hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

hwmon: (nct7904) Add array fan_alarm and vsen_alarm to store the alarms in nct7904_data struct. 

SMI# interrupt for fan and voltage is Two-Times Interrupt Mode.
Fan or voltage exceeds high limit or going below low limit,
it will causes an interrupt if the previous interrupt has been
reset by reading all the interrupt Status Register. Thus, add the
array fan_alarm and vsen_alarm to store the alarms for all of the
fan and voltage sensors.

Signed-off-by: amy.shih <amy.shih@advantech.com.tw>
Link: https://lore.kernel.org/r/20190919030205.11440-1-Amy.Shih@advantech.com.tw
Fixes: 486842db3b ("hwmon: (nct7904) Add extra sysfs support for fan, voltage and temperature.")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
amy.shih 2019-09-19 11:02:05 +08:00 committed by Guenter Roeck
parent b428db1e88
commit 6bbfdcbc8e
1 changed files with 20 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
drivers/hwmon/nct7904.c
View File

@ -99,6 +99,8 @@ struct nct7904_data {
u8 enable_dts;
u8 has_dts;
u8 temp_mode; /* 0: TR mode, 1: TD mode */
u8 fan_alarm[2];
u8 vsen_alarm[3];
};
/* Access functions */
@ -214,7 +216,15 @@ static int nct7904_read_fan(struct device *dev, u32 attr, int channel,
SMI_STS5_REG + (channel >> 3));
if (ret < 0)
return ret;
*val = (ret >> (channel & 0x07)) & 1;
if (!data->fan_alarm[channel >> 3])
data->fan_alarm[channel >> 3] = ret & 0xff;
else
/* If there is new alarm showing up */
data->fan_alarm[channel >> 3] |= (ret & 0xff);
*val = (data->fan_alarm[channel >> 3] >> (channel & 0x07)) & 1;
/* Needs to clean the alarm if alarm existing */
if (*val)
data->fan_alarm[channel >> 3] ^= 1 << (channel & 0x07);
return 0;
default:
return -EOPNOTSUPP;
@ -298,7 +308,15 @@ static int nct7904_read_in(struct device *dev, u32 attr, int channel,
SMI_STS1_REG + (index >> 3));
if (ret < 0)
return ret;
*val = (ret >> (index & 0x07)) & 1;
if (!data->vsen_alarm[index >> 3])
data->vsen_alarm[index >> 3] = ret & 0xff;
else
/* If there is new alarm showing up */
data->vsen_alarm[index >> 3] |= (ret & 0xff);
*val = (data->vsen_alarm[index >> 3] >> (index & 0x07)) & 1;
/* Needs to clean the alarm if alarm existing */
if (*val)
data->vsen_alarm[index >> 3] ^= 1 << (index & 0x07);
return 0;
default:
return -EOPNOTSUPP;