ASoC: More updates for v3.8

Nothing terribly exciting here, just small localised changes.
 
 As well as fixes there are a couple of Cirrus changes and one devm_
 change which were in prior to the merge window but got missed from the
 original pull to Takashi.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQzJCAAAoJELSic+t+oim976sQAI8OMV9oRV2qjhjWz+WRQlR7
 dPMLRh1UzBKaYxs4izF21Kp4tfH6fQfopZb5m13JZJXEgjp1cV+3FyZaxQHrdJz4
 n6+vrzc2yp8PRdgv0FDuqbnKVlgxEJQEqX/okWjGFYg4AGn6St0UsDgH1eHt+QsF
 LTsbDnEwgsfni7ybUeukv6RyPpskfw+KfBpKyHfb1lf/5x+W9sel96Hsf/ihFLIT
 Ij1wPjYarK5LYfwNqQO4g1FaBAe4TmKEUOt0sjMCx7B3icDp4tgp+rbEOEdA1bLJ
 w9cJu5HPkvyXcin6cguk6Hu4QmPPSyi2Q56dnwTqdP+2Dq4rQzUd6e9BFdvkQqpR
 Pn2L8RQRv3RMD+mgPVnMJK5LnKF5iBKzEZINa32CeacTTjThMbRUr0odo+Wc4Xql
 kfoNmSU2rMwM93pweWD/OGl6Am0WrmNWy8jDnkvhhEd5+ZEAQkox6fiSZTe0YLCs
 CZ0TIW/7UzqaUv5MqRKg3W5+9rdsxcaMgIbjB7LE+MKBaLApHIPgBqRpqRtfwTh1
 DPr1lCUqjJoJomMPHVhIPq7ktR1oHuVULEtGPyxygaxLSmbAA8ib2r7e8fsA0GTS
 joJsLrRU6+X9fIK272NmC15dbflnv6cgvaba2RDkenM8+DHqpNrufRqe0MflzoEU
 0p9h7mTLk5+No+DzxWfs
 =3VlW
 -----END PGP SIGNATURE-----

Merge tag 'asoc-3.8p1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: More updates for v3.8

Nothing terribly exciting here, just small localised changes.

As well as fixes there are a couple of Cirrus changes and one devm_
change which were in prior to the merge window but got missed from the
original pull to Takashi.

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc7
+EXTRAVERSION =
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*
@@ -1321,10 +1321,12 @@ kernelversion:
 
 # Clear a bunch of variables before executing the submake
 tools/: FORCE
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= -C $(src)/tools/
+	$(Q)mkdir -p $(objtree)/tools
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/
 
 tools/%: FORCE
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= -C $(src)/tools/ $*
+	$(Q)mkdir -p $(objtree)/tools
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/ $*
 
 # Single targets
 # ---------------------------------------------------------------------------

arch/arm/Kconfig

@@ -547,6 +547,7 @@ config ARCH_KIRKWOOD
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
 	select PCI
+	select PCI_QUIRKS
 	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Kirkwood series SoCs:

arch/arm/boot/compressed/head.S

@@ -652,6 +652,15 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		mov	pc, lr
 ENDPROC(__setup_mmu)
 
+@ Enable unaligned access on v6, to allow better code generation
+@ for the decompressor C code:
+__armv6_mmu_cache_on:
+		mrc	p15, 0, r0, c1, c0, 0	@ read SCTLR
+		bic	r0, r0, #2		@ A (no unaligned access fault)
+		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
+		mcr	p15, 0, r0, c1, c0, 0	@ write SCTLR
+		b	__armv4_mmu_cache_on
+
 __arm926ejs_mmu_cache_on:
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
 		mov	r0, #4			@ put dcache in WT mode
@@ -694,6 +703,9 @@ __armv7_mmu_cache_on:
 		bic	r0, r0, #1 << 28	@ clear SCTLR.TRE
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+		bic	r0, r0, #2		@ A (no unaligned access fault)
+		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
+						@ (needed for ARM1176)
 #ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
@@ -914,7 +926,7 @@ proc_types:
 
 		.word	0x0007b000		@ ARMv6
 		.word	0x000ff000
-		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv6_mmu_cache_on
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv6_mmu_cache_flush
 

arch/arm/boot/dts/at91sam9260.dtsi

@@ -217,7 +217,7 @@
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfffbc000 0x4000>;
 				interrupts = <14 4 5>;
-				status = "disable";
+				status = "disabled";
 			};
 
 			adc0: adc@fffe0000 {

arch/arm/boot/dts/at91sam9263.dtsi

@@ -179,14 +179,14 @@
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfff98000 0x4000>;
 				interrupts = <16 4 5>;
-				status = "disable";
+				status = "disabled";
 			};
 
 			ssc1: ssc@fff9c000 {
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfff9c000 0x4000>;
 				interrupts = <17 4 5>;
-				status = "disable";
+				status = "disabled";
 			};
 
 			macb0: ethernet@fffbc000 {

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -232,14 +232,14 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfff9c000 0x4000>;
 				interrupts = <16 4 5>;
-				status = "disable";
+				status = "disabled";
 			};
 
 			ssc1: ssc@fffa0000 {
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfffa0000 0x4000>;
 				interrupts = <17 4 5>;
-				status = "disable";
+				status = "disabled";
 			};
 
 			adc0: adc@fffb0000 {

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -92,7 +92,7 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf0010000 0x4000>;
 				interrupts = <28 4 5>;
-				status = "disable";
+				status = "disabled";
 			};
 
 			tcb0: timer@f8008000 {

arch/arm/common/timer-sp.c

@@ -162,7 +162,6 @@ static struct clock_event_device sp804_clockevent = {
 	.set_mode	= sp804_set_mode,
 	.set_next_event	= sp804_set_next_event,
 	.rating		= 300,
-	.cpumask	= cpu_all_mask,
 };
 
 static struct irqaction sp804_timer_irq = {
@@ -185,6 +184,7 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
 	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
 	evt->name = name;
 	evt->irq = irq;
+	evt->cpumask = cpu_possible_mask;
 
 	setup_irq(irq, &sp804_timer_irq);
 	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);

arch/arm/mach-dove/include/mach/pm.h

@@ -63,7 +63,7 @@ static inline int pmu_to_irq(int pin)
 
 static inline int irq_to_pmu(int irq)
 {
-	if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+	if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS)
 		return irq - IRQ_DOVE_PMU_START;
 
 	return -EINVAL;

arch/arm/mach-dove/irq.c

@@ -46,8 +46,20 @@ static void pmu_irq_ack(struct irq_data *d)
 	int pin = irq_to_pmu(d->irq);
 	u32 u;
 
+	/*
+	 * The PMU mask register is not RW0C: it is RW.  This means that
+	 * the bits take whatever value is written to them; if you write
+	 * a '1', you will set the interrupt.
+	 *
+	 * Unfortunately this means there is NO race free way to clear
+	 * these interrupts.
+	 *
+	 * So, let's structure the code so that the window is as small as
+	 * possible.
+	 */
 	u = ~(1 << (pin & 31));
-	writel(u, PMU_INTERRUPT_CAUSE);
+	u &= readl_relaxed(PMU_INTERRUPT_CAUSE);
+	writel_relaxed(u, PMU_INTERRUPT_CAUSE);
 }
 
 static struct irq_chip pmu_irq_chip = {

arch/arm/mach-ixp4xx/common-pci.c

@@ -410,6 +410,7 @@ void __init ixp4xx_pci_preinit(void)
 		 * Enable the IO window to be way up high, at 0xfffffc00
 		 */
 		local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01);
+		local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */
 	} else {
 		printk("PCI: IXP4xx is target - No bus scan performed\n");
 	}

arch/arm/mach-ixp4xx/common.c

@@ -67,15 +67,12 @@ static struct map_desc ixp4xx_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
 		.length		= IXP4XX_PCI_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
-	},
+	}, {	/* Queue Manager */
-#ifdef CONFIG_DEBUG_LL
+		.virtual	= (unsigned long)IXP4XX_QMGR_BASE_VIRT,
-	{	/* Debug UART mapping */
+		.pfn		= __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS),
-		.virtual	= (unsigned long)IXP4XX_DEBUG_UART_BASE_VIRT,
+		.length		= IXP4XX_QMGR_REGION_SIZE,
-		.pfn		= __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
-		.length		= IXP4XX_DEBUG_UART_REGION_SIZE,
 		.type		= MT_DEVICE
-	}
+	},
-#endif
 };
 
 void __init ixp4xx_map_io(void)

arch/arm/mach-ixp4xx/goramo_mlr.c

@@ -15,6 +15,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/pci.h>
+#include <asm/system_info.h>
 
 #define SLOT_ETHA		0x0B	/* IDSEL = AD21 */
 #define SLOT_ETHB		0x0C	/* IDSEL = AD20 */
@@ -329,7 +330,7 @@ static struct platform_device device_hss_tab[] = {
 };
 
 
-static struct platform_device *device_tab[6] __initdata = {
+static struct platform_device *device_tab[7] __initdata = {
 	&device_flash,		/* index 0 */
 };
 

arch/arm/mach-ixp4xx/include/mach/debug-macro.S

@@ -17,8 +17,8 @@
 #else
 		mov	\rp, #0
 #endif
-                orr     \rv, \rp, #0xff000000	@ virtual
+		orr	\rv, \rp, #0xfe000000	@ virtual
-		orr	\rv, \rv, #0x00b00000
+		orr	\rv, \rv, #0x00f00000
                 orr     \rp, \rp, #0xc8000000	@ physical
                 .endm
 

arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h

@@ -30,51 +30,43 @@
  *
  * 0x50000000	0x10000000	ioremap'd	EXP BUS
  *
- * 0x6000000	0x00004000	ioremap'd	QMgr
+ * 0xC8000000	0x00013000	0xFEF00000	On-Chip Peripherals
  *
- * 0xC0000000	0x00001000	0xffbff000	PCI CFG
+ * 0xC0000000	0x00001000	0xFEF13000	PCI CFG
  *
- * 0xC4000000	0x00001000	0xffbfe000	EXP CFG
+ * 0xC4000000	0x00001000	0xFEF14000	EXP CFG
  *
- * 0xC8000000	0x00013000	0xffbeb000	On-Chip Peripherals
+ * 0x60000000	0x00004000	0xFEF15000	QMgr
  */
 
 /*
  * Queue Manager
  */
-#define IXP4XX_QMGR_BASE_PHYS		(0x60000000)
+#define IXP4XX_QMGR_BASE_PHYS		0x60000000
-#define IXP4XX_QMGR_REGION_SIZE		(0x00004000)
+#define IXP4XX_QMGR_BASE_VIRT		IOMEM(0xFEF15000)
+#define IXP4XX_QMGR_REGION_SIZE		0x00004000
 
 /*
- * Expansion BUS Configuration registers
+ * Peripheral space, including debug UART. Must be section-aligned so that
+ * it can be used with the low-level debug code.
  */
-#define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
+#define IXP4XX_PERIPHERAL_BASE_PHYS	0xC8000000
-#define IXP4XX_EXP_CFG_BASE_VIRT	IOMEM(0xFFBFE000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFEF00000)
-#define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
+#define IXP4XX_PERIPHERAL_REGION_SIZE	0x00013000
 
 /*
  * PCI Config registers
  */
-#define IXP4XX_PCI_CFG_BASE_PHYS	(0xC0000000)
+#define IXP4XX_PCI_CFG_BASE_PHYS	0xC0000000
-#define	IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFFBFF000)
+#define IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFEF13000)
-#define IXP4XX_PCI_CFG_REGION_SIZE	(0x00001000)
+#define IXP4XX_PCI_CFG_REGION_SIZE	0x00001000
 
 /*
- * Peripheral space
+ * Expansion BUS Configuration registers
  */
-#define IXP4XX_PERIPHERAL_BASE_PHYS	(0xC8000000)
+#define IXP4XX_EXP_CFG_BASE_PHYS	0xC4000000
-#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFFBEB000)
+#define IXP4XX_EXP_CFG_BASE_VIRT	0xFEF14000
-#define IXP4XX_PERIPHERAL_REGION_SIZE	(0x00013000)
+#define IXP4XX_EXP_CFG_REGION_SIZE	0x00001000
-
-/*
- * Debug UART
- *
- * This is basically a remap of UART1 into a region that is section
- * aligned so that it * can be used with the low-level debug code.
- */
-#define	IXP4XX_DEBUG_UART_BASE_PHYS	(0xC8000000)
-#define	IXP4XX_DEBUG_UART_BASE_VIRT	IOMEM(0xffb00000)
-#define	IXP4XX_DEBUG_UART_REGION_SIZE	(0x00001000)
 
 #define IXP4XX_EXP_CS0_OFFSET	0x00
 #define IXP4XX_EXP_CS1_OFFSET   0x04

arch/arm/mach-ixp4xx/include/mach/qmgr.h

@@ -86,7 +86,7 @@ void qmgr_release_queue(unsigned int queue);
 
 static inline void qmgr_put_entry(unsigned int queue, u32 val)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 #if DEBUG_QMGR
 	BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
 
@@ -99,7 +99,7 @@ static inline void qmgr_put_entry(unsigned int queue, u32 val)
 static inline u32 qmgr_get_entry(unsigned int queue)
 {
 	u32 val;
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	val = __raw_readl(&qmgr_regs->acc[queue][0]);
 #if DEBUG_QMGR
 	BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
@@ -112,14 +112,14 @@ static inline u32 qmgr_get_entry(unsigned int queue)
 
 static inline int __qmgr_get_stat1(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
 		>> ((queue & 7) << 2)) & 0xF;
 }
 
 static inline int __qmgr_get_stat2(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	BUG_ON(queue >= HALF_QUEUES);
 	return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
 		>> ((queue & 0xF) << 1)) & 0x3;
@@ -145,7 +145,7 @@ static inline int qmgr_stat_empty(unsigned int queue)
  */
 static inline int qmgr_stat_below_low_watermark(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	if (queue >= HALF_QUEUES)
 		return (__raw_readl(&qmgr_regs->statne_h) >>
 			(queue - HALF_QUEUES)) & 0x01;
@@ -172,7 +172,7 @@ static inline int qmgr_stat_above_high_watermark(unsigned int queue)
  */
 static inline int qmgr_stat_full(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	if (queue >= HALF_QUEUES)
 		return (__raw_readl(&qmgr_regs->statf_h) >>
 			(queue - HALF_QUEUES)) & 0x01;

arch/arm/mach-ixp4xx/ixp4xx_npe.c

@@ -116,7 +116,11 @@
 /* NPE mailbox_status value for reset */
 #define RESET_MBOX_STAT			0x0000F0F0
 
-const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" };
+#define NPE_A_FIRMWARE "NPE-A"
+#define NPE_B_FIRMWARE "NPE-B"
+#define NPE_C_FIRMWARE "NPE-C"
+
+const char *npe_names[] = { NPE_A_FIRMWARE, NPE_B_FIRMWARE, NPE_C_FIRMWARE };
 
 #define print_npe(pri, npe, fmt, ...)					\
 	printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
@@ -724,6 +728,9 @@ module_exit(npe_cleanup_module);
 
 MODULE_AUTHOR("Krzysztof Halasa");
 MODULE_LICENSE("GPL v2");
+MODULE_FIRMWARE(NPE_A_FIRMWARE);
+MODULE_FIRMWARE(NPE_B_FIRMWARE);
+MODULE_FIRMWARE(NPE_C_FIRMWARE);
 
 EXPORT_SYMBOL(npe_names);
 EXPORT_SYMBOL(npe_running);

arch/arm/mach-ixp4xx/ixp4xx_qmgr.c

@@ -14,7 +14,7 @@
 #include <linux/module.h>
 #include <mach/qmgr.h>
 
-struct qmgr_regs __iomem *qmgr_regs;
+static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 static struct resource *mem_res;
 static spinlock_t qmgr_lock;
 static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
@@ -293,12 +293,6 @@ static int qmgr_init(void)
 	if (mem_res == NULL)
 		return -EBUSY;
 
-	qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-	if (qmgr_regs == NULL) {
-		err = -ENOMEM;
-		goto error_map;
-	}
-
 	/* reset qmgr registers */
 	for (i = 0; i < 4; i++) {
 		__raw_writel(0x33333333, &qmgr_regs->stat1[i]);
@@ -347,8 +341,6 @@ static int qmgr_init(void)
 error_irq2:
 	free_irq(IRQ_IXP4XX_QM1, NULL);
 error_irq:
-	iounmap(qmgr_regs);
-error_map:
 	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
 	return err;
 }
@@ -359,7 +351,6 @@ static void qmgr_remove(void)
 	free_irq(IRQ_IXP4XX_QM2, NULL);
 	synchronize_irq(IRQ_IXP4XX_QM1);
 	synchronize_irq(IRQ_IXP4XX_QM2);
-	iounmap(qmgr_regs);
 	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
 }
 
@@ -369,7 +360,6 @@ module_exit(qmgr_remove);
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Krzysztof Halasa");
 
-EXPORT_SYMBOL(qmgr_regs);
 EXPORT_SYMBOL(qmgr_set_irq);
 EXPORT_SYMBOL(qmgr_enable_irq);
 EXPORT_SYMBOL(qmgr_disable_irq);

arch/arm/mach-kirkwood/pcie.c

@@ -207,14 +207,19 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
 static void __devinit rc_pci_fixup(struct pci_dev *dev)
 {
-	/*
-	 * Prevent enumeration of root complex.
-	 */
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
 		int i;
 
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			dev->resource[i].start = 0;
 			dev->resource[i].end   = 0;

arch/arm/mm/proc-v6.S

@@ -89,7 +89,7 @@ ENTRY(cpu_v6_dcache_clean_area)
 	mov	pc, lr
 
 /*
- *	cpu_arm926_switch_mm(pgd_phys, tsk)
+ *	cpu_v6_switch_mm(pgd_phys, tsk)
  *
  *	Set the translation table base pointer to be pgd_phys
  *

arch/arm/plat-s3c24xx/dma.c

@@ -473,12 +473,13 @@ int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 		pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
 			 chan->number, __func__, buf);
 
-		if (chan->end == NULL)
+		if (chan->end == NULL) {
 			pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
 				 chan->number, __func__, chan);
-
+		} else {
-		chan->end->next = buf;
+			chan->end->next = buf;
-		chan->end = buf;
+			chan->end = buf;
+		}
 	}
 
 	/* if necessary, update the next buffer field */

arch/arm64/include/asm/unistd32.h

@@ -392,7 +392,7 @@ __SYSCALL(367, sys_fanotify_init)
 __SYSCALL(368, compat_sys_fanotify_mark_wrapper)
 __SYSCALL(369, sys_prlimit64)
 __SYSCALL(370, sys_name_to_handle_at)
-__SYSCALL(371, sys_open_by_handle_at)
+__SYSCALL(371, compat_sys_open_by_handle_at)
 __SYSCALL(372, sys_clock_adjtime)
 __SYSCALL(373, sys_syncfs)
 

arch/c6x/include/asm/setup.h

@@ -0,0 +1,33 @@
+/*
+ *  Port on Texas Instruments TMS320C6x architecture
+ *
+ *  Copyright (C) 2004, 2009, 2010 2011 Texas Instruments Incorporated
+ *  Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+#ifndef _ASM_C6X_SETUP_H
+#define _ASM_C6X_SETUP_H
+
+#include <uapi/asm/setup.h>
+
+#ifndef __ASSEMBLY__
+extern char c6x_command_line[COMMAND_LINE_SIZE];
+
+extern int c6x_add_memory(phys_addr_t start, unsigned long size);
+
+extern unsigned long ram_start;
+extern unsigned long ram_end;
+
+extern int c6x_num_cores;
+extern unsigned int c6x_silicon_rev;
+extern unsigned int c6x_devstat;
+extern unsigned char c6x_fuse_mac[6];
+
+extern void machine_init(unsigned long dt_ptr);
+extern void time_init(void);
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_C6X_SETUP_H */

arch/c6x/include/uapi/asm/Kbuild

@@ -1,6 +1,8 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
+generic-y += kvm_para.h
+
 header-y += byteorder.h
 header-y += kvm_para.h
 header-y += ptrace.h

arch/c6x/include/uapi/asm/kvm_para.h

@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>

arch/c6x/include/uapi/asm/setup.h

@@ -1,33 +1,6 @@
-/*
+#ifndef _UAPI_ASM_C6X_SETUP_H
- *  Port on Texas Instruments TMS320C6x architecture
+#define _UAPI_ASM_C6X_SETUP_H
- *
- *  Copyright (C) 2004, 2009, 2010 2011 Texas Instruments Incorporated
- *  Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#ifndef _ASM_C6X_SETUP_H
-#define _ASM_C6X_SETUP_H
 
 #define COMMAND_LINE_SIZE   1024
 
-#ifndef __ASSEMBLY__
+#endif /* _UAPI_ASM_C6X_SETUP_H */
-extern char c6x_command_line[COMMAND_LINE_SIZE];
-
-extern int c6x_add_memory(phys_addr_t start, unsigned long size);
-
-extern unsigned long ram_start;
-extern unsigned long ram_end;
-
-extern int c6x_num_cores;
-extern unsigned int c6x_silicon_rev;
-extern unsigned int c6x_devstat;
-extern unsigned char c6x_fuse_mac[6];
-
-extern void machine_init(unsigned long dt_ptr);
-extern void time_init(void);
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_C6X_SETUP_H */

arch/c6x/kernel/entry.S

@@ -277,6 +277,8 @@ work_rescheduled:
  [A1]	BNOP	.S1	work_resched,5
 
 work_notifysig:
+	;; enable interrupts for do_notify_resume()
+	UNMASK_INT B2
 	B	.S2	do_notify_resume
 	LDW	.D2T1	*+SP(REGS__END+8),A6 ; syscall flag
 	ADDKPC	.S2	resume_userspace,B3,1
@@ -427,8 +429,7 @@ ENTRY(ret_from_kernel_execve)
 ENDPROC(ret_from_kernel_execve)
 
 	;;
-	;; These are the interrupt handlers, responsible for calling __do_IRQ()
+	;; These are the interrupt handlers, responsible for calling c6x_do_IRQ()
-	;; int6 is used for syscalls (see _system_call entry)
 	;;
 	.macro SAVE_ALL_INT
 	SAVE_ALL IRP,ITSR

arch/microblaze/kernel/signal.c

@@ -111,7 +111,7 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
 
 	/* It is more difficult to avoid calling this function than to
 	 call it and ignore errors. */
-	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1))
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1) == -EFAULT)
 		goto badframe;
 
 	return rval;

arch/mips/include/asm/hugetlb.h

@@ -95,7 +95,17 @@ static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
 					     pte_t *ptep, pte_t pte,
 					     int dirty)
 {
-	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+	int changed = !pte_same(*ptep, pte);
+
+	if (changed) {
+		set_pte_at(vma->vm_mm, addr, ptep, pte);
+		/*
+		 * There could be some standard sized pages in there,
+		 * get them all.
+		 */
+		flush_tlb_range(vma, addr, addr + HPAGE_SIZE);
+	}
+	return changed;
 }
 
 static inline pte_t huge_ptep_get(pte_t *ptep)

arch/mips/kernel/cpu-probe.c

@@ -510,7 +510,6 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 				c->cputype = CPU_R3000A;
 				__cpu_name[cpu] = "R3000A";
 			}
-			break;
 		} else {
 			c->cputype = CPU_R3000;
 			__cpu_name[cpu] = "R3000";

arch/mips/kernel/entry.S

@@ -36,6 +36,11 @@ FEXPORT(ret_from_exception)
 FEXPORT(ret_from_irq)
 	LONG_S	s0, TI_REGS($28)
 FEXPORT(__ret_from_irq)
+/*
+ * We can be coming here from a syscall done in the kernel space,
+ * e.g. a failed kernel_execve().
+ */
+resume_userspace_check:
 	LONG_L	t0, PT_STATUS(sp)		# returning to kernel mode?
 	andi	t0, t0, KU_USER
 	beqz	t0, resume_kernel
@@ -162,7 +167,7 @@ work_notifysig:				# deal with pending signals and
 	move	a0, sp
 	li	a1, 0
 	jal	do_notify_resume	# a2 already loaded
-	j	resume_userspace
+	j	resume_userspace_check
 
 FEXPORT(syscall_exit_partial)
 	local_irq_disable		# make sure need_resched doesn't

arch/mips/kernel/scall64-n32.S

@@ -397,14 +397,14 @@ EXPORT(sysn32_call_table)
 	PTR	sys_timerfd_create
 	PTR	compat_sys_timerfd_gettime	/* 6285 */
 	PTR	compat_sys_timerfd_settime
-	PTR	sys_signalfd4
+	PTR	compat_sys_signalfd4
 	PTR	sys_eventfd2
 	PTR	sys_epoll_create1
 	PTR	sys_dup3			/* 6290 */
 	PTR	sys_pipe2
 	PTR	sys_inotify_init1
-	PTR	sys_preadv
+	PTR	compat_sys_preadv
-	PTR	sys_pwritev
+	PTR	compat_sys_pwritev
 	PTR	compat_sys_rt_tgsigqueueinfo	/* 6295 */
 	PTR	sys_perf_event_open
 	PTR	sys_accept4

arch/mips/mm/tlb-r4k.c

@@ -120,18 +120,11 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 
 	if (cpu_context(cpu, mm) != 0) {
 		unsigned long size, flags;
-		int huge = is_vm_hugetlb_page(vma);
 
 		ENTER_CRITICAL(flags);
-		if (huge) {
+		start = round_down(start, PAGE_SIZE << 1);
-			start = round_down(start, HPAGE_SIZE);
+		end = round_up(end, PAGE_SIZE << 1);
-			end = round_up(end, HPAGE_SIZE);
+		size = (end - start) >> (PAGE_SHIFT + 1);
-			size = (end - start) >> HPAGE_SHIFT;
-		} else {
-			start = round_down(start, PAGE_SIZE << 1);
-			end = round_up(end, PAGE_SIZE << 1);
-			size = (end - start) >> (PAGE_SHIFT + 1);
-		}
 		if (size <= current_cpu_data.tlbsize/2) {
 			int oldpid = read_c0_entryhi();
 			int newpid = cpu_asid(cpu, mm);
@@ -140,10 +133,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 				int idx;
 
 				write_c0_entryhi(start | newpid);
-				if (huge)
+				start += (PAGE_SIZE << 1);
-					start += HPAGE_SIZE;
-				else
-					start += (PAGE_SIZE << 1);
 				mtc0_tlbw_hazard();
 				tlb_probe();
 				tlb_probe_hazard();

arch/openrisc/kernel/signal.c

@@ -84,7 +84,6 @@ asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs)
 {
 	struct rt_sigframe *frame = (struct rt_sigframe __user *)regs->sp;
 	sigset_t set;
-	stack_t st;
 
 	/*
 	 * Since we stacked the signal on a dword boundary,
@@ -104,11 +103,10 @@ asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs)
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
 
-	if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
-		goto badframe;
 	/* It is more difficult to avoid calling this function than to
 	   call it and ignore errors.  */
-	do_sigaltstack(&st, NULL, regs->sp);
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
+		goto badframe;
 
 	return regs->gpr[11];
 

arch/parisc/kernel/syscall_table.S

@@ -60,7 +60,7 @@
 	ENTRY_SAME(fork_wrapper)
 	ENTRY_SAME(read)
 	ENTRY_SAME(write)
-	ENTRY_SAME(open)		/* 5 */
+	ENTRY_COMP(open)		/* 5 */
 	ENTRY_SAME(close)
 	ENTRY_SAME(waitpid)
 	ENTRY_SAME(creat)

arch/s390/kernel/compat_wrapper.S

@@ -28,7 +28,7 @@ ENTRY(sys32_open_wrapper)
 	llgtr	%r2,%r2			# const char *
 	lgfr	%r3,%r3			# int
 	lgfr	%r4,%r4			# int
-	jg	sys_open		# branch to system call
+	jg	compat_sys_open		# branch to system call
 
 ENTRY(sys32_close_wrapper)
 	llgfr	%r2,%r2			# unsigned int

arch/score/kernel/signal.c

@@ -148,7 +148,6 @@ score_rt_sigreturn(struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
 	sigset_t set;
-	stack_t st;
 	int sig;
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -168,12 +167,10 @@ score_rt_sigreturn(struct pt_regs *regs)
 	else if (sig)
 		force_sig(sig, current);
 
-	if (__copy_from_user(&st, &frame->rs_uc.uc_stack, sizeof(st)))
-		goto badframe;
-
 	/* It is more difficult to avoid calling this function than to
 	   call it and ignore errors.  */
-	do_sigaltstack((stack_t __user *)&st, NULL, regs->regs[0]);
+	if (do_sigaltstack(&frame->rs_uc.uc_stack, NULL, regs->regs[0]) == -EFAULT)
+		goto badframe;
 	regs->is_syscall = 0;
 
 	__asm__ __volatile__(

arch/sh/kernel/signal_64.c

@@ -347,7 +347,6 @@ asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3,
 {
 	struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (long) REF_REG_SP;
 	sigset_t set;
-	stack_t __user st;
 	long long ret;
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -365,11 +364,10 @@ asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3,
 		goto badframe;
 	regs->pc -= 4;
 
-	if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
-		goto badframe;
 	/* It is more difficult to avoid calling this function than to
 	   call it and ignore errors.  */
-	do_sigaltstack(&st, NULL, REF_REG_SP);
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, REF_REG_SP) == -EFAULT)
+		goto badframe;
 
 	return (int) ret;
 

arch/sparc/boot/piggyback.c

@@ -81,18 +81,18 @@ static void usage(void)
 
 static int start_line(const char *line)
 {
-	if (strcmp(line + 8, " T _start\n") == 0)
+	if (strcmp(line + 10, " _start\n") == 0)
 		return 1;
-	else if (strcmp(line + 16, " T _start\n") == 0)
+	else if (strcmp(line + 18, " _start\n") == 0)
 		return 1;
 	return 0;
 }
 
 static int end_line(const char *line)
 {
-	if (strcmp(line + 8, " A _end\n") == 0)
+	if (strcmp(line + 10, " _end\n") == 0)
 		return 1;
-	else if (strcmp (line + 16, " A _end\n") == 0)
+	else if (strcmp (line + 18, " _end\n") == 0)
 		return 1;
 	return 0;
 }
@@ -100,8 +100,8 @@ static int end_line(const char *line)
 /*
  * Find address for start and end in System.map.
  * The file looks like this:
- * f0004000 T _start
+ * f0004000 ... _start
- * f0379f79 A _end
+ * f0379f79 ... _end
  * 1234567890123456
  * ^coloumn 1
  * There is support for 64 bit addresses too.

arch/sparc/kernel/sys32.S

@@ -47,7 +47,7 @@ STUB:	sra	REG1, 0, REG1; \
 	sra	REG4, 0, REG4
 
 SIGN1(sys32_exit, sparc_exit, %o0)
-SIGN1(sys32_exit_group, sys_exit_group, %o0)
+SIGN1(sys32_exit_group, sparc_exit_group, %o0)
 SIGN1(sys32_wait4, compat_sys_wait4, %o2)
 SIGN1(sys32_creat, sys_creat, %o1)
 SIGN1(sys32_mknod, sys_mknod, %o1)

arch/sparc/kernel/syscalls.S

@@ -118,10 +118,20 @@ ret_from_syscall:
 	ba,pt	%xcc, ret_sys_call
 	 ldx	[%sp + PTREGS_OFF + PT_V9_I0], %o0
 
+	.globl	sparc_exit_group
+	.type	sparc_exit_group,#function
+sparc_exit_group:
+	sethi	%hi(sys_exit_group), %g7
+	ba,pt	%xcc, 1f
+	 or	%g7, %lo(sys_exit_group), %g7
+	.size	sparc_exit_group,.-sparc_exit_group
+
 	.globl	sparc_exit
 	.type	sparc_exit,#function
 sparc_exit:
-	rdpr	%pstate, %g2
+	sethi	%hi(sys_exit), %g7
+	or	%g7, %lo(sys_exit), %g7
+1:	rdpr	%pstate, %g2
 	wrpr	%g2, PSTATE_IE, %pstate
 	rdpr	%otherwin, %g1
 	rdpr	%cansave, %g3
@@ -129,7 +139,7 @@ sparc_exit:
 	wrpr	%g3, 0x0, %cansave
 	wrpr	%g0, 0x0, %otherwin
 	wrpr	%g2, 0x0, %pstate
-	ba,pt	%xcc, sys_exit
+	jmpl	%g7, %g0
 	 stb	%g0, [%g6 + TI_WSAVED]
 	.size	sparc_exit,.-sparc_exit
 

arch/sparc/kernel/systbls_64.S

@@ -133,7 +133,7 @@ sys_call_table:
 /*170*/	.word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents
 	.word sys_setsid, sys_fchdir, sys_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/	.word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall
-	.word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_newuname
+	.word sys_setpgid, sys_fremovexattr, sys_tkill, sparc_exit_group, sys_newuname
 /*190*/	.word sys_init_module, sys_sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
 	.word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask
 /*200*/	.word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall

arch/um/kernel/exec.c

@@ -32,13 +32,14 @@ void flush_thread(void)
 		       "err = %d\n", ret);
 		force_sig(SIGKILL, current);
 	}
+	get_safe_registers(current_pt_regs()->regs.gp,
+			   current_pt_regs()->regs.fp);
 
 	__switch_mm(&current->mm->context.id);
 }
 
 void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp)
 {
-	get_safe_registers(regs->regs.gp, regs->regs.fp);
 	PT_REGS_IP(regs) = eip;
 	PT_REGS_SP(regs) = esp;
 	current->ptrace &= ~PT_DTRACE;

arch/x86/include/asm/Kbuild

@@ -12,6 +12,7 @@ header-y += mce.h
 header-y += msr-index.h
 header-y += msr.h
 header-y += mtrr.h
+header-y += perf_regs.h
 header-y += posix_types_32.h
 header-y += posix_types_64.h
 header-y += posix_types_x32.h
@@ -19,8 +20,10 @@ header-y += prctl.h
 header-y += processor-flags.h
 header-y += ptrace-abi.h
 header-y += sigcontext32.h
+header-y += svm.h
 header-y += ucontext.h
 header-y += vm86.h
+header-y += vmx.h
 header-y += vsyscall.h
 
 genhdr-y += unistd_32.h

arch/x86/include/asm/fpu-internal.h

@@ -399,14 +399,17 @@ static inline void drop_init_fpu(struct task_struct *tsk)
 typedef struct { int preload; } fpu_switch_t;
 
 /*
- * FIXME! We could do a totally lazy restore, but we need to
+ * Must be run with preemption disabled: this clears the fpu_owner_task,
- * add a per-cpu "this was the task that last touched the FPU
+ * on this CPU.
- * on this CPU" variable, and the task needs to have a "I last
- * touched the FPU on this CPU" and check them.
  *
- * We don't do that yet, so "fpu_lazy_restore()" always returns
+ * This will disable any lazy FPU state restore of the current FPU state,
- * false, but some day..
+ * but if the current thread owns the FPU, it will still be saved by.
  */
+static inline void __cpu_disable_lazy_restore(unsigned int cpu)
+{
+	per_cpu(fpu_owner_task, cpu) = NULL;
+}
+
 static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
 {
 	return new == this_cpu_read_stable(fpu_owner_task) &&

arch/x86/kernel/head_32.S

@@ -292,8 +292,8 @@ default_entry:
  *	be using the global pages. 
  *
  *	NOTE! If we are on a 486 we may have no cr4 at all!
- *	Specifically, cr4 exists if and only if CPUID exists,
+ *	Specifically, cr4 exists if and only if CPUID exists
- *	which in turn exists if and only if EFLAGS.ID exists.
+ *	and has flags other than the FPU flag set.
  */
 	movl $X86_EFLAGS_ID,%ecx
 	pushl %ecx
@@ -308,6 +308,11 @@ default_entry:
 	testl %ecx,%eax
 	jz 6f			# No ID flag = no CPUID = no CR4
 
+	movl $1,%eax
+	cpuid
+	andl $~1,%edx		# Ignore CPUID.FPU
+	jz 6f			# No flags or only CPUID.FPU = no CR4
+
 	movl pa(mmu_cr4_features),%eax
 	movl %eax,%cr4
 

arch/x86/kernel/ptrace.c

@@ -1541,6 +1541,13 @@ void syscall_trace_leave(struct pt_regs *regs)
 {
 	bool step;
 
+	/*
+	 * We may come here right after calling schedule_user()
+	 * or do_notify_resume(), in which case we can be in RCU
+	 * user mode.
+	 */
+	rcu_user_exit();
+
 	audit_syscall_exit(regs);
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))

arch/x86/kernel/smpboot.c

@@ -68,6 +68,8 @@
 #include <asm/mwait.h>
 #include <asm/apic.h>
 #include <asm/io_apic.h>
+#include <asm/i387.h>
+#include <asm/fpu-internal.h>
 #include <asm/setup.h>
 #include <asm/uv/uv.h>
 #include <linux/mc146818rtc.h>
@@ -818,6 +820,9 @@ int __cpuinit native_cpu_up(unsigned int cpu, struct task_struct *tidle)
 
 	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
 
+	/* the FPU context is blank, nobody can own it */
+	__cpu_disable_lazy_restore(cpu);
+
 	err = do_boot_cpu(apicid, cpu, tidle);
 	if (err) {
 		pr_debug("do_boot_cpu failed %d\n", err);

arch/x86/kvm/emulate.c

@@ -426,8 +426,7 @@ static void invalidate_registers(struct x86_emulate_ctxt *ctxt)
 			_ASM_EXTABLE(1b, 3b)				\
 			: "=m" ((ctxt)->eflags), "=&r" (_tmp),		\
 			  "+a" (*rax), "+d" (*rdx), "+qm"(_ex)		\
-			: "i" (EFLAGS_MASK), "m" ((ctxt)->src.val),	\
+			: "i" (EFLAGS_MASK), "m" ((ctxt)->src.val));	\
-			  "a" (*rax), "d" (*rdx));			\
 	} while (0)
 
 /* instruction has only one source operand, destination is implicit (e.g. mul, div, imul, idiv) */

drivers/atm/ambassador.c

@@ -1961,6 +1961,7 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
     res = loader_verify(lb, dev, rec);
     if (res)
       break;
+    rec = ihex_next_binrec(rec);
   }
   release_firmware(fw);
   if (!res)

drivers/char/hw_random/Kconfig

@@ -127,12 +127,12 @@ config HW_RANDOM_VIA
 	  If unsure, say Y.
 
 config HW_RANDOM_IXP4XX
-	tristate "Intel IXP4xx NPU HW Random Number Generator support"
+	tristate "Intel IXP4xx NPU HW Pseudo-Random Number Generator support"
 	depends on HW_RANDOM && ARCH_IXP4XX
 	default HW_RANDOM
 	---help---
-	  This driver provides kernel-side support for the Random
+	  This driver provides kernel-side support for the Pseudo-Random
-	  Number Generator hardware found on the Intel IXP4xx NPU.
+	  Number Generator hardware found on the Intel IXP45x/46x NPU.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ixp4xx-rng.

drivers/char/hw_random/ixp4xx-rng.c

@@ -45,6 +45,9 @@ static int __init ixp4xx_rng_init(void)
 	void __iomem * rng_base;
 	int err;
 
+	if (!cpu_is_ixp46x()) /* includes IXP455 */
+		return -ENOSYS;
+
 	rng_base = ioremap(0x70002100, 4);
 	if (!rng_base)
 		return -ENOMEM;
@@ -68,5 +71,5 @@ module_init(ixp4xx_rng_init);
 module_exit(ixp4xx_rng_exit);
 
 MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
-MODULE_DESCRIPTION("H/W Random Number Generator (RNG) driver for IXP4xx");
+MODULE_DESCRIPTION("H/W Pseudo-Random Number Generator (RNG) driver for IXP45x/46x");
 MODULE_LICENSE("GPL");

drivers/char/raw.c

@@ -285,7 +285,7 @@ static long raw_ctl_compat_ioctl(struct file *file, unsigned int cmd,
 
 static const struct file_operations raw_fops = {
 	.read		= do_sync_read,
-	.aio_read	= blkdev_aio_read,
+	.aio_read	= generic_file_aio_read,
 	.write		= do_sync_write,
 	.aio_write	= blkdev_aio_write,
 	.fsync		= blkdev_fsync,

drivers/crypto/Kconfig

@@ -224,7 +224,7 @@ config CRYPTO_DEV_TALITOS
 
 config CRYPTO_DEV_IXP4XX
 	tristate "Driver for IXP4xx crypto hardware acceleration"
-	depends on ARCH_IXP4XX
+	depends on ARCH_IXP4XX && IXP4XX_QMGR && IXP4XX_NPE
 	select CRYPTO_DES
 	select CRYPTO_ALGAPI
 	select CRYPTO_AUTHENC

drivers/crypto/ixp4xx_crypto.c

@@ -750,12 +750,12 @@ static int setup_cipher(struct crypto_tfm *tfm, int encrypt,
 	}
 	if (cipher_cfg & MOD_AES) {
 		switch (key_len) {
-			case 16: keylen_cfg = MOD_AES128 | KEYLEN_128; break;
+		case 16: keylen_cfg = MOD_AES128; break;
-			case 24: keylen_cfg = MOD_AES192 | KEYLEN_192; break;
+		case 24: keylen_cfg = MOD_AES192; break;
-			case 32: keylen_cfg = MOD_AES256 | KEYLEN_256; break;
+		case 32: keylen_cfg = MOD_AES256; break;
-			default:
+		default:
-				*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+			*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
-				return -EINVAL;
+			return -EINVAL;
 		}
 		cipher_cfg |= keylen_cfg;
 	} else if (cipher_cfg & MOD_3DES) {

drivers/edac/edac_mc.c

@@ -416,10 +416,18 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num,
 		dimm->cschannel = chn;
 
 		/* Increment csrow location */
-		row++;
+		if (layers[0].is_virt_csrow) {
-		if (row == tot_csrows) {
-			row = 0;
 			chn++;
+			if (chn == tot_channels) {
+				chn = 0;
+				row++;
+			}
+		} else {
+			row++;
+			if (row == tot_csrows) {
+				row = 0;
+				chn++;
+			}
 		}
 
 		/* Increment dimm location */

drivers/edac/i7300_edac.c

@@ -197,8 +197,8 @@ static const char *ferr_fat_fbd_name[] = {
 	[0]  = "Memory Write error on non-redundant retry or "
 	       "FBD configuration Write error on retry",
 };
-#define GET_FBD_FAT_IDX(fbderr)	(fbderr & (3 << 28))
+#define GET_FBD_FAT_IDX(fbderr)	(((fbderr) >> 28) & 3)
-#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3))
+#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 22))
 
 #define FERR_NF_FBD	0xa0
 static const char *ferr_nf_fbd_name[] = {
@@ -225,7 +225,7 @@ static const char *ferr_nf_fbd_name[] = {
 	[1]  = "Aliased Uncorrectable Non-Mirrored Demand Data ECC",
 	[0]  = "Uncorrectable Data ECC on Replay",
 };
-#define GET_FBD_NF_IDX(fbderr)	(fbderr & (3 << 28))
+#define GET_FBD_NF_IDX(fbderr)	(((fbderr) >> 28) & 3)
 #define FERR_NF_FBD_ERR_MASK ((1 << 24) | (1 << 23) | (1 << 22) | (1 << 21) |\
 			      (1 << 18) | (1 << 17) | (1 << 16) | (1 << 15) |\
 			      (1 << 14) | (1 << 13) | (1 << 11) | (1 << 10) |\
@@ -464,7 +464,7 @@ static void i7300_process_fbd_error(struct mem_ctl_info *mci)
 		errnum = find_first_bit(&errors,
 					ARRAY_SIZE(ferr_nf_fbd_name));
 		specific = GET_ERR_FROM_TABLE(ferr_nf_fbd_name, errnum);
-		branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0;
+		branch = (GET_FBD_NF_IDX(error_reg) == 2) ? 1 : 0;
 
 		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
 			REDMEMA, &syndrome);

drivers/edac/i7core_edac.c

@@ -816,7 +816,7 @@ static ssize_t i7core_inject_store_##param(			\
 	struct device_attribute *mattr,				\
 	const char *data, size_t count)				\
 {								\
-	struct mem_ctl_info *mci = to_mci(dev);			\
+	struct mem_ctl_info *mci = dev_get_drvdata(dev);	\
 	struct i7core_pvt *pvt;					\
 	long value;						\
 	int rc;							\
@@ -845,7 +845,7 @@ static ssize_t i7core_inject_show_##param(			\
 	struct device_attribute *mattr,				\
 	char *data)						\
 {								\
-	struct mem_ctl_info *mci = to_mci(dev);			\
+	struct mem_ctl_info *mci = dev_get_drvdata(dev);	\
 	struct i7core_pvt *pvt;					\
 								\
 	pvt = mci->pvt_info;					\
@@ -1052,7 +1052,7 @@ static ssize_t i7core_show_counter_##param(			\
 	struct device_attribute *mattr,				\
 	char *data)						\
 {								\
-	struct mem_ctl_info *mci = to_mci(dev);			\
+	struct mem_ctl_info *mci = dev_get_drvdata(dev);	\
 	struct i7core_pvt *pvt = mci->pvt_info;			\
 								\
 	edac_dbg(1, "\n");					\

drivers/edac/i82975x_edac.c

@@ -370,10 +370,6 @@ static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank)
 static void i82975x_init_csrows(struct mem_ctl_info *mci,
 		struct pci_dev *pdev, void __iomem *mch_window)
 {
-	static const char *labels[4] = {
-							"DIMM A1", "DIMM A2",
-							"DIMM B1", "DIMM B2"
-						};
 	struct csrow_info *csrow;
 	unsigned long last_cumul_size;
 	u8 value;
@@ -423,9 +419,10 @@ static void i82975x_init_csrows(struct mem_ctl_info *mci,
 			dimm = mci->csrows[index]->channels[chan]->dimm;
 
 			dimm->nr_pages = nr_pages / csrow->nr_channels;
-			strncpy(csrow->channels[chan]->dimm->label,
+
-					labels[(index >> 1) + (chan * 2)],
+			snprintf(csrow->channels[chan]->dimm->label, EDAC_MC_LABEL_LEN, "DIMM %c%d",
-					EDAC_MC_LABEL_LEN);
+				 (chan == 0) ? 'A' : 'B',
+				 index);
 			dimm->grain = 1 << 7;	/* 128Byte cache-line resolution */
 			dimm->dtype = i82975x_dram_type(mch_window, index);
 			dimm->mtype = MEM_DDR2; /* I82975x supports only DDR2 */

drivers/gpu/drm/exynos/exynos_drm_encoder.c

@@ -226,6 +226,12 @@ static void exynos_drm_encoder_commit(struct drm_encoder *encoder)
 	 * already updated or not by exynos_drm_encoder_dpms function.
 	 */
 	exynos_encoder->updated = true;
+
+	/*
+	 * In case of setcrtc, there is no way to update encoder's dpms
+	 * so update it here.
+	 */
+	exynos_encoder->dpms = DRM_MODE_DPMS_ON;
 }
 
 static void exynos_drm_encoder_disable(struct drm_encoder *encoder)
@@ -507,6 +513,6 @@ void exynos_drm_encoder_plane_disable(struct drm_encoder *encoder, void *data)
 	 * because the setting for disabling the overlay will be updated
 	 * at vsync.
 	 */
-	if (overlay_ops->wait_for_vblank)
+	if (overlay_ops && overlay_ops->wait_for_vblank)
 		overlay_ops->wait_for_vblank(manager->dev);
 }

drivers/gpu/drm/exynos/exynos_drm_fbdev.c

@@ -87,7 +87,8 @@ static int exynos_drm_fbdev_update(struct drm_fb_helper *helper,
 
 	dev->mode_config.fb_base = (resource_size_t)buffer->dma_addr;
 	fbi->screen_base = buffer->kvaddr + offset;
-	fbi->fix.smem_start = (unsigned long)(buffer->dma_addr + offset);
+	fbi->fix.smem_start = (unsigned long)(page_to_phys(buffer->pages[0]) +
+				offset);
 	fbi->screen_size = size;
 	fbi->fix.smem_len = size;
 

drivers/gpu/drm/exynos/exynos_drm_fimd.c

@@ -61,11 +61,11 @@ struct fimd_driver_data {
 	unsigned int timing_base;
 };
 
-struct fimd_driver_data exynos4_fimd_driver_data = {
+static struct fimd_driver_data exynos4_fimd_driver_data = {
 	.timing_base = 0x0,
 };
 
-struct fimd_driver_data exynos5_fimd_driver_data = {
+static struct fimd_driver_data exynos5_fimd_driver_data = {
 	.timing_base = 0x20000,
 };
 

drivers/gpu/drm/exynos/exynos_drm_plane.c

@@ -204,7 +204,6 @@ exynos_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 		return ret;
 
 	plane->crtc = crtc;
-	plane->fb = crtc->fb;
 
 	exynos_plane_commit(plane);
 	exynos_plane_dpms(plane, DRM_MODE_DPMS_ON);

drivers/gpu/drm/i915/i915_gem.c

@@ -1796,7 +1796,7 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj)
 	 */
 	mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
 	gfp = mapping_gfp_mask(mapping);
-	gfp |= __GFP_NORETRY | __GFP_NOWARN;
+	gfp |= __GFP_NORETRY | __GFP_NOWARN | __GFP_NO_KSWAPD;
 	gfp &= ~(__GFP_IO | __GFP_WAIT);
 	for_each_sg(st->sgl, sg, page_count, i) {
 		page = shmem_read_mapping_page_gfp(mapping, i, gfp);
@@ -1809,7 +1809,7 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj)
 			 * our own buffer, now let the real VM do its job and
 			 * go down in flames if truly OOM.
 			 */
-			gfp &= ~(__GFP_NORETRY | __GFP_NOWARN);
+			gfp &= ~(__GFP_NORETRY | __GFP_NOWARN | __GFP_NO_KSWAPD);
 			gfp |= __GFP_IO | __GFP_WAIT;
 
 			i915_gem_shrink_all(dev_priv);
@@ -1817,7 +1817,7 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj)
 			if (IS_ERR(page))
 				goto err_pages;
 
-			gfp |= __GFP_NORETRY | __GFP_NOWARN;
+			gfp |= __GFP_NORETRY | __GFP_NOWARN | __GFP_NO_KSWAPD;
 			gfp &= ~(__GFP_IO | __GFP_WAIT);
 		}
 

drivers/gpu/drm/i915/intel_bios.c

@@ -499,12 +499,8 @@ parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
 
 	edp = find_section(bdb, BDB_EDP);
 	if (!edp) {
-		if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support) {
+		if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support)
-			DRM_DEBUG_KMS("No eDP BDB found but eDP panel "
+			DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported.\n");
-				      "supported, assume %dbpp panel color "
-				      "depth.\n",
-				      dev_priv->edp.bpp);
-		}
 		return;
 	}
 
@@ -657,9 +653,6 @@ init_vbt_defaults(struct drm_i915_private *dev_priv)
 	dev_priv->lvds_use_ssc = 1;
 	dev_priv->lvds_ssc_freq = intel_bios_ssc_frequency(dev, 1);
 	DRM_DEBUG_KMS("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq);
-
-	/* eDP data */
-	dev_priv->edp.bpp = 18;
 }
 
 static int __init intel_no_opregion_vbt_callback(const struct dmi_system_id *id)

drivers/gpu/drm/i915/intel_display.c

@@ -3845,7 +3845,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
 			/* Use VBT settings if we have an eDP panel */
 			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
 
-			if (edp_bpc < display_bpc) {
+			if (edp_bpc && edp_bpc < display_bpc) {
 				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
 				display_bpc = edp_bpc;
 			}

drivers/gpu/drm/i915/intel_pm.c

@@ -2373,15 +2373,9 @@ int intel_enable_rc6(const struct drm_device *dev)
 	if (i915_enable_rc6 >= 0)
 		return i915_enable_rc6;
 
-	if (INTEL_INFO(dev)->gen == 5) {
+	/* Disable RC6 on Ironlake */
-#ifdef CONFIG_INTEL_IOMMU
+	if (INTEL_INFO(dev)->gen == 5)
-		/* Disable rc6 on ilk if VT-d is on. */
+		return 0;
-		if (intel_iommu_gfx_mapped)
-			return false;
-#endif
-		DRM_DEBUG_DRIVER("Ironlake: only RC6 available\n");
-		return INTEL_RC6_ENABLE;
-	}
 
 	if (IS_HASWELL(dev)) {
 		DRM_DEBUG_DRIVER("Haswell: only RC6 available\n");

drivers/gpu/drm/i915/intel_sdvo.c

@@ -2201,7 +2201,6 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
 		connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
 		intel_sdvo->is_hdmi = true;
 	}
-	intel_sdvo->base.cloneable = true;
 
 	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
 	if (intel_sdvo->is_hdmi)
@@ -2232,7 +2231,6 @@ intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type)
 
 	intel_sdvo->is_tv = true;
 	intel_sdvo->base.needs_tv_clock = true;
-	intel_sdvo->base.cloneable = false;
 
 	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
 
@@ -2275,8 +2273,6 @@ intel_sdvo_analog_init(struct intel_sdvo *intel_sdvo, int device)
 		intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB1;
 	}
 
-	intel_sdvo->base.cloneable = true;
-
 	intel_sdvo_connector_init(intel_sdvo_connector,
 				  intel_sdvo);
 	return true;
@@ -2307,9 +2303,6 @@ intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device)
 		intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1;
 	}
 
-	/* SDVO LVDS is not cloneable because the input mode gets adjusted by the encoder */
-	intel_sdvo->base.cloneable = false;
-
 	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
 	if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector))
 		goto err;
@@ -2721,6 +2714,16 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 		goto err_output;
 	}
 
+	/*
+	 * Cloning SDVO with anything is often impossible, since the SDVO
+	 * encoder can request a special input timing mode. And even if that's
+	 * not the case we have evidence that cloning a plain unscaled mode with
+	 * VGA doesn't really work. Furthermore the cloning flags are way too
+	 * simplistic anyway to express such constraints, so just give up on
+	 * cloning for SDVO encoders.
+	 */
+	intel_sdvo->base.cloneable = false;
+
 	/* Only enable the hotplug irq if we need it, to work around noisy
 	 * hotplug lines.
 	 */

drivers/gpu/drm/radeon/atombios_crtc.c

@@ -1696,42 +1696,22 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc)
 			return ATOM_PPLL2;
 		DRM_ERROR("unable to allocate a PPLL\n");
 		return ATOM_PPLL_INVALID;
-	} else if (ASIC_IS_AVIVO(rdev)) {
-		/* in DP mode, the DP ref clock can come from either PPLL
-		 * depending on the asic:
-		 * DCE3: PPLL1 or PPLL2
-		 */
-		if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(radeon_crtc->encoder))) {
-			/* use the same PPLL for all DP monitors */
-			pll = radeon_get_shared_dp_ppll(crtc);
-			if (pll != ATOM_PPLL_INVALID)
-				return pll;
-		} else {
-			/* use the same PPLL for all monitors with the same clock */
-			pll = radeon_get_shared_nondp_ppll(crtc);
-			if (pll != ATOM_PPLL_INVALID)
-				return pll;
-		}
-		/* all other cases */
-		pll_in_use = radeon_get_pll_use_mask(crtc);
-		/* the order shouldn't matter here, but we probably
-		 * need this until we have atomic modeset
-		 */
-		if (rdev->flags & RADEON_IS_IGP) {
-			if (!(pll_in_use & (1 << ATOM_PPLL1)))
-				return ATOM_PPLL1;
-			if (!(pll_in_use & (1 << ATOM_PPLL2)))
-				return ATOM_PPLL2;
-		} else {
-			if (!(pll_in_use & (1 << ATOM_PPLL2)))
-				return ATOM_PPLL2;
-			if (!(pll_in_use & (1 << ATOM_PPLL1)))
-				return ATOM_PPLL1;
-		}
-		DRM_ERROR("unable to allocate a PPLL\n");
-		return ATOM_PPLL_INVALID;
 	} else {
 		/* on pre-R5xx asics, the crtc to pll mapping is hardcoded */
+		/* some atombios (observed in some DCE2/DCE3) code have a bug,
+		 * the matching btw pll and crtc is done through
+		 * PCLK_CRTC[1|2]_CNTL (0x480/0x484) but atombios code use the
+		 * pll (1 or 2) to select which register to write. ie if using
+		 * pll1 it will use PCLK_CRTC1_CNTL (0x480) and if using pll2
+		 * it will use PCLK_CRTC2_CNTL (0x484), it then use crtc id to
+		 * choose which value to write. Which is reverse order from
+		 * register logic. So only case that works is when pllid is
+		 * same as crtcid or when both pll and crtc are enabled and
+		 * both use same clock.
+		 *
+		 * So just return crtc id as if crtc and pll were hard linked
+		 * together even if they aren't
+		 */
 		return radeon_crtc->crtc_id;
 	}
 }

drivers/input/matrix-keymap.c

@@ -23,6 +23,7 @@
 #include <linux/input.h>
 #include <linux/of.h>
 #include <linux/export.h>
+#include <linux/module.h>
 #include <linux/input/matrix_keypad.h>
 
 static bool matrix_keypad_map_key(struct input_dev *input_dev,
@@ -161,3 +162,5 @@ int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
 	return 0;
 }
 EXPORT_SYMBOL(matrix_keypad_build_keymap);
+
+MODULE_LICENSE("GPL");

drivers/md/raid1.c

@@ -963,7 +963,7 @@ static void raid1_unplug(struct blk_plug_cb *cb, bool from_schedule)
 	struct r1conf *conf = mddev->private;
 	struct bio *bio;
 
-	if (from_schedule) {
+	if (from_schedule || current->bio_list) {
 		spin_lock_irq(&conf->device_lock);
 		bio_list_merge(&conf->pending_bio_list, &plug->pending);
 		conf->pending_count += plug->pending_cnt;

drivers/md/raid10.c

@@ -1069,7 +1069,7 @@ static void raid10_unplug(struct blk_plug_cb *cb, bool from_schedule)
 	struct r10conf *conf = mddev->private;
 	struct bio *bio;
 
-	if (from_schedule) {
+	if (from_schedule || current->bio_list) {
 		spin_lock_irq(&conf->device_lock);
 		bio_list_merge(&conf->pending_bio_list, &plug->pending);
 		conf->pending_count += plug->pending_cnt;

drivers/media/dvb-frontends/stv0900_core.c

@@ -300,15 +300,15 @@ static enum fe_stv0900_error stv0900_set_mclk(struct stv0900_internal *intp, u32
 {
 	u32 m_div, clk_sel;
 
-	dprintk("%s: Mclk set to %d, Quartz = %d\n", __func__, mclk,
-			intp->quartz);
-
 	if (intp == NULL)
 		return STV0900_INVALID_HANDLE;
 
 	if (intp->errs)
 		return STV0900_I2C_ERROR;
 
+	dprintk("%s: Mclk set to %d, Quartz = %d\n", __func__, mclk,
+			intp->quartz);
+
 	clk_sel = ((stv0900_get_bits(intp, F0900_SELX1RATIO) == 1) ? 4 : 6);
 	m_div = ((clk_sel * mclk) / intp->quartz) - 1;
 	stv0900_write_bits(intp, F0900_M_DIV, m_div);

drivers/media/i2c/adv7604.c

@@ -53,8 +53,7 @@ MODULE_LICENSE("GPL");
 /* ADV7604 system clock frequency */
 #define ADV7604_fsc (28636360)
 
-#define DIGITAL_INPUT ((state->prim_mode == ADV7604_PRIM_MODE_HDMI_COMP) || \
+#define DIGITAL_INPUT (state->mode == ADV7604_MODE_HDMI)
-			(state->prim_mode == ADV7604_PRIM_MODE_HDMI_GR))
 
 /*
  **********************************************************************
@@ -68,7 +67,7 @@ struct adv7604_state {
 	struct v4l2_subdev sd;
 	struct media_pad pad;
 	struct v4l2_ctrl_handler hdl;
-	enum adv7604_prim_mode prim_mode;
+	enum adv7604_mode mode;
 	struct v4l2_dv_timings timings;
 	u8 edid[256];
 	unsigned edid_blocks;
@@ -77,6 +76,7 @@ struct adv7604_state {
 	struct workqueue_struct *work_queues;
 	struct delayed_work delayed_work_enable_hotplug;
 	bool connector_hdmi;
+	bool restart_stdi_once;
 
 	/* i2c clients */
 	struct i2c_client *i2c_avlink;
@@ -106,7 +106,6 @@ static const struct v4l2_dv_timings adv7604_timings[] = {
 	V4L2_DV_BT_CEA_720X576P50,
 	V4L2_DV_BT_CEA_1280X720P24,
 	V4L2_DV_BT_CEA_1280X720P25,
-	V4L2_DV_BT_CEA_1280X720P30,
 	V4L2_DV_BT_CEA_1280X720P50,
 	V4L2_DV_BT_CEA_1280X720P60,
 	V4L2_DV_BT_CEA_1920X1080P24,
@@ -115,6 +114,7 @@ static const struct v4l2_dv_timings adv7604_timings[] = {
 	V4L2_DV_BT_CEA_1920X1080P50,
 	V4L2_DV_BT_CEA_1920X1080P60,
 
+	/* sorted by DMT ID */
 	V4L2_DV_BT_DMT_640X350P85,
 	V4L2_DV_BT_DMT_640X400P85,
 	V4L2_DV_BT_DMT_720X400P85,
@@ -164,6 +164,89 @@ static const struct v4l2_dv_timings adv7604_timings[] = {
 	{ },
 };
 
+struct adv7604_video_standards {
+	struct v4l2_dv_timings timings;
+	u8 vid_std;
+	u8 v_freq;
+};
+
+/* sorted by number of lines */
+static const struct adv7604_video_standards adv7604_prim_mode_comp[] = {
+	/* { V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 }, TODO flickering */
+	{ V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 },
+	{ V4L2_DV_BT_CEA_1280X720P50, 0x19, 0x01 },
+	{ V4L2_DV_BT_CEA_1280X720P60, 0x19, 0x00 },
+	{ V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 },
+	{ V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 },
+	{ V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 },
+	{ V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 },
+	{ V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 },
+	/* TODO add 1920x1080P60_RB (CVT timing) */
+	{ },
+};
+
+/* sorted by number of lines */
+static const struct adv7604_video_standards adv7604_prim_mode_gr[] = {
+	{ V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 },
+	{ V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 },
+	{ V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 },
+	{ V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 },
+	{ V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 },
+	{ V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 },
+	{ V4L2_DV_BT_DMT_1360X768P60, 0x12, 0x00 },
+	{ V4L2_DV_BT_DMT_1366X768P60, 0x13, 0x00 },
+	{ V4L2_DV_BT_DMT_1400X1050P60, 0x14, 0x00 },
+	{ V4L2_DV_BT_DMT_1400X1050P75, 0x15, 0x00 },
+	{ V4L2_DV_BT_DMT_1600X1200P60, 0x16, 0x00 }, /* TODO not tested */
+	/* TODO add 1600X1200P60_RB (not a DMT timing) */
+	{ V4L2_DV_BT_DMT_1680X1050P60, 0x18, 0x00 },
+	{ V4L2_DV_BT_DMT_1920X1200P60_RB, 0x19, 0x00 }, /* TODO not tested */
+	{ },
+};
+
+/* sorted by number of lines */
+static const struct adv7604_video_standards adv7604_prim_mode_hdmi_comp[] = {
+	{ V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 },
+	{ V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 },
+	{ V4L2_DV_BT_CEA_1280X720P50, 0x13, 0x01 },
+	{ V4L2_DV_BT_CEA_1280X720P60, 0x13, 0x00 },
+	{ V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 },
+	{ V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 },
+	{ V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 },
+	{ V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 },
+	{ V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 },
+	{ },
+};
+
+/* sorted by number of lines */
+static const struct adv7604_video_standards adv7604_prim_mode_hdmi_gr[] = {
+	{ V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 },
+	{ V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 },
+	{ V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 },
+	{ V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 },
+	{ V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 },
+	{ V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 },
+	{ },
+};
+
 /* ----------------------------------------------------------------------- */
 
 static inline struct adv7604_state *to_state(struct v4l2_subdev *sd)
@@ -672,64 +755,144 @@ static int adv7604_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd)
 				((io_read(sd, 0x6f) & 0x10) >> 4));
 }
 
-static void configure_free_run(struct v4l2_subdev *sd, const struct v4l2_bt_timings *timings)
+static int find_and_set_predefined_video_timings(struct v4l2_subdev *sd,
+		u8 prim_mode,
+		const struct adv7604_video_standards *predef_vid_timings,
+		const struct v4l2_dv_timings *timings)
 {
+	struct adv7604_state *state = to_state(sd);
+	int i;
+
+	for (i = 0; predef_vid_timings[i].timings.bt.width; i++) {
+		if (!v4l_match_dv_timings(timings, &predef_vid_timings[i].timings,
+					DIGITAL_INPUT ? 250000 : 1000000))
+			continue;
+		io_write(sd, 0x00, predef_vid_timings[i].vid_std); /* video std */
+		io_write(sd, 0x01, (predef_vid_timings[i].v_freq << 4) +
+				prim_mode); /* v_freq and prim mode */
+		return 0;
+	}
+
+	return -1;
+}
+
+static int configure_predefined_video_timings(struct v4l2_subdev *sd,
+		struct v4l2_dv_timings *timings)
+{
+	struct adv7604_state *state = to_state(sd);
+	int err;
+
+	v4l2_dbg(1, debug, sd, "%s", __func__);
+
+	/* reset to default values */
+	io_write(sd, 0x16, 0x43);
+	io_write(sd, 0x17, 0x5a);
+	/* disable embedded syncs for auto graphics mode */
+	cp_write_and_or(sd, 0x81, 0xef, 0x00);
+	cp_write(sd, 0x8f, 0x00);
+	cp_write(sd, 0x90, 0x00);
+	cp_write(sd, 0xa2, 0x00);
+	cp_write(sd, 0xa3, 0x00);
+	cp_write(sd, 0xa4, 0x00);
+	cp_write(sd, 0xa5, 0x00);
+	cp_write(sd, 0xa6, 0x00);
+	cp_write(sd, 0xa7, 0x00);
+	cp_write(sd, 0xab, 0x00);
+	cp_write(sd, 0xac, 0x00);
+
+	switch (state->mode) {
+	case ADV7604_MODE_COMP:
+	case ADV7604_MODE_GR:
+		err = find_and_set_predefined_video_timings(sd,
+				0x01, adv7604_prim_mode_comp, timings);
+		if (err)
+			err = find_and_set_predefined_video_timings(sd,
+					0x02, adv7604_prim_mode_gr, timings);
+		break;
+	case ADV7604_MODE_HDMI:
+		err = find_and_set_predefined_video_timings(sd,
+				0x05, adv7604_prim_mode_hdmi_comp, timings);
+		if (err)
+			err = find_and_set_predefined_video_timings(sd,
+					0x06, adv7604_prim_mode_hdmi_gr, timings);
+		break;
+	default:
+		v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n",
+				__func__, state->mode);
+		err = -1;
+		break;
+	}
+
+
+	return err;
+}
+
+static void configure_custom_video_timings(struct v4l2_subdev *sd,
+		const struct v4l2_bt_timings *bt)
+{
+	struct adv7604_state *state = to_state(sd);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u32 width = htotal(timings);
+	u32 width = htotal(bt);
-	u32 height = vtotal(timings);
+	u32 height = vtotal(bt);
-	u16 ch1_fr_ll = (((u32)timings->pixelclock / 100) > 0) ?
+	u16 cp_start_sav = bt->hsync + bt->hbackporch - 4;
-		((width * (ADV7604_fsc / 100)) / ((u32)timings->pixelclock / 100)) : 0;
+	u16 cp_start_eav = width - bt->hfrontporch;
+	u16 cp_start_vbi = height - bt->vfrontporch;
+	u16 cp_end_vbi = bt->vsync + bt->vbackporch;
+	u16 ch1_fr_ll = (((u32)bt->pixelclock / 100) > 0) ?
+		((width * (ADV7604_fsc / 100)) / ((u32)bt->pixelclock / 100)) : 0;
+	const u8 pll[2] = {
+		0xc0 | ((width >> 8) & 0x1f),
+		width & 0xff
+	};
 
 	v4l2_dbg(2, debug, sd, "%s\n", __func__);
 
-	cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7);	/* CH1_FR_LL */
+	switch (state->mode) {
-	cp_write(sd, 0x90, ch1_fr_ll & 0xff);		/* CH1_FR_LL */
+	case ADV7604_MODE_COMP:
-	cp_write(sd, 0xab, (height >> 4) & 0xff); /* CP_LCOUNT_MAX */
+	case ADV7604_MODE_GR:
-	cp_write(sd, 0xac, (height & 0x0f) << 4); /* CP_LCOUNT_MAX */
+		/* auto graphics */
-	/* TODO support interlaced */
+		io_write(sd, 0x00, 0x07); /* video std */
-	cp_write(sd, 0x91, 0x10);	/* INTERLACED */
+		io_write(sd, 0x01, 0x02); /* prim mode */
-
+		/* enable embedded syncs for auto graphics mode */
-	/* Should only be set in auto-graphics mode [REF_02 p. 91-92] */
+		cp_write_and_or(sd, 0x81, 0xef, 0x10);
-	if ((io_read(sd, 0x00) == 0x07) && (io_read(sd, 0x01) == 0x02)) {
-		u16 cp_start_sav, cp_start_eav, cp_start_vbi, cp_end_vbi;
-		const u8 pll[2] = {
-			(0xc0 | ((width >> 8) & 0x1f)),
-			(width & 0xff)
-		};
 
+		/* Should only be set in auto-graphics mode [REF_02, p. 91-92] */
 		/* setup PLL_DIV_MAN_EN and PLL_DIV_RATIO */
 		/* IO-map reg. 0x16 and 0x17 should be written in sequence */
 		if (adv_smbus_write_i2c_block_data(client, 0x16, 2, pll)) {
 			v4l2_err(sd, "writing to reg 0x16 and 0x17 failed\n");
-			return;
+			break;
 		}
 
 		/* active video - horizontal timing */
-		cp_start_sav = timings->hsync + timings->hbackporch - 4;
-		cp_start_eav = width - timings->hfrontporch;
 		cp_write(sd, 0xa2, (cp_start_sav >> 4) & 0xff);
-		cp_write(sd, 0xa3, ((cp_start_sav & 0x0f) << 4) | ((cp_start_eav >> 8) & 0x0f));
+		cp_write(sd, 0xa3, ((cp_start_sav & 0x0f) << 4) |
+					((cp_start_eav >> 8) & 0x0f));
 		cp_write(sd, 0xa4, cp_start_eav & 0xff);
 
 		/* active video - vertical timing */
-		cp_start_vbi = height - timings->vfrontporch;
-		cp_end_vbi = timings->vsync + timings->vbackporch;
 		cp_write(sd, 0xa5, (cp_start_vbi >> 4) & 0xff);
-		cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) | ((cp_end_vbi >> 8) & 0xf));
+		cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) |
+					((cp_end_vbi >> 8) & 0xf));
 		cp_write(sd, 0xa7, cp_end_vbi & 0xff);
-	} else {
+		break;
-		/* reset to default values */
+	case ADV7604_MODE_HDMI:
-		io_write(sd, 0x16, 0x43);
+		/* set default prim_mode/vid_std for HDMI
-		io_write(sd, 0x17, 0x5a);
+		   accoring to [REF_03, c. 4.2] */
-		cp_write(sd, 0xa2, 0x00);
+		io_write(sd, 0x00, 0x02); /* video std */
-		cp_write(sd, 0xa3, 0x00);
+		io_write(sd, 0x01, 0x06); /* prim mode */
-		cp_write(sd, 0xa4, 0x00);
+		break;
-		cp_write(sd, 0xa5, 0x00);
+	default:
-		cp_write(sd, 0xa6, 0x00);
+		v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n",
-		cp_write(sd, 0xa7, 0x00);
+				__func__, state->mode);
+		break;
 	}
-}
 
+	cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7);
+	cp_write(sd, 0x90, ch1_fr_ll & 0xff);
+	cp_write(sd, 0xab, (height >> 4) & 0xff);
+	cp_write(sd, 0xac, (height & 0x0f) << 4);
+}
 
 static void set_rgb_quantization_range(struct v4l2_subdev *sd)
 {
@@ -738,12 +901,7 @@ static void set_rgb_quantization_range(struct v4l2_subdev *sd)
 	switch (state->rgb_quantization_range) {
 	case V4L2_DV_RGB_RANGE_AUTO:
 		/* automatic */
-		if ((hdmi_read(sd, 0x05) & 0x80) ||
+		if (DIGITAL_INPUT && !(hdmi_read(sd, 0x05) & 0x80)) {
-				(state->prim_mode == ADV7604_PRIM_MODE_COMP) ||
-				(state->prim_mode == ADV7604_PRIM_MODE_RGB)) {
-			/* receiving HDMI or analog signal */
-			io_write_and_or(sd, 0x02, 0x0f, 0xf0);
-		} else {
 			/* receiving DVI-D signal */
 
 			/* ADV7604 selects RGB limited range regardless of
@@ -756,6 +914,9 @@ static void set_rgb_quantization_range(struct v4l2_subdev *sd)
 				/* RGB full range (0-255) */
 				io_write_and_or(sd, 0x02, 0x0f, 0x10);
 			}
+		} else {
+			/* receiving HDMI or analog signal, set automode */
+			io_write_and_or(sd, 0x02, 0x0f, 0xf0);
 		}
 		break;
 	case V4L2_DV_RGB_RANGE_LIMITED:
@@ -967,8 +1128,10 @@ static int stdi2dv_timings(struct v4l2_subdev *sd,
 			state->aspect_ratio, timings))
 		return 0;
 
-	v4l2_dbg(2, debug, sd, "%s: No format candidate found for lcf=%d, bl = %d\n",
+	v4l2_dbg(2, debug, sd,
-			__func__, stdi->lcf, stdi->bl);
+		"%s: No format candidate found for lcvs = %d, lcf=%d, bl = %d, %chsync, %cvsync\n",
+		__func__, stdi->lcvs, stdi->lcf, stdi->bl,
+		stdi->hs_pol, stdi->vs_pol);
 	return -1;
 }
 
@@ -1123,7 +1286,7 @@ static int adv7604_query_dv_timings(struct v4l2_subdev *sd,
 		adv7604_fill_optional_dv_timings_fields(sd, timings);
 	} else {
 		/* find format
-		 * Since LCVS values are inaccurate (REF_03, page 275-276),
+		 * Since LCVS values are inaccurate [REF_03, p. 275-276],
 		 * stdi2dv_timings() is called with lcvs +-1 if the first attempt fails.
 		 */
 		if (!stdi2dv_timings(sd, &stdi, timings))
@@ -1135,9 +1298,31 @@ static int adv7604_query_dv_timings(struct v4l2_subdev *sd,
 		stdi.lcvs -= 2;
 		v4l2_dbg(1, debug, sd, "%s: lcvs - 1 = %d\n", __func__, stdi.lcvs);
 		if (stdi2dv_timings(sd, &stdi, timings)) {
+			/*
+			 * The STDI block may measure wrong values, especially
+			 * for lcvs and lcf. If the driver can not find any
+			 * valid timing, the STDI block is restarted to measure
+			 * the video timings again. The function will return an
+			 * error, but the restart of STDI will generate a new
+			 * STDI interrupt and the format detection process will
+			 * restart.
+			 */
+			if (state->restart_stdi_once) {
+				v4l2_dbg(1, debug, sd, "%s: restart STDI\n", __func__);
+				/* TODO restart STDI for Sync Channel 2 */
+				/* enter one-shot mode */
+				cp_write_and_or(sd, 0x86, 0xf9, 0x00);
+				/* trigger STDI restart */
+				cp_write_and_or(sd, 0x86, 0xf9, 0x04);
+				/* reset to continuous mode */
+				cp_write_and_or(sd, 0x86, 0xf9, 0x02);
+				state->restart_stdi_once = false;
+				return -ENOLINK;
+			}
 			v4l2_dbg(1, debug, sd, "%s: format not supported\n", __func__);
 			return -ERANGE;
 		}
+		state->restart_stdi_once = true;
 	}
 found:
 
@@ -1166,6 +1351,7 @@ static int adv7604_s_dv_timings(struct v4l2_subdev *sd,
 {
 	struct adv7604_state *state = to_state(sd);
 	struct v4l2_bt_timings *bt;
+	int err;
 
 	if (!timings)
 		return -EINVAL;
@@ -1178,12 +1364,20 @@ static int adv7604_s_dv_timings(struct v4l2_subdev *sd,
 				__func__, (u32)bt->pixelclock);
 		return -ERANGE;
 	}
+
 	adv7604_fill_optional_dv_timings_fields(sd, timings);
 
 	state->timings = *timings;
 
-	/* freerun */
+	cp_write(sd, 0x91, bt->interlaced ? 0x50 : 0x10);
-	configure_free_run(sd, bt);
+
+	/* Use prim_mode and vid_std when available */
+	err = configure_predefined_video_timings(sd, timings);
+	if (err) {
+		/* custom settings when the video format
+		 does not have prim_mode/vid_std */
+		configure_custom_video_timings(sd, bt);
+	}
 
 	set_rgb_quantization_range(sd);
 
@@ -1203,24 +1397,25 @@ static int adv7604_g_dv_timings(struct v4l2_subdev *sd,
 	return 0;
 }
 
-static void enable_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mode)
+static void enable_input(struct v4l2_subdev *sd)
 {
-	switch (prim_mode) {
+	struct adv7604_state *state = to_state(sd);
-	case ADV7604_PRIM_MODE_COMP:
+
-	case ADV7604_PRIM_MODE_RGB:
+	switch (state->mode) {
+	case ADV7604_MODE_COMP:
+	case ADV7604_MODE_GR:
 		/* enable */
 		io_write(sd, 0x15, 0xb0);   /* Disable Tristate of Pins (no audio) */
 		break;
-	case ADV7604_PRIM_MODE_HDMI_COMP:
+	case ADV7604_MODE_HDMI:
-	case ADV7604_PRIM_MODE_HDMI_GR:
 		/* enable */
 		hdmi_write(sd, 0x1a, 0x0a); /* Unmute audio */
 		hdmi_write(sd, 0x01, 0x00); /* Enable HDMI clock terminators */
 		io_write(sd, 0x15, 0xa0);   /* Disable Tristate of Pins */
 		break;
 	default:
-		v4l2_err(sd, "%s: reserved primary mode 0x%0x\n",
+		v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n",
-				__func__, prim_mode);
+				__func__, state->mode);
 		break;
 	}
 }
@@ -1233,17 +1428,13 @@ static void disable_input(struct v4l2_subdev *sd)
 	hdmi_write(sd, 0x01, 0x78); /* Disable HDMI clock terminators */
 }
 
-static void select_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mode)
+static void select_input(struct v4l2_subdev *sd)
 {
-	switch (prim_mode) {
+	struct adv7604_state *state = to_state(sd);
-	case ADV7604_PRIM_MODE_COMP:
-	case ADV7604_PRIM_MODE_RGB:
-		/* set mode and select free run resolution */
-		io_write(sd, 0x00, 0x07); /* video std */
-		io_write(sd, 0x01, 0x02); /* prim mode */
-		/* enable embedded syncs for auto graphics mode */
-		cp_write_and_or(sd, 0x81, 0xef, 0x10);
 
+	switch (state->mode) {
+	case ADV7604_MODE_COMP:
+	case ADV7604_MODE_GR:
 		/* reset ADI recommended settings for HDMI: */
 		/* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */
 		hdmi_write(sd, 0x0d, 0x04); /* HDMI filter optimization */
@@ -1271,16 +1462,7 @@ static void select_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mod
 		cp_write(sd, 0x40, 0x5c); /* CP core pre-gain control. Graphics mode */
 		break;
 
-	case ADV7604_PRIM_MODE_HDMI_COMP:
+	case ADV7604_MODE_HDMI:
-	case ADV7604_PRIM_MODE_HDMI_GR:
-		/* set mode and select free run resolution */
-		/* video std */
-		io_write(sd, 0x00,
-			(prim_mode == ADV7604_PRIM_MODE_HDMI_GR) ? 0x02 : 0x1e);
-		io_write(sd, 0x01, prim_mode); /* prim mode */
-		/* disable embedded syncs for auto graphics mode */
-		cp_write_and_or(sd, 0x81, 0xef, 0x00);
-
 		/* set ADI recommended settings for HDMI: */
 		/* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */
 		hdmi_write(sd, 0x0d, 0x84); /* HDMI filter optimization */
@@ -1309,7 +1491,8 @@ static void select_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mod
 
 		break;
 	default:
-		v4l2_err(sd, "%s: reserved primary mode 0x%0x\n", __func__, prim_mode);
+		v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n",
+				__func__, state->mode);
 		break;
 	}
 }
@@ -1321,26 +1504,13 @@ static int adv7604_s_routing(struct v4l2_subdev *sd,
 
 	v4l2_dbg(2, debug, sd, "%s: input %d", __func__, input);
 
-	switch (input) {
+	state->mode = input;
-	case 0:
-		/* TODO select HDMI_COMP or HDMI_GR */
-		state->prim_mode = ADV7604_PRIM_MODE_HDMI_COMP;
-		break;
-	case 1:
-		state->prim_mode = ADV7604_PRIM_MODE_RGB;
-		break;
-	case 2:
-		state->prim_mode = ADV7604_PRIM_MODE_COMP;
-		break;
-	default:
-		return -EINVAL;
-	}
 
 	disable_input(sd);
 
-	select_input(sd, state->prim_mode);
+	select_input(sd);
 
-	enable_input(sd, state->prim_mode);
+	enable_input(sd);
 
 	return 0;
 }
@@ -1549,8 +1719,9 @@ static int adv7604_log_status(struct v4l2_subdev *sd)
 	v4l2_info(sd, "CP locked: %s\n", no_lock_cp(sd) ? "false" : "true");
 	v4l2_info(sd, "CP free run: %s\n",
 			(!!(cp_read(sd, 0xff) & 0x10) ? "on" : "off"));
-	v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x\n",
+	v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x, v_freq = 0x%x\n",
-			io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f);
+			io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f,
+			(io_read(sd, 0x01) & 0x70) >> 4);
 
 	v4l2_info(sd, "-----Video Timings-----\n");
 	if (read_stdi(sd, &stdi))
@@ -1712,9 +1883,9 @@ static int adv7604_core_init(struct v4l2_subdev *sd)
 	cp_write(sd, 0xba, (pdata->hdmi_free_run_mode << 1) | 0x01); /* HDMI free run */
 	cp_write(sd, 0xf3, 0xdc); /* Low threshold to enter/exit free run mode */
 	cp_write(sd, 0xf9, 0x23); /*  STDI ch. 1 - LCVS change threshold -
-				      ADI recommended setting [REF_01 c. 2.3.3] */
+				      ADI recommended setting [REF_01, c. 2.3.3] */
 	cp_write(sd, 0x45, 0x23); /*  STDI ch. 2 - LCVS change threshold -
-				      ADI recommended setting [REF_01 c. 2.3.3] */
+				      ADI recommended setting [REF_01, c. 2.3.3] */
 	cp_write(sd, 0xc9, 0x2d); /* use prim_mode and vid_std as free run resolution
 				     for digital formats */
 
@@ -1724,11 +1895,6 @@ static int adv7604_core_init(struct v4l2_subdev *sd)
 	afe_write(sd, 0x02, pdata->ain_sel); /* Select analog input muxing mode */
 	io_write_and_or(sd, 0x30, ~(1 << 4), pdata->output_bus_lsb_to_msb << 4);
 
-	state->prim_mode = pdata->prim_mode;
-	select_input(sd, pdata->prim_mode);
-
-	enable_input(sd, pdata->prim_mode);
-
 	/* interrupts */
 	io_write(sd, 0x40, 0xc2); /* Configure INT1 */
 	io_write(sd, 0x41, 0xd7); /* STDI irq for any change, disable INT2 */
@@ -1883,6 +2049,7 @@ static int adv7604_probe(struct i2c_client *client,
 		v4l2_err(sd, "failed to create all i2c clients\n");
 		goto err_i2c;
 	}
+	state->restart_stdi_once = true;
 
 	/* work queues */
 	state->work_queues = create_singlethread_workqueue(client->name);

drivers/media/i2c/soc_camera/mt9v022.c

@@ -263,9 +263,14 @@ static int mt9v022_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a)
 		if (ret & 1) /* Autoexposure */
 			ret = reg_write(client, mt9v022->reg->max_total_shutter_width,
 					rect.height + mt9v022->y_skip_top + 43);
-		else
+		/*
-			ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH,
+		 * If autoexposure is off, there is no need to set
-					rect.height + mt9v022->y_skip_top + 43);
+		 * MT9V022_TOTAL_SHUTTER_WIDTH here. Autoexposure can be off
+		 * only if the user has set exposure manually, using the
+		 * V4L2_CID_EXPOSURE_AUTO with the value V4L2_EXPOSURE_MANUAL.
+		 * In this case the register MT9V022_TOTAL_SHUTTER_WIDTH
+		 * already contains the correct value.
+		 */
 	}
 	/* Setup frame format: defaults apart from width and height */
 	if (!ret)

drivers/media/platform/exynos-gsc/gsc-core.c

@@ -965,8 +965,10 @@ static struct platform_device_id gsc_driver_ids[] = {
 MODULE_DEVICE_TABLE(platform, gsc_driver_ids);
 
 static const struct of_device_id exynos_gsc_match[] = {
-	{ .compatible = "samsung,exynos5250-gsc",
+	{
-	.data = &gsc_v_100_drvdata, },
+		.compatible = "samsung,exynos5-gsc",
+		.data = &gsc_v_100_drvdata,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, exynos_gsc_match);

drivers/media/platform/exynos-gsc/gsc-m2m.c

@@ -657,8 +657,7 @@ static int gsc_m2m_release(struct file *file)
 	pr_debug("pid: %d, state: 0x%lx, refcnt= %d",
 		task_pid_nr(current), gsc->state, gsc->m2m.refcnt);
 
-	if (mutex_lock_interruptible(&gsc->lock))
+	mutex_lock(&gsc->lock);
-		return -ERESTARTSYS;
 
 	v4l2_m2m_ctx_release(ctx->m2m_ctx);
 	gsc_ctrls_delete(ctx);
@@ -732,6 +731,7 @@ int gsc_register_m2m_device(struct gsc_dev *gsc)
 	gsc->vdev.ioctl_ops	= &gsc_m2m_ioctl_ops;
 	gsc->vdev.release	= video_device_release_empty;
 	gsc->vdev.lock		= &gsc->lock;
+	gsc->vdev.vfl_dir	= VFL_DIR_M2M;
 	snprintf(gsc->vdev.name, sizeof(gsc->vdev.name), "%s.%d:m2m",
 					GSC_MODULE_NAME, gsc->id);
 

drivers/media/platform/exynos-gsc/gsc-regs.h

@@ -40,10 +40,10 @@
 #define GSC_IN_ROT_YFLIP		(2 << 16)
 #define GSC_IN_ROT_XFLIP		(1 << 16)
 #define GSC_IN_RGB_TYPE_MASK		(3 << 14)
-#define GSC_IN_RGB_HD_WIDE		(3 << 14)
+#define GSC_IN_RGB_HD_NARROW		(3 << 14)
-#define GSC_IN_RGB_HD_NARROW		(2 << 14)
+#define GSC_IN_RGB_HD_WIDE		(2 << 14)
-#define GSC_IN_RGB_SD_WIDE		(1 << 14)
+#define GSC_IN_RGB_SD_NARROW		(1 << 14)
-#define GSC_IN_RGB_SD_NARROW		(0 << 14)
+#define GSC_IN_RGB_SD_WIDE		(0 << 14)
 #define GSC_IN_YUV422_1P_ORDER_MASK	(1 << 13)
 #define GSC_IN_YUV422_1P_ORDER_LSB_Y	(0 << 13)
 #define GSC_IN_YUV422_1P_OEDER_LSB_C	(1 << 13)
@@ -85,10 +85,10 @@
 #define GSC_OUT_GLOBAL_ALPHA_MASK	(0xff << 24)
 #define GSC_OUT_GLOBAL_ALPHA(x)		((x) << 24)
 #define GSC_OUT_RGB_TYPE_MASK		(3 << 10)
-#define GSC_OUT_RGB_HD_NARROW		(3 << 10)
+#define GSC_OUT_RGB_HD_WIDE		(3 << 10)
-#define GSC_OUT_RGB_HD_WIDE		(2 << 10)
+#define GSC_OUT_RGB_HD_NARROW		(2 << 10)
-#define GSC_OUT_RGB_SD_NARROW		(1 << 10)
+#define GSC_OUT_RGB_SD_WIDE		(1 << 10)
-#define GSC_OUT_RGB_SD_WIDE		(0 << 10)
+#define GSC_OUT_RGB_SD_NARROW		(0 << 10)
 #define GSC_OUT_YUV422_1P_ORDER_MASK	(1 << 9)
 #define GSC_OUT_YUV422_1P_ORDER_LSB_Y	(0 << 9)
 #define GSC_OUT_YUV422_1P_OEDER_LSB_C	(1 << 9)

drivers/media/platform/omap3isp/ispccdc.c

@@ -1706,7 +1706,7 @@ static long ccdc_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
 }
 
 static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
-				const struct v4l2_event_subscription *sub)
+				struct v4l2_event_subscription *sub)
 {
 	if (sub->type != V4L2_EVENT_FRAME_SYNC)
 		return -EINVAL;
@@ -1719,7 +1719,7 @@ static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
 }
 
 static int ccdc_unsubscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
-				  const struct v4l2_event_subscription *sub)
+				  struct v4l2_event_subscription *sub)
 {
 	return v4l2_event_unsubscribe(fh, sub);
 }

drivers/media/platform/omap3isp/ispstat.c

@@ -1025,7 +1025,7 @@ void omap3isp_stat_dma_isr(struct ispstat *stat)
 
 int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev,
 				  struct v4l2_fh *fh,
-				  const struct v4l2_event_subscription *sub)
+				  struct v4l2_event_subscription *sub)
 {
 	struct ispstat *stat = v4l2_get_subdevdata(subdev);
 
@@ -1037,7 +1037,7 @@ int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev,
 
 int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev,
 				    struct v4l2_fh *fh,
-				    const struct v4l2_event_subscription *sub)
+				    struct v4l2_event_subscription *sub)
 {
 	return v4l2_event_unsubscribe(fh, sub);
 }

drivers/media/platform/omap3isp/ispstat.h

@@ -147,10 +147,10 @@ int omap3isp_stat_init(struct ispstat *stat, const char *name,
 void omap3isp_stat_cleanup(struct ispstat *stat);
 int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev,
 				  struct v4l2_fh *fh,
-				  const struct v4l2_event_subscription *sub);
+				  struct v4l2_event_subscription *sub);
 int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev,
 				    struct v4l2_fh *fh,
-				    const struct v4l2_event_subscription *sub);
+				    struct v4l2_event_subscription *sub);
 int omap3isp_stat_s_stream(struct v4l2_subdev *subdev, int enable);
 
 int omap3isp_stat_busy(struct ispstat *stat);

drivers/media/platform/omap3isp/ispvideo.c

@@ -792,7 +792,7 @@ isp_video_get_crop(struct file *file, void *fh, struct v4l2_crop *crop)
 }
 
 static int
-isp_video_set_crop(struct file *file, void *fh, struct v4l2_crop *crop)
+isp_video_set_crop(struct file *file, void *fh, const struct v4l2_crop *crop)
 {
 	struct isp_video *video = video_drvdata(file);
 	struct v4l2_subdev *subdev;

drivers/media/platform/s5p-fimc/Kconfig

@@ -24,6 +24,7 @@ config VIDEO_S5P_FIMC
 config VIDEO_S5P_MIPI_CSIS
 	tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver"
 	depends on REGULATOR
+	select S5P_SETUP_MIPIPHY
 	help
 	  This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2
 	  receiver (MIPI-CSIS) devices.

drivers/media/platform/s5p-fimc/fimc-capture.c

@@ -556,8 +556,7 @@ static int fimc_capture_close(struct file *file)
 
 	dbg("pid: %d, state: 0x%lx", task_pid_nr(current), fimc->state);
 
-	if (mutex_lock_interruptible(&fimc->lock))
+	mutex_lock(&fimc->lock);
-		return -ERESTARTSYS;
 
 	if (--fimc->vid_cap.refcnt == 0) {
 		clear_bit(ST_CAPT_BUSY, &fimc->state);
@@ -1736,7 +1735,9 @@ static int fimc_register_capture_device(struct fimc_dev *fimc,
 	q->mem_ops = &vb2_dma_contig_memops;
 	q->buf_struct_size = sizeof(struct fimc_vid_buffer);
 
-	vb2_queue_init(q);
+	ret = vb2_queue_init(q);
+	if (ret)
+		goto err_ent;
 
 	vid_cap->vd_pad.flags = MEDIA_PAD_FL_SINK;
 	ret = media_entity_init(&vfd->entity, 1, &vid_cap->vd_pad, 0);
@@ -1772,9 +1773,13 @@ static int fimc_capture_subdev_registered(struct v4l2_subdev *sd)
 	if (ret)
 		return ret;
 
+	fimc->pipeline_ops = v4l2_get_subdev_hostdata(sd);
+
 	ret = fimc_register_capture_device(fimc, sd->v4l2_dev);
-	if (ret)
+	if (ret) {
 		fimc_unregister_m2m_device(fimc);
+		fimc->pipeline_ops = NULL;
+	}
 
 	return ret;
 }
@@ -1791,6 +1796,7 @@ static void fimc_capture_subdev_unregistered(struct v4l2_subdev *sd)
 	if (video_is_registered(&fimc->vid_cap.vfd)) {
 		video_unregister_device(&fimc->vid_cap.vfd);
 		media_entity_cleanup(&fimc->vid_cap.vfd.entity);
+		fimc->pipeline_ops = NULL;
 	}
 	kfree(fimc->vid_cap.ctx);
 	fimc->vid_cap.ctx = NULL;

drivers/media/platform/s5p-fimc/fimc-lite.c

@@ -491,8 +491,7 @@ static int fimc_lite_close(struct file *file)
 	struct fimc_lite *fimc = video_drvdata(file);
 	int ret;
 
-	if (mutex_lock_interruptible(&fimc->lock))
+	mutex_lock(&fimc->lock);
-		return -ERESTARTSYS;
 
 	if (--fimc->ref_count == 0 && fimc->out_path == FIMC_IO_DMA) {
 		clear_bit(ST_FLITE_IN_USE, &fimc->state);
@@ -1253,7 +1252,9 @@ static int fimc_lite_subdev_registered(struct v4l2_subdev *sd)
 	q->buf_struct_size = sizeof(struct flite_buffer);
 	q->drv_priv = fimc;
 
-	vb2_queue_init(q);
+	ret = vb2_queue_init(q);
+	if (ret < 0)
+		return ret;
 
 	fimc->vd_pad.flags = MEDIA_PAD_FL_SINK;
 	ret = media_entity_init(&vfd->entity, 1, &fimc->vd_pad, 0);
@@ -1261,10 +1262,12 @@ static int fimc_lite_subdev_registered(struct v4l2_subdev *sd)
 		return ret;
 
 	video_set_drvdata(vfd, fimc);
+	fimc->pipeline_ops = v4l2_get_subdev_hostdata(sd);
 
 	ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1);
 	if (ret < 0) {
 		media_entity_cleanup(&vfd->entity);
+		fimc->pipeline_ops = NULL;
 		return ret;
 	}
 
@@ -1283,6 +1286,7 @@ static void fimc_lite_subdev_unregistered(struct v4l2_subdev *sd)
 	if (video_is_registered(&fimc->vfd)) {
 		video_unregister_device(&fimc->vfd);
 		media_entity_cleanup(&fimc->vfd.entity);
+		fimc->pipeline_ops = NULL;
 	}
 }
 

drivers/media/platform/s5p-fimc/fimc-m2m.c

@@ -718,8 +718,7 @@ static int fimc_m2m_release(struct file *file)
 	dbg("pid: %d, state: 0x%lx, refcnt= %d",
 		task_pid_nr(current), fimc->state, fimc->m2m.refcnt);
 
-	if (mutex_lock_interruptible(&fimc->lock))
+	mutex_lock(&fimc->lock);
-		return -ERESTARTSYS;
 
 	v4l2_m2m_ctx_release(ctx->m2m_ctx);
 	fimc_ctrls_delete(ctx);

drivers/media/platform/s5p-fimc/fimc-mdevice.c

@@ -343,53 +343,50 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
 static int fimc_register_callback(struct device *dev, void *p)
 {
 	struct fimc_dev *fimc = dev_get_drvdata(dev);
-	struct v4l2_subdev *sd = &fimc->vid_cap.subdev;
+	struct v4l2_subdev *sd;
 	struct fimc_md *fmd = p;
-	int ret = 0;
+	int ret;
 
-	if (!fimc || !fimc->pdev)
+	if (fimc == NULL || fimc->id >= FIMC_MAX_DEVS)
 		return 0;
 
-	if (fimc->pdev->id < 0 || fimc->pdev->id >= FIMC_MAX_DEVS)
+	sd = &fimc->vid_cap.subdev;
-		return 0;
-
-	fimc->pipeline_ops = &fimc_pipeline_ops;
-	fmd->fimc[fimc->pdev->id] = fimc;
 	sd->grp_id = FIMC_GROUP_ID;
+	v4l2_set_subdev_hostdata(sd, (void *)&fimc_pipeline_ops);
 
 	ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd);
 	if (ret) {
 		v4l2_err(&fmd->v4l2_dev, "Failed to register FIMC.%d (%d)\n",
 			 fimc->id, ret);
+		return ret;
 	}
 
-	return ret;
+	fmd->fimc[fimc->id] = fimc;
+	return 0;
 }
 
 static int fimc_lite_register_callback(struct device *dev, void *p)
 {
 	struct fimc_lite *fimc = dev_get_drvdata(dev);
-	struct v4l2_subdev *sd = &fimc->subdev;
 	struct fimc_md *fmd = p;
 	int ret;
 
-	if (fimc == NULL)
+	if (fimc == NULL || fimc->index >= FIMC_LITE_MAX_DEVS)
 		return 0;
 
-	if (fimc->index >= FIMC_LITE_MAX_DEVS)
+	fimc->subdev.grp_id = FLITE_GROUP_ID;
-		return 0;
+	v4l2_set_subdev_hostdata(&fimc->subdev, (void *)&fimc_pipeline_ops);
 
-	fimc->pipeline_ops = &fimc_pipeline_ops;
+	ret = v4l2_device_register_subdev(&fmd->v4l2_dev, &fimc->subdev);
-	fmd->fimc_lite[fimc->index] = fimc;
-	sd->grp_id = FLITE_GROUP_ID;
-
-	ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd);
 	if (ret) {
 		v4l2_err(&fmd->v4l2_dev,
 			 "Failed to register FIMC-LITE.%d (%d)\n",
 			 fimc->index, ret);
+		return ret;
 	}
-	return ret;
+
+	fmd->fimc_lite[fimc->index] = fimc;
+	return 0;
 }
 
 static int csis_register_callback(struct device *dev, void *p)
@@ -407,10 +404,12 @@ static int csis_register_callback(struct device *dev, void *p)
 	v4l2_info(sd, "csis%d sd: %s\n", pdev->id, sd->name);
 
 	id = pdev->id < 0 ? 0 : pdev->id;
-	fmd->csis[id].sd = sd;
 	sd->grp_id = CSIS_GROUP_ID;
+
 	ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd);
-	if (ret)
+	if (!ret)
+		fmd->csis[id].sd = sd;
+	else
 		v4l2_err(&fmd->v4l2_dev,
 			 "Failed to register CSIS subdevice: %d\n", ret);
 	return ret;

drivers/media/platform/s5p-mfc/s5p_mfc.c

@@ -381,11 +381,8 @@ static void s5p_mfc_handle_frame(struct s5p_mfc_ctx *ctx,
 		ctx->consumed_stream += s5p_mfc_hw_call(dev->mfc_ops,
 						get_consumed_stream, dev);
 		if (ctx->codec_mode != S5P_MFC_CODEC_H264_DEC &&
-			s5p_mfc_hw_call(dev->mfc_ops,
+			ctx->consumed_stream + STUFF_BYTE <
-				get_dec_frame_type, dev) ==
+			src_buf->b->v4l2_planes[0].bytesused) {
-					S5P_FIMV_DECODE_FRAME_P_FRAME
-					&& ctx->consumed_stream + STUFF_BYTE <
-					src_buf->b->v4l2_planes[0].bytesused) {
 			/* Run MFC again on the same buffer */
 			mfc_debug(2, "Running again the same buffer\n");
 			ctx->after_packed_pb = 1;

drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c

@@ -1762,7 +1762,7 @@ int s5p_mfc_get_dspl_y_adr_v6(struct s5p_mfc_dev *dev)
 
 int s5p_mfc_get_dec_y_adr_v6(struct s5p_mfc_dev *dev)
 {
-	return mfc_read(dev, S5P_FIMV_D_DISPLAY_LUMA_ADDR_V6);
+	return mfc_read(dev, S5P_FIMV_D_DECODED_LUMA_ADDR_V6);
 }
 
 int s5p_mfc_get_dspl_status_v6(struct s5p_mfc_dev *dev)

drivers/media/platform/sh_vou.c

@@ -935,9 +935,10 @@ static int sh_vou_g_crop(struct file *file, void *fh, struct v4l2_crop *a)
 /* Assume a dull encoder, do all the work ourselves. */
 static int sh_vou_s_crop(struct file *file, void *fh, const struct v4l2_crop *a)
 {
+	struct v4l2_crop a_writable = *a;
 	struct video_device *vdev = video_devdata(file);
 	struct sh_vou_device *vou_dev = video_get_drvdata(vdev);
-	struct v4l2_rect *rect = &a->c;
+	struct v4l2_rect *rect = &a_writable.c;
 	struct v4l2_crop sd_crop = {.type = V4L2_BUF_TYPE_VIDEO_OUTPUT};
 	struct v4l2_pix_format *pix = &vou_dev->pix;
 	struct sh_vou_geometry geo;

drivers/media/platform/soc_camera/mx1_camera.c

@@ -470,14 +470,6 @@ static void mx1_camera_remove_device(struct soc_camera_device *icd)
 	pcdev->icd = NULL;
 }
 
-static int mx1_camera_set_crop(struct soc_camera_device *icd,
-			       struct v4l2_crop *a)
-{
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-
-	return v4l2_subdev_call(sd, video, s_crop, a);
-}
-
 static int mx1_camera_set_bus_param(struct soc_camera_device *icd)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
@@ -689,7 +681,6 @@ static struct soc_camera_host_ops mx1_soc_camera_host_ops = {
 	.add		= mx1_camera_add_device,
 	.remove		= mx1_camera_remove_device,
 	.set_bus_param	= mx1_camera_set_bus_param,
-	.set_crop	= mx1_camera_set_crop,
 	.set_fmt	= mx1_camera_set_fmt,
 	.try_fmt	= mx1_camera_try_fmt,
 	.init_videobuf	= mx1_camera_init_videobuf,

drivers/media/platform/soc_camera/mx2_camera.c

@@ -864,8 +864,10 @@ static int mx2_start_streaming(struct vb2_queue *q, unsigned int count)
 
 		bytesperline = soc_mbus_bytes_per_line(icd->user_width,
 				icd->current_fmt->host_fmt);
-		if (bytesperline < 0)
+		if (bytesperline < 0) {
+			spin_unlock_irqrestore(&pcdev->lock, flags);
 			return bytesperline;
+		}
 
 		/*
 		 * I didn't manage to properly enable/disable the prp
@@ -878,8 +880,10 @@ static int mx2_start_streaming(struct vb2_queue *q, unsigned int count)
 		pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev,
 				pcdev->discard_size, &pcdev->discard_buffer_dma,
 				GFP_KERNEL);
-		if (!pcdev->discard_buffer)
+		if (!pcdev->discard_buffer) {
+			spin_unlock_irqrestore(&pcdev->lock, flags);
 			return -ENOMEM;
+		}
 
 		pcdev->buf_discard[0].discard = true;
 		list_add_tail(&pcdev->buf_discard[0].queue,
@@ -1099,9 +1103,10 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd)
 }
 
 static int mx2_camera_set_crop(struct soc_camera_device *icd,
-				struct v4l2_crop *a)
+				const struct v4l2_crop *a)
 {
-	struct v4l2_rect *rect = &a->c;
+	struct v4l2_crop a_writable = *a;
+	struct v4l2_rect *rect = &a_writable.c;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct v4l2_mbus_framefmt mf;
 	int ret;

drivers/media/platform/soc_camera/mx3_camera.c

@@ -799,9 +799,10 @@ static inline void stride_align(__u32 *width)
  * default g_crop and cropcap from soc_camera.c
  */
 static int mx3_camera_set_crop(struct soc_camera_device *icd,
-			       struct v4l2_crop *a)
+			       const struct v4l2_crop *a)
 {
-	struct v4l2_rect *rect = &a->c;
+	struct v4l2_crop a_writable = *a;
+	struct v4l2_rect *rect = &a_writable.c;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);

drivers/media/platform/soc_camera/omap1_camera.c

@@ -1215,9 +1215,9 @@ static int set_mbus_format(struct omap1_cam_dev *pcdev, struct device *dev,
 }
 
 static int omap1_cam_set_crop(struct soc_camera_device *icd,
-			       struct v4l2_crop *crop)
+			       const struct v4l2_crop *crop)
 {
-	struct v4l2_rect *rect = &crop->c;
+	const struct v4l2_rect *rect = &crop->c;
 	const struct soc_camera_format_xlate *xlate = icd->current_fmt;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct device *dev = icd->parent;

drivers/media/platform/soc_camera/pxa_camera.c

@@ -1337,9 +1337,9 @@ static int pxa_camera_check_frame(u32 width, u32 height)
 }
 
 static int pxa_camera_set_crop(struct soc_camera_device *icd,
-			       struct v4l2_crop *a)
+			       const struct v4l2_crop *a)
 {
-	struct v4l2_rect *rect = &a->c;
+	const struct v4l2_rect *rect = &a->c;
 	struct device *dev = icd->parent;
 	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct pxa_camera_dev *pcdev = ici->priv;

drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c

@@ -1182,13 +1182,13 @@ static void sh_mobile_ceu_put_formats(struct soc_camera_device *icd)
 }
 
 /* Check if any dimension of r1 is smaller than respective one of r2 */
-static bool is_smaller(struct v4l2_rect *r1, struct v4l2_rect *r2)
+static bool is_smaller(const struct v4l2_rect *r1, const struct v4l2_rect *r2)
 {
 	return r1->width < r2->width || r1->height < r2->height;
 }
 
 /* Check if r1 fails to cover r2 */
-static bool is_inside(struct v4l2_rect *r1, struct v4l2_rect *r2)
+static bool is_inside(const struct v4l2_rect *r1, const struct v4l2_rect *r2)
 {
 	return r1->left > r2->left || r1->top > r2->top ||
 		r1->left + r1->width < r2->left + r2->width ||
@@ -1263,7 +1263,7 @@ static void update_subrect(struct sh_mobile_ceu_cam *cam)
  * 3. if (2) failed, try to request the maximum image
  */
 static int client_s_crop(struct soc_camera_device *icd, struct v4l2_crop *crop,
-			 const struct v4l2_crop *cam_crop)
+			 struct v4l2_crop *cam_crop)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct v4l2_rect *rect = &crop->c, *cam_rect = &cam_crop->c;
@@ -1519,7 +1519,8 @@ static int client_scale(struct soc_camera_device *icd,
 static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 				  const struct v4l2_crop *a)
 {
-	struct v4l2_rect *rect = &a->c;
+	struct v4l2_crop a_writable = *a;
+	const struct v4l2_rect *rect = &a_writable.c;
 	struct device *dev = icd->parent;
 	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
@@ -1545,7 +1546,7 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 	 * 1. - 2. Apply iterative camera S_CROP for new input window, read back
 	 * actual camera rectangle.
 	 */
-	ret = client_s_crop(icd, a, &cam_crop);
+	ret = client_s_crop(icd, &a_writable, &cam_crop);
 	if (ret < 0)
 		return ret;
 
@@ -1946,7 +1947,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 }
 
 static int sh_mobile_ceu_set_livecrop(struct soc_camera_device *icd,
-				      struct v4l2_crop *a)
+				      const struct v4l2_crop *a)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);

drivers/media/usb/dvb-usb-v2/dvb_usb_core.c

@@ -283,14 +283,13 @@ static inline int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed,
 
 	/* activate the pid on the device pid filter */
 	if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER &&
-			adap->pid_filtering &&
+			adap->pid_filtering && adap->props->pid_filter) {
-			adap->props->pid_filter)
 		ret = adap->props->pid_filter(adap, dvbdmxfeed->index,
 				dvbdmxfeed->pid, (count == 1) ? 1 : 0);
-			if (ret < 0)
+		if (ret < 0)
-				dev_err(&d->udev->dev, "%s: pid_filter() " \
+			dev_err(&d->udev->dev, "%s: pid_filter() failed=%d\n",
-						"failed=%d\n", KBUILD_MODNAME,
+					KBUILD_MODNAME, ret);
-						ret);
+	}
 
 	/* start feeding if it is first pid */
 	if (adap->feed_count == 1 && count == 1) {

drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c

@@ -32,9 +32,7 @@ int dvb_usbv2_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf,
 		return -EINVAL;
 	}
 
-	ret = mutex_lock_interruptible(&d->usb_mutex);
+	mutex_lock(&d->usb_mutex);
-	if (ret < 0)
-		return ret;
 
 	dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, wlen, wbuf);
 

drivers/media/usb/dvb-usb-v2/rtl28xxu.c

@@ -1346,6 +1346,10 @@ static const struct usb_device_id rtl28xxu_id_table[] = {
 		&rtl2832u_props, "DigitalNow Quad DVB-T Receiver", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d3,
 		&rtl2832u_props, "TerraTec Cinergy T Stick RC (Rev. 3)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1102,
+		&rtl2832u_props, "Dexatek DK mini DVB-T Dongle", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d7,
+		&rtl2832u_props, "TerraTec Cinergy T Stick+", NULL) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table);

drivers/mfd/arizona-core.c

@@ -96,11 +96,11 @@ static irqreturn_t arizona_underclocked(int irq, void *data)
 		return IRQ_NONE;
 	}
 
-	if (val & ARIZONA_AIF3_UNDERCLOCKED_STS)
-		dev_err(arizona->dev, "AIF3 underclocked\n");
 	if (val & ARIZONA_AIF3_UNDERCLOCKED_STS)
 		dev_err(arizona->dev, "AIF3 underclocked\n");
 	if (val & ARIZONA_AIF2_UNDERCLOCKED_STS)
+		dev_err(arizona->dev, "AIF2 underclocked\n");
+	if (val & ARIZONA_AIF1_UNDERCLOCKED_STS)
 		dev_err(arizona->dev, "AIF1 underclocked\n");
 	if (val & ARIZONA_ISRC2_UNDERCLOCKED_STS)
 		dev_err(arizona->dev, "ISRC2 underclocked\n");
@@ -417,11 +417,19 @@ int __devinit arizona_dev_init(struct arizona *arizona)
 
 	/* If we have a /RESET GPIO we'll already be reset */
 	if (!arizona->pdata.reset) {
+		regcache_mark_dirty(arizona->regmap);
+
 		ret = regmap_write(arizona->regmap, ARIZONA_SOFTWARE_RESET, 0);
 		if (ret != 0) {
 			dev_err(dev, "Failed to reset device: %d\n", ret);
 			goto err_reset;
 		}
+
+		ret = regcache_sync(arizona->regmap);
+		if (ret != 0) {
+			dev_err(dev, "Failed to sync device: %d\n", ret);
+			goto err_reset;
+		}
 	}
 
 	ret = arizona_wait_for_boot(arizona);
@@ -522,7 +530,7 @@ int __devinit arizona_dev_init(struct arizona *arizona)
 		break;
 	case WM5110:
 		ret = mfd_add_devices(arizona->dev, -1, wm5110_devs,
-				      ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
+				      ARRAY_SIZE(wm5110_devs), NULL, 0, NULL);
 		break;
 	}