +15,9 @@ #include #include #include +#include +#include +#include #include #include #include @@ -24,6 +27,80 @@ #include "common.h" #include "mpp.h" +/* + * LEDs attached to GPIO + */ +static struct gpio_led wrt350n_v2_led_pins[] = { + { + .name = "wrt350nv2:green:power", + .gpio = 0, + .active_low = 1, + }, { + .name = "wrt350nv2:green:security", + .gpio = 1, + .active_low = 1, + }, { + .name = "wrt350nv2:orange:power", + .gpio = 5, + .active_low = 1, + }, { + .name = "wrt350nv2:green:usb", + .gpio = 6, + .active_low = 1, + }, { + .name = "wrt350nv2:green:wireless", + .gpio = 7, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data wrt350n_v2_led_data = { + .leds = wrt350n_v2_led_pins, + .num_leds = ARRAY_SIZE(wrt350n_v2_led_pins), +}; + +static struct platform_device wrt350n_v2_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &wrt350n_v2_led_data, + }, +}; + +/* + * Buttons attached to GPIO + */ +static struct gpio_keys_button wrt350n_v2_buttons[] = { + { + .code = KEY_RESTART, + .gpio = 3, + .desc = "Reset Button", + .active_low = 1, + }, { + .code = KEY_WLAN, + .gpio = 2, + .desc = "WPS Button", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data wrt350n_v2_button_data = { + .buttons = wrt350n_v2_buttons, + .nbuttons = ARRAY_SIZE(wrt350n_v2_buttons), +}; + +static struct platform_device wrt350n_v2_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &wrt350n_v2_button_data, + }, +}; + +/* + * General setup + */ static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = { { 0, MPP_GPIO }, /* Power LED green (0=on) */ { 1, MPP_GPIO }, /* Security LED (0=on) */ @@ -140,6 +217,8 @@ static void __init wrt350n_v2_init(void) orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE, WRT350N_V2_NOR_BOOT_SIZE); platform_device_register(&wrt350n_v2_nor_flash); + platform_device_register(&wrt350n_v2_leds); + platform_device_register(&wrt350n_v2_button_device); } static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) From c3311c13adc1021e986fef12609ceb395ffc5014 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 13 Jan 2010 20:44:25 +0100 Subject: [PATCH 0804/1626] [S390] fix loading of PER control registers for utrace. If the current task enables / disables PER tracing for itself the PER control registers need to be loaded in FixPerRegisters. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ptrace.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 13815d39f7dd..7cf464234419 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -65,6 +65,7 @@ FixPerRegisters(struct task_struct *task) { struct pt_regs *regs; per_struct *per_info; + per_cr_words cr_words; regs = task_pt_regs(task); per_info = (per_struct *) &task->thread.per_info; @@ -98,6 +99,13 @@ FixPerRegisters(struct task_struct *task) per_info->control_regs.bits.storage_alt_space_ctl = 1; else per_info->control_regs.bits.storage_alt_space_ctl = 0; + + if (task == current) { + __ctl_store(cr_words, 9, 11); + if (memcmp(&cr_words, &per_info->control_regs.words, + sizeof(cr_words)) != 0) + __ctl_load(per_info->control_regs.words, 9, 11); + } } void user_enable_single_step(struct task_struct *task) From f8d5faf718c9ff2c04eb8484585d4963c4111cd7 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 13 Jan 2010 20:44:26 +0100 Subject: [PATCH 0805/1626] [S390] clear TIF_SINGLE_STEP for new process. Clear the TIF_SINGLE_STEP bit in copy_thread. The new process did not get a PER event of its own. It is wrong deliver a SIGTRAP that was meant for the parent process. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/process.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 5417eb57271a..b98fe8e6e507 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -217,6 +217,7 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp, p->thread.mm_segment = get_fs(); /* Don't copy debug registers */ memset(&p->thread.per_info, 0, sizeof(p->thread.per_info)); + clear_tsk_thread_flag(p, TIF_SINGLE_STEP); /* Initialize per thread user and system timer values */ ti = task_thread_info(p); ti->user_timer = 0; From 6f50248ef0efa7453397eb53e41e8aa5df534492 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 13 Jan 2010 20:44:27 +0100 Subject: [PATCH 0806/1626] [S390] duplicate SIGTRAP on signal delivery. The code in do_signal sets the TIF_SINGLE_STEP bit and calls tracehook_signal_handler after the signal frame has been set up. This causes two SIGTRAP signals to be delivered to the tracer. Stop setting the TIF_SINGLE_STEP bit in do_signal to get the correct number of SIGTRAPs. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/signal.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index 6b4fef877f9d..1675c48b9145 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -499,19 +499,11 @@ void do_signal(struct pt_regs *regs) if (test_thread_flag(TIF_RESTORE_SIGMASK)) clear_thread_flag(TIF_RESTORE_SIGMASK); - /* - * If we would have taken a single-step trap - * for a normal instruction, act like we took - * one for the handler setup. - */ - if (current->thread.per_info.single_step) - set_thread_flag(TIF_SINGLE_STEP); - /* * Let tracing know that we've done the handler setup. */ tracehook_signal_handler(signr, &info, &ka, regs, - test_thread_flag(TIF_SINGLE_STEP)); + current->thread.per_info.single_step); } return; } From bebf023d415fd8984994a596aaa83cd0a3046d0b Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 13 Jan 2010 20:44:28 +0100 Subject: [PATCH 0807/1626] [S390] remove superfluous TIF_USEDFPU bit The TIF_USEDFPU bit is always 0 for s390 and it is not tested anywhere. Remove the bit. At the same time remove the calls to clear_used_math() as well. The PF_USED_MATH bit is never set for s390 either. Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/thread_info.h | 12 +++++------- arch/s390/kernel/process.c | 2 -- arch/s390/kernel/setup.c | 6 ------ 3 files changed, 5 insertions(+), 15 deletions(-) diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h index 07eb61b2fb3a..66069e736842 100644 --- a/arch/s390/include/asm/thread_info.h +++ b/arch/s390/include/asm/thread_info.h @@ -93,13 +93,12 @@ static inline struct thread_info *current_thread_info(void) #define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */ #define TIF_SECCOMP 10 /* secure computing */ #define TIF_SYSCALL_TRACEPOINT 11 /* syscall tracepoint instrumentation */ -#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ -#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling +#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_31BIT 18 /* 32bit process */ -#define TIF_MEMDIE 19 -#define TIF_RESTORE_SIGMASK 20 /* restore signal mask in do_signal() */ -#define TIF_FREEZE 21 /* thread is freezing for suspend */ +#define TIF_31BIT 17 /* 32bit process */ +#define TIF_MEMDIE 18 +#define TIF_RESTORE_SIGMASK 19 /* restore signal mask in do_signal() */ +#define TIF_FREEZE 20 /* thread is freezing for suspend */ #define _TIF_NOTIFY_RESUME (1<active_mm = &init_mm; BUG_ON(current->mm); From 880348653ec2eda81550a8aa37c2eb625922f695 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 20:44:29 +0100 Subject: [PATCH 0808/1626] [S390] dasd: add missing compat ptr conversion Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_ioctl.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c index 478bcdb90b6f..fc7b30b4a255 100644 --- a/drivers/s390/block/dasd_ioctl.c +++ b/drivers/s390/block/dasd_ioctl.c @@ -17,7 +17,7 @@ #include #include #include - +#include #include #include #include @@ -358,9 +358,8 @@ dasd_ioctl_set_ro(struct block_device *bdev, void __user *argp) } static int dasd_ioctl_readall_cmb(struct dasd_block *block, unsigned int cmd, - unsigned long arg) + struct cmbdata __user *argp) { - struct cmbdata __user *argp = (void __user *) arg; size_t size = _IOC_SIZE(cmd); struct cmbdata data; int ret; @@ -376,7 +375,12 @@ dasd_do_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg) { struct dasd_block *block = bdev->bd_disk->private_data; - void __user *argp = (void __user *)arg; + void __user *argp; + + if (is_compat_task()) + argp = compat_ptr(arg); + else + argp = (void __user *)arg; if (!block) return -ENODEV; @@ -414,7 +418,7 @@ dasd_do_ioctl(struct block_device *bdev, fmode_t mode, case BIODASDCMFDISABLE: return disable_cmf(block->base->cdev); case BIODASDREADALLCMB: - return dasd_ioctl_readall_cmb(block, cmd, arg); + return dasd_ioctl_readall_cmb(block, cmd, argp); default: /* if the discipline has an ioctl method try it. */ if (block->base->discipline->ioctl) { From 44ee6a8564a89a77206b0b13cea91fc2f4ff997d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 20:44:30 +0100 Subject: [PATCH 0809/1626] [S390] cio: add missing compat ptr conversion Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/chsc_sch.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/s390/cio/chsc_sch.c b/drivers/s390/cio/chsc_sch.c index cc5144b6f9d9..c84ac9443079 100644 --- a/drivers/s390/cio/chsc_sch.c +++ b/drivers/s390/cio/chsc_sch.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -770,24 +771,30 @@ out_free: static long chsc_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { + void __user *argp; + CHSC_MSG(2, "chsc_ioctl called, cmd=%x\n", cmd); + if (is_compat_task()) + argp = compat_ptr(arg); + else + argp = (void __user *)arg; switch (cmd) { case CHSC_START: - return chsc_ioctl_start((void __user *)arg); + return chsc_ioctl_start(argp); case CHSC_INFO_CHANNEL_PATH: - return chsc_ioctl_info_channel_path((void __user *)arg); + return chsc_ioctl_info_channel_path(argp); case CHSC_INFO_CU: - return chsc_ioctl_info_cu((void __user *)arg); + return chsc_ioctl_info_cu(argp); case CHSC_INFO_SCH_CU: - return chsc_ioctl_info_sch_cu((void __user *)arg); + return chsc_ioctl_info_sch_cu(argp); case CHSC_INFO_CI: - return chsc_ioctl_conf_info((void __user *)arg); + return chsc_ioctl_conf_info(argp); case CHSC_INFO_CCL: - return chsc_ioctl_conf_comp_list((void __user *)arg); + return chsc_ioctl_conf_comp_list(argp); case CHSC_INFO_CPD: - return chsc_ioctl_chpd((void __user *)arg); + return chsc_ioctl_chpd(argp); case CHSC_INFO_DCAL: - return chsc_ioctl_dcal((void __user *)arg); + return chsc_ioctl_dcal(argp); default: /* unknown ioctl number */ return -ENOIOCTLCMD; } From 8f3eabe3835449117058efaf5e90f28bf030e859 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 20:44:31 +0100 Subject: [PATCH 0810/1626] [S390] vmcp: add missing compat ptr conversion Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/vmcp.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/s390/char/vmcp.c b/drivers/s390/char/vmcp.c index a6087cec55b4..921dcda77676 100644 --- a/drivers/s390/char/vmcp.c +++ b/drivers/s390/char/vmcp.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -139,21 +140,26 @@ vmcp_write(struct file *file, const char __user *buff, size_t count, static long vmcp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { struct vmcp_session *session; + int __user *argp; int temp; session = (struct vmcp_session *)file->private_data; + if (is_compat_task()) + argp = compat_ptr(arg); + else + argp = (int __user *)arg; if (mutex_lock_interruptible(&session->mutex)) return -ERESTARTSYS; switch (cmd) { case VMCP_GETCODE: temp = session->resp_code; mutex_unlock(&session->mutex); - return put_user(temp, (int __user *)arg); + return put_user(temp, argp); case VMCP_SETBUF: free_pages((unsigned long)session->response, get_order(session->bufsize)); session->response=NULL; - temp = get_user(session->bufsize, (int __user *)arg); + temp = get_user(session->bufsize, argp); if (get_order(session->bufsize) > 8) { session->bufsize = PAGE_SIZE; temp = -EINVAL; @@ -163,7 +169,7 @@ static long vmcp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case VMCP_GETSIZE: temp = session->resp_size; mutex_unlock(&session->mutex); - return put_user(temp, (int __user *)arg); + return put_user(temp, argp); default: mutex_unlock(&session->mutex); return -ENOIOCTLCMD; From 16e1a577693a470367287281765b7daad0998fc1 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 20:44:32 +0100 Subject: [PATCH 0811/1626] [S390] fs3270: add missing compat ptr conversion Add missing compat ptr conversion including two additional whitespace changes that aren't worth a separate patch. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/fs3270.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c index 247b2b934728..31c59b0d6df0 100644 --- a/drivers/s390/char/fs3270.c +++ b/drivers/s390/char/fs3270.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include @@ -322,6 +323,7 @@ fs3270_write(struct file *filp, const char __user *data, size_t count, loff_t *o static long fs3270_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { + char __user *argp; struct fs3270 *fp; struct raw3270_iocb iocb; int rc; @@ -329,6 +331,10 @@ fs3270_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) fp = filp->private_data; if (!fp) return -ENODEV; + if (is_compat_task()) + argp = compat_ptr(arg); + else + argp = (char __user *)arg; rc = 0; mutex_lock(&fs3270_mutex); switch (cmd) { @@ -339,10 +345,10 @@ fs3270_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) fp->write_command = arg; break; case TUBGETI: - rc = put_user(fp->read_command, (char __user *) arg); + rc = put_user(fp->read_command, argp); break; case TUBGETO: - rc = put_user(fp->write_command,(char __user *) arg); + rc = put_user(fp->write_command, argp); break; case TUBGETMOD: iocb.model = fp->view.model; @@ -351,8 +357,7 @@ fs3270_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) iocb.pf_cnt = 24; iocb.re_cnt = 20; iocb.map = 0; - if (copy_to_user((char __user *) arg, &iocb, - sizeof(struct raw3270_iocb))) + if (copy_to_user(argp, &iocb, sizeof(struct raw3270_iocb))) rc = -EFAULT; break; } @@ -511,8 +516,8 @@ static const struct file_operations fs3270_fops = { .write = fs3270_write, /* write */ .unlocked_ioctl = fs3270_ioctl, /* ioctl */ .compat_ioctl = fs3270_ioctl, /* ioctl */ - .open = fs3270_open, /* open */ - .release = fs3270_close, /* release */ + .open = fs3270_open, /* open */ + .release = fs3270_close, /* release */ }; /* From a58c26bba9ebe97fea99aee125728b1f3886499e Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 13 Jan 2010 20:44:33 +0100 Subject: [PATCH 0812/1626] [S390] use helpers for rlimits Make sure compiler won't do weird things with limits. E.g. fetching them twice may return 2 different values after writable limits are implemented. I.e. either use rlimit helpers added in 3e10e716abf3c71bdb5d86b8f507f9e72236c9cd or ACCESS_ONCE if not applicable. Cc: Heiko Carstens Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Signed-off-by: Jiri Slaby Signed-off-by: Martin Schwidefsky --- arch/s390/mm/mmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c index f4558ccf02b9..869efbaed3ea 100644 --- a/arch/s390/mm/mmap.c +++ b/arch/s390/mm/mmap.c @@ -40,7 +40,7 @@ static inline unsigned long mmap_base(void) { - unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur; + unsigned long gap = rlimit(RLIMIT_STACK); if (gap < MIN_GAP) gap = MIN_GAP; @@ -61,7 +61,7 @@ static inline int mmap_is_legacy(void) #endif return sysctl_legacy_va_layout || (current->personality & ADDR_COMPAT_LAYOUT) || - current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY; + rlimit(RLIMIT_STACK) == RLIM_INFINITY; } #ifndef CONFIG_64BIT From 02beaccc901b7a28ac1de79f3ed122f5fda220b1 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 20:44:34 +0100 Subject: [PATCH 0813/1626] [S390] smp: setup smp_processor_id early smp_processor_id() is supposed to work before setup_arch() gets called. Before that smp_processor_id() may return just an arbitrary value that is contained in the uninitialized boot lowcore. So provide the arch function which will override the weak function in init/main.c. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 1 - arch/s390/kernel/smp.c | 6 ++++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 2148ad3d490d..2d6a265b0145 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -849,7 +849,6 @@ setup_arch(char **cmdline_p) setup_lowcore(); cpu_init(); - __cpu_logical_map[0] = stap(); s390_init_cpu_topology(); /* diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 93e52039321b..eebce7fdc97c 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -717,6 +717,12 @@ void __init smp_cpus_done(unsigned int max_cpus) { } +void __init smp_setup_processor_id(void) +{ + S390_lowcore.cpu_nr = 0; + __cpu_logical_map[0] = stap(); +} + /* * the frequency of the profiling timer can be changed * by writing a multiplier value into /proc/profile. From c6a5f8cea2e5454fce3859ca5ed381c2535184cf Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 20:44:35 +0100 Subject: [PATCH 0814/1626] [S390] smp: remove volatile type quilifier from __cpu_logical_map Remove pointless qualifier. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/sigp.h | 2 +- arch/s390/kernel/setup.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/include/asm/sigp.h b/arch/s390/include/asm/sigp.h index ec403d4304f8..0cc620a6a2cc 100644 --- a/arch/s390/include/asm/sigp.h +++ b/arch/s390/include/asm/sigp.h @@ -19,7 +19,7 @@ #include /* get real cpu address from logical cpu number */ -extern volatile int __cpu_logical_map[]; +extern int __cpu_logical_map[]; typedef enum { diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 2d6a265b0145..3fe1680c3899 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -87,7 +87,7 @@ unsigned long elf_hwcap = 0; char elf_platform[ELF_PLATFORM_SIZE]; struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS]; -volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */ +int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */ int __initdata memory_end_set; unsigned long __initdata memory_end; From 957a37ad587f3ef1022f1fe434d818cbed38eb95 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 20:44:36 +0100 Subject: [PATCH 0815/1626] [S390] tape_block: remove ioctl function This is just a complicated construct which always returns -EINVAL. Just remove it. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/tape_block.c | 39 ---------------------------------- 1 file changed, 39 deletions(-) diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index 96816149368a..8d3d720737da 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -46,8 +46,6 @@ */ static int tapeblock_open(struct block_device *, fmode_t); static int tapeblock_release(struct gendisk *, fmode_t); -static int tapeblock_ioctl(struct block_device *, fmode_t, unsigned int, - unsigned long); static int tapeblock_medium_changed(struct gendisk *); static int tapeblock_revalidate_disk(struct gendisk *); @@ -55,7 +53,6 @@ static const struct block_device_operations tapeblock_fops = { .owner = THIS_MODULE, .open = tapeblock_open, .release = tapeblock_release, - .ioctl = tapeblock_ioctl, .media_changed = tapeblock_medium_changed, .revalidate_disk = tapeblock_revalidate_disk, }; @@ -415,42 +412,6 @@ tapeblock_release(struct gendisk *disk, fmode_t mode) return 0; } -/* - * Support of some generic block device IOCTLs. - */ -static int -tapeblock_ioctl( - struct block_device * bdev, - fmode_t mode, - unsigned int command, - unsigned long arg -) { - int rc; - int minor; - struct gendisk *disk = bdev->bd_disk; - struct tape_device *device; - - rc = 0; - BUG_ON(!disk); - device = disk->private_data; - BUG_ON(!device); - minor = MINOR(bdev->bd_dev); - - DBF_LH(6, "tapeblock_ioctl(0x%0x)\n", command); - DBF_LH(6, "device = %d:%d\n", tapeblock_major, minor); - - switch (command) { - /* Refuse some IOCTL calls without complaining (mount). */ - case 0x5310: /* CDROMMULTISESSION */ - rc = -EINVAL; - break; - default: - rc = -EINVAL; - } - - return rc; -} - /* * Initialize block device frontend. */ From fb380aadfe34e8d3ce628cb3e386882351940874 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 20:44:37 +0100 Subject: [PATCH 0816/1626] [S390] Move __cpu_logical_map to smp.c Finally move it to the place where it belongs to and make get rid of it for !CONFIG_SMP. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/sigp.h | 18 +++++++++++++----- arch/s390/kernel/setup.c | 1 - arch/s390/kernel/smp.c | 3 +++ arch/s390/kernel/topology.c | 2 +- arch/s390/lib/spinlock.c | 2 +- 5 files changed, 18 insertions(+), 8 deletions(-) diff --git a/arch/s390/include/asm/sigp.h b/arch/s390/include/asm/sigp.h index 0cc620a6a2cc..f72d611f7e13 100644 --- a/arch/s390/include/asm/sigp.h +++ b/arch/s390/include/asm/sigp.h @@ -15,12 +15,20 @@ #ifndef __SIGP__ #define __SIGP__ -#include -#include +#include /* get real cpu address from logical cpu number */ extern int __cpu_logical_map[]; +static inline int cpu_logical_map(int cpu) +{ +#ifdef CONFIG_SMP + return __cpu_logical_map[cpu]; +#else + return stap(); +#endif +} + typedef enum { sigp_unassigned=0x0, @@ -79,7 +87,7 @@ signal_processor(__u16 cpu_addr, sigp_order_code order_code) " ipm %0\n" " srl %0,28\n" : "=d" (ccode) - : "d" (reg1), "d" (__cpu_logical_map[cpu_addr]), + : "d" (reg1), "d" (cpu_logical_map(cpu_addr)), "a" (order_code) : "cc" , "memory"); return ccode; } @@ -98,7 +106,7 @@ signal_processor_p(__u32 parameter, __u16 cpu_addr, sigp_order_code order_code) " ipm %0\n" " srl %0,28\n" : "=d" (ccode) - : "d" (reg1), "d" (__cpu_logical_map[cpu_addr]), + : "d" (reg1), "d" (cpu_logical_map(cpu_addr)), "a" (order_code) : "cc" , "memory"); return ccode; } @@ -118,7 +126,7 @@ signal_processor_ps(__u32 *statusptr, __u32 parameter, __u16 cpu_addr, " ipm %0\n" " srl %0,28\n" : "=d" (ccode), "+d" (reg1) - : "d" (__cpu_logical_map[cpu_addr]), "a" (order_code) + : "d" (cpu_logical_map(cpu_addr)), "a" (order_code) : "cc" , "memory"); *statusptr = reg1; return ccode; diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 3fe1680c3899..8d8957b38ab3 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -87,7 +87,6 @@ unsigned long elf_hwcap = 0; char elf_platform[ELF_PLATFORM_SIZE]; struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS]; -int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */ int __initdata memory_end_set; unsigned long __initdata memory_end; diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index eebce7fdc97c..76a6fdd46c45 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -52,6 +52,9 @@ #include #include "entry.h" +/* logical cpu to cpu address */ +int __cpu_logical_map[NR_CPUS]; + static struct task_struct *current_set[NR_CPUS]; static u8 smp_cpu_type; diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 3c72c9cf22b6..14ef6f05e432 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -114,7 +114,7 @@ static void add_cpus_to_core(struct tl_cpu *tl_cpu, struct core_info *core) rcpu = CPU_BITS - 1 - cpu + tl_cpu->origin; for_each_present_cpu(lcpu) { - if (__cpu_logical_map[lcpu] == rcpu) { + if (cpu_logical_map(lcpu) == rcpu) { cpu_set(lcpu, core->mask); smp_cpu_polarization[lcpu] = tl_cpu->pp; } diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c index 10754a375668..cff327f109a8 100644 --- a/arch/s390/lib/spinlock.c +++ b/arch/s390/lib/spinlock.c @@ -34,7 +34,7 @@ static inline void _raw_yield_cpu(int cpu) { if (MACHINE_HAS_DIAG9C) asm volatile("diag %0,0,0x9c" - : : "d" (__cpu_logical_map[cpu])); + : : "d" (cpu_logical_map(cpu))); else _raw_yield(); } From a9df8e325d0de527c2e97297704ebbec48c01cbf Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 20:44:38 +0100 Subject: [PATCH 0817/1626] [S390] bug: implement arch specific __WARN macro This one will trap, generates shorter code and emits better debug data than the generic version. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/bug.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/s390/include/asm/bug.h b/arch/s390/include/asm/bug.h index efb74fd5156e..b1066b9fb5f8 100644 --- a/arch/s390/include/asm/bug.h +++ b/arch/s390/include/asm/bug.h @@ -52,6 +52,10 @@ unreachable(); \ } while (0) +#define __WARN() do { \ + __EMIT_BUG(BUGFLAG_WARNING); \ +} while (0) + #define WARN_ON(x) ({ \ int __ret_warn_on = !!(x); \ if (__builtin_constant_p(__ret_warn_on)) { \ From d381589834aa69f51f95b1e364fe79688692aab4 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 20:44:39 +0100 Subject: [PATCH 0818/1626] [S390] mmap: add missing compat_ptr conversion to both mmap compat syscalls Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/compat_linux.c | 41 +++++++++++++-------------------- 1 file changed, 16 insertions(+), 25 deletions(-) diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index 22c9e557bb22..11c3aba664ea 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -616,44 +616,35 @@ asmlinkage long sys32_fstatat64(unsigned int dfd, char __user *filename, */ struct mmap_arg_struct_emu31 { - u32 addr; - u32 len; - u32 prot; - u32 flags; - u32 fd; - u32 offset; + compat_ulong_t addr; + compat_ulong_t len; + compat_ulong_t prot; + compat_ulong_t flags; + compat_ulong_t fd; + compat_ulong_t offset; }; -asmlinkage unsigned long -old32_mmap(struct mmap_arg_struct_emu31 __user *arg) +asmlinkage unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg) { struct mmap_arg_struct_emu31 a; - int error = -EFAULT; if (copy_from_user(&a, arg, sizeof(a))) - goto out; - - error = -EINVAL; + return -EFAULT; if (a.offset & ~PAGE_MASK) - goto out; - - error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, - a.offset >> PAGE_SHIFT); -out: - return error; + return -EINVAL; + a.addr = (unsigned long) compat_ptr(a.addr); + return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, + a.offset >> PAGE_SHIFT); } -asmlinkage long -sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg) +asmlinkage long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg) { struct mmap_arg_struct_emu31 a; - int error = -EFAULT; if (copy_from_user(&a, arg, sizeof(a))) - goto out; - error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset); -out: - return error; + return -EFAULT; + a.addr = (unsigned long) compat_ptr(a.addr); + return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset); } asmlinkage long sys32_read(unsigned int fd, char __user * buf, size_t count) From f8b068593db4a4184c8963fcd5a7f34584fde8ad Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 20:44:40 +0100 Subject: [PATCH 0819/1626] [S390] dasd: add proper compat pointer conversion for symmetrix ioctl Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_eckd.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 5819dc02a143..1c500c462225 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -2844,13 +2845,16 @@ static int dasd_symm_io(struct dasd_device *device, void __user *argp) rc = -EFAULT; if (copy_from_user(&usrparm, argp, sizeof(usrparm))) goto out; -#ifndef CONFIG_64BIT - /* Make sure pointers are sane even on 31 bit. */ - if ((usrparm.psf_data >> 32) != 0 || (usrparm.rssd_result >> 32) != 0) { + if (is_compat_task() || sizeof(long) == 4) { + /* Make sure pointers are sane even on 31 bit. */ rc = -EINVAL; - goto out; + if ((usrparm.psf_data >> 32) != 0) + goto out; + if ((usrparm.rssd_result >> 32) != 0) + goto out; + usrparm.psf_data &= 0x7fffffffULL; + usrparm.rssd_result &= 0x7fffffffULL; } -#endif /* alloc I/O data area */ psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA); rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA); From 7b475d59a07cb193310afae48367bd1ea2faa411 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 20:44:41 +0100 Subject: [PATCH 0820/1626] [S390] con3215: remove empty ioctl function ...instead of adding a compat ioctl function which would do nothing as well. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/con3215.c | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index 9d61683b5633..59ec073724bf 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -1036,22 +1036,6 @@ static void tty3215_flush_buffer(struct tty_struct *tty) tty_wakeup(tty); } -/* - * Currently we don't have any io controls for 3215 ttys - */ -static int tty3215_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) -{ - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - switch (cmd) { - default: - return -ENOIOCTLCMD; - } - return 0; -} - /* * Disable reading from a 3215 tty */ @@ -1117,7 +1101,6 @@ static const struct tty_operations tty3215_ops = { .write_room = tty3215_write_room, .chars_in_buffer = tty3215_chars_in_buffer, .flush_buffer = tty3215_flush_buffer, - .ioctl = tty3215_ioctl, .throttle = tty3215_throttle, .unthrottle = tty3215_unthrottle, .stop = tty3215_stop, From 94e587f61ef5da3b4da40289cdb7e9a62d455313 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 20:44:42 +0100 Subject: [PATCH 0821/1626] [S390] unwire sys_recvmmsg again sys_recvmmsg is reachable via sys_socketcall. So unwire it again since there is no point in having two entry points for it. Also put it to the ignore list so we don't get reminded anymore in order to wire it up. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/unistd.h | 6 ++++-- arch/s390/kernel/compat_wrapper.S | 9 --------- arch/s390/kernel/syscalls.S | 1 - 3 files changed, 4 insertions(+), 12 deletions(-) diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h index 192a7203a14f..6e9f049fa823 100644 --- a/arch/s390/include/asm/unistd.h +++ b/arch/s390/include/asm/unistd.h @@ -269,8 +269,7 @@ #define __NR_pwritev 329 #define __NR_rt_tgsigqueueinfo 330 #define __NR_perf_event_open 331 -#define __NR_recvmmsg 332 -#define NR_syscalls 333 +#define NR_syscalls 332 /* * There are some system calls that are not present on 64 bit, some @@ -377,6 +376,9 @@ #define __IGNORE_migrate_pages #define __IGNORE_move_pages +/* Ignore system calls that are also reachable via sys_socket */ +#define __IGNORE_recvmmsg + #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_SYS_ALARM diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index faeaccc7d7d9..30de2d0e52bb 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1853,12 +1853,3 @@ sys32_execve_wrapper: llgtr %r3,%r3 # compat_uptr_t * llgtr %r4,%r4 # compat_uptr_t * jg sys32_execve # branch to system call - - .globl compat_sys_recvmmsg_wrapper -compat_sys_recvmmsg_wrapper: - lgfr %r2,%r2 # int - llgtr %r3,%r3 # struct compat_mmsghdr * - llgfr %r4,%r4 # unsigned int - llgfr %r5,%r5 # unsigned int - llgtr %r6,%r6 # struct compat_timespec * - jg compat_sys_recvmmsg diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index 4f292c936872..30eca070d426 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -340,4 +340,3 @@ SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper) SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper) SYSCALL(sys_rt_tgsigqueueinfo,sys_rt_tgsigqueueinfo,compat_sys_rt_tgsigqueueinfo_wrapper) /* 330 */ SYSCALL(sys_perf_event_open,sys_perf_event_open,sys_perf_event_open_wrapper) -SYSCALL(sys_recvmmsg,sys_recvmmsg,compat_sys_recvmmsg_wrapper) From 0648f5659e2d51659bd8f42ff30f456775c3c12d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 20:44:43 +0100 Subject: [PATCH 0822/1626] [S390] zcrypt: add sanity check before copy_from_user() It's not obvious that copy_from_user() is called with a sane length parameter here. Even though it currently seems to be correct better add a check to prevent stack corruption / exploits. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/zcrypt_api.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c index 0d4d18bdd45c..c68be24e27d9 100644 --- a/drivers/s390/crypto/zcrypt_api.c +++ b/drivers/s390/crypto/zcrypt_api.c @@ -393,10 +393,12 @@ static long zcrypt_rsa_crt(struct ica_rsa_modexpo_crt *crt) * u_mult_inv > 128 bytes. */ if (copied == 0) { - int len; + unsigned int len; spin_unlock_bh(&zcrypt_device_lock); /* len is max 256 / 2 - 120 = 8 */ len = crt->inputdatalength / 2 - 120; + if (len > sizeof(z1)) + return -EFAULT; z1 = z2 = z3 = 0; if (copy_from_user(&z1, crt->np_prime, len) || copy_from_user(&z2, crt->bp_key, len) || From c5406079780f0f687316732353f49c3357504428 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 20:44:44 +0100 Subject: [PATCH 0823/1626] [S390] tape_char: add missing compat_ptr conversion Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/tape_char.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c index 2125ec7d95f0..539045acaad4 100644 --- a/drivers/s390/char/tape_char.c +++ b/drivers/s390/char/tape_char.c @@ -18,6 +18,7 @@ #include #include #include +#include #include @@ -37,8 +38,9 @@ static ssize_t tapechar_write(struct file *, const char __user *, size_t, loff_t static int tapechar_open(struct inode *,struct file *); static int tapechar_release(struct inode *,struct file *); static long tapechar_ioctl(struct file *, unsigned int, unsigned long); -static long tapechar_compat_ioctl(struct file *, unsigned int, - unsigned long); +#ifdef CONFIG_COMPAT +static long tapechar_compat_ioctl(struct file *, unsigned int, unsigned long); +#endif static const struct file_operations tape_fops = { @@ -46,7 +48,9 @@ static const struct file_operations tape_fops = .read = tapechar_read, .write = tapechar_write, .unlocked_ioctl = tapechar_ioctl, +#ifdef CONFIG_COMPAT .compat_ioctl = tapechar_compat_ioctl, +#endif .open = tapechar_open, .release = tapechar_release, }; @@ -457,15 +461,22 @@ tapechar_ioctl(struct file *filp, unsigned int no, unsigned long data) return rc; } +#ifdef CONFIG_COMPAT static long tapechar_compat_ioctl(struct file *filp, unsigned int no, unsigned long data) { struct tape_device *device = filp->private_data; int rval = -ENOIOCTLCMD; + unsigned long argp; + /* The 'arg' argument of any ioctl function may only be used for + * pointers because of the compat pointer conversion. + * Consider this when adding new ioctls. + */ + argp = (unsigned long) compat_ptr(data); if (device->discipline->ioctl_fn) { mutex_lock(&device->mutex); - rval = device->discipline->ioctl_fn(device, no, data); + rval = device->discipline->ioctl_fn(device, no, argp); mutex_unlock(&device->mutex); if (rval == -EINVAL) rval = -ENOIOCTLCMD; @@ -473,6 +484,7 @@ tapechar_compat_ioctl(struct file *filp, unsigned int no, unsigned long data) return rval; } +#endif /* CONFIG_COMPAT */ /* * Initialize character device frontend. From cedabed49b39b4319bccc059a63344b6232b619c Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Wed, 13 Jan 2010 21:14:09 +0900 Subject: [PATCH 0824/1626] vfs: Fix vmtruncate() regression If __block_prepare_write() was failed in block_write_begin(), the allocated blocks can be outside of ->i_size. But new truncate_pagecache() in vmtuncate() does nothing if new < old. It means the above usage is not working anymore. So, this patch fixes it by removing "new < old" check. It would need more cleanup/change. But, now -rc and truncate working is in progress, so, this tried to fix it minimum change. Acked-by: Nick Piggin Signed-off-by: OGAWA Hirofumi Signed-off-by: Linus Torvalds --- mm/truncate.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/mm/truncate.c b/mm/truncate.c index 342deee22684..e87e37244829 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -522,22 +522,20 @@ EXPORT_SYMBOL_GPL(invalidate_inode_pages2); */ void truncate_pagecache(struct inode *inode, loff_t old, loff_t new) { - if (new < old) { - struct address_space *mapping = inode->i_mapping; + struct address_space *mapping = inode->i_mapping; - /* - * unmap_mapping_range is called twice, first simply for - * efficiency so that truncate_inode_pages does fewer - * single-page unmaps. However after this first call, and - * before truncate_inode_pages finishes, it is possible for - * private pages to be COWed, which remain after - * truncate_inode_pages finishes, hence the second - * unmap_mapping_range call must be made for correctness. - */ - unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1); - truncate_inode_pages(mapping, new); - unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1); - } + /* + * unmap_mapping_range is called twice, first simply for + * efficiency so that truncate_inode_pages does fewer + * single-page unmaps. However after this first call, and + * before truncate_inode_pages finishes, it is possible for + * private pages to be COWed, which remain after + * truncate_inode_pages finishes, hence the second + * unmap_mapping_range call must be made for correctness. + */ + unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1); + truncate_inode_pages(mapping, new); + unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1); } EXPORT_SYMBOL(truncate_pagecache); From 6846ee5ca68d81e6baccf0d56221d7a00c1be18b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 13 Jan 2010 16:19:34 +1100 Subject: [PATCH 0825/1626] zlib: Fix build of powerpc boot wrapper Commit ac4c2a3bbe5db5fc570b1d0ee1e474db7cb22585 broke the build of all powerpc boot wrappers. It attempts to add an include of autoconf.h but used the wrong path for it. It also adds -D__KERNEL__ to our boot wrapper, both things that we pretty much didn't do on purpose so far. We want our boot wrapper to remain independent enough of the kernel for various reasons, one of them being that you can "wrap" an existing kernel at distro install time which allows to ship one kernel image and a set of boot wrappers for different platforms, the wrappers don't have to be built out of the same kernel build tree. It's also incorrect to do what the patch does in our boot environment since we may not have a proper alignment exception handler which means we may not be able to fixup the few cases where an unaligned access will need SW emulation (depends on the core variant, could be when crossing page or segment boundaries for example). This patch fixes it by putting the old code back in and using the new "fancy" variant only when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set, which happens not to be set on powerpc since we don't include autoconf.h. It also reverts the changes to our boot wrapper Makefile. This means that x86 should, afaik, keep the optimisations since its boot wrapper does include autoconf.h and define __KERNEL__ (though I doubt they make that much different outside of slow embedded processors). Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/powerpc/boot/Makefile | 4 +--- lib/zlib_inflate/inffast.c | 32 ++++++++++++++++++++++++++++++-- 2 files changed, 31 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 826a30a00f59..bb2465bcb327 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -20,7 +20,7 @@ all: $(obj)/zImage BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ - -fno-strict-aliasing -Os -msoft-float -pipe -D__KERNEL__\ + -fno-strict-aliasing -Os -msoft-float -pipe \ -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \ -isystem $(shell $(CROSS32CC) -print-file-name=include) BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc @@ -34,8 +34,6 @@ BOOTCFLAGS += -fno-stack-protector endif BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -BOOTCFLAGS += -include include/linux/autoconf.h -Iarch/powerpc/include -BOOTCFLAGS += -Iinclude DTS_FLAGS ?= -p 1024 diff --git a/lib/zlib_inflate/inffast.c b/lib/zlib_inflate/inffast.c index 05e1559fa156..215447c55261 100644 --- a/lib/zlib_inflate/inffast.c +++ b/lib/zlib_inflate/inffast.c @@ -4,12 +4,25 @@ */ #include -#include -#include #include "inftrees.h" #include "inflate.h" #include "inffast.h" +/* Only do the unaligned "Faster" variant when + * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set + * + * On powerpc, it won't be as we don't include autoconf.h + * automatically for the boot wrapper, which is intended as + * we run in an environment where we may not be able to deal + * with (even rare) alignment faults. In addition, we do not + * define __KERNEL__ for arch/powerpc/boot unlike x86 + */ + +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS +#include +#include +#endif + #ifndef ASMINF /* Allow machine dependent optimization for post-increment or pre-increment. @@ -243,6 +256,7 @@ void inflate_fast(z_streamp strm, unsigned start) } } else { +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS unsigned short *sout; unsigned long loops; @@ -284,6 +298,20 @@ void inflate_fast(z_streamp strm, unsigned start) } if (len & 1) PUP(out) = PUP(from); +#else /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */ + from = out - dist; /* copy direct from output */ + do { /* minimum length is three */ + PUP(out) = PUP(from); + PUP(out) = PUP(from); + PUP(out) = PUP(from); + len -= 3; + } while (len > 2); + if (len) { + PUP(out) = PUP(from); + if (len > 1) + PUP(out) = PUP(from); + } +#endif /* !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */ } } else if ((op & 64) == 0) { /* 2nd level distance code */ From 1a647bd213d85c88507967104aea79b2649e6a6e Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 13 Jan 2010 01:49:13 +0000 Subject: [PATCH 0826/1626] ixgbe: Do not attempt to perform interrupts in netpoll when down This patch resolves issues seen when running netconsole and rebooting via reboot -f. The issue was due to the fact that we were attempting to perform interrupt actions when the q_vectors and rings had already been freed via the ixgbe_shutdown routines. Signed-off-by: Alexander Duyck Acked-by: Mallikarjuna R Chilakala Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 2ad754c864cf..385976709e76 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5576,6 +5576,10 @@ static void ixgbe_netpoll(struct net_device *netdev) struct ixgbe_adapter *adapter = netdev_priv(netdev); int i; + /* if interface is down do nothing */ + if (test_bit(__IXGBE_DOWN, &adapter->state)) + return; + adapter->flags |= IXGBE_FLAG_IN_NETPOLL; if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; From 8c47eaa76600cebc4869a42abb4568925ade6c47 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Wed, 13 Jan 2010 01:49:34 +0000 Subject: [PATCH 0827/1626] ixgbe: update copyright dates Signed-off-by: Shannon Nelson Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/Makefile | 2 +- drivers/net/ixgbe/ixgbe.h | 2 +- drivers/net/ixgbe/ixgbe_82598.c | 2 +- drivers/net/ixgbe/ixgbe_82599.c | 2 +- drivers/net/ixgbe/ixgbe_common.c | 2 +- drivers/net/ixgbe/ixgbe_common.h | 2 +- drivers/net/ixgbe/ixgbe_dcb.c | 2 +- drivers/net/ixgbe/ixgbe_dcb.h | 2 +- drivers/net/ixgbe/ixgbe_dcb_82598.c | 2 +- drivers/net/ixgbe/ixgbe_dcb_82598.h | 2 +- drivers/net/ixgbe/ixgbe_dcb_82599.c | 2 +- drivers/net/ixgbe/ixgbe_dcb_82599.h | 2 +- drivers/net/ixgbe/ixgbe_dcb_nl.c | 2 +- drivers/net/ixgbe/ixgbe_ethtool.c | 2 +- drivers/net/ixgbe/ixgbe_fcoe.c | 2 +- drivers/net/ixgbe/ixgbe_fcoe.h | 2 +- drivers/net/ixgbe/ixgbe_main.c | 4 ++-- drivers/net/ixgbe/ixgbe_phy.c | 2 +- drivers/net/ixgbe/ixgbe_phy.h | 2 +- drivers/net/ixgbe/ixgbe_type.h | 2 +- 20 files changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile index 21b41f42b61c..bfef0ebcba9a 100644 --- a/drivers/net/ixgbe/Makefile +++ b/drivers/net/ixgbe/Makefile @@ -1,7 +1,7 @@ ################################################################################ # # Intel 10 Gigabit PCI Express Linux driver -# Copyright(c) 1999 - 2009 Intel Corporation. +# Copyright(c) 1999 - 2010 Intel Corporation. # # This program is free software; you can redistribute it and/or modify it # under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index 8da8eb535084..303e7bd39b67 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 204177d78cec..3103f4165311 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 538340527aa6..b49bd6b9feb7 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index 688b8ca5da32..21f158f79dd0 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h index 27f3214bed2e..dfff0ffaa502 100644 --- a/drivers/net/ixgbe/ixgbe_common.h +++ b/drivers/net/ixgbe/ixgbe_common.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb.c b/drivers/net/ixgbe/ixgbe_dcb.c index a1562287342f..9aea4f04bbd2 100644 --- a/drivers/net/ixgbe/ixgbe_dcb.c +++ b/drivers/net/ixgbe/ixgbe_dcb.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb.h b/drivers/net/ixgbe/ixgbe_dcb.h index 64a9fa15c059..5caafd4afbc3 100644 --- a/drivers/net/ixgbe/ixgbe_dcb.h +++ b/drivers/net/ixgbe/ixgbe_dcb.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ixgbe/ixgbe_dcb_82598.c index f30263898ebc..f0e9279d4669 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82598.c +++ b/drivers/net/ixgbe/ixgbe_dcb_82598.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.h b/drivers/net/ixgbe/ixgbe_dcb_82598.h index ebbe53c352a7..cc728fa092e2 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82598.h +++ b/drivers/net/ixgbe/ixgbe_dcb_82598.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c index ec8a252636d3..4f7a26ab411e 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82599.c +++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ixgbe/ixgbe_dcb_82599.h index 9e5e2827e4af..0f3f791e1e1d 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82599.h +++ b/drivers/net/ixgbe/ixgbe_dcb_82599.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index 3c7a79a7d7c6..56f37f66b696 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 0bd49d3b9f65..d77961fc75f9 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c index da32a108a7b4..e9a20c88c155 100644 --- a/drivers/net/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ixgbe/ixgbe_fcoe.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ixgbe/ixgbe_fcoe.h index de8ff53187da..abf4b2b3f252 100644 --- a/drivers/net/ixgbe/ixgbe_fcoe.h +++ b/drivers/net/ixgbe/ixgbe_fcoe.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 385976709e76..9c9202f40b10 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -52,7 +52,7 @@ static const char ixgbe_driver_string[] = #define DRV_VERSION "2.0.44-k2" const char ixgbe_driver_version[] = DRV_VERSION; -static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation."; +static char ixgbe_copyright[] = "Copyright (c) 1999-2010 Intel Corporation."; static const struct ixgbe_info *ixgbe_info_tbl[] = { [board_82598] = &ixgbe_82598_info, diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 9ecad17522c3..1c1efd386956 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h index 9b700f5bf1ed..9cf5f3b4cc5d 100644 --- a/drivers/net/ixgbe/ixgbe_phy.h +++ b/drivers/net/ixgbe/ixgbe_phy.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 84650c6ebe03..9eafddfa1b97 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2009 Intel Corporation. + Copyright(c) 1999 - 2010 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, From fddaa1aff881c98f524221236af98ce70dcd04cf Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 13 Jan 2010 01:52:49 +0000 Subject: [PATCH 0828/1626] e1000e: MDIO slow mode should always be done for 82577 A previous 82577 workaround that set the MDIO access speed to slow mode for every PHY register read/write when the cable is unplugged should instead set the access mode to always be slow before any PHY register access. Since the mode bit gets cleared when the PHY is reset, set the mode after every PHY reset. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/e1000.h | 1 - drivers/net/e1000e/ich8lan.c | 57 ++++++++++++++++++++++-- drivers/net/e1000e/phy.c | 85 ------------------------------------ 3 files changed, 53 insertions(+), 90 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index cebbd9079d53..d6ee28f6ea08 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -582,7 +582,6 @@ extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data); extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data); -extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow); extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw); extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw); extern s32 e1000_check_polarity_82577(struct e1000_hw *hw); diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index ad08cf3f40c0..c2ea86197503 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -138,6 +138,10 @@ #define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ #define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ +/* KMRN Mode Control */ +#define HV_KMRN_MODE_CTRL PHY_REG(769, 16) +#define HV_KMRN_MDIO_SLOW 0x0400 + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -219,6 +223,7 @@ static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw); static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); +static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -270,7 +275,21 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->id = e1000_phy_unknown; - e1000e_get_phy_id(hw); + ret_val = e1000e_get_phy_id(hw); + if (ret_val) + goto out; + if ((phy->id == 0) || (phy->id == PHY_REVISION_MASK)) { + /* + * In case the PHY needs to be in mdio slow mode (eg. 82577), + * set slow mode and try to get the PHY id again. + */ + ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (ret_val) + goto out; + ret_val = e1000e_get_phy_id(hw); + if (ret_val) + goto out; + } phy->type = e1000e_get_phy_type_from_id(phy->id); switch (phy->type) { @@ -292,6 +311,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) break; } +out: return ret_val; } @@ -1075,6 +1095,26 @@ out: } +/** + * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode + * @hw: pointer to the HW structure + **/ +static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw) +{ + s32 ret_val; + u16 data; + + ret_val = e1e_rphy(hw, HV_KMRN_MODE_CTRL, &data); + if (ret_val) + return ret_val; + + data |= HV_KMRN_MDIO_SLOW; + + ret_val = e1e_wphy(hw, HV_KMRN_MODE_CTRL, data); + + return ret_val; +} + /** * e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be * done after every PHY reset. @@ -1086,6 +1126,13 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) if (hw->mac.type != e1000_pchlan) return ret_val; + /* Set MDIO slow mode before any other MDIO access */ + if (hw->phy.type == e1000_phy_82577) { + ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (ret_val) + goto out; + } + if (((hw->phy.type == e1000_phy_82577) && ((hw->phy.revision == 1) || (hw->phy.revision == 2))) || ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) { @@ -1184,6 +1231,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) /* Allow time for h/w to get to a quiescent state after reset */ mdelay(10); + /* Perform any necessary post-reset workarounds */ if (hw->mac.type == e1000_pchlan) { ret_val = e1000_hv_phy_workarounds_ich8lan(hw); if (ret_val) @@ -2484,6 +2532,10 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) if (!ret_val) e1000_release_swflag_ich8lan(hw); + /* Perform any necessary post-reset workarounds */ + if (hw->mac.type == e1000_pchlan) + ret_val = e1000_hv_phy_workarounds_ich8lan(hw); + if (ctrl & E1000_CTRL_PHY_RST) ret_val = hw->phy.ops.get_cfg_done(hw); @@ -2528,9 +2580,6 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) kab |= E1000_KABGTXD_BGSQLBIAS; ew32(KABGTXD, kab); - if (hw->mac.type == e1000_pchlan) - ret_val = e1000_hv_phy_workarounds_ich8lan(hw); - out: return ret_val; } diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 55a2c0acfee7..7f3ceb9dad6a 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -152,32 +152,9 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) if (phy->id != 0 && phy->id != PHY_REVISION_MASK) goto out; - /* - * If the PHY ID is still unknown, we may have an 82577 - * without link. We will try again after setting Slow MDIC - * mode. No harm in trying again in this case since the PHY - * ID is unknown at this point anyway. - */ - ret_val = phy->ops.acquire(hw); - if (ret_val) - goto out; - ret_val = e1000_set_mdio_slow_mode_hv(hw, true); - if (ret_val) - goto out; - phy->ops.release(hw); - retry_count++; } out: - /* Revert to MDIO fast mode, if applicable */ - if (retry_count) { - ret_val = phy->ops.acquire(hw); - if (ret_val) - return ret_val; - ret_val = e1000_set_mdio_slow_mode_hv(hw, false); - phy->ops.release(hw); - } - return ret_val; } @@ -2790,38 +2767,6 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) return 0; } -/** - * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode - * @hw: pointer to the HW structure - * @slow: true for slow mode, false for normal mode - * - * Assumes semaphore already acquired. - **/ -s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow) -{ - s32 ret_val = 0; - u16 data = 0; - - /* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */ - hw->phy.addr = 1; - ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, - (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT)); - if (ret_val) - goto out; - - ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1, - (0x2180 | (slow << 10))); - if (ret_val) - goto out; - - /* dummy read when reverting to fast mode - throw away result */ - if (!slow) - ret_val = e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data); - -out: - return ret_val; -} - /** * __e1000_read_phy_reg_hv - Read HV PHY register * @hw: pointer to the HW structure @@ -2839,7 +2784,6 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, s32 ret_val; u16 page = BM_PHY_REG_PAGE(offset); u16 reg = BM_PHY_REG_NUM(offset); - bool in_slow_mode = false; if (!locked) { ret_val = hw->phy.ops.acquire(hw); @@ -2847,16 +2791,6 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, return ret_val; } - /* Workaround failure in MDIO access while cable is disconnected */ - if ((hw->phy.type == e1000_phy_82577) && - !(er32(STATUS) & E1000_STATUS_LU)) { - ret_val = e1000_set_mdio_slow_mode_hv(hw, true); - if (ret_val) - goto out; - - in_slow_mode = true; - } - /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, @@ -2893,10 +2827,6 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data); out: - /* Revert to MDIO fast mode, if applicable */ - if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); - if (!locked) hw->phy.ops.release(hw); @@ -2948,7 +2878,6 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, s32 ret_val; u16 page = BM_PHY_REG_PAGE(offset); u16 reg = BM_PHY_REG_NUM(offset); - bool in_slow_mode = false; if (!locked) { ret_val = hw->phy.ops.acquire(hw); @@ -2956,16 +2885,6 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, return ret_val; } - /* Workaround failure in MDIO access while cable is disconnected */ - if ((hw->phy.type == e1000_phy_82577) && - !(er32(STATUS) & E1000_STATUS_LU)) { - ret_val = e1000_set_mdio_slow_mode_hv(hw, true); - if (ret_val) - goto out; - - in_slow_mode = true; - } - /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, @@ -3019,10 +2938,6 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, data); out: - /* Revert to MDIO fast mode, if applicable */ - if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); - if (!locked) hw->phy.ops.release(hw); From baf86c9d36826fab0160251bbc87dfab3af48a21 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 13 Jan 2010 01:53:08 +0000 Subject: [PATCH 0829/1626] e1000e: workaround link issues on busy hub in half duplex on 82577/82578 This patch removes a delay in hardware after every received packet allowing more time for transmitted packets to go out in between received packets in half duplex. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index c2ea86197503..8b6ecd127889 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1122,6 +1122,7 @@ static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw) static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) { s32 ret_val = 0; + u16 phy_data; if (hw->mac.type != e1000_pchlan) return ret_val; @@ -1165,16 +1166,32 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) hw->phy.addr = 1; ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0); + hw->phy.ops.release(hw); if (ret_val) goto out; - hw->phy.ops.release(hw); /* * Configure the K1 Si workaround during phy reset assuming there is * link so that it disables K1 if link is in 1Gbps. */ ret_val = e1000_k1_gig_workaround_hv(hw, true); + if (ret_val) + goto out; + /* Workaround for link disconnects on a busy hub in half duplex */ + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + ret_val = hw->phy.ops.read_reg_locked(hw, + PHY_REG(BM_PORT_CTRL_PAGE, 17), + &phy_data); + if (ret_val) + goto release; + ret_val = hw->phy.ops.write_reg_locked(hw, + PHY_REG(BM_PORT_CTRL_PAGE, 17), + phy_data & 0x00FF); +release: + hw->phy.ops.release(hw); out: return ret_val; } From 55029c1d65158aea9672c5dfadb43a57f23e3100 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 13 Jan 2010 04:34:25 +0000 Subject: [PATCH 0830/1626] sfc: Fix polling for slow MCDI operations When the interface is down and we are using polled mode for MCDI operations, we busy-wait for completion for approximately 1 jiffy using udelay() and then back off to schedule(). But the completion will not wake the task, since we are using polled mode! We must use schedule_timeout_uninterruptible() instead. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/mcdi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c index 683353b904c7..0d4eba7266ec 100644 --- a/drivers/net/sfc/mcdi.c +++ b/drivers/net/sfc/mcdi.c @@ -142,8 +142,9 @@ static int efx_mcdi_poll(struct efx_nic *efx) if (spins != 0) { --spins; udelay(1); - } else - schedule(); + } else { + schedule_timeout_uninterruptible(1); + } time = get_seconds(); From f3766c26a5d00189e5c0965c66f01956d15a92d6 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 13 Jan 2010 10:59:13 +0000 Subject: [PATCH 0831/1626] sfc: Fix conditions for MDIO self-test The MDIO self-test should not be run on boards without an MDIO PHY, such as SFN5122F-R3 and later revisions. It should also not try to address a specific MMD in an MDIO clause 22 PHY. Check the mode_support field to decide which mode to use, if any. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/selftest.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c index af3933579790..250c8827b842 100644 --- a/drivers/net/sfc/selftest.c +++ b/drivers/net/sfc/selftest.c @@ -79,10 +79,14 @@ struct efx_loopback_state { static int efx_test_mdio(struct efx_nic *efx, struct efx_self_tests *tests) { int rc = 0; - int devad = __ffs(efx->mdio.mmds); + int devad; u16 physid1, physid2; - if (efx->phy_type == PHY_TYPE_NONE) + if (efx->mdio.mode_support & MDIO_SUPPORTS_C45) + devad = __ffs(efx->mdio.mmds); + else if (efx->mdio.mode_support & MDIO_SUPPORTS_C22) + devad = MDIO_DEVAD_NONE; + else return 0; mutex_lock(&efx->mac_lock); From 13fa95b0398d65885a79c6e95a09976ee9f8c009 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 12 Jan 2010 10:11:36 +0000 Subject: [PATCH 0832/1626] tg3: Fix std prod ring nicaddr for 5787 and 57765 Commit 87668d352aa8d135bd695a050f18bbfc7b50b506, titled "tg3: Don't touch RCB nic addresses", tried to avoid assigning the nic address of the standard producer ring. Unfortunately, the default nic address is not correct for the 5787, the 5755M, or the 57765. This patch reenables the old behavior and opts out of the assignment only for the 5717. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Tested-by: Chow Loong Jin Tested-by: Dmitry Torokhov Signed-off-by: David S. Miller --- drivers/net/tg3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 3a74d2168598..5c77e6a48705 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7742,7 +7742,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) ((u64) tpr->rx_std_mapping >> 32)); tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW, ((u64) tpr->rx_std_mapping & 0xffffffff)); - if (!(tp->tg3_flags3 & TG3_FLG3_5755_PLUS)) + if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717) tw32(RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR, NIC_SRAM_RX_BUFFER_DESC); From 86cfe4ff02a51294cb2c974a8bedc7f648491df9 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 12 Jan 2010 10:11:37 +0000 Subject: [PATCH 0833/1626] tg3: Fix std rx prod ring handling There are some tg3 devices that require the driver to post new rx buffers in smaller increments. Commit 4361935afe3abc3e5a93006b99197fac1fabbd50, "tg3: Consider rx_std_prod_idx a hw mailbox" changed how the driver tracks the rx producer ring updates, but it does not make any special considerations for the above-mentioned devices. For those devices, it is possible for the driver to hit the special case path, which updates the hardware mailbox register but skips updating the shadow software mailbox member. If the special case path represents the final mailbox update for this ISR iteration, the hardware and software mailbox values will be out of sync. Ultimately, this will cause the driver to use a stale mailbox value on the next iteration, which will appear to the hardware as a large rx buffer update. Bad things ensue. The fix is to update the software shadow mailbox member when the special case path is taken. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Reported-by: Dmitry Torokhov Signed-off-by: David S. Miller --- drivers/net/tg3.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 5c77e6a48705..4e8b87d1ffa9 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -4693,8 +4693,9 @@ next_pkt: (*post_ptr)++; if (unlikely(rx_std_posted >= tp->rx_std_max_post)) { - u32 idx = *post_ptr % TG3_RX_RING_SIZE; - tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG, idx); + tpr->rx_std_prod_idx = std_prod_idx % TG3_RX_RING_SIZE; + tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG, + tpr->rx_std_prod_idx); work_mask &= ~RXD_OPAQUE_RING_STD; rx_std_posted = 0; } From d1ec96af77df611d1728f3bb70289f83a02df1ea Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 12 Jan 2010 10:11:38 +0000 Subject: [PATCH 0834/1626] tg3: Add reliable serdes detection for 5717 A0 The serdes status bit does not work as intended for the 5717 A0. This patch implements an alternative detection scheme that will only be valid for A0 revisions. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 9 +++++++-- drivers/net/tg3.h | 2 ++ 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 4e8b87d1ffa9..0a632f96d16b 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1037,7 +1037,11 @@ static void tg3_mdio_start(struct tg3 *tp) else tp->phy_addr = 1; - is_serdes = tr32(SG_DIG_STATUS) & SG_DIG_IS_SERDES; + if (tp->pci_chip_rev_id != CHIPREV_ID_5717_A0) + is_serdes = tr32(SG_DIG_STATUS) & SG_DIG_IS_SERDES; + else + is_serdes = tr32(TG3_CPMU_PHY_STRAP) & + TG3_CPMU_PHY_STRAP_IS_SERDES; if (is_serdes) tp->phy_addr += 7; } else @@ -12123,7 +12127,8 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) tp->phy_id = eeprom_phy_id; if (eeprom_phy_serdes) { - if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) + if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) tp->tg3_flags2 |= TG3_FLG2_MII_SERDES; else tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES; diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index cd30889650f8..43ed41b9f559 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -1054,6 +1054,8 @@ #define CPMU_MUTEX_REQ_DRIVER 0x00001000 #define TG3_CPMU_MUTEX_GNT 0x00003660 #define CPMU_MUTEX_GNT_DRIVER 0x00001000 +#define TG3_CPMU_PHY_STRAP 0x00003664 +#define TG3_CPMU_PHY_STRAP_IS_SERDES 0x00000020 /* 0x3664 --> 0x3800 unused */ /* Mbuf cluster free registers */ From 55dffe79b34e2af98bd1315f1e00c2fc6a7a7078 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 12 Jan 2010 10:11:39 +0000 Subject: [PATCH 0835/1626] tg3: Disable 5717 serdes and B0 support The B0 revision of the 5717 will not get enough testing by the time 2.6.33 ships. Since the kernel is already at RC3, serdes support will require too many patches to fix. For these reasons, this patch disables 5717 serdes support and will refuse to attach to all 5717 devices that are later than an A0 revision. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 0a632f96d16b..2d1a7404057b 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -13390,6 +13390,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (err) return err; + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 && + (tp->pci_chip_rev_id != CHIPREV_ID_5717_A0 || + (tp->tg3_flags2 & TG3_FLG2_MII_SERDES))) + return -ENOTSUPP; + /* Initialize data/descriptor byte/word swapping. */ val = tr32(GRC_MODE); val &= GRC_MODE_HOST_STACKUP; From ba5b0bfa06b6fbee03c6889046e9adcefa5d2c20 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 12 Jan 2010 10:11:40 +0000 Subject: [PATCH 0836/1626] tg3: Update copyright and driver version This patch updates the copyright notice for 2010 and updates the version number to 3.106. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 6 +++--- drivers/net/tg3.h | 1 + 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 2d1a7404057b..7f82b0238e08 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -4,7 +4,7 @@ * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com) * Copyright (C) 2001, 2002, 2003 Jeff Garzik (jgarzik@pobox.com) * Copyright (C) 2004 Sun Microsystems Inc. - * Copyright (C) 2005-2009 Broadcom Corporation. + * Copyright (C) 2005-2010 Broadcom Corporation. * * Firmware is: * Derived from proprietary unpublished source code, @@ -68,8 +68,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.105" -#define DRV_MODULE_RELDATE "December 2, 2009" +#define DRV_MODULE_VERSION "3.106" +#define DRV_MODULE_RELDATE "January 12, 2010" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 43ed41b9f559..8a167912902b 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -4,6 +4,7 @@ * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com) * Copyright (C) 2001 Jeff Garzik (jgarzik@pobox.com) * Copyright (C) 2004 Sun Microsystems Inc. + * Copyright (C) 2007-2010 Broadcom Corporation. */ #ifndef _T3_H From 2570a4f5428bcdb1077622342181755741e7fa60 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 13 Jan 2010 17:27:37 -0800 Subject: [PATCH 0837/1626] ipv6: skb_dst() can be NULL in ipv6_hop_jumbo(). This fixes CERT-FI FICORA #341748 Discovered by Olli Jarva and Tuomo Untinen from the CROSS project at Codenomicon Ltd. Just like in CVE-2007-4567, we can't rely upon skb_dst() being non-NULL at this point. We fixed that in commit e76b2b2567b83448c2ee85a896433b96150c92e6 ("[IPV6]: Do no rely on skb->dst before it is assigned.") However commit 483a47d2fe794328d29950fe00ce26dd405d9437 ("ipv6: added net argument to IP6_INC_STATS_BH") put a new version of the same bug into this function. Complicating analysis further, this bug can only trigger when network namespaces are enabled in the build. When namespaces are turned off, the dev_net() does not evaluate it's argument, so the dereference would not occur. So, for a long time, namespaces couldn't be turned on unless SYSFS was disabled. Therefore, this code has largely been disabled except by people turning it on explicitly for namespace development. With help from Eugene Teo Signed-off-by: David S. Miller --- net/ipv6/exthdrs.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c index df159fffe4bc..4bac362b1335 100644 --- a/net/ipv6/exthdrs.c +++ b/net/ipv6/exthdrs.c @@ -559,6 +559,11 @@ static inline struct inet6_dev *ipv6_skb_idev(struct sk_buff *skb) return skb_dst(skb) ? ip6_dst_idev(skb_dst(skb)) : __in6_dev_get(skb->dev); } +static inline struct net *ipv6_skb_net(struct sk_buff *skb) +{ + return skb_dst(skb) ? dev_net(skb_dst(skb)->dev) : dev_net(skb->dev); +} + /* Router Alert as of RFC 2711 */ static int ipv6_hop_ra(struct sk_buff *skb, int optoff) @@ -580,8 +585,8 @@ static int ipv6_hop_ra(struct sk_buff *skb, int optoff) static int ipv6_hop_jumbo(struct sk_buff *skb, int optoff) { const unsigned char *nh = skb_network_header(skb); + struct net *net = ipv6_skb_net(skb); u32 pkt_len; - struct net *net = dev_net(skb_dst(skb)->dev); if (nh[optoff + 1] != 4 || (optoff & 3) != 2) { LIMIT_NETDEBUG(KERN_DEBUG "ipv6_hop_jumbo: wrong jumbo opt length/alignment %d\n", From 7a15cbd40108a670baae71cbd3cec62b65891fa6 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 14 Jan 2010 11:42:17 +1000 Subject: [PATCH 0838/1626] drm/radeon/kms: fix displayport->dvi connector DDC. It appears that attempting AUXCH DDC breaks the subsequent attempt to do DDC over the i2c lines, so use the sink type to determine if we should be doing AUXCH or i2c DDC. This fixes my DVI monitor plugged into DP->DVI convertor. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 0ec491ead2ff..47ceae9cdc43 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -357,7 +357,8 @@ int radeon_ddc_get_modes(struct radeon_connector *radeon_connector) if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) || (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) { struct radeon_connector_atom_dig *dig = radeon_connector->con_priv; - if (dig->dp_i2c_bus) + if ((dig->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT || + dig->dp_sink_type == CONNECTOR_OBJECT_ID_eDP) && dig->dp_i2c_bus) radeon_connector->edid = drm_get_edid(&radeon_connector->base, &dig->dp_i2c_bus->adapter); } if (!radeon_connector->ddc_bus) From 6398d42454ce1671b3422c34fd0f600c9c76c8b1 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Wed, 13 Jan 2010 12:32:36 +0100 Subject: [PATCH 0839/1626] drm/radeon/kms: Do not unpin buffer in fb destruction It's not necessary to unpin buffer in fb destruction. pin/unpin need to be balanced and we don't pin in fb creation. We pin when an fb is associated to a crtc and unpin when the fb is disassociated from the crtc. Note: Maybe we should take reference on fb in set_base callback so fb doesn't disappear until it's unbind from ctrc. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 47ceae9cdc43..49f3c69cf240 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -668,7 +668,6 @@ static void radeon_user_framebuffer_destroy(struct drm_framebuffer *fb) radeonfb_remove(dev, fb); if (radeon_fb->obj) { - radeon_gem_object_unpin(radeon_fb->obj); mutex_lock(&dev->struct_mutex); drm_gem_object_unreference(radeon_fb->obj); mutex_unlock(&dev->struct_mutex); From 30d2d9a54d48e4fefede0389ded1b6fc2d44a522 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Wed, 13 Jan 2010 10:29:27 +0100 Subject: [PATCH 0840/1626] drm/radeon/kms: Fix r600 blit cleanup path r600 blit cleanup path need to check if a bo was allocated before trying to free or unpin it. This patch add this check and avoid oops when the initialization on r6xx or r7xx hw fails. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 12 +++++++----- drivers/gpu/drm/radeon/r600_blit_kms.c | 14 ++++++++------ drivers/gpu/drm/radeon/rv770.c | 10 ++++++---- 3 files changed, 21 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 9757962146fb..3e02dd403d77 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1961,11 +1961,13 @@ int r600_suspend(struct radeon_device *rdev) r600_wb_disable(rdev); r600_pcie_gart_disable(rdev); /* unpin shaders bo */ - r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); - if (unlikely(r != 0)) - return r; - radeon_bo_unpin(rdev->r600_blit.shader_obj); - radeon_bo_unreserve(rdev->r600_blit.shader_obj); + if (rdev->r600_blit.shader_obj) { + r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); + if (!r) { + radeon_bo_unpin(rdev->r600_blit.shader_obj); + radeon_bo_unreserve(rdev->r600_blit.shader_obj); + } + } return 0; } diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index 8787ea89dc6e..2bedce477a97 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -512,14 +512,16 @@ void r600_blit_fini(struct radeon_device *rdev) { int r; + if (rdev->r600_blit.shader_obj == NULL) + return; + /* If we can't reserve the bo, unref should be enough to destroy + * it when it becomes idle. + */ r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); - if (unlikely(r != 0)) { - dev_err(rdev->dev, "(%d) can't finish r600 blit\n", r); - goto out_unref; + if (!r) { + radeon_bo_unpin(rdev->r600_blit.shader_obj); + radeon_bo_unreserve(rdev->r600_blit.shader_obj); } - radeon_bo_unpin(rdev->r600_blit.shader_obj); - radeon_bo_unreserve(rdev->r600_blit.shader_obj); -out_unref: radeon_bo_unref(&rdev->r600_blit.shader_obj); } diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 16f7317fa1af..7f17ddf1f45f 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -975,10 +975,12 @@ int rv770_suspend(struct radeon_device *rdev) r600_wb_disable(rdev); rv770_pcie_gart_disable(rdev); /* unpin shaders bo */ - r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); - if (likely(r == 0)) { - radeon_bo_unpin(rdev->r600_blit.shader_obj); - radeon_bo_unreserve(rdev->r600_blit.shader_obj); + if (rdev->r600_blit.shader_obj) { + r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); + if (likely(r == 0)) { + radeon_bo_unpin(rdev->r600_blit.shader_obj); + radeon_bo_unreserve(rdev->r600_blit.shader_obj); + } } return 0; } From 0a3f316370da07fcdb11fde4f5a683d60713b7fd Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Wed, 13 Jan 2010 15:16:39 +0100 Subject: [PATCH 0841/1626] drm/radeon/kms: Disable AGP is aperture size < 32M radeon KMS need a GART of at least 32M to properly work. This patch check the AGP aperture size and disable if it's less than 32M. Note than unlike non KMS path we don't staticaly allocate AGP memory so we are not wasting memory not used by graphic processing. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_agp.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c index 220f454ea9fa..c9ad7f5cc1ac 100644 --- a/drivers/gpu/drm/radeon/radeon_agp.c +++ b/drivers/gpu/drm/radeon/radeon_agp.c @@ -133,6 +133,13 @@ int radeon_agp_init(struct radeon_device *rdev) bool is_v3; int ret; + if (rdev->ddev->agp->agp_info.aper_size < 32) { + dev_warn(rdev->dev, "AGP aperture to small (%dM) " + "need at least 32M, disabling AGP\n", + rdev->ddev->agp->agp_info.aper_size); + return -EINVAL; + } + /* Acquire AGP. */ if (!rdev->ddev->agp->acquired) { ret = drm_agp_acquire(rdev->ddev); From 700a0cc088a42a2ed92c6f961534fdb38588af87 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Wed, 13 Jan 2010 15:16:38 +0100 Subject: [PATCH 0842/1626] drm/radeon/kms: Use radeon_agp_disable when disabling AGP Use same common function to disable agp so we replace the GART callback by the proper one when we do so. This fix oops if radeon_agp_init report failure. This patch also move radeon_agp_init out of *_mc_init for r600 & rv770 so that we can have a similar behavior than for previous hw, ie if agp_init fails it will fallback to GPU GART and disable AGP. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 4 +--- drivers/gpu/drm/radeon/r420.c | 4 +--- drivers/gpu/drm/radeon/r600.c | 9 +++++---- drivers/gpu/drm/radeon/radeon.h | 2 ++ drivers/gpu/drm/radeon/radeon_device.c | 1 + drivers/gpu/drm/radeon/rv770.c | 9 +++++---- 6 files changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 8760d66e058a..62b27bede651 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3399,9 +3399,7 @@ int r100_mc_init(struct radeon_device *rdev) if (rdev->flags & RADEON_IS_AGP) { r = radeon_agp_init(rdev); if (r) { - printk(KERN_WARNING "[drm] Disabling AGP\n"); - rdev->flags &= ~RADEON_IS_AGP; - rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; + radeon_agp_disable(rdev); } else { rdev->mc.gtt_location = rdev->mc.agp_base; } diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index 053404e71a9d..4526faaacca8 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -50,9 +50,7 @@ int r420_mc_init(struct radeon_device *rdev) if (rdev->flags & RADEON_IS_AGP) { r = radeon_agp_init(rdev); if (r) { - printk(KERN_WARNING "[drm] Disabling AGP\n"); - rdev->flags &= ~RADEON_IS_AGP; - rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; + radeon_agp_disable(rdev); } else { rdev->mc.gtt_location = rdev->mc.agp_base; } diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 3e02dd403d77..b3713f61964c 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -624,7 +624,6 @@ int r600_mc_init(struct radeon_device *rdev) fixed20_12 a; u32 tmp; int chansize, numchan; - int r; /* Get VRAM informations */ rdev->mc.vram_is_ddr = true; @@ -667,9 +666,6 @@ int r600_mc_init(struct radeon_device *rdev) rdev->mc.real_vram_size = rdev->mc.aper_size; if (rdev->flags & RADEON_IS_AGP) { - r = radeon_agp_init(rdev); - if (r) - return r; /* gtt_size is setup by radeon_agp_init */ rdev->mc.gtt_location = rdev->mc.agp_base; tmp = 0xFFFFFFFFUL - rdev->mc.agp_base - rdev->mc.gtt_size; @@ -2028,6 +2024,11 @@ int r600_init(struct radeon_device *rdev) r = radeon_fence_driver_init(rdev); if (r) return r; + if (rdev->flags & RADEON_IS_AGP) { + r = radeon_agp_init(rdev); + if (r) + radeon_agp_disable(rdev); + } r = r600_mc_init(rdev); if (r) return r; diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index eb5f99b9469d..ab37dd0f2e71 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1017,6 +1017,8 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v) #define radeon_hpd_set_polarity(rdev, hpd) (rdev)->asic->hpd_set_polarity((rdev), (hpd)) /* Common functions */ +/* AGP */ +extern void radeon_agp_disable(struct radeon_device *rdev); extern int radeon_gart_table_vram_pin(struct radeon_device *rdev); extern int radeon_modeset_init(struct radeon_device *rdev); extern void radeon_modeset_fini(struct radeon_device *rdev); diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 0c51f8e46613..768b1509fa03 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -544,6 +544,7 @@ void radeon_agp_disable(struct radeon_device *rdev) rdev->asic->gart_tlb_flush = &r100_pci_gart_tlb_flush; rdev->asic->gart_set_page = &r100_pci_gart_set_page; } + rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; } void radeon_check_arguments(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 7f17ddf1f45f..eb065bbe1eeb 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -779,7 +779,6 @@ int rv770_mc_init(struct radeon_device *rdev) fixed20_12 a; u32 tmp; int chansize, numchan; - int r; /* Get VRAM informations */ rdev->mc.vram_is_ddr = true; @@ -822,9 +821,6 @@ int rv770_mc_init(struct radeon_device *rdev) rdev->mc.real_vram_size = rdev->mc.aper_size; if (rdev->flags & RADEON_IS_AGP) { - r = radeon_agp_init(rdev); - if (r) - return r; /* gtt_size is setup by radeon_agp_init */ rdev->mc.gtt_location = rdev->mc.agp_base; tmp = 0xFFFFFFFFUL - rdev->mc.agp_base - rdev->mc.gtt_size; @@ -1039,6 +1035,11 @@ int rv770_init(struct radeon_device *rdev) r = radeon_fence_driver_init(rdev); if (r) return r; + if (rdev->flags & RADEON_IS_AGP) { + r = radeon_agp_init(rdev); + if (r) + radeon_agp_disable(rdev); + } r = rv770_mc_init(rdev); if (r) return r; From cd65c3c7d1081290b7365897c2290a84aa967d4d Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Wed, 13 Jan 2010 18:10:36 -0800 Subject: [PATCH 0843/1626] net: fix build erros with CONFIG_BUG=n, CONFIG_GENERIC_BUG=n Fixed build errors introduced by commit 7ad6848c (ip: fix mc_loop checks for tunnels with multicast outer addresses) Signed-off-by: Octavian Purdila Signed-off-by: David S. Miller --- include/net/ip.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/ip.h b/include/net/ip.h index d9a0e74d8923..fb63371c07a8 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -338,7 +338,7 @@ static inline int sk_mc_loop(struct sock *sk) return inet6_sk(sk)->mc_loop; #endif } - __WARN(); + WARN_ON(1); return 1; } From df1c93bae2b671e2aa50899a120af20afdbd504b Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 13 Jan 2010 22:28:36 +0100 Subject: [PATCH 0844/1626] drm/vmwgfx: Don't promote updates from GMR-backed scanouts to fullscreen. That's unnecessary since partial screen updates from GMRs are fast. Also fix cliprect pointer dereferencing Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index b1af76e371c3..686692de209a 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -553,9 +553,7 @@ int vmw_framebuffer_dmabuf_dirty(struct drm_framebuffer *framebuffer, } *cmd; int i, increment = 1; - if (!num_clips || - !(dev_priv->fifo.capabilities & - SVGA_FIFO_CAP_SCREEN_OBJECT)) { + if (!num_clips) { num_clips = 1; clips = &norect; norect.x1 = norect.y1 = 0; @@ -574,10 +572,10 @@ int vmw_framebuffer_dmabuf_dirty(struct drm_framebuffer *framebuffer, for (i = 0; i < num_clips; i++, clips += increment) { cmd[i].header = cpu_to_le32(SVGA_CMD_UPDATE); - cmd[i].body.x = cpu_to_le32(clips[i].x1); - cmd[i].body.y = cpu_to_le32(clips[i].y1); - cmd[i].body.width = cpu_to_le32(clips[i].x2 - clips[i].x1); - cmd[i].body.height = cpu_to_le32(clips[i].y2 - clips[i].y1); + cmd[i].body.x = cpu_to_le32(clips->x1); + cmd[i].body.y = cpu_to_le32(clips->y1); + cmd[i].body.width = cpu_to_le32(clips->x2 - clips->x1); + cmd[i].body.height = cpu_to_le32(clips->y2 - clips->y1); } vmw_fifo_commit(dev_priv, sizeof(*cmd) * num_clips); From 50ec3b7c35fda131e92abc6f9d93a230b7e009eb Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 13 Jan 2010 22:28:37 +0100 Subject: [PATCH 0845/1626] drm/vmwgfx: Fix an error path causing an oops. An error happening before the snooper.image member had been set up would cause a kfree of an arbitrary pointer. Set up the snooper.image member early. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_resource.c | 39 +++++++++++++----------- 1 file changed, 21 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index c012d5927f65..125c2f44f98c 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -599,6 +599,27 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, if (unlikely(ret != 0)) goto out_err1; + + if (srf->flags & (1 << 9) && + srf->num_sizes == 1 && + srf->sizes[0].width == 64 && + srf->sizes[0].height == 64 && + srf->format == SVGA3D_A8R8G8B8) { + + srf->snooper.image = kmalloc(64 * 64 * 4, GFP_KERNEL); + /* clear the image */ + if (srf->snooper.image) { + memset(srf->snooper.image, 0x00, 64 * 64 * 4); + } else { + DRM_ERROR("Failed to allocate cursor_image\n"); + ret = -ENOMEM; + goto out_err1; + } + } else { + srf->snooper.image = NULL; + } + srf->snooper.crtc = NULL; + user_srf->base.shareable = false; user_srf->base.tfile = NULL; @@ -622,24 +643,6 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, return ret; } - if (srf->flags & (1 << 9) && - srf->num_sizes == 1 && - srf->sizes[0].width == 64 && - srf->sizes[0].height == 64 && - srf->format == SVGA3D_A8R8G8B8) { - - srf->snooper.image = kmalloc(64 * 64 * 4, GFP_KERNEL); - /* clear the image */ - if (srf->snooper.image) - memset(srf->snooper.image, 0x00, 64 * 64 * 4); - else - DRM_ERROR("Failed to allocate cursor_image\n"); - - } else { - srf->snooper.image = NULL; - } - srf->snooper.crtc = NULL; - rep->sid = user_srf->base.hash.key; if (rep->sid == SVGA3D_INVALID_ID) DRM_ERROR("Created bad Surface ID.\n"); From 7704befbd599e9c9524f640e14658ca8ed9d8717 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 13 Jan 2010 22:28:38 +0100 Subject: [PATCH 0846/1626] drm/vmwgfx: Make fence sequences continous across a VT switch. A vt switch in stealth mode would take down the FIFO, and re- initialize fence sequence numbers. This patch saves the current state of the fence sequence when the FIFO is disabled. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 1 + drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c | 3 +-- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 1db1ef30be2b..70e4f5f0c122 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -217,6 +217,7 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) dev_priv->dev = dev; dev_priv->vmw_chipset = chipset; + dev_priv->last_read_sequence = (uint32_t) -100; mutex_init(&dev_priv->hw_mutex); mutex_init(&dev_priv->cmdbuf_mutex); rwlock_init(&dev_priv->resource_lock); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index 01feb48af333..f7d5f70b52dd 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -98,8 +98,7 @@ int vmw_fifo_init(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo) (unsigned int) min, (unsigned int) fifo->capabilities); - dev_priv->fence_seq = (uint32_t) -100; - dev_priv->last_read_sequence = (uint32_t) -100; + dev_priv->fence_seq = dev_priv->last_read_sequence; iowrite32(dev_priv->last_read_sequence, fifo_mem + SVGA_FIFO_FENCE); return vmw_fifo_send_fence(dev_priv, &dummy); From effe1105bef07f42366c20eac41b80ff9fcf675e Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 13 Jan 2010 22:28:39 +0100 Subject: [PATCH 0847/1626] drm/vmwgfx: Use bo_driver::move_notify to unbind GMRs. This was previously done explicitly for overlay- and fb buffers. Now it's done for any buffer leaving the SYSTEM memory region. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c | 10 +++++++++- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 1 + drivers/gpu/drm/vmwgfx/vmwgfx_fb.c | 8 -------- drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c | 9 --------- drivers/gpu/drm/vmwgfx/vmwgfx_resource.c | 23 ++++++++++++----------- 5 files changed, 22 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c b/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c index d6f2d2b882e9..4be47d84077f 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c @@ -172,6 +172,13 @@ static int vmw_verify_access(struct ttm_buffer_object *bo, struct file *filp) return 0; } +static void vmw_move_notify(struct ttm_buffer_object *bo, + struct ttm_mem_reg *new_mem) +{ + if (new_mem->mem_type != TTM_PL_SYSTEM) + vmw_dmabuf_gmr_unbind(bo); +} + /** * FIXME: We're using the old vmware polling method to sync. * Do this with fences instead. @@ -225,5 +232,6 @@ struct ttm_bo_driver vmw_bo_driver = { .sync_obj_wait = vmw_sync_obj_wait, .sync_obj_flush = vmw_sync_obj_flush, .sync_obj_unref = vmw_sync_obj_unref, - .sync_obj_ref = vmw_sync_obj_ref + .sync_obj_ref = vmw_sync_obj_ref, + .move_notify = vmw_move_notify }; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index e61bd85b6975..4c9d6b2b9958 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -353,6 +353,7 @@ extern int vmw_dmabuf_to_start_of_vram(struct vmw_private *vmw_priv, struct vmw_dma_buffer *bo); extern int vmw_dmabuf_from_vram(struct vmw_private *vmw_priv, struct vmw_dma_buffer *bo); +extern void vmw_dmabuf_gmr_unbind(struct ttm_buffer_object *bo); extern int vmw_stream_claim_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int vmw_stream_unref_ioctl(struct drm_device *dev, void *data, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c index 641dde76ada1..4f4f6432be8b 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c @@ -649,14 +649,6 @@ int vmw_dmabuf_to_start_of_vram(struct vmw_private *vmw_priv, if (unlikely(ret != 0)) goto err_unlock; - if (vmw_bo->gmr_bound) { - vmw_gmr_unbind(vmw_priv, vmw_bo->gmr_id); - spin_lock(&bo->glob->lru_lock); - ida_remove(&vmw_priv->gmr_ida, vmw_bo->gmr_id); - spin_unlock(&bo->glob->lru_lock); - vmw_bo->gmr_bound = NULL; - } - ret = ttm_bo_validate(bo, &ne_placement, false, false); ttm_bo_unreserve(bo); err_unlock: diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c index bb6e6a096d25..5b6eabeb7f51 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c @@ -104,7 +104,6 @@ static int vmw_dmabuf_pin_in_vram(struct vmw_private *dev_priv, bool pin, bool interruptible) { struct ttm_buffer_object *bo = &buf->base; - struct ttm_bo_global *glob = bo->glob; struct ttm_placement *overlay_placement = &vmw_vram_placement; int ret; @@ -116,14 +115,6 @@ static int vmw_dmabuf_pin_in_vram(struct vmw_private *dev_priv, if (unlikely(ret != 0)) goto err; - if (buf->gmr_bound) { - vmw_gmr_unbind(dev_priv, buf->gmr_id); - spin_lock(&glob->lru_lock); - ida_remove(&dev_priv->gmr_ida, buf->gmr_id); - spin_unlock(&glob->lru_lock); - buf->gmr_bound = NULL; - } - if (pin) overlay_placement = &vmw_vram_ne_placement; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index 125c2f44f98c..e0878077e8aa 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -757,20 +757,29 @@ static size_t vmw_dmabuf_acc_size(struct ttm_bo_global *glob, return bo_user_size + page_array_size; } -void vmw_dmabuf_bo_free(struct ttm_buffer_object *bo) +void vmw_dmabuf_gmr_unbind(struct ttm_buffer_object *bo) { struct vmw_dma_buffer *vmw_bo = vmw_dma_buffer(bo); struct ttm_bo_global *glob = bo->glob; struct vmw_private *dev_priv = container_of(bo->bdev, struct vmw_private, bdev); - ttm_mem_global_free(glob->mem_glob, bo->acc_size); if (vmw_bo->gmr_bound) { vmw_gmr_unbind(dev_priv, vmw_bo->gmr_id); spin_lock(&glob->lru_lock); ida_remove(&dev_priv->gmr_ida, vmw_bo->gmr_id); spin_unlock(&glob->lru_lock); + vmw_bo->gmr_bound = false; } +} + +void vmw_dmabuf_bo_free(struct ttm_buffer_object *bo) +{ + struct vmw_dma_buffer *vmw_bo = vmw_dma_buffer(bo); + struct ttm_bo_global *glob = bo->glob; + + vmw_dmabuf_gmr_unbind(bo); + ttm_mem_global_free(glob->mem_glob, bo->acc_size); kfree(vmw_bo); } @@ -816,18 +825,10 @@ int vmw_dmabuf_init(struct vmw_private *dev_priv, static void vmw_user_dmabuf_destroy(struct ttm_buffer_object *bo) { struct vmw_user_dma_buffer *vmw_user_bo = vmw_user_dma_buffer(bo); - struct vmw_dma_buffer *vmw_bo = &vmw_user_bo->dma; struct ttm_bo_global *glob = bo->glob; - struct vmw_private *dev_priv = - container_of(bo->bdev, struct vmw_private, bdev); + vmw_dmabuf_gmr_unbind(bo); ttm_mem_global_free(glob->mem_glob, bo->acc_size); - if (vmw_bo->gmr_bound) { - vmw_gmr_unbind(dev_priv, vmw_bo->gmr_id); - spin_lock(&glob->lru_lock); - ida_remove(&dev_priv->gmr_ida, vmw_bo->gmr_id); - spin_unlock(&glob->lru_lock); - } kfree(vmw_user_bo); } From 3f09ea4ecdcbcea05541f83e557d6ce2e56626d8 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 13 Jan 2010 22:28:40 +0100 Subject: [PATCH 0848/1626] drm/ttm: Add a swap_notify callback. This is needed for a bugfix in the vmwgfx driver. Drivers may have GPU bindings on buffers that core TTM is not aware of, and TTM may view those buffers as ordinary system memory buffers. Add a notifier to such drivers when TTM is about to move the buffer contents out to swappable memory. The driver must then release any private GPU bindings on those buffers. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo.c | 3 +++ include/drm/ttm/ttm_bo_driver.h | 5 +++++ 2 files changed, 8 insertions(+) diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 2920f9a279e1..e10a04e7c4e9 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -1844,6 +1844,9 @@ static int ttm_bo_swapout(struct ttm_mem_shrink *shrink) * anyone tries to access a ttm page. */ + if (bo->bdev->driver->swap_notify) + bo->bdev->driver->swap_notify(bo); + ret = ttm_tt_swapout(bo->ttm, bo->persistant_swap_storage); out: diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h index ff7664e0c3cd..4c4e0f8375b3 100644 --- a/include/drm/ttm/ttm_bo_driver.h +++ b/include/drm/ttm/ttm_bo_driver.h @@ -353,6 +353,11 @@ struct ttm_bo_driver { /* notify the driver we are taking a fault on this BO * and have reserved it */ void (*fault_reserve_notify)(struct ttm_buffer_object *bo); + + /** + * notify the driver that we're about to swap out this bo + */ + void (*swap_notify) (struct ttm_buffer_object *bo); }; /** From 476d51dbdbaa2e61fa4899459c658f476eee3fd9 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 13 Jan 2010 22:28:41 +0100 Subject: [PATCH 0849/1626] drm/vmwgfx: Implement a swap_notify callback. Unbind GMR bindings on the buffer about to be swapped out. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c b/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c index 4be47d84077f..37a81925b158 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c @@ -179,6 +179,11 @@ static void vmw_move_notify(struct ttm_buffer_object *bo, vmw_dmabuf_gmr_unbind(bo); } +static void vmw_swap_notify(struct ttm_buffer_object *bo) +{ + vmw_dmabuf_gmr_unbind(bo); +} + /** * FIXME: We're using the old vmware polling method to sync. * Do this with fences instead. @@ -233,5 +238,6 @@ struct ttm_bo_driver vmw_bo_driver = { .sync_obj_flush = vmw_sync_obj_flush, .sync_obj_unref = vmw_sync_obj_unref, .sync_obj_ref = vmw_sync_obj_ref, - .move_notify = vmw_move_notify + .move_notify = vmw_move_notify, + .swap_notify = vmw_swap_notify }; From e99e1e7893ac80fe769477cb1ddd4b482cef8902 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 13 Jan 2010 22:28:42 +0100 Subject: [PATCH 0850/1626] drm/ttm: Export symbols needed for vmwgfx suspend / resume operations. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo.c | 1 + drivers/gpu/drm/ttm/ttm_lock.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index e10a04e7c4e9..7a64f07b1202 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -1867,3 +1867,4 @@ void ttm_bo_swapout_all(struct ttm_bo_device *bdev) while (ttm_bo_swapout(&bdev->glob->shrink) == 0) ; } +EXPORT_SYMBOL(ttm_bo_swapout_all); diff --git a/drivers/gpu/drm/ttm/ttm_lock.c b/drivers/gpu/drm/ttm/ttm_lock.c index f619ebcaa4ec..3d172ef04ee1 100644 --- a/drivers/gpu/drm/ttm/ttm_lock.c +++ b/drivers/gpu/drm/ttm/ttm_lock.c @@ -288,6 +288,7 @@ void ttm_suspend_unlock(struct ttm_lock *lock) wake_up_all(&lock->queue); spin_unlock(&lock->lock); } +EXPORT_SYMBOL(ttm_suspend_unlock); static bool __ttm_suspend_lock(struct ttm_lock *lock) { @@ -309,3 +310,4 @@ void ttm_suspend_lock(struct ttm_lock *lock) { wait_event(lock->queue, __ttm_suspend_lock(lock)); } +EXPORT_SYMBOL(ttm_suspend_lock); From d9f36a0051b7c0382107cb0342af1126a6eb627d Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 13 Jan 2010 22:28:43 +0100 Subject: [PATCH 0851/1626] drm/vmwgfx: Implement basic pm operations. Currently we really only support S3, since the device doesn't support saving of the 3D state. On S3/S4, move all buffer objects to swappable memory and take down GMR bindings. We need to do that from a PM notifier since we can't do persistant memory allocations from the standard PM callbacks. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 62 ++++++++++++++++++++++++++++- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 2 + 2 files changed, 63 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 70e4f5f0c122..dedd121d8fe7 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -147,6 +147,8 @@ static char *vmw_devname = "vmwgfx"; static int vmw_probe(struct pci_dev *, const struct pci_device_id *); static void vmw_master_init(struct vmw_master *); +static int vmwgfx_pm_notifier(struct notifier_block *nb, unsigned long val, + void *ptr); static void vmw_print_capabilities(uint32_t capabilities) { @@ -352,6 +354,9 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) vmw_fb_init(dev_priv); } + dev_priv->pm_nb.notifier_call = vmwgfx_pm_notifier; + register_pm_notifier(&dev_priv->pm_nb); + return 0; out_no_device: @@ -386,6 +391,8 @@ static int vmw_driver_unload(struct drm_device *dev) DRM_INFO(VMWGFX_DRIVER_NAME " unload.\n"); + unregister_pm_notifier(&dev_priv->pm_nb); + if (!dev_priv->stealth) { vmw_fb_close(dev_priv); vmw_kms_close(dev_priv); @@ -651,6 +658,57 @@ static void vmw_remove(struct pci_dev *pdev) drm_put_dev(dev); } +static int vmwgfx_pm_notifier(struct notifier_block *nb, unsigned long val, + void *ptr) +{ + struct vmw_private *dev_priv = + container_of(nb, struct vmw_private, pm_nb); + struct vmw_master *vmaster = dev_priv->active_master; + + switch (val) { + case PM_HIBERNATION_PREPARE: + case PM_SUSPEND_PREPARE: + ttm_suspend_lock(&vmaster->lock); + + /** + * This empties VRAM and unbinds all GMR bindings. + * Buffer contents is moved to swappable memory. + */ + ttm_bo_swapout_all(&dev_priv->bdev); + break; + case PM_POST_HIBERNATION: + case PM_POST_SUSPEND: + ttm_suspend_unlock(&vmaster->lock); + break; + case PM_RESTORE_PREPARE: + break; + case PM_POST_RESTORE: + break; + default: + break; + } + return 0; +} + +/** + * These might not be needed with the virtual SVGA device. + */ + +int vmw_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D3hot); + return 0; +} + +int vmw_pci_resume(struct pci_dev *pdev) +{ + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + return pci_enable_device(pdev); +} + static struct drm_driver driver = { .driver_features = DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_MODESET, @@ -690,7 +748,9 @@ static struct drm_driver driver = { .name = VMWGFX_DRIVER_NAME, .id_table = vmw_pci_id_list, .probe = vmw_probe, - .remove = vmw_remove + .remove = vmw_remove, + .suspend = vmw_pci_suspend, + .resume = vmw_pci_resume }, .name = VMWGFX_DRIVER_NAME, .desc = VMWGFX_DRIVER_DESC, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 4c9d6b2b9958..7532b9b47eec 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -32,6 +32,7 @@ #include "drmP.h" #include "vmwgfx_drm.h" #include "drm_hashtab.h" +#include "linux/suspend.h" #include "ttm/ttm_bo_driver.h" #include "ttm/ttm_object.h" #include "ttm/ttm_lock.h" @@ -258,6 +259,7 @@ struct vmw_private { struct vmw_master *active_master; struct vmw_master fbdev_master; + struct notifier_block pm_nb; }; static inline struct vmw_private *vmw_priv(struct drm_device *dev) From 354fb52cb6138de0e6cf84a0f6a7f3467586e390 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 13 Jan 2010 22:28:45 +0100 Subject: [PATCH 0852/1626] drm/ttm: Make sure system buffer objects has offset == 0. This is a convention that the vmwgfx driver has come to rely on. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 7a64f07b1202..da3702135ada 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -426,7 +426,8 @@ moved: bdev->man[bo->mem.mem_type].gpu_offset; bo->cur_placement = bo->mem.placement; spin_unlock(&bo->lock); - } + } else + bo->offset = 0; return 0; From 9b96918a974fcd6c9e752cc8b28157f776c601d3 Mon Sep 17 00:00:00 2001 From: Ramax Lo Date: Thu, 14 Jan 2010 10:15:05 +0800 Subject: [PATCH 0853/1626] ARM: S3C: NAND: Check the existence of nr_map before copying Since the structure field nr_map is optional, we need to check whether the chip number map is provided to avoid unexpected NULL pointer exception. Signed-off-by: Ramax Lo Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/dev-nand.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c index 84808ccda70e..a52fb6cf618f 100644 --- a/arch/arm/plat-s3c/dev-nand.c +++ b/arch/arm/plat-s3c/dev-nand.c @@ -58,8 +58,8 @@ static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set) return -ENOMEM; } - size = sizeof(int) * set->nr_chips; - if (size) { + if (set->nr_map && set->nr_chips) { + size = sizeof(int) * set->nr_chips; ptr = kmemdup(set->nr_map, size, GFP_KERNEL); set->nr_map = ptr; From 0a90dc51aa3162abb7cd64323ba2e6674e1c5ff4 Mon Sep 17 00:00:00 2001 From: Maarten Maathuis Date: Mon, 11 Jan 2010 21:18:53 +0100 Subject: [PATCH 0854/1626] drm/nv50: wait for pgraph to idle before unloading the context This should fix the problem with gpu hangs people have had when closing channels. Signed-off-by: Maarten Maathuis Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_graph.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c index ca79f32be44c..56a9753db23c 100644 --- a/drivers/gpu/drm/nouveau/nv50_graph.c +++ b/drivers/gpu/drm/nouveau/nv50_graph.c @@ -282,6 +282,7 @@ nv50_graph_unload_context(struct drm_device *dev) return 0; inst &= NV50_PGRAPH_CTXCTL_CUR_INSTANCE; + nouveau_wait_for_idle(dev); nv_wr32(dev, 0x400500, fifo & ~1); nv_wr32(dev, 0x400784, inst); nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) | 0x20); From 9855e584d296a32bbcc1bb3d29b7e0ed078b03cc Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 12 Jan 2010 13:02:19 +1000 Subject: [PATCH 0855/1626] drm/nouveau: trust init table registers are safe Apparently the original reason for checking this was there were known register accesses that caused hangs on some chipsets. This was more than likely because of incorrect parsing of previous opcodes, and I hardly think aborting a script half way through is going to be any better (in fact, we have had bug reports where this has been the cause of s/r failures among other things). This patch (which has been in Fedora 12 for a long time now) removes all checking for known register ranges, and just leaves the check to ensure the access is within the mapped aperture to avoid an oops. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bios.c | 59 ++++---------------------- 1 file changed, 9 insertions(+), 50 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index ba143972769f..9710e69898f6 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -310,63 +310,22 @@ valid_reg(struct nvbios *bios, uint32_t reg) struct drm_device *dev = bios->dev; /* C51 has misaligned regs on purpose. Marvellous */ - if (reg & 0x2 || (reg & 0x1 && dev_priv->VBIOS.pub.chip_version != 0x51)) { - NV_ERROR(dev, "========== misaligned reg 0x%08X ==========\n", - reg); - return 0; - } - /* - * Warn on C51 regs that have not been verified accessible in - * mmiotracing - */ + if (reg & 0x2 || + (reg & 0x1 && dev_priv->VBIOS.pub.chip_version != 0x51)) + NV_ERROR(dev, "======= misaligned reg 0x%08X =======\n", reg); + + /* warn on C51 regs that haven't been verified accessible in tracing */ if (reg & 0x1 && dev_priv->VBIOS.pub.chip_version == 0x51 && reg != 0x130d && reg != 0x1311 && reg != 0x60081d) NV_WARN(dev, "=== C51 misaligned reg 0x%08X not verified ===\n", reg); - /* Trust the init scripts on G80 */ - if (dev_priv->card_type >= NV_50) - return 1; - - #define WITHIN(x, y, z) ((x >= y) && (x < y + z)) - if (WITHIN(reg, NV_PMC_OFFSET, NV_PMC_SIZE)) - return 1; - if (WITHIN(reg, NV_PBUS_OFFSET, NV_PBUS_SIZE)) - return 1; - if (WITHIN(reg, NV_PFIFO_OFFSET, NV_PFIFO_SIZE)) - return 1; - if (dev_priv->VBIOS.pub.chip_version >= 0x30 && - (WITHIN(reg, 0x4000, 0x600) || reg == 0x00004600)) - return 1; - if (dev_priv->VBIOS.pub.chip_version >= 0x40 && - WITHIN(reg, 0xc000, 0x48)) - return 1; - if (dev_priv->VBIOS.pub.chip_version >= 0x17 && reg == 0x0000d204) - return 1; - if (dev_priv->VBIOS.pub.chip_version >= 0x40) { - if (reg == 0x00011014 || reg == 0x00020328) - return 1; - if (WITHIN(reg, 0x88000, NV_PBUS_SIZE)) /* new PBUS */ - return 1; + if (reg >= (8*1024*1024)) { + NV_ERROR(dev, "=== reg 0x%08x out of mapped bounds ===\n", reg); + return 0; } - if (WITHIN(reg, NV_PFB_OFFSET, NV_PFB_SIZE)) - return 1; - if (WITHIN(reg, NV_PEXTDEV_OFFSET, NV_PEXTDEV_SIZE)) - return 1; - if (WITHIN(reg, NV_PCRTC0_OFFSET, NV_PCRTC0_SIZE * 2)) - return 1; - if (WITHIN(reg, NV_PRAMDAC0_OFFSET, NV_PRAMDAC0_SIZE * 2)) - return 1; - if (dev_priv->VBIOS.pub.chip_version >= 0x17 && reg == 0x0070fff0) - return 1; - if (dev_priv->VBIOS.pub.chip_version == 0x51 && - WITHIN(reg, NV_PRAMIN_OFFSET, NV_PRAMIN_SIZE)) - return 1; - #undef WITHIN - NV_ERROR(dev, "========== unknown reg 0x%08X ==========\n", reg); - - return 0; + return 1; } static bool From e147eae80afe98b86a7921a40a709584e6603e34 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 12 Jan 2010 15:28:19 +1000 Subject: [PATCH 0856/1626] drm/nouveau: wait on fence after bo move if validating for another channel Not an ideal solution, but it'll do for the moment for correctness. We need to come up with a nicer way to manage inter-channel sync, the hw is unfortunately a little lacking in this area. Should fix some resume corruption, as well as corruption that may be seen while under memory pressure. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bo.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index e342a418d434..db0ed4c13f98 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -469,6 +469,8 @@ nouveau_bo_move_accel_cleanup(struct nouveau_channel *chan, ret = ttm_bo_move_accel_cleanup(&nvbo->bo, fence, NULL, evict, no_wait, new_mem); + if (nvbo->channel && nvbo->channel != chan) + ret = nouveau_fence_wait(fence, NULL, false, false); nouveau_fence_unref((void *)&fence); return ret; } From 77cb5c75e89ccfeb993d9dec37f8edb3a855e9f4 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 13 Jan 2010 11:22:33 +1000 Subject: [PATCH 0857/1626] drm/nouveau: remove PRIV0 check in nouveau_mem_close() We don't setup PRIV0 anymore, so this is unnecessary. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_mem.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c index fb9bdd6edf1f..be4c7781d761 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mem.c +++ b/drivers/gpu/drm/nouveau/nouveau_mem.c @@ -383,10 +383,7 @@ void nouveau_mem_close(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; - if (dev_priv->ttm.bdev.man[TTM_PL_PRIV0].has_type) - ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_PRIV0); ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM); - ttm_bo_device_release(&dev_priv->ttm.bdev); nouveau_ttm_global_release(dev_priv); From ed42f8240cfea13580fe91195e52c5247275e7df Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 14 Jan 2010 15:58:10 +1000 Subject: [PATCH 0858/1626] drm/nouveau: assume no nv04 board has a DCB table There's a report of a TNT2 where the DCB table pointer is *not* NULL (it contains a part of a VBIOS data string), and we assume this means a DCB table is present, causing all kinds of hilarity. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bios.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 9710e69898f6..9dd2efa07f68 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -5523,11 +5523,13 @@ void merge_like_dcb_entries(struct drm_device *dev, struct parsed_dcb *dcb) dcb->entries = newentries; } -static int parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads) +static int +parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads) { + struct drm_nouveau_private *dev_priv = dev->dev_private; struct bios_parsed_dcb *bdcb = &bios->bdcb; struct parsed_dcb *dcb; - uint16_t dcbptr, i2ctabptr = 0; + uint16_t dcbptr = 0, i2ctabptr = 0; uint8_t *dcbtable; uint8_t headerlen = 0x4, entries = DCB_MAX_NUM_ENTRIES; bool configblock = true; @@ -5538,16 +5540,18 @@ static int parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool two dcb->entries = 0; /* get the offset from 0x36 */ - dcbptr = ROM16(bios->data[0x36]); + if (dev_priv->card_type > NV_04) { + dcbptr = ROM16(bios->data[0x36]); + if (dcbptr == 0x0000) + NV_WARN(dev, "No output data (DCB) found in BIOS\n"); + } + /* this situation likely means a really old card, pre DCB */ if (dcbptr == 0x0) { - NV_WARN(dev, "No output data (DCB) found in BIOS, " - "assuming a CRT output exists\n"); - /* this situation likely means a really old card, pre DCB */ + NV_INFO(dev, "Assuming a CRT output exists\n"); fabricate_vga_output(dcb, LEGACY_I2C_CRT, 1); - if (nv04_tv_identify(dev, - bios->legacy.i2c_indices.tv) >= 0) + if (nv04_tv_identify(dev, bios->legacy.i2c_indices.tv) >= 0) fabricate_tv_output(dcb, twoHeads); return 0; From b0d2de860bd621959bc826ffd42618fe1de37a61 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 14 Jan 2010 17:53:04 +1000 Subject: [PATCH 0859/1626] drm/nouveau: less magic DCB 1.5 parsing This in the very least matches the parsing of all the previously known entries, and hopefully (at least closer to) correct for any we haven't seen yet. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bios.c | 81 +++++++++++++------------- 1 file changed, 41 insertions(+), 40 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 9dd2efa07f68..ca2fcdf32b84 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -5393,52 +5393,49 @@ static bool parse_dcb15_entry(struct drm_device *dev, struct parsed_dcb *dcb, uint32_t conn, uint32_t conf, struct dcb_entry *entry) { - if (conn != 0xf0003f00 && conn != 0xf2247f10 && conn != 0xf2204001 && - conn != 0xf2204301 && conn != 0xf2204311 && conn != 0xf2208001 && - conn != 0xf2244001 && conn != 0xf2244301 && conn != 0xf2244311 && - conn != 0xf4204011 && conn != 0xf4208011 && conn != 0xf4248011 && - conn != 0xf2045ff2 && conn != 0xf2045f14 && conn != 0xf207df14 && - conn != 0xf2205004 && conn != 0xf2209004) { - NV_ERROR(dev, "Unknown DCB 1.5 entry, please report\n"); - - /* cause output setting to fail for !TV, so message is seen */ - if ((conn & 0xf) != 0x1) - dcb->entries = 0; - + switch (conn & 0x0000000f) { + case 0: + entry->type = OUTPUT_ANALOG; + break; + case 1: + entry->type = OUTPUT_TV; + break; + case 2: + case 3: + entry->type = OUTPUT_LVDS; + break; + case 4: + switch ((conn & 0x000000f0) >> 4) { + case 0: + entry->type = OUTPUT_TMDS; + break; + case 1: + entry->type = OUTPUT_LVDS; + break; + default: + NV_ERROR(dev, "Unknown DCB subtype 4/%d\n", + (conn & 0x000000f0) >> 4); + return false; + } + break; + default: + NV_ERROR(dev, "Unknown DCB type %d\n", conn & 0x0000000f); return false; } - /* most of the below is a "best guess" atm */ - entry->type = conn & 0xf; - if (entry->type == 2) - /* another way of specifying straps based lvds... */ - entry->type = OUTPUT_LVDS; - if (entry->type == 4) { /* digital */ - if (conn & 0x10) - entry->type = OUTPUT_LVDS; - else - entry->type = OUTPUT_TMDS; - } - /* what's in bits 5-13? could be some encoder maker thing, in tv case */ - entry->i2c_index = (conn >> 14) & 0xf; - /* raw heads field is in range 0-1, so move to 1-2 */ - entry->heads = ((conn >> 18) & 0x7) + 1; - entry->location = (conn >> 21) & 0xf; - /* unused: entry->bus = (conn >> 25) & 0x7; */ - /* set or to be same as heads -- hopefully safe enough */ - entry->or = entry->heads; + + entry->i2c_index = (conn & 0x0003c000) >> 14; + entry->heads = ((conn & 0x001c0000) >> 18) + 1; + entry->or = entry->heads; /* same as heads, hopefully safe enough */ + entry->location = (conn & 0x01e00000) >> 21; + entry->bus = (conn & 0x0e000000) >> 25; entry->duallink_possible = false; switch (entry->type) { case OUTPUT_ANALOG: entry->crtconf.maxfreq = (conf & 0xffff) * 10; break; - case OUTPUT_LVDS: - /* - * This is probably buried in conn's unknown bits. - * This will upset EDID-ful models, if they exist - */ - entry->lvdsconf.use_straps_for_mode = true; - entry->lvdsconf.use_power_scripts = true; + case OUTPUT_TV: + entry->tvconf.has_component_output = false; break; case OUTPUT_TMDS: /* @@ -5447,8 +5444,12 @@ parse_dcb15_entry(struct drm_device *dev, struct parsed_dcb *dcb, */ fabricate_vga_output(dcb, entry->i2c_index, entry->heads); break; - case OUTPUT_TV: - entry->tvconf.has_component_output = false; + case OUTPUT_LVDS: + if ((conn & 0x00003f00) != 0x10) + entry->lvdsconf.use_straps_for_mode = true; + entry->lvdsconf.use_power_scripts = true; + break; + default: break; } From 716abaa8e52548e8863831cb32984655f46b5566 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marcin=20Ko=C5=9Bcielnicki?= Date: Tue, 12 Jan 2010 18:21:56 +0000 Subject: [PATCH 0860/1626] drm/nv50: Fix typo in PGRAPH initialisation. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This enables streamout functionality. Signed-off-by: Marcin Kościelnicki Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_graph.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c index 56a9753db23c..20319e59d368 100644 --- a/drivers/gpu/drm/nouveau/nv50_graph.c +++ b/drivers/gpu/drm/nouveau/nv50_graph.c @@ -84,7 +84,7 @@ nv50_graph_init_regs__nv(struct drm_device *dev) nv_wr32(dev, 0x400804, 0xc0000000); nv_wr32(dev, 0x406800, 0xc0000000); nv_wr32(dev, 0x400c04, 0xc0000000); - nv_wr32(dev, 0x401804, 0xc0000000); + nv_wr32(dev, 0x401800, 0xc0000000); nv_wr32(dev, 0x405018, 0xc0000000); nv_wr32(dev, 0x402000, 0xc0000000); From 8654164f54bd02787ae91db8526dcae8e7e34eeb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 14 Jan 2010 03:14:53 -0800 Subject: [PATCH 0861/1626] sparc32: Fix page_to_phys(). It doesn't account for phys_base like it should, fix by using page_to_pfn(). While we're here, make virt_to_page() use pfn_to_page() as well, so we consistently use the asm/memory-model.h abstractions instead of open-coding memory model assumptions. Tested-by: Kristoffer Glembo Signed-off-by: David S. Miller --- arch/sparc/include/asm/io_32.h | 2 +- arch/sparc/include/asm/page_32.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h index 93fe21e02c86..679c7504625a 100644 --- a/arch/sparc/include/asm/io_32.h +++ b/arch/sparc/include/asm/io_32.h @@ -8,7 +8,7 @@ #include /* IO address mapping routines need this */ #include -#define page_to_phys(page) (((page) - mem_map) << PAGE_SHIFT) +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) static inline u32 flip_dword (u32 l) { diff --git a/arch/sparc/include/asm/page_32.h b/arch/sparc/include/asm/page_32.h index f72080bdda94..156707b0f18d 100644 --- a/arch/sparc/include/asm/page_32.h +++ b/arch/sparc/include/asm/page_32.h @@ -143,7 +143,7 @@ extern unsigned long pfn_base; #define phys_to_virt __va #define ARCH_PFN_OFFSET (pfn_base) -#define virt_to_page(kaddr) (mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT))) +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) #define pfn_valid(pfn) (((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr)) #define virt_addr_valid(kaddr) ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr) From c7a8eb103248a110cdbe0530d8c5ce987f099eee Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 14 Jan 2010 12:39:02 +0100 Subject: [PATCH 0862/1626] ALSA: hda - Fix missing capture mixer for ALC861/660 codecs The capture-related mixer elements are missing with ALC861/ALC660 codecs when quirks are present, due to missing call of set_capture_mixer(). Reference: Novell bnc#567340 http://bugzilla.novell.com/show_bug.cgi?id=567340 Signed-off-by: Takashi Iwai Cc: --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 11b989bacd3c..abae1007cea2 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -14879,6 +14879,8 @@ static int patch_alc861(struct hda_codec *codec) spec->stream_digital_playback = &alc861_pcm_digital_playback; spec->stream_digital_capture = &alc861_pcm_digital_capture; + if (!spec->cap_mixer) + set_capture_mixer(codec); set_beep_amp(spec, 0x23, 0, HDA_OUTPUT); spec->vmaster_nid = 0x03; From 86acdca1b63e6890540fa19495cfc708beff3d8b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 22 Dec 2009 23:45:11 -0500 Subject: [PATCH 0863/1626] fix autofs/afs/etc. magic mountpoint breakage We end up trying to kfree() nd.last.name on open("/mnt/tmp", O_CREAT) if /mnt/tmp is an autofs direct mount. The reason is that nd.last_type is bogus here; we want LAST_BIND for everything of that kind and we get LAST_NORM left over from finding parent directory. So make sure that it *is* set properly; set to LAST_BIND before doing ->follow_link() - for normal symlinks it will be changed by __vfs_follow_link() and everything else needs it set that way. Signed-off-by: Al Viro --- fs/namei.c | 1 + fs/proc/base.c | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index b55440baf7ab..1b26b1620664 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -561,6 +561,7 @@ static __always_inline int __do_follow_link(struct path *path, struct nameidata dget(dentry); } mntget(path->mnt); + nd->last_type = LAST_BIND; cookie = dentry->d_inode->i_op->follow_link(dentry, nd); error = PTR_ERR(cookie); if (!IS_ERR(cookie)) { diff --git a/fs/proc/base.c b/fs/proc/base.c index 18d5cc62d8ed..e42bbd843ed1 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -1419,7 +1419,6 @@ static void *proc_pid_follow_link(struct dentry *dentry, struct nameidata *nd) goto out; error = PROC_I(inode)->op.proc_get_link(inode, &nd->path); - nd->last_type = LAST_BIND; out: return ERR_PTR(error); } From 204f2f0e82ec5cecbe671cfe2b132146929213d3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 23 Dec 2009 00:35:54 -0500 Subject: [PATCH 0864/1626] Kill 9p readlink() For symlinks generic_readlink() will work just fine and for directories we don't want ->readlink() at all. Signed-off-by: Al Viro --- fs/9p/vfs_inode.c | 41 +---------------------------------------- 1 file changed, 1 insertion(+), 40 deletions(-) diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index 18f74ec4dce9..9d03d1ebca6f 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -1000,44 +1000,6 @@ done: return retval; } -/** - * v9fs_vfs_readlink - read a symlink's location - * @dentry: dentry for symlink - * @buffer: buffer to load symlink location into - * @buflen: length of buffer - * - */ - -static int v9fs_vfs_readlink(struct dentry *dentry, char __user * buffer, - int buflen) -{ - int retval; - int ret; - char *link = __getname(); - - if (unlikely(!link)) - return -ENOMEM; - - if (buflen > PATH_MAX) - buflen = PATH_MAX; - - P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name, - dentry); - - retval = v9fs_readlink(dentry, link, buflen); - - if (retval > 0) { - if ((ret = copy_to_user(buffer, link, retval)) != 0) { - P9_DPRINTK(P9_DEBUG_ERROR, - "problem copying to user: %d\n", ret); - retval = ret; - } - } - - __putname(link); - return retval; -} - /** * v9fs_vfs_follow_link - follow a symlink path * @dentry: dentry for symlink @@ -1230,7 +1192,6 @@ static const struct inode_operations v9fs_dir_inode_operations_ext = { .rmdir = v9fs_vfs_rmdir, .mknod = v9fs_vfs_mknod, .rename = v9fs_vfs_rename, - .readlink = v9fs_vfs_readlink, .getattr = v9fs_vfs_getattr, .setattr = v9fs_vfs_setattr, }; @@ -1253,7 +1214,7 @@ static const struct inode_operations v9fs_file_inode_operations = { }; static const struct inode_operations v9fs_symlink_inode_operations = { - .readlink = v9fs_vfs_readlink, + .readlink = generic_readlink, .follow_link = v9fs_vfs_follow_link, .put_link = v9fs_vfs_put_link, .getattr = v9fs_vfs_getattr, From 7b264fc2bef4a3de8bc5ff1a6c5b9e890b069a04 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 23 Dec 2009 00:43:50 -0500 Subject: [PATCH 0865/1626] hppfs: handle ->put_link() current code works only because nothing in procfs has non-trivial ->put_link(). Signed-off-by: Al Viro --- fs/hppfs/hppfs.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c index a5089a6dd67a..7239efc690d8 100644 --- a/fs/hppfs/hppfs.c +++ b/fs/hppfs/hppfs.c @@ -646,22 +646,27 @@ static const struct super_operations hppfs_sbops = { static int hppfs_readlink(struct dentry *dentry, char __user *buffer, int buflen) { - struct dentry *proc_dentry; - - proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry; + struct dentry *proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry; return proc_dentry->d_inode->i_op->readlink(proc_dentry, buffer, buflen); } static void *hppfs_follow_link(struct dentry *dentry, struct nameidata *nd) { - struct dentry *proc_dentry; - - proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry; + struct dentry *proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry; return proc_dentry->d_inode->i_op->follow_link(proc_dentry, nd); } +static void hppfs_put_link(struct dentry *dentry, struct nameidata *nd, + void *cookie) +{ + struct dentry *proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry; + + if (proc_dentry->d_inode->i_op->put_link) + proc_dentry->d_inode->i_op->put_link(proc_dentry, nd, cookie); +} + static const struct inode_operations hppfs_dir_iops = { .lookup = hppfs_lookup, }; @@ -669,6 +674,7 @@ static const struct inode_operations hppfs_dir_iops = { static const struct inode_operations hppfs_link_iops = { .readlink = hppfs_readlink, .follow_link = hppfs_follow_link, + .put_link = hppfs_put_link, }; static struct inode *get_inode(struct super_block *sb, struct dentry *dentry) From 4ecf09fd3a7c8858198875171b684c73338fad83 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 24 Dec 2009 00:44:44 -0500 Subject: [PATCH 0866/1626] Unrot uml mconsole a bit Signed-off-by: Al Viro --- arch/um/drivers/mconsole_kern.c | 53 +++++++++++++-------------------- 1 file changed, 20 insertions(+), 33 deletions(-) diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index 51069245b79a..3b3c36601a7b 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -125,50 +125,36 @@ void mconsole_log(struct mc_request *req) void mconsole_proc(struct mc_request *req) { struct nameidata nd; - struct file_system_type *proc; - struct super_block *super; + struct vfsmount *mnt = current->nsproxy->pid_ns->proc_mnt; struct file *file; int n, err; char *ptr = req->request.data, *buf; + mm_segment_t old_fs = get_fs(); ptr += strlen("proc"); ptr = skip_spaces(ptr); - proc = get_fs_type("proc"); - if (proc == NULL) { - mconsole_reply(req, "procfs not registered", 1, 0); - goto out; - } - - super = (*proc->get_sb)(proc, 0, NULL, NULL); - put_filesystem(proc); - if (super == NULL) { - mconsole_reply(req, "Failed to get procfs superblock", 1, 0); - goto out; - } - up_write(&super->s_umount); - - nd.path.dentry = super->s_root; - nd.path.mnt = NULL; - nd.flags = O_RDONLY + 1; - nd.last_type = LAST_ROOT; - - /* START: it was experienced that the stability problems are closed - * if commenting out these two calls + the below read cycle. To - * make UML crash again, it was enough to readd either one.*/ - err = link_path_walk(ptr, &nd); + err = vfs_path_lookup(mnt->mnt_root, mnt, ptr, LOOKUP_FOLLOW, &nd); if (err) { mconsole_reply(req, "Failed to look up file", 1, 0); - goto out_kill; + goto out; + } + + err = may_open(&nd.path, MAY_READ, FMODE_READ); + if (result) { + mconsole_reply(req, "Failed to open file", 1, 0); + path_put(&nd.path); + goto out; } file = dentry_open(nd.path.dentry, nd.path.mnt, O_RDONLY, current_cred()); + err = PTR_ERR(file); if (IS_ERR(file)) { mconsole_reply(req, "Failed to open file", 1, 0); - goto out_kill; + path_put(&nd.path); + goto out; } - /*END*/ buf = kmalloc(PAGE_SIZE, GFP_KERNEL); if (buf == NULL) { @@ -176,10 +162,13 @@ void mconsole_proc(struct mc_request *req) goto out_fput; } - if ((file->f_op != NULL) && (file->f_op->read != NULL)) { + if (file->f_op->read) { do { - n = (*file->f_op->read)(file, buf, PAGE_SIZE - 1, - &file->f_pos); + loff_t pos; + set_fs(KERNEL_DS); + n = vfs_read(file, buf, PAGE_SIZE - 1, &pos); + file_pos_write(file, pos); + set_fs(old_fs); if (n >= 0) { buf[n] = '\0'; mconsole_reply(req, buf, 0, (n > 0)); @@ -197,8 +186,6 @@ void mconsole_proc(struct mc_request *req) kfree(buf); out_fput: fput(file); - out_kill: - deactivate_super(super); out: ; } #endif From 6d125529c6cbfe570ce3bf9a0728548f087499da Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 24 Dec 2009 06:58:56 -0500 Subject: [PATCH 0867/1626] Fix ACC_MODE() for real commit 5300990c0370e804e49d9a59d928c5d53fb73487 had stepped on a rather nasty mess: definitions of ACC_MODE used to be different. Fixed the resulting breakage, converting them to variant that takes O_... value; all callers have that and it actually simplifies life (see tomoyo part of changes). Signed-off-by: Al Viro --- fs/namei.c | 2 +- include/linux/fs.h | 2 +- security/tomoyo/tomoyo.c | 7 +------ 3 files changed, 3 insertions(+), 8 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 1b26b1620664..d930f1856ed2 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1620,7 +1620,7 @@ struct file *do_filp_open(int dfd, const char *pathname, open_flag |= O_DSYNC; if (!acc_mode) - acc_mode = MAY_OPEN | ACC_MODE(flag); + acc_mode = MAY_OPEN | ACC_MODE(open_flag); /* O_TRUNC implies we need access checks for write permissions */ if (flag & O_TRUNC) diff --git a/include/linux/fs.h b/include/linux/fs.h index 9147ca88f253..b1bcb275b596 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2463,7 +2463,7 @@ int proc_nr_files(struct ctl_table *table, int write, int __init get_filesystem_list(char *buf); -#define ACC_MODE(x) ("\000\004\002\006"[(x)&O_ACCMODE]) +#define ACC_MODE(x) ("\004\002\006\006"[(x)&O_ACCMODE]) #define OPEN_FMODE(flag) ((__force fmode_t)((flag + 1) & O_ACCMODE)) #endif /* __KERNEL__ */ diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c index 8a00ade85166..2aceebf5f354 100644 --- a/security/tomoyo/tomoyo.c +++ b/security/tomoyo/tomoyo.c @@ -80,9 +80,8 @@ static int tomoyo_bprm_check_security(struct linux_binprm *bprm) return tomoyo_find_next_domain(bprm); /* * Read permission is checked against interpreters using next domain. - * '1' is the result of open_to_namei_flags(O_RDONLY). */ - return tomoyo_check_open_permission(domain, &bprm->file->f_path, 1); + return tomoyo_check_open_permission(domain, &bprm->file->f_path, O_RDONLY); } static int tomoyo_path_truncate(struct path *path, loff_t length, @@ -184,10 +183,6 @@ static int tomoyo_file_fcntl(struct file *file, unsigned int cmd, static int tomoyo_dentry_open(struct file *f, const struct cred *cred) { int flags = f->f_flags; - - if ((flags + 1) & O_ACCMODE) - flags++; - flags |= f->f_flags & (O_APPEND | O_TRUNC); /* Don't check read permission here if called from do_execve(). */ if (current->in_execve) return 0; From 806892e9e12e731a0ca76c8f62ad95cf8eea9614 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 12 Jan 2010 03:36:14 +0900 Subject: [PATCH 0868/1626] ecryptfs: Fix refcnt leak on ecryptfs_follow_link() error path If ->follow_link handler return the error, it should decrement nd->path refcnt. But, ecryptfs_follow_link() doesn't decrement. This patch fix it by using usual nd_set_link() style error handling, instead of playing with nd->path. Signed-off-by: OGAWA Hirofumi Signed-off-by: Al Viro --- fs/ecryptfs/inode.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 429ca0b3ba08..7f8545032930 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -715,31 +715,31 @@ static void *ecryptfs_follow_link(struct dentry *dentry, struct nameidata *nd) /* Released in ecryptfs_put_link(); only release here on error */ buf = kmalloc(len, GFP_KERNEL); if (!buf) { - rc = -ENOMEM; + buf = ERR_PTR(-ENOMEM); goto out; } old_fs = get_fs(); set_fs(get_ds()); rc = dentry->d_inode->i_op->readlink(dentry, (char __user *)buf, len); set_fs(old_fs); - if (rc < 0) - goto out_free; - else + if (rc < 0) { + kfree(buf); + buf = ERR_PTR(rc); + } else buf[rc] = '\0'; - rc = 0; - nd_set_link(nd, buf); - goto out; -out_free: - kfree(buf); out: - return ERR_PTR(rc); + nd_set_link(nd, buf); + return NULL; } static void ecryptfs_put_link(struct dentry *dentry, struct nameidata *nd, void *ptr) { - /* Free the char* */ - kfree(nd_get_link(nd)); + char *buf = nd_get_link(nd); + if (!IS_ERR(buf)) { + /* Free the char* */ + kfree(buf); + } } /** From 9850c056559f3633a32d810aaf00ced39437b364 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 13 Jan 2010 15:01:15 -0500 Subject: [PATCH 0869/1626] Fix the -ESTALE handling in do_filp_open() Instead of playing sick games with path saving, cleanups, just retry the entire thing once with LOOKUP_REVAL added. Post-.34 we'll convert all -ESTALE handling in there to that style, rather than playing with many retry loops deep in the call chain. Signed-off-by: Al Viro --- fs/namei.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index d930f1856ed2..94a5e60779f9 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1604,11 +1604,12 @@ struct file *do_filp_open(int dfd, const char *pathname, struct file *filp; struct nameidata nd; int error; - struct path path, save; + struct path path; struct dentry *dir; int count = 0; int will_truncate; int flag = open_to_namei_flags(open_flag); + int force_reval = 0; /* * O_SYNC is implemented as __O_SYNC|O_DSYNC. As many places only @@ -1660,9 +1661,12 @@ struct file *do_filp_open(int dfd, const char *pathname, /* * Create - we need to know the parent. */ +reval: error = path_init(dfd, pathname, LOOKUP_PARENT, &nd); if (error) return ERR_PTR(error); + if (force_reval) + nd.flags |= LOOKUP_REVAL; error = path_walk(pathname, &nd); if (error) { if (nd.root.mnt) @@ -1854,17 +1858,7 @@ do_link: error = security_inode_follow_link(path.dentry, &nd); if (error) goto exit_dput; - save = nd.path; - path_get(&save); error = __do_follow_link(&path, &nd); - if (error == -ESTALE) { - /* nd.path had been dropped */ - nd.path = save; - path_get(&nd.path); - nd.flags |= LOOKUP_REVAL; - error = __do_follow_link(&path, &nd); - } - path_put(&save); path_put(&path); if (error) { /* Does someone understand code flow here? Or it is only @@ -1874,6 +1868,10 @@ do_link: release_open_intent(&nd); if (nd.root.mnt) path_put(&nd.root); + if (error == -ESTALE && !force_reval) { + force_reval = 1; + goto reval; + } return ERR_PTR(error); } nd.flags &= ~LOOKUP_PARENT; From 9b6e31021122babe3b3a67b102479f740928b5eb Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 13 Jan 2010 22:10:57 -0500 Subject: [PATCH 0870/1626] Fix configfs leak Signed-off-by: Al Viro --- fs/configfs/symlink.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c index c8afa6b1d91d..32a5f46b1157 100644 --- a/fs/configfs/symlink.c +++ b/fs/configfs/symlink.c @@ -121,8 +121,10 @@ static int get_target(const char *symname, struct path *path, ret = -ENOENT; path_put(path); } - } else + } else { ret = -EPERM; + path_put(path); + } } return ret; From abd4d609057dd4faa22837376fdef2433e4c33b1 Mon Sep 17 00:00:00 2001 From: Matt Turner Date: Thu, 14 Jan 2010 13:15:20 -0500 Subject: [PATCH 0871/1626] alpha: add myself as a maintainer, and drop mention of 2.4 CC: Richard Henderson CC: Ivan Kokshaysky CC: linux-alpha@vger.kernel.org Signed-off-by: Matt Turner --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index c8f47bf154f4..3f591629e953 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -410,9 +410,8 @@ F: drivers/i2c/busses/i2c-ali1563.c ALPHA PORT M: Richard Henderson -S: Odd Fixes for 2.4; Maintained for 2.6. M: Ivan Kokshaysky -S: Maintained for 2.4; PCI support for 2.6. +M: Matt Turner L: linux-alpha@vger.kernel.org F: arch/alpha/ From 44c36aed43b57ea12140957bebe76d711fbed653 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 14 Jan 2010 13:21:35 -0500 Subject: [PATCH 0872/1626] alpha: cpumask_of_node() should handle -1 as a node CC: Richard Henderson CC: Ivan Kokshaysky Signed-off-by: Matt Turner CC: linux-alpha@vger.kernel.org CC: Rusty Russell CC: Andrew Morton Signed-off-by: Anton Blanchard --- arch/alpha/include/asm/topology.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/alpha/include/asm/topology.h b/arch/alpha/include/asm/topology.h index 36b3a30ba0e5..9251e13e144f 100644 --- a/arch/alpha/include/asm/topology.h +++ b/arch/alpha/include/asm/topology.h @@ -28,6 +28,9 @@ static const struct cpumask *cpumask_of_node(int node) { int cpu; + if (node == -1) + return cpu_all_mask; + cpumask_clear(&node_to_cpumask_map[node]); for_each_online_cpu(cpu) { From c181a13a41ef32c9037393f4b42b780e1a36eb91 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Tue, 12 Jan 2010 20:20:39 -0200 Subject: [PATCH 0873/1626] ALSA: use subsys_initcall for sound core instead of module_init This is needed for built-in drivers which are built before the sound directory, like thinkpad_acpi. Otherwise, registering a card fails. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Takashi Iwai --- sound/core/sound.c | 4 ++-- sound/sound_core.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/core/sound.c b/sound/core/sound.c index 7872a02f6ca9..563d1967a0ad 100644 --- a/sound/core/sound.c +++ b/sound/core/sound.c @@ -468,5 +468,5 @@ static void __exit alsa_sound_exit(void) unregister_chrdev(major, "alsa"); } -module_init(alsa_sound_init) -module_exit(alsa_sound_exit) +subsys_initcall(alsa_sound_init); +module_exit(alsa_sound_exit); diff --git a/sound/sound_core.c b/sound/sound_core.c index dbca7c909a31..7c2d677a2df5 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -61,7 +61,7 @@ static void __exit cleanup_soundcore(void) class_destroy(sound_class); } -module_init(init_soundcore); +subsys_initcall(init_soundcore); module_exit(cleanup_soundcore); From a0e803a2112398150daa4d88c9d58409e0cf0b6c Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 13 Jan 2010 12:09:08 +0100 Subject: [PATCH 0874/1626] iwmc3200wifi: Add UMAC wifi headers to the pmkid command Without this header, we can trigger a UMAC crash with debug enabled UMACs. Signed-off-by: Samuel Ortiz Signed-off-by: John W. Linville --- drivers/net/wireless/iwmc3200wifi/commands.c | 4 ++++ drivers/net/wireless/iwmc3200wifi/commands.h | 1 + 2 files changed, 5 insertions(+) diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c index 777584d76a88..1e41ad0fcad5 100644 --- a/drivers/net/wireless/iwmc3200wifi/commands.c +++ b/drivers/net/wireless/iwmc3200wifi/commands.c @@ -973,6 +973,10 @@ int iwm_send_pmkid_update(struct iwm_priv *iwm, memset(&update, 0, sizeof(struct iwm_umac_pmkid_update)); + update.hdr.oid = UMAC_WIFI_IF_CMD_PMKID_UPDATE; + update.hdr.buf_size = cpu_to_le16(sizeof(struct iwm_umac_pmkid_update) - + sizeof(struct iwm_umac_wifi_if)); + update.command = cpu_to_le32(command); if (pmksa->bssid) memcpy(&update.bssid, pmksa->bssid, ETH_ALEN); diff --git a/drivers/net/wireless/iwmc3200wifi/commands.h b/drivers/net/wireless/iwmc3200wifi/commands.h index 06af0552cd75..3dfd9f0e9003 100644 --- a/drivers/net/wireless/iwmc3200wifi/commands.h +++ b/drivers/net/wireless/iwmc3200wifi/commands.h @@ -463,6 +463,7 @@ struct iwm_umac_cmd_stop_resume_tx { #define IWM_CMD_PMKID_FLUSH 3 struct iwm_umac_pmkid_update { + struct iwm_umac_wifi_if hdr; __le32 command; u8 bssid[ETH_ALEN]; __le16 reserved; From 5f6120335c701ba07d5151206071f4d6ccaa684f Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Wed, 13 Jan 2010 13:23:14 -0800 Subject: [PATCH 0875/1626] cfg80211: fix channel setting for wext Patch fixes the bug at http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2139 Currently we cannot set the channel using wext extension if we have already associated and disconnected. As cfg80211_mgd_wext_siwfreq will not switch the channel if ssid is set. This fixes it by clearing the ssid. Following is the sequence which it tries to fix. modprobe iwlagn iwconfig wlan0 essid "" ifconfig wlan0 down iwconfig wlan0 chan X wext is marked as deprecate.If we use nl80211 we can easily play with setting the channel. Signed-off-by: Abhijeet Kolekar Acked-by: Samuel Ortiz cc: stable@kernel.org Signed-off-by: John W. Linville --- net/wireless/sme.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/wireless/sme.c b/net/wireless/sme.c index 2333d78187e4..dc0fc4989d54 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -655,6 +655,7 @@ void __cfg80211_disconnected(struct net_device *dev, const u8 *ie, memset(&wrqu, 0, sizeof(wrqu)); wrqu.ap_addr.sa_family = ARPHRD_ETHER; wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); + wdev->wext.connect.ssid_len = 0; #endif } From ea4407834118405ef419e9b07794ceacadc01bae Mon Sep 17 00:00:00 2001 From: NISHIMOTO Hiroki Date: Fri, 15 Jan 2010 08:25:00 +0900 Subject: [PATCH 0876/1626] sh: mach-ecovec24: Add motion sensor driver support. This patch adds support for the lis3lv02d motion sensor connected via i2c on the Ecovec board. Tested with evtest. Signed-off-by: NISHIMOTO Hiroki Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 6a8861b39f05..5c246289b4f0 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -353,6 +353,10 @@ static struct i2c_board_info i2c1_devices[] = { { I2C_BOARD_INFO("r2025sd", 0x32), }, + { + I2C_BOARD_INFO("lis3lv02d", 0x1c), + .irq = 33, + } }; /* KEYSC */ @@ -1115,6 +1119,10 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTU0, 0); mdelay(20); + /* enable motion sensor */ + gpio_request(GPIO_FN_INTC_IRQ1, NULL); + gpio_direction_input(GPIO_FN_INTC_IRQ1); + /* enable I2C device */ i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); From b79d8a65d52d3d80204e1bad30ee57bb5a58ced1 Mon Sep 17 00:00:00 2001 From: Andrea Tacconi Date: Thu, 14 Jan 2010 14:52:37 +0100 Subject: [PATCH 0877/1626] drm/nouveau: add NV18 device id to call_lvds_manufacturer_script This fixes imac black screen (NV18 card) Signed-off-by: Andrea Tacconi Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bios.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index ca2fcdf32b84..03f1ddbaa2df 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -3155,7 +3155,7 @@ static int call_lvds_manufacturer_script(struct drm_device *dev, struct dcb_entr } #ifdef __powerpc__ /* Powerbook specific quirks */ - if (script == LVDS_RESET && ((dev->pci_device & 0xffff) == 0x0179 || (dev->pci_device & 0xffff) == 0x0329)) + if (script == LVDS_RESET && ((dev->pci_device & 0xffff) == 0x0179 || (dev->pci_device & 0xffff) == 0x0189 || (dev->pci_device & 0xffff) == 0x0329)) nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72); if ((dev->pci_device & 0xffff) == 0x0179 || (dev->pci_device & 0xffff) == 0x0189 || (dev->pci_device & 0xffff) == 0x0329) { if (script == LVDS_PANEL_ON) { From 3d9aefb8bd1be2b5e07acf0f938c21769f03cc64 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Thu, 14 Jan 2010 14:56:54 +0100 Subject: [PATCH 0878/1626] drm/nouveau: Break some long lines. Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bios.c | 29 +++++++++++++++++--------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 03f1ddbaa2df..d7f8d8b4a4b8 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -3155,16 +3155,25 @@ static int call_lvds_manufacturer_script(struct drm_device *dev, struct dcb_entr } #ifdef __powerpc__ /* Powerbook specific quirks */ - if (script == LVDS_RESET && ((dev->pci_device & 0xffff) == 0x0179 || (dev->pci_device & 0xffff) == 0x0189 || (dev->pci_device & 0xffff) == 0x0329)) - nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72); - if ((dev->pci_device & 0xffff) == 0x0179 || (dev->pci_device & 0xffff) == 0x0189 || (dev->pci_device & 0xffff) == 0x0329) { - if (script == LVDS_PANEL_ON) { - bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL, bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL) | (1 << 31)); - bios_wr32(bios, NV_PCRTC_GPIO_EXT, bios_rd32(bios, NV_PCRTC_GPIO_EXT) | 1); - } - if (script == LVDS_PANEL_OFF) { - bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL, bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL) & ~(1 << 31)); - bios_wr32(bios, NV_PCRTC_GPIO_EXT, bios_rd32(bios, NV_PCRTC_GPIO_EXT) & ~3); + if ((dev->pci_device & 0xffff) == 0x0179 || + (dev->pci_device & 0xffff) == 0x0189 || + (dev->pci_device & 0xffff) == 0x0329) { + if (script == LVDS_RESET) { + nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72); + + } else if (script == LVDS_PANEL_ON) { + bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL, + bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL) + | (1 << 31)); + bios_wr32(bios, NV_PCRTC_GPIO_EXT, + bios_rd32(bios, NV_PCRTC_GPIO_EXT) | 1); + + } else if (script == LVDS_PANEL_OFF) { + bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL, + bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL) + & ~(1 << 31)); + bios_wr32(bios, NV_PCRTC_GPIO_EXT, + bios_rd32(bios, NV_PCRTC_GPIO_EXT) & ~3); } } #endif From c8ebe275790f2c5efc3ffec515c93b7a139829d3 Mon Sep 17 00:00:00 2001 From: Xavier Chantry Date: Mon, 11 Jan 2010 22:42:21 +0100 Subject: [PATCH 0879/1626] drm/nouveau: fix edid memleak in nouveau_connector This was spotted by kmemleak. Signed-off-by: Xavier Chantry Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_connector.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 5a10deb8bdbd..54c85305a0fb 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -83,14 +83,16 @@ nouveau_encoder_connector_get(struct nouveau_encoder *encoder) static void nouveau_connector_destroy(struct drm_connector *drm_connector) { - struct nouveau_connector *connector = nouveau_connector(drm_connector); - struct drm_device *dev = connector->base.dev; + struct nouveau_connector *nv_connector = + nouveau_connector(drm_connector); + struct drm_device *dev = nv_connector->base.dev; NV_DEBUG_KMS(dev, "\n"); - if (!connector) + if (!nv_connector) return; + kfree(nv_connector->edid); drm_sysfs_connector_remove(drm_connector); drm_connector_cleanup(drm_connector); kfree(drm_connector); @@ -237,6 +239,9 @@ nouveau_connector_detect(struct drm_connector *connector) return connector_status_connected; } + kfree(nv_connector->edid); + nv_connector->edid = NULL; + i2c = nouveau_connector_ddc_detect(connector, &nv_encoder); if (i2c) { nouveau_connector_ddc_prepare(connector, &flags); @@ -687,8 +692,12 @@ nouveau_connector_create_lvds(struct drm_device *dev, */ if (!nv_connector->edid && !nv_connector->native_mode && !dev_priv->VBIOS.pub.fp_no_ddc) { - nv_connector->edid = + struct edid *edid = (struct edid *)nouveau_bios_embedded_edid(dev); + if (edid) { + nv_connector->edid = kmalloc(EDID_LENGTH, GFP_KERNEL); + *(nv_connector->edid) = *edid; + } } if (!nv_connector->edid) From 0ed3165e55fdedee6fc04b757907a2d5ccacdf18 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Thu, 14 Jan 2010 15:47:03 +0100 Subject: [PATCH 0880/1626] drm/nouveau: Fallback to analog load detection when the EDID block is invalid. Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_connector.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 54c85305a0fb..3dc7e09da286 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -252,7 +252,7 @@ nouveau_connector_detect(struct drm_connector *connector) if (!nv_connector->edid) { NV_ERROR(dev, "DDC responded, but no EDID for %s\n", drm_get_connector_name(connector)); - return connector_status_disconnected; + goto detect_analog; } if (nv_encoder->dcb->type == OUTPUT_DP && @@ -286,6 +286,7 @@ nouveau_connector_detect(struct drm_connector *connector) return connector_status_connected; } +detect_analog: nv_encoder = find_encoder_by_type(connector, OUTPUT_ANALOG); if (!nv_encoder) nv_encoder = find_encoder_by_type(connector, OUTPUT_TV); From b8780e2ad20feb8d086bc961a678e8fdb4fa296b Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Thu, 14 Jan 2010 15:54:23 +0100 Subject: [PATCH 0881/1626] drm/nouveau: Unset the EDID connector property when the EDID block goes away. Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_connector.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 3dc7e09da286..8da35281a0c3 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -239,8 +239,12 @@ nouveau_connector_detect(struct drm_connector *connector) return connector_status_connected; } - kfree(nv_connector->edid); - nv_connector->edid = NULL; + /* Cleanup the previous EDID block. */ + if (nv_connector->edid) { + drm_mode_connector_update_edid_property(connector, NULL); + kfree(nv_connector->edid); + nv_connector->edid = NULL; + } i2c = nouveau_connector_ddc_detect(connector, &nv_encoder); if (i2c) { From ac8fb975e8c88d312a376b035494be17548d01c6 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 15 Jan 2010 09:24:20 +1000 Subject: [PATCH 0882/1626] drm/nouveau: reserve VGA area for the moment This is to prevent things such as GART tables and other important GPU structures being allocated there before we take over fbcon ourselves. This is more of a workaround for the moment, a better solution will require some more invasive changes, but it'll be done at some point. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drv.h | 2 ++ drivers/gpu/drm/nouveau/nouveau_mem.c | 13 +++++++++++++ 2 files changed, 15 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 026419fe8791..cc36866e2a9f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -509,6 +509,8 @@ struct drm_nouveau_private { void __iomem *ramin; uint32_t ramin_size; + struct nouveau_bo *vga_ram; + struct workqueue_struct *wq; struct work_struct irq_work; diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c index be4c7781d761..186f34b01f2e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mem.c +++ b/drivers/gpu/drm/nouveau/nouveau_mem.c @@ -383,6 +383,9 @@ void nouveau_mem_close(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; + nouveau_bo_unpin(dev_priv->vga_ram); + nouveau_bo_ref(NULL, &dev_priv->vga_ram); + ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM); ttm_bo_device_release(&dev_priv->ttm.bdev); @@ -619,6 +622,15 @@ nouveau_mem_init(struct drm_device *dev) return ret; } + ret = nouveau_bo_new(dev, NULL, 256*1024, 0, TTM_PL_FLAG_VRAM, + 0, 0, true, true, &dev_priv->vga_ram); + if (ret == 0) + ret = nouveau_bo_pin(dev_priv->vga_ram, TTM_PL_FLAG_VRAM); + if (ret) { + NV_WARN(dev, "failed to reserve VGA memory\n"); + nouveau_bo_ref(NULL, &dev_priv->vga_ram); + } + /* GART */ #if !defined(__powerpc__) && !defined(__ia64__) if (drm_device_is_agp(dev) && dev->agp) { @@ -650,6 +662,7 @@ nouveau_mem_init(struct drm_device *dev) dev_priv->fb_mtrr = drm_mtrr_add(drm_get_resource_start(dev, 1), drm_get_resource_len(dev, 1), DRM_MTRR_WC); + return 0; } From 75136d48e85915fd78a072f22897622b5d4c1814 Mon Sep 17 00:00:00 2001 From: Markus Pietrek Date: Fri, 15 Jan 2010 08:33:20 +0900 Subject: [PATCH 0883/1626] serial: sh-sci: using correct fifo size for SCIF and SCIFA ports. The sh-sci driver used the wrong fifosize for PORT_SCIFA and PORT_SCIF ports. If an incorrect size is used, the serial core will enforce an early shutdown on the port, especially with baudrates < 9600. Signed-off-by: Markus Pietrek Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 37f0de9dd9ce..42f3333c4ad0 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1052,7 +1052,18 @@ static void __devinit sci_init_single(struct platform_device *dev, sci_port->port.ops = &sci_uart_ops; sci_port->port.iotype = UPIO_MEM; sci_port->port.line = index; - sci_port->port.fifosize = 1; + + switch (p->type) { + case PORT_SCIFA: + sci_port->port.fifosize = 64; + break; + case PORT_SCIF: + sci_port->port.fifosize = 16; + break; + default: + sci_port->port.fifosize = 1; + break; + } if (dev) { sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL; From 12f735b79f0ad63964dedabed3eee8a581bb66a5 Mon Sep 17 00:00:00 2001 From: Luca Barbieri Date: Sun, 10 Jan 2010 20:10:53 +0100 Subject: [PATCH 0884/1626] drm/nouveau: check pushbuffer bounds in ioctl Currently there is no check that the pushbuffer request bounds are inside the TTM BO. This allows to instruct the kernel to do relocations on user-selected addresses, since the relocation bounds checking relies on the request bounds. This can oops the kernel accidentally and is easily exploitable. This patch adds bound checking and alignment checking for ->offset and ->nr_dwords. It also makes some variables unsigned, which should have no effect, but prevents possible bounds checking problems. Signed-off-by: Luca Barbieri Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_gem.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c index 2009db2426c3..504833044080 100644 --- a/drivers/gpu/drm/nouveau/nouveau_gem.c +++ b/drivers/gpu/drm/nouveau/nouveau_gem.c @@ -466,13 +466,14 @@ u_memcpya(uint64_t user, unsigned nmemb, unsigned size) static int nouveau_gem_pushbuf_reloc_apply(struct nouveau_channel *chan, int nr_bo, struct drm_nouveau_gem_pushbuf_bo *bo, - int nr_relocs, uint64_t ptr_relocs, - int nr_dwords, int first_dword, + unsigned nr_relocs, uint64_t ptr_relocs, + unsigned nr_dwords, unsigned first_dword, uint32_t *pushbuf, bool is_iomem) { struct drm_nouveau_gem_pushbuf_reloc *reloc = NULL; struct drm_device *dev = chan->dev; - int ret = 0, i; + int ret = 0; + unsigned i; reloc = u_memcpya(ptr_relocs, nr_relocs, sizeof(*reloc)); if (IS_ERR(reloc)) @@ -667,6 +668,18 @@ nouveau_gem_ioctl_pushbuf_call(struct drm_device *dev, void *data, } pbbo = nouveau_gem_object(gem); + if ((req->offset & 3) || req->nr_dwords < 2 || + (unsigned long)req->offset > (unsigned long)pbbo->bo.mem.size || + (unsigned long)req->nr_dwords > + ((unsigned long)(pbbo->bo.mem.size - req->offset ) >> 2)) { + NV_ERROR(dev, "pb call misaligned or out of bounds: " + "%d + %d * 4 > %ld\n", + req->offset, req->nr_dwords, pbbo->bo.mem.size); + ret = -EINVAL; + drm_gem_object_unreference(gem); + goto out; + } + ret = ttm_bo_reserve(&pbbo->bo, false, false, true, chan->fence.sequence); if (ret) { From d3cf4489d5a50ca9dc82473cd105f97fc7f720e0 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 13 Jan 2010 13:57:04 +0000 Subject: [PATCH 0885/1626] ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulator Since the fixed voltage regulator grew support for GPIO based enables and GPIO 0 is valid on some systems we need to specify that there is no valid GPIO enable control. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-smdk6410.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 480d297c1de2..8969fe73b83f 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -211,6 +211,7 @@ static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = { .supply_name = "B_PWR_5V", .microvolts = 5000000, .init_data = &smdk6410_b_pwr_5v_data, + .gpio = -EINVAL, }; static struct platform_device smdk6410_b_pwr_5v = { From 9f4f04ba2b117a5c741d019629d7ffccdc621122 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Tue, 29 Dec 2009 05:10:58 +0000 Subject: [PATCH 0886/1626] powerpc/8xx: Always pin kernel instruction TLB Various kernel asm modifies SRR0/SRR1 just before executing a rfi. If such code crosses a page boundary you risk a TLB miss which will clobber SRR0/SRR1. Avoid this by always pinning kernel instruction TLB space. Signed-off-by: Joakim Tjernlund Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/head_8xx.S | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 678f98cd5e64..a2ed3422fa3d 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -768,12 +768,12 @@ start_here: */ initial_mmu: tlbia /* Invalidate all TLB entries */ -#ifdef CONFIG_PIN_TLB +/* Always pin the first 8 MB ITLB to prevent ITLB + misses while mucking around with SRR0/SRR1 in asm +*/ lis r8, MI_RSV4I@h ori r8, r8, 0x1c00 -#else - li r8, 0 -#endif + mtspr SPRN_MI_CTR, r8 /* Set instruction MMU control */ #ifdef CONFIG_PIN_TLB From e443ed35606cf921cbf9d6949010a5b36bbe747d Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 30 Dec 2009 07:40:17 +0000 Subject: [PATCH 0887/1626] powerpc/swsusp_32: Fix TLB invalidation It seems there is a thinko in the TLB invalidation code that makes the tlbie in the loop executed just once. The intended check was probably 'gt', not 'lt'. Signed-off-by: Anton Vorontsov Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/swsusp_32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S index b47d8ceffb52..b0754e237438 100644 --- a/arch/powerpc/kernel/swsusp_32.S +++ b/arch/powerpc/kernel/swsusp_32.S @@ -303,7 +303,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS) lis r4,0x1000 1: addic. r4,r4,-0x1000 tlbie r4 - blt 1b + bgt 1b sync /* restore the MSR and turn on the MMU */ From 92cb3694dd8da8769f9415790e169b9cf3a16fcb Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 4 Jan 2010 15:26:33 +0000 Subject: [PATCH 0888/1626] powerpc/pseries: Fix xics interrupt affinity Commit 57b150cce8e004ddd36330490a68bfb59b7271e9 (irq: only update affinity if ->set_affinity() is sucessfull) broke xics irq affinity. We need to use the cpumask passed in, instead of accessing ->affinity directly. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/xics.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index b9b9e11609ec..d80f193cd871 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -163,14 +163,13 @@ static inline void lpar_qirr_info(int n_cpu , u8 value) /* Interface to generic irq subsystem */ #ifdef CONFIG_SMP -static int get_irq_server(unsigned int virq, unsigned int strict_check) +static int get_irq_server(unsigned int virq, cpumask_t cpumask, + unsigned int strict_check) { int server; /* For the moment only implement delivery to all cpus or one cpu */ - cpumask_t cpumask; cpumask_t tmp = CPU_MASK_NONE; - cpumask_copy(&cpumask, irq_to_desc(virq)->affinity); if (!distribute_irqs) return default_server; @@ -192,7 +191,8 @@ static int get_irq_server(unsigned int virq, unsigned int strict_check) return default_server; } #else -static int get_irq_server(unsigned int virq, unsigned int strict_check) +static int get_irq_server(unsigned int virq, cpumask_t cpumask, + unsigned int strict_check) { return default_server; } @@ -211,7 +211,7 @@ static void xics_unmask_irq(unsigned int virq) if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) return; - server = get_irq_server(virq, 0); + server = get_irq_server(virq, *(irq_to_desc(virq)->affinity), 0); call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server, DEFAULT_PRIORITY); @@ -405,7 +405,7 @@ static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask) * For the moment only implement delivery to all cpus or one cpu. * Get current irq_server for the given irq */ - irq_server = get_irq_server(virq, 1); + irq_server = get_irq_server(virq, *cpumask, 1); if (irq_server == -1) { char cpulist[128]; cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask); From 46150a050f7a329bf570462dc6df3330cafee926 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 5 Jan 2010 00:49:02 +0000 Subject: [PATCH 0889/1626] powerpc/pseries: Fix dlpar compile warning without CONFIG_PROC_DEVICETREE cc1: warnings being treated as errors arch/powerpc/platforms/pseries/dlpar.c: In function 'dlpar_attach_node': arch/powerpc/platforms/pseries/dlpar.c:239: error: unused variable 'ent' arch/powerpc/platforms/pseries/dlpar.c: In function 'dlpar_detach_node': arch/powerpc/platforms/pseries/dlpar.c:271: error: unused variable 'prop' arch/powerpc/platforms/pseries/dlpar.c:270: error: unused variable 'parent' make[3]: *** [arch/powerpc/platforms/pseries/dlpar.o] Error 1 Signed-off-by: FUJITA Tomonori Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/dlpar.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index 67b7a10f9fce..3bd8df8af70b 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -236,7 +236,9 @@ static struct device_node *derive_parent(const char *path) int dlpar_attach_node(struct device_node *dn) { +#ifdef CONFIG_PROC_DEVICETREE struct proc_dir_entry *ent; +#endif int rc; of_node_set_flag(dn, OF_DYNAMIC); @@ -267,10 +269,10 @@ int dlpar_attach_node(struct device_node *dn) int dlpar_detach_node(struct device_node *dn) { +#ifdef CONFIG_PROC_DEVICETREE struct device_node *parent = dn->parent; struct property *prop = dn->properties; -#ifdef CONFIG_PROC_DEVICETREE while (prop) { remove_proc_entry(prop->name, dn->pde); prop = prop->next; From c81b812a333818c5cc1be2e086c8509d853ebeeb Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 5 Jan 2010 18:55:10 +0000 Subject: [PATCH 0890/1626] powerpc: cpumask_of_node() should handle -1 as a node pcibus_to_node can return -1 if we cannot determine which node a pci bus is on. If passed -1, cpumask_of_node will negatively index the lookup array and pull in random data: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus 00000000,00000003,00000000,00000000 # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 64-65 Change cpumask_of_node to check for -1 and return cpu_all_mask in this case: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus ffffffff,ffffffff,ffffffff,ffffffff # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 0-127 Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/topology.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index 22f738d12ad9..bbf89701d7a4 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -17,7 +17,9 @@ static inline int cpu_to_node(int cpu) #define parent_node(node) (node) -#define cpumask_of_node(node) (&numa_cpumask_lookup_table[node]) +#define cpumask_of_node(node) ((node) == -1 ? \ + cpu_all_mask : \ + &numa_cpumask_lookup_table[node]) int of_node_to_nid(struct device_node *device); From 4bf936b9e484bb8ee5f32bfd1351893810864f58 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 6 Jan 2010 05:24:31 +0000 Subject: [PATCH 0891/1626] powerpc: Use helpers for rlimits Make sure compiler won't do weird things with limits. E.g. fetching them twice may return 2 different values after writable limits are implemented. I.e. either use rlimit helpers added in 3e10e716abf3c71bdb5d86b8f507f9e72236c9cd or ACCESS_ONCE if not applicable. Signed-off-by: Jiri Slaby Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: linuxppc-dev@ozlabs.org Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/mmap_64.c | 4 ++-- arch/powerpc/platforms/cell/spufs/coredump.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/mm/mmap_64.c b/arch/powerpc/mm/mmap_64.c index 0d957a4c70fe..5a783d8e8e8e 100644 --- a/arch/powerpc/mm/mmap_64.c +++ b/arch/powerpc/mm/mmap_64.c @@ -47,7 +47,7 @@ static inline int mmap_is_legacy(void) if (current->personality & ADDR_COMPAT_LAYOUT) return 1; - if (current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY) + if (rlimit(RLIMIT_STACK) == RLIM_INFINITY) return 1; return sysctl_legacy_va_layout; @@ -77,7 +77,7 @@ static unsigned long mmap_rnd(void) static inline unsigned long mmap_base(void) { - unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur; + unsigned long gap = rlimit(RLIMIT_STACK); if (gap < MIN_GAP) gap = MIN_GAP; diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c index c4d4a19235e0..eea120229cdb 100644 --- a/arch/powerpc/platforms/cell/spufs/coredump.c +++ b/arch/powerpc/platforms/cell/spufs/coredump.c @@ -54,7 +54,7 @@ static ssize_t do_coredump_read(int num, struct spu_context *ctx, void *buffer, */ static int spufs_dump_write(struct file *file, const void *addr, int nr, loff_t *foffset) { - unsigned long limit = current->signal->rlim[RLIMIT_CORE].rlim_cur; + unsigned long limit = rlimit(RLIMIT_CORE); ssize_t written; if (*foffset + nr > limit) From 46759a7c132648d79121518d2f7c34edc3f0cf58 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?M=C3=A1rton=20N=C3=A9meth?= Date: Sun, 10 Jan 2010 01:43:14 +0000 Subject: [PATCH 0892/1626] powerpc/macintosh: Make Open Firmware device id constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The match_table field of the struct of_device_id is constant in so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Márton Németh Cc: Julia Lawall Cc: cocci@diku.dk Signed-off-by: Benjamin Herrenschmidt --- drivers/macintosh/smu.c | 2 +- drivers/macintosh/therm_pm72.c | 2 +- drivers/macintosh/therm_windtunnel.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index 96faa799b82a..f96feeb6b9ce 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -660,7 +660,7 @@ static int smu_platform_probe(struct of_device* dev, return 0; } -static struct of_device_id smu_platform_match[] = +static const struct of_device_id smu_platform_match[] = { { .type = "smu", diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index ea32c7e5a9af..454bc501df3c 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -2211,7 +2211,7 @@ static int fcu_of_remove(struct of_device* dev) return 0; } -static struct of_device_id fcu_match[] = +static const struct of_device_id fcu_match[] = { { .type = "fcu", diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index 3fbe41b0ac07..ba48fd76396e 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -457,7 +457,7 @@ therm_of_remove( struct of_device *dev ) return 0; } -static struct of_device_id therm_of_match[] = {{ +static const struct of_device_id therm_of_match[] = {{ .name = "fan", .compatible = "adm1030" }, {} From 02ab851324dc7e2fc75787f7fae71187092be7ed Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 10 Jan 2010 17:51:42 +0000 Subject: [PATCH 0893/1626] serial/pmac_zilog: Workaround problem due to interrupt on closed port It seems that in qemu, we can see an interrupt in R3 despite the fact that it's masked in W1. The chip doesn't actually issue an interrupt, but we can "see" it when taking an interrupt for the other channel. This may be a qemu bug ... or not, so let's be safe and avoid calling into the UART layer when that happens which woulc cause a crash. Signed-off-by: Benjamin Herrenschmidt Acked-by: Rob Landley --- drivers/serial/pmac_zilog.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 0700cd10b97c..683e66f18e8c 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -411,6 +411,17 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap) goto ack_tx_int; } + /* Under some circumstances, we see interrupts reported for + * a closed channel. The interrupt mask in R1 is clear, but + * R3 still signals the interrupts and we see them when taking + * an interrupt for the other channel (this could be a qemu + * bug but since the ESCC doc doesn't specify precsiely whether + * R3 interrup status bits are masked by R1 interrupt enable + * bits, better safe than sorry). --BenH. + */ + if (!ZS_IS_OPEN(uap)) + goto ack_tx_int; + if (uap->port.x_char) { uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; write_zsdata(uap, uap->port.x_char); From aa8b83cb0b48e3cac58a3b75ad9c556564c5fe9d Mon Sep 17 00:00:00 2001 From: Kamalesh Babulal Date: Fri, 25 Sep 2009 03:31:43 +0000 Subject: [PATCH 0894/1626] powerpc/hvc: Driver build breaks with !HVC_CONSOLE Hi Stephen, next-20090925 randconfig build breaks on hvcs driver on powerpc, with HVC_CONSOLE=n. ERROR: ".hvc_put_chars" [drivers/char/hvcs.ko] undefined! ERROR: ".hvc_get_chars" [drivers/char/hvcs.ko] undefined! adding the dependency of HVC_CONSOLE helped Signed-off-by: Kamalesh Babulal Signed-off-by: Benjamin Herrenschmidt --- drivers/char/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 31be3ac2e21b..e023682be2c4 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -669,7 +669,7 @@ config VIRTIO_CONSOLE config HVCS tristate "IBM Hypervisor Virtual Console Server support" - depends on PPC_PSERIES + depends on PPC_PSERIES && HVC_CONSOLE help Partitionable IBM Power5 ppc64 machines allow hosting of firmware virtual consoles from one Linux partition by From b0ff153cd6228b2502e1c3ce5e226b82ae4e0679 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 12 Jan 2010 21:10:56 +0000 Subject: [PATCH 0895/1626] powerpc/iseries: Initialise on-stack completion get_viotape_info() declares a vio_waitevent on the stack, which contains a completion, but never initialises the completion. I have no idea how this ever worked, and on recent kernels it causes an oops in handle_tape_event() when we access the non-initialised completion. Signed-off-by: Michael Ellerman Acked-by: Stephen Rothwell Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/iseries/vio.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c index 657b72f68493..2aa8b5631beb 100644 --- a/arch/powerpc/platforms/iseries/vio.c +++ b/arch/powerpc/platforms/iseries/vio.c @@ -474,6 +474,8 @@ static void __init get_viotape_info(struct device_node *vio_root) struct vio_waitevent we; int ret; + init_completion(&we.com); + ret = viopath_open(viopath_hostLp, viomajorsubtype_tape, 2); if (ret) { printk(KERN_WARNING "get_viotape_info: " From 3e7b484354c8f60c12119c1c5174ef354696c30d Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 11 Jan 2010 22:28:54 +0000 Subject: [PATCH 0896/1626] powerpc: Fix decrementer setup on 1GHz boards We noticed that recent kernels didn't boot on our 1GHz Canyonlands 460EX boards anymore. As it seems, patch 8d165db1 [powerpc: Improve decrementer accuracy] introduced this problem. The routine div_sc() overflows with shift = 32 resulting in this incorrect setup: time_init: decrementer frequency = 1000.000012 MHz time_init: processor frequency = 1000.000012 MHz clocksource: timebase mult[400000] shift[22] registered clockevent: decrementer mult[33] shift[32] cpu[0] This patch now introduces a local div_dc64() version of this function so that this overflow doesn't happen anymore. Signed-off-by: Stefan Roese Cc: Benjamin Herrenschmidt Cc: Detlev Zundel Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/time.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 9ba2cc88591d..6c6093d67f30 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -903,12 +903,21 @@ static void decrementer_set_mode(enum clock_event_mode mode, decrementer_set_next_event(DECREMENTER_MAX, dev); } +static inline uint64_t div_sc64(unsigned long ticks, unsigned long nsec, + int shift) +{ + uint64_t tmp = ((uint64_t)ticks) << shift; + + do_div(tmp, nsec); + return tmp; +} + static void __init setup_clockevent_multiplier(unsigned long hz) { u64 mult, shift = 32; while (1) { - mult = div_sc(hz, NSEC_PER_SEC, shift); + mult = div_sc64(hz, NSEC_PER_SEC, shift); if (mult && (mult >> 32UL) == 0UL) break; From 061ec9599f7ea515a3f08cd5cb74a03b2f9c56d2 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Fri, 8 Jan 2010 06:46:26 +0000 Subject: [PATCH 0897/1626] powerpc/8xx: Fix user space TLB walk in dcbX fixup The newly added fixup for buggy dcbX insn's has a bug that always trigger a kernel TLB walk so a user space dcbX insn will cause a Kernel Machine Check if it hits DTLB error. Signed-off-by: Joakim Tjernlund Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/head_8xx.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index a2ed3422fa3d..3ef743fa5d7c 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -542,11 +542,11 @@ DARFixed:/* Return from dcbx instruction bug workaround, r10 holds value of DAR FixupDAR:/* Entry point for dcbx workaround. */ /* fetch instruction from memory. */ mfspr r10, SPRN_SRR0 + andis. r11, r10, 0x8000 /* Address >= 0x80000000 */ DO_8xx_CPU6(0x3780, r3) mtspr SPRN_MD_EPN, r10 mfspr r11, SPRN_M_TWB /* Get level 1 table entry address */ - cmplwi cr0, r11, 0x0800 - blt- 3f /* Branch if user space */ + beq- 3f /* Branch if user space */ lis r11, (swapper_pg_dir-PAGE_OFFSET)@h ori r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l rlwimi r11, r10, 32-20, 0xffc /* r11 = r11&~0xffc|(r10>>20)&0xffc */ From 9becd2a0d6a7996669a606b9da33cee6d413acb0 Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Thu, 14 Jan 2010 09:45:58 +0000 Subject: [PATCH 0898/1626] powerpc: Move /proc/ppc64 to /proc/powerpc update It looks like the previous patch sent out to move RTAS and other items from /proc/ppc64 to /proc/powerpc missed a few files needed for RAS and DLPAR functionality. Original Patch here: http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-September/076096.html This patch updates the remaining files to be created under /proc/powerpc. Signed-off-by: Nathan Fontenot Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/rtas-proc.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c index 1be9fe38bcb5..8777fb02349f 100644 --- a/arch/powerpc/kernel/rtas-proc.c +++ b/arch/powerpc/kernel/rtas-proc.c @@ -262,19 +262,19 @@ static int __init proc_rtas_init(void) if (rtas_node == NULL) return -ENODEV; - proc_create("ppc64/rtas/progress", S_IRUGO|S_IWUSR, NULL, + proc_create("powerpc/rtas/progress", S_IRUGO|S_IWUSR, NULL, &ppc_rtas_progress_operations); - proc_create("ppc64/rtas/clock", S_IRUGO|S_IWUSR, NULL, + proc_create("powerpc/rtas/clock", S_IRUGO|S_IWUSR, NULL, &ppc_rtas_clock_operations); - proc_create("ppc64/rtas/poweron", S_IWUSR|S_IRUGO, NULL, + proc_create("powerpc/rtas/poweron", S_IWUSR|S_IRUGO, NULL, &ppc_rtas_poweron_operations); - proc_create("ppc64/rtas/sensors", S_IRUGO, NULL, + proc_create("powerpc/rtas/sensors", S_IRUGO, NULL, &ppc_rtas_sensors_operations); - proc_create("ppc64/rtas/frequency", S_IWUSR|S_IRUGO, NULL, + proc_create("powerpc/rtas/frequency", S_IWUSR|S_IRUGO, NULL, &ppc_rtas_tone_freq_operations); - proc_create("ppc64/rtas/volume", S_IWUSR|S_IRUGO, NULL, + proc_create("powerpc/rtas/volume", S_IWUSR|S_IRUGO, NULL, &ppc_rtas_tone_volume_operations); - proc_create("ppc64/rtas/rmo_buffer", S_IRUSR, NULL, + proc_create("powerpc/rtas/rmo_buffer", S_IRUSR, NULL, &ppc_rtas_rmo_buf_ops); return 0; } From d0174c721900ff807b95ac4ab23191ffcb7511c7 Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Thu, 14 Jan 2010 09:52:44 +0000 Subject: [PATCH 0899/1626] powerpc: Move cpu hotplug driver lock from pseries to powerpc Move the defintion and lock helper routines for the cpu hotplug driver lock from pseries to powerpc code to avoid build breaks for platforms other than pseries that use cpu hotplug. Signed-off-by: Nathan Fontenot Acked-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/smp.c | 12 ++++++++++++ arch/powerpc/platforms/pseries/dlpar.c | 14 -------------- 2 files changed, 12 insertions(+), 14 deletions(-) diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index a521fb8a40ee..c2ee14498077 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -619,4 +619,16 @@ void __cpu_die(unsigned int cpu) if (smp_ops->cpu_die) smp_ops->cpu_die(cpu); } + +static DEFINE_MUTEX(powerpc_cpu_hotplug_driver_mutex); + +void cpu_hotplug_driver_lock() +{ + mutex_lock(&powerpc_cpu_hotplug_driver_mutex); +} + +void cpu_hotplug_driver_unlock() +{ + mutex_unlock(&powerpc_cpu_hotplug_driver_mutex); +} #endif diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index 3bd8df8af70b..37bce52526da 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -346,20 +346,6 @@ int dlpar_release_drc(u32 drc_index) #ifdef CONFIG_ARCH_CPU_PROBE_RELEASE -static DEFINE_MUTEX(pseries_cpu_hotplug_mutex); - -void cpu_hotplug_driver_lock(void) -__acquires(pseries_cpu_hotplug_mutex) -{ - mutex_lock(&pseries_cpu_hotplug_mutex); -} - -void cpu_hotplug_driver_unlock(void) -__releases(pseries_cpu_hotplug_mutex) -{ - mutex_unlock(&pseries_cpu_hotplug_mutex); -} - static int dlpar_online_cpu(struct device_node *dn) { int rc = 0; From 79b7dcb2af7da728819cf060b94ce8c9ead36f7e Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 14 Jan 2010 19:02:20 +0100 Subject: [PATCH 0900/1626] drm: EDID accept separate sync video mode X is accepting such video mode, do the same. Pointed out by Joshua Roys on IRC. Fix https://bugzilla.redhat.com/show_bug.cgi?id=540024 [fix printf to use composite not integrated :- airlied] Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index defcaf108460..f665b05592f3 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -633,8 +633,7 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, return NULL; } if (!(pt->misc & DRM_EDID_PT_SEPARATE_SYNC)) { - printk(KERN_WARNING "integrated sync not supported\n"); - return NULL; + printk(KERN_WARNING "composite sync not supported\n"); } /* it is incorrect if hsync/vsync width is zero */ From 751e9983ee276cb150e8812b1d995f6035a63878 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 14 Jan 2010 10:53:02 +0800 Subject: [PATCH 0901/1626] ftrace: Fix MATCH_END_ONLY function filter For '*foo' pattern, we should allow any string ending with 'foo', but ftrace filter incorrectly disallows strings like bar_foo_foo: # echo '*io' > set_ftrace_filter # cat set_ftrace_filter | grep 'req_bio_endio' # cat available_filter_functions | grep 'req_bio_endio' req_bio_endio Signed-off-by: Li Zefan LKML-Reference: <4B4E870E.6060607@cn.fujitsu.com> Acked-by: Frederic Weisbecker Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 7968762c8167..1e6640f80454 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -1690,7 +1690,7 @@ ftrace_regex_lseek(struct file *file, loff_t offset, int origin) static int ftrace_match(char *str, char *regex, int len, int type) { int matched = 0; - char *ptr; + int slen; switch (type) { case MATCH_FULL: @@ -1706,8 +1706,8 @@ static int ftrace_match(char *str, char *regex, int len, int type) matched = 1; break; case MATCH_END_ONLY: - ptr = strstr(str, regex); - if (ptr && (ptr[len] == 0)) + slen = strlen(str); + if (slen >= len && memcmp(str + slen - len, regex, len) == 0) matched = 1; break; } From 285caad415f459f336247932b4db95a571357a02 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 14 Jan 2010 10:53:21 +0800 Subject: [PATCH 0902/1626] tracing/filters: Fix MATCH_FRONT_ONLY filter matching MATCH_FRONT_ONLY actually is a full matching: # ./perf record -R -f -a -e lock:lock_acquire \ --filter 'name ~rcu_*' sleep 1 # ./perf trace (no output) We should pass the length of the pattern string to strncmp(). Signed-off-by: Li Zefan LKML-Reference: <4B4E8721.5090301@cn.fujitsu.com> Acked-by: Frederic Weisbecker Signed-off-by: Steven Rostedt --- kernel/trace/trace_events_filter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c index 50504cb228de..11c3973e6552 100644 --- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -261,7 +261,7 @@ static int regex_match_full(char *str, struct regex *r, int len) static int regex_match_front(char *str, struct regex *r, int len) { - if (strncmp(str, r->pattern, len) == 0) + if (strncmp(str, r->pattern, r->len) == 0) return 1; return 0; } From a3291c14ecf0a995e30d993b7f2cae031de98727 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 14 Jan 2010 10:53:41 +0800 Subject: [PATCH 0903/1626] tracing/filters: Fix MATCH_END_ONLY filter matching For '*foo' pattern, we should allow any string ending with 'foo', but event filtering incorrectly disallows strings like bar_foo_foo: Signed-off-by: Li Zefan LKML-Reference: <4B4E8735.6070604@cn.fujitsu.com> Acked-by: Frederic Weisbecker Signed-off-by: Steven Rostedt --- kernel/trace/trace_events_filter.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c index 11c3973e6552..49e44dd17851 100644 --- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -275,9 +275,10 @@ static int regex_match_middle(char *str, struct regex *r, int len) static int regex_match_end(char *str, struct regex *r, int len) { - char *ptr = strstr(str, r->pattern); + int strlen = len - 1; - if (ptr && (ptr[r->len] == 0)) + if (strlen >= r->len && + memcmp(str + strlen - r->len, r->pattern, r->len) == 0) return 1; return 0; } From d5f1fb53353edc38da326445267c1df0c9676df2 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 14 Jan 2010 10:53:55 +0800 Subject: [PATCH 0904/1626] lib: Introduce strnstr() It differs strstr() in that it limits the length to be searched in the first string. Signed-off-by: Li Zefan LKML-Reference: <4B4E8743.6030805@cn.fujitsu.com> Acked-by: Frederic Weisbecker Signed-off-by: Steven Rostedt --- include/linux/string.h | 5 ++++- lib/string.c | 27 ++++++++++++++++++++++++++- 2 files changed, 30 insertions(+), 2 deletions(-) diff --git a/include/linux/string.h b/include/linux/string.h index 651839a2a755..a716ee2a8adb 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -72,7 +72,10 @@ static inline __must_check char *strstrip(char *str) } #ifndef __HAVE_ARCH_STRSTR -extern char * strstr(const char *,const char *); +extern char * strstr(const char *, const char *); +#endif +#ifndef __HAVE_ARCH_STRNSTR +extern char * strnstr(const char *, const char *, size_t); #endif #ifndef __HAVE_ARCH_STRLEN extern __kernel_size_t strlen(const char *); diff --git a/lib/string.c b/lib/string.c index 9f75b4ec50b8..a1cdcfcc42d0 100644 --- a/lib/string.c +++ b/lib/string.c @@ -667,7 +667,7 @@ EXPORT_SYMBOL(memscan); */ char *strstr(const char *s1, const char *s2) { - int l1, l2; + size_t l1, l2; l2 = strlen(s2); if (!l2) @@ -684,6 +684,31 @@ char *strstr(const char *s1, const char *s2) EXPORT_SYMBOL(strstr); #endif +#ifndef __HAVE_ARCH_STRNSTR +/** + * strnstr - Find the first substring in a length-limited string + * @s1: The string to be searched + * @s2: The string to search for + * @len: the maximum number of characters to search + */ +char *strnstr(const char *s1, const char *s2, size_t len) +{ + size_t l1 = len, l2; + + l2 = strlen(s2); + if (!l2) + return (char *)s1; + while (l1 >= l2) { + l1--; + if (!memcmp(s1, s2, l2)) + return (char *)s1; + s1++; + } + return NULL; +} +EXPORT_SYMBOL(strnstr); +#endif + #ifndef __HAVE_ARCH_MEMCHR /** * memchr - Find a character in an area of memory. From b2af211f284eb1bef19fbb85fc8ef551bb1e7460 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 14 Jan 2010 10:54:11 +0800 Subject: [PATCH 0905/1626] tracing/filters: Fix MATCH_MIDDLE_ONLY filter matching The @str might not be NULL-terminated if it's of type DYN_STRING or STATIC_STRING, so we should use strnstr() instead of strstr(). Signed-off-by: Li Zefan LKML-Reference: <4B4E8753.2000102@cn.fujitsu.com> Acked-by: Frederic Weisbecker Signed-off-by: Steven Rostedt --- kernel/trace/trace_events_filter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c index 49e44dd17851..f364b085397e 100644 --- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -268,7 +268,7 @@ static int regex_match_front(char *str, struct regex *r, int len) static int regex_match_middle(char *str, struct regex *r, int len) { - if (strstr(str, r->pattern)) + if (strnstr(str, r->pattern, len)) return 1; return 0; } From 16da27a8bc7a0d050686d1b2e9efb53fab9ed226 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 14 Jan 2010 10:54:27 +0800 Subject: [PATCH 0906/1626] tracing/filters: Fix MATCH_FULL filter matching for PTR_STRING MATCH_FULL matching for PTR_STRING is not working correctly: # echo 'func == vt' > events/bkl/lock_kernel/filter # echo 1 > events/bkl/lock_kernel/enable ... # cat trace Xorg-1484 [000] 1973.392586: lock_kernel: ... func=vt_ioctl() gpm-1402 [001] 1974.027740: lock_kernel: ... func=vt_ioctl() We should pass to regex.match(..., len) the length (including '\0') of the source string instead of the length of the pattern string. Signed-off-by: Li Zefan LKML-Reference: <4B4E8763.5070707@cn.fujitsu.com> Acked-by: Frederic Weisbecker Signed-off-by: Steven Rostedt --- kernel/trace/trace_events_filter.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c index f364b085397e..60c2a4efad4a 100644 --- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -211,8 +211,9 @@ static int filter_pred_pchar(struct filter_pred *pred, void *event, { char **addr = (char **)(event + pred->offset); int cmp, match; + int len = strlen(*addr) + 1; /* including tailing '\0' */ - cmp = pred->regex.match(*addr, &pred->regex, pred->regex.field_len); + cmp = pred->regex.match(*addr, &pred->regex, len); match = cmp ^ pred->not; @@ -782,10 +783,8 @@ static int filter_add_pred(struct filter_parse_state *ps, pred->regex.field_len = field->size; } else if (field->filter_type == FILTER_DYN_STRING) fn = filter_pred_strloc; - else { + else fn = filter_pred_pchar; - pred->regex.field_len = strlen(pred->regex.pattern); - } } else { if (field->is_signed) ret = strict_strtoll(pred->regex.pattern, 0, &val); From d1303dd1d6b220cab375f24fa91a5640e54e169e Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 14 Jan 2010 10:54:40 +0800 Subject: [PATCH 0907/1626] tracing/filters: Add comment for match callbacks We should be clear on 2 things: - the length parameter of a match callback includes tailing '\0'. - the string to be searched might not be NULL-terminated. Signed-off-by: Li Zefan LKML-Reference: <4B4E8770.7000608@cn.fujitsu.com> Signed-off-by: Steven Rostedt --- kernel/trace/trace_events_filter.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c index 60c2a4efad4a..e42af9aad69f 100644 --- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -252,7 +252,18 @@ static int filter_pred_none(struct filter_pred *pred, void *event, return 0; } -/* Basic regex callbacks */ +/* + * regex_match_foo - Basic regex callbacks + * + * @str: the string to be searched + * @r: the regex structure containing the pattern string + * @len: the length of the string to be searched (including '\0') + * + * Note: + * - @str might not be NULL-terminated if it's of type DYN_STRING + * or STATIC_STRING + */ + static int regex_match_full(char *str, struct regex *r, int len) { if (strncmp(str, r->pattern, len) == 0) From 1db913823c0f8360fccbd24ca67eb073966a5ffd Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 22 Jan 2010 17:06:20 -0500 Subject: [PATCH 0908/1626] ext4: Handle -EDQUOT error on write We need to release the journal before we do a write_inode. Otherwise we could deadlock. Signed-off-by: Aneesh Kumar K.V --- fs/ext4/inode.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index c818972c8302..60b3a19e9927 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1835,24 +1835,12 @@ repeat: * later. Real quota accounting is done at pages writeout * time. */ - if (vfs_dq_reserve_block(inode, md_needed + 1)) { - /* - * We tend to badly over-estimate the amount of - * metadata blocks which are needed, so if we have - * reserved any metadata blocks, try to force out the - * inode and see if we have any better luck. - */ - if (md_reserved && retries++ <= 3) - goto retry; + if (vfs_dq_reserve_block(inode, md_needed + 1)) return -EDQUOT; - } if (ext4_claim_free_blocks(sbi, md_needed + 1)) { vfs_dq_release_reservation_block(inode, md_needed + 1); if (ext4_should_retry_alloc(inode->i_sb, &retries)) { - retry: - if (md_reserved) - write_inode_now(inode, (retries == 3)); yield(); goto repeat; } @@ -3032,7 +3020,7 @@ static int ext4_da_write_begin(struct file *file, struct address_space *mapping, loff_t pos, unsigned len, unsigned flags, struct page **pagep, void **fsdata) { - int ret, retries = 0; + int ret, retries = 0, quota_retries = 0; struct page *page; pgoff_t index; unsigned from, to; @@ -3091,6 +3079,22 @@ retry: if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) goto retry; + + if ((ret == -EDQUOT) && + EXT4_I(inode)->i_reserved_meta_blocks && + (quota_retries++ < 3)) { + /* + * Since we often over-estimate the number of meta + * data blocks required, we may sometimes get a + * spurios out of quota error even though there would + * be enough space once we write the data blocks and + * find out how many meta data blocks were _really_ + * required. So try forcing the inode write to see if + * that helps. + */ + write_inode_now(inode, (quota_retries == 3)); + goto retry; + } out: return ret; } From 5f634d064c709ea02c3cdaa850a08323a4a4bf28 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Mon, 25 Jan 2010 04:00:31 -0500 Subject: [PATCH 0909/1626] ext4: Fix quota accounting error with fallocate When we fallocate a region of the file which we had recently written, and which is still in the page cache marked as delayed allocated blocks we need to make sure we don't do the quota update on writepage path. This is because the needed quota updated would have already be done by fallocate. Signed-off-by: Aneesh Kumar K.V --- fs/ext4/ext4.h | 2 ++ fs/ext4/extents.c | 21 +++++++++++++++++++++ fs/ext4/inode.c | 44 +++++++++++++++++++++++++++++++------------- 3 files changed, 54 insertions(+), 13 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index af7b62699ea9..b98de17e542a 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1443,6 +1443,8 @@ extern int ext4_block_truncate_page(handle_t *handle, extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf); extern qsize_t *ext4_get_reserved_space(struct inode *inode); extern int flush_aio_dio_completed_IO(struct inode *inode); +extern void ext4_da_update_reserve_space(struct inode *inode, + int used, int quota_claim); /* ioctl.c */ extern long ext4_ioctl(struct file *, unsigned int, unsigned long); extern long ext4_compat_ioctl(struct file *, unsigned int, unsigned long); diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 7d7b74e94687..3b6ff72026f0 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3132,7 +3132,19 @@ out: unmap_underlying_metadata_blocks(inode->i_sb->s_bdev, newblock + max_blocks, allocated - max_blocks); + allocated = max_blocks; } + + /* + * If we have done fallocate with the offset that is already + * delayed allocated, we would have block reservation + * and quota reservation done in the delayed write path. + * But fallocate would have already updated quota and block + * count for this offset. So cancel these reservation + */ + if (flags & EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE) + ext4_da_update_reserve_space(inode, allocated, 0); + map_out: set_buffer_mapped(bh_result); out1: @@ -3368,8 +3380,17 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode, /* previous routine could use block we allocated */ newblock = ext_pblock(&newex); allocated = ext4_ext_get_actual_len(&newex); + if (allocated > max_blocks) + allocated = max_blocks; set_buffer_new(bh_result); + /* + * Update reserved blocks/metadata blocks after successful + * block allocation which had been deferred till now. + */ + if (flags & EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE) + ext4_da_update_reserve_space(inode, allocated, 1); + /* * Cache the extent and update transaction to commit on fdatasync only * when it is _not_ an uninitialized extent. diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 60b3a19e9927..c955f6490b78 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1053,11 +1053,12 @@ static int ext4_calc_metadata_amount(struct inode *inode, sector_t lblock) * Called with i_data_sem down, which is important since we can call * ext4_discard_preallocations() from here. */ -static void ext4_da_update_reserve_space(struct inode *inode, int used) +void ext4_da_update_reserve_space(struct inode *inode, + int used, int quota_claim) { struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); struct ext4_inode_info *ei = EXT4_I(inode); - int mdb_free = 0; + int mdb_free = 0, allocated_meta_blocks = 0; spin_lock(&ei->i_block_reservation_lock); if (unlikely(used > ei->i_reserved_data_blocks)) { @@ -1073,6 +1074,7 @@ static void ext4_da_update_reserve_space(struct inode *inode, int used) ei->i_reserved_data_blocks -= used; used += ei->i_allocated_meta_blocks; ei->i_reserved_meta_blocks -= ei->i_allocated_meta_blocks; + allocated_meta_blocks = ei->i_allocated_meta_blocks; ei->i_allocated_meta_blocks = 0; percpu_counter_sub(&sbi->s_dirtyblocks_counter, used); @@ -1090,9 +1092,23 @@ static void ext4_da_update_reserve_space(struct inode *inode, int used) spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); /* Update quota subsystem */ - vfs_dq_claim_block(inode, used); - if (mdb_free) - vfs_dq_release_reservation_block(inode, mdb_free); + if (quota_claim) { + vfs_dq_claim_block(inode, used); + if (mdb_free) + vfs_dq_release_reservation_block(inode, mdb_free); + } else { + /* + * We did fallocate with an offset that is already delayed + * allocated. So on delayed allocated writeback we should + * not update the quota for allocated blocks. But then + * converting an fallocate region to initialized region would + * have caused a metadata allocation. So claim quota for + * that + */ + if (allocated_meta_blocks) + vfs_dq_claim_block(inode, allocated_meta_blocks); + vfs_dq_release_reservation_block(inode, mdb_free + used); + } /* * If we have done all the pending block allocations and if @@ -1292,18 +1308,20 @@ int ext4_get_blocks(handle_t *handle, struct inode *inode, sector_t block, */ EXT4_I(inode)->i_state &= ~EXT4_STATE_EXT_MIGRATE; } - } + /* + * Update reserved blocks/metadata blocks after successful + * block allocation which had been deferred till now. We don't + * support fallocate for non extent files. So we can update + * reserve space here. + */ + if ((retval > 0) && + (flags & EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE)) + ext4_da_update_reserve_space(inode, retval, 1); + } if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) EXT4_I(inode)->i_delalloc_reserved_flag = 0; - /* - * Update reserved blocks/metadata blocks after successful - * block allocation which had been deferred till now. - */ - if ((retval > 0) && (flags & EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE)) - ext4_da_update_reserve_space(inode, retval); - up_write((&EXT4_I(inode)->i_data_sem)); if (retval > 0 && buffer_mapped(bh)) { int ret = check_block_validity(inode, "file system " From 1296cc85c26e94eb865d03f82140f27d598de467 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 15 Jan 2010 01:27:59 -0500 Subject: [PATCH 0910/1626] ext4: Drop EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE flag We should update reserve space if it is delalloc buffer and that is indicated by EXT4_GET_BLOCKS_DELALLOC_RESERVE flag. So use EXT4_GET_BLOCKS_DELALLOC_RESERVE in place of EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE Signed-off-by: Aneesh Kumar K.V --- fs/ext4/ext4.h | 7 ++----- fs/ext4/extents.c | 4 ++-- fs/ext4/inode.c | 8 ++++---- 3 files changed, 8 insertions(+), 11 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index b98de17e542a..874d169a193e 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -361,14 +361,11 @@ struct ext4_new_group_data { so set the magic i_delalloc_reserve_flag after taking the inode allocation semaphore for */ #define EXT4_GET_BLOCKS_DELALLOC_RESERVE 0x0004 - /* Call ext4_da_update_reserve_space() after successfully - allocating the blocks */ -#define EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE 0x0008 /* caller is from the direct IO path, request to creation of an unitialized extents if not allocated, split the uninitialized extent if blocks has been preallocated already*/ -#define EXT4_GET_BLOCKS_DIO 0x0010 -#define EXT4_GET_BLOCKS_CONVERT 0x0020 +#define EXT4_GET_BLOCKS_DIO 0x0008 +#define EXT4_GET_BLOCKS_CONVERT 0x0010 #define EXT4_GET_BLOCKS_DIO_CREATE_EXT (EXT4_GET_BLOCKS_DIO|\ EXT4_GET_BLOCKS_CREATE_UNINIT_EXT) /* Convert extent to initialized after direct IO complete */ diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 3b6ff72026f0..765a4826b118 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3142,7 +3142,7 @@ out: * But fallocate would have already updated quota and block * count for this offset. So cancel these reservation */ - if (flags & EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE) + if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) ext4_da_update_reserve_space(inode, allocated, 0); map_out: @@ -3388,7 +3388,7 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode, * Update reserved blocks/metadata blocks after successful * block allocation which had been deferred till now. */ - if (flags & EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE) + if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) ext4_da_update_reserve_space(inode, allocated, 1); /* diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index c955f6490b78..e11952404e02 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1316,7 +1316,7 @@ int ext4_get_blocks(handle_t *handle, struct inode *inode, sector_t block, * reserve space here. */ if ((retval > 0) && - (flags & EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE)) + (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)) ext4_da_update_reserve_space(inode, retval, 1); } if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) @@ -2219,10 +2219,10 @@ static int mpage_da_map_blocks(struct mpage_da_data *mpd) * variables are updated after the blocks have been allocated. */ new.b_state = 0; - get_blocks_flags = (EXT4_GET_BLOCKS_CREATE | - EXT4_GET_BLOCKS_DELALLOC_RESERVE); + get_blocks_flags = EXT4_GET_BLOCKS_CREATE; if (mpd->b_state & (1 << BH_Delay)) - get_blocks_flags |= EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE; + get_blocks_flags |= EXT4_GET_BLOCKS_DELALLOC_RESERVE; + blks = ext4_get_blocks(handle, mpd->inode, next, max_blocks, &new, get_blocks_flags); if (blks < 0) { From 0a3727ffb99f09481da6110ac0067550129a768d Mon Sep 17 00:00:00 2001 From: Uri Yosef Date: Fri, 15 Jan 2010 16:56:05 +0900 Subject: [PATCH 0911/1626] ARM: MINI2440: Fix crash on boot due to improper __initdata qualifier This patch fix mini2440 crash on boot due to improper __initdata qualifier on mini2440_led1_pdata. Signed-off-by: Uri Yosef Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2440/mach-mini2440.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 547d4fc99131..f457a4a2da72 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -399,35 +399,35 @@ static struct platform_device mini2440_button_device __initdata = { /* LEDS */ -static struct s3c24xx_led_platdata mini2440_led1_pdata __initdata = { +static struct s3c24xx_led_platdata mini2440_led1_pdata = { .name = "led1", .gpio = S3C2410_GPB(5), .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .def_trigger = "heartbeat", }; -static struct s3c24xx_led_platdata mini2440_led2_pdata __initdata = { +static struct s3c24xx_led_platdata mini2440_led2_pdata = { .name = "led2", .gpio = S3C2410_GPB(6), .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .def_trigger = "nand-disk", }; -static struct s3c24xx_led_platdata mini2440_led3_pdata __initdata = { +static struct s3c24xx_led_platdata mini2440_led3_pdata = { .name = "led3", .gpio = S3C2410_GPB(7), .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .def_trigger = "mmc0", }; -static struct s3c24xx_led_platdata mini2440_led4_pdata __initdata = { +static struct s3c24xx_led_platdata mini2440_led4_pdata = { .name = "led4", .gpio = S3C2410_GPB(8), .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .def_trigger = "", }; -static struct s3c24xx_led_platdata mini2440_led_backlight_pdata __initdata = { +static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = { .name = "backlight", .gpio = S3C2410_GPG(4), .def_trigger = "backlight", From 3ce2f76f5dfeeacd128db9e5cd6945bac0ea0b2a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 15 Jan 2010 17:04:42 +0900 Subject: [PATCH 0912/1626] ARM: MINI2440: Fixup __initdata usage Remove some of the __initdata tags which are currently inappropriate for platform_device and some of the platform data. These can be returned once support for copying platform devices and data is added. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2440/mach-mini2440.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index f457a4a2da72..2068e9096a43 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -288,7 +288,7 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = { /* DM9000AEP 10/100 ethernet controller */ -static struct resource mini2440_dm9k_resource[] __initdata = { +static struct resource mini2440_dm9k_resource[] = { [0] = { .start = MACH_MINI2440_DM9K_BASE, .end = MACH_MINI2440_DM9K_BASE + 3, @@ -310,11 +310,11 @@ static struct resource mini2440_dm9k_resource[] __initdata = { * The DM9000 has no eeprom, and it's MAC address is set by * the bootloader before starting the kernel. */ -static struct dm9000_plat_data mini2440_dm9k_pdata __initdata = { +static struct dm9000_plat_data mini2440_dm9k_pdata = { .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM), }; -static struct platform_device mini2440_device_eth __initdata = { +static struct platform_device mini2440_device_eth = { .name = "dm9000", .id = -1, .num_resources = ARRAY_SIZE(mini2440_dm9k_resource), @@ -341,7 +341,7 @@ static struct platform_device mini2440_device_eth __initdata = { * | | +----+ +----+ * ..... */ -static struct gpio_keys_button mini2440_buttons[] __initdata = { +static struct gpio_keys_button mini2440_buttons[] = { { .gpio = S3C2410_GPG(0), /* K1 */ .code = KEY_F1, @@ -384,12 +384,12 @@ static struct gpio_keys_button mini2440_buttons[] __initdata = { #endif }; -static struct gpio_keys_platform_data mini2440_button_data __initdata = { +static struct gpio_keys_platform_data mini2440_button_data = { .buttons = mini2440_buttons, .nbuttons = ARRAY_SIZE(mini2440_buttons), }; -static struct platform_device mini2440_button_device __initdata = { +static struct platform_device mini2440_button_device = { .name = "gpio-keys", .id = -1, .dev = { @@ -433,7 +433,7 @@ static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = { .def_trigger = "backlight", }; -static struct platform_device mini2440_led1 __initdata = { +static struct platform_device mini2440_led1 = { .name = "s3c24xx_led", .id = 1, .dev = { @@ -441,7 +441,7 @@ static struct platform_device mini2440_led1 __initdata = { }, }; -static struct platform_device mini2440_led2 __initdata = { +static struct platform_device mini2440_led2 = { .name = "s3c24xx_led", .id = 2, .dev = { @@ -449,7 +449,7 @@ static struct platform_device mini2440_led2 __initdata = { }, }; -static struct platform_device mini2440_led3 __initdata = { +static struct platform_device mini2440_led3 = { .name = "s3c24xx_led", .id = 3, .dev = { @@ -457,7 +457,7 @@ static struct platform_device mini2440_led3 __initdata = { }, }; -static struct platform_device mini2440_led4 __initdata = { +static struct platform_device mini2440_led4 = { .name = "s3c24xx_led", .id = 4, .dev = { @@ -465,7 +465,7 @@ static struct platform_device mini2440_led4 __initdata = { }, }; -static struct platform_device mini2440_led_backlight __initdata = { +static struct platform_device mini2440_led_backlight = { .name = "s3c24xx_led", .id = 5, .dev = { @@ -475,14 +475,14 @@ static struct platform_device mini2440_led_backlight __initdata = { /* AUDIO */ -static struct s3c24xx_uda134x_platform_data mini2440_audio_pins __initdata = { +static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = { .l3_clk = S3C2410_GPB(4), .l3_mode = S3C2410_GPB(2), .l3_data = S3C2410_GPB(3), .model = UDA134X_UDA1341 }; -static struct platform_device mini2440_audio __initdata = { +static struct platform_device mini2440_audio = { .name = "s3c24xx_uda134x", .id = 0, .dev = { From 093171465235a8482fbf08a9a2e365247e1f7dd5 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 15 Jan 2010 01:27:49 -0800 Subject: [PATCH 0913/1626] sparc: leds_resource.end assigned to itself in clock_board_probe() It should be a 1 byte region. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- arch/sparc/kernel/central.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c index f3b5466c389c..4589ca33220f 100644 --- a/arch/sparc/kernel/central.c +++ b/arch/sparc/kernel/central.c @@ -99,7 +99,7 @@ static int __devinit clock_board_probe(struct of_device *op, p->leds_resource.start = (unsigned long) (p->clock_regs + CLOCK_CTRL); - p->leds_resource.end = p->leds_resource.end; + p->leds_resource.end = p->leds_resource.start; p->leds_resource.name = "leds"; p->leds_pdev.name = "sunfire-clockboard-leds"; @@ -194,7 +194,7 @@ static int __devinit fhc_probe(struct of_device *op, if (!p->central) { p->leds_resource.start = (unsigned long) (p->pregs + FHC_PREGS_CTRL); - p->leds_resource.end = p->leds_resource.end; + p->leds_resource.end = p->leds_resource.start; p->leds_resource.name = "leds"; p->leds_pdev.name = "sunfire-fhc-leds"; From 0299b1371d8f1b074c8284a19beb9094ada9405f Mon Sep 17 00:00:00 2001 From: John Stultz Date: Fri, 15 Jan 2010 01:34:28 -0800 Subject: [PATCH 0914/1626] sparc: convert to arch_gettimeoffset() This patch converts sparc (specifically sparc32) to use GENERIC_TIME via the arch_getoffset() infrastructure, reducing the amount of arch specific code we need to maintain. The sparc architecture is one of the last 3 arches that need to be converted. This patch applies on top of Linus' current -git tree I've taken my best swing at converting this, but I'm not 100% confident I got it right. My cross-compiler is now out of date (gcc4.2) so I wasn't able to check if it compiled. Any assistance from arch maintainers or testers to get this merged would be great. Signed-off-by: John Stultz Signed-off-by: David S. Miller --- arch/sparc/Kconfig | 5 +- arch/sparc/include/asm/timex_32.h | 1 + arch/sparc/kernel/pcic.c | 103 +++++--------------------- arch/sparc/kernel/time_32.c | 116 +++++++----------------------- 4 files changed, 46 insertions(+), 179 deletions(-) diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 108197ac0d56..4097f6a10860 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -64,8 +64,11 @@ config BITS default 64 if SPARC64 config GENERIC_TIME + def_bool y + +config ARCH_USES_GETTIMEOFFSET bool - default y if SPARC64 + default y if SPARC32 config GENERIC_CMOS_UPDATE bool diff --git a/arch/sparc/include/asm/timex_32.h b/arch/sparc/include/asm/timex_32.h index b6ccdb0d6f7d..a254750e4c03 100644 --- a/arch/sparc/include/asm/timex_32.h +++ b/arch/sparc/include/asm/timex_32.h @@ -12,4 +12,5 @@ typedef unsigned long cycles_t; #define get_cycles() (0) +extern u32 (*do_arch_gettimeoffset)(void); #endif diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index 85e7037429b9..4e2724ec2bb6 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -163,8 +164,6 @@ void __iomem *pcic_regs; volatile int pcic_speculative; volatile int pcic_trapped; -static void pci_do_gettimeofday(struct timeval *tv); -static int pci_do_settimeofday(struct timespec *tv); #define CONFIG_CMD(bus, device_fn, where) (0x80000000 | (((unsigned int)bus) << 16) | (((unsigned int)device_fn) << 8) | (where & ~3)) @@ -716,19 +715,27 @@ static irqreturn_t pcic_timer_handler (int irq, void *h) #define USECS_PER_JIFFY 10000 /* We have 100HZ "standard" timer for sparc */ #define TICK_TIMER_LIMIT ((100*1000000/4)/100) +u32 pci_gettimeoffset(void) +{ + /* + * We divide all by 100 + * to have microsecond resolution and to avoid overflow + */ + unsigned long count = + readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW; + count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100); + return count * 1000; +} + + void __init pci_time_init(void) { struct linux_pcic *pcic = &pcic0; unsigned long v; int timer_irq, irq; - /* A hack until do_gettimeofday prototype is moved to arch specific headers - and btfixupped. Patch do_gettimeofday with ba pci_do_gettimeofday; nop */ - ((unsigned int *)do_gettimeofday)[0] = - 0x10800000 | ((((unsigned long)pci_do_gettimeofday - - (unsigned long)do_gettimeofday) >> 2) & 0x003fffff); - ((unsigned int *)do_gettimeofday)[1] = 0x01000000; - BTFIXUPSET_CALL(bus_do_settimeofday, pci_do_settimeofday, BTFIXUPCALL_NORM); + do_arch_gettimeoffset = pci_gettimeoffset; + btfixup(); writel (TICK_TIMER_LIMIT, pcic->pcic_regs+PCI_SYS_LIMIT); @@ -746,84 +753,6 @@ void __init pci_time_init(void) local_irq_enable(); } -static inline unsigned long do_gettimeoffset(void) -{ - /* - * We divide all by 100 - * to have microsecond resolution and to avoid overflow - */ - unsigned long count = - readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW; - count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100); - return count; -} - -static void pci_do_gettimeofday(struct timeval *tv) -{ - unsigned long flags; - unsigned long seq; - unsigned long usec, sec; - unsigned long max_ntp_tick = tick_usec - tickadj; - - do { - seq = read_seqbegin_irqsave(&xtime_lock, flags); - usec = do_gettimeoffset(); - - /* - * If time_adjust is negative then NTP is slowing the clock - * so make sure not to go into next possible interval. - * Better to lose some accuracy than have time go backwards.. - */ - if (unlikely(time_adjust < 0)) - usec = min(usec, max_ntp_tick); - - sec = xtime.tv_sec; - usec += (xtime.tv_nsec / 1000); - } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - - while (usec >= 1000000) { - usec -= 1000000; - sec++; - } - - tv->tv_sec = sec; - tv->tv_usec = usec; -} - -static int pci_do_settimeofday(struct timespec *tv) -{ - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - /* - * This is revolting. We need to set "xtime" correctly. However, the - * value in this location is the value at the most recent update of - * wall time. Discover what correction gettimeofday() would have - * made, and then undo it! - */ - tv->tv_nsec -= 1000 * do_gettimeoffset(); - while (tv->tv_nsec < 0) { - tv->tv_nsec += NSEC_PER_SEC; - tv->tv_sec--; - } - - wall_to_monotonic.tv_sec += xtime.tv_sec - tv->tv_sec; - wall_to_monotonic.tv_nsec += xtime.tv_nsec - tv->tv_nsec; - - if (wall_to_monotonic.tv_nsec > NSEC_PER_SEC) { - wall_to_monotonic.tv_nsec -= NSEC_PER_SEC; - wall_to_monotonic.tv_sec++; - } - if (wall_to_monotonic.tv_nsec < 0) { - wall_to_monotonic.tv_nsec += NSEC_PER_SEC; - wall_to_monotonic.tv_sec--; - } - - xtime.tv_sec = tv->tv_sec; - xtime.tv_nsec = tv->tv_nsec; - ntp_clear(); - return 0; -} #if 0 static void watchdog_reset() { diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c index 5b2f595fe65b..0d4c09b15efc 100644 --- a/arch/sparc/kernel/time_32.c +++ b/arch/sparc/kernel/time_32.c @@ -35,6 +35,7 @@ #include #include +#include #include #include #include @@ -51,7 +52,6 @@ DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); static int set_rtc_mmss(unsigned long); -static int sbus_do_settimeofday(struct timespec *tv); unsigned long profile_pc(struct pt_regs *regs) { @@ -76,6 +76,8 @@ EXPORT_SYMBOL(profile_pc); __volatile__ unsigned int *master_l10_counter; +u32 (*do_arch_gettimeoffset)(void); + /* * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick @@ -196,17 +198,37 @@ static int __init clock_init(void) { return of_register_driver(&clock_driver, &of_platform_bus_type); } - /* Must be after subsys_initcall() so that busses are probed. Must * be before device_initcall() because things like the RTC driver * need to see the clock registers. */ fs_initcall(clock_init); + +u32 sbus_do_gettimeoffset(void) +{ + unsigned long val = *master_l10_counter; + unsigned long usec = (val >> 10) & 0x1fffff; + + /* Limit hit? */ + if (val & 0x80000000) + usec += 1000000 / HZ; + + return usec * 1000; +} + + +u32 arch_gettimeoffset(void) +{ + if (unlikely(!do_arch_gettimeoffset)) + return 0; + return do_arch_gettimeoffset(); +} + static void __init sbus_time_init(void) { + do_arch_gettimeoffset = sbus_do_gettimeoffset; - BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM); btfixup(); sparc_init_timers(timer_interrupt); @@ -224,94 +246,6 @@ void __init time_init(void) sbus_time_init(); } -static inline unsigned long do_gettimeoffset(void) -{ - unsigned long val = *master_l10_counter; - unsigned long usec = (val >> 10) & 0x1fffff; - - /* Limit hit? */ - if (val & 0x80000000) - usec += 1000000 / HZ; - - return usec; -} - -/* Ok, my cute asm atomicity trick doesn't work anymore. - * There are just too many variables that need to be protected - * now (both members of xtime, et al.) - */ -void do_gettimeofday(struct timeval *tv) -{ - unsigned long flags; - unsigned long seq; - unsigned long usec, sec; - unsigned long max_ntp_tick = tick_usec - tickadj; - - do { - seq = read_seqbegin_irqsave(&xtime_lock, flags); - usec = do_gettimeoffset(); - - /* - * If time_adjust is negative then NTP is slowing the clock - * so make sure not to go into next possible interval. - * Better to lose some accuracy than have time go backwards.. - */ - if (unlikely(time_adjust < 0)) - usec = min(usec, max_ntp_tick); - - sec = xtime.tv_sec; - usec += (xtime.tv_nsec / 1000); - } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - - while (usec >= 1000000) { - usec -= 1000000; - sec++; - } - - tv->tv_sec = sec; - tv->tv_usec = usec; -} - -EXPORT_SYMBOL(do_gettimeofday); - -int do_settimeofday(struct timespec *tv) -{ - int ret; - - write_seqlock_irq(&xtime_lock); - ret = bus_do_settimeofday(tv); - write_sequnlock_irq(&xtime_lock); - clock_was_set(); - return ret; -} - -EXPORT_SYMBOL(do_settimeofday); - -static int sbus_do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, sec = tv->tv_sec; - long wtm_nsec, nsec = tv->tv_nsec; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - /* - * This is revolting. We need to set "xtime" correctly. However, the - * value in this location is the value at the most recent update of - * wall time. Discover what correction gettimeofday() would have - * made, and then undo it! - */ - nsec -= 1000 * do_gettimeoffset(); - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); - - set_normalized_timespec(&xtime, sec, nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - ntp_clear(); - return 0; -} static int set_rtc_mmss(unsigned long secs) { From 38ff3e6bb987ec583268da8eb22628293095d43b Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Fri, 15 Jan 2010 01:40:55 -0800 Subject: [PATCH 0915/1626] dccp_probe: Fix module load dependencies between dccp and dccp_probe This was just recently reported to me. When built as modules, the dccp_probe module has a silent dependency on the dccp module. This stems from the fact that the module_init routine of dccp_probe registers a jprobe on the dccp_sendmsg symbol. Since the symbol is only referenced as a text string (the .symbol_name field in the jprobe struct) rather than the address of the symbol itself, depmod never picks this dependency up, and so if you load the dccp_probe module without the dccp module loaded, the register_jprobe call fails with an -EINVAL, and the whole module load fails. The fix is pretty easy, we can just wrap the register_jprobe call in a try_then_request_module call, which forces the dependency to get satisfied prior to the probe registration. Signed-off-by: Neil Horman Acked-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- net/dccp/probe.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/dccp/probe.c b/net/dccp/probe.c index dc328425fa20..6fcfe8745043 100644 --- a/net/dccp/probe.c +++ b/net/dccp/probe.c @@ -163,7 +163,8 @@ static __init int dccpprobe_init(void) if (!proc_net_fops_create(&init_net, procname, S_IRUSR, &dccpprobe_fops)) goto err0; - ret = register_jprobe(&dccp_send_probe); + ret = try_then_request_module((register_jprobe(&dccp_send_probe) == 0), + "dccp"); if (ret) goto err1; From 926311fd7dabcd284a1e8a87a3e2bb5f929c0c60 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 11 Jan 2010 20:58:21 +0100 Subject: [PATCH 0916/1626] amd64_edac: Ensure index stays within bounds in amd64_get_scrub_rate Add a missing iterator variable thus fixing the conditional of the for-loop in amd64_get_scrub_rate(). Signed-off-by: Roel Kluin Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index c5facd951dda..000dc67b85b7 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -197,7 +197,7 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw) edac_printk(KERN_DEBUG, EDAC_MC, "pci-read, sdram scrub control value: %d \n", scrubval); - for (i = 0; ARRAY_SIZE(scrubrates); i++) { + for (i = 0; i < ARRAY_SIZE(scrubrates); i++) { if (scrubrates[i].scrubval == scrubval) { *bw = scrubrates[i].bandwidth; status = 0; From 9fe3b691282691a46abbb25a1e0a8e5f96486d18 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 15 Jan 2010 01:47:37 -0800 Subject: [PATCH 0917/1626] MAINTAINERS: transfer maintainership of I/OAT Dan Williams takes over I/OAT from Maciej Sosnowski Signed-off-by: Dan Williams Signed-off-by: Maciej Sosnowski Signed-off-by: David S. Miller --- MAINTAINERS | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 256139e0c231..ef40d2c3e55b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -975,7 +975,6 @@ F: drivers/platform/x86/asus-laptop.c ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API M: Dan Williams -M: Maciej Sosnowski W: http://sourceforge.net/projects/xscaleiop S: Supported F: Documentation/crypto/async-tx-api.txt @@ -1804,7 +1803,6 @@ S: Supported F: fs/dlm/ DMA GENERIC OFFLOAD ENGINE SUBSYSTEM -M: Maciej Sosnowski M: Dan Williams S: Supported F: drivers/dma/ @@ -2767,7 +2765,7 @@ F: arch/x86/kernel/microcode_core.c F: arch/x86/kernel/microcode_intel.c INTEL I/OAT DMA DRIVER -M: Maciej Sosnowski +M: Dan Williams S: Supported F: drivers/dma/ioat* From 2a04cd4c7d41c4549764734dcf5a883d304e3229 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 15 Jan 2010 01:49:28 -0800 Subject: [PATCH 0918/1626] appletalk:: da.s_net not copied but assigned to itself in aarp_rcv() da.s_net was not copied but assigned to itself. Signed-off-by: Roel Kluin Acked-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- net/appletalk/aarp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/appletalk/aarp.c b/net/appletalk/aarp.c index 9d4adfd22757..f2b3b56aa779 100644 --- a/net/appletalk/aarp.c +++ b/net/appletalk/aarp.c @@ -819,7 +819,7 @@ static int aarp_rcv(struct sk_buff *skb, struct net_device *dev, ma = &ifa->address; else { /* We need to make a copy of the entry. */ da.s_node = sa.s_node; - da.s_net = da.s_net; + da.s_net = sa.s_net; ma = &da; } From d38cce7046cfd0011f69d5dcf6a22525438154f6 Mon Sep 17 00:00:00 2001 From: Kunal Gangakhedkar Date: Fri, 15 Jan 2010 21:01:47 +0530 Subject: [PATCH 0919/1626] ALSA: hda - Fix mute led GPIO on HP dv-series notebooks On my laptop (HP dv6-1110ax), there are no OEM strings in SMBIOS of type "HP_Mute_LED*". Hence, the GPIO for the mute button LED doesn't get set properly. I didn't find the strings in my cousin's laptop (HP dv9500t CTO) either. As per the documentation of find_mute_led_gpio(), these strings occur in HP B-series systems - so, before scanning the SMBIOS strings, we need to check if we're dealing with a B-series system. Need to get confirmation from HP if this logic takes care of all the systems. I'm trying to poke a friend there. Signed-off-by: Kunal Gangakhedkar Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 61 +++++++++++++++++++++++++--------- 1 file changed, 45 insertions(+), 16 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 2291a8396817..799ba2570902 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4730,6 +4730,26 @@ static void stac92xx_unsol_event(struct hda_codec *codec, unsigned int res) } } +static int hp_blike_system(u32 subsystem_id); + +static void set_hp_led_gpio(struct hda_codec *codec) +{ + struct sigmatel_spec *spec = codec->spec; + switch (codec->vendor_id) { + case 0x111d7608: + /* GPIO 0 */ + spec->gpio_led = 0x01; + break; + case 0x111d7600: + case 0x111d7601: + case 0x111d7602: + case 0x111d7603: + /* GPIO 3 */ + spec->gpio_led = 0x08; + break; + } +} + /* * This method searches for the mute LED GPIO configuration * provided as OEM string in SMBIOS. The format of that string @@ -4741,6 +4761,14 @@ static void stac92xx_unsol_event(struct hda_codec *codec, unsigned int res) * * So, HP B-series like systems may have HP_Mute_LED_0 (current models) * or HP_Mute_LED_0_3 (future models) OEM SMBIOS strings + * + * + * The dv-series laptops don't seem to have the HP_Mute_LED* strings in + * SMBIOS - at least the ones I have seen do not have them - which include + * my own system (HP Pavilion dv6-1110ax) and my cousin's + * HP Pavilion dv9500t CTO. + * Need more information on whether it is true across the entire series. + * -- kunal */ static int find_mute_led_gpio(struct hda_codec *codec) { @@ -4751,28 +4779,27 @@ static int find_mute_led_gpio(struct hda_codec *codec) while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { if (sscanf(dev->name, "HP_Mute_LED_%d_%d", - &spec->gpio_led_polarity, - &spec->gpio_led) == 2) { + &spec->gpio_led_polarity, + &spec->gpio_led) == 2) { spec->gpio_led = 1 << spec->gpio_led; return 1; } if (sscanf(dev->name, "HP_Mute_LED_%d", - &spec->gpio_led_polarity) == 1) { - switch (codec->vendor_id) { - case 0x111d7608: - /* GPIO 0 */ - spec->gpio_led = 0x01; - return 1; - case 0x111d7600: - case 0x111d7601: - case 0x111d7602: - case 0x111d7603: - /* GPIO 3 */ - spec->gpio_led = 0x08; - return 1; - } + &spec->gpio_led_polarity) == 1) { + set_hp_led_gpio(codec); + return 1; } } + + /* + * Fallback case - if we don't find the DMI strings, + * we statically set the GPIO - if not a B-series system. + */ + if (!hp_blike_system(codec->subsystem_id)) { + set_hp_led_gpio(codec); + spec->gpio_led_polarity = 1; + return 1; + } } return 0; } @@ -5548,6 +5575,8 @@ again: spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids); spec->num_smuxes = stac92hd71bxx_connected_smuxes(codec, 0x1e); + snd_printdd("Found board config: %d\n", spec->board_config); + switch (spec->board_config) { case STAC_HP_M4: /* enable internal microphone */ From 7a1110e861b2666ac09f5708d6fbe71d18ce64bb Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 12 Jan 2010 15:09:04 -0600 Subject: [PATCH 0920/1626] x86, uv: Add function retrieving node controller revision number Add function for determining the revision id of the SGI UV node controller chip (HUB). This function is needed in a subsequent patch. Signed-off-by: Jack Steiner LKML-Reference: <20100112210904.GA24546@sgi.com> Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/uv/uv_hub.h | 12 ++++++++++++ arch/x86/kernel/apic/x2apic_uv_x.c | 6 ++++++ 2 files changed, 18 insertions(+) diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index bc54fa965af3..40be813fefb1 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -495,5 +495,17 @@ static inline void uv_hub_send_ipi(int pnode, int apicid, int vector) uv_write_global_mmr64(pnode, UVH_IPI_INT, val); } +/* + * Get the minimum revision number of the hub chips within the partition. + * 1 - initial rev 1.0 silicon + * 2 - rev 2.0 production silicon + */ +static inline int uv_get_min_hub_revision_id(void) +{ + extern int uv_min_hub_revision_id; + + return uv_min_hub_revision_id; +} + #endif /* CONFIG_X86_64 */ #endif /* _ASM_X86_UV_UV_HUB_H */ diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index b8bb869a6618..0e48de9ff864 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -36,6 +36,8 @@ DEFINE_PER_CPU(int, x2apic_extra_bits); static enum uv_system_type uv_system_type; static u64 gru_start_paddr, gru_end_paddr; +int uv_min_hub_revision_id; +EXPORT_SYMBOL_GPL(uv_min_hub_revision_id); static inline bool is_GRU_range(u64 start, u64 end) { @@ -55,6 +57,10 @@ static int early_get_nodeid(void) mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr)); node_id.v = *mmr; early_iounmap(mmr, sizeof(*mmr)); + + /* Currently, all blades have same revision number */ + uv_min_hub_revision_id = node_id.s.revision; + return node_id.s.node_id; } From 1d2c867c941d635e53e8ad7bf37d060bb5b25ec5 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Fri, 15 Jan 2010 12:09:09 -0600 Subject: [PATCH 0921/1626] x86, uv: Ensure hub revision set for all ACPI modes. Ensure that UV hub revision is set for all ACPI modes. Signed-off-by: Russ Anderson LKML-Reference: <20100115180908.GB7757@sgi.com> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/apic/x2apic_uv_x.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 0e48de9ff864..21db3cbea7dc 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -66,7 +66,10 @@ static int early_get_nodeid(void) static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { + int nodeid; + if (!strcmp(oem_id, "SGI")) { + nodeid = early_get_nodeid(); x86_platform.is_untracked_pat_range = uv_is_untracked_pat_range; if (!strcmp(oem_table_id, "UVL")) uv_system_type = UV_LEGACY_APIC; @@ -74,7 +77,7 @@ static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) uv_system_type = UV_X2APIC; else if (!strcmp(oem_table_id, "UVH")) { __get_cpu_var(x2apic_extra_bits) = - early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1); + nodeid << (UV_APIC_PNODE_SHIFT - 1); uv_system_type = UV_NON_UNIQUE_APIC; return 1; } From c7c85101afd0cb8ce497456d12ee1cad4aad152f Mon Sep 17 00:00:00 2001 From: Zou Nan hai Date: Fri, 15 Jan 2010 10:29:06 +0800 Subject: [PATCH 0922/1626] drm/i915: remove loop in Ironlake interrupt handler On Ironlake, there is an interrupt master control bit. With the bit disabled before clearing IIR, we do not need to handle extra interrupt in a loop. This patch removes the loop in Ironlake interrupt handler. It fixed irq lost issue on some Ironlake platforms. Cc: Stable Team Signed-off-by: Zou Nan hai Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_irq.c | 74 ++++++++++++++------------------- 1 file changed, 32 insertions(+), 42 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 7cd8110051b6..89a071a3e6fb 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -274,7 +274,6 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int ret = IRQ_NONE; u32 de_iir, gt_iir, de_ier, pch_iir; - u32 new_de_iir, new_gt_iir, new_pch_iir; struct drm_i915_master_private *master_priv; /* disable master interrupt before clearing iir */ @@ -286,51 +285,42 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev) gt_iir = I915_READ(GTIIR); pch_iir = I915_READ(SDEIIR); - for (;;) { - if (de_iir == 0 && gt_iir == 0 && pch_iir == 0) - break; + if (de_iir == 0 && gt_iir == 0 && pch_iir == 0) + goto done; - ret = IRQ_HANDLED; + ret = IRQ_HANDLED; - /* should clear PCH hotplug event before clear CPU irq */ - I915_WRITE(SDEIIR, pch_iir); - new_pch_iir = I915_READ(SDEIIR); - - I915_WRITE(DEIIR, de_iir); - new_de_iir = I915_READ(DEIIR); - I915_WRITE(GTIIR, gt_iir); - new_gt_iir = I915_READ(GTIIR); - - if (dev->primary->master) { - master_priv = dev->primary->master->driver_priv; - if (master_priv->sarea_priv) - master_priv->sarea_priv->last_dispatch = - READ_BREADCRUMB(dev_priv); - } - - if (gt_iir & GT_USER_INTERRUPT) { - u32 seqno = i915_get_gem_seqno(dev); - dev_priv->mm.irq_gem_seqno = seqno; - trace_i915_gem_request_complete(dev, seqno); - DRM_WAKEUP(&dev_priv->irq_queue); - dev_priv->hangcheck_count = 0; - mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD); - } - - if (de_iir & DE_GSE) - ironlake_opregion_gse_intr(dev); - - /* check event from PCH */ - if ((de_iir & DE_PCH_EVENT) && - (pch_iir & SDE_HOTPLUG_MASK)) { - queue_work(dev_priv->wq, &dev_priv->hotplug_work); - } - - de_iir = new_de_iir; - gt_iir = new_gt_iir; - pch_iir = new_pch_iir; + if (dev->primary->master) { + master_priv = dev->primary->master->driver_priv; + if (master_priv->sarea_priv) + master_priv->sarea_priv->last_dispatch = + READ_BREADCRUMB(dev_priv); } + if (gt_iir & GT_USER_INTERRUPT) { + u32 seqno = i915_get_gem_seqno(dev); + dev_priv->mm.irq_gem_seqno = seqno; + trace_i915_gem_request_complete(dev, seqno); + DRM_WAKEUP(&dev_priv->irq_queue); + dev_priv->hangcheck_count = 0; + mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD); + } + + if (de_iir & DE_GSE) + ironlake_opregion_gse_intr(dev); + + /* check event from PCH */ + if ((de_iir & DE_PCH_EVENT) && + (pch_iir & SDE_HOTPLUG_MASK)) { + queue_work(dev_priv->wq, &dev_priv->hotplug_work); + } + + /* should clear PCH hotplug event before clear CPU irq */ + I915_WRITE(SDEIIR, pch_iir); + I915_WRITE(GTIIR, gt_iir); + I915_WRITE(DEIIR, de_iir); + +done: I915_WRITE(DEIER, de_ier); (void)I915_READ(DEIER); From c8e20be020f234c8d492927a424a7d8bbefd5b5d Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Sun, 10 Jan 2010 23:51:45 +0000 Subject: [PATCH 0923/1626] xfs: reclaim inodes under a write lock Make the inode tree reclaim walk exclusive to avoid races with concurrent sync walkers and lookups. This is a version of a patch posted by Christoph Hellwig that avoids all the code duplication. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Alex Elder --- fs/xfs/linux-2.6/xfs_sync.c | 154 +++++++++++++++------------------ fs/xfs/linux-2.6/xfs_sync.h | 2 +- fs/xfs/quota/xfs_qm_syscalls.c | 2 +- 3 files changed, 71 insertions(+), 87 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c index 6fed97a8cd3e..e19d25555c3f 100644 --- a/fs/xfs/linux-2.6/xfs_sync.c +++ b/fs/xfs/linux-2.6/xfs_sync.c @@ -65,7 +65,6 @@ xfs_inode_ag_lookup( * as the tree is sparse and a gang lookup walks to find * the number of objects requested. */ - read_lock(&pag->pag_ici_lock); if (tag == XFS_ICI_NO_TAG) { nr_found = radix_tree_gang_lookup(&pag->pag_ici_root, (void **)&ip, *first_index, 1); @@ -74,7 +73,7 @@ xfs_inode_ag_lookup( (void **)&ip, *first_index, 1, tag); } if (!nr_found) - goto unlock; + return NULL; /* * Update the index for the next lookup. Catch overflows @@ -84,13 +83,8 @@ xfs_inode_ag_lookup( */ *first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1); if (*first_index < XFS_INO_TO_AGINO(mp, ip->i_ino)) - goto unlock; - + return NULL; return ip; - -unlock: - read_unlock(&pag->pag_ici_lock); - return NULL; } STATIC int @@ -100,7 +94,8 @@ xfs_inode_ag_walk( int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags), int flags, - int tag) + int tag, + int exclusive) { struct xfs_perag *pag = &mp->m_perag[ag]; uint32_t first_index; @@ -114,10 +109,20 @@ restart: int error = 0; xfs_inode_t *ip; + if (exclusive) + write_lock(&pag->pag_ici_lock); + else + read_lock(&pag->pag_ici_lock); ip = xfs_inode_ag_lookup(mp, pag, &first_index, tag); - if (!ip) + if (!ip) { + if (exclusive) + write_unlock(&pag->pag_ici_lock); + else + read_unlock(&pag->pag_ici_lock); break; + } + /* execute releases pag->pag_ici_lock */ error = execute(ip, pag, flags); if (error == EAGAIN) { skipped++; @@ -125,9 +130,8 @@ restart: } if (error) last_error = error; - /* - * bail out if the filesystem is corrupted. - */ + + /* bail out if the filesystem is corrupted. */ if (error == EFSCORRUPTED) break; @@ -148,7 +152,8 @@ xfs_inode_ag_iterator( int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags), int flags, - int tag) + int tag, + int exclusive) { int error = 0; int last_error = 0; @@ -157,7 +162,8 @@ xfs_inode_ag_iterator( for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) { if (!mp->m_perag[ag].pag_ici_init) continue; - error = xfs_inode_ag_walk(mp, ag, execute, flags, tag); + error = xfs_inode_ag_walk(mp, ag, execute, flags, tag, + exclusive); if (error) { last_error = error; if (error == EFSCORRUPTED) @@ -181,11 +187,7 @@ xfs_sync_inode_valid( return EFSCORRUPTED; } - /* - * If we can't get a reference on the inode, it must be in reclaim. - * Leave it for the reclaim code to flush. Also avoid inodes that - * haven't been fully initialised. - */ + /* If we can't get a reference on the inode, it must be in reclaim. */ if (!igrab(inode)) { read_unlock(&pag->pag_ici_lock); return ENOENT; @@ -282,7 +284,7 @@ xfs_sync_data( ASSERT((flags & ~(SYNC_TRYLOCK|SYNC_WAIT)) == 0); error = xfs_inode_ag_iterator(mp, xfs_sync_inode_data, flags, - XFS_ICI_NO_TAG); + XFS_ICI_NO_TAG, 0); if (error) return XFS_ERROR(error); @@ -304,7 +306,7 @@ xfs_sync_attr( ASSERT((flags & ~SYNC_WAIT) == 0); return xfs_inode_ag_iterator(mp, xfs_sync_inode_attr, flags, - XFS_ICI_NO_TAG); + XFS_ICI_NO_TAG, 0); } STATIC int @@ -664,60 +666,6 @@ xfs_syncd_stop( kthread_stop(mp->m_sync_task); } -STATIC int -xfs_reclaim_inode( - xfs_inode_t *ip, - int sync_mode) -{ - xfs_perag_t *pag = xfs_get_perag(ip->i_mount, ip->i_ino); - - /* The hash lock here protects a thread in xfs_iget_core from - * racing with us on linking the inode back with a vnode. - * Once we have the XFS_IRECLAIM flag set it will not touch - * us. - */ - write_lock(&pag->pag_ici_lock); - spin_lock(&ip->i_flags_lock); - if (__xfs_iflags_test(ip, XFS_IRECLAIM) || - !__xfs_iflags_test(ip, XFS_IRECLAIMABLE)) { - spin_unlock(&ip->i_flags_lock); - write_unlock(&pag->pag_ici_lock); - return -EAGAIN; - } - __xfs_iflags_set(ip, XFS_IRECLAIM); - spin_unlock(&ip->i_flags_lock); - write_unlock(&pag->pag_ici_lock); - xfs_put_perag(ip->i_mount, pag); - - /* - * If the inode is still dirty, then flush it out. If the inode - * is not in the AIL, then it will be OK to flush it delwri as - * long as xfs_iflush() does not keep any references to the inode. - * We leave that decision up to xfs_iflush() since it has the - * knowledge of whether it's OK to simply do a delwri flush of - * the inode or whether we need to wait until the inode is - * pulled from the AIL. - * We get the flush lock regardless, though, just to make sure - * we don't free it while it is being flushed. - */ - xfs_ilock(ip, XFS_ILOCK_EXCL); - xfs_iflock(ip); - - /* - * In the case of a forced shutdown we rely on xfs_iflush() to - * wait for the inode to be unpinned before returning an error. - */ - if (!is_bad_inode(VFS_I(ip)) && xfs_iflush(ip, sync_mode) == 0) { - /* synchronize with xfs_iflush_done */ - xfs_iflock(ip); - xfs_ifunlock(ip); - } - - xfs_iunlock(ip, XFS_ILOCK_EXCL); - xfs_ireclaim(ip); - return 0; -} - void __xfs_inode_set_reclaim_tag( struct xfs_perag *pag, @@ -760,19 +708,55 @@ __xfs_inode_clear_reclaim_tag( } STATIC int -xfs_reclaim_inode_now( +xfs_reclaim_inode( struct xfs_inode *ip, struct xfs_perag *pag, - int flags) + int sync_mode) { - /* ignore if already under reclaim */ - if (xfs_iflags_test(ip, XFS_IRECLAIM)) { - read_unlock(&pag->pag_ici_lock); + /* + * The radix tree lock here protects a thread in xfs_iget from racing + * with us starting reclaim on the inode. Once we have the + * XFS_IRECLAIM flag set it will not touch us. + */ + spin_lock(&ip->i_flags_lock); + ASSERT_ALWAYS(__xfs_iflags_test(ip, XFS_IRECLAIMABLE)); + if (__xfs_iflags_test(ip, XFS_IRECLAIM)) { + /* ignore as it is already under reclaim */ + spin_unlock(&ip->i_flags_lock); + write_unlock(&pag->pag_ici_lock); return 0; } - read_unlock(&pag->pag_ici_lock); + __xfs_iflags_set(ip, XFS_IRECLAIM); + spin_unlock(&ip->i_flags_lock); + write_unlock(&pag->pag_ici_lock); - return xfs_reclaim_inode(ip, flags); + /* + * If the inode is still dirty, then flush it out. If the inode + * is not in the AIL, then it will be OK to flush it delwri as + * long as xfs_iflush() does not keep any references to the inode. + * We leave that decision up to xfs_iflush() since it has the + * knowledge of whether it's OK to simply do a delwri flush of + * the inode or whether we need to wait until the inode is + * pulled from the AIL. + * We get the flush lock regardless, though, just to make sure + * we don't free it while it is being flushed. + */ + xfs_ilock(ip, XFS_ILOCK_EXCL); + xfs_iflock(ip); + + /* + * In the case of a forced shutdown we rely on xfs_iflush() to + * wait for the inode to be unpinned before returning an error. + */ + if (!is_bad_inode(VFS_I(ip)) && xfs_iflush(ip, sync_mode) == 0) { + /* synchronize with xfs_iflush_done */ + xfs_iflock(ip); + xfs_ifunlock(ip); + } + + xfs_iunlock(ip, XFS_ILOCK_EXCL); + xfs_ireclaim(ip); + return 0; } int @@ -780,6 +764,6 @@ xfs_reclaim_inodes( xfs_mount_t *mp, int mode) { - return xfs_inode_ag_iterator(mp, xfs_reclaim_inode_now, mode, - XFS_ICI_RECLAIM_TAG); + return xfs_inode_ag_iterator(mp, xfs_reclaim_inode, mode, + XFS_ICI_RECLAIM_TAG, 1); } diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h index a500b4d91835..ea932b43335d 100644 --- a/fs/xfs/linux-2.6/xfs_sync.h +++ b/fs/xfs/linux-2.6/xfs_sync.h @@ -54,6 +54,6 @@ void __xfs_inode_clear_reclaim_tag(struct xfs_mount *mp, struct xfs_perag *pag, int xfs_sync_inode_valid(struct xfs_inode *ip, struct xfs_perag *pag); int xfs_inode_ag_iterator(struct xfs_mount *mp, int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags), - int flags, int tag); + int flags, int tag, int write_lock); #endif diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c index 71af76fe8a23..873e07e29074 100644 --- a/fs/xfs/quota/xfs_qm_syscalls.c +++ b/fs/xfs/quota/xfs_qm_syscalls.c @@ -891,7 +891,7 @@ xfs_qm_dqrele_all_inodes( uint flags) { ASSERT(mp->m_quotainfo); - xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, XFS_ICI_NO_TAG); + xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, XFS_ICI_NO_TAG, 0); } /*------------------------------------------------------------------------*/ From 018027be90a6946e8cf3f9b17b5582384f7ed117 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Sun, 10 Jan 2010 23:51:46 +0000 Subject: [PATCH 0924/1626] xfs: Avoid inodes in reclaim when flushing from inode cache The reclaim code will handle flushing of dirty inodes before reclaim occurs, so avoid them when determining whether an inode is a candidate for flushing to disk when walking the radix trees. This is based on a test patch from Christoph Hellwig. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Alex Elder --- fs/xfs/linux-2.6/xfs_sync.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c index e19d25555c3f..1f5e4bb5e970 100644 --- a/fs/xfs/linux-2.6/xfs_sync.c +++ b/fs/xfs/linux-2.6/xfs_sync.c @@ -180,26 +180,31 @@ xfs_sync_inode_valid( struct xfs_perag *pag) { struct inode *inode = VFS_I(ip); + int error = EFSCORRUPTED; /* nothing to sync during shutdown */ - if (XFS_FORCED_SHUTDOWN(ip->i_mount)) { - read_unlock(&pag->pag_ici_lock); - return EFSCORRUPTED; - } + if (XFS_FORCED_SHUTDOWN(ip->i_mount)) + goto out_unlock; - /* If we can't get a reference on the inode, it must be in reclaim. */ - if (!igrab(inode)) { - read_unlock(&pag->pag_ici_lock); - return ENOENT; - } - read_unlock(&pag->pag_ici_lock); + /* avoid new or reclaimable inodes. Leave for reclaim code to flush */ + error = ENOENT; + if (xfs_iflags_test(ip, XFS_INEW | XFS_IRECLAIMABLE | XFS_IRECLAIM)) + goto out_unlock; - if (is_bad_inode(inode) || xfs_iflags_test(ip, XFS_INEW)) { + /* If we can't grab the inode, it must on it's way to reclaim. */ + if (!igrab(inode)) + goto out_unlock; + + if (is_bad_inode(inode)) { IRELE(ip); - return ENOENT; + goto out_unlock; } - return 0; + /* inode is valid */ + error = 0; +out_unlock: + read_unlock(&pag->pag_ici_lock); + return error; } STATIC int From 57817c68229984818fea9e614d6f95249c3fb098 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Sun, 10 Jan 2010 23:51:47 +0000 Subject: [PATCH 0925/1626] xfs: reclaim all inodes by background tree walks We cannot do direct inode reclaim without taking the flush lock to ensure that we do not reclaim an inode under IO. We check the inode is clean before doing direct reclaim, but this is not good enough because the inode flush code marks the inode clean once it has copied the in-core dirty state to the backing buffer. It is the flush lock that determines whether the inode is still under IO, even though it is marked clean, and the inode is still required at IO completion so we can't reclaim it even though it is clean in core. Hence the requirement that we need to take the flush lock even on clean inodes because this guarantees that the inode writeback IO has completed and it is safe to reclaim the inode. With delayed write inode flushing, we coul dend up waiting a long time on the flush lock even for a clean inode. The background reclaim already handles this efficiently, so avoid all the problems by killing the direct reclaim path altogether. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Alex Elder --- fs/xfs/linux-2.6/xfs_super.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 09783cc444ac..77414db10dc2 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -954,16 +954,14 @@ xfs_fs_destroy_inode( ASSERT_ALWAYS(!xfs_iflags_test(ip, XFS_IRECLAIM)); /* - * If we have nothing to flush with this inode then complete the - * teardown now, otherwise delay the flush operation. + * We always use background reclaim here because even if the + * inode is clean, it still may be under IO and hence we have + * to take the flush lock. The background reclaim path handles + * this more efficiently than we can here, so simply let background + * reclaim tear down all inodes. */ - if (!xfs_inode_clean(ip)) { - xfs_inode_set_reclaim_tag(ip); - return; - } - out_reclaim: - xfs_ireclaim(ip); + xfs_inode_set_reclaim_tag(ip); } /* From 126976c7c17d3bdfbc1fe9e0af8bee9f62d14cc6 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Sun, 10 Jan 2010 23:51:48 +0000 Subject: [PATCH 0926/1626] xfs: Remove inode iolock held check during allocation lockdep complains about a the lock not being initialised as we do an ASSERT based check that the lock is not held before we initialise it to catch inodes freed with the lock held. lockdep does this check for us in the lock initialisation code, so remove the ASSERT to stop the lockdep warning. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Alex Elder --- fs/xfs/xfs_iget.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c index fa402a6bbbcf..155e798f30a1 100644 --- a/fs/xfs/xfs_iget.c +++ b/fs/xfs/xfs_iget.c @@ -73,7 +73,6 @@ xfs_inode_alloc( ASSERT(atomic_read(&ip->i_pincount) == 0); ASSERT(!spin_is_locked(&ip->i_flags_lock)); ASSERT(completion_done(&ip->i_flush)); - ASSERT(!rwsem_is_locked(&ip->i_iolock.mr_lock)); mrlock_init(&ip->i_iolock, MRLOCK_BARRIER, "xfsio", ip->i_ino); From 4b6a46882cca8349e8942e2650c33b11bc571c92 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 11 Jan 2010 11:45:21 +0000 Subject: [PATCH 0927/1626] xfs: fix stale inode flush avoidance When reclaiming stale inodes, we need to guarantee that inodes are unpinned before returning with a "clean" status. If we don't we can reclaim inodes that are pinned, leading to use after free in the transaction subsystem as transactions complete. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Alex Elder --- fs/xfs/xfs_inode.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 391d36b0e68c..ef77fd88c8e3 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -2842,13 +2842,9 @@ xfs_iflush( /* * If the inode isn't dirty, then just release the inode flush lock and - * do nothing. Treat stale inodes the same; we cannot rely on the - * backing buffer remaining stale in cache for the remaining life of - * the stale inode and so xfs_itobp() below may give us a buffer that - * no longer contains inodes below. Doing this stale check here also - * avoids forcing the log on pinned, stale inodes. + * do nothing. */ - if (xfs_inode_clean(ip) || xfs_iflags_test(ip, XFS_ISTALE)) { + if (xfs_inode_clean(ip)) { xfs_ifunlock(ip); return 0; } @@ -2871,6 +2867,19 @@ xfs_iflush( } xfs_iunpin_wait(ip); + /* + * For stale inodes we cannot rely on the backing buffer remaining + * stale in cache for the remaining life of the stale inode and so + * xfs_itobp() below may give us a buffer that no longer contains + * inodes below. We have to check this after ensuring the inode is + * unpinned so that it is safe to reclaim the stale inode after the + * flush call. + */ + if (xfs_iflags_test(ip, XFS_ISTALE)) { + xfs_ifunlock(ip); + return 0; + } + /* * This may have been unpinned because the filesystem is shutting * down forcibly. If that's the case we must not write this inode From 3daeb42c13567e1505f233f6a699cc0e23c8ab5a Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 14 Jan 2010 08:44:46 +0000 Subject: [PATCH 0928/1626] xfs: fix missing error check in xfs_rtfree_range When xfs_rtfind_forw() returns an error, the block is returned uninitialised. xfs_rtfree_range() is not checking the error return, so could be using an uninitialised block number for modifying bitmap summary info. The problem was found by gcc when compiling the *userspace* libxfs code - it is an copy of the kernel code with the exact same bug. gcc gives an uninitialised variable warning on the userspace code but not on the kernel code. You gotta love the consistency (Mmmm, slightly chewy today!). Signed-off-by: Dave Chinner Signed-off-by: Alex Elder --- fs/xfs/xfs_rtalloc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c index 9e15a1185362..6be05f756d59 100644 --- a/fs/xfs/xfs_rtalloc.c +++ b/fs/xfs/xfs_rtalloc.c @@ -1517,6 +1517,8 @@ xfs_rtfree_range( */ error = xfs_rtfind_forw(mp, tp, end, mp->m_sb.sb_rextents - 1, &postblock); + if (error) + return error; /* * If there are blocks not being freed at the front of the * old extent, add summary data for them to be allocated. From e09f98606dcc156de1146c209d45a0d6d5f51c3f Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 14 Jan 2010 01:33:54 +0000 Subject: [PATCH 0929/1626] xfs: xfs_swap_extents needs to handle dynamic fork offsets When swapping extents, we can corrupt inodes by swapping data forks that are in incompatible formats. This is caused by the two indoes having different fork offsets due to the presence of an attribute fork on an attr2 filesystem. xfs_fsr tries to be smart about setting the fork offset, but the trick it plays only works on attr1 (old fixed format attribute fork) filesystems. Changing the way xfs_fsr sets up the attribute fork will prevent this situation from ever occurring, so in the kernel code we can get by with a preventative fix - check that the data fork in the defragmented inode is in a format valid for the inode it is being swapped into. This will lead to files that will silently and potentially repeatedly fail defragmentation, so issue a warning to the log when this particular failure occurs to let us know that xfs_fsr needs updating/fixing. To help identify how to improve xfs_fsr to avoid this issue, add trace points for the inodes being swapped so that we can determine why the swap was rejected and to confirm that the code is making the right decisions and modifications when swapping forks. A further complication is even when the swap is allowed to proceed when the fork offset is different between the two inodes then value for the maximum number of extents the data fork can hold can be wrong. Make sure these are also set correctly after the swap occurs. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Alex Elder --- fs/xfs/xfs_dfrag.c | 106 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 90 insertions(+), 16 deletions(-) diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c index d1483a4f71b8..84ca1cf16a1e 100644 --- a/fs/xfs/xfs_dfrag.c +++ b/fs/xfs/xfs_dfrag.c @@ -114,10 +114,82 @@ xfs_swapext( return error; } +/* + * We need to check that the format of the data fork in the temporary inode is + * valid for the target inode before doing the swap. This is not a problem with + * attr1 because of the fixed fork offset, but attr2 has a dynamically sized + * data fork depending on the space the attribute fork is taking so we can get + * invalid formats on the target inode. + * + * E.g. target has space for 7 extents in extent format, temp inode only has + * space for 6. If we defragment down to 7 extents, then the tmp format is a + * btree, but when swapped it needs to be in extent format. Hence we can't just + * blindly swap data forks on attr2 filesystems. + * + * Note that we check the swap in both directions so that we don't end up with + * a corrupt temporary inode, either. + * + * Note that fixing the way xfs_fsr sets up the attribute fork in the source + * inode will prevent this situation from occurring, so all we do here is + * reject and log the attempt. basically we are putting the responsibility on + * userspace to get this right. + */ +static int +xfs_swap_extents_check_format( + xfs_inode_t *ip, /* target inode */ + xfs_inode_t *tip) /* tmp inode */ +{ + + /* Should never get a local format */ + if (ip->i_d.di_format == XFS_DINODE_FMT_LOCAL || + tip->i_d.di_format == XFS_DINODE_FMT_LOCAL) + return EINVAL; + + /* + * if the target inode has less extents that then temporary inode then + * why did userspace call us? + */ + if (ip->i_d.di_nextents < tip->i_d.di_nextents) + return EINVAL; + + /* + * if the target inode is in extent form and the temp inode is in btree + * form then we will end up with the target inode in the wrong format + * as we already know there are less extents in the temp inode. + */ + if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS && + tip->i_d.di_format == XFS_DINODE_FMT_BTREE) + return EINVAL; + + /* Check temp in extent form to max in target */ + if (tip->i_d.di_format == XFS_DINODE_FMT_EXTENTS && + XFS_IFORK_NEXTENTS(tip, XFS_DATA_FORK) > ip->i_df.if_ext_max) + return EINVAL; + + /* Check target in extent form to max in temp */ + if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS && + XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) > tip->i_df.if_ext_max) + return EINVAL; + + /* Check root block of temp in btree form to max in target */ + if (tip->i_d.di_format == XFS_DINODE_FMT_BTREE && + XFS_IFORK_BOFF(ip) && + tip->i_df.if_broot_bytes > XFS_IFORK_BOFF(ip)) + return EINVAL; + + /* Check root block of target in btree form to max in temp */ + if (ip->i_d.di_format == XFS_DINODE_FMT_BTREE && + XFS_IFORK_BOFF(tip) && + ip->i_df.if_broot_bytes > XFS_IFORK_BOFF(tip)) + return EINVAL; + + return 0; +} + int xfs_swap_extents( - xfs_inode_t *ip, - xfs_inode_t *tip, + xfs_inode_t *ip, /* target inode */ + xfs_inode_t *tip, /* tmp inode */ xfs_swapext_t *sxp) { xfs_mount_t *mp; @@ -161,13 +233,6 @@ xfs_swap_extents( goto out_unlock; } - /* Should never get a local format */ - if (ip->i_d.di_format == XFS_DINODE_FMT_LOCAL || - tip->i_d.di_format == XFS_DINODE_FMT_LOCAL) { - error = XFS_ERROR(EINVAL); - goto out_unlock; - } - if (VN_CACHED(VFS_I(tip)) != 0) { error = xfs_flushinval_pages(tip, 0, -1, FI_REMAPF_LOCKED); @@ -189,13 +254,12 @@ xfs_swap_extents( goto out_unlock; } - /* - * If the target has extended attributes, the tmp file - * must also in order to ensure the correct data fork - * format. - */ - if ( XFS_IFORK_Q(ip) != XFS_IFORK_Q(tip) ) { - error = XFS_ERROR(EINVAL); + /* check inode formats now that data is flushed */ + error = xfs_swap_extents_check_format(ip, tip); + if (error) { + xfs_fs_cmn_err(CE_NOTE, mp, + "%s: inode 0x%llx format is incompatible for exchanging.", + __FILE__, ip->i_ino); goto out_unlock; } @@ -275,6 +339,16 @@ xfs_swap_extents( *ifp = *tifp; /* struct copy */ *tifp = *tempifp; /* struct copy */ + /* + * Fix the in-memory data fork values that are dependent on the fork + * offset in the inode. We can't assume they remain the same as attr2 + * has dynamic fork offsets. + */ + ifp->if_ext_max = XFS_IFORK_SIZE(ip, XFS_DATA_FORK) / + (uint)sizeof(xfs_bmbt_rec_t); + tifp->if_ext_max = XFS_IFORK_SIZE(tip, XFS_DATA_FORK) / + (uint)sizeof(xfs_bmbt_rec_t); + /* * Fix the on-disk inode values */ From 6036ae7e9486352d5d1cbbee89186986e28e11fd Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Fri, 15 Jan 2010 13:04:48 -0800 Subject: [PATCH 0930/1626] drm/i915: Remove chatty execbuf failure message. Suggested-by: Chris Wilson > Acked-by: Jesse Barnes (in principle) Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 0f4afa3b03f2..0c67924ca80c 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4051,8 +4051,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, "back to user (%d)\n", args->buffer_count, ret); } - } else { - DRM_ERROR("i915_gem_do_execbuffer returns %d\n", ret); } drm_free_large(exec_list); From e5de30c9bf4a39db9f54c4a373470ce65881ade0 Mon Sep 17 00:00:00 2001 From: Benoit Papillault Date: Fri, 15 Jan 2010 12:21:37 +0100 Subject: [PATCH 0931/1626] mac80211: check that ieee80211_set_power_mgmt only handles STA interfaces. ieee80211_set_power_mgmt is meant for STA interfaces only. Moreover, since sdata->u.mgd.mtx is only initialized for STA interfaces, using this code for any other type of interface (like creating a monitor interface) will result in a oops. Cc: stable@kernel.org Signed-off-by: Benoit Papillault Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 6dc3579c0ac5..9ae1a4760b58 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1331,6 +1331,9 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct ieee80211_conf *conf = &local->hw.conf; + if (sdata->vif.type != NL80211_IFTYPE_STATION) + return -EOPNOTSUPP; + if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) return -EOPNOTSUPP; From 21bd770b9c90ee6a53a9dbb6293513a8c7654cfe Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 13 Jan 2010 14:10:50 +0000 Subject: [PATCH 0932/1626] drm/i915: Fix the incorrect cursor A bit definition in DSPFW2 register Signed-off-by: Zhao Yakui Reviewed-by: Eric Anholt Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 149d360d64a3..847006c5218e 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1815,7 +1815,7 @@ #define DSPFW_PLANEB_SHIFT 8 #define DSPFW2 0x70038 #define DSPFW_CURSORA_MASK 0x00003f00 -#define DSPFW_CURSORA_SHIFT 16 +#define DSPFW_CURSORA_SHIFT 8 #define DSPFW3 0x7003c #define DSPFW_HPLL_SR_EN (1<<31) #define DSPFW_CURSOR_SR_SHIFT 24 From 33814341f22f13cec17e8d7fbf6f7e8000e3efa4 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 14 Jan 2010 20:48:02 +0000 Subject: [PATCH 0933/1626] drm/i915: disable LVDS downclock by default Many platform support this feature, and it can provide significant power savings when the reduced refresh rate is low. However, on some platforms a secondary (reduced) timing is provided but not actually supported by the hardware. This results in undesirable flicker at runtime. So disable the feature by default, but allow users to opt-in to the reduced clock behavior with a new module parameter, lvds_downclock, that can be set to 1 to enable the feature. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.c | 3 +++ drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 3 ++- drivers/gpu/drm/i915/intel_lvds.c | 3 ++- 4 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 66f7bac2ee55..46d88965852a 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -45,6 +45,9 @@ module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400); unsigned int i915_powersave = 1; module_param_named(powersave, i915_powersave, int, 0400); +unsigned int i915_lvds_downclock = 0; +module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400); + static struct drm_driver driver; #define INTEL_VGA_DEVICE(id, info) { \ diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 445c49c6c397..5f781a74bf52 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -722,6 +722,7 @@ extern struct drm_ioctl_desc i915_ioctls[]; extern int i915_max_ioctl; extern unsigned int i915_fbpercrtc; extern unsigned int i915_powersave; +extern unsigned int i915_lvds_downclock; extern void i915_save_display(struct drm_device *dev); extern void i915_restore_display(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index f27567747580..b53c46f202f6 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -197,7 +197,8 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, memset(temp_mode, 0, sizeof(*temp_mode)); } kfree(temp_mode); - if (temp_downclock < panel_fixed_mode->clock) { + if (temp_downclock < panel_fixed_mode->clock && + i915_lvds_downclock) { dev_priv->lvds_downclock_avail = 1; dev_priv->lvds_downclock = temp_downclock; DRM_DEBUG_KMS("LVDS downclock is found in VBT. ", diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 5041590dfdc6..aa74e59bec61 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -926,7 +926,8 @@ static void intel_find_lvds_downclock(struct drm_device *dev, } } mutex_unlock(&dev->mode_config.mutex); - if (temp_downclock < panel_fixed_mode->clock) { + if (temp_downclock < panel_fixed_mode->clock && + i915_lvds_downclock) { /* We found the downclock for LVDS. */ dev_priv->lvds_downclock_avail = 1; dev_priv->lvds_downclock = temp_downclock; From 500a8cc466a24e2fbc4c86ef9c6467ae2ffdeb0c Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Wed, 13 Jan 2010 11:19:52 +0800 Subject: [PATCH 0934/1626] drm/i915: parse eDP panel color depth from VBT block Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 32 +++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_bios.h | 40 +++++++++++++++++++++++++++++++ 3 files changed, 73 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 5f781a74bf52..2c1669488b5a 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -283,6 +283,7 @@ typedef struct drm_i915_private { unsigned int lvds_use_ssc:1; unsigned int edp_support:1; int lvds_ssc_freq; + int edp_bpp; struct notifier_block lid_notifier; diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index b53c46f202f6..15fbc1b5a83e 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -33,6 +33,8 @@ #define SLAVE_ADDR1 0x70 #define SLAVE_ADDR2 0x72 +static int panel_type; + static void * find_section(struct bdb_header *bdb, int section_id) { @@ -128,6 +130,7 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, dev_priv->lvds_dither = lvds_options->pixel_dither; if (lvds_options->panel_type == 0xff) return; + panel_type = lvds_options->panel_type; lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA); if (!lvds_lfp_data) @@ -405,6 +408,34 @@ parse_driver_features(struct drm_i915_private *dev_priv, dev_priv->render_reclock_avail = true; } +static void +parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb) +{ + struct bdb_edp *edp; + + edp = find_section(bdb, BDB_EDP); + if (!edp) { + if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp_support) { + DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported,\ + assume 18bpp panel color depth.\n"); + dev_priv->edp_bpp = 18; + } + return; + } + + switch ((edp->color_depth >> (panel_type * 2)) & 3) { + case EDP_18BPP: + dev_priv->edp_bpp = 18; + break; + case EDP_24BPP: + dev_priv->edp_bpp = 24; + break; + case EDP_30BPP: + dev_priv->edp_bpp = 30; + break; + } +} + static void parse_device_mapping(struct drm_i915_private *dev_priv, struct bdb_header *bdb) @@ -522,6 +553,7 @@ intel_init_bios(struct drm_device *dev) parse_sdvo_device_mapping(dev_priv, bdb); parse_device_mapping(dev_priv, bdb); parse_driver_features(dev_priv, bdb); + parse_edp(dev_priv, bdb); pci_unmap_rom(pdev, bios); diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h index 425ac9d7f724..4c18514f6f80 100644 --- a/drivers/gpu/drm/i915/intel_bios.h +++ b/drivers/gpu/drm/i915/intel_bios.h @@ -98,6 +98,7 @@ struct vbios_data { #define BDB_SDVO_LVDS_PNP_IDS 24 #define BDB_SDVO_LVDS_POWER_SEQ 25 #define BDB_TV_OPTIONS 26 +#define BDB_EDP 27 #define BDB_LVDS_OPTIONS 40 #define BDB_LVDS_LFP_DATA_PTRS 41 #define BDB_LVDS_LFP_DATA 42 @@ -426,6 +427,45 @@ struct bdb_driver_features { u8 custom_vbt_version; } __attribute__((packed)); +#define EDP_18BPP 0 +#define EDP_24BPP 1 +#define EDP_30BPP 2 +#define EDP_RATE_1_62 0 +#define EDP_RATE_2_7 1 +#define EDP_LANE_1 0 +#define EDP_LANE_2 1 +#define EDP_LANE_4 3 +#define EDP_PREEMPHASIS_NONE 0 +#define EDP_PREEMPHASIS_3_5dB 1 +#define EDP_PREEMPHASIS_6dB 2 +#define EDP_PREEMPHASIS_9_5dB 3 +#define EDP_VSWING_0_4V 0 +#define EDP_VSWING_0_6V 1 +#define EDP_VSWING_0_8V 2 +#define EDP_VSWING_1_2V 3 + +struct edp_power_seq { + u16 t3; + u16 t7; + u16 t9; + u16 t10; + u16 t12; +} __attribute__ ((packed)); + +struct edp_link_params { + u8 rate:4; + u8 lanes:4; + u8 preemphasis:4; + u8 vswing:4; +} __attribute__ ((packed)); + +struct bdb_edp { + struct edp_power_seq power_seqs[16]; + u32 color_depth; + u32 sdrrs_msa_timing_delay; + struct edp_link_params link_params[16]; +} __attribute__ ((packed)); + bool intel_init_bios(struct drm_device *dev); /* From 885a5fb5b120a5c7e0b3baad7b0feb5a89f76c18 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Tue, 12 Jan 2010 05:38:31 +0800 Subject: [PATCH 0935/1626] drm/i915: fix pixel color depth setting on eDP Original DP mode_valid check didn't take pixel color depth into account, which made one 1600x900 eDP panel's mode check invalid because of overclock, but actually this 6bpc panel does can work with x1 lane at 2.7G. This one trys to take bpp value properly both in mode validation and mode setting. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 15 +++++++++++++++ drivers/gpu/drm/i915/intel_dp.c | 16 ++++++++++++---- 2 files changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 4b96a54b8e48..45da78ef4a92 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2924,6 +2924,21 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, temp |= PIPE_8BPC; else temp |= PIPE_6BPC; + } else if (is_edp) { + switch (dev_priv->edp_bpp/3) { + case 8: + temp |= PIPE_8BPC; + break; + case 10: + temp |= PIPE_10BPC; + break; + case 6: + temp |= PIPE_6BPC; + break; + case 12: + temp |= PIPE_12BPC; + break; + } } else temp |= PIPE_8BPC; I915_WRITE(pipeconf_reg, temp); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 0ec07e43d6cc..184b6780c440 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -125,9 +125,15 @@ intel_dp_link_clock(uint8_t link_bw) /* I think this is a fiction */ static int -intel_dp_link_required(int pixel_clock) +intel_dp_link_required(struct drm_device *dev, + struct intel_output *intel_output, int pixel_clock) { - return pixel_clock * 3; + struct drm_i915_private *dev_priv = dev->dev_private; + + if (IS_eDP(intel_output)) + return (pixel_clock * dev_priv->edp_bpp) / 8; + else + return pixel_clock * 3; } static int @@ -138,7 +144,8 @@ intel_dp_mode_valid(struct drm_connector *connector, int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output)); int max_lanes = intel_dp_max_lane_count(intel_output); - if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes) + if (intel_dp_link_required(connector->dev, intel_output, mode->clock) + > max_link_clock * max_lanes) return MODE_CLOCK_HIGH; if (mode->clock < 10000) @@ -492,7 +499,8 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, for (clock = 0; clock <= max_clock; clock++) { int link_avail = intel_dp_link_clock(bws[clock]) * lane_count; - if (intel_dp_link_required(mode->clock) <= link_avail) { + if (intel_dp_link_required(encoder->dev, intel_output, mode->clock) + <= link_avail) { dp_priv->link_bw = bws[clock]; dp_priv->lane_count = lane_count; adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw); From 6251ec0ae2eb9e9e96689422358c2fdb35c63768 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Tue, 12 Jan 2010 05:38:32 +0800 Subject: [PATCH 0936/1626] drm/i915: fix eDP pipe mask eDP could be on pipe A or B. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_dp.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 184b6780c440..439506cefc14 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1331,11 +1331,10 @@ intel_dp_init(struct drm_device *dev, int output_reg) else if (output_reg == DP_D || output_reg == PCH_DP_D) intel_output->clone_mask = (1 << INTEL_DP_D_CLONE_BIT); - if (IS_eDP(intel_output)) { - intel_output->crtc_mask = (1 << 1); + if (IS_eDP(intel_output)) intel_output->clone_mask = (1 << INTEL_EDP_CLONE_BIT); - } else - intel_output->crtc_mask = (1 << 0) | (1 << 1); + + intel_output->crtc_mask = (1 << 0) | (1 << 1); connector->interlace_allowed = true; connector->doublescan_allowed = 0; From 9e572cc9877ee6c43af60778f6b8d5ba0692d935 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Fri, 15 Jan 2010 12:12:24 -0500 Subject: [PATCH 0937/1626] inotify: do not reuse watch descriptors Since commit 7e790dd5fc937bc8d2400c30a05e32a9e9eef276 ("inotify: fix error paths in inotify_update_watch") inotify changed the manor in which it gave watch descriptors back to userspace. Previous to this commit inotify acted like the following: inotify_add_watch(X, Y, Z) = 1 inotify_rm_watch(X, 1); inotify_add_watch(X, Y, Z) = 2 but after this patch inotify would return watch descriptors like so: inotify_add_watch(X, Y, Z) = 1 inotify_rm_watch(X, 1); inotify_add_watch(X, Y, Z) = 1 which I saw as equivalent to opening an fd where open(file) = 1; close(1); open(file) = 1; seemed perfectly reasonable. The issue is that quite a bit of userspace apparently relies on the behavior in which watch descriptors will not be quickly reused. KDE relies on it, I know some selinux packages rely on it, and I have heard complaints from other random sources such as debian bug 558981. Although the man page implies what we do is ok, we broke userspace so this patch almost reverts us to the old behavior. It is still slightly racey and I have patches that would fix that, but they are rather large and this will fix it for all real world cases. The race is as follows: - task1 creates a watch and blocks in idr_new_watch() before it updates the hint. - task2 creates a watch and updates the hint. - task1 updates the hint with it's older wd - task removes the watch created by task2 - task adds a new watch and will reuse the wd originally given to task2 it requires moving some locking around the hint (last_wd) but this should solve it for the real world and be -stable safe. As a side effect this patch papers over a bug in the lib/idr code which is causing a large number WARN's to pop on people's system and many reports in kerneloops.org. I'm working on the root cause of that idr bug seperately but this should make inotify immune to that issue. Signed-off-by: Eric Paris Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/notify/inotify/inotify_user.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index 8271cf05c957..a94e8bd8eb1f 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -552,7 +552,7 @@ retry: spin_lock(&group->inotify_data.idr_lock); ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry, - group->inotify_data.last_wd, + group->inotify_data.last_wd+1, &tmp_ientry->wd); spin_unlock(&group->inotify_data.idr_lock); if (ret) { @@ -632,7 +632,7 @@ static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsign spin_lock_init(&group->inotify_data.idr_lock); idr_init(&group->inotify_data.idr); - group->inotify_data.last_wd = 1; + group->inotify_data.last_wd = 0; group->inotify_data.user = user; group->inotify_data.fa = NULL; From 976ae32be45a736acd49215a7e4771ff91f161c3 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Fri, 15 Jan 2010 12:12:25 -0500 Subject: [PATCH 0938/1626] inotify: only warn once for inotify problems inotify will WARN() if it finds that the idr and the fsnotify internals somehow got out of sync. It was only supposed to do this once but due to this stupid bug it would warn every single time a problem was detected. Signed-off-by: Eric Paris Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/notify/inotify/inotify_fsnotify.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c index c9ee67b442e1..1afb0a10229f 100644 --- a/fs/notify/inotify/inotify_fsnotify.c +++ b/fs/notify/inotify/inotify_fsnotify.c @@ -121,7 +121,7 @@ static int idr_callback(int id, void *p, void *data) if (warned) return 0; - warned = false; + warned = true; entry = p; ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry); From 9b974cc17166d31afed2638d56bdbf9829afbfaa Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Tue, 5 Jan 2010 11:25:06 +0800 Subject: [PATCH 0939/1626] drm/i915: enable 36bit physical address for hardware status page This enables possible 36bit address mask on 965G that use physical address for hw status page. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/char/agp/intel-agp.c | 6 +++++- drivers/gpu/drm/i915/i915_dma.c | 4 ++++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 30c36ac2cd00..3999a5f25f38 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -2460,10 +2460,14 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev, &bridge->mode); } - if (bridge->driver->mask_memory == intel_i965_mask_memory) + if (bridge->driver->mask_memory == intel_i965_mask_memory) { if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(36))) dev_err(&intel_private.pcidev->dev, "set gfx device dma mask 36bit failed!\n"); + else + pci_set_consistent_dma_mask(intel_private.pcidev, + DMA_BIT_MASK(36)); + } pci_set_drvdata(pdev, bridge); return agp_add_bridge(bridge); diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index bbe47812e4b6..e660ac07f3b2 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -134,6 +134,10 @@ static int i915_init_phys_hws(struct drm_device *dev) memset(dev_priv->hw_status_page, 0, PAGE_SIZE); + if (IS_I965G(dev)) + dev_priv->dma_status_page |= (dev_priv->dma_status_page >> 28) & + 0xf0; + I915_WRITE(HWS_PGA, dev_priv->dma_status_page); DRM_DEBUG_DRIVER("Enabled hardware status page\n"); return 0; From f5347867c5aea94c625246eaff8f7820b0a4cd8a Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 30 Dec 2009 15:53:03 +0300 Subject: [PATCH 0940/1626] ACPI: SBS: Move SBS HC callback to faster Notify queue SBS transactions should happen in Notify work queue, to not create a dead lock with GPE execution accessing SBS devices. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 3 ++- drivers/acpi/sbshc.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 9cc38857c33b..047330929821 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -535,7 +535,8 @@ static int acpi_ec_sync_query(struct acpi_ec *ec) return -ENOMEM; memcpy(copy, handler, sizeof(*copy)); pr_debug(PREFIX "push query execution (0x%2x) on queue\n", value); - return acpi_os_execute(OSL_GPE_HANDLER, + return acpi_os_execute((copy->func) ? + OSL_NOTIFY_HANDLER : OSL_GPE_HANDLER, acpi_ec_run, copy); } } diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c index d9339806df45..fd09229282ea 100644 --- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -242,7 +242,7 @@ static int smbus_alarm(void *context) case ACPI_SBS_CHARGER: case ACPI_SBS_MANAGER: case ACPI_SBS_BATTERY: - acpi_os_execute(OSL_GPE_HANDLER, + acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_smbus_callback, hc); default:; } From 54070101f86ca9a6e9ba243c999d144721ec3db7 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 30 Dec 2009 15:53:10 +0300 Subject: [PATCH 0941/1626] ACPI: EC: Add wait for irq storm Merge of poll and irq modes accelerated EC transaction, so that keyboard starts to suffer again. Add msleep(1) into transaction path for the storm to allow keyboard controller to do its job. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14747 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 047330929821..d6471bb6852f 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -259,7 +259,6 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); spin_unlock_irqrestore(&ec->curr_lock, tmp); ret = ec_poll(ec); - pr_debug(PREFIX "transaction end\n"); spin_lock_irqsave(&ec->curr_lock, tmp); ec->curr = NULL; spin_unlock_irqrestore(&ec->curr_lock, tmp); @@ -316,6 +315,7 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) /* check if we received SCI during transaction */ ec_check_sci_sync(ec, acpi_ec_read_status(ec)); if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + msleep(1); /* it is safe to enable GPE outside of transaction */ acpi_enable_gpe(NULL, ec->gpe); } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) { @@ -323,6 +323,7 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) "transactions will use polling mode\n"); set_bit(EC_FLAGS_GPE_STORM, &ec->flags); } + pr_debug(PREFIX "transaction end\n"); end: if (ec->global_lock) acpi_release_global_lock(glk); From 6a4e2b7503d1f630bface040cf0f5a7aac1fabdb Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Fri, 8 Jan 2010 21:29:58 +0800 Subject: [PATCH 0942/1626] ACPI: Advertise to BIOS in _OSC: _OST on _PPC changes If the BIOS pokes the system-wide OSC bits to see if Linux supports evaluating _OST after a _PPC change notification, answer yes. Also, fix an oversight where we neglected to set the OSC bit advertising processor aggregator device support when acpi-pad is compiled as a module. Signed-off-by: Zhao Yakui Signed-off-by: Len Brown --- drivers/acpi/bus.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index cf761b904e4a..a52126e46307 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -490,9 +490,14 @@ static void acpi_bus_osc_support(void) capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE; capbuf[OSC_SUPPORT_TYPE] = OSC_SB_PR3_SUPPORT; /* _PR3 is in use */ -#ifdef CONFIG_ACPI_PROCESSOR_AGGREGATOR +#if defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR) ||\ + defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR_MODULE) capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PAD_SUPPORT; #endif + +#if defined(CONFIG_ACPI_PROCESSOR) || defined(CONFIG_ACPI_PROCESSOR_MODULE) + capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PPC_OST_SUPPORT; +#endif if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))) return; if (ACPI_SUCCESS(acpi_run_osc(handle, &context))) From 070a24f4d238612bede515023893b18f494774c4 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 8 Jan 2010 11:12:41 -0700 Subject: [PATCH 0943/1626] ACPI: Remove unnecessary cast. The struct seq_file 'private' member is a void *, the cast is not needed. Also, remove an extra whitespace line. Signed-off-by: H Hartley Sweeten Signed-off-by: Len Brown --- drivers/acpi/processor_thermal.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index 140c5c5b423c..6deafb4aa0da 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -443,8 +443,7 @@ struct thermal_cooling_device_ops processor_cooling_ops = { #ifdef CONFIG_ACPI_PROCFS static int acpi_processor_limit_seq_show(struct seq_file *seq, void *offset) { - struct acpi_processor *pr = (struct acpi_processor *)seq->private; - + struct acpi_processor *pr = seq->private; if (!pr) goto end; From c084ca704a3661bf77690a05bc6bd2c305d87c34 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Thu, 10 Dec 2009 19:56:45 +0800 Subject: [PATCH 0944/1626] ACPI: don't cond_resched if irq is disabled commit 8bd108d adds preemption point after each opcode parse, then a sleeping function called from invalid context bug was founded during suspend/resume stage. this was fixed in commit abe1dfa by don't cond_resched when irq_disabled. But recent commit 138d156 changes the behaviour to don't cond_resched when in_atomic. This makes the sleeping function called from invalid context bug happen again, which is reported in http://lkml.org/lkml/2009/12/1/371. This patch also fixes http://bugzilla.kernel.org/show_bug.cgi?id=14483 Reported-and-bisected-by: Larry Finger Reported-and-bisected-by: Justin P. Mattock Signed-off-by: Xiaotian Feng Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/platform/aclinux.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h index 9d7febde10a1..09469971472f 100644 --- a/include/acpi/platform/aclinux.h +++ b/include/acpi/platform/aclinux.h @@ -152,7 +152,7 @@ static inline void *acpi_os_acquire_object(acpi_cache_t * cache) #include #define ACPI_PREEMPTION_POINT() \ do { \ - if (!in_atomic_preempt_off()) \ + if (!in_atomic_preempt_off() && !irqs_disabled()) \ cond_resched(); \ } while (0) From da8ba01deb98f3dc0558b1f5a37e64f40bba7904 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Wed, 6 Jan 2010 22:07:37 +0100 Subject: [PATCH 0945/1626] eeepc-laptop: disable cpu speed control on EeePC 701 The EeePC 4G ("701") implements CFVS, but it is not supported by the pre-installed OS, and the original option to change it in the BIOS setup screen was removed in later versions. Judging by the lack of "Super Hybrid Engine" on Asus product pages, this applies to all "701" models (4G/4G Surf/2G Surf). So Asus made a deliberate decision not to support it on this model. We have several reports that using it can cause the system to hang [1]. That said, it does not happen all the time. Some users do not experience it at all (and apparently wish to continue "right-clocking"). Check for the EeePC 701 using DMI. If met, then disable writes to the "cpufv" sysfs attribute and log an explanatory message. Add a "cpufv_disabled" attribute which allow users to override this policy. Writing to this attribute will log a second message. The sysfs attribute is more useful than a module option, because it makes it easier for userspace scripts to provide consistent behaviour (according to user configuration), regardless of whether the kernel includes this change. [1] Signed-off-by: Alan Jenkins Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 87 +++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 5838c69b2fb3..e954f2af5724 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -35,6 +35,7 @@ #include #include #include +#include #define EEEPC_LAPTOP_VERSION "0.1" #define EEEPC_LAPTOP_NAME "Eee PC Hotkey Driver" @@ -159,6 +160,7 @@ struct eeepc_laptop { acpi_handle handle; /* the handle of the acpi device */ u32 cm_supported; /* the control methods supported by this BIOS */ + bool cpufv_disabled; u16 event_count[128]; /* count for each event */ struct platform_device *platform_device; @@ -378,6 +380,8 @@ static ssize_t store_cpufv(struct device *dev, struct eeepc_cpufv c; int rv, value; + if (eeepc->cpufv_disabled) + return -EPERM; if (get_cpufv(eeepc, &c)) return -ENODEV; rv = parse_arg(buf, count, &value); @@ -389,6 +393,41 @@ static ssize_t store_cpufv(struct device *dev, return rv; } +static ssize_t show_cpufv_disabled(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct eeepc_laptop *eeepc = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", eeepc->cpufv_disabled); +} + +static ssize_t store_cpufv_disabled(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct eeepc_laptop *eeepc = dev_get_drvdata(dev); + int rv, value; + + rv = parse_arg(buf, count, &value); + if (rv < 0) + return rv; + + switch (value) { + case 0: + if (eeepc->cpufv_disabled) + pr_warning("cpufv enabled (not officially supported " + "on this model)\n"); + eeepc->cpufv_disabled = false; + return rv; + case 1: + return -EPERM; + default: + return -EINVAL; + } +} + + static struct device_attribute dev_attr_cpufv = { .attr = { .name = "cpufv", @@ -404,12 +443,22 @@ static struct device_attribute dev_attr_available_cpufv = { .show = show_available_cpufv }; +static struct device_attribute dev_attr_cpufv_disabled = { + .attr = { + .name = "cpufv_disabled", + .mode = 0644 }, + .show = show_cpufv_disabled, + .store = store_cpufv_disabled +}; + + static struct attribute *platform_attributes[] = { &dev_attr_camera.attr, &dev_attr_cardr.attr, &dev_attr_disp.attr, &dev_attr_cpufv.attr, &dev_attr_available_cpufv.attr, + &dev_attr_cpufv_disabled.attr, NULL }; @@ -1261,6 +1310,42 @@ static void eeepc_acpi_notify(struct acpi_device *device, u32 event) } } +static void eeepc_dmi_check(struct eeepc_laptop *eeepc) +{ + const char *model; + + /* + * Blacklist for setting cpufv (cpu speed). + * + * EeePC 4G ("701") implements CFVS, but it is not supported + * by the pre-installed OS, and the original option to change it + * in the BIOS setup screen was removed in later versions. + * + * Judging by the lack of "Super Hybrid Engine" on Asus product pages, + * this applies to all "701" models (4G/4G Surf/2G Surf). + * + * So Asus made a deliberate decision not to support it on this model. + * We have several reports that using it can cause the system to hang + * + * The hang has also been reported on a "702" (Model name "8G"?). + * + * We avoid dmi_check_system() / dmi_match(), because they use + * substring matching. We don't want to affect the "701SD" + * and "701SDX" models, because they do support S.H.E. + */ + + model = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!model) + return; + + if (strcmp(model, "701") == 0 || strcmp(model, "702") == 0) { + eeepc->cpufv_disabled = true; + pr_info("model %s does not officially support setting cpu " + "speed\n", model); + pr_info("cpufv disabled to avoid instability\n"); + } +} + static void cmsg_quirk(struct eeepc_laptop *eeepc, int cm, const char *name) { int dummy; @@ -1342,6 +1427,8 @@ static int __devinit eeepc_acpi_add(struct acpi_device *device) strcpy(acpi_device_class(device), EEEPC_ACPI_CLASS); device->driver_data = eeepc; + eeepc_dmi_check(eeepc); + result = eeepc_acpi_init(eeepc, device); if (result) goto fail_platform; From 10ae4b5663ff3092553bfbd867e7bd474ce6c553 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Wed, 6 Jan 2010 22:07:38 +0100 Subject: [PATCH 0946/1626] eeepc-laptop: dmi blacklist to disable pci hotplug code This is a short term workaround for Eeepc 1005HA. refs: Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index e954f2af5724..7fc944ac2070 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -161,6 +161,7 @@ struct eeepc_laptop { u32 cm_supported; /* the control methods supported by this BIOS */ bool cpufv_disabled; + bool hotplug_disabled; u16 event_count[128]; /* count for each event */ struct platform_device *platform_device; @@ -845,6 +846,9 @@ static int eeepc_rfkill_init(struct eeepc_laptop *eeepc) if (result && result != -ENODEV) goto exit; + if (eeepc->hotplug_disabled) + return 0; + result = eeepc_setup_pci_hotplug(eeepc); /* * If we get -EBUSY then something else is handling the PCI hotplug - @@ -1314,6 +1318,10 @@ static void eeepc_dmi_check(struct eeepc_laptop *eeepc) { const char *model; + model = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!model) + return; + /* * Blacklist for setting cpufv (cpu speed). * @@ -1333,17 +1341,24 @@ static void eeepc_dmi_check(struct eeepc_laptop *eeepc) * substring matching. We don't want to affect the "701SD" * and "701SDX" models, because they do support S.H.E. */ - - model = dmi_get_system_info(DMI_PRODUCT_NAME); - if (!model) - return; - if (strcmp(model, "701") == 0 || strcmp(model, "702") == 0) { eeepc->cpufv_disabled = true; pr_info("model %s does not officially support setting cpu " "speed\n", model); pr_info("cpufv disabled to avoid instability\n"); } + + /* + * Blacklist for wlan hotplug + * + * Eeepc 1005HA doesn't work like others models and don't need the + * hotplug code. In fact, current hotplug code seems to unplug another + * device... + */ + if (strcmp(model, "1005HA") == 0) { + eeepc->hotplug_disabled = true; + pr_info("wlan hotplug disabled\n"); + } } static void cmsg_quirk(struct eeepc_laptop *eeepc, int cm, const char *name) From 642e0447cb910ceabae0b4ea6c0cd3449d5c5abb Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 6 Jan 2010 22:07:39 +0100 Subject: [PATCH 0947/1626] eeepc-laptop: switch to using sparse keymap library Signed-off-by: Dmitry Torokhov Tested-by: Alan Jenkins Acked-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/Kconfig | 1 + drivers/platform/x86/eeepc-laptop.c | 186 ++++++++-------------------- 2 files changed, 52 insertions(+), 135 deletions(-) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index db32c25e3605..f526e735c5ab 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -364,6 +364,7 @@ config EEEPC_LAPTOP select HWMON select LEDS_CLASS select NEW_LEDS + select INPUT_SPARSEKMAP ---help--- This driver supports the Fn-Fx keys on Eee PC laptops. diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 7fc944ac2070..07d7978c558f 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -121,38 +122,28 @@ static const char *cm_setv[] = { NULL, NULL, "PBPS", "TPDS" }; -struct key_entry { - char type; - u8 code; - u16 keycode; -}; - -enum { KE_KEY, KE_END }; - static const struct key_entry eeepc_keymap[] = { - /* Sleep already handled via generic ACPI code */ - {KE_KEY, 0x10, KEY_WLAN }, - {KE_KEY, 0x11, KEY_WLAN }, - {KE_KEY, 0x12, KEY_PROG1 }, - {KE_KEY, 0x13, KEY_MUTE }, - {KE_KEY, 0x14, KEY_VOLUMEDOWN }, - {KE_KEY, 0x15, KEY_VOLUMEUP }, - {KE_KEY, 0x16, KEY_DISPLAY_OFF }, - {KE_KEY, 0x1a, KEY_COFFEE }, - {KE_KEY, 0x1b, KEY_ZOOM }, - {KE_KEY, 0x1c, KEY_PROG2 }, - {KE_KEY, 0x1d, KEY_PROG3 }, - {KE_KEY, NOTIFY_BRN_MIN, KEY_BRIGHTNESSDOWN }, - {KE_KEY, NOTIFY_BRN_MAX, KEY_BRIGHTNESSUP }, - {KE_KEY, 0x30, KEY_SWITCHVIDEOMODE }, - {KE_KEY, 0x31, KEY_SWITCHVIDEOMODE }, - {KE_KEY, 0x32, KEY_SWITCHVIDEOMODE }, - {KE_KEY, 0x37, KEY_F13 }, /* Disable Touchpad */ - {KE_KEY, 0x38, KEY_F14 }, - {KE_END, 0}, + { KE_KEY, 0x10, { KEY_WLAN } }, + { KE_KEY, 0x11, { KEY_WLAN } }, + { KE_KEY, 0x12, { KEY_PROG1 } }, + { KE_KEY, 0x13, { KEY_MUTE } }, + { KE_KEY, 0x14, { KEY_VOLUMEDOWN } }, + { KE_KEY, 0x15, { KEY_VOLUMEUP } }, + { KE_KEY, 0x16, { KEY_DISPLAY_OFF } }, + { KE_KEY, 0x1a, { KEY_COFFEE } }, + { KE_KEY, 0x1b, { KEY_ZOOM } }, + { KE_KEY, 0x1c, { KEY_PROG2 } }, + { KE_KEY, 0x1d, { KEY_PROG3 } }, + { KE_KEY, NOTIFY_BRN_MIN, { KEY_BRIGHTNESSDOWN } }, + { KE_KEY, NOTIFY_BRN_MAX, { KEY_BRIGHTNESSUP } }, + { KE_KEY, 0x30, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, 0x31, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, 0x32, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, 0x37, { KEY_F13 } }, /* Disable Touchpad */ + { KE_KEY, 0x38, { KEY_F14 } }, + { KE_END, 0 }, }; - /* * This is the main structure, we can use it to store useful information */ @@ -1143,120 +1134,42 @@ static void eeepc_backlight_exit(struct eeepc_laptop *eeepc) /* * Input device (i.e. hotkeys) */ -static struct key_entry *eeepc_get_entry_by_scancode( - struct eeepc_laptop *eeepc, - int code) -{ - struct key_entry *key; - - for (key = eeepc->keymap; key->type != KE_END; key++) - if (code == key->code) - return key; - - return NULL; -} - -static void eeepc_input_notify(struct eeepc_laptop *eeepc, int event) -{ - static struct key_entry *key; - - key = eeepc_get_entry_by_scancode(eeepc, event); - if (key) { - switch (key->type) { - case KE_KEY: - input_report_key(eeepc->inputdev, key->keycode, - 1); - input_sync(eeepc->inputdev); - input_report_key(eeepc->inputdev, key->keycode, - 0); - input_sync(eeepc->inputdev); - break; - } - } -} - -static struct key_entry *eeepc_get_entry_by_keycode( - struct eeepc_laptop *eeepc, int code) -{ - struct key_entry *key; - - for (key = eeepc->keymap; key->type != KE_END; key++) - if (code == key->keycode && key->type == KE_KEY) - return key; - - return NULL; -} - -static int eeepc_getkeycode(struct input_dev *dev, int scancode, int *keycode) -{ - struct eeepc_laptop *eeepc = input_get_drvdata(dev); - struct key_entry *key = eeepc_get_entry_by_scancode(eeepc, scancode); - - if (key && key->type == KE_KEY) { - *keycode = key->keycode; - return 0; - } - - return -EINVAL; -} - -static int eeepc_setkeycode(struct input_dev *dev, int scancode, int keycode) -{ - struct eeepc_laptop *eeepc = input_get_drvdata(dev); - struct key_entry *key; - int old_keycode; - - if (keycode < 0 || keycode > KEY_MAX) - return -EINVAL; - - key = eeepc_get_entry_by_scancode(eeepc, scancode); - if (key && key->type == KE_KEY) { - old_keycode = key->keycode; - key->keycode = keycode; - set_bit(keycode, dev->keybit); - if (!eeepc_get_entry_by_keycode(eeepc, old_keycode)) - clear_bit(old_keycode, dev->keybit); - return 0; - } - - return -EINVAL; -} - static int eeepc_input_init(struct eeepc_laptop *eeepc) { - const struct key_entry *key; - int result; + struct input_dev *input; + int error; - eeepc->inputdev = input_allocate_device(); - if (!eeepc->inputdev) { + input = input_allocate_device(); + if (!input) { pr_info("Unable to allocate input device\n"); return -ENOMEM; } - eeepc->inputdev->name = "Asus EeePC extra buttons"; - eeepc->inputdev->dev.parent = &eeepc->platform_device->dev; - eeepc->inputdev->phys = EEEPC_LAPTOP_FILE "/input0"; - eeepc->inputdev->id.bustype = BUS_HOST; - eeepc->inputdev->getkeycode = eeepc_getkeycode; - eeepc->inputdev->setkeycode = eeepc_setkeycode; - input_set_drvdata(eeepc->inputdev, eeepc); - eeepc->keymap = kmemdup(eeepc_keymap, sizeof(eeepc_keymap), - GFP_KERNEL); - for (key = eeepc_keymap; key->type != KE_END; key++) { - switch (key->type) { - case KE_KEY: - set_bit(EV_KEY, eeepc->inputdev->evbit); - set_bit(key->keycode, eeepc->inputdev->keybit); - break; - } + input->name = "Asus EeePC extra buttons"; + input->phys = EEEPC_LAPTOP_FILE "/input0"; + input->id.bustype = BUS_HOST; + input->dev.parent = &eeepc->platform_device->dev; + + error = sparse_keymap_setup(input, eeepc_keymap, NULL); + if (error) { + pr_err("Unable to setup input device keymap\n"); + goto err_free_dev; } - result = input_register_device(eeepc->inputdev); - if (result) { - pr_info("Unable to register input device\n"); - input_free_device(eeepc->inputdev); - return result; + + error = input_register_device(input); + if (error) { + pr_err("Unable to register input device\n"); + goto err_free_keymap; } + + eeepc->inputdev = input; return 0; + + err_free_keymap: + sparse_keymap_free(input); + err_free_dev: + input_free_device(input); + return error; } static void eeepc_input_exit(struct eeepc_laptop *eeepc) @@ -1306,11 +1219,12 @@ static void eeepc_acpi_notify(struct acpi_device *device, u32 event) * event will be desired value (or else ignored) */ } - eeepc_input_notify(eeepc, event); + sparse_keymap_report_event(eeepc->inputdev, event, + 1, true); } } else { /* Everything else is a bona-fide keypress event */ - eeepc_input_notify(eeepc, event); + sparse_keymap_report_event(eeepc->inputdev, event, 1, true); } } @@ -1554,10 +1468,12 @@ static int __init eeepc_laptop_init(void) result = acpi_bus_register_driver(&eeepc_acpi_driver); if (result < 0) goto fail_acpi_driver; + if (!eeepc_device_present) { result = -ENODEV; goto fail_no_device; } + return 0; fail_no_device: From 322a1356be96bcc4b97e8e370f6468c821330077 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Wed, 6 Jan 2010 22:07:40 +0100 Subject: [PATCH 0948/1626] eeepc-laptop: add hotplug_disable parameter Some new models need to disable wireless hotplug. For the moment, we don't know excactly what models need that, except 1005HA. Users will be able to use that param as a workaround. Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 07d7978c558f..a959abdea3a7 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -50,6 +50,14 @@ MODULE_AUTHOR("Corentin Chary, Eric Cooper"); MODULE_DESCRIPTION(EEEPC_LAPTOP_NAME); MODULE_LICENSE("GPL"); +static bool hotplug_disabled; + +module_param(hotplug_disabled, bool, 0644); +MODULE_PARM_DESC(hotplug_disabled, + "Disable hotplug for wireless device. " + "If your laptop need that, please report to " + "acpi4asus-user@lists.sourceforge.net."); + /* * Definitions for Asus EeePC */ @@ -1356,6 +1364,8 @@ static int __devinit eeepc_acpi_add(struct acpi_device *device) strcpy(acpi_device_class(device), EEEPC_ACPI_CLASS); device->driver_data = eeepc; + eeepc->hotplug_disabled = hotplug_disabled; + eeepc_dmi_check(eeepc); result = eeepc_acpi_init(eeepc, device); From 4194e2f551a6308e6ab34ac88210bf54858aa7df Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Wed, 6 Jan 2010 22:07:41 +0100 Subject: [PATCH 0949/1626] eeepc-laptop: disable wireless hotplug for 1201N Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index a959abdea3a7..e2be6bb33d92 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -1277,7 +1277,7 @@ static void eeepc_dmi_check(struct eeepc_laptop *eeepc) * hotplug code. In fact, current hotplug code seems to unplug another * device... */ - if (strcmp(model, "1005HA") == 0) { + if (strcmp(model, "1005HA") == 0 || strcmp(model, "1201N") == 0) { eeepc->hotplug_disabled = true; pr_info("wlan hotplug disabled\n"); } From 7a0b73a49ab56fb1e836675c00d6d0d2ba39a714 Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Mon, 28 Dec 2009 10:39:23 -0800 Subject: [PATCH 0950/1626] ACPI: Fix section mismatch error for acpi_early_processor_set_pdc() Alex Chiang introduced acpi_early_processor_set_pdc() in commit: ACPI: processor: call _PDC early 78f1699659963fff97975df44db6d5dbe7218e55 But this results in a section mismatch: WARNING: drivers/acpi/acpi.o(.text+0xa9c1): Section mismatch in reference from the function acpi_early_processor_set_pdc() to the variable .cpuinit.data:processor_idle_dmi_table The function acpi_early_processor_set_pdc() references the variable __cpuinitdata processor_idle_dmi_table. This is often because acpi_early_processor_set_pdc lacks a __cpuinitdata annotation or the annotation of processor_idle_dmi_table is wrong. The only caller of acpi_early_processor_set_pdc() is acpi_bus_init() which is an "__init" function. So the correct fix here is to mark acpi_early_processor_set_pdc() "__init" too. Signed-off-by: Tony Luck Acked-by: Alex Chiang Signed-off-by: Len Brown --- drivers/acpi/processor_pdc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c index 30e4dc0cdf30..7d4ee394d0b3 100644 --- a/drivers/acpi/processor_pdc.c +++ b/drivers/acpi/processor_pdc.c @@ -151,7 +151,7 @@ early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK; } -void acpi_early_processor_set_pdc(void) +void __init acpi_early_processor_set_pdc(void) { /* * Check whether the system is DMI table. If yes, OSPM From d00c362f1b0ff54161e0a42b4554ac621a9ef92d Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Sat, 16 Jan 2010 01:04:04 -0800 Subject: [PATCH 0951/1626] ax25: netrom: rose: Fix timer oopses Wrong ax25_cb refcounting in ax25_send_frame() and by its callers can cause timer oopses (first reported with 2.6.29.6 kernel). Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=14905 Reported-by: Bernard Pidoux Tested-by: Bernard Pidoux Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- include/net/netrom.h | 2 ++ net/ax25/ax25_out.c | 6 ++++++ net/netrom/nr_route.c | 11 ++++++----- net/rose/rose_link.c | 8 ++++++++ net/rose/rose_route.c | 5 +++++ 5 files changed, 27 insertions(+), 5 deletions(-) diff --git a/include/net/netrom.h b/include/net/netrom.h index 15696b1fd30f..ab170a60e7d3 100644 --- a/include/net/netrom.h +++ b/include/net/netrom.h @@ -132,6 +132,8 @@ static __inline__ void nr_node_put(struct nr_node *nr_node) static __inline__ void nr_neigh_put(struct nr_neigh *nr_neigh) { if (atomic_dec_and_test(&nr_neigh->refcount)) { + if (nr_neigh->ax25) + ax25_cb_put(nr_neigh->ax25); kfree(nr_neigh->digipeat); kfree(nr_neigh); } diff --git a/net/ax25/ax25_out.c b/net/ax25/ax25_out.c index bf706f83a5c9..14912600ec57 100644 --- a/net/ax25/ax25_out.c +++ b/net/ax25/ax25_out.c @@ -92,6 +92,12 @@ ax25_cb *ax25_send_frame(struct sk_buff *skb, int paclen, ax25_address *src, ax2 #endif } + /* + * There is one ref for the state machine; a caller needs + * one more to put it back, just like with the existing one. + */ + ax25_cb_hold(ax25); + ax25_cb_add(ax25); ax25->state = AX25_STATE_1; diff --git a/net/netrom/nr_route.c b/net/netrom/nr_route.c index aacba76070fc..e2e2d33cafdf 100644 --- a/net/netrom/nr_route.c +++ b/net/netrom/nr_route.c @@ -843,12 +843,13 @@ int nr_route_frame(struct sk_buff *skb, ax25_cb *ax25) dptr = skb_push(skb, 1); *dptr = AX25_P_NETROM; - ax25s = ax25_send_frame(skb, 256, (ax25_address *)dev->dev_addr, &nr_neigh->callsign, nr_neigh->digipeat, nr_neigh->dev); - if (nr_neigh->ax25 && ax25s) { - /* We were already holding this ax25_cb */ + ax25s = nr_neigh->ax25; + nr_neigh->ax25 = ax25_send_frame(skb, 256, + (ax25_address *)dev->dev_addr, + &nr_neigh->callsign, + nr_neigh->digipeat, nr_neigh->dev); + if (ax25s) ax25_cb_put(ax25s); - } - nr_neigh->ax25 = ax25s; dev_put(dev); ret = (nr_neigh->ax25 != NULL); diff --git a/net/rose/rose_link.c b/net/rose/rose_link.c index bd86a63960ce..5ef5f6988a2e 100644 --- a/net/rose/rose_link.c +++ b/net/rose/rose_link.c @@ -101,13 +101,17 @@ static void rose_t0timer_expiry(unsigned long param) static int rose_send_frame(struct sk_buff *skb, struct rose_neigh *neigh) { ax25_address *rose_call; + ax25_cb *ax25s; if (ax25cmp(&rose_callsign, &null_ax25_address) == 0) rose_call = (ax25_address *)neigh->dev->dev_addr; else rose_call = &rose_callsign; + ax25s = neigh->ax25; neigh->ax25 = ax25_send_frame(skb, 260, rose_call, &neigh->callsign, neigh->digipeat, neigh->dev); + if (ax25s) + ax25_cb_put(ax25s); return (neigh->ax25 != NULL); } @@ -120,13 +124,17 @@ static int rose_send_frame(struct sk_buff *skb, struct rose_neigh *neigh) static int rose_link_up(struct rose_neigh *neigh) { ax25_address *rose_call; + ax25_cb *ax25s; if (ax25cmp(&rose_callsign, &null_ax25_address) == 0) rose_call = (ax25_address *)neigh->dev->dev_addr; else rose_call = &rose_callsign; + ax25s = neigh->ax25; neigh->ax25 = ax25_find_cb(rose_call, &neigh->callsign, neigh->digipeat, neigh->dev); + if (ax25s) + ax25_cb_put(ax25s); return (neigh->ax25 != NULL); } diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c index 795c4b025e31..70a0b3b4b4d2 100644 --- a/net/rose/rose_route.c +++ b/net/rose/rose_route.c @@ -235,6 +235,8 @@ static void rose_remove_neigh(struct rose_neigh *rose_neigh) if ((s = rose_neigh_list) == rose_neigh) { rose_neigh_list = rose_neigh->next; + if (rose_neigh->ax25) + ax25_cb_put(rose_neigh->ax25); kfree(rose_neigh->digipeat); kfree(rose_neigh); return; @@ -243,6 +245,8 @@ static void rose_remove_neigh(struct rose_neigh *rose_neigh) while (s != NULL && s->next != NULL) { if (s->next == rose_neigh) { s->next = rose_neigh->next; + if (rose_neigh->ax25) + ax25_cb_put(rose_neigh->ax25); kfree(rose_neigh->digipeat); kfree(rose_neigh); return; @@ -812,6 +816,7 @@ void rose_link_failed(ax25_cb *ax25, int reason) if (rose_neigh != NULL) { rose_neigh->ax25 = NULL; + ax25_cb_put(ax25); rose_del_route_by_neigh(rose_neigh); rose_kill_by_neigh(rose_neigh); From 8ad08d8a0c3823e9b06ef84c362c9361be323d2d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 16 Jan 2010 12:56:08 -0500 Subject: [PATCH 0952/1626] may_umount() needs namespace_sem otherwise it races with clone_mnt() changing mnt_share/mnt_slaves Signed-off-by: Al Viro --- fs/namespace.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/namespace.c b/fs/namespace.c index 7d70d63ceb29..461090a57b33 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -965,10 +965,12 @@ EXPORT_SYMBOL(may_umount_tree); int may_umount(struct vfsmount *mnt) { int ret = 1; + down_read(&namespace_sem); spin_lock(&vfsmount_lock); if (propagate_mount_busy(mnt, 2)) ret = 0; spin_unlock(&vfsmount_lock); + up_read(&namespace_sem); return ret; } From df1a1ad29739f032f8905310796e558589403d61 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 16 Jan 2010 12:57:40 -0500 Subject: [PATCH 0953/1626] attach_recursive_mnt() needs to hold vfsmount_lock over set_mnt_shared() race in mnt_flags update Signed-off-by: Al Viro --- fs/namespace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/namespace.c b/fs/namespace.c index 461090a57b33..4de493ea67cf 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1354,12 +1354,12 @@ static int attach_recursive_mnt(struct vfsmount *source_mnt, if (err) goto out_cleanup_ids; + spin_lock(&vfsmount_lock); + if (IS_MNT_SHARED(dest_mnt)) { for (p = source_mnt; p; p = next_mnt(p, source_mnt)) set_mnt_shared(p); } - - spin_lock(&vfsmount_lock); if (parent_path) { detach_mnt(source_mnt, parent_path); attach_mnt(source_mnt, path); From 7b43a79f32c0a05e7562043af98e25c05c89b18e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 16 Jan 2010 13:01:26 -0500 Subject: [PATCH 0954/1626] mnt_flags fixes in do_remount() * need vfsmount_lock over modifying it * need to preserve MNT_SHARED/MNT_UNBINDABLE Signed-off-by: Al Viro --- fs/namespace.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/namespace.c b/fs/namespace.c index 4de493ea67cf..779293e29b85 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1536,8 +1536,12 @@ static int do_remount(struct path *path, int flags, int mnt_flags, err = change_mount_flags(path->mnt, flags); else err = do_remount_sb(sb, flags, data, 0); - if (!err) + if (!err) { + spin_lock(&vfsmount_lock); + mnt_flags |= path->mnt->mnt_flags & MNT_PNODE_MASK; path->mnt->mnt_flags = mnt_flags; + spin_unlock(&vfsmount_lock); + } up_write(&sb->s_umount); if (!err) { security_sb_post_remount(path->mnt, flags, data); From 7e1295d9f8300e8c8d1af01765f475621c19ee1d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 16 Jan 2010 13:06:32 -0500 Subject: [PATCH 0955/1626] CIFS shouldn't make mountpoints shrinkable Signed-off-by: Al Viro --- fs/cifs/cifs_dfs_ref.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index fea9e898c4ba..b44ce0a0711c 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -269,7 +269,7 @@ static int add_mount_helper(struct vfsmount *newmnt, struct nameidata *nd, int err; mntget(newmnt); - err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags, mntlist); + err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags | MNT_SHRINKABLE, mntlist); switch (err) { case 0: path_put(&nd->path); @@ -371,7 +371,6 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd) if (IS_ERR(mnt)) goto out_err; - nd->path.mnt->mnt_flags |= MNT_SHRINKABLE; rc = add_mount_helper(mnt, nd, &cifs_dfs_automount_list); out: From 27d55f1f4c190b14092fcca3069c7d15df83514f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 16 Jan 2010 13:07:36 -0500 Subject: [PATCH 0956/1626] do_add_mount() should sanitize mnt_flags MNT_WRITE_HOLD shouldn't leak into new vfsmount and neither should MNT_SHARED (the latter will be set properly, along with the rest of shared-subtree data structures) Signed-off-by: Al Viro --- fs/namespace.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/namespace.c b/fs/namespace.c index 779293e29b85..c768f733c8d6 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1671,6 +1671,8 @@ int do_add_mount(struct vfsmount *newmnt, struct path *path, { int err; + mnt_flags &= ~(MNT_SHARED | MNT_WRITE_HOLD); + down_write(&namespace_sem); /* Something was mounted here while we slept */ while (d_mountpoint(path->dentry) && From 0b2c3688445ff02d3f1bfffc6983417b28f8c3da Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sat, 16 Jan 2010 20:43:12 +0100 Subject: [PATCH 0957/1626] i2c-core: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 0ac2f90ab840..d610e995bbfd 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -248,7 +248,7 @@ static const struct attribute_group *i2c_dev_attr_groups[] = { NULL }; -const static struct dev_pm_ops i2c_device_pm_ops = { +static const struct dev_pm_ops i2c_device_pm_ops = { .suspend = i2c_device_pm_suspend, .resume = i2c_device_pm_resume, }; From b6a3195070fe1c12d0bb1099ffe997d8abf9f602 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sat, 16 Jan 2010 20:43:12 +0100 Subject: [PATCH 0958/1626] i2c: Test off by one in {piix4,vt596}_transaction() With `while (timeout++ < MAX_TIMEOUT)' timeout reaches MAX_TIMEOUT + 1 after the loop. This is probably unlikely to produce a problem. Signed-off-by: Roel Kluin Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-piix4.c | 4 ++-- drivers/i2c/busses/i2c-viapro.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 1e245e9cad31..e56e4b6823ca 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -324,12 +324,12 @@ static int piix4_transaction(void) else msleep(1); - while ((timeout++ < MAX_TIMEOUT) && + while ((++timeout < MAX_TIMEOUT) && ((temp = inb_p(SMBHSTSTS)) & 0x01)) msleep(1); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout == MAX_TIMEOUT) { dev_err(&piix4_adapter.dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index e4b1543015af..a84a909e1234 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -165,10 +165,10 @@ static int vt596_transaction(u8 size) do { msleep(1); temp = inb_p(SMBHSTSTS); - } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT)); + } while ((temp & 0x01) && (++timeout < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout == MAX_TIMEOUT) { result = -ETIMEDOUT; dev_err(&vt596_adapter.dev, "SMBus timeout!\n"); } From 7d53e79f9ec2842269754efbe34f53aa480d99e3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?M=C3=A1rton=20N=C3=A9meth?= Date: Sat, 16 Jan 2010 20:43:13 +0100 Subject: [PATCH 0959/1626] i2c-ali1563: Remove sparse warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove the following sparse warnings (see "make C=1"): * drivers/i2c/busses/i2c-ali1563.c:91:3: warning: do-while statement is not a compound statement * drivers/i2c/busses/i2c-ali1563.c:161:3: warning: do-while statement is not a compound statement Signed-off-by: Márton Németh Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-ali1563.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index f70f46582c6c..4687af40dd50 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -87,9 +87,9 @@ static int ali1563_transaction(struct i2c_adapter * a, int size) outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2); timeout = ALI1563_MAX_TIMEOUT; - do + do { msleep(1); - while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout); + } while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout); dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, " "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", @@ -157,9 +157,9 @@ static int ali1563_block_start(struct i2c_adapter * a) outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2); timeout = ALI1563_MAX_TIMEOUT; - do + do { msleep(1); - while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout); + } while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout); dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, " "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", From 22f8b2695eda496026623020811cae34590ee3d7 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 16 Jan 2010 20:43:13 +0100 Subject: [PATCH 0960/1626] i2c/pca: Don't use *_interruptible Unexpected signals can disturb the bus-handling and lock it up. Don't use interruptible in 'wait_event_*' and 'wake_*' as in commits dc1972d02747d2170fb1d78d114801f5ecb27506 (for cpm), 1ab082d7cbd0f34e39a5396cc6340c00bc5d66ef (for mpc), b7af349b175af45f9d87b3bf3f0a221e1831ed39 (for omap). Signed-off-by: Wolfram Sang Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-pca-isa.c | 4 ++-- drivers/i2c/busses/i2c-pca-platform.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index 0ed68e2ccd22..f7346a9bd95f 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -75,7 +75,7 @@ static int pca_isa_waitforcompletion(void *pd) unsigned long timeout; if (irq > -1) { - ret = wait_event_interruptible_timeout(pca_wait, + ret = wait_event_timeout(pca_wait, pca_isa_readbyte(pd, I2C_PCA_CON) & I2C_PCA_CON_SI, pca_isa_ops.timeout); } else { @@ -96,7 +96,7 @@ static void pca_isa_resetchip(void *pd) } static irqreturn_t pca_handler(int this_irq, void *dev_id) { - wake_up_interruptible(&pca_wait); + wake_up(&pca_wait); return IRQ_HANDLED; } diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c index c4df9d411cd5..5b2213df5ed0 100644 --- a/drivers/i2c/busses/i2c-pca-platform.c +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -84,7 +84,7 @@ static int i2c_pca_pf_waitforcompletion(void *pd) unsigned long timeout; if (i2c->irq) { - ret = wait_event_interruptible_timeout(i2c->wait, + ret = wait_event_timeout(i2c->wait, i2c->algo_data.read_byte(i2c, I2C_PCA_CON) & I2C_PCA_CON_SI, i2c->adap.timeout); } else { @@ -122,7 +122,7 @@ static irqreturn_t i2c_pca_pf_handler(int this_irq, void *dev_id) if ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0) return IRQ_NONE; - wake_up_interruptible(&i2c->wait); + wake_up(&i2c->wait); return IRQ_HANDLED; } From c556752109794a5ff199b80a1673336b4df8433a Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Sat, 16 Jan 2010 20:43:13 +0100 Subject: [PATCH 0961/1626] i2c: Do not use device name after device_unregister MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit dev_dbg outputs dev_name, which is released with device_unregister. This bug resulted in output like this: i2c Xy2�0: adapter [SMBus I801 adapter at 1880] unregistered The right output would be: i2c i2c-0: adapter [SMBus I801 adapter at 1880] unregistered Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index d610e995bbfd..10be7b5fbe97 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -843,6 +843,9 @@ int i2c_del_adapter(struct i2c_adapter *adap) adap->dev.parent); #endif + /* device name is gone after device_unregister */ + dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name); + /* clean up the sysfs representation */ init_completion(&adap->dev_released); device_unregister(&adap->dev); @@ -855,8 +858,6 @@ int i2c_del_adapter(struct i2c_adapter *adap) idr_remove(&i2c_adapter_idr, adap->nr); mutex_unlock(&core_lock); - dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name); - /* Clear the device structure in case this adapter is ever going to be added again */ memset(&adap->dev, 0, sizeof(adap->dev)); From 7e105057a34c83cea542dacc55ff0528bce67afa Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Fri, 15 Jan 2010 17:01:02 -0800 Subject: [PATCH 0962/1626] kfifo: fix kfifo_out_locked race bug Fix a wrong optimization in include/linux/kfifo.h which could cause a race in kfifo_out_locked. Signed-off-by: Stefani Seibold Reported-by: Johan Hovold Cc: Pete Zaitcev Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kfifo.h | 7 ------- 1 file changed, 7 deletions(-) diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index 7c6b32a1421c..c4ac88b3c302 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -228,13 +228,6 @@ static inline __must_check unsigned int kfifo_out_locked(struct kfifo *fifo, ret = kfifo_out(fifo, to, n); - /* - * optimization: if the FIFO is empty, set the indices to 0 - * so we don't wrap the next time - */ - if (kfifo_is_empty(fifo)) - kfifo_reset(fifo); - spin_unlock_irqrestore(lock, flags); return ret; From 0b94190e1e60f96962b82d35729d7d44cf298ef8 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Fri, 15 Jan 2010 17:01:03 -0800 Subject: [PATCH 0963/1626] viafb: fix LCD hardware cursor regression Although I'd consider this a hardware bug, as there is hardware out that for whatever reason does not support hardware cursors on LCD output we have to care about it in the driver. This fixes a regression (invisible cursor) introduced by: viafb: cleanup viafb_cursor Signed-off-by: Florian Tobias Schandinat Reported-by: Julian Wollrath Tested-by: Julian Wollrath Cc: Scott Fang Cc: Joseph Chan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/via/viafbdev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c index d8df17a7d5fc..a0004c17af6c 100644 --- a/drivers/video/via/viafbdev.c +++ b/drivers/video/via/viafbdev.c @@ -872,7 +872,9 @@ static int viafb_cursor(struct fb_info *info, struct fb_cursor *cursor) if (info->flags & FBINFO_HWACCEL_DISABLED || info != viafbinfo) return -ENODEV; - if (chip_name == UNICHROME_CLE266 && viapar->iga_path == IGA2) + /* LCD ouput does not support hw cursors (at least on VN896) */ + if ((chip_name == UNICHROME_CLE266 && viapar->iga_path == IGA2) || + viafb_LCD_ON) return -ENODEV; viafb_show_hw_cursor(info, HW_Cursor_OFF); From 8a3a95c32f612068be8dae74fa5fc4cf2db1592e Mon Sep 17 00:00:00 2001 From: Erik-Jan Post Date: Fri, 15 Jan 2010 17:01:05 -0800 Subject: [PATCH 0964/1626] viafb: do modesetting after updating variables Reorder viafb_set_par to allow using the updated variables in viafb_setmode. This fixes a regression that prevented proper runtime mode changes. Signed-off-by: Erik-Jan Post Signed-off-by: Florian Tobias Schandinat Cc: Scott Fang Cc: Joseph Chan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/via/viafbdev.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c index a0004c17af6c..3028e7ddc3b5 100644 --- a/drivers/video/via/viafbdev.c +++ b/drivers/video/via/viafbdev.c @@ -177,16 +177,15 @@ static int viafb_set_par(struct fb_info *info) } if (vmode_index != VIA_RES_INVALID) { - viafb_setmode(vmode_index, info->var.xres, info->var.yres, - info->var.bits_per_pixel, vmode_index1, - viafb_second_xres, viafb_second_yres, viafb_bpp1); - viafb_update_fix(info); viafb_bpp = info->var.bits_per_pixel; if (info->var.accel_flags & FB_ACCELF_TEXT) info->flags &= ~FBINFO_HWACCEL_DISABLED; else info->flags |= FBINFO_HWACCEL_DISABLED; + viafb_setmode(vmode_index, info->var.xres, info->var.yres, + info->var.bits_per_pixel, vmode_index1, + viafb_second_xres, viafb_second_yres, viafb_bpp1); } return 0; From 97922b5462fa543484831d42ab0fe4562b9373fc Mon Sep 17 00:00:00 2001 From: Erik-Jan Post Date: Fri, 15 Jan 2010 17:01:06 -0800 Subject: [PATCH 0965/1626] viafb: fix acceleration for some chips Fix a regression in hardware acceleration which made the accelerated framebuffer unusable on some chips. These need extra initialization and an extra flag which is no longer needed/available on current chips. Signed-off-by: Erik-Jan Post Signed-off-by: Florian Tobias Schandinat Cc: Scott Fang Cc: Joseph Chan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/via/accel.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/video/via/accel.c b/drivers/video/via/accel.c index 9d4f3a49ba4a..d5077dfa9e00 100644 --- a/drivers/video/via/accel.c +++ b/drivers/video/via/accel.c @@ -137,7 +137,7 @@ static int hw_bitblt_1(void __iomem *engine, u8 op, u32 width, u32 height, tmp, dst_pitch); return -EINVAL; } - tmp = (tmp >> 3) | (dst_pitch << (16 - 3)); + tmp = VIA_PITCH_ENABLE | (tmp >> 3) | (dst_pitch << (16 - 3)); writel(tmp, engine + 0x38); if (op == VIA_BITBLT_FILL) @@ -352,6 +352,9 @@ int viafb_init_engine(struct fb_info *info) viapar->shared->vq_vram_addr = viapar->fbmem_free; viapar->fbmem_used += VQ_SIZE; + /* Init 2D engine reg to reset 2D engine */ + writel(0x0, engine + VIA_REG_KEYCONTROL); + /* Init AGP and VQ regs */ switch (chip_name) { case UNICHROME_K8M890: From 1f8cdae43929d32e3706c314eb2a302dc3683fba Mon Sep 17 00:00:00 2001 From: Hui Zhu Date: Fri, 15 Jan 2010 17:01:07 -0800 Subject: [PATCH 0966/1626] markup_oops.pl: fix error with x86 When I try to use markup_oops.pl in x86, I always get: cat 1 | perl markup_oops.pl ./vmlinux objdump: --start-address: bad number: NaN No matching code found This is because in line: if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/[a-f0-9]/) { $function = $1; $func_offset = $2; } $func_offset will get a number like "0x2" But in follow code: my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset"); It add other ox to ox2. Then this value will be set to NaN. So I made a small patch to fix it. Signed-off-by: Hui Zhu Acked-by: Arjan van de Ven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/markup_oops.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl index 5f0fcb712e29..ce3e40b01e48 100644 --- a/scripts/markup_oops.pl +++ b/scripts/markup_oops.pl @@ -154,7 +154,7 @@ while () { if ($line =~ /RIP: 0010:\[\<([a-z0-9]+)\>\]/) { $target = $1; } - if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) { + if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) { $function = $1; $func_offset = $2; } From 3018aa4b1a46946dfd0ee73a533038f24e390539 Mon Sep 17 00:00:00 2001 From: Ping Date: Fri, 15 Jan 2010 17:01:07 -0800 Subject: [PATCH 0967/1626] serial/8250_pnp: add a new Fujitsu Wacom Tablet PC device This is a new two finger touch Fujitsu Wacom Tablet PC. Signed-off-by: Ping Cheng Cc: Alan Cox Cc: Dmitry Torokhov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250_pnp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index 36ede02ceacf..b5496a19d967 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -354,6 +354,8 @@ static const struct pnp_device_id pnp_dev_table[] = { { "FUJ02E5", 0 }, /* Fujitsu P-series tablet PC device */ { "FUJ02E6", 0 }, + /* Fujitsu Wacom 2FGT Tablet PC device */ + { "FUJ02E7", 0 }, /* * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in * disguise) From 355e8e8d1b0779fccb6ca1351fb73c71985e22b2 Mon Sep 17 00:00:00 2001 From: john stultz Date: Fri, 15 Jan 2010 17:01:09 -0800 Subject: [PATCH 0968/1626] m68knommu: fix invalid flags on coldfire pit clocksource The m68knommu coldfire pit clocksource looks like it was incorrectly marked as a continuous clocksource. Running with it marked as a continuous clocksource could cause hangs when the system switches to highres mode or enables nohz. This patch removes the CLOCK_SOURCE_IS_CONTINUOUS flag on the coldfire pit clocksource. This will disallow systems using this clocksource from entering oneshot mode (disabling highres timers and nohz). Signed-off-by: John Stultz Acked-by: Greg Ungerer Cc: Steven King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m68knommu/platform/coldfire/pit.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c index d8720ee34510..aebea19abd78 100644 --- a/arch/m68knommu/platform/coldfire/pit.c +++ b/arch/m68knommu/platform/coldfire/pit.c @@ -146,7 +146,6 @@ static struct clocksource pit_clk = { .read = pit_read_clk, .shift = 20, .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; /***************************************************************************/ From 118f3e1afd5534c15f9701f33514186cfc841a27 Mon Sep 17 00:00:00 2001 From: Tamas Vincze Date: Fri, 15 Jan 2010 17:01:10 -0800 Subject: [PATCH 0969/1626] edac: i5000_edac critical fix panic out of bounds EDAC MC0: INTERNAL ERROR: channel-b out of range (4 >= 4) Kernel panic - not syncing: EDAC MC0: Uncorrected Error (XEN) Domain 0 crashed: 'noreboot' set - not rebooting. This happens because FERR_NF_FBD bit 28 is not updated on i5000. Due to that, both bits 28 and 29 may be equal to one, returning channel = 3. As this value is invalid, EDAC core generates the panic. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14568 Signed-off-by: Tamas Vincze Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/i5000_edac.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index 77a9579d7167..adc10a2ac5f6 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -577,7 +577,13 @@ static void i5000_process_nonfatal_error_info(struct mem_ctl_info *mci, debugf0("\tUncorrected bits= 0x%x\n", ue_errors); branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd); - channel = branch; + + /* + * According with i5000 datasheet, bit 28 has no significance + * for errors M4Err-M12Err and M17Err-M21Err, on FERR_NF_FBD + */ + channel = branch & 2; + bank = NREC_BANK(info->nrecmema); rank = NREC_RANK(info->nrecmema); rdwr = NREC_RDWR(info->nrecmema); From 2427b8e3eaea3719e53bbed7b3375382c3aa6f13 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 15 Jan 2010 17:01:11 -0800 Subject: [PATCH 0970/1626] tty.h: make tty_port_get() static inline I get a few dozen of these warnings when using gcc (GCC) 4.4.1 20090725 (Red Hat 4.4.1-2): In file included from mmotm-2010-0113-1217/init/do_mounts.c:5: mmotm-2010-0113-1217/include/linux/tty.h: In function 'tty_port_get': mmotm-2010-0113-1217/include/linux/tty.h:469: warning: '______f' is static but declared in inline function 'tty_port_get' which is not static so make the function static inline. [akpm@linux-foundation.org: may as well convert tty_port_users() also] Signed-off-by: Randy Dunlap Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/tty.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/tty.h b/include/linux/tty.h index ef3a2947b102..6abfcf5b5887 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -464,7 +464,7 @@ extern int tty_port_alloc_xmit_buf(struct tty_port *port); extern void tty_port_free_xmit_buf(struct tty_port *port); extern void tty_port_put(struct tty_port *port); -extern inline struct tty_port *tty_port_get(struct tty_port *port) +static inline struct tty_port *tty_port_get(struct tty_port *port) { if (port) kref_get(&port->kref); @@ -486,7 +486,7 @@ extern void tty_port_close(struct tty_port *port, struct tty_struct *tty, struct file *filp); extern int tty_port_open(struct tty_port *port, struct tty_struct *tty, struct file *filp); -extern inline int tty_port_users(struct tty_port *port) +static inline int tty_port_users(struct tty_port *port) { return port->count + port->blocked_open; } From 8ecc2951534af10e04ddb5e5ff5c6d217b79f5c2 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 15 Jan 2010 17:01:12 -0800 Subject: [PATCH 0971/1626] kfifo: use void * pointers for user buffers The pointers to user buffers are currently unsigned char *, which requires a lot of casting in the caller for any non-char typed buffers. Use void * instead. Signed-off-by: Andi Kleen Acked-by: Stefani Seibold Cc: Roland Dreier Cc: Dmitry Torokhov Cc: Andy Walls Cc: Vikram Dhillon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kfifo.h | 10 +++++----- kernel/kfifo.c | 8 ++++---- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index c4ac88b3c302..6fb495ea956a 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -104,15 +104,15 @@ union { \ #undef __kfifo_initializer -extern void kfifo_init(struct kfifo *fifo, unsigned char *buffer, +extern void kfifo_init(struct kfifo *fifo, void *buffer, unsigned int size); extern __must_check int kfifo_alloc(struct kfifo *fifo, unsigned int size, gfp_t gfp_mask); extern void kfifo_free(struct kfifo *fifo); extern unsigned int kfifo_in(struct kfifo *fifo, - const unsigned char *from, unsigned int len); + const void *from, unsigned int len); extern __must_check unsigned int kfifo_out(struct kfifo *fifo, - unsigned char *to, unsigned int len); + void *to, unsigned int len); /** * kfifo_reset - removes the entire FIFO contents @@ -194,7 +194,7 @@ static inline __must_check unsigned int kfifo_avail(struct kfifo *fifo) * bytes copied. */ static inline unsigned int kfifo_in_locked(struct kfifo *fifo, - const unsigned char *from, unsigned int n, spinlock_t *lock) + const void *from, unsigned int n, spinlock_t *lock) { unsigned long flags; unsigned int ret; @@ -219,7 +219,7 @@ static inline unsigned int kfifo_in_locked(struct kfifo *fifo, * @to buffer and returns the number of copied bytes. */ static inline __must_check unsigned int kfifo_out_locked(struct kfifo *fifo, - unsigned char *to, unsigned int n, spinlock_t *lock) + void *to, unsigned int n, spinlock_t *lock) { unsigned long flags; unsigned int ret; diff --git a/kernel/kfifo.c b/kernel/kfifo.c index e92d519f93b1..ab615e695052 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -28,7 +28,7 @@ #include #include -static void _kfifo_init(struct kfifo *fifo, unsigned char *buffer, +static void _kfifo_init(struct kfifo *fifo, void *buffer, unsigned int size) { fifo->buffer = buffer; @@ -44,7 +44,7 @@ static void _kfifo_init(struct kfifo *fifo, unsigned char *buffer, * @size: the size of the internal buffer, this have to be a power of 2. * */ -void kfifo_init(struct kfifo *fifo, unsigned char *buffer, unsigned int size) +void kfifo_init(struct kfifo *fifo, void *buffer, unsigned int size) { /* size must be a power of 2 */ BUG_ON(!is_power_of_2(size)); @@ -235,7 +235,7 @@ EXPORT_SYMBOL(__kfifo_in_n); * Note that with only one concurrent reader and one concurrent * writer, you don't need extra locking to use these functions. */ -unsigned int kfifo_in(struct kfifo *fifo, const unsigned char *from, +unsigned int kfifo_in(struct kfifo *fifo, const void *from, unsigned int len) { len = min(kfifo_avail(fifo), len); @@ -277,7 +277,7 @@ EXPORT_SYMBOL(__kfifo_out_n); * Note that with only one concurrent reader and one concurrent * writer, you don't need extra locking to use these functions. */ -unsigned int kfifo_out(struct kfifo *fifo, unsigned char *to, unsigned int len) +unsigned int kfifo_out(struct kfifo *fifo, void *to, unsigned int len) { len = min(kfifo_len(fifo), len); From 64ce1037c5434b1d036cd99ecaee6e00496bc2e9 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 15 Jan 2010 17:01:15 -0800 Subject: [PATCH 0972/1626] kfifo: sanitize *_user error handling Right now for kfifo_*_user it's not easily possible to distingush between a user copy failing and the FIFO not containing enough data. The problem is that both conditions are multiplexed into the same return code. Avoid this by moving the "copy length" into a separate output parameter and only return 0/-EFAULT in the main return value. I didn't fully adapt the weird "record" variants, those seem to be unused anyways and were rather messy (should they be just removed?) I would appreciate some double checking if I did all the conversions correctly. Signed-off-by: Andi Kleen Cc: Stefani Seibold Cc: Roland Dreier Cc: Dmitry Torokhov Cc: Andy Walls Cc: Vikram Dhillon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kfifo.h | 8 ++--- kernel/kfifo.c | 76 ++++++++++++++++++++++++++++--------------- 2 files changed, 53 insertions(+), 31 deletions(-) diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index 6fb495ea956a..86ad50a900c8 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -235,11 +235,11 @@ static inline __must_check unsigned int kfifo_out_locked(struct kfifo *fifo, extern void kfifo_skip(struct kfifo *fifo, unsigned int len); -extern __must_check unsigned int kfifo_from_user(struct kfifo *fifo, - const void __user *from, unsigned int n); +extern __must_check int kfifo_from_user(struct kfifo *fifo, + const void __user *from, unsigned int n, unsigned *lenout); -extern __must_check unsigned int kfifo_to_user(struct kfifo *fifo, - void __user *to, unsigned int n); +extern __must_check int kfifo_to_user(struct kfifo *fifo, + void __user *to, unsigned int n, unsigned *lenout); /* * __kfifo_add_out internal helper function for updating the out offset diff --git a/kernel/kfifo.c b/kernel/kfifo.c index ab615e695052..b50bb622e8b0 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -159,8 +159,9 @@ static inline void __kfifo_out_data(struct kfifo *fifo, memcpy(to + l, fifo->buffer, len - l); } -static inline unsigned int __kfifo_from_user_data(struct kfifo *fifo, - const void __user *from, unsigned int len, unsigned int off) +static inline int __kfifo_from_user_data(struct kfifo *fifo, + const void __user *from, unsigned int len, unsigned int off, + unsigned *lenout) { unsigned int l; int ret; @@ -177,16 +178,20 @@ static inline unsigned int __kfifo_from_user_data(struct kfifo *fifo, /* first put the data starting from fifo->in to buffer end */ l = min(len, fifo->size - off); ret = copy_from_user(fifo->buffer + off, from, l); - - if (unlikely(ret)) - return ret + len - l; + if (unlikely(ret)) { + *lenout = ret; + return -EFAULT; + } + *lenout = l; /* then put the rest (if any) at the beginning of the buffer */ - return copy_from_user(fifo->buffer, from + l, len - l); + ret = copy_from_user(fifo->buffer, from + l, len - l); + *lenout += ret ? ret : len - l; + return ret ? -EFAULT : 0; } -static inline unsigned int __kfifo_to_user_data(struct kfifo *fifo, - void __user *to, unsigned int len, unsigned int off) +static inline int __kfifo_to_user_data(struct kfifo *fifo, + void __user *to, unsigned int len, unsigned int off, unsigned *lenout) { unsigned int l; int ret; @@ -203,12 +208,21 @@ static inline unsigned int __kfifo_to_user_data(struct kfifo *fifo, /* first get the data from fifo->out until the end of the buffer */ l = min(len, fifo->size - off); ret = copy_to_user(to, fifo->buffer + off, l); - - if (unlikely(ret)) - return ret + len - l; + *lenout = l; + if (unlikely(ret)) { + *lenout -= ret; + return -EFAULT; + } /* then get the rest (if any) from the beginning of the buffer */ - return copy_to_user(to + l, fifo->buffer, len - l); + len -= l; + ret = copy_to_user(to + l, fifo->buffer, len); + if (unlikely(ret)) { + *lenout += len - ret; + return -EFAULT; + } + *lenout += len; + return 0; } unsigned int __kfifo_in_n(struct kfifo *fifo, @@ -299,10 +313,13 @@ EXPORT_SYMBOL(__kfifo_out_generic); unsigned int __kfifo_from_user_n(struct kfifo *fifo, const void __user *from, unsigned int len, unsigned int recsize) { + unsigned total; + if (kfifo_avail(fifo) < len + recsize) return len + 1; - return __kfifo_from_user_data(fifo, from, len, recsize); + __kfifo_from_user_data(fifo, from, len, recsize, &total); + return total; } EXPORT_SYMBOL(__kfifo_from_user_n); @@ -313,18 +330,21 @@ EXPORT_SYMBOL(__kfifo_from_user_n); * @len: the length of the data to be added. * * This function copies at most @len bytes from the @from into the - * FIFO depending and returns the number of copied bytes. + * FIFO depending and returns -EFAULT/0. * * Note that with only one concurrent reader and one concurrent * writer, you don't need extra locking to use these functions. */ -unsigned int kfifo_from_user(struct kfifo *fifo, - const void __user *from, unsigned int len) +int kfifo_from_user(struct kfifo *fifo, + const void __user *from, unsigned int len, unsigned *total) { + int ret; len = min(kfifo_avail(fifo), len); - len -= __kfifo_from_user_data(fifo, from, len, 0); + ret = __kfifo_from_user_data(fifo, from, len, 0, total); + if (ret) + return ret; __kfifo_add_in(fifo, len); - return len; + return 0; } EXPORT_SYMBOL(kfifo_from_user); @@ -339,17 +359,17 @@ unsigned int __kfifo_to_user_n(struct kfifo *fifo, void __user *to, unsigned int len, unsigned int reclen, unsigned int recsize) { - unsigned int ret; + unsigned int ret, total; if (kfifo_len(fifo) < reclen + recsize) return len; - ret = __kfifo_to_user_data(fifo, to, reclen, recsize); + ret = __kfifo_to_user_data(fifo, to, reclen, recsize, &total); if (likely(ret == 0)) __kfifo_add_out(fifo, reclen + recsize); - return ret; + return total; } EXPORT_SYMBOL(__kfifo_to_user_n); @@ -358,20 +378,22 @@ EXPORT_SYMBOL(__kfifo_to_user_n); * @fifo: the fifo to be used. * @to: where the data must be copied. * @len: the size of the destination buffer. + @ @lenout: pointer to output variable with copied data * * This function copies at most @len bytes from the FIFO into the - * @to buffer and returns the number of copied bytes. + * @to buffer and 0 or -EFAULT. * * Note that with only one concurrent reader and one concurrent * writer, you don't need extra locking to use these functions. */ -unsigned int kfifo_to_user(struct kfifo *fifo, - void __user *to, unsigned int len) +int kfifo_to_user(struct kfifo *fifo, + void __user *to, unsigned int len, unsigned *lenout) { + int ret; len = min(kfifo_len(fifo), len); - len -= __kfifo_to_user_data(fifo, to, len, 0); - __kfifo_add_out(fifo, len); - return len; + ret = __kfifo_to_user_data(fifo, to, len, 0, lenout); + __kfifo_add_out(fifo, *lenout); + return ret; } EXPORT_SYMBOL(kfifo_to_user); From a5b9e2c1063046421ce01dcf5ddd7ec12567f3e1 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 15 Jan 2010 17:01:16 -0800 Subject: [PATCH 0973/1626] kfifo: add kfifo_out_peek In some upcoming code it's useful to peek into a FIFO without permanentely removing data. This patch implements a new kfifo_out_peek() to do this. Signed-off-by: Andi Kleen Acked-by: Stefani Seibold Cc: Roland Dreier Cc: Dmitry Torokhov Cc: Andy Walls Cc: Vikram Dhillon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kfifo.h | 3 +++ kernel/kfifo.c | 21 +++++++++++++++++++++ 2 files changed, 24 insertions(+) diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index 86ad50a900c8..7ad6d32dd673 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -113,6 +113,9 @@ extern unsigned int kfifo_in(struct kfifo *fifo, const void *from, unsigned int len); extern __must_check unsigned int kfifo_out(struct kfifo *fifo, void *to, unsigned int len); +extern __must_check unsigned int kfifo_out_peek(struct kfifo *fifo, + void *to, unsigned int len, unsigned offset); + /** * kfifo_reset - removes the entire FIFO contents diff --git a/kernel/kfifo.c b/kernel/kfifo.c index b50bb622e8b0..7384f120be87 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -302,6 +302,27 @@ unsigned int kfifo_out(struct kfifo *fifo, void *to, unsigned int len) } EXPORT_SYMBOL(kfifo_out); +/** + * kfifo_out_peek - copy some data from the FIFO, but do not remove it + * @fifo: the fifo to be used. + * @to: where the data must be copied. + * @len: the size of the destination buffer. + * @offset: offset into the fifo + * + * This function copies at most @len bytes at @offset from the FIFO + * into the @to buffer and returns the number of copied bytes. + * The data is not removed from the FIFO. + */ +unsigned int kfifo_out_peek(struct kfifo *fifo, void *to, unsigned int len, + unsigned offset) +{ + len = min(kfifo_len(fifo), len + offset); + + __kfifo_out_data(fifo, to, len, offset); + return len; +} +EXPORT_SYMBOL(kfifo_out_peek); + unsigned int __kfifo_out_generic(struct kfifo *fifo, void *to, unsigned int len, unsigned int recsize, unsigned int *total) From d994ffc247f7c4a48b848f10c4c01c9b06411ada Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 15 Jan 2010 17:01:17 -0800 Subject: [PATCH 0974/1626] kfifo: add kfifo_initialized Simple inline that checks if kfifo_init() has been executed on a fifo. This is useful for walking all per CPU fifos, when some of them might not have been brought up yet. Signed-off-by: Andi Kleen Acked-by: Stefani Seibold Cc: Roland Dreier Cc: Dmitry Torokhov Cc: Andy Walls Cc: Vikram Dhillon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kfifo.h | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index 7ad6d32dd673..c8618243ca5a 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -116,6 +116,16 @@ extern __must_check unsigned int kfifo_out(struct kfifo *fifo, extern __must_check unsigned int kfifo_out_peek(struct kfifo *fifo, void *to, unsigned int len, unsigned offset); +/** + * kfifo_initialized - Check if kfifo is initialized. + * @fifo: fifo to check + * Return %true if FIFO is initialized, otherwise %false. + * Assumes the fifo was 0 before. + */ +static inline bool kfifo_initialized(struct kfifo *fifo) +{ + return fifo->buffer != 0; +} /** * kfifo_reset - removes the entire FIFO contents From 5dab600e6a153ceb64832f608069e6c08185411a Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 15 Jan 2010 17:01:17 -0800 Subject: [PATCH 0975/1626] kfifo: document everywhere that size has to be power of two On my first try using them I missed that the fifos need to be power of two, resulting in a runtime bug. Document that requirement everywhere (and fix one grammar bug) Signed-off-by: Andi Kleen Acked-by: Stefani Seibold Cc: Roland Dreier Cc: Dmitry Torokhov Cc: Andy Walls Cc: Vikram Dhillon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kfifo.h | 4 ++-- kernel/kfifo.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index c8618243ca5a..6f6c5f300af6 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -67,7 +67,7 @@ struct kfifo { /** * DECLARE_KFIFO - macro to declare a kfifo and the associated buffer * @name: name of the declared kfifo datatype - * @size: size of the fifo buffer + * @size: size of the fifo buffer. Must be a power of two. * * Note1: the macro can be used inside struct or union declaration * Note2: the macro creates two objects: @@ -91,7 +91,7 @@ union { \ /** * DEFINE_KFIFO - macro to define and initialize a kfifo * @name: name of the declared kfifo datatype - * @size: size of the fifo buffer + * @size: size of the fifo buffer. Must be a power of two. * * Note1: the macro can be used for global and local kfifo data type variables * Note2: the macro creates two objects: diff --git a/kernel/kfifo.c b/kernel/kfifo.c index 7384f120be87..32c5c15d750d 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -41,7 +41,7 @@ static void _kfifo_init(struct kfifo *fifo, void *buffer, * kfifo_init - initialize a FIFO using a preallocated buffer * @fifo: the fifo to assign the buffer * @buffer: the preallocated buffer to be used. - * @size: the size of the internal buffer, this have to be a power of 2. + * @size: the size of the internal buffer, this has to be a power of 2. * */ void kfifo_init(struct kfifo *fifo, void *buffer, unsigned int size) From d2dbe08ddceb4ba2b274abb84326d7e69d454e5c Mon Sep 17 00:00:00 2001 From: Kazuhisa Ichikawa Date: Fri, 15 Jan 2010 17:01:20 -0800 Subject: [PATCH 0976/1626] mm/page_alloc: fix the range check for backward merging The current check for 'backward merging' within add_active_range() does not seem correct. start_pfn must be compared against early_node_map[i].start_pfn (and NOT against .end_pfn) to find out whether the new region is backward-mergeable with the existing range. Signed-off-by: Kazuhisa Ichikawa Acked-by: David Rientjes Cc: KOSAKI Motohiro Cc: Mel Gorman Cc: Christoph Lameter Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 4e9f5cc5fb59..6ea4966a6334 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3998,7 +3998,7 @@ void __init add_active_range(unsigned int nid, unsigned long start_pfn, } /* Merge backward if suitable */ - if (start_pfn < early_node_map[i].end_pfn && + if (start_pfn < early_node_map[i].start_pfn && end_pfn >= early_node_map[i].start_pfn) { early_node_map[i].start_pfn = start_pfn; return; From cc8ef6eb21e964b1c5eb97b2d0e8ac9893e1bf86 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 15 Jan 2010 17:01:22 -0800 Subject: [PATCH 0977/1626] kernel.h: add BUILD_BUG_ON_NOT_POWER_OF_2() Add BUILD_BUG_ON_NOT_POWER_OF_2() When code relies on a constant being a power of 2: #define FOO 512 /* must be a power of 2 */ it would be nice to be able to do: BUILD_BUG_ON(!is_power_of_2(FOO)); However applying an inline function does not result in a compile-time constant that can be used with BUILD_BUG_ON(), so trying that gives results in: error: bit-field '' width not an integer constant As suggested by akpm, rather than monkeying around with is_power_of_2() and risking gcc warts about constant expressions, just create a macro BUILD_BUG_ON_NOT_POWER_OF_2() to encapsulate this common requirement. Signed-off-by: Roland Dreier Cc: Bart Van Assche Cc: David Dillow Cc: "Robert P. J. Day" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 3fc9f5aab5f8..328bca609b9b 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -734,6 +734,10 @@ struct sysinfo { /* Force a compilation error if condition is constant and true */ #define MAYBE_BUILD_BUG_ON(cond) ((void)sizeof(char[1 - 2 * !!(cond)])) +/* Force a compilation error if a constant expression is not a power of 2 */ +#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \ + BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0)) + /* Force a compilation error if condition is true, but also produce a result (of value 0 and type size_t), so the expression can be used e.g. in a structure initializer (or where-ever else comma expressions From af2422c42c0ff42b8b93dbb3a5fe65250fb65c40 Mon Sep 17 00:00:00 2001 From: David John Date: Fri, 15 Jan 2010 17:01:23 -0800 Subject: [PATCH 0978/1626] smp_call_function_any(): pass the node value to cpumask_of_node() The change in acpi_cpufreq to use smp_call_function_any causes a warning when it is called since the function erroneously passes the cpu id to cpumask_of_node rather than the node that the cpu is on. Fix this. cpumask_of_node(3): node > nr_node_ids(1) Pid: 1, comm: swapper Not tainted 2.6.33-rc3-00097-g2c1f189 #223 Call Trace: [] cpumask_of_node+0x23/0x58 [] smp_call_function_any+0x65/0xfa [] ? do_drv_read+0x0/0x2f [] get_cur_val+0xb0/0x102 [] get_cur_freq_on_cpu+0x74/0xc5 [] acpi_cpufreq_cpu_init+0x417/0x515 [] ? __down_write+0xb/0xd [] cpufreq_add_dev+0x278/0x922 Signed-off-by: David John Cc: Suresh Siddha Cc: Rusty Russell Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/smp.c b/kernel/smp.c index de735a6637d0..f10408422444 100644 --- a/kernel/smp.c +++ b/kernel/smp.c @@ -347,7 +347,7 @@ int smp_call_function_any(const struct cpumask *mask, goto call; /* Try for same node. */ - nodemask = cpumask_of_node(cpu); + nodemask = cpumask_of_node(cpu_to_node(cpu)); for (cpu = cpumask_first_and(nodemask, mask); cpu < nr_cpu_ids; cpu = cpumask_next_and(cpu, nodemask, mask)) { if (cpu_online(cpu)) From de3fab39348dff18c69a0cd04efee9c276a02f51 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Fri, 15 Jan 2010 17:01:25 -0800 Subject: [PATCH 0979/1626] vmscan: kswapd: don't retry balance_pgdat() if all zones are unreclaimable Commit f50de2d3 (vmscan: have kswapd sleep for a short interval and double check it should be asleep) can cause kswapd to enter an infinite loop if running on a single-CPU system. If all zones are unreclaimble, sleeping_prematurely return 1 and kswapd will call balance_pgdat() again. but it's totally meaningless, balance_pgdat() doesn't anything against unreclaimable zone! Signed-off-by: KOSAKI Motohiro Cc: Mel Gorman Reported-by: Will Newton Reviewed-by: Minchan Kim Reviewed-by: Rik van Riel Tested-by: Will Newton Reviewed-by: Wu Fengguang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/vmscan.c b/mm/vmscan.c index 885207a6b6b7..c26986c85ce0 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1922,6 +1922,9 @@ static int sleeping_prematurely(pg_data_t *pgdat, int order, long remaining) if (!populated_zone(zone)) continue; + if (zone_is_all_unreclaimable(zone)) + continue; + if (!zone_watermark_ok(zone, order, high_wmark_pages(zone), 0, 0)) return 1; From d817cd525589765aa5f6798734e422c867685a58 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 15 Jan 2010 17:01:26 -0800 Subject: [PATCH 0980/1626] virtio: fix section mismatch warnings Fix fixes the following warnings by renaming the driver structures to be suffixed with _driver. WARNING: drivers/virtio/virtio_balloon.o(.data+0x88): Section mismatch in reference from the variable virtio_balloon to the function .devexit.text:virtballoon_remove() WARNING: drivers/char/hw_random/virtio-rng.o(.data+0x88): Section mismatch in reference from the variable virtio_rng to the function .devexit.text:virtrng_remove() Signed-off-by: Jeff Mahoney Acked-by: Rusty Russell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/hw_random/virtio-rng.c | 6 +++--- drivers/virtio/virtio_balloon.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c index bdaef8e94021..64fe0a793efd 100644 --- a/drivers/char/hw_random/virtio-rng.c +++ b/drivers/char/hw_random/virtio-rng.c @@ -114,7 +114,7 @@ static struct virtio_device_id id_table[] = { { 0 }, }; -static struct virtio_driver virtio_rng = { +static struct virtio_driver virtio_rng_driver = { .driver.name = KBUILD_MODNAME, .driver.owner = THIS_MODULE, .id_table = id_table, @@ -124,12 +124,12 @@ static struct virtio_driver virtio_rng = { static int __init init(void) { - return register_virtio_driver(&virtio_rng); + return register_virtio_driver(&virtio_rng_driver); } static void __exit fini(void) { - unregister_virtio_driver(&virtio_rng); + unregister_virtio_driver(&virtio_rng_driver); } module_init(init); module_exit(fini); diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 9dd588042880..505be88c82ae 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -266,7 +266,7 @@ static void __devexit virtballoon_remove(struct virtio_device *vdev) static unsigned int features[] = { VIRTIO_BALLOON_F_MUST_TELL_HOST }; -static struct virtio_driver virtio_balloon = { +static struct virtio_driver virtio_balloon_driver = { .feature_table = features, .feature_table_size = ARRAY_SIZE(features), .driver.name = KBUILD_MODNAME, @@ -279,12 +279,12 @@ static struct virtio_driver virtio_balloon = { static int __init init(void) { - return register_virtio_driver(&virtio_balloon); + return register_virtio_driver(&virtio_balloon_driver); } static void __exit fini(void) { - unregister_virtio_driver(&virtio_balloon); + unregister_virtio_driver(&virtio_balloon_driver); } module_init(init); module_exit(fini); From fce66477578d081f19aef5ea218664ff7758c33a Mon Sep 17 00:00:00 2001 From: Daisuke Nishimura Date: Fri, 15 Jan 2010 17:01:30 -0800 Subject: [PATCH 0981/1626] memcg: ensure list is empty at rmdir Current mem_cgroup_force_empty() only ensures mem->res.usage == 0 on success. But this doesn't guarantee memcg's LRU is really empty, because there are some cases in which !PageCgrupUsed pages exist on memcg's LRU. For example: - Pages can be uncharged by its owner process while they are on LRU. - race between mem_cgroup_add_lru_list() and __mem_cgroup_uncharge_common(). So there can be a case in which the usage is zero but some of the LRUs are not empty. OTOH, mem_cgroup_del_lru_list(), which can be called asynchronously with rmdir, accesses the mem_cgroup, so this access can cause a problem if it races with rmdir because the mem_cgroup might have been freed by rmdir. Actually, I saw a bug which seems to be caused by this race. [1530745.949906] BUG: unable to handle kernel NULL pointer dereference at 0000000000000230 [1530745.950651] IP: [] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] PGD 3863de067 PUD 3862c7067 PMD 0 [1530745.950651] Oops: 0002 [#1] SMP [1530745.950651] last sysfs file: /sys/devices/system/cpu/cpu7/cache/index1/shared_cpu_map [1530745.950651] CPU 3 [1530745.950651] Modules linked in: configs ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp nfsd nfs_acl auth_rpcgss exportfs autofs4 hidp rfcomm l2cap crc16 bluetooth lockd sunrpc ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_multipath scsi_dh video output sbs sbshc battery ac lp kvm_intel kvm sg ide_cd_mod cdrom serio_raw tpm_tis tpm tpm_bios acpi_memhotplug button parport_pc parport rtc_cmos rtc_core rtc_lib e1000 i2c_i801 i2c_core pcspkr dm_region_hash dm_log dm_mod ata_piix libata shpchp megaraid_mbox sd_mod scsi_mod megaraid_mm ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table] [1530745.950651] Pid: 19653, comm: shmem_test_02 Tainted: G M 2.6.32-mm1-00701-g2b04386 #3 Express5800/140Rd-4 [N8100-1065] [1530745.950651] RIP: 0010:[] [] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] RSP: 0018:ffff8803863ddcb8 EFLAGS: 00010002 [1530745.950651] RAX: 00000000000001e0 RBX: ffff8803abc02238 RCX: 00000000000001e0 [1530745.950651] RDX: 0000000000000000 RSI: ffff88038611a000 RDI: ffff8803abc02238 [1530745.950651] RBP: ffff8803863ddcc8 R08: 0000000000000002 R09: ffff8803a04c8643 [1530745.950651] R10: 0000000000000000 R11: ffffffff810c7333 R12: 0000000000000000 [1530745.950651] R13: ffff880000017f00 R14: 0000000000000092 R15: ffff8800179d0310 [1530745.950651] FS: 0000000000000000(0000) GS:ffff880017800000(0000) knlGS:0000000000000000 [1530745.950651] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [1530745.950651] CR2: 0000000000000230 CR3: 0000000379d87000 CR4: 00000000000006e0 [1530745.950651] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1530745.950651] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [1530745.950651] Process shmem_test_02 (pid: 19653, threadinfo ffff8803863dc000, task ffff88038612a8a0) [1530745.950651] Stack: [1530745.950651] ffffea00040c2fe8 0000000000000000 ffff8803863ddd98 ffffffff810c739a [1530745.950651] <0> 00000000863ddd18 000000000000000c 0000000000000000 0000000000000000 [1530745.950651] <0> 0000000000000002 0000000000000000 ffff8803863ddd68 0000000000000046 [1530745.950651] Call Trace: [1530745.950651] [] release_pages+0x142/0x1e7 [1530745.950651] [] ? pagevec_move_tail+0x6e/0x112 [1530745.950651] [] pagevec_move_tail+0xfd/0x112 [1530745.950651] [] lru_add_drain+0x76/0x94 [1530745.950651] [] exit_mmap+0x6e/0x145 [1530745.950651] [] mmput+0x5e/0xcf [1530745.950651] [] exit_mm+0x11c/0x129 [1530745.950651] [] ? audit_free+0x196/0x1c9 [1530745.950651] [] do_exit+0x1f5/0x6b7 [1530745.950651] [] ? up_read+0x2b/0x2f [1530745.950651] [] ? lockdep_sys_exit_thunk+0x35/0x67 [1530745.950651] [] do_group_exit+0x83/0xb0 [1530745.950651] [] sys_exit_group+0x17/0x1b [1530745.950651] [] system_call_fastpath+0x16/0x1b [1530745.950651] Code: 54 53 0f 1f 44 00 00 83 3d cc 29 7c 00 00 41 89 f4 75 63 eb 4e 48 83 7b 08 00 75 04 0f 0b eb fe 48 89 df e8 18 f3 ff ff 44 89 e2 <48> ff 4c d0 50 48 8b 05 2b 2d 7c 00 48 39 43 08 74 39 48 8b 4b [1530745.950651] RIP [] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] RSP [1530745.950651] CR2: 0000000000000230 [1530745.950651] ---[ end trace c3419c1bb8acc34f ]--- [1530745.950651] Fixing recursive fault but reboot is needed! The problem here is pages on LRU may contain pointer to stale memcg. To make res->usage to be 0, all pages on memcg must be uncharged or moved to another(parent) memcg. Moved page_cgroup have already removed from original LRU, but uncharged page_cgroup contains pointer to memcg withou PCG_USED bit. (This asynchronous LRU work is for improving performance.) If PCG_USED bit is not set, page_cgroup will never be added to memcg's LRU. So, about pages not on LRU, they never access stale pointer. Then, what we have to take care of is page_cgroup _on_ LRU list. This patch fixes this problem by making mem_cgroup_force_empty() visit all LRUs before exiting its loop and guarantee there are no pages on its LRU. Signed-off-by: Daisuke Nishimura Acked-by: KAMEZAWA Hiroyuki Cc: Balbir Singh Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 488b644e0e8e..954032b80bed 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -2586,7 +2586,7 @@ static int mem_cgroup_force_empty(struct mem_cgroup *mem, bool free_all) if (free_all) goto try_to_free; move_account: - while (mem->res.usage > 0) { + do { ret = -EBUSY; if (cgroup_task_count(cgrp) || !list_empty(&cgrp->children)) goto out; @@ -2614,8 +2614,8 @@ move_account: if (ret == -ENOMEM) goto try_to_free; cond_resched(); - } - ret = 0; + /* "ret" should also be checked to ensure all lists are empty. */ + } while (mem->res.usage > 0 || ret); out: css_put(&mem->css); return ret; @@ -2648,10 +2648,7 @@ try_to_free: } lru_add_drain(); /* try move_account...there may be some *locked* pages. */ - if (mem->res.usage) - goto move_account; - ret = 0; - goto out; + goto move_account; } int mem_cgroup_force_empty_write(struct cgroup *cont, unsigned int event) From ba168fc37dea145deeb8fa9e7e71c748d2e00d74 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 15 Jan 2010 17:01:31 -0800 Subject: [PATCH 0982/1626] memory-hotplug: add 0x prefix to HEX block_size_bytes Signed-off-by: Wu Fengguang Cc: Andi Kleen Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/base/memory.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/memory.c b/drivers/base/memory.c index d7d77d4a402c..bd025059711f 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -311,7 +311,7 @@ static SYSDEV_ATTR(removable, 0444, show_mem_removable, NULL); static ssize_t print_block_size(struct class *class, char *buf) { - return sprintf(buf, "%lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE); + return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE); } static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL); From 8ff410daa009c4b44be445ded5b0cec00abc0426 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 15 Jan 2010 17:01:32 -0800 Subject: [PATCH 0983/1626] sysdev: fix prototype for memory_sysdev_class show/store functions The function prototype mismatches in call stack: [] print_block_size+0x58/0x60 [] sysdev_class_show+0x1f/0x30 [] sysfs_read_file+0xcb/0x1f0 [] vfs_read+0xc8/0x180 Due to prototype mismatch, print_block_size() will sprintf() into *attribute instead of *buf, hence user space will read the initial zeros from *buf: $ hexdump /sys/devices/system/memory/block_size_bytes 0000000 0000 0000 0000 0000 0000008 After patch: cat /sys/devices/system/memory/block_size_bytes 0x8000000 This complements commits c29af9636 and 4a0b2b4dbe. Signed-off-by: Wu Fengguang Cc: Andi Kleen Cc: Greg Kroah-Hartman Cc: "Zheng, Shaohui" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/base/memory.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/drivers/base/memory.c b/drivers/base/memory.c index bd025059711f..ae6b6c43cff9 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -309,17 +309,19 @@ static SYSDEV_ATTR(removable, 0444, show_mem_removable, NULL); * Block size attribute stuff */ static ssize_t -print_block_size(struct class *class, char *buf) +print_block_size(struct sysdev_class *class, + struct sysdev_class_attribute *class_attr, + char *buf) { return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE); } -static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL); +static SYSDEV_CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL); static int block_size_init(void) { return sysfs_create_file(&memory_sysdev_class.kset.kobj, - &class_attr_block_size_bytes.attr); + &attr_block_size_bytes.attr); } /* @@ -330,7 +332,9 @@ static int block_size_init(void) */ #ifdef CONFIG_ARCH_MEMORY_PROBE static ssize_t -memory_probe_store(struct class *class, const char *buf, size_t count) +memory_probe_store(struct sysdev_class *class, + struct sysdev_class_attribute *class_attr, + const char *buf, size_t count) { u64 phys_addr; int nid; @@ -346,12 +350,12 @@ memory_probe_store(struct class *class, const char *buf, size_t count) return count; } -static CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store); +static SYSDEV_CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store); static int memory_probe_init(void) { return sysfs_create_file(&memory_sysdev_class.kset.kobj, - &class_attr_probe.attr); + &attr_probe.attr); } #else static inline int memory_probe_init(void) @@ -367,7 +371,9 @@ static inline int memory_probe_init(void) /* Soft offline a page */ static ssize_t -store_soft_offline_page(struct class *class, const char *buf, size_t count) +store_soft_offline_page(struct sysdev_class *class, + struct sysdev_class_attribute *class_attr, + const char *buf, size_t count) { int ret; u64 pfn; @@ -384,7 +390,9 @@ store_soft_offline_page(struct class *class, const char *buf, size_t count) /* Forcibly offline a page, including killing processes. */ static ssize_t -store_hard_offline_page(struct class *class, const char *buf, size_t count) +store_hard_offline_page(struct sysdev_class *class, + struct sysdev_class_attribute *class_attr, + const char *buf, size_t count) { int ret; u64 pfn; @@ -397,18 +405,18 @@ store_hard_offline_page(struct class *class, const char *buf, size_t count) return ret ? ret : count; } -static CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page); -static CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page); +static SYSDEV_CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page); +static SYSDEV_CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page); static __init int memory_fail_init(void) { int err; err = sysfs_create_file(&memory_sysdev_class.kset.kobj, - &class_attr_soft_offline_page.attr); + &attr_soft_offline_page.attr); if (!err) err = sysfs_create_file(&memory_sysdev_class.kset.kobj, - &class_attr_hard_offline_page.attr); + &attr_hard_offline_page.attr); return err; } #else From ed5e5894b234ce4793d78078c026915b853e0678 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 15 Jan 2010 17:01:32 -0800 Subject: [PATCH 0984/1626] nommu: fix SYSV SHM for NOMMU Commit c4caa778157dbbf04116f0ac2111e389b5cd7a29 ("file ->get_unmapped_area() shouldn't duplicate work of get_unmapped_area()") broke SYSV SHM for NOMMU by taking away the pointer to shm_get_unmapped_area() from shm_file_operations. Put it back conditionally on CONFIG_MMU=n. file->f_ops->get_unmapped_area() is used to find out the base address for a mapping of a mappable chardev device or mappable memory-based file (such as a ramfs file). It needs to be called prior to file->f_ops->mmap() being called. Signed-off-by: David Howells Acked-by: Al Viro Cc: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- ipc/shm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/ipc/shm.c b/ipc/shm.c index 92fe9236258b..23256b855819 100644 --- a/ipc/shm.c +++ b/ipc/shm.c @@ -298,6 +298,9 @@ static const struct file_operations shm_file_operations = { .mmap = shm_mmap, .fsync = shm_fsync, .release = shm_release, +#ifndef CONFIG_MMU + .get_unmapped_area = shm_get_unmapped_area, +#endif }; static const struct file_operations shm_file_operations_huge = { From 1e2ae599d37e60958c03ca5e46b1f657619a30cd Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 15 Jan 2010 17:01:33 -0800 Subject: [PATCH 0985/1626] nommu: struct vm_region's vm_usage count need not be atomic The vm_usage count field in struct vm_region does not need to be atomic as it's only even modified whilst nommu_region_sem is write locked. Signed-off-by: David Howells Acked-by: Al Viro Cc: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm_types.h | 2 +- mm/nommu.c | 14 +++++++------- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 84d020bed083..80cfa78a8cf6 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -122,7 +122,7 @@ struct vm_region { unsigned long vm_pgoff; /* the offset in vm_file corresponding to vm_start */ struct file *vm_file; /* the backing file or NULL */ - atomic_t vm_usage; /* region usage count */ + int vm_usage; /* region usage count (access under nommu_region_sem) */ bool vm_icache_flushed : 1; /* true if the icache has been flushed for * this region */ }; diff --git a/mm/nommu.c b/mm/nommu.c index 17773862619b..5e39294f8ea8 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -552,11 +552,11 @@ static void free_page_series(unsigned long from, unsigned long to) static void __put_nommu_region(struct vm_region *region) __releases(nommu_region_sem) { - kenter("%p{%d}", region, atomic_read(®ion->vm_usage)); + kenter("%p{%d}", region, region->vm_usage); BUG_ON(!nommu_region_tree.rb_node); - if (atomic_dec_and_test(®ion->vm_usage)) { + if (--region->vm_usage == 0) { if (region->vm_top > region->vm_start) delete_nommu_region(region); up_write(&nommu_region_sem); @@ -1205,7 +1205,7 @@ unsigned long do_mmap_pgoff(struct file *file, if (!vma) goto error_getting_vma; - atomic_set(®ion->vm_usage, 1); + region->vm_usage = 1; region->vm_flags = vm_flags; region->vm_pgoff = pgoff; @@ -1272,7 +1272,7 @@ unsigned long do_mmap_pgoff(struct file *file, } /* we've found a region we can share */ - atomic_inc(&pregion->vm_usage); + pregion->vm_usage++; vma->vm_region = pregion; start = pregion->vm_start; start += (pgoff - pregion->vm_pgoff) << PAGE_SHIFT; @@ -1289,7 +1289,7 @@ unsigned long do_mmap_pgoff(struct file *file, vma->vm_region = NULL; vma->vm_start = 0; vma->vm_end = 0; - atomic_dec(&pregion->vm_usage); + pregion->vm_usage--; pregion = NULL; goto error_just_free; } @@ -1444,7 +1444,7 @@ int split_vma(struct mm_struct *mm, struct vm_area_struct *vma, /* we're only permitted to split anonymous regions that have a single * owner */ if (vma->vm_file || - atomic_read(&vma->vm_region->vm_usage) != 1) + vma->vm_region->vm_usage != 1) return -ENOMEM; if (mm->map_count >= sysctl_max_map_count) @@ -1518,7 +1518,7 @@ static int shrink_vma(struct mm_struct *mm, /* cut the backing region down to size */ region = vma->vm_region; - BUG_ON(atomic_read(®ion->vm_usage) != 1); + BUG_ON(region->vm_usage != 1); down_write(&nommu_region_sem); delete_nommu_region(region); From 779c10232ceb11c1b259232c4845cfb2850287b7 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 15 Jan 2010 17:01:34 -0800 Subject: [PATCH 0986/1626] nommu: remove a superfluous check of vm_region::vm_usage In split_vma(), there's no need to check if the VMA being split has a region that's in use by more than one VMA because: (1) The preceding test prohibits splitting of non-anonymous VMAs and regions (eg: file or chardev backed VMAs). (2) Anonymous regions can't be mapped multiple times because there's no handle by which to refer to the already existing region. (3) If a VMA has previously been split, then the region backing it has also been split into two regions, each of usage 1. Signed-off-by: David Howells Acked-by: Al Viro Cc: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/nommu.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/mm/nommu.c b/mm/nommu.c index 5e39294f8ea8..d6dd656264a2 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1441,10 +1441,9 @@ int split_vma(struct mm_struct *mm, struct vm_area_struct *vma, kenter(""); - /* we're only permitted to split anonymous regions that have a single - * owner */ - if (vma->vm_file || - vma->vm_region->vm_usage != 1) + /* we're only permitted to split anonymous regions (these should have + * only a single usage on the region) */ + if (vma->vm_file) return -ENOMEM; if (mm->map_count >= sysctl_max_map_count) From efc1a3b16930c41d64ffefde16b87d82f603a8a0 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 15 Jan 2010 17:01:35 -0800 Subject: [PATCH 0987/1626] nommu: don't need get_unmapped_area() for NOMMU get_unmapped_area() is unnecessary for NOMMU as no-one calls it. Signed-off-by: David Howells Acked-by: Al Viro Cc: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm_types.h | 2 ++ include/linux/sched.h | 7 +++++-- mm/nommu.c | 21 --------------------- mm/util.c | 2 +- 4 files changed, 8 insertions(+), 24 deletions(-) diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 80cfa78a8cf6..36f96271306c 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -205,10 +205,12 @@ struct mm_struct { struct vm_area_struct * mmap; /* list of VMAs */ struct rb_root mm_rb; struct vm_area_struct * mmap_cache; /* last find_vma result */ +#ifdef CONFIG_MMU unsigned long (*get_unmapped_area) (struct file *filp, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags); void (*unmap_area) (struct mm_struct *mm, unsigned long addr); +#endif unsigned long mmap_base; /* base of mmap area */ unsigned long task_size; /* size of task vm space */ unsigned long cached_hole_size; /* if non-zero, the largest hole below free_area_cache */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 8d4991be9d53..6f7bba93929b 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -377,6 +377,8 @@ extern int sysctl_max_map_count; #include +#ifdef CONFIG_MMU +extern void arch_pick_mmap_layout(struct mm_struct *mm); extern unsigned long arch_get_unmapped_area(struct file *, unsigned long, unsigned long, unsigned long, unsigned long); @@ -386,6 +388,9 @@ arch_get_unmapped_area_topdown(struct file *filp, unsigned long addr, unsigned long flags); extern void arch_unmap_area(struct mm_struct *, unsigned long); extern void arch_unmap_area_topdown(struct mm_struct *, unsigned long); +#else +static inline void arch_pick_mmap_layout(struct mm_struct *mm) {} +#endif #if USE_SPLIT_PTLOCKS /* @@ -2491,8 +2496,6 @@ static inline void set_task_cpu(struct task_struct *p, unsigned int cpu) #endif /* CONFIG_SMP */ -extern void arch_pick_mmap_layout(struct mm_struct *mm); - #ifdef CONFIG_TRACING extern void __trace_special(void *__tr, void *__data, diff --git a/mm/nommu.c b/mm/nommu.c index d6dd656264a2..32be0cf51ba6 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1760,27 +1760,6 @@ void unmap_mapping_range(struct address_space *mapping, } EXPORT_SYMBOL(unmap_mapping_range); -/* - * ask for an unmapped area at which to create a mapping on a file - */ -unsigned long get_unmapped_area(struct file *file, unsigned long addr, - unsigned long len, unsigned long pgoff, - unsigned long flags) -{ - unsigned long (*get_area)(struct file *, unsigned long, unsigned long, - unsigned long, unsigned long); - - get_area = current->mm->get_unmapped_area; - if (file && file->f_op && file->f_op->get_unmapped_area) - get_area = file->f_op->get_unmapped_area; - - if (!get_area) - return -ENOSYS; - - return get_area(file, addr, len, pgoff, flags); -} -EXPORT_SYMBOL(get_unmapped_area); - /* * Check that a process has enough memory to allocate a new virtual * mapping. 0 means there is enough memory for the allocation to diff --git a/mm/util.c b/mm/util.c index 7c35ad95f927..834db7be240f 100644 --- a/mm/util.c +++ b/mm/util.c @@ -220,7 +220,7 @@ char *strndup_user(const char __user *s, long n) } EXPORT_SYMBOL(strndup_user); -#ifndef HAVE_ARCH_PICK_MMAP_LAYOUT +#if defined(CONFIG_MMU) && !defined(HAVE_ARCH_PICK_MMAP_LAYOUT) void arch_pick_mmap_layout(struct mm_struct *mm) { mm->mmap_base = TASK_UNMAPPED_BASE; From 81759b5b221107488bda99fe7beeb7b734f61133 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 15 Jan 2010 17:01:36 -0800 Subject: [PATCH 0988/1626] nommu: fix race between ramfs truncation and shared mmap Fix the race between the truncation of a ramfs file and an attempt to make a shared mmap of region of that file. The problem is that do_mmap_pgoff() calls f_op->get_unmapped_area() to verify that the file region is made of contiguous pages and to find its base address - but there isn't any locking to guarantee this region until vma_prio_tree_insert() is called by add_vma_to_mm(). Note that moving the functionality into f_op->mmap() doesn't help as that is also called before vma_prio_tree_insert(). Instead make ramfs_nommu_check_mappings() grab nommu_region_sem whilst it does its checks. This means that this function will wait whilst mmaps take place. Signed-off-by: David Howells Acked-by: Al Viro Cc: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ramfs/file-nommu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c index 2efc57173fd7..266531343aae 100644 --- a/fs/ramfs/file-nommu.c +++ b/fs/ramfs/file-nommu.c @@ -131,6 +131,8 @@ static int ramfs_nommu_check_mappings(struct inode *inode, struct vm_area_struct *vma; struct prio_tree_iter iter; + down_write(&nommu_region_sem); + /* search for VMAs that fall within the dead zone */ vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap, newsize >> PAGE_SHIFT, @@ -138,10 +140,13 @@ static int ramfs_nommu_check_mappings(struct inode *inode, ) { /* found one - only interested if it's shared out of the page * cache */ - if (vma->vm_flags & VM_SHARED) + if (vma->vm_flags & VM_SHARED) { + up_write(&nommu_region_sem); return -ETXTBSY; /* not quite true, but near enough */ + } } + up_write(&nommu_region_sem); return 0; } From 7e6608724c640924aad1d556d17df33ebaa6124d Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 15 Jan 2010 17:01:39 -0800 Subject: [PATCH 0989/1626] nommu: fix shared mmap after truncate shrinkage problems Fix a problem in NOMMU mmap with ramfs whereby a shared mmap can happen over the end of a truncation. The problem is that ramfs_nommu_check_mappings() checks that the reduced file size against the VMA tree, but not the vm_region tree. The following sequence of events can cause the problem: fd = open("/tmp/x", O_RDWR|O_TRUNC|O_CREAT, 0600); ftruncate(fd, 32 * 1024); a = mmap(NULL, 32 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); b = mmap(NULL, 16 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); munmap(a, 32 * 1024); ftruncate(fd, 16 * 1024); c = mmap(NULL, 32 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); Mapping 'a' creates a vm_region covering 32KB of the file. Mapping 'b' sees that the vm_region from 'a' is covering the region it wants and so shares it, pinning it in memory. Mapping 'a' then goes away and the file is truncated to the end of VMA 'b'. However, the region allocated by 'a' is still in effect, and has _not_ been reduced. Mapping 'c' is then created, and because there's a vm_region covering the desired region, get_unmapped_area() is _not_ called to repeat the check, and the mapping is granted, even though the pages from the latter half of the mapping have been discarded. However: d = mmap(NULL, 16 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); Mapping 'd' should work, and should end up sharing the region allocated by 'a'. To deal with this, we shrink the vm_region struct during the truncation, lest do_mmap_pgoff() take it as licence to share the full region automatically without calling the get_unmapped_area() file op again. Signed-off-by: David Howells Acked-by: Al Viro Cc: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ramfs/file-nommu.c | 31 +--------------------- include/linux/mm.h | 1 + mm/nommu.c | 62 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 64 insertions(+), 30 deletions(-) diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c index 266531343aae..1739a4aba25f 100644 --- a/fs/ramfs/file-nommu.c +++ b/fs/ramfs/file-nommu.c @@ -121,35 +121,6 @@ add_error: return ret; } -/*****************************************************************************/ -/* - * check that file shrinkage doesn't leave any VMAs dangling in midair - */ -static int ramfs_nommu_check_mappings(struct inode *inode, - size_t newsize, size_t size) -{ - struct vm_area_struct *vma; - struct prio_tree_iter iter; - - down_write(&nommu_region_sem); - - /* search for VMAs that fall within the dead zone */ - vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap, - newsize >> PAGE_SHIFT, - (size + PAGE_SIZE - 1) >> PAGE_SHIFT - ) { - /* found one - only interested if it's shared out of the page - * cache */ - if (vma->vm_flags & VM_SHARED) { - up_write(&nommu_region_sem); - return -ETXTBSY; /* not quite true, but near enough */ - } - } - - up_write(&nommu_region_sem); - return 0; -} - /*****************************************************************************/ /* * @@ -169,7 +140,7 @@ static int ramfs_nommu_resize(struct inode *inode, loff_t newsize, loff_t size) /* check that a decrease in size doesn't cut off any shared mappings */ if (newsize < size) { - ret = ramfs_nommu_check_mappings(inode, newsize, size); + ret = nommu_shrink_inode_mappings(inode, size, newsize); if (ret < 0) return ret; } diff --git a/include/linux/mm.h b/include/linux/mm.h index 2265f28eb47a..60c467bfbabd 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1089,6 +1089,7 @@ extern void zone_pcp_update(struct zone *zone); /* nommu.c */ extern atomic_long_t mmap_pages_allocated; +extern int nommu_shrink_inode_mappings(struct inode *, size_t, size_t); /* prio_tree.c */ void vma_prio_tree_add(struct vm_area_struct *, struct vm_area_struct *old); diff --git a/mm/nommu.c b/mm/nommu.c index 32be0cf51ba6..48a2ecfaf059 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1914,3 +1914,65 @@ int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, in mmput(mm); return len; } + +/** + * nommu_shrink_inode_mappings - Shrink the shared mappings on an inode + * @inode: The inode to check + * @size: The current filesize of the inode + * @newsize: The proposed filesize of the inode + * + * Check the shared mappings on an inode on behalf of a shrinking truncate to + * make sure that that any outstanding VMAs aren't broken and then shrink the + * vm_regions that extend that beyond so that do_mmap_pgoff() doesn't + * automatically grant mappings that are too large. + */ +int nommu_shrink_inode_mappings(struct inode *inode, size_t size, + size_t newsize) +{ + struct vm_area_struct *vma; + struct prio_tree_iter iter; + struct vm_region *region; + pgoff_t low, high; + size_t r_size, r_top; + + low = newsize >> PAGE_SHIFT; + high = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; + + down_write(&nommu_region_sem); + + /* search for VMAs that fall within the dead zone */ + vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap, + low, high) { + /* found one - only interested if it's shared out of the page + * cache */ + if (vma->vm_flags & VM_SHARED) { + up_write(&nommu_region_sem); + return -ETXTBSY; /* not quite true, but near enough */ + } + } + + /* reduce any regions that overlap the dead zone - if in existence, + * these will be pointed to by VMAs that don't overlap the dead zone + * + * we don't check for any regions that start beyond the EOF as there + * shouldn't be any + */ + vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap, + 0, ULONG_MAX) { + if (!(vma->vm_flags & VM_SHARED)) + continue; + + region = vma->vm_region; + r_size = region->vm_top - region->vm_start; + r_top = (region->vm_pgoff << PAGE_SHIFT) + r_size; + + if (r_top > newsize) { + region->vm_top -= r_top - newsize; + if (region->vm_end > region->vm_top) + region->vm_end = region->vm_top; + } + } + + up_write(&nommu_region_sem); + return 0; +} From eb29a5cc0b601c458bae9df2f6c3696d75c2d383 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 15 Jan 2010 17:01:40 -0800 Subject: [PATCH 0990/1626] revert "drivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer" Fix divide by zero and broken output. Commit 600ce1a0fa ("fix clock setting for Samsung SoC Framebuffer") introduced a mandatory refresh parameter to the platform data for the S3C framebuffer but did not introduce any validation code, causing existing platforms (none of which have refresh set) to divide by zero whenever the framebuffer is configured, generating warnings and unusable output. Ben Dooks noted several problems with the patch: - The platform data supplies the pixclk directly and should already have taken care of the refresh rate. - The addition of a window ID parameter doesn't help since only the root framebuffer can control the pixclk. - pixclk is specified in picoseconds (rather than Hz) as the patch assumed. and suggests reverting the commit so do that. Without fixing this no mainline user of the driver will produce output. [akpm@linux-foundation.org: don't revert the correct bit] Signed-off-by: Mark Brown Cc: InKi Dae Cc: Kyungmin Park Cc: Krzysztof Helt Cc: Marek Szyprowski Cc: Ben Dooks Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/s3c-fb.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c index adf9632c6b1f..53cb722c45a0 100644 --- a/drivers/video/s3c-fb.c +++ b/drivers/video/s3c-fb.c @@ -211,21 +211,23 @@ static int s3c_fb_check_var(struct fb_var_screeninfo *var, /** * s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock. - * @id: window id. * @sfb: The hardware state. * @pixclock: The pixel clock wanted, in picoseconds. * * Given the specified pixel clock, work out the necessary divider to get * close to the output frequency. */ -static int s3c_fb_calc_pixclk(unsigned char id, struct s3c_fb *sfb, unsigned int pixclk) +static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk) { - struct s3c_fb_pd_win *win = sfb->pdata->win[id]; unsigned long clk = clk_get_rate(sfb->bus_clk); + unsigned long long tmp; unsigned int result; - pixclk *= win->win_mode.refresh; - result = clk / pixclk; + tmp = (unsigned long long)clk; + tmp *= pixclk; + + do_div(tmp, 1000000000UL); + result = (unsigned int)tmp / 1000; dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n", pixclk, clk, result, clk / result); @@ -301,7 +303,7 @@ static int s3c_fb_set_par(struct fb_info *info) /* use window 0 as the basis for the lcd output timings */ if (win_no == 0) { - clkdiv = s3c_fb_calc_pixclk(win_no, sfb, var->pixclock); + clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock); data = sfb->pdata->vidcon0; data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR); From c14973f93027500301fc40333e16ae49e58923a7 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 10 Jan 2010 00:15:44 -0800 Subject: [PATCH 0991/1626] sony-laptop - fix using of uninitialized variable CC [M] drivers/platform/x86/sony-laptop.o drivers/platform/x86/sony-laptop.c: In function 'sony_nc_rfkill_setup': drivers/platform/x86/sony-laptop.c:1162: warning: 'i' may be used uninitialized in this function Signed-off-by: Dmitry Torokhov Acked-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/platform/x86/sony-laptop.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 5af53340da6f..3f71a605a492 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -1201,9 +1201,12 @@ static void sony_nc_rfkill_setup(struct acpi_device *device) /* the buffer is filled with magic numbers describing the devices * available, 0xff terminates the enumeration */ - while ((dev_code = *(device_enum->buffer.pointer + i)) != 0xff && - i < device_enum->buffer.length) { - i++; + for (i = 0; i < device_enum->buffer.length; i++) { + + dev_code = *(device_enum->buffer.pointer + i); + if (dev_code == 0xff) + break; + dprintk("Radio devices, looking at 0x%.2x\n", dev_code); if (dev_code == 0 && !sony_rfkill_devices[SONY_WIFI]) From c97adf9e7bebf17a86b95e2131bf9ba76c4857c7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?M=C3=A1rton=20N=C3=A9meth?= Date: Sun, 10 Jan 2010 17:15:36 +0100 Subject: [PATCH 0992/1626] acpi: make ACPI device id constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ids field of the struct acpi_driver is constant in so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Márton Németh Cc: Julia Lawall Cc: cocci@diku.dk Signed-off-by: Len Brown --- drivers/acpi/pci_link.c | 2 +- drivers/acpi/pci_root.c | 2 +- drivers/acpi/power.c | 2 +- drivers/acpi/power_meter.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 394ae89409c2..04b0f007c9b7 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -56,7 +56,7 @@ ACPI_MODULE_NAME("pci_link"); static int acpi_pci_link_add(struct acpi_device *device); static int acpi_pci_link_remove(struct acpi_device *device, int type); -static struct acpi_device_id link_device_ids[] = { +static const struct acpi_device_id link_device_ids[] = { {"PNP0C0F", 0}, {"", 0}, }; diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 101cce3681d1..64f55b6db73c 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -46,7 +46,7 @@ static int acpi_pci_root_add(struct acpi_device *device); static int acpi_pci_root_remove(struct acpi_device *device, int type); static int acpi_pci_root_start(struct acpi_device *device); -static struct acpi_device_id root_device_ids[] = { +static const struct acpi_device_id root_device_ids[] = { {"PNP0A03", 0}, {"", 0}, }; diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 22b297916519..0f30c3c1eea4 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -65,7 +65,7 @@ static int acpi_power_remove(struct acpi_device *device, int type); static int acpi_power_resume(struct acpi_device *device); static int acpi_power_open_fs(struct inode *inode, struct file *file); -static struct acpi_device_id power_device_ids[] = { +static const struct acpi_device_id power_device_ids[] = { {ACPI_POWER_HID, 0}, {"", 0}, }; diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c index 2ef7030a0c28..ca75c36f754c 100644 --- a/drivers/acpi/power_meter.c +++ b/drivers/acpi/power_meter.c @@ -64,7 +64,7 @@ static int can_cap_in_hardware(void) return force_cap_on || cap_in_hardware; } -static struct acpi_device_id power_meter_ids[] = { +static const struct acpi_device_id power_meter_ids[] = { {"ACPI000D", 0}, {"", 0}, }; From c19bdb6126a5e1f43b4a4fc3c4b09c926667e5ef Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Sun, 3 Jan 2010 19:27:56 +0600 Subject: [PATCH 0993/1626] ACPI: Fix unused variable warning in sbs.c When CONFIG_ACPI_SYSFS_POWER=n and CONFIG_ACPI_PROCFS_POWER=n, then we're warned by the following warning: drivers/acpi/sbs.c: In function `acpi_battery_remove': drivers/acpi/sbs.c:825: warning: unused variable `battery' Signed-off-by: Rakib Mullick Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/sbs.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index 52b9db8afc20..b16ddbf23a9c 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -822,7 +822,10 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id) static void acpi_battery_remove(struct acpi_sbs *sbs, int id) { +#if defined(CONFIG_ACPI_SYSFS_POWER) || defined(CONFIG_ACPI_PROCFS_POWER) struct acpi_battery *battery = &sbs->battery[id]; +#endif + #ifdef CONFIG_ACPI_SYSFS_POWER if (battery->bat.dev) { if (battery->have_sysfs_alarm) From 6ccf80eb15ccaca4d3f1ab5162b9ded5eecd9971 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Fri, 15 Jan 2010 17:01:18 -0800 Subject: [PATCH 0994/1626] page allocator: update NR_FREE_PAGES only when necessary commit f2260e6b (page allocator: update NR_FREE_PAGES only as necessary) made one minor regression. if __rmqueue() was failed, NR_FREE_PAGES stat go wrong. this patch fixes it. Signed-off-by: KOSAKI Motohiro Cc: Mel Gorman Reviewed-by: Minchan Kim Reported-by: Huang Shijie Reviewed-by: Christoph Lameter Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 6ea4966a6334..d2a8889b4c58 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1222,10 +1222,10 @@ again: } spin_lock_irqsave(&zone->lock, flags); page = __rmqueue(zone, order, migratetype); - __mod_zone_page_state(zone, NR_FREE_PAGES, -(1 << order)); spin_unlock(&zone->lock); if (!page) goto failed; + __mod_zone_page_state(zone, NR_FREE_PAGES, -(1 << order)); } __count_zone_vm_events(PGALLOC, zone, 1 << order); From 8f06d7e6e1bbfb32698d6d455583ab7460c090e2 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sat, 16 Jan 2010 12:53:19 -0800 Subject: [PATCH 0995/1626] perf timechart: Use tid not pid for COMM change A process that changes its comm field, does this on a per kernel task struct basis. The timechart tool used, incorrectly, the pid to track this, and should have used the tid instead... Signed-off-by: Arjan van de Ven Cc: Peter Zijlstra Cc: Mike Galbraith Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker CC: LKML-Reference: <20100116125319.34ac3edd@infradead.org> Signed-off-by: Ingo Molnar --- tools/perf/builtin-timechart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c index a589a43112d6..3f8bbcfb1e9b 100644 --- a/tools/perf/builtin-timechart.c +++ b/tools/perf/builtin-timechart.c @@ -280,7 +280,7 @@ static u64 cpus_pstate_state[MAX_CPUS]; static int process_comm_event(event_t *event, struct perf_session *session __used) { - pid_set_comm(event->comm.pid, event->comm.comm); + pid_set_comm(event->comm.tid, event->comm.comm); return 0; } From 0bb7a95f5455cd87e6a69e5818bc1f509a98d187 Mon Sep 17 00:00:00 2001 From: Luca Barbieri Date: Sat, 16 Jan 2010 10:39:30 +0100 Subject: [PATCH 0996/1626] hw-breakpoints, perf: Fix broken mmiotrace due to dr6 by reference change Commit 62edab9056a6cf0c9207339c8892c923a5217e45 (from June 2009 but merged in 2.6.33) changes notify_die to pass dr6 by reference. However, it forgets to fix the check for DR_STEP in kmmio.c, breaking mmiotrace. It also passes a wrong value to the post handler. This simple fix makes mmiotrace work again. Signed-off-by: Luca Barbieri Acked-by: K.Prasad Cc: Frederic Weisbecker LKML-Reference: <1263634770-14578-1-git-send-email-luca@luca-barbieri.com> Signed-off-by: Ingo Molnar --- arch/x86/mm/kmmio.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index c0f6198565eb..536fb6823366 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -538,14 +538,15 @@ static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, void *args) { struct die_args *arg = args; + unsigned long* dr6_p = (unsigned long *)ERR_PTR(arg->err); - if (val == DIE_DEBUG && (arg->err & DR_STEP)) - if (post_kmmio_handler(arg->err, arg->regs) == 1) { + if (val == DIE_DEBUG && (*dr6_p & DR_STEP)) + if (post_kmmio_handler(*dr6_p, arg->regs) == 1) { /* * Reset the BS bit in dr6 (pointed by args->err) to * denote completion of processing */ - (*(unsigned long *)ERR_PTR(arg->err)) &= ~DR_STEP; + *dr6_p &= ~DR_STEP; return NOTIFY_STOP; } From eaa9b3a748539651f50e3a234c8854e1b42a839a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 17 Jan 2010 13:09:33 +0100 Subject: [PATCH 0997/1626] ALSA: hda - Fix capture on Sony VAIO with single input Sony VAIO VGN-P11G with ALC262 codec has only one input pin, and the recording doesn't work with model=auto because ALC262 parser sets the wrong cap NIDs to choose the route and the default route for the sole input pin wasn't initialized properly. This patch solves these issues. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 62 ++++++++++++++++++++++++++++++----- 1 file changed, 54 insertions(+), 8 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index abae1007cea2..3f92def752fd 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1230,6 +1230,8 @@ static void alc_init_auto_mic(struct hda_codec *codec) return; /* invalid entry */ } } + if (!ext || !fixed) + return; if (!(get_wcaps(codec, ext) & AC_WCAP_UNSOL_CAP)) return; /* no unsol support */ snd_printdd("realtek: Enable auto-mic switch on NID 0x%x/0x%x\n", @@ -4812,6 +4814,49 @@ static void fixup_automic_adc(struct hda_codec *codec) spec->auto_mic = 0; /* disable auto-mic to be sure */ } +/* choose the ADC/MUX containing the input pin and initialize the setup */ +static void fixup_single_adc(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + hda_nid_t pin; + int i; + + /* search for the input pin; there must be only one */ + for (i = 0; i < AUTO_PIN_LAST; i++) { + if (spec->autocfg.input_pins[i]) { + pin = spec->autocfg.input_pins[i]; + break; + } + } + if (!pin) + return; + + /* set the default connection to that pin */ + for (i = 0; i < spec->num_adc_nids; i++) { + hda_nid_t cap = spec->capsrc_nids ? + spec->capsrc_nids[i] : spec->adc_nids[i]; + int idx; + + idx = get_connection_index(codec, cap, pin); + if (idx < 0) + continue; + /* use only this ADC */ + if (spec->capsrc_nids) + spec->capsrc_nids += i; + spec->adc_nids += i; + spec->num_adc_nids = 1; + /* select or unmute this route */ + if (get_wcaps_type(get_wcaps(codec, cap)) == AC_WID_AUD_MIX) { + snd_hda_codec_amp_stereo(codec, cap, HDA_INPUT, idx, + HDA_AMP_MUTE, 0); + } else { + snd_hda_codec_write_cache(codec, cap, 0, + AC_VERB_SET_CONNECT_SEL, idx); + } + return; + } +} + static void set_capture_mixer(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; @@ -4824,14 +4869,15 @@ static void set_capture_mixer(struct hda_codec *codec) alc_capture_mixer3 }, }; if (spec->num_adc_nids > 0 && spec->num_adc_nids <= 3) { - int mux; - if (spec->auto_mic) { - mux = 0; + int mux = 0; + if (spec->auto_mic) fixup_automic_adc(codec); - } else if (spec->input_mux && spec->input_mux->num_items > 1) - mux = 1; - else - mux = 0; + else if (spec->input_mux) { + if (spec->input_mux->num_items > 1) + mux = 1; + else if (spec->input_mux->num_items == 1) + fixup_single_adc(codec); + } spec->cap_mixer = caps[mux][spec->num_adc_nids - 1]; } } @@ -11203,7 +11249,7 @@ static int alc262_auto_create_multi_out_ctls(struct alc_spec *spec, } #define alc262_auto_create_input_ctls \ - alc880_auto_create_input_ctls + alc882_auto_create_input_ctls /* * generic initialization of ADC, input mixers and output mixers From 8c32aa5945cb05bb2ff8a91485d4477fbe55cf00 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 14 Dec 2009 14:57:49 -0300 Subject: [PATCH 0998/1626] V4L/DVB (13816): gspca - main: Set the current frame pointer when first qbuf. When not set, some images could be lost. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index e930a67d526b..bd6214d4ab3b 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1815,6 +1815,8 @@ static int vidioc_qbuf(struct file *file, void *priv, /* put the buffer in the 'queued' queue */ i = gspca_dev->fr_q; gspca_dev->fr_queue[i] = index; + if (gspca_dev->fr_i == i) + gspca_dev->cur_frame = frame; gspca_dev->fr_q = (i + 1) % gspca_dev->nframes; PDEBUG(D_FRAM, "qbuf q:%d i:%d o:%d", gspca_dev->fr_q, From 1faea56087dfaf84019557f2c9ad18bd67c6012a Mon Sep 17 00:00:00 2001 From: Nemeth Marton Date: Tue, 15 Dec 2009 19:28:35 -0300 Subject: [PATCH 0999/1626] V4L/DVB (13820): lgdt3305: make one-bit bitfields unsigned Make one-bit bitfields unsigned which will remove the following sparse warning messages (see "make C=1"): * lgdt3305.h:57:21: error: dubious one-bit signed bitfield * lgdt3305.h:60:26: error: dubious one-bit signed bitfield * lgdt3305.h:63:19: error: dubious one-bit signed bitfield Signed-off-by: Nemeth Marton Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/lgdt3305.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/frontends/lgdt3305.h b/drivers/media/dvb/frontends/lgdt3305.h index 4fa6e52d1fe8..9cb11c9cae53 100644 --- a/drivers/media/dvb/frontends/lgdt3305.h +++ b/drivers/media/dvb/frontends/lgdt3305.h @@ -54,13 +54,13 @@ struct lgdt3305_config { u16 usref_qam256; /* default: 0x2a80 */ /* disable i2c repeater - 0:repeater enabled 1:repeater disabled */ - int deny_i2c_rptr:1; + unsigned int deny_i2c_rptr:1; /* spectral inversion - 0:disabled 1:enabled */ - int spectral_inversion:1; + unsigned int spectral_inversion:1; /* use RF AGC loop - 0:disabled 1:enabled */ - int rf_agc_loop:1; + unsigned int rf_agc_loop:1; enum lgdt3305_mpeg_mode mpeg_mode; enum lgdt3305_tp_clock_edge tpclk_edge; From 385097e08b9c24655626ed760bc67eb7e50115a0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 9 Dec 2009 22:31:21 -0300 Subject: [PATCH 1000/1626] V4L/DVB (13826): uvcvideo: Fix controls blacklisting The control blacklisting code erroneously used usb_match_id() by passing a pointer to a usb_device_id structure instead of an array of such structures. Replace the usb_match_id() call by usb_match_id_one(). Thanks to Paulo Assis for diagnosing the bug and providing an initial fix. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_ctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index 0469d7a876a8..ec8ef8c5560a 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -1393,7 +1393,7 @@ uvc_ctrl_prune_entity(struct uvc_device *dev, struct uvc_entity *entity) size = entity->processing.bControlSize; for (i = 0; i < ARRAY_SIZE(blacklist); ++i) { - if (!usb_match_id(dev->intf, &blacklist[i].id)) + if (!usb_match_one_id(dev->intf, &blacklist[i].id)) continue; if (blacklist[i].index >= 8 * size || From 2c4d9de8ab1434336248bbc01ee8e64d7e6b8a4f Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 10 Dec 2009 21:19:31 -0300 Subject: [PATCH 1001/1626] V4L/DVB (13829): uvcvideo: Fix alternate setting selection in isochronous mode Unlike assumed by the driver, alternate settings are not sorted by endpoint max packet size. Iterate over all alternate settings to find the one with the smallest compatible max packet size. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_video.c | 31 ++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index 9a9802830d41..e8cc0a9ddadd 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -924,10 +924,8 @@ static int uvc_init_video_bulk(struct uvc_streaming *stream, static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags) { struct usb_interface *intf = stream->intf; - struct usb_host_interface *alts; - struct usb_host_endpoint *ep = NULL; - int intfnum = stream->intfnum; - unsigned int bandwidth, psize, i; + struct usb_host_endpoint *ep; + unsigned int i; int ret; stream->last_fid = -1; @@ -936,6 +934,12 @@ static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags) stream->bulk.payload_size = 0; if (intf->num_altsetting > 1) { + struct usb_host_endpoint *best_ep = NULL; + unsigned int best_psize = 3 * 1024; + unsigned int bandwidth; + unsigned int uninitialized_var(altsetting); + int intfnum = stream->intfnum; + /* Isochronous endpoint, select the alternate setting. */ bandwidth = stream->ctrl.dwMaxPayloadTransferSize; @@ -949,6 +953,9 @@ static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags) } for (i = 0; i < intf->num_altsetting; ++i) { + struct usb_host_interface *alts; + unsigned int psize; + alts = &intf->altsetting[i]; ep = uvc_find_endpoint(alts, stream->header.bEndpointAddress); @@ -958,21 +965,27 @@ static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags) /* Check if the bandwidth is high enough. */ psize = le16_to_cpu(ep->desc.wMaxPacketSize); psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); - if (psize >= bandwidth) - break; + if (psize >= bandwidth && psize <= best_psize) { + altsetting = i; + best_psize = psize; + best_ep = ep; + } } - if (i >= intf->num_altsetting) { + if (best_ep == NULL) { uvc_trace(UVC_TRACE_VIDEO, "No fast enough alt setting " "for requested bandwidth.\n"); return -EIO; } - ret = usb_set_interface(stream->dev->udev, intfnum, i); + uvc_trace(UVC_TRACE_VIDEO, "Selecting alternate setting %u " + "(%u B/frame bandwidth).\n", altsetting, best_psize); + + ret = usb_set_interface(stream->dev->udev, intfnum, altsetting); if (ret < 0) return ret; - ret = uvc_init_video_isoc(stream, ep, gfp_flags); + ret = uvc_init_video_isoc(stream, best_ep, gfp_flags); } else { /* Bulk endpoint, proceed to URB initialization. */ ep = uvc_find_endpoint(&intf->altsetting[0], From d7c0d43997cf716617d724554d19b3b8dd465833 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 16 Dec 2009 21:20:45 -0300 Subject: [PATCH 1002/1626] V4L/DVB (13831): uvcvideo: Fix oops caused by a race condition in buffer dequeuing Buffers were marked as done before being removed from the IRQ queue. If a userspace application dequeued and requeued the buffer fast enough during that time window, the buffer could end up being deleted twice, generating an oops in interrupt context. Add a new state, UVC_BUF_STATE_READY, to mark buffers as ready for reuse but not yet removed from the queue, and transition to UVC_BUF_STATE_DONE only when the buffer is removed from the queue. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_queue.c | 13 +++++++++---- drivers/media/video/uvc/uvc_video.c | 14 ++++++-------- drivers/media/video/uvc/uvcvideo.h | 5 +++-- 3 files changed, 18 insertions(+), 14 deletions(-) diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c index f854698c4061..ea11839cba4a 100644 --- a/drivers/media/video/uvc/uvc_queue.c +++ b/drivers/media/video/uvc/uvc_queue.c @@ -59,9 +59,9 @@ * returns immediately. * * When the buffer is full, the completion handler removes it from the irq - * queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue. + * queue, marks it as done (UVC_BUF_STATE_DONE) and wakes its wait queue. * At that point, any process waiting on the buffer will be woken up. If a - * process tries to dequeue a buffer after it has been marked ready, the + * process tries to dequeue a buffer after it has been marked done, the * dequeing will succeed immediately. * * 2. Buffers are queued, user is waiting on a buffer and the device gets @@ -201,6 +201,7 @@ static void __uvc_query_buffer(struct uvc_buffer *buf, break; case UVC_BUF_STATE_QUEUED: case UVC_BUF_STATE_ACTIVE: + case UVC_BUF_STATE_READY: v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED; break; case UVC_BUF_STATE_IDLE: @@ -295,13 +296,15 @@ static int uvc_queue_waiton(struct uvc_buffer *buf, int nonblocking) { if (nonblocking) { return (buf->state != UVC_BUF_STATE_QUEUED && - buf->state != UVC_BUF_STATE_ACTIVE) + buf->state != UVC_BUF_STATE_ACTIVE && + buf->state != UVC_BUF_STATE_READY) ? 0 : -EAGAIN; } return wait_event_interruptible(buf->wait, buf->state != UVC_BUF_STATE_QUEUED && - buf->state != UVC_BUF_STATE_ACTIVE); + buf->state != UVC_BUF_STATE_ACTIVE && + buf->state != UVC_BUF_STATE_READY); } /* @@ -348,6 +351,7 @@ int uvc_dequeue_buffer(struct uvc_video_queue *queue, case UVC_BUF_STATE_IDLE: case UVC_BUF_STATE_QUEUED: case UVC_BUF_STATE_ACTIVE: + case UVC_BUF_STATE_READY: default: uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u " "(driver bug?).\n", buf->state); @@ -489,6 +493,7 @@ struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, spin_lock_irqsave(&queue->irqlock, flags); list_del(&buf->queue); + buf->state = UVC_BUF_STATE_DONE; if (!list_empty(&queue->irqqueue)) nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer, queue); diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index e8cc0a9ddadd..7dcf534a0cf3 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -441,7 +441,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, if (fid != stream->last_fid && buf->buf.bytesused != 0) { uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit " "toggled).\n"); - buf->state = UVC_BUF_STATE_DONE; + buf->state = UVC_BUF_STATE_READY; return -EAGAIN; } @@ -470,7 +470,7 @@ static void uvc_video_decode_data(struct uvc_streaming *stream, /* Complete the current frame if the buffer size was exceeded. */ if (len > maxlen) { uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n"); - buf->state = UVC_BUF_STATE_DONE; + buf->state = UVC_BUF_STATE_READY; } } @@ -482,7 +482,7 @@ static void uvc_video_decode_end(struct uvc_streaming *stream, uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n"); if (data[0] == len) uvc_trace(UVC_TRACE_FRAME, "EOF in empty payload.\n"); - buf->state = UVC_BUF_STATE_DONE; + buf->state = UVC_BUF_STATE_READY; if (stream->dev->quirks & UVC_QUIRK_STREAM_NO_FID) stream->last_fid ^= UVC_STREAM_FID; } @@ -568,8 +568,7 @@ static void uvc_video_decode_isoc(struct urb *urb, struct uvc_streaming *stream, uvc_video_decode_end(stream, buf, mem, urb->iso_frame_desc[i].actual_length); - if (buf->state == UVC_BUF_STATE_DONE || - buf->state == UVC_BUF_STATE_ERROR) + if (buf->state == UVC_BUF_STATE_READY) buf = uvc_queue_next_buffer(&stream->queue, buf); } } @@ -627,8 +626,7 @@ static void uvc_video_decode_bulk(struct urb *urb, struct uvc_streaming *stream, if (!stream->bulk.skip_payload && buf != NULL) { uvc_video_decode_end(stream, buf, stream->bulk.header, stream->bulk.payload_size); - if (buf->state == UVC_BUF_STATE_DONE || - buf->state == UVC_BUF_STATE_ERROR) + if (buf->state == UVC_BUF_STATE_READY) buf = uvc_queue_next_buffer(&stream->queue, buf); } @@ -669,7 +667,7 @@ static void uvc_video_encode_bulk(struct urb *urb, struct uvc_streaming *stream, stream->bulk.payload_size == stream->bulk.max_payload_size) { if (buf->buf.bytesused == stream->queue.buf_used) { stream->queue.buf_used = 0; - buf->state = UVC_BUF_STATE_DONE; + buf->state = UVC_BUF_STATE_READY; uvc_queue_next_buffer(&stream->queue, buf); stream->last_fid ^= UVC_STREAM_FID; } diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index 7ec9a04ced50..2337585001ea 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -365,8 +365,9 @@ enum uvc_buffer_state { UVC_BUF_STATE_IDLE = 0, UVC_BUF_STATE_QUEUED = 1, UVC_BUF_STATE_ACTIVE = 2, - UVC_BUF_STATE_DONE = 3, - UVC_BUF_STATE_ERROR = 4, + UVC_BUF_STATE_READY = 3, + UVC_BUF_STATE_DONE = 4, + UVC_BUF_STATE_ERROR = 5, }; struct uvc_buffer { From 9afc8022b4e7e4e8c572b2b997846756afb5d909 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 18 Dec 2009 07:47:44 -0300 Subject: [PATCH 1003/1626] V4L/DVB (13834): dib8000: fix compilation if !DVB_DIB8000 As reported by Randy Dunlap : > drivers/media/dvb/frontends/dib8000.h:104: error: expected expression before '}' token > drivers/media/dvb/frontends/dib8000.h:104: warning: left-hand operand of comma expression has no effect > > return CT_SHUTDOWN, > > s/,/;/ and fix indentation. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/dib8000.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/dib8000.h b/drivers/media/dvb/frontends/dib8000.h index d99619ae983c..b1ee20799639 100644 --- a/drivers/media/dvb/frontends/dib8000.h +++ b/drivers/media/dvb/frontends/dib8000.h @@ -100,7 +100,7 @@ static inline int dib8000_set_tune_state(struct dvb_frontend *fe, enum frontend_ static inline enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); - return CT_SHUTDOWN, + return CT_SHUTDOWN; } static inline void dib8000_pwm_agc_reset(struct dvb_frontend *fe) { From bc41797a56e7995dd5f5502dd737b1e53c8e0410 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Thu, 10 Dec 2009 13:21:59 -0300 Subject: [PATCH 1004/1626] V4L/DVB (13622): gspca - ov534: Fix a compilation warning. This warning prevented the sharpness setting to work with the ov965x sensor. Reported-by: Andrew Morton Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov534.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c index 4dbb882c83dc..0a6b8f07a69d 100644 --- a/drivers/media/video/gspca/ov534.c +++ b/drivers/media/video/gspca/ov534.c @@ -1533,7 +1533,7 @@ static void setexposure_96(struct gspca_dev *gspca_dev) static void setsharpness_96(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - u8 val; + s8 val; val = sd->sharpness; if (val < 0) { /* auto */ From ceafe1d2fe33e92691bfdbd5a93ed259c3da7b60 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 11 Jan 2010 10:50:53 -0200 Subject: [PATCH 1005/1626] feature-removal-schedule: Add v4l1 drivers obsoleted by gspca sub drivers This patch adds the ov511, quickcam_messenger, w9968cf, stv680 and ovcamchip v4l1 drivers to the feature removal schedule as the devices they support are now all also supported by v4l2 gspca sub drivers. This patch also adds the v4l2 vc0301 driver for removal as it duplicates functionality of the gspca_zc3xx driver, zc0301 only supports 2 USB-ID's (because it only supports a limited set of sensors) wich are also supported by the gspca_zc3xx driver (which supports 53 USB-ID's in total). [mchehab@redhat.com: change "when" to 2.6.35] Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- Documentation/feature-removal-schedule.txt | 49 ++++++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 870d190fe617..0a46833c1b76 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -493,3 +493,52 @@ Why: These two features use non-standard interfaces. There are the Who: Corentin Chary ---------------------------- + +What: usbvideo quickcam_messenger driver +When: 2.6.35 +Files: drivers/media/video/usbvideo/quickcam_messenger.[ch] +Why: obsolete v4l1 driver replaced by gspca_stv06xx +Who: Hans de Goede + +---------------------------- + +What: ov511 v4l1 driver +When: 2.6.35 +Files: drivers/media/video/ov511.[ch] +Why: obsolete v4l1 driver replaced by gspca_ov519 +Who: Hans de Goede + +---------------------------- + +What: w9968cf v4l1 driver +When: 2.6.35 +Files: drivers/media/video/w9968cf*.[ch] +Why: obsolete v4l1 driver replaced by gspca_ov519 +Who: Hans de Goede + +---------------------------- + +What: ovcamchip sensor framework +When: 2.6.35 +Files: drivers/media/video/ovcamchip/* +Why: Only used by obsoleted v4l1 drivers +Who: Hans de Goede + +---------------------------- + +What: stv680 v4l1 driver +When: 2.6.35 +Files: drivers/media/video/stv680.[ch] +Why: obsolete v4l1 driver replaced by gspca_stv0680 +Who: Hans de Goede + +---------------------------- + +What: zc0301 v4l driver +When: 2.6.35 +Files: drivers/media/video/zc0301/* +Why: Duplicate functionality with the gspca_zc3xx driver, zc0301 only + supports 2 USB-ID's (because it only supports a limited set of + sensors) wich are also supported by the gspca_zc3xx driver + (which supports 53 USB-ID's in total) +Who: Hans de Goede From 882ead325b167cdab89f58f871dabf9de5ac87a4 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 29 Dec 2009 10:37:38 -0300 Subject: [PATCH 1006/1626] V4L/DVB (13858): ir-keytable: use the right header We don't need linux/usb/input.h but, instead, linux/input.h Signed-off-by: Mauro Carvalho Chehab --- drivers/media/IR/ir-keytable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c index bff7a5356037..b521ed9d6e2e 100644 --- a/drivers/media/IR/ir-keytable.c +++ b/drivers/media/IR/ir-keytable.c @@ -13,7 +13,7 @@ */ -#include +#include #include #define IR_TAB_MIN_SIZE 32 From c60503c1db76bd46577cc7ff4fafa033b675e0e5 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 18 Dec 2009 12:22:43 -0300 Subject: [PATCH 1007/1626] V4L/DVB (13868): gspca - sn9c20x: Fix test of unsigned. Signed-off-by: Roel Kluin Signed-off-by: Jean-Francois Moine CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sn9c20x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c index 4cff8035614f..0ca1c06652b1 100644 --- a/drivers/media/video/gspca/sn9c20x.c +++ b/drivers/media/video/gspca/sn9c20x.c @@ -2319,7 +2319,7 @@ static void do_autogain(struct gspca_dev *gspca_dev, u16 avg_lum) } } if (avg_lum > MAX_AVG_LUM) { - if (sd->gain - 1 >= 0) { + if (sd->gain >= 1) { sd->gain--; set_gain(gspca_dev); } From 9501843496aaf85fe1767b534c4720622c4425c4 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sat, 26 Dec 2009 08:41:17 -0300 Subject: [PATCH 1008/1626] V4L/DVB (13875): gspca - vc032x: Fix a possible crash with the vc0321 bridge. The frame pointer returned by get_i_frame may be NULL when the application is too slow. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/vc032x.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index c090efcd8045..71921c878424 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -3009,6 +3009,10 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, int l; frame = gspca_get_i_frame(gspca_dev); + if (frame == NULL) { + gspca_dev->last_packet_type = DISCARD_PACKET; + return; + } l = frame->data_end - frame->data; if (len > frame->v4l2_buf.length - l) len = frame->v4l2_buf.length - l; From 5cc60d61432f30b2d0777a15d050f6c0613887f5 Mon Sep 17 00:00:00 2001 From: Erik Andren Date: Wed, 11 Nov 2009 07:45:37 -0300 Subject: [PATCH 1009/1626] V4L/DVB (13880): gspca - m5602-s5k4aa: Add vflip quirk for the Amilo Xi 2428 Add a vflip quirk for the Fujitsu-Siemens Amilo Xi 2428. Thanks to Myroslav Zapukhlyak for reporting. Signed-off-by: Erik Andren Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index aa2f3c7e2cb5..1b536f7d30cf 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -47,6 +47,12 @@ static DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xa 2528") } + }, { + .ident = "Fujitsu-Siemens Amilo Xi 2428", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 2428") + } }, { .ident = "Fujitsu-Siemens Amilo Xi 2528", .matches = { From bbe8c8363da7251b41ee9cdb70059f04fd1bee9b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Sat, 26 Dec 2009 18:57:21 -0300 Subject: [PATCH 1010/1626] V4L/DVB (13882): gspca - stv06xx-vv6410: Ensure register STV_SCAN_RATE is zero MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Quickcam Web camera would not produce an image if you removed and inserted the module multiple times without physically power cycling the camera first. By writing zero to bridge register STV_SCAN_RATE (0x1443) the camera works as intended, regardless of the number of module insertions. Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h index 487d40555343..96c61926d372 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h +++ b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h @@ -228,6 +228,7 @@ static const struct stv_init stv_bridge_init[] = { /* This reg is written twice. Some kind of reset? */ {NULL, 0x1620, 0x80}, {NULL, 0x1620, 0x00}, + {NULL, 0x1443, 0x00}, {NULL, 0x1423, 0x04}, {x1500, 0x1500, ARRAY_SIZE(x1500)}, {x1536, 0x1536, ARRAY_SIZE(x1536)}, From 19f8a6c37eead7e93660813c8873ab3e387ccb63 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 31 Dec 2009 04:32:29 -0300 Subject: [PATCH 1011/1626] V4L/DVB (13887): tda8290: add autodetection support for TDA8295c2 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda8290.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c index c190b0dedee4..19010f3d4508 100644 --- a/drivers/media/common/tuners/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -672,16 +672,19 @@ static int tda8290_probe(struct tuner_i2c_props *i2c_props) static int tda8295_probe(struct tuner_i2c_props *i2c_props) { #define TDA8295_ID 0x8a +#define TDA8295C2_ID 0x8b unsigned char tda8295_id[] = { 0x2f, 0x00 }; /* detect tda8295 */ tuner_i2c_xfer_send(i2c_props, &tda8295_id[0], 1); tuner_i2c_xfer_recv(i2c_props, &tda8295_id[1], 1); - if (tda8295_id[1] == TDA8295_ID) { + if ((tda8295_id[1] & 0xfe) == TDA8295_ID) { if (debug) - printk(KERN_DEBUG "%s: tda8295 detected @ %d-%04x\n", - __func__, i2c_adapter_id(i2c_props->adap), + printk(KERN_DEBUG "%s: %s detected @ %d-%04x\n", + __func__, (tda8295_id[1] == TDA8295_ID) ? + "tda8295c1" : "tda8295c2", + i2c_adapter_id(i2c_props->adap), i2c_props->addr); return 0; } From 07d1c69b2dcfdd1b21e36af0ff8b9506234908ee Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sun, 10 Jan 2010 04:32:11 -0300 Subject: [PATCH 1012/1626] V4L/DVB (13900): gspca - sunplus: Fix bridge exchanges. A previous code optimization inverted bridge registers and values, doing a regression in kernel 2.6.32. Signed-off-by: Jean-Francois Moine CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sunplus.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index 716df6b15fc5..306b7d75b4aa 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -709,7 +709,7 @@ static void spca504B_SetSizeType(struct gspca_dev *gspca_dev) spca504B_PollingDataReady(gspca_dev); /* Init the cam width height with some values get on init ? */ - reg_w_riv(gspca_dev, 0x31, 0, 0x04); + reg_w_riv(gspca_dev, 0x31, 0x0004, 0x00); spca504B_WaitCmdStatus(gspca_dev); spca504B_PollingDataReady(gspca_dev); break; @@ -807,14 +807,14 @@ static void init_ctl_reg(struct gspca_dev *gspca_dev) default: /* case BRIDGE_SPCA533: */ /* case BRIDGE_SPCA504B: */ - reg_w_riv(gspca_dev, 0, 0x00, 0x21ad); /* hue */ - reg_w_riv(gspca_dev, 0, 0x01, 0x21ac); /* sat/hue */ - reg_w_riv(gspca_dev, 0, 0x00, 0x21a3); /* gamma */ + reg_w_riv(gspca_dev, 0, 0x21ad, 0x00); /* hue */ + reg_w_riv(gspca_dev, 0, 0x21ac, 0x01); /* sat/hue */ + reg_w_riv(gspca_dev, 0, 0x21a3, 0x00); /* gamma */ break; case BRIDGE_SPCA536: - reg_w_riv(gspca_dev, 0, 0x40, 0x20f5); - reg_w_riv(gspca_dev, 0, 0x01, 0x20f4); - reg_w_riv(gspca_dev, 0, 0x00, 0x2089); + reg_w_riv(gspca_dev, 0, 0x20f5, 0x40); + reg_w_riv(gspca_dev, 0, 0x20f4, 0x01); + reg_w_riv(gspca_dev, 0, 0x2089, 0x00); break; } if (pollreg) @@ -887,11 +887,11 @@ static int sd_init(struct gspca_dev *gspca_dev) switch (sd->bridge) { case BRIDGE_SPCA504B: reg_w_riv(gspca_dev, 0x1d, 0x00, 0); - reg_w_riv(gspca_dev, 0, 0x01, 0x2306); - reg_w_riv(gspca_dev, 0, 0x00, 0x0d04); - reg_w_riv(gspca_dev, 0, 0x00, 0x2000); - reg_w_riv(gspca_dev, 0, 0x13, 0x2301); - reg_w_riv(gspca_dev, 0, 0x00, 0x2306); + reg_w_riv(gspca_dev, 0x00, 0x2306, 0x01); + reg_w_riv(gspca_dev, 0x00, 0x0d04, 0x00); + reg_w_riv(gspca_dev, 0x00, 0x2000, 0x00); + reg_w_riv(gspca_dev, 0x00, 0x2301, 0x13); + reg_w_riv(gspca_dev, 0x00, 0x2306, 0x00); /* fall thru */ case BRIDGE_SPCA533: spca504B_PollingDataReady(gspca_dev); @@ -1000,7 +1000,7 @@ static int sd_start(struct gspca_dev *gspca_dev) spca504B_WaitCmdStatus(gspca_dev); break; default: - reg_w_riv(gspca_dev, 0x31, 0, 0x04); + reg_w_riv(gspca_dev, 0x31, 0x0004, 0x00); spca504B_WaitCmdStatus(gspca_dev); spca504B_PollingDataReady(gspca_dev); break; From 3f76cf8c8ed10da1ce50f821366d0dc590397069 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 10 Jan 2010 18:13:33 -0300 Subject: [PATCH 1013/1626] V4L/DVB (13934): tda8290: Fix FM radio easy programming standard selection for TDA8295 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda8290.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c index 19010f3d4508..2833137fa819 100644 --- a/drivers/media/common/tuners/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -144,7 +144,8 @@ static void set_audio(struct dvb_frontend *fe, } if (params->mode == V4L2_TUNER_RADIO) { - priv->tda8290_easy_mode = 0x01; /* Start with MN values */ + /* Set TDA8295 to FM radio; Start TDA8290 with MN values */ + priv->tda8290_easy_mode = (priv->ver & TDA8295) ? 0x80 : 0x01; tuner_dbg("setting to radio FM\n"); } else { tuner_dbg("setting tda829x to system %s\n", mode); From 30883ea8f2b489ccbb6aa0755832218ec45468a1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sat, 9 Jan 2010 20:44:06 -0300 Subject: [PATCH 1014/1626] V4L/DVB mx1_camera: don't check platform_get_irq's return value against zero MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit platform_get_irq returns -ENXIO on failure, so !irq was probably always true. Better use (int)irq <= 0. Note that a return value of zero is still handled as error even though this could mean irq0. This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that changed the return value of platform_get_irq from 0 to -ENXIO on error. Cc: David Vrabel Cc: Greg Kroah-Hartman Cc: Mauro Carvalho Chehab Cc: Guennadi Liakhovetski Cc: Antonio Ospite Cc: Paulius Zaleckas Cc: linux-media@vger.kernel.org Signed-off-by: Uwe Kleine-König Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mx1_camera.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c index 2ba14fb5b031..c167cc3de492 100644 --- a/drivers/media/video/mx1_camera.c +++ b/drivers/media/video/mx1_camera.c @@ -718,7 +718,7 @@ static int __init mx1_camera_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!res || !irq) { + if (!res || (int)irq <= 0) { err = -ENODEV; goto exit; } From b89fc2e5e7b6d6da3ab9a2dc05810794e5eac869 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sat, 9 Jan 2010 20:45:13 -0300 Subject: [PATCH 1015/1626] V4L/DVB sh_mobile_ceu: don't check platform_get_irq's return value against zero MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit platform_get_irq returns -ENXIO on failure, so !irq was probably always true. Better use (int)irq <= 0. Note that a return value of zero is still handled as error even though this could mean irq0. This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that changed the return value of platform_get_irq from 0 to -ENXIO on error. Cc: David Vrabel Cc: Greg Kroah-Hartman Cc: Mauro Carvalho Chehab Cc: Guennadi Liakhovetski Cc: Magnus Damm Cc: Kuninori Morimoto Cc: Paul Mundt Cc: linux-media@vger.kernel.org Signed-off-by: Uwe Kleine-König Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/sh_mobile_ceu_camera.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index d69363f0d8c9..f09c7140d6b2 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -1827,7 +1827,7 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!res || !irq) { + if (!res || (int)irq <= 0) { dev_err(&pdev->dev, "Not enough CEU platform resources.\n"); err = -ENODEV; goto exit; From 21c91d2ee8b547e9661892d0532f69082c8a97aa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?M=C3=A1rton=20N=C3=A9meth?= Date: Sat, 9 Jan 2010 20:45:59 -0300 Subject: [PATCH 1016/1626] V4L/DVB (13941): rj54n1cb0c: remove compiler warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove the following compiler warning: 'dummy' is used uninitialized in this function. Although the result in the dummy variable is not used the program flow in soc_camera_limit_side() depends on the value in dummy. The program flow is better to be deterministic. Signed-off-by: Márton Németh Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/rj54n1cb0c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c index 7e42989ce0e4..805226e0d9c1 100644 --- a/drivers/media/video/rj54n1cb0c.c +++ b/drivers/media/video/rj54n1cb0c.c @@ -563,7 +563,7 @@ static int rj54n1_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) struct i2c_client *client = sd->priv; struct rj54n1 *rj54n1 = to_rj54n1(client); struct v4l2_rect *rect = &a->c; - unsigned int dummy, output_w, output_h, + unsigned int dummy = 0, output_w, output_h, input_w = rect->width, input_h = rect->height; int ret; From 8e21cbbcacd1949c0e6929a739cf9d689cc38857 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 13 Jan 2010 16:56:48 -0200 Subject: [PATCH 1017/1626] MAINTAINERS: Andy Walls is the new ivtv maintainer Replaces Hans Verkuil by Andy Walls as the ivtv maintainer. After 4 1/2 years, Hans decided to hand over the ivtv driver to Andy. Andy was already doing more work on ivtv than him, so this just makes official what was happening in practice. Signed-off-by: Hans Verkuil Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3f591629e953..47c1474db052 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1637,7 +1637,6 @@ S: Maintained F: sound/pci/cs5535audio/ CX18 VIDEO4LINUX DRIVER -M: Hans Verkuil M: Andy Walls L: ivtv-devel@ivtvdriver.org L: linux-media@vger.kernel.org @@ -3011,7 +3010,7 @@ S: Maintained F: drivers/isdn/hardware/eicon/ IVTV VIDEO4LINUX DRIVER -M: Hans Verkuil +M: Andy Walls L: ivtv-devel@ivtvdriver.org L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git From c42405096bd804c82c7ac9addcbadea7390158e4 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 13 Jan 2010 19:39:16 -0200 Subject: [PATCH 1018/1626] MAINTAINERS: ivtv-devel is moderated Mark ivtv-devel@ivtvdriver.org as 'moderated for non-subscribers'. Signed-off-by: Jiri Slaby Acked-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 47c1474db052..1858646b52e3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1638,7 +1638,7 @@ F: sound/pci/cs5535audio/ CX18 VIDEO4LINUX DRIVER M: Andy Walls -L: ivtv-devel@ivtvdriver.org +L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers) L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://linuxtv.org @@ -3011,7 +3011,7 @@ F: drivers/isdn/hardware/eicon/ IVTV VIDEO4LINUX DRIVER M: Andy Walls -L: ivtv-devel@ivtvdriver.org +L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers) L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.ivtvdriver.org From 423f5c0d016cd6b65c468d3dcdeeb708ee68074b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 28 Dec 2009 13:59:46 -0300 Subject: [PATCH 1019/1626] V4L/DVB (13955): cx25821: fix double unlock in medusa_video_init() medusa_set_videostandard() takes the lock but it always drops it before returning. This was found with a static checker and compile tested only. :/ Signed-off-by: Dan Carpenter Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/cx25821/cx25821-medusa-video.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/staging/cx25821/cx25821-medusa-video.c b/drivers/staging/cx25821/cx25821-medusa-video.c index e4df8134f059..1eb079b3d429 100644 --- a/drivers/staging/cx25821/cx25821-medusa-video.c +++ b/drivers/staging/cx25821/cx25821-medusa-video.c @@ -860,10 +860,8 @@ int medusa_video_init(struct cx25821_dev *dev) ret_val = medusa_set_videostandard(dev); - if (ret_val < 0) { - mutex_unlock(&dev->lock); + if (ret_val < 0) return -EINVAL; - } return 1; } From 08be64be3d1e5ecd72e7ba3147aea518e527f08e Mon Sep 17 00:00:00 2001 From: Dmitri Belimov Date: Fri, 8 Jan 2010 06:38:28 -0300 Subject: [PATCH 1020/1626] V4L/DVB (13966): DVB-T regression fix for saa7134 cards Some customers has problem with quality of DVB-T https://bugs.launchpad.net/ubuntu/+source/linux/+bug/446575 After this patch http://patchwork.kernel.org/patch/23345/ This is patch for fix regression with DVB-T. Tested with many people. Signed-off-by: Alexey Osipov Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-core.c | 13 ------------- drivers/media/video/saa7134/saa7134-ts.c | 13 +++++++++++++ 2 files changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 9f85e917f9f3..a7ad7810fddc 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -420,19 +420,6 @@ int saa7134_set_dmabits(struct saa7134_dev *dev) ctrl |= SAA7134_MAIN_CTRL_TE5; irq |= SAA7134_IRQ1_INTE_RA2_1 | SAA7134_IRQ1_INTE_RA2_0; - - /* dma: setup channel 5 (= TS) */ - - saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff); - saa_writeb(SAA7134_TS_DMA1, - ((dev->ts.nr_packets - 1) >> 8) & 0xff); - /* TSNOPIT=0, TSCOLAP=0 */ - saa_writeb(SAA7134_TS_DMA2, - (((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00); - saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE); - saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 | - SAA7134_RS_CONTROL_ME | - (dev->ts.pt_ts.dma >> 12)); } /* set task conditions + field handling */ diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c index 03488ba4c99c..b9817d74943f 100644 --- a/drivers/media/video/saa7134/saa7134-ts.c +++ b/drivers/media/video/saa7134/saa7134-ts.c @@ -250,6 +250,19 @@ int saa7134_ts_start(struct saa7134_dev *dev) BUG_ON(dev->ts_started); + /* dma: setup channel 5 (= TS) */ + saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff); + saa_writeb(SAA7134_TS_DMA1, + ((dev->ts.nr_packets - 1) >> 8) & 0xff); + /* TSNOPIT=0, TSCOLAP=0 */ + saa_writeb(SAA7134_TS_DMA2, + (((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00); + saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE); + saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 | + SAA7134_RS_CONTROL_ME | + (dev->ts.pt_ts.dma >> 12)); + + /* reset hardware TS buffers */ saa_writeb(SAA7134_TS_SERIAL1, 0x00); saa_writeb(SAA7134_TS_SERIAL1, 0x03); saa_writeb(SAA7134_TS_SERIAL1, 0x00); From 41e840b13e111ba18b138d055ddd250bd5ad5e39 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Wed, 2 Dec 2009 21:57:10 -0300 Subject: [PATCH 1021/1626] V4L/DVB (13699): [Mantis, MB86A16] Initial checkin: Mantis, MB86A16 Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a16.c | 1772 ++++++++++++++++++++ drivers/media/dvb/frontends/mb86a16.h | 38 + drivers/media/dvb/frontends/mb86a16_priv.h | 151 ++ drivers/media/dvb/mantis/Kconfig | 13 + drivers/media/dvb/mantis/Makefile | 7 + drivers/media/dvb/mantis/mantis_common.h | 135 ++ drivers/media/dvb/mantis/mantis_core.c | 215 +++ drivers/media/dvb/mantis/mantis_core.h | 61 + drivers/media/dvb/mantis/mantis_dma.c | 238 +++ drivers/media/dvb/mantis/mantis_dvb.c | 304 ++++ drivers/media/dvb/mantis/mantis_i2c.c | 189 +++ drivers/media/dvb/mantis/mantis_reg.h | 109 ++ drivers/media/dvb/mantis/mantis_vp1033.c | 151 ++ drivers/media/dvb/mantis/mantis_vp1033.h | 35 + drivers/media/dvb/mantis/mantis_vp1034.c | 52 + drivers/media/dvb/mantis/mantis_vp1034.h | 30 + drivers/media/dvb/mantis/mantis_vp2033.c | 73 + drivers/media/dvb/mantis/mantis_vp2033.h | 33 + drivers/media/dvb/mantis/mantis_vp3030.c | 53 + drivers/media/dvb/mantis/mantis_vp3030.h | 30 + 20 files changed, 3689 insertions(+) create mode 100644 drivers/media/dvb/frontends/mb86a16.c create mode 100644 drivers/media/dvb/frontends/mb86a16.h create mode 100644 drivers/media/dvb/frontends/mb86a16_priv.h create mode 100644 drivers/media/dvb/mantis/Kconfig create mode 100644 drivers/media/dvb/mantis/Makefile create mode 100644 drivers/media/dvb/mantis/mantis_common.h create mode 100644 drivers/media/dvb/mantis/mantis_core.c create mode 100644 drivers/media/dvb/mantis/mantis_core.h create mode 100644 drivers/media/dvb/mantis/mantis_dma.c create mode 100644 drivers/media/dvb/mantis/mantis_dvb.c create mode 100644 drivers/media/dvb/mantis/mantis_i2c.c create mode 100644 drivers/media/dvb/mantis/mantis_reg.h create mode 100644 drivers/media/dvb/mantis/mantis_vp1033.c create mode 100644 drivers/media/dvb/mantis/mantis_vp1033.h create mode 100644 drivers/media/dvb/mantis/mantis_vp1034.c create mode 100644 drivers/media/dvb/mantis/mantis_vp1034.h create mode 100644 drivers/media/dvb/mantis/mantis_vp2033.c create mode 100644 drivers/media/dvb/mantis/mantis_vp2033.h create mode 100644 drivers/media/dvb/mantis/mantis_vp3030.c create mode 100644 drivers/media/dvb/mantis/mantis_vp3030.h diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c new file mode 100644 index 000000000000..6a78a0c74036 --- /dev/null +++ b/drivers/media/dvb/frontends/mb86a16.c @@ -0,0 +1,1772 @@ +/* + Fujitsu MB86A16 DVB-S/DSS DC Receiver driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "mb86a16.h" +#include "mb86a16_priv.h" + +unsigned int verbose = 5; +module_param(verbose, int, 0644); + +#define ABS(x) ((x) < 0 ? (-x) : (x)) + +struct mb86a16_state { + struct i2c_adapter *i2c_adap; + const struct mb86a16_config *config; + struct dvb_frontend frontend; + u8 signal; + + // tuning parameters + int frequency; + int srate; + + // Internal stuff + int master_clk; + int deci; + int csel; + int rsel; +}; + +#define MB86A16_ERROR 0 +#define MB86A16_NOTICE 1 +#define MB86A16_INFO 2 +#define MB86A16_DEBUG 3 + +#define dprintk(x, y, z, format, arg...) do { \ + if (z) { \ + if ((x > MB86A16_ERROR) && (x > y)) \ + printk(KERN_ERR "%s: " format "\n", __func__, ##arg); \ + else if ((x > MB86A16_NOTICE) && (x > y)) \ + printk(KERN_NOTICE "%s: " format "\n", __func__, ##arg); \ + else if ((x > MB86A16_INFO) && (x > y)) \ + printk(KERN_INFO "%s: " format "\n", __func__, ##arg); \ + else if ((x > MB86A16_DEBUG) && (x > y)) \ + printk(KERN_DEBUG "%s: " format "\n", __func__, ##arg); \ + } else { \ + if (x > y) \ + printk(format, ##arg); \ + } \ +} while (0) + +#define TRACE_IN dprintk(verbose, MB86A16_DEBUG, 1, "-->()") +#define TRACE_OUT dprintk(verbose, MB86A16_DEBUG, 1, "()-->") + +static int mb86a16_write(struct mb86a16_state *state, u8 reg, u8 val) +{ + int ret; + u8 buf[] = { reg, val }; + + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + dprintk(verbose, MB86A16_DEBUG, 1, + "writing to [0x%02x],Reg[0x%02x],Data[0x%02x]", + state->config->demod_address, buf[0], buf[1]); + + ret = i2c_transfer(state->i2c_adap, &msg, 1); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int mb86a16_read(struct mb86a16_state *state, u8 reg, u8 *val) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 1 + },{ + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + ret = i2c_transfer(state->i2c_adap, msg, 2); + if (ret != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "read error(reg=0x%02x, ret=0x%i)", + reg, ret); + + return -EREMOTEIO; + } + *val = b1[0]; + + return ret; +} + +static int CNTM_set(struct mb86a16_state *state, + unsigned char timint1, + unsigned char timint2, + unsigned char cnext) +{ + unsigned char val; + + val = (timint1 << 4) | (timint2 << 2) | cnext; + if (mb86a16_write(state, MB86A16_CNTMR, val) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int smrt_set(struct mb86a16_state *state, int rate) +{ + int tmp ; + int m ; + unsigned char STOFS0, STOFS1; + + m = 1 << state->deci; + tmp = (8192 * state->master_clk - 2 * m * rate * 8192 + state->master_clk / 2) / state->master_clk; + + STOFS0 = tmp & 0x0ff; + STOFS1 = (tmp & 0xf00) >> 8; + + if (mb86a16_write(state, MB86A16_SRATE1, (state->deci << 2) | + (state->csel << 1) | + state->rsel) < 0) + goto err; + if (mb86a16_write(state, MB86A16_SRATE2, STOFS0) < 0) + goto err; + if (mb86a16_write(state, MB86A16_SRATE3, STOFS1) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -1; +} + +static int srst(struct mb86a16_state *state) +{ + if (mb86a16_write(state, MB86A16_RESET, 0x04) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + +} + +static int afcex_data_set(struct mb86a16_state *state, + unsigned char AFCEX_L, + unsigned char AFCEX_H) +{ + if (mb86a16_write(state, MB86A16_AFCEXL, AFCEX_L) < 0) + goto err; + if (mb86a16_write(state, MB86A16_AFCEXH, AFCEX_H) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + + return -1; +} + +static int afcofs_data_set(struct mb86a16_state *state, + unsigned char AFCEX_L, + unsigned char AFCEX_H) +{ + if (mb86a16_write(state, 0x58, AFCEX_L) < 0) + goto err; + if (mb86a16_write(state, 0x59, AFCEX_H) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int stlp_set(struct mb86a16_state *state, + unsigned char STRAS, + unsigned char STRBS) +{ + if (mb86a16_write(state, MB86A16_STRFILTCOEF1, (STRBS << 3) | (STRAS)) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int Vi_set(struct mb86a16_state *state, unsigned char ETH, unsigned char VIA) +{ + if (mb86a16_write(state, MB86A16_VISET2, 0x04) < 0) + goto err; + if (mb86a16_write(state, MB86A16_VISET3, 0xf5) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int initial_set(struct mb86a16_state *state) +{ + if (stlp_set(state, 5, 7)) + goto err; + if (afcex_data_set(state, 0, 0)) + goto err; + if (afcofs_data_set(state, 0, 0)) + goto err; + + if (mb86a16_write(state, MB86A16_CRLFILTCOEF1, 0x16) < 0) + goto err; + if (mb86a16_write(state, 0x2f, 0x21) < 0) + goto err; + if (mb86a16_write(state, MB86A16_VIMAG, 0x38) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS1, 0x00) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS2, 0x1c) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS3, 0x20) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS4, 0x1e) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS5, 0x23) < 0) + goto err; + if (mb86a16_write(state, 0x54, 0xff) < 0) + goto err; + if (mb86a16_write(state, MB86A16_TSOUT, 0x00) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int S01T_set(struct mb86a16_state *state, + unsigned char s1t, + unsigned s0t) +{ + if (mb86a16_write(state, 0x33, (s1t << 3) | s0t) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + + +static int EN_set(struct mb86a16_state *state, + int cren, + int afcen) +{ + unsigned char val; + + val = 0x7a | (cren << 7) | (afcen << 2); + if (mb86a16_write(state, 0x49, val) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int AFCEXEN_set(struct mb86a16_state *state, + int afcexen, + int smrt) +{ + unsigned char AFCA ; + + if (smrt > 18875) + AFCA = 4; + else if (smrt > 9375) + AFCA = 3; + else if (smrt > 2250) + AFCA = 2; + else + AFCA = 1; + + if (mb86a16_write(state, 0x2a, 0x02 | (afcexen << 5) | (AFCA << 2)) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int DAGC_data_set(struct mb86a16_state *state, + unsigned char DAGCA, + unsigned char DAGCW) +{ + if (mb86a16_write(state, 0x2d, (DAGCA << 3) | DAGCW) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static void smrt_info_get(struct mb86a16_state *state, int rate) +{ + if (rate >= 37501) { + state->deci = 0; state->csel = 0; state->rsel = 0; + } else if (rate >= 30001) { + state->deci = 0; state->csel = 0; state->rsel = 1; + } else if (rate >= 26251) { + state->deci = 0; state->csel = 1; state->rsel = 0; + } else if (rate >= 22501) { + state->deci = 0; state->csel = 1; state->rsel = 1; + } else if (rate >= 18751) { + state->deci = 1; state->csel = 0; state->rsel = 0; + } else if (rate >= 15001) { + state->deci = 1; state->csel = 0; state->rsel = 1; + } else if (rate >= 13126) { + state->deci = 1; state->csel = 1; state->rsel = 0; + } else if (rate >= 11251) { + state->deci = 1; state->csel = 1; state->rsel = 1; + } else if (rate >= 9376) { + state->deci = 2; state->csel = 0; state->rsel = 0; + } else if (rate >= 7501) { + state->deci = 2; state->csel = 0; state->rsel = 1; + } else if (rate >= 6563) { + state->deci = 2; state->csel = 1; state->rsel = 0; + } else if (rate >= 5626) { + state->deci = 2; state->csel = 1; state->rsel = 1; + } else if (rate >= 4688) { + state->deci = 3; state->csel = 0; state->rsel = 0; + } else if (rate >= 3751) { + state->deci = 3; state->csel = 0; state->rsel = 1; + } else if (rate >= 3282) { + state->deci = 3; state->csel = 1; state->rsel = 0; + } else if (rate >= 2814) { + state->deci = 3; state->csel = 1; state->rsel = 1; + } else if (rate >= 2344) { + state->deci = 4; state->csel = 0; state->rsel = 0; + } else if (rate >= 1876) { + state->deci = 4; state->csel = 0; state->rsel = 1; + } else if (rate >= 1641) { + state->deci = 4; state->csel = 1; state->rsel = 0; + } else if (rate >= 1407) { + state->deci = 4; state->csel = 1; state->rsel = 1; + } else if (rate >= 1172) { + state->deci = 5; state->csel = 0; state->rsel = 0; + } else if (rate >= 939) { + state->deci = 5; state->csel = 0; state->rsel = 1; + } else if (rate >= 821) { + state->deci = 5; state->csel = 1; state->rsel = 0; + } else { + state->deci = 5; state->csel = 1; state->rsel = 1; + } + + if (state->csel == 0) + state->master_clk = 92000; + else + state->master_clk = 61333; + +} + +static int signal_det(struct mb86a16_state *state, + int smrt, + unsigned char *SIG) +{ + + int ret ; + int smrtd ; + int wait_sym ; + int wait_t ; + unsigned char S[3] ; + int i ; + + if (*SIG > 45) { + if (CNTM_set(state, 2, 1, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error"); + return -1; + } + wait_sym = 40000; + } else { + if (CNTM_set(state, 3, 1, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error"); + return -1; + } + wait_sym = 80000; + } + for (i = 0; i < 3; i++) { + if (i == 0 ) + smrtd = smrt * 98 / 100; + else if (i == 1) + smrtd = smrt; + else + smrtd = smrt * 102 / 100; + smrt_info_get(state, smrtd); + smrt_set(state, smrtd); + srst(state); + wait_t = (wait_sym + 99 * smrtd / 100) / smrtd; + if (wait_t == 0) + wait_t = 1; + msleep_interruptible(10); + if (mb86a16_read(state, 0x37, &(S[i])) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + } + if ((S[1] > S[0] * 112 / 100) && + (S[1] > S[2] * 112 / 100)) { + + ret = 1; + } else { + ret = 0; + } + *SIG = S[1]; + + if (CNTM_set(state, 0, 1, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error"); + return -1; + } + + return ret; +} + +static int rf_val_set(struct mb86a16_state *state, + int f, + int smrt, + unsigned char R) +{ + unsigned char C, F, B; + int M; + unsigned char rf_val[5]; + int ack = -1; + + if (smrt > 37750 ) + C = 1; + else if (smrt > 18875) + C = 2; + else if (smrt > 5500 ) + C = 3; + else + C = 4; + + if (smrt > 30500) + F = 3; + else if (smrt > 9375) + F = 1; + else if (smrt > 4625) + F = 0; + else + F = 2; + + if (f < 1060) + B = 0; + else if (f < 1175) + B = 1; + else if (f < 1305) + B = 2; + else if (f < 1435) + B = 3; + else if (f < 1570) + B = 4; + else if (f < 1715) + B = 5; + else if (f < 1845) + B = 6; + else if (f < 1980) + B = 7; + else if (f < 2080) + B = 8; + else + B = 9; + + M = f * (1 << R) / 2; + + rf_val[0] = 0x01 | (C << 3) | (F << 1); + rf_val[1] = (R << 5) | ((M & 0x1f000) >> 12); + rf_val[2] = (M & 0x00ff0) >> 4; + rf_val[3] = ((M & 0x0000f) << 4) | B; + + // Frequency Set + if (mb86a16_write(state, 0x21, rf_val[0]) < 0) + ack = 0; + if (mb86a16_write(state, 0x22, rf_val[1]) < 0) + ack = 0; + if (mb86a16_write(state, 0x23, rf_val[2]) < 0) + ack = 0; + if (mb86a16_write(state, 0x24, rf_val[3]) < 0) + ack = 0; + if (mb86a16_write(state, 0x25, 0x01) < 0) + ack = 0; + if (ack == 0) { + dprintk(verbose, MB86A16_ERROR, 1, "RF Setup - I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int afcerr_chk(struct mb86a16_state *state) +{ + unsigned char AFCM_L, AFCM_H ; + int AFCM ; + int afcm, afcerr ; + + if (mb86a16_read(state, 0x0e, &AFCM_L) != 2) + goto err; + if (mb86a16_read(state, 0x0f, &AFCM_H) != 2) + goto err; + + AFCM = (AFCM_H << 8) + AFCM_L; + + if (AFCM > 2048) + afcm = AFCM - 4096; + else + afcm = AFCM; + afcerr = afcm * state->master_clk / 8192; + + return afcerr; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int dagcm_val_get(struct mb86a16_state *state) +{ + int DAGCM; + unsigned char DAGCM_H, DAGCM_L; + + if (mb86a16_read(state, 0x45, &DAGCM_L) != 2) + goto err; + if (mb86a16_read(state, 0x46, &DAGCM_H) != 2) + goto err; + + DAGCM = (DAGCM_H << 8) + DAGCM_L; + + return DAGCM; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int mb86a16_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct mb86a16_state *state = fe->demodulator_priv; + + if (state->signal & 0x02) + *status |= FE_HAS_VITERBI; + if (state->signal & 0x01) + *status |= FE_HAS_SYNC; + if (state->signal & 0x03) + *status |= FE_HAS_LOCK; + + return 0; +} + +static int sync_chk(struct mb86a16_state *state, + unsigned char *VIRM) +{ + unsigned char val; + int sync; + + if (mb86a16_read(state, 0x0d, &val) != 2) + goto err; + + dprintk(verbose, MB86A16_INFO, 1, "Status = %02x,", val); + sync = val & 0x01; + *VIRM = (val & 0x1c) >> 2; + + return sync; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + +} + +static int freqerr_chk(struct mb86a16_state *state, + int fTP, + int smrt, + int unit) +{ + unsigned char CRM, AFCML, AFCMH; + unsigned char temp1, temp2, temp3; + int crm, afcm, AFCM; + int crrerr, afcerr; // [kHz] + int frqerr; // [MHz] + int afcen, afcexen = 0; + int R, M, fOSC, fOSC_OFS; + + if (mb86a16_read(state, 0x43, &CRM) != 2) + goto err; + + if (CRM > 127) + crm = CRM - 256; + else + crm = CRM; + + crrerr = smrt * crm / 256; + if (mb86a16_read(state, 0x49, &temp1) != 2) + goto err; + + afcen = (temp1 & 0x04) >> 2; + if (afcen == 0) { + if (mb86a16_read(state, 0x2a, &temp1) != 2) + goto err; + afcexen = (temp1 & 0x20) >> 5; + } + + if (afcen == 1) { + if (mb86a16_read(state, 0x0e, &AFCML) != 2) + goto err; + if (mb86a16_read(state, 0x0f, &AFCMH) != 2) + goto err; + } else if (afcexen == 1) { + if (mb86a16_read(state, 0x2b, &AFCML) != 2) + goto err; + if (mb86a16_read(state, 0x2c, &AFCMH) != 2) + goto err; + } + if ((afcen == 1) || (afcexen == 1)) { + smrt_info_get(state, smrt); + AFCM = ((AFCMH & 0x01) << 8) + AFCML; + if (AFCM > 255) + afcm = AFCM - 512; + else + afcm = AFCM; + + afcerr = afcm * state->master_clk / 8192; + } else + afcerr = 0; + + if (mb86a16_read(state, 0x22, &temp1) != 2) + goto err; + if (mb86a16_read(state, 0x23, &temp2) != 2) + goto err; + if (mb86a16_read(state, 0x24, &temp3) != 2) + goto err; + + R = (temp1 & 0xe0) >> 5; + M = ((temp1 & 0x1f) << 12) + (temp2 << 4) + (temp3 >> 4); + if (R == 0) + fOSC = 2 * M; + else + fOSC = M; + + fOSC_OFS = fOSC - fTP; + + if (unit == 0) { //[MHz] + if (crrerr + afcerr + fOSC_OFS * 1000 >= 0) + frqerr = (crrerr + afcerr + fOSC_OFS * 1000 + 500) / 1000; + else + frqerr = (crrerr + afcerr + fOSC_OFS * 1000 - 500) / 1000; + } else { //[kHz] + frqerr = crrerr + afcerr + fOSC_OFS * 1000; + } + + return frqerr; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static unsigned char vco_dev_get(struct mb86a16_state *state, int smrt) +{ + unsigned char R; + + if (smrt > 9375) + R = 0; + else + R = 1; + + return R; +} + +static void swp_info_get(struct mb86a16_state *state, + int fOSC_start, + int smrt, + int v, int R, + int swp_ofs, + int *fOSC, + int *afcex_freq, + unsigned char *AFCEX_L, + unsigned char *AFCEX_H) +{ + int AFCEX ; + int crnt_swp_freq ; + + crnt_swp_freq = fOSC_start * 1000 + v * swp_ofs; + + if (R == 0 ) + *fOSC = (crnt_swp_freq + 1000) / 2000 * 2; + else + *fOSC = (crnt_swp_freq + 500) / 1000; + + if (*fOSC >= crnt_swp_freq) + *afcex_freq = *fOSC *1000 - crnt_swp_freq; + else + *afcex_freq = crnt_swp_freq - *fOSC * 1000; + + AFCEX = *afcex_freq * 8192 / state->master_clk; + *AFCEX_L = AFCEX & 0x00ff; + *AFCEX_H = (AFCEX & 0x0f00) >> 8; +} + + +static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V, int vmax, int vmin, + int SIGMIN, int fOSC, int afcex_freq, int swp_ofs, unsigned char *SIG1) +{ + int swp_freq ; + + if ((i % 2 == 1) && (v <= vmax)) { + // positive v (case 1) + if ((v - 1 == vmin) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v - 1) >= 0) && + (*(V + 30 + v - 1) > *(V + 30 + v)) && + (*(V + 30 + v - 1) > SIGMIN)) { + + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs; + *SIG1 = *(V + 30 + v - 1); + } else if ((v == vmax) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v - 1) >= 0) && + (*(V + 30 + v) > *(V + 30 + v - 1)) && + (*(V + 30 + v) > SIGMIN)) { + // (case 2) + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else if ((*(V + 30 + v) > 0) && + (*(V + 30 + v - 1) > 0) && + (*(V + 30 + v - 2) > 0) && + (*(V + 30 + v - 3) > 0) && + (*(V + 30 + v - 1) > *(V + 30 + v)) && + (*(V + 30 + v - 2) > *(V + 30 + v - 3)) && + ((*(V + 30 + v - 1) > SIGMIN) || + (*(V + 30 + v - 2) > SIGMIN))) { + // (case 3) + if (*(V + 30 + v - 1) >= *(V + 30 + v - 2)) { + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs; + *SIG1 = *(V + 30 + v - 1); + } else { + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs * 2; + *SIG1 = *(V + 30 + v - 2); + } + } else if ((v == vmax) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v - 1) >= 0) && + (*(V + 30 + v - 2) >= 0) && + (*(V + 30 + v) > *(V + 30 + v - 2)) && + (*(V + 30 + v - 1) > *(V + 30 + v - 2)) && + ((*(V + 30 + v) > SIGMIN) || + (*(V + 30 + v - 1) > SIGMIN))) { + // (case 4) + if (*(V + 30 + v) >= *(V + 30 + v - 1)) { + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else { + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs; + *SIG1 = *(V + 30 + v - 1); + } + } else { + swp_freq = -1 ; + } + } else if ((i % 2 == 0) && (v >= vmin)) { + // Negative v (case 1) + if ((*(V + 30 + v) > 0) && + (*(V + 30 + v + 1) > 0) && + (*(V + 30 + v + 2) > 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 1) > *(V + 30 + v + 2)) && + (*(V + 30 + v + 1) > SIGMIN)) { + + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } else if ((v + 1 == vmax) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 1) > SIGMIN)) { + // (case 2) + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v); + } else if ((v == vmin) && + (*(V + 30 + v) > 0) && + (*(V + 30 + v + 1) > 0) && + (*(V + 30 + v + 2) > 0) && + (*(V + 30 + v) > *(V + 30 + v + 1)) && + (*(V + 30 + v) > *(V + 30 + v + 2)) && + (*(V + 30 + v) > SIGMIN)) { + // (case 3) + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else if ((*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 2) >= 0) && + (*(V +30 + v + 3) >= 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 2) > *(V + 30 + v + 3)) && + ((*(V + 30 + v + 1) > SIGMIN) || + (*(V + 30 + v + 2) > SIGMIN))) { + // (case 4) + if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } else { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2; + *SIG1 = *(V + 30 + v + 2); + } + } else if ((*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 2) >= 0) && + (*(V + 30 + v + 3) >= 0) && + (*(V + 30 + v) > *(V + 30 + v + 2)) && + (*(V + 30 + v + 1) > *(V + 30 + v + 2)) && + (*(V + 30 + v) > *(V + 30 + v + 3)) && + (*(V + 30 + v + 1) > *(V + 30 + v + 3)) && + ((*(V + 30 + v) > SIGMIN) || + (*(V + 30 + v + 1) > SIGMIN))) { + // (case 5) + if (*(V + 30 + v) >= *(V + 30 + v + 1)) { + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } + } else if ((v + 2 == vmin) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 2) >= 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 2) > *(V + 30 + v)) && + ((*(V + 30 + v + 1) > SIGMIN) || + (*(V + 30 + v + 2) > SIGMIN))) { + // (case 6) + if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } else { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2; + *SIG1 = *(V + 30 + v + 2); + } + } else if ((vmax == 0) && (vmin == 0) && (*(V + 30 + v) > SIGMIN)) { + swp_freq = fOSC * 1000; + *SIG1 = *(V + 30 + v); + } else swp_freq = -1; + } else swp_freq = -1; + + return swp_freq; +} + +static void swp_info_get2(struct mb86a16_state *state, + int smrt, + int R, + int swp_freq, + int *afcex_freq, + int *fOSC, + unsigned char *AFCEX_L, + unsigned char *AFCEX_H) +{ + int AFCEX ; + + if (R == 0) + *fOSC = (swp_freq + 1000) / 2000 * 2; + else + *fOSC = (swp_freq + 500) / 1000; + + if (*fOSC >= swp_freq) + *afcex_freq = *fOSC * 1000 - swp_freq; + else + *afcex_freq = swp_freq - *fOSC * 1000; + + AFCEX = *afcex_freq * 8192 / state->master_clk; + *AFCEX_L = AFCEX & 0x00ff; + *AFCEX_H = (AFCEX & 0x0f00) >> 8; +} + +static void afcex_info_get(struct mb86a16_state *state, + int afcex_freq, + unsigned char *AFCEX_L, + unsigned char *AFCEX_H) +{ + int AFCEX ; + + AFCEX = afcex_freq * 8192 / state->master_clk; + *AFCEX_L = AFCEX & 0x00ff; + *AFCEX_H = (AFCEX & 0x0f00) >> 8; +} + +static int SEQ_set(struct mb86a16_state *state, unsigned char loop) +{ + // SLOCK0 = 0 + if (mb86a16_write(state, 0x32, 0x02 | (loop << 2)) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int iq_vt_set(struct mb86a16_state *state, unsigned char IQINV) +{ + // Viterbi Rate, IQ Settings + if (mb86a16_write(state, 0x06, 0xdf | (IQINV << 5)) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int FEC_srst(struct mb86a16_state *state) +{ + if (mb86a16_write(state, MB86A16_RESET, 0x02) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int S2T_set(struct mb86a16_state *state, unsigned char S2T) +{ + if (mb86a16_write(state, 0x34, 0x70 | S2T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int S45T_set(struct mb86a16_state *state, unsigned char S4T, unsigned char S5T) +{ + if (mb86a16_write(state, 0x35, 0x00 | (S5T << 4) | S4T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + + +static int mb86a16_set_fe(struct mb86a16_state *state) +{ + u8 agcval, cnmval; + + int i, j; + int fOSC = 0; + int fOSC_start = 0; + int wait_t; + int fcp; + int swp_ofs; + int V[60]; + u8 SIG1MIN; + + unsigned char CREN, AFCEN, AFCEXEN; + unsigned char SIG1; + unsigned char TIMINT1, TIMINT2, TIMEXT; + unsigned char S0T, S1T; + unsigned char S2T; +// unsigned char S2T, S3T; + unsigned char S4T, S5T; + unsigned char AFCEX_L, AFCEX_H; + unsigned char R; + unsigned char VIRM; + unsigned char ETH, VIA; + unsigned char junk; + + int loop; + int ftemp; + int v, vmax, vmin; + int vmax_his, vmin_his; + int swp_freq, prev_swp_freq[20]; + int prev_freq_num; + int signal_dupl; + int afcex_freq; + int signal; + int afcerr; + int temp_freq, delta_freq; + int dagcm[4]; + int smrt_d; +// int freq_err; + int n; + int ret = -1; + int sync; + + dprintk(verbose, MB86A16_INFO, 1, "freq=%d Mhz, symbrt=%d Ksps", state->frequency, state->srate); + + fcp = 5000; // (carrier recovery [kHz]) +// fcp = 3000; + swp_ofs = state->srate / 4; + + for (i = 0; i < 60; i++) + V[i] = -1; + + for (i = 0; i < 20; i++) + prev_swp_freq[i] = 0; + + SIG1MIN = 25; + + for (n = 0; ((n < 3) && (ret == -1)); n++) { + SEQ_set(state, 0); + iq_vt_set(state, 0); + + CREN = 0; + AFCEN = 0; + AFCEXEN = 1; + TIMINT1 = 0; + TIMINT2 = 1; + TIMEXT = 2; + S1T = 0; + S0T = 0; + + if (initial_set(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "initial set failed"); + return -1; + } + if (DAGC_data_set(state, 3, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error"); + return -1; + } + if (EN_set(state, CREN, AFCEN) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "EN set error"); + return -1; // (0, 0) + } + if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; // (1, smrt) = (1, symbolrate) + } + if (CNTM_set(state, TIMINT1, TIMINT2, TIMEXT) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set error"); + return -1; // (0, 1, 2) + } + if (S01T_set(state, S1T, S0T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "S01T set error"); + return -1; // (0, 0) + } + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt info get error"); + return -1; + } + + R = vco_dev_get(state, state->srate); + if (R == 1) + fOSC_start = state->frequency; + + else if (R == 0) { + if (state->frequency % 2 == 0) { + fOSC_start = state->frequency; + } else { + fOSC_start = state->frequency + 1; + if (fOSC_start > 2150) + fOSC_start = state->frequency - 1; + } + } + loop = 1; + ftemp = fOSC_start * 1000; + vmax = 0 ; + while (loop == 1) { + ftemp = ftemp + swp_ofs; + vmax++; + + // Upper bound + if (ftemp > 2150000) { + loop = 0; + vmax--; + } + else if ((ftemp == 2150000) || (ftemp - state->frequency * 1000 >= fcp + state->srate / 4)) + loop = 0; + } + + loop = 1; + ftemp = fOSC_start * 1000; + vmin = 0 ; + while (loop == 1) { + ftemp = ftemp - swp_ofs; + vmin--; + + // Lower bound + if (ftemp < 950000) { + loop = 0; + vmin++; + } + else if ((ftemp == 950000) || (state->frequency * 1000 - ftemp >= fcp + state->srate / 4)) + loop = 0; + } + + wait_t = (8000 + state->srate / 2) / state->srate; + if (wait_t == 0) + wait_t = 1; + + i = 0; + j = 0; + prev_freq_num = 0; + loop = 1; + signal = 0; + vmax_his = 0; + vmin_his = 0; + v = 0; + + while (loop == 1) { + swp_info_get(state, fOSC_start, state->srate, + v, R, swp_ofs, &fOSC, + &afcex_freq, &AFCEX_L, &AFCEX_H); + + if (rf_val_set(state, fOSC, state->srate, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + if (srst(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "srst error"); + return -1; + } + msleep_interruptible(wait_t); + + if (mb86a16_read(state, 0x37, &SIG1) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -1; + } + V[30 + v] = SIG1 ; + swp_freq = swp_freq_calcuation(state, i, v, V, vmax, vmin, + SIG1MIN, fOSC, afcex_freq, + swp_ofs, &SIG1); //changed + + signal_dupl = 0; + for (j = 0; j < prev_freq_num; j++) { + if ((ABS(prev_swp_freq[j] - swp_freq)) < (swp_ofs * 3 / 2)) { + signal_dupl = 1; + dprintk(verbose, MB86A16_INFO, 1, "Probably Duplicate Signal, j = %d", j); + } + } + if ((signal_dupl == 0) && (swp_freq > 0) && (ABS(swp_freq - state->frequency * 1000) < fcp + state->srate / 6)) { + dprintk(verbose, MB86A16_DEBUG, 1, "------ Signal detect ------ [swp_freq=[%07d, srate=%05d]]", swp_freq, state->srate); + prev_swp_freq[prev_freq_num] = swp_freq; + prev_freq_num++; + swp_info_get2(state, state->srate, R, swp_freq, + &afcex_freq, &fOSC, + &AFCEX_L, &AFCEX_H); + + if (rf_val_set(state, fOSC, state->srate, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + signal = signal_det(state, state->srate, &SIG1); + if (signal == 1) { + dprintk(verbose, MB86A16_ERROR, 1, "***** Signal Found *****"); + loop = 0; + } else { + dprintk(verbose, MB86A16_ERROR, 1, "!!!!! No signal !!!!!, try again..."); + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + } + } + if (v > vmax) + vmax_his = 1 ; + if (v < vmin) + vmin_his = 1 ; + i++; + + if ((i % 2 == 1) && (vmax_his == 1)) + i++; + if ((i % 2 == 0) && (vmin_his == 1)) + i++; + + if (i % 2 == 1) + v = (i + 1) / 2; + else + v = -i / 2; + + if ((vmax_his == 1) && (vmin_his == 1)) + loop = 0 ; + } + + if (signal == 1) { + dprintk(verbose, MB86A16_INFO, 1, " Start Freq Error Check"); + S1T = 7 ; + S0T = 1 ; + CREN = 0 ; + AFCEN = 1 ; + AFCEXEN = 0 ; + + if (S01T_set(state, S1T, S0T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "S01T set error"); + return -1; + } + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + if (EN_set(state, CREN, AFCEN) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "EN set error"); + return -1; + } + if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; + } + afcex_info_get(state, afcex_freq, &AFCEX_L, &AFCEX_H); + if (afcofs_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCOFS data set error"); + return -1; + } + if (srst(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "srst error"); + return -1; + } + // delay 4~200 + wait_t = 200000 / state->master_clk + 200000 / state->srate; + msleep(wait_t); + afcerr = afcerr_chk(state); + if (afcerr == -1) + return -1; + + swp_freq = fOSC * 1000 + afcerr ; + AFCEXEN = 1 ; + if (state->srate >= 1500) + smrt_d = state->srate / 3; + else + smrt_d = state->srate / 2; + smrt_info_get(state, smrt_d); + if (smrt_set(state, smrt_d) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + if (AFCEXEN_set(state, AFCEXEN, smrt_d) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; + } + R = vco_dev_get(state, smrt_d); + if (DAGC_data_set(state, 2, 0) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error"); + return -1; + } + for (i = 0; i < 3; i++) { + temp_freq = swp_freq + (i - 1) * state->srate / 8; + swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, smrt_d, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + wait_t = 200000 / state->master_clk + 40000 / smrt_d; + msleep(wait_t); + dagcm[i] = dagcm_val_get(state); + } + if ((dagcm[0] > dagcm[1]) && + (dagcm[0] > dagcm[2]) && + (dagcm[0] - dagcm[1] > 2 * (dagcm[2] - dagcm[1]))) { + + temp_freq = swp_freq - 2 * state->srate / 8; + swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, smrt_d, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set"); + return -1; + } + wait_t = 200000 / state->master_clk + 40000 / smrt_d; + msleep(wait_t); + dagcm[3] = dagcm_val_get(state); + if (dagcm[3] > dagcm[1]) + delta_freq = (dagcm[2] - dagcm[0] + dagcm[1] - dagcm[3]) * state->srate / 300; + else + delta_freq = 0; + } else if ((dagcm[2] > dagcm[1]) && + (dagcm[2] > dagcm[0]) && + (dagcm[2] - dagcm[1] > 2 * (dagcm[0] - dagcm[1]))) { + + temp_freq = swp_freq + 2 * state->srate / 8; + swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, smrt_d, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set"); + return -1; + } + wait_t = 200000 / state->master_clk + 40000 / smrt_d; + msleep(wait_t); + dagcm[3] = dagcm_val_get(state); + if (dagcm[3] > dagcm[1]) + delta_freq = (dagcm[2] - dagcm[0] + dagcm[3] - dagcm[1]) * state->srate / 300; + else + delta_freq = 0 ; + + } else { + delta_freq = 0 ; + } + dprintk(verbose, MB86A16_INFO, 1, "SWEEP Frequency = %d", swp_freq); + swp_freq += delta_freq; + dprintk(verbose, MB86A16_INFO, 1, "Adjusting .., DELTA Freq = %d, SWEEP Freq=%d", delta_freq, swp_freq); + if (ABS(state->frequency * 1000 - swp_freq) > 3800) { + dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL !"); + } else { + + S1T = 0; + S0T = 3; + CREN = 1; + AFCEN = 0; + AFCEXEN = 1; + + if (S01T_set(state, S1T, S0T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "S01T set error"); + return -1; + } + if (DAGC_data_set(state, 0, 0) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error"); + return -1; + } + R = vco_dev_get(state, state->srate); + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + if (EN_set(state, CREN, AFCEN) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "EN set error"); + return -1; + } + if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; + } + swp_info_get2(state, state->srate, R, swp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, state->srate, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + if (srst(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "srst error"); + return -1; + } + wait_t = 7 + (10000 + state->srate / 2) / state->srate; + if (wait_t == 0) + wait_t = 1; + msleep_interruptible(wait_t); + if (mb86a16_read(state, 0x37, &SIG1) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + if (SIG1 > 110) { + S2T = 4; S4T = 1; S5T = 6; ETH = 4; VIA = 6; + wait_t = 7 + (917504 + state->srate / 2) / state->srate; + } else if (SIG1 > 105) { + S2T = 4; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (1048576 + state->srate / 2) / state->srate; + } else if (SIG1 > 85) { + S2T = 5; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (1310720 + state->srate / 2) / state->srate; + } else if (SIG1 > 65) { + S2T = 6; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (1572864 + state->srate / 2) / state->srate; + } else { + S2T = 7; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (2097152 + state->srate / 2) / state->srate; + } + S2T_set(state, S2T); + S45T_set(state, S4T, S5T); + Vi_set(state, ETH, VIA); + srst(state); + msleep_interruptible(wait_t); + sync = sync_chk(state, &VIRM); + dprintk(verbose, MB86A16_INFO, 1, "-------- Viterbi=[%d] SYNC=[%d] ---------", VIRM, sync); + if (mb86a16_read(state, 0x0d, &state->signal) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + if (VIRM) { + if (VIRM == 4) { // 5/6 + if (SIG1 > 110) + wait_t = ( 786432 + state->srate / 2) / state->srate; + else + wait_t = (1572864 + state->srate / 2) / state->srate; + if (state->srate < 5000) + // FIXME ! , should be a long wait ! + msleep_interruptible(wait_t); + else + msleep_interruptible(wait_t); + + if (sync_chk(state, &junk) == 0) { + iq_vt_set(state, 1); + FEC_srst(state); + } + if (SIG1 > 110) + wait_t = ( 786432 + state->srate / 2) / state->srate; + else + wait_t = (1572864 + state->srate / 2) / state->srate; + + msleep_interruptible(wait_t); + SEQ_set(state, 1); + } else { // 1/2, 2/3, 3/4, 7/8 + if (SIG1 > 110) + wait_t = ( 786432 + state->srate / 2) / state->srate; + else + wait_t = (1572864 + state->srate / 2) / state->srate; + + msleep_interruptible(wait_t); + SEQ_set(state, 1); + } + } else { + dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL"); + SEQ_set(state, 1); + } + } + } else { + dprintk (verbose, MB86A16_INFO, 1, "NO -- SIGNAL"); + } + + sync = sync_chk(state, &junk); + if (sync) { + dprintk(verbose, MB86A16_INFO, 1, "******* SYNC *******"); + freqerr_chk(state, state->frequency, state->srate, 1); + } + } + + mb86a16_read(state, 0x15, &agcval); + mb86a16_read(state, 0x26, &cnmval); + dprintk(verbose, MB86A16_INFO, 1, "AGC = %02x CNM = %02x", agcval, cnmval); + + return ret; +} + +static int mb86a16_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *cmd) +{ + struct mb86a16_state *state = fe->demodulator_priv; + int i; + u8 regs; + + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0) + goto err; + if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0) + goto err; + + regs = 0x18; + + if (cmd->msg_len > 5 || cmd->msg_len < 4) + return -EINVAL; + + for (i = 0; i < cmd->msg_len; i++) { + if (mb86a16_write(state, regs, cmd->msg[i]) < 0) + goto err; + + regs++; + } + i += 0x90; + + msleep_interruptible(10); + + if (mb86a16_write(state, MB86A16_DCC1, i) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int mb86a16_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst) +{ + struct mb86a16_state *state = fe->demodulator_priv; + + switch (burst) { + case SEC_MINI_A: + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA | + MB86A16_DCC1_TBEN | + MB86A16_DCC1_TBO) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + break; + case SEC_MINI_B: + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA | + MB86A16_DCC1_TBEN) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + break; + } + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int mb86a16_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct mb86a16_state *state = fe->demodulator_priv; + + switch (tone) { + case SEC_TONE_ON: + if (mb86a16_write(state, MB86A16_TONEOUT2, 0x00) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA | + MB86A16_DCC1_CTOE) < 0) + + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + break; + case SEC_TONE_OFF: + if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0) + goto err; + break; + default: + return -EINVAL; + } + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +#define MB86A16_FE_ALGO 1 + +static int mb86a16_frontend_algo(struct dvb_frontend *fe) +{ + return MB86A16_FE_ALGO; +} + +static int mb86a16_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p, + unsigned int mode_flags, + int *delay, + fe_status_t *status) +{ + int ret = 0; + struct mb86a16_state *state = fe->demodulator_priv; + + if (p != NULL) { + state->frequency = p->frequency / 1000; + state->srate = p->u.qpsk.symbol_rate / 1000; + ret = mb86a16_set_fe(state); + } + if (!(mode_flags & FE_TUNE_MODE_ONESHOT)) + mb86a16_read_status(fe, status); + + *delay = HZ/3000; + + return ret; +} + +static void mb86a16_release(struct dvb_frontend *fe) +{ + struct mb86a16_state *state = fe->demodulator_priv; + kfree(state); +} + +static int mb86a16_init(struct dvb_frontend *fe) +{ + return 0; +} + +static int mb86a16_sleep(struct dvb_frontend *fe) +{ + return 0; +} + +static int mb86a16_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + return 0; +} + +static int mb86a16_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + *strength = 0; + + return 0; +} + +struct cnr { + u8 cn_reg; + u8 cn_val; +}; + +static const struct cnr cnr_tab[] = { + { 35, 2 }, + { 40, 3 }, + { 50, 4 }, + { 60, 5 }, + { 70, 6 }, + { 80, 7 }, + { 92, 8 }, + { 103, 9 }, + { 115, 10 }, + { 138, 12 }, + { 162, 15 }, + { 180, 18 }, + { 185, 19 }, + { 189, 20 }, + { 195, 22 }, + { 199, 24 }, + { 201, 25 }, + { 202, 26 }, + { 203, 27 }, + { 205, 28 }, + { 208, 30 } +}; + +static int mb86a16_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct mb86a16_state *state = fe->demodulator_priv; + int i = 0; + int low_tide = 2, high_tide = 30, q_level; + u8 cn; + + if (mb86a16_read(state, 0x26, &cn) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + for (i = 0; i < ARRAY_SIZE(cnr_tab); i++) { + if (cn < cnr_tab[i].cn_reg) { + *snr = cnr_tab[i].cn_val; + break; + } + } + q_level = (*snr * 100) / (high_tide - low_tide); + dprintk(verbose, MB86A16_ERROR, 1, "SNR (Quality) = [%d dB], Level=%d %%", *snr, q_level); + + return 0; +} + +static int mb86a16_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + return 0; +} + +static struct dvb_frontend_ops mb86a16_ops = { + .info = { + .name = "Fujitsu MB86A16 DVB-S", + .type = FE_QPSK, + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 125, + .frequency_tolerance = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | FE_CAN_QPSK | + FE_CAN_FEC_AUTO + }, + .release = mb86a16_release, + .tune = mb86a16_set_frontend, + .read_status = mb86a16_read_status, + .get_frontend_algo = mb86a16_frontend_algo, + .init = mb86a16_init, + .sleep = mb86a16_sleep, + .read_status = mb86a16_read_status, + + .read_ber = mb86a16_read_ber, + .read_signal_strength = mb86a16_read_signal_strength, + .read_snr = mb86a16_read_snr, + .read_ucblocks = mb86a16_read_ucblocks, + + .diseqc_send_master_cmd = mb86a16_send_diseqc_msg, + .diseqc_send_burst = mb86a16_send_diseqc_burst, + .set_tone = mb86a16_set_tone, +}; + +struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, + struct i2c_adapter *i2c_adap) +{ + u8 dev_id = 0; + struct mb86a16_state *state = NULL; + + state = kmalloc(sizeof (struct mb86a16_state), GFP_KERNEL); + if (state == NULL) + goto error; + + state->config = config; + state->i2c_adap = i2c_adap; + + mb86a16_read(state, 0x7f, &dev_id); + if (dev_id != 0xfe) + goto error; + + memcpy(&state->frontend.ops, &mb86a16_ops, sizeof (struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + state->frontend.ops.set_voltage = state->config->set_voltage; + + return &state->frontend; +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(mb86a16_attach); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Manu Abraham"); diff --git a/drivers/media/dvb/frontends/mb86a16.h b/drivers/media/dvb/frontends/mb86a16.h new file mode 100644 index 000000000000..b7545d0343f1 --- /dev/null +++ b/drivers/media/dvb/frontends/mb86a16.h @@ -0,0 +1,38 @@ +/* + Fujitsu MB86A16 DVB-S/DSS DC Receiver driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MB86A16_H +#define __MB86A16_H + +#include +#include "dvb_frontend.h" + + +struct mb86a16_config { + u8 demod_address; + + int (*set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); +}; + +extern struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, + struct i2c_adapter *i2c_adap); + + +#endif //__MB86A16_H diff --git a/drivers/media/dvb/frontends/mb86a16_priv.h b/drivers/media/dvb/frontends/mb86a16_priv.h new file mode 100644 index 000000000000..5de570068060 --- /dev/null +++ b/drivers/media/dvb/frontends/mb86a16_priv.h @@ -0,0 +1,151 @@ +/* + Fujitsu MB86A16 DVB-S/DSS DC Receiver driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MB86A16_PRIV_H +#define __MB86A16_PRIV_H + +#define MB86A16_TSOUT 0x00 +#define MB86A16_TSOUT_HIZSEL (0x01 << 5) +#define MB86A16_TSOUT_HIZCNTI (0x01 << 4) +#define MB86A16_TSOUT_MODE (0x01 << 3) +#define MB86A16_TSOUT_ORDER (0x01 << 2) +#define MB86A16_TSOUT_ERROR (0x01 << 1) +#define Mb86A16_TSOUT_EDGE (0x01 << 0) + +#define MB86A16_FEC 0x01 +#define MB86A16_FEC_FSYNC (0x01 << 5) +#define MB86A16_FEC_PCKB8 (0x01 << 4) +#define MB86A16_FEC_DVDS (0x01 << 3) +#define MB86A16_FEC_EREN (0x01 << 2) +#define Mb86A16_FEC_RSEN (0x01 << 1) +#define MB86A16_FEC_DIEN (0x01 << 0) + +#define MB86A16_AGC 0x02 +#define MB86A16_AGC_AGMD (0x01 << 6) +#define MB86A16_AGC_AGCW (0x0f << 2) +#define MB86A16_AGC_AGCP (0x01 << 1) +#define MB86A16_AGC_AGCR (0x01 << 0) + +#define MB86A16_SRATE1 0x03 +#define MB86A16_SRATE1_DECI (0x07 << 2) +#define MB86A16_SRATE1_CSEL (0x01 << 1) +#define MB86A16_SRATE1_RSEL (0x01 << 0) + +#define MB86A16_SRATE2 0x04 +#define MB86A16_SRATE2_STOFSL (0xff << 0) + +#define MB86A16_SRATE3 0x05 +#define MB86A16_SRATE2_STOFSH (0xff << 0) + +#define MB86A16_VITERBI 0x06 +#define MB86A16_FRAMESYNC 0x07 +#define MB86A16_CRLFILTCOEF1 0x08 +#define MB86A16_CRLFILTCOEF2 0x09 +#define MB86A16_STRFILTCOEF1 0x0a +#define MB86A16_STRFILTCOEF2 0x0b +#define MB86A16_RESET 0x0c +#define MB86A16_STATUS 0x0d +#define MB86A16_AFCML 0x0e +#define MB86A16_AFCMH 0x0f +#define MB86A16_BERMON 0x10 +#define MB86A16_BERTAB 0x11 +#define MB86A16_BERLSB 0x12 +#define MB86A16_BERMID 0x13 +#define MB86A16_BERMSB 0x14 +#define MB86A16_AGCM 0x15 + +#define MB86A16_DCC1 0x16 +#define MB86A16_DCC1_DISTA (0x01 << 7) +#define MB86A16_DCC1_PRTY (0x01 << 6) +#define MB86A16_DCC1_CTOE (0x01 << 5) +#define MB86A16_DCC1_TBEN (0x01 << 4) +#define MB86A16_DCC1_TBO (0x01 << 3) +#define MB86A16_DCC1_NUM (0x07 << 0) + +#define MB86A16_DCC2 0x17 +#define MB86A16_DCC2_DCBST (0x01 << 0) + +#define MB86A16_DCC3 0x18 +#define MB86A16_DCC3_CODE0 (0xff << 0) + +#define MB86A16_DCC4 0x19 +#define MB86A16_DCC4_CODE1 (0xff << 0) + +#define MB86A16_DCC5 0x1a +#define MB86A16_DCC5_CODE2 (0xff << 0) + +#define MB86A16_DCC6 0x1b +#define MB86A16_DCC6_CODE3 (0xff << 0) + +#define MB86A16_DCC7 0x1c +#define MB86A16_DCC7_CODE4 (0xff << 0) + +#define MB86A16_DCC8 0x1d +#define MB86A16_DCC8_CODE5 (0xff << 0) + +#define MB86A16_DCCOUT 0x1e +#define MB86A16_DCCOUT_DISEN (0x01 << 0) + +#define MB86A16_TONEOUT1 0x1f +#define MB86A16_TONE_TDIVL (0xff << 0) + +#define MB86A16_TONEOUT2 0x20 +#define MB86A16_TONE_TMD (0x03 << 2) +#define MB86A16_TONE_TDIVH (0x03 << 0) + +#define MB86A16_FREQ1 0x21 +#define MB86A16_FREQ2 0x22 +#define MB86A16_FREQ3 0x23 +#define MB86A16_FREQ4 0x24 +#define MB86A16_FREQSET 0x25 +#define MB86A16_CNM 0x26 +#define MB86A16_PORT0 0x27 +#define MB86A16_PORT1 0x28 +#define MB86A16_DRCFILT 0x29 +#define MB86A16_AFC 0x2a +#define MB86A16_AFCEXL 0x2b +#define MB86A16_AFCEXH 0x2c +#define MB86A16_DAGC 0x2d +#define MB86A16_SEQMODE 0x32 +#define MB86A16_S0S1T 0x33 +#define MB86A16_S2S3T 0x34 +#define MB86A16_S4S5T 0x35 +#define MB86A16_CNTMR 0x36 +#define MB86A16_SIG1 0x37 +#define MB86A16_SIG2 0x38 +#define MB86A16_VIMAG 0x39 +#define MB86A16_VISET1 0x3a +#define MB86A16_VISET2 0x3b +#define MB86A16_VISET3 0x3c +#define MB86A16_FAGCS1 0x3d +#define MB86A16_FAGCS2 0x3e +#define MB86A16_FAGCS3 0x3f +#define MB86A16_FAGCS4 0x40 +#define MB86A16_FAGCS5 0x41 +#define MB86A16_FAGCS6 0x42 +#define MB86A16_CRM 0x43 +#define MB86A16_STRM 0x44 +#define MB86A16_DAGCML 0x45 +#define MB86A16_DAGCMH 0x46 +#define MB86A16_QPSKTST 0x49 +#define MB86A16_DISTMON 0x52 +#define MB86A16_VERSION 0x7f + +#endif //__MB86A16_PRIV_H diff --git a/drivers/media/dvb/mantis/Kconfig b/drivers/media/dvb/mantis/Kconfig new file mode 100644 index 000000000000..4ba16d0ad96b --- /dev/null +++ b/drivers/media/dvb/mantis/Kconfig @@ -0,0 +1,13 @@ +config DVB_MANTIS + tristate "MANTIS based cards" + depends on DVB_CORE && PCI && I2C + select DVB_MB86A16 + select DVB_CU1216 + select DVB_ZL10353 + select DVB_STV0299 + select DVB_PLL + help + Support for PCI cards based on the Mantis PCI bridge. + Say Y when you have a Mantis based DVB card and want to use it. + + If unsure say N. diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile new file mode 100644 index 000000000000..a980ff2382b7 --- /dev/null +++ b/drivers/media/dvb/mantis/Makefile @@ -0,0 +1,7 @@ +mantis-objs = mantis_core.o mantis_dma.o mantis_pci.o mantis_i2c.o \ + mantis_dvb.o mantis_vp1033.o mantis_vp1034.o mantis_vp2033.o \ + mantis_vp3030.o + +obj-$(CONFIG_DVB_MANTIS) += mantis.o + +EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h new file mode 100644 index 000000000000..ba360f884967 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -0,0 +1,135 @@ +/* + Mantis PCI bridge driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_COMMON_H +#define __MANTIS_COMMON_H + +#include +#include +#include +#include + +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dmxdev.h" +#include "dvb_frontend.h" +#include "dvb_net.h" +#include +#include "mantis_reg.h" + +#define MANTIS_ERROR 0 +#define MANTIS_NOTICE 1 +#define MANTIS_INFO 2 +#define MANTIS_DEBUG 3 + +#define dprintk(x, y, z, format, arg...) do { \ + if (z) { \ + if ((x > MANTIS_ERROR) && (x > y)) \ + printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((x > MANTIS_NOTICE) && (x > y)) \ + printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((x > MANTIS_INFO) && (x > y)) \ + printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((x > MANTIS_DEBUG) && (x > y)) \ + printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + } else { \ + if (x > y) \ + printk(format , ##arg); \ + } \ +} while(0) + +#define mwrite(dat, addr) writel((dat), addr) +#define mread(addr) readl(addr) + +#define mmwrite(dat, addr) mwrite((dat), (mantis->mantis_mmio + (addr))) +#define mmread(addr) mread(mantis->mantis_mmio + (addr)) +#define mmand(dat, addr) mmwrite((dat) & mmread(addr), addr) +#define mmor(dat, addr) mmwrite((dat) | mmread(addr), addr) +#define mmaor(dat, addr) mmwrite((dat) | ((mask) & mmread(addr)), addr) + + +struct mantis_pci { + /* PCI stuff */ + u16 vendor_id; + u16 device_id; + u8 latency; + + struct pci_dev *pdev; + + unsigned long mantis_addr; + volatile void __iomem *mantis_mmio; + + u8 irq; + u8 revision; + + unsigned int num; + u16 ts_size; + + /* RISC Core */ + u32 finished_block; + u32 last_block; + u32 line_bytes; + u32 line_count; + u32 risc_pos; + u8 *buf_cpu; + dma_addr_t buf_dma; + u32 *risc_cpu; + dma_addr_t risc_dma; + + struct tasklet_struct tasklet; + + struct i2c_adapter adapter; + int i2c_rc; + wait_queue_head_t i2c_wq; + + /* DVB stuff */ + struct dvb_adapter dvb_adapter; + struct dvb_frontend *fe; + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dmx_frontend fe_hw; + struct dmx_frontend fe_mem; + struct dvb_net dvbnet; + + u8 feeds; + + struct mantis_config *config; + + u32 mantis_int_stat; + u32 mantis_int_mask; + + /* board specific */ + u8 mac_address[8]; + u32 sub_vendor_id; + u32 sub_device_id; + + /* A12 A13 A14 */ + int gpio_status;}; + +extern unsigned int verbose; +extern unsigned int devs; +extern unsigned int i2c; +extern int mantis_dvb_init(struct mantis_pci *mantis); +extern int mantis_frontend_init(struct mantis_pci *mantis); +extern int mantis_dvb_exit(struct mantis_pci *mantis); +extern void mantis_dma_xfer(unsigned long data); +extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value); + +#endif //__MANTIS_COMMON_H diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c new file mode 100644 index 000000000000..111227752452 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -0,0 +1,215 @@ +/* + Mantis PCI bridge driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_core.h" + + +static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) +{ + int err; + struct i2c_msg msg[] = { + { + .addr = 0x50, + .flags = 0, + .buf = data, + .len = 1 + },{ + .addr = 0x50, + .flags = I2C_M_RD, + .buf = data, + .len = length + }, + }; + if ((err = i2c_transfer(&mantis->adapter, msg, 2)) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, + "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >", + err, data[0], data[1]); + + return err; + } + msleep_interruptible(2); + + return 0; +} + +static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) +{ + int err; + + struct i2c_msg msg = { + .addr = 0x50, + .flags = 0, + .buf = data, + .len = length + }; + + if ((err = i2c_transfer(&mantis->adapter, &msg, 1)) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, + "ERROR: i2c write: < err=%i length=0x%02x d0=0x%02x, d1=0x%02x >", + err, length, data[0], data[1]); + + return err; + } + + return 0; +} + +static int get_subdevice_id(struct mantis_pci *mantis) +{ + int err; + static u8 sub_device_id[2]; + + mantis->sub_device_id = 0; + sub_device_id[0] = 0xfc; + if ((err = read_eeprom_byte(mantis, &sub_device_id[0], 2)) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error"); + return err; + } + mantis->sub_device_id = (sub_device_id[0] << 8) | sub_device_id[1]; + dprintk(verbose, MANTIS_ERROR, 1, "Sub Device ID=[0x%04x]", + mantis->sub_device_id); + + return 0; +} + +static int get_subvendor_id(struct mantis_pci *mantis) +{ + int err; + static u8 sub_vendor_id[2]; + + mantis->sub_vendor_id = 0; + sub_vendor_id[0] = 0xfe; + if ((err = read_eeprom_byte(mantis, &sub_vendor_id[0], 2)) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error"); + return err; + } + mantis->sub_vendor_id = (sub_vendor_id[0] << 8) | sub_vendor_id[1]; + dprintk(verbose, MANTIS_ERROR, 1, "Sub Vendor ID=[0x%04x]", + mantis->sub_vendor_id); + + return 0; +} + +static int get_mac_address(struct mantis_pci *mantis) +{ + int err; + + mantis->mac_address[0] = 0x08; + if ((err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6)) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error"); + + return err; + } + dprintk(verbose, MANTIS_ERROR, 1, + "MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]", + mantis->mac_address[0], mantis->mac_address[1], + mantis->mac_address[2], mantis->mac_address[3], + mantis->mac_address[4], mantis->mac_address[5]); + + return 0; +} + + +int mantis_core_init(struct mantis_pci *mantis) +{ + int err = 0; + + if ((err = mantis_i2c_init(mantis)) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis I2C init failed"); + return err; + } + if ((err = get_mac_address(mantis)) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "get MAC address failed"); + return err; + } + if ((err = get_subvendor_id(mantis)) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "get Sub vendor ID failed"); + return err; + } + if ((err = get_subdevice_id(mantis)) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "get Sub device ID failed"); + return err; + } + if ((err = mantis_dma_init(mantis)) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis DMA init failed"); + return err; + } + if ((err = mantis_dvb_init(mantis)) < 0) { + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB init failed"); + return err; + } + + return 0; +} + +int mantis_core_exit(struct mantis_pci *mantis) +{ + + mantis_dma_stop(mantis); + dprintk(verbose, MANTIS_ERROR, 1, "DMA engine stopping"); + if (mantis_dma_exit(mantis) < 0) + dprintk(verbose, MANTIS_ERROR, 1, "DMA exit failed"); + if (mantis_dvb_exit(mantis) < 0) + dprintk(verbose, MANTIS_ERROR, 1, "DVB exit failed"); + if (mantis_i2c_exit(mantis) < 0) + dprintk(verbose, MANTIS_ERROR, 1, "I2C adapter delete.. failed"); + + return 0; +} + +void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value) +{ + u32 reg; + + if (value) + reg = 0x0000; + else + reg = 0xffff; + + reg = (value << bitpos); + + mmwrite(mmread(MANTIS_GPIF_ADDR) | reg, MANTIS_GPIF_ADDR); + mmwrite(0x00, MANTIS_GPIF_DOUT); + udelay(100); + mmwrite(mmread(MANTIS_GPIF_ADDR) | reg, MANTIS_GPIF_ADDR); + mmwrite(0x00, MANTIS_GPIF_DOUT); +} + + +//direction = 0 , no CI passthrough ; 1 , CI passthrough +void mantis_set_direction(struct mantis_pci *mantis, int direction) +{ + u32 reg; + + reg = mmread(0x28); + dprintk(verbose, MANTIS_DEBUG, 1, "TS direction setup"); + if (direction == 0x01) { //to CI + reg |= 0x04; + mmwrite(reg, 0x28); + reg &= 0xff - 0x04; + mmwrite(reg, 0x28); + } else { + reg &= 0xff - 0x04; + mmwrite(reg, 0x28); + reg |= 0x04; + mmwrite(reg, 0x28); + } +} diff --git a/drivers/media/dvb/mantis/mantis_core.h b/drivers/media/dvb/mantis/mantis_core.h new file mode 100644 index 000000000000..31b2a756d99e --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_core.h @@ -0,0 +1,61 @@ +/* + Mantis PCI bridge driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_CORE_H +#define __MANTIS_CORE_H + +#include "mantis_common.h" + + +#define FE_TYPE_SAT 0 +#define FE_TYPE_CAB 1 +#define FE_TYPE_TER 2 + +#define FE_TYPE_TS204 0 +#define FE_TYPE_TS188 1 + + +struct vendorname { + __u8 *sub_vendor_name; + __u32 sub_vendor_id; +}; + +struct devicetype { + __u8 *sub_device_name; + __u32 sub_device_id; + __u8 device_type; + __u32 type_flags; +}; + + +extern int mantis_dma_init(struct mantis_pci *mantis); +extern int mantis_dma_exit(struct mantis_pci *mantis); +extern void mantis_dma_start(struct mantis_pci *mantis); +extern void mantis_dma_stop(struct mantis_pci *mantis); +extern int mantis_i2c_init(struct mantis_pci *mantis); +extern int mantis_i2c_exit(struct mantis_pci *mantis); +extern int mantis_core_init(struct mantis_pci *mantis); +extern int mantis_core_exit(struct mantis_pci *mantis); +//extern void mantis_fe_powerup(struct mantis_pci *mantis); +//extern void mantis_fe_powerdown(struct mantis_pci *mantis); +//extern void mantis_fe_reset(struct dvb_frontend *fe); +extern void mantis_set_direction(struct mantis_pci *mantis, int direction); + +#endif //__MANTIS_CORE_H diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c new file mode 100644 index 000000000000..9e3aa5ec1645 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_dma.c @@ -0,0 +1,238 @@ +/* + Mantis PCI bridge driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include "mantis_common.h" + +#define RISC_WRITE (0x01 << 28) +#define RISC_JUMP (0x07 << 28) +#define RISC_IRQ (0x01 << 24) + +#define RISC_STATUS(status) ((((~status) & 0x0f) << 20) | ((status & 0x0f) << 16)) +#define RISC_FLUSH() mantis->risc_pos = 0 +#define RISC_INSTR(opcode) mantis->risc_cpu[mantis->risc_pos++] = cpu_to_le32(opcode) + +#define MANTIS_BUF_SIZE 64 * 1024 +#define MANTIS_BLOCK_BYTES (MANTIS_BUF_SIZE >> 4) +#define MANTIS_BLOCK_COUNT (1 << 4) +#define MANTIS_RISC_SIZE PAGE_SIZE + +int mantis_dma_exit(struct mantis_pci *mantis) +{ + if (mantis->buf_cpu) { + dprintk(verbose, MANTIS_ERROR, 1, + "DMA=0x%lx cpu=0x%p size=%d", + (unsigned long) mantis->buf_dma, + mantis->buf_cpu, + MANTIS_BUF_SIZE); + + pci_free_consistent(mantis->pdev, MANTIS_BUF_SIZE, + mantis->buf_cpu, mantis->buf_dma); + + mantis->buf_cpu = NULL; + } + if (mantis->risc_cpu) { + dprintk(verbose, MANTIS_ERROR, 1, + "RISC=0x%lx cpu=0x%p size=%lx", + (unsigned long) mantis->risc_dma, + mantis->risc_cpu, + MANTIS_RISC_SIZE); + + pci_free_consistent(mantis->pdev, MANTIS_RISC_SIZE, + mantis->risc_cpu, mantis->risc_dma); + + mantis->risc_cpu = NULL; + } + + return 0; +} + +static inline int mantis_alloc_buffers(struct mantis_pci *mantis) +{ + if (!mantis->buf_cpu) { + mantis->buf_cpu = pci_alloc_consistent(mantis->pdev, + MANTIS_BUF_SIZE, + &mantis->buf_dma); + if (!mantis->buf_cpu) { + dprintk(verbose, MANTIS_ERROR, 1, + "DMA buffer allocation failed"); + + goto err; + } + dprintk(verbose, MANTIS_ERROR, 1, + "DMA=0x%lx cpu=0x%p size=%d", + (unsigned long) mantis->buf_dma, + mantis->buf_cpu, MANTIS_BUF_SIZE); + } + if (!mantis->risc_cpu) { + mantis->risc_cpu = pci_alloc_consistent(mantis->pdev, + MANTIS_RISC_SIZE, + &mantis->risc_dma); + + if (!mantis->risc_cpu) { + dprintk(verbose, MANTIS_ERROR, 1, + "RISC program allocation failed"); + + mantis_dma_exit(mantis); + + goto err; + } + dprintk(verbose, MANTIS_ERROR, 1, + "RISC=0x%lx cpu=0x%p size=%lx", + (unsigned long) mantis->risc_dma, + mantis->risc_cpu, MANTIS_RISC_SIZE); + } + + return 0; +err: + dprintk(verbose, MANTIS_ERROR, 1, "Out of memory (?) ....."); + return -ENOMEM; +} + +static inline int mantis_calc_lines(struct mantis_pci *mantis) +{ + mantis->line_bytes = MANTIS_BLOCK_BYTES; + mantis->line_count = MANTIS_BLOCK_COUNT; + + while (mantis->line_bytes > 4095) { + mantis->line_bytes >>= 1; + mantis->line_count <<= 1; + } + + dprintk(verbose, MANTIS_DEBUG, 1, + "Mantis RISC block bytes=[%d], line bytes=[%d], line count=[%d]", + MANTIS_BLOCK_BYTES, mantis->line_bytes, mantis->line_count); + + if (mantis->line_count > 255) { + dprintk(verbose, MANTIS_ERROR, 1, "Buffer size error"); + return -EINVAL; + } + + return 0; +} + +int mantis_dma_init(struct mantis_pci *mantis) +{ + int err = 0; + + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DMA init"); + if (mantis_alloc_buffers(mantis) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Error allocating DMA buffer"); + + // Stop RISC Engine +// mmwrite(mmread(MANTIS_DMA_CTL) & ~MANTIS_RISC_EN, MANTIS_DMA_CTL); + mmwrite(0, MANTIS_DMA_CTL); + + goto err; + } + if ((err = mantis_calc_lines(mantis)) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis calc lines failed"); + + goto err; + } + + return 0; +err: + return err; +} + + + +static inline void mantis_risc_program(struct mantis_pci *mantis) +{ + u32 buf_pos = 0; + u32 line; + + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis create RISC program"); + RISC_FLUSH(); + + dprintk(verbose, MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u", + mantis->line_count, mantis->line_bytes); + + for (line = 0; line < mantis->line_count; line++) { + dprintk(verbose, MANTIS_DEBUG, 1, "RISC PROG line=[%d]", line); + if (!(buf_pos % MANTIS_BLOCK_BYTES)) { + RISC_INSTR(RISC_WRITE | + RISC_IRQ | + RISC_STATUS(((buf_pos / MANTIS_BLOCK_BYTES) + + (MANTIS_BLOCK_COUNT - 1)) % + MANTIS_BLOCK_COUNT) | + mantis->line_bytes); + } else { + RISC_INSTR(RISC_WRITE | mantis->line_bytes); + } + RISC_INSTR(mantis->buf_dma + buf_pos); + buf_pos += mantis->line_bytes; + } + RISC_INSTR(RISC_JUMP); + RISC_INSTR(mantis->risc_dma); +} + +void mantis_dma_start(struct mantis_pci *mantis) +{ + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Start DMA engine"); + + mantis_risc_program(mantis); + mmwrite(cpu_to_le32(mantis->risc_dma), MANTIS_RISC_START); + mmwrite(MANTIS_GPIF_RDWRN, MANTIS_GPIF_ADDR); + + mmwrite(0, MANTIS_DMA_CTL); + mantis->last_block = mantis->finished_block = 0; + + mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_RISCI, MANTIS_INT_MASK); + + mmwrite(MANTIS_FIFO_EN | MANTIS_DCAP_EN + | MANTIS_RISC_EN, MANTIS_DMA_CTL); + +} + +void mantis_dma_stop(struct mantis_pci *mantis) +{ + u32 stat = 0, mask = 0; + + stat = mmread(MANTIS_INT_STAT); + mask = mmread(MANTIS_INT_MASK); + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Stop DMA engine"); + + mmwrite((mmread(MANTIS_DMA_CTL) & ~(MANTIS_FIFO_EN | + MANTIS_DCAP_EN | + MANTIS_RISC_EN)), MANTIS_DMA_CTL); + + mmwrite(mmread(MANTIS_INT_STAT), MANTIS_INT_STAT); + + mmwrite(mmread(MANTIS_INT_MASK) & ~(MANTIS_INT_RISCI | + MANTIS_INT_RISCEN), MANTIS_INT_MASK); +} + + +void mantis_dma_xfer(unsigned long data) +{ + struct mantis_pci *mantis = (struct mantis_pci *) data; + + while (mantis->last_block != mantis->finished_block) { + dprintk(verbose, MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]", + mantis->last_block, mantis->finished_block); + + (mantis->ts_size ? dvb_dmx_swfilter_204: dvb_dmx_swfilter) + (&mantis->demux, &mantis->buf_cpu[mantis->last_block * MANTIS_BLOCK_BYTES], MANTIS_BLOCK_BYTES); + mantis->last_block = (mantis->last_block + 1) % MANTIS_BLOCK_COUNT; + } +} diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c new file mode 100644 index 000000000000..5830d4a7bda2 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -0,0 +1,304 @@ +/* + Mantis PCI bridge driver + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include "mantis_common.h" +#include "mantis_core.h" + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "mantis_vp1033.h" +#include "mantis_vp1034.h" +#include "mantis_vp2033.h" +#include "mantis_vp3030.h" + +/* Tuner power supply control */ +void mantis_fe_powerup(struct mantis_pci *mantis) +{ + dprintk(verbose, MANTIS_DEBUG, 1, "Frontend Power ON"); + gpio_set_bits(mantis, 0x0c, 1); + msleep_interruptible(100); + gpio_set_bits(mantis, 0x0c, 1); + msleep_interruptible(100); +} + +void mantis_fe_powerdown(struct mantis_pci *mantis) +{ + dprintk(verbose, MANTIS_DEBUG, 1, "Frontend Power OFF"); + gpio_set_bits(mantis, 0x0c, 0); +} + +static int mantis_fe_reset(struct dvb_frontend *fe) +{ + struct mantis_pci *mantis = fe->dvb->priv; + + dprintk(verbose, MANTIS_DEBUG, 1, "Frontend Reset"); + gpio_set_bits(mantis, 13, 0); + msleep_interruptible(100); + gpio_set_bits(mantis, 13, 0); + msleep_interruptible(100); + gpio_set_bits(mantis, 13, 1); + msleep_interruptible(100); + gpio_set_bits(mantis, 13, 1); + + return 0; +} + +static int mantis_frontend_reset(struct mantis_pci *mantis) +{ + dprintk(verbose, MANTIS_DEBUG, 1, "Frontend Reset"); + gpio_set_bits(mantis, 13, 0); + msleep_interruptible(100); + gpio_set_bits(mantis, 13, 0); + msleep_interruptible(100); + gpio_set_bits(mantis, 13, 1); + msleep_interruptible(100); + gpio_set_bits(mantis, 13, 1); + + return 0; +} + +static int mantis_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct mantis_pci *mantis = dvbdmx->priv; + + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB Start feed"); + if (!dvbdmx->dmx.frontend) { + dprintk(verbose, MANTIS_DEBUG, 1, "no frontend ?"); + return -EINVAL; + } + mantis->feeds++; + dprintk(verbose, MANTIS_DEBUG, 1, + "mantis start feed, feeds=%d", + mantis->feeds); + + if (mantis->feeds == 1) { + dprintk(verbose, MANTIS_DEBUG, 1, "mantis start feed & dma"); + printk("mantis start feed & dma\n"); + mantis_dma_start(mantis); + } + + return mantis->feeds; +} + +static int mantis_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct mantis_pci *mantis = dvbdmx->priv; + + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB Stop feed"); + if (!dvbdmx->dmx.frontend) { + dprintk(verbose, MANTIS_DEBUG, 1, "no frontend ?"); + return -EINVAL; + } + mantis->feeds--; + if (mantis->feeds == 0) { + dprintk(verbose, MANTIS_DEBUG, 1, "mantis stop feed and dma"); + printk("mantis stop feed and dma\n"); + mantis_dma_stop(mantis); + } + return 0; +} + +int __devinit mantis_dvb_init(struct mantis_pci *mantis) +{ + int result; + + dprintk(verbose, MANTIS_DEBUG, 1, "dvb_register_adapter"); + if (dvb_register_adapter(&mantis->dvb_adapter, + "Mantis dvb adapter", THIS_MODULE, + &mantis->pdev->dev) < 0) { + + dprintk(verbose, MANTIS_ERROR, 1, "Error registering adapter"); + return -ENODEV; + } + mantis->dvb_adapter.priv = mantis; + mantis->demux.dmx.capabilities = DMX_TS_FILTERING | + DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING; + + mantis->demux.priv = mantis; + mantis->demux.filternum = 256; + mantis->demux.feednum = 256; + mantis->demux.start_feed = mantis_dvb_start_feed; + mantis->demux.stop_feed = mantis_dvb_stop_feed; + mantis->demux.write_to_decoder = NULL; + mantis->ts_size = 1; //188 + dprintk(verbose, MANTIS_DEBUG, 1, "dvb_dmx_init"); + if ((result = dvb_dmx_init(&mantis->demux)) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, + "dvb_dmx_init failed, ERROR=%d", result); + + goto err0; + } + mantis->dmxdev.filternum = 256; + mantis->dmxdev.demux = &mantis->demux.dmx; + mantis->dmxdev.capabilities = 0; + dprintk(verbose, MANTIS_DEBUG, 1, "dvb_dmxdev_init"); + if ((result = dvb_dmxdev_init(&mantis->dmxdev, + &mantis->dvb_adapter)) < 0) { + + dprintk(verbose, MANTIS_ERROR, 1, + "dvb_dmxdev_init failed, ERROR=%d", result); + goto err1; + } + mantis->fe_hw.source = DMX_FRONTEND_0; + if ((result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, + &mantis->fe_hw)) < 0) { + + dprintk(verbose, MANTIS_ERROR, 1, + "dvb_dmx_init failed, ERROR=%d", result); + + goto err2; + } + mantis->fe_mem.source = DMX_MEMORY_FE; + if ((result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, + &mantis->fe_mem)) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, + "dvb_dmx_init failed, ERROR=%d", result); + + goto err3; + } + if ((result = mantis->demux.dmx.connect_frontend(&mantis->demux.dmx, + &mantis->fe_hw)) < 0) { + + dprintk(verbose, MANTIS_ERROR, 1, + "dvb_dmx_init failed, ERROR=%d", result); + + goto err4; + } + dvb_net_init(&mantis->dvb_adapter, &mantis->dvbnet, &mantis->demux.dmx); + tasklet_init(&mantis->tasklet, mantis_dma_xfer, (unsigned long) mantis); + mantis_frontend_init(mantis); + return 0; + + /* Error conditions .. */ +err4: + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem); +err3: + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw); +err2: + dvb_dmxdev_release(&mantis->dmxdev); +err1: + dvb_dmx_release(&mantis->demux); +err0: + dvb_unregister_adapter(&mantis->dvb_adapter); + + return result; +} + +#define MANTIS_VP_1027_DVB_S 0x0013 +#define MANTIS_VP_1033_DVB_S 0x0016 +#define MANTIS_VP_1034_DVB_S 0x0014 +#define MANTIS_VP_1040_DVB_S2 +#define MANTIS_VP_1041_DVB_S2 +#define MANTIS_VP_2033_DVB_C 0x0008 +#define MANTIS_VP_3024_DVB_T 0x0009 +#define MANTIS_VP_3030_DVB_T 0x0024 + +int __devinit mantis_frontend_init(struct mantis_pci *mantis) +{ + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis frontend Init"); + mantis_fe_powerup(mantis); + mantis_frontend_reset(mantis); + dprintk(verbose, MANTIS_DEBUG, 1, "Device ID=%02x", mantis->sub_device_id); + switch (mantis->sub_device_id) { + case MANTIS_VP_1033_DVB_S: // VP-1033 + dprintk(verbose, MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)"); + mantis->fe = stv0299_attach(&lgtdqcs001f_config, + &mantis->adapter); + + if (mantis->fe) { + mantis->fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set; + dprintk(verbose, MANTIS_ERROR, 1, + "found STV0299 DVB-S frontend @ 0x%02x", + lgtdqcs001f_config.demod_address); + + dprintk(verbose, MANTIS_ERROR, 1, + "Mantis DVB-S STV0299 frontend attach success"); + } + break; + case MANTIS_VP_1034_DVB_S: // VP-1034 + dprintk(verbose, MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)"); + mantis->fe = mb86a16_attach(&vp1034_config, &mantis->adapter); + if (mantis->fe) { + dprintk(verbose, MANTIS_ERROR, 1, + "found MB86A16 DVB-S/DSS frontend @0x%02x", + vp1034_config.demod_address); + + } + break; + case MANTIS_VP_2033_DVB_C: // VP-2033 + dprintk(verbose, MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); + mantis->fe = cu1216_attach(&philips_cu1216_config, &mantis->adapter); + if (mantis->fe) { + mantis->fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set; + dprintk(verbose, MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend @ 0x%02x", + philips_cu1216_config.demod_address); + + dprintk(verbose, MANTIS_ERROR, 1, + "Mantis DVB-C Philips CU1216 frontend attach success"); + + } + break; + default: + dprintk(verbose, MANTIS_DEBUG, 1, "Unknown frontend:[0x%02x]", + mantis->sub_device_id); + + return -ENODEV; + } + if (mantis->fe == NULL) { + dprintk(verbose, MANTIS_ERROR, 1, "!!! NO Frontends found !!!"); + return -ENODEV; + } else { + if (dvb_register_frontend(&mantis->dvb_adapter, mantis->fe)) { + dprintk(verbose, MANTIS_ERROR, 1, + "ERROR: Frontend registration failed"); + + if (mantis->fe->ops.release) + mantis->fe->ops.release(mantis->fe); + + mantis->fe = NULL; + return -ENODEV; + } + } + + return 0; +} + +int __devexit mantis_dvb_exit(struct mantis_pci *mantis) +{ + tasklet_kill(&mantis->tasklet); + dvb_net_release(&mantis->dvbnet); + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem); + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw); + dvb_dmxdev_release(&mantis->dmxdev); + dvb_dmx_release(&mantis->demux); + + if (mantis->fe) + dvb_unregister_frontend(mantis->fe); + dprintk(verbose, MANTIS_DEBUG, 1, "dvb_unregister_adapter"); + dvb_unregister_adapter(&mantis->dvb_adapter); + + return 0; +} diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c new file mode 100644 index 000000000000..cfecb344bb7a --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -0,0 +1,189 @@ +/* + Mantis PCI bridge driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "mantis_common.h" + +#define I2C_HW_B_MANTIS 0x1c + +static int mantis_ack_wait(struct mantis_pci *mantis) +{ + int rc = 0; + + if (wait_event_interruptible_timeout(mantis->i2c_wq, + mantis->mantis_int_stat & MANTIS_INT_I2CRACK, + msecs_to_jiffies(50)) == -ERESTARTSYS) + + rc = -EREMOTEIO; +/* + // Wait till we are done + while (mantis->mantis_int_stat & MANTIS_INT_I2CRACK){ + if (mantis->mantis_int_stat & MANTIS_INT_I2CDONE) { + mantis->mantis_int_stat &= ~MANTIS_INT_I2CRACK; +// dprintk(verbose, MANTIS_DEBUG, 1, "SLAVE RACK 'ed .. Waiting for I2CDONE"); + break; + } + } + + if (mantis->mantis_int_stat & MANTIS_INT_I2CDONE) { +// dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Int I2CDONE"); + rc = 1; + } + + mantis->mantis_int_stat &= ~MANTIS_INT_I2CDONE; +*/ + // .. + if (mantis->mantis_int_stat & MANTIS_INT_I2CRACK) + msleep_interruptible(10); + + return rc; +} + +static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) +{ + u32 rxd, i; + + dprintk(verbose, MANTIS_DEBUG, 1, "Address=[0x%02x]", msg->addr); + for (i = 0; i < msg->len; i++) { + rxd = (msg->addr << 25) | (1 << 24) + | MANTIS_I2C_RATE_3 + | MANTIS_I2C_STOP + | MANTIS_I2C_PGMODE; + + if (i == (msg->len - 1)) + rxd &= ~MANTIS_I2C_STOP; + + mmwrite(rxd, MANTIS_I2CDATA_CTL); + if (mantis_ack_wait(mantis) < 0) { + dprintk(verbose, MANTIS_DEBUG, 1, "ACK failed"); + return -EIO; + } + rxd = mmread(MANTIS_I2CDATA_CTL); + msg->buf[i] = (u8)((rxd >> 8) & 0xFF); + dprintk(verbose, MANTIS_DEBUG, 1, + "Data=[0x%02x]", i, msg->buf[i]); + + msleep_interruptible(2); + } + + return 0; +} + +static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg) +{ + int i; + u32 txd = 0; + + dprintk(verbose, MANTIS_DEBUG, 1, "Address=[0x%02x]", msg->addr); + for (i = 0; i < msg->len; i++) { + dprintk(verbose, MANTIS_DEBUG, 1, "Data=[0x%02x]", i, msg->buf[i]); + txd = (msg->addr << 25) | (msg->buf[i] << 8) + | MANTIS_I2C_RATE_3 + | MANTIS_I2C_STOP + | MANTIS_I2C_PGMODE; + + if (i == (msg->len - 1)) + txd &= ~MANTIS_I2C_STOP; + + mmwrite(txd, MANTIS_I2CDATA_CTL); + if (mantis_ack_wait(mantis) < 0) { + dprintk(verbose, MANTIS_DEBUG, 1, "ACK failed"); + return -1; + } + udelay(500); + } + + return 0; +} + +static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) +{ + int ret = 0, i; + struct mantis_pci *mantis; + + mantis = i2c_get_adapdata(adapter); + for (i = 0; i < num; i++) { + if (msgs[i].flags & I2C_M_RD) + ret = mantis_i2c_read(mantis, &msgs[i]); + else + ret = mantis_i2c_write(mantis, &msgs[i]); + + if (ret < 0) + return ret; + } + + return num; +} + +static u32 mantis_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm mantis_algo = { + .master_xfer = mantis_i2c_xfer, + .functionality = mantis_i2c_func, +}; + +static struct i2c_adapter mantis_i2c_adapter = { + .owner = THIS_MODULE, + .name = "Mantis I2C", + .id = I2C_HW_B_MANTIS, + .class = I2C_CLASS_TV_DIGITAL, + .algo = &mantis_algo, +}; + +int __devinit mantis_i2c_init(struct mantis_pci *mantis) +{ + u32 intstat; + + memcpy(&mantis->adapter, &mantis_i2c_adapter, sizeof (mantis_i2c_adapter)); + i2c_set_adapdata(&mantis->adapter, mantis); + mantis->i2c_rc = i2c_add_adapter(&mantis->adapter); + if (mantis->i2c_rc < 0) + return mantis->i2c_rc; + + dprintk(verbose, MANTIS_DEBUG, 1, "Initializing I2C .."); + + // Clear all interrupts + intstat = mmread(MANTIS_INT_STAT); + mmwrite(intstat, MANTIS_INT_STAT); + + mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_I2CDONE, + MANTIS_INT_MASK); + + dprintk(verbose, MANTIS_DEBUG, 1, "[0x%08x/%08x]", + mmread(MANTIS_INT_STAT), mmread(MANTIS_INT_MASK)); + + return 0; +} + +int __devexit mantis_i2c_exit(struct mantis_pci *mantis) +{ + dprintk(verbose, MANTIS_DEBUG, 1, "Removing I2C adapter"); + return i2c_del_adapter(&mantis->adapter); +} diff --git a/drivers/media/dvb/mantis/mantis_reg.h b/drivers/media/dvb/mantis/mantis_reg.h new file mode 100644 index 000000000000..1b54e09fd862 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_reg.h @@ -0,0 +1,109 @@ +/* + Mantis PCI bridge driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_REG_H +#define __MANTIS_REG_H + +// Interrupts +#define MANTIS_INT_STAT 0x00 +#define MANTIS_INT_MASK 0x04 + +#define MANTIS_INT_RISCSTAT (0x0f << 28) +#define MANTIS_INT_RISCEN (0x01 << 27) +#define MANTIS_INT_I2CRACK (0x01 << 26) + +//#define MANTIS_INT_GPIF (0xff << 12) + +#define MANTIS_INT_PCMCIA7 (0x01 << 19) +#define MANTIS_INT_PCMCIA6 (0x01 << 18) +#define MANTIS_INT_PCMCIA5 (0x01 << 17) +#define MANTIS_INT_PCMCIA4 (0x01 << 16) +#define MANTIS_INT_PCMCIA3 (0x01 << 15) +#define MANTIS_INT_PCMCIA2 (0x01 << 14) +#define MANTIS_INT_PCMCIA1 (0x01 << 13) +#define MANTIS_INT_PCMCIA0 (0x01 << 12) +#define MANTIS_INT_IRQ1 (0x01 << 11) +#define MANTIS_INT_IRQ0 (0x01 << 10) +#define MANTIS_INT_OCERR (0x01 << 8) +#define MANTIS_INT_PABORT (0x01 << 7) +#define MANTIS_INT_RIPERR (0x01 << 6) +#define MANTIS_INT_PPERR (0x01 << 5) +#define MANTIS_INT_FTRGT (0x01 << 3) +#define MANTIS_INT_RISCI (0x01 << 1) +#define MANTIS_INT_I2CDONE (0x01 << 0) + +// DMA +#define MANTIS_DMA_CTL 0x08 +#define MANTIS_I2C_RD (0x01 << 7) +#define MANTIS_I2C_WR (0x01 << 6) +#define MANTIS_DCAP_MODE (0x01 << 5) +#define MANTIS_FIFO_TP_4 (0x00 << 3) +#define MANTIS_FIFO_TP_8 (0x01 << 3) +#define MANTIS_FIFO_TP_16 (0x02 << 3) +#define MANTIS_FIFO_EN (0x01 << 2) +#define MANTIS_DCAP_EN (0x01 << 1) +#define MANTIS_RISC_EN (0x01 << 0) + +#define MANTIS_RISC_START 0x10 +#define MANTIS_RISC_PC 0x14 + +// I2C +#define MANTIS_I2CDATA_CTL 0x18 +#define MANTIS_I2C_RATE_1 (0x00 << 6) +#define MANTIS_I2C_RATE_2 (0x01 << 6) +#define MANTIS_I2C_RATE_3 (0x02 << 6) +#define MANTIS_I2C_RATE_4 (0x03 << 6) +#define MANTIS_I2C_STOP (0x01 << 5) +#define MANTIS_I2C_PGMODE (0x01 << 3) + +#define MANTIS_GPIF_IRQCFG 0x98 +#define MANTIS_GPIF_IRQPOL (0x01 << 8) +#define MANTIS_MASK_WRACK (0x01 << 7) +#define MANTIS_MASK_BRRDY (0x01 << 6) +#define MANTIS_MASK_OVFLW (0x01 << 5) +#define MANTIS_MASK_OTHERR (0x01 << 4) +#define MANTIS_MASK_WSTO (0x01 << 3) +#define MANTIS_MASK_EXTIRQ (0x01 << 2) +#define MANTIS_MASK_PLUGIN (0x01 << 1) +#define MANTIS_MASK_PLUGOUT (0x01 << 0) + +#define MANTIS_GPIF_STATUS 0x9c +#define MANTIS_SBUF_KILLOP (0x01 << 15) +#define MANTIS_SBUF_OPDONE (0x01 << 14) +#define MANTIS_SBUF_EMPTY (0x01 << 13) +#define MANTIS_GPIF_DETSTAT (0x01 << 9) +#define MANTIS_GPIF_INTSTAT (0x01 << 8) +#define MANTIS_GPIF_WRACK (0x01 << 7) +#define MANTIS_GPIF_BRRDY (0x01 << 6) +#define MANTIS_SBUF_OVFLW (0x01 << 5) +#define MANTIS_GPIF_OTHERR (0x01 << 4) +#define MANTIS_SBUF_WSTO (0x01 << 3) +#define MANTIS_GPIF_EXTIRQ (0x01 << 2) +#define MANTIS_CARD_PLUGIN (0x01 << 1) +#define MANTIS_CARD_PLUGOUT (0x01 << 0) + +#define MANTIS_GPIF_ADDR 0xb0 +#define MANTIS_GPIF_RDWRN (0x01 << 31) + +#define MANTIS_GPIF_DOUT 0xb4 +#define MANTIS_GPIF_DIN 0xb8 + + +#endif //__MANTIS_REG_H diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c new file mode 100644 index 000000000000..720f4fb7e925 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1033.c @@ -0,0 +1,151 @@ +/* + Mantis VP-1033 driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_vp1033.h" + +u8 lgtdqcs001f_inittab[] = { + 0x01, 0x15, + 0x02, 0x00, + 0x03, 0x00, + 0x04, 0x2a, + 0x05, 0x85, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0x00, + 0x0c, 0x01, + 0x0d, 0x81, + 0x0e, 0x44, + 0x0f, 0x94, + 0x10, 0x3c, + 0x11, 0x84, + 0x12, 0xb9, + 0x13, 0xb5, + 0x14, 0x4f, + 0x15, 0xc9, + 0x16, 0x80, + 0x17, 0x36, + 0x18, 0xfb, + 0x19, 0xcf, + 0x1a, 0xbc, + 0x1c, 0x2b, + 0x1d, 0x27, + 0x1e, 0x00, + 0x1f, 0x0b, + 0x20, 0xa1, + 0x21, 0x60, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, + 0x29, 0x28, + 0x2a, 0x14, + 0x2b, 0x0f, + 0x2c, 0x09, + 0x2d, 0x05, + 0x31, 0x1f, + 0x32, 0x19, + 0x33, 0xfc, + 0x34, 0x13, + 0xff, 0xff, +}; + +struct stv0299_config lgtdqcs001f_config = { + .demod_address = 0x68, + .inittab = lgtdqcs001f_inittab, + .mclk = 88000000UL, +// .invert = 0, + .invert = 1, +// .enhanced_tuning = 0, + .skip_reinit = 0, + .lock_output = STV0229_LOCKOUTPUT_0, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = lgtdqcs001f_set_symbol_rate, +// .pll_set = lgtdqcs001f_pll_set, +}; + +int lgtdqcs001f_tuner_set(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + u8 buf[4]; + u32 div; + + struct mantis_pci *mantis = fe->dvb->priv; + + struct i2c_msg msg = { + .addr = 0x61, + .flags = 0, + .buf = buf, + .len = sizeof (buf) + }; + div = params->frequency / 250; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x83; + buf[3] = 0xc0; + + if (params->frequency < 1531000) + buf[3] |= 0x04; + else + buf[3] &= ~0x04; + if (i2c_transfer(&mantis->adapter, &msg, 1) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Write: I2C Transfer failed"); + return -EIO; + } + msleep_interruptible(100); + + return 0; +} + +int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe, + u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + + if (srate < 1500000) { + aclk = 0xb7; + bclk = 0x47; + } else if (srate < 3000000) { + aclk = 0xb7; + bclk = 0x4b; + } else if (srate < 7000000) { + aclk = 0xb7; + bclk = 0x4f; + } else if (srate < 14000000) { + aclk = 0xb7; + bclk = 0x53; + } else if (srate < 30000000) { + aclk = 0xb6; + bclk = 0x53; + } else if (srate < 45000000) { + aclk = 0xb4; + bclk = 0x51; + } + stv0299_writereg (fe, 0x13, aclk); + stv0299_writereg (fe, 0x14, bclk); + + stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); + + return 0; +} diff --git a/drivers/media/dvb/mantis/mantis_vp1033.h b/drivers/media/dvb/mantis/mantis_vp1033.h new file mode 100644 index 000000000000..d50f09233ffb --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1033.h @@ -0,0 +1,35 @@ +/* + Mantis VP-1033 driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP1033_H +#define __MANTIS_VP1033_H + +#include "stv0299.h" +#include "dvb_frontend.h" + +extern struct stv0299_config lgtdqcs001f_config; + +extern int lgtdqcs001f_tuner_set(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params); + +extern int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio); + + +#endif // __MANTIS_VP1033_H diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c new file mode 100644 index 000000000000..b85ac29691d0 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1034.c @@ -0,0 +1,52 @@ +/* + Mantis VP-1034 driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_vp1034.h" + +struct mb86a16_config vp1034_config = { + .demod_address = 0x08, + .set_voltage = vp1034_set_voltage, +}; + +int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct mantis_pci *mantis = fe->dvb->priv; + + switch (voltage) { + case SEC_VOLTAGE_13: + mmwrite((mmread(MANTIS_GPIF_ADDR)) | voltage, MANTIS_GPIF_ADDR); + dprintk(verbose, MANTIS_ERROR, 1, "Polarization=[13V]"); + break; + case SEC_VOLTAGE_18: + mmwrite((mmread(MANTIS_GPIF_ADDR)) & voltage, MANTIS_GPIF_ADDR); + dprintk(verbose, MANTIS_ERROR, 1, "Polarization=[18V]"); + break; + case SEC_VOLTAGE_OFF: + dprintk(verbose, MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN"); + break; + default: + dprintk(verbose, MANTIS_ERROR, 1, "Invalid = (%d)", (u32 ) voltage); + return -EINVAL; + } + mmwrite(0x00, MANTIS_GPIF_DOUT); + + return 0; +} diff --git a/drivers/media/dvb/mantis/mantis_vp1034.h b/drivers/media/dvb/mantis/mantis_vp1034.h new file mode 100644 index 000000000000..2324dada09de --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1034.h @@ -0,0 +1,30 @@ +/* + Mantis VP-1034 driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP1034_H +#define __MANTIS_VP1034_H + +#include "mb86a16.h" +#include "dvb_frontend.h" + +extern struct mb86a16_config vp1034_config; +extern int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage); + +#endif // __MANTIS_VP1034_H diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c new file mode 100644 index 000000000000..bca9ebaf39d7 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp2033.c @@ -0,0 +1,73 @@ +/* + Mantis VP-2033 driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_vp2033.h" + +struct tda10021_state { + struct i2c_adapter *i2c; + struct dvb_frontend_ops ops; + /* configuration settings */ + const struct tda10021_config *config; + struct dvb_frontend frontend; + + u8 pwm; + u8 reg0; +}; + +struct cu1216_config philips_cu1216_config = { + .demod_address = 0x18 >> 1, + .pll_set = philips_cu1216_tuner_set, +// .fe_reset = mantis_fe_reset, +}; + +int philips_cu1216_tuner_set(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ +// struct tda10021_state *state = fe->demodulator_priv; + struct mantis_pci *mantis = fe->dvb->priv; + + u8 buf[4]; + + struct i2c_msg msg = { + .addr = 0xc0 >> 1, + .flags = 0, + .buf = buf, + .len = sizeof (buf) + }; + +#define TUNER_MUL 62500 + + u32 div = (params->frequency + 36125000 + TUNER_MUL / 2) / TUNER_MUL; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x86; + buf[3] = (params->frequency < 150000000 ? 0xA1 : + params->frequency < 445000000 ? 0x92 : 0x34); + +// if (i2c_transfer(state->i2c, &msg, 1) < 0) { + if (i2c_transfer(&mantis->adapter, &msg, 1) < 0) { + printk("%s tuner not ack!\n", __FUNCTION__); + return -EIO; + } + msleep(100); + return 0; +} diff --git a/drivers/media/dvb/mantis/mantis_vp2033.h b/drivers/media/dvb/mantis/mantis_vp2033.h new file mode 100644 index 000000000000..29baba180961 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp2033.h @@ -0,0 +1,33 @@ +/* + Mantis VP-2033 driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP2033_H +#define __MANTIS_VP2033_H + +#include "cu1216.h" +#include "dvb_frontend.h" + +extern struct cu1216_config philips_cu1216_config; + +extern int philips_cu1216_tuner_set(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params); + + +#endif // __MANTIS_VP2033_H diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c new file mode 100644 index 000000000000..f44f226ce9ab --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp3030.c @@ -0,0 +1,53 @@ +/* + Mantis VP-3030 driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_vp3030.h" + +struct zl10353_config mantis_vp3030_config = { + .demod_address = 0x0f, +}; + +int panasonic_en57h12d5_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + u8 buf[4]; + int rc; + struct mantis_pci *mantis = fe->dvb->priv; + + struct i2c_msg tuner_msg = { + .addr = 0x60, + .flags = 0, + .buf = buf, + .len = sizeof (buf) + }; + + if ((params->frequency < 950000) || (params->frequency > 2150000)) + return -EINVAL; + rc = i2c_transfer(&mantis->adapter, &tuner_msg, 1); + if (rc != 1) { + printk("%s: I2C Transfer returned [%d]\n", __func__, rc); + return -EIO; + } + msleep_interruptible(1); + printk("%s: Send params to tuner ok!!!\n", __func__); + + return 0; +} diff --git a/drivers/media/dvb/mantis/mantis_vp3030.h b/drivers/media/dvb/mantis/mantis_vp3030.h new file mode 100644 index 000000000000..f8e72cce7e69 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp3030.h @@ -0,0 +1,30 @@ +/* + Mantis VP-3030 driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP3030_H +#define __MANTIS_VP3030_H + +#include "zl10353.h" +#include "dvb-pll.h" +#include "dvb_frontend.h" + +extern struct zl10353_config mantis_vp3030_config; + +#endif // __MANTIS_VP3030_H From a890cce595c86013ca1fba644c25c01b86149b23 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Wed, 2 Dec 2009 21:58:38 -0300 Subject: [PATCH 1022/1626] V4L/DVB (13700): [MB86A16] Need a bit of settling time Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a16.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c index 6a78a0c74036..e8fa90801d75 100644 --- a/drivers/media/dvb/frontends/mb86a16.c +++ b/drivers/media/dvb/frontends/mb86a16.c @@ -243,11 +243,16 @@ static int initial_set(struct mb86a16_state *state) { if (stlp_set(state, 5, 7)) goto err; + + udelay(100); if (afcex_data_set(state, 0, 0)) goto err; + + udelay(100); if (afcofs_data_set(state, 0, 0)) goto err; + udelay(100); if (mb86a16_write(state, MB86A16_CRLFILTCOEF1, 0x16) < 0) goto err; if (mb86a16_write(state, 0x2f, 0x21) < 0) @@ -1149,11 +1154,12 @@ static int mb86a16_set_fe(struct mb86a16_state *state) v, R, swp_ofs, &fOSC, &afcex_freq, &AFCEX_L, &AFCEX_H); + udelay(100); if (rf_val_set(state, fOSC, state->srate, R) < 0) { dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); return -1; } - + udelay(100); if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); return -1; From b05c90de08b582172b8f63dd751ac0a1aee421e9 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Wed, 2 Dec 2009 21:59:20 -0300 Subject: [PATCH 1023/1626] V4L/DVB (13701): [MB86A16] Reduce Carrier Recovery range to 3Mhz Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a16.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c index e8fa90801d75..47c0d5739dd4 100644 --- a/drivers/media/dvb/frontends/mb86a16.c +++ b/drivers/media/dvb/frontends/mb86a16.c @@ -1036,8 +1036,7 @@ static int mb86a16_set_fe(struct mb86a16_state *state) dprintk(verbose, MB86A16_INFO, 1, "freq=%d Mhz, symbrt=%d Ksps", state->frequency, state->srate); - fcp = 5000; // (carrier recovery [kHz]) -// fcp = 3000; + fcp = 3000; swp_ofs = state->srate / 4; for (i = 0; i < 60; i++) From e15c7ccd31faa0618478ad78e11423891919a87e Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Wed, 2 Dec 2009 22:00:50 -0300 Subject: [PATCH 1024/1626] V4L/DVB (13702): [MB86A16] need to wait a bit more than the computed time for a Factor of safety Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a16.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c index 47c0d5739dd4..ad03b110f735 100644 --- a/drivers/media/dvb/frontends/mb86a16.c +++ b/drivers/media/dvb/frontends/mb86a16.c @@ -417,7 +417,8 @@ static int signal_det(struct mb86a16_state *state, int ret ; int smrtd ; int wait_sym ; - int wait_t ; + + u32 wait_t; unsigned char S[3] ; int i ; @@ -1429,6 +1430,7 @@ static int mb86a16_set_fe(struct mb86a16_state *state) S2T = 7; S4T = 2; S5T = 8; ETH = 7; VIA = 2; wait_t = 7 + (2097152 + state->srate / 2) / state->srate; } + wait_t *= 2; /* FOS */ S2T_set(state, S2T); S45T_set(state, S4T, S5T); Vi_set(state, ETH, VIA); From 776c3ebe9678f86b9b0e72d541208bb39f9551c6 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Wed, 2 Dec 2009 22:01:39 -0300 Subject: [PATCH 1025/1626] V4L/DVB (13703): [MB86A16] Fix wrong message printed out Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a16.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c index ad03b110f735..82b127144615 100644 --- a/drivers/media/dvb/frontends/mb86a16.c +++ b/drivers/media/dvb/frontends/mb86a16.c @@ -1475,7 +1475,7 @@ static int mb86a16_set_fe(struct mb86a16_state *state) SEQ_set(state, 1); } } else { - dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL"); + dprintk(verbose, MB86A16_INFO, 1, "NO -- SYNC"); SEQ_set(state, 1); } } From 071e3060a5f482e5948608d55e28bc7f5dd759cd Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Wed, 2 Dec 2009 22:02:19 -0300 Subject: [PATCH 1026/1626] V4L/DVB (13704): [MB86A16] FIX: Don't loop again, if we have SYNC Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a16.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c index 82b127144615..361e47623467 100644 --- a/drivers/media/dvb/frontends/mb86a16.c +++ b/drivers/media/dvb/frontends/mb86a16.c @@ -1487,6 +1487,7 @@ static int mb86a16_set_fe(struct mb86a16_state *state) if (sync) { dprintk(verbose, MB86A16_INFO, 1, "******* SYNC *******"); freqerr_chk(state, state->frequency, state->srate, 1); + break; } } From bd1fcac0148fb4a44395227edb0ff8ee31e09de1 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Wed, 2 Dec 2009 22:06:15 -0300 Subject: [PATCH 1027/1626] V4L/DVB (13705): [Mantis] FIX: Do not return IRQ_HANDLED in the unlikely case Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_pci.c | 328 ++++++++++++++++++++++++++ 1 file changed, 328 insertions(+) create mode 100644 drivers/media/dvb/mantis/mantis_pci.c diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c new file mode 100644 index 000000000000..68ff1b2a0b3d --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -0,0 +1,328 @@ +/* + Mantis PCI bridge driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include "mantis_common.h" +#include "mantis_core.h" + +#include +#include +#include +#include + +unsigned int verbose = 1; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)"); + +unsigned int devs; + +#define PCI_VENDOR_ID_MANTIS 0x1822 +#define PCI_DEVICE_ID_MANTIS_R11 0x4e35 +#define DRIVER_NAME "Mantis" + +static struct pci_device_id mantis_pci_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_MANTIS, PCI_DEVICE_ID_MANTIS_R11) }, + { 0 }, +}; + +MODULE_DEVICE_TABLE(pci, mantis_pci_table); + +static irqreturn_t mantis_pci_irq(int irq, void *dev_id) +{ + int i = 0, interrupts = 0; + u32 stat = 0, mask = 0, lstat = 0, mstat = 0; + struct mantis_pci *mantis; + + mantis = (struct mantis_pci *) dev_id; + if (unlikely(mantis == NULL)) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis == NULL"); + return IRQ_NONE; + } + stat = mmread(MANTIS_INT_STAT); + mask = mmread(MANTIS_INT_MASK); + mstat = lstat = stat & ~MANTIS_INT_RISCSTAT; + + if (!(stat & mask)) { + dprintk(verbose, MANTIS_DEBUG, 1, "Not ours !"); + return IRQ_NONE; + } + mmwrite(lstat, MANTIS_INT_STAT); + interrupts = hweight32(stat); + dprintk(verbose, MANTIS_DEBUG, 0, "=== Interrupts[%04x/%04x]=%d [", stat, mask, interrupts); + + while (lstat) { + if (lstat & MANTIS_INT_RISCEN) { + dprintk(verbose, MANTIS_DEBUG, 0, "* DMA enabl *"); + lstat &= ~MANTIS_INT_RISCEN; + + } else if (lstat & MANTIS_INT_I2CRACK) { + dprintk(verbose, MANTIS_DEBUG, 0, "* I2C R-ACK *"); + mantis->mantis_int_stat = stat; + mantis->mantis_int_mask = mask; + wake_up(&mantis->i2c_wq); + lstat &= ~MANTIS_INT_I2CRACK; + + } else if (lstat & MANTIS_INT_PCMCIA7) { + dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-07 *"); + lstat &= ~MANTIS_INT_PCMCIA7; + + } else if (lstat & MANTIS_INT_PCMCIA6) { + dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-06 *"); + lstat &= ~MANTIS_INT_PCMCIA6; + + } else if (lstat & MANTIS_INT_PCMCIA5) { + dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-05 *"); + lstat &= ~MANTIS_INT_PCMCIA5; + + } else if (lstat & MANTIS_INT_PCMCIA4) { + dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-04 *"); + lstat &= ~MANTIS_INT_PCMCIA4; + + } else if (lstat & MANTIS_INT_PCMCIA3) { + dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-03 *"); + lstat &= ~MANTIS_INT_PCMCIA3; + + } else if (lstat & MANTIS_INT_PCMCIA2) { + dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-02 *"); + lstat &= ~MANTIS_INT_PCMCIA2; + + } else if (lstat & MANTIS_INT_PCMCIA1) { + dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-01 *"); + lstat &= ~MANTIS_INT_PCMCIA1; + + } else if (lstat & MANTIS_INT_PCMCIA0) { + dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-00 *"); + lstat &= ~MANTIS_INT_PCMCIA0; + + } else if (lstat & MANTIS_INT_IRQ0) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-0 *"); + lstat &= ~MANTIS_INT_IRQ0; + + } else if (lstat & MANTIS_INT_IRQ1) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-1 *"); + lstat &= ~MANTIS_INT_IRQ1; + + } else if (lstat & MANTIS_INT_OCERR) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT OCERR *"); + lstat &= ~MANTIS_INT_OCERR; + + } else if (lstat & MANTIS_INT_PABORT) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT PABRT *"); + lstat &= ~MANTIS_INT_PABORT; + + } else if (lstat & MANTIS_INT_RIPERR) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT RIPRR *"); + lstat &= ~MANTIS_INT_RIPERR; + + } else if (lstat & MANTIS_INT_PPERR) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT PPERR *"); + lstat &= ~MANTIS_INT_PPERR; + + } else if (lstat & MANTIS_INT_FTRGT) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT FTRGT *"); + lstat &= ~MANTIS_INT_FTRGT; + + } else if (lstat & MANTIS_INT_RISCI) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT RISCI *"); + mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28; + tasklet_schedule(&mantis->tasklet); + lstat &= ~MANTIS_INT_RISCI; + + } else if (lstat & MANTIS_INT_I2CDONE) { + dprintk(verbose, MANTIS_DEBUG, 0, "* I2C DONE *"); + mantis->mantis_int_stat = stat; + mantis->mantis_int_mask = mask; + lstat &= ~MANTIS_INT_I2CDONE; + } else { + dprintk(verbose, MANTIS_DEBUG, 0, + "* Unknown [%04x/%04x] *", stat, mask); + break; + } + i++; + if (i > interrupts) { + dprintk(verbose, MANTIS_ERROR, 1, "going Loopy ! -- BREAK --"); + break; + } + } + dprintk(verbose, MANTIS_DEBUG, 0, "] ===\n"); + + return IRQ_HANDLED; +} + + +static int __devinit mantis_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *mantis_pci_table) +{ + u8 revision, latency; + struct mantis_pci *mantis; + int ret = 0; + + devs++; + + mantis = kmalloc(sizeof (struct mantis_pci), GFP_KERNEL); + if (mantis == NULL) { + printk("%s: Out of memory\n", __func__); + ret = -ENOMEM; + goto err; + } + memset(mantis, 0, sizeof (struct mantis_pci)); + mantis->num = devs; + if (pci_enable_device(pdev)) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis PCI enable failed"); + ret = -ENODEV; + goto err; + } + mantis->mantis_addr = pci_resource_start(pdev, 0); + if (!request_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0), DRIVER_NAME)) { + ret = -ENODEV; + goto err0; + } + + if ((mantis->mantis_mmio = ioremap(mantis->mantis_addr, 0x1000)) == NULL) { + dprintk(verbose, MANTIS_ERROR, 1, "IO remap failed"); + ret = -ENODEV; + goto err1; + } + + // Clear and disable all interrupts at startup + // to avoid lockup situations + mmwrite(0x00, MANTIS_INT_MASK); + if (request_irq(pdev->irq, mantis_pci_irq, IRQF_SHARED | IRQF_DISABLED, + DRIVER_NAME, mantis) < 0) { + + dprintk(verbose, MANTIS_ERROR, 1, "Mantis IRQ reg failed"); + ret = -ENODEV; + goto err2; + } + pci_set_master(pdev); + pci_set_drvdata(pdev, mantis); + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency); + pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision); + mantis->latency = latency; + mantis->revision = revision; + mantis->pdev = pdev; + init_waitqueue_head(&mantis->i2c_wq); + + // CAM bypass + //mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_IRQ1, MANTIS_INT_MASK); + dprintk(verbose, MANTIS_INFO, 1, "gpif status: %04x irqcfg: %04x", mmread(0x9c), mmread(0x98)); + if ((mmread(0x9c) & 0x200) != 0) { //CAM inserted + msleep_interruptible(1); + if ((mmread(0x9c) & 0x200) != 0) + mmwrite(((mmread(0x98) | 0x01) & ~0x02), 0x98); + else + mmwrite(((mmread(0x98) | 0x02) & ~0x01), 0x98); + + } else { + mmwrite(((mmread(0x98) | 0x02) & ~0x01), 0x98); + } + mantis_set_direction(mantis, 0); + + // default latency if none specified + if (!latency) + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 32); + dprintk(verbose, MANTIS_ERROR, 0, "Mantis Rev %d, ", + mantis->revision); + + dprintk(verbose, MANTIS_ERROR, 0, + "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n", + pdev->irq, mantis->latency, + mantis->mantis_addr, mantis->mantis_mmio); + + // No more PCI specific stuff ! + if (mantis_core_init(mantis) < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis core init failed"); + ret = -ENODEV; + goto err2; + } + + return 0; + + // Error conditions .. +err2: + dprintk(verbose, MANTIS_DEBUG, 1, "Err: IO Unmap"); + if (mantis->mantis_mmio) + iounmap(mantis->mantis_mmio); +err1: + dprintk(verbose, MANTIS_DEBUG, 1, "Err: Release regions"); + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + pci_disable_device(pdev); +err0: + dprintk(verbose, MANTIS_DEBUG, 1, "Err: Free"); + kfree(mantis); +err: + dprintk(verbose, MANTIS_DEBUG, 1, "Err:"); + return ret; +} + +static void __devexit mantis_pci_remove(struct pci_dev *pdev) +{ + struct mantis_pci *mantis = pci_get_drvdata(pdev); + + if (mantis == NULL) { + dprintk(verbose, MANTIS_ERROR, 1, "Aeio, Mantis NULL ptr"); + return; + } + mantis_core_exit(mantis); + dprintk(verbose, MANTIS_ERROR, 1, "Removing -->Mantis irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p", + pdev->irq, mantis->latency, mantis->mantis_addr, + mantis->mantis_mmio); + + free_irq(pdev->irq, mantis); + pci_release_regions(pdev); + if (mantis_dma_exit(mantis) < 0) + dprintk(verbose, MANTIS_ERROR, 1, "DMA exit failed"); + + pci_set_drvdata(pdev, NULL); + pci_disable_device(pdev); + kfree(mantis); +} + +static struct pci_driver mantis_pci_driver = { + .name = DRIVER_NAME, + .id_table = mantis_pci_table, + .probe = mantis_pci_probe, + .remove = mantis_pci_remove, +}; + +static int __devinit mantis_pci_init(void) +{ + return pci_register_driver(&mantis_pci_driver); +} + +static void __devexit mantis_pci_exit(void) +{ + pci_unregister_driver(&mantis_pci_driver); +} + +module_init(mantis_pci_init); +module_exit(mantis_pci_exit); + +MODULE_DESCRIPTION("Mantis PCI DTV bridge driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); From df0cca174b4d85ea041509a13e5e68b377758bf1 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Wed, 2 Dec 2009 22:07:24 -0300 Subject: [PATCH 1028/1626] V4L/DVB (13706): [MB86A16] Overhaul * better ISR handling * I2C fixes * better handling of configurations Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_common.h | 14 +- drivers/media/dvb/mantis/mantis_core.c | 95 +++++++------ drivers/media/dvb/mantis/mantis_dvb.c | 13 +- drivers/media/dvb/mantis/mantis_i2c.c | 68 ++++----- drivers/media/dvb/mantis/mantis_pci.c | 170 +++++++++-------------- drivers/media/dvb/mantis/mantis_vp1033.c | 8 ++ drivers/media/dvb/mantis/mantis_vp1033.h | 6 +- drivers/media/dvb/mantis/mantis_vp1034.c | 8 ++ drivers/media/dvb/mantis/mantis_vp1034.h | 7 +- drivers/media/dvb/mantis/mantis_vp2033.c | 20 ++- drivers/media/dvb/mantis/mantis_vp2033.h | 6 +- drivers/media/dvb/mantis/mantis_vp3030.c | 10 +- drivers/media/dvb/mantis/mantis_vp3030.h | 8 +- 13 files changed, 215 insertions(+), 218 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index ba360f884967..60a7457b2b98 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -65,10 +65,19 @@ #define mmaor(dat, addr) mmwrite((dat) | ((mask) & mmread(addr)), addr) +struct mantis_hwconfig { + char *model_name; + char *dev_type; +}; + + struct mantis_pci { /* PCI stuff */ u16 vendor_id; u16 device_id; + u16 subsystem_vendor; + u16 subsystem_device; + u8 latency; struct pci_dev *pdev; @@ -110,7 +119,7 @@ struct mantis_pci { u8 feeds; - struct mantis_config *config; + struct mantis_hwconfig *hwconfig; u32 mantis_int_stat; u32 mantis_int_mask; @@ -121,7 +130,8 @@ struct mantis_pci { u32 sub_device_id; /* A12 A13 A14 */ - int gpio_status;}; + int gpio_status; +}; extern unsigned int verbose; extern unsigned int devs; diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c index 111227752452..1012959499a2 100644 --- a/drivers/media/dvb/mantis/mantis_core.c +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -20,7 +20,10 @@ #include "mantis_common.h" #include "mantis_core.h" - +#include "mantis_vp1033.h" +#include "mantis_vp1034.h" +#include "mantis_vp2033.h" +#include "mantis_vp3030.h" static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) { @@ -45,7 +48,7 @@ static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) return err; } - msleep_interruptible(2); +// msleep_interruptible(2); return 0; } @@ -72,41 +75,6 @@ static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) return 0; } -static int get_subdevice_id(struct mantis_pci *mantis) -{ - int err; - static u8 sub_device_id[2]; - - mantis->sub_device_id = 0; - sub_device_id[0] = 0xfc; - if ((err = read_eeprom_byte(mantis, &sub_device_id[0], 2)) < 0) { - dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error"); - return err; - } - mantis->sub_device_id = (sub_device_id[0] << 8) | sub_device_id[1]; - dprintk(verbose, MANTIS_ERROR, 1, "Sub Device ID=[0x%04x]", - mantis->sub_device_id); - - return 0; -} - -static int get_subvendor_id(struct mantis_pci *mantis) -{ - int err; - static u8 sub_vendor_id[2]; - - mantis->sub_vendor_id = 0; - sub_vendor_id[0] = 0xfe; - if ((err = read_eeprom_byte(mantis, &sub_vendor_id[0], 2)) < 0) { - dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error"); - return err; - } - mantis->sub_vendor_id = (sub_vendor_id[0] << 8) | sub_vendor_id[1]; - dprintk(verbose, MANTIS_ERROR, 1, "Sub Vendor ID=[0x%04x]", - mantis->sub_vendor_id); - - return 0; -} static int get_mac_address(struct mantis_pci *mantis) { @@ -118,8 +86,8 @@ static int get_mac_address(struct mantis_pci *mantis) return err; } - dprintk(verbose, MANTIS_ERROR, 1, - "MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]", + dprintk(verbose, MANTIS_ERROR, 0, + " MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n", mantis->mac_address[0], mantis->mac_address[1], mantis->mac_address[2], mantis->mac_address[3], mantis->mac_address[4], mantis->mac_address[5]); @@ -127,11 +95,51 @@ static int get_mac_address(struct mantis_pci *mantis) return 0; } +#define MANTIS_MODEL_UNKNOWN "UNKNOWN" +#define MANTIS_DEV_UNKNOWN "UNKNOWN" + +struct mantis_hwconfig unknown_device = { + .model_name = MANTIS_MODEL_UNKNOWN, + .dev_type = MANTIS_DEV_UNKNOWN, +}; + +static void mantis_load_config(struct mantis_pci *mantis) +{ + switch (mantis->subsystem_device) { + case MANTIS_VP_1033_DVB_S: // VP-1033 + mantis->hwconfig = &vp1033_mantis_config; + break; + case MANTIS_VP_1034_DVB_S: // VP-1034 + mantis->hwconfig = &vp1034_mantis_config; + break; + case MANTIS_VP_2033_DVB_C: // VP-2033 + mantis->hwconfig = &vp2033_mantis_config; + break; + case MANTIS_VP_3030_DVB_T: // VP-3030 + mantis->hwconfig = &vp3030_mantis_config; + break; + default: + mantis->hwconfig = &unknown_device; + break; + } +} int mantis_core_init(struct mantis_pci *mantis) { int err = 0; + mantis_load_config(mantis); + dprintk(verbose, MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n", + mantis->hwconfig->model_name, mantis->hwconfig->dev_type, + mantis->pdev->bus->number, PCI_SLOT(mantis->pdev->devfn), PCI_FUNC(mantis->pdev->devfn)); + dprintk(verbose, MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ", + mantis->revision, + mantis->subsystem_vendor, mantis->subsystem_device); + dprintk(verbose, MANTIS_ERROR, 0, + "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n", + mantis->pdev->irq, mantis->latency, + mantis->mantis_addr, mantis->mantis_mmio); + if ((err = mantis_i2c_init(mantis)) < 0) { dprintk(verbose, MANTIS_ERROR, 1, "Mantis I2C init failed"); return err; @@ -140,14 +148,6 @@ int mantis_core_init(struct mantis_pci *mantis) dprintk(verbose, MANTIS_ERROR, 1, "get MAC address failed"); return err; } - if ((err = get_subvendor_id(mantis)) < 0) { - dprintk(verbose, MANTIS_ERROR, 1, "get Sub vendor ID failed"); - return err; - } - if ((err = get_subdevice_id(mantis)) < 0) { - dprintk(verbose, MANTIS_ERROR, 1, "get Sub device ID failed"); - return err; - } if ((err = mantis_dma_init(mantis)) < 0) { dprintk(verbose, MANTIS_ERROR, 1, "Mantis DMA init failed"); return err; @@ -162,7 +162,6 @@ int mantis_core_init(struct mantis_pci *mantis) int mantis_core_exit(struct mantis_pci *mantis) { - mantis_dma_stop(mantis); dprintk(verbose, MANTIS_ERROR, 1, "DMA engine stopping"); if (mantis_dma_exit(mantis) < 0) diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index 5830d4a7bda2..319bb8bef4e1 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -206,22 +206,13 @@ err0: return result; } -#define MANTIS_VP_1027_DVB_S 0x0013 -#define MANTIS_VP_1033_DVB_S 0x0016 -#define MANTIS_VP_1034_DVB_S 0x0014 -#define MANTIS_VP_1040_DVB_S2 -#define MANTIS_VP_1041_DVB_S2 -#define MANTIS_VP_2033_DVB_C 0x0008 -#define MANTIS_VP_3024_DVB_T 0x0009 -#define MANTIS_VP_3030_DVB_T 0x0024 - int __devinit mantis_frontend_init(struct mantis_pci *mantis) { dprintk(verbose, MANTIS_DEBUG, 1, "Mantis frontend Init"); mantis_fe_powerup(mantis); mantis_frontend_reset(mantis); - dprintk(verbose, MANTIS_DEBUG, 1, "Device ID=%02x", mantis->sub_device_id); - switch (mantis->sub_device_id) { + dprintk(verbose, MANTIS_DEBUG, 1, "Device ID=%02x", mantis->subsystem_device); + switch (mantis->subsystem_device) { case MANTIS_VP_1033_DVB_S: // VP-1033 dprintk(verbose, MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)"); mantis->fe = stv0299_attach(&lgtdqcs001f_config, diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c index cfecb344bb7a..8b90a2af6871 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.c +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -33,32 +33,27 @@ static int mantis_ack_wait(struct mantis_pci *mantis) { int rc = 0; + u32 timeout = 0; if (wait_event_interruptible_timeout(mantis->i2c_wq, - mantis->mantis_int_stat & MANTIS_INT_I2CRACK, - msecs_to_jiffies(50)) == -ERESTARTSYS) + mantis->mantis_int_stat & MANTIS_INT_I2CDONE, + msecs_to_jiffies(50)) == -ERESTARTSYS) { + dprintk(verbose, MANTIS_DEBUG, 1, "I2C Transfer failed, Master !I2CDONE"); rc = -EREMOTEIO; -/* - // Wait till we are done - while (mantis->mantis_int_stat & MANTIS_INT_I2CRACK){ - if (mantis->mantis_int_stat & MANTIS_INT_I2CDONE) { - mantis->mantis_int_stat &= ~MANTIS_INT_I2CRACK; -// dprintk(verbose, MANTIS_DEBUG, 1, "SLAVE RACK 'ed .. Waiting for I2CDONE"); + } + while (!(mantis->mantis_int_stat & MANTIS_INT_I2CRACK)) { + dprintk(verbose, MANTIS_DEBUG, 1, "Waiting for Slave RACK"); + mantis->mantis_int_stat = mmread(MANTIS_INT_STAT); + msleep(5); + timeout++; + if (timeout > 500) { + dprintk(verbose, MANTIS_ERROR, 1, "Slave RACK Fail !"); + rc = -EREMOTEIO; break; } } - - if (mantis->mantis_int_stat & MANTIS_INT_I2CDONE) { -// dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Int I2CDONE"); - rc = 1; - } - - mantis->mantis_int_stat &= ~MANTIS_INT_I2CDONE; -*/ - // .. - if (mantis->mantis_int_stat & MANTIS_INT_I2CRACK) - msleep_interruptible(10); + udelay(350); return rc; } @@ -67,7 +62,7 @@ static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) { u32 rxd, i; - dprintk(verbose, MANTIS_DEBUG, 1, "Address=[0x%02x]", msg->addr); + dprintk(verbose, MANTIS_INFO, 0, " %s: Address=[0x%02x] [ ", __func__, msg->addr); for (i = 0; i < msg->len; i++) { rxd = (msg->addr << 25) | (1 << 24) | MANTIS_I2C_RATE_3 @@ -77,18 +72,17 @@ static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) if (i == (msg->len - 1)) rxd &= ~MANTIS_I2C_STOP; + mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); mmwrite(rxd, MANTIS_I2CDATA_CTL); - if (mantis_ack_wait(mantis) < 0) { + if (mantis_ack_wait(mantis) != 0) { dprintk(verbose, MANTIS_DEBUG, 1, "ACK failed"); - return -EIO; + return -EREMOTEIO; } rxd = mmread(MANTIS_I2CDATA_CTL); msg->buf[i] = (u8)((rxd >> 8) & 0xFF); - dprintk(verbose, MANTIS_DEBUG, 1, - "Data=[0x%02x]", i, msg->buf[i]); - - msleep_interruptible(2); + dprintk(verbose, MANTIS_INFO, 0, "%02x ", msg->buf[i]); } + dprintk(verbose, MANTIS_INFO, 0, "]\n"); return 0; } @@ -98,9 +92,9 @@ static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg int i; u32 txd = 0; - dprintk(verbose, MANTIS_DEBUG, 1, "Address=[0x%02x]", msg->addr); + dprintk(verbose, MANTIS_INFO, 0, " %s: Address=[0x%02x] [ ", __func__, msg->addr); for (i = 0; i < msg->len; i++) { - dprintk(verbose, MANTIS_DEBUG, 1, "Data=[0x%02x]", i, msg->buf[i]); + dprintk(verbose, MANTIS_INFO, 0, "%02x ", msg->buf[i]); txd = (msg->addr << 25) | (msg->buf[i] << 8) | MANTIS_I2C_RATE_3 | MANTIS_I2C_STOP @@ -109,13 +103,14 @@ static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg if (i == (msg->len - 1)) txd &= ~MANTIS_I2C_STOP; + mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); mmwrite(txd, MANTIS_I2CDATA_CTL); - if (mantis_ack_wait(mantis) < 0) { + if (mantis_ack_wait(mantis) != 0) { dprintk(verbose, MANTIS_DEBUG, 1, "ACK failed"); - return -1; + return -EREMOTEIO; } - udelay(500); } + dprintk(verbose, MANTIS_INFO, 0, "]\n"); return 0; } @@ -159,7 +154,7 @@ static struct i2c_adapter mantis_i2c_adapter = { int __devinit mantis_i2c_init(struct mantis_pci *mantis) { - u32 intstat; + u32 intstat, intmask; memcpy(&mantis->adapter, &mantis_i2c_adapter, sizeof (mantis_i2c_adapter)); i2c_set_adapdata(&mantis->adapter, mantis); @@ -169,15 +164,12 @@ int __devinit mantis_i2c_init(struct mantis_pci *mantis) dprintk(verbose, MANTIS_DEBUG, 1, "Initializing I2C .."); - // Clear all interrupts intstat = mmread(MANTIS_INT_STAT); + intmask = mmread(MANTIS_INT_MASK); mmwrite(intstat, MANTIS_INT_STAT); + mmwrite(intmask | MANTIS_INT_I2CDONE, MANTIS_INT_MASK); - mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_I2CDONE, - MANTIS_INT_MASK); - - dprintk(verbose, MANTIS_DEBUG, 1, "[0x%08x/%08x]", - mmread(MANTIS_INT_STAT), mmread(MANTIS_INT_MASK)); + dprintk(verbose, MANTIS_DEBUG, 1, "[0x%08x/%08x]", intstat, intmask); return 0; } diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c index 68ff1b2a0b3d..0bc25d2778f5 100644 --- a/drivers/media/dvb/mantis/mantis_pci.c +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -52,7 +52,6 @@ MODULE_DEVICE_TABLE(pci, mantis_pci_table); static irqreturn_t mantis_pci_irq(int irq, void *dev_id) { - int i = 0, interrupts = 0; u32 stat = 0, mask = 0, lstat = 0, mstat = 0; struct mantis_pci *mantis; @@ -64,109 +63,67 @@ static irqreturn_t mantis_pci_irq(int irq, void *dev_id) stat = mmread(MANTIS_INT_STAT); mask = mmread(MANTIS_INT_MASK); mstat = lstat = stat & ~MANTIS_INT_RISCSTAT; - - if (!(stat & mask)) { - dprintk(verbose, MANTIS_DEBUG, 1, "Not ours !"); + if (!(stat & mask)) return IRQ_NONE; + + mantis->mantis_int_stat = stat; + mantis->mantis_int_mask = mask; + dprintk(verbose, MANTIS_DEBUG, 0, "=== Interrupts[%04x/%04x]= [", stat, mask); + if (stat & MANTIS_INT_RISCEN) { + dprintk(verbose, MANTIS_DEBUG, 0, "* DMA enabl *"); } - mmwrite(lstat, MANTIS_INT_STAT); - interrupts = hweight32(stat); - dprintk(verbose, MANTIS_DEBUG, 0, "=== Interrupts[%04x/%04x]=%d [", stat, mask, interrupts); - - while (lstat) { - if (lstat & MANTIS_INT_RISCEN) { - dprintk(verbose, MANTIS_DEBUG, 0, "* DMA enabl *"); - lstat &= ~MANTIS_INT_RISCEN; - - } else if (lstat & MANTIS_INT_I2CRACK) { - dprintk(verbose, MANTIS_DEBUG, 0, "* I2C R-ACK *"); - mantis->mantis_int_stat = stat; - mantis->mantis_int_mask = mask; - wake_up(&mantis->i2c_wq); - lstat &= ~MANTIS_INT_I2CRACK; - - } else if (lstat & MANTIS_INT_PCMCIA7) { - dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-07 *"); - lstat &= ~MANTIS_INT_PCMCIA7; - - } else if (lstat & MANTIS_INT_PCMCIA6) { - dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-06 *"); - lstat &= ~MANTIS_INT_PCMCIA6; - - } else if (lstat & MANTIS_INT_PCMCIA5) { - dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-05 *"); - lstat &= ~MANTIS_INT_PCMCIA5; - - } else if (lstat & MANTIS_INT_PCMCIA4) { - dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-04 *"); - lstat &= ~MANTIS_INT_PCMCIA4; - - } else if (lstat & MANTIS_INT_PCMCIA3) { - dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-03 *"); - lstat &= ~MANTIS_INT_PCMCIA3; - - } else if (lstat & MANTIS_INT_PCMCIA2) { - dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-02 *"); - lstat &= ~MANTIS_INT_PCMCIA2; - - } else if (lstat & MANTIS_INT_PCMCIA1) { - dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-01 *"); - lstat &= ~MANTIS_INT_PCMCIA1; - - } else if (lstat & MANTIS_INT_PCMCIA0) { - dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-00 *"); - lstat &= ~MANTIS_INT_PCMCIA0; - - } else if (lstat & MANTIS_INT_IRQ0) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-0 *"); - lstat &= ~MANTIS_INT_IRQ0; - - } else if (lstat & MANTIS_INT_IRQ1) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-1 *"); - lstat &= ~MANTIS_INT_IRQ1; - - } else if (lstat & MANTIS_INT_OCERR) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT OCERR *"); - lstat &= ~MANTIS_INT_OCERR; - - } else if (lstat & MANTIS_INT_PABORT) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT PABRT *"); - lstat &= ~MANTIS_INT_PABORT; - - } else if (lstat & MANTIS_INT_RIPERR) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT RIPRR *"); - lstat &= ~MANTIS_INT_RIPERR; - - } else if (lstat & MANTIS_INT_PPERR) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT PPERR *"); - lstat &= ~MANTIS_INT_PPERR; - - } else if (lstat & MANTIS_INT_FTRGT) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT FTRGT *"); - lstat &= ~MANTIS_INT_FTRGT; - - } else if (lstat & MANTIS_INT_RISCI) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT RISCI *"); - mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28; - tasklet_schedule(&mantis->tasklet); - lstat &= ~MANTIS_INT_RISCI; - - } else if (lstat & MANTIS_INT_I2CDONE) { - dprintk(verbose, MANTIS_DEBUG, 0, "* I2C DONE *"); - mantis->mantis_int_stat = stat; - mantis->mantis_int_mask = mask; - lstat &= ~MANTIS_INT_I2CDONE; - } else { - dprintk(verbose, MANTIS_DEBUG, 0, - "* Unknown [%04x/%04x] *", stat, mask); - break; - } - i++; - if (i > interrupts) { - dprintk(verbose, MANTIS_ERROR, 1, "going Loopy ! -- BREAK --"); - break; - } + if (stat & MANTIS_INT_I2CRACK) { + dprintk(verbose, MANTIS_DEBUG, 0, "* I2C R-ACK *"); +// wake_up(&mantis->i2c_wq); } + if (stat & MANTIS_INT_PCMCIA7) { + dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-07 *"); + } + if (stat & MANTIS_INT_IRQ0) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-0 *"); + } + if (stat & MANTIS_INT_IRQ1) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-1 *"); + } + if (stat & MANTIS_INT_OCERR) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT OCERR *"); + } + if (stat & MANTIS_INT_PABORT) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT PABRT *"); + } + if (stat & MANTIS_INT_RIPERR) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT RIPRR *"); + } + if (stat & MANTIS_INT_PPERR) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT PPERR *"); + } + if (stat & MANTIS_INT_FTRGT) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT FTRGT *"); + } + if (stat & MANTIS_INT_RISCI) { + dprintk(verbose, MANTIS_DEBUG, 0, "* INT RISCI *"); + mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28; + tasklet_schedule(&mantis->tasklet); + } + if (stat & MANTIS_INT_I2CDONE) { + dprintk(verbose, MANTIS_DEBUG, 0, "* I2C DONE *"); + wake_up(&mantis->i2c_wq); + } + mmwrite(stat, MANTIS_INT_STAT); + stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE | + MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 | + MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 | + MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 | + MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 | + MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 | + MANTIS_INT_IRQ0 | MANTIS_INT_OCERR | + MANTIS_INT_PABORT | MANTIS_INT_RIPERR | + MANTIS_INT_PPERR | MANTIS_INT_FTRGT | + MANTIS_INT_RISCI); + + if (stat) + dprintk(verbose, MANTIS_DEBUG, 0, "* Unknown [%04x] *", stat); + dprintk(verbose, MANTIS_DEBUG, 0, "] ===\n"); return IRQ_HANDLED; @@ -180,8 +137,6 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, struct mantis_pci *mantis; int ret = 0; - devs++; - mantis = kmalloc(sizeof (struct mantis_pci), GFP_KERNEL); if (mantis == NULL) { printk("%s: Out of memory\n", __func__); @@ -190,6 +145,8 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, } memset(mantis, 0, sizeof (struct mantis_pci)); mantis->num = devs; + devs++; + if (pci_enable_device(pdev)) { dprintk(verbose, MANTIS_ERROR, 1, "Mantis PCI enable failed"); ret = -ENODEV; @@ -225,11 +182,13 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, mantis->latency = latency; mantis->revision = revision; mantis->pdev = pdev; + mantis->subsystem_vendor = pdev->subsystem_vendor; + mantis->subsystem_device = pdev->subsystem_device; init_waitqueue_head(&mantis->i2c_wq); // CAM bypass //mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_IRQ1, MANTIS_INT_MASK); - dprintk(verbose, MANTIS_INFO, 1, "gpif status: %04x irqcfg: %04x", mmread(0x9c), mmread(0x98)); + dprintk(verbose, MANTIS_INFO, 0, "\ngpif status: %04x irqcfg: %04x\n", mmread(0x9c), mmread(0x98)); if ((mmread(0x9c) & 0x200) != 0) { //CAM inserted msleep_interruptible(1); if ((mmread(0x9c) & 0x200) != 0) @@ -242,11 +201,8 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, } mantis_set_direction(mantis, 0); - // default latency if none specified if (!latency) pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 32); - dprintk(verbose, MANTIS_ERROR, 0, "Mantis Rev %d, ", - mantis->revision); dprintk(verbose, MANTIS_ERROR, 0, "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n", diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c index 720f4fb7e925..07fcc45b7f67 100644 --- a/drivers/media/dvb/mantis/mantis_vp1033.c +++ b/drivers/media/dvb/mantis/mantis_vp1033.c @@ -81,6 +81,14 @@ struct stv0299_config lgtdqcs001f_config = { // .pll_set = lgtdqcs001f_pll_set, }; +#define MANTIS_MODEL_NAME "VP-1033" +#define MANTIS_DEV_TYPE "DVB-S/DSS" + +struct mantis_hwconfig vp1033_mantis_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, +}; + int lgtdqcs001f_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { diff --git a/drivers/media/dvb/mantis/mantis_vp1033.h b/drivers/media/dvb/mantis/mantis_vp1033.h index d50f09233ffb..e24570659d55 100644 --- a/drivers/media/dvb/mantis/mantis_vp1033.h +++ b/drivers/media/dvb/mantis/mantis_vp1033.h @@ -21,10 +21,14 @@ #ifndef __MANTIS_VP1033_H #define __MANTIS_VP1033_H -#include "stv0299.h" #include "dvb_frontend.h" +#include "mantis_common.h" +#include "stv0299.h" + +#define MANTIS_VP_1033_DVB_S 0x0016 extern struct stv0299_config lgtdqcs001f_config; +extern struct mantis_hwconfig vp1033_mantis_config; extern int lgtdqcs001f_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params); diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c index b85ac29691d0..c9c947911627 100644 --- a/drivers/media/dvb/mantis/mantis_vp1034.c +++ b/drivers/media/dvb/mantis/mantis_vp1034.c @@ -26,6 +26,14 @@ struct mb86a16_config vp1034_config = { .set_voltage = vp1034_set_voltage, }; +#define MANTIS_MODEL_NAME "VP-1034" +#define MANTIS_DEV_TYPE "DVB-S/DSS" + +struct mantis_hwconfig vp1034_mantis_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, +}; + int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { struct mantis_pci *mantis = fe->dvb->priv; diff --git a/drivers/media/dvb/mantis/mantis_vp1034.h b/drivers/media/dvb/mantis/mantis_vp1034.h index 2324dada09de..21948573b087 100644 --- a/drivers/media/dvb/mantis/mantis_vp1034.h +++ b/drivers/media/dvb/mantis/mantis_vp1034.h @@ -21,9 +21,14 @@ #ifndef __MANTIS_VP1034_H #define __MANTIS_VP1034_H -#include "mb86a16.h" #include "dvb_frontend.h" +#include "mantis_common.h" +#include "mb86a16.h" + +#define MANTIS_VP_1034_DVB_S 0x0014 + +extern struct mantis_hwconfig vp1034_mantis_config; extern struct mb86a16_config vp1034_config; extern int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage); diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c index bca9ebaf39d7..e98959769120 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.c +++ b/drivers/media/dvb/mantis/mantis_vp2033.c @@ -32,9 +32,17 @@ struct tda10021_state { u8 reg0; }; +#define MANTIS_MODEL_NAME "VP-2033" +#define MANTIS_DEV_TYPE "DVB-C" + +struct mantis_hwconfig vp2033_mantis_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, +}; + struct cu1216_config philips_cu1216_config = { - .demod_address = 0x18 >> 1, - .pll_set = philips_cu1216_tuner_set, + .demod_address = 0x18 >> 1, + .pll_set = philips_cu1216_tuner_set, // .fe_reset = mantis_fe_reset, }; @@ -47,10 +55,10 @@ int philips_cu1216_tuner_set(struct dvb_frontend *fe, u8 buf[4]; struct i2c_msg msg = { - .addr = 0xc0 >> 1, - .flags = 0, - .buf = buf, - .len = sizeof (buf) + .addr = 0xc0 >> 1, + .flags = 0, + .buf = buf, + .len = sizeof (buf) }; #define TUNER_MUL 62500 diff --git a/drivers/media/dvb/mantis/mantis_vp2033.h b/drivers/media/dvb/mantis/mantis_vp2033.h index 29baba180961..513c491942cb 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.h +++ b/drivers/media/dvb/mantis/mantis_vp2033.h @@ -21,10 +21,14 @@ #ifndef __MANTIS_VP2033_H #define __MANTIS_VP2033_H -#include "cu1216.h" #include "dvb_frontend.h" +#include "mantis_common.h" +#include "cu1216.h" + +#define MANTIS_VP_2033_DVB_C 0x0008 extern struct cu1216_config philips_cu1216_config; +extern struct mantis_hwconfig vp2033_mantis_config; extern int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params); diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c index f44f226ce9ab..8043e5d9218d 100644 --- a/drivers/media/dvb/mantis/mantis_vp3030.c +++ b/drivers/media/dvb/mantis/mantis_vp3030.c @@ -22,7 +22,15 @@ #include "mantis_vp3030.h" struct zl10353_config mantis_vp3030_config = { - .demod_address = 0x0f, + .demod_address = 0x0f, +}; + +#define MANTIS_MODEL_NAME "VP-3030" +#define MANTIS_DEV_TYPE "DVB-T" + +struct mantis_hwconfig vp3030_mantis_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, }; int panasonic_en57h12d5_set_params(struct dvb_frontend *fe, diff --git a/drivers/media/dvb/mantis/mantis_vp3030.h b/drivers/media/dvb/mantis/mantis_vp3030.h index f8e72cce7e69..acc50a48e18f 100644 --- a/drivers/media/dvb/mantis/mantis_vp3030.h +++ b/drivers/media/dvb/mantis/mantis_vp3030.h @@ -21,10 +21,14 @@ #ifndef __MANTIS_VP3030_H #define __MANTIS_VP3030_H -#include "zl10353.h" -#include "dvb-pll.h" #include "dvb_frontend.h" +#include "mantis_common.h" +#include "dvb-pll.h" +#include "zl10353.h" + +#define MANTIS_VP_3030_DVB_T 0x0024 extern struct zl10353_config mantis_vp3030_config; +extern struct mantis_hwconfig vp3030_mantis_config; #endif // __MANTIS_VP3030_H From 55172773c57221c7c81e445d04f811f2f0478c3e Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Wed, 2 Dec 2009 22:09:53 -0300 Subject: [PATCH 1029/1626] V4L/DVB (13707): [Mantis] Whitespace cleanup Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_common.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index 60a7457b2b98..d39cbe0f2414 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -83,7 +83,7 @@ struct mantis_pci { struct pci_dev *pdev; unsigned long mantis_addr; - volatile void __iomem *mantis_mmio; + volatile void __iomem *mantis_mmio; u8 irq; u8 revision; @@ -121,8 +121,8 @@ struct mantis_pci { struct mantis_hwconfig *hwconfig; - u32 mantis_int_stat; - u32 mantis_int_mask; + u32 mantis_int_stat; + u32 mantis_int_mask; /* board specific */ u8 mac_address[8]; From da7365f46607207c8166167ba497e3cb3e02270d Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Wed, 2 Dec 2009 22:11:00 -0300 Subject: [PATCH 1030/1626] V4L/DVB (13708): [Mantis] Remove some dead code Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_core.c | 2 -- drivers/media/dvb/mantis/mantis_pci.c | 1 - drivers/media/dvb/mantis/mantis_vp2033.c | 14 +------------- 3 files changed, 1 insertion(+), 16 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c index 1012959499a2..d159ad6fc321 100644 --- a/drivers/media/dvb/mantis/mantis_core.c +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -48,7 +48,6 @@ static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) return err; } -// msleep_interruptible(2); return 0; } @@ -75,7 +74,6 @@ static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) return 0; } - static int get_mac_address(struct mantis_pci *mantis) { int err; diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c index 0bc25d2778f5..402f866e12d9 100644 --- a/drivers/media/dvb/mantis/mantis_pci.c +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -74,7 +74,6 @@ static irqreturn_t mantis_pci_irq(int irq, void *dev_id) } if (stat & MANTIS_INT_I2CRACK) { dprintk(verbose, MANTIS_DEBUG, 0, "* I2C R-ACK *"); -// wake_up(&mantis->i2c_wq); } if (stat & MANTIS_INT_PCMCIA7) { dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-07 *"); diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c index e98959769120..853b558b928e 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.c +++ b/drivers/media/dvb/mantis/mantis_vp2033.c @@ -21,17 +21,6 @@ #include "mantis_common.h" #include "mantis_vp2033.h" -struct tda10021_state { - struct i2c_adapter *i2c; - struct dvb_frontend_ops ops; - /* configuration settings */ - const struct tda10021_config *config; - struct dvb_frontend frontend; - - u8 pwm; - u8 reg0; -}; - #define MANTIS_MODEL_NAME "VP-2033" #define MANTIS_DEV_TYPE "DVB-C" @@ -49,7 +38,6 @@ struct cu1216_config philips_cu1216_config = { int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { -// struct tda10021_state *state = fe->demodulator_priv; struct mantis_pci *mantis = fe->dvb->priv; u8 buf[4]; @@ -71,11 +59,11 @@ int philips_cu1216_tuner_set(struct dvb_frontend *fe, buf[3] = (params->frequency < 150000000 ? 0xA1 : params->frequency < 445000000 ? 0x92 : 0x34); -// if (i2c_transfer(state->i2c, &msg, 1) < 0) { if (i2c_transfer(&mantis->adapter, &msg, 1) < 0) { printk("%s tuner not ack!\n", __FUNCTION__); return -EIO; } msleep(100); + return 0; } From 715d341c59d2563940ae07b12f949555ccbe3efb Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Thu, 3 Dec 2009 05:37:51 -0300 Subject: [PATCH 1031/1626] V4L/DVB (13709): [Mantis/VP-1034] Switch 13/18v for the VP-1034 properly Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_i2c.c | 10 +++++++--- drivers/media/dvb/mantis/mantis_vp1034.c | 6 ++++-- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c index 8b90a2af6871..53c5f88227be 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.c +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -39,7 +39,7 @@ static int mantis_ack_wait(struct mantis_pci *mantis) mantis->mantis_int_stat & MANTIS_INT_I2CDONE, msecs_to_jiffies(50)) == -ERESTARTSYS) { - dprintk(verbose, MANTIS_DEBUG, 1, "I2C Transfer failed, Master !I2CDONE"); + dprintk(verbose, MANTIS_DEBUG, 1, "Master !I2CDONE"); rc = -EREMOTEIO; } while (!(mantis->mantis_int_stat & MANTIS_INT_I2CRACK)) { @@ -62,7 +62,9 @@ static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) { u32 rxd, i; - dprintk(verbose, MANTIS_INFO, 0, " %s: Address=[0x%02x] [ ", __func__, msg->addr); + dprintk(verbose, MANTIS_INFO, 0, " %s: Address=[0x%02x] [ ", + __func__, msg->addr); + for (i = 0; i < msg->len; i++) { rxd = (msg->addr << 25) | (1 << 24) | MANTIS_I2C_RATE_3 @@ -92,7 +94,9 @@ static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg int i; u32 txd = 0; - dprintk(verbose, MANTIS_INFO, 0, " %s: Address=[0x%02x] [ ", __func__, msg->addr); + dprintk(verbose, MANTIS_INFO, 0, " %s: Address=[0x%02x] [ ", + __func__, msg->addr); + for (i = 0; i < msg->len; i++) { dprintk(verbose, MANTIS_INFO, 0, "%02x ", msg->buf[i]); txd = (msg->addr << 25) | (msg->buf[i] << 8) diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c index c9c947911627..f6766d0793d7 100644 --- a/drivers/media/dvb/mantis/mantis_vp1034.c +++ b/drivers/media/dvb/mantis/mantis_vp1034.c @@ -40,12 +40,14 @@ int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) switch (voltage) { case SEC_VOLTAGE_13: - mmwrite((mmread(MANTIS_GPIF_ADDR)) | voltage, MANTIS_GPIF_ADDR); dprintk(verbose, MANTIS_ERROR, 1, "Polarization=[13V]"); + gpio_set_bits(mantis, 13, 1); + gpio_set_bits(mantis, 14, 0); break; case SEC_VOLTAGE_18: - mmwrite((mmread(MANTIS_GPIF_ADDR)) & voltage, MANTIS_GPIF_ADDR); dprintk(verbose, MANTIS_ERROR, 1, "Polarization=[18V]"); + gpio_set_bits(mantis, 13, 1); + gpio_set_bits(mantis, 14, 1); break; case SEC_VOLTAGE_OFF: dprintk(verbose, MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN"); From 01a8c3eebb3c83df337f88332756f16154cecc0f Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Thu, 3 Dec 2009 05:38:33 -0300 Subject: [PATCH 1032/1626] V4L/DVB (13710): [Mantis] FIX: Use swfilter (188/204) accordingly Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_common.h | 4 +++- drivers/media/dvb/mantis/mantis_dma.c | 2 -- drivers/media/dvb/mantis/mantis_vp1033.c | 1 + drivers/media/dvb/mantis/mantis_vp1034.c | 1 + drivers/media/dvb/mantis/mantis_vp2033.c | 1 + drivers/media/dvb/mantis/mantis_vp3030.c | 1 + 6 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index d39cbe0f2414..197393e700f7 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -64,13 +64,15 @@ #define mmor(dat, addr) mmwrite((dat) | mmread(addr), addr) #define mmaor(dat, addr) mmwrite((dat) | ((mask) & mmread(addr)), addr) +#define MANTIS_TS_188 0 +#define MANTIS_TS_204 1 struct mantis_hwconfig { char *model_name; char *dev_type; + u32 ts_size; }; - struct mantis_pci { /* PCI stuff */ u16 vendor_id; diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c index 9e3aa5ec1645..b8fd1c7cd294 100644 --- a/drivers/media/dvb/mantis/mantis_dma.c +++ b/drivers/media/dvb/mantis/mantis_dma.c @@ -154,8 +154,6 @@ err: return err; } - - static inline void mantis_risc_program(struct mantis_pci *mantis) { u32 buf_pos = 0; diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c index 07fcc45b7f67..daf02c12d299 100644 --- a/drivers/media/dvb/mantis/mantis_vp1033.c +++ b/drivers/media/dvb/mantis/mantis_vp1033.c @@ -87,6 +87,7 @@ struct stv0299_config lgtdqcs001f_config = { struct mantis_hwconfig vp1033_mantis_config = { .model_name = MANTIS_MODEL_NAME, .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, }; int lgtdqcs001f_tuner_set(struct dvb_frontend *fe, diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c index f6766d0793d7..a2fe9d42d1e5 100644 --- a/drivers/media/dvb/mantis/mantis_vp1034.c +++ b/drivers/media/dvb/mantis/mantis_vp1034.c @@ -32,6 +32,7 @@ struct mb86a16_config vp1034_config = { struct mantis_hwconfig vp1034_mantis_config = { .model_name = MANTIS_MODEL_NAME, .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, }; int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c index 853b558b928e..15772fe58280 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.c +++ b/drivers/media/dvb/mantis/mantis_vp2033.c @@ -27,6 +27,7 @@ struct mantis_hwconfig vp2033_mantis_config = { .model_name = MANTIS_MODEL_NAME, .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, }; struct cu1216_config philips_cu1216_config = { diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c index 8043e5d9218d..cab092ce2306 100644 --- a/drivers/media/dvb/mantis/mantis_vp3030.c +++ b/drivers/media/dvb/mantis/mantis_vp3030.c @@ -31,6 +31,7 @@ struct zl10353_config mantis_vp3030_config = { struct mantis_hwconfig vp3030_mantis_config = { .model_name = MANTIS_MODEL_NAME, .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, }; int panasonic_en57h12d5_set_params(struct dvb_frontend *fe, From e4deee04ffda9b44f367a40dbad8306ab88cb321 Mon Sep 17 00:00:00 2001 From: Marko Ristola Date: Thu, 3 Dec 2009 05:39:22 -0300 Subject: [PATCH 1033/1626] V4L/DVB (13711): [Mantis] FIX: Do nor toggle GPIF status Signed-off-by: Marko Ristola Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_dma.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c index b8fd1c7cd294..e207870fb45d 100644 --- a/drivers/media/dvb/mantis/mantis_dma.c +++ b/drivers/media/dvb/mantis/mantis_dma.c @@ -190,7 +190,8 @@ void mantis_dma_start(struct mantis_pci *mantis) mantis_risc_program(mantis); mmwrite(cpu_to_le32(mantis->risc_dma), MANTIS_RISC_START); - mmwrite(MANTIS_GPIF_RDWRN, MANTIS_GPIF_ADDR); +// mmwrite(MANTIS_GPIF_RDWRN, MANTIS_GPIF_ADDR); + mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_RDWRN, MANTIS_GPIF_ADDR); mmwrite(0, MANTIS_DMA_CTL); mantis->last_block = mantis->finished_block = 0; @@ -210,6 +211,8 @@ void mantis_dma_stop(struct mantis_pci *mantis) mask = mmread(MANTIS_INT_MASK); dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Stop DMA engine"); + mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_RDWRN))), MANTIS_GPIF_ADDR); + mmwrite((mmread(MANTIS_DMA_CTL) & ~(MANTIS_FIFO_EN | MANTIS_DCAP_EN | MANTIS_RISC_EN)), MANTIS_DMA_CTL); From e2f67e4fb931b975058b3bd48eaac43780c92c88 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Thu, 3 Dec 2009 05:42:10 -0300 Subject: [PATCH 1034/1626] V4L/DVB (13712): [Mantis] Add locking for concurrent access Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_common.h | 2 ++ drivers/media/dvb/mantis/mantis_i2c.c | 3 +++ 2 files changed, 5 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index 197393e700f7..e354e7678a57 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -25,6 +25,7 @@ #include #include #include +#include #include "dvbdev.h" #include "dvb_demux.h" @@ -109,6 +110,7 @@ struct mantis_pci { struct i2c_adapter adapter; int i2c_rc; wait_queue_head_t i2c_wq; + struct mutex i2c_lock; /* DVB stuff */ struct dvb_adapter dvb_adapter; diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c index 53c5f88227be..39fabe572c2e 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.c +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -125,6 +125,7 @@ static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, in struct mantis_pci *mantis; mantis = i2c_get_adapdata(adapter); + mutex_lock(&mantis->i2c_lock); for (i = 0; i < num; i++) { if (msgs[i].flags & I2C_M_RD) ret = mantis_i2c_read(mantis, &msgs[i]); @@ -134,6 +135,7 @@ static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, in if (ret < 0) return ret; } + mutex_unlock(&mantis->i2c_lock); return num; } @@ -160,6 +162,7 @@ int __devinit mantis_i2c_init(struct mantis_pci *mantis) { u32 intstat, intmask; + mutex_init(&mantis->i2c_lock); memcpy(&mantis->adapter, &mantis_i2c_adapter, sizeof (mantis_i2c_adapter)); i2c_set_adapdata(&mantis->adapter, mantis); mantis->i2c_rc = i2c_add_adapter(&mantis->adapter); From 1fa1f107852484157c5453cc6c4a60c792f06c35 Mon Sep 17 00:00:00 2001 From: Sigmund Augdal Date: Thu, 3 Dec 2009 05:44:00 -0300 Subject: [PATCH 1035/1626] V4L/DVB (13713): [MB86A16] Fix: Initialize SNR/STATUS Signed-off-by: Sigmund Augdal Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a16.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c index 361e47623467..4f8ef2e2ecd1 100644 --- a/drivers/media/dvb/frontends/mb86a16.c +++ b/drivers/media/dvb/frontends/mb86a16.c @@ -595,6 +595,7 @@ static int mb86a16_read_status(struct dvb_frontend *fe, fe_status_t *status) { struct mb86a16_state *state = fe->demodulator_priv; + *status = 0; if (state->signal & 0x02) *status |= FE_HAS_VITERBI; if (state->signal & 0x01) @@ -1693,6 +1694,7 @@ static int mb86a16_read_snr(struct dvb_frontend *fe, u16 *snr) int low_tide = 2, high_tide = 30, q_level; u8 cn; + *snr = 0; if (mb86a16_read(state, 0x26, &cn) != 2) { dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); return -EREMOTEIO; From 33c79630dd9fb7658dbb885a22e3a8127b16a38a Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Thu, 3 Dec 2009 05:44:38 -0300 Subject: [PATCH 1036/1626] V4L/DVB (13714): [MB86A16] FIX/Code simplification: use hwconfig->ts_size instead of ts_size thanks to Marko Ristola for pointing it out Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_common.h | 1 - drivers/media/dvb/mantis/mantis_dma.c | 4 ++-- drivers/media/dvb/mantis/mantis_dvb.c | 1 - 3 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index e354e7678a57..d4865e4f3468 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -92,7 +92,6 @@ struct mantis_pci { u8 revision; unsigned int num; - u16 ts_size; /* RISC Core */ u32 finished_block; diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c index e207870fb45d..ea23a89c03fe 100644 --- a/drivers/media/dvb/mantis/mantis_dma.c +++ b/drivers/media/dvb/mantis/mantis_dma.c @@ -190,7 +190,6 @@ void mantis_dma_start(struct mantis_pci *mantis) mantis_risc_program(mantis); mmwrite(cpu_to_le32(mantis->risc_dma), MANTIS_RISC_START); -// mmwrite(MANTIS_GPIF_RDWRN, MANTIS_GPIF_ADDR); mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_RDWRN, MANTIS_GPIF_ADDR); mmwrite(0, MANTIS_DMA_CTL); @@ -227,12 +226,13 @@ void mantis_dma_stop(struct mantis_pci *mantis) void mantis_dma_xfer(unsigned long data) { struct mantis_pci *mantis = (struct mantis_pci *) data; + struct mantis_hwconfig *config = mantis->hwconfig; while (mantis->last_block != mantis->finished_block) { dprintk(verbose, MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]", mantis->last_block, mantis->finished_block); - (mantis->ts_size ? dvb_dmx_swfilter_204: dvb_dmx_swfilter) + (config->ts_size ? dvb_dmx_swfilter_204: dvb_dmx_swfilter) (&mantis->demux, &mantis->buf_cpu[mantis->last_block * MANTIS_BLOCK_BYTES], MANTIS_BLOCK_BYTES); mantis->last_block = (mantis->last_block + 1) % MANTIS_BLOCK_COUNT; } diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index 319bb8bef4e1..7fe8541b1c51 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -142,7 +142,6 @@ int __devinit mantis_dvb_init(struct mantis_pci *mantis) mantis->demux.start_feed = mantis_dvb_start_feed; mantis->demux.stop_feed = mantis_dvb_stop_feed; mantis->demux.write_to_decoder = NULL; - mantis->ts_size = 1; //188 dprintk(verbose, MANTIS_DEBUG, 1, "dvb_dmx_init"); if ((result = dvb_dmx_init(&mantis->demux)) < 0) { dprintk(verbose, MANTIS_ERROR, 1, From 8154bad4c488c1a23fb504a6e751d71a39733b76 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Thu, 3 Dec 2009 05:46:06 -0300 Subject: [PATCH 1037/1626] V4L/DVB (13715): [Mantis] Kernel I2C changes: use PCI parent device Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_common.h | 2 +- drivers/media/dvb/mantis/mantis_i2c.c | 10 +++++++--- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index d4865e4f3468..34d2389f312b 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -83,7 +83,7 @@ struct mantis_pci { u8 latency; - struct pci_dev *pdev; + struct pci_dev *pdev; unsigned long mantis_addr; volatile void __iomem *mantis_mmio; diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c index 39fabe572c2e..005df1e90a16 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.c +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -161,11 +161,15 @@ static struct i2c_adapter mantis_i2c_adapter = { int __devinit mantis_i2c_init(struct mantis_pci *mantis) { u32 intstat, intmask; + struct i2c_adapter *i2c_adapter = &mantis->adapter; + struct pci_dev *pdev = mantis->pdev; mutex_init(&mantis->i2c_lock); - memcpy(&mantis->adapter, &mantis_i2c_adapter, sizeof (mantis_i2c_adapter)); - i2c_set_adapdata(&mantis->adapter, mantis); - mantis->i2c_rc = i2c_add_adapter(&mantis->adapter); + memcpy(i2c_adapter, &mantis_i2c_adapter, sizeof (mantis_i2c_adapter)); + i2c_set_adapdata(i2c_adapter, mantis); + + i2c_adapter->dev.parent = &pdev->dev; + mantis->i2c_rc = i2c_add_adapter(i2c_adapter); if (mantis->i2c_rc < 0) return mantis->i2c_rc; From 417036844823313901d7f7d7b963f215cc3b0641 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 3 Dec 2009 05:47:11 -0300 Subject: [PATCH 1038/1626] V4L/DVB (13716): [Mantis] Bug: incorrect byte swap You know, the worst endianness errors are not the cases where people forget to byte-swap, but the cases where they either byte-swap with the wrong size, or byte-swap when they shouldn't have done so at all. Those ones defeat the casual reader of the code. Signed-off-by: David Woodhouse Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c index ea23a89c03fe..f685992f7d0a 100644 --- a/drivers/media/dvb/mantis/mantis_dma.c +++ b/drivers/media/dvb/mantis/mantis_dma.c @@ -189,7 +189,7 @@ void mantis_dma_start(struct mantis_pci *mantis) dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Start DMA engine"); mantis_risc_program(mantis); - mmwrite(cpu_to_le32(mantis->risc_dma), MANTIS_RISC_START); + mmwrite(mantis->risc_dma, MANTIS_RISC_START); mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_RDWRN, MANTIS_GPIF_ADDR); mmwrite(0, MANTIS_DMA_CTL); From 77557abef0de3f1f1e8f563db6df8710a9e930fe Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Thu, 3 Dec 2009 05:48:13 -0300 Subject: [PATCH 1039/1626] V4L/DVB (13717): [MB86A16] Statistics Updates * Demodulator status check made reliable * Code simplification for Viterbi Sync check, makes acquisition more reliable * Implement a BER monitor * Implement a Signal strength monitor * Implement a "simple" UCB monitor, no real UCB monitor Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a16.c | 142 +++++++++++++++++++++----- 1 file changed, 117 insertions(+), 25 deletions(-) diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c index 4f8ef2e2ecd1..eddb35baaf00 100644 --- a/drivers/media/dvb/frontends/mb86a16.c +++ b/drivers/media/dvb/frontends/mb86a16.c @@ -36,7 +36,6 @@ struct mb86a16_state { struct i2c_adapter *i2c_adap; const struct mb86a16_config *config; struct dvb_frontend frontend; - u8 signal; // tuning parameters int frequency; @@ -593,17 +592,39 @@ err: static int mb86a16_read_status(struct dvb_frontend *fe, fe_status_t *status) { + u8 stat, stat2; struct mb86a16_state *state = fe->demodulator_priv; *status = 0; - if (state->signal & 0x02) - *status |= FE_HAS_VITERBI; - if (state->signal & 0x01) + + if (mb86a16_read(state, MB86A16_SIG1, &stat) != 2) + goto err; + if (mb86a16_read(state, MB86A16_SIG2, &stat2) != 2) + goto err; + if ((stat > 25) && (stat2 > 25)) + *status |= FE_HAS_SIGNAL; + if ((stat > 45) && (stat2 > 45)) + *status |= FE_HAS_CARRIER; + + if (mb86a16_read(state, MB86A16_STATUS, &stat) != 2) + goto err; + + if (stat & 0x01) *status |= FE_HAS_SYNC; - if (state->signal & 0x03) + if (stat & 0x01) + *status |= FE_HAS_VITERBI; + + if (mb86a16_read(state, MB86A16_FRAMESYNC, &stat) != 2) + goto err; + + if ((stat & 0x0f) && (*status & FE_HAS_VITERBI)) *status |= FE_HAS_LOCK; return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; } static int sync_chk(struct mb86a16_state *state, @@ -1439,10 +1460,6 @@ static int mb86a16_set_fe(struct mb86a16_state *state) msleep_interruptible(wait_t); sync = sync_chk(state, &VIRM); dprintk(verbose, MB86A16_INFO, 1, "-------- Viterbi=[%d] SYNC=[%d] ---------", VIRM, sync); - if (mb86a16_read(state, 0x0d, &state->signal) != 2) { - dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); - return -EREMOTEIO; - } if (VIRM) { if (VIRM == 4) { // 5/6 if (SIG1 > 110) @@ -1459,22 +1476,14 @@ static int mb86a16_set_fe(struct mb86a16_state *state) iq_vt_set(state, 1); FEC_srst(state); } - if (SIG1 > 110) - wait_t = ( 786432 + state->srate / 2) / state->srate; - else - wait_t = (1572864 + state->srate / 2) / state->srate; - - msleep_interruptible(wait_t); - SEQ_set(state, 1); - } else { // 1/2, 2/3, 3/4, 7/8 - if (SIG1 > 110) - wait_t = ( 786432 + state->srate / 2) / state->srate; - else - wait_t = (1572864 + state->srate / 2) / state->srate; - - msleep_interruptible(wait_t); - SEQ_set(state, 1); } + // 1/2, 2/3, 3/4, 7/8 + if (SIG1 > 110) + wait_t = ( 786432 + state->srate / 2) / state->srate; + else + wait_t = (1572864 + state->srate / 2) / state->srate; + msleep_interruptible(wait_t); + SEQ_set(state, 1); } else { dprintk(verbose, MB86A16_INFO, 1, "NO -- SYNC"); SEQ_set(state, 1); @@ -1648,12 +1657,85 @@ static int mb86a16_sleep(struct dvb_frontend *fe) static int mb86a16_read_ber(struct dvb_frontend *fe, u32 *ber) { + u8 ber_mon, ber_tab, ber_lsb, ber_mid, ber_msb, ber_tim, ber_rst; + u32 timer; + + struct mb86a16_state *state = fe->demodulator_priv; + + *ber = 0; + if (mb86a16_read(state, MB86A16_BERMON, &ber_mon) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERTAB, &ber_tab) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERLSB, &ber_lsb) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERMID, &ber_mid) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERMSB, &ber_msb) != 2) + goto err; + /* BER monitor invalid when BER_EN = 0 */ + if (ber_mon & 0x04) { + /* coarse, fast calculation */ + *ber = ber_tab & 0x1f; + dprintk(verbose, MB86A16_DEBUG, 1, "BER coarse=[0x%02x]", *ber); + if (ber_mon & 0x01) { + /* + * BER_SEL = 1, The monitored BER is the estimated + * value with a Reed-Solomon decoder error amount at + * the deinterleaver output. + * monitored BER is expressed as a 20 bit output in total + */ + ber_rst = ber_mon >> 3; + *ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb; + if (ber_rst == 0) + timer = 12500000; + if (ber_rst == 1) + timer = 25000000; + if (ber_rst == 2) + timer = 50000000; + if (ber_rst == 3) + timer = 100000000; + + *ber /= timer; + dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber); + } else { + /* + * BER_SEL = 0, The monitored BER is the estimated + * value with a Viterbi decoder error amount at the + * QPSK demodulator output. + * monitored BER is expressed as a 24 bit output in total + */ + ber_tim = ber_mon >> 1; + *ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb; + if (ber_tim == 0) + timer = 16; + if (ber_tim == 1) + timer = 24; + + *ber /= 2 ^ timer; + dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber); + } + } return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; } static int mb86a16_read_signal_strength(struct dvb_frontend *fe, u16 *strength) { + u8 agcm = 0; + struct mb86a16_state *state = fe->demodulator_priv; + *strength = 0; + if (mb86a16_read(state, MB86A16_AGCM, &agcm) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + *strength = ((0xff - agcm) * 100) / 256; + dprintk(verbose, MB86A16_DEBUG, 1, "Signal strength=[%d %%]", (u8) *strength); + *strength = (0xffff - 0xff) + agcm; return 0; } @@ -1708,12 +1790,22 @@ static int mb86a16_read_snr(struct dvb_frontend *fe, u16 *snr) } q_level = (*snr * 100) / (high_tide - low_tide); dprintk(verbose, MB86A16_ERROR, 1, "SNR (Quality) = [%d dB], Level=%d %%", *snr, q_level); + *snr = (0xffff - 0xff) + *snr; return 0; } static int mb86a16_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) { + u8 dist; + struct mb86a16_state *state = fe->demodulator_priv; + + if (mb86a16_read(state, MB86A16_DISTMON, &dist) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + *ucblocks = dist; + return 0; } @@ -1723,7 +1815,7 @@ static struct dvb_frontend_ops mb86a16_ops = { .type = FE_QPSK, .frequency_min = 950000, .frequency_max = 2150000, - .frequency_stepsize = 125, + .frequency_stepsize = 3000, .frequency_tolerance = 0, .symbol_rate_min = 1000000, .symbol_rate_max = 45000000, From f8e26cdec5ac25ae8d73e278e21033292de5430b Mon Sep 17 00:00:00 2001 From: Marko Ristola Date: Fri, 4 Dec 2009 04:35:35 -0300 Subject: [PATCH 1040/1626] V4L/DVB (13718): [Mantis] Use gpio_set_bits to turn OFF the bits as well Signed-off-by: Marko Ristola Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_core.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c index d159ad6fc321..16d693eeb29e 100644 --- a/drivers/media/dvb/mantis/mantis_core.c +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -172,25 +172,23 @@ int mantis_core_exit(struct mantis_pci *mantis) return 0; } +// Turn the given bit on or off. void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value) { - u32 reg; + u32 currVal, newVal; + + currVal = mmread(MANTIS_GPIF_ADDR); if (value) - reg = 0x0000; + newVal = currVal | (1 << bitpos); else - reg = 0xffff; + newVal = currVal & (~(1 << bitpos)); - reg = (value << bitpos); - - mmwrite(mmread(MANTIS_GPIF_ADDR) | reg, MANTIS_GPIF_ADDR); + mmwrite(newVal, MANTIS_GPIF_ADDR); mmwrite(0x00, MANTIS_GPIF_DOUT); udelay(100); - mmwrite(mmread(MANTIS_GPIF_ADDR) | reg, MANTIS_GPIF_ADDR); - mmwrite(0x00, MANTIS_GPIF_DOUT); } - //direction = 0 , no CI passthrough ; 1 , CI passthrough void mantis_set_direction(struct mantis_pci *mantis, int direction) { From 2687d832fe0141015e2391f3755d9499e6efb83e Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 04:39:14 -0300 Subject: [PATCH 1041/1626] V4L/DVB (13719): [Mantis/VP-2033] Initial test switch to the tda10021, from the cu1216 Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_dvb.c | 2 +- drivers/media/dvb/mantis/mantis_vp2033.c | 80 +++++++++++++++++------- drivers/media/dvb/mantis/mantis_vp2033.h | 8 +-- 3 files changed, 63 insertions(+), 27 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index 7fe8541b1c51..f2556950d18b 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -239,7 +239,7 @@ int __devinit mantis_frontend_init(struct mantis_pci *mantis) break; case MANTIS_VP_2033_DVB_C: // VP-2033 dprintk(verbose, MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); - mantis->fe = cu1216_attach(&philips_cu1216_config, &mantis->adapter); + mantis->fe = tda10021_attach(&philips_cu1216_config, &mantis->adapter, read_pwm(mantis)); if (mantis->fe) { mantis->fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set; dprintk(verbose, MANTIS_ERROR, 1, diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c index 15772fe58280..4664d2959218 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.c +++ b/drivers/media/dvb/mantis/mantis_vp2033.c @@ -27,44 +27,80 @@ struct mantis_hwconfig vp2033_mantis_config = { .model_name = MANTIS_MODEL_NAME, .dev_type = MANTIS_DEV_TYPE, - .ts_size = MANTIS_TS_188, + .ts_size = MANTIS_TS_204, }; -struct cu1216_config philips_cu1216_config = { - .demod_address = 0x18 >> 1, - .pll_set = philips_cu1216_tuner_set, -// .fe_reset = mantis_fe_reset, +struct tda1002x_config philips_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, }; -int philips_cu1216_tuner_set(struct dvb_frontend *fe, - struct dvb_frontend_parameters *params) +u8 read_pwm(struct mantis_pci *mantis) +{ + u8 b = 0xff; + u8 pwm; + struct i2c_msg msg[] = { + {.addr = 0x50,.flags = 0,.buf = &b,.len = 1}, + {.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} + }; + + if ((i2c_transfer(&mantis->adapter, msg, 2) != 2) + || (pwm == 0xff)) + pwm = 0x48; + + return pwm; +} + +int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { struct mantis_pci *mantis = fe->dvb->priv; - u8 buf[4]; - - struct i2c_msg msg = { - .addr = 0xc0 >> 1, - .flags = 0, - .buf = buf, - .len = sizeof (buf) - }; + u8 buf[6]; + struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) }; + int i; +#define CU1216_IF 36125000 #define TUNER_MUL 62500 - u32 div = (params->frequency + 36125000 + TUNER_MUL / 2) / TUNER_MUL; + u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL; buf[0] = (div >> 8) & 0x7f; buf[1] = div & 0xff; - buf[2] = 0x86; - buf[3] = (params->frequency < 150000000 ? 0xA1 : - params->frequency < 445000000 ? 0x92 : 0x34); + buf[2] = 0xce; + buf[3] = (params->frequency < 150000000 ? 0x01 : + params->frequency < 445000000 ? 0x02 : 0x04); + buf[4] = 0xde; + buf[5] = 0x20; - if (i2c_transfer(&mantis->adapter, &msg, 1) < 0) { - printk("%s tuner not ack!\n", __FUNCTION__); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(&mantis->adapter, &msg, 1) != 1) return -EIO; + + /* wait for the pll lock */ + msg.flags = I2C_M_RD; + msg.len = 1; + for (i = 0; i < 20; i++) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(&mantis->adapter, &msg, 1) == 1 && (buf[0] & 0x40)) + break; + + msleep(10); } - msleep(100); + + /* switch the charge pump to the lower current */ + msg.flags = 0; + msg.len = 2; + msg.buf = &buf[2]; + buf[2] &= ~0x40; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(&mantis->adapter, &msg, 1) != 1) + return -EIO; return 0; } diff --git a/drivers/media/dvb/mantis/mantis_vp2033.h b/drivers/media/dvb/mantis/mantis_vp2033.h index 513c491942cb..fcf8b85be941 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.h +++ b/drivers/media/dvb/mantis/mantis_vp2033.h @@ -23,15 +23,15 @@ #include "dvb_frontend.h" #include "mantis_common.h" -#include "cu1216.h" +#include "tda1002x.h" #define MANTIS_VP_2033_DVB_C 0x0008 -extern struct cu1216_config philips_cu1216_config; +extern struct tda1002x_config philips_cu1216_config; extern struct mantis_hwconfig vp2033_mantis_config; -extern int philips_cu1216_tuner_set(struct dvb_frontend *fe, - struct dvb_frontend_parameters *params); +extern int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params); +extern u8 read_pwm(struct mantis_pci *mantis); #endif // __MANTIS_VP2033_H From 51d20db8bb9c5a14ac2320664289f13bd52625c6 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 04:39:48 -0300 Subject: [PATCH 1042/1626] V4L/DVB (13720): [Mantis/Terratec Cinergy C] Add support for the Terratec Cinergy C PCI Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_core.c | 1 + drivers/media/dvb/mantis/mantis_dvb.c | 13 +++++++++++++ drivers/media/dvb/mantis/mantis_vp2033.h | 1 + 3 files changed, 15 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c index 16d693eeb29e..3b5fea7d8d50 100644 --- a/drivers/media/dvb/mantis/mantis_core.c +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -111,6 +111,7 @@ static void mantis_load_config(struct mantis_pci *mantis) mantis->hwconfig = &vp1034_mantis_config; break; case MANTIS_VP_2033_DVB_C: // VP-2033 + case TERRATEC_CINERGY_C_PCI: // Terratec Cinergy C PCI mantis->hwconfig = &vp2033_mantis_config; break; case MANTIS_VP_3030_DVB_T: // VP-3030 diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index f2556950d18b..e2aec0c7f024 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -251,6 +251,19 @@ int __devinit mantis_frontend_init(struct mantis_pci *mantis) } break; + case TERRATEC_CINERGY_C_PCI: + dprintk(verbose, MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); + mantis->fe = tda10023_attach(&philips_cu1216_config, &mantis->adapter, read_pwm(mantis)); + if (mantis->fe) { + mantis->fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set; + dprintk(verbose, MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend 0x%02x", + philips_cu1216_config.demod_address); + + dprintk(verbose, MANTIS_ERROR, 1, + "Mantis DVB-C Philips CU1216 frontend attach success"); + } + break; default: dprintk(verbose, MANTIS_DEBUG, 1, "Unknown frontend:[0x%02x]", mantis->sub_device_id); diff --git a/drivers/media/dvb/mantis/mantis_vp2033.h b/drivers/media/dvb/mantis/mantis_vp2033.h index fcf8b85be941..0a753f7f742d 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.h +++ b/drivers/media/dvb/mantis/mantis_vp2033.h @@ -26,6 +26,7 @@ #include "tda1002x.h" #define MANTIS_VP_2033_DVB_C 0x0008 +#define TERRATEC_CINERGY_C_PCI 0x1178 extern struct tda1002x_config philips_cu1216_config; extern struct mantis_hwconfig vp2033_mantis_config; From 99d96e4e9202aa046e3e2be1813ff59c84e67608 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 04:40:16 -0300 Subject: [PATCH 1043/1626] V4L/DVB (13721): [Mantis] Bug! Before bailing out, Unlock Thanks to hotwings for pointing out the bug Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_i2c.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c index 005df1e90a16..45d9e6bd9628 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.c +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -133,11 +133,15 @@ static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, in ret = mantis_i2c_write(mantis, &msgs[i]); if (ret < 0) - return ret; + goto bail_out; } mutex_unlock(&mantis->i2c_lock); return num; + +bail_out: + mutex_unlock(&mantis->i2c_lock); + return ret; } static u32 mantis_i2c_func(struct i2c_adapter *adapter) From 5e68b0aedaa34447d86ae5cc6d071251c62bef37 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 04:40:50 -0300 Subject: [PATCH 1044/1626] V4L/DVB (13722): [Mantis] Revert 13560 Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_core.c | 1 - drivers/media/dvb/mantis/mantis_dvb.c | 13 ------------- drivers/media/dvb/mantis/mantis_vp2033.h | 1 - 3 files changed, 15 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c index 3b5fea7d8d50..16d693eeb29e 100644 --- a/drivers/media/dvb/mantis/mantis_core.c +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -111,7 +111,6 @@ static void mantis_load_config(struct mantis_pci *mantis) mantis->hwconfig = &vp1034_mantis_config; break; case MANTIS_VP_2033_DVB_C: // VP-2033 - case TERRATEC_CINERGY_C_PCI: // Terratec Cinergy C PCI mantis->hwconfig = &vp2033_mantis_config; break; case MANTIS_VP_3030_DVB_T: // VP-3030 diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index e2aec0c7f024..f2556950d18b 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -251,19 +251,6 @@ int __devinit mantis_frontend_init(struct mantis_pci *mantis) } break; - case TERRATEC_CINERGY_C_PCI: - dprintk(verbose, MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); - mantis->fe = tda10023_attach(&philips_cu1216_config, &mantis->adapter, read_pwm(mantis)); - if (mantis->fe) { - mantis->fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set; - dprintk(verbose, MANTIS_ERROR, 1, - "found Philips CU1216 DVB-C frontend 0x%02x", - philips_cu1216_config.demod_address); - - dprintk(verbose, MANTIS_ERROR, 1, - "Mantis DVB-C Philips CU1216 frontend attach success"); - } - break; default: dprintk(verbose, MANTIS_DEBUG, 1, "Unknown frontend:[0x%02x]", mantis->sub_device_id); diff --git a/drivers/media/dvb/mantis/mantis_vp2033.h b/drivers/media/dvb/mantis/mantis_vp2033.h index 0a753f7f742d..fcf8b85be941 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.h +++ b/drivers/media/dvb/mantis/mantis_vp2033.h @@ -26,7 +26,6 @@ #include "tda1002x.h" #define MANTIS_VP_2033_DVB_C 0x0008 -#define TERRATEC_CINERGY_C_PCI 0x1178 extern struct tda1002x_config philips_cu1216_config; extern struct mantis_hwconfig vp2033_mantis_config; From b2eb1312faa26703e71b7b3945c8773213e9ee49 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 04:42:22 -0300 Subject: [PATCH 1045/1626] V4L/DVB (13723): [Mantis/VP-2040, Terratec Cinergy C] Add support for the Cinergy C, VP-2040 clone Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/Makefile | 13 +++++++-- drivers/media/dvb/mantis/mantis_core.c | 4 +++ drivers/media/dvb/mantis/mantis_dvb.c | 16 ++++++++++- drivers/media/dvb/mantis/mantis_vp2040.c | 36 ++++++++++++++++++++++++ drivers/media/dvb/mantis/mantis_vp2040.h | 33 ++++++++++++++++++++++ 5 files changed, 98 insertions(+), 4 deletions(-) create mode 100644 drivers/media/dvb/mantis/mantis_vp2040.c create mode 100644 drivers/media/dvb/mantis/mantis_vp2040.h diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile index a980ff2382b7..2be21bfdd248 100644 --- a/drivers/media/dvb/mantis/Makefile +++ b/drivers/media/dvb/mantis/Makefile @@ -1,6 +1,13 @@ -mantis-objs = mantis_core.o mantis_dma.o mantis_pci.o mantis_i2c.o \ - mantis_dvb.o mantis_vp1033.o mantis_vp1034.o mantis_vp2033.o \ - mantis_vp3030.o +mantis-objs = mantis_core.o \ + mantis_dma.o \ + mantis_pci.o \ + mantis_i2c.o \ + mantis_dvb.o \ + mantis_vp1033.o \ + mantis_vp1034.o \ + mantis_vp2033.o \ + mantis_vp2040.o \ + mantis_vp3030.o obj-$(CONFIG_DVB_MANTIS) += mantis.o diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c index 16d693eeb29e..96b939247b48 100644 --- a/drivers/media/dvb/mantis/mantis_core.c +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -23,6 +23,7 @@ #include "mantis_vp1033.h" #include "mantis_vp1034.h" #include "mantis_vp2033.h" +#include "mantis_vp2040.h" #include "mantis_vp3030.h" static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) @@ -113,6 +114,9 @@ static void mantis_load_config(struct mantis_pci *mantis) case MANTIS_VP_2033_DVB_C: // VP-2033 mantis->hwconfig = &vp2033_mantis_config; break; + case TERRATEC_CINERGY_C_PCI: // VP-2040 clone + mantis->hwconfig = &vp2040_mantis_config; + break; case MANTIS_VP_3030_DVB_T: // VP-3030 mantis->hwconfig = &vp3030_mantis_config; break; diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index f2556950d18b..15012ea5796a 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -28,6 +28,7 @@ #include "mantis_vp1033.h" #include "mantis_vp1034.h" #include "mantis_vp2033.h" +#include "mantis_vp2040.h" #include "mantis_vp3030.h" /* Tuner power supply control */ @@ -243,7 +244,7 @@ int __devinit mantis_frontend_init(struct mantis_pci *mantis) if (mantis->fe) { mantis->fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set; dprintk(verbose, MANTIS_ERROR, 1, - "found Philips CU1216 DVB-C frontend @ 0x%02x", + "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", philips_cu1216_config.demod_address); dprintk(verbose, MANTIS_ERROR, 1, @@ -251,6 +252,19 @@ int __devinit mantis_frontend_init(struct mantis_pci *mantis) } break; + case TERRATEC_CINERGY_C_PCI: + dprintk(verbose, MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); + mantis->fe = tda10023_attach(&tda10023_cu1216_config, &mantis->adapter, read_pwm(mantis)); + if (mantis->fe) { + mantis->fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set; + dprintk(verbose, MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + philips_cu1216_config.demod_address); + + dprintk(verbose, MANTIS_ERROR, 1, + "Mantis DVB-C Philips CU1216 frontend attach success"); + } + break; default: dprintk(verbose, MANTIS_DEBUG, 1, "Unknown frontend:[0x%02x]", mantis->sub_device_id); diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c new file mode 100644 index 000000000000..07da73827fd2 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp2040.c @@ -0,0 +1,36 @@ +/* + Mantis VP-2040 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_vp2040.h" + +#define MANTIS_MODEL_NAME "VP-2040" +#define MANTIS_DEV_TYPE "DVB-C" + +struct mantis_hwconfig vp2040_mantis_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, +}; + +struct tda1002x_config tda10023_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp2040.h b/drivers/media/dvb/mantis/mantis_vp2040.h new file mode 100644 index 000000000000..825ccbb87ad3 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp2040.h @@ -0,0 +1,33 @@ +/* + Mantis VP-2040 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP2040_H +#define __MANTIS_VP2040_H + +#include "dvb_frontend.h" +#include "mantis_common.h" +#include "tda1002x.h" + +#define TERRATEC_CINERGY_C_PCI 0x1178 + +extern struct tda1002x_config tda10023_cu1216_config; +extern struct mantis_hwconfig vp2040_mantis_config; + +#endif //__MANTIS_VP2040_H From 873c8c25ebca50bd60e21784c4d442c4fecb8658 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 04:43:04 -0300 Subject: [PATCH 1046/1626] V4L/DVB (13724): [Mantis/VP-1041] Initial support for Mantis VP-1041 Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/Makefile | 1 + drivers/media/dvb/mantis/mantis_core.c | 4 + drivers/media/dvb/mantis/mantis_dvb.c | 18 ++ drivers/media/dvb/mantis/mantis_vp1041.c | 295 +++++++++++++++++++++++ drivers/media/dvb/mantis/mantis_vp1041.h | 36 +++ 5 files changed, 354 insertions(+) create mode 100644 drivers/media/dvb/mantis/mantis_vp1041.c create mode 100644 drivers/media/dvb/mantis/mantis_vp1041.h diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile index 2be21bfdd248..bdf3e3629ab3 100644 --- a/drivers/media/dvb/mantis/Makefile +++ b/drivers/media/dvb/mantis/Makefile @@ -5,6 +5,7 @@ mantis-objs = mantis_core.o \ mantis_dvb.o \ mantis_vp1033.o \ mantis_vp1034.o \ + mantis_vp1041.o \ mantis_vp2033.o \ mantis_vp2040.o \ mantis_vp3030.o diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c index 96b939247b48..47cfb759f0bd 100644 --- a/drivers/media/dvb/mantis/mantis_core.c +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -22,6 +22,7 @@ #include "mantis_core.h" #include "mantis_vp1033.h" #include "mantis_vp1034.h" +#include "mantis_vp1041.h" #include "mantis_vp2033.h" #include "mantis_vp2040.h" #include "mantis_vp3030.h" @@ -111,6 +112,9 @@ static void mantis_load_config(struct mantis_pci *mantis) case MANTIS_VP_1034_DVB_S: // VP-1034 mantis->hwconfig = &vp1034_mantis_config; break; + case MANTIS_VP_1041_DVB_S2: // VP-1041 + mantis->hwconfig = &vp1041_mantis_config; + break; case MANTIS_VP_2033_DVB_C: // VP-2033 mantis->hwconfig = &vp2033_mantis_config; break; diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index 15012ea5796a..a4750bb22b02 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -27,6 +27,7 @@ #include "dvb_frontend.h" #include "mantis_vp1033.h" #include "mantis_vp1034.h" +#include "mantis_vp1041.h" #include "mantis_vp2033.h" #include "mantis_vp2040.h" #include "mantis_vp3030.h" @@ -238,6 +239,23 @@ int __devinit mantis_frontend_init(struct mantis_pci *mantis) } break; + case MANTIS_VP_1041_DVB_S2: + mantis->fe = stb0899_attach(&vp1041_config, &mantis->adapter); + if (mantis->fe) { + dprintk(verbose, MANTIS_ERROR, 1, + "found STB0899 DVB-S/DVB-S2 frontend @0x%02x", + vp1041_config.demod_address); + + if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, &mantis->adapter)) { + if (!lnbp21_attach(mantis->fe, &mantis->adapter, 0, 0)) { + printk("%s: No LNBP21 found!\n", __FUNCTION__); + mantis->fe = NULL; + } + } else { + mantis->fe = NULL; + } + } + break; case MANTIS_VP_2033_DVB_C: // VP-2033 dprintk(verbose, MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); mantis->fe = tda10021_attach(&philips_cu1216_config, &mantis->adapter, read_pwm(mantis)); diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c new file mode 100644 index 000000000000..a3279f0e4b92 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1041.c @@ -0,0 +1,295 @@ +/* + Mantis VP-1041 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_vp1041.h" +#include "stb0899_reg.h" +#include "stb0899_cfg.h" +#include "stb6100_cfg.h" + +#define MANTIS_MODEL_NAME "VP-1041" +#define MANTIS_DEV_TYPE "DSS/DVB-S/DVB-S2" + +struct mantis_hwconfig vp1041_mantis_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, +}; + +static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = { + +// 0x0000000b , /* SYSREG */ + { STB0899_DEV_ID , 0x30 }, + { STB0899_DISCNTRL1 , 0x32 }, + { STB0899_DISCNTRL2 , 0x80 }, + { STB0899_DISRX_ST0 , 0x04 }, + { STB0899_DISRX_ST1 , 0x00 }, + { STB0899_DISPARITY , 0x00 }, + { STB0899_DISFIFO , 0x00 }, + { STB0899_DISSTATUS , 0x20 }, + { STB0899_DISF22 , 0x99 }, + { STB0899_DISF22RX , 0xa8 }, + //SYSREG ? + { STB0899_ACRPRESC , 0x11 }, + { STB0899_ACRDIV1 , 0x0a }, + { STB0899_ACRDIV2 , 0x05 }, + { STB0899_DACR1 , 0x00 }, + { STB0899_DACR2 , 0x00 }, + { STB0899_OUTCFG , 0x00 }, + { STB0899_MODECFG , 0x00 }, + { STB0899_IRQSTATUS_3 , 0xfe }, + { STB0899_IRQSTATUS_2 , 0x03 }, + { STB0899_IRQSTATUS_1 , 0x7c }, + { STB0899_IRQSTATUS_0 , 0xf4 }, + { STB0899_IRQMSK_3 , 0xf3 }, + { STB0899_IRQMSK_2 , 0xfc }, + { STB0899_IRQMSK_1 , 0xff }, + { STB0899_IRQMSK_0 , 0xff }, + { STB0899_IRQCFG , 0x00 }, + { STB0899_I2CCFG , 0x88 }, + { STB0899_I2CRPT , 0x5c }, + { STB0899_IOPVALUE5 , 0x00 }, + { STB0899_IOPVALUE4 , 0x33 }, + { STB0899_IOPVALUE3 , 0x6d }, + { STB0899_IOPVALUE2 , 0x90 }, + { STB0899_IOPVALUE1 , 0x60 }, + { STB0899_IOPVALUE0 , 0x00 }, + { STB0899_GPIO00CFG , 0x82 }, + { STB0899_GPIO01CFG , 0x82 }, + { STB0899_GPIO02CFG , 0x82 }, + { STB0899_GPIO03CFG , 0x82 }, + { STB0899_GPIO04CFG , 0x82 }, + { STB0899_GPIO05CFG , 0x82 }, + { STB0899_GPIO06CFG , 0x82 }, + { STB0899_GPIO07CFG , 0x82 }, + { STB0899_GPIO08CFG , 0x82 }, + { STB0899_GPIO09CFG , 0x82 }, + { STB0899_GPIO10CFG , 0x82 }, + { STB0899_GPIO11CFG , 0x82 }, + { STB0899_GPIO12CFG , 0x82 }, + { STB0899_GPIO13CFG , 0x82 }, + { STB0899_GPIO14CFG , 0x82 }, + { STB0899_GPIO15CFG , 0x82 }, + { STB0899_GPIO16CFG , 0x82 }, + { STB0899_GPIO17CFG , 0x82 }, + { STB0899_GPIO18CFG , 0x82 }, + { STB0899_GPIO19CFG , 0x82 }, + { STB0899_GPIO20CFG , 0x82 }, + { STB0899_SDATCFG , 0xb8 }, + { STB0899_SCLTCFG , 0xba }, + { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */ + { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ + { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ + { STB0899_DIRCLKCFG , 0x82 }, + { STB0899_CLKOUT27CFG , 0x7e }, + { STB0899_STDBYCFG , 0x82 }, + { STB0899_CS0CFG , 0x82 }, + { STB0899_CS1CFG , 0x82 }, + { STB0899_DISEQCOCFG , 0x20 }, + { STB0899_GPIO32CFG , 0x82 }, + { STB0899_GPIO33CFG , 0x82 }, + { STB0899_GPIO34CFG , 0x82 }, + { STB0899_GPIO35CFG , 0x82 }, + { STB0899_GPIO36CFG , 0x82 }, + { STB0899_GPIO37CFG , 0x82 }, + { STB0899_GPIO38CFG , 0x82 }, + { STB0899_GPIO39CFG , 0x82 }, + { STB0899_NCOARSE , 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ + { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ + { STB0899_FILTCTRL , 0x00 }, + { STB0899_SYSCTRL , 0x01 }, + { STB0899_STOPCLK1 , 0x20 }, + { STB0899_STOPCLK2 , 0x00 }, + { STB0899_INTBUFSTATUS , 0x00 }, + { STB0899_INTBUFCTRL , 0x0a }, + { 0xffff , 0xff }, +}; + +static const struct stb0899_s1_reg vp1041_stb0899_s1_init_3[] = { + { STB0899_DEMOD , 0x00 }, + { STB0899_RCOMPC , 0xc9 }, + { STB0899_AGC1CN , 0x41 }, + { STB0899_AGC1REF , 0x10 }, + { STB0899_RTC , 0x7a }, + { STB0899_TMGCFG , 0x4e }, + { STB0899_AGC2REF , 0x34 }, + { STB0899_TLSR , 0x84 }, + { STB0899_CFD , 0xc7 }, + { STB0899_ACLC , 0x87 }, + { STB0899_BCLC , 0x94 }, + { STB0899_EQON , 0x41 }, + { STB0899_LDT , 0xdd }, + { STB0899_LDT2 , 0xc9 }, + { STB0899_EQUALREF , 0xb4 }, + { STB0899_TMGRAMP , 0x10 }, + { STB0899_TMGTHD , 0x30 }, + { STB0899_IDCCOMP , 0xfb }, + { STB0899_QDCCOMP , 0x03 }, + { STB0899_POWERI , 0x3b }, + { STB0899_POWERQ , 0x3d }, + { STB0899_RCOMP , 0x81 }, + { STB0899_AGCIQIN , 0x80 }, + { STB0899_AGC2I1 , 0x04 }, + { STB0899_AGC2I2 , 0xf5 }, + { STB0899_TLIR , 0x25 }, + { STB0899_RTF , 0x80 }, + { STB0899_DSTATUS , 0x00 }, + { STB0899_LDI , 0xca }, + { STB0899_CFRM , 0xf1 }, + { STB0899_CFRL , 0xf3 }, + { STB0899_NIRM , 0x2a }, + { STB0899_NIRL , 0x05 }, + { STB0899_ISYMB , 0x17 }, + { STB0899_QSYMB , 0xfa }, + { STB0899_SFRH , 0x2f }, + { STB0899_SFRM , 0x68 }, + { STB0899_SFRL , 0x40 }, + { STB0899_SFRUPH , 0x2f }, + { STB0899_SFRUPM , 0x68 }, + { STB0899_SFRUPL , 0x40 }, + { STB0899_EQUAI1 , 0xfd }, + { STB0899_EQUAQ1 , 0x04 }, + { STB0899_EQUAI2 , 0x0f }, + { STB0899_EQUAQ2 , 0xff }, + { STB0899_EQUAI3 , 0xdf }, + { STB0899_EQUAQ3 , 0xfa }, + { STB0899_EQUAI4 , 0x37 }, + { STB0899_EQUAQ4 , 0x0d }, + { STB0899_EQUAI5 , 0xbd }, + { STB0899_EQUAQ5 , 0xf7 }, + { STB0899_DSTATUS2 , 0x00 }, + { STB0899_VSTATUS , 0x00 }, + { STB0899_VERROR , 0xff }, + { STB0899_IQSWAP , 0x2a }, + { STB0899_ECNT1M , 0x00 }, + { STB0899_ECNT1L , 0x00 }, + { STB0899_ECNT2M , 0x00 }, + { STB0899_ECNT2L , 0x00 }, + { STB0899_ECNT3M , 0x00 }, + { STB0899_ECNT3L , 0x00 }, + { STB0899_FECAUTO1 , 0x06 }, + { STB0899_FECM , 0x01 }, + { STB0899_VTH12 , 0xf0 }, + { STB0899_VTH23 , 0xa0 }, + { STB0899_VTH34 , 0x78 }, + { STB0899_VTH56 , 0x4e }, + { STB0899_VTH67 , 0x48 }, + { STB0899_VTH78 , 0x38 }, + { STB0899_PRVIT , 0xff }, + { STB0899_VITSYNC , 0x19 }, + { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ + { STB0899_TSULC , 0x42 }, + { STB0899_RSLLC , 0x40 }, + { STB0899_TSLPL , 0x12 }, + { STB0899_TSCFGH , 0x0c }, + { STB0899_TSCFGM , 0x00 }, + { STB0899_TSCFGL , 0x0c }, + { STB0899_TSOUT , 0x0d }, /* 0x0d for CAM */ + { STB0899_RSSYNCDEL , 0x00 }, + { STB0899_TSINHDELH , 0x02 }, + { STB0899_TSINHDELM , 0x00 }, + { STB0899_TSINHDELL , 0x00 }, + { STB0899_TSLLSTKM , 0x00 }, + { STB0899_TSLLSTKL , 0x00 }, + { STB0899_TSULSTKM , 0x00 }, + { STB0899_TSULSTKL , 0xab }, + { STB0899_PCKLENUL , 0x00 }, + { STB0899_PCKLENLL , 0xcc }, + { STB0899_RSPCKLEN , 0xcc }, + { STB0899_TSSTATUS , 0x80 }, + { STB0899_ERRCTRL1 , 0xb6 }, + { STB0899_ERRCTRL2 , 0x96 }, + { STB0899_ERRCTRL3 , 0x89 }, + { STB0899_DMONMSK1 , 0x27 }, + { STB0899_DMONMSK0 , 0x03 }, + { STB0899_DEMAPVIT , 0x5c }, + { STB0899_PLPARM , 0x1f }, + { STB0899_PDELCTRL , 0x48 }, + { STB0899_PDELCTRL2 , 0x00 }, + { STB0899_BBHCTRL1 , 0x00 }, + { STB0899_BBHCTRL2 , 0x00 }, + { STB0899_HYSTTHRESH , 0x77 }, + { STB0899_MATCSTM , 0x00 }, + { STB0899_MATCSTL , 0x00 }, + { STB0899_UPLCSTM , 0x00 }, + { STB0899_UPLCSTL , 0x00 }, + { STB0899_DFLCSTM , 0x00 }, + { STB0899_DFLCSTL , 0x00 }, + { STB0899_SYNCCST , 0x00 }, + { STB0899_SYNCDCSTM , 0x00 }, + { STB0899_SYNCDCSTL , 0x00 }, + { STB0899_ISI_ENTRY , 0x00 }, + { STB0899_ISI_BIT_EN , 0x00 }, + { STB0899_MATSTRM , 0x00 }, + { STB0899_MATSTRL , 0x00 }, + { STB0899_UPLSTRM , 0x00 }, + { STB0899_UPLSTRL , 0x00 }, + { STB0899_DFLSTRM , 0x00 }, + { STB0899_DFLSTRL , 0x00 }, + { STB0899_SYNCSTR , 0x00 }, + { STB0899_SYNCDSTRM , 0x00 }, + { STB0899_SYNCDSTRL , 0x00 }, + { STB0899_CFGPDELSTATUS1 , 0x10 }, + { STB0899_CFGPDELSTATUS2 , 0x00 }, + { STB0899_BBFERRORM , 0x00 }, + { STB0899_BBFERRORL , 0x00 }, + { STB0899_UPKTERRORM , 0x00 }, + { STB0899_UPKTERRORL , 0x00 }, + { 0xffff , 0xff }, +}; + +struct stb0899_config vp1041_config = { + .init_dev = vp1041_stb0899_s1_init_1, + .init_s2_demod = stb0899_s2_init_2, + .init_s1_demod = vp1041_stb0899_s1_init_3, + .init_s2_fec = stb0899_s2_init_4, + .init_tst = stb0899_s1_init_5, + + .demod_address = 0x68, /* 0xd0 >> 1 */ + + .xtal_freq = 27000000, + .inversion = IQ_SWAP_ON, /* 1 */ + + .esno_ave = STB0899_DVBS2_ESNO_AVE, + .esno_quant = STB0899_DVBS2_ESNO_QUANT, + .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, + .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, + .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, + .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, + .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, + .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, + .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, + + .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, + .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, + .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, + .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, + + .tuner_get_frequency = stb6100_get_frequency, + .tuner_set_frequency = stb6100_set_frequency, + .tuner_set_bandwidth = stb6100_set_bandwidth, + .tuner_get_bandwidth = stb6100_get_bandwidth, + .tuner_set_rfsiggain = NULL, +}; + +struct stb6100_config vp1041_stb6100_config = { + .tuner_address = 0x60, + .refclock = 27000000, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp1041.h b/drivers/media/dvb/mantis/mantis_vp1041.h new file mode 100644 index 000000000000..53f4cb188572 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1041.h @@ -0,0 +1,36 @@ +/* + Mantis VP-1041 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP1041_H +#define __MANTIS_VP1041_H + +#include "dvb_frontend.h" +#include "mantis_common.h" +#include "stb0899_drv.h" +#include "stb6100.h" +#include "lnbp21.h" + +#define MANTIS_VP_1041_DVB_S2 0x0031 + +extern struct mantis_hwconfig vp1041_mantis_config; +extern struct stb0899_config vp1041_config; +extern struct stb6100_config vp1041_stb6100_config; + +#endif // __MANTIS_VP1041_H From 0131258ba7a5f776627da953b4cef775568026ea Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 04:44:55 -0300 Subject: [PATCH 1047/1626] V4L/DVB (13725): [Mantis/VP-1041] Revert to old register initialization parameters, for now. Thanks to eso46 for pointing it out Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_vp1041.c | 126 +++++++++++------------ 1 file changed, 63 insertions(+), 63 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c index a3279f0e4b92..8854ef390e09 100644 --- a/drivers/media/dvb/mantis/mantis_vp1041.c +++ b/drivers/media/dvb/mantis/mantis_vp1041.c @@ -125,102 +125,102 @@ static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = { static const struct stb0899_s1_reg vp1041_stb0899_s1_init_3[] = { { STB0899_DEMOD , 0x00 }, { STB0899_RCOMPC , 0xc9 }, - { STB0899_AGC1CN , 0x41 }, + { STB0899_AGC1CN , 0x01 }, { STB0899_AGC1REF , 0x10 }, - { STB0899_RTC , 0x7a }, + { STB0899_RTC , 0x23 }, { STB0899_TMGCFG , 0x4e }, { STB0899_AGC2REF , 0x34 }, { STB0899_TLSR , 0x84 }, - { STB0899_CFD , 0xc7 }, + { STB0899_CFD , 0xf7 }, { STB0899_ACLC , 0x87 }, { STB0899_BCLC , 0x94 }, { STB0899_EQON , 0x41 }, - { STB0899_LDT , 0xdd }, - { STB0899_LDT2 , 0xc9 }, + { STB0899_LDT , 0xf1 }, + { STB0899_LDT2 , 0xe3 }, { STB0899_EQUALREF , 0xb4 }, { STB0899_TMGRAMP , 0x10 }, { STB0899_TMGTHD , 0x30 }, - { STB0899_IDCCOMP , 0xfb }, - { STB0899_QDCCOMP , 0x03 }, - { STB0899_POWERI , 0x3b }, - { STB0899_POWERQ , 0x3d }, - { STB0899_RCOMP , 0x81 }, + { STB0899_IDCCOMP , 0xfd }, + { STB0899_QDCCOMP , 0xff }, + { STB0899_POWERI , 0x0c }, + { STB0899_POWERQ , 0x0f }, + { STB0899_RCOMP , 0x6c }, { STB0899_AGCIQIN , 0x80 }, - { STB0899_AGC2I1 , 0x04 }, - { STB0899_AGC2I2 , 0xf5 }, - { STB0899_TLIR , 0x25 }, - { STB0899_RTF , 0x80 }, + { STB0899_AGC2I1 , 0x06 }, + { STB0899_AGC2I2 , 0x00 }, + { STB0899_TLIR , 0x30 }, + { STB0899_RTF , 0x7f }, { STB0899_DSTATUS , 0x00 }, - { STB0899_LDI , 0xca }, - { STB0899_CFRM , 0xf1 }, - { STB0899_CFRL , 0xf3 }, - { STB0899_NIRM , 0x2a }, - { STB0899_NIRL , 0x05 }, - { STB0899_ISYMB , 0x17 }, - { STB0899_QSYMB , 0xfa }, + { STB0899_LDI , 0xbc }, + { STB0899_CFRM , 0xea }, + { STB0899_CFRL , 0x31 }, + { STB0899_NIRM , 0x2b }, + { STB0899_NIRL , 0x80 }, + { STB0899_ISYMB , 0x1d }, + { STB0899_QSYMB , 0xa6 }, { STB0899_SFRH , 0x2f }, { STB0899_SFRM , 0x68 }, { STB0899_SFRL , 0x40 }, { STB0899_SFRUPH , 0x2f }, { STB0899_SFRUPM , 0x68 }, { STB0899_SFRUPL , 0x40 }, - { STB0899_EQUAI1 , 0xfd }, - { STB0899_EQUAQ1 , 0x04 }, - { STB0899_EQUAI2 , 0x0f }, - { STB0899_EQUAQ2 , 0xff }, - { STB0899_EQUAI3 , 0xdf }, - { STB0899_EQUAQ3 , 0xfa }, - { STB0899_EQUAI4 , 0x37 }, - { STB0899_EQUAQ4 , 0x0d }, - { STB0899_EQUAI5 , 0xbd }, - { STB0899_EQUAQ5 , 0xf7 }, + { STB0899_EQUAI1 , 0x02 }, + { STB0899_EQUAQ1 , 0xff }, + { STB0899_EQUAI2 , 0x04 }, + { STB0899_EQUAQ2 , 0x05 }, + { STB0899_EQUAI3 , 0x02 }, + { STB0899_EQUAQ3 , 0xfd }, + { STB0899_EQUAI4 , 0x03 }, + { STB0899_EQUAQ4 , 0x07 }, + { STB0899_EQUAI5 , 0x08 }, + { STB0899_EQUAQ5 , 0xf5 }, { STB0899_DSTATUS2 , 0x00 }, { STB0899_VSTATUS , 0x00 }, - { STB0899_VERROR , 0xff }, + { STB0899_VERROR , 0x86 }, { STB0899_IQSWAP , 0x2a }, { STB0899_ECNT1M , 0x00 }, { STB0899_ECNT1L , 0x00 }, { STB0899_ECNT2M , 0x00 }, { STB0899_ECNT2L , 0x00 }, - { STB0899_ECNT3M , 0x00 }, - { STB0899_ECNT3L , 0x00 }, + { STB0899_ECNT3M , 0x0a }, + { STB0899_ECNT3L , 0xad }, { STB0899_FECAUTO1 , 0x06 }, { STB0899_FECM , 0x01 }, - { STB0899_VTH12 , 0xf0 }, - { STB0899_VTH23 , 0xa0 }, - { STB0899_VTH34 , 0x78 }, - { STB0899_VTH56 , 0x4e }, - { STB0899_VTH67 , 0x48 }, - { STB0899_VTH78 , 0x38 }, + { STB0899_VTH12 , 0xb0 }, + { STB0899_VTH23 , 0x7a }, + { STB0899_VTH34 , 0x58 }, + { STB0899_VTH56 , 0x38 }, + { STB0899_VTH67 , 0x34 }, + { STB0899_VTH78 , 0x24 }, { STB0899_PRVIT , 0xff }, { STB0899_VITSYNC , 0x19 }, { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ { STB0899_TSULC , 0x42 }, - { STB0899_RSLLC , 0x40 }, + { STB0899_RSLLC , 0x41 }, { STB0899_TSLPL , 0x12 }, { STB0899_TSCFGH , 0x0c }, { STB0899_TSCFGM , 0x00 }, - { STB0899_TSCFGL , 0x0c }, - { STB0899_TSOUT , 0x0d }, /* 0x0d for CAM */ + { STB0899_TSCFGL , 0x00 }, + { STB0899_TSOUT , 0x69 }, /* 0x0d for CAM */ { STB0899_RSSYNCDEL , 0x00 }, { STB0899_TSINHDELH , 0x02 }, { STB0899_TSINHDELM , 0x00 }, { STB0899_TSINHDELL , 0x00 }, - { STB0899_TSLLSTKM , 0x00 }, - { STB0899_TSLLSTKL , 0x00 }, + { STB0899_TSLLSTKM , 0x1b }, + { STB0899_TSLLSTKL , 0xb3 }, { STB0899_TSULSTKM , 0x00 }, - { STB0899_TSULSTKL , 0xab }, - { STB0899_PCKLENUL , 0x00 }, + { STB0899_TSULSTKL , 0x00 }, + { STB0899_PCKLENUL , 0xbc }, { STB0899_PCKLENLL , 0xcc }, - { STB0899_RSPCKLEN , 0xcc }, - { STB0899_TSSTATUS , 0x80 }, + { STB0899_RSPCKLEN , 0xbd }, + { STB0899_TSSTATUS , 0x90 }, { STB0899_ERRCTRL1 , 0xb6 }, - { STB0899_ERRCTRL2 , 0x96 }, - { STB0899_ERRCTRL3 , 0x89 }, + { STB0899_ERRCTRL2 , 0x95 }, + { STB0899_ERRCTRL3 , 0x8d }, { STB0899_DMONMSK1 , 0x27 }, { STB0899_DMONMSK0 , 0x03 }, { STB0899_DEMAPVIT , 0x5c }, - { STB0899_PLPARM , 0x1f }, + { STB0899_PLPARM , 0x19 }, { STB0899_PDELCTRL , 0x48 }, { STB0899_PDELCTRL2 , 0x00 }, { STB0899_BBHCTRL1 , 0x00 }, @@ -237,19 +237,19 @@ static const struct stb0899_s1_reg vp1041_stb0899_s1_init_3[] = { { STB0899_SYNCDCSTL , 0x00 }, { STB0899_ISI_ENTRY , 0x00 }, { STB0899_ISI_BIT_EN , 0x00 }, - { STB0899_MATSTRM , 0x00 }, - { STB0899_MATSTRL , 0x00 }, - { STB0899_UPLSTRM , 0x00 }, - { STB0899_UPLSTRL , 0x00 }, - { STB0899_DFLSTRM , 0x00 }, + { STB0899_MATSTRM , 0xf0 }, + { STB0899_MATSTRL , 0x02 }, + { STB0899_UPLSTRM , 0x45 }, + { STB0899_UPLSTRL , 0x60 }, + { STB0899_DFLSTRM , 0xe3 }, { STB0899_DFLSTRL , 0x00 }, - { STB0899_SYNCSTR , 0x00 }, - { STB0899_SYNCDSTRM , 0x00 }, - { STB0899_SYNCDSTRL , 0x00 }, - { STB0899_CFGPDELSTATUS1 , 0x10 }, - { STB0899_CFGPDELSTATUS2 , 0x00 }, + { STB0899_SYNCSTR , 0x47 }, + { STB0899_SYNCDSTRM , 0x05 }, + { STB0899_SYNCDSTRL , 0x18 }, + { STB0899_CFGPDELSTATUS1 , 0x19 }, + { STB0899_CFGPDELSTATUS2 , 0x2b }, { STB0899_BBFERRORM , 0x00 }, - { STB0899_BBFERRORL , 0x00 }, + { STB0899_BBFERRORL , 0x01 }, { STB0899_UPKTERRORM , 0x00 }, { STB0899_UPKTERRORL , 0x00 }, { 0xffff , 0xff }, From 35afca912ffb8ea5a060ff53a59266ccaa769c98 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 04:47:30 -0300 Subject: [PATCH 1048/1626] V4L/DVB (13726): [Mantis/Skystar HD2] Add support for the Technisat Skystar HD2 Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_core.c | 1 + drivers/media/dvb/mantis/mantis_dvb.c | 1 + drivers/media/dvb/mantis/mantis_vp1041.h | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c index 47cfb759f0bd..a164bb143631 100644 --- a/drivers/media/dvb/mantis/mantis_core.c +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -113,6 +113,7 @@ static void mantis_load_config(struct mantis_pci *mantis) mantis->hwconfig = &vp1034_mantis_config; break; case MANTIS_VP_1041_DVB_S2: // VP-1041 + case TECHNISAT_SKYSTAR_HD2: mantis->hwconfig = &vp1041_mantis_config; break; case MANTIS_VP_2033_DVB_C: // VP-2033 diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index a4750bb22b02..9634b972a0f9 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -240,6 +240,7 @@ int __devinit mantis_frontend_init(struct mantis_pci *mantis) } break; case MANTIS_VP_1041_DVB_S2: + case TECHNISAT_SKYSTAR_HD2: mantis->fe = stb0899_attach(&vp1041_config, &mantis->adapter); if (mantis->fe) { dprintk(verbose, MANTIS_ERROR, 1, diff --git a/drivers/media/dvb/mantis/mantis_vp1041.h b/drivers/media/dvb/mantis/mantis_vp1041.h index 53f4cb188572..2cc83a6e5996 100644 --- a/drivers/media/dvb/mantis/mantis_vp1041.h +++ b/drivers/media/dvb/mantis/mantis_vp1041.h @@ -28,6 +28,7 @@ #include "lnbp21.h" #define MANTIS_VP_1041_DVB_S2 0x0031 +#define TECHNISAT_SKYSTAR_HD2 0x0001 extern struct mantis_hwconfig vp1041_mantis_config; extern struct stb0899_config vp1041_config; From 1159531a93f04346d94f72fdb4719c3f7e7d0a8c Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 04:48:03 -0300 Subject: [PATCH 1049/1626] V4L/DVB (13727): [Mantis/VP-1041] Bugfix: Sigh! Don't look for the STOP bit Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_vp1041.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c index 8854ef390e09..7dee1af0d649 100644 --- a/drivers/media/dvb/mantis/mantis_vp1041.c +++ b/drivers/media/dvb/mantis/mantis_vp1041.c @@ -64,7 +64,7 @@ static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = { { STB0899_IRQMSK_0 , 0xff }, { STB0899_IRQCFG , 0x00 }, { STB0899_I2CCFG , 0x88 }, - { STB0899_I2CRPT , 0x5c }, + { STB0899_I2CRPT , 0x58 }, { STB0899_IOPVALUE5 , 0x00 }, { STB0899_IOPVALUE4 , 0x33 }, { STB0899_IOPVALUE3 , 0x6d }, From 9ce39460837202920fb9bad88eeec13fc75e7a13 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 04:52:23 -0300 Subject: [PATCH 1050/1626] V4L/DVB (13728): [Mantis] Add in some Host Interface definitions Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_hif.h | 9 +++++++++ 1 file changed, 9 insertions(+) create mode 100644 drivers/media/dvb/mantis/mantis_hif.h diff --git a/drivers/media/dvb/mantis/mantis_hif.h b/drivers/media/dvb/mantis/mantis_hif.h new file mode 100644 index 000000000000..33b4f2b0ef67 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_hif.h @@ -0,0 +1,9 @@ +#ifndef __MANTIS_HIF_H +#define __MANTIS_HIF_H + +#define MANTIS_HIF_MEMRD 1 +#define MANTIS_HIF_MEMWR 2 +#define MANTIS_HIF_IOMRD 3 +#define MANTIS_HIF_IOMWR 4 + +#endif // __MANTIS_HIF_H From 23fc1b2b00e849f6ec8628da77e2f282aedbebf3 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 04:53:07 -0300 Subject: [PATCH 1051/1626] V4L/DVB (13729): [Mantis] Add in a license header Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_hif.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_hif.h b/drivers/media/dvb/mantis/mantis_hif.h index 33b4f2b0ef67..7ef45cec19d6 100644 --- a/drivers/media/dvb/mantis/mantis_hif.h +++ b/drivers/media/dvb/mantis/mantis_hif.h @@ -1,3 +1,23 @@ +/* + Mantis PCI bridge driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + #ifndef __MANTIS_HIF_H #define __MANTIS_HIF_H From cb428c3fe9667eb7521769f25f65b9dbf52a33ca Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 04:59:05 -0300 Subject: [PATCH 1052/1626] V4L/DVB (13730): [Mantis] Add in some UART definitions Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_uart.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 drivers/media/dvb/mantis/mantis_uart.h diff --git a/drivers/media/dvb/mantis/mantis_uart.h b/drivers/media/dvb/mantis/mantis_uart.h new file mode 100644 index 000000000000..6c9a17c3bfb5 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_uart.h @@ -0,0 +1,18 @@ +#ifndef __MANTIS_UART_H +#define __MANTIS_UART_H + +enum mantis_baud { + MANTIS_BAUD_9600 = 0, + MANTIS_BAUD_19200, + MANTIS_BAUD_38400, + MANTIS_BAUD_57600, + MANTIS_BAUD_115200 +}; + +enum mantis_parity { + MANTIS_PARITY_NONE = 0, + MANTIS_PARITY_EVEN, + MANTIS_PARITY_ODD +}; + +#endif // __MANTIS_UART_H From d4f4ae046d2a9cd6b7ddb39e336a73ed92b63fe8 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 04:59:44 -0300 Subject: [PATCH 1053/1626] V4L/DVB (13731): [Mantis] Add in a license header Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_uart.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_uart.h b/drivers/media/dvb/mantis/mantis_uart.h index 6c9a17c3bfb5..61138639c366 100644 --- a/drivers/media/dvb/mantis/mantis_uart.h +++ b/drivers/media/dvb/mantis/mantis_uart.h @@ -1,3 +1,23 @@ +/* + Mantis PCI bridge driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + #ifndef __MANTIS_UART_H #define __MANTIS_UART_H From dd827da1e7d6ecf81883af68731cf0f1c2393c6d Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:00:30 -0300 Subject: [PATCH 1054/1626] V4L/DVB (13732): [Mantis] Add in some Link Layer definitions Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_link.h | 51 ++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 drivers/media/dvb/mantis/mantis_link.h diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h new file mode 100644 index 000000000000..2849457c4270 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_link.h @@ -0,0 +1,51 @@ +/* + Mantis PCI bridge driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_LINK_H +#define __MANTIS_LINK_H + +enum mantis_sbuf_status { + MANTIS_SBUF_DATA_AVAIL = 1, + MANTIS_SBUF_DATA_EMPTY = 2, + MANTIS_SBUF_DATA_OVFLW = 3 +}; + +struct mantis_slot { + u32 timeout; +}; + +struct mantis_ca { + struct mantis_slot slot; + + struct tasklet_struct hif_evm_tasklet; + + u32 hif_event; + wait_queue_head_t hif_opdone_wq; + wait_queue_head_t hif_brrdyw_wq; + wait_queue_head_t hif_data_wq; + u32 hif_job_queue + + enum mantis_sbuf_status sbuf_status; + + struct dvb_device *ca_dev; + void *ca_priv; +}; + +#endif // __MANTIS_LINK_H From bc4ed42fdf762a2049b255de92626ad1cfd86d8e Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:03:35 -0300 Subject: [PATCH 1055/1626] V4L/DVB (13733): [Mantis] Start with the PCMCIA interface Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/Makefile | 17 ++++++------ drivers/media/dvb/mantis/mantis_common.h | 4 +++ drivers/media/dvb/mantis/mantis_link.h | 2 +- drivers/media/dvb/mantis/mantis_pcmcia.c | 34 ++++++++++++++++++++++++ 4 files changed, 48 insertions(+), 9 deletions(-) create mode 100644 drivers/media/dvb/mantis/mantis_pcmcia.c diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile index bdf3e3629ab3..fa9e806400e0 100644 --- a/drivers/media/dvb/mantis/Makefile +++ b/drivers/media/dvb/mantis/Makefile @@ -1,11 +1,12 @@ -mantis-objs = mantis_core.o \ - mantis_dma.o \ - mantis_pci.o \ - mantis_i2c.o \ - mantis_dvb.o \ - mantis_vp1033.o \ - mantis_vp1034.o \ - mantis_vp1041.o \ +mantis-objs = mantis_core.o \ + mantis_dma.o \ + mantis_pci.o \ + mantis_i2c.o \ + mantis_dvb.o \ + mantis_pcmcia.o \ + mantis_vp1033.o \ + mantis_vp1034.o \ + mantis_vp1041.o \ mantis_vp2033.o \ mantis_vp2040.o \ mantis_vp3030.o diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index 34d2389f312b..24fc6da07fe2 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -35,6 +35,8 @@ #include #include "mantis_reg.h" +#include "mantis_link.h" + #define MANTIS_ERROR 0 #define MANTIS_NOTICE 1 #define MANTIS_INFO 2 @@ -134,6 +136,8 @@ struct mantis_pci { /* A12 A13 A14 */ int gpio_status; + + struct mantis_ca *mantis_ca; }; extern unsigned int verbose; diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h index 2849457c4270..2d9b64f6937a 100644 --- a/drivers/media/dvb/mantis/mantis_link.h +++ b/drivers/media/dvb/mantis/mantis_link.h @@ -40,7 +40,7 @@ struct mantis_ca { wait_queue_head_t hif_opdone_wq; wait_queue_head_t hif_brrdyw_wq; wait_queue_head_t hif_data_wq; - u32 hif_job_queue + u32 hif_job_queue; enum mantis_sbuf_status sbuf_status; diff --git a/drivers/media/dvb/mantis/mantis_pcmcia.c b/drivers/media/dvb/mantis/mantis_pcmcia.c new file mode 100644 index 000000000000..63f9621a90b7 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_pcmcia.c @@ -0,0 +1,34 @@ +/* + Mantis PCI bridge driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" + +int mantis_pcmcia_init(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + return 0; +} + +void mantis_pcmcia_exit(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + +} From d575571e8eda92c2cfd727ef050d17e30878fee6 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:04:18 -0300 Subject: [PATCH 1056/1626] V4L/DVB (13734): [Mantis] Initial go at an Event Manager Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/Makefile | 1 + drivers/media/dvb/mantis/mantis_common.h | 2 ++ drivers/media/dvb/mantis/mantis_evm.c | 37 ++++++++++++++++++++++++ 3 files changed, 40 insertions(+) create mode 100644 drivers/media/dvb/mantis/mantis_evm.c diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile index fa9e806400e0..38d0e6dbafe3 100644 --- a/drivers/media/dvb/mantis/Makefile +++ b/drivers/media/dvb/mantis/Makefile @@ -3,6 +3,7 @@ mantis-objs = mantis_core.o \ mantis_pci.o \ mantis_i2c.o \ mantis_dvb.o \ + mantis_evm.o \ mantis_pcmcia.o \ mantis_vp1033.o \ mantis_vp1034.o \ diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index 24fc6da07fe2..f9891ebcfb0d 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -77,6 +77,8 @@ struct mantis_hwconfig { }; struct mantis_pci { + unsigned int verbose; + /* PCI stuff */ u16 vendor_id; u16 device_id; diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c new file mode 100644 index 000000000000..c9359d6ddc23 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -0,0 +1,37 @@ +/* + Mantis PCI bridge driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_link.h" + +int mantis_evmgr_init(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager"); + return 0; +} + +void mantis_evmgr_exit(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting"); +} From fadfa070d30434dd228362c933827eb6ce137f2d Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:05:19 -0300 Subject: [PATCH 1057/1626] V4L/DVB (13735): [Mantis] Implement the Event Manager tasklet Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_evm.c | 65 +++++++++++++++++++++++++++ drivers/media/dvb/mantis/mantis_reg.h | 60 ++++++++++++++++++++++++- 2 files changed, 123 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index c9359d6ddc23..9f1740ea389c 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -20,12 +20,76 @@ #include "mantis_common.h" #include "mantis_link.h" +#include "mantis_hif.h" + +void mantis_hifevm_tasklet(unsigned long data) +{ + struct mantis_ca *ca = (struct mantis_ca *) data; + struct mantis_pci *mantis = ca->ca_priv; + + u32 gpif_stat; + + gpif_stat = mmread(MANTIS_GPIF_STATUS); + + if (gpif_stat & MANTIS_GPIF_DETSTAT) { + if (gpif_stat & MANTIS_CARD_PLUGIN) { + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num); + mmwrite(0xdada0000, MANTIS_CARD_RESET); + // Plugin call here + gpif_stat = 0; // crude ! + } + } else { + if (gpif_stat & MANTIS_CARD_PLUGOUT) { + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num); + mmwrite(0xdada0000, MANTIS_CARD_RESET); + // Unplug call here + gpif_stat = 0; // crude ! + } + } + + if (gpif_stat & MANTIS_GPIF_EXTIRQ) + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num); + + if (gpif_stat & MANTIS_SBUF_WSTO) + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num); + + if (gpif_stat & MANTIS_GPIF_OTHERR) + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num); + + if (gpif_stat & MANTIS_SBUF_OVFLW) + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num); + + if (gpif_stat & MANTIS_GPIF_BRRDY) { + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num); + ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL; + if (ca->hif_job_queue & MANTIS_HIF_MEMRD) + wake_up(&ca->hif_brrdyw_wq); + } + if (gpif_stat & MANTIS_GPIF_WRACK) + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Slave Write ACK", mantis->num); + + if (gpif_stat & MANTIS_GPIF_INTSTAT) + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num); + + if (gpif_stat & MANTIS_SBUF_EMPTY) + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num); + + if (gpif_stat & MANTIS_SBUF_OPDONE) { + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num); + if (ca->hif_job_queue) { + wake_up(&ca->hif_opdone_wq); + ca->hif_event = MANTIS_SBUF_OPDONE; + } + } +} int mantis_evmgr_init(struct mantis_ca *ca) { struct mantis_pci *mantis = ca->ca_priv; dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager"); + tasklet_init(&ca->hif_evm_tasklet, mantis_hifevm_tasklet, (unsigned long) ca); + return 0; } @@ -34,4 +98,5 @@ void mantis_evmgr_exit(struct mantis_ca *ca) struct mantis_pci *mantis = ca->ca_priv; dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting"); + tasklet_kill(&ca->hif_evm_tasklet); } diff --git a/drivers/media/dvb/mantis/mantis_reg.h b/drivers/media/dvb/mantis/mantis_reg.h index 1b54e09fd862..d9862b7dbf03 100644 --- a/drivers/media/dvb/mantis/mantis_reg.h +++ b/drivers/media/dvb/mantis/mantis_reg.h @@ -73,6 +73,40 @@ #define MANTIS_I2C_STOP (0x01 << 5) #define MANTIS_I2C_PGMODE (0x01 << 3) +#define MANTIS_GPIF_CFGSLA 0x84 +#define MANTIS_GPIF_WAITSMPL (0x07 << 28) +#define MANTIS_GPIF_BYTEADDRSUB (0x01 << 25) +#define MANTIS_GPIF_WAITPOL (0x01 << 24) +#define MANTIS_GPIF_NCDELAY (0x07 << 20) +#define MANTIS_GPIF_RW2CSDELAY (0x07 << 16) +#define MANTIS_GPIF_SLFTIMEDMODE (0x01 << 15) +#define MANTIS_GPIF_SLFTIMEDDELY (0x7f << 8) +#define MANTIS_GPIF_DEVTYPE (0x07 << 4) +#define MANTIS_GPIF_BIGENDIAN (0x01 << 3) +#define MANTIS_GPIF_FETCHCMD (0x03 << 1) +#define MANTIS_GPIF_HWORDDEV (0x01 << 0) + +#define MANTIS_GPIF_WSTOPER 0x90 +#define MANTIS_GPIF_WSTOPERWREN3 (0x01 << 31) +#define MANTIS_GPIF_PARBOOTN (0x01 << 29) +#define MANTIS_GPIF_WSTOPERSLID3 (0x1f << 24) +#define MANTIS_GPIF_WSTOPERWREN2 (0x01 << 23) +#define MANTIS_GPIF_WSTOPERSLID2 (0x1f << 16) +#define MANTIS_GPIF_WSTOPERWREN1 (0x01 << 15) +#define MANTIS_GPIF_WSTOPERSLID1 (0x1f << 8) +#define MANTIS_GPIF_WSTOPERWREN0 (0x01 << 7) +#define MANTIS_GPIF_WSTOPERSLID0 (0x1f << 0) + +#define MANTIS_GPIF_CS2RW 0x94 +#define MANTIS_GPIF_CS2RWWREN3 (0x01 << 31) +#define MANTIS_GPIF_CS2RWDELY3 (0x3f << 24) +#define MANTIS_GPIF_CS2RWWREN2 (0x01 << 23) +#define MANTIS_GPIF_CS2RWDELY2 (0x3f << 16) +#define MANTIS_GPIF_CS2RWWREN1 (0x01 << 15) +#define MANTIS_GPIF_CS2RWDELY1 (0x3f << 8) +#define MANTIS_GPIF_CS2RWWREN0 (0x01 << 7) +#define MANTIS_GPIF_CS2RWDELY0 (0x3f << 0) + #define MANTIS_GPIF_IRQCFG 0x98 #define MANTIS_GPIF_IRQPOL (0x01 << 8) #define MANTIS_MASK_WRACK (0x01 << 7) @@ -99,11 +133,33 @@ #define MANTIS_CARD_PLUGIN (0x01 << 1) #define MANTIS_CARD_PLUGOUT (0x01 << 0) +#define MANTIS_GPIF_BRADDR 0xa0 +#define MANTIS_GPIF_PCMCIAREG (0x01 << 27) +#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26) +#define MANTIS_GPIF_BR_ADDR (0xfffffff << 0) + +#define MANTIS_GPIF_BRBYTES 0xa4 +#define MANTIS_GPIF_BRCNT (0xfff << 0) + +#define MANTIS_PCMCIA_RESET 0xa8 +#define MANTIS_PCMCIA_RSTVAL (0xff << 0) + +#define MANTIS_CARD_RESET 0xac + #define MANTIS_GPIF_ADDR 0xb0 -#define MANTIS_GPIF_RDWRN (0x01 << 31) +#define MANTIS_GPIF_RDWRN (0x01 << 31) +#define MANTIS_GPIF_PCMCIAREG (0x01 << 27) +#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26) +#define MANTIS_GPIF_HIF_ADDR (0xfffffff << 0) #define MANTIS_GPIF_DOUT 0xb4 -#define MANTIS_GPIF_DIN 0xb8 +#define MANTIS_GPIF_HIF_DOUT (0xfffffff << 0) +#define MANTIS_GPIF_DIN 0xb8 +#define MANTIS_GPIF_HIF_DIN (0xfffffff << 0) + +#define MANTIS_GPIF_SPARE 0xbc +#define MANTIS_GPIF_LOGICRD (0xffff << 16) +#define MANTIS_GPIF_LOGICRW (0xffff << 0) #endif //__MANTIS_REG_H From 8ce571f5e7eb7186f676af3b60af7980c2fc7929 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:06:00 -0300 Subject: [PATCH 1058/1626] V4L/DVB (13736): [Mantis] Implement CAM Plug IN and Unplug events Sigh! how i wish things were simpler ... Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_link.h | 8 +++ drivers/media/dvb/mantis/mantis_pcmcia.c | 66 ++++++++++++++++++++++++ 2 files changed, 74 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h index 2d9b64f6937a..c6b32229edde 100644 --- a/drivers/media/dvb/mantis/mantis_link.h +++ b/drivers/media/dvb/mantis/mantis_link.h @@ -31,6 +31,12 @@ struct mantis_slot { u32 timeout; }; +/* Physical layer */ +enum mantis_slot_state { + MODULE_INSERTED = 3, + MODULE_XTRACTED = 4 +}; + struct mantis_ca { struct mantis_slot slot; @@ -44,6 +50,8 @@ struct mantis_ca { enum mantis_sbuf_status sbuf_status; + enum mantis_slot_state slot_state; + struct dvb_device *ca_dev; void *ca_priv; }; diff --git a/drivers/media/dvb/mantis/mantis_pcmcia.c b/drivers/media/dvb/mantis/mantis_pcmcia.c index 63f9621a90b7..960123f1ed44 100644 --- a/drivers/media/dvb/mantis/mantis_pcmcia.c +++ b/drivers/media/dvb/mantis/mantis_pcmcia.c @@ -19,11 +19,75 @@ */ #include "mantis_common.h" +#include "mantis_link.h" /* temporary due to physical layer stuff */ + +/* + * If Slot state is already PLUG_IN event and we are called + * again, definitely it is jitter alone + */ +void mantis_event_cam_plugin(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + u32 gpif_irqcfg; + + if (ca->slot_state == MODULE_XTRACTED) { + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num); + udelay(50); + mmwrite(0xda000000, MANTIS_CARD_RESET); + gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG); + gpif_irqcfg |= MANTIS_MASK_PLUGOUT; + gpif_irqcfg &= ~MANTIS_MASK_PLUGIN; + mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG); + udelay(500); + ca->slot_state = MODULE_INSERTED; + } + udelay(100); +} + +/* + * If Slot state is already UN_PLUG event and we are called + * again, definitely it is jitter alone + */ +void mantis_event_cam_unplug(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + u32 gpif_irqcfg; + + if (ca->slot_state == MODULE_INSERTED) { + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num); + udelay(50); + mmwrite(0x00da0000, MANTIS_CARD_RESET); + gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG); + gpif_irqcfg |= MANTIS_MASK_PLUGIN; + gpif_irqcfg &= ~MANTIS_MASK_PLUGOUT; + mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG); + udelay(500); + ca->slot_state = MODULE_XTRACTED; + } + udelay(100); +} int mantis_pcmcia_init(struct mantis_ca *ca) { struct mantis_pci *mantis = ca->ca_priv; + u32 gpif_stat, card_stat; + + gpif_stat = mmread(MANTIS_GPIF_STATUS); + card_stat = mmread(MANTIS_GPIF_IRQCFG); + + if (gpif_stat & MANTIS_GPIF_DETSTAT) { + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num); + mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG); + ca->slot_state = MODULE_INSERTED; + } else { + dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num); + mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG); + ca->slot_state = MODULE_XTRACTED; + } + return 0; } @@ -31,4 +95,6 @@ void mantis_pcmcia_exit(struct mantis_ca *ca) { struct mantis_pci *mantis = ca->ca_priv; + mmwrite(mmread(MANTIS_GPIF_STATUS) & (~MANTIS_CARD_PLUGOUT | ~MANTIS_CARD_PLUGIN), MANTIS_GPIF_STATUS); + mmwrite(mmread(MANTIS_INT_MASK) & ~MANTIS_INT_IRQ0, MANTIS_INT_MASK); } From 50d82602760c99d2c954c33360990c00146532cd Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:06:38 -0300 Subject: [PATCH 1059/1626] V4L/DVB (13737): [Mantis] Register the CA device, dummy functions for now Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/Makefile | 1 + drivers/media/dvb/mantis/mantis_ca.c | 127 +++++++++++++++++++++++++ drivers/media/dvb/mantis/mantis_evm.c | 4 + drivers/media/dvb/mantis/mantis_link.h | 8 ++ 4 files changed, 140 insertions(+) create mode 100644 drivers/media/dvb/mantis/mantis_ca.c diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile index 38d0e6dbafe3..c4da0d8ed186 100644 --- a/drivers/media/dvb/mantis/Makefile +++ b/drivers/media/dvb/mantis/Makefile @@ -4,6 +4,7 @@ mantis-objs = mantis_core.o \ mantis_i2c.o \ mantis_dvb.o \ mantis_evm.o \ + mantis_ca.o \ mantis_pcmcia.o \ mantis_vp1033.o \ mantis_vp1034.o \ diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c new file mode 100644 index 000000000000..6e440d31b79b --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -0,0 +1,127 @@ +/* + Mantis PCI bridge driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_link.h" +#include "mantis_hif.h" + + +static int mantis_ca_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long parg) +{ + return 0; +} + +static int mantis_ca_open(struct inode *inode, struct file *file) +{ + return 0; +} + +static int mantis_ca_release(struct inode *inode, struct file *file) +{ + return 0; +} + +static ssize_t mantis_ca_read(struct file *file, char __user *buffer, size_t count, loff_t *ofset) +{ + struct dvb_device *dvbdev = file->private_data; + struct mantis_ca *ca = dvbdev->priv; + + int status; + + return 0; +error: + return status; +} + +static ssize_t mantis_ca_write(struct file *file, const char __user *buffer, size_t count, loff_t *offset) +{ + struct dvb_device *dvbdev = file->private_data; + struct mantis_ca *ca = dvbdev->priv; + + int status; + + return 0; +error: + return status; +} + +static struct file_operations mantis_fops = { + .owner = THIS_MODULE, + .ioctl = mantis_ca_ioctl, + .open = mantis_ca_open, + .release = mantis_ca_release, + .read = mantis_ca_read, + .write = mantis_ca_write, +}; + +static struct dvb_device mantis_ca = { + .priv = NULL, + .users = 1, + .readers = 1, + .writers = 1, + .fops = &mantis_fops, +}; + +struct dvb_device *mantis_ca_init(struct mantis_pci *mantis) +{ + int ret; + + struct dvb_device *dvbdev; + struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter; + struct mantis_ca *ca; + + if (!(ca = kzalloc(sizeof (struct mantis_ca), GFP_KERNEL))) { + dprintk(verbose, MANTIS_ERROR, 1, "Out of memory!, exiting .."); + return NULL; + } + + ca->ca_priv = mantis; + mantis->mantis_ca = ca; + mantis_evmgr_init(ca); + + dprintk(verbose, MANTIS_ERROR, 0, "CA: Registering Mantis Adapter(%d) Slot(0)\n", mantis->num); + if (dvb_register_device(dvb_adapter, &dvbdev, &mantis_ca, ca, DVB_DEVICE_CA) == 0) { + ca->ca_dev = dvbdev; + return ca->ca_dev; + } + return 0; + +error: + if (ca != NULL) { + dprintk(verbose, MANTIS_ERROR, 1, "Error .."); + if (ca->ca_dev != NULL) + dvb_unregister_device(ca->ca_dev); + + kfree(ca); + } + return NULL; +} + +void mantis_ca_exit(struct mantis_pci *mantis) +{ + struct mantis_ca *ca = mantis->mantis_ca; + + mantis_evmgr_exit(ca); + dprintk(verbose, MANTIS_ERROR, 0, "CA: Unregister Mantis Adapter(%d) Slot(0)\n", mantis->num); + if (ca->ca_dev) + dvb_unregister_device(ca->ca_dev); + + kfree(ca); +} diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index 9f1740ea389c..c4a1c89431e1 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -90,6 +90,8 @@ int mantis_evmgr_init(struct mantis_ca *ca) dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager"); tasklet_init(&ca->hif_evm_tasklet, mantis_hifevm_tasklet, (unsigned long) ca); + mantis_pcmcia_init(ca); + return 0; } @@ -99,4 +101,6 @@ void mantis_evmgr_exit(struct mantis_ca *ca) dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting"); tasklet_kill(&ca->hif_evm_tasklet); + + mantis_pcmcia_exit(ca); } diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h index c6b32229edde..a45dd7185e06 100644 --- a/drivers/media/dvb/mantis/mantis_link.h +++ b/drivers/media/dvb/mantis/mantis_link.h @@ -56,4 +56,12 @@ struct mantis_ca { void *ca_priv; }; +/* CA */ +extern void mantis_event_cam_plugin(struct mantis_ca *ca); +extern void mantis_event_cam_unplug(struct mantis_ca *ca); +extern int mantis_pcmcia_init(struct mantis_ca *ca); +extern void mantis_pcmcia_exit(struct mantis_ca *ca); +extern int mantis_evmgr_init(struct mantis_ca *ca); +extern void mantis_evmgr_exit(struct mantis_ca *ca); + #endif // __MANTIS_LINK_H From d9dd5f7168d6a61491996fc02e4deb9d96308178 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:07:41 -0300 Subject: [PATCH 1060/1626] V4L/DVB (13738): [Mantis] Enable IRQ0 events Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_ca.c | 4 ++-- drivers/media/dvb/mantis/mantis_dvb.c | 2 ++ drivers/media/dvb/mantis/mantis_evm.c | 26 ++++++++++++------------ drivers/media/dvb/mantis/mantis_pci.c | 10 ++++----- drivers/media/dvb/mantis/mantis_pcmcia.c | 9 ++++---- 5 files changed, 26 insertions(+), 25 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index 6e440d31b79b..e6de3c9d3ce4 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -93,12 +93,12 @@ struct dvb_device *mantis_ca_init(struct mantis_pci *mantis) } ca->ca_priv = mantis; - mantis->mantis_ca = ca; - mantis_evmgr_init(ca); dprintk(verbose, MANTIS_ERROR, 0, "CA: Registering Mantis Adapter(%d) Slot(0)\n", mantis->num); if (dvb_register_device(dvb_adapter, &dvbdev, &mantis_ca, ca, DVB_DEVICE_CA) == 0) { ca->ca_dev = dvbdev; + mantis->mantis_ca = ca; + mantis_evmgr_init(ca); return ca->ca_dev; } return 0; diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index 9634b972a0f9..3325b59ce19c 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -190,6 +190,8 @@ int __devinit mantis_dvb_init(struct mantis_pci *mantis) dvb_net_init(&mantis->dvb_adapter, &mantis->dvbnet, &mantis->demux.dmx); tasklet_init(&mantis->tasklet, mantis_dma_xfer, (unsigned long) mantis); mantis_frontend_init(mantis); + mantis_ca_init(mantis); + return 0; /* Error conditions .. */ diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index c4a1c89431e1..d81068d08345 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -33,14 +33,14 @@ void mantis_hifevm_tasklet(unsigned long data) if (gpif_stat & MANTIS_GPIF_DETSTAT) { if (gpif_stat & MANTIS_CARD_PLUGIN) { - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num); + dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num); mmwrite(0xdada0000, MANTIS_CARD_RESET); // Plugin call here gpif_stat = 0; // crude ! } } else { if (gpif_stat & MANTIS_CARD_PLUGOUT) { - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num); + dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num); mmwrite(0xdada0000, MANTIS_CARD_RESET); // Unplug call here gpif_stat = 0; // crude ! @@ -48,34 +48,34 @@ void mantis_hifevm_tasklet(unsigned long data) } if (gpif_stat & MANTIS_GPIF_EXTIRQ) - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num); + dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num); if (gpif_stat & MANTIS_SBUF_WSTO) - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num); + dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num); if (gpif_stat & MANTIS_GPIF_OTHERR) - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num); + dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num); if (gpif_stat & MANTIS_SBUF_OVFLW) - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num); + dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num); if (gpif_stat & MANTIS_GPIF_BRRDY) { - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num); + dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num); ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL; if (ca->hif_job_queue & MANTIS_HIF_MEMRD) wake_up(&ca->hif_brrdyw_wq); } if (gpif_stat & MANTIS_GPIF_WRACK) - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Slave Write ACK", mantis->num); + dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Slave Write ACK", mantis->num); if (gpif_stat & MANTIS_GPIF_INTSTAT) - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num); + dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num); if (gpif_stat & MANTIS_SBUF_EMPTY) - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num); + dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num); if (gpif_stat & MANTIS_SBUF_OPDONE) { - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num); + dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num); if (ca->hif_job_queue) { wake_up(&ca->hif_opdone_wq); ca->hif_event = MANTIS_SBUF_OPDONE; @@ -87,7 +87,7 @@ int mantis_evmgr_init(struct mantis_ca *ca) { struct mantis_pci *mantis = ca->ca_priv; - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager"); + dprintk(verbose, MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager"); tasklet_init(&ca->hif_evm_tasklet, mantis_hifevm_tasklet, (unsigned long) ca); mantis_pcmcia_init(ca); @@ -99,7 +99,7 @@ void mantis_evmgr_exit(struct mantis_ca *ca) { struct mantis_pci *mantis = ca->ca_priv; - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting"); + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting"); tasklet_kill(&ca->hif_evm_tasklet); mantis_pcmcia_exit(ca); diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c index 402f866e12d9..814c6ace3d37 100644 --- a/drivers/media/dvb/mantis/mantis_pci.c +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -54,12 +54,15 @@ static irqreturn_t mantis_pci_irq(int irq, void *dev_id) { u32 stat = 0, mask = 0, lstat = 0, mstat = 0; struct mantis_pci *mantis; + struct mantis_ca *ca; mantis = (struct mantis_pci *) dev_id; if (unlikely(mantis == NULL)) { dprintk(verbose, MANTIS_ERROR, 1, "Mantis == NULL"); return IRQ_NONE; } + ca = mantis->mantis_ca; + stat = mmread(MANTIS_INT_STAT); mask = mmread(MANTIS_INT_MASK); mstat = lstat = stat & ~MANTIS_INT_RISCSTAT; @@ -72,14 +75,9 @@ static irqreturn_t mantis_pci_irq(int irq, void *dev_id) if (stat & MANTIS_INT_RISCEN) { dprintk(verbose, MANTIS_DEBUG, 0, "* DMA enabl *"); } - if (stat & MANTIS_INT_I2CRACK) { - dprintk(verbose, MANTIS_DEBUG, 0, "* I2C R-ACK *"); - } - if (stat & MANTIS_INT_PCMCIA7) { - dprintk(verbose, MANTIS_DEBUG, 0, "* PCMCIA-07 *"); - } if (stat & MANTIS_INT_IRQ0) { dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-0 *"); + tasklet_schedule(&ca->hif_evm_tasklet); } if (stat & MANTIS_INT_IRQ1) { dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-1 *"); diff --git a/drivers/media/dvb/mantis/mantis_pcmcia.c b/drivers/media/dvb/mantis/mantis_pcmcia.c index 960123f1ed44..47cc720d35dd 100644 --- a/drivers/media/dvb/mantis/mantis_pcmcia.c +++ b/drivers/media/dvb/mantis/mantis_pcmcia.c @@ -32,7 +32,7 @@ void mantis_event_cam_plugin(struct mantis_ca *ca) u32 gpif_irqcfg; if (ca->slot_state == MODULE_XTRACTED) { - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num); + dprintk(verbose, MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num); udelay(50); mmwrite(0xda000000, MANTIS_CARD_RESET); gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG); @@ -56,7 +56,7 @@ void mantis_event_cam_unplug(struct mantis_ca *ca) u32 gpif_irqcfg; if (ca->slot_state == MODULE_INSERTED) { - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num); + dprintk(verbose, MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num); udelay(50); mmwrite(0x00da0000, MANTIS_CARD_RESET); gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG); @@ -75,15 +75,16 @@ int mantis_pcmcia_init(struct mantis_ca *ca) u32 gpif_stat, card_stat; + mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_IRQ0, MANTIS_INT_MASK); gpif_stat = mmread(MANTIS_GPIF_STATUS); card_stat = mmread(MANTIS_GPIF_IRQCFG); if (gpif_stat & MANTIS_GPIF_DETSTAT) { - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num); + dprintk(verbose, MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num); mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG); ca->slot_state = MODULE_INSERTED; } else { - dprintk(mantis->verbose, MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num); + dprintk(verbose, MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num); mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG); ca->slot_state = MODULE_XTRACTED; } From 3062b1571a1d3520c4d3160ebbfca8002b1d6963 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:08:25 -0300 Subject: [PATCH 1061/1626] V4L/DVB (13739): [Mantis] Event Manager: Handle Masked events only Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_dvb.c | 1 + drivers/media/dvb/mantis/mantis_evm.c | 5 ++++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index 3325b59ce19c..ade444963c84 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -313,6 +313,7 @@ int __devinit mantis_frontend_init(struct mantis_pci *mantis) int __devexit mantis_dvb_exit(struct mantis_pci *mantis) { + mantis_ca_exit(mantis); tasklet_kill(&mantis->tasklet); dvb_net_release(&mantis->dvbnet); mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem); diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index d81068d08345..c35ddd868f89 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -27,9 +27,12 @@ void mantis_hifevm_tasklet(unsigned long data) struct mantis_ca *ca = (struct mantis_ca *) data; struct mantis_pci *mantis = ca->ca_priv; - u32 gpif_stat; + u32 gpif_stat, gpif_mask; gpif_stat = mmread(MANTIS_GPIF_STATUS); + gpif_mask = mmread(MANTIS_GPIF_IRQCFG); + if (!((gpif_stat & 0xff) & (gpif_mask & 0xff))) + return; if (gpif_stat & MANTIS_GPIF_DETSTAT) { if (gpif_stat & MANTIS_CARD_PLUGIN) { From 12855cac87218d0c92ffdebb7270cec040cf5a6a Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:09:04 -0300 Subject: [PATCH 1062/1626] V4L/DVB (13740): [Mantis] Schedule the work instead of handling the task directly Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_common.h | 4 ++++ drivers/media/dvb/mantis/mantis_evm.c | 17 +++++++---------- drivers/media/dvb/mantis/mantis_link.h | 4 +++- drivers/media/dvb/mantis/mantis_pci.c | 2 +- 4 files changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index f9891ebcfb0d..7f1cfad74883 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -151,4 +151,8 @@ extern int mantis_dvb_exit(struct mantis_pci *mantis); extern void mantis_dma_xfer(unsigned long data); extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value); +extern struct dvb_device *mantis_ca_init(struct mantis_pci *mantis); +extern void mantis_ca_exit(struct mantis_pci *mantis); + + #endif //__MANTIS_COMMON_H diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index c35ddd868f89..745148399981 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -22,9 +22,9 @@ #include "mantis_link.h" #include "mantis_hif.h" -void mantis_hifevm_tasklet(unsigned long data) +static void mantis_hifevm_work(struct work_struct *work) { - struct mantis_ca *ca = (struct mantis_ca *) data; + struct mantis_ca *ca = container_of(work, struct mantis_ca, hif_evm_work); struct mantis_pci *mantis = ca->ca_priv; u32 gpif_stat, gpif_mask; @@ -38,15 +38,13 @@ void mantis_hifevm_tasklet(unsigned long data) if (gpif_stat & MANTIS_CARD_PLUGIN) { dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num); mmwrite(0xdada0000, MANTIS_CARD_RESET); - // Plugin call here - gpif_stat = 0; // crude ! + mantis_event_cam_plugin(ca); } } else { if (gpif_stat & MANTIS_CARD_PLUGOUT) { dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num); mmwrite(0xdada0000, MANTIS_CARD_RESET); - // Unplug call here - gpif_stat = 0; // crude ! + mantis_event_cam_unplug(ca); } } @@ -91,9 +89,9 @@ int mantis_evmgr_init(struct mantis_ca *ca) struct mantis_pci *mantis = ca->ca_priv; dprintk(verbose, MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager"); - tasklet_init(&ca->hif_evm_tasklet, mantis_hifevm_tasklet, (unsigned long) ca); - + INIT_WORK(&ca->hif_evm_work, mantis_hifevm_work); mantis_pcmcia_init(ca); + schedule_work(&ca->hif_evm_work); return 0; } @@ -103,7 +101,6 @@ void mantis_evmgr_exit(struct mantis_ca *ca) struct mantis_pci *mantis = ca->ca_priv; dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting"); - tasklet_kill(&ca->hif_evm_tasklet); - + flush_scheduled_work(); mantis_pcmcia_exit(ca); } diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h index a45dd7185e06..33b39b781d2e 100644 --- a/drivers/media/dvb/mantis/mantis_link.h +++ b/drivers/media/dvb/mantis/mantis_link.h @@ -21,6 +21,8 @@ #ifndef __MANTIS_LINK_H #define __MANTIS_LINK_H +#include + enum mantis_sbuf_status { MANTIS_SBUF_DATA_AVAIL = 1, MANTIS_SBUF_DATA_EMPTY = 2, @@ -40,7 +42,7 @@ enum mantis_slot_state { struct mantis_ca { struct mantis_slot slot; - struct tasklet_struct hif_evm_tasklet; + struct work_struct hif_evm_work; u32 hif_event; wait_queue_head_t hif_opdone_wq; diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c index 814c6ace3d37..6eecd54a4457 100644 --- a/drivers/media/dvb/mantis/mantis_pci.c +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -77,7 +77,7 @@ static irqreturn_t mantis_pci_irq(int irq, void *dev_id) } if (stat & MANTIS_INT_IRQ0) { dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-0 *"); - tasklet_schedule(&ca->hif_evm_tasklet); + schedule_work(&ca->hif_evm_work); } if (stat & MANTIS_INT_IRQ1) { dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-1 *"); From d8b14f8a76d71c84622a211f57baf15f61cc9703 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:09:47 -0300 Subject: [PATCH 1063/1626] V4L/DVB (13741): [Mantis] Implement HIF Mem Read/Write operations Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/Makefile | 1 + drivers/media/dvb/mantis/mantis_dma.c | 4 +- drivers/media/dvb/mantis/mantis_evm.c | 3 +- drivers/media/dvb/mantis/mantis_hif.c | 139 +++++++++++++++++++++++++ drivers/media/dvb/mantis/mantis_link.h | 10 +- drivers/media/dvb/mantis/mantis_reg.h | 8 +- 6 files changed, 157 insertions(+), 8 deletions(-) create mode 100644 drivers/media/dvb/mantis/mantis_hif.c diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile index c4da0d8ed186..d002ef9f7449 100644 --- a/drivers/media/dvb/mantis/Makefile +++ b/drivers/media/dvb/mantis/Makefile @@ -4,6 +4,7 @@ mantis-objs = mantis_core.o \ mantis_i2c.o \ mantis_dvb.o \ mantis_evm.o \ + mantis_hif.o \ mantis_ca.o \ mantis_pcmcia.o \ mantis_vp1033.o \ diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c index f685992f7d0a..250f49a913aa 100644 --- a/drivers/media/dvb/mantis/mantis_dma.c +++ b/drivers/media/dvb/mantis/mantis_dma.c @@ -190,7 +190,7 @@ void mantis_dma_start(struct mantis_pci *mantis) mantis_risc_program(mantis); mmwrite(mantis->risc_dma, MANTIS_RISC_START); - mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_RDWRN, MANTIS_GPIF_ADDR); + mmwrite(mmread(MANTIS_GPIF_HIFADDR) | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_HIFADDR); mmwrite(0, MANTIS_DMA_CTL); mantis->last_block = mantis->finished_block = 0; @@ -210,7 +210,7 @@ void mantis_dma_stop(struct mantis_pci *mantis) mask = mmread(MANTIS_INT_MASK); dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Stop DMA engine"); - mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_RDWRN))), MANTIS_GPIF_ADDR); + mmwrite((mmread(MANTIS_GPIF_HIFADDR) & (~(MANTIS_GPIF_HIFRDWRN))), MANTIS_GPIF_HIFADDR); mmwrite((mmread(MANTIS_DMA_CTL) & ~(MANTIS_FIFO_EN | MANTIS_DCAP_EN | diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index 745148399981..dbcdca3a8f03 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -92,7 +92,7 @@ int mantis_evmgr_init(struct mantis_ca *ca) INIT_WORK(&ca->hif_evm_work, mantis_hifevm_work); mantis_pcmcia_init(ca); schedule_work(&ca->hif_evm_work); - + mantis_hif_init(ca); return 0; } @@ -102,5 +102,6 @@ void mantis_evmgr_exit(struct mantis_ca *ca) dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting"); flush_scheduled_work(); + mantis_hif_exit(ca); mantis_pcmcia_exit(ca); } diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c new file mode 100644 index 000000000000..1472008e257e --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -0,0 +1,139 @@ +/* + Mantis PCI bridge driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_hif.h" +#include "mantis_link.h" /* temporary due to physical layer stuff */ + +static int mantis_hif_data_available(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + int rc = 0; + + if (wait_event_interruptible_timeout(ca->hif_data_wq, + ca->sbuf_status & MANTIS_SBUF_DATA_AVAIL, + msecs_to_jiffies(500)) == -ERESTARTSYS) { + + dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Read wait event timeout !", mantis->num); + rc = -EREMOTEIO; + } + ca->sbuf_status &= ~MANTIS_SBUF_DATA_AVAIL; + udelay(2); + return rc; +} + +static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + int rc = 0; + + if (wait_event_interruptible_timeout(ca->hif_opdone_wq, + ca->hif_event & MANTIS_SBUF_OPDONE, + msecs_to_jiffies(500)) == -ERESTARTSYS) { + + dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num); + rc = -EREMOTEIO; + } + ca->hif_event &= ~MANTIS_SBUF_OPDONE; + udelay(5); + return rc; +} + +int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 hif_addr = 0, data, count = 4; + + hif_addr |= MANTIS_GPIF_HIFRDWRN; + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; + hif_addr |= addr; + + mmwrite(hif_addr, MANTIS_GPIF_BRADDR); + mmwrite(count, MANTIS_GPIF_BRBYTES); + + udelay(20); + + mmwrite(hif_addr, MANTIS_GPIF_HIFADDR); + if (mantis_hif_data_available(ca) != 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer burst read failed", mantis->num); + return -EREMOTEIO; + } + if (mantis_hif_sbuf_opdone_wait(ca) != 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num); + return -EREMOTEIO; + } + data = mmread(MANTIS_GPIF_HIFDIN); + + return (data >> 24) & 0xff; +} + +int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) +{ + struct mantis_slot *slot = ca->slot; + struct mantis_pci *mantis = ca->ca_priv; + u32 hif_addr = 0; + + hif_addr &= ~MANTIS_GPIF_HIFRDWRN; + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; + hif_addr |= addr; + + mmwrite(slot->slave_cfg, MANTIS_GPIF_CFGSLA); /* Slot0 alone for now */ + + mmwrite(hif_addr, MANTIS_GPIF_HIFADDR); + mmwrite(data, MANTIS_GPIF_HIFDOUT); + ca->hif_job_queue = MANTIS_HIF_MEMWR; + + if (mantis_hif_sbuf_opdone_wait(ca) != 0) { + ca->hif_job_queue &= ~MANTIS_HIF_MEMWR; + dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + return -EREMOTEIO; + } + ca->hif_job_queue &= ~MANTIS_HIF_MEMWR; + return 0; +} + +int mantis_hif_init(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 irqcfg; + + dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num); + init_waitqueue_head(&ca->hif_data_wq); + init_waitqueue_head(&ca->hif_opdone_wq); + + irqcfg = mmread(MANTIS_GPIF_IRQCFG); + irqcfg |= MANTIS_MASK_BRRDY; + mmwrite(irqcfg, MANTIS_GPIF_IRQCFG); + + return 0; +} + +void mantis_hif_exit(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 irqcfg; + + dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num); + irqcfg = mmread(MANTIS_GPIF_IRQCFG); + irqcfg &= ~MANTIS_MASK_BRRDY; + mmwrite(irqcfg, MANTIS_GPIF_IRQCFG); +} diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h index 33b39b781d2e..8862502866c5 100644 --- a/drivers/media/dvb/mantis/mantis_link.h +++ b/drivers/media/dvb/mantis/mantis_link.h @@ -31,6 +31,8 @@ enum mantis_sbuf_status { struct mantis_slot { u32 timeout; + u32 slave_cfg; + u32 bar; }; /* Physical layer */ @@ -40,7 +42,7 @@ enum mantis_slot_state { }; struct mantis_ca { - struct mantis_slot slot; + struct mantis_slot slot[4]; struct work_struct hif_evm_work; @@ -66,4 +68,10 @@ extern void mantis_pcmcia_exit(struct mantis_ca *ca); extern int mantis_evmgr_init(struct mantis_ca *ca); extern void mantis_evmgr_exit(struct mantis_ca *ca); +/* HIF */ +extern int mantis_hif_init(struct mantis_ca *ca); +extern void mantis_hif_exit(struct mantis_ca *ca); +extern int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr); +extern int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data); + #endif // __MANTIS_LINK_H diff --git a/drivers/media/dvb/mantis/mantis_reg.h b/drivers/media/dvb/mantis/mantis_reg.h index d9862b7dbf03..6f5cd4936763 100644 --- a/drivers/media/dvb/mantis/mantis_reg.h +++ b/drivers/media/dvb/mantis/mantis_reg.h @@ -147,16 +147,16 @@ #define MANTIS_CARD_RESET 0xac #define MANTIS_GPIF_ADDR 0xb0 -#define MANTIS_GPIF_RDWRN (0x01 << 31) +#define MANTIS_GPIF_HIFRDWRN (0x01 << 31) #define MANTIS_GPIF_PCMCIAREG (0x01 << 27) #define MANTIS_GPIF_PCMCIAIOM (0x01 << 26) -#define MANTIS_GPIF_HIF_ADDR (0xfffffff << 0) +#define MANTIS_GPIF_HIFADDR (0xfffffff << 0) #define MANTIS_GPIF_DOUT 0xb4 -#define MANTIS_GPIF_HIF_DOUT (0xfffffff << 0) +#define MANTIS_GPIF_HIFDOUT (0xfffffff << 0) #define MANTIS_GPIF_DIN 0xb8 -#define MANTIS_GPIF_HIF_DIN (0xfffffff << 0) +#define MANTIS_GPIF_HIFDIN (0xfffffff << 0) #define MANTIS_GPIF_SPARE 0xbc #define MANTIS_GPIF_LOGICRD (0xffff << 16) From c9a750c909cbde15ecd0f8545f48e051bfee6271 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:10:25 -0300 Subject: [PATCH 1064/1626] V4L/DVB (13742): [Mantis] Implement PCMCIA I/O Rd/Wr operations Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_hif.c | 54 ++++++++++++++++++++++++++ drivers/media/dvb/mantis/mantis_link.h | 2 + 2 files changed, 56 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 1472008e257e..42aedf7a0147 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -111,6 +111,60 @@ int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) return 0; } +int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr, u32 count, u32 *data) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 hif_addr = 0; + + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr |= MANTIS_GPIF_HIFRDWRN; + hif_addr |= MANTIS_GPIF_PCMCIAIOM; + hif_addr |= addr; + + mmwrite(hif_addr, MANTIS_GPIF_HIFADDR); + ca->hif_job_queue = MANTIS_HIF_IOMRD; + + if (mantis_hif_sbuf_opdone_wait(ca) != 0) { + ca->hif_job_queue &= ~MANTIS_HIF_IOMRD; + dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + return -EREMOTEIO; + } + udelay(50); + ca->hif_job_queue &= ~MANTIS_HIF_IOMRD; + *data = mmread(MANTIS_GPIF_HIFDIN); + hif_addr |= MANTIS_GPIF_PCMCIAREG; + mmwrite(hif_addr, MANTIS_GPIF_HIFADDR); + + return 0; +} + +int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u32 data) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 hif_addr = 0; + + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr &= ~MANTIS_GPIF_HIFRDWRN; + hif_addr |= MANTIS_GPIF_PCMCIAIOM; + hif_addr |= addr; + + mmwrite(hif_addr, MANTIS_GPIF_HIFADDR); + mmwrite(data, MANTIS_GPIF_HIFDOUT); + + ca->hif_job_queue = MANTIS_HIF_IOMWR; + if (mantis_hif_sbuf_opdone_wait(ca) != 0) { + ca->hif_job_queue &= ~MANTIS_HIF_IOMWR; + dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + return -EREMOTEIO; + } + udelay(50); + ca->hif_job_queue &= ~MANTIS_HIF_IOMWR; + hif_addr |= MANTIS_GPIF_PCMCIAREG; + mmwrite(hif_addr, MANTIS_GPIF_HIFADDR); + + return 0; +} + int mantis_hif_init(struct mantis_ca *ca) { struct mantis_pci *mantis = ca->ca_priv; diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h index 8862502866c5..478900ea184d 100644 --- a/drivers/media/dvb/mantis/mantis_link.h +++ b/drivers/media/dvb/mantis/mantis_link.h @@ -73,5 +73,7 @@ extern int mantis_hif_init(struct mantis_ca *ca); extern void mantis_hif_exit(struct mantis_ca *ca); extern int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr); extern int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data); +extern int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr, u32 count, u32 *data); +extern int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u32 data); #endif // __MANTIS_LINK_H From 6053240f5cc914d40ac9c7afe15008bf3e46359c Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:11:14 -0300 Subject: [PATCH 1065/1626] V4L/DVB (13743): [Mantis CA] Use DVB_CA Tuple parser Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_ca.c | 135 ++++++++++++----------- drivers/media/dvb/mantis/mantis_common.h | 2 +- drivers/media/dvb/mantis/mantis_hif.c | 10 +- drivers/media/dvb/mantis/mantis_link.h | 9 +- 4 files changed, 83 insertions(+), 73 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index e6de3c9d3ce4..4be61ca02c20 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -22,96 +22,104 @@ #include "mantis_link.h" #include "mantis_hif.h" +static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr) +{ + struct mantis_ca *ca = en50221->data; -static int mantis_ca_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long parg) + if (slot != 0) + return -EINVAL; + + return mantis_hif_read_mem(ca, addr); +} + +static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr, u8 data) +{ + struct mantis_ca *ca = en50221->data; + + if (slot != 0) + return -EINVAL; + + return mantis_hif_write_mem(ca, addr, data); +} + +static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr) +{ + struct mantis_ca *ca = en50221->data; + + if (slot != 0) + return -EINVAL; + + return mantis_hif_read_iom(ca, addr); +} + +static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr, u8 data) +{ + struct mantis_ca *ca = en50221->data; + + if (slot != 0) + return -EINVAL; + + return mantis_hif_write_iom(ca, addr, data); +} + +static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot) { return 0; } -static int mantis_ca_open(struct inode *inode, struct file *file) +static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) { return 0; } -static int mantis_ca_release(struct inode *inode, struct file *file) +static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot) { return 0; } -static ssize_t mantis_ca_read(struct file *file, char __user *buffer, size_t count, loff_t *ofset) +static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open) { - struct dvb_device *dvbdev = file->private_data; - struct mantis_ca *ca = dvbdev->priv; - - int status; - return 0; -error: - return status; } -static ssize_t mantis_ca_write(struct file *file, const char __user *buffer, size_t count, loff_t *offset) +int mantis_ca_init(struct mantis_pci *mantis) { - struct dvb_device *dvbdev = file->private_data; - struct mantis_ca *ca = dvbdev->priv; - - int status; - - return 0; -error: - return status; -} - -static struct file_operations mantis_fops = { - .owner = THIS_MODULE, - .ioctl = mantis_ca_ioctl, - .open = mantis_ca_open, - .release = mantis_ca_release, - .read = mantis_ca_read, - .write = mantis_ca_write, -}; - -static struct dvb_device mantis_ca = { - .priv = NULL, - .users = 1, - .readers = 1, - .writers = 1, - .fops = &mantis_fops, -}; - -struct dvb_device *mantis_ca_init(struct mantis_pci *mantis) -{ - int ret; - - struct dvb_device *dvbdev; struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter; struct mantis_ca *ca; + int ca_flags = 0, result; if (!(ca = kzalloc(sizeof (struct mantis_ca), GFP_KERNEL))) { dprintk(verbose, MANTIS_ERROR, 1, "Out of memory!, exiting .."); - return NULL; + result = -ENOMEM; + goto err; } ca->ca_priv = mantis; + mantis->mantis_ca = ca; - dprintk(verbose, MANTIS_ERROR, 0, "CA: Registering Mantis Adapter(%d) Slot(0)\n", mantis->num); - if (dvb_register_device(dvb_adapter, &dvbdev, &mantis_ca, ca, DVB_DEVICE_CA) == 0) { - ca->ca_dev = dvbdev; - mantis->mantis_ca = ca; - mantis_evmgr_init(ca); - return ca->ca_dev; + /* register CA interface */ + ca->en50221.owner = THIS_MODULE; + ca->en50221.read_attribute_mem = mantis_ca_read_attr_mem; + ca->en50221.write_attribute_mem = mantis_ca_write_attr_mem; + ca->en50221.read_cam_control = mantis_ca_read_cam_ctl; + ca->en50221.write_cam_control = mantis_ca_write_cam_ctl; + ca->en50221.slot_reset = mantis_ca_slot_reset; + ca->en50221.slot_shutdown = mantis_ca_slot_shutdown; + ca->en50221.slot_ts_enable = mantis_ts_control; + ca->en50221.poll_slot_status = mantis_slot_status; + ca->en50221.data = ca; + + dprintk(verbose, MANTIS_ERROR, 1, "Registering EN50221 device"); + if ((result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1)) != 0) { + dprintk(verbose, MANTIS_ERROR, 1, "EN50221: Initialization failed"); + goto err; } + dprintk(verbose, MANTIS_ERROR, 1, "Registered EN50221 device"); + mantis_evmgr_init(ca); return 0; - -error: - if (ca != NULL) { - dprintk(verbose, MANTIS_ERROR, 1, "Error .."); - if (ca->ca_dev != NULL) - dvb_unregister_device(ca->ca_dev); - - kfree(ca); - } - return NULL; +err: + kfree(ca); + return result; } void mantis_ca_exit(struct mantis_pci *mantis) @@ -119,9 +127,8 @@ void mantis_ca_exit(struct mantis_pci *mantis) struct mantis_ca *ca = mantis->mantis_ca; mantis_evmgr_exit(ca); - dprintk(verbose, MANTIS_ERROR, 0, "CA: Unregister Mantis Adapter(%d) Slot(0)\n", mantis->num); - if (ca->ca_dev) - dvb_unregister_device(ca->ca_dev); + dprintk(verbose, MANTIS_ERROR, 1, "Unregistering EN50221 device"); + dvb_ca_en50221_release(&ca->en50221); kfree(ca); } diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index 7f1cfad74883..0aa4001dea9c 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -151,7 +151,7 @@ extern int mantis_dvb_exit(struct mantis_pci *mantis); extern void mantis_dma_xfer(unsigned long data); extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value); -extern struct dvb_device *mantis_ca_init(struct mantis_pci *mantis); +extern int mantis_ca_init(struct mantis_pci *mantis); extern void mantis_ca_exit(struct mantis_pci *mantis); diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 42aedf7a0147..6a1ea96c16d9 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -111,10 +111,10 @@ int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) return 0; } -int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr, u32 count, u32 *data) +int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) { struct mantis_pci *mantis = ca->ca_priv; - u32 hif_addr = 0; + u32 data, hif_addr = 0; hif_addr &= ~MANTIS_GPIF_PCMCIAREG; hif_addr |= MANTIS_GPIF_HIFRDWRN; @@ -131,14 +131,14 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr, u32 count, u32 *data) } udelay(50); ca->hif_job_queue &= ~MANTIS_HIF_IOMRD; - *data = mmread(MANTIS_GPIF_HIFDIN); + data = mmread(MANTIS_GPIF_HIFDIN); hif_addr |= MANTIS_GPIF_PCMCIAREG; mmwrite(hif_addr, MANTIS_GPIF_HIFADDR); - return 0; + return data; } -int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u32 data) +int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) { struct mantis_pci *mantis = ca->ca_priv; u32 hif_addr = 0; diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h index 478900ea184d..23ff2d6aadbc 100644 --- a/drivers/media/dvb/mantis/mantis_link.h +++ b/drivers/media/dvb/mantis/mantis_link.h @@ -22,6 +22,7 @@ #define __MANTIS_LINK_H #include +#include "dvb_ca_en50221.h" enum mantis_sbuf_status { MANTIS_SBUF_DATA_AVAIL = 1, @@ -56,8 +57,10 @@ struct mantis_ca { enum mantis_slot_state slot_state; - struct dvb_device *ca_dev; +// struct dvb_device *ca_dev; void *ca_priv; + + struct dvb_ca_en50221 en50221; }; /* CA */ @@ -73,7 +76,7 @@ extern int mantis_hif_init(struct mantis_ca *ca); extern void mantis_hif_exit(struct mantis_ca *ca); extern int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr); extern int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data); -extern int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr, u32 count, u32 *data); -extern int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u32 data); +extern int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr); +extern int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data); #endif // __MANTIS_LINK_H From 4e9fbeeedc22d287b5d05e32bbc647cd2dc8c663 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:11:41 -0300 Subject: [PATCH 1066/1626] V4L/DVB (13744): [Mantis CA] Use Module status to signal Slot events Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_ca.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index 4be61ca02c20..cd6bed737296 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -79,6 +79,11 @@ static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot) static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open) { + struct mantis_ca *ca = en50221->data; + + if (ca->slot_state == MODULE_INSERTED) + return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; + return 0; } From 2133ffbf08e7fca0614ea73cb5c43cc6435b4414 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:12:16 -0300 Subject: [PATCH 1067/1626] V4L/DVB (13745): [Mantis CA] Add some debug statements Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_ca.c | 34 +++++++++++++++++++++++++++ drivers/media/dvb/mantis/mantis_hif.c | 4 ++++ 2 files changed, 38 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index cd6bed737296..a8b8c88238e0 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -25,6 +25,9 @@ static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr) { struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot); if (slot != 0) return -EINVAL; @@ -35,6 +38,9 @@ static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr, u8 data) { struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot); if (slot != 0) return -EINVAL; @@ -45,6 +51,9 @@ static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, in static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr) { struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot); if (slot != 0) return -EINVAL; @@ -55,6 +64,9 @@ static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 a static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr, u8 data) { struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot); if (slot != 0) return -EINVAL; @@ -64,22 +76,40 @@ static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot) { + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot); + return 0; } static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) { + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot); + return 0; } static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot) { + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): TS control", slot); + return 0; } static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open) { struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot); if (ca->slot_state == MODULE_INSERTED) return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; @@ -93,6 +123,7 @@ int mantis_ca_init(struct mantis_pci *mantis) struct mantis_ca *ca; int ca_flags = 0, result; + dprintk(verbose, MANTIS_DEBUG, 1, "Initializing Mantis CA"); if (!(ca = kzalloc(sizeof (struct mantis_ca), GFP_KERNEL))) { dprintk(verbose, MANTIS_ERROR, 1, "Out of memory!, exiting .."); result = -ENOMEM; @@ -130,6 +161,9 @@ err: void mantis_ca_exit(struct mantis_pci *mantis) { struct mantis_ca *ca = mantis->mantis_ca; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis CA exit"); mantis_evmgr_exit(ca); dprintk(verbose, MANTIS_ERROR, 1, "Unregistering EN50221 device"); diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 6a1ea96c16d9..42e0360e96d9 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -61,6 +61,7 @@ int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) struct mantis_pci *mantis = ca->ca_priv; u32 hif_addr = 0, data, count = 4; + dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num); hif_addr |= MANTIS_GPIF_HIFRDWRN; hif_addr &= ~MANTIS_GPIF_PCMCIAREG; hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; @@ -91,6 +92,7 @@ int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) struct mantis_pci *mantis = ca->ca_priv; u32 hif_addr = 0; + dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num); hif_addr &= ~MANTIS_GPIF_HIFRDWRN; hif_addr &= ~MANTIS_GPIF_PCMCIAREG; hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; @@ -116,6 +118,7 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) struct mantis_pci *mantis = ca->ca_priv; u32 data, hif_addr = 0; + dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num); hif_addr &= ~MANTIS_GPIF_PCMCIAREG; hif_addr |= MANTIS_GPIF_HIFRDWRN; hif_addr |= MANTIS_GPIF_PCMCIAIOM; @@ -143,6 +146,7 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) struct mantis_pci *mantis = ca->ca_priv; u32 hif_addr = 0; + dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num); hif_addr &= ~MANTIS_GPIF_PCMCIAREG; hif_addr &= ~MANTIS_GPIF_HIFRDWRN; hif_addr |= MANTIS_GPIF_PCMCIAIOM; From fbe1e43abc6ada6bcd3e9866b01e41f093f12c62 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:12:51 -0300 Subject: [PATCH 1068/1626] V4L/DVB (13746): [Mantis CA] Bug: Remove duplicated symbol Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_ca.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index a8b8c88238e0..f6d70cb3f6fe 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -161,7 +161,6 @@ err: void mantis_ca_exit(struct mantis_pci *mantis) { struct mantis_ca *ca = mantis->mantis_ca; - struct mantis_pci *mantis = ca->ca_priv; dprintk(verbose, MANTIS_DEBUG, 1, "Mantis CA exit"); From a0c59063a7fe92524ab8fa6e31997b177a8f3029 Mon Sep 17 00:00:00 2001 From: Sigmund Augdal Date: Fri, 4 Dec 2009 05:13:21 -0300 Subject: [PATCH 1069/1626] V4L/DVB (13747): [Mantis] Bug Fix!: Use Register Address rather than register field Signed-off-by: Sigmund Augdal Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_dma.c | 4 ++-- drivers/media/dvb/mantis/mantis_hif.c | 20 ++++++++++---------- 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c index 250f49a913aa..d15a1eb980c8 100644 --- a/drivers/media/dvb/mantis/mantis_dma.c +++ b/drivers/media/dvb/mantis/mantis_dma.c @@ -190,7 +190,7 @@ void mantis_dma_start(struct mantis_pci *mantis) mantis_risc_program(mantis); mmwrite(mantis->risc_dma, MANTIS_RISC_START); - mmwrite(mmread(MANTIS_GPIF_HIFADDR) | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_HIFADDR); + mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR); mmwrite(0, MANTIS_DMA_CTL); mantis->last_block = mantis->finished_block = 0; @@ -210,7 +210,7 @@ void mantis_dma_stop(struct mantis_pci *mantis) mask = mmread(MANTIS_INT_MASK); dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Stop DMA engine"); - mmwrite((mmread(MANTIS_GPIF_HIFADDR) & (~(MANTIS_GPIF_HIFRDWRN))), MANTIS_GPIF_HIFADDR); + mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_HIFRDWRN))), MANTIS_GPIF_ADDR); mmwrite((mmread(MANTIS_DMA_CTL) & ~(MANTIS_FIFO_EN | MANTIS_DCAP_EN | diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 42e0360e96d9..9e058be8726e 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -72,7 +72,7 @@ int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) udelay(20); - mmwrite(hif_addr, MANTIS_GPIF_HIFADDR); + mmwrite(hif_addr, MANTIS_GPIF_ADDR); if (mantis_hif_data_available(ca) != 0) { dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer burst read failed", mantis->num); return -EREMOTEIO; @@ -81,7 +81,7 @@ int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num); return -EREMOTEIO; } - data = mmread(MANTIS_GPIF_HIFDIN); + data = mmread(MANTIS_GPIF_DIN); return (data >> 24) & 0xff; } @@ -100,8 +100,8 @@ int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) mmwrite(slot->slave_cfg, MANTIS_GPIF_CFGSLA); /* Slot0 alone for now */ - mmwrite(hif_addr, MANTIS_GPIF_HIFADDR); - mmwrite(data, MANTIS_GPIF_HIFDOUT); + mmwrite(hif_addr, MANTIS_GPIF_ADDR); + mmwrite(data, MANTIS_GPIF_DOUT); ca->hif_job_queue = MANTIS_HIF_MEMWR; if (mantis_hif_sbuf_opdone_wait(ca) != 0) { @@ -124,7 +124,7 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) hif_addr |= MANTIS_GPIF_PCMCIAIOM; hif_addr |= addr; - mmwrite(hif_addr, MANTIS_GPIF_HIFADDR); + mmwrite(hif_addr, MANTIS_GPIF_ADDR); ca->hif_job_queue = MANTIS_HIF_IOMRD; if (mantis_hif_sbuf_opdone_wait(ca) != 0) { @@ -134,9 +134,9 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) } udelay(50); ca->hif_job_queue &= ~MANTIS_HIF_IOMRD; - data = mmread(MANTIS_GPIF_HIFDIN); + data = mmread(MANTIS_GPIF_DIN); hif_addr |= MANTIS_GPIF_PCMCIAREG; - mmwrite(hif_addr, MANTIS_GPIF_HIFADDR); + mmwrite(hif_addr, MANTIS_GPIF_ADDR); return data; } @@ -152,8 +152,8 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) hif_addr |= MANTIS_GPIF_PCMCIAIOM; hif_addr |= addr; - mmwrite(hif_addr, MANTIS_GPIF_HIFADDR); - mmwrite(data, MANTIS_GPIF_HIFDOUT); + mmwrite(hif_addr, MANTIS_GPIF_ADDR); + mmwrite(data, MANTIS_GPIF_DOUT); ca->hif_job_queue = MANTIS_HIF_IOMWR; if (mantis_hif_sbuf_opdone_wait(ca) != 0) { @@ -164,7 +164,7 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) udelay(50); ca->hif_job_queue &= ~MANTIS_HIF_IOMWR; hif_addr |= MANTIS_GPIF_PCMCIAREG; - mmwrite(hif_addr, MANTIS_GPIF_HIFADDR); + mmwrite(hif_addr, MANTIS_GPIF_ADDR); return 0; } From ea30d81a9634cb4c13bbef46877f0d7730c57552 Mon Sep 17 00:00:00 2001 From: Magnus Horlin Date: Fri, 4 Dec 2009 05:14:34 -0300 Subject: [PATCH 1070/1626] V4L/DVB (13748): [Mantis/VP-2040] Add support for VP-2040 (TDA10023 frontend based) Signed-off-by: Magnus Horlin Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_core.c | 1 + drivers/media/dvb/mantis/mantis_dvb.c | 1 + drivers/media/dvb/mantis/mantis_vp2040.h | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c index a164bb143631..b94d0515de4b 100644 --- a/drivers/media/dvb/mantis/mantis_core.c +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -119,6 +119,7 @@ static void mantis_load_config(struct mantis_pci *mantis) case MANTIS_VP_2033_DVB_C: // VP-2033 mantis->hwconfig = &vp2033_mantis_config; break; + case MANTIS_VP_2040_DVB_C: // VP-2040 case TERRATEC_CINERGY_C_PCI: // VP-2040 clone mantis->hwconfig = &vp2040_mantis_config; break; diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index ade444963c84..3940aed8af8d 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -273,6 +273,7 @@ int __devinit mantis_frontend_init(struct mantis_pci *mantis) } break; + case MANTIS_VP_2040_DVB_C: // VP-2040 case TERRATEC_CINERGY_C_PCI: dprintk(verbose, MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); mantis->fe = tda10023_attach(&tda10023_cu1216_config, &mantis->adapter, read_pwm(mantis)); diff --git a/drivers/media/dvb/mantis/mantis_vp2040.h b/drivers/media/dvb/mantis/mantis_vp2040.h index 825ccbb87ad3..69463cc4ccc8 100644 --- a/drivers/media/dvb/mantis/mantis_vp2040.h +++ b/drivers/media/dvb/mantis/mantis_vp2040.h @@ -25,6 +25,7 @@ #include "mantis_common.h" #include "tda1002x.h" +#define MANTIS_VP_2040_DVB_C 0x0043 #define TERRATEC_CINERGY_C_PCI 0x1178 extern struct tda1002x_config tda10023_cu1216_config; From ac23f4c86c3c901f95d72fc2262b22e6230d4feb Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:15:10 -0300 Subject: [PATCH 1071/1626] V4L/DVB (13749): [Mantis CA] CA_SLAVE: Do not change Slave Configuration setup (Need to sanitize this cleanly for different Slaves) Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_hif.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 9e058be8726e..d18fe4152449 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -171,9 +171,11 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) int mantis_hif_init(struct mantis_ca *ca) { + struct mantis_slot *slot = ca->slot; struct mantis_pci *mantis = ca->ca_priv; u32 irqcfg; + slot[0].slave_cfg = 0x70773028; dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num); init_waitqueue_head(&ca->hif_data_wq); init_waitqueue_head(&ca->hif_opdone_wq); From 4d5a28efda3ce12529e4b90832184f62c7a50848 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:15:38 -0300 Subject: [PATCH 1072/1626] V4L/DVB (13750): [Mantis] GPIO_CONTROL: Cache a given GPIO Bit Setup for a given event Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_common.h | 2 +- drivers/media/dvb/mantis/mantis_core.c | 11 +++++------ 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index 0aa4001dea9c..75f07736e001 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -137,7 +137,7 @@ struct mantis_pci { u32 sub_device_id; /* A12 A13 A14 */ - int gpio_status; + u32 gpio_status; struct mantis_ca *mantis_ca; }; diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c index b94d0515de4b..3fd3b0801cf4 100644 --- a/drivers/media/dvb/mantis/mantis_core.c +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -185,16 +185,15 @@ int mantis_core_exit(struct mantis_pci *mantis) // Turn the given bit on or off. void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value) { - u32 currVal, newVal; - - currVal = mmread(MANTIS_GPIF_ADDR); + u32 cur; + cur = mmread(MANTIS_GPIF_ADDR); if (value) - newVal = currVal | (1 << bitpos); + mantis->gpio_status = cur | (1 << bitpos); else - newVal = currVal & (~(1 << bitpos)); + mantis->gpio_status = cur & (~(1 << bitpos)); - mmwrite(newVal, MANTIS_GPIF_ADDR); + mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR); mmwrite(0x00, MANTIS_GPIF_DOUT); udelay(100); } From b2d8f5eafd31cd7bc722dc93057d8c5fd5b688ab Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:16:24 -0300 Subject: [PATCH 1073/1626] V4L/DVB (13751): [Mantis] GPIO_CONTROL: Do not toggle GPIO CW's on HIF operations Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_common.h | 2 ++ drivers/media/dvb/mantis/mantis_hif.c | 9 +++++---- 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index 75f07736e001..49f2f118b498 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -142,6 +142,8 @@ struct mantis_pci { struct mantis_ca *mantis_ca; }; +#define MANTIS_HIF_STATUS (mantis->gpio_status << 12) + extern unsigned int verbose; extern unsigned int devs; extern unsigned int i2c; diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index d18fe4152449..96611b67cb4b 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -56,6 +56,7 @@ static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca) return rc; } + int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) { struct mantis_pci *mantis = ca->ca_priv; @@ -67,7 +68,7 @@ int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; hif_addr |= addr; - mmwrite(hif_addr, MANTIS_GPIF_BRADDR); + mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_BRADDR); mmwrite(count, MANTIS_GPIF_BRBYTES); udelay(20); @@ -100,7 +101,7 @@ int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) mmwrite(slot->slave_cfg, MANTIS_GPIF_CFGSLA); /* Slot0 alone for now */ - mmwrite(hif_addr, MANTIS_GPIF_ADDR); + mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_ADDR); mmwrite(data, MANTIS_GPIF_DOUT); ca->hif_job_queue = MANTIS_HIF_MEMWR; @@ -124,7 +125,7 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) hif_addr |= MANTIS_GPIF_PCMCIAIOM; hif_addr |= addr; - mmwrite(hif_addr, MANTIS_GPIF_ADDR); + mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_ADDR); ca->hif_job_queue = MANTIS_HIF_IOMRD; if (mantis_hif_sbuf_opdone_wait(ca) != 0) { @@ -152,7 +153,7 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) hif_addr |= MANTIS_GPIF_PCMCIAIOM; hif_addr |= addr; - mmwrite(hif_addr, MANTIS_GPIF_ADDR); + mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_ADDR); mmwrite(data, MANTIS_GPIF_DOUT); ca->hif_job_queue = MANTIS_HIF_IOMWR; From b619f9f8a111be3f6ec8ec2671eb93c66a673b90 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:17:14 -0300 Subject: [PATCH 1074/1626] V4L/DVB (13752): [Mantis CA] CAM_CONTROL: All CAM control operations now handled by the worker thread Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_pci.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c index 6eecd54a4457..4873fa9586e0 100644 --- a/drivers/media/dvb/mantis/mantis_pci.c +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -183,20 +183,7 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, mantis->subsystem_device = pdev->subsystem_device; init_waitqueue_head(&mantis->i2c_wq); - // CAM bypass - //mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_IRQ1, MANTIS_INT_MASK); - dprintk(verbose, MANTIS_INFO, 0, "\ngpif status: %04x irqcfg: %04x\n", mmread(0x9c), mmread(0x98)); - if ((mmread(0x9c) & 0x200) != 0) { //CAM inserted - msleep_interruptible(1); - if ((mmread(0x9c) & 0x200) != 0) - mmwrite(((mmread(0x98) | 0x01) & ~0x02), 0x98); - else - mmwrite(((mmread(0x98) | 0x02) & ~0x01), 0x98); - - } else { - mmwrite(((mmread(0x98) | 0x02) & ~0x01), 0x98); - } - mantis_set_direction(mantis, 0); + mantis_set_direction(mantis, 0); /* CAM bypass */ if (!latency) pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 32); From fb6de9c5fe13fd5cd866c49204e6bd91d73f83b0 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:17:46 -0300 Subject: [PATCH 1075/1626] V4L/DVB (13753): [Mantis CA] SLOT_CONTROL: Implement Slot RESET Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_ca.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index f6d70cb3f6fe..a30eb844ffdb 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -80,6 +80,11 @@ static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot) struct mantis_pci *mantis = ca->ca_priv; dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot); + udelay(500); /* Wait.. */ + mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */ + udelay(500); + mmwrite(0x00, MANTIS_PCMCIA_RESET); /* Trailing edge deassert */ + msleep(1000); return 0; } From 990f8d1e161429ee1a0e9708f7989543e4648f73 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:18:27 -0300 Subject: [PATCH 1076/1626] V4L/DVB (13754): [Mantis] CAM_CONTROL: Implement TS control Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_ca.c | 1 + drivers/media/dvb/mantis/mantis_common.h | 2 ++ drivers/media/dvb/mantis/mantis_core.h | 4 ---- 3 files changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index a30eb844ffdb..b9d808bf7109 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -105,6 +105,7 @@ static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot) struct mantis_pci *mantis = ca->ca_priv; dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): TS control", slot); + mantis_set_direction(mantis, 1); /* Enable TS through CAM */ return 0; } diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index 49f2f118b498..ac3eefec0a7b 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -153,6 +153,8 @@ extern int mantis_dvb_exit(struct mantis_pci *mantis); extern void mantis_dma_xfer(unsigned long data); extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value); +extern void mantis_set_direction(struct mantis_pci *mantis, int direction); + extern int mantis_ca_init(struct mantis_pci *mantis); extern void mantis_ca_exit(struct mantis_pci *mantis); diff --git a/drivers/media/dvb/mantis/mantis_core.h b/drivers/media/dvb/mantis/mantis_core.h index 31b2a756d99e..a80939409935 100644 --- a/drivers/media/dvb/mantis/mantis_core.h +++ b/drivers/media/dvb/mantis/mantis_core.h @@ -53,9 +53,5 @@ extern int mantis_i2c_init(struct mantis_pci *mantis); extern int mantis_i2c_exit(struct mantis_pci *mantis); extern int mantis_core_init(struct mantis_pci *mantis); extern int mantis_core_exit(struct mantis_pci *mantis); -//extern void mantis_fe_powerup(struct mantis_pci *mantis); -//extern void mantis_fe_powerdown(struct mantis_pci *mantis); -//extern void mantis_fe_reset(struct dvb_frontend *fe); -extern void mantis_set_direction(struct mantis_pci *mantis, int direction); #endif //__MANTIS_CORE_H From f9ce1c3f32aa472c667c4d43d01c42922fb356ca Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:18:53 -0300 Subject: [PATCH 1077/1626] V4L/DVB (13755): [Mantis CA] CAM_CONTROL: Use appropriate flags Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_ca.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index b9d808bf7109..2c49f6bae499 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -138,6 +138,9 @@ int mantis_ca_init(struct mantis_pci *mantis) ca->ca_priv = mantis; mantis->mantis_ca = ca; + ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE | + DVB_CA_EN50221_FLAG_IRQ_FR | + DVB_CA_EN50221_FLAG_IRQ_DA; /* register CA interface */ ca->en50221.owner = THIS_MODULE; From 05691cdbf479282e3d3c2e3386cb865cbf611e3a Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:19:26 -0300 Subject: [PATCH 1078/1626] V4L/DVB (13756): [Mantis CA] CAM_CONTROL: Use CAMCHANGE_IRQ events Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_evm.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index dbcdca3a8f03..79c3c625e2e8 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -39,12 +39,18 @@ static void mantis_hifevm_work(struct work_struct *work) dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num); mmwrite(0xdada0000, MANTIS_CARD_RESET); mantis_event_cam_plugin(ca); + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_INSERTED); } } else { if (gpif_stat & MANTIS_CARD_PLUGOUT) { dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num); mmwrite(0xdada0000, MANTIS_CARD_RESET); mantis_event_cam_unplug(ca); + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_REMOVED); } } From bb928a7a21273f67455912f0935ff943ddb35d0c Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:20:14 -0300 Subject: [PATCH 1079/1626] V4L/DVB (13757): [Mantis CA] CAM_CONTROL: Use FRDA_IRQ Events Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_evm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index 79c3c625e2e8..ee049555a3cb 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -69,8 +69,7 @@ static void mantis_hifevm_work(struct work_struct *work) if (gpif_stat & MANTIS_GPIF_BRRDY) { dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num); ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL; - if (ca->hif_job_queue & MANTIS_HIF_MEMRD) - wake_up(&ca->hif_brrdyw_wq); + dvb_ca_en50221_frda_irq(&ca->en50221, 0); } if (gpif_stat & MANTIS_GPIF_WRACK) dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Slave Write ACK", mantis->num); From 2ec9b00bd0386b71c8a84a3990a13ea9656fe8dd Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:20:44 -0300 Subject: [PATCH 1080/1626] V4L/DVB (13758): [Mantis CA] CAM_CONTROL: Use CAMREADY_IRQ event Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_ca.c | 1 + drivers/media/dvb/mantis/mantis_evm.c | 5 +---- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index 2c49f6bae499..abd8855cabf3 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -85,6 +85,7 @@ static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot) udelay(500); mmwrite(0x00, MANTIS_PCMCIA_RESET); /* Trailing edge deassert */ msleep(1000); + dvb_ca_en50221_camready_irq(&ca->en50221, 0); return 0; } diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index ee049555a3cb..469571508d13 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -82,10 +82,7 @@ static void mantis_hifevm_work(struct work_struct *work) if (gpif_stat & MANTIS_SBUF_OPDONE) { dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num); - if (ca->hif_job_queue) { - wake_up(&ca->hif_opdone_wq); - ca->hif_event = MANTIS_SBUF_OPDONE; - } + } } From 9c8679554db8cf39ccec5a90cfaa12b164585556 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:21:05 -0300 Subject: [PATCH 1081/1626] V4L/DVB (13759): [Mantis] HIF I/O: Use the LSB octet only Thanks to Abylai Ospan for pointing this out. Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_hif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 96611b67cb4b..1ccd86969534 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -139,7 +139,7 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) hif_addr |= MANTIS_GPIF_PCMCIAREG; mmwrite(hif_addr, MANTIS_GPIF_ADDR); - return data; + return (u8) data; } int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) From 86c75c5c2b9318f4b3218615ada18badabd3f166 Mon Sep 17 00:00:00 2001 From: Sigmund Augdal Date: Fri, 4 Dec 2009 05:21:27 -0300 Subject: [PATCH 1082/1626] V4L/DVB (13760): [Mantis CA] CA_MODULE: Look for module status on driver load Signed-off-by: Sigmund Augdal Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_pcmcia.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_pcmcia.c b/drivers/media/dvb/mantis/mantis_pcmcia.c index 47cc720d35dd..59f1a06f0d95 100644 --- a/drivers/media/dvb/mantis/mantis_pcmcia.c +++ b/drivers/media/dvb/mantis/mantis_pcmcia.c @@ -83,6 +83,9 @@ int mantis_pcmcia_init(struct mantis_ca *ca) dprintk(verbose, MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num); mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG); ca->slot_state = MODULE_INSERTED; + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_INSERTED); } else { dprintk(verbose, MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num); mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG); From cc0e4aacaf4c3660fa759ce1299377baaf9efd8b Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:21:51 -0300 Subject: [PATCH 1083/1626] V4L/DVB (13761): [Mantis] HIF I/O: Temporary workaround, use SBUF_OPDONE flag instead Dnumgis got hit with this bug, using a temporary workaround for the time being rather than digging deep at this point. Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_evm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index 469571508d13..532bcfff5ae6 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -68,8 +68,6 @@ static void mantis_hifevm_work(struct work_struct *work) if (gpif_stat & MANTIS_GPIF_BRRDY) { dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num); - ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL; - dvb_ca_en50221_frda_irq(&ca->en50221, 0); } if (gpif_stat & MANTIS_GPIF_WRACK) dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Slave Write ACK", mantis->num); @@ -82,7 +80,8 @@ static void mantis_hifevm_work(struct work_struct *work) if (gpif_stat & MANTIS_SBUF_OPDONE) { dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num); - + ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL; + dvb_ca_en50221_frda_irq(&ca->en50221, 0); } } From 88a6fa9dfec0a585409acbb49a7f86a933b35d2b Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:22:33 -0300 Subject: [PATCH 1084/1626] V4L/DVB (13762): [Mantis CA] CA_MODULE: Look for the module status on driver unload as well Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_pcmcia.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_pcmcia.c b/drivers/media/dvb/mantis/mantis_pcmcia.c index 59f1a06f0d95..4156a0820886 100644 --- a/drivers/media/dvb/mantis/mantis_pcmcia.c +++ b/drivers/media/dvb/mantis/mantis_pcmcia.c @@ -90,6 +90,9 @@ int mantis_pcmcia_init(struct mantis_ca *ca) dprintk(verbose, MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num); mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG); ca->slot_state = MODULE_XTRACTED; + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_REMOVED); } return 0; From 8e0d58ecee2abc12f298862b7f9a90d1593e8006 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:22:57 -0300 Subject: [PATCH 1085/1626] V4L/DVB (13763): [Mantis] HIF I/O: trim delays a bit appropriately Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_hif.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 1ccd86969534..880b99634c29 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -133,11 +133,11 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); return -EREMOTEIO; } - udelay(50); ca->hif_job_queue &= ~MANTIS_HIF_IOMRD; data = mmread(MANTIS_GPIF_DIN); hif_addr |= MANTIS_GPIF_PCMCIAREG; mmwrite(hif_addr, MANTIS_GPIF_ADDR); + udelay(50); return (u8) data; } @@ -162,10 +162,10 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); return -EREMOTEIO; } - udelay(50); ca->hif_job_queue &= ~MANTIS_HIF_IOMWR; hif_addr |= MANTIS_GPIF_PCMCIAREG; mmwrite(hif_addr, MANTIS_GPIF_ADDR); + udelay(50); return 0; } From 5e2a0c99019bbc78d6fb00caf7a79f03df020b3c Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:23:17 -0300 Subject: [PATCH 1086/1626] V4L/DVB (13764): [Mantis CA] SLOT: Add some debug status Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_ca.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index abd8855cabf3..b79a89276e34 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -118,8 +118,12 @@ static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot); - if (ca->slot_state == MODULE_INSERTED) + if (ca->slot_state == MODULE_INSERTED) { + dprintk(verbose, MANTIS_DEBUG, 1, "CA Module present and ready"); return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; + } else { + dprintk(verbose, MANTIS_DEBUG, 1, "CA Module not present or not ready"); + } return 0; } From 8b9c385f765bcc7fc5ae802830ffcb4b6ca6bc9c Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:23:38 -0300 Subject: [PATCH 1087/1626] V4L/DVB (13765): [Mantis] HIF I/O: Add some debug statements Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_hif.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 880b99634c29..c2cecc3d7b19 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -51,6 +51,7 @@ static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca) dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num); rc = -EREMOTEIO; } + dprintk(verbose, MANTIS_DEBUG, 1, "Smart Buffer Operation complete"); ca->hif_event &= ~MANTIS_SBUF_OPDONE; udelay(5); return rc; @@ -83,7 +84,7 @@ int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) return -EREMOTEIO; } data = mmread(MANTIS_GPIF_DIN); - + dprintk(verbose, MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data); return (data >> 24) & 0xff; } @@ -111,6 +112,8 @@ int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) return -EREMOTEIO; } ca->hif_job_queue &= ~MANTIS_HIF_MEMWR; + dprintk(verbose, MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr); + return 0; } @@ -137,6 +140,7 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) data = mmread(MANTIS_GPIF_DIN); hif_addr |= MANTIS_GPIF_PCMCIAREG; mmwrite(hif_addr, MANTIS_GPIF_ADDR); + dprintk(verbose, MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data); udelay(50); return (u8) data; @@ -165,6 +169,7 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) ca->hif_job_queue &= ~MANTIS_HIF_IOMWR; hif_addr |= MANTIS_GPIF_PCMCIAREG; mmwrite(hif_addr, MANTIS_GPIF_ADDR); + dprintk(verbose, MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr); udelay(50); return 0; From b29453aca0eeecba52a76c3d67b1a52c3ca6e656 Mon Sep 17 00:00:00 2001 From: Sigmund Augdal Date: Fri, 4 Dec 2009 05:24:01 -0300 Subject: [PATCH 1088/1626] V4L/DVB (13766): [Mantis] Bug: Fix wrong exit condition Signed-off-by: Sigmund Augdal Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_evm.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index 532bcfff5ae6..214ae5ee31ec 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -31,8 +31,6 @@ static void mantis_hifevm_work(struct work_struct *work) gpif_stat = mmread(MANTIS_GPIF_STATUS); gpif_mask = mmread(MANTIS_GPIF_IRQCFG); - if (!((gpif_stat & 0xff) & (gpif_mask & 0xff))) - return; if (gpif_stat & MANTIS_GPIF_DETSTAT) { if (gpif_stat & MANTIS_CARD_PLUGIN) { From 18b6de42d77e7762be929a4a858c359de352e1e2 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:24:47 -0300 Subject: [PATCH 1089/1626] V4L/DVB (13767): [Mantis/VP-1041] Bug: Add in missing Master clock settings Thanks to Ershov and Igor for pointing it out. Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_vp1041.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c index 7dee1af0d649..8eb1afdab113 100644 --- a/drivers/media/dvb/mantis/mantis_vp1041.c +++ b/drivers/media/dvb/mantis/mantis_vp1041.c @@ -267,6 +267,9 @@ struct stb0899_config vp1041_config = { .xtal_freq = 27000000, .inversion = IQ_SWAP_ON, /* 1 */ + .lo_clk = 76500000, + .hi_clk = 99000000, + .esno_ave = STB0899_DVBS2_ESNO_AVE, .esno_quant = STB0899_DVBS2_ESNO_QUANT, .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, From adcc9dd57e814d5ac3928f92f431fbe4808e936f Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:25:18 -0300 Subject: [PATCH 1090/1626] V4L/DVB (13768): [Mantis] Enable WRACK Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_evm.c | 10 +++++++++- drivers/media/dvb/mantis/mantis_hif.c | 1 + 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index 214ae5ee31ec..000cf396a2c7 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -27,11 +27,19 @@ static void mantis_hifevm_work(struct work_struct *work) struct mantis_ca *ca = container_of(work, struct mantis_ca, hif_evm_work); struct mantis_pci *mantis = ca->ca_priv; - u32 gpif_stat, gpif_mask; + u32 gpif_stat, gpif_mask, rst_mask, rst_stat; + + rst_mask = MANTIS_GPIF_WRACK | + MANTIS_GPIF_OTHERR | + MANTIS_SBUF_WSTO | + MANTIS_GPIF_EXTIRQ; gpif_stat = mmread(MANTIS_GPIF_STATUS); gpif_mask = mmread(MANTIS_GPIF_IRQCFG); + rst_stat = gpif_stat & rst_mask; + mmwrite(rst_stat, MANTIS_GPIF_STATUS); + if (gpif_stat & MANTIS_GPIF_DETSTAT) { if (gpif_stat & MANTIS_CARD_PLUGIN) { dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num); diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index c2cecc3d7b19..2f1a6cb943db 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -188,6 +188,7 @@ int mantis_hif_init(struct mantis_ca *ca) irqcfg = mmread(MANTIS_GPIF_IRQCFG); irqcfg |= MANTIS_MASK_BRRDY; + irqcfg |= MANTIS_MASK_WRACK; mmwrite(irqcfg, MANTIS_GPIF_IRQCFG); return 0; From 9e49e8d913209e7221f761193f18a91d130b9e2d Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:25:45 -0300 Subject: [PATCH 1091/1626] V4L/DVB (13769): [Mantis] Smart Buffer Burst Read Ready cannot flag FR/DA Irq Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_evm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index 000cf396a2c7..1594bb85a20f 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -72,9 +72,9 @@ static void mantis_hifevm_work(struct work_struct *work) if (gpif_stat & MANTIS_SBUF_OVFLW) dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num); - if (gpif_stat & MANTIS_GPIF_BRRDY) { + if (gpif_stat & MANTIS_GPIF_BRRDY) dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num); - } + if (gpif_stat & MANTIS_GPIF_WRACK) dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Slave Write ACK", mantis->num); From f668c7292bda7f64400eaa8d45c3a785eecab990 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:26:18 -0300 Subject: [PATCH 1092/1626] V4L/DVB (13770): [Mantis] Bug Do not trigger FR/DA IRQ from SBUF OPDONE Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_evm.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index 1594bb85a20f..d603601c09b1 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -87,7 +87,6 @@ static void mantis_hifevm_work(struct work_struct *work) if (gpif_stat & MANTIS_SBUF_OPDONE) { dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num); ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL; - dvb_ca_en50221_frda_irq(&ca->en50221, 0); } } From 17b77fc2d404910ca691661038ceb4c02d912d16 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:26:46 -0300 Subject: [PATCH 1093/1626] V4L/DVB (13771): [Mantis] Reset Flags at the earliest possible Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_common.h | 2 ++ drivers/media/dvb/mantis/mantis_evm.c | 18 +++++------------- drivers/media/dvb/mantis/mantis_pci.c | 12 ++++++++++++ 3 files changed, 19 insertions(+), 13 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index ac3eefec0a7b..27ecfdb6e6f7 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -139,6 +139,8 @@ struct mantis_pci { /* A12 A13 A14 */ u32 gpio_status; + u32 gpif_status; + struct mantis_ca *mantis_ca; }; diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index d603601c09b1..4c4c1448ddd4 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -27,19 +27,11 @@ static void mantis_hifevm_work(struct work_struct *work) struct mantis_ca *ca = container_of(work, struct mantis_ca, hif_evm_work); struct mantis_pci *mantis = ca->ca_priv; - u32 gpif_stat, gpif_mask, rst_mask, rst_stat; - - rst_mask = MANTIS_GPIF_WRACK | - MANTIS_GPIF_OTHERR | - MANTIS_SBUF_WSTO | - MANTIS_GPIF_EXTIRQ; + u32 gpif_stat, gpif_mask; gpif_stat = mmread(MANTIS_GPIF_STATUS); gpif_mask = mmread(MANTIS_GPIF_IRQCFG); - rst_stat = gpif_stat & rst_mask; - mmwrite(rst_stat, MANTIS_GPIF_STATUS); - if (gpif_stat & MANTIS_GPIF_DETSTAT) { if (gpif_stat & MANTIS_CARD_PLUGIN) { dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num); @@ -60,13 +52,13 @@ static void mantis_hifevm_work(struct work_struct *work) } } - if (gpif_stat & MANTIS_GPIF_EXTIRQ) + if (mantis->gpif_status & MANTIS_GPIF_EXTIRQ) dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num); - if (gpif_stat & MANTIS_SBUF_WSTO) + if (mantis->gpif_status & MANTIS_SBUF_WSTO) dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num); - if (gpif_stat & MANTIS_GPIF_OTHERR) + if (mantis->gpif_status & MANTIS_GPIF_OTHERR) dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num); if (gpif_stat & MANTIS_SBUF_OVFLW) @@ -75,7 +67,7 @@ static void mantis_hifevm_work(struct work_struct *work) if (gpif_stat & MANTIS_GPIF_BRRDY) dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num); - if (gpif_stat & MANTIS_GPIF_WRACK) + if (mantis->gpif_status & MANTIS_GPIF_WRACK) dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Slave Write ACK", mantis->num); if (gpif_stat & MANTIS_GPIF_INTSTAT) diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c index 4873fa9586e0..f57e2a43b9ed 100644 --- a/drivers/media/dvb/mantis/mantis_pci.c +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -53,6 +53,8 @@ MODULE_DEVICE_TABLE(pci, mantis_pci_table); static irqreturn_t mantis_pci_irq(int irq, void *dev_id) { u32 stat = 0, mask = 0, lstat = 0, mstat = 0; + u32 rst_stat = 0, rst_mask = 0; + struct mantis_pci *mantis; struct mantis_ca *ca; @@ -69,6 +71,15 @@ static irqreturn_t mantis_pci_irq(int irq, void *dev_id) if (!(stat & mask)) return IRQ_NONE; + rst_mask = MANTIS_GPIF_WRACK | + MANTIS_GPIF_OTHERR | + MANTIS_SBUF_WSTO | + MANTIS_GPIF_EXTIRQ; + + rst_stat = mmread(MANTIS_GPIF_STATUS); + rst_stat &= rst_mask; + mmwrite(rst_stat, MANTIS_GPIF_STATUS); + mantis->mantis_int_stat = stat; mantis->mantis_int_mask = mask; dprintk(verbose, MANTIS_DEBUG, 0, "=== Interrupts[%04x/%04x]= [", stat, mask); @@ -77,6 +88,7 @@ static irqreturn_t mantis_pci_irq(int irq, void *dev_id) } if (stat & MANTIS_INT_IRQ0) { dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-0 *"); + mantis->gpif_status = rst_stat; schedule_work(&ca->hif_evm_work); } if (stat & MANTIS_INT_IRQ1) { From 578413228ae72a09b29bf29e879e5b919ded0ac4 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:27:26 -0300 Subject: [PATCH 1094/1626] V4L/DVB (13772): [Mantis] Do not enable Common Memory Access Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_hif.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 2f1a6cb943db..151de2d687e2 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -138,8 +138,6 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) } ca->hif_job_queue &= ~MANTIS_HIF_IOMRD; data = mmread(MANTIS_GPIF_DIN); - hif_addr |= MANTIS_GPIF_PCMCIAREG; - mmwrite(hif_addr, MANTIS_GPIF_ADDR); dprintk(verbose, MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data); udelay(50); @@ -167,8 +165,6 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) return -EREMOTEIO; } ca->hif_job_queue &= ~MANTIS_HIF_IOMWR; - hif_addr |= MANTIS_GPIF_PCMCIAREG; - mmwrite(hif_addr, MANTIS_GPIF_ADDR); dprintk(verbose, MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr); udelay(50); From c90d345fd7d66899d743611a47163f9904df90bc Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:27:53 -0300 Subject: [PATCH 1095/1626] V4L/DVB (13773): [Mantis] Enable all interrupts Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_hif.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 151de2d687e2..fa4bb6dc3241 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -182,9 +182,14 @@ int mantis_hif_init(struct mantis_ca *ca) init_waitqueue_head(&ca->hif_data_wq); init_waitqueue_head(&ca->hif_opdone_wq); - irqcfg = mmread(MANTIS_GPIF_IRQCFG); - irqcfg |= MANTIS_MASK_BRRDY; - irqcfg |= MANTIS_MASK_WRACK; + irqcfg = mmread(MANTIS_GPIF_IRQCFG); + irqcfg = MANTIS_MASK_BRRDY | + MANTIS_MASK_WRACK | + MANTIS_MASK_EXTIRQ | + MANTIS_MASK_WSTO | + MANTIS_MASK_OTHERR | + MANTIS_MASK_OVFLW; + mmwrite(irqcfg, MANTIS_GPIF_IRQCFG); return 0; From c02e15150c85619f22a98675124503ed93bf1914 Mon Sep 17 00:00:00 2001 From: Sigmund Augdal Date: Fri, 4 Dec 2009 05:28:24 -0300 Subject: [PATCH 1096/1626] V4L/DVB (13774): [Mantis] Remove redundant wait for Burst Reads, wakeup the HIF event Signed-off-by: Sigmund Augdal Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_evm.c | 2 ++ drivers/media/dvb/mantis/mantis_hif.c | 4 ---- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index 4c4c1448ddd4..008e2c28c06b 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -79,6 +79,8 @@ static void mantis_hifevm_work(struct work_struct *work) if (gpif_stat & MANTIS_SBUF_OPDONE) { dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num); ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL; + ca->hif_event = MANTIS_SBUF_OPDONE; + wake_up(&ca->hif_opdone_wq); } } diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index fa4bb6dc3241..6c51d1780015 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -75,10 +75,6 @@ int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) udelay(20); mmwrite(hif_addr, MANTIS_GPIF_ADDR); - if (mantis_hif_data_available(ca) != 0) { - dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer burst read failed", mantis->num); - return -EREMOTEIO; - } if (mantis_hif_sbuf_opdone_wait(ca) != 0) { dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num); return -EREMOTEIO; From b9fd5877463605b91743552b4989666792bf4fbc Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:29:03 -0300 Subject: [PATCH 1097/1626] V4L/DVB (13775): [Mantis] Remove unnecessary job queues Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_hif.c | 10 ---------- drivers/media/dvb/mantis/mantis_link.h | 1 - 2 files changed, 11 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 6c51d1780015..621dce3eb5d6 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -97,17 +97,13 @@ int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) hif_addr |= addr; mmwrite(slot->slave_cfg, MANTIS_GPIF_CFGSLA); /* Slot0 alone for now */ - mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_ADDR); mmwrite(data, MANTIS_GPIF_DOUT); - ca->hif_job_queue = MANTIS_HIF_MEMWR; if (mantis_hif_sbuf_opdone_wait(ca) != 0) { - ca->hif_job_queue &= ~MANTIS_HIF_MEMWR; dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); return -EREMOTEIO; } - ca->hif_job_queue &= ~MANTIS_HIF_MEMWR; dprintk(verbose, MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr); return 0; @@ -125,14 +121,11 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) hif_addr |= addr; mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_ADDR); - ca->hif_job_queue = MANTIS_HIF_IOMRD; if (mantis_hif_sbuf_opdone_wait(ca) != 0) { - ca->hif_job_queue &= ~MANTIS_HIF_IOMRD; dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); return -EREMOTEIO; } - ca->hif_job_queue &= ~MANTIS_HIF_IOMRD; data = mmread(MANTIS_GPIF_DIN); dprintk(verbose, MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data); udelay(50); @@ -154,13 +147,10 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_ADDR); mmwrite(data, MANTIS_GPIF_DOUT); - ca->hif_job_queue = MANTIS_HIF_IOMWR; if (mantis_hif_sbuf_opdone_wait(ca) != 0) { - ca->hif_job_queue &= ~MANTIS_HIF_IOMWR; dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); return -EREMOTEIO; } - ca->hif_job_queue &= ~MANTIS_HIF_IOMWR; dprintk(verbose, MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr); udelay(50); diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h index 23ff2d6aadbc..a85f50215266 100644 --- a/drivers/media/dvb/mantis/mantis_link.h +++ b/drivers/media/dvb/mantis/mantis_link.h @@ -51,7 +51,6 @@ struct mantis_ca { wait_queue_head_t hif_opdone_wq; wait_queue_head_t hif_brrdyw_wq; wait_queue_head_t hif_data_wq; - u32 hif_job_queue; enum mantis_sbuf_status sbuf_status; From ac8f04d2723b3de7c36430d67401ce89c858e117 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:29:25 -0300 Subject: [PATCH 1098/1626] V4L/DVB (13776): [Mantis] Use a simple timeout instead, interruptible timeouts sleep unnecessarily too long Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_hif.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 621dce3eb5d6..a2359f7e1465 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -44,9 +44,9 @@ static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca) struct mantis_pci *mantis = ca->ca_priv; int rc = 0; - if (wait_event_interruptible_timeout(ca->hif_opdone_wq, - ca->hif_event & MANTIS_SBUF_OPDONE, - msecs_to_jiffies(500)) == -ERESTARTSYS) { + if (wait_event_timeout(ca->hif_opdone_wq, + ca->hif_event & MANTIS_SBUF_OPDONE, + msecs_to_jiffies(500)) == -ERESTARTSYS) { dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num); rc = -EREMOTEIO; From e0e099a708043a2341d8987014ce4ba98a4dbd30 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:29:48 -0300 Subject: [PATCH 1099/1626] V4L/DVB (13777): [Mantis] Use a Write wait queue for Write events Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_hif.c | 34 ++++++++++++++++++++++++-- drivers/media/dvb/mantis/mantis_link.h | 1 + 2 files changed, 33 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index a2359f7e1465..dc50fac0d155 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -57,6 +57,35 @@ static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca) return rc; } +static int mantis_hif_write_wait(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 opdone = 0, timeout = 0; + int rc = 0; + + if (wait_event_timeout(ca->hif_write_wq, + mantis->gpif_status & MANTIS_GPIF_WRACK, + msecs_to_jiffies(500)) == -ERESTARTSYS) { + + dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num); + rc = -EREMOTEIO; + } + dprintk(verbose, MANTIS_DEBUG, 1, "Write Acknowledged"); + mantis->gpif_status &= ~MANTIS_GPIF_WRACK; + while (!opdone) { + opdone = (mmread(MANTIS_GPIF_STATUS) & MANTIS_SBUF_OPDONE); + udelay(500); + timeout++; + if (timeout > 100) { + dprintk(verbose, MANTIS_ERROR, 1, "Adater(%d) Slot(0): Write operation timed out!", mantis->num); + rc = -ETIMEDOUT; + break; + } + } + dprintk(verbose, MANTIS_DEBUG, 1, "HIF Write success"); + return rc; +} + int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) { @@ -100,7 +129,7 @@ int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_ADDR); mmwrite(data, MANTIS_GPIF_DOUT); - if (mantis_hif_sbuf_opdone_wait(ca) != 0) { + if (mantis_hif_write_wait(ca) != 0) { dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); return -EREMOTEIO; } @@ -147,7 +176,7 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_ADDR); mmwrite(data, MANTIS_GPIF_DOUT); - if (mantis_hif_sbuf_opdone_wait(ca) != 0) { + if (mantis_hif_write_wait(ca) != 0) { dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); return -EREMOTEIO; } @@ -167,6 +196,7 @@ int mantis_hif_init(struct mantis_ca *ca) dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num); init_waitqueue_head(&ca->hif_data_wq); init_waitqueue_head(&ca->hif_opdone_wq); + init_waitqueue_head(&ca->hif_write_wq); irqcfg = mmread(MANTIS_GPIF_IRQCFG); irqcfg = MANTIS_MASK_BRRDY | diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h index a85f50215266..599ff1b57e48 100644 --- a/drivers/media/dvb/mantis/mantis_link.h +++ b/drivers/media/dvb/mantis/mantis_link.h @@ -51,6 +51,7 @@ struct mantis_ca { wait_queue_head_t hif_opdone_wq; wait_queue_head_t hif_brrdyw_wq; wait_queue_head_t hif_data_wq; + wait_queue_head_t hif_write_wq; /* HIF Write op */ enum mantis_sbuf_status sbuf_status; From 4d019faf48ff03b6ff3463d8e5da54d61f153623 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:30:11 -0300 Subject: [PATCH 1100/1626] V4L/DVB (13778): [Mantis] Wr ACK is already handled in the fast path, do not use the event manager to handle the fast events Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_evm.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index 008e2c28c06b..9be55f7942d4 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -67,9 +67,6 @@ static void mantis_hifevm_work(struct work_struct *work) if (gpif_stat & MANTIS_GPIF_BRRDY) dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num); - if (mantis->gpif_status & MANTIS_GPIF_WRACK) - dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Slave Write ACK", mantis->num); - if (gpif_stat & MANTIS_GPIF_INTSTAT) dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num); From 25e9eba42ce11a05933068cf6a42dd8d4ed5edb8 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:30:33 -0300 Subject: [PATCH 1101/1626] V4L/DVB (13779): [Mantis] Missing wakeup for write queue Thanks to Sigmund for pointing it out Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c index f57e2a43b9ed..a068ffb32534 100644 --- a/drivers/media/dvb/mantis/mantis_pci.c +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -89,6 +89,7 @@ static irqreturn_t mantis_pci_irq(int irq, void *dev_id) if (stat & MANTIS_INT_IRQ0) { dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-0 *"); mantis->gpif_status = rst_stat; + wake_up(&ca->hif_write_wq); schedule_work(&ca->hif_evm_work); } if (stat & MANTIS_INT_IRQ1) { From c63e507346c042af7fe26d49bbbdce9898ea3eea Mon Sep 17 00:00:00 2001 From: Sigmund Augdal Date: Fri, 4 Dec 2009 05:30:59 -0300 Subject: [PATCH 1102/1626] V4L/DVB (13780): [Mantis] HIF I/O: Enable Interrupts for Read Signed-off-by: Sigmund Augdal Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_hif.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index dc50fac0d155..323d1fb0a55e 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -149,6 +149,11 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) hif_addr |= MANTIS_GPIF_PCMCIAIOM; hif_addr |= addr; + mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_BRADDR); + mmwrite(1, MANTIS_GPIF_BRBYTES); + + udelay(20); + mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_ADDR); if (mantis_hif_sbuf_opdone_wait(ca) != 0) { From b29f6ac248e49d8425aa91afb1b53d1f6d47ebe3 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:31:21 -0300 Subject: [PATCH 1103/1626] V4L/DVB (13781): [Mantis CA] Bug: Fix wrong usage of HIFRDWRN Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_hif.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 323d1fb0a55e..3368253aea6c 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -53,7 +53,6 @@ static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca) } dprintk(verbose, MANTIS_DEBUG, 1, "Smart Buffer Operation complete"); ca->hif_event &= ~MANTIS_SBUF_OPDONE; - udelay(5); return rc; } @@ -93,17 +92,16 @@ int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) u32 hif_addr = 0, data, count = 4; dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num); - hif_addr |= MANTIS_GPIF_HIFRDWRN; hif_addr &= ~MANTIS_GPIF_PCMCIAREG; hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; + hif_addr |= MANTIS_HIF_STATUS; hif_addr |= addr; - mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_BRADDR); + mmwrite(hif_addr, MANTIS_GPIF_BRADDR); mmwrite(count, MANTIS_GPIF_BRBYTES); - udelay(20); + mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR); - mmwrite(hif_addr, MANTIS_GPIF_ADDR); if (mantis_hif_sbuf_opdone_wait(ca) != 0) { dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num); return -EREMOTEIO; @@ -123,10 +121,11 @@ int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) hif_addr &= ~MANTIS_GPIF_HIFRDWRN; hif_addr &= ~MANTIS_GPIF_PCMCIAREG; hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; - hif_addr |= addr; + hif_addr |= MANTIS_HIF_STATUS; + hif_addr |= addr; mmwrite(slot->slave_cfg, MANTIS_GPIF_CFGSLA); /* Slot0 alone for now */ - mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_ADDR); + mmwrite(hif_addr, MANTIS_GPIF_ADDR); mmwrite(data, MANTIS_GPIF_DOUT); if (mantis_hif_write_wait(ca) != 0) { @@ -145,16 +144,14 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num); hif_addr &= ~MANTIS_GPIF_PCMCIAREG; - hif_addr |= MANTIS_GPIF_HIFRDWRN; hif_addr |= MANTIS_GPIF_PCMCIAIOM; + hif_addr |= MANTIS_HIF_STATUS; hif_addr |= addr; - mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_BRADDR); + mmwrite(hif_addr, MANTIS_GPIF_BRADDR); mmwrite(1, MANTIS_GPIF_BRBYTES); - udelay(20); - - mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_ADDR); + mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR); if (mantis_hif_sbuf_opdone_wait(ca) != 0) { dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); @@ -176,9 +173,10 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) hif_addr &= ~MANTIS_GPIF_PCMCIAREG; hif_addr &= ~MANTIS_GPIF_HIFRDWRN; hif_addr |= MANTIS_GPIF_PCMCIAIOM; + hif_addr |= MANTIS_HIF_STATUS; hif_addr |= addr; - mmwrite(hif_addr | MANTIS_HIF_STATUS, MANTIS_GPIF_ADDR); + mmwrite(hif_addr, MANTIS_GPIF_ADDR); mmwrite(data, MANTIS_GPIF_DOUT); if (mantis_hif_write_wait(ca) != 0) { From e26c2b46201e5ae38111391c293cec08870b7f6d Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:31:45 -0300 Subject: [PATCH 1104/1626] V4L/DVB (13782): [Mantis] Temporarily disable FRDA irq Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_ca.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index b79a89276e34..177b04813ff0 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -143,10 +143,7 @@ int mantis_ca_init(struct mantis_pci *mantis) ca->ca_priv = mantis; mantis->mantis_ca = ca; - ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE | - DVB_CA_EN50221_FLAG_IRQ_FR | - DVB_CA_EN50221_FLAG_IRQ_DA; - + ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE; /* register CA interface */ ca->en50221.owner = THIS_MODULE; ca->en50221.read_attribute_mem = mantis_ca_read_attr_mem; From f5701b67767c6b81a035c9e2b539025f91d1e84d Mon Sep 17 00:00:00 2001 From: Marko Viitamaki Date: Fri, 4 Dec 2009 05:32:30 -0300 Subject: [PATCH 1105/1626] V4L/DVB (13783): [Mantis/Technisat Cablestar HD2] Add support for the Technisat Cablestar HD2 Signed-off-by: Marko Viitamaki Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_core.c | 1 + drivers/media/dvb/mantis/mantis_dvb.c | 1 + drivers/media/dvb/mantis/mantis_vp2040.h | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c index 3fd3b0801cf4..c3d0d53bc381 100644 --- a/drivers/media/dvb/mantis/mantis_core.c +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -121,6 +121,7 @@ static void mantis_load_config(struct mantis_pci *mantis) break; case MANTIS_VP_2040_DVB_C: // VP-2040 case TERRATEC_CINERGY_C_PCI: // VP-2040 clone + case TECHNISAT_CABLESTAR_HD2: mantis->hwconfig = &vp2040_mantis_config; break; case MANTIS_VP_3030_DVB_T: // VP-3030 diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index 3940aed8af8d..c3a35bee4686 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -275,6 +275,7 @@ int __devinit mantis_frontend_init(struct mantis_pci *mantis) break; case MANTIS_VP_2040_DVB_C: // VP-2040 case TERRATEC_CINERGY_C_PCI: + case TECHNISAT_CABLESTAR_HD2: dprintk(verbose, MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); mantis->fe = tda10023_attach(&tda10023_cu1216_config, &mantis->adapter, read_pwm(mantis)); if (mantis->fe) { diff --git a/drivers/media/dvb/mantis/mantis_vp2040.h b/drivers/media/dvb/mantis/mantis_vp2040.h index 69463cc4ccc8..645dade7543b 100644 --- a/drivers/media/dvb/mantis/mantis_vp2040.h +++ b/drivers/media/dvb/mantis/mantis_vp2040.h @@ -27,6 +27,7 @@ #define MANTIS_VP_2040_DVB_C 0x0043 #define TERRATEC_CINERGY_C_PCI 0x1178 +#define TECHNISAT_CABLESTAR_HD2 0x0002 extern struct tda1002x_config tda10023_cu1216_config; extern struct mantis_hwconfig vp2040_mantis_config; From ff63ac56705539e162d2f020a0c2a607eae37d7b Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:32:51 -0300 Subject: [PATCH 1106/1626] V4L/DVB (13784): [Mantis] Use PCI API instead of hardcoded length Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_pci.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c index a068ffb32534..d3a62b18590e 100644 --- a/drivers/media/dvb/mantis/mantis_pci.c +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -169,7 +169,10 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, goto err0; } - if ((mantis->mantis_mmio = ioremap(mantis->mantis_addr, 0x1000)) == NULL) { + mantis->mantis_mmio = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + + if (!mantis->mantis_mmio) { dprintk(verbose, MANTIS_ERROR, 1, "IO remap failed"); ret = -ENODEV; goto err1; From 13d5036ea0636e6204e1b17bd12ea25061a686be Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:33:10 -0300 Subject: [PATCH 1107/1626] V4L/DVB (13785): [Mantis] Do not disable IRQ's while being invoked Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_pci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c index d3a62b18590e..94abcee3fc72 100644 --- a/drivers/media/dvb/mantis/mantis_pci.c +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -181,8 +181,11 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, // Clear and disable all interrupts at startup // to avoid lockup situations mmwrite(0x00, MANTIS_INT_MASK); - if (request_irq(pdev->irq, mantis_pci_irq, IRQF_SHARED | IRQF_DISABLED, - DRIVER_NAME, mantis) < 0) { + if (request_irq(pdev->irq, + mantis_pci_irq, + IRQF_SHARED, + DRIVER_NAME, + mantis) < 0) { dprintk(verbose, MANTIS_ERROR, 1, "Mantis IRQ reg failed"); ret = -ENODEV; From 263645de70175d8b5a5e392a1856e99e2e1b7209 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:33:31 -0300 Subject: [PATCH 1108/1626] V4L/DVB (13786): [Mantis] Bug: HIF bits already shifted .. Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index 27ecfdb6e6f7..6b9f92b4ab39 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -144,7 +144,7 @@ struct mantis_pci { struct mantis_ca *mantis_ca; }; -#define MANTIS_HIF_STATUS (mantis->gpio_status << 12) +#define MANTIS_HIF_STATUS (mantis->gpio_status) extern unsigned int verbose; extern unsigned int devs; From 616f75e1979f5bd1f3241581c720349c2c31f6e7 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:33:56 -0300 Subject: [PATCH 1109/1626] V4L/DVB (13787): [Mantis] Fix build Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_dvb.c | 5 ++++- drivers/media/dvb/mantis/mantis_vp1033.c | 2 +- drivers/media/dvb/mantis/mantis_vp2040.c | 2 +- drivers/media/dvb/mantis/mantis_vp2040.h | 2 +- 4 files changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index c3a35bee4686..5172e8563546 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -32,6 +32,8 @@ #include "mantis_vp2040.h" #include "mantis_vp3030.h" +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + /* Tuner power supply control */ void mantis_fe_powerup(struct mantis_pci *mantis) { @@ -128,7 +130,8 @@ int __devinit mantis_dvb_init(struct mantis_pci *mantis) dprintk(verbose, MANTIS_DEBUG, 1, "dvb_register_adapter"); if (dvb_register_adapter(&mantis->dvb_adapter, "Mantis dvb adapter", THIS_MODULE, - &mantis->pdev->dev) < 0) { + &mantis->pdev->dev, + adapter_nr) < 0) { dprintk(verbose, MANTIS_ERROR, 1, "Error registering adapter"); return -ENODEV; diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c index daf02c12d299..797c4e0c7eac 100644 --- a/drivers/media/dvb/mantis/mantis_vp1033.c +++ b/drivers/media/dvb/mantis/mantis_vp1033.c @@ -74,7 +74,7 @@ struct stv0299_config lgtdqcs001f_config = { .invert = 1, // .enhanced_tuning = 0, .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_0, +// .lock_output = STV0229_LOCKOUTPUT_0, .volt13_op0_op1 = STV0299_VOLT13_OP0, .min_delay_ms = 100, .set_symbol_rate = lgtdqcs001f_set_symbol_rate, diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c index 07da73827fd2..f77be7b6491f 100644 --- a/drivers/media/dvb/mantis/mantis_vp2040.c +++ b/drivers/media/dvb/mantis/mantis_vp2040.c @@ -30,7 +30,7 @@ struct mantis_hwconfig vp2040_mantis_config = { .ts_size = MANTIS_TS_204, }; -struct tda1002x_config tda10023_cu1216_config = { +struct tda10023_config tda10023_cu1216_config = { .demod_address = 0x18 >> 1, .invert = 1, }; diff --git a/drivers/media/dvb/mantis/mantis_vp2040.h b/drivers/media/dvb/mantis/mantis_vp2040.h index 645dade7543b..c7457543d8b0 100644 --- a/drivers/media/dvb/mantis/mantis_vp2040.h +++ b/drivers/media/dvb/mantis/mantis_vp2040.h @@ -29,7 +29,7 @@ #define TERRATEC_CINERGY_C_PCI 0x1178 #define TECHNISAT_CABLESTAR_HD2 0x0002 -extern struct tda1002x_config tda10023_cu1216_config; +extern struct tda10023_config tda10023_cu1216_config; extern struct mantis_hwconfig vp2040_mantis_config; #endif //__MANTIS_VP2040_H From f684336bba673b6656cb98144130ab52dafc3240 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:34:19 -0300 Subject: [PATCH 1110/1626] V4L/DVB (13788): [Mantis CA] use a lock for the relevant CI Read/Write operations Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_hif.c | 16 ++++++++++++++++ drivers/media/dvb/mantis/mantis_link.h | 2 ++ 2 files changed, 18 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 3368253aea6c..b1e1aa0f5c12 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -92,6 +92,7 @@ int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) u32 hif_addr = 0, data, count = 4; dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num); + mutex_lock(&ca->ca_lock); hif_addr &= ~MANTIS_GPIF_PCMCIAREG; hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; hif_addr |= MANTIS_HIF_STATUS; @@ -104,9 +105,11 @@ int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) if (mantis_hif_sbuf_opdone_wait(ca) != 0) { dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); return -EREMOTEIO; } data = mmread(MANTIS_GPIF_DIN); + mutex_unlock(&ca->ca_lock); dprintk(verbose, MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data); return (data >> 24) & 0xff; } @@ -118,6 +121,7 @@ int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) u32 hif_addr = 0; dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num); + mutex_lock(&ca->ca_lock); hif_addr &= ~MANTIS_GPIF_HIFRDWRN; hif_addr &= ~MANTIS_GPIF_PCMCIAREG; hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; @@ -130,9 +134,11 @@ int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) if (mantis_hif_write_wait(ca) != 0) { dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); return -EREMOTEIO; } dprintk(verbose, MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr); + mutex_unlock(&ca->ca_lock); return 0; } @@ -143,6 +149,7 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) u32 data, hif_addr = 0; dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num); + mutex_lock(&ca->ca_lock); hif_addr &= ~MANTIS_GPIF_PCMCIAREG; hif_addr |= MANTIS_GPIF_PCMCIAIOM; hif_addr |= MANTIS_HIF_STATUS; @@ -155,11 +162,13 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) if (mantis_hif_sbuf_opdone_wait(ca) != 0) { dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); return -EREMOTEIO; } data = mmread(MANTIS_GPIF_DIN); dprintk(verbose, MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data); udelay(50); + mutex_unlock(&ca->ca_lock); return (u8) data; } @@ -170,6 +179,7 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) u32 hif_addr = 0; dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num); + mutex_lock(&ca->ca_lock); hif_addr &= ~MANTIS_GPIF_PCMCIAREG; hif_addr &= ~MANTIS_GPIF_HIFRDWRN; hif_addr |= MANTIS_GPIF_PCMCIAIOM; @@ -181,9 +191,11 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) if (mantis_hif_write_wait(ca) != 0) { dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); return -EREMOTEIO; } dprintk(verbose, MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr); + mutex_unlock(&ca->ca_lock); udelay(50); return 0; @@ -201,6 +213,7 @@ int mantis_hif_init(struct mantis_ca *ca) init_waitqueue_head(&ca->hif_opdone_wq); init_waitqueue_head(&ca->hif_write_wq); + mutex_lock(&ca->ca_lock); irqcfg = mmread(MANTIS_GPIF_IRQCFG); irqcfg = MANTIS_MASK_BRRDY | MANTIS_MASK_WRACK | @@ -210,6 +223,7 @@ int mantis_hif_init(struct mantis_ca *ca) MANTIS_MASK_OVFLW; mmwrite(irqcfg, MANTIS_GPIF_IRQCFG); + mutex_unlock(&ca->ca_lock); return 0; } @@ -220,7 +234,9 @@ void mantis_hif_exit(struct mantis_ca *ca) u32 irqcfg; dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num); + mutex_lock(&ca->ca_lock); irqcfg = mmread(MANTIS_GPIF_IRQCFG); irqcfg &= ~MANTIS_MASK_BRRDY; mmwrite(irqcfg, MANTIS_GPIF_IRQCFG); + mutex_unlock(&ca->ca_lock); } diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h index 599ff1b57e48..f9aaaa52f52c 100644 --- a/drivers/media/dvb/mantis/mantis_link.h +++ b/drivers/media/dvb/mantis/mantis_link.h @@ -21,6 +21,7 @@ #ifndef __MANTIS_LINK_H #define __MANTIS_LINK_H +#include #include #include "dvb_ca_en50221.h" @@ -61,6 +62,7 @@ struct mantis_ca { void *ca_priv; struct dvb_ca_en50221 en50221; + struct mutex ca_lock; }; /* CA */ From 99b55b2c4478e6370aaa85173f5090a070c50a08 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:34:44 -0300 Subject: [PATCH 1111/1626] V4L/DVB (13789): [Mantis CA] Initialize the mutex Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_ca.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index 177b04813ff0..53c01b3023cc 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -156,6 +156,8 @@ int mantis_ca_init(struct mantis_pci *mantis) ca->en50221.poll_slot_status = mantis_slot_status; ca->en50221.data = ca; + mutex_init(&ca->ca_lock); + dprintk(verbose, MANTIS_ERROR, 1, "Registering EN50221 device"); if ((result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1)) != 0) { dprintk(verbose, MANTIS_ERROR, 1, "EN50221: Initialization failed"); From 42f541bfd1a9bad84a288d59a98fdb284df61a45 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:35:07 -0300 Subject: [PATCH 1112/1626] V4L/DVB (13790): [Mantis] Relocate queue initialization Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_ca.c | 4 ++++ drivers/media/dvb/mantis/mantis_hif.c | 3 --- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index 53c01b3023cc..7aa27e0703b8 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -158,6 +158,10 @@ int mantis_ca_init(struct mantis_pci *mantis) mutex_init(&ca->ca_lock); + init_waitqueue_head(&ca->hif_data_wq); + init_waitqueue_head(&ca->hif_opdone_wq); + init_waitqueue_head(&ca->hif_write_wq); + dprintk(verbose, MANTIS_ERROR, 1, "Registering EN50221 device"); if ((result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1)) != 0) { dprintk(verbose, MANTIS_ERROR, 1, "EN50221: Initialization failed"); diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index b1e1aa0f5c12..99a9724cbaff 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -209,9 +209,6 @@ int mantis_hif_init(struct mantis_ca *ca) slot[0].slave_cfg = 0x70773028; dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num); - init_waitqueue_head(&ca->hif_data_wq); - init_waitqueue_head(&ca->hif_opdone_wq); - init_waitqueue_head(&ca->hif_write_wq); mutex_lock(&ca->ca_lock); irqcfg = mmread(MANTIS_GPIF_IRQCFG); From 4af699c13a5fb7332255de5fa56442d065f547a3 Mon Sep 17 00:00:00 2001 From: Niklas Edmundsson Date: Fri, 4 Dec 2009 05:38:21 -0300 Subject: [PATCH 1113/1626] V4L/DVB (13791): [TDA10021] Do not claim TDA10023 Signed-off-by: Niklas Edmundsson Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda10021.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c index 6c1dbf9288d8..6ca533ea0f0e 100644 --- a/drivers/media/dvb/frontends/tda10021.c +++ b/drivers/media/dvb/frontends/tda10021.c @@ -426,6 +426,10 @@ struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config, id = tda10021_readreg(state, 0x1a); if ((id & 0xf0) != 0x70) goto error; + /* Don't claim TDA10023 */ + if (id == 0x7d) + goto error; + printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n", state->config->demod_address, id); From ec1b6ff1cce9d406a9a5f84a1d1205328f2c515a Mon Sep 17 00:00:00 2001 From: Niklas Edmundsson Date: Fri, 4 Dec 2009 05:38:52 -0300 Subject: [PATCH 1114/1626] V4L/DVB (13792): [Mantis/VP-2033] Do not claim TDA10023 Do not rely on the PCI ID alone Signed-off-by: Niklas Edmundsson Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_dvb.c | 37 ++++++++++++++------------- 1 file changed, 19 insertions(+), 18 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index 5172e8563546..de18bb97d8e9 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -263,30 +263,31 @@ int __devinit mantis_frontend_init(struct mantis_pci *mantis) } break; case MANTIS_VP_2033_DVB_C: // VP-2033 - dprintk(verbose, MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); - mantis->fe = tda10021_attach(&philips_cu1216_config, &mantis->adapter, read_pwm(mantis)); - if (mantis->fe) { - mantis->fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set; - dprintk(verbose, MANTIS_ERROR, 1, - "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", - philips_cu1216_config.demod_address); - - dprintk(verbose, MANTIS_ERROR, 1, - "Mantis DVB-C Philips CU1216 frontend attach success"); - - } - break; case MANTIS_VP_2040_DVB_C: // VP-2040 case TERRATEC_CINERGY_C_PCI: case TECHNISAT_CABLESTAR_HD2: dprintk(verbose, MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); - mantis->fe = tda10023_attach(&tda10023_cu1216_config, &mantis->adapter, read_pwm(mantis)); + mantis->fe = tda10021_attach(&philips_cu1216_config, + &mantis->adapter, + read_pwm(mantis)); + + if (mantis->fe) { + dprintk(verbose, MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", + philips_cu1216_config.demod_address); + } else { + mantis->fe = tda10023_attach(&tda10023_cu1216_config, + &mantis->adapter, + read_pwm(mantis)); + + if (mantis->fe) { + dprintk(verbose, MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + philips_cu1216_config.demod_address); + } + } if (mantis->fe) { mantis->fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set; - dprintk(verbose, MANTIS_ERROR, 1, - "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", - philips_cu1216_config.demod_address); - dprintk(verbose, MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); } From add206368462434ba97e8fe4de98e5d47ffdb0a0 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:39:57 -0300 Subject: [PATCH 1115/1626] V4L/DVB (13794): [Mantis/VP-3028] Initial go at Serial interface implementation, add support for VP-3028 Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/Makefile | 2 + drivers/media/dvb/mantis/mantis_common.h | 10 ++ drivers/media/dvb/mantis/mantis_core.c | 8 ++ drivers/media/dvb/mantis/mantis_pci.c | 2 + drivers/media/dvb/mantis/mantis_uart.c | 139 +++++++++++++++++++++++ drivers/media/dvb/mantis/mantis_uart.h | 25 +++- drivers/media/dvb/mantis/mantis_vp1033.c | 3 + drivers/media/dvb/mantis/mantis_vp1034.c | 3 + drivers/media/dvb/mantis/mantis_vp1041.c | 3 + drivers/media/dvb/mantis/mantis_vp2033.c | 3 + drivers/media/dvb/mantis/mantis_vp2040.c | 3 + drivers/media/dvb/mantis/mantis_vp3028.c | 38 +++++++ drivers/media/dvb/mantis/mantis_vp3028.h | 13 +++ drivers/media/dvb/mantis/mantis_vp3030.c | 3 + 14 files changed, 253 insertions(+), 2 deletions(-) create mode 100644 drivers/media/dvb/mantis/mantis_uart.c create mode 100644 drivers/media/dvb/mantis/mantis_vp3028.c create mode 100644 drivers/media/dvb/mantis/mantis_vp3028.h diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile index d002ef9f7449..bb88cdc98ce0 100644 --- a/drivers/media/dvb/mantis/Makefile +++ b/drivers/media/dvb/mantis/Makefile @@ -1,4 +1,5 @@ mantis-objs = mantis_core.o \ + mantis_uart.o \ mantis_dma.o \ mantis_pci.o \ mantis_i2c.o \ @@ -12,6 +13,7 @@ mantis-objs = mantis_core.o \ mantis_vp1041.o \ mantis_vp2033.o \ mantis_vp2040.o \ + mantis_vp3028.o \ mantis_vp3030.o obj-$(CONFIG_DVB_MANTIS) += mantis.o diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index 6b9f92b4ab39..6a02adf1ab4d 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -26,6 +26,7 @@ #include #include #include +#include #include "dvbdev.h" #include "dvb_demux.h" @@ -34,6 +35,7 @@ #include "dvb_net.h" #include #include "mantis_reg.h" +#include "mantis_uart.h" #include "mantis_link.h" @@ -74,6 +76,10 @@ struct mantis_hwconfig { char *model_name; char *dev_type; u32 ts_size; + + enum mantis_baud baud_rate; + enum mantis_parity parity; + u32 bytes; }; struct mantis_pci { @@ -142,6 +148,10 @@ struct mantis_pci { u32 gpif_status; struct mantis_ca *mantis_ca; + + wait_queue_head_t uart_wq; + struct work_struct uart_work; + spinlock_t uart_lock; }; #define MANTIS_HIF_STATUS (mantis->gpio_status) diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c index c3d0d53bc381..52b3e9ebfcfa 100644 --- a/drivers/media/dvb/mantis/mantis_core.c +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -165,6 +165,10 @@ int mantis_core_init(struct mantis_pci *mantis) dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB init failed"); return err; } + if ((err = mantis_uart_init(mantis)) < 0) { + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis UART init failed"); + return err; + } return 0; } @@ -173,6 +177,10 @@ int mantis_core_exit(struct mantis_pci *mantis) { mantis_dma_stop(mantis); dprintk(verbose, MANTIS_ERROR, 1, "DMA engine stopping"); + + mantis_uart_exit(mantis); + dprintk(verbose, MANTIS_ERROR, 1, "UART exit failed"); + if (mantis_dma_exit(mantis) < 0) dprintk(verbose, MANTIS_ERROR, 1, "DMA exit failed"); if (mantis_dvb_exit(mantis) < 0) diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c index 94abcee3fc72..d1eac4083fcc 100644 --- a/drivers/media/dvb/mantis/mantis_pci.c +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -27,6 +27,7 @@ #include #include "mantis_common.h" #include "mantis_core.h" +#include "mantis_uart.h" #include #include @@ -94,6 +95,7 @@ static irqreturn_t mantis_pci_irq(int irq, void *dev_id) } if (stat & MANTIS_INT_IRQ1) { dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-1 *"); + schedule_work(&mantis->uart_work); } if (stat & MANTIS_INT_OCERR) { dprintk(verbose, MANTIS_DEBUG, 0, "* INT OCERR *"); diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c new file mode 100644 index 000000000000..786fcc339117 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_uart.c @@ -0,0 +1,139 @@ +#include +#include "mantis_common.h" + +struct mantis_uart_params { + enum mantis_baud baud_rate; + enum mantis_parity parity; +}; + +#define UART_MAX_BUF 16 + +int mantis_uart_read(struct mantis_pci *mantis, u8 *data) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + u32 stat, i; + unsigned long flags; + + /* get data */ + for (i = 0; i < (config->bytes + 1); i++) { + + if (stat & MANTIS_UART_RXFIFO_FULL) { + dprintk(verbose, MANTIS_ERROR, 1, "RX Fifo FULL"); + } + data[i] = mmread(MANTIS_UART_RXD) & 0x3f; + + stat = mmread(MANTIS_UART_STAT); + + dprintk(verbose, MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f); + + if (data[i] & (1 << 7)) { + dprintk(verbose, MANTIS_ERROR, 1, "UART framing error"); + return -EINVAL; + } + if (data[i] & (1 << 6)) { + dprintk(verbose, MANTIS_ERROR, 1, "UART parity error"); + return -EINVAL; + } + } + + return 0; +} + +static void mantis_uart_work(struct work_struct *work) +{ + struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work); + struct mantis_hwconfig *config = mantis->hwconfig; + u8 buf[16]; + int i; + + dprintk(verbose, MANTIS_DEBUG, 1, "UART read"); + mantis_uart_read(mantis, buf); + + dprintk(verbose, MANTIS_DEBUG, 1, "UART: "); + for (i = 0; i < (config->bytes + 1); i++) + dprintk(verbose, MANTIS_DEBUG, 0, "<%02x> ", buf[i]); + + dprintk(verbose, MANTIS_DEBUG, 0, "\n"); +} + +static int mantis_uart_setup(struct mantis_pci *mantis, + struct mantis_uart_params *params) +{ + char* rates[] = { "B_9600", "B_19200", "B_38400", "B_57600", "B_115200" }; + char* parity[] = { "NONE", "ODD", "EVEN" }; + + u32 reg; + + dprintk(verbose, MANTIS_DEBUG, 1, "Set Parity <%s> Baud Rate <%s>", + parity[params->parity], + rates[params->baud_rate]); + + mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL); + + reg = mmread(MANTIS_UART_BAUD); + + switch (params->baud_rate) { + case MANTIS_BAUD_9600: + reg |= 0xd8; + break; + case MANTIS_BAUD_19200: + reg |= 0x6c; + break; + case MANTIS_BAUD_38400: + reg |= 0x36; + break; + case MANTIS_BAUD_57600: + reg |= 0x23; + break; + case MANTIS_BAUD_115200: + reg |= 0x11; + break; + default: + return -EINVAL; + } + + mmwrite(reg, MANTIS_UART_BAUD); + + return 0; +} + +int mantis_uart_init(struct mantis_pci *mantis) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + struct mantis_uart_params params; + + dprintk(verbose, MANTIS_DEBUG, 1, "Initializing UART .."); + /* default parity: */ + params.baud_rate = config->baud_rate; + params.parity = config->parity; + + init_waitqueue_head(&mantis->uart_wq); + spin_lock_init(&mantis->uart_lock); + + INIT_WORK(&mantis->uart_work, mantis_uart_work); + + /* disable interrupt */ + mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL); + + mantis_uart_setup(mantis, ¶ms); + + /* default 1 byte */ + mmwrite((mmread(MANTIS_UART_BAUD) | (config->bytes << 8)), MANTIS_UART_BAUD); + + /* flush buffer */ + mmwrite((mmread(MANTIS_UART_CTL) | MANTIS_UART_RXFLUSH), MANTIS_UART_CTL); + + /* enable interrupt */ + mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK); + mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL); + + schedule_work(&mantis->uart_work); + + return 0; +} + +void mantis_uart_exit(struct mantis_pci *mantis) +{ + /* disable interrupt */ + mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL); +} diff --git a/drivers/media/dvb/mantis/mantis_uart.h b/drivers/media/dvb/mantis/mantis_uart.h index 61138639c366..e9f938d37c3a 100644 --- a/drivers/media/dvb/mantis/mantis_uart.h +++ b/drivers/media/dvb/mantis/mantis_uart.h @@ -21,6 +21,21 @@ #ifndef __MANTIS_UART_H #define __MANTIS_UART_H +#define MANTIS_UART_CTL 0xe0 +#define MANTIS_UART_RXINT (1 << 4) +#define MANTIS_UART_RXFLUSH (1 << 2) + +#define MANTIS_UART_RXD 0xe8 +#define MANTIS_UART_BAUD 0xec + +#define MANTIS_UART_STAT 0xf0 +#define MANTIS_UART_RXFIFO_DATA (1 << 7) +#define MANTIS_UART_RXFIFO_EMPTY (1 << 6) +#define MANTIS_UART_RXFIFO_FULL (1 << 3) +#define MANTIS_UART_FRAME_ERR (1 << 2) +#define MANTIS_UART_PARITY_ERR (1 << 1) +#define MANTIS_UART_RXTHRESH_INT (1 << 0) + enum mantis_baud { MANTIS_BAUD_9600 = 0, MANTIS_BAUD_19200, @@ -30,9 +45,15 @@ enum mantis_baud { }; enum mantis_parity { - MANTIS_PARITY_NONE = 0, + MANTIS_PARITY_UNDEFINED = 0, MANTIS_PARITY_EVEN, - MANTIS_PARITY_ODD + MANTIS_PARITY_ODD, + MANTIS_PARITY_NONE }; +struct mantis_pci; + +extern int mantis_uart_init(struct mantis_pci *mantis); +extern void mantis_uart_exit(struct mantis_pci *mantis); + #endif // __MANTIS_UART_H diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c index 797c4e0c7eac..64cdfb8b709b 100644 --- a/drivers/media/dvb/mantis/mantis_vp1033.c +++ b/drivers/media/dvb/mantis/mantis_vp1033.c @@ -88,6 +88,9 @@ struct mantis_hwconfig vp1033_mantis_config = { .model_name = MANTIS_MODEL_NAME, .dev_type = MANTIS_DEV_TYPE, .ts_size = MANTIS_TS_204, + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, }; int lgtdqcs001f_tuner_set(struct dvb_frontend *fe, diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c index a2fe9d42d1e5..28f3420b2312 100644 --- a/drivers/media/dvb/mantis/mantis_vp1034.c +++ b/drivers/media/dvb/mantis/mantis_vp1034.c @@ -33,6 +33,9 @@ struct mantis_hwconfig vp1034_mantis_config = { .model_name = MANTIS_MODEL_NAME, .dev_type = MANTIS_DEV_TYPE, .ts_size = MANTIS_TS_204, + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, }; int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c index 8eb1afdab113..90df80b80e11 100644 --- a/drivers/media/dvb/mantis/mantis_vp1041.c +++ b/drivers/media/dvb/mantis/mantis_vp1041.c @@ -31,6 +31,9 @@ struct mantis_hwconfig vp1041_mantis_config = { .model_name = MANTIS_MODEL_NAME, .dev_type = MANTIS_DEV_TYPE, .ts_size = MANTIS_TS_188, + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, }; static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = { diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c index 4664d2959218..1171e69b7e64 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.c +++ b/drivers/media/dvb/mantis/mantis_vp2033.c @@ -28,6 +28,9 @@ struct mantis_hwconfig vp2033_mantis_config = { .model_name = MANTIS_MODEL_NAME, .dev_type = MANTIS_DEV_TYPE, .ts_size = MANTIS_TS_204, + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, }; struct tda1002x_config philips_cu1216_config = { diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c index f77be7b6491f..ce73d6beb5c6 100644 --- a/drivers/media/dvb/mantis/mantis_vp2040.c +++ b/drivers/media/dvb/mantis/mantis_vp2040.c @@ -28,6 +28,9 @@ struct mantis_hwconfig vp2040_mantis_config = { .model_name = MANTIS_MODEL_NAME, .dev_type = MANTIS_DEV_TYPE, .ts_size = MANTIS_TS_204, + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, }; struct tda10023_config tda10023_cu1216_config = { diff --git a/drivers/media/dvb/mantis/mantis_vp3028.c b/drivers/media/dvb/mantis/mantis_vp3028.c new file mode 100644 index 000000000000..7f8918c2ce64 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp3028.c @@ -0,0 +1,38 @@ +/* + Mantis VP-3028 driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_vp3028.h" + +struct zl10353_config mantis_vp3028_config = { + .demod_address = 0x0f, +}; + +#define MANTIS_MODEL_NAME "VP-3028" +#define MANTIS_DEV_TYPE "DVB-T" + +struct mantis_hwconfig vp3028_mantis_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp3028.h b/drivers/media/dvb/mantis/mantis_vp3028.h new file mode 100644 index 000000000000..c51628ddf3c8 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp3028.h @@ -0,0 +1,13 @@ +#ifndef __MANTIS_VP3028_H +#define __MANTIS_VP3028_H + +#include "dvb_frontend.h" +#include "mantis_common.h" +#include "zl10353.h" + +#define MANTIS_VP_3028_DVB_T 0x0028 + +extern struct zl10353_config mantis_vp3028_config; +extern struct mantis_hwconfig vp3028_mantis_config; + +#endif /* __MANTIS_VP3028_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c index cab092ce2306..9ca8040489dd 100644 --- a/drivers/media/dvb/mantis/mantis_vp3030.c +++ b/drivers/media/dvb/mantis/mantis_vp3030.c @@ -32,6 +32,9 @@ struct mantis_hwconfig vp3030_mantis_config = { .model_name = MANTIS_MODEL_NAME, .dev_type = MANTIS_DEV_TYPE, .ts_size = MANTIS_TS_188, + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, }; int panasonic_en57h12d5_set_params(struct dvb_frontend *fe, From b3b961448f702339444036f94252ff2ba7a99feb Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:41:11 -0300 Subject: [PATCH 1116/1626] V4L/DVB (13795): [Mantis/Hopper] Code overhaul, add Hopper devices into the PCI ID list Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/Kconfig | 22 +- drivers/media/dvb/mantis/Makefile | 42 +-- drivers/media/dvb/mantis/hopper_cards.c | 260 ++++++++++++++++ drivers/media/dvb/mantis/hopper_vp3028.c | 76 +++++ drivers/media/dvb/mantis/hopper_vp3028.h | 10 + drivers/media/dvb/mantis/mantis_ca.c | 69 +++-- drivers/media/dvb/mantis/mantis_ca.h | 7 + drivers/media/dvb/mantis/mantis_cards.c | 279 +++++++++++++++++ drivers/media/dvb/mantis/mantis_common.h | 68 ++--- drivers/media/dvb/mantis/mantis_dma.c | 55 ++-- drivers/media/dvb/mantis/mantis_dma.h | 10 + drivers/media/dvb/mantis/mantis_dvb.c | 362 ++++++++++------------- drivers/media/dvb/mantis/mantis_dvb.h | 15 + drivers/media/dvb/mantis/mantis_evm.c | 38 ++- drivers/media/dvb/mantis/mantis_hif.c | 60 ++-- drivers/media/dvb/mantis/mantis_hif.h | 2 +- drivers/media/dvb/mantis/mantis_i2c.c | 75 ++--- drivers/media/dvb/mantis/mantis_i2c.h | 7 + drivers/media/dvb/mantis/mantis_ioc.c | 145 +++++++++ drivers/media/dvb/mantis/mantis_link.h | 3 +- drivers/media/dvb/mantis/mantis_pci.c | 324 +++++++------------- drivers/media/dvb/mantis/mantis_pci.h | 7 + drivers/media/dvb/mantis/mantis_pcmcia.c | 22 +- drivers/media/dvb/mantis/mantis_reg.h | 40 ++- drivers/media/dvb/mantis/mantis_uart.c | 37 ++- drivers/media/dvb/mantis/mantis_uart.h | 2 +- drivers/media/dvb/mantis/mantis_vp1033.c | 98 +++--- drivers/media/dvb/mantis/mantis_vp1033.h | 13 +- drivers/media/dvb/mantis/mantis_vp1034.c | 70 ++++- drivers/media/dvb/mantis/mantis_vp1034.h | 6 +- drivers/media/dvb/mantis/mantis_vp1041.c | 79 ++++- drivers/media/dvb/mantis/mantis_vp1041.h | 14 +- drivers/media/dvb/mantis/mantis_vp2033.c | 99 +++++-- drivers/media/dvb/mantis/mantis_vp2033.h | 11 +- drivers/media/dvb/mantis/mantis_vp2040.c | 141 ++++++++- drivers/media/dvb/mantis/mantis_vp2040.h | 11 +- drivers/media/dvb/mantis/mantis_vp3030.c | 49 ++- drivers/media/dvb/mantis/mantis_vp3030.h | 8 +- 38 files changed, 1891 insertions(+), 745 deletions(-) create mode 100644 drivers/media/dvb/mantis/hopper_cards.c create mode 100644 drivers/media/dvb/mantis/hopper_vp3028.c create mode 100644 drivers/media/dvb/mantis/hopper_vp3028.h create mode 100644 drivers/media/dvb/mantis/mantis_ca.h create mode 100644 drivers/media/dvb/mantis/mantis_cards.c create mode 100644 drivers/media/dvb/mantis/mantis_dma.h create mode 100644 drivers/media/dvb/mantis/mantis_dvb.h create mode 100644 drivers/media/dvb/mantis/mantis_i2c.h create mode 100644 drivers/media/dvb/mantis/mantis_ioc.c create mode 100644 drivers/media/dvb/mantis/mantis_pci.h diff --git a/drivers/media/dvb/mantis/Kconfig b/drivers/media/dvb/mantis/Kconfig index 4ba16d0ad96b..aaf025097b44 100644 --- a/drivers/media/dvb/mantis/Kconfig +++ b/drivers/media/dvb/mantis/Kconfig @@ -1,6 +1,15 @@ +config MANTIS_CORE + tristate "Mantis/Hopper PCI bridge based devices" + depends on PCI && I2C + + help + Support for PCI cards based on the Mantis and Hopper PCi bridge. + + Say Y if you own such a device and want to use it. + config DVB_MANTIS tristate "MANTIS based cards" - depends on DVB_CORE && PCI && I2C + depends on MANTIS_CORE && DVB_CORE && PCI && I2C select DVB_MB86A16 select DVB_CU1216 select DVB_ZL10353 @@ -11,3 +20,14 @@ config DVB_MANTIS Say Y when you have a Mantis based DVB card and want to use it. If unsure say N. + +config DVB_HOPPER + tristate "HOPPER based cards" + depends on MANTIS_CORE && DVB_CORE && PCI && I2C + select DVB_ZL10353 + select DVB_PLL + help + Support for PCI cards based on the Hopper PCI bridge. + Say Y when you have a Hopper based DVB card and want to use it. + + If unsure say N diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile index bb88cdc98ce0..399c9018cdb0 100644 --- a/drivers/media/dvb/mantis/Makefile +++ b/drivers/media/dvb/mantis/Makefile @@ -1,21 +1,27 @@ -mantis-objs = mantis_core.o \ - mantis_uart.o \ - mantis_dma.o \ - mantis_pci.o \ - mantis_i2c.o \ - mantis_dvb.o \ - mantis_evm.o \ - mantis_hif.o \ - mantis_ca.o \ - mantis_pcmcia.o \ - mantis_vp1033.o \ - mantis_vp1034.o \ - mantis_vp1041.o \ - mantis_vp2033.o \ - mantis_vp2040.o \ - mantis_vp3028.o \ - mantis_vp3030.o +mantis_core-objs := mantis_ioc.o \ + mantis_uart.o \ + mantis_dma.o \ + mantis_pci.o \ + mantis_i2c.o \ + mantis_dvb.o \ + mantis_evm.o \ + mantis_hif.o \ + mantis_ca.o \ + mantis_pcmcia.o -obj-$(CONFIG_DVB_MANTIS) += mantis.o +mantis-objs := mantis_cards.o \ + mantis_vp1033.o \ + mantis_vp1034.o \ + mantis_vp1041.o \ + mantis_vp2033.o \ + mantis_vp2040.o \ + mantis_vp3030.o + +hopper-objs := hopper_cards.o \ + hopper_vp3028.o + +obj-$(CONFIG_MANTIS_CORE) += mantis_core.o +obj-$(CONFIG_DVB_MANTIS) += mantis.o +obj-$(CONFIG_DVB_HOPPER) += hopper.o EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c new file mode 100644 index 000000000000..749e3f3dd06b --- /dev/null +++ b/drivers/media/dvb/mantis/hopper_cards.c @@ -0,0 +1,260 @@ +#include +#include +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "hopper_vp3028.h" +#include "mantis_dma.h" +#include "mantis_dvb.h" +#include "mantis_uart.h" +#include "mantis_ioc.h" +#include "mantis_pci.h" +#include "mantis_i2c.h" +#include "mantis_reg.h" + +static unsigned int verbose; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)"); + +#define DRIVER_NAME "Hopper" + +static char *label[10] = { + "DMA", + "IRQ-0", + "IRQ-1", + "OCERR", + "PABRT", + "RIPRR", + "PPERR", + "FTRGT", + "RISCI", + "RACK" +}; + +static int devs; + +static irqreturn_t hopper_irq_handler(int irq, void *dev_id) +{ + u32 stat = 0, mask = 0, lstat = 0, mstat = 0; + u32 rst_stat = 0, rst_mask = 0; + + struct mantis_pci *mantis; + struct mantis_ca *ca; + + mantis = (struct mantis_pci *) dev_id; + if (unlikely(mantis == NULL)) { + dprintk(MANTIS_ERROR, 1, "Mantis == NULL"); + return IRQ_NONE; + } + ca = mantis->mantis_ca; + + stat = mmread(MANTIS_INT_STAT); + mask = mmread(MANTIS_INT_MASK); + mstat = lstat = stat & ~MANTIS_INT_RISCSTAT; + if (!(stat & mask)) + return IRQ_NONE; + + rst_mask = MANTIS_GPIF_WRACK | + MANTIS_GPIF_OTHERR | + MANTIS_SBUF_WSTO | + MANTIS_GPIF_EXTIRQ; + + rst_stat = mmread(MANTIS_GPIF_STATUS); + rst_stat &= rst_mask; + mmwrite(rst_stat, MANTIS_GPIF_STATUS); + + mantis->mantis_int_stat = stat; + mantis->mantis_int_mask = mask; + dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask); + if (stat & MANTIS_INT_RISCEN) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]); + } + if (stat & MANTIS_INT_IRQ0) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]); + mantis->gpif_status = rst_stat; + wake_up(&ca->hif_write_wq); + schedule_work(&ca->hif_evm_work); + } + if (stat & MANTIS_INT_IRQ1) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]); + schedule_work(&mantis->uart_work); + } + if (stat & MANTIS_INT_OCERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]); + } + if (stat & MANTIS_INT_PABORT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]); + } + if (stat & MANTIS_INT_RIPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]); + } + if (stat & MANTIS_INT_PPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]); + } + if (stat & MANTIS_INT_FTRGT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]); + } + if (stat & MANTIS_INT_RISCI) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]); + mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28; + tasklet_schedule(&mantis->tasklet); + } + if (stat & MANTIS_INT_I2CDONE) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]); + wake_up(&mantis->i2c_wq); + } + mmwrite(stat, MANTIS_INT_STAT); + stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE | + MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 | + MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 | + MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 | + MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 | + MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 | + MANTIS_INT_IRQ0 | MANTIS_INT_OCERR | + MANTIS_INT_PABORT | MANTIS_INT_RIPERR | + MANTIS_INT_PPERR | MANTIS_INT_FTRGT | + MANTIS_INT_RISCI); + + if (stat) + dprintk(MANTIS_DEBUG, 0, " Stat=<%02x> Mask=<%02x>", stat, mask); + + dprintk(MANTIS_DEBUG, 0, "\n"); + return IRQ_HANDLED; +} + +static int __devinit hopper_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) +{ + struct mantis_pci *mantis; + struct mantis_hwconfig *config; + int err = 0; + + mantis = kzalloc(sizeof (struct mantis_pci), GFP_KERNEL); + if (mantis == NULL) { + printk(KERN_ERR "%s ERROR: Out of memory\n", __func__); + err = -ENOMEM; + goto fail0; + } + + mantis->num = devs; + mantis->verbose = verbose; + mantis->pdev = pdev; + config = (struct mantis_hwconfig *) pci_id->driver_data; + config->irq_handler = &hopper_irq_handler; + mantis->hwconfig = config; + + err = mantis_pci_init(mantis); + if (err) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err); + goto fail1; + } + + err = mantis_stream_control(mantis, STREAM_TO_HIF); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err); + goto fail1; + } + + err = mantis_i2c_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err); + goto fail2; + } + + err = mantis_get_mac(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err); + goto fail2; + } + + err = mantis_dma_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err); + goto fail3; + } + + err = mantis_dvb_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err); + goto fail4; + } + devs++; + + return err; + +fail5: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB exit! <%d>", err); + mantis_dvb_exit(mantis); + +fail4: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err); + mantis_dma_exit(mantis); + +fail3: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err); + mantis_i2c_exit(mantis); + +fail2: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err); + mantis_pci_exit(mantis); + +fail1: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err); + kfree(mantis); + +fail0: + return err; +} + +static void __devexit hopper_pci_remove(struct pci_dev *pdev) +{ + struct mantis_pci *mantis = pci_get_drvdata(pdev); + + if (mantis) { +// mantis_uart_exit(mantis); + mantis_dvb_exit(mantis); + mantis_dma_exit(mantis); + mantis_i2c_exit(mantis); + mantis_pci_exit(mantis); + kfree(mantis); + } + return; + +} + +static struct pci_device_id hopper_pci_table[] = { + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3028_DVB_T, &vp3028_config), + { } +}; + +static struct pci_driver hopper_pci_driver = { + .name = DRIVER_NAME, + .id_table = hopper_pci_table, + .probe = hopper_pci_probe, + .remove = hopper_pci_remove, +}; + +static int __devinit hopper_init(void) +{ + return pci_register_driver(&hopper_pci_driver); +} + +static void __devexit hopper_exit(void) +{ + return pci_unregister_driver(&hopper_pci_driver); +} + +module_init(hopper_init); +module_exit(hopper_exit); + +MODULE_DESCRIPTION("HOPPER driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/dvb/mantis/hopper_vp3028.c new file mode 100644 index 000000000000..ba0c7e58b7a6 --- /dev/null +++ b/drivers/media/dvb/mantis/hopper_vp3028.c @@ -0,0 +1,76 @@ +/* + Mantis VP-3028 driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "zl10353.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "hopper_vp3028.h" + +struct zl10353_config hopper_vp3028_config = { + .demod_address = 0x0f, +}; + +#define MANTIS_MODEL_NAME "VP-3028" +#define MANTIS_DEV_TYPE "DVB-T" + +static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + mantis_frontend_soft_reset(mantis); + + dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); + fe = zl10353_attach(&hopper_vp3028_config, adapter); + + if (!fe) + return -1; + + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp3028_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp3028_frontend_init, + .power = GPIF_A00, + .reset = GPIF_A03, +}; diff --git a/drivers/media/dvb/mantis/hopper_vp3028.h b/drivers/media/dvb/mantis/hopper_vp3028.h new file mode 100644 index 000000000000..e8a3c2297bb1 --- /dev/null +++ b/drivers/media/dvb/mantis/hopper_vp3028.h @@ -0,0 +1,10 @@ +#ifndef __MANTIS_VP3028_H +#define __MANTIS_VP3028_H + +#include "mantis_common.h" + +#define MANTIS_VP_3028_DVB_T 0x0028 + +extern struct mantis_hwconfig vp3028_config; + +#endif /* __MANTIS_VP3028_H */ diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index 7aa27e0703b8..4151cba35e72 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -18,16 +18,30 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + #include "mantis_common.h" #include "mantis_link.h" #include "mantis_hif.h" +#include "mantis_reg.h" + +#include "mantis_ca.h" static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr) { struct mantis_ca *ca = en50221->data; struct mantis_pci *mantis = ca->ca_priv; - dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot); + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot); if (slot != 0) return -EINVAL; @@ -40,7 +54,7 @@ static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, in struct mantis_ca *ca = en50221->data; struct mantis_pci *mantis = ca->ca_priv; - dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot); + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot); if (slot != 0) return -EINVAL; @@ -53,7 +67,7 @@ static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 a struct mantis_ca *ca = en50221->data; struct mantis_pci *mantis = ca->ca_priv; - dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot); + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot); if (slot != 0) return -EINVAL; @@ -66,7 +80,7 @@ static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 struct mantis_ca *ca = en50221->data; struct mantis_pci *mantis = ca->ca_priv; - dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot); + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot); if (slot != 0) return -EINVAL; @@ -79,7 +93,7 @@ static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot) struct mantis_ca *ca = en50221->data; struct mantis_pci *mantis = ca->ca_priv; - dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot); + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot); udelay(500); /* Wait.. */ mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */ udelay(500); @@ -95,7 +109,7 @@ static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) struct mantis_ca *ca = en50221->data; struct mantis_pci *mantis = ca->ca_priv; - dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot); + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot); return 0; } @@ -105,8 +119,8 @@ static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot) struct mantis_ca *ca = en50221->data; struct mantis_pci *mantis = ca->ca_priv; - dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): TS control", slot); - mantis_set_direction(mantis, 1); /* Enable TS through CAM */ + dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot); +// mantis_set_direction(mantis, 1); /* Enable TS through CAM */ return 0; } @@ -116,13 +130,13 @@ static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open struct mantis_ca *ca = en50221->data; struct mantis_pci *mantis = ca->ca_priv; - dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot); + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot); if (ca->slot_state == MODULE_INSERTED) { - dprintk(verbose, MANTIS_DEBUG, 1, "CA Module present and ready"); + dprintk(MANTIS_DEBUG, 1, "CA Module present and ready"); return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; } else { - dprintk(verbose, MANTIS_DEBUG, 1, "CA Module not present or not ready"); + dprintk(MANTIS_DEBUG, 1, "CA Module not present or not ready"); } return 0; @@ -130,20 +144,21 @@ static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open int mantis_ca_init(struct mantis_pci *mantis) { - struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter; + struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter; struct mantis_ca *ca; int ca_flags = 0, result; - dprintk(verbose, MANTIS_DEBUG, 1, "Initializing Mantis CA"); - if (!(ca = kzalloc(sizeof (struct mantis_ca), GFP_KERNEL))) { - dprintk(verbose, MANTIS_ERROR, 1, "Out of memory!, exiting .."); + dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA"); + ca = kzalloc(sizeof (struct mantis_ca), GFP_KERNEL); + if (!ca) { + dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting .."); result = -ENOMEM; goto err; } - ca->ca_priv = mantis; - mantis->mantis_ca = ca; - ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE; + ca->ca_priv = mantis; + mantis->mantis_ca = ca; + ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE; /* register CA interface */ ca->en50221.owner = THIS_MODULE; ca->en50221.read_attribute_mem = mantis_ca_read_attr_mem; @@ -162,28 +177,32 @@ int mantis_ca_init(struct mantis_pci *mantis) init_waitqueue_head(&ca->hif_opdone_wq); init_waitqueue_head(&ca->hif_write_wq); - dprintk(verbose, MANTIS_ERROR, 1, "Registering EN50221 device"); - if ((result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1)) != 0) { - dprintk(verbose, MANTIS_ERROR, 1, "EN50221: Initialization failed"); + dprintk(MANTIS_ERROR, 1, "Registering EN50221 device"); + result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1); + if (result != 0) { + dprintk(MANTIS_ERROR, 1, "EN50221: Initialization failed <%d>", result); goto err; } - dprintk(verbose, MANTIS_ERROR, 1, "Registered EN50221 device"); + dprintk(MANTIS_ERROR, 1, "Registered EN50221 device"); mantis_evmgr_init(ca); return 0; err: kfree(ca); return result; } +EXPORT_SYMBOL_GPL(mantis_ca_init); void mantis_ca_exit(struct mantis_pci *mantis) { struct mantis_ca *ca = mantis->mantis_ca; - dprintk(verbose, MANTIS_DEBUG, 1, "Mantis CA exit"); + dprintk(MANTIS_DEBUG, 1, "Mantis CA exit"); mantis_evmgr_exit(ca); - dprintk(verbose, MANTIS_ERROR, 1, "Unregistering EN50221 device"); - dvb_ca_en50221_release(&ca->en50221); + dprintk(MANTIS_ERROR, 1, "Unregistering EN50221 device"); + if (ca) + dvb_ca_en50221_release(&ca->en50221); kfree(ca); } +EXPORT_SYMBOL_GPL(mantis_ca_exit); diff --git a/drivers/media/dvb/mantis/mantis_ca.h b/drivers/media/dvb/mantis/mantis_ca.h new file mode 100644 index 000000000000..b7e48ee1fac8 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_ca.h @@ -0,0 +1,7 @@ +#ifndef __MANTIS_CA_H +#define __MANTIS_CA_H + +extern int mantis_ca_init(struct mantis_pci *mantis); +extern void mantis_ca_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_CA_H */ diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c new file mode 100644 index 000000000000..d486c7fcb453 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_cards.c @@ -0,0 +1,279 @@ +#include +#include +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" + +#include "mantis_vp1033.h" +#include "mantis_vp1034.h" +#include "mantis_vp1041.h" +#include "mantis_vp2033.h" +#include "mantis_vp2040.h" +#include "mantis_vp3030.h" + +#include "mantis_dma.h" +#include "mantis_ca.h" +#include "mantis_dvb.h" +#include "mantis_uart.h" +#include "mantis_ioc.h" +#include "mantis_pci.h" +#include "mantis_i2c.h" +#include "mantis_reg.h" + +static unsigned int verbose; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)"); + +static int devs; + +#define DRIVER_NAME "Mantis" + +static char *label[10] = { + "DMA", + "IRQ-0", + "IRQ-1", + "OCERR", + "PABRT", + "RIPRR", + "PPERR", + "FTRGT", + "RISCI", + "RACK" +}; + + +static irqreturn_t mantis_irq_handler(int irq, void *dev_id) +{ + u32 stat = 0, mask = 0, lstat = 0, mstat = 0; + u32 rst_stat = 0, rst_mask = 0; + + struct mantis_pci *mantis; + struct mantis_ca *ca; + + mantis = (struct mantis_pci *) dev_id; + if (unlikely(mantis == NULL)) { + dprintk(MANTIS_ERROR, 1, "Mantis == NULL"); + return IRQ_NONE; + } + ca = mantis->mantis_ca; + + stat = mmread(MANTIS_INT_STAT); + mask = mmread(MANTIS_INT_MASK); + mstat = lstat = stat & ~MANTIS_INT_RISCSTAT; + if (!(stat & mask)) + return IRQ_NONE; + + rst_mask = MANTIS_GPIF_WRACK | + MANTIS_GPIF_OTHERR | + MANTIS_SBUF_WSTO | + MANTIS_GPIF_EXTIRQ; + + rst_stat = mmread(MANTIS_GPIF_STATUS); + rst_stat &= rst_mask; + mmwrite(rst_stat, MANTIS_GPIF_STATUS); + + mantis->mantis_int_stat = stat; + mantis->mantis_int_mask = mask; + dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask); + if (stat & MANTIS_INT_RISCEN) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]); + } + if (stat & MANTIS_INT_IRQ0) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]); + mantis->gpif_status = rst_stat; + wake_up(&ca->hif_write_wq); + schedule_work(&ca->hif_evm_work); + } + if (stat & MANTIS_INT_IRQ1) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]); + schedule_work(&mantis->uart_work); + } + if (stat & MANTIS_INT_OCERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]); + } + if (stat & MANTIS_INT_PABORT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]); + } + if (stat & MANTIS_INT_RIPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]); + } + if (stat & MANTIS_INT_PPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]); + } + if (stat & MANTIS_INT_FTRGT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]); + } + if (stat & MANTIS_INT_RISCI) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]); + mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28; + tasklet_schedule(&mantis->tasklet); + } + if (stat & MANTIS_INT_I2CDONE) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]); + wake_up(&mantis->i2c_wq); + } + mmwrite(stat, MANTIS_INT_STAT); + stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE | + MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 | + MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 | + MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 | + MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 | + MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 | + MANTIS_INT_IRQ0 | MANTIS_INT_OCERR | + MANTIS_INT_PABORT | MANTIS_INT_RIPERR | + MANTIS_INT_PPERR | MANTIS_INT_FTRGT | + MANTIS_INT_RISCI); + + if (stat) + dprintk(MANTIS_DEBUG, 0, " Stat=<%02x> Mask=<%02x>", stat, mask); + + dprintk(MANTIS_DEBUG, 0, "\n"); + return IRQ_HANDLED; +} + +static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) +{ + struct mantis_pci *mantis; + struct mantis_hwconfig *config; + int err = 0; + + mantis = kzalloc(sizeof (struct mantis_pci), GFP_KERNEL); + if (mantis == NULL) { + printk(KERN_ERR "%s ERROR: Out of memory\n", __func__); + err = -ENOMEM; + goto fail0; + } + + mantis->num = devs; + mantis->verbose = verbose; + mantis->pdev = pdev; + config = (struct mantis_hwconfig *) pci_id->driver_data; + config->irq_handler = &mantis_irq_handler; + mantis->hwconfig = config; + + err = mantis_pci_init(mantis); + if (err) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err); + goto fail1; + } + + err = mantis_stream_control(mantis, STREAM_TO_HIF); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err); + goto fail1; + } + + err = mantis_i2c_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err); + goto fail2; + } + + err = mantis_get_mac(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err); + goto fail2; + } + + err = mantis_dma_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err); + goto fail3; + } + + err = mantis_dvb_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err); + goto fail4; + } + devs++; + + return err; + +fail5: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB exit! <%d>", err); + mantis_dvb_exit(mantis); + +fail4: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err); + mantis_dma_exit(mantis); + +fail3: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err); + mantis_i2c_exit(mantis); + +fail2: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err); + mantis_pci_exit(mantis); + +fail1: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err); + kfree(mantis); + +fail0: + return err; +} + +static void __devexit mantis_pci_remove(struct pci_dev *pdev) +{ + struct mantis_pci *mantis = pci_get_drvdata(pdev); + + if (mantis) { + mantis_uart_exit(mantis); +// mantis_ca_exit(mantis); + mantis_dvb_exit(mantis); + mantis_dma_exit(mantis); + mantis_i2c_exit(mantis); + mantis_pci_exit(mantis); + kfree(mantis); + } + return; +} + +static struct pci_device_id mantis_pci_table[] = { + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1033_DVB_S, &vp1033_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1034_DVB_S, &vp1034_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1041_DVB_S2, &vp1041_config), + MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_10, &vp1041_config), + MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_20, &vp1041_config), + MAKE_ENTRY(TERRATEC, CINERGY_S2_PCI_HD, &vp1041_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2033_DVB_C, &vp2033_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2040_DVB_C, &vp2040_config), + MAKE_ENTRY(TECHNISAT, CABLESTAR_HD2, &vp2040_config), + MAKE_ENTRY(TERRATEC, CINERGY_C, &vp2033_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3030_DVB_T, &vp3030_config), + { } +}; + +static struct pci_driver mantis_pci_driver = { + .name = DRIVER_NAME, + .id_table = mantis_pci_table, + .probe = mantis_pci_probe, + .remove = mantis_pci_remove, +}; + +static int __devinit mantis_init(void) +{ + return pci_register_driver(&mantis_pci_driver); +} + +static void __devexit mantis_exit(void) +{ + return pci_unregister_driver(&mantis_pci_driver); +} + +module_init(mantis_init); +module_exit(mantis_exit); + +MODULE_DESCRIPTION("MANTIS driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index 6a02adf1ab4d..e912c5962e3a 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -21,20 +21,9 @@ #ifndef __MANTIS_COMMON_H #define __MANTIS_COMMON_H -#include -#include -#include -#include #include #include -#include "dvbdev.h" -#include "dvb_demux.h" -#include "dmxdev.h" -#include "dvb_frontend.h" -#include "dvb_net.h" -#include -#include "mantis_reg.h" #include "mantis_uart.h" #include "mantis_link.h" @@ -44,18 +33,18 @@ #define MANTIS_INFO 2 #define MANTIS_DEBUG 3 -#define dprintk(x, y, z, format, arg...) do { \ +#define dprintk(y, z, format, arg...) do { \ if (z) { \ - if ((x > MANTIS_ERROR) && (x > y)) \ + if ((mantis->verbose > MANTIS_ERROR) && (mantis->verbose > y)) \ printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ - else if ((x > MANTIS_NOTICE) && (x > y)) \ + else if ((mantis->verbose > MANTIS_NOTICE) && (mantis->verbose > y)) \ printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ - else if ((x > MANTIS_INFO) && (x > y)) \ + else if ((mantis->verbose > MANTIS_INFO) && (mantis->verbose > y)) \ printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ - else if ((x > MANTIS_DEBUG) && (x > y)) \ + else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y)) \ printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ } else { \ - if (x > y) \ + if (mantis->verbose > y) \ printk(format , ##arg); \ } \ } while(0) @@ -63,8 +52,8 @@ #define mwrite(dat, addr) writel((dat), addr) #define mread(addr) readl(addr) -#define mmwrite(dat, addr) mwrite((dat), (mantis->mantis_mmio + (addr))) -#define mmread(addr) mread(mantis->mantis_mmio + (addr)) +#define mmwrite(dat, addr) mwrite((dat), (mantis->mmio + (addr))) +#define mmread(addr) mread(mantis->mmio + (addr)) #define mmand(dat, addr) mmwrite((dat) & mmread(addr), addr) #define mmor(dat, addr) mmwrite((dat) | mmread(addr), addr) #define mmaor(dat, addr) mmwrite((dat) | ((mask) & mmread(addr)), addr) @@ -72,6 +61,22 @@ #define MANTIS_TS_188 0 #define MANTIS_TS_204 1 +#define TWINHAN_TECHNOLOGIES 0x1822 +#define MANTIS 0x4e35 + +#define TECHNISAT 0x1ae4 +#define TERRATEC 0x153b + +#define MAKE_ENTRY(__subven, __subdev, __configptr) { \ + .vendor = TWINHAN_TECHNOLOGIES, \ + .device = MANTIS, \ + .subvendor = (__subven), \ + .subdevice = (__subdev), \ + .driver_data = (unsigned long) (__configptr) \ +} + +struct mantis_pci; + struct mantis_hwconfig { char *model_name; char *dev_type; @@ -80,6 +85,12 @@ struct mantis_hwconfig { enum mantis_baud baud_rate; enum mantis_parity parity; u32 bytes; + + irqreturn_t (*irq_handler)(int irq, void *dev_id); + int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe); + + u8 power; + u8 reset; }; struct mantis_pci { @@ -96,7 +107,7 @@ struct mantis_pci { struct pci_dev *pdev; unsigned long mantis_addr; - volatile void __iomem *mantis_mmio; + void __iomem *mmio; u8 irq; u8 revision; @@ -156,19 +167,4 @@ struct mantis_pci { #define MANTIS_HIF_STATUS (mantis->gpio_status) -extern unsigned int verbose; -extern unsigned int devs; -extern unsigned int i2c; -extern int mantis_dvb_init(struct mantis_pci *mantis); -extern int mantis_frontend_init(struct mantis_pci *mantis); -extern int mantis_dvb_exit(struct mantis_pci *mantis); -extern void mantis_dma_xfer(unsigned long data); -extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value); - -extern void mantis_set_direction(struct mantis_pci *mantis, int direction); - -extern int mantis_ca_init(struct mantis_pci *mantis); -extern void mantis_ca_exit(struct mantis_pci *mantis); - - -#endif //__MANTIS_COMMON_H +#endif /* __MANTIS_COMMON_H */ diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c index d15a1eb980c8..8ebcd96b2b7d 100644 --- a/drivers/media/dvb/mantis/mantis_dma.c +++ b/drivers/media/dvb/mantis/mantis_dma.c @@ -18,9 +18,25 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include +#include + +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + #include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_dma.h" #define RISC_WRITE (0x01 << 28) #define RISC_JUMP (0x07 << 28) @@ -38,7 +54,7 @@ int mantis_dma_exit(struct mantis_pci *mantis) { if (mantis->buf_cpu) { - dprintk(verbose, MANTIS_ERROR, 1, + dprintk(MANTIS_ERROR, 1, "DMA=0x%lx cpu=0x%p size=%d", (unsigned long) mantis->buf_dma, mantis->buf_cpu, @@ -50,7 +66,7 @@ int mantis_dma_exit(struct mantis_pci *mantis) mantis->buf_cpu = NULL; } if (mantis->risc_cpu) { - dprintk(verbose, MANTIS_ERROR, 1, + dprintk(MANTIS_ERROR, 1, "RISC=0x%lx cpu=0x%p size=%lx", (unsigned long) mantis->risc_dma, mantis->risc_cpu, @@ -64,6 +80,7 @@ int mantis_dma_exit(struct mantis_pci *mantis) return 0; } +EXPORT_SYMBOL_GPL(mantis_dma_exit); static inline int mantis_alloc_buffers(struct mantis_pci *mantis) { @@ -72,12 +89,12 @@ static inline int mantis_alloc_buffers(struct mantis_pci *mantis) MANTIS_BUF_SIZE, &mantis->buf_dma); if (!mantis->buf_cpu) { - dprintk(verbose, MANTIS_ERROR, 1, + dprintk(MANTIS_ERROR, 1, "DMA buffer allocation failed"); goto err; } - dprintk(verbose, MANTIS_ERROR, 1, + dprintk(MANTIS_ERROR, 1, "DMA=0x%lx cpu=0x%p size=%d", (unsigned long) mantis->buf_dma, mantis->buf_cpu, MANTIS_BUF_SIZE); @@ -88,14 +105,14 @@ static inline int mantis_alloc_buffers(struct mantis_pci *mantis) &mantis->risc_dma); if (!mantis->risc_cpu) { - dprintk(verbose, MANTIS_ERROR, 1, + dprintk(MANTIS_ERROR, 1, "RISC program allocation failed"); mantis_dma_exit(mantis); goto err; } - dprintk(verbose, MANTIS_ERROR, 1, + dprintk(MANTIS_ERROR, 1, "RISC=0x%lx cpu=0x%p size=%lx", (unsigned long) mantis->risc_dma, mantis->risc_cpu, MANTIS_RISC_SIZE); @@ -103,7 +120,7 @@ static inline int mantis_alloc_buffers(struct mantis_pci *mantis) return 0; err: - dprintk(verbose, MANTIS_ERROR, 1, "Out of memory (?) ....."); + dprintk(MANTIS_ERROR, 1, "Out of memory (?) ....."); return -ENOMEM; } @@ -117,12 +134,11 @@ static inline int mantis_calc_lines(struct mantis_pci *mantis) mantis->line_count <<= 1; } - dprintk(verbose, MANTIS_DEBUG, 1, - "Mantis RISC block bytes=[%d], line bytes=[%d], line count=[%d]", + dprintk(MANTIS_DEBUG, 1, "Mantis RISC block bytes=[%d], line bytes=[%d], line count=[%d]", MANTIS_BLOCK_BYTES, mantis->line_bytes, mantis->line_count); if (mantis->line_count > 255) { - dprintk(verbose, MANTIS_ERROR, 1, "Buffer size error"); + dprintk(MANTIS_ERROR, 1, "Buffer size error"); return -EINVAL; } @@ -133,9 +149,9 @@ int mantis_dma_init(struct mantis_pci *mantis) { int err = 0; - dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DMA init"); + dprintk(MANTIS_DEBUG, 1, "Mantis DMA init"); if (mantis_alloc_buffers(mantis) < 0) { - dprintk(verbose, MANTIS_ERROR, 1, "Error allocating DMA buffer"); + dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer"); // Stop RISC Engine // mmwrite(mmread(MANTIS_DMA_CTL) & ~MANTIS_RISC_EN, MANTIS_DMA_CTL); @@ -144,7 +160,7 @@ int mantis_dma_init(struct mantis_pci *mantis) goto err; } if ((err = mantis_calc_lines(mantis)) < 0) { - dprintk(verbose, MANTIS_ERROR, 1, "Mantis calc lines failed"); + dprintk(MANTIS_ERROR, 1, "Mantis calc lines failed"); goto err; } @@ -153,20 +169,21 @@ int mantis_dma_init(struct mantis_pci *mantis) err: return err; } +EXPORT_SYMBOL_GPL(mantis_dma_init); static inline void mantis_risc_program(struct mantis_pci *mantis) { u32 buf_pos = 0; u32 line; - dprintk(verbose, MANTIS_DEBUG, 1, "Mantis create RISC program"); + dprintk(MANTIS_DEBUG, 1, "Mantis create RISC program"); RISC_FLUSH(); - dprintk(verbose, MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u", + dprintk(MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u", mantis->line_count, mantis->line_bytes); for (line = 0; line < mantis->line_count; line++) { - dprintk(verbose, MANTIS_DEBUG, 1, "RISC PROG line=[%d]", line); + dprintk(MANTIS_DEBUG, 1, "RISC PROG line=[%d]", line); if (!(buf_pos % MANTIS_BLOCK_BYTES)) { RISC_INSTR(RISC_WRITE | RISC_IRQ | @@ -186,7 +203,7 @@ static inline void mantis_risc_program(struct mantis_pci *mantis) void mantis_dma_start(struct mantis_pci *mantis) { - dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Start DMA engine"); + dprintk(MANTIS_DEBUG, 1, "Mantis Start DMA engine"); mantis_risc_program(mantis); mmwrite(mantis->risc_dma, MANTIS_RISC_START); @@ -208,7 +225,7 @@ void mantis_dma_stop(struct mantis_pci *mantis) stat = mmread(MANTIS_INT_STAT); mask = mmread(MANTIS_INT_MASK); - dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Stop DMA engine"); + dprintk(MANTIS_DEBUG, 1, "Mantis Stop DMA engine"); mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_HIFRDWRN))), MANTIS_GPIF_ADDR); @@ -229,7 +246,7 @@ void mantis_dma_xfer(unsigned long data) struct mantis_hwconfig *config = mantis->hwconfig; while (mantis->last_block != mantis->finished_block) { - dprintk(verbose, MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]", + dprintk(MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]", mantis->last_block, mantis->finished_block); (config->ts_size ? dvb_dmx_swfilter_204: dvb_dmx_swfilter) diff --git a/drivers/media/dvb/mantis/mantis_dma.h b/drivers/media/dvb/mantis/mantis_dma.h new file mode 100644 index 000000000000..4cba8763536f --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_dma.h @@ -0,0 +1,10 @@ +#ifndef __MANTIS_DMA_H +#define __MANTIS_DMA_H + +extern int mantis_dma_init(struct mantis_pci *mantis); +extern int mantis_dma_exit(struct mantis_pci *mantis); +extern void mantis_dma_start(struct mantis_pci *mantis); +extern void mantis_dma_stop(struct mantis_pci *mantis); +extern void mantis_dma_xfer(unsigned long data); + +#endif /* __MANTIS_DMA_H */ diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index de18bb97d8e9..be911d76daa7 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -17,65 +17,86 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include -#include "mantis_common.h" -#include "mantis_core.h" + +#include +#include +#include +#include +#include +#include #include "dmxdev.h" #include "dvbdev.h" #include "dvb_demux.h" #include "dvb_frontend.h" -#include "mantis_vp1033.h" -#include "mantis_vp1034.h" -#include "mantis_vp1041.h" -#include "mantis_vp2033.h" -#include "mantis_vp2040.h" -#include "mantis_vp3030.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_dma.h" +#include "mantis_ca.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -/* Tuner power supply control */ -void mantis_fe_powerup(struct mantis_pci *mantis) +int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power) { - dprintk(verbose, MANTIS_DEBUG, 1, "Frontend Power ON"); - gpio_set_bits(mantis, 0x0c, 1); - msleep_interruptible(100); - gpio_set_bits(mantis, 0x0c, 1); - msleep_interruptible(100); -} + struct mantis_hwconfig *config = mantis->hwconfig; -void mantis_fe_powerdown(struct mantis_pci *mantis) -{ - dprintk(verbose, MANTIS_DEBUG, 1, "Frontend Power OFF"); - gpio_set_bits(mantis, 0x0c, 0); -} + switch (power) { + case POWER_ON: + dprintk(MANTIS_DEBUG, 1, "Power ON"); + gpio_set_bits(mantis, config->power, POWER_ON); + msleep(100); + gpio_set_bits(mantis, config->power, POWER_ON); + msleep(100); + break; -static int mantis_fe_reset(struct dvb_frontend *fe) -{ - struct mantis_pci *mantis = fe->dvb->priv; + case POWER_OFF: + dprintk(MANTIS_DEBUG, 1, "Power OFF"); + gpio_set_bits(mantis, config->power, POWER_OFF); + msleep(100); + break; - dprintk(verbose, MANTIS_DEBUG, 1, "Frontend Reset"); - gpio_set_bits(mantis, 13, 0); - msleep_interruptible(100); - gpio_set_bits(mantis, 13, 0); - msleep_interruptible(100); - gpio_set_bits(mantis, 13, 1); - msleep_interruptible(100); - gpio_set_bits(mantis, 13, 1); + default: + dprintk(MANTIS_DEBUG, 1, "Unknown state <%02x>", power); + return -1; + } return 0; } +EXPORT_SYMBOL_GPL(mantis_frontend_power); -static int mantis_frontend_reset(struct mantis_pci *mantis) +void mantis_frontend_soft_reset(struct mantis_pci *mantis) { - dprintk(verbose, MANTIS_DEBUG, 1, "Frontend Reset"); - gpio_set_bits(mantis, 13, 0); - msleep_interruptible(100); - gpio_set_bits(mantis, 13, 0); - msleep_interruptible(100); - gpio_set_bits(mantis, 13, 1); - msleep_interruptible(100); - gpio_set_bits(mantis, 13, 1); + struct mantis_hwconfig *config = mantis->hwconfig; + + dprintk(MANTIS_DEBUG, 1, "Frontend RESET"); + gpio_set_bits(mantis, config->reset, 0); + msleep(100); + gpio_set_bits(mantis, config->reset, 0); + msleep(100); + gpio_set_bits(mantis, config->reset, 1); + msleep(100); + gpio_set_bits(mantis, config->reset, 1); + msleep(100); + + return; +} +EXPORT_SYMBOL_GPL(mantis_frontend_soft_reset); + +static int mantis_frontend_shutdown(struct mantis_pci *mantis) +{ + int err; + + mantis_frontend_soft_reset(mantis); + err = mantis_frontend_power(mantis, POWER_OFF); + if (err != 0) { + dprintk(MANTIS_ERROR, 1, "Frontend POWER OFF failed! <%d>", err); + return 1; + } return 0; } @@ -85,18 +106,17 @@ static int mantis_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) struct dvb_demux *dvbdmx = dvbdmxfeed->demux; struct mantis_pci *mantis = dvbdmx->priv; - dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB Start feed"); + dprintk(MANTIS_DEBUG, 1, "Mantis DVB Start feed"); if (!dvbdmx->dmx.frontend) { - dprintk(verbose, MANTIS_DEBUG, 1, "no frontend ?"); + dprintk(MANTIS_DEBUG, 1, "no frontend ?"); return -EINVAL; } + mantis->feeds++; - dprintk(verbose, MANTIS_DEBUG, 1, - "mantis start feed, feeds=%d", - mantis->feeds); + dprintk(MANTIS_DEBUG, 1, "mantis start feed, feeds=%d", mantis->feeds); if (mantis->feeds == 1) { - dprintk(verbose, MANTIS_DEBUG, 1, "mantis start feed & dma"); + dprintk(MANTIS_DEBUG, 1, "mantis start feed & dma"); printk("mantis start feed & dma\n"); mantis_dma_start(mantis); } @@ -109,95 +129,129 @@ static int mantis_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) struct dvb_demux *dvbdmx = dvbdmxfeed->demux; struct mantis_pci *mantis = dvbdmx->priv; - dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB Stop feed"); + dprintk(MANTIS_DEBUG, 1, "Mantis DVB Stop feed"); if (!dvbdmx->dmx.frontend) { - dprintk(verbose, MANTIS_DEBUG, 1, "no frontend ?"); + dprintk(MANTIS_DEBUG, 1, "no frontend ?"); return -EINVAL; } + mantis->feeds--; if (mantis->feeds == 0) { - dprintk(verbose, MANTIS_DEBUG, 1, "mantis stop feed and dma"); + dprintk(MANTIS_DEBUG, 1, "mantis stop feed and dma"); printk("mantis stop feed and dma\n"); mantis_dma_stop(mantis); } + return 0; } int __devinit mantis_dvb_init(struct mantis_pci *mantis) { - int result; + struct mantis_hwconfig *config = mantis->hwconfig; + int result = -1; - dprintk(verbose, MANTIS_DEBUG, 1, "dvb_register_adapter"); - if (dvb_register_adapter(&mantis->dvb_adapter, - "Mantis dvb adapter", THIS_MODULE, - &mantis->pdev->dev, - adapter_nr) < 0) { + dprintk(MANTIS_DEBUG, 1, "dvb_register_adapter"); - dprintk(verbose, MANTIS_ERROR, 1, "Error registering adapter"); + result = dvb_register_adapter(&mantis->dvb_adapter, + "Mantis DVB adapter", + THIS_MODULE, + &mantis->pdev->dev, + adapter_nr); + + if (result < 0) { + + dprintk(MANTIS_ERROR, 1, "Error registering adapter"); return -ENODEV; } - mantis->dvb_adapter.priv = mantis; - mantis->demux.dmx.capabilities = DMX_TS_FILTERING | + + mantis->dvb_adapter.priv = mantis; + mantis->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING; - mantis->demux.priv = mantis; - mantis->demux.filternum = 256; - mantis->demux.feednum = 256; - mantis->demux.start_feed = mantis_dvb_start_feed; - mantis->demux.stop_feed = mantis_dvb_stop_feed; - mantis->demux.write_to_decoder = NULL; - dprintk(verbose, MANTIS_DEBUG, 1, "dvb_dmx_init"); - if ((result = dvb_dmx_init(&mantis->demux)) < 0) { - dprintk(verbose, MANTIS_ERROR, 1, - "dvb_dmx_init failed, ERROR=%d", result); + mantis->demux.priv = mantis; + mantis->demux.filternum = 256; + mantis->demux.feednum = 256; + mantis->demux.start_feed = mantis_dvb_start_feed; + mantis->demux.stop_feed = mantis_dvb_stop_feed; + mantis->demux.write_to_decoder = NULL; + + dprintk(MANTIS_DEBUG, 1, "dvb_dmx_init"); + result = dvb_dmx_init(&mantis->demux); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); goto err0; } - mantis->dmxdev.filternum = 256; - mantis->dmxdev.demux = &mantis->demux.dmx; - mantis->dmxdev.capabilities = 0; - dprintk(verbose, MANTIS_DEBUG, 1, "dvb_dmxdev_init"); - if ((result = dvb_dmxdev_init(&mantis->dmxdev, - &mantis->dvb_adapter)) < 0) { - dprintk(verbose, MANTIS_ERROR, 1, - "dvb_dmxdev_init failed, ERROR=%d", result); + mantis->dmxdev.filternum = 256; + mantis->dmxdev.demux = &mantis->demux.dmx; + mantis->dmxdev.capabilities = 0; + dprintk(MANTIS_DEBUG, 1, "dvb_dmxdev_init"); + + result = dvb_dmxdev_init(&mantis->dmxdev, &mantis->dvb_adapter); + if (result < 0) { + + dprintk(MANTIS_ERROR, 1, "dvb_dmxdev_init failed, ERROR=%d", result); goto err1; } - mantis->fe_hw.source = DMX_FRONTEND_0; - if ((result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, - &mantis->fe_hw)) < 0) { - dprintk(verbose, MANTIS_ERROR, 1, - "dvb_dmx_init failed, ERROR=%d", result); + mantis->fe_hw.source = DMX_FRONTEND_0; + result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_hw); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); goto err2; } - mantis->fe_mem.source = DMX_MEMORY_FE; - if ((result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, - &mantis->fe_mem)) < 0) { - dprintk(verbose, MANTIS_ERROR, 1, - "dvb_dmx_init failed, ERROR=%d", result); + mantis->fe_mem.source = DMX_MEMORY_FE; + result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx,&mantis->fe_mem); + if (result < 0) { + dprintk(MANTIS_ERROR, 1,"dvb_dmx_init failed, ERROR=%d", result); goto err3; } - if ((result = mantis->demux.dmx.connect_frontend(&mantis->demux.dmx, - &mantis->fe_hw)) < 0) { - - dprintk(verbose, MANTIS_ERROR, 1, - "dvb_dmx_init failed, ERROR=%d", result); + result = mantis->demux.dmx.connect_frontend(&mantis->demux.dmx, &mantis->fe_hw); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); goto err4; } + dvb_net_init(&mantis->dvb_adapter, &mantis->dvbnet, &mantis->demux.dmx); tasklet_init(&mantis->tasklet, mantis_dma_xfer, (unsigned long) mantis); - mantis_frontend_init(mantis); - mantis_ca_init(mantis); + if (mantis->hwconfig) { + result = config->frontend_init(mantis, mantis->fe); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "!!! NO Frontends found !!!"); + goto err5; + } else { +// if (mantis->dvb_adapter == NULL) { +// dprintk(MANTIS_ERROR, 1, "DVB adapter "); +// goto err5; +// } + if (mantis->fe == NULL) { + dprintk(MANTIS_ERROR, 1, "FE "); + goto err5; + } + + if (dvb_register_frontend(&mantis->dvb_adapter, mantis->fe)) { + dprintk(MANTIS_ERROR, 1, "ERROR: Frontend registration failed"); + + if (mantis->fe->ops.release) + mantis->fe->ops.release(mantis->fe); + + mantis->fe = NULL; + goto err5; + } + } + } return 0; - /* Error conditions .. */ + /* Error conditions .. */ +err5: + tasklet_kill(&mantis->tasklet); + dvb_net_release(&mantis->dvbnet); err4: mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem); err3: @@ -211,115 +265,17 @@ err0: return result; } - -int __devinit mantis_frontend_init(struct mantis_pci *mantis) -{ - dprintk(verbose, MANTIS_DEBUG, 1, "Mantis frontend Init"); - mantis_fe_powerup(mantis); - mantis_frontend_reset(mantis); - dprintk(verbose, MANTIS_DEBUG, 1, "Device ID=%02x", mantis->subsystem_device); - switch (mantis->subsystem_device) { - case MANTIS_VP_1033_DVB_S: // VP-1033 - dprintk(verbose, MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)"); - mantis->fe = stv0299_attach(&lgtdqcs001f_config, - &mantis->adapter); - - if (mantis->fe) { - mantis->fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set; - dprintk(verbose, MANTIS_ERROR, 1, - "found STV0299 DVB-S frontend @ 0x%02x", - lgtdqcs001f_config.demod_address); - - dprintk(verbose, MANTIS_ERROR, 1, - "Mantis DVB-S STV0299 frontend attach success"); - } - break; - case MANTIS_VP_1034_DVB_S: // VP-1034 - dprintk(verbose, MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)"); - mantis->fe = mb86a16_attach(&vp1034_config, &mantis->adapter); - if (mantis->fe) { - dprintk(verbose, MANTIS_ERROR, 1, - "found MB86A16 DVB-S/DSS frontend @0x%02x", - vp1034_config.demod_address); - - } - break; - case MANTIS_VP_1041_DVB_S2: - case TECHNISAT_SKYSTAR_HD2: - mantis->fe = stb0899_attach(&vp1041_config, &mantis->adapter); - if (mantis->fe) { - dprintk(verbose, MANTIS_ERROR, 1, - "found STB0899 DVB-S/DVB-S2 frontend @0x%02x", - vp1041_config.demod_address); - - if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, &mantis->adapter)) { - if (!lnbp21_attach(mantis->fe, &mantis->adapter, 0, 0)) { - printk("%s: No LNBP21 found!\n", __FUNCTION__); - mantis->fe = NULL; - } - } else { - mantis->fe = NULL; - } - } - break; - case MANTIS_VP_2033_DVB_C: // VP-2033 - case MANTIS_VP_2040_DVB_C: // VP-2040 - case TERRATEC_CINERGY_C_PCI: - case TECHNISAT_CABLESTAR_HD2: - dprintk(verbose, MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); - mantis->fe = tda10021_attach(&philips_cu1216_config, - &mantis->adapter, - read_pwm(mantis)); - - if (mantis->fe) { - dprintk(verbose, MANTIS_ERROR, 1, - "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", - philips_cu1216_config.demod_address); - } else { - mantis->fe = tda10023_attach(&tda10023_cu1216_config, - &mantis->adapter, - read_pwm(mantis)); - - if (mantis->fe) { - dprintk(verbose, MANTIS_ERROR, 1, - "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", - philips_cu1216_config.demod_address); - } - } - if (mantis->fe) { - mantis->fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set; - dprintk(verbose, MANTIS_ERROR, 1, - "Mantis DVB-C Philips CU1216 frontend attach success"); - } - break; - default: - dprintk(verbose, MANTIS_DEBUG, 1, "Unknown frontend:[0x%02x]", - mantis->sub_device_id); - - return -ENODEV; - } - if (mantis->fe == NULL) { - dprintk(verbose, MANTIS_ERROR, 1, "!!! NO Frontends found !!!"); - return -ENODEV; - } else { - if (dvb_register_frontend(&mantis->dvb_adapter, mantis->fe)) { - dprintk(verbose, MANTIS_ERROR, 1, - "ERROR: Frontend registration failed"); - - if (mantis->fe->ops.release) - mantis->fe->ops.release(mantis->fe); - - mantis->fe = NULL; - return -ENODEV; - } - } - - return 0; -} +EXPORT_SYMBOL_GPL(mantis_dvb_init); int __devexit mantis_dvb_exit(struct mantis_pci *mantis) { - mantis_ca_exit(mantis); + int err; + + err = mantis_frontend_shutdown(mantis); + if (err != 0) + dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err); + +// mantis_ca_exit(mantis); tasklet_kill(&mantis->tasklet); dvb_net_release(&mantis->dvbnet); mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem); @@ -329,8 +285,10 @@ int __devexit mantis_dvb_exit(struct mantis_pci *mantis) if (mantis->fe) dvb_unregister_frontend(mantis->fe); - dprintk(verbose, MANTIS_DEBUG, 1, "dvb_unregister_adapter"); + + dprintk(MANTIS_DEBUG, 1, "dvb_unregister_adapter"); dvb_unregister_adapter(&mantis->dvb_adapter); return 0; } +EXPORT_SYMBOL_GPL(mantis_dvb_exit); diff --git a/drivers/media/dvb/mantis/mantis_dvb.h b/drivers/media/dvb/mantis/mantis_dvb.h new file mode 100644 index 000000000000..31ebbb47df3e --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_dvb.h @@ -0,0 +1,15 @@ +#ifndef __MANTIS_DVB_H +#define __MANTIS_DVB_H + +enum mantis_power { + POWER_OFF = 0, + POWER_ON = 1 +}; + +extern int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power); +extern void mantis_frontend_soft_reset(struct mantis_pci *mantis); + +extern int mantis_dvb_init(struct mantis_pci *mantis); +extern int mantis_dvb_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_DVB_H */ diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index 9be55f7942d4..2005b2489b74 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -18,9 +18,23 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include + +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + #include "mantis_common.h" #include "mantis_link.h" #include "mantis_hif.h" +#include "mantis_reg.h" static void mantis_hifevm_work(struct work_struct *work) { @@ -34,7 +48,7 @@ static void mantis_hifevm_work(struct work_struct *work) if (gpif_stat & MANTIS_GPIF_DETSTAT) { if (gpif_stat & MANTIS_CARD_PLUGIN) { - dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num); mmwrite(0xdada0000, MANTIS_CARD_RESET); mantis_event_cam_plugin(ca); dvb_ca_en50221_camchange_irq(&ca->en50221, @@ -43,7 +57,7 @@ static void mantis_hifevm_work(struct work_struct *work) } } else { if (gpif_stat & MANTIS_CARD_PLUGOUT) { - dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num); mmwrite(0xdada0000, MANTIS_CARD_RESET); mantis_event_cam_unplug(ca); dvb_ca_en50221_camchange_irq(&ca->en50221, @@ -53,28 +67,28 @@ static void mantis_hifevm_work(struct work_struct *work) } if (mantis->gpif_status & MANTIS_GPIF_EXTIRQ) - dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num); if (mantis->gpif_status & MANTIS_SBUF_WSTO) - dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num); if (mantis->gpif_status & MANTIS_GPIF_OTHERR) - dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num); if (gpif_stat & MANTIS_SBUF_OVFLW) - dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num); if (gpif_stat & MANTIS_GPIF_BRRDY) - dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num); if (gpif_stat & MANTIS_GPIF_INTSTAT) - dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num); if (gpif_stat & MANTIS_SBUF_EMPTY) - dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num); if (gpif_stat & MANTIS_SBUF_OPDONE) { - dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num); ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL; ca->hif_event = MANTIS_SBUF_OPDONE; wake_up(&ca->hif_opdone_wq); @@ -85,7 +99,7 @@ int mantis_evmgr_init(struct mantis_ca *ca) { struct mantis_pci *mantis = ca->ca_priv; - dprintk(verbose, MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager"); + dprintk(MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager"); INIT_WORK(&ca->hif_evm_work, mantis_hifevm_work); mantis_pcmcia_init(ca); schedule_work(&ca->hif_evm_work); @@ -97,7 +111,7 @@ void mantis_evmgr_exit(struct mantis_ca *ca) { struct mantis_pci *mantis = ca->ca_priv; - dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting"); + dprintk(MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting"); flush_scheduled_work(); mantis_hif_exit(ca); mantis_pcmcia_exit(ca); diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 99a9724cbaff..bb05427fdeb6 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -18,10 +18,28 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include +#include +#include + +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + #include "mantis_common.h" + #include "mantis_hif.h" #include "mantis_link.h" /* temporary due to physical layer stuff */ +#include "mantis_reg.h" + static int mantis_hif_data_available(struct mantis_ca *ca) { struct mantis_pci *mantis = ca->ca_priv; @@ -31,7 +49,7 @@ static int mantis_hif_data_available(struct mantis_ca *ca) ca->sbuf_status & MANTIS_SBUF_DATA_AVAIL, msecs_to_jiffies(500)) == -ERESTARTSYS) { - dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Read wait event timeout !", mantis->num); + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Read wait event timeout !", mantis->num); rc = -EREMOTEIO; } ca->sbuf_status &= ~MANTIS_SBUF_DATA_AVAIL; @@ -48,10 +66,10 @@ static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca) ca->hif_event & MANTIS_SBUF_OPDONE, msecs_to_jiffies(500)) == -ERESTARTSYS) { - dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num); + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num); rc = -EREMOTEIO; } - dprintk(verbose, MANTIS_DEBUG, 1, "Smart Buffer Operation complete"); + dprintk(MANTIS_DEBUG, 1, "Smart Buffer Operation complete"); ca->hif_event &= ~MANTIS_SBUF_OPDONE; return rc; } @@ -66,22 +84,22 @@ static int mantis_hif_write_wait(struct mantis_ca *ca) mantis->gpif_status & MANTIS_GPIF_WRACK, msecs_to_jiffies(500)) == -ERESTARTSYS) { - dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num); + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num); rc = -EREMOTEIO; } - dprintk(verbose, MANTIS_DEBUG, 1, "Write Acknowledged"); + dprintk(MANTIS_DEBUG, 1, "Write Acknowledged"); mantis->gpif_status &= ~MANTIS_GPIF_WRACK; while (!opdone) { opdone = (mmread(MANTIS_GPIF_STATUS) & MANTIS_SBUF_OPDONE); udelay(500); timeout++; if (timeout > 100) { - dprintk(verbose, MANTIS_ERROR, 1, "Adater(%d) Slot(0): Write operation timed out!", mantis->num); + dprintk(MANTIS_ERROR, 1, "Adater(%d) Slot(0): Write operation timed out!", mantis->num); rc = -ETIMEDOUT; break; } } - dprintk(verbose, MANTIS_DEBUG, 1, "HIF Write success"); + dprintk(MANTIS_DEBUG, 1, "HIF Write success"); return rc; } @@ -91,7 +109,7 @@ int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) struct mantis_pci *mantis = ca->ca_priv; u32 hif_addr = 0, data, count = 4; - dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num); mutex_lock(&ca->ca_lock); hif_addr &= ~MANTIS_GPIF_PCMCIAREG; hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; @@ -104,13 +122,13 @@ int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR); if (mantis_hif_sbuf_opdone_wait(ca) != 0) { - dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num); + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num); mutex_unlock(&ca->ca_lock); return -EREMOTEIO; } data = mmread(MANTIS_GPIF_DIN); mutex_unlock(&ca->ca_lock); - dprintk(verbose, MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data); + dprintk(MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data); return (data >> 24) & 0xff; } @@ -120,7 +138,7 @@ int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) struct mantis_pci *mantis = ca->ca_priv; u32 hif_addr = 0; - dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num); mutex_lock(&ca->ca_lock); hif_addr &= ~MANTIS_GPIF_HIFRDWRN; hif_addr &= ~MANTIS_GPIF_PCMCIAREG; @@ -133,11 +151,11 @@ int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) mmwrite(data, MANTIS_GPIF_DOUT); if (mantis_hif_write_wait(ca) != 0) { - dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); mutex_unlock(&ca->ca_lock); return -EREMOTEIO; } - dprintk(verbose, MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr); + dprintk(MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr); mutex_unlock(&ca->ca_lock); return 0; @@ -148,7 +166,7 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) struct mantis_pci *mantis = ca->ca_priv; u32 data, hif_addr = 0; - dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num); mutex_lock(&ca->ca_lock); hif_addr &= ~MANTIS_GPIF_PCMCIAREG; hif_addr |= MANTIS_GPIF_PCMCIAIOM; @@ -161,12 +179,12 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR); if (mantis_hif_sbuf_opdone_wait(ca) != 0) { - dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); mutex_unlock(&ca->ca_lock); return -EREMOTEIO; } data = mmread(MANTIS_GPIF_DIN); - dprintk(verbose, MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data); + dprintk(MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data); udelay(50); mutex_unlock(&ca->ca_lock); @@ -178,7 +196,7 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) struct mantis_pci *mantis = ca->ca_priv; u32 hif_addr = 0; - dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num); mutex_lock(&ca->ca_lock); hif_addr &= ~MANTIS_GPIF_PCMCIAREG; hif_addr &= ~MANTIS_GPIF_HIFRDWRN; @@ -190,11 +208,11 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) mmwrite(data, MANTIS_GPIF_DOUT); if (mantis_hif_write_wait(ca) != 0) { - dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); mutex_unlock(&ca->ca_lock); return -EREMOTEIO; } - dprintk(verbose, MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr); + dprintk(MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr); mutex_unlock(&ca->ca_lock); udelay(50); @@ -208,7 +226,7 @@ int mantis_hif_init(struct mantis_ca *ca) u32 irqcfg; slot[0].slave_cfg = 0x70773028; - dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num); + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num); mutex_lock(&ca->ca_lock); irqcfg = mmread(MANTIS_GPIF_IRQCFG); @@ -230,7 +248,7 @@ void mantis_hif_exit(struct mantis_ca *ca) struct mantis_pci *mantis = ca->ca_priv; u32 irqcfg; - dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num); + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num); mutex_lock(&ca->ca_lock); irqcfg = mmread(MANTIS_GPIF_IRQCFG); irqcfg &= ~MANTIS_MASK_BRRDY; diff --git a/drivers/media/dvb/mantis/mantis_hif.h b/drivers/media/dvb/mantis/mantis_hif.h index 7ef45cec19d6..f960c0aeacc4 100644 --- a/drivers/media/dvb/mantis/mantis_hif.h +++ b/drivers/media/dvb/mantis/mantis_hif.h @@ -26,4 +26,4 @@ #define MANTIS_HIF_IOMRD 3 #define MANTIS_HIF_IOMWR 4 -#endif // __MANTIS_HIF_H +#endif /* __MANTIS_HIF_H */ diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c index 45d9e6bd9628..ba55f0a9a10f 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.c +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -18,15 +18,20 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include -#include -#include -#include #include #include -#include -#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + #include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_i2c.h" #define I2C_HW_B_MANTIS 0x1c @@ -35,20 +40,21 @@ static int mantis_ack_wait(struct mantis_pci *mantis) int rc = 0; u32 timeout = 0; - if (wait_event_interruptible_timeout(mantis->i2c_wq, - mantis->mantis_int_stat & MANTIS_INT_I2CDONE, - msecs_to_jiffies(50)) == -ERESTARTSYS) { + if (wait_event_timeout(mantis->i2c_wq, + mantis->mantis_int_stat & MANTIS_INT_I2CDONE, + msecs_to_jiffies(50)) == -ERESTARTSYS) { - dprintk(verbose, MANTIS_DEBUG, 1, "Master !I2CDONE"); + dprintk(MANTIS_DEBUG, 1, "Master !I2CDONE"); rc = -EREMOTEIO; } + while (!(mantis->mantis_int_stat & MANTIS_INT_I2CRACK)) { - dprintk(verbose, MANTIS_DEBUG, 1, "Waiting for Slave RACK"); + dprintk(MANTIS_DEBUG, 1, "Waiting for Slave RACK"); mantis->mantis_int_stat = mmread(MANTIS_INT_STAT); msleep(5); timeout++; if (timeout > 500) { - dprintk(verbose, MANTIS_ERROR, 1, "Slave RACK Fail !"); + dprintk(MANTIS_ERROR, 1, "Slave RACK Fail !"); rc = -EREMOTEIO; break; } @@ -62,7 +68,7 @@ static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) { u32 rxd, i; - dprintk(verbose, MANTIS_INFO, 0, " %s: Address=[0x%02x] [ ", + dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] [ ", __func__, msg->addr); for (i = 0; i < msg->len; i++) { @@ -77,14 +83,14 @@ static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); mmwrite(rxd, MANTIS_I2CDATA_CTL); if (mantis_ack_wait(mantis) != 0) { - dprintk(verbose, MANTIS_DEBUG, 1, "ACK failed"); + dprintk(MANTIS_DEBUG, 1, "ACK failed"); return -EREMOTEIO; } rxd = mmread(MANTIS_I2CDATA_CTL); msg->buf[i] = (u8)((rxd >> 8) & 0xFF); - dprintk(verbose, MANTIS_INFO, 0, "%02x ", msg->buf[i]); + dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); } - dprintk(verbose, MANTIS_INFO, 0, "]\n"); + dprintk(MANTIS_INFO, 0, "]\n"); return 0; } @@ -94,11 +100,11 @@ static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg int i; u32 txd = 0; - dprintk(verbose, MANTIS_INFO, 0, " %s: Address=[0x%02x] [ ", + dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] [ ", __func__, msg->addr); for (i = 0; i < msg->len; i++) { - dprintk(verbose, MANTIS_INFO, 0, "%02x ", msg->buf[i]); + dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); txd = (msg->addr << 25) | (msg->buf[i] << 8) | MANTIS_I2C_RATE_3 | MANTIS_I2C_STOP @@ -110,11 +116,11 @@ static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); mmwrite(txd, MANTIS_I2CDATA_CTL); if (mantis_ack_wait(mantis) != 0) { - dprintk(verbose, MANTIS_DEBUG, 1, "ACK failed"); + dprintk(MANTIS_DEBUG, 1, "ACK failed"); return -EREMOTEIO; } } - dprintk(verbose, MANTIS_INFO, 0, "]\n"); + dprintk(MANTIS_INFO, 0, "]\n"); return 0; } @@ -154,43 +160,46 @@ static struct i2c_algorithm mantis_algo = { .functionality = mantis_i2c_func, }; -static struct i2c_adapter mantis_i2c_adapter = { - .owner = THIS_MODULE, - .name = "Mantis I2C", - .id = I2C_HW_B_MANTIS, - .class = I2C_CLASS_TV_DIGITAL, - .algo = &mantis_algo, -}; - int __devinit mantis_i2c_init(struct mantis_pci *mantis) { u32 intstat, intmask; struct i2c_adapter *i2c_adapter = &mantis->adapter; struct pci_dev *pdev = mantis->pdev; + init_waitqueue_head(&mantis->i2c_wq); mutex_init(&mantis->i2c_lock); - memcpy(i2c_adapter, &mantis_i2c_adapter, sizeof (mantis_i2c_adapter)); + strncpy(i2c_adapter->name, "Mantis I2C", sizeof (i2c_adapter->name)); i2c_set_adapdata(i2c_adapter, mantis); - i2c_adapter->dev.parent = &pdev->dev; + i2c_adapter->owner = THIS_MODULE; + i2c_adapter->class = I2C_CLASS_TV_DIGITAL; + i2c_adapter->algo = &mantis_algo; + i2c_adapter->algo_data = NULL; + i2c_adapter->id = I2C_HW_B_MANTIS; + i2c_adapter->timeout = 500; + i2c_adapter->retries = 3; + i2c_adapter->dev.parent = &pdev->dev; + mantis->i2c_rc = i2c_add_adapter(i2c_adapter); if (mantis->i2c_rc < 0) return mantis->i2c_rc; - dprintk(verbose, MANTIS_DEBUG, 1, "Initializing I2C .."); + dprintk(MANTIS_DEBUG, 1, "Initializing I2C .."); intstat = mmread(MANTIS_INT_STAT); intmask = mmread(MANTIS_INT_MASK); mmwrite(intstat, MANTIS_INT_STAT); mmwrite(intmask | MANTIS_INT_I2CDONE, MANTIS_INT_MASK); - dprintk(verbose, MANTIS_DEBUG, 1, "[0x%08x/%08x]", intstat, intmask); + dprintk(MANTIS_DEBUG, 1, "Status=<%02x> Mask=<%02x>", intstat, intmask); return 0; } +EXPORT_SYMBOL_GPL(mantis_i2c_init); int __devexit mantis_i2c_exit(struct mantis_pci *mantis) { - dprintk(verbose, MANTIS_DEBUG, 1, "Removing I2C adapter"); + dprintk(MANTIS_DEBUG, 1, "Removing I2C adapter"); return i2c_del_adapter(&mantis->adapter); } +EXPORT_SYMBOL_GPL(mantis_i2c_exit); diff --git a/drivers/media/dvb/mantis/mantis_i2c.h b/drivers/media/dvb/mantis/mantis_i2c.h new file mode 100644 index 000000000000..1e49ecfeee3e --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_i2c.h @@ -0,0 +1,7 @@ +#ifndef __MANTIS_I2C_H +#define __MANTIS_I2C_H + +extern int mantis_i2c_init(struct mantis_pci *mantis); +extern int mantis_i2c_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_I2C_H */ diff --git a/drivers/media/dvb/mantis/mantis_ioc.c b/drivers/media/dvb/mantis/mantis_ioc.c new file mode 100644 index 000000000000..4700088f0388 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_ioc.c @@ -0,0 +1,145 @@ +/* + Mantis PCI bridge driver + + Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include + +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_ioc.h" + +static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err; + struct i2c_msg msg[] = { + { .addr = 0x50, .flags = 0, .buf = data, .len = 1 }, + { .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length }, + }; + + err = i2c_transfer(adapter, msg, 2); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >", + err, data[0], data[1]); + + return err; + } + + return 0; +} + +static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) +{ + struct i2c_adapter *adapter = &mantis->adapter; + int err; + + struct i2c_msg msg = { .addr = 0x50, .flags = 0, .buf = data, .len = length }; + + err = i2c_transfer(adapter, &msg, 1); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: i2c write: < err=%i length=0x%02x d0=0x%02x, d1=0x%02x >", + err, length, data[0], data[1]); + + return err; + } + + return 0; +} + +int mantis_get_mac(struct mantis_pci *mantis) +{ + int err; + + mantis->mac_address[0] = 0x08; + + err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err); + + return err; + } + + dprintk(MANTIS_ERROR, 0, + " MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n", + mantis->mac_address[0], mantis->mac_address[1], + mantis->mac_address[2], mantis->mac_address[3], + mantis->mac_address[4], mantis->mac_address[5]); + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_get_mac); + +/* Turn the given bit on or off. */ +void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value) +{ + u32 cur; + + cur = mmread(MANTIS_GPIF_ADDR); + if (value) + mantis->gpio_status = cur | (1 << bitpos); + else + mantis->gpio_status = cur & (~(1 << bitpos)); + + mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR); + mmwrite(0x00, MANTIS_GPIF_DOUT); +} +EXPORT_SYMBOL_GPL(gpio_set_bits); + +int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl) +{ + u32 reg; + + reg = mmread(MANTIS_CONTROL); + switch (stream_ctl) { + case STREAM_TO_HIF: + dprintk(MANTIS_DEBUG, 1, "Set stream to HIF"); + reg &= 0xff - MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + reg |= MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + break; + + case STREAM_TO_CAM: + dprintk(MANTIS_DEBUG, 1, "Set stream to CAM"); + reg |= MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + reg &= 0xff - MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + break; + default: + dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl); + return -1; + } + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_stream_control); diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h index f9aaaa52f52c..f6030c9fba2d 100644 --- a/drivers/media/dvb/mantis/mantis_link.h +++ b/drivers/media/dvb/mantis/mantis_link.h @@ -58,7 +58,6 @@ struct mantis_ca { enum mantis_slot_state slot_state; -// struct dvb_device *ca_dev; void *ca_priv; struct dvb_ca_en50221 en50221; @@ -81,4 +80,4 @@ extern int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data); extern int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr); extern int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data); -#endif // __MANTIS_LINK_H +#endif /* __MANTIS_LINK_H */ diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c index d1eac4083fcc..5165a390e07a 100644 --- a/drivers/media/dvb/mantis/mantis_pci.c +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -18,6 +18,9 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include +#include +#include #include #include #include @@ -25,264 +28,149 @@ #include #include #include -#include "mantis_common.h" -#include "mantis_core.h" -#include "mantis_uart.h" +#include #include #include #include #include -unsigned int verbose = 1; -module_param(verbose, int, 0644); -MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)"); +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" -unsigned int devs; +#include +#include +#include +#include -#define PCI_VENDOR_ID_MANTIS 0x1822 -#define PCI_DEVICE_ID_MANTIS_R11 0x4e35 -#define DRIVER_NAME "Mantis" +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_pci.h" -static struct pci_device_id mantis_pci_table[] = { - { PCI_DEVICE(PCI_VENDOR_ID_MANTIS, PCI_DEVICE_ID_MANTIS_R11) }, - { 0 }, -}; +#define DRIVER_NAME "Mantis Core" -MODULE_DEVICE_TABLE(pci, mantis_pci_table); - -static irqreturn_t mantis_pci_irq(int irq, void *dev_id) -{ - u32 stat = 0, mask = 0, lstat = 0, mstat = 0; - u32 rst_stat = 0, rst_mask = 0; - - struct mantis_pci *mantis; - struct mantis_ca *ca; - - mantis = (struct mantis_pci *) dev_id; - if (unlikely(mantis == NULL)) { - dprintk(verbose, MANTIS_ERROR, 1, "Mantis == NULL"); - return IRQ_NONE; - } - ca = mantis->mantis_ca; - - stat = mmread(MANTIS_INT_STAT); - mask = mmread(MANTIS_INT_MASK); - mstat = lstat = stat & ~MANTIS_INT_RISCSTAT; - if (!(stat & mask)) - return IRQ_NONE; - - rst_mask = MANTIS_GPIF_WRACK | - MANTIS_GPIF_OTHERR | - MANTIS_SBUF_WSTO | - MANTIS_GPIF_EXTIRQ; - - rst_stat = mmread(MANTIS_GPIF_STATUS); - rst_stat &= rst_mask; - mmwrite(rst_stat, MANTIS_GPIF_STATUS); - - mantis->mantis_int_stat = stat; - mantis->mantis_int_mask = mask; - dprintk(verbose, MANTIS_DEBUG, 0, "=== Interrupts[%04x/%04x]= [", stat, mask); - if (stat & MANTIS_INT_RISCEN) { - dprintk(verbose, MANTIS_DEBUG, 0, "* DMA enabl *"); - } - if (stat & MANTIS_INT_IRQ0) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-0 *"); - mantis->gpif_status = rst_stat; - wake_up(&ca->hif_write_wq); - schedule_work(&ca->hif_evm_work); - } - if (stat & MANTIS_INT_IRQ1) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-1 *"); - schedule_work(&mantis->uart_work); - } - if (stat & MANTIS_INT_OCERR) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT OCERR *"); - } - if (stat & MANTIS_INT_PABORT) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT PABRT *"); - } - if (stat & MANTIS_INT_RIPERR) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT RIPRR *"); - } - if (stat & MANTIS_INT_PPERR) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT PPERR *"); - } - if (stat & MANTIS_INT_FTRGT) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT FTRGT *"); - } - if (stat & MANTIS_INT_RISCI) { - dprintk(verbose, MANTIS_DEBUG, 0, "* INT RISCI *"); - mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28; - tasklet_schedule(&mantis->tasklet); - } - if (stat & MANTIS_INT_I2CDONE) { - dprintk(verbose, MANTIS_DEBUG, 0, "* I2C DONE *"); - wake_up(&mantis->i2c_wq); - } - mmwrite(stat, MANTIS_INT_STAT); - stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE | - MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 | - MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 | - MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 | - MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 | - MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 | - MANTIS_INT_IRQ0 | MANTIS_INT_OCERR | - MANTIS_INT_PABORT | MANTIS_INT_RIPERR | - MANTIS_INT_PPERR | MANTIS_INT_FTRGT | - MANTIS_INT_RISCI); - - if (stat) - dprintk(verbose, MANTIS_DEBUG, 0, "* Unknown [%04x] *", stat); - - dprintk(verbose, MANTIS_DEBUG, 0, "] ===\n"); - - return IRQ_HANDLED; -} - - -static int __devinit mantis_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *mantis_pci_table) +int __devinit mantis_pci_init(struct mantis_pci *mantis) { u8 revision, latency; - struct mantis_pci *mantis; - int ret = 0; + struct mantis_hwconfig *config = mantis->hwconfig; + struct pci_dev *pdev = mantis->pdev; + int err, ret = 0; - mantis = kmalloc(sizeof (struct mantis_pci), GFP_KERNEL); - if (mantis == NULL) { - printk("%s: Out of memory\n", __func__); + dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n", + config->model_name, + config->dev_type, + mantis->pdev->bus->number, + PCI_SLOT(mantis->pdev->devfn), + PCI_FUNC(mantis->pdev->devfn)); + + err = pci_enable_device(pdev); + if (err != 0) { + ret = -ENODEV; + dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err); + goto fail0; + } + + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (err != 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err); ret = -ENOMEM; - goto err; - } - memset(mantis, 0, sizeof (struct mantis_pci)); - mantis->num = devs; - devs++; - - if (pci_enable_device(pdev)) { - dprintk(verbose, MANTIS_ERROR, 1, "Mantis PCI enable failed"); - ret = -ENODEV; - goto err; - } - mantis->mantis_addr = pci_resource_start(pdev, 0); - if (!request_mem_region(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0), DRIVER_NAME)) { - ret = -ENODEV; - goto err0; + goto fail1; } - mantis->mantis_mmio = ioremap(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - - if (!mantis->mantis_mmio) { - dprintk(verbose, MANTIS_ERROR, 1, "IO remap failed"); - ret = -ENODEV; - goto err1; - } - - // Clear and disable all interrupts at startup - // to avoid lockup situations - mmwrite(0x00, MANTIS_INT_MASK); - if (request_irq(pdev->irq, - mantis_pci_irq, - IRQF_SHARED, - DRIVER_NAME, - mantis) < 0) { - - dprintk(verbose, MANTIS_ERROR, 1, "Mantis IRQ reg failed"); - ret = -ENODEV; - goto err2; - } pci_set_master(pdev); - pci_set_drvdata(pdev, mantis); + + if (!request_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0), + DRIVER_NAME)) { + + dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !"); + ret = -ENODEV; + goto fail1; + } + + mantis->mmio = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + + if (!mantis->mmio) { + dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !"); + ret = -ENODEV; + goto fail2; + } + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency); pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision); mantis->latency = latency; mantis->revision = revision; - mantis->pdev = pdev; - mantis->subsystem_vendor = pdev->subsystem_vendor; - mantis->subsystem_device = pdev->subsystem_device; - init_waitqueue_head(&mantis->i2c_wq); - mantis_set_direction(mantis, 0); /* CAM bypass */ + dprintk(MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ", + mantis->revision, + mantis->pdev->subsystem_vendor, + mantis->pdev->subsystem_device); - if (!latency) - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 32); + dprintk(MANTIS_ERROR, 0, + "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n", + mantis->pdev->irq, + mantis->latency, + mantis->mantis_addr, + mantis->mmio); - dprintk(verbose, MANTIS_ERROR, 0, - "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n", - pdev->irq, mantis->latency, - mantis->mantis_addr, mantis->mantis_mmio); + err = request_irq(pdev->irq, + config->irq_handler, + IRQF_SHARED, + DRIVER_NAME, + mantis); - // No more PCI specific stuff ! - if (mantis_core_init(mantis) < 0) { - dprintk(verbose, MANTIS_ERROR, 1, "Mantis core init failed"); + if (err != 0) { + + dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err); ret = -ENODEV; - goto err2; + goto fail3; } - return 0; + pci_set_drvdata(pdev, mantis); + return ret; - // Error conditions .. -err2: - dprintk(verbose, MANTIS_DEBUG, 1, "Err: IO Unmap"); - if (mantis->mantis_mmio) - iounmap(mantis->mantis_mmio); -err1: - dprintk(verbose, MANTIS_DEBUG, 1, "Err: Release regions"); + /* Error conditions */ +fail3: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret); + if (mantis->mmio) + iounmap(mantis->mmio); + +fail2: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> releasing regions", ret); release_mem_region(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); + pci_resource_len(pdev, 0)); + +fail1: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> disabling device", ret); pci_disable_device(pdev); -err0: - dprintk(verbose, MANTIS_DEBUG, 1, "Err: Free"); - kfree(mantis); -err: - dprintk(verbose, MANTIS_DEBUG, 1, "Err:"); + +fail0: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> exiting", ret); + pci_set_drvdata(pdev, NULL); return ret; } +EXPORT_SYMBOL_GPL(mantis_pci_init); -static void __devexit mantis_pci_remove(struct pci_dev *pdev) +void __devexit mantis_pci_exit(struct mantis_pci *mantis) { - struct mantis_pci *mantis = pci_get_drvdata(pdev); - - if (mantis == NULL) { - dprintk(verbose, MANTIS_ERROR, 1, "Aeio, Mantis NULL ptr"); - return; - } - mantis_core_exit(mantis); - dprintk(verbose, MANTIS_ERROR, 1, "Removing -->Mantis irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p", - pdev->irq, mantis->latency, mantis->mantis_addr, - mantis->mantis_mmio); + struct pci_dev *pdev = mantis->pdev; + dprintk(MANTIS_NOTICE, 1, " mem: 0x%p", mantis->mmio); free_irq(pdev->irq, mantis); - pci_release_regions(pdev); - if (mantis_dma_exit(mantis) < 0) - dprintk(verbose, MANTIS_ERROR, 1, "DMA exit failed"); + if (mantis->mmio) { + iounmap(mantis->mmio); + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + } - pci_set_drvdata(pdev, NULL); pci_disable_device(pdev); - kfree(mantis); + pci_set_drvdata(pdev, NULL); } - -static struct pci_driver mantis_pci_driver = { - .name = DRIVER_NAME, - .id_table = mantis_pci_table, - .probe = mantis_pci_probe, - .remove = mantis_pci_remove, -}; - -static int __devinit mantis_pci_init(void) -{ - return pci_register_driver(&mantis_pci_driver); -} - -static void __devexit mantis_pci_exit(void) -{ - pci_unregister_driver(&mantis_pci_driver); -} - -module_init(mantis_pci_init); -module_exit(mantis_pci_exit); +EXPORT_SYMBOL_GPL(mantis_pci_exit); MODULE_DESCRIPTION("Mantis PCI DTV bridge driver"); MODULE_AUTHOR("Manu Abraham"); diff --git a/drivers/media/dvb/mantis/mantis_pci.h b/drivers/media/dvb/mantis/mantis_pci.h new file mode 100644 index 000000000000..5ce776ffcb32 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_pci.h @@ -0,0 +1,7 @@ +#ifndef __MANTIS_PCI_H +#define __MANTIS_PCI_H + +extern int mantis_pci_init(struct mantis_pci *mantis); +extern void mantis_pci_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_PCI_H */ diff --git a/drivers/media/dvb/mantis/mantis_pcmcia.c b/drivers/media/dvb/mantis/mantis_pcmcia.c index 4156a0820886..90ca356985eb 100644 --- a/drivers/media/dvb/mantis/mantis_pcmcia.c +++ b/drivers/media/dvb/mantis/mantis_pcmcia.c @@ -18,8 +18,22 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include + +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + #include "mantis_common.h" #include "mantis_link.h" /* temporary due to physical layer stuff */ +#include "mantis_reg.h" /* * If Slot state is already PLUG_IN event and we are called @@ -32,7 +46,7 @@ void mantis_event_cam_plugin(struct mantis_ca *ca) u32 gpif_irqcfg; if (ca->slot_state == MODULE_XTRACTED) { - dprintk(verbose, MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num); udelay(50); mmwrite(0xda000000, MANTIS_CARD_RESET); gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG); @@ -56,7 +70,7 @@ void mantis_event_cam_unplug(struct mantis_ca *ca) u32 gpif_irqcfg; if (ca->slot_state == MODULE_INSERTED) { - dprintk(verbose, MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num); udelay(50); mmwrite(0x00da0000, MANTIS_CARD_RESET); gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG); @@ -80,14 +94,14 @@ int mantis_pcmcia_init(struct mantis_ca *ca) card_stat = mmread(MANTIS_GPIF_IRQCFG); if (gpif_stat & MANTIS_GPIF_DETSTAT) { - dprintk(verbose, MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num); + dprintk(MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num); mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG); ca->slot_state = MODULE_INSERTED; dvb_ca_en50221_camchange_irq(&ca->en50221, 0, DVB_CA_EN50221_CAMCHANGE_INSERTED); } else { - dprintk(verbose, MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num); + dprintk(MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num); mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG); ca->slot_state = MODULE_XTRACTED; dvb_ca_en50221_camchange_irq(&ca->en50221, diff --git a/drivers/media/dvb/mantis/mantis_reg.h b/drivers/media/dvb/mantis/mantis_reg.h index 6f5cd4936763..0072e149a561 100644 --- a/drivers/media/dvb/mantis/mantis_reg.h +++ b/drivers/media/dvb/mantis/mantis_reg.h @@ -21,7 +21,7 @@ #ifndef __MANTIS_REG_H #define __MANTIS_REG_H -// Interrupts +/* Interrupts */ #define MANTIS_INT_STAT 0x00 #define MANTIS_INT_MASK 0x04 @@ -49,8 +49,12 @@ #define MANTIS_INT_RISCI (0x01 << 1) #define MANTIS_INT_I2CDONE (0x01 << 0) -// DMA +/* DMA */ #define MANTIS_DMA_CTL 0x08 +#define MANTIS_GPIF_RD (0xff << 24) +#define MANTIS_GPIF_WR (0xff << 16) +#define MANTIS_CPU_DO (0x01 << 10) +#define MANTIS_DRV_DO (0x01 << 9) #define MANTIS_I2C_RD (0x01 << 7) #define MANTIS_I2C_WR (0x01 << 6) #define MANTIS_DCAP_MODE (0x01 << 5) @@ -61,10 +65,16 @@ #define MANTIS_DCAP_EN (0x01 << 1) #define MANTIS_RISC_EN (0x01 << 0) +/* DEBUG */ +#define MANTIS_DEBUGREG 0x0c +#define MANTIS_DATINV (0x0e << 7) +#define MANTIS_TOP_DEBUGSEL (0x07 << 4) +#define MANTIS_PCMCIA_DEBUGSEL (0x0f << 0) + #define MANTIS_RISC_START 0x10 #define MANTIS_RISC_PC 0x14 -// I2C +/* I2C */ #define MANTIS_I2CDATA_CTL 0x18 #define MANTIS_I2C_RATE_1 (0x00 << 6) #define MANTIS_I2C_RATE_2 (0x01 << 6) @@ -73,6 +83,28 @@ #define MANTIS_I2C_STOP (0x01 << 5) #define MANTIS_I2C_PGMODE (0x01 << 3) +/* DATA */ +#define MANTIS_CMD_DATA_R1 0x20 +#define MANTIS_CMD_DATA_3 (0xff << 24) +#define MANTIS_CMD_DATA_2 (0xff << 16) +#define MANTIS_CMD_DATA_1 (0xff << 8) +#define MANTIS_CMD_DATA_0 (0xff << 0) + +#define MANTIS_CMD_DATA_R2 0x24 +#define MANTIS_CMD_DATA_7 (0xff << 24) +#define MANTIS_CMD_DATA_6 (0xff << 16) +#define MANTIS_CMD_DATA_5 (0xff << 8) +#define MANTIS_CMD_DATA_4 (0xff << 0) + +#define MANTIS_CONTROL 0x28 +#define MANTIS_DET (0x01 << 7) +#define MANTIS_DAT_CF_EN (0x01 << 6) +#define MANTIS_ACS (0x03 << 4) +#define MANTIS_VCCEN (0x01 << 3) +#define MANTIS_BYPASS (0x01 << 2) +#define MANTIS_MRST (0x01 << 1) +#define MANTIS_CRST_INT (0x01 << 0) + #define MANTIS_GPIF_CFGSLA 0x84 #define MANTIS_GPIF_WAITSMPL (0x07 << 28) #define MANTIS_GPIF_BYTEADDRSUB (0x01 << 25) @@ -162,4 +194,4 @@ #define MANTIS_GPIF_LOGICRD (0xffff << 16) #define MANTIS_GPIF_LOGICRW (0xffff << 0) -#endif //__MANTIS_REG_H +#endif /* __MANTIS_REG_H */ diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c index 786fcc339117..fb423b0a58fd 100644 --- a/drivers/media/dvb/mantis/mantis_uart.c +++ b/drivers/media/dvb/mantis/mantis_uart.c @@ -1,5 +1,20 @@ +#include #include + +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + #include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_uart.h" struct mantis_uart_params { enum mantis_baud baud_rate; @@ -18,20 +33,20 @@ int mantis_uart_read(struct mantis_pci *mantis, u8 *data) for (i = 0; i < (config->bytes + 1); i++) { if (stat & MANTIS_UART_RXFIFO_FULL) { - dprintk(verbose, MANTIS_ERROR, 1, "RX Fifo FULL"); + dprintk(MANTIS_ERROR, 1, "RX Fifo FULL"); } data[i] = mmread(MANTIS_UART_RXD) & 0x3f; stat = mmread(MANTIS_UART_STAT); - dprintk(verbose, MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f); + dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f); if (data[i] & (1 << 7)) { - dprintk(verbose, MANTIS_ERROR, 1, "UART framing error"); + dprintk(MANTIS_ERROR, 1, "UART framing error"); return -EINVAL; } if (data[i] & (1 << 6)) { - dprintk(verbose, MANTIS_ERROR, 1, "UART parity error"); + dprintk(MANTIS_ERROR, 1, "UART parity error"); return -EINVAL; } } @@ -46,14 +61,14 @@ static void mantis_uart_work(struct work_struct *work) u8 buf[16]; int i; - dprintk(verbose, MANTIS_DEBUG, 1, "UART read"); + dprintk(MANTIS_DEBUG, 1, "UART read"); mantis_uart_read(mantis, buf); - dprintk(verbose, MANTIS_DEBUG, 1, "UART: "); + dprintk(MANTIS_DEBUG, 1, "UART: "); for (i = 0; i < (config->bytes + 1); i++) - dprintk(verbose, MANTIS_DEBUG, 0, "<%02x> ", buf[i]); + dprintk(MANTIS_DEBUG, 0, "<%02x> ", buf[i]); - dprintk(verbose, MANTIS_DEBUG, 0, "\n"); + dprintk(MANTIS_DEBUG, 0, "\n"); } static int mantis_uart_setup(struct mantis_pci *mantis, @@ -64,7 +79,7 @@ static int mantis_uart_setup(struct mantis_pci *mantis, u32 reg; - dprintk(verbose, MANTIS_DEBUG, 1, "Set Parity <%s> Baud Rate <%s>", + dprintk(MANTIS_DEBUG, 1, "Set Parity <%s> Baud Rate <%s>", parity[params->parity], rates[params->baud_rate]); @@ -102,7 +117,7 @@ int mantis_uart_init(struct mantis_pci *mantis) struct mantis_hwconfig *config = mantis->hwconfig; struct mantis_uart_params params; - dprintk(verbose, MANTIS_DEBUG, 1, "Initializing UART .."); + dprintk(MANTIS_DEBUG, 1, "Initializing UART .."); /* default parity: */ params.baud_rate = config->baud_rate; params.parity = config->parity; @@ -131,9 +146,11 @@ int mantis_uart_init(struct mantis_pci *mantis) return 0; } +EXPORT_SYMBOL_GPL(mantis_uart_init); void mantis_uart_exit(struct mantis_pci *mantis) { /* disable interrupt */ mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL); } +EXPORT_SYMBOL_GPL(mantis_uart_exit); diff --git a/drivers/media/dvb/mantis/mantis_uart.h b/drivers/media/dvb/mantis/mantis_uart.h index e9f938d37c3a..0a42cd01ab22 100644 --- a/drivers/media/dvb/mantis/mantis_uart.h +++ b/drivers/media/dvb/mantis/mantis_uart.h @@ -56,4 +56,4 @@ struct mantis_pci; extern int mantis_uart_init(struct mantis_pci *mantis); extern void mantis_uart_exit(struct mantis_pci *mantis); -#endif // __MANTIS_UART_H +#endif /* __MANTIS_UART_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c index 64cdfb8b709b..f2092ce9c4be 100644 --- a/drivers/media/dvb/mantis/mantis_vp1033.c +++ b/drivers/media/dvb/mantis/mantis_vp1033.c @@ -18,6 +18,18 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "stv0299.h" #include "mantis_common.h" #include "mantis_vp1033.h" @@ -66,47 +78,21 @@ u8 lgtdqcs001f_inittab[] = { 0xff, 0xff, }; -struct stv0299_config lgtdqcs001f_config = { - .demod_address = 0x68, - .inittab = lgtdqcs001f_inittab, - .mclk = 88000000UL, -// .invert = 0, - .invert = 1, -// .enhanced_tuning = 0, - .skip_reinit = 0, -// .lock_output = STV0229_LOCKOUTPUT_0, - .volt13_op0_op1 = STV0299_VOLT13_OP0, - .min_delay_ms = 100, - .set_symbol_rate = lgtdqcs001f_set_symbol_rate, -// .pll_set = lgtdqcs001f_pll_set, -}; - #define MANTIS_MODEL_NAME "VP-1033" #define MANTIS_DEV_TYPE "DVB-S/DSS" -struct mantis_hwconfig vp1033_mantis_config = { - .model_name = MANTIS_MODEL_NAME, - .dev_type = MANTIS_DEV_TYPE, - .ts_size = MANTIS_TS_204, - .baud_rate = MANTIS_BAUD_9600, - .parity = MANTIS_PARITY_NONE, - .bytes = 0, -}; - int lgtdqcs001f_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { + struct mantis_pci *mantis = fe->dvb->priv; + struct i2c_adapter *adapter = &mantis->adapter; + u8 buf[4]; u32 div; - struct mantis_pci *mantis = fe->dvb->priv; - struct i2c_msg msg = { - .addr = 0x61, - .flags = 0, - .buf = buf, - .len = sizeof (buf) - }; + struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof (buf) }; + div = params->frequency / 250; buf[0] = (div >> 8) & 0x7f; @@ -118,8 +104,8 @@ int lgtdqcs001f_tuner_set(struct dvb_frontend *fe, buf[3] |= 0x04; else buf[3] &= ~0x04; - if (i2c_transfer(&mantis->adapter, &msg, 1) < 0) { - dprintk(verbose, MANTIS_ERROR, 1, "Write: I2C Transfer failed"); + if (i2c_transfer(adapter, &msg, 1) < 0) { + dprintk(MANTIS_ERROR, 1, "Write: I2C Transfer failed"); return -EIO; } msleep_interruptible(100); @@ -161,3 +147,49 @@ int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe, return 0; } + +struct stv0299_config lgtdqcs001f_config = { + .demod_address = 0x68, + .inittab = lgtdqcs001f_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = lgtdqcs001f_set_symbol_rate, +}; + +static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)"); + fe = stv0299_attach(&lgtdqcs001f_config, adapter); + + if (fe) { + fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set; + dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x", + lgtdqcs001f_config.demod_address); + + dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success"); + } else { + return -1; + } + + mantis->fe = fe; + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp1033_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp1033_frontend_init, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp1033.h b/drivers/media/dvb/mantis/mantis_vp1033.h index e24570659d55..2c18d2153242 100644 --- a/drivers/media/dvb/mantis/mantis_vp1033.h +++ b/drivers/media/dvb/mantis/mantis_vp1033.h @@ -21,19 +21,10 @@ #ifndef __MANTIS_VP1033_H #define __MANTIS_VP1033_H -#include "dvb_frontend.h" #include "mantis_common.h" -#include "stv0299.h" #define MANTIS_VP_1033_DVB_S 0x0016 -extern struct stv0299_config lgtdqcs001f_config; -extern struct mantis_hwconfig vp1033_mantis_config; +extern struct mantis_hwconfig vp1033_config; -extern int lgtdqcs001f_tuner_set(struct dvb_frontend *fe, - struct dvb_frontend_parameters *params); - -extern int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio); - - -#endif // __MANTIS_VP1033_H +#endif /* __MANTIS_VP1033_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c index 28f3420b2312..40778ec8f460 100644 --- a/drivers/media/dvb/mantis/mantis_vp1034.c +++ b/drivers/media/dvb/mantis/mantis_vp1034.c @@ -18,10 +18,24 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include "mantis_common.h" -#include "mantis_vp1034.h" +#include +#include +#include +#include -struct mb86a16_config vp1034_config = { +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mb86a16.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_vp1034.h" +#include "mantis_reg.h" + +struct mb86a16_config vp1034_mb86a16_config = { .demod_address = 0x08, .set_voltage = vp1034_set_voltage, }; @@ -29,38 +43,62 @@ struct mb86a16_config vp1034_config = { #define MANTIS_MODEL_NAME "VP-1034" #define MANTIS_DEV_TYPE "DVB-S/DSS" -struct mantis_hwconfig vp1034_mantis_config = { - .model_name = MANTIS_MODEL_NAME, - .dev_type = MANTIS_DEV_TYPE, - .ts_size = MANTIS_TS_204, - .baud_rate = MANTIS_BAUD_9600, - .parity = MANTIS_PARITY_NONE, - .bytes = 0, -}; - int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { struct mantis_pci *mantis = fe->dvb->priv; switch (voltage) { case SEC_VOLTAGE_13: - dprintk(verbose, MANTIS_ERROR, 1, "Polarization=[13V]"); + dprintk(MANTIS_ERROR, 1, "Polarization=[13V]"); gpio_set_bits(mantis, 13, 1); gpio_set_bits(mantis, 14, 0); break; case SEC_VOLTAGE_18: - dprintk(verbose, MANTIS_ERROR, 1, "Polarization=[18V]"); + dprintk(MANTIS_ERROR, 1, "Polarization=[18V]"); gpio_set_bits(mantis, 13, 1); gpio_set_bits(mantis, 14, 1); break; case SEC_VOLTAGE_OFF: - dprintk(verbose, MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN"); + dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN"); break; default: - dprintk(verbose, MANTIS_ERROR, 1, "Invalid = (%d)", (u32 ) voltage); + dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32 ) voltage); return -EINVAL; } mmwrite(0x00, MANTIS_GPIF_DOUT); return 0; } + +static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)"); + fe = mb86a16_attach(&vp1034_mb86a16_config, adapter); + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found MB86A16 DVB-S/DSS frontend @0x%02x", + vp1034_mb86a16_config.demod_address); + + } else { + return -1; + } + + mantis->fe = fe; + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp1034_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp1034_frontend_init, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp1034.h b/drivers/media/dvb/mantis/mantis_vp1034.h index 21948573b087..30269129066a 100644 --- a/drivers/media/dvb/mantis/mantis_vp1034.h +++ b/drivers/media/dvb/mantis/mantis_vp1034.h @@ -23,13 +23,11 @@ #include "dvb_frontend.h" #include "mantis_common.h" -#include "mb86a16.h" #define MANTIS_VP_1034_DVB_S 0x0014 -extern struct mantis_hwconfig vp1034_mantis_config; -extern struct mb86a16_config vp1034_config; +extern struct mantis_hwconfig vp1034_config; extern int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage); -#endif // __MANTIS_VP1034_H +#endif /* __MANTIS_VP1034_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c index 90df80b80e11..1181fad3b27b 100644 --- a/drivers/media/dvb/mantis/mantis_vp1041.c +++ b/drivers/media/dvb/mantis/mantis_vp1041.c @@ -18,24 +18,31 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + #include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" #include "mantis_vp1041.h" #include "stb0899_reg.h" +#include "stb0899_drv.h" #include "stb0899_cfg.h" #include "stb6100_cfg.h" +#include "stb6100.h" +#include "lnbp21.h" #define MANTIS_MODEL_NAME "VP-1041" #define MANTIS_DEV_TYPE "DSS/DVB-S/DVB-S2" -struct mantis_hwconfig vp1041_mantis_config = { - .model_name = MANTIS_MODEL_NAME, - .dev_type = MANTIS_DEV_TYPE, - .ts_size = MANTIS_TS_188, - .baud_rate = MANTIS_BAUD_9600, - .parity = MANTIS_PARITY_NONE, - .bytes = 0, -}; - static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = { // 0x0000000b , /* SYSREG */ @@ -258,7 +265,7 @@ static const struct stb0899_s1_reg vp1041_stb0899_s1_init_3[] = { { 0xffff , 0xff }, }; -struct stb0899_config vp1041_config = { +struct stb0899_config vp1041_stb0899_config = { .init_dev = vp1041_stb0899_s1_init_1, .init_s2_demod = stb0899_s2_init_2, .init_s1_demod = vp1041_stb0899_s1_init_3, @@ -299,3 +306,55 @@ struct stb6100_config vp1041_stb6100_config = { .tuner_address = 0x60, .refclock = 27000000, }; + +static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + mantis->fe = stb0899_attach(&vp1041_stb0899_config, adapter); + if (mantis->fe) { + dprintk(MANTIS_ERROR, 1, + "found STB0899 DVB-S/DVB-S2 frontend @0x%02x", + vp1041_stb0899_config.demod_address); + + if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, adapter)) { + if (!lnbp21_attach(mantis->fe, adapter, 0, 0)) { + printk("%s: No LNBP21 found!\n", __func__); + } + } + } else { + return -EREMOTEIO; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + + + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp1041_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp1041_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp1041.h b/drivers/media/dvb/mantis/mantis_vp1041.h index 2cc83a6e5996..1ae5b3de8081 100644 --- a/drivers/media/dvb/mantis/mantis_vp1041.h +++ b/drivers/media/dvb/mantis/mantis_vp1041.h @@ -21,17 +21,13 @@ #ifndef __MANTIS_VP1041_H #define __MANTIS_VP1041_H -#include "dvb_frontend.h" #include "mantis_common.h" -#include "stb0899_drv.h" -#include "stb6100.h" -#include "lnbp21.h" #define MANTIS_VP_1041_DVB_S2 0x0031 -#define TECHNISAT_SKYSTAR_HD2 0x0001 +#define SKYSTAR_HD2_10 0x0001 +#define SKYSTAR_HD2_20 0x0003 +#define CINERGY_S2_PCI_HD 0x1179 -extern struct mantis_hwconfig vp1041_mantis_config; -extern struct stb0899_config vp1041_config; -extern struct stb6100_config vp1041_stb6100_config; +extern struct mantis_hwconfig vp1041_config; -#endif // __MANTIS_VP1041_H +#endif /* __MANTIS_VP1041_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c index 1171e69b7e64..877329175d0f 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.c +++ b/drivers/media/dvb/mantis/mantis_vp2033.c @@ -18,48 +18,59 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "tda1002x.h" #include "mantis_common.h" #include "mantis_vp2033.h" #define MANTIS_MODEL_NAME "VP-2033" #define MANTIS_DEV_TYPE "DVB-C" -struct mantis_hwconfig vp2033_mantis_config = { - .model_name = MANTIS_MODEL_NAME, - .dev_type = MANTIS_DEV_TYPE, - .ts_size = MANTIS_TS_204, - .baud_rate = MANTIS_BAUD_9600, - .parity = MANTIS_PARITY_NONE, - .bytes = 0, -}; - -struct tda1002x_config philips_cu1216_config = { +struct tda1002x_config vp2033_tda1002x_cu1216_config = { .demod_address = 0x18 >> 1, .invert = 1, }; -u8 read_pwm(struct mantis_pci *mantis) +struct tda10023_config vp2033_tda10023_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; + +static u8 read_pwm(struct mantis_pci *mantis) { + struct i2c_adapter *adapter = &mantis->adapter; + u8 b = 0xff; u8 pwm; struct i2c_msg msg[] = { - {.addr = 0x50,.flags = 0,.buf = &b,.len = 1}, - {.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} + {.addr = 0x50, .flags = 0, .buf = &b, .len = 1}, + {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1} }; - if ((i2c_transfer(&mantis->adapter, msg, 2) != 2) + if ((i2c_transfer(adapter, msg, 2) != 2) || (pwm == 0xff)) pwm = 0x48; return pwm; } -int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { struct mantis_pci *mantis = fe->dvb->priv; + struct i2c_adapter *adapter = &mantis->adapter; u8 buf[6]; - struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) }; + struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof (buf) }; int i; #define CU1216_IF 36125000 @@ -78,7 +89,7 @@ int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parame if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&mantis->adapter, &msg, 1) != 1) + if (i2c_transfer(adapter, &msg, 1) != 1) return -EIO; /* wait for the pll lock */ @@ -88,7 +99,7 @@ int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parame if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&mantis->adapter, &msg, 1) == 1 && (buf[0] & 0x40)) + if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40)) break; msleep(10); @@ -102,8 +113,58 @@ int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parame if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&mantis->adapter, &msg, 1) != 1) + if (i2c_transfer(adapter, &msg, 1) != 1) return -EIO; return 0; } + +static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); + fe = tda10021_attach(&vp2033_tda1002x_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", + vp2033_tda1002x_cu1216_config.demod_address); + } else { + fe = tda10023_attach(&vp2033_tda10023_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + vp2033_tda1002x_cu1216_config.demod_address); + } + } + + if (fe) { + fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; + dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + } else { + return -1; + } + + mantis->fe = fe; + dprintk(MANTIS_DEBUG, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp2033_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp2033_frontend_init, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp2033.h b/drivers/media/dvb/mantis/mantis_vp2033.h index fcf8b85be941..e6c5fe80f726 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.h +++ b/drivers/media/dvb/mantis/mantis_vp2033.h @@ -21,17 +21,10 @@ #ifndef __MANTIS_VP2033_H #define __MANTIS_VP2033_H -#include "dvb_frontend.h" #include "mantis_common.h" -#include "tda1002x.h" #define MANTIS_VP_2033_DVB_C 0x0008 -extern struct tda1002x_config philips_cu1216_config; -extern struct mantis_hwconfig vp2033_mantis_config; +extern struct mantis_hwconfig vp2033_config; -extern int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params); - -extern u8 read_pwm(struct mantis_pci *mantis); - -#endif // __MANTIS_VP2033_H +#endif /* __MANTIS_VP2033_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c index ce73d6beb5c6..51b082f7f917 100644 --- a/drivers/media/dvb/mantis/mantis_vp2040.c +++ b/drivers/media/dvb/mantis/mantis_vp2040.c @@ -18,22 +18,153 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "tda1002x.h" #include "mantis_common.h" #include "mantis_vp2040.h" #define MANTIS_MODEL_NAME "VP-2040" #define MANTIS_DEV_TYPE "DVB-C" -struct mantis_hwconfig vp2040_mantis_config = { +struct tda1002x_config vp2040_tda1002x_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; + +struct tda10023_config vp2040_tda10023_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; + +static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + struct mantis_pci *mantis = fe->dvb->priv; + struct i2c_adapter *adapter = &mantis->adapter; + + u8 buf[6]; + struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof (buf) }; + int i; + +#define CU1216_IF 36125000 +#define TUNER_MUL 62500 + + u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0xce; + buf[3] = (params->frequency < 150000000 ? 0x01 : + params->frequency < 445000000 ? 0x02 : 0x04); + buf[4] = 0xde; + buf[5] = 0x20; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) != 1) + return -EIO; + + /* wait for the pll lock */ + msg.flags = I2C_M_RD; + msg.len = 1; + for (i = 0; i < 20; i++) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40)) + break; + + msleep(10); + } + + /* switch the charge pump to the lower current */ + msg.flags = 0; + msg.len = 2; + msg.buf = &buf[2]; + buf[2] &= ~0x40; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) != 1) + return -EIO; + + return 0; +} + +static u8 read_pwm(struct mantis_pci *mantis) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + u8 b = 0xff; + u8 pwm; + struct i2c_msg msg[] = { + {.addr = 0x50, .flags = 0, .buf = &b, .len = 1}, + {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1} + }; + + if ((i2c_transfer(adapter, msg, 2) != 2) + || (pwm == 0xff)) + pwm = 0x48; + + return pwm; +} + +static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); + fe = tda10021_attach(&vp2040_tda1002x_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", + vp2040_tda1002x_cu1216_config.demod_address); + } else { + fe = tda10023_attach(&vp2040_tda10023_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + vp2040_tda1002x_cu1216_config.demod_address); + } + } + + if (fe) { + fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; + dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + } else { + return -1; + } + + mantis->fe = fe; + dprintk(MANTIS_DEBUG, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp2040_config = { .model_name = MANTIS_MODEL_NAME, .dev_type = MANTIS_DEV_TYPE, .ts_size = MANTIS_TS_204, + .baud_rate = MANTIS_BAUD_9600, .parity = MANTIS_PARITY_NONE, .bytes = 0, -}; -struct tda10023_config tda10023_cu1216_config = { - .demod_address = 0x18 >> 1, - .invert = 1, + .frontend_init = vp2040_frontend_init, }; diff --git a/drivers/media/dvb/mantis/mantis_vp2040.h b/drivers/media/dvb/mantis/mantis_vp2040.h index c7457543d8b0..d125e219b685 100644 --- a/drivers/media/dvb/mantis/mantis_vp2040.h +++ b/drivers/media/dvb/mantis/mantis_vp2040.h @@ -21,15 +21,12 @@ #ifndef __MANTIS_VP2040_H #define __MANTIS_VP2040_H -#include "dvb_frontend.h" #include "mantis_common.h" -#include "tda1002x.h" #define MANTIS_VP_2040_DVB_C 0x0043 -#define TERRATEC_CINERGY_C_PCI 0x1178 -#define TECHNISAT_CABLESTAR_HD2 0x0002 +#define CINERGY_C 0x1178 +#define CABLESTAR_HD2 0x0002 -extern struct tda10023_config tda10023_cu1216_config; -extern struct mantis_hwconfig vp2040_mantis_config; +extern struct mantis_hwconfig vp2040_config; -#endif //__MANTIS_VP2040_H +#endif /* __MANTIS_VP2040_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c index 9ca8040489dd..4b974eeefa9e 100644 --- a/drivers/media/dvb/mantis/mantis_vp3030.c +++ b/drivers/media/dvb/mantis/mantis_vp3030.c @@ -18,6 +18,18 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "zl10353.h" #include "mantis_common.h" #include "mantis_vp3030.h" @@ -28,15 +40,6 @@ struct zl10353_config mantis_vp3030_config = { #define MANTIS_MODEL_NAME "VP-3030" #define MANTIS_DEV_TYPE "DVB-T" -struct mantis_hwconfig vp3030_mantis_config = { - .model_name = MANTIS_MODEL_NAME, - .dev_type = MANTIS_DEV_TYPE, - .ts_size = MANTIS_TS_188, - .baud_rate = MANTIS_BAUD_9600, - .parity = MANTIS_PARITY_NONE, - .bytes = 0, -}; - int panasonic_en57h12d5_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { @@ -63,3 +66,31 @@ int panasonic_en57h12d5_set_params(struct dvb_frontend *fe, return 0; } + +static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); + fe = zl10353_attach(&mantis_vp3030_config, adapter); + + if (!fe) + return -1; + + mantis->fe = fe; + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp3030_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp3030_frontend_init, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp3030.h b/drivers/media/dvb/mantis/mantis_vp3030.h index acc50a48e18f..0a110ba5c1db 100644 --- a/drivers/media/dvb/mantis/mantis_vp3030.h +++ b/drivers/media/dvb/mantis/mantis_vp3030.h @@ -21,14 +21,10 @@ #ifndef __MANTIS_VP3030_H #define __MANTIS_VP3030_H -#include "dvb_frontend.h" #include "mantis_common.h" -#include "dvb-pll.h" -#include "zl10353.h" #define MANTIS_VP_3030_DVB_T 0x0024 -extern struct zl10353_config mantis_vp3030_config; -extern struct mantis_hwconfig vp3030_mantis_config; +extern struct mantis_hwconfig vp3030_config; -#endif // __MANTIS_VP3030_H +#endif /* __MANTIS_VP3030_H */ From ad0ac434cb3b34640a4e81d7e80a1512c6e40253 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:41:52 -0300 Subject: [PATCH 1117/1626] V4L/DVB (13796): [Mantis] Add missing file in previous commit Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_ioc.h | 31 +++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 drivers/media/dvb/mantis/mantis_ioc.h diff --git a/drivers/media/dvb/mantis/mantis_ioc.h b/drivers/media/dvb/mantis/mantis_ioc.h new file mode 100644 index 000000000000..20526406723b --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_ioc.h @@ -0,0 +1,31 @@ +#ifndef __MANTIS_IOC_H +#define __MANTIS_IOC_H + +#define GPIF_A00 0x00 +#define GPIF_A01 0x01 +#define GPIF_A02 0x02 +#define GPIF_A03 0x03 +#define GPIF_A04 0x04 +#define GPIF_A05 0x05 +#define GPIF_A06 0x06 +#define GPIF_A07 0x07 +#define GPIF_A08 0x08 +#define GPIF_A09 0x09 +#define GPIF_A10 0x0a +#define GPIF_A11 0x0b + +#define GPIF_A12 0x0c +#define GPIF_A13 0x0d +#define GPIF_A14 0x0e + +enum mantis_stream_control { + STREAM_TO_HIF = 0, + STREAM_TO_CAM +}; + +extern int mantis_get_mac(struct mantis_pci *mantis); +extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value); + +extern int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl); + +#endif /* __MANTIS_IOC_H */ From 3e978a8284080d801d20cda377d9cf7c12fe68b9 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:56:35 -0300 Subject: [PATCH 1118/1626] V4L/DVB (13797): [Mantis/Hopper/TDA665x] Large overhaul, * Initial go at VP-3028, VP-3030 devices. * I2C communication improvements, * Add TDA665x support Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/Kconfig | 11 + drivers/media/dvb/frontends/Makefile | 1 + drivers/media/dvb/frontends/tda665x.c | 257 +++++++++++++++++++++++ drivers/media/dvb/frontends/tda665x.h | 52 +++++ drivers/media/dvb/mantis/hopper_cards.c | 1 - drivers/media/dvb/mantis/mantis_cards.c | 11 +- drivers/media/dvb/mantis/mantis_dma.c | 3 +- drivers/media/dvb/mantis/mantis_dvb.c | 22 +- drivers/media/dvb/mantis/mantis_i2c.c | 141 ++++++++----- drivers/media/dvb/mantis/mantis_i2c.h | 3 + drivers/media/dvb/mantis/mantis_ioc.c | 42 ++-- drivers/media/dvb/mantis/mantis_vp3030.c | 52 +++-- 12 files changed, 479 insertions(+), 117 deletions(-) create mode 100644 drivers/media/dvb/frontends/tda665x.c create mode 100644 drivers/media/dvb/frontends/tda665x.h diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index a3b8b697349b..7820ca084b15 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -587,6 +587,17 @@ config DVB_ATBM8830 help A DMB-TH tuner module. Say Y when you want to support this frontend. +config DVB_TDA665x + tristate "TDA665x tuner" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + Support for tuner modules based on Philips TDA6650/TDA6651 chips. + Say Y when you want to support this chip. + + Currently supported tuners: + * Panasonic ENV57H12D5 (ET-50DT) + comment "Tools to develop new frontends" config DVB_DUMMY_FE diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 47575cc7b699..59f7b8803554 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -64,6 +64,7 @@ obj-$(CONFIG_DVB_TDA10048) += tda10048.o obj-$(CONFIG_DVB_TUNER_CX24113) += cx24113.o obj-$(CONFIG_DVB_S5H1411) += s5h1411.o obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o +obj-$(CONFIG_DVB_TDA665x) += tda665x.o obj-$(CONFIG_DVB_LGS8GXX) += lgs8gxx.o obj-$(CONFIG_DVB_ATBM8830) += atbm8830.o obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o diff --git a/drivers/media/dvb/frontends/tda665x.c b/drivers/media/dvb/frontends/tda665x.c new file mode 100644 index 000000000000..0732a2d38e10 --- /dev/null +++ b/drivers/media/dvb/frontends/tda665x.c @@ -0,0 +1,257 @@ +/* + TDA665x tuner driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include + +#include "dvb_frontend.h" +#include "tda665x.h" + +struct tda665x_state { + struct dvb_frontend *fe; + struct i2c_adapter *i2c; + const struct tda665x_config *config; + + u32 frequency; + u32 bandwidth; +}; + +static int tda665x_read(struct tda665x_state *state, u8 *buf) +{ + const struct tda665x_config *config = state->config; + int err = 0; + struct i2c_msg msg = { .addr = config->addr, .flags = I2C_M_RD, .buf = buf, .len = 2 }; + + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) + goto exit; + + return err; +exit: + printk("%s: I/O Error err=<%d>\n", __func__, err); + return err; +} + +static int tda665x_write(struct tda665x_state *state, u8 *buf, u8 length) +{ + const struct tda665x_config *config = state->config; + int err = 0; + struct i2c_msg msg = { .addr = config->addr, .flags = 0, .buf = buf, .len = length }; + + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) + goto exit; + + return err; +exit: + printk("%s: I/O Error err=<%d>\n", __func__, err); + return err; +} + +static int tda665x_get_state(struct dvb_frontend *fe, + enum tuner_param param, + struct tuner_state *tstate) +{ + struct tda665x_state *state = fe->tuner_priv; + int err = 0; + + switch (param) { + case DVBFE_TUNER_FREQUENCY: + tstate->frequency = state->frequency; + break; + case DVBFE_TUNER_BANDWIDTH: + break; + default: + printk("%s: Unknown parameter (param=%d)\n", __func__, param); + err = -EINVAL; + break; + } + + return err; +} + +static int tda665x_get_status(struct dvb_frontend *fe, u32 *status) +{ + struct tda665x_state *state = fe->tuner_priv; + u8 result = 0; + int err = 0; + + *status = 0; + + err = tda665x_read(state, &result); + if (err < 0) + goto exit; + + if ((result >> 6) & 0x01) { + printk("%s: Tuner Phase Locked\n", __func__); + *status = 1; + } + + return err; +exit: + printk("%s: I/O Error\n", __func__); + return err; +} + +static int tda665x_set_state(struct dvb_frontend *fe, + enum tuner_param param, + struct tuner_state *tstate) +{ + struct tda665x_state *state = fe->tuner_priv; + const struct tda665x_config *config = state->config; + u32 frequency, status = 0; + u8 buf[4]; + int err = 0; + + if (param & DVBFE_TUNER_FREQUENCY) { + + frequency = tstate->frequency; + if ((frequency < config->frequency_max) || (frequency > config->frequency_min)) { + printk("%s: Frequency beyond limits, frequency=%d\n", __func__, frequency); + return -EINVAL; + } + + frequency += config->frequency_offst; + frequency *= config->ref_multiplier; + frequency += config->ref_divider >> 1; + frequency /= config->ref_divider; + + buf[0] = (u8 ) (frequency & 0x7f00) >> 8; + buf[1] = (u8 ) (frequency & 0x00ff) >> 0; + buf[2] = 0x80 | 0x40 | 0x02; + buf[3] = 0x00; + + /* restore frequency */ + frequency = tstate->frequency; + + if (frequency < 153000000) { + /* VHF-L */ + buf[3] |= 0x01; /* fc, Low Band, 47 - 153 MHz */ + if (frequency < 68000000) + buf[3] |= 0x40; /* 83uA */ + if (frequency < 1040000000) + buf[3] |= 0x60; /* 122uA */ + if (frequency < 1250000000) + buf[3] |= 0x80; /* 163uA */ + else + buf[3] |= 0xa0; /* 254uA */ + } else if (frequency < 438000000) { + /* VHF-H */ + buf[3] |= 0x02; /* fc, Mid Band, 153 - 438 MHz */ + if (frequency < 230000000) + buf[3] |= 0x40; + if (frequency < 300000000) + buf[3] |= 0x60; + else + buf[3] |= 0x80; + } else { + /* UHF */ + buf[3] |= 0x04; /* fc, High Band, 438 - 862 MHz */ + if (frequency < 470000000) + buf[3] |= 0x60; + if (frequency < 526000000) + buf[3] |= 0x80; + else + buf[3] |= 0xa0; + } + + /* Set params */ + err = tda665x_write(state, buf, 5); + if (err < 0) + goto exit; + + /* sleep for some time */ + printk("%s: Waiting to Phase LOCK\n", __func__); + msleep(20); + /* check status */ + err = tda665x_get_status(fe, &status); + if (err < 0) + goto exit; + + if (status == 1) { + printk("%s: Tuner Phase locked: status=%d\n", __func__, status); + state->frequency = frequency; /* cache successful state */ + } else { + printk("%s: No Phase lock: status=%d\n", __func__, status); + } + } else { + printk("%s: Unknown parameter (param=%d)\n", __func__, param); + return -EINVAL; + } + + return 0; +exit: + printk("%s: I/O Error\n", __func__); + return err; +} + +static int tda665x_release(struct dvb_frontend *fe) +{ + struct tda665x_state *state = fe->tuner_priv; + + fe->tuner_priv = NULL; + kfree(state); + return 0; +} + +static struct dvb_tuner_ops tda665x_ops = { + + .set_state = tda665x_set_state, + .get_state = tda665x_get_state, + .get_status = tda665x_get_status, + .release = tda665x_release +}; + +struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, + const struct tda665x_config *config, + struct i2c_adapter *i2c) +{ + struct tda665x_state *state = NULL; + struct dvb_tuner_info *info; + + state = kzalloc(sizeof (struct tda665x_state), GFP_KERNEL); + if (state == NULL) + goto exit; + + state->config = config; + state->i2c = i2c; + state->fe = fe; + fe->tuner_priv = state; + fe->ops.tuner_ops = tda665x_ops; + info = &fe->ops.tuner_ops.info; + + memcpy(info->name, config->name, sizeof (config->name)); + info->frequency_min = config->frequency_min; + info->frequency_max = config->frequency_max; + info->frequency_step = config->frequency_offst; + + printk("%s: Attaching TDA665x (%s) tuner\n", __func__, info->name); + + return fe; + +exit: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(tda665x_attach); + +MODULE_DESCRIPTION("TDA665x driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/tda665x.h b/drivers/media/dvb/frontends/tda665x.h new file mode 100644 index 000000000000..c0b544d8ef57 --- /dev/null +++ b/drivers/media/dvb/frontends/tda665x.h @@ -0,0 +1,52 @@ +/* + TDA665x tuner driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __TDA665x_H +#define __TDA665x_H + +struct tda665x_config { + char name[128]; + + u8 addr; + u32 frequency_min; + u32 frequency_max; + u32 frequency_offst; + u32 ref_multiplier; + u32 ref_divider; +}; + +#if defined(CONFIG_DVB_TDA665x) || (defined(CONFIG_DVB_TDA665x_MODULE) && defined(MODULE)) + +extern struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, + const struct tda665x_config *config, + struct i2c_adapter *i2c); + +#else + +static inline struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, + const struct tda665x_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); + return NULL; +} + +#endif /* CONFIG_DVB_TDA665x */ + +#endif /* __TDA665x_H */ diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c index 749e3f3dd06b..01a9ff07d770 100644 --- a/drivers/media/dvb/mantis/hopper_cards.c +++ b/drivers/media/dvb/mantis/hopper_cards.c @@ -219,7 +219,6 @@ static void __devexit hopper_pci_remove(struct pci_dev *pdev) struct mantis_pci *mantis = pci_get_drvdata(pdev); if (mantis) { -// mantis_uart_exit(mantis); mantis_dvb_exit(mantis); mantis_dma_exit(mantis); mantis_i2c_exit(mantis); diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c index d486c7fcb453..638177ce72a2 100644 --- a/drivers/media/dvb/mantis/mantis_cards.c +++ b/drivers/media/dvb/mantis/mantis_cards.c @@ -50,7 +50,6 @@ static char *label[10] = { "RACK" }; - static irqreturn_t mantis_irq_handler(int irq, void *dev_id) { u32 stat = 0, mask = 0, lstat = 0, mstat = 0; @@ -199,6 +198,14 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_dev return err; +fail7: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err); + mantis_uart_exit(mantis); + +fail6: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis CA exit! <%d>", err); + mantis_ca_exit(mantis); + fail5: dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB exit! <%d>", err); mantis_dvb_exit(mantis); @@ -228,8 +235,6 @@ static void __devexit mantis_pci_remove(struct pci_dev *pdev) struct mantis_pci *mantis = pci_get_drvdata(pdev); if (mantis) { - mantis_uart_exit(mantis); -// mantis_ca_exit(mantis); mantis_dvb_exit(mantis); mantis_dma_exit(mantis); mantis_i2c_exit(mantis); diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c index 8ebcd96b2b7d..eab3645f7acb 100644 --- a/drivers/media/dvb/mantis/mantis_dma.c +++ b/drivers/media/dvb/mantis/mantis_dma.c @@ -153,8 +153,7 @@ int mantis_dma_init(struct mantis_pci *mantis) if (mantis_alloc_buffers(mantis) < 0) { dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer"); - // Stop RISC Engine -// mmwrite(mmread(MANTIS_DMA_CTL) & ~MANTIS_RISC_EN, MANTIS_DMA_CTL); + /* Stop RISC Engine */ mmwrite(0, MANTIS_DMA_CTL); goto err; diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index be911d76daa7..42f658b06a66 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -252,14 +252,19 @@ int __devinit mantis_dvb_init(struct mantis_pci *mantis) err5: tasklet_kill(&mantis->tasklet); dvb_net_release(&mantis->dvbnet); + err4: mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem); + err3: mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw); + err2: dvb_dmxdev_release(&mantis->dmxdev); + err1: dvb_dmx_release(&mantis->demux); + err0: dvb_unregister_adapter(&mantis->dvb_adapter); @@ -271,21 +276,24 @@ int __devexit mantis_dvb_exit(struct mantis_pci *mantis) { int err; - err = mantis_frontend_shutdown(mantis); - if (err != 0) - dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err); + if (mantis->fe) { +// mantis_ca_exit(mantis); + err = mantis_frontend_shutdown(mantis); + if (err != 0) + dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err); + + dvb_unregister_frontend(mantis->fe); + } -// mantis_ca_exit(mantis); tasklet_kill(&mantis->tasklet); dvb_net_release(&mantis->dvbnet); + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem); mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw); + dvb_dmxdev_release(&mantis->dmxdev); dvb_dmx_release(&mantis->demux); - if (mantis->fe) - dvb_unregister_frontend(mantis->fe); - dprintk(MANTIS_DEBUG, 1, "dvb_unregister_adapter"); dvb_unregister_adapter(&mantis->dvb_adapter); diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c index ba55f0a9a10f..16b9e7e77b82 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.c +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -35,38 +35,9 @@ #define I2C_HW_B_MANTIS 0x1c -static int mantis_ack_wait(struct mantis_pci *mantis) -{ - int rc = 0; - u32 timeout = 0; - - if (wait_event_timeout(mantis->i2c_wq, - mantis->mantis_int_stat & MANTIS_INT_I2CDONE, - msecs_to_jiffies(50)) == -ERESTARTSYS) { - - dprintk(MANTIS_DEBUG, 1, "Master !I2CDONE"); - rc = -EREMOTEIO; - } - - while (!(mantis->mantis_int_stat & MANTIS_INT_I2CRACK)) { - dprintk(MANTIS_DEBUG, 1, "Waiting for Slave RACK"); - mantis->mantis_int_stat = mmread(MANTIS_INT_STAT); - msleep(5); - timeout++; - if (timeout > 500) { - dprintk(MANTIS_ERROR, 1, "Slave RACK Fail !"); - rc = -EREMOTEIO; - break; - } - } - udelay(350); - - return rc; -} - static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) { - u32 rxd, i; + u32 rxd, i, stat, trials; dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] [ ", __func__, msg->addr); @@ -82,10 +53,15 @@ static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); mmwrite(rxd, MANTIS_I2CDATA_CTL); - if (mantis_ack_wait(mantis) != 0) { - dprintk(MANTIS_DEBUG, 1, "ACK failed"); - return -EREMOTEIO; + + /* wait for xfer completion */ + for (trials = 0; trials < 100; trials++) { + udelay(500); + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CDONE) + break; } + rxd = mmread(MANTIS_I2CDATA_CTL); msg->buf[i] = (u8)((rxd >> 8) & 0xFF); dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); @@ -98,7 +74,7 @@ static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg) { int i; - u32 txd = 0; + u32 txd = 0, stat, trials; dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] [ ", __func__, msg->addr); @@ -115,9 +91,13 @@ static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); mmwrite(txd, MANTIS_I2CDATA_CTL); - if (mantis_ack_wait(mantis) != 0) { - dprintk(MANTIS_DEBUG, 1, "ACK failed"); - return -EREMOTEIO; + + /* wait for xfer completion */ + for (trials = 0; trials < 100; trials++) { + udelay(500); + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CDONE) + break; } } dprintk(MANTIS_INFO, 0, "]\n"); @@ -127,20 +107,77 @@ static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) { - int ret = 0, i; + int ret = 0, i = 0, trials; + u32 stat, data, txd; struct mantis_pci *mantis; + struct mantis_hwconfig *config; mantis = i2c_get_adapdata(adapter); - mutex_lock(&mantis->i2c_lock); - for (i = 0; i < num; i++) { - if (msgs[i].flags & I2C_M_RD) - ret = mantis_i2c_read(mantis, &msgs[i]); - else - ret = mantis_i2c_write(mantis, &msgs[i]); + BUG_ON(!mantis); + config = mantis->hwconfig; + BUG_ON(!config); + + dprintk(MANTIS_DEBUG, 1, "Messages:%d", num); + mutex_lock(&mantis->i2c_lock); + + while (i < num) { + /* Byte MODE */ + if (((i + 1) < num) && + (msgs[i].len < 2) && + (msgs[i + 1].len < 2) && + (msgs[i + 1].flags & I2C_M_RD)) { + + dprintk(MANTIS_DEBUG, 0, " Byte MODE:\n"); + + /* Read operation */ + txd = msgs[i].addr << 25 | (0x1 << 24) + | (msgs[i].buf[0] << 16) + | MANTIS_I2C_RATE_3; + + mmwrite(txd, MANTIS_I2CDATA_CTL); + /* wait for xfer completion */ + for (trials = 0; trials < 100; trials++) { + udelay(500); + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CDONE) + break; + } + + /* check for xfer completion */ + if (stat & MANTIS_INT_I2CDONE) { + /* check xfer was acknowledged */ + if (stat & MANTIS_INT_I2CRACK) { + data = mmread(MANTIS_I2CDATA_CTL); + msgs[i + 1].buf[0] = (data >> 8) & 0xff; + dprintk(MANTIS_DEBUG, 0, " Byte <%d> RXD=0x%02x [%02x]\n", 0x0, data, msgs[i + 1].buf[0]); + } else { + /* I/O error */ + dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__); + ret = -EIO; + break; + } + } else { + /* I/O error */ + dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__); + ret = -EIO; + break; + } + i += 2; /* Write/Read operation in one go */ + } + + if (i < num) { + if (msgs[i].flags & I2C_M_RD) + ret = mantis_i2c_read(mantis, &msgs[i]); + else + ret = mantis_i2c_write(mantis, &msgs[i]); + + i++; + if (ret < 0) + goto bail_out; + } - if (ret < 0) - goto bail_out; } + mutex_unlock(&mantis->i2c_lock); return num; @@ -189,9 +226,9 @@ int __devinit mantis_i2c_init(struct mantis_pci *mantis) intstat = mmread(MANTIS_INT_STAT); intmask = mmread(MANTIS_INT_MASK); mmwrite(intstat, MANTIS_INT_STAT); - mmwrite(intmask | MANTIS_INT_I2CDONE, MANTIS_INT_MASK); - - dprintk(MANTIS_DEBUG, 1, "Status=<%02x> Mask=<%02x>", intstat, intmask); + dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt"); + intmask = mmread(MANTIS_INT_MASK); + mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK); return 0; } @@ -199,6 +236,12 @@ EXPORT_SYMBOL_GPL(mantis_i2c_init); int __devexit mantis_i2c_exit(struct mantis_pci *mantis) { + u32 intmask; + + dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt"); + intmask = mmread(MANTIS_INT_MASK); + mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK); + dprintk(MANTIS_DEBUG, 1, "Removing I2C adapter"); return i2c_del_adapter(&mantis->adapter); } diff --git a/drivers/media/dvb/mantis/mantis_i2c.h b/drivers/media/dvb/mantis/mantis_i2c.h index 1e49ecfeee3e..d40da4fa0007 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.h +++ b/drivers/media/dvb/mantis/mantis_i2c.h @@ -1,6 +1,9 @@ #ifndef __MANTIS_I2C_H #define __MANTIS_I2C_H +#define I2C_STOP (1 << 0) +#define I2C_READ (1 << 1) + extern int mantis_i2c_init(struct mantis_pci *mantis); extern int mantis_i2c_exit(struct mantis_pci *mantis); diff --git a/drivers/media/dvb/mantis/mantis_ioc.c b/drivers/media/dvb/mantis/mantis_ioc.c index 4700088f0388..448e2c3e3445 100644 --- a/drivers/media/dvb/mantis/mantis_ioc.c +++ b/drivers/media/dvb/mantis/mantis_ioc.c @@ -36,13 +36,14 @@ #include "mantis_reg.h" #include "mantis_ioc.h" -static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) +static int read_eeprom_bytes(struct mantis_pci *mantis, u8 reg, u8 *data, u8 length) { struct i2c_adapter *adapter = &mantis->adapter; - int err; + u8 buf = reg; + struct i2c_msg msg[] = { - { .addr = 0x50, .flags = 0, .buf = data, .len = 1 }, + { .addr = 0x50, .flags = 0, .buf = &buf, .len = 1 }, { .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length }, }; @@ -56,32 +57,12 @@ static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) return 0; } - -static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) -{ - struct i2c_adapter *adapter = &mantis->adapter; - int err; - - struct i2c_msg msg = { .addr = 0x50, .flags = 0, .buf = data, .len = length }; - - err = i2c_transfer(adapter, &msg, 1); - if (err < 0) { - dprintk(MANTIS_ERROR, 1, "ERROR: i2c write: < err=%i length=0x%02x d0=0x%02x, d1=0x%02x >", - err, length, data[0], data[1]); - - return err; - } - - return 0; -} - int mantis_get_mac(struct mantis_pci *mantis) { int err; + u8 mac_addr[6] = {0}; - mantis->mac_address[0] = 0x08; - - err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6); + err = read_eeprom_bytes(mantis, 0x08, mac_addr, 6); if (err < 0) { dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err); @@ -90,9 +71,12 @@ int mantis_get_mac(struct mantis_pci *mantis) dprintk(MANTIS_ERROR, 0, " MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n", - mantis->mac_address[0], mantis->mac_address[1], - mantis->mac_address[2], mantis->mac_address[3], - mantis->mac_address[4], mantis->mac_address[5]); + mac_addr[0], + mac_addr[1], + mac_addr[2], + mac_addr[3], + mac_addr[4], + mac_addr[5]); return 0; } @@ -103,12 +87,14 @@ void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value) { u32 cur; + dprintk(MANTIS_DEBUG, 1, "Set Bit <%d> to <%d>", bitpos, value); cur = mmread(MANTIS_GPIF_ADDR); if (value) mantis->gpio_status = cur | (1 << bitpos); else mantis->gpio_status = cur & (~(1 << bitpos)); + dprintk(MANTIS_DEBUG, 1, "GPIO Value <%02x>", mantis->gpio_status); mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR); mmwrite(0x00, MANTIS_GPIF_DOUT); } diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c index 4b974eeefa9e..9efcfa7b8ab4 100644 --- a/drivers/media/dvb/mantis/mantis_vp3030.c +++ b/drivers/media/dvb/mantis/mantis_vp3030.c @@ -30,46 +30,41 @@ #include "dvb_net.h" #include "zl10353.h" +#include "tda665x.h" #include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" #include "mantis_vp3030.h" struct zl10353_config mantis_vp3030_config = { - .demod_address = 0x0f, + .demod_address = 0x0f, +}; + +struct tda665x_config env57h12d5_config = { + .name = "ENV57H12D5 (ET-50DT)", + .addr = 0x60, + .frequency_min = 47000000, + .frequency_max = 862000000, + .frequency_offst = 3616667, + .ref_multiplier = 6, /* 1/6 MHz */ + .ref_divider = 100000, /* 1/6 MHz */ }; #define MANTIS_MODEL_NAME "VP-3030" #define MANTIS_DEV_TYPE "DVB-T" -int panasonic_en57h12d5_set_params(struct dvb_frontend *fe, - struct dvb_frontend_parameters *params) -{ - u8 buf[4]; - int rc; - struct mantis_pci *mantis = fe->dvb->priv; - - struct i2c_msg tuner_msg = { - .addr = 0x60, - .flags = 0, - .buf = buf, - .len = sizeof (buf) - }; - - if ((params->frequency < 950000) || (params->frequency > 2150000)) - return -EINVAL; - rc = i2c_transfer(&mantis->adapter, &tuner_msg, 1); - if (rc != 1) { - printk("%s: I2C Transfer returned [%d]\n", __func__, rc); - return -EIO; - } - msleep_interruptible(1); - printk("%s: Send params to tuner ok!!!\n", __func__); - - return 0; -} static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) { struct i2c_adapter *adapter = &mantis->adapter; + struct mantis_hwconfig *config = mantis->hwconfig; + int err = 0; + + gpio_set_bits(mantis, config->reset, 0); + msleep(100); + err = mantis_frontend_power(mantis, POWER_ON); + msleep(100); + gpio_set_bits(mantis, config->reset, 1); dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); fe = zl10353_attach(&mantis_vp3030_config, adapter); @@ -77,6 +72,7 @@ static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend * if (!fe) return -1; + tda665x_attach(fe, &env57h12d5_config, adapter); mantis->fe = fe; dprintk(MANTIS_ERROR, 1, "Done!"); @@ -93,4 +89,6 @@ struct mantis_hwconfig vp3030_config = { .bytes = 0, .frontend_init = vp3030_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, }; From bc832fa2c0310c25ed60204616ccef4f8db088f3 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:57:28 -0300 Subject: [PATCH 1119/1626] V4L/DVB (13798): [Mantis] Enable power for all cards, use byte mode only on relevant devices Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/hopper_vp3028.c | 23 ++++++++--- drivers/media/dvb/mantis/mantis_common.h | 13 ++++-- drivers/media/dvb/mantis/mantis_i2c.c | 47 ++++++++++++++++----- drivers/media/dvb/mantis/mantis_vp1033.c | 36 ++++++++++++---- drivers/media/dvb/mantis/mantis_vp1034.c | 32 +++++++++++---- drivers/media/dvb/mantis/mantis_vp2033.c | 52 ++++++++++++++++-------- drivers/media/dvb/mantis/mantis_vp2040.c | 51 +++++++++++++++-------- drivers/media/dvb/mantis/mantis_vp3030.c | 22 +++++++--- 8 files changed, 202 insertions(+), 74 deletions(-) diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/dvb/mantis/hopper_vp3028.c index ba0c7e58b7a6..16b39d3b9ace 100644 --- a/drivers/media/dvb/mantis/hopper_vp3028.c +++ b/drivers/media/dvb/mantis/hopper_vp3028.c @@ -45,17 +45,30 @@ struct zl10353_config hopper_vp3028_config = { static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) { struct i2c_adapter *adapter = &mantis->adapter; + struct mantis_hwconfig *config = mantis->hwconfig; int err = 0; + gpio_set_bits(mantis, config->reset, 0); + msleep(100); err = mantis_frontend_power(mantis, POWER_ON); - mantis_frontend_soft_reset(mantis); + msleep(100); + gpio_set_bits(mantis, config->reset, 1); - dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); - fe = zl10353_attach(&hopper_vp3028_config, adapter); + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + msleep(250); + dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); + fe = zl10353_attach(&hopper_vp3028_config, adapter); - if (!fe) - return -1; + if (!fe) + return -1; + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + return -EIO; + } dprintk(MANTIS_ERROR, 1, "Done!"); return 0; diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index e912c5962e3a..6ae3aabe5604 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -32,6 +32,7 @@ #define MANTIS_NOTICE 1 #define MANTIS_INFO 2 #define MANTIS_DEBUG 3 +#define MANTIS_TMG 9 #define dprintk(y, z, format, arg...) do { \ if (z) { \ @@ -43,6 +44,8 @@ printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y)) \ printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((mantis->verbose > MANTIS_TMG) && (mantis->verbose > y)) \ + printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ } else { \ if (mantis->verbose > y) \ printk(format , ##arg); \ @@ -54,9 +57,6 @@ #define mmwrite(dat, addr) mwrite((dat), (mantis->mmio + (addr))) #define mmread(addr) mread(mantis->mmio + (addr)) -#define mmand(dat, addr) mmwrite((dat) & mmread(addr), addr) -#define mmor(dat, addr) mmwrite((dat) | mmread(addr), addr) -#define mmaor(dat, addr) mmwrite((dat) | ((mask) & mmread(addr)), addr) #define MANTIS_TS_188 0 #define MANTIS_TS_204 1 @@ -75,6 +75,11 @@ .driver_data = (unsigned long) (__configptr) \ } +enum mantis_i2c_mode { + MANTIS_PAGE_MODE = 0, + MANTIS_BYTE_MODE, +}; + struct mantis_pci; struct mantis_hwconfig { @@ -91,6 +96,8 @@ struct mantis_hwconfig { u8 power; u8 reset; + + enum mantis_i2c_mode i2c_mode; }; struct mantis_pci { diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c index 16b9e7e77b82..758f32a63b2f 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.c +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -35,6 +35,8 @@ #define I2C_HW_B_MANTIS 0x1c +#define TRIALS 10000 + static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) { u32 rxd, i, stat, trials; @@ -55,13 +57,25 @@ static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) mmwrite(rxd, MANTIS_I2CDATA_CTL); /* wait for xfer completion */ - for (trials = 0; trials < 100; trials++) { - udelay(500); + for (trials = 0; trials < TRIALS; trials++) { + msleep(1); stat = mmread(MANTIS_INT_STAT); if (stat & MANTIS_INT_I2CDONE) break; } + dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CRACK) + break; + msleep(1); + } + + dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); + rxd = mmread(MANTIS_I2CDATA_CTL); msg->buf[i] = (u8)((rxd >> 8) & 0xFF); dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); @@ -93,12 +107,24 @@ static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg mmwrite(txd, MANTIS_I2CDATA_CTL); /* wait for xfer completion */ - for (trials = 0; trials < 100; trials++) { - udelay(500); + for (trials = 0; trials < TRIALS; trials++) { + msleep(1); stat = mmread(MANTIS_INT_STAT); if (stat & MANTIS_INT_I2CDONE) break; } + + dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CRACK) + break; + msleep(1); + } + + dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); } dprintk(MANTIS_INFO, 0, "]\n"); @@ -122,10 +148,11 @@ static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, in while (i < num) { /* Byte MODE */ - if (((i + 1) < num) && - (msgs[i].len < 2) && - (msgs[i + 1].len < 2) && - (msgs[i + 1].flags & I2C_M_RD)) { + if ((config->i2c_mode & MANTIS_BYTE_MODE) && + ((i + 1) < num) && + (msgs[i].len < 2) && + (msgs[i + 1].len < 2) && + (msgs[i + 1].flags & I2C_M_RD)) { dprintk(MANTIS_DEBUG, 0, " Byte MODE:\n"); @@ -136,8 +163,8 @@ static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, in mmwrite(txd, MANTIS_I2CDATA_CTL); /* wait for xfer completion */ - for (trials = 0; trials < 100; trials++) { - udelay(500); + for (trials = 0; trials < TRIALS; trials++) { + msleep(1); stat = mmread(MANTIS_INT_STAT); if (stat & MANTIS_INT_I2CDONE) break; diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c index f2092ce9c4be..0bea6e89f551 100644 --- a/drivers/media/dvb/mantis/mantis_vp1033.c +++ b/drivers/media/dvb/mantis/mantis_vp1033.c @@ -31,7 +31,10 @@ #include "stv0299.h" #include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" #include "mantis_vp1033.h" +#include "mantis_reg.h" u8 lgtdqcs001f_inittab[] = { 0x01, 0x15, @@ -163,19 +166,32 @@ static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend * { struct i2c_adapter *adapter = &mantis->adapter; - dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)"); - fe = stv0299_attach(&lgtdqcs001f_config, adapter); + int err = 0; - if (fe) { - fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set; - dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x", - lgtdqcs001f_config.demod_address); + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); - dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success"); + dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)"); + fe = stv0299_attach(&lgtdqcs001f_config, adapter); + + if (fe) { + fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set; + dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x", + lgtdqcs001f_config.demod_address); + + dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success"); + } else { + return -1; + } } else { - return -1; - } + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + return -EIO; + } mantis->fe = fe; dprintk(MANTIS_ERROR, 1, "Done!"); @@ -192,4 +208,6 @@ struct mantis_hwconfig vp1033_config = { .bytes = 0, .frontend_init = vp1033_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, }; diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c index 40778ec8f460..98a4ec89f048 100644 --- a/drivers/media/dvb/mantis/mantis_vp1034.c +++ b/drivers/media/dvb/mantis/mantis_vp1034.c @@ -32,6 +32,7 @@ #include "mb86a16.h" #include "mantis_common.h" #include "mantis_ioc.h" +#include "mantis_dvb.h" #include "mantis_vp1034.h" #include "mantis_reg.h" @@ -74,17 +75,30 @@ static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend * { struct i2c_adapter *adapter = &mantis->adapter; - dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)"); - fe = mb86a16_attach(&vp1034_mb86a16_config, adapter); - if (fe) { - dprintk(MANTIS_ERROR, 1, - "found MB86A16 DVB-S/DSS frontend @0x%02x", - vp1034_mb86a16_config.demod_address); + int err = 0; + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)"); + fe = mb86a16_attach(&vp1034_mb86a16_config, adapter); + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found MB86A16 DVB-S/DSS frontend @0x%02x", + vp1034_mb86a16_config.demod_address); + + } else { + return -1; + } } else { - return -1; - } + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + return -EIO; + } mantis->fe = fe; dprintk(MANTIS_ERROR, 1, "Done!"); @@ -101,4 +115,6 @@ struct mantis_hwconfig vp1034_config = { .bytes = 0, .frontend_init = vp1034_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, }; diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c index 877329175d0f..cef108c5ffc7 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.c +++ b/drivers/media/dvb/mantis/mantis_vp2033.c @@ -31,6 +31,8 @@ #include "tda1002x.h" #include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" #include "mantis_vp2033.h" #define MANTIS_MODEL_NAME "VP-2033" @@ -123,32 +125,46 @@ static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend * { struct i2c_adapter *adapter = &mantis->adapter; - dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); - fe = tda10021_attach(&vp2033_tda1002x_cu1216_config, - adapter, - read_pwm(mantis)); + int err = 0; - if (fe) { - dprintk(MANTIS_ERROR, 1, - "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", - vp2033_tda1002x_cu1216_config.demod_address); - } else { - fe = tda10023_attach(&vp2033_tda10023_cu1216_config, + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); + fe = tda10021_attach(&vp2033_tda1002x_cu1216_config, adapter, read_pwm(mantis)); if (fe) { dprintk(MANTIS_ERROR, 1, - "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", vp2033_tda1002x_cu1216_config.demod_address); - } - } + } else { + fe = tda10023_attach(&vp2033_tda10023_cu1216_config, + adapter, + read_pwm(mantis)); - if (fe) { - fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; - dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + vp2033_tda1002x_cu1216_config.demod_address); + } + } + + if (fe) { + fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; + dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + } else { + return -1; + } } else { - return -1; + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; } mantis->fe = fe; @@ -167,4 +183,6 @@ struct mantis_hwconfig vp2033_config = { .bytes = 0, .frontend_init = vp2033_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, }; diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c index 51b082f7f917..e2019884ac3a 100644 --- a/drivers/media/dvb/mantis/mantis_vp2040.c +++ b/drivers/media/dvb/mantis/mantis_vp2040.c @@ -31,6 +31,8 @@ #include "tda1002x.h" #include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" #include "mantis_vp2040.h" #define MANTIS_MODEL_NAME "VP-2040" @@ -123,34 +125,47 @@ static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend * { struct i2c_adapter *adapter = &mantis->adapter; - dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); - fe = tda10021_attach(&vp2040_tda1002x_cu1216_config, - adapter, - read_pwm(mantis)); + int err = 0; - if (fe) { - dprintk(MANTIS_ERROR, 1, - "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", - vp2040_tda1002x_cu1216_config.demod_address); - } else { - fe = tda10023_attach(&vp2040_tda10023_cu1216_config, + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); + fe = tda10021_attach(&vp2040_tda1002x_cu1216_config, adapter, read_pwm(mantis)); if (fe) { dprintk(MANTIS_ERROR, 1, - "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", vp2040_tda1002x_cu1216_config.demod_address); + } else { + fe = tda10023_attach(&vp2040_tda10023_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + vp2040_tda1002x_cu1216_config.demod_address); + } } - } - if (fe) { - fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; - dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + if (fe) { + fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; + dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + } else { + return -1; + } } else { - return -1; - } + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + return -EIO; + } mantis->fe = fe; dprintk(MANTIS_DEBUG, 1, "Done!"); @@ -167,4 +182,6 @@ struct mantis_hwconfig vp2040_config = { .bytes = 0, .frontend_init = vp2040_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, }; diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c index 9efcfa7b8ab4..a44fac3aabc6 100644 --- a/drivers/media/dvb/mantis/mantis_vp3030.c +++ b/drivers/media/dvb/mantis/mantis_vp3030.c @@ -66,13 +66,23 @@ static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend * msleep(100); gpio_set_bits(mantis, config->reset, 1); - dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); - fe = zl10353_attach(&mantis_vp3030_config, adapter); + if (err == 0) { + msleep(250); + dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); + fe = zl10353_attach(&mantis_vp3030_config, adapter); - if (!fe) - return -1; + if (!fe) + return -1; - tda665x_attach(fe, &env57h12d5_config, adapter); + tda665x_attach(fe, &env57h12d5_config, adapter); + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + + } mantis->fe = fe; dprintk(MANTIS_ERROR, 1, "Done!"); @@ -91,4 +101,6 @@ struct mantis_hwconfig vp3030_config = { .frontend_init = vp3030_frontend_init, .power = GPIF_A12, .reset = GPIF_A13, + + .i2c_mode = MANTIS_BYTE_MODE }; From 68fe255cd15cf1fe04877fbbb0eafe80c43eff5d Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 09:01:35 -0300 Subject: [PATCH 1120/1626] V4L/DVB (13799): [Mantis] Unregister frontend Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_dvb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index 42f658b06a66..9d9c5582ada8 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -252,7 +252,8 @@ int __devinit mantis_dvb_init(struct mantis_pci *mantis) err5: tasklet_kill(&mantis->tasklet); dvb_net_release(&mantis->dvbnet); - + dvb_unregister_frontend(mantis->fe); + dvb_frontend_detach(mantis->fe); err4: mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem); @@ -281,7 +282,7 @@ int __devexit mantis_dvb_exit(struct mantis_pci *mantis) err = mantis_frontend_shutdown(mantis); if (err != 0) dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err); - + dvb_frontend_detach(mantis->fe); dvb_unregister_frontend(mantis->fe); } From 281859179f731b28aae78d13b2e8720219492000 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 09:02:00 -0300 Subject: [PATCH 1121/1626] V4L/DVB (13800): [Mantis] I2C optimization. Required delay is much lesser than 1mS. Do not wait, keep looping instead. Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_i2c.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c index 758f32a63b2f..9d2b51d2e4b6 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.c +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -58,7 +58,6 @@ static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) /* wait for xfer completion */ for (trials = 0; trials < TRIALS; trials++) { - msleep(1); stat = mmread(MANTIS_INT_STAT); if (stat & MANTIS_INT_I2CDONE) break; @@ -71,7 +70,6 @@ static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) stat = mmread(MANTIS_INT_STAT); if (stat & MANTIS_INT_I2CRACK) break; - msleep(1); } dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); @@ -108,7 +106,6 @@ static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg /* wait for xfer completion */ for (trials = 0; trials < TRIALS; trials++) { - msleep(1); stat = mmread(MANTIS_INT_STAT); if (stat & MANTIS_INT_I2CDONE) break; @@ -121,7 +118,6 @@ static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg stat = mmread(MANTIS_INT_STAT); if (stat & MANTIS_INT_I2CRACK) break; - msleep(1); } dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); @@ -164,7 +160,6 @@ static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, in mmwrite(txd, MANTIS_I2CDATA_CTL); /* wait for xfer completion */ for (trials = 0; trials < TRIALS; trials++) { - msleep(1); stat = mmread(MANTIS_INT_STAT); if (stat & MANTIS_INT_I2CDONE) break; From 5dd83a35bea908ebb8243d67d8c251eed2bb5cc8 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Tue, 15 Dec 2009 06:15:27 -0300 Subject: [PATCH 1122/1626] V4L/DVB (13801): [MB86A16] Use the search callback Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a16.c | 45 +++++++++++++-------------- 1 file changed, 21 insertions(+), 24 deletions(-) diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c index eddb35baaf00..33387b78d85a 100644 --- a/drivers/media/dvb/frontends/mb86a16.c +++ b/drivers/media/dvb/frontends/mb86a16.c @@ -1487,16 +1487,19 @@ static int mb86a16_set_fe(struct mb86a16_state *state) } else { dprintk(verbose, MB86A16_INFO, 1, "NO -- SYNC"); SEQ_set(state, 1); + ret = -1; } } } else { dprintk (verbose, MB86A16_INFO, 1, "NO -- SIGNAL"); + ret = -1; } sync = sync_chk(state, &junk); if (sync) { dprintk(verbose, MB86A16_INFO, 1, "******* SYNC *******"); freqerr_chk(state, state->frequency, state->srate, 1); + ret = 0; break; } } @@ -1610,33 +1613,21 @@ err: return -EREMOTEIO; } -#define MB86A16_FE_ALGO 1 - -static int mb86a16_frontend_algo(struct dvb_frontend *fe) +static enum dvbfe_search mb86a16_search(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) { - return MB86A16_FE_ALGO; -} - -static int mb86a16_set_frontend(struct dvb_frontend *fe, - struct dvb_frontend_parameters *p, - unsigned int mode_flags, - int *delay, - fe_status_t *status) -{ - int ret = 0; struct mb86a16_state *state = fe->demodulator_priv; - if (p != NULL) { - state->frequency = p->frequency / 1000; - state->srate = p->u.qpsk.symbol_rate / 1000; - ret = mb86a16_set_fe(state); + state->frequency = p->frequency / 1000; + state->srate = p->u.qpsk.symbol_rate / 1000; + + if (!mb86a16_set_fe(state)) { + dprintk(verbose, MB86A16_ERROR, 1, "Succesfully acquired LOCK"); + return DVBFE_ALGO_SEARCH_SUCCESS; } - if (!(mode_flags & FE_TUNE_MODE_ONESHOT)) - mb86a16_read_status(fe, status); - *delay = HZ/3000; - - return ret; + dprintk(verbose, MB86A16_ERROR, 1, "Lock acquisition failed!"); + return DVBFE_ALGO_SEARCH_FAILED; } static void mb86a16_release(struct dvb_frontend *fe) @@ -1809,6 +1800,11 @@ static int mb86a16_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) return 0; } +static enum dvbfe_algo mb86a16_frontend_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_CUSTOM; +} + static struct dvb_frontend_ops mb86a16_ops = { .info = { .name = "Fujitsu MB86A16 DVB-S", @@ -1826,9 +1822,10 @@ static struct dvb_frontend_ops mb86a16_ops = { FE_CAN_FEC_AUTO }, .release = mb86a16_release, - .tune = mb86a16_set_frontend, - .read_status = mb86a16_read_status, + .get_frontend_algo = mb86a16_frontend_algo, + .search = mb86a16_search, + .read_status = mb86a16_read_status, .init = mb86a16_init, .sleep = mb86a16_sleep, .read_status = mb86a16_read_status, From 0bdc799b8b82cf61c86604291c53998febc96403 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Tue, 15 Dec 2009 06:17:54 -0300 Subject: [PATCH 1123/1626] V4L/DVB (13802): [Mantis/Hopper] Fix all build related warnings Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/hopper_cards.c | 4 ---- drivers/media/dvb/mantis/hopper_vp3028.c | 1 - drivers/media/dvb/mantis/mantis_ca.c | 1 - drivers/media/dvb/mantis/mantis_cards.c | 13 ------------- drivers/media/dvb/mantis/mantis_dvb.c | 1 - drivers/media/dvb/mantis/mantis_evm.c | 1 - drivers/media/dvb/mantis/mantis_hif.c | 17 ----------------- drivers/media/dvb/mantis/mantis_ioc.c | 1 - drivers/media/dvb/mantis/mantis_pcmcia.c | 1 - drivers/media/dvb/mantis/mantis_uart.c | 7 +++---- drivers/media/dvb/mantis/mantis_vp1033.c | 1 - drivers/media/dvb/mantis/mantis_vp1034.c | 1 - drivers/media/dvb/mantis/mantis_vp1041.c | 1 - drivers/media/dvb/mantis/mantis_vp2033.c | 1 - drivers/media/dvb/mantis/mantis_vp2040.c | 1 - drivers/media/dvb/mantis/mantis_vp3030.c | 1 - 16 files changed, 3 insertions(+), 50 deletions(-) diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c index 01a9ff07d770..6d5d101f0ab0 100644 --- a/drivers/media/dvb/mantis/hopper_cards.c +++ b/drivers/media/dvb/mantis/hopper_cards.c @@ -190,10 +190,6 @@ static int __devinit hopper_pci_probe(struct pci_dev *pdev, const struct pci_dev return err; -fail5: - dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB exit! <%d>", err); - mantis_dvb_exit(mantis); - fail4: dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err); mantis_dma_exit(mantis); diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/dvb/mantis/hopper_vp3028.c index 16b39d3b9ace..76cad8763382 100644 --- a/drivers/media/dvb/mantis/hopper_vp3028.c +++ b/drivers/media/dvb/mantis/hopper_vp3028.c @@ -18,7 +18,6 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include #include #include diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index 4151cba35e72..88899ac96d63 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -18,7 +18,6 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include #include #include diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c index 638177ce72a2..0b52f996f8e1 100644 --- a/drivers/media/dvb/mantis/mantis_cards.c +++ b/drivers/media/dvb/mantis/mantis_cards.c @@ -197,19 +197,6 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_dev devs++; return err; - -fail7: - dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err); - mantis_uart_exit(mantis); - -fail6: - dprintk(MANTIS_ERROR, 1, "ERROR: Mantis CA exit! <%d>", err); - mantis_ca_exit(mantis); - -fail5: - dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB exit! <%d>", err); - mantis_dvb_exit(mantis); - fail4: dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err); mantis_dma_exit(mantis); diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index 9d9c5582ada8..1e08e3107639 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -20,7 +20,6 @@ #include #include -#include #include #include #include diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index 2005b2489b74..9304b0edd89e 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -20,7 +20,6 @@ #include -#include #include #include #include diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index bb05427fdeb6..73e5ca0c6c14 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -22,7 +22,6 @@ #include #include -#include #include #include #include @@ -40,22 +39,6 @@ #include "mantis_reg.h" -static int mantis_hif_data_available(struct mantis_ca *ca) -{ - struct mantis_pci *mantis = ca->ca_priv; - int rc = 0; - - if (wait_event_interruptible_timeout(ca->hif_data_wq, - ca->sbuf_status & MANTIS_SBUF_DATA_AVAIL, - msecs_to_jiffies(500)) == -ERESTARTSYS) { - - dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Read wait event timeout !", mantis->num); - rc = -EREMOTEIO; - } - ca->sbuf_status &= ~MANTIS_SBUF_DATA_AVAIL; - udelay(2); - return rc; -} static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca) { diff --git a/drivers/media/dvb/mantis/mantis_ioc.c b/drivers/media/dvb/mantis/mantis_ioc.c index 448e2c3e3445..dd6636999add 100644 --- a/drivers/media/dvb/mantis/mantis_ioc.c +++ b/drivers/media/dvb/mantis/mantis_ioc.c @@ -21,7 +21,6 @@ #include #include -#include #include #include #include diff --git a/drivers/media/dvb/mantis/mantis_pcmcia.c b/drivers/media/dvb/mantis/mantis_pcmcia.c index 90ca356985eb..d6bca3e58597 100644 --- a/drivers/media/dvb/mantis/mantis_pcmcia.c +++ b/drivers/media/dvb/mantis/mantis_pcmcia.c @@ -20,7 +20,6 @@ #include -#include #include #include #include diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c index fb423b0a58fd..03b47cf15f8d 100644 --- a/drivers/media/dvb/mantis/mantis_uart.c +++ b/drivers/media/dvb/mantis/mantis_uart.c @@ -26,19 +26,18 @@ struct mantis_uart_params { int mantis_uart_read(struct mantis_pci *mantis, u8 *data) { struct mantis_hwconfig *config = mantis->hwconfig; - u32 stat, i; - unsigned long flags; + u32 stat = 0, i; /* get data */ for (i = 0; i < (config->bytes + 1); i++) { + stat = mmread(MANTIS_UART_STAT); + if (stat & MANTIS_UART_RXFIFO_FULL) { dprintk(MANTIS_ERROR, 1, "RX Fifo FULL"); } data[i] = mmread(MANTIS_UART_RXD) & 0x3f; - stat = mmread(MANTIS_UART_STAT); - dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f); if (data[i] & (1 << 7)) { diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c index 0bea6e89f551..c9760b00d0ab 100644 --- a/drivers/media/dvb/mantis/mantis_vp1033.c +++ b/drivers/media/dvb/mantis/mantis_vp1033.c @@ -18,7 +18,6 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include #include #include diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c index 98a4ec89f048..7ddd149b0fea 100644 --- a/drivers/media/dvb/mantis/mantis_vp1034.c +++ b/drivers/media/dvb/mantis/mantis_vp1034.c @@ -18,7 +18,6 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include #include #include diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c index 1181fad3b27b..368fc815a61d 100644 --- a/drivers/media/dvb/mantis/mantis_vp1041.c +++ b/drivers/media/dvb/mantis/mantis_vp1041.c @@ -18,7 +18,6 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include #include #include diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c index cef108c5ffc7..45f71749bb98 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.c +++ b/drivers/media/dvb/mantis/mantis_vp2033.c @@ -18,7 +18,6 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include #include #include diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c index e2019884ac3a..8471bff672f3 100644 --- a/drivers/media/dvb/mantis/mantis_vp2040.c +++ b/drivers/media/dvb/mantis/mantis_vp2040.c @@ -18,7 +18,6 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include #include #include diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c index a44fac3aabc6..1895e956b16d 100644 --- a/drivers/media/dvb/mantis/mantis_vp3030.c +++ b/drivers/media/dvb/mantis/mantis_vp3030.c @@ -18,7 +18,6 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include #include #include From 83dbe82bd7766e5045e6561bd44e22b801e7ad76 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Wed, 9 Dec 2009 19:00:33 -0300 Subject: [PATCH 1124/1626] V4L/DVB (13803): Remove unused dependency on CU1216 Thanks to Matthias Wachter for pointing it out. Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/media/dvb/mantis/Kconfig b/drivers/media/dvb/mantis/Kconfig index aaf025097b44..f9219cd7bb0c 100644 --- a/drivers/media/dvb/mantis/Kconfig +++ b/drivers/media/dvb/mantis/Kconfig @@ -11,7 +11,6 @@ config DVB_MANTIS tristate "MANTIS based cards" depends on MANTIS_CORE && DVB_CORE && PCI && I2C select DVB_MB86A16 - select DVB_CU1216 select DVB_ZL10353 select DVB_STV0299 select DVB_PLL From 0ac6e141eb105f5845eb7066b5279709393b1c78 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Wed, 9 Dec 2009 19:27:17 -0300 Subject: [PATCH 1125/1626] V4L/DVB (13804): Remove unused I2C Adapter ID Signed-off-by: Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_i2c.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c index 9d2b51d2e4b6..7bb4e78aa714 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.c +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -33,8 +33,6 @@ #include "mantis_reg.h" #include "mantis_i2c.h" -#define I2C_HW_B_MANTIS 0x1c - #define TRIALS 10000 static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) @@ -234,7 +232,6 @@ int __devinit mantis_i2c_init(struct mantis_pci *mantis) i2c_adapter->class = I2C_CLASS_TV_DIGITAL; i2c_adapter->algo = &mantis_algo; i2c_adapter->algo_data = NULL; - i2c_adapter->id = I2C_HW_B_MANTIS; i2c_adapter->timeout = 500; i2c_adapter->retries = 3; i2c_adapter->dev.parent = &pdev->dev; From c5e598a6f89ca7335db9f327e24e3abd13d137cf Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Wed, 9 Dec 2009 19:59:26 -0300 Subject: [PATCH 1126/1626] V4L/DVB (13805): Fix: Unregister the frontend before detaching Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_dvb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index 1e08e3107639..54bf4ea9efd7 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -281,8 +281,8 @@ int __devexit mantis_dvb_exit(struct mantis_pci *mantis) err = mantis_frontend_shutdown(mantis); if (err != 0) dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err); - dvb_frontend_detach(mantis->fe); dvb_unregister_frontend(mantis->fe); + dvb_frontend_detach(mantis->fe); } tasklet_kill(&mantis->tasklet); From a1497357dce240880d984f4b657b54245f739dbc Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 11 Dec 2009 20:41:07 -0300 Subject: [PATCH 1127/1626] V4L/DVB (13806): Register and Initialize Remote control Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/Makefile | 3 +- drivers/media/dvb/mantis/mantis_cards.c | 14 +++ drivers/media/dvb/mantis/mantis_common.h | 2 + drivers/media/dvb/mantis/mantis_input.c | 147 +++++++++++++++++++++++ drivers/media/dvb/mantis/mantis_uart.c | 55 +++++++-- drivers/media/dvb/mantis/mantis_uart.h | 3 +- 6 files changed, 209 insertions(+), 15 deletions(-) create mode 100644 drivers/media/dvb/mantis/mantis_input.c diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile index 399c9018cdb0..98dc5cd258ac 100644 --- a/drivers/media/dvb/mantis/Makefile +++ b/drivers/media/dvb/mantis/Makefile @@ -7,7 +7,8 @@ mantis_core-objs := mantis_ioc.o \ mantis_evm.o \ mantis_hif.o \ mantis_ca.o \ - mantis_pcmcia.o + mantis_pcmcia.o \ + mantis_input.o mantis-objs := mantis_cards.o \ mantis_vp1033.o \ diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c index 0b52f996f8e1..f3fefbbc876f 100644 --- a/drivers/media/dvb/mantis/mantis_cards.c +++ b/drivers/media/dvb/mantis/mantis_cards.c @@ -194,9 +194,21 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_dev dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err); goto fail4; } + err = mantis_uart_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART initialization failed <%d>", err); + goto fail6; + } + devs++; return err; + + + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err); + mantis_uart_exit(mantis); + +fail6: fail4: dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err); mantis_dma_exit(mantis); @@ -222,6 +234,8 @@ static void __devexit mantis_pci_remove(struct pci_dev *pdev) struct mantis_pci *mantis = pci_get_drvdata(pdev); if (mantis) { + + mantis_uart_exit(mantis); mantis_dvb_exit(mantis); mantis_dma_exit(mantis); mantis_i2c_exit(mantis); diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index 6ae3aabe5604..c2d085460e60 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -170,6 +170,8 @@ struct mantis_pci { wait_queue_head_t uart_wq; struct work_struct uart_work; spinlock_t uart_lock; + + struct input_dev *rc; }; #define MANTIS_HIF_STATUS (mantis->gpio_status) diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c new file mode 100644 index 000000000000..9395fcf4a453 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_input.c @@ -0,0 +1,147 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_uart.h" + +static struct ir_scancode mantis_ir_table[] = { + { 0x29, KEY_POWER }, + { 0x28, KEY_FAVORITES }, + { 0x30, KEY_TEXT }, + { 0x17, KEY_INFO }, // Preview + { 0x23, KEY_EPG }, + { 0x3b, KEY_F22 },// Record List + { 0x3c, KEY_1 }, + { 0x3e, KEY_2 }, + { 0x39, KEY_3 }, + { 0x36, KEY_4 }, + { 0x22, KEY_5 }, + { 0x20, KEY_6 }, + { 0x32, KEY_7 }, + { 0x26, KEY_8 }, + { 0x24, KEY_9 }, + { 0x2a, KEY_0 }, + + { 0x33, KEY_CANCEL }, + { 0x2c, KEY_BACK }, + { 0x15, KEY_CLEAR }, + { 0x3f, KEY_TAB }, + { 0x10, KEY_ENTER }, + { 0x14, KEY_UP }, + { 0x0d, KEY_RIGHT }, + { 0x0e, KEY_DOWN }, + { 0x11, KEY_LEFT }, + + { 0x21, KEY_VOLUMEUP }, + { 0x35, KEY_VOLUMEDOWN }, + { 0x3d, KEY_CHANNELDOWN }, + { 0x3a, KEY_CHANNELUP }, + { 0x2e, KEY_RECORD }, + { 0x2b, KEY_PLAY }, + { 0x13, KEY_PAUSE }, + { 0x25, KEY_STOP }, + + { 0x1f, KEY_REWIND }, + { 0x2d, KEY_FASTFORWARD }, + { 0x1e, KEY_PREVIOUS }, // Replay |< + { 0x1d, KEY_NEXT }, // Skip >| + + { 0x0b, KEY_CAMERA }, // Capture + { 0x0f, KEY_LANGUAGE }, // SAP + { 0x18, KEY_MODE }, // PIP + { 0x12, KEY_ZOOM }, // Full screen, + { 0x1c, KEY_SUBTITLE }, + { 0x2f, KEY_MUTE }, + { 0x16, KEY_F20 }, // L/R, + { 0x38, KEY_F21 }, // Hibernate, + + { 0x37, KEY_SWITCHVIDEOMODE }, // A/V + { 0x31, KEY_AGAIN }, // Recall, + { 0x1a, KEY_KPPLUS }, // Zoom+, + { 0x19, KEY_KPMINUS }, // Zoom-, + { 0x27, KEY_RED }, + { 0x0C, KEY_GREEN }, + { 0x01, KEY_YELLOW }, + { 0x00, KEY_BLUE }, +}; + +struct ir_scancode_table ir_mantis = { + .scan = mantis_ir_table, + .size = ARRAY_SIZE(mantis_ir_table), +}; +EXPORT_SYMBOL_GPL(ir_mantis); + +int mantis_input_init(struct mantis_pci *mantis) +{ + struct input_dev *rc; + struct ir_input_state rc_state; + char name[80], dev[80]; + int err; + + rc = input_allocate_device(); + if (!rc) { + dprintk(MANTIS_ERROR, 1, "Input device allocate failed"); + return -ENOMEM; + } + + sprintf(name, "Mantis %s IR receiver", mantis->hwconfig->model_name); + sprintf(dev, "pci-%s/ir0", pci_name(mantis->pdev)); + + rc->name = name; + rc->phys = dev; + + ir_input_init(rc, &rc_state, IR_TYPE_OTHER, &ir_mantis); + + rc->id.bustype = BUS_PCI; + rc->id.vendor = mantis->vendor_id; + rc->id.product = mantis->device_id; + rc->id.version = 1; + rc->dev = mantis->pdev->dev; + + err = input_register_device(rc); + if (err) { + dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err); + return -ENODEV; + } + + mantis->rc = rc; + + return 0; +} + +int mantis_exit(struct mantis_pci *mantis) +{ + struct input_dev *rc = mantis->rc; + + input_unregister_device(rc); + + return 0; +} diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c index 03b47cf15f8d..7d2f2398fa8b 100644 --- a/drivers/media/dvb/mantis/mantis_uart.c +++ b/drivers/media/dvb/mantis/mantis_uart.c @@ -1,7 +1,26 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + #include #include -#include #include #include #include @@ -21,6 +40,24 @@ struct mantis_uart_params { enum mantis_parity parity; }; +static struct { + char string[7]; +} rates[5] = { + { "9600" }, + { "19200" }, + { "38400" }, + { "57600" }, + { "115200" } +}; + +static struct { + char string[5]; +} parity[3] = { + { "NONE" }, + { "ODD" }, + { "EVEN" } +}; + #define UART_MAX_BUF 16 int mantis_uart_read(struct mantis_pci *mantis, u8 *data) @@ -60,12 +97,10 @@ static void mantis_uart_work(struct work_struct *work) u8 buf[16]; int i; - dprintk(MANTIS_DEBUG, 1, "UART read"); mantis_uart_read(mantis, buf); - dprintk(MANTIS_DEBUG, 1, "UART: "); for (i = 0; i < (config->bytes + 1); i++) - dprintk(MANTIS_DEBUG, 0, "<%02x> ", buf[i]); + dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]); dprintk(MANTIS_DEBUG, 0, "\n"); } @@ -73,15 +108,8 @@ static void mantis_uart_work(struct work_struct *work) static int mantis_uart_setup(struct mantis_pci *mantis, struct mantis_uart_params *params) { - char* rates[] = { "B_9600", "B_19200", "B_38400", "B_57600", "B_115200" }; - char* parity[] = { "NONE", "ODD", "EVEN" }; - u32 reg; - dprintk(MANTIS_DEBUG, 1, "Set Parity <%s> Baud Rate <%s>", - parity[params->parity], - rates[params->baud_rate]); - mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL); reg = mmread(MANTIS_UART_BAUD); @@ -116,10 +144,12 @@ int mantis_uart_init(struct mantis_pci *mantis) struct mantis_hwconfig *config = mantis->hwconfig; struct mantis_uart_params params; - dprintk(MANTIS_DEBUG, 1, "Initializing UART .."); /* default parity: */ params.baud_rate = config->baud_rate; params.parity = config->parity; + dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s", + rates[params.baud_rate].string, + parity[params.parity].string); init_waitqueue_head(&mantis->uart_wq); spin_lock_init(&mantis->uart_lock); @@ -142,6 +172,7 @@ int mantis_uart_init(struct mantis_pci *mantis) mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL); schedule_work(&mantis->uart_work); + dprintk(MANTIS_DEBUG, 1, "UART succesfully initialized"); return 0; } diff --git a/drivers/media/dvb/mantis/mantis_uart.h b/drivers/media/dvb/mantis/mantis_uart.h index 0a42cd01ab22..62ab66ebb971 100644 --- a/drivers/media/dvb/mantis/mantis_uart.h +++ b/drivers/media/dvb/mantis/mantis_uart.h @@ -45,10 +45,9 @@ enum mantis_baud { }; enum mantis_parity { - MANTIS_PARITY_UNDEFINED = 0, + MANTIS_PARITY_NONE = 0, MANTIS_PARITY_EVEN, MANTIS_PARITY_ODD, - MANTIS_PARITY_NONE }; struct mantis_pci; From 1e42dc78900e9d0ce89d77f3ba6aca00abd5f1b5 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Sat, 12 Dec 2009 03:14:25 -0300 Subject: [PATCH 1128/1626] V4L/DVB (13807): Fix: Free device in the device registration failure case Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_input.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c index 9395fcf4a453..b27d7759788b 100644 --- a/drivers/media/dvb/mantis/mantis_input.c +++ b/drivers/media/dvb/mantis/mantis_input.c @@ -129,6 +129,7 @@ int mantis_input_init(struct mantis_pci *mantis) err = input_register_device(rc); if (err) { dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err); + input_free_device(rc); return -ENODEV; } From f5ae4f6f482191c531ea9e50ac91d9bd2ffca171 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Tue, 15 Dec 2009 08:47:21 -0300 Subject: [PATCH 1129/1626] V4L/DVB (13809): Fix Checkpatch violations Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a16.c | 109 +++++++++++---------- drivers/media/dvb/frontends/mb86a16.h | 2 +- drivers/media/dvb/frontends/mb86a16_priv.h | 2 +- drivers/media/dvb/frontends/tda665x.c | 32 +++--- drivers/media/dvb/frontends/tda665x.h | 2 +- drivers/media/dvb/mantis/hopper_cards.c | 2 +- drivers/media/dvb/mantis/mantis_ca.c | 4 +- drivers/media/dvb/mantis/mantis_cards.c | 2 +- drivers/media/dvb/mantis/mantis_core.c | 48 +++++---- drivers/media/dvb/mantis/mantis_core.h | 14 +-- drivers/media/dvb/mantis/mantis_dma.c | 11 ++- drivers/media/dvb/mantis/mantis_dvb.c | 12 +-- drivers/media/dvb/mantis/mantis_i2c.c | 2 +- drivers/media/dvb/mantis/mantis_input.c | 28 +++--- drivers/media/dvb/mantis/mantis_reg.h | 2 +- drivers/media/dvb/mantis/mantis_vp1033.c | 12 +-- drivers/media/dvb/mantis/mantis_vp1034.c | 2 +- drivers/media/dvb/mantis/mantis_vp1041.c | 9 +- drivers/media/dvb/mantis/mantis_vp2033.c | 2 +- drivers/media/dvb/mantis/mantis_vp2040.c | 2 +- 20 files changed, 155 insertions(+), 144 deletions(-) diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c index 33387b78d85a..32f20c681442 100644 --- a/drivers/media/dvb/frontends/mb86a16.c +++ b/drivers/media/dvb/frontends/mb86a16.c @@ -37,11 +37,11 @@ struct mb86a16_state { const struct mb86a16_config *config; struct dvb_frontend frontend; - // tuning parameters + /* tuning parameters */ int frequency; int srate; - // Internal stuff + /* Internal stuff */ int master_clk; int deci; int csel; @@ -105,7 +105,7 @@ static int mb86a16_read(struct mb86a16_state *state, u8 reg, u8 *val) .flags = 0, .buf = b0, .len = 1 - },{ + }, { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, @@ -435,7 +435,7 @@ static int signal_det(struct mb86a16_state *state, wait_sym = 80000; } for (i = 0; i < 3; i++) { - if (i == 0 ) + if (i == 0) smrtd = smrt * 98 / 100; else if (i == 1) smrtd = smrt; @@ -480,11 +480,11 @@ static int rf_val_set(struct mb86a16_state *state, unsigned char rf_val[5]; int ack = -1; - if (smrt > 37750 ) + if (smrt > 37750) C = 1; else if (smrt > 18875) C = 2; - else if (smrt > 5500 ) + else if (smrt > 5500) C = 3; else C = 4; @@ -526,7 +526,7 @@ static int rf_val_set(struct mb86a16_state *state, rf_val[2] = (M & 0x00ff0) >> 4; rf_val[3] = ((M & 0x0000f) << 4) | B; - // Frequency Set + /* Frequency Set */ if (mb86a16_write(state, 0x21, rf_val[0]) < 0) ack = 0; if (mb86a16_write(state, 0x22, rf_val[1]) < 0) @@ -655,8 +655,8 @@ static int freqerr_chk(struct mb86a16_state *state, unsigned char CRM, AFCML, AFCMH; unsigned char temp1, temp2, temp3; int crm, afcm, AFCM; - int crrerr, afcerr; // [kHz] - int frqerr; // [MHz] + int crrerr, afcerr; /* kHz */ + int frqerr; /* MHz */ int afcen, afcexen = 0; int R, M, fOSC, fOSC_OFS; @@ -718,12 +718,12 @@ static int freqerr_chk(struct mb86a16_state *state, fOSC_OFS = fOSC - fTP; - if (unit == 0) { //[MHz] + if (unit == 0) { /* MHz */ if (crrerr + afcerr + fOSC_OFS * 1000 >= 0) frqerr = (crrerr + afcerr + fOSC_OFS * 1000 + 500) / 1000; else frqerr = (crrerr + afcerr + fOSC_OFS * 1000 - 500) / 1000; - } else { //[kHz] + } else { /* kHz */ frqerr = crrerr + afcerr + fOSC_OFS * 1000; } @@ -760,13 +760,13 @@ static void swp_info_get(struct mb86a16_state *state, crnt_swp_freq = fOSC_start * 1000 + v * swp_ofs; - if (R == 0 ) + if (R == 0) *fOSC = (crnt_swp_freq + 1000) / 2000 * 2; else *fOSC = (crnt_swp_freq + 500) / 1000; if (*fOSC >= crnt_swp_freq) - *afcex_freq = *fOSC *1000 - crnt_swp_freq; + *afcex_freq = *fOSC * 1000 - crnt_swp_freq; else *afcex_freq = crnt_swp_freq - *fOSC * 1000; @@ -782,7 +782,7 @@ static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V int swp_freq ; if ((i % 2 == 1) && (v <= vmax)) { - // positive v (case 1) + /* positive v (case 1) */ if ((v - 1 == vmin) && (*(V + 30 + v) >= 0) && (*(V + 30 + v - 1) >= 0) && @@ -796,7 +796,7 @@ static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V (*(V + 30 + v - 1) >= 0) && (*(V + 30 + v) > *(V + 30 + v - 1)) && (*(V + 30 + v) > SIGMIN)) { - // (case 2) + /* (case 2) */ swp_freq = fOSC * 1000 + afcex_freq; *SIG1 = *(V + 30 + v); } else if ((*(V + 30 + v) > 0) && @@ -807,7 +807,7 @@ static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V (*(V + 30 + v - 2) > *(V + 30 + v - 3)) && ((*(V + 30 + v - 1) > SIGMIN) || (*(V + 30 + v - 2) > SIGMIN))) { - // (case 3) + /* (case 3) */ if (*(V + 30 + v - 1) >= *(V + 30 + v - 2)) { swp_freq = fOSC * 1000 + afcex_freq - swp_ofs; *SIG1 = *(V + 30 + v - 1); @@ -823,7 +823,7 @@ static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V (*(V + 30 + v - 1) > *(V + 30 + v - 2)) && ((*(V + 30 + v) > SIGMIN) || (*(V + 30 + v - 1) > SIGMIN))) { - // (case 4) + /* (case 4) */ if (*(V + 30 + v) >= *(V + 30 + v - 1)) { swp_freq = fOSC * 1000 + afcex_freq; *SIG1 = *(V + 30 + v); @@ -835,7 +835,7 @@ static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V swp_freq = -1 ; } } else if ((i % 2 == 0) && (v >= vmin)) { - // Negative v (case 1) + /* Negative v (case 1) */ if ((*(V + 30 + v) > 0) && (*(V + 30 + v + 1) > 0) && (*(V + 30 + v + 2) > 0) && @@ -850,7 +850,7 @@ static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V (*(V + 30 + v + 1) >= 0) && (*(V + 30 + v + 1) > *(V + 30 + v)) && (*(V + 30 + v + 1) > SIGMIN)) { - // (case 2) + /* (case 2) */ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; *SIG1 = *(V + 30 + v); } else if ((v == vmin) && @@ -860,18 +860,18 @@ static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V (*(V + 30 + v) > *(V + 30 + v + 1)) && (*(V + 30 + v) > *(V + 30 + v + 2)) && (*(V + 30 + v) > SIGMIN)) { - // (case 3) + /* (case 3) */ swp_freq = fOSC * 1000 + afcex_freq; *SIG1 = *(V + 30 + v); } else if ((*(V + 30 + v) >= 0) && (*(V + 30 + v + 1) >= 0) && (*(V + 30 + v + 2) >= 0) && - (*(V +30 + v + 3) >= 0) && + (*(V + 30 + v + 3) >= 0) && (*(V + 30 + v + 1) > *(V + 30 + v)) && (*(V + 30 + v + 2) > *(V + 30 + v + 3)) && ((*(V + 30 + v + 1) > SIGMIN) || (*(V + 30 + v + 2) > SIGMIN))) { - // (case 4) + /* (case 4) */ if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) { swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; *SIG1 = *(V + 30 + v + 1); @@ -889,7 +889,7 @@ static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V (*(V + 30 + v + 1) > *(V + 30 + v + 3)) && ((*(V + 30 + v) > SIGMIN) || (*(V + 30 + v + 1) > SIGMIN))) { - // (case 5) + /* (case 5) */ if (*(V + 30 + v) >= *(V + 30 + v + 1)) { swp_freq = fOSC * 1000 + afcex_freq; *SIG1 = *(V + 30 + v); @@ -905,7 +905,7 @@ static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V (*(V + 30 + v + 2) > *(V + 30 + v)) && ((*(V + 30 + v + 1) > SIGMIN) || (*(V + 30 + v + 2) > SIGMIN))) { - // (case 6) + /* (case 6) */ if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) { swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; *SIG1 = *(V + 30 + v + 1); @@ -916,8 +916,10 @@ static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V } else if ((vmax == 0) && (vmin == 0) && (*(V + 30 + v) > SIGMIN)) { swp_freq = fOSC * 1000; *SIG1 = *(V + 30 + v); - } else swp_freq = -1; - } else swp_freq = -1; + } else + swp_freq = -1; + } else + swp_freq = -1; return swp_freq; } @@ -962,7 +964,7 @@ static void afcex_info_get(struct mb86a16_state *state, static int SEQ_set(struct mb86a16_state *state, unsigned char loop) { - // SLOCK0 = 0 + /* SLOCK0 = 0 */ if (mb86a16_write(state, 0x32, 0x02 | (loop << 2)) < 0) { dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); return -EREMOTEIO; @@ -973,7 +975,7 @@ static int SEQ_set(struct mb86a16_state *state, unsigned char loop) static int iq_vt_set(struct mb86a16_state *state, unsigned char IQINV) { - // Viterbi Rate, IQ Settings + /* Viterbi Rate, IQ Settings */ if (mb86a16_write(state, 0x06, 0xdf | (IQINV << 5)) < 0) { dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); return -EREMOTEIO; @@ -1031,7 +1033,7 @@ static int mb86a16_set_fe(struct mb86a16_state *state) unsigned char TIMINT1, TIMINT2, TIMEXT; unsigned char S0T, S1T; unsigned char S2T; -// unsigned char S2T, S3T; +/* unsigned char S2T, S3T; */ unsigned char S4T, S5T; unsigned char AFCEX_L, AFCEX_H; unsigned char R; @@ -1052,7 +1054,7 @@ static int mb86a16_set_fe(struct mb86a16_state *state) int temp_freq, delta_freq; int dagcm[4]; int smrt_d; -// int freq_err; +/* int freq_err; */ int n; int ret = -1; int sync; @@ -1093,19 +1095,19 @@ static int mb86a16_set_fe(struct mb86a16_state *state) } if (EN_set(state, CREN, AFCEN) < 0) { dprintk(verbose, MB86A16_ERROR, 1, "EN set error"); - return -1; // (0, 0) + return -1; /* (0, 0) */ } if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) { dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); - return -1; // (1, smrt) = (1, symbolrate) + return -1; /* (1, smrt) = (1, symbolrate) */ } if (CNTM_set(state, TIMINT1, TIMINT2, TIMEXT) < 0) { dprintk(verbose, MB86A16_ERROR, 1, "CNTM set error"); - return -1; // (0, 1, 2) + return -1; /* (0, 1, 2) */ } if (S01T_set(state, S1T, S0T) < 0) { dprintk(verbose, MB86A16_ERROR, 1, "S01T set error"); - return -1; // (0, 0) + return -1; /* (0, 0) */ } smrt_info_get(state, state->srate); if (smrt_set(state, state->srate) < 0) { @@ -1133,13 +1135,15 @@ static int mb86a16_set_fe(struct mb86a16_state *state) ftemp = ftemp + swp_ofs; vmax++; - // Upper bound + /* Upper bound */ if (ftemp > 2150000) { loop = 0; vmax--; + } else { + if ((ftemp == 2150000) || + (ftemp - state->frequency * 1000 >= fcp + state->srate / 4)) + loop = 0; } - else if ((ftemp == 2150000) || (ftemp - state->frequency * 1000 >= fcp + state->srate / 4)) - loop = 0; } loop = 1; @@ -1149,13 +1153,15 @@ static int mb86a16_set_fe(struct mb86a16_state *state) ftemp = ftemp - swp_ofs; vmin--; - // Lower bound + /* Lower bound */ if (ftemp < 950000) { loop = 0; vmin++; + } else { + if ((ftemp == 950000) || + (state->frequency * 1000 - ftemp >= fcp + state->srate / 4)) + loop = 0; } - else if ((ftemp == 950000) || (state->frequency * 1000 - ftemp >= fcp + state->srate / 4)) - loop = 0; } wait_t = (8000 + state->srate / 2) / state->srate; @@ -1199,7 +1205,7 @@ static int mb86a16_set_fe(struct mb86a16_state *state) V[30 + v] = SIG1 ; swp_freq = swp_freq_calcuation(state, i, v, V, vmax, vmin, SIG1MIN, fOSC, afcex_freq, - swp_ofs, &SIG1); //changed + swp_ofs, &SIG1); /* changed */ signal_dupl = 0; for (j = 0; j < prev_freq_num; j++) { @@ -1291,7 +1297,7 @@ static int mb86a16_set_fe(struct mb86a16_state *state) dprintk(verbose, MB86A16_ERROR, 1, "srst error"); return -1; } - // delay 4~200 + /* delay 4~200 */ wait_t = 200000 / state->master_clk + 200000 / state->srate; msleep(wait_t); afcerr = afcerr_chk(state); @@ -1452,7 +1458,7 @@ static int mb86a16_set_fe(struct mb86a16_state *state) S2T = 7; S4T = 2; S5T = 8; ETH = 7; VIA = 2; wait_t = 7 + (2097152 + state->srate / 2) / state->srate; } - wait_t *= 2; /* FOS */ + wait_t *= 2; /* FOS */ S2T_set(state, S2T); S45T_set(state, S4T, S5T); Vi_set(state, ETH, VIA); @@ -1461,13 +1467,14 @@ static int mb86a16_set_fe(struct mb86a16_state *state) sync = sync_chk(state, &VIRM); dprintk(verbose, MB86A16_INFO, 1, "-------- Viterbi=[%d] SYNC=[%d] ---------", VIRM, sync); if (VIRM) { - if (VIRM == 4) { // 5/6 + if (VIRM == 4) { + /* 5/6 */ if (SIG1 > 110) - wait_t = ( 786432 + state->srate / 2) / state->srate; + wait_t = (786432 + state->srate / 2) / state->srate; else wait_t = (1572864 + state->srate / 2) / state->srate; if (state->srate < 5000) - // FIXME ! , should be a long wait ! + /* FIXME ! , should be a long wait ! */ msleep_interruptible(wait_t); else msleep_interruptible(wait_t); @@ -1477,9 +1484,9 @@ static int mb86a16_set_fe(struct mb86a16_state *state) FEC_srst(state); } } - // 1/2, 2/3, 3/4, 7/8 + /* 1/2, 2/3, 3/4, 7/8 */ if (SIG1 > 110) - wait_t = ( 786432 + state->srate / 2) / state->srate; + wait_t = (786432 + state->srate / 2) / state->srate; else wait_t = (1572864 + state->srate / 2) / state->srate; msleep_interruptible(wait_t); @@ -1491,7 +1498,7 @@ static int mb86a16_set_fe(struct mb86a16_state *state) } } } else { - dprintk (verbose, MB86A16_INFO, 1, "NO -- SIGNAL"); + dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL"); ret = -1; } @@ -1846,7 +1853,7 @@ struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, u8 dev_id = 0; struct mb86a16_state *state = NULL; - state = kmalloc(sizeof (struct mb86a16_state), GFP_KERNEL); + state = kmalloc(sizeof(struct mb86a16_state), GFP_KERNEL); if (state == NULL) goto error; @@ -1857,7 +1864,7 @@ struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, if (dev_id != 0xfe) goto error; - memcpy(&state->frontend.ops, &mb86a16_ops, sizeof (struct dvb_frontend_ops)); + memcpy(&state->frontend.ops, &mb86a16_ops, sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; state->frontend.ops.set_voltage = state->config->set_voltage; diff --git a/drivers/media/dvb/frontends/mb86a16.h b/drivers/media/dvb/frontends/mb86a16.h index b7545d0343f1..68f25a640173 100644 --- a/drivers/media/dvb/frontends/mb86a16.h +++ b/drivers/media/dvb/frontends/mb86a16.h @@ -35,4 +35,4 @@ extern struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, struct i2c_adapter *i2c_adap); -#endif //__MB86A16_H +#endif /* __MB86A16_H */ diff --git a/drivers/media/dvb/frontends/mb86a16_priv.h b/drivers/media/dvb/frontends/mb86a16_priv.h index 5de570068060..d8757fafcf1f 100644 --- a/drivers/media/dvb/frontends/mb86a16_priv.h +++ b/drivers/media/dvb/frontends/mb86a16_priv.h @@ -148,4 +148,4 @@ #define MB86A16_DISTMON 0x52 #define MB86A16_VERSION 0x7f -#endif //__MB86A16_PRIV_H +#endif /* __MB86A16_PRIV_H */ diff --git a/drivers/media/dvb/frontends/tda665x.c b/drivers/media/dvb/frontends/tda665x.c index 0732a2d38e10..87d52739c828 100644 --- a/drivers/media/dvb/frontends/tda665x.c +++ b/drivers/media/dvb/frontends/tda665x.c @@ -45,7 +45,7 @@ static int tda665x_read(struct tda665x_state *state, u8 *buf) return err; exit: - printk("%s: I/O Error err=<%d>\n", __func__, err); + printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err); return err; } @@ -61,7 +61,7 @@ static int tda665x_write(struct tda665x_state *state, u8 *buf, u8 length) return err; exit: - printk("%s: I/O Error err=<%d>\n", __func__, err); + printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err); return err; } @@ -79,7 +79,7 @@ static int tda665x_get_state(struct dvb_frontend *fe, case DVBFE_TUNER_BANDWIDTH: break; default: - printk("%s: Unknown parameter (param=%d)\n", __func__, param); + printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param); err = -EINVAL; break; } @@ -100,13 +100,13 @@ static int tda665x_get_status(struct dvb_frontend *fe, u32 *status) goto exit; if ((result >> 6) & 0x01) { - printk("%s: Tuner Phase Locked\n", __func__); + printk(KERN_DEBUG "%s: Tuner Phase Locked\n", __func__); *status = 1; } return err; exit: - printk("%s: I/O Error\n", __func__); + printk(KERN_ERR "%s: I/O Error\n", __func__); return err; } @@ -124,7 +124,7 @@ static int tda665x_set_state(struct dvb_frontend *fe, frequency = tstate->frequency; if ((frequency < config->frequency_max) || (frequency > config->frequency_min)) { - printk("%s: Frequency beyond limits, frequency=%d\n", __func__, frequency); + printk(KERN_ERR "%s: Frequency beyond limits, frequency=%d\n", __func__, frequency); return -EINVAL; } @@ -133,8 +133,8 @@ static int tda665x_set_state(struct dvb_frontend *fe, frequency += config->ref_divider >> 1; frequency /= config->ref_divider; - buf[0] = (u8 ) (frequency & 0x7f00) >> 8; - buf[1] = (u8 ) (frequency & 0x00ff) >> 0; + buf[0] = (u8) (frequency & 0x7f00) >> 8; + buf[1] = (u8) (frequency & 0x00ff) >> 0; buf[2] = 0x80 | 0x40 | 0x02; buf[3] = 0x00; @@ -178,7 +178,7 @@ static int tda665x_set_state(struct dvb_frontend *fe, goto exit; /* sleep for some time */ - printk("%s: Waiting to Phase LOCK\n", __func__); + printk(KERN_DEBUG "%s: Waiting to Phase LOCK\n", __func__); msleep(20); /* check status */ err = tda665x_get_status(fe, &status); @@ -186,19 +186,19 @@ static int tda665x_set_state(struct dvb_frontend *fe, goto exit; if (status == 1) { - printk("%s: Tuner Phase locked: status=%d\n", __func__, status); + printk(KERN_DEBUG "%s: Tuner Phase locked: status=%d\n", __func__, status); state->frequency = frequency; /* cache successful state */ } else { - printk("%s: No Phase lock: status=%d\n", __func__, status); + printk(KERN_ERR "%s: No Phase lock: status=%d\n", __func__, status); } } else { - printk("%s: Unknown parameter (param=%d)\n", __func__, param); + printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param); return -EINVAL; } return 0; exit: - printk("%s: I/O Error\n", __func__); + printk(KERN_ERR "%s: I/O Error\n", __func__); return err; } @@ -226,7 +226,7 @@ struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, struct tda665x_state *state = NULL; struct dvb_tuner_info *info; - state = kzalloc(sizeof (struct tda665x_state), GFP_KERNEL); + state = kzalloc(sizeof(struct tda665x_state), GFP_KERNEL); if (state == NULL) goto exit; @@ -237,12 +237,12 @@ struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, fe->ops.tuner_ops = tda665x_ops; info = &fe->ops.tuner_ops.info; - memcpy(info->name, config->name, sizeof (config->name)); + memcpy(info->name, config->name, sizeof(config->name)); info->frequency_min = config->frequency_min; info->frequency_max = config->frequency_max; info->frequency_step = config->frequency_offst; - printk("%s: Attaching TDA665x (%s) tuner\n", __func__, info->name); + printk(KERN_DEBUG "%s: Attaching TDA665x (%s) tuner\n", __func__, info->name); return fe; diff --git a/drivers/media/dvb/frontends/tda665x.h b/drivers/media/dvb/frontends/tda665x.h index c0b544d8ef57..ec7927aa75ae 100644 --- a/drivers/media/dvb/frontends/tda665x.h +++ b/drivers/media/dvb/frontends/tda665x.h @@ -40,7 +40,7 @@ extern struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, #else static inline struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, - const struct tda665x_config *config, + const struct tda665x_config *config, struct i2c_adapter *i2c) { printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c index 6d5d101f0ab0..ca70149f3ddf 100644 --- a/drivers/media/dvb/mantis/hopper_cards.c +++ b/drivers/media/dvb/mantis/hopper_cards.c @@ -137,7 +137,7 @@ static int __devinit hopper_pci_probe(struct pci_dev *pdev, const struct pci_dev struct mantis_hwconfig *config; int err = 0; - mantis = kzalloc(sizeof (struct mantis_pci), GFP_KERNEL); + mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL); if (mantis == NULL) { printk(KERN_ERR "%s ERROR: Out of memory\n", __func__); err = -ENOMEM; diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index 88899ac96d63..2f3ba81eaa07 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -119,7 +119,7 @@ static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot) struct mantis_pci *mantis = ca->ca_priv; dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot); -// mantis_set_direction(mantis, 1); /* Enable TS through CAM */ +/* mantis_set_direction(mantis, 1); */ /* Enable TS through CAM */ return 0; } @@ -148,7 +148,7 @@ int mantis_ca_init(struct mantis_pci *mantis) int ca_flags = 0, result; dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA"); - ca = kzalloc(sizeof (struct mantis_ca), GFP_KERNEL); + ca = kzalloc(sizeof(struct mantis_ca), GFP_KERNEL); if (!ca) { dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting .."); result = -ENOMEM; diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c index f3fefbbc876f..a4250fad6ac1 100644 --- a/drivers/media/dvb/mantis/mantis_cards.c +++ b/drivers/media/dvb/mantis/mantis_cards.c @@ -145,7 +145,7 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_dev struct mantis_hwconfig *config; int err = 0; - mantis = kzalloc(sizeof (struct mantis_pci), GFP_KERNEL); + mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL); if (mantis == NULL) { printk(KERN_ERR "%s ERROR: Out of memory\n", __func__); err = -ENOMEM; diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c index 52b3e9ebfcfa..3ddc9ba8440f 100644 --- a/drivers/media/dvb/mantis/mantis_core.c +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -36,14 +36,16 @@ static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) .flags = 0, .buf = data, .len = 1 - },{ + }, { .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length }, }; - if ((err = i2c_transfer(&mantis->adapter, msg, 2)) < 0) { + + err = i2c_transfer(&mantis->adapter, msg, 2); + if (err < 0) { dprintk(verbose, MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >", err, data[0], data[1]); @@ -65,7 +67,8 @@ static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) .len = length }; - if ((err = i2c_transfer(&mantis->adapter, &msg, 1)) < 0) { + err = i2c_transfer(&mantis->adapter, &msg, 1); + if (err < 0) { dprintk(verbose, MANTIS_ERROR, 1, "ERROR: i2c write: < err=%i length=0x%02x d0=0x%02x, d1=0x%02x >", err, length, data[0], data[1]); @@ -81,7 +84,8 @@ static int get_mac_address(struct mantis_pci *mantis) int err; mantis->mac_address[0] = 0x08; - if ((err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6)) < 0) { + err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6); + if (err < 0) { dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error"); return err; @@ -106,25 +110,25 @@ struct mantis_hwconfig unknown_device = { static void mantis_load_config(struct mantis_pci *mantis) { switch (mantis->subsystem_device) { - case MANTIS_VP_1033_DVB_S: // VP-1033 + case MANTIS_VP_1033_DVB_S: /* VP-1033 */ mantis->hwconfig = &vp1033_mantis_config; break; - case MANTIS_VP_1034_DVB_S: // VP-1034 + case MANTIS_VP_1034_DVB_S: /* VP-1034 */ mantis->hwconfig = &vp1034_mantis_config; break; - case MANTIS_VP_1041_DVB_S2: // VP-1041 + case MANTIS_VP_1041_DVB_S2: /* VP-1041 */ case TECHNISAT_SKYSTAR_HD2: mantis->hwconfig = &vp1041_mantis_config; break; - case MANTIS_VP_2033_DVB_C: // VP-2033 + case MANTIS_VP_2033_DVB_C: /* VP-2033 */ mantis->hwconfig = &vp2033_mantis_config; break; - case MANTIS_VP_2040_DVB_C: // VP-2040 - case TERRATEC_CINERGY_C_PCI: // VP-2040 clone + case MANTIS_VP_2040_DVB_C: /* VP-2040 */ + case TERRATEC_CINERGY_C_PCI: /* VP-2040 clone */ case TECHNISAT_CABLESTAR_HD2: mantis->hwconfig = &vp2040_mantis_config; break; - case MANTIS_VP_3030_DVB_T: // VP-3030 + case MANTIS_VP_3030_DVB_T: /* VP-3030 */ mantis->hwconfig = &vp3030_mantis_config; break; default: @@ -149,23 +153,28 @@ int mantis_core_init(struct mantis_pci *mantis) mantis->pdev->irq, mantis->latency, mantis->mantis_addr, mantis->mantis_mmio); - if ((err = mantis_i2c_init(mantis)) < 0) { + err = mantis_i2c_init(mantis); + if (err < 0) { dprintk(verbose, MANTIS_ERROR, 1, "Mantis I2C init failed"); return err; } - if ((err = get_mac_address(mantis)) < 0) { + err = get_mac_address(mantis); + if (err < 0) { dprintk(verbose, MANTIS_ERROR, 1, "get MAC address failed"); return err; } - if ((err = mantis_dma_init(mantis)) < 0) { + err = mantis_dma_init(mantis); + if (err < 0) { dprintk(verbose, MANTIS_ERROR, 1, "Mantis DMA init failed"); return err; } - if ((err = mantis_dvb_init(mantis)) < 0) { + err = mantis_dvb_init(mantis); + if (err < 0) { dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB init failed"); return err; } - if ((err = mantis_uart_init(mantis)) < 0) { + err = mantis_uart_init(mantis); + if (err < 0) { dprintk(verbose, MANTIS_DEBUG, 1, "Mantis UART init failed"); return err; } @@ -191,7 +200,7 @@ int mantis_core_exit(struct mantis_pci *mantis) return 0; } -// Turn the given bit on or off. +/* Turn the given bit on or off. */ void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value) { u32 cur; @@ -207,14 +216,15 @@ void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value) udelay(100); } -//direction = 0 , no CI passthrough ; 1 , CI passthrough +/* direction = 0 , no CI passthrough ; 1 , CI passthrough */ void mantis_set_direction(struct mantis_pci *mantis, int direction) { u32 reg; reg = mmread(0x28); dprintk(verbose, MANTIS_DEBUG, 1, "TS direction setup"); - if (direction == 0x01) { //to CI + if (direction == 0x01) { + /* to CI */ reg |= 0x04; mmwrite(reg, 0x28); reg &= 0xff - 0x04; diff --git a/drivers/media/dvb/mantis/mantis_core.h b/drivers/media/dvb/mantis/mantis_core.h index a80939409935..8511b0cebac1 100644 --- a/drivers/media/dvb/mantis/mantis_core.h +++ b/drivers/media/dvb/mantis/mantis_core.h @@ -33,15 +33,15 @@ struct vendorname { - __u8 *sub_vendor_name; - __u32 sub_vendor_id; + u8 *sub_vendor_name; + u32 sub_vendor_id; }; struct devicetype { - __u8 *sub_device_name; - __u32 sub_device_id; - __u8 device_type; - __u32 type_flags; + u8 *sub_device_name; + u32 sub_device_id; + u8 device_type; + u32 type_flags; }; @@ -54,4 +54,4 @@ extern int mantis_i2c_exit(struct mantis_pci *mantis); extern int mantis_core_init(struct mantis_pci *mantis); extern int mantis_core_exit(struct mantis_pci *mantis); -#endif //__MANTIS_CORE_H +#endif /* __MANTIS_CORE_H */ diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c index eab3645f7acb..adad1f37efde 100644 --- a/drivers/media/dvb/mantis/mantis_dma.c +++ b/drivers/media/dvb/mantis/mantis_dma.c @@ -43,10 +43,10 @@ #define RISC_IRQ (0x01 << 24) #define RISC_STATUS(status) ((((~status) & 0x0f) << 20) | ((status & 0x0f) << 16)) -#define RISC_FLUSH() mantis->risc_pos = 0 -#define RISC_INSTR(opcode) mantis->risc_cpu[mantis->risc_pos++] = cpu_to_le32(opcode) +#define RISC_FLUSH() (mantis->risc_pos = 0) +#define RISC_INSTR(opcode) (mantis->risc_cpu[mantis->risc_pos++] = cpu_to_le32(opcode)) -#define MANTIS_BUF_SIZE 64 * 1024 +#define MANTIS_BUF_SIZE (64 * 1024) #define MANTIS_BLOCK_BYTES (MANTIS_BUF_SIZE >> 4) #define MANTIS_BLOCK_COUNT (1 << 4) #define MANTIS_RISC_SIZE PAGE_SIZE @@ -158,7 +158,8 @@ int mantis_dma_init(struct mantis_pci *mantis) goto err; } - if ((err = mantis_calc_lines(mantis)) < 0) { + err = mantis_calc_lines(mantis); + if (err < 0) { dprintk(MANTIS_ERROR, 1, "Mantis calc lines failed"); goto err; @@ -248,7 +249,7 @@ void mantis_dma_xfer(unsigned long data) dprintk(MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]", mantis->last_block, mantis->finished_block); - (config->ts_size ? dvb_dmx_swfilter_204: dvb_dmx_swfilter) + (config->ts_size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter) (&mantis->demux, &mantis->buf_cpu[mantis->last_block * MANTIS_BLOCK_BYTES], MANTIS_BLOCK_BYTES); mantis->last_block = (mantis->last_block + 1) % MANTIS_BLOCK_COUNT; } diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index 54bf4ea9efd7..8982d6fdf6be 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -116,7 +116,6 @@ static int mantis_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) if (mantis->feeds == 1) { dprintk(MANTIS_DEBUG, 1, "mantis start feed & dma"); - printk("mantis start feed & dma\n"); mantis_dma_start(mantis); } @@ -137,7 +136,6 @@ static int mantis_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) mantis->feeds--; if (mantis->feeds == 0) { dprintk(MANTIS_DEBUG, 1, "mantis stop feed and dma"); - printk("mantis stop feed and dma\n"); mantis_dma_stop(mantis); } @@ -204,9 +202,9 @@ int __devinit mantis_dvb_init(struct mantis_pci *mantis) } mantis->fe_mem.source = DMX_MEMORY_FE; - result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx,&mantis->fe_mem); + result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_mem); if (result < 0) { - dprintk(MANTIS_ERROR, 1,"dvb_dmx_init failed, ERROR=%d", result); + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); goto err3; } @@ -224,10 +222,6 @@ int __devinit mantis_dvb_init(struct mantis_pci *mantis) dprintk(MANTIS_ERROR, 1, "!!! NO Frontends found !!!"); goto err5; } else { -// if (mantis->dvb_adapter == NULL) { -// dprintk(MANTIS_ERROR, 1, "DVB adapter "); -// goto err5; -// } if (mantis->fe == NULL) { dprintk(MANTIS_ERROR, 1, "FE "); goto err5; @@ -277,7 +271,7 @@ int __devexit mantis_dvb_exit(struct mantis_pci *mantis) int err; if (mantis->fe) { -// mantis_ca_exit(mantis); + /* mantis_ca_exit(mantis); */ err = mantis_frontend_shutdown(mantis); if (err != 0) dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err); diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c index 7bb4e78aa714..dd38b9333537 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.c +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -225,7 +225,7 @@ int __devinit mantis_i2c_init(struct mantis_pci *mantis) init_waitqueue_head(&mantis->i2c_wq); mutex_init(&mantis->i2c_lock); - strncpy(i2c_adapter->name, "Mantis I2C", sizeof (i2c_adapter->name)); + strncpy(i2c_adapter->name, "Mantis I2C", sizeof(i2c_adapter->name)); i2c_set_adapdata(i2c_adapter, mantis); i2c_adapter->owner = THIS_MODULE; diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c index b27d7759788b..487d149c802d 100644 --- a/drivers/media/dvb/mantis/mantis_input.c +++ b/drivers/media/dvb/mantis/mantis_input.c @@ -36,9 +36,9 @@ static struct ir_scancode mantis_ir_table[] = { { 0x29, KEY_POWER }, { 0x28, KEY_FAVORITES }, { 0x30, KEY_TEXT }, - { 0x17, KEY_INFO }, // Preview + { 0x17, KEY_INFO }, /* Preview */ { 0x23, KEY_EPG }, - { 0x3b, KEY_F22 },// Record List + { 0x3b, KEY_F22 }, /* Record List */ { 0x3c, KEY_1 }, { 0x3e, KEY_2 }, { 0x39, KEY_3 }, @@ -71,22 +71,22 @@ static struct ir_scancode mantis_ir_table[] = { { 0x1f, KEY_REWIND }, { 0x2d, KEY_FASTFORWARD }, - { 0x1e, KEY_PREVIOUS }, // Replay |< - { 0x1d, KEY_NEXT }, // Skip >| + { 0x1e, KEY_PREVIOUS }, /* Replay |< */ + { 0x1d, KEY_NEXT }, /* Skip >| */ - { 0x0b, KEY_CAMERA }, // Capture - { 0x0f, KEY_LANGUAGE }, // SAP - { 0x18, KEY_MODE }, // PIP - { 0x12, KEY_ZOOM }, // Full screen, + { 0x0b, KEY_CAMERA }, /* Capture */ + { 0x0f, KEY_LANGUAGE }, /* SAP */ + { 0x18, KEY_MODE }, /* PIP */ + { 0x12, KEY_ZOOM }, /* Full screen */ { 0x1c, KEY_SUBTITLE }, { 0x2f, KEY_MUTE }, - { 0x16, KEY_F20 }, // L/R, - { 0x38, KEY_F21 }, // Hibernate, + { 0x16, KEY_F20 }, /* L/R */ + { 0x38, KEY_F21 }, /* Hibernate */ - { 0x37, KEY_SWITCHVIDEOMODE }, // A/V - { 0x31, KEY_AGAIN }, // Recall, - { 0x1a, KEY_KPPLUS }, // Zoom+, - { 0x19, KEY_KPMINUS }, // Zoom-, + { 0x37, KEY_SWITCHVIDEOMODE }, /* A/V */ + { 0x31, KEY_AGAIN }, /* Recall */ + { 0x1a, KEY_KPPLUS }, /* Zoom+ */ + { 0x19, KEY_KPMINUS }, /* Zoom- */ { 0x27, KEY_RED }, { 0x0C, KEY_GREEN }, { 0x01, KEY_YELLOW }, diff --git a/drivers/media/dvb/mantis/mantis_reg.h b/drivers/media/dvb/mantis/mantis_reg.h index 0072e149a561..c2f572b49faf 100644 --- a/drivers/media/dvb/mantis/mantis_reg.h +++ b/drivers/media/dvb/mantis/mantis_reg.h @@ -29,7 +29,7 @@ #define MANTIS_INT_RISCEN (0x01 << 27) #define MANTIS_INT_I2CRACK (0x01 << 26) -//#define MANTIS_INT_GPIF (0xff << 12) +/* #define MANTIS_INT_GPIF (0xff << 12) */ #define MANTIS_INT_PCMCIA7 (0x01 << 19) #define MANTIS_INT_PCMCIA6 (0x01 << 18) diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c index c9760b00d0ab..3c62be30bbb6 100644 --- a/drivers/media/dvb/mantis/mantis_vp1033.c +++ b/drivers/media/dvb/mantis/mantis_vp1033.c @@ -93,7 +93,7 @@ int lgtdqcs001f_tuner_set(struct dvb_frontend *fe, u32 div; - struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof (buf) }; + struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf)}; div = params->frequency / 250; @@ -140,12 +140,12 @@ int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe, aclk = 0xb4; bclk = 0x51; } - stv0299_writereg (fe, 0x13, aclk); - stv0299_writereg (fe, 0x14, bclk); + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); - stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); - stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); - stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, ratio & 0xf0); return 0; } diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c index 7ddd149b0fea..36486b53f677 100644 --- a/drivers/media/dvb/mantis/mantis_vp1034.c +++ b/drivers/media/dvb/mantis/mantis_vp1034.c @@ -62,7 +62,7 @@ int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN"); break; default: - dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32 ) voltage); + dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32) voltage); return -EINVAL; } mmwrite(0x00, MANTIS_GPIF_DOUT); diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c index 368fc815a61d..515346dd31d0 100644 --- a/drivers/media/dvb/mantis/mantis_vp1041.c +++ b/drivers/media/dvb/mantis/mantis_vp1041.c @@ -44,7 +44,7 @@ static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = { -// 0x0000000b , /* SYSREG */ + /* 0x0000000b, *//* SYSREG */ { STB0899_DEV_ID , 0x30 }, { STB0899_DISCNTRL1 , 0x32 }, { STB0899_DISCNTRL2 , 0x80 }, @@ -55,7 +55,7 @@ static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = { { STB0899_DISSTATUS , 0x20 }, { STB0899_DISF22 , 0x99 }, { STB0899_DISF22RX , 0xa8 }, - //SYSREG ? + /* SYSREG ? */ { STB0899_ACRPRESC , 0x11 }, { STB0899_ACRDIV1 , 0x0a }, { STB0899_ACRDIV2 , 0x05 }, @@ -323,9 +323,8 @@ static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend * vp1041_stb0899_config.demod_address); if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, adapter)) { - if (!lnbp21_attach(mantis->fe, adapter, 0, 0)) { - printk("%s: No LNBP21 found!\n", __func__); - } + if (!lnbp21_attach(mantis->fe, adapter, 0, 0)) + dprintk(MANTIS_ERROR, 1, "No LNBP21 found!"); } } else { return -EREMOTEIO; diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c index 45f71749bb98..07d468ff5e13 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.c +++ b/drivers/media/dvb/mantis/mantis_vp2033.c @@ -71,7 +71,7 @@ static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_fronten struct i2c_adapter *adapter = &mantis->adapter; u8 buf[6]; - struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof (buf) }; + struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)}; int i; #define CU1216_IF 36125000 diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c index 8471bff672f3..a7ca233e800b 100644 --- a/drivers/media/dvb/mantis/mantis_vp2040.c +++ b/drivers/media/dvb/mantis/mantis_vp2040.c @@ -53,7 +53,7 @@ static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_fronten struct i2c_adapter *adapter = &mantis->adapter; u8 buf[6]; - struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof (buf) }; + struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)}; int i; #define CU1216_IF 36125000 From 28fddb7cd5b7a12b81c8ec1a358749e60760e741 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Tue, 15 Dec 2009 09:01:27 -0300 Subject: [PATCH 1130/1626] V4L/DVB (13810): [MB86A16] Use DVB_* macros Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a16.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/media/dvb/frontends/mb86a16.h b/drivers/media/dvb/frontends/mb86a16.h index 68f25a640173..a88a6a1febf8 100644 --- a/drivers/media/dvb/frontends/mb86a16.h +++ b/drivers/media/dvb/frontends/mb86a16.h @@ -31,8 +31,22 @@ struct mb86a16_config { int (*set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); }; + + +#if defined(CONFIG_DVB_MB86A16) || (defined(CONFIG_DVB_MB86A16_MODULE) && defined(MODULE)) + extern struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, struct i2c_adapter *i2c_adap); +#else + +static inline struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, + struct i2c_adapter *i2c_adap) +{ + printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); + return NULL; +} + +#endif /* CONFIG_DVB_MB86A16 */ #endif /* __MB86A16_H */ From 4cd191fba45ee3cf3035d7e4d3a942979cd9c5e4 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Tue, 15 Dec 2009 09:04:59 -0300 Subject: [PATCH 1131/1626] V4L/DVB (13811): [MB86A16] Update Copyright header Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a16.c | 2 +- drivers/media/dvb/frontends/mb86a16.h | 2 +- drivers/media/dvb/frontends/mb86a16_priv.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c index 32f20c681442..d05f7500e0c5 100644 --- a/drivers/media/dvb/frontends/mb86a16.c +++ b/drivers/media/dvb/frontends/mb86a16.c @@ -1,7 +1,7 @@ /* Fujitsu MB86A16 DVB-S/DSS DC Receiver driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/mb86a16.h b/drivers/media/dvb/frontends/mb86a16.h index a88a6a1febf8..6ea8c376394f 100644 --- a/drivers/media/dvb/frontends/mb86a16.h +++ b/drivers/media/dvb/frontends/mb86a16.h @@ -1,7 +1,7 @@ /* Fujitsu MB86A16 DVB-S/DSS DC Receiver driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/mb86a16_priv.h b/drivers/media/dvb/frontends/mb86a16_priv.h index d8757fafcf1f..360a35acfe84 100644 --- a/drivers/media/dvb/frontends/mb86a16_priv.h +++ b/drivers/media/dvb/frontends/mb86a16_priv.h @@ -1,7 +1,7 @@ /* Fujitsu MB86A16 DVB-S/DSS DC Receiver driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by From 8825a0970cef408fb2f1a44e3cb05d6ba41a18db Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Tue, 15 Dec 2009 09:13:49 -0300 Subject: [PATCH 1132/1626] V4L/DVB (13812): [Mantis/Hopper] Update Copyright header Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/hopper_cards.c | 20 ++++++++++++++++++++ drivers/media/dvb/mantis/hopper_vp3028.c | 4 ++-- drivers/media/dvb/mantis/hopper_vp3028.h | 20 ++++++++++++++++++++ drivers/media/dvb/mantis/mantis_ca.c | 2 +- drivers/media/dvb/mantis/mantis_ca.h | 20 ++++++++++++++++++++ drivers/media/dvb/mantis/mantis_cards.c | 20 ++++++++++++++++++++ drivers/media/dvb/mantis/mantis_common.h | 2 +- drivers/media/dvb/mantis/mantis_core.c | 2 +- drivers/media/dvb/mantis/mantis_core.h | 2 +- drivers/media/dvb/mantis/mantis_dma.c | 2 +- drivers/media/dvb/mantis/mantis_dma.h | 20 ++++++++++++++++++++ drivers/media/dvb/mantis/mantis_dvb.c | 2 +- drivers/media/dvb/mantis/mantis_dvb.h | 20 ++++++++++++++++++++ drivers/media/dvb/mantis/mantis_evm.c | 2 +- drivers/media/dvb/mantis/mantis_hif.c | 2 +- drivers/media/dvb/mantis/mantis_hif.h | 2 +- drivers/media/dvb/mantis/mantis_i2c.c | 2 +- drivers/media/dvb/mantis/mantis_i2c.h | 20 ++++++++++++++++++++ drivers/media/dvb/mantis/mantis_ioc.c | 2 +- drivers/media/dvb/mantis/mantis_ioc.h | 20 ++++++++++++++++++++ drivers/media/dvb/mantis/mantis_link.h | 2 +- drivers/media/dvb/mantis/mantis_pci.c | 2 +- drivers/media/dvb/mantis/mantis_pci.h | 20 ++++++++++++++++++++ drivers/media/dvb/mantis/mantis_pcmcia.c | 2 +- drivers/media/dvb/mantis/mantis_reg.h | 2 +- drivers/media/dvb/mantis/mantis_uart.h | 2 +- drivers/media/dvb/mantis/mantis_vp1033.c | 2 +- drivers/media/dvb/mantis/mantis_vp1033.h | 2 +- drivers/media/dvb/mantis/mantis_vp1034.c | 2 +- drivers/media/dvb/mantis/mantis_vp1034.h | 2 +- drivers/media/dvb/mantis/mantis_vp2033.c | 2 +- drivers/media/dvb/mantis/mantis_vp2033.h | 2 +- drivers/media/dvb/mantis/mantis_vp3028.c | 2 +- drivers/media/dvb/mantis/mantis_vp3028.h | 20 ++++++++++++++++++++ drivers/media/dvb/mantis/mantis_vp3030.c | 2 +- drivers/media/dvb/mantis/mantis_vp3030.h | 2 +- 36 files changed, 227 insertions(+), 27 deletions(-) diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c index ca70149f3ddf..d073c61e3c0d 100644 --- a/drivers/media/dvb/mantis/hopper_cards.c +++ b/drivers/media/dvb/mantis/hopper_cards.c @@ -1,3 +1,23 @@ +/* + Hopper PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + #include #include #include diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/dvb/mantis/hopper_vp3028.c index 76cad8763382..96674c78e86b 100644 --- a/drivers/media/dvb/mantis/hopper_vp3028.c +++ b/drivers/media/dvb/mantis/hopper_vp3028.c @@ -1,7 +1,7 @@ /* - Mantis VP-3028 driver + Hopper VP-3028 driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/hopper_vp3028.h b/drivers/media/dvb/mantis/hopper_vp3028.h index e8a3c2297bb1..57239498bc87 100644 --- a/drivers/media/dvb/mantis/hopper_vp3028.h +++ b/drivers/media/dvb/mantis/hopper_vp3028.h @@ -1,3 +1,23 @@ +/* + Hopper VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + #ifndef __MANTIS_VP3028_H #define __MANTIS_VP3028_H diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c index 2f3ba81eaa07..403ce043d00e 100644 --- a/drivers/media/dvb/mantis/mantis_ca.c +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -1,7 +1,7 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_ca.h b/drivers/media/dvb/mantis/mantis_ca.h index b7e48ee1fac8..dc63e55f7eca 100644 --- a/drivers/media/dvb/mantis/mantis_ca.h +++ b/drivers/media/dvb/mantis/mantis_ca.h @@ -1,3 +1,23 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + #ifndef __MANTIS_CA_H #define __MANTIS_CA_H diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c index a4250fad6ac1..16f1708fd3bc 100644 --- a/drivers/media/dvb/mantis/mantis_cards.c +++ b/drivers/media/dvb/mantis/mantis_cards.c @@ -1,3 +1,23 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + #include #include #include diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index c2d085460e60..d0b645a483c9 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -1,7 +1,7 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c index 3ddc9ba8440f..8113b23ce448 100644 --- a/drivers/media/dvb/mantis/mantis_core.c +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -1,7 +1,7 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_core.h b/drivers/media/dvb/mantis/mantis_core.h index 8511b0cebac1..833ee42e694e 100644 --- a/drivers/media/dvb/mantis/mantis_core.h +++ b/drivers/media/dvb/mantis/mantis_core.h @@ -1,7 +1,7 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c index adad1f37efde..46202a4012aa 100644 --- a/drivers/media/dvb/mantis/mantis_dma.c +++ b/drivers/media/dvb/mantis/mantis_dma.c @@ -1,7 +1,7 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_dma.h b/drivers/media/dvb/mantis/mantis_dma.h index 4cba8763536f..6be00fa82094 100644 --- a/drivers/media/dvb/mantis/mantis_dma.h +++ b/drivers/media/dvb/mantis/mantis_dma.h @@ -1,3 +1,23 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + #ifndef __MANTIS_DMA_H #define __MANTIS_DMA_H diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c index 8982d6fdf6be..99d82eec3b03 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.c +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -1,6 +1,6 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_dvb.h b/drivers/media/dvb/mantis/mantis_dvb.h index 31ebbb47df3e..464199db304e 100644 --- a/drivers/media/dvb/mantis/mantis_dvb.h +++ b/drivers/media/dvb/mantis/mantis_dvb.h @@ -1,3 +1,23 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + #ifndef __MANTIS_DVB_H #define __MANTIS_DVB_H diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c index 9304b0edd89e..a7b369a439d6 100644 --- a/drivers/media/dvb/mantis/mantis_evm.c +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -1,7 +1,7 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c index 73e5ca0c6c14..7477dac628b4 100644 --- a/drivers/media/dvb/mantis/mantis_hif.c +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -1,7 +1,7 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_hif.h b/drivers/media/dvb/mantis/mantis_hif.h index f960c0aeacc4..9094f9ed2362 100644 --- a/drivers/media/dvb/mantis/mantis_hif.h +++ b/drivers/media/dvb/mantis/mantis_hif.h @@ -1,7 +1,7 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c index dd38b9333537..b7df345fe225 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.c +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -1,7 +1,7 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_i2c.h b/drivers/media/dvb/mantis/mantis_i2c.h index d40da4fa0007..1342df2faed8 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.h +++ b/drivers/media/dvb/mantis/mantis_i2c.h @@ -1,3 +1,23 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + #ifndef __MANTIS_I2C_H #define __MANTIS_I2C_H diff --git a/drivers/media/dvb/mantis/mantis_ioc.c b/drivers/media/dvb/mantis/mantis_ioc.c index dd6636999add..de148ded52d8 100644 --- a/drivers/media/dvb/mantis/mantis_ioc.c +++ b/drivers/media/dvb/mantis/mantis_ioc.c @@ -1,7 +1,7 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_ioc.h b/drivers/media/dvb/mantis/mantis_ioc.h index 20526406723b..188fe5a81614 100644 --- a/drivers/media/dvb/mantis/mantis_ioc.h +++ b/drivers/media/dvb/mantis/mantis_ioc.h @@ -1,3 +1,23 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + #ifndef __MANTIS_IOC_H #define __MANTIS_IOC_H diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h index f6030c9fba2d..2a814774a001 100644 --- a/drivers/media/dvb/mantis/mantis_link.h +++ b/drivers/media/dvb/mantis/mantis_link.h @@ -1,7 +1,7 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c index 5165a390e07a..5e4f57615ad1 100644 --- a/drivers/media/dvb/mantis/mantis_pci.c +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -1,7 +1,7 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_pci.h b/drivers/media/dvb/mantis/mantis_pci.h index 5ce776ffcb32..65f004519086 100644 --- a/drivers/media/dvb/mantis/mantis_pci.h +++ b/drivers/media/dvb/mantis/mantis_pci.h @@ -1,3 +1,23 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + #ifndef __MANTIS_PCI_H #define __MANTIS_PCI_H diff --git a/drivers/media/dvb/mantis/mantis_pcmcia.c b/drivers/media/dvb/mantis/mantis_pcmcia.c index d6bca3e58597..5cb545b913f6 100644 --- a/drivers/media/dvb/mantis/mantis_pcmcia.c +++ b/drivers/media/dvb/mantis/mantis_pcmcia.c @@ -1,7 +1,7 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_reg.h b/drivers/media/dvb/mantis/mantis_reg.h index c2f572b49faf..7761f9dc7fe0 100644 --- a/drivers/media/dvb/mantis/mantis_reg.h +++ b/drivers/media/dvb/mantis/mantis_reg.h @@ -1,7 +1,7 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_uart.h b/drivers/media/dvb/mantis/mantis_uart.h index 62ab66ebb971..ffb62a0a5a13 100644 --- a/drivers/media/dvb/mantis/mantis_uart.h +++ b/drivers/media/dvb/mantis/mantis_uart.h @@ -1,7 +1,7 @@ /* Mantis PCI bridge driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c index 3c62be30bbb6..4a723bda0031 100644 --- a/drivers/media/dvb/mantis/mantis_vp1033.c +++ b/drivers/media/dvb/mantis/mantis_vp1033.c @@ -1,7 +1,7 @@ /* Mantis VP-1033 driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_vp1033.h b/drivers/media/dvb/mantis/mantis_vp1033.h index 2c18d2153242..7daaa1bf127d 100644 --- a/drivers/media/dvb/mantis/mantis_vp1033.h +++ b/drivers/media/dvb/mantis/mantis_vp1033.h @@ -1,7 +1,7 @@ /* Mantis VP-1033 driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c index 36486b53f677..8e6ae558ee57 100644 --- a/drivers/media/dvb/mantis/mantis_vp1034.c +++ b/drivers/media/dvb/mantis/mantis_vp1034.c @@ -1,7 +1,7 @@ /* Mantis VP-1034 driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_vp1034.h b/drivers/media/dvb/mantis/mantis_vp1034.h index 30269129066a..323f38ef8e3d 100644 --- a/drivers/media/dvb/mantis/mantis_vp1034.h +++ b/drivers/media/dvb/mantis/mantis_vp1034.h @@ -1,7 +1,7 @@ /* Mantis VP-1034 driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c index 07d468ff5e13..10ce81790a8c 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.c +++ b/drivers/media/dvb/mantis/mantis_vp2033.c @@ -1,7 +1,7 @@ /* Mantis VP-2033 driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_vp2033.h b/drivers/media/dvb/mantis/mantis_vp2033.h index e6c5fe80f726..c55242b79d54 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.h +++ b/drivers/media/dvb/mantis/mantis_vp2033.h @@ -1,7 +1,7 @@ /* Mantis VP-2033 driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_vp3028.c b/drivers/media/dvb/mantis/mantis_vp3028.c index 7f8918c2ce64..4155c838a18a 100644 --- a/drivers/media/dvb/mantis/mantis_vp3028.c +++ b/drivers/media/dvb/mantis/mantis_vp3028.c @@ -1,7 +1,7 @@ /* Mantis VP-3028 driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_vp3028.h b/drivers/media/dvb/mantis/mantis_vp3028.h index c51628ddf3c8..b07be6adc522 100644 --- a/drivers/media/dvb/mantis/mantis_vp3028.h +++ b/drivers/media/dvb/mantis/mantis_vp3028.h @@ -1,3 +1,23 @@ +/* + Mantis VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + #ifndef __MANTIS_VP3028_H #define __MANTIS_VP3028_H diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c index 1895e956b16d..1f4334214953 100644 --- a/drivers/media/dvb/mantis/mantis_vp3030.c +++ b/drivers/media/dvb/mantis/mantis_vp3030.c @@ -1,7 +1,7 @@ /* Mantis VP-3030 driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/mantis/mantis_vp3030.h b/drivers/media/dvb/mantis/mantis_vp3030.h index 0a110ba5c1db..5f12c4266277 100644 --- a/drivers/media/dvb/mantis/mantis_vp3030.h +++ b/drivers/media/dvb/mantis/mantis_vp3030.h @@ -1,7 +1,7 @@ /* Mantis VP-3030 driver - Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) + Copyright (C) Manu Abraham (abraham.manu@gmail.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by From 9c0832e3990b541ea1b8f5d44fe4c204a5e7d396 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 16 Dec 2009 23:57:27 -0200 Subject: [PATCH 1133/1626] V4L/DVB(13808a): mantis: convert it to the new ir-core register/unregister functions Fix a merge conflict between mantis and IR cleanups Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_input.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c index 487d149c802d..6a9df779441f 100644 --- a/drivers/media/dvb/mantis/mantis_input.c +++ b/drivers/media/dvb/mantis/mantis_input.c @@ -118,7 +118,7 @@ int mantis_input_init(struct mantis_pci *mantis) rc->name = name; rc->phys = dev; - ir_input_init(rc, &rc_state, IR_TYPE_OTHER, &ir_mantis); + ir_input_init(rc, &rc_state, IR_TYPE_OTHER); rc->id.bustype = BUS_PCI; rc->id.vendor = mantis->vendor_id; @@ -126,7 +126,7 @@ int mantis_input_init(struct mantis_pci *mantis) rc->id.version = 1; rc->dev = mantis->pdev->dev; - err = input_register_device(rc); + err = ir_input_register(rc, &ir_mantis); if (err) { dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err); input_free_device(rc); @@ -142,7 +142,7 @@ int mantis_exit(struct mantis_pci *mantis) { struct input_dev *rc = mantis->rc; - input_unregister_device(rc); + ir_input_unregister(rc); return 0; } From 8873c61f1fe849bc8719839ddfa3300266f8bc39 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Sat, 5 Dec 2009 01:24:08 -0300 Subject: [PATCH 1134/1626] V4L/DVB (13808): [Mantis/Hopper] Build update for Mantis/Hopper based cards Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/Kconfig | 4 ++++ drivers/media/dvb/Makefile | 14 +++++++++++++- drivers/media/dvb/frontends/Kconfig | 8 ++++++++ drivers/media/dvb/frontends/Makefile | 1 + 4 files changed, 26 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index 35d0817126e9..cf8f65f309da 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -72,6 +72,10 @@ comment "Supported Earthsoft PT1 Adapters" depends on DVB_CORE && PCI && I2C source "drivers/media/dvb/pt1/Kconfig" +comment "Supported Mantis Adapters" + depends on DVB_CORE && PCI && I2C + source "drivers/media/dvb/mantis/Kconfig" + comment "Supported DVB Frontends" depends on DVB_CORE source "drivers/media/dvb/frontends/Kconfig" diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile index 16d262ddb45d..c12922c3659b 100644 --- a/drivers/media/dvb/Makefile +++ b/drivers/media/dvb/Makefile @@ -2,6 +2,18 @@ # Makefile for the kernel multimedia device drivers. # -obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/ pt1/ +obj-y := dvb-core/ \ + frontends/ \ + ttpci/ \ + ttusb-dec/ \ + ttusb-budget/ \ + b2c2/ \ + bt8xx/ \ + dvb-usb/ \ + pluto2/ \ + siano/ \ + dm1105/ \ + pt1/ \ + mantis/ obj-$(CONFIG_DVB_FIREDTV) += firewire/ diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 7820ca084b15..cd7f9b7cbffa 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -208,6 +208,14 @@ config DVB_DS3000 help A DVB-S/S2 tuner module. Say Y when you want to support this frontend. +config DVB_MB86A16 + tristate "Fujitsu MB86A16 based" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S/DSS Direct Conversion reveiver. + Say Y when you want to support this frontend. + comment "DVB-T (terrestrial) frontends" depends on DVB_CORE diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 59f7b8803554..874e8ada4d1d 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -81,3 +81,4 @@ obj-$(CONFIG_DVB_STV6110x) += stv6110x.o obj-$(CONFIG_DVB_ISL6423) += isl6423.o obj-$(CONFIG_DVB_EC100) += ec100.o obj-$(CONFIG_DVB_DS3000) += ds3000.o +obj-$(CONFIG_DVB_MB86A16) += mb86a16.o From 184ac7535ee078a4572b668a348134d67c3977d2 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 17 Dec 2009 00:06:04 -0200 Subject: [PATCH 1135/1626] V4L/DVB (13808b): mantis: replace DMA_nnBIT_MASK to DMA_BIT_MASK(32) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/media/dvb/mantis/mantis_pci.c: In function ‘mantis_pci_init’: drivers/media/dvb/mantis/mantis_pci.c:76: warning: ‘DMA_nnBIT_MASK’ is deprecated Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c index 5e4f57615ad1..e7cd8aabd887 100644 --- a/drivers/media/dvb/mantis/mantis_pci.c +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -73,7 +73,7 @@ int __devinit mantis_pci_init(struct mantis_pci *mantis) goto fail0; } - err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); if (err != 0) { dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err); ret = -ENOMEM; From 4cf0b3f130a4fe573077e4d0237fd3dd0f67d3f6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 18 Dec 2009 09:58:46 -0200 Subject: [PATCH 1136/1626] V4L/DVB(13824a): mantis: Fix __devexit bad annotations WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x13d7): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x1433): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x185e): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x18ba): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x68b8): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x6914): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x6d3f): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x6d9b): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14634): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14690): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14abb): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14b17): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. Acked-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/mantis_i2c.c | 2 +- drivers/media/dvb/mantis/mantis_pci.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c index b7df345fe225..7870bcf9689a 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.c +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -253,7 +253,7 @@ int __devinit mantis_i2c_init(struct mantis_pci *mantis) } EXPORT_SYMBOL_GPL(mantis_i2c_init); -int __devexit mantis_i2c_exit(struct mantis_pci *mantis) +int mantis_i2c_exit(struct mantis_pci *mantis) { u32 intmask; diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c index e7cd8aabd887..6c7534af6b44 100644 --- a/drivers/media/dvb/mantis/mantis_pci.c +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -155,7 +155,7 @@ fail0: } EXPORT_SYMBOL_GPL(mantis_pci_init); -void __devexit mantis_pci_exit(struct mantis_pci *mantis) +void mantis_pci_exit(struct mantis_pci *mantis) { struct pci_dev *pdev = mantis->pdev; From fcd89de3bd1c8735f9b7c759dc4848ab6e525bb9 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Sat, 19 Dec 2009 14:11:50 -0300 Subject: [PATCH 1137/1626] V4L/DVB (13851): Fix Input dependency for Mantis > > > > CONFIG_INPUT=n As reported by Randy Dunlap : > ERROR: "ir_input_register" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "ir_input_init" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "input_free_device" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "input_allocate_device" [drivers/media/dvb/mantis/mantis_core.ko] undefined! Signed-off-by: Manu Abraham Acked-by: Randy Dunlap Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/mantis/Kconfig b/drivers/media/dvb/mantis/Kconfig index f9219cd7bb0c..f7b72a32adf3 100644 --- a/drivers/media/dvb/mantis/Kconfig +++ b/drivers/media/dvb/mantis/Kconfig @@ -1,6 +1,6 @@ config MANTIS_CORE tristate "Mantis/Hopper PCI bridge based devices" - depends on PCI && I2C + depends on PCI && I2C && INPUT help Support for PCI cards based on the Mantis and Hopper PCi bridge. From 95b8f20fd6a2694a16b8addb190b942bfb670c88 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 14 Jan 2010 11:43:54 +0000 Subject: [PATCH 1138/1626] ARM: fix badly placed mach/plat entries in Kconfig & Makefile Signed-off-by: Russell King --- arch/arm/Kconfig | 70 +++++++++++++++++++++++------------------------ arch/arm/Makefile | 4 +-- 2 files changed, 37 insertions(+), 37 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c2238cd474c7..4c33ca82f9b1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -729,14 +729,26 @@ config ARCH_U8500 endchoice +source "arch/arm/mach-aaec2000/Kconfig" + +source "arch/arm/mach-at91/Kconfig" + +source "arch/arm/mach-bcmring/Kconfig" + source "arch/arm/mach-clps711x/Kconfig" +source "arch/arm/mach-davinci/Kconfig" + +source "arch/arm/mach-dove/Kconfig" + source "arch/arm/mach-ep93xx/Kconfig" source "arch/arm/mach-footbridge/Kconfig" source "arch/arm/mach-gemini/Kconfig" +source "arch/arm/mach-h720x/Kconfig" + source "arch/arm/mach-integrator/Kconfig" source "arch/arm/mach-iop32x/Kconfig" @@ -751,16 +763,26 @@ source "arch/arm/mach-ixp2000/Kconfig" source "arch/arm/mach-ixp23xx/Kconfig" +source "arch/arm/mach-kirkwood/Kconfig" + +source "arch/arm/mach-ks8695/Kconfig" + +source "arch/arm/mach-lh7a40x/Kconfig" + source "arch/arm/mach-loki/Kconfig" +source "arch/arm/mach-msm/Kconfig" + source "arch/arm/mach-mv78xx0/Kconfig" -source "arch/arm/mach-pxa/Kconfig" -source "arch/arm/plat-pxa/Kconfig" +source "arch/arm/plat-mxc/Kconfig" -source "arch/arm/mach-mmp/Kconfig" +source "arch/arm/mach-netx/Kconfig" -source "arch/arm/mach-sa1100/Kconfig" +source "arch/arm/mach-nomadik/Kconfig" +source "arch/arm/plat-nomadik/Kconfig" + +source "arch/arm/mach-ns9xxx/Kconfig" source "arch/arm/plat-omap/Kconfig" @@ -770,9 +792,14 @@ source "arch/arm/mach-omap2/Kconfig" source "arch/arm/mach-orion5x/Kconfig" -source "arch/arm/mach-kirkwood/Kconfig" +source "arch/arm/mach-pxa/Kconfig" +source "arch/arm/plat-pxa/Kconfig" -source "arch/arm/mach-dove/Kconfig" +source "arch/arm/mach-mmp/Kconfig" + +source "arch/arm/mach-realview/Kconfig" + +source "arch/arm/mach-sa1100/Kconfig" source "arch/arm/plat-samsung/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" @@ -800,41 +827,14 @@ if ARCH_S5PC1XX source "arch/arm/mach-s5pc100/Kconfig" endif -source "arch/arm/mach-lh7a40x/Kconfig" +source "arch/arm/mach-u300/Kconfig" -source "arch/arm/mach-h720x/Kconfig" +source "arch/arm/mach-ux500/Kconfig" source "arch/arm/mach-versatile/Kconfig" -source "arch/arm/mach-aaec2000/Kconfig" - -source "arch/arm/mach-realview/Kconfig" - -source "arch/arm/mach-at91/Kconfig" - -source "arch/arm/plat-mxc/Kconfig" - -source "arch/arm/mach-nomadik/Kconfig" -source "arch/arm/plat-nomadik/Kconfig" - -source "arch/arm/mach-netx/Kconfig" - -source "arch/arm/mach-ns9xxx/Kconfig" - -source "arch/arm/mach-davinci/Kconfig" - -source "arch/arm/mach-ks8695/Kconfig" - -source "arch/arm/mach-msm/Kconfig" - -source "arch/arm/mach-u300/Kconfig" - source "arch/arm/mach-w90x900/Kconfig" -source "arch/arm/mach-bcmring/Kconfig" - -source "arch/arm/mach-ux500/Kconfig" - # Definitions to make life easier config ARCH_ACORN bool diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e9da08483b3c..9e7582572741 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -146,6 +146,7 @@ machine-$(CONFIG_ARCH_MX1) := mx1 machine-$(CONFIG_ARCH_MX2) := mx2 machine-$(CONFIG_ARCH_MX25) := mx25 machine-$(CONFIG_ARCH_MX3) := mx3 +machine-$(CONFIG_ARCH_MXC91231) := mxc91231 machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx @@ -171,12 +172,12 @@ machine-$(CONFIG_ARCH_U8500) := ux500 machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_W90X900) := w90x900 machine-$(CONFIG_FOOTBRIDGE) := footbridge -machine-$(CONFIG_ARCH_MXC91231) := mxc91231 # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. plat-$(CONFIG_ARCH_MXC) := mxc plat-$(CONFIG_ARCH_OMAP) := omap +plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx plat-$(CONFIG_PLAT_IOP) := iop plat-$(CONFIG_PLAT_NOMADIK) := nomadik plat-$(CONFIG_PLAT_ORION) := orion @@ -184,7 +185,6 @@ plat-$(CONFIG_PLAT_PXA) := pxa plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c samsung plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c samsung plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c samsung -plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. From e6622df3bb1a8e1135f4b84928e24d4c6802f6b5 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 7 Jan 2010 08:04:59 -0500 Subject: [PATCH 1139/1626] [SCSI] lpfc: fix file permissions lpfc_hbadisc.c and lpfc_hw4.h accidentally got set executable. Reported-by: Thomas Backlund Cc: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_hbadisc.c | 0 drivers/scsi/lpfc/lpfc_hw4.h | 0 2 files changed, 0 insertions(+), 0 deletions(-) mode change 100755 => 100644 drivers/scsi/lpfc/lpfc_hbadisc.c mode change 100755 => 100644 drivers/scsi/lpfc/lpfc_hw4.h diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c old mode 100755 new mode 100644 diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h old mode 100755 new mode 100644 From cacb6dc3d7fea751879a225c15e48228415e6359 Mon Sep 17 00:00:00 2001 From: "Penchala Narasimha Reddy Chilakala, ERS-HCLTech" Date: Mon, 21 Dec 2009 18:39:27 +0530 Subject: [PATCH 1140/1626] [SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 52 ++++++++++++++++++------ drivers/scsi/aacraid/aacraid.h | 5 ++- drivers/scsi/aacraid/commctrl.c | 28 ++++++------- drivers/scsi/aacraid/comminit.c | 6 ++- drivers/scsi/aacraid/commsup.c | 72 ++++++++++++++++++++++++++++----- drivers/scsi/aacraid/dpcsup.c | 36 ++++++++++++++--- 6 files changed, 154 insertions(+), 45 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 2a889853a106..7e26ebc26661 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -293,7 +293,10 @@ int aac_get_config_status(struct aac_dev *dev, int commit_flag) status = -EINVAL; } } - aac_fib_complete(fibptr); + /* Do not set XferState to zero unless receives a response from F/W */ + if (status >= 0) + aac_fib_complete(fibptr); + /* Send a CT_COMMIT_CONFIG to enable discovery of devices */ if (status >= 0) { if ((aac_commit == 1) || commit_flag) { @@ -310,13 +313,18 @@ int aac_get_config_status(struct aac_dev *dev, int commit_flag) FsaNormal, 1, 1, NULL, NULL); - aac_fib_complete(fibptr); + /* Do not set XferState to zero unless + * receives a response from F/W */ + if (status >= 0) + aac_fib_complete(fibptr); } else if (aac_commit == 0) { printk(KERN_WARNING "aac_get_config_status: Foreign device configurations are being ignored\n"); } } - aac_fib_free(fibptr); + /* FIB should be freed only after getting the response from the F/W */ + if (status != -ERESTARTSYS) + aac_fib_free(fibptr); return status; } @@ -355,7 +363,9 @@ int aac_get_containers(struct aac_dev *dev) maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries); aac_fib_complete(fibptr); } - aac_fib_free(fibptr); + /* FIB should be freed only after getting the response from the F/W */ + if (status != -ERESTARTSYS) + aac_fib_free(fibptr); if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS) maximum_num_containers = MAXIMUM_NUM_CONTAINERS; @@ -1245,8 +1255,12 @@ int aac_get_adapter_info(struct aac_dev* dev) NULL); if (rcode < 0) { - aac_fib_complete(fibptr); - aac_fib_free(fibptr); + /* FIB should be freed only after + * getting the response from the F/W */ + if (rcode != -ERESTARTSYS) { + aac_fib_complete(fibptr); + aac_fib_free(fibptr); + } return rcode; } memcpy(&dev->adapter_info, info, sizeof(*info)); @@ -1270,6 +1284,12 @@ int aac_get_adapter_info(struct aac_dev* dev) if (rcode >= 0) memcpy(&dev->supplement_adapter_info, sinfo, sizeof(*sinfo)); + if (rcode == -ERESTARTSYS) { + fibptr = aac_fib_alloc(dev); + if (!fibptr) + return -ENOMEM; + } + } @@ -1470,9 +1490,11 @@ int aac_get_adapter_info(struct aac_dev* dev) (dev->scsi_host_ptr->sg_tablesize * 8) + 112; } } - - aac_fib_complete(fibptr); - aac_fib_free(fibptr); + /* FIB should be freed only after getting the response from the F/W */ + if (rcode != -ERESTARTSYS) { + aac_fib_complete(fibptr); + aac_fib_free(fibptr); + } return rcode; } @@ -1633,6 +1655,7 @@ static int aac_read(struct scsi_cmnd * scsicmd) * Alocate and initialize a Fib */ if (!(cmd_fibcontext = aac_fib_alloc(dev))) { + printk(KERN_WARNING "aac_read: fib allocation failed\n"); return -1; } @@ -1712,9 +1735,14 @@ static int aac_write(struct scsi_cmnd * scsicmd) * Allocate and initialize a Fib then setup a BlockWrite command */ if (!(cmd_fibcontext = aac_fib_alloc(dev))) { - scsicmd->result = DID_ERROR << 16; - scsicmd->scsi_done(scsicmd); - return 0; + /* FIB temporarily unavailable,not catastrophic failure */ + + /* scsicmd->result = DID_ERROR << 16; + * scsicmd->scsi_done(scsicmd); + * return 0; + */ + printk(KERN_WARNING "aac_write: fib allocation failed\n"); + return -1; } status = aac_adapter_write(cmd_fibcontext, scsicmd, lba, count, fua); diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 83986ed86556..619c02d9c862 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -12,7 +12,7 @@ *----------------------------------------------------------------------------*/ #ifndef AAC_DRIVER_BUILD -# define AAC_DRIVER_BUILD 2461 +# define AAC_DRIVER_BUILD 24702 # define AAC_DRIVER_BRANCH "-ms" #endif #define MAXIMUM_NUM_CONTAINERS 32 @@ -1036,6 +1036,9 @@ struct aac_dev u8 printf_enabled; u8 in_reset; u8 msi; + int management_fib_count; + spinlock_t manage_lock; + }; #define aac_adapter_interrupt(dev) \ diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c index 0391d759dfdb..9c0c91178538 100644 --- a/drivers/scsi/aacraid/commctrl.c +++ b/drivers/scsi/aacraid/commctrl.c @@ -153,7 +153,7 @@ cleanup: fibptr->hw_fib_pa = hw_fib_pa; fibptr->hw_fib_va = hw_fib; } - if (retval != -EINTR) + if (retval != -ERESTARTSYS) aac_fib_free(fibptr); return retval; } @@ -322,7 +322,7 @@ return_fib: } if (f.wait) { if(down_interruptible(&fibctx->wait_sem) < 0) { - status = -EINTR; + status = -ERESTARTSYS; } else { /* Lock again and retry */ spin_lock_irqsave(&dev->fib_lock, flags); @@ -593,10 +593,10 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) u64 addr; void* p; if (upsg->sg[i].count > - (dev->adapter_info.options & + ((dev->adapter_info.options & AAC_OPT_NEW_COMM) ? (dev->scsi_host_ptr->max_sectors << 9) : - 65536) { + 65536)) { rcode = -EINVAL; goto cleanup; } @@ -645,10 +645,10 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) u64 addr; void* p; if (usg->sg[i].count > - (dev->adapter_info.options & + ((dev->adapter_info.options & AAC_OPT_NEW_COMM) ? (dev->scsi_host_ptr->max_sectors << 9) : - 65536) { + 65536)) { rcode = -EINVAL; goto cleanup; } @@ -695,10 +695,10 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) uintptr_t addr; void* p; if (usg->sg[i].count > - (dev->adapter_info.options & + ((dev->adapter_info.options & AAC_OPT_NEW_COMM) ? (dev->scsi_host_ptr->max_sectors << 9) : - 65536) { + 65536)) { rcode = -EINVAL; goto cleanup; } @@ -734,10 +734,10 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) dma_addr_t addr; void* p; if (upsg->sg[i].count > - (dev->adapter_info.options & + ((dev->adapter_info.options & AAC_OPT_NEW_COMM) ? (dev->scsi_host_ptr->max_sectors << 9) : - 65536) { + 65536)) { rcode = -EINVAL; goto cleanup; } @@ -772,8 +772,8 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) psg->count = cpu_to_le32(sg_indx+1); status = aac_fib_send(ScsiPortCommand, srbfib, actual_fibsize, FsaNormal, 1, 1, NULL, NULL); } - if (status == -EINTR) { - rcode = -EINTR; + if (status == -ERESTARTSYS) { + rcode = -ERESTARTSYS; goto cleanup; } @@ -810,7 +810,7 @@ cleanup: for(i=0; i <= sg_indx; i++){ kfree(sg_list[i]); } - if (rcode != -EINTR) { + if (rcode != -ERESTARTSYS) { aac_fib_complete(srbfib); aac_fib_free(srbfib); } @@ -848,7 +848,7 @@ int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg) */ status = aac_dev_ioctl(dev, cmd, arg); - if(status != -ENOTTY) + if (status != -ENOTTY) return status; switch (cmd) { diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index 666d5151d628..a7261486ccd4 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -194,7 +194,9 @@ int aac_send_shutdown(struct aac_dev * dev) if (status >= 0) aac_fib_complete(fibctx); - aac_fib_free(fibctx); + /* FIB should be freed only after getting the response from the F/W */ + if (status != -ERESTARTSYS) + aac_fib_free(fibctx); return status; } @@ -304,6 +306,8 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev) /* * Check the preferred comm settings, defaults from template. */ + dev->management_fib_count = 0; + spin_lock_init(&dev->manage_lock); dev->max_fib_size = sizeof(struct hw_fib); dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size - sizeof(struct aac_fibhdr) diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 956261f25181..94d2954d79ae 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -189,7 +189,14 @@ struct fib *aac_fib_alloc(struct aac_dev *dev) void aac_fib_free(struct fib *fibptr) { - unsigned long flags; + unsigned long flags, flagsv; + + spin_lock_irqsave(&fibptr->event_lock, flagsv); + if (fibptr->done == 2) { + spin_unlock_irqrestore(&fibptr->event_lock, flagsv); + return; + } + spin_unlock_irqrestore(&fibptr->event_lock, flagsv); spin_lock_irqsave(&fibptr->dev->fib_lock, flags); if (unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) @@ -390,6 +397,8 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, struct hw_fib * hw_fib = fibptr->hw_fib_va; unsigned long flags = 0; unsigned long qflags; + unsigned long mflags = 0; + if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned))) return -EBUSY; @@ -471,9 +480,31 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, if (!dev->queues) return -EBUSY; - if(wait) + if (wait) { + + spin_lock_irqsave(&dev->manage_lock, mflags); + if (dev->management_fib_count >= AAC_NUM_MGT_FIB) { + printk(KERN_INFO "No management Fibs Available:%d\n", + dev->management_fib_count); + spin_unlock_irqrestore(&dev->manage_lock, mflags); + return -EBUSY; + } + dev->management_fib_count++; + spin_unlock_irqrestore(&dev->manage_lock, mflags); spin_lock_irqsave(&fibptr->event_lock, flags); - aac_adapter_deliver(fibptr); + } + + if (aac_adapter_deliver(fibptr) != 0) { + printk(KERN_ERR "aac_fib_send: returned -EBUSY\n"); + if (wait) { + spin_unlock_irqrestore(&fibptr->event_lock, flags); + spin_lock_irqsave(&dev->manage_lock, mflags); + dev->management_fib_count--; + spin_unlock_irqrestore(&dev->manage_lock, mflags); + } + return -EBUSY; + } + /* * If the caller wanted us to wait for response wait now. @@ -516,14 +547,15 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, udelay(5); } } else if (down_interruptible(&fibptr->event_wait)) { - fibptr->done = 2; - up(&fibptr->event_wait); + /* Do nothing ... satisfy + * down_interruptible must_check */ } + spin_lock_irqsave(&fibptr->event_lock, flags); - if ((fibptr->done == 0) || (fibptr->done == 2)) { + if (fibptr->done == 0) { fibptr->done = 2; /* Tell interrupt we aborted */ spin_unlock_irqrestore(&fibptr->event_lock, flags); - return -EINTR; + return -ERESTARTSYS; } spin_unlock_irqrestore(&fibptr->event_lock, flags); BUG_ON(fibptr->done == 0); @@ -689,6 +721,7 @@ int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size) int aac_fib_complete(struct fib *fibptr) { + unsigned long flags; struct hw_fib * hw_fib = fibptr->hw_fib_va; /* @@ -709,6 +742,13 @@ int aac_fib_complete(struct fib *fibptr) * command is complete that we had sent to the adapter and this * cdb could be reused. */ + spin_lock_irqsave(&fibptr->event_lock, flags); + if (fibptr->done == 2) { + spin_unlock_irqrestore(&fibptr->event_lock, flags); + return 0; + } + spin_unlock_irqrestore(&fibptr->event_lock, flags); + if((hw_fib->header.XferState & cpu_to_le32(SentFromHost)) && (hw_fib->header.XferState & cpu_to_le32(AdapterProcessed))) { @@ -1355,7 +1395,10 @@ int aac_reset_adapter(struct aac_dev * aac, int forced) if (status >= 0) aac_fib_complete(fibctx); - aac_fib_free(fibctx); + /* FIB should be freed only after getting + * the response from the F/W */ + if (status != -ERESTARTSYS) + aac_fib_free(fibctx); } } @@ -1759,6 +1802,7 @@ int aac_command_thread(void *data) struct fib *fibptr; if ((fibptr = aac_fib_alloc(dev))) { + int status; __le32 *info; aac_fib_init(fibptr); @@ -1769,15 +1813,21 @@ int aac_command_thread(void *data) *info = cpu_to_le32(now.tv_sec); - (void)aac_fib_send(SendHostTime, + status = aac_fib_send(SendHostTime, fibptr, sizeof(*info), FsaNormal, 1, 1, NULL, NULL); - aac_fib_complete(fibptr); - aac_fib_free(fibptr); + /* Do not set XferState to zero unless + * receives a response from F/W */ + if (status >= 0) + aac_fib_complete(fibptr); + /* FIB should be freed only after + * getting the response from the F/W */ + if (status != -ERESTARTSYS) + aac_fib_free(fibptr); } difference = (long)(unsigned)update_interval*HZ; } else { diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c index abc9ef5d1b10..9c7408fe8c7d 100644 --- a/drivers/scsi/aacraid/dpcsup.c +++ b/drivers/scsi/aacraid/dpcsup.c @@ -57,9 +57,9 @@ unsigned int aac_response_normal(struct aac_queue * q) struct hw_fib * hwfib; struct fib * fib; int consumed = 0; - unsigned long flags; + unsigned long flags, mflags; - spin_lock_irqsave(q->lock, flags); + spin_lock_irqsave(q->lock, flags); /* * Keep pulling response QEs off the response queue and waking * up the waiters until there are no more QEs. We then return @@ -125,12 +125,21 @@ unsigned int aac_response_normal(struct aac_queue * q) } else { unsigned long flagv; spin_lock_irqsave(&fib->event_lock, flagv); - if (!fib->done) + if (!fib->done) { fib->done = 1; - up(&fib->event_wait); + up(&fib->event_wait); + } spin_unlock_irqrestore(&fib->event_lock, flagv); + + spin_lock_irqsave(&dev->manage_lock, mflags); + dev->management_fib_count--; + spin_unlock_irqrestore(&dev->manage_lock, mflags); + FIB_COUNTER_INCREMENT(aac_config.NormalRecved); if (fib->done == 2) { + spin_lock_irqsave(&fib->event_lock, flagv); + fib->done = 0; + spin_unlock_irqrestore(&fib->event_lock, flagv); aac_fib_complete(fib); aac_fib_free(fib); } @@ -232,6 +241,7 @@ unsigned int aac_command_normal(struct aac_queue *q) unsigned int aac_intr_normal(struct aac_dev * dev, u32 index) { + unsigned long mflags; dprintk((KERN_INFO "aac_intr_normal(%p,%x)\n", dev, index)); if ((index & 0x00000002L)) { struct hw_fib * hw_fib; @@ -320,11 +330,25 @@ unsigned int aac_intr_normal(struct aac_dev * dev, u32 index) unsigned long flagv; dprintk((KERN_INFO "event_wait up\n")); spin_lock_irqsave(&fib->event_lock, flagv); - if (!fib->done) + if (!fib->done) { fib->done = 1; - up(&fib->event_wait); + up(&fib->event_wait); + } spin_unlock_irqrestore(&fib->event_lock, flagv); + + spin_lock_irqsave(&dev->manage_lock, mflags); + dev->management_fib_count--; + spin_unlock_irqrestore(&dev->manage_lock, mflags); + FIB_COUNTER_INCREMENT(aac_config.NormalRecved); + if (fib->done == 2) { + spin_lock_irqsave(&fib->event_lock, flagv); + fib->done = 0; + spin_unlock_irqrestore(&fib->event_lock, flagv); + aac_fib_complete(fib); + aac_fib_free(fib); + } + } return 0; } From f1053a7ca9ce095d95bcc1cf41684c5e4f3e7751 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Sat, 12 Dec 2009 14:52:21 +0100 Subject: [PATCH 1141/1626] [SCSI] mptsas: Fix issue with chain pools allocation on katmai Since commit 9d2e9d66a3f032667934144cd61c396ba49f090d mptsas driver fails to allocate memory for the MPT chain buffers for second LSI adapter on PPC440SPe Katmai platform: ... ioc1: LSISAS1068E B3: Capabilities={Initiator} mptbase: ioc1: ERROR - Unable to allocate Reply, Request, Chain Buffers! mptbase: ioc1: ERROR - didn't initialize properly! (-3) mptsas: probe of 0002:31:00.0 failed with error -3 This commit increased MPT_FC_CAN_QUEUE value but initChainBuffers() doesn't differentiate between SAS and FC causing increased allocation for SAS case, too. Later pci_alloc_consistent() fails to allocate increased chain buffer pool size for SAS case. Provide a fix by looking at the bus type and using appropriate MPT_SAS_CAN_QUEUE value while calculation of the number of chain buffers. Signed-off-by: Anatolij Gustschin Acked-by: Kashyap Desai Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 85bc6a685e36..44d2037e9e56 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -4330,6 +4330,8 @@ initChainBuffers(MPT_ADAPTER *ioc) if (ioc->bus_type == SPI) num_chain *= MPT_SCSI_CAN_QUEUE; + else if (ioc->bus_type == SAS) + num_chain *= MPT_SAS_CAN_QUEUE; else num_chain *= MPT_FC_CAN_QUEUE; From 63c43b0ec1765b74c734d465ba6345ef4f434df8 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Tue, 15 Dec 2009 17:25:43 +0200 Subject: [PATCH 1142/1626] [SCSI] scsi_lib: Fix bug in completion of bidi commands Because of the terrible structuring of scsi-bidi-commands it breaks some of the life time rules of a scsi-command. It is now not allowed to free up the block-request before cleanup and partial deallocation of the scsi-command. (Which is not so for none bidi commands) The right fix to this problem would be to make bidi command a first citizen by allocating a scsi_sdb pointer at scsi command just like cmd->prot_sdb. The bidi sdb should be allocated/deallocated as part of the get/put_command (Again like the prot_sdb) and the current decoupling of scsi_cmnd and blk-request should be kept. For now make sure scsi_release_buffers() is called before the call to blk_end_request_all() which might cause the suicide of the block requests. At best the leak of bidi buffers, at worse a crash, as there is a race between the existence of the bidi_request and the free of the associated bidi_sdb. The reason this was never hit before is because only OSD has the potential of doing asynchronous bidi commands. (So does bsg but it is never used) And OSD clients just happen to do all their bidi commands synchronously, up until recently. CC: Stable Tree Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index d8927681ec88..c6642423cc67 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -749,9 +749,9 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) */ req->next_rq->resid_len = scsi_in(cmd)->resid; + scsi_release_buffers(cmd); blk_end_request_all(req, 0); - scsi_release_buffers(cmd); scsi_next_command(cmd); return; } From f08b7251c40090b8c522a306642944cd7322eebb Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 12 Jan 2010 12:59:48 -0800 Subject: [PATCH 1143/1626] [SCSI] qla2xxx: Correct FCP2 recovery handling. The driver did not account for non-tape devices needing to employ proper FCP2 recovery. Driver now checks the FCP2-capable flag only, rather than using a midlayer-determined flag (TYPE_TAPE). Signed-off-by: Andrew Vasquez Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 3 +-- drivers/scsi/qla2xxx/qla_init.c | 12 ++++++------ drivers/scsi/qla2xxx/qla_os.c | 12 ++++++------ 3 files changed, 13 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 608e675f68c8..1263d9796e89 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -1586,8 +1586,7 @@ typedef struct fc_port { */ #define FCF_FABRIC_DEVICE BIT_0 #define FCF_LOGIN_NEEDED BIT_1 -#define FCF_TAPE_PRESENT BIT_2 -#define FCF_FCP2_DEVICE BIT_3 +#define FCF_FCP2_DEVICE BIT_2 /* No loop ID flag. */ #define FC_NO_LOOP_ID 0x1000 diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index b4a0eac8f96d..3f8e8495b743 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -205,7 +205,7 @@ qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport, switch (data[0]) { case MBS_COMMAND_COMPLETE: - if (fcport->flags & FCF_TAPE_PRESENT) + if (fcport->flags & FCF_FCP2_DEVICE) opts |= BIT_1; rval = qla2x00_get_port_database(vha, fcport, opts); if (rval != QLA_SUCCESS) @@ -2726,7 +2726,7 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) /* * Logout all previous fabric devices marked lost, except - * tape devices. + * FCP2 devices. */ list_for_each_entry(fcport, &vha->vp_fcports, list) { if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) @@ -2739,7 +2739,7 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) qla2x00_mark_device_lost(vha, fcport, ql2xplogiabsentdevice, 0); if (fcport->loop_id != FC_NO_LOOP_ID && - (fcport->flags & FCF_TAPE_PRESENT) == 0 && + (fcport->flags & FCF_FCP2_DEVICE) == 0 && fcport->port_type != FCT_INITIATOR && fcport->port_type != FCT_BROADCAST) { ha->isp_ops->fabric_logout(vha, @@ -3018,7 +3018,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, fcport->d_id.b24 = new_fcport->d_id.b24; fcport->flags |= FCF_LOGIN_NEEDED; if (fcport->loop_id != FC_NO_LOOP_ID && - (fcport->flags & FCF_TAPE_PRESENT) == 0 && + (fcport->flags & FCF_FCP2_DEVICE) == 0 && fcport->port_type != FCT_INITIATOR && fcport->port_type != FCT_BROADCAST) { ha->isp_ops->fabric_logout(vha, fcport->loop_id, @@ -3272,9 +3272,9 @@ qla2x00_fabric_dev_login(scsi_qla_host_t *vha, fc_port_t *fcport, rval = qla2x00_fabric_login(vha, fcport, next_loopid); if (rval == QLA_SUCCESS) { - /* Send an ADISC to tape devices.*/ + /* Send an ADISC to FCP2 devices.*/ opts = 0; - if (fcport->flags & FCF_TAPE_PRESENT) + if (fcport->flags & FCF_FCP2_DEVICE) opts |= BIT_1; rval = qla2x00_get_port_database(vha, fcport, opts); if (rval != QLA_SUCCESS) { diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 209f50e788a1..8529eb1f3cd4 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1188,7 +1188,6 @@ qla2xxx_slave_configure(struct scsi_device *sdev) scsi_qla_host_t *vha = shost_priv(sdev->host); struct qla_hw_data *ha = vha->hw; struct fc_rport *rport = starget_to_rport(sdev->sdev_target); - fc_port_t *fcport = *(fc_port_t **)rport->dd_data; struct req_que *req = vha->req; if (sdev->tagged_supported) @@ -1197,8 +1196,6 @@ qla2xxx_slave_configure(struct scsi_device *sdev) scsi_deactivate_tcq(sdev, req->max_q_depth); rport->dev_loss_tmo = ha->port_down_retry_count; - if (sdev->type == TYPE_TAPE) - fcport->flags |= FCF_TAPE_PRESENT; return 0; } @@ -2805,7 +2802,7 @@ void qla2x00_relogin(struct scsi_qla_host *vha) fcport->login_retry--; if (fcport->flags & FCF_FABRIC_DEVICE) { - if (fcport->flags & FCF_TAPE_PRESENT) + if (fcport->flags & FCF_FCP2_DEVICE) ha->isp_ops->fabric_logout(vha, fcport->loop_id, fcport->d_id.b.domain, @@ -3141,7 +3138,10 @@ qla2x00_timer(scsi_qla_host_t *vha) if (!IS_QLA2100(ha) && vha->link_down_timeout) atomic_set(&vha->loop_state, LOOP_DEAD); - /* Schedule an ISP abort to return any tape commands. */ + /* + * Schedule an ISP abort to return any FCP2-device + * commands. + */ /* NPIV - scan physical port only */ if (!vha->vp_idx) { spin_lock_irqsave(&ha->hardware_lock, @@ -3158,7 +3158,7 @@ qla2x00_timer(scsi_qla_host_t *vha) if (sp->ctx) continue; sfcp = sp->fcport; - if (!(sfcp->flags & FCF_TAPE_PRESENT)) + if (!(sfcp->flags & FCF_FCP2_DEVICE)) continue; set_bit(ISP_ABORT_NEEDED, From 368bbe077739fa1ef6fc0195b2810ed50ef87df6 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 12 Jan 2010 12:59:49 -0800 Subject: [PATCH 1144/1626] [SCSI] qla2xxx: Perform fast mailbox read of flash regardless of size nor address alignment. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_sup.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 010e69b29afe..371dc895972a 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -2292,11 +2292,14 @@ qla25xx_read_optrom_data(struct scsi_qla_host *vha, uint8_t *buf, uint32_t faddr, left, burst; struct qla_hw_data *ha = vha->hw; + if (IS_QLA25XX(ha) || IS_QLA81XX(ha)) + goto try_fast; if (offset & 0xfff) goto slow_read; if (length < OPTROM_BURST_SIZE) goto slow_read; +try_fast: optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, &optrom_dma, GFP_KERNEL); if (!optrom) { From eda05a28ec52be40086400a1b606d211276f0e41 Mon Sep 17 00:00:00 2001 From: Harish Zunjarrao Date: Tue, 12 Jan 2010 12:59:50 -0800 Subject: [PATCH 1145/1626] [SCSI] fc-transport: Use packed modifier for fc_bsg_request structure. The 32bit kernel does not add padding bytes in the fc_bsg_request structure whereas the 64bit kernel adds padding bytes in the fc_bsg_request structure. Due to this, structure elements gets mismatched with 32bit application and 64bit kernel.To resolve this, used packed modifier to avoid adding padding bytes. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- include/scsi/scsi_bsg_fc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/scsi/scsi_bsg_fc.h b/include/scsi/scsi_bsg_fc.h index a4b233318179..91a4e4ff9a9b 100644 --- a/include/scsi/scsi_bsg_fc.h +++ b/include/scsi/scsi_bsg_fc.h @@ -292,7 +292,7 @@ struct fc_bsg_request { struct fc_bsg_rport_els r_els; struct fc_bsg_rport_ct r_ct; } rqst_data; -}; +} __attribute__((packed)); /* response (request sense data) structure of the sg_io_v4 */ From 22c24734ce5e7cee9a63e02e5aa7ed108f8fad4d Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Tue, 12 Jan 2010 12:59:51 -0800 Subject: [PATCH 1146/1626] [SCSI] qla2xxx: Update version number to 8.03.01-k10. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index a65dd95507c6..ed36279a33c1 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.01-k9" +#define QLA2XXX_VERSION "8.03.01-k10" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 From f09d5454576b9aabd4ce454937cd86263428090b Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Wed, 13 Jan 2010 17:52:36 +0100 Subject: [PATCH 1147/1626] [SCSI] zfcp: Issue zfcp_fc_wka_port_put after FC CT BSG request The patch "zfcp: Simplify handling of ct and els requests" accidentally removed the call to zfcp_fc_wka_port_put for FC CT BSG requests, thus not issuing a "close" request for the WKA ports. Introduce a CT specific handler to first call zfcp_fc_wka_port_put and then continue with the generic handler when returning from FC CT BSG requests. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fc.c | 65 ++++++++++++++++++++++++------------- 1 file changed, 43 insertions(+), 22 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index ac5e3b7a3576..81d4375aa50e 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -677,6 +677,44 @@ static void zfcp_fc_ct_els_job_handler(void *data) job->job_done(job); } +static struct zfcp_fc_wka_port *zfcp_fc_job_wka_port(struct fc_bsg_job *job) +{ + u32 preamble_word1; + u8 gs_type; + struct zfcp_adapter *adapter; + + preamble_word1 = job->request->rqst_data.r_ct.preamble_word1; + gs_type = (preamble_word1 & 0xff000000) >> 24; + + adapter = (struct zfcp_adapter *) job->shost->hostdata[0]; + + switch (gs_type) { + case FC_FST_ALIAS: + return &adapter->gs->as; + case FC_FST_MGMT: + return &adapter->gs->ms; + case FC_FST_TIME: + return &adapter->gs->ts; + break; + case FC_FST_DIR: + return &adapter->gs->ds; + break; + default: + return NULL; + } +} + +static void zfcp_fc_ct_job_handler(void *data) +{ + struct fc_bsg_job *job = data; + struct zfcp_fc_wka_port *wka_port; + + wka_port = zfcp_fc_job_wka_port(job); + zfcp_fc_wka_port_put(wka_port); + + zfcp_fc_ct_els_job_handler(data); +} + static int zfcp_fc_exec_els_job(struct fc_bsg_job *job, struct zfcp_adapter *adapter) { @@ -695,6 +733,7 @@ static int zfcp_fc_exec_els_job(struct fc_bsg_job *job, } else d_id = ntoh24(job->request->rqst_data.h_els.port_id); + els->handler = zfcp_fc_ct_els_job_handler; return zfcp_fsf_send_els(adapter, d_id, els); } @@ -702,35 +741,18 @@ static int zfcp_fc_exec_ct_job(struct fc_bsg_job *job, struct zfcp_adapter *adapter) { int ret; - u8 gs_type; struct zfcp_fsf_ct_els *ct = job->dd_data; struct zfcp_fc_wka_port *wka_port; - u32 preamble_word1; - preamble_word1 = job->request->rqst_data.r_ct.preamble_word1; - gs_type = (preamble_word1 & 0xff000000) >> 24; - - switch (gs_type) { - case FC_FST_ALIAS: - wka_port = &adapter->gs->as; - break; - case FC_FST_MGMT: - wka_port = &adapter->gs->ms; - break; - case FC_FST_TIME: - wka_port = &adapter->gs->ts; - break; - case FC_FST_DIR: - wka_port = &adapter->gs->ds; - break; - default: - return -EINVAL; /* no such service */ - } + wka_port = zfcp_fc_job_wka_port(job); + if (!wka_port) + return -EINVAL; ret = zfcp_fc_wka_port_get(wka_port); if (ret) return ret; + ct->handler = zfcp_fc_ct_job_handler; ret = zfcp_fsf_send_ct(wka_port, ct, NULL); if (ret) zfcp_fc_wka_port_put(wka_port); @@ -752,7 +774,6 @@ int zfcp_fc_exec_bsg_job(struct fc_bsg_job *job) ct_els->req = job->request_payload.sg_list; ct_els->resp = job->reply_payload.sg_list; - ct_els->handler = zfcp_fc_ct_els_job_handler; ct_els->handler_data = job; switch (job->request->msgcode) { From 5a3fb3081a0166cdc5df0d9200234d09ad8d6083 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Wed, 13 Jan 2010 17:52:37 +0100 Subject: [PATCH 1148/1626] [SCSI] zfcp: Fix linebreak in hba trace Advance the correct pointer when inserting the linebreak for the HBA trace. It was missing in the output since the pointer to the output buffer was never advanced, and the linebreak character was overwritten later. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_dbf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c index 84450955ae11..7369c8911bcf 100644 --- a/drivers/s390/scsi/zfcp_dbf.c +++ b/drivers/s390/scsi/zfcp_dbf.c @@ -327,7 +327,7 @@ static void zfcp_dbf_hba_view_response(char **p, break; zfcp_dbf_out(p, "scsi_cmnd", "0x%0Lx", r->u.fcp.cmnd); zfcp_dbf_out(p, "scsi_serial", "0x%016Lx", r->u.fcp.serial); - p += sprintf(*p, "\n"); + *p += sprintf(*p, "\n"); break; case FSF_QTCB_OPEN_PORT_WITH_DID: From 9e2ab1fabdbd88669fdebd368fb5cda32ad5438d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2010 17:52:38 +0100 Subject: [PATCH 1149/1626] [SCSI] zfcp: add missing compat ptr conversion Signed-off-by: Heiko Carstens Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_cfdc.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/s390/scsi/zfcp_cfdc.c b/drivers/s390/scsi/zfcp_cfdc.c index f932400e980a..0eb6eefd2c1a 100644 --- a/drivers/s390/scsi/zfcp_cfdc.c +++ b/drivers/s390/scsi/zfcp_cfdc.c @@ -12,6 +12,7 @@ #include #include +#include #include #include "zfcp_def.h" #include "zfcp_ext.h" @@ -163,7 +164,7 @@ static void zfcp_cfdc_req_to_sense(struct zfcp_cfdc_data *data, } static long zfcp_cfdc_dev_ioctl(struct file *file, unsigned int command, - unsigned long buffer) + unsigned long arg) { struct zfcp_cfdc_data *data; struct zfcp_cfdc_data __user *data_user; @@ -175,7 +176,11 @@ static long zfcp_cfdc_dev_ioctl(struct file *file, unsigned int command, if (command != ZFCP_CFDC_IOC) return -ENOTTY; - data_user = (void __user *) buffer; + if (is_compat_task()) + data_user = compat_ptr(arg); + else + data_user = (void __user *)arg; + if (!data_user) return -EINVAL; From b8f08645f80a0c93246f3539ce53d3cae6a91fa0 Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Thu, 14 Jan 2010 17:19:00 +0100 Subject: [PATCH 1150/1626] [SCSI] scsi_transport_fc: Allow LLD to reset FC BSG timeout The hardware used with zfcp cannot abort a currently pending CT or ELS request. Therefore we need the option to postpone the timeout triggered request abort within the fc layer, since there is nothing zfcp can do to stop the request at this point. Cc: James Smart Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_fc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index ddfcecd5099f..653f22a8deb9 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -3527,7 +3527,10 @@ fc_bsg_job_timeout(struct request *req) if (!done && i->f->bsg_timeout) { /* call LLDD to abort the i/o as it has timed out */ err = i->f->bsg_timeout(job); - if (err) + if (err == -EAGAIN) { + job->ref_cnt--; + return BLK_EH_RESET_TIMER; + } else if (err) printk(KERN_ERR "ERROR: FC BSG request timeout - LLD " "abort failed with status %d\n", err); } From 491ca4426ba153f79e72d1ca2a30c926484282b7 Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Thu, 14 Jan 2010 17:19:01 +0100 Subject: [PATCH 1151/1626] [SCSI] zfcp: Introduce bsg_timeout callback. Introduce a zfcp callback for timeouts triggered from FC BSG. With zfcp, the underlying hardware cannot abort CT or ELS requests, so there is nothing to do when the block layer timeout expires. To avoid interference with the block layer timeout, simply indicate that the block layer timer should be reset. The timer running in the hardware for the pending CT or ELS request will return the request when it expires. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_ext.h | 1 + drivers/s390/scsi/zfcp_fc.c | 6 ++++++ drivers/s390/scsi/zfcp_scsi.c | 1 + 3 files changed, 8 insertions(+) diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 03dec832b465..1406a65a6205 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -108,6 +108,7 @@ extern void zfcp_fc_wka_ports_force_offline(struct zfcp_fc_wka_ports *); extern int zfcp_fc_gs_setup(struct zfcp_adapter *); extern void zfcp_fc_gs_destroy(struct zfcp_adapter *); extern int zfcp_fc_exec_bsg_job(struct fc_bsg_job *); +extern int zfcp_fc_timeout_bsg_job(struct fc_bsg_job *); /* zfcp_fsf.c */ extern int zfcp_fsf_open_port(struct zfcp_erp_action *); diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 81d4375aa50e..37a0ca200a32 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -788,6 +788,12 @@ int zfcp_fc_exec_bsg_job(struct fc_bsg_job *job) } } +int zfcp_fc_timeout_bsg_job(struct fc_bsg_job *job) +{ + /* hardware tracks timeout, reset bsg timeout to not interfere */ + return -EAGAIN; +} + int zfcp_fc_gs_setup(struct zfcp_adapter *adapter) { struct zfcp_fc_wka_ports *wka_ports; diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 771cc536a989..8e6fc68d6bd4 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -652,6 +652,7 @@ struct fc_function_template zfcp_transport_functions = { .show_host_port_state = 1, .show_host_active_fc4s = 1, .bsg_request = zfcp_fc_exec_bsg_job, + .bsg_timeout = zfcp_fc_timeout_bsg_job, /* no functions registered for following dynamic attributes but directly set by LLDD */ .show_host_port_type = 1, From 51375ee8374dd7fa574e1a14ebac406c6d28543b Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Thu, 14 Jan 2010 17:19:02 +0100 Subject: [PATCH 1152/1626] [SCSI] zfcp: Set hardware timeout as requested by BSG request. The hardware used with zfcp provides a timer for CT and ELS requests instead of an abort capability for these commands. To correctly handle the FC BSG timeouts, pass the timeout from the BSG requests to the hardware. Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_ext.h | 4 ++-- drivers/s390/scsi/zfcp_fc.c | 13 ++++++++----- drivers/s390/scsi/zfcp_fc.h | 2 ++ drivers/s390/scsi/zfcp_fsf.c | 19 ++++++++++--------- 4 files changed, 22 insertions(+), 16 deletions(-) diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 1406a65a6205..66bdb34143cb 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -130,9 +130,9 @@ extern void zfcp_fsf_req_dismiss_all(struct zfcp_adapter *); extern int zfcp_fsf_status_read(struct zfcp_qdio *); extern int zfcp_status_read_refill(struct zfcp_adapter *adapter); extern int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *, struct zfcp_fsf_ct_els *, - mempool_t *); + mempool_t *, unsigned int); extern int zfcp_fsf_send_els(struct zfcp_adapter *, u32, - struct zfcp_fsf_ct_els *); + struct zfcp_fsf_ct_els *, unsigned int); extern int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *, struct scsi_cmnd *); extern void zfcp_fsf_req_free(struct zfcp_fsf_req *); diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 37a0ca200a32..0f7b493fb105 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -258,7 +258,8 @@ static int zfcp_fc_ns_gid_pn_request(struct zfcp_port *port, gid_pn->gid_pn_req.gid_pn.fn_wwpn = port->wwpn; ret = zfcp_fsf_send_ct(&adapter->gs->ds, &gid_pn->ct, - adapter->pool.gid_pn_req); + adapter->pool.gid_pn_req, + ZFCP_FC_CTELS_TMO); if (!ret) { wait_for_completion(&completion); zfcp_fc_ns_gid_pn_eval(gid_pn); @@ -421,7 +422,8 @@ static int zfcp_fc_adisc(struct zfcp_port *port) hton24(adisc->adisc_req.adisc_port_id, fc_host_port_id(adapter->scsi_host)); - ret = zfcp_fsf_send_els(adapter, port->d_id, &adisc->els); + ret = zfcp_fsf_send_els(adapter, port->d_id, &adisc->els, + ZFCP_FC_CTELS_TMO); if (ret) kmem_cache_free(zfcp_data.adisc_cache, adisc); @@ -532,7 +534,8 @@ static int zfcp_fc_send_gpn_ft(struct zfcp_fc_gpn_ft *gpn_ft, ct->req = &gpn_ft->sg_req; ct->resp = gpn_ft->sg_resp; - ret = zfcp_fsf_send_ct(&adapter->gs->ds, ct, NULL); + ret = zfcp_fsf_send_ct(&adapter->gs->ds, ct, NULL, + ZFCP_FC_CTELS_TMO); if (!ret) wait_for_completion(&completion); return ret; @@ -734,7 +737,7 @@ static int zfcp_fc_exec_els_job(struct fc_bsg_job *job, d_id = ntoh24(job->request->rqst_data.h_els.port_id); els->handler = zfcp_fc_ct_els_job_handler; - return zfcp_fsf_send_els(adapter, d_id, els); + return zfcp_fsf_send_els(adapter, d_id, els, job->req->timeout / HZ); } static int zfcp_fc_exec_ct_job(struct fc_bsg_job *job, @@ -753,7 +756,7 @@ static int zfcp_fc_exec_ct_job(struct fc_bsg_job *job, return ret; ct->handler = zfcp_fc_ct_job_handler; - ret = zfcp_fsf_send_ct(wka_port, ct, NULL); + ret = zfcp_fsf_send_ct(wka_port, ct, NULL, job->req->timeout / HZ); if (ret) zfcp_fc_wka_port_put(wka_port); diff --git a/drivers/s390/scsi/zfcp_fc.h b/drivers/s390/scsi/zfcp_fc.h index cb2a3669a384..0747b087390d 100644 --- a/drivers/s390/scsi/zfcp_fc.h +++ b/drivers/s390/scsi/zfcp_fc.h @@ -27,6 +27,8 @@ #define ZFCP_FC_GPN_FT_MAX_ENT (ZFCP_FC_GPN_FT_NUM_BUFS * \ (ZFCP_FC_GPN_FT_ENT_PAGE + 1)) +#define ZFCP_FC_CTELS_TMO (2 * FC_DEF_R_A_TOV / 1000) + /** * struct zfcp_fc_gid_pn_req - container for ct header plus gid_pn request * @ct_hdr: FC GS common transport header diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 482dcd97aa5d..e8fb4d9baa8b 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -1068,20 +1068,20 @@ static int zfcp_fsf_setup_ct_els_sbals(struct zfcp_fsf_req *req, static int zfcp_fsf_setup_ct_els(struct zfcp_fsf_req *req, struct scatterlist *sg_req, struct scatterlist *sg_resp, - int max_sbals) + int max_sbals, unsigned int timeout) { int ret; - unsigned int fcp_chan_timeout; ret = zfcp_fsf_setup_ct_els_sbals(req, sg_req, sg_resp, max_sbals); if (ret) return ret; /* common settings for ct/gs and els requests */ - fcp_chan_timeout = 2 * FC_DEF_R_A_TOV / 1000; + if (timeout > 255) + timeout = 255; /* max value accepted by hardware */ req->qtcb->bottom.support.service_class = FSF_CLASS_3; - req->qtcb->bottom.support.timeout = fcp_chan_timeout; - zfcp_fsf_start_timer(req, (fcp_chan_timeout + 10) * HZ); + req->qtcb->bottom.support.timeout = timeout; + zfcp_fsf_start_timer(req, (timeout + 10) * HZ); return 0; } @@ -1092,7 +1092,8 @@ static int zfcp_fsf_setup_ct_els(struct zfcp_fsf_req *req, * @pool: if non-null this mempool is used to allocate struct zfcp_fsf_req */ int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *wka_port, - struct zfcp_fsf_ct_els *ct, mempool_t *pool) + struct zfcp_fsf_ct_els *ct, mempool_t *pool, + unsigned int timeout) { struct zfcp_qdio *qdio = wka_port->adapter->qdio; struct zfcp_fsf_req *req; @@ -1111,7 +1112,7 @@ int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *wka_port, req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; ret = zfcp_fsf_setup_ct_els(req, ct->req, ct->resp, - FSF_MAX_SBALS_PER_REQ); + FSF_MAX_SBALS_PER_REQ, timeout); if (ret) goto failed_send; @@ -1188,7 +1189,7 @@ skip_fsfstatus: * @els: pointer to struct zfcp_send_els with data for the command */ int zfcp_fsf_send_els(struct zfcp_adapter *adapter, u32 d_id, - struct zfcp_fsf_ct_els *els) + struct zfcp_fsf_ct_els *els, unsigned int timeout) { struct zfcp_fsf_req *req; struct zfcp_qdio *qdio = adapter->qdio; @@ -1206,7 +1207,7 @@ int zfcp_fsf_send_els(struct zfcp_adapter *adapter, u32 d_id, } req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; - ret = zfcp_fsf_setup_ct_els(req, els->req, els->resp, 2); + ret = zfcp_fsf_setup_ct_els(req, els->req, els->resp, 2, timeout); if (ret) goto failed_send; From 534ef056db8a8fb6b9d50188d88ed5d1fbc66673 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Fri, 15 Jan 2010 13:07:34 +0100 Subject: [PATCH 1153/1626] [SCSI] aic79xx: check for non-NULL scb in ahd_handle_nonpkt_busfree When removing several devices aic79xx will occasionally Oops in ahd_handle_nonpkt_busfree during rescan. Looking at the code I found that we're indeed not checking if the scb in question is NULL. So check for it before accessing it. Signed-off-by: Hannes Reinecke Signed-off-by: James Bottomley --- drivers/scsi/aic7xxx/aic79xx_core.c | 53 +++++++++++++++++------------ 1 file changed, 31 insertions(+), 22 deletions(-) diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index 4d419c155ce9..78971db5b60e 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -3171,13 +3171,16 @@ ahd_handle_nonpkt_busfree(struct ahd_softc *ahd) tinfo->curr.transport_version = 2; tinfo->goal.transport_version = 2; tinfo->goal.ppr_options = 0; - /* - * Remove any SCBs in the waiting for selection - * queue that may also be for this target so - * that command ordering is preserved. - */ - ahd_freeze_devq(ahd, scb); - ahd_qinfifo_requeue_tail(ahd, scb); + if (scb != NULL) { + /* + * Remove any SCBs in the waiting + * for selection queue that may + * also be for this target so that + * command ordering is preserved. + */ + ahd_freeze_devq(ahd, scb); + ahd_qinfifo_requeue_tail(ahd, scb); + } printerror = 0; } } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE) @@ -3194,13 +3197,16 @@ ahd_handle_nonpkt_busfree(struct ahd_softc *ahd) MSG_EXT_WDTR_BUS_8_BIT, AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); - /* - * Remove any SCBs in the waiting for selection - * queue that may also be for this target so that - * command ordering is preserved. - */ - ahd_freeze_devq(ahd, scb); - ahd_qinfifo_requeue_tail(ahd, scb); + if (scb != NULL) { + /* + * Remove any SCBs in the waiting for + * selection queue that may also be for + * this target so that command ordering + * is preserved. + */ + ahd_freeze_devq(ahd, scb); + ahd_qinfifo_requeue_tail(ahd, scb); + } printerror = 0; } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE) && ppr_busfree == 0) { @@ -3217,13 +3223,16 @@ ahd_handle_nonpkt_busfree(struct ahd_softc *ahd) /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); - /* - * Remove any SCBs in the waiting for selection - * queue that may also be for this target so that - * command ordering is preserved. - */ - ahd_freeze_devq(ahd, scb); - ahd_qinfifo_requeue_tail(ahd, scb); + if (scb != NULL) { + /* + * Remove any SCBs in the waiting for + * selection queue that may also be for + * this target so that command ordering + * is preserved. + */ + ahd_freeze_devq(ahd, scb); + ahd_qinfifo_requeue_tail(ahd, scb); + } printerror = 0; } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0 && ahd_sent_msg(ahd, AHDMSG_1B, @@ -3251,7 +3260,7 @@ ahd_handle_nonpkt_busfree(struct ahd_softc *ahd) * the message phases. We check it last in case we * had to send some other message that caused a busfree. */ - if (printerror != 0 + if (scb != NULL && printerror != 0 && (lastphase == P_MESGIN || lastphase == P_MESGOUT) && ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) { From 3a5dd791abef032fe57fc652c0232913c696e59b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 17 Jan 2010 08:27:34 +1030 Subject: [PATCH 1154/1626] modpost: fix segfault in sym_is() with prefixed arches The sym_is() compares a symbol in an attempt to automatically skip symbol prefixes. It does this first by searching the real symbol with the normal unprefixed symbol. But then it uses the length of the original symbol to check the end of the substring instead of the length of the symbol it is looking for. On non-prefixed arches, this is effectively the same thing, so there is no problem. On prefixed-arches, since this is exceeds by just one byte, a crash is rare and it is usually a NUL byte anyways. But every once in a blue moon, you get the right page alignment and it segfaults. For example, on the Blackfin arch, sym_is() will be called with the real symbol "___mod_usb_device_table" as "symbol" when looking for the normal symbol "__mod_usb_device_table" as "name". The substring will thus return one byte into "symbol" and store it into "match". But then "match" will be indexed with the length of "symbol" instead of "name" and so we will exceed the storage. i.e. the code ends up doing: char foo[] = "abc"; return foo[strlen(foo)+1] == '\0'; Signed-off-by: Mike Frysinger Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- scripts/mod/file2alias.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index 6f426afbc522..220213e603db 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -804,7 +804,7 @@ static inline int sym_is(const char *symbol, const char *name) match = strstr(symbol, name); if (!match) return 0; - return match[strlen(symbol)] == '\0'; + return match[strlen(name)] == '\0'; } static void do_table(void *symval, unsigned long size, From ba59953d281747b1f7518a60f0ba8ff671cd0d65 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 15 Jan 2010 12:08:57 +1000 Subject: [PATCH 1155/1626] drm/nouveau: fix a race condition in nouveau_dma_wait() Can be triggered easily on certain cards (NV46 and NV50 of mine) by running "dmesg", the DRM's channel will lockup. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_dma.c | 76 +++++++++++++++++---------- 1 file changed, 47 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.c b/drivers/gpu/drm/nouveau/nouveau_dma.c index 7afbe8b40d51..50d9e67745af 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dma.c +++ b/drivers/gpu/drm/nouveau/nouveau_dma.c @@ -126,47 +126,52 @@ OUT_RINGp(struct nouveau_channel *chan, const void *data, unsigned nr_dwords) chan->dma.cur += nr_dwords; } -static inline bool -READ_GET(struct nouveau_channel *chan, uint32_t *get) +/* Fetch and adjust GPU GET pointer + * + * Returns: + * value >= 0, the adjusted GET pointer + * -EINVAL if GET pointer currently outside main push buffer + * -EBUSY if timeout exceeded + */ +static inline int +READ_GET(struct nouveau_channel *chan, uint32_t *prev_get, uint32_t *timeout) { uint32_t val; val = nvchan_rd32(chan, chan->user_get); - if (val < chan->pushbuf_base || - val > chan->pushbuf_base + (chan->dma.max << 2)) { - /* meaningless to dma_wait() except to know whether the - * GPU has stalled or not - */ - *get = val; - return false; + + /* reset counter as long as GET is still advancing, this is + * to avoid misdetecting a GPU lockup if the GPU happens to + * just be processing an operation that takes a long time + */ + if (val != *prev_get) { + *prev_get = val; + *timeout = 0; } - *get = (val - chan->pushbuf_base) >> 2; - return true; + if ((++*timeout & 0xff) == 0) { + DRM_UDELAY(1); + if (*timeout > 100000) + return -EBUSY; + } + + if (val < chan->pushbuf_base || + val > chan->pushbuf_base + (chan->dma.max << 2)) + return -EINVAL; + + return (val - chan->pushbuf_base) >> 2; } int nouveau_dma_wait(struct nouveau_channel *chan, int size) { - uint32_t get, prev_get = 0, cnt = 0; - bool get_valid; + uint32_t prev_get = 0, cnt = 0; + int get; while (chan->dma.free < size) { - /* reset counter as long as GET is still advancing, this is - * to avoid misdetecting a GPU lockup if the GPU happens to - * just be processing an operation that takes a long time - */ - get_valid = READ_GET(chan, &get); - if (get != prev_get) { - prev_get = get; - cnt = 0; - } - - if ((++cnt & 0xff) == 0) { - DRM_UDELAY(1); - if (cnt > 100000) - return -EBUSY; - } + get = READ_GET(chan, &prev_get, &cnt); + if (unlikely(get == -EBUSY)) + return -EBUSY; /* loop until we have a usable GET pointer. the value * we read from the GPU may be outside the main ring if @@ -177,7 +182,7 @@ nouveau_dma_wait(struct nouveau_channel *chan, int size) * from the SKIPS area, so the code below doesn't have to deal * with some fun corner cases. */ - if (!get_valid || get < NOUVEAU_DMA_SKIPS) + if (unlikely(get == -EINVAL) || get < NOUVEAU_DMA_SKIPS) continue; if (get <= chan->dma.cur) { @@ -203,6 +208,19 @@ nouveau_dma_wait(struct nouveau_channel *chan, int size) * after processing the currently pending commands. */ OUT_RING(chan, chan->pushbuf_base | 0x20000000); + + /* wait for GET to depart from the skips area. + * prevents writing GET==PUT and causing a race + * condition that causes us to think the GPU is + * idle when it's not. + */ + do { + get = READ_GET(chan, &prev_get, &cnt); + if (unlikely(get == -EBUSY)) + return -EBUSY; + if (unlikely(get == -EINVAL)) + continue; + } while (get <= NOUVEAU_DMA_SKIPS); WRITE_PUT(NOUVEAU_DMA_SKIPS); /* we're now submitting commands at the start of From 0d92971dd6973d865a873c24df2d7bfe06ec4486 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 15 Jan 2010 12:21:37 +1000 Subject: [PATCH 1156/1626] drm/nouveau: fix thinko in nv04_instmem.c Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv04_instmem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv04_instmem.c b/drivers/gpu/drm/nouveau/nv04_instmem.c index a20c206625a2..a3b9563a6f60 100644 --- a/drivers/gpu/drm/nouveau/nv04_instmem.c +++ b/drivers/gpu/drm/nouveau/nv04_instmem.c @@ -30,7 +30,7 @@ nv04_instmem_determine_amount(struct drm_device *dev) * of vram. For now, only reserve a small piece until we know * more about what each chipset requires. */ - switch (dev_priv->chipset & 0xf0) { + switch (dev_priv->chipset) { case 0x40: case 0x47: case 0x49: From d051bbb22e9d8e87e2a5b8efb176d1bfd0f7feee Mon Sep 17 00:00:00 2001 From: Luca Barbieri Date: Sat, 16 Jan 2010 15:27:51 +0100 Subject: [PATCH 1157/1626] drm/nouveau: Acknowledge DMA_VTX_PROTECTION PGRAPH interrupts Currently Nouveau is unable to dismiss DMA_VTX_PROTECTION errors, which results in an infinite loop in the interrupt handler. These errors are caused both by bugs in the Gallium driver and by user-specified index buffers with out of bounds indices. By mmio-tracing the nVidia drivers, I found out how this is done. On DMA_VTX_PROTECTION, The nVidia driver reads the register 0x402000, always getting the value 4, and then writes 4 back to 0x402000. This patch adds that logic by reading 0x402000 and writing the same value back. It's unclear what should happen if the value read is not 4, and the current approach might not be the correct one. To test this, modify mesa/progs/trivial/vbo-drawrange.c, defining ELTOBJ to 1 and replacing indices with huge out of bounds integers. Without this patch, the GPU and/or kernel should lock up. With this patch, it should misrender as expected but not lock up. The errors are still logged since they are useful for development. This has been tested on NV49 and may not work on other cards. To find out how things work on other cards, run the aforementioned test using the blob with mmiotrace and grep for a read of the PGRAPH source register. Signed-off-by: Luca Barbieri Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_irq.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c index 919a619ca7fa..3b9bad66162a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_irq.c +++ b/drivers/gpu/drm/nouveau/nouveau_irq.c @@ -483,6 +483,13 @@ nouveau_pgraph_intr_error(struct drm_device *dev, uint32_t nsource) if (nsource & NV03_PGRAPH_NSOURCE_ILLEGAL_MTHD) { if (nouveau_pgraph_intr_swmthd(dev, &trap)) unhandled = 1; + } else if (nsource & NV03_PGRAPH_NSOURCE_DMA_VTX_PROTECTION) { + uint32_t v = nv_rd32(dev, 0x402000); + nv_wr32(dev, 0x402000, v); + + /* dump the error anyway for now: it's useful for + Gallium development */ + unhandled = 1; } else { unhandled = 1; } From 71666475018a3024fb49499096d26a9350349e8b Mon Sep 17 00:00:00 2001 From: Luca Barbieri Date: Sat, 16 Jan 2010 15:30:15 +0100 Subject: [PATCH 1158/1626] drm/nouveau: Evict buffers in VRAM before freeing sgdma Currently, we take down the sgdma engine without evicting all buffers from VRAM. The TTM device release will try to evict anything in VRAM to GART memory, but this will fail since sgdma has already been taken down. This causes an infinite loop in kernel mode on module unload. It usually doesn't happen because there aren't any buffer on close. However, if the GPU is locked up, this condition is easily triggered. This patch fixes it in the simplest way possible by cleaning VRAM right before cleaning SGDMA memory. Signed-off-by: Luca Barbieri Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_mem.c | 1 - drivers/gpu/drm/nouveau/nouveau_state.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c index 186f34b01f2e..8f3a12f614ed 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mem.c +++ b/drivers/gpu/drm/nouveau/nouveau_mem.c @@ -386,7 +386,6 @@ void nouveau_mem_close(struct drm_device *dev) nouveau_bo_unpin(dev_priv->vga_ram); nouveau_bo_ref(NULL, &dev_priv->vga_ram); - ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM); ttm_bo_device_release(&dev_priv->ttm.bdev); nouveau_ttm_global_release(dev_priv); diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 09b9a46dfc0e..f2d0187ba152 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -525,6 +525,7 @@ static void nouveau_card_takedown(struct drm_device *dev) engine->mc.takedown(dev); mutex_lock(&dev->struct_mutex); + ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM); ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_TT); mutex_unlock(&dev->struct_mutex); nouveau_sgdma_takedown(dev); From 134f248bea4bf5c3169b4950eb49c6651b09eb0e Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 18 Jan 2010 08:33:04 +1000 Subject: [PATCH 1159/1626] drm/nv50: fix alignment of per-channel fifo cache GPU pointer to the structure is shifted right by 10 bits, so we need to align to 1024 bytes, not 256. Reported-by: Maarten Maathuis Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_fifo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv50_fifo.c b/drivers/gpu/drm/nouveau/nv50_fifo.c index 39caf167587d..32b244bcb482 100644 --- a/drivers/gpu/drm/nouveau/nv50_fifo.c +++ b/drivers/gpu/drm/nouveau/nv50_fifo.c @@ -272,7 +272,7 @@ nv50_fifo_create_context(struct nouveau_channel *chan) return ret; ramfc = chan->ramfc->gpuobj; - ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, 4096, 256, + ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, 4096, 1024, 0, &chan->cache); if (ret) return ret; From 58d65b84dee524b0a4a8b747b8eb8bbf2fb16d9d Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 18 Jan 2010 08:52:35 +1000 Subject: [PATCH 1160/1626] drm/nv50: prevent accidently turning off encoders we're actually using On most cards the DisplayPort connector is created with 2 encoders sharing a single SOR (for native DP, and for DVI-over-DP). The previous logic for turning off unused encoders didn't take into account that we could have multiple drm_encoders on a single hw encoder and ended up turning off encoders that were actually being used still. This patch fixes that issue. We probably want to look at something a bit better later on, and only expose one drm_encoder per hw encoder block. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_crtc.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv50_crtc.c b/drivers/gpu/drm/nouveau/nv50_crtc.c index 118d3285fd8c..40b7360841f8 100644 --- a/drivers/gpu/drm/nouveau/nv50_crtc.c +++ b/drivers/gpu/drm/nouveau/nv50_crtc.c @@ -432,6 +432,7 @@ nv50_crtc_prepare(struct drm_crtc *crtc) struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); struct drm_device *dev = crtc->dev; struct drm_encoder *encoder; + uint32_t dac = 0, sor = 0; NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); @@ -439,9 +440,28 @@ nv50_crtc_prepare(struct drm_crtc *crtc) list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); - if (drm_helper_encoder_in_use(encoder)) + if (!drm_helper_encoder_in_use(encoder)) continue; + if (nv_encoder->dcb->type == OUTPUT_ANALOG || + nv_encoder->dcb->type == OUTPUT_TV) + dac |= (1 << nv_encoder->or); + else + sor |= (1 << nv_encoder->or); + } + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); + + if (nv_encoder->dcb->type == OUTPUT_ANALOG || + nv_encoder->dcb->type == OUTPUT_TV) { + if (dac & (1 << nv_encoder->or)) + continue; + } else { + if (sor & (1 << nv_encoder->or)) + continue; + } + nv_encoder->disconnect(nv_encoder); } From 406266ab9ac8ed8b085c58aacd9e3161480dc5d5 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Wed, 9 Dec 2009 22:00:38 +0000 Subject: [PATCH 1161/1626] btrfs: fix missing last-entry in readdir(3) parent 49313cdac7b34c9f7ecbb1780cfc648b1c082cd7 (v2.6.32-1-g49313cd) commit ff48c08e1c05c67e8348ab6f8a24de8034e0e34d Author: Jan Engelhardt Date: Wed Dec 9 22:57:36 2009 +0100 Btrfs: fix missing last-entry in readdir(3) When one does a 32-bit readdir(3), the last entry of a directory is missing. This is however not due to passing a large value to filldir, but it seems to have to do with glibc doing telldir or something quirky. In any case, this patch fixes it in practice. Signed-off-by: Jan Engelhardt Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 5440bab23635..d5aa97310943 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3995,7 +3995,11 @@ skip: /* Reached end of directory/root. Bump pos past the last item. */ if (key_type == BTRFS_DIR_INDEX_KEY) - filp->f_pos = INT_LIMIT(off_t); + /* + * 32-bit glibc will use getdents64, but then strtol - + * so the last number we can serve is this. + */ + filp->f_pos = 0x7fffffff; else filp->f_pos++; nopos: From a038fab0cb873c75d6675e2bcffce8a3935bdce7 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Mon, 28 Dec 2009 05:01:58 +0000 Subject: [PATCH 1162/1626] Btrfs: align offsets for btrfs_ordered_update_i_size Some callers of btrfs_ordered_update_i_size can now pass in a NULL for the ordered extent to update against. This makes sure we properly align the offset they pass in when deciding how much to bump the on disk i_size. Signed-off-by: Chris Mason --- fs/btrfs/ordered-data.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c index b10a49d4bc6a..5c2a9e78a949 100644 --- a/fs/btrfs/ordered-data.c +++ b/fs/btrfs/ordered-data.c @@ -626,6 +626,8 @@ int btrfs_ordered_update_i_size(struct inode *inode, u64 offset, if (ordered) offset = entry_end(ordered); + else + offset = ALIGN(offset, BTRFS_I(inode)->root->sectorsize); mutex_lock(&tree->mutex); disk_i_size = BTRFS_I(inode)->disk_i_size; From 2423fdfb96e3f9ff3baeb6c4c78d74145547891d Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 6 Jan 2010 16:57:22 +0000 Subject: [PATCH 1163/1626] Btrfs, fix memory leaks in error paths Stanse found 2 memory leaks in relocate_block_group and __btrfs_map_block. cluster and multi are not freed/assigned on all paths. Fix that. Signed-off-by: Jiri Slaby Cc: linux-btrfs@vger.kernel.org Signed-off-by: Chris Mason --- fs/btrfs/relocation.c | 4 +++- fs/btrfs/volumes.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index a9728680eca8..ed3e4a2ec2c8 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -3281,8 +3281,10 @@ static noinline_for_stack int relocate_block_group(struct reloc_control *rc) return -ENOMEM; path = btrfs_alloc_path(); - if (!path) + if (!path) { + kfree(cluster); return -ENOMEM; + } rc->extents_found = 0; rc->extents_skipped = 0; diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 198cff28766d..220dad5db017 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2649,8 +2649,10 @@ again: em = lookup_extent_mapping(em_tree, logical, *length); read_unlock(&em_tree->lock); - if (!em && unplug_page) + if (!em && unplug_page) { + kfree(multi); return 0; + } if (!em) { printk(KERN_CRIT "unable to find logical %llu len %llu\n", From 6c7d54ac87f338c479d9729e8392eca3f76e11e1 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Fri, 15 Jan 2010 08:43:09 +0000 Subject: [PATCH 1164/1626] Btrfs: Fix race in btrfs_mark_extent_written Fix bug reported by Johannes Hirte. The reason of that bug is btrfs_del_items is called after btrfs_duplicate_item and btrfs_del_items triggers tree balance. The fix is check that case and call btrfs_search_slot when needed. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/file.c | 100 ++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 80 insertions(+), 20 deletions(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 3bfe9f03990b..ae96fdae1f7d 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -506,7 +506,8 @@ next_slot: } static int extent_mergeable(struct extent_buffer *leaf, int slot, - u64 objectid, u64 bytenr, u64 *start, u64 *end) + u64 objectid, u64 bytenr, u64 orig_offset, + u64 *start, u64 *end) { struct btrfs_file_extent_item *fi; struct btrfs_key key; @@ -522,6 +523,7 @@ static int extent_mergeable(struct extent_buffer *leaf, int slot, fi = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item); if (btrfs_file_extent_type(leaf, fi) != BTRFS_FILE_EXTENT_REG || btrfs_file_extent_disk_bytenr(leaf, fi) != bytenr || + btrfs_file_extent_offset(leaf, fi) != key.offset - orig_offset || btrfs_file_extent_compression(leaf, fi) || btrfs_file_extent_encryption(leaf, fi) || btrfs_file_extent_other_encoding(leaf, fi)) @@ -561,6 +563,7 @@ int btrfs_mark_extent_written(struct btrfs_trans_handle *trans, u64 split; int del_nr = 0; int del_slot = 0; + int recow; int ret; btrfs_drop_extent_cache(inode, start, end - 1, 0); @@ -568,6 +571,7 @@ int btrfs_mark_extent_written(struct btrfs_trans_handle *trans, path = btrfs_alloc_path(); BUG_ON(!path); again: + recow = 0; split = start; key.objectid = inode->i_ino; key.type = BTRFS_EXTENT_DATA_KEY; @@ -591,12 +595,60 @@ again: bytenr = btrfs_file_extent_disk_bytenr(leaf, fi); num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi); orig_offset = key.offset - btrfs_file_extent_offset(leaf, fi); + memcpy(&new_key, &key, sizeof(new_key)); + + if (start == key.offset && end < extent_end) { + other_start = 0; + other_end = start; + if (extent_mergeable(leaf, path->slots[0] - 1, + inode->i_ino, bytenr, orig_offset, + &other_start, &other_end)) { + new_key.offset = end; + btrfs_set_item_key_safe(trans, root, path, &new_key); + fi = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_file_extent_item); + btrfs_set_file_extent_num_bytes(leaf, fi, + extent_end - end); + btrfs_set_file_extent_offset(leaf, fi, + end - orig_offset); + fi = btrfs_item_ptr(leaf, path->slots[0] - 1, + struct btrfs_file_extent_item); + btrfs_set_file_extent_num_bytes(leaf, fi, + end - other_start); + btrfs_mark_buffer_dirty(leaf); + goto out; + } + } + + if (start > key.offset && end == extent_end) { + other_start = end; + other_end = 0; + if (extent_mergeable(leaf, path->slots[0] + 1, + inode->i_ino, bytenr, orig_offset, + &other_start, &other_end)) { + fi = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_file_extent_item); + btrfs_set_file_extent_num_bytes(leaf, fi, + start - key.offset); + path->slots[0]++; + new_key.offset = start; + btrfs_set_item_key_safe(trans, root, path, &new_key); + + fi = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_file_extent_item); + btrfs_set_file_extent_num_bytes(leaf, fi, + other_end - start); + btrfs_set_file_extent_offset(leaf, fi, + start - orig_offset); + btrfs_mark_buffer_dirty(leaf); + goto out; + } + } while (start > key.offset || end < extent_end) { if (key.offset == start) split = end; - memcpy(&new_key, &key, sizeof(new_key)); new_key.offset = split; ret = btrfs_duplicate_item(trans, root, path, &new_key); if (ret == -EAGAIN) { @@ -631,15 +683,18 @@ again: path->slots[0]--; extent_end = end; } + recow = 1; } - fi = btrfs_item_ptr(leaf, path->slots[0], - struct btrfs_file_extent_item); - other_start = end; other_end = 0; - if (extent_mergeable(leaf, path->slots[0] + 1, inode->i_ino, - bytenr, &other_start, &other_end)) { + if (extent_mergeable(leaf, path->slots[0] + 1, + inode->i_ino, bytenr, orig_offset, + &other_start, &other_end)) { + if (recow) { + btrfs_release_path(root, path); + goto again; + } extent_end = other_end; del_slot = path->slots[0] + 1; del_nr++; @@ -650,8 +705,13 @@ again: } other_start = 0; other_end = start; - if (extent_mergeable(leaf, path->slots[0] - 1, inode->i_ino, - bytenr, &other_start, &other_end)) { + if (extent_mergeable(leaf, path->slots[0] - 1, + inode->i_ino, bytenr, orig_offset, + &other_start, &other_end)) { + if (recow) { + btrfs_release_path(root, path); + goto again; + } key.offset = other_start; del_slot = path->slots[0]; del_nr++; @@ -660,22 +720,22 @@ again: inode->i_ino, orig_offset); BUG_ON(ret); } + fi = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_file_extent_item); if (del_nr == 0) { btrfs_set_file_extent_type(leaf, fi, BTRFS_FILE_EXTENT_REG); btrfs_mark_buffer_dirty(leaf); - goto out; + } else { + btrfs_set_file_extent_type(leaf, fi, + BTRFS_FILE_EXTENT_REG); + btrfs_set_file_extent_num_bytes(leaf, fi, + extent_end - key.offset); + btrfs_mark_buffer_dirty(leaf); + + ret = btrfs_del_items(trans, root, path, del_slot, del_nr); + BUG_ON(ret); } - - fi = btrfs_item_ptr(leaf, del_slot - 1, - struct btrfs_file_extent_item); - btrfs_set_file_extent_type(leaf, fi, BTRFS_FILE_EXTENT_REG); - btrfs_set_file_extent_num_bytes(leaf, fi, - extent_end - key.offset); - btrfs_mark_buffer_dirty(leaf); - - ret = btrfs_del_items(trans, root, path, del_slot, del_nr); - BUG_ON(ret); out: btrfs_free_path(path); return 0; From 6c090a11e1c403b727a6a8eff0b97d5fb9e95cb5 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 15 Jan 2010 20:08:22 +0000 Subject: [PATCH 1165/1626] Btrfs: fix regression in orphan cleanup Currently orphan cleanup only ever gets triggered if we cross subvolumes during a lookup, which means that if we just mount a plain jane fs that has orphans in it, they will never get cleaned up. This results in panic's like these http://www.kerneloops.org/oops.php?number=1109085 where adding an orphan entry results in -EEXIST being returned and we panic. In order to fix this, we check to see on lookup if our root has had the orphan cleanup done, and if not go ahead and do it. This is easily reproduceable by running this testcase #include #include #include #include #include #include int main(int argc, char **argv) { char data[4096]; char newdata[4096]; int fd1, fd2; memset(data, 'a', 4096); memset(newdata, 'b', 4096); while (1) { int i; fd1 = creat("file1", 0666); if (fd1 < 0) break; for (i = 0; i < 512; i++) write(fd1, data, 4096); fsync(fd1); close(fd1); fd2 = creat("file2", 0666); if (fd2 < 0) break; ftruncate(fd2, 4096 * 512); for (i = 0; i < 512; i++) write(fd2, newdata, 4096); close(fd2); i = rename("file2", "file1"); unlink("file1"); } return 0; } and then pulling the power on the box, and then trying to run that test again when the box comes back up. I've tested this locally and it fixes the problem. Thanks to Tomas Carnecky for helping me track this down initially. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index d5aa97310943..b330e27c2d8b 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3796,6 +3796,12 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry) if (location.type == BTRFS_INODE_ITEM_KEY) { inode = btrfs_iget(dir->i_sb, &location, root); + if (unlikely(root->clean_orphans) && + !(inode->i_sb->s_flags & MS_RDONLY)) { + down_read(&root->fs_info->cleanup_work_sem); + btrfs_orphan_cleanup(root); + up_read(&root->fs_info->cleanup_work_sem); + } return inode; } From a9cc71a60c29a09174bee2fcef8f924c529fd4b7 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Sun, 17 Jan 2010 20:36:18 -0500 Subject: [PATCH 1166/1626] Btrfs: deal with NULL acl sent to btrfs_set_acl It is legal for btrfs_set_acl to be sent a NULL acl. This makes sure we don't dereference it. A similar patch was sent by Johannes Hirte Signed-off-by: Chris Mason --- fs/btrfs/acl.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c index 1898f8555f06..fa44e92e9b8f 100644 --- a/fs/btrfs/acl.c +++ b/fs/btrfs/acl.c @@ -112,12 +112,14 @@ static int btrfs_set_acl(struct btrfs_trans_handle *trans, switch (type) { case ACL_TYPE_ACCESS: mode = inode->i_mode; - ret = posix_acl_equiv_mode(acl, &mode); - if (ret < 0) - return ret; - ret = 0; - inode->i_mode = mode; name = POSIX_ACL_XATTR_ACCESS; + if (acl) { + ret = posix_acl_equiv_mode(acl, &mode); + if (ret < 0) + return ret; + inode->i_mode = mode; + } + ret = 0; break; case ACL_TYPE_DEFAULT: if (!S_ISDIR(inode->i_mode)) From 11dfe35a0108097f2df1f042c485fa7f758c2cdf Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 13 Nov 2009 20:12:59 +0000 Subject: [PATCH 1167/1626] Btrfs: fix possible panic on unmount We can race with the unmount of an fs and the stopping of a kthread where we will free the block group before we're done using it. The reason for this is because we do not hold a reference on the block group while its caching, since the allocator drops its reference once it exits or moves on to the next block group. This patch fixes the problem by taking a reference to the block group before we start caching and dropping it when we're done to make sure all accesses to the block group are safe. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 56e50137d0e6..432a2da4641e 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -83,6 +83,17 @@ static int block_group_bits(struct btrfs_block_group_cache *cache, u64 bits) return (cache->flags & bits) == bits; } +void btrfs_get_block_group(struct btrfs_block_group_cache *cache) +{ + atomic_inc(&cache->count); +} + +void btrfs_put_block_group(struct btrfs_block_group_cache *cache) +{ + if (atomic_dec_and_test(&cache->count)) + kfree(cache); +} + /* * this adds the block group to the fs_info rb tree for the block group * cache @@ -156,7 +167,7 @@ block_group_cache_tree_search(struct btrfs_fs_info *info, u64 bytenr, } } if (ret) - atomic_inc(&ret->count); + btrfs_get_block_group(ret); spin_unlock(&info->block_group_cache_lock); return ret; @@ -407,6 +418,8 @@ err: put_caching_control(caching_ctl); atomic_dec(&block_group->space_info->caching_threads); + btrfs_put_block_group(block_group); + return 0; } @@ -447,6 +460,7 @@ static int cache_block_group(struct btrfs_block_group_cache *cache) up_write(&fs_info->extent_commit_sem); atomic_inc(&cache->space_info->caching_threads); + btrfs_get_block_group(cache); tsk = kthread_run(caching_kthread, cache, "btrfs-cache-%llu\n", cache->key.objectid); @@ -486,12 +500,6 @@ struct btrfs_block_group_cache *btrfs_lookup_block_group( return cache; } -void btrfs_put_block_group(struct btrfs_block_group_cache *cache) -{ - if (atomic_dec_and_test(&cache->count)) - kfree(cache); -} - static struct btrfs_space_info *__find_space_info(struct btrfs_fs_info *info, u64 flags) { @@ -2582,7 +2590,7 @@ next_block_group(struct btrfs_root *root, if (node) { cache = rb_entry(node, struct btrfs_block_group_cache, cache_node); - atomic_inc(&cache->count); + btrfs_get_block_group(cache); } else cache = NULL; spin_unlock(&root->fs_info->block_group_cache_lock); @@ -4227,7 +4235,7 @@ search: u64 offset; int cached; - atomic_inc(&block_group->count); + btrfs_get_block_group(block_group); search_start = block_group->key.objectid; have_block_group: @@ -4315,7 +4323,7 @@ have_block_group: btrfs_put_block_group(block_group); block_group = last_ptr->block_group; - atomic_inc(&block_group->count); + btrfs_get_block_group(block_group); spin_unlock(&last_ptr->lock); spin_unlock(&last_ptr->refill_lock); @@ -7395,9 +7403,7 @@ int btrfs_free_block_groups(struct btrfs_fs_info *info) wait_block_group_cache_done(block_group); btrfs_remove_free_space_cache(block_group); - - WARN_ON(atomic_read(&block_group->count) != 1); - kfree(block_group); + btrfs_put_block_group(block_group); spin_lock(&info->block_group_cache_lock); } From 0a931acfd19faf13129a22a46c06f330ecc2a4a3 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sun, 17 Jan 2010 03:32:50 +0000 Subject: [PATCH 1168/1626] ipv4: don't remove /proc/net/rt_acct /proc/net/rt_acct is not created if NET_CLS_ROUTE=n. Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- net/ipv4/route.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index e446496f564f..d62b05d33384 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -586,7 +586,9 @@ static void __net_exit ip_rt_do_proc_exit(struct net *net) { remove_proc_entry("rt_cache", net->proc_net_stat); remove_proc_entry("rt_cache", net->proc_net); +#ifdef CONFIG_NET_CLS_ROUTE remove_proc_entry("rt_acct", net->proc_net); +#endif } static struct pernet_operations ip_rt_proc_ops __net_initdata = { From 9dffe2a32b0deef52605d50527c0d240b15cabf7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 4 Jan 2010 18:05:00 +0000 Subject: [PATCH 1169/1626] mfd: Correct WM835x ISINK ramp time defines The constants used to specify ISINK ramp times for WM835x had the wrong shifts so that the on times applied to the off ramp and vice versa. The masks for the bitfields are correct. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm8350/pmic.h | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/include/linux/mfd/wm8350/pmic.h b/include/linux/mfd/wm8350/pmic.h index be3264e286e0..e786fe9841ef 100644 --- a/include/linux/mfd/wm8350/pmic.h +++ b/include/linux/mfd/wm8350/pmic.h @@ -666,20 +666,20 @@ #define WM8350_ISINK_FLASH_DUR_64MS (1 << 8) #define WM8350_ISINK_FLASH_DUR_96MS (2 << 8) #define WM8350_ISINK_FLASH_DUR_1024MS (3 << 8) -#define WM8350_ISINK_FLASH_ON_INSTANT (0 << 4) -#define WM8350_ISINK_FLASH_ON_0_25S (1 << 4) -#define WM8350_ISINK_FLASH_ON_0_50S (2 << 4) -#define WM8350_ISINK_FLASH_ON_1_00S (3 << 4) -#define WM8350_ISINK_FLASH_ON_1_95S (1 << 4) -#define WM8350_ISINK_FLASH_ON_3_91S (2 << 4) -#define WM8350_ISINK_FLASH_ON_7_80S (3 << 4) -#define WM8350_ISINK_FLASH_OFF_INSTANT (0 << 0) -#define WM8350_ISINK_FLASH_OFF_0_25S (1 << 0) -#define WM8350_ISINK_FLASH_OFF_0_50S (2 << 0) -#define WM8350_ISINK_FLASH_OFF_1_00S (3 << 0) -#define WM8350_ISINK_FLASH_OFF_1_95S (1 << 0) -#define WM8350_ISINK_FLASH_OFF_3_91S (2 << 0) -#define WM8350_ISINK_FLASH_OFF_7_80S (3 << 0) +#define WM8350_ISINK_FLASH_ON_INSTANT (0 << 0) +#define WM8350_ISINK_FLASH_ON_0_25S (1 << 0) +#define WM8350_ISINK_FLASH_ON_0_50S (2 << 0) +#define WM8350_ISINK_FLASH_ON_1_00S (3 << 0) +#define WM8350_ISINK_FLASH_ON_1_95S (1 << 0) +#define WM8350_ISINK_FLASH_ON_3_91S (2 << 0) +#define WM8350_ISINK_FLASH_ON_7_80S (3 << 0) +#define WM8350_ISINK_FLASH_OFF_INSTANT (0 << 4) +#define WM8350_ISINK_FLASH_OFF_0_25S (1 << 4) +#define WM8350_ISINK_FLASH_OFF_0_50S (2 << 4) +#define WM8350_ISINK_FLASH_OFF_1_00S (3 << 4) +#define WM8350_ISINK_FLASH_OFF_1_95S (1 << 4) +#define WM8350_ISINK_FLASH_OFF_3_91S (2 << 4) +#define WM8350_ISINK_FLASH_OFF_7_80S (3 << 4) /* * Regulator Interrupts. From 6f2af72a2451b7491fba820b1d1b0b91c6a84027 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 5 Jan 2010 13:59:06 +0000 Subject: [PATCH 1170/1626] mfd: WM8350 off by one bug If irq == WM8350_NUM_IRQ that would put us past the end of the array. Signed-off-by: Dan Carpenter Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c index c8df547c4747..9025f29e2707 100644 --- a/drivers/mfd/wm8350-irq.c +++ b/drivers/mfd/wm8350-irq.c @@ -434,7 +434,7 @@ int wm8350_register_irq(struct wm8350 *wm8350, int irq, irq_handler_t handler, unsigned long flags, const char *name, void *data) { - if (irq < 0 || irq > WM8350_NUM_IRQ || !handler) + if (irq < 0 || irq >= WM8350_NUM_IRQ || !handler) return -EINVAL; if (wm8350->irq[irq].handler) @@ -453,7 +453,7 @@ EXPORT_SYMBOL_GPL(wm8350_register_irq); int wm8350_free_irq(struct wm8350 *wm8350, int irq) { - if (irq < 0 || irq > WM8350_NUM_IRQ) + if (irq < 0 || irq >= WM8350_NUM_IRQ) return -EINVAL; wm8350_mask_irq(wm8350, irq); From 64e8867ba8098b69889c1af94997a5ba2348fb26 Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Wed, 6 Jan 2010 13:51:48 +0100 Subject: [PATCH 1171/1626] mfd: tmio_mmc hardware abstraction for CNF area This patch abstracts out the CNF area code from tmio_mmc which is not present in all hardware that can use this driver. This is required so that we can support non-toshiba based hardware. ASIC3 support by Philipp Zabel Signed-off-by: Ian Molton Signed-off-by: Magnus Damm Signed-off-by: Samuel Ortiz --- drivers/mfd/Makefile | 6 +- drivers/mfd/asic3.c | 40 +++++++++--- drivers/mfd/t7l66xb.c | 55 ++++++++++------ drivers/mfd/tc6387xb.c | 121 ++++++++++++++++++++++++++---------- drivers/mfd/tc6393xb.c | 56 ++++++++++++++--- drivers/mfd/tmio_core.c | 52 ++++++++++++++++ drivers/mmc/host/tmio_mmc.c | 59 ++++++------------ drivers/mmc/host/tmio_mmc.h | 46 ++------------ include/linux/mfd/tmio.h | 39 ++++++++++++ 9 files changed, 324 insertions(+), 150 deletions(-) create mode 100644 drivers/mfd/tmio_core.c diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index ca2f2c4ff05e..8f0d18409ede 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -11,9 +11,9 @@ obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o -obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o -obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o -obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o +obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o +obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o +obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o tmio_core.o obj-$(CONFIG_MFD_WM8400) += wm8400-core.o wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index e22128c3e9a8..95c1e6bd1729 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -80,6 +80,7 @@ struct asic3 { u16 irq_bothedge[4]; struct gpio_chip gpio; struct device *dev; + void __iomem *tmio_cnf; struct asic3_clk clocks[ARRAY_SIZE(asic3_clk_init)]; }; @@ -685,8 +686,24 @@ static struct mfd_cell asic3_cell_ds1wm = { .resources = ds1wm_resources, }; +static void asic3_mmc_pwr(struct platform_device *pdev, int state) +{ + struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); + + tmio_core_mmc_pwr(asic->tmio_cnf, 1 - asic->bus_shift, state); +} + +static void asic3_mmc_clk_div(struct platform_device *pdev, int state) +{ + struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); + + tmio_core_mmc_clk_div(asic->tmio_cnf, 1 - asic->bus_shift, state); +} + static struct tmio_mmc_data asic3_mmc_data = { - .hclk = 24576000, + .hclk = 24576000, + .set_pwr = asic3_mmc_pwr, + .set_clk_div = asic3_mmc_clk_div, }; static struct resource asic3_mmc_resources[] = { @@ -695,11 +712,6 @@ static struct resource asic3_mmc_resources[] = { .end = ASIC3_SD_CTRL_BASE + 0x3ff, .flags = IORESOURCE_MEM, }, - { - .start = ASIC3_SD_CONFIG_BASE, - .end = ASIC3_SD_CONFIG_BASE + 0x1ff, - .flags = IORESOURCE_MEM, - }, { .start = 0, .end = 0, @@ -743,6 +755,10 @@ static int asic3_mmc_enable(struct platform_device *pdev) asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF), ASIC3_SDHWCTRL_SDPWR, 1); + /* ASIC3_SD_CTRL_BASE assumes 32-bit addressing, TMIO is 16-bit */ + tmio_core_mmc_enable(asic->tmio_cnf, 1 - asic->bus_shift, + ASIC3_SD_CTRL_BASE >> 1); + return 0; } @@ -797,10 +813,15 @@ static int __init asic3_mfd_probe(struct platform_device *pdev, asic3_cell_ds1wm.data_size = sizeof(asic3_cell_ds1wm); /* MMC */ + asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) + + mem_sdio->start, 0x400 >> asic->bus_shift); + if (!asic->tmio_cnf) { + ret = -ENOMEM; + dev_dbg(asic->dev, "Couldn't ioremap SD_CONFIG\n"); + goto out; + } asic3_mmc_resources[0].start >>= asic->bus_shift; asic3_mmc_resources[0].end >>= asic->bus_shift; - asic3_mmc_resources[1].start >>= asic->bus_shift; - asic3_mmc_resources[1].end >>= asic->bus_shift; asic3_cell_mmc.platform_data = &asic3_cell_mmc; asic3_cell_mmc.data_size = sizeof(asic3_cell_mmc); @@ -820,7 +841,10 @@ static int __init asic3_mfd_probe(struct platform_device *pdev, static void asic3_mfd_remove(struct platform_device *pdev) { + struct asic3 *asic = platform_get_drvdata(pdev); + mfd_remove_devices(&pdev->dev); + iounmap(asic->tmio_cnf); } /* Core */ diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c index 0a255c1f1ce7..bcf4687d4af5 100644 --- a/drivers/mfd/t7l66xb.c +++ b/drivers/mfd/t7l66xb.c @@ -38,6 +38,19 @@ enum { T7L66XB_CELL_MMC, }; +static const struct resource t7l66xb_mmc_resources[] = { + { + .start = 0x800, + .end = 0x9ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_T7L66XB_MMC, + .end = IRQ_T7L66XB_MMC, + .flags = IORESOURCE_IRQ, + }, +}; + #define SCR_REVID 0x08 /* b Revision ID */ #define SCR_IMR 0x42 /* b Interrupt Mask */ #define SCR_DEV_CTL 0xe0 /* b Device control */ @@ -83,6 +96,9 @@ static int t7l66xb_mmc_enable(struct platform_device *mmc) spin_unlock_irqrestore(&t7l66xb->lock, flags); + tmio_core_mmc_enable(t7l66xb->scr + 0x200, 0, + t7l66xb_mmc_resources[0].start & 0xfffe); + return 0; } @@ -106,28 +122,28 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc) return 0; } +static void t7l66xb_mmc_pwr(struct platform_device *mmc, int state) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct t7l66xb *t7l66xb = platform_get_drvdata(dev); + + tmio_core_mmc_pwr(t7l66xb->scr + 0x200, 0, state); +} + +static void t7l66xb_mmc_clk_div(struct platform_device *mmc, int state) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct t7l66xb *t7l66xb = platform_get_drvdata(dev); + + tmio_core_mmc_clk_div(t7l66xb->scr + 0x200, 0, state); +} + /*--------------------------------------------------------------------------*/ static struct tmio_mmc_data t7166xb_mmc_data = { .hclk = 24000000, -}; - -static const struct resource t7l66xb_mmc_resources[] = { - { - .start = 0x800, - .end = 0x9ff, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x200, - .end = 0x2ff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_T7L66XB_MMC, - .end = IRQ_T7L66XB_MMC, - .flags = IORESOURCE_IRQ, - }, + .set_pwr = t7l66xb_mmc_pwr, + .set_clk_div = t7l66xb_mmc_clk_div, }; static const struct resource t7l66xb_nand_resources[] = { @@ -282,6 +298,9 @@ static int t7l66xb_resume(struct platform_device *dev) if (pdata && pdata->resume) pdata->resume(dev); + tmio_core_mmc_enable(t7l66xb->scr + 0x200, 0, + t7l66xb_mmc_resources[0].start & 0xfffe); + return 0; } #else diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c index 3280ab33f88a..5c7f04343d5c 100644 --- a/drivers/mfd/tc6387xb.c +++ b/drivers/mfd/tc6387xb.c @@ -22,28 +22,52 @@ enum { TC6387XB_CELL_MMC, }; +struct tc6387xb { + void __iomem *scr; + struct clk *clk32k; + struct resource rscr; +}; + +static struct resource tc6387xb_mmc_resources[] = { + { + .start = 0x800, + .end = 0x9ff, + .flags = IORESOURCE_MEM, + }, + { + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ, + }, +}; + +/*--------------------------------------------------------------------------*/ + #ifdef CONFIG_PM static int tc6387xb_suspend(struct platform_device *dev, pm_message_t state) { - struct clk *clk32k = platform_get_drvdata(dev); + struct tc6387xb *tc6387xb = platform_get_drvdata(dev); struct tc6387xb_platform_data *pdata = dev->dev.platform_data; if (pdata && pdata->suspend) pdata->suspend(dev); - clk_disable(clk32k); + clk_disable(tc6387xb->clk32k); return 0; } static int tc6387xb_resume(struct platform_device *dev) { - struct clk *clk32k = platform_get_drvdata(dev); + struct tc6387xb *tc6387xb = platform_get_drvdata(dev); struct tc6387xb_platform_data *pdata = dev->dev.platform_data; - clk_enable(clk32k); + clk_enable(tc6387xb->clk32k); if (pdata && pdata->resume) pdata->resume(dev); + tmio_core_mmc_resume(tc6387xb->scr + 0x200, 0, + tc6387xb_mmc_resources[0].start & 0xfffe); + return 0; } #else @@ -53,12 +77,32 @@ static int tc6387xb_resume(struct platform_device *dev) /*--------------------------------------------------------------------------*/ +static void tc6387xb_mmc_pwr(struct platform_device *mmc, int state) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct tc6387xb *tc6387xb = platform_get_drvdata(dev); + + tmio_core_mmc_pwr(tc6387xb->scr + 0x200, 0, state); +} + +static void tc6387xb_mmc_clk_div(struct platform_device *mmc, int state) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct tc6387xb *tc6387xb = platform_get_drvdata(dev); + + tmio_core_mmc_clk_div(tc6387xb->scr + 0x200, 0, state); +} + + static int tc6387xb_mmc_enable(struct platform_device *mmc) { struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct clk *clk32k = platform_get_drvdata(dev); + struct tc6387xb *tc6387xb = platform_get_drvdata(dev); - clk_enable(clk32k); + clk_enable(tc6387xb->clk32k); + + tmio_core_mmc_enable(tc6387xb->scr + 0x200, 0, + tc6387xb_mmc_resources[0].start & 0xfffe); return 0; } @@ -66,36 +110,20 @@ static int tc6387xb_mmc_enable(struct platform_device *mmc) static int tc6387xb_mmc_disable(struct platform_device *mmc) { struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct clk *clk32k = platform_get_drvdata(dev); + struct tc6387xb *tc6387xb = platform_get_drvdata(dev); - clk_disable(clk32k); + clk_disable(tc6387xb->clk32k); return 0; } -/*--------------------------------------------------------------------------*/ - static struct tmio_mmc_data tc6387xb_mmc_data = { .hclk = 24000000, + .set_pwr = tc6387xb_mmc_pwr, + .set_clk_div = tc6387xb_mmc_clk_div, }; -static struct resource tc6387xb_mmc_resources[] = { - { - .start = 0x800, - .end = 0x9ff, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x200, - .end = 0x2ff, - .flags = IORESOURCE_MEM, - }, - { - .start = 0, - .end = 0, - .flags = IORESOURCE_IRQ, - }, -}; +/*--------------------------------------------------------------------------*/ static struct mfd_cell tc6387xb_cells[] = { [TC6387XB_CELL_MMC] = { @@ -111,8 +139,9 @@ static struct mfd_cell tc6387xb_cells[] = { static int tc6387xb_probe(struct platform_device *dev) { struct tc6387xb_platform_data *pdata = dev->dev.platform_data; - struct resource *iomem; + struct resource *iomem, *rscr; struct clk *clk32k; + struct tc6387xb *tc6387xb; int irq, ret; iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); @@ -120,18 +149,40 @@ static int tc6387xb_probe(struct platform_device *dev) return -EINVAL; } + tc6387xb = kzalloc(sizeof *tc6387xb, GFP_KERNEL); + if (!tc6387xb) + return -ENOMEM; + ret = platform_get_irq(dev, 0); if (ret >= 0) irq = ret; else - goto err_resource; + goto err_no_irq; clk32k = clk_get(&dev->dev, "CLK_CK32K"); if (IS_ERR(clk32k)) { ret = PTR_ERR(clk32k); - goto err_resource; + goto err_no_clk; } - platform_set_drvdata(dev, clk32k); + + rscr = &tc6387xb->rscr; + rscr->name = "tc6387xb-core"; + rscr->start = iomem->start; + rscr->end = iomem->start + 0xff; + rscr->flags = IORESOURCE_MEM; + + ret = request_resource(iomem, rscr); + if (ret) + goto err_resource; + + tc6387xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1); + if (!tc6387xb->scr) { + ret = -ENOMEM; + goto err_ioremap; + } + + tc6387xb->clk32k = clk32k; + platform_set_drvdata(dev, tc6387xb); if (pdata && pdata->enable) pdata->enable(dev); @@ -149,8 +200,13 @@ static int tc6387xb_probe(struct platform_device *dev) if (!ret) return 0; - clk_put(clk32k); +err_ioremap: + release_resource(&tc6387xb->rscr); err_resource: + clk_put(clk32k); +err_no_clk: +err_no_irq: + kfree(tc6387xb); return ret; } @@ -195,3 +251,4 @@ MODULE_DESCRIPTION("Toshiba TC6387XB core driver"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Ian Molton"); MODULE_ALIAS("platform:tc6387xb"); + diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c index 1429a7341a9a..4bc5a08a2b09 100644 --- a/drivers/mfd/tc6393xb.c +++ b/drivers/mfd/tc6393xb.c @@ -136,10 +136,6 @@ static int tc6393xb_nand_enable(struct platform_device *nand) return 0; } -static struct tmio_mmc_data tc6393xb_mmc_data = { - .hclk = 24000000, -}; - static struct resource __devinitdata tc6393xb_nand_resources[] = { { .start = 0x1000, @@ -164,11 +160,6 @@ static struct resource __devinitdata tc6393xb_mmc_resources[] = { .end = 0x9ff, .flags = IORESOURCE_MEM, }, - { - .start = 0x200, - .end = 0x2ff, - .flags = IORESOURCE_MEM, - }, { .start = IRQ_TC6393_MMC, .end = IRQ_TC6393_MMC, @@ -346,6 +337,50 @@ int tc6393xb_lcd_mode(struct platform_device *fb, } EXPORT_SYMBOL(tc6393xb_lcd_mode); +static int tc6393xb_mmc_enable(struct platform_device *mmc) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + + tmio_core_mmc_enable(tc6393xb->scr + 0x200, 0, + tc6393xb_mmc_resources[0].start & 0xfffe); + + return 0; +} + +static int tc6393xb_mmc_resume(struct platform_device *mmc) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + + tmio_core_mmc_resume(tc6393xb->scr + 0x200, 0, + tc6393xb_mmc_resources[0].start & 0xfffe); + + return 0; +} + +static void tc6393xb_mmc_pwr(struct platform_device *mmc, int state) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + + tmio_core_mmc_pwr(tc6393xb->scr + 0x200, 0, state); +} + +static void tc6393xb_mmc_clk_div(struct platform_device *mmc, int state) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + + tmio_core_mmc_clk_div(tc6393xb->scr + 0x200, 0, state); +} + +static struct tmio_mmc_data tc6393xb_mmc_data = { + .hclk = 24000000, + .set_pwr = tc6393xb_mmc_pwr, + .set_clk_div = tc6393xb_mmc_clk_div, +}; + static struct mfd_cell __devinitdata tc6393xb_cells[] = { [TC6393XB_CELL_NAND] = { .name = "tmio-nand", @@ -355,6 +390,8 @@ static struct mfd_cell __devinitdata tc6393xb_cells[] = { }, [TC6393XB_CELL_MMC] = { .name = "tmio-mmc", + .enable = tc6393xb_mmc_enable, + .resume = tc6393xb_mmc_resume, .driver_data = &tc6393xb_mmc_data, .num_resources = ARRAY_SIZE(tc6393xb_mmc_resources), .resources = tc6393xb_mmc_resources, @@ -836,3 +873,4 @@ MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov and Dirk Opfer"); MODULE_DESCRIPTION("tc6393xb Toshiba Mobile IO Controller"); MODULE_ALIAS("platform:tc6393xb"); + diff --git a/drivers/mfd/tmio_core.c b/drivers/mfd/tmio_core.c new file mode 100644 index 000000000000..eddc19ae464b --- /dev/null +++ b/drivers/mfd/tmio_core.c @@ -0,0 +1,52 @@ +/* + * Copyright(c) 2009 Ian Molton + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base) +{ + /* Enable the MMC/SD Control registers */ + sd_config_write16(cnf, shift, CNF_CMD, SDCREN); + sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe); + + /* Disable SD power during suspend */ + sd_config_write8(cnf, shift, CNF_PWR_CTL_3, 0x01); + + /* The below is required but why? FIXME */ + sd_config_write8(cnf, shift, CNF_STOP_CLK_CTL, 0x1f); + + /* Power down SD bus */ + sd_config_write8(cnf, shift, CNF_PWR_CTL_2, 0x00); + + return 0; +} +EXPORT_SYMBOL(tmio_core_mmc_enable); + +int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base) +{ + + /* Enable the MMC/SD Control registers */ + sd_config_write16(cnf, shift, CNF_CMD, SDCREN); + sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe); + + return 0; +} +EXPORT_SYMBOL(tmio_core_mmc_resume); + +void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state) +{ + sd_config_write8(cnf, shift, CNF_PWR_CTL_2, state ? 0x02 : 0x00); +} +EXPORT_SYMBOL(tmio_core_mmc_pwr); + +void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state) +{ + sd_config_write8(cnf, shift, CNF_SD_CLK_MODE, state ? 1 : 0); +} +EXPORT_SYMBOL(tmio_core_mmc_clk_div); + diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index 7cccc8523747..e22c3fa3516a 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -46,7 +46,9 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock) clk |= 0x100; } - sd_config_write8(host, CNF_SD_CLK_MODE, clk >> 22); + if (host->set_clk_div) + host->set_clk_div(host->pdev, (clk>>22) & 1); + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff); } @@ -427,12 +429,13 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* Power sequence - OFF -> ON -> UP */ switch (ios->power_mode) { case MMC_POWER_OFF: /* power down SD bus */ - sd_config_write8(host, CNF_PWR_CTL_2, 0x00); + if (host->set_pwr) + host->set_pwr(host->pdev, 0); tmio_mmc_clk_stop(host); break; case MMC_POWER_ON: /* power up SD bus */ - - sd_config_write8(host, CNF_PWR_CTL_2, 0x02); + if (host->set_pwr) + host->set_pwr(host->pdev, 1); break; case MMC_POWER_UP: /* start bus clock */ tmio_mmc_clk_start(host); @@ -485,21 +488,15 @@ static int tmio_mmc_resume(struct platform_device *dev) { struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; struct mmc_host *mmc = platform_get_drvdata(dev); - struct tmio_mmc_host *host = mmc_priv(mmc); int ret = 0; /* Tell the MFD core we are ready to be enabled */ - if (cell->enable) { - ret = cell->enable(dev); + if (cell->resume) { + ret = cell->resume(dev); if (ret) goto out; } - /* Enable the MMC/SD Control registers */ - sd_config_write16(host, CNF_CMD, SDCREN); - sd_config_write32(host, CNF_CTL_BASE, - (dev->resource[0].start >> host->bus_shift) & 0xfffe); - mmc_resume_host(mmc); out: @@ -514,17 +511,16 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) { struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; struct tmio_mmc_data *pdata; - struct resource *res_ctl, *res_cnf; + struct resource *res_ctl; struct tmio_mmc_host *host; struct mmc_host *mmc; int ret = -EINVAL; - if (dev->num_resources != 3) + if (dev->num_resources != 2) goto out; res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0); - res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1); - if (!res_ctl || !res_cnf) + if (!res_ctl) goto out; pdata = cell->driver_data; @@ -539,8 +535,12 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) host = mmc_priv(mmc); host->mmc = mmc; + host->pdev = dev; platform_set_drvdata(dev, mmc); + host->set_pwr = pdata->set_pwr; + host->set_clk_div = pdata->set_clk_div; + /* SD control register space size is 0x200, 0x400 for bus_shift=1 */ host->bus_shift = resource_size(res_ctl) >> 10; @@ -548,10 +548,6 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) if (!host->ctl) goto host_free; - host->cnf = ioremap(res_cnf->start, resource_size(res_cnf)); - if (!host->cnf) - goto unmap_ctl; - mmc->ops = &tmio_mmc_ops; mmc->caps = MMC_CAP_4_BIT_DATA; mmc->f_max = pdata->hclk; @@ -562,23 +558,9 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) if (cell->enable) { ret = cell->enable(dev); if (ret) - goto unmap_cnf; + goto unmap_ctl; } - /* Enable the MMC/SD Control registers */ - sd_config_write16(host, CNF_CMD, SDCREN); - sd_config_write32(host, CNF_CTL_BASE, - (dev->resource[0].start >> host->bus_shift) & 0xfffe); - - /* Disable SD power during suspend */ - sd_config_write8(host, CNF_PWR_CTL_3, 0x01); - - /* The below is required but why? FIXME */ - sd_config_write8(host, CNF_STOP_CLK_CTL, 0x1f); - - /* Power down SD bus*/ - sd_config_write8(host, CNF_PWR_CTL_2, 0x00); - tmio_mmc_clk_stop(host); reset(host); @@ -586,14 +568,14 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) if (ret >= 0) host->irq = ret; else - goto unmap_cnf; + goto unmap_ctl; disable_mmc_irqs(host, TMIO_MASK_ALL); ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING, dev_name(&dev->dev), host); if (ret) - goto unmap_cnf; + goto unmap_ctl; mmc_add_host(mmc); @@ -605,8 +587,6 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) return 0; -unmap_cnf: - iounmap(host->cnf); unmap_ctl: iounmap(host->ctl); host_free: @@ -626,7 +606,6 @@ static int __devexit tmio_mmc_remove(struct platform_device *dev) mmc_remove_host(mmc); free_irq(host->irq, host); iounmap(host->ctl); - iounmap(host->cnf); mmc_free_host(mmc); } diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index 9fa998594974..692dc23363b9 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -11,26 +11,6 @@ #include -#define CNF_CMD 0x04 -#define CNF_CTL_BASE 0x10 -#define CNF_INT_PIN 0x3d -#define CNF_STOP_CLK_CTL 0x40 -#define CNF_GCLK_CTL 0x41 -#define CNF_SD_CLK_MODE 0x42 -#define CNF_PIN_STATUS 0x44 -#define CNF_PWR_CTL_1 0x48 -#define CNF_PWR_CTL_2 0x49 -#define CNF_PWR_CTL_3 0x4a -#define CNF_CARD_DETECT_MODE 0x4c -#define CNF_SD_SLOT 0x50 -#define CNF_EXT_GCLK_CTL_1 0xf0 -#define CNF_EXT_GCLK_CTL_2 0xf1 -#define CNF_EXT_GCLK_CTL_3 0xf9 -#define CNF_SD_LED_EN_1 0xfa -#define CNF_SD_LED_EN_2 0xfe - -#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/ - #define CTL_SD_CMD 0x00 #define CTL_ARG_REG 0x04 #define CTL_STOP_INTERNAL_ACTION 0x08 @@ -110,7 +90,6 @@ struct tmio_mmc_host { - void __iomem *cnf; void __iomem *ctl; unsigned long bus_shift; struct mmc_command *cmd; @@ -119,10 +98,16 @@ struct tmio_mmc_host { struct mmc_host *mmc; int irq; + /* Callbacks for clock / power control */ + void (*set_pwr)(struct platform_device *host, int state); + void (*set_clk_div)(struct platform_device *host, int state); + /* pio related stuff */ struct scatterlist *sg_ptr; unsigned int sg_len; unsigned int sg_off; + + struct platform_device *pdev; }; #include @@ -163,25 +148,6 @@ static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift)); } -static inline void sd_config_write8(struct tmio_mmc_host *host, int addr, - u8 val) -{ - writeb(val, host->cnf + (addr << host->bus_shift)); -} - -static inline void sd_config_write16(struct tmio_mmc_host *host, int addr, - u16 val) -{ - writew(val, host->cnf + (addr << host->bus_shift)); -} - -static inline void sd_config_write32(struct tmio_mmc_host *host, int addr, - u32 val) -{ - writew(val, host->cnf + (addr << host->bus_shift)); - writew(val >> 16, host->cnf + ((addr + 2) << host->bus_shift)); -} - #include #include diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 6b9c5d06690c..9cb1834deffa 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -2,6 +2,8 @@ #define MFD_TMIO_H #include +#include +#include #define tmio_ioread8(addr) readb(addr) #define tmio_ioread16(addr) readw(addr) @@ -18,11 +20,48 @@ writew((val) >> 16, (addr) + 2); \ } while (0) +#define CNF_CMD 0x04 +#define CNF_CTL_BASE 0x10 +#define CNF_INT_PIN 0x3d +#define CNF_STOP_CLK_CTL 0x40 +#define CNF_GCLK_CTL 0x41 +#define CNF_SD_CLK_MODE 0x42 +#define CNF_PIN_STATUS 0x44 +#define CNF_PWR_CTL_1 0x48 +#define CNF_PWR_CTL_2 0x49 +#define CNF_PWR_CTL_3 0x4a +#define CNF_CARD_DETECT_MODE 0x4c +#define CNF_SD_SLOT 0x50 +#define CNF_EXT_GCLK_CTL_1 0xf0 +#define CNF_EXT_GCLK_CTL_2 0xf1 +#define CNF_EXT_GCLK_CTL_3 0xf9 +#define CNF_SD_LED_EN_1 0xfa +#define CNF_SD_LED_EN_2 0xfe + +#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/ + +#define sd_config_write8(base, shift, reg, val) \ + tmio_iowrite8((val), (base) + ((reg) << (shift))) +#define sd_config_write16(base, shift, reg, val) \ + tmio_iowrite16((val), (base) + ((reg) << (shift))) +#define sd_config_write32(base, shift, reg, val) \ + do { \ + tmio_iowrite16((val), (base) + ((reg) << (shift))); \ + tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \ + } while (0) + +int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); +int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); +void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state); +void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state); + /* * data for the MMC controller */ struct tmio_mmc_data { const unsigned int hclk; + void (*set_pwr)(struct platform_device *host, int state); + void (*set_clk_div)(struct platform_device *host, int state); }; /* From 8e6ba2dfa2d6c4691a83a63e211990a8bd7b788b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 7 Jan 2010 16:16:14 +0000 Subject: [PATCH 1172/1626] mfd: WM835x GPIO direction register is not locked No need to set the security key when writing to it. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 8485a7018060..9a970bd68775 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -134,8 +134,7 @@ static inline int is_reg_locked(struct wm8350 *wm8350, u8 reg) wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY) return 0; - if ((reg == WM8350_GPIO_CONFIGURATION_I_O) || - (reg >= WM8350_GPIO_FUNCTION_SELECT_1 && + if ((reg >= WM8350_GPIO_FUNCTION_SELECT_1 && reg <= WM8350_GPIO_FUNCTION_SELECT_4) || (reg >= WM8350_BATTERY_CHARGER_CONTROL_1 && reg <= WM8350_BATTERY_CHARGER_CONTROL_3)) From 1e02b2c32484bfe0c5564d9be060b7d9821307b9 Mon Sep 17 00:00:00 2001 From: Alberto Panizzo Date: Mon, 14 Dec 2009 18:18:05 +0100 Subject: [PATCH 1173/1626] mfd: Unlock mc13783 before subsystems initialisation, at probe time. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With this, mc13783 subsystems drivers can configure the mc13783 chip reading and writing registers. Signed-off-by: Alberto Panizzo Acked-by: Uwe Kleine-König Signed-off-by: Samuel Ortiz --- drivers/mfd/mc13783-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/mc13783-core.c b/drivers/mfd/mc13783-core.c index a1ade2324ea9..735c8a4d164f 100644 --- a/drivers/mfd/mc13783-core.c +++ b/drivers/mfd/mc13783-core.c @@ -619,6 +619,8 @@ err_revision: } /* This should go away (END) */ + mc13783_unlock(mc13783); + if (pdata->flags & MC13783_USE_ADC) mc13783_add_subdevice(mc13783, "mc13783-adc"); @@ -641,8 +643,6 @@ err_revision: if (pdata->flags & MC13783_USE_TOUCHSCREEN) mc13783_add_subdevice(mc13783, "mc13783-ts"); - mc13783_unlock(mc13783); - return 0; } From c718aff2e673a4f42de2a8b9f43bbfd700ce9544 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 24 Dec 2009 08:31:44 +0000 Subject: [PATCH 1174/1626] sh: ms7724: Correct sh-eth EEPROM polling timeout. This converts the cpu_relax() to a udelay(1), which fixes up issues with the EEPROM polling occasionally timing out. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7724/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 5d0f70b46c97..858ecb25d469 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -533,7 +533,7 @@ static int __init sh_eth_is_eeprom_ready(void) while (t--) { if (!ctrl_inw(EEPROM_STAT)) return 1; - cpu_relax(); + udelay(1); } printk(KERN_ERR "ms7724se can not access to eeprom\n"); From b53e9b5ebd5c6e718f54bcacd4e97b71533ca681 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 14 Jan 2010 20:36:55 +0100 Subject: [PATCH 1175/1626] ARM: 5882/1: ARM: Fix uncompress code compile for different defines of flush(void) Because of the include of the decompress_inflate.c file from boot/compress/misc.c, there are different flush() defines: In file included from arch/arm/boot/compressed/misc.c:249: arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:138:29: error: macro "flush" passed 2 arguments, but takes just 0 Fix this by removing the define of flush() in misc.c for CONFIG_DEBUG_ICEDCC as it's already defined in mach/uncompress.h, and that is being included unconditionally. Also use a static inline function instead of define for mach-mxc and mach-gemini to avoid similar bug for those platforms. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/boot/compressed/misc.c | 1 - arch/arm/mach-gemini/include/mach/uncompress.h | 4 +++- arch/arm/plat-mxc/include/mach/uncompress.h | 4 +++- 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 7e0fe4d42c7b..af6479fae931 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -88,7 +88,6 @@ static void icedcc_putc(int ch) #endif #define putc(ch) icedcc_putc(ch) -#define flush() do { } while (0) #endif static void putstr(const char *ptr) diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h index 59c5df7e716c..5483f61a8061 100644 --- a/arch/arm/mach-gemini/include/mach/uncompress.h +++ b/arch/arm/mach-gemini/include/mach/uncompress.h @@ -30,7 +30,9 @@ static inline void putc(char c) UART[UART_TX] = c; } -#define flush() do { } while (0) +static inline void flush(void) +{ +} /* * nothing to do diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 4d5d395ad63b..d49384cb1e97 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -60,7 +60,9 @@ static void putc(int ch) UART(TXR) = ch; } -#define flush() do { } while (0) +static inline void flush(void) +{ +} #define MX1_UART1_BASE_ADDR 0x00206000 #define MX25_UART1_BASE_ADDR 0x43f90000 From 808c569f3609b37642d1e08373e3de829b99d0f8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 18 Jan 2010 14:16:24 +0100 Subject: [PATCH 1176/1626] ALSA: Remove warning message for invalid OSS minor ranges When a card instance with a higher card number is registered, warning messages are spewed eventually with stack traces due to the invalid minor number for OSS device registration. For example, thinkpad-acpi registers the card number 29 as default, and you'll see always these messages. This is rather confusing (and worries users), thus better to return simply the error code. Signed-off-by: Takashi Iwai --- sound/core/sound_oss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/sound_oss.c b/sound/core/sound_oss.c index 7fe12264ff80..0c164e5e4322 100644 --- a/sound/core/sound_oss.c +++ b/sound/core/sound_oss.c @@ -93,7 +93,7 @@ static int snd_oss_kernel_minor(int type, struct snd_card *card, int dev) default: return -EINVAL; } - if (snd_BUG_ON(minor < 0 || minor >= SNDRV_OSS_MINORS)) + if (minor < 0 || minor >= SNDRV_OSS_MINORS) return -EINVAL; return minor; } From ea9d8e3f45404d411c00ae67b45cc35c58265bb7 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Thu, 7 Jan 2010 11:22:44 +0800 Subject: [PATCH 1177/1626] clockevent: Don't remove broadcast device when cpu is dead Marc reported that the BUG_ON in clockevents_notify() triggers on his system. This happens because the kernel tries to remove an active clock event device (used for broadcasting) from the device list. The handling of devices which can be used as per cpu device and as a global broadcast device is suboptimal. The simplest solution for now (and for stable) is to check whether the device is used as global broadcast device, but this needs to be revisited. [ tglx: restored the cpuweight check and massaged the changelog ] Reported-by: Marc Dionne Tested-by: Marc Dionne Signed-off-by: Xiaotian Feng LKML-Reference: <1262834564-13033-1-git-send-email-dfeng@redhat.com> Signed-off-by: Thomas Gleixner Cc: stable@kernel.org --- kernel/time/clockevents.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index 6f740d9f0948..d7395fdfb9f3 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -259,7 +259,8 @@ void clockevents_notify(unsigned long reason, void *arg) cpu = *((int *)arg); list_for_each_entry_safe(dev, tmp, &clockevent_devices, list) { if (cpumask_test_cpu(cpu, dev->cpumask) && - cpumask_weight(dev->cpumask) == 1) { + cpumask_weight(dev->cpumask) == 1 && + !tick_is_broadcast_device(dev)) { BUG_ON(dev->mode != CLOCK_EVT_MODE_UNUSED); list_del(&dev->list); } From a7b22962776109b5bfe3a3efa4f42622318c547d Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Mon, 18 Jan 2010 15:04:32 +0100 Subject: [PATCH 1178/1626] ARM: 5883/1: Revert "disable NX support for OABI-supporting kernels" This reverts commit 14f0aa359365e8a93a77b71e3b840274b9b4dcb1. That commit was needed earlier because system call restarting for OABI (compat) required an executable stack and thus had problems with NX. Since ab72b00734ae4d0b ("ARM: Fix signal restart issues with NX and OABI compat") has reworked the code to not require an executable stack anymore, we can re-enable NX support for kernels with OABI (compat) support. Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/kernel/elf.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c index 950391f194c4..d4a0da1e48f4 100644 --- a/arch/arm/kernel/elf.c +++ b/arch/arm/kernel/elf.c @@ -78,15 +78,6 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack) return 1; if (cpu_architecture() < CPU_ARCH_ARMv6) return 1; -#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT) - /* - * If we have support for OABI programs, we can never allow NX - * support - our signal syscall restart mechanism relies upon - * being able to execute code placed on the user stack. - */ - return 1; -#else return 0; -#endif } EXPORT_SYMBOL(arm_elf_read_implies_exec); From ce9c37f1318d98c357ab733be51b768ba138c0b0 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 28 Dec 2009 14:21:46 +0100 Subject: [PATCH 1179/1626] microblaze: Wire up recvmmsg syscall Patch a2e2725541fad72416326798c2d7fa4dafb7d337 should contain change in unistd.h too. The same problem had MIPS. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/unistd.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index cb05a07e55e9..1ac847b85685 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -382,8 +382,9 @@ #define __NR_pwritev 364 /* new */ #define __NR_rt_tgsigqueueinfo 365 /* new */ #define __NR_perf_event_open 366 /* new */ +#define __NR_recvmmsg 367 /* new */ -#define __NR_syscalls 367 +#define __NR_syscalls 368 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ From 4a3bb9a90083c064031f15c2ac38bcf68c3487e6 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 28 Dec 2009 14:24:21 +0100 Subject: [PATCH 1180/1626] microblaze: Enable accept4 syscall We had wrong name in unistd.h + I wire up this syscall in syscall table. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/unistd.h | 2 +- arch/microblaze/kernel/syscall_table.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index 1ac847b85685..2b67e92a773c 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -377,7 +377,7 @@ #define __NR_shutdown 359 /* new */ #define __NR_sendmsg 360 /* new */ #define __NR_recvmsg 361 /* new */ -#define __NR_accept04 362 /* new */ +#define __NR_accept4 362 /* new */ #define __NR_preadv 363 /* new */ #define __NR_pwritev 364 /* new */ #define __NR_rt_tgsigqueueinfo 365 /* new */ diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 4088be7d4e29..03376dc814c9 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -366,7 +366,7 @@ ENTRY(sys_call_table) .long sys_shutdown .long sys_sendmsg /* 360 */ .long sys_recvmsg - .long sys_ni_syscall + .long sys_accept4 .long sys_ni_syscall .long sys_ni_syscall .long sys_rt_tgsigqueueinfo /* 365 */ From 90974cb4cc283b36fe00b594446aba9177ac3287 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 28 Dec 2009 14:25:15 +0100 Subject: [PATCH 1181/1626] microblaze: Add PT_ macros for special purpose regs PT_ macros are used by gdb and strace uses them too. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/ptrace.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h index a917dc517736..d74dbfb92c04 100644 --- a/arch/microblaze/include/asm/ptrace.h +++ b/arch/microblaze/include/asm/ptrace.h @@ -54,6 +54,7 @@ struct pt_regs { int pt_mode; }; +#ifdef __KERNEL__ #define kernel_mode(regs) ((regs)->pt_mode) #define user_mode(regs) (!kernel_mode(regs)) @@ -62,6 +63,19 @@ struct pt_regs { void show_regs(struct pt_regs *); +#else /* __KERNEL__ */ + +/* pt_regs offsets used by gdbserver etc in ptrace syscalls */ +#define PT_GPR(n) ((n) * sizeof(microblaze_reg_t)) +#define PT_PC (32 * sizeof(microblaze_reg_t)) +#define PT_MSR (33 * sizeof(microblaze_reg_t)) +#define PT_EAR (34 * sizeof(microblaze_reg_t)) +#define PT_ESR (35 * sizeof(microblaze_reg_t)) +#define PT_FSR (36 * sizeof(microblaze_reg_t)) +#define PT_KERNEL_MODE (37 * sizeof(microblaze_reg_t)) + +#endif /* __KERNEL */ + #endif /* __ASSEMBLY__ */ #endif /* _ASM_MICROBLAZE_PTRACE_H */ From 296e2603cfdb9e80cb4c7c4535d904524d1eac13 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 12 Jan 2010 11:05:49 +0100 Subject: [PATCH 1182/1626] microblaze: Add missing double apostrophe in Kconfig Signed-off-by: Michal Simek --- arch/microblaze/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index fd53e500be67..cd5837e298b2 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -90,7 +90,7 @@ source "arch/microblaze/platform/Kconfig.platform" menu "Processor type and features" -source kernel/time/Kconfig +source "kernel/time/Kconfig" source "kernel/Kconfig.preempt" From 878194c8237e4fc5276685ec59cb3bfb9341988c Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 13 Jan 2010 15:29:52 +0100 Subject: [PATCH 1183/1626] microblaze: pci_controller->arch_data really is a struct device_node * we are follow powerpc change: 44ef339073f67d4abcc62ae52a5fbc069d7a4d29 Signed-off-by: Michal Simek --- arch/microblaze/kernel/prom_parse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c index ae0352ecd5a9..bf7e6c27e318 100644 --- a/arch/microblaze/kernel/prom_parse.c +++ b/arch/microblaze/kernel/prom_parse.c @@ -256,7 +256,7 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) if (ppdev == NULL) { struct pci_controller *host; host = pci_bus_to_host(pdev->bus); - ppnode = host ? host->arch_data : NULL; + ppnode = host ? host->dn : NULL; /* No node for host bridge ? give up */ if (ppnode == NULL) return -EINVAL; From ebddd63b74dcf1cb676d14328d5852f1fee19a8a Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 18 Jan 2010 16:43:44 +0200 Subject: [PATCH 1184/1626] UBI: fix memory leak in update path When truncating an UBI volume, UBI should allocates a PEB-sized buffer but does not release it, which leads to memory leaks. This patch fixes the issue. Reported-by: Marek Skuczynski Signed-off-by: Artem Bityutskiy Tested-by: Marek Skuczynski Cc: stable@kernel.org --- drivers/mtd/ubi/upd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c index c1d7b880c795..425bf5a3edd4 100644 --- a/drivers/mtd/ubi/upd.c +++ b/drivers/mtd/ubi/upd.c @@ -155,6 +155,7 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, if (err) return err; vol->updating = 0; + return 0; } vol->upd_buf = vmalloc(ubi->leb_size); From 1152dcc28c66a74b5b3f1a3ede0aa6729bfd48e4 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 15 Jan 2010 13:42:58 -0800 Subject: [PATCH 1185/1626] iwlwifi: Fix throughput stall issue in HT mode for 5000 Similar to 6000 and 1000 series, RTS/CTS is the recommended protection mechanism for 5000 series in HT mode based on the HW design. Using RTS/CTS will better protect the inner exchange from interference, especially in highly-congested environment, it also prevent uCode encounter TX FIFO underrun and other HT mode related performance issues. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 33a5866538e7..de45f308b744 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1598,6 +1598,7 @@ struct iwl_cfg iwl5300_agn_cfg = { .use_bsm = false, .ht_greenfield_support = true, .led_compensation = 51, + .use_rts_for_ht = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED, }; @@ -1622,6 +1623,7 @@ struct iwl_cfg iwl5100_bgn_cfg = { .use_bsm = false, .ht_greenfield_support = true, .led_compensation = 51, + .use_rts_for_ht = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, }; @@ -1667,6 +1669,7 @@ struct iwl_cfg iwl5100_agn_cfg = { .use_bsm = false, .ht_greenfield_support = true, .led_compensation = 51, + .use_rts_for_ht = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED, }; @@ -1691,6 +1694,7 @@ struct iwl_cfg iwl5350_agn_cfg = { .use_bsm = false, .ht_greenfield_support = true, .led_compensation = 51, + .use_rts_for_ht = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED, }; @@ -1715,6 +1719,7 @@ struct iwl_cfg iwl5150_agn_cfg = { .use_bsm = false, .ht_greenfield_support = true, .led_compensation = 51, + .use_rts_for_ht = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED, }; From bb5d2db5709e469f4a8c01eaaee9a275ed9772aa Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Fri, 15 Jan 2010 13:42:59 -0800 Subject: [PATCH 1186/1626] iwlwifi: add license to tracing files Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-devtrace.c | 26 +++++++++++++++++++++ drivers/net/wireless/iwlwifi/iwl-devtrace.h | 26 +++++++++++++++++++++ 2 files changed, 52 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.c b/drivers/net/wireless/iwlwifi/iwl-devtrace.c index e7d88d1da15d..83cc4e500a96 100644 --- a/drivers/net/wireless/iwlwifi/iwl-devtrace.c +++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.c @@ -1,3 +1,29 @@ +/****************************************************************************** + * + * Copyright(c) 2009 - 2010 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + #include /* sparse doesn't like tracepoint macros */ diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h index 21361968ab7e..d9c7363b1bbb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-devtrace.h +++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h @@ -1,3 +1,29 @@ +/****************************************************************************** + * + * Copyright(c) 2009 - 2010 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + #if !defined(__IWLWIFI_DEVICE_TRACE) || defined(TRACE_HEADER_MULTI_READ) #define __IWLWIFI_DEVICE_TRACE From e850f68b8f27a76c4377c34f2e216b8e7e10db3d Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sat, 16 Jan 2010 14:36:52 -0500 Subject: [PATCH 1187/1626] mac80211: fix sign error in pid controller While testing the pid rate controller in mac80211_hwsim, I noticed that once the controller reached 54 Mbit rates, it would fail to lower the rate when necessary. The debug log shows: 1945 186786 pf_sample 50 3534 3577 50 My interpretation is that the fixed point scaling of the target error value (pf) is incorrect: the error value of 50 compared to a target of 14 case should result in a scaling value of (14-50) = -36 * 256 or -9216, but instead it is (14 * 256)-50, or 3534. Correct this by doing fixed point scaling after subtraction. Signed-off-by: Bob Copeland Acked-by: Stefano Brivio Acked-by: Mattias Nissler Signed-off-by: John W. Linville --- net/mac80211/rc80211_pid_algo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c index 699d3ed869c4..29bc4c516238 100644 --- a/net/mac80211/rc80211_pid_algo.c +++ b/net/mac80211/rc80211_pid_algo.c @@ -190,7 +190,7 @@ static void rate_control_pid_sample(struct rc_pid_info *pinfo, rate_control_pid_normalize(pinfo, sband->n_bitrates); /* Compute the proportional, integral and derivative errors. */ - err_prop = (pinfo->target << RC_PID_ARITH_SHIFT) - pf; + err_prop = (pinfo->target - pf) << RC_PID_ARITH_SHIFT; err_avg = spinfo->err_avg_sc >> pinfo->smoothing_shift; spinfo->err_avg_sc = spinfo->err_avg_sc - err_avg + err_prop; From f5300e04df78feae8107c1846dd3a9e27c071b2f Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 18 Jan 2010 00:07:38 +0100 Subject: [PATCH 1188/1626] p54pci: rx frame length check A long time ago, a user reported several crashes due to data corruptions which are likely the result of a not-100%-supported, or faulty? PCI bridge. ( http://patchwork.kernel.org/patch/53004/ ) This patch fixes entry #1. "1. p54p_check_rx_ring - skb_over_panic: Under a ping flood or just left running for a bit would panic with a skb_over_panic." As described in the mail: The invalid frame length causes skb_put to bailout and trigger a crash. Note: Simply dropping the frame is problematic, because if its content contains a tx feedback we would lose some portion of the device memory space.... And the driver/mac80211 should handle all other invalid data. Reported-by: Quintin Pitts Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54pci.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index a15962a19b2a..a72f7c2577de 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -197,6 +197,14 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index, i %= ring_limit; continue; } + + if (unlikely(len > priv->common.rx_mtu)) { + if (net_ratelimit()) + dev_err(&priv->pdev->dev, "rx'd frame size " + "exceeds length threshold.\n"); + + len = priv->common.rx_mtu; + } skb_put(skb, len); if (p54_rx(dev, skb)) { From ad580db50ee8dccd069ffcd76d6f70fa6d4a62a8 Mon Sep 17 00:00:00 2001 From: Hin-Tak Leung Date: Mon, 18 Jan 2010 01:24:11 +0000 Subject: [PATCH 1189/1626] zd1211rw: adding 0409:0248 to supported device list Yasuhiro ABE reported success in sourceforge zd1211-dev list. The device is a NEC Aterm WL54GU usb wireless stick. The brand and retail product name NEC, Aterm PA-WL54GU The USB ID's (duh) ID 0409:0248 The chip ID string zd1211rw 1-1:1.0: zd1211b chip 0409:0248 v4810 high 00-1b-8b AL2230S_RF pa0 g--N- The FCC ID unknown Signed-off-by: Hin-Tak Leung Signed-off-by: Yasuhiro ABE Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index ac19ecd19cfe..72d3e437e190 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -62,6 +62,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 }, /* ZD1211B */ { USB_DEVICE(0x0053, 0x5301), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0409, 0x0248), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0411, 0x00da), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B }, From 3c9d8eccd8687f0e770e4d89fd0d73d4f81a985a Mon Sep 17 00:00:00 2001 From: Seth Heasley Date: Thu, 14 Jan 2010 20:58:05 +0000 Subject: [PATCH 1190/1626] [WATCHDOG] iTCO_wdt: Add Intel Cougar Point and PCH DeviceIDs This patch adds the Intel Cougar Point and PCH DeviceIDs for iTCO Watchdog. Signed-off-by: Seth Heasley Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/iTCO_wdt.c | 45 ++++++++++++++++++++++++++++++++++++- 1 file changed, 44 insertions(+), 1 deletion(-) diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index c8a3bec26830..4bdb7f1a9077 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -29,8 +29,9 @@ * document number 313056-003, 313057-017: 82801H (ICH8) * document number 316972-004, 316973-012: 82801I (ICH9) * document number 319973-002, 319974-002: 82801J (ICH10) - * document number 322169-001, 322170-001: 5 Series, 3400 Series (PCH) + * document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH) * document number 320066-003, 320257-008: EP80597 (IICH) + * document number TBD : Cougar Point (CPT) */ /* @@ -100,8 +101,22 @@ enum iTCO_chipsets { TCO_ICH10DO, /* ICH10DO */ TCO_PCH, /* PCH Desktop Full Featured */ TCO_PCHM, /* PCH Mobile Full Featured */ + TCO_P55, /* P55 */ + TCO_PM55, /* PM55 */ + TCO_H55, /* H55 */ + TCO_QM57, /* QM57 */ + TCO_H57, /* H57 */ + TCO_HM55, /* HM55 */ + TCO_Q57, /* Q57 */ + TCO_HM57, /* HM57 */ TCO_PCHMSFF, /* PCH Mobile SFF Full Featured */ + TCO_QS57, /* QS57 */ + TCO_3400, /* 3400 */ + TCO_3420, /* 3420 */ + TCO_3450, /* 3450 */ TCO_EP80579, /* EP80579 */ + TCO_CPTD, /* CPT Desktop */ + TCO_CPTM, /* CPT Mobile */ }; static struct { @@ -144,8 +159,22 @@ static struct { {"ICH10DO", 2}, {"PCH Desktop Full Featured", 2}, {"PCH Mobile Full Featured", 2}, + {"P55", 2}, + {"PM55", 2}, + {"H55", 2}, + {"QM57", 2}, + {"H57", 2}, + {"HM55", 2}, + {"Q57", 2}, + {"HM57", 2}, {"PCH Mobile SFF Full Featured", 2}, + {"QS57", 2}, + {"3400", 2}, + {"3420", 2}, + {"3450", 2}, {"EP80579", 2}, + {"CPT Desktop", 2}, + {"CPT Mobile", 2}, {NULL, 0} }; @@ -216,8 +245,22 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(0x3a14, TCO_ICH10DO)}, { ITCO_PCI_DEVICE(0x3b00, TCO_PCH)}, { ITCO_PCI_DEVICE(0x3b01, TCO_PCHM)}, + { ITCO_PCI_DEVICE(0x3b02, TCO_P55)}, + { ITCO_PCI_DEVICE(0x3b03, TCO_PM55)}, + { ITCO_PCI_DEVICE(0x3b06, TCO_H55)}, + { ITCO_PCI_DEVICE(0x3b07, TCO_QM57)}, + { ITCO_PCI_DEVICE(0x3b08, TCO_H57)}, + { ITCO_PCI_DEVICE(0x3b09, TCO_HM55)}, + { ITCO_PCI_DEVICE(0x3b0a, TCO_Q57)}, + { ITCO_PCI_DEVICE(0x3b0b, TCO_HM57)}, { ITCO_PCI_DEVICE(0x3b0d, TCO_PCHMSFF)}, + { ITCO_PCI_DEVICE(0x3b0f, TCO_QS57)}, + { ITCO_PCI_DEVICE(0x3b12, TCO_3400)}, + { ITCO_PCI_DEVICE(0x3b14, TCO_3420)}, + { ITCO_PCI_DEVICE(0x3b16, TCO_3450)}, { ITCO_PCI_DEVICE(0x5031, TCO_EP80579)}, + { ITCO_PCI_DEVICE(0x1c42, TCO_CPTD)}, + { ITCO_PCI_DEVICE(0x1c43, TCO_CPTM)}, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); From dfea91d5a7c795fd6f4e1a97489a98e4e767463e Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 18 Jan 2010 12:10:48 -0800 Subject: [PATCH 1191/1626] x86, apic: use physical mode for IBM summit platforms Chris McDermott from IBM confirmed that hurricane chipset in IBM summit platforms doesn't support logical flat mode. Irrespective of the other things like apic_id's, total number of logical cpu's, Linux kernel should default to physical mode for this system. The 32-bit kernel does so using the OEM checks for the IBM summit platform. Add a similar OEM platform check for the 64bit kernel too. Otherwise the linux kernel boot can hang on this platform under certain bios/platform settings. Signed-off-by: Suresh Siddha Tested-by: Ananth N Mavinakayanahalli Cc: Chris McDermott Cc: Yinghai Lu Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- arch/x86/kernel/apic/apic_flat_64.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index eacbd2b31d27..e3c3d820c325 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -240,6 +240,11 @@ static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) printk(KERN_DEBUG "system APIC only can use physical flat"); return 1; } + + if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "EXA", 3)) { + printk(KERN_DEBUG "IBM Summit detected, will use apic physical"); + return 1; + } #endif return 0; From bb668da6d6f2bec8a63838c098d9515eccb22cc4 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 18 Jan 2010 12:10:49 -0800 Subject: [PATCH 1192/1626] x86, apic: use logical flat for systems with <= 8 logical cpus We can use logical flat mode if there are <= 8 logical cpu's (irrespective of physical apic id values). This will enable simplified and efficient IPI and device interrupt routing on such platforms. This has been tested to work on both Intel and AMD platforms. Exceptions like IBM summit platform which can't use logical flat mode are addressed by using OEM platform checks. Signed-off-by: Suresh Siddha Signed-off-by: Yinghai Lu Cc: Ananth N Mavinakayanahalli Cc: Chris McDermott Signed-off-by: Linus Torvalds --- arch/x86/kernel/apic/apic.c | 15 +-------------- arch/x86/kernel/apic/probe_64.c | 8 +++----- 2 files changed, 4 insertions(+), 19 deletions(-) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index e80f291472a4..3987e4408f75 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -61,12 +61,6 @@ unsigned int boot_cpu_physical_apicid = -1U; /* * The highest APIC ID seen during enumeration. - * - * This determines the messaging protocol we can use: if all APIC IDs - * are in the 0 ... 7 range, then we can use logical addressing which - * has some performance advantages (better broadcasting). - * - * If there's an APIC ID above 8, we use physical addressing. */ unsigned int max_physical_apicid; @@ -1898,14 +1892,7 @@ void __cpuinit generic_processor_info(int apicid, int version) max_physical_apicid = apicid; #ifdef CONFIG_X86_32 - /* - * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y - * but we need to work other dependencies like SMP_SUSPEND etc - * before this can be done without some confusion. - * if (CPU_HOTPLUG_ENABLED || num_processors > 8) - * - Ashok Raj - */ - if (max_physical_apicid >= 8) { + if (num_processors > 8) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_INTEL: if (!APIC_XAPIC(version)) { diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c index 65edc180fc82..450fe2064a14 100644 --- a/arch/x86/kernel/apic/probe_64.c +++ b/arch/x86/kernel/apic/probe_64.c @@ -64,15 +64,13 @@ void __init default_setup_apic_routing(void) apic = &apic_x2apic_phys; else apic = &apic_x2apic_cluster; - printk(KERN_INFO "Setting APIC routing to %s\n", apic->name); } #endif - if (apic == &apic_flat) { - if (max_physical_apicid >= 8) + if (apic == &apic_flat && num_processors > 8) apic = &apic_physflat; - printk(KERN_INFO "Setting APIC routing to %s\n", apic->name); - } + + printk(KERN_INFO "Setting APIC routing to %s\n", apic->name); if (is_vsmp_box()) { /* need to update phys_pkg_id */ From 6eacb2c4cba4c84c2aee13f416cd476777e8400a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 19 Jan 2010 17:00:06 +0900 Subject: [PATCH 1193/1626] sh: unwire sys_recvmmsg. sh32 at the moment only uses sys_socketcall to reach these, so unwire recvmmsg for now. While we're at it, add it to the ignore list, as per the s390 change. Signed-off-by: Paul Mundt --- arch/sh/include/asm/unistd_32.h | 5 +++-- arch/sh/kernel/syscalls_32.S | 1 - 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h index f18c4f9baf27..365744b05269 100644 --- a/arch/sh/include/asm/unistd_32.h +++ b/arch/sh/include/asm/unistd_32.h @@ -345,12 +345,13 @@ #define __NR_pwritev 334 #define __NR_rt_tgsigqueueinfo 335 #define __NR_perf_event_open 336 -#define __NR_recvmmsg 337 -#define NR_syscalls 338 +#define NR_syscalls 337 #ifdef __KERNEL__ +#define __IGNORE_recvmmsg + #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_OLD_STAT diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index 4bd5a1146956..19fd11dd9871 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -353,4 +353,3 @@ ENTRY(sys_call_table) .long sys_pwritev .long sys_rt_tgsigqueueinfo /* 335 */ .long sys_perf_event_open - .long sys_recvmmsg From 79f211b8e17205aae0304c58518fbc58506e52e3 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 19 Jan 2010 17:00:31 +0900 Subject: [PATCH 1194/1626] sh64: wire up sys_accept4. sh64 on the other hand provides both direct broken out syscalls as well as socketcall access. As there are binaries that use both socketcall has to stay around. The current ABI prefers direct syscalls. It was pointed out that when sys_recvmmsg was added in, sys_accept4 was overlooked. This takes care of wiring it up. Signed-off-by: Paul Mundt --- arch/sh/include/asm/unistd_64.h | 3 ++- arch/sh/kernel/syscalls_64.S | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h index 3e7645d11130..25de158aac3a 100644 --- a/arch/sh/include/asm/unistd_64.h +++ b/arch/sh/include/asm/unistd_64.h @@ -386,10 +386,11 @@ #define __NR_rt_tgsigqueueinfo 363 #define __NR_perf_event_open 364 #define __NR_recvmmsg 365 +#define __NR_accept4 366 #ifdef __KERNEL__ -#define NR_syscalls 366 +#define NR_syscalls 367 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index 07d2aaea9ae8..2048a20d7c80 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -392,3 +392,4 @@ sys_call_table: .long sys_rt_tgsigqueueinfo .long sys_perf_event_open .long sys_recvmmsg /* 365 */ + .long sys_accept4 From ec51b7f538c440bfa5a4d538133c659071c02155 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 19 Jan 2010 00:27:58 -0800 Subject: [PATCH 1195/1626] Input: ad7879 - support auxiliary GPIOs via gpiolib Drop the simple fancy sysfs hooks for the aux GPIOs and expose these via the gpiolib interface so that other drivers can use them. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ad7879.c | 209 ++++++++++++++++++++--------- include/linux/spi/ad7879.h | 12 +- 2 files changed, 155 insertions(+), 66 deletions(-) diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index c21e6d3a8844..794d070c6900 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -47,6 +47,7 @@ #include #include #include +#include #include @@ -132,7 +133,9 @@ struct ad7879 { struct input_dev *input; struct work_struct work; struct timer_list timer; - +#ifdef CONFIG_GPIOLIB + struct gpio_chip gc; +#endif struct mutex mutex; unsigned disabled:1; /* P: mutex */ @@ -150,11 +153,9 @@ struct ad7879 { u8 median; u16 x_plate_ohms; u16 pressure_max; - u16 gpio_init; u16 cmd_crtl1; u16 cmd_crtl2; u16 cmd_crtl3; - unsigned gpio:1; }; static int ad7879_read(bus_device *, u8); @@ -237,24 +238,6 @@ static irqreturn_t ad7879_irq(int irq, void *handle) static void ad7879_setup(struct ad7879 *ts) { - ts->cmd_crtl3 = AD7879_YPLUS_BIT | - AD7879_XPLUS_BIT | - AD7879_Z2_BIT | - AD7879_Z1_BIT | - AD7879_TEMPMASK_BIT | - AD7879_AUXVBATMASK_BIT | - AD7879_GPIOALERTMASK_BIT; - - ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR | - AD7879_AVG(ts->averaging) | - AD7879_MFS(ts->median) | - AD7879_FCD(ts->first_conversion_delay) | - ts->gpio_init; - - ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 | - AD7879_ACQ(ts->acquisition_time) | - AD7879_TMR(ts->pen_down_acc_interval); - ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3); ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1); @@ -324,42 +307,8 @@ static ssize_t ad7879_disable_store(struct device *dev, static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store); -static ssize_t ad7879_gpio_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct ad7879 *ts = dev_get_drvdata(dev); - - return sprintf(buf, "%u\n", ts->gpio); -} - -static ssize_t ad7879_gpio_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct ad7879 *ts = dev_get_drvdata(dev); - unsigned long val; - int error; - - error = strict_strtoul(buf, 10, &val); - if (error) - return error; - - mutex_lock(&ts->mutex); - ts->gpio = !!val; - error = ad7879_write(ts->bus, AD7879_REG_CTRL2, - ts->gpio ? - ts->cmd_crtl2 & ~AD7879_GPIO_DATA : - ts->cmd_crtl2 | AD7879_GPIO_DATA); - mutex_unlock(&ts->mutex); - - return error ? : count; -} - -static DEVICE_ATTR(gpio, 0664, ad7879_gpio_show, ad7879_gpio_store); - static struct attribute *ad7879_attributes[] = { &dev_attr_disable.attr, - &dev_attr_gpio.attr, NULL }; @@ -367,6 +316,124 @@ static const struct attribute_group ad7879_attr_group = { .attrs = ad7879_attributes, }; +#ifdef CONFIG_GPIOLIB +static int ad7879_gpio_direction_input(struct gpio_chip *chip, + unsigned gpio) +{ + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + int err; + + mutex_lock(&ts->mutex); + ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIODIR | AD7879_GPIOPOL; + err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + mutex_unlock(&ts->mutex); + + return err; +} + +static int ad7879_gpio_direction_output(struct gpio_chip *chip, + unsigned gpio, int level) +{ + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + int err; + + mutex_lock(&ts->mutex); + ts->cmd_crtl2 &= ~AD7879_GPIODIR; + ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIOPOL; + if (level) + ts->cmd_crtl2 |= AD7879_GPIO_DATA; + else + ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; + + err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + mutex_unlock(&ts->mutex); + + return err; +} + +static int ad7879_gpio_get_value(struct gpio_chip *chip, unsigned gpio) +{ + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + u16 val; + + mutex_lock(&ts->mutex); + val = ad7879_read(ts->bus, AD7879_REG_CTRL2); + mutex_unlock(&ts->mutex); + + return !!(val & AD7879_GPIO_DATA); +} + +static void ad7879_gpio_set_value(struct gpio_chip *chip, + unsigned gpio, int value) +{ + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + + mutex_lock(&ts->mutex); + if (value) + ts->cmd_crtl2 |= AD7879_GPIO_DATA; + else + ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; + + ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + mutex_unlock(&ts->mutex); +} + +static int __devinit ad7879_gpio_add(struct device *dev) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + struct ad7879_platform_data *pdata = dev->platform_data; + int ret = 0; + + if (pdata->gpio_export) { + ts->gc.direction_input = ad7879_gpio_direction_input; + ts->gc.direction_output = ad7879_gpio_direction_output; + ts->gc.get = ad7879_gpio_get_value; + ts->gc.set = ad7879_gpio_set_value; + ts->gc.can_sleep = 1; + ts->gc.base = pdata->gpio_base; + ts->gc.ngpio = 1; + ts->gc.label = "AD7879-GPIO"; + ts->gc.owner = THIS_MODULE; + ts->gc.dev = dev; + + ret = gpiochip_add(&ts->gc); + if (ret) + dev_err(dev, "failed to register gpio %d\n", + ts->gc.base); + } + + return ret; +} + +/* + * We mark ad7879_gpio_remove inline so there is a chance the code + * gets discarded when not needed. We can't do __devinit/__devexit + * markup since it is used in both probe and remove methods. + */ +static inline void ad7879_gpio_remove(struct device *dev) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + struct ad7879_platform_data *pdata = dev->platform_data; + int ret; + + if (pdata->gpio_export) { + ret = gpiochip_remove(&ts->gc); + if (ret) + dev_err(dev, "failed to remove gpio %d\n", + ts->gc.base); + } +} +#else +static inline int ad7879_gpio_add(struct device *dev) +{ + return 0; +} + +static inline void ad7879_gpio_remove(struct device *dev) +{ +} +#endif + static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) { struct input_dev *input_dev; @@ -403,12 +470,6 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) ts->pen_down_acc_interval = pdata->pen_down_acc_interval; ts->median = pdata->median; - if (pdata->gpio_output) - ts->gpio_init = AD7879_GPIO_EN | - (pdata->gpio_default ? 0 : AD7879_GPIO_DATA); - else - ts->gpio_init = AD7879_GPIO_EN | AD7879_GPIODIR; - snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev)); input_dev->name = "AD7879 Touchscreen"; @@ -446,6 +507,23 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) goto err_free_mem; } + ts->cmd_crtl3 = AD7879_YPLUS_BIT | + AD7879_XPLUS_BIT | + AD7879_Z2_BIT | + AD7879_Z1_BIT | + AD7879_TEMPMASK_BIT | + AD7879_AUXVBATMASK_BIT | + AD7879_GPIOALERTMASK_BIT; + + ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR | + AD7879_AVG(ts->averaging) | + AD7879_MFS(ts->median) | + AD7879_FCD(ts->first_conversion_delay); + + ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 | + AD7879_ACQ(ts->acquisition_time) | + AD7879_TMR(ts->pen_down_acc_interval); + ad7879_setup(ts); err = request_irq(bus->irq, ad7879_irq, @@ -460,15 +538,21 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) if (err) goto err_free_irq; - err = input_register_device(input_dev); + err = ad7879_gpio_add(&bus->dev); if (err) goto err_remove_attr; + err = input_register_device(input_dev); + if (err) + goto err_remove_gpio; + dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n", revid >> 8, bus->irq); return 0; +err_remove_gpio: + ad7879_gpio_remove(&bus->dev); err_remove_attr: sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group); err_free_irq: @@ -481,6 +565,7 @@ err_free_mem: static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts) { + ad7879_gpio_remove(&bus->dev); ad7879_disable(ts); sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group); free_irq(ts->bus->irq, ts); diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h index 4231104c9afa..6334cee1a3be 100644 --- a/include/linux/spi/ad7879.h +++ b/include/linux/spi/ad7879.h @@ -28,8 +28,12 @@ struct ad7879_platform_data { * 1 = 4, 2 = 8, 3 = 16 (median > averaging) */ u8 median; - /* 1 = AUX/VBAT/GPIO set to GPIO Output */ - u8 gpio_output; - /* Initial GPIO pin state (valid if gpio_output = 1) */ - u8 gpio_default; + /* 1 = AUX/VBAT/GPIO export GPIO to gpiolib + * requires CONFIG_GPIOLIB + */ + bool gpio_export; + /* identifies the first GPIO number handled by this chip; + * or, if negative, requests dynamic ID allocation. + */ + s32 gpio_base; }; From de4ef86cfce60d2250111f34f8a084e769f23b16 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Sun, 17 Jan 2010 17:16:12 +0000 Subject: [PATCH 1196/1626] dccp: fix dccp rmmod when kernel configured to use slub Hey all- I was tinkering with dccp recently and noticed that I BUG halted the kernel when I rmmod-ed the dccp module. The bug halt occured because the page that I passed to kfree failed the PageCompound and PageSlab test in the slub implementation of kfree. I tracked the problem down to the following set of events: 1) dccp, unlike all other uses of kmem_cache_create, allocates a string dynamically when registering a slab cache. This allocated string is freed when the cache is destroyed. 2) Normally, (1) is not an issue, but when Slub is in use, it is possible that caches are 'merged'. This process causes multiple caches of simmilar configuration to use the same cache data structure. When this happens, the new name of the cache is effectively dropped. 3) (2) results in kmem_cache_name returning an ambigous value (i.e. ccid_kmem_cache_destroy, which uses this fuction to retrieve the name pointer for freeing), is no longer guaranteed that the string it assigned is what is returned. 4) If such merge event occurs, ccid_kmem_cache_destroy frees the wrong pointer, which trips over the BUG in the slub implementation of kfree (since its likely not a slab allocation, but rather a pointer into the static string table section. So, what to do about this. At first blush this is pretty clearly a leak in the information that slub owns, and as such a slub bug. Unfortunately, theres no really good way to fix it, without exposing slub specific implementation details to the generic slab interface. Also, even if we could fix this in slub cleanly, I think the RCU free option would force us to do lots of string duplication, not only in slub, but in every slab allocator. As such, I'd like to propose this solution. Basically, I just move the storage for the kmem cache name to the ccid_operations structure. In so doing, we don't have to do the kstrdup or kfree when we allocate/free the various caches for dccp, and so we avoid the problem, by storing names with static memory, rather than heap, the way all other calls to kmem_cache_create do. I've tested this out myself here, and it solves the problem quite well. Signed-off-by: Neil Horman Acked-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- net/dccp/ccid.c | 18 +++++------------- net/dccp/ccid.h | 2 ++ 2 files changed, 7 insertions(+), 13 deletions(-) diff --git a/net/dccp/ccid.c b/net/dccp/ccid.c index f3e9ba1cfd01..57dfb9c8c4f2 100644 --- a/net/dccp/ccid.c +++ b/net/dccp/ccid.c @@ -77,34 +77,24 @@ int ccid_getsockopt_builtin_ccids(struct sock *sk, int len, return err; } -static struct kmem_cache *ccid_kmem_cache_create(int obj_size, const char *fmt,...) +static struct kmem_cache *ccid_kmem_cache_create(int obj_size, char *slab_name_fmt, const char *fmt,...) { struct kmem_cache *slab; - char slab_name_fmt[32], *slab_name; va_list args; va_start(args, fmt); vsnprintf(slab_name_fmt, sizeof(slab_name_fmt), fmt, args); va_end(args); - slab_name = kstrdup(slab_name_fmt, GFP_KERNEL); - if (slab_name == NULL) - return NULL; - slab = kmem_cache_create(slab_name, sizeof(struct ccid) + obj_size, 0, + slab = kmem_cache_create(slab_name_fmt, sizeof(struct ccid) + obj_size, 0, SLAB_HWCACHE_ALIGN, NULL); - if (slab == NULL) - kfree(slab_name); return slab; } static void ccid_kmem_cache_destroy(struct kmem_cache *slab) { - if (slab != NULL) { - const char *name = kmem_cache_name(slab); - + if (slab != NULL) kmem_cache_destroy(slab); - kfree(name); - } } static int ccid_activate(struct ccid_operations *ccid_ops) @@ -113,6 +103,7 @@ static int ccid_activate(struct ccid_operations *ccid_ops) ccid_ops->ccid_hc_rx_slab = ccid_kmem_cache_create(ccid_ops->ccid_hc_rx_obj_size, + ccid_ops->ccid_hc_rx_slab_name, "ccid%u_hc_rx_sock", ccid_ops->ccid_id); if (ccid_ops->ccid_hc_rx_slab == NULL) @@ -120,6 +111,7 @@ static int ccid_activate(struct ccid_operations *ccid_ops) ccid_ops->ccid_hc_tx_slab = ccid_kmem_cache_create(ccid_ops->ccid_hc_tx_obj_size, + ccid_ops->ccid_hc_tx_slab_name, "ccid%u_hc_tx_sock", ccid_ops->ccid_id); if (ccid_ops->ccid_hc_tx_slab == NULL) diff --git a/net/dccp/ccid.h b/net/dccp/ccid.h index facedd20b531..269958bf7fe9 100644 --- a/net/dccp/ccid.h +++ b/net/dccp/ccid.h @@ -49,6 +49,8 @@ struct ccid_operations { const char *ccid_name; struct kmem_cache *ccid_hc_rx_slab, *ccid_hc_tx_slab; + char ccid_hc_rx_slab_name[32]; + char ccid_hc_tx_slab_name[32]; __u32 ccid_hc_rx_obj_size, ccid_hc_tx_obj_size; /* Interface Routines */ From 4f9c85a1b03bfa5c0a0d8488a3a7766f3c9fb756 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 18 Jan 2010 05:37:16 +0000 Subject: [PATCH 1197/1626] phylib: Move workqueue initialization to a proper place commit 541cd3ee00a4fe975b22fac6a3bc846bacef37f7 ("phylib: Fix deadlock on resume") caused TI DaVinci EMAC ethernet driver to oops upon resume: PM: resume of devices complete after 237.098 msecs Restarting tasks ... done. kernel BUG at kernel/workqueue.c:354! Unable to handle kernel NULL pointer dereference at virtual address 00000000 [...] Backtrace: [] (__bug+0x0/0x2c) from [] (queue_delayed_work_on+0x74/0xf8) [] (queue_delayed_work_on+0x0/0xf8) from [] (queue_delayed_work+0x2c/0x30) The oops pops up because TI DaVinci EMAC driver detaches PHY on suspend and attaches it back on resume. Attaching makes phylib call phy_start_machine() that initializes a workqueue. On the other hand, PHY's resume routine will call phy_start_machine() again, and that will cause the oops since we just destroyed the already scheduled workqueue. This patch fixes the issue by moving workqueue initialization to phy_device_create(). p.s. We don't see this oops with ucc_geth and gianfar drivers because they perform a fine-grained suspend, i.e. they just stop the PHYs without detaching. Reported-by: Sekhar Nori Signed-off-by: Anton Vorontsov Tested-by: Sekhar Nori Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 4 +--- drivers/net/phy/phy_device.c | 1 + include/linux/phy.h | 1 + 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index b0e9f9c51721..0295097d6c44 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -410,7 +410,6 @@ EXPORT_SYMBOL(phy_start_aneg); static void phy_change(struct work_struct *work); -static void phy_state_machine(struct work_struct *work); /** * phy_start_machine - start PHY state machine tracking @@ -430,7 +429,6 @@ void phy_start_machine(struct phy_device *phydev, { phydev->adjust_state = handler; - INIT_DELAYED_WORK(&phydev->state_queue, phy_state_machine); schedule_delayed_work(&phydev->state_queue, HZ); } @@ -761,7 +759,7 @@ EXPORT_SYMBOL(phy_start); * phy_state_machine - Handle the state machine * @work: work_struct that describes the work to be done */ -static void phy_state_machine(struct work_struct *work) +void phy_state_machine(struct work_struct *work) { struct delayed_work *dwork = to_delayed_work(work); struct phy_device *phydev = diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 8212b2b93422..adbc0fded130 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -177,6 +177,7 @@ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id) dev->state = PHY_DOWN; mutex_init(&dev->lock); + INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine); return dev; } diff --git a/include/linux/phy.h b/include/linux/phy.h index 7968defd2fa7..6a7eb402165d 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -485,6 +485,7 @@ void phy_driver_unregister(struct phy_driver *drv); int phy_driver_register(struct phy_driver *new_driver); void phy_prepare_link(struct phy_device *phydev, void (*adjust_link)(struct net_device *)); +void phy_state_machine(struct work_struct *work); void phy_start_machine(struct phy_device *phydev, void (*handler)(struct net_device *)); void phy_stop_machine(struct phy_device *phydev); From 34692421bc7d6145ef383b014860f4fde10b7505 Mon Sep 17 00:00:00 2001 From: Jiajun Wu Date: Mon, 18 Jan 2010 05:47:50 +0000 Subject: [PATCH 1198/1626] ucc_geth: Fix full TX queue processing commit 7583605b6d29f1f7f6fc505b883328089f3485ad ("ucc_geth: Fix empty TX queue processing") fixed empty TX queue mishandling, but didn't account another corner case: when TX queue becomes full. Without this patch the driver will stop transmiting when TX queue becomes full since 'bd == ugeth->txBd[txQ]' actually checks for two things: queue empty or full. Let's better check for NULL skb, which unambiguously signals an empty queue. Signed-off-by: Jiajun Wu Signed-off-by: Anton Vorontsov Cc: Stable [2.6.32] Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 96bdc0b43889..eb8fe7e16c6c 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -3279,13 +3279,12 @@ static int ucc_geth_tx(struct net_device *dev, u8 txQ) /* Handle the transmitted buffer and release */ /* the BD to be used with the current frame */ - if (bd == ugeth->txBd[txQ]) /* queue empty? */ + skb = ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]]; + if (!skb) break; dev->stats.tx_packets++; - skb = ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]]; - if (skb_queue_len(&ugeth->rx_recycle) < RX_BD_RING_LEN && skb_recycle_check(skb, ugeth->ug_info->uf_info.max_rx_buf_length + From 357d46a17e54c9a87e0e6ef3930ff4ab2d232b81 Mon Sep 17 00:00:00 2001 From: Matthew Slattery Date: Mon, 18 Jan 2010 05:47:16 +0000 Subject: [PATCH 1199/1626] sfc: QT202x: Remove unreliable MMD check at initialisation Checking the PHY XS MMD here is unnecessary and can give false negatives. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/qt202x_phy.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index ff8f0a417fa3..e0d13a451019 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -318,12 +318,6 @@ static int qt202x_reset_phy(struct efx_nic *efx) /* Wait 250ms for the PHY to complete bootup */ msleep(250); - /* Check that all the MMDs we expect are present and responding. We - * expect faults on some if the link is down, but not on the PHY XS */ - rc = efx_mdio_check_mmds(efx, QT202X_REQUIRED_DEVS, MDIO_DEVS_PHYXS); - if (rc < 0) - goto fail; - falcon_board(efx)->type->init_phy(efx); return rc; From 98f672ca9978c6e5997dbe905c91a73593148a7e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 18 Jan 2010 21:14:12 +0000 Subject: [PATCH 1200/1626] bfin_mac: use the newer CLKBUFOE bit name via asm/dpmc.h This driver tweaks VR_CTL, so pull in the header for the bit defines. Also switch to the new define name as the old one has gone away. Signed-off-by: Mike Frysinger Signed-off-by: David S. Miller --- drivers/net/bfin_mac.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 8ffea3990d07..0b23bc4f56c6 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -33,6 +33,7 @@ #include #include +#include #include #include #include @@ -386,8 +387,8 @@ static int mii_probe(struct net_device *dev) u32 sclk, mdc_div; /* Enable PHY output early */ - if (!(bfin_read_VR_CTL() & PHYCLKOE)) - bfin_write_VR_CTL(bfin_read_VR_CTL() | PHYCLKOE); + if (!(bfin_read_VR_CTL() & CLKBUFOE)) + bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE); sclk = get_sclk(); mdc_div = ((sclk / MDC_CLK) / 2) - 1; From f06f135d8642e2f6812cfcb4ea8e4e9122d4d58c Mon Sep 17 00:00:00 2001 From: Thiago Farina Date: Tue, 19 Jan 2010 14:07:09 +0100 Subject: [PATCH 1201/1626] fs/bio.c: fix shadows sparse warning fs/bio.c:81:33: warning: symbol 'bslab' shadows an earlier one fs/bio.c:74:25: originally declared here Signed-off-by: Thiago Farina Signed-off-by: Jens Axboe --- fs/bio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bio.c b/fs/bio.c index 76e6713abf94..12429c9553eb 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -78,7 +78,7 @@ static struct kmem_cache *bio_find_or_create_slab(unsigned int extra_size) i = 0; while (i < bio_slab_nr) { - struct bio_slab *bslab = &bio_slabs[i]; + bslab = &bio_slabs[i]; if (!bslab->slab && entry == -1) entry = i; From 4feabefe53eb3742f0b2773a43200d1686f3a288 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 19 Jan 2010 15:38:44 +0100 Subject: [PATCH 1202/1626] ALSA: hda - Fix parsing pin node 0x21 on ALC259 ALC259 has a widget NID 0x21 for the output pin, but it wasn't handled properly in alc268_new_analog_output(). Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 3f92def752fd..79cdae324c5e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12541,6 +12541,7 @@ static int alc268_new_analog_output(struct alc_spec *spec, hda_nid_t nid, dac = 0x02; break; case 0x15: + case 0x21: dac = 0x03; break; default: From 3fb4a508b8e7957aa899f32cd6d9d462e102c7ca Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 19 Jan 2010 15:46:37 +0100 Subject: [PATCH 1203/1626] ALSA: hda - Turn on EAPD only if available for Realtek codecs Some codecs disable widgets used for output pins and reserve as vendor- spec widgets. Thus we need to check the widget type and pin cap before actually sending SET_EAPD verbs in the auto-configuration mode. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 79cdae324c5e..6ae610c0111e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1093,6 +1093,16 @@ static void alc889_coef_init(struct hda_codec *codec) snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_PROC_COEF, tmp|0x2010); } +/* turn on/off EAPD control (only if available) */ +static void set_eapd(struct hda_codec *codec, hda_nid_t nid, int on) +{ + if (get_wcaps_type(get_wcaps(codec, nid)) != AC_WID_PIN) + return; + if (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD) + snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_EAPD_BTLENABLE, + on ? 2 : 0); +} + static void alc_auto_init_amp(struct hda_codec *codec, int type) { unsigned int tmp; @@ -1110,25 +1120,22 @@ static void alc_auto_init_amp(struct hda_codec *codec, int type) case ALC_INIT_DEFAULT: switch (codec->vendor_id) { case 0x10ec0260: - snd_hda_codec_write(codec, 0x0f, 0, - AC_VERB_SET_EAPD_BTLENABLE, 2); - snd_hda_codec_write(codec, 0x10, 0, - AC_VERB_SET_EAPD_BTLENABLE, 2); + set_eapd(codec, 0x0f, 1); + set_eapd(codec, 0x10, 1); break; case 0x10ec0262: case 0x10ec0267: case 0x10ec0268: case 0x10ec0269: + case 0x10ec0270: case 0x10ec0272: case 0x10ec0660: case 0x10ec0662: case 0x10ec0663: case 0x10ec0862: case 0x10ec0889: - snd_hda_codec_write(codec, 0x14, 0, - AC_VERB_SET_EAPD_BTLENABLE, 2); - snd_hda_codec_write(codec, 0x15, 0, - AC_VERB_SET_EAPD_BTLENABLE, 2); + set_eapd(codec, 0x14, 1); + set_eapd(codec, 0x15, 1); break; } switch (codec->vendor_id) { @@ -1836,10 +1843,8 @@ static void alc889_acer_aspire_8930g_setup(struct hda_codec *codec) #ifdef CONFIG_SND_HDA_POWER_SAVE static void alc889_power_eapd(struct hda_codec *codec, int power) { - snd_hda_codec_write(codec, 0x14, 0, - AC_VERB_SET_EAPD_BTLENABLE, power ? 2 : 0); - snd_hda_codec_write(codec, 0x15, 0, - AC_VERB_SET_EAPD_BTLENABLE, power ? 2 : 0); + set_eapd(codec, 0x14, power); + set_eapd(codec, 0x15, power); } #endif From 135d01899b1fba17045961febff7e5141db6048f Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 19 Jan 2010 19:06:59 +0100 Subject: [PATCH 1204/1626] netfilter: nf_conntrack_sip: fix off-by-one in compact header parsing In a string like "v:SIP/2.0..." it was checking for !isalpha('S') when it meant to be inspecting the ':'. Patch by Greg Alexander Signed-off-by: Patrick McHardy --- net/netfilter/nf_conntrack_sip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 4b572163784b..023966b569bf 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -376,7 +376,7 @@ int ct_sip_get_header(const struct nf_conn *ct, const char *dptr, dptr += hdr->len; else if (hdr->cname && limit - dptr >= hdr->clen + 1 && strnicmp(dptr, hdr->cname, hdr->clen) == 0 && - !isalpha(*(dptr + hdr->clen + 1))) + !isalpha(*(dptr + hdr->clen))) dptr += hdr->clen; else continue; From 200b7a8dc09504bc0aedac567a307a6e533f39e5 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 19 Jan 2010 16:40:07 +0100 Subject: [PATCH 1205/1626] ARM: 5884/1: arm: Fix DCC console for v7 Without this patch arch/arm/compressed/head.S defaults to generic DCC code that does not work for v7. For more information on the v7 DCC, see Cortex-A8 TRM "12.11.1 Debug communications channel". To use it with post 2.6.33-rc1 or later, you need to have: CONFIG_DEBUG_LL=y ONFIG_DEBUG_ICEDCC=y CONFIG_EARLY_PRINTK=y Earlier kernels need commit 93fd03a8c6728b58879f8af20ffd55d9c32a778b backported. Tested on omap3430. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 8 ++++++++ arch/arm/boot/compressed/misc.c | 12 ++++++++++++ arch/arm/kernel/debug.S | 20 ++++++++++++++++++++ 3 files changed, 40 insertions(+) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index d356af7cef82..4fddc509e78e 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -27,6 +27,14 @@ .macro writeb, ch, rb mcr p14, 0, \ch, c0, c5, 0 .endm +#elif defined(CONFIG_CPU_V7) + .macro loadsp, rb + .endm + .macro writeb, ch, rb +wait: mrc p14, 0, pc, c0, c1, 0 + bcs wait + mcr p14, 0, \ch, c0, c5, 0 + .endm #elif defined(CONFIG_CPU_XSCALE) .macro loadsp, rb .endm diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index af6479fae931..56a0d116d271 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -53,6 +53,18 @@ static void icedcc_putc(int ch) asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch)); } + +#elif defined(CONFIG_CPU_V7) + +static void icedcc_putc(int ch) +{ + asm( + "wait: mrc p14, 0, pc, c0, c1, 0 \n\ + bcs wait \n\ + mcr p14, 0, %0, c0, c5, 0 " + : : "r" (ch)); +} + #elif defined(CONFIG_CPU_XSCALE) static void icedcc_putc(int ch) diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index b121b6053cce..5c91addcaebc 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -49,6 +49,26 @@ 1002: .endm +#elif defined(CONFIG_CPU_V7) + + .macro addruart, rx + .endm + + .macro senduart, rd, rx + mcr p14, 0, \rd, c0, c5, 0 + .endm + + .macro busyuart, rd, rx +busy: mrc p14, 0, pc, c0, c1, 0 + bcs busy + .endm + + .macro waituart, rd, rx +wait: mrc p14, 0, pc, c0, c1, 0 + bcs wait + + .endm + #elif defined(CONFIG_CPU_XSCALE) .macro addruart, rx From ad3e6c0b1fad31282a8384903ed811671d840a9c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 19 Jan 2010 16:42:12 +0100 Subject: [PATCH 1206/1626] ARM: 5885/1: arm: Flush TLB entries in setup_mm_for_reboot() We need to do that if we tinker with the MMU entries. This fixes the occasional bug with kexec where the new fails to uncompress with "crc error". Most likely at least kexec on v6 and v7 need this fix. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 1708da82da96..761ffede6a23 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -1067,4 +1067,6 @@ void setup_mm_for_reboot(char mode) pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1))); flush_pmd_entry(pmd); } + + local_flush_tlb_all(); } From 1f667c690be3ab71036c436d8391105eee23f65b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 19 Jan 2010 17:01:33 +0100 Subject: [PATCH 1207/1626] ARM: 5886/1: arm: Fix cpu_proc_fin() for proc-v7.S and make kexec work The comments in arm_machine_restart() suggest that cpu_proc_fin() will clean and disable cache and turn off interrupts. This does not seem to be implemented for proc-v7.S, implement it the same way as for proc-v6.S. This also makes kexec work for v7. Note that a related TLB and branch traget flush patch is also needed to avoid kexec "crc error". Note that there are still some issues that seem to be related to L2 cache being on and causing occasional uncompress "crc error" with kexec. Anyways, this gets kexec mostly working on V7 for now. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mm/proc-v7.S | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 3a285218fd15..d2a80747c6fe 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -45,7 +45,14 @@ ENTRY(cpu_v7_proc_init) ENDPROC(cpu_v7_proc_init) ENTRY(cpu_v7_proc_fin) - mov pc, lr + stmfd sp!, {lr} + cpsid if @ disable interrupts + bl v7_flush_kern_cache_all + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x1000 @ ...i............ + bic r0, r0, #0x0006 @ .............ca. + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ldmfd sp!, {pc} ENDPROC(cpu_v7_proc_fin) /* From 2d146eb172d5f754e3973a3f761f7619ebb12df9 Mon Sep 17 00:00:00 2001 From: Ram Vepa Date: Tue, 19 Jan 2010 12:36:20 -0800 Subject: [PATCH 1208/1626] S2io: two branches the same in wait_for_cmd_complete() Fix check to verify if a register bit is set. We have not hit this bug because wait_for_cmd_complete() is always called with S2IO_BIT_RESET. Reported by Roel Kluin . Signed-off-by: Ram Vepa Signed-off-by: David S. Miller --- drivers/net/s2io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index cc4218667cba..3c4836d0898f 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3421,7 +3421,7 @@ static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit, break; } } else { - if (!(val64 & busy_bit)) { + if (val64 & busy_bit) { ret = SUCCESS; break; } From e605d554ec17be55741b066387ae9f341777f52c Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Thu, 7 Jan 2010 03:35:49 +0100 Subject: [PATCH 1209/1626] [WATCHDOG] ixp2000: Fix build failure caused by missing include This patch fixes a build failure[1] caused by the missing include of timer.h and thus fixes the build failure. Notably the build failure existed since October 2009! [2] References: [1] http://kisskb.ellerman.id.au/kisskb/buildresult/1983339/ [2] http://kisskb.ellerman.id.au/kisskb/buildresult/1351737/ Signed-off-by: Peter Huewe Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ixp2000_wdt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/watchdog/ixp2000_wdt.c b/drivers/watchdog/ixp2000_wdt.c index 4f4b35a20d84..3c79dc587958 100644 --- a/drivers/watchdog/ixp2000_wdt.c +++ b/drivers/watchdog/ixp2000_wdt.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include From b4ced2b768ab6c580148d1163c82a655fe147edc Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 19 Jan 2010 14:12:20 -0800 Subject: [PATCH 1210/1626] netlink: With opcode INET_DIAG_BC_S_LE dport was compared in inet_diag_bc_run() The s-port should be compared. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- net/ipv4/inet_diag.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index bdb78dd180ce..1aaa8110d84b 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -368,7 +368,7 @@ static int inet_diag_bc_run(const void *bc, int len, yes = entry->sport >= op[1].no; break; case INET_DIAG_BC_S_LE: - yes = entry->dport <= op[1].no; + yes = entry->sport <= op[1].no; break; case INET_DIAG_BC_D_GE: yes = entry->dport >= op[1].no; From 74401773f80b6d42f7a4c6994ca0cca883b03745 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 19 Jan 2010 20:51:32 +0100 Subject: [PATCH 1211/1626] ath9k: fix beacon slot/buffer leak When cleaning up beacon buffers and slots, ath9k currently checks if sc->ah->opmode is set to a beacon related mode before cleaning up buffers. An unfortunate ordering of interface up/down commands can lead to sc->ah->opmode being set to monitor mode, while there are AP interfaces present on the same wiphy. Always cleaning up beacon buffers if present fixes this issue. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 996eb90263cc..643bea35686f 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2655,10 +2655,10 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) { ath9k_ps_wakeup(sc); ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); - ath_beacon_return(sc, avp); ath9k_ps_restore(sc); } + ath_beacon_return(sc, avp); sc->sc_flags &= ~SC_OP_BEACONS; for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) { From 2045124ffd1a5e46d157349016a2c50f19c8c91d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 19 Jan 2010 23:42:08 +0100 Subject: [PATCH 1212/1626] ARM: 5888/1: arm: Update comments in cacheflush.h and remove unnecessary V6 and V7 comments The comments in cacheflush.h should follow what's in struct cpu_cache_fns. The comments for V6 and V7 are unnecessary. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/include/asm/cacheflush.h | 20 +++++++++++++++++--- arch/arm/mm/proc-v6.S | 2 -- arch/arm/mm/proc-v7.S | 2 -- 3 files changed, 17 insertions(+), 7 deletions(-) diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 730aefcfbee3..c77d2fa1f6e5 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -154,16 +154,16 @@ * Please note that the implementation of these, and the required * effects are cache-type (VIVT/VIPT/PIPT) specific. * - * flush_cache_kern_all() + * flush_kern_all() * * Unconditionally clean and invalidate the entire cache. * - * flush_cache_user_mm(mm) + * flush_user_all() * * Clean and invalidate all user space cache entries * before a change of page tables. * - * flush_cache_user_range(start, end, flags) + * flush_user_range(start, end, flags) * * Clean and invalidate a range of cache entries in the * specified address space before a change of page tables. @@ -179,6 +179,20 @@ * - start - virtual start address * - end - virtual end address * + * coherent_user_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * - start - virtual start address + * - end - virtual end address + * + * flush_kern_dcache_area(kaddr, size) + * + * Ensure that the data held in page is written back. + * - kaddr - page address + * - size - region size + * * DMA Cache Coherency * =================== * diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 395cc90c6613..7a5337ed7d68 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -59,8 +59,6 @@ ENTRY(cpu_v6_proc_fin) * to what would be the reset vector. * * - loc - location to jump to for soft reset - * - * It is assumed that: */ .align 5 ENTRY(cpu_v6_reset) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index d2a80747c6fe..7aaf88a3b7aa 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -63,8 +63,6 @@ ENDPROC(cpu_v7_proc_fin) * to what would be the reset vector. * * - loc - location to jump to for soft reset - * - * It is assumed that: */ .align 5 ENTRY(cpu_v7_reset) From 883edfdd58419b0cc298db14ba25c26d55c6d1af Mon Sep 17 00:00:00 2001 From: Thara Gopinath Date: Tue, 19 Jan 2010 17:30:51 -0700 Subject: [PATCH 1213/1626] OMAP3: hwmod: Adding flag to prevent caching of sysconfig register. In the current implementation the sysconfig value is read into _sysc_cache once and an actual update to the sysconfig register happens only if the new value paased is differnt from the one in _sysc_cache. _sysc_cache is updated only if _HWMOD_SYSCONFIG_LOADED is not set. This can lead to the follwing issue if off mode is enabled in modules which employs "always-retore" mechanism of context save and restore. a. The module sets the sysconfig register through omap_device_enable. Here _sysc_cache is updated with the value written to the sysconfig register and left. b. The power domain containig the module enters off mode and the module context is lost. c. The module in use becomes active and calls omap_device_enable to enable itself. Here a read of sysconfig register does not happen as _HWMOD_SYSCONFIG_LOADED flag is set. The value to be written to the sysconfig register will be same as the one written in step a. Since _sysc_cache reflects the previous written value an update of the sysconfig register does not happen. This means in modules which employs "always-restore" mechanism after off , the sysconfig regsiters will never get updated. This patch introduces a flag SYSC_NO_CACHE which if set ensures that the sysconfig register is always read into _sysc_cache before an update is attempted. This flags need to be set only by modules which does not do a context save but re-initializes the registers every time the module is accessed. This includes modules like i2c, smartreflex etc. Signed-off-by: Thara Gopinath [paul@pwsan.com: tweaked to apply on a different head, added flag comment] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 3 ++- arch/arm/plat-omap/include/plat/omap_hwmod.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d8c8545875b1..478ae585ca39 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -94,7 +94,8 @@ static int _update_sysc_cache(struct omap_hwmod *oh) oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs); - oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED; + if (!(oh->sysconfig->sysc_flags & SYSC_NO_CACHE)) + oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED; return 0; } diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 007935a921ea..33933256a226 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -227,6 +227,7 @@ struct omap_hwmod_ocp_if { #define SYSC_HAS_SIDLEMODE (1 << 5) #define SYSC_HAS_MIDLEMODE (1 << 6) #define SYSS_MISSING (1 << 7) +#define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */ /* omap_hwmod_sysconfig.clockact flags */ #define CLOCKACT_TEST_BOTH 0x0 From 6468e3b18777ecfffa6738e365896be9f17403f2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 19 Jan 2010 17:30:52 -0700 Subject: [PATCH 1214/1626] OMAP3: clock: Remove unnecessarily .init initializers from OMAP3 clocks The first thing that omap2_init_clksel_parent() does is check for a non-zero .clksel field in the struct clk. Therefore, it is pointless calling this function on clocks where the clksel field is unset. Remove init calls to omap2_init_clksel_parent() on clocks without a clksel field. Signed-off-by: Russell King Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock34xx_data.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c index c6031d74d6f6..74930e3158e3 100644 --- a/arch/arm/mach-omap2/clock34xx_data.c +++ b/arch/arm/mach-omap2/clock34xx_data.c @@ -671,7 +671,6 @@ static struct clk dpll4_m3x2_ck = { .name = "dpll4_m3x2_ck", .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m3_ck, - .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_TV_SHIFT, .flags = INVERT_ENABLE, @@ -811,7 +810,6 @@ static struct clk dpll4_m6x2_ck = { .name = "dpll4_m6x2_ck", .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m6_ck, - .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT, .flags = INVERT_ENABLE, @@ -1047,7 +1045,6 @@ static struct clk iva2_ck = { .name = "iva2_ck", .ops = &clkops_omap2_dflt_wait, .parent = &dpll2_m2_ck, - .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN), .enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, .clkdm_name = "iva2_clkdm", @@ -1121,7 +1118,6 @@ static struct clk gfx_l3_ck = { .name = "gfx_l3_ck", .ops = &clkops_omap2_dflt_wait, .parent = &l3_ick, - .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), .enable_bit = OMAP_EN_GFX_SHIFT, .recalc = &followparent_recalc, From 2cb0c54f3a696351b81e6670f8419120c94b5e0b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 19 Jan 2010 18:17:07 -0800 Subject: [PATCH 1215/1626] omap: Fix cmdline muxing Looks like cmdline muxing got broken at some point when we decided to limit muxing to __init code. Currently omap_mux_entry list is not yet initialized when we try to initialize cmdline muxing. Fix this by calling omap_mux_init_list() before calling omap_mux_set_cmdline_signals(). Reported-by: Philip Balister Tested-by: Philip Balister Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 459ef23ab8a8..40ea9fd4211d 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -998,12 +998,15 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size, omap_mux_package_fixup(package_subset, superset); if (package_balls) omap_mux_package_init_balls(package_balls, superset); - omap_mux_set_cmdline_signals(); - omap_mux_set_board_signals(board_mux); #endif omap_mux_init_list(superset); +#ifdef CONFIG_OMAP_MUX + omap_mux_set_cmdline_signals(); + omap_mux_set_board_signals(board_mux); +#endif + return 0; } From d4bb72e50a0c4b6790dec127a38fd06d06e561cc Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 19 Jan 2010 15:15:24 -0800 Subject: [PATCH 1216/1626] omap: Fix functions for dynamic remuxing of pins Make the omap_mux_read and write available for board code, and rename omap_mux_set_board_signals into omap_mux_write_array. Also add the related prototypes and comments into mux.h. In some cases we want to change the signals dynamically, mostly for power management. Note that we cannot use the signal names as they are set __init to save memory. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.c | 22 +++++++++++----------- arch/arm/mach-omap2/mux.h | 24 ++++++++++++++++++++++++ 2 files changed, 35 insertions(+), 11 deletions(-) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 40ea9fd4211d..3f59bd12cbbf 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -51,7 +51,7 @@ struct omap_mux_entry { static unsigned long mux_phys; static void __iomem *mux_base; -static inline u16 omap_mux_read(u16 reg) +u16 omap_mux_read(u16 reg) { if (cpu_is_omap24xx()) return __raw_readb(mux_base + reg); @@ -59,7 +59,7 @@ static inline u16 omap_mux_read(u16 reg) return __raw_readw(mux_base + reg); } -static inline void omap_mux_write(u16 val, u16 reg) +void omap_mux_write(u16 val, u16 reg) { if (cpu_is_omap24xx()) __raw_writeb(val, mux_base + reg); @@ -67,6 +67,14 @@ static inline void omap_mux_write(u16 val, u16 reg) __raw_writew(val, mux_base + reg); } +void omap_mux_write_array(struct omap_board_mux *board_mux) +{ + while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) { + omap_mux_write(board_mux->value, board_mux->reg_offset); + board_mux++; + } +} + #if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX) static struct omap_mux_cfg arch_mux_cfg; @@ -833,14 +841,6 @@ static void __init omap_mux_set_cmdline_signals(void) kfree(options); } -static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux) -{ - while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) { - omap_mux_write(board_mux->value, board_mux->reg_offset); - board_mux++; - } -} - static int __init omap_mux_copy_names(struct omap_mux *src, struct omap_mux *dst) { @@ -1004,7 +1004,7 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size, #ifdef CONFIG_OMAP_MUX omap_mux_set_cmdline_signals(); - omap_mux_set_board_signals(board_mux); + omap_mux_write_array(board_mux); #endif return 0; diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index d8b4d5ad2278..f8c2e7a8f063 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -146,6 +146,30 @@ u16 omap_mux_get_gpio(int gpio); */ void omap_mux_set_gpio(u16 val, int gpio); +/** + * omap_mux_read() - read mux register + * @mux_offset: Offset of the mux register + * + */ +u16 omap_mux_read(u16 mux_offset); + +/** + * omap_mux_write() - write mux register + * @val: New mux register value + * @mux_offset: Offset of the mux register + * + * This should be only needed for dynamic remuxing of non-gpio signals. + */ +void omap_mux_write(u16 val, u16 mux_offset); + +/** + * omap_mux_write_array() - write an array of mux registers + * @board_mux: Array of mux registers terminated by MAP_MUX_TERMINATOR + * + * This should be only needed for dynamic remuxing of non-gpio signals. + */ +void omap_mux_write_array(struct omap_board_mux *board_mux); + /** * omap3_mux_init() - initialize mux system with board specific set * @board_mux: Board specific mux table From e9acb9b64d7fb16c7f69efa85c5707cffd0c7275 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 19 Jan 2010 15:40:26 -0800 Subject: [PATCH 1217/1626] omap3: Fix cpu detection We need to set the omap_chip.oc carefully for the clocks to work. To fix this, set the omap_chip.oc in omap3_check_features() based on the CONTROL_IDCODE and silicon revision registers. Also add handling for 34xx es3.1.2 as es3.1 for now. Fixes booting on at least overo board. Based on an earlier patch by Paul Walmsley . Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 41 +++++++++++++++------------ arch/arm/plat-omap/include/plat/cpu.h | 1 + 2 files changed, 24 insertions(+), 18 deletions(-) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index a091b53657b9..3d65c50bd017 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -188,6 +188,8 @@ void __init omap3_check_revision(void) u16 hawkeye; u8 rev; + omap_chip.oc = CHIP_IS_OMAP3430; + /* * We cannot access revision registers on ES1.0. * If the processor type is Cortex-A8 and the revision is 0x0 @@ -196,6 +198,7 @@ void __init omap3_check_revision(void) cpuid = read_cpuid(CPUID_ID); if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) { omap_revision = OMAP3430_REV_ES1_0; + omap_chip.oc |= CHIP_IS_OMAP3430ES1; return; } @@ -216,18 +219,28 @@ void __init omap3_check_revision(void) case 0: /* Take care of early samples */ case 1: omap_revision = OMAP3430_REV_ES2_0; + omap_chip.oc |= CHIP_IS_OMAP3430ES2; break; case 2: omap_revision = OMAP3430_REV_ES2_1; + omap_chip.oc |= CHIP_IS_OMAP3430ES2; break; case 3: omap_revision = OMAP3430_REV_ES3_0; + omap_chip.oc |= CHIP_IS_OMAP3430ES3_0; break; case 4: + omap_revision = OMAP3430_REV_ES3_1; + omap_chip.oc |= CHIP_IS_OMAP3430ES3_1; + break; + case 7: /* FALLTHROUGH */ default: /* Use the latest known revision as default */ - omap_revision = OMAP3430_REV_ES3_1; + omap_revision = OMAP3430_REV_ES3_1_2; + + /* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */ + omap_chip.oc |= CHIP_IS_OMAP3430ES3_1; } break; case 0xb868: @@ -235,14 +248,18 @@ void __init omap3_check_revision(void) * * Set the device to be OMAP3505 here. Actual device * is identified later based on the features. + * + * REVISIT: AM3505/AM3517 should have their own CHIP_IS */ omap_revision = OMAP3505_REV(rev); + omap_chip.oc |= CHIP_IS_OMAP3430ES3_1; break; case 0xb891: /* FALLTHROUGH */ default: /* Unknown default to latest silicon rev as default*/ omap_revision = OMAP3630_REV_ES1_0; + omap_chip.oc |= CHIP_IS_OMAP3630ES1; } } @@ -360,6 +377,7 @@ void __init omap2_check_revision(void) omap3_check_revision(); omap3_check_features(); omap3_cpuinfo(); + return; } else if (cpu_is_omap44xx()) { omap4_check_revision(); return; @@ -374,27 +392,14 @@ void __init omap2_check_revision(void) if (cpu_is_omap243x()) { /* Currently only supports 2430ES2.1 and 2430-all */ omap_chip.oc |= CHIP_IS_OMAP2430; + return; } else if (cpu_is_omap242x()) { /* Currently only supports 2420ES2.1.1 and 2420-all */ omap_chip.oc |= CHIP_IS_OMAP2420; - } else if (cpu_is_omap3505() || cpu_is_omap3517()) { - omap_chip.oc = CHIP_IS_OMAP3430 | CHIP_IS_OMAP3430ES3_1; - } else if (cpu_is_omap343x()) { - omap_chip.oc = CHIP_IS_OMAP3430; - if (omap_rev() == OMAP3430_REV_ES1_0) - omap_chip.oc |= CHIP_IS_OMAP3430ES1; - else if (omap_rev() >= OMAP3430_REV_ES2_0 && - omap_rev() <= OMAP3430_REV_ES2_1) - omap_chip.oc |= CHIP_IS_OMAP3430ES2; - else if (omap_rev() == OMAP3430_REV_ES3_0) - omap_chip.oc |= CHIP_IS_OMAP3430ES3_0; - else if (omap_rev() == OMAP3430_REV_ES3_1) - omap_chip.oc |= CHIP_IS_OMAP3430ES3_1; - else if (omap_rev() == OMAP3630_REV_ES1_0) - omap_chip.oc |= CHIP_IS_OMAP3630ES1; - } else { - pr_err("Uninitialized omap_chip, please fix!\n"); + return; } + + pr_err("Uninitialized omap_chip, please fix!\n"); } /* diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 9a028bdebb06..a162f585b1e3 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -434,6 +434,7 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3430_REV_ES2_1 0x34302034 #define OMAP3430_REV_ES3_0 0x34303034 #define OMAP3430_REV_ES3_1 0x34304034 +#define OMAP3430_REV_ES3_1_2 0x34305034 #define OMAP3630_REV_ES1_0 0x36300034 From 247421fda7a9612f03150aacb90fdad55e9f63d2 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 13 Jan 2010 18:10:29 -0800 Subject: [PATCH 1218/1626] OMAP: dma_chan[lch_head].flag & OMAP_DMA_ACTIVE tested twice in omap_dma_unlink_lch() The same flag and bits were tested twice. Signed-off-by: Roel Kluin Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 09d82b3c66ce..728c64204184 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1183,7 +1183,7 @@ void omap_dma_unlink_lch(int lch_head, int lch_queue) } if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) || - (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) { + (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) { printk(KERN_ERR "omap_dma: You need to stop the DMA channels " "before unlinking\n"); dump_stack(); From 5f3ef64f4da1c587cdcfaaac72311225b7df094c Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Wed, 14 Oct 2009 16:18:27 -0500 Subject: [PATCH 1219/1626] eCryptfs: Use notify_change for truncating lower inodes When truncating inodes in the lower filesystem, eCryptfs directly invoked vmtruncate(). As Christoph Hellwig pointed out, vmtruncate() is a filesystem helper function, but filesystems may need to do more than just a call to vmtruncate(). This patch moves the lower inode truncation out of ecryptfs_truncate() and renames the function to truncate_upper(). truncate_upper() updates an iattr for the lower inode to indicate if the lower inode needs to be truncated upon return. ecryptfs_setattr() then calls notify_change(), using the updated iattr for the lower inode, to complete the truncation. For eCryptfs functions needing to truncate, ecryptfs_truncate() is reintroduced as a simple way to truncate the upper inode to a specified size and then truncate the lower inode accordingly. https://bugs.launchpad.net/bugs/451368 Reported-by: Christoph Hellwig Acked-by: Dustin Kirkland Cc: ecryptfs-devel@lists.launchpad.net Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Tyler Hicks --- fs/ecryptfs/inode.c | 99 ++++++++++++++++++++++++++++++--------------- 1 file changed, 67 insertions(+), 32 deletions(-) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 7f8545032930..2b449d79b7fa 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -772,18 +772,23 @@ upper_size_to_lower_size(struct ecryptfs_crypt_stat *crypt_stat, } /** - * ecryptfs_truncate + * truncate_upper * @dentry: The ecryptfs layer dentry - * @new_length: The length to expand the file to + * @ia: Address of the ecryptfs inode's attributes + * @lower_ia: Address of the lower inode's attributes * * Function to handle truncations modifying the size of the file. Note * that the file sizes are interpolated. When expanding, we are simply - * writing strings of 0's out. When truncating, we need to modify the - * underlying file size according to the page index interpolations. + * writing strings of 0's out. When truncating, we truncate the upper + * inode and update the lower_ia according to the page index + * interpolations. If ATTR_SIZE is set in lower_ia->ia_valid upon return, + * the caller must use lower_ia in a call to notify_change() to perform + * the truncation of the lower inode. * * Returns zero on success; non-zero otherwise */ -int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) +static int truncate_upper(struct dentry *dentry, struct iattr *ia, + struct iattr *lower_ia) { int rc = 0; struct inode *inode = dentry->d_inode; @@ -794,8 +799,10 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) loff_t lower_size_before_truncate; loff_t lower_size_after_truncate; - if (unlikely((new_length == i_size))) + if (unlikely((ia->ia_size == i_size))) { + lower_ia->ia_valid &= ~ATTR_SIZE; goto out; + } crypt_stat = &ecryptfs_inode_to_private(dentry->d_inode)->crypt_stat; /* Set up a fake ecryptfs file, this is used to interface with * the file in the underlying filesystem so that the @@ -815,28 +822,30 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) &fake_ecryptfs_file, ecryptfs_inode_to_private(dentry->d_inode)->lower_file); /* Switch on growing or shrinking file */ - if (new_length > i_size) { + if (ia->ia_size > i_size) { char zero[] = { 0x00 }; + lower_ia->ia_valid &= ~ATTR_SIZE; /* Write a single 0 at the last position of the file; * this triggers code that will fill in 0's throughout * the intermediate portion of the previous end of the * file and the new and of the file */ rc = ecryptfs_write(&fake_ecryptfs_file, zero, - (new_length - 1), 1); - } else { /* new_length < i_size_read(inode) */ - /* We're chopping off all the pages down do the page - * in which new_length is located. Fill in the end of - * that page from (new_length & ~PAGE_CACHE_MASK) to + (ia->ia_size - 1), 1); + } else { /* ia->ia_size < i_size_read(inode) */ + /* We're chopping off all the pages down to the page + * in which ia->ia_size is located. Fill in the end of + * that page from (ia->ia_size & ~PAGE_CACHE_MASK) to * PAGE_CACHE_SIZE with zeros. */ size_t num_zeros = (PAGE_CACHE_SIZE - - (new_length & ~PAGE_CACHE_MASK)); + - (ia->ia_size & ~PAGE_CACHE_MASK)); if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) { - rc = vmtruncate(inode, new_length); + rc = vmtruncate(inode, ia->ia_size); if (rc) goto out_free; - rc = vmtruncate(lower_dentry->d_inode, new_length); + lower_ia->ia_size = ia->ia_size; + lower_ia->ia_valid |= ATTR_SIZE; goto out_free; } if (num_zeros) { @@ -848,7 +857,7 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) goto out_free; } rc = ecryptfs_write(&fake_ecryptfs_file, zeros_virt, - new_length, num_zeros); + ia->ia_size, num_zeros); kfree(zeros_virt); if (rc) { printk(KERN_ERR "Error attempting to zero out " @@ -857,7 +866,7 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) goto out_free; } } - vmtruncate(inode, new_length); + vmtruncate(inode, ia->ia_size); rc = ecryptfs_write_inode_size_to_metadata(inode); if (rc) { printk(KERN_ERR "Problem with " @@ -870,10 +879,12 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) lower_size_before_truncate = upper_size_to_lower_size(crypt_stat, i_size); lower_size_after_truncate = - upper_size_to_lower_size(crypt_stat, new_length); - if (lower_size_after_truncate < lower_size_before_truncate) - vmtruncate(lower_dentry->d_inode, - lower_size_after_truncate); + upper_size_to_lower_size(crypt_stat, ia->ia_size); + if (lower_size_after_truncate < lower_size_before_truncate) { + lower_ia->ia_size = lower_size_after_truncate; + lower_ia->ia_valid |= ATTR_SIZE; + } else + lower_ia->ia_valid &= ~ATTR_SIZE; } out_free: if (ecryptfs_file_to_private(&fake_ecryptfs_file)) @@ -883,6 +894,33 @@ out: return rc; } +/** + * ecryptfs_truncate + * @dentry: The ecryptfs layer dentry + * @new_length: The length to expand the file to + * + * Simple function that handles the truncation of an eCryptfs inode and + * its corresponding lower inode. + * + * Returns zero on success; non-zero otherwise + */ +int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) +{ + struct iattr ia = { .ia_valid = ATTR_SIZE, .ia_size = new_length }; + struct iattr lower_ia = { .ia_valid = 0 }; + int rc; + + rc = truncate_upper(dentry, &ia, &lower_ia); + if (!rc && lower_ia.ia_valid & ATTR_SIZE) { + struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry); + + mutex_lock(&lower_dentry->d_inode->i_mutex); + rc = notify_change(lower_dentry, &lower_ia); + mutex_unlock(&lower_dentry->d_inode->i_mutex); + } + return rc; +} + static int ecryptfs_permission(struct inode *inode, int mask) { @@ -905,6 +943,7 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia) { int rc = 0; struct dentry *lower_dentry; + struct iattr lower_ia; struct inode *inode; struct inode *lower_inode; struct ecryptfs_crypt_stat *crypt_stat; @@ -943,15 +982,11 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia) } } mutex_unlock(&crypt_stat->cs_mutex); + memcpy(&lower_ia, ia, sizeof(lower_ia)); + if (ia->ia_valid & ATTR_FILE) + lower_ia.ia_file = ecryptfs_file_to_lower(ia->ia_file); if (ia->ia_valid & ATTR_SIZE) { - ecryptfs_printk(KERN_DEBUG, - "ia->ia_valid = [0x%x] ATTR_SIZE" " = [0x%x]\n", - ia->ia_valid, ATTR_SIZE); - rc = ecryptfs_truncate(dentry, ia->ia_size); - /* ecryptfs_truncate handles resizing of the lower file */ - ia->ia_valid &= ~ATTR_SIZE; - ecryptfs_printk(KERN_DEBUG, "ia->ia_valid = [%x]\n", - ia->ia_valid); + rc = truncate_upper(dentry, ia, &lower_ia); if (rc < 0) goto out; } @@ -960,11 +995,11 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia) * mode change is for clearing setuid/setgid bits. Allow lower fs * to interpret this in its own way. */ - if (ia->ia_valid & (ATTR_KILL_SUID | ATTR_KILL_SGID)) - ia->ia_valid &= ~ATTR_MODE; + if (lower_ia.ia_valid & (ATTR_KILL_SUID | ATTR_KILL_SGID)) + lower_ia.ia_valid &= ~ATTR_MODE; mutex_lock(&lower_dentry->d_inode->i_mutex); - rc = notify_change(lower_dentry, ia); + rc = notify_change(lower_dentry, &lower_ia); mutex_unlock(&lower_dentry->d_inode->i_mutex); out: fsstack_copy_attr_all(inode, lower_inode); From f8f484d1b6677dd5cd5e7e605db747e8c30bbd47 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Wed, 4 Nov 2009 02:48:01 -0600 Subject: [PATCH 1220/1626] eCryptfs: Add getattr function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The i_blocks field of an eCryptfs inode cannot be trusted, but generic_fillattr() uses it to instantiate the blocks field of a stat() syscall when a filesystem doesn't implement its own getattr(). Users have noticed that the output of du is incorrect on newly created files. This patch creates ecryptfs_getattr() which calls into the lower filesystem's getattr() so that eCryptfs can use its kstat.blocks value after calling generic_fillattr(). It is important to note that the block count includes the eCryptfs metadata stored in the beginning of the lower file plus any padding used to fill an extent before encryption. https://bugs.launchpad.net/ecryptfs/+bug/390833 Reported-by: Dominic Sacré Signed-off-by: Tyler Hicks --- fs/ecryptfs/inode.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 2b449d79b7fa..5726d7adaf5b 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -1006,6 +1006,21 @@ out: return rc; } +int ecryptfs_getattr(struct vfsmount *mnt, struct dentry *dentry, + struct kstat *stat) +{ + struct kstat lower_stat; + int rc; + + rc = vfs_getattr(ecryptfs_dentry_to_lower_mnt(dentry), + ecryptfs_dentry_to_lower(dentry), &lower_stat); + if (!rc) { + generic_fillattr(dentry->d_inode, stat); + stat->blocks = lower_stat.blocks; + } + return rc; +} + int ecryptfs_setxattr(struct dentry *dentry, const char *name, const void *value, size_t size, int flags) @@ -1135,6 +1150,7 @@ const struct inode_operations ecryptfs_dir_iops = { const struct inode_operations ecryptfs_main_iops = { .permission = ecryptfs_permission, .setattr = ecryptfs_setattr, + .getattr = ecryptfs_getattr, .setxattr = ecryptfs_setxattr, .getxattr = ecryptfs_getxattr, .listxattr = ecryptfs_listxattr, From 38e3eaeedcac75360af8a92e7b66956ec4f334e5 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Tue, 3 Nov 2009 14:56:06 -0600 Subject: [PATCH 1221/1626] eCryptfs: Remove mmap from directory operations Adrian reported that mkfontscale didn't work inside of eCryptfs mounts. Strace revealed the following: open("./", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|O_CLOEXEC) = 3 fcntl64(3, F_GETFD) = 0x1 (flags FD_CLOEXEC) open("./fonts.scale", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 4 getdents(3, /* 80 entries */, 32768) = 2304 open("./.", O_RDONLY) = 5 fcntl64(5, F_SETFD, FD_CLOEXEC) = 0 fstat64(5, {st_mode=S_IFDIR|0755, st_size=16384, ...}) = 0 mmap2(NULL, 16384, PROT_READ, MAP_PRIVATE, 5, 0) = 0xb7fcf000 close(5) = 0 --- SIGBUS (Bus error) @ 0 (0) --- +++ killed by SIGBUS +++ The mmap2() on a directory was successful, resulting in a SIGBUS signal later. This patch removes mmap() from the list of possible ecryptfs_dir_fops so that mmap() isn't possible on eCryptfs directory files. https://bugs.launchpad.net/ecryptfs/+bug/400443 Reported-by: Adrian C. Signed-off-by: Tyler Hicks --- fs/ecryptfs/file.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index 9e944057001b..3efc7fdc3c39 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -299,7 +299,6 @@ static int ecryptfs_ioctl(struct inode *inode, struct file *file, const struct file_operations ecryptfs_dir_fops = { .readdir = ecryptfs_readdir, .ioctl = ecryptfs_ioctl, - .mmap = generic_file_mmap, .open = ecryptfs_open, .flush = ecryptfs_flush, .release = ecryptfs_release, From e27759d7a333d1f25d628c4f7caf845c51be51c2 Mon Sep 17 00:00:00 2001 From: Erez Zadok Date: Thu, 3 Dec 2009 13:35:27 -0500 Subject: [PATCH 1222/1626] ecryptfs: initialize private persistent file before dereferencing pointer Ecryptfs_open dereferences a pointer to the private lower file (the one stored in the ecryptfs inode), without checking if the pointer is NULL. Right afterward, it initializes that pointer if it is NULL. Swap order of statements to first initialize. Bug discovered by Duckjin Kang. Signed-off-by: Duckjin Kang Signed-off-by: Erez Zadok Cc: Dustin Kirkland Cc: Al Viro Cc: Signed-off-by: Tyler Hicks --- fs/ecryptfs/file.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index 3efc7fdc3c39..dde7bb48bb5f 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -191,13 +191,6 @@ static int ecryptfs_open(struct inode *inode, struct file *file) | ECRYPTFS_ENCRYPTED); } mutex_unlock(&crypt_stat->cs_mutex); - if ((ecryptfs_inode_to_private(inode)->lower_file->f_flags & O_RDONLY) - && !(file->f_flags & O_RDONLY)) { - rc = -EPERM; - printk(KERN_WARNING "%s: Lower persistent file is RO; eCryptfs " - "file must hence be opened RO\n", __func__); - goto out; - } if (!ecryptfs_inode_to_private(inode)->lower_file) { rc = ecryptfs_init_persistent_file(ecryptfs_dentry); if (rc) { @@ -208,6 +201,13 @@ static int ecryptfs_open(struct inode *inode, struct file *file) goto out; } } + if ((ecryptfs_inode_to_private(inode)->lower_file->f_flags & O_RDONLY) + && !(file->f_flags & O_RDONLY)) { + rc = -EPERM; + printk(KERN_WARNING "%s: Lower persistent file is RO; eCryptfs " + "file must hence be opened RO\n", __func__); + goto out; + } ecryptfs_set_file_lower( file, ecryptfs_inode_to_private(inode)->lower_file); if (S_ISDIR(ecryptfs_dentry->d_inode->i_mode)) { From 0d132f7364694da8f7cafd49e2fc2721b73e96e4 Mon Sep 17 00:00:00 2001 From: Erez Zadok Date: Sat, 5 Dec 2009 21:17:09 -0500 Subject: [PATCH 1223/1626] ecryptfs: don't ignore return value from lock_rename Signed-off-by: Erez Zadok Cc: Dustin Kirkland Cc: Andrew Morton Cc: Al Viro Signed-off-by: Tyler Hicks --- fs/ecryptfs/inode.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 5726d7adaf5b..764dc777b268 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -614,6 +614,7 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry, struct dentry *lower_new_dentry; struct dentry *lower_old_dir_dentry; struct dentry *lower_new_dir_dentry; + struct dentry *trap = NULL; lower_old_dentry = ecryptfs_dentry_to_lower(old_dentry); lower_new_dentry = ecryptfs_dentry_to_lower(new_dentry); @@ -621,7 +622,17 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry, dget(lower_new_dentry); lower_old_dir_dentry = dget_parent(lower_old_dentry); lower_new_dir_dentry = dget_parent(lower_new_dentry); - lock_rename(lower_old_dir_dentry, lower_new_dir_dentry); + trap = lock_rename(lower_old_dir_dentry, lower_new_dir_dentry); + /* source should not be ancestor of target */ + if (trap == lower_old_dentry) { + rc = -EINVAL; + goto out_lock; + } + /* target should not be ancestor of source */ + if (trap == lower_new_dentry) { + rc = -ENOTEMPTY; + goto out_lock; + } rc = vfs_rename(lower_old_dir_dentry->d_inode, lower_old_dentry, lower_new_dir_dentry->d_inode, lower_new_dentry); if (rc) From c44a66d674688f1e1d0b2f6f56bd9c6a1b061cae Mon Sep 17 00:00:00 2001 From: Erez Zadok Date: Sun, 6 Dec 2009 18:05:30 -0500 Subject: [PATCH 1224/1626] ecryptfs: remove unnecessary d_drop calls in ecryptfs_link Unnecessary because it would unhash perfectly valid dentries, causing them to have to be re-looked up the next time they're needed, which presumably is right after. Signed-off-by: Aseem Rastogi Signed-off-by: Shrikar archak Signed-off-by: Erez Zadok Cc: Saumitra Bhanage Cc: Al Viro Signed-off-by: Tyler Hicks --- fs/ecryptfs/inode.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 764dc777b268..e03415293625 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -463,9 +463,6 @@ out_lock: unlock_dir(lower_dir_dentry); dput(lower_new_dentry); dput(lower_old_dentry); - d_drop(lower_old_dentry); - d_drop(new_dentry); - d_drop(old_dentry); return rc; } From 3469b57329f80db5a41cf42d1c8f7690269f57e7 Mon Sep 17 00:00:00 2001 From: Erez Zadok Date: Sun, 6 Dec 2009 18:51:15 -0500 Subject: [PATCH 1225/1626] ecryptfs: pass matching flags to interpose as defined and used there ecryptfs_interpose checks if one of the flags passed is ECRYPTFS_INTERPOSE_FLAG_D_ADD, defined as 0x00000001 in ecryptfs_kernel.h. But the only user of ecryptfs_interpose to pass a non-zero flag to it, has hard-coded the value as "1". This could spell trouble if any of these values changes in the future. Signed-off-by: Erez Zadok Cc: Dustin Kirkland Cc: Al Viro Signed-off-by: Tyler Hicks --- fs/ecryptfs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index e03415293625..4a430ab4115c 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -282,7 +282,8 @@ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry, goto out; } rc = ecryptfs_interpose(lower_dentry, ecryptfs_dentry, - ecryptfs_dir_inode->i_sb, 1); + ecryptfs_dir_inode->i_sb, + ECRYPTFS_INTERPOSE_FLAG_D_ADD); if (rc) { printk(KERN_ERR "%s: Error interposing; rc = [%d]\n", __func__, rc); From fe0fc013cd8bbd2f4737c1b2694b37dd7fe459cb Mon Sep 17 00:00:00 2001 From: Erez Zadok Date: Mon, 4 Jan 2010 18:17:02 -0500 Subject: [PATCH 1226/1626] ecryptfs: fix interpose/interpolate typos in comments Signed-off-by: Erez Zadok Acked-by: Dustin Kirkland Signed-off-by: Tyler Hicks --- fs/ecryptfs/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 567bc4b9f70a..ea2f92101dfe 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -585,8 +585,8 @@ out: * with as much information as it can before needing * the lower filesystem. * ecryptfs_read_super(): this accesses the lower filesystem and uses - * ecryptfs_interpolate to perform most of the linking - * ecryptfs_interpolate(): links the lower filesystem into ecryptfs + * ecryptfs_interpose to perform most of the linking + * ecryptfs_interpose(): links the lower filesystem into ecryptfs (inode.c) */ static int ecryptfs_get_sb(struct file_system_type *fs_type, int flags, const char *dev_name, void *raw_data, From 4aa25bcb7dac2d583f1557e2be2d0b598581da54 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 16 Jan 2010 17:00:26 +0100 Subject: [PATCH 1227/1626] ecryptfs: Eliminate useless code The variable lower_dentry is initialized twice to the same (side effect-free) expression. Drop one initialization. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // @forall@ idexpression *x; identifier f!=ERR_PTR; @@ x = f(...) ... when != x ( x = f(...,<+...x...+>,...) | * x = f(...) ) // Signed-off-by: Julia Lawall Signed-off-by: Tyler Hicks --- fs/ecryptfs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index dde7bb48bb5f..678172b61be2 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -158,7 +158,7 @@ static int ecryptfs_open(struct inode *inode, struct file *file) struct dentry *ecryptfs_dentry = file->f_path.dentry; /* Private value of ecryptfs_dentry allocated in * ecryptfs_lookup() */ - struct dentry *lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry); + struct dentry *lower_dentry; struct ecryptfs_file_info *file_info; mount_crypt_stat = &ecryptfs_superblock_to_private( From ece550f51ba175c14ec3ec047815927d7386ea1f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 19 Jan 2010 12:34:32 +0300 Subject: [PATCH 1228/1626] ecryptfs: use after free The "full_alg_name" variable is used on a couple error paths, so we shouldn't free it until the end. Signed-off-by: Dan Carpenter Cc: stable@kernel.org Signed-off-by: Tyler Hicks --- fs/ecryptfs/crypto.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index fbb6e5eed697..7cb0a59f4b9d 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -1748,7 +1748,7 @@ ecryptfs_process_key_cipher(struct crypto_blkcipher **key_tfm, char *cipher_name, size_t *key_size) { char dummy_key[ECRYPTFS_MAX_KEY_BYTES]; - char *full_alg_name; + char *full_alg_name = NULL; int rc; *key_tfm = NULL; @@ -1763,7 +1763,6 @@ ecryptfs_process_key_cipher(struct crypto_blkcipher **key_tfm, if (rc) goto out; *key_tfm = crypto_alloc_blkcipher(full_alg_name, 0, CRYPTO_ALG_ASYNC); - kfree(full_alg_name); if (IS_ERR(*key_tfm)) { rc = PTR_ERR(*key_tfm); printk(KERN_ERR "Unable to allocate crypto cipher with name " @@ -1786,6 +1785,7 @@ ecryptfs_process_key_cipher(struct crypto_blkcipher **key_tfm, goto out; } out: + kfree(full_alg_name); return rc; } From 2205cbe8ecaf5f3ab911cef839c94d05ea5b0c76 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 19 Jan 2010 16:55:41 -0700 Subject: [PATCH 1229/1626] ACPI: processor: restrict early _PDC to opt-in platforms Commit 78f1699 (ACPI: processor: call _PDC early) blindly walks the namespace and calls _PDC on every processor object it finds. This change may cause issues on platforms that declare dummy values for SSDTs on non-present processors (disabled in MADT). When we call _PDC and dynamically attempt to execute the AML Load() op on these dummy SSDTs, there's no telling what might happen. Rather than finding every platform that has bogus SSDTs, restrict early _PDC calls to platforms that are known to need early evaluation of _PDC. This is a minimal, temporary fix (given the context of the current release cycle). A real solution of checking the MADT for non-present processors will be written for the next merge window. References: http://bugzilla.kernel.org/show_bug.cgi?id=14710 http://bugzilla.kernel.org/show_bug.cgi?id=14954 Signed-off-by: Alex Chiang Signed-off-by: Len Brown --- drivers/acpi/processor_pdc.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c index 30e4dc0cdf30..f3364371207e 100644 --- a/drivers/acpi/processor_pdc.c +++ b/drivers/acpi/processor_pdc.c @@ -144,6 +144,29 @@ void acpi_processor_set_pdc(acpi_handle handle) } EXPORT_SYMBOL_GPL(acpi_processor_set_pdc); +static int early_pdc_optin; +static int set_early_pdc_optin(const struct dmi_system_id *id) +{ + early_pdc_optin = 1; + return 0; +} + +static struct dmi_system_id __cpuinitdata early_pdc_optin_table[] = { + { + set_early_pdc_optin, "HP Envy", { + DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Envy") }, NULL}, + { + set_early_pdc_optin, "HP Pavilion dv6", { + DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv6") }, NULL}, + { + set_early_pdc_optin, "HP Pavilion dv7", { + DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7") }, NULL}, + {}, +}; + static acpi_status early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv) { @@ -159,6 +182,13 @@ void acpi_early_processor_set_pdc(void) */ dmi_check_system(processor_idle_dmi_table); + /* + * Allow systems to opt-in to early _PDC evaluation. + */ + dmi_check_system(early_pdc_optin_table); + if (!early_pdc_optin) + return; + acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, early_init_pdc, NULL, NULL, NULL); From 7f07a605a3929d2d94dcbad8ccb7d280958d21f9 Mon Sep 17 00:00:00 2001 From: Darren Jenkins Date: Tue, 12 Jan 2010 23:37:07 +1100 Subject: [PATCH 1230/1626] ACPI: power_meter: remove double kfree() resource->domain_devices can be double kfree()'d in a couple of places. Fix this by setting num_domain_devices = 0 after the kfree(). Coverity CID: 13356, 13355, 13354 Signed-off-by: Darren Jenkins Acked-by: Darrick J. Wong Signed-off-by: Len Brown --- drivers/acpi/power_meter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c index ca75c36f754c..dc4ffadf8122 100644 --- a/drivers/acpi/power_meter.c +++ b/drivers/acpi/power_meter.c @@ -534,6 +534,7 @@ static void remove_domain_devices(struct acpi_power_meter_resource *resource) kfree(resource->domain_devices); kobject_put(resource->holders_dir); + resource->num_domain_devices = 0; } static int read_domain_devices(struct acpi_power_meter_resource *resource) @@ -740,7 +741,6 @@ skip_unsafe_cap: return res; error: - remove_domain_devices(resource); remove_attrs(resource); return res; } From 5d76b6f6c17572e662f5c99c2023adae92100855 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 19 Jan 2010 22:41:14 -0500 Subject: [PATCH 1231/1626] ACPI: enable C2 and Turbo-mode on Nehalem notebooks on A/C Linux has always ignored ACPI BIOS C2 with exit latency > 100 usec, and the ACPI spec is clear that is correct FADT-supplied C2. However, the ACPI spec explicitly states that _CST-supplied C-states have no latency limits. So move the 100usec C2 test out of the code shared by FADT and _CST code-paths, and into the FADT-specific path. This bug has not been visible until Nehalem, which advertises a CPU-C2 worst case exit latency on servers of 205usec. That (incorrect) figure is being used by BIOS writers on mobile Nehalem systems for the AC configuration. Thus, Linux ignores C2 leaving just C1, which is saves less power, and also impacts performance by preventing the use of turbo mode. http://bugzilla.kernel.org/show_bug.cgi?id=15064 Tested-by: Alex Chiang Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index d1676b1754d9..8f6da9acc8e4 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -305,6 +305,17 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency; pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency; + /* + * FADT specified C2 latency must be less than or equal to + * 100 microseconds. + */ + if (acpi_gbl_FADT.C2latency > ACPI_PROCESSOR_MAX_C2_LATENCY) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "C2 latency too large [%d]\n", acpi_gbl_FADT.C2latency)); + /* invalidate C2 */ + pr->power.states[ACPI_STATE_C2].address = 0; + } + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "lvl2[0x%08x] lvl3[0x%08x]\n", pr->power.states[ACPI_STATE_C2].address, @@ -500,16 +511,6 @@ static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx) if (!cx->address) return; - /* - * C2 latency must be less than or equal to 100 - * microseconds. - */ - else if (cx->latency > ACPI_PROCESSOR_MAX_C2_LATENCY) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "latency too large [%d]\n", cx->latency)); - return; - } - /* * Otherwise we've met all of our C2 requirements. * Normalize the C2 latency to expidite policy From a6d72c189f6c4292ba1a323e8af24083790529f8 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 19 Jan 2010 23:10:04 -0500 Subject: [PATCH 1232/1626] ACPI: allow C3 > 1000usec Do for C3 what the previous patch did for C2. The C2 patch was in response to a highly visible and multiply reported C-state/turbo failure, while this change has no bug report in-hand. This will enable C3 in Linux on systems where BIOS overstates C3 latency in _CST. It will also enable future systems which may actually have C3 > 1000usec. Linux has always ignored ACPI BIOS C3 with exit latency > 1000 usec, and the ACPI spec is clear that is correct FADT-supplied C3. However, the ACPI spec explicitly states that _CST-supplied C-states have no latency limits. So move the 1000usec C3 test out of the code shared by FADT and _CST code-paths, and into the FADT-specific path. Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 8f6da9acc8e4..2c543b42eb1c 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -316,6 +316,17 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) pr->power.states[ACPI_STATE_C2].address = 0; } + /* + * FADT supplied C3 latency must be less than or equal to + * 1000 microseconds. + */ + if (acpi_gbl_FADT.C3latency > ACPI_PROCESSOR_MAX_C3_LATENCY) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "C3 latency too large [%d]\n", acpi_gbl_FADT.C3latency)); + /* invalidate C3 */ + pr->power.states[ACPI_STATE_C3].address = 0; + } + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "lvl2[0x%08x] lvl3[0x%08x]\n", pr->power.states[ACPI_STATE_C2].address, @@ -532,16 +543,6 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr, if (!cx->address) return; - /* - * C3 latency must be less than or equal to 1000 - * microseconds. - */ - else if (cx->latency > ACPI_PROCESSOR_MAX_C3_LATENCY) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "latency too large [%d]\n", cx->latency)); - return; - } - /* * PIIX4 Erratum #18: We don't support C3 when Type-F (fast) * DMA transfers are used by any ISA device to avoid livelock. From d22edd293ff3f1e2d252f164fe2cf744620cb660 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 19 Jan 2010 23:29:09 -0500 Subject: [PATCH 1233/1626] ACPI: delete acpi_processor_power_verify_c2() no functional change -- cleanup only. acpi_processor_power_verify_c2() was nearly empty due to a previous patch, so expand its remains into its one caller and delete it. Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 2c543b42eb1c..7c0441f63b39 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -516,23 +516,6 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) return status; } -static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx) -{ - - if (!cx->address) - return; - - /* - * Otherwise we've met all of our C2 requirements. - * Normalize the C2 latency to expidite policy - */ - cx->valid = 1; - - cx->latency_ticks = cx->latency; - - return; -} - static void acpi_processor_power_verify_c3(struct acpi_processor *pr, struct acpi_processor_cx *cx) { @@ -631,7 +614,10 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) break; case ACPI_STATE_C2: - acpi_processor_power_verify_c2(cx); + if (!cx->address) + break; + cx->valid = 1; + cx->latency_ticks = cx->latency; /* Normalize latency */ break; case ACPI_STATE_C3: From 47103277f8861dcb48ab845533db331ddb9427ca Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Tue, 19 Jan 2010 19:23:23 +0200 Subject: [PATCH 1234/1626] perf kmem: Increase "Hit" column length It's fairly easy to overflow the "Hit" column with just few seconds of tracing so increase the column length to avoid broken formatting. Signed-off-by: Pekka Enberg Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Li Zefan Cc: Xiao Guangrong LKML-Reference: <1263921803-10214-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar --- tools/perf/builtin-kmem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c index 7ceb7416c316..33bb9dfb8e68 100644 --- a/tools/perf/builtin-kmem.c +++ b/tools/perf/builtin-kmem.c @@ -375,7 +375,7 @@ static void __print_result(struct rb_root *root, struct perf_session *session, printf("%.102s\n", graph_dotted_line); printf(" %-34s |", is_caller ? "Callsite": "Alloc Ptr"); - printf(" Total_alloc/Per | Total_req/Per | Hit | Ping-pong | Frag\n"); + printf(" Total_alloc/Per | Total_req/Per | Hit | Ping-pong | Frag\n"); printf("%.102s\n", graph_dotted_line); next = rb_first(root); @@ -401,7 +401,7 @@ static void __print_result(struct rb_root *root, struct perf_session *session, snprintf(buf, sizeof(buf), "%#Lx", addr); printf(" %-34s |", buf); - printf(" %9llu/%-5lu | %9llu/%-5lu | %6lu | %8lu | %6.3f%%\n", + printf(" %9llu/%-5lu | %9llu/%-5lu | %8lu | %8lu | %6.3f%%\n", (unsigned long long)data->bytes_alloc, (unsigned long)data->bytes_alloc / data->hit, (unsigned long long)data->bytes_req, From b00eca8cd66029128615e8be9a19e284a950c0f2 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Tue, 19 Jan 2010 19:26:11 +0200 Subject: [PATCH 1235/1626] perf kmem: Print usage help for unknown commands This patch fixes "perf kmem" to print usage help instead of doing nothing. Signed-off-by: Pekka Enberg Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Li Zefan Cc: Xiao Guangrong LKML-Reference: <1263921971-10782-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar --- tools/perf/builtin-kmem.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c index 33bb9dfb8e68..93c67bf53d2c 100644 --- a/tools/perf/builtin-kmem.c +++ b/tools/perf/builtin-kmem.c @@ -784,7 +784,8 @@ int cmd_kmem(int argc, const char **argv, const char *prefix __used) setup_sorting(&alloc_sort, default_sort_order); return __cmd_kmem(); - } + } else + usage_with_options(kmem_usage, kmem_options); return 0; } From dc99be47667c56046555e89e62f1ac17fa06329a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 20 Jan 2010 08:35:06 +0100 Subject: [PATCH 1236/1626] ALSA: hda - Fix HP T5735 automute This patch fixes the aut-mute setup on HP T5735 with ALC262 codec. Instead of wrong amp, use pin control toggling for muting the speaker now. Tested-by: Lee Trager Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6ae610c0111e..d00e6d1da085 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10382,7 +10382,7 @@ static void alc262_hp_t5735_setup(struct hda_codec *codec) struct alc_spec *spec = codec->spec; spec->autocfg.hp_pins[0] = 0x15; - spec->autocfg.speaker_pins[0] = 0x0c; /* HACK: not actually a pin */ + spec->autocfg.speaker_pins[0] = 0x14; } static struct snd_kcontrol_new alc262_hp_t5735_mixer[] = { @@ -11793,9 +11793,9 @@ static struct alc_config_preset alc262_presets[] = { .num_channel_mode = ARRAY_SIZE(alc262_modes), .channel_mode = alc262_modes, .input_mux = &alc262_capture_source, - .unsol_event = alc_automute_amp_unsol_event, + .unsol_event = alc_sku_unsol_event, .setup = alc262_hp_t5735_setup, - .init_hook = alc_automute_amp, + .init_hook = alc_inithook, }, [ALC262_HP_RP5700] = { .mixers = { alc262_hp_rp5700_mixer }, From 534ead709235b967b659947c55d9130873a432c4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 14 Jan 2010 16:18:09 +0900 Subject: [PATCH 1237/1626] libata: retry FS IOs even if it has failed with AC_ERR_INVALID libata currently doesn't retry if a command fails with AC_ERR_INVALID assuming that retrying won't get it any further even if retried. However, a failure may be classified as invalid through hardware glitch (incorrect reading of the error register or firmware bug) and there isn't whole lot to gain by not retrying as actually invalid commands will be failed immediately. Also, commands serving FS IOs are extremely unlikely to be invalid. Retry FS IOs even if it's marked invalid. Transient and incorrect invalid failure was seen while debugging firmware related issue on Samsung n130 on bko#14314. http://bugzilla.kernel.org/show_bug.cgi?id=14314 Signed-off-by: Tejun Heo Reported-by: Johannes Stezenbach Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 0ea97c942ced..9f6cfac0f2cc 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2028,8 +2028,9 @@ static void ata_eh_link_autopsy(struct ata_link *link) qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER); /* determine whether the command is worth retrying */ - if (!(qc->err_mask & AC_ERR_INVALID) && - ((qc->flags & ATA_QCFLAG_IO) || qc->err_mask != AC_ERR_DEV)) + if (qc->flags & ATA_QCFLAG_IO || + (!(qc->err_mask & AC_ERR_INVALID) && + qc->err_mask != AC_ERR_DEV)) qc->flags |= ATA_QCFLAG_RETRY; /* accumulate error info */ From 0324f59fc945b76337dbc18f4ad4b4383f683ae5 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 19 Jan 2010 17:30:54 -0700 Subject: [PATCH 1238/1626] OMAP4: PRCM: Fix the base address for CHIRONSS reg defines The CHIRONSS has its own local PRCM module and the register defines need to use the CHIRONSS base and not the PRM base. The changes are generated by updating the script which autogenerates the file modifed in the patch. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/prm.h | 2 ++ arch/arm/mach-omap2/prm44xx.h | 32 ++++++++++++++++---------------- 2 files changed, 18 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index ea050ce188a7..40f006285163 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -24,6 +24,8 @@ OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) #define OMAP44XX_PRM_REGADDR(module, reg) \ OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg)) +#define OMAP44XX_CHIRONSS_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP4430_CHIRONSS_BASE + (module) + (reg)) #include "prm44xx.h" diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index 89be97f0589d..adb2558bb121 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -386,26 +386,26 @@ /* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */ -#define OMAP4430_REVISION_PRCM OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000) +#define OMAP4430_REVISION_PRCM OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000) /* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */ -#define OMAP4430_CHIRON_PRCM_PRM_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000) +#define OMAP4430_CHIRON_PRCM_PRM_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000) /* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */ -#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000) -#define OMAP4430_PM_PDA_CPU0_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004) -#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008) -#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c) -#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010) -#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014) -#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018) +#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000) +#define OMAP4430_PM_PDA_CPU0_PWRSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004) +#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008) +#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c) +#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010) +#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014) +#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018) /* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */ -#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000) -#define OMAP4430_PM_PDA_CPU1_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004) -#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008) -#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c) -#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010) -#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014) -#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018) +#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000) +#define OMAP4430_PM_PDA_CPU1_PWRSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004) +#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008) +#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c) +#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010) +#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014) +#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018) #endif From ecbb06594744b72c362cb2252cb5f6de7cf1b394 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 19 Jan 2010 17:30:55 -0700 Subject: [PATCH 1239/1626] OMAP4: clocks: Fix the clksel_rate struct DPLL divs For all DPLL's the valid dividers are same as the values to be programmed in the register. 0 is an invalid value. The changes are generated by updating the script which autogenerates the file modifed in the patch. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock44xx_data.c | 62 ++++++++++++++-------------- 1 file changed, 31 insertions(+), 31 deletions(-) diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 2210e227d78a..9d882bcb56e3 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -346,37 +346,37 @@ static struct clk aess_fclk = { }; static const struct clksel_rate div31_1to31_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_4430 }, - { .div = 2, .val = 1, .flags = RATE_IN_4430 }, - { .div = 3, .val = 2, .flags = RATE_IN_4430 }, - { .div = 4, .val = 3, .flags = RATE_IN_4430 }, - { .div = 5, .val = 4, .flags = RATE_IN_4430 }, - { .div = 6, .val = 5, .flags = RATE_IN_4430 }, - { .div = 7, .val = 6, .flags = RATE_IN_4430 }, - { .div = 8, .val = 7, .flags = RATE_IN_4430 }, - { .div = 9, .val = 8, .flags = RATE_IN_4430 }, - { .div = 10, .val = 9, .flags = RATE_IN_4430 }, - { .div = 11, .val = 10, .flags = RATE_IN_4430 }, - { .div = 12, .val = 11, .flags = RATE_IN_4430 }, - { .div = 13, .val = 12, .flags = RATE_IN_4430 }, - { .div = 14, .val = 13, .flags = RATE_IN_4430 }, - { .div = 15, .val = 14, .flags = RATE_IN_4430 }, - { .div = 16, .val = 15, .flags = RATE_IN_4430 }, - { .div = 17, .val = 16, .flags = RATE_IN_4430 }, - { .div = 18, .val = 17, .flags = RATE_IN_4430 }, - { .div = 19, .val = 18, .flags = RATE_IN_4430 }, - { .div = 20, .val = 19, .flags = RATE_IN_4430 }, - { .div = 21, .val = 20, .flags = RATE_IN_4430 }, - { .div = 22, .val = 21, .flags = RATE_IN_4430 }, - { .div = 23, .val = 22, .flags = RATE_IN_4430 }, - { .div = 24, .val = 23, .flags = RATE_IN_4430 }, - { .div = 25, .val = 24, .flags = RATE_IN_4430 }, - { .div = 26, .val = 25, .flags = RATE_IN_4430 }, - { .div = 27, .val = 26, .flags = RATE_IN_4430 }, - { .div = 28, .val = 27, .flags = RATE_IN_4430 }, - { .div = 29, .val = 28, .flags = RATE_IN_4430 }, - { .div = 30, .val = 29, .flags = RATE_IN_4430 }, - { .div = 31, .val = 30, .flags = RATE_IN_4430 }, + { .div = 1, .val = 1, .flags = RATE_IN_4430 }, + { .div = 2, .val = 2, .flags = RATE_IN_4430 }, + { .div = 3, .val = 3, .flags = RATE_IN_4430 }, + { .div = 4, .val = 4, .flags = RATE_IN_4430 }, + { .div = 5, .val = 5, .flags = RATE_IN_4430 }, + { .div = 6, .val = 6, .flags = RATE_IN_4430 }, + { .div = 7, .val = 7, .flags = RATE_IN_4430 }, + { .div = 8, .val = 8, .flags = RATE_IN_4430 }, + { .div = 9, .val = 9, .flags = RATE_IN_4430 }, + { .div = 10, .val = 10, .flags = RATE_IN_4430 }, + { .div = 11, .val = 11, .flags = RATE_IN_4430 }, + { .div = 12, .val = 12, .flags = RATE_IN_4430 }, + { .div = 13, .val = 13, .flags = RATE_IN_4430 }, + { .div = 14, .val = 14, .flags = RATE_IN_4430 }, + { .div = 15, .val = 15, .flags = RATE_IN_4430 }, + { .div = 16, .val = 16, .flags = RATE_IN_4430 }, + { .div = 17, .val = 17, .flags = RATE_IN_4430 }, + { .div = 18, .val = 18, .flags = RATE_IN_4430 }, + { .div = 19, .val = 19, .flags = RATE_IN_4430 }, + { .div = 20, .val = 20, .flags = RATE_IN_4430 }, + { .div = 21, .val = 21, .flags = RATE_IN_4430 }, + { .div = 22, .val = 22, .flags = RATE_IN_4430 }, + { .div = 23, .val = 23, .flags = RATE_IN_4430 }, + { .div = 24, .val = 24, .flags = RATE_IN_4430 }, + { .div = 25, .val = 25, .flags = RATE_IN_4430 }, + { .div = 26, .val = 26, .flags = RATE_IN_4430 }, + { .div = 27, .val = 27, .flags = RATE_IN_4430 }, + { .div = 28, .val = 28, .flags = RATE_IN_4430 }, + { .div = 29, .val = 29, .flags = RATE_IN_4430 }, + { .div = 30, .val = 30, .flags = RATE_IN_4430 }, + { .div = 31, .val = 31, .flags = RATE_IN_4430 }, { .div = 0 }, }; From af022fafa89cca5731da3e3325dc027ed8d57bcd Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 19 Jan 2010 17:30:55 -0700 Subject: [PATCH 1240/1626] OMAP1 clock: fix for "BUG: spinlock lockup on CPU#0" Commit 52650505fbf3a6ab851c801f54e73e76c55ab8da caused clock initialization to fail on OMAP1 with "BUG: spinlock lockup on CPU#0" -- this is because omap1_select_table_rate() and omap1_round_to_table_rate() call clk_get_rate() with the clockfw spinlock held. Fix by accessing the rate directly from the internal clock framework functions. Thanks to Tony Lindgren for reporting and testing the fix. Signed-off-by: Paul Walmsley Cc: Tony Lindgren --- arch/arm/mach-omap1/clock.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 2ba9ab953731..04f1d29cba2c 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -214,8 +214,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate) struct mpu_rate * ptr; unsigned long dpll1_rate, ref_rate; - dpll1_rate = clk_get_rate(ck_dpll1_p); - ref_rate = clk_get_rate(ck_ref_p); + dpll1_rate = ck_dpll1_p->rate; + ref_rate = ck_ref_p->rate; for (ptr = omap1_rate_table; ptr->rate; ptr++) { if (ptr->xtal != ref_rate) @@ -306,7 +306,7 @@ long omap1_round_to_table_rate(struct clk *clk, unsigned long rate) long highest_rate; unsigned long ref_rate; - ref_rate = clk_get_rate(ck_ref_p); + ref_rate = ck_ref_p->rate; highest_rate = -EINVAL; From f3d1ccc14f37a07614c67a270f05a8d94ec3667c Mon Sep 17 00:00:00 2001 From: Andrew Randrianasulu Date: Wed, 20 Jan 2010 11:36:30 -0500 Subject: [PATCH 1241/1626] drm/radeon/kms/r200: fix bug in CS parser The checks for CUBE and 3D textures were inverted. fixes fdo bug 24159 agd5f: added comments for clarity. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r200.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/r200.c b/drivers/gpu/drm/radeon/r200.c index 20942127c46b..ff1e0cd608bf 100644 --- a/drivers/gpu/drm/radeon/r200.c +++ b/drivers/gpu/drm/radeon/r200.c @@ -371,13 +371,16 @@ int r200_packet0_check(struct radeon_cs_parser *p, case 5: case 6: case 7: + /* 1D/2D */ track->textures[i].tex_coord_type = 0; break; case 1: - track->textures[i].tex_coord_type = 1; + /* CUBE */ + track->textures[i].tex_coord_type = 2; break; case 2: - track->textures[i].tex_coord_type = 2; + /* 3D */ + track->textures[i].tex_coord_type = 1; break; } break; From 828153e29206196552c2cc34461ad7e5b93e3f22 Mon Sep 17 00:00:00 2001 From: Andrew Randrianasulu Date: Wed, 20 Jan 2010 11:56:07 -0500 Subject: [PATCH 1242/1626] drm/radeon/kms/r200: fix bug in CS parser Add missing vertex shader regs for r200. fixed fdo bug 26061 agd5f: use official reg names Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/reg_srcs/r200 | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/radeon/reg_srcs/r200 b/drivers/gpu/drm/radeon/reg_srcs/r200 index 6021c8849a16..c29ac434ac9c 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/r200 +++ b/drivers/gpu/drm/radeon/reg_srcs/r200 @@ -91,6 +91,8 @@ r200 0x3294 0x22b8 SE_TCL_TEX_CYL_WRAP_CTL 0x22c0 SE_TCL_UCP_VERT_BLEND_CNTL 0x22c4 SE_TCL_POINT_SPRITE_CNTL +0x22d0 SE_PVS_CNTL +0x22d4 SE_PVS_CONST_CNTL 0x2648 RE_POINTSIZE 0x26c0 RE_TOP_LEFT 0x26c4 RE_MISC From cf57fc7aa2ac61d02a29550b99db6a01ccd7917c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 18 Jan 2010 20:20:07 -0500 Subject: [PATCH 1243/1626] drm/radeon/kms/r100: fix bug in CS parser The first dword of PACKET3_3D_DRAW_IMMD maps to SE_VTX_FMT so the vertex size is part of the draw packet. This patch fixes a possible case where you have a command buffer that does not contain SE_VTX_FMT register write, but does contain PACKET3_3D_DRAW_IMMD. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 62b27bede651..11c9a3fe6810 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -1504,6 +1504,7 @@ static int r100_packet3_check(struct radeon_cs_parser *p, DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n"); return -EINVAL; } + track->vtx_size = r100_get_vtx_size(radeon_get_ib_value(p, idx + 0)); track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1); track->immd_dwords = pkt->count - 1; r = r100_cs_track_check(p->rdev, track); From 07bec2df01cde5590a1700b992d12de3f46b12bc Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 13 Jan 2010 19:09:12 -0500 Subject: [PATCH 1244/1626] drm/radeon/kms: fix hardcoded mmio size in register functions newer asics have large mmio apertures Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index ab37dd0f2e71..c23278240a4e 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -847,7 +847,7 @@ void r600_kms_blit_copy(struct radeon_device *rdev, static inline uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg) { - if (reg < 0x10000) + if (reg < rdev->rmmio_size) return readl(((void __iomem *)rdev->rmmio) + reg); else { writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX); @@ -857,7 +857,7 @@ static inline uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg) static inline void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v) { - if (reg < 0x10000) + if (reg < rdev->rmmio_size) writel(v, ((void __iomem *)rdev->rmmio) + reg); else { writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX); From 9f53e7931610cbd1715fd2d2c0f9a853e17f02d8 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 19 Jan 2010 12:38:48 -0500 Subject: [PATCH 1245/1626] drm/radeon/kms/atom: fix some parser bugs - add support for inline src params - fix shift_left/shift_right and shl/shr ops shift_* ops use inline src params, shl/r use full params - fix mask op (uses inline params) Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atom.c | 90 ++++++++++++++++++++++++++++------- 1 file changed, 74 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c index 388140a7e651..9a3378184e1b 100644 --- a/drivers/gpu/drm/radeon/atom.c +++ b/drivers/gpu/drm/radeon/atom.c @@ -385,6 +385,32 @@ static uint32_t atom_get_src(atom_exec_context *ctx, uint8_t attr, int *ptr) return atom_get_src_int(ctx, attr, ptr, NULL, 1); } +static uint32_t atom_get_src_direct(atom_exec_context *ctx, uint8_t align, int *ptr) +{ + uint32_t val = 0xCDCDCDCD; + + switch (align) { + case ATOM_SRC_DWORD: + val = U32(*ptr); + (*ptr) += 4; + break; + case ATOM_SRC_WORD0: + case ATOM_SRC_WORD8: + case ATOM_SRC_WORD16: + val = U16(*ptr); + (*ptr) += 2; + break; + case ATOM_SRC_BYTE0: + case ATOM_SRC_BYTE8: + case ATOM_SRC_BYTE16: + case ATOM_SRC_BYTE24: + val = U8(*ptr); + (*ptr)++; + break; + } + return val; +} + static uint32_t atom_get_dst(atom_exec_context *ctx, int arg, uint8_t attr, int *ptr, uint32_t *saved, int print) { @@ -677,9 +703,9 @@ static void atom_op_mask(atom_exec_context *ctx, int *ptr, int arg) SDEBUG(" dst: "); dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1); SDEBUG(" src1: "); - src1 = atom_get_src(ctx, attr, ptr); + src1 = atom_get_src_direct(ctx, ((attr >> 3) & 7), ptr); SDEBUG(" src2: "); - src2 = atom_get_src(ctx, attr, ptr); + src2 = atom_get_src_direct(ctx, ((attr >> 3) & 7), ptr); dst &= src1; dst |= src2; SDEBUG(" dst: "); @@ -809,6 +835,38 @@ static void atom_op_setregblock(atom_exec_context *ctx, int *ptr, int arg) SDEBUG(" base: 0x%04X\n", ctx->ctx->reg_block); } +static void atom_op_shift_left(atom_exec_context *ctx, int *ptr, int arg) +{ + uint8_t attr = U8((*ptr)++), shift; + uint32_t saved, dst; + int dptr = *ptr; + attr &= 0x38; + attr |= atom_def_dst[attr >> 3] << 6; + SDEBUG(" dst: "); + dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1); + shift = atom_get_src_direct(ctx, ATOM_SRC_BYTE0, ptr); + SDEBUG(" shift: %d\n", shift); + dst <<= shift; + SDEBUG(" dst: "); + atom_put_dst(ctx, arg, attr, &dptr, dst, saved); +} + +static void atom_op_shift_right(atom_exec_context *ctx, int *ptr, int arg) +{ + uint8_t attr = U8((*ptr)++), shift; + uint32_t saved, dst; + int dptr = *ptr; + attr &= 0x38; + attr |= atom_def_dst[attr >> 3] << 6; + SDEBUG(" dst: "); + dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1); + shift = atom_get_src_direct(ctx, ATOM_SRC_BYTE0, ptr); + SDEBUG(" shift: %d\n", shift); + dst >>= shift; + SDEBUG(" dst: "); + atom_put_dst(ctx, arg, attr, &dptr, dst, saved); +} + static void atom_op_shl(atom_exec_context *ctx, int *ptr, int arg) { uint8_t attr = U8((*ptr)++), shift; @@ -818,7 +876,7 @@ static void atom_op_shl(atom_exec_context *ctx, int *ptr, int arg) attr |= atom_def_dst[attr >> 3] << 6; SDEBUG(" dst: "); dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1); - shift = U8((*ptr)++); + shift = atom_get_src(ctx, attr, ptr); SDEBUG(" shift: %d\n", shift); dst <<= shift; SDEBUG(" dst: "); @@ -834,7 +892,7 @@ static void atom_op_shr(atom_exec_context *ctx, int *ptr, int arg) attr |= atom_def_dst[attr >> 3] << 6; SDEBUG(" dst: "); dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1); - shift = U8((*ptr)++); + shift = atom_get_src(ctx, attr, ptr); SDEBUG(" shift: %d\n", shift); dst >>= shift; SDEBUG(" dst: "); @@ -937,18 +995,18 @@ static struct { atom_op_or, ATOM_ARG_FB}, { atom_op_or, ATOM_ARG_PLL}, { atom_op_or, ATOM_ARG_MC}, { - atom_op_shl, ATOM_ARG_REG}, { - atom_op_shl, ATOM_ARG_PS}, { - atom_op_shl, ATOM_ARG_WS}, { - atom_op_shl, ATOM_ARG_FB}, { - atom_op_shl, ATOM_ARG_PLL}, { - atom_op_shl, ATOM_ARG_MC}, { - atom_op_shr, ATOM_ARG_REG}, { - atom_op_shr, ATOM_ARG_PS}, { - atom_op_shr, ATOM_ARG_WS}, { - atom_op_shr, ATOM_ARG_FB}, { - atom_op_shr, ATOM_ARG_PLL}, { - atom_op_shr, ATOM_ARG_MC}, { + atom_op_shift_left, ATOM_ARG_REG}, { + atom_op_shift_left, ATOM_ARG_PS}, { + atom_op_shift_left, ATOM_ARG_WS}, { + atom_op_shift_left, ATOM_ARG_FB}, { + atom_op_shift_left, ATOM_ARG_PLL}, { + atom_op_shift_left, ATOM_ARG_MC}, { + atom_op_shift_right, ATOM_ARG_REG}, { + atom_op_shift_right, ATOM_ARG_PS}, { + atom_op_shift_right, ATOM_ARG_WS}, { + atom_op_shift_right, ATOM_ARG_FB}, { + atom_op_shift_right, ATOM_ARG_PLL}, { + atom_op_shift_right, ATOM_ARG_MC}, { atom_op_mul, ATOM_ARG_REG}, { atom_op_mul, ATOM_ARG_PS}, { atom_op_mul, ATOM_ARG_WS}, { From e2f8e87089427d3a203538dc73058b90e82b11f6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 19 Jan 2010 12:45:29 -0500 Subject: [PATCH 1246/1626] drm/radeon/kms/atom: upstream parser updates Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atom.c | 8 +++++++- drivers/gpu/drm/radeon/atom.h | 1 + 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c index 9a3378184e1b..cf3126108a48 100644 --- a/drivers/gpu/drm/radeon/atom.c +++ b/drivers/gpu/drm/radeon/atom.c @@ -246,6 +246,9 @@ static uint32_t atom_get_src_int(atom_exec_context *ctx, uint8_t attr, case ATOM_WS_ATTRIBUTES: val = gctx->io_attr; break; + case ATOM_WS_REGPTR: + val = gctx->reg_block; + break; default: val = ctx->ws[idx]; } @@ -508,6 +511,9 @@ static void atom_put_dst(atom_exec_context *ctx, int arg, uint8_t attr, case ATOM_WS_ATTRIBUTES: gctx->io_attr = val; break; + case ATOM_WS_REGPTR: + gctx->reg_block = val; + break; default: ctx->ws[idx] = val; } @@ -705,7 +711,7 @@ static void atom_op_mask(atom_exec_context *ctx, int *ptr, int arg) SDEBUG(" src1: "); src1 = atom_get_src_direct(ctx, ((attr >> 3) & 7), ptr); SDEBUG(" src2: "); - src2 = atom_get_src_direct(ctx, ((attr >> 3) & 7), ptr); + src2 = atom_get_src(ctx, attr, ptr); dst &= src1; dst |= src2; SDEBUG(" dst: "); diff --git a/drivers/gpu/drm/radeon/atom.h b/drivers/gpu/drm/radeon/atom.h index 47fd943f6d14..bc73781423a1 100644 --- a/drivers/gpu/drm/radeon/atom.h +++ b/drivers/gpu/drm/radeon/atom.h @@ -91,6 +91,7 @@ #define ATOM_WS_AND_MASK 0x45 #define ATOM_WS_FB_WINDOW 0x46 #define ATOM_WS_ATTRIBUTES 0x47 +#define ATOM_WS_REGPTR 0x48 #define ATOM_IIO_NOP 0 #define ATOM_IIO_START 1 From 54f088a9603dbee88809cb2ddfd8dc1ef8a74be5 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 19 Jan 2010 16:34:01 -0500 Subject: [PATCH 1247/1626] drm/radeon/kms: fix atombios_crtc_set_base Make it call the proper backend depending on the GPU family. Right now r4xx cards with atombios modesetting enabled were using the avivo crtc base code. This also allows us to add support for new asics more easily. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 260fcf59f00c..a60610271af6 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -575,8 +575,8 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } -int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y, - struct drm_framebuffer *old_fb) +static int avivo_crtc_set_base(struct drm_crtc *crtc, int x, int y, + struct drm_framebuffer *old_fb) { struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; @@ -706,6 +706,18 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y, return 0; } +int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct radeon_device *rdev = dev->dev_private; + + if (ASIC_IS_AVIVO(rdev)) + return avivo_crtc_set_base(crtc, x, y, old_fb); + else + return radeon_crtc_set_base(crtc, x, y, old_fb); +} + int atombios_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, @@ -727,7 +739,7 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, else { if (radeon_crtc->crtc_id == 0) atombios_set_crtc_dtd_timing(crtc, adjusted_mode); - radeon_crtc_set_base(crtc, x, y, old_fb); + atombios_crtc_set_base(crtc, x, y, old_fb); radeon_legacy_atom_set_surface(crtc); } atombios_overscan_setup(crtc, mode, adjusted_mode); From 615e0cb67968c94fd9e53797985843a5b816dec4 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 20 Jan 2010 16:22:53 -0500 Subject: [PATCH 1248/1626] drm/radeon/kms/r4xx: cleanup atom path most of radeon_legacy_atom_set_surface() is taken care of in atombios_set_base(), so remove the duplicate setup and move the remaining bits (DISP_MERGE setup and FP2 sync) to atombios_crtc.c where they are used. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 26 ++++++++- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 63 --------------------- drivers/gpu/drm/radeon/radeon_mode.h | 1 - 3 files changed, 25 insertions(+), 65 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index a60610271af6..e098bd0cbd26 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -718,6 +718,30 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y, return radeon_crtc_set_base(crtc, x, y, old_fb); } +/* properly set additional regs when using atombios */ +static void radeon_legacy_atom_fixup(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct radeon_device *rdev = dev->dev_private; + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + u32 disp_merge_cntl; + + switch (radeon_crtc->crtc_id) { + case 0: + disp_merge_cntl = RREG32(RADEON_DISP_MERGE_CNTL); + disp_merge_cntl &= ~RADEON_DISP_RGB_OFFSET_EN; + WREG32(RADEON_DISP_MERGE_CNTL, disp_merge_cntl); + break; + case 1: + disp_merge_cntl = RREG32(RADEON_DISP2_MERGE_CNTL); + disp_merge_cntl &= ~RADEON_DISP2_RGB_OFFSET_EN; + WREG32(RADEON_DISP2_MERGE_CNTL, disp_merge_cntl); + WREG32(RADEON_FP_H2_SYNC_STRT_WID, RREG32(RADEON_CRTC2_H_SYNC_STRT_WID)); + WREG32(RADEON_FP_V2_SYNC_STRT_WID, RREG32(RADEON_CRTC2_V_SYNC_STRT_WID)); + break; + } +} + int atombios_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, @@ -740,7 +764,7 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, if (radeon_crtc->crtc_id == 0) atombios_set_crtc_dtd_timing(crtc, adjusted_mode); atombios_crtc_set_base(crtc, x, y, old_fb); - radeon_legacy_atom_set_surface(crtc); + radeon_legacy_atom_fixup(crtc); } atombios_overscan_setup(crtc, mode, adjusted_mode); atombios_scaler_setup(crtc); diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index cc27485a07ad..762e07b08951 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -339,69 +339,6 @@ void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) } } -/* properly set crtc bpp when using atombios */ -void radeon_legacy_atom_set_surface(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct radeon_device *rdev = dev->dev_private; - struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); - int format; - uint32_t crtc_gen_cntl; - uint32_t disp_merge_cntl; - uint32_t crtc_pitch; - - switch (crtc->fb->bits_per_pixel) { - case 8: - format = 2; - break; - case 15: /* 555 */ - format = 3; - break; - case 16: /* 565 */ - format = 4; - break; - case 24: /* RGB */ - format = 5; - break; - case 32: /* xRGB */ - format = 6; - break; - default: - return; - } - - crtc_pitch = ((((crtc->fb->pitch / (crtc->fb->bits_per_pixel / 8)) * crtc->fb->bits_per_pixel) + - ((crtc->fb->bits_per_pixel * 8) - 1)) / - (crtc->fb->bits_per_pixel * 8)); - crtc_pitch |= crtc_pitch << 16; - - WREG32(RADEON_CRTC_PITCH + radeon_crtc->crtc_offset, crtc_pitch); - - switch (radeon_crtc->crtc_id) { - case 0: - disp_merge_cntl = RREG32(RADEON_DISP_MERGE_CNTL); - disp_merge_cntl &= ~RADEON_DISP_RGB_OFFSET_EN; - WREG32(RADEON_DISP_MERGE_CNTL, disp_merge_cntl); - - crtc_gen_cntl = RREG32(RADEON_CRTC_GEN_CNTL) & 0xfffff0ff; - crtc_gen_cntl |= (format << 8); - crtc_gen_cntl |= RADEON_CRTC_EXT_DISP_EN; - WREG32(RADEON_CRTC_GEN_CNTL, crtc_gen_cntl); - break; - case 1: - disp_merge_cntl = RREG32(RADEON_DISP2_MERGE_CNTL); - disp_merge_cntl &= ~RADEON_DISP2_RGB_OFFSET_EN; - WREG32(RADEON_DISP2_MERGE_CNTL, disp_merge_cntl); - - crtc_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL) & 0xfffff0ff; - crtc_gen_cntl |= (format << 8); - WREG32(RADEON_CRTC2_GEN_CNTL, crtc_gen_cntl); - WREG32(RADEON_FP_H2_SYNC_STRT_WID, RREG32(RADEON_CRTC2_H_SYNC_STRT_WID)); - WREG32(RADEON_FP_V2_SYNC_STRT_WID, RREG32(RADEON_CRTC2_V_SYNC_STRT_WID)); - break; - } -} - int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 91cb041cb40d..eb19b3022b0e 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -453,7 +453,6 @@ extern void atombios_crtc_dpms(struct drm_crtc *crtc, int mode); extern int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb); -extern void radeon_legacy_atom_set_surface(struct drm_crtc *crtc); extern int radeon_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, From 0c45249f419d8b86abe0e51c6627ca4b085e8c23 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 15 Jan 2010 14:44:37 +0100 Subject: [PATCH 1249/1626] drm/radeon/kms: r600/r700 disable irq at suspend To avoid hw doing anythings after we disabled PCIE GART, fully disable IRQ at suspend. Also cleanup a bit the ih structure and process function. Signed-off-by: Jerome Glisse Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 30 ++++++++++++++---------------- drivers/gpu/drm/radeon/radeon.h | 4 ++-- drivers/gpu/drm/radeon/rv770.c | 1 + 3 files changed, 17 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index b3713f61964c..a6a23a9f9a5c 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1954,6 +1954,7 @@ int r600_suspend(struct radeon_device *rdev) /* FIXME: we should wait for ring to be empty */ r600_cp_stop(rdev); rdev->cp.ready = false; + r600_irq_suspend(rdev); r600_wb_disable(rdev); r600_pcie_gart_disable(rdev); /* unpin shaders bo */ @@ -2200,14 +2201,14 @@ void r600_ih_ring_init(struct radeon_device *rdev, unsigned ring_size) rb_bufsz = drm_order(ring_size / 4); ring_size = (1 << rb_bufsz) * 4; rdev->ih.ring_size = ring_size; - rdev->ih.align_mask = 4 - 1; + rdev->ih.ptr_mask = rdev->ih.ring_size - 1; + rdev->ih.rptr = 0; } -static int r600_ih_ring_alloc(struct radeon_device *rdev, unsigned ring_size) +static int r600_ih_ring_alloc(struct radeon_device *rdev) { int r; - rdev->ih.ring_size = ring_size; /* Allocate ring buffer */ if (rdev->ih.ring_obj == NULL) { r = radeon_bo_create(rdev, NULL, rdev->ih.ring_size, @@ -2237,9 +2238,6 @@ static int r600_ih_ring_alloc(struct radeon_device *rdev, unsigned ring_size) return r; } } - rdev->ih.ptr_mask = (rdev->cp.ring_size / 4) - 1; - rdev->ih.rptr = 0; - return 0; } @@ -2389,7 +2387,7 @@ int r600_irq_init(struct radeon_device *rdev) u32 interrupt_cntl, ih_cntl, ih_rb_cntl; /* allocate ring */ - ret = r600_ih_ring_alloc(rdev, rdev->ih.ring_size); + ret = r600_ih_ring_alloc(rdev); if (ret) return ret; @@ -2452,10 +2450,15 @@ int r600_irq_init(struct radeon_device *rdev) return ret; } -void r600_irq_fini(struct radeon_device *rdev) +void r600_irq_suspend(struct radeon_device *rdev) { r600_disable_interrupts(rdev); r600_rlc_stop(rdev); +} + +void r600_irq_fini(struct radeon_device *rdev) +{ + r600_irq_suspend(rdev); r600_ih_ring_fini(rdev); } @@ -2648,9 +2651,7 @@ static inline u32 r600_get_ih_wptr(struct radeon_device *rdev) tmp |= IH_WPTR_OVERFLOW_CLEAR; WREG32(IH_RB_CNTL, tmp); } - wptr = wptr & WPTR_OFFSET_MASK; - - return wptr; + return (wptr & rdev->ih.ptr_mask); } /* r600 IV Ring @@ -2686,7 +2687,6 @@ int r600_irq_process(struct radeon_device *rdev) u32 wptr = r600_get_ih_wptr(rdev); u32 rptr = rdev->ih.rptr; u32 src_id, src_data; - u32 last_entry = rdev->ih.ring_size - 16; u32 ring_index, disp_int, disp_int_cont, disp_int_cont2; unsigned long flags; bool queue_hotplug = false; @@ -2820,10 +2820,8 @@ restart_ih: } /* wptr/rptr are in bytes! */ - if (rptr == last_entry) - rptr = 0; - else - rptr += 16; + rptr += 16; + rptr &= rdev->ih.ptr_mask; } /* make sure wptr hasn't changed while processing */ wptr = r600_get_ih_wptr(rdev); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index c23278240a4e..09c655f3843b 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -410,7 +410,6 @@ struct r600_ih { unsigned wptr_old; unsigned ring_size; uint64_t gpu_addr; - uint32_t align_mask; uint32_t ptr_mask; spinlock_t lock; bool enabled; @@ -1162,7 +1161,8 @@ extern int r600_irq_init(struct radeon_device *rdev); extern void r600_irq_fini(struct radeon_device *rdev); extern void r600_ih_ring_init(struct radeon_device *rdev, unsigned ring_size); extern int r600_irq_set(struct radeon_device *rdev); - +extern void r600_irq_suspend(struct radeon_device *rdev); +/* r600 audio */ extern int r600_audio_init(struct radeon_device *rdev); extern int r600_audio_tmds_index(struct drm_encoder *encoder); extern void r600_audio_set_clock(struct drm_encoder *encoder, int clock); diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index eb065bbe1eeb..c8cf2bc2b911 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -968,6 +968,7 @@ int rv770_suspend(struct radeon_device *rdev) /* FIXME: we should wait for ring to be empty */ r700_cp_stop(rdev); rdev->cp.ready = false; + r600_irq_suspend(rdev); r600_wb_disable(rdev); rv770_pcie_gart_disable(rdev); /* unpin shaders bo */ From 79c2bbc505751bb5130ac753251fc9a0eb37bb12 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 15 Jan 2010 14:44:38 +0100 Subject: [PATCH 1250/1626] drm/radeon/kms: r600/r700 don't process IRQ if not initialized In some rare case the wptr returned from the hw wasn't 0 and leaded to trick r600_process_irq that their were irq to process. Add a check to bail out if irq hasn't been initialized this will avoid oops provoqued by the rare wptr != 0 on initialization. Signed-off-by: Jerome Glisse Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index a6a23a9f9a5c..0f9a8c6788a3 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2473,8 +2473,12 @@ int r600_irq_set(struct radeon_device *rdev) return -EINVAL; } /* don't enable anything if the ih is disabled */ - if (!rdev->ih.enabled) + if (!rdev->ih.enabled) { + r600_disable_interrupts(rdev); + /* force the active interrupt state to all disabled */ + r600_disable_interrupt_state(rdev); return 0; + } if (ASIC_IS_DCE3(rdev)) { hpd1 = RREG32(DC_HPD1_INT_CONTROL) & ~DC_HPDx_INT_EN; @@ -2692,6 +2696,8 @@ int r600_irq_process(struct radeon_device *rdev) bool queue_hotplug = false; DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr); + if (!rdev->ih.enabled) + return IRQ_NONE; spin_lock_irqsave(&rdev->ih.lock, flags); From 7924e5eb8fe422d6b1ce3b3e2be749a480dfcdd9 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 15 Jan 2010 14:44:39 +0100 Subject: [PATCH 1251/1626] drm/radeon/kms: r600 handle irq vector ring overflow In some rare case i faced an irq overflow quickly followed by a GPU lockup (hard hang) this patch try to deal with irq vector ring overflow, so far haven't been able to reproduce it with the patch. Signed-off-by: Jerome Glisse Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 0f9a8c6788a3..bb9115bdc3a2 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2648,9 +2648,13 @@ static inline u32 r600_get_ih_wptr(struct radeon_device *rdev) wptr = RREG32(IH_RB_WPTR); if (wptr & RB_OVERFLOW) { - WARN_ON(1); - /* XXX deal with overflow */ - DRM_ERROR("IH RB overflow\n"); + /* When a ring buffer overflow happen start parsing interrupt + * from the last not overwritten vector (wptr + 16). Hopefully + * this should allow us to catchup. + */ + dev_warn(rdev->dev, "IH ring buffer overflow (0x%08X, %d, %d)\n", + wptr, rdev->ih.rptr, (wptr + 16) + rdev->ih.ptr_mask); + rdev->ih.rptr = (wptr + 16) & rdev->ih.ptr_mask; tmp = RREG32(IH_RB_CNTL); tmp |= IH_WPTR_OVERFLOW_CLEAR; WREG32(IH_RB_CNTL, tmp); From 7e71c9e2e7704ebf044d4a964e02fbd2098a173f Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Sun, 17 Jan 2010 21:21:41 +0100 Subject: [PATCH 1252/1626] drm/radeon/kms: Forbid creation of framebuffer with no valid GEM object This will avoid oops if at later point the fb is use. Trying to create a framebuffer with no valid GEM object is bogus and should be forbidden as this patch does. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 49f3c69cf240..f899320f0a6b 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -715,7 +715,11 @@ radeon_user_framebuffer_create(struct drm_device *dev, struct drm_gem_object *obj; obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handle); - + if (obj == NULL) { + dev_err(&dev->pdev->dev, "No GEM object associated to handle 0x%08X, " + "can't create framebuffer\n", mode_cmd->handle); + return NULL; + } return radeon_framebuffer_create(dev, mode_cmd, obj); } From db96380ea26fcc31ab37189aedeabd12894b1431 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Sun, 17 Jan 2010 21:21:56 +0100 Subject: [PATCH 1253/1626] drm/radeon/kms: r600/r700 don't test ib if ib initialization fails If ib initialization failed don't try to test ib as it will result in an oops (accessing NULL ib buffer ptr). Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 13 +++++++------ drivers/gpu/drm/radeon/rv770.c | 13 +++++++------ 2 files changed, 14 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index bb9115bdc3a2..d0bd117a463a 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2064,13 +2064,14 @@ int r600_init(struct radeon_device *rdev) if (rdev->accel_working) { r = radeon_ib_pool_init(rdev); if (r) { - DRM_ERROR("radeon: failed initializing IB pool (%d).\n", r); - rdev->accel_working = false; - } - r = r600_ib_test(rdev); - if (r) { - DRM_ERROR("radeon: failed testing IB (%d).\n", r); + dev_err(rdev->dev, "IB initialization failed (%d).\n", r); rdev->accel_working = false; + } else { + r = r600_ib_test(rdev); + if (r) { + dev_err(rdev->dev, "IB test failed (%d).\n", r); + rdev->accel_working = false; + } } } diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index c8cf2bc2b911..cf8f2b17d627 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -1075,13 +1075,14 @@ int rv770_init(struct radeon_device *rdev) if (rdev->accel_working) { r = radeon_ib_pool_init(rdev); if (r) { - DRM_ERROR("radeon: failed initializing IB pool (%d).\n", r); - rdev->accel_working = false; - } - r = r600_ib_test(rdev); - if (r) { - DRM_ERROR("radeon: failed testing IB (%d).\n", r); + dev_err(rdev->dev, "IB initialization failed (%d).\n", r); rdev->accel_working = false; + } else { + r = r600_ib_test(rdev); + if (r) { + dev_err(rdev->dev, "IB test failed (%d).\n", r); + rdev->accel_working = false; + } } } return 0; From c8c15ff1e90bfc4a2db1ba77a01b3b2783e723fc Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Mon, 18 Jan 2010 13:01:36 +0100 Subject: [PATCH 1254/1626] drm/radeon: r6xx/r7xx possible security issue, system ram access This patch workaround a possible security issue which can allow user to abuse drm on r6xx/r7xx hw to access any system ram memory. This patch doesn't break userspace, it detect "valid" old use of CB_COLOR[0-7]_FRAG & CB_COLOR[0-7]_TILE registers and overwritte the address these registers are pointing to with the one of the last color buffer. This workaround will work for old mesa & xf86-video-ati and any old user which did use similar register programming pattern as those (we expect that there is no others user of those ioctl except possibly a malicious one). This patch add a warning if it detects such usage, warning encourage people to update their mesa & xf86-video-ati. New userspace will submit proper relocation. Fix for xf86-video-ati / mesa (this kernel patch is enough to prevent abuse, fix for userspace are to set proper cs stream and avoid kernel warning) : http://cgit.freedesktop.org/xorg/driver/xf86-video-ati/commit/?id=95d63e408cc88b6934bec84a0b1ef94dfe8bee7b http://cgit.freedesktop.org/mesa/mesa/commit/?id=46dc6fd3ed5ef96cda53641a97bc68c3bc104a9f Abusing this register to perform system ram memory is not easy, here is outline on how it could be achieve. First attacker must have access to the drm device and be able to submit command stream throught cs ioctl. Then attacker must build a proper command stream for r6xx/r7xx hw which will abuse the FRAG or TILE buffer to overwrite the GPU GART which is in VRAM. To achieve so attacker as to setup CB_COLOR[0-7]_FRAG or CB_COLOR[0-7]_TILE to point to the GPU GART, then it has to find a way to write predictable value into those buffer (with little cleverness i believe this can be done but this is an hard task). Once attacker have such program it can overwritte GPU GART to program GPU gart to point anywhere in system memory. It then can reusse same method as he used to reprogram GART to overwritte the system ram through the GART mapping. In the process the attacker has to be carefull to not overwritte any sensitive area of the GART table, like ring or IB gart entry as it will more then likely lead to GPU lockup. Bottom line is that i think it's very hard to use this flaw to get system ram access but in theory one can achieve so. Side note: I am not aware of anyone ever using the GPU as an attack vector, nevertheless we take great care in the opensource driver to try to detect and forbid malicious use of GPU. I don't think the closed source driver are as cautious as we are. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_cs.c | 83 ++++++++++++++++++++++++++++++ drivers/gpu/drm/radeon/r600d.h | 25 +++++++++ drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_cs.c | 1 + 4 files changed, 110 insertions(+) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 44060b92d9e6..9cc4ba8d03d5 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -36,6 +36,10 @@ static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p, typedef int (*next_reloc_t)(struct radeon_cs_parser*, struct radeon_cs_reloc**); static next_reloc_t r600_cs_packet_next_reloc = &r600_cs_packet_next_reloc_mm; +struct r600_cs_track { + u32 cb_color0_base_last; +}; + /** * r600_cs_packet_parse() - parse cp packet and point ib index to next packet * @parser: parser structure holding parsing context. @@ -176,6 +180,28 @@ static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p, return 0; } +/** + * r600_cs_packet_next_is_pkt3_nop() - test if next packet is packet3 nop for reloc + * @parser: parser structure holding parsing context. + * + * Check next packet is relocation packet3, do bo validation and compute + * GPU offset using the provided start. + **/ +static inline int r600_cs_packet_next_is_pkt3_nop(struct radeon_cs_parser *p) +{ + struct radeon_cs_packet p3reloc; + int r; + + r = r600_cs_packet_parse(p, &p3reloc, p->idx); + if (r) { + return 0; + } + if (p3reloc.type != PACKET_TYPE3 || p3reloc.opcode != PACKET3_NOP) { + return 0; + } + return 1; +} + /** * r600_cs_packet_next_vline() - parse userspace VLINE packet * @parser: parser structure holding parsing context. @@ -337,6 +363,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, struct radeon_cs_packet *pkt) { struct radeon_cs_reloc *reloc; + struct r600_cs_track *track; volatile u32 *ib; unsigned idx; unsigned i; @@ -344,6 +371,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, int r; u32 idx_value; + track = (struct r600_cs_track *)p->track; ib = p->ib->ptr; idx = pkt->idx + 1; idx_value = radeon_get_ib_value(p, idx); @@ -503,9 +531,60 @@ static int r600_packet3_check(struct radeon_cs_parser *p, for (i = 0; i < pkt->count; i++) { reg = start_reg + (4 * i); switch (reg) { + /* This register were added late, there is userspace + * which does provide relocation for those but set + * 0 offset. In order to avoid breaking old userspace + * we detect this and set address to point to last + * CB_COLOR0_BASE, note that if userspace doesn't set + * CB_COLOR0_BASE before this register we will report + * error. Old userspace always set CB_COLOR0_BASE + * before any of this. + */ + case R_0280E0_CB_COLOR0_FRAG: + case R_0280E4_CB_COLOR1_FRAG: + case R_0280E8_CB_COLOR2_FRAG: + case R_0280EC_CB_COLOR3_FRAG: + case R_0280F0_CB_COLOR4_FRAG: + case R_0280F4_CB_COLOR5_FRAG: + case R_0280F8_CB_COLOR6_FRAG: + case R_0280FC_CB_COLOR7_FRAG: + case R_0280C0_CB_COLOR0_TILE: + case R_0280C4_CB_COLOR1_TILE: + case R_0280C8_CB_COLOR2_TILE: + case R_0280CC_CB_COLOR3_TILE: + case R_0280D0_CB_COLOR4_TILE: + case R_0280D4_CB_COLOR5_TILE: + case R_0280D8_CB_COLOR6_TILE: + case R_0280DC_CB_COLOR7_TILE: + if (!r600_cs_packet_next_is_pkt3_nop(p)) { + if (!track->cb_color0_base_last) { + dev_err(p->dev, "Broken old userspace ? no cb_color0_base supplied before trying to write 0x%08X\n", reg); + return -EINVAL; + } + ib[idx+1+i] = track->cb_color0_base_last; + printk_once(KERN_WARNING "You have old & broken userspace " + "please consider updating mesa & xf86-video-ati\n"); + } else { + r = r600_cs_packet_next_reloc(p, &reloc); + if (r) { + dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg); + return -EINVAL; + } + ib[idx+1+i] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); + } + break; case DB_DEPTH_BASE: case DB_HTILE_DATA_BASE: case CB_COLOR0_BASE: + r = r600_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("bad SET_CONTEXT_REG " + "0x%04X\n", reg); + return -EINVAL; + } + ib[idx+1+i] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); + track->cb_color0_base_last = ib[idx+1+i]; + break; case CB_COLOR1_BASE: case CB_COLOR2_BASE: case CB_COLOR3_BASE: @@ -678,8 +757,11 @@ static int r600_packet3_check(struct radeon_cs_parser *p, int r600_cs_parse(struct radeon_cs_parser *p) { struct radeon_cs_packet pkt; + struct r600_cs_track *track; int r; + track = kzalloc(sizeof(*track), GFP_KERNEL); + p->track = track; do { r = r600_cs_packet_parse(p, &pkt, p->idx); if (r) { @@ -757,6 +839,7 @@ int r600_cs_legacy(struct drm_device *dev, void *data, struct drm_file *filp, /* initialize parser */ memset(&parser, 0, sizeof(struct radeon_cs_parser)); parser.filp = filp; + parser.dev = &dev->pdev->dev; parser.rdev = NULL; parser.family = family; parser.ib = &fake_ib; diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index 05894edadab4..30480881aed1 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -882,4 +882,29 @@ #define S_000E60_SOFT_RESET_VMC(x) (((x) & 1) << 17) #define R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL 0x5480 + +#define R_0280E0_CB_COLOR0_FRAG 0x0280E0 +#define S_0280E0_BASE_256B(x) (((x) & 0xFFFFFFFF) << 0) +#define G_0280E0_BASE_256B(x) (((x) >> 0) & 0xFFFFFFFF) +#define C_0280E0_BASE_256B 0x00000000 +#define R_0280E4_CB_COLOR1_FRAG 0x0280E4 +#define R_0280E8_CB_COLOR2_FRAG 0x0280E8 +#define R_0280EC_CB_COLOR3_FRAG 0x0280EC +#define R_0280F0_CB_COLOR4_FRAG 0x0280F0 +#define R_0280F4_CB_COLOR5_FRAG 0x0280F4 +#define R_0280F8_CB_COLOR6_FRAG 0x0280F8 +#define R_0280FC_CB_COLOR7_FRAG 0x0280FC +#define R_0280C0_CB_COLOR0_TILE 0x0280C0 +#define S_0280C0_BASE_256B(x) (((x) & 0xFFFFFFFF) << 0) +#define G_0280C0_BASE_256B(x) (((x) >> 0) & 0xFFFFFFFF) +#define C_0280C0_BASE_256B 0x00000000 +#define R_0280C4_CB_COLOR1_TILE 0x0280C4 +#define R_0280C8_CB_COLOR2_TILE 0x0280C8 +#define R_0280CC_CB_COLOR3_TILE 0x0280CC +#define R_0280D0_CB_COLOR4_TILE 0x0280D0 +#define R_0280D4_CB_COLOR5_TILE 0x0280D4 +#define R_0280D8_CB_COLOR6_TILE 0x0280D8 +#define R_0280DC_CB_COLOR7_TILE 0x0280DC + + #endif diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 09c655f3843b..f7df1a7e4413 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -464,6 +464,7 @@ struct radeon_cs_chunk { }; struct radeon_cs_parser { + struct device *dev; struct radeon_device *rdev; struct drm_file *filp; /* chunks */ diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index 65590a0f1d93..1496cb8658ef 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -231,6 +231,7 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) memset(&parser, 0, sizeof(struct radeon_cs_parser)); parser.filp = filp; parser.rdev = rdev; + parser.dev = rdev->dev; r = radeon_cs_parser_init(&parser, data); if (r) { DRM_ERROR("Failed to initialize parser !\n"); From f776c5ec4690b21b3668ad5956774a22c86f541a Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 18 Jan 2010 14:36:12 +0100 Subject: [PATCH 1255/1626] driver-core: fix devtmpfs crash on s390 On Mon, Jan 18, 2010 at 05:26:20PM +0530, Sachin Sant wrote: > Hello Heiko, > > Today while trying to boot next-20100118 i came across > the following Oops : > > Brought up 4 CPUs > Unable to handle kernel pointer dereference at virtual kernel address 0000000000 > 543000 > Oops: 0004 #1 SMP > Modules linked in: > CPU: 0 Not tainted 2.6.33-rc4-autotest-next-20100118-5-default #1 > Process swapper (pid: 1, task: 00000000fd792038, ksp: 00000000fd797a30) > Krnl PSW : 0704200180000000 00000000001eb0b8 (shmem_parse_options+0xc0/0x328) > R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 > Krnl GPRS: 000000000054388a 000000000000003d 0000000000543836 000000000000003d > 0000000000000000 0000000000483f28 0000000000536112 00000000fd797d00 > 00000000fd4ba100 0000000000000100 0000000000483978 0000000000543832 > 0000000000000000 0000000000465958 00000000001eb0b0 00000000fd797c58 > Krnl Code: 00000000001eb0aa: c0e5000994f1 brasl %r14,31da8c > 00000000001eb0b0: b9020022 ltgr %r2,%r2 > 00000000001eb0b4: a784010b brc 8,1eb2ca > >00000000001eb0b8: 92002000 mvi 0(%r2),0 > 00000000001eb0bc: a7080000 lhi %r0,0 > 00000000001eb0c0: 41902001 la %r9,1(%r2) > 00000000001eb0c4: b9040016 lgr %r1,%r6 > 00000000001eb0c8: b904002b lgr %r2,%r11 > Call Trace: > (<00000000fd797c50> 0xfd797c50) > <00000000001eb5da> shmem_fill_super+0x13a/0x25c > <0000000000228cfa> get_sb_single+0xbe/0xdc > <000000000034ffc0> dev_get_sb+0x2c/0x38 > <000000000066c602> devtmpfs_init+0x46/0xc0 > <000000000066c53e> driver_init+0x22/0x60 > <000000000064d40a> kernel_init+0x24e/0x3d0 > <000000000010a7ea> kernel_thread_starter+0x6/0xc > <000000000010a7e4> kernel_thread_starter+0x0/0xc > > I never tried to boot a kernel with DEVTMPFS enabled on a s390 box. > So am wondering if this is supported or not ? If you think this > is supported i will send a mail to community on this. There is nothing arch specific to devtmpfs. This part crashes because the kernel tries to modify the data read-only section which is write protected on s390. Signed-off-by: Heiko Carstens Acked-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/devtmpfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c index 090dd4851301..42ae452b36b0 100644 --- a/drivers/base/devtmpfs.c +++ b/drivers/base/devtmpfs.c @@ -354,6 +354,7 @@ int __init devtmpfs_init(void) { int err; struct vfsmount *mnt; + char options[] = "mode=0755"; err = register_filesystem(&dev_fs_type); if (err) { @@ -362,7 +363,7 @@ int __init devtmpfs_init(void) return err; } - mnt = kern_mount_data(&dev_fs_type, "mode=0755"); + mnt = kern_mount_data(&dev_fs_type, options); if (IS_ERR(mnt)) { err = PTR_ERR(mnt); printk(KERN_ERR "devtmpfs: unable to create devtmpfs %i\n", err); From bd796671f093d5b1841d383674d5650f5ec6c9c6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 19 Jan 2010 13:08:16 -0800 Subject: [PATCH 1256/1626] Revert "sysdev: fix prototype for memory_sysdev_class show/store functions" This reverts commit 8ff410daa009c4b44be445ded5b0cec00abc0426 It should not have been sent to Linus's tree yet, as it depends on changes that are queued up in my driver-core for the .34 kernel merge. Cc: Wu Fengguang Cc: Andi Kleen Cc: "Zheng, Shaohui" Cc: Andrew Morton Cc: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- drivers/base/memory.c | 32 ++++++++++++-------------------- 1 file changed, 12 insertions(+), 20 deletions(-) diff --git a/drivers/base/memory.c b/drivers/base/memory.c index ae6b6c43cff9..bd025059711f 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -309,19 +309,17 @@ static SYSDEV_ATTR(removable, 0444, show_mem_removable, NULL); * Block size attribute stuff */ static ssize_t -print_block_size(struct sysdev_class *class, - struct sysdev_class_attribute *class_attr, - char *buf) +print_block_size(struct class *class, char *buf) { return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE); } -static SYSDEV_CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL); +static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL); static int block_size_init(void) { return sysfs_create_file(&memory_sysdev_class.kset.kobj, - &attr_block_size_bytes.attr); + &class_attr_block_size_bytes.attr); } /* @@ -332,9 +330,7 @@ static int block_size_init(void) */ #ifdef CONFIG_ARCH_MEMORY_PROBE static ssize_t -memory_probe_store(struct sysdev_class *class, - struct sysdev_class_attribute *class_attr, - const char *buf, size_t count) +memory_probe_store(struct class *class, const char *buf, size_t count) { u64 phys_addr; int nid; @@ -350,12 +346,12 @@ memory_probe_store(struct sysdev_class *class, return count; } -static SYSDEV_CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store); +static CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store); static int memory_probe_init(void) { return sysfs_create_file(&memory_sysdev_class.kset.kobj, - &attr_probe.attr); + &class_attr_probe.attr); } #else static inline int memory_probe_init(void) @@ -371,9 +367,7 @@ static inline int memory_probe_init(void) /* Soft offline a page */ static ssize_t -store_soft_offline_page(struct sysdev_class *class, - struct sysdev_class_attribute *class_attr, - const char *buf, size_t count) +store_soft_offline_page(struct class *class, const char *buf, size_t count) { int ret; u64 pfn; @@ -390,9 +384,7 @@ store_soft_offline_page(struct sysdev_class *class, /* Forcibly offline a page, including killing processes. */ static ssize_t -store_hard_offline_page(struct sysdev_class *class, - struct sysdev_class_attribute *class_attr, - const char *buf, size_t count) +store_hard_offline_page(struct class *class, const char *buf, size_t count) { int ret; u64 pfn; @@ -405,18 +397,18 @@ store_hard_offline_page(struct sysdev_class *class, return ret ? ret : count; } -static SYSDEV_CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page); -static SYSDEV_CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page); +static CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page); +static CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page); static __init int memory_fail_init(void) { int err; err = sysfs_create_file(&memory_sysdev_class.kset.kobj, - &attr_soft_offline_page.attr); + &class_attr_soft_offline_page.attr); if (!err) err = sysfs_create_file(&memory_sysdev_class.kset.kobj, - &attr_hard_offline_page.attr); + &class_attr_hard_offline_page.attr); return err; } #else From 3f00171125384b46e5088b7d7a5d0b3e6972f1ee Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sun, 10 Jan 2010 23:29:16 +0900 Subject: [PATCH 1257/1626] compat_ioctl: Supress "unknown cmd" message on serial /dev/console After the commit fb07a5f8 ("compat_ioctl: remove all VT ioctl handling"), I got this error message on 64-bit mips kernel with 32-bit busybox userland: ioctl32(init:1): Unknown cmd fd(0) cmd(00005600){t:'V';sz:0} arg(7fd76480) on /dev/console The cmd 5600 is VT_OPENQRY. The busybox's init issues this ioctl to know vt-console or serial-console. If the console was serial console, VT ioctls are not handled by the serial driver. And by quick search, I found some programs using VT_GETMODE to check vt-console is available or not. Signed-off-by: Atsushi Nemoto Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- fs/compat_ioctl.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 332dd00f0894..c5c45de1a2ee 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -1005,6 +1005,9 @@ COMPATIBLE_IOCTL(SCSI_IOCTL_SEND_COMMAND) COMPATIBLE_IOCTL(SCSI_IOCTL_PROBE_HOST) COMPATIBLE_IOCTL(SCSI_IOCTL_GET_PCI) #endif +/* Big V (don't complain on serial console) */ +IGNORE_IOCTL(VT_OPENQRY) +IGNORE_IOCTL(VT_GETMODE) /* Little p (/dev/rtc, /dev/envctrl, etc.) */ COMPATIBLE_IOCTL(RTC_AIE_ON) COMPATIBLE_IOCTL(RTC_AIE_OFF) From eeec32a731631a9bad9abb21c626b9f2840bee0d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Jan 2010 16:26:50 +0000 Subject: [PATCH 1258/1626] nozomi: quick fix for the close/close bug Nozomi goes wrong if you get the sequence open open close [stuff] close which turns out to occur on some ppp type setups. This is a quick patch up for the problem. It's not really fixing Nozomi which completely fails to implement tty open/close semantics and all the other needed stuff. Doing it right is a rather more invasive patch set and not one that will backport. Signed-off-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/char/nozomi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 7d73cd430340..2ad7d37afbd0 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -1651,10 +1651,10 @@ static void ntty_close(struct tty_struct *tty, struct file *file) dc->open_ttys--; port->count--; - tty_port_tty_set(port, NULL); if (port->count == 0) { DBG1("close: %d", nport->token_dl); + tty_port_tty_set(port, NULL); spin_lock_irqsave(&dc->spin_mutex, flags); dc->last_ier &= ~(nport->token_dl); writew(dc->last_ier, dc->reg_ier); From 6d34855d9aa281f72c533ecb827405139d1b0fe9 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 9 Dec 2009 12:31:37 -0800 Subject: [PATCH 1259/1626] serial: 8250_pnp: use wildcard for serial Wacom tablets Wacom claims that the WACF namespace will always be devoted to serial Wacom tablets. Remove the existing entries and add a wildcard to avoid having to update the kernel every time they add a new device. Signed-off-by: Ping Cheng Signed-off-by: Matthew Garrett Tested-by: Ping Cheng Cc: Alan Cox Signed-off-by: Andrew Morton Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/serial/8250_pnp.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index b5496a19d967..24485cc62ff8 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -328,15 +328,7 @@ static const struct pnp_device_id pnp_dev_table[] = { /* U.S. Robotics 56K Voice INT PnP*/ { "USR9190", 0 }, /* Wacom tablets */ - { "WACF004", 0 }, - { "WACF005", 0 }, - { "WACF006", 0 }, - { "WACF007", 0 }, - { "WACF008", 0 }, - { "WACF009", 0 }, - { "WACF00A", 0 }, - { "WACF00B", 0 }, - { "WACF00C", 0 }, + { "WACFXXX", 0 }, /* Compaq touchscreen */ { "FPI2002", 0 }, /* Fujitsu Stylistic touchscreens */ From 4547be7809a3b775ce750ec7f8b5748954741523 Mon Sep 17 00:00:00 2001 From: Stanislav Brabec Date: Wed, 2 Dec 2009 16:20:56 +0100 Subject: [PATCH 1260/1626] serial-core: resume serial hardware with no_console_suspend Perform a tricky suspend/resume even with no_console_suspend. With no_console_suspend, kernel skips serial port suspend/resume and the serial hardware may remain in undefined state after resume. It actually happens on devices that don't have BIOS that handle serial initialization. It makes impossible to use serial console after resume. Devices affected by this problem include: Sharp Zaurus devices Several PXA based ARM embedded boards The patch does: - Save the hardware state - Perform buffer flush in time of its suspend call - Tell the driver that port is suspended - But still accept new data - And keep console hardware in state that allows to send them It allows to capture late console messages without breaking console after resume. This is just a resend of a patch discussed in these threads, as the patch was not yet applied. "Possible suspend/resume regression in .32-rc?" (Nov 1-5, 2009, ARM list, later LKML) "serial-core: resume serial hardware with no_console_suspend" (Sep 15-Oct 18, 2009, LKML & ARM lists) Signed-off-by: Stanislav Brabec Tested-by: Haojian Zhuang Tested-by: Daniel Mack Signed-off-by: Greg Kroah-Hartman --- drivers/serial/serial_core.c | 88 ++++++++++++++---------------------- 1 file changed, 33 insertions(+), 55 deletions(-) diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 047530b285bb..fa4f170f2e86 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -2006,12 +2006,6 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) mutex_lock(&port->mutex); - if (!console_suspend_enabled && uart_console(uport)) { - /* we're going to avoid suspending serial console */ - mutex_unlock(&port->mutex); - return 0; - } - tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (device_may_wakeup(tty_dev)) { enable_irq_wake(uport->irq); @@ -2019,20 +2013,23 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) mutex_unlock(&port->mutex); return 0; } - uport->suspended = 1; + if (console_suspend_enabled || !uart_console(uport)) + uport->suspended = 1; if (port->flags & ASYNC_INITIALIZED) { const struct uart_ops *ops = uport->ops; int tries; - set_bit(ASYNCB_SUSPENDED, &port->flags); - clear_bit(ASYNCB_INITIALIZED, &port->flags); + if (console_suspend_enabled || !uart_console(uport)) { + set_bit(ASYNCB_SUSPENDED, &port->flags); + clear_bit(ASYNCB_INITIALIZED, &port->flags); - spin_lock_irq(&uport->lock); - ops->stop_tx(uport); - ops->set_mctrl(uport, 0); - ops->stop_rx(uport); - spin_unlock_irq(&uport->lock); + spin_lock_irq(&uport->lock); + ops->stop_tx(uport); + ops->set_mctrl(uport, 0); + ops->stop_rx(uport); + spin_unlock_irq(&uport->lock); + } /* * Wait for the transmitter to empty. @@ -2047,16 +2044,18 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) drv->dev_name, drv->tty_driver->name_base + uport->line); - ops->shutdown(uport); + if (console_suspend_enabled || !uart_console(uport)) + ops->shutdown(uport); } /* * Disable the console device before suspending. */ - if (uart_console(uport)) + if (console_suspend_enabled && uart_console(uport)) console_stop(uport->cons); - uart_change_pm(state, 3); + if (console_suspend_enabled || !uart_console(uport)) + uart_change_pm(state, 3); mutex_unlock(&port->mutex); @@ -2073,29 +2072,6 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) mutex_lock(&port->mutex); - if (!console_suspend_enabled && uart_console(uport)) { - /* no need to resume serial console, it wasn't suspended */ - /* - * First try to use the console cflag setting. - */ - memset(&termios, 0, sizeof(struct ktermios)); - termios.c_cflag = uport->cons->cflag; - /* - * If that's unset, use the tty termios setting. - */ - if (termios.c_cflag == 0) - termios = *state->port.tty->termios; - else { - termios.c_ispeed = termios.c_ospeed = - tty_termios_input_baud_rate(&termios); - termios.c_ispeed = termios.c_ospeed = - tty_termios_baud_rate(&termios); - } - uport->ops->set_termios(uport, &termios, NULL); - mutex_unlock(&port->mutex); - return 0; - } - tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (!uport->suspended && device_may_wakeup(tty_dev)) { disable_irq_wake(uport->irq); @@ -2121,21 +2097,23 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) spin_lock_irq(&uport->lock); ops->set_mctrl(uport, 0); spin_unlock_irq(&uport->lock); - ret = ops->startup(uport); - if (ret == 0) { - uart_change_speed(state, NULL); - spin_lock_irq(&uport->lock); - ops->set_mctrl(uport, uport->mctrl); - ops->start_tx(uport); - spin_unlock_irq(&uport->lock); - set_bit(ASYNCB_INITIALIZED, &port->flags); - } else { - /* - * Failed to resume - maybe hardware went away? - * Clear the "initialized" flag so we won't try - * to call the low level drivers shutdown method. - */ - uart_shutdown(state); + if (console_suspend_enabled || !uart_console(uport)) { + ret = ops->startup(uport); + if (ret == 0) { + uart_change_speed(state, NULL); + spin_lock_irq(&uport->lock); + ops->set_mctrl(uport, uport->mctrl); + ops->start_tx(uport); + spin_unlock_irq(&uport->lock); + set_bit(ASYNCB_INITIALIZED, &port->flags); + } else { + /* + * Failed to resume - maybe hardware went away? + * Clear the "initialized" flag so we won't try + * to call the low level drivers shutdown method. + */ + uart_shutdown(state); + } } clear_bit(ASYNCB_SUSPENDED, &port->flags); From 16ae2a877bf4179737921235e85ceffd7b79354f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Jan 2010 16:26:21 +0000 Subject: [PATCH 1261/1626] serial: Fix crash if the minimum rate of the device is > 9600 baud In that situation if the old rate is invalid and the new rate is invalid and the chip cannot do 9600 baud we report zero, which makes all the drivers explode. Instead force the rate based on min/max Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/serial/serial_core.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index fa4f170f2e86..7f2830709512 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -385,13 +385,20 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, } /* - * As a last resort, if the quotient is zero, - * default to 9600 bps + * As a last resort, if the range cannot be met then clip to + * the nearest chip supported rate. */ - if (!hung_up) - tty_termios_encode_baud_rate(termios, 9600, 9600); + if (!hung_up) { + if (baud <= min) + tty_termios_encode_baud_rate(termios, + min + 1, min + 1); + else + tty_termios_encode_baud_rate(termios, + max - 1, max - 1); + } } - + /* Should never happen */ + WARN_ON(1); return 0; } From 2e2eb509aa7a333fe9931cf306fc7dbc3473f25b Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 9 Dec 2009 12:31:36 -0800 Subject: [PATCH 1262/1626] serial: imx: bit &/| confusion MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since UCR1_UARTEN is defined 1, the port was always treated as enabled. Signed-off-by: Roel Kluin Cc: Alan Cox Acked-by: Oskar Schirmer Cc: Sascha Hauer Cc: Fabian Godehardt Cc: Daniel Glöckner Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 18130f11238e..60d665a17a88 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1088,7 +1088,7 @@ imx_console_get_options(struct imx_port *sport, int *baud, int *parity, int *bits) { - if ( readl(sport->port.membase + UCR1) | UCR1_UARTEN ) { + if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) { /* ok, the port was enabled */ unsigned int ucr2, ubir,ubmr, uartclk; unsigned int baud_raw; From 18c576f950167ff3ec1e56dcbbec7b87288b3237 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 9 Dec 2009 12:31:31 -0800 Subject: [PATCH 1263/1626] serial: serial_cs: oxsemi quirk breaks resume Quirk is applied on all cards with given manfid (is it that correct?). Unfortunately, that quirk breaks resume on zaurus with billionton bluetooth card inserted: c950ctrl is 0 and outb() faults. I believe it is simply not a multiport card. (info->multi == 1). ... ... confirmed by printks. Signed-off-by: Pavel Machek Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/serial_cs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 0ee7239c5d69..df854401af2d 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -146,7 +146,8 @@ static void quirk_wakeup_oxsemi(struct pcmcia_device *link) { struct serial_info *info = link->priv; - outb(12, info->c950ctrl + 1); + if (info->c950ctrl) + outb(12, info->c950ctrl + 1); } /* request_region? oxsemi branch does no request_region too... */ From 703625118069f9f8960d356676662d3db5a9d116 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 17 Dec 2009 07:07:19 -0800 Subject: [PATCH 1264/1626] tty: fix race in tty_fasync We need to keep the lock held over the call to __f_setown() to prevent a PID race. Thanks to Al Viro for pointing out the problem, and to Travis for making us look here in the first place. Cc: Eric W. Biederman Cc: Al Viro Cc: Alan Cox Cc: Linus Torvalds Cc: Tavis Ormandy Cc: Jeff Dike Cc: Julien Tinnes Cc: Matt Mackall Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index f15df40bc318..c6f3b48be9dd 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1951,8 +1951,8 @@ static int tty_fasync(int fd, struct file *filp, int on) pid = task_pid(current); type = PIDTYPE_PID; } - spin_unlock_irqrestore(&tty->ctrl_lock, flags); retval = __f_setown(filp, pid, type, 0); + spin_unlock_irqrestore(&tty->ctrl_lock, flags); if (retval) goto out; } else { From 20633bf0141c5e93e3396770d5eb7d200ee4068a Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Wed, 23 Dec 2009 10:27:22 -0200 Subject: [PATCH 1265/1626] Staging: asus_oled: fix oops in 2.6.32.2 After updating to 2.6.32 kernel, I started experiencing Oopses caused by the asus_oled module. After quick investigation, I wrapped this simple patch which fixes an Oops in by asus_oled module on 2.6.32.2 kernel, caused by incorrect usage of strict_strtoul function call within set_enabled and set_disabled functions. This can be triggered by simple running the userspace client for asus_old (e.g., 'asusoled -e' or 'asusoled -d'). Signed-off-by: Eugeni Dodonov Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/asus_oled/asus_oled.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c index f4c26572c7df..43c57b7688ab 100644 --- a/drivers/staging/asus_oled/asus_oled.c +++ b/drivers/staging/asus_oled/asus_oled.c @@ -194,9 +194,11 @@ static ssize_t set_enabled(struct device *dev, struct device_attribute *attr, { struct usb_interface *intf = to_usb_interface(dev); struct asus_oled_dev *odev = usb_get_intfdata(intf); - int temp = strict_strtoul(buf, 10, NULL); + unsigned long value; + if (strict_strtoul(buf, 10, &value)) + return -EINVAL; - enable_oled(odev, temp); + enable_oled(odev, value); return count; } @@ -207,10 +209,12 @@ static ssize_t class_set_enabled(struct device *device, { struct asus_oled_dev *odev = (struct asus_oled_dev *) dev_get_drvdata(device); + unsigned long value; - int temp = strict_strtoul(buf, 10, NULL); + if (strict_strtoul(buf, 10, &value)) + return -EINVAL; - enable_oled(odev, temp); + enable_oled(odev, value); return count; } From d31a2ff03f31cbecb92bdc5b1ab9d62fb70971d7 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 6 Jan 2010 14:01:26 +0000 Subject: [PATCH 1266/1626] Staging: et131x: Fix 2.6.33rc1 regression in et131x et131x: Fix 12bit wrapping From: Alan Cox The 12bit wrap logic conversion is wrong and this shows up for some memory sizes and layouts of card. Patch it up for now, once the kernel view of status is cleaned up it'll become two variables and a lot saner. Signed-off-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/et131x/et1310_address_map.h | 16 ++++++++++++---- drivers/staging/et131x/et1310_rx.c | 6 +++--- 2 files changed, 15 insertions(+), 7 deletions(-) diff --git a/drivers/staging/et131x/et1310_address_map.h b/drivers/staging/et131x/et1310_address_map.h index 6da843cc343c..e715e4dcb523 100644 --- a/drivers/staging/et131x/et1310_address_map.h +++ b/drivers/staging/et131x/et1310_address_map.h @@ -203,11 +203,14 @@ typedef struct _GLOBAL_t { /* Location: */ * 9-0: pr ndes */ -#define ET_DMA10_MASK 0x3FF /* 10 bit mask for DMA10W types */ -#define ET_DMA10_WRAP 0x400 -#define ET_DMA4_MASK 0x00F /* 4 bit mask for DMA4W types */ -#define ET_DMA4_WRAP 0x010 +#define ET_DMA12_MASK 0x0FFF /* 12 bit mask for DMA12W types */ +#define ET_DMA12_WRAP 0x1000 +#define ET_DMA10_MASK 0x03FF /* 10 bit mask for DMA10W types */ +#define ET_DMA10_WRAP 0x0400 +#define ET_DMA4_MASK 0x000F /* 4 bit mask for DMA4W types */ +#define ET_DMA4_WRAP 0x0010 +#define INDEX12(x) ((x) & ET_DMA12_MASK) #define INDEX10(x) ((x) & ET_DMA10_MASK) #define INDEX4(x) ((x) & ET_DMA4_MASK) @@ -216,6 +219,11 @@ extern inline void add_10bit(u32 *v, int n) *v = INDEX10(*v + n) | (*v & ET_DMA10_WRAP); } +extern inline void add_12bit(u32 *v, int n) +{ + *v = INDEX12(*v + n) | (*v & ET_DMA12_WRAP); +} + /* * 10bit DMA with wrap * txdma tx queue write address reg in txdma address map at 0x1010 diff --git a/drivers/staging/et131x/et1310_rx.c b/drivers/staging/et131x/et1310_rx.c index 3ddc9b12b8db..81c1a7478ad6 100644 --- a/drivers/staging/et131x/et1310_rx.c +++ b/drivers/staging/et131x/et1310_rx.c @@ -831,10 +831,10 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *etdev) /* Indicate that we have used this PSR entry. */ /* FIXME wrap 12 */ - rx_local->local_psr_full = (rx_local->local_psr_full + 1) & 0xFFF; - if (rx_local->local_psr_full > rx_local->PsrNumEntries - 1) { + add_12bit(&rx_local->local_psr_full, 1); + if ((rx_local->local_psr_full & 0xFFF) > rx_local->PsrNumEntries - 1) { /* Clear psr full and toggle the wrap bit */ - rx_local->local_psr_full &= 0xFFF; + rx_local->local_psr_full &= ~0xFFF; rx_local->local_psr_full ^= 0x1000; } From 7692fd4d441afac728cb83fdd33349d5ba07406c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 8 Jan 2010 09:06:40 -0800 Subject: [PATCH 1267/1626] Staging: hv: fix smp problems in the hyperv core code This fixes a number of SMP problems that were in the hyperv core code. Patch originally written by K. Y. Srinivasan but forward ported to the latest in-kernel code and tweaked slightly by me. Novell, Inc. hereby disclaims all copyright in any derivative work copyright associated with this patch. Signed-off-by: K. Y. Srinivasan Cc: Hank Janssen Cc: Haiyang Zhang . Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/Hv.c | 50 +++++++++++++++++++------------------- drivers/staging/hv/Hv.h | 6 ++--- drivers/staging/hv/Vmbus.c | 12 +++++---- 3 files changed, 35 insertions(+), 33 deletions(-) diff --git a/drivers/staging/hv/Hv.c b/drivers/staging/hv/Hv.c index c5b6613f2f2f..c2809f2a2ce0 100644 --- a/drivers/staging/hv/Hv.c +++ b/drivers/staging/hv/Hv.c @@ -386,7 +386,7 @@ u16 HvSignalEvent(void) * retrieve the initialized message and event pages. Otherwise, we create and * initialize the message and event pages. */ -int HvSynicInit(u32 irqVector) +void HvSynicInit(void *irqarg) { u64 version; union hv_synic_simp simp; @@ -394,13 +394,14 @@ int HvSynicInit(u32 irqVector) union hv_synic_sint sharedSint; union hv_synic_scontrol sctrl; u64 guestID; - int ret = 0; + u32 irqVector = *((u32 *)(irqarg)); + int cpu = smp_processor_id(); DPRINT_ENTER(VMBUS); if (!gHvContext.HypercallPage) { DPRINT_EXIT(VMBUS); - return ret; + return; } /* Check the version */ @@ -425,27 +426,27 @@ int HvSynicInit(u32 irqVector) */ rdmsrl(HV_X64_MSR_GUEST_OS_ID, guestID); if (guestID == HV_LINUX_GUEST_ID) { - gHvContext.synICMessagePage[0] = + gHvContext.synICMessagePage[cpu] = phys_to_virt(simp.BaseSimpGpa << PAGE_SHIFT); - gHvContext.synICEventPage[0] = + gHvContext.synICEventPage[cpu] = phys_to_virt(siefp.BaseSiefpGpa << PAGE_SHIFT); } else { DPRINT_ERR(VMBUS, "unknown guest id!!"); goto Cleanup; } DPRINT_DBG(VMBUS, "MAPPED: Simp: %p, Sifep: %p", - gHvContext.synICMessagePage[0], - gHvContext.synICEventPage[0]); + gHvContext.synICMessagePage[cpu], + gHvContext.synICEventPage[cpu]); } else { - gHvContext.synICMessagePage[0] = osd_PageAlloc(1); - if (gHvContext.synICMessagePage[0] == NULL) { + gHvContext.synICMessagePage[cpu] = (void *)get_zeroed_page(GFP_ATOMIC); + if (gHvContext.synICMessagePage[cpu] == NULL) { DPRINT_ERR(VMBUS, "unable to allocate SYNIC message page!!"); goto Cleanup; } - gHvContext.synICEventPage[0] = osd_PageAlloc(1); - if (gHvContext.synICEventPage[0] == NULL) { + gHvContext.synICEventPage[cpu] = (void *)get_zeroed_page(GFP_ATOMIC); + if (gHvContext.synICEventPage[cpu] == NULL) { DPRINT_ERR(VMBUS, "unable to allocate SYNIC event page!!"); goto Cleanup; @@ -454,7 +455,7 @@ int HvSynicInit(u32 irqVector) /* Setup the Synic's message page */ rdmsrl(HV_X64_MSR_SIMP, simp.AsUINT64); simp.SimpEnabled = 1; - simp.BaseSimpGpa = virt_to_phys(gHvContext.synICMessagePage[0]) + simp.BaseSimpGpa = virt_to_phys(gHvContext.synICMessagePage[cpu]) >> PAGE_SHIFT; DPRINT_DBG(VMBUS, "HV_X64_MSR_SIMP msr set to: %llx", @@ -465,7 +466,7 @@ int HvSynicInit(u32 irqVector) /* Setup the Synic's event page */ rdmsrl(HV_X64_MSR_SIEFP, siefp.AsUINT64); siefp.SiefpEnabled = 1; - siefp.BaseSiefpGpa = virt_to_phys(gHvContext.synICEventPage[0]) + siefp.BaseSiefpGpa = virt_to_phys(gHvContext.synICEventPage[cpu]) >> PAGE_SHIFT; DPRINT_DBG(VMBUS, "HV_X64_MSR_SIEFP msr set to: %llx", @@ -501,32 +502,30 @@ int HvSynicInit(u32 irqVector) DPRINT_EXIT(VMBUS); - return ret; + return; Cleanup: - ret = -1; - if (gHvContext.GuestId == HV_LINUX_GUEST_ID) { - if (gHvContext.synICEventPage[0]) - osd_PageFree(gHvContext.synICEventPage[0], 1); + if (gHvContext.synICEventPage[cpu]) + osd_PageFree(gHvContext.synICEventPage[cpu], 1); - if (gHvContext.synICMessagePage[0]) - osd_PageFree(gHvContext.synICMessagePage[0], 1); + if (gHvContext.synICMessagePage[cpu]) + osd_PageFree(gHvContext.synICMessagePage[cpu], 1); } DPRINT_EXIT(VMBUS); - - return ret; + return; } /** * HvSynicCleanup - Cleanup routine for HvSynicInit(). */ -void HvSynicCleanup(void) +void HvSynicCleanup(void *arg) { union hv_synic_sint sharedSint; union hv_synic_simp simp; union hv_synic_siefp siefp; + int cpu = smp_processor_id(); DPRINT_ENTER(VMBUS); @@ -539,6 +538,7 @@ void HvSynicCleanup(void) sharedSint.Masked = 1; + /* Need to correctly cleanup in the case of SMP!!! */ /* Disable the interrupt */ wrmsrl(HV_X64_MSR_SINT0 + VMBUS_MESSAGE_SINT, sharedSint.AsUINT64); @@ -560,8 +560,8 @@ void HvSynicCleanup(void) wrmsrl(HV_X64_MSR_SIEFP, siefp.AsUINT64); - osd_PageFree(gHvContext.synICMessagePage[0], 1); - osd_PageFree(gHvContext.synICEventPage[0], 1); + osd_PageFree(gHvContext.synICMessagePage[cpu], 1); + osd_PageFree(gHvContext.synICEventPage[cpu], 1); } DPRINT_EXIT(VMBUS); diff --git a/drivers/staging/hv/Hv.h b/drivers/staging/hv/Hv.h index 5379e4bfc56e..fce4b5cdac30 100644 --- a/drivers/staging/hv/Hv.h +++ b/drivers/staging/hv/Hv.h @@ -93,7 +93,7 @@ static const struct hv_guid VMBUS_SERVICE_ID = { }, }; -#define MAX_NUM_CPUS 1 +#define MAX_NUM_CPUS 32 struct hv_input_signal_event_buffer { @@ -137,8 +137,8 @@ extern u16 HvPostMessage(union hv_connection_id connectionId, extern u16 HvSignalEvent(void); -extern int HvSynicInit(u32 irqVector); +extern void HvSynicInit(void *irqarg); -extern void HvSynicCleanup(void); +extern void HvSynicCleanup(void *arg); #endif /* __HV_H__ */ diff --git a/drivers/staging/hv/Vmbus.c b/drivers/staging/hv/Vmbus.c index a4dd06f6d459..35a023e9f9d1 100644 --- a/drivers/staging/hv/Vmbus.c +++ b/drivers/staging/hv/Vmbus.c @@ -129,7 +129,7 @@ static int VmbusOnDeviceAdd(struct hv_device *dev, void *AdditionalInfo) /* strcpy(dev->name, "vmbus"); */ /* SynIC setup... */ - ret = HvSynicInit(*irqvector); + on_each_cpu(HvSynicInit, (void *)irqvector, 1); /* Connect to VMBus in the root partition */ ret = VmbusConnect(); @@ -150,7 +150,7 @@ static int VmbusOnDeviceRemove(struct hv_device *dev) DPRINT_ENTER(VMBUS); VmbusChannelReleaseUnattachedChannels(); VmbusDisconnect(); - HvSynicCleanup(); + on_each_cpu(HvSynicCleanup, NULL, 1); DPRINT_EXIT(VMBUS); return ret; @@ -173,7 +173,8 @@ static void VmbusOnCleanup(struct hv_driver *drv) */ static void VmbusOnMsgDPC(struct hv_driver *drv) { - void *page_addr = gHvContext.synICMessagePage[0]; + int cpu = smp_processor_id(); + void *page_addr = gHvContext.synICMessagePage[cpu]; struct hv_message *msg = (struct hv_message *)page_addr + VMBUS_MESSAGE_SINT; struct hv_message *copied; @@ -230,11 +231,12 @@ static void VmbusOnEventDPC(struct hv_driver *drv) static int VmbusOnISR(struct hv_driver *drv) { int ret = 0; + int cpu = smp_processor_id(); void *page_addr; struct hv_message *msg; union hv_synic_event_flags *event; - page_addr = gHvContext.synICMessagePage[0]; + page_addr = gHvContext.synICMessagePage[cpu]; msg = (struct hv_message *)page_addr + VMBUS_MESSAGE_SINT; DPRINT_ENTER(VMBUS); @@ -248,7 +250,7 @@ static int VmbusOnISR(struct hv_driver *drv) } /* TODO: Check if there are events to be process */ - page_addr = gHvContext.synICEventPage[0]; + page_addr = gHvContext.synICEventPage[cpu]; event = (union hv_synic_event_flags *)page_addr + VMBUS_MESSAGE_SINT; /* Since we are a child, we only need to check bit 0 */ From 25719e6b4631959c9ecb1db6967537a124c4a7fa Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Tue, 5 Jan 2010 14:30:31 +0100 Subject: [PATCH 1268/1626] USB: serial: fix USB serial fix kfifo_len locking This patch fix a possible race bug in drivers/usb/serial/generic with the new kfifo API. Please apply it to the 2.6.33-rc* tree. Signed-off-by: Stefani Seibold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/generic.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index f1ea3a33b6e6..5ce033ab9b99 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -386,12 +386,12 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) dbg("%s - port %d", __func__, port->number); - if (serial->type->max_in_flight_urbs) { - spin_lock_irqsave(&port->lock, flags); + spin_lock_irqsave(&port->lock, flags); + if (serial->type->max_in_flight_urbs) chars = port->tx_bytes_flight; - spin_unlock_irqrestore(&port->lock, flags); - } else if (serial->num_bulk_out) + else if (serial->num_bulk_out) chars = kfifo_len(&port->write_fifo); + spin_unlock_irqrestore(&port->lock, flags); dbg("%s - returns %d", __func__, chars); return chars; From 2591530204a76fecc843529ade56afe865dd2657 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 6 Jan 2010 15:48:42 -0800 Subject: [PATCH 1269/1626] usb: serial: fix memory leak in generic driver Fix a regression introduced by commit 715b1dc01fe44537e8fce9566e4bb48d6821d84b ("USB: usb_debug, usb_generic_serial: implement multi urb write"). URB transfer buffer was never freed when using multi-urb writes. Currently the only driver enabling multi-urb writes is usb_debug. Signed-off-by: Johan Hovold Cc: Greg KH Acked-by: Jason Wessel Cc: stable Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/generic.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 5ce033ab9b99..83443d6306d6 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -489,6 +489,8 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb) dbg("%s - port %d", __func__, port->number); if (port->serial->type->max_in_flight_urbs) { + kfree(urb->transfer_buffer); + spin_lock_irqsave(&port->lock, flags); --port->urbs_in_flight; port->tx_bytes_flight -= urb->transfer_buffer_length; From a91b593edd4b3e8aa91f671b763b27b8119eb49d Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 22 Dec 2009 23:16:32 -0500 Subject: [PATCH 1270/1626] USB: fix bitmask merge error This patch adds a mask bit which was mistakenly omitted from the as1311 patch (usb-storage: add BAD_SENSE flag). Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/usb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 5a53d4f0dd11..e9f995486ec1 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -434,7 +434,8 @@ static void adjust_quirks(struct us_data *us) u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor); u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct); unsigned f = 0; - unsigned int mask = (US_FL_SANE_SENSE | US_FL_FIX_CAPACITY | + unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE | + US_FL_FIX_CAPACITY | US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE | US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 | US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE | From acbe2febe71abb2360b008e9ab3ee5c44169f78c Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 12 Jan 2010 12:32:50 +0100 Subject: [PATCH 1271/1626] USB: Don't use GFP_KERNEL while we cannot reset a storage device Memory allocations with GFP_KERNEL can cause IO to a storage device which can fail resulting in a need to reset the device. Therefore GFP_KERNEL cannot be safely used between usb_lock_device() and usb_unlock_device(). Replace by GFP_NOIO. Signed-off-by: Oliver Neukum Cc: stable Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devices.c | 2 +- drivers/usb/core/message.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 96f11715cd26..355dffcc23b0 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -494,7 +494,7 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, return 0; /* allocate 2^1 pages = 8K (on i386); * should be more than enough for one device */ - pages_start = (char *)__get_free_pages(GFP_KERNEL, 1); + pages_start = (char *)__get_free_pages(GFP_NOIO, 1); if (!pages_start) return -ENOMEM; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 1b994846e8e0..9bc95fec793f 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -906,11 +906,11 @@ char *usb_cache_string(struct usb_device *udev, int index) if (index <= 0) return NULL; - buf = kmalloc(MAX_USB_STRING_SIZE, GFP_KERNEL); + buf = kmalloc(MAX_USB_STRING_SIZE, GFP_NOIO); if (buf) { len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE); if (len > 0) { - smallbuf = kmalloc(++len, GFP_KERNEL); + smallbuf = kmalloc(++len, GFP_NOIO); if (!smallbuf) return buf; memcpy(smallbuf, buf, len); @@ -1731,7 +1731,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration) if (cp) { nintf = cp->desc.bNumInterfaces; new_interfaces = kmalloc(nintf * sizeof(*new_interfaces), - GFP_KERNEL); + GFP_NOIO); if (!new_interfaces) { dev_err(&dev->dev, "Out of memory\n"); return -ENOMEM; @@ -1740,7 +1740,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration) for (; n < nintf; ++n) { new_interfaces[n] = kzalloc( sizeof(struct usb_interface), - GFP_KERNEL); + GFP_NOIO); if (!new_interfaces[n]) { dev_err(&dev->dev, "Out of memory\n"); ret = -ENOMEM; From 1b9a38bfa6e664ff02511314f5586d711c83cc91 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 8 Jan 2010 11:17:55 -0500 Subject: [PATCH 1272/1626] USB: EHCI: fix handling of unusual interrupt intervals This patch (as1320) fixes two problems related to interrupt-URB scheduling in ehci-hcd. URBs with an interval of 2 or 4 microframes aren't handled. For the time being, the patch reduces to interval to 1 uframe. URBs are constrained to have an interval no larger than 1024 frames by usb_submit_urb(). But some EHCI controllers allow use of a schedule as short as 256 frames; for these controllers we may have to decrease the interval to the actual schedule length. The second problem isn't very significant since few devices expose interrupt endpoints with an interval larger than 256 frames. But the first problem is critical; it will prevent the kernel from working with devices having interrupt intervals of 2 or 4 uframes. Signed-off-by: Alan Stern Cc: stable Tested-by: Glynn Farrow Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-q.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index a427d3b00634..89521775c567 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -849,9 +849,10 @@ qh_make ( * But interval 1 scheduling is simpler, and * includes high bandwidth. */ - dbg ("intr period %d uframes, NYET!", - urb->interval); - goto done; + urb->interval = 1; + } else if (qh->period > ehci->periodic_size) { + qh->period = ehci->periodic_size; + urb->interval = qh->period << 3; } } else { int think_time; @@ -874,6 +875,10 @@ qh_make ( usb_calc_bus_time (urb->dev->speed, is_input, 0, max_packet (maxp))); qh->period = urb->interval; + if (qh->period > ehci->periodic_size) { + qh->period = ehci->periodic_size; + urb->interval = qh->period; + } } } From cec3a53c7fe794237b582e8e77fc0e48465e65ee Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 8 Jan 2010 11:18:20 -0500 Subject: [PATCH 1273/1626] USB: EHCI & UHCI: fix race between root-hub suspend and port resume This patch (as1321) fixes a problem with EHCI and UHCI root-hub suspends: If the suspend occurs while a port is trying to resume, the resume doesn't finish and simply gets lost. When remote wakeup is enabled, this is undesirable behavior. The patch checks first to see if any port resumes are in progress, and if they are then it fails the root-hub suspend with -EBUSY. Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hub.c | 20 +++++++++++++++++++- drivers/usb/host/uhci-hcd.c | 15 ++++++++++++++- 2 files changed, 33 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 2c6571c05f35..c75d9270c752 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -120,9 +120,26 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) del_timer_sync(&ehci->watchdog); del_timer_sync(&ehci->iaa_watchdog); - port = HCS_N_PORTS (ehci->hcs_params); spin_lock_irq (&ehci->lock); + /* Once the controller is stopped, port resumes that are already + * in progress won't complete. Hence if remote wakeup is enabled + * for the root hub and any ports are in the middle of a resume or + * remote wakeup, we must fail the suspend. + */ + if (hcd->self.root_hub->do_remote_wakeup) { + port = HCS_N_PORTS(ehci->hcs_params); + while (port--) { + if (ehci->reset_done[port] != 0) { + spin_unlock_irq(&ehci->lock); + ehci_dbg(ehci, "suspend failed because " + "port %d is resuming\n", + port + 1); + return -EBUSY; + } + } + } + /* stop schedules, clean any completed work */ if (HC_IS_RUNNING(hcd->state)) { ehci_quiesce (ehci); @@ -138,6 +155,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) */ ehci->bus_suspended = 0; ehci->owned_ports = 0; + port = HCS_N_PORTS(ehci->hcs_params); while (port--) { u32 __iomem *reg = &ehci->regs->port_status [port]; u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 5cd0e48f67fb..99cd00fd3514 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -749,7 +749,20 @@ static int uhci_rh_suspend(struct usb_hcd *hcd) spin_lock_irq(&uhci->lock); if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) rc = -ESHUTDOWN; - else if (!uhci->dead) + else if (uhci->dead) + ; /* Dead controllers tell no tales */ + + /* Once the controller is stopped, port resumes that are already + * in progress won't complete. Hence if remote wakeup is enabled + * for the root hub and any ports are in the middle of a resume or + * remote wakeup, we must fail the suspend. + */ + else if (hcd->self.root_hub->do_remote_wakeup && + uhci->resuming_ports) { + dev_dbg(uhci_dev(uhci), "suspend failed because a port " + "is resuming\n"); + rc = -EBUSY; + } else suspend_rh(uhci, UHCI_RH_SUSPENDED); spin_unlock_irq(&uhci->lock); return rc; From 49d0f078f494b9d81e820a13dd8093a9bfb0b6b1 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 8 Jan 2010 11:18:38 -0500 Subject: [PATCH 1274/1626] USB: add missing delay during remote wakeup This patch (as1330) fixes a bug in khbud's handling of remote wakeups. When a device sends a remote-wakeup request, the parent hub (or the host controller driver, for directly attached devices) begins the resume sequence and notifies khubd when the sequence finishes. At this point the port's SUSPEND feature is automatically turned off. However the device needs an additional 10-ms resume-recovery time (TRSMRCY in the USB spec). Khubd does not wait for this delay if the SUSPEND feature is off, and as a result some devices fail to behave properly following a remote wakeup. This patch adds the missing delay to the remote-wakeup path. It also extends the resume-signalling delay used by ehci-hcd and uhci-hcd from 20 ms (the value in the spec) to 25 ms (the value we use for non-remote-wakeup resumes). The extra time appears to help some devices. Signed-off-by: Alan Stern Cc: stable Cc: Rickard Bellini Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 3 +++ drivers/usb/host/ehci-hcd.c | 5 +++-- drivers/usb/host/uhci-hub.c | 2 +- 3 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 0cec6caf6e9b..b9f5fcd713e2 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3347,6 +3347,9 @@ static void hub_events(void) USB_PORT_FEAT_C_SUSPEND); udev = hdev->children[i-1]; if (udev) { + /* TRSMRCY = 10 msec */ + msleep(10); + usb_lock_device(udev); ret = remote_wakeup(hdev-> children[i-1]); diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 5859522d6edd..1ec3857f22e6 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -787,9 +787,10 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* start 20 msec resume signaling from this port, * and make khubd collect PORT_STAT_C_SUSPEND to - * stop that signaling. + * stop that signaling. Use 5 ms extra for safety, + * like usb_port_resume() does. */ - ehci->reset_done [i] = jiffies + msecs_to_jiffies (20); + ehci->reset_done[i] = jiffies + msecs_to_jiffies(25); ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); mod_timer(&hcd->rh_timer, ehci->reset_done[i]); } diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 885b585360b9..8270055848ca 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -167,7 +167,7 @@ static void uhci_check_ports(struct uhci_hcd *uhci) /* Port received a wakeup request */ set_bit(port, &uhci->resuming_ports); uhci->ports_timeout = jiffies + - msecs_to_jiffies(20); + msecs_to_jiffies(25); /* Make sure we see the port again * after the resuming period is over. */ From b132b04e193908a94d95065d0628f8fb0159cc55 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 14 Jan 2010 10:33:19 -0800 Subject: [PATCH 1275/1626] USB: add speed values for USB 3.0 and wireless controllers These controllers say "unknown" for their speed in sysfs, which obviously isn't correct. Reported-by: Kurt Garloff Cc: Sarah Sharp Cc: David Vrabel Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/sysfs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 485edf937f25..5f3908f6e2dc 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -115,6 +115,12 @@ show_speed(struct device *dev, struct device_attribute *attr, char *buf) case USB_SPEED_HIGH: speed = "480"; break; + case USB_SPEED_VARIABLE: + speed = "480"; + break; + case USB_SPEED_SUPER: + speed = "5000"; + break; default: speed = "unknown"; } From 04a723ea9c53ba608b0411aa36948bb57c51a08e Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 6 Jan 2010 10:16:51 -0800 Subject: [PATCH 1276/1626] USB: Fix duplicate sysfs problem after device reset. Borislav Petkov reports issues with duplicate sysfs endpoint files after a resume from a hibernate. It turns out that the code to support alternate settings under xHCI has issues when a device with a non-default alternate setting is reset during the hibernate: [ 427.681810] Restarting tasks ... [ 427.681995] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 427.682019] usb usb3: usb resume [ 427.682030] ohci_hcd 0000:00:12.0: wakeup root hub [ 427.682191] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 427.682205] usb 1-2: usb wakeup-resume [ 427.682226] usb 1-2: finish reset-resume [ 427.682886] done. [ 427.734658] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.734663] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.746682] hub 3-0:1.0: hub_reset_resume [ 427.746693] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 427.786715] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 427.839653] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.839666] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.847717] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS [ 427.915497] hub 1-2:1.0: remove_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 1 [ 427.915774] hub 1-2:1.0: remove_intf_ep_devs: bNumEndpoints: 1 [ 427.915934] hub 1-2:1.0: if: ffff88022f9e8800: endpoint devs removed. [ 427.916158] hub 1-2:1.0: create_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 0, ->unregistering: 0 [ 427.916434] hub 1-2:1.0: create_intf_ep_devs: bNumEndpoints: 1 [ 427.916609] ep_81: create, parent hub [ 427.916632] ------------[ cut here ]------------ [ 427.916644] WARNING: at fs/sysfs/dir.c:477 sysfs_add_one+0x82/0x96() [ 427.916649] Hardware name: System Product Name [ 427.916653] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/ep_81' [ 427.916658] Modules linked in: binfmt_misc kvm_amd kvm powernow_k8 cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table cpufreq_conservative ipv6 vfat fat +8250_pnp 8250 pcspkr ohci_hcd serial_core k10temp edac_core [ 427.916694] Pid: 278, comm: khubd Not tainted 2.6.33-rc2-00187-g08d869a-dirty #13 [ 427.916699] Call Trace: The problem is caused by a mismatch between the USB core's view of the device state and the USB device and xHCI host's view of the device state. After the device reset and re-configuration, the device and the xHCI host think they are using alternate setting 0 of all interfaces. However, the USB core keeps track of the old state, which may include non-zero alternate settings. It uses intf->cur_altsetting to keep the endpoint sysfs files for the old state across the reset. The bandwidth allocation functions need to know what the xHCI host thinks the current alternate settings are, so original patch set intf->cur_altsetting to the alternate setting 0. This caused duplicate endpoint files to be created. The solution is to not set intf->cur_altsetting before calling usb_set_interface() in usb_reset_and_verify_device(). Instead, we add a new flag to struct usb_interface to tell usb_hcd_alloc_bandwidth() to use alternate setting 0 as the currently installed alternate setting. Signed-off-by: Sarah Sharp Tested-by: Borislav Petkov Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 18 ++++++++++++++++++ drivers/usb/core/hub.c | 15 +++++---------- include/linux/usb.h | 1 + 3 files changed, 24 insertions(+), 10 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 0495fa651225..80995ef0868c 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1684,6 +1684,24 @@ int usb_hcd_alloc_bandwidth(struct usb_device *udev, } } if (cur_alt && new_alt) { + struct usb_interface *iface = usb_ifnum_to_if(udev, + cur_alt->desc.bInterfaceNumber); + + if (iface->resetting_device) { + /* + * The USB core just reset the device, so the xHCI host + * and the device will think alt setting 0 is installed. + * However, the USB core will pass in the alternate + * setting installed before the reset as cur_alt. Dig + * out the alternate setting 0 structure, or the first + * alternate setting if a broken device doesn't have alt + * setting 0. + */ + cur_alt = usb_altnum_to_altsetting(iface, 0); + if (!cur_alt) + cur_alt = &iface->altsetting[0]; + } + /* Drop all the endpoints in the current alt setting */ for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) { ret = hcd->driver->drop_endpoint(hcd, udev, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b9f5fcd713e2..35cc8b9ba1f5 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3695,19 +3695,14 @@ static int usb_reset_and_verify_device(struct usb_device *udev) usb_enable_interface(udev, intf, true); ret = 0; } else { - /* We've just reset the device, so it will think alt - * setting 0 is installed. For usb_set_interface() to - * work properly, we need to set the current alternate - * interface setting to 0 (or the first alt setting, if - * the device doesn't have alt setting 0). + /* Let the bandwidth allocation function know that this + * device has been reset, and it will have to use + * alternate setting 0 as the current alternate setting. */ - intf->cur_altsetting = - usb_find_alt_setting(config, i, 0); - if (!intf->cur_altsetting) - intf->cur_altsetting = - &config->intf_cache[i]->altsetting[0]; + intf->resetting_device = 1; ret = usb_set_interface(udev, desc->bInterfaceNumber, desc->bAlternateSetting); + intf->resetting_device = 0; } if (ret < 0) { dev_err(&udev->dev, "failed to restore interface %d " diff --git a/include/linux/usb.h b/include/linux/usb.h index e101a2d04d75..d7ace1b80f09 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -192,6 +192,7 @@ struct usb_interface { unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */ unsigned needs_binding:1; /* needs delayed unbind/rebind */ unsigned reset_running:1; + unsigned resetting_device:1; /* true: bandwidth alloc after reset */ struct device dev; /* interface specific device info */ struct device *usb_dev; From ae35fe9e8abe828b25053cd3efdc6953fbb710e3 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 7 Jan 2010 04:17:32 +0300 Subject: [PATCH 1277/1626] USB: FHCI: avoid NULL pointer dereference Assign fhci only if usb is not NULL. Signed-off-by: Alexander Beregalov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/fhci-hcd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 0951818ef93b..78e7c3cfcb72 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -242,9 +242,10 @@ err: static void fhci_usb_free(void *lld) { struct fhci_usb *usb = lld; - struct fhci_hcd *fhci = usb->fhci; + struct fhci_hcd *fhci; if (usb) { + fhci = usb->fhci; fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); fhci_ep0_free(usb); kfree(usb->actual_frame); From c0d74142531c7ec23bb29885aec8f924ee4c1a46 Mon Sep 17 00:00:00 2001 From: Colin Tuckley Date: Thu, 7 Jan 2010 11:22:47 +0000 Subject: [PATCH 1278/1626] USB: Fix level of isp1760 Reloading ptd error message This error message is not actually an error, it's an information message. It is triggered when a transfer which ended in a NAQ is retried successfully by the hardware. Signed-off-by: Colin Tuckley Cc: Sebastian Andrzej Siewior Cc: Catalin Marinas Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1760-hcd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 9600a58299db..27b8f7cb4471 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1039,12 +1039,12 @@ static void do_atl_int(struct usb_hcd *usb_hcd) if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) { u32 buffstatus; - /* XXX + /* * NAKs are handled in HW by the chip. Usually if the * device is not able to send data fast enough. - * This did not trigger for a long time now. + * This happens mostly on slower hardware. */ - printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: " + printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: " "%d of %zu done: %08x cur: %08x\n", qtd, urb, qh, PTD_XFERRED_LENGTH(dw3), qtd->length, done_map, From 10d2cdb6102669279bee2d9a00a22431b74583d5 Mon Sep 17 00:00:00 2001 From: Ryan May Date: Wed, 6 Jan 2010 10:09:25 -0600 Subject: [PATCH 1279/1626] USB: fix usbstorage for 2770:915d delivers no FAT Resolves kernel.org bug 14914. Remove entry for 2770:915d (usb digital camera with mass storage support) from unusual_devs.h. The fix triggered by the entry causes the file system on the camera to be completely inaccessible (no partition table, the device is not mountable). The patch works, but let me clarify a few things about it. All the patch does is remove the entry for this device from the drivers/usb/storage/unusual_devs.h, which is supposed to help with a problem with the device's reported size (I think). I'm pretty sure it was originally added for a reason, so I'm not sure removing it won't cause other problems to reappear. Also, I should note that this unusual_devs.h entry was present (and activating workarounds) in 2.6.29, but in that version everything works fine. Starting with 2.6.30, things no longer work. Signed-off-by: Ryan May Cc: Rohan Hart Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 64a0a2c27e12..c932f9053188 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1807,13 +1807,6 @@ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_GO_SLOW ), -/* Reported by Rohan Hart */ -UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010, - "INTOVA", - "Pixtreme", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_CAPACITY ), - /* Reported by Frederic Marchal * Mio Moov 330 */ From 96b85179b464cc80d85b5c602af119d1dd6d50bb Mon Sep 17 00:00:00 2001 From: Lothar Wassmann Date: Fri, 15 Jan 2010 08:04:55 -0500 Subject: [PATCH 1280/1626] USB: isp1362: better 64bit printf warning fixes Some hosts that treat the return value of sizeof differently from unsigned long might still hit warnings. So use %zu for sizeof() values. This is a better version of the previous commit b0a9cf297e58721933. Signed-off-by: Lothar Wassmann Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1362-hcd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 73352f3739b5..8d3104441f16 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2270,10 +2270,10 @@ static int isp1362_mem_config(struct usb_hcd *hcd) dev_info(hcd->self.controller, "ISP1362 Memory usage:\n"); dev_info(hcd->self.controller, " ISTL: 2 * %4d: %4d @ $%04x:$%04x\n", istl_size / 2, istl_size, 0, istl_size / 2); - dev_info(hcd->self.controller, " INTL: %4d * (%3lu+8): %4d @ $%04x\n", + dev_info(hcd->self.controller, " INTL: %4d * (%3zu+8): %4d @ $%04x\n", ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE, intl_size, istl_size); - dev_info(hcd->self.controller, " ATL : %4d * (%3lu+8): %4d @ $%04x\n", + dev_info(hcd->self.controller, " ATL : %4d * (%3zu+8): %4d @ $%04x\n", atl_buffers, atl_blksize - PTD_HEADER_SIZE, atl_size, istl_size + intl_size); dev_info(hcd->self.controller, " USED/FREE: %4d %4d\n", total, From 0a2fea2e0dea9df8ead1cb45e4b9cd68e1b1d29b Mon Sep 17 00:00:00 2001 From: Lothar Wassmann Date: Fri, 15 Jan 2010 14:42:02 -0500 Subject: [PATCH 1281/1626] USB: isp1362: fix build failure on ARM systems via irq_flags cleanup There was some left over #ifdef ARM logic that is outdated but no one really noticed. So instead of relying on this tricky logic, properly load and utilize the platform irq_flags resources. Reported-by: Ben Hutchings Signed-off-by: Lothar Wassmann Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1362-hcd.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 8d3104441f16..42971657fde2 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2697,6 +2697,8 @@ static int __init isp1362_probe(struct platform_device *pdev) void __iomem *data_reg; int irq; int retval = 0; + struct resource *irq_res; + unsigned int irq_flags = 0; /* basic sanity checks first. board-specific init logic should * have initialized this the three resources and probably board @@ -2710,11 +2712,12 @@ static int __init isp1362_probe(struct platform_device *pdev) data = platform_get_resource(pdev, IORESOURCE_MEM, 0); addr = platform_get_resource(pdev, IORESOURCE_MEM, 1); - irq = platform_get_irq(pdev, 0); - if (!addr || !data || irq < 0) { + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!addr || !data || !irq_res) { retval = -ENODEV; goto err1; } + irq = irq_res->start; #ifdef CONFIG_USB_HCD_DMA if (pdev->dev.dma_mask) { @@ -2781,12 +2784,16 @@ static int __init isp1362_probe(struct platform_device *pdev) } #endif -#ifdef CONFIG_ARM - if (isp1362_hcd->board) - set_irq_type(irq, isp1362_hcd->board->int_act_high ? IRQT_RISING : IRQT_FALLING); -#endif + if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE) + irq_flags |= IRQF_TRIGGER_RISING; + if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE) + irq_flags |= IRQF_TRIGGER_FALLING; + if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL) + irq_flags |= IRQF_TRIGGER_HIGH; + if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL) + irq_flags |= IRQF_TRIGGER_LOW; - retval = usb_add_hcd(hcd, irq, IRQF_TRIGGER_LOW | IRQF_DISABLED | IRQF_SHARED); + retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED); if (retval != 0) goto err6; pr_info("%s, irq %d\n", hcd->product_desc, irq); From c1fa347f20f17f14a4a1575727fa24340e8a9117 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 19 Jan 2010 14:21:45 +0000 Subject: [PATCH 1282/1626] e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map() The variable count and i are unsigned so the (<|>=)0 tests do not work. Signed-off-by: Roel Kluin Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_main.c | 10 +++++----- drivers/net/e1000e/netdev.c | 10 +++++----- drivers/net/igbvf/netdev.c | 10 +++++----- drivers/net/ixgb/ixgb_main.c | 10 +++++----- drivers/net/ixgbe/ixgbe_main.c | 10 +++++----- 5 files changed, 25 insertions(+), 25 deletions(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 7e855f9bbd97..b3f67b41627f 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2802,13 +2802,13 @@ static int e1000_tx_map(struct e1000_adapter *adapter, dma_error: dev_err(&pdev->dev, "TX DMA map failed\n"); buffer_info->dma = 0; - count--; - - while (count >= 0) { + if (count) count--; - i--; - if (i < 0) + + while (count--) { + if (i==0) i += tx_ring->count; + i--; buffer_info = &tx_ring->buffer_info[i]; e1000_unmap_and_free_tx_resource(adapter, buffer_info); } diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index c45965a256b6..f91f247ed6af 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -3962,13 +3962,13 @@ static int e1000_tx_map(struct e1000_adapter *adapter, dma_error: dev_err(&pdev->dev, "TX DMA map failed\n"); buffer_info->dma = 0; - count--; - - while (count >= 0) { + if (count) count--; - i--; - if (i < 0) + + while (count--) { + if (i==0) i += tx_ring->count; + i--; buffer_info = &tx_ring->buffer_info[i]; e1000_put_txbuf(adapter, buffer_info);; } diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index 0dbd0320023a..10e038adba0f 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -2163,14 +2163,14 @@ dma_error: buffer_info->length = 0; buffer_info->next_to_watch = 0; buffer_info->mapped_as_page = false; - count--; + if (count) + count--; /* clear timestamp and dma mappings for remaining portion of packet */ - while (count >= 0) { - count--; - i--; - if (i < 0) + while (count--) { + if (i==0) i += tx_ring->count; + i--; buffer_info = &tx_ring->buffer_info[i]; igbvf_put_txbuf(adapter, buffer_info); } diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index bcd0f01d5feb..593d1a4f217c 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -1363,13 +1363,13 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb, dma_error: dev_err(&pdev->dev, "TX DMA map failed\n"); buffer_info->dma = 0; - count--; - - while (count >= 0) { + if (count) count--; - i--; - if (i < 0) + + while (count--) { + if (i==0) i += tx_ring->count; + i--; buffer_info = &tx_ring->buffer_info[i]; ixgb_unmap_and_free_tx_resource(adapter, buffer_info); } diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 9c9202f40b10..6d61add27a06 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5167,14 +5167,14 @@ dma_error: tx_buffer_info->dma = 0; tx_buffer_info->time_stamp = 0; tx_buffer_info->next_to_watch = 0; - count--; + if (count) + count--; /* clear timestamp and dma mappings for remaining portion of packet */ - while (count >= 0) { - count--; - i--; - if (i < 0) + while (count--) { + if (i==0) i += tx_ring->count; + i--; tx_buffer_info = &tx_ring->tx_buffer_info[i]; ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info); } From 40a14deaf411592b57cb0720f0e8004293ab9865 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Tue, 19 Jan 2010 14:15:38 +0000 Subject: [PATCH 1283/1626] e1000: enhance frame fragment detection Originally From: Neil Horman Modified by: Jesse Brandeburg Hey all- A security discussion was recently given: http://events.ccc.de/congress/2009/Fahrplan//events/3596.en.html And a patch that I submitted awhile back was brought up. Apparently some of their testing revealed that they were able to force a buffer fragment in e1000 in which the trailing fragment was greater than 4 bytes. As a result the fragment check I introduced failed to detect the fragement and a partial invalid frame was passed up into the network stack. I've written this patch to correct it. I'm in the process of testing it now, but it makes good logical sense to me. Effectively it maintains a per-adapter state variable which detects a non-EOP frame, and discards it and subsequent non-EOP frames leading up to _and_ _including_ the next positive-EOP frame (as it is by definition the last fragment). This should prevent any and all partial frames from entering the network stack from e1000. Signed-off-by: Jesse Brandeburg Acked-by: Neil Horman Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000/e1000.h | 2 ++ drivers/net/e1000/e1000_main.c | 13 +++++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 2a567df3ea71..e8932db7ee77 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -326,6 +326,8 @@ struct e1000_adapter { /* for ioport free */ int bars; int need_ioport; + + bool discarding; }; enum e1000_state_t { diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index b3f67b41627f..a53a2017c537 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3850,13 +3850,22 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, length = le16_to_cpu(rx_desc->length); /* !EOP means multiple descriptors were used to store a single - * packet, also make sure the frame isn't just CRC only */ - if (unlikely(!(status & E1000_RXD_STAT_EOP) || (length <= 4))) { + * packet, if thats the case we need to toss it. In fact, we + * to toss every packet with the EOP bit clear and the next + * frame that _does_ have the EOP bit set, as it is by + * definition only a frame fragment + */ + if (unlikely(!(status & E1000_RXD_STAT_EOP))) + adapter->discarding = true; + + if (adapter->discarding) { /* All receives must fit into a single buffer */ E1000_DBG("%s: Receive packet consumed multiple" " buffers\n", netdev->name); /* recycle */ buffer_info->skb = skb; + if (status & E1000_RXD_STAT_EOP) + adapter->discarding = false; goto next_desc; } From b94b50289622e816adc9f94111cfc2679c80177c Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Tue, 19 Jan 2010 14:15:59 +0000 Subject: [PATCH 1284/1626] e1000e: enhance frame fragment detection Originally patched by Neil Horman e1000e could with a jumbo frame enabled interface, and packet split disabled, receive a packet that would overflow a single rx buffer. While in practice very hard to craft a packet that could abuse this, it is possible. this is related to CVE-2009-4538 Signed-off-by: Jesse Brandeburg CC: Neil Horman Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/e1000.h | 1 + drivers/net/e1000e/netdev.c | 25 +++++++++++++++++++++---- 2 files changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index d6ee28f6ea08..d236efaf7478 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -421,6 +421,7 @@ struct e1000_info { /* CRC Stripping defines */ #define FLAG2_CRC_STRIPPING (1 << 0) #define FLAG2_HAS_PHY_WAKEUP (1 << 1) +#define FLAG2_IS_DISCARDING (1 << 2) #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index f91f247ed6af..1ea395b6c992 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -450,13 +450,23 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, length = le16_to_cpu(rx_desc->length); - /* !EOP means multiple descriptors were used to store a single - * packet, also make sure the frame isn't just CRC only */ - if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) { + /* + * !EOP means multiple descriptors were used to store a single + * packet, if that's the case we need to toss it. In fact, we + * need to toss every packet with the EOP bit clear and the + * next frame that _does_ have the EOP bit set, as it is by + * definition only a frame fragment + */ + if (unlikely(!(status & E1000_RXD_STAT_EOP))) + adapter->flags2 |= FLAG2_IS_DISCARDING; + + if (adapter->flags2 & FLAG2_IS_DISCARDING) { /* All receives must fit into a single buffer */ e_dbg("Receive packet consumed multiple buffers\n"); /* recycle */ buffer_info->skb = skb; + if (status & E1000_RXD_STAT_EOP) + adapter->flags2 &= ~FLAG2_IS_DISCARDING; goto next_desc; } @@ -745,10 +755,16 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, PCI_DMA_FROMDEVICE); buffer_info->dma = 0; - if (!(staterr & E1000_RXD_STAT_EOP)) { + /* see !EOP comment in other rx routine */ + if (!(staterr & E1000_RXD_STAT_EOP)) + adapter->flags2 |= FLAG2_IS_DISCARDING; + + if (adapter->flags2 & FLAG2_IS_DISCARDING) { e_dbg("Packet Split buffers didn't pick up the full " "packet\n"); dev_kfree_skb_irq(skb); + if (staterr & E1000_RXD_STAT_EOP) + adapter->flags2 &= ~FLAG2_IS_DISCARDING; goto next_desc; } @@ -1118,6 +1134,7 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter) rx_ring->next_to_clean = 0; rx_ring->next_to_use = 0; + adapter->flags2 &= ~FLAG2_IS_DISCARDING; writel(0, adapter->hw.hw_addr + rx_ring->head); writel(0, adapter->hw.hw_addr + rx_ring->tail); From 4f6dbe4ac01d2664231d3f3eceadd33a44cde993 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 19 Jan 2010 00:26:13 -0800 Subject: [PATCH 1285/1626] sparc64: Add perf callchain support. Pretty straightforward, and it should be easy to add accurate walk through of signal stack frames in userspace. Signed-off-by: David S. Miller Tested-by: Jens Axboe --- arch/sparc/kernel/perf_event.c | 120 ++++++++++++++++++++++++++++++++- 1 file changed, 119 insertions(+), 1 deletion(-) diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index 198fb4e79ba2..2386ac6ec956 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -1,6 +1,6 @@ /* Performance event support for sparc64. * - * Copyright (C) 2009 David S. Miller + * Copyright (C) 2009, 2010 David S. Miller * * This code is based almost entirely upon the x86 perf event * code, which is: @@ -18,11 +18,15 @@ #include #include +#include #include +#include #include #include #include +#include "kstack.h" + /* Sparc64 chips have two performance counters, 32-bits each, with * overflow interrupts generated on transition from 0xffffffff to 0. * The counters are accessed in one go using a 64-bit register. @@ -1062,3 +1066,117 @@ void __init init_hw_perf_events(void) register_die_notifier(&perf_event_nmi_notifier); } + +static inline void callchain_store(struct perf_callchain_entry *entry, u64 ip) +{ + if (entry->nr < PERF_MAX_STACK_DEPTH) + entry->ip[entry->nr++] = ip; +} + +static void perf_callchain_kernel(struct pt_regs *regs, + struct perf_callchain_entry *entry) +{ + unsigned long ksp, fp; + + callchain_store(entry, PERF_CONTEXT_KERNEL); + callchain_store(entry, regs->tpc); + + ksp = regs->u_regs[UREG_I6]; + fp = ksp + STACK_BIAS; + do { + struct sparc_stackf *sf; + struct pt_regs *regs; + unsigned long pc; + + if (!kstack_valid(current_thread_info(), fp)) + break; + + sf = (struct sparc_stackf *) fp; + regs = (struct pt_regs *) (sf + 1); + + if (kstack_is_trap_frame(current_thread_info(), regs)) { + if (user_mode(regs)) + break; + pc = regs->tpc; + fp = regs->u_regs[UREG_I6] + STACK_BIAS; + } else { + pc = sf->callers_pc; + fp = (unsigned long)sf->fp + STACK_BIAS; + } + callchain_store(entry, pc); + } while (entry->nr < PERF_MAX_STACK_DEPTH); +} + +static void perf_callchain_user_64(struct pt_regs *regs, + struct perf_callchain_entry *entry) +{ + unsigned long ufp; + + callchain_store(entry, PERF_CONTEXT_USER); + callchain_store(entry, regs->tpc); + + ufp = regs->u_regs[UREG_I6] + STACK_BIAS; + do { + struct sparc_stackf *usf, sf; + unsigned long pc; + + usf = (struct sparc_stackf *) ufp; + if (__copy_from_user_inatomic(&sf, usf, sizeof(sf))) + break; + + pc = sf.callers_pc; + ufp = (unsigned long)sf.fp + STACK_BIAS; + callchain_store(entry, pc); + } while (entry->nr < PERF_MAX_STACK_DEPTH); +} + +static void perf_callchain_user_32(struct pt_regs *regs, + struct perf_callchain_entry *entry) +{ + unsigned long ufp; + + callchain_store(entry, PERF_CONTEXT_USER); + callchain_store(entry, regs->tpc); + + ufp = regs->u_regs[UREG_I6]; + do { + struct sparc_stackf32 *usf, sf; + unsigned long pc; + + usf = (struct sparc_stackf32 *) ufp; + if (__copy_from_user_inatomic(&sf, usf, sizeof(sf))) + break; + + pc = sf.callers_pc; + ufp = (unsigned long)sf.fp; + callchain_store(entry, pc); + } while (entry->nr < PERF_MAX_STACK_DEPTH); +} + +/* Like powerpc we can't get PMU interrupts within the PMU handler, + * so no need for seperate NMI and IRQ chains as on x86. + */ +static DEFINE_PER_CPU(struct perf_callchain_entry, callchain); + +struct perf_callchain_entry *perf_callchain(struct pt_regs *regs) +{ + struct perf_callchain_entry *entry = &__get_cpu_var(callchain); + + entry->nr = 0; + if (!user_mode(regs)) { + stack_trace_flush(); + perf_callchain_kernel(regs, entry); + if (current->mm) + regs = task_pt_regs(current); + else + regs = NULL; + } + if (regs) { + flushw_user(); + if (test_thread_flag(TIF_32BIT)) + perf_callchain_user_32(regs, entry); + else + perf_callchain_user_64(regs, entry); + } + return entry; +} From e7bef6b04ca2e8e4cf667c43d7e2ab3034a869d5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 20 Jan 2010 02:59:47 -0800 Subject: [PATCH 1286/1626] sparc64: Fully support both performance counters. Add the rest of the conflict detection and resolution logic necessary to support more than one counter at a time on sparc64. The structure and implementation closely mimicks that of powerpc. Signed-off-by: David S. Miller --- arch/sparc/kernel/perf_event.c | 497 +++++++++++++++++++++++---------- 1 file changed, 348 insertions(+), 149 deletions(-) diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index 2386ac6ec956..e856456ec02f 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -55,16 +55,49 @@ #define PIC_UPPER_INDEX 0 #define PIC_LOWER_INDEX 1 +#define PIC_NO_INDEX -1 struct cpu_hw_events { - struct perf_event *events[MAX_HWEVENTS]; - unsigned long used_mask[BITS_TO_LONGS(MAX_HWEVENTS)]; - unsigned long active_mask[BITS_TO_LONGS(MAX_HWEVENTS)]; + /* Number of events currently scheduled onto this cpu. + * This tells how many entries in the arrays below + * are valid. + */ + int n_events; + + /* Number of new events added since the last hw_perf_disable(). + * This works because the perf event layer always adds new + * events inside of a perf_{disable,enable}() sequence. + */ + int n_added; + + /* Array of events current scheduled on this cpu. */ + struct perf_event *event[MAX_HWEVENTS]; + + /* Array of encoded longs, specifying the %pcr register + * encoding and the mask of PIC counters this even can + * be scheduled on. See perf_event_encode() et al. + */ + unsigned long events[MAX_HWEVENTS]; + + /* The current counter index assigned to an event. When the + * event hasn't been programmed into the cpu yet, this will + * hold PIC_NO_INDEX. The event->hw.idx value tells us where + * we ought to schedule the event. + */ + int current_idx[MAX_HWEVENTS]; + + /* Software copy of %pcr register on this cpu. */ u64 pcr; + + /* Enabled/disable state. */ int enabled; }; DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { .enabled = 1, }; +/* An event map describes the characteristics of a performance + * counter event. In particular it gives the encoding as well as + * a mask telling which counters the event can be measured on. + */ struct perf_event_map { u16 encoding; u8 pic_mask; @@ -73,15 +106,20 @@ struct perf_event_map { #define PIC_LOWER 0x02 }; +/* Encode a perf_event_map entry into a long. */ static unsigned long perf_event_encode(const struct perf_event_map *pmap) { return ((unsigned long) pmap->encoding << 16) | pmap->pic_mask; } -static void perf_event_decode(unsigned long val, u16 *enc, u8 *msk) +static u8 perf_event_get_msk(unsigned long val) { - *msk = val & 0xff; - *enc = val >> 16; + return val & 0xff; +} + +static u64 perf_event_get_enc(unsigned long val) +{ + return val >> 16; } #define C(x) PERF_COUNT_HW_CACHE_##x @@ -495,53 +533,6 @@ static inline void sparc_pmu_disable_event(struct cpu_hw_events *cpuc, struct hw pcr_ops->write(cpuc->pcr); } -void hw_perf_enable(void) -{ - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - u64 val; - int i; - - if (cpuc->enabled) - return; - - cpuc->enabled = 1; - barrier(); - - val = cpuc->pcr; - - for (i = 0; i < MAX_HWEVENTS; i++) { - struct perf_event *cp = cpuc->events[i]; - struct hw_perf_event *hwc; - - if (!cp) - continue; - hwc = &cp->hw; - val |= hwc->config_base; - } - - cpuc->pcr = val; - - pcr_ops->write(cpuc->pcr); -} - -void hw_perf_disable(void) -{ - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - u64 val; - - if (!cpuc->enabled) - return; - - cpuc->enabled = 0; - - val = cpuc->pcr; - val &= ~(PCR_UTRACE | PCR_STRACE | - sparc_pmu->hv_bit | sparc_pmu->irq_bit); - cpuc->pcr = val; - - pcr_ops->write(cpuc->pcr); -} - static u32 read_pmc(int idx) { u64 val; @@ -570,6 +561,30 @@ static void write_pmc(int idx, u64 val) write_pic(pic); } +static u64 sparc_perf_event_update(struct perf_event *event, + struct hw_perf_event *hwc, int idx) +{ + int shift = 64 - 32; + u64 prev_raw_count, new_raw_count; + s64 delta; + +again: + prev_raw_count = atomic64_read(&hwc->prev_count); + new_raw_count = read_pmc(idx); + + if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count, + new_raw_count) != prev_raw_count) + goto again; + + delta = (new_raw_count << shift) - (prev_raw_count << shift); + delta >>= shift; + + atomic64_add(delta, &event->count); + atomic64_sub(delta, &hwc->period_left); + + return new_raw_count; +} + static int sparc_perf_event_set_period(struct perf_event *event, struct hw_perf_event *hwc, int idx) { @@ -602,81 +617,166 @@ static int sparc_perf_event_set_period(struct perf_event *event, return ret; } -static int sparc_pmu_enable(struct perf_event *event) +/* If performance event entries have been added, move existing + * events around (if necessary) and then assign new entries to + * counters. + */ +static u64 maybe_change_configuration(struct cpu_hw_events *cpuc, u64 pcr) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; + int i; - if (test_and_set_bit(idx, cpuc->used_mask)) - return -EAGAIN; + if (!cpuc->n_added) + goto out; - sparc_pmu_disable_event(cpuc, hwc, idx); + /* Read in the counters which are moving. */ + for (i = 0; i < cpuc->n_events; i++) { + struct perf_event *cp = cpuc->event[i]; - cpuc->events[idx] = event; - set_bit(idx, cpuc->active_mask); + if (cpuc->current_idx[i] != PIC_NO_INDEX && + cpuc->current_idx[i] != cp->hw.idx) { + sparc_perf_event_update(cp, &cp->hw, + cpuc->current_idx[i]); + cpuc->current_idx[i] = PIC_NO_INDEX; + } + } - sparc_perf_event_set_period(event, hwc, idx); - sparc_pmu_enable_event(cpuc, hwc, idx); - perf_event_update_userpage(event); - return 0; + /* Assign to counters all unassigned events. */ + for (i = 0; i < cpuc->n_events; i++) { + struct perf_event *cp = cpuc->event[i]; + struct hw_perf_event *hwc = &cp->hw; + int idx = hwc->idx; + u64 enc; + + if (cpuc->current_idx[i] != PIC_NO_INDEX) + continue; + + sparc_perf_event_set_period(cp, hwc, idx); + cpuc->current_idx[i] = idx; + + enc = perf_event_get_enc(cpuc->events[i]); + pcr |= event_encoding(enc, idx); + } +out: + return pcr; } -static u64 sparc_perf_event_update(struct perf_event *event, - struct hw_perf_event *hwc, int idx) +void hw_perf_enable(void) { - int shift = 64 - 32; - u64 prev_raw_count, new_raw_count; - s64 delta; + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + u64 pcr; -again: - prev_raw_count = atomic64_read(&hwc->prev_count); - new_raw_count = read_pmc(idx); + if (cpuc->enabled) + return; - if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count, - new_raw_count) != prev_raw_count) - goto again; + cpuc->enabled = 1; + barrier(); - delta = (new_raw_count << shift) - (prev_raw_count << shift); - delta >>= shift; + pcr = cpuc->pcr; + if (!cpuc->n_events) { + pcr = 0; + } else { + pcr = maybe_change_configuration(cpuc, pcr); - atomic64_add(delta, &event->count); - atomic64_sub(delta, &hwc->period_left); + /* We require that all of the events have the same + * configuration, so just fetch the settings from the + * first entry. + */ + cpuc->pcr = pcr | cpuc->event[0]->hw.config_base; + } - return new_raw_count; + pcr_ops->write(cpuc->pcr); +} + +void hw_perf_disable(void) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + u64 val; + + if (!cpuc->enabled) + return; + + cpuc->enabled = 0; + cpuc->n_added = 0; + + val = cpuc->pcr; + val &= ~(PCR_UTRACE | PCR_STRACE | + sparc_pmu->hv_bit | sparc_pmu->irq_bit); + cpuc->pcr = val; + + pcr_ops->write(cpuc->pcr); } static void sparc_pmu_disable(struct perf_event *event) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; + unsigned long flags; + int i; - clear_bit(idx, cpuc->active_mask); - sparc_pmu_disable_event(cpuc, hwc, idx); + local_irq_save(flags); + perf_disable(); - barrier(); + for (i = 0; i < cpuc->n_events; i++) { + if (event == cpuc->event[i]) { + int idx = cpuc->current_idx[i]; - sparc_perf_event_update(event, hwc, idx); - cpuc->events[idx] = NULL; - clear_bit(idx, cpuc->used_mask); + /* Shift remaining entries down into + * the existing slot. + */ + while (++i < cpuc->n_events) { + cpuc->event[i - 1] = cpuc->event[i]; + cpuc->events[i - 1] = cpuc->events[i]; + cpuc->current_idx[i - 1] = + cpuc->current_idx[i]; + } - perf_event_update_userpage(event); + /* Absorb the final count and turn off the + * event. + */ + sparc_pmu_disable_event(cpuc, hwc, idx); + barrier(); + sparc_perf_event_update(event, hwc, idx); + + perf_event_update_userpage(event); + + cpuc->n_events--; + break; + } + } + + perf_enable(); + local_irq_restore(flags); +} + +static int active_event_index(struct cpu_hw_events *cpuc, + struct perf_event *event) +{ + int i; + + for (i = 0; i < cpuc->n_events; i++) { + if (cpuc->event[i] == event) + break; + } + BUG_ON(i == cpuc->n_events); + return cpuc->current_idx[i]; } static void sparc_pmu_read(struct perf_event *event) { + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + int idx = active_event_index(cpuc, event); struct hw_perf_event *hwc = &event->hw; - sparc_perf_event_update(event, hwc, hwc->idx); + sparc_perf_event_update(event, hwc, idx); } static void sparc_pmu_unthrottle(struct perf_event *event) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + int idx = active_event_index(cpuc, event); struct hw_perf_event *hwc = &event->hw; - sparc_pmu_enable_event(cpuc, hwc, hwc->idx); + sparc_pmu_enable_event(cpuc, hwc, idx); } static atomic_t active_events = ATOMIC_INIT(0); @@ -754,43 +854,75 @@ static void hw_perf_event_destroy(struct perf_event *event) /* Make sure all events can be scheduled into the hardware at * the same time. This is simplified by the fact that we only * need to support 2 simultaneous HW events. + * + * As a side effect, the evts[]->hw.idx values will be assigned + * on success. These are pending indexes. When the events are + * actually programmed into the chip, these values will propagate + * to the per-cpu cpuc->current_idx[] slots, see the code in + * maybe_change_configuration() for details. */ -static int sparc_check_constraints(unsigned long *events, int n_ev) +static int sparc_check_constraints(struct perf_event **evts, + unsigned long *events, int n_ev) { - if (n_ev <= perf_max_events) { - u8 msk1, msk2; - u16 dummy; + u8 msk0 = 0, msk1 = 0; + int idx0 = 0; - if (n_ev == 1) - return 0; - BUG_ON(n_ev != 2); - perf_event_decode(events[0], &dummy, &msk1); - perf_event_decode(events[1], &dummy, &msk2); + /* This case is possible when we are invoked from + * hw_perf_group_sched_in(). + */ + if (!n_ev) + return 0; - /* If both events can go on any counter, OK. */ - if (msk1 == (PIC_UPPER | PIC_LOWER) && - msk2 == (PIC_UPPER | PIC_LOWER)) - return 0; + if (n_ev > perf_max_events) + return -1; - /* If one event is limited to a specific counter, - * and the other can go on both, OK. - */ - if ((msk1 == PIC_UPPER || msk1 == PIC_LOWER) && - msk2 == (PIC_UPPER | PIC_LOWER)) - return 0; - if ((msk2 == PIC_UPPER || msk2 == PIC_LOWER) && - msk1 == (PIC_UPPER | PIC_LOWER)) - return 0; + msk0 = perf_event_get_msk(events[0]); + if (n_ev == 1) { + if (msk0 & PIC_LOWER) + idx0 = 1; + goto success; + } + BUG_ON(n_ev != 2); + msk1 = perf_event_get_msk(events[1]); - /* If the events are fixed to different counters, OK. */ - if ((msk1 == PIC_UPPER && msk2 == PIC_LOWER) || - (msk1 == PIC_LOWER && msk2 == PIC_UPPER)) - return 0; + /* If both events can go on any counter, OK. */ + if (msk0 == (PIC_UPPER | PIC_LOWER) && + msk1 == (PIC_UPPER | PIC_LOWER)) + goto success; - /* Otherwise, there is a conflict. */ + /* If one event is limited to a specific counter, + * and the other can go on both, OK. + */ + if ((msk0 == PIC_UPPER || msk0 == PIC_LOWER) && + msk1 == (PIC_UPPER | PIC_LOWER)) { + if (msk0 & PIC_LOWER) + idx0 = 1; + goto success; } + if ((msk1 == PIC_UPPER || msk1 == PIC_LOWER) && + msk0 == (PIC_UPPER | PIC_LOWER)) { + if (msk1 & PIC_UPPER) + idx0 = 1; + goto success; + } + + /* If the events are fixed to different counters, OK. */ + if ((msk0 == PIC_UPPER && msk1 == PIC_LOWER) || + (msk0 == PIC_LOWER && msk1 == PIC_UPPER)) { + if (msk0 & PIC_LOWER) + idx0 = 1; + goto success; + } + + /* Otherwise, there is a conflict. */ return -1; + +success: + evts[0]->hw.idx = idx0; + if (n_ev == 2) + evts[1]->hw.idx = idx0 ^ 1; + return 0; } static int check_excludes(struct perf_event **evts, int n_prev, int n_new) @@ -822,7 +954,8 @@ static int check_excludes(struct perf_event **evts, int n_prev, int n_new) } static int collect_events(struct perf_event *group, int max_count, - struct perf_event *evts[], unsigned long *events) + struct perf_event *evts[], unsigned long *events, + int *current_idx) { struct perf_event *event; int n = 0; @@ -831,7 +964,8 @@ static int collect_events(struct perf_event *group, int max_count, if (n >= max_count) return -1; evts[n] = group; - events[n++] = group->hw.event_base; + events[n] = group->hw.event_base; + current_idx[n++] = PIC_NO_INDEX; } list_for_each_entry(event, &group->sibling_list, group_entry) { if (!is_software_event(event) && @@ -839,20 +973,100 @@ static int collect_events(struct perf_event *group, int max_count, if (n >= max_count) return -1; evts[n] = event; - events[n++] = event->hw.event_base; + events[n] = event->hw.event_base; + current_idx[n++] = PIC_NO_INDEX; } } return n; } +static void event_sched_in(struct perf_event *event, int cpu) +{ + event->state = PERF_EVENT_STATE_ACTIVE; + event->oncpu = cpu; + event->tstamp_running += event->ctx->time - event->tstamp_stopped; + if (is_software_event(event)) + event->pmu->enable(event); +} + +int hw_perf_group_sched_in(struct perf_event *group_leader, + struct perf_cpu_context *cpuctx, + struct perf_event_context *ctx, int cpu) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct perf_event *sub; + int n0, n; + + if (!sparc_pmu) + return 0; + + n0 = cpuc->n_events; + n = collect_events(group_leader, perf_max_events - n0, + &cpuc->event[n0], &cpuc->events[n0], + &cpuc->current_idx[n0]); + if (n < 0) + return -EAGAIN; + if (check_excludes(cpuc->event, n0, n)) + return -EINVAL; + if (sparc_check_constraints(cpuc->event, cpuc->events, n + n0)) + return -EAGAIN; + cpuc->n_events = n0 + n; + cpuc->n_added += n; + + cpuctx->active_oncpu += n; + n = 1; + event_sched_in(group_leader, cpu); + list_for_each_entry(sub, &group_leader->sibling_list, group_entry) { + if (sub->state != PERF_EVENT_STATE_OFF) { + event_sched_in(sub, cpu); + n++; + } + } + ctx->nr_active += n; + + return 1; +} + +static int sparc_pmu_enable(struct perf_event *event) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + int n0, ret = -EAGAIN; + unsigned long flags; + + local_irq_save(flags); + perf_disable(); + + n0 = cpuc->n_events; + if (n0 >= perf_max_events) + goto out; + + cpuc->event[n0] = event; + cpuc->events[n0] = event->hw.event_base; + cpuc->current_idx[n0] = PIC_NO_INDEX; + + if (check_excludes(cpuc->event, n0, 1)) + goto out; + if (sparc_check_constraints(cpuc->event, cpuc->events, n0 + 1)) + goto out; + + cpuc->n_events++; + cpuc->n_added++; + + ret = 0; +out: + perf_enable(); + local_irq_restore(flags); + return ret; +} + static int __hw_perf_event_init(struct perf_event *event) { struct perf_event_attr *attr = &event->attr; struct perf_event *evts[MAX_HWEVENTS]; struct hw_perf_event *hwc = &event->hw; unsigned long events[MAX_HWEVENTS]; + int current_idx_dmy[MAX_HWEVENTS]; const struct perf_event_map *pmap; - u64 enc; int n; if (atomic_read(&nmi_active) < 0) @@ -869,10 +1083,7 @@ static int __hw_perf_event_init(struct perf_event *event) } else return -EOPNOTSUPP; - /* We save the enable bits in the config_base. So to - * turn off sampling just write 'config', and to enable - * things write 'config | config_base'. - */ + /* We save the enable bits in the config_base. */ hwc->config_base = sparc_pmu->irq_bit; if (!attr->exclude_user) hwc->config_base |= PCR_UTRACE; @@ -883,13 +1094,11 @@ static int __hw_perf_event_init(struct perf_event *event) hwc->event_base = perf_event_encode(pmap); - enc = pmap->encoding; - n = 0; if (event->group_leader != event) { n = collect_events(event->group_leader, perf_max_events - 1, - evts, events); + evts, events, current_idx_dmy); if (n < 0) return -EINVAL; } @@ -899,9 +1108,11 @@ static int __hw_perf_event_init(struct perf_event *event) if (check_excludes(evts, n, 1)) return -EINVAL; - if (sparc_check_constraints(events, n + 1)) + if (sparc_check_constraints(evts, events, n + 1)) return -EINVAL; + hwc->idx = PIC_NO_INDEX; + /* Try to do all error checking before this point, as unwinding * state after grabbing the PMC is difficult. */ @@ -914,15 +1125,6 @@ static int __hw_perf_event_init(struct perf_event *event) atomic64_set(&hwc->period_left, hwc->sample_period); } - if (pmap->pic_mask & PIC_UPPER) { - hwc->idx = PIC_UPPER_INDEX; - enc <<= sparc_pmu->upper_shift; - } else { - hwc->idx = PIC_LOWER_INDEX; - enc <<= sparc_pmu->lower_shift; - } - - hwc->config |= enc; return 0; } @@ -972,7 +1174,7 @@ static int __kprobes perf_event_nmi_handler(struct notifier_block *self, struct perf_sample_data data; struct cpu_hw_events *cpuc; struct pt_regs *regs; - int idx; + int i; if (!atomic_read(&active_events)) return NOTIFY_DONE; @@ -1001,13 +1203,12 @@ static int __kprobes perf_event_nmi_handler(struct notifier_block *self, if (sparc_pmu->irq_bit) pcr_ops->write(cpuc->pcr); - for (idx = 0; idx < MAX_HWEVENTS; idx++) { - struct perf_event *event = cpuc->events[idx]; + for (i = 0; i < cpuc->n_events; i++) { + struct perf_event *event = cpuc->event[i]; + int idx = cpuc->current_idx[i]; struct hw_perf_event *hwc; u64 val; - if (!test_bit(idx, cpuc->active_mask)) - continue; hwc = &event->hw; val = sparc_perf_event_update(event, hwc, idx); if (val & (1ULL << 31)) @@ -1059,10 +1260,8 @@ void __init init_hw_perf_events(void) pr_cont("Supported PMU type is '%s'\n", sparc_pmu_type); - /* All sparc64 PMUs currently have 2 events. But this simple - * driver only supports one active event at a time. - */ - perf_max_events = 1; + /* All sparc64 PMUs currently have 2 events. */ + perf_max_events = 2; register_die_notifier(&perf_event_nmi_notifier); } From a084b6678a89a106a350c12e4845f42ccc9811f0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 20 Jan 2010 03:04:14 -0800 Subject: [PATCH 1287/1626] sparc: Add missing SW perf fault events. Signed-off-by: David S. Miller --- arch/sparc/mm/fault_32.c | 12 ++++++++++-- arch/sparc/mm/fault_64.c | 13 ++++++++++--- 2 files changed, 20 insertions(+), 5 deletions(-) diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c index b99f81c4906f..a3413acb8f12 100644 --- a/arch/sparc/mm/fault_32.c +++ b/arch/sparc/mm/fault_32.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -203,6 +204,8 @@ asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write, if (in_atomic() || !mm) goto no_context; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); + down_read(&mm->mmap_sem); /* @@ -249,10 +252,15 @@ good_area: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) + if (fault & VM_FAULT_MAJOR) { current->maj_flt++; - else + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + regs, address); + } else { current->min_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + regs, address); + } up_read(&mm->mmap_sem); return; diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c index 6081936bf03b..b9d4ff02b8fc 100644 --- a/arch/sparc/mm/fault_64.c +++ b/arch/sparc/mm/fault_64.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -296,6 +297,8 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) if (in_atomic() || !mm) goto intr_or_no_mm; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); + if (!down_read_trylock(&mm->mmap_sem)) { if ((regs->tstate & TSTATE_PRIV) && !search_exception_tables(regs->tpc)) { @@ -400,11 +403,15 @@ good_area: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) + if (fault & VM_FAULT_MAJOR) { current->maj_flt++; - else + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + regs, address); + } else { current->min_flt++; - + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + regs, address); + } up_read(&mm->mmap_sem); mm_rss = get_mm_rss(mm); From 3583cbd951d31517de015eab85eb0b5705bce8a9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 20 Jan 2010 16:32:21 -0800 Subject: [PATCH 1288/1626] sparc64: Update defconfig. Signed-off-by: David S. Miller --- arch/sparc/configs/sparc64_defconfig | 131 ++++++++++++++++++++------- 1 file changed, 100 insertions(+), 31 deletions(-) diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig index f80b881dfea7..41c5a56aa6f2 100644 --- a/arch/sparc/configs/sparc64_defconfig +++ b/arch/sparc/configs/sparc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Tue Sep 15 17:06:03 2009 +# Linux kernel version: 2.6.33-rc2 +# Wed Jan 20 16:31:47 2010 # CONFIG_64BIT=y CONFIG_SPARC=y @@ -20,6 +20,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_AUDIT_ARCH=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_MMU=y CONFIG_ARCH_NO_VIRT_TO_BUS=y @@ -50,6 +51,7 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=64 # CONFIG_RCU_FANOUT_EXACT is not set @@ -62,8 +64,7 @@ CONFIG_RT_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set @@ -97,24 +98,25 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # -# Performance Counters +# Kernel Performance Events And Counters # -CONFIG_PERF_COUNTERS=y +CONFIG_PERF_EVENTS=y CONFIG_EVENT_PROFILE=y +CONFIG_PERF_COUNTERS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y @@ -152,14 +154,41 @@ CONFIG_BLOCK_COMPAT=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y # CONFIG_FREEZER is not set # @@ -179,6 +208,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_SPARC64_SMP=y +CONFIG_EARLYFB=y CONFIG_SPARC64_PAGE_SIZE_8KB=y # CONFIG_SPARC64_PAGE_SIZE_64KB is not set CONFIG_SECCOMP=y @@ -216,8 +246,7 @@ CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=8192 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y @@ -315,6 +344,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -356,9 +386,6 @@ CONFIG_NET_TCPPROBE=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -376,6 +403,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y @@ -397,6 +425,11 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +# CONFIG_BLK_DEV_DRBD is not set CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -408,6 +441,7 @@ CONFIG_ATA_OVER_ETH=m CONFIG_SUNVDC=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -415,6 +449,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -522,8 +557,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -557,7 +595,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SUNESP is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -568,7 +608,9 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m +# CONFIG_MULTICORE_RAID456 is not set CONFIG_MD_RAID6_PQ=m +# CONFIG_ASYNC_RAID6_TEST is not set CONFIG_MD_MULTIPATH=m # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -592,7 +634,7 @@ CONFIG_DM_ZERO=m # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -664,6 +706,7 @@ CONFIG_NET_PCI=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -745,6 +788,7 @@ CONFIG_SLHC=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -754,6 +798,7 @@ CONFIG_SLHC=m CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -770,9 +815,13 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set CONFIG_KEYBOARD_LKKBD=m +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_SUNKBD=y # CONFIG_KEYBOARD_XTKBD is not set @@ -812,6 +861,7 @@ CONFIG_SERIO_I8042=y CONFIG_SERIO_PCIPS2=m CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -844,6 +894,7 @@ CONFIG_SERIAL_SUNHV=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -858,6 +909,7 @@ CONFIG_HW_RANDOM_N2RNG=m CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y @@ -897,11 +949,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - # # Other I2C/SMBus bus drivers # @@ -911,10 +958,6 @@ CONFIG_I2C_ALGOBIT=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -932,6 +975,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -955,6 +1003,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -981,6 +1030,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -993,9 +1043,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_ULTRA45 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1013,16 +1062,20 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1176,6 +1229,7 @@ CONFIG_SND_ALI5451=m # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set @@ -1311,6 +1365,7 @@ CONFIG_USB_EHCI_HCD=m # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1426,6 +1481,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1447,7 +1503,9 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set CONFIG_RTC_DRV_M48T59=y +# CONFIG_RTC_DRV_MSM6242 is not set CONFIG_RTC_DRV_BQ4802=y +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1625,6 +1683,7 @@ CONFIG_PRINTK_TIME=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1678,9 +1737,11 @@ CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y @@ -1688,6 +1749,7 @@ CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set +# CONFIG_FTRACE_SYSCALLS is not set # CONFIG_BOOT_TRACER is not set CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set @@ -1706,6 +1768,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_DCFLUSH is not set # CONFIG_STACK_DEBUG is not set +# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set # # Security options @@ -1714,11 +1777,17 @@ CONFIG_KEYS=y # CONFIG_KEYS_DEBUG_PROC_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m CONFIG_ASYNC_MEMCPY=m CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m CONFIG_CRYPTO=y # From 1daa8c1d75876f690ed8d3f13c806034af5984eb Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 20 Jan 2010 22:39:29 +0000 Subject: [PATCH 1289/1626] omap: Enable GPMC clock in gpmc_init Don't assume that gpmc_l3_clk is on, enable it before touching configuration registers. Note that the current code assumes that this clock is always enabled. We are already setting smart idle and L3 autogating for GPMC clock in gpmc_init. Signed-off-by: Olof Johansson Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index bd8cb5974726..3f1334f62e7a 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -534,6 +534,8 @@ void __init gpmc_init(void) BUG(); } + clk_enable(gpmc_l3_clk); + l = gpmc_read_reg(GPMC_REVISION); printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f); /* Set smart idle mode and automatic L3 clock gating */ From 2bbe3af3f1e1c1d0992c984e05d061ef5469edb4 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 23 Oct 2009 19:03:48 +0300 Subject: [PATCH 1290/1626] OMAP3: PM: Ack pending interrupts before entering suspend Suspending drivers may still generate interrupts just before their suspend is completed. Any pending interrupts here will prevent sleep. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/irq.c | 6 ++++++ arch/arm/mach-omap2/pm34xx.c | 2 ++ arch/arm/plat-omap/include/plat/irqs.h | 1 + 3 files changed, 9 insertions(+) diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index e9bc782fa414..54c5f0dcd663 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -274,4 +274,10 @@ void omap_intc_restore_context(void) } /* MIRs are saved and restore with other PRCM registers */ } + +void omap3_intc_suspend(void) +{ + /* A pending interrupt would prevent OMAP from entering suspend */ + omap_ack_irq(0); +} #endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c6cc809afb79..b26418d55076 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -578,6 +578,8 @@ static int omap3_pm_suspend(void) } omap_uart_prepare_suspend(); + omap3_intc_suspend(); + omap_sram_idle(); restore: diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 97d6c50c3dcb..0082036f6a48 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -499,6 +499,7 @@ extern void omap_init_irq(void); extern int omap_irq_pending(void); void omap_intc_save_context(void); void omap_intc_restore_context(void); +void omap3_intc_suspend(void); #endif #include From b296c8118b26a359b027b8c9bb9f5f41dc7693fa Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 23 Oct 2009 19:03:49 +0300 Subject: [PATCH 1291/1626] OMAP3: PM: Enable system control module autoidle Enable the auto-idle feature of the SCM block to save some additional power. Signed-off-by: Mika Westerberg Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index b26418d55076..8a148fbbab43 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -837,6 +837,8 @@ static void __init prcm_setup_regs(void) CM_AUTOIDLE); } + omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG); + /* * Set all plls to autoidle. This is needed until autoidle is * enabled by clockfw From f18cc2ff5e18e8eb6df5284866331ef4a2db58d6 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 23 Oct 2009 19:03:50 +0300 Subject: [PATCH 1292/1626] OMAP3: PM: Disable interrupt controller AUTOIDLE before WFI OMAP interrupt controller goes to unknown state when there is right combination of l3,l4 sleep/wake-up transitions, l4 autoidle in interrupt controller and some interrupt. When this happens, interrupts are not delivered to ARM anymore and ARM will remain in WFI (wait for interrupt) until interrupt controller is forced to wake-up (i.e. lauterbach). Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/irq.c | 12 ++++++++++++ arch/arm/mach-omap2/pm34xx.c | 2 ++ arch/arm/plat-omap/include/plat/irqs.h | 2 ++ 3 files changed, 16 insertions(+) diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 54c5f0dcd663..27054025da2b 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -280,4 +280,16 @@ void omap3_intc_suspend(void) /* A pending interrupt would prevent OMAP from entering suspend */ omap_ack_irq(0); } + +void omap3_intc_prepare_idle(void) +{ + /* Disable autoidle as it can stall interrupt controller */ + intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG); +} + +void omap3_intc_resume_idle(void) +{ + /* Re-enable autoidle */ + intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG); +} #endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 8a148fbbab43..af83555795ff 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -392,6 +392,7 @@ void omap_sram_idle(void) prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); omap3_enable_io_chain(); } + omap3_intc_prepare_idle(); /* * On EMU/HS devices ROM code restores a SRDC value @@ -438,6 +439,7 @@ void omap_sram_idle(void) OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); } + omap3_intc_resume_idle(); /* PER */ if (per_next_state < PWRDM_POWER_ON) { diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 0082036f6a48..c0ab7c80f72e 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -500,6 +500,8 @@ extern int omap_irq_pending(void); void omap_intc_save_context(void); void omap_intc_restore_context(void); void omap3_intc_suspend(void); +void omap3_intc_prepare_idle(void); +void omap3_intc_resume_idle(void); #endif #include From a174e609b5b9b3bc1c5859402be8d8d88f6e098c Mon Sep 17 00:00:00 2001 From: Sanjeev Premi Date: Mon, 2 Nov 2009 20:23:38 +0530 Subject: [PATCH 1293/1626] OMAP3: PM: Remove duplicate code blocks This patch removes code blocks that are repeated in function prcm_setup_regs(). Signed-off-by: Sanjeev Premi Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index af83555795ff..d6cab338cad1 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -910,24 +910,6 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - /* Don't attach IVA interrupts */ - prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); - prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); - prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); - prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); - - /* Clear any pending 'reset' flags */ - prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); - prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); - prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST); - prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST); - prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST); - prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST); - prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST); - - /* Clear any pending PRCM interrupts */ - prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - omap3_iva_idle(); omap3_d2d_idle(); } From afbcf6197d78aed814e90bad6099ecfbeb756ec1 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 26 Oct 2009 15:10:40 +0200 Subject: [PATCH 1294/1626] OMAP3: CPUidle: Fixed timer resolution Previously used u32 as temporary data storage that wraps around at 4.294s. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/cpuidle34xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index a26d6a08ae3f..12f0cbfc2894 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -137,7 +137,7 @@ return_sleep_time: local_irq_enable(); local_fiq_enable(); - return (u32)timespec_to_ns(&ts_idle)/1000; + return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC; } /** From a087cad92c0d83f096024d6ec8c8a8f6b6286811 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 12 Nov 2009 12:07:20 +0200 Subject: [PATCH 1295/1626] OMAP3: Fixed ARM aux ctrl register save/restore Current value is stored on SDRAM and it is written back during wakeup. Previously a static value of 0x72 was written there. Signed-off-by: Tero Kristo Acked-by: Thara Gopinath Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/sleep34xx.S | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 15268f8b61de..c3626ea48143 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -245,7 +245,8 @@ restore: mov r1, #0 @ set task id for ROM code in r1 mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff - adr r3, write_aux_control_params @ r3 points to parameters + ldr r4, scratchpad_base + ldr r3, [r4, #0xBC] @ r3 points to parameters mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c10, 5 @ data memory barrier .word 0xE1600071 @ call SMI monitor (smi #1) @@ -253,14 +254,14 @@ restore: b logic_l1_restore l2_inv_api_params: .word 0x1, 0x00 -write_aux_control_params: - .word 0x1, 0x72 l2_inv_gp: /* Execute smi to invalidate L2 cache */ mov r12, #0x1 @ set up to invalide L2 smi: .word 0xE1600070 @ Call SMI monitor (smieq) /* Write to Aux control register to set some bits */ - mov r0, #0x72 + ldr r4, scratchpad_base + ldr r3, [r4,#0xBC] + ldr r0, [r3,#4] mov r12, #0x3 .word 0xE1600070 @ Call SMI monitor (smieq) logic_l1_restore: @@ -271,6 +272,7 @@ logic_l1_restore: ldr r4, scratchpad_base ldr r3, [r4,#0xBC] + adds r3, r3, #8 ldmia r3!, {r4-r6} mov sp, r4 msr spsr_cxsf, r5 @@ -387,6 +389,9 @@ usettbr0: save_context_wfi: /*b save_context_wfi*/ @ enable to debug save code mov r8, r0 /* Store SDRAM address in r8 */ + mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register + mov r4, #0x1 @ Number of parameters for restore call + stmia r8!, {r4-r5} /* Check what that target sleep state is:stored in r1*/ /* 1 - Only L1 and logic lost */ /* 2 - Only L2 lost */ From 8640425b265752a1b7bae041815872cda5b72a2f Mon Sep 17 00:00:00 2001 From: "Sripathy, Vishwanath" Date: Mon, 16 Nov 2009 16:41:40 +0530 Subject: [PATCH 1296/1626] OMAP3: PM: Removing redundant and potentially dangerous PRCM configration As part of Core domain context restoration while coming out of off mode there are some registers being restored which are not required to be restored. ROM code will have restored them already. Overwriting some of them can have potential side effect. Eg: CM_CLKEN_PLL register should not be written while dpll is locked. Tested on OMAP 3430 SDP for suspend/resume and off mode with sleep_while_idle enabled. Signed-off-by: Vishwanath BS Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/prcm.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 3ea8177ffb25..cf466ea1dffc 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -44,7 +44,6 @@ struct omap3_prcm_regs { u32 iva2_cm_clksel2; u32 cm_sysconfig; u32 sgx_cm_clksel; - u32 wkup_cm_clksel; u32 dss_cm_clksel; u32 cam_cm_clksel; u32 per_cm_clksel; @@ -53,7 +52,6 @@ struct omap3_prcm_regs { u32 pll_cm_autoidle2; u32 pll_cm_clksel4; u32 pll_cm_clksel5; - u32 pll_cm_clken; u32 pll_cm_clken2; u32 cm_polctrl; u32 iva2_cm_fclken; @@ -77,7 +75,6 @@ struct omap3_prcm_regs { u32 usbhost_cm_iclken; u32 iva2_cm_autiidle2; u32 mpu_cm_autoidle2; - u32 pll_cm_autoidle; u32 iva2_cm_clkstctrl; u32 mpu_cm_clkstctrl; u32 core_cm_clkstctrl; @@ -274,7 +271,6 @@ void omap3_prcm_save_context(void) prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG); prcm_context.sgx_cm_clksel = cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL); - prcm_context.wkup_cm_clksel = cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); prcm_context.dss_cm_clksel = cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL); prcm_context.cam_cm_clksel = @@ -291,8 +287,6 @@ void omap3_prcm_save_context(void) cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4); prcm_context.pll_cm_clksel5 = cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5); - prcm_context.pll_cm_clken = - cm_read_mod_reg(PLL_MOD, CM_CLKEN); prcm_context.pll_cm_clken2 = cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2); prcm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL); @@ -338,8 +332,6 @@ void omap3_prcm_save_context(void) cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2); prcm_context.mpu_cm_autoidle2 = cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2); - prcm_context.pll_cm_autoidle = - cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); prcm_context.iva2_cm_clkstctrl = cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL); prcm_context.mpu_cm_clkstctrl = @@ -431,7 +423,6 @@ void omap3_prcm_restore_context(void) __raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG); cm_write_mod_reg(prcm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD, CM_CLKSEL); - cm_write_mod_reg(prcm_context.wkup_cm_clksel, WKUP_MOD, CM_CLKSEL); cm_write_mod_reg(prcm_context.dss_cm_clksel, OMAP3430_DSS_MOD, CM_CLKSEL); cm_write_mod_reg(prcm_context.cam_cm_clksel, OMAP3430_CAM_MOD, @@ -448,7 +439,6 @@ void omap3_prcm_restore_context(void) OMAP3430ES2_CM_CLKSEL4); cm_write_mod_reg(prcm_context.pll_cm_clksel5, PLL_MOD, OMAP3430ES2_CM_CLKSEL5); - cm_write_mod_reg(prcm_context.pll_cm_clken, PLL_MOD, CM_CLKEN); cm_write_mod_reg(prcm_context.pll_cm_clken2, PLL_MOD, OMAP3430ES2_CM_CLKEN2); __raw_writel(prcm_context.cm_polctrl, OMAP3430_CM_POLCTRL); @@ -487,7 +477,6 @@ void omap3_prcm_restore_context(void) cm_write_mod_reg(prcm_context.iva2_cm_autiidle2, OMAP3430_IVA2_MOD, CM_AUTOIDLE2); cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2); - cm_write_mod_reg(prcm_context.pll_cm_autoidle, PLL_MOD, CM_AUTOIDLE); cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD, CM_CLKSTCTRL); cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL); From ae559d8769531ab8895d241107a10fbe320b3b7f Mon Sep 17 00:00:00 2001 From: Manjunatha GK Date: Mon, 16 Nov 2009 20:16:52 +0530 Subject: [PATCH 1297/1626] OMAP3: PM debug: fix build error when !CONFIG_DEBUG_FS The PM debug code fails to build on when CONFIG_DEBUG_FS is not enabled. Build error log: arch/arm/mach-omap2/built-in.o: In function `omap_sram_idle': arch/arm/mach-omap2/pm34xx.c:449: undefined reference to `pm_dbg_regset_save' arch/arm/mach-omap2/pm34xx.c:460: undefined reference to `pm_dbg_regset_save' arch/arm/mach-omap2/built-in.o: In function `configure_vc': arch/arm/mach-omap2/pm34xx.c:1237: undefined reference to `pm_dbg_regset_init' arch/arm/mach-omap2/pm34xx.c:1238: undefined reference to `pm_dbg_regset_init' make: *** [.tmp_vmlinux1] Error 1 This patch fixes the above errors. Kernel booting is tested on omap zoom2 and zoom3 boards. Signed-off-by: Manjunatha GK Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm-debug.c | 2 -- arch/arm/mach-omap2/pm.h | 8 ++++++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 860b755d2220..e9d3993d1f96 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -604,6 +604,4 @@ static int __init pm_dbg_init(void) } arch_initcall(pm_dbg_init); -#else -void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {} #endif diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 0bf345db7147..7a9c2d004511 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -32,12 +32,16 @@ extern struct omap_dm_timer *gptimer_wakeup; #ifdef CONFIG_PM_DEBUG extern void omap2_pm_dump(int mode, int resume, unsigned int us); extern int omap2_pm_debug; +#else +#define omap2_pm_dump(mode, resume, us) do {} while (0); +#define omap2_pm_debug 0 +#endif + +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev); extern int pm_dbg_regset_save(int reg_set); extern int pm_dbg_regset_init(int reg_set); #else -#define omap2_pm_dump(mode, resume, us) do {} while (0); -#define omap2_pm_debug 0 #define pm_dbg_update_time(pwrdm, prev) do {} while (0); #define pm_dbg_regset_save(reg_set) do {} while (0); #define pm_dbg_regset_init(reg_set) do {} while (0); From e3d9329640e4b291cdd2c6d178774c28bba47d59 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 26 Nov 2009 15:18:50 +0200 Subject: [PATCH 1298/1626] OMAP3: PM: Enable wake-up from McBSP2, 3 and 4 modules Wake-up from McBSP ports are needed, especially when the THRESHOLD dma mode is in use for audio playback. Signed-off-by: Peter Ujfalusi Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index d6cab338cad1..96075bf5e086 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -884,12 +884,16 @@ static void __init prcm_setup_regs(void) /* Enable wakeups in PER */ prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 | OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 | - OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3, + OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3 | + OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 | + OMAP3430_EN_MCBSP4, OMAP3430_PER_MOD, PM_WKEN); /* and allow them to wake up MPU */ prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 | OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 | - OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3, + OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3 | + OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 | + OMAP3430_EN_MCBSP4, OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); /* Don't attach IVA interrupts */ From 61b17d972f60fb8097592cadee2a2dd594285ff6 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 16 Dec 2009 17:22:04 +0100 Subject: [PATCH 1299/1626] OMAP: omap3_pm_get_suspend_state() error ignored in pwrdm_suspend_get() val is an u64 pointer, we need an int to check the error. Signed-off-by: Roel Kluin Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm-debug.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index e9d3993d1f96..562d190cd66c 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -488,9 +488,11 @@ int pm_dbg_regset_init(int reg_set) static int pwrdm_suspend_get(void *data, u64 *val) { - *val = omap3_pm_get_suspend_state((struct powerdomain *)data); + int ret; + ret = omap3_pm_get_suspend_state((struct powerdomain *)data); + *val = ret; - if (*val >= 0) + if (ret >= 0) return 0; return *val; } From dccaad895094a699c37c065bff3fa9bb997daeb9 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 17 Nov 2009 18:34:53 +0200 Subject: [PATCH 1300/1626] OMAP3: PM: Force write last pad config register into save area Due to OMAP3 erratas 1.157, 1.185 the save of the last pad register (ETK_D14 and ETK_D15) can fail sometimes when there is simultaneous OCP access to the SCM register area. Fixed by writing the last register to the save area. Also, optimized the delay loop for the HW save to include an udelay(1), which limits the number of unnecessary HW accesses to SCM register area during the save. Signed-off-by: Tero Kristo Acked-by: Nishanth Menon Reviewed-by: Anand Gadiyar Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 96075bf5e086..31762ca9f117 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -126,7 +127,15 @@ static void omap3_core_save_context(void) /* wait for the save to complete */ while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS) & PADCONF_SAVE_DONE)) - ; + udelay(1); + + /* + * Force write last pad into memory, as this can fail in some + * cases according to erratas 1.157, 1.185 + */ + omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14), + OMAP343X_CONTROL_MEM_WKUP + 0x2a0); + /* Save the Interrupt controller context */ omap_intc_save_context(); /* Save the GPMC context */ From d92cfcbe39fdb2328a28b5505f31cb8be40fc339 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 24 Sep 2009 16:35:48 -0700 Subject: [PATCH 1301/1626] OMAP: timekeeping: time should not stop during suspend During suspend, the kernel timekeeping subsystem is shut down. Before suspend and upon resume, it uses a weak function read_persistent_clock() to determine the amount of time that elapsed during suspend. This function was not implemented on OMAP, so from the timekeeping subsystem perspective (and thus userspace as well) it appeared that no time elapsed during suspend. This patch uses the 32k sync timer as a the persistent clock. NOTE: This does *NOT* fully handle wrapping of the 32k sync timer, so more than one wrapping of the 32k sync timer during suspend may cause problems. Also note there are not interrupts when the 32k sync timer wraps, so something else has to be done. Reported-by: Jon Hunter Signed-off-by: Kevin Hilman --- arch/arm/plat-omap/common.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index bf1eaf3a27d4..dddc0273bc8b 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -172,6 +172,32 @@ unsigned long long sched_clock(void) clocksource_32k.mult, clocksource_32k.shift); } +/** + * read_persistent_clock - Return time from a persistent clock. + * + * Reads the time from a source which isn't disabled during PM, the + * 32k sync timer. Convert the cycles elapsed since last read into + * nsecs and adds to a monotonically increasing timespec. + */ +static struct timespec persistent_ts; +static cycles_t cycles, last_cycles; +void read_persistent_clock(struct timespec *ts) +{ + unsigned long long nsecs; + cycles_t delta; + struct timespec *tsp = &persistent_ts; + + last_cycles = cycles; + cycles = clocksource_32k.read(&clocksource_32k); + delta = cycles - last_cycles; + + nsecs = clocksource_cyc2ns(delta, + clocksource_32k.mult, clocksource_32k.shift); + + timespec_add_ns(tsp, nsecs); + *ts = *tsp; +} + static int __init omap_init_clocksource_32k(void) { static char err[] __initdata = KERN_ERR From b92c5721d28507738d294e9a582eb6232ec6abad Mon Sep 17 00:00:00 2001 From: Subramani Venkatesh Date: Tue, 22 Dec 2009 15:07:50 +0530 Subject: [PATCH 1302/1626] OMAP3: PM: DSS PM_WKEN to refill DMA Currently, DSS does not wakeup when there is a DMA request. DSS wake up event must be enabled so that the DMA request to refill the FIFO will wake up the CORE domain. Signed-off-by: Subramani Venkatesh Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 31762ca9f117..910a7acf542d 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -890,6 +890,10 @@ static void __init prcm_setup_regs(void) prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + /* Enable PM_WKEN to support DSS LPR */ + prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS, + OMAP3430_DSS_MOD, PM_WKEN); + /* Enable wakeups in PER */ prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 | OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 | From 6b34f9d4e60a4fb9f847533a207e31316603e840 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Thu, 14 Jan 2010 11:01:15 -0600 Subject: [PATCH 1303/1626] PM debug: Fix warning when no CONFIG_DEBUG_FS Fix following warning when CONFIG_DEBUG_FS wasn't selected: arch/arm/mach-omap2/pm-debug.c:57: warning: 'pm_dbg_init' declared 'static' but never defined Signed-off-by: Sergio Aguirre Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm-debug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 562d190cd66c..a0866268aa41 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -54,8 +54,6 @@ int omap2_pm_debug; regs[reg_count++].val = \ __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off))) -static int __init pm_dbg_init(void); - void omap2_pm_dump(int mode, int resume, unsigned int us) { struct reg { @@ -167,6 +165,8 @@ struct dentry *pm_dbg_dir; static int pm_dbg_init_done; +static int __init pm_dbg_init(void); + enum { DEBUG_FILE_COUNTERS = 0, DEBUG_FILE_TIMERS, From e5981fd6d77c63c003cac44ab52da72994e7ead3 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 6 Jan 2010 04:55:14 +0000 Subject: [PATCH 1304/1626] sparc: cpumask_of_node() should handle -1 as a node pcibus_to_node can return -1 if we cannot determine which node a pci bus is on. If passed -1, cpumask_of_node will negatively index the lookup array and pull in random data: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus 00000000,00000003,00000000,00000000 # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 64-65 Change cpumask_of_node to check for -1 and return cpu_all_mask in this case: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus ffffffff,ffffffff,ffffffff,ffffffff # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 0-127 Signed-off-by: Anton Blanchard Signed-off-by: David S. Miller --- arch/sparc/include/asm/topology_64.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h index 600a79035fa1..1c79f32734a0 100644 --- a/arch/sparc/include/asm/topology_64.h +++ b/arch/sparc/include/asm/topology_64.h @@ -12,7 +12,9 @@ static inline int cpu_to_node(int cpu) #define parent_node(node) (node) -#define cpumask_of_node(node) (&numa_cpumask_lookup_table[node]) +#define cpumask_of_node(node) ((node) == -1 ? \ + cpu_all_mask : \ + &numa_cpumask_lookup_table[node]) struct pci_bus; #ifdef CONFIG_PCI From 1091ce6215a1cab60c3a4601a569cb727ca8637a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 20 Jan 2010 19:30:49 -0800 Subject: [PATCH 1305/1626] sparc64: Fix IRQ ->set_affinity() methods. As noted by Benjamin Herrenschmidt, the generic IRQ layer only sets irq_desc[irq].affinity after ->set_affinity() succeeds. So we have to use the passed in cpumask. Signed-off-by: David S. Miller --- arch/sparc/kernel/irq_64.c | 37 ++++++++++++++++++++++++++++--------- 1 file changed, 28 insertions(+), 9 deletions(-) diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index 8d6882bb480a..f2179cce1e4d 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -250,12 +250,12 @@ struct irq_handler_data { }; #ifdef CONFIG_SMP -static int irq_choose_cpu(unsigned int virt_irq) +static int irq_choose_cpu(unsigned int virt_irq, const struct cpumask *affinity) { cpumask_t mask; int cpuid; - cpumask_copy(&mask, irq_desc[virt_irq].affinity); + cpumask_copy(&mask, affinity); if (cpus_equal(mask, cpu_online_map)) { cpuid = map_to_cpu(virt_irq); } else { @@ -268,7 +268,7 @@ static int irq_choose_cpu(unsigned int virt_irq) return cpuid; } #else -static int irq_choose_cpu(unsigned int virt_irq) +static int irq_choose_cpu(unsigned int virt_irq, const struct cpumask *affinity) { return real_hard_smp_processor_id(); } @@ -282,7 +282,8 @@ static void sun4u_irq_enable(unsigned int virt_irq) unsigned long cpuid, imap, val; unsigned int tid; - cpuid = irq_choose_cpu(virt_irq); + cpuid = irq_choose_cpu(virt_irq, + irq_desc[virt_irq].affinity); imap = data->imap; tid = sun4u_compute_tid(imap, cpuid); @@ -299,7 +300,24 @@ static void sun4u_irq_enable(unsigned int virt_irq) static int sun4u_set_affinity(unsigned int virt_irq, const struct cpumask *mask) { - sun4u_irq_enable(virt_irq); + struct irq_handler_data *data = get_irq_chip_data(virt_irq); + + if (likely(data)) { + unsigned long cpuid, imap, val; + unsigned int tid; + + cpuid = irq_choose_cpu(virt_irq, mask); + imap = data->imap; + + tid = sun4u_compute_tid(imap, cpuid); + + val = upa_readq(imap); + val &= ~(IMAP_TID_UPA | IMAP_TID_JBUS | + IMAP_AID_SAFARI | IMAP_NID_SAFARI); + val |= tid | IMAP_VALID; + upa_writeq(val, imap); + upa_writeq(ICLR_IDLE, data->iclr); + } return 0; } @@ -340,7 +358,8 @@ static void sun4u_irq_eoi(unsigned int virt_irq) static void sun4v_irq_enable(unsigned int virt_irq) { unsigned int ino = virt_irq_table[virt_irq].dev_ino; - unsigned long cpuid = irq_choose_cpu(virt_irq); + unsigned long cpuid = irq_choose_cpu(virt_irq, + irq_desc[virt_irq].affinity); int err; err = sun4v_intr_settarget(ino, cpuid); @@ -361,7 +380,7 @@ static int sun4v_set_affinity(unsigned int virt_irq, const struct cpumask *mask) { unsigned int ino = virt_irq_table[virt_irq].dev_ino; - unsigned long cpuid = irq_choose_cpu(virt_irq); + unsigned long cpuid = irq_choose_cpu(virt_irq, mask); int err; err = sun4v_intr_settarget(ino, cpuid); @@ -403,7 +422,7 @@ static void sun4v_virq_enable(unsigned int virt_irq) unsigned long cpuid, dev_handle, dev_ino; int err; - cpuid = irq_choose_cpu(virt_irq); + cpuid = irq_choose_cpu(virt_irq, irq_desc[virt_irq].affinity); dev_handle = virt_irq_table[virt_irq].dev_handle; dev_ino = virt_irq_table[virt_irq].dev_ino; @@ -433,7 +452,7 @@ static int sun4v_virt_set_affinity(unsigned int virt_irq, unsigned long cpuid, dev_handle, dev_ino; int err; - cpuid = irq_choose_cpu(virt_irq); + cpuid = irq_choose_cpu(virt_irq, mask); dev_handle = virt_irq_table[virt_irq].dev_handle; dev_ino = virt_irq_table[virt_irq].dev_ino; From 50b926e439620c469565e8be0f28be78f5fca1ce Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Mon, 4 Jan 2010 14:44:56 +0100 Subject: [PATCH 1306/1626] sched: Fix vmark regression on big machines SD_PREFER_SIBLING is set at the CPU domain level if power saving isn't enabled, leading to many cache misses on large machines as we traverse looking for an idle shared cache to wake to. Change the enabler of select_idle_sibling() to SD_SHARE_PKG_RESOURCES, and enable same at the sibling domain level. Reported-by: Lin Ming Signed-off-by: Mike Galbraith Signed-off-by: Peter Zijlstra LKML-Reference: <1262612696.15495.15.camel@marge.simson.net> Signed-off-by: Ingo Molnar --- include/linux/topology.h | 2 +- kernel/sched_fair.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/topology.h b/include/linux/topology.h index 57e63579bfdd..5b81156780b1 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -99,7 +99,7 @@ int arch_update_cpu_topology(void); | 1*SD_WAKE_AFFINE \ | 1*SD_SHARE_CPUPOWER \ | 0*SD_POWERSAVINGS_BALANCE \ - | 0*SD_SHARE_PKG_RESOURCES \ + | 1*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ | 0*SD_PREFER_SIBLING \ , \ diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 42ac3c9f66f6..8fe7ee81c552 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1508,7 +1508,7 @@ static int select_task_rq_fair(struct task_struct *p, int sd_flag, int wake_flag * If there's an idle sibling in this domain, make that * the wake_affine target instead of the current cpu. */ - if (tmp->flags & SD_PREFER_SIBLING) + if (tmp->flags & SD_SHARE_PKG_RESOURCES) target = select_idle_sibling(p, tmp, target); if (target >= 0) { From 6d558c3ac9b6508d26fd5cadccce51fc9d726b1c Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Mon, 11 Jan 2010 14:21:25 +0800 Subject: [PATCH 1307/1626] sched: Reassign prev and switch_count when reacquire_kernel_lock() fail Assume A->B schedule is processing, if B have acquired BKL before and it need reschedule this time. Then on B's context, it will go to need_resched_nonpreemptible for reschedule. But at this time, prev and switch_count are related to A. It's wrong and will lead to incorrect scheduler statistics. Signed-off-by: Yong Zhang Signed-off-by: Peter Zijlstra LKML-Reference: <2674af741001102238w7b0ddcadref00d345e2181d11@mail.gmail.com> Signed-off-by: Ingo Molnar --- kernel/sched.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index c535cc4f6428..4508fe7048be 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5530,8 +5530,11 @@ need_resched_nonpreemptible: post_schedule(rq); - if (unlikely(reacquire_kernel_lock(current) < 0)) + if (unlikely(reacquire_kernel_lock(current) < 0)) { + prev = rq->curr; + switch_count = &prev->nivcsw; goto need_resched_nonpreemptible; + } preempt_enable_no_resched(); if (need_resched()) From fe432200abb0d64f409895168d9ad8fbb9d8e6c6 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 18 Jan 2010 09:08:26 +0100 Subject: [PATCH 1308/1626] perf: Fix perf_event_do_pending() fallback callsite Paul questioned the context in which we should call perf_event_do_pending(). After looking at that I found that it should be called from IRQ context these days, however the fallback call-site is placed in softirq context. Ammend this by placing the callback in the IRQ timer path. Reported-by: Paul Mackerras Signed-off-by: Peter Zijlstra LKML-Reference: <1263374859.4244.192.camel@laptop> Signed-off-by: Ingo Molnar --- kernel/timer.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/kernel/timer.c b/kernel/timer.c index 15533b792397..c61a7949387f 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1198,6 +1198,7 @@ void update_process_times(int user_tick) run_local_timers(); rcu_check_callbacks(cpu, user_tick); printk_tick(); + perf_event_do_pending(); scheduler_tick(); run_posix_cpu_timers(p); } @@ -1209,8 +1210,6 @@ static void run_timer_softirq(struct softirq_action *h) { struct tvec_base *base = __get_cpu_var(tvec_bases); - perf_event_do_pending(); - hrtimer_run_pending(); if (time_after_eq(jiffies, base->timer_jiffies)) From 22e190851f8709c48baf00ed9ce6144cdc54d025 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 18 Jan 2010 09:12:32 +0100 Subject: [PATCH 1309/1626] perf: Honour event state for aux stream data Anton reported that perf record kept receiving events even after calling ioctl(PERF_EVENT_IOC_DISABLE). It turns out that FORK,COMM and MMAP events didn't respect the disabled state and kept flowing in. Reported-by: Anton Blanchard Signed-off-by: Peter Zijlstra Tested-by: Anton Blanchard LKML-Reference: <1263459187.4244.265.camel@laptop> CC: stable@kernel.org Signed-off-by: Ingo Molnar --- kernel/perf_event.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 603c0d8b5df1..d27746bd3a06 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -3268,6 +3268,9 @@ static void perf_event_task_output(struct perf_event *event, static int perf_event_task_match(struct perf_event *event) { + if (event->state != PERF_EVENT_STATE_ACTIVE) + return 0; + if (event->cpu != -1 && event->cpu != smp_processor_id()) return 0; @@ -3377,6 +3380,9 @@ static void perf_event_comm_output(struct perf_event *event, static int perf_event_comm_match(struct perf_event *event) { + if (event->state != PERF_EVENT_STATE_ACTIVE) + return 0; + if (event->cpu != -1 && event->cpu != smp_processor_id()) return 0; @@ -3494,6 +3500,9 @@ static void perf_event_mmap_output(struct perf_event *event, static int perf_event_mmap_match(struct perf_event *event, struct perf_mmap_event *mmap_event) { + if (event->state != PERF_EVENT_STATE_ACTIVE) + return 0; + if (event->cpu != -1 && event->cpu != smp_processor_id()) return 0; From 92b6759857ea3ad19bc6871044e373f6251841d3 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 18 Jan 2010 14:02:16 +0100 Subject: [PATCH 1310/1626] perf: Change the is_software_event() definition The is_software_event() definition always confuses me because its an exclusive expression, make it an inclusive one. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index c66b34f75eea..8fa71874113f 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -814,9 +814,14 @@ extern int perf_event_overflow(struct perf_event *event, int nmi, */ static inline int is_software_event(struct perf_event *event) { - return (event->attr.type != PERF_TYPE_RAW) && - (event->attr.type != PERF_TYPE_HARDWARE) && - (event->attr.type != PERF_TYPE_HW_CACHE); + switch (event->attr.type) { + case PERF_TYPE_SOFTWARE: + case PERF_TYPE_TRACEPOINT: + /* for now the breakpoint stuff also works as software event */ + case PERF_TYPE_BREAKPOINT: + return 1; + } + return 0; } extern atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX]; From b27d515a49169e5e2a92d621faac761074a8c5b1 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Mon, 18 Jan 2010 10:58:01 +0200 Subject: [PATCH 1311/1626] perf: x86: Add support for the ANY bit Propagate the ANY bit into the fixed counter config for v3 and higher. Signed-off-by: Stephane Eranian [a.p.zijlstra@chello.nl: split from larger patch] Signed-off-by: Peter Zijlstra LKML-Reference: <4b5430c6.0f975e0a.1bf9.ffff85fe@mx.google.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/perf_event.h | 1 + arch/x86/kernel/cpu/perf_event.c | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h index 8d9f8548a870..1380367dabd9 100644 --- a/arch/x86/include/asm/perf_event.h +++ b/arch/x86/include/asm/perf_event.h @@ -19,6 +19,7 @@ #define MSR_ARCH_PERFMON_EVENTSEL1 0x187 #define ARCH_PERFMON_EVENTSEL0_ENABLE (1 << 22) +#define ARCH_PERFMON_EVENTSEL_ANY (1 << 21) #define ARCH_PERFMON_EVENTSEL_INT (1 << 20) #define ARCH_PERFMON_EVENTSEL_OS (1 << 17) #define ARCH_PERFMON_EVENTSEL_USR (1 << 16) diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index d616c06e99b4..8c1c07073ccc 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1343,6 +1343,13 @@ intel_pmu_enable_fixed(struct hw_perf_event *hwc, int __idx) bits |= 0x2; if (hwc->config & ARCH_PERFMON_EVENTSEL_OS) bits |= 0x1; + + /* + * ANY bit is supported in v3 and up + */ + if (x86_pmu.version > 2 && hwc->config & ARCH_PERFMON_EVENTSEL_ANY) + bits |= 0x4; + bits <<= (idx * 4); mask = 0xfULL << (idx * 4); From 71318da9d2a46b9986dcecb44b7ae978753ca4dd Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Thu, 21 Jan 2010 12:12:52 +0300 Subject: [PATCH 1312/1626] ARM: MX3: Fixed typo in declared enum type name. To distinguish between mx31lite and mx31lilly boards better to use different enum types. Signed-off-by: Vladimir Zapolskiy Acked-by: Daniel Mack Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/board-mx31lite.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h index 0184b638c268..2b2da0367578 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h @@ -25,7 +25,7 @@ #ifndef __ASSEMBLY__ -enum mx31lilly_boards { +enum mx31lite_boards { MX31LITE_NOBOARD = 0, MX31LITE_DB = 1, }; From 88f5004430babb836cfce886d5d54c82166f8ba4 Mon Sep 17 00:00:00 2001 From: Yongseok Koh Date: Tue, 19 Jan 2010 17:33:49 +0900 Subject: [PATCH 1313/1626] vmalloc: remove BUG_ON due to racy counting of VM_LAZY_FREE In free_unmap_area_noflush(), va->flags is marked as VM_LAZY_FREE first, and then vmap_lazy_nr is increased atomically. But, in __purge_vmap_area_lazy(), while traversing of vmap_are_list, nr is counted by checking VM_LAZY_FREE is set to va->flags. After counting the variable nr, kernel reads vmap_lazy_nr atomically and checks a BUG_ON condition whether nr is greater than vmap_lazy_nr to prevent vmap_lazy_nr from being negative. The problem is that, if interrupted right after marking VM_LAZY_FREE, increment of vmap_lazy_nr can be delayed. Consequently, BUG_ON condition can be met because nr is counted more than vmap_lazy_nr. It is highly probable when vmalloc/vfree are called frequently. This scenario have been verified by adding delay between marking VM_LAZY_FREE and increasing vmap_lazy_nr in free_unmap_area_noflush(). Even the vmap_lazy_nr is for checking high watermark, it never be the strict watermark. Although the BUG_ON condition is to prevent vmap_lazy_nr from being negative, vmap_lazy_nr is signed variable. So, it could go down to negative value temporarily. Consequently, removing the BUG_ON condition is proper. A possible BUG_ON message is like the below. kernel BUG at mm/vmalloc.c:517! invalid opcode: 0000 [#1] SMP EIP: 0060:[] EFLAGS: 00010297 CPU: 3 EIP is at __purge_vmap_area_lazy+0x144/0x150 EAX: ee8a8818 EBX: c08e77d4 ECX: e7c7ae40 EDX: c08e77ec ESI: 000081fe EDI: e7c7ae60 EBP: e7c7ae64 ESP: e7c7ae3c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Call Trace: [] free_unmap_vmap_area_noflush+0x69/0x70 [] remove_vm_area+0x22/0x70 [] __vunmap+0x45/0xe0 [] vmalloc+0x2c/0x30 Code: 8d 59 e0 eb 04 66 90 89 cb 89 d0 e8 87 fe ff ff 8b 43 20 89 da 8d 48 e0 8d 43 20 3b 04 24 75 e7 fe 05 a8 a5 a3 c0 e9 78 ff ff ff <0f> 0b eb fe 90 8d b4 26 00 00 00 00 56 89 c6 b8 ac a5 a3 c0 31 EIP: [] __purge_vmap_area_lazy+0x144/0x150 SS:ESP 0068:e7c7ae3c [ See also http://marc.info/?l=linux-kernel&m=126335856228090&w=2 ] Signed-off-by: Yongseok Koh Reviewed-by: Minchan Kim Cc: Nick Piggin Cc: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmalloc.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 37e69295f250..d55d905463eb 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -555,10 +555,8 @@ static void __purge_vmap_area_lazy(unsigned long *start, unsigned long *end, } rcu_read_unlock(); - if (nr) { - BUG_ON(nr > atomic_read(&vmap_lazy_nr)); + if (nr) atomic_sub(nr, &vmap_lazy_nr); - } if (nr || force_flush) flush_tlb_kernel_range(*start, *end); From fabf318e5e4bda0aca2b0d617b191884fda62703 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 21 Jan 2010 21:04:57 +0100 Subject: [PATCH 1314/1626] sched: Fix fork vs hotplug vs cpuset namespaces There are a number of issues: 1) TASK_WAKING vs cgroup_clone (cpusets) copy_process(): sched_fork() child->state = TASK_WAKING; /* waiting for wake_up_new_task() */ if (current->nsproxy != p->nsproxy) ns_cgroup_clone() cgroup_clone() mutex_lock(inode->i_mutex) mutex_lock(cgroup_mutex) cgroup_attach_task() ss->can_attach() ss->attach() [ -> cpuset_attach() ] cpuset_attach_task() set_cpus_allowed_ptr(); while (child->state == TASK_WAKING) cpu_relax(); will deadlock the system. 2) cgroup_clone (cpusets) vs copy_process So even if the above would work we still have: copy_process(): if (current->nsproxy != p->nsproxy) ns_cgroup_clone() cgroup_clone() mutex_lock(inode->i_mutex) mutex_lock(cgroup_mutex) cgroup_attach_task() ss->can_attach() ss->attach() [ -> cpuset_attach() ] cpuset_attach_task() set_cpus_allowed_ptr(); ... p->cpus_allowed = current->cpus_allowed over-writing the modified cpus_allowed. 3) fork() vs hotplug if we unplug the child's cpu after the sanity check when the child gets attached to the task_list but before wake_up_new_task() shit will meet with fan. Solve all these issues by moving fork cpu selection into wake_up_new_task(). Reported-by: Serge E. Hallyn Tested-by: Serge E. Hallyn Signed-off-by: Peter Zijlstra LKML-Reference: <1264106190.4283.1314.camel@laptop> Signed-off-by: Thomas Gleixner --- kernel/fork.c | 15 --------------- kernel/sched.c | 39 +++++++++++++++++++++++++++------------ 2 files changed, 27 insertions(+), 27 deletions(-) diff --git a/kernel/fork.c b/kernel/fork.c index 5b2959b3ffc2..f88bd984df35 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1241,21 +1241,6 @@ static struct task_struct *copy_process(unsigned long clone_flags, /* Need tasklist lock for parent etc handling! */ write_lock_irq(&tasklist_lock); - /* - * The task hasn't been attached yet, so its cpus_allowed mask will - * not be changed, nor will its assigned CPU. - * - * The cpus_allowed mask of the parent may have changed after it was - * copied first time - so re-copy it here, then check the child's CPU - * to ensure it is on a valid CPU (and if not, just force it back to - * parent's CPU). This avoids alot of nasty races. - */ - p->cpus_allowed = current->cpus_allowed; - p->rt.nr_cpus_allowed = current->rt.nr_cpus_allowed; - if (unlikely(!cpu_isset(task_cpu(p), p->cpus_allowed) || - !cpu_online(task_cpu(p)))) - set_task_cpu(p, smp_processor_id()); - /* CLONE_PARENT re-uses the old parent */ if (clone_flags & (CLONE_PARENT|CLONE_THREAD)) { p->real_parent = current->real_parent; diff --git a/kernel/sched.c b/kernel/sched.c index 4508fe7048be..3a8fb30a91b1 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2320,14 +2320,12 @@ static int select_fallback_rq(int cpu, struct task_struct *p) } /* - * Called from: + * Gets called from 3 sites (exec, fork, wakeup), since it is called without + * holding rq->lock we need to ensure ->cpus_allowed is stable, this is done + * by: * - * - fork, @p is stable because it isn't on the tasklist yet - * - * - exec, @p is unstable, retry loop - * - * - wake-up, we serialize ->cpus_allowed against TASK_WAKING so - * we should be good. + * exec: is unstable, retry loop + * fork & wake-up: serialize ->cpus_allowed against TASK_WAKING */ static inline int select_task_rq(struct task_struct *p, int sd_flags, int wake_flags) @@ -2620,9 +2618,6 @@ void sched_fork(struct task_struct *p, int clone_flags) if (p->sched_class->task_fork) p->sched_class->task_fork(p); -#ifdef CONFIG_SMP - cpu = select_task_rq(p, SD_BALANCE_FORK, 0); -#endif set_task_cpu(p, cpu); #if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT) @@ -2652,6 +2647,21 @@ void wake_up_new_task(struct task_struct *p, unsigned long clone_flags) { unsigned long flags; struct rq *rq; + int cpu = get_cpu(); + +#ifdef CONFIG_SMP + /* + * Fork balancing, do it here and not earlier because: + * - cpus_allowed can change in the fork path + * - any previously selected cpu might disappear through hotplug + * + * We still have TASK_WAKING but PF_STARTING is gone now, meaning + * ->cpus_allowed is stable, we have preemption disabled, meaning + * cpu_online_mask is stable. + */ + cpu = select_task_rq(p, SD_BALANCE_FORK, 0); + set_task_cpu(p, cpu); +#endif rq = task_rq_lock(p, &flags); BUG_ON(p->state != TASK_WAKING); @@ -2665,6 +2675,7 @@ void wake_up_new_task(struct task_struct *p, unsigned long clone_flags) p->sched_class->task_woken(rq, p); #endif task_rq_unlock(rq, &flags); + put_cpu(); } #ifdef CONFIG_PREEMPT_NOTIFIERS @@ -7139,14 +7150,18 @@ int set_cpus_allowed_ptr(struct task_struct *p, const struct cpumask *new_mask) * the ->cpus_allowed mask from under waking tasks, which would be * possible when we change rq->lock in ttwu(), so synchronize against * TASK_WAKING to avoid that. + * + * Make an exception for freshly cloned tasks, since cpuset namespaces + * might move the task about, we have to validate the target in + * wake_up_new_task() anyway since the cpu might have gone away. */ again: - while (p->state == TASK_WAKING) + while (p->state == TASK_WAKING && !(p->flags & PF_STARTING)) cpu_relax(); rq = task_rq_lock(p, &flags); - if (p->state == TASK_WAKING) { + if (p->state == TASK_WAKING && !(p->flags & PF_STARTING)) { task_rq_unlock(rq, &flags); goto again; } From 92dcffb916d309aa01778bf8963a6932e4014d07 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 21 Jan 2010 15:31:35 -0800 Subject: [PATCH 1315/1626] Linux 2.6.33-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 5f333bf870f4..67d6cff6e4d4 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 33 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* From b81124696e6a47d5db02b2b3561d66d1392b0f2f Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Wed, 20 Jan 2010 12:41:13 -0800 Subject: [PATCH 1316/1626] wimax/i2400m: Add support for more i6x50 SKUs The Intel WiMax Wireless Link 6050 can show under more than one USB ID. Add support for all, introducing a generic flag (i2400mu->i6050) that denotes a 6x50 based device. Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/i2400m-usb.h | 2 ++ drivers/net/wimax/i2400m/usb.c | 12 +++++++++++- 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/net/wimax/i2400m/i2400m-usb.h b/drivers/net/wimax/i2400m/i2400m-usb.h index 5cc0f279417e..2d7c96d7e865 100644 --- a/drivers/net/wimax/i2400m/i2400m-usb.h +++ b/drivers/net/wimax/i2400m/i2400m-usb.h @@ -151,6 +151,7 @@ enum { /* Device IDs */ USB_DEVICE_ID_I6050 = 0x0186, + USB_DEVICE_ID_I6050_2 = 0x0188, }; @@ -234,6 +235,7 @@ struct i2400mu { u8 rx_size_auto_shrink; struct dentry *debugfs_dentry; + unsigned i6050:1; /* 1 if this is a 6050 based SKU */ }; diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c index 3b48681f8a0d..98f4f8c5fb68 100644 --- a/drivers/net/wimax/i2400m/usb.c +++ b/drivers/net/wimax/i2400m/usb.c @@ -478,7 +478,16 @@ int i2400mu_probe(struct usb_interface *iface, i2400m->bus_bm_wait_for_ack = i2400mu_bus_bm_wait_for_ack; i2400m->bus_bm_mac_addr_impaired = 0; - if (id->idProduct == USB_DEVICE_ID_I6050) { + switch (id->idProduct) { + case USB_DEVICE_ID_I6050: + case USB_DEVICE_ID_I6050_2: + i2400mu->i6050 = 1; + break; + default: + break; + } + + if (i2400mu->i6050) { i2400m->bus_fw_names = i2400mu_bus_fw_names_6050; i2400mu->endpoint_cfg.bulk_out = 0; i2400mu->endpoint_cfg.notification = 3; @@ -719,6 +728,7 @@ int i2400mu_post_reset(struct usb_interface *iface) static struct usb_device_id i2400mu_id_table[] = { { USB_DEVICE(0x8086, USB_DEVICE_ID_I6050) }, + { USB_DEVICE(0x8086, USB_DEVICE_ID_I6050_2) }, { USB_DEVICE(0x8086, 0x0181) }, { USB_DEVICE(0x8086, 0x1403) }, { USB_DEVICE(0x8086, 0x1405) }, From 1619ce111492d733d425acbacec9a2cb2ba16ed9 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Thu, 21 Jan 2010 22:56:58 +0100 Subject: [PATCH 1317/1626] hmt: adjust for new pwm_backlight->notify prototype Commit cfc38999f (backlight: Pass device through notify callback) added a struct device argument to the notify callback, but didn't update the user of it in mach-hmt.c Signed-off-by: Peter Korsgaard Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-hmt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c index cdd4b5378552..7619456f2ae8 100644 --- a/arch/arm/mach-s3c6410/mach-hmt.c +++ b/arch/arm/mach-s3c6410/mach-hmt.c @@ -82,7 +82,7 @@ static int hmt_bl_init(struct device *dev) return ret; } -static int hmt_bl_notify(int brightness) +static int hmt_bl_notify(struct device *dev, int brightness) { /* * translate from CIELUV/CIELAB L*->brightness, E.G. from From 5c3db36bf68bb9f682a0188d81dc184f5e62a6e4 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 23 Oct 2009 19:03:47 +0300 Subject: [PATCH 1318/1626] OMAP2/3: DMTIMER: Clear pending interrupts when stopping a timer OMAP GP timers keep running for a few cycles after they are stopped, which can cause the timer to expire and generate an interrupt. The pending interrupt will prevent e.g. OMAP from entering suspend, thus we ack it manually. Only applicable on OMAP2/3/4. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 64f407ee0f4e..08ccf8922520 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -551,6 +551,19 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer) if (l & OMAP_TIMER_CTRL_ST) { l &= ~0x1; omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) + /* Readback to make sure write has completed */ + omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + /* + * Wait for functional clock period x 3.5 to make sure that + * timer is stopped + */ + udelay(3500000 / clk_get_rate(timer->fclk) + 1); + /* Ack possibly pending interrupt */ + omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, + OMAP_TIMER_INT_OVERFLOW); +#endif } } EXPORT_SYMBOL_GPL(omap_dm_timer_stop); From 26d92f9276a56d55511a427fb70bd70886af647a Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Thu, 21 Jan 2010 22:52:08 -0800 Subject: [PATCH 1319/1626] be2net: fix bug in rx page posting Pages are posted to the rxq in such a way that more than one frag can share the page. The last frag that uses the page unmaps the page. In the case when a page is not fully used (due to lack of space in rxq) the last frag that uses the page is not being set as a "last_page_user"; instead, the next frag in the rxq is incorrectly being set. The fix has also been tested on ppc64 with 64k pages... Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 3a1f7902c16d..33ab8c7f14fe 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -910,7 +910,7 @@ static inline struct page *be_alloc_pages(u32 size) static void be_post_rx_frags(struct be_adapter *adapter) { struct be_rx_page_info *page_info_tbl = adapter->rx_obj.page_info_tbl; - struct be_rx_page_info *page_info = NULL; + struct be_rx_page_info *page_info = NULL, *prev_page_info = NULL; struct be_queue_info *rxq = &adapter->rx_obj.q; struct page *pagep = NULL; struct be_eth_rx_d *rxd; @@ -941,7 +941,6 @@ static void be_post_rx_frags(struct be_adapter *adapter) rxd = queue_head_node(rxq); rxd->fragpa_lo = cpu_to_le32(frag_dmaaddr & 0xFFFFFFFF); rxd->fragpa_hi = cpu_to_le32(upper_32_bits(frag_dmaaddr)); - queue_head_inc(rxq); /* Any space left in the current big page for another frag? */ if ((page_offset + rx_frag_size + rx_frag_size) > @@ -949,10 +948,13 @@ static void be_post_rx_frags(struct be_adapter *adapter) pagep = NULL; page_info->last_page_user = true; } + + prev_page_info = page_info; + queue_head_inc(rxq); page_info = &page_info_tbl[rxq->head]; } if (pagep) - page_info->last_page_user = true; + prev_page_info->last_page_user = true; if (posted) { atomic_add(posted, &rxq->used); From 98ec286e016a028678cc943b1a1f87668ad447c8 Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Thu, 21 Jan 2010 19:33:14 +0100 Subject: [PATCH 1320/1626] drbd: fix max_segment_size initialization blk_queue_make_request() internally calls blk_set_default_limits(), so calling blk_queue_max_segment_size() before is useless. Ergo: move the call to blk_queue_max_segment_size() down a few lines. Impact: If, after a fresh modprobe, you first connect a Diskless drbd, then attach, this could result in a DRBD Protocol Error at first. The next connection attempt would then succeeded. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index e898ad9eb1c3..ab871e00ffc5 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -2973,7 +2973,6 @@ struct drbd_conf *drbd_new_device(unsigned int minor) goto out_no_q; mdev->rq_queue = q; q->queuedata = mdev; - blk_queue_max_segment_size(q, DRBD_MAX_SEGMENT_SIZE); disk = alloc_disk(1); if (!disk) @@ -2997,6 +2996,7 @@ struct drbd_conf *drbd_new_device(unsigned int minor) q->backing_dev_info.congested_data = mdev; blk_queue_make_request(q, drbd_make_request_26); + blk_queue_max_segment_size(q, DRBD_MAX_SEGMENT_SIZE); blk_queue_bounce_limit(q, BLK_BOUNCE_ANY); blk_queue_merge_bvec(q, drbd_merge_bvec); q->queue_lock = &mdev->req_lock; /* needed since we use */ From d91afd15b041f27d34859c79afa9e172018a86f4 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 22 Jan 2010 16:40:20 +0100 Subject: [PATCH 1321/1626] x86/amd-iommu: Fix possible integer overflow The variable i in this function could be increased to over 2**32 which would result in an integer overflow when using int. Fix it by changing i to unsigned long. Cc: stable@kernel.org Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 23824fef789c..c2ccbd7b862f 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -980,7 +980,7 @@ static int alloc_new_range(struct dma_ops_domain *dma_dom, { int index = dma_dom->aperture_size >> APERTURE_RANGE_SHIFT; struct amd_iommu *iommu; - int i; + unsigned long i; #ifdef CONFIG_IOMMU_STRESS populate = false; From 2ca762790caf822f7b61430fbaffa3ae4219977f Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 22 Jan 2010 16:45:31 +0100 Subject: [PATCH 1322/1626] x86/amd-iommu: Fix NULL pointer dereference in __detach_device() In the __detach_device function the reference count for a device-domain binding may become zero. This results in the device being removed from the domain and dev_data->domain will be NULL. This is bad because this pointer is dereferenced when trying to unlock the domain->lock. This patch fixes the issue by keeping the domain in a seperate variable. Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index c2ccbd7b862f..4478a48198a8 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -1489,11 +1489,14 @@ static void __detach_device(struct device *dev) { struct iommu_dev_data *dev_data = get_dev_data(dev); struct iommu_dev_data *alias_data; + struct protection_domain *domain; unsigned long flags; BUG_ON(!dev_data->domain); - spin_lock_irqsave(&dev_data->domain->lock, flags); + domain = dev_data->domain; + + spin_lock_irqsave(&domain->lock, flags); if (dev_data->alias != dev) { alias_data = get_dev_data(dev_data->alias); @@ -1504,7 +1507,7 @@ static void __detach_device(struct device *dev) if (atomic_dec_and_test(&dev_data->bind)) do_detach(dev); - spin_unlock_irqrestore(&dev_data->domain->lock, flags); + spin_unlock_irqrestore(&domain->lock, flags); /* * If we run in passthrough mode the device must be assigned to the From f5325094379158e6b876ea0010c807bf7890ec8f Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 22 Jan 2010 17:44:35 +0100 Subject: [PATCH 1323/1626] x86/amd-iommu: Fix IOMMU-API initialization for iommu=pt This patch moves the initialization of the iommu-api out of the dma-ops initialization code. This ensures that the iommu-api is initialized even with iommu=pt. Cc: stable@kernel.org Signed-off-by: Joerg Roedel --- arch/x86/include/asm/amd_iommu_proto.h | 1 + arch/x86/kernel/amd_iommu.c | 8 ++++++-- arch/x86/kernel/amd_iommu_init.c | 3 +++ 3 files changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/amd_iommu_proto.h b/arch/x86/include/asm/amd_iommu_proto.h index 4d817f9e6e77..d2544f1d705d 100644 --- a/arch/x86/include/asm/amd_iommu_proto.h +++ b/arch/x86/include/asm/amd_iommu_proto.h @@ -31,6 +31,7 @@ extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu); extern int amd_iommu_init_devices(void); extern void amd_iommu_uninit_devices(void); extern void amd_iommu_init_notifier(void); +extern void amd_iommu_init_api(void); #ifndef CONFIG_AMD_IOMMU_STATS static inline void amd_iommu_stats_init(void) { } diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 4478a48198a8..751ce73c6e1b 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -2221,6 +2221,12 @@ static struct dma_map_ops amd_iommu_dma_ops = { /* * The function which clues the AMD IOMMU driver into dma_ops. */ + +void __init amd_iommu_init_api(void) +{ + register_iommu(&amd_iommu_ops); +} + int __init amd_iommu_init_dma_ops(void) { struct amd_iommu *iommu; @@ -2256,8 +2262,6 @@ int __init amd_iommu_init_dma_ops(void) /* Make the driver finally visible to the drivers */ dma_ops = &amd_iommu_dma_ops; - register_iommu(&amd_iommu_ops); - amd_iommu_stats_init(); return 0; diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index fb490ce7dd55..9dc91b431470 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -1292,9 +1292,12 @@ static int __init amd_iommu_init(void) ret = amd_iommu_init_passthrough(); else ret = amd_iommu_init_dma_ops(); + if (ret) goto free; + amd_iommu_init_api(); + amd_iommu_init_notifier(); enable_iommus(); From d3ad9373b7c29b63d5e8460a69453718d200cc3b Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 22 Jan 2010 17:55:27 +0100 Subject: [PATCH 1324/1626] x86/amd-iommu: Fix deassignment of a device from the pt_domain Deassigning a device from the passthrough domain does not work and breaks device assignment to kvm guests. This patch fixes the issue. Cc: stable@kernel.org Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 751ce73c6e1b..adb0ba025702 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -1511,9 +1511,11 @@ static void __detach_device(struct device *dev) /* * If we run in passthrough mode the device must be assigned to the - * passthrough domain if it is detached from any other domain + * passthrough domain if it is detached from any other domain. + * Make sure we can deassign from the pt_domain itself. */ - if (iommu_pass_through && dev_data->domain == NULL) + if (iommu_pass_through && + (dev_data->domain == NULL && domain != pt_domain)) __attach_device(dev, pt_domain); } From aeb583d08172e038552bdefe0a79a9aa9e2ecd7c Mon Sep 17 00:00:00 2001 From: Thiago Farina Date: Mon, 18 Jan 2010 18:57:33 -0500 Subject: [PATCH 1325/1626] lib/dma-debug.c: mark file-local struct symbol static. warning: symbol 'filter_fops' was not declared. Should it be static? Signed-off-by: Thiago Farina Signed-off-by: Joerg Roedel --- lib/dma-debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/dma-debug.c b/lib/dma-debug.c index 739974460c32..e03995851e60 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -587,7 +587,7 @@ out_unlock: return count; } -const struct file_operations filter_fops = { +static const struct file_operations filter_fops = { .read = filter_read, .write = filter_write, }; From 3a5fc0e40cb467e692737bc798bc99773c81e1e2 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 20 Jan 2010 12:10:47 -0800 Subject: [PATCH 1326/1626] x86: Set hotpluggable nodes in nodes_possible_map nodes_possible_map does not currently include nodes that have SRAT entries that are all ACPI_SRAT_MEM_HOT_PLUGGABLE since the bit is cleared in nodes_parsed if it does not have an online address range. Unequivocally setting the bit in nodes_parsed is insufficient since existing code, such as acpi_get_nodes(), assumes all nodes in the map have online address ranges. In fact, all code using nodes_parsed assumes such nodes represent an address range of online memory. nodes_possible_map is created by unioning nodes_parsed and cpu_nodes_parsed; the former represents nodes with online memory and the latter represents memoryless nodes. We now set the bit for hotpluggable nodes in cpu_nodes_parsed so that it also gets set in nodes_possible_map. [ hpa: Haicheng Li points out that this makes the naming of the variable cpu_nodes_parsed somewhat counterintuitive. However, leave it as is in the interest of keeping the pure bug fix patch small. ] Signed-off-by: David Rientjes Tested-by: Haicheng Li LKML-Reference: Cc: Signed-off-by: H. Peter Anvin --- arch/x86/mm/srat_64.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index a27124185fc1..28c68762648f 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -229,9 +229,11 @@ update_nodes_add(int node, unsigned long start, unsigned long end) printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n"); } - if (changed) + if (changed) { + node_set(node, cpu_nodes_parsed); printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n", nd->start, nd->end); + } } /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ From 73472a46b5b28116b145fb5fc05242c1aa8e1461 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Thu, 21 Jan 2010 11:09:52 -0800 Subject: [PATCH 1327/1626] x86: Disable HPET MSI on ATI SB700/SB800 HPET MSI on platforms with ATI SB700/SB800 as they seem to have some side-effects on floppy DMA. Do not use HPET MSI on such platforms. Original problem report from Mark Hounschell http://lkml.indiana.edu/hypermail/linux/kernel/0912.2/01118.html [ This patch needs to go to stable as well. But, there are some conflicts that prevents the patch from going as is. I can rebase/resubmit to stable once the patch goes upstream. hpa: still Cc:'ing stable@ as an FYI. ] Tested-by: Mark Hounschell Signed-off-by: Venkatesh Pallipadi Cc: LKML-Reference: <20100121190952.GA32523@linux-os.sc.intel.com> Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/hpet.h | 1 + arch/x86/kernel/hpet.c | 8 ++++++++ arch/x86/kernel/quirks.c | 13 +++++++++++++ 3 files changed, 22 insertions(+) diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h index 5d89fd2a3690..1d5c08a1bdfd 100644 --- a/arch/x86/include/asm/hpet.h +++ b/arch/x86/include/asm/hpet.h @@ -67,6 +67,7 @@ extern unsigned long hpet_address; extern unsigned long force_hpet_address; extern u8 hpet_blockid; extern int hpet_force_user; +extern u8 hpet_msi_disable; extern int is_hpet_enabled(void); extern int hpet_enable(void); extern void hpet_disable(void); diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index ba6e65884603..ad80a1c718c6 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -34,6 +34,8 @@ */ unsigned long hpet_address; u8 hpet_blockid; /* OS timer block num */ +u8 hpet_msi_disable; + #ifdef CONFIG_PCI_MSI static unsigned long hpet_num_timers; #endif @@ -596,6 +598,9 @@ static void hpet_msi_capability_lookup(unsigned int start_timer) unsigned int num_timers_used = 0; int i; + if (hpet_msi_disable) + return; + if (boot_cpu_has(X86_FEATURE_ARAT)) return; id = hpet_readl(HPET_ID); @@ -928,6 +933,9 @@ static __init int hpet_late_init(void) hpet_reserve_platform_timers(hpet_readl(HPET_ID)); hpet_print_config(); + if (hpet_msi_disable) + return 0; + if (boot_cpu_has(X86_FEATURE_ARAT)) return 0; diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index 18093d7498f0..12e9feaa2f7a 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -491,6 +491,19 @@ void force_hpet_resume(void) break; } } + +/* + * HPET MSI on some boards (ATI SB700/SB800) has side effect on + * floppy DMA. Disable HPET MSI on such platforms. + */ +static void force_disable_hpet_msi(struct pci_dev *unused) +{ + hpet_msi_disable = 1; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, + force_disable_hpet_msi); + #endif #if defined(CONFIG_PCI) && defined(CONFIG_NUMA) From 3b2e3d85aeb80769fb96c15ee4f6e14135328471 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 22 Jan 2010 21:34:56 +0100 Subject: [PATCH 1328/1626] Revert "x86: ucode-amd: Load ucode-patches once ..." Commit d1c84f79a6ba992dc01e312c44a21496303874d6 leads to a regression when microcode_amd.c is compiled into the kernel. It causes a big boot delay because the firmware is not available. See http://marc.info/?l=linux-kernel&m=126267290920060 It also renders the reload sysfs attribute useless. Fixing this is too intrusive for an -rc5 kernel. Thus I'd like to restore the microcode loading behaviour of kernel 2.6.32. CC: Gene Heskett Signed-off-by: Andreas Herrmann LKML-Reference: <20100122203456.GB13792@alberich.amd.com> Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/microcode.h | 2 -- arch/x86/kernel/microcode_amd.c | 44 ++++++++++---------------------- arch/x86/kernel/microcode_core.c | 6 ----- 3 files changed, 13 insertions(+), 39 deletions(-) diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h index c24ca9a56458..ef51b501e22a 100644 --- a/arch/x86/include/asm/microcode.h +++ b/arch/x86/include/asm/microcode.h @@ -12,8 +12,6 @@ struct device; enum ucode_state { UCODE_ERROR, UCODE_OK, UCODE_NFOUND }; struct microcode_ops { - void (*init)(struct device *device); - void (*fini)(void); enum ucode_state (*request_microcode_user) (int cpu, const void __user *buf, size_t size); diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 37542b67c57e..e1af7c055c7d 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -36,9 +36,6 @@ MODULE_LICENSE("GPL v2"); #define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000 #define UCODE_UCODE_TYPE 0x00000001 -const struct firmware *firmware; -static int supported_cpu; - struct equiv_cpu_entry { u32 installed_cpu; u32 fixed_errata_mask; @@ -77,12 +74,15 @@ static struct equiv_cpu_entry *equiv_cpu_table; static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) { + struct cpuinfo_x86 *c = &cpu_data(cpu); u32 dummy; - if (!supported_cpu) - return -1; - memset(csig, 0, sizeof(*csig)); + if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) { + pr_warning("microcode: CPU%d: AMD CPU family 0x%x not " + "supported\n", cpu, c->x86); + return -1; + } rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy); pr_info("CPU%d: patch_level=0x%x\n", cpu, csig->rev); return 0; @@ -294,10 +294,14 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) static enum ucode_state request_microcode_fw(int cpu, struct device *device) { + const char *fw_name = "amd-ucode/microcode_amd.bin"; + const struct firmware *firmware; enum ucode_state ret; - if (firmware == NULL) + if (request_firmware(&firmware, fw_name, device)) { + printk(KERN_ERR "microcode: failed to load file %s\n", fw_name); return UCODE_NFOUND; + } if (*(u32 *)firmware->data != UCODE_MAGIC) { pr_err("invalid UCODE_MAGIC (0x%08x)\n", @@ -307,6 +311,8 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device) ret = generic_load_microcode(cpu, firmware->data, firmware->size); + release_firmware(firmware); + return ret; } @@ -325,31 +331,7 @@ static void microcode_fini_cpu_amd(int cpu) uci->mc = NULL; } -void init_microcode_amd(struct device *device) -{ - const char *fw_name = "amd-ucode/microcode_amd.bin"; - struct cpuinfo_x86 *c = &boot_cpu_data; - - WARN_ON(c->x86_vendor != X86_VENDOR_AMD); - - if (c->x86 < 0x10) { - pr_warning("AMD CPU family 0x%x not supported\n", c->x86); - return; - } - supported_cpu = 1; - - if (request_firmware(&firmware, fw_name, device)) - pr_err("failed to load file %s\n", fw_name); -} - -void fini_microcode_amd(void) -{ - release_firmware(firmware); -} - static struct microcode_ops microcode_amd_ops = { - .init = init_microcode_amd, - .fini = fini_microcode_amd, .request_microcode_user = request_microcode_user, .request_microcode_fw = request_microcode_fw, .collect_cpu_info = collect_cpu_info_amd, diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 0c8632433090..cceb5bc3c3c2 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -521,9 +521,6 @@ static int __init microcode_init(void) return PTR_ERR(microcode_pdev); } - if (microcode_ops->init) - microcode_ops->init(µcode_pdev->dev); - get_online_cpus(); mutex_lock(µcode_mutex); @@ -566,9 +563,6 @@ static void __exit microcode_exit(void) platform_device_unregister(microcode_pdev); - if (microcode_ops->fini) - microcode_ops->fini(); - microcode_ops = NULL; pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n"); From 60abe78279568a7109db2bcbc71131766a91c2e5 Mon Sep 17 00:00:00 2001 From: Ron Murray Date: Tue, 19 Jan 2010 08:02:48 +0000 Subject: [PATCH 1329/1626] Please add support for Microsoft MN-120 PCMCIA network card Please add support for Microsoft MN-120 PCMCIA network card. It's an old card, I know, but adding support is very easy. You just need to get tulip_core.c to recognise its vendor/device ID. Patch for kernel 2.6.32.4 (and many previous) attached. .....Ron Murray Signed-off-by: Ron Murray Signed-off-by: David S. Miller --- drivers/net/tulip/tulip_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 595777dcadb1..20696b5d60a5 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -249,6 +249,7 @@ static struct pci_device_id tulip_pci_tbl[] = { { 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */ { 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */ + { 0x1414, 0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Microsoft MN-120 */ { 0x1414, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { } /* terminate list */ }; From fa4281bbbcb44d1f8bdac894ad0696535272cc43 Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Thu, 21 Jan 2010 22:51:36 +0000 Subject: [PATCH 1330/1626] be2net: swap only first 2 fields of mcc_wrb Only the first two fields of mcc wrb - embedded, payload_len need to be cpu_to_le32() swapped while issuing a cmd to the hw. The fields tag0, tag1 are opaque and returned back to cpu as is... Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/benet/be_cmds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index 102ade134165..fee6eee7ae5b 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -286,7 +286,7 @@ static void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len, MCC_WRB_SGE_CNT_SHIFT; wrb->payload_length = payload_len; wrb->tag0 = opcode; - be_dws_cpu_to_le(wrb, 20); + be_dws_cpu_to_le(wrb, 8); } /* Don't touch the hdr after it's prepared */ From 33d7959a7a9ef36573bfd0cc85ebef29ed4b846d Mon Sep 17 00:00:00 2001 From: Ken Kawasaki Date: Fri, 22 Jan 2010 11:56:25 +0000 Subject: [PATCH 1331/1626] fmvj18x_cs: add new id (Panasonic lan & modem card) fmvj18x_cs, serial_cs: add new id Panasonic lan & modem card (model name:AL-VML101) Signed-off-by: Ken Kawasaki Signed-off-by: David S. Miller --- drivers/net/pcmcia/fmvj18x_cs.c | 1 + drivers/serial/serial_cs.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 813aca3fc433..7b17404d0858 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -717,6 +717,7 @@ static struct pcmcia_device_id fmvj18x_ids[] = { PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064), PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a), PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a), + PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01), PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05), PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101), PCMCIA_DEVICE_NULL, diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index df854401af2d..95421fa3b304 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -758,6 +758,7 @@ static struct pcmcia_device_id serial_ids[] = { PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01), PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), From 9926146b15fd96d78a4f7c32e7a26d50639369f4 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Fri, 22 Jan 2010 22:56:16 +0000 Subject: [PATCH 1332/1626] e1000/e1000e: don't use small hardware rx buffers When testing the "e1000: enhance frame fragment detection" (and e1000e) patches we found some bugs with reducing the MTU size. The 1024 byte descriptor used with the 1000 mtu test also (re) introduced the (originally) reported bug, and causes us to need the e1000_clean_tx_irq "enhance frame fragment detection" fix. So what has occured here is that 2.6.32 is only vulnerable for mtu < 1500 due to the jumbo specific routines in both e1000 and e1000e. So, 2.6.32 needs the 2kB buffer len fix for those smaller MTUs, but is not vulnerable to the original issue reported. It has been pointed out that this vulnerability needs to be patched in older kernels that don't have the e1000 jumbo routine. Without the jumbo routines, we need the "enhance frame fragment detection" fix the e1000, old e1000e is only vulnerable for < 1500 mtu, and needs a similar fix. We split the patches up to provide easy backport paths. There is only a slight bit of extra code when this fix and the original "enhance frame fragment detection" fixes are applied, so please apply both, even though it is a bit of overkill. Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_main.c | 20 +------------------- drivers/net/e1000e/netdev.c | 20 +------------------- 2 files changed, 2 insertions(+), 38 deletions(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index a53a2017c537..d29bb532eccf 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1698,18 +1698,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) rctl &= ~E1000_RCTL_SZ_4096; rctl |= E1000_RCTL_BSEX; switch (adapter->rx_buffer_len) { - case E1000_RXBUFFER_256: - rctl |= E1000_RCTL_SZ_256; - rctl &= ~E1000_RCTL_BSEX; - break; - case E1000_RXBUFFER_512: - rctl |= E1000_RCTL_SZ_512; - rctl &= ~E1000_RCTL_BSEX; - break; - case E1000_RXBUFFER_1024: - rctl |= E1000_RCTL_SZ_1024; - rctl &= ~E1000_RCTL_BSEX; - break; case E1000_RXBUFFER_2048: default: rctl |= E1000_RCTL_SZ_2048; @@ -3176,13 +3164,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) * however with the new *_jumbo_rx* routines, jumbo receives will use * fragmented skbs */ - if (max_frame <= E1000_RXBUFFER_256) - adapter->rx_buffer_len = E1000_RXBUFFER_256; - else if (max_frame <= E1000_RXBUFFER_512) - adapter->rx_buffer_len = E1000_RXBUFFER_512; - else if (max_frame <= E1000_RXBUFFER_1024) - adapter->rx_buffer_len = E1000_RXBUFFER_1024; - else if (max_frame <= E1000_RXBUFFER_2048) + if (max_frame <= E1000_RXBUFFER_2048) adapter->rx_buffer_len = E1000_RXBUFFER_2048; else #if (PAGE_SIZE >= E1000_RXBUFFER_16384) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 1ea395b6c992..3d887104a0d8 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2350,18 +2350,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) rctl &= ~E1000_RCTL_SZ_4096; rctl |= E1000_RCTL_BSEX; switch (adapter->rx_buffer_len) { - case 256: - rctl |= E1000_RCTL_SZ_256; - rctl &= ~E1000_RCTL_BSEX; - break; - case 512: - rctl |= E1000_RCTL_SZ_512; - rctl &= ~E1000_RCTL_BSEX; - break; - case 1024: - rctl |= E1000_RCTL_SZ_1024; - rctl &= ~E1000_RCTL_BSEX; - break; case 2048: default: rctl |= E1000_RCTL_SZ_2048; @@ -4334,13 +4322,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) * fragmented skbs */ - if (max_frame <= 256) - adapter->rx_buffer_len = 256; - else if (max_frame <= 512) - adapter->rx_buffer_len = 512; - else if (max_frame <= 1024) - adapter->rx_buffer_len = 1024; - else if (max_frame <= 2048) + if (max_frame <= 2048) adapter->rx_buffer_len = 2048; else adapter->rx_buffer_len = 4096; From de4fc07aff770743b2c3e3ee30a23a691450a4f6 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Sat, 23 Jan 2010 01:20:22 -0800 Subject: [PATCH 1333/1626] MAINTAINERS: Add Intel igbvf maintainer Add igbvf to the list of supported Intel drivers and Alex to the list of maintainers. Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- MAINTAINERS | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 4067c2e50d48..03f38c18f323 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2822,10 +2822,11 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/ixp2000/ -INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe) +INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe) M: Jeff Kirsher M: Jesse Brandeburg M: Bruce Allan +M: Alex Duyck M: PJ Waskiewicz M: John Ronciak L: e1000-devel@lists.sourceforge.net @@ -2835,6 +2836,7 @@ F: drivers/net/e100.c F: drivers/net/e1000/ F: drivers/net/e1000e/ F: drivers/net/igb/ +F: drivers/net/igbvf/ F: drivers/net/ixgb/ F: drivers/net/ixgbe/ From 8581145f39c39b00cd1b6a2dcb4ce5bf7d8d6070 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 23 Jan 2010 01:35:00 -0800 Subject: [PATCH 1334/1626] igb/igbvf: cleanup exception handling in tx_map_adv After removing the skb_dma_map/unmap calls the exception handling in igb_tx_map_adv is not correct. The issue is that the count value was not being correctly handled so as a result we were not rewinding the ring as back as we should have been. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_main.c | 2 +- drivers/net/igbvf/netdev.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 933c64ff2465..2ca173453b66 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -3584,6 +3584,7 @@ static inline int igb_tx_map_adv(struct igb_ring *tx_ring, struct sk_buff *skb, for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) { struct skb_frag_struct *frag; + count++; i++; if (i == tx_ring->count) i = 0; @@ -3605,7 +3606,6 @@ static inline int igb_tx_map_adv(struct igb_ring *tx_ring, struct sk_buff *skb, if (pci_dma_mapping_error(pdev, buffer_info->dma)) goto dma_error; - count++; } tx_ring->buffer_info[i].skb = skb; diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index 10e038adba0f..43c8375f1110 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -2126,6 +2126,7 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) { struct skb_frag_struct *frag; + count++; i++; if (i == tx_ring->count) i = 0; @@ -2146,7 +2147,6 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, PCI_DMA_TODEVICE); if (pci_dma_mapping_error(pdev, buffer_info->dma)) goto dma_error; - count++; } tx_ring->buffer_info[i].skb = skb; From 8e1e8a4779cb23c1d9f51e9223795e07ec54d77a Mon Sep 17 00:00:00 2001 From: Sridhar Samudrala Date: Sat, 23 Jan 2010 02:02:21 -0800 Subject: [PATCH 1335/1626] net: Fix IPv6 GSO type checks in Intel ethernet drivers Found this problem when testing IPv6 from a KVM guest to a remote host via e1000e device on the host. The following patch fixes the check for IPv6 GSO packet in Intel ethernet drivers to use skb_is_gso_v6(). SKB_GSO_DODGY is also set when packets are forwarded from a guest. Signed-off-by: Sridhar Samudrala Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 2 +- drivers/net/igb/igb_main.c | 2 +- drivers/net/igbvf/netdev.c | 2 +- drivers/net/ixgbe/ixgbe_main.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 3d887104a0d8..57f149b75fbe 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -3786,7 +3786,7 @@ static int e1000_tso(struct e1000_adapter *adapter, 0, IPPROTO_TCP, 0); cmd_length = E1000_TXD_CMD_IP; ipcse = skb_transport_offset(skb) - 1; - } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) { + } else if (skb_is_gso_v6(skb)) { ipv6_hdr(skb)->payload_len = 0; tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 2ca173453b66..997124d2992a 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -3422,7 +3422,7 @@ static inline int igb_tso_adv(struct igb_ring *tx_ring, iph->daddr, 0, IPPROTO_TCP, 0); - } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) { + } else if (skb_is_gso_v6(skb)) { ipv6_hdr(skb)->payload_len = 0; tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index 43c8375f1110..297a5ddd77f0 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -1963,7 +1963,7 @@ static int igbvf_tso(struct igbvf_adapter *adapter, iph->daddr, 0, IPPROTO_TCP, 0); - } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) { + } else if (skb_is_gso_v6(skb)) { ipv6_hdr(skb)->payload_len = 0; tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 6d61add27a06..b5f64ad67975 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -4928,7 +4928,7 @@ static int ixgbe_tso(struct ixgbe_adapter *adapter, iph->daddr, 0, IPPROTO_TCP, 0); - } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) { + } else if (skb_is_gso_v6(skb)) { ipv6_hdr(skb)->payload_len = 0; tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, From 2ca4231de7f7a5fd7137bac152030ba71f15e8c3 Mon Sep 17 00:00:00 2001 From: Mike McCormack Date: Sat, 23 Jan 2010 02:09:26 -0800 Subject: [PATCH 1336/1626] sky2: Enable/disable WOL per hardware device Y2_HW_WOL_ON/Y2_HW_WOL_OFF should be set and cleared per chip, not per port. On dual port cards, Y2_HW_WOL_ON should be enabled if either sky2 port has WOL enabled. Found while reviewing code for a WOL regression, though this is probably not the cause of the regression. Signed-off-by: Mike McCormack Signed-off-by: David S. Miller --- drivers/net/sky2.c | 29 ++++++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 37f486b65f63..02d0b42e436c 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -3228,6 +3228,27 @@ static inline u8 sky2_wol_supported(const struct sky2_hw *hw) return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0; } +static void sky2_hw_set_wol(struct sky2_hw *hw) +{ + int wol = 0; + int i; + + for (i = 0; i < hw->ports; i++) { + struct net_device *dev = hw->dev[i]; + struct sky2_port *sky2 = netdev_priv(dev); + + if (sky2->wol) + wol = 1; + } + + if (hw->chip_id == CHIP_ID_YUKON_EC_U || + hw->chip_id == CHIP_ID_YUKON_EX || + hw->chip_id == CHIP_ID_YUKON_FE_P) + sky2_write32(hw, B0_CTST, wol ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF); + + device_set_wakeup_enable(&hw->pdev->dev, wol); +} + static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { const struct sky2_port *sky2 = netdev_priv(dev); @@ -3247,13 +3268,7 @@ static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) sky2->wol = wol->wolopts; - if (hw->chip_id == CHIP_ID_YUKON_EC_U || - hw->chip_id == CHIP_ID_YUKON_EX || - hw->chip_id == CHIP_ID_YUKON_FE_P) - sky2_write32(hw, B0_CTST, sky2->wol - ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF); - - device_set_wakeup_enable(&hw->pdev->dev, sky2->wol); + sky2_hw_set_wol(hw); if (!netif_running(dev)) sky2_wol_init(sky2); From b160091802d4a76dd063facb09fcf10bf5d5d747 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Sat, 23 Jan 2010 18:27:47 -0800 Subject: [PATCH 1337/1626] x86: Remove "x86 CPU features in debugfs" (CONFIG_X86_CPU_DEBUG) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CONFIG_X86_CPU_DEBUG, which provides some parsed versions of the x86 CPU configuration via debugfs, has caused boot failures on real hardware. The value of this feature has been marginal at best, as all this information is already available to userspace via generic interfaces. Causes crashes that have not been fixed + minimal utility -> remove. See the referenced LKML thread for more information. Reported-by: Ozan Çağlayan Signed-off-by: H. Peter Anvin LKML-Reference: Cc: Jaswinder Singh Rajput Cc: Linus Torvalds Cc: Rafael J. Wysocki Cc: Yinghai Lu Cc: --- arch/x86/Kconfig | 6 - arch/x86/include/asm/cpu_debug.h | 127 ------ arch/x86/kernel/cpu/Makefile | 2 - arch/x86/kernel/cpu/cpu_debug.c | 688 ------------------------------- 4 files changed, 823 deletions(-) delete mode 100644 arch/x86/include/asm/cpu_debug.h delete mode 100644 arch/x86/kernel/cpu/cpu_debug.c diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cbcbfdee3ee0..eb4092568f9e 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -989,12 +989,6 @@ config X86_CPUID with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to /dev/cpu/31/cpuid. -config X86_CPU_DEBUG - tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support" - ---help--- - If you select this option, this will provide various x86 CPUs - information through debugfs. - choice prompt "High Memory Support" default HIGHMEM4G if !X86_NUMAQ diff --git a/arch/x86/include/asm/cpu_debug.h b/arch/x86/include/asm/cpu_debug.h deleted file mode 100644 index d96c1ee3a95c..000000000000 --- a/arch/x86/include/asm/cpu_debug.h +++ /dev/null @@ -1,127 +0,0 @@ -#ifndef _ASM_X86_CPU_DEBUG_H -#define _ASM_X86_CPU_DEBUG_H - -/* - * CPU x86 architecture debug - * - * Copyright(C) 2009 Jaswinder Singh Rajput - */ - -/* Register flags */ -enum cpu_debug_bit { -/* Model Specific Registers (MSRs) */ - CPU_MC_BIT, /* Machine Check */ - CPU_MONITOR_BIT, /* Monitor */ - CPU_TIME_BIT, /* Time */ - CPU_PMC_BIT, /* Performance Monitor */ - CPU_PLATFORM_BIT, /* Platform */ - CPU_APIC_BIT, /* APIC */ - CPU_POWERON_BIT, /* Power-on */ - CPU_CONTROL_BIT, /* Control */ - CPU_FEATURES_BIT, /* Features control */ - CPU_LBRANCH_BIT, /* Last Branch */ - CPU_BIOS_BIT, /* BIOS */ - CPU_FREQ_BIT, /* Frequency */ - CPU_MTTR_BIT, /* MTRR */ - CPU_PERF_BIT, /* Performance */ - CPU_CACHE_BIT, /* Cache */ - CPU_SYSENTER_BIT, /* Sysenter */ - CPU_THERM_BIT, /* Thermal */ - CPU_MISC_BIT, /* Miscellaneous */ - CPU_DEBUG_BIT, /* Debug */ - CPU_PAT_BIT, /* PAT */ - CPU_VMX_BIT, /* VMX */ - CPU_CALL_BIT, /* System Call */ - CPU_BASE_BIT, /* BASE Address */ - CPU_VER_BIT, /* Version ID */ - CPU_CONF_BIT, /* Configuration */ - CPU_SMM_BIT, /* System mgmt mode */ - CPU_SVM_BIT, /*Secure Virtual Machine*/ - CPU_OSVM_BIT, /* OS-Visible Workaround*/ -/* Standard Registers */ - CPU_TSS_BIT, /* Task Stack Segment */ - CPU_CR_BIT, /* Control Registers */ - CPU_DT_BIT, /* Descriptor Table */ -/* End of Registers flags */ - CPU_REG_ALL_BIT, /* Select all Registers */ -}; - -#define CPU_REG_ALL (~0) /* Select all Registers */ - -#define CPU_MC (1 << CPU_MC_BIT) -#define CPU_MONITOR (1 << CPU_MONITOR_BIT) -#define CPU_TIME (1 << CPU_TIME_BIT) -#define CPU_PMC (1 << CPU_PMC_BIT) -#define CPU_PLATFORM (1 << CPU_PLATFORM_BIT) -#define CPU_APIC (1 << CPU_APIC_BIT) -#define CPU_POWERON (1 << CPU_POWERON_BIT) -#define CPU_CONTROL (1 << CPU_CONTROL_BIT) -#define CPU_FEATURES (1 << CPU_FEATURES_BIT) -#define CPU_LBRANCH (1 << CPU_LBRANCH_BIT) -#define CPU_BIOS (1 << CPU_BIOS_BIT) -#define CPU_FREQ (1 << CPU_FREQ_BIT) -#define CPU_MTRR (1 << CPU_MTTR_BIT) -#define CPU_PERF (1 << CPU_PERF_BIT) -#define CPU_CACHE (1 << CPU_CACHE_BIT) -#define CPU_SYSENTER (1 << CPU_SYSENTER_BIT) -#define CPU_THERM (1 << CPU_THERM_BIT) -#define CPU_MISC (1 << CPU_MISC_BIT) -#define CPU_DEBUG (1 << CPU_DEBUG_BIT) -#define CPU_PAT (1 << CPU_PAT_BIT) -#define CPU_VMX (1 << CPU_VMX_BIT) -#define CPU_CALL (1 << CPU_CALL_BIT) -#define CPU_BASE (1 << CPU_BASE_BIT) -#define CPU_VER (1 << CPU_VER_BIT) -#define CPU_CONF (1 << CPU_CONF_BIT) -#define CPU_SMM (1 << CPU_SMM_BIT) -#define CPU_SVM (1 << CPU_SVM_BIT) -#define CPU_OSVM (1 << CPU_OSVM_BIT) -#define CPU_TSS (1 << CPU_TSS_BIT) -#define CPU_CR (1 << CPU_CR_BIT) -#define CPU_DT (1 << CPU_DT_BIT) - -/* Register file flags */ -enum cpu_file_bit { - CPU_INDEX_BIT, /* index */ - CPU_VALUE_BIT, /* value */ -}; - -#define CPU_FILE_VALUE (1 << CPU_VALUE_BIT) - -#define MAX_CPU_FILES 512 - -struct cpu_private { - unsigned cpu; - unsigned type; - unsigned reg; - unsigned file; -}; - -struct cpu_debug_base { - char *name; /* Register name */ - unsigned flag; /* Register flag */ - unsigned write; /* Register write flag */ -}; - -/* - * Currently it looks similar to cpu_debug_base but once we add more files - * cpu_file_base will go in different direction - */ -struct cpu_file_base { - char *name; /* Register file name */ - unsigned flag; /* Register file flag */ - unsigned write; /* Register write flag */ -}; - -struct cpu_cpuX_base { - struct dentry *dentry; /* Register dentry */ - int init; /* Register index file */ -}; - -struct cpu_debug_range { - unsigned min; /* Register range min */ - unsigned max; /* Register range max */ - unsigned flag; /* Supported flags */ -}; - -#endif /* _ASM_X86_CPU_DEBUG_H */ diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 1d2cb383410e..c202b62f3671 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -19,8 +19,6 @@ obj-y += vmware.o hypervisor.o sched.o obj-$(CONFIG_X86_32) += bugs.o cmpxchg.o obj-$(CONFIG_X86_64) += bugs_64.o -obj-$(CONFIG_X86_CPU_DEBUG) += cpu_debug.o - obj-$(CONFIG_CPU_SUP_INTEL) += intel.o obj-$(CONFIG_CPU_SUP_AMD) += amd.o obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix.o diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c deleted file mode 100644 index b368cd862997..000000000000 --- a/arch/x86/kernel/cpu/cpu_debug.c +++ /dev/null @@ -1,688 +0,0 @@ -/* - * CPU x86 architecture debug code - * - * Copyright(C) 2009 Jaswinder Singh Rajput - * - * For licencing details see kernel-base/COPYING - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -static DEFINE_PER_CPU(struct cpu_cpuX_base [CPU_REG_ALL_BIT], cpud_arr); -static DEFINE_PER_CPU(struct cpu_private * [MAX_CPU_FILES], cpud_priv_arr); -static DEFINE_PER_CPU(int, cpud_priv_count); - -static DEFINE_MUTEX(cpu_debug_lock); - -static struct dentry *cpu_debugfs_dir; - -static struct cpu_debug_base cpu_base[] = { - { "mc", CPU_MC, 0 }, - { "monitor", CPU_MONITOR, 0 }, - { "time", CPU_TIME, 0 }, - { "pmc", CPU_PMC, 1 }, - { "platform", CPU_PLATFORM, 0 }, - { "apic", CPU_APIC, 0 }, - { "poweron", CPU_POWERON, 0 }, - { "control", CPU_CONTROL, 0 }, - { "features", CPU_FEATURES, 0 }, - { "lastbranch", CPU_LBRANCH, 0 }, - { "bios", CPU_BIOS, 0 }, - { "freq", CPU_FREQ, 0 }, - { "mtrr", CPU_MTRR, 0 }, - { "perf", CPU_PERF, 0 }, - { "cache", CPU_CACHE, 0 }, - { "sysenter", CPU_SYSENTER, 0 }, - { "therm", CPU_THERM, 0 }, - { "misc", CPU_MISC, 0 }, - { "debug", CPU_DEBUG, 0 }, - { "pat", CPU_PAT, 0 }, - { "vmx", CPU_VMX, 0 }, - { "call", CPU_CALL, 0 }, - { "base", CPU_BASE, 0 }, - { "ver", CPU_VER, 0 }, - { "conf", CPU_CONF, 0 }, - { "smm", CPU_SMM, 0 }, - { "svm", CPU_SVM, 0 }, - { "osvm", CPU_OSVM, 0 }, - { "tss", CPU_TSS, 0 }, - { "cr", CPU_CR, 0 }, - { "dt", CPU_DT, 0 }, - { "registers", CPU_REG_ALL, 0 }, -}; - -static struct cpu_file_base cpu_file[] = { - { "index", CPU_REG_ALL, 0 }, - { "value", CPU_REG_ALL, 1 }, -}; - -/* CPU Registers Range */ -static struct cpu_debug_range cpu_reg_range[] = { - { 0x00000000, 0x00000001, CPU_MC, }, - { 0x00000006, 0x00000007, CPU_MONITOR, }, - { 0x00000010, 0x00000010, CPU_TIME, }, - { 0x00000011, 0x00000013, CPU_PMC, }, - { 0x00000017, 0x00000017, CPU_PLATFORM, }, - { 0x0000001B, 0x0000001B, CPU_APIC, }, - { 0x0000002A, 0x0000002B, CPU_POWERON, }, - { 0x0000002C, 0x0000002C, CPU_FREQ, }, - { 0x0000003A, 0x0000003A, CPU_CONTROL, }, - { 0x00000040, 0x00000047, CPU_LBRANCH, }, - { 0x00000060, 0x00000067, CPU_LBRANCH, }, - { 0x00000079, 0x00000079, CPU_BIOS, }, - { 0x00000088, 0x0000008A, CPU_CACHE, }, - { 0x0000008B, 0x0000008B, CPU_BIOS, }, - { 0x0000009B, 0x0000009B, CPU_MONITOR, }, - { 0x000000C1, 0x000000C4, CPU_PMC, }, - { 0x000000CD, 0x000000CD, CPU_FREQ, }, - { 0x000000E7, 0x000000E8, CPU_PERF, }, - { 0x000000FE, 0x000000FE, CPU_MTRR, }, - - { 0x00000116, 0x0000011E, CPU_CACHE, }, - { 0x00000174, 0x00000176, CPU_SYSENTER, }, - { 0x00000179, 0x0000017B, CPU_MC, }, - { 0x00000186, 0x00000189, CPU_PMC, }, - { 0x00000198, 0x00000199, CPU_PERF, }, - { 0x0000019A, 0x0000019A, CPU_TIME, }, - { 0x0000019B, 0x0000019D, CPU_THERM, }, - { 0x000001A0, 0x000001A0, CPU_MISC, }, - { 0x000001C9, 0x000001C9, CPU_LBRANCH, }, - { 0x000001D7, 0x000001D8, CPU_LBRANCH, }, - { 0x000001D9, 0x000001D9, CPU_DEBUG, }, - { 0x000001DA, 0x000001E0, CPU_LBRANCH, }, - - { 0x00000200, 0x0000020F, CPU_MTRR, }, - { 0x00000250, 0x00000250, CPU_MTRR, }, - { 0x00000258, 0x00000259, CPU_MTRR, }, - { 0x00000268, 0x0000026F, CPU_MTRR, }, - { 0x00000277, 0x00000277, CPU_PAT, }, - { 0x000002FF, 0x000002FF, CPU_MTRR, }, - - { 0x00000300, 0x00000311, CPU_PMC, }, - { 0x00000345, 0x00000345, CPU_PMC, }, - { 0x00000360, 0x00000371, CPU_PMC, }, - { 0x0000038D, 0x00000390, CPU_PMC, }, - { 0x000003A0, 0x000003BE, CPU_PMC, }, - { 0x000003C0, 0x000003CD, CPU_PMC, }, - { 0x000003E0, 0x000003E1, CPU_PMC, }, - { 0x000003F0, 0x000003F2, CPU_PMC, }, - - { 0x00000400, 0x00000417, CPU_MC, }, - { 0x00000480, 0x0000048B, CPU_VMX, }, - - { 0x00000600, 0x00000600, CPU_DEBUG, }, - { 0x00000680, 0x0000068F, CPU_LBRANCH, }, - { 0x000006C0, 0x000006CF, CPU_LBRANCH, }, - - { 0x000107CC, 0x000107D3, CPU_PMC, }, - - { 0xC0000080, 0xC0000080, CPU_FEATURES, }, - { 0xC0000081, 0xC0000084, CPU_CALL, }, - { 0xC0000100, 0xC0000102, CPU_BASE, }, - { 0xC0000103, 0xC0000103, CPU_TIME, }, - - { 0xC0010000, 0xC0010007, CPU_PMC, }, - { 0xC0010010, 0xC0010010, CPU_CONF, }, - { 0xC0010015, 0xC0010015, CPU_CONF, }, - { 0xC0010016, 0xC001001A, CPU_MTRR, }, - { 0xC001001D, 0xC001001D, CPU_MTRR, }, - { 0xC001001F, 0xC001001F, CPU_CONF, }, - { 0xC0010030, 0xC0010035, CPU_BIOS, }, - { 0xC0010044, 0xC0010048, CPU_MC, }, - { 0xC0010050, 0xC0010056, CPU_SMM, }, - { 0xC0010058, 0xC0010058, CPU_CONF, }, - { 0xC0010060, 0xC0010060, CPU_CACHE, }, - { 0xC0010061, 0xC0010068, CPU_SMM, }, - { 0xC0010069, 0xC001006B, CPU_SMM, }, - { 0xC0010070, 0xC0010071, CPU_SMM, }, - { 0xC0010111, 0xC0010113, CPU_SMM, }, - { 0xC0010114, 0xC0010118, CPU_SVM, }, - { 0xC0010140, 0xC0010141, CPU_OSVM, }, - { 0xC0011022, 0xC0011023, CPU_CONF, }, -}; - -static int is_typeflag_valid(unsigned cpu, unsigned flag) -{ - int i; - - /* Standard Registers should be always valid */ - if (flag >= CPU_TSS) - return 1; - - for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) { - if (cpu_reg_range[i].flag == flag) - return 1; - } - - /* Invalid */ - return 0; -} - -static unsigned get_cpu_range(unsigned cpu, unsigned *min, unsigned *max, - int index, unsigned flag) -{ - if (cpu_reg_range[index].flag == flag) { - *min = cpu_reg_range[index].min; - *max = cpu_reg_range[index].max; - } else - *max = 0; - - return *max; -} - -/* This function can also be called with seq = NULL for printk */ -static void print_cpu_data(struct seq_file *seq, unsigned type, - u32 low, u32 high) -{ - struct cpu_private *priv; - u64 val = high; - - if (seq) { - priv = seq->private; - if (priv->file) { - val = (val << 32) | low; - seq_printf(seq, "0x%llx\n", val); - } else - seq_printf(seq, " %08x: %08x_%08x\n", - type, high, low); - } else - printk(KERN_INFO " %08x: %08x_%08x\n", type, high, low); -} - -/* This function can also be called with seq = NULL for printk */ -static void print_msr(struct seq_file *seq, unsigned cpu, unsigned flag) -{ - unsigned msr, msr_min, msr_max; - struct cpu_private *priv; - u32 low, high; - int i; - - if (seq) { - priv = seq->private; - if (priv->file) { - if (!rdmsr_safe_on_cpu(priv->cpu, priv->reg, - &low, &high)) - print_cpu_data(seq, priv->reg, low, high); - return; - } - } - - for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) { - if (!get_cpu_range(cpu, &msr_min, &msr_max, i, flag)) - continue; - - for (msr = msr_min; msr <= msr_max; msr++) { - if (rdmsr_safe_on_cpu(cpu, msr, &low, &high)) - continue; - print_cpu_data(seq, msr, low, high); - } - } -} - -static void print_tss(void *arg) -{ - struct pt_regs *regs = task_pt_regs(current); - struct seq_file *seq = arg; - unsigned int seg; - - seq_printf(seq, " RAX\t: %016lx\n", regs->ax); - seq_printf(seq, " RBX\t: %016lx\n", regs->bx); - seq_printf(seq, " RCX\t: %016lx\n", regs->cx); - seq_printf(seq, " RDX\t: %016lx\n", regs->dx); - - seq_printf(seq, " RSI\t: %016lx\n", regs->si); - seq_printf(seq, " RDI\t: %016lx\n", regs->di); - seq_printf(seq, " RBP\t: %016lx\n", regs->bp); - seq_printf(seq, " ESP\t: %016lx\n", regs->sp); - -#ifdef CONFIG_X86_64 - seq_printf(seq, " R08\t: %016lx\n", regs->r8); - seq_printf(seq, " R09\t: %016lx\n", regs->r9); - seq_printf(seq, " R10\t: %016lx\n", regs->r10); - seq_printf(seq, " R11\t: %016lx\n", regs->r11); - seq_printf(seq, " R12\t: %016lx\n", regs->r12); - seq_printf(seq, " R13\t: %016lx\n", regs->r13); - seq_printf(seq, " R14\t: %016lx\n", regs->r14); - seq_printf(seq, " R15\t: %016lx\n", regs->r15); -#endif - - asm("movl %%cs,%0" : "=r" (seg)); - seq_printf(seq, " CS\t: %04x\n", seg); - asm("movl %%ds,%0" : "=r" (seg)); - seq_printf(seq, " DS\t: %04x\n", seg); - seq_printf(seq, " SS\t: %04lx\n", regs->ss & 0xffff); - asm("movl %%es,%0" : "=r" (seg)); - seq_printf(seq, " ES\t: %04x\n", seg); - asm("movl %%fs,%0" : "=r" (seg)); - seq_printf(seq, " FS\t: %04x\n", seg); - asm("movl %%gs,%0" : "=r" (seg)); - seq_printf(seq, " GS\t: %04x\n", seg); - - seq_printf(seq, " EFLAGS\t: %016lx\n", regs->flags); - - seq_printf(seq, " EIP\t: %016lx\n", regs->ip); -} - -static void print_cr(void *arg) -{ - struct seq_file *seq = arg; - - seq_printf(seq, " cr0\t: %016lx\n", read_cr0()); - seq_printf(seq, " cr2\t: %016lx\n", read_cr2()); - seq_printf(seq, " cr3\t: %016lx\n", read_cr3()); - seq_printf(seq, " cr4\t: %016lx\n", read_cr4_safe()); -#ifdef CONFIG_X86_64 - seq_printf(seq, " cr8\t: %016lx\n", read_cr8()); -#endif -} - -static void print_desc_ptr(char *str, struct seq_file *seq, struct desc_ptr dt) -{ - seq_printf(seq, " %s\t: %016llx\n", str, (u64)(dt.address | dt.size)); -} - -static void print_dt(void *seq) -{ - struct desc_ptr dt; - unsigned long ldt; - - /* IDT */ - store_idt((struct desc_ptr *)&dt); - print_desc_ptr("IDT", seq, dt); - - /* GDT */ - store_gdt((struct desc_ptr *)&dt); - print_desc_ptr("GDT", seq, dt); - - /* LDT */ - store_ldt(ldt); - seq_printf(seq, " LDT\t: %016lx\n", ldt); - - /* TR */ - store_tr(ldt); - seq_printf(seq, " TR\t: %016lx\n", ldt); -} - -static void print_dr(void *arg) -{ - struct seq_file *seq = arg; - unsigned long dr; - int i; - - for (i = 0; i < 8; i++) { - /* Ignore db4, db5 */ - if ((i == 4) || (i == 5)) - continue; - get_debugreg(dr, i); - seq_printf(seq, " dr%d\t: %016lx\n", i, dr); - } - - seq_printf(seq, "\n MSR\t:\n"); -} - -static void print_apic(void *arg) -{ - struct seq_file *seq = arg; - -#ifdef CONFIG_X86_LOCAL_APIC - seq_printf(seq, " LAPIC\t:\n"); - seq_printf(seq, " ID\t\t: %08x\n", apic_read(APIC_ID) >> 24); - seq_printf(seq, " LVR\t\t: %08x\n", apic_read(APIC_LVR)); - seq_printf(seq, " TASKPRI\t: %08x\n", apic_read(APIC_TASKPRI)); - seq_printf(seq, " ARBPRI\t\t: %08x\n", apic_read(APIC_ARBPRI)); - seq_printf(seq, " PROCPRI\t: %08x\n", apic_read(APIC_PROCPRI)); - seq_printf(seq, " LDR\t\t: %08x\n", apic_read(APIC_LDR)); - seq_printf(seq, " DFR\t\t: %08x\n", apic_read(APIC_DFR)); - seq_printf(seq, " SPIV\t\t: %08x\n", apic_read(APIC_SPIV)); - seq_printf(seq, " ISR\t\t: %08x\n", apic_read(APIC_ISR)); - seq_printf(seq, " ESR\t\t: %08x\n", apic_read(APIC_ESR)); - seq_printf(seq, " ICR\t\t: %08x\n", apic_read(APIC_ICR)); - seq_printf(seq, " ICR2\t\t: %08x\n", apic_read(APIC_ICR2)); - seq_printf(seq, " LVTT\t\t: %08x\n", apic_read(APIC_LVTT)); - seq_printf(seq, " LVTTHMR\t: %08x\n", apic_read(APIC_LVTTHMR)); - seq_printf(seq, " LVTPC\t\t: %08x\n", apic_read(APIC_LVTPC)); - seq_printf(seq, " LVT0\t\t: %08x\n", apic_read(APIC_LVT0)); - seq_printf(seq, " LVT1\t\t: %08x\n", apic_read(APIC_LVT1)); - seq_printf(seq, " LVTERR\t\t: %08x\n", apic_read(APIC_LVTERR)); - seq_printf(seq, " TMICT\t\t: %08x\n", apic_read(APIC_TMICT)); - seq_printf(seq, " TMCCT\t\t: %08x\n", apic_read(APIC_TMCCT)); - seq_printf(seq, " TDCR\t\t: %08x\n", apic_read(APIC_TDCR)); - if (boot_cpu_has(X86_FEATURE_EXTAPIC)) { - unsigned int i, v, maxeilvt; - - v = apic_read(APIC_EFEAT); - maxeilvt = (v >> 16) & 0xff; - seq_printf(seq, " EFEAT\t\t: %08x\n", v); - seq_printf(seq, " ECTRL\t\t: %08x\n", apic_read(APIC_ECTRL)); - - for (i = 0; i < maxeilvt; i++) { - v = apic_read(APIC_EILVTn(i)); - seq_printf(seq, " EILVT%d\t\t: %08x\n", i, v); - } - } -#endif /* CONFIG_X86_LOCAL_APIC */ - seq_printf(seq, "\n MSR\t:\n"); -} - -static int cpu_seq_show(struct seq_file *seq, void *v) -{ - struct cpu_private *priv = seq->private; - - if (priv == NULL) - return -EINVAL; - - switch (cpu_base[priv->type].flag) { - case CPU_TSS: - smp_call_function_single(priv->cpu, print_tss, seq, 1); - break; - case CPU_CR: - smp_call_function_single(priv->cpu, print_cr, seq, 1); - break; - case CPU_DT: - smp_call_function_single(priv->cpu, print_dt, seq, 1); - break; - case CPU_DEBUG: - if (priv->file == CPU_INDEX_BIT) - smp_call_function_single(priv->cpu, print_dr, seq, 1); - print_msr(seq, priv->cpu, cpu_base[priv->type].flag); - break; - case CPU_APIC: - if (priv->file == CPU_INDEX_BIT) - smp_call_function_single(priv->cpu, print_apic, seq, 1); - print_msr(seq, priv->cpu, cpu_base[priv->type].flag); - break; - - default: - print_msr(seq, priv->cpu, cpu_base[priv->type].flag); - break; - } - seq_printf(seq, "\n"); - - return 0; -} - -static void *cpu_seq_start(struct seq_file *seq, loff_t *pos) -{ - if (*pos == 0) /* One time is enough ;-) */ - return seq; - - return NULL; -} - -static void *cpu_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - (*pos)++; - - return cpu_seq_start(seq, pos); -} - -static void cpu_seq_stop(struct seq_file *seq, void *v) -{ -} - -static const struct seq_operations cpu_seq_ops = { - .start = cpu_seq_start, - .next = cpu_seq_next, - .stop = cpu_seq_stop, - .show = cpu_seq_show, -}; - -static int cpu_seq_open(struct inode *inode, struct file *file) -{ - struct cpu_private *priv = inode->i_private; - struct seq_file *seq; - int err; - - err = seq_open(file, &cpu_seq_ops); - if (!err) { - seq = file->private_data; - seq->private = priv; - } - - return err; -} - -static int write_msr(struct cpu_private *priv, u64 val) -{ - u32 low, high; - - high = (val >> 32) & 0xffffffff; - low = val & 0xffffffff; - - if (!wrmsr_safe_on_cpu(priv->cpu, priv->reg, low, high)) - return 0; - - return -EPERM; -} - -static int write_cpu_register(struct cpu_private *priv, const char *buf) -{ - int ret = -EPERM; - u64 val; - - ret = strict_strtoull(buf, 0, &val); - if (ret < 0) - return ret; - - /* Supporting only MSRs */ - if (priv->type < CPU_TSS_BIT) - return write_msr(priv, val); - - return ret; -} - -static ssize_t cpu_write(struct file *file, const char __user *ubuf, - size_t count, loff_t *off) -{ - struct seq_file *seq = file->private_data; - struct cpu_private *priv = seq->private; - char buf[19]; - - if ((priv == NULL) || (count >= sizeof(buf))) - return -EINVAL; - - if (copy_from_user(&buf, ubuf, count)) - return -EFAULT; - - buf[count] = 0; - - if ((cpu_base[priv->type].write) && (cpu_file[priv->file].write)) - if (!write_cpu_register(priv, buf)) - return count; - - return -EACCES; -} - -static const struct file_operations cpu_fops = { - .owner = THIS_MODULE, - .open = cpu_seq_open, - .read = seq_read, - .write = cpu_write, - .llseek = seq_lseek, - .release = seq_release, -}; - -static int cpu_create_file(unsigned cpu, unsigned type, unsigned reg, - unsigned file, struct dentry *dentry) -{ - struct cpu_private *priv = NULL; - - /* Already intialized */ - if (file == CPU_INDEX_BIT) - if (per_cpu(cpud_arr[type].init, cpu)) - return 0; - - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (priv == NULL) - return -ENOMEM; - - priv->cpu = cpu; - priv->type = type; - priv->reg = reg; - priv->file = file; - mutex_lock(&cpu_debug_lock); - per_cpu(cpud_priv_arr[type], cpu) = priv; - per_cpu(cpud_priv_count, cpu)++; - mutex_unlock(&cpu_debug_lock); - - if (file) - debugfs_create_file(cpu_file[file].name, S_IRUGO, - dentry, (void *)priv, &cpu_fops); - else { - debugfs_create_file(cpu_base[type].name, S_IRUGO, - per_cpu(cpud_arr[type].dentry, cpu), - (void *)priv, &cpu_fops); - mutex_lock(&cpu_debug_lock); - per_cpu(cpud_arr[type].init, cpu) = 1; - mutex_unlock(&cpu_debug_lock); - } - - return 0; -} - -static int cpu_init_regfiles(unsigned cpu, unsigned int type, unsigned reg, - struct dentry *dentry) -{ - unsigned file; - int err = 0; - - for (file = 0; file < ARRAY_SIZE(cpu_file); file++) { - err = cpu_create_file(cpu, type, reg, file, dentry); - if (err) - return err; - } - - return err; -} - -static int cpu_init_msr(unsigned cpu, unsigned type, struct dentry *dentry) -{ - struct dentry *cpu_dentry = NULL; - unsigned reg, reg_min, reg_max; - int i, err = 0; - char reg_dir[12]; - u32 low, high; - - for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) { - if (!get_cpu_range(cpu, ®_min, ®_max, i, - cpu_base[type].flag)) - continue; - - for (reg = reg_min; reg <= reg_max; reg++) { - if (rdmsr_safe_on_cpu(cpu, reg, &low, &high)) - continue; - - sprintf(reg_dir, "0x%x", reg); - cpu_dentry = debugfs_create_dir(reg_dir, dentry); - err = cpu_init_regfiles(cpu, type, reg, cpu_dentry); - if (err) - return err; - } - } - - return err; -} - -static int cpu_init_allreg(unsigned cpu, struct dentry *dentry) -{ - struct dentry *cpu_dentry = NULL; - unsigned type; - int err = 0; - - for (type = 0; type < ARRAY_SIZE(cpu_base) - 1; type++) { - if (!is_typeflag_valid(cpu, cpu_base[type].flag)) - continue; - cpu_dentry = debugfs_create_dir(cpu_base[type].name, dentry); - per_cpu(cpud_arr[type].dentry, cpu) = cpu_dentry; - - if (type < CPU_TSS_BIT) - err = cpu_init_msr(cpu, type, cpu_dentry); - else - err = cpu_create_file(cpu, type, 0, CPU_INDEX_BIT, - cpu_dentry); - if (err) - return err; - } - - return err; -} - -static int cpu_init_cpu(void) -{ - struct dentry *cpu_dentry = NULL; - struct cpuinfo_x86 *cpui; - char cpu_dir[12]; - unsigned cpu; - int err = 0; - - for (cpu = 0; cpu < nr_cpu_ids; cpu++) { - cpui = &cpu_data(cpu); - if (!cpu_has(cpui, X86_FEATURE_MSR)) - continue; - - sprintf(cpu_dir, "cpu%d", cpu); - cpu_dentry = debugfs_create_dir(cpu_dir, cpu_debugfs_dir); - err = cpu_init_allreg(cpu, cpu_dentry); - - pr_info("cpu%d(%d) debug files %d\n", - cpu, nr_cpu_ids, per_cpu(cpud_priv_count, cpu)); - if (per_cpu(cpud_priv_count, cpu) > MAX_CPU_FILES) { - pr_err("Register files count %d exceeds limit %d\n", - per_cpu(cpud_priv_count, cpu), MAX_CPU_FILES); - per_cpu(cpud_priv_count, cpu) = MAX_CPU_FILES; - err = -ENFILE; - } - if (err) - return err; - } - - return err; -} - -static int __init cpu_debug_init(void) -{ - cpu_debugfs_dir = debugfs_create_dir("cpu", arch_debugfs_dir); - - return cpu_init_cpu(); -} - -static void __exit cpu_debug_exit(void) -{ - int i, cpu; - - if (cpu_debugfs_dir) - debugfs_remove_recursive(cpu_debugfs_dir); - - for (cpu = 0; cpu < nr_cpu_ids; cpu++) - for (i = 0; i < per_cpu(cpud_priv_count, cpu); i++) - kfree(per_cpu(cpud_priv_arr[i], cpu)); -} - -module_init(cpu_debug_init); -module_exit(cpu_debug_exit); - -MODULE_AUTHOR("Jaswinder Singh Rajput"); -MODULE_DESCRIPTION("CPU Debug module"); -MODULE_LICENSE("GPL"); From e071041be037eca208b62b84469a06bdfc692bea Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 23 Jan 2010 13:37:10 +0000 Subject: [PATCH 1338/1626] netns xfrm: fix "ip xfrm state|policy count" misreport "ip xfrm state|policy count" report SA/SP count from init_net, not from netns of caller process. Signed-off-by: Alexey Dobriyan Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/net/xfrm.h | 4 ++-- net/xfrm/xfrm_policy.c | 16 ++++++++-------- net/xfrm/xfrm_state.c | 6 +++--- net/xfrm/xfrm_user.c | 14 ++++++++------ 4 files changed, 21 insertions(+), 19 deletions(-) diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 6d85861ab990..60c27706e7b9 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1367,8 +1367,8 @@ struct xfrmk_spdinfo { extern struct xfrm_state *xfrm_find_acq_byseq(struct net *net, u32 seq); extern int xfrm_state_delete(struct xfrm_state *x); extern int xfrm_state_flush(struct net *net, u8 proto, struct xfrm_audit *audit_info); -extern void xfrm_sad_getinfo(struct xfrmk_sadinfo *si); -extern void xfrm_spd_getinfo(struct xfrmk_spdinfo *si); +extern void xfrm_sad_getinfo(struct net *net, struct xfrmk_sadinfo *si); +extern void xfrm_spd_getinfo(struct net *net, struct xfrmk_spdinfo *si); extern int xfrm_replay_check(struct xfrm_state *x, struct sk_buff *skb, __be32 seq); extern void xfrm_replay_advance(struct xfrm_state *x, __be32 seq); diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 4725a549ad4d..d2c8cb57ee4c 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -469,16 +469,16 @@ static inline int xfrm_byidx_should_resize(struct net *net, int total) return 0; } -void xfrm_spd_getinfo(struct xfrmk_spdinfo *si) +void xfrm_spd_getinfo(struct net *net, struct xfrmk_spdinfo *si) { read_lock_bh(&xfrm_policy_lock); - si->incnt = init_net.xfrm.policy_count[XFRM_POLICY_IN]; - si->outcnt = init_net.xfrm.policy_count[XFRM_POLICY_OUT]; - si->fwdcnt = init_net.xfrm.policy_count[XFRM_POLICY_FWD]; - si->inscnt = init_net.xfrm.policy_count[XFRM_POLICY_IN+XFRM_POLICY_MAX]; - si->outscnt = init_net.xfrm.policy_count[XFRM_POLICY_OUT+XFRM_POLICY_MAX]; - si->fwdscnt = init_net.xfrm.policy_count[XFRM_POLICY_FWD+XFRM_POLICY_MAX]; - si->spdhcnt = init_net.xfrm.policy_idx_hmask; + si->incnt = net->xfrm.policy_count[XFRM_POLICY_IN]; + si->outcnt = net->xfrm.policy_count[XFRM_POLICY_OUT]; + si->fwdcnt = net->xfrm.policy_count[XFRM_POLICY_FWD]; + si->inscnt = net->xfrm.policy_count[XFRM_POLICY_IN+XFRM_POLICY_MAX]; + si->outscnt = net->xfrm.policy_count[XFRM_POLICY_OUT+XFRM_POLICY_MAX]; + si->fwdscnt = net->xfrm.policy_count[XFRM_POLICY_FWD+XFRM_POLICY_MAX]; + si->spdhcnt = net->xfrm.policy_idx_hmask; si->spdhmcnt = xfrm_policy_hashmax; read_unlock_bh(&xfrm_policy_lock); } diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index d847f1a52b44..b36cc344474b 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -641,11 +641,11 @@ out: } EXPORT_SYMBOL(xfrm_state_flush); -void xfrm_sad_getinfo(struct xfrmk_sadinfo *si) +void xfrm_sad_getinfo(struct net *net, struct xfrmk_sadinfo *si) { spin_lock_bh(&xfrm_state_lock); - si->sadcnt = init_net.xfrm.state_num; - si->sadhcnt = init_net.xfrm.state_hmask; + si->sadcnt = net->xfrm.state_num; + si->sadhcnt = net->xfrm.state_hmask; si->sadhmcnt = xfrm_state_hashmax; spin_unlock_bh(&xfrm_state_lock); } diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 1ada6186933c..d5a712976004 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -781,7 +781,8 @@ static inline size_t xfrm_spdinfo_msgsize(void) + nla_total_size(sizeof(struct xfrmu_spdhinfo)); } -static int build_spdinfo(struct sk_buff *skb, u32 pid, u32 seq, u32 flags) +static int build_spdinfo(struct sk_buff *skb, struct net *net, + u32 pid, u32 seq, u32 flags) { struct xfrmk_spdinfo si; struct xfrmu_spdinfo spc; @@ -795,7 +796,7 @@ static int build_spdinfo(struct sk_buff *skb, u32 pid, u32 seq, u32 flags) f = nlmsg_data(nlh); *f = flags; - xfrm_spd_getinfo(&si); + xfrm_spd_getinfo(net, &si); spc.incnt = si.incnt; spc.outcnt = si.outcnt; spc.fwdcnt = si.fwdcnt; @@ -828,7 +829,7 @@ static int xfrm_get_spdinfo(struct sk_buff *skb, struct nlmsghdr *nlh, if (r_skb == NULL) return -ENOMEM; - if (build_spdinfo(r_skb, spid, seq, *flags) < 0) + if (build_spdinfo(r_skb, net, spid, seq, *flags) < 0) BUG(); return nlmsg_unicast(net->xfrm.nlsk, r_skb, spid); @@ -841,7 +842,8 @@ static inline size_t xfrm_sadinfo_msgsize(void) + nla_total_size(4); /* XFRMA_SAD_CNT */ } -static int build_sadinfo(struct sk_buff *skb, u32 pid, u32 seq, u32 flags) +static int build_sadinfo(struct sk_buff *skb, struct net *net, + u32 pid, u32 seq, u32 flags) { struct xfrmk_sadinfo si; struct xfrmu_sadhinfo sh; @@ -854,7 +856,7 @@ static int build_sadinfo(struct sk_buff *skb, u32 pid, u32 seq, u32 flags) f = nlmsg_data(nlh); *f = flags; - xfrm_sad_getinfo(&si); + xfrm_sad_getinfo(net, &si); sh.sadhmcnt = si.sadhmcnt; sh.sadhcnt = si.sadhcnt; @@ -882,7 +884,7 @@ static int xfrm_get_sadinfo(struct sk_buff *skb, struct nlmsghdr *nlh, if (r_skb == NULL) return -ENOMEM; - if (build_sadinfo(r_skb, spid, seq, *flags) < 0) + if (build_sadinfo(r_skb, net, spid, seq, *flags) < 0) BUG(); return nlmsg_unicast(net->xfrm.nlsk, r_skb, spid); From a348c84d953f61c776e53cde0a63a4e407a23c18 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 21 Jan 2010 16:50:30 -0500 Subject: [PATCH 1339/1626] drm/radeon/kms/atom: fix crtc lock ordering This makes crtc_prepare and crtc_commit match. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index e098bd0cbd26..7af5c1f7b6de 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -782,8 +782,8 @@ static bool atombios_crtc_mode_fixup(struct drm_crtc *crtc, static void atombios_crtc_prepare(struct drm_crtc *crtc) { - atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); atombios_lock_crtc(crtc, 1); + atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); } static void atombios_crtc_commit(struct drm_crtc *crtc) From fc10332b8ac5ca32d11f898027d84c007543bd80 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 19 Jan 2010 17:16:10 -0500 Subject: [PATCH 1340/1626] drm/radeon/kms: clean up pll struct - add a new flag for fixed post div - pull the pll flags into the struct Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 35 ++++++++++----------- drivers/gpu/drm/radeon/radeon_display.c | 35 +++++++++++---------- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 14 ++++----- drivers/gpu/drm/radeon/radeon_mode.h | 27 +++++++++++----- 4 files changed, 62 insertions(+), 49 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 7af5c1f7b6de..7a8cdf2813dc 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -426,7 +426,11 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) uint32_t adjusted_clock; uint32_t ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0; struct radeon_pll *pll; - int pll_flags = 0; + + if (radeon_crtc->crtc_id == 0) + pll = &rdev->clock.p1pll; + else + pll = &rdev->clock.p2pll; memset(&args, 0, sizeof(args)); @@ -434,20 +438,20 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) if ((rdev->family == CHIP_RS600) || (rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740)) - pll_flags |= (RADEON_PLL_USE_FRAC_FB_DIV | - RADEON_PLL_PREFER_CLOSEST_LOWER); + pll->flags |= (RADEON_PLL_USE_FRAC_FB_DIV | + RADEON_PLL_PREFER_CLOSEST_LOWER); if (ASIC_IS_DCE32(rdev) && mode->clock > 200000) /* range limits??? */ - pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV; + pll->flags |= RADEON_PLL_PREFER_HIGH_FB_DIV; else - pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV; + pll->flags |= RADEON_PLL_PREFER_LOW_REF_DIV; } else { - pll_flags |= RADEON_PLL_LEGACY; + pll->flags |= RADEON_PLL_LEGACY; if (mode->clock > 200000) /* range limits??? */ - pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV; + pll->flags |= RADEON_PLL_PREFER_HIGH_FB_DIV; else - pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV; + pll->flags |= RADEON_PLL_PREFER_LOW_REF_DIV; } @@ -456,10 +460,10 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) if (!ASIC_IS_AVIVO(rdev)) { if (encoder->encoder_type != DRM_MODE_ENCODER_DAC) - pll_flags |= RADEON_PLL_NO_ODD_POST_DIV; + pll->flags |= RADEON_PLL_NO_ODD_POST_DIV; if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS) - pll_flags |= RADEON_PLL_USE_REF_DIV; + pll->flags |= RADEON_PLL_USE_REF_DIV; } radeon_encoder = to_radeon_encoder(encoder); break; @@ -494,23 +498,18 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) adjusted_clock = mode->clock; } - if (radeon_crtc->crtc_id == 0) - pll = &rdev->clock.p1pll; - else - pll = &rdev->clock.p2pll; - if (ASIC_IS_AVIVO(rdev)) { if (radeon_new_pll) radeon_compute_pll_avivo(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, - &ref_div, &post_div, pll_flags); + &ref_div, &post_div); else radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, - &ref_div, &post_div, pll_flags); + &ref_div, &post_div); } else radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, - &ref_div, &post_div, pll_flags); + &ref_div, &post_div); index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index f899320f0a6b..6a92f994cc26 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -411,11 +411,12 @@ void radeon_compute_pll(struct radeon_pll *pll, uint32_t *fb_div_p, uint32_t *frac_fb_div_p, uint32_t *ref_div_p, - uint32_t *post_div_p, - int flags) + uint32_t *post_div_p) { uint32_t min_ref_div = pll->min_ref_div; uint32_t max_ref_div = pll->max_ref_div; + uint32_t min_post_div = pll->min_post_div; + uint32_t max_post_div = pll->max_post_div; uint32_t min_fractional_feed_div = 0; uint32_t max_fractional_feed_div = 0; uint32_t best_vco = pll->best_vco; @@ -431,7 +432,7 @@ void radeon_compute_pll(struct radeon_pll *pll, DRM_DEBUG("PLL freq %llu %u %u\n", freq, pll->min_ref_div, pll->max_ref_div); freq = freq * 1000; - if (flags & RADEON_PLL_USE_REF_DIV) + if (pll->flags & RADEON_PLL_USE_REF_DIV) min_ref_div = max_ref_div = pll->reference_div; else { while (min_ref_div < max_ref_div-1) { @@ -446,19 +447,22 @@ void radeon_compute_pll(struct radeon_pll *pll, } } - if (flags & RADEON_PLL_USE_FRAC_FB_DIV) { + if (pll->flags & RADEON_PLL_USE_POST_DIV) + min_post_div = max_post_div = pll->post_div; + + if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV) { min_fractional_feed_div = pll->min_frac_feedback_div; max_fractional_feed_div = pll->max_frac_feedback_div; } - for (post_div = pll->min_post_div; post_div <= pll->max_post_div; ++post_div) { + for (post_div = min_post_div; post_div <= max_post_div; ++post_div) { uint32_t ref_div; - if ((flags & RADEON_PLL_NO_ODD_POST_DIV) && (post_div & 1)) + if ((pll->flags & RADEON_PLL_NO_ODD_POST_DIV) && (post_div & 1)) continue; /* legacy radeons only have a few post_divs */ - if (flags & RADEON_PLL_LEGACY) { + if (pll->flags & RADEON_PLL_LEGACY) { if ((post_div == 5) || (post_div == 7) || (post_div == 9) || @@ -505,7 +509,7 @@ void radeon_compute_pll(struct radeon_pll *pll, tmp += (uint64_t)pll->reference_freq * 1000 * frac_feedback_div; current_freq = radeon_div(tmp, ref_div * post_div); - if (flags & RADEON_PLL_PREFER_CLOSEST_LOWER) { + if (pll->flags & RADEON_PLL_PREFER_CLOSEST_LOWER) { error = freq - current_freq; error = error < 0 ? 0xffffffff : error; } else @@ -532,12 +536,12 @@ void radeon_compute_pll(struct radeon_pll *pll, best_freq = current_freq; best_error = error; best_vco_diff = vco_diff; - } else if (((flags & RADEON_PLL_PREFER_LOW_REF_DIV) && (ref_div < best_ref_div)) || - ((flags & RADEON_PLL_PREFER_HIGH_REF_DIV) && (ref_div > best_ref_div)) || - ((flags & RADEON_PLL_PREFER_LOW_FB_DIV) && (feedback_div < best_feedback_div)) || - ((flags & RADEON_PLL_PREFER_HIGH_FB_DIV) && (feedback_div > best_feedback_div)) || - ((flags & RADEON_PLL_PREFER_LOW_POST_DIV) && (post_div < best_post_div)) || - ((flags & RADEON_PLL_PREFER_HIGH_POST_DIV) && (post_div > best_post_div))) { + } else if (((pll->flags & RADEON_PLL_PREFER_LOW_REF_DIV) && (ref_div < best_ref_div)) || + ((pll->flags & RADEON_PLL_PREFER_HIGH_REF_DIV) && (ref_div > best_ref_div)) || + ((pll->flags & RADEON_PLL_PREFER_LOW_FB_DIV) && (feedback_div < best_feedback_div)) || + ((pll->flags & RADEON_PLL_PREFER_HIGH_FB_DIV) && (feedback_div > best_feedback_div)) || + ((pll->flags & RADEON_PLL_PREFER_LOW_POST_DIV) && (post_div < best_post_div)) || + ((pll->flags & RADEON_PLL_PREFER_HIGH_POST_DIV) && (post_div > best_post_div))) { best_post_div = post_div; best_ref_div = ref_div; best_feedback_div = feedback_div; @@ -573,8 +577,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, uint32_t *fb_div_p, uint32_t *frac_fb_div_p, uint32_t *ref_div_p, - uint32_t *post_div_p, - int flags) + uint32_t *post_div_p) { fixed20_12 m, n, frac_n, p, f_vco, f_pclk, best_freq; fixed20_12 pll_out_max, pll_out_min; diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 762e07b08951..b6d8081e1246 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -692,7 +692,6 @@ static void radeon_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) uint32_t post_divider = 0; uint32_t freq = 0; uint8_t pll_gain; - int pll_flags = RADEON_PLL_LEGACY; bool use_bios_divs = false; /* PLL registers */ uint32_t pll_ref_div = 0; @@ -726,10 +725,12 @@ static void radeon_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) else pll = &rdev->clock.p1pll; + pll->flags = RADEON_PLL_LEGACY; + if (mode->clock > 200000) /* range limits??? */ - pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV; + pll->flags |= RADEON_PLL_PREFER_HIGH_FB_DIV; else - pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV; + pll->flags |= RADEON_PLL_PREFER_LOW_REF_DIV; list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { if (encoder->crtc == crtc) { @@ -741,7 +742,7 @@ static void radeon_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) } if (encoder->encoder_type != DRM_MODE_ENCODER_DAC) - pll_flags |= RADEON_PLL_NO_ODD_POST_DIV; + pll->flags |= RADEON_PLL_NO_ODD_POST_DIV; if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS) { if (!rdev->is_atom_bios) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); @@ -756,7 +757,7 @@ static void radeon_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) } } } - pll_flags |= RADEON_PLL_USE_REF_DIV; + pll->flags |= RADEON_PLL_USE_REF_DIV; } } } @@ -766,8 +767,7 @@ static void radeon_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) if (!use_bios_divs) { radeon_compute_pll(pll, mode->clock, &freq, &feedback_div, &frac_fb_div, - &reference_div, &post_divider, - pll_flags); + &reference_div, &post_divider); for (post_div = &post_divs[0]; post_div->divider; ++post_div) { if (post_div->divider == post_divider) diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index eb19b3022b0e..96b851f92f4c 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -125,16 +125,24 @@ struct radeon_tmds_pll { #define RADEON_PLL_PREFER_HIGH_POST_DIV (1 << 9) #define RADEON_PLL_USE_FRAC_FB_DIV (1 << 10) #define RADEON_PLL_PREFER_CLOSEST_LOWER (1 << 11) +#define RADEON_PLL_USE_POST_DIV (1 << 12) struct radeon_pll { - uint16_t reference_freq; - uint16_t reference_div; + /* reference frequency */ + uint32_t reference_freq; + + /* fixed dividers */ + uint32_t reference_div; + uint32_t post_div; + + /* pll in/out limits */ uint32_t pll_in_min; uint32_t pll_in_max; uint32_t pll_out_min; uint32_t pll_out_max; - uint16_t xclk; + uint32_t best_vco; + /* divider limits */ uint32_t min_ref_div; uint32_t max_ref_div; uint32_t min_post_div; @@ -143,7 +151,12 @@ struct radeon_pll { uint32_t max_feedback_div; uint32_t min_frac_feedback_div; uint32_t max_frac_feedback_div; - uint32_t best_vco; + + /* flags for the current clock */ + uint32_t flags; + + /* pll id */ + uint32_t id; }; struct radeon_i2c_chan { @@ -417,8 +430,7 @@ extern void radeon_compute_pll(struct radeon_pll *pll, uint32_t *fb_div_p, uint32_t *frac_fb_div_p, uint32_t *ref_div_p, - uint32_t *post_div_p, - int flags); + uint32_t *post_div_p); extern void radeon_compute_pll_avivo(struct radeon_pll *pll, uint64_t freq, @@ -426,8 +438,7 @@ extern void radeon_compute_pll_avivo(struct radeon_pll *pll, uint32_t *fb_div_p, uint32_t *frac_fb_div_p, uint32_t *ref_div_p, - uint32_t *post_div_p, - int flags); + uint32_t *post_div_p); extern void radeon_setup_encoder_clones(struct drm_device *dev); From 4eaeca33512b9774c25507b9a9bdcfe3791a5cc5 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 19 Jan 2010 17:32:27 -0500 Subject: [PATCH 1341/1626] drm/radeon/kms: clean up atombios pll code - split pll adjust into a separate function - use a union for SetPixelClock params Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 196 +++++++++++++++---------- 1 file changed, 121 insertions(+), 75 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 7a8cdf2813dc..e619aca5423f 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -409,30 +409,22 @@ static void atombios_set_ss(struct drm_crtc *crtc, int enable) } } -void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) +union adjust_pixel_clock { + ADJUST_DISPLAY_PLL_PS_ALLOCATION v1; +}; + +static u32 atombios_adjust_pll(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct radeon_pll *pll) { - struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; struct drm_encoder *encoder = NULL; struct radeon_encoder *radeon_encoder = NULL; - uint8_t frev, crev; - int index; - SET_PIXEL_CLOCK_PS_ALLOCATION args; - PIXEL_CLOCK_PARAMETERS *spc1_ptr; - PIXEL_CLOCK_PARAMETERS_V2 *spc2_ptr; - PIXEL_CLOCK_PARAMETERS_V3 *spc3_ptr; - uint32_t pll_clock = mode->clock; - uint32_t adjusted_clock; - uint32_t ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0; - struct radeon_pll *pll; + u32 adjusted_clock = mode->clock; - if (radeon_crtc->crtc_id == 0) - pll = &rdev->clock.p1pll; - else - pll = &rdev->clock.p2pll; - - memset(&args, 0, sizeof(args)); + /* reset the pll flags */ + pll->flags = 0; if (ASIC_IS_AVIVO(rdev)) { if ((rdev->family == CHIP_RS600) || @@ -457,15 +449,17 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { if (encoder->crtc == crtc) { - if (!ASIC_IS_AVIVO(rdev)) { - if (encoder->encoder_type != - DRM_MODE_ENCODER_DAC) + radeon_encoder = to_radeon_encoder(encoder); + if (ASIC_IS_AVIVO(rdev)) { + /* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */ + if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1) + adjusted_clock = mode->clock * 2; + } else { + if (encoder->encoder_type != DRM_MODE_ENCODER_DAC) pll->flags |= RADEON_PLL_NO_ODD_POST_DIV; - if (encoder->encoder_type == - DRM_MODE_ENCODER_LVDS) + if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS) pll->flags |= RADEON_PLL_USE_REF_DIV; } - radeon_encoder = to_radeon_encoder(encoder); break; } } @@ -475,28 +469,88 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) * special hw requirements. */ if (ASIC_IS_DCE3(rdev)) { - ADJUST_DISPLAY_PLL_PS_ALLOCATION adjust_pll_args; + union adjust_pixel_clock args; + struct radeon_encoder_atom_dig *dig; + u8 frev, crev; + int index; - if (!encoder) - return; - - memset(&adjust_pll_args, 0, sizeof(adjust_pll_args)); - adjust_pll_args.usPixelClock = cpu_to_le16(mode->clock / 10); - adjust_pll_args.ucTransmitterID = radeon_encoder->encoder_id; - adjust_pll_args.ucEncodeMode = atombios_get_encoder_mode(encoder); + if (!radeon_encoder->enc_priv) + return adjusted_clock; + dig = radeon_encoder->enc_priv; index = GetIndexIntoMasterTable(COMMAND, AdjustDisplayPll); - atom_execute_table(rdev->mode_info.atom_context, - index, (uint32_t *)&adjust_pll_args); - adjusted_clock = le16_to_cpu(adjust_pll_args.usPixelClock) * 10; - } else { - /* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */ - if (ASIC_IS_AVIVO(rdev) && - (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1)) - adjusted_clock = mode->clock * 2; - else - adjusted_clock = mode->clock; + atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, + &crev); + + memset(&args, 0, sizeof(args)); + + switch (frev) { + case 1: + switch (crev) { + case 1: + case 2: + args.v1.usPixelClock = cpu_to_le16(mode->clock / 10); + args.v1.ucTransmitterID = radeon_encoder->encoder_id; + args.v1.ucEncodeMode = atombios_get_encoder_mode(encoder); + + atom_execute_table(rdev->mode_info.atom_context, + index, (uint32_t *)&args); + adjusted_clock = le16_to_cpu(args.v1.usPixelClock) * 10; + break; + default: + DRM_ERROR("Unknown table version %d %d\n", frev, crev); + return adjusted_clock; + } + break; + default: + DRM_ERROR("Unknown table version %d %d\n", frev, crev); + return adjusted_clock; + } } + return adjusted_clock; +} + +union set_pixel_clock { + SET_PIXEL_CLOCK_PS_ALLOCATION base; + PIXEL_CLOCK_PARAMETERS v1; + PIXEL_CLOCK_PARAMETERS_V2 v2; + PIXEL_CLOCK_PARAMETERS_V3 v3; +}; + +void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) +{ + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + struct drm_device *dev = crtc->dev; + struct radeon_device *rdev = dev->dev_private; + struct drm_encoder *encoder = NULL; + struct radeon_encoder *radeon_encoder = NULL; + u8 frev, crev; + int index; + union set_pixel_clock args; + u32 pll_clock = mode->clock; + u32 ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0; + struct radeon_pll *pll; + u32 adjusted_clock; + + memset(&args, 0, sizeof(args)); + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + if (encoder->crtc == crtc) { + radeon_encoder = to_radeon_encoder(encoder); + break; + } + } + + if (!radeon_encoder) + return; + + if (radeon_crtc->crtc_id == 0) + pll = &rdev->clock.p1pll; + else + pll = &rdev->clock.p2pll; + + /* adjust pixel clock as needed */ + adjusted_clock = atombios_adjust_pll(crtc, mode, pll); if (ASIC_IS_AVIVO(rdev)) { if (radeon_new_pll) @@ -519,45 +573,38 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) case 1: switch (crev) { case 1: - spc1_ptr = (PIXEL_CLOCK_PARAMETERS *) & args.sPCLKInput; - spc1_ptr->usPixelClock = cpu_to_le16(mode->clock / 10); - spc1_ptr->usRefDiv = cpu_to_le16(ref_div); - spc1_ptr->usFbDiv = cpu_to_le16(fb_div); - spc1_ptr->ucFracFbDiv = frac_fb_div; - spc1_ptr->ucPostDiv = post_div; - spc1_ptr->ucPpll = + args.v1.usPixelClock = cpu_to_le16(mode->clock / 10); + args.v1.usRefDiv = cpu_to_le16(ref_div); + args.v1.usFbDiv = cpu_to_le16(fb_div); + args.v1.ucFracFbDiv = frac_fb_div; + args.v1.ucPostDiv = post_div; + args.v1.ucPpll = radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1; - spc1_ptr->ucCRTC = radeon_crtc->crtc_id; - spc1_ptr->ucRefDivSrc = 1; + args.v1.ucCRTC = radeon_crtc->crtc_id; + args.v1.ucRefDivSrc = 1; break; case 2: - spc2_ptr = - (PIXEL_CLOCK_PARAMETERS_V2 *) & args.sPCLKInput; - spc2_ptr->usPixelClock = cpu_to_le16(mode->clock / 10); - spc2_ptr->usRefDiv = cpu_to_le16(ref_div); - spc2_ptr->usFbDiv = cpu_to_le16(fb_div); - spc2_ptr->ucFracFbDiv = frac_fb_div; - spc2_ptr->ucPostDiv = post_div; - spc2_ptr->ucPpll = + args.v2.usPixelClock = cpu_to_le16(mode->clock / 10); + args.v2.usRefDiv = cpu_to_le16(ref_div); + args.v2.usFbDiv = cpu_to_le16(fb_div); + args.v2.ucFracFbDiv = frac_fb_div; + args.v2.ucPostDiv = post_div; + args.v2.ucPpll = radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1; - spc2_ptr->ucCRTC = radeon_crtc->crtc_id; - spc2_ptr->ucRefDivSrc = 1; + args.v2.ucCRTC = radeon_crtc->crtc_id; + args.v2.ucRefDivSrc = 1; break; case 3: - if (!encoder) - return; - spc3_ptr = - (PIXEL_CLOCK_PARAMETERS_V3 *) & args.sPCLKInput; - spc3_ptr->usPixelClock = cpu_to_le16(mode->clock / 10); - spc3_ptr->usRefDiv = cpu_to_le16(ref_div); - spc3_ptr->usFbDiv = cpu_to_le16(fb_div); - spc3_ptr->ucFracFbDiv = frac_fb_div; - spc3_ptr->ucPostDiv = post_div; - spc3_ptr->ucPpll = + args.v3.usPixelClock = cpu_to_le16(mode->clock / 10); + args.v3.usRefDiv = cpu_to_le16(ref_div); + args.v3.usFbDiv = cpu_to_le16(fb_div); + args.v3.ucFracFbDiv = frac_fb_div; + args.v3.ucPostDiv = post_div; + args.v3.ucPpll = radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1; - spc3_ptr->ucMiscInfo = (radeon_crtc->crtc_id << 2); - spc3_ptr->ucTransmitterId = radeon_encoder->encoder_id; - spc3_ptr->ucEncoderMode = + args.v3.ucMiscInfo = (radeon_crtc->crtc_id << 2); + args.v3.ucTransmitterId = radeon_encoder->encoder_id; + args.v3.ucEncoderMode = atombios_get_encoder_mode(encoder); break; default: @@ -570,7 +617,6 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) return; } - printk("executing set pll\n"); atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } From 947bfc83043181e86e3e3134da158e479c9bcc51 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 21 Jan 2010 17:14:49 -0500 Subject: [PATCH 1342/1626] drm/radeon/kms/atom: atom parser fixes Only reset the reg block on the initial execute table call; nested calls require the reg block not be reset on each call. Also reset the fb window and io mode. This matches the upstream parser behavior. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atom.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c index cf3126108a48..e3b44562d265 100644 --- a/drivers/gpu/drm/radeon/atom.c +++ b/drivers/gpu/drm/radeon/atom.c @@ -1122,8 +1122,6 @@ static void atom_execute_table_locked(struct atom_context *ctx, int index, uint3 SDEBUG(">> execute %04X (len %d, WS %d, PS %d)\n", base, len, ws, ps); - /* reset reg block */ - ctx->reg_block = 0; ectx.ctx = ctx; ectx.ps_shift = ps / 4; ectx.start = base; @@ -1160,6 +1158,12 @@ static void atom_execute_table_locked(struct atom_context *ctx, int index, uint3 void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params) { mutex_lock(&ctx->mutex); + /* reset reg block */ + ctx->reg_block = 0; + /* reset fb window */ + ctx->fb_base = 0; + /* reset io mode */ + ctx->io_mode = ATOM_IO_MM; atom_execute_table_locked(ctx, index, params); mutex_unlock(&ctx->mutex); } From 38678d3557420a1c40f7ad5a04a46a7de7a305b9 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 21 Jan 2010 19:28:18 -0500 Subject: [PATCH 1343/1626] drm/radeon/kms: fix legacy get_engine/memory clock Fix a bad shift in the post div. Should fix fdo bug 26145 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_clocks.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c index 812f24dbc2a8..73c4405bf42f 100644 --- a/drivers/gpu/drm/radeon/radeon_clocks.c +++ b/drivers/gpu/drm/radeon/radeon_clocks.c @@ -56,7 +56,7 @@ uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev) else if (post_div == 3) sclk >>= 2; else if (post_div == 4) - sclk >>= 4; + sclk >>= 3; return sclk; } @@ -86,7 +86,7 @@ uint32_t radeon_legacy_get_memory_clock(struct radeon_device *rdev) else if (post_div == 3) mclk >>= 2; else if (post_div == 4) - mclk >>= 4; + mclk >>= 3; return mclk; } From a1ee06b72968d80ab9362ec61143c4f090cc2d1b Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Thu, 21 Jan 2010 18:55:32 +0100 Subject: [PATCH 1344/1626] i2c: mxc: let time to generate stop bit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After generating the stop bit by changing MSTA from 1 to 0, the i2c_imx->stopped was immediatly set to 1. The second test on i2c_imx->stopped then is correct and the controller never waits if the bus is busy. This patch corrects this. On mx31moboard, stop bit was not generated on single write transfers. This was kept unnoticed as other transfers are made afterwards that help the write recipient to resynchronize. Thanks to Philippe and Michael for the debugging. Signed-off-by: Valentin Longchamp Signed-off by: Philippe Rétornaz Reported-by: Michael Bonani Acked-by; Wolfram Sang Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-imx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index e3654d683e15..602b30e32cf3 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -226,7 +226,6 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) temp = readb(i2c_imx->base + IMX_I2C_I2CR); temp &= ~(I2CR_MSTA | I2CR_MTX); writeb(temp, i2c_imx->base + IMX_I2C_I2CR); - i2c_imx->stopped = 1; } if (cpu_is_mx1()) { /* @@ -236,8 +235,10 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) udelay(i2c_imx->disable_delay); } - if (!i2c_imx->stopped) + if (!i2c_imx->stopped) { i2c_imx_bus_busy(i2c_imx, 0); + i2c_imx->stopped = 1; + } /* Disable I2C controller */ writeb(0, i2c_imx->base + IMX_I2C_I2CR); From 4927fbf11dc1057cd9c94dd40358e5f98c999311 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 8 Jan 2010 17:23:17 +0100 Subject: [PATCH 1345/1626] i2c: imx: call ioremap only after request_mem_region MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit accordingly adapt order of release_mem_region and release_mem_region on remove. Signed-off-by: Uwe Kleine-König Cc: Ben Dooks Cc: Wolfram Sang Cc: Richard Zhao Cc: Darius Augulis Cc: Sascha Hauer Cc: linux-i2c@vger.kernel.org Acked-by: Wolfram Sang Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-imx.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 602b30e32cf3..75bf820e7ccb 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -497,22 +497,23 @@ static int __init i2c_imx_probe(struct platform_device *pdev) } res_size = resource_size(res); + + if (!request_mem_region(res->start, res_size, DRIVER_NAME)) { + ret = -EBUSY; + goto fail0; + } + base = ioremap(res->start, res_size); if (!base) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -EIO; - goto fail0; + goto fail1; } i2c_imx = kzalloc(sizeof(struct imx_i2c_struct), GFP_KERNEL); if (!i2c_imx) { dev_err(&pdev->dev, "can't allocate interface\n"); ret = -ENOMEM; - goto fail1; - } - - if (!request_mem_region(res->start, res_size, DRIVER_NAME)) { - ret = -EBUSY; goto fail2; } @@ -583,11 +584,11 @@ fail5: fail4: clk_put(i2c_imx->clk); fail3: - release_mem_region(i2c_imx->res->start, resource_size(res)); -fail2: kfree(i2c_imx); -fail1: +fail2: iounmap(base); +fail1: + release_mem_region(res->start, resource_size(res)); fail0: if (pdata && pdata->exit) pdata->exit(&pdev->dev); @@ -619,8 +620,8 @@ static int __exit i2c_imx_remove(struct platform_device *pdev) clk_put(i2c_imx->clk); - release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res)); iounmap(i2c_imx->base); + release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res)); kfree(i2c_imx); return 0; } From a1470890f29da73783e932078ed911f5871e3ad3 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 18 Jan 2010 11:42:37 +1000 Subject: [PATCH 1346/1626] drm/nouveau: report LVDS as disconnected if lid closed Also adds a module option to ignore the status reported via ACPI, in case we hit systems with broken ACPI. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_connector.c | 7 +++++++ drivers/gpu/drm/nouveau/nouveau_drv.c | 4 ++++ drivers/gpu/drm/nouveau/nouveau_drv.h | 1 + 3 files changed, 12 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 8da35281a0c3..7e6d673f3a23 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -24,9 +24,12 @@ * */ +#include + #include "drmP.h" #include "drm_edid.h" #include "drm_crtc_helper.h" + #include "nouveau_reg.h" #include "nouveau_drv.h" #include "nouveau_encoder.h" @@ -235,6 +238,10 @@ nouveau_connector_detect(struct drm_connector *connector) if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS) nv_encoder = find_encoder_by_type(connector, OUTPUT_LVDS); if (nv_encoder && nv_connector->native_mode) { +#ifdef CONFIG_ACPI + if (!nouveau_ignorelid && !acpi_lid_open()) + return connector_status_disconnected; +#endif nouveau_connector_set_encoder(connector, nv_encoder); return connector_status_connected; } diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c index 06eb993e0883..343ab7f17ccc 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.c +++ b/drivers/gpu/drm/nouveau/nouveau_drv.c @@ -71,6 +71,10 @@ MODULE_PARM_DESC(uscript_tmds, "TMDS output script table ID (>=GeForce 8)"); int nouveau_uscript_tmds = -1; module_param_named(uscript_tmds, nouveau_uscript_tmds, int, 0400); +MODULE_PARM_DESC(ignorelid, "Ignore ACPI lid status"); +int nouveau_ignorelid = 0; +module_param_named(ignorelid, nouveau_ignorelid, int, 0400); + MODULE_PARM_DESC(tv_norm, "Default TV norm.\n" "\t\tSupported: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J,\n" "\t\t\thd480i, hd480p, hd576i, hd576p, hd720p, hd1080i.\n" diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index cc36866e2a9f..6b9690418bc7 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -677,6 +677,7 @@ extern char *nouveau_tv_norm; extern int nouveau_reg_debug; extern char *nouveau_vbios; extern int nouveau_ctxfw; +extern int nouveau_ignorelid; /* nouveau_state.c */ extern void nouveau_preclose(struct drm_device *dev, struct drm_file *); From 0208843dd59330c30e0773c77d5362260aa340e0 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 21 Jan 2010 15:03:23 +1000 Subject: [PATCH 1347/1626] drm/nouveau: fix failure path if userspace specifies no valid memtypes We need to add the buffer to the list even if we fail, otherwise the validate_fini() call won't unreserve + unreference the GEM object, making TTM very unhappy. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_gem.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c index 504833044080..6ac804b0c9f9 100644 --- a/drivers/gpu/drm/nouveau/nouveau_gem.c +++ b/drivers/gpu/drm/nouveau/nouveau_gem.c @@ -321,6 +321,7 @@ retry: else { NV_ERROR(dev, "invalid valid domains: 0x%08x\n", b->valid_domains); + list_add_tail(&nvbo->entry, &op->both_list); validate_fini(op, NULL); return -EINVAL; } From 0107bae01add219e1a146f2b412d64a7f1946028 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 22 Jan 2010 09:10:05 +1000 Subject: [PATCH 1348/1626] drm/nv50: fail auxch transaction if reply count not what we expect Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_dp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c index 9e2926c48579..dd4937224220 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dp.c +++ b/drivers/gpu/drm/nouveau/nouveau_dp.c @@ -490,7 +490,8 @@ nouveau_dp_auxch(struct nouveau_i2c_chan *auxch, int cmd, int addr, if (!nv_wait(NV50_AUXCH_CTRL(index), 0x00010000, 0x00000000)) { NV_ERROR(dev, "expected bit 16 == 0, got 0x%08x\n", nv_rd32(dev, NV50_AUXCH_CTRL(index))); - return -EBUSY; + ret = -EBUSY; + goto out; } udelay(400); @@ -501,6 +502,11 @@ nouveau_dp_auxch(struct nouveau_i2c_chan *auxch, int cmd, int addr, break; } + if ((stat & NV50_AUXCH_STAT_COUNT) != data_nr) { + ret = -EREMOTEIO; + goto out; + } + if (cmd & 1) { for (i = 0; i < 4; i++) { data32[i] = nv_rd32(dev, NV50_AUXCH_DATA_IN(index, i)); From 162265367a96d381f07066581d65e52627b08618 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 22 Jan 2010 10:57:01 +1000 Subject: [PATCH 1349/1626] drm/nv50: prevent switching off SOR when in use for DVI-over-DP Another hack because of us exposing each encoder block's function as an encoder rather than exposing a single encoder that deals with them all. A proper fix will come, it's just rather invasive so this hack will do until then. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_sor.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nv50_sor.c b/drivers/gpu/drm/nouveau/nv50_sor.c index e395c16d30f5..ecf1936b8224 100644 --- a/drivers/gpu/drm/nouveau/nv50_sor.c +++ b/drivers/gpu/drm/nouveau/nv50_sor.c @@ -90,11 +90,24 @@ nv50_sor_dpms(struct drm_encoder *encoder, int mode) { struct drm_device *dev = encoder->dev; struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); + struct drm_encoder *enc; uint32_t val; int or = nv_encoder->or; NV_DEBUG_KMS(dev, "or %d mode %d\n", or, mode); + nv_encoder->last_dpms = mode; + list_for_each_entry(enc, &dev->mode_config.encoder_list, head) { + struct nouveau_encoder *nvenc = nouveau_encoder(enc); + + if (nvenc == nv_encoder || + nvenc->dcb->or != nv_encoder->dcb->or) + continue; + + if (nvenc->last_dpms == DRM_MODE_DPMS_ON) + return; + } + /* wait for it to be done */ if (!nv_wait(NV50_PDISPLAY_SOR_DPMS_CTRL(or), NV50_PDISPLAY_SOR_DPMS_CTRL_PENDING, 0)) { From 1a961ce09fe39df9a1b796df98794fd32c76c413 Mon Sep 17 00:00:00 2001 From: Luca Barbieri Date: Wed, 20 Jan 2010 20:01:30 +0100 Subject: [PATCH 1350/1626] drm/ttm: Fix race condition in ttm_bo_delayed_delete (v3, final) Resending this with Thomas Hellstrom's signoff for merging into 2.6.33 ttm_bo_delayed_delete has a race condition, because after we do: kref_put(&nentry->list_kref, ttm_bo_release_list); we are not holding the list lock and not holding any reference to objects, and thus every bo in the list can be removed and freed at this point. However, we then use the next pointer we stored, which is not guaranteed to be valid. This was apparently the cause of some Nouveau oopses I experienced. This patch rewrites the function so that it keeps the reference to nentry until nentry itself is freed and we already got a reference to nentry->next. v2 updated by me according to Thomas Hellstrom's feedback. v3 proposed by Thomas Hellstrom. Commit comment updated by me. Both updates fixed minor efficiency/style issues only and all three versions should be correct. Signed-off-by: Luca Barbieri Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo.c | 54 +++++++++++++++--------------------- 1 file changed, 23 insertions(+), 31 deletions(-) diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index da3702135ada..8036b6e189ee 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -524,52 +524,44 @@ static int ttm_bo_cleanup_refs(struct ttm_buffer_object *bo, bool remove_all) static int ttm_bo_delayed_delete(struct ttm_bo_device *bdev, bool remove_all) { struct ttm_bo_global *glob = bdev->glob; - struct ttm_buffer_object *entry, *nentry; - struct list_head *list, *next; - int ret; + struct ttm_buffer_object *entry = NULL; + int ret = 0; spin_lock(&glob->lru_lock); - list_for_each_safe(list, next, &bdev->ddestroy) { - entry = list_entry(list, struct ttm_buffer_object, ddestroy); - nentry = NULL; + if (list_empty(&bdev->ddestroy)) + goto out_unlock; - /* - * Protect the next list entry from destruction while we - * unlock the lru_lock. - */ + entry = list_first_entry(&bdev->ddestroy, + struct ttm_buffer_object, ddestroy); + kref_get(&entry->list_kref); - if (next != &bdev->ddestroy) { - nentry = list_entry(next, struct ttm_buffer_object, - ddestroy); + for (;;) { + struct ttm_buffer_object *nentry = NULL; + + if (entry->ddestroy.next != &bdev->ddestroy) { + nentry = list_first_entry(&entry->ddestroy, + struct ttm_buffer_object, ddestroy); kref_get(&nentry->list_kref); } - kref_get(&entry->list_kref); spin_unlock(&glob->lru_lock); ret = ttm_bo_cleanup_refs(entry, remove_all); kref_put(&entry->list_kref, ttm_bo_release_list); + entry = nentry; + + if (ret || !entry) + goto out; spin_lock(&glob->lru_lock); - if (nentry) { - bool next_onlist = !list_empty(next); - spin_unlock(&glob->lru_lock); - kref_put(&nentry->list_kref, ttm_bo_release_list); - spin_lock(&glob->lru_lock); - /* - * Someone might have raced us and removed the - * next entry from the list. We don't bother restarting - * list traversal. - */ - - if (!next_onlist) - break; - } - if (ret) + if (list_empty(&entry->ddestroy)) break; } - ret = !list_empty(&bdev->ddestroy); - spin_unlock(&glob->lru_lock); +out_unlock: + spin_unlock(&glob->lru_lock); +out: + if (entry) + kref_put(&entry->list_kref, ttm_bo_release_list); return ret; } From cf11052a95275c942c1f45ea5fde43ce45bbba6d Mon Sep 17 00:00:00 2001 From: Erik Benada Date: Sun, 24 Jan 2010 13:43:04 -0800 Subject: [PATCH 1351/1626] [ARM] orion5x: D-link DNS-323 rev. B1 power-off This patch fixes power LED blinking and power-off on DNS-323 rev. B1. GPIO pin 3 has to be set to 1 to stop power LED blinking and to allow the LED to be controlled via leds-gpio. This pin has to be also set to 1 for power-off to work. To power-off the rev. B1 machine, pin 8 has to be set to 1 and then set to 0 to do actual power-off. Tested on my DNS-323 rev. B1 Signed-off-by: Erik Benada Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion5x/dns323-setup.c | 33 +++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index b31ca4cef365..8f159db4d08a 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -32,6 +33,7 @@ #define DNS323_GPIO_LED_RIGHT_AMBER 1 #define DNS323_GPIO_LED_LEFT_AMBER 2 +#define DNS323_GPIO_SYSTEM_UP 3 #define DNS323_GPIO_LED_POWER 5 #define DNS323_GPIO_OVERTEMP 6 #define DNS323_GPIO_RTC 7 @@ -239,7 +241,7 @@ static struct gpio_led dns323_leds[] = { { .name = "power:blue", .gpio = DNS323_GPIO_LED_POWER, - .active_low = 1, + .default_state = LEDS_GPIO_DEFSTATE_ON, }, { .name = "right:amber", .gpio = DNS323_GPIO_LED_RIGHT_AMBER, @@ -334,7 +336,7 @@ static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = { { 0, MPP_UNUSED }, { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ - { 3, MPP_UNUSED }, + { 3, MPP_GPIO }, /* system up flag */ { 4, MPP_GPIO }, /* power button LED */ { 5, MPP_GPIO }, /* power button LED */ { 6, MPP_GPIO }, /* GMT G751-2f overtemp */ @@ -372,13 +374,23 @@ static struct i2c_board_info __initdata dns323_i2c_devices[] = { }, }; -/* DNS-323 specific power off method */ -static void dns323_power_off(void) +/* DNS-323 rev. A specific power off method */ +static void dns323a_power_off(void) { pr_info("%s: triggering power-off...\n", __func__); gpio_set_value(DNS323_GPIO_POWER_OFF, 1); } +/* DNS-323 rev B specific power off method */ +static void dns323b_power_off(void) +{ + pr_info("%s: triggering power-off...\n", __func__); + /* Pin has to be changed to 1 and back to 0 to do actual power off. */ + gpio_set_value(DNS323_GPIO_POWER_OFF, 1); + mdelay(100); + gpio_set_value(DNS323_GPIO_POWER_OFF, 0); +} + static void __init dns323_init(void) { /* Setup basic Orion functions. Need to be called early. */ @@ -424,11 +436,20 @@ static void __init dns323_init(void) if (dns323_dev_id() == MV88F5182_DEV_ID) orion5x_sata_init(&dns323_sata_data); - /* register dns323 specific power-off method */ + /* The 5182 has flag to indicate the system is up. Without this flag + * set, power LED will flash and cannot be controlled via leds-gpio. + */ + if (dns323_dev_id() == MV88F5182_DEV_ID) + gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1); + + /* Register dns323 specific power-off method */ if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) pr_err("DNS323: failed to setup power-off GPIO\n"); - pm_power_off = dns323_power_off; + if (dns323_dev_id() == MV88F5182_DEV_ID) + pm_power_off = dns323b_power_off; + else + pm_power_off = dns323a_power_off; } /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ From 2dc85e91d05be91343033df78e4e6d99dc7ea50e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 24 Jan 2010 19:52:24 -0800 Subject: [PATCH 1352/1626] vlan: fix vlan_skb_recv() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bruno Prémont found commit 9793241fe92f7d930 (vlan: Precise RX stats accounting) added a regression for non hw accelerated vlans. [ 26.390576] BUG: unable to handle kernel NULL pointer dereference at (null) [ 26.396369] IP: [] vlan_skb_recv+0x89/0x280 [8021q] vlan_dev_info() was used with original device, instead of skb->dev. Also spotted by Américo Wang. Reported-By: Bruno Prémont Tested-By: Bruno Prémont Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/8021q/vlan_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index b7889782047e..c1b92cab46c7 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -163,7 +163,7 @@ int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev, goto err_unlock; } - rx_stats = per_cpu_ptr(vlan_dev_info(dev)->vlan_rx_stats, + rx_stats = per_cpu_ptr(vlan_dev_info(skb->dev)->vlan_rx_stats, smp_processor_id()); rx_stats->rx_packets++; rx_stats->rx_bytes += skb->len; From 0eaddb28d3460f13102cd82cf58af875bfb1bd53 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Sat, 16 Jan 2010 16:05:04 +0100 Subject: [PATCH 1353/1626] drm/ttm: Allow system memory as a busy placement. This is needed to fix a vmwgfx memory usage bug. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 8036b6e189ee..1a3e909b7bba 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -943,6 +943,14 @@ int ttm_bo_mem_space(struct ttm_buffer_object *bo, ttm_flag_masked(&cur_flags, placement->busy_placement[i], ~TTM_PL_MASK_MEMTYPE); + + if (mem_type == TTM_PL_SYSTEM) { + mem->mem_type = mem_type; + mem->placement = cur_flags; + mem->mm_node = NULL; + return 0; + } + ret = ttm_bo_mem_force_space(bo, mem_type, placement, mem, interruptible, no_wait); if (ret == 0 && mem->mm_node) { From 8ba5152a3acd5914cade42a1c8c9dc58ad8d1a89 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Sat, 16 Jan 2010 16:05:05 +0100 Subject: [PATCH 1354/1626] drm/vmwgfx: Optimize memory footprint for DMA buffers. Use VRAM whenever there is free space for DMA buffers, but use system GMR memory if using VRAM would cause an eviction. This significantly reduces the guest system memory usage for VMs with a large amount of VRAM allocated. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c | 9 +++++++++ drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 1 + drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 19 +++++++++++++++++++ drivers/gpu/drm/vmwgfx/vmwgfx_resource.c | 2 +- 4 files changed, 30 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c b/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c index 37a81925b158..825ebe3d89d5 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c @@ -48,6 +48,15 @@ struct ttm_placement vmw_vram_placement = { .busy_placement = &vram_placement_flags }; +struct ttm_placement vmw_vram_sys_placement = { + .fpfn = 0, + .lpfn = 0, + .num_placement = 1, + .placement = &vram_placement_flags, + .num_busy_placement = 1, + .busy_placement = &sys_placement_flags +}; + struct ttm_placement vmw_vram_ne_placement = { .fpfn = 0, .lpfn = 0, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 7532b9b47eec..50529a7f06fb 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -404,6 +404,7 @@ extern int vmw_mmap(struct file *filp, struct vm_area_struct *vma); extern struct ttm_placement vmw_vram_placement; extern struct ttm_placement vmw_vram_ne_placement; +extern struct ttm_placement vmw_vram_sys_placement; extern struct ttm_placement vmw_sys_placement; extern struct ttm_bo_driver vmw_bo_driver; extern int vmw_dma_quiescent(struct drm_device *dev); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index 2e92da567403..d69caf92ffe7 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -487,6 +487,21 @@ static int vmw_validate_single_buffer(struct vmw_private *dev_priv, { int ret; + if (vmw_dmabuf_gmr(bo) != SVGA_GMR_NULL) + return 0; + + /** + * Put BO in VRAM, only if there is space. + */ + + ret = ttm_bo_validate(bo, &vmw_vram_sys_placement, true, false); + if (unlikely(ret == -ERESTARTSYS)) + return ret; + + /** + * Otherwise, set it up as GMR. + */ + if (vmw_dmabuf_gmr(bo) != SVGA_GMR_NULL) return 0; @@ -494,6 +509,10 @@ static int vmw_validate_single_buffer(struct vmw_private *dev_priv, if (likely(ret == 0 || ret == -ERESTARTSYS)) return ret; + /** + * If that failed, try VRAM again, this time evicting + * previous contents. + */ ret = ttm_bo_validate(bo, &vmw_vram_placement, true, false); return ret; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index e0878077e8aa..e01db120efff 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -872,7 +872,7 @@ int vmw_dmabuf_alloc_ioctl(struct drm_device *dev, void *data, } ret = vmw_dmabuf_init(dev_priv, &vmw_user_bo->dma, req->size, - &vmw_vram_placement, true, + &vmw_vram_sys_placement, true, &vmw_user_dmabuf_destroy); if (unlikely(ret != 0)) return ret; From d796d8446fe0ff4442c1a1d0b10c861f17ac8168 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 25 Jan 2010 13:08:08 +1000 Subject: [PATCH 1355/1626] drm/radeon/kms: make hibernate work on IGPs This is the least invasive fix without migrating the radeon driver to pm_ops from what I can see. We just always migrate VRAM objects on IGPs for now and we can fix it up later to migrate depending on STR vs STD. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_object.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 4e636de877b2..d72a71bff218 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -220,7 +220,8 @@ int radeon_bo_unpin(struct radeon_bo *bo) int radeon_bo_evict_vram(struct radeon_device *rdev) { - if (rdev->flags & RADEON_IS_IGP) { + /* late 2.6.33 fix IGP hibernate - we need pm ops to do this correct */ + if (0 && (rdev->flags & RADEON_IS_IGP)) { if (rdev->mc.igp_sideport_enabled == false) /* Useless to evict on IGP chips */ return 0; From 5fd4df4d475a7fee96fff54f6341192f547984e0 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 18 Jan 2010 16:47:04 +0800 Subject: [PATCH 1356/1626] drm: fix regression in fb blank handling commit 731b5a15a3b1474a41c2ca29b4c32b0f21bc852e Author: James Simmons Date: Thu Oct 29 20:39:07 2009 +0000 drm/kms: properly handle fbdev blanking uses DRM_MODE_DPMS_ON for FB_BLANK_NORMAL, but DRM_MODE_DPMS_ON is actually for turning output on instead of blank. This makes fb blank broken on my T61, it put LVDS on but leave pipe disabled which made screen totally white or caused some 'burning' effect. [airlied: James objects to this but at this point in 2.6.33, I can't see a patch that will fix this properly like he wants coming in time and otherwise this is a regression - proper fix for 2.6.34 hopefully.] Cc: James Simmons Signed-off-by: Zhenyu Wang Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 1c2b7d44ec05..0f9e90552dc4 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -389,7 +389,7 @@ int drm_fb_helper_blank(int blank, struct fb_info *info) break; /* Display: Off; HSync: On, VSync: On */ case FB_BLANK_NORMAL: - drm_fb_helper_off(info, DRM_MODE_DPMS_ON); + drm_fb_helper_off(info, DRM_MODE_DPMS_STANDBY); break; /* Display: Off; HSync: Off, VSync: On */ case FB_BLANK_HSYNC_SUSPEND: From f2ab3a13d2cbe19426c27c35a014c98212e914a5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 25 Jan 2010 16:13:12 +1000 Subject: [PATCH 1357/1626] drm/radeon/kms: drop unnecessary printks. These printks aren't required anymore. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index e619aca5423f..af464e351fbd 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -307,7 +307,6 @@ atombios_set_crtc_dtd_timing(struct drm_crtc *crtc, args.susModeMiscInfo.usAccess = cpu_to_le16(misc); args.ucCRTC = radeon_crtc->crtc_id; - printk("executing set crtc dtd timing\n"); atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } @@ -347,7 +346,6 @@ static void atombios_crtc_set_timing(struct drm_crtc *crtc, args.susModeMiscInfo.usAccess = cpu_to_le16(misc); args.ucCRTC = radeon_crtc->crtc_id; - printk("executing set crtc timing\n"); atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } From 7087e16286913b41ba9a5186360645b57b8508dd Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 25 Jan 2010 16:13:55 +1000 Subject: [PATCH 1358/1626] drm/radeon/kms: preface warning printk with driver name This just adds a little more info to the warning for old -ati/mesa userspaces. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 9cc4ba8d03d5..e4c45ec16507 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -562,7 +562,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, return -EINVAL; } ib[idx+1+i] = track->cb_color0_base_last; - printk_once(KERN_WARNING "You have old & broken userspace " + printk_once(KERN_WARNING "radeon: You have old & broken userspace " "please consider updating mesa & xf86-video-ati\n"); } else { r = r600_cs_packet_next_reloc(p, &reloc); From a40ccc6868943e74ec12f26a266ce1d0373b2b32 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Sun, 24 Jan 2010 18:46:06 +0000 Subject: [PATCH 1359/1626] sky2: revert config space change Obviously, this register had some other impact that is causing the regression. Either it is masking some other access or needs to be reset in some path. Either, way it is best to just revert the change for 2.6.33 This reverts commit 166a0fd4c788ec7f10ca8194ec6d526afa12db75. Signed-off-by: David S. Miller --- drivers/net/sky2.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 02d0b42e436c..d760650c5c04 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -644,6 +644,7 @@ static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port) { u32 reg1; + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); reg1 &= ~phy_power[port]; @@ -651,6 +652,7 @@ static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port) reg1 |= coma_mode[port]; sky2_pci_write32(hw, PCI_DEV_REG1, reg1); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); sky2_pci_read32(hw, PCI_DEV_REG1); if (hw->chip_id == CHIP_ID_YUKON_FE) @@ -707,9 +709,11 @@ static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port) gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN); } + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */ sky2_pci_write32(hw, PCI_DEV_REG1, reg1); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } /* Force a renegotiation */ @@ -2149,7 +2153,9 @@ static void sky2_qlink_intr(struct sky2_hw *hw) /* reset PHY Link Detect */ phy = sky2_pci_read16(hw, PSM_CONFIG_REG4); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); sky2_link_up(sky2); } @@ -2640,6 +2646,7 @@ static void sky2_hw_intr(struct sky2_hw *hw) if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) { u16 pci_err; + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); pci_err = sky2_pci_read16(hw, PCI_STATUS); if (net_ratelimit()) dev_err(&pdev->dev, "PCI hardware error (0x%x)\n", @@ -2647,12 +2654,14 @@ static void sky2_hw_intr(struct sky2_hw *hw) sky2_pci_write16(hw, PCI_STATUS, pci_err | PCI_STATUS_ERROR_BITS); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } if (status & Y2_IS_PCI_EXP) { /* PCI-Express uncorrectable Error occurred */ u32 err; + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS); sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS, 0xfffffffful); @@ -2660,6 +2669,7 @@ static void sky2_hw_intr(struct sky2_hw *hw) dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err); sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } if (status & Y2_HWE_L1_MASK) @@ -3038,6 +3048,7 @@ static void sky2_reset(struct sky2_hw *hw) } sky2_power_on(hw); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); for (i = 0; i < hw->ports; i++) { sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); @@ -3074,6 +3085,7 @@ static void sky2_reset(struct sky2_hw *hw) reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE; /* reset PHY Link Detect */ + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); sky2_pci_write16(hw, PSM_CONFIG_REG4, reg | PSM_CONFIG_REG4_RST_PHY_LINK_DETECT); sky2_pci_write16(hw, PSM_CONFIG_REG4, reg); @@ -3091,6 +3103,7 @@ static void sky2_reset(struct sky2_hw *hw) /* restore the PCIe Link Control register */ sky2_pci_write16(hw, cap + PCI_EXP_LNKCTL, reg); } + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); /* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */ sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16)); From d7c7544c3d5f59033d1bf3236bc7b289f5f26b75 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sun, 24 Jan 2010 22:47:53 -0800 Subject: [PATCH 1360/1626] netns xfrm: deal with dst entries in netns GC is non-existent in netns, so after you hit GC threshold, no new dst entries will be created until someone triggers cleanup in init_net. Make xfrm4_dst_ops and xfrm6_dst_ops per-netns. This is not done in a generic way, because it woule waste (AF_MAX - 2) * sizeof(struct dst_ops) bytes per-netns. Reorder GC threshold initialization so it'd be done before registering XFRM policies. Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- include/net/netns/xfrm.h | 6 ++++ net/ipv4/xfrm4_policy.c | 14 ++++++---- net/ipv6/xfrm6_policy.c | 25 +++++++++-------- net/xfrm/xfrm_policy.c | 59 ++++++++++++++++++++++++++++++++++++++-- 4 files changed, 84 insertions(+), 20 deletions(-) diff --git a/include/net/netns/xfrm.h b/include/net/netns/xfrm.h index 56f8e5585df7..74f119a2829a 100644 --- a/include/net/netns/xfrm.h +++ b/include/net/netns/xfrm.h @@ -5,6 +5,7 @@ #include #include #include +#include struct ctl_table_header; @@ -42,6 +43,11 @@ struct netns_xfrm { unsigned int policy_count[XFRM_POLICY_MAX * 2]; struct work_struct policy_hash_work; + struct dst_ops xfrm4_dst_ops; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + struct dst_ops xfrm6_dst_ops; +#endif + struct sock *nlsk; struct sock *nlsk_stash; diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c index 8c08a28d8f83..67107d63c1cd 100644 --- a/net/ipv4/xfrm4_policy.c +++ b/net/ipv4/xfrm4_policy.c @@ -15,7 +15,6 @@ #include #include -static struct dst_ops xfrm4_dst_ops; static struct xfrm_policy_afinfo xfrm4_policy_afinfo; static struct dst_entry *xfrm4_dst_lookup(struct net *net, int tos, @@ -190,8 +189,10 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse) static inline int xfrm4_garbage_collect(struct dst_ops *ops) { - xfrm4_policy_afinfo.garbage_collect(&init_net); - return (atomic_read(&xfrm4_dst_ops.entries) > xfrm4_dst_ops.gc_thresh*2); + struct net *net = container_of(ops, struct net, xfrm.xfrm4_dst_ops); + + xfrm4_policy_afinfo.garbage_collect(net); + return (atomic_read(&ops->entries) > ops->gc_thresh * 2); } static void xfrm4_update_pmtu(struct dst_entry *dst, u32 mtu) @@ -268,7 +269,7 @@ static struct xfrm_policy_afinfo xfrm4_policy_afinfo = { static struct ctl_table xfrm4_policy_table[] = { { .procname = "xfrm4_gc_thresh", - .data = &xfrm4_dst_ops.gc_thresh, + .data = &init_net.xfrm.xfrm4_dst_ops.gc_thresh, .maxlen = sizeof(int), .mode = 0644, .proc_handler = proc_dointvec, @@ -295,8 +296,6 @@ static void __exit xfrm4_policy_fini(void) void __init xfrm4_init(int rt_max_size) { - xfrm4_state_init(); - xfrm4_policy_init(); /* * Select a default value for the gc_thresh based on the main route * table hash size. It seems to me the worst case scenario is when @@ -308,6 +307,9 @@ void __init xfrm4_init(int rt_max_size) * and start cleaning when were 1/2 full */ xfrm4_dst_ops.gc_thresh = rt_max_size/2; + + xfrm4_state_init(); + xfrm4_policy_init(); #ifdef CONFIG_SYSCTL sysctl_hdr = register_net_sysctl_table(&init_net, net_ipv4_ctl_path, xfrm4_policy_table); diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c index 7254e3f899a7..dbdc696f5fc5 100644 --- a/net/ipv6/xfrm6_policy.c +++ b/net/ipv6/xfrm6_policy.c @@ -24,7 +24,6 @@ #include #endif -static struct dst_ops xfrm6_dst_ops; static struct xfrm_policy_afinfo xfrm6_policy_afinfo; static struct dst_entry *xfrm6_dst_lookup(struct net *net, int tos, @@ -224,8 +223,10 @@ _decode_session6(struct sk_buff *skb, struct flowi *fl, int reverse) static inline int xfrm6_garbage_collect(struct dst_ops *ops) { - xfrm6_policy_afinfo.garbage_collect(&init_net); - return (atomic_read(&xfrm6_dst_ops.entries) > xfrm6_dst_ops.gc_thresh*2); + struct net *net = container_of(ops, struct net, xfrm.xfrm6_dst_ops); + + xfrm6_policy_afinfo.garbage_collect(net); + return (atomic_read(&ops->entries) > ops->gc_thresh * 2); } static void xfrm6_update_pmtu(struct dst_entry *dst, u32 mtu) @@ -310,7 +311,7 @@ static void xfrm6_policy_fini(void) static struct ctl_table xfrm6_policy_table[] = { { .procname = "xfrm6_gc_thresh", - .data = &xfrm6_dst_ops.gc_thresh, + .data = &init_net.xfrm.xfrm6_dst_ops.gc_thresh, .maxlen = sizeof(int), .mode = 0644, .proc_handler = proc_dointvec, @@ -326,13 +327,6 @@ int __init xfrm6_init(void) int ret; unsigned int gc_thresh; - ret = xfrm6_policy_init(); - if (ret) - goto out; - - ret = xfrm6_state_init(); - if (ret) - goto out_policy; /* * We need a good default value for the xfrm6 gc threshold. * In ipv4 we set it to the route hash table size * 8, which @@ -346,6 +340,15 @@ int __init xfrm6_init(void) */ gc_thresh = FIB6_TABLE_HASHSZ * 8; xfrm6_dst_ops.gc_thresh = (gc_thresh < 1024) ? 1024 : gc_thresh; + + ret = xfrm6_policy_init(); + if (ret) + goto out; + + ret = xfrm6_state_init(); + if (ret) + goto out_policy; + #ifdef CONFIG_SYSCTL sysctl_hdr = register_net_sysctl_table(&init_net, net_ipv6_ctl_path, xfrm6_policy_table); diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index d2c8cb57ee4c..0ecb16a9a883 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1309,15 +1309,28 @@ static inline int xfrm_get_tos(struct flowi *fl, int family) return tos; } -static inline struct xfrm_dst *xfrm_alloc_dst(int family) +static inline struct xfrm_dst *xfrm_alloc_dst(struct net *net, int family) { struct xfrm_policy_afinfo *afinfo = xfrm_policy_get_afinfo(family); + struct dst_ops *dst_ops; struct xfrm_dst *xdst; if (!afinfo) return ERR_PTR(-EINVAL); - xdst = dst_alloc(afinfo->dst_ops) ?: ERR_PTR(-ENOBUFS); + switch (family) { + case AF_INET: + dst_ops = &net->xfrm.xfrm4_dst_ops; + break; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + case AF_INET6: + dst_ops = &net->xfrm.xfrm6_dst_ops; + break; +#endif + default: + BUG(); + } + xdst = dst_alloc(dst_ops) ?: ERR_PTR(-ENOBUFS); xfrm_policy_put_afinfo(afinfo); @@ -1366,6 +1379,7 @@ static struct dst_entry *xfrm_bundle_create(struct xfrm_policy *policy, struct flowi *fl, struct dst_entry *dst) { + struct net *net = xp_net(policy); unsigned long now = jiffies; struct net_device *dev; struct dst_entry *dst_prev = NULL; @@ -1389,7 +1403,7 @@ static struct dst_entry *xfrm_bundle_create(struct xfrm_policy *policy, dst_hold(dst); for (; i < nx; i++) { - struct xfrm_dst *xdst = xfrm_alloc_dst(family); + struct xfrm_dst *xdst = xfrm_alloc_dst(net, family); struct dst_entry *dst1 = &xdst->u.dst; err = PTR_ERR(xdst); @@ -2279,6 +2293,7 @@ EXPORT_SYMBOL(xfrm_bundle_ok); int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo) { + struct net *net; int err = 0; if (unlikely(afinfo == NULL)) return -EINVAL; @@ -2302,6 +2317,27 @@ int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo) xfrm_policy_afinfo[afinfo->family] = afinfo; } write_unlock_bh(&xfrm_policy_afinfo_lock); + + rtnl_lock(); + for_each_net(net) { + struct dst_ops *xfrm_dst_ops; + + switch (afinfo->family) { + case AF_INET: + xfrm_dst_ops = &net->xfrm.xfrm4_dst_ops; + break; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + case AF_INET6: + xfrm_dst_ops = &net->xfrm.xfrm6_dst_ops; + break; +#endif + default: + BUG(); + } + *xfrm_dst_ops = *afinfo->dst_ops; + } + rtnl_unlock(); + return err; } EXPORT_SYMBOL(xfrm_policy_register_afinfo); @@ -2332,6 +2368,22 @@ int xfrm_policy_unregister_afinfo(struct xfrm_policy_afinfo *afinfo) } EXPORT_SYMBOL(xfrm_policy_unregister_afinfo); +static void __net_init xfrm_dst_ops_init(struct net *net) +{ + struct xfrm_policy_afinfo *afinfo; + + read_lock_bh(&xfrm_policy_afinfo_lock); + afinfo = xfrm_policy_afinfo[AF_INET]; + if (afinfo) + net->xfrm.xfrm4_dst_ops = *afinfo->dst_ops; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + afinfo = xfrm_policy_afinfo[AF_INET6]; + if (afinfo) + net->xfrm.xfrm6_dst_ops = *afinfo->dst_ops; +#endif + read_unlock_bh(&xfrm_policy_afinfo_lock); +} + static struct xfrm_policy_afinfo *xfrm_policy_get_afinfo(unsigned short family) { struct xfrm_policy_afinfo *afinfo; @@ -2494,6 +2546,7 @@ static int __net_init xfrm_net_init(struct net *net) rv = xfrm_policy_init(net); if (rv < 0) goto out_policy; + xfrm_dst_ops_init(net); rv = xfrm_sysctl_init(net); if (rv < 0) goto out_sysctl; From 973b8cb0ead3e0b1dd3ee7b2df52e4dff1ffc707 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C5=81ukasz=20Wojni=C5=82owicz?= Date: Sun, 24 Jan 2010 14:12:37 +0100 Subject: [PATCH 1361/1626] ALSA: hda - add possibility to choose speakers configuration for 4930g MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now one can choose speaker configuration in e.g. PulseAudio mixer Signed-off-by: Łukasz Wojniłowicz Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d00e6d1da085..da34095c707f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9478,6 +9478,7 @@ static struct alc_config_preset alc882_presets[] = { .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes), .channel_mode = alc883_3ST_6ch_modes, .need_dac_fix = 1, + .const_channel_count = 6, .num_mux_defs = ARRAY_SIZE(alc888_2_capture_sources), .input_mux = alc888_2_capture_sources, From a00d643a2a841e76dfb76ec4f8a1e71844252974 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Mon, 25 Jan 2010 15:00:48 +0100 Subject: [PATCH 1362/1626] hwmon: (smsc47m1) Fix section mismatch smsc47m1_restore is called from sm_smsc47m1_exit, which is an __exit function, so it can't be __init. Signed-off-by: Jeff Mahoney Signed-off-by: Jean Delvare --- drivers/hwmon/smsc47m1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index 9ca97818bd4b..8fa462f2b570 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -488,7 +488,7 @@ static int __init smsc47m1_find(unsigned short *addr, } /* Restore device to its initial state */ -static void __init smsc47m1_restore(const struct smsc47m1_sio_data *sio_data) +static void smsc47m1_restore(const struct smsc47m1_sio_data *sio_data) { if ((sio_data->activate & 0x01) == 0) { superio_enter(); From 316e2664dcc82e9c5f73360a4fb8f9279a8152ed Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 25 Jan 2010 15:00:49 +0100 Subject: [PATCH 1363/1626] hwmon: (amc6821) Double unlock bug The mutex gets unlocked after we goto EXIT. Signed-off-by: Dan Carpenter Signed-off-by: Jean Delvare --- drivers/hwmon/amc6821.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c index 1c89d922d619..fa9708c2d723 100644 --- a/drivers/hwmon/amc6821.c +++ b/drivers/hwmon/amc6821.c @@ -686,7 +686,6 @@ static ssize_t set_fan1_div( data->fan1_div = 4; break; default: - mutex_unlock(&data->update_lock); count = -EINVAL; goto EXIT; } From 5542482b9c61c2588f1178f315310a794988051a Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Mon, 25 Jan 2010 15:00:49 +0100 Subject: [PATCH 1364/1626] hwmon: (asus_atk0110) Do not fail if MBIF is missing MBIF (motherboard identification) is only used to print the name of the board, it's not essential for the driver; do not fail if it's missing. Based on Juan's patch. Signed-off-by: Luca Tettamanti Acked-by: Juan RP Signed-off-by: Jean Delvare --- drivers/hwmon/asus_atk0110.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index 6811346c1c62..028284f544e3 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -1329,18 +1329,17 @@ static int atk_add(struct acpi_device *device) &buf, ACPI_TYPE_PACKAGE); if (ret != AE_OK) { dev_dbg(&device->dev, "atk: method MBIF not found\n"); - err = -ENODEV; - goto out; + } else { + obj = buf.pointer; + if (obj->package.count >= 2) { + union acpi_object *id = &obj->package.elements[1]; + if (id->type == ACPI_TYPE_STRING) + dev_dbg(&device->dev, "board ID = %s\n", + id->string.pointer); + } + ACPI_FREE(buf.pointer); } - obj = buf.pointer; - if (obj->package.count >= 2 && - obj->package.elements[1].type == ACPI_TYPE_STRING) { - dev_dbg(&device->dev, "board ID = %s\n", - obj->package.elements[1].string.pointer); - } - ACPI_FREE(buf.pointer); - err = atk_probe_if(data); if (err) { dev_err(&device->dev, "No usable hwmon interface detected\n"); From c453615f77aa51593c1c9c9031b4278797d3fd19 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 25 Jan 2010 15:00:50 +0100 Subject: [PATCH 1365/1626] hwmon: (fschmd) Fix a memleak on multiple opens of /dev/watchdog When /dev/watchdog gets opened a second time we return -EBUSY, but we already have got a kref then, so we end up leaking our data struct. Signed-off-by: Hans de Goede Signed-off-by: Jean Delvare Cc: stable@kernel.org --- drivers/hwmon/fschmd.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index bd0fc67e804b..fa0728232e71 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -768,6 +768,7 @@ leave: static int watchdog_open(struct inode *inode, struct file *filp) { struct fschmd_data *pos, *data = NULL; + int watchdog_is_open; /* We get called from drivers/char/misc.c with misc_mtx hold, and we call misc_register() from fschmd_probe() with watchdog_data_mutex @@ -782,10 +783,12 @@ static int watchdog_open(struct inode *inode, struct file *filp) } } /* Note we can never not have found data, so we don't check for this */ - kref_get(&data->kref); + watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open); + if (!watchdog_is_open) + kref_get(&data->kref); mutex_unlock(&watchdog_data_mutex); - if (test_and_set_bit(0, &data->watchdog_is_open)) + if (watchdog_is_open) return -EBUSY; /* Start the watchdog */ From a5d36f82c4f3e852b61fdf1fee13463c8aa91b90 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 29 Dec 2009 12:42:16 +0200 Subject: [PATCH 1366/1626] KVM: Fix race between APIC TMR and IRR When we queue an interrupt to the local apic, we set the IRR before the TMR. The vcpu can pick up the IRR and inject the interrupt before setting the TMR, and perhaps even EOI it, causing incorrect behaviour. The race is really insignificant since it can only occur on the first interrupt (usually following interrupts will not change TMR), but it's better closed than open. Fixed by reordering setting the TMR vs IRR. Cc: stable@kernel.org Signed-off-by: Avi Kivity Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/lapic.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 3063a0c4858b..ba8c045da782 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -373,6 +373,12 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode, if (unlikely(!apic_enabled(apic))) break; + if (trig_mode) { + apic_debug("level trig mode for vector %d", vector); + apic_set_vector(vector, apic->regs + APIC_TMR); + } else + apic_clear_vector(vector, apic->regs + APIC_TMR); + result = !apic_test_and_set_irr(vector, apic); trace_kvm_apic_accept_irq(vcpu->vcpu_id, delivery_mode, trig_mode, vector, !result); @@ -383,11 +389,6 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode, break; } - if (trig_mode) { - apic_debug("level trig mode for vector %d", vector); - apic_set_vector(vector, apic->regs + APIC_TMR); - } else - apic_clear_vector(vector, apic->regs + APIC_TMR); kvm_vcpu_kick(vcpu); break; From e1f829b6f453c7985cfdfab616994b4051c3d788 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Sun, 20 Dec 2009 22:24:06 +0100 Subject: [PATCH 1367/1626] KVM: powerpc: Show timing option only on embedded Embedded PowerPC KVM has an exit timing implementation to track and evaluate how much time was spent in which exit path. For Book3S, we don't implement it. So let's not expose it as a config option either. Signed-off-by: Alexander Graf Signed-off-by: Avi Kivity --- arch/powerpc/kvm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig index 07703f72330e..6fb6e8aa3890 100644 --- a/arch/powerpc/kvm/Kconfig +++ b/arch/powerpc/kvm/Kconfig @@ -53,7 +53,7 @@ config KVM_440 config KVM_EXIT_TIMING bool "Detailed exit timing" - depends on KVM + depends on KVM_440 || KVM_E500 ---help--- Calculate elapsed time for every exit/enter cycle. A per-vcpu report is available in debugfs kvm/vm#_vcpu#_timing. From 82b7005f0e72d8d1a8226e4c192cbb0850d10b3f Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Tue, 5 Jan 2010 19:02:28 +0800 Subject: [PATCH 1368/1626] KVM: x86: Fix host_mapping_level() When found a error hva, should not return PAGE_SIZE but the level... Also clean up the coding style of the following loop. Cc: stable@kernel.org Signed-off-by: Sheng Yang Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/mmu.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 4c3e5b2314cb..89a49fb46a27 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -477,7 +477,7 @@ static int host_mapping_level(struct kvm *kvm, gfn_t gfn) addr = gfn_to_hva(kvm, gfn); if (kvm_is_error_hva(addr)) - return page_size; + return PT_PAGE_TABLE_LEVEL; down_read(¤t->mm->mmap_sem); vma = find_vma(current->mm, addr); @@ -515,11 +515,9 @@ static int mapping_level(struct kvm_vcpu *vcpu, gfn_t large_gfn) if (host_level == PT_PAGE_TABLE_LEVEL) return host_level; - for (level = PT_DIRECTORY_LEVEL; level <= host_level; ++level) { - + for (level = PT_DIRECTORY_LEVEL; level <= host_level; ++level) if (has_wrprotected_page(vcpu->kvm, large_gfn, level)) break; - } return level - 1; } From f1d1c309f35e9b0fb961cffd70fbd04f450ec47c Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Wed, 13 Jan 2010 18:58:09 +0200 Subject: [PATCH 1369/1626] KVM: only allow one gsi per fd Looks like repeatedly binding same fd to multiple gsi's with irqfd can use up a ton of kernel memory for irqfd structures. A simple fix is to allow each fd to only trigger one gsi: triggering a storm of interrupts in guest is likely useless anyway, and we can do it by binding a single gsi to many interrupts if we really want to. Cc: stable@kernel.org Signed-off-by: Michael S. Tsirkin Acked-by: Acked-by: Gregory Haskins Signed-off-by: Avi Kivity --- virt/kvm/eventfd.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c index 30f70fd511c4..62e4cd947a90 100644 --- a/virt/kvm/eventfd.c +++ b/virt/kvm/eventfd.c @@ -166,7 +166,7 @@ irqfd_ptable_queue_proc(struct file *file, wait_queue_head_t *wqh, static int kvm_irqfd_assign(struct kvm *kvm, int fd, int gsi) { - struct _irqfd *irqfd; + struct _irqfd *irqfd, *tmp; struct file *file = NULL; struct eventfd_ctx *eventfd = NULL; int ret; @@ -203,9 +203,20 @@ kvm_irqfd_assign(struct kvm *kvm, int fd, int gsi) init_waitqueue_func_entry(&irqfd->wait, irqfd_wakeup); init_poll_funcptr(&irqfd->pt, irqfd_ptable_queue_proc); + spin_lock_irq(&kvm->irqfds.lock); + + ret = 0; + list_for_each_entry(tmp, &kvm->irqfds.items, list) { + if (irqfd->eventfd != tmp->eventfd) + continue; + /* This fd is used for another irq already. */ + ret = -EBUSY; + spin_unlock_irq(&kvm->irqfds.lock); + goto fail; + } + events = file->f_op->poll(file, &irqfd->pt); - spin_lock_irq(&kvm->irqfds.lock); list_add_tail(&irqfd->list, &kvm->irqfds.items); spin_unlock_irq(&kvm->irqfds.lock); From d72118cecabbb76b96b77107a50c74d1bb36c0c1 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Tue, 12 Jan 2010 16:42:09 -0200 Subject: [PATCH 1370/1626] KVM: properly check max PIC pin in irq route setup Otherwise memory beyond irq_states[16] might be accessed. Noticed by Juan Quintela. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti Acked-by: Juan Quintela Signed-off-by: Avi Kivity --- virt/kvm/irq_comm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/virt/kvm/irq_comm.c b/virt/kvm/irq_comm.c index 9b077342ab54..9fd5b3ebc517 100644 --- a/virt/kvm/irq_comm.c +++ b/virt/kvm/irq_comm.c @@ -302,6 +302,7 @@ static int setup_routing_entry(struct kvm_irq_routing_table *rt, { int r = -EINVAL; int delta; + unsigned max_pin; struct kvm_kernel_irq_routing_entry *ei; struct hlist_node *n; @@ -322,12 +323,15 @@ static int setup_routing_entry(struct kvm_irq_routing_table *rt, switch (ue->u.irqchip.irqchip) { case KVM_IRQCHIP_PIC_MASTER: e->set = kvm_set_pic_irq; + max_pin = 16; break; case KVM_IRQCHIP_PIC_SLAVE: e->set = kvm_set_pic_irq; + max_pin = 16; delta = 8; break; case KVM_IRQCHIP_IOAPIC: + max_pin = KVM_IOAPIC_NUM_PINS; e->set = kvm_set_ioapic_irq; break; default: @@ -335,7 +339,7 @@ static int setup_routing_entry(struct kvm_irq_routing_table *rt, } e->irqchip.irqchip = ue->u.irqchip.irqchip; e->irqchip.pin = ue->u.irqchip.pin + delta; - if (e->irqchip.pin >= KVM_IOAPIC_NUM_PINS) + if (e->irqchip.pin >= max_pin) goto out; rt->chip[ue->u.irqchip.irqchip][e->irqchip.pin] = ue->gsi; break; From a6085fbaf65ab09bfb5ec8d902d6d21680fe1895 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Thu, 14 Jan 2010 17:41:27 -0200 Subject: [PATCH 1371/1626] KVM: MMU: bail out pagewalk on kvm_read_guest error Exit the guest pagetable walk loop if reading gpte failed. Otherwise its possible to enter an endless loop processing the previous present pte. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/paging_tmpl.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index 58a0f1e88596..ede2131a9225 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -150,7 +150,9 @@ walk: walker->table_gfn[walker->level - 1] = table_gfn; walker->pte_gpa[walker->level - 1] = pte_gpa; - kvm_read_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte)); + if (kvm_read_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte))) + goto not_present; + trace_kvm_mmu_paging_element(pte, walker->level); if (!is_present_gpte(pte)) From cb289d6244a37cf932c571d6deb0daa8030f931b Mon Sep 17 00:00:00 2001 From: Davide Libenzi Date: Wed, 13 Jan 2010 09:34:36 -0800 Subject: [PATCH 1372/1626] eventfd - allow atomic read and waitqueue remove KVM needs a wait to atomically remove themselves from the eventfd ->poll() wait queue head, in order to handle correctly their IRQfd deassign operation. This patch introduces such API, plus a way to read an eventfd from its context. Signed-off-by: Davide Libenzi Signed-off-by: Avi Kivity --- fs/eventfd.c | 89 ++++++++++++++++++++++++++++++++++------- include/linux/eventfd.h | 16 ++++++++ 2 files changed, 90 insertions(+), 15 deletions(-) diff --git a/fs/eventfd.c b/fs/eventfd.c index d26402ff06ea..7758cc382ef0 100644 --- a/fs/eventfd.c +++ b/fs/eventfd.c @@ -135,26 +135,71 @@ static unsigned int eventfd_poll(struct file *file, poll_table *wait) return events; } -static ssize_t eventfd_read(struct file *file, char __user *buf, size_t count, - loff_t *ppos) +static void eventfd_ctx_do_read(struct eventfd_ctx *ctx, __u64 *cnt) +{ + *cnt = (ctx->flags & EFD_SEMAPHORE) ? 1 : ctx->count; + ctx->count -= *cnt; +} + +/** + * eventfd_ctx_remove_wait_queue - Read the current counter and removes wait queue. + * @ctx: [in] Pointer to eventfd context. + * @wait: [in] Wait queue to be removed. + * @cnt: [out] Pointer to the 64bit conter value. + * + * Returns zero if successful, or the following error codes: + * + * -EAGAIN : The operation would have blocked. + * + * This is used to atomically remove a wait queue entry from the eventfd wait + * queue head, and read/reset the counter value. + */ +int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, wait_queue_t *wait, + __u64 *cnt) +{ + unsigned long flags; + + spin_lock_irqsave(&ctx->wqh.lock, flags); + eventfd_ctx_do_read(ctx, cnt); + __remove_wait_queue(&ctx->wqh, wait); + if (*cnt != 0 && waitqueue_active(&ctx->wqh)) + wake_up_locked_poll(&ctx->wqh, POLLOUT); + spin_unlock_irqrestore(&ctx->wqh.lock, flags); + + return *cnt != 0 ? 0 : -EAGAIN; +} +EXPORT_SYMBOL_GPL(eventfd_ctx_remove_wait_queue); + +/** + * eventfd_ctx_read - Reads the eventfd counter or wait if it is zero. + * @ctx: [in] Pointer to eventfd context. + * @no_wait: [in] Different from zero if the operation should not block. + * @cnt: [out] Pointer to the 64bit conter value. + * + * Returns zero if successful, or the following error codes: + * + * -EAGAIN : The operation would have blocked but @no_wait was nonzero. + * -ERESTARTSYS : A signal interrupted the wait operation. + * + * If @no_wait is zero, the function might sleep until the eventfd internal + * counter becomes greater than zero. + */ +ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait, __u64 *cnt) { - struct eventfd_ctx *ctx = file->private_data; ssize_t res; - __u64 ucnt = 0; DECLARE_WAITQUEUE(wait, current); - if (count < sizeof(ucnt)) - return -EINVAL; spin_lock_irq(&ctx->wqh.lock); + *cnt = 0; res = -EAGAIN; if (ctx->count > 0) - res = sizeof(ucnt); - else if (!(file->f_flags & O_NONBLOCK)) { + res = 0; + else if (!no_wait) { __add_wait_queue(&ctx->wqh, &wait); - for (res = 0;;) { + for (;;) { set_current_state(TASK_INTERRUPTIBLE); if (ctx->count > 0) { - res = sizeof(ucnt); + res = 0; break; } if (signal_pending(current)) { @@ -168,18 +213,32 @@ static ssize_t eventfd_read(struct file *file, char __user *buf, size_t count, __remove_wait_queue(&ctx->wqh, &wait); __set_current_state(TASK_RUNNING); } - if (likely(res > 0)) { - ucnt = (ctx->flags & EFD_SEMAPHORE) ? 1 : ctx->count; - ctx->count -= ucnt; + if (likely(res == 0)) { + eventfd_ctx_do_read(ctx, cnt); if (waitqueue_active(&ctx->wqh)) wake_up_locked_poll(&ctx->wqh, POLLOUT); } spin_unlock_irq(&ctx->wqh.lock); - if (res > 0 && put_user(ucnt, (__u64 __user *) buf)) - return -EFAULT; return res; } +EXPORT_SYMBOL_GPL(eventfd_ctx_read); + +static ssize_t eventfd_read(struct file *file, char __user *buf, size_t count, + loff_t *ppos) +{ + struct eventfd_ctx *ctx = file->private_data; + ssize_t res; + __u64 cnt; + + if (count < sizeof(cnt)) + return -EINVAL; + res = eventfd_ctx_read(ctx, file->f_flags & O_NONBLOCK, &cnt); + if (res < 0) + return res; + + return put_user(cnt, (__u64 __user *) buf) ? -EFAULT : sizeof(cnt); +} static ssize_t eventfd_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h index 94dd10366a78..91bb4f27238c 100644 --- a/include/linux/eventfd.h +++ b/include/linux/eventfd.h @@ -10,6 +10,7 @@ #include #include +#include /* * CAREFUL: Check include/asm-generic/fcntl.h when defining @@ -34,6 +35,9 @@ struct file *eventfd_fget(int fd); struct eventfd_ctx *eventfd_ctx_fdget(int fd); struct eventfd_ctx *eventfd_ctx_fileget(struct file *file); int eventfd_signal(struct eventfd_ctx *ctx, int n); +ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait, __u64 *cnt); +int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, wait_queue_t *wait, + __u64 *cnt); #else /* CONFIG_EVENTFD */ @@ -61,6 +65,18 @@ static inline void eventfd_ctx_put(struct eventfd_ctx *ctx) } +static inline ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait, + __u64 *cnt) +{ + return -ENOSYS; +} + +static inline int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, + wait_queue_t *wait, __u64 *cnt) +{ + return -ENOSYS; +} + #endif #endif /* _LINUX_EVENTFD_H */ From b6a114d27273c37cd0107b0f49af208168498f05 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Wed, 13 Jan 2010 19:12:30 +0200 Subject: [PATCH 1373/1626] KVM: fix spurious interrupt with irqfd kvm didn't clear irqfd counter on deassign, as a result we could get a spurious interrupt when irqfd is assigned back. this leads to poor performance and, in theory, guest crash. Signed-off-by: Michael S. Tsirkin Signed-off-by: Avi Kivity --- virt/kvm/eventfd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c index 62e4cd947a90..a9d3fc6c681c 100644 --- a/virt/kvm/eventfd.c +++ b/virt/kvm/eventfd.c @@ -72,12 +72,13 @@ static void irqfd_shutdown(struct work_struct *work) { struct _irqfd *irqfd = container_of(work, struct _irqfd, shutdown); + u64 cnt; /* * Synchronize with the wait-queue and unhook ourselves to prevent * further events. */ - remove_wait_queue(irqfd->wqh, &irqfd->wait); + eventfd_ctx_remove_wait_queue(irqfd->eventfd, &irqfd->wait, &cnt); /* * We know no new events will be scheduled at this point, so block From 062d5e9b0d714f449b261bb522eadaaf6f00f438 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 21 Jan 2010 12:19:07 +0100 Subject: [PATCH 1374/1626] KVM: S390: fix potential array overrun in intercept handling kvm_handle_sie_intercept uses a jump table to get the intercept handler for a SIE intercept. Static code analysis revealed a potential problem: the intercept_funcs jump table was defined to contain (0x48 >> 2) entries, but we only checked for code > 0x48 which would cause an off-by-one array overflow if code == 0x48. Use the compiler and ARRAY_SIZE to automatically set the limits. Cc: stable@kernel.org Signed-off-by: Christian Borntraeger Signed-off-by: Marcelo Tosatti --- arch/s390/kvm/intercept.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c index ba9d8a7bc1ac..b40096494e46 100644 --- a/arch/s390/kvm/intercept.c +++ b/arch/s390/kvm/intercept.c @@ -213,7 +213,7 @@ static int handle_instruction_and_prog(struct kvm_vcpu *vcpu) return rc2; } -static const intercept_handler_t intercept_funcs[0x48 >> 2] = { +static const intercept_handler_t intercept_funcs[] = { [0x00 >> 2] = handle_noop, [0x04 >> 2] = handle_instruction, [0x08 >> 2] = handle_prog, @@ -230,7 +230,7 @@ int kvm_handle_sie_intercept(struct kvm_vcpu *vcpu) intercept_handler_t func; u8 code = vcpu->arch.sie_block->icptcode; - if (code & 3 || code > 0x48) + if (code & 3 || (code >> 2) >= ARRAY_SIZE(intercept_funcs)) return -ENOTSUPP; func = intercept_funcs[code >> 2]; if (func) From 36cb93fd6b6bf7e9163a69a8bf20207aed5fea44 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 22 Jan 2010 14:18:47 +0800 Subject: [PATCH 1375/1626] KVM: x86: Fix probable memory leak of vcpu->arch.mce_banks vcpu->arch.mce_banks is malloc in kvm_arch_vcpu_init(), but never free in any place, this may cause memory leak. So this patch fixed to free it in kvm_arch_vcpu_uninit(). Cc: stable@kernel.org Signed-off-by: Wei Yongjun Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/x86.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 6651dbf58675..b265eecc741f 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -5088,6 +5088,7 @@ fail: void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) { + kfree(vcpu->arch.mce_banks); kvm_free_lapic(vcpu); down_read(&vcpu->kvm->slots_lock); kvm_mmu_destroy(vcpu); From 443c39bc9ef7d8f648408d74c97e943f3bb3f48a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 22 Jan 2010 14:21:29 +0800 Subject: [PATCH 1376/1626] KVM: x86: Fix leak of free lapic date in kvm_arch_vcpu_init() In function kvm_arch_vcpu_init(), if the memory malloc for vcpu->arch.mce_banks is fail, it does not free the memory of lapic date. This patch fixed it. Cc: stable@kernel.org Signed-off-by: Wei Yongjun Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/x86.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index b265eecc741f..1ddcad452add 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -5072,12 +5072,13 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) GFP_KERNEL); if (!vcpu->arch.mce_banks) { r = -ENOMEM; - goto fail_mmu_destroy; + goto fail_free_lapic; } vcpu->arch.mcg_cap = KVM_MAX_MCE_BANKS; return 0; - +fail_free_lapic: + kvm_free_lapic(vcpu); fail_mmu_destroy: kvm_mmu_destroy(vcpu); fail_free_pio_data: From d8cc108f4fab42b380c6b3f3356f99e8dd5372e2 Mon Sep 17 00:00:00 2001 From: Suravee Suthikulpanit Date: Mon, 18 Jan 2010 11:25:36 -0600 Subject: [PATCH 1377/1626] oprofile/x86: fix crash when profiling more than 28 events With multiplexing enabled oprofile crashs when profiling more than 28 events. This patch fixes this. Signed-off-by: Suravee Suthikulpanit Signed-off-by: Robert Richter --- arch/x86/oprofile/nmi_int.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index cb88b1a0bd5f..76d4f566adee 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -222,7 +222,7 @@ static void nmi_cpu_switch(void *dummy) /* move to next set */ si += model->num_counters; - if ((si > model->num_virt_counters) || (counter_config[si].count == 0)) + if ((si >= model->num_virt_counters) || (counter_config[si].count == 0)) per_cpu(switch_index, cpu) = 0; else per_cpu(switch_index, cpu) = si; From e83e452b0692c9c13372540deb88a77d4ae2553d Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Thu, 21 Jan 2010 23:26:27 +0100 Subject: [PATCH 1378/1626] oprofile/x86: add Xeon 7500 series support Add Xeon 7500 series support to oprofile. Straight forward: it's the same as Core i7, so just detect the model number. No user space changes needed. Signed-off-by: Andi Kleen Signed-off-by: Robert Richter --- arch/x86/oprofile/nmi_int.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index 76d4f566adee..3347f696edc7 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -598,6 +598,7 @@ static int __init ppro_init(char **cpu_type) case 15: case 23: *cpu_type = "i386/core_2"; break; + case 0x2e: case 26: spec = &op_arch_perfmon_spec; *cpu_type = "i386/core_i7"; From 40aa7030e5213a43e9e0554fd7f95534ea310bf3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 22 Jan 2010 18:00:03 +0100 Subject: [PATCH 1379/1626] ASoC: fix a memory-leak in wm8903 Remember to free the temporary register-cache. Signed-off-by: Guennadi Liakhovetski Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm8903.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index ce5515e3f2b0..3595bd57c4eb 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -1504,7 +1504,7 @@ static int wm8903_resume(struct platform_device *pdev) struct i2c_client *i2c = codec->control_data; int i; u16 *reg_cache = codec->reg_cache; - u16 *tmp_cache = kmemdup(codec->reg_cache, sizeof(wm8903_reg_defaults), + u16 *tmp_cache = kmemdup(reg_cache, sizeof(wm8903_reg_defaults), GFP_KERNEL); /* Bring the codec back up to standby first to minimise pop/clicks */ @@ -1516,6 +1516,7 @@ static int wm8903_resume(struct platform_device *pdev) for (i = 2; i < ARRAY_SIZE(wm8903_reg_defaults); i++) if (tmp_cache[i] != reg_cache[i]) snd_soc_write(codec, i, tmp_cache[i]); + kfree(tmp_cache); } else { dev_err(&i2c->dev, "Failed to allocate temporary cache\n"); } From eceb784cec4dc0fcc2993d9ee4a7c0d111ada80a Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 25 Jan 2010 10:35:16 +0800 Subject: [PATCH 1380/1626] drm/i915: disable hotplug detect before Ironlake CRT detect This tries to fix CRT detect loop hang seen on some Ironlake form factor, to clear up hotplug detect state before taking CRT detect to make sure next hotplug detect cycle is consistent. Cc: Stable Team Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_crt.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index ddefc871edfe..79dd4026586f 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -157,6 +157,9 @@ static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector) adpa = I915_READ(PCH_ADPA); adpa &= ~ADPA_CRT_HOTPLUG_MASK; + /* disable HPD first */ + I915_WRITE(PCH_ADPA, adpa); + (void)I915_READ(PCH_ADPA); adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 | ADPA_CRT_HOTPLUG_WARMUP_10MS | From 0ce907f89118aa8748f950700b6919b1d8d8a038 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 23 Jan 2010 20:26:35 +0000 Subject: [PATCH 1381/1626] drm/i915: Prevent use of uninitialized pointers along error path. X.org hang with [drm:i915_gem_do_execbuffer] *ERROR* in dmesg http://bugzilla.kernel.org/show_bug.cgi?id=15114 Matej found he was hitting an error path within i915_gem_do_execbuffer() that led to the attempt to dereference an uninitialised pointer during cleanup. This path used to be safe as we used to calloc the object lists, but this was changed in c8e0f93. Daniel Vetter had also spotted this error and proposed a similar patch. [ 6379.732892] [drm:i915_gem_do_execbuffer] *ERROR* Object ffff880098cd6540 appears more than once in object list [ 6379.740976] [drm:i915_gem_do_execbuffer] *ERROR* Object ffff880098cd6540 appears more than once in object list [ 6379.740995] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 [ 6379.740998] IP: [] i915_gem_do_execbuffer+0xba5/0x1260 [ 6379.741006] PGD babab067 PUD bb435067 PMD 0 [ 6379.741010] Oops: 0002 [#1] PREEMPT SMP [ 6379.741014] last sysfs file: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/ieee80211/phy0/rfkill0/state [ 6379.741017] CPU 1 [ 6379.741021] Pid: 2186, comm: X Not tainted 2.6.33-rc4-00399-g24bc734 #142 M11D/ESPRIMO Mobile M9400 [ 6379.741023] RIP: 0010:[] [] i915_gem_do_execbuffer+0xba5/0x1260 [ 6379.741027] RSP: 0018:ffff8800b9047b78 EFLAGS: 00213206 [ 6379.741029] RAX: 0000000000000000 RBX: 000000000000004f RCX: ffff880098cac800 [ 6379.741032] RDX: ffff880098caca78 RSI: ffff8800b9047c98 RDI: ffff880098cd6540 [ 6379.741034] RBP: ffff8800b9047c78 R08: ffffffff814b96b5 R09: 0000000000000006 [ 6379.741036] R10: 0000000000000000 R11: 0000000000000003 R12: 000000000000004e [ 6379.741038] R13: 00000000fffffff7 R14: 0000000000000000 R15: 0000000000000001 [ 6379.741041] FS: 0000000000000000(0000) GS:ffff880001900000(0063) knlGS:00000000f72636c0 [ 6379.741043] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 6379.741041] FS: 0000000000000000(0000) GS:ffff880001900000(0063) knlGS:00000000f72636c0 [ 6379.741043] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 6379.741045] CR2: 00000000000000a0 CR3: 00000000b9000000 CR4: 00000000000006e0 [ 6379.741048] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6379.741050] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 6379.741052] Process X (pid: 2186, threadinfo ffff8800b9046000, task ffff8800bb5d8000) [ 6379.741054] Stack: [ 6379.741055] ffffc90023f57000 ffffc90023f56fff ffffc90023f56fff ffffc90023f55000 [ 6379.741059] <0> ffff8800b9047c98 ffff8800bb43c840 ffff8800bf1de800 ffff8800bf1de820 [ 6379.741063] <0> ffff8800b9047bd8 ffff880098cac800 0000000000000000 0000000000000002 [ 6379.741068] Call Trace: [ 6379.741072] [] ? i915_gem_execbuffer+0x6b/0x370 [ 6379.741077] [] ? __vmalloc_node+0xa2/0xb0 [ 6379.741080] [] ? i915_gem_execbuffer+0x6b/0x370 [ 6379.741083] [] i915_gem_execbuffer+0x1b6/0x370 [ 6379.741086] [] drm_ioctl+0x1d5/0x460 [ 6379.741089] [] ? i915_gem_execbuffer+0x0/0x370 [ 6379.741093] [] i915_compat_ioctl+0x45/0x50 [ 6379.741097] [] compat_sys_ioctl+0xa9/0x1570 [ 6379.741102] [] ? vfs_read+0x13c/0x1a0 [ 6379.741106] [] sysenter_dispatch+0x7/0x2b [ 6379.741108] Code: 08 85 c0 74 52 31 db 0f 1f 80 00 00 00 00 48 63 c3 48 8b 8d 68 ff ff ff 48 8d 14 c1 48 8b 02 48 85 c0 74 25 48 8b 80 80 00 00 00 80 a0 00 00 00 00 00 00 00 48 8b 3a 48 85 ff 74 0c 48 c7 c6 [ 6379.741142] RIP [] i915_gem_do_execbuffer+0xba5/0x1260 [ 6379.741145] RSP [ 6379.741147] CR2: 00000000000000a0 [ 6379.741159] ---[ end trace 0598809afa4c31db ]--- Reported-by: Matej Laitl Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 0c67924ca80c..1ef7ec4f38fe 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3742,6 +3742,8 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, if (object_list[i] == NULL) { DRM_ERROR("Invalid object handle %d at index %d\n", exec_list[i].handle, i); + /* prevent error path from reading uninitialized data */ + args->buffer_count = i + 1; ret = -EBADF; goto err; } @@ -3750,6 +3752,8 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, if (obj_priv->in_execbuffer) { DRM_ERROR("Object %p appears more than once in object list\n", object_list[i]); + /* prevent error path from reading uninitialized data */ + args->buffer_count = i + 1; ret = -EBADF; goto err; } From d3db7b485ad7c467a61279d6a8ef51a3c83352df Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 23 Jan 2010 15:45:22 +0300 Subject: [PATCH 1382/1626] drbd: null dereference bug epoch is always NULL here. Signed-off-by: Dan Carpenter Signed-off-by: Philipp Reisner --- drivers/block/drbd/drbd_receiver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index f22a5283128a..d065c646b35a 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -1224,7 +1224,7 @@ static int receive_Barrier(struct drbd_conf *mdev, struct p_header *h) epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO); if (!epoch) { dev_warn(DEV, "Allocation of an epoch failed, slowing down\n"); - issue_flush = !test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags); + issue_flush = !test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags); drbd_wait_ee_list_empty(mdev, &mdev->active_ee); if (issue_flush) { rv = drbd_flush_after_epoch(mdev, mdev->current_epoch); From c062df61966405b0be6743bfb0cf300dca2fa7c2 Mon Sep 17 00:00:00 2001 From: Li Peng Date: Sat, 23 Jan 2010 00:12:58 +0800 Subject: [PATCH 1383/1626] drm/i915: enable vblank interrupt on ironlake so far vblank interrupt on ironlake is disabled, this would cause bad gfx performance if userspace calls drm_wait_vblank. This patch enables vblank interrupt on ironlake and follows vblank get/put model. Signed-off-by: Li Peng Acked-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_irq.c | 30 ++++++++++++++++++---------- drivers/gpu/drm/i915/intel_display.c | 1 + 2 files changed, 20 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 89a071a3e6fb..e7472d82132a 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -309,6 +309,12 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev) if (de_iir & DE_GSE) ironlake_opregion_gse_intr(dev); + if (de_iir & DE_PIPEA_VBLANK) + drm_handle_vblank(dev, 0); + + if (de_iir & DE_PIPEB_VBLANK) + drm_handle_vblank(dev, 1); + /* check event from PCH */ if ((de_iir & DE_PCH_EVENT) && (pch_iir & SDE_HOTPLUG_MASK)) { @@ -844,11 +850,11 @@ int i915_enable_vblank(struct drm_device *dev, int pipe) if (!(pipeconf & PIPEACONF_ENABLE)) return -EINVAL; - if (IS_IRONLAKE(dev)) - return 0; - spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); - if (IS_I965G(dev)) + if (IS_IRONLAKE(dev)) + ironlake_enable_display_irq(dev_priv, (pipe == 0) ? + DE_PIPEA_VBLANK: DE_PIPEB_VBLANK); + else if (IS_I965G(dev)) i915_enable_pipestat(dev_priv, pipe, PIPE_START_VBLANK_INTERRUPT_ENABLE); else @@ -866,13 +872,14 @@ void i915_disable_vblank(struct drm_device *dev, int pipe) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; - if (IS_IRONLAKE(dev)) - return; - spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); - i915_disable_pipestat(dev_priv, pipe, - PIPE_VBLANK_INTERRUPT_ENABLE | - PIPE_START_VBLANK_INTERRUPT_ENABLE); + if (IS_IRONLAKE(dev)) + ironlake_disable_display_irq(dev_priv, (pipe == 0) ? + DE_PIPEA_VBLANK: DE_PIPEB_VBLANK); + else + i915_disable_pipestat(dev_priv, pipe, + PIPE_VBLANK_INTERRUPT_ENABLE | + PIPE_START_VBLANK_INTERRUPT_ENABLE); spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } @@ -1015,7 +1022,8 @@ static int ironlake_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* enable kind of interrupts always enabled */ - u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT; + u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | + DE_PIPEA_VBLANK | DE_PIPEB_VBLANK; u32 render_mask = GT_USER_INTERRUPT; u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG | SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 45da78ef4a92..2cc489b6629e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1638,6 +1638,7 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) case DRM_MODE_DPMS_OFF: DRM_DEBUG_KMS("crtc %d dpms off\n", pipe); + drm_vblank_off(dev, pipe); /* Disable display plane */ temp = I915_READ(dspcntr_reg); if ((temp & DISPLAY_PLANE_ENABLE) != 0) { From 8a6c77d645d9111f7bc01f908464301f5c3e0a05 Mon Sep 17 00:00:00 2001 From: Li Peng Date: Thu, 21 Jan 2010 18:45:46 +0800 Subject: [PATCH 1384/1626] drm/i915: Fix the device info of Pineview Pineview doesn't has CXSR and need GTT-based hardware status page. It fixes a X boot hung issue on Pinview since commit cfdf1f Signed-off-by: Li Peng Acked-by: Zhao Yakui Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 46d88965852a..ecac882e1d54 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -120,7 +120,7 @@ const static struct intel_device_info intel_gm45_info = { const static struct intel_device_info intel_pineview_info = { .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .is_i9xx = 1, - .has_pipe_cxsr = 1, + .need_gfx_hws = 1, .has_hotplug = 1, }; From bd1f46deba615971a58193afd0202878cadf19a7 Mon Sep 17 00:00:00 2001 From: Andrew Patterson Date: Fri, 22 Jan 2010 14:06:53 -0700 Subject: [PATCH 1385/1626] PCI: fix nested spinlock hang in aer_inject The aer_inject module hangs in aer_inject() when checking the device's error masks. The hang is due to a recursive use of the aer_inject lock. The aer_inject() routine grabs the lock while processing the error and then calls pci_read_config_dword to read the masks. The pci_read_config_dword routine is earlier overridden by pci_read_aer, which among other things, grabs the aer_inject lock. Fixed by moving the pci_read_config_dword calls to read the masks to before the lock is taken. Acked-by: Huang Ying Signed-off-by: Andrew Patterson Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aer/aer_inject.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 8c30a9544d61..223052b73563 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -321,7 +321,7 @@ static int aer_inject(struct aer_error_inj *einj) unsigned long flags; unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn); int pos_cap_err, rp_pos_cap_err; - u32 sever, mask; + u32 sever, cor_mask, uncor_mask; int ret = 0; dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn); @@ -339,6 +339,9 @@ static int aer_inject(struct aer_error_inj *einj) goto out_put; } pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_SEVER, &sever); + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &cor_mask); + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK, + &uncor_mask); rp_pos_cap_err = pci_find_ext_capability(rpdev, PCI_EXT_CAP_ID_ERR); if (!rp_pos_cap_err) { @@ -374,17 +377,14 @@ static int aer_inject(struct aer_error_inj *einj) err->header_log2 = einj->header_log2; err->header_log3 = einj->header_log3; - pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &mask); - if (einj->cor_status && !(einj->cor_status & ~mask)) { + if (einj->cor_status && !(einj->cor_status & ~cor_mask)) { ret = -EINVAL; printk(KERN_WARNING "The correctable error(s) is masked " "by device\n"); spin_unlock_irqrestore(&inject_lock, flags); goto out_put; } - - pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK, &mask); - if (einj->uncor_status && !(einj->uncor_status & ~mask)) { + if (einj->uncor_status && !(einj->uncor_status & ~uncor_mask)) { ret = -EINVAL; printk(KERN_WARNING "The uncorrectable error(s) is masked " "by device\n"); From ef39a1bf3c4fbdea085c618be424cc88b803f248 Mon Sep 17 00:00:00 2001 From: Denis Turischev Date: Thu, 21 Jan 2010 16:10:07 +0200 Subject: [PATCH 1386/1626] [WATCHDOG] sbc_fitpc2_wdt: fix I/O space access technique. The mdelay function was used between I/O access commands, that causes peak in CPU usage. Fix it by substitution mdelay to msleep. Expand usage on fitPC2 compatible boards according to DMI identification. Signed-off-by: Denis Turischev Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/Kconfig | 4 ++-- drivers/watchdog/sbc_fitpc2_wdt.c | 11 +++++------ 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 088f32f29a6e..050ee147592f 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -396,8 +396,8 @@ config SBC_FITPC2_WATCHDOG tristate "Compulab SBC-FITPC2 watchdog" depends on X86 ---help--- - This is the driver for the built-in watchdog timer on the fit-PC2 - Single-board computer made by Compulab. + This is the driver for the built-in watchdog timer on the fit-PC2, + fit-PC2i, CM-iAM single-board computers made by Compulab. It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux. When "Watchdog Timer Value" enabled one can set 31-255 s operational range. diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c index 91430a89107c..e6763d2a567b 100644 --- a/drivers/watchdog/sbc_fitpc2_wdt.c +++ b/drivers/watchdog/sbc_fitpc2_wdt.c @@ -46,9 +46,9 @@ static DEFINE_SPINLOCK(wdt_lock); static void wdt_send_data(unsigned char command, unsigned char data) { outb(command, COMMAND_PORT); - mdelay(100); + msleep(100); outb(data, DATA_PORT); - mdelay(200); + msleep(200); } static void wdt_enable(void) @@ -202,11 +202,10 @@ static int __init fitpc2_wdt_init(void) { int err; - if (strcmp("SBC-FITPC2", dmi_get_system_info(DMI_BOARD_NAME))) { - pr_info("board name is: %s. Should be SBC-FITPC2\n", - dmi_get_system_info(DMI_BOARD_NAME)); + if (!strstr(dmi_get_system_info(DMI_BOARD_NAME), "SBC-FITPC2")) return -ENODEV; - } + + pr_info("%s found\n", dmi_get_system_info(DMI_BOARD_NAME)); if (!request_region(COMMAND_PORT, 1, WATCHDOG_NAME)) { pr_err("I/O address 0x%04x already in use\n", COMMAND_PORT); From 74bf4076f2ed79b5510440b72a561823a8852ec0 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 25 Jan 2010 15:11:53 -0500 Subject: [PATCH 1387/1626] tracing: Prevent kernel oops with corrupted buffer If the contents of the ftrace ring buffer gets corrupted and the trace file is read, it could create a kernel oops (usualy just killing the user task thread). This is caused by the checking of the pid in the buffer. If the pid is negative, it still references the cmdline cache array, which could point to an invalid address. The simple fix is to test for negative PIDs. Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 0df1b0f2cb9e..eac6875cb990 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -951,6 +951,11 @@ void trace_find_cmdline(int pid, char comm[]) return; } + if (WARN_ON_ONCE(pid < 0)) { + strcpy(comm, ""); + return; + } + if (pid > PID_MAX_DEFAULT) { strcpy(comm, "<...>"); return; From 0b5d9b2689af0f59aeba67dc749b3681290d2166 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 22 Jan 2010 14:22:34 -0800 Subject: [PATCH 1388/1626] iwlwifi: fix pointer signedness warning There are a few station addresses that are char *, instead of the normal u8 *; gcc gives pointer signedness warnings for some of those, so use u8 * consistently. Signed-off-by: Johannes Berg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-sta.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index cde09a890b73..90fbdb25399e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -297,7 +297,7 @@ u8 iwl_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap, u8 flags, } EXPORT_SYMBOL(iwl_add_station); -static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const char *addr) +static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const u8 *addr) { unsigned long flags; u8 sta_id = iwl_find_station(priv, addr); @@ -324,7 +324,7 @@ static void iwl_remove_sta_callback(struct iwl_priv *priv, { struct iwl_rem_sta_cmd *rm_sta = (struct iwl_rem_sta_cmd *)cmd->cmd.payload; - const char *addr = rm_sta->addr; + const u8 *addr = rm_sta->addr; if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n", From aa8bc9ef18a2c5b2b97e1f36ee9604cf15743f96 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 23 Jan 2010 20:04:18 +0100 Subject: [PATCH 1389/1626] ath9k: fix eeprom INI values override for 2GHz-only cards Among other changes, this commit: commit 06d0f0663e11cab4ec5f2c143a118d71a12fbbe9 Author: Sujith Date: Thu Feb 12 10:06:45 2009 +0530 ath9k: Enable Fractional N mode changed the hw attach code to fix up initialization values only for dual band devices, however the commit message did not give a reason as to why this would be useful or necessary. According to tests by Jorge Boncompte, this breaks at least some 2GHz-only cards, so the code should be changed back to the unconditional INI fixup. Signed-off-by: Felix Fietkau Reported-by: Jorge Boncompte Cc: stable@kernel.org Tested-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 2ec61f08cfdb..ae371448b5a0 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -855,12 +855,11 @@ static void ath9k_hw_init_mode_gain_regs(struct ath_hw *ah) } } -static void ath9k_hw_init_11a_eeprom_fix(struct ath_hw *ah) +static void ath9k_hw_init_eeprom_fix(struct ath_hw *ah) { u32 i, j; - if ((ah->hw_version.devid == AR9280_DEVID_PCI) && - test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes)) { + if (ah->hw_version.devid == AR9280_DEVID_PCI) { /* EEPROM Fixup */ for (i = 0; i < ah->iniModes.ia_rows; i++) { @@ -980,7 +979,7 @@ int ath9k_hw_init(struct ath_hw *ah) if (r) return r; - ath9k_hw_init_11a_eeprom_fix(ah); + ath9k_hw_init_eeprom_fix(ah); r = ath9k_hw_init_macaddr(ah); if (r) { From 4f9a91c81273b66afe0b6a9be460b47581b28246 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Mon, 25 Jan 2010 15:46:58 -0800 Subject: [PATCH 1390/1626] qlge: Only free resources if they were allocated Currently qlge tries to release regions even if they were not allocated. This causes messages like the following in the kernel log Trying to free nonexistent resource <00000000006af400-00000000006af4ff> Trying to free nonexistent resource <00003c04ff9f4000-00003c04ff9f7fff> Trying to free nonexistent resource <00003c04ffc00000-00003c04ffcfffff> This patch fixes the goto logic in order to not release the resources if they were not allocated. Signed-off-by: Breno Leitao Signed-off-by: David S. Miller --- drivers/net/qlge/qlge_main.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 707b391afa02..894a7c84faef 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -4119,7 +4119,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev, err = pcie_set_readrq(pdev, 4096); if (err) { dev_err(&pdev->dev, "Set readrq failed.\n"); - goto err_out; + goto err_out1; } err = pci_request_regions(pdev, DRV_NAME); @@ -4140,7 +4140,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev, if (err) { dev_err(&pdev->dev, "No usable DMA configuration.\n"); - goto err_out; + goto err_out2; } /* Set PCIe reset type for EEH to fundamental. */ @@ -4152,7 +4152,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev, if (!qdev->reg_base) { dev_err(&pdev->dev, "Register mapping failed.\n"); err = -ENOMEM; - goto err_out; + goto err_out2; } qdev->doorbell_area_size = pci_resource_len(pdev, 3); @@ -4162,14 +4162,14 @@ static int __devinit ql_init_device(struct pci_dev *pdev, if (!qdev->doorbell_area) { dev_err(&pdev->dev, "Doorbell register mapping failed.\n"); err = -ENOMEM; - goto err_out; + goto err_out2; } err = ql_get_board_info(qdev); if (err) { dev_err(&pdev->dev, "Register access failed.\n"); err = -EIO; - goto err_out; + goto err_out2; } qdev->msg_enable = netif_msg_init(debug, default_msg); spin_lock_init(&qdev->hw_lock); @@ -4179,7 +4179,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev, err = qdev->nic_ops->get_flash(qdev); if (err) { dev_err(&pdev->dev, "Invalid FLASH.\n"); - goto err_out; + goto err_out2; } memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len); @@ -4212,8 +4212,9 @@ static int __devinit ql_init_device(struct pci_dev *pdev, DRV_NAME, DRV_VERSION); } return 0; -err_out: +err_out2: ql_release_all(pdev); +err_out1: pci_disable_device(pdev); return err; } From f81074f86176605bfbfafb9944e27628a4e26ce6 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 25 Jan 2010 15:47:50 -0800 Subject: [PATCH 1391/1626] tcp_probe: avoid modulus operation and wrap fix By rounding up the buffer size to power of 2, several expensive modulus operations can be avoided. This patch also solves a bug where the gap need when ring gets full was not being accounted for. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/ipv4/tcp_probe.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/net/ipv4/tcp_probe.c b/net/ipv4/tcp_probe.c index bb110c5ce1d2..9bc805df95d2 100644 --- a/net/ipv4/tcp_probe.c +++ b/net/ipv4/tcp_probe.c @@ -39,9 +39,9 @@ static int port __read_mostly = 0; MODULE_PARM_DESC(port, "Port to match (0=all)"); module_param(port, int, 0); -static int bufsize __read_mostly = 4096; +static unsigned int bufsize __read_mostly = 4096; MODULE_PARM_DESC(bufsize, "Log buffer size in packets (4096)"); -module_param(bufsize, int, 0); +module_param(bufsize, uint, 0); static int full __read_mostly; MODULE_PARM_DESC(full, "Full log (1=every ack packet received, 0=only cwnd changes)"); @@ -75,12 +75,12 @@ static struct { static inline int tcp_probe_used(void) { - return (tcp_probe.head - tcp_probe.tail) % bufsize; + return (tcp_probe.head - tcp_probe.tail) & (bufsize - 1); } static inline int tcp_probe_avail(void) { - return bufsize - tcp_probe_used(); + return bufsize - tcp_probe_used() - 1; } /* @@ -116,7 +116,7 @@ static int jtcp_rcv_established(struct sock *sk, struct sk_buff *skb, p->ssthresh = tcp_current_ssthresh(sk); p->srtt = tp->srtt >> 3; - tcp_probe.head = (tcp_probe.head + 1) % bufsize; + tcp_probe.head = (tcp_probe.head + 1) & (bufsize - 1); } tcp_probe.lastcwnd = tp->snd_cwnd; spin_unlock(&tcp_probe.lock); @@ -149,7 +149,7 @@ static int tcpprobe_open(struct inode * inode, struct file * file) static int tcpprobe_sprint(char *tbuf, int n) { const struct tcp_log *p - = tcp_probe.log + tcp_probe.tail % bufsize; + = tcp_probe.log + tcp_probe.tail; struct timespec tv = ktime_to_timespec(ktime_sub(p->tstamp, tcp_probe.start)); @@ -192,7 +192,7 @@ static ssize_t tcpprobe_read(struct file *file, char __user *buf, width = tcpprobe_sprint(tbuf, sizeof(tbuf)); if (cnt + width < len) - tcp_probe.tail = (tcp_probe.tail + 1) % bufsize; + tcp_probe.tail = (tcp_probe.tail + 1) & (bufsize - 1); spin_unlock_bh(&tcp_probe.lock); @@ -222,9 +222,10 @@ static __init int tcpprobe_init(void) init_waitqueue_head(&tcp_probe.wait); spin_lock_init(&tcp_probe.lock); - if (bufsize < 0) + if (bufsize == 0) return -EINVAL; + bufsize = roundup_pow_of_two(bufsize); tcp_probe.log = kcalloc(bufsize, sizeof(struct tcp_log), GFP_KERNEL); if (!tcp_probe.log) goto err0; @@ -236,7 +237,7 @@ static __init int tcpprobe_init(void) if (ret) goto err1; - pr_info("TCP probe registered (port=%d)\n", port); + pr_info("TCP probe registered (port=%d) bufsize=%u\n", port, bufsize); return 0; err1: proc_net_remove(&init_net, procname); From 8704a2c8e9db24157a7b08d1678bf840f2318779 Mon Sep 17 00:00:00 2001 From: Guido Barzini Date: Mon, 25 Jan 2010 15:49:19 -0800 Subject: [PATCH 1392/1626] sfc: Add workspace for GMAC bug workaround to MCDI MAC_STATS buffer Due to a hardware bug in the SFC9000 family, the firmware must transfer raw GMAC statistics to host memory before aggregating them into the cooked (speed-independent) MAC statistics. Extend the stats buffer to support this. The length of the buffer is explicit in the MAC_STATS command, so this change is backward-compatible on both sides. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/mcdi_pcol.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/sfc/mcdi_pcol.h b/drivers/net/sfc/mcdi_pcol.h index 2a85360a46f0..73e71f420624 100644 --- a/drivers/net/sfc/mcdi_pcol.h +++ b/drivers/net/sfc/mcdi_pcol.h @@ -1090,8 +1090,10 @@ #define MC_CMD_MAC_RX_LANES01_DISP_ERR 57 #define MC_CMD_MAC_RX_LANES23_DISP_ERR 58 #define MC_CMD_MAC_RX_MATCH_FAULT 59 +#define MC_CMD_GMAC_DMABUF_START 64 +#define MC_CMD_GMAC_DMABUF_END 95 /* Insert new members here. */ -#define MC_CMD_MAC_GENERATION_END 60 +#define MC_CMD_MAC_GENERATION_END 96 #define MC_CMD_MAC_NSTATS (MC_CMD_MAC_GENERATION_END+1) /* MC_CMD_MAC_STATS: From 5a27e86babe79cf5f575394bb1055448458df6c7 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 25 Jan 2010 15:49:59 -0800 Subject: [PATCH 1393/1626] sfc: Use fixed-size buffers for MCDI NVRAM requests The low-level MCDI code always uses 32-bit MMIO operations, and callers must pad input and output buffers to multiples of 4 bytes. The MCDI NVRAM functions are not doing this. Also, their buffers are declared as variable-length arrays with no explicit maximum length. Switch to a fixed buffer size based on the chunk size used by the MTD driver (which is a multiple of 4). Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/mcdi.c | 7 ++++--- drivers/net/sfc/mcdi.h | 1 + drivers/net/sfc/mtd.c | 5 ++--- 3 files changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c index 0d4eba7266ec..9f035b9f0350 100644 --- a/drivers/net/sfc/mcdi.c +++ b/drivers/net/sfc/mcdi.c @@ -804,7 +804,7 @@ int efx_mcdi_nvram_read(struct efx_nic *efx, unsigned int type, loff_t offset, u8 *buffer, size_t length) { u8 inbuf[MC_CMD_NVRAM_READ_IN_LEN]; - u8 outbuf[MC_CMD_NVRAM_READ_OUT_LEN(length)]; + u8 outbuf[MC_CMD_NVRAM_READ_OUT_LEN(EFX_MCDI_NVRAM_LEN_MAX)]; size_t outlen; int rc; @@ -828,7 +828,7 @@ fail: int efx_mcdi_nvram_write(struct efx_nic *efx, unsigned int type, loff_t offset, const u8 *buffer, size_t length) { - u8 inbuf[MC_CMD_NVRAM_WRITE_IN_LEN(length)]; + u8 inbuf[MC_CMD_NVRAM_WRITE_IN_LEN(EFX_MCDI_NVRAM_LEN_MAX)]; int rc; MCDI_SET_DWORD(inbuf, NVRAM_WRITE_IN_TYPE, type); @@ -838,7 +838,8 @@ int efx_mcdi_nvram_write(struct efx_nic *efx, unsigned int type, BUILD_BUG_ON(MC_CMD_NVRAM_WRITE_OUT_LEN != 0); - rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_WRITE, inbuf, sizeof(inbuf), + rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_WRITE, inbuf, + ALIGN(MC_CMD_NVRAM_WRITE_IN_LEN(length), 4), NULL, 0, NULL); if (rc) goto fail; diff --git a/drivers/net/sfc/mcdi.h b/drivers/net/sfc/mcdi.h index de916728c2e3..10ce98f4c0fb 100644 --- a/drivers/net/sfc/mcdi.h +++ b/drivers/net/sfc/mcdi.h @@ -111,6 +111,7 @@ extern int efx_mcdi_nvram_read(struct efx_nic *efx, unsigned int type, extern int efx_mcdi_nvram_write(struct efx_nic *efx, unsigned int type, loff_t offset, const u8 *buffer, size_t length); +#define EFX_MCDI_NVRAM_LEN_MAX 128 extern int efx_mcdi_nvram_erase(struct efx_nic *efx, unsigned int type, loff_t offset, size_t length); extern int efx_mcdi_nvram_update_finish(struct efx_nic *efx, diff --git a/drivers/net/sfc/mtd.c b/drivers/net/sfc/mtd.c index 3a464529a46b..407bbaddfea6 100644 --- a/drivers/net/sfc/mtd.c +++ b/drivers/net/sfc/mtd.c @@ -23,7 +23,6 @@ #include "mcdi_pcol.h" #define EFX_SPI_VERIFY_BUF_LEN 16 -#define EFX_MCDI_CHUNK_LEN 128 struct efx_mtd_partition { struct mtd_info mtd; @@ -428,7 +427,7 @@ static int siena_mtd_read(struct mtd_info *mtd, loff_t start, int rc = 0; while (offset < end) { - chunk = min_t(size_t, end - offset, EFX_MCDI_CHUNK_LEN); + chunk = min_t(size_t, end - offset, EFX_MCDI_NVRAM_LEN_MAX); rc = efx_mcdi_nvram_read(efx, part->mcdi.nvram_type, offset, buffer, chunk); if (rc) @@ -491,7 +490,7 @@ static int siena_mtd_write(struct mtd_info *mtd, loff_t start, } while (offset < end) { - chunk = min_t(size_t, end - offset, EFX_MCDI_CHUNK_LEN); + chunk = min_t(size_t, end - offset, EFX_MCDI_NVRAM_LEN_MAX); rc = efx_mcdi_nvram_write(efx, part->mcdi.nvram_type, offset, buffer, chunk); if (rc) From 39d321577405e8e269fd238b278aaf2425fa788a Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 25 Jan 2010 15:51:01 -0800 Subject: [PATCH 1394/1626] virtio_net: Make delayed refill more reliable I have seen RX stalls on a machine that experienced a suspected OOM. After the stall, the RX buffer is empty on the guest side and there are exactly 16 entries available on the host side. As the number of entries is less than that required by a maximal skb, the host cannot proceed. The guest did not have a refill job scheduled. My diagnosis is that an OOM had occured, with the delayed refill job scheduled. The job was able to allocate at least one skb, but not enough to overcome the minimum required by the host to proceed. As the refill job would only reschedule itself if it failed completely to allocate any skbs, this would lead to an RX stall. The following patch removes this stall possibility by always rescheduling the refill job until the ring is totally refilled. Testing has shown that the RX stall no longer occurs whereas previously it would occur within a day. Signed-off-by: Herbert Xu Acked-by: Rusty Russell Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index c708ecc3cb2e..9ead30bd00c4 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -395,8 +395,7 @@ static void refill_work(struct work_struct *work) vi = container_of(work, struct virtnet_info, refill.work); napi_disable(&vi->napi); - try_fill_recv(vi, GFP_KERNEL); - still_empty = (vi->num == 0); + still_empty = !try_fill_recv(vi, GFP_KERNEL); napi_enable(&vi->napi); /* In theory, this can happen: if we don't get any buffers in From de3f440f8c9922afe8770dd16c84f1c87d779b59 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 14 Jan 2010 13:18:02 -0800 Subject: [PATCH 1395/1626] drm/i915: handle non-flip pending case when unpinning the scanout buffer The first page flip queued will replace the current front buffer, which should have a 0 pending flip count. So at finish time we need to handle that case (i.e. if the flip count is 0 *or* dec_and_test is 0 we need to wake the waiters). Also fix up an error path in the queue function and add some debug output (only enabled with driver debugging). Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2cc489b6629e..5f14dfbf715c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3985,6 +3985,12 @@ void intel_finish_page_flip(struct drm_device *dev, int pipe) spin_lock_irqsave(&dev->event_lock, flags); work = intel_crtc->unpin_work; if (work == NULL || !work->pending) { + if (work && !work->pending) { + obj_priv = work->obj->driver_private; + DRM_DEBUG_DRIVER("flip finish: %p (%d) not pending?\n", + obj_priv, + atomic_read(&obj_priv->pending_flip)); + } spin_unlock_irqrestore(&dev->event_lock, flags); return; } @@ -4006,7 +4012,10 @@ void intel_finish_page_flip(struct drm_device *dev, int pipe) spin_unlock_irqrestore(&dev->event_lock, flags); obj_priv = work->obj->driver_private; - if (atomic_dec_and_test(&obj_priv->pending_flip)) + + /* Initial scanout buffer will have a 0 pending flip count */ + if ((atomic_read(&obj_priv->pending_flip) == 0) || + atomic_dec_and_test(&obj_priv->pending_flip)) DRM_WAKEUP(&dev_priv->pending_flip_queue); schedule_work(&work->work); } @@ -4019,8 +4028,11 @@ void intel_prepare_page_flip(struct drm_device *dev, int plane) unsigned long flags; spin_lock_irqsave(&dev->event_lock, flags); - if (intel_crtc->unpin_work) + if (intel_crtc->unpin_work) { intel_crtc->unpin_work->pending = 1; + } else { + DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n"); + } spin_unlock_irqrestore(&dev->event_lock, flags); } @@ -4054,6 +4066,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, /* We borrow the event spin lock for protecting unpin_work */ spin_lock_irqsave(&dev->event_lock, flags); if (intel_crtc->unpin_work) { + DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); spin_unlock_irqrestore(&dev->event_lock, flags); kfree(work); mutex_unlock(&dev->struct_mutex); @@ -4067,7 +4080,10 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, ret = intel_pin_and_fence_fb_obj(dev, obj); if (ret != 0) { + DRM_DEBUG_DRIVER("flip queue: %p pin & fence failed\n", + obj->driver_private); kfree(work); + intel_crtc->unpin_work = NULL; mutex_unlock(&dev->struct_mutex); return ret; } From 6abce7711fcbd72b42f0c9632c1beccf4e674663 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 26 Jan 2010 04:16:49 -0800 Subject: [PATCH 1396/1626] sparc64: Fix UP build. Can't reference irq_desc[].affinity when !SMP. Reported-by: Alexander Beregalov Signed-off-by: David S. Miller --- arch/sparc/kernel/irq_64.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index f2179cce1e4d..e1cbdb94d97b 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -268,10 +268,8 @@ static int irq_choose_cpu(unsigned int virt_irq, const struct cpumask *affinity) return cpuid; } #else -static int irq_choose_cpu(unsigned int virt_irq, const struct cpumask *affinity) -{ - return real_hard_smp_processor_id(); -} +#define irq_choose_cpu(virt_irq, affinity) \ + real_hard_smp_processor_id() #endif static void sun4u_irq_enable(unsigned int virt_irq) From c92b544bd5d8e7ed7d81c77bbecab6df2a95aa53 Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Tue, 26 Jan 2010 02:40:38 +0000 Subject: [PATCH 1397/1626] ipv6: conntrack: Add member of user to nf_ct_frag6_queue structure The commit 0b5ccb2(title:ipv6: reassembly: use seperate reassembly queues for conntrack and local delivery) has broken the saddr&&daddr member of nf_ct_frag6_queue when creating new queue. And then hash value generated by nf_hashfn() was not equal with that generated by fq_find(). So, a new received fragment can't be inserted to right queue. The patch fixes the bug with adding member of user to nf_ct_frag6_queue structure. Signed-off-by: Shan Wei Acked-by: Patrick McHardy Signed-off-by: David S. Miller --- net/ipv6/netfilter/nf_conntrack_reasm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index 312c20adc83f..624a54832a7c 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -63,6 +63,7 @@ struct nf_ct_frag6_queue struct inet_frag_queue q; __be32 id; /* fragment id */ + u32 user; struct in6_addr saddr; struct in6_addr daddr; From 7b7422a566aa0dc1e582ce263d4c7ff4a772700a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 26 Jan 2010 12:51:10 +0100 Subject: [PATCH 1398/1626] clocksource: Prevent potential kgdb dead lock commit 0f8e8ef7 (clocksource: Simplify clocksource watchdog resume logic) introduced a potential kgdb dead lock. When the kernel is stopped by kgdb inside code which holds watchdog_lock then kgdb dead locks in clocksource_resume_watchdog(). clocksource_resume_watchdog() is called from kbdg via clocksource_touch_watchdog() to avoid that the clock source watchdog marks TSC unstable after the kernel has been stopped. Solve this by replacing spin_lock with a spin_trylock and just return in case the lock is held. Not resetting the watchdog might result in TSC becoming marked unstable, but that's an acceptable penalty for using kgdb. The timekeeping is anyway easily screwed up by kgdb when the system uses either jiffies or a clock source which wraps in short intervals (e.g. pm_timer wraps about every 4.6s), so we really do not have to worry about that occasional TSC marked unstable side effect. The second caller of clocksource_resume_watchdog() is clocksource_resume(). The trylock is safe here as well because the system is UP at this point, interrupts are disabled and nothing else can hold watchdog_lock(). Reported-by: Jason Wessel LKML-Reference: <1264480000-6997-4-git-send-email-jason.wessel@windriver.com> Cc: kgdb-bugreport@lists.sourceforge.net Cc: Martin Schwidefsky Cc: John Stultz Cc: Andrew Morton Signed-off-by: Thomas Gleixner --- kernel/time/clocksource.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index e85c23404d34..13700833c181 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -343,7 +343,19 @@ static void clocksource_resume_watchdog(void) { unsigned long flags; - spin_lock_irqsave(&watchdog_lock, flags); + /* + * We use trylock here to avoid a potential dead lock when + * kgdb calls this code after the kernel has been stopped with + * watchdog_lock held. When watchdog_lock is held we just + * return and accept, that the watchdog might trigger and mark + * the monitored clock source (usually TSC) unstable. + * + * This does not affect the other caller clocksource_resume() + * because at this point the kernel is UP, interrupts are + * disabled and nothing can hold watchdog_lock. + */ + if (!spin_trylock_irqsave(&watchdog_lock, flags)) + return; clocksource_reset_watchdog(); spin_unlock_irqrestore(&watchdog_lock, flags); } @@ -458,8 +470,8 @@ void clocksource_resume(void) * clocksource_touch_watchdog - Update watchdog * * Update the watchdog after exception contexts such as kgdb so as not - * to incorrectly trip the watchdog. - * + * to incorrectly trip the watchdog. This might fail when the kernel + * was stopped in code which holds watchdog_lock. */ void clocksource_touch_watchdog(void) { From e578756c35859a459d78d8416195bc5f5ff897d0 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 26 Jan 2010 17:04:02 +0100 Subject: [PATCH 1399/1626] netfilter: ctnetlink: fix expectation mask dump The protocol number is not initialized, so userspace can't interpret the layer 4 data properly. Signed-off-by: Patrick McHardy --- net/netfilter/nf_conntrack_netlink.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 59d8064eb522..42f21c01a93e 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1437,8 +1437,9 @@ ctnetlink_exp_dump_mask(struct sk_buff *skb, struct nlattr *nest_parms; memset(&m, 0xFF, sizeof(m)); - m.src.u.all = mask->src.u.all; memcpy(&m.src.u3, &mask->src.u3, sizeof(m.src.u3)); + m.src.u.all = mask->src.u.all; + m.dst.protonum = tuple->dst.protonum; nest_parms = nla_nest_start(skb, CTA_EXPECT_MASK | NLA_F_NESTED); if (!nest_parms) From 3092ad054406f069991ca561adc74f2d9fbb6867 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Tue, 26 Jan 2010 15:58:57 +0800 Subject: [PATCH 1400/1626] mac80211: fix NULL pointer dereference when ftrace is enabled I got below kernel oops when I try to bring down the network interface if ftrace is enabled. The root cause is drv_ampdu_action() is passed with a NULL ssn pointer in the BA session tear down case. We need to check and avoid dereferencing it in trace entry assignment. BUG: unable to handle kernel NULL pointer dereference Modules linked in: at (null) IP: [] ftrace_raw_event_drv_ampdu_action+0x10a/0x160 [mac80211] *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [...] Call Trace: [] ? ftrace_raw_event_drv_ampdu_action+0x0/0x160 [mac80211] [] ? __ieee80211_stop_rx_ba_session+0xfc/0x220 [mac80211] [] ? ieee80211_sta_tear_down_BA_sessions+0x3b/0x50 [mac80211] [] ? ieee80211_set_disassoc+0xe6/0x230 [mac80211] [] ? ieee80211_set_disassoc+0x9c/0x230 [mac80211] [] ? ieee80211_mgd_deauth+0x158/0x170 [mac80211] [] ? ieee80211_deauth+0x1b/0x20 [mac80211] [] ? __cfg80211_mlme_deauth+0xe9/0x120 [cfg80211] [] ? __cfg80211_disconnect+0x170/0x1d0 [cfg80211] Cc: Johannes Berg Cc: stable@kernel.org Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- net/mac80211/driver-trace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h index ee94ea0c67e9..da8497ef7063 100644 --- a/net/mac80211/driver-trace.h +++ b/net/mac80211/driver-trace.h @@ -680,7 +680,7 @@ TRACE_EVENT(drv_ampdu_action, __entry->ret = ret; __entry->action = action; __entry->tid = tid; - __entry->ssn = *ssn; + __entry->ssn = ssn ? *ssn : 0; ), TP_printk( From 9611a9b6f6de95c290efc697a3e1d0530878c047 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 22 Jan 2010 08:46:13 +0100 Subject: [PATCH 1401/1626] i.MX25: Allow secondary clocks in DEFINE_CLOCK Signed-off-by: Sascha Hauer --- arch/arm/mach-mx25/clock.c | 41 +++++++++++++++++++------------------- 1 file changed, 21 insertions(+), 20 deletions(-) diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index 6e838b857712..fbe42d258190 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -144,7 +144,7 @@ static void clk_cgcr_disable(struct clk *clk) __raw_writel(reg, clk->enable_reg); } -#define DEFINE_CLOCK(name, i, er, es, gr, sr) \ +#define DEFINE_CLOCK(name, i, er, es, gr, sr, s) \ static struct clk name = { \ .id = i, \ .enable_reg = CRM_BASE + er, \ @@ -153,27 +153,28 @@ static void clk_cgcr_disable(struct clk *clk) .set_rate = sr, \ .enable = clk_cgcr_enable, \ .disable = clk_cgcr_disable, \ + .secondary = s, \ } -DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_ipg, NULL); -DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL); -DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL); -DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL); -DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL); -DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL); -DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL); -DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL); -DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL); -DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL); -DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL); -DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL); -DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL); -DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL); -DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL); -DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL); -DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL); -DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL); -DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL); +DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, NULL); +DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, NULL); +DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, NULL); +DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL, NULL); +DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL, NULL); +DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL, NULL); +DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL); +DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL); +DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL, NULL); #define _REGISTER_CLOCK(d, n, c) \ { \ From 4cd3f96cd4014419a4ea524d840be0fa39e3ddbc Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 22 Jan 2010 08:47:06 +0100 Subject: [PATCH 1402/1626] i.MX25: implement secondary clocks for uarts and fec For uarts and fec need two clocks, implement it using the secondary clock field in struct clk. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx25/clock.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index fbe42d258190..3be51dd46c67 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -157,14 +157,16 @@ static void clk_cgcr_disable(struct clk *clk) } DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL); DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL); -DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, NULL); -DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, NULL); -DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, NULL); -DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL, NULL); -DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL, NULL); +DEFINE_CLOCK(fec_ipg_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk); +DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk); +DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk); +DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk); +DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk); DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL, NULL); DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL); DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL); @@ -174,7 +176,7 @@ DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL); -DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL, &fec_ipg_clk); #define _REGISTER_CLOCK(d, n, c) \ { \ From fadc095622dd188cae88eb2f3ff28fd6e9d2d2f1 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 25 Jan 2010 12:58:19 +0200 Subject: [PATCH 1403/1626] mx25: remove unused mx25_clocks_init() argument The fref is needless on mx25 since the reference clock is fixed at 24MHz. Signed-off-by: Baruch Siach Signed-off-by: Sascha Hauer --- arch/arm/mach-mx25/clock.c | 2 +- arch/arm/mach-mx25/mx25pdk.c | 2 +- arch/arm/plat-mxc/include/mach/common.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index 3be51dd46c67..abd303bc3bf2 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -211,7 +211,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("fec.0", NULL, fec_clk) }; -int __init mx25_clocks_init(unsigned long fref) +int __init mx25_clocks_init(void) { int i; diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c index 921bc99ea231..6f06089246eb 100644 --- a/arch/arm/mach-mx25/mx25pdk.c +++ b/arch/arm/mach-mx25/mx25pdk.c @@ -91,7 +91,7 @@ static void __init mx25pdk_init(void) static void __init mx25pdk_timer_init(void) { - mx25_clocks_init(26000000); + mx25_clocks_init(); } static struct sys_timer mx25pdk_timer = { diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 286cb9b0a25b..4bf1068ffad9 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -32,7 +32,7 @@ extern void mxc91231_init_irq(void); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); extern int mx21_clocks_init(unsigned long lref, unsigned long fref); -extern int mx25_clocks_init(unsigned long fref); +extern int mx25_clocks_init(void); extern int mx27_clocks_init(unsigned long fref); extern int mx31_clocks_init(unsigned long fref); extern int mx35_clocks_init(void); From 828df43f139c7fbf0d505c7b9a666d321a0f2c25 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 25 Jan 2010 12:58:20 +0200 Subject: [PATCH 1404/1626] mx25: properly initialize clocks This patch disables all unnecessary clock in mx25_clocks_init() to make a clean start, the same as is being done for the rest of the i.MX chips. This patch was tested on i.MX25 PDK. Signed-off-by: Baruch Siach Signed-off-by: Sascha Hauer --- arch/arm/mach-mx25/clock.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index abd303bc3bf2..08aaa38f1f1f 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -218,6 +218,14 @@ int __init mx25_clocks_init(void) for (i = 0; i < ARRAY_SIZE(lookups); i++) clkdev_add(&lookups[i]); + /* Turn off all clocks except the ones we need to survive, namely: + * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM, + * SCC + */ + __raw_writel((1 << 19), CRM_BASE + CCM_CGCR0); + __raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1); + __raw_writel((1 << 5), CRM_BASE + CCM_CGCR2); + mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; From faed40665d2d81b7e0e537d14ef680ab3da9f22d Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 25 Jan 2010 12:58:21 +0200 Subject: [PATCH 1405/1626] mx25: fix time accounting The gpt_clk rate function doesn't consider the PER divider. This causes a significant drift in time accounting. Fix this by introducing the correct rate calculation function. Signed-off-by: Baruch Siach Signed-off-by: Sascha Hauer --- arch/arm/mach-mx25/clock.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index 08aaa38f1f1f..c003ac40f9a8 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -119,6 +119,11 @@ static unsigned long get_rate_nfc(struct clk *clk) return get_rate_per(8); } +static unsigned long get_rate_gpt(struct clk *clk) +{ + return get_rate_per(5); +} + static unsigned long get_rate_otg(struct clk *clk) { return 48000000; /* FIXME */ @@ -156,7 +161,7 @@ static void clk_cgcr_disable(struct clk *clk) .secondary = s, \ } -DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_gpt, NULL, NULL); DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL); DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL); From 1c5740237428ca025a30f53c5615edd11201c17b Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 25 Jan 2010 12:58:22 +0200 Subject: [PATCH 1406/1626] mx25: make the FEC AHB clk secondary of the IPG This makes the FEC clock configuration consistent with the UART one. Signed-off-by: Baruch Siach Signed-off-by: Sascha Hauer --- arch/arm/mach-mx25/clock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index c003ac40f9a8..6acc88bcdc40 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -166,7 +166,7 @@ DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL); DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL); -DEFINE_CLOCK(fec_ipg_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL); DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk); DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk); DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk); @@ -181,7 +181,7 @@ DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL); -DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL, &fec_ipg_clk); +DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk); #define _REGISTER_CLOCK(d, n, c) \ { \ From e300839da40e99581581c5d053a95a172651fec8 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 24 Jan 2010 14:47:02 +0100 Subject: [PATCH 1407/1626] firewire: core: add_descriptor size check Presently, firewire-core only checks whether descriptors that are to be added by userspace drivers to the local node's config ROM do not exceed a size of 256 quadlets. However, the sum of the bare minimum ROM plus all descriptors (from firewire-core, from firewire-net, from userspace) must not exceed 256 quadlets. Otherwise, the bounds of a statically allocated buffer will be overwritten. If the kernel survives that, firewire-core will subsequently be unable to parse the local node's config ROM. (Note, userspace drivers can add descriptors only through device files of local nodes. These are usually only accessible by root, unlike device files of remote nodes which may be accessible to lesser privileged users.) Therefore add a test which takes the actual present and required ROM size into account for all descriptors of kernelspace and userspace drivers. Cc: stable@kernel.org Signed-off-by: Stefan Richter --- drivers/firewire/core-card.c | 41 ++++++++++++++++++++++++------------ 1 file changed, 28 insertions(+), 13 deletions(-) diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c index 7083bcc1b9c7..5045156c5313 100644 --- a/drivers/firewire/core-card.c +++ b/drivers/firewire/core-card.c @@ -57,6 +57,8 @@ static LIST_HEAD(descriptor_list); static int descriptor_count; static __be32 tmp_config_rom[256]; +/* ROM header, bus info block, root dir header, capabilities = 7 quadlets */ +static size_t config_rom_length = 1 + 4 + 1 + 1; #define BIB_CRC(v) ((v) << 0) #define BIB_CRC_LENGTH(v) ((v) << 16) @@ -73,7 +75,7 @@ static __be32 tmp_config_rom[256]; #define BIB_CMC ((1) << 30) #define BIB_IMC ((1) << 31) -static size_t generate_config_rom(struct fw_card *card, __be32 *config_rom) +static void generate_config_rom(struct fw_card *card, __be32 *config_rom) { struct fw_descriptor *desc; int i, j, k, length; @@ -130,23 +132,30 @@ static size_t generate_config_rom(struct fw_card *card, __be32 *config_rom) for (i = 0; i < j; i += length + 1) length = fw_compute_block_crc(config_rom + i); - return j; + WARN_ON(j != config_rom_length); } static void update_config_roms(void) { struct fw_card *card; - size_t length; list_for_each_entry (card, &card_list, link) { - length = generate_config_rom(card, tmp_config_rom); - card->driver->set_config_rom(card, tmp_config_rom, length); + generate_config_rom(card, tmp_config_rom); + card->driver->set_config_rom(card, tmp_config_rom, + config_rom_length); } } +static size_t required_space(struct fw_descriptor *desc) +{ + /* descriptor + entry into root dir + optional immediate entry */ + return desc->length + 1 + (desc->immediate > 0 ? 1 : 0); +} + int fw_core_add_descriptor(struct fw_descriptor *desc) { size_t i; + int ret; /* * Check descriptor is valid; the length of all blocks in the @@ -162,15 +171,21 @@ int fw_core_add_descriptor(struct fw_descriptor *desc) mutex_lock(&card_mutex); - list_add_tail(&desc->link, &descriptor_list); - descriptor_count++; - if (desc->immediate > 0) + if (config_rom_length + required_space(desc) > 256) { + ret = -EBUSY; + } else { + list_add_tail(&desc->link, &descriptor_list); + config_rom_length += required_space(desc); descriptor_count++; - update_config_roms(); + if (desc->immediate > 0) + descriptor_count++; + update_config_roms(); + ret = 0; + } mutex_unlock(&card_mutex); - return 0; + return ret; } EXPORT_SYMBOL(fw_core_add_descriptor); @@ -179,6 +194,7 @@ void fw_core_remove_descriptor(struct fw_descriptor *desc) mutex_lock(&card_mutex); list_del(&desc->link); + config_rom_length -= required_space(desc); descriptor_count--; if (desc->immediate > 0) descriptor_count--; @@ -428,7 +444,6 @@ EXPORT_SYMBOL(fw_card_initialize); int fw_card_add(struct fw_card *card, u32 max_receive, u32 link_speed, u64 guid) { - size_t length; int ret; card->max_receive = max_receive; @@ -437,8 +452,8 @@ int fw_card_add(struct fw_card *card, mutex_lock(&card_mutex); - length = generate_config_rom(card, tmp_config_rom); - ret = card->driver->enable(card, tmp_config_rom, length); + generate_config_rom(card, tmp_config_rom); + ret = card->driver->enable(card, tmp_config_rom, config_rom_length); if (ret == 0) list_add_tail(&card->link, &card_list); From 6d3faf6f431bafb25f4b9926c50a7e5c267738c6 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 24 Jan 2010 14:48:00 +0100 Subject: [PATCH 1408/1626] firewire: cdev: add_descriptor documentation fix struct fw_cdev_add_descriptor.length is in quadlets, not in bytes. Also remove any doubts about the endianess of descriptor data. Signed-off-by: Stefan Richter --- include/linux/firewire-cdev.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h index 1f716d9f714b..520ecf86cbb3 100644 --- a/include/linux/firewire-cdev.h +++ b/include/linux/firewire-cdev.h @@ -380,7 +380,7 @@ struct fw_cdev_initiate_bus_reset { * @immediate: If non-zero, immediate key to insert before pointer * @key: Upper 8 bits of root directory pointer * @data: Userspace pointer to contents of descriptor block - * @length: Length of descriptor block data, in bytes + * @length: Length of descriptor block data, in quadlets * @handle: Handle to the descriptor, written by the kernel * * Add a descriptor block and optionally a preceding immediate key to the local @@ -394,6 +394,8 @@ struct fw_cdev_initiate_bus_reset { * If not 0, the @immediate field specifies an immediate key which will be * inserted before the root directory pointer. * + * @immediate, @key, and @data array elements are CPU-endian quadlets. + * * If successful, the kernel adds the descriptor and writes back a handle to the * kernel-side object to be used for later removal of the descriptor block and * immediate key. From 281e20323ab72180137824a298ee9e21e6f9acf6 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 24 Jan 2010 16:45:03 +0100 Subject: [PATCH 1409/1626] firewire: core: fix use-after-free regression in FCP handler Commit db5d247a "firewire: fix use of multiple AV/C devices, allow multiple FCP listeners" introduced a regression into 2.6.33-rc3: The core freed payloads of incoming requests to FCP_Request or FCP_Response before a userspace driver accessed them. We need to copy such payloads for each registered userspace client and free the copies according to the lifetime rules of non-FCP client request resources. (This could possibly be optimized by reference counts instead of copies.) The presently only kernelspace driver which listens for FCP requests, firedtv, was not affected because it already copies FCP frames into an own buffer before returning to firewire-core's FCP handler dispatcher. Signed-off-by: Stefan Richter --- drivers/firewire/core-cdev.c | 50 ++++++++++++++++++++++++++---------- 1 file changed, 36 insertions(+), 14 deletions(-) diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index e6d63849e78e..4eeaed57e219 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -595,13 +596,20 @@ static int ioctl_send_request(struct client *client, void *buffer) client->device->max_speed); } +static inline bool is_fcp_request(struct fw_request *request) +{ + return request == NULL; +} + static void release_request(struct client *client, struct client_resource *resource) { struct inbound_transaction_resource *r = container_of(resource, struct inbound_transaction_resource, resource); - if (r->request) + if (is_fcp_request(r->request)) + kfree(r->data); + else fw_send_response(client->device->card, r->request, RCODE_CONFLICT_ERROR); kfree(r); @@ -616,6 +624,7 @@ static void handle_request(struct fw_card *card, struct fw_request *request, struct address_handler_resource *handler = callback_data; struct inbound_transaction_resource *r; struct inbound_transaction_event *e; + void *fcp_frame = NULL; int ret; r = kmalloc(sizeof(*r), GFP_ATOMIC); @@ -627,6 +636,18 @@ static void handle_request(struct fw_card *card, struct fw_request *request, r->data = payload; r->length = length; + if (is_fcp_request(request)) { + /* + * FIXME: Let core-transaction.c manage a + * single reference-counted copy? + */ + fcp_frame = kmemdup(payload, length, GFP_ATOMIC); + if (fcp_frame == NULL) + goto failed; + + r->data = fcp_frame; + } + r->resource.release = release_request; ret = add_client_resource(handler->client, &r->resource, GFP_ATOMIC); if (ret < 0) @@ -640,13 +661,15 @@ static void handle_request(struct fw_card *card, struct fw_request *request, e->request.closure = handler->closure; queue_event(handler->client, &e->event, - &e->request, sizeof(e->request), payload, length); + &e->request, sizeof(e->request), r->data, length); return; failed: kfree(r); kfree(e); - if (request) + kfree(fcp_frame); + + if (!is_fcp_request(request)) fw_send_response(card, request, RCODE_CONFLICT_ERROR); } @@ -717,18 +740,17 @@ static int ioctl_send_response(struct client *client, void *buffer) r = container_of(resource, struct inbound_transaction_resource, resource); - if (r->request) { - if (request->length < r->length) - r->length = request->length; - if (copy_from_user(r->data, u64_to_uptr(request->data), - r->length)) { - ret = -EFAULT; - kfree(r->request); - goto out; - } - fw_send_response(client->device->card, r->request, - request->rcode); + if (is_fcp_request(r->request)) + goto out; + + if (request->length < r->length) + r->length = request->length; + if (copy_from_user(r->data, u64_to_uptr(request->data), r->length)) { + ret = -EFAULT; + kfree(r->request); + goto out; } + fw_send_response(client->device->card, r->request, request->rcode); out: kfree(r); From c9edda7140ec6a22accf7f2f86da362dfbfd41fc Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 26 Jan 2010 15:41:34 -0500 Subject: [PATCH 1410/1626] NFS: Fix a reference leak in nfs_wb_cancel_page() Signed-off-by: Trond Myklebust Cc: stable@kernel.org Reviewed-by: Chuck Lever --- fs/nfs/write.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/nfs/write.c b/fs/nfs/write.c index d171696017f4..dac8d7676aff 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1541,6 +1541,7 @@ int nfs_wb_page_cancel(struct inode *inode, struct page *page) break; } ret = nfs_wait_on_request(req); + nfs_release_request(req); if (ret < 0) goto out; } From 82be934a59ff891cac598727e5a862ba2b9d1fac Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 26 Jan 2010 15:41:53 -0500 Subject: [PATCH 1411/1626] NFS: Try to commit unstable writes in nfs_release_page() If someone calls nfs_release_page(), we presumably already know that the page is clean, however it may be holding an unstable write. Signed-off-by: Trond Myklebust Cc: stable@kernel.org Reviewed-by: Chuck Lever --- fs/nfs/file.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 6b891328f332..63f2071d6445 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -486,6 +486,8 @@ static int nfs_release_page(struct page *page, gfp_t gfp) { dfprintk(PAGECACHE, "NFS: release_page(%p)\n", page); + if (gfp & __GFP_WAIT) + nfs_wb_page(page->mapping->host, page); /* If PagePrivate() is set, then the page is not freeable */ if (PagePrivate(page)) return 0; From 0aa05887af728b058af91197f0ae9b3ae63dd74a Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 26 Jan 2010 15:42:03 -0500 Subject: [PATCH 1412/1626] NFS: Make nfs_commitdata_release static The symbol nfs_commitdata_release is only used locally in this file. Make it static to prevent the following sparse warning: warning: symbol 'nfs_commitdata_release' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten Cc: Trond Myklebust Signed-off-by: Trond Myklebust Reviewed-by: Chuck Lever --- fs/nfs/write.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/write.c b/fs/nfs/write.c index dac8d7676aff..7b54b8bb101f 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1233,7 +1233,7 @@ int nfs_writeback_done(struct rpc_task *task, struct nfs_write_data *data) #if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4) -void nfs_commitdata_release(void *data) +static void nfs_commitdata_release(void *data) { struct nfs_write_data *wdata = data; From b0706ca415b188ed58788420de4d5c9972b2afb2 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 26 Jan 2010 15:42:11 -0500 Subject: [PATCH 1413/1626] NFS: Avoid warnings when CONFIG_NFS_V4=n Avoid the following warnings when CONFIG_NFS_V4=n: fs/nfs/sysctl.c:19: warning: unused variable `nfs_set_port_max' fs/nfs/sysctl.c:18: warning: unused variable `nfs_set_port_min' by making those variables contingent on NFSv4 being configured. Signed-off-by: David Howells Signed-off-by: Trond Myklebust Reviewed-by: Chuck Lever --- fs/nfs/sysctl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nfs/sysctl.c b/fs/nfs/sysctl.c index 70e1fbbaaeab..ad4d2e787b20 100644 --- a/fs/nfs/sysctl.c +++ b/fs/nfs/sysctl.c @@ -15,8 +15,10 @@ #include "callback.h" +#ifdef CONFIG_NFS_V4 static const int nfs_set_port_min = 0; static const int nfs_set_port_max = 65535; +#endif static struct ctl_table_header *nfs_callback_sysctl_table; static ctl_table nfs_cb_sysctls[] = { From 2bee72a6aa1e6d0a4f5da56217f0d0bbbdd0d9a3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 26 Jan 2010 15:42:21 -0500 Subject: [PATCH 1414/1626] NFSv4: Ensure that the NFSv4 locking can recover from stateid errors In most cases, we just want to mark the lock_stateid sequence id as being uninitialised. Signed-off-by: Trond Myklebust Cc: stable@kernel.org Reviewed-by: Chuck Lever --- fs/nfs/nfs4proc.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 198d51d17c13..0b68238ed0c8 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4088,6 +4088,22 @@ static const struct rpc_call_ops nfs4_recover_lock_ops = { .rpc_release = nfs4_lock_release, }; +static void nfs4_handle_setlk_error(struct nfs_server *server, struct nfs4_lock_state *lsp, int new_lock_owner, int error) +{ + struct nfs_client *clp = server->nfs_client; + struct nfs4_state *state = lsp->ls_state; + + switch (error) { + case -NFS4ERR_ADMIN_REVOKED: + case -NFS4ERR_BAD_STATEID: + case -NFS4ERR_EXPIRED: + if (new_lock_owner != 0 || + (lsp->ls_flags & NFS_LOCK_INITIALIZED) != 0) + nfs4_state_mark_reclaim_nograce(clp, state); + lsp->ls_seqid.flags &= ~NFS_SEQID_CONFIRMED; + }; +} + static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *fl, int recovery_type) { struct nfs4_lockdata *data; @@ -4126,6 +4142,9 @@ static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *f ret = nfs4_wait_for_completion_rpc_task(task); if (ret == 0) { ret = data->rpc_status; + if (ret) + nfs4_handle_setlk_error(data->server, data->lsp, + data->arg.new_lock_owner, ret); } else data->cancelled = 1; rpc_put_task(task); From 8e469ebd6dc32cbaf620e134d79f740bf0ebab79 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 26 Jan 2010 15:42:30 -0500 Subject: [PATCH 1415/1626] NFSv4: Don't allow posix locking against servers that don't support it Signed-off-by: Trond Myklebust Cc: stable@kernel.org Reviewed-by: Chuck Lever --- fs/nfs/nfs4_fs.h | 1 + fs/nfs/nfs4proc.c | 7 ++++++- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 865265bdca03..ea2f41b26aea 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -146,6 +146,7 @@ enum { NFS_O_RDWR_STATE, /* OPEN stateid has read/write state */ NFS_STATE_RECLAIM_REBOOT, /* OPEN stateid server rebooted */ NFS_STATE_RECLAIM_NOGRACE, /* OPEN stateid needs to recover state */ + NFS_STATE_POSIX_LOCKS, /* Posix locks are supported */ }; struct nfs4_state { diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 0b68238ed0c8..be044b58e811 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1658,6 +1658,8 @@ static int _nfs4_do_open(struct inode *dir, struct path *path, fmode_t fmode, in status = PTR_ERR(state); if (IS_ERR(state)) goto err_opendata_put; + if ((opendata->o_res.rflags & NFS4_OPEN_RESULT_LOCKTYPE_POSIX) != 0) + set_bit(NFS_STATE_POSIX_LOCKS, &state->flags); nfs4_opendata_put(opendata); nfs4_put_state_owner(sp); *res = state; @@ -4200,8 +4202,11 @@ static int _nfs4_proc_setlk(struct nfs4_state *state, int cmd, struct file_lock { struct nfs_inode *nfsi = NFS_I(state->inode); unsigned char fl_flags = request->fl_flags; - int status; + int status = -ENOLCK; + if ((fl_flags & FL_POSIX) && + !test_bit(NFS_STATE_POSIX_LOCKS, &state->flags)) + goto out; /* Is this a delegated open? */ status = nfs4_set_lock_state(state, request); if (status != 0) From 03391693a95900875b0973569d2d73ff3aa8972e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 26 Jan 2010 15:42:38 -0500 Subject: [PATCH 1416/1626] NFSv4.1: Don't call nfs4_schedule_state_recovery() unnecessarily Currently, nfs4_handle_exception() will call it twice if called with an error of -NFS4ERR_STALE_CLIENTID, -NFS4ERR_STALE_STATEID or -NFS4ERR_EXPIRED. Signed-off-by: Trond Myklebust Reviewed-by: Chuck Lever --- fs/nfs/nfs4proc.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index be044b58e811..afbfe673489b 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -256,12 +256,8 @@ static int nfs4_handle_exception(const struct nfs_server *server, int errorcode, ret = nfs4_wait_clnt_recover(clp); if (ret == 0) exception->retry = 1; -#if !defined(CONFIG_NFS_V4_1) break; -#else /* !defined(CONFIG_NFS_V4_1) */ - if (!nfs4_has_session(server->nfs_client)) - break; - /* FALLTHROUGH */ +#if defined(CONFIG_NFS_V4_1) case -NFS4ERR_BADSESSION: case -NFS4ERR_BADSLOT: case -NFS4ERR_BAD_HIGH_SLOT: @@ -274,7 +270,7 @@ static int nfs4_handle_exception(const struct nfs_server *server, int errorcode, nfs4_schedule_state_recovery(clp); exception->retry = 1; break; -#endif /* !defined(CONFIG_NFS_V4_1) */ +#endif /* defined(CONFIG_NFS_V4_1) */ case -NFS4ERR_FILE_OPEN: if (exception->timeout > HZ) { /* We have retried a decent amount, time to From a2c0b9e291208f65221a0ad8a0c80a377707d480 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 26 Jan 2010 15:42:47 -0500 Subject: [PATCH 1417/1626] NFS: Ensure that we handle NFS4ERR_STALE_STATEID correctly Even if the server is crazy, we should be able to mark the stateid as being bad, to ensure it gets recovered. Signed-off-by: Trond Myklebust Reviewed-by: Chuck Lever --- fs/nfs/nfs4_fs.h | 1 + fs/nfs/nfs4proc.c | 44 +++++++++++++++++++++++++++++++------------- fs/nfs/nfs4state.c | 2 +- 3 files changed, 33 insertions(+), 14 deletions(-) diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index ea2f41b26aea..0c6fda33d66e 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -278,6 +278,7 @@ extern void nfs4_state_set_mode_locked(struct nfs4_state *, fmode_t); extern void nfs4_schedule_state_recovery(struct nfs_client *); extern void nfs4_schedule_state_manager(struct nfs_client *); extern int nfs4_state_mark_reclaim_nograce(struct nfs_client *clp, struct nfs4_state *state); +extern int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state); extern void nfs41_handle_sequence_flag_errors(struct nfs_client *clp, u32 flags); extern void nfs4_put_lock_state(struct nfs4_lock_state *lsp); extern int nfs4_set_lock_state(struct nfs4_state *state, struct file_lock *fl); diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index afbfe673489b..375f0fae2c6a 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -249,14 +249,14 @@ static int nfs4_handle_exception(const struct nfs_server *server, int errorcode, if (state == NULL) break; nfs4_state_mark_reclaim_nograce(clp, state); - case -NFS4ERR_STALE_CLIENTID: + goto do_state_recovery; case -NFS4ERR_STALE_STATEID: + if (state == NULL) + break; + nfs4_state_mark_reclaim_reboot(clp, state); + case -NFS4ERR_STALE_CLIENTID: case -NFS4ERR_EXPIRED: - nfs4_schedule_state_recovery(clp); - ret = nfs4_wait_clnt_recover(clp); - if (ret == 0) - exception->retry = 1; - break; + goto do_state_recovery; #if defined(CONFIG_NFS_V4_1) case -NFS4ERR_BADSESSION: case -NFS4ERR_BADSLOT: @@ -289,6 +289,12 @@ static int nfs4_handle_exception(const struct nfs_server *server, int errorcode, } /* We failed to handle the error */ return nfs4_map_errors(ret); +do_state_recovery: + nfs4_schedule_state_recovery(clp); + ret = nfs4_wait_clnt_recover(clp); + if (ret == 0) + exception->retry = 1; + return ret; } @@ -3420,15 +3426,14 @@ _nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server, if (state == NULL) break; nfs4_state_mark_reclaim_nograce(clp, state); - case -NFS4ERR_STALE_CLIENTID: + goto do_state_recovery; case -NFS4ERR_STALE_STATEID: + if (state == NULL) + break; + nfs4_state_mark_reclaim_reboot(clp, state); + case -NFS4ERR_STALE_CLIENTID: case -NFS4ERR_EXPIRED: - rpc_sleep_on(&clp->cl_rpcwaitq, task, NULL); - nfs4_schedule_state_recovery(clp); - if (test_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) == 0) - rpc_wake_up_queued_task(&clp->cl_rpcwaitq, task); - task->tk_status = 0; - return -EAGAIN; + goto do_state_recovery; #if defined(CONFIG_NFS_V4_1) case -NFS4ERR_BADSESSION: case -NFS4ERR_BADSLOT: @@ -3456,6 +3461,13 @@ _nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server, } task->tk_status = nfs4_map_errors(task->tk_status); return 0; +do_state_recovery: + rpc_sleep_on(&clp->cl_rpcwaitq, task, NULL); + nfs4_schedule_state_recovery(clp); + if (test_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) == 0) + rpc_wake_up_queued_task(&clp->cl_rpcwaitq, task); + task->tk_status = 0; + return -EAGAIN; } static int @@ -4099,6 +4111,12 @@ static void nfs4_handle_setlk_error(struct nfs_server *server, struct nfs4_lock_ (lsp->ls_flags & NFS_LOCK_INITIALIZED) != 0) nfs4_state_mark_reclaim_nograce(clp, state); lsp->ls_seqid.flags &= ~NFS_SEQID_CONFIRMED; + break; + case -NFS4ERR_STALE_STATEID: + if (new_lock_owner != 0 || + (lsp->ls_flags & NFS_LOCK_INITIALIZED) != 0) + nfs4_state_mark_reclaim_reboot(clp, state); + lsp->ls_seqid.flags &= ~NFS_SEQID_CONFIRMED; }; } diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 6d263ed79e92..c1e2733f4fa4 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -901,7 +901,7 @@ void nfs4_schedule_state_recovery(struct nfs_client *clp) nfs4_schedule_state_manager(clp); } -static int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state) +int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state) { set_bit(NFS_STATE_RECLAIM_REBOOT, &state->flags); From 492a74f4210e15f4701422e2e1c4cd3c1e45ddae Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 25 Jan 2010 15:17:47 -0500 Subject: [PATCH 1418/1626] ring-buffer: Check if ring buffer iterator has stale data Usually reads of the ring buffer is performed by a single task. There are two types of reads from the ring buffer. One is a consuming read which will consume the entry that was read and the next read will be the entry that follows. The other is an iterator that will let the user read the contents of the ring buffer without modifying it. When an iterator is allocated, writes to the ring buffer are disabled to protect the iterator. The problem exists when consuming reads happen while an iterator is allocated. Specifically, the kind of read that swaps out an entire page (used by splice) and replaces it with a new read. If the iterator is on the page that is swapped out, then the next read may read from this swapped out page and return garbage. This patch adds a check when reading the iterator to make sure that the iterator contents are still valid. If a consuming read has taken place, the iterator is reset. Signed-off-by: Steven Rostedt --- kernel/trace/ring_buffer.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index edefe3b2801b..503b630e0bda 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -464,6 +464,8 @@ struct ring_buffer_iter { struct ring_buffer_per_cpu *cpu_buffer; unsigned long head; struct buffer_page *head_page; + struct buffer_page *cache_reader_page; + unsigned long cache_read; u64 read_stamp; }; @@ -2716,6 +2718,8 @@ static void rb_iter_reset(struct ring_buffer_iter *iter) iter->read_stamp = cpu_buffer->read_stamp; else iter->read_stamp = iter->head_page->page->time_stamp; + iter->cache_reader_page = cpu_buffer->reader_page; + iter->cache_read = cpu_buffer->read; } /** @@ -3066,6 +3070,15 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts) cpu_buffer = iter->cpu_buffer; buffer = cpu_buffer->buffer; + /* + * Check if someone performed a consuming read to + * the buffer. A consuming read invalidates the iterator + * and we need to reset the iterator in this case. + */ + if (unlikely(iter->cache_read != cpu_buffer->read || + iter->cache_reader_page != cpu_buffer->reader_page)) + rb_iter_reset(iter); + again: /* * We repeat when a timestamp is encountered. From 3c05d7482777f15e71bb4cb1ba78dee2800dfec6 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 26 Jan 2010 16:14:08 -0500 Subject: [PATCH 1419/1626] ring-buffer: Check for end of page in iterator If the iterator comes to an empty page for some reason, or if the page is emptied by a consuming read. The iterator code currently does not check if the iterator is pass the contents, and may return a false entry. This patch adds a check to the ring buffer iterator to test if the current page has been completely read and sets the iterator to the next page if necessary. Signed-off-by: Steven Rostedt --- kernel/trace/ring_buffer.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 503b630e0bda..8c1b2d290718 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -3064,9 +3064,6 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts) struct ring_buffer_event *event; int nr_loops = 0; - if (ring_buffer_iter_empty(iter)) - return NULL; - cpu_buffer = iter->cpu_buffer; buffer = cpu_buffer->buffer; @@ -3080,6 +3077,9 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts) rb_iter_reset(iter); again: + if (ring_buffer_iter_empty(iter)) + return NULL; + /* * We repeat when a timestamp is encountered. * We can get multiple timestamps by nested interrupts or also @@ -3094,6 +3094,11 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts) if (rb_per_cpu_empty(cpu_buffer)) return NULL; + if (iter->head >= local_read(&iter->head_page->page->commit)) { + rb_inc_iter(iter); + goto again; + } + event = rb_iter_head_event(iter); switch (event->type_len) { From 6993b1bb1e62367f500789835a1f747e12259f07 Mon Sep 17 00:00:00 2001 From: Yang Hongyang Date: Mon, 25 Jan 2010 11:10:32 +0800 Subject: [PATCH 1420/1626] tracing/documentation: Fix a typo in ftrace.txt 'ftrace' is no longer the name of the function tracer, to activate the function trace 'echo function > current_tracer' is to be used instead of 'echo ftrace > current_tracer'. Update the documentation to reflect the current implementation. Signed-off-by: Yang Hongyang LKML-Reference: <4B5D0BA8.20106@cn.fujitsu.com> Signed-off-by: Steven Rostedt --- Documentation/trace/ftrace.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index 8179692fbb90..bab3040da548 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -1625,7 +1625,7 @@ If I am only interested in sys_nanosleep and hrtimer_interrupt: # echo sys_nanosleep hrtimer_interrupt \ > set_ftrace_filter - # echo ftrace > current_tracer + # echo function > current_tracer # echo 1 > tracing_enabled # usleep 1 # echo 0 > tracing_enabled From 03688970347bfea32823953a7ce5886d1713205f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 22 Jan 2010 08:12:47 -0500 Subject: [PATCH 1421/1626] tracing/documentation: Cover new frame pointer semantics Update the graph tracer examples to cover the new frame pointer semantics (in terms of passing it along). Move the HAVE_FUNCTION_GRAPH_FP_TEST docs out of the Kconfig, into the right place, and expand on the details. Signed-off-by: Mike Frysinger LKML-Reference: <1264165967-18938-1-git-send-email-vapier@gentoo.org> Signed-off-by: Steven Rostedt --- Documentation/trace/ftrace-design.txt | 26 +++++++++++++++++++++++--- kernel/trace/Kconfig | 4 +--- 2 files changed, 24 insertions(+), 6 deletions(-) diff --git a/Documentation/trace/ftrace-design.txt b/Documentation/trace/ftrace-design.txt index 239f14b2b55a..6a5a579126b0 100644 --- a/Documentation/trace/ftrace-design.txt +++ b/Documentation/trace/ftrace-design.txt @@ -1,5 +1,6 @@ function tracer guts ==================== + By Mike Frysinger Introduction ------------ @@ -173,14 +174,16 @@ void ftrace_graph_caller(void) unsigned long *frompc = &...; unsigned long selfpc = - MCOUNT_INSN_SIZE; - prepare_ftrace_return(frompc, selfpc); + /* passing frame pointer up is optional -- see below */ + prepare_ftrace_return(frompc, selfpc, frame_pointer); /* restore all state needed by the ABI */ } #endif -For information on how to implement prepare_ftrace_return(), simply look at -the x86 version. The only architecture-specific piece in it is the setup of +For information on how to implement prepare_ftrace_return(), simply look at the +x86 version (the frame pointer passing is optional; see the next section for +more information). The only architecture-specific piece in it is the setup of the fault recovery table (the asm(...) code). The rest should be the same across architectures. @@ -205,6 +208,23 @@ void return_to_handler(void) #endif +HAVE_FUNCTION_GRAPH_FP_TEST +--------------------------- + +An arch may pass in a unique value (frame pointer) to both the entering and +exiting of a function. On exit, the value is compared and if it does not +match, then it will panic the kernel. This is largely a sanity check for bad +code generation with gcc. If gcc for your port sanely updates the frame +pointer under different opitmization levels, then ignore this option. + +However, adding support for it isn't terribly difficult. In your assembly code +that calls prepare_ftrace_return(), pass the frame pointer as the 3rd argument. +Then in the C version of that function, do what the x86 port does and pass it +along to ftrace_push_return_trace() instead of a stub value of 0. + +Similarly, when you call ftrace_return_to_handler(), pass it the frame pointer. + + HAVE_FTRACE_NMI_ENTER --------------------- diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 6c22d8a2f289..60e2ce0181ee 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -27,9 +27,7 @@ config HAVE_FUNCTION_GRAPH_TRACER config HAVE_FUNCTION_GRAPH_FP_TEST bool help - An arch may pass in a unique value (frame pointer) to both the - entering and exiting of a function. On exit, the value is compared - and if it does not match, then it will panic the kernel. + See Documentation/trace/ftrace-design.txt config HAVE_FUNCTION_TRACE_MCOUNT_TEST bool From b04da8bfdfbbd79544cab2fadfdc12e87eb01600 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 26 Jan 2010 15:04:02 -0800 Subject: [PATCH 1422/1626] fnctl: f_modown should call write_lock_irqsave/restore Commit 703625118069f9f8960d356676662d3db5a9d116 exposed that f_modown() should call write_lock_irqsave instead of just write_lock_irq so that because a caller could have a spinlock held and it would not be good to renable interrupts. Cc: Eric W. Biederman Cc: Al Viro Cc: Alan Cox Cc: Tavis Ormandy Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- fs/fcntl.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/fcntl.c b/fs/fcntl.c index 97e01dc0d95f..5ef953e6f908 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -199,7 +199,9 @@ static int setfl(int fd, struct file * filp, unsigned long arg) static void f_modown(struct file *filp, struct pid *pid, enum pid_type type, int force) { - write_lock_irq(&filp->f_owner.lock); + unsigned long flags; + + write_lock_irqsave(&filp->f_owner.lock, flags); if (force || !filp->f_owner.pid) { put_pid(filp->f_owner.pid); filp->f_owner.pid = get_pid(pid); @@ -211,7 +213,7 @@ static void f_modown(struct file *filp, struct pid *pid, enum pid_type type, filp->f_owner.euid = cred->euid; } } - write_unlock_irq(&filp->f_owner.lock); + write_unlock_irqrestore(&filp->f_owner.lock, flags); } int __f_setown(struct file *filp, struct pid *pid, enum pid_type type, From afc70ed05a07bfe171f7a5b8fdc80bdb073d314f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 23 Jan 2010 23:38:27 -0500 Subject: [PATCH 1423/1626] Fix a leak in affs_fill_super() Signed-off-by: Al Viro --- fs/affs/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/affs/super.c b/fs/affs/super.c index 104fdcb3a7fc..b2a5958c6191 100644 --- a/fs/affs/super.c +++ b/fs/affs/super.c @@ -316,6 +316,8 @@ static int affs_fill_super(struct super_block *sb, void *data, int silent) &blocksize,&sbi->s_prefix, sbi->s_volume, &mount_flags)) { printk(KERN_ERR "AFFS: Error parsing options\n"); + kfree(sbi->s_prefix); + kfree(sbi); return -EINVAL; } /* N.B. after this point s_prefix must be released */ From 29333920a5a46edcc9b728e2cf0134d5a9b516ee Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 24 Jan 2010 00:04:07 -0500 Subject: [PATCH 1424/1626] Fix remount races with symlink handling in affs A couple of fields in affs_sb_info is used in follow_link() and symlink() for handling AFFS "absolute" symlinks. Need locking against affs_remount() updates. Signed-off-by: Al Viro --- fs/affs/affs.h | 2 +- fs/affs/namei.c | 7 +++++-- fs/affs/super.c | 17 ++++++++++++++--- fs/affs/symlink.c | 7 +++++-- 4 files changed, 25 insertions(+), 8 deletions(-) diff --git a/fs/affs/affs.h b/fs/affs/affs.h index e511dc621a2e..0e40caaba456 100644 --- a/fs/affs/affs.h +++ b/fs/affs/affs.h @@ -106,8 +106,8 @@ struct affs_sb_info { u32 s_last_bmap; struct buffer_head *s_bmap_bh; char *s_prefix; /* Prefix for volumes and assigns. */ - int s_prefix_len; /* Length of prefix. */ char s_volume[32]; /* Volume prefix for absolute symlinks. */ + spinlock_t symlink_lock; /* protects the previous two */ }; #define SF_INTL 0x0001 /* International filesystem. */ diff --git a/fs/affs/namei.c b/fs/affs/namei.c index 960d336ec694..d70bbbac6b7b 100644 --- a/fs/affs/namei.c +++ b/fs/affs/namei.c @@ -341,10 +341,13 @@ affs_symlink(struct inode *dir, struct dentry *dentry, const char *symname) p = (char *)AFFS_HEAD(bh)->table; lc = '/'; if (*symname == '/') { + struct affs_sb_info *sbi = AFFS_SB(sb); while (*symname == '/') symname++; - while (AFFS_SB(sb)->s_volume[i]) /* Cannot overflow */ - *p++ = AFFS_SB(sb)->s_volume[i++]; + spin_lock(&sbi->symlink_lock); + while (sbi->s_volume[i]) /* Cannot overflow */ + *p++ = sbi->s_volume[i++]; + spin_unlock(&sbi->symlink_lock); } while (i < maxlen && (c = *symname++)) { if (c == '.' && lc == '/' && *symname == '.' && symname[1] == '/') { diff --git a/fs/affs/super.c b/fs/affs/super.c index b2a5958c6191..be6a6e8ed7d6 100644 --- a/fs/affs/super.c +++ b/fs/affs/super.c @@ -221,8 +221,6 @@ parse_options(char *options, uid_t *uid, gid_t *gid, int *mode, int *reserved, s *mount_opts |= SF_MUFS; break; case Opt_prefix: - /* Free any previous prefix */ - kfree(*prefix); *prefix = match_strdup(&args[0]); if (!*prefix) return 0; @@ -311,6 +309,7 @@ static int affs_fill_super(struct super_block *sb, void *data, int silent) return -ENOMEM; sb->s_fs_info = sbi; mutex_init(&sbi->s_bmlock); + spin_lock_init(&sbi->symlink_lock); if (!parse_options(data,&uid,&gid,&i,&reserved,&root_block, &blocksize,&sbi->s_prefix, @@ -518,14 +517,18 @@ affs_remount(struct super_block *sb, int *flags, char *data) unsigned long mount_flags; int res = 0; char *new_opts = kstrdup(data, GFP_KERNEL); + char volume[32]; + char *prefix = NULL; pr_debug("AFFS: remount(flags=0x%x,opts=\"%s\")\n",*flags,data); *flags |= MS_NODIRATIME; + memcpy(volume, sbi->s_volume, 32); if (!parse_options(data, &uid, &gid, &mode, &reserved, &root_block, - &blocksize, &sbi->s_prefix, sbi->s_volume, + &blocksize, &prefix, volume, &mount_flags)) { + kfree(prefix); kfree(new_opts); return -EINVAL; } @@ -536,6 +539,14 @@ affs_remount(struct super_block *sb, int *flags, char *data) sbi->s_mode = mode; sbi->s_uid = uid; sbi->s_gid = gid; + /* protect against readers */ + spin_lock(&sbi->symlink_lock); + if (prefix) { + kfree(sbi->s_prefix); + sbi->s_prefix = prefix; + } + memcpy(sbi->s_volume, volume, 32); + spin_unlock(&sbi->symlink_lock); if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) { unlock_kernel(); diff --git a/fs/affs/symlink.c b/fs/affs/symlink.c index 41782539c907..ee00f08c4f53 100644 --- a/fs/affs/symlink.c +++ b/fs/affs/symlink.c @@ -20,7 +20,6 @@ static int affs_symlink_readpage(struct file *file, struct page *page) int i, j; char c; char lc; - char *pf; pr_debug("AFFS: follow_link(ino=%lu)\n",inode->i_ino); @@ -32,11 +31,15 @@ static int affs_symlink_readpage(struct file *file, struct page *page) j = 0; lf = (struct slink_front *)bh->b_data; lc = 0; - pf = AFFS_SB(inode->i_sb)->s_prefix ? AFFS_SB(inode->i_sb)->s_prefix : "/"; if (strchr(lf->symname,':')) { /* Handle assign or volume name */ + struct affs_sb_info *sbi = AFFS_SB(inode->i_sb); + char *pf; + spin_lock(&sbi->symlink_lock); + pf = sbi->s_prefix ? sbi->s_prefix : "/"; while (i < 1023 && (c = pf[i])) link[i++] = c; + spin_unlock(&sbi->symlink_lock); while (i < 1023 && lf->symname[j] != ':') link[i++] = lf->symname[j++]; if (i < 1023) From 217686e98321a4ff4c1a6cc535e511e37c5d2dbf Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 24 Jan 2010 00:06:22 -0500 Subject: [PATCH 1425/1626] fix affs parse_options() Error handling in that sucker got broken back in 2003. If function returns 0 on failure, it's not nice to add return -EINVAL into it. Adding return 1 on other failure exits is also not a good thing (and yes, original success exits with 1 and some of failure exits with 0 are still there; so's the original logics in callers). Signed-off-by: Al Viro --- fs/affs/super.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/affs/super.c b/fs/affs/super.c index be6a6e8ed7d6..d41e9673cd97 100644 --- a/fs/affs/super.c +++ b/fs/affs/super.c @@ -203,7 +203,7 @@ parse_options(char *options, uid_t *uid, gid_t *gid, int *mode, int *reserved, s switch (token) { case Opt_bs: if (match_int(&args[0], &n)) - return -EINVAL; + return 0; if (n != 512 && n != 1024 && n != 2048 && n != 4096) { printk ("AFFS: Invalid blocksize (512, 1024, 2048, 4096 allowed)\n"); @@ -213,7 +213,7 @@ parse_options(char *options, uid_t *uid, gid_t *gid, int *mode, int *reserved, s break; case Opt_mode: if (match_octal(&args[0], &option)) - return 1; + return 0; *mode = option & 0777; *mount_opts |= SF_SETMODE; break; @@ -231,21 +231,21 @@ parse_options(char *options, uid_t *uid, gid_t *gid, int *mode, int *reserved, s break; case Opt_reserved: if (match_int(&args[0], reserved)) - return 1; + return 0; break; case Opt_root: if (match_int(&args[0], root)) - return 1; + return 0; break; case Opt_setgid: if (match_int(&args[0], &option)) - return 1; + return 0; *gid = option; *mount_opts |= SF_SETGID; break; case Opt_setuid: if (match_int(&args[0], &option)) - return -EINVAL; + return 0; *uid = option; *mount_opts |= SF_SETUID; break; From 5998649f779b7148a8a0c10c46cfa99e27d34dfe Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 24 Jan 2010 00:52:22 -0500 Subject: [PATCH 1426/1626] Fix failure exits in bfs_fill_super() double iput(), leaks... Signed-off-by: Al Viro --- fs/bfs/inode.c | 43 +++++++++++++++++++++---------------------- 1 file changed, 21 insertions(+), 22 deletions(-) diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c index 6f60336c6628..8f3d9fd89604 100644 --- a/fs/bfs/inode.c +++ b/fs/bfs/inode.c @@ -353,35 +353,35 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) struct inode *inode; unsigned i, imap_len; struct bfs_sb_info *info; - long ret = -EINVAL; + int ret = -EINVAL; unsigned long i_sblock, i_eblock, i_eoff, s_size; info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; + mutex_init(&info->bfs_lock); s->s_fs_info = info; sb_set_blocksize(s, BFS_BSIZE); - bh = sb_bread(s, 0); - if(!bh) + info->si_sbh = sb_bread(s, 0); + if (!info->si_sbh) goto out; - bfs_sb = (struct bfs_super_block *)bh->b_data; + bfs_sb = (struct bfs_super_block *)info->si_sbh->b_data; if (le32_to_cpu(bfs_sb->s_magic) != BFS_MAGIC) { if (!silent) printf("No BFS filesystem on %s (magic=%08x)\n", s->s_id, le32_to_cpu(bfs_sb->s_magic)); - goto out; + goto out1; } if (BFS_UNCLEAN(bfs_sb, s) && !silent) printf("%s is unclean, continuing\n", s->s_id); s->s_magic = BFS_MAGIC; - info->si_sbh = bh; if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end)) { printf("Superblock is corrupted\n"); - goto out; + goto out1; } info->si_lasti = (le32_to_cpu(bfs_sb->s_start) - BFS_BSIZE) / @@ -390,7 +390,7 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) imap_len = (info->si_lasti / 8) + 1; info->si_imap = kzalloc(imap_len, GFP_KERNEL); if (!info->si_imap) - goto out; + goto out1; for (i = 0; i < BFS_ROOT_INO; i++) set_bit(i, info->si_imap); @@ -398,15 +398,13 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) inode = bfs_iget(s, BFS_ROOT_INO); if (IS_ERR(inode)) { ret = PTR_ERR(inode); - kfree(info->si_imap); - goto out; + goto out2; } s->s_root = d_alloc_root(inode); if (!s->s_root) { iput(inode); ret = -ENOMEM; - kfree(info->si_imap); - goto out; + goto out2; } info->si_blocks = (le32_to_cpu(bfs_sb->s_end) + 1) >> BFS_BSIZE_BITS; @@ -419,10 +417,8 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) bh = sb_bread(s, info->si_blocks - 1); if (!bh) { printf("Last block not available: %lu\n", info->si_blocks - 1); - iput(inode); ret = -EIO; - kfree(info->si_imap); - goto out; + goto out3; } brelse(bh); @@ -459,11 +455,8 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) printf("Inode 0x%08x corrupted\n", i); brelse(bh); - s->s_root = NULL; - kfree(info->si_imap); - kfree(info); - s->s_fs_info = NULL; - return -EIO; + ret = -EIO; + goto out3; } if (!di->i_ino) { @@ -483,11 +476,17 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) s->s_dirt = 1; } dump_imap("read_super", s); - mutex_init(&info->bfs_lock); return 0; +out3: + dput(s->s_root); + s->s_root = NULL; +out2: + kfree(info->si_imap); +out1: + brelse(info->si_sbh); out: - brelse(bh); + mutex_destroy(&info->bfs_lock); kfree(info); s->s_fs_info = NULL; return ret; From ef52c75e4b1603f6e6102967ad90118205168eae Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 25 Jan 2010 04:50:43 -0500 Subject: [PATCH 1427/1626] get rid of pointless checks after simple_pin_fs() if we'd just got success from it, vfsmount won't be NULL Signed-off-by: Al Viro --- fs/debugfs/inode.c | 11 ++--------- security/inode.c | 11 ++--------- 2 files changed, 4 insertions(+), 18 deletions(-) diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index b486169f42bf..274ac865bae8 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -160,15 +160,8 @@ static int debugfs_create_by_name(const char *name, mode_t mode, * block. A pointer to that is in the struct vfsmount that we * have around. */ - if (!parent) { - if (debugfs_mount && debugfs_mount->mnt_sb) { - parent = debugfs_mount->mnt_sb->s_root; - } - } - if (!parent) { - pr_debug("debugfs: Ah! can not find a parent!\n"); - return -EFAULT; - } + if (!parent) + parent = debugfs_mount->mnt_sb->s_root; *dentry = NULL; mutex_lock(&parent->d_inode->i_mutex); diff --git a/security/inode.c b/security/inode.c index f7496c6a022b..c3a793881d04 100644 --- a/security/inode.c +++ b/security/inode.c @@ -156,15 +156,8 @@ static int create_by_name(const char *name, mode_t mode, * block. A pointer to that is in the struct vfsmount that we * have around. */ - if (!parent ) { - if (mount && mount->mnt_sb) { - parent = mount->mnt_sb->s_root; - } - } - if (!parent) { - pr_debug("securityfs: Ah! can not find a parent!\n"); - return -EFAULT; - } + if (!parent) + parent = mount->mnt_sb->s_root; mutex_lock(&parent->d_inode->i_mutex); *dentry = lookup_one_len(name, parent, strlen(name)); From 7e32b7bb734047c5e3cecf2e896b9cf8fc35d1e8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 25 Jan 2010 06:05:54 -0500 Subject: [PATCH 1428/1626] fix leak in romfs_fill_super() Signed-off-by: Al Viro --- fs/romfs/super.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/romfs/super.c b/fs/romfs/super.c index c117fa80d1e9..42d213546894 100644 --- a/fs/romfs/super.c +++ b/fs/romfs/super.c @@ -544,6 +544,7 @@ error: error_rsb_inval: ret = -EINVAL; error_rsb: + kfree(rsb); return ret; } From 083c73c253c23c20359a344dfe1198ea628e6259 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 25 Jan 2010 06:16:19 -0500 Subject: [PATCH 1429/1626] fix oops in fs/9p late mount failure if 9P ->get_sb() fails late (at root inode or root dentry allocation), we'll hit its ->kill_sb() with NULL ->s_root Signed-off-by: Al Viro --- fs/9p/vfs_super.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c index 14a86448572c..69357c0d9899 100644 --- a/fs/9p/vfs_super.c +++ b/fs/9p/vfs_super.c @@ -188,7 +188,8 @@ static void v9fs_kill_super(struct super_block *s) P9_DPRINTK(P9_DEBUG_VFS, " %p\n", s); - v9fs_dentry_release(s->s_root); /* clunk root */ + if (s->s_root) + v9fs_dentry_release(s->s_root); /* clunk root */ kill_anon_super(s); From 12e9a45609054fb83d4a8b716a5265cc1a393e10 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 25 Jan 2010 18:44:58 -0500 Subject: [PATCH 1430/1626] Fix failure exit in ipathfs deactivate_locked_super() will be done by caller of fill_super, doing it there as well is b0rken. Signed-off-by: Al Viro --- drivers/infiniband/hw/ipath/ipath_fs.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c index b3684060465e..100da8542bba 100644 --- a/drivers/infiniband/hw/ipath/ipath_fs.c +++ b/drivers/infiniband/hw/ipath/ipath_fs.c @@ -346,10 +346,8 @@ static int ipathfs_fill_super(struct super_block *sb, void *data, list_for_each_entry_safe(dd, tmp, &ipath_dev_list, ipath_list) { spin_unlock_irqrestore(&ipath_devs_lock, flags); ret = create_device_files(sb, dd); - if (ret) { - deactivate_locked_super(sb); + if (ret) goto bail; - } spin_lock_irqsave(&ipath_devs_lock, flags); } From c928febf4bc703ea542340e5a208e0445d998839 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 26 Jan 2010 18:27:09 +0000 Subject: [PATCH 1431/1626] starfire: clean up properly if firmware loading fails netdev_open() will return without cleaning up net device or hardware state if firmware loading fails. This results in a BUG() on a second attempt to bring the interface up, reported in , and probably has even worse effects if the driver is removed afterwards. Call netdev_close() to clean up on failure. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15091 Signed-off-by: Ben Hutchings Reported-by: Michael Moffatt Tested-by: Michael Moffatt Cc: "David S. Miller" Cc: Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/starfire.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 95db60adde41..f9521136a869 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -1063,7 +1063,7 @@ static int netdev_open(struct net_device *dev) if (retval) { printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", FIRMWARE_RX); - return retval; + goto out_init; } if (fw_rx->size % 4) { printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", @@ -1108,6 +1108,9 @@ out_tx: release_firmware(fw_tx); out_rx: release_firmware(fw_rx); +out_init: + if (retval) + netdev_close(dev); return retval; } From 48d50674179981e41f432167b2441cec782d5484 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Tue, 26 Jan 2010 19:16:41 +0100 Subject: [PATCH 1432/1626] lockdep: Fix check_usage_backwards() error message Lockdep has found the real bug, but the output doesn't look right to me: > ========================================================= > [ INFO: possible irq lock inversion dependency detected ] > 2.6.33-rc5 #77 > --------------------------------------------------------- > emacs/1609 just changed the state of lock: > (&(&tty->ctrl_lock)->rlock){+.....}, at: [] tty_fasync+0xe8/0x190 > but this lock took another, HARDIRQ-unsafe lock in the past: > (&(&sighand->siglock)->rlock){-.....} "HARDIRQ-unsafe" and "this lock took another" looks wrong, afaics. > ... key at: [] __key.46539+0x0/0x8 > ... acquired at: > [] __lock_acquire+0x1056/0x15a0 > [] lock_acquire+0x9f/0x120 > [] _raw_spin_lock_irqsave+0x52/0x90 > [] __proc_set_tty+0x3e/0x150 > [] tty_open+0x51d/0x5e0 The stack-trace shows that this lock (ctrl_lock) was taken under ->siglock (which is hopefully irq-safe). This is a clear typo in check_usage_backwards() where we tell the print a fancy routine we're forwards. Signed-off-by: Oleg Nesterov Signed-off-by: Peter Zijlstra LKML-Reference: <20100126181641.GA10460@redhat.com> Signed-off-by: Ingo Molnar --- kernel/lockdep.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/lockdep.c b/kernel/lockdep.c index 5feaddcdbe49..c62ec14609b9 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -2147,7 +2147,7 @@ check_usage_backwards(struct task_struct *curr, struct held_lock *this, return ret; return print_irq_inversion_bug(curr, &root, target_entry, - this, 1, irqclass); + this, 0, irqclass); } void print_irqtrace_events(struct task_struct *curr) From da482474b8396e1a099c37ffc6541b78775aedb4 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Tue, 26 Jan 2010 20:37:22 -0600 Subject: [PATCH 1433/1626] x86, msr/cpuid: Pass the number of minors when unregistering MSR and CPUID drivers. Pass the number of minors when unregistering MSR and CPUID drivers. Reported-by: Dean Nelson Signed-off-by: Dean Nelson LKML-Reference: <20100127023722.GA22305@sgi.com> Signed-off-by: Russ Anderson Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpuid.c | 2 +- arch/x86/kernel/msr.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c index cb27fd6136c9..83e5e628de73 100644 --- a/arch/x86/kernel/cpuid.c +++ b/arch/x86/kernel/cpuid.c @@ -229,7 +229,7 @@ static void __exit cpuid_exit(void) for_each_online_cpu(cpu) cpuid_device_destroy(cpu); class_destroy(cpuid_class); - unregister_chrdev(CPUID_MAJOR, "cpu/cpuid"); + __unregister_chrdev(CPUID_MAJOR, 0, NR_CPUS, "cpu/cpuid"); unregister_hotcpu_notifier(&cpuid_class_cpu_notifier); } diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index 4bd93c9b2b27..206735ac8cbd 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -285,7 +285,7 @@ static void __exit msr_exit(void) for_each_online_cpu(cpu) msr_device_destroy(cpu); class_destroy(msr_class); - unregister_chrdev(MSR_MAJOR, "cpu/msr"); + __unregister_chrdev(MSR_MAJOR, 0, NR_CPUS, "cpu/msr"); unregister_hotcpu_notifier(&msr_class_cpu_notifier); } From 294001a80c9810e2fe27aaaad7df8be12a103065 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Wed, 27 Jan 2010 10:12:35 +0100 Subject: [PATCH 1434/1626] [S390] dasd: fix possible NULL pointer errors Fix possible NULL pointer in DASD messages and correct discipline checking. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 8 ++++---- drivers/s390/block/dasd_eckd.c | 2 +- drivers/s390/block/dasd_ioctl.c | 7 ++----- drivers/s390/block/dasd_proc.c | 7 ++----- 4 files changed, 9 insertions(+), 15 deletions(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index fdb2e7c14506..5905936c7c60 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1004,8 +1004,8 @@ static void dasd_handle_killed_request(struct ccw_device *cdev, if (device == NULL || device != dasd_device_from_cdev_locked(cdev) || strncmp(device->discipline->ebcname, (char *) &cqr->magic, 4)) { - DBF_DEV_EVENT(DBF_DEBUG, device, "invalid device in request: " - "bus_id %s", dev_name(&cdev->dev)); + DBF_EVENT_DEVID(DBF_DEBUG, cdev, "%s", + "invalid device in request"); return; } @@ -1078,8 +1078,8 @@ void dasd_int_handler(struct ccw_device *cdev, unsigned long intparm, device = (struct dasd_device *) cqr->startdev; if (!device || strncmp(device->discipline->ebcname, (char *) &cqr->magic, 4)) { - DBF_DEV_EVENT(DBF_DEBUG, device, "invalid device in request: " - "bus_id %s", dev_name(&cdev->dev)); + DBF_EVENT_DEVID(DBF_DEBUG, cdev, "%s", + "invalid device in request"); return; } diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 1c500c462225..1cca21aafaba 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -3033,7 +3033,7 @@ static void dasd_eckd_dump_sense_ccw(struct dasd_device *device, len += sprintf(page + len, KERN_ERR PRINTK_HEADER " in req: %p CS: 0x%02X DS: 0x%02X CC: 0x%02X RC: %d\n", req, scsw_cstat(&irb->scsw), scsw_dstat(&irb->scsw), - scsw_cc(&irb->scsw), req->intrc); + scsw_cc(&irb->scsw), req ? req->intrc : 0); len += sprintf(page + len, KERN_ERR PRINTK_HEADER " device %s: Failing CCW: %p\n", dev_name(&device->cdev->dev), diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c index fc7b30b4a255..7039d9cf0fb4 100644 --- a/drivers/s390/block/dasd_ioctl.c +++ b/drivers/s390/block/dasd_ioctl.c @@ -260,7 +260,7 @@ static int dasd_ioctl_information(struct dasd_block *block, struct ccw_dev_id dev_id; base = block->base; - if (!base->discipline->fill_info) + if (!base->discipline || !base->discipline->fill_info) return -EINVAL; dasd_info = kzalloc(sizeof(struct dasd_information2_t), GFP_KERNEL); @@ -303,10 +303,7 @@ static int dasd_ioctl_information(struct dasd_block *block, dasd_info->features |= ((base->features & DASD_FEATURE_READONLY) != 0); - if (base->discipline) - memcpy(dasd_info->type, base->discipline->name, 4); - else - memcpy(dasd_info->type, "none", 4); + memcpy(dasd_info->type, base->discipline->name, 4); if (block->request_queue->request_fn) { struct list_head *l; diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c index 6315fbd8e68b..71f95f54866f 100644 --- a/drivers/s390/block/dasd_proc.c +++ b/drivers/s390/block/dasd_proc.c @@ -72,7 +72,7 @@ dasd_devices_show(struct seq_file *m, void *v) /* Print device number. */ seq_printf(m, "%s", dev_name(&device->cdev->dev)); /* Print discipline string. */ - if (device != NULL && device->discipline != NULL) + if (device->discipline != NULL) seq_printf(m, "(%s)", device->discipline->name); else seq_printf(m, "(none)"); @@ -92,10 +92,7 @@ dasd_devices_show(struct seq_file *m, void *v) substr = (device->features & DASD_FEATURE_READONLY) ? "(ro)" : " "; seq_printf(m, "%4s: ", substr); /* Print device status information. */ - switch ((device != NULL) ? device->state : -1) { - case -1: - seq_printf(m, "unknown"); - break; + switch (device->state) { case DASD_STATE_NEW: seq_printf(m, "new"); break; From 428aecf67cf673d546627b2813bd4acabd20e3a9 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 27 Jan 2010 10:12:36 +0100 Subject: [PATCH 1435/1626] [S390] irqflags: add missing types.h include Add missing types.h include. Otherwise would cause build breakages on hw breakpoint support, because of undefined BITS_PER_LONG. Also fix up the copyright line and remove the superfluous __KERNEL__ ifdef. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/irqflags.h | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/arch/s390/include/asm/irqflags.h b/arch/s390/include/asm/irqflags.h index 3f26131120b7..c2fb432f576a 100644 --- a/arch/s390/include/asm/irqflags.h +++ b/arch/s390/include/asm/irqflags.h @@ -1,14 +1,12 @@ /* - * include/asm-s390/irqflags.h - * - * Copyright (C) IBM Corp. 2006 - * Author(s): Heiko Carstens + * Copyright IBM Corp. 2006,2010 + * Author(s): Martin Schwidefsky */ #ifndef __ASM_IRQFLAGS_H #define __ASM_IRQFLAGS_H -#ifdef __KERNEL__ +#include #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) @@ -102,5 +100,4 @@ static inline int raw_irqs_disabled_flags(unsigned long flags) /* For spinlocks etc */ #define raw_local_irq_save(x) ((x) = raw_local_irq_disable()) -#endif /* __KERNEL__ */ #endif /* __ASM_IRQFLAGS_H */ From 0b4d78903bf48fe6b125c4c9f0755437a4f21d47 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 27 Jan 2010 10:12:37 +0100 Subject: [PATCH 1436/1626] [S390] use set_current_state in sigsuspend Use set_current_state instead of a direct assignment to set the task state of the current process. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/signal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index 1675c48b9145..6289945562b0 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -64,7 +64,7 @@ SYSCALL_DEFINE3(sigsuspend, int, history0, int, history1, old_sigset_t, mask) recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - current->state = TASK_INTERRUPTIBLE; + set_current_state(TASK_INTERRUPTIBLE); schedule(); set_thread_flag(TIF_RESTORE_SIGMASK); From 0b665d770d2d4dca8e9ea53129735fe214838ec9 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Wed, 27 Jan 2010 10:12:38 +0100 Subject: [PATCH 1437/1626] [S390] sclp_vt220: set initial terminal window size When opening a SCLP VT220 terminal, the terminal window size is not initialized (defaults to zero). Since the SCLP VT220 terminal supports only 80x24, explicitly set the window size to prevent (n)curses applications from guessing the default setting. Signed-off-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_vt220.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c index b9d2a007e93b..3796ffdb8479 100644 --- a/drivers/s390/char/sclp_vt220.c +++ b/drivers/s390/char/sclp_vt220.c @@ -495,6 +495,10 @@ sclp_vt220_open(struct tty_struct *tty, struct file *filp) if (tty->driver_data == NULL) return -ENOMEM; tty->low_latency = 0; + if (!tty->winsize.ws_row && !tty->winsize.ws_col) { + tty->winsize.ws_row = 24; + tty->winsize.ws_col = 80; + } } return 0; } From 19b123ebacacdce5e75045bfe82122b01c821a5b Mon Sep 17 00:00:00 2001 From: Felix Beck Date: Wed, 27 Jan 2010 10:12:39 +0100 Subject: [PATCH 1438/1626] [S390] zcrypt: Do not remove coprocessor for error 8/72 In a case where the number of the input data is bigger than the modulus of the key, the coprocessor adapters will report an 8/72 error. This case is not caught yet, thus the adapter will be taken offline. To prevent this, we return an -EINVAL instead. Signed-off-by: Felix Beck Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/zcrypt_pcicc.c | 2 ++ drivers/s390/crypto/zcrypt_pcixcc.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/s390/crypto/zcrypt_pcicc.c b/drivers/s390/crypto/zcrypt_pcicc.c index a23726a0735c..142f72a2ca5a 100644 --- a/drivers/s390/crypto/zcrypt_pcicc.c +++ b/drivers/s390/crypto/zcrypt_pcicc.c @@ -373,6 +373,8 @@ static int convert_type86(struct zcrypt_device *zdev, zdev->max_mod_size = PCICC_MAX_MOD_SIZE_OLD; return -EAGAIN; } + if (service_rc == 8 && service_rs == 72) + return -EINVAL; zdev->online = 0; return -EAGAIN; /* repeat the request on a different device. */ } diff --git a/drivers/s390/crypto/zcrypt_pcixcc.c b/drivers/s390/crypto/zcrypt_pcixcc.c index 79c120578e61..68f3e6204db8 100644 --- a/drivers/s390/crypto/zcrypt_pcixcc.c +++ b/drivers/s390/crypto/zcrypt_pcixcc.c @@ -470,6 +470,8 @@ static int convert_type86_ica(struct zcrypt_device *zdev, } if (service_rc == 12 && service_rs == 769) return -EINVAL; + if (service_rc == 8 && service_rs == 72) + return -EINVAL; zdev->online = 0; return -EAGAIN; /* repeat the request on a different device. */ } From 21ec7f6dbf10492ce9a21718040677d3e68bd57d Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 27 Jan 2010 10:12:40 +0100 Subject: [PATCH 1439/1626] [S390] fix single stepped svcs with TRACE_IRQFLAGS=y If irq flags tracing is enabled the TRACE_IRQS_ON macros expands to a function call which clobbers registers %r0-%r5. The macro is used in the code path for single stepped system calls. The argument registers %r2-%r6 need to be restored from the stack before the system call function is called. Cc: stable@kernel.org Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/entry.S | 1 + arch/s390/kernel/entry64.S | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 48215d15762b..e8ef21c51bbe 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -571,6 +571,7 @@ pgm_svcper: mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID oi __TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP TRACE_IRQS_ON + lm %r2,%r6,SP_R2(%r15) # load svc arguments stosm __SF_EMPTY(%r15),0x03 # reenable interrupts b BASED(sysc_do_svc) diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 9aff1d449b6e..f33658f09dd7 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -549,6 +549,7 @@ pgm_svcper: mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP TRACE_IRQS_ON + lmg %r2,%r6,SP_R2(%r15) # load svc arguments stosm __SF_EMPTY(%r15),0x03 # reenable interrupts j sysc_do_svc From c5ce5b46af76f52dea21f467397d24c4ae6cb3ff Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 26 Jan 2010 17:47:05 +0200 Subject: [PATCH 1440/1626] UBI: fix volume creation input checking Do not use an unchecked variable UBI_IOCMKVOL ioctl. Signed-off-by: Mika Westerberg Signed-off-by: Artem Bityutskiy Cc: stable@vger.kernel.org --- drivers/mtd/ubi/cdev.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index f237ddbb2713..111ea41c4ecd 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -853,7 +853,6 @@ static long ubi_cdev_ioctl(struct file *file, unsigned int cmd, break; } - req.name[req.name_len] = '\0'; err = verify_mkvol_req(ubi, &req); if (err) break; From b7ae11b34bf042cfb4dbaa3b63b2d5d6d33d4cc4 Mon Sep 17 00:00:00 2001 From: Yong Wang Date: Fri, 22 Jan 2010 09:47:50 +0800 Subject: [PATCH 1441/1626] perf report: Fix segmentation fault when running with '-g none' Segmentation fault occurs when running perf report with '-g none'. Reported-by: Austin Zhang Signed-off-by: Yong Wang Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker LKML-Reference: <20100122014750.GA4111@ywang-moblin2.bj.intel.com> Signed-off-by: Ingo Molnar --- tools/perf/builtin-report.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index db10c0e8ecae..860f1eeeea7d 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -269,7 +269,7 @@ parse_callchain_opt(const struct option *opt __used, const char *arg, else if (!strncmp(tok, "none", strlen(arg))) { callchain_param.mode = CHAIN_NONE; - symbol_conf.use_callchain = true; + symbol_conf.use_callchain = false; return 0; } From 7f5102ca4b8a8e598dbfa154322ea684bc98da96 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Mon, 25 Jan 2010 00:07:30 -0500 Subject: [PATCH 1442/1626] perf: Ignore perf.data.old Tell git to ignore this file. Signed-off-by: WANG Cong LKML-Reference: <20100125051052.3999.28082.sendpatchset@localhost.localdomain> Signed-off-by: Ingo Molnar --- tools/perf/.gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/.gitignore b/tools/perf/.gitignore index fe08660ce0bd..124760bb37b5 100644 --- a/tools/perf/.gitignore +++ b/tools/perf/.gitignore @@ -13,6 +13,7 @@ perf*.xml perf*.html common-cmds.h perf.data +perf.data.old tags TAGS cscope* From aca3bb5910119d4cf6c28568a642582efb4cc14a Mon Sep 17 00:00:00 2001 From: Dimitri Sivanich Date: Fri, 22 Jan 2010 09:41:40 -0600 Subject: [PATCH 1443/1626] x86, UV: Fix RTC latency bug by reading replicated cachelines For SGI UV node controllers (HUB) rev 2.0 or greater, use replicated cachelines to read the RTC timer. This optimization allows faster simulataneous reads from a given socket. Signed-off-by: Dimitri Sivanich Cc: Jack Steiner LKML-Reference: <20100122154140.GB4975@sgi.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/uv_time.c | 13 ++++++++++++- drivers/char/uv_mmtimer.c | 18 +++++++++++------- 2 files changed, 23 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/uv_time.c b/arch/x86/kernel/uv_time.c index 3c84aa001c11..2b75ef638dbc 100644 --- a/arch/x86/kernel/uv_time.c +++ b/arch/x86/kernel/uv_time.c @@ -282,10 +282,21 @@ static int uv_rtc_unset_timer(int cpu, int force) /* * Read the RTC. + * + * Starting with HUB rev 2.0, the UV RTC register is replicated across all + * cachelines of it's own page. This allows faster simultaneous reads + * from a given socket. */ static cycle_t uv_read_rtc(struct clocksource *cs) { - return (cycle_t)uv_read_local_mmr(UVH_RTC); + unsigned long offset; + + if (uv_get_min_hub_revision_id() == 1) + offset = 0; + else + offset = (uv_blade_processor_id() * L1_CACHE_BYTES) % PAGE_SIZE; + + return (cycle_t)uv_read_local_mmr(UVH_RTC | offset); } /* diff --git a/drivers/char/uv_mmtimer.c b/drivers/char/uv_mmtimer.c index 867b67be9f0a..c7072ba14f48 100644 --- a/drivers/char/uv_mmtimer.c +++ b/drivers/char/uv_mmtimer.c @@ -89,13 +89,17 @@ static long uv_mmtimer_ioctl(struct file *file, unsigned int cmd, switch (cmd) { case MMTIMER_GETOFFSET: /* offset of the counter */ /* - * UV RTC register is on its own page + * Starting with HUB rev 2.0, the UV RTC register is + * replicated across all cachelines of it's own page. + * This allows faster simultaneous reads from a given socket. + * + * The offset returned is in 64 bit units. */ - if (PAGE_SIZE <= (1 << 16)) - ret = ((UV_LOCAL_MMR_BASE | UVH_RTC) & (PAGE_SIZE-1)) - / 8; + if (uv_get_min_hub_revision_id() == 1) + ret = 0; else - ret = -ENOSYS; + ret = ((uv_blade_processor_id() * L1_CACHE_BYTES) % + PAGE_SIZE) / 8; break; case MMTIMER_GETRES: /* resolution of the clock in 10^-15 s */ @@ -115,8 +119,8 @@ static long uv_mmtimer_ioctl(struct file *file, unsigned int cmd, ret = hweight64(UVH_RTC_REAL_TIME_CLOCK_MASK); break; - case MMTIMER_MMAPAVAIL: /* can we mmap the clock into userspace? */ - ret = (PAGE_SIZE <= (1 << 16)) ? 1 : 0; + case MMTIMER_MMAPAVAIL: + ret = 1; break; case MMTIMER_GETCOUNTER: From 0531b2aac59c2296570ac52bfc032ef2ace7d5e1 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 27 Jan 2010 09:20:03 -0800 Subject: [PATCH 1444/1626] mm: add new 'read_cache_page_gfp()' helper function It's a simplified 'read_cache_page()' which takes a page allocation flag, so that different paths can control how aggressive the memory allocations are that populate a address space. In particular, the intel GPU object mapping code wants to be able to do a certain amount of own internal memory management by automatically shrinking the address space when memory starts getting tight. This allows it to dynamically use different memory allocation policies on a per-allocation basis, rather than depend on the (static) address space gfp policy. The actual new function is a one-liner, but re-organizing the helper functions to the point where you can do this with a single line of code is what most of the patch is all about. Tested-by: Chris Wilson Signed-off-by: Linus Torvalds --- include/linux/pagemap.h | 2 + mm/filemap.c | 100 +++++++++++++++++++++++++++------------- 2 files changed, 70 insertions(+), 32 deletions(-) diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index ed5d7501e181..3c62ed408492 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -253,6 +253,8 @@ extern struct page * read_cache_page_async(struct address_space *mapping, extern struct page * read_cache_page(struct address_space *mapping, pgoff_t index, filler_t *filler, void *data); +extern struct page * read_cache_page_gfp(struct address_space *mapping, + pgoff_t index, gfp_t gfp_mask); extern int read_cache_pages(struct address_space *mapping, struct list_head *pages, filler_t *filler, void *data); diff --git a/mm/filemap.c b/mm/filemap.c index 96ac6b0eb6cb..e3736923220e 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1634,14 +1634,15 @@ EXPORT_SYMBOL(generic_file_readonly_mmap); static struct page *__read_cache_page(struct address_space *mapping, pgoff_t index, int (*filler)(void *,struct page*), - void *data) + void *data, + gfp_t gfp) { struct page *page; int err; repeat: page = find_get_page(mapping, index); if (!page) { - page = page_cache_alloc_cold(mapping); + page = __page_cache_alloc(gfp | __GFP_COLD); if (!page) return ERR_PTR(-ENOMEM); err = add_to_page_cache_lru(page, mapping, index, GFP_KERNEL); @@ -1661,31 +1662,18 @@ repeat: return page; } -/** - * read_cache_page_async - read into page cache, fill it if needed - * @mapping: the page's address_space - * @index: the page index - * @filler: function to perform the read - * @data: destination for read data - * - * Same as read_cache_page, but don't wait for page to become unlocked - * after submitting it to the filler. - * - * Read into the page cache. If a page already exists, and PageUptodate() is - * not set, try to fill the page but don't wait for it to become unlocked. - * - * If the page does not get brought uptodate, return -EIO. - */ -struct page *read_cache_page_async(struct address_space *mapping, +static struct page *do_read_cache_page(struct address_space *mapping, pgoff_t index, int (*filler)(void *,struct page*), - void *data) + void *data, + gfp_t gfp) + { struct page *page; int err; retry: - page = __read_cache_page(mapping, index, filler, data); + page = __read_cache_page(mapping, index, filler, data, gfp); if (IS_ERR(page)) return page; if (PageUptodate(page)) @@ -1710,8 +1698,67 @@ out: mark_page_accessed(page); return page; } + +/** + * read_cache_page_async - read into page cache, fill it if needed + * @mapping: the page's address_space + * @index: the page index + * @filler: function to perform the read + * @data: destination for read data + * + * Same as read_cache_page, but don't wait for page to become unlocked + * after submitting it to the filler. + * + * Read into the page cache. If a page already exists, and PageUptodate() is + * not set, try to fill the page but don't wait for it to become unlocked. + * + * If the page does not get brought uptodate, return -EIO. + */ +struct page *read_cache_page_async(struct address_space *mapping, + pgoff_t index, + int (*filler)(void *,struct page*), + void *data) +{ + return do_read_cache_page(mapping, index, filler, data, mapping_gfp_mask(mapping)); +} EXPORT_SYMBOL(read_cache_page_async); +static struct page *wait_on_page_read(struct page *page) +{ + if (!IS_ERR(page)) { + wait_on_page_locked(page); + if (!PageUptodate(page)) { + page_cache_release(page); + page = ERR_PTR(-EIO); + } + } + return page; +} + +/** + * read_cache_page_gfp - read into page cache, using specified page allocation flags. + * @mapping: the page's address_space + * @index: the page index + * @gfp: the page allocator flags to use if allocating + * + * This is the same as "read_mapping_page(mapping, index, NULL)", but with + * any new page allocations done using the specified allocation flags. Note + * that the Radix tree operations will still use GFP_KERNEL, so you can't + * expect to do this atomically or anything like that - but you can pass in + * other page requirements. + * + * If the page does not get brought uptodate, return -EIO. + */ +struct page *read_cache_page_gfp(struct address_space *mapping, + pgoff_t index, + gfp_t gfp) +{ + filler_t *filler = (filler_t *)mapping->a_ops->readpage; + + return wait_on_page_read(do_read_cache_page(mapping, index, filler, NULL, gfp)); +} +EXPORT_SYMBOL(read_cache_page_gfp); + /** * read_cache_page - read into page cache, fill it if needed * @mapping: the page's address_space @@ -1729,18 +1776,7 @@ struct page *read_cache_page(struct address_space *mapping, int (*filler)(void *,struct page*), void *data) { - struct page *page; - - page = read_cache_page_async(mapping, index, filler, data); - if (IS_ERR(page)) - goto out; - wait_on_page_locked(page); - if (!PageUptodate(page)) { - page_cache_release(page); - page = ERR_PTR(-EIO); - } - out: - return page; + return wait_on_page_read(read_cache_page_async(mapping, index, filler, data)); } EXPORT_SYMBOL(read_cache_page); From 7a481436787cbc932af6c407b317ac603969a242 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Tue, 26 Jan 2010 21:39:07 +0100 Subject: [PATCH 1445/1626] firewire: ohci: fix crashes with TSB43AB23 on 64bit systems Unsurprisingly, Texas Instruments TSB43AB23 exhibits the same behaviour as TSB43AB22/A in dual buffer IR DMA mode: If descriptors are located at physical addresses above the 31 bit address range (2 GB), the controller will overwrite random memory. With luck, this merely prevents video reception. With only a little less luck, the machine crashes. We use the same workaround here as with TSB43AB22/A: Switch off the dual buffer capability flag and use packet-per-buffer IR DMA instead. Another possible workaround would be to limit the coherent DMA mask to 31 bits. In Linux 2.6.33, this change serves effectively only as documentation since dual buffer mode is not used for any controller anymore. But somebody might want to re-enable it in the future to make use of features of dual buffer DMA that are not available in packet-per-buffer mode. In Linux 2.6.32 and older, this update is vital for anyone with this controller, more than 2 GB RAM, a 64 bit kernel, and FireWire video or audio applications. We have at least four reports: http://bugzilla.kernel.org/show_bug.cgi?id=13808 http://marc.info/?l=linux1394-user&m=126154279004083 https://bugzilla.redhat.com/show_bug.cgi?id=552142 http://marc.info/?l=linux1394-user&m=126432246128386 Reported-by: Paul Johnson Reported-by: Ronneil Camara Reported-by: G Zornetzer Reported-by: Mark Thompson Cc: stable@kernel.org Signed-off-by: Stefan Richter --- drivers/firewire/ohci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index a61571c63c59..2345d4103fe6 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -2420,6 +2420,7 @@ static void ohci_pmac_off(struct pci_dev *dev) #define PCI_VENDOR_ID_AGERE PCI_VENDOR_ID_ATT #define PCI_DEVICE_ID_AGERE_FW643 0x5901 +#define PCI_DEVICE_ID_TI_TSB43AB23 0x8024 static int __devinit pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) @@ -2488,7 +2489,8 @@ static int __devinit pci_probe(struct pci_dev *dev, #if !defined(CONFIG_X86_32) /* dual-buffer mode is broken with descriptor addresses above 2G */ if (dev->vendor == PCI_VENDOR_ID_TI && - dev->device == PCI_DEVICE_ID_TI_TSB43AB22) + (dev->device == PCI_DEVICE_ID_TI_TSB43AB22 || + dev->device == PCI_DEVICE_ID_TI_TSB43AB23)) ohci->use_dualbuffer = false; #endif From 4bdadb9785696439c6e2b3efe34aa76df1149c83 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 27 Jan 2010 13:36:32 +0000 Subject: [PATCH 1446/1626] drm/i915: Selectively enable self-reclaim Having missed the ENOMEM return via i915_gem_fault(), there are probably other paths that I also missed. By not enabling NORETRY by default these paths can run the shrinker and take memory from the system (but not from our own inactive lists because our shrinker can not run whilst we hold the struct mutex) and this may allow the system to survive a little longer whilst our drivers consume all available memory. References: OOM killer unexpectedly called with kernel 2.6.32 http://bugzilla.kernel.org/show_bug.cgi?id=14933 v2: Pass gfp into page mapping. v3: Use new read_cache_page_gfp() instead of open-coding. Signed-off-by: Chris Wilson Cc: KOSAKI Motohiro Cc: Hugh Dickins Cc: Jesse Barnes Cc: Eric Anholt Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- drivers/gpu/drm/drm_gem.c | 13 ------- drivers/gpu/drm/i915/i915_debugfs.c | 2 +- drivers/gpu/drm/i915/i915_drv.h | 2 +- drivers/gpu/drm/i915/i915_gem.c | 54 +++++++++-------------------- 4 files changed, 19 insertions(+), 52 deletions(-) diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index e9dbb481c469..8bf3770f294e 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -142,19 +142,6 @@ drm_gem_object_alloc(struct drm_device *dev, size_t size) if (IS_ERR(obj->filp)) goto free; - /* Basically we want to disable the OOM killer and handle ENOMEM - * ourselves by sacrificing pages from cached buffers. - * XXX shmem_file_[gs]et_gfp_mask() - */ - mapping_set_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping, - GFP_HIGHUSER | - __GFP_COLD | - __GFP_FS | - __GFP_RECLAIMABLE | - __GFP_NORETRY | - __GFP_NOWARN | - __GFP_NOMEMALLOC); - kref_init(&obj->refcount); kref_init(&obj->handlecount); obj->size = size; diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 9c9998c4dceb..a894ade03093 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -290,7 +290,7 @@ static int i915_batchbuffer_info(struct seq_file *m, void *data) list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) { obj = obj_priv->obj; if (obj->read_domains & I915_GEM_DOMAIN_COMMAND) { - ret = i915_gem_object_get_pages(obj); + ret = i915_gem_object_get_pages(obj, 0); if (ret) { DRM_ERROR("Failed to get pages: %d\n", ret); spin_unlock(&dev_priv->mm.active_list_lock); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 2c1669488b5a..aaf934d96f21 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -872,7 +872,7 @@ int i915_gem_attach_phys_object(struct drm_device *dev, void i915_gem_detach_phys_object(struct drm_device *dev, struct drm_gem_object *obj); void i915_gem_free_all_phys_object(struct drm_device *dev); -int i915_gem_object_get_pages(struct drm_gem_object *obj); +int i915_gem_object_get_pages(struct drm_gem_object *obj, gfp_t gfpmask); void i915_gem_object_put_pages(struct drm_gem_object *obj); void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv); void i915_gem_object_flush_write_domain(struct drm_gem_object *obj); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 0c67924ca80c..dda787aafcc6 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -277,7 +277,7 @@ i915_gem_shmem_pread_fast(struct drm_device *dev, struct drm_gem_object *obj, mutex_lock(&dev->struct_mutex); - ret = i915_gem_object_get_pages(obj); + ret = i915_gem_object_get_pages(obj, 0); if (ret != 0) goto fail_unlock; @@ -321,40 +321,24 @@ fail_unlock: return ret; } -static inline gfp_t -i915_gem_object_get_page_gfp_mask (struct drm_gem_object *obj) -{ - return mapping_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping); -} - -static inline void -i915_gem_object_set_page_gfp_mask (struct drm_gem_object *obj, gfp_t gfp) -{ - mapping_set_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping, gfp); -} - static int i915_gem_object_get_pages_or_evict(struct drm_gem_object *obj) { int ret; - ret = i915_gem_object_get_pages(obj); + ret = i915_gem_object_get_pages(obj, __GFP_NORETRY | __GFP_NOWARN); /* If we've insufficient memory to map in the pages, attempt * to make some space by throwing out some old buffers. */ if (ret == -ENOMEM) { struct drm_device *dev = obj->dev; - gfp_t gfp; ret = i915_gem_evict_something(dev, obj->size); if (ret) return ret; - gfp = i915_gem_object_get_page_gfp_mask(obj); - i915_gem_object_set_page_gfp_mask(obj, gfp & ~__GFP_NORETRY); - ret = i915_gem_object_get_pages(obj); - i915_gem_object_set_page_gfp_mask (obj, gfp); + ret = i915_gem_object_get_pages(obj, 0); } return ret; @@ -790,7 +774,7 @@ i915_gem_shmem_pwrite_fast(struct drm_device *dev, struct drm_gem_object *obj, mutex_lock(&dev->struct_mutex); - ret = i915_gem_object_get_pages(obj); + ret = i915_gem_object_get_pages(obj, 0); if (ret != 0) goto fail_unlock; @@ -2230,7 +2214,8 @@ i915_gem_evict_something(struct drm_device *dev, int min_size) } int -i915_gem_object_get_pages(struct drm_gem_object *obj) +i915_gem_object_get_pages(struct drm_gem_object *obj, + gfp_t gfpmask) { struct drm_i915_gem_object *obj_priv = obj->driver_private; int page_count, i; @@ -2256,7 +2241,10 @@ i915_gem_object_get_pages(struct drm_gem_object *obj) inode = obj->filp->f_path.dentry->d_inode; mapping = inode->i_mapping; for (i = 0; i < page_count; i++) { - page = read_mapping_page(mapping, i, NULL); + page = read_cache_page_gfp(mapping, i, + mapping_gfp_mask (mapping) | + __GFP_COLD | + gfpmask); if (IS_ERR(page)) { ret = PTR_ERR(page); i915_gem_object_put_pages(obj); @@ -2579,7 +2567,7 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; struct drm_mm_node *free_space; - bool retry_alloc = false; + gfp_t gfpmask = __GFP_NORETRY | __GFP_NOWARN; int ret; if (obj_priv->madv != I915_MADV_WILLNEED) { @@ -2623,15 +2611,7 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) DRM_INFO("Binding object of size %zd at 0x%08x\n", obj->size, obj_priv->gtt_offset); #endif - if (retry_alloc) { - i915_gem_object_set_page_gfp_mask (obj, - i915_gem_object_get_page_gfp_mask (obj) & ~__GFP_NORETRY); - } - ret = i915_gem_object_get_pages(obj); - if (retry_alloc) { - i915_gem_object_set_page_gfp_mask (obj, - i915_gem_object_get_page_gfp_mask (obj) | __GFP_NORETRY); - } + ret = i915_gem_object_get_pages(obj, gfpmask); if (ret) { drm_mm_put_block(obj_priv->gtt_space); obj_priv->gtt_space = NULL; @@ -2641,9 +2621,9 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) ret = i915_gem_evict_something(dev, obj->size); if (ret) { /* now try to shrink everyone else */ - if (! retry_alloc) { - retry_alloc = true; - goto search_free; + if (gfpmask) { + gfpmask = 0; + goto search_free; } return ret; @@ -4946,7 +4926,7 @@ void i915_gem_detach_phys_object(struct drm_device *dev, if (!obj_priv->phys_obj) return; - ret = i915_gem_object_get_pages(obj); + ret = i915_gem_object_get_pages(obj, 0); if (ret) goto out; @@ -5004,7 +4984,7 @@ i915_gem_attach_phys_object(struct drm_device *dev, obj_priv->phys_obj = dev_priv->mm.phys_objs[id - 1]; obj_priv->phys_obj->cur_obj = obj; - ret = i915_gem_object_get_pages(obj); + ret = i915_gem_object_get_pages(obj, 0); if (ret) { DRM_ERROR("failed to get page list\n"); goto out; From 8ce28d6abff34886d3797b25324c940471b99164 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 27 Jan 2010 20:26:08 +0100 Subject: [PATCH 1447/1626] ALSA: hda - Add an ASUS mobo to MSI blacklist Sid Boyce reported that his machine locks up without enable_msi=0 option. This looks like another ASUS mobo with Nvidia combo. Reported-by: Sid Boyce Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index ec9c348336cc..565de38a3fc7 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2332,6 +2332,7 @@ static void __devinit check_probe_mask(struct azx *chip, int dev) */ static struct snd_pci_quirk msi_black_list[] __devinitdata = { SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */ + SND_PCI_QUIRK(0x1043, 0x829c, "ASUS", 0), /* nvidia */ {} }; From fe1d45e08650213ec83a72d3499c3dd703243792 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Fri, 15 Jan 2010 20:34:46 +0800 Subject: [PATCH 1448/1626] MIPS: Add support of LZO-compressed kernels The necessary changes to the x86 Kconfig and boot/compressed to allow the use of this new compression method. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Cc: Sergei Shtylyov Patchwork: http://patchwork.linux-mips.org/patch/857/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + arch/mips/boot/compressed/Makefile | 2 ++ arch/mips/boot/compressed/decompress.c | 4 ++++ 3 files changed, 7 insertions(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 9541171f1220..8b5d174685f0 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1311,6 +1311,7 @@ config SYS_SUPPORTS_ZBOOT select HAVE_KERNEL_GZIP select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_LZMA + select HAVE_KERNEL_LZO config SYS_SUPPORTS_ZBOOT_UART16550 bool diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index 671d3448fad4..bdcfd49f022d 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -41,9 +41,11 @@ $(obj)/vmlinux.bin: $(KBUILD_IMAGE) suffix_$(CONFIG_KERNEL_GZIP) = gz suffix_$(CONFIG_KERNEL_BZIP2) = bz2 suffix_$(CONFIG_KERNEL_LZMA) = lzma +suffix_$(CONFIG_KERNEL_LZO) = lzo tool_$(CONFIG_KERNEL_GZIP) = gzip tool_$(CONFIG_KERNEL_BZIP2) = bzip2 tool_$(CONFIG_KERNEL_LZMA) = lzma +tool_$(CONFIG_KERNEL_LZO) = lzo $(obj)/vmlinux.$(suffix_y): $(obj)/vmlinux.bin $(call if_changed,$(tool_y)) diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c index e48fd72898a8..55d02b3a6712 100644 --- a/arch/mips/boot/compressed/decompress.c +++ b/arch/mips/boot/compressed/decompress.c @@ -77,6 +77,10 @@ void *memset(void *s, int c, size_t n) #include "../../../../lib/decompress_unlzma.c" #endif +#ifdef CONFIG_KERNEL_LZO +#include "../../../../lib/decompress_unlzo.c" +#endif + void decompress_kernel(unsigned long boot_heap_start) { int zimage_size; From 9c4a6fce2032fcb5bb8339d53fd3dadfd7ddfb98 Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Wed, 20 Jan 2010 20:50:07 +0000 Subject: [PATCH 1449/1626] MIPS: Fix vmlinuz build for 32bit-only math shells POSIX requires $(()) arithmetic in sh only to have long arithmetic so on 32-bit sh binaries might do only 32-bit arithmetic but the arithmetic done in arch/mips/boot/compressed/Makefile needs 64-bit. I play with the AR7 platform, so VMLINUX_LOAD_ADDRESS is 0xffffffff94100000, and for an example 4MiB kernel VMLINUZ_LOAD_ADDRESS is made out to be: ---- alex@berk:~$ bash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' ffffffff94500000 alex@berk:~$ dash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' 80000000003fffff ---- The former is obviously correct whilst the later breaks things royally. Fortunately working with only the lower 32bit's works for both bash and dash: ---- $ bash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 $ dash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 ---- So, we can split the original 64bit string to two parts, and only calculate the low 32bit part, which is big enough (1GiB kernel sizes anyone?) for a normal Linux kernel image file, now, we calculate the VMLINUZ_LOAD_ADDRESS like this: 1. if present, append top 32bit of VMLINUX_LOAD_ADDRESS" as a prefix 2. get the sum of the low 32bit of VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE This patch fixes vmlinuz kernel builds on systems where only a 32bit-only math shell is available. Patch Changelog: Version 2 - simplified method by using 'expr' for 'substr' and making it work with dash once again Version 1 - Revert the removals of '-n "$(VMLINUX_SIZE)"' to avoid the error of "make clean" - Consider more cases of the VMLINUX_LOAD_ADDRESS Version 0 - initial release Signed-off-by: Alexander Clouter Acked-by: Wu Zhangjin Patchwork: http://patchwork.linux-mips.org/patch/861/ Signed-off-by: Ralf Baechle --- arch/mips/boot/compressed/Makefile | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index bdcfd49f022d..9df903d714d7 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -14,8 +14,11 @@ # compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE VMLINUX_SIZE := $(shell wc -c $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | cut -d' ' -f1) -VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536)))) -VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" ] && printf %x $$(($(VMLINUX_LOAD_ADDRESS) + $(VMLINUX_SIZE)))) +VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo -n $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536)))) +# VMLINUZ_LOAD_ADDRESS = concat "high32 of VMLINUX_LOAD_ADDRESS" and "(low32 of VMLINUX_LOAD_ADDRESS) + VMLINUX_SIZE" +HIGH32 := $(shell A=$(VMLINUX_LOAD_ADDRESS); [ $${\#A} -gt 10 ] && expr substr "$(VMLINUX_LOAD_ADDRESS)" 3 $$(($${\#A} - 10))) +LOW32 := $(shell [ -n "$(HIGH32)" ] && A=11 || A=3; expr substr "$(VMLINUX_LOAD_ADDRESS)" $${A} 8) +VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" -a -n "$(LOW32)" ] && printf "$(HIGH32)%08x" $$(($(VMLINUX_SIZE) + 0x$(LOW32)))) # set the default size of the mallocing area for decompressing BOOT_HEAP_SIZE := 0x400000 From 59dfa2fcaecc39fb88bfa196cb15adca7146867a Mon Sep 17 00:00:00 2001 From: David VomLehn Date: Wed, 23 Dec 2009 17:34:46 -0800 Subject: [PATCH 1450/1626] MIPS: PowerTV: Streamline access to platform device registers Pre-compute addresses for the basic ASIC registers. This speeds up access and allows memory for unused configurations to be freed. In addition, uninitialized register addresses will be returned as NULL to catch bad usage quickly. Signed-off-by: David VomLehn To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/806/ Signed-off-by: Ralf Baechle --- .../include/asm/mach-powertv/asic_reg_map.h | 90 ++++++++++++ .../mips/include/asm/mach-powertv/asic_regs.h | 137 +++++++----------- arch/mips/powertv/asic/asic-calliope.c | 131 +++++++++-------- arch/mips/powertv/asic/asic-cronus.c | 131 +++++++++-------- arch/mips/powertv/asic/asic-zeus.c | 131 +++++++++-------- arch/mips/powertv/asic/asic_devices.c | 46 +++--- 6 files changed, 362 insertions(+), 304 deletions(-) create mode 100644 arch/mips/include/asm/mach-powertv/asic_reg_map.h diff --git a/arch/mips/include/asm/mach-powertv/asic_reg_map.h b/arch/mips/include/asm/mach-powertv/asic_reg_map.h new file mode 100644 index 000000000000..6f26cb09828e --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/asic_reg_map.h @@ -0,0 +1,90 @@ +/* + * asic_reg_map.h + * + * A macro-enclosed list of the elements for the register_map structure for + * use in defining and manipulating the structure. + * + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +REGISTER_MAP_ELEMENT(eic_slow0_strt_add) +REGISTER_MAP_ELEMENT(eic_cfg_bits) +REGISTER_MAP_ELEMENT(eic_ready_status) +REGISTER_MAP_ELEMENT(chipver3) +REGISTER_MAP_ELEMENT(chipver2) +REGISTER_MAP_ELEMENT(chipver1) +REGISTER_MAP_ELEMENT(chipver0) +REGISTER_MAP_ELEMENT(uart1_intstat) +REGISTER_MAP_ELEMENT(uart1_inten) +REGISTER_MAP_ELEMENT(uart1_config1) +REGISTER_MAP_ELEMENT(uart1_config2) +REGISTER_MAP_ELEMENT(uart1_divisorhi) +REGISTER_MAP_ELEMENT(uart1_divisorlo) +REGISTER_MAP_ELEMENT(uart1_data) +REGISTER_MAP_ELEMENT(uart1_status) +REGISTER_MAP_ELEMENT(int_stat_3) +REGISTER_MAP_ELEMENT(int_stat_2) +REGISTER_MAP_ELEMENT(int_stat_1) +REGISTER_MAP_ELEMENT(int_stat_0) +REGISTER_MAP_ELEMENT(int_config) +REGISTER_MAP_ELEMENT(int_int_scan) +REGISTER_MAP_ELEMENT(ien_int_3) +REGISTER_MAP_ELEMENT(ien_int_2) +REGISTER_MAP_ELEMENT(ien_int_1) +REGISTER_MAP_ELEMENT(ien_int_0) +REGISTER_MAP_ELEMENT(int_level_3_3) +REGISTER_MAP_ELEMENT(int_level_3_2) +REGISTER_MAP_ELEMENT(int_level_3_1) +REGISTER_MAP_ELEMENT(int_level_3_0) +REGISTER_MAP_ELEMENT(int_level_2_3) +REGISTER_MAP_ELEMENT(int_level_2_2) +REGISTER_MAP_ELEMENT(int_level_2_1) +REGISTER_MAP_ELEMENT(int_level_2_0) +REGISTER_MAP_ELEMENT(int_level_1_3) +REGISTER_MAP_ELEMENT(int_level_1_2) +REGISTER_MAP_ELEMENT(int_level_1_1) +REGISTER_MAP_ELEMENT(int_level_1_0) +REGISTER_MAP_ELEMENT(int_level_0_3) +REGISTER_MAP_ELEMENT(int_level_0_2) +REGISTER_MAP_ELEMENT(int_level_0_1) +REGISTER_MAP_ELEMENT(int_level_0_0) +REGISTER_MAP_ELEMENT(int_docsis_en) +REGISTER_MAP_ELEMENT(mips_pll_setup) +REGISTER_MAP_ELEMENT(usb_fs) +REGISTER_MAP_ELEMENT(test_bus) +REGISTER_MAP_ELEMENT(crt_spare) +REGISTER_MAP_ELEMENT(usb2_ohci_int_mask) +REGISTER_MAP_ELEMENT(usb2_strap) +REGISTER_MAP_ELEMENT(ehci_hcapbase) +REGISTER_MAP_ELEMENT(ohci_hc_revision) +REGISTER_MAP_ELEMENT(bcm1_bs_lmi_steer) +REGISTER_MAP_ELEMENT(usb2_control) +REGISTER_MAP_ELEMENT(usb2_stbus_obc) +REGISTER_MAP_ELEMENT(usb2_stbus_mess_size) +REGISTER_MAP_ELEMENT(usb2_stbus_chunk_size) +REGISTER_MAP_ELEMENT(pcie_regs) +REGISTER_MAP_ELEMENT(tim_ch) +REGISTER_MAP_ELEMENT(tim_cl) +REGISTER_MAP_ELEMENT(gpio_dout) +REGISTER_MAP_ELEMENT(gpio_din) +REGISTER_MAP_ELEMENT(gpio_dir) +REGISTER_MAP_ELEMENT(watchdog) +REGISTER_MAP_ELEMENT(front_panel) +REGISTER_MAP_ELEMENT(misc_clk_ctl1) +REGISTER_MAP_ELEMENT(misc_clk_ctl2) +REGISTER_MAP_ELEMENT(crt_ext_ctl) +REGISTER_MAP_ELEMENT(register_maps) diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h index 9a65c93782f9..1e11236c6dbc 100644 --- a/arch/mips/include/asm/mach-powertv/asic_regs.h +++ b/arch/mips/include/asm/mach-powertv/asic_regs.h @@ -35,11 +35,12 @@ enum asic_type { #define CRONUS_11 0x0B4C1C21 #define CRONUSLITE_10 0x0B4C1C40 -#define NAND_FLASH_BASE 0x03000000 -#define ZEUS_IO_BASE 0x09000000 +#define NAND_FLASH_BASE 0x03000000 #define CALLIOPE_IO_BASE 0x08000000 -#define CRONUS_IO_BASE 0x09000000 -#define ASIC_IO_SIZE 0x01000000 +#define CRONUS_IO_BASE 0x09000000 +#define ZEUS_IO_BASE 0x09000000 + +#define ASIC_IO_SIZE 0x01000000 /* Definitions for backward compatibility */ #define UART1_INTSTAT uart1_intstat @@ -52,96 +53,62 @@ enum asic_type { #define UART1_STATUS uart1_status /* ASIC register enumeration */ -struct register_map { - u32 eic_slow0_strt_add; - u32 eic_cfg_bits; - u32 eic_ready_status; - - u32 chipver3; - u32 chipver2; - u32 chipver1; - u32 chipver0; - - u32 uart1_intstat; - u32 uart1_inten; - u32 uart1_config1; - u32 uart1_config2; - u32 uart1_divisorhi; - u32 uart1_divisorlo; - u32 uart1_data; - u32 uart1_status; - - u32 int_stat_3; - u32 int_stat_2; - u32 int_stat_1; - u32 int_stat_0; - u32 int_config; - u32 int_int_scan; - u32 ien_int_3; - u32 ien_int_2; - u32 ien_int_1; - u32 ien_int_0; - u32 int_level_3_3; - u32 int_level_3_2; - u32 int_level_3_1; - u32 int_level_3_0; - u32 int_level_2_3; - u32 int_level_2_2; - u32 int_level_2_1; - u32 int_level_2_0; - u32 int_level_1_3; - u32 int_level_1_2; - u32 int_level_1_1; - u32 int_level_1_0; - u32 int_level_0_3; - u32 int_level_0_2; - u32 int_level_0_1; - u32 int_level_0_0; - u32 int_docsis_en; - - u32 mips_pll_setup; - u32 usb_fs; - u32 test_bus; - u32 crt_spare; - u32 usb2_ohci_int_mask; - u32 usb2_strap; - u32 ehci_hcapbase; - u32 ohci_hc_revision; - u32 bcm1_bs_lmi_steer; - u32 usb2_control; - u32 usb2_stbus_obc; - u32 usb2_stbus_mess_size; - u32 usb2_stbus_chunk_size; - - u32 pcie_regs; - u32 tim_ch; - u32 tim_cl; - u32 gpio_dout; - u32 gpio_din; - u32 gpio_dir; - u32 watchdog; - u32 front_panel; - - u32 register_maps; +union register_map_entry { + unsigned long phys; + u32 *virt; }; -extern enum asic_type asic; -extern const struct register_map *register_map; -extern unsigned long asic_phy_base; /* Physical address of ASIC */ -extern unsigned long asic_base; /* Virtual address of ASIC */ +#define REGISTER_MAP_ELEMENT(x) union register_map_entry x; +struct register_map { +#include +}; +#undef REGISTER_MAP_ELEMENT + +/** + * register_map_offset_phys - add an offset to the physical address + * @map: Pointer to the &struct register_map + * @offset: Value to add + * + * Only adds the base to non-zero physical addresses + */ +static inline void register_map_offset_phys(struct register_map *map, + unsigned long offset) +{ +#define REGISTER_MAP_ELEMENT(x) do { \ + if (map->x.phys != 0) \ + map->x.phys += offset; \ + } while (false); + +#include +#undef REGISTER_MAP_ELEMENT +} + +/** + * register_map_virtualize - Convert ®ister_map to virtual addresses + * @map: Pointer to ®ister_map to virtualize + */ +static inline void register_map_virtualize(struct register_map *map) +{ +#define REGISTER_MAP_ELEMENT(x) do { \ + map->x.virt = (!map->x.phys) ? NULL : \ + UNCAC_ADDR(phys_to_virt(map->x.phys)); \ + } while (false); + +#include +#undef REGISTER_MAP_ELEMENT +} + +extern struct register_map _asic_register_map; /* * Macros to interface to registers through their ioremapped address - * asic_reg_offset Returns the offset of a given register from the start - * of the ASIC address space * asic_reg_phys_addr Returns the physical address of the given register * asic_reg_addr Returns the iomapped virtual address of the given * register. */ -#define asic_reg_offset(x) (register_map->x) -#define asic_reg_phys_addr(x) (asic_phy_base + asic_reg_offset(x)) -#define asic_reg_addr(x) \ - ((unsigned int *) (asic_base + asic_reg_offset(x))) +#define asic_reg_addr(x) (_asic_register_map.x.virt) +#define asic_reg_phys_addr(x) (virt_to_phys((void *) CAC_ADDR( \ + (unsigned long) asic_reg_addr(x)))) /* * The asic_reg macro is gone. It should be replaced by either asic_read or diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c index 03d3884c6270..1ae6623444b2 100644 --- a/arch/mips/powertv/asic/asic-calliope.c +++ b/arch/mips/powertv/asic/asic-calliope.c @@ -23,76 +23,79 @@ * Description: Defines the platform resources for the SA settop. */ +#include #include -const struct register_map calliope_register_map = { - .eic_slow0_strt_add = 0x800000, - .eic_cfg_bits = 0x800038, - .eic_ready_status = 0x80004c, +#define CALLIOPE_ADDR(x) (CALLIOPE_IO_BASE + (x)) - .chipver3 = 0xA00800, - .chipver2 = 0xA00804, - .chipver1 = 0xA00808, - .chipver0 = 0xA0080c, +const struct register_map calliope_register_map __initdata = { + .eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)}, + .eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)}, + .eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)}, + + .chipver3 = {.phys = CALLIOPE_ADDR(0xA00800)}, + .chipver2 = {.phys = CALLIOPE_ADDR(0xA00804)}, + .chipver1 = {.phys = CALLIOPE_ADDR(0xA00808)}, + .chipver0 = {.phys = CALLIOPE_ADDR(0xA0080c)}, /* The registers of IRBlaster */ - .uart1_intstat = 0xA01800, - .uart1_inten = 0xA01804, - .uart1_config1 = 0xA01808, - .uart1_config2 = 0xA0180C, - .uart1_divisorhi = 0xA01810, - .uart1_divisorlo = 0xA01814, - .uart1_data = 0xA01818, - .uart1_status = 0xA0181C, + .uart1_intstat = {.phys = CALLIOPE_ADDR(0xA01800)}, + .uart1_inten = {.phys = CALLIOPE_ADDR(0xA01804)}, + .uart1_config1 = {.phys = CALLIOPE_ADDR(0xA01808)}, + .uart1_config2 = {.phys = CALLIOPE_ADDR(0xA0180C)}, + .uart1_divisorhi = {.phys = CALLIOPE_ADDR(0xA01810)}, + .uart1_divisorlo = {.phys = CALLIOPE_ADDR(0xA01814)}, + .uart1_data = {.phys = CALLIOPE_ADDR(0xA01818)}, + .uart1_status = {.phys = CALLIOPE_ADDR(0xA0181C)}, - .int_stat_3 = 0xA02800, - .int_stat_2 = 0xA02804, - .int_stat_1 = 0xA02808, - .int_stat_0 = 0xA0280c, - .int_config = 0xA02810, - .int_int_scan = 0xA02818, - .ien_int_3 = 0xA02830, - .ien_int_2 = 0xA02834, - .ien_int_1 = 0xA02838, - .ien_int_0 = 0xA0283c, - .int_level_3_3 = 0xA02880, - .int_level_3_2 = 0xA02884, - .int_level_3_1 = 0xA02888, - .int_level_3_0 = 0xA0288c, - .int_level_2_3 = 0xA02890, - .int_level_2_2 = 0xA02894, - .int_level_2_1 = 0xA02898, - .int_level_2_0 = 0xA0289c, - .int_level_1_3 = 0xA028a0, - .int_level_1_2 = 0xA028a4, - .int_level_1_1 = 0xA028a8, - .int_level_1_0 = 0xA028ac, - .int_level_0_3 = 0xA028b0, - .int_level_0_2 = 0xA028b4, - .int_level_0_1 = 0xA028b8, - .int_level_0_0 = 0xA028bc, - .int_docsis_en = 0xA028F4, + .int_stat_3 = {.phys = CALLIOPE_ADDR(0xA02800)}, + .int_stat_2 = {.phys = CALLIOPE_ADDR(0xA02804)}, + .int_stat_1 = {.phys = CALLIOPE_ADDR(0xA02808)}, + .int_stat_0 = {.phys = CALLIOPE_ADDR(0xA0280c)}, + .int_config = {.phys = CALLIOPE_ADDR(0xA02810)}, + .int_int_scan = {.phys = CALLIOPE_ADDR(0xA02818)}, + .ien_int_3 = {.phys = CALLIOPE_ADDR(0xA02830)}, + .ien_int_2 = {.phys = CALLIOPE_ADDR(0xA02834)}, + .ien_int_1 = {.phys = CALLIOPE_ADDR(0xA02838)}, + .ien_int_0 = {.phys = CALLIOPE_ADDR(0xA0283c)}, + .int_level_3_3 = {.phys = CALLIOPE_ADDR(0xA02880)}, + .int_level_3_2 = {.phys = CALLIOPE_ADDR(0xA02884)}, + .int_level_3_1 = {.phys = CALLIOPE_ADDR(0xA02888)}, + .int_level_3_0 = {.phys = CALLIOPE_ADDR(0xA0288c)}, + .int_level_2_3 = {.phys = CALLIOPE_ADDR(0xA02890)}, + .int_level_2_2 = {.phys = CALLIOPE_ADDR(0xA02894)}, + .int_level_2_1 = {.phys = CALLIOPE_ADDR(0xA02898)}, + .int_level_2_0 = {.phys = CALLIOPE_ADDR(0xA0289c)}, + .int_level_1_3 = {.phys = CALLIOPE_ADDR(0xA028a0)}, + .int_level_1_2 = {.phys = CALLIOPE_ADDR(0xA028a4)}, + .int_level_1_1 = {.phys = CALLIOPE_ADDR(0xA028a8)}, + .int_level_1_0 = {.phys = CALLIOPE_ADDR(0xA028ac)}, + .int_level_0_3 = {.phys = CALLIOPE_ADDR(0xA028b0)}, + .int_level_0_2 = {.phys = CALLIOPE_ADDR(0xA028b4)}, + .int_level_0_1 = {.phys = CALLIOPE_ADDR(0xA028b8)}, + .int_level_0_0 = {.phys = CALLIOPE_ADDR(0xA028bc)}, + .int_docsis_en = {.phys = CALLIOPE_ADDR(0xA028F4)}, - .mips_pll_setup = 0x980000, - .usb_fs = 0x980030, /* -default 72800028- */ - .test_bus = 0x9800CC, - .crt_spare = 0x9800d4, - .usb2_ohci_int_mask = 0x9A000c, - .usb2_strap = 0x9A0014, - .ehci_hcapbase = 0x9BFE00, - .ohci_hc_revision = 0x9BFC00, - .bcm1_bs_lmi_steer = 0x9E0004, - .usb2_control = 0x9E0054, - .usb2_stbus_obc = 0x9BFF00, - .usb2_stbus_mess_size = 0x9BFF04, - .usb2_stbus_chunk_size = 0x9BFF08, + .mips_pll_setup = {.phys = CALLIOPE_ADDR(0x980000)}, + .usb_fs = {.phys = CALLIOPE_ADDR(0x980030)}, + .test_bus = {.phys = CALLIOPE_ADDR(0x9800CC)}, + .crt_spare = {.phys = CALLIOPE_ADDR(0x9800d4)}, + .usb2_ohci_int_mask = {.phys = CALLIOPE_ADDR(0x9A000c)}, + .usb2_strap = {.phys = CALLIOPE_ADDR(0x9A0014)}, + .ehci_hcapbase = {.phys = CALLIOPE_ADDR(0x9BFE00)}, + .ohci_hc_revision = {.phys = CALLIOPE_ADDR(0x9BFC00)}, + .bcm1_bs_lmi_steer = {.phys = CALLIOPE_ADDR(0x9E0004)}, + .usb2_control = {.phys = CALLIOPE_ADDR(0x9E0054)}, + .usb2_stbus_obc = {.phys = CALLIOPE_ADDR(0x9BFF00)}, + .usb2_stbus_mess_size = {.phys = CALLIOPE_ADDR(0x9BFF04)}, + .usb2_stbus_chunk_size = {.phys = CALLIOPE_ADDR(0x9BFF08)}, - .pcie_regs = 0x000000, /* -doesn't exist- */ - .tim_ch = 0xA02C10, - .tim_cl = 0xA02C14, - .gpio_dout = 0xA02c20, - .gpio_din = 0xA02c24, - .gpio_dir = 0xA02c2C, - .watchdog = 0xA02c30, - .front_panel = 0x000000, /* -not used- */ + .pcie_regs = {.phys = 0x000000}, /* -doesn't exist- */ + .tim_ch = {.phys = CALLIOPE_ADDR(0xA02C10)}, + .tim_cl = {.phys = CALLIOPE_ADDR(0xA02C14)}, + .gpio_dout = {.phys = CALLIOPE_ADDR(0xA02c20)}, + .gpio_din = {.phys = CALLIOPE_ADDR(0xA02c24)}, + .gpio_dir = {.phys = CALLIOPE_ADDR(0xA02c2C)}, + .watchdog = {.phys = CALLIOPE_ADDR(0xA02c30)}, + .front_panel = {.phys = 0x000000}, /* -not used- */ }; diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c index 5f4589c9f83d..5bb64bfb508b 100644 --- a/arch/mips/powertv/asic/asic-cronus.c +++ b/arch/mips/powertv/asic/asic-cronus.c @@ -23,76 +23,79 @@ * Description: Defines the platform resources for the SA settop. */ +#include #include -const struct register_map cronus_register_map = { - .eic_slow0_strt_add = 0x000000, - .eic_cfg_bits = 0x000038, - .eic_ready_status = 0x00004C, +#define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x)) - .chipver3 = 0x2A0800, - .chipver2 = 0x2A0804, - .chipver1 = 0x2A0808, - .chipver0 = 0x2A080C, +const struct register_map cronus_register_map __initdata = { + .eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)}, + .eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)}, + .eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)}, + + .chipver3 = {.phys = CRONUS_ADDR(0x2A0800)}, + .chipver2 = {.phys = CRONUS_ADDR(0x2A0804)}, + .chipver1 = {.phys = CRONUS_ADDR(0x2A0808)}, + .chipver0 = {.phys = CRONUS_ADDR(0x2A080C)}, /* The registers of IRBlaster */ - .uart1_intstat = 0x2A1800, - .uart1_inten = 0x2A1804, - .uart1_config1 = 0x2A1808, - .uart1_config2 = 0x2A180C, - .uart1_divisorhi = 0x2A1810, - .uart1_divisorlo = 0x2A1814, - .uart1_data = 0x2A1818, - .uart1_status = 0x2A181C, + .uart1_intstat = {.phys = CRONUS_ADDR(0x2A1800)}, + .uart1_inten = {.phys = CRONUS_ADDR(0x2A1804)}, + .uart1_config1 = {.phys = CRONUS_ADDR(0x2A1808)}, + .uart1_config2 = {.phys = CRONUS_ADDR(0x2A180C)}, + .uart1_divisorhi = {.phys = CRONUS_ADDR(0x2A1810)}, + .uart1_divisorlo = {.phys = CRONUS_ADDR(0x2A1814)}, + .uart1_data = {.phys = CRONUS_ADDR(0x2A1818)}, + .uart1_status = {.phys = CRONUS_ADDR(0x2A181C)}, - .int_stat_3 = 0x2A2800, - .int_stat_2 = 0x2A2804, - .int_stat_1 = 0x2A2808, - .int_stat_0 = 0x2A280C, - .int_config = 0x2A2810, - .int_int_scan = 0x2A2818, - .ien_int_3 = 0x2A2830, - .ien_int_2 = 0x2A2834, - .ien_int_1 = 0x2A2838, - .ien_int_0 = 0x2A283C, - .int_level_3_3 = 0x2A2880, - .int_level_3_2 = 0x2A2884, - .int_level_3_1 = 0x2A2888, - .int_level_3_0 = 0x2A288C, - .int_level_2_3 = 0x2A2890, - .int_level_2_2 = 0x2A2894, - .int_level_2_1 = 0x2A2898, - .int_level_2_0 = 0x2A289C, - .int_level_1_3 = 0x2A28A0, - .int_level_1_2 = 0x2A28A4, - .int_level_1_1 = 0x2A28A8, - .int_level_1_0 = 0x2A28AC, - .int_level_0_3 = 0x2A28B0, - .int_level_0_2 = 0x2A28B4, - .int_level_0_1 = 0x2A28B8, - .int_level_0_0 = 0x2A28BC, - .int_docsis_en = 0x2A28F4, + .int_stat_3 = {.phys = CRONUS_ADDR(0x2A2800)}, + .int_stat_2 = {.phys = CRONUS_ADDR(0x2A2804)}, + .int_stat_1 = {.phys = CRONUS_ADDR(0x2A2808)}, + .int_stat_0 = {.phys = CRONUS_ADDR(0x2A280C)}, + .int_config = {.phys = CRONUS_ADDR(0x2A2810)}, + .int_int_scan = {.phys = CRONUS_ADDR(0x2A2818)}, + .ien_int_3 = {.phys = CRONUS_ADDR(0x2A2830)}, + .ien_int_2 = {.phys = CRONUS_ADDR(0x2A2834)}, + .ien_int_1 = {.phys = CRONUS_ADDR(0x2A2838)}, + .ien_int_0 = {.phys = CRONUS_ADDR(0x2A283C)}, + .int_level_3_3 = {.phys = CRONUS_ADDR(0x2A2880)}, + .int_level_3_2 = {.phys = CRONUS_ADDR(0x2A2884)}, + .int_level_3_1 = {.phys = CRONUS_ADDR(0x2A2888)}, + .int_level_3_0 = {.phys = CRONUS_ADDR(0x2A288C)}, + .int_level_2_3 = {.phys = CRONUS_ADDR(0x2A2890)}, + .int_level_2_2 = {.phys = CRONUS_ADDR(0x2A2894)}, + .int_level_2_1 = {.phys = CRONUS_ADDR(0x2A2898)}, + .int_level_2_0 = {.phys = CRONUS_ADDR(0x2A289C)}, + .int_level_1_3 = {.phys = CRONUS_ADDR(0x2A28A0)}, + .int_level_1_2 = {.phys = CRONUS_ADDR(0x2A28A4)}, + .int_level_1_1 = {.phys = CRONUS_ADDR(0x2A28A8)}, + .int_level_1_0 = {.phys = CRONUS_ADDR(0x2A28AC)}, + .int_level_0_3 = {.phys = CRONUS_ADDR(0x2A28B0)}, + .int_level_0_2 = {.phys = CRONUS_ADDR(0x2A28B4)}, + .int_level_0_1 = {.phys = CRONUS_ADDR(0x2A28B8)}, + .int_level_0_0 = {.phys = CRONUS_ADDR(0x2A28BC)}, + .int_docsis_en = {.phys = CRONUS_ADDR(0x2A28F4)}, - .mips_pll_setup = 0x1C0000, - .usb_fs = 0x1C0018, - .test_bus = 0x1C00CC, - .crt_spare = 0x1c00d4, - .usb2_ohci_int_mask = 0x20000C, - .usb2_strap = 0x200014, - .ehci_hcapbase = 0x21FE00, - .ohci_hc_revision = 0x1E0000, - .bcm1_bs_lmi_steer = 0x2E0008, - .usb2_control = 0x2E004C, - .usb2_stbus_obc = 0x21FF00, - .usb2_stbus_mess_size = 0x21FF04, - .usb2_stbus_chunk_size = 0x21FF08, + .mips_pll_setup = {.phys = CRONUS_ADDR(0x1C0000)}, + .usb_fs = {.phys = CRONUS_ADDR(0x1C0018)}, + .test_bus = {.phys = CRONUS_ADDR(0x1C00CC)}, + .crt_spare = {.phys = CRONUS_ADDR(0x1c00d4)}, + .usb2_ohci_int_mask = {.phys = CRONUS_ADDR(0x20000C)}, + .usb2_strap = {.phys = CRONUS_ADDR(0x200014)}, + .ehci_hcapbase = {.phys = CRONUS_ADDR(0x21FE00)}, + .ohci_hc_revision = {.phys = CRONUS_ADDR(0x1E0000)}, + .bcm1_bs_lmi_steer = {.phys = CRONUS_ADDR(0x2E0008)}, + .usb2_control = {.phys = CRONUS_ADDR(0x2E004C)}, + .usb2_stbus_obc = {.phys = CRONUS_ADDR(0x21FF00)}, + .usb2_stbus_mess_size = {.phys = CRONUS_ADDR(0x21FF04)}, + .usb2_stbus_chunk_size = {.phys = CRONUS_ADDR(0x21FF08)}, - .pcie_regs = 0x220000, - .tim_ch = 0x2A2C10, - .tim_cl = 0x2A2C14, - .gpio_dout = 0x2A2C20, - .gpio_din = 0x2A2C24, - .gpio_dir = 0x2A2C2C, - .watchdog = 0x2A2C30, - .front_panel = 0x2A3800, + .pcie_regs = {.phys = CRONUS_ADDR(0x220000)}, + .tim_ch = {.phys = CRONUS_ADDR(0x2A2C10)}, + .tim_cl = {.phys = CRONUS_ADDR(0x2A2C14)}, + .gpio_dout = {.phys = CRONUS_ADDR(0x2A2C20)}, + .gpio_din = {.phys = CRONUS_ADDR(0x2A2C24)}, + .gpio_dir = {.phys = CRONUS_ADDR(0x2A2C2C)}, + .watchdog = {.phys = CRONUS_ADDR(0x2A2C30)}, + .front_panel = {.phys = CRONUS_ADDR(0x2A3800)}, }; diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c index 1469daab920e..095cbe10ebb9 100644 --- a/arch/mips/powertv/asic/asic-zeus.c +++ b/arch/mips/powertv/asic/asic-zeus.c @@ -23,76 +23,79 @@ * Description: Defines the platform resources for the SA settop. */ +#include #include -const struct register_map zeus_register_map = { - .eic_slow0_strt_add = 0x000000, - .eic_cfg_bits = 0x000038, - .eic_ready_status = 0x00004c, +#define ZEUS_ADDR(x) (ZEUS_IO_BASE + (x)) - .chipver3 = 0x280800, - .chipver2 = 0x280804, - .chipver1 = 0x280808, - .chipver0 = 0x28080c, +const struct register_map zeus_register_map __initdata = { + .eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)}, + .eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)}, + .eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)}, + + .chipver3 = {.phys = ZEUS_ADDR(0x280800)}, + .chipver2 = {.phys = ZEUS_ADDR(0x280804)}, + .chipver1 = {.phys = ZEUS_ADDR(0x280808)}, + .chipver0 = {.phys = ZEUS_ADDR(0x28080c)}, /* The registers of IRBlaster */ - .uart1_intstat = 0x281800, - .uart1_inten = 0x281804, - .uart1_config1 = 0x281808, - .uart1_config2 = 0x28180C, - .uart1_divisorhi = 0x281810, - .uart1_divisorlo = 0x281814, - .uart1_data = 0x281818, - .uart1_status = 0x28181C, + .uart1_intstat = {.phys = ZEUS_ADDR(0x281800)}, + .uart1_inten = {.phys = ZEUS_ADDR(0x281804)}, + .uart1_config1 = {.phys = ZEUS_ADDR(0x281808)}, + .uart1_config2 = {.phys = ZEUS_ADDR(0x28180C)}, + .uart1_divisorhi = {.phys = ZEUS_ADDR(0x281810)}, + .uart1_divisorlo = {.phys = ZEUS_ADDR(0x281814)}, + .uart1_data = {.phys = ZEUS_ADDR(0x281818)}, + .uart1_status = {.phys = ZEUS_ADDR(0x28181C)}, - .int_stat_3 = 0x282800, - .int_stat_2 = 0x282804, - .int_stat_1 = 0x282808, - .int_stat_0 = 0x28280c, - .int_config = 0x282810, - .int_int_scan = 0x282818, - .ien_int_3 = 0x282830, - .ien_int_2 = 0x282834, - .ien_int_1 = 0x282838, - .ien_int_0 = 0x28283c, - .int_level_3_3 = 0x282880, - .int_level_3_2 = 0x282884, - .int_level_3_1 = 0x282888, - .int_level_3_0 = 0x28288c, - .int_level_2_3 = 0x282890, - .int_level_2_2 = 0x282894, - .int_level_2_1 = 0x282898, - .int_level_2_0 = 0x28289c, - .int_level_1_3 = 0x2828a0, - .int_level_1_2 = 0x2828a4, - .int_level_1_1 = 0x2828a8, - .int_level_1_0 = 0x2828ac, - .int_level_0_3 = 0x2828b0, - .int_level_0_2 = 0x2828b4, - .int_level_0_1 = 0x2828b8, - .int_level_0_0 = 0x2828bc, - .int_docsis_en = 0x2828F4, + .int_stat_3 = {.phys = ZEUS_ADDR(0x282800)}, + .int_stat_2 = {.phys = ZEUS_ADDR(0x282804)}, + .int_stat_1 = {.phys = ZEUS_ADDR(0x282808)}, + .int_stat_0 = {.phys = ZEUS_ADDR(0x28280c)}, + .int_config = {.phys = ZEUS_ADDR(0x282810)}, + .int_int_scan = {.phys = ZEUS_ADDR(0x282818)}, + .ien_int_3 = {.phys = ZEUS_ADDR(0x282830)}, + .ien_int_2 = {.phys = ZEUS_ADDR(0x282834)}, + .ien_int_1 = {.phys = ZEUS_ADDR(0x282838)}, + .ien_int_0 = {.phys = ZEUS_ADDR(0x28283c)}, + .int_level_3_3 = {.phys = ZEUS_ADDR(0x282880)}, + .int_level_3_2 = {.phys = ZEUS_ADDR(0x282884)}, + .int_level_3_1 = {.phys = ZEUS_ADDR(0x282888)}, + .int_level_3_0 = {.phys = ZEUS_ADDR(0x28288c)}, + .int_level_2_3 = {.phys = ZEUS_ADDR(0x282890)}, + .int_level_2_2 = {.phys = ZEUS_ADDR(0x282894)}, + .int_level_2_1 = {.phys = ZEUS_ADDR(0x282898)}, + .int_level_2_0 = {.phys = ZEUS_ADDR(0x28289c)}, + .int_level_1_3 = {.phys = ZEUS_ADDR(0x2828a0)}, + .int_level_1_2 = {.phys = ZEUS_ADDR(0x2828a4)}, + .int_level_1_1 = {.phys = ZEUS_ADDR(0x2828a8)}, + .int_level_1_0 = {.phys = ZEUS_ADDR(0x2828ac)}, + .int_level_0_3 = {.phys = ZEUS_ADDR(0x2828b0)}, + .int_level_0_2 = {.phys = ZEUS_ADDR(0x2828b4)}, + .int_level_0_1 = {.phys = ZEUS_ADDR(0x2828b8)}, + .int_level_0_0 = {.phys = ZEUS_ADDR(0x2828bc)}, + .int_docsis_en = {.phys = ZEUS_ADDR(0x2828F4)}, - .mips_pll_setup = 0x1a0000, - .usb_fs = 0x1a0018, - .test_bus = 0x1a0238, - .crt_spare = 0x1a0090, - .usb2_ohci_int_mask = 0x1e000c, - .usb2_strap = 0x1e0014, - .ehci_hcapbase = 0x1FFE00, - .ohci_hc_revision = 0x1FFC00, - .bcm1_bs_lmi_steer = 0x2C0008, - .usb2_control = 0x2c01a0, - .usb2_stbus_obc = 0x1FFF00, - .usb2_stbus_mess_size = 0x1FFF04, - .usb2_stbus_chunk_size = 0x1FFF08, + .mips_pll_setup = {.phys = ZEUS_ADDR(0x1a0000)}, + .usb_fs = {.phys = ZEUS_ADDR(0x1a0018)}, + .test_bus = {.phys = ZEUS_ADDR(0x1a0238)}, + .crt_spare = {.phys = ZEUS_ADDR(0x1a0090)}, + .usb2_ohci_int_mask = {.phys = ZEUS_ADDR(0x1e000c)}, + .usb2_strap = {.phys = ZEUS_ADDR(0x1e0014)}, + .ehci_hcapbase = {.phys = ZEUS_ADDR(0x1FFE00)}, + .ohci_hc_revision = {.phys = ZEUS_ADDR(0x1FFC00)}, + .bcm1_bs_lmi_steer = {.phys = ZEUS_ADDR(0x2C0008)}, + .usb2_control = {.phys = ZEUS_ADDR(0x2c01a0)}, + .usb2_stbus_obc = {.phys = ZEUS_ADDR(0x1FFF00)}, + .usb2_stbus_mess_size = {.phys = ZEUS_ADDR(0x1FFF04)}, + .usb2_stbus_chunk_size = {.phys = ZEUS_ADDR(0x1FFF08)}, - .pcie_regs = 0x200000, - .tim_ch = 0x282C10, - .tim_cl = 0x282C14, - .gpio_dout = 0x282c20, - .gpio_din = 0x282c24, - .gpio_dir = 0x282c2C, - .watchdog = 0x282c30, - .front_panel = 0x283800, + .pcie_regs = {.phys = ZEUS_ADDR(0x200000)}, + .tim_ch = {.phys = ZEUS_ADDR(0x282C10)}, + .tim_cl = {.phys = ZEUS_ADDR(0x282C14)}, + .gpio_dout = {.phys = ZEUS_ADDR(0x282c20)}, + .gpio_din = {.phys = ZEUS_ADDR(0x282c24)}, + .gpio_dir = {.phys = ZEUS_ADDR(0x282c2C)}, + .watchdog = {.phys = ZEUS_ADDR(0x282c30)}, + .front_panel = {.phys = ZEUS_ADDR(0x283800)}, }; diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c index bae82880b6b5..6a882194e063 100644 --- a/arch/mips/powertv/asic/asic_devices.c +++ b/arch/mips/powertv/asic/asic_devices.c @@ -67,8 +67,8 @@ enum asic_type asic; unsigned int platform_features; unsigned int platform_family; -const struct register_map *register_map; -EXPORT_SYMBOL(register_map); /* Exported for testing */ +struct register_map _asic_register_map; +EXPORT_SYMBOL(_asic_register_map); /* Exported for testing */ unsigned long asic_phy_base; unsigned long asic_base; EXPORT_SYMBOL(asic_base); /* Exported for testing */ @@ -418,6 +418,15 @@ void platform_unconfigure_usb_ohci() { } +static void __init set_register_map(unsigned long phys_base, + const struct register_map *map) +{ + asic_phy_base = phys_base; + _asic_register_map = *map; + register_map_virtualize(&_asic_register_map); + asic_base = (unsigned long)ioremap_nocache(phys_base, ASIC_IO_SIZE); +} + /** * configure_platform - configuration based on platform type. */ @@ -431,10 +440,7 @@ void __init configure_platform(void) case FAMILY_1500VZF: platform_features = FFS_CAPABLE; asic = ASIC_CALLIOPE; - asic_phy_base = CALLIOPE_IO_BASE; - register_map = &calliope_register_map; - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); + set_register_map(CALLIOPE_IO_BASE, &calliope_register_map); if (platform_family == FAMILY_1500VZE) { gp_resources = non_dvr_vze_calliope_resources; @@ -455,10 +461,7 @@ void __init configure_platform(void) platform_features = FFS_CAPABLE | PCIE_CAPABLE | DISPLAY_CAPABLE; asic = ASIC_ZEUS; - asic_phy_base = ZEUS_IO_BASE; - register_map = &zeus_register_map; - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); + set_register_map(ZEUS_IO_BASE, &zeus_register_map); gp_resources = non_dvr_zeus_resources; pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n"); @@ -471,11 +474,6 @@ void __init configure_platform(void) /* The settop has PCIE but it isn't used, so don't advertise * it*/ platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; - asic_phy_base = CRONUS_IO_BASE; /* same as Cronus */ - register_map = &cronus_register_map; /* same as Cronus */ - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); - gp_resources = non_dvr_cronuslite_resources; /* ASIC version will determine if this is a real CronusLite or * Castrati(Cronus) */ @@ -489,6 +487,9 @@ void __init configure_platform(void) else asic = ASIC_CRONUSLITE; + /* Cronus and Cronus Lite have the same register map */ + set_register_map(CRONUS_IO_BASE, &cronus_register_map); + gp_resources = non_dvr_cronuslite_resources; pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, " "chipversion=0x%08X\n", (asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE", @@ -498,10 +499,7 @@ void __init configure_platform(void) case FAMILY_4600VZA: platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; asic = ASIC_CRONUS; - asic_phy_base = CRONUS_IO_BASE; - register_map = &cronus_register_map; - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); + set_register_map(CRONUS_IO_BASE, &cronus_register_map); gp_resources = non_dvr_cronus_resources; pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n"); @@ -512,10 +510,7 @@ void __init configure_platform(void) platform_features = DVR_CAPABLE | PCIE_CAPABLE | DISPLAY_CAPABLE; asic = ASIC_ZEUS; - asic_phy_base = ZEUS_IO_BASE; - register_map = &zeus_register_map; - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); + set_register_map(ZEUS_IO_BASE, &zeus_register_map); gp_resources = dvr_zeus_resources; pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n"); @@ -526,10 +521,7 @@ void __init configure_platform(void) platform_features = DVR_CAPABLE | PCIE_CAPABLE | DISPLAY_CAPABLE; asic = ASIC_CRONUS; - asic_phy_base = CRONUS_IO_BASE; - register_map = &cronus_register_map; - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); + set_register_map(CRONUS_IO_BASE, &cronus_register_map); gp_resources = dvr_cronus_resources; pr_info("Platform: 8600/Vz Class B - CRONUS, " From 010c108d7af708d9e09b83724a058a76803fbc66 Mon Sep 17 00:00:00 2001 From: David VomLehn Date: Mon, 21 Dec 2009 17:49:22 -0800 Subject: [PATCH 1451/1626] MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs The MIPS processor is limited to 64 external interrupt sources. Using a greater number without IRQ sharing requires reading platform-specific registers. On such platforms, reading the IntCtl register to determine which interrupt corresponds to a timer interrupt will not work. On MIPSR2 systems there is a solution - the TI bit in the Cause register, specifically indicates that a timer interrupt has occured. This patch uses that bit to detect interrupts for MIPSR2 processors, which may be expected to work regardless of how the timer interrupt may be routed in the hardware. Signed-off-by: David VomLehn (dvomlehn@cisco.com) To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/804/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/irq.h | 1 + arch/mips/include/asm/mipsregs.h | 12 ++++++++++++ arch/mips/kernel/cevt-r4k.c | 2 +- arch/mips/kernel/traps.c | 6 ++++-- 4 files changed, 18 insertions(+), 3 deletions(-) diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h index 06960364c96b..dea4aed6478f 100644 --- a/arch/mips/include/asm/irq.h +++ b/arch/mips/include/asm/irq.h @@ -135,6 +135,7 @@ extern void free_irqno(unsigned int irq); #define CP0_LEGACY_COMPARE_IRQ 7 extern int cp0_compare_irq; +extern int cp0_compare_irq_shift; extern int cp0_perfcount_irq; #endif /* _ASM_IRQ_H */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index a581d60cbcc2..f4ab3139d737 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -405,6 +405,16 @@ #define ST0_CU3 0x80000000 #define ST0_XX 0x80000000 /* MIPS IV naming */ +/* + * Bitfields and bit numbers in the coprocessor 0 IntCtl register. (MIPSR2) + * + * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. + */ +#define INTCTLB_IPPCI 26 +#define INTCTLF_IPPCI (_ULCAST_(7) << INTCTLB_IPPCI) +#define INTCTLB_IPTI 29 +#define INTCTLF_IPTI (_ULCAST_(7) << INTCTLB_IPTI) + /* * Bitfields and bit numbers in the coprocessor 0 cause register. * @@ -434,6 +444,8 @@ #define CAUSEF_IV (_ULCAST_(1) << 23) #define CAUSEB_CE 28 #define CAUSEF_CE (_ULCAST_(3) << 28) +#define CAUSEB_TI 30 +#define CAUSEF_TI (_ULCAST_(1) << 30) #define CAUSEB_BD 31 #define CAUSEF_BD (_ULCAST_(1) << 31) diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index b469ad05d520..0b2450ceb13f 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -97,7 +97,7 @@ void mips_event_handler(struct clock_event_device *dev) */ static int c0_compare_int_pending(void) { - return (read_c0_cause() >> cp0_compare_irq) & 0x100; + return (read_c0_cause() >> cp0_compare_irq_shift) & (1ul << CAUSEB_IP); } /* diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 308e43460864..338dfe8ed002 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1403,6 +1403,7 @@ extern void flush_tlb_handlers(void); * Timer interrupt */ int cp0_compare_irq; +int cp0_compare_irq_shift; /* * Performance counter IRQ or -1 if shared with timer @@ -1493,8 +1494,9 @@ void __cpuinit per_cpu_trap_init(void) * o read IntCtl.IPPCI to determine the performance counter interrupt */ if (cpu_has_mips_r2) { - cp0_compare_irq = (read_c0_intctl() >> 29) & 7; - cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7; + cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP; + cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7; + cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7; if (cp0_perfcount_irq == cp0_compare_irq) cp0_perfcount_irq = -1; } else { From 35ea63d70f827a26c150993b4b940925bb02b03f Mon Sep 17 00:00:00 2001 From: Leann Ogasawara Date: Wed, 27 Jan 2010 15:29:18 -0800 Subject: [PATCH 1452/1626] x86: Add Dell OptiPlex 760 reboot quirk Dell OptiPlex 760 hangs on reboot unless reboot=bios is used. Add quirk to reboot through the BIOS. BugLink: https://bugs.launchpad.net/bugs/488319 Signed-off-by: Leann Ogasawara LKML-Reference: <1264634958.27335.1091.camel@emiko> Cc: Signed-off-by: H. Peter Anvin --- arch/x86/kernel/reboot.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 1545bc0c9845..704bddcdf64d 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -203,6 +203,15 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "0T656F"), }, }, + { /* Handle problems with rebooting on Dell OptiPlex 760 with 0G919G*/ + .callback = set_bios_reboot, + .ident = "Dell OptiPlex 760", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 760"), + DMI_MATCH(DMI_BOARD_NAME, "0G919G"), + }, + }, { /* Handle problems with rebooting on Dell 2400's */ .callback = set_bios_reboot, .ident = "Dell PowerEdge 2400", From 11854247e2c851e7ff9ce138e501c6cffc5a4217 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 21 Jan 2010 16:34:27 +0100 Subject: [PATCH 1453/1626] sched: Fix incorrect sanity check We moved to migrate on wakeup, which means that sleeping tasks could still be present on offline cpus. Amend the check to only test running tasks. Reported-by: Heiko Carstens Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/cpu.c b/kernel/cpu.c index 1c8ddd6ee940..08e54e7beaed 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -151,7 +151,7 @@ static inline void check_for_tasks(int cpu) write_lock_irq(&tasklist_lock); for_each_process(p) { - if (task_cpu(p) == cpu && + if (task_cpu(p) == cpu && p->state == TASK_RUNNING && (!cputime_eq(p->utime, cputime_zero) || !cputime_eq(p->stime, cputime_zero))) printk(KERN_WARNING "Task %s (pid = %d) is on cpu %d\ From 9d3cfc4c1d17c6d3bc1373e3b954c56b92607755 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Mon, 25 Jan 2010 14:56:34 +0100 Subject: [PATCH 1454/1626] sched: Correct printk whitespace in warning from cpu down task check Due to an incorrect line break the output currently contains tabs. Also remove trailing space. The actual output that logcheck sent me looked like this: Task events/1 (pid = 10) is on cpu 1^I^I^I^I(state = 1, flags = 84208040) After this patch it becomes: Task events/1 (pid = 10) is on cpu 1 (state = 1, flags = 84208040) Signed-off-by: Frans Pop Signed-off-by: Peter Zijlstra LKML-Reference: <201001251456.34996.elendil@planet.nl> Signed-off-by: Ingo Molnar --- kernel/cpu.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/kernel/cpu.c b/kernel/cpu.c index 08e54e7beaed..677f25376a38 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -154,10 +154,10 @@ static inline void check_for_tasks(int cpu) if (task_cpu(p) == cpu && p->state == TASK_RUNNING && (!cputime_eq(p->utime, cputime_zero) || !cputime_eq(p->stime, cputime_zero))) - printk(KERN_WARNING "Task %s (pid = %d) is on cpu %d\ - (state = %ld, flags = %x) \n", - p->comm, task_pid_nr(p), cpu, - p->state, p->flags); + printk(KERN_WARNING "Task %s (pid = %d) is on cpu %d " + "(state = %ld, flags = %x)\n", + p->comm, task_pid_nr(p), cpu, + p->state, p->flags); } write_unlock_irq(&tasklist_lock); } From 57b5e2ae5b5f6b687ef2c644b1cb06bd217cdbe7 Mon Sep 17 00:00:00 2001 From: Jon Dodgson Date: Thu, 28 Jan 2010 00:07:45 -0800 Subject: [PATCH 1455/1626] Input: lifebook - add another Lifebook DMI signature There are many many ways one can capitalize "Lifebook B Series"... Signed-off-by: Jon Dodgson Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/lifebook.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index 6d7aa10d10f0..7c1d7d420ae3 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -50,6 +50,12 @@ static const struct dmi_system_id __initconst lifebook_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "FLORA-ie 55mi"), }, }, + { + /* LifeBook B */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Lifebook B Series"), + }, + }, { /* LifeBook B */ .matches = { From bbec919150037b8a2e58e32d3ba642ba3b6582a5 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 28 Jan 2010 13:43:50 +0100 Subject: [PATCH 1456/1626] reiserfs: Fix vmalloc call under reiserfs lock Vmalloc is called to allocate journal->j_cnode_free_list but we hold the reiserfs lock at this time, which raises a {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} lock inversion. Just drop the reiserfs lock at this time, as it's not even needed but kept for paranoid reasons. This fixes: [ INFO: inconsistent lock state ] 2.6.33-rc5 #1 --------------------------------- inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd0/313 [HC0[0]:SC0[0]:HE1:SE1] takes: (&REISERFS_SB(s)->lock){+.+.?.}, at: [] reiserfs_write_lock_once+0x28/0x50 {RECLAIM_FS-ON-W} state was registered at: [] mark_held_locks+0x62/0x90 [] lockdep_trace_alloc+0x9a/0xc0 [] kmem_cache_alloc+0x26/0xf0 [] __get_vm_area_node+0x6c/0xf0 [] __vmalloc_node+0x7e/0xa0 [] vmalloc+0x2b/0x30 [] journal_init+0x6cb/0xa10 [] reiserfs_fill_super+0x342/0xb80 [] get_sb_bdev+0x145/0x180 [] get_super_block+0x21/0x30 [] vfs_kern_mount+0x40/0xd0 [] do_kern_mount+0x39/0xd0 [] do_mount+0x2c7/0x6d0 [] sys_mount+0x66/0xa0 [] mount_block_root+0xc4/0x245 [] mount_root+0x59/0x5f [] prepare_namespace+0x111/0x14b [] kernel_init+0xcf/0xdb [] kernel_thread_helper+0x6/0x1c irq event stamp: 63236801 hardirqs last enabled at (63236801): [] __mutex_unlock_slowpath+0x9a/0x120 hardirqs last disabled at (63236800): [] __mutex_unlock_slowpath+0x39/0x120 softirqs last enabled at (63218800): [] __do_softirq+0xc1/0x110 softirqs last disabled at (63218789): [] do_softirq+0x4d/0x60 other info that might help us debug this: 2 locks held by kswapd0/313: #0: (shrinker_rwsem){++++..}, at: [] shrink_slab+0x24/0x170 #1: (&type->s_umount_key#19){++++..}, at: [] shrink_dcache_memory+0xfd/0x1a0 stack backtrace: Pid: 313, comm: kswapd0 Not tainted 2.6.33-rc5 #1 Call Trace: [] ? printk+0x18/0x1c [] print_usage_bug+0x15f/0x1a0 [] mark_lock+0x39f/0x5a0 [] ? trace_hardirqs_off+0xb/0x10 [] ? check_usage_forwards+0x0/0xf0 [] __lock_acquire+0x214/0xa70 [] ? sched_clock_cpu+0x95/0x110 [] lock_acquire+0x7a/0xa0 [] ? reiserfs_write_lock_once+0x28/0x50 [] mutex_lock_nested+0x5f/0x2b0 [] ? reiserfs_write_lock_once+0x28/0x50 [] ? reiserfs_write_lock_once+0x28/0x50 [] reiserfs_write_lock_once+0x28/0x50 [] reiserfs_delete_inode+0x50/0x140 [] ? generic_delete_inode+0x5f/0x150 [] ? reiserfs_delete_inode+0x0/0x140 [] generic_delete_inode+0x9c/0x150 [] generic_drop_inode+0x3d/0x60 [] iput+0x47/0x50 [] dentry_iput+0x6f/0xf0 [] d_kill+0x24/0x50 [] __shrink_dcache_sb+0x21d/0x2b0 [] shrink_dcache_memory+0x12f/0x1a0 [] shrink_slab+0x10e/0x170 [] kswapd+0x477/0x6a0 [] ? isolate_pages_global+0x0/0x1b0 [] ? autoremove_wake_function+0x0/0x40 [] ? kswapd+0x0/0x6a0 [] kthread+0x6c/0x80 [] ? kthread+0x0/0x80 [] kernel_thread_helper+0x6/0x1c Reported-by: Alexander Beregalov Signed-off-by: Frederic Weisbecker Cc: Christian Kujau Cc: Chris Mason --- fs/reiserfs/journal.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index 83ac4d3b3cb0..ba98546fabbd 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -2913,7 +2913,9 @@ int journal_init(struct super_block *sb, const char *j_dev_name, journal->j_mount_id = 10; journal->j_state = 0; atomic_set(&(journal->j_jlock), 0); + reiserfs_write_unlock(sb); journal->j_cnode_free_list = allocate_cnodes(num_cnodes); + reiserfs_write_lock(sb); journal->j_cnode_free_orig = journal->j_cnode_free_list; journal->j_cnode_free = journal->j_cnode_free_list ? num_cnodes : 0; journal->j_cnode_used = 0; From b23ff0e9330e4b11e18af984d50573598e10e7f9 Mon Sep 17 00:00:00 2001 From: Mahesh Salgaonkar Date: Thu, 21 Jan 2010 18:25:16 +0530 Subject: [PATCH 1457/1626] hw_breakpoints: Release the bp slot if arch_validate_hwbkpt_settings() fails. On a given architecture, when hardware breakpoint registration fails due to un-supported access type (read/write/execute), we lose the bp slot since register_perf_hw_breakpoint() does not release the bp slot on failure. Hence, any subsequent hardware breakpoint registration starts failing with 'no space left on device' error. This patch introduces error handling in register_perf_hw_breakpoint() function and releases bp slot on error. Signed-off-by: Mahesh Salgaonkar Cc: Ananth N Mavinakayanahalli Cc: K. Prasad Cc: Maneesh Soni LKML-Reference: <20100121125516.GA32521@in.ibm.com> Signed-off-by: Frederic Weisbecker --- kernel/hw_breakpoint.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c index 50dbd5999588..c030ae657f20 100644 --- a/kernel/hw_breakpoint.c +++ b/kernel/hw_breakpoint.c @@ -296,6 +296,10 @@ int register_perf_hw_breakpoint(struct perf_event *bp) if (!bp->attr.disabled || !bp->overflow_handler) ret = arch_validate_hwbkpt_settings(bp, bp->ctx->task); + /* if arch_validate_hwbkpt_settings() fails then release bp slot */ + if (ret) + release_bp_slot(bp); + return ret; } From 7b139c83c590d4965259aad8889cbb08104b2891 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Wed, 27 Jan 2010 21:56:44 +0000 Subject: [PATCH 1458/1626] be2net: Bug fix to support newer generation of BE ASIC Bug fix in be2net for newer generation of BladeEngine ASIC. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be.h | 5 +++++ drivers/net/benet/be_cmds.h | 3 ++- drivers/net/benet/be_main.c | 25 +++++++++++++++++++++++-- 3 files changed, 30 insertions(+), 3 deletions(-) diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index 9fd8e5ecd5d7..5bc74590c73e 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -276,8 +276,13 @@ struct be_adapter { int link_speed; u8 port_type; u8 transceiver; + u8 generation; /* BladeEngine ASIC generation */ }; +/* BladeEngine Generation numbers */ +#define BE_GEN2 2 +#define BE_GEN3 3 + extern const struct ethtool_ops be_ethtool_ops; #define drvr_stats(adapter) (&adapter->stats.drvr_stats) diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index c002b8391b4d..13b33c841083 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -164,7 +164,8 @@ struct be_cmd_req_hdr { u8 domain; /* dword 0 */ u32 timeout; /* dword 1 */ u32 request_length; /* dword 2 */ - u32 rsvd; /* dword 3 */ + u8 version; /* dword 3 */ + u8 rsvd[3]; /* dword 3 */ }; #define RESP_HDR_INFO_OPCODE_SHIFT 0 /* bits 0 - 7 */ diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 33ab8c7f14fe..90c5661b336f 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -2051,6 +2051,7 @@ static void be_unmap_pci_bars(struct be_adapter *adapter) static int be_map_pci_bars(struct be_adapter *adapter) { u8 __iomem *addr; + int pcicfg_reg; addr = ioremap_nocache(pci_resource_start(adapter->pdev, 2), pci_resource_len(adapter->pdev, 2)); @@ -2064,8 +2065,13 @@ static int be_map_pci_bars(struct be_adapter *adapter) goto pci_map_err; adapter->db = addr; - addr = ioremap_nocache(pci_resource_start(adapter->pdev, 1), - pci_resource_len(adapter->pdev, 1)); + if (adapter->generation == BE_GEN2) + pcicfg_reg = 1; + else + pcicfg_reg = 0; + + addr = ioremap_nocache(pci_resource_start(adapter->pdev, pcicfg_reg), + pci_resource_len(adapter->pdev, pcicfg_reg)); if (addr == NULL) goto pci_map_err; adapter->pcicfg = addr; @@ -2162,6 +2168,7 @@ static int be_stats_init(struct be_adapter *adapter) cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma); if (cmd->va == NULL) return -1; + memset(cmd->va, cmd->size, 0); return 0; } @@ -2240,6 +2247,20 @@ static int __devinit be_probe(struct pci_dev *pdev, goto rel_reg; } adapter = netdev_priv(netdev); + + switch (pdev->device) { + case BE_DEVICE_ID1: + case OC_DEVICE_ID1: + adapter->generation = BE_GEN2; + break; + case BE_DEVICE_ID2: + case OC_DEVICE_ID2: + adapter->generation = BE_GEN3; + break; + default: + adapter->generation = 0; + } + adapter->pdev = pdev; pci_set_drvdata(pdev, adapter); adapter->netdev = netdev; From aeedba8bd2cf2f6f7b45bc7853754a03bc926797 Mon Sep 17 00:00:00 2001 From: "Choi, David" Date: Wed, 27 Jan 2010 06:03:16 +0000 Subject: [PATCH 1459/1626] drivers/net: ks8851_mll ethernet network driver Hello David Miller, I fix a bug in ks8851_mll driver, which has existed since 2.6.32-rc6. >From : David J. Choi Fix a bug that the data pointers in the interrupt handler are set wrong, which is related with the 5th parameter of request_irq(). Signed-off-by : David J. Choi Signed-off-by: David S. Miller --- drivers/net/ks8851_mll.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c index c146304d8d6c..c0ceebccaa49 100644 --- a/drivers/net/ks8851_mll.c +++ b/drivers/net/ks8851_mll.c @@ -854,8 +854,8 @@ static void ks_update_link_status(struct net_device *netdev, struct ks_net *ks) static irqreturn_t ks_irq(int irq, void *pw) { - struct ks_net *ks = pw; - struct net_device *netdev = ks->netdev; + struct net_device *netdev = pw; + struct ks_net *ks = netdev_priv(netdev); u16 status; /*this should be the first in IRQ handler */ From ac26d7d6aca9621f75f6954c159d2727c9c9cbd0 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 27 Jan 2010 15:30:39 +0000 Subject: [PATCH 1460/1626] igbvf: fix issue w/ mapped_as_page being left set after unmap This change fixes an issue in igbvf with mapped_as_page being left set after a page is unmapped which results in buffers which are mapped via map single being unmapped as page. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igbvf/netdev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index 297a5ddd77f0..2aa71a766c35 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -2117,6 +2117,7 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, /* set time_stamp *before* dma to help avoid a possible race */ buffer_info->time_stamp = jiffies; buffer_info->next_to_watch = i; + buffer_info->mapped_as_page = false; buffer_info->dma = pci_map_single(pdev, skb->data, len, PCI_DMA_TODEVICE); if (pci_dma_mapping_error(pdev, buffer_info->dma)) From ebe1b30cd441b576fb9d0b42857af3e423dd5826 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Wed, 27 Jan 2010 16:37:44 +0000 Subject: [PATCH 1461/1626] ixgbe: set the correct DCB bit for pg tx settings Set the correct bit BIT_PG_TX when tx PG settings are set. Signed-off-by: John Fastabend Acked-by: PJ Waskiewicz Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_dcb_nl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index 56f37f66b696..383e799c5fed 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -223,7 +223,7 @@ static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id, if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] != adapter->dcb_cfg.bw_percentage[0][bwg_id]) { - adapter->dcb_set_bitmap |= BIT_PG_RX; + adapter->dcb_set_bitmap |= BIT_PG_TX; adapter->dcb_set_bitmap |= BIT_RESETLINK; } } From 3ce1cc52d2e76b6a6b9d0b52b70eb181497efa50 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Wed, 27 Jan 2010 16:38:06 +0000 Subject: [PATCH 1462/1626] ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early Call ixgbe_copy_dcb_cfg() earlier in the ixgbe_dcbnl_set_all() so that we can learn if this is going to fail as early as possible. Previously, ixgbe_down or ixgbe_close were being called before this check and the IXGBE_RESETTING bit was being set and cleared. Worse if this failed the corresponding ixgbe_up/ndo_open would not called. Signed-off-by: John Fastabend Acked-by: PJ Waskiewicz Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_dcb_nl.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index 383e799c5fed..dd4883f642be 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -341,6 +341,12 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) if (!adapter->dcb_set_bitmap) return DCB_NO_HW_CHG; + ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, + adapter->ring_feature[RING_F_DCB].indices); + + if (ret) + return DCB_NO_HW_CHG; + /* * Only take down the adapter if the configuration change * requires a reset. @@ -359,14 +365,6 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) } } - ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, - adapter->ring_feature[RING_F_DCB].indices); - if (ret) { - if (adapter->dcb_set_bitmap & BIT_RESETLINK) - clear_bit(__IXGBE_RESETTING, &adapter->state); - return DCB_NO_HW_CHG; - } - if (adapter->dcb_cfg.pfc_mode_enable) { if ((adapter->hw.mac.type != ixgbe_mac_82598EB) && (adapter->hw.fc.current_mode != ixgbe_fc_pfc)) From b473946a0853860e13b51c28add5524741117786 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 25 Jan 2010 23:34:15 +0000 Subject: [PATCH 1463/1626] bonding: bond_open error return value The convention for API functions in kernel is to return errno value; bond_open would return -1 if alb setup failed. The only reason that could happen is if kmalloc() failed. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 3f0071cfe56b..efa0e41bf3ec 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3639,7 +3639,7 @@ static int bond_open(struct net_device *bond_dev) */ if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) { /* something went wrong - fail the open operation */ - return -1; + return -ENOMEM; } INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor); From 1d6165851cd8e3f919d446cd6da35dee44e8837e Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Wed, 27 Jan 2010 22:44:36 +0300 Subject: [PATCH 1464/1626] block: fix bio_add_page for non trivial merge_bvec_fn case We have to properly decrease bi_size in order to merge_bvec_fn return right result. Otherwise this result in false merge rejects for two absolutely valid bio_vecs. This may cause significant performance penalty for example fs_block_size == 1k and block device is raid0 with small chunk_size = 8k. Then it is impossible to merge 7-th fs-block in to bio which already has 6 fs-blocks. Cc: Signed-off-by: Dmitry Monakhov Signed-off-by: Jens Axboe --- fs/bio.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/bio.c b/fs/bio.c index 12429c9553eb..88094afc29ea 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -542,13 +542,18 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page if (page == prev->bv_page && offset == prev->bv_offset + prev->bv_len) { + unsigned int prev_bv_len = prev->bv_len; prev->bv_len += len; if (q->merge_bvec_fn) { struct bvec_merge_data bvm = { + /* prev_bvec is already charged in + bi_size, discharge it in order to + simulate merging updated prev_bvec + as new bvec. */ .bi_bdev = bio->bi_bdev, .bi_sector = bio->bi_sector, - .bi_size = bio->bi_size, + .bi_size = bio->bi_size - prev_bv_len, .bi_rw = bio->bi_rw, }; From e8e06eae4ffd683931b928f460c11c40cd3f7fd8 Mon Sep 17 00:00:00 2001 From: Jeff Garrett Date: Wed, 27 Jan 2010 22:02:26 -0600 Subject: [PATCH 1465/1626] x86/PCI: remove IOH range fetching Turned out to cause trouble on single IOH machines, and is superceded by _CRS on multi-IOH machines with production BIOSes. Signed-off-by: Jeff Garrett Signed-off-by: Jesse Barnes --- arch/x86/pci/Makefile | 2 +- arch/x86/pci/intel_bus.c | 94 ---------------------------------------- 2 files changed, 1 insertion(+), 95 deletions(-) delete mode 100644 arch/x86/pci/intel_bus.c diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index 564b008a51c7..39fba37f702f 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_X86_NUMAQ) += numaq_32.o obj-y += common.o early.o obj-y += amd_bus.o -obj-$(CONFIG_X86_64) += bus_numa.o intel_bus.o +obj-$(CONFIG_X86_64) += bus_numa.o ifeq ($(CONFIG_PCI_DEBUG),y) EXTRA_CFLAGS += -DDEBUG diff --git a/arch/x86/pci/intel_bus.c b/arch/x86/pci/intel_bus.c deleted file mode 100644 index f81a2fa8fe25..000000000000 --- a/arch/x86/pci/intel_bus.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * to read io range from IOH pci conf, need to do it after mmconfig is there - */ - -#include -#include -#include -#include -#include - -#include "bus_numa.h" - -static inline void print_ioh_resources(struct pci_root_info *info) -{ - int res_num; - int busnum; - int i; - - printk(KERN_DEBUG "IOH bus: [%02x, %02x]\n", - info->bus_min, info->bus_max); - res_num = info->res_num; - busnum = info->bus_min; - for (i = 0; i < res_num; i++) { - struct resource *res; - - res = &info->res[i]; - printk(KERN_DEBUG "IOH bus: %02x index %x %s: [%llx, %llx]\n", - busnum, i, - (res->flags & IORESOURCE_IO) ? "io port" : - "mmio", - res->start, res->end); - } -} - -#define IOH_LIO 0x108 -#define IOH_LMMIOL 0x10c -#define IOH_LMMIOH 0x110 -#define IOH_LMMIOH_BASEU 0x114 -#define IOH_LMMIOH_LIMITU 0x118 -#define IOH_LCFGBUS 0x11c - -static void __devinit pci_root_bus_res(struct pci_dev *dev) -{ - u16 word; - u32 dword; - struct pci_root_info *info; - u16 io_base, io_end; - u32 mmiol_base, mmiol_end; - u64 mmioh_base, mmioh_end; - int bus_base, bus_end; - - /* some sys doesn't get mmconf enabled */ - if (dev->cfg_size < 0x120) - return; - - if (pci_root_num >= PCI_ROOT_NR) { - printk(KERN_DEBUG "intel_bus.c: PCI_ROOT_NR is too small\n"); - return; - } - - info = &pci_root_info[pci_root_num]; - pci_root_num++; - - pci_read_config_word(dev, IOH_LCFGBUS, &word); - bus_base = (word & 0xff); - bus_end = (word & 0xff00) >> 8; - sprintf(info->name, "PCI Bus #%02x", bus_base); - info->bus_min = bus_base; - info->bus_max = bus_end; - - pci_read_config_word(dev, IOH_LIO, &word); - io_base = (word & 0xf0) << (12 - 4); - io_end = (word & 0xf000) | 0xfff; - update_res(info, io_base, io_end, IORESOURCE_IO, 0); - - pci_read_config_dword(dev, IOH_LMMIOL, &dword); - mmiol_base = (dword & 0xff00) << (24 - 8); - mmiol_end = (dword & 0xff000000) | 0xffffff; - update_res(info, mmiol_base, mmiol_end, IORESOURCE_MEM, 0); - - pci_read_config_dword(dev, IOH_LMMIOH, &dword); - mmioh_base = ((u64)(dword & 0xfc00)) << (26 - 10); - mmioh_end = ((u64)(dword & 0xfc000000) | 0x3ffffff); - pci_read_config_dword(dev, IOH_LMMIOH_BASEU, &dword); - mmioh_base |= ((u64)(dword & 0x7ffff)) << 32; - pci_read_config_dword(dev, IOH_LMMIOH_LIMITU, &dword); - mmioh_end |= ((u64)(dword & 0x7ffff)) << 32; - update_res(info, mmioh_base, mmioh_end, IORESOURCE_MEM, 0); - - print_ioh_resources(info); -} - -/* intel IOH */ -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, pci_root_bus_res); From a555f810af6d63ea5960abaed88e150ad95c3011 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 28 Jan 2010 16:18:15 -0500 Subject: [PATCH 1466/1626] Btrfs: Add mount -o compress-force The default btrfs mount -o compress mode will quickly back off compressing a file if it notices that compression does not reduce the size of the data being written. This can save considerable CPU because all future writes to the file go through uncompressed. But some files are both very large and have mixed data stored in them. In that case, we want to add the ability to always try compressing data before writing it. This commit adds mount -o compress-force. A later commit will add a new inode flag that does the same thing. Signed-off-by: Chris Mason --- fs/btrfs/ctree.h | 1 + fs/btrfs/inode.c | 3 ++- fs/btrfs/super.c | 9 ++++++++- 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 9f806dd04c27..2aa8ec6a0981 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1161,6 +1161,7 @@ struct btrfs_root { #define BTRFS_MOUNT_SSD_SPREAD (1 << 8) #define BTRFS_MOUNT_NOSSD (1 << 9) #define BTRFS_MOUNT_DISCARD (1 << 10) +#define BTRFS_MOUNT_FORCE_COMPRESS (1 << 11) #define btrfs_clear_opt(o, opt) ((o) &= ~BTRFS_MOUNT_##opt) #define btrfs_set_opt(o, opt) ((o) |= BTRFS_MOUNT_##opt) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index b330e27c2d8b..f46c57276844 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -483,7 +483,8 @@ again: nr_pages_ret = 0; /* flag the file so we don't compress in the future */ - BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS; + if (!btrfs_test_opt(root, FORCE_COMPRESS)) + BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS; } if (will_compress) { *num_added += 1; diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 3f9b45704fcd..8a1ea6e64575 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -66,7 +66,8 @@ enum { Opt_degraded, Opt_subvol, Opt_device, Opt_nodatasum, Opt_nodatacow, Opt_max_extent, Opt_max_inline, Opt_alloc_start, Opt_nobarrier, Opt_ssd, Opt_nossd, Opt_ssd_spread, Opt_thread_pool, Opt_noacl, - Opt_compress, Opt_notreelog, Opt_ratio, Opt_flushoncommit, + Opt_compress, Opt_compress_force, Opt_notreelog, Opt_ratio, + Opt_flushoncommit, Opt_discard, Opt_err, }; @@ -82,6 +83,7 @@ static match_table_t tokens = { {Opt_alloc_start, "alloc_start=%s"}, {Opt_thread_pool, "thread_pool=%d"}, {Opt_compress, "compress"}, + {Opt_compress_force, "compress-force"}, {Opt_ssd, "ssd"}, {Opt_ssd_spread, "ssd_spread"}, {Opt_nossd, "nossd"}, @@ -173,6 +175,11 @@ int btrfs_parse_options(struct btrfs_root *root, char *options) printk(KERN_INFO "btrfs: use compression\n"); btrfs_set_opt(info->mount_opt, COMPRESS); break; + case Opt_compress_force: + printk(KERN_INFO "btrfs: forcing compression\n"); + btrfs_set_opt(info->mount_opt, FORCE_COMPRESS); + btrfs_set_opt(info->mount_opt, COMPRESS); + break; case Opt_ssd: printk(KERN_INFO "btrfs: use ssd allocation scheme\n"); btrfs_set_opt(info->mount_opt, SSD); From b8d9bfeb18f9af794020d96e9bee984d18a8d737 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Tue, 15 Dec 2009 06:54:17 +0000 Subject: [PATCH 1467/1626] Btrfs: remove tree_search() in extent_map.c This patch removes tree_search() in extent_map.c because it is not called by anything. Signed-off-by: Miao Xie Signed-off-by: Chris Mason --- fs/btrfs/extent_map.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c index ccbdcb54ec5d..5a4f73b79b75 100644 --- a/fs/btrfs/extent_map.c +++ b/fs/btrfs/extent_map.c @@ -155,20 +155,6 @@ static struct rb_node *__tree_search(struct rb_root *root, u64 offset, return NULL; } -/* - * look for an offset in the tree, and if it can't be found, return - * the first offset we can find smaller than 'offset'. - */ -static inline struct rb_node *tree_search(struct rb_root *root, u64 offset) -{ - struct rb_node *prev; - struct rb_node *ret; - ret = __tree_search(root, offset, &prev, NULL); - if (!ret) - return prev; - return ret; -} - /* check to see if two extent_map structs are adjacent and safe to merge */ static int mergable_maps(struct extent_map *prev, struct extent_map *next) { From d1ea6a61454e7d7ff0873d0ad1ae27d5807da0d3 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 20 Jan 2010 07:28:54 +0000 Subject: [PATCH 1468/1626] Btrfs: Use correct values when updating inode i_size on fallocate commit f2bc9dd07e3424c4ec5f3949961fe053d47bc825 Author: Aneesh Kumar K.V Date: Wed Jan 20 12:57:53 2010 +0530 Btrfs: Use correct values when updating inode i_size on fallocate Even though we allocate more, we should be updating inode i_size as per the arguments passed Signed-off-by: Aneesh Kumar K.V Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index f46c57276844..5606361b5f04 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5800,7 +5800,7 @@ out_fail: } static int prealloc_file_range(struct inode *inode, u64 start, u64 end, - u64 alloc_hint, int mode) + u64 alloc_hint, int mode, loff_t actual_len) { struct btrfs_trans_handle *trans; struct btrfs_root *root = BTRFS_I(inode)->root; @@ -5809,6 +5809,7 @@ static int prealloc_file_range(struct inode *inode, u64 start, u64 end, u64 cur_offset = start; u64 num_bytes = end - start; int ret = 0; + u64 i_size; while (num_bytes > 0) { alloc_size = min(num_bytes, root->fs_info->max_extent); @@ -5847,8 +5848,12 @@ static int prealloc_file_range(struct inode *inode, u64 start, u64 end, BTRFS_I(inode)->flags |= BTRFS_INODE_PREALLOC; if (!(mode & FALLOC_FL_KEEP_SIZE) && cur_offset > inode->i_size) { - i_size_write(inode, cur_offset); - btrfs_ordered_update_i_size(inode, cur_offset, NULL); + if (cur_offset > actual_len) + i_size = actual_len; + else + i_size = cur_offset; + i_size_write(inode, i_size); + btrfs_ordered_update_i_size(inode, i_size, NULL); } ret = btrfs_update_inode(trans, root, inode); @@ -5941,7 +5946,7 @@ static long btrfs_fallocate(struct inode *inode, int mode, !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) { ret = prealloc_file_range(inode, cur_offset, last_byte, - alloc_hint, mode); + alloc_hint, mode, offset+len); if (ret < 0) { free_extent_map(em); break; From f858153c367a397235d3e81136741e40e44faf1d Mon Sep 17 00:00:00 2001 From: Yang Hongyang Date: Tue, 26 Jan 2010 00:48:23 +0000 Subject: [PATCH 1469/1626] Btrfs: fix a memory leak in btrfs_init_acl In btrfs_init_acl() cloned acl is not released Signed-off-by: Yang Hongyang Signed-off-by: Chris Mason --- fs/btrfs/acl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c index fa44e92e9b8f..da3133c69830 100644 --- a/fs/btrfs/acl.c +++ b/fs/btrfs/acl.c @@ -269,6 +269,7 @@ int btrfs_init_acl(struct btrfs_trans_handle *trans, ACL_TYPE_ACCESS); } } + posix_acl_release(clone); } failed: posix_acl_release(acl); From e3acc2a6850efff647f1c5458524eb3a8bcba20a Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 26 Jan 2010 14:30:53 +0000 Subject: [PATCH 1470/1626] Btrfs: run orphan cleanup on default fs root This patch revert's commit 6c090a11e1c403b727a6a8eff0b97d5fb9e95cb5 Since it introduces this problem where we can run orphan cleanup on a volume that can have orphan entries re-added. Instead of my original fix, Yan Zheng pointed out that we can just revert my original fix and then run the orphan cleanup in open_ctree after we look up the fs_root. I have tested this with all the tests that gave me problems and this patch fixes both problems. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 6 ++++++ fs/btrfs/inode.c | 6 ------ 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 009e3bd18f23..87b25543d7d1 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1993,6 +1993,12 @@ struct btrfs_root *open_ctree(struct super_block *sb, if (!fs_info->fs_root) goto fail_trans_kthread; + if (!(sb->s_flags & MS_RDONLY)) { + down_read(&fs_info->cleanup_work_sem); + btrfs_orphan_cleanup(fs_info->fs_root); + up_read(&fs_info->cleanup_work_sem); + } + return tree_root; fail_trans_kthread: diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 5606361b5f04..8cd109972fa6 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3797,12 +3797,6 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry) if (location.type == BTRFS_INODE_ITEM_KEY) { inode = btrfs_iget(dir->i_sb, &location, root); - if (unlikely(root->clean_orphans) && - !(inode->i_sb->s_flags & MS_RDONLY)) { - down_read(&root->fs_info->cleanup_work_sem); - btrfs_orphan_cleanup(root); - up_read(&root->fs_info->cleanup_work_sem); - } return inode; } From f48b90756bd834dda852ff514f2690d3175b1f44 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 27 Jan 2010 02:07:59 +0000 Subject: [PATCH 1471/1626] Btrfs: do not mark the chunk as readonly if in degraded mode If a RAID setup has chunks that span multiple disks, and one of those disks has failed, btrfs_chunk_readonly will return 1 since one of the disks in that chunk's stripes is dead and therefore not writeable. So instead if we are in degraded mode, return 0 so we can go ahead and allocate stuff. Without this patch all of the block groups in a RAID1 setup will end up read-only, which will mean we can't add new disks to the array since we won't be able to make allocations. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 220dad5db017..66122bdf8bbf 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2538,6 +2538,11 @@ int btrfs_chunk_readonly(struct btrfs_root *root, u64 chunk_offset) if (!em) return 1; + if (btrfs_test_opt(root, DEGRADED)) { + free_extent_map(em); + return 0; + } + map = (struct map_lookup *)em->bdev; for (i = 0; i < map->num_stripes; i++) { if (!map->stripes[i].dev->writeable) { From 7f59203abeaf18bf3497b308891f95a4489810ad Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 27 Jan 2010 02:09:00 +0000 Subject: [PATCH 1472/1626] Btrfs: check return value of open_bdev_exclusive properly Hit this problem while testing RAID1 failure stuff. open_bdev_exclusive returns ERR_PTR(), not NULL. So change the return value properly. This is important if you accidently specify a device that doesn't exist when trying to add a new device to an array, you will panic the box dereferencing bdev. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 66122bdf8bbf..5eb7459e3782 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1434,8 +1434,8 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path) return -EINVAL; bdev = open_bdev_exclusive(device_path, 0, root->fs_info->bdev_holder); - if (!bdev) - return -EIO; + if (IS_ERR(bdev)) + return PTR_ERR(bdev); if (root->fs_info->fs_devices->seeding) { seeding_dev = 1; From 035fe03a7ad56982b30ab3a522b7b08d58feccd0 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 27 Jan 2010 02:09:38 +0000 Subject: [PATCH 1473/1626] Btrfs: check total number of devices when removing missing If you have a disk failure in RAID1 and then add a new disk to the array, and then try to remove the missing volume, it will fail. The reason is the sanity check only looks at the total number of rw devices, which is just 2 because we have 2 good disks and 1 bad one. Instead check the total number of devices in the array to make sure we can actually remove the device. Tested this with a failed disk setup and with this test we can now run btrfs-vol -r missing /mount/point and it works fine. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 5eb7459e3782..41ecbb2347f2 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1135,7 +1135,7 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) root->fs_info->avail_metadata_alloc_bits; if ((all_avail & BTRFS_BLOCK_GROUP_RAID10) && - root->fs_info->fs_devices->rw_devices <= 4) { + root->fs_info->fs_devices->num_devices <= 4) { printk(KERN_ERR "btrfs: unable to go below four devices " "on raid10\n"); ret = -EINVAL; @@ -1143,7 +1143,7 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) } if ((all_avail & BTRFS_BLOCK_GROUP_RAID1) && - root->fs_info->fs_devices->rw_devices <= 2) { + root->fs_info->fs_devices->num_devices <= 2) { printk(KERN_ERR "btrfs: unable to go below two " "devices on raid1\n"); ret = -EINVAL; From ba45d525748e969538c0ea3d491aa817d3be3af8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 28 Jan 2010 22:15:55 +0000 Subject: [PATCH 1474/1626] [ARM] Update mach-types Signed-off-by: Russell King --- arch/arm/tools/mach-types | 60 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 59 insertions(+), 1 deletion(-) diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index c3a74ce24ef6..5a79fc6ee818 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Wed Dec 16 20:06:34 2009 +# Last update: Thu Jan 28 22:15:54 2010 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2536,6 +2536,7 @@ davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548 c3ax03 MACH_C3AX03 C3AX03 2549 mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 esyx MACH_ESYX ESYX 2551 +dove_db2 MACH_DOVE_DB2 DOVE_DB2 2552 bulldog MACH_BULLDOG BULLDOG 2553 derell_me2000 MACH_DERELL_ME2000 DERELL_ME2000 2554 bcmring_base MACH_BCMRING_BASE BCMRING_BASE 2555 @@ -2555,6 +2556,7 @@ iseo MACH_ISEO ISEO 2568 cezanne MACH_CEZANNE CEZANNE 2569 lucca MACH_LUCCA LUCCA 2570 supersmart MACH_SUPERSMART SUPERSMART 2571 +arm11_board MACH_CS_MISANO CS_MISANO 2572 magnolia2 MACH_MAGNOLIA2 MAGNOLIA2 2573 emxx MACH_EMXX EMXX 2574 outlaw MACH_OUTLAW OUTLAW 2575 @@ -2578,3 +2580,59 @@ glacier MACH_GLACIER GLACIER 2592 phrazer_bulldog MACH_PHRAZER_BULLDOG PHRAZER_BULLDOG 2593 omap3_bulldog MACH_OMAP3_BULLDOG OMAP3_BULLDOG 2594 pca101 MACH_PCA101 PCA101 2595 +buzzc MACH_BUZZC BUZZC 2596 +sasie2 MACH_SASIE2 SASIE2 2597 +davinci_cio MACH_DAVINCI_CIO DAVINCI_CIO 2598 +smartmeter_dl MACH_SMARTMETER_DL SMARTMETER_DL 2599 +wzl6410 MACH_WZL6410 WZL6410 2600 +wzl6410m MACH_WZL6410M WZL6410M 2601 +wzl6410f MACH_WZL6410F WZL6410F 2602 +wzl6410i MACH_WZL6410I WZL6410I 2603 +spacecom1 MACH_SPACECOM1 SPACECOM1 2604 +pingu920 MACH_PINGU920 PINGU920 2605 +bravoc MACH_BRAVOC BRAVOC 2606 +cybo2440 MACH_CYBO2440 CYBO2440 2607 +vdssw MACH_VDSSW VDSSW 2608 +romulus MACH_ROMULUS ROMULUS 2609 +omap_magic MACH_OMAP_MAGIC OMAP_MAGIC 2610 +eltd100 MACH_ELTD100 ELTD100 2611 +capc7117 MACH_CAPC7117 CAPC7117 2612 +swan MACH_SWAN SWAN 2613 +veu MACH_VEU VEU 2614 +rm2 MACH_RM2 RM2 2615 +tt2100 MACH_TT2100 TT2100 2616 +venice MACH_VENICE VENICE 2617 +pc7323 MACH_PC7323 PC7323 2618 +masp MACH_MASP MASP 2619 +fujitsu_tvstbsoc0 MACH_FUJITSU_TVSTBSOC FUJITSU_TVSTBSOC 2620 +fujitsu_tvstbsoc1 MACH_FUJITSU_TVSTBSOC1 FUJITSU_TVSTBSOC1 2621 +lexikon MACH_LEXIKON LEXIKON 2622 +mini2440v2 MACH_MINI2440V2 MINI2440V2 2623 +icontrol MACH_ICONTROL ICONTROL 2624 +sheevad MACH_SHEEVAD SHEEVAD 2625 +qsd8x50a_st1_1 MACH_QSD8X50A_ST1_1 QSD8X50A_ST1_1 2626 +qsd8x50a_st1_5 MACH_QSD8X50A_ST1_5 QSD8X50A_ST1_5 2627 +bee MACH_BEE BEE 2628 +mx23evk MACH_MX23EVK MX23EVK 2629 +ap4evb MACH_AP4EVB AP4EVB 2630 +stockholm MACH_STOCKHOLM STOCKHOLM 2631 +lpc_h3131 MACH_LPC_H3131 LPC_H3131 2632 +stingray MACH_STINGRAY STINGRAY 2633 +kraken MACH_KRAKEN KRAKEN 2634 +gw2388 MACH_GW2388 GW2388 2635 +jadecpu MACH_JADECPU JADECPU 2636 +carlisle MACH_CARLISLE CARLISLE 2637 +lux_sf9 MACH_LUX_SFT9 LUX_SFT9 2638 +nemid_tb MACH_NEMID_TB NEMID_TB 2639 +terrier MACH_TERRIER TERRIER 2640 +turbot MACH_TURBOT TURBOT 2641 +sanddab MACH_SANDDAB SANDDAB 2642 +mx35_cicada MACH_MX35_CICADA MX35_CICADA 2643 +ghi2703d MACH_GHI2703D GHI2703D 2644 +lux_sfx9 MACH_LUX_SFX9 LUX_SFX9 2645 +lux_sf9g MACH_LUX_SF9G LUX_SF9G 2646 +lux_edk9 MACH_LUX_EDK9 LUX_EDK9 2647 +hw90240 MACH_HW90240 HW90240 2648 +dm365_leopard MACH_DM365_LEOPARD DM365_LEOPARD 2649 +mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650 +scat110 MACH_SCAT110 SCAT110 2651 From d291b9af1a1a12f59a464494900c6e0db26e2ec3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 28 Jan 2010 21:36:21 -0800 Subject: [PATCH 1475/1626] be2net: Fix memset() arg ordering. Noticed by Ben Hutchings. Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 90c5661b336f..6f2633887dc3 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -2168,7 +2168,7 @@ static int be_stats_init(struct be_adapter *adapter) cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma); if (cmd->va == NULL) return -1; - memset(cmd->va, cmd->size, 0); + memset(cmd->va, 0, cmd->size); return 0; } From 71cc1fa9f2d71eb2eba9b8e71e27cff9863e55f3 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 28 Jan 2010 21:37:18 -0800 Subject: [PATCH 1476/1626] cdc_ether: Partially revert "usbnet: Set link down initially ..." Commit 37e8273cd30592d3a82bcb70cbb1bdc4eaeb6b71 ("usbnet: Set link down initially for drivers that update link state") changed the initial link state in cdc_ether and other drivers based on the understanding that the devices they support generate link change interrupts. However, this is optional in the CDC Ethernet protocol, and two users have reported in that the link state for their devices remains down. Therefore, revert the change in cdc_ether. Signed-off-by: Ben Hutchings Tested-by: Avi Rozen Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ether.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 21e183a83b99..4f27f022fbf7 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -419,7 +419,7 @@ static int cdc_manage_power(struct usbnet *dev, int on) static const struct driver_info cdc_info = { .description = "CDC Ethernet Device", - .flags = FLAG_ETHER | FLAG_LINK_INTR, + .flags = FLAG_ETHER, // .check_connect = cdc_check_connect, .bind = cdc_bind, .unbind = usbnet_cdc_unbind, From bb209c8287d2d55ec4a67e3933346e0a3ee0da76 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 26 Jan 2010 17:10:03 +0000 Subject: [PATCH 1477/1626] powerpc/pci: Add calls to set_pcie_port_type() and set_pcie_hotplug_bridge() We are missing these when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt Acked-by: Jesse Barnes --- arch/powerpc/kernel/pci_of_scan.c | 2 ++ drivers/pci/probe.c | 4 ++-- include/linux/pci.h | 4 ++++ 3 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c index 7311fdfb9bf8..693eb9a25bfa 100644 --- a/arch/powerpc/kernel/pci_of_scan.c +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -140,6 +140,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, dev->devfn = devfn; dev->multifunction = 0; /* maybe a lie? */ dev->needs_freset = 0; /* pcie fundamental reset required */ + set_pcie_port_type(dev); dev->vendor = get_int_prop(node, "vendor-id", 0xffff); dev->device = get_int_prop(node, "device-id", 0xffff); @@ -164,6 +165,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, /* a PCI-PCI bridge */ dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; dev->rom_base_reg = PCI_ROM_ADDRESS1; + set_pcie_hotplug_bridge(dev); } else if (!strcmp(type, "cardbus")) { dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; } else { diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 98ffb2de22e9..446e4a94d7d3 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -681,7 +681,7 @@ static void pci_read_irq(struct pci_dev *dev) dev->irq = irq; } -static void set_pcie_port_type(struct pci_dev *pdev) +void set_pcie_port_type(struct pci_dev *pdev) { int pos; u16 reg16; @@ -695,7 +695,7 @@ static void set_pcie_port_type(struct pci_dev *pdev) pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4; } -static void set_pcie_hotplug_bridge(struct pci_dev *pdev) +void set_pcie_hotplug_bridge(struct pci_dev *pdev) { int pos; u16 reg16; diff --git a/include/linux/pci.h b/include/linux/pci.h index 174e5392e51e..c1968f464c38 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -756,6 +756,10 @@ pci_power_t pci_target_state(struct pci_dev *dev); int pci_prepare_to_sleep(struct pci_dev *dev); int pci_back_from_sleep(struct pci_dev *dev); +/* For use by arch with custom probe code */ +void set_pcie_port_type(struct pci_dev *pdev); +void set_pcie_hotplug_bridge(struct pci_dev *pdev); + /* Functions for PCI Hotplug drivers to use */ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); #ifdef CONFIG_HOTPLUG From 26b4a0ca46985ae9586c194f7859f3838b1230f8 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 26 Jan 2010 17:10:05 +0000 Subject: [PATCH 1478/1626] powerpc/pci: Add missing hookup to pci_slot Add missing hookup to existing pci_slot when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci_of_scan.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c index 693eb9a25bfa..b6b2e86a50d2 100644 --- a/arch/powerpc/kernel/pci_of_scan.c +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -123,6 +123,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, { struct pci_dev *dev; const char *type; + struct pci_slot *slot; dev = alloc_pci_dev(); if (!dev) @@ -142,6 +143,10 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, dev->needs_freset = 0; /* pcie fundamental reset required */ set_pcie_port_type(dev); + list_for_each_entry(slot, &dev->bus->slots, list) + if (PCI_SLOT(dev->devfn) == slot->number) + dev->slot = slot; + dev->vendor = get_int_prop(node, "vendor-id", 0xffff); dev->device = get_int_prop(node, "device-id", 0xffff); dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); From 94afc008e1e6fbadfac0b75fcf193b6d7074b2f1 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 26 Jan 2010 17:10:05 +0000 Subject: [PATCH 1479/1626] powerpc/pci: Add missing call to header fixup Add missing call to pci_fixup_device(pci_fixup_early, ...) when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci_of_scan.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c index b6b2e86a50d2..4aa17401657b 100644 --- a/arch/powerpc/kernel/pci_of_scan.c +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -166,6 +166,9 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, dev->error_state = pci_channel_io_normal; dev->dma_mask = 0xffffffff; + /* Early fixups, before probing the BARs */ + pci_fixup_device(pci_fixup_early, dev); + if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { /* a PCI-PCI bridge */ dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; From d234b3c36ff600b2a51cff74c9263cba5b2c24ee Mon Sep 17 00:00:00 2001 From: Stef van Os Date: Wed, 20 Jan 2010 03:59:39 +0000 Subject: [PATCH 1480/1626] powerpc/4xx: Add pcix type 1 transactions Some of the newer 4xx pci cores need an explicit bit set to send type 1 transactions instead of just comparing the bus numbers. This patch enables type 1 transations for pcix nodes, thus enabling devices behind PCI bridges. Signed-off-by: Stef van Os Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/ppc4xx_pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 6ff9d71b4c0d..8aa33021e50b 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -569,7 +569,8 @@ static void __init ppc4xx_probe_pcix_bridge(struct device_node *np) hose->last_busno = bus_range ? bus_range[1] : 0xff; /* Setup config space */ - setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, 0); + setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, + PPC_INDIRECT_TYPE_SET_CFG_TYPE); /* Disable all windows */ writel(0, reg + PCIX0_POM0SA); From 93fb84b50fe03aabca8d9dea5d3ba521a07e8571 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Thu, 28 Jan 2010 22:28:27 -0800 Subject: [PATCH 1481/1626] Input: winbond-cir - remove dmesg spam MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I missed converting one dev_info call to deb_dbg before submitting the driver. Without this change, a message will be printed to dmesg for each button press if a RC6 remote is used. Signed-off-by: David Härdeman Cc: stable Signed-off-by: Dmitry Torokhov --- drivers/input/misc/winbond-cir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c index 33309fe44e20..c8f5a9a3fa14 100644 --- a/drivers/input/misc/winbond-cir.c +++ b/drivers/input/misc/winbond-cir.c @@ -768,7 +768,7 @@ wbcir_parse_rc6(struct device *dev, struct wbcir_data *data) return; } - dev_info(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X " + dev_dbg(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X " "toggle %u mode %u scan 0x%08X\n", address, command, From cb6ecf6f7afece066265e243657b0ac28150a7b2 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 28 Jan 2010 22:28:27 -0800 Subject: [PATCH 1482/1626] Input: add the ABS_MT_PRESSURE event For pressure-based multi-touch devices, a direct way to send sensor intensity data per finger is needed. This patch adds the ABS_MT_PRESSURE event to the MT protocol. Requested-by: Yoonyoung Shim Requested-by: Mika Kuoppala Requested-by: Peter Hutterer Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- drivers/input/input.c | 1 + include/linux/input.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/input/input.c b/drivers/input/input.c index 30b503b8d67b..86cb2d2196ff 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -46,6 +46,7 @@ static unsigned int input_abs_bypass_init_data[] __initdata = { ABS_MT_TOOL_TYPE, ABS_MT_BLOB_ID, ABS_MT_TRACKING_ID, + ABS_MT_PRESSURE, 0 }; static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)]; diff --git a/include/linux/input.h b/include/linux/input.h index 7be8a6537b57..735ceaf1bc2d 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -660,6 +660,7 @@ struct input_absinfo { #define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ #define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ #define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ +#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ #define ABS_MAX 0x3f #define ABS_CNT (ABS_MAX+1) From f6bdc2303da6786cc22a7d24b6790e9f75b4cfdc Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 28 Jan 2010 22:28:28 -0800 Subject: [PATCH 1483/1626] Input: update multi-touch protocol documentation This patch documents a new ABS_MT parameter and adds further text to clarify some points around the MT protocol. Requested-by: Yoonyoung Shim Requested-by: Mika Kuoppala Requested-by: Peter Hutterer Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- Documentation/input/multi-touch-protocol.txt | 48 ++++++++++++++++---- 1 file changed, 40 insertions(+), 8 deletions(-) diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index a12ea3b586e6..8490480ce432 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -27,12 +27,30 @@ set of events/packets. A set of ABS_MT events with the desired properties is defined. The events are divided into categories, to allow for partial implementation. The -minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and -ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the -device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size -of the approaching finger. Anisotropy and direction may be specified with -ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The -ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a +minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which +allows for multiple fingers to be tracked. If the device supports it, the +ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size +of the contact area and approaching finger, respectively. + +The TOUCH and WIDTH parameters have a geometrical interpretation; imagine +looking through a window at someone gently holding a finger against the +glass. You will see two regions, one inner region consisting of the part +of the finger actually touching the glass, and one outer region formed by +the perimeter of the finger. The diameter of the inner region is the +ABS_MT_TOUCH_MAJOR, the diameter of the outer region is +ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder +against the glass. The inner region will increase, and in general, the +ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than +unity, is related to the finger pressure. For pressure-based devices, +ABS_MT_PRESSURE may be used to provide the pressure on the contact area +instead. + +In addition to the MAJOR parameters, the oval shape of the finger can be +described by adding the MINOR parameters, such that MAJOR and MINOR are the +major and minor axis of an ellipse. Finally, the orientation of the oval +shape can be describe with the ORIENTATION parameter. + +The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a finger or a pen or something else. Devices with more granular information may specify general shapes as blobs, i.e., as a sequence of rectangular shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices @@ -42,11 +60,9 @@ report finger tracking from hardware [5]. Here is what a minimal event sequence for a two-finger touch would look like: - ABS_MT_TOUCH_MAJOR ABS_MT_POSITION_X ABS_MT_POSITION_Y SYN_MT_REPORT - ABS_MT_TOUCH_MAJOR ABS_MT_POSITION_X ABS_MT_POSITION_Y SYN_MT_REPORT @@ -87,6 +103,12 @@ the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates the notion of pressure. The fingers of the hand and the palm all have different characteristic widths [1]. +ABS_MT_PRESSURE + +The pressure, in arbitrary units, on the contact area. May be used instead +of TOUCH and WIDTH for pressure-based devices or any device with a spatial +signal intensity distribution. + ABS_MT_ORIENTATION The orientation of the ellipse. The value should describe a signed quarter @@ -170,6 +192,16 @@ There are a few devices that support trackingID in hardware. User space can make use of these native identifiers to reduce bandwidth and cpu usage. +Gestures +-------- + +In the specific application of creating gesture events, the TOUCH and WIDTH +parameters can be used to, e.g., approximate finger pressure or distinguish +between index finger and thumb. With the addition of the MINOR parameters, +one can also distinguish between a sweeping finger and a pointing finger, +and with ORIENTATION, one can detect twisting of fingers. + + Notes ----- From 66ddfc62caec65a25fd5a8b20f535a2958ee94e6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 28 Jan 2010 20:50:39 +0100 Subject: [PATCH 1484/1626] mx35: add a missing comma in a pad definition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reported-by: Tim Sander Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/iomux-mx35.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h index 00b0ac1db225..c88d40795f7a 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h @@ -671,7 +671,7 @@ #define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL) #define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4 0, NO_PAD_CTRL) +#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL) #define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL) #define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL) From 3e59aaa7ae9de49af8810102f12857860d5bd0ed Mon Sep 17 00:00:00 2001 From: Anuj Aggarwal Date: Fri, 29 Jan 2010 13:58:55 +0530 Subject: [PATCH 1485/1626] ASoC: AIC23: Fixing writes to non-existing registers in resume function Commit e9ff5eb2 (Fixing infinite loop in resume path) uses wrong AIC23 register in resume function because of which register writes happen on some non-existing registers. Signed-off-by: Anuj Aggarwal Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/codecs/tlv320aic23.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index a9dc5fb54774..da589d8664d0 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -627,7 +627,7 @@ static int tlv320aic23_resume(struct platform_device *pdev) u16 reg; /* Sync reg_cache with the hardware */ - for (reg = 0; reg < TLV320AIC23_RESET; reg++) { + for (reg = 0; reg <= TLV320AIC23_ACTIVE; reg++) { u16 val = tlv320aic23_read_reg_cache(codec, reg); tlv320aic23_write(codec, reg, val); } From 5bbd4953a4fb5d8d597b4a53b8da97eee320b634 Mon Sep 17 00:00:00 2001 From: Anuj Aggarwal Date: Fri, 29 Jan 2010 15:49:22 +0530 Subject: [PATCH 1486/1626] ASoC: AM3517: ASoC driver not getting compiled Commit 761c9d45 (ASoC: Fix build of OMAP sound drivers) changes CONFIG_MACH_OMAP3517EVM -> CONFIG_SND_OMAP_SOC_OMAP3517EVM in the Makefile. Whereas the config option defined in Kconfig is SND_OMAP_SOC_AM3517EVM. Because of this, ASoC driver for AM3517 was not getting compiled. Signed-off-by: Anuj Aggarwal Signed-off-by: Mark Brown --- sound/soc/omap/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index 3db8a6c523f4..19283e5edfbf 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -25,7 +25,7 @@ obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o obj-$(CONFIG_SND_OMAP_SOC_OMAP2EVM) += snd-soc-omap2evm.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3EVM) += snd-soc-omap3evm.o -obj-$(CONFIG_SND_OMAP_SOC_OMAP3517EVM) += snd-soc-am3517evm.o +obj-$(CONFIG_SND_OMAP_SOC_AM3517EVM) += snd-soc-am3517evm.o obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o From 221af7f87b97431e3ee21ce4b0e77d5411cf1549 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 28 Jan 2010 22:14:42 -0800 Subject: [PATCH 1487/1626] Split 'flush_old_exec' into two functions 'flush_old_exec()' is the point of no return when doing an execve(), and it is pretty badly misnamed. It doesn't just flush the old executable environment, it also starts up the new one. Which is very inconvenient for things like setting up the new personality, because we want the new personality to affect the starting of the new environment, but at the same time we do _not_ want the new personality to take effect if flushing the old one fails. As a result, the x86-64 '32-bit' personality is actually done using this insane "I'm going to change the ABI, but I haven't done it yet" bit (TIF_ABI_PENDING), with SET_PERSONALITY() not actually setting the personality, but just the "pending" bit, so that "flush_thread()" can do the actual personality magic. This patch in no way changes any of that insanity, but it does split the 'flush_old_exec()' function up into a preparatory part that can fail (still called flush_old_exec()), and a new part that will actually set up the new exec environment (setup_new_exec()). All callers are changed to trivially comply with the new world order. Signed-off-by: H. Peter Anvin Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- arch/sh/kernel/process_64.c | 2 +- arch/x86/ia32/ia32_aout.c | 10 ++++++---- fs/binfmt_aout.c | 1 + fs/binfmt_elf.c | 27 ++------------------------- fs/binfmt_elf_fdpic.c | 3 +++ fs/binfmt_flat.c | 1 + fs/binfmt_som.c | 1 + fs/exec.c | 26 ++++++++++++++++---------- include/linux/binfmts.h | 1 + include/linux/sched.h | 2 +- 10 files changed, 33 insertions(+), 41 deletions(-) diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 31f80c61b031..ec79faf6f021 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -368,7 +368,7 @@ void exit_thread(void) void flush_thread(void) { - /* Called by fs/exec.c (flush_old_exec) to remove traces of a + /* Called by fs/exec.c (setup_new_exec) to remove traces of a * previously running executable. */ #ifdef CONFIG_SH_FPU if (last_task_used_math == current) { diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index 2a4d073d2cf1..435d2a5323da 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -308,15 +308,17 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs) if (retval) return retval; - regs->cs = __USER32_CS; - regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 = - regs->r13 = regs->r14 = regs->r15 = 0; - /* OK, This is the point of no return */ set_personality(PER_LINUX); set_thread_flag(TIF_IA32); clear_thread_flag(TIF_ABI_PENDING); + setup_new_exec(bprm); + + regs->cs = __USER32_CS; + regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 = + regs->r13 = regs->r14 = regs->r15 = 0; + current->mm->end_code = ex.a_text + (current->mm->start_code = N_TXTADDR(ex)); current->mm->end_data = ex.a_data + diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c index 346b69405363..fdd397099172 100644 --- a/fs/binfmt_aout.c +++ b/fs/binfmt_aout.c @@ -264,6 +264,7 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs) #else set_personality(PER_LINUX); #endif + setup_new_exec(bprm); current->mm->end_code = ex.a_text + (current->mm->start_code = N_TXTADDR(ex)); diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index edd90c49003c..fd5b2ea5d299 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -662,27 +662,6 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) if (elf_interpreter[elf_ppnt->p_filesz - 1] != '\0') goto out_free_interp; - /* - * The early SET_PERSONALITY here is so that the lookup - * for the interpreter happens in the namespace of the - * to-be-execed image. SET_PERSONALITY can select an - * alternate root. - * - * However, SET_PERSONALITY is NOT allowed to switch - * this task into the new images's memory mapping - * policy - that is, TASK_SIZE must still evaluate to - * that which is appropriate to the execing application. - * This is because exit_mmap() needs to have TASK_SIZE - * evaluate to the size of the old image. - * - * So if (say) a 64-bit application is execing a 32-bit - * application it is the architecture's responsibility - * to defer changing the value of TASK_SIZE until the - * switch really is going to happen - do this in - * flush_thread(). - akpm - */ - SET_PERSONALITY(loc->elf_ex); - interpreter = open_exec(elf_interpreter); retval = PTR_ERR(interpreter); if (IS_ERR(interpreter)) @@ -730,9 +709,6 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) /* Verify the interpreter has a valid arch */ if (!elf_check_arch(&loc->interp_elf_ex)) goto out_free_dentry; - } else { - /* Executables without an interpreter also need a personality */ - SET_PERSONALITY(loc->elf_ex); } /* Flush all traces of the currently running executable */ @@ -752,7 +728,8 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) current->flags |= PF_RANDOMIZE; - arch_pick_mmap_layout(current->mm); + + setup_new_exec(bprm); /* Do this so that we can load the interpreter, if need be. We will change some of these later */ diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index c57d9ce5ff7e..18d77297ccc8 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -321,6 +321,9 @@ static int load_elf_fdpic_binary(struct linux_binprm *bprm, set_personality(PER_LINUX_FDPIC); if (elf_read_implies_exec(&exec_params.hdr, executable_stack)) current->personality |= READ_IMPLIES_EXEC; + + setup_new_exec(bprm); + set_binfmt(&elf_fdpic_format); current->mm->start_code = 0; diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c index d4a00ea1054c..42c6b4a54445 100644 --- a/fs/binfmt_flat.c +++ b/fs/binfmt_flat.c @@ -519,6 +519,7 @@ static int load_flat_file(struct linux_binprm * bprm, /* OK, This is the point of no return */ set_personality(PER_LINUX_32BIT); + setup_new_exec(bprm); } /* diff --git a/fs/binfmt_som.c b/fs/binfmt_som.c index 2a9b5330cc5e..cc8560f6c9b0 100644 --- a/fs/binfmt_som.c +++ b/fs/binfmt_som.c @@ -227,6 +227,7 @@ load_som_binary(struct linux_binprm * bprm, struct pt_regs * regs) /* OK, This is the point of no return */ current->flags &= ~PF_FORKNOEXEC; current->personality = PER_HPUX; + setup_new_exec(bprm); /* Set the task size for HP-UX processes such that * the gateway page is outside the address space. diff --git a/fs/exec.c b/fs/exec.c index 632b02e34ec7..675c3f44c2ea 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -941,9 +941,7 @@ void set_task_comm(struct task_struct *tsk, char *buf) int flush_old_exec(struct linux_binprm * bprm) { - char * name; - int i, ch, retval; - char tcomm[sizeof(current->comm)]; + int retval; /* * Make sure we have a private signal table and that @@ -963,6 +961,20 @@ int flush_old_exec(struct linux_binprm * bprm) goto out; bprm->mm = NULL; /* We're using it now */ + return 0; + +out: + return retval; +} +EXPORT_SYMBOL(flush_old_exec); + +void setup_new_exec(struct linux_binprm * bprm) +{ + int i, ch; + char * name; + char tcomm[sizeof(current->comm)]; + + arch_pick_mmap_layout(current->mm); /* This is the point of no return */ current->sas_ss_sp = current->sas_ss_size = 0; @@ -1019,14 +1031,8 @@ int flush_old_exec(struct linux_binprm * bprm) flush_signal_handlers(current, 0); flush_old_files(current->files); - - return 0; - -out: - return retval; } - -EXPORT_SYMBOL(flush_old_exec); +EXPORT_SYMBOL(setup_new_exec); /* * Prepare credentials and lock ->cred_guard_mutex. diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index cd4349bdc34e..89c6249fc561 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -109,6 +109,7 @@ extern int prepare_binprm(struct linux_binprm *); extern int __must_check remove_arg_zero(struct linux_binprm *); extern int search_binary_handler(struct linux_binprm *,struct pt_regs *); extern int flush_old_exec(struct linux_binprm * bprm); +extern void setup_new_exec(struct linux_binprm * bprm); extern int suid_dumpable; #define SUID_DUMP_DISABLE 0 /* No setuid dumping */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 6f7bba93929b..abdfacc58653 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1369,7 +1369,7 @@ struct task_struct { char comm[TASK_COMM_LEN]; /* executable name excluding path - access with [gs]et_task_comm (which lock it with task_lock()) - - initialized normally by flush_old_exec */ + - initialized normally by setup_new_exec */ /* file system info */ int link_count, total_link_count; #ifdef CONFIG_SYSVIPC From 05d43ed8a89c159ff641d472f970e3f1baa66318 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 28 Jan 2010 22:14:43 -0800 Subject: [PATCH 1488/1626] x86: get rid of the insane TIF_ABI_PENDING bit Now that the previous commit made it possible to do the personality setting at the point of no return, we do just that for ELF binaries. And suddenly all the reasons for that insane TIF_ABI_PENDING bit go away, and we can just make SET_PERSONALITY() just do the obvious thing for a 32-bit compat process. Everything becomes much more straightforward this way. Signed-off-by: H. Peter Anvin Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- arch/x86/ia32/ia32_aout.c | 1 - arch/x86/include/asm/elf.h | 10 ++-------- arch/x86/include/asm/thread_info.h | 2 -- arch/x86/kernel/process.c | 12 ------------ arch/x86/kernel/process_64.c | 11 +++++++++++ 5 files changed, 13 insertions(+), 23 deletions(-) diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index 435d2a5323da..f9f472462753 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -311,7 +311,6 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs) /* OK, This is the point of no return */ set_personality(PER_LINUX); set_thread_flag(TIF_IA32); - clear_thread_flag(TIF_ABI_PENDING); setup_new_exec(bprm); diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h index b4501ee223ad..1994d3f58443 100644 --- a/arch/x86/include/asm/elf.h +++ b/arch/x86/include/asm/elf.h @@ -181,14 +181,8 @@ do { \ void start_thread_ia32(struct pt_regs *regs, u32 new_ip, u32 new_sp); #define compat_start_thread start_thread_ia32 -#define COMPAT_SET_PERSONALITY(ex) \ -do { \ - if (test_thread_flag(TIF_IA32)) \ - clear_thread_flag(TIF_ABI_PENDING); \ - else \ - set_thread_flag(TIF_ABI_PENDING); \ - current->personality |= force_personality32; \ -} while (0) +void set_personality_ia32(void); +#define COMPAT_SET_PERSONALITY(ex) set_personality_ia32() #define COMPAT_ELF_PLATFORM ("i686") diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index 375c917c37d2..e0d28901e969 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h @@ -87,7 +87,6 @@ struct thread_info { #define TIF_NOTSC 16 /* TSC is not accessible in userland */ #define TIF_IA32 17 /* 32bit process */ #define TIF_FORK 18 /* ret_from_fork */ -#define TIF_ABI_PENDING 19 #define TIF_MEMDIE 20 #define TIF_DEBUG 21 /* uses debug registers */ #define TIF_IO_BITMAP 22 /* uses I/O bitmap */ @@ -112,7 +111,6 @@ struct thread_info { #define _TIF_NOTSC (1 << TIF_NOTSC) #define _TIF_IA32 (1 << TIF_IA32) #define _TIF_FORK (1 << TIF_FORK) -#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING) #define _TIF_DEBUG (1 << TIF_DEBUG) #define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) #define _TIF_FREEZE (1 << TIF_FREEZE) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 02c3ee013ccd..c9b3522b6b46 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -115,18 +115,6 @@ void flush_thread(void) { struct task_struct *tsk = current; -#ifdef CONFIG_X86_64 - if (test_tsk_thread_flag(tsk, TIF_ABI_PENDING)) { - clear_tsk_thread_flag(tsk, TIF_ABI_PENDING); - if (test_tsk_thread_flag(tsk, TIF_IA32)) { - clear_tsk_thread_flag(tsk, TIF_IA32); - } else { - set_tsk_thread_flag(tsk, TIF_IA32); - current_thread_info()->status |= TS_COMPAT; - } - } -#endif - flush_ptrace_hw_breakpoint(tsk); memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array)); /* diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index f9e033150cdf..41a26a82470a 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -521,6 +521,17 @@ void set_personality_64bit(void) current->personality &= ~READ_IMPLIES_EXEC; } +void set_personality_ia32(void) +{ + /* inherit personality from parent */ + + /* Make sure to be in 32bit mode */ + set_thread_flag(TIF_IA32); + + /* Prepare the first "return" to user space */ + current_thread_info()->status |= TS_COMPAT; +} + unsigned long get_wchan(struct task_struct *p) { unsigned long stack; From 94673e968cbcce07fa78dac4b0ae05d24b5816e1 Mon Sep 17 00:00:00 2001 From: David Miller Date: Thu, 28 Jan 2010 21:42:02 -0800 Subject: [PATCH 1489/1626] sparc: TIF_ABI_PENDING bit removal Here are the sparc bits to remove TIF_ABI_PENDING now that set_personality() is called at the appropriate place in exec. Signed-off-by: David S. Miller Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- arch/sparc/include/asm/elf_64.h | 13 +++---------- arch/sparc/include/asm/thread_info_64.h | 4 +--- arch/sparc/kernel/process_64.c | 8 -------- 3 files changed, 4 insertions(+), 21 deletions(-) diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h index ff66bb88537b..e67880381b84 100644 --- a/arch/sparc/include/asm/elf_64.h +++ b/arch/sparc/include/asm/elf_64.h @@ -195,17 +195,10 @@ static inline unsigned int sparc64_elf_hwcap(void) #define ELF_PLATFORM (NULL) #define SET_PERSONALITY(ex) \ -do { unsigned long new_flags = current_thread_info()->flags; \ - new_flags &= _TIF_32BIT; \ - if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ - new_flags |= _TIF_32BIT; \ +do { if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ + set_thread_flag(TIF_32BIT); \ else \ - new_flags &= ~_TIF_32BIT; \ - if ((current_thread_info()->flags & _TIF_32BIT) \ - != new_flags) \ - set_thread_flag(TIF_ABI_PENDING); \ - else \ - clear_thread_flag(TIF_ABI_PENDING); \ + clear_thread_flag(TIF_32BIT); \ /* flush_thread will update pgd cache */ \ if (personality(current->personality) != PER_LINUX32) \ set_personality(PER_LINUX | \ diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h index 7257ebb8f394..39be9f256e5a 100644 --- a/arch/sparc/include/asm/thread_info_64.h +++ b/arch/sparc/include/asm/thread_info_64.h @@ -228,12 +228,11 @@ register struct thread_info *current_thread_info_reg asm("g6"); #define TIF_SECCOMP 9 /* secure computing */ #define TIF_SYSCALL_AUDIT 10 /* syscall auditing active */ #define TIF_SYSCALL_TRACEPOINT 11 /* syscall tracepoint instrumentation */ -/* flag bit 11 is available */ /* NOTE: Thread flags >= 12 should be ones we have no interest * in using in assembly, else we can't use the mask as * an immediate value in instructions such as andcc. */ -#define TIF_ABI_PENDING 12 +/* flag bit 12 is available */ #define TIF_MEMDIE 13 #define TIF_POLLING_NRFLAG 14 #define TIF_FREEZE 15 /* is freezing for suspend */ @@ -248,7 +247,6 @@ register struct thread_info *current_thread_info_reg asm("g6"); #define _TIF_SECCOMP (1<task->mm; if (mm) tsb_context_switch(mm); From a7016235a61d520e6806f38129001d935c4b6661 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Fri, 29 Jan 2010 17:46:34 +0000 Subject: [PATCH 1490/1626] mm: fix migratetype bug which slowed swapping After memory pressure has forced it to dip into the reserves, 2.6.32's 5f8dcc21211a3d4e3a7a5ca366b469fb88117f61 "page-allocator: split per-cpu list into one-list-per-migrate-type" has been returning MIGRATE_RESERVE pages to the MIGRATE_MOVABLE free_list: in some sense depleting reserves. Fix that in the most straightforward way (which, considering the overheads of alternative approaches, is Mel's preference): the right migratetype is already in page_private(page), but free_pcppages_bulk() wasn't using it. How did this bug show up? As a 20% slowdown in my tmpfs loop kbuild swapping tests, on PowerMac G5 with SLUB allocator. Bisecting to that commit was easy, but explaining the magnitude of the slowdown not easy. The same effect appears, but much less markedly, with SLAB, and even less markedly on other machines (the PowerMac divides into fewer zones than x86, I think that may be a factor). We guess that lumpy reclaim of short-lived high-order pages is implicated in some way, and probably this bug has been tickling a poor decision somewhere in page reclaim. But instrumentation hasn't told me much, I've run out of time and imagination to determine exactly what's going on, and shouldn't hold up the fix any longer: it's valid, and might even fix other misbehaviours. Signed-off-by: Hugh Dickins Acked-by: Mel Gorman Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index d2a8889b4c58..8deb9d0fd5b1 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -556,8 +556,9 @@ static void free_pcppages_bulk(struct zone *zone, int count, page = list_entry(list->prev, struct page, lru); /* must delete as __free_one_page list manipulates */ list_del(&page->lru); - __free_one_page(page, zone, 0, migratetype); - trace_mm_page_pcpu_drain(page, 0, migratetype); + /* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */ + __free_one_page(page, zone, 0, page_private(page)); + trace_mm_page_pcpu_drain(page, 0, page_private(page)); } while (--count && --batch_free && !list_empty(list)); } spin_unlock(&zone->lock); From 4995c0b3673c6be76e54b2c89479b1cdf29e69ca Mon Sep 17 00:00:00 2001 From: Dmitry Artamonow Date: Sun, 24 Jan 2010 00:20:20 +0300 Subject: [PATCH 1491/1626] mfd: Fix asic3 build asic3 also needs tmio_core or otherwise will fail to build. Signed-off-by: Dmitry Artamonow Signed-off-by: Samuel Ortiz --- drivers/mfd/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 8f0d18409ede..e09eb4870db6 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_MFD_SM501) += sm501.o -obj-$(CONFIG_MFD_ASIC3) += asic3.o +obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o obj-$(CONFIG_MFD_SH_MOBILE_SDHI) += sh_mobile_sdhi.o obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o From 7415c7602ddb14a9a9c39bc8c38afa667092a527 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 29 Jan 2010 06:51:08 -0300 Subject: [PATCH 1492/1626] V4L/DVB: saa7134: remove stray unlock_kernel An earlier commit removed the lock_kernel/unlock_kernel pair but forgot to remove the unlock_kernel call in the cleanup path at the end of the function. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-empress.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 7dfecfc6017c..ee5bff02a92c 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -93,9 +93,9 @@ static int ts_open(struct file *file) dprintk("open dev=%s\n", video_device_node_name(vdev)); err = -EBUSY; if (!mutex_trylock(&dev->empress_tsq.vb_lock)) - goto done; + return err; if (atomic_read(&dev->empress_users)) - goto done_up; + goto done; /* Unmute audio */ saa_writeb(SAA7134_AUDIO_MUTE_CTRL, @@ -105,10 +105,8 @@ static int ts_open(struct file *file) file->private_data = dev; err = 0; -done_up: - mutex_unlock(&dev->empress_tsq.vb_lock); done: - unlock_kernel(); + mutex_unlock(&dev->empress_tsq.vb_lock); return err; } From abe94c756c08d50566c09a65b9c7fe72f83071c5 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 29 Jan 2010 13:57:50 -0800 Subject: [PATCH 1493/1626] Linux 2.6.33-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 67d6cff6e4d4..394aec712c7d 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 33 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* From 9198bcd39f558dd56823f1c9983e2252fc99a501 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 29 Jan 2010 14:20:05 -0800 Subject: [PATCH 1494/1626] omap: define _toggle_gpio_edge_triggering only for OMAP1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The only usage of _toggle_gpio_edge_triggering is in an #ifdef CONFIG_ARCH_OMAP1 block, so only provide it if CONFIG_ARCH_OMAP1 is defined, too. This fixes a compiler warning: arch/arm/plat-omap/gpio.c:758: warning: '_toggle_gpio_edge_triggering' defined but not used when compiling for ARCH_OMAP2, ARCH_OMAP3 or ARCH_OMAP4. Signed-off-by: Uwe Kleine-König Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index d17620c50c28..d2422c766cca 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -750,6 +750,7 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, } #endif +#ifdef CONFIG_ARCH_OMAP1 /* * This only applies to chips that can't do both rising and falling edge * detection at once. For all other chips, this function is a noop. @@ -760,11 +761,9 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) u32 l = 0; switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; break; -#endif #ifdef CONFIG_ARCH_OMAP15XX case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; @@ -787,6 +786,7 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) __raw_writel(l, reg); } +#endif static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) { From 643ced9b0b4810b5725910667604f1a373f30f2f Mon Sep 17 00:00:00 2001 From: Li Peng Date: Thu, 28 Jan 2010 01:05:09 +0800 Subject: [PATCH 1495/1626] drm/i915: don't trigger ironlake vblank interrupt at irq install Zhenyu noticed that the ironlake vblank enabling patch has one issue that it will trigger vblank starting from irq postinstall, this isn't necessary. This patch addresses this issue by only adding the vblank into DEIER but mask them in DEIMR, so that it won't trigger vblank interrupt at irq install. Signed-off-by: Li Peng Acked-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_irq.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index e7472d82132a..fcd87ad75fec 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1022,14 +1022,13 @@ static int ironlake_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* enable kind of interrupts always enabled */ - u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | - DE_PIPEA_VBLANK | DE_PIPEB_VBLANK; + u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT; u32 render_mask = GT_USER_INTERRUPT; u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG | SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG; dev_priv->irq_mask_reg = ~display_mask; - dev_priv->de_irq_enable_reg = display_mask; + dev_priv->de_irq_enable_reg = display_mask | DE_PIPEA_VBLANK | DE_PIPEB_VBLANK; /* should always can generate irq */ I915_WRITE(DEIIR, I915_READ(DEIIR)); From 2dd873838805a6e84c1afdfbf13e8709bfb5c70f Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 27 Jan 2010 16:32:46 +0800 Subject: [PATCH 1496/1626] drm/i915: Add support for SDVO composite TV Signed-off-by: Zhao Yakui Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_sdvo.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index eaacfd0920df..82678d30ab06 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2345,6 +2345,14 @@ intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags) connector->connector_type = DRM_MODE_CONNECTOR_VGA; intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) | (1 << INTEL_ANALOG_CLONE_BIT); + } else if (flags & SDVO_OUTPUT_CVBS0) { + + sdvo_priv->controlled_output = SDVO_OUTPUT_CVBS0; + encoder->encoder_type = DRM_MODE_ENCODER_TVDAC; + connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO; + sdvo_priv->is_tv = true; + intel_output->needs_tv_clock = true; + intel_output->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT; } else if (flags & SDVO_OUTPUT_LVDS0) { sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0; From f034b12dbb5749b11e9390e15e93ffa87ece8038 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Thu, 21 Jan 2010 15:20:18 +0800 Subject: [PATCH 1497/1626] drm/i915: Fix the incorrect DMI string for Samsung SX20S laptop Signed-off-by: Zhao Yakui Reported-by: Philipp Kohlbecher Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_lvds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index aa74e59bec61..75a9772061cb 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -611,7 +611,7 @@ static const struct dmi_system_id bad_lid_status[] = { { .ident = "Samsung SX20S", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"), DMI_MATCH(DMI_BOARD_NAME, "SX20S"), }, }, From 013d5aa2bbb2ceacba7a0dad7f2a0eb20133323f Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 29 Jan 2010 11:18:31 -0800 Subject: [PATCH 1498/1626] drm/i915: page flip support for Ironlake This patch adds support for page flipping on Ironlake, which uses different interrupt bits for triggering flip submit IRQs. Signed-off-by: Jesse Barnes [anholt: hand-resolved for rebasing off of render power saving patch] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_irq.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index fcd87ad75fec..50ddf4a95c5e 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -309,11 +309,21 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev) if (de_iir & DE_GSE) ironlake_opregion_gse_intr(dev); - if (de_iir & DE_PIPEA_VBLANK) - drm_handle_vblank(dev, 0); + if (de_iir & DE_PLANEA_FLIP_DONE) + intel_prepare_page_flip(dev, 0); - if (de_iir & DE_PIPEB_VBLANK) + if (de_iir & DE_PLANEB_FLIP_DONE) + intel_prepare_page_flip(dev, 1); + + if (de_iir & DE_PIPEA_VBLANK) { + drm_handle_vblank(dev, 0); + intel_finish_page_flip(dev, 0); + } + + if (de_iir & DE_PIPEB_VBLANK) { drm_handle_vblank(dev, 1); + intel_finish_page_flip(dev, 1); + } /* check event from PCH */ if ((de_iir & DE_PCH_EVENT) && @@ -1022,7 +1032,8 @@ static int ironlake_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* enable kind of interrupts always enabled */ - u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT; + u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | + DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE; u32 render_mask = GT_USER_INTERRUPT; u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG | SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG; From 7c099ce1575126395f186ecf58b51a60d5c3be7d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Thu, 28 Jan 2010 21:02:54 +0100 Subject: [PATCH 1499/1626] x86: Add quirk for Intel DG45FC board to avoid low memory corruption MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 6aa542a694dc9ea4344a8a590d2628c33d1b9431 added a quirk for the Intel DG45ID board due to low memory corruption. The Intel DG45FC shares the same BIOS (and the same bug) as noted in: http://bugzilla.kernel.org/show_bug.cgi?id=13736 Signed-off-by: David Härdeman LKML-Reference: <20100128200254.GA9134@hardeman.nu> Cc: Cc: Alexey Fisher Cc: ykzhao Cc: Tony Bones Cc: Ingo Molnar Signed-off-by: H. Peter Anvin --- arch/x86/kernel/setup.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index f7b8b9894b22..5d9e40c58628 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -642,19 +642,27 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"), }, }, - { /* - * AMI BIOS with low memory corruption was found on Intel DG45ID board. - * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will + * AMI BIOS with low memory corruption was found on Intel DG45ID and + * DG45FC boards. + * It has a different DMI_BIOS_VENDOR = "Intel Corp.", for now we will * match only DMI_BOARD_NAME and see if there is more bad products * with this vendor. */ + { .callback = dmi_low_memory_corruption, .ident = "AMI BIOS", .matches = { DMI_MATCH(DMI_BOARD_NAME, "DG45ID"), }, }, + { + .callback = dmi_low_memory_corruption, + .ident = "AMI BIOS", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "DG45FC"), + }, + }, #endif {} }; From cc0967490c1c3824bc5b75718b6ca8a51d9f2617 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Thu, 28 Jan 2010 17:04:42 -0600 Subject: [PATCH 1500/1626] x86, hw_breakpoints, kgdb: Fix kgdb to use hw_breakpoint API In the 2.6.33 kernel, the hw_breakpoint API is now used for the performance event counters. The hw_breakpoint_handler() now consumes the hw breakpoints that were previously set by kgdb arch specific code. In order for kgdb to work in conjunction with this core API change, kgdb must use some of the low level functions of the hw_breakpoint API to install, uninstall, and deal with hw breakpoint reservations. The kgdb core required a change to call kgdb_disable_hw_debug anytime a slave cpu enters kgdb_wait() in order to keep all the hw breakpoints in sync as well as to prevent hitting a hw breakpoint while kgdb is active. During the architecture specific initialization of kgdb, it will pre-allocate 4 disabled (struct perf event **) structures. Kgdb will use these to manage the capabilities for the 4 hw breakpoint registers, per cpu. Right now the hw_breakpoint API does not have a way to ask how many breakpoints are available, on each CPU so it is possible that the install of a breakpoint might fail when kgdb restores the system to the run state. The intent of this patch is to first get the basic functionality of hw breakpoints working and leave it to the person debugging the kernel to understand what hw breakpoints are in use and what restrictions have been imposed as a result. Breakpoint constraints will be dealt with in a future patch. While atomic, the x86 specific kgdb code will call arch_uninstall_hw_breakpoint() and arch_install_hw_breakpoint() to manage the cpu specific hw breakpoints. The net result of these changes allow kgdb to use the same pool of hw_breakpoints that are used by the perf event API, but neither knows about future reservations for the available hw breakpoint slots. Signed-off-by: Jason Wessel Acked-by: Frederic Weisbecker Cc: kgdb-bugreport@lists.sourceforge.net Cc: K.Prasad Cc: Peter Zijlstra Cc: Alan Stern Cc: torvalds@linux-foundation.org LKML-Reference: <1264719883-7285-2-git-send-email-jason.wessel@windriver.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/kgdb.c | 171 +++++++++++++++++++++++++++-------------- kernel/kgdb.c | 3 + 2 files changed, 117 insertions(+), 57 deletions(-) diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index dd74fe7273b1..62bea7307eaa 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include @@ -204,40 +205,38 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) static struct hw_breakpoint { unsigned enabled; - unsigned type; - unsigned len; unsigned long addr; + int len; + int type; + struct perf_event **pev; } breakinfo[4]; static void kgdb_correct_hw_break(void) { - unsigned long dr7; - int correctit = 0; - int breakbit; int breakno; - get_debugreg(dr7, 7); for (breakno = 0; breakno < 4; breakno++) { - breakbit = 2 << (breakno << 1); - if (!(dr7 & breakbit) && breakinfo[breakno].enabled) { - correctit = 1; - dr7 |= breakbit; - dr7 &= ~(0xf0000 << (breakno << 2)); - dr7 |= ((breakinfo[breakno].len << 2) | - breakinfo[breakno].type) << - ((breakno << 2) + 16); - set_debugreg(breakinfo[breakno].addr, breakno); - - } else { - if ((dr7 & breakbit) && !breakinfo[breakno].enabled) { - correctit = 1; - dr7 &= ~breakbit; - dr7 &= ~(0xf0000 << (breakno << 2)); - } - } + struct perf_event *bp; + struct arch_hw_breakpoint *info; + int val; + int cpu = raw_smp_processor_id(); + if (!breakinfo[breakno].enabled) + continue; + bp = *per_cpu_ptr(breakinfo[breakno].pev, cpu); + info = counter_arch_bp(bp); + if (bp->attr.disabled != 1) + continue; + bp->attr.bp_addr = breakinfo[breakno].addr; + bp->attr.bp_len = breakinfo[breakno].len; + bp->attr.bp_type = breakinfo[breakno].type; + info->address = breakinfo[breakno].addr; + info->len = breakinfo[breakno].len; + info->type = breakinfo[breakno].type; + val = arch_install_hw_breakpoint(bp); + if (!val) + bp->attr.disabled = 0; } - if (correctit) - set_debugreg(dr7, 7); + hw_breakpoint_restore(); } static int @@ -259,15 +258,23 @@ kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) static void kgdb_remove_all_hw_break(void) { int i; + int cpu = raw_smp_processor_id(); + struct perf_event *bp; - for (i = 0; i < 4; i++) - memset(&breakinfo[i], 0, sizeof(struct hw_breakpoint)); + for (i = 0; i < 4; i++) { + if (!breakinfo[i].enabled) + continue; + bp = *per_cpu_ptr(breakinfo[i].pev, cpu); + if (bp->attr.disabled == 1) + continue; + arch_uninstall_hw_breakpoint(bp); + bp->attr.disabled = 1; + } } static int kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) { - unsigned type; int i; for (i = 0; i < 4; i++) @@ -278,27 +285,38 @@ kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) switch (bptype) { case BP_HARDWARE_BREAKPOINT: - type = 0; - len = 1; + len = 1; + breakinfo[i].type = X86_BREAKPOINT_EXECUTE; break; case BP_WRITE_WATCHPOINT: - type = 1; + breakinfo[i].type = X86_BREAKPOINT_WRITE; break; case BP_ACCESS_WATCHPOINT: - type = 3; + breakinfo[i].type = X86_BREAKPOINT_RW; break; default: return -1; } - - if (len == 1 || len == 2 || len == 4) - breakinfo[i].len = len - 1; - else + switch (len) { + case 1: + breakinfo[i].len = X86_BREAKPOINT_LEN_1; + break; + case 2: + breakinfo[i].len = X86_BREAKPOINT_LEN_2; + break; + case 4: + breakinfo[i].len = X86_BREAKPOINT_LEN_4; + break; +#ifdef CONFIG_X86_64 + case 8: + breakinfo[i].len = X86_BREAKPOINT_LEN_8; + break; +#endif + default: return -1; - - breakinfo[i].enabled = 1; + } breakinfo[i].addr = addr; - breakinfo[i].type = type; + breakinfo[i].enabled = 1; return 0; } @@ -313,8 +331,21 @@ kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) */ void kgdb_disable_hw_debug(struct pt_regs *regs) { + int i; + int cpu = raw_smp_processor_id(); + struct perf_event *bp; + /* Disable hardware debugging while we are in kgdb: */ set_debugreg(0UL, 7); + for (i = 0; i < 4; i++) { + if (!breakinfo[i].enabled) + continue; + bp = *per_cpu_ptr(breakinfo[i].pev, cpu); + if (bp->attr.disabled == 1) + continue; + arch_uninstall_hw_breakpoint(bp); + bp->attr.disabled = 1; + } } /** @@ -378,7 +409,6 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, struct pt_regs *linux_regs) { unsigned long addr; - unsigned long dr6; char *ptr; int newPC; @@ -404,20 +434,6 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, raw_smp_processor_id()); } - get_debugreg(dr6, 6); - if (!(dr6 & 0x4000)) { - int breakno; - - for (breakno = 0; breakno < 4; breakno++) { - if (dr6 & (1 << breakno) && - breakinfo[breakno].type == 0) { - /* Set restore flag: */ - linux_regs->flags |= X86_EFLAGS_RF; - break; - } - } - } - set_debugreg(0UL, 6); kgdb_correct_hw_break(); return 0; @@ -485,8 +501,7 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd) break; case DIE_DEBUG: - if (atomic_read(&kgdb_cpu_doing_single_step) == - raw_smp_processor_id()) { + if (atomic_read(&kgdb_cpu_doing_single_step) != -1) { if (user_mode(regs)) return single_step_cont(regs, args); break; @@ -539,7 +554,42 @@ static struct notifier_block kgdb_notifier = { */ int kgdb_arch_init(void) { - return register_die_notifier(&kgdb_notifier); + int i, cpu; + int ret; + struct perf_event_attr attr; + struct perf_event **pevent; + + ret = register_die_notifier(&kgdb_notifier); + if (ret != 0) + return ret; + /* + * Pre-allocate the hw breakpoint structions in the non-atomic + * portion of kgdb because this operation requires mutexs to + * complete. + */ + attr.bp_addr = (unsigned long)kgdb_arch_init; + attr.type = PERF_TYPE_BREAKPOINT; + attr.bp_len = HW_BREAKPOINT_LEN_1; + attr.bp_type = HW_BREAKPOINT_W; + attr.disabled = 1; + for (i = 0; i < 4; i++) { + breakinfo[i].pev = register_wide_hw_breakpoint(&attr, NULL); + if (IS_ERR(breakinfo[i].pev)) { + printk(KERN_ERR "kgdb: Could not allocate hw breakpoints\n"); + breakinfo[i].pev = NULL; + kgdb_arch_exit(); + return -1; + } + for_each_online_cpu(cpu) { + pevent = per_cpu_ptr(breakinfo[i].pev, cpu); + pevent[0]->hw.sample_period = 1; + if (pevent[0]->destroy != NULL) { + pevent[0]->destroy = NULL; + release_bp_slot(*pevent); + } + } + } + return ret; } /** @@ -550,6 +600,13 @@ int kgdb_arch_init(void) */ void kgdb_arch_exit(void) { + int i; + for (i = 0; i < 4; i++) { + if (breakinfo[i].pev) { + unregister_wide_hw_breakpoint(breakinfo[i].pev); + breakinfo[i].pev = NULL; + } + } unregister_die_notifier(&kgdb_notifier); } diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 2eb517e23514..c7ade62e4ef0 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -583,6 +583,9 @@ static void kgdb_wait(struct pt_regs *regs) smp_wmb(); atomic_set(&cpu_in_kgdb[cpu], 1); + /* Disable any cpu specific hw breakpoints */ + kgdb_disable_hw_debug(regs); + /* Wait till primary CPU is done with debugging */ while (atomic_read(&passive_cpu_wait[cpu])) cpu_relax(); From 5352ae638e2d7d5c9b2e4d528676bbf2af6fd6f3 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Thu, 28 Jan 2010 17:04:43 -0600 Subject: [PATCH 1501/1626] perf, hw_breakpoint, kgdb: Do not take mutex for kernel debugger This patch fixes the regression in functionality where the kernel debugger and the perf API do not nicely share hw breakpoint reservations. The kernel debugger cannot use any mutex_lock() calls because it can start the kernel running from an invalid context. A mutex free version of the reservation API needed to get created for the kernel debugger to safely update hw breakpoint reservations. The possibility for a breakpoint reservation to be concurrently processed at the time that kgdb interrupts the system is improbable. Should this corner case occur the end user is warned, and the kernel debugger will prohibit updating the hardware breakpoint reservations. Any time the kernel debugger reserves a hardware breakpoint it will be a system wide reservation. Signed-off-by: Jason Wessel Acked-by: Frederic Weisbecker Cc: kgdb-bugreport@lists.sourceforge.net Cc: K.Prasad Cc: Peter Zijlstra Cc: Alan Stern Cc: torvalds@linux-foundation.org LKML-Reference: <1264719883-7285-3-git-send-email-jason.wessel@windriver.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/kgdb.c | 51 ++++++++++++++++++++++++++++++++++ include/linux/hw_breakpoint.h | 2 ++ kernel/hw_breakpoint.c | 52 ++++++++++++++++++++++++++++------- 3 files changed, 95 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index 62bea7307eaa..bfba6019d762 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -239,6 +239,49 @@ static void kgdb_correct_hw_break(void) hw_breakpoint_restore(); } +static int hw_break_reserve_slot(int breakno) +{ + int cpu; + int cnt = 0; + struct perf_event **pevent; + + for_each_online_cpu(cpu) { + cnt++; + pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu); + if (dbg_reserve_bp_slot(*pevent)) + goto fail; + } + + return 0; + +fail: + for_each_online_cpu(cpu) { + cnt--; + if (!cnt) + break; + pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu); + dbg_release_bp_slot(*pevent); + } + return -1; +} + +static int hw_break_release_slot(int breakno) +{ + struct perf_event **pevent; + int cpu; + + for_each_online_cpu(cpu) { + pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu); + if (dbg_release_bp_slot(*pevent)) + /* + * The debugger is responisble for handing the retry on + * remove failure. + */ + return -1; + } + return 0; +} + static int kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) { @@ -250,6 +293,10 @@ kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) if (i == 4) return -1; + if (hw_break_release_slot(i)) { + printk(KERN_ERR "Cannot remove hw breakpoint at %lx\n", addr); + return -1; + } breakinfo[i].enabled = 0; return 0; @@ -316,6 +363,10 @@ kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) return -1; } breakinfo[i].addr = addr; + if (hw_break_reserve_slot(i)) { + breakinfo[i].addr = 0; + return -1; + } breakinfo[i].enabled = 1; return 0; diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h index 41235c93e4e9..070ba0621738 100644 --- a/include/linux/hw_breakpoint.h +++ b/include/linux/hw_breakpoint.h @@ -75,6 +75,8 @@ extern int __register_perf_hw_breakpoint(struct perf_event *bp); extern void unregister_hw_breakpoint(struct perf_event *bp); extern void unregister_wide_hw_breakpoint(struct perf_event **cpu_events); +extern int dbg_reserve_bp_slot(struct perf_event *bp); +extern int dbg_release_bp_slot(struct perf_event *bp); extern int reserve_bp_slot(struct perf_event *bp); extern void release_bp_slot(struct perf_event *bp); diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c index c030ae657f20..8a5c7d55ac9f 100644 --- a/kernel/hw_breakpoint.c +++ b/kernel/hw_breakpoint.c @@ -243,38 +243,70 @@ static void toggle_bp_slot(struct perf_event *bp, bool enable) * ((per_cpu(nr_bp_flexible, *) > 1) + max(per_cpu(nr_cpu_bp_pinned, *)) * + max(per_cpu(nr_task_bp_pinned, *))) < HBP_NUM */ -int reserve_bp_slot(struct perf_event *bp) +static int __reserve_bp_slot(struct perf_event *bp) { struct bp_busy_slots slots = {0}; - int ret = 0; - - mutex_lock(&nr_bp_mutex); fetch_bp_busy_slots(&slots, bp); /* Flexible counters need to keep at least one slot */ - if (slots.pinned + (!!slots.flexible) == HBP_NUM) { - ret = -ENOSPC; - goto end; - } + if (slots.pinned + (!!slots.flexible) == HBP_NUM) + return -ENOSPC; toggle_bp_slot(bp, true); -end: + return 0; +} + +int reserve_bp_slot(struct perf_event *bp) +{ + int ret; + + mutex_lock(&nr_bp_mutex); + + ret = __reserve_bp_slot(bp); + mutex_unlock(&nr_bp_mutex); return ret; } +static void __release_bp_slot(struct perf_event *bp) +{ + toggle_bp_slot(bp, false); +} + void release_bp_slot(struct perf_event *bp) { mutex_lock(&nr_bp_mutex); - toggle_bp_slot(bp, false); + __release_bp_slot(bp); mutex_unlock(&nr_bp_mutex); } +/* + * Allow the kernel debugger to reserve breakpoint slots without + * taking a lock using the dbg_* variant of for the reserve and + * release breakpoint slots. + */ +int dbg_reserve_bp_slot(struct perf_event *bp) +{ + if (mutex_is_locked(&nr_bp_mutex)) + return -1; + + return __reserve_bp_slot(bp); +} + +int dbg_release_bp_slot(struct perf_event *bp) +{ + if (mutex_is_locked(&nr_bp_mutex)) + return -1; + + __release_bp_slot(bp); + + return 0; +} int register_perf_hw_breakpoint(struct perf_event *bp) { From fcafde2e6d81aa7901f9b10e6a097592f0637b79 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Tue, 22 Dec 2009 15:58:08 +0200 Subject: [PATCH 1502/1626] Bluetooth: Remove double free of SKB pointer in L2CAP Trivial fix for double free of SKB pointer with kfree_skb to make code simplier and cleaner. Remove unused variable err. Signed-off-by: Andrei Emeltchenko Acked-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 1120cf14a548..8acc19ed9c4d 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -3518,7 +3518,6 @@ static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk struct l2cap_pinfo *pi; u16 control, len; u8 tx_seq; - int err; sk = l2cap_get_chan_by_scid(&conn->chan_list, cid); if (!sk) { @@ -3570,13 +3569,11 @@ static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk goto drop; if (__is_iframe(control)) - err = l2cap_data_channel_iframe(sk, control, skb); + l2cap_data_channel_iframe(sk, control, skb); else - err = l2cap_data_channel_sframe(sk, control, skb); + l2cap_data_channel_sframe(sk, control, skb); - if (!err) - goto done; - break; + goto done; case L2CAP_MODE_STREAMING: control = get_unaligned_le16(skb->data); @@ -3602,7 +3599,7 @@ static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk else pi->expected_tx_seq = tx_seq + 1; - err = l2cap_sar_reassembly_sdu(sk, skb, control); + l2cap_sar_reassembly_sdu(sk, skb, control); goto done; From e420aba331f44de0eed6871441293a6124d566d1 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Wed, 23 Dec 2009 13:07:14 +0200 Subject: [PATCH 1503/1626] Bluetooth: Fix memory leak in L2CAP Move skb_clone after error confition check so it is not going potentially out of the scope. Signed-off-by: Andrei Emeltchenko Acked-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 8acc19ed9c4d..400efa26ddba 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -1368,7 +1368,6 @@ static int l2cap_ertm_send(struct sock *sk) while ((skb = sk->sk_send_head) && (!l2cap_tx_window_full(sk)) && !(pi->conn_state & L2CAP_CONN_REMOTE_BUSY)) { - tx_skb = skb_clone(skb, GFP_ATOMIC); if (pi->remote_max_tx && bt_cb(skb)->retries == pi->remote_max_tx) { @@ -1376,6 +1375,8 @@ static int l2cap_ertm_send(struct sock *sk) break; } + tx_skb = skb_clone(skb, GFP_ATOMIC); + bt_cb(skb)->retries++; control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE); From 7427847d2d044d85f478757ea03165ae3cfe87c4 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 14 Sep 2009 13:43:49 -0400 Subject: [PATCH 1504/1626] Bluetooth: Redo checks in IRQ handler for shared IRQ support Commit ac019360fe3 changed the irq handler logic to BUG_ON rather than returning IRQ_NONE when the incoming argument is invalid. While this works in most cases, it doesn't work when the IRQ is shared with other devices (or when DEBUG_SHIRQ is enabled). So revert the previous change and replace the warning message with a comment explaining that we want this behavior. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Marcel Holtmann --- drivers/bluetooth/bluecard_cs.c | 4 +++- drivers/bluetooth/bt3c_cs.c | 4 +++- drivers/bluetooth/btuart_cs.c | 4 +++- drivers/bluetooth/dtl1_cs.c | 4 +++- 4 files changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index 2acdc605cb4b..c2cf81144715 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -503,7 +503,9 @@ static irqreturn_t bluecard_interrupt(int irq, void *dev_inst) unsigned int iobase; unsigned char reg; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; if (!test_bit(CARD_READY, &(info->hw_state))) return IRQ_HANDLED; diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index d814a2755ccb..9f5926aaf57f 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -345,7 +345,9 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst) int iir; irqreturn_t r = IRQ_NONE; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; iobase = info->p_dev->io.BasePort1; diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index d339464dc15e..91c523099804 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -295,7 +295,9 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst) int iir, lsr; irqreturn_t r = IRQ_NONE; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; iobase = info->p_dev->io.BasePort1; diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index 4f02a6f3c980..697591941e17 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -299,7 +299,9 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) int iir, lsr; irqreturn_t r = IRQ_NONE; - BUG_ON(!info->hdev); + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; iobase = info->p_dev->io.BasePort1; From 9670d80a9a6e24725c4111bef5d6cc7786ad0dc5 Mon Sep 17 00:00:00 2001 From: Vikram Kandukuri Date: Wed, 6 Jan 2010 19:04:15 +0530 Subject: [PATCH 1505/1626] Bluetooth: Add DFU driver for Atheros Bluetooth chipset AR3011 Signed-off-by: Vikram Kandukuri Signed-off-by: Alicke Xu Reviewed-by: Luis R. Rodriguez Signed-off-by: Marcel Holtmann --- drivers/bluetooth/Kconfig | 13 ++- drivers/bluetooth/Makefile | 1 + drivers/bluetooth/ath3k.c | 187 +++++++++++++++++++++++++++++++++++++ 3 files changed, 200 insertions(+), 1 deletion(-) create mode 100644 drivers/bluetooth/ath3k.c diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 652367aa6546..058fbccf2f52 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -195,5 +195,16 @@ config BT_MRVL_SDIO Say Y here to compile support for Marvell BT-over-SDIO driver into the kernel or say M to compile it as module. -endmenu +config BT_ATH3K + tristate "Atheros firmware download driver" + depends on BT_HCIBTUSB + select FW_LOADER + help + Bluetooth firmware download driver. + This driver loads the firmware into the Atheros Bluetooth + chipset. + Say Y here to compile support for "Atheros firmware download driver" + into the kernel or say M to compile it as module (ath3k). + +endmenu diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index b3f57d2d4eb0..7e5aed598121 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_BT_HCIBTUART) += btuart_cs.o obj-$(CONFIG_BT_HCIBTUSB) += btusb.o obj-$(CONFIG_BT_HCIBTSDIO) += btsdio.o +obj-$(CONFIG_BT_ATH3K) += ath3k.o obj-$(CONFIG_BT_MRVL) += btmrvl.o obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c new file mode 100644 index 000000000000..add9485ca5b6 --- /dev/null +++ b/drivers/bluetooth/ath3k.c @@ -0,0 +1,187 @@ +/* + * Copyright (c) 2008-2009 Atheros Communications Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define VERSION "1.0" + + +static struct usb_device_id ath3k_table[] = { + /* Atheros AR3011 */ + { USB_DEVICE(0x0CF3, 0x3000) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, ath3k_table); + +#define USB_REQ_DFU_DNLOAD 1 +#define BULK_SIZE 4096 + +struct ath3k_data { + struct usb_device *udev; + u8 *fw_data; + u32 fw_size; + u32 fw_sent; +}; + +static int ath3k_load_firmware(struct ath3k_data *data, + unsigned char *firmware, + int count) +{ + u8 *send_buf; + int err, pipe, len, size, sent = 0; + + BT_DBG("ath3k %p udev %p", data, data->udev); + + pipe = usb_sndctrlpipe(data->udev, 0); + + if ((usb_control_msg(data->udev, pipe, + USB_REQ_DFU_DNLOAD, + USB_TYPE_VENDOR, 0, 0, + firmware, 20, USB_CTRL_SET_TIMEOUT)) < 0) { + BT_ERR("Can't change to loading configuration err"); + return -EBUSY; + } + sent += 20; + count -= 20; + + send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC); + if (!send_buf) { + BT_ERR("Can't allocate memory chunk for firmware"); + return -ENOMEM; + } + + while (count) { + size = min_t(uint, count, BULK_SIZE); + pipe = usb_sndbulkpipe(data->udev, 0x02); + memcpy(send_buf, firmware + sent, size); + + err = usb_bulk_msg(data->udev, pipe, send_buf, size, + &len, 3000); + + if (err || (len != size)) { + BT_ERR("Error in firmware loading err = %d," + "len = %d, size = %d", err, len, size); + goto error; + } + + sent += size; + count -= size; + } + + kfree(send_buf); + return 0; + +error: + kfree(send_buf); + return err; +} + +static int ath3k_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + const struct firmware *firmware; + struct usb_device *udev = interface_to_usbdev(intf); + struct ath3k_data *data; + int size; + + BT_DBG("intf %p id %p", intf, id); + + if (intf->cur_altsetting->desc.bInterfaceNumber != 0) + return -ENODEV; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->udev = udev; + + if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) { + kfree(data); + return -EIO; + } + + size = max_t(uint, firmware->size, 4096); + data->fw_data = kmalloc(size, GFP_KERNEL); + if (!data->fw_data) { + release_firmware(firmware); + kfree(data); + return -ENOMEM; + } + + memcpy(data->fw_data, firmware->data, firmware->size); + data->fw_size = firmware->size; + data->fw_sent = 0; + release_firmware(firmware); + + usb_set_intfdata(intf, data); + if (ath3k_load_firmware(data, data->fw_data, data->fw_size)) { + usb_set_intfdata(intf, NULL); + return -EIO; + } + + return 0; +} + +static void ath3k_disconnect(struct usb_interface *intf) +{ + struct ath3k_data *data = usb_get_intfdata(intf); + + BT_DBG("ath3k_disconnect intf %p", intf); + + kfree(data->fw_data); + kfree(data); +} + +static struct usb_driver ath3k_driver = { + .name = "ath3k", + .probe = ath3k_probe, + .disconnect = ath3k_disconnect, + .id_table = ath3k_table, +}; + +static int __init ath3k_init(void) +{ + BT_INFO("Atheros AR30xx firmware driver ver %s", VERSION); + return usb_register(&ath3k_driver); +} + +static void __exit ath3k_exit(void) +{ + usb_deregister(&ath3k_driver); +} + +module_init(ath3k_init); +module_exit(ath3k_exit); + +MODULE_AUTHOR("Atheros Communications"); +MODULE_DESCRIPTION("Atheros AR30xx firmware driver"); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("ath3k-1.fw"); From 6bf8268f9a91f1065c99503161ebd061492bebe3 Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Wed, 20 Jan 2010 12:00:42 +0000 Subject: [PATCH 1506/1626] Bluetooth: Use the control channel for raw HID reports In commit 2da31939a42f7a676a0bc5155d6a0a39ed8451f2, support for Bluetooth hid_output_raw_report was added, but it pushes the data to the interrupt channel instead of the contol one. This patch makes hid_output_raw_report use the control channel instead. Using the interrupt channel was a mistake. Signed-off-by: Bastien Nocera Signed-off-by: Marcel Holtmann --- net/bluetooth/hidp/core.c | 70 ++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 34 deletions(-) diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 18e7f5a43dc4..6cf526d06e21 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -243,6 +243,39 @@ static void hidp_input_report(struct hidp_session *session, struct sk_buff *skb) input_sync(dev); } +static int __hidp_send_ctrl_message(struct hidp_session *session, + unsigned char hdr, unsigned char *data, int size) +{ + struct sk_buff *skb; + + BT_DBG("session %p data %p size %d", session, data, size); + + if (!(skb = alloc_skb(size + 1, GFP_ATOMIC))) { + BT_ERR("Can't allocate memory for new frame"); + return -ENOMEM; + } + + *skb_put(skb, 1) = hdr; + if (data && size > 0) + memcpy(skb_put(skb, size), data, size); + + skb_queue_tail(&session->ctrl_transmit, skb); + + return 0; +} + +static inline int hidp_send_ctrl_message(struct hidp_session *session, + unsigned char hdr, unsigned char *data, int size) +{ + int err; + + err = __hidp_send_ctrl_message(session, hdr, data, size); + + hidp_schedule(session); + + return err; +} + static int hidp_queue_report(struct hidp_session *session, unsigned char *data, int size) { @@ -282,7 +315,9 @@ static int hidp_send_report(struct hidp_session *session, struct hid_report *rep static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count) { - if (hidp_queue_report(hid->driver_data, data, count)) + if (hidp_send_ctrl_message(hid->driver_data, + HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE, + data, count)) return -ENOMEM; return count; } @@ -307,39 +342,6 @@ static inline void hidp_del_timer(struct hidp_session *session) del_timer(&session->timer); } -static int __hidp_send_ctrl_message(struct hidp_session *session, - unsigned char hdr, unsigned char *data, int size) -{ - struct sk_buff *skb; - - BT_DBG("session %p data %p size %d", session, data, size); - - if (!(skb = alloc_skb(size + 1, GFP_ATOMIC))) { - BT_ERR("Can't allocate memory for new frame"); - return -ENOMEM; - } - - *skb_put(skb, 1) = hdr; - if (data && size > 0) - memcpy(skb_put(skb, size), data, size); - - skb_queue_tail(&session->ctrl_transmit, skb); - - return 0; -} - -static inline int hidp_send_ctrl_message(struct hidp_session *session, - unsigned char hdr, unsigned char *data, int size) -{ - int err; - - err = __hidp_send_ctrl_message(session, hdr, data, size); - - hidp_schedule(session); - - return err; -} - static void hidp_process_handshake(struct hidp_session *session, unsigned char param) { From df2e615a3b3a66d0731e3309e9731970a6c51268 Mon Sep 17 00:00:00 2001 From: Colin Tuckley Date: Fri, 29 Jan 2010 12:52:55 +0100 Subject: [PATCH 1507/1626] ARM: 5907/1: ARM: Fix the reset on the RealView PBX Development board Signed-off-by: Colin Tuckley Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-realview/realview_pbx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index a21a4b395f73..d94857eb0690 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -334,8 +334,8 @@ static void realview_pbx_reset(char mode) * in the system FPGA */ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); - __raw_writel(0x0000, reset_ctrl); - __raw_writel(0x0004, reset_ctrl); + __raw_writel(0x00F0, reset_ctrl); + __raw_writel(0x00F4, reset_ctrl); } static void __init realview_pbx_init(void) From c540b9ff0f8679ba924fac072aeb7d63fa473190 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 26 Jan 2010 19:09:48 +0100 Subject: [PATCH 1508/1626] ARM: 5904/1: ARM: Always generate the IT instruction when compiling for Thumb-2 Current behaviour is to generate the IT instruction only for Thumb-2 code. However, the kernel helpers in entry-armv.S are compiled to ARM in a unified syntax file (if THUMB2_KERNEL). Recent compilers warn about missing IT instruction in unified assembly syntax files. The patch changes the "-mimplicit-it" gas option to "always". Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 9e7582572741..356d702c0808 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -94,7 +94,7 @@ CFLAGS_ABI +=-funwind-tables endif ifeq ($(CONFIG_THUMB2_KERNEL),y) -AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it) +AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it) AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb From 9e9432c267e4047db98b9d4fba95099c6effcef9 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Sat, 30 Jan 2010 20:28:19 +0100 Subject: [PATCH 1509/1626] block: fix bugs in bio-integrity mempool usage Fix two bugs in the bio integrity code: use_bip_pool() always returns 0 because it checks against the wrong limit, causing the mempool to be used only when regular allocation fails. When the mempool is used as a fallback we don't free the data properly. Signed-Off-By: Chuck Ebbert Acked-by: Martin K. Petersen Signed-off-by: Jens Axboe --- fs/bio-integrity.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c index 49a34e7f7306..a16f29e888cd 100644 --- a/fs/bio-integrity.c +++ b/fs/bio-integrity.c @@ -61,7 +61,7 @@ static inline unsigned int vecs_to_idx(unsigned int nr) static inline int use_bip_pool(unsigned int idx) { - if (idx == BIOVEC_NR_POOLS) + if (idx == BIOVEC_MAX_IDX) return 1; return 0; @@ -95,6 +95,7 @@ struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *bio, /* Use mempool if lower order alloc failed or max vecs were requested */ if (bip == NULL) { + idx = BIOVEC_MAX_IDX; /* so we free the payload properly later */ bip = mempool_alloc(bs->bio_integrity_pool, gfp_mask); if (unlikely(bip == NULL)) { From 3256a05531b1164a9c138da701b922a113bddf82 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sun, 31 Jan 2010 12:39:50 +0900 Subject: [PATCH 1510/1626] nilfs2: fix potential leak of dirty data on umount This fixes incorrect usage of nilfs_segctor_confirm() test function in nilfs_segctor_destroy(); nilfs_segctor_confirm() returns zero if the filesystem is not clean, so its use in nilfs_segctor_destroy() needs inversion. Signed-off-by: Ryusuke Konishi --- fs/nilfs2/segment.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c index 17584c524486..105b508b47a8 100644 --- a/fs/nilfs2/segment.c +++ b/fs/nilfs2/segment.c @@ -2829,7 +2829,7 @@ static void nilfs_segctor_destroy(struct nilfs_sc_info *sci) || sci->sc_seq_request != sci->sc_seq_done); spin_unlock(&sci->sc_state_lock); - if (flag || nilfs_segctor_confirm(sci)) + if (flag || !nilfs_segctor_confirm(sci)) nilfs_segctor_write_out(sci); WARN_ON(!list_empty(&sci->sc_copied_buffers)); From 61684ceaad4f65d1a9832c722f7bd5e7fc714de9 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 25 Jan 2010 14:10:47 +0900 Subject: [PATCH 1511/1626] x86/agp: Fix agp_amd64_init regression This fixes the regression introduced by commit 42590a75019a50012f25a962246498dead428433 ("x86/agp: Fix agp_amd64_init and agp_amd64_cleanup"). The above commit changes agp_amd64_init() not to do anything if gart_iommu_aperture is not zero. If GART iommu calls agp_amd64_init(), we need to skip agp_amd64_init() when it's called later via module_init. The problem is that gart_iommu_init() calls agp_amd64_init() with not zero gart_iommu_aperture so agp_amd64_init() is never initialized. When gart_iommu_init() calls agp_amd64_init(), agp should be always initialized. Reported-by: Marin Mitov Reported-by: Johannes Hirte Signed-off-by: FUJITA Tomonori Tested-by: Marin Mitov Tested-by: Kevin Winchester Cc: davej@redhat.com Cc: Linus Torvalds LKML-Reference: <20100125141006O.fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar --- drivers/char/agp/amd64-agp.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 1afb8968a342..34cf04e21795 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -729,9 +729,6 @@ int __init agp_amd64_init(void) if (agp_off) return -EINVAL; - if (gart_iommu_aperture) - return agp_bridges_found ? 0 : -ENODEV; - err = pci_register_driver(&agp_amd64_pci_driver); if (err < 0) return err; @@ -768,6 +765,14 @@ int __init agp_amd64_init(void) return err; } +static int __init agp_amd64_mod_init(void) +{ + if (gart_iommu_aperture) + return agp_bridges_found ? 0 : -ENODEV; + + return agp_amd64_init(); +} + static void __exit agp_amd64_cleanup(void) { if (gart_iommu_aperture) @@ -777,7 +782,7 @@ static void __exit agp_amd64_cleanup(void) pci_unregister_driver(&agp_amd64_pci_driver); } -module_init(agp_amd64_init); +module_init(agp_amd64_mod_init); module_exit(agp_amd64_cleanup); MODULE_AUTHOR("Dave Jones , Andi Kleen"); From 97b94ccb9aa1b82ed7a9a045d0ae5b32c99b84a0 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 29 Jan 2010 15:31:47 +1000 Subject: [PATCH 1512/1626] drm/radeon/kms: fix incorrect logic in DP vs eDP connector checking. This makes displayport work again here. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_dp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 3eb0ca5b3d73..9c023d25aad0 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -468,7 +468,7 @@ void radeon_dp_set_link_config(struct drm_connector *connector, struct radeon_connector *radeon_connector; struct radeon_connector_atom_dig *dig_connector; - if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) || + if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) && (connector->connector_type != DRM_MODE_CONNECTOR_eDP)) return; @@ -583,7 +583,7 @@ void dp_link_train(struct drm_encoder *encoder, u8 train_set[4]; int i; - if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) || + if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) && (connector->connector_type != DRM_MODE_CONNECTOR_eDP)) return; From 43c33ed87d0f1b900a6a3014db556ecc7f4a989b Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 29 Jan 2010 15:55:30 +1000 Subject: [PATCH 1513/1626] drm/radeon/kms: use active device to pick connector for encoder On the W500 we have UNIPHY routed to both DVI and DP, this seems to always pick the DVI connector which means link training fails. Switch to using active device to pick the connector, this seems like it should be safe from a code review, and it fixes things a bit more here. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 82eb551970b9..10746c9c8051 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -202,7 +202,7 @@ radeon_get_connector_for_encoder(struct drm_encoder *encoder) list_for_each_entry(connector, &dev->mode_config.connector_list, head) { radeon_connector = to_radeon_connector(connector); - if (radeon_encoder->devices & radeon_connector->devices) + if (radeon_encoder->active_device & radeon_connector->devices) return connector; } return NULL; From f28cf33945cc112f8ee835512b7440905dc29ad2 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 28 Jan 2010 17:15:25 +1000 Subject: [PATCH 1514/1626] drm/kms/radeon: pick digitial encoders smarter. (v3) booting a Lenovo W500 with LVDS + DP outputs showed up a TODO we had on our list, to pick a correct digital encoder block. The LVTMA encoder requires the second digital encoder, all others can use any encoder at all. This fixes the digital encoder selection logic to enable LVDS/DP combos to work okay. V2: fix silly addition of connector dig_block and cleanup the other places in the code that pick the encoder. V3: rename to dig_encoder and clean up further - also fix the picking algorithm. tested on Lenovo W500 + desktop 3650 cards. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_dp.c | 23 ++-- drivers/gpu/drm/radeon/radeon_encoders.c | 163 +++++++++++++---------- drivers/gpu/drm/radeon/radeon_mode.h | 2 +- 3 files changed, 99 insertions(+), 89 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 9c023d25aad0..71060114d5de 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -596,21 +596,14 @@ void dp_link_train(struct drm_encoder *encoder, return; dig_connector = radeon_connector->con_priv; - if (ASIC_IS_DCE32(rdev)) { - if (dig->dig_block) - enc_id |= ATOM_DP_CONFIG_DIG2_ENCODER; - else - enc_id |= ATOM_DP_CONFIG_DIG1_ENCODER; - if (dig_connector->linkb) - enc_id |= ATOM_DP_CONFIG_LINK_B; - else - enc_id |= ATOM_DP_CONFIG_LINK_A; - } else { - if (dig_connector->linkb) - enc_id |= ATOM_DP_CONFIG_DIG2_ENCODER | ATOM_DP_CONFIG_LINK_B; - else - enc_id |= ATOM_DP_CONFIG_DIG1_ENCODER | ATOM_DP_CONFIG_LINK_A; - } + if (dig->dig_encoder) + enc_id |= ATOM_DP_CONFIG_DIG2_ENCODER; + else + enc_id |= ATOM_DP_CONFIG_DIG1_ENCODER; + if (dig_connector->linkb) + enc_id |= ATOM_DP_CONFIG_LINK_B; + else + enc_id |= ATOM_DP_CONFIG_LINK_A; memset(link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); if (dig_connector->dp_clock == 270000) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 10746c9c8051..3c91724457ca 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -156,6 +156,26 @@ radeon_get_encoder_id(struct drm_device *dev, uint32_t supported_device, uint8_t return ret; } +static inline bool radeon_encoder_is_digital(struct drm_encoder *encoder) +{ + struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + switch (radeon_encoder->encoder_id) { + case ENCODER_OBJECT_ID_INTERNAL_LVDS: + case ENCODER_OBJECT_ID_INTERNAL_TMDS1: + case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1: + case ENCODER_OBJECT_ID_INTERNAL_LVTM1: + case ENCODER_OBJECT_ID_INTERNAL_DVO1: + case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1: + case ENCODER_OBJECT_ID_INTERNAL_DDI: + case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: + case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: + case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: + case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: + return true; + default: + return false; + } +} void radeon_link_encoder_connector(struct drm_device *dev) { @@ -676,31 +696,11 @@ atombios_dig_encoder_setup(struct drm_encoder *encoder, int action) memset(&args, 0, sizeof(args)); - if (ASIC_IS_DCE32(rdev)) { - if (dig->dig_block) - index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl); - else - index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl); - num = dig->dig_block + 1; - } else { - switch (radeon_encoder->encoder_id) { - case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: - /* XXX doesn't really matter which dig encoder we pick as long as it's - * not already in use - */ - if (dig_connector->linkb) - index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl); - else - index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl); - num = 1; - break; - case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: - /* Only dig2 encoder can drive LVTMA */ - index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl); - num = 2; - break; - } - } + if (dig->dig_encoder) + index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl); + else + index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl); + num = dig->dig_encoder + 1; atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev); @@ -822,7 +822,7 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); } if (ASIC_IS_DCE32(rdev)) { - if (dig->dig_block) + if (dig->dig_encoder == 1) args.v2.acConfig.ucEncoderSel = 1; if (dig_connector->linkb) args.v2.acConfig.ucLinkSel = 1; @@ -849,17 +849,16 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t args.v2.acConfig.fCoherentMode = 1; } } else { + args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL; + if (dig->dig_encoder) + args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER; + else + args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER; + switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: - /* XXX doesn't really matter which dig encoder we pick as long as it's - * not already in use - */ - if (dig_connector->linkb) - args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER; - else - args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER; if (rdev->flags & RADEON_IS_IGP) { if (radeon_encoder->pixel_clock > 165000) { if (dig_connector->igp_lane_info & 0x3) @@ -878,10 +877,6 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t } } break; - case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: - /* Only dig2 encoder can drive LVTMA */ - args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER; - break; } if (radeon_encoder->pixel_clock > 165000) @@ -1046,6 +1041,7 @@ atombios_set_encoder_crtc_source(struct drm_encoder *encoder) union crtc_sourc_param args; int index = GetIndexIntoMasterTable(COMMAND, SelectCRTC_Source); uint8_t frev, crev; + struct radeon_encoder_atom_dig *dig; memset(&args, 0, sizeof(args)); @@ -1109,40 +1105,16 @@ atombios_set_encoder_crtc_source(struct drm_encoder *encoder) case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: - if (ASIC_IS_DCE32(rdev)) { - if (radeon_crtc->crtc_id) - args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID; - else - args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID; - } else { - struct drm_connector *connector; - struct radeon_connector *radeon_connector; - struct radeon_connector_atom_dig *dig_connector; - - connector = radeon_get_connector_for_encoder(encoder); - if (!connector) - return; - radeon_connector = to_radeon_connector(connector); - if (!radeon_connector->con_priv) - return; - dig_connector = radeon_connector->con_priv; - - /* XXX doesn't really matter which dig encoder we pick as long as it's - * not already in use - */ - if (dig_connector->linkb) - args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID; - else - args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID; - } + case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: + dig = radeon_encoder->enc_priv; + if (dig->dig_encoder) + args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID; + else + args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID; break; case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1: args.v2.ucEncoderID = ASIC_INT_DVO_ENCODER_ID; break; - case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: - /* Only dig2 encoder can drive LVTMA */ - args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID; - break; case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1: if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID; @@ -1202,6 +1174,47 @@ atombios_apply_encoder_quirks(struct drm_encoder *encoder, } } +static int radeon_atom_pick_dig_encoder(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct radeon_device *rdev = dev->dev_private; + struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc); + struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_encoder *test_encoder; + struct radeon_encoder_atom_dig *dig; + uint32_t dig_enc_in_use = 0; + /* on DCE32 and encoder can driver any block so just crtc id */ + if (ASIC_IS_DCE32(rdev)) { + return radeon_crtc->crtc_id; + } + + /* on DCE3 - LVTMA can only be driven by DIGB */ + list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) { + struct radeon_encoder *radeon_test_encoder; + + if (encoder == test_encoder) + continue; + + if (!radeon_encoder_is_digital(test_encoder)) + continue; + + radeon_test_encoder = to_radeon_encoder(test_encoder); + dig = radeon_test_encoder->enc_priv; + + if (dig->dig_encoder >= 0) + dig_enc_in_use |= (1 << dig->dig_encoder); + } + + if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA) { + if (dig_enc_in_use & 0x2) + DRM_ERROR("LVDS required digital encoder 2 but it was in use - stealing\n"); + return 1; + } + if (!(dig_enc_in_use & 1)) + return 0; + return 1; +} + static void radeon_atom_encoder_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, @@ -1214,12 +1227,9 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, if (radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) { - if (radeon_encoder->enc_priv) { - struct radeon_encoder_atom_dig *dig; - - dig = radeon_encoder->enc_priv; - dig->dig_block = radeon_crtc->crtc_id; - } + struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; + if (dig) + dig->dig_encoder = radeon_atom_pick_dig_encoder(encoder); } radeon_encoder->pixel_clock = adjusted_mode->clock; @@ -1379,7 +1389,13 @@ static void radeon_atom_encoder_commit(struct drm_encoder *encoder) static void radeon_atom_encoder_disable(struct drm_encoder *encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct radeon_encoder_atom_dig *dig; radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); + + if (radeon_encoder_is_digital(encoder)) { + dig = radeon_encoder->enc_priv; + dig->dig_encoder = -1; + } radeon_encoder->active_device = 0; } @@ -1436,6 +1452,7 @@ radeon_atombios_set_dig_info(struct radeon_encoder *radeon_encoder) /* coherent mode by default */ dig->coherent_mode = true; + dig->dig_encoder = -1; return dig; } diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 96b851f92f4c..e81b2aeb6a8f 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -299,7 +299,7 @@ struct radeon_atom_ss { struct radeon_encoder_atom_dig { /* atom dig */ bool coherent_mode; - int dig_block; + int dig_encoder; /* -1 disabled, 0 DIGA, 1 DIGB */ /* atom lvds */ uint32_t lvds_misc; uint16_t panel_pwr_delay; From db78e27de7e29a6db6be7caf607cf803d84094aa Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Tue, 12 Jan 2010 18:49:43 +0100 Subject: [PATCH 1515/1626] drm/ttm: Avoid conflicting reserve_memtype during ttm_tt_set_page_caching. Fixes errors like: > reserve_ram_pages_type failed 0x15b7a000-0x15b7b000, track 0x8, req 0x10 when a BO is moved between WC and UC areas. Reported-by: Xavier Chantry Signed-off-by: Francisco Jerez Acked-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_tt.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index 9c2b1cc5dba5..e2123af7775a 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -198,17 +198,26 @@ EXPORT_SYMBOL(ttm_tt_populate); static inline int ttm_tt_set_page_caching(struct page *p, enum ttm_caching_state c_state) { + int ret = 0; + if (PageHighMem(p)) return 0; - switch (c_state) { - case tt_cached: - return set_pages_wb(p, 1); - case tt_wc: - return set_memory_wc((unsigned long) page_address(p), 1); - default: - return set_pages_uc(p, 1); + if (get_page_memtype(p) != -1) { + /* p isn't in the default caching state, set it to + * writeback first to free its current memtype. */ + + ret = set_pages_wb(p, 1); + if (ret) + return ret; } + + if (c_state == tt_wc) + ret = set_memory_wc((unsigned long) page_address(p), 1); + else if (c_state == tt_uncached) + ret = set_pages_uc(p, 1); + + return ret; } #else /* CONFIG_X86 */ static inline int ttm_tt_set_page_caching(struct page *p, From cdb6e375c3c84558ed2c13c5461b22e8f7b7980e Mon Sep 17 00:00:00 2001 From: John Kacur Date: Sun, 31 Jan 2010 20:38:02 +0100 Subject: [PATCH 1516/1626] =?UTF-8?q?drm/kms/radeon/agp:=20Fix=20warning,?= =?UTF-8?q?=20format=20=E2=80=98%d=E2=80=99=20expects=20type=20=E2=80=98in?= =?UTF-8?q?t=E2=80=99,=20but=20argument=204=20has=20type=20=E2=80=98size?= =?UTF-8?q?=5Ft=E2=80=99?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit - Fix warning by using %zu instead of %d for size_t - Fix spelling mistake, "to" should be "too". Signed-off-by: John Kacur Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_agp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c index c9ad7f5cc1ac..f58c5f462438 100644 --- a/drivers/gpu/drm/radeon/radeon_agp.c +++ b/drivers/gpu/drm/radeon/radeon_agp.c @@ -134,7 +134,7 @@ int radeon_agp_init(struct radeon_device *rdev) int ret; if (rdev->ddev->agp->agp_info.aper_size < 32) { - dev_warn(rdev->dev, "AGP aperture to small (%dM) " + dev_warn(rdev->dev, "AGP aperture too small (%zuM) " "need at least 32M, disabling AGP\n", rdev->ddev->agp->agp_info.aper_size); return -EINVAL; From 2dea2e29b9fad48c759aa406b5ea426bff4339af Mon Sep 17 00:00:00 2001 From: John Kacur Date: Sun, 31 Jan 2010 20:38:03 +0100 Subject: [PATCH 1517/1626] drm/kms/radeon/agp: Move the check of the aper_size after drm_acp_acquire and drm_agp_info First call drm_agp_acquire to check if agp has been acquired. Second call drm_agp_info to fill in the info data struct, including aper_size. Finally do the check to see if the aper_size makes sense. Signed-off-by: John Kacur Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_agp.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c index f58c5f462438..b634d9847667 100644 --- a/drivers/gpu/drm/radeon/radeon_agp.c +++ b/drivers/gpu/drm/radeon/radeon_agp.c @@ -133,13 +133,6 @@ int radeon_agp_init(struct radeon_device *rdev) bool is_v3; int ret; - if (rdev->ddev->agp->agp_info.aper_size < 32) { - dev_warn(rdev->dev, "AGP aperture too small (%zuM) " - "need at least 32M, disabling AGP\n", - rdev->ddev->agp->agp_info.aper_size); - return -EINVAL; - } - /* Acquire AGP. */ if (!rdev->ddev->agp->acquired) { ret = drm_agp_acquire(rdev->ddev); @@ -154,6 +147,14 @@ int radeon_agp_init(struct radeon_device *rdev) DRM_ERROR("Unable to get AGP info: %d\n", ret); return ret; } + + if (rdev->ddev->agp->agp_info.aper_size < 32) { + dev_warn(rdev->dev, "AGP aperture too small (%zuM) " + "need at least 32M, disabling AGP\n", + rdev->ddev->agp->agp_info.aper_size); + return -EINVAL; + } + mode.mode = info.mode; agp_status = (RREG32(RADEON_AGP_STATUS) | RADEON_AGPv3_MODE) & mode.mode; is_v3 = !!(agp_status & RADEON_AGPv3_MODE); From 4b866288be6ffaefaad9cec212cb09e3258a68ee Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 1 Feb 2010 11:22:10 +1000 Subject: [PATCH 1518/1626] drm/radeon/kms: release agp on error. if we get an error, release the AGP if we've acquired it already. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_agp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c index b634d9847667..c0681a5556dc 100644 --- a/drivers/gpu/drm/radeon/radeon_agp.c +++ b/drivers/gpu/drm/radeon/radeon_agp.c @@ -144,11 +144,13 @@ int radeon_agp_init(struct radeon_device *rdev) ret = drm_agp_info(rdev->ddev, &info); if (ret) { + drm_agp_release(rdev->ddev); DRM_ERROR("Unable to get AGP info: %d\n", ret); return ret; } if (rdev->ddev->agp->agp_info.aper_size < 32) { + drm_agp_release(rdev->ddev); dev_warn(rdev->dev, "AGP aperture too small (%zuM) " "need at least 32M, disabling AGP\n", rdev->ddev->agp->agp_info.aper_size); @@ -229,6 +231,7 @@ int radeon_agp_init(struct radeon_device *rdev) ret = drm_agp_enable(rdev->ddev, mode); if (ret) { DRM_ERROR("Unable to enable AGP (mode = 0x%lx)\n", mode.mode); + drm_agp_release(rdev->ddev); return ret; } From dd5fde6041d7ea30fcfedcc159a4cec8b01f73b2 Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Tue, 26 Jan 2010 17:10:48 +0000 Subject: [PATCH 1519/1626] drm/ttm: remove padding from ttm_ref_object on 64bit builds Re-order structure ttm_ref_object to remove 8 bytes of alignment padding on 64 bit builds, so shrinking its size from 72 to 64 bytes allowing it to fit into a smaller slab. Signed-off-by: Richard Kennedy Acked-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_object.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/ttm/ttm_object.c b/drivers/gpu/drm/ttm/ttm_object.c index 1099abac824b..75e9d6f86ba4 100644 --- a/drivers/gpu/drm/ttm/ttm_object.c +++ b/drivers/gpu/drm/ttm/ttm_object.c @@ -109,8 +109,8 @@ struct ttm_ref_object { struct drm_hash_item hash; struct list_head head; struct kref kref; - struct ttm_base_object *obj; enum ttm_ref_type ref_type; + struct ttm_base_object *obj; struct ttm_object_file *tfile; }; From fa5829b36539067f3c675f5d437531dedcfc4ad8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marcin=20Ko=C5=9Bcielnicki?= Date: Sat, 23 Jan 2010 10:25:28 +1000 Subject: [PATCH 1520/1626] drm/kms: Remove incorrect comment in struct drm_mode_modeinfo Signed-off-by: Dave Airlie --- include/drm/drm_mode.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h index bc4fdf27bd2e..c5ba1636613c 100644 --- a/include/drm/drm_mode.h +++ b/include/drm/drm_mode.h @@ -85,7 +85,7 @@ struct drm_mode_modeinfo { __u16 hdisplay, hsync_start, hsync_end, htotal, hskew; __u16 vdisplay, vsync_start, vsync_end, vtotal, vscan; - __u32 vrefresh; /* vertical refresh * 1000 */ + __u32 vrefresh; __u32 flags; __u32 type; From 110b20c3ddcfa98cc932aef3af2d59b4e0841f08 Mon Sep 17 00:00:00 2001 From: Austin Yuan Date: Thu, 21 Jan 2010 13:45:40 +0800 Subject: [PATCH 1521/1626] drm/ttm: remove unnecessary save_flags and ttm_flag_masked in ttm_bo_util.c Signed-off-by: Austin Yuan Acked-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo_util.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c index ceae52f45c39..3f72fe1ddf8b 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_util.c +++ b/drivers/gpu/drm/ttm/ttm_bo_util.c @@ -53,7 +53,6 @@ int ttm_bo_move_ttm(struct ttm_buffer_object *bo, { struct ttm_tt *ttm = bo->ttm; struct ttm_mem_reg *old_mem = &bo->mem; - uint32_t save_flags = old_mem->placement; int ret; if (old_mem->mem_type != TTM_PL_SYSTEM) { @@ -62,7 +61,6 @@ int ttm_bo_move_ttm(struct ttm_buffer_object *bo, ttm_flag_masked(&old_mem->placement, TTM_PL_FLAG_SYSTEM, TTM_PL_MASK_MEM); old_mem->mem_type = TTM_PL_SYSTEM; - save_flags = old_mem->placement; } ret = ttm_tt_set_placement_caching(ttm, new_mem->placement); @@ -77,7 +75,7 @@ int ttm_bo_move_ttm(struct ttm_buffer_object *bo, *old_mem = *new_mem; new_mem->mm_node = NULL; - ttm_flag_masked(&save_flags, new_mem->placement, TTM_PL_MASK_MEMTYPE); + return 0; } EXPORT_SYMBOL(ttm_bo_move_ttm); @@ -219,7 +217,6 @@ int ttm_bo_move_memcpy(struct ttm_buffer_object *bo, void *old_iomap; void *new_iomap; int ret; - uint32_t save_flags = old_mem->placement; unsigned long i; unsigned long page; unsigned long add = 0; @@ -270,7 +267,6 @@ out2: *old_mem = *new_mem; new_mem->mm_node = NULL; - ttm_flag_masked(&save_flags, new_mem->placement, TTM_PL_MASK_MEMTYPE); if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) && (ttm != NULL)) { ttm_tt_unbind(ttm); @@ -537,7 +533,6 @@ int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo, struct ttm_mem_type_manager *man = &bdev->man[new_mem->mem_type]; struct ttm_mem_reg *old_mem = &bo->mem; int ret; - uint32_t save_flags = old_mem->placement; struct ttm_buffer_object *ghost_obj; void *tmp_obj = NULL; @@ -598,7 +593,7 @@ int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo, *old_mem = *new_mem; new_mem->mm_node = NULL; - ttm_flag_masked(&save_flags, new_mem->placement, TTM_PL_MASK_MEMTYPE); + return 0; } EXPORT_SYMBOL(ttm_bo_move_accel_cleanup); From 8e19a951774a16cf2626292ae06fd2b62630e67e Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Sat, 30 Jan 2010 03:38:06 +0000 Subject: [PATCH 1522/1626] drm/vmwgfx: Correctly detect 3D Signed-off-by: Jakob Bornecrantz Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 2 ++ drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 1 + drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c | 19 +++++++++++++++++++ drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c | 2 +- 4 files changed, 23 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index dedd121d8fe7..f47ff2c05466 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -357,6 +357,8 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) dev_priv->pm_nb.notifier_call = vmwgfx_pm_notifier; register_pm_notifier(&dev_priv->pm_nb); + DRM_INFO("%s", vmw_fifo_have_3d(dev_priv) ? "Have 3D\n" : "No 3D\n"); + return 0; out_no_device: diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 50529a7f06fb..59acc51993f6 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -389,6 +389,7 @@ extern int vmw_fifo_send_fence(struct vmw_private *dev_priv, uint32_t *sequence); extern void vmw_fifo_ping_host(struct vmw_private *dev_priv, uint32_t reason); extern int vmw_fifo_mmap(struct file *filp, struct vm_area_struct *vma); +extern bool vmw_fifo_have_3d(struct vmw_private *dev_priv); /** * TTM glue - vmwgfx_ttm_glue.c diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index f7d5f70b52dd..4157547cc6e4 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -29,6 +29,25 @@ #include "drmP.h" #include "ttm/ttm_placement.h" +bool vmw_fifo_have_3d(struct vmw_private *dev_priv) +{ + __le32 __iomem *fifo_mem = dev_priv->mmio_virt; + uint32_t fifo_min, hwversion; + + fifo_min = ioread32(fifo_mem + SVGA_FIFO_MIN); + if (fifo_min <= SVGA_FIFO_3D_HWVERSION * sizeof(unsigned int)) + return false; + + hwversion = ioread32(fifo_mem + SVGA_FIFO_3D_HWVERSION); + if (hwversion == 0) + return false; + + if (hwversion < SVGA3D_HWVERSION_WS65_B1) + return false; + + return true; +} + int vmw_fifo_init(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo) { __le32 __iomem *fifo_mem = dev_priv->mmio_virt; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index 5fa6a4ed238a..778851f9f1d6 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -43,7 +43,7 @@ int vmw_getparam_ioctl(struct drm_device *dev, void *data, param->value = vmw_overlay_num_free_overlays(dev_priv); break; case DRM_VMW_PARAM_3D: - param->value = dev_priv->capabilities & SVGA_CAP_3D ? 1 : 0; + param->value = vmw_fifo_have_3d(dev_priv) ? 1 : 0; break; case DRM_VMW_PARAM_FIFO_OFFSET: param->value = dev_priv->mmio_start; From c188660f6dbb0df9febe1b841a16c66c28353c15 Mon Sep 17 00:00:00 2001 From: Peter Hanzel Date: Sat, 30 Jan 2010 03:38:07 +0000 Subject: [PATCH 1523/1626] drm/vmwgfx: Request SVGA version 2 and bail if not found This fixes the driver not loading on older versions of VMware. Signed-off-by: Peter Hanzel Signed-off-by: Jakob Bornecrantz Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index f47ff2c05466..a6e8f687fa64 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -209,6 +209,7 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) { struct vmw_private *dev_priv; int ret; + uint32_t svga_id; dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL); if (unlikely(dev_priv == NULL)) { @@ -239,6 +240,16 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) dev_priv->mmio_start = pci_resource_start(dev->pdev, 2); mutex_lock(&dev_priv->hw_mutex); + + vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2); + svga_id = vmw_read(dev_priv, SVGA_REG_ID); + if (svga_id != SVGA_ID_2) { + ret = -ENOSYS; + DRM_ERROR("Unsuported SVGA ID 0x%x\n", svga_id); + mutex_unlock(&dev_priv->hw_mutex); + goto out_err0; + } + dev_priv->capabilities = vmw_read(dev_priv, SVGA_REG_CAPABILITIES); if (dev_priv->capabilities & SVGA_CAP_GMR) { From 5ffdb658f605cbc420944e7c7eeec9fbb8a73772 Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Sat, 30 Jan 2010 03:38:08 +0000 Subject: [PATCH 1524/1626] drm/vmwgfx: Don't send bad flags to the host Signed-off-by: Jakob Bornecrantz Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 2 ++ drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 10 ++++++++++ drivers/gpu/drm/vmwgfx/vmwgfx_resource.c | 16 +++++++++++++++- 3 files changed, 27 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 59acc51993f6..135be9688c90 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -96,6 +96,8 @@ struct vmw_surface { struct drm_vmw_size *sizes; uint32_t num_sizes; + bool scanout; + /* TODO so far just a extra pointer */ struct vmw_cursor_snooper snooper; }; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 686692de209a..eeba6d1d06e4 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -707,6 +707,9 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev, if (ret) goto try_dmabuf; + if (!surface->scanout) + goto err_not_scanout; + ret = vmw_kms_new_framebuffer_surface(dev_priv, surface, &vfb, mode_cmd->width, mode_cmd->height); @@ -740,6 +743,13 @@ try_dmabuf: } return &vfb->base; + +err_not_scanout: + DRM_ERROR("surface not marked as scanout\n"); + /* vmw_user_surface_lookup takes one ref */ + vmw_surface_unreference(&surface); + + return NULL; } static int vmw_kms_fb_changed(struct drm_device *dev) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index e01db120efff..c7efbd47ab84 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -35,6 +35,11 @@ #define VMW_RES_SURFACE ttm_driver_type1 #define VMW_RES_STREAM ttm_driver_type2 +/* XXX: This isn't a real hardware flag, but just a hack for kernel to + * know about primary surfaces. Find a better way to accomplish this. + */ +#define SVGA3D_SURFACE_HINT_SCANOUT (1 << 9) + struct vmw_user_context { struct ttm_base_object base; struct vmw_resource res; @@ -599,8 +604,17 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, if (unlikely(ret != 0)) goto out_err1; + if (srf->flags & SVGA3D_SURFACE_HINT_SCANOUT) { + /* we should not send this flag down to hardware since + * its not a official one + */ + srf->flags &= ~SVGA3D_SURFACE_HINT_SCANOUT; + srf->scanout = true; + } else { + srf->scanout = false; + } - if (srf->flags & (1 << 9) && + if (srf->scanout && srf->num_sizes == 1 && srf->sizes[0].width == 64 && srf->sizes[0].height == 64 && From ff82f052d2a187dd0fa0e431ba70eb457c71a40e Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 22 Jan 2010 15:19:00 +0100 Subject: [PATCH 1525/1626] drm/radeon/kms: Bailout of blit if error happen & protect with mutex V3 If an error happen in r600_blit_prepare_copy report it rather than WARNING and keeping execution. For instance if ib allocation failed we did just warn about but then latter tried to access NULL ib ptr causing oops. This patch also protect r600_copy_blit with a mutex as otherwise one process might overwrite blit temporary data with new one possibly leading to GPU lockup. Should partialy or totaly fix: https://bugzilla.redhat.com/show_bug.cgi?id=553279 V2 failing blit initialization is not fatal, fallback to memcpy when this happen V3 init blit before startup as we pin in startup, remove duplicate code (this one was actualy tested unlike V2) Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 54 +++++++++++++------------- drivers/gpu/drm/radeon/r600_blit_kms.c | 7 +++- drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/rv770.c | 31 +++++++-------- 4 files changed, 48 insertions(+), 45 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index d0bd117a463a..b833b4b97162 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1788,23 +1788,24 @@ void r600_fence_ring_emit(struct radeon_device *rdev, radeon_ring_write(rdev, RB_INT_STAT); } -int r600_copy_dma(struct radeon_device *rdev, - uint64_t src_offset, - uint64_t dst_offset, - unsigned num_pages, - struct radeon_fence *fence) -{ - /* FIXME: implement */ - return 0; -} - int r600_copy_blit(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, unsigned num_pages, struct radeon_fence *fence) { - r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE); + int r; + + mutex_lock(&rdev->r600_blit.mutex); + rdev->r600_blit.vb_ib = NULL; + r = r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE); + if (r) { + if (rdev->r600_blit.vb_ib) + radeon_ib_free(rdev, &rdev->r600_blit.vb_ib); + mutex_unlock(&rdev->r600_blit.mutex); + return r; + } r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE); r600_blit_done_copy(rdev, fence); + mutex_unlock(&rdev->r600_blit.mutex); return 0; } @@ -1860,26 +1861,19 @@ int r600_startup(struct radeon_device *rdev) return r; } r600_gpu_init(rdev); - - if (!rdev->r600_blit.shader_obj) { - r = r600_blit_init(rdev); + /* pin copy shader into vram */ + if (rdev->r600_blit.shader_obj) { + r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); + if (unlikely(r != 0)) + return r; + r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM, + &rdev->r600_blit.shader_gpu_addr); + radeon_bo_unreserve(rdev->r600_blit.shader_obj); if (r) { - DRM_ERROR("radeon: failed blitter (%d).\n", r); + dev_err(rdev->dev, "(%d) pin blit object failed\n", r); return r; } } - - r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); - if (unlikely(r != 0)) - return r; - r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM, - &rdev->r600_blit.shader_gpu_addr); - radeon_bo_unreserve(rdev->r600_blit.shader_obj); - if (r) { - dev_err(rdev->dev, "(%d) pin blit object failed\n", r); - return r; - } - /* Enable IRQ */ r = r600_irq_init(rdev); if (r) { @@ -2051,6 +2045,12 @@ int r600_init(struct radeon_device *rdev) r = r600_pcie_gart_init(rdev); if (r) return r; + r = r600_blit_init(rdev); + if (r) { + r600_blit_fini(rdev); + rdev->asic->copy = NULL; + dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r); + } rdev->accel_working = true; r = r600_startup(rdev); diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index 2bedce477a97..af1c3ca8a4cb 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -449,6 +449,7 @@ int r600_blit_init(struct radeon_device *rdev) u32 packet2s[16]; int num_packet2s = 0; + mutex_init(&rdev->r600_blit.mutex); rdev->r600_blit.state_offset = 0; if (rdev->family >= CHIP_RV770) @@ -557,7 +558,8 @@ int r600_blit_prepare_copy(struct radeon_device *rdev, int size_bytes) int dwords_per_loop = 76, num_loops; r = r600_vb_ib_get(rdev); - WARN_ON(r); + if (r) + return r; /* set_render_target emits 2 extra dwords on rv6xx */ if (rdev->family > CHIP_R600 && rdev->family < CHIP_RV770) @@ -583,7 +585,8 @@ int r600_blit_prepare_copy(struct radeon_device *rdev, int size_bytes) ring_size += 5; /* done copy */ ring_size += 7; /* fence emit for done copy */ r = radeon_ring_lock(rdev, ring_size); - WARN_ON(r); + if (r) + return r; set_default_state(rdev); /* 14 */ set_shaders(rdev); /* 26 */ diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index f7df1a7e4413..2d5f2bfa7201 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -416,6 +416,7 @@ struct r600_ih { }; struct r600_blit { + struct mutex mutex; struct radeon_bo *shader_obj; u64 shader_gpu_addr; u32 vs_offset, ps_offset; diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index cf8f2b17d627..2d465768ac71 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -887,26 +887,19 @@ static int rv770_startup(struct radeon_device *rdev) return r; } rv770_gpu_init(rdev); - - if (!rdev->r600_blit.shader_obj) { - r = r600_blit_init(rdev); + /* pin copy shader into vram */ + if (rdev->r600_blit.shader_obj) { + r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); + if (unlikely(r != 0)) + return r; + r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM, + &rdev->r600_blit.shader_gpu_addr); + radeon_bo_unreserve(rdev->r600_blit.shader_obj); if (r) { - DRM_ERROR("radeon: failed blitter (%d).\n", r); + DRM_ERROR("failed to pin blit object %d\n", r); return r; } } - - r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); - if (unlikely(r != 0)) - return r; - r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM, - &rdev->r600_blit.shader_gpu_addr); - radeon_bo_unreserve(rdev->r600_blit.shader_obj); - if (r) { - DRM_ERROR("failed to pin blit object %d\n", r); - return r; - } - /* Enable IRQ */ r = r600_irq_init(rdev); if (r) { @@ -1062,6 +1055,12 @@ int rv770_init(struct radeon_device *rdev) r = r600_pcie_gart_init(rdev); if (r) return r; + r = r600_blit_init(rdev); + if (r) { + r600_blit_fini(rdev); + rdev->asic->copy = NULL; + dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r); + } rdev->accel_working = true; r = rv770_startup(rdev); From f71d0187987e691516cd10c2702f002c0e2f0edc Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 1 Feb 2010 11:35:47 +1000 Subject: [PATCH 1526/1626] drm/radeon/kms: move radeon KMS on/off switch out of staging. We are happy enough that the KMS driver is stable enough for enough people for the kms enable/disable to leave staging. Distros can now contemplate turning this on. Signed-off-by: Dave Airlie --- drivers/gpu/drm/Kconfig | 2 ++ drivers/staging/Kconfig | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 96eddd17e050..305c59003963 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -66,6 +66,8 @@ config DRM_RADEON If M is selected, the module will be called radeon. +source "drivers/gpu/drm/radeon/Kconfig" + config DRM_I810 tristate "Intel I810" depends on DRM && AGP && AGP_INTEL diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 9533ab60cdb5..28e9b04aee15 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -103,8 +103,6 @@ source "drivers/staging/line6/Kconfig" source "drivers/gpu/drm/vmwgfx/Kconfig" -source "drivers/gpu/drm/radeon/Kconfig" - source "drivers/gpu/drm/nouveau/Kconfig" source "drivers/staging/octeon/Kconfig" From bf647fafda6515adf5ba84249fd08f64b5a9ec21 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 1 Feb 2010 13:32:41 +1100 Subject: [PATCH 1527/1626] powerpc/pseries: Fix xics build without CONFIG_SMP desc->affinity doesn't exit in that case. Let's use a macro for the UP variant of get_irq_server(), it's the easiest way, avoids evaluating arguments. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/xics.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index d80f193cd871..1ee66db003be 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -191,11 +191,7 @@ static int get_irq_server(unsigned int virq, cpumask_t cpumask, return default_server; } #else -static int get_irq_server(unsigned int virq, cpumask_t cpumask, - unsigned int strict_check) -{ - return default_server; -} +#define get_irq_server(virq, cpumask, strict_check) (default_server) #endif static void xics_unmask_irq(unsigned int virq) From 17aafccab4352b422aa01fa6ebf82daff693a5b3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Fri, 22 Jan 2010 09:20:00 +0100 Subject: [PATCH 1528/1626] drm/radeon/kms: Fix oops after radeon_cs_parser_init() failure. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If radeon_cs_parser_init() fails, radeon_cs_ioctl() calls radeon_cs_parser_fini() with the non-zero error value. The latter dereferenced parser->ib which hasn't been initialized yet -> boom. Add a test for parser->ib being non-NULL before dereferencing it. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index 1496cb8658ef..1190148cf5e6 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -189,7 +189,7 @@ static void radeon_cs_parser_fini(struct radeon_cs_parser *parser, int error) { unsigned i; - if (error) { + if (error && parser->ib) { radeon_bo_list_unvalidate(&parser->validated, parser->ib->fence); } else { From 94f28da8409c6059135e89ac64a0839993124155 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Sat, 30 Jan 2010 10:20:59 +0000 Subject: [PATCH 1529/1626] powerpc: TIF_ABI_PENDING bit removal Here are the powerpc bits to remove TIF_ABI_PENDING now that set_personality() is called at the appropriate place in exec. Signed-off-by: Andreas Schwab Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/elf.h | 8 ++------ arch/powerpc/include/asm/thread_info.h | 2 -- arch/powerpc/kernel/process.c | 12 ------------ 3 files changed, 2 insertions(+), 20 deletions(-) diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h index 17828ad411eb..c376eda15313 100644 --- a/arch/powerpc/include/asm/elf.h +++ b/arch/powerpc/include/asm/elf.h @@ -235,14 +235,10 @@ typedef elf_vrregset_t elf_fpxregset_t; #ifdef __powerpc64__ # define SET_PERSONALITY(ex) \ do { \ - unsigned long new_flags = 0; \ if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ - new_flags = _TIF_32BIT; \ - if ((current_thread_info()->flags & _TIF_32BIT) \ - != new_flags) \ - set_thread_flag(TIF_ABI_PENDING); \ + set_thread_flag(TIF_32BIT); \ else \ - clear_thread_flag(TIF_ABI_PENDING); \ + clear_thread_flag(TIF_32BIT); \ if (personality(current->personality) != PER_LINUX32) \ set_personality(PER_LINUX | \ (current->personality & (~PER_MASK))); \ diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index c8b329255678..aa9d383a1c09 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -111,7 +111,6 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NOTIFY_RESUME 13 /* callback before returning to user */ #define TIF_FREEZE 14 /* Freezing for suspend */ #define TIF_RUNLATCH 15 /* Is the runlatch enabled? */ -#define TIF_ABI_PENDING 16 /* 32/64 bit switch needed */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1<thread.dabr) { From d6ad3e286d2c075a60b9f11075a2c55aeeeca2ad Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Wed, 27 Jan 2010 16:25:22 -0600 Subject: [PATCH 1530/1626] softlockup: Add sched_clock_tick() to avoid kernel warning on kgdb resume When CONFIG_HAVE_UNSTABLE_SCHED_CLOCK is set, sched_clock() gets the time from hardware such as the TSC on x86. In this configuration kgdb will report a softlock warning message on resuming or detaching from a debug session. Sequence of events in the problem case: 1) "cpu sched clock" and "hardware time" are at 100 sec prior to a call to kgdb_handle_exception() 2) Debugger waits in kgdb_handle_exception() for 80 sec and on exit the following is called ... touch_softlockup_watchdog() --> __raw_get_cpu_var(touch_timestamp) = 0; 3) "cpu sched clock" = 100s (it was not updated, because the interrupt was disabled in kgdb) but the "hardware time" = 180 sec 4) The first timer interrupt after resuming from kgdb_handle_exception updates the watchdog from the "cpu sched clock" update_process_times() { ... run_local_timers() --> softlockup_tick() --> check (touch_timestamp == 0) (it is "YES" here, we have set "touch_timestamp = 0" at kgdb) --> __touch_softlockup_watchdog() ***(A)--> reset "touch_timestamp" to "get_timestamp()" (Here, the "touch_timestamp" will still be set to 100s.) ... scheduler_tick() ***(B)--> sched_clock_tick() (update "cpu sched clock" to "hardware time" = 180s) ... } 5) The Second timer interrupt handler appears to have a large jump and trips the softlockup warning. update_process_times() { ... run_local_timers() --> softlockup_tick() --> "cpu sched clock" - "touch_timestamp" = 180s-100s > 60s --> printk "soft lockup error messages" ... } note: ***(A) reset "touch_timestamp" to "get_timestamp(this_cpu)" Why is "touch_timestamp" 100 sec, instead of 180 sec? When CONFIG_HAVE_UNSTABLE_SCHED_CLOCK is set, the call trace of get_timestamp() is: get_timestamp(this_cpu) -->cpu_clock(this_cpu) -->sched_clock_cpu(this_cpu) -->__update_sched_clock(sched_clock_data, now) The __update_sched_clock() function uses the GTOD tick value to create a window to normalize the "now" values. So if "now" value is too big for sched_clock_data, it will be ignored. The fix is to invoke sched_clock_tick() to update "cpu sched clock" in order to recover from this state. This is done by introducing the function touch_softlockup_watchdog_sync(). This allows kgdb to request that the sched clock is updated when the watchdog thread runs the first time after a resume from kgdb. [yong.zhang0@gmail.com: Use per cpu instead of an array] Signed-off-by: Jason Wessel Signed-off-by: Dongdong Deng Cc: kgdb-bugreport@lists.sourceforge.net Cc: peterz@infradead.org LKML-Reference: <1264631124-4837-2-git-send-email-jason.wessel@windriver.com> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 4 ++++ kernel/kgdb.c | 6 +++--- kernel/softlockup.c | 15 +++++++++++++++ 3 files changed, 22 insertions(+), 3 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 6f7bba93929b..89232151a9d0 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -310,6 +310,7 @@ extern void sched_show_task(struct task_struct *p); #ifdef CONFIG_DETECT_SOFTLOCKUP extern void softlockup_tick(void); extern void touch_softlockup_watchdog(void); +extern void touch_softlockup_watchdog_sync(void); extern void touch_all_softlockup_watchdogs(void); extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write, void __user *buffer, @@ -323,6 +324,9 @@ static inline void softlockup_tick(void) static inline void touch_softlockup_watchdog(void) { } +static inline void touch_softlockup_watchdog_sync(void) +{ +} static inline void touch_all_softlockup_watchdogs(void) { } diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 2eb517e23514..87f2cc557553 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -596,7 +596,7 @@ static void kgdb_wait(struct pt_regs *regs) /* Signal the primary CPU that we are done: */ atomic_set(&cpu_in_kgdb[cpu], 0); - touch_softlockup_watchdog(); + touch_softlockup_watchdog_sync(); clocksource_touch_watchdog(); local_irq_restore(flags); } @@ -1450,7 +1450,7 @@ acquirelock: (kgdb_info[cpu].task && kgdb_info[cpu].task->pid != kgdb_sstep_pid) && --sstep_tries) { atomic_set(&kgdb_active, -1); - touch_softlockup_watchdog(); + touch_softlockup_watchdog_sync(); clocksource_touch_watchdog(); local_irq_restore(flags); @@ -1550,7 +1550,7 @@ kgdb_restore: } /* Free kgdb_active */ atomic_set(&kgdb_active, -1); - touch_softlockup_watchdog(); + touch_softlockup_watchdog_sync(); clocksource_touch_watchdog(); local_irq_restore(flags); diff --git a/kernel/softlockup.c b/kernel/softlockup.c index d22579087e27..0d4c7898ab80 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -25,6 +25,7 @@ static DEFINE_SPINLOCK(print_lock); static DEFINE_PER_CPU(unsigned long, softlockup_touch_ts); /* touch timestamp */ static DEFINE_PER_CPU(unsigned long, softlockup_print_ts); /* print timestamp */ static DEFINE_PER_CPU(struct task_struct *, softlockup_watchdog); +static DEFINE_PER_CPU(bool, softlock_touch_sync); static int __read_mostly did_panic; int __read_mostly softlockup_thresh = 60; @@ -79,6 +80,12 @@ void touch_softlockup_watchdog(void) } EXPORT_SYMBOL(touch_softlockup_watchdog); +void touch_softlockup_watchdog_sync(void) +{ + __raw_get_cpu_var(softlock_touch_sync) = true; + __raw_get_cpu_var(softlockup_touch_ts) = 0; +} + void touch_all_softlockup_watchdogs(void) { int cpu; @@ -118,6 +125,14 @@ void softlockup_tick(void) } if (touch_ts == 0) { + if (unlikely(per_cpu(softlock_touch_sync, this_cpu))) { + /* + * If the time stamp was touched atomically + * make sure the scheduler tick is up to date. + */ + per_cpu(softlock_touch_sync, this_cpu) = false; + sched_clock_tick(); + } __touch_softlockup_watchdog(); return; } From bcf4dd43424cdfd8195f3955300a579fe58e9911 Mon Sep 17 00:00:00 2001 From: Gui Jianfeng Date: Mon, 1 Feb 2010 09:58:54 +0100 Subject: [PATCH 1531/1626] blk-cgroup: Fix potential deadlock in blk-cgroup I triggered a lockdep warning as following. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.33-rc2 #1 ------------------------------------------------------- test_io_control/7357 is trying to acquire lock: (blkio_list_lock){+.+...}, at: [] blkiocg_weight_write+0x82/0x9e but task is already holding lock: (&(&blkcg->lock)->rlock){......}, at: [] blkiocg_weight_write+0x3b/0x9e which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&(&blkcg->lock)->rlock){......}: [] validate_chain+0x8bc/0xb9c [] __lock_acquire+0x723/0x789 [] lock_acquire+0x90/0xa7 [] _raw_spin_lock_irqsave+0x27/0x5a [] blkiocg_add_blkio_group+0x1a/0x6d [] cfq_get_queue+0x225/0x3de [] cfq_set_request+0x217/0x42d [] elv_set_request+0x17/0x26 [] get_request+0x203/0x2c5 [] get_request_wait+0x18/0x10e [] __make_request+0x2ba/0x375 [] generic_make_request+0x28d/0x30f [] submit_bio+0x8a/0x8f [] submit_bh+0xf0/0x10f [] ll_rw_block+0xc0/0xf9 [] ext3_find_entry+0x319/0x544 [ext3] [] ext3_lookup+0x2c/0xb9 [ext3] [] do_lookup+0xd3/0x172 [] link_path_walk+0x5fb/0x95c [] path_walk+0x3c/0x81 [] do_path_lookup+0x21/0x8a [] do_filp_open+0xf0/0x978 [] open_exec+0x1b/0xb7 [] do_execve+0xbb/0x266 [] sys_execve+0x24/0x4a [] ptregs_execve+0x12/0x18 -> #1 (&(&q->__queue_lock)->rlock){..-.-.}: [] validate_chain+0x8bc/0xb9c [] __lock_acquire+0x723/0x789 [] lock_acquire+0x90/0xa7 [] _raw_spin_lock_irqsave+0x27/0x5a [] cfq_unlink_blkio_group+0x17/0x41 [] blkiocg_destroy+0x72/0xc7 [] cgroup_diput+0x4a/0xb2 [] dentry_iput+0x93/0xb7 [] d_kill+0x1c/0x36 [] dput+0xf5/0xfe [] do_rmdir+0x95/0xbe [] sys_rmdir+0x10/0x12 [] sysenter_do_call+0x12/0x32 -> #0 (blkio_list_lock){+.+...}: [] validate_chain+0x61c/0xb9c [] __lock_acquire+0x723/0x789 [] lock_acquire+0x90/0xa7 [] _raw_spin_lock+0x1e/0x4e [] blkiocg_weight_write+0x82/0x9e [] cgroup_file_write+0xc6/0x1c0 [] vfs_write+0x8c/0x116 [] sys_write+0x3b/0x60 [] sysenter_do_call+0x12/0x32 other info that might help us debug this: 1 lock held by test_io_control/7357: #0: (&(&blkcg->lock)->rlock){......}, at: [] blkiocg_weight_write+0x3b/0x9e stack backtrace: Pid: 7357, comm: test_io_control Not tainted 2.6.33-rc2 #1 Call Trace: [] print_circular_bug+0x91/0x9d [] validate_chain+0x61c/0xb9c [] __lock_acquire+0x723/0x789 [] lock_acquire+0x90/0xa7 [] ? blkiocg_weight_write+0x82/0x9e [] _raw_spin_lock+0x1e/0x4e [] ? blkiocg_weight_write+0x82/0x9e [] blkiocg_weight_write+0x82/0x9e [] cgroup_file_write+0xc6/0x1c0 [] ? trace_hardirqs_off+0xb/0xd [] ? cpu_clock+0x2e/0x44 [] ? security_file_permission+0xf/0x11 [] ? rw_verify_area+0x8a/0xad [] ? cgroup_file_write+0x0/0x1c0 [] vfs_write+0x8c/0x116 [] sys_write+0x3b/0x60 [] sysenter_do_call+0x12/0x32 To prevent deadlock, we should take locks as following sequence: blkio_list_lock -> queue_lock -> blkcg_lock. The following patch should fix this bug. Signed-off-by: Gui Jianfeng Signed-off-by: Jens Axboe --- block/blk-cgroup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index 1fa2654db0a6..e7dbbaf5fb3e 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -147,16 +147,16 @@ blkiocg_weight_write(struct cgroup *cgroup, struct cftype *cftype, u64 val) return -EINVAL; blkcg = cgroup_to_blkio_cgroup(cgroup); + spin_lock(&blkio_list_lock); spin_lock_irq(&blkcg->lock); blkcg->weight = (unsigned int)val; hlist_for_each_entry(blkg, n, &blkcg->blkg_list, blkcg_node) { - spin_lock(&blkio_list_lock); list_for_each_entry(blkiop, &blkio_list, list) blkiop->ops.blkio_update_group_weight_fn(blkg, blkcg->weight); - spin_unlock(&blkio_list_lock); } spin_unlock_irq(&blkcg->lock); + spin_unlock(&blkio_list_lock); return 0; } From 55f0b4c546d1c87cccba63dc0fc5eb70e2b41733 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Mon, 25 Jan 2010 11:23:24 -0600 Subject: [PATCH 1532/1626] GFS2: Don't withdraw on partial rindex entries ince gfs2 writes the rindex file a block at a time, and releases the exclusive lock after each block, it is possible that another process will grab the lock in the middle of the write. Since rindex entries are not an even divisor of blocks, that other process may see partial entries. On grows, this is fine. The process can simply ignore the the partial entires. Previously, the code withdrew when it saw partial entries. Now it simply ignores them. Signed-off-by: Benjamin Marzinski Signed-off-by: Steven Whitehouse --- fs/gfs2/rgrp.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 0608f490c295..6702b82b375c 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -591,11 +591,6 @@ static int gfs2_ri_update(struct gfs2_inode *ip) u64 rgrp_count = ip->i_disksize; int error; - if (do_div(rgrp_count, sizeof(struct gfs2_rindex))) { - gfs2_consist_inode(ip); - return -EIO; - } - clear_rgrpdi(sdp); file_ra_state_init(&ra_state, inode->i_mapping); From 7fe3ec6fe58d2bfe97fe7a5d731c29299a8ffd35 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Fri, 29 Jan 2010 15:20:34 +0000 Subject: [PATCH 1533/1626] GFS2: Fix previous patch The do_div() call needs to remain. Signed-off-by: Steven Whitehouse --- fs/gfs2/rgrp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 6702b82b375c..46534a554cce 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -591,6 +591,7 @@ static int gfs2_ri_update(struct gfs2_inode *ip) u64 rgrp_count = ip->i_disksize; int error; + do_div(rgrp_count, sizeof(struct gfs2_rindex)); clear_rgrpdi(sdp); file_ra_state_init(&ra_state, inode->i_mapping); From ea8d62dadd0217334fb2c5d60e7f89e14076ca10 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Fri, 29 Jan 2010 15:48:57 +0000 Subject: [PATCH 1534/1626] GFS2: Use GFP_NOFS for alloc structure This is called under a glock, so its a good plan to use GFP_NOFS Signed-off-by: Steven Whitehouse --- fs/gfs2/rgrp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 46534a554cce..503b842f3ba2 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -911,7 +911,7 @@ void gfs2_rgrp_repolish_clones(struct gfs2_rgrpd *rgd) struct gfs2_alloc *gfs2_alloc_get(struct gfs2_inode *ip) { BUG_ON(ip->i_alloc != NULL); - ip->i_alloc = kzalloc(sizeof(struct gfs2_alloc), GFP_KERNEL); + ip->i_alloc = kzalloc(sizeof(struct gfs2_alloc), GFP_NOFS); return ip->i_alloc; } From a2fad9bf26a1d44a8d31a5c4528108a2b9f468ab Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 4 Jan 2010 15:30:54 +0000 Subject: [PATCH 1535/1626] regulator: Specify REGULATOR_CHANGE_STATUS for WM835x LED constraints The WM8350 LED driver needs to be able to enable and disable the regulators it is using. Previously the core wasn't properly enforcing status change constraints so the driver was able to function but this has always been intended to be required. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Liam Girdwood --- drivers/regulator/wm8350-regulator.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 1bbff099a546..e7b89e704af6 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1504,7 +1504,8 @@ int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink, led->isink_init.consumer_supplies = &led->isink_consumer; led->isink_init.constraints.min_uA = 0; led->isink_init.constraints.max_uA = pdata->max_uA; - led->isink_init.constraints.valid_ops_mask = REGULATOR_CHANGE_CURRENT; + led->isink_init.constraints.valid_ops_mask + = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS; led->isink_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL; ret = wm8350_register_regulator(wm8350, isink, &led->isink_init); if (ret != 0) { @@ -1517,6 +1518,7 @@ int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink, led->dcdc_init.num_consumer_supplies = 1; led->dcdc_init.consumer_supplies = &led->dcdc_consumer; led->dcdc_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL; + led->dcdc_init.constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS; ret = wm8350_register_regulator(wm8350, dcdc, &led->dcdc_init); if (ret != 0) { platform_device_put(pdev); From 22f4bb68b301f4ab896e9b3b0431fdde962242d2 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Tue, 26 Jan 2010 20:39:33 +0100 Subject: [PATCH 1536/1626] MIPS: Alchemy: Fix dbdma ring destruction memory debugcheck. DBDMA descriptors need to be located at 32-byte aligned addresses; however kmalloc in conjunction with the SLAB allocator and CONFIG_DEBUG_SLUB enabled doesn't deliver any. The dbdma code works around that by allocating a larger area and realigning the start address within it. When freeing a channel however this adjustment is not taken into account which results in an oops: Kernel bug detected[#1]: [...] Call Trace: [<80186010>] cache_free_debugcheck+0x284/0x318 [<801869d8>] kfree+0xe8/0x2a0 [<8010b31c>] au1xxx_dbdma_chan_free+0x2c/0x7c [<80388dc8>] au1x_pcm_dbdma_free+0x34/0x4c [<80388fa8>] au1xpsc_pcm_close+0x28/0x38 [<80383cb8>] soc_codec_close+0x14c/0x1cc [<8036dbb4>] snd_pcm_release_substream+0x60/0xac [<8036dc40>] snd_pcm_release+0x40/0xa0 [<8018c7a8>] __fput+0x11c/0x228 [<80188f60>] filp_close+0x7c/0x98 [<80189018>] sys_close+0x9c/0xe4 [<801022a0>] stack_done+0x20/0x3c Fix this by recording the address delivered by kmalloc() and using it as parameter to kfree(). This fix is only necessary with the SLAB allocator and CONFIG_DEBUG_SLAB enabled; non-debug SLAB, SLUB do return nicely aligned addresses, debug-enabled SLUB currently panics early in the boot process. Signed-off-by: Manuel Lauss To: Linux-MIPS Cc: Manuel Lauss Patchwork: http://patchwork.linux-mips.org/patch/878/ Signed-off-by: Ralf Baechle --- arch/mips/alchemy/common/dbdma.c | 7 +++++-- arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h | 1 + 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index 5c68569344c1..f9201ca2295b 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -412,8 +412,11 @@ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries) if (desc_base == 0) return 0; + ctp->cdb_membase = desc_base; desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t)); - } + } else + ctp->cdb_membase = desc_base; + dp = (au1x_ddma_desc_t *)desc_base; /* Keep track of the base descriptor. */ @@ -831,7 +834,7 @@ void au1xxx_dbdma_chan_free(u32 chanid) au1xxx_dbdma_stop(chanid); - kfree((void *)ctp->chan_desc_base); + kfree((void *)ctp->cdb_membase); stp->dev_flags &= ~DEV_FLAGS_INUSE; dtp->dev_flags &= ~DEV_FLAGS_INUSE; diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h index 06f68f43800a..d206000fbfe2 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -305,6 +305,7 @@ typedef struct dbdma_chan_config { dbdev_tab_t *chan_dest; au1x_dma_chan_t *chan_ptr; au1x_ddma_desc_t *chan_desc_base; + u32 cdb_membase; /* kmalloc base of above */ au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr; void *chan_callparam; void (*chan_callback)(int, void *); From ba284b1f199ef7121489010da6614561a679eab6 Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Sun, 31 Jan 2010 19:38:52 +0000 Subject: [PATCH 1537/1626] MIPS: AR7: Fix USB slave mem range typo Signed-off-by: Alexander Clouter To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/919/ Signed-off-by: Ralf Baechle --- arch/mips/ar7/platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index 85169c08d8dc..f70a10a8cc96 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -202,7 +202,7 @@ static struct resource usb_res[] = { .name = "mem", .flags = IORESOURCE_MEM, .start = 0x03400000, - .end = 0x034001fff, + .end = 0x03401fff, }, }; From a996996dd75a9086b12d1cb4010f26e1748993f0 Mon Sep 17 00:00:00 2001 From: Matt Mackall Date: Fri, 29 Jan 2010 21:50:36 +1300 Subject: [PATCH 1538/1626] random: drop weird m_time/a_time manipulation No other driver does anything remotely like this that I know of except for the tty drivers, and I can't see any reason for random/urandom to do it. In fact, it's a (trivial, harmless) timing information leak. And obviously, it generates power- and flash-cycle wasting I/O, especially if combined with something like hwrngd. Also, it breaks ubifs's expectations. Signed-off-by: Matt Mackall Signed-off-by: Herbert Xu --- drivers/char/random.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 8258982b49ec..3495d6486b71 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1051,12 +1051,6 @@ random_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) /* like a named pipe */ } - /* - * If we gave the user some bytes, update the access time. - */ - if (count) - file_accessed(file); - return (count ? count : retval); } @@ -1116,8 +1110,6 @@ static ssize_t random_write(struct file *file, const char __user *buffer, if (ret) return ret; - inode->i_mtime = current_fs_time(inode->i_sb); - mark_inode_dirty(inode); return (ssize_t)count; } From a8d7ac279743077965afeca0c9ed748507b68e89 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 1 Feb 2010 09:17:56 +1100 Subject: [PATCH 1539/1626] crypto: padlock-sha - Add import/export support As the padlock driver for SHA uses a software fallback to perform partial hashing, it must implement custom import/export functions. Otherwise hmac which depends on import/export for prehashing will not work with padlock-sha. Reported-by: Wolfgang Walter Signed-off-by: Herbert Xu --- drivers/crypto/padlock-sha.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/crypto/padlock-sha.c b/drivers/crypto/padlock-sha.c index 0af80577dc7b..d3a27e0119bc 100644 --- a/drivers/crypto/padlock-sha.c +++ b/drivers/crypto/padlock-sha.c @@ -57,6 +57,23 @@ static int padlock_sha_update(struct shash_desc *desc, return crypto_shash_update(&dctx->fallback, data, length); } +static int padlock_sha_export(struct shash_desc *desc, void *out) +{ + struct padlock_sha_desc *dctx = shash_desc_ctx(desc); + + return crypto_shash_export(&dctx->fallback, out); +} + +static int padlock_sha_import(struct shash_desc *desc, const void *in) +{ + struct padlock_sha_desc *dctx = shash_desc_ctx(desc); + struct padlock_sha_ctx *ctx = crypto_shash_ctx(desc->tfm); + + dctx->fallback.tfm = ctx->fallback; + dctx->fallback.flags = desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP; + return crypto_shash_import(&dctx->fallback, in); +} + static inline void padlock_output_block(uint32_t *src, uint32_t *dst, size_t count) { @@ -235,7 +252,10 @@ static struct shash_alg sha1_alg = { .update = padlock_sha_update, .finup = padlock_sha1_finup, .final = padlock_sha1_final, + .export = padlock_sha_export, + .import = padlock_sha_import, .descsize = sizeof(struct padlock_sha_desc), + .statesize = sizeof(struct sha1_state), .base = { .cra_name = "sha1", .cra_driver_name = "sha1-padlock", @@ -256,7 +276,10 @@ static struct shash_alg sha256_alg = { .update = padlock_sha_update, .finup = padlock_sha256_finup, .final = padlock_sha256_final, + .export = padlock_sha_export, + .import = padlock_sha_import, .descsize = sizeof(struct padlock_sha_desc), + .statesize = sizeof(struct sha256_state), .base = { .cra_name = "sha256", .cra_driver_name = "sha256-padlock", From cd1510cb5f892907fe1a662f90b41fb3a42954e0 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 1 Feb 2010 21:48:28 +1100 Subject: [PATCH 1540/1626] random: Remove unused inode variable The previous changeset left behind an unused inode variable. This patch removes it. Reported-by: Stephen Rothwell Signed-off-by: Herbert Xu --- drivers/char/random.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 3495d6486b71..2849713d2231 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1101,7 +1101,6 @@ static ssize_t random_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) { size_t ret; - struct inode *inode = file->f_path.dentry->d_inode; ret = write_pool(&blocking_pool, buffer, count); if (ret) From dbead405801c8d5aa1bc21ab6e2a47f060d47c06 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 1 Feb 2010 18:50:40 +0100 Subject: [PATCH 1541/1626] ARM: 5909/1: ARM: Correct the FPSCR bits setting when raising exceptions Commit c98929c07a removed the clearing of the FPSCR[31:28] bits from the vfp_raise_exceptions() function and the new bits are or'ed with the old FPSCR bits leading to unexpected results (the original commit was referring to the cumulative bits - FPSCR[4:0]). Reported-by: Tom Hameenanttila Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/vfp/vfpmodule.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index f60a5400a25b..a63c4be99b36 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -197,10 +197,13 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_ } /* - * Update the FPSCR with the additional exception flags. + * If any of the status flags are set, update the FPSCR. * Comparison instructions always return at least one of * these flags set. */ + if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V)) + fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V); + fpscr |= exceptions; fmxr(FPSCR, fpscr); From ba9e9f3c08a5b58c1ffacf0cc6fb703ab0fa55ff Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 1 Feb 2010 21:23:46 -0200 Subject: [PATCH 1542/1626] saa7146: stop DMA before de-allocating DMA scatter/gather page buffers Thanks-to: Hartmut for pointing me the problem and testing the fix. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/saa7146_video.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index becbaadb3b77..5ed75263340a 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -1333,9 +1333,9 @@ static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) DEB_CAP(("vbuf:%p\n",vb)); - release_all_pagetables(dev, buf); - saa7146_dma_free(dev,q,buf); + + release_all_pagetables(dev, buf); } static struct videobuf_queue_ops video_qops = { From e8708ef7e86a463b3a5b01d4a9abf16c8748b464 Mon Sep 17 00:00:00 2001 From: Markus Pietrek Date: Tue, 2 Feb 2010 11:29:15 +0900 Subject: [PATCH 1543/1626] spi: spi_sh_msiof: Fixed data sampling on the correct edge The spi_sh_msiof.c driver presently misconfigures REDG and TEDG. TEDG==0 outputs data at the **rising edge** of the clock and REDG==0 samples data at the **falling edge** of the clock. Therefore for SPI, TEDG must be equal to REDG, otherwise the last byte received is not sampled in SPI mode 3. This brings the driver in line with the SH7723 HW Reference Manual settings documented in Figures 20.20 and 20.21 ("SPI Clock and data timing"). Signed-off-by: Markus Pietrek Acked-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/spi/spi_sh_msiof.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/spi/spi_sh_msiof.c b/drivers/spi/spi_sh_msiof.c index 51e5e1dfa6e5..30973ec16a93 100644 --- a/drivers/spi/spi_sh_msiof.c +++ b/drivers/spi/spi_sh_msiof.c @@ -173,15 +173,12 @@ static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p, int edge; /* - * CPOL CPHA TSCKIZ RSCKIZ TEDG REDG(!) - * 0 0 10 10 1 0 - * 0 1 10 10 0 1 - * 1 0 11 11 0 1 - * 1 1 11 11 1 0 - * - * (!) Note: REDG is inverted recommended data sheet setting + * CPOL CPHA TSCKIZ RSCKIZ TEDG REDG + * 0 0 10 10 1 1 + * 0 1 10 10 0 0 + * 1 0 11 11 0 0 + * 1 1 11 11 1 1 */ - sh_msiof_write(p, FCTR, 0); sh_msiof_write(p, TMDR1, 0xe2000005 | (lsb_first << 24)); sh_msiof_write(p, RMDR1, 0x22000005 | (lsb_first << 24)); @@ -193,7 +190,7 @@ static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p, edge = cpol ? cpha : !cpha; tmp |= edge << 27; /* TEDG */ - tmp |= !edge << 26; /* REDG */ + tmp |= edge << 26; /* REDG */ tmp |= (tx_hi_z ? 2 : 0) << 22; /* TXDIZ */ sh_msiof_write(p, CTR, tmp); } From e5ff15bec96ba18698dae5de0bbf7e6a0653ca65 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 27 Jan 2010 07:41:19 +0000 Subject: [PATCH 1544/1626] usb: r8a66597-hdc disable interrupts fix This patch improves disable_controller() in the r8a66597-hdc driver to disable all interrupts and clear status flags. It also makes sure that disable_controller() is called during probe(). This fixes the relatively rare case of unexpected pending interrupts after kexec reboot. Signed-off-by: Magnus Damm Acked-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- drivers/usb/host/r8a66597-hcd.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index b7a661c02bcd..0ceec123ddfd 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -216,8 +216,17 @@ static void disable_controller(struct r8a66597 *r8a66597) { int port; + /* disable interrupts */ r8a66597_write(r8a66597, 0, INTENB0); - r8a66597_write(r8a66597, 0, INTSTS0); + r8a66597_write(r8a66597, 0, INTENB1); + r8a66597_write(r8a66597, 0, BRDYENB); + r8a66597_write(r8a66597, 0, BEMPENB); + r8a66597_write(r8a66597, 0, NRDYENB); + + /* clear status */ + r8a66597_write(r8a66597, 0, BRDYSTS); + r8a66597_write(r8a66597, 0, NRDYSTS); + r8a66597_write(r8a66597, 0, BEMPSTS); for (port = 0; port < r8a66597->max_root_hub; port++) r8a66597_disable_port(r8a66597, port); @@ -2466,6 +2475,12 @@ static int __devinit r8a66597_probe(struct platform_device *pdev) r8a66597->rh_timer.data = (unsigned long)r8a66597; r8a66597->reg = (unsigned long)reg; + /* make sure no interrupts are pending */ + ret = r8a66597_clock_enable(r8a66597); + if (ret < 0) + goto clean_up3; + disable_controller(r8a66597); + for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) { INIT_LIST_HEAD(&r8a66597->pipe_queue[i]); init_timer(&r8a66597->td_timer[i]); From 00b3e0a2e059f0601feb537b995b0b4de531b543 Mon Sep 17 00:00:00 2001 From: Marek Skuczynski Date: Sat, 30 Jan 2010 22:27:41 +0100 Subject: [PATCH 1545/1626] sh: Fix access to released memory in dwarf_unwinder_cleanup() Signed-off-by: Marek Skuczynski Acked-by: Matt Fleming Signed-off-by: Paul Mundt --- arch/sh/kernel/dwarf.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c index 3576b709f052..88d28ec3780a 100644 --- a/arch/sh/kernel/dwarf.c +++ b/arch/sh/kernel/dwarf.c @@ -892,18 +892,18 @@ static struct unwinder dwarf_unwinder = { static void dwarf_unwinder_cleanup(void) { - struct dwarf_cie *cie; - struct dwarf_fde *fde; + struct dwarf_cie *cie, *cie_tmp; + struct dwarf_fde *fde, *fde_tmp; /* * Deallocate all the memory allocated for the DWARF unwinder. * Traverse all the FDE/CIE lists and remove and free all the * memory associated with those data structures. */ - list_for_each_entry(cie, &dwarf_cie_list, link) + list_for_each_entry_safe(cie, cie_tmp, &dwarf_cie_list, link) kfree(cie); - list_for_each_entry(fde, &dwarf_fde_list, link) + list_for_each_entry_safe(fde, fde_tmp, &dwarf_fde_list, link) kfree(fde); kmem_cache_destroy(dwarf_reg_cachep); From bc10e875d4aeaa93a0d418d8b4346b72f5067ea0 Mon Sep 17 00:00:00 2001 From: Marek Skuczynski Date: Sat, 30 Jan 2010 22:29:32 +0100 Subject: [PATCH 1546/1626] sh: Fix access to released memory in clk_debugfs_register_one() Signed-off-by: Marek Skuczynski Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/clock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index f3a46be2ae81..83da5debeedf 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -598,7 +598,7 @@ static struct dentry *clk_debugfs_root; static int clk_debugfs_register_one(struct clk *c) { int err; - struct dentry *d, *child; + struct dentry *d, *child, *child_tmp; struct clk *pa = c->parent; char s[255]; char *p = s; @@ -630,7 +630,7 @@ static int clk_debugfs_register_one(struct clk *c) err_out: d = c->dentry; - list_for_each_entry(child, &d->d_subdirs, d_u.d_child) + list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child) debugfs_remove(child); debugfs_remove(c->dentry); return err; From 55bdeed9f67a92f184e1ddcdd722e622d9dd10c6 Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Tue, 2 Feb 2010 07:48:40 -0800 Subject: [PATCH 1547/1626] be2net: use eq-id to calculate cev-isr reg offset cev-isr reg offset for each function is better calculated using (any) eq-id alloted to that function instead of using pci-func number(which does not work in some configurations...) Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 6f2633887dc3..626b76c0ebc7 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1350,7 +1350,7 @@ static irqreturn_t be_intx(int irq, void *dev) int isr; isr = ioread32(adapter->csr + CEV_ISR0_OFFSET + - be_pci_func(adapter) * CEV_ISR_SIZE); + (adapter->tx_eq.q.id/ 8) * CEV_ISR_SIZE); if (!isr) return IRQ_NONE; From 91dfc423cc8cfd399fb308a837102a7ab7fa067e Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 2 Feb 2010 08:52:20 -0800 Subject: [PATCH 1548/1626] MIPS: 64-bit: Detect virtual memory size Linux kernel 2.6.32 and later allocate address space from the top of the kernel virtual memory address space. This patch implements virtual memory size detection for 64 bit MIPS CPUs to avoid resulting crashes. Signed-off-by: Guenter Roeck Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/935/ Reviewed-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/include/asm/cpu-features.h | 7 +++++++ arch/mips/include/asm/cpu-info.h | 3 +++ arch/mips/include/asm/pgtable-64.h | 4 +++- arch/mips/kernel/cpu-probe.c | 11 +++++++++++ 4 files changed, 24 insertions(+), 1 deletion(-) diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index 1f4df647c384..272c5ef35bbb 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -191,6 +191,9 @@ # ifndef cpu_has_64bit_addresses # define cpu_has_64bit_addresses 0 # endif +# ifndef cpu_vmbits +# define cpu_vmbits 31 +# endif #endif #ifdef CONFIG_64BIT @@ -209,6 +212,10 @@ # ifndef cpu_has_64bit_addresses # define cpu_has_64bit_addresses 1 # endif +# ifndef cpu_vmbits +# define cpu_vmbits cpu_data[0].vmbits +# define __NEED_VMBITS_PROBE +# endif #endif #if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint) diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h index 126044308dec..b39def3f6e03 100644 --- a/arch/mips/include/asm/cpu-info.h +++ b/arch/mips/include/asm/cpu-info.h @@ -58,6 +58,9 @@ struct cpuinfo_mips { struct cache_desc tcache; /* Tertiary/split secondary cache */ int srsets; /* Shadow register sets */ int core; /* physical core number */ +#ifdef CONFIG_64BIT + int vmbits; /* Virtual memory size in bits */ +#endif #if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC) /* * In the MIPS MT "SMTC" model, each TC is considered diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index 9cd508993956..8eda30b467da 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -110,7 +110,9 @@ #define VMALLOC_START MAP_BASE #define VMALLOC_END \ (VMALLOC_START + \ - PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE - (1UL << 32)) + min(PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE, \ + (1UL << cpu_vmbits)) - (1UL << 32)) + #if defined(CONFIG_MODULES) && defined(KBUILD_64BIT_SYM32) && \ VMALLOC_START != CKSSEG /* Load modules into 32bit-compatible segment. */ diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 80e202eca056..9c187a64649b 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -284,6 +284,15 @@ static inline int __cpu_has_fpu(void) return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE); } +static inline void cpu_probe_vmbits(struct cpuinfo_mips *c) +{ +#ifdef __NEED_VMBITS_PROBE + write_c0_entryhi(0x3ffffffffffff000ULL); + back_to_back_c0_hazard(); + c->vmbits = fls64(read_c0_entryhi() & 0x3ffffffffffff000ULL); +#endif +} + #define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \ | MIPS_CPU_COUNTER) @@ -969,6 +978,8 @@ __cpuinit void cpu_probe(void) c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1; else c->srsets = 1; + + cpu_probe_vmbits(c); } __cpuinit void cpu_report(void) From 1efe8fe1c2240acc476bed77740883df63373862 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Tue, 2 Feb 2010 20:45:46 +0100 Subject: [PATCH 1549/1626] cfq-iosched: Do not idle on async queues Few weeks back, Shaohua Li had posted similar patch. I am reposting it with more test results. This patch does two things. - Do not idle on async queues. - It also changes the write queue depth CFQ drives (cfq_may_dispatch()). Currently, we seem to driving queue depth of 1 always for WRITES. This is true even if there is only one write queue in the system and all the logic of infinite queue depth in case of single busy queue as well as slowly increasing queue depth based on last delayed sync request does not seem to be kicking in at all. This patch will allow deeper WRITE queue depths (subjected to the other WRITE queue depth contstraints like cfq_quantum and last delayed sync request). Shaohua Li had reported getting more out of his SSD. For me, I have got one Lun exported from an HP EVA and when pure buffered writes are on, I can get more out of the system. Following are test results of pure buffered writes (with end_fsync=1) with vanilla and patched kernel. These results are average of 3 sets of run with increasing number of threads. AVERAGE[bufwfs][vanilla] ------- job Set NR ReadBW(KB/s) MaxClat(us) WriteBW(KB/s) MaxClat(us) --- --- -- ------------ ----------- ------------- ----------- bufwfs 3 1 0 0 95349 474141 bufwfs 3 2 0 0 100282 806926 bufwfs 3 4 0 0 109989 2.7301e+06 bufwfs 3 8 0 0 116642 3762231 bufwfs 3 16 0 0 118230 6902970 AVERAGE[bufwfs] [patched kernel] ------- bufwfs 3 1 0 0 270722 404352 bufwfs 3 2 0 0 206770 1.06552e+06 bufwfs 3 4 0 0 195277 1.62283e+06 bufwfs 3 8 0 0 260960 2.62979e+06 bufwfs 3 16 0 0 299260 1.70731e+06 I also ran buffered writes along with some sequential reads and some buffered reads going on in the system on a SATA disk because the potential risk could be that we should not be driving queue depth higher in presence of sync IO going to keep the max clat low. With some random and sequential reads going on in the system on one SATA disk I did not see any significant increase in max clat. So it looks like other WRITE queue depth control logic is doing its job. Here are the results. AVERAGE[brr, bsr, bufw together] [vanilla] ------- job Set NR ReadBW(KB/s) MaxClat(us) WriteBW(KB/s) MaxClat(us) --- --- -- ------------ ----------- ------------- ----------- brr 3 1 850 546345 0 0 bsr 3 1 14650 729543 0 0 bufw 3 1 0 0 23908 8274517 brr 3 2 981.333 579395 0 0 bsr 3 2 14149.7 1175689 0 0 bufw 3 2 0 0 21921 1.28108e+07 brr 3 4 898.333 1.75527e+06 0 0 bsr 3 4 12230.7 1.40072e+06 0 0 bufw 3 4 0 0 19722.3 2.4901e+07 brr 3 8 900 3160594 0 0 bsr 3 8 9282.33 1.91314e+06 0 0 bufw 3 8 0 0 18789.3 23890622 AVERAGE[brr, bsr, bufw mixed] [patched kernel] ------- job Set NR ReadBW(KB/s) MaxClat(us) WriteBW(KB/s) MaxClat(us) --- --- -- ------------ ----------- ------------- ----------- brr 3 1 837 417973 0 0 bsr 3 1 14357.7 591275 0 0 bufw 3 1 0 0 24869.7 8910662 brr 3 2 1038.33 543434 0 0 bsr 3 2 13351.3 1205858 0 0 bufw 3 2 0 0 18626.3 13280370 brr 3 4 913 1.86861e+06 0 0 bsr 3 4 12652.3 1430974 0 0 bufw 3 4 0 0 15343.3 2.81305e+07 brr 3 8 890 2.92695e+06 0 0 bsr 3 8 9635.33 1.90244e+06 0 0 bufw 3 8 0 0 17200.3 24424392 So looks like it might make sense to include this patch. Thanks Vivek Signed-off-by: Vivek Goyal Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index ee130f14d1fc..17b768d0d42f 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1803,7 +1803,7 @@ static bool cfq_should_idle(struct cfq_data *cfqd, struct cfq_queue *cfqq) * Otherwise, we do only if they are the last ones * in their service tree. */ - return service_tree->count == 1; + return service_tree->count == 1 && cfq_cfqq_sync(cfqq); } static void cfq_arm_slice_timer(struct cfq_data *cfqd) From 7ab02af428c2d312c0cf8fb0b01cc1eb21131a3d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 2 Feb 2010 12:37:44 -0800 Subject: [PATCH 1550/1626] Fix 'flush_old_exec()/setup_new_exec()' split Commit 221af7f87b9 ("Split 'flush_old_exec' into two functions") split the function at the point of no return - ie right where there were no more error cases to check. That made sense from a technical standpoint, but when we then also combined it with the actual personality setting going in between flush_old_exec() and setup_new_exec(), it needs to be a bit more careful. In particular, we need to make sure that we really flush the old personality bits in the 'flush' stage, rather than later in the 'setup' stage, since otherwise we might be flushing the _new_ personality state that we're just setting up. So this moves the flags and personality flushing (and 'flush_thread()', which is the arch-specific function that generally resets lazy FP state etc) of the old process into flush_old_exec(), so that it doesn't affect any state that execve() is setting up for the new process environment. This was reported by Michal Simek as breaking his Microblaze qemu environment. Reported-and-tested-by: Michal Simek Cc: Peter Anvin Signed-off-by: Linus Torvalds --- fs/exec.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index 675c3f44c2ea..0790a107ff7e 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -961,6 +961,11 @@ int flush_old_exec(struct linux_binprm * bprm) goto out; bprm->mm = NULL; /* We're using it now */ + + current->flags &= ~PF_RANDOMIZE; + flush_thread(); + current->personality &= ~bprm->per_clear; + return 0; out: @@ -997,9 +1002,6 @@ void setup_new_exec(struct linux_binprm * bprm) tcomm[i] = '\0'; set_task_comm(current, tcomm); - current->flags &= ~PF_RANDOMIZE; - flush_thread(); - /* Set the new mm task size. We have to do that late because it may * depend on TIF_32BIT which is only updated in flush_thread() on * some architectures like powerpc @@ -1015,8 +1017,6 @@ void setup_new_exec(struct linux_binprm * bprm) set_dumpable(current->mm, suid_dumpable); } - current->personality &= ~bprm->per_clear; - /* * Flush performance counters when crossing a * security domain: From de5604231ce4bc8db1bc1dcd27d8540cbedf1518 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Mon, 1 Feb 2010 22:24:18 +1100 Subject: [PATCH 1551/1626] mm: percpu-vmap fix RCU list walking RCU list walking of the per-cpu vmap cache was broken. It did not use RCU primitives, and also the union of free_list and rcu_head is obviously wrong (because free_list is indeed the list we are RCU walking). While we are there, remove a couple of unused fields from an earlier iteration. These APIs aren't actually used anywhere, because of problems with the XFS conversion. Christoph has now verified that the problems are solved with these patches. Also it is an exported interface, so I think it will be good to be merged now (and Christoph wants to get the XFS changes into their local tree). Cc: stable@kernel.org Cc: linux-mm@kvack.org Tested-by: Christoph Hellwig Signed-off-by: Nick Piggin -- Signed-off-by: Linus Torvalds --- mm/vmalloc.c | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index d55d905463eb..cf76ff6ba596 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -667,8 +667,6 @@ static bool vmap_initialized __read_mostly = false; struct vmap_block_queue { spinlock_t lock; struct list_head free; - struct list_head dirty; - unsigned int nr_dirty; }; struct vmap_block { @@ -678,10 +676,8 @@ struct vmap_block { unsigned long free, dirty; DECLARE_BITMAP(alloc_map, VMAP_BBMAP_BITS); DECLARE_BITMAP(dirty_map, VMAP_BBMAP_BITS); - union { - struct list_head free_list; - struct rcu_head rcu_head; - }; + struct list_head free_list; + struct rcu_head rcu_head; }; /* Queue of free and dirty vmap blocks, for allocation and flushing purposes */ @@ -757,7 +753,7 @@ static struct vmap_block *new_vmap_block(gfp_t gfp_mask) vbq = &get_cpu_var(vmap_block_queue); vb->vbq = vbq; spin_lock(&vbq->lock); - list_add(&vb->free_list, &vbq->free); + list_add_rcu(&vb->free_list, &vbq->free); spin_unlock(&vbq->lock); put_cpu_var(vmap_block_queue); @@ -776,8 +772,6 @@ static void free_vmap_block(struct vmap_block *vb) struct vmap_block *tmp; unsigned long vb_idx; - BUG_ON(!list_empty(&vb->free_list)); - vb_idx = addr_to_vb_idx(vb->va->va_start); spin_lock(&vmap_block_tree_lock); tmp = radix_tree_delete(&vmap_block_tree, vb_idx); @@ -816,7 +810,7 @@ again: vb->free -= 1UL << order; if (vb->free == 0) { spin_lock(&vbq->lock); - list_del_init(&vb->free_list); + list_del_rcu(&vb->free_list); spin_unlock(&vbq->lock); } spin_unlock(&vb->lock); @@ -860,11 +854,11 @@ static void vb_free(const void *addr, unsigned long size) BUG_ON(!vb); spin_lock(&vb->lock); - bitmap_allocate_region(vb->dirty_map, offset >> PAGE_SHIFT, order); + BUG_ON(bitmap_allocate_region(vb->dirty_map, offset >> PAGE_SHIFT, order)); vb->dirty += 1UL << order; if (vb->dirty == VMAP_BBMAP_BITS) { - BUG_ON(vb->free || !list_empty(&vb->free_list)); + BUG_ON(vb->free); spin_unlock(&vb->lock); free_vmap_block(vb); } else @@ -1033,8 +1027,6 @@ void __init vmalloc_init(void) vbq = &per_cpu(vmap_block_queue, i); spin_lock_init(&vbq->lock); INIT_LIST_HEAD(&vbq->free); - INIT_LIST_HEAD(&vbq->dirty); - vbq->nr_dirty = 0; } /* Import existing vmlist entries. */ From 02b709df817c0db174f249cc59e5f7fd01b64d92 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Mon, 1 Feb 2010 22:25:57 +1100 Subject: [PATCH 1552/1626] mm: purge fragmented percpu vmap blocks Improve handling of fragmented per-CPU vmaps. We previously don't free up per-CPU maps until all its addresses have been used and freed. So fragmented blocks could fill up vmalloc space even if they actually had no active vmap regions within them. Add some logic to allow all CPUs to have these blocks purged in the case of failure to allocate a new vm area, and also put some logic to trim such blocks of a current CPU if we hit them in the allocation path (so as to avoid a large build up of them). Christoph reported some vmap allocation failures when using the per CPU vmap APIs in XFS, which cannot be reproduced after this patch and the previous bug fix. Cc: linux-mm@kvack.org Cc: stable@kernel.org Tested-by: Christoph Hellwig Signed-off-by: Nick Piggin -- Signed-off-by: Linus Torvalds --- mm/vmalloc.c | 92 +++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 81 insertions(+), 11 deletions(-) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index cf76ff6ba596..ae007462b7f6 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -509,6 +509,9 @@ static unsigned long lazy_max_pages(void) static atomic_t vmap_lazy_nr = ATOMIC_INIT(0); +/* for per-CPU blocks */ +static void purge_fragmented_blocks_allcpus(void); + /* * Purges all lazily-freed vmap areas. * @@ -539,6 +542,9 @@ static void __purge_vmap_area_lazy(unsigned long *start, unsigned long *end, } else spin_lock(&purge_lock); + if (sync) + purge_fragmented_blocks_allcpus(); + rcu_read_lock(); list_for_each_entry_rcu(va, &vmap_area_list, list) { if (va->flags & VM_LAZY_FREE) { @@ -678,6 +684,7 @@ struct vmap_block { DECLARE_BITMAP(dirty_map, VMAP_BBMAP_BITS); struct list_head free_list; struct rcu_head rcu_head; + struct list_head purge; }; /* Queue of free and dirty vmap blocks, for allocation and flushing purposes */ @@ -782,12 +789,61 @@ static void free_vmap_block(struct vmap_block *vb) call_rcu(&vb->rcu_head, rcu_free_vb); } +static void purge_fragmented_blocks(int cpu) +{ + LIST_HEAD(purge); + struct vmap_block *vb; + struct vmap_block *n_vb; + struct vmap_block_queue *vbq = &per_cpu(vmap_block_queue, cpu); + + rcu_read_lock(); + list_for_each_entry_rcu(vb, &vbq->free, free_list) { + + if (!(vb->free + vb->dirty == VMAP_BBMAP_BITS && vb->dirty != VMAP_BBMAP_BITS)) + continue; + + spin_lock(&vb->lock); + if (vb->free + vb->dirty == VMAP_BBMAP_BITS && vb->dirty != VMAP_BBMAP_BITS) { + vb->free = 0; /* prevent further allocs after releasing lock */ + vb->dirty = VMAP_BBMAP_BITS; /* prevent purging it again */ + bitmap_fill(vb->alloc_map, VMAP_BBMAP_BITS); + bitmap_fill(vb->dirty_map, VMAP_BBMAP_BITS); + spin_lock(&vbq->lock); + list_del_rcu(&vb->free_list); + spin_unlock(&vbq->lock); + spin_unlock(&vb->lock); + list_add_tail(&vb->purge, &purge); + } else + spin_unlock(&vb->lock); + } + rcu_read_unlock(); + + list_for_each_entry_safe(vb, n_vb, &purge, purge) { + list_del(&vb->purge); + free_vmap_block(vb); + } +} + +static void purge_fragmented_blocks_thiscpu(void) +{ + purge_fragmented_blocks(smp_processor_id()); +} + +static void purge_fragmented_blocks_allcpus(void) +{ + int cpu; + + for_each_possible_cpu(cpu) + purge_fragmented_blocks(cpu); +} + static void *vb_alloc(unsigned long size, gfp_t gfp_mask) { struct vmap_block_queue *vbq; struct vmap_block *vb; unsigned long addr = 0; unsigned int order; + int purge = 0; BUG_ON(size & ~PAGE_MASK); BUG_ON(size > PAGE_SIZE*VMAP_MAX_ALLOC); @@ -800,24 +856,38 @@ again: int i; spin_lock(&vb->lock); + if (vb->free < 1UL << order) + goto next; + i = bitmap_find_free_region(vb->alloc_map, VMAP_BBMAP_BITS, order); - if (i >= 0) { - addr = vb->va->va_start + (i << PAGE_SHIFT); - BUG_ON(addr_to_vb_idx(addr) != - addr_to_vb_idx(vb->va->va_start)); - vb->free -= 1UL << order; - if (vb->free == 0) { - spin_lock(&vbq->lock); - list_del_rcu(&vb->free_list); - spin_unlock(&vbq->lock); + if (i < 0) { + if (vb->free + vb->dirty == VMAP_BBMAP_BITS) { + /* fragmented and no outstanding allocations */ + BUG_ON(vb->dirty != VMAP_BBMAP_BITS); + purge = 1; } - spin_unlock(&vb->lock); - break; + goto next; + } + addr = vb->va->va_start + (i << PAGE_SHIFT); + BUG_ON(addr_to_vb_idx(addr) != + addr_to_vb_idx(vb->va->va_start)); + vb->free -= 1UL << order; + if (vb->free == 0) { + spin_lock(&vbq->lock); + list_del_rcu(&vb->free_list); + spin_unlock(&vbq->lock); } spin_unlock(&vb->lock); + break; +next: + spin_unlock(&vb->lock); } + + if (purge) + purge_fragmented_blocks_thiscpu(); + put_cpu_var(vmap_block_queue); rcu_read_unlock(); From b8a1d37c5f981cdd2e83c9fd98198832324cd57a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 3 Feb 2010 09:31:36 +1100 Subject: [PATCH 1553/1626] kernel/cred.c: use kmem_cache_free Free memory allocated using kmem_cache_zalloc using kmem_cache_free rather than kfree. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,E,c; @@ x = \(kmem_cache_alloc\|kmem_cache_zalloc\|kmem_cache_alloc_node\)(c,...) ... when != x = E when != &x ?-kfree(x) +kmem_cache_free(c,x) // Signed-off-by: Julia Lawall Acked-by: David Howells Cc: James Morris Cc: Steve Dickson Cc: Signed-off-by: Andrew Morton Signed-off-by: James Morris --- kernel/cred.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/cred.c b/kernel/cred.c index dd76cfe5f5b0..1ed8ca18790c 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -224,7 +224,7 @@ struct cred *cred_alloc_blank(void) #ifdef CONFIG_KEYS new->tgcred = kzalloc(sizeof(*new->tgcred), GFP_KERNEL); if (!new->tgcred) { - kfree(new); + kmem_cache_free(cred_jar, new); return NULL; } atomic_set(&new->tgcred->usage, 1); From f98bfbd78c37c5946cc53089da32a5f741efdeb7 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Tue, 2 Feb 2010 15:58:48 -0800 Subject: [PATCH 1554/1626] connector: Delete buggy notification code. On Tue, Feb 02, 2010 at 02:57:14PM -0800, Greg KH (gregkh@suse.de) wrote: > > There are at least two ways to fix it: using a big cannon and a small > > one. The former way is to disable notification registration, since it is > > not used by anyone at all. Second way is to check whether calling > > process is root and its destination group is -1 (kind of priveledged > > one) before command is dispatched to workqueue. > > Well if no one is using it, removing it makes the most sense, right? > > No objection from me, care to make up a patch either way for this? Getting it is not used, let's drop support for notifications about (un)registered events from connector. Another option was to check credentials on receiving, but we can always restore it without bugs if needed, but genetlink has a wider code base and none complained, that userspace can not get notification when some other clients were (un)registered. Kudos for Sebastian Krahmer , who found a bug in the code. Signed-off-by: Evgeniy Polyakov Acked-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/connector/connector.c | 175 ---------------------------------- include/linux/connector.h | 32 ------- 2 files changed, 207 deletions(-) diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index f06024668f99..537c29ac4487 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -36,17 +36,6 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Evgeniy Polyakov "); MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector."); -static u32 cn_idx = CN_IDX_CONNECTOR; -static u32 cn_val = CN_VAL_CONNECTOR; - -module_param(cn_idx, uint, 0); -module_param(cn_val, uint, 0); -MODULE_PARM_DESC(cn_idx, "Connector's main device idx."); -MODULE_PARM_DESC(cn_val, "Connector's main device val."); - -static DEFINE_MUTEX(notify_lock); -static LIST_HEAD(notify_list); - static struct cn_dev cdev; static int cn_already_initialized; @@ -209,54 +198,6 @@ static void cn_rx_skb(struct sk_buff *__skb) } } -/* - * Notification routing. - * - * Gets id and checks if there are notification request for it's idx - * and val. If there are such requests notify the listeners with the - * given notify event. - * - */ -static void cn_notify(struct cb_id *id, u32 notify_event) -{ - struct cn_ctl_entry *ent; - - mutex_lock(¬ify_lock); - list_for_each_entry(ent, ¬ify_list, notify_entry) { - int i; - struct cn_notify_req *req; - struct cn_ctl_msg *ctl = ent->msg; - int idx_found, val_found; - - idx_found = val_found = 0; - - req = (struct cn_notify_req *)ctl->data; - for (i = 0; i < ctl->idx_notify_num; ++i, ++req) { - if (id->idx >= req->first && - id->idx < req->first + req->range) { - idx_found = 1; - break; - } - } - - for (i = 0; i < ctl->val_notify_num; ++i, ++req) { - if (id->val >= req->first && - id->val < req->first + req->range) { - val_found = 1; - break; - } - } - - if (idx_found && val_found) { - struct cn_msg m = { .ack = notify_event, }; - - memcpy(&m.id, id, sizeof(m.id)); - cn_netlink_send(&m, ctl->group, GFP_KERNEL); - } - } - mutex_unlock(¬ify_lock); -} - /* * Callback add routing - adds callback with given ID and name. * If there is registered callback with the same ID it will not be added. @@ -276,8 +217,6 @@ int cn_add_callback(struct cb_id *id, char *name, if (err) return err; - cn_notify(id, 0); - return 0; } EXPORT_SYMBOL_GPL(cn_add_callback); @@ -295,111 +234,9 @@ void cn_del_callback(struct cb_id *id) struct cn_dev *dev = &cdev; cn_queue_del_callback(dev->cbdev, id); - cn_notify(id, 1); } EXPORT_SYMBOL_GPL(cn_del_callback); -/* - * Checks two connector's control messages to be the same. - * Returns 1 if they are the same or if the first one is corrupted. - */ -static int cn_ctl_msg_equals(struct cn_ctl_msg *m1, struct cn_ctl_msg *m2) -{ - int i; - struct cn_notify_req *req1, *req2; - - if (m1->idx_notify_num != m2->idx_notify_num) - return 0; - - if (m1->val_notify_num != m2->val_notify_num) - return 0; - - if (m1->len != m2->len) - return 0; - - if ((m1->idx_notify_num + m1->val_notify_num) * sizeof(*req1) != - m1->len) - return 1; - - req1 = (struct cn_notify_req *)m1->data; - req2 = (struct cn_notify_req *)m2->data; - - for (i = 0; i < m1->idx_notify_num; ++i) { - if (req1->first != req2->first || req1->range != req2->range) - return 0; - req1++; - req2++; - } - - for (i = 0; i < m1->val_notify_num; ++i) { - if (req1->first != req2->first || req1->range != req2->range) - return 0; - req1++; - req2++; - } - - return 1; -} - -/* - * Main connector device's callback. - * - * Used for notification of a request's processing. - */ -static void cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp) -{ - struct cn_ctl_msg *ctl; - struct cn_ctl_entry *ent; - u32 size; - - if (msg->len < sizeof(*ctl)) - return; - - ctl = (struct cn_ctl_msg *)msg->data; - - size = (sizeof(*ctl) + ((ctl->idx_notify_num + - ctl->val_notify_num) * - sizeof(struct cn_notify_req))); - - if (msg->len != size) - return; - - if (ctl->len + sizeof(*ctl) != msg->len) - return; - - /* - * Remove notification. - */ - if (ctl->group == 0) { - struct cn_ctl_entry *n; - - mutex_lock(¬ify_lock); - list_for_each_entry_safe(ent, n, ¬ify_list, notify_entry) { - if (cn_ctl_msg_equals(ent->msg, ctl)) { - list_del(&ent->notify_entry); - kfree(ent); - } - } - mutex_unlock(¬ify_lock); - - return; - } - - size += sizeof(*ent); - - ent = kzalloc(size, GFP_KERNEL); - if (!ent) - return; - - ent->msg = (struct cn_ctl_msg *)(ent + 1); - - memcpy(ent->msg, ctl, size - sizeof(*ent)); - - mutex_lock(¬ify_lock); - list_add(&ent->notify_entry, ¬ify_list); - mutex_unlock(¬ify_lock); -} - static int cn_proc_show(struct seq_file *m, void *v) { struct cn_queue_dev *dev = cdev.cbdev; @@ -437,11 +274,8 @@ static const struct file_operations cn_file_ops = { static int __devinit cn_init(void) { struct cn_dev *dev = &cdev; - int err; dev->input = cn_rx_skb; - dev->id.idx = cn_idx; - dev->id.val = cn_val; dev->nls = netlink_kernel_create(&init_net, NETLINK_CONNECTOR, CN_NETLINK_USERS + 0xf, @@ -457,14 +291,6 @@ static int __devinit cn_init(void) cn_already_initialized = 1; - err = cn_add_callback(&dev->id, "connector", &cn_callback); - if (err) { - cn_already_initialized = 0; - cn_queue_free_dev(dev->cbdev); - netlink_kernel_release(dev->nls); - return -EINVAL; - } - proc_net_fops_create(&init_net, "connector", S_IRUGO, &cn_file_ops); return 0; @@ -478,7 +304,6 @@ static void __devexit cn_fini(void) proc_net_remove(&init_net, "connector"); - cn_del_callback(&dev->id); cn_queue_free_dev(dev->cbdev); netlink_kernel_release(dev->nls); } diff --git a/include/linux/connector.h b/include/linux/connector.h index 72ba63eb83c5..3a779ffba60b 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -24,9 +24,6 @@ #include -#define CN_IDX_CONNECTOR 0xffffffff -#define CN_VAL_CONNECTOR 0xffffffff - /* * Process Events connector unique ids -- used for message routing */ @@ -75,30 +72,6 @@ struct cn_msg { __u8 data[0]; }; -/* - * Notify structure - requests notification about - * registering/unregistering idx/val in range [first, first+range]. - */ -struct cn_notify_req { - __u32 first; - __u32 range; -}; - -/* - * Main notification control message - * *_notify_num - number of appropriate cn_notify_req structures after - * this struct. - * group - notification receiver's idx. - * len - total length of the attached data. - */ -struct cn_ctl_msg { - __u32 idx_notify_num; - __u32 val_notify_num; - __u32 group; - __u32 len; - __u8 data[0]; -}; - #ifdef __KERNEL__ #include @@ -151,11 +124,6 @@ struct cn_callback_entry { u32 seq, group; }; -struct cn_ctl_entry { - struct list_head notify_entry; - struct cn_ctl_msg *msg; -}; - struct cn_dev { struct cb_id id; From 859ddf09743a8cc680af33f7259ccd0fd36bfe9d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 2 Feb 2010 13:43:58 -0800 Subject: [PATCH 1555/1626] idr: fix a critical misallocation bug Eric Paris located a bug in idr. With IDR_BITS of 6, it grows to three layers when id 4096 is first allocated. When that happens, idr wraps incorrectly and searches the idr array ignoring the high bits. The following test code from Eric demonstrates the bug nicely. #include #include #include static DEFINE_IDR(test_idr); int init_module(void) { int ret, forty95, forty96; void *addr; /* add 2 entries both with 4095 as the start address */ again1: if (!idr_pre_get(&test_idr, GFP_KERNEL)) return -ENOMEM; ret = idr_get_new_above(&test_idr, (void *)4095, 4095, &forty95); if (ret) { if (ret == -EAGAIN) goto again1; return ret; } if (forty95 != 4095) printk(KERN_ERR "hmmm, forty95=%d\n", forty95); again2: if (!idr_pre_get(&test_idr, GFP_KERNEL)) return -ENOMEM; ret = idr_get_new_above(&test_idr, (void *)4096, 4095, &forty96); if (ret) { if (ret == -EAGAIN) goto again2; return ret; } if (forty96 != 4096) printk(KERN_ERR "hmmm, forty96=%d\n", forty96); /* try to find the 2 entries, noticing that 4096 broke */ addr = idr_find(&test_idr, forty95); if ((int)addr != forty95) printk(KERN_ERR "hmmm, after find forty95=%d addr=%d\n", forty95, (int)addr); addr = idr_find(&test_idr, forty96); if ((int)addr != forty96) printk(KERN_ERR "hmmm, after find forty96=%d addr=%d\n", forty96, (int)addr); /* really weird, the entry which should be at 4096 is actually at 0!! */ addr = idr_find(&test_idr, 0); if ((int)addr) printk(KERN_ERR "found an entry at id=0 for addr=%d\n", (int)addr); idr_remove(&test_idr, forty95); idr_remove(&test_idr, forty96); return 0; } void cleanup_module(void) { } MODULE_AUTHOR("Eric Paris "); MODULE_DESCRIPTION("Simple idr test"); MODULE_LICENSE("GPL"); This happens because when sub_alloc() back tracks it doesn't always do it step-by-step while the over-the-limit detection assumes step-by-step backtracking. The logic in sub_alloc() looks like the following. restart: clear pa[top level + 1] for end cond detection l = top level while (true) { search for empty slot at this level if (not found) { push id to the next possible value l++ A: if (pa[l] is clear) failed, return asking caller to grow the tree if (going up 1 level gives more slots to search) continue the while loop above with the incremented l else C: goto restart } adjust id accordingly to the found slot if (l == 0) return found id; create lower level if not there yet record pa[l] and l-- } Test A is the fail exit condition but this assumes that failure is propagated upwared one level at a time but the B optimization path breaks the assumption and restarts the whole thing with a start value which is above the possible limit with the current layers. sub_alloc() assumes the start id value is inside the limit when called and test A is the only exit condition check, so it ends up searching for empty slot while ignoring high set bit. So, for 4095->4096 test, level0 search fails but pa[1] contains a valid pointer. However, going up 1 level wouldn't give any more empty slot so it takes C and when the whole thing restarts nobody notices the high bit set beyond the top level. This patch fixes the bug by changing the fail exit condition check to full id limit check. Based-on-patch-from: Eric Paris Reported-by: Eric Paris Signed-off-by: Tejun Heo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/idr.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/lib/idr.c b/lib/idr.c index 1cac726c44bc..ba7d37cf7847 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -140,8 +140,7 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa) id = *starting_id; restart: p = idp->top; - l = idp->layers; - pa[l--] = NULL; + l = p->layer; while (1) { /* * We run around this while until we reach the leaf node... @@ -155,8 +154,8 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa) oid = id; id = (id | ((1 << (IDR_BITS * l)) - 1)) + 1; - /* if already at the top layer, we need to grow */ - if (!(p = pa[l])) { + /* did id go over the limit? */ + if (id >= (1 << (idp->layers * IDR_BITS))) { *starting_id = id; return IDR_NEED_TO_GROW; } From b3cb53721890879d7bde31f5f9eefd4edf41ab64 Mon Sep 17 00:00:00 2001 From: Alberto Panizzo Date: Tue, 2 Feb 2010 13:43:59 -0800 Subject: [PATCH 1556/1626] mx3fb: some debug and initialisation fixes Fix the kernel oops when dev_dbg is called with mx3_fbi->txd == NULL Fix the late initialisation of mx3fb->backlight_level. If not, in the chain of function started by init_fb_chan(), in __blank() call sdc_set_brightness(mx3fb, mx3fb->backlight_level) that will shut down the CONTRAST PWM output. Signed-off-by: Alberto Panizzo Acked-by: Guennadi Liakhovetski gmx.de> Cc: Sascha Hauer Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/mx3fb.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 054ef29be479..772ba3f45e6f 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -324,8 +324,11 @@ static void sdc_enable_channel(struct mx3fb_info *mx3_fbi) unsigned long flags; dma_cookie_t cookie; - dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, - to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); + if (mx3_fbi->txd) + dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, + to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); + else + dev_dbg(mx3fb->dev, "mx3fbi %p, txd = NULL\n", mx3_fbi); /* This enables the channel */ if (mx3_fbi->cookie < 0) { @@ -646,6 +649,7 @@ static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t a static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value) { + dev_dbg(mx3fb->dev, "%s: value = %d\n", __func__, value); /* This might be board-specific */ mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL); return; @@ -1486,12 +1490,12 @@ static int mx3fb_probe(struct platform_device *pdev) goto ersdc0; } + mx3fb->backlight_level = 255; + ret = init_fb_chan(mx3fb, to_idmac_chan(chan)); if (ret < 0) goto eisdc0; - mx3fb->backlight_level = 255; - return 0; eisdc0: From f4b5162820de60204afa5c8639335f4931b7fb0c Mon Sep 17 00:00:00 2001 From: Sergey Matyukevich Date: Tue, 2 Feb 2010 13:43:59 -0800 Subject: [PATCH 1557/1626] rtc-fm3130: add missing braces Add missing braces for multiline 'if' statements in fm3130_probe. Signed-off-by: Sergey Matyukevich Signed-off-by: Alessandro Zummo Cc: Sergey Lapin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-fm3130.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c index 3a7be11cc6b9..812c66755083 100644 --- a/drivers/rtc/rtc-fm3130.c +++ b/drivers/rtc/rtc-fm3130.c @@ -376,20 +376,22 @@ static int __devinit fm3130_probe(struct i2c_client *client, } /* Disabling calibration mode */ - if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) { i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL] & ~(FM3130_RTC_CONTROL_BIT_CAL)); dev_warn(&client->dev, "Disabling calibration mode!\n"); + } /* Disabling read and write modes */ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE || - fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) + fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) { i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL] & ~(FM3130_RTC_CONTROL_BIT_READ | FM3130_RTC_CONTROL_BIT_WRITE)); dev_warn(&client->dev, "Disabling READ or WRITE mode!\n"); + } /* oscillator off? turn it on, so clock can tick. */ if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN) From bc173f7092c76a7967f135c2b3a54052ad99733b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 2 Feb 2010 13:44:01 -0800 Subject: [PATCH 1558/1626] kfifo: fix kernel-doc notation Fix kfifo kernel-doc warnings: Warning(kernel/kfifo.c:361): No description found for parameter 'total' Warning(kernel/kfifo.c:402): bad line: @ @lenout: pointer to output variable with copied data Warning(kernel/kfifo.c:412): No description found for parameter 'lenout' Signed-off-by: Randy Dunlap Cc: Stefani Seibold Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/kfifo.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/kfifo.c b/kernel/kfifo.c index 32c5c15d750d..498cabba225e 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -349,6 +349,7 @@ EXPORT_SYMBOL(__kfifo_from_user_n); * @fifo: the fifo to be used. * @from: pointer to the data to be added. * @len: the length of the data to be added. + * @total: the actual returned data length. * * This function copies at most @len bytes from the @from into the * FIFO depending and returns -EFAULT/0. @@ -399,7 +400,7 @@ EXPORT_SYMBOL(__kfifo_to_user_n); * @fifo: the fifo to be used. * @to: where the data must be copied. * @len: the size of the destination buffer. - @ @lenout: pointer to output variable with copied data + * @lenout: pointer to output variable with copied data * * This function copies at most @len bytes from the FIFO into the * @to buffer and 0 or -EFAULT. From 931e80e4b3263db75c8e34f078d22f11bbabd3a3 Mon Sep 17 00:00:00 2001 From: anfei zhou Date: Tue, 2 Feb 2010 13:44:02 -0800 Subject: [PATCH 1559/1626] mm: flush dcache before writing into page to avoid alias The cache alias problem will happen if the changes of user shared mapping is not flushed before copying, then user and kernel mapping may be mapped into two different cache line, it is impossible to guarantee the coherence after iov_iter_copy_from_user_atomic. So the right steps should be: flush_dcache_page(page); kmap_atomic(page); write to page; kunmap_atomic(page); flush_dcache_page(page); More precisely, we might create two new APIs flush_dcache_user_page and flush_dcache_kern_page to replace the two flush_dcache_page accordingly. Here is a snippet tested on omap2430 with VIPT cache, and I think it is not ARM-specific: int val = 0x11111111; fd = open("abc", O_RDWR); addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); *(addr+0) = 0x44444444; tmp = *(addr+0); *(addr+1) = 0x77777777; write(fd, &val, sizeof(int)); close(fd); The results are not always 0x11111111 0x77777777 at the beginning as expected. Sometimes we see 0x44444444 0x77777777. Signed-off-by: Anfei Cc: Russell King Cc: Miklos Szeredi Cc: Nick Piggin Cc: Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fuse/file.c | 3 +++ mm/filemap.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index c18913a777ae..a9f5e137f1d3 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -828,6 +828,9 @@ static ssize_t fuse_fill_write_pages(struct fuse_req *req, if (!page) break; + if (mapping_writably_mapped(mapping)) + flush_dcache_page(page); + pagefault_disable(); tmp = iov_iter_copy_from_user_atomic(page, ii, offset, bytes); pagefault_enable(); diff --git a/mm/filemap.c b/mm/filemap.c index e3736923220e..698ea80f2102 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -2232,6 +2232,9 @@ again: if (unlikely(status)) break; + if (mapping_writably_mapped(mapping)) + flush_dcache_page(page); + pagefault_disable(); copied = iov_iter_copy_from_user_atomic(page, i, offset, bytes); pagefault_enable(); From 325fda71d0badc1073dc59f12a948f24ff05796a Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 2 Feb 2010 13:44:05 -0800 Subject: [PATCH 1560/1626] devmem: check vmalloc address on kmem read/write Otherwise vmalloc_to_page() will BUG(). This also makes the kmem read/write implementation aligned with mem(4): "References to nonexistent locations cause errors to be returned." Here we return -ENXIO (inspired by Hugh) if no bytes have been transfered to/from user space, otherwise return partial read/write results. Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Wu Fengguang Cc: Greg Kroah-Hartman Cc: Hugh Dickins Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/mem.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/drivers/char/mem.c b/drivers/char/mem.c index be832b6f8279..1fd4b110d815 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -395,6 +395,7 @@ static ssize_t read_kmem(struct file *file, char __user *buf, unsigned long p = *ppos; ssize_t low_count, read, sz; char * kbuf; /* k-addr because vread() takes vmlist_lock rwlock */ + int err = 0; read = 0; if (p < (unsigned long) high_memory) { @@ -441,12 +442,16 @@ static ssize_t read_kmem(struct file *file, char __user *buf, return -ENOMEM; while (count > 0) { sz = size_inside_page(p, count); + if (!is_vmalloc_or_module_addr((void *)p)) { + err = -ENXIO; + break; + } sz = vread(kbuf, (char *)p, sz); if (!sz) break; if (copy_to_user(buf, kbuf, sz)) { - free_page((unsigned long)kbuf); - return -EFAULT; + err = -EFAULT; + break; } count -= sz; buf += sz; @@ -455,8 +460,8 @@ static ssize_t read_kmem(struct file *file, char __user *buf, } free_page((unsigned long)kbuf); } - *ppos = p; - return read; + *ppos = p; + return read ? read : err; } @@ -520,6 +525,7 @@ static ssize_t write_kmem(struct file * file, const char __user * buf, ssize_t wrote = 0; ssize_t virtr = 0; char * kbuf; /* k-addr because vwrite() takes vmlist_lock rwlock */ + int err = 0; if (p < (unsigned long) high_memory) { unsigned long to_write = min_t(unsigned long, count, @@ -540,12 +546,14 @@ static ssize_t write_kmem(struct file * file, const char __user * buf, unsigned long sz = size_inside_page(p, count); unsigned long n; + if (!is_vmalloc_or_module_addr((void *)p)) { + err = -ENXIO; + break; + } n = copy_from_user(kbuf, buf, sz); if (n) { - if (wrote + virtr) - break; - free_page((unsigned long)kbuf); - return -EFAULT; + err = -EFAULT; + break; } sz = vwrite(kbuf, (char *)p, sz); count -= sz; @@ -556,8 +564,8 @@ static ssize_t write_kmem(struct file * file, const char __user * buf, free_page((unsigned long)kbuf); } - *ppos = p; - return virtr + wrote; + *ppos = p; + return virtr + wrote ? : err; } #endif From c85e9a97c4102ce2e83112da850d838cfab5ab13 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Tue, 2 Feb 2010 13:44:06 -0800 Subject: [PATCH 1561/1626] devmem: fix kmem write bug on memory holes write_kmem() used to assume vwrite() always return the full buffer length. However now vwrite() could return 0 to indicate memory hole. This creates a bug that "buf" is not advanced accordingly. Fix it to simply ignore the return value, hence the memory hole. Signed-off-by: Wu Fengguang Cc: Andi Kleen Cc: Benjamin Herrenschmidt Cc: Christoph Lameter Cc: Ingo Molnar Cc: Tejun Heo Cc: Nick Piggin Cc: KAMEZAWA Hiroyuki Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 1fd4b110d815..48788db4e280 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -555,7 +555,7 @@ static ssize_t write_kmem(struct file * file, const char __user * buf, err = -EFAULT; break; } - sz = vwrite(kbuf, (char *)p, sz); + vwrite(kbuf, (char *)p, sz); count -= sz; buf += sz; virtr += sz; From 99cf611613f8826f52c156810bfb9e34c71d193a Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Tue, 2 Feb 2010 13:44:07 -0800 Subject: [PATCH 1562/1626] get_maintainer.pl: teach git log to use --no-color When git has been set to always use color in .gitconfig then I get the warning message Bad divisor in main::vcs_assign: 0 This is caused by vcs_file_signoffs not matching any commits due to the pattern not understand the colour codes. Fix this by telling git log to never use colour. Signed-off-by: Richard Kennedy Acked-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 090f24839700..2f3230db7ffb 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -74,8 +74,8 @@ my %VCS_cmds; my %VCS_cmds_git = ( "execute_cmd" => \&git_execute_cmd, "available" => '(which("git") ne "") && (-d ".git")', - "find_signers_cmd" => "git log --since=\$email_git_since -- \$file", - "find_commit_signers_cmd" => "git log -1 \$commit", + "find_signers_cmd" => "git log --no-color --since=\$email_git_since -- \$file", + "find_commit_signers_cmd" => "git log --no-color -1 \$commit", "blame_range_cmd" => "git blame -l -L \$diff_start,+\$diff_length \$file", "blame_file_cmd" => "git blame -l \$file", "commit_pattern" => "^commit [0-9a-f]{40,40}", From ef2b9b054580ef835078d8aa411bd06542cd5c1c Mon Sep 17 00:00:00 2001 From: Hui Zhu Date: Tue, 2 Feb 2010 13:44:09 -0800 Subject: [PATCH 1563/1626] markup_oops.pl: fix $func_offset error with x86_64 When I use markup_oops.pl parse a x8664 oops, I got: objdump: --start-address: bad number: NaN No matching code found This is because: main::(./m.pl:228): open(FILE, "objdump -dS --adjust-vma=$vmaoffset --start-address=$decodestart --stop-address=$decodestop $filename |") || die "Cannot start objdump"; DB<3> p $decodestart NaN This NaN is from: main::(./m.pl:176): my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset"); DB<2> p $func_offset 0x175 There is already a "0x" in $func_offset, another 0x makes it a NaN. The $func_offset is from line: if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) { $function = $1; $func_offset = $2; } I make a patch to change "(0x[0-9a-f]+)\/0x[a-f0-9]/)" to "0x([0-9a-f]+)\/0x[a-f0-9]/)". Signed-off-by: Hui Zhu Cc: Arjan van de Ven Cc: Michal Marek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/markup_oops.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl index ce3e40b01e48..e950f9cde019 100644 --- a/scripts/markup_oops.pl +++ b/scripts/markup_oops.pl @@ -158,7 +158,7 @@ while () { $function = $1; $func_offset = $2; } - if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) { + if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) { $function = $1; $func_offset = $2; } From 4528fd0595847c2078b59f24800e751c2d6b7e41 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 2 Feb 2010 13:44:10 -0800 Subject: [PATCH 1564/1626] cgroups: fix to return errno in a failure path In cgroup_create(), if alloc_css_id() returns failure, the errno is not propagated to userspace, so mkdir will fail silently. To trigger this bug, we mount blkio (or memory subsystem), and create more then 65534 cgroups. (The number of cgroups is limited to 65535 if a subsystem has use_id == 1) # mount -t cgroup -o blkio xxx /mnt # for ((i = 0; i < 65534; i++)); do mkdir /mnt/$i; done # mkdir /mnt/65534 (should return ENOSPC) # Signed-off-by: Li Zefan Acked-by: Serge Hallyn Acked-by: Paul Menage Acked-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 1fbcc748044a..aa3bee566446 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2936,14 +2936,17 @@ static long cgroup_create(struct cgroup *parent, struct dentry *dentry, for_each_subsys(root, ss) { struct cgroup_subsys_state *css = ss->create(ss, cgrp); + if (IS_ERR(css)) { err = PTR_ERR(css); goto err_destroy; } init_cgroup_css(css, ss, cgrp); - if (ss->use_id) - if (alloc_css_id(ss, parent, cgrp)) + if (ss->use_id) { + err = alloc_css_id(ss, parent, cgrp); + if (err) goto err_destroy; + } /* At error, ->destroy() callback has to free assigned ID. */ } From 1ec562035ba64e724652cb12b8a770b3906e9bf5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 2 Feb 2010 13:44:10 -0800 Subject: [PATCH 1565/1626] imxfb: correct location of callbacks in suspend and resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The probe function passes a pointer to a struct fb_info to platform_set_drvdata(), so don't interpret the return value of platform_get_drvdata() as a pointer to struct imxfb_info. The original imxfb_info *fbi backlight_power was NULL but in imxfb_suspend it was 4 resulting in an oops as imxfb_suspend calls imxfb_disable_controller(fbi) which in turn has if (fbi->backlight_power) fbi->backlight_power(0); Signed-off-by: Uwe Kleine-König Acked-by: Sascha Hauer Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/imxfb.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 66358fa825f3..b4b6deceed15 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -593,7 +593,8 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf */ static int imxfb_suspend(struct platform_device *dev, pm_message_t state) { - struct imxfb_info *fbi = platform_get_drvdata(dev); + struct fb_info *info = platform_get_drvdata(dev); + struct imxfb_info *fbi = info->par; pr_debug("%s\n", __func__); @@ -603,7 +604,8 @@ static int imxfb_suspend(struct platform_device *dev, pm_message_t state) static int imxfb_resume(struct platform_device *dev) { - struct imxfb_info *fbi = platform_get_drvdata(dev); + struct fb_info *info = platform_get_drvdata(dev); + struct imxfb_info *fbi = info->par; pr_debug("%s\n", __func__); From 03eac7bb882a75e6ee5705288f7ec36ad2e7d0d5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20R=C3=B6jfors?= Date: Tue, 2 Feb 2010 13:44:12 -0800 Subject: [PATCH 1566/1626] uartlite: fix crash when using as console MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Move the ulite_console_setup to the .devinit section since it might be called on probe, which is in devinit. Fixes the crash below where the uartlite hw is probed after the .init section is freed from the kernel. uartlite: ttyUL0 at MMIO 0xc8000100 (irq = 30) is a uartlite BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] ulite_console_setup+0x6f/0xa8 *pdpt = 0000000036fb0001 *pde = 0000000000000000 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1f.1/host0/uevent Modules linked in: puffin(+) serio_raw Pid: 151, comm: modprobe Not tainted (2.6.31.5-1.0.b1-b1 #1) POULSBO EIP: 0060:[] EFLAGS: 00010246 CPU: 0 EIP is at ulite_console_setup+0x6f/0xa8 EAX: c16ec824 EBX: c16ec824 ECX: c176719f EDX: 00000000 ESI: 00000000 EDI: c17b42c4 EBP: f6fd1cf0 ESP: f6fd1cd8 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process modprobe (pid: 151, ti=f6fd0000 task=f6fa1020 task.ti=f6fd0000) Stack: c1031f51 00000000 00000000 00000246 c182237c f7742000 f6fd1d5c c11fd316 <0> c16ec85c f77420d4 0000001e 00000000 00000000 c1633e78 4f494d4d 63783020 <0> 30303038 00303031 f6fd1d3c c10e0786 f6fd1d48 00000000 f6fd1d48 00000000 Call Trace: [] ? register_console+0xf6/0x1fc [] ? uart_add_one_port+0x237/0x2bb [] ? sysfs_add_one+0x13/0xd3 [] ? sysfs_do_create_link+0xba/0xfc [] ? ulite_probe+0x198/0x1eb [] ? platform_drv_probe+0xc/0xe [] ? driver_probe_device+0x79/0x105 [] ? __device_attach+0x28/0x30 [] ? bus_for_each_drv+0x3d/0x67 [] ? device_attach+0x44/0x58 [] ? __device_attach+0x0/0x30 [] ? bus_probe_device+0x1f/0x34 [] ? device_add+0x385/0x4c0 [] ? _write_unlock+0x8/0x1f [] ? platform_device_add+0xd9/0x11c [] ? mfd_add_devices+0x165/0x1bc [] ? puffin_probe+0x2d0/0x390 [puffin] [] ? pci_match_device+0xa0/0xa7 [] ? local_pci_probe+0xe/0x10 [] ? pci_device_probe+0x43/0x66 [] ? driver_probe_device+0x79/0x105 [] ? __driver_attach+0x43/0x5f [] ? bus_for_each_dev+0x3d/0x67 [] ? driver_attach+0x14/0x16 [] ? __driver_attach+0x0/0x5f [] ? bus_add_driver+0xf9/0x220 [] ? driver_register+0x8b/0xeb [] ? __pci_register_driver+0x43/0x9f [] ? __blocking_notifier_call_chain+0x40/0x4c [] ? puffin_init+0x0/0x48 [puffin] [] ? puffin_init+0x17/0x48 [puffin] [] ? do_one_initcall+0x4c/0x131 [] ? sys_init_module+0xa7/0x1b7 [] ? syscall_call+0x7/0xb Code: 6e 74 00 00 00 92 33 00 00 18 00 0e 01 73 79 6e 63 65 2d 72 65 67 69 73 74 72 79 0c 00 49 32 00 00 14 00 09 01 61 6c 73 61 2d 69 <6e> 66 6f 00 00 00 42 37 00 00 10 00 07 01 6b 69 6c 6c 61 6c 6c EIP: [] ulite_console_setup+0x6f/0xa8 SS:ESP 0068:f6fd1cd8 CR2: 0000000000000000 Signed-off-by: Richard Röjfors Acked-by: Peter Korsgaard Cc: Alan Cox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/uartlite.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index 377f2712289e..ab2ab3c81834 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -394,7 +394,7 @@ static void ulite_console_write(struct console *co, const char *s, spin_unlock_irqrestore(&port->lock, flags); } -static int __init ulite_console_setup(struct console *co, char *options) +static int __devinit ulite_console_setup(struct console *co, char *options) { struct uart_port *port; int baud = 9600; From 094e9539bd24bbe23b8e2741e903b0f3f1f85b03 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Tue, 2 Feb 2010 13:44:14 -0800 Subject: [PATCH 1567/1626] hugetlb: fix section mismatches hugetlb_sysfs_add_hstate is called by hugetlb_register_node directly during init and also indirectly via sysfs after init. This patch removes the __init tag from hugetlb_sysfs_add_hstate. Signed-off-by: Jeff Mahoney Cc: Lee Schermerhorn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index e91b81b63670..2d16fa6b8c2d 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1515,10 +1515,9 @@ static struct attribute_group hstate_attr_group = { .attrs = hstate_attrs, }; -static int __init hugetlb_sysfs_add_hstate(struct hstate *h, - struct kobject *parent, - struct kobject **hstate_kobjs, - struct attribute_group *hstate_attr_group) +static int hugetlb_sysfs_add_hstate(struct hstate *h, struct kobject *parent, + struct kobject **hstate_kobjs, + struct attribute_group *hstate_attr_group) { int retval; int hi = h - hstates; From a225a5cc2c25e1217e68ee2ab8dd4454573fa308 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 2 Feb 2010 13:44:15 -0800 Subject: [PATCH 1568/1626] fault injection: correct function names in documentation init_fault_attr_entries() should be init_fault_attr_dentries(). cleanup_fault_attr_entries() should be cleanup_fault_attr_dentries(). Signed-off-by: Anton Blanchard Acked-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/fault-injection/fault-injection.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt index 079305640790..7be15e44d481 100644 --- a/Documentation/fault-injection/fault-injection.txt +++ b/Documentation/fault-injection/fault-injection.txt @@ -143,8 +143,8 @@ o provide a way to configure fault attributes failslab, fail_page_alloc, and fail_make_request use this way. Helper functions: - init_fault_attr_entries(entries, attr, name); - void cleanup_fault_attr_entries(entries); + init_fault_attr_dentries(entries, attr, name); + void cleanup_fault_attr_dentries(entries); - module parameters From ea0854170c95245a258b386c7a9314399c949fe0 Mon Sep 17 00:00:00 2001 From: Shaohui Zheng Date: Tue, 2 Feb 2010 13:44:16 -0800 Subject: [PATCH 1569/1626] memory hotplug: fix a bug on /dev/mem for 64-bit kernels Newly added memory can not be accessed via /dev/mem, because we do not update the variables high_memory, max_pfn and max_low_pfn. Add a function update_end_of_memory_vars() to update these variables for 64-bit kernels. [akpm@linux-foundation.org: simplify comment] Signed-off-by: Shaohui Zheng Cc: Andi Kleen Cc: Li Haicheng Reviewed-by: Wu Fengguang Reviewed-by: KAMEZAWA Hiroyuki Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/mm/init_64.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 5198b9bb34ef..69ddfbd91135 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -49,6 +49,7 @@ #include #include #include +#include static unsigned long dma_reserve __initdata; @@ -615,6 +616,21 @@ void __init paging_init(void) * Memory hotplug specific functions */ #ifdef CONFIG_MEMORY_HOTPLUG +/* + * After memory hotplug the variables max_pfn, max_low_pfn and high_memory need + * updating. + */ +static void update_end_of_memory_vars(u64 start, u64 size) +{ + unsigned long end_pfn = PFN_UP(start + size); + + if (end_pfn > max_pfn) { + max_pfn = end_pfn; + max_low_pfn = end_pfn; + high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1; + } +} + /* * Memory is added always to NORMAL zone. This means you will never get * additional DMA/DMA32 memory. @@ -634,6 +650,9 @@ int arch_add_memory(int nid, u64 start, u64 size) ret = __add_pages(nid, zone, start_pfn, nr_pages); WARN_ON_ONCE(ret); + /* update max_pfn, max_low_pfn and high_memory */ + update_end_of_memory_vars(start, size); + return ret; } EXPORT_SYMBOL_GPL(arch_add_memory); From ca0bf64d99f6e3f6e2fe2585e52a0ac57354beac Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Tue, 2 Feb 2010 13:44:17 -0800 Subject: [PATCH 1570/1626] pktcdvd: removing device does not remove its sysfs dir This is the counterpart to cba767175becadc5c4016cceb7bfdd2c7fe722f4 ("pktcdvd: remove broken dev_t export of class devices"). Device is not registered using dev_t, so it should not be destroyed using device_destroy which looks up the device by dev_t. This will fail and adding the device again will fail with the "duplicate name" error. This is fixed using device_unregister instead of device_destroy. Signed-off-by: Thadeu Lima de Souza Cascardo Cc: Kay Sievers Cc: Peter Osterlund Cc: Al Viro Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/pktcdvd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 2ddf03ae034e..68b5957f107c 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -322,7 +322,7 @@ static void pkt_sysfs_dev_remove(struct pktcdvd_device *pd) pkt_kobj_remove(pd->kobj_stat); pkt_kobj_remove(pd->kobj_wqueue); if (class_pktcdvd) - device_destroy(class_pktcdvd, pd->pkt_dev); + device_unregister(pd->dev); } From 7823860ca2904d6325eb636b77768f3e8183c861 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 3 Feb 2010 10:18:20 +0100 Subject: [PATCH 1571/1626] microblaze: Defconfig update There were several changes in Microblaze defconfig that's why is good to update defconfigs. Signed-off-by: Michal Simek --- arch/microblaze/configs/mmu_defconfig | 112 ++++++++++++++++++------ arch/microblaze/configs/nommu_defconfig | 101 +++++++++++++++++---- 2 files changed, 169 insertions(+), 44 deletions(-) diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig index bb7c374713ad..6fced1fe3bf0 100644 --- a/arch/microblaze/configs/mmu_defconfig +++ b/arch/microblaze/configs/mmu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 10:28:50 2009 +# Linux kernel version: 2.6.33-rc6 +# Wed Feb 3 10:02:59 2010 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -19,8 +19,12 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_CSUM=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_PCI is not set CONFIG_NO_DMA=y +CONFIG_DTC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -44,6 +48,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -64,10 +69,12 @@ CONFIG_INITRAMFS_ROOT_GID=0 CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_INITRAMFS_COMPRESSION_NONE is not set CONFIG_INITRAMFS_COMPRESSION_GZIP=y # CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set # CONFIG_INITRAMFS_COMPRESSION_LZMA is not set +# CONFIG_INITRAMFS_COMPRESSION_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -90,21 +97,20 @@ CONFIG_EVENTFD=y CONFIG_AIO=y # -# Performance Counters +# Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 @@ -123,14 +129,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -139,11 +172,6 @@ CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PLATFORM_GENERIC=y CONFIG_OPT_LIB_FUNCTION=y CONFIG_OPT_LIB_ASM=y -CONFIG_ALLOW_EDIT_AUTO=y - -# -# Automatic platform settings from Kconfig.auto -# # # Definitions for MICROBLAZE0 @@ -203,12 +231,11 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # @@ -289,7 +316,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -313,6 +346,10 @@ CONFIG_OF_DEVICE=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -349,7 +386,6 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set -# CONFIG_ETHOC is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set @@ -359,12 +395,12 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_XILINX_EMACLITE=y CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -408,6 +444,7 @@ CONFIG_SERIAL_UARTLITE=y CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -433,7 +470,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -526,8 +562,6 @@ CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -638,11 +672,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -662,6 +698,9 @@ CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SLAB_LEAK is not set CONFIG_DEBUG_SPINLOCK=y # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -680,10 +719,29 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set -# CONFIG_KMEMCHECK is not set CONFIG_EARLY_PRINTK=y # CONFIG_HEART_BEAT is not set CONFIG_DEBUG_BOOTMEM=y @@ -694,7 +752,11 @@ CONFIG_DEBUG_BOOTMEM=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index adb839bab704..ce2da535246a 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 10:29:43 2009 +# Linux kernel version: 2.6.33-rc6 +# Wed Feb 3 10:03:21 2010 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -19,8 +19,12 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_CSUM=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_PCI is not set CONFIG_NO_DMA=y +CONFIG_DTC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -46,6 +50,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -81,16 +86,16 @@ CONFIG_EVENTFD=y CONFIG_AIO=y # -# Performance Counters +# Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y # # GCOV-based kernel profiling @@ -116,14 +121,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -132,7 +164,10 @@ CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PLATFORM_GENERIC=y # CONFIG_SELFMOD is not set # CONFIG_OPT_LIB_FUNCTION is not set -# CONFIG_ALLOW_EDIT_AUTO is not set + +# +# Definitions for MICROBLAZE0 +# CONFIG_KERNEL_BASE_ADDR=0x90000000 CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5" CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 @@ -190,7 +225,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # @@ -274,9 +308,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -301,9 +332,9 @@ CONFIG_STANDALONE=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -387,6 +418,10 @@ CONFIG_OF_DEVICE=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -423,7 +458,6 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set -# CONFIG_ETHOC is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set @@ -433,12 +467,12 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -482,6 +516,7 @@ CONFIG_SERIAL_UARTLITE=y CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -508,7 +543,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -616,7 +650,6 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -672,11 +705,13 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -695,12 +730,16 @@ CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_SELFTEST=y CONFIG_DEBUG_OBJECTS_FREE=y CONFIG_DEBUG_OBJECTS_TIMERS=y +# CONFIG_DEBUG_OBJECTS_WORK is not set CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -720,8 +759,28 @@ CONFIG_DEBUG_SG=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y @@ -734,7 +793,11 @@ CONFIG_EARLY_PRINTK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # From e402746a945ceb9d0486a8e3d5917c9228fa4404 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 25 Jan 2010 11:20:19 +0000 Subject: [PATCH 1572/1626] GFS2: Wait for unlock completion on umount This patch adds a wait on umount between the point at which we dispose of all glocks and the point at which we unmount the lock protocol. This ensures that we've received all the replies to our unlock requests before we stop the locking. Signed-off-by: Steven Whitehouse Reported-by: Fabio M. Di Nitto --- fs/gfs2/incore.h | 2 ++ fs/gfs2/lock_dlm.c | 7 ++++++- fs/gfs2/ops_fstype.c | 2 ++ fs/gfs2/super.c | 3 +++ 4 files changed, 13 insertions(+), 1 deletion(-) diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h index 4792200978c8..bc0ad158e6b4 100644 --- a/fs/gfs2/incore.h +++ b/fs/gfs2/incore.h @@ -544,6 +544,8 @@ struct gfs2_sbd { struct gfs2_holder sd_live_gh; struct gfs2_glock *sd_rename_gl; struct gfs2_glock *sd_trans_gl; + wait_queue_head_t sd_glock_wait; + atomic_t sd_glock_disposal; /* Inode Stuff */ diff --git a/fs/gfs2/lock_dlm.c b/fs/gfs2/lock_dlm.c index 46df988323bc..cdd0755d7823 100644 --- a/fs/gfs2/lock_dlm.c +++ b/fs/gfs2/lock_dlm.c @@ -21,6 +21,7 @@ static void gdlm_ast(void *arg) { struct gfs2_glock *gl = arg; unsigned ret = gl->gl_state; + struct gfs2_sbd *sdp = gl->gl_sbd; BUG_ON(gl->gl_lksb.sb_flags & DLM_SBF_DEMOTED); @@ -30,6 +31,8 @@ static void gdlm_ast(void *arg) switch (gl->gl_lksb.sb_status) { case -DLM_EUNLOCK: /* Unlocked, so glock can be freed */ kmem_cache_free(gfs2_glock_cachep, gl); + if (atomic_dec_and_test(&sdp->sd_glock_disposal)) + wake_up(&sdp->sd_glock_wait); return; case -DLM_ECANCEL: /* Cancel while getting lock */ ret |= LM_OUT_CANCELED; @@ -167,7 +170,8 @@ static unsigned int gdlm_lock(struct gfs2_glock *gl, static void gdlm_put_lock(struct kmem_cache *cachep, void *ptr) { struct gfs2_glock *gl = ptr; - struct lm_lockstruct *ls = &gl->gl_sbd->sd_lockstruct; + struct gfs2_sbd *sdp = gl->gl_sbd; + struct lm_lockstruct *ls = &sdp->sd_lockstruct; int error; if (gl->gl_lksb.sb_lkid == 0) { @@ -183,6 +187,7 @@ static void gdlm_put_lock(struct kmem_cache *cachep, void *ptr) (unsigned long long)gl->gl_name.ln_number, error); return; } + atomic_inc(&sdp->sd_glock_disposal); } static void gdlm_cancel(struct gfs2_glock *gl) diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index edfee24f3636..9390fc7d8d40 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -82,6 +82,8 @@ static struct gfs2_sbd *init_sbd(struct super_block *sb) gfs2_tune_init(&sdp->sd_tune); + init_waitqueue_head(&sdp->sd_glock_wait); + atomic_set(&sdp->sd_glock_disposal, 0); spin_lock_init(&sdp->sd_statfs_spin); spin_lock_init(&sdp->sd_rindex_spin); diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c index c282ad41f3d1..66242b32db5b 100644 --- a/fs/gfs2/super.c +++ b/fs/gfs2/super.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "gfs2.h" #include "incore.h" @@ -860,6 +861,8 @@ restart: gfs2_jindex_free(sdp); /* Take apart glock structures and buffer lists */ gfs2_gl_hash_clear(sdp); + /* Wait for dlm to reply to all our unlock requests */ + wait_event(sdp->sd_glock_wait, atomic_read(&sdp->sd_glock_disposal) == 0); /* Unmount the locking protocol */ gfs2_lm_unmount(sdp); From 8f05228ee7c8f409ae3c6f9c3e13d7ccb9c18360 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Fri, 29 Jan 2010 15:21:27 +0000 Subject: [PATCH 1573/1626] GFS2: Extend umount wait coverage to full glock lifetime Although all glocks are, by the time of the umount glock wait, scheduled for demotion, some of them haven't made it far enough through the process for the original set of waiting code to wait for them. This extends the ref count to the whole glock lifetime in order to ensure that the waiting does catch all glocks. It does make it a bit more invasive, but it seems the only sensible solution at the moment. Signed-off-by: Steven Whitehouse --- fs/gfs2/glock.c | 4 ++++ fs/gfs2/glock.h | 2 +- fs/gfs2/lock_dlm.c | 6 +++--- fs/gfs2/ops_fstype.c | 10 +++++++++- fs/gfs2/super.c | 2 -- 5 files changed, 17 insertions(+), 7 deletions(-) diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index f455a03a09e2..f42663325931 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -769,6 +769,7 @@ int gfs2_glock_get(struct gfs2_sbd *sdp, u64 number, if (!gl) return -ENOMEM; + atomic_inc(&sdp->sd_glock_disposal); gl->gl_flags = 0; gl->gl_name = name; atomic_set(&gl->gl_ref, 1); @@ -1538,6 +1539,9 @@ void gfs2_gl_hash_clear(struct gfs2_sbd *sdp) up_write(&gfs2_umount_flush_sem); msleep(10); } + flush_workqueue(glock_workqueue); + wait_event(sdp->sd_glock_wait, atomic_read(&sdp->sd_glock_disposal) == 0); + gfs2_dump_lockstate(sdp); } void gfs2_glock_finish_truncate(struct gfs2_inode *ip) diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h index 13f0bd228132..c0262faf4725 100644 --- a/fs/gfs2/glock.h +++ b/fs/gfs2/glock.h @@ -123,7 +123,7 @@ struct lm_lockops { int (*lm_mount) (struct gfs2_sbd *sdp, const char *fsname); void (*lm_unmount) (struct gfs2_sbd *sdp); void (*lm_withdraw) (struct gfs2_sbd *sdp); - void (*lm_put_lock) (struct kmem_cache *cachep, void *gl); + void (*lm_put_lock) (struct kmem_cache *cachep, struct gfs2_glock *gl); unsigned int (*lm_lock) (struct gfs2_glock *gl, unsigned int req_state, unsigned int flags); void (*lm_cancel) (struct gfs2_glock *gl); diff --git a/fs/gfs2/lock_dlm.c b/fs/gfs2/lock_dlm.c index cdd0755d7823..0e5e0e7022e5 100644 --- a/fs/gfs2/lock_dlm.c +++ b/fs/gfs2/lock_dlm.c @@ -167,15 +167,16 @@ static unsigned int gdlm_lock(struct gfs2_glock *gl, return LM_OUT_ASYNC; } -static void gdlm_put_lock(struct kmem_cache *cachep, void *ptr) +static void gdlm_put_lock(struct kmem_cache *cachep, struct gfs2_glock *gl) { - struct gfs2_glock *gl = ptr; struct gfs2_sbd *sdp = gl->gl_sbd; struct lm_lockstruct *ls = &sdp->sd_lockstruct; int error; if (gl->gl_lksb.sb_lkid == 0) { kmem_cache_free(cachep, gl); + if (atomic_dec_and_test(&sdp->sd_glock_disposal)) + wake_up(&sdp->sd_glock_wait); return; } @@ -187,7 +188,6 @@ static void gdlm_put_lock(struct kmem_cache *cachep, void *ptr) (unsigned long long)gl->gl_name.ln_number, error); return; } - atomic_inc(&sdp->sd_glock_disposal); } static void gdlm_cancel(struct gfs2_glock *gl) diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index 9390fc7d8d40..8a102f731003 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -985,9 +985,17 @@ static const match_table_t nolock_tokens = { { Opt_err, NULL }, }; +static void nolock_put_lock(struct kmem_cache *cachep, struct gfs2_glock *gl) +{ + struct gfs2_sbd *sdp = gl->gl_sbd; + kmem_cache_free(cachep, gl); + if (atomic_dec_and_test(&sdp->sd_glock_disposal)) + wake_up(&sdp->sd_glock_wait); +} + static const struct lm_lockops nolock_ops = { .lm_proto_name = "lock_nolock", - .lm_put_lock = kmem_cache_free, + .lm_put_lock = nolock_put_lock, .lm_tokens = &nolock_tokens, }; diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c index 66242b32db5b..b9dd3da22c0a 100644 --- a/fs/gfs2/super.c +++ b/fs/gfs2/super.c @@ -861,8 +861,6 @@ restart: gfs2_jindex_free(sdp); /* Take apart glock structures and buffer lists */ gfs2_gl_hash_clear(sdp); - /* Wait for dlm to reply to all our unlock requests */ - wait_event(sdp->sd_glock_wait, atomic_read(&sdp->sd_glock_disposal) == 0); /* Unmount the locking protocol */ gfs2_lm_unmount(sdp); From 58424a49cb99c4ad9386b47f885b352476313a02 Mon Sep 17 00:00:00 2001 From: "Steven J. Magnani" Date: Mon, 1 Feb 2010 06:34:45 -0600 Subject: [PATCH 1574/1626] microblaze: fix interrupt state restore Interrupts must be disabled while an interrupt state restore (prep for interrupt return) is in progress. Code to do this was lost in the port to the mainline kernel. Signed-off-by: Steven J. Magnani Signed-off-by: Michal Simek --- arch/microblaze/kernel/entry-nommu.S | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S index 95b0855802df..391d6197fc3b 100644 --- a/arch/microblaze/kernel/entry-nommu.S +++ b/arch/microblaze/kernel/entry-nommu.S @@ -122,7 +122,7 @@ ENTRY(_interrupt) ret_from_intr: lwi r11, r1, PT_MODE - bneid r11, 3f + bneid r11, no_intr_resched lwi r6, r31, TS_THREAD_INFO /* get thread info */ lwi r19, r6, TI_FLAGS /* get flags in thread info */ @@ -133,16 +133,18 @@ ret_from_intr: bralid r15, schedule nop 1: andi r11, r19, _TIF_SIGPENDING - beqid r11, no_intr_reshed + beqid r11, no_intr_resched addk r5, r1, r0 addk r7, r0, r0 bralid r15, do_signal addk r6, r0, r0 -no_intr_reshed: +no_intr_resched: + /* Disable interrupts, we are now committed to the state restore */ + disable_irq + /* save mode indicator */ lwi r11, r1, PT_MODE -3: swi r11, r0, PER_CPU(KM) /* save r31 */ From 9f557cd8073104b39528794d44e129331ded649f Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 3 Feb 2010 08:27:22 -0500 Subject: [PATCH 1575/1626] NFS: Fix an Oops when truncating a file The VM/VFS does not allow mapping->a_ops->invalidatepage() to fail. Unfortunately, nfs_wb_page_cancel() may fail if a fatal signal occurs. Since the NFS code assumes that the page stays mapped for as long as the writeback is active, we can end up Oopsing (among other things). The only safe fix here is to convert nfs_wait_on_request(), so as to make it uninterruptible (as is already the case with wait_on_page_writeback()). Signed-off-by: Trond Myklebust Cc: stable@kernel.org --- fs/nfs/pagelist.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c index e2975939126a..a12c45b65dd4 100644 --- a/fs/nfs/pagelist.c +++ b/fs/nfs/pagelist.c @@ -176,6 +176,12 @@ void nfs_release_request(struct nfs_page *req) kref_put(&req->wb_kref, nfs_free_request); } +static int nfs_wait_bit_uninterruptible(void *word) +{ + io_schedule(); + return 0; +} + /** * nfs_wait_on_request - Wait for a request to complete. * @req: request to wait upon. @@ -186,14 +192,9 @@ void nfs_release_request(struct nfs_page *req) int nfs_wait_on_request(struct nfs_page *req) { - int ret = 0; - - if (!test_bit(PG_BUSY, &req->wb_flags)) - goto out; - ret = out_of_line_wait_on_bit(&req->wb_flags, PG_BUSY, - nfs_wait_bit_killable, TASK_KILLABLE); -out: - return ret; + return wait_on_bit(&req->wb_flags, PG_BUSY, + nfs_wait_bit_uninterruptible, + TASK_UNINTERRUPTIBLE); } /** From 387c149b54b4321cbc790dadbd4f8eedb5a90468 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 3 Feb 2010 08:27:35 -0500 Subject: [PATCH 1576/1626] NFS: Fix a umount race Ensure that we unregister the bdi before kill_anon_super() calls ida_remove() on our device name. Signed-off-by: Trond Myklebust Cc: stable@kernel.org --- fs/nfs/super.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index ce907efc5508..f1afee4eea77 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -243,6 +243,7 @@ static int nfs_show_stats(struct seq_file *, struct vfsmount *); static int nfs_get_sb(struct file_system_type *, int, const char *, void *, struct vfsmount *); static int nfs_xdev_get_sb(struct file_system_type *fs_type, int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt); +static void nfs_put_super(struct super_block *); static void nfs_kill_super(struct super_block *); static int nfs_remount(struct super_block *sb, int *flags, char *raw_data); @@ -266,6 +267,7 @@ static const struct super_operations nfs_sops = { .alloc_inode = nfs_alloc_inode, .destroy_inode = nfs_destroy_inode, .write_inode = nfs_write_inode, + .put_super = nfs_put_super, .statfs = nfs_statfs, .clear_inode = nfs_clear_inode, .umount_begin = nfs_umount_begin, @@ -335,6 +337,7 @@ static const struct super_operations nfs4_sops = { .alloc_inode = nfs_alloc_inode, .destroy_inode = nfs_destroy_inode, .write_inode = nfs_write_inode, + .put_super = nfs_put_super, .statfs = nfs_statfs, .clear_inode = nfs4_clear_inode, .umount_begin = nfs_umount_begin, @@ -2257,6 +2260,17 @@ error_splat_super: goto out; } +/* + * Ensure that we unregister the bdi before kill_anon_super + * releases the device name + */ +static void nfs_put_super(struct super_block *s) +{ + struct nfs_server *server = NFS_SB(s); + + bdi_unregister(&server->backing_dev_info); +} + /* * Destroy an NFS2/3 superblock */ @@ -2265,7 +2279,6 @@ static void nfs_kill_super(struct super_block *s) struct nfs_server *server = NFS_SB(s); kill_anon_super(s); - bdi_unregister(&server->backing_dev_info); nfs_fscache_release_super_cookie(s); nfs_free_server(server); } From 9b4b351346b41d923d69adec865814fdaac4dba9 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 3 Feb 2010 08:27:35 -0500 Subject: [PATCH 1577/1626] NFS: Don't clobber the attribute type in nfs_update_inode() If the NFS_ATTR_FATTR_TYPE field isn't set in fattr->valid, then we should not set the S_IFMT part of inode->i_mode. Reported-by: Al Viro Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index faa091865ad0..f141bde7756a 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -1261,8 +1261,10 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) if (fattr->valid & NFS_ATTR_FATTR_MODE) { if ((inode->i_mode & S_IALLUGO) != (fattr->mode & S_IALLUGO)) { + umode_t newmode = inode->i_mode & S_IFMT; + newmode |= fattr->mode & S_IALLUGO; + inode->i_mode = newmode; invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL; - inode->i_mode = fattr->mode; } } else if (server->caps & NFS_CAP_MODE) invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR From 5ecb01cfdf96c5f465192bdb2a4fd4a61a24c6cc Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Sat, 23 Jan 2010 22:36:29 +0100 Subject: [PATCH 1578/1626] futex_lock_pi() key refcnt fix This fixes a futex key reference count bug in futex_lock_pi(), where a key's reference count is incremented twice but decremented only once, causing the backing object to not be released. If the futex is created in a temporary file in an ext3 file system, this bug causes the file's inode to become an "undead" orphan, which causes an oops from a BUG_ON() in ext3_put_super() when the file system is unmounted. glibc's test suite is known to trigger this, see . The bug is a regression from 2.6.28-git3, namely Peter Zijlstra's 38d47c1b7075bd7ec3881141bb3629da58f88dab "[PATCH] futex: rely on get_user_pages() for shared futexes". That commit made get_futex_key() also increment the reference count of the futex key, and updated its callers to decrement the key's reference count before returning. Unfortunately the normal exit path in futex_lock_pi() wasn't corrected: the reference count is incremented by get_futex_key() and queue_lock(), but the normal exit path only decrements once, via unqueue_me_pi(). The fix is to put_futex_key() after unqueue_me_pi(), since 2.6.31 this is easily done by 'goto out_put_key' rather than 'goto out'. Signed-off-by: Mikael Pettersson Acked-by: Peter Zijlstra Acked-by: Darren Hart Signed-off-by: Thomas Gleixner Cc: --- kernel/futex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/futex.c b/kernel/futex.c index d9b3a2228f9d..17828033a639 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -1971,7 +1971,7 @@ retry_private: /* Unqueue and drop the lock */ unqueue_me_pi(&q); - goto out; + goto out_put_key; out_unlock_put_key: queue_unlock(&q, hb); From 51246bfd189064079c54421507236fd2723b18f3 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 2 Feb 2010 11:40:27 +0100 Subject: [PATCH 1579/1626] futex: Handle user space corruption gracefully If the owner of a PI futex dies we fix up the pi_state and set pi_state->owner to NULL. When a malicious or just sloppy programmed user space application sets the futex value to 0 e.g. by calling pthread_mutex_init(), then the futex can be acquired again. A new waiter manages to enqueue itself on the pi_state w/o damage, but on unlock the kernel dereferences pi_state->owner and oopses. Prevent this by checking pi_state->owner in the unlock path. If pi_state->owner is not current we know that user space manipulated the futex value. Ignore the mess and return -EINVAL. This catches the above case and also the case where a task hijacks the futex by setting the tid value and then tries to unlock it. Reported-by: Jermome Marchand Signed-off-by: Thomas Gleixner Acked-by: Darren Hart Acked-by: Peter Zijlstra Cc: --- kernel/futex.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/kernel/futex.c b/kernel/futex.c index 17828033a639..06e8240d2abe 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -758,6 +758,13 @@ static int wake_futex_pi(u32 __user *uaddr, u32 uval, struct futex_q *this) if (!pi_state) return -EINVAL; + /* + * If current does not own the pi_state then the futex is + * inconsistent and user space fiddled with the futex value. + */ + if (pi_state->owner != current) + return -EINVAL; + raw_spin_lock(&pi_state->pi_mutex.wait_lock); new_owner = rt_mutex_next_owner(&pi_state->pi_mutex); From 59647b6ac3050dd964bc556fe6ef22f4db5b935c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 3 Feb 2010 09:33:05 +0100 Subject: [PATCH 1580/1626] futex: Handle futex value corruption gracefully The WARN_ON in lookup_pi_state which complains about a mismatch between pi_state->owner->pid and the pid which we retrieved from the user space futex is completely bogus. The code just emits the warning and then continues despite the fact that it detected an inconsistent state of the futex. A conveniant way for user space to spam the syslog. Replace the WARN_ON by a consistency check. If the values do not match return -EINVAL and let user space deal with the mess it created. This also fixes the missing task_pid_vnr() when we compare the pi_state->owner pid with the futex value. Reported-by: Jermome Marchand Signed-off-by: Thomas Gleixner Acked-by: Darren Hart Acked-by: Peter Zijlstra Cc: --- kernel/futex.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/kernel/futex.c b/kernel/futex.c index 06e8240d2abe..e7a35f1039e7 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -530,8 +530,25 @@ lookup_pi_state(u32 uval, struct futex_hash_bucket *hb, return -EINVAL; WARN_ON(!atomic_read(&pi_state->refcount)); - WARN_ON(pid && pi_state->owner && - pi_state->owner->pid != pid); + + /* + * When pi_state->owner is NULL then the owner died + * and another waiter is on the fly. pi_state->owner + * is fixed up by the task which acquires + * pi_state->rt_mutex. + * + * We do not check for pid == 0 which can happen when + * the owner died and robust_list_exit() cleared the + * TID. + */ + if (pid && pi_state->owner) { + /* + * Bail out if user space manipulated the + * futex value. + */ + if (pid != task_pid_vnr(pi_state->owner)) + return -EINVAL; + } atomic_inc(&pi_state->refcount); *ps = pi_state; From 4aba098c8d64329f0c4b24d12e1dc5398dd41a75 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 3 Feb 2010 15:48:03 +0000 Subject: [PATCH 1581/1626] ARM: Fix wrong register in proc-arm6_7.S data abort handler Signed-off-by: Russell King --- arch/arm/mm/proc-arm6_7.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 3f9cd3d8f6d5..795dc615f43b 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -41,7 +41,7 @@ ENTRY(cpu_arm7_dcache_clean_area) ENTRY(cpu_arm7_data_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - ldr r8, [r0] @ read arm instruction + ldr r8, [r2] @ read arm instruction tst r8, #1 << 20 @ L = 0 -> write? orreq r1, r1, #1 << 11 @ yes. and r7, r8, #15 << 24 From faccbcfb63af006e100d5b3b513131fe27aa66ab Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 29 Jan 2010 14:20:05 -0800 Subject: [PATCH 1582/1626] omap: Remove old unused defines for OMAP_32KSYNCT_BASE Remove old unused defines for OMAP_32KSYNCT_BASE Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/omap_device.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 1e5648d3e3d8..2ed72013c2e2 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -89,16 +89,6 @@ #define USE_WAKEUP_LAT 0 #define IGNORE_WAKEUP_LAT 1 -/* XXX this should be moved into a separate file */ -#if defined(CONFIG_ARCH_OMAP2420) -# define OMAP_32KSYNCT_BASE 0x48004000 -#elif defined(CONFIG_ARCH_OMAP2430) -# define OMAP_32KSYNCT_BASE 0x49020000 -#elif defined(CONFIG_ARCH_OMAP3430) -# define OMAP_32KSYNCT_BASE 0x48320000 -#else -# error Unknown OMAP device -#endif /* Private functions */ From 9af915da20bd405c232ebb93c3cb80c6d92a12f6 Mon Sep 17 00:00:00 2001 From: Sriram Date: Fri, 29 Jan 2010 14:20:05 -0800 Subject: [PATCH 1583/1626] ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAP OMAP platforms(like OMAP3530) include DSP or other co-processors for media acceleration. when carving out memory for the accelerators we can end up creating a hole in the memory map of sort: To handle such a memory configuration ARCH_HAS_HOLES_MEMORYMODEL has to be enabled. For further information refer discussion at: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15262.html. Signed-off-by: Sriramakrishnan Signed-off-by: Tony Lindgren --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4c33ca82f9b1..184a6bd54825 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -702,6 +702,7 @@ config ARCH_OMAP select ARCH_HAS_CPUFREQ select GENERIC_TIME select GENERIC_CLOCKEVENTS + select ARCH_HAS_HOLES_MEMORYMODEL help Support for TI's OMAP platform (OMAP1 and OMAP2). From 74005a2b116203f618fe784d88ad7e6071bb1554 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 29 Jan 2010 14:20:06 -0800 Subject: [PATCH 1584/1626] OMAP2/3: IRQ: ensure valid base address Ensure valid base address during IRQ init. Fixes compiler warning about potential use of uninitialized variable. Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/irq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 27054025da2b..26aeef560aa3 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -194,7 +194,7 @@ void __init omap_init_irq(void) int i; for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { - unsigned long base; + unsigned long base = 0; struct omap_irq_bank *bank = irq_banks + i; if (cpu_is_omap24xx()) @@ -202,6 +202,8 @@ void __init omap_init_irq(void) else if (cpu_is_omap34xx()) base = OMAP34XX_IC_BASE; + BUG_ON(!base); + /* Static mapping, never released */ bank->base_reg = ioremap(base, SZ_4K); if (!bank->base_reg) { From 8d08436d782d177747a0fac1e1455a44b932b7c6 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 29 Jan 2010 14:20:06 -0800 Subject: [PATCH 1585/1626] OMAP2/3: GPMC: ensure valid clock pointer Ensure valid clock pointer during GPMC init. Fixes compiler warning about potential use of uninitialized variable. Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 3f1334f62e7a..7027cdc1ba49 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -505,7 +505,7 @@ static void __init gpmc_mem_init(void) void __init gpmc_init(void) { u32 l; - char *ck; + char *ck = NULL; if (cpu_is_omap24xx()) { ck = "core_l3_ck"; @@ -521,6 +521,9 @@ void __init gpmc_init(void) l = OMAP44XX_GPMC_BASE; } + if (WARN_ON(!ck)) + return; + gpmc_l3_clk = clk_get(NULL, ck); if (IS_ERR(gpmc_l3_clk)) { printk(KERN_ERR "Could not get GPMC clock %s\n", ck); From 9ecef433204f9b06550dd45cf84f14706f8fe4f0 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 1 Feb 2010 11:22:54 -0800 Subject: [PATCH 1586/1626] omap: Fix 3630 mux errors 3630 has more mux signals than 34xx. The additional pins exist in omap36xx_cbp_subset, but are not initialized as the superset is missing these offsets. This causes the following errors during the boot: mux: Unknown entry offset 0x236 mux: Unknown entry offset 0x22e mux: Unknown entry offset 0x1ec mux: Unknown entry offset 0x1ee mux: Unknown entry offset 0x1f4 mux: Unknown entry offset 0x1f6 mux: Unknown entry offset 0x1f8 mux: Unknown entry offset 0x1fa mux: Unknown entry offset 0x1fc mux: Unknown entry offset 0x22a mux: Unknown entry offset 0x226 mux: Unknown entry offset 0x230 mux: Unknown entry offset 0x22c mux: Unknown entry offset 0x228 Fix this by adding the missing offsets to omap3 superset. Note that additionally the uninitialized pins need to be skipped on 34xx. Based on an earlier patch by Allen Pais . Reported-by: Allen Pais Signed-off-by: Allen Pais Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.c | 7 ++++++ arch/arm/mach-omap2/mux34xx.c | 47 +++++++++++++++++++++++++++++++++++ 2 files changed, 54 insertions(+) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 3f59bd12cbbf..19001dd8dd7e 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -968,6 +968,13 @@ static void __init omap_mux_init_list(struct omap_mux *superset) } #endif +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) + if (!superset->muxnames || !superset->muxnames[0]) { + superset++; + continue; + } +#endif + entry = omap_mux_list_add(superset); if (!entry) { printk(KERN_ERR "mux: Could not add entry\n"); diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 68e0a595f9a1..07aa7b3c95f7 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -649,6 +649,53 @@ static struct omap_mux __initdata omap3_muxmodes[] = { _OMAP3_MUXENTRY(UART3_TX_IRTX, 166, "uart3_tx_irtx", NULL, NULL, NULL, "gpio_166", NULL, NULL, "safe_mode"), + + /* Only on 3630, see omap36xx_cbp_subset for the signals */ + _OMAP3_MUXENTRY(GPMC_A11, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MREAD, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MWRITE, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SREAD, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SWRITE, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(GPMC_A11, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD28, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD29, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD32, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD33, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD34, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD35, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD36, 0, + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL), { .reg_offset = OMAP_MUX_TERMINATOR }, }; From 78737ae1b0f0b425e8eb72a9c84125fa8cac8e8e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 1 Feb 2010 13:03:42 -0800 Subject: [PATCH 1587/1626] omap: Fix arch/arm/mach-omap2/mux.c: Off by one error David Binderman ran the sourceforge tool cppcheck over the source code of the new Linux kernel 2.6.33-rc6: [./arm/mach-omap2/mux.c:492]: (error) Buffer access out-of-bounds 13 characters + 1 digit + 1 zero byte is more than 14 characters. Also add a comment on mode0 name length in case new omaps start using longer names. Reported-by: David Binderman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 19001dd8dd7e..5fedc50c58e4 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -486,7 +486,7 @@ int __init omap_mux_init_signal(char *muxname, int val) static inline void omap_mux_decode(struct seq_file *s, u16 val) { char *flags[OMAP_MUX_MAX_NR_FLAGS]; - char mode[14]; + char mode[sizeof("OMAP_MUX_MODE") + 1]; int i = -1; sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7); @@ -553,6 +553,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused) if (!m0_name) continue; + /* REVISIT: Needs to be updated if mode0 names get longer */ for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) { if (m0_name[i] == '\0') { m0_def[i] = m0_name[i]; From 0825cc8a6ffa54c87ad7ad914a16d6c035627935 Mon Sep 17 00:00:00 2001 From: Marek Skuczynski Date: Sun, 31 Jan 2010 10:00:54 +0000 Subject: [PATCH 1588/1626] omap: Fix access to already released memory in clk_debugfs_register_one() I have found an access to already released memory in clk_debugfs_register_one() function. Signed-off-by: Marek Skuczynski Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/clock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index d9f8c844c385..4becbdd1935c 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -391,7 +391,7 @@ static struct dentry *clk_debugfs_root; static int clk_debugfs_register_one(struct clk *c) { int err; - struct dentry *d, *child; + struct dentry *d, *child, *child_tmp; struct clk *pa = c->parent; char s[255]; char *p = s; @@ -423,7 +423,7 @@ static int clk_debugfs_register_one(struct clk *c) err_out: d = c->dent; - list_for_each_entry(child, &d->d_subdirs, d_u.d_child) + list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child) debugfs_remove(child); debugfs_remove(c->dent); return err; From 301fe8eeee02c570c5bd30537aff9456f7f7955c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 1 Feb 2010 12:34:31 -0800 Subject: [PATCH 1589/1626] omap: Disable serial port autoidle by default Currently the omap serial clocks are autoidled after 5 seconds. However, this causes lost characters on the serial ports. As this is considered non-standard behaviour for Linux, disable the timeout. Note that this will also cause blocking of any deeper omap sleep states. To enable the autoidling of the serial ports, do something like this for each serial port: # echo 5 > /sys/devices/platform/serial8250.0/sleep_timeout # echo 5 > /sys/devices/platform/serial8250.1/sleep_timeout ... Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/serial.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 8c964bec8159..e10a02df6e1d 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -36,7 +36,13 @@ #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52 #define UART_OMAP_WER 0x17 /* Wake-up enable register */ -#define DEFAULT_TIMEOUT (5 * HZ) +/* + * NOTE: By default the serial timeout is disabled as it causes lost characters + * over the serial ports. This means that the UART clocks will stay on until + * disabled via sysfs. This also causes that any deeper omap sleep states are + * blocked. + */ +#define DEFAULT_TIMEOUT 0 struct omap_uart_state { int num; @@ -422,7 +428,8 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) uart->timeout = DEFAULT_TIMEOUT; setup_timer(&uart->timer, omap_uart_idle_timer, (unsigned long) uart); - mod_timer(&uart->timer, jiffies + uart->timeout); + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); omap_uart_smart_idle_enable(uart, 0); if (cpu_is_omap34xx()) { From bc496ed00ab1411d3efaf295b72e0c9eb343e1a3 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Mon, 1 Feb 2010 13:11:38 -0500 Subject: [PATCH 1590/1626] libata-scsi passthru: fix bug which truncated LBA48 return values Fix assignment which overwrote SAT ATA PASS-THROUGH command EXTEND bit setting (ATA_TFLAG_LBA48) Signed-off-by: Douglas Gilbert Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index f4ea5a8c325b..d096fbcbc771 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2875,7 +2875,7 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) * write indication (used for PIO/DMA setup), result TF is * copied back and we don't whine too much about its failure. */ - tf->flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; if (scmd->sc_data_direction == DMA_TO_DEVICE) tf->flags |= ATA_TFLAG_WRITE; From f7acede65d6b65919aee5b6a360a17cedb11f2f7 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 28 Jan 2010 13:30:11 +0100 Subject: [PATCH 1591/1626] libata: fix ata_id_logical_per_physical_sectors The value we get from the low byte of the ATA_ID_SECTOR_SIZE word is not not a plain multiple, but the log of it, so fix the helper to give the correct answer. Without this we'll get an incorrect minimal I/O size in the block limits VPD page for 4k sector drives. Also change the return value of ata_id_logical_per_physical_sectors to u16 for the unlikely case of very large logical sectors. Signed-off-by: Christoph Hellwig Signed-off-by: Jeff Garzik --- include/linux/ata.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/ata.h b/include/linux/ata.h index 38a6948ce0c2..20f31567ccee 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -647,9 +647,9 @@ static inline int ata_id_has_large_logical_sectors(const u16 *id) return id[ATA_ID_SECTOR_SIZE] & (1 << 13); } -static inline u8 ata_id_logical_per_physical_sectors(const u16 *id) +static inline u16 ata_id_logical_per_physical_sectors(const u16 *id) { - return id[ATA_ID_SECTOR_SIZE] & 0xf; + return 1 << (id[ATA_ID_SECTOR_SIZE] & 0xf); } static inline int ata_id_has_lba48(const u16 *id) From cedc9bf906dae044443d403371c887affdb44168 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 28 Jan 2010 16:04:15 +0900 Subject: [PATCH 1592/1626] ahci: add Acer G725 to broken suspend list MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Acer G725 shares the same suspend problem with the HP laptops which lose ATA devices on resume. New firmware which fixes the problem is already available. Add G725 with old firmwares to the broken suspend list. This problem has been reported in bko#15104. http://bugzilla.kernel.org/show_bug.cgi?id=15104 Signed-off-by: Tejun Heo Reported-by: Jani-Matti Hätinen Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index b8bea100a160..b34390347c16 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -2868,6 +2868,21 @@ static bool ahci_broken_suspend(struct pci_dev *pdev) }, .driver_data = "F.23", /* cutoff BIOS version */ }, + /* + * Acer eMachines G725 has the same problem. BIOS + * V1.03 is known to be broken. V3.04 is known to + * work. Inbetween, there are V1.06, V2.06 and V3.03 + * that we don't have much idea about. For now, + * blacklist anything older than V3.04. + */ + { + .ident = "G725", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "eMachines"), + DMI_MATCH(DMI_PRODUCT_NAME, "eMachines G725"), + }, + .driver_data = "V3.04", /* cutoff BIOS version */ + }, { } /* terminate list */ }; const struct dmi_system_id *dmi = dmi_first_match(sysids); From 2d68b7fe55d9e19a8a868224ed0dfd6526568521 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 4 Feb 2010 01:04:50 -0500 Subject: [PATCH 1593/1626] [libata] Call flush_dcache_page after PIO data transfers in libata-sff.c flush_dcache_page() must be called after (!ATA_TFLAG_WRITE) the data copying to avoid D-cache aliasing with user space or I-D cache coherency issues (when reading data from an ATA device using PIO, the kernel dirties the D-cache but there is no flush_dcache_page() required on Harvard architectures). Signed-off-by: Catalin Marinas Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 741065c9da67..730ef3c384ca 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -893,6 +893,9 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) do_write); } + if (!do_write) + flush_dcache_page(page); + qc->curbytes += qc->sect_size; qc->cursg_ofs += qc->sect_size; From f044ba7835b84e69c68b620ca8fa27e5ef67759d Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 4 Feb 2010 08:46:56 +0000 Subject: [PATCH 1594/1626] Btrfs: fix race between allocate and release extent buffer. Increase extent buffer's reference count while holding the lock. Otherwise it can race with try_release_extent_buffer. Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 96577e8bf9fd..b177ed319612 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -3165,10 +3165,9 @@ struct extent_buffer *alloc_extent_buffer(struct extent_io_tree *tree, spin_unlock(&tree->buffer_lock); goto free_eb; } - spin_unlock(&tree->buffer_lock); - /* add one reference for the tree */ atomic_inc(&eb->refs); + spin_unlock(&tree->buffer_lock); return eb; free_eb: From 014e4ac4f7d9c981750491fa40ea35efadc9ed49 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 29 Jan 2010 10:42:11 +0000 Subject: [PATCH 1595/1626] Btrfs: make error return negative in btrfs_sync_file() It appears the error return should be negative Signed-off-by: Roel Kluin Signed-off-by: Chris Mason --- fs/btrfs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index ae96fdae1f7d..413a30dafcda 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1133,7 +1133,7 @@ int btrfs_sync_file(struct file *file, struct dentry *dentry, int datasync) } mutex_lock(&dentry->d_inode->i_mutex); out: - return ret > 0 ? EIO : ret; + return ret > 0 ? -EIO : ret; } static const struct vm_operations_struct btrfs_file_vm_ops = { From d7ce5843bb28ada6845ab2ae8510ba3f12d33154 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Tue, 2 Feb 2010 08:46:44 +0000 Subject: [PATCH 1596/1626] Btrfs: remove BUG_ON() due to mounting bad filesystem Mounting a bad filesystem caused a BUG_ON(). The following is steps to reproduce it. # mkfs.btrfs /dev/sda2 # mount /dev/sda2 /mnt # mkfs.btrfs /dev/sda1 /dev/sda2 (the program says that /dev/sda2 was mounted, and then exits. ) # umount /mnt # mount /dev/sda1 /mnt At the third step, mkfs.btrfs exited in the way of make filesystem. So the initialization of the filesystem didn't finish. So the filesystem was bad, and it caused BUG_ON() when mounting it. But BUG_ON() should be called by the wrong code, not user's operation, so I think it is a bug of btrfs. This patch fixes it. Signed-off-by: Miao Xie Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 7 ++++++- fs/btrfs/relocation.c | 3 ++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 87b25543d7d1..2b59201b955c 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1982,7 +1982,12 @@ struct btrfs_root *open_ctree(struct super_block *sb, if (!(sb->s_flags & MS_RDONLY)) { ret = btrfs_recover_relocation(tree_root); - BUG_ON(ret); + if (ret < 0) { + printk(KERN_WARNING + "btrfs: failed to recover relocation\n"); + err = -EINVAL; + goto fail_trans_kthread; + } } location.objectid = BTRFS_FS_TREE_OBJECTID; diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index ed3e4a2ec2c8..ab7ab5318745 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -3764,7 +3764,8 @@ out: BTRFS_DATA_RELOC_TREE_OBJECTID); if (IS_ERR(fs_root)) err = PTR_ERR(fs_root); - btrfs_orphan_cleanup(fs_root); + else + btrfs_orphan_cleanup(fs_root); } return err; } From 7a7965f83e89f0be506a96769938a721e4e5ae50 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Mon, 1 Feb 2010 02:41:17 +0000 Subject: [PATCH 1597/1626] Btrfs: Fix oopsen when dropping empty tree. When dropping a empty tree, walk_down_tree() skips checking extent information for the tree root. This will triggers a BUG_ON in walk_up_proc(). Signed-off-by: Yan Zheng Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 432a2da4641e..559f72489b3b 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5402,10 +5402,6 @@ static noinline int walk_down_tree(struct btrfs_trans_handle *trans, int ret; while (level >= 0) { - if (path->slots[level] >= - btrfs_header_nritems(path->nodes[level])) - break; - ret = walk_down_proc(trans, root, path, wc, lookup_info); if (ret > 0) break; @@ -5413,6 +5409,10 @@ static noinline int walk_down_tree(struct btrfs_trans_handle *trans, if (level == 0) break; + if (path->slots[level] >= + btrfs_header_nritems(path->nodes[level])) + break; + ret = do_walk_down(trans, root, path, wc, &lookup_info); if (ret > 0) { path->slots[level]++; From efd049fb26a162c3830fd3cb1001fdc09b147f3b Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 2 Feb 2010 20:50:10 +0000 Subject: [PATCH 1598/1626] Btrfs: do not try and lookup the file extent when finishing ordered io When running the following fio job [torrent] filename=torrent-test rw=randwrite size=4g filesize=4g bs=4k ioengine=sync you would see long stalls where no work was being done. That is because we were doing all this extra work to read in the file extent outside of the transaction, however in the random io case this ends up hurting us because the file extents are not there to begin with. So axe this logic, since we end up reading in the file extent when we go to update it anyway. This took the fio job from 11 mb/s with several ~10 second stalls to 24 mb/s to a couple of 1-2 second stalls. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 46 ++-------------------------------------------- 1 file changed, 2 insertions(+), 44 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 8cd109972fa6..6782aa19130d 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1681,24 +1681,6 @@ static int insert_reserved_file_extent(struct btrfs_trans_handle *trans, * before we start the transaction. It limits the amount of btree * reads required while inside the transaction. */ -static noinline void reada_csum(struct btrfs_root *root, - struct btrfs_path *path, - struct btrfs_ordered_extent *ordered_extent) -{ - struct btrfs_ordered_sum *sum; - u64 bytenr; - - sum = list_entry(ordered_extent->list.next, struct btrfs_ordered_sum, - list); - bytenr = sum->sums[0].bytenr; - - /* - * we don't care about the results, the point of this search is - * just to get the btree leaves into ram - */ - btrfs_lookup_csum(NULL, root->fs_info->csum_root, path, bytenr, 0); -} - /* as ordered data IO finishes, this gets called so we can finish * an ordered extent if the range of bytes in the file it covers are * fully written. @@ -1709,7 +1691,6 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) struct btrfs_trans_handle *trans; struct btrfs_ordered_extent *ordered_extent = NULL; struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree; - struct btrfs_path *path; int compressed = 0; int ret; @@ -1717,32 +1698,9 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) if (!ret) return 0; - /* - * before we join the transaction, try to do some of our IO. - * This will limit the amount of IO that we have to do with - * the transaction running. We're unlikely to need to do any - * IO if the file extents are new, the disk_i_size checks - * covers the most common case. - */ - if (start < BTRFS_I(inode)->disk_i_size) { - path = btrfs_alloc_path(); - if (path) { - ret = btrfs_lookup_file_extent(NULL, root, path, - inode->i_ino, - start, 0); - ordered_extent = btrfs_lookup_ordered_extent(inode, - start); - if (!list_empty(&ordered_extent->list)) { - btrfs_release_path(root, path); - reada_csum(root, path, ordered_extent); - } - btrfs_free_path(path); - } - } - - if (!ordered_extent) - ordered_extent = btrfs_lookup_ordered_extent(inode, start); + ordered_extent = btrfs_lookup_ordered_extent(inode, start); BUG_ON(!ordered_extent); + if (test_bit(BTRFS_ORDERED_NOCOW, &ordered_extent->flags)) { BUG_ON(!list_empty(&ordered_extent->list)); ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent); From 23b5c50945f2294add0137799400329c0ebba290 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Thu, 4 Feb 2010 11:33:03 -0500 Subject: [PATCH 1599/1626] Btrfs: apply updated fallocate i_size fix This version of the i_size fix for fallocate makes sure we only update the i_size when the current fallocate is really operating outside of i_size. Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 6782aa19130d..4deb280f8969 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5799,7 +5799,9 @@ static int prealloc_file_range(struct inode *inode, u64 start, u64 end, inode->i_ctime = CURRENT_TIME; BTRFS_I(inode)->flags |= BTRFS_INODE_PREALLOC; if (!(mode & FALLOC_FL_KEEP_SIZE) && - cur_offset > inode->i_size) { + (actual_len > inode->i_size) && + (cur_offset > inode->i_size)) { + if (cur_offset > actual_len) i_size = actual_len; else From 33c5fd121eabbccc9103daf6cda36941eb3c349f Mon Sep 17 00:00:00 2001 From: David John Date: Wed, 27 Jan 2010 15:19:08 +0530 Subject: [PATCH 1600/1626] drm/i915: Disable SR when more than one pipe is enabled Self Refresh should be disabled on dual plane configs. Otherwise, as the SR watermark is not calculated for such configs, switching to non VGA mode causes FIFO underrun and display flicker. This fixes Korg Bug #14897. Signed-off-by: David John Signed-off-by: Jesse Barnes Cc: stable@kernel.org Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 5f14dfbf715c..12775df1bbfd 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2520,6 +2520,10 @@ static void g4x_update_wm(struct drm_device *dev, int planea_clock, sr_entries = roundup(sr_entries / cacheline_size, 1); DRM_DEBUG("self-refresh entries: %d\n", sr_entries); I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); + } else { + /* Turn off self refresh if both pipes are enabled */ + I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) + & ~FW_BLC_SELF_EN); } DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n", @@ -2563,6 +2567,10 @@ static void i965_update_wm(struct drm_device *dev, int planea_clock, srwm = 1; srwm &= 0x3f; I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); + } else { + /* Turn off self refresh if both pipes are enabled */ + I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) + & ~FW_BLC_SELF_EN); } DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n", @@ -2631,6 +2639,10 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock, if (srwm < 0) srwm = 1; I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN | (srwm & 0x3f)); + } else { + /* Turn off self refresh if both pipes are enabled */ + I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) + & ~FW_BLC_SELF_EN); } DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n", From 67026e03244d76b8f1fa725b079d4182fe8910aa Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Tue, 2 Feb 2010 20:09:04 +0100 Subject: [PATCH 1601/1626] drm/i915: slow acpi_lid_open() causes flickering - V2 acpi_lid_open() could take up to 10ms on my computer. Some component is calling the drm GETCONNECTOR ioctl many times in a row. This results in flickering (for example, when starting a video). Fix it by assuming an always connected lid status. Signed-off-by: Thomas Meyer Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_lvds.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 75a9772061cb..b1d0acbae4e4 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -622,6 +622,13 @@ static const struct dmi_system_id bad_lid_status[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire one"), }, }, + { + .ident = "Aspire 1810T", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1810T"), + }, + }, { .ident = "PC-81005", .matches = { @@ -643,7 +650,7 @@ static enum drm_connector_status intel_lvds_detect(struct drm_connector *connect { enum drm_connector_status status = connector_status_connected; - if (!acpi_lid_open() && !dmi_check_system(bad_lid_status)) + if (!dmi_check_system(bad_lid_status) && !acpi_lid_open()) status = connector_status_disconnected; return status; From 93533c291a0af78ca57115fc44d2e6c4c9517cd2 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 31 Jan 2010 10:40:48 +0000 Subject: [PATCH 1602/1626] drm/i915: Fix leak of relocs along do_execbuffer error path Following a gpu hang, we would leak the relocation buffer. So simply earrange the error path to always free the relocation buffer. Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 1ef7ec4f38fe..be0fd1a63321 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3584,6 +3584,9 @@ i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object2 *exec_list, uint32_t reloc_count = 0, i; int ret = 0; + if (relocs == NULL) + return 0; + for (i = 0; i < buffer_count; i++) { struct drm_i915_gem_relocation_entry __user *user_relocs; int unwritten; @@ -3673,7 +3676,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, struct drm_gem_object *batch_obj; struct drm_i915_gem_object *obj_priv; struct drm_clip_rect *cliprects = NULL; - struct drm_i915_gem_relocation_entry *relocs; + struct drm_i915_gem_relocation_entry *relocs = NULL; int ret = 0, ret2, i, pinned = 0; uint64_t exec_offset; uint32_t seqno, flush_domains, reloc_index; @@ -3950,6 +3953,7 @@ err: mutex_unlock(&dev->struct_mutex); +pre_mutex_err: /* Copy the updated relocations out regardless of current error * state. Failure to update the relocs would mean that the next * time userland calls execbuf, it would do so with presumed offset @@ -3964,7 +3968,6 @@ err: ret = ret2; } -pre_mutex_err: drm_free_large(object_list); kfree(cliprects); From 21956b61f594f7924d98240da74bc81c28601fa9 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Tue, 2 Feb 2010 19:58:25 +0100 Subject: [PATCH 1603/1626] ALSA: ctxfi - fix PTP address initialization After hours of debugging, I finally found the reason why some source and runtime combination does not work. The PTP (page table pages) address must be aligned. I am not sure how much, but alignment to PAGE_SIZE is sufficient. Also, use ALSA's page allocation routines to ensure proper virtual -> physical address translation. Cc: Signed-off-by: Jaroslav Kysela --- sound/pci/ctxfi/ctatc.c | 15 ++------------- sound/pci/ctxfi/ctvmem.c | 38 ++++++++++++++++++-------------------- sound/pci/ctxfi/ctvmem.h | 8 +++++--- 3 files changed, 25 insertions(+), 36 deletions(-) diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c index cb65bd0dd35b..459c1f62783b 100644 --- a/sound/pci/ctxfi/ctatc.c +++ b/sound/pci/ctxfi/ctatc.c @@ -166,18 +166,7 @@ static void ct_unmap_audio_buffer(struct ct_atc *atc, struct ct_atc_pcm *apcm) static unsigned long atc_get_ptp_phys(struct ct_atc *atc, int index) { - struct ct_vm *vm; - void *kvirt_addr; - unsigned long phys_addr; - - vm = atc->vm; - kvirt_addr = vm->get_ptp_virt(vm, index); - if (kvirt_addr == NULL) - phys_addr = (~0UL); - else - phys_addr = virt_to_phys(kvirt_addr); - - return phys_addr; + return atc->vm->get_ptp_phys(atc->vm, index); } static unsigned int convert_format(snd_pcm_format_t snd_format) @@ -1669,7 +1658,7 @@ int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci, } /* Set up device virtual memory management object */ - err = ct_vm_create(&atc->vm); + err = ct_vm_create(&atc->vm, pci); if (err < 0) goto error1; diff --git a/sound/pci/ctxfi/ctvmem.c b/sound/pci/ctxfi/ctvmem.c index 6b78752e9503..65da6e466f80 100644 --- a/sound/pci/ctxfi/ctvmem.c +++ b/sound/pci/ctxfi/ctvmem.c @@ -138,7 +138,7 @@ ct_vm_map(struct ct_vm *vm, struct snd_pcm_substream *substream, int size) return NULL; } - ptp = vm->ptp[0]; + ptp = (unsigned long *)vm->ptp[0].area; pte_start = (block->addr >> CT_PAGE_SHIFT); pages = block->size >> CT_PAGE_SHIFT; for (i = 0; i < pages; i++) { @@ -158,25 +158,25 @@ static void ct_vm_unmap(struct ct_vm *vm, struct ct_vm_block *block) } /* * - * return the host (kmalloced) addr of the @index-th device - * page talbe page on success, or NULL on failure. - * The first returned NULL indicates the termination. + * return the host physical addr of the @index-th device + * page table page on success, or ~0UL on failure. + * The first returned ~0UL indicates the termination. * */ -static void * -ct_get_ptp_virt(struct ct_vm *vm, int index) +static dma_addr_t +ct_get_ptp_phys(struct ct_vm *vm, int index) { - void *addr; + dma_addr_t addr; - addr = (index >= CT_PTP_NUM) ? NULL : vm->ptp[index]; + addr = (index >= CT_PTP_NUM) ? ~0UL : vm->ptp[index].addr; return addr; } -int ct_vm_create(struct ct_vm **rvm) +int ct_vm_create(struct ct_vm **rvm, struct pci_dev *pci) { struct ct_vm *vm; struct ct_vm_block *block; - int i; + int i, err = 0; *rvm = NULL; @@ -188,23 +188,21 @@ int ct_vm_create(struct ct_vm **rvm) /* Allocate page table pages */ for (i = 0; i < CT_PTP_NUM; i++) { - vm->ptp[i] = kmalloc(PAGE_SIZE, GFP_KERNEL); - if (!vm->ptp[i]) + err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, + snd_dma_pci_data(pci), + PAGE_SIZE, &vm->ptp[i]); + if (err < 0) break; } - if (!i) { + if (err < 0) { /* no page table pages are allocated */ - kfree(vm); + ct_vm_destroy(vm); return -ENOMEM; } vm->size = CT_ADDRS_PER_PAGE * i; - /* Initialise remaining ptps */ - for (; i < CT_PTP_NUM; i++) - vm->ptp[i] = NULL; - vm->map = ct_vm_map; vm->unmap = ct_vm_unmap; - vm->get_ptp_virt = ct_get_ptp_virt; + vm->get_ptp_phys = ct_get_ptp_phys; INIT_LIST_HEAD(&vm->unused); INIT_LIST_HEAD(&vm->used); block = kzalloc(sizeof(*block), GFP_KERNEL); @@ -242,7 +240,7 @@ void ct_vm_destroy(struct ct_vm *vm) /* free allocated page table pages */ for (i = 0; i < CT_PTP_NUM; i++) - kfree(vm->ptp[i]); + snd_dma_free_pages(&vm->ptp[i]); vm->size = 0; diff --git a/sound/pci/ctxfi/ctvmem.h b/sound/pci/ctxfi/ctvmem.h index 01e4fd0386a3..b23adfca4de6 100644 --- a/sound/pci/ctxfi/ctvmem.h +++ b/sound/pci/ctxfi/ctvmem.h @@ -22,6 +22,8 @@ #include #include +#include +#include /* The chip can handle the page table of 4k pages * (emu20k1 can handle even 8k pages, but we don't use it right now) @@ -41,7 +43,7 @@ struct snd_pcm_substream; /* Virtual memory management object for card device */ struct ct_vm { - void *ptp[CT_PTP_NUM]; /* Device page table pages */ + struct snd_dma_buffer ptp[CT_PTP_NUM]; /* Device page table pages */ unsigned int size; /* Available addr space in bytes */ struct list_head unused; /* List of unused blocks */ struct list_head used; /* List of used blocks */ @@ -52,10 +54,10 @@ struct ct_vm { int size); /* Unmap device logical addr area. */ void (*unmap)(struct ct_vm *, struct ct_vm_block *block); - void *(*get_ptp_virt)(struct ct_vm *vm, int index); + dma_addr_t (*get_ptp_phys)(struct ct_vm *vm, int index); }; -int ct_vm_create(struct ct_vm **rvm); +int ct_vm_create(struct ct_vm **rvm, struct pci_dev *pci); void ct_vm_destroy(struct ct_vm *vm); #endif /* CTVMEM_H */ From 6f14a668f1a8b715a6e855f4e32705e54a6e86a1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 4 Feb 2010 17:57:37 +0900 Subject: [PATCH 1604/1626] idr: revert misallocation bug fix Commit 859ddf09743a8cc680af33f7259ccd0fd36bfe9d tried to fix misallocation bug but broke full bit marking by not clearing pa[idp->layers] and also is causing X failures due to lookup failure in drm code. The cause of the latter hasn't been found yet. Revert the fix for now. Signed-off-by: Tejun Heo Signed-off-by: Linus Torvalds --- lib/idr.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/lib/idr.c b/lib/idr.c index ba7d37cf7847..1cac726c44bc 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -140,7 +140,8 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa) id = *starting_id; restart: p = idp->top; - l = p->layer; + l = idp->layers; + pa[l--] = NULL; while (1) { /* * We run around this while until we reach the leaf node... @@ -154,8 +155,8 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa) oid = id; id = (id | ((1 << (IDR_BITS * l)) - 1)) + 1; - /* did id go over the limit? */ - if (id >= (1 << (idp->layers * IDR_BITS))) { + /* if already at the top layer, we need to grow */ + if (!(p = pa[l])) { *starting_id = id; return IDR_NEED_TO_GROW; } From c38c7b64a2747a211c3a6e8e5919ee25ccd474e7 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 4 Feb 2010 17:27:27 +0100 Subject: [PATCH 1605/1626] drm/radeon/kms: move blit initialization after we disabled VGA VGA might be overwritting VRAM and corrupt our blit shader leading to corruption, it likely won't happen if you load fbcon right after radeon. Thanks to Shawn Starr and Andre Maasikas for tracking down this issue. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 12 ++++++------ drivers/gpu/drm/radeon/rv770.c | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index b833b4b97162..8c94040cb7f2 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1861,6 +1861,12 @@ int r600_startup(struct radeon_device *rdev) return r; } r600_gpu_init(rdev); + r = r600_blit_init(rdev); + if (r) { + r600_blit_fini(rdev); + rdev->asic->copy = NULL; + dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r); + } /* pin copy shader into vram */ if (rdev->r600_blit.shader_obj) { r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); @@ -2045,12 +2051,6 @@ int r600_init(struct radeon_device *rdev) r = r600_pcie_gart_init(rdev); if (r) return r; - r = r600_blit_init(rdev); - if (r) { - r600_blit_fini(rdev); - rdev->asic->copy = NULL; - dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r); - } rdev->accel_working = true; r = r600_startup(rdev); diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 2d465768ac71..06b037eebef5 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -887,6 +887,12 @@ static int rv770_startup(struct radeon_device *rdev) return r; } rv770_gpu_init(rdev); + r = r600_blit_init(rdev); + if (r) { + r600_blit_fini(rdev); + rdev->asic->copy = NULL; + dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r); + } /* pin copy shader into vram */ if (rdev->r600_blit.shader_obj) { r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); @@ -1055,12 +1061,6 @@ int rv770_init(struct radeon_device *rdev) r = r600_pcie_gart_init(rdev); if (r) return r; - r = r600_blit_init(rdev); - if (r) { - r600_blit_fini(rdev); - rdev->asic->copy = NULL; - dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r); - } rdev->accel_working = true; r = rv770_startup(rdev); From 062b389c8704e539e234cfd67c7e034a514f50bf Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 4 Feb 2010 20:36:39 +0100 Subject: [PATCH 1606/1626] drm/radeon/kms: fix regression rendering issue on R6XX/R7XX It seems that some R6XX/R7XX silently ignore HDP flush when programmed through ring, this patch addback an ioctl callback to allow R6XX/R7XX hw to perform such flush through MMIO in order to fix a regression. For more details see: http://bugzilla.kernel.org/show_bug.cgi?id=15186 Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 15 +++++++++++++++ drivers/gpu/drm/radeon/radeon.h | 7 +++++++ drivers/gpu/drm/radeon/radeon_asic.h | 11 +++++++++++ drivers/gpu/drm/radeon/radeon_gem.c | 3 +++ 4 files changed, 36 insertions(+) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 8c94040cb7f2..45d565bae71b 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2900,3 +2900,18 @@ int r600_debugfs_mc_info_init(struct radeon_device *rdev) return 0; #endif } + +/** + * r600_ioctl_wait_idle - flush host path cache on wait idle ioctl + * rdev: radeon device structure + * bo: buffer object struct which userspace is waiting for idle + * + * Some R6XX/R7XX doesn't seems to take into account HDP flush performed + * through ring buffer, this leads to corruption in rendering, see + * http://bugzilla.kernel.org/show_bug.cgi?id=15186 to avoid this we + * directly perform HDP flush by writing register through MMIO. + */ +void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo) +{ + WREG32(R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL, 0x1); +} diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 2d5f2bfa7201..37150fc406b5 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -661,6 +661,13 @@ struct radeon_asic { void (*hpd_fini)(struct radeon_device *rdev); bool (*hpd_sense)(struct radeon_device *rdev, enum radeon_hpd_id hpd); void (*hpd_set_polarity)(struct radeon_device *rdev, enum radeon_hpd_id hpd); + /* ioctl hw specific callback. Some hw might want to perform special + * operation on specific ioctl. For instance on wait idle some hw + * might want to perform and HDP flush through MMIO as it seems that + * some R6XX/R7XX hw doesn't take HDP flush into account if programmed + * through ring. + */ + void (*ioctl_wait_idle)(struct radeon_device *rdev, struct radeon_bo *bo); }; /* diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index f2fbd2e4e9df..05ee1aeac3fd 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -117,6 +117,7 @@ static struct radeon_asic r100_asic = { .hpd_fini = &r100_hpd_fini, .hpd_sense = &r100_hpd_sense, .hpd_set_polarity = &r100_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; @@ -176,6 +177,7 @@ static struct radeon_asic r300_asic = { .hpd_fini = &r100_hpd_fini, .hpd_sense = &r100_hpd_sense, .hpd_set_polarity = &r100_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; /* @@ -219,6 +221,7 @@ static struct radeon_asic r420_asic = { .hpd_fini = &r100_hpd_fini, .hpd_sense = &r100_hpd_sense, .hpd_set_polarity = &r100_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; @@ -267,6 +270,7 @@ static struct radeon_asic rs400_asic = { .hpd_fini = &r100_hpd_fini, .hpd_sense = &r100_hpd_sense, .hpd_set_polarity = &r100_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; @@ -323,6 +327,7 @@ static struct radeon_asic rs600_asic = { .hpd_fini = &rs600_hpd_fini, .hpd_sense = &rs600_hpd_sense, .hpd_set_polarity = &rs600_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; @@ -370,6 +375,7 @@ static struct radeon_asic rs690_asic = { .hpd_fini = &rs600_hpd_fini, .hpd_sense = &rs600_hpd_sense, .hpd_set_polarity = &rs600_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; @@ -421,6 +427,7 @@ static struct radeon_asic rv515_asic = { .hpd_fini = &rs600_hpd_fini, .hpd_sense = &rs600_hpd_sense, .hpd_set_polarity = &rs600_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; @@ -463,6 +470,7 @@ static struct radeon_asic r520_asic = { .hpd_fini = &rs600_hpd_fini, .hpd_sense = &rs600_hpd_sense, .hpd_set_polarity = &rs600_hpd_set_polarity, + .ioctl_wait_idle = NULL, }; /* @@ -504,6 +512,7 @@ void r600_hpd_fini(struct radeon_device *rdev); bool r600_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd); void r600_hpd_set_polarity(struct radeon_device *rdev, enum radeon_hpd_id hpd); +extern void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo); static struct radeon_asic r600_asic = { .init = &r600_init, @@ -538,6 +547,7 @@ static struct radeon_asic r600_asic = { .hpd_fini = &r600_hpd_fini, .hpd_sense = &r600_hpd_sense, .hpd_set_polarity = &r600_hpd_set_polarity, + .ioctl_wait_idle = r600_ioctl_wait_idle, }; /* @@ -582,6 +592,7 @@ static struct radeon_asic rv770_asic = { .hpd_fini = &r600_hpd_fini, .hpd_sense = &r600_hpd_sense, .hpd_set_polarity = &r600_hpd_set_polarity, + .ioctl_wait_idle = r600_ioctl_wait_idle, }; #endif diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index 0e1325e18534..db8e9a355a01 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -308,6 +308,9 @@ int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data, } robj = gobj->driver_private; r = radeon_bo_wait(robj, NULL, false); + /* callback hw specific functions if any */ + if (robj->rdev->asic->ioctl_wait_idle) + robj->rdev->asic->ioctl_wait_idle(robj->rdev, robj); mutex_lock(&dev->struct_mutex); drm_gem_object_unreference(gobj); mutex_unlock(&dev->struct_mutex); From 9e5b2af75abc67c13005c706cf95bbbb78f7fddc Mon Sep 17 00:00:00 2001 From: Pauli Nieminen Date: Thu, 4 Feb 2010 19:20:53 +0200 Subject: [PATCH 1607/1626] drm/r100/kms: Emit cache flush to the end of command buffer. (v2) Cache flush is required in case CPU is accessing rendered data. This fixes glean/readPixSanity test case and random rendering errors in sauerbraten and warzone2100. v2 Fix comment ordering in r100_fence_ring_emit and remove extra defines added in first version. Signed-off-by: Pauli Nieminen Reviewed-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 11c9a3fe6810..626e79023e30 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -354,11 +354,17 @@ u32 r100_get_vblank_counter(struct radeon_device *rdev, int crtc) return RREG32(RADEON_CRTC2_CRNT_FRAME); } +/* Who ever call radeon_fence_emit should call ring_lock and ask + * for enough space (today caller are ib schedule and buffer move) */ void r100_fence_ring_emit(struct radeon_device *rdev, struct radeon_fence *fence) { - /* Who ever call radeon_fence_emit should call ring_lock and ask - * for enough space (today caller are ib schedule and buffer move) */ + /* We have to make sure that caches are flushed before + * CPU might read something from VRAM. */ + radeon_ring_write(rdev, PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0)); + radeon_ring_write(rdev, RADEON_RB3D_DC_FLUSH_ALL); + radeon_ring_write(rdev, PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0)); + radeon_ring_write(rdev, RADEON_RB3D_ZC_FLUSH_ALL); /* Wait until IDLE & CLEAN */ radeon_ring_write(rdev, PACKET0(0x1720, 0)); radeon_ring_write(rdev, (1 << 16) | (1 << 17)); From d7748bacbbee80b2cc4b690a74d5db2cd84acd7b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 2 Feb 2010 14:40:33 -0800 Subject: [PATCH 1608/1626] ati_pcigart: fix printk format warning Fix ati_pcigart printk format warning: drivers/gpu/drm/ati_pcigart.c:115: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'dma_addr_t' Signed-off-by: Randy Dunlap Cc: Zhenyu Wang Cc: Dave Airlie Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie --- drivers/gpu/drm/ati_pcigart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/ati_pcigart.c b/drivers/gpu/drm/ati_pcigart.c index a1fce68e3bbe..17be051b7aa3 100644 --- a/drivers/gpu/drm/ati_pcigart.c +++ b/drivers/gpu/drm/ati_pcigart.c @@ -113,7 +113,7 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga if (pci_set_dma_mask(dev->pdev, gart_info->table_mask)) { DRM_ERROR("fail to set dma mask to 0x%Lx\n", - gart_info->table_mask); + (unsigned long long)gart_info->table_mask); ret = 1; goto done; } From 94cf6434a1bc5958d5da3be62f1272792dada2bf Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 2 Feb 2010 14:40:29 -0800 Subject: [PATCH 1609/1626] drivers/gpu/drm/radeon/radeon_combios.c: fix warning drivers/gpu/drm/radeon/radeon_combios.c: In function 'radeon_combios_get_lvds_info': drivers/gpu/drm/radeon/radeon_combios.c:893: warning: comparison is always false due to limited range of data type Cc: Dave Airlie Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 579c8920e081..e7b19440102e 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -971,8 +971,7 @@ struct radeon_encoder_lvds *radeon_combios_get_lvds_info(struct radeon_encoder lvds->native_mode.vdisplay); lvds->panel_vcc_delay = RBIOS16(lcd_info + 0x2c); - if (lvds->panel_vcc_delay > 2000 || lvds->panel_vcc_delay < 0) - lvds->panel_vcc_delay = 2000; + lvds->panel_vcc_delay = min_t(u16, lvds->panel_vcc_delay, 2000); lvds->panel_pwr_delay = RBIOS8(lcd_info + 0x24); lvds->panel_digon_delay = RBIOS16(lcd_info + 0x38) & 0xf; From 655efd3dc92cd0d37292157178d33deb0430aeaa Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Tue, 2 Feb 2010 11:51:45 +0100 Subject: [PATCH 1610/1626] drm/radeon/kms: don't call suspend path before cleaning up GPU In suspend path we unmap the GART table while in cleaning up path we will unbind buffer and thus try to write to unmapped GART leading to oops. In order to avoid this we don't call the suspend path in cleanup path. Cleanup path is clever enough to desactive GPU like the suspend path is doing, thus this was redondant. Tested on: RV370, R420, RV515, RV570, RV610, RV770 (all PCIE) Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 4 +--- drivers/gpu/drm/radeon/r300.c | 5 ++--- drivers/gpu/drm/radeon/r420.c | 3 +-- drivers/gpu/drm/radeon/r520.c | 3 +-- drivers/gpu/drm/radeon/r600.c | 21 +++++++++++++-------- drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/rs400.c | 2 -- drivers/gpu/drm/radeon/rs600.c | 2 -- drivers/gpu/drm/radeon/rs690.c | 2 -- drivers/gpu/drm/radeon/rv515.c | 4 +--- drivers/gpu/drm/radeon/rv770.c | 12 ++++++------ 11 files changed, 26 insertions(+), 33 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 626e79023e30..c0d4650cdb79 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3375,7 +3375,6 @@ int r100_suspend(struct radeon_device *rdev) void r100_fini(struct radeon_device *rdev) { - r100_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); @@ -3487,13 +3486,12 @@ int r100_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - r100_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); + radeon_irq_kms_fini(rdev); if (rdev->flags & RADEON_IS_PCI) r100_pci_gart_fini(rdev); - radeon_irq_kms_fini(rdev); rdev->accel_working = false; } return 0; diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 0051d11b907c..e699e6d053dd 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -1327,7 +1327,6 @@ int r300_suspend(struct radeon_device *rdev) void r300_fini(struct radeon_device *rdev) { - r300_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); @@ -1418,15 +1417,15 @@ int r300_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - r300_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); + radeon_irq_kms_fini(rdev); if (rdev->flags & RADEON_IS_PCIE) rv370_pcie_gart_fini(rdev); if (rdev->flags & RADEON_IS_PCI) r100_pci_gart_fini(rdev); - radeon_irq_kms_fini(rdev); + radeon_agp_fini(rdev); rdev->accel_working = false; } return 0; diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index 4526faaacca8..d9373246c97f 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -389,16 +389,15 @@ int r420_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - r420_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); + radeon_irq_kms_fini(rdev); if (rdev->flags & RADEON_IS_PCIE) rv370_pcie_gart_fini(rdev); if (rdev->flags & RADEON_IS_PCI) r100_pci_gart_fini(rdev); radeon_agp_fini(rdev); - radeon_irq_kms_fini(rdev); rdev->accel_working = false; } return 0; diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index 9a189072f2b9..ddf5731eba0d 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -294,13 +294,12 @@ int r520_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - rv515_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); + radeon_irq_kms_fini(rdev); rv370_pcie_gart_fini(rdev); radeon_agp_fini(rdev); - radeon_irq_kms_fini(rdev); rdev->accel_working = false; } return 0; diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 45d565bae71b..9661a469f3bd 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1654,6 +1654,12 @@ void r600_ring_init(struct radeon_device *rdev, unsigned ring_size) rdev->cp.align_mask = 16 - 1; } +void r600_cp_fini(struct radeon_device *rdev) +{ + r600_cp_stop(rdev); + radeon_ring_fini(rdev); +} + /* * GPU scratch registers helpers function. @@ -2055,9 +2061,11 @@ int r600_init(struct radeon_device *rdev) rdev->accel_working = true; r = r600_startup(rdev); if (r) { - r600_suspend(rdev); + dev_err(rdev->dev, "disabling GPU acceleration\n"); + r600_cp_fini(rdev); r600_wb_fini(rdev); - radeon_ring_fini(rdev); + r600_irq_fini(rdev); + radeon_irq_kms_fini(rdev); r600_pcie_gart_fini(rdev); rdev->accel_working = false; } @@ -2083,20 +2091,17 @@ int r600_init(struct radeon_device *rdev) void r600_fini(struct radeon_device *rdev) { - /* Suspend operations */ - r600_suspend(rdev); - r600_audio_fini(rdev); r600_blit_fini(rdev); + r600_cp_fini(rdev); + r600_wb_fini(rdev); r600_irq_fini(rdev); radeon_irq_kms_fini(rdev); - radeon_ring_fini(rdev); - r600_wb_fini(rdev); r600_pcie_gart_fini(rdev); + radeon_agp_fini(rdev); radeon_gem_fini(rdev); radeon_fence_driver_fini(rdev); radeon_clocks_fini(rdev); - radeon_agp_fini(rdev); radeon_bo_fini(rdev); radeon_atombios_fini(rdev); kfree(rdev->bios); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 37150fc406b5..f57480ba1355 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1150,6 +1150,7 @@ extern bool r600_card_posted(struct radeon_device *rdev); extern void r600_cp_stop(struct radeon_device *rdev); extern void r600_ring_init(struct radeon_device *rdev, unsigned ring_size); extern int r600_cp_resume(struct radeon_device *rdev); +extern void r600_cp_fini(struct radeon_device *rdev); extern int r600_count_pipe_bits(uint32_t val); extern int r600_gart_clear_page(struct radeon_device *rdev, int i); extern int r600_mc_wait_for_idle(struct radeon_device *rdev); diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index 9f5418983e2a..eeeb0d6d7a44 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -448,7 +448,6 @@ int rs400_suspend(struct radeon_device *rdev) void rs400_fini(struct radeon_device *rdev) { - rs400_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); @@ -527,7 +526,6 @@ int rs400_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - rs400_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index d5255751e7b3..c3818562a13e 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -610,7 +610,6 @@ int rs600_suspend(struct radeon_device *rdev) void rs600_fini(struct radeon_device *rdev) { - rs600_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); @@ -689,7 +688,6 @@ int rs600_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - rs600_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index cd31da913771..06e2771aee5a 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -676,7 +676,6 @@ int rs690_suspend(struct radeon_device *rdev) void rs690_fini(struct radeon_device *rdev) { - rs690_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); @@ -756,7 +755,6 @@ int rs690_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - rs690_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 62756717b044..0e1e6b8632b8 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -537,7 +537,6 @@ void rv515_set_safe_registers(struct radeon_device *rdev) void rv515_fini(struct radeon_device *rdev) { - rv515_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); @@ -615,13 +614,12 @@ int rv515_init(struct radeon_device *rdev) if (r) { /* Somethings want wront with the accel init stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); - rv515_suspend(rdev); r100_cp_fini(rdev); r100_wb_fini(rdev); r100_ib_fini(rdev); + radeon_irq_kms_fini(rdev); rv370_pcie_gart_fini(rdev); radeon_agp_fini(rdev); - radeon_irq_kms_fini(rdev); rdev->accel_working = false; } return 0; diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 06b037eebef5..c9320e727986 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -1065,9 +1065,11 @@ int rv770_init(struct radeon_device *rdev) rdev->accel_working = true; r = rv770_startup(rdev); if (r) { - rv770_suspend(rdev); + dev_err(rdev->dev, "disabling GPU acceleration\n"); + r600_cp_fini(rdev); r600_wb_fini(rdev); - radeon_ring_fini(rdev); + r600_irq_fini(rdev); + radeon_irq_kms_fini(rdev); rv770_pcie_gart_fini(rdev); rdev->accel_working = false; } @@ -1089,13 +1091,11 @@ int rv770_init(struct radeon_device *rdev) void rv770_fini(struct radeon_device *rdev) { - rv770_suspend(rdev); - r600_blit_fini(rdev); + r600_cp_fini(rdev); + r600_wb_fini(rdev); r600_irq_fini(rdev); radeon_irq_kms_fini(rdev); - radeon_ring_fini(rdev); - r600_wb_fini(rdev); rv770_pcie_gart_fini(rdev); radeon_gem_fini(rdev); radeon_fence_driver_fini(rdev); From 23fff28a9b0529869bffef8aab0d3f350dd3b5a4 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 5 Feb 2010 11:57:42 +1000 Subject: [PATCH 1611/1626] drm/radeon/kms: disable HDMI audio for now on rv710/rv730 Support isn't correct yet and we are getting green tinges on the displays. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_audio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r600_audio.c b/drivers/gpu/drm/radeon/r600_audio.c index 99e2c3891a7d..b1c1d3433454 100644 --- a/drivers/gpu/drm/radeon/r600_audio.c +++ b/drivers/gpu/drm/radeon/r600_audio.c @@ -35,7 +35,7 @@ */ static int r600_audio_chipset_supported(struct radeon_device *rdev) { - return rdev->family >= CHIP_R600 + return (rdev->family >= CHIP_R600 && rdev->family < CHIP_RV710) || rdev->family == CHIP_RS600 || rdev->family == CHIP_RS690 || rdev->family == CHIP_RS740; From 624ab4f87e99f10ea3b45e76039c477fd4d7a7e6 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 27 Jan 2010 16:07:15 +1000 Subject: [PATCH 1612/1626] drm/radeon/kms: make initial state of load detect property correct. this was incorrect on my rs480. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 55266416fa47..2d8e5a70f284 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -1343,7 +1343,7 @@ radeon_add_legacy_connector(struct drm_device *dev, radeon_connector->dac_load_detect = false; drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.load_detect_property, - 1); + radeon_connector->dac_load_detect); drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.tv_std_property, radeon_combios_get_tv_info(rdev)); From a17538f93c16f0e15e35dc31eedad87e2d9c5c26 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 5 Feb 2010 13:41:54 +1000 Subject: [PATCH 1613/1626] drm/radeon/kms: rs400/480 MC setup is different than r300. Boot testing on my rs480 laptop found the MC idle never happened on startup, a quick check with AMD found the idle bit is in a different place on the rs4xx than r300. Implement a new rs400 mc idle function to fix this. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/rs400.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index eeeb0d6d7a44..287fcebfb4e6 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -223,15 +223,31 @@ int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr) return 0; } +int rs400_mc_wait_for_idle(struct radeon_device *rdev) +{ + unsigned i; + uint32_t tmp; + + for (i = 0; i < rdev->usec_timeout; i++) { + /* read MC_STATUS */ + tmp = RREG32(0x0150); + if (tmp & (1 << 2)) { + return 0; + } + DRM_UDELAY(1); + } + return -1; +} + void rs400_gpu_init(struct radeon_device *rdev) { /* FIXME: HDP same place on rs400 ? */ r100_hdp_reset(rdev); /* FIXME: is this correct ? */ r420_pipes_init(rdev); - if (r300_mc_wait_for_idle(rdev)) { - printk(KERN_WARNING "Failed to wait MC idle while " - "programming pipes. Bad things might happen.\n"); + if (rs400_mc_wait_for_idle(rdev)) { + printk(KERN_WARNING "rs400: Failed to wait MC idle while " + "programming pipes. Bad things might happen. %08x\n", RREG32(0x150)); } } @@ -370,8 +386,8 @@ void rs400_mc_program(struct radeon_device *rdev) r100_mc_stop(rdev, &save); /* Wait for mc idle */ - if (r300_mc_wait_for_idle(rdev)) - dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n"); + if (rs400_mc_wait_for_idle(rdev)) + dev_warn(rdev->dev, "rs400: Wait MC idle timeout before updating MC.\n"); WREG32(R_000148_MC_FB_LOCATION, S_000148_MC_FB_START(rdev->mc.vram_start >> 16) | S_000148_MC_FB_TOP(rdev->mc.vram_end >> 16)); From 5ff55717674470b96562f931f778c878080755b7 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 5 Feb 2010 13:57:03 +1000 Subject: [PATCH 1614/1626] drm/radeon/kms: fix r300 vram width calculations This was incorrect according to the docs and the UMS driver does it like this. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r300.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index e699e6d053dd..43b55a030b4d 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -506,11 +506,14 @@ void r300_vram_info(struct radeon_device *rdev) /* DDR for all card after R300 & IGP */ rdev->mc.vram_is_ddr = true; + tmp = RREG32(RADEON_MEM_CNTL); - if (tmp & R300_MEM_NUM_CHANNELS_MASK) { - rdev->mc.vram_width = 128; - } else { - rdev->mc.vram_width = 64; + tmp &= R300_MEM_NUM_CHANNELS_MASK; + switch (tmp) { + case 0: rdev->mc.vram_width = 64; break; + case 1: rdev->mc.vram_width = 128; break; + case 2: rdev->mc.vram_width = 256; break; + default: rdev->mc.vram_width = 128; break; } r100_vram_init_sizes(rdev); From 1eb6dc7dabcb4aa762d96f4f6978f3ef86321d68 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Thu, 4 Feb 2010 22:21:47 +0200 Subject: [PATCH 1615/1626] ALSA: hda - Delay switching to polling mode if an interrupt was missing My sound codec seems sometimes (very rarely) to omit interrupts (ALC268) However, interrupt mode still works. Thus if we get timeout, poll the codec once. If we get 3 such polls in a row, then switch to polling mode. This patch is maybe an bandaid, but this might be a workaround for hardware bug. Signed-off-by: Maxim Levitsky Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 565de38a3fc7..d853e2c33bb7 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -426,6 +426,7 @@ struct azx { /* flags */ int position_fix; + int poll_count; unsigned int running :1; unsigned int initialized :1; unsigned int single_cmd :1; @@ -506,7 +507,7 @@ static char *driver_short_names[] __devinitdata = { #define get_azx_dev(substream) (substream->runtime->private_data) static int azx_acquire_irq(struct azx *chip, int do_disconnect); - +static int azx_send_cmd(struct hda_bus *bus, unsigned int val); /* * Interface for HD codec */ @@ -664,11 +665,12 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus, { struct azx *chip = bus->private_data; unsigned long timeout; + int do_poll = 0; again: timeout = jiffies + msecs_to_jiffies(1000); for (;;) { - if (chip->polling_mode) { + if (chip->polling_mode || do_poll) { spin_lock_irq(&chip->reg_lock); azx_update_rirb(chip); spin_unlock_irq(&chip->reg_lock); @@ -676,6 +678,9 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus, if (!chip->rirb.cmds[addr]) { smp_rmb(); bus->rirb_error = 0; + + if (!do_poll) + chip->poll_count = 0; return chip->rirb.res[addr]; /* the last value */ } if (time_after(jiffies, timeout)) @@ -688,6 +693,16 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus, } } + if (!chip->polling_mode && chip->poll_count < 2) { + snd_printdd(SFX "azx_get_response timeout, " + "polling the codec once: last cmd=0x%08x\n", + chip->last_cmd[addr]); + do_poll = 1; + chip->poll_count++; + goto again; + } + + if (!chip->polling_mode) { snd_printk(KERN_WARNING SFX "azx_get_response timeout, " "switching to polling mode: last cmd=0x%08x\n", From 9492837a6f54b069e13e40e3c89898bb8837a386 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Thu, 4 Feb 2010 22:26:37 +0200 Subject: [PATCH 1616/1626] ALSA: cosmetic: make hda intel interrupt name consistent with others This renames the interrupt name in /proc/interrupt. HDA Intel -> hda_intel This also eliminates space from the name, probably helping some parsers. Don't think anybody depends on this name in userspace Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index d853e2c33bb7..b8faa6dc5abe 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2058,7 +2058,7 @@ static int azx_acquire_irq(struct azx *chip, int do_disconnect) { if (request_irq(chip->pci->irq, azx_interrupt, chip->msi ? 0 : IRQF_SHARED, - "HDA Intel", chip)) { + "hda_intel", chip)) { printk(KERN_ERR "hda-intel: unable to grab IRQ %d, " "disabling device\n", chip->pci->irq); if (do_disconnect) From 9d4c7464458770d309169f7a7ce1ea6f8a4a7de5 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Fri, 5 Feb 2010 10:19:41 +0100 Subject: [PATCH 1617/1626] ALSA: ice1724 - aureon - fix wm8770 volume offset The volume register is from 0..0x7f and 0..0x1a range is mute. Also, fix mute combining in wm_vol_put(). The wrong behaviour was noticed by Peter Christensen. Signed-off-by: Jaroslav Kysela --- sound/pci/ice1712/aureon.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/sound/pci/ice1712/aureon.c b/sound/pci/ice1712/aureon.c index 765d7bd4c3d4..9e66f6d306f8 100644 --- a/sound/pci/ice1712/aureon.c +++ b/sound/pci/ice1712/aureon.c @@ -703,11 +703,13 @@ static void wm_set_vol(struct snd_ice1712 *ice, unsigned int index, unsigned sho { unsigned char nvol; - if ((master & WM_VOL_MUTE) || (vol & WM_VOL_MUTE)) + if ((master & WM_VOL_MUTE) || (vol & WM_VOL_MUTE)) { nvol = 0; - else + } else { nvol = ((vol % WM_VOL_CNT) * (master % WM_VOL_CNT)) / WM_VOL_MAX; + nvol += 0x1b; + } wm_put(ice, index, nvol); wm_put_nocache(ice, index, 0x180 | nvol); @@ -778,7 +780,7 @@ static int wm_master_vol_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_ for (ch = 0; ch < 2; ch++) { unsigned int vol = ucontrol->value.integer.value[ch]; if (vol > WM_VOL_MAX) - continue; + vol = WM_VOL_MAX; vol |= spec->master[ch] & WM_VOL_MUTE; if (vol != spec->master[ch]) { int dac; @@ -834,8 +836,8 @@ static int wm_vol_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value * for (i = 0; i < voices; i++) { unsigned int vol = ucontrol->value.integer.value[i]; if (vol > WM_VOL_MAX) - continue; - vol |= spec->vol[ofs+i]; + vol = WM_VOL_MAX; + vol |= spec->vol[ofs+i] & WM_VOL_MUTE; if (vol != spec->vol[ofs+i]) { spec->vol[ofs+i] = vol; idx = WM_DAC_ATTEN + ofs + i; From 3b9447fb7fa1829731290e64ef928d4f6461310a Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Fri, 5 Feb 2010 00:55:33 +0200 Subject: [PATCH 1618/1626] ASoC: pandora: Add APLL supply to fix audio output Pandora's external DAC is using 256*Fs output from the TWL4030 codec, and TWL4030 needs to have APLL enabled for it's 256*Fs output to function. Signed-off-by: Grazvydas Ignotas Acked-by: Peter Ujfalusi Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/omap/omap3pandora.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c index 71b2c161158d..68980c19a3bc 100644 --- a/sound/soc/omap/omap3pandora.c +++ b/sound/soc/omap/omap3pandora.c @@ -145,6 +145,7 @@ static const struct snd_soc_dapm_widget omap3pandora_in_dapm_widgets[] = { }; static const struct snd_soc_dapm_route omap3pandora_out_map[] = { + {"PCM DAC", NULL, "APLL Enable"}, {"Headphone Amplifier", NULL, "PCM DAC"}, {"Line Out", NULL, "PCM DAC"}, {"Headphone Jack", NULL, "Headphone Amplifier"}, From 2938429501b73f6aeb312236eac7ed0416a07cd5 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 5 Feb 2010 16:09:11 +1100 Subject: [PATCH 1619/1626] percpu: add __percpu for sparse This is to make the annotation of percpu variables during the next merge window less painfull. Extracted from a patch by Rusty Russell. Signed-off-by: Stephen Rothwell Acked-by: Tejun Heo Signed-off-by: Linus Torvalds --- include/linux/compiler.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 5be3dab4a695..188fcae10a99 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -15,6 +15,7 @@ # define __acquire(x) __context__(x,1) # define __release(x) __context__(x,-1) # define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0) +# define __percpu __attribute__((noderef, address_space(3))) extern void __chk_user_ptr(const volatile void __user *); extern void __chk_io_ptr(const volatile void __iomem *); #else @@ -32,6 +33,7 @@ extern void __chk_io_ptr(const volatile void __iomem *); # define __acquire(x) (void)0 # define __release(x) (void)0 # define __cond_lock(x,c) (c) +# define __percpu #endif #ifdef __KERNEL__ From 73d2eaac8a3f1ec1d6d0a80ea7302a439ca9b933 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 5 Feb 2010 01:42:43 -0500 Subject: [PATCH 1620/1626] CS5536: apply pci quirk for BIOS SMBUS bug The new cs5535-* drivers use PCI header config info rather than MSRs to determine the memory region to use for things like GPIOs and MFGPTs. As anticipated, we've run into a buggy BIOS: [ 0.081818] pci 0000:00:14.0: reg 10: [io 0x6000-0x7fff] [ 0.081906] pci 0000:00:14.0: reg 14: [io 0x6100-0x61ff] [ 0.082015] pci 0000:00:14.0: reg 18: [io 0x6200-0x63ff] [ 0.082917] pci 0000:00:14.2: reg 20: [io 0xe000-0xe00f] [ 0.083551] pci 0000:00:15.0: reg 10: [mem 0xa0010000-0xa0010fff] [ 0.084436] pci 0000:00:15.1: reg 10: [mem 0xa0011000-0xa0011fff] [ 0.088816] PCI: pci_cache_line_size set to 32 bytes [ 0.088938] pci 0000:00:14.0: address space collision: [io 0x6100-0x61ff] already in use [ 0.089052] pci 0000:00:14.0: can't reserve [io 0x6100-0x61ff] This is a Soekris board, and its BIOS sets the size of the PCI ISA bridge device's BAR0 to 8k. In reality, it should be 8 bytes (BAR0 is used for SMBus stuff). This quirk checks for an incorrect size, and resets it accordingly. Signed-off-by: Andres Salomon Tested-by: Leigh Porter Tested-by: Jens Rottmann Signed-off-by: Linus Torvalds --- drivers/pci/quirks.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index c74694345b6e..d58b94030ef3 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -338,6 +338,23 @@ static void __devinit quirk_s3_64M(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); +/* + * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS + * ver. 1.33 20070103) don't set the correct ISA PCI region header info. + * BAR0 should be 8 bytes; instead, it may be set to something like 8k + * (which conflicts w/ BAR1's memory range). + */ +static void __devinit quirk_cs5536_vsa(struct pci_dev *dev) +{ + if (pci_resource_len(dev, 0) != 8) { + struct resource *res = &dev->resource[0]; + res->end = res->start + 8 - 1; + dev_info(&dev->dev, "CS5536 ISA bridge bug detected " + "(incorrect header); workaround applied.\n"); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); + static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, unsigned size, int nr, const char *name) { From 85f8d3e5faea8bd36c3e5196f8334f7db45e19b2 Mon Sep 17 00:00:00 2001 From: Ray Copeland Date: Fri, 5 Feb 2010 19:58:35 +0100 Subject: [PATCH 1621/1626] hwmon: (adt7462) Wrong ADT7462_VOLT_COUNT The #define ADT7462_VOLT_COUNT is wrong, it should be 13 not 12. All the for loops that use this as a limit count are of the typical form, "for (n = 0; n < ADT7462_VOLT_COUNT; n++)", so to loop through all voltages w/o missing the last one it is necessary for the count to be one greater than it is. (Specifically, you will miss the +1.5V 3GPIO input with count = 12 vs. 13.) Signed-off-by: Ray Copeland Acked-by: "Darrick J. Wong" Signed-off-by: Jean Delvare Cc: stable@kernel.org --- drivers/hwmon/adt7462.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c index a31e77c776ae..b8156b4893bb 100644 --- a/drivers/hwmon/adt7462.c +++ b/drivers/hwmon/adt7462.c @@ -179,7 +179,7 @@ static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END }; * * Some, but not all, of these voltages have low/high limits. */ -#define ADT7462_VOLT_COUNT 12 +#define ADT7462_VOLT_COUNT 13 #define ADT7462_VENDOR 0x41 #define ADT7462_DEVICE 0x62 From 197027e6ef830d60e10f76efc8d12bf3b6c35db5 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 5 Feb 2010 19:58:36 +0100 Subject: [PATCH 1622/1626] hwmon: (lm78) Request I/O ports individually for probing Different motherboards have different PNP declarations for LM78/LM79 chips. Some declare the whole range of I/O ports (8 ports), some declare only the useful ports (2 ports at offset 5) and some declare fancy ranges, for example 4 ports at offset 4. To properly handle all cases, request all ports individually for probing. After we have determined that we really have an LM78 or LM79 chip, the useful port range will be requested again, as a single block. This fixes the driver on the Olivetti M3000 DT 540, at least. Signed-off-by: Jean Delvare Cc: stable@kernel.org --- drivers/hwmon/lm78.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index cadcbd90ff3b..72ff2c4e757d 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -851,17 +851,16 @@ static struct lm78_data *lm78_update_device(struct device *dev) static int __init lm78_isa_found(unsigned short address) { int val, save, found = 0; + int port; - /* We have to request the region in two parts because some - boards declare base+4 to base+7 as a PNP device */ - if (!request_region(address, 4, "lm78")) { - pr_debug("lm78: Failed to request low part of region\n"); - return 0; - } - if (!request_region(address + 4, 4, "lm78")) { - pr_debug("lm78: Failed to request high part of region\n"); - release_region(address, 4); - return 0; + /* Some boards declare base+0 to base+7 as a PNP device, some base+4 + * to base+7 and some base+5 to base+6. So we better request each port + * individually for the probing phase. */ + for (port = address; port < address + LM78_EXTENT; port++) { + if (!request_region(port, 1, "lm78")) { + pr_debug("lm78: Failed to request port 0x%x\n", port); + goto release; + } } #define REALLY_SLOW_IO @@ -925,8 +924,8 @@ static int __init lm78_isa_found(unsigned short address) val & 0x80 ? "LM79" : "LM78", (int)address); release: - release_region(address + 4, 4); - release_region(address, 4); + for (port--; port >= address; port--) + release_region(port, 1); return found; } From b0bcdd3cd0adb85a7686b396ba50493871b1135c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 5 Feb 2010 19:58:36 +0100 Subject: [PATCH 1623/1626] hwmon: (w83781d) Request I/O ports individually for probing Different motherboards have different PNP declarations for W83781D/W83782D chips. Some declare the whole range of I/O ports (8 ports), some declare only the useful ports (2 ports at offset 5) and some declare fancy ranges, for example 4 ports at offset 4. To properly handle all cases, request all ports individually for probing. After we have determined that we really have a W83781D or W83782D chip, the useful port range will be requested again, as a single block. I did not see a board which needs this yet, but I know of one for lm78 driver and I'd like to keep the logic of these two drivers in sync. Signed-off-by: Jean Delvare Cc: stable@kernel.org --- drivers/hwmon/w83781d.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 05f9225b6f94..32d4adee73db 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -1793,17 +1793,17 @@ static int __init w83781d_isa_found(unsigned short address) { int val, save, found = 0; + int port; - /* We have to request the region in two parts because some - boards declare base+4 to base+7 as a PNP device */ - if (!request_region(address, 4, "w83781d")) { - pr_debug("w83781d: Failed to request low part of region\n"); - return 0; - } - if (!request_region(address + 4, 4, "w83781d")) { - pr_debug("w83781d: Failed to request high part of region\n"); - release_region(address, 4); - return 0; + /* Some boards declare base+0 to base+7 as a PNP device, some base+4 + * to base+7 and some base+5 to base+6. So we better request each port + * individually for the probing phase. */ + for (port = address; port < address + W83781D_EXTENT; port++) { + if (!request_region(port, 1, "w83781d")) { + pr_debug("w83781d: Failed to request port 0x%x\n", + port); + goto release; + } } #define REALLY_SLOW_IO @@ -1877,8 +1877,8 @@ w83781d_isa_found(unsigned short address) val == 0x30 ? "W83782D" : "W83781D", (int)address); release: - release_region(address + 4, 4); - release_region(address, 4); + for (port--; port >= address; port--) + release_region(port, 1); return found; } From 6f5a55f1a6c5abee15a0e878e5c74d9f1569b8b0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 5 Feb 2010 16:16:50 -0800 Subject: [PATCH 1624/1626] Fix potential crash with sys_move_pages We incorrectly depended on the 'node_state/node_isset()' functions testing the node range, rather than checking it explicitly. That's not reliable, even if it might often happen to work. So do the proper explicit test. Reported-by: Marcus Meissner Acked-and-tested-by: Brice Goglin Acked-by: Hugh Dickins Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- mm/migrate.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/migrate.c b/mm/migrate.c index efddbf0926b2..9a0db5bbabe4 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -912,6 +912,9 @@ static int do_pages_move(struct mm_struct *mm, struct task_struct *task, goto out_pm; err = -ENODEV; + if (node < 0 || node >= MAX_NUMNODES) + goto out_pm; + if (!node_state(node, N_HIGH_MEMORY)) goto out_pm; From 29275254caedfedce960cfe6df24b90cb04fe431 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 6 Feb 2010 14:17:12 -0800 Subject: [PATCH 1625/1626] Linux 2.6.33-rc7 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 394aec712c7d..f8e02e9491d0 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 33 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* From 50200df462023b187d80a99a52f5f2cfe3c86c26 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 2 Feb 2010 14:46:13 -0800 Subject: [PATCH 1626/1626] kernel/sched.c: Suppress unused var warning On UP: kernel/sched.c: In function 'wake_up_new_task': kernel/sched.c:2631: warning: unused variable 'cpu' Signed-off-by: Andrew Morton Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 3a8fb30a91b1..e3199df426e3 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2647,7 +2647,7 @@ void wake_up_new_task(struct task_struct *p, unsigned long clone_flags) { unsigned long flags; struct rq *rq; - int cpu = get_cpu(); + int cpu __maybe_unused = get_cpu(); #ifdef CONFIG_SMP /*