From 6ccb5d7c62845788be9aafef26132333a07708bb Mon Sep 17 00:00:00 2001 From: "Justin P. Mattock" Date: Mon, 8 Nov 2010 13:41:46 -0800 Subject: [PATCH] staging: Fix typos in rt2860 Here is a patch that fixes some typos, and comments in drivers/staging/rt2860 Signed-off-by: Justin P. Mattock Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt2860/chip/mac_pci.h | 7 +-- drivers/staging/rt2860/chip/mac_usb.h | 5 +- drivers/staging/rt2860/chip/rtmp_mac.h | 19 +++---- drivers/staging/rt2860/chips/rt3090.c | 5 +- drivers/staging/rt2860/chips/rt30xx.c | 9 ++-- drivers/staging/rt2860/mlme.h | 41 +++++++-------- drivers/staging/rt2860/oid.h | 13 ++--- drivers/staging/rt2860/pci_main_dev.c | 17 ++++--- drivers/staging/rt2860/rt_linux.c | 12 ++--- drivers/staging/rt2860/rt_linux.h | 5 +- drivers/staging/rt2860/rt_main_dev.c | 9 ++-- drivers/staging/rt2860/rt_pci_rbus.c | 7 +-- drivers/staging/rt2860/rt_usb.c | 13 ++--- drivers/staging/rt2860/rtmp.h | 69 +++++++++++++------------- drivers/staging/rt2860/rtmp_def.h | 37 +++++++------- drivers/staging/rt2860/rtmp_timer.h | 13 ++--- drivers/staging/rt2860/spectrum.h | 12 ++--- drivers/staging/rt2860/sta/assoc.c | 13 ++--- drivers/staging/rt2860/sta/auth.c | 7 +-- drivers/staging/rt2860/sta/connect.c | 35 ++++++------- drivers/staging/rt2860/sta/rtmp_data.c | 33 ++++++------ drivers/staging/rt2860/sta/sanity.c | 5 +- drivers/staging/rt2860/sta/sync.c | 19 +++---- drivers/staging/rt2860/sta/wpa.c | 5 +- drivers/staging/rt2860/sta_ioctl.c | 25 +++++----- drivers/staging/rt2860/usb_main_dev.c | 8 +-- drivers/staging/rt2860/wpa.h | 5 +- 27 files changed, 236 insertions(+), 212 deletions(-) diff --git a/drivers/staging/rt2860/chip/mac_pci.h b/drivers/staging/rt2860/chip/mac_pci.h index 9f25ef047f59..b8868a5b9e04 100644 --- a/drivers/staging/rt2860/chip/mac_pci.h +++ b/drivers/staging/rt2860/chip/mac_pci.h @@ -30,7 +30,8 @@ Abstract: Revision History: - Who When What + Who When What + Justin P. Mattock 11/07/2010 Fix some typos --------- ---------- ---------------------------------------------- */ @@ -45,7 +46,7 @@ /* */ /* Device ID & Vendor ID related definitions, */ -/* NOTE: you should not add the new VendorID/DeviceID here unless you not sure it belongs to what chip. */ +/* NOTE: you should not add the new VendorID/DeviceID here unless you know for sure what chip it belongs too. */ /* */ #define NIC_PCI_VENDOR_ID 0x1814 #define PCIBUS_INTEL_VENDOR 0x8086 @@ -83,7 +84,7 @@ struct PACKED rt_txd { u32 SDPtr1; /*Word3 */ u32 rsv2:24; - u32 WIV:1; /* Wireless Info Valid. 1 if Driver already fill WI, o if DMA needs to copy WI to correctposition */ + u32 WIV:1; /* Wireless Info Valid. 1 if Driver already fill WI, o if DMA needs to copy WI to correct position */ u32 QSEL:2; /* select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA */ u32 rsv:2; u32 TCO:1; /* */ diff --git a/drivers/staging/rt2860/chip/mac_usb.h b/drivers/staging/rt2860/chip/mac_usb.h index ed0c0b43b05e..e8158fb58648 100644 --- a/drivers/staging/rt2860/chip/mac_usb.h +++ b/drivers/staging/rt2860/chip/mac_usb.h @@ -30,7 +30,8 @@ Abstract: Revision History: - Who When What + Who When What + Justin P. Mattock 11/07/2010 Fix a typo --------- ---------- ---------------------------------------------- */ @@ -93,7 +94,7 @@ struct rt_txinfo { /* Word 0 */ u32 USBDMATxPktLen:16; /*used ONLY in USB bulk Aggregation, Total byte counts of all sub-frame. */ u32 rsv:8; - u32 WIV:1; /* Wireless Info Valid. 1 if Driver already fill WI, o if DMA needs to copy WI to correctposition */ + u32 WIV:1; /* Wireless Info Valid. 1 if Driver already fill WI, o if DMA needs to copy WI to correct position */ u32 QSEL:2; /* select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA */ u32 SwUseLastRound:1; /* Software use. */ u32 rsv2:2; /* Software use. */ diff --git a/drivers/staging/rt2860/chip/rtmp_mac.h b/drivers/staging/rt2860/chip/rtmp_mac.h index e8f7172ce42a..3d1e4915b956 100644 --- a/drivers/staging/rt2860/chip/rtmp_mac.h +++ b/drivers/staging/rt2860/chip/rtmp_mac.h @@ -32,6 +32,7 @@ Revision History: Who When What + Justin P. Mattock 11/07/2010 Fix a comments, and typos -------- ---------- ---------------------------------------------- */ @@ -43,7 +44,7 @@ /* ================================================================================= */ /* the first 24-byte in TXD is called TXINFO and will be DMAed to MAC block through TXFIFO. */ -/* MAC block use this TXINFO to control the transmission behavior of this frame. */ +/* MAC block uses this TXINFO to control the transmission behavior of this frame. */ #define FIFO_MGMT 0 #define FIFO_HCCA 1 #define FIFO_EDCA 2 @@ -458,8 +459,8 @@ typedef union _BBP_CSR_CFG_STRUC { /* */ typedef union _RF_CSR_CFG0_STRUC { struct { - u32 RegIdAndContent:24; /* Register value to program into BBP */ - u32 bitwidth:5; /* Selected BBP register */ + u32 RegIdAndContent:24; /* Register value to program into BBP */ + u32 bitwidth:5; /* Selected BBP register */ u32 StandbyMode:1; /* 0: high when stand by 1: low when standby */ u32 Sel:1; /* 0:RF_LE0 activate 1:RF_LE1 activate */ u32 Busy:1; /* 0: idle 1: 8busy */ @@ -469,7 +470,7 @@ typedef union _RF_CSR_CFG0_STRUC { #define RF_CSR_CFG1 0x1024 typedef union _RF_CSR_CFG1_STRUC { struct { - u32 RegIdAndContent:24; /* Register value to program into BBP */ + u32 RegIdAndContent:24; /* Register value to program into BBP */ u32 RFGap:5; /* Gap between BB_CONTROL_RF and RF_LE. 0: 3 system clock cycle (37.5usec) 1: 5 system clock cycle (62.5usec) */ u32 rsv:7; /* 0: idle 1: 8busy */ } field; @@ -478,7 +479,7 @@ typedef union _RF_CSR_CFG1_STRUC { #define RF_CSR_CFG2 0x1028 /* */ typedef union _RF_CSR_CFG2_STRUC { struct { - u32 RegIdAndContent:24; /* Register value to program into BBP */ + u32 RegIdAndContent:24; /* Register value to program into BBP */ u32 rsv:8; /* 0: idle 1: 8busy */ } field; u32 word; @@ -490,7 +491,7 @@ typedef union _LED_CFG_STRUC { u32 OffPeriod:8; /* blinking off period unit 1ms */ u32 SlowBlinkPeriod:6; /* slow blinking period. unit:1ms */ u32 rsv:2; - u32 RLedMode:2; /* red Led Mode 0: off1: blinking upon TX2: periodic slow blinking3: always on */ + u32 RLedMode:2; /* red Led Mode 0: off1: blinking upon TX2: periodic slow blinking3: always on */ u32 GLedMode:2; /* green Led Mode */ u32 YLedMode:2; /* yellow Led Mode */ u32 LedPolar:1; /* Led Polarity. 0: active low1: active high */ @@ -621,9 +622,9 @@ typedef union _TX_TIMEOUT_CFG_STRUC { #define TX_RTY_CFG 0x134c typedef union PACKED _TX_RTY_CFG_STRUC { struct { - u32 ShortRtyLimit:8; /* short retry limit */ - u32 LongRtyLimit:8; /*long retry limit */ - u32 LongRtyThre:12; /* Long retry threshoold */ + u32 ShortRtyLimit:8; /* short retry limit */ + u32 LongRtyLimit:8; /* long retry limit */ + u32 LongRtyThre:12; /* Long retry threshold */ u32 NonAggRtyMode:1; /* Non-Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer */ u32 AggRtyMode:1; /* Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer */ u32 TxautoFBEnable:1; /* Tx retry PHY rate auto fallback enable */ diff --git a/drivers/staging/rt2860/chips/rt3090.c b/drivers/staging/rt2860/chips/rt3090.c index c2933c69bc04..156eb36e56f2 100644 --- a/drivers/staging/rt2860/chips/rt3090.c +++ b/drivers/staging/rt2860/chips/rt3090.c @@ -28,10 +28,11 @@ rt3090.c Abstract: - Specific funcitons and variables for RT3070 + Specific functions and variables for RT3070 Revision History: - Who When What + Who When What + Justin P. Mattock 11/07/2010 Fix a typo -------- ---------- ---------------------------------------------- */ diff --git a/drivers/staging/rt2860/chips/rt30xx.c b/drivers/staging/rt2860/chips/rt30xx.c index 4367a196aeff..c8f728257197 100644 --- a/drivers/staging/rt2860/chips/rt30xx.c +++ b/drivers/staging/rt2860/chips/rt30xx.c @@ -28,10 +28,11 @@ rt30xx.c Abstract: - Specific funcitons and variables for RT30xx. + Specific functions and variables for RT30xx. Revision History: - Who When What + Who When What + Justin P. Mattock 11/07/2010 Fix some typos -------- ---------- ---------------------------------------------- */ @@ -89,7 +90,7 @@ struct rt_reg_pair RT30xx_RFRegTable[] = { u8 NUM_RF_REG_PARMS = (sizeof(RT30xx_RFRegTable) / sizeof(struct rt_reg_pair)); -/* Antenna divesity use GPIO3 and EESK pin for control */ +/* Antenna diversity use GPIO3 and EESK pin for control */ /* Antenna and EEPROM access are both using EESK pin, */ /* Therefor we should avoid accessing EESK at the same time */ /* Then restore antenna after EEPROM access */ @@ -243,7 +244,7 @@ void RTMPFilterCalibration(struct rt_rtmp_adapter *pAd) break; } - /* prevent infinite loop cause driver hang. */ + /* prevent infinite loop; causes driver hang. */ if (loopcnt++ > 100) { DBGPRINT(RT_DEBUG_ERROR, ("RTMPFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", diff --git a/drivers/staging/rt2860/mlme.h b/drivers/staging/rt2860/mlme.h index 01414c3b4889..cd1ee3d7a91d 100644 --- a/drivers/staging/rt2860/mlme.h +++ b/drivers/staging/rt2860/mlme.h @@ -32,8 +32,9 @@ Revision History: Who When What -------- ---------- ------------------------------ - John Chang 2003-08-28 Created - John Chang 2004-09-06 modified for RT2600 + John Chang 2003-08-28 Created + John Chang 2004-09-06 modified for RT2600 + Justin P. Mattock 11/07/2010 Fix typos in comments */ #ifndef __MLME_H__ @@ -41,7 +42,7 @@ #include "rtmp_dot11.h" -/* maximum supported capability information - */ +/* maximum supported capability information */ /* ESS, IBSS, Privacy, Short Preamble, Spectrum mgmt, Short Slot */ #define SUPPORTED_CAPABILITY_INFO 0x0533 @@ -77,7 +78,7 @@ #define CW_MAX_IN_BITS 10 /* actual CwMax = 2^CW_MAX_IN_BITS - 1 */ /* Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720). */ -/* SHould not refer to this constant anymore */ +/* Should not refer to this constant anymore */ /*#define RSSI_TO_DBM_OFFSET 120 // for RT2530 RSSI-115 = dBm */ #define RSSI_FOR_MID_TX_POWER -55 /* -55 db is considered mid-distance */ #define RSSI_FOR_LOW_TX_POWER -45 /* -45 db is considered very short distance and */ @@ -123,7 +124,7 @@ #define TID_MAC_HASH_INDEX(Addr, TID) (TID_MAC_HASH(Addr, TID) % HASH_TABLE_SIZE) /* LED Control */ -/* assoiation ON. one LED ON. another blinking when TX, OFF when idle */ +/* association ON. one LED ON. another blinking when TX, OFF when idle */ /* no association, both LED off */ #define ASIC_LED_ACT_ON(pAd) RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00031e46) #define ASIC_LED_ACT_OFF(pAd) RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00001e46) @@ -284,8 +285,8 @@ struct PACKED rt_ht_capability_ie { /* 802.11n draft3 related structure definitions. */ /* 7.3.2.60 */ -#define dot11OBSSScanPassiveDwell 20 /* in TU. min amount of time that the STA continously scans each channel when performing an active OBSS scan. */ -#define dot11OBSSScanActiveDwell 10 /* in TU.min amount of time that the STA continously scans each channel when performing an passive OBSS scan. */ +#define dot11OBSSScanPassiveDwell 20 /* in TU. min amount of time that the STA continuously scans each channel when performing an active OBSS scan. */ +#define dot11OBSSScanActiveDwell 10 /* in TU.min amount of time that the STA continuously scans each channel when performing an passive OBSS scan. */ #define dot11BSSWidthTriggerScanInterval 300 /* in sec. max interval between scan operations to be performed to detect BSS channel width trigger events. */ #define dot11OBSSScanPassiveTotalPerChannel 200 /* in TU. min total amount of time that the STA scans each channel when performing a passive OBSS scan. */ #define dot11OBSSScanActiveTotalPerChannel 20 /*in TU. min total amount of time that the STA scans each channel when performing a active OBSS scan */ @@ -325,7 +326,7 @@ struct rt_trigger_eventa { }; /* 20/40 trigger event table */ -/* If one Event A delete or created, or if Event B is detected or not detected, STA should send 2040BSSCoexistence to AP. */ +/* If one Event (A) is deleted or created, or if Event (B) is detected or not detected, STA should send 2040BSSCoexistence to AP. */ #define MAX_TRIGGER_EVENT 64 struct rt_trigger_event_tab { u8 EventANo; @@ -357,14 +358,14 @@ struct PACKED rt_bss_2040_intolerant_ch_report { u8 ChList[0]; }; -/* The structure for channel switch annoucement IE. This is in 802.11n D3.03 */ +/* The structure for channel switch announcement IE. This is in 802.11n D3.03 */ struct PACKED rt_cha_switch_announce_ie { u8 SwitchMode; /*channel switch mode */ u8 NewChannel; /* */ u8 SwitchCount; /* */ }; -/* The structure for channel switch annoucement IE. This is in 802.11n D3.03 */ +/* The structure for channel switch announcement IE. This is in 802.11n D3.03 */ struct PACKED rt_sec_cha_offset_ie { u8 SecondaryChannelOffset; /* 1: Secondary above, 3: Secondary below, 0: no Secondary */ }; @@ -377,7 +378,7 @@ struct rt_ht_phy_info { u8 MCSSet[16]; }; -/*This structure substracts ralink supports from all 802.11n-related features. */ +/*This structure subtracts ralink supports from all 802.11n-related features. */ /*Features not listed here but contained in 802.11n spec are not supported in rt2860. */ struct rt_ht_capability { u16 ChannelWidth:1; @@ -387,14 +388,14 @@ struct rt_ht_capability { u16 ShortGIfor40:1; /*for40MHz */ u16 TxSTBC:1; u16 RxSTBC:2; /* 2 bits */ - u16 AmsduEnable:1; /* Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n */ + u16 AmsduEnable:1; /* Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benefit of 802.11n */ u16 AmsduSize:1; /* Max receiving A-MSDU size */ u16 rsv:5; /*Substract from Addiont HT INFO IE */ u8 MaxRAmpduFactor:2; u8 MpduDensity:3; - u8 ExtChanOffset:2; /* Please not the difference with following u8 NewExtChannelOffset; from 802.11n */ + u8 ExtChanOffset:2; /* Please note the difference with following u8 NewExtChannelOffset; from 802.11n */ u8 RecomWidth:1; u16 OperaionMode:2; @@ -481,7 +482,7 @@ struct PACKED rt_ba_parm { u16 AMSDUSupported:1; /* 0: not permitted 1: permitted */ u16 BAPolicy:1; /* 1: immediately BA 0:delayed BA */ u16 TID:4; /* value of TC os TS */ - u16 BufSize:10; /* number of buffe of size 2304 octetsr */ + u16 BufSize:10; /* number of buffer of size 2304 octetsr */ }; /* 2-byte BA Starting Seq CONTROL field */ @@ -551,7 +552,7 @@ struct PACKED rt_frame_mtba_req { BASEQ_CONTROL BAStartingSeq; }; -/* Compressed format is mandantory in HT STA */ +/* Compressed format is mandatory in HT STA */ struct PACKED rt_frame_mtba { struct rt_frame_control FC; u16 Duration; @@ -647,7 +648,7 @@ struct PACKED rt_frame_ba { u8 bitmask[8]; }; -/* Radio Measuement Request Frame Format */ +/* Radio Measurement Request Frame Format */ struct PACKED rt_frame_rm_req_action { struct rt_header_802_11 Hdr; u8 Category; @@ -709,7 +710,7 @@ struct rt_edca_parm { u8 Cwmin[4]; u8 Cwmax[4]; u16 Txop[4]; /* in unit of 32-us */ - BOOLEAN bACM[4]; /* 1: Admission Control of AC_BK is mandattory */ + BOOLEAN bACM[4]; /* 1: Admission Control of AC_BK is mandatory */ }; /* QBSS LOAD information from QAP's BEACON/ProbeRsp */ @@ -757,7 +758,7 @@ struct rt_wpa_ie { struct rt_bss_entry { u8 Bssid[MAC_ADDR_LEN]; u8 Channel; - u8 CentralChannel; /*Store the wide-band central channel for 40MHz. .used in 40MHz AP. Or this is the same as Channel. */ + u8 CentralChannel; /*Store the wide-band central channel for 40MHz. used in 40MHz AP. Or this is the same as Channel. */ u8 BssType; u16 AtimWin; u16 BeaconPeriod; @@ -855,7 +856,7 @@ struct rt_state_machine { STATE_MACHINE_FUNC *TransFunc; }; -/* MLME AUX data structure that hold temporarliy settings during a connection attempt. */ +/* MLME AUX data structure that holds temporarliy settings during a connection attempt. */ /* Once this attemp succeeds, all settings will be copy to pAd->StaActive. */ /* A connection attempt (user set OID, roaming, CCX fast roaming,..) consists of */ /* several steps (JOIN, AUTH, ASSOC or REASSOC) and may fail at any step. We purposely */ @@ -996,7 +997,7 @@ struct PACKED rt_rtmp_tx_rate_switch { #define MAC_TABLE_ASSOC_TIMEOUT 5 /* unit: sec */ #define MAC_TABLE_FULL(Tab) ((Tab).size == MAX_LEN_OF_MAC_TABLE) -/* AP shall drop the sta if contine Tx fail count reach it. */ +/* AP shall drop the sta if continue Tx fail count reach it. */ #define MAC_ENTRY_LIFE_CHECK_CNT 20 /* packet cnt. */ /* Value domain of pMacEntry->Sst */ diff --git a/drivers/staging/rt2860/oid.h b/drivers/staging/rt2860/oid.h index 1704c27b2736..eaa3fe005088 100644 --- a/drivers/staging/rt2860/oid.h +++ b/drivers/staging/rt2860/oid.h @@ -32,7 +32,8 @@ Revision History: Who When What -------- ---------- ---------------------------------------------- - Name Date Modification logs + Name Date Modification logs + Justin P. Mattock 11/07/2010 Fix typos in comments */ #ifndef _OID_H_ #define _OID_H_ @@ -78,7 +79,7 @@ #define NDIS_802_11_LENGTH_RATES 8 #define NDIS_802_11_LENGTH_RATES_EX 16 #define MAC_ADDR_LENGTH 6 -/*#define MAX_NUM_OF_CHS 49 // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL terminationc */ +/*#define MAX_NUM_OF_CHS 49 // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination */ #define MAX_NUM_OF_CHS 54 /* 14 channels @2.4G + 12@UNII(lower/middle) + 16@HiperLAN2 + 11@UNII(upper) + 0 @Japan + 1 as NULL termination */ #define MAX_NUMBER_OF_EVENT 10 /* entry # in EVENT table */ #define MAX_NUMBER_OF_MAC 32 /* if MAX_MBSSID_NUM is 8, this value can't be larger than 211 */ @@ -610,7 +611,7 @@ struct rt_802_11_event_log { struct rt_802_11_event_table { unsigned long Num; - unsigned long Rsv; /* to align Log[] at LARGE_INEGER boundary */ + unsigned long Rsv; /* to align Log[] at LARGE_INTEGER boundary */ struct rt_802_11_event_log Log[MAX_NUMBER_OF_EVENT]; }; @@ -721,9 +722,9 @@ struct rt_802_11_tx_rates { #define AUTH_FAIL 0x4 /* Open authentication fail */ #define AUTH_FAIL_KEYS 0x5 /* Shared authentication fail */ #define ASSOC_FAIL 0x6 /* Association failed */ -#define EAP_MIC_FAILURE 0x7 /* Deauthencation because MIC failure */ -#define EAP_4WAY_TIMEOUT 0x8 /* Deauthencation on 4-way handshake timeout */ -#define EAP_GROUP_KEY_TIMEOUT 0x9 /* Deauthencation on group key handshake timeout */ +#define EAP_MIC_FAILURE 0x7 /* Deauthentication because MIC failure */ +#define EAP_4WAY_TIMEOUT 0x8 /* Deauthentication on 4-way handshake timeout */ +#define EAP_GROUP_KEY_TIMEOUT 0x9 /* Deauthentication on group key handshake timeout */ #define EAP_SUCCESS 0xa /* EAP succeed */ #define DETECT_RADAR_SIGNAL 0xb /* Radar signal occur in current channel */ #define EXTRA_INFO_MAX 0xb /* Indicate Last OID */ diff --git a/drivers/staging/rt2860/pci_main_dev.c b/drivers/staging/rt2860/pci_main_dev.c index 321facd6b0ab..c35c804a083e 100644 --- a/drivers/staging/rt2860/pci_main_dev.c +++ b/drivers/staging/rt2860/pci_main_dev.c @@ -31,7 +31,8 @@ Create and register network interface for PCI based chipsets in Linux platform. Revision History: - Who When What + Who When What + Justin P. Mattock 11/07/2010 Fix typos in some comments -------- ---------- ---------------------------------------------- */ @@ -40,8 +41,8 @@ #include /* Following information will be show when you run 'modinfo' */ -/* *** If you have a solution for the bug in current version of driver, please mail to me. */ -/* Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. *** */ +/* If you have a solution for a bug in current version of driver, please e-mail me. */ +/* Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. */ MODULE_AUTHOR("Jett Chen "); MODULE_DESCRIPTION("RT2860/RT3090 Wireless Lan Linux Driver"); MODULE_LICENSE("GPL"); @@ -599,7 +600,7 @@ void RTMPInitPCIeLinkCtrlValue(struct rt_rtmp_adapter *pAd) DBGPRINT_RAW(RT_DEBUG_ERROR, (" AUX_CTRL = 0x%32x\n", MacValue)); - /* for RT30xx F and after, PCIe infterface, and for power solution 3 */ + /* for RT30xx F and after, PCIe interface, and for power solution 3 */ if ((IS_VERSION_AFTER_F(pAd)) && (pAd->StaCfg.PSControl.field.rt30xxPowerMode >= 2) && (pAd->StaCfg.PSControl.field.rt30xxPowerMode <= 3)) { @@ -902,7 +903,7 @@ void RTMPPCIeLinkCtrlValueRestore(struct rt_rtmp_adapter *pAd, u8 Level) Configuration); if ((Configuration != 0) && (Configuration != 0xFFFF)) { Configuration &= 0xfefc; - /* If call from interface down, restore to orginial setting. */ + /* If call from interface down, restore to original setting. */ if (Level == RESTORE_CLOSE) Configuration |= pAd->HostLnkCtrlConfiguration; else @@ -924,7 +925,7 @@ void RTMPPCIeLinkCtrlValueRestore(struct rt_rtmp_adapter *pAd, u8 Level) Configuration); if ((Configuration != 0) && (Configuration != 0xFFFF)) { Configuration &= 0xfefc; - /* If call from interface down, restore to orginial setting. */ + /* If call from interface down, restore to original setting. */ if (Level == RESTORE_CLOSE) Configuration |= pAd->RLnkCtrlConfiguration; else @@ -1106,12 +1107,12 @@ void RTMPrt3xSetPCIePowerLinkCtrl(struct rt_rtmp_adapter *pAd) if (pos != 0) pAd->HostLnkCtrlOffset = pos + PCI_EXP_LNKCTL; - /* If configurared to turn on L1. */ + /* If configured to turn on L1. */ HostConfiguration = 0; if (pAd->StaCfg.PSControl.field.rt30xxForceASPMTest == 1) { DBGPRINT(RT_DEBUG_TRACE, ("Enter,PSM : Force ASPM\n")); - /* Skip non-exist deice right away */ + /* Skip non-exist device right away */ if ((pAd->HostLnkCtrlOffset != 0)) { PCI_REG_READ_WORD(pObj->parent_pci_dev, pAd->HostLnkCtrlOffset, diff --git a/drivers/staging/rt2860/rt_linux.c b/drivers/staging/rt2860/rt_linux.c index abfeea11721d..e680b0d97f74 100644 --- a/drivers/staging/rt2860/rt_linux.c +++ b/drivers/staging/rt2860/rt_linux.c @@ -767,13 +767,13 @@ void send_monitor_packets(struct rt_rtmp_adapter *pAd, struct rt_rx_blk *pRxBlk) /* QOS */ if (pRxBlk->pHeader->FC.SubType & 0x08) { header_len += 2; - /* Data skip QOS contorl field */ + /* Data skip QOS control field */ pRxBlk->DataSize -= 2; } /* Order bit: A-Ralink or HTC+ */ if (pRxBlk->pHeader->FC.Order) { header_len += 4; - /* Data skip HTC contorl field */ + /* Data skip HTC control field */ pRxBlk->DataSize -= 4; } /* Copy Header */ @@ -1175,7 +1175,7 @@ int RtmpOSNetDevAddrSet(struct net_device *pNetDev, u8 *pMacAddr) net_dev = pNetDev; GET_PAD_FROM_NET_DEV(pAd, net_dev); - /* work-around for the SuSE due to it has it's own interface name management system. */ + /* work-around for SuSE, due to them having their own interface name management system. */ { NdisZeroMemory(pAd->StaCfg.dev_name, 16); NdisMoveMemory(pAd->StaCfg.dev_name, net_dev->name, @@ -1300,7 +1300,7 @@ int RtmpOSNetDevAttach(struct net_device *pNetDev, int ret, rtnl_locked = FALSE; DBGPRINT(RT_DEBUG_TRACE, ("RtmpOSNetDevAttach()--->\n")); - /* If we need hook some callback function to the net device structrue, now do it. */ + /* If we need hook some callback function to the net device structure, now do it. */ if (pDevOpHook) { struct rt_rtmp_adapter *pAd = NULL; @@ -1351,10 +1351,10 @@ struct net_device *RtmpOSNetDevCreate(struct rt_rtmp_adapter *pAd, return NULL; } - /* find a available interface name, max 32 interfaces */ + /* find an available interface name, max 32 interfaces */ status = RtmpOSNetDevRequestName(pAd, pNetDev, pNamePrefix, devNum); if (status != NDIS_STATUS_SUCCESS) { - /* error! no any available ra name can be used! */ + /* error! no available ra name can be used! */ DBGPRINT(RT_DEBUG_ERROR, ("Assign interface name (%s with suffix 0~32) failed...\n", pNamePrefix)); diff --git a/drivers/staging/rt2860/rt_linux.h b/drivers/staging/rt2860/rt_linux.h index 5acedf18b1ab..a449b0bb85f1 100644 --- a/drivers/staging/rt2860/rt_linux.h +++ b/drivers/staging/rt2860/rt_linux.h @@ -30,7 +30,8 @@ Abstract: Revision History: - Who When What + Who When What + Justin P. Mattock 11/07/2010 Fix typo in a comment --------- ---------- ---------------------------------------------- */ @@ -726,7 +727,7 @@ void linux_pci_unmap_single(struct rt_rtmp_adapter *pAd, dma_addr_t dma_addr, #define RTMP_GET_PACKET_MOREDATA(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7]) /* */ -/* Sepcific Pakcet Type definition */ +/* Specific Packet Type definition */ /* */ #define RTMP_PACKET_SPECIFIC_CB_OFFSET 11 diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c index ad60ceaf4b88..19e9bc6569f8 100644 --- a/drivers/staging/rt2860/rt_main_dev.c +++ b/drivers/staging/rt2860/rt_main_dev.c @@ -31,7 +31,8 @@ Create and register network interface. Revision History: - Who When What + Who When What + Justin P. Mattock 11/07/2010 Fix typos in comments -------- ---------- ---------------------------------------------- */ @@ -234,7 +235,7 @@ int rt28xx_close(struct net_device *dev) RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_CLOSE); #endif /* RTMP_MAC_PCI // */ - /* If dirver doesn't wake up firmware here, */ + /* If driver doesn't wake up firmware here, */ /* NICLoadFirmware will hang forever when interface is up again. */ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) { AsicForceWakeup(pAd, TRUE); @@ -310,8 +311,8 @@ int rt28xx_close(struct net_device *dev) RTMP_ASIC_INTERRUPT_DISABLE(pAd); } /* Receive packets to clear DMA index after disable interrupt. */ - /*RTMPHandleRxDoneInterrupt(pAd); */ - /* put to radio off to save power when driver unload. After radiooff, can't write /read register. So need to finish all */ + /* RTMPHandleRxDoneInterrupt(pAd); */ + /* put radio off to save power when driver unloads. After radiooff, can't write/read register, so need to finish all. */ /* register access before Radio off. */ brc = RT28xxPciAsicRadioOff(pAd, RTMP_HALT, 0); diff --git a/drivers/staging/rt2860/rt_pci_rbus.c b/drivers/staging/rt2860/rt_pci_rbus.c index 3004be6da003..e5fb67cd9a68 100644 --- a/drivers/staging/rt2860/rt_pci_rbus.c +++ b/drivers/staging/rt2860/rt_pci_rbus.c @@ -31,7 +31,8 @@ Create and register network interface. Revision History: - Who When What + Who When What + Justin P. Mattock 11/07/2010 Fix a typo -------- ---------- ---------------------------------------------- */ @@ -356,7 +357,7 @@ static void mgmt_dma_done_tasklet(unsigned long data) RTMPHandleMgmtRingDmaDoneInterrupt(pAd); - /* if you use RTMP_SEM_LOCK, sometimes kernel will hang up, no any */ + /* if you use RTMP_SEM_LOCK, sometimes kernel will hang up, without any */ /* bug report output */ RTMP_INT_LOCK(&pAd->irq_lock, flags); /* @@ -787,7 +788,7 @@ IRQ_HANDLE_TYPE rt2860_interrupt(int irq, void *dev_instance) } /* - * invaild or writeback cache + * invalid or writeback cache * and convert virtual address to physical address */ dma_addr_t linux_pci_map_single(struct rt_rtmp_adapter *pAd, void *ptr, diff --git a/drivers/staging/rt2860/rt_usb.c b/drivers/staging/rt2860/rt_usb.c index bcfc0f54d2aa..580a20dd6e9d 100644 --- a/drivers/staging/rt2860/rt_usb.c +++ b/drivers/staging/rt2860/rt_usb.c @@ -32,7 +32,8 @@ Revision History: Who When What -------- ---------- ---------------------------------------------- - Name Date Modification logs + Name Date Modification logs + Justin P. Mattock 11/07/2010 Fix some typos. */ @@ -279,7 +280,7 @@ static void rtusb_dataout_complete(unsigned long data) && !RTUSB_TEST_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_FRAG << BulkOutPipeId))) { - /* Indicate There is data avaliable */ + /* Indicate There is data available */ RTUSB_SET_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << BulkOutPipeId)); @@ -335,7 +336,7 @@ static void rtusb_null_frame_done_tasklet(unsigned long data) } /* Always call Bulk routine, even reset bulk. */ - /* The protectioon of rest bulk should be in BulkOut routine */ + /* The protection of rest bulk should be in BulkOut routine */ RTUSBKickBulkOut(pAd); } @@ -383,7 +384,7 @@ static void rtusb_rts_frame_done_tasklet(unsigned long data) RTMP_SEM_UNLOCK(&pAd->BulkOutLock[pRTSContext->BulkOutPipeId]); /* Always call Bulk routine, even reset bulk. */ - /* The protectioon of rest bulk should be in BulkOut routine */ + /* The protection of rest bulk should be in BulkOut routine */ RTUSBKickBulkOut(pAd); } @@ -427,7 +428,7 @@ static void rtusb_pspoll_frame_done_tasklet(unsigned long data) RTMP_SEM_UNLOCK(&pAd->BulkOutLock[0]); /* Always call Bulk routine, even reset bulk. */ - /* The protectioon of rest bulk should be in BulkOut routine */ + /* The protection of rest bulk should be in BulkOut routine */ RTUSBKickBulkOut(pAd); } @@ -575,7 +576,7 @@ static void rtusb_mgmt_dma_done_tasklet(unsigned long data) } else { /* Always call Bulk routine, even reset bulk. */ - /* The protectioon of rest bulk should be in BulkOut routine */ + /* The protection of rest bulk should be in BulkOut routine */ if (pAd->MgmtRing.TxSwFreeIdx < MGMT_RING_SIZE /* pMLMEContext->bWaitingBulkOut == TRUE */) { diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h index ca54e53b6603..caf466242a13 100644 --- a/drivers/staging/rt2860/rtmp.h +++ b/drivers/staging/rt2860/rtmp.h @@ -31,11 +31,12 @@ Miniport generic portion header file Revision History: - Who When What + Who When What -------- ---------- ---------------------------------------------- - Paul Lin 2002-08-01 created - James Tan 2002-09-06 modified (Revise NTCRegTable) - John Chang 2004-09-06 modified for RT2600 + Paul Lin 2002-08-01 created + James Tan 2002-09-06 modified (Revise NTCRegTable) + John Chang 2004-09-06 modified for RT2600 + Justin P. Mattock 11/07/2010 Fix some typos */ #ifndef __RTMP_H__ #define __RTMP_H__ @@ -337,7 +338,7 @@ struct rt_rtmp_sg_list { #define LEAP_ON(_p) (((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP) #define LEAP_CCKM_ON(_p) ((((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP) && ((_p)->StaCfg.LeapAuthInfo.CCKM == TRUE)) -/* if orginal Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required */ +/* if original Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required */ #define EXTRA_LLCSNAP_ENCAP_FROM_PKT_START(_pBufVA, _pExtraLlcSnapEncap) \ { \ if (((*(_pBufVA + 12) << 8) + *(_pBufVA + 13)) > 1500) { \ @@ -466,7 +467,7 @@ struct rt_rtmp_dmabuf { /* Control block (Descriptor) for all ring descriptor DMA operation, buffer must be */ /* contiguous physical memory. char stored the binding Rx packet descriptor */ /* which won't be released, driver has to wait until upper layer return the packet */ -/* before giveing up this rx ring descriptor to ASIC. NDIS_BUFFER is assocaited pair */ +/* before giving up this rx ring descriptor to ASIC. NDIS_BUFFER is associated pair */ /* to describe the packet buffer. For Tx, char stored the tx packet descriptor */ /* which driver should ACK upper layer when the tx is physically done or failed. */ /* */ @@ -602,7 +603,7 @@ struct rt_counter_ralink { }; struct rt_counter_drs { - /* to record the each TX rate's quality. 0 is best, the bigger the worse. */ + /* record each TX rate's quality. 0 is best, the bigger the worse. */ u16 TxQuality[MAX_STEP_OF_TX_RATE_SWITCH]; u8 PER[MAX_STEP_OF_TX_RATE_SWITCH]; u8 TxRateUpPenalty; /* extra # of second penalty due to last unstable condition */ @@ -719,7 +720,7 @@ struct rt_fragment_frame { /* Packet information for NdisQueryPacket */ /* */ struct rt_packet_info { - u32 PhysicalBufferCount; /* Physical breaks of buffer descripor chained */ + u32 PhysicalBufferCount; /* Physical breaks of buffer descriptor chained */ u32 BufferCount; /* Number of Buffer descriptor chained */ u32 TotalPacketLength; /* Self explained */ char *pFirstBuffer; /* Pointer to first buffer descriptor */ @@ -846,8 +847,8 @@ typedef enum _ABGBAND_STATE_ { /* Power save method control */ typedef union _PS_CONTROL { struct { - unsigned long EnablePSinIdle:1; /* Enable radio off when not connect to AP. radio on only when sitesurvey, */ - unsigned long EnableNewPS:1; /* Enable new Chip power save fucntion . New method can only be applied in chip version after 2872. and PCIe. */ + unsigned long EnablePSinIdle:1; /* Enable radio off when not connected to AP. radio on only when sitesurvey, */ + unsigned long EnableNewPS:1; /* Enable new Chip power save function . New method can only be applied in chip version after 2872. and PCIe. */ unsigned long rt30xxPowerMode:2; /* Power Level Mode for rt30xx chip */ unsigned long rt30xxFollowHostASPM:1; /* Card Follows Host's setting for rt30xx chip. */ unsigned long rt30xxForceASPMTest:1; /* Force enable L1 for rt30xx chip. This has higher priority than rt30xxFollowHostASPM Mode. */ @@ -1117,8 +1118,8 @@ struct rt_beacon_sync { unsigned long TimIELocationInBeacon[HW_BEACON_MAX_COUNT]; unsigned long CapabilityInfoLocationInBeacon[HW_BEACON_MAX_COUNT]; BOOLEAN EnableBeacon; /* trigger to enable beacon transmission. */ - u8 BeaconBitMap; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */ - u8 DtimBitOn; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */ + u8 BeaconBitMap; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter needs to change. */ + u8 DtimBitOn; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter needs to change. */ }; #endif /* RTMP_MAC_USB // */ @@ -1211,7 +1212,7 @@ struct rt_common_config { /*BOOLEAN bAutoTxRateSwitch; */ u8 MinTxRate; /* RATE_1, RATE_2, RATE_5_5, RATE_11 */ u8 RtsRate; /* RATE_xxx */ - HTTRANSMIT_SETTING MlmeTransmit; /* MGMT frame PHY rate setting when operatin at Ht rate. */ + HTTRANSMIT_SETTING MlmeTransmit; /* MGMT frame PHY rate setting when operation at Ht rate. */ u8 MlmeRate; /* RATE_xxx, used to send MLME frames */ u8 BasicMlmeRate; /* Default Rate for sending MLME frames */ @@ -1264,7 +1265,7 @@ struct rt_common_config { struct rt_ht_capability_ie HtCapability; struct rt_add_ht_info_ie AddHTInfo; /* Useful as AP. */ /*This IE is used with channel switch announcement element when changing to a new 40MHz. */ - /*This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp. */ + /*This IE is included in channel switch announcement frames 7.4.1.5, beacons, probe Rsp. */ struct rt_new_ext_chan_ie NewExtChanOffset; /*7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present */ BOOLEAN bHTProtect; @@ -1329,7 +1330,7 @@ struct rt_sta_admin_config { /* GROUP 1 - */ /* User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe */ /* the user intended configuration, but not necessary fully equal to the final */ - /* settings in ACTIVE BSS after negotiation/compromize with the BSS holder (either */ + /* settings in ACTIVE BSS after negotiation/compromise with the BSS holder (either */ /* AP or IBSS holder). */ /* Once initialized, user configuration can only be changed via OID_xxx */ u8 BssType; /* BSS_INFRA or BSS_ADHOC */ @@ -1386,12 +1387,12 @@ struct rt_sta_admin_config { /* For WPA countermeasures */ unsigned long LastMicErrorTime; /* record last MIC error time */ - unsigned long MicErrCnt; /* Should be 0, 1, 2, then reset to zero (after disassoiciation). */ + unsigned long MicErrCnt; /* Should be 0, 1, 2, then reset to zero (after disassociation). */ BOOLEAN bBlockAssoc; /* Block associate attempt for 60 seconds after counter measure occurred. */ /* For WPA-PSK supplicant state */ WPA_STATE WpaState; /* Default is SS_NOTUSE and handled by microsoft 802.1x */ u8 ReplayCounter[8]; - u8 ANonce[32]; /* ANonce for WPA-PSK from aurhenticator */ + u8 ANonce[32]; /* ANonce for WPA-PSK from auhenticator */ u8 SNonce[32]; /* SNonce for WPA-PSK */ u8 LastSNR0; /* last received BEACON's SNR */ @@ -1423,7 +1424,7 @@ struct rt_sta_admin_config { u8 RSNIE_Len; u8 RSN_IE[MAX_LEN_OF_RSNIE]; /* The content saved here should be little-endian format. */ - unsigned long CLBusyBytes; /* Save the total bytes received durning channel load scan time */ + unsigned long CLBusyBytes; /* Save the total bytes received during channel load scan time */ u16 RPIDensity[8]; /* Array for RPI density collection */ u8 RMReqCnt; /* Number of measurement request saved. */ @@ -1489,9 +1490,9 @@ struct rt_sta_admin_config { BOOLEAN bForceTxBurst; /* 1: force enble TX PACKET BURST, 0: disable */ }; -/* This data structure keep the current active BSS/IBSS's configuration that this STA */ +/* This data structure keeps the current active BSS/IBSS's configuration that this STA */ /* had agreed upon joining the network. Which means these parameters are usually decided */ -/* by the BSS/IBSS creator instead of user configuration. Data in this data structurre */ +/* by the BSS/IBSS creator instead of user configuration. Data in this data structure */ /* is valid only when either ADHOC_ON(pAd) or INFRA_ON(pAd) is TRUE. */ /* Normally, after SCAN or failed roaming attempts, we need to recover back to */ /* the current active settings. */ @@ -1519,7 +1520,7 @@ struct rt_mac_table_entry { /*Choose 1 from ValidAsWDS and ValidAsCLI to validize. */ BOOLEAN ValidAsCLI; /* Sta mode, set this TRUE after Linkup,too. */ BOOLEAN ValidAsWDS; /* This is WDS Entry. only for AP mode. */ - BOOLEAN ValidAsApCli; /*This is a AP-Client entry, only for AP mode which enable AP-Client functions. */ + BOOLEAN ValidAsApCli; /* This is a AP-Client entry, only for AP mode which enable AP-Client functions. */ BOOLEAN ValidAsMesh; BOOLEAN ValidAsDls; /* This is DLS Entry. only for STA mode. */ BOOLEAN isCached; @@ -1527,7 +1528,7 @@ struct rt_mac_table_entry { u8 EnqueueEapolStartTimerRunning; /* Enqueue EAPoL-Start for triggering EAP SM */ /*jan for wpa */ - /* record which entry revoke MIC Failure , if it leaves the BSS itself, AP won't update aMICFailTime MIB */ + /* record which entry revoke MIC Failure, if it leaves the BSS itself, AP won't update aMICFailTime MIB */ u8 CMTimerRunning; u8 apidx; /* MBSS number */ u8 RSNIE_Len; @@ -1722,7 +1723,7 @@ struct rt_rtmp_adapter { unsigned long Rt3xxRalinkLinkCtrl; /* USed for 3090F chip */ u16 DeviceID; /* Read from PCI config */ unsigned long AccessBBPFailCount; - BOOLEAN bPCIclkOff; /* flag that indicate if the PICE power status in Configuration SPace.. */ + BOOLEAN bPCIclkOff; /* flag that indicates if the PICE power status in Configuration Space.. */ BOOLEAN bPCIclkOffDisableTx; /* */ BOOLEAN brt30xxBanMcuCmd; /*when = 0xff means all commands are ok to set . */ @@ -1871,9 +1872,9 @@ struct rt_rtmp_adapter { /* ---------------------------- */ u8 RfIcType; /* RFIC_xxx */ unsigned long RfFreqOffset; /* Frequency offset for channel switching */ - struct rt_rtmp_rf_regs LatchRfRegs; /* latch th latest RF programming value since RF IC doesn't support READ */ + struct rt_rtmp_rf_regs LatchRfRegs; /* latch the latest RF programming value since RF IC doesn't support READ */ - EEPROM_ANTENNA_STRUC Antenna; /* Since ANtenna definition is different for a & g. We need to save it for future reference. */ + EEPROM_ANTENNA_STRUC Antenna; /* Since Antenna definition is different for a & g. We need to save it for future reference. */ EEPROM_NIC_CONFIG2_STRUC NicConfig2; /* This soft Rx Antenna Diversity mechanism is used only when user set */ @@ -1990,7 +1991,7 @@ struct rt_rtmp_adapter { struct rt_common_config CommonCfg; struct rt_mlme Mlme; - /* AP needs those vaiables for site survey feature. */ + /* AP needs those variables for site survey feature. */ struct rt_mlme_aux MlmeAux; /* temporary settings used during MLME state machine */ struct rt_bss_table ScanTab; /* store the latest SCAN result */ @@ -2012,7 +2013,7 @@ struct rt_rtmp_adapter { /* various Counters */ struct rt_counter_802_3 Counters8023; /* 802.3 counters */ struct rt_counter_802_11 WlanCounters; /* 802.11 MIB counters */ - struct rt_counter_ralink RalinkCounters; /* Ralink propriety counters */ + struct rt_counter_ralink RalinkCounters; /* Ralink proprietary counters */ struct rt_counter_drs DrsCounters; /* counters for Dynamic TX Rate Switching */ struct rt_private PrivateInfo; /* Private information & counters */ @@ -2024,7 +2025,7 @@ struct rt_rtmp_adapter { u16 Sequence; /* Control disconnect / connect event generation */ - /*+++Didn't used anymore */ + /*+++Not used anymore */ unsigned long LinkDownTime; /*--- */ unsigned long LastRxRate; @@ -2036,7 +2037,7 @@ struct rt_rtmp_adapter { unsigned long ExtraInfo; /* Extra information for displaying status */ unsigned long SystemErrorBitmap; /* b0: E2PROM version error */ - /*+++Didn't used anymore */ + /*+++Not used anymore */ unsigned long MacIcVersion; /* MAC/BBP serial interface issue solved after ver.D */ /*--- */ @@ -2089,7 +2090,7 @@ struct rt_rtmp_adapter { unsigned long BulkOutReq; unsigned long BulkOutComplete; unsigned long BulkOutCompleteOther; - unsigned long BulkOutCompleteCancel; /* seems not use now? */ + unsigned long BulkOutCompleteCancel; /* seems not used now? */ unsigned long BulkInReq; unsigned long BulkInComplete; unsigned long BulkInCompleteFail; @@ -2196,9 +2197,9 @@ struct rt_rx_blk { struct rt_tx_blk { u8 QueIdx; u8 TxFrameType; /* Indicate the Transmission type of the all frames in one batch */ - u8 TotalFrameNum; /* Total frame number want to send-out in one batch */ + u8 TotalFrameNum; /* Total frame number that wants to send-out in one batch */ u16 TotalFragNum; /* Total frame fragments required in one batch */ - u16 TotalFrameLen; /* Total length of all frames want to send-out in one batch */ + u16 TotalFrameLen; /* Total length of all frames that wants to send-out in one batch */ struct rt_queue_header TxPacketList; struct rt_mac_table_entry *pMacEntry; /* NULL: packet with 802.11 RA field is multicast/broadcast address */ @@ -2207,7 +2208,7 @@ struct rt_tx_blk { /* Following structure used for the characteristics of a specific packet. */ void *pPacket; u8 *pSrcBufHeader; /* Reference to the head of sk_buff->data */ - u8 *pSrcBufData; /* Reference to the sk_buff->data, will changed depends on hanlding progresss */ + u8 *pSrcBufData; /* Reference to the sk_buff->data, will change depending on the handling progresss */ u32 SrcBufLen; /* Length of packet payload which not including Layer 2 header */ u8 *pExtraLlcSnapEncap; /* NULL means no extra LLC/SNAP is required */ u8 HeaderBuf[128]; /* TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP */ @@ -2219,7 +2220,7 @@ struct rt_tx_blk { u8 apidx; /* The interface associated to this packet */ u8 Wcid; /* The MAC entry associated to this packet */ u8 UserPriority; /* priority class of packet */ - u8 FrameGap; /* what kind of IFS this packet use */ + u8 FrameGap; /* what kind of IFS does this packet use */ u8 MpduReqNum; /* number of fragments of this frame */ u8 TxRate; /* TODO: Obsoleted? Should change to MCS? */ u8 CipherAlg; /* cipher alogrithm */ diff --git a/drivers/staging/rt2860/rtmp_def.h b/drivers/staging/rt2860/rtmp_def.h index 9c54bacb845b..6ac617e7c9bb 100644 --- a/drivers/staging/rt2860/rtmp_def.h +++ b/drivers/staging/rt2860/rtmp_def.h @@ -31,10 +31,11 @@ Miniport related definition header Revision History: - Who When What + Who When What -------- ---------- ---------------------------------------------- - Paul Lin 08-01-2002 created - John Chang 08-05-2003 add definition for 11g & other drafts + Paul Lin 08-01-2002 created + John Chang 08-05-2003 add definition for 11g & other drafts + Justin P. Mattock 11/07/2010 Fix some typos */ #ifndef __RTMP_DEF_H__ #define __RTMP_DEF_H__ @@ -111,11 +112,11 @@ WMM Note: If memory of your system is not much, please reduce the definition; or when you do WMM test, the queue for low priority AC will be full, i.e. TX_RING_SIZE + MAX_PACKETS_IN_QUEUE packets for the AC will be buffered in - WLAN, maybe no any packet buffer can be got in Ethernet driver. + WLAN, maybe no packet buffers can get into the Ethernet driver. - Sometimes no packet buffer can be got in Ethernet driver, the system will + Sometimes no packet buffer can be get into the Ethernet driver, the system will send flow control packet to the sender to slow down its sending rate. - So no WMM can be saw in the air. + So no WMM can be seen in the air. */ /* @@ -125,7 +126,7 @@ And in rt_main_end.c, clConfig.clNum = RX_RING_SIZE * 3; is changed to clConfig.clNum = RX_RING_SIZE * 4; */ -/* TODO: For VxWorks the size is 256. Shall we cahnge the value as 256 for all OS????? */ +/* TODO: For VxWorks the size is 256. Shall we change the value as 256 for all OS? */ #define MAX_PACKETS_IN_QUEUE (512) /*(512) // to pass WMM A5-WPAPSK */ #define MAX_PACKETS_IN_MCAST_PS_QUEUE 32 @@ -171,7 +172,7 @@ #define fRTMP_ADAPTER_SCAN_2040 0x04000000 #define fRTMP_ADAPTER_RADIO_MEASUREMENT 0x08000000 -#define fRTMP_ADAPTER_START_UP 0x10000000 /*Devive already initialized and enabled Tx/Rx. */ +#define fRTMP_ADAPTER_START_UP 0x10000000 /*Device already initialized and enabled Tx/Rx. */ #define fRTMP_ADAPTER_MEDIA_STATE_CHANGE 0x20000000 #define fRTMP_ADAPTER_IDLE_RADIO_OFF 0x40000000 @@ -205,8 +206,8 @@ #define fRTMP_PS_SET_PCI_CLK_OFF_COMMAND 0x00000002 /* Indicate driver should disable kick off hardware to send packets from now. */ #define fRTMP_PS_DISABLE_TX 0x00000004 -/* Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me */ -/*. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine. */ +/* Indicate driver should IMMEDIATELY go to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me */ +/* This flag is used ONLY in RTMPHandleRxDoneInterrupt routine. */ #define fRTMP_PS_GO_TO_SLEEP_NOW 0x00000008 #define fRTMP_PS_TOGGLE_L1 0x00000010 /* Use Toggle L1 mechanism for rt28xx PCIe */ @@ -303,7 +304,7 @@ /* WDS definition */ #define MAX_WDS_ENTRY 4 -#define WDS_PAIRWISE_KEY_OFFSET 60 /* WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table */ +#define WDS_PAIRWISE_KEY_OFFSET 60 /* WDS links use pairwise key#60 ~ 63 in ASIC pairwise key table */ #define WDS_DISABLE_MODE 0 #define WDS_RESTRICT_MODE 1 @@ -559,7 +560,7 @@ #define IE_ADD_HT2 53 /* 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD */ /* For 802.11n D3.03 */ -/*#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet */ +/*#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset element */ #define IE_SECONDARY_CH_OFFSET 62 /* 802.11n D3.03 Secondary Channel Offset element */ #define IE_WAPI 68 /* WAPI information element */ #define IE_2040_BSS_COEXIST 72 /* 802.11n D3.0.3 */ @@ -678,7 +679,7 @@ #define ACT_MACHINE_BASE 0 -/*Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self. */ +/*Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please do not modify it by your self. */ /*Category */ #define MT2_PEER_SPECTRUM_CATE 0 #define MT2_PEER_QOS_CATE 1 @@ -748,7 +749,7 @@ #define ACT_FUNC_SIZE (MAX_ACT_STATE * MAX_ACT_MSG) /* */ -/* STA's AUTHENTICATION state machine: states, evvents, total function # */ +/* STA's AUTHENTICATION state machine: states, events, total function # */ /* */ #define AUTH_REQ_IDLE 0 #define AUTH_WAIT_SEQ2 1 @@ -948,7 +949,7 @@ #define BLOCK_ACK 0x60 /* b6:5 = 11 */ /* */ -/* rtmp_data.c use these definition */ +/* rtmp_data.c uses this definition */ /* */ #define LENGTH_802_11 24 #define LENGTH_802_11_AND_H 30 @@ -1288,7 +1289,7 @@ #define IW_STA_LINKDOWN_EVENT_FLAG 0x0210 #define IW_SCAN_COMPLETED_EVENT_FLAG 0x0211 #define IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG 0x0212 -/* if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END */ +/* if add new system event flag, please update the IW_SYS_EVENT_FLAG_END */ #define IW_SYS_EVENT_FLAG_END 0x0212 #define IW_SYS_EVENT_TYPE_NUM (IW_SYS_EVENT_FLAG_END - IW_SYS_EVENT_FLAG_START + 1) /* For system event - end */ @@ -1305,7 +1306,7 @@ #define IW_SPOOF_DEAUTH_EVENT_FLAG 0x0307 #define IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG 0x0308 #define IW_REPLAY_ATTACK_EVENT_FLAG 0x0309 -/* if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END */ +/* if add new spoof attack event flag, please update the IW_SPOOF_EVENT_FLAG_END */ #define IW_SPOOF_EVENT_FLAG_END 0x0309 #define IW_SPOOF_EVENT_TYPE_NUM (IW_SPOOF_EVENT_FLAG_END - IW_SPOOF_EVENT_FLAG_START + 1) /* For spoof attack event - end */ @@ -1319,7 +1320,7 @@ #define IW_FLOOD_DISASSOC_EVENT_FLAG 0x0404 #define IW_FLOOD_DEAUTH_EVENT_FLAG 0x0405 #define IW_FLOOD_EAP_REQ_EVENT_FLAG 0x0406 -/* if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END */ +/* if add new flooding attack event flag, please update the IW_FLOOD_EVENT_FLAG_END */ #define IW_FLOOD_EVENT_FLAG_END 0x0406 #define IW_FLOOD_EVENT_TYPE_NUM (IW_FLOOD_EVENT_FLAG_END - IW_FLOOD_EVENT_FLAG_START + 1) /* For flooding attack - end */ diff --git a/drivers/staging/rt2860/rtmp_timer.h b/drivers/staging/rt2860/rtmp_timer.h index 28b8ac6e8352..15b628743500 100644 --- a/drivers/staging/rt2860/rtmp_timer.h +++ b/drivers/staging/rt2860/rtmp_timer.h @@ -28,13 +28,14 @@ rtmp_timer.h Abstract: - Ralink Wireless Driver timer related data structures and delcarations + Ralink Wireless Driver timer related data structures and declarations Revision History: - Who When What + Who When What -------- ---------- ---------------------------------------------- - Name Date Modification logs - Shiang Tu Aug-28-2008 init version + Name Date Modification logs + Shiang Tu Aug-28-2008 init version + Justin P. Mattock 11/07/2010 Fix a typo */ @@ -51,8 +52,8 @@ /* ----------------- Timer Related MARCO ---------------*/ /* In some os or chipset, we have a lot of timer functions and will read/write register, */ -/* it's not allowed in Linux USB sub-system to do it ( because of sleep issue when */ -/* submit to ctrl pipe). So we need a wrapper function to take care it. */ +/* it's not allowed in Linux USB sub-system to do it ( because of sleep issue when */ +/* submit to ctrl pipe). So we need a wrapper function to take care it. */ #ifdef RTMP_TIMER_TASK_SUPPORT typedef void(*RTMP_TIMER_TASK_HANDLE) (void *SystemSpecific1, diff --git a/drivers/staging/rt2860/spectrum.h b/drivers/staging/rt2860/spectrum.h index 648fd632b606..4c325ba7ba21 100644 --- a/drivers/staging/rt2860/spectrum.h +++ b/drivers/staging/rt2860/spectrum.h @@ -37,7 +37,7 @@ char RTMP_GetTxPwr(struct rt_rtmp_adapter *pAd, IN HTTRANSMIT_SETTING HTTxMode); ========================================================================== Description: Prepare Measurement request action frame and enqueue it into - management queue waiting for transmition. + management queue waiting for transmission. Parametrs: 1. the destination mac address of the frame. @@ -60,7 +60,7 @@ void MakeMeasurementReqFrame(struct rt_rtmp_adapter *pAd, ========================================================================== Description: Prepare Measurement report action frame and enqueue it into - management queue waiting for transmition. + management queue waiting for transmission. Parametrs: 1. the destination mac address of the frame. @@ -80,7 +80,7 @@ void EnqueueMeasurementRep(struct rt_rtmp_adapter *pAd, ========================================================================== Description: Prepare TPC Request action frame and enqueue it into - management queue waiting for transmition. + management queue waiting for transmission. Parametrs: 1. the destination mac address of the frame. @@ -94,7 +94,7 @@ void EnqueueTPCReq(struct rt_rtmp_adapter *pAd, u8 *pDA, u8 DialogToken); ========================================================================== Description: Prepare TPC Report action frame and enqueue it into - management queue waiting for transmition. + management queue waiting for transmission. Parametrs: 1. the destination mac address of the frame. @@ -110,7 +110,7 @@ void EnqueueTPCRep(struct rt_rtmp_adapter *pAd, ========================================================================== Description: Prepare Channel Switch Announcement action frame and enqueue it into - management queue waiting for transmition. + management queue waiting for transmission. Parametrs: 1. the destination mac address of the frame. @@ -126,7 +126,7 @@ void EnqueueChSwAnn(struct rt_rtmp_adapter *pAd, /* ========================================================================== Description: - Spectrun action frames Handler such as channel switch annoucement, + Spectrun action frames Handler such as channel switch announcement, measurement report, measurement request actions frames. Parametrs: diff --git a/drivers/staging/rt2860/sta/assoc.c b/drivers/staging/rt2860/sta/assoc.c index b7efb0b6b3f0..ab0a83bf76ef 100644 --- a/drivers/staging/rt2860/sta/assoc.c +++ b/drivers/staging/rt2860/sta/assoc.c @@ -32,7 +32,8 @@ Revision History: Who When What -------- ---------- ---------------------------------------------- - John 2004-9-3 porting from RT2500 + John 2004-9-3 porting from RT2500 + Justin P. Mattock 11/07/2010 Fix typos */ #include "../rt_config.h" @@ -277,10 +278,10 @@ void MlmeAssocReqAction(struct rt_rtmp_adapter *pAd, struct rt_mlme_queue_elem * u16 VarIesOffset; u16 Status; - /* Block all authentication request durning WPA block period */ + /* Block all authentication request during WPA block period */ if (pAd->StaCfg.bBlockAssoc == TRUE) { DBGPRINT(RT_DEBUG_TRACE, - ("ASSOC - Block Assoc request durning WPA block period!\n")); + ("ASSOC - Block Assoc request during WPA block period!\n")); pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE; Status = MLME_STATE_MACHINE_REJECT; MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, @@ -605,10 +606,10 @@ void MlmeReassocReqAction(struct rt_rtmp_adapter *pAd, struct rt_mlme_queue_elem u8 *pOutBuffer = NULL; u16 Status; - /* Block all authentication request durning WPA block period */ + /* Block all authentication request during WPA block period */ if (pAd->StaCfg.bBlockAssoc == TRUE) { DBGPRINT(RT_DEBUG_TRACE, - ("ASSOC - Block ReAssoc request durning WPA block period!\n")); + ("ASSOC - Block ReAssoc request during WPA block period!\n")); pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE; Status = MLME_STATE_MACHINE_REJECT; MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, @@ -1001,7 +1002,7 @@ void AssocPostProc(struct rt_rtmp_adapter *pAd, u8 *pAddr2, u16 CapabilityInfo, pAd->MlmeAux.CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO; - /* Some HT AP might lost WMM IE. We add WMM ourselves. beacuase HT requires QoS on. */ + /* Some HT AP might lost WMM IE. We add WMM ourselves. because HT requires QoS on. */ if ((HtCapabilityLen > 0) && (pEdcaParm->bValid == FALSE)) { pEdcaParm->bValid = TRUE; pEdcaParm->Aifsn[0] = 3; diff --git a/drivers/staging/rt2860/sta/auth.c b/drivers/staging/rt2860/sta/auth.c index 404bd220679d..a2bfafddb20e 100644 --- a/drivers/staging/rt2860/sta/auth.c +++ b/drivers/staging/rt2860/sta/auth.c @@ -32,7 +32,8 @@ Revision History: Who When What -------- ---------- ---------------------------------------------- - John 2004-9-3 porting from RT2500 + John 2004-9-3 porting from RT2500 + Justin P. Mattock 11/07/2010 Fix typos */ #include "../rt_config.h" @@ -455,10 +456,10 @@ BOOLEAN AUTH_ReqSend(struct rt_rtmp_adapter *pAd, u8 *pOutBuffer = NULL; unsigned long FrameLen = 0, tmp = 0; - /* Block all authentication request durning WPA block period */ + /* Block all authentication request during WPA block period */ if (pAd->StaCfg.bBlockAssoc == TRUE) { DBGPRINT(RT_DEBUG_TRACE, - ("%s - Block Auth request durning WPA block period!\n", + ("%s - Block Auth request during WPA block period!\n", pSMName)); pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE; Status = MLME_STATE_MACHINE_REJECT; diff --git a/drivers/staging/rt2860/sta/connect.c b/drivers/staging/rt2860/sta/connect.c index c380551c0354..4b2c84e6509e 100644 --- a/drivers/staging/rt2860/sta/connect.c +++ b/drivers/staging/rt2860/sta/connect.c @@ -32,7 +32,8 @@ Revision History: Who When What -------- ---------- ---------------------------------------------- - John 2004-08-08 Major modification from RT2560 + John 2004-08-08 Major modification from RT2560 + Justin P. Mattock 11/07/2010 Fix typos */ #include "../rt_config.h" @@ -64,7 +65,7 @@ u8 CipherSuiteWpaNoneAesLen = /* The following MACRO is called after 1. starting an new IBSS, 2. successfully JOIN an IBSS, */ /* or 3. successfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS */ -/* All settings successfuly negotiated furing MLME state machines become final settings */ +/* All settings successfuly negotiated firing MLME state machines become final settings */ /* and are copied to pAd->StaActive */ #define COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd) \ { \ @@ -553,7 +554,7 @@ void CntlOidRTBssidProc(struct rt_rtmp_adapter *pAd, struct rt_mlme_queue_elem * NdisMoveMemory(&pAd->MlmeAux.SsidBssTab.BssEntry[0], &pAd->ScanTab.BssEntry[BssIdx], sizeof(struct rt_bss_entry)); - /* Add SSID into MlmeAux for site surey joining hidden SSID */ + /* Add SSID into MlmeAux for site survey joining hidden SSID */ pAd->MlmeAux.SsidLen = pAd->ScanTab.BssEntry[BssIdx].SsidLen; NdisMoveMemory(pAd->MlmeAux.Ssid, pAd->ScanTab.BssEntry[BssIdx].Ssid, pAd->MlmeAux.SsidLen); @@ -666,7 +667,7 @@ void CntlOidRTBssidProc(struct rt_rtmp_adapter *pAd, struct rt_mlme_queue_elem * } /* Roaming is the only external request triggering CNTL state machine */ -/* despite of other "SET OID" operation. All "SET OID" related oerations */ +/* despite of other "SET OID" operation. All "SET OID" related operations */ /* happen in sequence, because no other SET OID will be sent to this device */ /* until the the previous SET operation is complete (successful o failed). */ /* So, how do we quarantee this ROAMING request won't corrupt other "SET OID"? */ @@ -1224,7 +1225,7 @@ void LinkUp(struct rt_rtmp_adapter *pAd, u8 BssType) /* Change to AP channel */ if ((pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) { - /* Must using 40MHz. */ + /* Must use 40MHz. */ pAd->CommonCfg.BBPCurrentBW = BW_40; AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); @@ -1259,7 +1260,7 @@ void LinkUp(struct rt_rtmp_adapter *pAd, u8 BssType) } else if ((pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) { - /* Must using 40MHz. */ + /* Must use 40MHz. */ pAd->CommonCfg.BBPCurrentBW = BW_40; AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); @@ -1343,12 +1344,12 @@ void LinkUp(struct rt_rtmp_adapter *pAd, u8 BssType) AsicSetSlotTime(pAd, TRUE); AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm); - /* Call this for RTS protectionfor legacy rate, we will always enable RTS threshold, but normally it will not hit */ + /* Call this for RTS protection for legacy rate, we will always enable RTS threshold, but normally it will not hit */ AsicUpdateProtect(pAd, 0, (OFDMSETPROTECT | CCKSETPROTECT), TRUE, FALSE); if ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE)) { - /* Update HT protectionfor based on AP's operating mode. */ + /* Update HT protection for based on AP's operating mode. */ if (pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent == 1) { AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2. @@ -1530,7 +1531,7 @@ void LinkUp(struct rt_rtmp_adapter *pAd, u8 BssType) /* Add BSSID to WCID search table */ AsicUpdateRxWCIDTable(pAd, BSSID_WCID, pAd->CommonCfg.Bssid); - /* If WEP is enabled, add paiewise and shared key */ + /* If WEP is enabled, add pairwise and shared key */ if (((pAd->StaCfg.WpaSupplicantUP) && (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled) && (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)) || @@ -1681,9 +1682,9 @@ void LinkUp(struct rt_rtmp_adapter *pAd, u8 BssType) pAd->Mlme.PeriodicRound = 0; pAd->Mlme.OneSecPeriodicRound = 0; pAd->bConfigChanged = FALSE; /* Reset config flag */ - pAd->ExtraInfo = GENERAL_LINK_UP; /* Update extra information to link is up */ + pAd->ExtraInfo = GENERAL_LINK_UP; /* Update extra information after link is up */ - /* Set asic auto fall back */ + /* Set basic auto fall back */ { u8 *pTable; u8 TableSize = 0; @@ -1854,8 +1855,8 @@ void LinkUp(struct rt_rtmp_adapter *pAd, u8 BssType) Note: We need more information to know it's this requst from AP. If yes! we need to do extra handling, for example, remove the WPA key. - Otherwise on 4-way handshaking will faied, since the WPA key didn't be - remove while auto reconnect. + Otherwise on 4-way handshaking will fail, since the WPA key didn't get + removed while auto reconnect. Disconnect request from AP, it means we will start afresh 4-way handshaking on WPA mode. @@ -1870,9 +1871,9 @@ void LinkDown(struct rt_rtmp_adapter *pAd, IN BOOLEAN IsReqFromAP) return; RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW); - /*Comment the codes, beasue the line 2291 call the same function. */ - /*RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); */ - /* Not allow go to sleep within linkdown function. */ + /* Comment the codes, because the line 2291 call the same function. */ + /* RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); */ + /* Not allowed go to sleep within the linkdown function. */ RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); if (pAd->CommonCfg.bWirelessEvent) { @@ -1970,7 +1971,7 @@ void LinkDown(struct rt_rtmp_adapter *pAd, IN BOOLEAN IsReqFromAP) /* Set LED */ RTMPSetLED(pAd, LED_LINK_DOWN); pAd->LedIndicatorStrength = 0xF0; - RTMPSetSignalLED(pAd, -100); /* Force signal strength Led to be turned off, firmware is not done it. */ + RTMPSetSignalLED(pAd, -100); /* Force signal strength Led to be turned off, firmware has not done it. */ AsicDisableSync(pAd); diff --git a/drivers/staging/rt2860/sta/rtmp_data.c b/drivers/staging/rt2860/sta/rtmp_data.c index 23879b7cd49a..d7c2012be8a5 100644 --- a/drivers/staging/rt2860/sta/rtmp_data.c +++ b/drivers/staging/rt2860/sta/rtmp_data.c @@ -31,7 +31,8 @@ Data path subroutines Revision History: - Who When What + Who When What + Justin P. Mattock 11/07/2010 Fix typos -------- ---------- ---------------------------------------------- */ #include "../rt_config.h" @@ -257,8 +258,8 @@ void STARxDataFrameAnnounce(struct rt_rtmp_adapter *pAd, && (pAd->CommonCfg.bDisableReordering == 0)) { Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID); } else { - /* Determin the destination of the EAP frame */ - /* to WPA state machine or upper layer */ + /* Determine the destination of the EAP frame */ + /* to WPA state machine or upper layer */ STARxEAPOLFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID); } @@ -853,7 +854,7 @@ Return Value: NONE Note: - This function do early checking and classification for send-out packet. + This function does early checking and classification for send-out packet. You only can put OS-depened & STA related code in here. ======================================================================== */ @@ -943,7 +944,7 @@ int STASendPacket(struct rt_rtmp_adapter *pAd, void *pPacket) DBGPRINT(RT_DEBUG_ERROR, ("STASendPacket --> pSrcBufVA == NULL !SrcBufLen=%x\n", SrcBufLen)); - /* Resourece is low, system did not allocate virtual address */ + /* Resource is low, system did not allocate virtual address */ /* return NDIS_STATUS_FAILURE directly to upper layer */ RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE); return NDIS_STATUS_FAILURE; @@ -979,7 +980,7 @@ int STASendPacket(struct rt_rtmp_adapter *pAd, void *pPacket) DBGPRINT(RT_DEBUG_ERROR, ("STASendPacket->Cannot find pEntry(%pM) in MacTab!\n", pSrcBufVA)); - /* Resourece is low, system did not allocate virtual address */ + /* Resource is low, system did not allocate virtual address */ /* return NDIS_STATUS_FAILURE directly to upper layer */ RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE); return NDIS_STATUS_FAILURE; @@ -1057,9 +1058,9 @@ int STASendPacket(struct rt_rtmp_adapter *pAd, void *pPacket) /* STEP 2. Check the requirement of RTS: */ /* If multiple fragment required, RTS is required only for the first fragment */ - /* if the fragment size large than RTS threshold */ + /* if the fragment size is larger than RTS threshold */ /* For RT28xx, Let ASIC send RTS/CTS */ -/* RTMP_SET_PACKET_RTS(pPacket, 0); */ + /* RTMP_SET_PACKET_RTS(pPacket, 0); */ if (NumberOfFrag > 1) RTSRequired = (pAd->CommonCfg.FragmentThreshold > @@ -1171,8 +1172,8 @@ int STASendPacket(struct rt_rtmp_adapter *pAd, void *pPacket) ======================================================================== Routine Description: - This subroutine will scan through releative ring descriptor to find - out avaliable free ring descriptor and compare with request size. + This subroutine will scan through relative ring descriptor to find + out available free ring descriptor and compare with request size. Arguments: pAd Pointer to our adapter @@ -1588,7 +1589,7 @@ static inline u8 *STA_Build_ARalink_Frame_Header(struct rt_rtmp_adapter *pAd, pHeaderBufPtr += 2; pTxBlk->MpduHeaderLen += 2; } - /* padding at front of LLC header. LLC header should at 4-bytes aligment. */ + /* padding at front of LLC header. LLC header should at 4-bytes alignment. */ pTxBlk->HdrPadLen = (unsigned long)pHeaderBufPtr; pHeaderBufPtr = (u8 *)ROUND_UP(pHeaderBufPtr, 4); pTxBlk->HdrPadLen = (unsigned long)(pHeaderBufPtr - pTxBlk->HdrPadLen); @@ -2014,7 +2015,7 @@ void STA_Legacy_Frame_Tx(struct rt_rtmp_adapter *pAd, struct rt_tx_blk *pTxBlk) pHeaderBufPtr += 2; pTxBlk->MpduHeaderLen += 2; } - /* The remaining content of MPDU header should locate at 4-octets aligment */ + /* The remaining content of MPDU header should locate at 4-octets alignment */ pTxBlk->HdrPadLen = (unsigned long)pHeaderBufPtr; pHeaderBufPtr = (u8 *)ROUND_UP(pHeaderBufPtr, 4); pTxBlk->HdrPadLen = (unsigned long)(pHeaderBufPtr - pTxBlk->HdrPadLen); @@ -2114,7 +2115,7 @@ void STA_ARalink_Frame_Tx(struct rt_rtmp_adapter *pAd, struct rt_tx_blk *pTxBlk) STA_Build_ARalink_Frame_Header(pAd, pTxBlk); /* It's ok write the TxWI here, because the TxWI->MPDUtotalByteCount */ - /* will be updated after final frame was handled. */ + /* will be updated after final frame was handled. */ RTMPWriteTxWI_Data(pAd, (struct rt_txwi *) (&pTxBlk-> HeaderBuf @@ -2291,8 +2292,8 @@ void STA_Fragment_Frame_Tx(struct rt_rtmp_adapter *pAd, struct rt_tx_blk *pTxBlk pTxBlk->pExtraLlcSnapEncap, pTxBlk->pKey, 0); - /* NOTE: DON'T refer the skb->len directly after following copy. Becasue the length is not adjust */ - /* to correct lenght, refer to pTxBlk->SrcBufLen for the packet length in following progress. */ + /* NOTE: DON'T refer the skb->len directly after following copy. Because the length is not adjusted */ + /* to correct length, refer to pTxBlk->SrcBufLen for the packet length in following progress. */ NdisMoveMemory(pTxBlk->pSrcBufData + pTxBlk->SrcBufLen, &pAd->PrivateInfo.Tx.MIC[0], 8); /*skb_put((RTPKT_TO_OSPKT(pTxBlk->pPacket))->tail, 8); */ @@ -2301,7 +2302,7 @@ void STA_Fragment_Frame_Tx(struct rt_rtmp_adapter *pAd, struct rt_tx_blk *pTxBlk pTxBlk->CipherAlg = CIPHER_TKIP_NO_MIC; } /* */ - /* calcuate the overhead bytes that encryption algorithm may add. This */ + /* calculate the overhead bytes that encryption algorithm may add. This */ /* affects the calculate of "duration" field */ /* */ if ((pTxBlk->CipherAlg == CIPHER_WEP64) diff --git a/drivers/staging/rt2860/sta/sanity.c b/drivers/staging/rt2860/sta/sanity.c index 8f9fd19be151..0c32604f2d3f 100644 --- a/drivers/staging/rt2860/sta/sanity.c +++ b/drivers/staging/rt2860/sta/sanity.c @@ -32,7 +32,8 @@ Revision History: Who When What -------- ---------- ---------------------------------------------- - John Chang 2004-09-01 add WMM support + John Chang 2004-09-01 add WMM support + Justin P. Mattock 11/07/2010 Fix typos */ #include "../rt_config.h" @@ -118,7 +119,7 @@ BOOLEAN PeerAssocRspSanity(struct rt_rtmp_adapter *pAd, void * pMsg, unsigned lo NdisMoveMemory(pAid, &pFrame->Octet[4], 2); Length += 2; - /* Aid already swaped byte order in RTMPFrameEndianChange() for big endian platform */ + /* Aid already swapped byte order in RTMPFrameEndianChange() for big endian platform */ *pAid = (*pAid) & 0x3fff; /* AID is low 14-bit */ /* -- get supported rates from payload and advance the pointer */ diff --git a/drivers/staging/rt2860/sta/sync.c b/drivers/staging/rt2860/sta/sync.c index 747d3c6d1851..05007d9c9b69 100644 --- a/drivers/staging/rt2860/sta/sync.c +++ b/drivers/staging/rt2860/sta/sync.c @@ -32,8 +32,9 @@ Revision History: Who When What -------- ---------- ---------------------------------------------- - John Chang 2004-09-01 modified for rt2561/2661 - Jan Lee 2006-08-01 modified for rt2860 for 802.11n + John Chang 2004-09-01 modified for rt2561/2661 + Jan Lee 2006-08-01 modified for rt2860 for 802.11n + Justin P. Mattock 11/07/2010 Fix typos */ #include "../rt_config.h" @@ -233,9 +234,9 @@ void MlmeScanReqAction(struct rt_rtmp_adapter *pAd, struct rt_mlme_queue_elem *E RTMPSuspendMsduTransmission(pAd); /* */ - /* To prevent data lost. */ - /* Send an NULL data with turned PSM bit on to current associated AP before SCAN progress. */ - /* And should send an NULL data with turned PSM bit off to AP, when scan progress done */ + /* To prevent data loss. */ + /* Send a NULL data with turned PSM bit on to current associated AP before SCAN progress. */ + /* And should send a NULL data with turned PSM bit off to AP, when scan progress done */ /* */ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) && (INFRA_ON(pAd))) { @@ -750,9 +751,9 @@ void PeerBeaconAtJoinAction(struct rt_rtmp_adapter *pAd, struct rt_mlme_queue_el /* BEACON from desired BSS/IBSS found. We should be able to decide most */ /* BSS parameters here. */ - /* Q. But what happen if this JOIN doesn't conclude a successful ASSOCIATEION? */ - /* Do we need to receover back all parameters belonging to previous BSS? */ - /* A. Should be not. There's no back-door recover to previous AP. It still need */ + /* Q. But what happen if this JOIN doesn't conclude a successful ASSOCIATION? */ + /* Do we need to recover back all parameters belonging to previous BSS? */ + /* A. Should be not. There's no back-door recover to previous AP. It still needs */ /* a new JOIN-AUTH-ASSOC sequence. */ if (MAC_ADDR_EQUAL(pAd->MlmeAux.Bssid, Bssid)) { DBGPRINT(RT_DEBUG_TRACE, @@ -876,7 +877,7 @@ void PeerBeaconAtJoinAction(struct rt_rtmp_adapter *pAd, struct rt_mlme_queue_el pAd->MlmeAux.CfpMaxDuration = Cf.CfpMaxDuration; pAd->MlmeAux.APRalinkIe = RalinkIe; - /* Copy AP's supported rate to MlmeAux for creating assoication request */ + /* Copy AP's supported rate to MlmeAux for creating association request */ /* Also filter out not supported rate */ pAd->MlmeAux.SupRateLen = SupRateLen; NdisMoveMemory(pAd->MlmeAux.SupRate, SupRate, diff --git a/drivers/staging/rt2860/sta/wpa.c b/drivers/staging/rt2860/sta/wpa.c index 69b8a24daa21..ff348325028b 100644 --- a/drivers/staging/rt2860/sta/wpa.c +++ b/drivers/staging/rt2860/sta/wpa.c @@ -33,7 +33,8 @@ Who When What -------- ---------- ---------------------------------------------- Jan Lee 03-07-22 Initial - Paul Lin 03-11-28 Modify for supplicant + Paul Lin 03-11-28 Modify for supplicant + Justin P. Mattock 11/07/2010 Fix typos */ #include "../rt_config.h" @@ -86,7 +87,7 @@ void RTMPReportMicError(struct rt_rtmp_adapter *pAd, struct rt_cipher_key *pWpaK /* Violate MIC error counts, MIC countermeasures kicks in */ pAd->StaCfg.MicErrCnt++; /* We shall block all reception */ - /* We shall clean all Tx ring and disassoicate from AP after next EAPOL frame */ + /* We shall clean all Tx ring and disassociate from AP after next EAPOL frame */ /* */ /* No necessary to clean all Tx ring, on RTMPHardTransmit will stop sending non-802.1X EAPOL packets */ /* if pAd->StaCfg.MicErrCnt greater than 2. */ diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c index e095a44cbc0e..5717e12a9544 100644 --- a/drivers/staging/rt2860/sta_ioctl.c +++ b/drivers/staging/rt2860/sta_ioctl.c @@ -31,10 +31,11 @@ IOCTL related subroutines Revision History: - Who When What + Who When What -------- ---------- ---------------------------------------------- - Rory Chen 01-03-2003 created - Rory Chen 02-14-2005 modify to support RT61 + Rory Chen 01-03-2003 created + Rory Chen 02-14-2005 modify to support RT61 + Justin P. Mattock 11/07/2010 Fix typos */ #include "rt_config.h" @@ -851,7 +852,7 @@ int rt_ioctl_giwscan(struct net_device *dev, /* Protocol: - it will show scanned AP's WirelessMode . + it will show scanned AP's WirelessMode. it might be 802.11a 802.11a/n @@ -875,13 +876,13 @@ int rt_ioctl_giwscan(struct net_device *dev, strcpy(iwe.u.name, "802.11a"); } else { /* - if one of non B mode rate is set supported rate . it mean G only. + if one of non B mode rate is set supported rate, it means G only. */ for (rateCnt = 0; rateCnt < pBssEntry->SupRateLen; rateCnt++) { /* - 6Mbps(140) 9Mbps(146) and >=12Mbps(152) are supported rate , it mean G only. + 6Mbps(140) 9Mbps(146) and >=12Mbps(152) are supported rate, it means G only. */ if (pBssEntry->SupRate[rateCnt] == 140 || pBssEntry->SupRate[rateCnt] == @@ -1417,7 +1418,7 @@ int rt_ioctl_siwencode(struct net_device *dev, if ((index >= 0) && (index < 4)) { pAdapter->StaCfg.DefaultKeyId = index; } else - /* Don't complain if only change the mode */ + /* Don't complain if the mode is only changed */ if (!(erq->flags & IW_ENCODE_MODE)) return -EINVAL; } @@ -2732,8 +2733,8 @@ int Set_NetworkType_Proc(struct rt_rtmp_adapter *pAdapter, char *arg) } if (INFRA_ON(pAdapter)) { /*BOOLEAN Cancelled; */ - /* Set the AutoReconnectSsid to prevent it reconnect to old SSID */ - /* Since calling this indicate user don't want to connect to that SSID anymore. */ + /* Set the AutoReconnectSsid to prevent it from reconnecting to the old SSID */ + /* Since calling this indicates users don't want to connect to that SSID anymore. */ pAdapter->MlmeAux.AutoReconnectSsidLen = 32; NdisZeroMemory(pAdapter->MlmeAux. AutoReconnectSsid, @@ -2766,8 +2767,8 @@ int Set_NetworkType_Proc(struct rt_rtmp_adapter *pAdapter, char *arg) LinkDown(pAdapter, FALSE); } if (ADHOC_ON(pAdapter)) { - /* Set the AutoReconnectSsid to prevent it reconnect to old SSID */ - /* Since calling this indicate user don't want to connect to that SSID anymore. */ + /* Set the AutoReconnectSsid to prevent it from reconnecting to the old SSID */ + /* Since calling this indicates users don't want to connect to that SSID anymore. */ pAdapter->MlmeAux.AutoReconnectSsidLen = 32; NdisZeroMemory(pAdapter->MlmeAux. AutoReconnectSsid, @@ -2884,7 +2885,7 @@ int Set_NetworkType_Proc(struct rt_rtmp_adapter *pAdapter, char *arg) } /* Enable Rx with promiscuous reception */ RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, 0x3); - /* ASIC supporsts sniffer function with replacing RSSI with timestamp. */ + /* ASIC supports sniffer function with replacing RSSI with timestamp. */ /*RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value); */ /*Value |= (0x80); */ /*RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value); */ diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c index ebf9074a9083..a8820d3f6b3a 100644 --- a/drivers/staging/rt2860/usb_main_dev.c +++ b/drivers/staging/rt2860/usb_main_dev.c @@ -27,8 +27,8 @@ #include "rt_config.h" /* Following information will be show when you run 'modinfo' */ -/* *** If you have a solution for the bug in current version of driver, please mail to me. */ -/* Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. *** */ +/* If you have a solution for the bug in current version of driver, please e-mail me. */ +/* Otherwise post to the forum at ralinktech's web site(www.ralinktech.com) and let all users help you. */ MODULE_AUTHOR("Paul Lin "); MODULE_DESCRIPTION("RT2870/RT3070 Wireless Lan Linux Driver"); MODULE_LICENSE("GPL"); @@ -882,8 +882,8 @@ static int __devinit rt2870_probe(IN struct usb_interface *intf, if (net_dev == NULL) goto err_out_free_radev; - /* Here are the net_device structure with usb specific parameters. */ - /* for supporting Network Manager. + /* Here are the net_device structure with usb specific parameters. + * for supporting Network Manager. * Set the sysfs physical device reference for the network logical device if set prior to registration will * cause a symlink during initialization. */ diff --git a/drivers/staging/rt2860/wpa.h b/drivers/staging/rt2860/wpa.h index 6199ae6cdcd0..116fc2caa886 100644 --- a/drivers/staging/rt2860/wpa.h +++ b/drivers/staging/rt2860/wpa.h @@ -32,13 +32,14 @@ Revision History: Who When What -------- ---------- ---------------------------------------------- - Name Date Modification logs + Name Date Modification logs + Justin P. Mattock 11/07/2010 Fix a typo */ #ifndef __WPA_H__ #define __WPA_H__ -/* EAPOL Key descripter frame format related length */ +/* EAPOL Key descriptor frame format related length */ #define LEN_KEY_DESC_NONCE 32 #define LEN_KEY_DESC_IV 16 #define LEN_KEY_DESC_RSC 8