S2io: Multiqueue network device support - FIFO selection based on L4 ports
- Resubmit #2 - Transmit fifo selection based on TCP/UDP ports. - Added tx_steering_type loadable parameter for transmit fifo selection. 0x0 NO_STEERING: Default FIFO is selected. 0x1 TX_PRIORITY_STEERING: FIFO is selected based on skb->priority. 0x2 TX_DEFAULT_STEERING: FIFO is selected based on L4 Ports. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Sreenivasa Honnur
Jeff Garzik
parent
3a3d5756ac
commit
6cfc482b4b
|
|
@ -458,7 +458,7 @@ MODULE_VERSION(DRV_VERSION);
|
|||
|
||||
|
||||
/* Module Loadable parameters. */
|
||||
S2IO_PARM_INT(tx_fifo_num, 1);
|
||||
S2IO_PARM_INT(tx_fifo_num, FIFO_DEFAULT_NUM);
|
||||
S2IO_PARM_INT(rx_ring_num, 1);
|
||||
S2IO_PARM_INT(multiq, 0);
|
||||
S2IO_PARM_INT(rx_ring_mode, 1);
|
||||
|
|
@ -470,6 +470,8 @@ S2IO_PARM_INT(shared_splits, 0);
|
|||
S2IO_PARM_INT(tmac_util_period, 5);
|
||||
S2IO_PARM_INT(rmac_util_period, 5);
|
||||
S2IO_PARM_INT(l3l4hdr_size, 128);
|
||||
/* 0 is no steering, 1 is Priority steering, 2 is Default steering */
|
||||
S2IO_PARM_INT(tx_steering_type, TX_DEFAULT_STEERING);
|
||||
/* Frequency of Rx desc syncs expressed as power of 2 */
|
||||
S2IO_PARM_INT(rxsync_frequency, 3);
|
||||
/* Interrupt type. Values can be 0(INTA), 2(MSI_X) */
|
||||
|
|
@ -4114,7 +4116,9 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
|
|||
struct fifo_info *fifo = NULL;
|
||||
struct mac_info *mac_control;
|
||||
struct config_param *config;
|
||||
int do_spin_lock = 1;
|
||||
int offload_type;
|
||||
int enable_per_list_interrupt = 0;
|
||||
struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
|
||||
|
||||
mac_control = &sp->mac_control;
|
||||
|
|
@ -4136,15 +4140,52 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
|
|||
}
|
||||
|
||||
queue = 0;
|
||||
/* Get Fifo number to Transmit based on vlan priority */
|
||||
if (sp->vlgrp && vlan_tx_tag_present(skb))
|
||||
vlan_tag = vlan_tx_tag_get(skb);
|
||||
if (sp->config.tx_steering_type == TX_DEFAULT_STEERING) {
|
||||
if (skb->protocol == htons(ETH_P_IP)) {
|
||||
struct iphdr *ip;
|
||||
struct tcphdr *th;
|
||||
ip = ip_hdr(skb);
|
||||
|
||||
/* get fifo number based on skb->priority value */
|
||||
queue = config->fifo_mapping[skb->priority & (MAX_TX_FIFOS - 1)];
|
||||
if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) {
|
||||
th = (struct tcphdr *)(((unsigned char *)ip) +
|
||||
ip->ihl*4);
|
||||
|
||||
if (ip->protocol == IPPROTO_TCP) {
|
||||
queue_len = sp->total_tcp_fifos;
|
||||
queue = (ntohs(th->source) +
|
||||
ntohs(th->dest)) &
|
||||
sp->fifo_selector[queue_len - 1];
|
||||
if (queue >= queue_len)
|
||||
queue = queue_len - 1;
|
||||
} else if (ip->protocol == IPPROTO_UDP) {
|
||||
queue_len = sp->total_udp_fifos;
|
||||
queue = (ntohs(th->source) +
|
||||
ntohs(th->dest)) &
|
||||
sp->fifo_selector[queue_len - 1];
|
||||
if (queue >= queue_len)
|
||||
queue = queue_len - 1;
|
||||
queue += sp->udp_fifo_idx;
|
||||
if (skb->len > 1024)
|
||||
enable_per_list_interrupt = 1;
|
||||
do_spin_lock = 0;
|
||||
}
|
||||
}
|
||||
}
|
||||
} else if (sp->config.tx_steering_type == TX_PRIORITY_STEERING)
|
||||
/* get fifo number based on skb->priority value */
|
||||
queue = config->fifo_mapping
|
||||
[skb->priority & (MAX_TX_FIFOS - 1)];
|
||||
fifo = &mac_control->fifos[queue];
|
||||
spin_lock_irqsave(&fifo->tx_lock, flags);
|
||||
|
||||
if (do_spin_lock)
|
||||
spin_lock_irqsave(&fifo->tx_lock, flags);
|
||||
else {
|
||||
if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags)))
|
||||
return NETDEV_TX_LOCKED;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_NETDEVICES_MULTIQUEUE
|
||||
if (sp->config.multiq) {
|
||||
if (__netif_subqueue_stopped(dev, fifo->fifo_no)) {
|
||||
|
|
@ -4188,7 +4229,9 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
|
|||
txdp->Control_1 |= TXD_GATHER_CODE_FIRST;
|
||||
txdp->Control_1 |= TXD_LIST_OWN_XENA;
|
||||
txdp->Control_2 |= TXD_INT_NUMBER(fifo->fifo_no);
|
||||
|
||||
if (enable_per_list_interrupt)
|
||||
if (put_off & (queue_len >> 5))
|
||||
txdp->Control_2 |= TXD_INT_TYPE_PER_LIST;
|
||||
if (vlan_tag) {
|
||||
txdp->Control_2 |= TXD_VLAN_ENABLE;
|
||||
txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
|
||||
|
|
@ -7622,13 +7665,15 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
|
|||
u8 *dev_multiq)
|
||||
{
|
||||
if ((tx_fifo_num > MAX_TX_FIFOS) ||
|
||||
(tx_fifo_num < FIFO_DEFAULT_NUM)) {
|
||||
(tx_fifo_num < 1)) {
|
||||
DBG_PRINT(ERR_DBG, "s2io: Requested number of tx fifos "
|
||||
"(%d) not supported\n", tx_fifo_num);
|
||||
tx_fifo_num =
|
||||
((tx_fifo_num > MAX_TX_FIFOS)? MAX_TX_FIFOS :
|
||||
((tx_fifo_num < FIFO_DEFAULT_NUM) ? FIFO_DEFAULT_NUM :
|
||||
tx_fifo_num));
|
||||
|
||||
if (tx_fifo_num < 1)
|
||||
tx_fifo_num = 1;
|
||||
else
|
||||
tx_fifo_num = MAX_TX_FIFOS;
|
||||
|
||||
DBG_PRINT(ERR_DBG, "s2io: Default to %d ", tx_fifo_num);
|
||||
DBG_PRINT(ERR_DBG, "tx fifos\n");
|
||||
}
|
||||
|
|
@ -7639,10 +7684,23 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
|
|||
multiq = 0;
|
||||
}
|
||||
#endif
|
||||
/* if multiqueue is enabled configure all fifos */
|
||||
if (multiq) {
|
||||
tx_fifo_num = MAX_TX_FIFOS;
|
||||
if (multiq)
|
||||
*dev_multiq = multiq;
|
||||
|
||||
if (tx_steering_type && (1 == tx_fifo_num)) {
|
||||
if (tx_steering_type != TX_DEFAULT_STEERING)
|
||||
DBG_PRINT(ERR_DBG,
|
||||
"s2io: Tx steering is not supported with "
|
||||
"one fifo. Disabling Tx steering.\n");
|
||||
tx_steering_type = NO_STEERING;
|
||||
}
|
||||
|
||||
if ((tx_steering_type < NO_STEERING) ||
|
||||
(tx_steering_type > TX_DEFAULT_STEERING)) {
|
||||
DBG_PRINT(ERR_DBG, "s2io: Requested transmit steering not "
|
||||
"supported\n");
|
||||
DBG_PRINT(ERR_DBG, "s2io: Disabling transmit steering\n");
|
||||
tx_steering_type = NO_STEERING;
|
||||
}
|
||||
|
||||
if ( rx_ring_num > 8) {
|
||||
|
|
@ -7773,7 +7831,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
|
|||
}
|
||||
#ifdef CONFIG_NETDEVICES_MULTIQUEUE
|
||||
if (dev_multiq)
|
||||
dev = alloc_etherdev_mq(sizeof(struct s2io_nic), MAX_TX_FIFOS);
|
||||
dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num);
|
||||
else
|
||||
#endif
|
||||
dev = alloc_etherdev(sizeof(struct s2io_nic));
|
||||
|
|
@ -7824,11 +7882,33 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
|
|||
config = &sp->config;
|
||||
|
||||
config->napi = napi;
|
||||
config->tx_steering_type = tx_steering_type;
|
||||
|
||||
/* Tx side parameters. */
|
||||
config->tx_fifo_num = tx_fifo_num;
|
||||
if (config->tx_steering_type == TX_PRIORITY_STEERING)
|
||||
config->tx_fifo_num = MAX_TX_FIFOS;
|
||||
else
|
||||
config->tx_fifo_num = tx_fifo_num;
|
||||
|
||||
/* Initialize the fifos used for tx steering */
|
||||
if (config->tx_fifo_num < 5) {
|
||||
if (config->tx_fifo_num == 1)
|
||||
sp->total_tcp_fifos = 1;
|
||||
else
|
||||
sp->total_tcp_fifos = config->tx_fifo_num - 1;
|
||||
sp->udp_fifo_idx = config->tx_fifo_num - 1;
|
||||
sp->total_udp_fifos = 1;
|
||||
sp->other_fifo_idx = sp->total_tcp_fifos - 1;
|
||||
} else {
|
||||
sp->total_tcp_fifos = (tx_fifo_num - FIFO_UDP_MAX_NUM -
|
||||
FIFO_OTHER_MAX_NUM);
|
||||
sp->udp_fifo_idx = sp->total_tcp_fifos;
|
||||
sp->total_udp_fifos = FIFO_UDP_MAX_NUM;
|
||||
sp->other_fifo_idx = sp->udp_fifo_idx + FIFO_UDP_MAX_NUM;
|
||||
}
|
||||
|
||||
config->multiq = dev_multiq;
|
||||
for (i = 0; i < MAX_TX_FIFOS; i++) {
|
||||
for (i = 0; i < config->tx_fifo_num; i++) {
|
||||
config->tx_cfg[i].fifo_len = tx_fifo_len[i];
|
||||
config->tx_cfg[i].fifo_priority = i;
|
||||
}
|
||||
|
|
@ -7837,6 +7917,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
|
|||
for (i = 0; i < MAX_TX_FIFOS; i++)
|
||||
config->fifo_mapping[i] = fifo_map[config->tx_fifo_num - 1][i];
|
||||
|
||||
/* map the hashing selector table to the configured fifos */
|
||||
for (i = 0; i < config->tx_fifo_num; i++)
|
||||
sp->fifo_selector[i] = fifo_selector[i];
|
||||
|
||||
|
||||
config->tx_intr_type = TXD_INT_TYPE_UTILZ;
|
||||
for (i = 0; i < config->tx_fifo_num; i++) {
|
||||
config->tx_cfg[i].f_no_snoop =
|
||||
|
|
@ -8113,6 +8198,20 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
|
|||
DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",
|
||||
dev->name);
|
||||
|
||||
switch (sp->config.tx_steering_type) {
|
||||
case NO_STEERING:
|
||||
DBG_PRINT(ERR_DBG, "%s: No steering enabled for"
|
||||
" transmit\n", dev->name);
|
||||
break;
|
||||
case TX_PRIORITY_STEERING:
|
||||
DBG_PRINT(ERR_DBG, "%s: Priority steering enabled for"
|
||||
" transmit\n", dev->name);
|
||||
break;
|
||||
case TX_DEFAULT_STEERING:
|
||||
DBG_PRINT(ERR_DBG, "%s: Default steering enabled for"
|
||||
" transmit\n", dev->name);
|
||||
}
|
||||
|
||||
if (sp->lro)
|
||||
DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
|
||||
dev->name);
|
||||
|
|
|
|||
|
|
@ -360,7 +360,10 @@ struct stat_block {
|
|||
#define MAX_TX_FIFOS 8
|
||||
#define MAX_RX_RINGS 8
|
||||
|
||||
#define FIFO_DEFAULT_NUM 1
|
||||
#define FIFO_DEFAULT_NUM 5
|
||||
#define FIFO_UDP_MAX_NUM 2 /* 0 - even, 1 -odd ports */
|
||||
#define FIFO_OTHER_MAX_NUM 1
|
||||
|
||||
|
||||
#define MAX_RX_DESC_1 (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 127 )
|
||||
#define MAX_RX_DESC_2 (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 85 )
|
||||
|
|
@ -379,6 +382,8 @@ static int fifo_map[][MAX_TX_FIFOS] = {
|
|||
{0, 1, 2, 3, 4, 5, 6, 7},
|
||||
};
|
||||
|
||||
static u16 fifo_selector[MAX_TX_FIFOS] = {0, 1, 3, 3, 7, 7, 7, 7};
|
||||
|
||||
/* Maintains Per FIFO related information. */
|
||||
struct tx_fifo_config {
|
||||
#define MAX_AVAILABLE_TXDS 8192
|
||||
|
|
@ -431,6 +436,12 @@ struct config_param {
|
|||
/* Tx Side */
|
||||
u32 tx_fifo_num; /*Number of Tx FIFOs */
|
||||
|
||||
/* 0-No steering, 1-Priority steering, 2-Default fifo map */
|
||||
#define NO_STEERING 0
|
||||
#define TX_PRIORITY_STEERING 0x1
|
||||
#define TX_DEFAULT_STEERING 0x2
|
||||
u8 tx_steering_type;
|
||||
|
||||
u8 fifo_mapping[MAX_TX_FIFOS];
|
||||
struct tx_fifo_config tx_cfg[MAX_TX_FIFOS]; /*Per-Tx FIFO config */
|
||||
u32 max_txds; /*Max no. of Tx buffer descriptor per TxDL */
|
||||
|
|
@ -895,6 +906,27 @@ struct s2io_nic {
|
|||
*/
|
||||
int rx_csum;
|
||||
|
||||
/* Below variables are used for fifo selection to transmit a packet */
|
||||
u16 fifo_selector[MAX_TX_FIFOS];
|
||||
|
||||
/* Total fifos for tcp packets */
|
||||
u8 total_tcp_fifos;
|
||||
|
||||
/*
|
||||
* Beginning index of udp for udp packets
|
||||
* Value will be equal to
|
||||
* (tx_fifo_num - FIFO_UDP_MAX_NUM - FIFO_OTHER_MAX_NUM)
|
||||
*/
|
||||
u8 udp_fifo_idx;
|
||||
|
||||
u8 total_udp_fifos;
|
||||
|
||||
/*
|
||||
* Beginning index of fifo for all other packets
|
||||
* Value will be equal to (tx_fifo_num - FIFO_OTHER_MAX_NUM)
|
||||
*/
|
||||
u8 other_fifo_idx;
|
||||
|
||||
/* after blink, the adapter must be restored with original
|
||||
* values.
|
||||
*/
|
||||
|
|
|
|||
Loading…
Reference in New Issue