From 26047e2d6bde5b2e1b791e0ec1c3234894fdf3fa Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Fri, 30 Nov 2012 11:28:55 +0100 Subject: [PATCH 001/553] ASoC: cs4271: fix sparse warning Make the flag in the pdata of type bool to fix a sparse warning. Signed-off-by: Daniel Mack Reported-by: Fengguang Wu Signed-off-by: Mark Brown --- include/sound/cs4271.h | 2 +- sound/soc/codecs/cs4271.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/sound/cs4271.h b/include/sound/cs4271.h index 6d9e15ed1dcf..dd8c48d14ed9 100644 --- a/include/sound/cs4271.h +++ b/include/sound/cs4271.h @@ -19,7 +19,7 @@ struct cs4271_platform_data { int gpio_nreset; /* GPIO driving Reset pin, if any */ - int amutec_eq_bmutec:1; /* flag to enable AMUTEC=BMUTEC */ + bool amutec_eq_bmutec; /* flag to enable AMUTEC=BMUTEC */ }; #endif /* __CS4271_H */ diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c index 2ac5fe61a96c..f07d1b7d6c69 100644 --- a/sound/soc/codecs/cs4271.c +++ b/sound/soc/codecs/cs4271.c @@ -474,7 +474,7 @@ static int cs4271_probe(struct snd_soc_codec *codec) struct cs4271_platform_data *cs4271plat = codec->dev->platform_data; int ret; int gpio_nreset = -EINVAL; - int amutec_eq_bmutec = 0; + bool amutec_eq_bmutec = false; #ifdef CONFIG_OF if (of_match_device(cs4271_dt_ids, codec->dev)) { @@ -483,7 +483,7 @@ static int cs4271_probe(struct snd_soc_codec *codec) if (!of_get_property(codec->dev->of_node, "cirrus,amutec-eq-bmutec", NULL)) - amutec_eq_bmutec = 1; + amutec_eq_bmutec = true; } #endif From b8455c9f6f661fb9bcb791370478d6d15c9bf2b3 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Fri, 30 Nov 2012 11:28:56 +0100 Subject: [PATCH 002/553] ASoC: cs4271: fix property check The driver had the property check for 'cirrus,amutec_eq_bmutec' the wrong way around. That happens if you misspell the property in the bindings during tests. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- sound/soc/codecs/cs4271.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c index f07d1b7d6c69..449a98b8874c 100644 --- a/sound/soc/codecs/cs4271.c +++ b/sound/soc/codecs/cs4271.c @@ -481,7 +481,7 @@ static int cs4271_probe(struct snd_soc_codec *codec) gpio_nreset = of_get_named_gpio(codec->dev->of_node, "reset-gpio", 0); - if (!of_get_property(codec->dev->of_node, + if (of_get_property(codec->dev->of_node, "cirrus,amutec-eq-bmutec", NULL)) amutec_eq_bmutec = true; } From 1604c1e760119ab3fe9f71679ebaeb058d3d8ae1 Mon Sep 17 00:00:00 2001 From: Jack Pham Date: Mon, 10 Dec 2012 14:28:13 -0800 Subject: [PATCH 003/553] usb: dwc3: debugfs: fix regdump offset As with dwc_readl/writel, the global registers are specified as offsets starting from the beginning of the xHCI address space, but the memory region pointed to by dwc->regs already maps to the start of the global addresses. Fix by offsetting each of the regs relative to DWC3_GLOBALS_REGS_START. Signed-off-by: Jack Pham Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index 92604b4f9712..5945aadaa1c9 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -56,7 +56,7 @@ #define dump_register(nm) \ { \ .name = __stringify(nm), \ - .offset = DWC3_ ##nm, \ + .offset = DWC3_ ##nm - DWC3_GLOBALS_REGS_START, \ } static const struct debugfs_reg32 dwc3_regs[] = { From 584829459bd4421f0f57d11a6ceeef096ec81d08 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 10 Dec 2012 22:43:45 -0800 Subject: [PATCH 004/553] usb: renesas_usbhs: gadget: remove usbhsg_uep_init() Current driver always initialized uep->pipe to NULL on usbhsg_try_start(). But it breaks relationship with usb_ep_ops :: enable/disable functions when suspend/resume. This patch solved this issue by initializing uep->pipe on probe() Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/mod_gadget.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index dd41f61893ef..c6942d7fec47 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -545,15 +545,6 @@ static int usbhsg_pipe_disable(struct usbhsg_uep *uep) return 0; } -static void usbhsg_uep_init(struct usbhsg_gpriv *gpriv) -{ - int i; - struct usbhsg_uep *uep; - - usbhsg_for_each_uep_with_dcp(uep, gpriv, i) - uep->pipe = NULL; -} - /* * * usb_ep_ops @@ -761,7 +752,6 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status) usbhs_pipe_init(priv, usbhsg_dma_map_ctrl); usbhs_fifo_init(priv); - usbhsg_uep_init(gpriv); /* dcp init */ dcp->pipe = usbhs_dcp_malloc(priv); @@ -998,6 +988,7 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) */ usbhsg_for_each_uep_with_dcp(uep, gpriv, i) { uep->gpriv = gpriv; + uep->pipe = NULL; snprintf(uep->ep_name, EP_NAME_SIZE, "ep%d", i); uep->ep.name = uep->ep_name; From b33d74db39aae32e7d57265e25c94a488c42e37b Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 4 Dec 2012 14:26:11 +0100 Subject: [PATCH 005/553] USB: fix fsl_otg config dependency USB_GADGET_FSL_USB2 has been changed to USB_FSL_USB2 by commit 193ab2a6070039e7ee2b9b9bebea754a7c52fd1b (usb: gadget: allow multiple gadgets to be built). But old USB_GADGET_FSL_USB2 is still listed as dependency for fsl_otg driver, so the driver cannot be selected in the configuration currently. Fix it. Signed-off-by: Anatolij Gustschin Signed-off-by: Felipe Balbi --- drivers/usb/otg/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 6223062d5d1b..37962c99ff1e 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -110,7 +110,7 @@ config AB8500_USB config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 && USB_SUSPEND + depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND select USB_OTG select USB_OTG_UTILS help From e887786a466f36720fde5d4a1bc3c7dacd400bd1 Mon Sep 17 00:00:00 2001 From: Chao Xie Date: Tue, 27 Nov 2012 22:06:02 -0500 Subject: [PATCH 006/553] usb: gadget: mv_udc: fix the clk APIs the clock common driver changes, and arch-mmp will make use of the common clock driver instead of its own. So for enable clock. first prepare the clock then enable the clock. for disable clock first disable the clock then unprepare the clock Signed-off-by: Chao Xie Signed-off-by: Felipe Balbi --- drivers/usb/gadget/mv_udc_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index 379aac7b82fc..6e8b1272ebce 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -1012,7 +1012,7 @@ static void udc_clock_enable(struct mv_udc *udc) unsigned int i; for (i = 0; i < udc->clknum; i++) - clk_enable(udc->clk[i]); + clk_prepare_enable(udc->clk[i]); } static void udc_clock_disable(struct mv_udc *udc) @@ -1020,7 +1020,7 @@ static void udc_clock_disable(struct mv_udc *udc) unsigned int i; for (i = 0; i < udc->clknum; i++) - clk_disable(udc->clk[i]); + clk_disable_unprepare(udc->clk[i]); } static void udc_stop(struct mv_udc *udc) From c1a96ebd315f82fa0f47adce264adb126cf72764 Mon Sep 17 00:00:00 2001 From: Chao Xie Date: Tue, 27 Nov 2012 22:06:05 -0500 Subject: [PATCH 007/553] usb: host: ehci-mv: fix clk APIs the clock common driver changes, and arch-mmp will make use of the common clock driver instead of its own. So for enable clock. first prepare the clock then enable the clock. for disable clock first disable the clock then unprepare the clock Signed-off-by: Chao Xie Acked-by: Alan Stern Signed-off-by: Felipe Balbi --- drivers/usb/host/ehci-mv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c index f7bfc0b898b9..6c56297ea16b 100644 --- a/drivers/usb/host/ehci-mv.c +++ b/drivers/usb/host/ehci-mv.c @@ -43,7 +43,7 @@ static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv) unsigned int i; for (i = 0; i < ehci_mv->clknum; i++) - clk_enable(ehci_mv->clk[i]); + clk_prepare_enable(ehci_mv->clk[i]); } static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv) @@ -51,7 +51,7 @@ static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv) unsigned int i; for (i = 0; i < ehci_mv->clknum; i++) - clk_disable(ehci_mv->clk[i]); + clk_disable_unprepare(ehci_mv->clk[i]); } static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv) From 69f5165ebef1d90bd58e9ce5db018218ea4d089c Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Thu, 22 Nov 2012 13:55:16 +0530 Subject: [PATCH 008/553] usb: gadget: s3c-hsotg: Fix invalid free of devm_ allocated data Since hsotg object is allocated using devm_kzalloc() API, there is no need to free this explicitly. But we need to keep the release API to prevent warnings. Signed-off-by: Tushar Behera Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c-hsotg.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 141971d9051e..439c3f972f8c 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -3477,12 +3477,11 @@ static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) /** * s3c_hsotg_release - release callback for hsotg device * @dev: Device to for which release is called + * + * Nothing to do as the resource is allocated using devm_ API. */ static void s3c_hsotg_release(struct device *dev) { - struct s3c_hsotg *hsotg = dev_get_drvdata(dev); - - kfree(hsotg); } /** From d9fa298f215e050dbb28a6f75fe76459ebd2e7f0 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 10 Dec 2012 22:44:07 -0800 Subject: [PATCH 009/553] usb: renesas_usbhs: gadget: usbhsg_ep_disable() care pipe settings Current usbhsg_ep_disable() didn't care uep->pipe and pipe->mod_private variable which is used on usbhsg_ep_enable(). It breaks renesas_usbhs gadget when resume. This patch fixes it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/mod_gadget.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index c6942d7fec47..f2985cd88021 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -601,7 +601,12 @@ static int usbhsg_ep_disable(struct usb_ep *ep) { struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); - return usbhsg_pipe_disable(uep); + usbhsg_pipe_disable(uep); + + uep->pipe->mod_private = NULL; + uep->pipe = NULL; + + return 0; } static struct usb_request *usbhsg_ep_alloc_request(struct usb_ep *ep, @@ -753,7 +758,7 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status) usbhsg_dma_map_ctrl); usbhs_fifo_init(priv); - /* dcp init */ + /* dcp init instead of usbhsg_ep_enable() */ dcp->pipe = usbhs_dcp_malloc(priv); dcp->pipe->mod_private = dcp; usbhs_pipe_config_update(dcp->pipe, 0, 0, 64); @@ -815,7 +820,7 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status) usbhs_sys_set_test_mode(priv, 0); usbhs_sys_function_ctrl(priv, 0); - usbhsg_pipe_disable(dcp); + usbhsg_ep_disable(&dcp->ep); dev_dbg(dev, "stop gadget\n"); From e0b64ce6fe0a9d4ce8cf97fea7fe5ec7125dea30 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 9 Dec 2012 21:06:37 -0800 Subject: [PATCH 010/553] usb: renesas_usbhs: mod_host: fixup usbhsh_ureq_free() timing usbhsh_ureq_free() free ureq which includes ubshs_pkt. But current driver used usbhs_pkt after freed ureq. This patch fixup this bug. Special thanks to Chen Reported-by: Chen Gang Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/mod_host.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 3d3cd6ca2689..b86815421c8d 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -661,9 +661,10 @@ static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt) status = -ESHUTDOWN; urb->actual_length = pkt->actual; - usbhsh_ureq_free(hpriv, ureq); usbhsh_endpoint_sequence_save(hpriv, urb, pkt); + usbhsh_ureq_free(hpriv, ureq); + usbhsh_pipe_detach(hpriv, usbhsh_ep_to_uep(urb->ep)); usb_hcd_unlink_urb_from_ep(hcd, urb); From e3f1dbd21ddfaa22649b93212d5ac4b052c1e4a7 Mon Sep 17 00:00:00 2001 From: Chao Xie Date: Tue, 27 Nov 2012 22:06:04 -0500 Subject: [PATCH 011/553] usb: otg: mv_otg: fix the clk APIs the clock common driver changes, and arch-mmp will make use of the common clock driver instead of its own. So for enable clock. first prepare the clock then enable the clock. for disable clock first disable the clock then unprepare the clock Signed-off-by: Chao Xie Signed-off-by: Felipe Balbi --- drivers/usb/otg/mv_otg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c index 1dd57504186d..eace975991a8 100644 --- a/drivers/usb/otg/mv_otg.c +++ b/drivers/usb/otg/mv_otg.c @@ -240,7 +240,7 @@ static void otg_clock_enable(struct mv_otg *mvotg) unsigned int i; for (i = 0; i < mvotg->clknum; i++) - clk_enable(mvotg->clk[i]); + clk_prepare_enable(mvotg->clk[i]); } static void otg_clock_disable(struct mv_otg *mvotg) @@ -248,7 +248,7 @@ static void otg_clock_disable(struct mv_otg *mvotg) unsigned int i; for (i = 0; i < mvotg->clknum; i++) - clk_disable(mvotg->clk[i]); + clk_disable_unprepare(mvotg->clk[i]); } static int mv_otg_enable_internal(struct mv_otg *mvotg) From 1d16638e3b9cc195bac18a8fcbca748f33c1bc24 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 20 Nov 2012 13:23:15 +0100 Subject: [PATCH 012/553] usb: gadget: dummy: fix enumeration with g_multi If we do have endpoints named like "ep-a" then bEndpointAddress is counted internally by the gadget framework. If we do have endpoints named like "ep-1" then bEndpointAddress is assigned from the digit after "ep-". If we do have both, then it is likely that after we used up the "generic" endpoints we will use the digits and thus assign one bEndpointAddress to multiple endpoints. This theory can be proofed by using the completely enabled g_multi. Without this patch, the mass storage won't enumerate and times out because it shares endpoints with RNDIS. This patch also adds fills up the endpoints list so we have in total endpoints 1 to 15 in + out available while some of them are restricted to certain types like BULK or ISO. Without this change the nokia gadget won't load because the system does not provide enough (BULK) endpoints but it did before ep-a - ep-f were removed. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Acked-by: Alan Stern Signed-off-by: Felipe Balbi --- drivers/usb/gadget/dummy_hcd.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 95d584dbed13..8cf0c0f6fa1f 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -130,10 +130,7 @@ static const char ep0name[] = "ep0"; static const char *const ep_name[] = { ep0name, /* everyone has ep0 */ - /* act like a net2280: high speed, six configurable endpoints */ - "ep-a", "ep-b", "ep-c", "ep-d", "ep-e", "ep-f", - - /* or like pxa250: fifteen fixed function endpoints */ + /* act like a pxa250: fifteen fixed function endpoints */ "ep1in-bulk", "ep2out-bulk", "ep3in-iso", "ep4out-iso", "ep5in-int", "ep6in-bulk", "ep7out-bulk", "ep8in-iso", "ep9out-iso", "ep10in-int", "ep11in-bulk", "ep12out-bulk", "ep13in-iso", "ep14out-iso", @@ -141,6 +138,10 @@ static const char *const ep_name[] = { /* or like sa1100: two fixed function endpoints */ "ep1out-bulk", "ep2in-bulk", + + /* and now some generic EPs so we have enough in multi config */ + "ep3out", "ep4in", "ep5out", "ep6out", "ep7in", "ep8out", "ep9in", + "ep10out", "ep11out", "ep12in", "ep13out", "ep14in", "ep15out", }; #define DUMMY_ENDPOINTS ARRAY_SIZE(ep_name) From deeeb9ee1ed5b06864f530c6123976209badd489 Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Tue, 27 Nov 2012 20:15:22 +0530 Subject: [PATCH 013/553] usb: musb: dsps: header movement build error fix "54db6ee ARM: OMAP2+: Introduce local usb.h" moved control module bit definitions from plat/usb.h (which dsps glue was using) to a local header in mach-omap2. And in parallel, "c68bb4c usb: musb: dsps: control module handling (quirk)" added control module handling capability to dsps glue driver that used those control module bit definitions. Integration of above two changes would cause build error in musb dsps glue driver (they go through different trees upstream) as is seen now in linux-next. Fix it by adding necessary definitions in dsps glue driver. Signed-off-by: Afzal Mohammed Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_dsps.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index e6f2ae8368bb..f7d764de6fda 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -134,6 +134,11 @@ static const resource_size_t dsps_control_module_phys[] = { DSPS_AM33XX_CONTROL_MODULE_PHYS_1, }; +#define USBPHY_CM_PWRDN (1 << 0) +#define USBPHY_OTG_PWRDN (1 << 1) +#define USBPHY_OTGVDET_EN (1 << 19) +#define USBPHY_OTGSESSEND_EN (1 << 20) + /** * musb_dsps_phy_control - phy on/off * @glue: struct dsps_glue * From 25e14c1fcce5c66b0d2d5e35fad35d044dc320ae Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Thu, 15 Nov 2012 04:21:01 -0500 Subject: [PATCH 014/553] usb: gadget: amd5536udc: avoid NULL pointer dereference in udc_pci_probe() dev->pdev is NULL before `dev->pdev = pdev'; use pdev instead. Signed-off-by: Xi Wang Signed-off-by: Felipe Balbi --- drivers/usb/gadget/amd5536udc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index fc0ec5e0d58e..d9f6b9372491 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -3231,7 +3231,7 @@ static int udc_pci_probe( } if (!pdev->irq) { - dev_err(&dev->pdev->dev, "irq not set\n"); + dev_err(&pdev->dev, "irq not set\n"); kfree(dev); dev = NULL; retval = -ENODEV; @@ -3250,7 +3250,7 @@ static int udc_pci_probe( dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR); if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) { - dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq); + dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq); kfree(dev); dev = NULL; retval = -EBUSY; From 5dbd693576726bd7d3228ee614060e0817305dde Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 14 Nov 2012 13:47:23 +0800 Subject: [PATCH 015/553] usb: gadget: tcm_usb_gadge: fix to return error or 0 in tcm_usbg_drop_nexus() In the error handling case of tcm_usbg_drop_nexus(), the error code is assigned to 'ret', but it is ignored. We'd better return 'ret' instead of always return 0. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/gadget/tcm_usb_gadget.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c index 4f7f76f00c74..7cacd6ae818e 100644 --- a/drivers/usb/gadget/tcm_usb_gadget.c +++ b/drivers/usb/gadget/tcm_usb_gadget.c @@ -1794,9 +1794,10 @@ static int tcm_usbg_drop_nexus(struct usbg_tpg *tpg) tpg->tpg_nexus = NULL; kfree(tv_nexus); + ret = 0; out: mutex_unlock(&tpg->tpg_mutex); - return 0; + return ret; } static ssize_t tcm_usbg_tpg_store_nexus( From 484ca3a35b43a5127f0ef8e8c816f1b2ab6ce323 Mon Sep 17 00:00:00 2001 From: Haipeng YU Date: Wed, 14 Nov 2012 15:40:01 +0100 Subject: [PATCH 016/553] usb: gadget: u_serial: fix switch off blocked When a device is switched off by software, gserial_cleanup will be called, and switch off will be blocked in this function because wake_up_interruptible() in gs_close() can not wake_up the wait_event() in gserial_cleanup(), it should be changed to wake_up() to match the wait_event(). Signed-off-by: Haipeng YU Signed-off-by: Linus Walleij Signed-off-by: Felipe Balbi --- drivers/usb/gadget/u_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index d0f95482f40e..598dcc1212f0 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -887,7 +887,7 @@ static void gs_close(struct tty_struct *tty, struct file *file) pr_debug("gs_close: ttyGS%d (%p,%p) done!\n", port->port_num, tty, file); - wake_up_interruptible(&port->port.close_wait); + wake_up(&port->port.close_wait); exit: spin_unlock_irq(&port->port_lock); } From 2ac788f705e5118dd45204e7a5bc8d5bb6873835 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 14 Nov 2012 18:49:50 +0300 Subject: [PATCH 017/553] usb: musb: core: print new line in the driver banner again Commit 5c8a86e10a7c164f44537fabdc169fd8b4e7a440 (usb: musb: drop unneeded musb_debug trickery) erroneously removed '\n' from the driver's banner. Concatenate all the banner substrings while adding it back... Signed-off-by: Sergei Shtylyov Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 57cc9c6eaa9f..766dbda1981a 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2298,10 +2298,7 @@ static int __init musb_init(void) if (usb_disabled()) return 0; - pr_info("%s: version " MUSB_VERSION ", " - "?dma?" - ", " - "otg (peripheral+host)", + pr_info("%s: version " MUSB_VERSION ", ?dma?, otg (peripheral+host)\n", musb_driver_name); return platform_driver_register(&musb_driver); } From 9b132fbe5419d789f1ef396bed5eb66a365dd1e9 Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Tue, 4 Dec 2012 10:35:13 +0800 Subject: [PATCH 018/553] Add rcu user eqs exception hooks for async page fault This patch adds user eqs exception hooks for async page fault page not present code path, to exit the user eqs and re-enter it as necessary. Async page fault is different from other exceptions that it may be triggered from idle process, so we still need rcu_irq_enter() and rcu_irq_exit() to exit cpu idle eqs when needed, to protect the code that needs use rcu. As Frederic pointed out it would be safest and simplest to protect the whole kvm_async_pf_task_wait(). Otherwise, "we need to check all the code there deeply for potential RCU uses and ensure it will never be extended later to use RCU.". However, We'd better re-enter the cpu idle eqs if we get the exception in cpu idle eqs, by calling rcu_irq_exit() before native_safe_halt(). So the patch does what Frederic suggested for rcu_irq_*() API usage here, except that I moved the rcu_irq_*() pair originally in do_async_page_fault() into kvm_async_pf_task_wait(). That's because, I think it's better to have rcu_irq_*() pairs to be in one function ( rcu_irq_exit() after rcu_irq_enter() ), especially here, kvm_async_pf_task_wait() has other callers, which might cause rcu_irq_exit() be called without a matching rcu_irq_enter() before it, which is illegal if the cpu happens to be in rcu idle state. Signed-off-by: Li Zhong Signed-off-by: Gleb Natapov --- arch/x86/kernel/kvm.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index 08b973f64032..9c2bd8bd4b4c 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -43,6 +43,7 @@ #include #include #include +#include static int kvmapf = 1; @@ -121,6 +122,8 @@ void kvm_async_pf_task_wait(u32 token) struct kvm_task_sleep_node n, *e; DEFINE_WAIT(wait); + rcu_irq_enter(); + spin_lock(&b->lock); e = _find_apf_task(b, token); if (e) { @@ -128,6 +131,8 @@ void kvm_async_pf_task_wait(u32 token) hlist_del(&e->link); kfree(e); spin_unlock(&b->lock); + + rcu_irq_exit(); return; } @@ -152,13 +157,16 @@ void kvm_async_pf_task_wait(u32 token) /* * We cannot reschedule. So halt. */ + rcu_irq_exit(); native_safe_halt(); + rcu_irq_enter(); local_irq_disable(); } } if (!n.halted) finish_wait(&n.wq, &wait); + rcu_irq_exit(); return; } EXPORT_SYMBOL_GPL(kvm_async_pf_task_wait); @@ -252,10 +260,10 @@ do_async_page_fault(struct pt_regs *regs, unsigned long error_code) break; case KVM_PV_REASON_PAGE_NOT_PRESENT: /* page is swapped out by the host. */ - rcu_irq_enter(); + exception_enter(regs); exit_idle(); kvm_async_pf_task_wait((u32)read_cr2()); - rcu_irq_exit(); + exception_exit(regs); break; case KVM_PV_REASON_PAGE_READY: rcu_irq_enter(); From 1509ae56cdc19a12f76000e31602e4119fffc571 Mon Sep 17 00:00:00 2001 From: Bharat Bhushan Date: Tue, 18 Dec 2012 01:21:28 +0000 Subject: [PATCH 019/553] powerpc: Corrected include header path in kvm_para.h The include/uapi/asm/kvm_para.h includes but the correct reference should be as this is the place where make install_header installs the header files for userspace. Signed-off-by: Bharat Bhushan CC: stable@vger.kernel.org Signed-off-by: Alexander Graf --- arch/powerpc/include/uapi/asm/kvm_para.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/include/uapi/asm/kvm_para.h b/arch/powerpc/include/uapi/asm/kvm_para.h index ed0e0254b47f..e3af3286a068 100644 --- a/arch/powerpc/include/uapi/asm/kvm_para.h +++ b/arch/powerpc/include/uapi/asm/kvm_para.h @@ -78,7 +78,7 @@ struct kvm_vcpu_arch_shared { #define KVM_HCALL_TOKEN(num) _EV_HCALL_TOKEN(EV_KVM_VENDOR_ID, num) -#include +#include #define KVM_FEATURE_MAGIC_PAGE 1 From 08b27848da620f206a8b6d80f26184485dd7aa40 Mon Sep 17 00:00:00 2001 From: Patrick Lai Date: Wed, 19 Dec 2012 19:36:02 -0800 Subject: [PATCH 020/553] ASoC: pcm: allow backend hardware to be freed in pause state When front-end PCM session is in paused state, back-end PCM session will be put in paused state as well if given front-end PCM session is the only client of given back-end. Then, application closes front-end PCM session, DPCM framework will not allow back-end enters HW_FREE state so back-end will never get shutdown completely. Signed-off-by: Patrick Lai Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/soc-pcm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index d7711fce119b..cf191e6aebbe 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -1243,6 +1243,7 @@ static int dpcm_be_dai_hw_free(struct snd_soc_pcm_runtime *fe, int stream) if ((be->dpcm[stream].state != SND_SOC_DPCM_STATE_HW_PARAMS) && (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PREPARE) && (be->dpcm[stream].state != SND_SOC_DPCM_STATE_HW_FREE) && + (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PAUSED) && (be->dpcm[stream].state != SND_SOC_DPCM_STATE_STOP)) continue; From ad1937cdd59c412097ec2bb8f38c12a5640f1f9a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 20 Dec 2012 16:17:25 +0800 Subject: [PATCH 021/553] ASoC: sta529: Fix update register bits in sta529_set_dai_fmt Both the mask and mode settings are wrong in current code. According to the datasheet: S2PCFG0 (0x0A) BIT[3:1] DATA_FORMAT serial interface protocol format: 000: left Justified 001: I2S (default) 010: right justified 100: PCM no delay 101: PCM delay 111: DSP Thus fixes the defines for LEFT_J_DATA_FORMAT, I2S_DATA_FORMAT, and RIGHT_J_DATA_FORMAT. Also adds define for DATA_FORMAT_MSK. Signed-off-by: Axel Lin Acked-by: Rajeev Kumar Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/sta529.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/sta529.c b/sound/soc/codecs/sta529.c index ab355c4f0b2d..40c07be9b581 100644 --- a/sound/soc/codecs/sta529.c +++ b/sound/soc/codecs/sta529.c @@ -74,9 +74,10 @@ SNDRV_PCM_FMTBIT_S32_LE) #define S2PC_VALUE 0x98 #define CLOCK_OUT 0x60 -#define LEFT_J_DATA_FORMAT 0x10 -#define I2S_DATA_FORMAT 0x12 -#define RIGHT_J_DATA_FORMAT 0x14 +#define DATA_FORMAT_MSK 0x0E +#define LEFT_J_DATA_FORMAT 0x00 +#define I2S_DATA_FORMAT 0x02 +#define RIGHT_J_DATA_FORMAT 0x04 #define CODEC_MUTE_VAL 0x80 #define POWER_CNTLMSAK 0x40 @@ -289,7 +290,7 @@ static int sta529_set_dai_fmt(struct snd_soc_dai *codec_dai, u32 fmt) return -EINVAL; } - snd_soc_update_bits(codec, STA529_S2PCFG0, 0x0D, mode); + snd_soc_update_bits(codec, STA529_S2PCFG0, DATA_FORMAT_MSK, mode); return 0; } From 9bde4f0b1c83d1129a9fc8ec5b2611ba6dab1215 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 19 Dec 2012 16:05:00 +0000 Subject: [PATCH 022/553] ASoC: core: Fix SOC_DOUBLE_RANGE() macros Although we've had macros defining double _RANGE controls for a while now they've not actually been backed up properly by the implementation, it's treated everything as mono. Fix that by implementing the handling in the stereo controls, ensuring that the mono controls don't mistakenly get treated as stereo. Signed-off-by: Mark Brown Acked-by: Liam Girdwood --- include/sound/soc.h | 10 ++++++---- sound/soc/soc-core.c | 32 ++++++++++++++++++++++++++++++-- 2 files changed, 36 insertions(+), 6 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index 769e27c774a3..bc56738cb109 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -58,8 +58,9 @@ .info = snd_soc_info_volsw_range, .get = snd_soc_get_volsw_range, \ .put = snd_soc_put_volsw_range, \ .private_value = (unsigned long)&(struct soc_mixer_control) \ - {.reg = xreg, .shift = xshift, .min = xmin,\ - .max = xmax, .platform_max = xmax, .invert = xinvert} } + {.reg = xreg, .rreg = xreg, .shift = xshift, \ + .rshift = xshift, .min = xmin, .max = xmax, \ + .platform_max = xmax, .invert = xinvert} } #define SOC_SINGLE_TLV(xname, reg, shift, max, invert, tlv_array) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ @@ -88,8 +89,9 @@ .info = snd_soc_info_volsw_range, \ .get = snd_soc_get_volsw_range, .put = snd_soc_put_volsw_range, \ .private_value = (unsigned long)&(struct soc_mixer_control) \ - {.reg = xreg, .shift = xshift, .min = xmin,\ - .max = xmax, .platform_max = xmax, .invert = xinvert} } + {.reg = xreg, .rreg = xreg, .shift = xshift, \ + .rshift = xshift, .min = xmin, .max = xmax, \ + .platform_max = xmax, .invert = xinvert} } #define SOC_DOUBLE(xname, reg, shift_left, shift_right, max, invert) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\ .info = snd_soc_info_volsw, .get = snd_soc_get_volsw, \ diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 91d592ff67b7..e0d4630bfb4f 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2917,7 +2917,7 @@ int snd_soc_info_volsw_range(struct snd_kcontrol *kcontrol, platform_max = mc->platform_max; uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; - uinfo->count = 1; + uinfo->count = snd_soc_volsw_is_stereo(mc) ? 2 : 1; uinfo->value.integer.min = 0; uinfo->value.integer.max = platform_max - min; @@ -2941,12 +2941,14 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol, (struct soc_mixer_control *)kcontrol->private_value; struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); unsigned int reg = mc->reg; + unsigned int rreg = mc->rreg; unsigned int shift = mc->shift; int min = mc->min; int max = mc->max; unsigned int mask = (1 << fls(max)) - 1; unsigned int invert = mc->invert; unsigned int val, val_mask; + int ret; val = ((ucontrol->value.integer.value[0] + min) & mask); if (invert) @@ -2954,7 +2956,21 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol, val_mask = mask << shift; val = val << shift; - return snd_soc_update_bits_locked(codec, reg, val_mask, val); + ret = snd_soc_update_bits_locked(codec, reg, val_mask, val); + if (ret != 0) + return ret; + + if (snd_soc_volsw_is_stereo(mc)) { + val = ((ucontrol->value.integer.value[1] + min) & mask); + if (invert) + val = max - val; + val_mask = mask << shift; + val = val << shift; + + ret = snd_soc_update_bits_locked(codec, rreg, val_mask, val); + } + + return ret; } EXPORT_SYMBOL_GPL(snd_soc_put_volsw_range); @@ -2974,11 +2990,13 @@ int snd_soc_get_volsw_range(struct snd_kcontrol *kcontrol, (struct soc_mixer_control *)kcontrol->private_value; struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); unsigned int reg = mc->reg; + unsigned int rreg = mc->rreg; unsigned int shift = mc->shift; int min = mc->min; int max = mc->max; unsigned int mask = (1 << fls(max)) - 1; unsigned int invert = mc->invert; + int ret; ucontrol->value.integer.value[0] = (snd_soc_read(codec, reg) >> shift) & mask; @@ -2988,6 +3006,16 @@ int snd_soc_get_volsw_range(struct snd_kcontrol *kcontrol, ucontrol->value.integer.value[0] = ucontrol->value.integer.value[0] - min; + if (snd_soc_volsw_is_stereo(mc)) { + ucontrol->value.integer.value[1] = + (snd_soc_read(codec, rreg) >> shift) & mask; + if (invert) + ucontrol->value.integer.value[1] = + max - ucontrol->value.integer.value[1]; + ucontrol->value.integer.value[1] = + ucontrol->value.integer.value[1] - min; + } + return 0; } EXPORT_SYMBOL_GPL(snd_soc_get_volsw_range); From 886d751a2ea99a160f2d0a472231566d9cb0cf58 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Thu, 20 Dec 2012 14:11:33 -0500 Subject: [PATCH 023/553] x86, efi: correct precedence of operators in setup_efi_pci With the current code, the condition in the if() doesn't make much sense due to precedence of operators. Signed-off-by: Sasha Levin Link: http://lkml.kernel.org/r/1356030701-16284-25-git-send-email-sasha.levin@oracle.com Cc: Matt Fleming Cc: Matthew Garrett Cc: Bjorn Helgaas Cc: Seth Forshee Signed-off-by: H. Peter Anvin --- arch/x86/boot/compressed/eboot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index b1942e222768..18e329ca108e 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -302,7 +302,7 @@ static efi_status_t setup_efi_pci(struct boot_params *params) if (status != EFI_SUCCESS) continue; - if (!attributes & EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM) + if (!(attributes & EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM)) continue; if (!pci->romimage || !pci->romsize) From 2a5f431592343b78896013b055582f94c12a5049 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 21 Dec 2012 16:28:37 +0800 Subject: [PATCH 024/553] ASoC: wm2200: Fix setting dai format in wm2200_set_fmt According to the defines in wm2200.h: /* * R1284 (0x504) - Audio IF 1_5 */ We should not left shift 1 bit for fmt_val when setting dai format. Signed-off-by: Axel Lin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm2200.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm2200.c b/sound/soc/codecs/wm2200.c index afcf31df77e0..a12fc2fa3971 100644 --- a/sound/soc/codecs/wm2200.c +++ b/sound/soc/codecs/wm2200.c @@ -1626,7 +1626,7 @@ static int wm2200_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) WM2200_AIF1TX_LRCLK_MSTR | WM2200_AIF1TX_LRCLK_INV, lrclk); snd_soc_update_bits(codec, WM2200_AUDIO_IF_1_5, - WM2200_AIF1_FMT_MASK << 1, fmt_val << 1); + WM2200_AIF1_FMT_MASK, fmt_val); return 0; } From 98fd485795db064d0885150e2c0c7f296d8fe06e Mon Sep 17 00:00:00 2001 From: Jacob Schloss Date: Sun, 9 Dec 2012 20:18:25 -0300 Subject: [PATCH 025/553] [media] gspca_kinect: add Kinect for Windows USB id Add the USB ID for the Kinect for Windows RGB camera so it can be used with the gspca_kinect driver. Signed-off-by: Jacob Schloss Signed-off-by: Antonio Ospite Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/gspca/kinect.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/usb/gspca/kinect.c b/drivers/media/usb/gspca/kinect.c index 40ad6687ee5d..3773a8a745df 100644 --- a/drivers/media/usb/gspca/kinect.c +++ b/drivers/media/usb/gspca/kinect.c @@ -381,6 +381,7 @@ static const struct sd_desc sd_desc = { /* -- module initialisation -- */ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x045e, 0x02ae)}, + {USB_DEVICE(0x045e, 0x02bf)}, {} }; From 2756442e48ab5012b135b9304133d4bc0ebffb17 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 21 Dec 2012 08:08:47 -0300 Subject: [PATCH 026/553] [media] gspca_sonixb: Properly wait between i2c writes We must wait for the previous i2c write to complete before starting a new one. Sofar we were getting away with this, but it seems that some parts of the usb-subsystem has been sped up making us go to fast :) This fixes streaming on sn9c103 based cams not working with an "i2c_w error" error. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/gspca/sonixb.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/media/usb/gspca/sonixb.c b/drivers/media/usb/gspca/sonixb.c index 70511d5f9538..1220340e7602 100644 --- a/drivers/media/usb/gspca/sonixb.c +++ b/drivers/media/usb/gspca/sonixb.c @@ -496,7 +496,7 @@ static void reg_w(struct gspca_dev *gspca_dev, } } -static void i2c_w(struct gspca_dev *gspca_dev, const __u8 *buffer) +static void i2c_w(struct gspca_dev *gspca_dev, const u8 *buf) { int retry = 60; @@ -504,16 +504,19 @@ static void i2c_w(struct gspca_dev *gspca_dev, const __u8 *buffer) return; /* is i2c ready */ - reg_w(gspca_dev, 0x08, buffer, 8); + reg_w(gspca_dev, 0x08, buf, 8); while (retry--) { if (gspca_dev->usb_err < 0) return; - msleep(10); + msleep(1); reg_r(gspca_dev, 0x08); if (gspca_dev->usb_buf[0] & 0x04) { if (gspca_dev->usb_buf[0] & 0x08) { dev_err(gspca_dev->v4l2_dev.dev, - "i2c write error\n"); + "i2c error writing %02x %02x %02x %02x" + " %02x %02x %02x %02x\n", + buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7]); gspca_dev->usb_err = -EIO; } return; @@ -530,7 +533,7 @@ static void i2c_w_vector(struct gspca_dev *gspca_dev, for (;;) { if (gspca_dev->usb_err < 0) return; - reg_w(gspca_dev, 0x08, *buffer, 8); + i2c_w(gspca_dev, *buffer); len -= 8; if (len <= 0) break; From 38e91c6b1279b8ba5e798d35d5647b38f3ae66ea Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 21 Dec 2012 11:17:42 -0300 Subject: [PATCH 027/553] [media] gspca_sonixj: Add a small delay after i2c_w1 We already have the same delay in i2c_w8, but it was missing from i2c_w1, adding this delay fixes the Microsoft VX-3000 camera often (but not always) streaming video data with a very green-ish tint. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/gspca/sonixj.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/usb/gspca/sonixj.c b/drivers/media/usb/gspca/sonixj.c index 5a86047b846f..36307a9028a9 100644 --- a/drivers/media/usb/gspca/sonixj.c +++ b/drivers/media/usb/gspca/sonixj.c @@ -1550,6 +1550,7 @@ static void i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val) 0, gspca_dev->usb_buf, 8, 500); + msleep(2); if (ret < 0) { pr_err("i2c_w1 err %d\n", ret); gspca_dev->usb_err = ret; From 5db1bc1892aa70d378ea7563852ae87f3772519b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 22 Dec 2012 10:38:14 -0200 Subject: [PATCH 028/553] ASoC: soc-core: Remove unused 'ret' variable commit 9bde4f0b1c (ASoC: core: Fix SOC_DOUBLE_RANGE() macros) introduced the following build warning: sound/soc/soc-core.c:2999:6: warning: unused variable 'ret' [-Wunused-variable] Remove the unused 'ret' variable. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index e0d4630bfb4f..29046e750ad7 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2996,7 +2996,6 @@ int snd_soc_get_volsw_range(struct snd_kcontrol *kcontrol, int max = mc->max; unsigned int mask = (1 << fls(max)) - 1; unsigned int invert = mc->invert; - int ret; ucontrol->value.integer.value[0] = (snd_soc_read(codec, reg) >> shift) & mask; From b50684da6cd5a9ec47ea5556bc9f5461c1d7017c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 23 Dec 2012 15:45:31 -0200 Subject: [PATCH 029/553] ASoC: sgtl5000: Fix maximum value for microphone gain sgtl5000 microphone gain only has 2 bits of resolution, so maximum value is 3. From Eric Nelson: "We also found that for the microphones we have here (commodity PC boom mics) a default value of 2 for the gain gives the best results." So change the default microphone gain as well. Signed-off-by: Eric Nelson Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/codecs/sgtl5000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index cb1675cd8e1c..92bbfec9b107 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -401,7 +401,7 @@ static const struct snd_kcontrol_new sgtl5000_snd_controls[] = { 5, 1, 0), SOC_SINGLE_TLV("Mic Volume", SGTL5000_CHIP_MIC_CTRL, - 0, 4, 0, mic_gain_tlv), + 0, 3, 0, mic_gain_tlv), }; /* mute the codec used by alsa core */ @@ -1344,7 +1344,7 @@ static int sgtl5000_probe(struct snd_soc_codec *codec) SGTL5000_HP_ZCD_EN | SGTL5000_ADC_ZCD_EN); - snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 0); + snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 2); /* * disable DAP From ec20f2f8d3714cfb491a138eb4c0c720577d49e6 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 21 Dec 2012 09:19:20 +0800 Subject: [PATCH 030/553] ASoC: lm49453: Fix mask for setting mode bit in lm49453_set_dai_fmt() The mode variable is either 0 or 1. To update mode setting, the mask should be BIT(0) rather than BIT(1). Signed-off-by: Axel Lin Tested-by: Omair M. Abdullah Signed-off-by: Mark Brown --- sound/soc/codecs/lm49453.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/lm49453.c b/sound/soc/codecs/lm49453.c index d75257d40a49..c0d203bfe5f0 100644 --- a/sound/soc/codecs/lm49453.c +++ b/sound/soc/codecs/lm49453.c @@ -1218,7 +1218,7 @@ static int lm49453_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) } snd_soc_update_bits(codec, LM49453_P0_AUDIO_PORT1_BASIC_REG, - LM49453_AUDIO_PORT1_BASIC_FMT_MASK|BIT(1)|BIT(5), + LM49453_AUDIO_PORT1_BASIC_FMT_MASK|BIT(0)|BIT(5), (aif_val | mode | clk_phase)); snd_soc_write(codec, LM49453_P0_AUDIO_PORT1_RX_MSB_REG, clk_shift); From 7110a287ff2b1f3780905d1686a1a4edccb95133 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 20 Dec 2012 23:29:42 +0800 Subject: [PATCH 031/553] ASoC: arizona: Do proper shift for setting AIF rate ARIZONA_AIF1_RATE_MASK is 0x7800 /* AIF1_RATE - [14:11] */ Thus we need left shift ARIZONA_AIF1_RATE_SHIFT when setting aif1 rate. Signed-off-by: Axel Lin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/arizona.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c index adf397b9d0e6..38248a7a95e3 100644 --- a/sound/soc/codecs/arizona.c +++ b/sound/soc/codecs/arizona.c @@ -714,7 +714,8 @@ static int arizona_hw_params(struct snd_pcm_substream *substream, snd_soc_update_bits(codec, ARIZONA_ASYNC_SAMPLE_RATE_1, ARIZONA_ASYNC_SAMPLE_RATE_MASK, sr_val); snd_soc_update_bits(codec, base + ARIZONA_AIF_RATE_CTRL, - ARIZONA_AIF1_RATE_MASK, 8); + ARIZONA_AIF1_RATE_MASK, + 8 << ARIZONA_AIF1_RATE_SHIFT); break; default: arizona_aif_err(dai, "Invalid clock %d\n", dai_priv->clk); From a8c02db029385fb4426e0396e108ab23cd08f384 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 18 Dec 2012 14:05:01 +0000 Subject: [PATCH 032/553] ASoC: arizona: Correct FLL source definitions The FLL source constants were numbered as a simple enumeration but were being used in the code as direct values to be written to the registers. Renumber the constants to reflect the usage. Reported-by: Ryo Tsutsui Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/arizona.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/sound/soc/codecs/arizona.h b/sound/soc/codecs/arizona.h index 41dae1ed3b71..4deebeb07177 100644 --- a/sound/soc/codecs/arizona.h +++ b/sound/soc/codecs/arizona.h @@ -34,15 +34,15 @@ #define ARIZONA_FLL_SRC_MCLK1 0 #define ARIZONA_FLL_SRC_MCLK2 1 -#define ARIZONA_FLL_SRC_SLIMCLK 2 -#define ARIZONA_FLL_SRC_FLL1 3 -#define ARIZONA_FLL_SRC_FLL2 4 -#define ARIZONA_FLL_SRC_AIF1BCLK 5 -#define ARIZONA_FLL_SRC_AIF2BCLK 6 -#define ARIZONA_FLL_SRC_AIF3BCLK 7 -#define ARIZONA_FLL_SRC_AIF1LRCLK 8 -#define ARIZONA_FLL_SRC_AIF2LRCLK 9 -#define ARIZONA_FLL_SRC_AIF3LRCLK 10 +#define ARIZONA_FLL_SRC_SLIMCLK 3 +#define ARIZONA_FLL_SRC_FLL1 4 +#define ARIZONA_FLL_SRC_FLL2 5 +#define ARIZONA_FLL_SRC_AIF1BCLK 8 +#define ARIZONA_FLL_SRC_AIF2BCLK 9 +#define ARIZONA_FLL_SRC_AIF3BCLK 10 +#define ARIZONA_FLL_SRC_AIF1LRCLK 12 +#define ARIZONA_FLL_SRC_AIF2LRCLK 13 +#define ARIZONA_FLL_SRC_AIF3LRCLK 14 #define ARIZONA_MIXER_VOL_MASK 0x00FE #define ARIZONA_MIXER_VOL_SHIFT 1 From 88ac43924b396e524288570ed3b11e8c94c1191f Mon Sep 17 00:00:00 2001 From: "MR.Swami.Reddy@ti.com" Date: Fri, 7 Dec 2012 17:00:10 +0530 Subject: [PATCH 033/553] ASoC: lm49453: Fix adc, mic and sidetone volume ranges Add adc, mic, sidetone volume ranges and appropriately added the controls. Fix the DAC HP/EP/LS/LO/HA maximum gain values. Signed-off-by: MR Swami Reddy Tested-by: Vinod Koul -- sound/soc/codecs/lm49453.c | 43 ++++++++++++++++++++++++------------------- 1 files changed, 24 insertions(+), 19 deletions(-) Signed-off-by: Mark Brown --- sound/soc/codecs/lm49453.c | 43 +++++++++++++++++++++----------------- 1 file changed, 24 insertions(+), 19 deletions(-) diff --git a/sound/soc/codecs/lm49453.c b/sound/soc/codecs/lm49453.c index c0d203bfe5f0..f34832851785 100644 --- a/sound/soc/codecs/lm49453.c +++ b/sound/soc/codecs/lm49453.c @@ -525,36 +525,41 @@ SOC_DAPM_SINGLE("Port2_2 Switch", LM49453_P0_PORT2_TX2_REG, 7, 1, 0), }; /* TLV Declarations */ -static const DECLARE_TLV_DB_SCALE(digital_tlv, -7650, 150, 1); -static const DECLARE_TLV_DB_SCALE(port_tlv, 0, 600, 0); +static const DECLARE_TLV_DB_SCALE(adc_dac_tlv, -7650, 150, 1); +static const DECLARE_TLV_DB_SCALE(mic_tlv, 0, 200, 1); +static const DECLARE_TLV_DB_SCALE(port_tlv, -1800, 600, 0); +static const DECLARE_TLV_DB_SCALE(stn_tlv, -7200, 150, 0); static const struct snd_kcontrol_new lm49453_sidetone_mixer_controls[] = { /* Sidetone supports mono only */ SOC_DAPM_SINGLE_TLV("Sidetone ADCL Volume", LM49453_P0_STN_VOL_ADCL_REG, - 0, 0x3F, 0, digital_tlv), + 0, 0x3F, 0, stn_tlv), SOC_DAPM_SINGLE_TLV("Sidetone ADCR Volume", LM49453_P0_STN_VOL_ADCR_REG, - 0, 0x3F, 0, digital_tlv), + 0, 0x3F, 0, stn_tlv), SOC_DAPM_SINGLE_TLV("Sidetone DMIC1L Volume", LM49453_P0_STN_VOL_DMIC1L_REG, - 0, 0x3F, 0, digital_tlv), + 0, 0x3F, 0, stn_tlv), SOC_DAPM_SINGLE_TLV("Sidetone DMIC1R Volume", LM49453_P0_STN_VOL_DMIC1R_REG, - 0, 0x3F, 0, digital_tlv), + 0, 0x3F, 0, stn_tlv), SOC_DAPM_SINGLE_TLV("Sidetone DMIC2L Volume", LM49453_P0_STN_VOL_DMIC2L_REG, - 0, 0x3F, 0, digital_tlv), + 0, 0x3F, 0, stn_tlv), SOC_DAPM_SINGLE_TLV("Sidetone DMIC2R Volume", LM49453_P0_STN_VOL_DMIC2R_REG, - 0, 0x3F, 0, digital_tlv), + 0, 0x3F, 0, stn_tlv), }; static const struct snd_kcontrol_new lm49453_snd_controls[] = { /* mic1 and mic2 supports mono only */ - SOC_SINGLE_TLV("Mic1 Volume", LM49453_P0_ADC_LEVELL_REG, 0, 6, - 0, digital_tlv), - SOC_SINGLE_TLV("Mic2 Volume", LM49453_P0_ADC_LEVELR_REG, 0, 6, - 0, digital_tlv), + SOC_SINGLE_TLV("Mic1 Volume", LM49453_P0_MICL_REG, 0, 15, 0, mic_tlv), + SOC_SINGLE_TLV("Mic2 Volume", LM49453_P0_MICR_REG, 0, 15, 0, mic_tlv), + + SOC_SINGLE_TLV("ADCL Volume", LM49453_P0_ADC_LEVELL_REG, 0, 63, + 0, adc_dac_tlv), + SOC_SINGLE_TLV("ADCR Volume", LM49453_P0_ADC_LEVELR_REG, 0, 63, + 0, adc_dac_tlv), SOC_DOUBLE_R_TLV("DMIC1 Volume", LM49453_P0_DMIC1_LEVELL_REG, - LM49453_P0_DMIC1_LEVELR_REG, 0, 6, 0, digital_tlv), + LM49453_P0_DMIC1_LEVELR_REG, 0, 63, 0, adc_dac_tlv), SOC_DOUBLE_R_TLV("DMIC2 Volume", LM49453_P0_DMIC2_LEVELL_REG, - LM49453_P0_DMIC2_LEVELR_REG, 0, 6, 0, digital_tlv), + LM49453_P0_DMIC2_LEVELR_REG, 0, 63, 0, adc_dac_tlv), SOC_DAPM_ENUM("Mic2Mode", lm49453_mic2mode_enum), SOC_DAPM_ENUM("DMIC12 SRC", lm49453_dmic12_cfg_enum), @@ -569,16 +574,16 @@ static const struct snd_kcontrol_new lm49453_snd_controls[] = { 2, 1, 0), SOC_DOUBLE_R_TLV("DAC HP Volume", LM49453_P0_DAC_HP_LEVELL_REG, - LM49453_P0_DAC_HP_LEVELR_REG, 0, 6, 0, digital_tlv), + LM49453_P0_DAC_HP_LEVELR_REG, 0, 63, 0, adc_dac_tlv), SOC_DOUBLE_R_TLV("DAC LO Volume", LM49453_P0_DAC_LO_LEVELL_REG, - LM49453_P0_DAC_LO_LEVELR_REG, 0, 6, 0, digital_tlv), + LM49453_P0_DAC_LO_LEVELR_REG, 0, 63, 0, adc_dac_tlv), SOC_DOUBLE_R_TLV("DAC LS Volume", LM49453_P0_DAC_LS_LEVELL_REG, - LM49453_P0_DAC_LS_LEVELR_REG, 0, 6, 0, digital_tlv), + LM49453_P0_DAC_LS_LEVELR_REG, 0, 63, 0, adc_dac_tlv), SOC_DOUBLE_R_TLV("DAC HA Volume", LM49453_P0_DAC_HA_LEVELL_REG, - LM49453_P0_DAC_HA_LEVELR_REG, 0, 6, 0, digital_tlv), + LM49453_P0_DAC_HA_LEVELR_REG, 0, 63, 0, adc_dac_tlv), SOC_SINGLE_TLV("EP Volume", LM49453_P0_DAC_LS_LEVELL_REG, - 0, 6, 0, digital_tlv), + 0, 63, 0, adc_dac_tlv), SOC_SINGLE_TLV("PORT1_1_RX_LVL Volume", LM49453_P0_PORT1_RX_LVL1_REG, 0, 3, 0, port_tlv), From 9dc754dfa78ca4ef9a117245e5ae3b9b7312d59d Mon Sep 17 00:00:00 2001 From: "MR.Swami.Reddy@ti.com" Date: Fri, 7 Dec 2012 17:06:54 +0530 Subject: [PATCH 034/553] ASoC: lm49453: Update lm49453_reg_defs values as per LM49453 HW revision-B Update lm49453_reg_defs values as per LM49453 HW revision-B Signed-off-by: M R Swami Reddy Signed-off-by: Mark Brown --- sound/soc/codecs/lm49453.c | 61 ++++++++++---------------------------- 1 file changed, 15 insertions(+), 46 deletions(-) diff --git a/sound/soc/codecs/lm49453.c b/sound/soc/codecs/lm49453.c index f34832851785..e19490cfb3a8 100644 --- a/sound/soc/codecs/lm49453.c +++ b/sound/soc/codecs/lm49453.c @@ -111,9 +111,9 @@ static struct reg_default lm49453_reg_defs[] = { { 101, 0x00 }, { 102, 0x00 }, { 103, 0x01 }, - { 105, 0x01 }, - { 106, 0x00 }, - { 107, 0x01 }, + { 104, 0x01 }, + { 105, 0x00 }, + { 106, 0x01 }, { 107, 0x00 }, { 108, 0x00 }, { 109, 0x00 }, @@ -163,56 +163,25 @@ static struct reg_default lm49453_reg_defs[] = { { 184, 0x00 }, { 185, 0x00 }, { 186, 0x00 }, - { 189, 0x00 }, + { 187, 0x00 }, { 188, 0x00 }, - { 194, 0x00 }, - { 195, 0x00 }, - { 196, 0x00 }, - { 197, 0x00 }, - { 200, 0x00 }, - { 201, 0x00 }, - { 202, 0x00 }, - { 203, 0x00 }, - { 204, 0x00 }, - { 205, 0x00 }, - { 208, 0x00 }, + { 189, 0x00 }, + { 208, 0x06 }, { 209, 0x00 }, - { 210, 0x00 }, - { 211, 0x00 }, - { 213, 0x00 }, - { 214, 0x00 }, - { 215, 0x00 }, - { 216, 0x00 }, - { 217, 0x00 }, - { 218, 0x00 }, - { 219, 0x00 }, + { 210, 0x08 }, + { 211, 0x54 }, + { 212, 0x14 }, + { 213, 0x0d }, + { 214, 0x0d }, + { 215, 0x14 }, + { 216, 0x60 }, { 221, 0x00 }, { 222, 0x00 }, + { 223, 0x00 }, { 224, 0x00 }, - { 225, 0x00 }, - { 226, 0x00 }, - { 227, 0x00 }, - { 228, 0x00 }, - { 229, 0x00 }, - { 230, 0x13 }, - { 231, 0x00 }, - { 232, 0x80 }, - { 233, 0x0C }, - { 234, 0xDD }, - { 235, 0x00 }, - { 236, 0x04 }, - { 237, 0x00 }, - { 238, 0x00 }, - { 239, 0x00 }, - { 240, 0x00 }, - { 241, 0x00 }, - { 242, 0x00 }, - { 243, 0x00 }, - { 244, 0x00 }, - { 245, 0x00 }, { 248, 0x00 }, { 249, 0x00 }, - { 254, 0x00 }, + { 250, 0x00 }, { 255, 0x00 }, }; From 3271a4fc7daeb489bfe1730023c166065e6fb0e7 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 20 Dec 2012 16:53:16 +0800 Subject: [PATCH 035/553] ASoC: cs42l52: Catch no-match case in cs42l52_get_clk In the case of no-match, return -EINVAL instead of 0. Since we assign i to ret in the for loop, ret always less than ARRAY_SIZE(clk_map_table). Thus remove the boundary checking for ret. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/codecs/cs42l52.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 99bb1c69499e..9811a5478c87 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -737,7 +737,7 @@ static const struct cs42l52_clk_para clk_map_table[] = { static int cs42l52_get_clk(int mclk, int rate) { - int i, ret = 0; + int i, ret = -EINVAL; u_int mclk1, mclk2 = 0; for (i = 0; i < ARRAY_SIZE(clk_map_table); i++) { @@ -749,8 +749,6 @@ static int cs42l52_get_clk(int mclk, int rate) } } } - if (ret > ARRAY_SIZE(clk_map_table)) - return -EINVAL; return ret; } From 3ef303988cfcb35922f550892cf476e861377f0b Mon Sep 17 00:00:00 2001 From: Inderpal Singh Date: Wed, 12 Dec 2012 08:57:00 +0530 Subject: [PATCH 036/553] regulator: s5m8767: Fix probe failure due to stack corruption The function sec_reg_read invokes regmap_read which expects unsigned int * as the destination address. The existing driver is passing address of local variable "val" which is u8. This causes the stack corruption and following dump is observed during probe. Hence change "val" from u8 to unsigned int. Unable to handle kernel paging request at virtual address 02410020 pgd = c0004000 [02410020] *pgd=00000000 Internal error: Oops: 80000005 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 Not tainted (3.6.0-00696-g98a28b18-dirty #27) PC is at 0x2410020 LR is at _regulator_get_voltage+0x3c/0x70 pc : [<02410020>] lr : [] psr: 20000013 sp : cf839b68 ip : 00000000 fp : cf92d410 r10: 0000cfd0 r9 : c06d9878 r8 : 0000f0a0 r7 : cf839b70 r6 : cf92d400 r5 : 00000011 r4 : cf000000 r3 : 02410020 r2 : 00000000 r1 : 00000048 r0 : cf000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel ........................... ................................. [] (_regulator_get_voltage+0x3c/0x70) from [] (print_constraints+0x50/0x36c) [] (print_constraints+0x50/0x36c) from [] (set_machine_constraints+0xe8/0x2b0) [] (set_machine_constraints+0xe8/0x2b0) from [] (regulator_register+0x2fc/0x604) [] (regulator_register+0x2fc/0x604) from [] (s5m8767_pmic_probe+0x688/0x718) [] (s5m8767_pmic_probe+0x688/0x718) from [] (platform_drv_probe+0x18/0x1c) [] (platform_drv_probe+0x18/0x1c) from [] (really_probe+0x68/0x1f4) [] (really_probe+0x68/0x1f4) from [] (driver_probe_device+0x30/0x48) Signed-off-by: Inderpal Singh Signed-off-by: Mark Brown --- drivers/regulator/s5m8767.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index 9f991f2c525a..33b65c9ad5d5 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -214,7 +214,7 @@ static int s5m8767_reg_is_enabled(struct regulator_dev *rdev) struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev); int ret, reg; int mask = 0xc0, enable_ctrl; - u8 val; + unsigned int val; ret = s5m8767_get_register(rdev, ®, &enable_ctrl); if (ret == -EINVAL) @@ -306,7 +306,7 @@ static int s5m8767_get_voltage_sel(struct regulator_dev *rdev) struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev); int reg, mask, ret; int reg_id = rdev_get_id(rdev); - u8 val; + unsigned int val; ret = s5m8767_get_voltage_register(rdev, ®); if (ret) From 19280e40714c9a3c55ab47f76df110072f6cde5e Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 12 Dec 2012 09:22:46 +0800 Subject: [PATCH 037/553] regulator: core: Fix continuous_voltage_range case in regulator_can_change_voltage Regulator drivers with continuous_voltage_range flag set allows not setting n_voltages. Thus if continuous_voltage_range is set, check the constraint range instead. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/core.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 0f65b246cc0c..d7448adc7a2c 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1885,9 +1885,15 @@ int regulator_can_change_voltage(struct regulator *regulator) struct regulator_dev *rdev = regulator->rdev; if (rdev->constraints && - rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE && - (rdev->desc->n_voltages - rdev->desc->linear_min_sel) > 1) - return 1; + (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { + if (rdev->desc->n_voltages - rdev->desc->linear_min_sel > 1) + return 1; + + if (rdev->desc->continuous_voltage_range && + rdev->constraints->min_uV && rdev->constraints->max_uV && + rdev->constraints->min_uV != rdev->constraints->max_uV) + return 1; + } return 0; } From 4a09ab6771276a7fd3f80be4250a0fd0ba5114ad Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 16 Dec 2012 18:27:33 +0100 Subject: [PATCH 038/553] m68k: Provide dma_alloc_attrs()/dma_free_attrs() Since commit 0049fb2603b7afb1080776ee691dfa5a3d282357 ("OMAPFB: use dma_alloc_attrs to allocate memory") we have one non-arch user of dma_{alloc,free}_attrs(). Hence provide these functions, as wrappers around dma_{alloc,free}_coherent(). Note that most architectures do it the other way around. But as so far m68k doesn't support the attributes at all, our solution should generate smaller code. Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/dma-mapping.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/m68k/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping.h index 17f7a45948ea..3e6b8445af6a 100644 --- a/arch/m68k/include/asm/dma-mapping.h +++ b/arch/m68k/include/asm/dma-mapping.h @@ -21,6 +21,22 @@ extern void *dma_alloc_coherent(struct device *, size_t, extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t); +static inline void *dma_alloc_attrs(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs) +{ + /* attrs is not supported and ignored */ + return dma_alloc_coherent(dev, size, dma_handle, flag); +} + +static inline void dma_free_attrs(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle, + struct dma_attrs *attrs) +{ + /* attrs is not supported and ignored */ + dma_free_coherent(dev, size, cpu_addr, dma_handle); +} + static inline void *dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t flag) { From aaf4f97f267aa0dbc42f089b33325e61aac8622e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 16 Dec 2012 18:27:33 +0100 Subject: [PATCH 039/553] asm-generic/dma-mapping-broken.h: Provide dma_alloc_attrs()/dma_free_attrs() Since commit 0049fb2603b7afb1080776ee691dfa5a3d282357 ("OMAPFB: use dma_alloc_attrs to allocate memory") we have one non-arch user of dma_{alloc,free}_attrs(). Hence provide these functions, as wrappers around dma_{alloc,free}_coherent(). Note that most architectures do it the other way around. But as these are dummy functions, we don't care. Signed-off-by: Geert Uytterhoeven Acked-by: Arnd Bergmann --- include/asm-generic/dma-mapping-broken.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/include/asm-generic/dma-mapping-broken.h b/include/asm-generic/dma-mapping-broken.h index ccf7b4f34a3c..6c32af918c2f 100644 --- a/include/asm-generic/dma-mapping-broken.h +++ b/include/asm-generic/dma-mapping-broken.h @@ -16,6 +16,22 @@ extern void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t dma_handle); +static inline void *dma_alloc_attrs(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs) +{ + /* attrs is not supported and ignored */ + return dma_alloc_coherent(dev, size, dma_handle, flag); +} + +static inline void dma_free_attrs(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle, + struct dma_attrs *attrs) +{ + /* attrs is not supported and ignored */ + dma_free_coherent(dev, size, cpu_addr, dma_handle); +} + #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) From e7e29b4cf3c4f2acb2433c45b29d1c7881321d36 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 23 Dec 2012 10:28:00 +0100 Subject: [PATCH 040/553] m68k: Wire up finit_module Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/include/asm/unistd.h | 2 +- arch/m68k/include/uapi/asm/unistd.h | 1 + arch/m68k/kernel/syscalltable.S | 1 + 3 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 847994ce6804..f9337f614660 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -4,7 +4,7 @@ #include -#define NR_syscalls 348 +#define NR_syscalls 349 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_OLD_STAT diff --git a/arch/m68k/include/uapi/asm/unistd.h b/arch/m68k/include/uapi/asm/unistd.h index b94bfbf90705..625f321001dc 100644 --- a/arch/m68k/include/uapi/asm/unistd.h +++ b/arch/m68k/include/uapi/asm/unistd.h @@ -353,5 +353,6 @@ #define __NR_process_vm_readv 345 #define __NR_process_vm_writev 346 #define __NR_kcmp 347 +#define __NR_finit_module 348 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */ diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index c30da5b3f2db..3f04ea0ab802 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -368,4 +368,5 @@ ENTRY(sys_call_table) .long sys_process_vm_readv /* 345 */ .long sys_process_vm_writev .long sys_kcmp + .long sys_finit_module From f80b0c904da93b9ad7db2fd9823dd701932df779 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 21 Dec 2012 12:25:44 +0530 Subject: [PATCH 041/553] Ensure that kernel_init_freeable() is not inlined into non __init code Commit d6b2123802d "make sure that we always have a return path from kernel_execve()" reshuffled kernel_init()/init_post() to ensure that kernel_execve() has a caller to return to. It removed __init annotation for kernel_init() and introduced/calls a new routine kernel_init_freeable(). Latter however is inlined by any reasonable compiler (ARC gcc 4.4 in this case), causing slight code bloat. This patch forces kernel_init_freeable() as noinline reducing the .text bloat-o-meter vmlinux vmlinux_new add/remove: 1/0 grow/shrink: 0/1 up/down: 374/-334 (40) function old new delta kernel_init_freeable - 374 +374 (.init.text) kernel_init 628 294 -334 (.text) Signed-off-by: Al Viro --- init/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/init/main.c b/init/main.c index 85d69dffe864..92d728a32d51 100644 --- a/init/main.c +++ b/init/main.c @@ -802,7 +802,7 @@ static int run_init_process(const char *init_filename) (const char __user *const __user *)envp_init); } -static void __init kernel_init_freeable(void); +static noinline void __init kernel_init_freeable(void); static int __ref kernel_init(void *unused) { @@ -845,7 +845,7 @@ static int __ref kernel_init(void *unused) "See Linux Documentation/init.txt for guidance."); } -static void __init kernel_init_freeable(void) +static noinline void __init kernel_init_freeable(void) { /* * Wait until kthreadd is all set-up. From f13a3664e4d1de8adc1fc82b981ba4699a731fa1 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 24 Dec 2012 10:51:36 +0530 Subject: [PATCH 042/553] CONFIG_GENERIC_SIGALTSTACK build breakage with asm-generic/syscalls.h Saner transition plan for GENERIC_SIGALTSTACK conversion - instead of adding #define sys_sigaltstack sys_sigaltstack in asm/syscalls.h of architecture if it's pulls asm-generic/syscalls.h, only to have those defines removed once all architectures are converted, make the declaration in said asm-generic/syscalls.h conditional on the lack of GENERIC_SIGALTSTACK. Less messy in intermediate stages that way... Signed-off-by: Vineet Gupta Acked-by: Al Viro Cc: james.hogan@imgtec.com Cc: arnd@arndb.de Cc: torvalds@linux-foundation.org Cc: linux-kernel@vger.kernel.org Cc: linux-arch@vger.kernel.org Signed-off-by: Al Viro --- include/asm-generic/syscalls.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-generic/syscalls.h b/include/asm-generic/syscalls.h index 58f466ff00d3..1db51b8524e9 100644 --- a/include/asm-generic/syscalls.h +++ b/include/asm-generic/syscalls.h @@ -21,10 +21,12 @@ asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long fd, off_t pgoff); #endif +#ifndef CONFIG_GENERIC_SIGALTSTACK #ifndef sys_sigaltstack asmlinkage long sys_sigaltstack(const stack_t __user *, stack_t __user *, struct pt_regs *); #endif +#endif #ifndef sys_rt_sigreturn asmlinkage long sys_rt_sigreturn(struct pt_regs *regs); From 90228fc110303549aa1d4d86083bf585df8624c3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 23 Dec 2012 03:33:38 -0500 Subject: [PATCH 043/553] switch compat_sys_sigaltstack() to COMPAT_SYSCALL_DEFINE Makes sigaltstack conversion easier to split into per-architecture parts. Signed-off-by: Al Viro --- kernel/signal.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/signal.c b/kernel/signal.c index 7aaa51d8e5b8..00b4a6d4449d 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -3119,8 +3119,9 @@ int __save_altstack(stack_t __user *uss, unsigned long sp) #ifdef CONFIG_COMPAT #ifdef CONFIG_GENERIC_SIGALTSTACK -asmlinkage long compat_sys_sigaltstack(const compat_stack_t __user *uss_ptr, - compat_stack_t __user *uoss_ptr) +COMPAT_SYSCALL_DEFINE2(sigaltstack, + const compat_stack_t __user *, uss_ptr, + compat_stack_t __user *, uoss_ptr) { stack_t uss, uoss; int ret; From 8d9807b109497ca41d363dc7b6ff2bb6c0d52524 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 23 Dec 2012 14:56:40 -0500 Subject: [PATCH 044/553] switch compat_sys_wait4() and compat_sys_waitid() to COMPAT_SYSCALL_DEFINE Strictly speaking, ppc64 needs it for C ABI compliance. Realistically I would be very surprised if e.g. passing 0xffffffff as 'options' argument to waitid() from 32bit task would cause problems, but yes, it puts us into undefined behaviour territory. ppc64 expects int argument to be passed in 64bit register with bits 31..63 containing the same value. SYSCALL_DEFINE on ppc provides a wrapper that normalizes the value passed from userland; so does COMPAT_SYSCALL_DEFINE. Plain declaration of compat_sys_something() with an int argument obviously doesn't. Again, for wait4 and waitid I would be extremely surprised if gcc started to produce code depending on that value having been properly sign-extended - the argument(s) in question end up passed blindly to sys_wait4 and sys_waitid resp. and normalization for native syscalls takes care of their use there. Still, better to use COMPAT_SYSCALL_DEFINE here than worry about nasal daemons... Signed-off-by: Al Viro --- kernel/compat.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/kernel/compat.c b/kernel/compat.c index f6150e92dfc9..0770ac57c62b 100644 --- a/kernel/compat.c +++ b/kernel/compat.c @@ -535,9 +535,11 @@ asmlinkage long compat_sys_getrusage(int who, struct compat_rusage __user *ru) return 0; } -asmlinkage long -compat_sys_wait4(compat_pid_t pid, compat_uint_t __user *stat_addr, int options, - struct compat_rusage __user *ru) +COMPAT_SYSCALL_DEFINE4(wait4, + compat_pid_t, pid, + compat_uint_t __user *, stat_addr, + int, options, + struct compat_rusage __user *, ru) { if (!ru) { return sys_wait4(pid, stat_addr, options, NULL); @@ -564,9 +566,10 @@ compat_sys_wait4(compat_pid_t pid, compat_uint_t __user *stat_addr, int options, } } -asmlinkage long compat_sys_waitid(int which, compat_pid_t pid, - struct compat_siginfo __user *uinfo, int options, - struct compat_rusage __user *uru) +COMPAT_SYSCALL_DEFINE5(waitid, + int, which, compat_pid_t, pid, + struct compat_siginfo __user *, uinfo, int, options, + struct compat_rusage __user *, uru) { siginfo_t info; struct rusage ru; From a566c288826ad4502e43b59570214f18173d7744 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 23 Dec 2012 23:14:49 -0500 Subject: [PATCH 045/553] x32: fix waitid() It needs 64bit rusage and 32bit siginfo. glibc never calls it with non-NULL rusage pointer, or we would've seen breakage already... Signed-off-by: Al Viro --- kernel/compat.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/kernel/compat.c b/kernel/compat.c index 0770ac57c62b..e5cc33c7122c 100644 --- a/kernel/compat.c +++ b/kernel/compat.c @@ -587,7 +587,11 @@ COMPAT_SYSCALL_DEFINE5(waitid, return ret; if (uru) { - ret = put_compat_rusage(&ru, uru); + /* sys_waitid() overwrites everything in ru */ + if (COMPAT_USE_64BIT_TIME) + ret = copy_to_user(uru, &ru, sizeof(ru)); + else + ret = put_compat_rusage(&ru, uru); if (ret) return ret; } From b2ddedcd21f44a5873ee3d6ff6118a2318e01e18 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 24 Dec 2012 12:31:00 -0500 Subject: [PATCH 046/553] x32: fix sigtimedwait It needs 64bit timespec. As it is, we end up truncating the timeout to whole seconds; usually it doesn't matter, but for having all sub-second timeouts truncated to one jiffy is visibly wrong. Signed-off-by: Al Viro --- kernel/compat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/compat.c b/kernel/compat.c index e5cc33c7122c..36700e9e2be9 100644 --- a/kernel/compat.c +++ b/kernel/compat.c @@ -1001,7 +1001,7 @@ compat_sys_rt_sigtimedwait (compat_sigset_t __user *uthese, sigset_from_compat(&s, &s32); if (uts) { - if (get_compat_timespec(&t, uts)) + if (compat_get_timespec(&t, uts)) return -EFAULT; } From 1690970d0d28051e2652d9bae2f73288e017e142 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 6 Dec 2012 16:09:00 +0000 Subject: [PATCH 047/553] iio:adf4350: Fix typo There is a typo in the adf4350 driver turning a shift into a compare. This patch fixes it. Signed-off-by: Michael Hennerich Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/frequency/adf4350.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c index e35bb8f6fe75..c7de8b5a01ff 100644 --- a/drivers/iio/frequency/adf4350.c +++ b/drivers/iio/frequency/adf4350.c @@ -173,7 +173,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq) } while ((st->r1_mod > ADF4350_MAX_MODULUS) && r_cnt); } while (r_cnt == 0); - tmp = freq * (u64)st->r1_mod + (st->fpfd > 1); + tmp = freq * (u64)st->r1_mod + (st->fpfd >> 1); do_div(tmp, st->fpfd); /* Div round closest (n + d/2)/d */ st->r0_fract = do_div(tmp, st->r1_mod); st->r0_int = tmp; From 31ad70ea585f744ba8d1310807dcf99043d4f3c4 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 6 Dec 2012 13:48:00 +0000 Subject: [PATCH 048/553] staging:iio:adis16260: Select adislib Commit 9d5e9fdf ("staging:iio:adis16260: Use adis library") switched over the adis16260 driver to use the common adis library but neglected to update the Kconfig entry to reflect the change. This leads to the following compile error if no other driver selects the adis library: drivers/built-in.o: In function `adis16260_write_frequency': adis16260_core.c:(.text+0x5a83bf): undefined reference to `adis_write_reg_8' drivers/built-in.o: In function `adis16260_read_frequency': adis16260_core.c:(.text+0x5a8433): undefined reference to `adis_read_reg_16' drivers/built-in.o: In function `adis16260_write_raw': adis16260_core.c:(.text+0x5a8538): undefined reference to `adis_write_reg_16' adis16260_core.c:(.text+0x5a856b): undefined reference to `adis_write_reg_16' drivers/built-in.o: In function `adis16260_read_raw': adis16260_core.c:(.text+0x5a85d3): undefined reference to `adis_single_conversion' adis16260_core.c:(.text+0x5a873e): undefined reference to `adis_read_reg_16' adis16260_core.c:(.text+0x5a87fb): undefined reference to `adis_read_reg_16' drivers/built-in.o: In function `adis16260_probe': adis16260_core.c:(.devinit.text+0x5c6b8): undefined reference to `adis_init' adis16260_core.c:(.devinit.text+0x5c799): undefined reference to `adis_initial_startup' drivers/built-in.o: In function `adis16260_remove': adis16260_core.c:(.devexit.text+0x9943): undefined reference to `adis_write_reg_16' This patch updates the adis16260 Kconfig entry to select the adis library. Reported-by: Fengguang Wu Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/gyro/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/iio/gyro/Kconfig b/drivers/staging/iio/gyro/Kconfig index ea295b25308c..87979a0d03a9 100644 --- a/drivers/staging/iio/gyro/Kconfig +++ b/drivers/staging/iio/gyro/Kconfig @@ -27,8 +27,8 @@ config ADIS16130 config ADIS16260 tristate "Analog Devices ADIS16260 Digital Gyroscope Sensor SPI driver" depends on SPI - select IIO_TRIGGER if IIO_BUFFER - select IIO_SW_RING if IIO_BUFFER + select IIO_ADIS_LIB + select IIO_ADIS_LIB_BUFFER if IIO_BUFFER help Say yes here to build support for Analog Devices ADIS16260 ADIS16265 ADIS16250 ADIS16255 and ADIS16251 programmable digital gyroscope sensors. From 116797672ffdd3635eafa25db5bd312e65c5ad01 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 12 Dec 2012 15:17:00 +0000 Subject: [PATCH 049/553] iio: at91: fix dev var name in at91_adc_trigger_handler /opt/work/linux-2.6/drivers/iio/adc/at91_adc.c: In function 'at91_adc_trigger_handler': /opt/work/linux-2.6/drivers/iio/adc/at91_adc.c:83:22: error: 'indio_dev' undeclared (first use in this function) /opt/work/linux-2.6/drivers/iio/adc/at91_adc.c:83:22: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: linux-iio@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/adc/at91_adc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 03b85940f4ba..315bed1f401f 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -80,7 +80,7 @@ static irqreturn_t at91_adc_trigger_handler(int irq, void *p) *timestamp = pf->timestamp; } - iio_push_to_buffers(indio_dev, (u8 *)st->buffer); + iio_push_to_buffers(idev, (u8 *)st->buffer); iio_trigger_notify_done(idev->trig); From 9541cc39a6381b76dac30c8e05078eb0a543f113 Mon Sep 17 00:00:00 2001 From: Alexander Holler Date: Tue, 11 Dec 2012 18:21:00 +0000 Subject: [PATCH 050/553] iio: hid-sensors: respect CONFIG_IIO_TRIGGER Not much to say, without that change, hid-sensor-trigger will be always compiled if HID_SENSOR_IIO_COMMON is selected which fails if CONFIG_IIO_TRIGGER is not set because CONFIG_IIO_CONSUMERS_PER_TRIGGER will not be defined. Signed-off-by: Alexander Holler Signed-off-by: Jonathan Cameron --- drivers/iio/accel/Kconfig | 1 + drivers/iio/common/hid-sensors/Kconfig | 13 ++++++++++++- drivers/iio/common/hid-sensors/Makefile | 3 ++- drivers/iio/gyro/Kconfig | 1 + drivers/iio/light/Kconfig | 1 + drivers/iio/magnetometer/Kconfig | 1 + 6 files changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index fe4bcd7c5b12..05e996fafc9d 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -8,6 +8,7 @@ config HID_SENSOR_ACCEL_3D select IIO_BUFFER select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER tristate "HID Accelerometers 3D" help Say yes here to build support for the HID SENSOR diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig index ae10778da7aa..1178121b55b0 100644 --- a/drivers/iio/common/hid-sensors/Kconfig +++ b/drivers/iio/common/hid-sensors/Kconfig @@ -6,7 +6,7 @@ menu "Hid Sensor IIO Common" config HID_SENSOR_IIO_COMMON tristate "Common modules for all HID Sensor IIO drivers" depends on HID_SENSOR_HUB - select IIO_TRIGGER if IIO_BUFFER + select HID_SENSOR_IIO_TRIGGER if IIO_BUFFER help Say yes here to build support for HID sensor to use HID sensor common processing for attributes and IIO triggers. @@ -14,6 +14,17 @@ config HID_SENSOR_IIO_COMMON HID sensor drivers, this module contains processing for those attributes. +config HID_SENSOR_IIO_TRIGGER + tristate "Common module (trigger) for all HID Sensor IIO drivers" + depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON + select IIO_TRIGGER + help + Say yes here to build trigger support for HID sensors. + Triggers will be send if all requested attributes were read. + + If this driver is compiled as a module, it will be named + hid-sensor-trigger. + config HID_SENSOR_ENUM_BASE_QUIRKS bool "ENUM base quirks for HID Sensor IIO drivers" depends on HID_SENSOR_IIO_COMMON diff --git a/drivers/iio/common/hid-sensors/Makefile b/drivers/iio/common/hid-sensors/Makefile index 1f463e00c242..22e7c5a82325 100644 --- a/drivers/iio/common/hid-sensors/Makefile +++ b/drivers/iio/common/hid-sensors/Makefile @@ -3,4 +3,5 @@ # obj-$(CONFIG_HID_SENSOR_IIO_COMMON) += hid-sensor-iio-common.o -hid-sensor-iio-common-y := hid-sensor-attributes.o hid-sensor-trigger.o +obj-$(CONFIG_HID_SENSOR_IIO_TRIGGER) += hid-sensor-trigger.o +hid-sensor-iio-common-y := hid-sensor-attributes.o diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig index 48ed1483ff27..96b68f63a902 100644 --- a/drivers/iio/gyro/Kconfig +++ b/drivers/iio/gyro/Kconfig @@ -17,6 +17,7 @@ config HID_SENSOR_GYRO_3D select IIO_BUFFER select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER tristate "HID Gyroscope 3D" help Say yes here to build support for the HID SENSOR diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 1763c9bcb98a..dbf80abc834f 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -47,6 +47,7 @@ config HID_SENSOR_ALS select IIO_BUFFER select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER tristate "HID ALS" help Say yes here to build support for the HID SENSOR diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index c1f0cdd57037..ff11d68225cf 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -8,6 +8,7 @@ config HID_SENSOR_MAGNETOMETER_3D select IIO_BUFFER select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER tristate "HID Magenetometer 3D" help Say yes here to build support for the HID SENSOR From 36ce0c1c3ab7ea54fa6c2b3a0803c7ab0adcefbf Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 14 Dec 2012 07:47:00 +0000 Subject: [PATCH 051/553] iio: adc: ad7266: Don't set error code to st->vref_uv regulator_get_voltage() may return negative error code. Add error checking to avoid setting error code to st->vref_uv. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7266.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c index a6f4fc5f8201..e36107dc30b9 100644 --- a/drivers/iio/adc/ad7266.c +++ b/drivers/iio/adc/ad7266.c @@ -411,7 +411,11 @@ static int __devinit ad7266_probe(struct spi_device *spi) if (ret) goto error_put_reg; - st->vref_uv = regulator_get_voltage(st->reg); + ret = regulator_get_voltage(st->reg); + if (ret < 0) + goto error_disable_reg; + + st->vref_uv = ret; } else { /* Use internal reference */ st->vref_uv = 2500000; From 272cc9c8b5d0dffe9fb03e6c0ab3da2fde9c20e9 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 14 Dec 2012 07:48:00 +0000 Subject: [PATCH 052/553] iio: dac: ad5380: Don't set error code to st->vref regulator_get_voltage() may return negative error code. Add error checking to avoid setting error code to st->vref_uv. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5380.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5380.c b/drivers/iio/dac/ad5380.c index 14991ac55f26..4aca1895ce52 100644 --- a/drivers/iio/dac/ad5380.c +++ b/drivers/iio/dac/ad5380.c @@ -406,7 +406,11 @@ static int __devinit ad5380_probe(struct device *dev, struct regmap *regmap, goto error_free_reg; } - st->vref = regulator_get_voltage(st->vref_reg); + ret = regulator_get_voltage(st->vref_reg); + if (ret < 0) + goto error_disable_reg; + + st->vref = ret; } else { st->vref = st->chip_info->int_vref; ctrl |= AD5380_CTRL_INT_VREF_EN; From 7e2dcc69824288916b55f90cd6db4992a0d95374 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 14 Dec 2012 07:55:00 +0000 Subject: [PATCH 053/553] iio: dac: ad5791: Don't set error code to [pos|neg]_voltage_uv regulator_get_voltage() may return negative error code. Don't set error code to to pos_voltage_uv and neg_voltage_uv. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5791.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/iio/dac/ad5791.c b/drivers/iio/dac/ad5791.c index 2bd2e37280ff..6efe83e32ac6 100644 --- a/drivers/iio/dac/ad5791.c +++ b/drivers/iio/dac/ad5791.c @@ -365,7 +365,11 @@ static int __devinit ad5791_probe(struct spi_device *spi) if (ret) goto error_put_reg_pos; - pos_voltage_uv = regulator_get_voltage(st->reg_vdd); + ret = regulator_get_voltage(st->reg_vdd); + if (ret < 0) + goto error_disable_reg_pos; + + pos_voltage_uv = ret; } st->reg_vss = regulator_get(&spi->dev, "vss"); @@ -374,7 +378,11 @@ static int __devinit ad5791_probe(struct spi_device *spi) if (ret) goto error_put_reg_neg; - neg_voltage_uv = regulator_get_voltage(st->reg_vss); + ret = regulator_get_voltage(st->reg_vss); + if (ret < 0) + goto error_disable_reg_neg; + + neg_voltage_uv = ret; } st->pwr_down = true; @@ -428,6 +436,7 @@ error_put_reg_neg: if (!IS_ERR(st->reg_vss)) regulator_put(st->reg_vss); +error_disable_reg_pos: if (!IS_ERR(st->reg_vdd)) regulator_disable(st->reg_vdd); error_put_reg_pos: From 0ce2fdaa97c6a8d84e9fce3d920a45a493145623 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 14 Dec 2012 12:06:00 +0000 Subject: [PATCH 054/553] iio: dac: ad5504: Don't set error code to voltage_uv regulator_get_voltage() may return negative error code. Add error checking to avoid setting error code to voltage_uv. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5504.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5504.c b/drivers/iio/dac/ad5504.c index 242bdc7d0044..7f7c026b9d8a 100644 --- a/drivers/iio/dac/ad5504.c +++ b/drivers/iio/dac/ad5504.c @@ -296,7 +296,11 @@ static int __devinit ad5504_probe(struct spi_device *spi) if (ret) goto error_put_reg; - voltage_uv = regulator_get_voltage(reg); + ret = regulator_get_voltage(reg); + if (ret < 0) + goto error_disable_reg; + + voltage_uv = ret; } spi_set_drvdata(spi, indio_dev); From 8434e7856551015650f62afa48e8f9e9b4bf80f2 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 14 Dec 2012 12:07:00 +0000 Subject: [PATCH 055/553] iio: dac: ad5624r_spi: Don't set error code to voltage_uv regulator_get_voltage() may return negative error code. Add error checking to avoid setting error code to voltage_uv. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5624r_spi.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5624r_spi.c b/drivers/iio/dac/ad5624r_spi.c index 6a7d6a48cc6d..14ea3dbf4902 100644 --- a/drivers/iio/dac/ad5624r_spi.c +++ b/drivers/iio/dac/ad5624r_spi.c @@ -238,7 +238,11 @@ static int __devinit ad5624r_probe(struct spi_device *spi) if (ret) goto error_put_reg; - voltage_uv = regulator_get_voltage(st->reg); + ret = regulator_get_voltage(st->reg); + if (ret < 0) + goto error_disable_reg; + + voltage_uv = ret; } spi_set_drvdata(spi, indio_dev); From 359570ad3fcfcc3a3031b3a5e01bfb616233eca0 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 14 Dec 2012 12:08:00 +0000 Subject: [PATCH 056/553] iio: dac: ad5686: Don't set error code to voltage_uv regulator_get_voltage() may return negative error code. Add error checking to avoid setting error code to voltage_uv. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5686.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c index bc92ff9309c2..01eb1d0e4e41 100644 --- a/drivers/iio/dac/ad5686.c +++ b/drivers/iio/dac/ad5686.c @@ -332,7 +332,11 @@ static int __devinit ad5686_probe(struct spi_device *spi) if (ret) goto error_put_reg; - voltage_uv = regulator_get_voltage(st->reg); + ret = regulator_get_voltage(st->reg); + if (ret < 0) + goto error_disable_reg; + + voltage_uv = ret; } st->chip_info = From 13e57ee2056221296f1926d49d00edd224058bea Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 18 Dec 2012 03:33:00 +0000 Subject: [PATCH 057/553] iio: dac: ad5446: Don't set error code to voltage_uv regulator_get_voltage() may return negative error code. Add error checking to avoid setting error code to voltage_uv. Signed-off-by: Axel Lin Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5446.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c index 3310cbbd41e7..ecb639540dff 100644 --- a/drivers/iio/dac/ad5446.c +++ b/drivers/iio/dac/ad5446.c @@ -226,7 +226,11 @@ static int __devinit ad5446_probe(struct device *dev, const char *name, if (ret) goto error_put_reg; - voltage_uv = regulator_get_voltage(reg); + ret = regulator_get_voltage(reg); + if (ret < 0) + goto error_disable_reg; + + voltage_uv = ret; } indio_dev = iio_device_alloc(sizeof(*st)); From 678fb42e2b2c815c3475884017aac4da22124d0d Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 24 Dec 2012 06:24:00 +0000 Subject: [PATCH 058/553] iio: (max1363) Fix probe error path Instantiating the driver with no available regulator results in: [39711.686393] i2c i2c-7: new_device: Instantiated device max1139 at 0x35 [39711.688687] BUG: unable to handle kernel paging request at fffffffffffffe13 [39711.688734] IP: [] regulator_disable+0x1b/0x80 [39711.688788] PGD 1c0e067 PUD 1c0f067 PMD 0 [39711.688835] Oops: 0000 [#1] SMP Caused by bad probe error path. Fix it. Driver should also not attempt to free the interrupt in its error path if none was allocated. Fix that problem as well. Finally, testing if the regulator was allocated is not necessary in the remove function, since the probe function bails out if this is the case. Remove that check. Signed-off-by: Guenter Roeck Signed-off-by: Jonathan Cameron --- drivers/iio/adc/max1363.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index 1e84b5b55093..31f3485303d0 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -1605,19 +1605,20 @@ static int __devinit max1363_probe(struct i2c_client *client, return 0; error_free_irq: - free_irq(st->client->irq, indio_dev); + if (client->irq) + free_irq(st->client->irq, indio_dev); error_uninit_buffer: iio_buffer_unregister(indio_dev); error_cleanup_buffer: max1363_buffer_cleanup(indio_dev); error_free_available_scan_masks: kfree(indio_dev->available_scan_masks); -error_unregister_map: - iio_map_array_unregister(indio_dev, client->dev.platform_data); error_disable_reg: regulator_disable(st->reg); error_put_reg: regulator_put(st->reg); +error_unregister_map: + iio_map_array_unregister(indio_dev, client->dev.platform_data); error_free_device: iio_device_free(indio_dev); error_out: @@ -1635,10 +1636,8 @@ static int __devexit max1363_remove(struct i2c_client *client) iio_buffer_unregister(indio_dev); max1363_buffer_cleanup(indio_dev); kfree(indio_dev->available_scan_masks); - if (!IS_ERR(st->reg)) { - regulator_disable(st->reg); - regulator_put(st->reg); - } + regulator_disable(st->reg); + regulator_put(st->reg); iio_map_array_unregister(indio_dev, client->dev.platform_data); iio_device_free(indio_dev); From 865df9cb122d9e5ecbbb7056f2c9c64933bf8dd0 Mon Sep 17 00:00:00 2001 From: Chuansheng Liu Date: Wed, 26 Dec 2012 00:56:05 +0800 Subject: [PATCH 059/553] ASoC: core: fix the memory leak in case of device_add() failure After called device_initialize(), even device_add() returns error, we still need use the put_device() to release the reference to call rtd_release(), which will do the free() action. Signed-off-by: liu chuansheng Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 29046e750ad7..f7551c1c827c 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1255,6 +1255,8 @@ static int soc_post_component_init(struct snd_soc_card *card, INIT_LIST_HEAD(&rtd->dpcm[SNDRV_PCM_STREAM_CAPTURE].fe_clients); ret = device_add(rtd->dev); if (ret < 0) { + /* calling put_device() here to free the rtd->dev */ + put_device(rtd->dev); dev_err(card->dev, "ASoC: failed to register runtime device: %d\n", ret); return ret; From d3bf1561253383a3dbcc40afdb2b039d56093a3e Mon Sep 17 00:00:00 2001 From: Chuansheng Liu Date: Wed, 26 Dec 2012 00:57:32 +0800 Subject: [PATCH 060/553] ASoC: core: fix the memory leak in case of remove_aux_dev() When probing aux_dev, initializing is as below: device_initialize() device_add() So when remove aux_dev, we need do as below: device_del() device_put() Otherwise, the rtd_release() will not be called. So here using device_unregister() to replace device_del(), like the action in soc_remove_link_dais(). Signed-off-by: liu chuansheng Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index f7551c1c827c..2370063b5824 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1556,7 +1556,7 @@ static void soc_remove_aux_dev(struct snd_soc_card *card, int num) /* unregister the rtd device */ if (rtd->dev_registered) { device_remove_file(rtd->dev, &dev_attr_codec_reg); - device_del(rtd->dev); + device_unregister(rtd->dev); rtd->dev_registered = 0; } From 4e4d78f1c1a08f085a1972b9af92960af70a07c6 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 28 Dec 2012 22:38:51 -0800 Subject: [PATCH 061/553] sparc: Hook up finit_module syscall. Signed-off-by: David S. Miller --- arch/sparc/include/uapi/asm/unistd.h | 3 ++- arch/sparc/kernel/systbls_32.S | 2 +- arch/sparc/kernel/systbls_64.S | 4 ++-- 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/sparc/include/uapi/asm/unistd.h b/arch/sparc/include/uapi/asm/unistd.h index cac719d1bc5c..62ced589bcf7 100644 --- a/arch/sparc/include/uapi/asm/unistd.h +++ b/arch/sparc/include/uapi/asm/unistd.h @@ -407,8 +407,9 @@ #define __NR_process_vm_writev 339 #define __NR_kern_features 340 #define __NR_kcmp 341 +#define __NR_finit_module 342 -#define NR_syscalls 342 +#define NR_syscalls 343 /* Bitmask values returned from kern_features system call. */ #define KERN_FEATURE_MIXED_MODE_STACK 0x00000001 diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index 5147f574f125..6ac43c36bbbf 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -85,4 +85,4 @@ sys_call_table: /*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime /*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev -/*340*/ .long sys_ni_syscall, sys_kcmp +/*340*/ .long sys_ni_syscall, sys_kcmp, sys_finit_module diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index cdbd9b817751..1009ecb92678 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -86,7 +86,7 @@ sys_call_table32: .word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init /*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime .word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev -/*340*/ .word sys_kern_features, sys_kcmp +/*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module #endif /* CONFIG_COMPAT */ @@ -164,4 +164,4 @@ sys_call_table: .word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime .word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev -/*340*/ .word sys_kern_features, sys_kcmp +/*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module From d9699088e4bfaff1778d26192756a5894c3f947b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 31 Dec 2012 08:26:33 -0300 Subject: [PATCH 062/553] [media] [FOR,v3.8] omap3isp: Don't include deleted OMAP plat/ header files The plat/iommu.h, plat/iovmm.h and plat/omap-pm.h have been deleted. Don't include them. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/omap3isp/ispvideo.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c index 8759247cb243..b4e81cecae6f 100644 --- a/drivers/media/platform/omap3isp/ispvideo.c +++ b/drivers/media/platform/omap3isp/ispvideo.c @@ -34,9 +34,6 @@ #include #include #include -#include -#include -#include #include "ispvideo.h" #include "isp.h" From f4953fe6c4aeada2d5cafd78aa97587a46d2d8f9 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Wed, 2 Jan 2013 15:37:17 +1030 Subject: [PATCH 063/553] virtio-blk: Don't free ida when disk is in use When a file system is mounted on a virtio-blk disk, we then remove it and then reattach it, the reattached disk gets the same disk name and ids as the hot removed one. This leads to very nasty effects - mostly rendering the newly attached device completely unusable. Trying what happens when I do the same thing with a USB device, I saw that the sd node simply doesn't get free'd when a device gets forcefully removed. Imitate the same behavior for vd devices. This way broken vd devices simply are never free'd and newly attached ones keep working just fine. Signed-off-by: Alexander Graf Signed-off-by: Rusty Russell Cc: stable@kernel.org --- drivers/block/virtio_blk.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 0bdde8fba397..07a18e238483 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -889,6 +889,7 @@ static void __devexit virtblk_remove(struct virtio_device *vdev) { struct virtio_blk *vblk = vdev->priv; int index = vblk->index; + int refc; /* Prevent config work handler from accessing the device. */ mutex_lock(&vblk->config_lock); @@ -903,11 +904,15 @@ static void __devexit virtblk_remove(struct virtio_device *vdev) flush_work(&vblk->config_work); + refc = atomic_read(&disk_to_dev(vblk->disk)->kobj.kref.refcount); put_disk(vblk->disk); mempool_destroy(vblk->pool); vdev->config->del_vqs(vdev); kfree(vblk); - ida_simple_remove(&vd_index_ida, index); + + /* Only free device id if we don't have any users */ + if (refc == 1) + ida_simple_remove(&vd_index_ida, index); } #ifdef CONFIG_PM From 1b8d52e63c53fd271846a56b7b1e3f622fd6a0a8 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 4 Dec 2012 13:14:24 +0900 Subject: [PATCH 064/553] ASoC: wm5102: Improve speaker enable performance Signed-off-by: Mark Brown --- sound/soc/codecs/wm5102.c | 48 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 46 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index 688ade080589..7a9048dad1cd 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -36,6 +36,9 @@ struct wm5102_priv { struct arizona_priv core; struct arizona_fll fll[2]; + + unsigned int spk_ena:2; + unsigned int spk_ena_pending:1; }; static DECLARE_TLV_DB_SCALE(ana_tlv, 0, 100, 0); @@ -787,6 +790,47 @@ ARIZONA_MIXER_CONTROLS("AIF3TX1", ARIZONA_AIF3TX1MIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("AIF3TX2", ARIZONA_AIF3TX2MIX_INPUT_1_SOURCE), }; +static int wm5102_spk_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, + int event) +{ + struct snd_soc_codec *codec = w->codec; + struct arizona *arizona = dev_get_drvdata(codec->dev->parent); + struct wm5102_priv *wm5102 = snd_soc_codec_get_drvdata(codec); + + if (arizona->rev < 1) + return 0; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + if (!wm5102->spk_ena) { + snd_soc_write(codec, 0x4f5, 0x25a); + wm5102->spk_ena_pending = true; + } + break; + case SND_SOC_DAPM_POST_PMU: + if (wm5102->spk_ena_pending) { + msleep(75); + snd_soc_write(codec, 0x4f5, 0xda); + wm5102->spk_ena_pending = false; + wm5102->spk_ena++; + } + break; + case SND_SOC_DAPM_PRE_PMD: + wm5102->spk_ena--; + if (!wm5102->spk_ena) + snd_soc_write(codec, 0x4f5, 0x25a); + break; + case SND_SOC_DAPM_POST_PMD: + if (!wm5102->spk_ena) + snd_soc_write(codec, 0x4f5, 0x0da); + break; + } + + return 0; +} + + ARIZONA_MIXER_ENUMS(EQ1, ARIZONA_EQ1MIX_INPUT_1_SOURCE); ARIZONA_MIXER_ENUMS(EQ2, ARIZONA_EQ2MIX_INPUT_1_SOURCE); ARIZONA_MIXER_ENUMS(EQ3, ARIZONA_EQ3MIX_INPUT_1_SOURCE); @@ -1034,10 +1078,10 @@ SND_SOC_DAPM_PGA_E("OUT3L", ARIZONA_OUTPUT_ENABLES_1, ARIZONA_OUT3L_ENA_SHIFT, 0, NULL, 0, arizona_out_ev, SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), SND_SOC_DAPM_PGA_E("OUT4L", ARIZONA_OUTPUT_ENABLES_1, - ARIZONA_OUT4L_ENA_SHIFT, 0, NULL, 0, arizona_out_ev, + ARIZONA_OUT4L_ENA_SHIFT, 0, NULL, 0, wm5102_spk_ev, SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), SND_SOC_DAPM_PGA_E("OUT4R", ARIZONA_OUTPUT_ENABLES_1, - ARIZONA_OUT4R_ENA_SHIFT, 0, NULL, 0, arizona_out_ev, + ARIZONA_OUT4R_ENA_SHIFT, 0, NULL, 0, wm5102_spk_ev, SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), SND_SOC_DAPM_PGA_E("OUT5L", ARIZONA_OUTPUT_ENABLES_1, ARIZONA_OUT5L_ENA_SHIFT, 0, NULL, 0, arizona_out_ev, From 52441fa8f2f1ccc9fa97607c6ccf8b46b9fd15ae Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Thu, 3 Jan 2013 11:09:53 +1030 Subject: [PATCH 065/553] module: prevent warning when finit_module a 0 sized file If we try to finit_module on a file sized 0 bytes vmalloc will scream and spit out a warning. Since modules have to be bigger than 0 bytes anyways we can just check that beforehand and avoid the warning. Signed-off-by: Sasha Levin Signed-off-by: Rusty Russell --- kernel/module.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/kernel/module.c b/kernel/module.c index 250092c1d57d..41bc1189b061 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2527,6 +2527,13 @@ static int copy_module_from_fd(int fd, struct load_info *info) err = -EFBIG; goto out; } + + /* Don't hand 0 to vmalloc, it whines. */ + if (stat.size == 0) { + err = -EINVAL; + goto out; + } + info->hdr = vmalloc(stat.size); if (!info->hdr) { err = -ENOMEM; From 34bcf71502413f8903ade93746f2d0f04b937a78 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 11 Dec 2012 10:48:23 +0100 Subject: [PATCH 066/553] mac80211: fix ibss scanning Do not scan on no-IBSS and disabled channels in IBSS mode. Doing this can trigger Microcode errors on iwlwifi and iwlegacy drivers. Also rename ieee80211_request_internal_scan() function since it is only used in IBSS mode and simplify calling it from ieee80211_sta_find_ibss(). This patch should address: https://bugzilla.redhat.com/show_bug.cgi?id=883414 https://bugzilla.kernel.org/show_bug.cgi?id=49411 Reported-by: Jesse Kahtava Reported-by: Mikko Rapeli Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: Johannes Berg --- net/mac80211/ibss.c | 9 ++++----- net/mac80211/ieee80211_i.h | 6 +++--- net/mac80211/scan.c | 34 ++++++++++++++++++++++++---------- 3 files changed, 31 insertions(+), 18 deletions(-) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 8881fc77fb13..6b7644e818d8 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -703,8 +703,8 @@ static void ieee80211_sta_merge_ibss(struct ieee80211_sub_if_data *sdata) sdata_info(sdata, "No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)\n"); - ieee80211_request_internal_scan(sdata, - ifibss->ssid, ifibss->ssid_len, NULL); + ieee80211_request_ibss_scan(sdata, ifibss->ssid, ifibss->ssid_len, + NULL); } static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) @@ -802,9 +802,8 @@ static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata) IEEE80211_SCAN_INTERVAL)) { sdata_info(sdata, "Trigger new scan to find an IBSS to join\n"); - ieee80211_request_internal_scan(sdata, - ifibss->ssid, ifibss->ssid_len, - ifibss->fixed_channel ? ifibss->channel : NULL); + ieee80211_request_ibss_scan(sdata, ifibss->ssid, + ifibss->ssid_len, chan); } else { int interval = IEEE80211_SCAN_INTERVAL; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 42d0d0267730..112bb6192399 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1329,9 +1329,9 @@ void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, /* scan/BSS handling */ void ieee80211_scan_work(struct work_struct *work); -int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata, - const u8 *ssid, u8 ssid_len, - struct ieee80211_channel *chan); +int ieee80211_request_ibss_scan(struct ieee80211_sub_if_data *sdata, + const u8 *ssid, u8 ssid_len, + struct ieee80211_channel *chan); int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata, struct cfg80211_scan_request *req); void ieee80211_scan_cancel(struct ieee80211_local *local); diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 8ed83dcc149f..de3532d18df1 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -832,9 +832,9 @@ int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata, return res; } -int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata, - const u8 *ssid, u8 ssid_len, - struct ieee80211_channel *chan) +int ieee80211_request_ibss_scan(struct ieee80211_sub_if_data *sdata, + const u8 *ssid, u8 ssid_len, + struct ieee80211_channel *chan) { struct ieee80211_local *local = sdata->local; int ret = -EBUSY; @@ -848,22 +848,36 @@ int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata, /* fill internal scan request */ if (!chan) { - int i, nchan = 0; + int i, max_n; + int n_ch = 0; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { if (!local->hw.wiphy->bands[band]) continue; - for (i = 0; - i < local->hw.wiphy->bands[band]->n_channels; - i++) { - local->int_scan_req->channels[nchan] = + + max_n = local->hw.wiphy->bands[band]->n_channels; + for (i = 0; i < max_n; i++) { + struct ieee80211_channel *tmp_ch = &local->hw.wiphy->bands[band]->channels[i]; - nchan++; + + if (tmp_ch->flags & (IEEE80211_CHAN_NO_IBSS | + IEEE80211_CHAN_DISABLED)) + continue; + + local->int_scan_req->channels[n_ch] = tmp_ch; + n_ch++; } } - local->int_scan_req->n_channels = nchan; + if (WARN_ON_ONCE(n_ch == 0)) + goto unlock; + + local->int_scan_req->n_channels = n_ch; } else { + if (WARN_ON_ONCE(chan->flags & (IEEE80211_CHAN_NO_IBSS | + IEEE80211_CHAN_DISABLED))) + goto unlock; + local->int_scan_req->channels[0] = chan; local->int_scan_req->n_channels = 1; } From 2d4072a5470621c552f46d51cd54965aeb033893 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 10 Dec 2012 20:02:34 +0100 Subject: [PATCH 067/553] mac80211: flush AP_VLAN stations when tearing down the BSS AP Signed-off-by: Felix Fietkau [change to flush stations with AP flush in second loop] Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 5c61677487cf..47e0aca614b7 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1009,6 +1009,8 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) if (old_probe_resp) kfree_rcu(old_probe_resp, rcu_head); + list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) + sta_info_flush(local, vlan); sta_info_flush(local, sdata); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); From 4d76d21bd700fcf72a030ad75c71c816707039b8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 11 Dec 2012 20:38:41 +0100 Subject: [PATCH 068/553] mac80211: assign VLAN channel contexts Make AP_VLAN type interfaces track the AP master channel context so they have one assigned for the various lookups. Don't give them their own refcount etc. since they're just slaves to the AP master. Signed-off-by: Johannes Berg --- net/mac80211/chan.c | 38 ++++++++++++++++++++++++++++++++++++++ net/mac80211/ieee80211_i.h | 1 + net/mac80211/iface.c | 9 ++++++--- 3 files changed, 45 insertions(+), 3 deletions(-) diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 53f03120db55..80e55527504b 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -4,6 +4,7 @@ #include #include +#include #include #include "ieee80211_i.h" #include "driver-ops.h" @@ -197,6 +198,15 @@ static void __ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata) ctx = container_of(conf, struct ieee80211_chanctx, conf); + if (sdata->vif.type == NL80211_IFTYPE_AP) { + struct ieee80211_sub_if_data *vlan; + + /* for the VLAN list */ + ASSERT_RTNL(); + list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) + rcu_assign_pointer(vlan->vif.chanctx_conf, NULL); + } + ieee80211_unassign_vif_chanctx(sdata, ctx); if (ctx->refcount == 0) ieee80211_free_chanctx(local, ctx); @@ -316,6 +326,15 @@ int ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, goto out; } + if (sdata->vif.type == NL80211_IFTYPE_AP) { + struct ieee80211_sub_if_data *vlan; + + /* for the VLAN list */ + ASSERT_RTNL(); + list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) + rcu_assign_pointer(vlan->vif.chanctx_conf, &ctx->conf); + } + ieee80211_recalc_smps_chanctx(local, ctx); out: mutex_unlock(&local->chanctx_mtx); @@ -331,6 +350,25 @@ void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata) mutex_unlock(&sdata->local->chanctx_mtx); } +void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_sub_if_data *ap; + struct ieee80211_chanctx_conf *conf; + + if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_AP_VLAN || !sdata->bss)) + return; + + ap = container_of(sdata->bss, struct ieee80211_sub_if_data, u.ap); + + mutex_lock(&local->chanctx_mtx); + + conf = rcu_dereference_protected(ap->vif.chanctx_conf, + lockdep_is_held(&local->chanctx_mtx)); + rcu_assign_pointer(sdata->vif.chanctx_conf, conf); + mutex_unlock(&local->chanctx_mtx); +} + void ieee80211_iter_chan_contexts_atomic( struct ieee80211_hw *hw, void (*iter)(struct ieee80211_hw *hw, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 112bb6192399..28fc9875537c 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1628,6 +1628,7 @@ ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, const struct cfg80211_chan_def *chandef, enum ieee80211_chanctx_mode mode); void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata); +void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata); void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local, struct ieee80211_chanctx *chanctx); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 09a80b55cf5a..54fb7f9db564 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -586,11 +586,13 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) switch (sdata->vif.type) { case NL80211_IFTYPE_AP_VLAN: - /* no need to tell driver, but set carrier */ - if (rtnl_dereference(sdata->bss->beacon)) + /* no need to tell driver, but set carrier and chanctx */ + if (rtnl_dereference(sdata->bss->beacon)) { + ieee80211_vif_vlan_copy_chanctx(sdata); netif_carrier_on(dev); - else + } else { netif_carrier_off(dev); + } break; case NL80211_IFTYPE_MONITOR: if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) { @@ -839,6 +841,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, switch (sdata->vif.type) { case NL80211_IFTYPE_AP_VLAN: list_del(&sdata->u.vlan.list); + rcu_assign_pointer(sdata->vif.chanctx_conf, NULL); /* no need to tell driver */ break; case NL80211_IFTYPE_MONITOR: From b7cfcd113ac2a1e6b02afc7d283295729fc178a9 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Mon, 17 Dec 2012 18:41:57 -0800 Subject: [PATCH 069/553] mac80211: RMC buckets are just list heads The array of rmc_entrys is redundant since only the list_head is used. Make this an array of list_heads instead and save ~6k per vif at runtime :D Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- net/mac80211/mesh.c | 8 ++++---- net/mac80211/mesh.h | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 1bf03f9ff3ba..649ad513547f 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -163,7 +163,7 @@ int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) return -ENOMEM; sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1; for (i = 0; i < RMC_BUCKETS; i++) - INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i].list); + INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i]); return 0; } @@ -177,7 +177,7 @@ void mesh_rmc_free(struct ieee80211_sub_if_data *sdata) return; for (i = 0; i < RMC_BUCKETS; i++) - list_for_each_entry_safe(p, n, &rmc->bucket[i].list, list) { + list_for_each_entry_safe(p, n, &rmc->bucket[i], list) { list_del(&p->list); kmem_cache_free(rm_cache, p); } @@ -210,7 +210,7 @@ int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr, /* Don't care about endianness since only match matters */ memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum)); idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask; - list_for_each_entry_safe(p, n, &rmc->bucket[idx].list, list) { + list_for_each_entry_safe(p, n, &rmc->bucket[idx], list) { ++entries; if (time_after(jiffies, p->exp_time) || (entries == RMC_QUEUE_MAX_LEN)) { @@ -229,7 +229,7 @@ int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr, p->seqnum = seqnum; p->exp_time = jiffies + RMC_TIMEOUT; memcpy(p->sa, sa, ETH_ALEN); - list_add(&p->list, &rmc->bucket[idx].list); + list_add(&p->list, &rmc->bucket[idx]); return 0; } diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 7c9215fb2ac8..84c28c6101cd 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -184,7 +184,7 @@ struct rmc_entry { }; struct mesh_rmc { - struct rmc_entry bucket[RMC_BUCKETS]; + struct list_head bucket[RMC_BUCKETS]; u32 idx_mask; }; From 97f97b1f5fe0878b35c8e314f98591771696321b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Dec 2012 22:54:58 +0100 Subject: [PATCH 070/553] mac80211: fix station destruction in AP/mesh modes Unfortunately, commit b22cfcfcae5b, intended to speed up roaming by avoiding the synchronize_rcu() broke AP/mesh modes as it moved some code into that work item that will still call into the driver at a time where it's no longer expected to handle this: after the AP or mesh has been stopped. To fix this problem remove the per-station work struct, maintain a station cleanup list instead and flush this list when stations are flushed. To keep this patch smaller for stable, do this when the stations are flushed (sta_info_flush()). This unfortunately brings back the original roaming delay; I'll fix that again in a separate patch. Also, Ben reported that the original commit could sometimes (with many interfaces) cause long delays when an interface is set down, due to blocking on flush_workqueue(). Since we now maintain the cleanup list, this particular change of the original patch can be reverted. Cc: stable@vger.kernel.org [3.7] Reported-by: Ben Greear Tested-by: Ben Greear Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 4 ++++ net/mac80211/iface.c | 28 +++++++++++++----------- net/mac80211/sta_info.c | 44 ++++++++++++++++++++++++++++++++++---- net/mac80211/sta_info.h | 3 ++- 4 files changed, 62 insertions(+), 17 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 28fc9875537c..2fcd274877d7 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -773,6 +773,10 @@ struct ieee80211_sub_if_data { u32 mntr_flags; } u; + spinlock_t cleanup_stations_lock; + struct list_head cleanup_stations; + struct work_struct cleanup_stations_wk; + #ifdef CONFIG_MAC80211_DEBUGFS struct { struct dentry *dir; diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 54fb7f9db564..0f2a9f987f79 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -868,20 +868,11 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, cancel_work_sync(&sdata->work); /* * When we get here, the interface is marked down. - * Call rcu_barrier() to wait both for the RX path + * Call synchronize_rcu() to wait for the RX path * should it be using the interface and enqueuing - * frames at this very time on another CPU, and - * for the sta free call_rcu callbacks. + * frames at this very time on another CPU. */ - rcu_barrier(); - - /* - * free_sta_rcu() enqueues a work for the actual - * sta cleanup, so we need to flush it while - * sdata is still valid. - */ - flush_workqueue(local->workqueue); - + synchronize_rcu(); skb_queue_purge(&sdata->skb_queue); /* @@ -1501,6 +1492,15 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local, mutex_unlock(&local->iflist_mtx); } +static void ieee80211_cleanup_sdata_stas_wk(struct work_struct *wk) +{ + struct ieee80211_sub_if_data *sdata; + + sdata = container_of(wk, struct ieee80211_sub_if_data, cleanup_stations_wk); + + ieee80211_cleanup_sdata_stas(sdata); +} + int ieee80211_if_add(struct ieee80211_local *local, const char *name, struct wireless_dev **new_wdev, enum nl80211_iftype type, struct vif_params *params) @@ -1576,6 +1576,10 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name, INIT_LIST_HEAD(&sdata->key_list); + spin_lock_init(&sdata->cleanup_stations_lock); + INIT_LIST_HEAD(&sdata->cleanup_stations); + INIT_WORK(&sdata->cleanup_stations_wk, ieee80211_cleanup_sdata_stas_wk); + for (i = 0; i < IEEE80211_NUM_BANDS; i++) { struct ieee80211_supported_band *sband; sband = local->hw.wiphy->bands[i]; diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index f3e502502fee..8bbd3b0fdbcc 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -91,9 +91,8 @@ static int sta_info_hash_del(struct ieee80211_local *local, return -ENOENT; } -static void free_sta_work(struct work_struct *wk) +static void cleanup_single_sta(struct sta_info *sta) { - struct sta_info *sta = container_of(wk, struct sta_info, free_sta_wk); int ac, i; struct tid_ampdu_tx *tid_tx; struct ieee80211_sub_if_data *sdata = sta->sdata; @@ -153,11 +152,35 @@ static void free_sta_work(struct work_struct *wk) sta_info_free(local, sta); } +void ieee80211_cleanup_sdata_stas(struct ieee80211_sub_if_data *sdata) +{ + struct sta_info *sta; + + spin_lock_bh(&sdata->cleanup_stations_lock); + while (!list_empty(&sdata->cleanup_stations)) { + sta = list_first_entry(&sdata->cleanup_stations, + struct sta_info, list); + list_del(&sta->list); + spin_unlock_bh(&sdata->cleanup_stations_lock); + + cleanup_single_sta(sta); + + spin_lock_bh(&sdata->cleanup_stations_lock); + } + + spin_unlock_bh(&sdata->cleanup_stations_lock); +} + static void free_sta_rcu(struct rcu_head *h) { struct sta_info *sta = container_of(h, struct sta_info, rcu_head); + struct ieee80211_sub_if_data *sdata = sta->sdata; - ieee80211_queue_work(&sta->local->hw, &sta->free_sta_wk); + spin_lock(&sdata->cleanup_stations_lock); + list_add_tail(&sta->list, &sdata->cleanup_stations); + spin_unlock(&sdata->cleanup_stations_lock); + + ieee80211_queue_work(&sdata->local->hw, &sdata->cleanup_stations_wk); } /* protected by RCU */ @@ -310,7 +333,6 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, spin_lock_init(&sta->lock); INIT_WORK(&sta->drv_unblock_wk, sta_unblock); - INIT_WORK(&sta->free_sta_wk, free_sta_work); INIT_WORK(&sta->ampdu_mlme.work, ieee80211_ba_session_work); mutex_init(&sta->ampdu_mlme.mtx); @@ -891,6 +913,20 @@ int sta_info_flush(struct ieee80211_local *local, } mutex_unlock(&local->sta_mtx); + rcu_barrier(); + + if (sdata) { + ieee80211_cleanup_sdata_stas(sdata); + cancel_work_sync(&sdata->cleanup_stations_wk); + } else { + mutex_lock(&local->iflist_mtx); + list_for_each_entry(sdata, &local->interfaces, list) { + ieee80211_cleanup_sdata_stas(sdata); + cancel_work_sync(&sdata->cleanup_stations_wk); + } + mutex_unlock(&local->iflist_mtx); + } + return ret; } diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 1489bca9ea97..37c1889afd3a 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -299,7 +299,6 @@ struct sta_info { spinlock_t lock; struct work_struct drv_unblock_wk; - struct work_struct free_sta_wk; u16 listen_interval; @@ -563,4 +562,6 @@ void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta); void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta); void ieee80211_sta_ps_deliver_uapsd(struct sta_info *sta); +void ieee80211_cleanup_sdata_stas(struct ieee80211_sub_if_data *sdata); + #endif /* STA_INFO_H */ From a56f992cdabc63f56b4b142885deebebf936ff76 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Dec 2012 23:08:52 +0100 Subject: [PATCH 071/553] mac80211: use del_timer_sync for final sta cleanup timer deletion This is a very old bug, but there's nothing that prevents the timer from running while the module is being removed when we only do del_timer() instead of del_timer_sync(). The timer should normally not be running at this point, but it's not clearly impossible (or we could just remove this.) Cc: stable@vger.kernel.org Tested-by: Ben Greear Signed-off-by: Johannes Berg --- net/mac80211/sta_info.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 8bbd3b0fdbcc..ca9fde198188 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -884,7 +884,7 @@ void sta_info_init(struct ieee80211_local *local) void sta_info_stop(struct ieee80211_local *local) { - del_timer(&local->sta_cleanup); + del_timer_sync(&local->sta_cleanup); sta_info_flush(local, NULL); } From 826262c3d23743cb032a9e1a65a0f9be75091a5e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 10 Dec 2012 16:38:14 +0200 Subject: [PATCH 072/553] mac80211: fix dtim_period in hidden SSID AP association When AP's SSID is hidden the BSS can appear several times in cfg80211's BSS list: once with a zero-length SSID that comes from the beacon, and once for each SSID from probe reponses. Since the mac80211 stores its data in ieee80211_bss which is embedded into cfg80211_bss, mac80211's data will be duplicated too. This becomes a problem when a driver needs the dtim_period since this data exists only in the beacon's instance in cfg80211 bss table which isn't the instance that is used when associating. Remove the DTIM period from the BSS table and track it explicitly to avoid this problem. Cc: stable@vger.kernel.org Tested-by: Efi Tubul Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 5 +-- net/mac80211/mlme.c | 75 +++++++++++++++++++++++++++----------- net/mac80211/scan.c | 12 ------ 3 files changed, 55 insertions(+), 37 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 2fcd274877d7..8563b9a5cac3 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -92,8 +92,6 @@ struct ieee80211_bss { u32 device_ts; - u8 dtim_period; - bool wmm_used; bool uapsd_supported; @@ -140,7 +138,6 @@ enum ieee80211_bss_corrupt_data_flags { /** * enum ieee80211_valid_data_flags - BSS valid data flags - * @IEEE80211_BSS_VALID_DTIM: DTIM data was gathered from non-corrupt IE * @IEEE80211_BSS_VALID_WMM: WMM/UAPSD data was gathered from non-corrupt IE * @IEEE80211_BSS_VALID_RATES: Supported rates were gathered from non-corrupt IE * @IEEE80211_BSS_VALID_ERP: ERP flag was gathered from non-corrupt IE @@ -151,7 +148,6 @@ enum ieee80211_bss_corrupt_data_flags { * beacon/probe response. */ enum ieee80211_bss_valid_data_flags { - IEEE80211_BSS_VALID_DTIM = BIT(0), IEEE80211_BSS_VALID_WMM = BIT(1), IEEE80211_BSS_VALID_RATES = BIT(2), IEEE80211_BSS_VALID_ERP = BIT(3) @@ -440,6 +436,7 @@ struct ieee80211_if_managed { unsigned long timers_running; /* used for quiesce/restart */ bool powersave; /* powersave requested for this iface */ bool broken_ap; /* AP is broken -- turn off powersave */ + u8 dtim_period; enum ieee80211_smps_mode req_smps, /* requested smps mode */ driver_smps_mode; /* smps mode request */ diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7753a9ca98a6..a3552929a21d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1074,12 +1074,8 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency) if (beaconint_us > latency) { local->ps_sdata = NULL; } else { - struct ieee80211_bss *bss; int maxslp = 1; - u8 dtimper; - - bss = (void *)found->u.mgd.associated->priv; - dtimper = bss->dtim_period; + u8 dtimper = found->u.mgd.dtim_period; /* If the TIM IE is invalid, pretend the value is 1 */ if (!dtimper) @@ -1410,10 +1406,17 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, ieee80211_led_assoc(local, 1); - if (local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) - bss_conf->dtim_period = bss->dtim_period; - else + if (local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) { + /* + * If the AP is buggy we may get here with no DTIM period + * known, so assume it's 1 which is the only safe assumption + * in that case, although if the TIM IE is broken powersave + * probably just won't work at all. + */ + bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1; + } else { bss_conf->dtim_period = 0; + } bss_conf->assoc = 1; @@ -1562,6 +1565,8 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, sdata->u.mgd.timers_running = 0; + sdata->vif.bss_conf.dtim_period = 0; + ifmgd->flags = 0; ieee80211_vif_release_channel(sdata); } @@ -2373,11 +2378,18 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, struct ieee80211_channel *channel; bool need_ps = false; - if (sdata->u.mgd.associated && - ether_addr_equal(mgmt->bssid, sdata->u.mgd.associated->bssid)) { - bss = (void *)sdata->u.mgd.associated->priv; + if ((sdata->u.mgd.associated && + ether_addr_equal(mgmt->bssid, sdata->u.mgd.associated->bssid)) || + (sdata->u.mgd.assoc_data && + ether_addr_equal(mgmt->bssid, + sdata->u.mgd.assoc_data->bss->bssid))) { /* not previously set so we may need to recalc */ - need_ps = !bss->dtim_period; + need_ps = sdata->u.mgd.associated && !sdata->u.mgd.dtim_period; + + if (elems->tim && !elems->parse_error) { + struct ieee80211_tim_ie *tim_ie = elems->tim; + sdata->u.mgd.dtim_period = tim_ie->dtim_period; + } } if (elems->ds_params && elems->ds_params_len == 1) @@ -3896,20 +3908,41 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, /* kick off associate process */ ifmgd->assoc_data = assoc_data; + ifmgd->dtim_period = 0; err = ieee80211_prep_connection(sdata, req->bss, true); if (err) goto err_clear; - if (!bss->dtim_period && - sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) { - /* - * Wait up to one beacon interval ... - * should this be more if we miss one? - */ - sdata_info(sdata, "waiting for beacon from %pM\n", - ifmgd->bssid); - assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval); + if (sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) { + const struct cfg80211_bss_ies *beacon_ies; + + rcu_read_lock(); + beacon_ies = rcu_dereference(req->bss->beacon_ies); + if (!beacon_ies) { + /* + * Wait up to one beacon interval ... + * should this be more if we miss one? + */ + sdata_info(sdata, "waiting for beacon from %pM\n", + ifmgd->bssid); + assoc_data->timeout = + TU_TO_EXP_TIME(req->bss->beacon_interval); + } else { + const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, + beacon_ies->data, + beacon_ies->len); + if (tim_ie && tim_ie[1] >= + sizeof(struct ieee80211_tim_ie)) { + const struct ieee80211_tim_ie *tim; + tim = (void *)(tim_ie + 2); + ifmgd->dtim_period = tim->dtim_period; + } + assoc_data->have_beacon = true; + assoc_data->sent_assoc = false; + assoc_data->timeout = jiffies; + } + rcu_read_unlock(); } else { assoc_data->have_beacon = true; assoc_data->sent_assoc = false; diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index de3532d18df1..d59fc6818b1c 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -113,18 +113,6 @@ ieee80211_bss_info_update(struct ieee80211_local *local, bss->valid_data |= IEEE80211_BSS_VALID_ERP; } - if (elems->tim && (!elems->parse_error || - !(bss->valid_data & IEEE80211_BSS_VALID_DTIM))) { - struct ieee80211_tim_ie *tim_ie = elems->tim; - bss->dtim_period = tim_ie->dtim_period; - if (!elems->parse_error) - bss->valid_data |= IEEE80211_BSS_VALID_DTIM; - } - - /* If the beacon had no TIM IE, or it was invalid, use 1 */ - if (beacon && !bss->dtim_period) - bss->dtim_period = 1; - /* replace old supported rates if we get new values */ if (!elems->parse_error || !(bss->valid_data & IEEE80211_BSS_VALID_RATES)) { From 09b1426e7fcec510aba55a761da5004e47a11ce3 Mon Sep 17 00:00:00 2001 From: Chaitanya Date: Fri, 21 Dec 2012 17:15:17 +0530 Subject: [PATCH 073/553] mac80211: fix maximum MTU The maximum MTU shouldn't take the headers into account, the maximum MSDU size is exactly the maximum MTU. Signed-off-by: T Krishna Chaitanya Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 0f2a9f987f79..8be854e86cd9 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -207,17 +207,8 @@ void ieee80211_recalc_idle(struct ieee80211_local *local) static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) { - int meshhdrlen; - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); - - meshhdrlen = (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) ? 5 : 0; - - /* FIX: what would be proper limits for MTU? - * This interface uses 802.3 frames. */ - if (new_mtu < 256 || - new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) { + if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN) return -EINVAL; - } dev->mtu = new_mtu; return 0; From 0384618a79ccfafd05ca1538867764f7c4b7916b Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 3 Jan 2013 21:01:47 +0800 Subject: [PATCH 074/553] regulator: core: Fix comment for regulator_register() regulator_register() does not return 0 on success, fix the comment. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index d7448adc7a2c..278584302f2d 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -3321,7 +3321,8 @@ static void rdev_init_debugfs(struct regulator_dev *rdev) * @config: runtime configuration for regulator * * Called by regulator drivers to register a regulator. - * Returns 0 on success. + * Returns a valid pointer to struct regulator_dev on success + * or an ERR_PTR() on error. */ struct regulator_dev * regulator_register(const struct regulator_desc *regulator_desc, From 392d4cad7907f6cb4ffc85e135a01abfddc89027 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 21:37:04 +0100 Subject: [PATCH 075/553] iwlwifi: fix PCIe interrupt handle return value By accident, commit eb6476441bc2fecf6232a87d0313a85f8e3da7f4 ("iwlwifi: protect use_ict with irq_lock") changed the return value of the iwl_pcie_isr() function in case it handles an interrupt -- it now returns IRQ_NONE instead of IRQ_HANDLED. Put back the correct return value. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/rx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index dad4c4aad91f..8389cd38338b 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -1166,6 +1166,7 @@ static irqreturn_t iwl_pcie_isr(int irq, void *data) else if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && !trans_pcie->inta) iwl_enable_interrupts(trans); + return IRQ_HANDLED; none: /* re-enable interrupts here since we don't have anything to service. */ From f590dcec944552f9a4a61155810f3abd17d6465d Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 31 Dec 2012 09:26:10 +0200 Subject: [PATCH 076/553] iwlwifi: fix the reclaimed packet tracking upon flush queue There's a bug in the currently released firmware version, the sequence control in the Tx response isn't updated in all cases. Take it from the packet as a workaround. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/tx.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index da21328ca8ed..a790599fe2c2 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -1151,13 +1151,6 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, next_reclaimed = ssn; } - if (tid != IWL_TID_NON_QOS) { - priv->tid_data[sta_id][tid].next_reclaimed = - next_reclaimed; - IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n", - next_reclaimed); - } - iwl_trans_reclaim(priv->trans, txq_id, ssn, &skbs); iwlagn_check_ratid_empty(priv, sta_id, tid); @@ -1208,11 +1201,28 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, if (!is_agg) iwlagn_non_agg_tx_status(priv, ctx, hdr->addr1); + /* + * W/A for FW bug - the seq_ctl isn't updated when the + * queues are flushed. Fetch it from the packet itself + */ + if (!is_agg && status == TX_STATUS_FAIL_FIFO_FLUSHED) { + next_reclaimed = le16_to_cpu(hdr->seq_ctrl); + next_reclaimed = + SEQ_TO_SN(next_reclaimed + 0x10); + } + is_offchannel_skb = (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN); freed++; } + if (tid != IWL_TID_NON_QOS) { + priv->tid_data[sta_id][tid].next_reclaimed = + next_reclaimed; + IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n", + next_reclaimed); + } + WARN_ON(!is_agg && freed != 1); /* From 55c1945edaac94c5338a3647bc2e85ff75d9cf36 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 17 Dec 2012 14:12:35 -0800 Subject: [PATCH 077/553] xhci: Handle HS bulk/ctrl endpoints that don't NAK. A high speed control or bulk endpoint may have bInterval set to zero, which means it does not NAK. If bInterval is non-zero, it means the endpoint NAKs at a rate of 2^(bInterval - 1). The xHCI code to compute the NAK interval does not handle the special case of zero properly. The current code unconditionally subtracts one from bInterval and uses it as an exponent. This causes a very large bInterval to be used, and warning messages like these will be printed: usb 1-1: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes This may cause the xHCI host hardware to reject the Configure Endpoint command, which means the HS device will be unusable under xHCI ports. This patch should be backported to kernels as old as 2.6.31, that contain commit dfa49c4ad120a784ef1ff0717168aa79f55a483a "USB: xhci - fix math in xhci_get_endpoint_interval()". Reported-by: Vincent Pelletier Suggested-by: Alan Stern Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-mem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index fb51c7085ad0..35616ffbe3ae 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1250,6 +1250,8 @@ static unsigned int xhci_microframes_to_exponent(struct usb_device *udev, static unsigned int xhci_parse_microframe_interval(struct usb_device *udev, struct usb_host_endpoint *ep) { + if (ep->desc.bInterval == 0) + return 0; return xhci_microframes_to_exponent(udev, ep, ep->desc.bInterval, 0, 15); } From 1c7439c61fa6516419c32a9824976334ea969d47 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 14 Nov 2012 15:58:52 -0800 Subject: [PATCH 078/553] USB: Handle auto-transition from hot to warm reset. USB 3.0 hubs and roothubs will automatically transition a failed hot reset to a warm (BH) reset. In that case, the warm reset change bit will be set, and the link state change bit may also be set. Change hub_port_finish_reset to unconditionally clear those change bits for USB 3.0 hubs. If these bits are not cleared, we may lose port change events from the roothub. This commit should be backported to kernels as old as 3.2, that contain the commit 75d7cf72ab9fa01dc70877aa5c68e8ef477229dc "usbcore: refine warm reset logic". Signed-off-by: Sarah Sharp Acked-by: Alan Stern Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a815fd2cc5e7..7f8f10ec127e 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2580,16 +2580,16 @@ static void hub_port_finish_reset(struct usb_hub *hub, int port1, clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_RESET); /* FIXME need disconnect() for NOTATTACHED device */ - if (warm) { + if (hub_is_superspeed(hub->hdev)) { clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_BH_PORT_RESET); clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_PORT_LINK_STATE); - } else { + } + if (!warm) usb_set_device_state(udev, *status ? USB_STATE_NOTATTACHED : USB_STATE_DEFAULT); - } break; } } From 8b8132bc3d1cc3d4c0687e4d638a482fa920d98a Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 14 Nov 2012 16:10:49 -0800 Subject: [PATCH 079/553] USB: Ignore xHCI Reset Device status. When the USB core finishes reseting a USB device, the xHCI driver sends a Reset Device command to the host. The xHC then updates its internal representation of the USB device to the 'Default' device state. If the device was already in the Default state, the xHC will complete the command with an error status. If a device needs to be reset several times during enumeration, the second reset will always fail because of the xHCI Reset Device command. This can cause issues during enumeration. For example, usb_reset_and_verify_device calls into hub_port_init in a loop. Say that on the first call into hub_port_init, the device is successfully reset, but doesn't respond to several set address control transfers. Then the port will be disabled, but the udev will remain in tact. usb_reset_and_verify_device will call into hub_port_init again. On the second call into hub_port_init, the device will be reset, and the xHCI driver will issue a Reset Device command. This command will fail (because the device is already in the Default state), and usb_reset_and_verify_device will fail. The port will be disabled, and the device won't be able to enumerate. Fix this by ignoring the return value of the HCD reset_device callback. This commit should be backported to kernels as old as 3.2, that contain the commit 75d7cf72ab9fa01dc70877aa5c68e8ef477229dc "usbcore: refine warm reset logic". Signed-off-by: Sarah Sharp Acked-by: Alan Stern Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 7f8f10ec127e..3bc50fc110eb 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2565,14 +2565,11 @@ static void hub_port_finish_reset(struct usb_hub *hub, int port1, msleep(10 + 40); update_devnum(udev, 0); hcd = bus_to_hcd(udev->bus); - if (hcd->driver->reset_device) { - *status = hcd->driver->reset_device(hcd, udev); - if (*status < 0) { - dev_err(&udev->dev, "Cannot reset " - "HCD device state\n"); - break; - } - } + /* The xHC may think the device is already reset, + * so ignore the status. + */ + if (hcd->driver->reset_device) + hcd->driver->reset_device(hcd, udev); } /* FALL THROUGH */ case -ENOTCONN: From 41e7e056cdc662f704fa9262e5c6e213b4ab45dd Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 14 Nov 2012 16:42:32 -0800 Subject: [PATCH 080/553] USB: Allow USB 3.0 ports to be disabled. If hot and warm reset fails, or a port remains in the Compliance Mode, the USB core needs to be able to disable a USB 3.0 port. Unlike USB 2.0 ports, once the port is placed into the Disabled link state, it will not report any new device connects. To get device connect notifications, we need to put the link into the Disabled state, and then the RxDetect state. The xHCI driver needs to atomically clear all change bits on USB 3.0 port disable, so that we get Port Status Change Events for future port changes. We could technically do this in the USB core instead of in the xHCI roothub code, since the port state machine can't advance out of the disabled state until we set the link state to RxDetect. However, external USB 3.0 hubs don't need this code. They are level-triggered, not edge-triggered like xHCI, so they will continue to send interrupt events when any change bit is set. Therefore it doesn't make sense to put this code in the USB core. This patch is part of a series to fix several reports of infinite loops on device enumeration failure. This includes John, when he boots with a USB 3.0 device (Roseweil eusb3 enclosure) attached to his NEC 0.96 host controller. The fix requires warm reset support, so it does not make sense to backport this patch to stable kernels without warm reset support. This patch should be backported to kernels as old as 3.2, contain the commit ID 75d7cf72ab9fa01dc70877aa5c68e8ef477229dc "usbcore: refine warm reset logic" Signed-off-by: Sarah Sharp Acked-by: Alan Stern Reported-by: John Covici Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 63 +++++++++++++++++++++++++++++++++++-- drivers/usb/host/xhci-hub.c | 31 ++++++++++++++++-- 2 files changed, 90 insertions(+), 4 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 3bc50fc110eb..968ec37a0f02 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -877,6 +877,60 @@ static int hub_hub_status(struct usb_hub *hub, return ret; } +static int hub_set_port_link_state(struct usb_hub *hub, int port1, + unsigned int link_status) +{ + return set_port_feature(hub->hdev, + port1 | (link_status << 3), + USB_PORT_FEAT_LINK_STATE); +} + +/* + * If USB 3.0 ports are placed into the Disabled state, they will no longer + * detect any device connects or disconnects. This is generally not what the + * USB core wants, since it expects a disabled port to produce a port status + * change event when a new device connects. + * + * Instead, set the link state to Disabled, wait for the link to settle into + * that state, clear any change bits, and then put the port into the RxDetect + * state. + */ +static int hub_usb3_port_disable(struct usb_hub *hub, int port1) +{ + int ret; + int total_time; + u16 portchange, portstatus; + + if (!hub_is_superspeed(hub->hdev)) + return -EINVAL; + + ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED); + if (ret) { + dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n", + port1, ret); + return ret; + } + + /* Wait for the link to enter the disabled state. */ + for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) { + ret = hub_port_status(hub, port1, &portstatus, &portchange); + if (ret < 0) + return ret; + + if ((portstatus & USB_PORT_STAT_LINK_STATE) == + USB_SS_PORT_LS_SS_DISABLED) + break; + if (total_time >= HUB_DEBOUNCE_TIMEOUT) + break; + msleep(HUB_DEBOUNCE_STEP); + } + if (total_time >= HUB_DEBOUNCE_TIMEOUT) + dev_warn(hub->intfdev, "Could not disable port %d after %d ms\n", + port1, total_time); + + return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT); +} + static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) { struct usb_device *hdev = hub->hdev; @@ -885,8 +939,13 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) if (hub->ports[port1 - 1]->child && set_state) usb_set_device_state(hub->ports[port1 - 1]->child, USB_STATE_NOTATTACHED); - if (!hub->error && !hub_is_superspeed(hub->hdev)) - ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE); + if (!hub->error) { + if (hub_is_superspeed(hub->hdev)) + ret = hub_usb3_port_disable(hub, port1); + else + ret = clear_port_feature(hdev, port1, + USB_PORT_FEAT_ENABLE); + } if (ret) dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n", port1, ret); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index a686cf4905bb..a7dd4f311e14 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -761,12 +761,39 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; case USB_PORT_FEAT_LINK_STATE: temp = xhci_readl(xhci, port_array[wIndex]); + + /* Disable port */ + if (link_state == USB_SS_PORT_LS_SS_DISABLED) { + xhci_dbg(xhci, "Disable port %d\n", wIndex); + temp = xhci_port_state_to_neutral(temp); + /* + * Clear all change bits, so that we get a new + * connection event. + */ + temp |= PORT_CSC | PORT_PEC | PORT_WRC | + PORT_OCC | PORT_RC | PORT_PLC | + PORT_CEC; + xhci_writel(xhci, temp | PORT_PE, + port_array[wIndex]); + temp = xhci_readl(xhci, port_array[wIndex]); + break; + } + + /* Put link in RxDetect (enable port) */ + if (link_state == USB_SS_PORT_LS_RX_DETECT) { + xhci_dbg(xhci, "Enable port %d\n", wIndex); + xhci_set_link_state(xhci, port_array, wIndex, + link_state); + temp = xhci_readl(xhci, port_array[wIndex]); + break; + } + /* Software should not attempt to set - * port link state above '5' (Rx.Detect) and the port + * port link state above '3' (U3) and the port * must be enabled. */ if ((temp & PORT_PE) == 0 || - (link_state > USB_SS_PORT_LS_RX_DETECT)) { + (link_state > USB_SS_PORT_LS_U3)) { xhci_warn(xhci, "Cannot set link state.\n"); goto error; } From 77c7f072c87fa951e9a74805febf26466f31170c Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 14 Nov 2012 17:16:52 -0800 Subject: [PATCH 081/553] USB: Increase reset timeout. John's NEC 0.96 xHCI host controller needs a longer timeout for a warm reset to complete. The logs show it takes 650ms to complete the warm reset, so extend the hub reset timeout to 800ms to be on the safe side. This commit should be backported to kernels as old as 3.2, that contain the commit 75d7cf72ab9fa01dc70877aa5c68e8ef477229dc "usbcore: refine warm reset logic". Signed-off-by: Sarah Sharp Acked-by: Alan Stern Reported-by: John Covici Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 968ec37a0f02..b9ce5e8bda51 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2499,7 +2499,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub) #define HUB_SHORT_RESET_TIME 10 #define HUB_BH_RESET_TIME 50 #define HUB_LONG_RESET_TIME 200 -#define HUB_RESET_TIMEOUT 500 +#define HUB_RESET_TIMEOUT 800 static int hub_port_reset(struct usb_hub *hub, int port1, struct usb_device *udev, unsigned int delay, bool warm); From 4f43447e62b37ee19c82a13f72f35b1ca60a74d3 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 15 Nov 2012 14:58:04 -0800 Subject: [PATCH 082/553] USB: Ignore port state until reset completes. The port reset code bails out early if the current connect status is cleared (device disconnected). If we're issuing a hot reset, it may also look at the link state before the reset is finished. Section 10.14.2.6 of the USB 3.0 spec says that when a port enters the Error state or Resetting state, the port connection bit retains the value from the previous state. Therefore we can't trust it until the reset finishes. Also, the xHCI spec section 4.19.1.2.5 says software shall ignore the link state while the port is resetting, as it can be in an unknown state. The port state during reset is also unknown for USB 2.0 hubs. The hub sends a reset signal by driving the bus into an SE0 state. This overwhelms the "connect" signal from the device, so the port can't tell whether anything is connected or not. Fix the port reset code to ignore the port link state and current connect bit until the reset finishes, and USB_PORT_STAT_RESET is cleared. Remove the check for USB_PORT_STAT_C_BH_RESET in the warm reset case, because it's redundant. When the warm reset finishes, the port reset bit will be cleared at the same time USB_PORT_STAT_C_BH_RESET is set. Remove the now-redundant check for a cleared USB_PORT_STAT_RESET bit in the code to deal with the finished reset. This patch should be backported to all stable kernels. Signed-off-by: Sarah Sharp Acked-by: Alan Stern Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b9ce5e8bda51..42566d774d18 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2534,6 +2534,10 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, if (ret < 0) return ret; + /* The port state is unknown until the reset completes. */ + if ((portstatus & USB_PORT_STAT_RESET)) + goto delay; + /* * Some buggy devices require a warm reset to be issued even * when the port appears not to be connected. @@ -2579,11 +2583,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, if ((portchange & USB_PORT_STAT_C_CONNECTION)) return -ENOTCONN; - /* if we`ve finished resetting, then break out of - * the loop - */ - if (!(portstatus & USB_PORT_STAT_RESET) && - (portstatus & USB_PORT_STAT_ENABLE)) { + if ((portstatus & USB_PORT_STAT_ENABLE)) { if (hub_is_wusb(hub)) udev->speed = USB_SPEED_WIRELESS; else if (hub_is_superspeed(hub->hdev)) @@ -2597,10 +2597,10 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, return 0; } } else { - if (portchange & USB_PORT_STAT_C_BH_RESET) - return 0; + return 0; } +delay: /* switch to the long delay after two short delay failures */ if (delay_time >= 2 * HUB_SHORT_RESET_TIME) delay = HUB_LONG_RESET_TIME; From 65bdac5effd15d6af619b3b7218627ef4d84ed6a Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 14 Nov 2012 17:58:04 -0800 Subject: [PATCH 083/553] USB: Handle warm reset failure on empty port. An empty port can transition to either Inactive or Compliance Mode if a newly connected USB 3.0 device fails to link train. In that case, we issue a warm reset. Some devices, such as John's Roseweil eusb3 enclosure, slip back into Compliance Mode after the warm reset. The current warm reset code does not check for device connect status on warm reset completion, and it incorrectly reports the warm reset succeeded. This causes the USB core to attempt to send a Set Address control transfer to a port in Compliance Mode, which will always fail. Make hub_port_wait_reset check the current connect status and link state after the warm reset completes. Return a failure status if the device is disconnected or the link state is Compliance Mode or SS.Inactive. Make hub_events disable the port if warm reset fails. This will disable the port, and then bring it back into the RxDetect state. Make the USB core ignore the connect change until the device reconnects. Note that this patch does NOT handle connected devices slipping into the Inactive state very well. This is a concern, because devices can go into the Inactive state on U1/U2 exit failure. However, the fix for that case is too large for stable, so it will be submitted in a separate patch. This patch should be backported to kernels as old as 3.2, contain the commit ID 75d7cf72ab9fa01dc70877aa5c68e8ef477229dc "usbcore: refine warm reset logic" Signed-off-by: Sarah Sharp Acked-by: Alan Stern Reported-by: John Covici Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 42566d774d18..9641e9c1dec5 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2597,6 +2597,11 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, return 0; } } else { + if (!(portstatus & USB_PORT_STAT_CONNECTION) || + hub_port_warm_reset_required(hub, + portstatus)) + return -ENOTCONN; + return 0; } @@ -4694,9 +4699,14 @@ static void hub_events(void) * SS.Inactive state. */ if (hub_port_warm_reset_required(hub, portstatus)) { + int status; + dev_dbg(hub_dev, "warm reset port %d\n", i); - hub_port_reset(hub, i, NULL, + status = hub_port_reset(hub, i, NULL, HUB_BH_RESET_TIME, true); + if (status < 0) + hub_port_disable(hub, i, 1); + connect_change = 0; } if (connect_change) From c52804a472649b2e5005342308739434cbd51119 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 27 Nov 2012 12:30:23 -0800 Subject: [PATCH 084/553] xhci: Avoid "dead ports", add roothub port polling. The USB core hub thread (khubd) is designed with external USB hubs in mind. It expects that if a port status change bit is set, the hub will continue to send a notification through the hub status data transfer. Basically, it expects hub notifications to be level-triggered. The xHCI host controller is designed to be edge-triggered on the logical 'OR' of all the port status change bits. When all port status change bits are clear, and a new change bit is set, the xHC will generate a Port Status Change Event. If another change bit is set in the same port status register before the first bit is cleared, it will not send another event. This means that the hub code may lose port status changes because of race conditions between clearing change bits. The user sees this as a "dead port" that doesn't react to device connects. The fix is to turn on port polling whenever a new change bit is set. Once the USB core issues a hub status request that shows that no change bits are set in any USB ports, turn off port polling. We can't allow the USB core to poll the roothub for port events during host suspend because if the PCI host is in D3cold, the port registers will be all f's. Instead, stop the port polling timer, and unconditionally restart it when the host resumes. If there are no port change bits set after the resume, the first call to hub_status_data will disable polling. This patch should be backported to stable kernels with the first xHCI support, 2.6.31 and newer, that include the commit 0f2a79300a1471cf92ab43af165ea13555c8b0a5 "USB: xhci: Root hub support." There will be merge conflicts because the check for HC_STATE_SUSPENDED was moved into xhci_suspend in 3.8. Signed-off-by: Sarah Sharp Acked-by: Alan Stern Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-hub.c | 7 +++++++ drivers/usb/host/xhci-ring.c | 9 +++++++++ drivers/usb/host/xhci.c | 10 ++++++++++ 3 files changed, 26 insertions(+) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index a7dd4f311e14..68914429482f 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -984,6 +984,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) int max_ports; __le32 __iomem **port_array; struct xhci_bus_state *bus_state; + bool reset_change = false; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; @@ -1015,6 +1016,12 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) buf[(i + 1) / 8] |= 1 << (i + 1) % 8; status = 1; } + if ((temp & PORT_RC)) + reset_change = true; + } + if (!status && !reset_change) { + xhci_dbg(xhci, "%s: stopping port polling.\n", __func__); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); } spin_unlock_irqrestore(&xhci->lock, flags); return status ? retval : 0; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index cbb44b7b9d65..59fb5c677dbe 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1725,6 +1725,15 @@ cleanup: if (bogus_port_status) return; + /* + * xHCI port-status-change events occur when the "or" of all the + * status-change bits in the portsc register changes from 0 to 1. + * New status changes won't cause an event if any other change + * bits are still set. When an event occurs, switch over to + * polling to avoid losing status changes. + */ + xhci_dbg(xhci, "%s: starting port polling.\n", __func__); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); spin_unlock(&xhci->lock); /* Pass this up to the core */ usb_hcd_poll_rh_status(hcd); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 5c72c431bab1..f1f01a834ba7 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -884,6 +884,11 @@ int xhci_suspend(struct xhci_hcd *xhci) xhci->shared_hcd->state != HC_STATE_SUSPENDED) return -EINVAL; + /* Don't poll the roothubs on bus suspend. */ + xhci_dbg(xhci, "%s: stopping port polling.\n", __func__); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); + spin_lock_irq(&xhci->lock); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); @@ -1069,6 +1074,11 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) if (xhci->quirks & XHCI_COMP_MODE_QUIRK) compliance_mode_recovery_timer_init(xhci); + /* Re-enable port polling. */ + xhci_dbg(xhci, "%s: starting port polling.\n", __func__); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + usb_hcd_poll_rh_status(hcd); + return retval; } #endif /* CONFIG_PM */ From a07ef784356cf9157bd9bed5254cbb9a82d33722 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sun, 30 Dec 2012 14:52:05 +0900 Subject: [PATCH 085/553] f2fs: introduce f2fs_msg to ease adding information prints Introduced f2fs_msg function to differentiate f2fs specific messages in the log. And, added few informative prints in the mount path, to convey proper error in case of mount failure. Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim --- fs/f2fs/f2fs.h | 2 ++ fs/f2fs/super.c | 80 ++++++++++++++++++++++++++++++++++++++----------- 2 files changed, 65 insertions(+), 17 deletions(-) diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 13c6dfbb7183..8199ee9f5875 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -877,6 +877,8 @@ bool f2fs_empty_dir(struct inode *); * super.c */ int f2fs_sync_fs(struct super_block *, int); +extern __printf(3, 4) +void f2fs_msg(struct super_block *, const char *, const char *, ...); /* * hash.c diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index 08a94c814bdc..afa7ef0c4ba7 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -53,6 +53,18 @@ static match_table_t f2fs_tokens = { {Opt_err, NULL}, }; +void f2fs_msg(struct super_block *sb, const char *level, const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + va_start(args, fmt); + vaf.fmt = fmt; + vaf.va = &args; + printk("%sF2FS-fs (%s): %pV\n", level, sb->s_id, &vaf); + va_end(args); +} + static void init_once(void *foo) { struct f2fs_inode_info *fi = (struct f2fs_inode_info *) foo; @@ -247,7 +259,8 @@ static const struct export_operations f2fs_export_ops = { .get_parent = f2fs_get_parent, }; -static int parse_options(struct f2fs_sb_info *sbi, char *options) +static int parse_options(struct super_block *sb, struct f2fs_sb_info *sbi, + char *options) { substring_t args[MAX_OPT_ARGS]; char *p; @@ -286,7 +299,8 @@ static int parse_options(struct f2fs_sb_info *sbi, char *options) break; #else case Opt_nouser_xattr: - pr_info("nouser_xattr options not supported\n"); + f2fs_msg(sb, KERN_INFO, + "nouser_xattr options not supported"); break; #endif #ifdef CONFIG_F2FS_FS_POSIX_ACL @@ -295,7 +309,7 @@ static int parse_options(struct f2fs_sb_info *sbi, char *options) break; #else case Opt_noacl: - pr_info("noacl options not supported\n"); + f2fs_msg(sb, KERN_INFO, "noacl options not supported"); break; #endif case Opt_active_logs: @@ -309,8 +323,9 @@ static int parse_options(struct f2fs_sb_info *sbi, char *options) set_opt(sbi, DISABLE_EXT_IDENTIFY); break; default: - pr_err("Unrecognized mount option \"%s\" or missing value\n", - p); + f2fs_msg(sb, KERN_ERR, + "Unrecognized mount option \"%s\" or missing value", + p); return -EINVAL; } } @@ -337,23 +352,36 @@ static loff_t max_file_size(unsigned bits) return result; } -static int sanity_check_raw_super(struct f2fs_super_block *raw_super) +static int sanity_check_raw_super(struct super_block *sb, + struct f2fs_super_block *raw_super) { unsigned int blocksize; - if (F2FS_SUPER_MAGIC != le32_to_cpu(raw_super->magic)) + if (F2FS_SUPER_MAGIC != le32_to_cpu(raw_super->magic)) { + f2fs_msg(sb, KERN_INFO, + "Magic Mismatch, valid(0x%x) - read(0x%x)", + F2FS_SUPER_MAGIC, le32_to_cpu(raw_super->magic)); return 1; + } /* Currently, support only 4KB block size */ blocksize = 1 << le32_to_cpu(raw_super->log_blocksize); - if (blocksize != PAGE_CACHE_SIZE) + if (blocksize != PAGE_CACHE_SIZE) { + f2fs_msg(sb, KERN_INFO, + "Invalid blocksize (%u), supports only 4KB\n", + blocksize); return 1; + } if (le32_to_cpu(raw_super->log_sectorsize) != - F2FS_LOG_SECTOR_SIZE) + F2FS_LOG_SECTOR_SIZE) { + f2fs_msg(sb, KERN_INFO, "Invalid log sectorsize"); return 1; + } if (le32_to_cpu(raw_super->log_sectors_per_block) != - F2FS_LOG_SECTORS_PER_BLOCK) + F2FS_LOG_SECTORS_PER_BLOCK) { + f2fs_msg(sb, KERN_INFO, "Invalid log sectors per block"); return 1; + } return 0; } @@ -414,13 +442,16 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent) return -ENOMEM; /* set a temporary block size */ - if (!sb_set_blocksize(sb, F2FS_BLKSIZE)) + if (!sb_set_blocksize(sb, F2FS_BLKSIZE)) { + f2fs_msg(sb, KERN_ERR, "unable to set blocksize"); goto free_sbi; + } /* read f2fs raw super block */ raw_super_buf = sb_bread(sb, 0); if (!raw_super_buf) { err = -EIO; + f2fs_msg(sb, KERN_ERR, "unable to read superblock"); goto free_sbi; } raw_super = (struct f2fs_super_block *) @@ -438,12 +469,14 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent) set_opt(sbi, POSIX_ACL); #endif /* parse mount options */ - if (parse_options(sbi, (char *)data)) + if (parse_options(sb, sbi, (char *)data)) goto free_sb_buf; /* sanity checking of raw super */ - if (sanity_check_raw_super(raw_super)) + if (sanity_check_raw_super(sb, raw_super)) { + f2fs_msg(sb, KERN_ERR, "Can't find a valid F2FS filesystem"); goto free_sb_buf; + } sb->s_maxbytes = max_file_size(le32_to_cpu(raw_super->log_blocksize)); sb->s_max_links = F2FS_LINK_MAX; @@ -477,18 +510,23 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent) /* get an inode for meta space */ sbi->meta_inode = f2fs_iget(sb, F2FS_META_INO(sbi)); if (IS_ERR(sbi->meta_inode)) { + f2fs_msg(sb, KERN_ERR, "Failed to read F2FS meta data inode"); err = PTR_ERR(sbi->meta_inode); goto free_sb_buf; } err = get_valid_checkpoint(sbi); - if (err) + if (err) { + f2fs_msg(sb, KERN_ERR, "Failed to get valid F2FS checkpoint"); goto free_meta_inode; + } /* sanity checking of checkpoint */ err = -EINVAL; - if (sanity_check_ckpt(raw_super, sbi->ckpt)) + if (sanity_check_ckpt(raw_super, sbi->ckpt)) { + f2fs_msg(sb, KERN_ERR, "Invalid F2FS checkpoint"); goto free_cp; + } sbi->total_valid_node_count = le32_to_cpu(sbi->ckpt->valid_node_count); @@ -510,17 +548,24 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent) /* setup f2fs internal modules */ err = build_segment_manager(sbi); - if (err) + if (err) { + f2fs_msg(sb, KERN_ERR, + "Failed to initialize F2FS segment manager"); goto free_sm; + } err = build_node_manager(sbi); - if (err) + if (err) { + f2fs_msg(sb, KERN_ERR, + "Failed to initialize F2FS node manager"); goto free_nm; + } build_gc_manager(sbi); /* get an inode for node space */ sbi->node_inode = f2fs_iget(sb, F2FS_NODE_INO(sbi)); if (IS_ERR(sbi->node_inode)) { + f2fs_msg(sb, KERN_ERR, "Failed to read node inode"); err = PTR_ERR(sbi->node_inode); goto free_nm; } @@ -533,6 +578,7 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent) /* read root inode and dentry */ root = f2fs_iget(sb, F2FS_ROOT_INO(sbi)); if (IS_ERR(root)) { + f2fs_msg(sb, KERN_ERR, "Failed to read root inode"); err = PTR_ERR(root); goto free_node_inode; } From 3af60a49fd2edfe9c5a06bc84d4832450895be96 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sun, 30 Dec 2012 14:52:37 +0900 Subject: [PATCH 086/553] f2fs: fix time update in case of f2fs fallocate After doing a punch hole or expanding inode doing fallocation. The change and modification time are not update for the file. So, update time after no issue is observed in fallocate. Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim --- fs/f2fs/file.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index 7f9ea9271ebe..88593c5e743c 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -545,6 +545,11 @@ static long f2fs_fallocate(struct file *file, int mode, else ret = expand_inode_data(inode, offset, len, mode); + if (!ret) { + inode->i_mtime = inode->i_ctime = CURRENT_TIME; + mark_inode_dirty(inode); + } + f2fs_balance_fs(sbi); return ret; } From 24c366a9ea256b86426b42e75f764495a2558861 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sun, 30 Dec 2012 14:53:08 +0900 Subject: [PATCH 087/553] f2fs: remove unneeded INIT_LIST_HEAD at few places While creating a new entry for addition to the list(orphan inode list and fsync inode entry list), there is no need to call HEAD initialization for these entries. So, remove that init part. Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim --- fs/f2fs/checkpoint.c | 1 - fs/f2fs/recovery.c | 1 - 2 files changed, 2 deletions(-) diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c index 6ef36c37e2be..d75c86a17893 100644 --- a/fs/f2fs/checkpoint.c +++ b/fs/f2fs/checkpoint.c @@ -214,7 +214,6 @@ retry: goto retry; } new->ino = ino; - INIT_LIST_HEAD(&new->list); /* add new_oentry into list which is sorted by inode number */ if (orphan) { diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c index b571fee677d5..502c63d8f096 100644 --- a/fs/f2fs/recovery.c +++ b/fs/f2fs/recovery.c @@ -151,7 +151,6 @@ static int find_fsync_dnodes(struct f2fs_sb_info *sbi, struct list_head *head) goto out; } - INIT_LIST_HEAD(&entry->list); list_add_tail(&entry->list, head); entry->blkaddr = blkaddr; } From 9268cc3523c120eed04a6ad980753d6e7b82d071 Mon Sep 17 00:00:00 2001 From: Huajun Li Date: Mon, 31 Dec 2012 13:59:04 +0800 Subject: [PATCH 088/553] f2fs: update f2fs document to reflect SIT/NAT layout correctly document to reflect the layout generated by mkfs.f2fs . Signed-off-by: Huajun Li Signed-off-by: Jaegeuk Kim --- Documentation/filesystems/f2fs.txt | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt index 8fbd8b46ee34..dcf338e62b71 100644 --- a/Documentation/filesystems/f2fs.txt +++ b/Documentation/filesystems/f2fs.txt @@ -175,9 +175,9 @@ consists of multiple segments as described below. align with the zone size <-| |-> align with the segment size _________________________________________________________________________ - | | | Node | Segment | Segment | | - | Superblock | Checkpoint | Address | Info. | Summary | Main | - | (SB) | (CP) | Table (NAT) | Table (SIT) | Area (SSA) | | + | | | Segment | Node | Segment | | + | Superblock | Checkpoint | Info. | Address | Summary | Main | + | (SB) | (CP) | Table (SIT) | Table (NAT) | Area (SSA) | | |____________|_____2______|______N______|______N______|______N_____|__N___| . . . . @@ -200,14 +200,14 @@ consists of multiple segments as described below. : It contains file system information, bitmaps for valid NAT/SIT sets, orphan inode lists, and summary entries of current active segments. -- Node Address Table (NAT) - : It is composed of a block address table for all the node blocks stored in - Main area. - - Segment Information Table (SIT) : It contains segment information such as valid block count and bitmap for the validity of all the blocks. +- Node Address Table (NAT) + : It is composed of a block address table for all the node blocks stored in + Main area. + - Segment Summary Area (SSA) : It contains summary entries which contains the owner information of all the data and node blocks stored in Main area. @@ -236,13 +236,13 @@ For file system consistency, each CP points to which NAT and SIT copies are valid, as shown as below. +--------+----------+---------+ - | CP | NAT | SIT | + | CP | SIT | NAT | +--------+----------+---------+ . . . . . . . . . . . . +-------+-------+--------+--------+--------+--------+ - | CP #0 | CP #1 | NAT #0 | NAT #1 | SIT #0 | SIT #1 | + | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 | +-------+-------+--------+--------+--------+--------+ | ^ ^ | | | From 7880ceedec55fbc3997d80e68670d03395225367 Mon Sep 17 00:00:00 2001 From: Huajun Li Date: Mon, 31 Dec 2012 13:59:09 +0800 Subject: [PATCH 089/553] f2fs: update f2fs partition info about SIT/NAT layout Update partition info output under debug FS to reflect segment layout correctly. Signed-off-by: Huajun Li Signed-off-by: Jaegeuk Kim --- fs/f2fs/debug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/f2fs/debug.c b/fs/f2fs/debug.c index 0e0380a588ad..b8ed7a72c6e9 100644 --- a/fs/f2fs/debug.c +++ b/fs/f2fs/debug.c @@ -190,8 +190,8 @@ static int stat_show(struct seq_file *s, void *v) update_general_status(si->sbi); seq_printf(s, "\n=====[ partition info. #%d ]=====\n", i++); - seq_printf(s, "[SB: 1] [CP: 2] [NAT: %d] [SIT: %d] ", - si->nat_area_segs, si->sit_area_segs); + seq_printf(s, "[SB: 1] [CP: 2] [SIT: %d] [NAT: %d] ", + si->sit_area_segs, si->nat_area_segs); seq_printf(s, "[SSA: %d] [MAIN: %d", si->ssa_area_segs, si->main_area_segs); seq_printf(s, "(OverProv:%d Resv:%d)]\n\n", From d66d1f76878fcb1e78592fe8aecd13f438d6c0d7 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Thu, 3 Jan 2013 08:57:21 +0900 Subject: [PATCH 090/553] f2fs: initialize newly allocated dnode structure This patch resolves Coverity #753112. In practical, the existing code flow does not fall into the reported errorneous path. But, anyway, let's avoid this for future. Signed-off-by: Jaegeuk Kim --- fs/f2fs/f2fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 8199ee9f5875..280713289d8c 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -211,11 +211,11 @@ struct dnode_of_data { static inline void set_new_dnode(struct dnode_of_data *dn, struct inode *inode, struct page *ipage, struct page *npage, nid_t nid) { + memset(dn, 0, sizeof(*dn)); dn->inode = inode; dn->inode_page = ipage; dn->node_page = npage; dn->nid = nid; - dn->inode_page_locked = 0; } /* From c1b75eabec4eddce55ebb078f84481f58272878f Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Thu, 3 Jan 2013 09:24:28 +0900 Subject: [PATCH 091/553] f2fs: avoid null dereference in f2fs_acl_from_disk This patch resolves Coverity #751303: >>> CID 753103: Explicit null dereferenced (FORWARD_NULL) Passing null >>> pointer "value" to function "f2fs_acl_from_disk(char const *, size_t)", which dereferences it. [Error path] - value = NULL; - retval = 0 by f2fs_getxattr(); - f2fs_acl_from_disk(value:NULL, ...); Signed-off-by: Jaegeuk Kim --- fs/f2fs/acl.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/fs/f2fs/acl.c b/fs/f2fs/acl.c index e95b94945d5f..137af4255da6 100644 --- a/fs/f2fs/acl.c +++ b/fs/f2fs/acl.c @@ -191,15 +191,14 @@ struct posix_acl *f2fs_get_acl(struct inode *inode, int type) retval = f2fs_getxattr(inode, name_index, "", value, retval); } - if (retval < 0) { - if (retval == -ENODATA) - acl = NULL; - else - acl = ERR_PTR(retval); - } else { + if (retval > 0) acl = f2fs_acl_from_disk(value, retval); - } + else if (retval == -ENODATA) + acl = NULL; + else + acl = ERR_PTR(retval); kfree(value); + if (!IS_ERR(acl)) set_cached_acl(inode, type, acl); From c335a86930b4841c11df12e1fdfd8345e0ebce84 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Thu, 3 Jan 2013 09:33:20 +0900 Subject: [PATCH 092/553] f2fs: check return value during recovery This patch resolves Coverity #753102: >>> No check of the return value of "f2fs_add_link(&dent, inode)". Signed-off-by: Jaegeuk Kim --- fs/f2fs/recovery.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c index 502c63d8f096..6cc046d36815 100644 --- a/fs/f2fs/recovery.c +++ b/fs/f2fs/recovery.c @@ -67,7 +67,7 @@ static int recover_dentry(struct page *ipage, struct inode *inode) kunmap(page); f2fs_put_page(page, 0); } else { - f2fs_add_link(&dent, inode); + err = f2fs_add_link(&dent, inode); } iput(dir); out: From 0cc411b934c4317b363d1af993549f391852b980 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 4 Jan 2013 10:48:10 +0000 Subject: [PATCH 093/553] ASoC: wm2200: Remove DSP B and left justified AIF modes These are not supported. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm2200.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/sound/soc/codecs/wm2200.c b/sound/soc/codecs/wm2200.c index a12fc2fa3971..e6cefe1ac677 100644 --- a/sound/soc/codecs/wm2200.c +++ b/sound/soc/codecs/wm2200.c @@ -1566,15 +1566,9 @@ static int wm2200_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) case SND_SOC_DAIFMT_DSP_A: fmt_val = 0; break; - case SND_SOC_DAIFMT_DSP_B: - fmt_val = 1; - break; case SND_SOC_DAIFMT_I2S: fmt_val = 2; break; - case SND_SOC_DAIFMT_LEFT_J: - fmt_val = 3; - break; default: dev_err(codec->dev, "Unsupported DAI format %d\n", fmt & SND_SOC_DAIFMT_FORMAT_MASK); From d71753e22b24548911b377db28f80870cf50d07b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 4 Jan 2013 10:48:02 +0000 Subject: [PATCH 094/553] ASoC: arizona: Remove DSP B and left justified AIF modes These are not supported. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/arizona.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c index 38248a7a95e3..1d8bb5917594 100644 --- a/sound/soc/codecs/arizona.c +++ b/sound/soc/codecs/arizona.c @@ -446,15 +446,9 @@ static int arizona_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) case SND_SOC_DAIFMT_DSP_A: mode = 0; break; - case SND_SOC_DAIFMT_DSP_B: - mode = 1; - break; case SND_SOC_DAIFMT_I2S: mode = 2; break; - case SND_SOC_DAIFMT_LEFT_J: - mode = 3; - break; default: arizona_aif_err(dai, "Unsupported DAI format %d\n", fmt & SND_SOC_DAIFMT_FORMAT_MASK); From 5f960294e2031d12f10c8488c3446fecbf59628d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 4 Jan 2013 21:06:08 +0000 Subject: [PATCH 095/553] ASoC: wm5100: Remove DSP B and left justified formats These are not supported Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm5100.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c index 5a5f36936235..54397a508073 100644 --- a/sound/soc/codecs/wm5100.c +++ b/sound/soc/codecs/wm5100.c @@ -1279,15 +1279,9 @@ static int wm5100_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) case SND_SOC_DAIFMT_DSP_A: mask = 0; break; - case SND_SOC_DAIFMT_DSP_B: - mask = 1; - break; case SND_SOC_DAIFMT_I2S: mask = 2; break; - case SND_SOC_DAIFMT_LEFT_J: - mask = 3; - break; default: dev_err(codec->dev, "Unsupported DAI format %d\n", fmt & SND_SOC_DAIFMT_FORMAT_MASK); From 9c969d8ccb1e17bd20742f4ac9f00c1a64487234 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Wed, 2 Jan 2013 16:07:35 -0800 Subject: [PATCH 096/553] mwifiex: check wait_event_interruptible return value wait_event_interruptible function returns -ERESTARTSYS if it's interrupted by a signal. Driver should check the return value and handle this case properly. In mwifiex_wait_queue_complete() routine, as we are now checking wait_event_interruptible return value, the condition check is not required. Also, we have removed mwifiex_cancel_pending_ioctl() call to avoid a chance of sending second command to FW by other path as soon as we clear current command node. FW can not handle two commands simultaneously. Cc: "3.6+" Signed-off-by: Bing Zhao Signed-off-by: Amitkumar Karwar Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/sta_ioctl.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index cb682561c438..60e88b58039d 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -56,7 +56,6 @@ int mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist, */ int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter) { - bool cancel_flag = false; int status; struct cmd_ctrl_node *cmd_queued; @@ -70,14 +69,11 @@ int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter) atomic_inc(&adapter->cmd_pending); /* Wait for completion */ - wait_event_interruptible(adapter->cmd_wait_q.wait, - *(cmd_queued->condition)); - if (!*(cmd_queued->condition)) - cancel_flag = true; - - if (cancel_flag) { - mwifiex_cancel_pending_ioctl(adapter); - dev_dbg(adapter->dev, "cmd cancel\n"); + status = wait_event_interruptible(adapter->cmd_wait_q.wait, + *(cmd_queued->condition)); + if (status) { + dev_err(adapter->dev, "cmd_wait_q terminated: %d\n", status); + return status; } status = adapter->cmd_wait_q.status; @@ -496,8 +492,11 @@ int mwifiex_enable_hs(struct mwifiex_adapter *adapter) return false; } - wait_event_interruptible(adapter->hs_activate_wait_q, - adapter->hs_activate_wait_q_woken); + if (wait_event_interruptible(adapter->hs_activate_wait_q, + adapter->hs_activate_wait_q_woken)) { + dev_err(adapter->dev, "hs_activate_wait_q terminated\n"); + return false; + } return true; } From c3ff0b2dff5b6c63f2deda8f934c0a21fb74850d Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Wed, 2 Jan 2013 17:32:19 -0800 Subject: [PATCH 097/553] mwifiex: fix typo in setting up ibss network parameters commit 683b6d3... "cfg80211: pass a channel definition struct" accidentally changed "==" to "!=". Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index a875499f8945..efe525be27dd 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1709,7 +1709,7 @@ static int mwifiex_set_ibss_params(struct mwifiex_private *priv, NL80211_CHAN_NO_HT) config_bands |= BAND_GN; } else { - if (cfg80211_get_chandef_type(¶ms->chandef) != + if (cfg80211_get_chandef_type(¶ms->chandef) == NL80211_CHAN_NO_HT) config_bands = BAND_A; else From 2be7d22f062535de59babdb4b5e9de9ff31e817e Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Thu, 20 Dec 2012 13:13:19 -0800 Subject: [PATCH 098/553] wireless: add new wil6210 802.11ad 60GHz driver This adds support for the 60 GHz 802.11ad Wilocity card through a new driver, wil6210. Wilocity implemented the firmware, QCA maintains the device driver. Currently supported: - STA: with security - AP: limited to 1 connected STA, security disabled - Monitor: due to a hardware/firmware limitation either control or non-control frames are monitored Using a STA and AP with this drive, one can assemble a fully functional BSS. Throughput of 1.2Gbps is achieved with iperf. The wil6210 cards have on-board flash memory for the firmware, the cards comes pre-flashed and no firmware download is required. For more details see: http://wireless.kernel.org/en/users/Drivers/wil6210 Signed-off-by: Vladimir Kondratiev Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- MAINTAINERS | 8 + drivers/net/wireless/ath/Kconfig | 1 + drivers/net/wireless/ath/Makefile | 1 + drivers/net/wireless/ath/wil6210/Kconfig | 29 + drivers/net/wireless/ath/wil6210/Makefile | 13 + drivers/net/wireless/ath/wil6210/cfg80211.c | 573 +++++++++ .../net/wireless/ath/wil6210/dbg_hexdump.h | 30 + drivers/net/wireless/ath/wil6210/debugfs.c | 603 +++++++++ drivers/net/wireless/ath/wil6210/interrupt.c | 471 +++++++ drivers/net/wireless/ath/wil6210/main.c | 407 ++++++ drivers/net/wireless/ath/wil6210/netdev.c | 157 +++ drivers/net/wireless/ath/wil6210/pcie_bus.c | 223 ++++ drivers/net/wireless/ath/wil6210/txrx.c | 871 +++++++++++++ drivers/net/wireless/ath/wil6210/txrx.h | 362 ++++++ drivers/net/wireless/ath/wil6210/wil6210.h | 363 ++++++ drivers/net/wireless/ath/wil6210/wmi.c | 975 ++++++++++++++ drivers/net/wireless/ath/wil6210/wmi.h | 1116 +++++++++++++++++ 17 files changed, 6203 insertions(+) create mode 100644 drivers/net/wireless/ath/wil6210/Kconfig create mode 100644 drivers/net/wireless/ath/wil6210/Makefile create mode 100644 drivers/net/wireless/ath/wil6210/cfg80211.c create mode 100644 drivers/net/wireless/ath/wil6210/dbg_hexdump.h create mode 100644 drivers/net/wireless/ath/wil6210/debugfs.c create mode 100644 drivers/net/wireless/ath/wil6210/interrupt.c create mode 100644 drivers/net/wireless/ath/wil6210/main.c create mode 100644 drivers/net/wireless/ath/wil6210/netdev.c create mode 100644 drivers/net/wireless/ath/wil6210/pcie_bus.c create mode 100644 drivers/net/wireless/ath/wil6210/txrx.c create mode 100644 drivers/net/wireless/ath/wil6210/txrx.h create mode 100644 drivers/net/wireless/ath/wil6210/wil6210.h create mode 100644 drivers/net/wireless/ath/wil6210/wmi.c create mode 100644 drivers/net/wireless/ath/wil6210/wmi.h diff --git a/MAINTAINERS b/MAINTAINERS index 4e2a1f67a1fc..16c3506da16c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1353,6 +1353,14 @@ W: http://wireless.kernel.org/en/users/Drivers/ath9k S: Supported F: drivers/net/wireless/ath/ath9k/ +WILOCITY WIL6210 WIRELESS DRIVER +M: Vladimir Kondratiev +L: linux-wireless@vger.kernel.org +L: wil6210@qca.qualcomm.com +S: Supported +W: http://wireless.kernel.org/en/users/Drivers/wil6210 +F: drivers/net/wireless/ath/wil6210/ + CARL9170 LINUX COMMUNITY WIRELESS DRIVER M: Christian Lamparter L: linux-wireless@vger.kernel.org diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig index 1a67a4f829fe..2c02b4e84094 100644 --- a/drivers/net/wireless/ath/Kconfig +++ b/drivers/net/wireless/ath/Kconfig @@ -30,5 +30,6 @@ source "drivers/net/wireless/ath/ath9k/Kconfig" source "drivers/net/wireless/ath/carl9170/Kconfig" source "drivers/net/wireless/ath/ath6kl/Kconfig" source "drivers/net/wireless/ath/ar5523/Kconfig" +source "drivers/net/wireless/ath/wil6210/Kconfig" endif diff --git a/drivers/net/wireless/ath/Makefile b/drivers/net/wireless/ath/Makefile index 1e18621326dc..97b964ded2be 100644 --- a/drivers/net/wireless/ath/Makefile +++ b/drivers/net/wireless/ath/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_ATH9K_HW) += ath9k/ obj-$(CONFIG_CARL9170) += carl9170/ obj-$(CONFIG_ATH6KL) += ath6kl/ obj-$(CONFIG_AR5523) += ar5523/ +obj-$(CONFIG_WIL6210) += wil6210/ obj-$(CONFIG_ATH_COMMON) += ath.o diff --git a/drivers/net/wireless/ath/wil6210/Kconfig b/drivers/net/wireless/ath/wil6210/Kconfig new file mode 100644 index 000000000000..bac3d98a0cfb --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/Kconfig @@ -0,0 +1,29 @@ +config WIL6210 + tristate "Wilocity 60g WiFi card wil6210 support" + depends on CFG80211 + depends on PCI + default n + ---help--- + This module adds support for wireless adapter based on + wil6210 chip by Wilocity. It supports operation on the + 60 GHz band, covered by the IEEE802.11ad standard. + + http://wireless.kernel.org/en/users/Drivers/wil6210 + + If you choose to build it as a module, it will be called + wil6210 + +config WIL6210_ISR_COR + bool "Use Clear-On-Read mode for ISR registers for wil6210" + depends on WIL6210 + default y + ---help--- + ISR registers on wil6210 chip may operate in either + COR (Clear-On-Read) or W1C (Write-1-to-Clear) mode. + For production code, use COR (say y); is default since + it saves extra target transaction; + For ISR debug, use W1C (say n); is allows to monitor ISR + registers with debugfs. If COR were used, ISR would + self-clear when accessed for debug purposes, it makes + such monitoring impossible. + Say y unless you debug interrupts diff --git a/drivers/net/wireless/ath/wil6210/Makefile b/drivers/net/wireless/ath/wil6210/Makefile new file mode 100644 index 000000000000..9396dc9fe3c5 --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/Makefile @@ -0,0 +1,13 @@ +obj-$(CONFIG_WIL6210) += wil6210.o + +wil6210-objs := main.o +wil6210-objs += netdev.o +wil6210-objs += cfg80211.o +wil6210-objs += pcie_bus.o +wil6210-objs += debugfs.o +wil6210-objs += wmi.o +wil6210-objs += interrupt.o +wil6210-objs += txrx.o + +subdir-ccflags-y += -Werror +subdir-ccflags-y += -D__CHECK_ENDIAN__ diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c new file mode 100644 index 000000000000..116f4e807ae1 --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/cfg80211.c @@ -0,0 +1,573 @@ +/* + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "wil6210.h" +#include "wmi.h" + +#define CHAN60G(_channel, _flags) { \ + .band = IEEE80211_BAND_60GHZ, \ + .center_freq = 56160 + (2160 * (_channel)), \ + .hw_value = (_channel), \ + .flags = (_flags), \ + .max_antenna_gain = 0, \ + .max_power = 40, \ +} + +static struct ieee80211_channel wil_60ghz_channels[] = { + CHAN60G(1, 0), + CHAN60G(2, 0), + CHAN60G(3, 0), +/* channel 4 not supported yet */ +}; + +static struct ieee80211_supported_band wil_band_60ghz = { + .channels = wil_60ghz_channels, + .n_channels = ARRAY_SIZE(wil_60ghz_channels), + .ht_cap = { + .ht_supported = true, + .cap = 0, /* TODO */ + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K, /* TODO */ + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, /* TODO */ + .mcs = { + /* MCS 1..12 - SC PHY */ + .rx_mask = {0xfe, 0x1f}, /* 1..12 */ + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, /* TODO */ + }, + }, +}; + +static const struct ieee80211_txrx_stypes +wil_mgmt_stypes[NUM_NL80211_IFTYPES] = { + [NL80211_IFTYPE_STATION] = { + .tx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_RESP >> 4), + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) + }, + [NL80211_IFTYPE_AP] = { + .tx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_RESP >> 4), + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) + }, + [NL80211_IFTYPE_P2P_CLIENT] = { + .tx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_RESP >> 4), + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) + }, + [NL80211_IFTYPE_P2P_GO] = { + .tx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_RESP >> 4), + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) + }, +}; + +static const u32 wil_cipher_suites[] = { + WLAN_CIPHER_SUITE_GCMP, +}; + +int wil_iftype_nl2wmi(enum nl80211_iftype type) +{ + static const struct { + enum nl80211_iftype nl; + enum wmi_network_type wmi; + } __nl2wmi[] = { + {NL80211_IFTYPE_ADHOC, WMI_NETTYPE_ADHOC}, + {NL80211_IFTYPE_STATION, WMI_NETTYPE_INFRA}, + {NL80211_IFTYPE_AP, WMI_NETTYPE_AP}, + {NL80211_IFTYPE_P2P_CLIENT, WMI_NETTYPE_P2P}, + {NL80211_IFTYPE_P2P_GO, WMI_NETTYPE_P2P}, + {NL80211_IFTYPE_MONITOR, WMI_NETTYPE_ADHOC}, /* FIXME */ + }; + uint i; + + for (i = 0; i < ARRAY_SIZE(__nl2wmi); i++) { + if (__nl2wmi[i].nl == type) + return __nl2wmi[i].wmi; + } + + return -EOPNOTSUPP; +} + +static int wil_cfg80211_get_station(struct wiphy *wiphy, + struct net_device *ndev, + u8 *mac, struct station_info *sinfo) +{ + struct wil6210_priv *wil = wiphy_to_wil(wiphy); + int rc; + struct wmi_notify_req_cmd cmd = { + .cid = 0, + .interval_usec = 0, + }; + + if (memcmp(mac, wil->dst_addr[0], ETH_ALEN)) + return -ENOENT; + + /* WMI_NOTIFY_REQ_DONE_EVENTID handler fills wil->stats.bf_mcs */ + rc = wmi_call(wil, WMI_NOTIFY_REQ_CMDID, &cmd, sizeof(cmd), + WMI_NOTIFY_REQ_DONE_EVENTID, NULL, 0, 20); + if (rc) + return rc; + + sinfo->generation = wil->sinfo_gen; + + sinfo->filled |= STATION_INFO_TX_BITRATE; + sinfo->txrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G; + sinfo->txrate.mcs = wil->stats.bf_mcs; + sinfo->filled |= STATION_INFO_RX_BITRATE; + sinfo->rxrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G; + sinfo->rxrate.mcs = wil->stats.last_mcs_rx; + + if (test_bit(wil_status_fwconnected, &wil->status)) { + sinfo->filled |= STATION_INFO_SIGNAL; + sinfo->signal = 12; /* TODO: provide real value */ + } + + return 0; +} + +static int wil_cfg80211_change_iface(struct wiphy *wiphy, + struct net_device *ndev, + enum nl80211_iftype type, u32 *flags, + struct vif_params *params) +{ + struct wil6210_priv *wil = wiphy_to_wil(wiphy); + struct wireless_dev *wdev = wil->wdev; + + switch (type) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_P2P_CLIENT: + case NL80211_IFTYPE_P2P_GO: + break; + case NL80211_IFTYPE_MONITOR: + if (flags) + wil->monitor_flags = *flags; + else + wil->monitor_flags = 0; + + break; + default: + return -EOPNOTSUPP; + } + + wdev->iftype = type; + + return 0; +} + +static int wil_cfg80211_scan(struct wiphy *wiphy, + struct cfg80211_scan_request *request) +{ + struct wil6210_priv *wil = wiphy_to_wil(wiphy); + struct wireless_dev *wdev = wil->wdev; + struct { + struct wmi_start_scan_cmd cmd; + u16 chnl[4]; + } __packed cmd; + uint i, n; + + if (wil->scan_request) { + wil_err(wil, "Already scanning\n"); + return -EAGAIN; + } + + /* check we are client side */ + switch (wdev->iftype) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_P2P_CLIENT: + break; + default: + return -EOPNOTSUPP; + + } + + /* FW don't support scan after connection attempt */ + if (test_bit(wil_status_dontscan, &wil->status)) { + wil_err(wil, "Scan after connect attempt not supported\n"); + return -EBUSY; + } + + wil->scan_request = request; + + memset(&cmd, 0, sizeof(cmd)); + cmd.cmd.num_channels = 0; + n = min(request->n_channels, 4U); + for (i = 0; i < n; i++) { + int ch = request->channels[i]->hw_value; + if (ch == 0) { + wil_err(wil, + "Scan requested for unknown frequency %dMhz\n", + request->channels[i]->center_freq); + continue; + } + /* 0-based channel indexes */ + cmd.cmd.channel_list[cmd.cmd.num_channels++].channel = ch - 1; + wil_dbg(wil, "Scan for ch %d : %d MHz\n", ch, + request->channels[i]->center_freq); + } + + return wmi_send(wil, WMI_START_SCAN_CMDID, &cmd, sizeof(cmd.cmd) + + cmd.cmd.num_channels * sizeof(cmd.cmd.channel_list[0])); +} + +static int wil_cfg80211_connect(struct wiphy *wiphy, + struct net_device *ndev, + struct cfg80211_connect_params *sme) +{ + struct wil6210_priv *wil = wiphy_to_wil(wiphy); + struct cfg80211_bss *bss; + struct wmi_connect_cmd conn; + const u8 *ssid_eid; + const u8 *rsn_eid; + int ch; + int rc = 0; + + bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid, + sme->ssid, sme->ssid_len, + WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS); + if (!bss) { + wil_err(wil, "Unable to find BSS\n"); + return -ENOENT; + } + + ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID); + if (!ssid_eid) { + wil_err(wil, "No SSID\n"); + rc = -ENOENT; + goto out; + } + + rsn_eid = sme->ie ? + cfg80211_find_ie(WLAN_EID_RSN, sme->ie, sme->ie_len) : + NULL; + if (rsn_eid) { + if (sme->ie_len > WMI_MAX_IE_LEN) { + rc = -ERANGE; + wil_err(wil, "IE too large (%td bytes)\n", + sme->ie_len); + goto out; + } + /* + * For secure assoc, send: + * (1) WMI_DELETE_CIPHER_KEY_CMD + * (2) WMI_SET_APPIE_CMD + */ + rc = wmi_del_cipher_key(wil, 0, bss->bssid); + if (rc) { + wil_err(wil, "WMI_DELETE_CIPHER_KEY_CMD failed\n"); + goto out; + } + /* WMI_SET_APPIE_CMD */ + rc = wmi_set_ie(wil, WMI_FRAME_ASSOC_REQ, sme->ie_len, sme->ie); + if (rc) { + wil_err(wil, "WMI_SET_APPIE_CMD failed\n"); + goto out; + } + } + + /* WMI_CONNECT_CMD */ + memset(&conn, 0, sizeof(conn)); + switch (bss->capability & 0x03) { + case WLAN_CAPABILITY_DMG_TYPE_AP: + conn.network_type = WMI_NETTYPE_INFRA; + break; + case WLAN_CAPABILITY_DMG_TYPE_PBSS: + conn.network_type = WMI_NETTYPE_P2P; + break; + default: + wil_err(wil, "Unsupported BSS type, capability= 0x%04x\n", + bss->capability); + goto out; + } + if (rsn_eid) { + conn.dot11_auth_mode = WMI_AUTH11_SHARED; + conn.auth_mode = WMI_AUTH_WPA2_PSK; + conn.pairwise_crypto_type = WMI_CRYPT_AES_GCMP; + conn.pairwise_crypto_len = 16; + } else { + conn.dot11_auth_mode = WMI_AUTH11_OPEN; + conn.auth_mode = WMI_AUTH_NONE; + } + + conn.ssid_len = min_t(u8, ssid_eid[1], 32); + memcpy(conn.ssid, ssid_eid+2, conn.ssid_len); + + ch = bss->channel->hw_value; + if (ch == 0) { + wil_err(wil, "BSS at unknown frequency %dMhz\n", + bss->channel->center_freq); + rc = -EOPNOTSUPP; + goto out; + } + conn.channel = ch - 1; + + memcpy(conn.bssid, bss->bssid, 6); + memcpy(conn.dst_mac, bss->bssid, 6); + /* + * FW don't support scan after connection attempt + */ + set_bit(wil_status_dontscan, &wil->status); + + rc = wmi_send(wil, WMI_CONNECT_CMDID, &conn, sizeof(conn)); + if (rc == 0) { + /* Connect can take lots of time */ + mod_timer(&wil->connect_timer, + jiffies + msecs_to_jiffies(2000)); + } + + out: + cfg80211_put_bss(bss); + + return rc; +} + +static int wil_cfg80211_disconnect(struct wiphy *wiphy, + struct net_device *ndev, + u16 reason_code) +{ + int rc; + struct wil6210_priv *wil = wiphy_to_wil(wiphy); + + rc = wmi_send(wil, WMI_DISCONNECT_CMDID, NULL, 0); + + return rc; +} + +static int wil_cfg80211_set_channel(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef) +{ + struct wil6210_priv *wil = wiphy_to_wil(wiphy); + struct wireless_dev *wdev = wil->wdev; + + wdev->preset_chandef = *chandef; + + return 0; +} + +static int wil_cfg80211_add_key(struct wiphy *wiphy, + struct net_device *ndev, + u8 key_index, bool pairwise, + const u8 *mac_addr, + struct key_params *params) +{ + struct wil6210_priv *wil = wiphy_to_wil(wiphy); + + /* group key is not used */ + if (!pairwise) + return 0; + + return wmi_add_cipher_key(wil, key_index, mac_addr, + params->key_len, params->key); +} + +static int wil_cfg80211_del_key(struct wiphy *wiphy, + struct net_device *ndev, + u8 key_index, bool pairwise, + const u8 *mac_addr) +{ + struct wil6210_priv *wil = wiphy_to_wil(wiphy); + + /* group key is not used */ + if (!pairwise) + return 0; + + return wmi_del_cipher_key(wil, key_index, mac_addr); +} + +/* Need to be present or wiphy_new() will WARN */ +static int wil_cfg80211_set_default_key(struct wiphy *wiphy, + struct net_device *ndev, + u8 key_index, bool unicast, + bool multicast) +{ + return 0; +} + +static int wil_cfg80211_start_ap(struct wiphy *wiphy, + struct net_device *ndev, + struct cfg80211_ap_settings *info) +{ + int rc = 0; + struct wil6210_priv *wil = wiphy_to_wil(wiphy); + struct wireless_dev *wdev = ndev->ieee80211_ptr; + struct ieee80211_channel *channel = info->chandef.chan; + struct cfg80211_beacon_data *bcon = &info->beacon; + u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype); + + if (!channel) { + wil_err(wil, "AP: No channel???\n"); + return -EINVAL; + } + + wil_dbg(wil, "AP on Channel %d %d MHz, %s\n", channel->hw_value, + channel->center_freq, info->privacy ? "secure" : "open"); + print_hex_dump_bytes("SSID ", DUMP_PREFIX_OFFSET, + info->ssid, info->ssid_len); + + rc = wil_reset(wil); + if (rc) + return rc; + + rc = wmi_set_ssid(wil, info->ssid_len, info->ssid); + if (rc) + return rc; + + rc = wmi_set_channel(wil, channel->hw_value); + if (rc) + return rc; + + /* MAC address - pre-requisite for other commands */ + wmi_set_mac_address(wil, ndev->dev_addr); + + /* IE's */ + /* bcon 'head IE's are not relevant for 60g band */ + wmi_set_ie(wil, WMI_FRAME_BEACON, bcon->beacon_ies_len, + bcon->beacon_ies); + wmi_set_ie(wil, WMI_FRAME_PROBE_RESP, bcon->proberesp_ies_len, + bcon->proberesp_ies); + wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP, bcon->assocresp_ies_len, + bcon->assocresp_ies); + + wil->secure_pcp = info->privacy; + + rc = wmi_set_bcon(wil, info->beacon_interval, wmi_nettype); + if (rc) + return rc; + + /* Rx VRING. After MAC and beacon */ + rc = wil_rx_init(wil); + + netif_carrier_on(ndev); + + return rc; +} + +static int wil_cfg80211_stop_ap(struct wiphy *wiphy, + struct net_device *ndev) +{ + int rc = 0; + struct wil6210_priv *wil = wiphy_to_wil(wiphy); + struct wireless_dev *wdev = ndev->ieee80211_ptr; + u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype); + + /* To stop beaconing, set BI to 0 */ + rc = wmi_set_bcon(wil, 0, wmi_nettype); + + return rc; +} + +static struct cfg80211_ops wil_cfg80211_ops = { + .scan = wil_cfg80211_scan, + .connect = wil_cfg80211_connect, + .disconnect = wil_cfg80211_disconnect, + .change_virtual_intf = wil_cfg80211_change_iface, + .get_station = wil_cfg80211_get_station, + .set_monitor_channel = wil_cfg80211_set_channel, + .add_key = wil_cfg80211_add_key, + .del_key = wil_cfg80211_del_key, + .set_default_key = wil_cfg80211_set_default_key, + /* AP mode */ + .start_ap = wil_cfg80211_start_ap, + .stop_ap = wil_cfg80211_stop_ap, +}; + +static void wil_wiphy_init(struct wiphy *wiphy) +{ + /* TODO: set real value */ + wiphy->max_scan_ssids = 10; + wiphy->max_num_pmkids = 0 /* TODO: */; + wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_MONITOR); + /* TODO: enable P2P when integrated with supplicant: + * BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO) + */ + wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME | + WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD; + dev_warn(wiphy_dev(wiphy), "%s : flags = 0x%08x\n", + __func__, wiphy->flags); + wiphy->probe_resp_offload = + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS | + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 | + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P; + + wiphy->bands[IEEE80211_BAND_60GHZ] = &wil_band_60ghz; + + /* TODO: figure this out */ + wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; + + wiphy->cipher_suites = wil_cipher_suites; + wiphy->n_cipher_suites = ARRAY_SIZE(wil_cipher_suites); + wiphy->mgmt_stypes = wil_mgmt_stypes; +} + +struct wireless_dev *wil_cfg80211_init(struct device *dev) +{ + int rc = 0; + struct wireless_dev *wdev; + + wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); + if (!wdev) + return ERR_PTR(-ENOMEM); + + wdev->wiphy = wiphy_new(&wil_cfg80211_ops, + sizeof(struct wil6210_priv)); + if (!wdev->wiphy) { + rc = -ENOMEM; + goto out; + } + + set_wiphy_dev(wdev->wiphy, dev); + wil_wiphy_init(wdev->wiphy); + + rc = wiphy_register(wdev->wiphy); + if (rc < 0) + goto out_failed_reg; + + return wdev; + +out_failed_reg: + wiphy_free(wdev->wiphy); +out: + kfree(wdev); + + return ERR_PTR(rc); +} + +void wil_wdev_free(struct wil6210_priv *wil) +{ + struct wireless_dev *wdev = wil_to_wdev(wil); + + if (!wdev) + return; + + wiphy_unregister(wdev->wiphy); + wiphy_free(wdev->wiphy); + kfree(wdev); +} diff --git a/drivers/net/wireless/ath/wil6210/dbg_hexdump.h b/drivers/net/wireless/ath/wil6210/dbg_hexdump.h new file mode 100644 index 000000000000..6a315ba5aa7d --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/dbg_hexdump.h @@ -0,0 +1,30 @@ +#ifndef WIL_DBG_HEXDUMP_H_ +#define WIL_DBG_HEXDUMP_H_ + +#if defined(CONFIG_DYNAMIC_DEBUG) +#define wil_dynamic_hex_dump(prefix_str, prefix_type, rowsize, \ + groupsize, buf, len, ascii) \ +do { \ + DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, \ + __builtin_constant_p(prefix_str) ? prefix_str : "hexdump");\ + if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT)) \ + print_hex_dump(KERN_DEBUG, prefix_str, \ + prefix_type, rowsize, groupsize, \ + buf, len, ascii); \ +} while (0) + +#define wil_print_hex_dump_debug(prefix_str, prefix_type, rowsize, \ + groupsize, buf, len, ascii) \ + wil_dynamic_hex_dump(prefix_str, prefix_type, rowsize, \ + groupsize, buf, len, ascii) + +#define print_hex_dump_bytes(prefix_str, prefix_type, buf, len) \ + wil_dynamic_hex_dump(prefix_str, prefix_type, 16, 1, buf, len, true) +#else /* defined(CONFIG_DYNAMIC_DEBUG) */ +#define wil_print_hex_dump_debug(prefix_str, prefix_type, rowsize, \ + groupsize, buf, len, ascii) \ + print_hex_dump(KERN_DEBUG, prefix_str, prefix_type, rowsize, \ + groupsize, buf, len, ascii) +#endif /* defined(CONFIG_DYNAMIC_DEBUG) */ + +#endif /* WIL_DBG_HEXDUMP_H_ */ diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c new file mode 100644 index 000000000000..65fc9683bfd8 --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/debugfs.c @@ -0,0 +1,603 @@ +/* + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include +#include +#include +#include + +#include "wil6210.h" +#include "txrx.h" + +/* Nasty hack. Better have per device instances */ +static u32 mem_addr; +static u32 dbg_txdesc_index; + +static void wil_print_vring(struct seq_file *s, struct wil6210_priv *wil, + const char *name, struct vring *vring) +{ + void __iomem *x = wmi_addr(wil, vring->hwtail); + + seq_printf(s, "VRING %s = {\n", name); + seq_printf(s, " pa = 0x%016llx\n", (unsigned long long)vring->pa); + seq_printf(s, " va = 0x%p\n", vring->va); + seq_printf(s, " size = %d\n", vring->size); + seq_printf(s, " swtail = %d\n", vring->swtail); + seq_printf(s, " swhead = %d\n", vring->swhead); + seq_printf(s, " hwtail = [0x%08x] -> ", vring->hwtail); + if (x) + seq_printf(s, "0x%08x\n", ioread32(x)); + else + seq_printf(s, "???\n"); + + if (vring->va && (vring->size < 1025)) { + uint i; + for (i = 0; i < vring->size; i++) { + volatile struct vring_tx_desc *d = &vring->va[i].tx; + if ((i % 64) == 0 && (i != 0)) + seq_printf(s, "\n"); + seq_printf(s, "%s", (d->dma.status & BIT(0)) ? + "S" : (vring->ctx[i] ? "H" : "h")); + } + seq_printf(s, "\n"); + } + seq_printf(s, "}\n"); +} + +static int wil_vring_debugfs_show(struct seq_file *s, void *data) +{ + uint i; + struct wil6210_priv *wil = s->private; + + wil_print_vring(s, wil, "rx", &wil->vring_rx); + + for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) { + struct vring *vring = &(wil->vring_tx[i]); + if (vring->va) { + char name[10]; + snprintf(name, sizeof(name), "tx_%2d", i); + wil_print_vring(s, wil, name, vring); + } + } + + return 0; +} + +static int wil_vring_seq_open(struct inode *inode, struct file *file) +{ + return single_open(file, wil_vring_debugfs_show, inode->i_private); +} + +static const struct file_operations fops_vring = { + .open = wil_vring_seq_open, + .release = single_release, + .read = seq_read, + .llseek = seq_lseek, +}; + +static void wil_print_ring(struct seq_file *s, const char *prefix, + void __iomem *off) +{ + struct wil6210_priv *wil = s->private; + struct wil6210_mbox_ring r; + int rsize; + uint i; + + wil_memcpy_fromio_32(&r, off, sizeof(r)); + wil_mbox_ring_le2cpus(&r); + /* + * we just read memory block from NIC. This memory may be + * garbage. Check validity before using it. + */ + rsize = r.size / sizeof(struct wil6210_mbox_ring_desc); + + seq_printf(s, "ring %s = {\n", prefix); + seq_printf(s, " base = 0x%08x\n", r.base); + seq_printf(s, " size = 0x%04x bytes -> %d entries\n", r.size, rsize); + seq_printf(s, " tail = 0x%08x\n", r.tail); + seq_printf(s, " head = 0x%08x\n", r.head); + seq_printf(s, " entry size = %d\n", r.entry_size); + + if (r.size % sizeof(struct wil6210_mbox_ring_desc)) { + seq_printf(s, " ??? size is not multiple of %zd, garbage?\n", + sizeof(struct wil6210_mbox_ring_desc)); + goto out; + } + + if (!wmi_addr(wil, r.base) || + !wmi_addr(wil, r.tail) || + !wmi_addr(wil, r.head)) { + seq_printf(s, " ??? pointers are garbage?\n"); + goto out; + } + + for (i = 0; i < rsize; i++) { + struct wil6210_mbox_ring_desc d; + struct wil6210_mbox_hdr hdr; + size_t delta = i * sizeof(d); + void __iomem *x = wil->csr + HOSTADDR(r.base) + delta; + + wil_memcpy_fromio_32(&d, x, sizeof(d)); + + seq_printf(s, " [%2x] %s %s%s 0x%08x", i, + d.sync ? "F" : "E", + (r.tail - r.base == delta) ? "t" : " ", + (r.head - r.base == delta) ? "h" : " ", + le32_to_cpu(d.addr)); + if (0 == wmi_read_hdr(wil, d.addr, &hdr)) { + u16 len = le16_to_cpu(hdr.len); + seq_printf(s, " -> %04x %04x %04x %02x\n", + le16_to_cpu(hdr.seq), len, + le16_to_cpu(hdr.type), hdr.flags); + if (len <= MAX_MBOXITEM_SIZE) { + int n = 0; + unsigned char printbuf[16 * 3 + 2]; + unsigned char databuf[MAX_MBOXITEM_SIZE]; + void __iomem *src = wmi_buffer(wil, d.addr) + + sizeof(struct wil6210_mbox_hdr); + /* + * No need to check @src for validity - + * we already validated @d.addr while + * reading header + */ + wil_memcpy_fromio_32(databuf, src, len); + while (n < len) { + int l = min(len - n, 16); + hex_dump_to_buffer(databuf + n, l, + 16, 1, printbuf, + sizeof(printbuf), + false); + seq_printf(s, " : %s\n", printbuf); + n += l; + } + } + } else { + seq_printf(s, "\n"); + } + } + out: + seq_printf(s, "}\n"); +} + +static int wil_mbox_debugfs_show(struct seq_file *s, void *data) +{ + struct wil6210_priv *wil = s->private; + + wil_print_ring(s, "tx", wil->csr + HOST_MBOX + + offsetof(struct wil6210_mbox_ctl, tx)); + wil_print_ring(s, "rx", wil->csr + HOST_MBOX + + offsetof(struct wil6210_mbox_ctl, rx)); + + return 0; +} + +static int wil_mbox_seq_open(struct inode *inode, struct file *file) +{ + return single_open(file, wil_mbox_debugfs_show, inode->i_private); +} + +static const struct file_operations fops_mbox = { + .open = wil_mbox_seq_open, + .release = single_release, + .read = seq_read, + .llseek = seq_lseek, +}; + +static int wil_debugfs_iomem_x32_set(void *data, u64 val) +{ + iowrite32(val, (void __iomem *)data); + wmb(); /* make sure write propagated to HW */ + + return 0; +} + +static int wil_debugfs_iomem_x32_get(void *data, u64 *val) +{ + *val = ioread32((void __iomem *)data); + + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(fops_iomem_x32, wil_debugfs_iomem_x32_get, + wil_debugfs_iomem_x32_set, "0x%08llx\n"); + +static struct dentry *wil_debugfs_create_iomem_x32(const char *name, + mode_t mode, + struct dentry *parent, + void __iomem *value) +{ + return debugfs_create_file(name, mode, parent, (void * __force)value, + &fops_iomem_x32); +} + +static int wil6210_debugfs_create_ISR(struct wil6210_priv *wil, + const char *name, + struct dentry *parent, u32 off) +{ + struct dentry *d = debugfs_create_dir(name, parent); + + if (IS_ERR_OR_NULL(d)) + return -ENODEV; + + wil_debugfs_create_iomem_x32("ICC", S_IRUGO | S_IWUSR, d, + wil->csr + off); + wil_debugfs_create_iomem_x32("ICR", S_IRUGO | S_IWUSR, d, + wil->csr + off + 4); + wil_debugfs_create_iomem_x32("ICM", S_IRUGO | S_IWUSR, d, + wil->csr + off + 8); + wil_debugfs_create_iomem_x32("ICS", S_IWUSR, d, + wil->csr + off + 12); + wil_debugfs_create_iomem_x32("IMV", S_IRUGO | S_IWUSR, d, + wil->csr + off + 16); + wil_debugfs_create_iomem_x32("IMS", S_IWUSR, d, + wil->csr + off + 20); + wil_debugfs_create_iomem_x32("IMC", S_IWUSR, d, + wil->csr + off + 24); + + return 0; +} + +static int wil6210_debugfs_create_pseudo_ISR(struct wil6210_priv *wil, + struct dentry *parent) +{ + struct dentry *d = debugfs_create_dir("PSEUDO_ISR", parent); + + if (IS_ERR_OR_NULL(d)) + return -ENODEV; + + wil_debugfs_create_iomem_x32("CAUSE", S_IRUGO, d, wil->csr + + HOSTADDR(RGF_DMA_PSEUDO_CAUSE)); + wil_debugfs_create_iomem_x32("MASK_SW", S_IRUGO, d, wil->csr + + HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW)); + wil_debugfs_create_iomem_x32("MASK_FW", S_IRUGO, d, wil->csr + + HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_FW)); + + return 0; +} + +static int wil6210_debugfs_create_ITR_CNT(struct wil6210_priv *wil, + struct dentry *parent) +{ + struct dentry *d = debugfs_create_dir("ITR_CNT", parent); + + if (IS_ERR_OR_NULL(d)) + return -ENODEV; + + wil_debugfs_create_iomem_x32("TRSH", S_IRUGO, d, wil->csr + + HOSTADDR(RGF_DMA_ITR_CNT_TRSH)); + wil_debugfs_create_iomem_x32("DATA", S_IRUGO, d, wil->csr + + HOSTADDR(RGF_DMA_ITR_CNT_DATA)); + wil_debugfs_create_iomem_x32("CTL", S_IRUGO, d, wil->csr + + HOSTADDR(RGF_DMA_ITR_CNT_CRL)); + + return 0; +} + +static int wil_memread_debugfs_show(struct seq_file *s, void *data) +{ + struct wil6210_priv *wil = s->private; + void __iomem *a = wmi_buffer(wil, cpu_to_le32(mem_addr)); + + if (a) + seq_printf(s, "[0x%08x] = 0x%08x\n", mem_addr, ioread32(a)); + else + seq_printf(s, "[0x%08x] = INVALID\n", mem_addr); + + return 0; +} + +static int wil_memread_seq_open(struct inode *inode, struct file *file) +{ + return single_open(file, wil_memread_debugfs_show, inode->i_private); +} + +static const struct file_operations fops_memread = { + .open = wil_memread_seq_open, + .release = single_release, + .read = seq_read, + .llseek = seq_lseek, +}; + +static int wil_default_open(struct inode *inode, struct file *file) +{ + if (inode->i_private) + file->private_data = inode->i_private; + + return 0; +} + +static ssize_t wil_read_file_ioblob(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + enum { max_count = 4096 }; + struct debugfs_blob_wrapper *blob = file->private_data; + loff_t pos = *ppos; + size_t available = blob->size; + void *buf; + size_t ret; + + if (pos < 0) + return -EINVAL; + + if (pos >= available || !count) + return 0; + + if (count > available - pos) + count = available - pos; + if (count > max_count) + count = max_count; + + buf = kmalloc(count, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + wil_memcpy_fromio_32(buf, (const volatile void __iomem *)blob->data + + pos, count); + + ret = copy_to_user(user_buf, buf, count); + kfree(buf); + if (ret == count) + return -EFAULT; + + count -= ret; + *ppos = pos + count; + + return count; +} + +static const struct file_operations fops_ioblob = { + .read = wil_read_file_ioblob, + .open = wil_default_open, + .llseek = default_llseek, +}; + +static +struct dentry *wil_debugfs_create_ioblob(const char *name, + mode_t mode, + struct dentry *parent, + struct debugfs_blob_wrapper *blob) +{ + return debugfs_create_file(name, mode, parent, blob, &fops_ioblob); +} +/*---reset---*/ +static ssize_t wil_write_file_reset(struct file *file, const char __user *buf, + size_t len, loff_t *ppos) +{ + struct wil6210_priv *wil = file->private_data; + struct net_device *ndev = wil_to_ndev(wil); + + /** + * BUG: + * this code does NOT sync device state with the rest of system + * use with care, debug only!!! + */ + rtnl_lock(); + dev_close(ndev); + ndev->flags &= ~IFF_UP; + rtnl_unlock(); + wil_reset(wil); + + return len; +} + +static const struct file_operations fops_reset = { + .write = wil_write_file_reset, + .open = wil_default_open, +}; +/*---------Tx descriptor------------*/ + +static int wil_txdesc_debugfs_show(struct seq_file *s, void *data) +{ + struct wil6210_priv *wil = s->private; + struct vring *vring = &(wil->vring_tx[0]); + + if (!vring->va) { + seq_printf(s, "No Tx VRING\n"); + return 0; + } + + if (dbg_txdesc_index < vring->size) { + volatile struct vring_tx_desc *d = + &(vring->va[dbg_txdesc_index].tx); + volatile u32 *u = (volatile u32 *)d; + struct sk_buff *skb = vring->ctx[dbg_txdesc_index]; + + seq_printf(s, "Tx[%3d] = {\n", dbg_txdesc_index); + seq_printf(s, " MAC = 0x%08x 0x%08x 0x%08x 0x%08x\n", + u[0], u[1], u[2], u[3]); + seq_printf(s, " DMA = 0x%08x 0x%08x 0x%08x 0x%08x\n", + u[4], u[5], u[6], u[7]); + seq_printf(s, " SKB = %p\n", skb); + + if (skb) { + unsigned char printbuf[16 * 3 + 2]; + int i = 0; + int len = skb_headlen(skb); + void *p = skb->data; + + seq_printf(s, " len = %d\n", len); + + while (i < len) { + int l = min(len - i, 16); + hex_dump_to_buffer(p + i, l, 16, 1, printbuf, + sizeof(printbuf), false); + seq_printf(s, " : %s\n", printbuf); + i += l; + } + } + seq_printf(s, "}\n"); + } else { + seq_printf(s, "TxDesc index (%d) >= size (%d)\n", + dbg_txdesc_index, vring->size); + } + + return 0; +} + +static int wil_txdesc_seq_open(struct inode *inode, struct file *file) +{ + return single_open(file, wil_txdesc_debugfs_show, inode->i_private); +} + +static const struct file_operations fops_txdesc = { + .open = wil_txdesc_seq_open, + .release = single_release, + .read = seq_read, + .llseek = seq_lseek, +}; + +/*---------beamforming------------*/ +static int wil_bf_debugfs_show(struct seq_file *s, void *data) +{ + struct wil6210_priv *wil = s->private; + seq_printf(s, + "TSF : 0x%016llx\n" + "TxMCS : %d\n" + "Sectors(rx:tx) my %2d:%2d peer %2d:%2d\n", + wil->stats.tsf, wil->stats.bf_mcs, + wil->stats.my_rx_sector, wil->stats.my_tx_sector, + wil->stats.peer_rx_sector, wil->stats.peer_tx_sector); + return 0; +} + +static int wil_bf_seq_open(struct inode *inode, struct file *file) +{ + return single_open(file, wil_bf_debugfs_show, inode->i_private); +} + +static const struct file_operations fops_bf = { + .open = wil_bf_seq_open, + .release = single_release, + .read = seq_read, + .llseek = seq_lseek, +}; +/*---------SSID------------*/ +static ssize_t wil_read_file_ssid(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct wil6210_priv *wil = file->private_data; + struct wireless_dev *wdev = wil_to_wdev(wil); + + return simple_read_from_buffer(user_buf, count, ppos, + wdev->ssid, wdev->ssid_len); +} + +static ssize_t wil_write_file_ssid(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct wil6210_priv *wil = file->private_data; + struct wireless_dev *wdev = wil_to_wdev(wil); + struct net_device *ndev = wil_to_ndev(wil); + + if (*ppos != 0) { + wil_err(wil, "Unable to set SSID substring from [%d]\n", + (int)*ppos); + return -EINVAL; + } + + if (count > sizeof(wdev->ssid)) { + wil_err(wil, "SSID too long, len = %d\n", (int)count); + return -EINVAL; + } + if (netif_running(ndev)) { + wil_err(wil, "Unable to change SSID on running interface\n"); + return -EINVAL; + } + + wdev->ssid_len = count; + return simple_write_to_buffer(wdev->ssid, wdev->ssid_len, ppos, + buf, count); +} + +static const struct file_operations fops_ssid = { + .read = wil_read_file_ssid, + .write = wil_write_file_ssid, + .open = wil_default_open, +}; + +/*----------------*/ +int wil6210_debugfs_init(struct wil6210_priv *wil) +{ + struct dentry *dbg = wil->debug = debugfs_create_dir(WIL_NAME, + wil_to_wiphy(wil)->debugfsdir); + + if (IS_ERR_OR_NULL(dbg)) + return -ENODEV; + + debugfs_create_file("mbox", S_IRUGO, dbg, wil, &fops_mbox); + debugfs_create_file("vrings", S_IRUGO, dbg, wil, &fops_vring); + debugfs_create_file("txdesc", S_IRUGO, dbg, wil, &fops_txdesc); + debugfs_create_u32("txdesc_index", S_IRUGO | S_IWUSR, dbg, + &dbg_txdesc_index); + debugfs_create_file("bf", S_IRUGO, dbg, wil, &fops_bf); + debugfs_create_file("ssid", S_IRUGO | S_IWUSR, dbg, wil, &fops_ssid); + debugfs_create_u32("secure_pcp", S_IRUGO | S_IWUSR, dbg, + &wil->secure_pcp); + + wil6210_debugfs_create_ISR(wil, "USER_ICR", dbg, + HOSTADDR(RGF_USER_USER_ICR)); + wil6210_debugfs_create_ISR(wil, "DMA_EP_TX_ICR", dbg, + HOSTADDR(RGF_DMA_EP_TX_ICR)); + wil6210_debugfs_create_ISR(wil, "DMA_EP_RX_ICR", dbg, + HOSTADDR(RGF_DMA_EP_RX_ICR)); + wil6210_debugfs_create_ISR(wil, "DMA_EP_MISC_ICR", dbg, + HOSTADDR(RGF_DMA_EP_MISC_ICR)); + wil6210_debugfs_create_pseudo_ISR(wil, dbg); + wil6210_debugfs_create_ITR_CNT(wil, dbg); + + debugfs_create_u32("mem_addr", S_IRUGO | S_IWUSR, dbg, &mem_addr); + debugfs_create_file("mem_val", S_IRUGO, dbg, wil, &fops_memread); + + debugfs_create_file("reset", S_IWUSR, dbg, wil, &fops_reset); + + wil->rgf_blob.data = (void * __force)wil->csr + 0; + wil->rgf_blob.size = 0xa000; + wil_debugfs_create_ioblob("blob_rgf", S_IRUGO, dbg, &wil->rgf_blob); + + wil->fw_code_blob.data = (void * __force)wil->csr + 0x40000; + wil->fw_code_blob.size = 0x40000; + wil_debugfs_create_ioblob("blob_fw_code", S_IRUGO, dbg, + &wil->fw_code_blob); + + wil->fw_data_blob.data = (void * __force)wil->csr + 0x80000; + wil->fw_data_blob.size = 0x8000; + wil_debugfs_create_ioblob("blob_fw_data", S_IRUGO, dbg, + &wil->fw_data_blob); + + wil->fw_peri_blob.data = (void * __force)wil->csr + 0x88000; + wil->fw_peri_blob.size = 0x18000; + wil_debugfs_create_ioblob("blob_fw_peri", S_IRUGO, dbg, + &wil->fw_peri_blob); + + wil->uc_code_blob.data = (void * __force)wil->csr + 0xa0000; + wil->uc_code_blob.size = 0x10000; + wil_debugfs_create_ioblob("blob_uc_code", S_IRUGO, dbg, + &wil->uc_code_blob); + + wil->uc_data_blob.data = (void * __force)wil->csr + 0xb0000; + wil->uc_data_blob.size = 0x4000; + wil_debugfs_create_ioblob("blob_uc_data", S_IRUGO, dbg, + &wil->uc_data_blob); + + return 0; +} + +void wil6210_debugfs_remove(struct wil6210_priv *wil) +{ + debugfs_remove_recursive(wil->debug); + wil->debug = NULL; +} diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c new file mode 100644 index 000000000000..38049da71049 --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/interrupt.c @@ -0,0 +1,471 @@ +/* + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include + +#include "wil6210.h" + +/** + * Theory of operation: + * + * There is ISR pseudo-cause register, + * dma_rgf->DMA_RGF.PSEUDO_CAUSE.PSEUDO_CAUSE + * Its bits represents OR'ed bits from 3 real ISR registers: + * TX, RX, and MISC. + * + * Registers may be configured to either "write 1 to clear" or + * "clear on read" mode + * + * When handling interrupt, one have to mask/unmask interrupts for the + * real ISR registers, or hardware may malfunction. + * + */ + +#define WIL6210_IRQ_DISABLE (0xFFFFFFFFUL) +#define WIL6210_IMC_RX BIT_DMA_EP_RX_ICR_RX_DONE +#define WIL6210_IMC_TX (BIT_DMA_EP_TX_ICR_TX_DONE | \ + BIT_DMA_EP_TX_ICR_TX_DONE_N(0)) +#define WIL6210_IMC_MISC (ISR_MISC_FW_READY | ISR_MISC_MBOX_EVT) + +#define WIL6210_IRQ_PSEUDO_MASK (u32)(~(BIT_DMA_PSEUDO_CAUSE_RX | \ + BIT_DMA_PSEUDO_CAUSE_TX | \ + BIT_DMA_PSEUDO_CAUSE_MISC)) + +#if defined(CONFIG_WIL6210_ISR_COR) +/* configure to Clear-On-Read mode */ +#define WIL_ICR_ICC_VALUE (0xFFFFFFFFUL) + +static inline void wil_icr_clear(u32 x, void __iomem *addr) +{ + +} +#else /* defined(CONFIG_WIL6210_ISR_COR) */ +/* configure to Write-1-to-Clear mode */ +#define WIL_ICR_ICC_VALUE (0UL) + +static inline void wil_icr_clear(u32 x, void __iomem *addr) +{ + iowrite32(x, addr); +} +#endif /* defined(CONFIG_WIL6210_ISR_COR) */ + +static inline u32 wil_ioread32_and_clear(void __iomem *addr) +{ + u32 x = ioread32(addr); + + wil_icr_clear(x, addr); + + return x; +} + +static void wil6210_mask_irq_tx(struct wil6210_priv *wil) +{ + iowrite32(WIL6210_IRQ_DISABLE, wil->csr + + HOSTADDR(RGF_DMA_EP_TX_ICR) + + offsetof(struct RGF_ICR, IMS)); +} + +static void wil6210_mask_irq_rx(struct wil6210_priv *wil) +{ + iowrite32(WIL6210_IRQ_DISABLE, wil->csr + + HOSTADDR(RGF_DMA_EP_RX_ICR) + + offsetof(struct RGF_ICR, IMS)); +} + +static void wil6210_mask_irq_misc(struct wil6210_priv *wil) +{ + iowrite32(WIL6210_IRQ_DISABLE, wil->csr + + HOSTADDR(RGF_DMA_EP_MISC_ICR) + + offsetof(struct RGF_ICR, IMS)); +} + +static void wil6210_mask_irq_pseudo(struct wil6210_priv *wil) +{ + wil_dbg_IRQ(wil, "%s()\n", __func__); + + iowrite32(WIL6210_IRQ_DISABLE, wil->csr + + HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW)); + + clear_bit(wil_status_irqen, &wil->status); +} + +static void wil6210_unmask_irq_tx(struct wil6210_priv *wil) +{ + iowrite32(WIL6210_IMC_TX, wil->csr + + HOSTADDR(RGF_DMA_EP_TX_ICR) + + offsetof(struct RGF_ICR, IMC)); +} + +static void wil6210_unmask_irq_rx(struct wil6210_priv *wil) +{ + iowrite32(WIL6210_IMC_RX, wil->csr + + HOSTADDR(RGF_DMA_EP_RX_ICR) + + offsetof(struct RGF_ICR, IMC)); +} + +static void wil6210_unmask_irq_misc(struct wil6210_priv *wil) +{ + iowrite32(WIL6210_IMC_MISC, wil->csr + + HOSTADDR(RGF_DMA_EP_MISC_ICR) + + offsetof(struct RGF_ICR, IMC)); +} + +static void wil6210_unmask_irq_pseudo(struct wil6210_priv *wil) +{ + wil_dbg_IRQ(wil, "%s()\n", __func__); + + set_bit(wil_status_irqen, &wil->status); + + iowrite32(WIL6210_IRQ_PSEUDO_MASK, wil->csr + + HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW)); +} + +void wil6210_disable_irq(struct wil6210_priv *wil) +{ + wil_dbg_IRQ(wil, "%s()\n", __func__); + + wil6210_mask_irq_tx(wil); + wil6210_mask_irq_rx(wil); + wil6210_mask_irq_misc(wil); + wil6210_mask_irq_pseudo(wil); +} + +void wil6210_enable_irq(struct wil6210_priv *wil) +{ + wil_dbg_IRQ(wil, "%s()\n", __func__); + + iowrite32(WIL_ICR_ICC_VALUE, wil->csr + HOSTADDR(RGF_DMA_EP_RX_ICR) + + offsetof(struct RGF_ICR, ICC)); + iowrite32(WIL_ICR_ICC_VALUE, wil->csr + HOSTADDR(RGF_DMA_EP_TX_ICR) + + offsetof(struct RGF_ICR, ICC)); + iowrite32(WIL_ICR_ICC_VALUE, wil->csr + HOSTADDR(RGF_DMA_EP_MISC_ICR) + + offsetof(struct RGF_ICR, ICC)); + + wil6210_unmask_irq_pseudo(wil); + wil6210_unmask_irq_tx(wil); + wil6210_unmask_irq_rx(wil); + wil6210_unmask_irq_misc(wil); +} + +static irqreturn_t wil6210_irq_rx(int irq, void *cookie) +{ + struct wil6210_priv *wil = cookie; + u32 isr = wil_ioread32_and_clear(wil->csr + + HOSTADDR(RGF_DMA_EP_RX_ICR) + + offsetof(struct RGF_ICR, ICR)); + + wil_dbg_IRQ(wil, "ISR RX 0x%08x\n", isr); + + if (!isr) { + wil_err(wil, "spurious IRQ: RX\n"); + return IRQ_NONE; + } + + wil6210_mask_irq_rx(wil); + + if (isr & BIT_DMA_EP_RX_ICR_RX_DONE) { + wil_dbg_IRQ(wil, "RX done\n"); + isr &= ~BIT_DMA_EP_RX_ICR_RX_DONE; + wil_rx_handle(wil); + } + + if (isr) + wil_err(wil, "un-handled RX ISR bits 0x%08x\n", isr); + + wil6210_unmask_irq_rx(wil); + + return IRQ_HANDLED; +} + +static irqreturn_t wil6210_irq_tx(int irq, void *cookie) +{ + struct wil6210_priv *wil = cookie; + u32 isr = wil_ioread32_and_clear(wil->csr + + HOSTADDR(RGF_DMA_EP_TX_ICR) + + offsetof(struct RGF_ICR, ICR)); + + wil_dbg_IRQ(wil, "ISR TX 0x%08x\n", isr); + + if (!isr) { + wil_err(wil, "spurious IRQ: TX\n"); + return IRQ_NONE; + } + + wil6210_mask_irq_tx(wil); + + if (isr & BIT_DMA_EP_TX_ICR_TX_DONE) { + uint i; + wil_dbg_IRQ(wil, "TX done\n"); + isr &= ~BIT_DMA_EP_TX_ICR_TX_DONE; + for (i = 0; i < 24; i++) { + u32 mask = BIT_DMA_EP_TX_ICR_TX_DONE_N(i); + if (isr & mask) { + isr &= ~mask; + wil_dbg_IRQ(wil, "TX done(%i)\n", i); + wil_tx_complete(wil, i); + } + } + } + + if (isr) + wil_err(wil, "un-handled TX ISR bits 0x%08x\n", isr); + + wil6210_unmask_irq_tx(wil); + + return IRQ_HANDLED; +} + +static irqreturn_t wil6210_irq_misc(int irq, void *cookie) +{ + struct wil6210_priv *wil = cookie; + u32 isr = wil_ioread32_and_clear(wil->csr + + HOSTADDR(RGF_DMA_EP_MISC_ICR) + + offsetof(struct RGF_ICR, ICR)); + + wil_dbg_IRQ(wil, "ISR MISC 0x%08x\n", isr); + + if (!isr) { + wil_err(wil, "spurious IRQ: MISC\n"); + return IRQ_NONE; + } + + wil6210_mask_irq_misc(wil); + + if (isr & ISR_MISC_FW_READY) { + wil_dbg_IRQ(wil, "IRQ: FW ready\n"); + /** + * Actual FW ready indicated by the + * WMI_FW_READY_EVENTID + */ + isr &= ~ISR_MISC_FW_READY; + } + + wil->isr_misc = isr; + + if (isr) { + return IRQ_WAKE_THREAD; + } else { + wil6210_unmask_irq_misc(wil); + return IRQ_HANDLED; + } +} + +static irqreturn_t wil6210_irq_misc_thread(int irq, void *cookie) +{ + struct wil6210_priv *wil = cookie; + u32 isr = wil->isr_misc; + + wil_dbg_IRQ(wil, "Thread ISR MISC 0x%08x\n", isr); + + if (isr & ISR_MISC_MBOX_EVT) { + wil_dbg_IRQ(wil, "MBOX event\n"); + wmi_recv_cmd(wil); + isr &= ~ISR_MISC_MBOX_EVT; + } + + if (isr) + wil_err(wil, "un-handled MISC ISR bits 0x%08x\n", isr); + + wil->isr_misc = 0; + + wil6210_unmask_irq_misc(wil); + + return IRQ_HANDLED; +} + +/** + * thread IRQ handler + */ +static irqreturn_t wil6210_thread_irq(int irq, void *cookie) +{ + struct wil6210_priv *wil = cookie; + + wil_dbg_IRQ(wil, "Thread IRQ\n"); + /* Discover real IRQ cause */ + if (wil->isr_misc) + wil6210_irq_misc_thread(irq, cookie); + + wil6210_unmask_irq_pseudo(wil); + + return IRQ_HANDLED; +} + +/* DEBUG + * There is subtle bug in hardware that causes IRQ to raise when it should be + * masked. It is quite rare and hard to debug. + * + * Catch irq issue if it happens and print all I can. + */ +static int wil6210_debug_irq_mask(struct wil6210_priv *wil, u32 pseudo_cause) +{ + if (!test_bit(wil_status_irqen, &wil->status)) { + u32 icm_rx = wil_ioread32_and_clear(wil->csr + + HOSTADDR(RGF_DMA_EP_RX_ICR) + + offsetof(struct RGF_ICR, ICM)); + u32 icr_rx = wil_ioread32_and_clear(wil->csr + + HOSTADDR(RGF_DMA_EP_RX_ICR) + + offsetof(struct RGF_ICR, ICR)); + u32 imv_rx = ioread32(wil->csr + + HOSTADDR(RGF_DMA_EP_RX_ICR) + + offsetof(struct RGF_ICR, IMV)); + u32 icm_tx = wil_ioread32_and_clear(wil->csr + + HOSTADDR(RGF_DMA_EP_TX_ICR) + + offsetof(struct RGF_ICR, ICM)); + u32 icr_tx = wil_ioread32_and_clear(wil->csr + + HOSTADDR(RGF_DMA_EP_TX_ICR) + + offsetof(struct RGF_ICR, ICR)); + u32 imv_tx = ioread32(wil->csr + + HOSTADDR(RGF_DMA_EP_TX_ICR) + + offsetof(struct RGF_ICR, IMV)); + u32 icm_misc = wil_ioread32_and_clear(wil->csr + + HOSTADDR(RGF_DMA_EP_MISC_ICR) + + offsetof(struct RGF_ICR, ICM)); + u32 icr_misc = wil_ioread32_and_clear(wil->csr + + HOSTADDR(RGF_DMA_EP_MISC_ICR) + + offsetof(struct RGF_ICR, ICR)); + u32 imv_misc = ioread32(wil->csr + + HOSTADDR(RGF_DMA_EP_MISC_ICR) + + offsetof(struct RGF_ICR, IMV)); + wil_err(wil, "IRQ when it should be masked: pseudo 0x%08x\n" + "Rx icm:icr:imv 0x%08x 0x%08x 0x%08x\n" + "Tx icm:icr:imv 0x%08x 0x%08x 0x%08x\n" + "Misc icm:icr:imv 0x%08x 0x%08x 0x%08x\n", + pseudo_cause, + icm_rx, icr_rx, imv_rx, + icm_tx, icr_tx, imv_tx, + icm_misc, icr_misc, imv_misc); + + return -EINVAL; + } + + return 0; +} + +static irqreturn_t wil6210_hardirq(int irq, void *cookie) +{ + irqreturn_t rc = IRQ_HANDLED; + struct wil6210_priv *wil = cookie; + u32 pseudo_cause = ioread32(wil->csr + HOSTADDR(RGF_DMA_PSEUDO_CAUSE)); + + /** + * pseudo_cause is Clear-On-Read, no need to ACK + */ + if ((pseudo_cause == 0) || ((pseudo_cause & 0xff) == 0xff)) + return IRQ_NONE; + + /* FIXME: IRQ mask debug */ + if (wil6210_debug_irq_mask(wil, pseudo_cause)) + return IRQ_NONE; + + wil6210_mask_irq_pseudo(wil); + + /* Discover real IRQ cause + * There are 2 possible phases for every IRQ: + * - hard IRQ handler called right here + * - threaded handler called later + * + * Hard IRQ handler reads and clears ISR. + * + * If threaded handler requested, hard IRQ handler + * returns IRQ_WAKE_THREAD and saves ISR register value + * for the threaded handler use. + * + * voting for wake thread - need at least 1 vote + */ + if ((pseudo_cause & BIT_DMA_PSEUDO_CAUSE_RX) && + (wil6210_irq_rx(irq, cookie) == IRQ_WAKE_THREAD)) + rc = IRQ_WAKE_THREAD; + + if ((pseudo_cause & BIT_DMA_PSEUDO_CAUSE_TX) && + (wil6210_irq_tx(irq, cookie) == IRQ_WAKE_THREAD)) + rc = IRQ_WAKE_THREAD; + + if ((pseudo_cause & BIT_DMA_PSEUDO_CAUSE_MISC) && + (wil6210_irq_misc(irq, cookie) == IRQ_WAKE_THREAD)) + rc = IRQ_WAKE_THREAD; + + /* if thread is requested, it will unmask IRQ */ + if (rc != IRQ_WAKE_THREAD) + wil6210_unmask_irq_pseudo(wil); + + wil_dbg_IRQ(wil, "Hard IRQ 0x%08x\n", pseudo_cause); + + return rc; +} + +static int wil6210_request_3msi(struct wil6210_priv *wil, int irq) +{ + int rc; + /* + * IRQ's are in the following order: + * - Tx + * - Rx + * - Misc + */ + + rc = request_irq(irq, wil6210_irq_tx, IRQF_SHARED, + WIL_NAME"_tx", wil); + if (rc) + return rc; + + rc = request_irq(irq + 1, wil6210_irq_rx, IRQF_SHARED, + WIL_NAME"_rx", wil); + if (rc) + goto free0; + + rc = request_threaded_irq(irq + 2, wil6210_irq_misc, + wil6210_irq_misc_thread, + IRQF_SHARED, WIL_NAME"_misc", wil); + if (rc) + goto free1; + + return 0; + /* error branch */ +free1: + free_irq(irq + 1, wil); +free0: + free_irq(irq, wil); + + return rc; +} + +int wil6210_init_irq(struct wil6210_priv *wil, int irq) +{ + int rc; + if (wil->n_msi == 3) + rc = wil6210_request_3msi(wil, irq); + else + rc = request_threaded_irq(irq, wil6210_hardirq, + wil6210_thread_irq, + wil->n_msi ? 0 : IRQF_SHARED, + WIL_NAME, wil); + if (rc) + return rc; + + wil6210_enable_irq(wil); + + return 0; +} + +void wil6210_fini_irq(struct wil6210_priv *wil, int irq) +{ + wil6210_disable_irq(wil); + free_irq(irq, wil); + if (wil->n_msi == 3) { + free_irq(irq + 1, wil); + free_irq(irq + 2, wil); + } +} diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c new file mode 100644 index 000000000000..95fcd361322b --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -0,0 +1,407 @@ +/* + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "wil6210.h" + +/* + * Due to a hardware issue, + * one has to read/write to/from NIC in 32-bit chunks; + * regular memcpy_fromio and siblings will + * not work on 64-bit platform - it uses 64-bit transactions + * + * Force 32-bit transactions to enable NIC on 64-bit platforms + * + * To avoid byte swap on big endian host, __raw_{read|write}l + * should be used - {read|write}l would swap bytes to provide + * little endian on PCI value in host endianness. + */ +void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src, + size_t count) +{ + u32 *d = dst; + const volatile u32 __iomem *s = src; + + /* size_t is unsigned, if (count%4 != 0) it will wrap */ + for (count += 4; count > 4; count -= 4) + *d++ = __raw_readl(s++); +} + +void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src, + size_t count) +{ + volatile u32 __iomem *d = dst; + const u32 *s = src; + + for (count += 4; count > 4; count -= 4) + __raw_writel(*s++, d++); +} + +static void _wil6210_disconnect(struct wil6210_priv *wil, void *bssid) +{ + uint i; + struct net_device *ndev = wil_to_ndev(wil); + struct wireless_dev *wdev = wil->wdev; + + wil_dbg(wil, "%s()\n", __func__); + + wil_link_off(wil); + clear_bit(wil_status_fwconnected, &wil->status); + + switch (wdev->sme_state) { + case CFG80211_SME_CONNECTED: + cfg80211_disconnected(ndev, WLAN_STATUS_UNSPECIFIED_FAILURE, + NULL, 0, GFP_KERNEL); + break; + case CFG80211_SME_CONNECTING: + cfg80211_connect_result(ndev, bssid, NULL, 0, NULL, 0, + WLAN_STATUS_UNSPECIFIED_FAILURE, + GFP_KERNEL); + break; + default: + ; + } + + for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) + wil_vring_fini_tx(wil, i); +} + +static void wil_disconnect_worker(struct work_struct *work) +{ + struct wil6210_priv *wil = container_of(work, + struct wil6210_priv, disconnect_worker); + + _wil6210_disconnect(wil, NULL); +} + +static void wil_connect_timer_fn(ulong x) +{ + struct wil6210_priv *wil = (void *)x; + + wil_dbg(wil, "Connect timeout\n"); + + /* reschedule to thread context - disconnect won't + * run from atomic context + */ + schedule_work(&wil->disconnect_worker); +} + +int wil_priv_init(struct wil6210_priv *wil) +{ + wil_dbg(wil, "%s()\n", __func__); + + mutex_init(&wil->mutex); + mutex_init(&wil->wmi_mutex); + + init_completion(&wil->wmi_ready); + + wil->pending_connect_cid = -1; + setup_timer(&wil->connect_timer, wil_connect_timer_fn, (ulong)wil); + + INIT_WORK(&wil->wmi_connect_worker, wmi_connect_worker); + INIT_WORK(&wil->disconnect_worker, wil_disconnect_worker); + INIT_WORK(&wil->wmi_event_worker, wmi_event_worker); + + INIT_LIST_HEAD(&wil->pending_wmi_ev); + spin_lock_init(&wil->wmi_ev_lock); + + wil->wmi_wq = create_singlethread_workqueue(WIL_NAME"_wmi"); + if (!wil->wmi_wq) + return -EAGAIN; + + wil->wmi_wq_conn = create_singlethread_workqueue(WIL_NAME"_connect"); + if (!wil->wmi_wq_conn) { + destroy_workqueue(wil->wmi_wq); + return -EAGAIN; + } + + /* make shadow copy of registers that should not change on run time */ + wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX, + sizeof(struct wil6210_mbox_ctl)); + wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx); + wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx); + + return 0; +} + +void wil6210_disconnect(struct wil6210_priv *wil, void *bssid) +{ + del_timer_sync(&wil->connect_timer); + _wil6210_disconnect(wil, bssid); +} + +void wil_priv_deinit(struct wil6210_priv *wil) +{ + cancel_work_sync(&wil->disconnect_worker); + wil6210_disconnect(wil, NULL); + wmi_event_flush(wil); + destroy_workqueue(wil->wmi_wq_conn); + destroy_workqueue(wil->wmi_wq); +} + +static void wil_target_reset(struct wil6210_priv *wil) +{ + wil_dbg(wil, "Resetting...\n"); + + /* register write */ +#define W(a, v) iowrite32(v, wil->csr + HOSTADDR(a)) + /* register set = read, OR, write */ +#define S(a, v) iowrite32(ioread32(wil->csr + HOSTADDR(a)) | v, \ + wil->csr + HOSTADDR(a)) + + /* hpal_perst_from_pad_src_n_mask */ + S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(6)); + /* car_perst_rst_src_n_mask */ + S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(7)); + + W(RGF_USER_MAC_CPU_0, BIT(1)); /* mac_cpu_man_rst */ + W(RGF_USER_USER_CPU_0, BIT(1)); /* user_cpu_man_rst */ + + msleep(100); + + W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xFE000000); + W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003F); + W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000170); + W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FC00); + + msleep(100); + + W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0); + W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0); + W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0); + W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0); + + W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000001); + W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00000080); + W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0); + + msleep(2000); + + W(RGF_USER_USER_CPU_0, BIT(0)); /* user_cpu_man_de_rst */ + + msleep(2000); + + wil_dbg(wil, "Reset completed\n"); + +#undef W +#undef S +} + +void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r) +{ + le32_to_cpus(&r->base); + le16_to_cpus(&r->entry_size); + le16_to_cpus(&r->size); + le32_to_cpus(&r->tail); + le32_to_cpus(&r->head); +} + +static int wil_wait_for_fw_ready(struct wil6210_priv *wil) +{ + ulong to = msecs_to_jiffies(1000); + ulong left = wait_for_completion_timeout(&wil->wmi_ready, to); + if (0 == left) { + wil_err(wil, "Firmware not ready\n"); + return -ETIME; + } else { + wil_dbg(wil, "FW ready after %d ms\n", + jiffies_to_msecs(to-left)); + } + return 0; +} + +/* + * We reset all the structures, and we reset the UMAC. + * After calling this routine, you're expected to reload + * the firmware. + */ +int wil_reset(struct wil6210_priv *wil) +{ + int rc; + + cancel_work_sync(&wil->disconnect_worker); + wil6210_disconnect(wil, NULL); + + wmi_event_flush(wil); + + flush_workqueue(wil->wmi_wq); + flush_workqueue(wil->wmi_wq_conn); + + wil6210_disable_irq(wil); + wil->status = 0; + + /* TODO: put MAC in reset */ + wil_target_reset(wil); + + /* init after reset */ + wil->pending_connect_cid = -1; + INIT_COMPLETION(wil->wmi_ready); + + /* make shadow copy of registers that should not change on run time */ + wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX, + sizeof(struct wil6210_mbox_ctl)); + wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx); + wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx); + + /* TODO: release MAC reset */ + wil6210_enable_irq(wil); + + /* we just started MAC, wait for FW ready */ + rc = wil_wait_for_fw_ready(wil); + + return rc; +} + + +void wil_link_on(struct wil6210_priv *wil) +{ + struct net_device *ndev = wil_to_ndev(wil); + + wil_dbg(wil, "%s()\n", __func__); + + netif_carrier_on(ndev); + netif_tx_wake_all_queues(ndev); +} + +void wil_link_off(struct wil6210_priv *wil) +{ + struct net_device *ndev = wil_to_ndev(wil); + + wil_dbg(wil, "%s()\n", __func__); + + netif_tx_stop_all_queues(ndev); + netif_carrier_off(ndev); +} + +static int __wil_up(struct wil6210_priv *wil) +{ + struct net_device *ndev = wil_to_ndev(wil); + struct wireless_dev *wdev = wil->wdev; + struct ieee80211_channel *channel = wdev->preset_chandef.chan; + int rc; + int bi; + u16 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype); + + rc = wil_reset(wil); + if (rc) + return rc; + + /* FIXME Firmware works now in PBSS mode(ToDS=0, FromDS=0) */ + wmi_nettype = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC); + switch (wdev->iftype) { + case NL80211_IFTYPE_STATION: + wil_dbg(wil, "type: STATION\n"); + bi = 0; + ndev->type = ARPHRD_ETHER; + break; + case NL80211_IFTYPE_AP: + wil_dbg(wil, "type: AP\n"); + bi = 100; + ndev->type = ARPHRD_ETHER; + break; + case NL80211_IFTYPE_P2P_CLIENT: + wil_dbg(wil, "type: P2P_CLIENT\n"); + bi = 0; + ndev->type = ARPHRD_ETHER; + break; + case NL80211_IFTYPE_P2P_GO: + wil_dbg(wil, "type: P2P_GO\n"); + bi = 100; + ndev->type = ARPHRD_ETHER; + break; + case NL80211_IFTYPE_MONITOR: + wil_dbg(wil, "type: Monitor\n"); + bi = 0; + ndev->type = ARPHRD_IEEE80211_RADIOTAP; + /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_RADIOTAP ? */ + break; + default: + return -EOPNOTSUPP; + } + + /* Apply profile in the following order: */ + /* SSID and channel for the AP */ + switch (wdev->iftype) { + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_P2P_GO: + if (wdev->ssid_len == 0) { + wil_err(wil, "SSID not set\n"); + return -EINVAL; + } + wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid); + if (channel) + wmi_set_channel(wil, channel->hw_value); + break; + default: + ; + } + + /* MAC address - pre-requisite for other commands */ + wmi_set_mac_address(wil, ndev->dev_addr); + + /* Set up beaconing if required. */ + rc = wmi_set_bcon(wil, bi, wmi_nettype); + if (rc) + return rc; + + /* Rx VRING. After MAC and beacon */ + wil_rx_init(wil); + + return 0; +} + +int wil_up(struct wil6210_priv *wil) +{ + int rc; + + mutex_lock(&wil->mutex); + rc = __wil_up(wil); + mutex_unlock(&wil->mutex); + + return rc; +} + +static int __wil_down(struct wil6210_priv *wil) +{ + if (wil->scan_request) { + cfg80211_scan_done(wil->scan_request, true); + wil->scan_request = NULL; + } + + wil6210_disconnect(wil, NULL); + wil_rx_fini(wil); + + return 0; +} + +int wil_down(struct wil6210_priv *wil) +{ + int rc; + + mutex_lock(&wil->mutex); + rc = __wil_down(wil); + mutex_unlock(&wil->mutex); + + return rc; +} diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c new file mode 100644 index 000000000000..3068b5cb53a7 --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/netdev.c @@ -0,0 +1,157 @@ +/* + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include +#include +#include + +#include "wil6210.h" + +static int wil_open(struct net_device *ndev) +{ + struct wil6210_priv *wil = ndev_to_wil(ndev); + + return wil_up(wil); +} + +static int wil_stop(struct net_device *ndev) +{ + struct wil6210_priv *wil = ndev_to_wil(ndev); + + return wil_down(wil); +} + +/* + * AC to queue mapping + * + * AC_VO -> queue 3 + * AC_VI -> queue 2 + * AC_BE -> queue 1 + * AC_BK -> queue 0 + */ +static u16 wil_select_queue(struct net_device *ndev, struct sk_buff *skb) +{ + static const u16 wil_1d_to_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 }; + struct wil6210_priv *wil = ndev_to_wil(ndev); + u16 rc; + + skb->priority = cfg80211_classify8021d(skb); + + rc = wil_1d_to_queue[skb->priority]; + + wil_dbg_TXRX(wil, "%s() %d -> %d\n", __func__, (int)skb->priority, + (int)rc); + + return rc; +} + +static const struct net_device_ops wil_netdev_ops = { + .ndo_open = wil_open, + .ndo_stop = wil_stop, + .ndo_start_xmit = wil_start_xmit, + .ndo_select_queue = wil_select_queue, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +void *wil_if_alloc(struct device *dev, void __iomem *csr) +{ + struct net_device *ndev; + struct wireless_dev *wdev; + struct wil6210_priv *wil; + struct ieee80211_channel *ch; + int rc = 0; + + wdev = wil_cfg80211_init(dev); + if (IS_ERR(wdev)) { + dev_err(dev, "wil_cfg80211_init failed\n"); + return wdev; + } + + wil = wdev_to_wil(wdev); + wil->csr = csr; + wil->wdev = wdev; + + rc = wil_priv_init(wil); + if (rc) { + dev_err(dev, "wil_priv_init failed\n"); + goto out_wdev; + } + + wdev->iftype = NL80211_IFTYPE_STATION; /* TODO */ + /* default monitor channel */ + ch = wdev->wiphy->bands[IEEE80211_BAND_60GHZ]->channels; + cfg80211_chandef_create(&wdev->preset_chandef, ch, NL80211_CHAN_NO_HT); + + ndev = alloc_netdev_mqs(0, "wlan%d", ether_setup, WIL6210_TX_QUEUES, 1); + if (!ndev) { + dev_err(dev, "alloc_netdev_mqs failed\n"); + rc = -ENOMEM; + goto out_priv; + } + + ndev->netdev_ops = &wil_netdev_ops; + ndev->ieee80211_ptr = wdev; + SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy)); + wdev->netdev = ndev; + + wil_link_off(wil); + + return wil; + + out_priv: + wil_priv_deinit(wil); + + out_wdev: + wil_wdev_free(wil); + + return ERR_PTR(rc); +} + +void wil_if_free(struct wil6210_priv *wil) +{ + struct net_device *ndev = wil_to_ndev(wil); + if (!ndev) + return; + + free_netdev(ndev); + wil_priv_deinit(wil); + wil_wdev_free(wil); +} + +int wil_if_add(struct wil6210_priv *wil) +{ + struct net_device *ndev = wil_to_ndev(wil); + int rc; + + rc = register_netdev(ndev); + if (rc < 0) { + dev_err(&ndev->dev, "Failed to register netdev: %d\n", rc); + return rc; + } + + wil_link_off(wil); + + return 0; +} + +void wil_if_remove(struct wil6210_priv *wil) +{ + struct net_device *ndev = wil_to_ndev(wil); + + unregister_netdev(ndev); +} diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c new file mode 100644 index 000000000000..0fc83edd6bad --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c @@ -0,0 +1,223 @@ +/* + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "wil6210.h" + +static int use_msi = 1; +module_param(use_msi, int, S_IRUGO); +MODULE_PARM_DESC(use_msi, + " Use MSI interrupt: " + "0 - don't, 1 - (default) - single, or 3"); + +/* Bus ops */ +static int wil_if_pcie_enable(struct wil6210_priv *wil) +{ + struct pci_dev *pdev = wil->pdev; + int rc; + + pci_set_master(pdev); + + /* + * how many MSI interrupts to request? + */ + switch (use_msi) { + case 3: + case 1: + case 0: + break; + default: + wil_err(wil, "Invalid use_msi=%d, default to 1\n", + use_msi); + use_msi = 1; + } + wil->n_msi = use_msi; + if (wil->n_msi) { + wil_dbg(wil, "Setup %d MSI interrupts\n", use_msi); + rc = pci_enable_msi_block(pdev, wil->n_msi); + if (rc && (wil->n_msi == 3)) { + wil_err(wil, "3 MSI mode failed, try 1 MSI\n"); + wil->n_msi = 1; + rc = pci_enable_msi_block(pdev, wil->n_msi); + } + if (rc) { + wil_err(wil, "pci_enable_msi failed, use INTx\n"); + wil->n_msi = 0; + } + } else { + wil_dbg(wil, "MSI interrupts disabled, use INTx\n"); + } + + rc = wil6210_init_irq(wil, pdev->irq); + if (rc) + goto stop_master; + + /* need reset here to obtain MAC */ + rc = wil_reset(wil); + if (rc) + goto release_irq; + + return 0; + + release_irq: + wil6210_fini_irq(wil, pdev->irq); + /* safe to call if no MSI */ + pci_disable_msi(pdev); + stop_master: + pci_clear_master(pdev); + return rc; +} + +static int wil_if_pcie_disable(struct wil6210_priv *wil) +{ + struct pci_dev *pdev = wil->pdev; + + pci_clear_master(pdev); + /* disable and release IRQ */ + wil6210_fini_irq(wil, pdev->irq); + /* safe to call if no MSI */ + pci_disable_msi(pdev); + /* TODO: disable HW */ + + return 0; +} + +static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct wil6210_priv *wil; + struct device *dev = &pdev->dev; + void __iomem *csr; + int rc; + + /* check HW */ + dev_info(&pdev->dev, WIL_NAME " device found [%04x:%04x] (rev %x)\n", + (int)pdev->vendor, (int)pdev->device, (int)pdev->revision); + + if (pci_resource_len(pdev, 0) != WIL6210_MEM_SIZE) { + dev_err(&pdev->dev, "Not " WIL_NAME "? " + "BAR0 size is %lu while expecting %lu\n", + (ulong)pci_resource_len(pdev, 0), WIL6210_MEM_SIZE); + return -ENODEV; + } + + rc = pci_enable_device(pdev); + if (rc) { + dev_err(&pdev->dev, "pci_enable_device failed\n"); + return -ENODEV; + } + /* rollback to err_disable_pdev */ + + rc = pci_request_region(pdev, 0, WIL_NAME); + if (rc) { + dev_err(&pdev->dev, "pci_request_region failed\n"); + goto err_disable_pdev; + } + /* rollback to err_release_reg */ + + csr = pci_ioremap_bar(pdev, 0); + if (!csr) { + dev_err(&pdev->dev, "pci_ioremap_bar failed\n"); + rc = -ENODEV; + goto err_release_reg; + } + /* rollback to err_iounmap */ + dev_info(&pdev->dev, "CSR at %pR -> %p\n", &pdev->resource[0], csr); + + wil = wil_if_alloc(dev, csr); + if (IS_ERR(wil)) { + rc = (int)PTR_ERR(wil); + dev_err(dev, "wil_if_alloc failed: %d\n", rc); + goto err_iounmap; + } + /* rollback to if_free */ + + pci_set_drvdata(pdev, wil); + wil->pdev = pdev; + + /* FW should raise IRQ when ready */ + rc = wil_if_pcie_enable(wil); + if (rc) { + wil_err(wil, "Enable device failed\n"); + goto if_free; + } + /* rollback to bus_disable */ + + rc = wil_if_add(wil); + if (rc) { + wil_err(wil, "wil_if_add failed: %d\n", rc); + goto bus_disable; + } + + wil6210_debugfs_init(wil); + + /* check FW is alive */ + wmi_echo(wil); + + return 0; + + bus_disable: + wil_if_pcie_disable(wil); + if_free: + wil_if_free(wil); + err_iounmap: + pci_iounmap(pdev, csr); + err_release_reg: + pci_release_region(pdev, 0); + err_disable_pdev: + pci_disable_device(pdev); + + return rc; +} + +static void wil_pcie_remove(struct pci_dev *pdev) +{ + struct wil6210_priv *wil = pci_get_drvdata(pdev); + + wil6210_debugfs_remove(wil); + wil_if_pcie_disable(wil); + wil_if_remove(wil); + wil_if_free(wil); + pci_iounmap(pdev, wil->csr); + pci_release_region(pdev, 0); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +} + +static DEFINE_PCI_DEVICE_TABLE(wil6210_pcie_ids) = { + { PCI_DEVICE(0x1ae9, 0x0301) }, + { /* end: all zeroes */ }, +}; +MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids); + +static struct pci_driver wil6210_driver = { + .probe = wil_pcie_probe, + .remove = wil_pcie_remove, + .id_table = wil6210_pcie_ids, + .name = WIL_NAME, +}; + +module_pci_driver(wil6210_driver); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_AUTHOR("Qualcomm Atheros "); +MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card"); diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c new file mode 100644 index 000000000000..f29c294413cf --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -0,0 +1,871 @@ +/* + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "wil6210.h" +#include "wmi.h" +#include "txrx.h" + +static bool rtap_include_phy_info; +module_param(rtap_include_phy_info, bool, S_IRUGO); +MODULE_PARM_DESC(rtap_include_phy_info, + " Include PHY info in the radiotap header, default - no"); + +static inline int wil_vring_is_empty(struct vring *vring) +{ + return vring->swhead == vring->swtail; +} + +static inline u32 wil_vring_next_tail(struct vring *vring) +{ + return (vring->swtail + 1) % vring->size; +} + +static inline void wil_vring_advance_head(struct vring *vring, int n) +{ + vring->swhead = (vring->swhead + n) % vring->size; +} + +static inline int wil_vring_is_full(struct vring *vring) +{ + return wil_vring_next_tail(vring) == vring->swhead; +} +/* + * Available space in Tx Vring + */ +static inline int wil_vring_avail_tx(struct vring *vring) +{ + u32 swhead = vring->swhead; + u32 swtail = vring->swtail; + int used = (vring->size + swhead - swtail) % vring->size; + + return vring->size - used - 1; +} + +static int wil_vring_alloc(struct wil6210_priv *wil, struct vring *vring) +{ + struct device *dev = wil_to_dev(wil); + size_t sz = vring->size * sizeof(vring->va[0]); + uint i; + + BUILD_BUG_ON(sizeof(vring->va[0]) != 32); + + vring->swhead = 0; + vring->swtail = 0; + vring->ctx = kzalloc(vring->size * sizeof(vring->ctx[0]), GFP_KERNEL); + if (!vring->ctx) { + wil_err(wil, "vring_alloc [%d] failed to alloc ctx mem\n", + vring->size); + vring->va = NULL; + return -ENOMEM; + } + /* + * vring->va should be aligned on its size rounded up to power of 2 + * This is granted by the dma_alloc_coherent + */ + vring->va = dma_alloc_coherent(dev, sz, &vring->pa, GFP_KERNEL); + if (!vring->va) { + wil_err(wil, "vring_alloc [%d] failed to alloc DMA mem\n", + vring->size); + kfree(vring->ctx); + vring->ctx = NULL; + return -ENOMEM; + } + /* initially, all descriptors are SW owned + * For Tx and Rx, ownership bit is at the same location, thus + * we can use any + */ + for (i = 0; i < vring->size; i++) { + volatile struct vring_tx_desc *d = &(vring->va[i].tx); + d->dma.status = TX_DMA_STATUS_DU; + } + + wil_dbg(wil, "vring[%d] 0x%p:0x%016llx 0x%p\n", vring->size, + vring->va, (unsigned long long)vring->pa, vring->ctx); + + return 0; +} + +static void wil_vring_free(struct wil6210_priv *wil, struct vring *vring, + int tx) +{ + struct device *dev = wil_to_dev(wil); + size_t sz = vring->size * sizeof(vring->va[0]); + + while (!wil_vring_is_empty(vring)) { + if (tx) { + volatile struct vring_tx_desc *d = + &vring->va[vring->swtail].tx; + dma_addr_t pa = d->dma.addr_low | + ((u64)d->dma.addr_high << 32); + struct sk_buff *skb = vring->ctx[vring->swtail]; + if (skb) { + dma_unmap_single(dev, pa, d->dma.length, + DMA_TO_DEVICE); + dev_kfree_skb_any(skb); + vring->ctx[vring->swtail] = NULL; + } else { + dma_unmap_page(dev, pa, d->dma.length, + DMA_TO_DEVICE); + } + vring->swtail = wil_vring_next_tail(vring); + } else { /* rx */ + volatile struct vring_rx_desc *d = + &vring->va[vring->swtail].rx; + dma_addr_t pa = d->dma.addr_low | + ((u64)d->dma.addr_high << 32); + struct sk_buff *skb = vring->ctx[vring->swhead]; + dma_unmap_single(dev, pa, d->dma.length, + DMA_FROM_DEVICE); + kfree_skb(skb); + wil_vring_advance_head(vring, 1); + } + } + dma_free_coherent(dev, sz, (void *)vring->va, vring->pa); + kfree(vring->ctx); + vring->pa = 0; + vring->va = NULL; + vring->ctx = NULL; +} + +/** + * Allocate one skb for Rx VRING + * + * Safe to call from IRQ + */ +static int wil_vring_alloc_skb(struct wil6210_priv *wil, struct vring *vring, + u32 i, int headroom) +{ + struct device *dev = wil_to_dev(wil); + unsigned int sz = RX_BUF_LEN; + volatile struct vring_rx_desc *d = &(vring->va[i].rx); + dma_addr_t pa; + + /* TODO align */ + struct sk_buff *skb = dev_alloc_skb(sz + headroom); + if (unlikely(!skb)) + return -ENOMEM; + + skb_reserve(skb, headroom); + skb_put(skb, sz); + + pa = dma_map_single(dev, skb->data, skb->len, DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(dev, pa))) { + kfree_skb(skb); + return -ENOMEM; + } + + d->dma.d0 = BIT(9) | RX_DMA_D0_CMD_DMA_IT; + d->dma.addr_low = lower_32_bits(pa); + d->dma.addr_high = (u16)upper_32_bits(pa); + /* ip_length don't care */ + /* b11 don't care */ + /* error don't care */ + d->dma.status = 0; /* BIT(0) should be 0 for HW_OWNED */ + d->dma.length = sz; + vring->ctx[i] = skb; + + return 0; +} + +/** + * Adds radiotap header + * + * Any error indicated as "Bad FCS" + * + * Vendor data for 04:ce:14-1 (Wilocity-1) consists of: + * - Rx descriptor: 32 bytes + * - Phy info + */ +static void wil_rx_add_radiotap_header(struct wil6210_priv *wil, + struct sk_buff *skb, + volatile struct vring_rx_desc *d) +{ + struct wireless_dev *wdev = wil->wdev; + struct wil6210_rtap { + struct ieee80211_radiotap_header rthdr; + /* fields should be in the order of bits in rthdr.it_present */ + /* flags */ + u8 flags; + /* channel */ + __le16 chnl_freq __aligned(2); + __le16 chnl_flags; + /* MCS */ + u8 mcs_present; + u8 mcs_flags; + u8 mcs_index; + } __packed; + struct wil6210_rtap_vendor { + struct wil6210_rtap rtap; + /* vendor */ + u8 vendor_oui[3] __aligned(2); + u8 vendor_ns; + __le16 vendor_skip; + u8 vendor_data[0]; + } __packed; + struct wil6210_rtap_vendor *rtap_vendor; + int rtap_len = sizeof(struct wil6210_rtap); + int phy_length = 0; /* phy info header size, bytes */ + static char phy_data[128]; + struct ieee80211_channel *ch = wdev->preset_chandef.chan; + + if (rtap_include_phy_info) { + rtap_len = sizeof(*rtap_vendor) + sizeof(*d); + /* calculate additional length */ + if (d->dma.status & RX_DMA_STATUS_PHY_INFO) { + /** + * PHY info starts from 8-byte boundary + * there are 8-byte lines, last line may be partially + * written (HW bug), thus FW configures for last line + * to be excessive. Driver skips this last line. + */ + int len = min_t(int, 8 + sizeof(phy_data), + wil_rxdesc_phy_length(d)); + if (len > 8) { + void *p = skb_tail_pointer(skb); + void *pa = PTR_ALIGN(p, 8); + if (skb_tailroom(skb) >= len + (pa - p)) { + phy_length = len - 8; + memcpy(phy_data, pa, phy_length); + } + } + } + rtap_len += phy_length; + } + + if (skb_headroom(skb) < rtap_len && + pskb_expand_head(skb, rtap_len, 0, GFP_ATOMIC)) { + wil_err(wil, "Unable to expand headrom to %d\n", rtap_len); + return; + } + + rtap_vendor = (void *)skb_push(skb, rtap_len); + memset(rtap_vendor, 0, rtap_len); + + rtap_vendor->rtap.rthdr.it_version = PKTHDR_RADIOTAP_VERSION; + rtap_vendor->rtap.rthdr.it_len = cpu_to_le16(rtap_len); + rtap_vendor->rtap.rthdr.it_present = cpu_to_le32( + (1 << IEEE80211_RADIOTAP_FLAGS) | + (1 << IEEE80211_RADIOTAP_CHANNEL) | + (1 << IEEE80211_RADIOTAP_MCS)); + if (d->dma.status & RX_DMA_STATUS_ERROR) + rtap_vendor->rtap.flags |= IEEE80211_RADIOTAP_F_BADFCS; + + rtap_vendor->rtap.chnl_freq = cpu_to_le16(ch ? ch->center_freq : 58320); + rtap_vendor->rtap.chnl_flags = cpu_to_le16(0); + + rtap_vendor->rtap.mcs_present = IEEE80211_RADIOTAP_MCS_HAVE_MCS; + rtap_vendor->rtap.mcs_flags = 0; + rtap_vendor->rtap.mcs_index = wil_rxdesc_mcs(d); + + if (rtap_include_phy_info) { + rtap_vendor->rtap.rthdr.it_present |= cpu_to_le32(1 << + IEEE80211_RADIOTAP_VENDOR_NAMESPACE); + /* OUI for Wilocity 04:ce:14 */ + rtap_vendor->vendor_oui[0] = 0x04; + rtap_vendor->vendor_oui[1] = 0xce; + rtap_vendor->vendor_oui[2] = 0x14; + rtap_vendor->vendor_ns = 1; + /* Rx descriptor + PHY data */ + rtap_vendor->vendor_skip = cpu_to_le16(sizeof(*d) + + phy_length); + memcpy(rtap_vendor->vendor_data, (void *)d, sizeof(*d)); + memcpy(rtap_vendor->vendor_data + sizeof(*d), phy_data, + phy_length); + } +} + +/* + * Fast swap in place between 2 registers + */ +static void wil_swap_u16(u16 *a, u16 *b) +{ + *a ^= *b; + *b ^= *a; + *a ^= *b; +} + +static void wil_swap_ethaddr(void *data) +{ + struct ethhdr *eth = data; + u16 *s = (u16 *)eth->h_source; + u16 *d = (u16 *)eth->h_dest; + + wil_swap_u16(s++, d++); + wil_swap_u16(s++, d++); + wil_swap_u16(s, d); +} + +/** + * reap 1 frame from @swhead + * + * Safe to call from IRQ + */ +static struct sk_buff *wil_vring_reap_rx(struct wil6210_priv *wil, + struct vring *vring) +{ + struct device *dev = wil_to_dev(wil); + struct net_device *ndev = wil_to_ndev(wil); + volatile struct vring_rx_desc *d; + struct sk_buff *skb; + dma_addr_t pa; + unsigned int sz = RX_BUF_LEN; + u8 ftype; + u8 ds_bits; + + if (wil_vring_is_empty(vring)) + return NULL; + + d = &(vring->va[vring->swhead].rx); + if (!(d->dma.status & RX_DMA_STATUS_DU)) { + /* it is not error, we just reached end of Rx done area */ + return NULL; + } + + pa = d->dma.addr_low | ((u64)d->dma.addr_high << 32); + skb = vring->ctx[vring->swhead]; + dma_unmap_single(dev, pa, sz, DMA_FROM_DEVICE); + skb_trim(skb, d->dma.length); + + wil->stats.last_mcs_rx = wil_rxdesc_mcs(d); + + /* use radiotap header only if required */ + if (ndev->type == ARPHRD_IEEE80211_RADIOTAP) + wil_rx_add_radiotap_header(wil, skb, d); + + wil_dbg_TXRX(wil, "Rx[%3d] : %d bytes\n", vring->swhead, d->dma.length); + wil_hex_dump_TXRX("Rx ", DUMP_PREFIX_NONE, 32, 4, + (const void *)d, sizeof(*d), false); + + wil_vring_advance_head(vring, 1); + + /* no extra checks if in sniffer mode */ + if (ndev->type != ARPHRD_ETHER) + return skb; + /* + * Non-data frames may be delivered through Rx DMA channel (ex: BAR) + * Driver should recognize it by frame type, that is found + * in Rx descriptor. If type is not data, it is 802.11 frame as is + */ + ftype = wil_rxdesc_ftype(d) << 2; + if (ftype != IEEE80211_FTYPE_DATA) { + wil_dbg_TXRX(wil, "Non-data frame ftype 0x%08x\n", ftype); + /* TODO: process it */ + kfree_skb(skb); + return NULL; + } + + if (skb->len < ETH_HLEN) { + wil_err(wil, "Short frame, len = %d\n", skb->len); + /* TODO: process it (i.e. BAR) */ + kfree_skb(skb); + return NULL; + } + + ds_bits = wil_rxdesc_ds_bits(d); + if (ds_bits == 1) { + /* + * HW bug - in ToDS mode, i.e. Rx on AP side, + * addresses get swapped + */ + wil_swap_ethaddr(skb->data); + } + + return skb; +} + +/** + * allocate and fill up to @count buffers in rx ring + * buffers posted at @swtail + */ +static int wil_rx_refill(struct wil6210_priv *wil, int count) +{ + struct net_device *ndev = wil_to_ndev(wil); + struct vring *v = &wil->vring_rx; + u32 next_tail; + int rc = 0; + int headroom = ndev->type == ARPHRD_IEEE80211_RADIOTAP ? + WIL6210_RTAP_SIZE : 0; + + for (; next_tail = wil_vring_next_tail(v), + (next_tail != v->swhead) && (count-- > 0); + v->swtail = next_tail) { + rc = wil_vring_alloc_skb(wil, v, v->swtail, headroom); + if (rc) { + wil_err(wil, "Error %d in wil_rx_refill[%d]\n", + rc, v->swtail); + break; + } + } + iowrite32(v->swtail, wil->csr + HOSTADDR(v->hwtail)); + + return rc; +} + +/* + * Pass Rx packet to the netif. Update statistics. + */ +static void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev) +{ + int rc; + unsigned int len = skb->len; + + if (in_interrupt()) + rc = netif_rx(skb); + else + rc = netif_rx_ni(skb); + + if (likely(rc == NET_RX_SUCCESS)) { + ndev->stats.rx_packets++; + ndev->stats.rx_bytes += len; + + } else { + ndev->stats.rx_dropped++; + } +} + +/** + * Proceed all completed skb's from Rx VRING + * + * Safe to call from IRQ + */ +void wil_rx_handle(struct wil6210_priv *wil) +{ + struct net_device *ndev = wil_to_ndev(wil); + struct vring *v = &wil->vring_rx; + struct sk_buff *skb; + + if (!v->va) { + wil_err(wil, "Rx IRQ while Rx not yet initialized\n"); + return; + } + wil_dbg_TXRX(wil, "%s()\n", __func__); + while (NULL != (skb = wil_vring_reap_rx(wil, v))) { + wil_hex_dump_TXRX("Rx ", DUMP_PREFIX_OFFSET, 16, 1, + skb->data, skb_headlen(skb), false); + + skb_orphan(skb); + + if (wil->wdev->iftype == NL80211_IFTYPE_MONITOR) { + skb->dev = ndev; + skb_reset_mac_header(skb); + skb->ip_summed = CHECKSUM_UNNECESSARY; + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = htons(ETH_P_802_2); + + } else { + skb->protocol = eth_type_trans(skb, ndev); + } + + wil_netif_rx_any(skb, ndev); + } + wil_rx_refill(wil, v->size); +} + +int wil_rx_init(struct wil6210_priv *wil) +{ + struct net_device *ndev = wil_to_ndev(wil); + struct wireless_dev *wdev = wil->wdev; + struct vring *vring = &wil->vring_rx; + int rc; + struct wmi_cfg_rx_chain_cmd cmd = { + .action = WMI_RX_CHAIN_ADD, + .rx_sw_ring = { + .max_mpdu_size = cpu_to_le16(RX_BUF_LEN), + }, + .mid = 0, /* TODO - what is it? */ + .decap_trans_type = WMI_DECAP_TYPE_802_3, + }; + struct { + struct wil6210_mbox_hdr_wmi wmi; + struct wmi_cfg_rx_chain_done_event evt; + } __packed evt; + + vring->size = WIL6210_RX_RING_SIZE; + rc = wil_vring_alloc(wil, vring); + if (rc) + return rc; + + cmd.rx_sw_ring.ring_mem_base = cpu_to_le64(vring->pa); + cmd.rx_sw_ring.ring_size = cpu_to_le16(vring->size); + if (wdev->iftype == NL80211_IFTYPE_MONITOR) { + struct ieee80211_channel *ch = wdev->preset_chandef.chan; + + cmd.sniffer_cfg.mode = cpu_to_le32(WMI_SNIFFER_ON); + if (ch) + cmd.sniffer_cfg.channel = ch->hw_value - 1; + cmd.sniffer_cfg.phy_info_mode = + cpu_to_le32(ndev->type == ARPHRD_IEEE80211_RADIOTAP); + cmd.sniffer_cfg.phy_support = + cpu_to_le32((wil->monitor_flags & MONITOR_FLAG_CONTROL) + ? WMI_SNIFFER_CP : WMI_SNIFFER_DP); + } + /* typical time for secure PCP is 840ms */ + rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd), + WMI_CFG_RX_CHAIN_DONE_EVENTID, &evt, sizeof(evt), 2000); + if (rc) + goto err_free; + + vring->hwtail = le32_to_cpu(evt.evt.rx_ring_tail_ptr); + + wil_dbg(wil, "Rx init: status %d tail 0x%08x\n", + le32_to_cpu(evt.evt.status), vring->hwtail); + + rc = wil_rx_refill(wil, vring->size); + if (rc) + goto err_free; + + return 0; + err_free: + wil_vring_free(wil, vring, 0); + + return rc; +} + +void wil_rx_fini(struct wil6210_priv *wil) +{ + struct vring *vring = &wil->vring_rx; + + if (vring->va) { + int rc; + struct wmi_cfg_rx_chain_cmd cmd = { + .action = cpu_to_le32(WMI_RX_CHAIN_DEL), + .rx_sw_ring = { + .max_mpdu_size = cpu_to_le16(RX_BUF_LEN), + }, + }; + struct { + struct wil6210_mbox_hdr_wmi wmi; + struct wmi_cfg_rx_chain_done_event cfg; + } __packed wmi_rx_cfg_reply; + + rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd), + WMI_CFG_RX_CHAIN_DONE_EVENTID, + &wmi_rx_cfg_reply, sizeof(wmi_rx_cfg_reply), + 100); + wil_vring_free(wil, vring, 0); + } +} + +int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size, + int cid, int tid) +{ + int rc; + struct wmi_vring_cfg_cmd cmd = { + .action = cpu_to_le32(WMI_VRING_CMD_ADD), + .vring_cfg = { + .tx_sw_ring = { + .max_mpdu_size = cpu_to_le16(TX_BUF_LEN), + }, + .ringid = id, + .cidxtid = (cid & 0xf) | ((tid & 0xf) << 4), + .encap_trans_type = WMI_VRING_ENC_TYPE_802_3, + .mac_ctrl = 0, + .to_resolution = 0, + .agg_max_wsize = 16, + .schd_params = { + .priority = cpu_to_le16(0), + .timeslot_us = cpu_to_le16(0xfff), + }, + }, + }; + struct { + struct wil6210_mbox_hdr_wmi wmi; + struct wmi_vring_cfg_done_event cmd; + } __packed reply; + struct vring *vring = &wil->vring_tx[id]; + + if (vring->va) { + wil_err(wil, "Tx ring [%d] already allocated\n", id); + rc = -EINVAL; + goto out; + } + + vring->size = size; + rc = wil_vring_alloc(wil, vring); + if (rc) + goto out; + + cmd.vring_cfg.tx_sw_ring.ring_mem_base = cpu_to_le64(vring->pa); + cmd.vring_cfg.tx_sw_ring.ring_size = cpu_to_le16(vring->size); + + rc = wmi_call(wil, WMI_VRING_CFG_CMDID, &cmd, sizeof(cmd), + WMI_VRING_CFG_DONE_EVENTID, &reply, sizeof(reply), 100); + if (rc) + goto out_free; + + if (reply.cmd.status != WMI_VRING_CFG_SUCCESS) { + wil_err(wil, "Tx config failed, status 0x%02x\n", + reply.cmd.status); + goto out_free; + } + vring->hwtail = le32_to_cpu(reply.cmd.tx_vring_tail_ptr); + + return 0; + out_free: + wil_vring_free(wil, vring, 1); + out: + + return rc; +} + +void wil_vring_fini_tx(struct wil6210_priv *wil, int id) +{ + struct vring *vring = &wil->vring_tx[id]; + + if (!vring->va) + return; + + wil_vring_free(wil, vring, 1); +} + +static struct vring *wil_find_tx_vring(struct wil6210_priv *wil, + struct sk_buff *skb) +{ + struct vring *v = &wil->vring_tx[0]; + + if (v->va) + return v; + + return NULL; +} + +static int wil_tx_desc_map(volatile struct vring_tx_desc *d, + dma_addr_t pa, u32 len) +{ + d->dma.addr_low = lower_32_bits(pa); + d->dma.addr_high = (u16)upper_32_bits(pa); + d->dma.ip_length = 0; + /* 0..6: mac_length; 7:ip_version 0-IP6 1-IP4*/ + d->dma.b11 = 0/*14 | BIT(7)*/; + d->dma.error = 0; + d->dma.status = 0; /* BIT(0) should be 0 for HW_OWNED */ + d->dma.length = len; + d->dma.d0 = 0; + d->mac.d[0] = 0; + d->mac.d[1] = 0; + d->mac.d[2] = 0; + d->mac.ucode_cmd = 0; + /* use dst index 0 */ + d->mac.d[1] |= BIT(MAC_CFG_DESC_TX_1_DST_INDEX_EN_POS) | + (0 << MAC_CFG_DESC_TX_1_DST_INDEX_POS); + /* translation type: 0 - bypass; 1 - 802.3; 2 - native wifi */ + d->mac.d[2] = BIT(MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_POS) | + (1 << MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_POS); + + return 0; +} + +static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring, + struct sk_buff *skb) +{ + struct device *dev = wil_to_dev(wil); + volatile struct vring_tx_desc *d; + u32 swhead = vring->swhead; + int avail = wil_vring_avail_tx(vring); + int nr_frags = skb_shinfo(skb)->nr_frags; + uint f; + int vring_index = vring - wil->vring_tx; + uint i = swhead; + dma_addr_t pa; + + wil_dbg_TXRX(wil, "%s()\n", __func__); + + if (avail < vring->size/8) + netif_tx_stop_all_queues(wil_to_ndev(wil)); + if (avail < 1 + nr_frags) { + wil_err(wil, "Tx ring full. No space for %d fragments\n", + 1 + nr_frags); + return -ENOMEM; + } + d = &(vring->va[i].tx); + + /* FIXME FW can accept only unicast frames for the peer */ + memcpy(skb->data, wil->dst_addr[vring_index], ETH_ALEN); + + pa = dma_map_single(dev, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); + + wil_dbg_TXRX(wil, "Tx skb %d bytes %p -> %#08llx\n", skb_headlen(skb), + skb->data, (unsigned long long)pa); + wil_hex_dump_TXRX("Tx ", DUMP_PREFIX_OFFSET, 16, 1, + skb->data, skb_headlen(skb), false); + + if (unlikely(dma_mapping_error(dev, pa))) + return -EINVAL; + /* 1-st segment */ + wil_tx_desc_map(d, pa, skb_headlen(skb)); + d->mac.d[2] |= ((nr_frags + 1) << + MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_POS); + /* middle segments */ + for (f = 0; f < nr_frags; f++) { + const struct skb_frag_struct *frag = + &skb_shinfo(skb)->frags[f]; + int len = skb_frag_size(frag); + i = (swhead + f + 1) % vring->size; + d = &(vring->va[i].tx); + pa = skb_frag_dma_map(dev, frag, 0, skb_frag_size(frag), + DMA_TO_DEVICE); + if (unlikely(dma_mapping_error(dev, pa))) + goto dma_error; + wil_tx_desc_map(d, pa, len); + vring->ctx[i] = NULL; + } + /* for the last seg only */ + d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_CMD_EOP_POS); + d->dma.d0 |= BIT(9); /* BUG: undocumented bit */ + d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_CMD_DMA_IT_POS); + d->dma.d0 |= (vring_index << DMA_CFG_DESC_TX_0_QID_POS); + + wil_hex_dump_TXRX("Tx ", DUMP_PREFIX_NONE, 32, 4, + (const void *)d, sizeof(*d), false); + + /* advance swhead */ + wil_vring_advance_head(vring, nr_frags + 1); + wil_dbg_TXRX(wil, "Tx swhead %d -> %d\n", swhead, vring->swhead); + iowrite32(vring->swhead, wil->csr + HOSTADDR(vring->hwtail)); + /* hold reference to skb + * to prevent skb release before accounting + * in case of immediate "tx done" + */ + vring->ctx[i] = skb_get(skb); + + return 0; + dma_error: + /* unmap what we have mapped */ + /* Note: increment @f to operate with positive index */ + for (f++; f > 0; f--) { + i = (swhead + f) % vring->size; + d = &(vring->va[i].tx); + d->dma.status = TX_DMA_STATUS_DU; + pa = d->dma.addr_low | ((u64)d->dma.addr_high << 32); + if (vring->ctx[i]) + dma_unmap_single(dev, pa, d->dma.length, DMA_TO_DEVICE); + else + dma_unmap_page(dev, pa, d->dma.length, DMA_TO_DEVICE); + } + + return -EINVAL; +} + + +netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev) +{ + struct wil6210_priv *wil = ndev_to_wil(ndev); + struct vring *vring; + int rc; + + wil_dbg_TXRX(wil, "%s()\n", __func__); + if (!test_bit(wil_status_fwready, &wil->status)) { + wil_err(wil, "FW not ready\n"); + goto drop; + } + if (!test_bit(wil_status_fwconnected, &wil->status)) { + wil_err(wil, "FW not connected\n"); + goto drop; + } + if (wil->wdev->iftype == NL80211_IFTYPE_MONITOR) { + wil_err(wil, "Xmit in monitor mode not supported\n"); + goto drop; + } + if (skb->protocol == cpu_to_be16(ETH_P_PAE)) { + rc = wmi_tx_eapol(wil, skb); + } else { + /* find vring */ + vring = wil_find_tx_vring(wil, skb); + if (!vring) { + wil_err(wil, "No Tx VRING available\n"); + goto drop; + } + /* set up vring entry */ + rc = wil_tx_vring(wil, vring, skb); + } + switch (rc) { + case 0: + ndev->stats.tx_packets++; + ndev->stats.tx_bytes += skb->len; + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + case -ENOMEM: + return NETDEV_TX_BUSY; + default: + ; /* goto drop; */ + break; + } + drop: + netif_tx_stop_all_queues(ndev); + ndev->stats.tx_dropped++; + dev_kfree_skb_any(skb); + + return NET_XMIT_DROP; +} + +/** + * Clean up transmitted skb's from the Tx VRING + * + * Safe to call from IRQ + */ +void wil_tx_complete(struct wil6210_priv *wil, int ringid) +{ + struct device *dev = wil_to_dev(wil); + struct vring *vring = &wil->vring_tx[ringid]; + + if (!vring->va) { + wil_err(wil, "Tx irq[%d]: vring not initialized\n", ringid); + return; + } + + wil_dbg_TXRX(wil, "%s(%d)\n", __func__, ringid); + + while (!wil_vring_is_empty(vring)) { + volatile struct vring_tx_desc *d = &vring->va[vring->swtail].tx; + dma_addr_t pa; + struct sk_buff *skb; + if (!(d->dma.status & TX_DMA_STATUS_DU)) + break; + + wil_dbg_TXRX(wil, + "Tx[%3d] : %d bytes, status 0x%02x err 0x%02x\n", + vring->swtail, d->dma.length, d->dma.status, + d->dma.error); + wil_hex_dump_TXRX("TxC ", DUMP_PREFIX_NONE, 32, 4, + (const void *)d, sizeof(*d), false); + + pa = d->dma.addr_low | ((u64)d->dma.addr_high << 32); + skb = vring->ctx[vring->swtail]; + if (skb) { + dma_unmap_single(dev, pa, d->dma.length, DMA_TO_DEVICE); + dev_kfree_skb_any(skb); + vring->ctx[vring->swtail] = NULL; + } else { + dma_unmap_page(dev, pa, d->dma.length, DMA_TO_DEVICE); + } + d->dma.addr_low = 0; + d->dma.addr_high = 0; + d->dma.length = 0; + d->dma.status = TX_DMA_STATUS_DU; + vring->swtail = wil_vring_next_tail(vring); + } + if (wil_vring_avail_tx(vring) > vring->size/4) + netif_tx_wake_all_queues(wil_to_ndev(wil)); +} diff --git a/drivers/net/wireless/ath/wil6210/txrx.h b/drivers/net/wireless/ath/wil6210/txrx.h new file mode 100644 index 000000000000..45a61f597c5c --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/txrx.h @@ -0,0 +1,362 @@ +/* + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef WIL6210_TXRX_H +#define WIL6210_TXRX_H + +#define BUF_SW_OWNED (1) +#define BUF_HW_OWNED (0) + +/* size of max. Rx packet */ +#define RX_BUF_LEN (2048) +#define TX_BUF_LEN (2048) +/* how many bytes to reserve for rtap header? */ +#define WIL6210_RTAP_SIZE (128) + +/* Tx/Rx path */ +/* + * Tx descriptor - MAC part + * [dword 0] + * bit 0.. 9 : lifetime_expiry_value:10 + * bit 10 : interrup_en:1 + * bit 11 : status_en:1 + * bit 12..13 : txss_override:2 + * bit 14 : timestamp_insertion:1 + * bit 15 : duration_preserve:1 + * bit 16..21 : reserved0:6 + * bit 22..26 : mcs_index:5 + * bit 27 : mcs_en:1 + * bit 28..29 : reserved1:2 + * bit 30 : reserved2:1 + * bit 31 : sn_preserved:1 + * [dword 1] + * bit 0.. 3 : pkt_mode:4 + * bit 4 : pkt_mode_en:1 + * bit 5.. 7 : reserved0:3 + * bit 8..13 : reserved1:6 + * bit 14 : reserved2:1 + * bit 15 : ack_policy_en:1 + * bit 16..19 : dst_index:4 + * bit 20 : dst_index_en:1 + * bit 21..22 : ack_policy:2 + * bit 23 : lifetime_en:1 + * bit 24..30 : max_retry:7 + * bit 31 : max_retry_en:1 + * [dword 2] + * bit 0.. 7 : num_of_descriptors:8 + * bit 8..17 : reserved:10 + * bit 18..19 : l2_translation_type:2 + * bit 20 : snap_hdr_insertion_en:1 + * bit 21 : vlan_removal_en:1 + * bit 22..31 : reserved0:10 + * [dword 3] + * bit 0.. 31: ucode_cmd:32 + */ +struct vring_tx_mac { + u32 d[3]; + u32 ucode_cmd; +} __packed; + +/* TX MAC Dword 0 */ +#define MAC_CFG_DESC_TX_0_LIFETIME_EXPIRY_VALUE_POS 0 +#define MAC_CFG_DESC_TX_0_LIFETIME_EXPIRY_VALUE_LEN 10 +#define MAC_CFG_DESC_TX_0_LIFETIME_EXPIRY_VALUE_MSK 0x3FF + +#define MAC_CFG_DESC_TX_0_INTERRUP_EN_POS 10 +#define MAC_CFG_DESC_TX_0_INTERRUP_EN_LEN 1 +#define MAC_CFG_DESC_TX_0_INTERRUP_EN_MSK 0x400 + +#define MAC_CFG_DESC_TX_0_STATUS_EN_POS 11 +#define MAC_CFG_DESC_TX_0_STATUS_EN_LEN 1 +#define MAC_CFG_DESC_TX_0_STATUS_EN_MSK 0x800 + +#define MAC_CFG_DESC_TX_0_TXSS_OVERRIDE_POS 12 +#define MAC_CFG_DESC_TX_0_TXSS_OVERRIDE_LEN 2 +#define MAC_CFG_DESC_TX_0_TXSS_OVERRIDE_MSK 0x3000 + +#define MAC_CFG_DESC_TX_0_TIMESTAMP_INSERTION_POS 14 +#define MAC_CFG_DESC_TX_0_TIMESTAMP_INSERTION_LEN 1 +#define MAC_CFG_DESC_TX_0_TIMESTAMP_INSERTION_MSK 0x4000 + +#define MAC_CFG_DESC_TX_0_DURATION_PRESERVE_POS 15 +#define MAC_CFG_DESC_TX_0_DURATION_PRESERVE_LEN 1 +#define MAC_CFG_DESC_TX_0_DURATION_PRESERVE_MSK 0x8000 + +#define MAC_CFG_DESC_TX_0_MCS_INDEX_POS 22 +#define MAC_CFG_DESC_TX_0_MCS_INDEX_LEN 5 +#define MAC_CFG_DESC_TX_0_MCS_INDEX_MSK 0x7C00000 + +#define MAC_CFG_DESC_TX_0_MCS_EN_POS 27 +#define MAC_CFG_DESC_TX_0_MCS_EN_LEN 1 +#define MAC_CFG_DESC_TX_0_MCS_EN_MSK 0x8000000 + +#define MAC_CFG_DESC_TX_0_SN_PRESERVED_POS 31 +#define MAC_CFG_DESC_TX_0_SN_PRESERVED_LEN 1 +#define MAC_CFG_DESC_TX_0_SN_PRESERVED_MSK 0x80000000 + +/* TX MAC Dword 1 */ +#define MAC_CFG_DESC_TX_1_PKT_MODE_POS 0 +#define MAC_CFG_DESC_TX_1_PKT_MODE_LEN 4 +#define MAC_CFG_DESC_TX_1_PKT_MODE_MSK 0xF + +#define MAC_CFG_DESC_TX_1_PKT_MODE_EN_POS 4 +#define MAC_CFG_DESC_TX_1_PKT_MODE_EN_LEN 1 +#define MAC_CFG_DESC_TX_1_PKT_MODE_EN_MSK 0x10 + +#define MAC_CFG_DESC_TX_1_ACK_POLICY_EN_POS 15 +#define MAC_CFG_DESC_TX_1_ACK_POLICY_EN_LEN 1 +#define MAC_CFG_DESC_TX_1_ACK_POLICY_EN_MSK 0x8000 + +#define MAC_CFG_DESC_TX_1_DST_INDEX_POS 16 +#define MAC_CFG_DESC_TX_1_DST_INDEX_LEN 4 +#define MAC_CFG_DESC_TX_1_DST_INDEX_MSK 0xF0000 + +#define MAC_CFG_DESC_TX_1_DST_INDEX_EN_POS 20 +#define MAC_CFG_DESC_TX_1_DST_INDEX_EN_LEN 1 +#define MAC_CFG_DESC_TX_1_DST_INDEX_EN_MSK 0x100000 + +#define MAC_CFG_DESC_TX_1_ACK_POLICY_POS 21 +#define MAC_CFG_DESC_TX_1_ACK_POLICY_LEN 2 +#define MAC_CFG_DESC_TX_1_ACK_POLICY_MSK 0x600000 + +#define MAC_CFG_DESC_TX_1_LIFETIME_EN_POS 23 +#define MAC_CFG_DESC_TX_1_LIFETIME_EN_LEN 1 +#define MAC_CFG_DESC_TX_1_LIFETIME_EN_MSK 0x800000 + +#define MAC_CFG_DESC_TX_1_MAX_RETRY_POS 24 +#define MAC_CFG_DESC_TX_1_MAX_RETRY_LEN 7 +#define MAC_CFG_DESC_TX_1_MAX_RETRY_MSK 0x7F000000 + +#define MAC_CFG_DESC_TX_1_MAX_RETRY_EN_POS 31 +#define MAC_CFG_DESC_TX_1_MAX_RETRY_EN_LEN 1 +#define MAC_CFG_DESC_TX_1_MAX_RETRY_EN_MSK 0x80000000 + +/* TX MAC Dword 2 */ +#define MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_POS 0 +#define MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_LEN 8 +#define MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_MSK 0xFF + +#define MAC_CFG_DESC_TX_2_RESERVED_POS 8 +#define MAC_CFG_DESC_TX_2_RESERVED_LEN 10 +#define MAC_CFG_DESC_TX_2_RESERVED_MSK 0x3FF00 + +#define MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_POS 18 +#define MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_LEN 2 +#define MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_MSK 0xC0000 + +#define MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_POS 20 +#define MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_LEN 1 +#define MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_MSK 0x100000 + +#define MAC_CFG_DESC_TX_2_VLAN_REMOVAL_EN_POS 21 +#define MAC_CFG_DESC_TX_2_VLAN_REMOVAL_EN_LEN 1 +#define MAC_CFG_DESC_TX_2_VLAN_REMOVAL_EN_MSK 0x200000 + +/* TX MAC Dword 3 */ +#define MAC_CFG_DESC_TX_3_UCODE_CMD_POS 0 +#define MAC_CFG_DESC_TX_3_UCODE_CMD_LEN 32 +#define MAC_CFG_DESC_TX_3_UCODE_CMD_MSK 0xFFFFFFFF + +/* TX DMA Dword 0 */ +#define DMA_CFG_DESC_TX_0_L4_LENGTH_POS 0 +#define DMA_CFG_DESC_TX_0_L4_LENGTH_LEN 8 +#define DMA_CFG_DESC_TX_0_L4_LENGTH_MSK 0xFF + +#define DMA_CFG_DESC_TX_0_CMD_EOP_POS 8 +#define DMA_CFG_DESC_TX_0_CMD_EOP_LEN 1 +#define DMA_CFG_DESC_TX_0_CMD_EOP_MSK 0x100 + +#define DMA_CFG_DESC_TX_0_CMD_DMA_IT_POS 10 +#define DMA_CFG_DESC_TX_0_CMD_DMA_IT_LEN 1 +#define DMA_CFG_DESC_TX_0_CMD_DMA_IT_MSK 0x400 + +#define DMA_CFG_DESC_TX_0_SEGMENT_BUF_DETAILS_POS 11 +#define DMA_CFG_DESC_TX_0_SEGMENT_BUF_DETAILS_LEN 2 +#define DMA_CFG_DESC_TX_0_SEGMENT_BUF_DETAILS_MSK 0x1800 + +#define DMA_CFG_DESC_TX_0_TCP_SEG_EN_POS 13 +#define DMA_CFG_DESC_TX_0_TCP_SEG_EN_LEN 1 +#define DMA_CFG_DESC_TX_0_TCP_SEG_EN_MSK 0x2000 + +#define DMA_CFG_DESC_TX_0_IPV4_CHECKSUM_EN_POS 14 +#define DMA_CFG_DESC_TX_0_IPV4_CHECKSUM_EN_LEN 1 +#define DMA_CFG_DESC_TX_0_IPV4_CHECKSUM_EN_MSK 0x4000 + +#define DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_POS 15 +#define DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_LEN 1 +#define DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_MSK 0x8000 + +#define DMA_CFG_DESC_TX_0_QID_POS 16 +#define DMA_CFG_DESC_TX_0_QID_LEN 5 +#define DMA_CFG_DESC_TX_0_QID_MSK 0x1F0000 + +#define DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_POS 21 +#define DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_LEN 1 +#define DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_MSK 0x200000 + +#define DMA_CFG_DESC_TX_0_L4_TYPE_POS 30 +#define DMA_CFG_DESC_TX_0_L4_TYPE_LEN 2 +#define DMA_CFG_DESC_TX_0_L4_TYPE_MSK 0xC0000000 + + +#define TX_DMA_STATUS_DU BIT(0) + +struct vring_tx_dma { + u32 d0; + u32 addr_low; + u16 addr_high; + u8 ip_length; + u8 b11; /* 0..6: mac_length; 7:ip_version */ + u8 error; /* 0..2: err; 3..7: reserved; */ + u8 status; /* 0: used; 1..7; reserved */ + u16 length; +} __packed; + +/* + * Rx descriptor - MAC part + * [dword 0] + * bit 0.. 3 : tid:4 The QoS (b3-0) TID Field + * bit 4.. 6 : connection_id:3 :The Source index that was found during + * Parsing the TA. This field is used to define the source of the packet + * bit 7 : reserved:1 + * bit 8.. 9 : mac_id:2 : The MAC virtual Ring number (always zero) + * bit 10..11 : frame_type:2 : The FC Control (b3-2) - MPDU Type + * (management, data, control and extension) + * bit 12..15 : frame_subtype:4 : The FC Control (b7-4) - Frame Subtype + * bit 16..27 : seq_number:12 The received Sequence number field + * bit 28..31 : extended:4 extended subtype + * [dword 1] + * bit 0.. 3 : reserved + * bit 4.. 5 : key_id:2 + * bit 6 : decrypt_bypass:1 + * bit 7 : security:1 + * bit 8.. 9 : ds_bits:2 + * bit 10 : a_msdu_present:1 from qos header + * bit 11 : a_msdu_type:1 from qos header + * bit 12 : a_mpdu:1 part of AMPDU aggregation + * bit 13 : broadcast:1 + * bit 14 : mutlicast:1 + * bit 15 : reserved:1 + * bit 16..20 : rx_mac_qid:5 The Queue Identifier that the packet + * is received from + * bit 21..24 : mcs:4 + * bit 25..28 : mic_icr:4 + * bit 29..31 : reserved:3 + * [dword 2] + * bit 0.. 2 : time_slot:3 The timeslot that the MPDU is received + * bit 3 : fc_protocol_ver:1 The FC Control (b0) - Protocol Version + * bit 4 : fc_order:1 The FC Control (b15) -Order + * bit 5.. 7 : qos_ack_policy:3 The QoS (b6-5) ack policy Field + * bit 8 : esop:1 The QoS (b4) ESOP field + * bit 9 : qos_rdg_more_ppdu:1 The QoS (b9) RDG field + * bit 10..14 : qos_reserved:5 The QoS (b14-10) Reserved field + * bit 15 : qos_ac_constraint:1 + * bit 16..31 : pn_15_0:16 low 2 bytes of PN + * [dword 3] + * bit 0..31 : pn_47_16:32 high 4 bytes of PN + */ +struct vring_rx_mac { + u32 d0; + u32 d1; + u16 w4; + u16 pn_15_0; + u32 pn_47_16; +} __packed; + +/* + * Rx descriptor - DMA part + * [dword 0] + * bit 0.. 7 : l4_length:8 layer 4 length + * bit 8.. 9 : reserved:2 + * bit 10 : cmd_dma_it:1 + * bit 11..15 : reserved:5 + * bit 16..29 : phy_info_length:14 + * bit 30..31 : l4_type:2 valid if the L4I bit is set in the status field + * [dword 1] + * bit 0..31 : addr_low:32 The payload buffer low address + * [dword 2] + * bit 0..15 : addr_high:16 The payload buffer high address + * bit 16..23 : ip_length:8 + * bit 24..30 : mac_length:7 + * bit 31 : ip_version:1 + * [dword 3] + * [byte 12] error + * [byte 13] status + * bit 0 : du:1 + * bit 1 : eop:1 + * bit 2 : error:1 + * bit 3 : mi:1 + * bit 4 : l3_identified:1 + * bit 5 : l4_identified:1 + * bit 6 : phy_info_included:1 + * bit 7 : reserved:1 + * [word 7] length + * + */ + +#define RX_DMA_D0_CMD_DMA_IT BIT(10) + +#define RX_DMA_STATUS_DU BIT(0) +#define RX_DMA_STATUS_ERROR BIT(2) +#define RX_DMA_STATUS_PHY_INFO BIT(6) + +struct vring_rx_dma { + u32 d0; + u32 addr_low; + u16 addr_high; + u8 ip_length; + u8 b11; + u8 error; + u8 status; + u16 length; +} __packed; + +struct vring_tx_desc { + struct vring_tx_mac mac; + struct vring_tx_dma dma; +} __packed; + +struct vring_rx_desc { + struct vring_rx_mac mac; + struct vring_rx_dma dma; +} __packed; + +union vring_desc { + struct vring_tx_desc tx; + struct vring_rx_desc rx; +} __packed; + +static inline int wil_rxdesc_phy_length(volatile struct vring_rx_desc *d) +{ + return WIL_GET_BITS(d->dma.d0, 16, 29); +} + +static inline int wil_rxdesc_mcs(volatile struct vring_rx_desc *d) +{ + return WIL_GET_BITS(d->mac.d1, 21, 24); +} + +static inline int wil_rxdesc_ds_bits(volatile struct vring_rx_desc *d) +{ + return WIL_GET_BITS(d->mac.d1, 8, 9); +} + +static inline int wil_rxdesc_ftype(volatile struct vring_rx_desc *d) +{ + return WIL_GET_BITS(d->mac.d0, 10, 11); +} + +#endif /* WIL6210_TXRX_H */ diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h new file mode 100644 index 000000000000..9bcfffa4006c --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -0,0 +1,363 @@ +/* + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __WIL6210_H__ +#define __WIL6210_H__ + +#include +#include +#include + +#include "dbg_hexdump.h" + +#define WIL_NAME "wil6210" + +/** + * extract bits [@b0:@b1] (inclusive) from the value @x + * it should be @b0 <= @b1, or result is incorrect + */ +static inline u32 WIL_GET_BITS(u32 x, int b0, int b1) +{ + return (x >> b0) & ((1 << (b1 - b0 + 1)) - 1); +} + +#define WIL6210_MEM_SIZE (2*1024*1024UL) + +#define WIL6210_TX_QUEUES (4) + +#define WIL6210_RX_RING_SIZE (128) +#define WIL6210_TX_RING_SIZE (128) +#define WIL6210_MAX_TX_RINGS (24) + +/* Hardware definitions begin */ + +/* + * Mapping + * RGF File | Host addr | FW addr + * | | + * user_rgf | 0x000000 | 0x880000 + * dma_rgf | 0x001000 | 0x881000 + * pcie_rgf | 0x002000 | 0x882000 + * | | + */ + +/* Where various structures placed in host address space */ +#define WIL6210_FW_HOST_OFF (0x880000UL) + +#define HOSTADDR(fwaddr) (fwaddr - WIL6210_FW_HOST_OFF) + +/* + * Interrupt control registers block + * + * each interrupt controlled by the same bit in all registers + */ +struct RGF_ICR { + u32 ICC; /* Cause Control, RW: 0 - W1C, 1 - COR */ + u32 ICR; /* Cause, W1C/COR depending on ICC */ + u32 ICM; /* Cause masked (ICR & ~IMV), W1C/COR depending on ICC */ + u32 ICS; /* Cause Set, WO */ + u32 IMV; /* Mask, RW+S/C */ + u32 IMS; /* Mask Set, write 1 to set */ + u32 IMC; /* Mask Clear, write 1 to clear */ +} __packed; + +/* registers - FW addresses */ +#define RGF_USER_USER_SCRATCH_PAD (0x8802bc) +#define RGF_USER_USER_ICR (0x880b4c) /* struct RGF_ICR */ + #define BIT_USER_USER_ICR_SW_INT_2 BIT(18) +#define RGF_USER_CLKS_CTL_SW_RST_MASK_0 (0x880b14) +#define RGF_USER_MAC_CPU_0 (0x8801fc) +#define RGF_USER_USER_CPU_0 (0x8801e0) +#define RGF_USER_CLKS_CTL_SW_RST_VEC_0 (0x880b04) +#define RGF_USER_CLKS_CTL_SW_RST_VEC_1 (0x880b08) +#define RGF_USER_CLKS_CTL_SW_RST_VEC_2 (0x880b0c) +#define RGF_USER_CLKS_CTL_SW_RST_VEC_3 (0x880b10) + +#define RGF_DMA_PSEUDO_CAUSE (0x881c68) +#define RGF_DMA_PSEUDO_CAUSE_MASK_SW (0x881c6c) +#define RGF_DMA_PSEUDO_CAUSE_MASK_FW (0x881c70) + #define BIT_DMA_PSEUDO_CAUSE_RX BIT(0) + #define BIT_DMA_PSEUDO_CAUSE_TX BIT(1) + #define BIT_DMA_PSEUDO_CAUSE_MISC BIT(2) + +#define RGF_DMA_EP_TX_ICR (0x881bb4) /* struct RGF_ICR */ + #define BIT_DMA_EP_TX_ICR_TX_DONE BIT(0) + #define BIT_DMA_EP_TX_ICR_TX_DONE_N(n) BIT(n+1) /* n = [0..23] */ +#define RGF_DMA_EP_RX_ICR (0x881bd0) /* struct RGF_ICR */ + #define BIT_DMA_EP_RX_ICR_RX_DONE BIT(0) +#define RGF_DMA_EP_MISC_ICR (0x881bec) /* struct RGF_ICR */ + #define BIT_DMA_EP_MISC_ICR_RX_HTRSH BIT(0) + #define BIT_DMA_EP_MISC_ICR_TX_NO_ACT BIT(1) + #define BIT_DMA_EP_MISC_ICR_FW_INT0 BIT(28) + #define BIT_DMA_EP_MISC_ICR_FW_INT1 BIT(29) + +/* Interrupt moderation control */ +#define RGF_DMA_ITR_CNT_TRSH (0x881c5c) +#define RGF_DMA_ITR_CNT_DATA (0x881c60) +#define RGF_DMA_ITR_CNT_CRL (0x881C64) + #define BIT_DMA_ITR_CNT_CRL_EN BIT(0) + #define BIT_DMA_ITR_CNT_CRL_EXT_TICK BIT(1) + #define BIT_DMA_ITR_CNT_CRL_FOREVER BIT(2) + #define BIT_DMA_ITR_CNT_CRL_CLR BIT(3) + #define BIT_DMA_ITR_CNT_CRL_REACH_TRSH BIT(4) + +/* popular locations */ +#define HOST_MBOX HOSTADDR(RGF_USER_USER_SCRATCH_PAD) +#define HOST_SW_INT (HOSTADDR(RGF_USER_USER_ICR) + \ + offsetof(struct RGF_ICR, ICS)) +#define SW_INT_MBOX BIT_USER_USER_ICR_SW_INT_2 + +/* ISR register bits */ +#define ISR_MISC_FW_READY BIT_DMA_EP_MISC_ICR_FW_INT0 +#define ISR_MISC_MBOX_EVT BIT_DMA_EP_MISC_ICR_FW_INT1 + +/* Hardware definitions end */ + +struct wil6210_mbox_ring { + u32 base; + u16 entry_size; /* max. size of mbox entry, incl. all headers */ + u16 size; + u32 tail; + u32 head; +} __packed; + +struct wil6210_mbox_ring_desc { + __le32 sync; + __le32 addr; +} __packed; + +/* at HOST_OFF_WIL6210_MBOX_CTL */ +struct wil6210_mbox_ctl { + struct wil6210_mbox_ring tx; + struct wil6210_mbox_ring rx; +} __packed; + +struct wil6210_mbox_hdr { + __le16 seq; + __le16 len; /* payload, bytes after this header */ + __le16 type; + u8 flags; + u8 reserved; +} __packed; + +#define WIL_MBOX_HDR_TYPE_WMI (0) + +/* max. value for wil6210_mbox_hdr.len */ +#define MAX_MBOXITEM_SIZE (240) + +struct wil6210_mbox_hdr_wmi { + u8 reserved0[2]; + __le16 id; + __le16 info1; /* bits [0..3] - device_id, rest - unused */ + u8 reserved1[2]; +} __packed; + +struct pending_wmi_event { + struct list_head list; + struct { + struct wil6210_mbox_hdr hdr; + struct wil6210_mbox_hdr_wmi wmi; + u8 data[0]; + } __packed event; +}; + +union vring_desc; + +struct vring { + dma_addr_t pa; + volatile union vring_desc *va; /* vring_desc[size], WriteBack by DMA */ + u16 size; /* number of vring_desc elements */ + u32 swtail; + u32 swhead; + u32 hwtail; /* write here to inform hw */ + void **ctx; /* void *ctx[size] - software context */ +}; + +enum { /* for wil6210_priv.status */ + wil_status_fwready = 0, + wil_status_fwconnected, + wil_status_dontscan, + wil_status_irqen, /* FIXME: interrupts enabled - for debug */ +}; + +struct pci_dev; + +struct wil6210_stats { + u64 tsf; + u32 snr; + u16 last_mcs_rx; + u16 bf_mcs; /* last BF, used for Tx */ + u16 my_rx_sector; + u16 my_tx_sector; + u16 peer_rx_sector; + u16 peer_tx_sector; +}; + +struct wil6210_priv { + struct pci_dev *pdev; + int n_msi; + struct wireless_dev *wdev; + void __iomem *csr; + ulong status; + /* profile */ + u32 monitor_flags; + u32 secure_pcp; /* create secure PCP? */ + int sinfo_gen; + /* cached ISR registers */ + u32 isr_misc; + /* mailbox related */ + struct mutex wmi_mutex; + struct wil6210_mbox_ctl mbox_ctl; + struct completion wmi_ready; + u16 wmi_seq; + u16 reply_id; /**< wait for this WMI event */ + void *reply_buf; + u16 reply_size; + struct workqueue_struct *wmi_wq; /* for deferred calls */ + struct work_struct wmi_event_worker; + struct workqueue_struct *wmi_wq_conn; /* for connect worker */ + struct work_struct wmi_connect_worker; + struct work_struct disconnect_worker; + struct timer_list connect_timer; + int pending_connect_cid; + struct list_head pending_wmi_ev; + /* + * protect pending_wmi_ev + * - fill in IRQ from wil6210_irq_misc, + * - consumed in thread by wmi_event_worker + */ + spinlock_t wmi_ev_lock; + /* DMA related */ + struct vring vring_rx; + struct vring vring_tx[WIL6210_MAX_TX_RINGS]; + u8 dst_addr[WIL6210_MAX_TX_RINGS][ETH_ALEN]; + /* scan */ + struct cfg80211_scan_request *scan_request; + + struct mutex mutex; /* for wil6210_priv access in wil_{up|down} */ + /* statistics */ + struct wil6210_stats stats; + /* debugfs */ + struct dentry *debug; + struct debugfs_blob_wrapper fw_code_blob; + struct debugfs_blob_wrapper fw_data_blob; + struct debugfs_blob_wrapper fw_peri_blob; + struct debugfs_blob_wrapper uc_code_blob; + struct debugfs_blob_wrapper uc_data_blob; + struct debugfs_blob_wrapper rgf_blob; +}; + +#define wil_to_wiphy(i) (i->wdev->wiphy) +#define wil_to_dev(i) (wiphy_dev(wil_to_wiphy(i))) +#define wiphy_to_wil(w) (struct wil6210_priv *)(wiphy_priv(w)) +#define wil_to_wdev(i) (i->wdev) +#define wdev_to_wil(w) (struct wil6210_priv *)(wdev_priv(w)) +#define wil_to_ndev(i) (wil_to_wdev(i)->netdev) +#define ndev_to_wil(n) (wdev_to_wil(n->ieee80211_ptr)) + +#define wil_dbg(wil, fmt, arg...) netdev_dbg(wil_to_ndev(wil), fmt, ##arg) +#define wil_info(wil, fmt, arg...) netdev_info(wil_to_ndev(wil), fmt, ##arg) +#define wil_err(wil, fmt, arg...) netdev_err(wil_to_ndev(wil), fmt, ##arg) + +#define wil_dbg_IRQ(wil, fmt, arg...) wil_dbg(wil, "DBG[ IRQ]" fmt, ##arg) +#define wil_dbg_TXRX(wil, fmt, arg...) wil_dbg(wil, "DBG[TXRX]" fmt, ##arg) +#define wil_dbg_WMI(wil, fmt, arg...) wil_dbg(wil, "DBG[ WMI]" fmt, ##arg) + +#define wil_hex_dump_TXRX(prefix_str, prefix_type, rowsize, \ + groupsize, buf, len, ascii) \ + wil_print_hex_dump_debug("DBG[TXRX]" prefix_str,\ + prefix_type, rowsize, \ + groupsize, buf, len, ascii) + +#define wil_hex_dump_WMI(prefix_str, prefix_type, rowsize, \ + groupsize, buf, len, ascii) \ + wil_print_hex_dump_debug("DBG[ WMI]" prefix_str,\ + prefix_type, rowsize, \ + groupsize, buf, len, ascii) + +void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src, + size_t count); +void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src, + size_t count); + +void *wil_if_alloc(struct device *dev, void __iomem *csr); +void wil_if_free(struct wil6210_priv *wil); +int wil_if_add(struct wil6210_priv *wil); +void wil_if_remove(struct wil6210_priv *wil); +int wil_priv_init(struct wil6210_priv *wil); +void wil_priv_deinit(struct wil6210_priv *wil); +int wil_reset(struct wil6210_priv *wil); +void wil_link_on(struct wil6210_priv *wil); +void wil_link_off(struct wil6210_priv *wil); +int wil_up(struct wil6210_priv *wil); +int wil_down(struct wil6210_priv *wil); +void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r); + +void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr); +void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr); +int wmi_read_hdr(struct wil6210_priv *wil, __le32 ptr, + struct wil6210_mbox_hdr *hdr); +int wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len); +void wmi_recv_cmd(struct wil6210_priv *wil); +int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len, + u16 reply_id, void *reply, u8 reply_size, int to_msec); +void wmi_connect_worker(struct work_struct *work); +void wmi_event_worker(struct work_struct *work); +void wmi_event_flush(struct wil6210_priv *wil); +int wmi_set_ssid(struct wil6210_priv *wil, u8 ssid_len, const void *ssid); +int wmi_get_ssid(struct wil6210_priv *wil, u8 *ssid_len, void *ssid); +int wmi_set_channel(struct wil6210_priv *wil, int channel); +int wmi_get_channel(struct wil6210_priv *wil, int *channel); +int wmi_tx_eapol(struct wil6210_priv *wil, struct sk_buff *skb); +int wmi_del_cipher_key(struct wil6210_priv *wil, u8 key_index, + const void *mac_addr); +int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index, + const void *mac_addr, int key_len, const void *key); +int wmi_echo(struct wil6210_priv *wil); +int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie); + +int wil6210_init_irq(struct wil6210_priv *wil, int irq); +void wil6210_fini_irq(struct wil6210_priv *wil, int irq); +void wil6210_disable_irq(struct wil6210_priv *wil); +void wil6210_enable_irq(struct wil6210_priv *wil); + +int wil6210_debugfs_init(struct wil6210_priv *wil); +void wil6210_debugfs_remove(struct wil6210_priv *wil); + +struct wireless_dev *wil_cfg80211_init(struct device *dev); +void wil_wdev_free(struct wil6210_priv *wil); + +int wmi_set_mac_address(struct wil6210_priv *wil, void *addr); +int wmi_set_bcon(struct wil6210_priv *wil, int bi, u8 wmi_nettype); +void wil6210_disconnect(struct wil6210_priv *wil, void *bssid); + +int wil_rx_init(struct wil6210_priv *wil); +void wil_rx_fini(struct wil6210_priv *wil); + +/* TX API */ +int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size, + int cid, int tid); +void wil_vring_fini_tx(struct wil6210_priv *wil, int id); + +netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev); +void wil_tx_complete(struct wil6210_priv *wil, int ringid); + +/* RX API */ +void wil_rx_handle(struct wil6210_priv *wil); + +int wil_iftype_nl2wmi(enum nl80211_iftype type); + +#endif /* __WIL6210_H__ */ diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c new file mode 100644 index 000000000000..12915f6e7617 --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -0,0 +1,975 @@ +/* + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include +#include +#include + +#include "wil6210.h" +#include "wmi.h" + +/** + * WMI event receiving - theory of operations + * + * When firmware about to report WMI event, it fills memory area + * in the mailbox and raises misc. IRQ. Thread interrupt handler invoked for + * the misc IRQ, function @wmi_recv_cmd called by thread IRQ handler. + * + * @wmi_recv_cmd reads event, allocates memory chunk and attaches it to the + * event list @wil->pending_wmi_ev. Then, work queue @wil->wmi_wq wakes up + * and handles events within the @wmi_event_worker. Every event get detached + * from list, processed and deleted. + * + * Purpose for this mechanism is to release IRQ thread; otherwise, + * if WMI event handling involves another WMI command flow, this 2-nd flow + * won't be completed because of blocked IRQ thread. + */ + +/** + * Addressing - theory of operations + * + * There are several buses present on the WIL6210 card. + * Same memory areas are visible at different address on + * the different busses. There are 3 main bus masters: + * - MAC CPU (ucode) + * - User CPU (firmware) + * - AHB (host) + * + * On the PCI bus, there is one BAR (BAR0) of 2Mb size, exposing + * AHB addresses starting from 0x880000 + * + * Internally, firmware uses addresses that allows faster access but + * are invisible from the host. To read from these addresses, alternative + * AHB address must be used. + * + * Memory mapping + * Linker address PCI/Host address + * 0x880000 .. 0xa80000 2Mb BAR0 + * 0x800000 .. 0x807000 0x900000 .. 0x907000 28k DCCM + * 0x840000 .. 0x857000 0x908000 .. 0x91f000 92k PERIPH + */ + +/** + * @fw_mapping provides memory remapping table + */ +static const struct { + u32 from; /* linker address - from, inclusive */ + u32 to; /* linker address - to, exclusive */ + u32 host; /* PCI/Host address - BAR0 + 0x880000 */ +} fw_mapping[] = { + {0x000000, 0x040000, 0x8c0000}, /* FW code RAM 256k */ + {0x800000, 0x808000, 0x900000}, /* FW data RAM 32k */ + {0x840000, 0x860000, 0x908000}, /* peripheral data RAM 128k/96k used */ + {0x880000, 0x88a000, 0x880000}, /* various RGF */ + {0x8c0000, 0x932000, 0x8c0000}, /* trivial mapping for upper area */ + /* + * 920000..930000 ucode code RAM + * 930000..932000 ucode data RAM + */ +}; + +/** + * return AHB address for given firmware/ucode internal (linker) address + * @x - internal address + * If address have no valid AHB mapping, return 0 + */ +static u32 wmi_addr_remap(u32 x) +{ + uint i; + + for (i = 0; i < ARRAY_SIZE(fw_mapping); i++) { + if ((x >= fw_mapping[i].from) && (x < fw_mapping[i].to)) + return x + fw_mapping[i].host - fw_mapping[i].from; + } + + return 0; +} + +/** + * Check address validity for WMI buffer; remap if needed + * @ptr - internal (linker) fw/ucode address + * + * Valid buffer should be DWORD aligned + * + * return address for accessing buffer from the host; + * if buffer is not valid, return NULL. + */ +void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr_) +{ + u32 off; + u32 ptr = le32_to_cpu(ptr_); + + if (ptr % 4) + return NULL; + + ptr = wmi_addr_remap(ptr); + if (ptr < WIL6210_FW_HOST_OFF) + return NULL; + + off = HOSTADDR(ptr); + if (off > WIL6210_MEM_SIZE - 4) + return NULL; + + return wil->csr + off; +} + +/** + * Check address validity + */ +void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr) +{ + u32 off; + + if (ptr % 4) + return NULL; + + if (ptr < WIL6210_FW_HOST_OFF) + return NULL; + + off = HOSTADDR(ptr); + if (off > WIL6210_MEM_SIZE - 4) + return NULL; + + return wil->csr + off; +} + +int wmi_read_hdr(struct wil6210_priv *wil, __le32 ptr, + struct wil6210_mbox_hdr *hdr) +{ + void __iomem *src = wmi_buffer(wil, ptr); + if (!src) + return -EINVAL; + + wil_memcpy_fromio_32(hdr, src, sizeof(*hdr)); + + return 0; +} + +static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) +{ + struct { + struct wil6210_mbox_hdr hdr; + struct wil6210_mbox_hdr_wmi wmi; + } __packed cmd = { + .hdr = { + .type = WIL_MBOX_HDR_TYPE_WMI, + .flags = 0, + .len = cpu_to_le16(sizeof(cmd.wmi) + len), + }, + .wmi = { + .id = cpu_to_le16(cmdid), + .info1 = 0, + }, + }; + struct wil6210_mbox_ring *r = &wil->mbox_ctl.tx; + struct wil6210_mbox_ring_desc d_head; + u32 next_head; + void __iomem *dst; + void __iomem *head = wmi_addr(wil, r->head); + uint retry; + + if (sizeof(cmd) + len > r->entry_size) { + wil_err(wil, "WMI size too large: %d bytes, max is %d\n", + (int)(sizeof(cmd) + len), r->entry_size); + return -ERANGE; + + } + + might_sleep(); + + if (!test_bit(wil_status_fwready, &wil->status)) { + wil_err(wil, "FW not ready\n"); + return -EAGAIN; + } + + if (!head) { + wil_err(wil, "WMI head is garbage: 0x%08x\n", r->head); + return -EINVAL; + } + /* read Tx head till it is not busy */ + for (retry = 5; retry > 0; retry--) { + wil_memcpy_fromio_32(&d_head, head, sizeof(d_head)); + if (d_head.sync == 0) + break; + msleep(20); + } + if (d_head.sync != 0) { + wil_err(wil, "WMI head busy\n"); + return -EBUSY; + } + /* next head */ + next_head = r->base + ((r->head - r->base + sizeof(d_head)) % r->size); + wil_dbg_WMI(wil, "Head 0x%08x -> 0x%08x\n", r->head, next_head); + /* wait till FW finish with previous command */ + for (retry = 5; retry > 0; retry--) { + r->tail = ioread32(wil->csr + HOST_MBOX + + offsetof(struct wil6210_mbox_ctl, tx.tail)); + if (next_head != r->tail) + break; + msleep(20); + } + if (next_head == r->tail) { + wil_err(wil, "WMI ring full\n"); + return -EBUSY; + } + dst = wmi_buffer(wil, d_head.addr); + if (!dst) { + wil_err(wil, "invalid WMI buffer: 0x%08x\n", + le32_to_cpu(d_head.addr)); + return -EINVAL; + } + cmd.hdr.seq = cpu_to_le16(++wil->wmi_seq); + /* set command */ + wil_dbg_WMI(wil, "WMI command 0x%04x [%d]\n", cmdid, len); + wil_hex_dump_WMI("Cmd ", DUMP_PREFIX_OFFSET, 16, 1, &cmd, + sizeof(cmd), true); + wil_hex_dump_WMI("cmd ", DUMP_PREFIX_OFFSET, 16, 1, buf, + len, true); + wil_memcpy_toio_32(dst, &cmd, sizeof(cmd)); + wil_memcpy_toio_32(dst + sizeof(cmd), buf, len); + /* mark entry as full */ + iowrite32(1, wil->csr + HOSTADDR(r->head) + + offsetof(struct wil6210_mbox_ring_desc, sync)); + /* advance next ptr */ + iowrite32(r->head = next_head, wil->csr + HOST_MBOX + + offsetof(struct wil6210_mbox_ctl, tx.head)); + + /* interrupt to FW */ + iowrite32(SW_INT_MBOX, wil->csr + HOST_SW_INT); + + return 0; +} + +int wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) +{ + int rc; + + mutex_lock(&wil->wmi_mutex); + rc = __wmi_send(wil, cmdid, buf, len); + mutex_unlock(&wil->wmi_mutex); + + return rc; +} + +/*=== Event handlers ===*/ +static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len) +{ + struct net_device *ndev = wil_to_ndev(wil); + struct wireless_dev *wdev = wil->wdev; + struct wmi_ready_event *evt = d; + u32 ver = le32_to_cpu(evt->sw_version); + + wil_dbg_WMI(wil, "FW ver. %d; MAC %pM\n", ver, evt->mac); + + if (!is_valid_ether_addr(ndev->dev_addr)) { + memcpy(ndev->dev_addr, evt->mac, ETH_ALEN); + memcpy(ndev->perm_addr, evt->mac, ETH_ALEN); + } + snprintf(wdev->wiphy->fw_version, sizeof(wdev->wiphy->fw_version), + "%d", ver); +} + +static void wmi_evt_fw_ready(struct wil6210_priv *wil, int id, void *d, + int len) +{ + wil_dbg_WMI(wil, "WMI: FW ready\n"); + + set_bit(wil_status_fwready, &wil->status); + /* reuse wmi_ready for the firmware ready indication */ + complete(&wil->wmi_ready); +} + +static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len) +{ + struct wmi_rx_mgmt_packet_event *data = d; + struct wiphy *wiphy = wil_to_wiphy(wil); + struct ieee80211_mgmt *rx_mgmt_frame = + (struct ieee80211_mgmt *)data->payload; + int ch_no = data->info.channel+1; + u32 freq = ieee80211_channel_to_frequency(ch_no, + IEEE80211_BAND_60GHZ); + struct ieee80211_channel *channel = ieee80211_get_channel(wiphy, freq); + /* TODO convert LE to CPU */ + s32 signal = 0; /* TODO */ + __le16 fc = rx_mgmt_frame->frame_control; + u32 d_len = le32_to_cpu(data->info.len); + u16 d_status = le16_to_cpu(data->info.status); + + wil_dbg_WMI(wil, "MGMT: channel %d MCS %d SNR %d\n", + data->info.channel, data->info.mcs, data->info.snr); + wil_dbg_WMI(wil, "status 0x%04x len %d stype %04x\n", d_status, d_len, + le16_to_cpu(data->info.stype)); + wil_dbg_WMI(wil, "qid %d mid %d cid %d\n", + data->info.qid, data->info.mid, data->info.cid); + + if (!channel) { + wil_err(wil, "Frame on unsupported channel\n"); + return; + } + + if (ieee80211_is_beacon(fc) || ieee80211_is_probe_resp(fc)) { + struct cfg80211_bss *bss; + u64 tsf = le64_to_cpu(rx_mgmt_frame->u.beacon.timestamp); + u16 cap = le16_to_cpu(rx_mgmt_frame->u.beacon.capab_info); + u16 bi = le16_to_cpu(rx_mgmt_frame->u.beacon.beacon_int); + const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable; + size_t ie_len = d_len - offsetof(struct ieee80211_mgmt, + u.beacon.variable); + wil_dbg_WMI(wil, "Capability info : 0x%04x\n", cap); + + bss = cfg80211_inform_bss(wiphy, channel, rx_mgmt_frame->bssid, + tsf, cap, bi, ie_buf, ie_len, + signal, GFP_KERNEL); + if (bss) { + wil_dbg_WMI(wil, "Added BSS %pM\n", + rx_mgmt_frame->bssid); + cfg80211_put_bss(bss); + } else { + wil_err(wil, "cfg80211_inform_bss() failed\n"); + } + } +} + +static void wmi_evt_scan_complete(struct wil6210_priv *wil, int id, + void *d, int len) +{ + if (wil->scan_request) { + struct wmi_scan_complete_event *data = d; + bool aborted = (data->status != 0); + + wil_dbg_WMI(wil, "SCAN_COMPLETE(0x%08x)\n", data->status); + cfg80211_scan_done(wil->scan_request, aborted); + wil->scan_request = NULL; + } else { + wil_err(wil, "SCAN_COMPLETE while not scanning\n"); + } +} + +static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len) +{ + struct net_device *ndev = wil_to_ndev(wil); + struct wireless_dev *wdev = wil->wdev; + struct wmi_connect_event *evt = d; + int ch; /* channel number */ + struct station_info sinfo; + u8 *assoc_req_ie, *assoc_resp_ie; + size_t assoc_req_ielen, assoc_resp_ielen; + /* capinfo(u16) + listen_interval(u16) + IEs */ + const size_t assoc_req_ie_offset = sizeof(u16) * 2; + /* capinfo(u16) + status_code(u16) + associd(u16) + IEs */ + const size_t assoc_resp_ie_offset = sizeof(u16) * 3; + + if (len < sizeof(*evt)) { + wil_err(wil, "Connect event too short : %d bytes\n", len); + return; + } + if (len != sizeof(*evt) + evt->beacon_ie_len + evt->assoc_req_len + + evt->assoc_resp_len) { + wil_err(wil, + "Connect event corrupted : %d != %d + %d + %d + %d\n", + len, (int)sizeof(*evt), evt->beacon_ie_len, + evt->assoc_req_len, evt->assoc_resp_len); + return; + } + ch = evt->channel + 1; + wil_dbg_WMI(wil, "Connect %pM channel [%d] cid %d\n", + evt->bssid, ch, evt->cid); + wil_hex_dump_WMI("connect AI : ", DUMP_PREFIX_OFFSET, 16, 1, + evt->assoc_info, len - sizeof(*evt), true); + + /* figure out IE's */ + assoc_req_ie = &evt->assoc_info[evt->beacon_ie_len + + assoc_req_ie_offset]; + assoc_req_ielen = evt->assoc_req_len - assoc_req_ie_offset; + if (evt->assoc_req_len <= assoc_req_ie_offset) { + assoc_req_ie = NULL; + assoc_req_ielen = 0; + } + + assoc_resp_ie = &evt->assoc_info[evt->beacon_ie_len + + evt->assoc_req_len + + assoc_resp_ie_offset]; + assoc_resp_ielen = evt->assoc_resp_len - assoc_resp_ie_offset; + if (evt->assoc_resp_len <= assoc_resp_ie_offset) { + assoc_resp_ie = NULL; + assoc_resp_ielen = 0; + } + + if ((wdev->iftype == NL80211_IFTYPE_STATION) || + (wdev->iftype == NL80211_IFTYPE_P2P_CLIENT)) { + if (wdev->sme_state != CFG80211_SME_CONNECTING) { + wil_err(wil, "Not in connecting state\n"); + return; + } + del_timer_sync(&wil->connect_timer); + cfg80211_connect_result(ndev, evt->bssid, + assoc_req_ie, assoc_req_ielen, + assoc_resp_ie, assoc_resp_ielen, + WLAN_STATUS_SUCCESS, GFP_KERNEL); + + } else if ((wdev->iftype == NL80211_IFTYPE_AP) || + (wdev->iftype == NL80211_IFTYPE_P2P_GO)) { + memset(&sinfo, 0, sizeof(sinfo)); + + sinfo.generation = wil->sinfo_gen++; + + if (assoc_req_ie) { + sinfo.assoc_req_ies = assoc_req_ie; + sinfo.assoc_req_ies_len = assoc_req_ielen; + sinfo.filled |= STATION_INFO_ASSOC_REQ_IES; + } + + cfg80211_new_sta(ndev, evt->bssid, &sinfo, GFP_KERNEL); + } + set_bit(wil_status_fwconnected, &wil->status); + + /* FIXME FW can transmit only ucast frames to peer */ + /* FIXME real ring_id instead of hard coded 0 */ + memcpy(wil->dst_addr[0], evt->bssid, ETH_ALEN); + + wil->pending_connect_cid = evt->cid; + queue_work(wil->wmi_wq_conn, &wil->wmi_connect_worker); +} + +static void wmi_evt_disconnect(struct wil6210_priv *wil, int id, + void *d, int len) +{ + struct wmi_disconnect_event *evt = d; + + wil_dbg_WMI(wil, "Disconnect %pM reason %d proto %d wmi\n", + evt->bssid, + evt->protocol_reason_status, evt->disconnect_reason); + + wil->sinfo_gen++; + + wil6210_disconnect(wil, evt->bssid); + clear_bit(wil_status_dontscan, &wil->status); +} + +static void wmi_evt_notify(struct wil6210_priv *wil, int id, void *d, int len) +{ + struct wmi_notify_req_done_event *evt = d; + + if (len < sizeof(*evt)) { + wil_err(wil, "Short NOTIFY event\n"); + return; + } + + wil->stats.tsf = le64_to_cpu(evt->tsf); + wil->stats.snr = le32_to_cpu(evt->snr_val); + wil->stats.bf_mcs = le16_to_cpu(evt->bf_mcs); + wil->stats.my_rx_sector = le16_to_cpu(evt->my_rx_sector); + wil->stats.my_tx_sector = le16_to_cpu(evt->my_tx_sector); + wil->stats.peer_rx_sector = le16_to_cpu(evt->other_rx_sector); + wil->stats.peer_tx_sector = le16_to_cpu(evt->other_tx_sector); + wil_dbg_WMI(wil, "Link status, MCS %d TSF 0x%016llx\n" + "BF status 0x%08x SNR 0x%08x\n" + "Tx Tpt %d goodput %d Rx goodput %d\n" + "Sectors(rx:tx) my %d:%d peer %d:%d\n", + wil->stats.bf_mcs, wil->stats.tsf, evt->status, + wil->stats.snr, le32_to_cpu(evt->tx_tpt), + le32_to_cpu(evt->tx_goodput), le32_to_cpu(evt->rx_goodput), + wil->stats.my_rx_sector, wil->stats.my_tx_sector, + wil->stats.peer_rx_sector, wil->stats.peer_tx_sector); +} + +/* + * Firmware reports EAPOL frame using WME event. + * Reconstruct Ethernet frame and deliver it via normal Rx + */ +static void wmi_evt_eapol_rx(struct wil6210_priv *wil, int id, + void *d, int len) +{ + struct net_device *ndev = wil_to_ndev(wil); + struct wmi_eapol_rx_event *evt = d; + u16 eapol_len = le16_to_cpu(evt->eapol_len); + int sz = eapol_len + ETH_HLEN; + struct sk_buff *skb; + struct ethhdr *eth; + + wil_dbg_WMI(wil, "EAPOL len %d from %pM\n", eapol_len, + evt->src_mac); + + if (eapol_len > 196) { /* TODO: revisit size limit */ + wil_err(wil, "EAPOL too large\n"); + return; + } + + skb = alloc_skb(sz, GFP_KERNEL); + if (!skb) { + wil_err(wil, "Failed to allocate skb\n"); + return; + } + eth = (struct ethhdr *)skb_put(skb, ETH_HLEN); + memcpy(eth->h_dest, ndev->dev_addr, ETH_ALEN); + memcpy(eth->h_source, evt->src_mac, ETH_ALEN); + eth->h_proto = cpu_to_be16(ETH_P_PAE); + memcpy(skb_put(skb, eapol_len), evt->eapol, eapol_len); + skb->protocol = eth_type_trans(skb, ndev); + if (likely(netif_rx_ni(skb) == NET_RX_SUCCESS)) { + ndev->stats.rx_packets++; + ndev->stats.rx_bytes += skb->len; + } else { + ndev->stats.rx_dropped++; + } +} + +static const struct { + int eventid; + void (*handler)(struct wil6210_priv *wil, int eventid, + void *data, int data_len); +} wmi_evt_handlers[] = { + {WMI_READY_EVENTID, wmi_evt_ready}, + {WMI_FW_READY_EVENTID, wmi_evt_fw_ready}, + {WMI_RX_MGMT_PACKET_EVENTID, wmi_evt_rx_mgmt}, + {WMI_SCAN_COMPLETE_EVENTID, wmi_evt_scan_complete}, + {WMI_CONNECT_EVENTID, wmi_evt_connect}, + {WMI_DISCONNECT_EVENTID, wmi_evt_disconnect}, + {WMI_NOTIFY_REQ_DONE_EVENTID, wmi_evt_notify}, + {WMI_EAPOL_RX_EVENTID, wmi_evt_eapol_rx}, +}; + +/* + * Run in IRQ context + * Extract WMI command from mailbox. Queue it to the @wil->pending_wmi_ev + * that will be eventually handled by the @wmi_event_worker in the thread + * context of thread "wil6210_wmi" + */ +void wmi_recv_cmd(struct wil6210_priv *wil) +{ + struct wil6210_mbox_ring_desc d_tail; + struct wil6210_mbox_hdr hdr; + struct wil6210_mbox_ring *r = &wil->mbox_ctl.rx; + struct pending_wmi_event *evt; + u8 *cmd; + void __iomem *src; + ulong flags; + + for (;;) { + u16 len; + + r->head = ioread32(wil->csr + HOST_MBOX + + offsetof(struct wil6210_mbox_ctl, rx.head)); + if (r->tail == r->head) + return; + + /* read cmd from tail */ + wil_memcpy_fromio_32(&d_tail, wil->csr + HOSTADDR(r->tail), + sizeof(struct wil6210_mbox_ring_desc)); + if (d_tail.sync == 0) { + wil_err(wil, "Mbox evt not owned by FW?\n"); + return; + } + + if (0 != wmi_read_hdr(wil, d_tail.addr, &hdr)) { + wil_err(wil, "Mbox evt at 0x%08x?\n", + le32_to_cpu(d_tail.addr)); + return; + } + + len = le16_to_cpu(hdr.len); + src = wmi_buffer(wil, d_tail.addr) + + sizeof(struct wil6210_mbox_hdr); + evt = kmalloc(ALIGN(offsetof(struct pending_wmi_event, + event.wmi) + len, 4), + GFP_KERNEL); + if (!evt) { + wil_err(wil, "kmalloc for WMI event (%d) failed\n", + len); + return; + } + evt->event.hdr = hdr; + cmd = (void *)&evt->event.wmi; + wil_memcpy_fromio_32(cmd, src, len); + /* mark entry as empty */ + iowrite32(0, wil->csr + HOSTADDR(r->tail) + + offsetof(struct wil6210_mbox_ring_desc, sync)); + /* indicate */ + wil_dbg_WMI(wil, "Mbox evt %04x %04x %04x %02x\n", + le16_to_cpu(hdr.seq), len, le16_to_cpu(hdr.type), + hdr.flags); + if ((hdr.type == WIL_MBOX_HDR_TYPE_WMI) && + (len >= sizeof(struct wil6210_mbox_hdr_wmi))) { + wil_dbg_WMI(wil, "WMI event 0x%04x\n", + evt->event.wmi.id); + } + wil_hex_dump_WMI("evt ", DUMP_PREFIX_OFFSET, 16, 1, + &evt->event.hdr, sizeof(hdr) + len, true); + + /* advance tail */ + r->tail = r->base + ((r->tail - r->base + + sizeof(struct wil6210_mbox_ring_desc)) % r->size); + iowrite32(r->tail, wil->csr + HOST_MBOX + + offsetof(struct wil6210_mbox_ctl, rx.tail)); + + /* add to the pending list */ + spin_lock_irqsave(&wil->wmi_ev_lock, flags); + list_add_tail(&evt->list, &wil->pending_wmi_ev); + spin_unlock_irqrestore(&wil->wmi_ev_lock, flags); + { + int q = queue_work(wil->wmi_wq, + &wil->wmi_event_worker); + wil_dbg_WMI(wil, "queue_work -> %d\n", q); + } + } +} + +int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len, + u16 reply_id, void *reply, u8 reply_size, int to_msec) +{ + int rc; + int remain; + + mutex_lock(&wil->wmi_mutex); + + rc = __wmi_send(wil, cmdid, buf, len); + if (rc) + goto out; + + wil->reply_id = reply_id; + wil->reply_buf = reply; + wil->reply_size = reply_size; + remain = wait_for_completion_timeout(&wil->wmi_ready, + msecs_to_jiffies(to_msec)); + if (0 == remain) { + wil_err(wil, "wmi_call(0x%04x->0x%04x) timeout %d msec\n", + cmdid, reply_id, to_msec); + rc = -ETIME; + } else { + wil_dbg_WMI(wil, + "wmi_call(0x%04x->0x%04x) completed in %d msec\n", + cmdid, reply_id, + to_msec - jiffies_to_msecs(remain)); + } + wil->reply_id = 0; + wil->reply_buf = NULL; + wil->reply_size = 0; + out: + mutex_unlock(&wil->wmi_mutex); + + return rc; +} + +int wmi_echo(struct wil6210_priv *wil) +{ + struct wmi_echo_cmd cmd = { + .value = cpu_to_le32(0x12345678), + }; + + return wmi_call(wil, WMI_ECHO_CMDID, &cmd, sizeof(cmd), + WMI_ECHO_RSP_EVENTID, NULL, 0, 20); +} + +int wmi_set_mac_address(struct wil6210_priv *wil, void *addr) +{ + struct wmi_set_mac_address_cmd cmd; + + memcpy(cmd.mac, addr, ETH_ALEN); + + wil_dbg_WMI(wil, "Set MAC %pM\n", addr); + + return wmi_send(wil, WMI_SET_MAC_ADDRESS_CMDID, &cmd, sizeof(cmd)); +} + +int wmi_set_bcon(struct wil6210_priv *wil, int bi, u8 wmi_nettype) +{ + struct wmi_bcon_ctrl_cmd cmd = { + .bcon_interval = cpu_to_le16(bi), + .network_type = wmi_nettype, + .disable_sec_offload = 1, + }; + + if (!wil->secure_pcp) + cmd.disable_sec = 1; + + return wmi_send(wil, WMI_BCON_CTRL_CMDID, &cmd, sizeof(cmd)); +} + +int wmi_set_ssid(struct wil6210_priv *wil, u8 ssid_len, const void *ssid) +{ + struct wmi_set_ssid_cmd cmd = { + .ssid_len = cpu_to_le32(ssid_len), + }; + + if (ssid_len > sizeof(cmd.ssid)) + return -EINVAL; + + memcpy(cmd.ssid, ssid, ssid_len); + + return wmi_send(wil, WMI_SET_SSID_CMDID, &cmd, sizeof(cmd)); +} + +int wmi_get_ssid(struct wil6210_priv *wil, u8 *ssid_len, void *ssid) +{ + int rc; + struct { + struct wil6210_mbox_hdr_wmi wmi; + struct wmi_set_ssid_cmd cmd; + } __packed reply; + int len; /* reply.cmd.ssid_len in CPU order */ + + rc = wmi_call(wil, WMI_GET_SSID_CMDID, NULL, 0, WMI_GET_SSID_EVENTID, + &reply, sizeof(reply), 20); + if (rc) + return rc; + + len = le32_to_cpu(reply.cmd.ssid_len); + if (len > sizeof(reply.cmd.ssid)) + return -EINVAL; + + *ssid_len = len; + memcpy(ssid, reply.cmd.ssid, len); + + return 0; +} + +int wmi_set_channel(struct wil6210_priv *wil, int channel) +{ + struct wmi_set_pcp_channel_cmd cmd = { + .channel = channel - 1, + }; + + return wmi_send(wil, WMI_SET_PCP_CHANNEL_CMDID, &cmd, sizeof(cmd)); +} + +int wmi_get_channel(struct wil6210_priv *wil, int *channel) +{ + int rc; + struct { + struct wil6210_mbox_hdr_wmi wmi; + struct wmi_set_pcp_channel_cmd cmd; + } __packed reply; + + rc = wmi_call(wil, WMI_GET_PCP_CHANNEL_CMDID, NULL, 0, + WMI_GET_PCP_CHANNEL_EVENTID, &reply, sizeof(reply), 20); + if (rc) + return rc; + + if (reply.cmd.channel > 3) + return -EINVAL; + + *channel = reply.cmd.channel + 1; + + return 0; +} + +int wmi_tx_eapol(struct wil6210_priv *wil, struct sk_buff *skb) +{ + struct wmi_eapol_tx_cmd *cmd; + struct ethhdr *eth; + u16 eapol_len = skb->len - ETH_HLEN; + void *eapol = skb->data + ETH_HLEN; + uint i; + int rc; + + skb_set_mac_header(skb, 0); + eth = eth_hdr(skb); + wil_dbg_WMI(wil, "EAPOL %d bytes to %pM\n", eapol_len, eth->h_dest); + for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) { + if (memcmp(wil->dst_addr[i], eth->h_dest, ETH_ALEN) == 0) + goto found_dest; + } + + return -EINVAL; + + found_dest: + /* find out eapol data & len */ + cmd = kzalloc(sizeof(*cmd) + eapol_len, GFP_KERNEL); + if (!cmd) + return -EINVAL; + + memcpy(cmd->dst_mac, eth->h_dest, ETH_ALEN); + cmd->eapol_len = cpu_to_le16(eapol_len); + memcpy(cmd->eapol, eapol, eapol_len); + rc = wmi_send(wil, WMI_EAPOL_TX_CMDID, cmd, sizeof(*cmd) + eapol_len); + kfree(cmd); + + return rc; +} + +int wmi_del_cipher_key(struct wil6210_priv *wil, u8 key_index, + const void *mac_addr) +{ + struct wmi_delete_cipher_key_cmd cmd = { + .key_index = key_index, + }; + + if (mac_addr) + memcpy(cmd.mac, mac_addr, WMI_MAC_LEN); + + return wmi_send(wil, WMI_DELETE_CIPHER_KEY_CMDID, &cmd, sizeof(cmd)); +} + +int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index, + const void *mac_addr, int key_len, const void *key) +{ + struct wmi_add_cipher_key_cmd cmd = { + .key_index = key_index, + .key_usage = WMI_KEY_USE_PAIRWISE, + .key_len = key_len, + }; + + if (!key || (key_len > sizeof(cmd.key))) + return -EINVAL; + + memcpy(cmd.key, key, key_len); + if (mac_addr) + memcpy(cmd.mac, mac_addr, WMI_MAC_LEN); + + return wmi_send(wil, WMI_ADD_CIPHER_KEY_CMDID, &cmd, sizeof(cmd)); +} + +int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie) +{ + int rc; + u16 len = sizeof(struct wmi_set_appie_cmd) + ie_len; + struct wmi_set_appie_cmd *cmd = kzalloc(len, GFP_KERNEL); + if (!cmd) { + wil_err(wil, "kmalloc(%d) failed\n", len); + return -ENOMEM; + } + + cmd->mgmt_frm_type = type; + /* BUG: FW API define ieLen as u8. Will fix FW */ + cmd->ie_len = cpu_to_le16(ie_len); + memcpy(cmd->ie_info, ie, ie_len); + rc = wmi_send(wil, WMI_SET_APPIE_CMDID, &cmd, len); + kfree(cmd); + + return rc; +} + +void wmi_event_flush(struct wil6210_priv *wil) +{ + struct pending_wmi_event *evt, *t; + + wil_dbg_WMI(wil, "%s()\n", __func__); + + list_for_each_entry_safe(evt, t, &wil->pending_wmi_ev, list) { + list_del(&evt->list); + kfree(evt); + } +} + +static bool wmi_evt_call_handler(struct wil6210_priv *wil, int id, + void *d, int len) +{ + uint i; + + for (i = 0; i < ARRAY_SIZE(wmi_evt_handlers); i++) { + if (wmi_evt_handlers[i].eventid == id) { + wmi_evt_handlers[i].handler(wil, id, d, len); + return true; + } + } + + return false; +} + +static void wmi_event_handle(struct wil6210_priv *wil, + struct wil6210_mbox_hdr *hdr) +{ + u16 len = le16_to_cpu(hdr->len); + + if ((hdr->type == WIL_MBOX_HDR_TYPE_WMI) && + (len >= sizeof(struct wil6210_mbox_hdr_wmi))) { + struct wil6210_mbox_hdr_wmi *wmi = (void *)(&hdr[1]); + void *evt_data = (void *)(&wmi[1]); + u16 id = le16_to_cpu(wmi->id); + /* check if someone waits for this event */ + if (wil->reply_id && wil->reply_id == id) { + if (wil->reply_buf) { + memcpy(wil->reply_buf, wmi, + min(len, wil->reply_size)); + } else { + wmi_evt_call_handler(wil, id, evt_data, + len - sizeof(*wmi)); + } + wil_dbg_WMI(wil, "Complete WMI 0x%04x\n", id); + complete(&wil->wmi_ready); + return; + } + /* unsolicited event */ + /* search for handler */ + if (!wmi_evt_call_handler(wil, id, evt_data, + len - sizeof(*wmi))) { + wil_err(wil, "Unhandled event 0x%04x\n", id); + } + } else { + wil_err(wil, "Unknown event type\n"); + print_hex_dump(KERN_ERR, "evt?? ", DUMP_PREFIX_OFFSET, 16, 1, + hdr, sizeof(*hdr) + len, true); + } +} + +/* + * Retrieve next WMI event from the pending list + */ +static struct list_head *next_wmi_ev(struct wil6210_priv *wil) +{ + ulong flags; + struct list_head *ret = NULL; + + spin_lock_irqsave(&wil->wmi_ev_lock, flags); + + if (!list_empty(&wil->pending_wmi_ev)) { + ret = wil->pending_wmi_ev.next; + list_del(ret); + } + + spin_unlock_irqrestore(&wil->wmi_ev_lock, flags); + + return ret; +} + +/* + * Handler for the WMI events + */ +void wmi_event_worker(struct work_struct *work) +{ + struct wil6210_priv *wil = container_of(work, struct wil6210_priv, + wmi_event_worker); + struct pending_wmi_event *evt; + struct list_head *lh; + + while ((lh = next_wmi_ev(wil)) != NULL) { + evt = list_entry(lh, struct pending_wmi_event, list); + wmi_event_handle(wil, &evt->event.hdr); + kfree(evt); + } +} + +void wmi_connect_worker(struct work_struct *work) +{ + int rc; + struct wil6210_priv *wil = container_of(work, struct wil6210_priv, + wmi_connect_worker); + + if (wil->pending_connect_cid < 0) { + wil_err(wil, "No connection pending\n"); + return; + } + + wil_dbg_WMI(wil, "Configure for connection CID %d\n", + wil->pending_connect_cid); + + rc = wil_vring_init_tx(wil, 0, WIL6210_TX_RING_SIZE, + wil->pending_connect_cid, 0); + wil->pending_connect_cid = -1; + if (rc == 0) + wil_link_on(wil); +} diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h new file mode 100644 index 000000000000..3bbf87572b07 --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/wmi.h @@ -0,0 +1,1116 @@ +/* + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * Copyright (c) 2006-2012 Wilocity . + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/* + * This file contains the definitions of the WMI protocol specified in the + * Wireless Module Interface (WMI) for the Wilocity + * MARLON 60 Gigabit wireless solution. + * It includes definitions of all the commands and events. + * Commands are messages from the host to the WM. + * Events are messages from the WM to the host. + */ + +#ifndef __WILOCITY_WMI_H__ +#define __WILOCITY_WMI_H__ + +/* General */ + +#define WMI_MAC_LEN (6) +#define WMI_PROX_RANGE_NUM (3) + +/* List of Commands */ +enum wmi_command_id { + WMI_CONNECT_CMDID = 0x0001, + WMI_DISCONNECT_CMDID = 0x0003, + WMI_START_SCAN_CMDID = 0x0007, + WMI_SET_BSS_FILTER_CMDID = 0x0009, + WMI_SET_PROBED_SSID_CMDID = 0x000a, + WMI_SET_LISTEN_INT_CMDID = 0x000b, + WMI_BCON_CTRL_CMDID = 0x000f, + WMI_ADD_CIPHER_KEY_CMDID = 0x0016, + WMI_DELETE_CIPHER_KEY_CMDID = 0x0017, + WMI_SET_APPIE_CMDID = 0x003f, + WMI_GET_APPIE_CMDID = 0x0040, + WMI_SET_WSC_STATUS_CMDID = 0x0041, + WMI_PXMT_RANGE_CFG_CMDID = 0x0042, + WMI_PXMT_SNR2_RANGE_CFG_CMDID = 0x0043, + WMI_FAST_MEM_ACC_MODE_CMDID = 0x0300, + WMI_MEM_READ_CMDID = 0x0800, + WMI_MEM_WR_CMDID = 0x0801, + WMI_ECHO_CMDID = 0x0803, + WMI_DEEP_ECHO_CMDID = 0x0804, + WMI_CONFIG_MAC_CMDID = 0x0805, + WMI_CONFIG_PHY_DEBUG_CMDID = 0x0806, + WMI_ADD_STATION_CMDID = 0x0807, + WMI_ADD_DEBUG_TX_PCKT_CMDID = 0x0808, + WMI_PHY_GET_STATISTICS_CMDID = 0x0809, + WMI_FS_TUNE_CMDID = 0x080a, + WMI_CORR_MEASURE_CMDID = 0x080b, + WMI_TEMP_SENSE_CMDID = 0x080e, + WMI_DC_CALIB_CMDID = 0x080f, + WMI_SEND_TONE_CMDID = 0x0810, + WMI_IQ_TX_CALIB_CMDID = 0x0811, + WMI_IQ_RX_CALIB_CMDID = 0x0812, + WMI_SET_UCODE_IDLE_CMDID = 0x0813, + WMI_SET_WORK_MODE_CMDID = 0x0815, + WMI_LO_LEAKAGE_CALIB_CMDID = 0x0816, + WMI_MARLON_R_ACTIVATE_CMDID = 0x0817, + WMI_MARLON_R_READ_CMDID = 0x0818, + WMI_MARLON_R_WRITE_CMDID = 0x0819, + WMI_MARLON_R_TXRX_SEL_CMDID = 0x081a, + MAC_IO_STATIC_PARAMS_CMDID = 0x081b, + MAC_IO_DYNAMIC_PARAMS_CMDID = 0x081c, + WMI_SILENT_RSSI_CALIB_CMDID = 0x081d, + WMI_CFG_RX_CHAIN_CMDID = 0x0820, + WMI_VRING_CFG_CMDID = 0x0821, + WMI_RX_ON_CMDID = 0x0822, + WMI_VRING_BA_EN_CMDID = 0x0823, + WMI_VRING_BA_DIS_CMDID = 0x0824, + WMI_RCP_ADDBA_RESP_CMDID = 0x0825, + WMI_RCP_DELBA_CMDID = 0x0826, + WMI_SET_SSID_CMDID = 0x0827, + WMI_GET_SSID_CMDID = 0x0828, + WMI_SET_PCP_CHANNEL_CMDID = 0x0829, + WMI_GET_PCP_CHANNEL_CMDID = 0x082a, + WMI_SW_TX_REQ_CMDID = 0x082b, + WMI_RX_OFF_CMDID = 0x082c, + WMI_READ_MAC_RXQ_CMDID = 0x0830, + WMI_READ_MAC_TXQ_CMDID = 0x0831, + WMI_WRITE_MAC_RXQ_CMDID = 0x0832, + WMI_WRITE_MAC_TXQ_CMDID = 0x0833, + WMI_WRITE_MAC_XQ_FIELD_CMDID = 0x0834, + WMI_MLME_PUSH_CMDID = 0x0835, + WMI_BEAMFORMING_MGMT_CMDID = 0x0836, + WMI_BF_TXSS_MGMT_CMDID = 0x0837, + WMI_BF_SM_MGMT_CMDID = 0x0838, + WMI_BF_RXSS_MGMT_CMDID = 0x0839, + WMI_SET_SECTORS_CMDID = 0x0849, + WMI_MAINTAIN_PAUSE_CMDID = 0x0850, + WMI_MAINTAIN_RESUME_CMDID = 0x0851, + WMI_RS_MGMT_CMDID = 0x0852, + WMI_RF_MGMT_CMDID = 0x0853, + /* Performance monitoring commands */ + WMI_BF_CTRL_CMDID = 0x0862, + WMI_NOTIFY_REQ_CMDID = 0x0863, + WMI_GET_STATUS_CMDID = 0x0864, + WMI_UNIT_TEST_CMDID = 0x0900, + WMI_HICCUP_CMDID = 0x0901, + WMI_FLASH_READ_CMDID = 0x0902, + WMI_FLASH_WRITE_CMDID = 0x0903, + WMI_SECURITY_UNIT_TEST_CMDID = 0x0904, + + WMI_SET_MAC_ADDRESS_CMDID = 0xf003, + WMI_ABORT_SCAN_CMDID = 0xf007, + WMI_SET_PMK_CMDID = 0xf028, + + WMI_SET_PROMISCUOUS_MODE_CMDID = 0xf041, + WMI_GET_PMK_CMDID = 0xf048, + WMI_SET_PASSPHRASE_CMDID = 0xf049, + WMI_SEND_ASSOC_RES_CMDID = 0xf04a, + WMI_SET_ASSOC_REQ_RELAY_CMDID = 0xf04b, + WMI_EAPOL_TX_CMDID = 0xf04c, + WMI_MAC_ADDR_REQ_CMDID = 0xf04d, + WMI_FW_VER_CMDID = 0xf04e, +}; + +/* + * Commands data structures + */ + +/* + * Frame Types + */ +enum wmi_mgmt_frame_type { + WMI_FRAME_BEACON = 0, + WMI_FRAME_PROBE_REQ = 1, + WMI_FRAME_PROBE_RESP = 2, + WMI_FRAME_ASSOC_REQ = 3, + WMI_FRAME_ASSOC_RESP = 4, + WMI_NUM_MGMT_FRAME, +}; + +/* + * WMI_CONNECT_CMDID + */ +enum wmi_network_type { + WMI_NETTYPE_INFRA = 0x01, + WMI_NETTYPE_ADHOC = 0x02, + WMI_NETTYPE_ADHOC_CREATOR = 0x04, + WMI_NETTYPE_AP = 0x10, + WMI_NETTYPE_P2P = 0x20, + WMI_NETTYPE_WBE = 0x40, /* PCIE over 60g */ +}; + +enum wmi_dot11_auth_mode { + WMI_AUTH11_OPEN = 0x01, + WMI_AUTH11_SHARED = 0x02, + WMI_AUTH11_LEAP = 0x04, + WMI_AUTH11_WSC = 0x08, +}; + +enum wmi_auth_mode { + WMI_AUTH_NONE = 0x01, + WMI_AUTH_WPA = 0x02, + WMI_AUTH_WPA2 = 0x04, + WMI_AUTH_WPA_PSK = 0x08, + WMI_AUTH_WPA2_PSK = 0x10, + WMI_AUTH_WPA_CCKM = 0x20, + WMI_AUTH_WPA2_CCKM = 0x40, +}; + +enum wmi_crypto_type { + WMI_CRYPT_NONE = 0x01, + WMI_CRYPT_WEP = 0x02, + WMI_CRYPT_TKIP = 0x04, + WMI_CRYPT_AES = 0x08, + WMI_CRYPT_AES_GCMP = 0x20, +}; + + +enum wmi_connect_ctrl_flag_bits { + WMI_CONNECT_ASSOC_POLICY_USER = 0x0001, + WMI_CONNECT_SEND_REASSOC = 0x0002, + WMI_CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004, + WMI_CONNECT_PROFILE_MATCH_DONE = 0x0008, + WMI_CONNECT_IGNORE_AAC_BEACON = 0x0010, + WMI_CONNECT_CSA_FOLLOW_BSS = 0x0020, + WMI_CONNECT_DO_WPA_OFFLOAD = 0x0040, + WMI_CONNECT_DO_NOT_DEAUTH = 0x0080, +}; + +#define WMI_MAX_SSID_LEN (32) + +struct wmi_connect_cmd { + u8 network_type; + u8 dot11_auth_mode; + u8 auth_mode; + u8 pairwise_crypto_type; + u8 pairwise_crypto_len; + u8 group_crypto_type; + u8 group_crypto_len; + u8 ssid_len; + u8 ssid[WMI_MAX_SSID_LEN]; + u8 channel; + u8 reserved0; + u8 bssid[WMI_MAC_LEN]; + __le32 ctrl_flags; + u8 dst_mac[WMI_MAC_LEN]; + u8 reserved1[2]; +} __packed; + + +/* + * WMI_RECONNECT_CMDID + */ +struct wmi_reconnect_cmd { + u8 channel; /* hint */ + u8 reserved; + u8 bssid[WMI_MAC_LEN]; /* mandatory if set */ +} __packed; + + +/* + * WMI_SET_PMK_CMDID + */ + +#define WMI_MIN_KEY_INDEX (0) +#define WMI_MAX_KEY_INDEX (3) +#define WMI_MAX_KEY_LEN (32) +#define WMI_PASSPHRASE_LEN (64) +#define WMI_PMK_LEN (32) + +struct wmi_set_pmk_cmd { + u8 pmk[WMI_PMK_LEN]; +} __packed; + + +/* + * WMI_SET_PASSPHRASE_CMDID + */ +struct wmi_set_passphrase_cmd { + u8 ssid[WMI_MAX_SSID_LEN]; + u8 passphrase[WMI_PASSPHRASE_LEN]; + u8 ssid_len; + u8 passphrase_len; +} __packed; + +/* + * WMI_ADD_CIPHER_KEY_CMDID + */ +enum wmi_key_usage { + WMI_KEY_USE_PAIRWISE = 0, + WMI_KEY_USE_GROUP = 1, + WMI_KEY_USE_TX = 2, /* default Tx Key - Static WEP only */ +}; + +struct wmi_add_cipher_key_cmd { + u8 key_index; + u8 key_type; + u8 key_usage; /* enum wmi_key_usage */ + u8 key_len; + u8 key_rsc[8]; /* key replay sequence counter */ + u8 key[WMI_MAX_KEY_LEN]; + u8 key_op_ctrl; /* Additional Key Control information */ + u8 mac[WMI_MAC_LEN]; +} __packed; + +/* + * WMI_DELETE_CIPHER_KEY_CMDID + */ +struct wmi_delete_cipher_key_cmd { + u8 key_index; + u8 mac[WMI_MAC_LEN]; +} __packed; + + +/* + * WMI_START_SCAN_CMDID + * + * Start L1 scan operation + * + * Returned events: + * - WMI_RX_MGMT_PACKET_EVENTID - for every probe resp. + * - WMI_SCAN_COMPLETE_EVENTID + */ +enum wmi_scan_type { + WMI_LONG_SCAN = 0, + WMI_SHORT_SCAN = 1, +}; + +struct wmi_start_scan_cmd { + u8 reserved[8]; + __le32 home_dwell_time; /* Max duration in the home channel(ms) */ + __le32 force_scan_interval; /* Time interval between scans (ms)*/ + u8 scan_type; /* wmi_scan_type */ + u8 num_channels; /* how many channels follow */ + struct { + u8 channel; + u8 reserved; + } channel_list[0]; /* channels ID's */ + /* 0 - 58320 MHz */ + /* 1 - 60480 MHz */ + /* 2 - 62640 MHz */ +} __packed; + +/* + * WMI_SET_PROBED_SSID_CMDID + */ +#define MAX_PROBED_SSID_INDEX (15) + +enum wmi_ssid_flag { + WMI_SSID_FLAG_DISABLE = 0, /* disables entry */ + WMI_SSID_FLAG_SPECIFIC = 1, /* probes specified ssid */ + WMI_SSID_FLAG_ANY = 2, /* probes for any ssid */ +}; + +struct wmi_probed_ssid_cmd { + u8 entry_index; /* 0 to MAX_PROBED_SSID_INDEX */ + u8 flag; /* enum wmi_ssid_flag */ + u8 ssid_len; + u8 ssid[WMI_MAX_SSID_LEN]; +} __packed; + +/* + * WMI_SET_APPIE_CMDID + * Add Application specified IE to a management frame + */ +struct wmi_set_appie_cmd { + u8 mgmt_frm_type; /* enum wmi_mgmt_frame_type */ + u8 reserved; + __le16 ie_len; /* Length of the IE to be added to MGMT frame */ + u8 ie_info[0]; +} __packed; + +#define WMI_MAX_IE_LEN (1024) + +struct wmi_pxmt_range_cfg_cmd { + u8 dst_mac[WMI_MAC_LEN]; + __le16 range; +} __packed; + +struct wmi_pxmt_snr2_range_cfg_cmd { + s8 snr2range_arr[WMI_PROX_RANGE_NUM-1]; +} __packed; + +/* + * WMI_RF_MGMT_CMDID + */ +enum wmi_rf_mgmt_type { + WMI_RF_MGMT_W_DISABLE = 0, + WMI_RF_MGMT_W_ENABLE = 1, + WMI_RF_MGMT_GET_STATUS = 2, +}; + +struct wmi_rf_mgmt_cmd { + __le32 rf_mgmt_type; +} __packed; + +/* + * WMI_SET_SSID_CMDID + */ +struct wmi_set_ssid_cmd { + __le32 ssid_len; + u8 ssid[WMI_MAX_SSID_LEN]; +} __packed; + +/* + * WMI_SET_PCP_CHANNEL_CMDID + */ +struct wmi_set_pcp_channel_cmd { + u8 channel; + u8 reserved[3]; +} __packed; + +/* + * WMI_BCON_CTRL_CMDID + */ +struct wmi_bcon_ctrl_cmd { + __le16 bcon_interval; + __le16 frag_num; + __le64 ss_mask; + u8 network_type; + u8 reserved; + u8 disable_sec_offload; + u8 disable_sec; +} __packed; + +/* + * WMI_SW_TX_REQ_CMDID + */ +struct wmi_sw_tx_req_cmd { + u8 dst_mac[WMI_MAC_LEN]; + __le16 len; + u8 payload[0]; +} __packed; + +/* + * WMI_VRING_CFG_CMDID + */ + +struct wmi_sw_ring_cfg { + __le64 ring_mem_base; + __le16 ring_size; + __le16 max_mpdu_size; +} __packed; + +struct wmi_vring_cfg_schd { + __le16 priority; + __le16 timeslot_us; +} __packed; + +enum wmi_vring_cfg_encap_trans_type { + WMI_VRING_ENC_TYPE_802_3 = 0, + WMI_VRING_ENC_TYPE_NATIVE_WIFI = 1, +}; + +enum wmi_vring_cfg_ds_cfg { + WMI_VRING_DS_PBSS = 0, + WMI_VRING_DS_STATION = 1, + WMI_VRING_DS_AP = 2, + WMI_VRING_DS_ADDR4 = 3, +}; + +enum wmi_vring_cfg_nwifi_ds_trans_type { + WMI_NWIFI_TX_TRANS_MODE_NO = 0, + WMI_NWIFI_TX_TRANS_MODE_AP2PBSS = 1, + WMI_NWIFI_TX_TRANS_MODE_STA2PBSS = 2, +}; + +enum wmi_vring_cfg_schd_params_priority { + WMI_SCH_PRIO_REGULAR = 0, + WMI_SCH_PRIO_HIGH = 1, +}; + +struct wmi_vring_cfg { + struct wmi_sw_ring_cfg tx_sw_ring; + u8 ringid; /* 0-23 vrings */ + + #define CIDXTID_CID_POS (0) + #define CIDXTID_CID_LEN (4) + #define CIDXTID_CID_MSK (0xF) + #define CIDXTID_TID_POS (4) + #define CIDXTID_TID_LEN (4) + #define CIDXTID_TID_MSK (0xF0) + u8 cidxtid; + + u8 encap_trans_type; + u8 ds_cfg; /* 802.3 DS cfg */ + u8 nwifi_ds_trans_type; + + #define VRING_CFG_MAC_CTRL_LIFETIME_EN_POS (0) + #define VRING_CFG_MAC_CTRL_LIFETIME_EN_LEN (1) + #define VRING_CFG_MAC_CTRL_LIFETIME_EN_MSK (0x1) + #define VRING_CFG_MAC_CTRL_AGGR_EN_POS (1) + #define VRING_CFG_MAC_CTRL_AGGR_EN_LEN (1) + #define VRING_CFG_MAC_CTRL_AGGR_EN_MSK (0x2) + u8 mac_ctrl; + + #define VRING_CFG_TO_RESOLUTION_VALUE_POS (0) + #define VRING_CFG_TO_RESOLUTION_VALUE_LEN (6) + #define VRING_CFG_TO_RESOLUTION_VALUE_MSK (0x3F) + u8 to_resolution; + u8 agg_max_wsize; + struct wmi_vring_cfg_schd schd_params; +} __packed; + +enum wmi_vring_cfg_cmd_action { + WMI_VRING_CMD_ADD = 0, + WMI_VRING_CMD_MODIFY = 1, + WMI_VRING_CMD_DELETE = 2, +}; + +struct wmi_vring_cfg_cmd { + __le32 action; + struct wmi_vring_cfg vring_cfg; +} __packed; + +/* + * WMI_VRING_BA_EN_CMDID + */ +struct wmi_vring_ba_en_cmd { + u8 ringid; + u8 agg_max_wsize; + __le16 ba_timeout; +} __packed; + +/* + * WMI_VRING_BA_DIS_CMDID + */ +struct wmi_vring_ba_dis_cmd { + u8 ringid; + u8 reserved; + __le16 reason; +} __packed; + +/* + * WMI_NOTIFY_REQ_CMDID + */ +struct wmi_notify_req_cmd { + u8 cid; + u8 reserved[3]; + __le32 interval_usec; +} __packed; + +/* + * WMI_CFG_RX_CHAIN_CMDID + */ +enum wmi_sniffer_cfg_mode { + WMI_SNIFFER_OFF = 0, + WMI_SNIFFER_ON = 1, +}; + +enum wmi_sniffer_cfg_phy_info_mode { + WMI_SNIFFER_PHY_INFO_DISABLED = 0, + WMI_SNIFFER_PHY_INFO_ENABLED = 1, +}; + +enum wmi_sniffer_cfg_phy_support { + WMI_SNIFFER_CP = 0, + WMI_SNIFFER_DP = 1, + WMI_SNIFFER_BOTH_PHYS = 2, +}; + +struct wmi_sniffer_cfg { + __le32 mode; /* enum wmi_sniffer_cfg_mode */ + __le32 phy_info_mode; /* enum wmi_sniffer_cfg_phy_info_mode */ + __le32 phy_support; /* enum wmi_sniffer_cfg_phy_support */ + u8 channel; + u8 reserved[3]; +} __packed; + +enum wmi_cfg_rx_chain_cmd_action { + WMI_RX_CHAIN_ADD = 0, + WMI_RX_CHAIN_DEL = 1, +}; + +enum wmi_cfg_rx_chain_cmd_decap_trans_type { + WMI_DECAP_TYPE_802_3 = 0, + WMI_DECAP_TYPE_NATIVE_WIFI = 1, +}; + +enum wmi_cfg_rx_chain_cmd_nwifi_ds_trans_type { + WMI_NWIFI_RX_TRANS_MODE_NO = 0, + WMI_NWIFI_RX_TRANS_MODE_PBSS2AP = 1, + WMI_NWIFI_RX_TRANS_MODE_PBSS2STA = 2, +}; + +struct wmi_cfg_rx_chain_cmd { + __le32 action; + struct wmi_sw_ring_cfg rx_sw_ring; + u8 mid; + u8 decap_trans_type; + + #define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_POS (0) + #define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_LEN (1) + #define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_MSK (0x1) + u8 l2_802_3_offload_ctrl; + + #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_POS (0) + #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_LEN (1) + #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_MSK (0x1) + #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_PN_POS (1) + #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_PN_LEN (1) + #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_PN_MSK (0x2) + u8 l2_nwifi_offload_ctrl; + + u8 vlan_id; + u8 nwifi_ds_trans_type; + + #define L3_L4_CTRL_IPV4_CHECKSUM_EN_POS (0) + #define L3_L4_CTRL_IPV4_CHECKSUM_EN_LEN (1) + #define L3_L4_CTRL_IPV4_CHECKSUM_EN_MSK (0x1) + #define L3_L4_CTRL_TCPIP_CHECKSUM_EN_POS (1) + #define L3_L4_CTRL_TCPIP_CHECKSUM_EN_LEN (1) + #define L3_L4_CTRL_TCPIP_CHECKSUM_EN_MSK (0x2) + u8 l3_l4_ctrl; + + #define RING_CTRL_OVERRIDE_PREFETCH_THRSH_POS (0) + #define RING_CTRL_OVERRIDE_PREFETCH_THRSH_LEN (1) + #define RING_CTRL_OVERRIDE_PREFETCH_THRSH_MSK (0x1) + #define RING_CTRL_OVERRIDE_WB_THRSH_POS (1) + #define RING_CTRL_OVERRIDE_WB_THRSH_LEN (1) + #define RING_CTRL_OVERRIDE_WB_THRSH_MSK (0x2) + #define RING_CTRL_OVERRIDE_ITR_THRSH_POS (2) + #define RING_CTRL_OVERRIDE_ITR_THRSH_LEN (1) + #define RING_CTRL_OVERRIDE_ITR_THRSH_MSK (0x4) + #define RING_CTRL_OVERRIDE_HOST_THRSH_POS (3) + #define RING_CTRL_OVERRIDE_HOST_THRSH_LEN (1) + #define RING_CTRL_OVERRIDE_HOST_THRSH_MSK (0x8) + u8 ring_ctrl; + + __le16 prefetch_thrsh; + __le16 wb_thrsh; + __le32 itr_value; + __le16 host_thrsh; + u8 reserved[2]; + struct wmi_sniffer_cfg sniffer_cfg; +} __packed; + +/* + * WMI_RCP_ADDBA_RESP_CMDID + */ +struct wmi_rcp_addba_resp_cmd { + + #define CIDXTID_CID_POS (0) + #define CIDXTID_CID_LEN (4) + #define CIDXTID_CID_MSK (0xF) + #define CIDXTID_TID_POS (4) + #define CIDXTID_TID_LEN (4) + #define CIDXTID_TID_MSK (0xF0) + u8 cidxtid; + + u8 dialog_token; + __le16 status_code; + __le16 ba_param_set; /* ieee80211_ba_parameterset field to send */ + __le16 ba_timeout; +} __packed; + +/* + * WMI_RCP_DELBA_CMDID + */ +struct wmi_rcp_delba_cmd { + + #define CIDXTID_CID_POS (0) + #define CIDXTID_CID_LEN (4) + #define CIDXTID_CID_MSK (0xF) + #define CIDXTID_TID_POS (4) + #define CIDXTID_TID_LEN (4) + #define CIDXTID_TID_MSK (0xF0) + u8 cidxtid; + + u8 reserved; + __le16 reason; +} __packed; + +/* + * WMI_RCP_ADDBA_REQ_CMDID + */ +struct wmi_rcp_addba_req_cmd { + + #define CIDXTID_CID_POS (0) + #define CIDXTID_CID_LEN (4) + #define CIDXTID_CID_MSK (0xF) + #define CIDXTID_TID_POS (4) + #define CIDXTID_TID_LEN (4) + #define CIDXTID_TID_MSK (0xF0) + u8 cidxtid; + + u8 dialog_token; + /* ieee80211_ba_parameterset field as it received */ + __le16 ba_param_set; + __le16 ba_timeout; + /* ieee80211_ba_seqstrl field as it received */ + __le16 ba_seq_ctrl; +} __packed; + +/* + * WMI_SET_MAC_ADDRESS_CMDID + */ +struct wmi_set_mac_address_cmd { + u8 mac[WMI_MAC_LEN]; + u8 reserved[2]; +} __packed; + + +/* +* WMI_EAPOL_TX_CMDID +*/ +struct wmi_eapol_tx_cmd { + u8 dst_mac[WMI_MAC_LEN]; + __le16 eapol_len; + u8 eapol[0]; +} __packed; + +/* + * WMI_ECHO_CMDID + * + * Check FW is alive + * + * WMI_DEEP_ECHO_CMDID + * + * Check FW and ucode are alive + * + * Returned event: WMI_ECHO_RSP_EVENTID + * same event for both commands + */ +struct wmi_echo_cmd { + __le32 value; +} __packed; + +/* + * WMI Events + */ + +/* + * List of Events (target to host) + */ +enum wmi_event_id { + WMI_IMM_RSP_EVENTID = 0x0000, + WMI_READY_EVENTID = 0x1001, + WMI_CONNECT_EVENTID = 0x1002, + WMI_DISCONNECT_EVENTID = 0x1003, + WMI_SCAN_COMPLETE_EVENTID = 0x100a, + WMI_REPORT_STATISTICS_EVENTID = 0x100b, + WMI_RD_MEM_RSP_EVENTID = 0x1800, + WMI_FW_READY_EVENTID = 0x1801, + WMI_EXIT_FAST_MEM_ACC_MODE_EVENTID = 0x0200, + WMI_ECHO_RSP_EVENTID = 0x1803, + WMI_CONFIG_MAC_DONE_EVENTID = 0x1805, + WMI_CONFIG_PHY_DEBUG_DONE_EVENTID = 0x1806, + WMI_ADD_STATION_DONE_EVENTID = 0x1807, + WMI_ADD_DEBUG_TX_PCKT_DONE_EVENTID = 0x1808, + WMI_PHY_GET_STATISTICS_EVENTID = 0x1809, + WMI_FS_TUNE_DONE_EVENTID = 0x180a, + WMI_CORR_MEASURE_DONE_EVENTID = 0x180b, + WMI_TEMP_SENSE_DONE_EVENTID = 0x180e, + WMI_DC_CALIB_DONE_EVENTID = 0x180f, + WMI_IQ_TX_CALIB_DONE_EVENTID = 0x1811, + WMI_IQ_RX_CALIB_DONE_EVENTID = 0x1812, + WMI_SET_WORK_MODE_DONE_EVENTID = 0x1815, + WMI_LO_LEAKAGE_CALIB_DONE_EVENTID = 0x1816, + WMI_MARLON_R_ACTIVATE_DONE_EVENTID = 0x1817, + WMI_MARLON_R_READ_DONE_EVENTID = 0x1818, + WMI_MARLON_R_WRITE_DONE_EVENTID = 0x1819, + WMI_MARLON_R_TXRX_SEL_DONE_EVENTID = 0x181a, + WMI_SILENT_RSSI_CALIB_DONE_EVENTID = 0x181d, + + WMI_CFG_RX_CHAIN_DONE_EVENTID = 0x1820, + WMI_VRING_CFG_DONE_EVENTID = 0x1821, + WMI_RX_ON_DONE_EVENTID = 0x1822, + WMI_BA_STATUS_EVENTID = 0x1823, + WMI_RCP_ADDBA_REQ_EVENTID = 0x1824, + WMI_ADDBA_RESP_SENT_EVENTID = 0x1825, + WMI_DELBA_EVENTID = 0x1826, + WMI_GET_SSID_EVENTID = 0x1828, + WMI_GET_PCP_CHANNEL_EVENTID = 0x182a, + WMI_SW_TX_COMPLETE_EVENTID = 0x182b, + WMI_RX_OFF_DONE_EVENTID = 0x182c, + + WMI_READ_MAC_RXQ_EVENTID = 0x1830, + WMI_READ_MAC_TXQ_EVENTID = 0x1831, + WMI_WRITE_MAC_RXQ_EVENTID = 0x1832, + WMI_WRITE_MAC_TXQ_EVENTID = 0x1833, + WMI_WRITE_MAC_XQ_FIELD_EVENTID = 0x1834, + + WMI_BEAFORMING_MGMT_DONE_EVENTID = 0x1836, + WMI_BF_TXSS_MGMT_DONE_EVENTID = 0x1837, + WMI_BF_RXSS_MGMT_DONE_EVENTID = 0x1839, + WMI_RS_MGMT_DONE_EVENTID = 0x1852, + WMI_RF_MGMT_STATUS_EVENTID = 0x1853, + WMI_BF_SM_MGMT_DONE_EVENTID = 0x1838, + WMI_RX_MGMT_PACKET_EVENTID = 0x1840, + + /* Performance monitoring events */ + WMI_DATA_PORT_OPEN_EVENTID = 0x1860, + WMI_WBE_LINKDOWN_EVENTID = 0x1861, + + WMI_BF_CTRL_DONE_EVENTID = 0x1862, + WMI_NOTIFY_REQ_DONE_EVENTID = 0x1863, + WMI_GET_STATUS_DONE_EVENTID = 0x1864, + + WMI_UNIT_TEST_EVENTID = 0x1900, + WMI_FLASH_READ_DONE_EVENTID = 0x1902, + WMI_FLASH_WRITE_DONE_EVENTID = 0x1903, + + WMI_SET_CHANNEL_EVENTID = 0x9000, + WMI_ASSOC_REQ_EVENTID = 0x9001, + WMI_EAPOL_RX_EVENTID = 0x9002, + WMI_MAC_ADDR_RESP_EVENTID = 0x9003, + WMI_FW_VER_EVENTID = 0x9004, +}; + +/* + * Events data structures + */ + +/* + * WMI_RF_MGMT_STATUS_EVENTID + */ +enum wmi_rf_status { + WMI_RF_ENABLED = 0, + WMI_RF_DISABLED_HW = 1, + WMI_RF_DISABLED_SW = 2, + WMI_RF_DISABLED_HW_SW = 3, +}; + +struct wmi_rf_mgmt_status_event { + __le32 rf_status; +} __packed; + +/* + * WMI_GET_STATUS_DONE_EVENTID + */ +struct wmi_get_status_done_event { + __le32 is_associated; + u8 cid; + u8 reserved0[3]; + u8 bssid[WMI_MAC_LEN]; + u8 channel; + u8 reserved1; + u8 network_type; + u8 reserved2[3]; + __le32 ssid_len; + u8 ssid[WMI_MAX_SSID_LEN]; + __le32 rf_status; + __le32 is_secured; +} __packed; + +/* + * WMI_FW_VER_EVENTID + */ +struct wmi_fw_ver_event { + u8 major; + u8 minor; + __le16 subminor; + __le16 build; +} __packed; + +/* +* WMI_MAC_ADDR_RESP_EVENTID +*/ +struct wmi_mac_addr_resp_event { + u8 mac[WMI_MAC_LEN]; + u8 auth_mode; + u8 crypt_mode; + __le32 offload_mode; +} __packed; + +/* +* WMI_EAPOL_RX_EVENTID +*/ +struct wmi_eapol_rx_event { + u8 src_mac[WMI_MAC_LEN]; + __le16 eapol_len; + u8 eapol[0]; +} __packed; + +/* +* WMI_READY_EVENTID +*/ +enum wmi_phy_capability { + WMI_11A_CAPABILITY = 1, + WMI_11G_CAPABILITY = 2, + WMI_11AG_CAPABILITY = 3, + WMI_11NA_CAPABILITY = 4, + WMI_11NG_CAPABILITY = 5, + WMI_11NAG_CAPABILITY = 6, + WMI_11AD_CAPABILITY = 7, + WMI_11N_CAPABILITY_OFFSET = WMI_11NA_CAPABILITY - WMI_11A_CAPABILITY, +}; + +struct wmi_ready_event { + __le32 sw_version; + __le32 abi_version; + u8 mac[WMI_MAC_LEN]; + u8 phy_capability; /* enum wmi_phy_capability */ + u8 reserved; +} __packed; + +/* + * WMI_NOTIFY_REQ_DONE_EVENTID + */ +struct wmi_notify_req_done_event { + __le32 status; + __le64 tsf; + __le32 snr_val; + __le32 tx_tpt; + __le32 tx_goodput; + __le32 rx_goodput; + __le16 bf_mcs; + __le16 my_rx_sector; + __le16 my_tx_sector; + __le16 other_rx_sector; + __le16 other_tx_sector; + __le16 range; +} __packed; + +/* + * WMI_CONNECT_EVENTID + */ +struct wmi_connect_event { + u8 channel; + u8 reserved0; + u8 bssid[WMI_MAC_LEN]; + __le16 listen_interval; + __le16 beacon_interval; + u8 network_type; + u8 reserved1[3]; + u8 beacon_ie_len; + u8 assoc_req_len; + u8 assoc_resp_len; + u8 cid; + u8 reserved2[3]; + u8 assoc_info[0]; +} __packed; + +/* + * WMI_DISCONNECT_EVENTID + */ +enum wmi_disconnect_reason { + WMI_DIS_REASON_NO_NETWORK_AVAIL = 1, + WMI_DIS_REASON_LOST_LINK = 2, /* bmiss */ + WMI_DIS_REASON_DISCONNECT_CMD = 3, + WMI_DIS_REASON_BSS_DISCONNECTED = 4, + WMI_DIS_REASON_AUTH_FAILED = 5, + WMI_DIS_REASON_ASSOC_FAILED = 6, + WMI_DIS_REASON_NO_RESOURCES_AVAIL = 7, + WMI_DIS_REASON_CSERV_DISCONNECT = 8, + WMI_DIS_REASON_INVALID_PROFILE = 10, + WMI_DIS_REASON_DOT11H_CHANNEL_SWITCH = 11, + WMI_DIS_REASON_PROFILE_MISMATCH = 12, + WMI_DIS_REASON_CONNECTION_EVICTED = 13, + WMI_DIS_REASON_IBSS_MERGE = 14, +}; + +struct wmi_disconnect_event { + __le16 protocol_reason_status; /* reason code, see 802.11 spec. */ + u8 bssid[WMI_MAC_LEN]; /* set if known */ + u8 disconnect_reason; /* see wmi_disconnect_reason_e */ + u8 assoc_resp_len; + u8 assoc_info[0]; +} __packed; + +/* + * WMI_SCAN_COMPLETE_EVENTID + */ +struct wmi_scan_complete_event { + __le32 status; +} __packed; + +/* + * WMI_BA_STATUS_EVENTID + */ +enum wmi_vring_ba_status { + WMI_BA_AGREED = 0, + WMI_BA_NON_AGREED = 1, +}; + +struct wmi_vring_ba_status_event { + __le16 status; + u8 reserved[2]; + u8 ringid; + u8 agg_wsize; + __le16 ba_timeout; +} __packed; + +/* + * WMI_DELBA_EVENTID + */ +struct wmi_delba_event { + + #define CIDXTID_CID_POS (0) + #define CIDXTID_CID_LEN (4) + #define CIDXTID_CID_MSK (0xF) + #define CIDXTID_TID_POS (4) + #define CIDXTID_TID_LEN (4) + #define CIDXTID_TID_MSK (0xF0) + u8 cidxtid; + + u8 from_initiator; + __le16 reason; +} __packed; + +/* + * WMI_VRING_CFG_DONE_EVENTID + */ +enum wmi_vring_cfg_done_event_status { + WMI_VRING_CFG_SUCCESS = 0, + WMI_VRING_CFG_FAILURE = 1, +}; + +struct wmi_vring_cfg_done_event { + u8 ringid; + u8 status; + u8 reserved[2]; + __le32 tx_vring_tail_ptr; +} __packed; + +/* + * WMI_ADDBA_RESP_SENT_EVENTID + */ +enum wmi_rcp_addba_resp_sent_event_status { + WMI_ADDBA_SUCCESS = 0, + WMI_ADDBA_FAIL = 1, +}; + +struct wmi_rcp_addba_resp_sent_event { + + #define CIDXTID_CID_POS (0) + #define CIDXTID_CID_LEN (4) + #define CIDXTID_CID_MSK (0xF) + #define CIDXTID_TID_POS (4) + #define CIDXTID_TID_LEN (4) + #define CIDXTID_TID_MSK (0xF0) + u8 cidxtid; + + u8 reserved; + __le16 status; +} __packed; + +/* + * WMI_RCP_ADDBA_REQ_EVENTID + */ +struct wmi_rcp_addba_req_event { + + #define CIDXTID_CID_POS (0) + #define CIDXTID_CID_LEN (4) + #define CIDXTID_CID_MSK (0xF) + #define CIDXTID_TID_POS (4) + #define CIDXTID_TID_LEN (4) + #define CIDXTID_TID_MSK (0xF0) + u8 cidxtid; + + u8 dialog_token; + __le16 ba_param_set; /* ieee80211_ba_parameterset as it received */ + __le16 ba_timeout; + __le16 ba_seq_ctrl; /* ieee80211_ba_seqstrl field as it received */ +} __packed; + +/* + * WMI_CFG_RX_CHAIN_DONE_EVENTID + */ +enum wmi_cfg_rx_chain_done_event_status { + WMI_CFG_RX_CHAIN_SUCCESS = 1, +}; + +struct wmi_cfg_rx_chain_done_event { + __le32 rx_ring_tail_ptr; /* Rx V-Ring Tail pointer */ + __le32 status; +} __packed; + +/* + * WMI_WBE_LINKDOWN_EVENTID + */ +enum wmi_wbe_link_down_event_reason { + WMI_WBE_REASON_USER_REQUEST = 0, + WMI_WBE_REASON_RX_DISASSOC = 1, + WMI_WBE_REASON_BAD_PHY_LINK = 2, +}; + +struct wmi_wbe_link_down_event { + u8 cid; + u8 reserved[3]; + __le32 reason; +} __packed; + +/* + * WMI_DATA_PORT_OPEN_EVENTID + */ +struct wmi_data_port_open_event { + u8 cid; + u8 reserved[3]; +} __packed; + +/* + * WMI_GET_PCP_CHANNEL_EVENTID + */ +struct wmi_get_pcp_channel_event { + u8 channel; + u8 reserved[3]; +} __packed; + +/* + * WMI_SW_TX_COMPLETE_EVENTID + */ +enum wmi_sw_tx_status { + WMI_TX_SW_STATUS_SUCCESS = 0, + WMI_TX_SW_STATUS_FAILED_NO_RESOURCES = 1, + WMI_TX_SW_STATUS_FAILED_TX = 2, +}; + +struct wmi_sw_tx_complete_event { + u8 status; /* enum wmi_sw_tx_status */ + u8 reserved[3]; +} __packed; + +/* + * WMI_GET_SSID_EVENTID + */ +struct wmi_get_ssid_event { + __le32 ssid_len; + u8 ssid[WMI_MAX_SSID_LEN]; +} __packed; + +/* + * WMI_RX_MGMT_PACKET_EVENTID + */ +struct wmi_rx_mgmt_info { + u8 mcs; + s8 snr; + __le16 range; + __le16 stype; + __le16 status; + __le32 len; + u8 qid; + u8 mid; + u8 cid; + u8 channel; /* From Radio MNGR */ +} __packed; + +struct wmi_rx_mgmt_packet_event { + struct wmi_rx_mgmt_info info; + u8 payload[0]; +} __packed; + +/* + * WMI_ECHO_RSP_EVENTID + */ +struct wmi_echo_event { + __le32 echoed_value; +} __packed; + +#endif /* __WILOCITY_WMI_H__ */ From 267f8fa2e1eef0612b2007e1f1846bcbc35cc1fa Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 4 Jan 2013 21:18:12 +0000 Subject: [PATCH 099/553] ASoC: wm2000: Fix sense of speech clarity enable Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm2000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c index 1cbe88f01d63..12bcae63a7f0 100644 --- a/sound/soc/codecs/wm2000.c +++ b/sound/soc/codecs/wm2000.c @@ -209,9 +209,9 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue) ret = wm2000_read(i2c, WM2000_REG_SPEECH_CLARITY); if (wm2000->speech_clarity) - ret &= ~WM2000_SPEECH_CLARITY; - else ret |= WM2000_SPEECH_CLARITY; + else + ret &= ~WM2000_SPEECH_CLARITY; wm2000_write(i2c, WM2000_REG_SPEECH_CLARITY, ret); wm2000_write(i2c, WM2000_REG_SYS_START0, 0x33); From ac706bf75cb99b91bf2792c52ab5b2e4b94560a1 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 17 Dec 2012 07:38:16 -0300 Subject: [PATCH 100/553] [media] v4l: vb2: Set data_offset to 0 for single-plane output buffers Single-planar V4L2 buffers are converted to multi-planar vb2 buffers with a single plane when queued. The plane data_offset field is not available in the single-planar API and must be set to 0 for all output buffers. Signed-off-by: Laurent Pinchart Acked-by: Marek Szyprowski Signed-off-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- drivers/media/v4l2-core/videobuf2-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 9f81be23a81f..e02c4797b1c6 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -921,8 +921,10 @@ static void __fill_vb2_buffer(struct vb2_buffer *vb, const struct v4l2_buffer *b * In videobuf we use our internal V4l2_planes struct for * single-planar buffers as well, for simplicity. */ - if (V4L2_TYPE_IS_OUTPUT(b->type)) + if (V4L2_TYPE_IS_OUTPUT(b->type)) { v4l2_planes[0].bytesused = b->bytesused; + v4l2_planes[0].data_offset = 0; + } if (b->memory == V4L2_MEMORY_USERPTR) { v4l2_planes[0].m.userptr = b->m.userptr; From 12861dc659c7181e0b52facd97df70c6dd326106 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 5 Dec 2012 12:49:12 -0300 Subject: [PATCH 101/553] [media] m5mols: Fix typo in get_fmt callback The check of return value from __find_format() was inverted by mistake. This patch fixes regression introduced in commit 5565a2ad47 [media] m5mols: Protect driver data with a mutex Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/m5mols/m5mols_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/i2c/m5mols/m5mols_core.c b/drivers/media/i2c/m5mols/m5mols_core.c index 8131d651de9e..b9b448559409 100644 --- a/drivers/media/i2c/m5mols/m5mols_core.c +++ b/drivers/media/i2c/m5mols/m5mols_core.c @@ -556,7 +556,7 @@ static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, mutex_lock(&info->lock); format = __find_format(info, fh, fmt->which, info->res_type); - if (!format) + if (format) fmt->format = *format; else ret = -EINVAL; From a26860bdbd632278bbbcc2261b4c28f965472741 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 5 Dec 2012 13:43:05 -0300 Subject: [PATCH 102/553] [media] s5p-fimc: Fix return value of __fimc_md_create_flite_source_links() Make sure 'ret' is not used uninitialized. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-fimc/fimc-mdevice.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/platform/s5p-fimc/fimc-mdevice.c b/drivers/media/platform/s5p-fimc/fimc-mdevice.c index 1bd5678cfeb9..3b74c4aaa854 100644 --- a/drivers/media/platform/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/platform/s5p-fimc/fimc-mdevice.c @@ -593,7 +593,7 @@ static int __fimc_md_create_flite_source_links(struct fimc_md *fmd) { struct media_entity *source, *sink; unsigned int flags = MEDIA_LNK_FL_ENABLED; - int i, ret; + int i, ret = 0; for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) { struct fimc_lite *fimc = fmd->fimc_lite[i]; From 7296e25f6e76bedc96cb1f16c200e9ac7a87323b Mon Sep 17 00:00:00 2001 From: Kamil Debski Date: Fri, 21 Dec 2012 05:32:59 -0300 Subject: [PATCH 103/553] [media] s5p-mfc: Fix interrupt error handling routine New context states were added but handling in s5p_mfc_handle_error for these states was not. After this patch these states are be handled correctly. Signed-off-by: Kamil Debski Signed-off-by: Kyungmin Park Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-mfc/s5p_mfc.c | 88 ++++++++++-------------- 1 file changed, 37 insertions(+), 51 deletions(-) diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index 3afe879d54d7..5448ad1ea248 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -412,62 +412,48 @@ leave_handle_frame: } /* Error handling for interrupt */ -static void s5p_mfc_handle_error(struct s5p_mfc_ctx *ctx, - unsigned int reason, unsigned int err) +static void s5p_mfc_handle_error(struct s5p_mfc_dev *dev, + struct s5p_mfc_ctx *ctx, unsigned int reason, unsigned int err) { - struct s5p_mfc_dev *dev; unsigned long flags; - /* If no context is available then all necessary - * processing has been done. */ - if (ctx == NULL) - return; - - dev = ctx->dev; mfc_err("Interrupt Error: %08x\n", err); - s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); - wake_up_dev(dev, reason, err); - /* Error recovery is dependent on the state of context */ - switch (ctx->state) { - case MFCINST_INIT: - /* This error had to happen while acquireing instance */ - case MFCINST_GOT_INST: - /* This error had to happen while parsing the header */ - case MFCINST_HEAD_PARSED: - /* This error had to happen while setting dst buffers */ - case MFCINST_RETURN_INST: - /* This error had to happen while releasing instance */ - clear_work_bit(ctx); - wake_up_ctx(ctx, reason, err); - if (test_and_clear_bit(0, &dev->hw_lock) == 0) - BUG(); - s5p_mfc_clock_off(); - ctx->state = MFCINST_ERROR; - break; - case MFCINST_FINISHING: - case MFCINST_FINISHED: - case MFCINST_RUNNING: - /* It is higly probable that an error occured - * while decoding a frame */ - clear_work_bit(ctx); - ctx->state = MFCINST_ERROR; - /* Mark all dst buffers as having an error */ - spin_lock_irqsave(&dev->irqlock, flags); - s5p_mfc_hw_call(dev->mfc_ops, cleanup_queue, &ctx->dst_queue, - &ctx->vq_dst); - /* Mark all src buffers as having an error */ - s5p_mfc_hw_call(dev->mfc_ops, cleanup_queue, &ctx->src_queue, - &ctx->vq_src); - spin_unlock_irqrestore(&dev->irqlock, flags); - if (test_and_clear_bit(0, &dev->hw_lock) == 0) - BUG(); - s5p_mfc_clock_off(); - break; - default: - mfc_err("Encountered an error interrupt which had not been handled\n"); - break; + if (ctx != NULL) { + /* Error recovery is dependent on the state of context */ + switch (ctx->state) { + case MFCINST_RES_CHANGE_INIT: + case MFCINST_RES_CHANGE_FLUSH: + case MFCINST_RES_CHANGE_END: + case MFCINST_FINISHING: + case MFCINST_FINISHED: + case MFCINST_RUNNING: + /* It is higly probable that an error occured + * while decoding a frame */ + clear_work_bit(ctx); + ctx->state = MFCINST_ERROR; + /* Mark all dst buffers as having an error */ + spin_lock_irqsave(&dev->irqlock, flags); + s5p_mfc_hw_call(dev->mfc_ops, cleanup_queue, + &ctx->dst_queue, &ctx->vq_dst); + /* Mark all src buffers as having an error */ + s5p_mfc_hw_call(dev->mfc_ops, cleanup_queue, + &ctx->src_queue, &ctx->vq_src); + spin_unlock_irqrestore(&dev->irqlock, flags); + wake_up_ctx(ctx, reason, err); + break; + default: + clear_work_bit(ctx); + ctx->state = MFCINST_ERROR; + wake_up_ctx(ctx, reason, err); + break; + } } + if (test_and_clear_bit(0, &dev->hw_lock) == 0) + BUG(); + s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); + s5p_mfc_clock_off(); + wake_up_dev(dev, reason, err); return; } @@ -632,7 +618,7 @@ static irqreturn_t s5p_mfc_irq(int irq, void *priv) dev->warn_start) s5p_mfc_handle_frame(ctx, reason, err); else - s5p_mfc_handle_error(ctx, reason, err); + s5p_mfc_handle_error(dev, ctx, reason, err); clear_bit(0, &dev->enter_suspend); break; From d591390da94234d5b8eb1bbd9f2a25d2e780d528 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Sat, 22 Dec 2012 04:09:17 +0000 Subject: [PATCH 104/553] KVM: PPC: Book3S HV: Fix compilation without CONFIG_PPC_POWERNV MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes this build breakage: arch/powerpc/kvm/book3s_hv_ras.c: In function ‘kvmppc_realmode_mc_power7’: arch/powerpc/kvm/book3s_hv_ras.c:126:23: error: ‘struct paca_struct’ has no member named ‘opal_mc_evt’ Signed-off-by: Andreas Schwab Signed-off-by: Alexander Graf --- arch/powerpc/kvm/book3s_hv_ras.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/kvm/book3s_hv_ras.c b/arch/powerpc/kvm/book3s_hv_ras.c index 35f3cf0269b3..a353c485808c 100644 --- a/arch/powerpc/kvm/book3s_hv_ras.c +++ b/arch/powerpc/kvm/book3s_hv_ras.c @@ -79,7 +79,9 @@ static void flush_tlb_power7(struct kvm_vcpu *vcpu) static long kvmppc_realmode_mc_power7(struct kvm_vcpu *vcpu) { unsigned long srr1 = vcpu->arch.shregs.msr; +#ifdef CONFIG_PPC_POWERNV struct opal_machine_check_event *opal_evt; +#endif long handled = 1; if (srr1 & SRR1_MC_LDSTERR) { @@ -117,6 +119,7 @@ static long kvmppc_realmode_mc_power7(struct kvm_vcpu *vcpu) handled = 0; } +#ifdef CONFIG_PPC_POWERNV /* * See if OPAL has already handled the condition. * We assume that if the condition is recovered then OPAL @@ -131,6 +134,7 @@ static long kvmppc_realmode_mc_power7(struct kvm_vcpu *vcpu) if (handled) opal_evt->in_use = 0; +#endif return handled; } From 216c82c6aba63eeb49d7654b448e0d47bea255bb Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 3 Jan 2013 17:23:24 -0300 Subject: [PATCH 105/553] [media] omap3isp: Don't include The plat/*.h headers are not available to drivers in multiplatform kernels. As the header isn't needed, just remove it. Signed-off-by: Laurent Pinchart Acked-by: Tony Lindgren Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/omap3isp/isp.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c index b34bf928d80c..48182e6c7ca2 100644 --- a/drivers/media/platform/omap3isp/isp.c +++ b/drivers/media/platform/omap3isp/isp.c @@ -70,8 +70,6 @@ #include #include -#include - #include "isp.h" #include "ispreg.h" #include "ispccdc.h" From ac4989874af56435c308bdde9ad9c837a26f8b23 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 25 Oct 2012 10:22:32 -0600 Subject: [PATCH 106/553] ioat: Fix DMA memory sync direction correct flag ioat does DMA memory sync with DMA_TO_DEVICE direction on a buffer allocated for DMA_FROM_DEVICE dma, resulting in the following warning from dma debug. Fixed the dma_sync_single_for_device() call to use the correct direction. [ 226.288947] WARNING: at lib/dma-debug.c:990 check_sync+0x132/0x550() [ 226.288948] Hardware name: ProLiant DL380p Gen8 [ 226.288951] ioatdma 0000:00:04.0: DMA-API: device driver syncs DMA memory with different direction [device address=0x00000000ffff7000] [size=4096 bytes] [mapped with DMA_FROM_DEVICE] [synced with DMA_TO_DEVICE] [ 226.288953] Modules linked in: iTCO_wdt(+) sb_edac(+) ioatdma(+) microcode serio_raw pcspkr edac_core hpwdt(+) iTCO_vendor_support hpilo(+) dca acpi_power_meter ata_generic pata_acpi sd_mod crc_t10dif ata_piix libata hpsa tg3 netxen_nic(+) sunrpc dm_mirror dm_region_hash dm_log dm_mod [ 226.288967] Pid: 1055, comm: work_for_cpu Tainted: G W 3.3.0-0.20.el7.x86_64 #1 [ 226.288968] Call Trace: [ 226.288974] [] warn_slowpath_common+0x7f/0xc0 [ 226.288977] [] warn_slowpath_fmt+0x46/0x50 [ 226.288980] [] check_sync+0x132/0x550 [ 226.288983] [] debug_dma_sync_single_for_device+0x3f/0x50 [ 226.288988] [] ? wait_for_common+0x72/0x180 [ 226.288995] [] ioat_xor_val_self_test+0x3e5/0x832 [ioatdma] [ 226.288999] [] ? kfree+0x259/0x270 [ 226.289004] [] ioat3_dma_self_test+0x1b/0x20 [ioatdma] [ 226.289008] [] ioat_probe+0x2f8/0x348 [ioatdma] [ 226.289011] [] ioat3_dma_probe+0x1d5/0x2aa [ioatdma] [ 226.289016] [] ioat_pci_probe+0x139/0x17c [ioatdma] [ 226.289020] [] local_pci_probe+0x5c/0xd0 [ 226.289023] [] ? destroy_work_on_stack+0x20/0x20 [ 226.289025] [] do_work_for_cpu+0x18/0x30 [ 226.289029] [] kthread+0xb7/0xc0 [ 226.289033] [] kernel_thread_helper+0x4/0x10 [ 226.289036] [] ? _raw_spin_unlock_irq+0x30/0x50 [ 226.289038] [] ? retint_restore_args+0x13/0x13 [ 226.289041] [] ? kthread_worker_fn+0x1a0/0x1a0 [ 226.289044] [] ? gs_change+0x13/0x13 [ 226.289045] ---[ end trace e1618afc7a606089 ]--- [ 226.289047] Mapped at: [ 226.289048] [] debug_dma_map_page+0x87/0x150 [ 226.289050] [] dma_map_page.constprop.18+0x70/0xb34 [ioatdma] [ 226.289054] [] ioat_xor_val_self_test+0x1d8/0x832 [ioatdma] [ 226.289058] [] ioat3_dma_self_test+0x1b/0x20 [ioatdma] [ 226.289061] [] ioat_probe+0x2f8/0x348 [ioatdma] Signed-off-by: Shuah Khan CC: Signed-off-by: Vinod Koul --- drivers/dma/ioat/dma_v3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index f7f1dc62c15c..ed0e8b796a93 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -951,7 +951,7 @@ static int __devinit ioat_xor_val_self_test(struct ioatdma_device *device) goto free_resources; } } - dma_sync_single_for_device(dev, dest_dma, PAGE_SIZE, DMA_TO_DEVICE); + dma_sync_single_for_device(dev, dest_dma, PAGE_SIZE, DMA_FROM_DEVICE); /* skip validate if the capability is not present */ if (!dma_has_cap(DMA_XOR_VAL, dma_chan->device->cap_mask)) From 14c9bc6fba3f44e89f8bb66b0290dbcf36832607 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 22 Oct 2012 15:34:41 +1000 Subject: [PATCH 107/553] m68knommu: add KMAP definitions for non-MMU definitions To be consistent with the set of MMU definitions we should define KMAP_START and KMAP_END. Future common m68k code will use their values. Signed-off-by: Greg Ungerer Acked-by: Geert Uytterhoeven --- arch/m68k/include/asm/pgtable_no.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/m68k/include/asm/pgtable_no.h b/arch/m68k/include/asm/pgtable_no.h index bf86b29fe64a..037028f4ab70 100644 --- a/arch/m68k/include/asm/pgtable_no.h +++ b/arch/m68k/include/asm/pgtable_no.h @@ -64,6 +64,8 @@ extern unsigned int kobjsize(const void *objp); */ #define VMALLOC_START 0 #define VMALLOC_END 0xffffffff +#define KMAP_START 0 +#define KMAP_END 0xffffffff #include From d6fccc756328441511c2b752d394a2b3dae4ec31 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 7 Jan 2013 16:13:04 +1000 Subject: [PATCH 108/553] m68k: fix conditional use of init_pointer_table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Compiling 3.8-rc1 fails for some m68k targets (the non-mmu ones) with: CC arch/m68k/mm/init.o arch/m68k/mm/init.c: In function ‘mem_init’: arch/m68k/mm/init.c:191:2: error: implicit declaration of function ‘init_pointer_table’ arch/m68k/mm/init.c:191:36: error: ‘kernel_pg_dir’ undeclared (first use in this function) arch/m68k/mm/init.c:191:36: note: each undeclared identifier is reported only once for each function it appears in arch/m68k/mm/init.c:192:18: error: ‘PTRS_PER_PGD’ undeclared (first use in this function) arch/m68k/mm/init.c:194:4: error: implicit declaration of function ‘__pgd_page’ arch/m68k/mm/init.c:198:6: error: ‘zero_pgtable’ undeclared (first use in this function) make[2]: *** [arch/m68k/mm/init.o] Error 1 make[1]: *** [arch/m68k/mm] Error 2 make[1]: Leaving directory `/home/gerg/new-wave.git/linux-3.x' make: *** [linux] Error 1 Change the conditions that define init_pointer_table so that it matches what actually uses it. Signed-off-by: Greg Ungerer --- arch/m68k/mm/init.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c index f0e05bce92f2..afd8106fd83b 100644 --- a/arch/m68k/mm/init.c +++ b/arch/m68k/mm/init.c @@ -39,6 +39,11 @@ void *empty_zero_page; EXPORT_SYMBOL(empty_zero_page); +#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) +extern void init_pointer_table(unsigned long ptable); +extern pmd_t *zero_pgtable; +#endif + #ifdef CONFIG_MMU pg_data_t pg_data_map[MAX_NUMNODES]; @@ -69,9 +74,6 @@ void __init m68k_setup_node(int node) node_set_online(node); } -extern void init_pointer_table(unsigned long ptable); -extern pmd_t *zero_pgtable; - #else /* CONFIG_MMU */ /* From 93be8788e648817d62fda33e2998eb6ca6ebf3a3 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 2 Jan 2013 10:31:22 +0000 Subject: [PATCH 109/553] drm/i915; Only increment the user-pin-count after successfully pinning the bo As along the error path we do not correct the user pin-count for the failure, we may end up with userspace believing that it has a pinned object at offset 0 (when interrupted by a signal for example). Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index da3c82e301b1..5791ecd908a5 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3522,14 +3522,15 @@ i915_gem_pin_ioctl(struct drm_device *dev, void *data, goto out; } - obj->user_pin_count++; - obj->pin_filp = file; - if (obj->user_pin_count == 1) { + if (obj->user_pin_count == 0) { ret = i915_gem_object_pin(obj, args->alignment, true, false); if (ret) goto out; } + obj->user_pin_count++; + obj->pin_filp = file; + /* XXX - flush the CPU caches for pinned objects * as the X server doesn't manage domains yet */ From 48e858340dae43189a4e55647f6eac736766f828 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 7 Jan 2013 10:27:13 +0100 Subject: [PATCH 110/553] Revert "drm/i915: no lvds quirk for Zotac ZDBOX SD ID12/ID13" This reverts commit 9756fe38d10b2bf90c81dc4d2f17d5632e135364. The bogus lvds output is actually a lvds->hdmi bridge, which we don't really support. But unconditionally disabling it breaks some existing setups. Reported-by: John Tapsell References: http://permalink.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/17237 Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_lvds.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index b9a660a53677..17aee74258ad 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -774,14 +774,6 @@ static const struct dmi_system_id intel_no_lvds[] = { DMI_MATCH(DMI_BOARD_NAME, "MS-7469"), }, }, - { - .callback = intel_no_lvds_dmi_callback, - .ident = "ZOTAC ZBOXSD-ID12/ID13", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ZOTAC"), - DMI_MATCH(DMI_BOARD_NAME, "ZBOXSD-ID12/ID13"), - }, - }, { .callback = intel_no_lvds_dmi_callback, .ident = "Gigabyte GA-D525TUD", From 3490ea5de6ac4af309c3df8a26a5cca61306334c Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 7 Jan 2013 10:11:40 +0000 Subject: [PATCH 111/553] drm/i915: Treat crtc->mode.clock == 0 as disabled Prevent a divide-by-zero by consistently treating an 'active' CRTC without a mode set as actually disabled. This looks to have been first introduced with commit 24929352481f085c5f85d4d4cbc919ddf106d381 Author: Daniel Vetter Date: Mon Jul 2 20:28:59 2012 +0200 drm/i915: read out the modeset hw state at load and resume time but then combined with commit b0a2658acb5bf9ca86b4aab011b7106de3af0add Author: Daniel Vetter Date: Tue Dec 18 09:37:54 2012 +0100 drm/i915: don't disable disconnected outputs it finally started oopsing. Signed-off-by: Chris Wilson Reported-and-tested-by: Alexey Zaytsev Tested-by: Sedat Dilek Cc: Daniel Vetter Cc: Jesse Barnes Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index e6f54ffab3ba..e83a11794172 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -44,6 +44,14 @@ * i915.i915_enable_fbc parameter */ +static bool intel_crtc_active(struct drm_crtc *crtc) +{ + /* Be paranoid as we can arrive here with only partial + * state retrieved from the hardware during setup. + */ + return to_intel_crtc(crtc)->active && crtc->fb && crtc->mode.clock; +} + static void i8xx_disable_fbc(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -405,9 +413,8 @@ void intel_update_fbc(struct drm_device *dev) * - going to an unsupported config (interlace, pixel multiply, etc.) */ list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) { - if (to_intel_crtc(tmp_crtc)->active && - !to_intel_crtc(tmp_crtc)->primary_disabled && - tmp_crtc->fb) { + if (intel_crtc_active(tmp_crtc) && + !to_intel_crtc(tmp_crtc)->primary_disabled) { if (crtc) { DRM_DEBUG_KMS("more than one pipe active, disabling compression\n"); dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES; @@ -992,7 +999,7 @@ static struct drm_crtc *single_enabled_crtc(struct drm_device *dev) struct drm_crtc *crtc, *enabled = NULL; list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - if (to_intel_crtc(crtc)->active && crtc->fb) { + if (intel_crtc_active(crtc)) { if (enabled) return NULL; enabled = crtc; @@ -1086,7 +1093,7 @@ static bool g4x_compute_wm0(struct drm_device *dev, int entries, tlb_miss; crtc = intel_get_crtc_for_plane(dev, plane); - if (crtc->fb == NULL || !to_intel_crtc(crtc)->active) { + if (!intel_crtc_active(crtc)) { *cursor_wm = cursor->guard_size; *plane_wm = display->guard_size; return false; @@ -1215,7 +1222,7 @@ static bool vlv_compute_drain_latency(struct drm_device *dev, int entries; crtc = intel_get_crtc_for_plane(dev, plane); - if (crtc->fb == NULL || !to_intel_crtc(crtc)->active) + if (!intel_crtc_active(crtc)) return false; clock = crtc->mode.clock; /* VESA DOT Clock */ @@ -1476,7 +1483,7 @@ static void i9xx_update_wm(struct drm_device *dev) fifo_size = dev_priv->display.get_fifo_size(dev, 0); crtc = intel_get_crtc_for_plane(dev, 0); - if (to_intel_crtc(crtc)->active && crtc->fb) { + if (intel_crtc_active(crtc)) { int cpp = crtc->fb->bits_per_pixel / 8; if (IS_GEN2(dev)) cpp = 4; @@ -1490,7 +1497,7 @@ static void i9xx_update_wm(struct drm_device *dev) fifo_size = dev_priv->display.get_fifo_size(dev, 1); crtc = intel_get_crtc_for_plane(dev, 1); - if (to_intel_crtc(crtc)->active && crtc->fb) { + if (intel_crtc_active(crtc)) { int cpp = crtc->fb->bits_per_pixel / 8; if (IS_GEN2(dev)) cpp = 4; @@ -2044,7 +2051,7 @@ sandybridge_compute_sprite_wm(struct drm_device *dev, int plane, int entries, tlb_miss; crtc = intel_get_crtc_for_plane(dev, plane); - if (crtc->fb == NULL || !to_intel_crtc(crtc)->active) { + if (!intel_crtc_active(crtc)) { *sprite_wm = display->guard_size; return false; } From 182ae55c1285080086cf4ef969ad09d84e00237f Mon Sep 17 00:00:00 2001 From: "Lee, Chun-Yi" Date: Fri, 14 Dec 2012 16:14:24 +0800 Subject: [PATCH 112/553] MAINTAINERS: change the mail address of acer-wmi/msi-laptop maintainer Due to I moved to use suse.com mail address, so, add patch to change the mail address in MAINTAINERS file. Cc: Matthew Garrett Signed-off-by: Lee, Chun-Yi Signed-off-by: Matthew Garrett --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 915564eda145..3a21fe7213b9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -228,7 +228,7 @@ S: Maintained F: drivers/platform/x86/acerhdf.c ACER WMI LAPTOP EXTRAS -M: Joey Lee +M: "Lee, Chun-Yi" L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/acer-wmi.c @@ -5077,7 +5077,7 @@ S: Maintained F: drivers/media/radio/radio-mr800.c MSI LAPTOP SUPPORT -M: "Lee, Chun-Yi" +M: "Lee, Chun-Yi" L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/msi-laptop.c From f20aaba9819d0801fb1314363f97239da0100bac Mon Sep 17 00:00:00 2001 From: "Lee, Chun-Yi" Date: Fri, 14 Dec 2012 16:14:26 +0800 Subject: [PATCH 113/553] acer-wmi: fix obj is NULL but dereferenced Fengguang Wu run coccinelle and warns about: drivers/platform/x86/acer-wmi.c:1200:17-21: ERROR: obj is NULL but dereferenced. drivers/platform/x86/acer-wmi.c:891:17-21: ERROR: obj is NULL but dereferenced. drivers/platform/x86/acer-wmi.c:1953:17-21: ERROR: obj is NULL but dereferenced. It causes by the code in patch 987dfbaa65b2c3568b85e29d2598da08a011ee09 doesn't check obj variable should not be NULL. There have risk for dereference a NULL obj, so add this patch to fix. Cc: Carlos Corbacho Cc: Matthew Garrett Cc: Dmitry Torokhov Cc: Corentin Chary Cc: Thomas Renninger Signed-off-by: Lee, Chun-Yi Signed-off-by: Matthew Garrett --- drivers/platform/x86/acer-wmi.c | 46 ++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 21 deletions(-) diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 06f4eb7ab87e..ff0a866791ca 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -875,7 +875,7 @@ WMI_execute_u32(u32 method_id, u32 in, u32 *out) struct acpi_buffer input = { (acpi_size) sizeof(u32), (void *)(&in) }; struct acpi_buffer result = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; - u32 tmp; + u32 tmp = 0; acpi_status status; status = wmi_evaluate_method(WMID_GUID1, 1, method_id, &input, &result); @@ -884,14 +884,14 @@ WMI_execute_u32(u32 method_id, u32 in, u32 *out) return status; obj = (union acpi_object *) result.pointer; - if (obj && obj->type == ACPI_TYPE_BUFFER && - (obj->buffer.length == sizeof(u32) || - obj->buffer.length == sizeof(u64))) { - tmp = *((u32 *) obj->buffer.pointer); - } else if (obj->type == ACPI_TYPE_INTEGER) { - tmp = (u32) obj->integer.value; - } else { - tmp = 0; + if (obj) { + if (obj->type == ACPI_TYPE_BUFFER && + (obj->buffer.length == sizeof(u32) || + obj->buffer.length == sizeof(u64))) { + tmp = *((u32 *) obj->buffer.pointer); + } else if (obj->type == ACPI_TYPE_INTEGER) { + tmp = (u32) obj->integer.value; + } } if (out) @@ -1193,12 +1193,14 @@ static acpi_status WMID_set_capabilities(void) return status; obj = (union acpi_object *) out.pointer; - if (obj && obj->type == ACPI_TYPE_BUFFER && - (obj->buffer.length == sizeof(u32) || - obj->buffer.length == sizeof(u64))) { - devices = *((u32 *) obj->buffer.pointer); - } else if (obj->type == ACPI_TYPE_INTEGER) { - devices = (u32) obj->integer.value; + if (obj) { + if (obj->type == ACPI_TYPE_BUFFER && + (obj->buffer.length == sizeof(u32) || + obj->buffer.length == sizeof(u64))) { + devices = *((u32 *) obj->buffer.pointer); + } else if (obj->type == ACPI_TYPE_INTEGER) { + devices = (u32) obj->integer.value; + } } else { kfree(out.pointer); return AE_ERROR; @@ -1946,12 +1948,14 @@ static u32 get_wmid_devices(void) return 0; obj = (union acpi_object *) out.pointer; - if (obj && obj->type == ACPI_TYPE_BUFFER && - (obj->buffer.length == sizeof(u32) || - obj->buffer.length == sizeof(u64))) { - devices = *((u32 *) obj->buffer.pointer); - } else if (obj->type == ACPI_TYPE_INTEGER) { - devices = (u32) obj->integer.value; + if (obj) { + if (obj->type == ACPI_TYPE_BUFFER && + (obj->buffer.length == sizeof(u32) || + obj->buffer.length == sizeof(u64))) { + devices = *((u32 *) obj->buffer.pointer); + } else if (obj->type == ACPI_TYPE_INTEGER) { + devices = (u32) obj->integer.value; + } } kfree(out.pointer); From 8e2286ce073f8f40794669956de8fe92da1d9da0 Mon Sep 17 00:00:00 2001 From: "Lee, Chun-Yi" Date: Fri, 14 Dec 2012 16:14:27 +0800 Subject: [PATCH 114/553] acer-wmi: change to emit touchpad on off key KEY_TOUCHPAD_TOOGLE key is for notice userland change touchpad state via xf86-input-synaptics on the machine that don't toggle touchpad in hardware. But, acer laptop actually toggle touchpad in hardware. So, this patch change to emit KEY_TOUCHPAD_ON/OFF key when acer-wmi grab device state of touchpad. Reference: brc#848270 https://bugzilla.redhat.com/show_bug.cgi?id=848270 Tested-by: Nathanael Noblet Cc: Carlos Corbacho Cc: Matthew Garrett Cc: Dmitry Torokhov Cc: Corentin Chary Cc: Thomas Renninger Signed-off-by: Lee, Chun-Yi Signed-off-by: Matthew Garrett --- drivers/platform/x86/acer-wmi.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index ff0a866791ca..44f62b24f0a1 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -125,7 +125,9 @@ static const struct key_entry acer_wmi_keymap[] = { {KE_IGNORE, 0x63, {KEY_BRIGHTNESSDOWN} }, {KE_KEY, 0x64, {KEY_SWITCHVIDEOMODE} }, /* Display Switch */ {KE_IGNORE, 0x81, {KEY_SLEEP} }, - {KE_KEY, 0x82, {KEY_TOUCHPAD_TOGGLE} }, /* Touch Pad On/Off */ + {KE_KEY, 0x82, {KEY_TOUCHPAD_TOGGLE} }, /* Touch Pad Toggle */ + {KE_KEY, KEY_TOUCHPAD_ON, {KEY_TOUCHPAD_ON} }, + {KE_KEY, KEY_TOUCHPAD_OFF, {KEY_TOUCHPAD_OFF} }, {KE_IGNORE, 0x83, {KEY_TOUCHPAD_TOGGLE} }, {KE_END, 0} }; @@ -147,6 +149,7 @@ struct event_return_value { #define ACER_WMID3_GDS_THREEG (1<<6) /* 3G */ #define ACER_WMID3_GDS_WIMAX (1<<7) /* WiMAX */ #define ACER_WMID3_GDS_BLUETOOTH (1<<11) /* BT */ +#define ACER_WMID3_GDS_TOUCHPAD (1<<1) /* Touchpad */ struct lm_input_params { u8 function_num; /* Function Number */ @@ -1678,6 +1681,7 @@ static void acer_wmi_notify(u32 value, void *context) acpi_status status; u16 device_state; const struct key_entry *key; + u32 scancode; status = wmi_get_event_data(value, &response); if (status != AE_OK) { @@ -1714,6 +1718,7 @@ static void acer_wmi_notify(u32 value, void *context) pr_warn("Unknown key number - 0x%x\n", return_value.key_num); } else { + scancode = return_value.key_num; switch (key->keycode) { case KEY_WLAN: case KEY_BLUETOOTH: @@ -1727,9 +1732,11 @@ static void acer_wmi_notify(u32 value, void *context) rfkill_set_sw_state(bluetooth_rfkill, !(device_state & ACER_WMID3_GDS_BLUETOOTH)); break; + case KEY_TOUCHPAD_TOGGLE: + scancode = (device_state & ACER_WMID3_GDS_TOUCHPAD) ? + KEY_TOUCHPAD_ON : KEY_TOUCHPAD_OFF; } - sparse_keymap_report_entry(acer_wmi_input_dev, key, - 1, true); + sparse_keymap_report_event(acer_wmi_input_dev, scancode, 1, true); } break; case WMID_ACCEL_EVENT: From 68825ce20e81e2165ec4654c3296e5e8c1dae765 Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Mon, 26 Nov 2012 21:35:02 +0300 Subject: [PATCH 115/553] acer-wmi: add Aspire 5741G touchpad toggle key Add Aspire 5741G KEY_TOUCHPAD_TOGGLE to wmi keymap, preventing "acer_wmi: Unknown key number - 0x85" error. Signed-off-by: Sergey Senozhatsky Signed-off-by: Matthew Garrett --- drivers/platform/x86/acer-wmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 44f62b24f0a1..afed7018a2b5 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -129,6 +129,7 @@ static const struct key_entry acer_wmi_keymap[] = { {KE_KEY, KEY_TOUCHPAD_ON, {KEY_TOUCHPAD_ON} }, {KE_KEY, KEY_TOUCHPAD_OFF, {KEY_TOUCHPAD_OFF} }, {KE_IGNORE, 0x83, {KEY_TOUCHPAD_TOGGLE} }, + {KE_KEY, 0x85, {KEY_TOUCHPAD_TOGGLE} }, {KE_END, 0} }; From e04c200f1f2de8eaa2f5af6d97e7e213a1abb424 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Wed, 5 Dec 2012 16:08:33 -0600 Subject: [PATCH 116/553] samsung-laptop: Add quirk for broken acpi_video backlight on N250P BugLink: http://bugs.launchpad.net/bugs/1086921 Cc: stable@vger.kernel.org # v3.4+ Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/platform/x86/samsung-laptop.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c index dd90d15f5210..71623a2ff3e8 100644 --- a/drivers/platform/x86/samsung-laptop.c +++ b/drivers/platform/x86/samsung-laptop.c @@ -1523,6 +1523,16 @@ static struct dmi_system_id __initdata samsung_dmi_table[] = { }, .driver_data = &samsung_broken_acpi_video, }, + { + .callback = samsung_dmi_matched, + .ident = "N250P", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "N250P"), + DMI_MATCH(DMI_BOARD_NAME, "N250P"), + }, + .driver_data = &samsung_broken_acpi_video, + }, { }, }; MODULE_DEVICE_TABLE(dmi, samsung_dmi_table); From dcbeec264d73b7228ffdfe767eab69b2353099b1 Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Fri, 21 Dec 2012 07:21:09 +0900 Subject: [PATCH 117/553] sony-laptop: fix SNC buffer calls when SN06 returns Integers SN06 in some cases returns an Integer instead of a buffer. While the code handling the return value was trying to cope with the difference, the memcpy call was not making any difference between the two types of acpi_object union. This regression was introduced in 3.5. While there also rework the return value logic to improve readability. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=48671 Cc: Cc: Fabrizio Narni Cc: Signed-off-by: Mattia Dongili Signed-off-by: Matthew Garrett --- drivers/platform/x86/sony-laptop.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index daaddec68def..b8ad71f7863f 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -786,28 +786,29 @@ static int sony_nc_int_call(acpi_handle handle, char *name, int *value, static int sony_nc_buffer_call(acpi_handle handle, char *name, u64 *value, void *buffer, size_t buflen) { + int ret = 0; size_t len = len; union acpi_object *object = __call_snc_method(handle, name, value); if (!object) return -EINVAL; - if (object->type == ACPI_TYPE_BUFFER) + if (object->type == ACPI_TYPE_BUFFER) { len = MIN(buflen, object->buffer.length); + memcpy(buffer, object->buffer.pointer, len); - else if (object->type == ACPI_TYPE_INTEGER) + } else if (object->type == ACPI_TYPE_INTEGER) { len = MIN(buflen, sizeof(object->integer.value)); + memcpy(buffer, &object->integer.value, len); - else { + } else { pr_warn("Invalid acpi_object: expected 0x%x got 0x%x\n", ACPI_TYPE_BUFFER, object->type); - kfree(object); - return -EINVAL; + ret = -EINVAL; } - memcpy(buffer, object->buffer.pointer, len); kfree(object); - return 0; + return ret; } struct sony_nc_handles { From db210312f77b8e0e3652bbbaafe879c24c8ba604 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 13 Dec 2012 19:57:55 -0500 Subject: [PATCH 118/553] staging: Make SystemBase PCI Multiport UART only for x86 The sb105x SystemBase PCI UART driver in staging has code specific for x86. This breaks allyesconfig builds for other archs. For now, the quick fix is simply to make this driver depend on x86. When I get time, I'll swap this card out of my main machine and put it into my PowerPC64 box, and get it working there. Then it may become a good samaritan and play nice with other archs. Reported-by: Stephen Rothwell Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman --- drivers/staging/sb105x/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/sb105x/Kconfig b/drivers/staging/sb105x/Kconfig index ac87c5e38dee..1facad625554 100644 --- a/drivers/staging/sb105x/Kconfig +++ b/drivers/staging/sb105x/Kconfig @@ -2,6 +2,7 @@ config SB105X tristate "SystemBase PCI Multiport UART" select SERIAL_CORE depends on PCI + depends on X86 help A driver for the SystemBase Multi-2/PCI serial card From b1255fb989e1d11295cd7e530848b6a05baa9331 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 14 Dec 2012 11:45:42 -0500 Subject: [PATCH 119/553] staging: Enable parport sb105x drivers if parport is configured Some of the drivers that the sb105x SystemBase handles are for parallel port cards. If PARPORT isn't configured, the build fails. Only initialize the parallel port cards if PARPORT is configured in. Reported-by: Wu Fengguang Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman --- drivers/staging/sb105x/sb_pci_mp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/sb105x/sb_pci_mp.c b/drivers/staging/sb105x/sb_pci_mp.c index edb2a85b9d52..131afd0c460c 100644 --- a/drivers/staging/sb105x/sb_pci_mp.c +++ b/drivers/staging/sb105x/sb_pci_mp.c @@ -3054,6 +3054,7 @@ static int init_mp_dev(struct pci_dev *pcidev, mppcibrd_t brd) sbdev->nr_ports = ((portnum_hex/16)*10) + (portnum_hex % 16); } break; +#ifdef CONFIG_PARPORT case PCI_DEVICE_ID_MP2S1P : sbdev->nr_ports = 2; @@ -3073,6 +3074,7 @@ static int init_mp_dev(struct pci_dev *pcidev, mppcibrd_t brd) /* add PC compatible parallel port */ parport_pc_probe_port(pcidev->resource[2].start, pcidev->resource[3].start, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &pcidev->dev, 0); break; +#endif } ret = request_region(sbdev->uart_access_addr, (8*sbdev->nr_ports), sbdev->name); From cb7da022450cdaaebd33078b6b32fb7dd2aaf6db Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 29 Nov 2012 09:12:37 +0100 Subject: [PATCH 120/553] asus-laptop: Do not call HWRS on init Since commit 8871e99f89b7 ('asus-laptop: HRWS/HWRS typo'), module initialisation is very slow on the Asus UL30A. The HWRS method takes about 12 seconds to run, and subsequent initialisation also seems to be delayed. Since we don't really need the result, don't bother calling it on init. Those who are curious can still get the result through the 'infos' device attribute. Update the comment about HWRS in show_infos(). Reported-by: ryan References: http://bugs.debian.org/692436 Signed-off-by: Ben Hutchings Signed-off-by: Corentin Chary Signed-off-by: Matthew Garrett --- drivers/platform/x86/asus-laptop.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-) diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index ec1d3bc2dbe2..d0c519762dcf 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -860,8 +860,10 @@ static ssize_t show_infos(struct device *dev, /* * The HWRS method return informations about the hardware. * 0x80 bit is for WLAN, 0x100 for Bluetooth. + * 0x40 for WWAN, 0x10 for WIMAX. * The significance of others is yet to be found. - * If we don't find the method, we assume the device are present. + * We don't currently use this for device detection, and it + * takes several seconds to run on some systems. */ rv = acpi_evaluate_integer(asus->handle, "HWRS", NULL, &temp); if (!ACPI_FAILURE(rv)) @@ -1682,7 +1684,7 @@ static int asus_laptop_get_info(struct asus_laptop *asus) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *model = NULL; - unsigned long long bsts_result, hwrs_result; + unsigned long long bsts_result; char *string = NULL; acpi_status status; @@ -1744,17 +1746,6 @@ static int asus_laptop_get_info(struct asus_laptop *asus) if (*string) pr_notice(" %s model detected\n", string); - /* - * The HWRS method return informations about the hardware. - * 0x80 bit is for WLAN, 0x100 for Bluetooth, - * 0x40 for WWAN, 0x10 for WIMAX. - * The significance of others is yet to be found. - */ - status = - acpi_evaluate_integer(asus->handle, "HWRS", NULL, &hwrs_result); - if (!ACPI_FAILURE(status)) - pr_notice(" HWRS returned %x", (int)hwrs_result); - if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL)) asus->have_rsts = true; From f7cb13b3f27f70caacf1a0a0b4f1f9b86420ee03 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 26 Dec 2012 12:22:25 -0500 Subject: [PATCH 121/553] Update MAINTAINERS entry New job, new address. Signed-off-by: Matthew Garrett --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3a21fe7213b9..3ab0949599cd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8526,7 +8526,7 @@ F: Documentation/x86/ F: arch/x86/ X86 PLATFORM DRIVERS -M: Matthew Garrett +M: Matthew Garrett L: platform-driver-x86@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git S: Maintained From 9f89748463f13c9657496b12820f09a988ce77ff Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Fri, 28 Dec 2012 10:54:42 -0500 Subject: [PATCH 122/553] asus-laptop: Fix potential invalid pointer dereference The 0-day build testing backend noticed that a string could be dereferenced without validation. Fix that. Signed-off-by: Matthew Garrett --- drivers/platform/x86/asus-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index d0c519762dcf..fcde4e528819 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -1743,7 +1743,7 @@ static int asus_laptop_get_info(struct asus_laptop *asus) return -ENOMEM; } - if (*string) + if (string) pr_notice(" %s model detected\n", string); if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL)) From 5f3b361a12e121f52fae586798a775606a3bab6b Mon Sep 17 00:00:00 2001 From: Emil Goode Date: Sat, 29 Dec 2012 16:27:17 +0100 Subject: [PATCH 123/553] Staging: wlan-ng: Add missing argument MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit c8442118 introduced a struct wireless_dev pointer as a second argument of the function pointers set_tx_power and get_tx_power. This patch adds the missing arguments for the wlan-ng driver. Sparse warnings: drivers/staging/wlan-ng/cfg80211.c:735:25: warning: incorrect type in initializer (incompatible argument 2 (different base types)) drivers/staging/wlan-ng/cfg80211.c:735:25: expected int ( *set_tx_power )( ... ) drivers/staging/wlan-ng/cfg80211.c:735:25: got int ( extern [toplevel] * )( ... ) drivers/staging/wlan-ng/cfg80211.c:736:25: warning: incorrect type in initializer (incompatible argument 2 (different base types)) drivers/staging/wlan-ng/cfg80211.c:736:25: expected int ( *get_tx_power )( ... ) drivers/staging/wlan-ng/cfg80211.c:736:25: got int ( extern [toplevel] * )( ... ) drivers/staging/wlan-ng/cfg80211.c:735:2: warning: initialization from incompatible pointer type [enabled by default] drivers/staging/wlan-ng/cfg80211.c:735:2: warning: (near initialization for ‘prism2_usb_cfg_ops.set_tx_power’) [enabled by default] drivers/staging/wlan-ng/cfg80211.c:736:2: warning: initialization from incompatible pointer type [enabled by default] drivers/staging/wlan-ng/cfg80211.c:736:2: warning: (near initialization for ‘prism2_usb_cfg_ops.get_tx_power’) [enabled by default] Signed-off-by: Emil Goode Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wlan-ng/cfg80211.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c index 18c06a59c091..1d31eab19d16 100644 --- a/drivers/staging/wlan-ng/cfg80211.c +++ b/drivers/staging/wlan-ng/cfg80211.c @@ -638,8 +638,8 @@ int prism2_leave_ibss(struct wiphy *wiphy, struct net_device *dev) } -int prism2_set_tx_power(struct wiphy *wiphy, enum nl80211_tx_power_setting type, - int mbm) +int prism2_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev, + enum nl80211_tx_power_setting type, int mbm) { struct prism2_wiphy_private *priv = wiphy_priv(wiphy); wlandevice_t *wlandev = priv->wlandev; @@ -665,7 +665,8 @@ exit: return err; } -int prism2_get_tx_power(struct wiphy *wiphy, int *dbm) +int prism2_get_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev, + int *dbm) { struct prism2_wiphy_private *priv = wiphy_priv(wiphy); wlandevice_t *wlandev = priv->wlandev; From da849a92d3bafaf24d770e971c2c9e5c3f60b5d1 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 29 Dec 2012 11:36:53 -0600 Subject: [PATCH 124/553] staging: r8712u: Add new device ID The ISY IWL 1000 USB WLAN stick with USB ID 050d:11f1 is a clone of the Belkin F7D1101 V1 device. Reported-by: Thomas Hartmann Signed-off-by: Larry Finger Cc: Thomas Hartmann Cc: Stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8712/usb_intf.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c index 6b73843e580a..a96cd06d69dd 100644 --- a/drivers/staging/rtl8712/usb_intf.c +++ b/drivers/staging/rtl8712/usb_intf.c @@ -63,6 +63,8 @@ static struct usb_device_id rtl871x_usb_id_tbl[] = { {USB_DEVICE(0x0B05, 0x1791)}, /* 11n mode disable */ /* Belkin */ {USB_DEVICE(0x050D, 0x945A)}, + /* ISY IWL - Belkin clone */ + {USB_DEVICE(0x050D, 0x11F1)}, /* Corega */ {USB_DEVICE(0x07AA, 0x0047)}, /* D-Link */ From e6028db0146cf5a68dbd1508225ea49840997880 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 22 Dec 2012 01:44:16 +0400 Subject: [PATCH 125/553] mei: fix mismatch in mutex unlock-lock in mei_amthif_read() Users of mei_amthif_read() expect it leaves dev->device_lock held, while there is a path where mei_amthif_read() unlocks device_lock and returns -ERESTARTSYS. The patch move code locking device_lock back before the return. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Cc: Sedat Dilek Acked-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/amthif.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/misc/mei/amthif.c b/drivers/misc/mei/amthif.c index 18794aea6062..e40ffd9502d1 100644 --- a/drivers/misc/mei/amthif.c +++ b/drivers/misc/mei/amthif.c @@ -187,13 +187,13 @@ int mei_amthif_read(struct mei_device *dev, struct file *file, wait_ret = wait_event_interruptible(dev->iamthif_cl.wait, (cb = mei_amthif_find_read_list_entry(dev, file))); + /* Locking again the Mutex */ + mutex_lock(&dev->device_lock); + if (wait_ret) return -ERESTARTSYS; dev_dbg(&dev->pdev->dev, "woke up from sleep\n"); - - /* Locking again the Mutex */ - mutex_lock(&dev->device_lock); } From 2cb5000057fbd2237c19b8b8bd4f6948fd11f5f8 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 2 Jan 2013 13:58:18 -0500 Subject: [PATCH 126/553] USB: usbtest: fix test number in log message This patch (as1639) fixes a minor bug in the usbtest driver. Due to concurrent changes, a test originally written as number 17 got changed to number 24, but the corresponding change was not made in the log message. This updates the log message. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 7667b12f2ff5..268148de9714 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -2179,7 +2179,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) if (dev->out_pipe == 0 || !param->length || param->sglen < 4) break; retval = 0; - dev_info(&intf->dev, "TEST 17: unlink from %d queues of " + dev_info(&intf->dev, "TEST 24: unlink from %d queues of " "%d %d-byte writes\n", param->iterations, param->sglen, param->length); for (i = param->iterations; retval == 0 && i > 0; --i) { From 75e1a2ae1f61ce1ae640410ba757bba84bd9fefe Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 19 Dec 2012 16:15:56 +0000 Subject: [PATCH 127/553] USB: ehci: make debug port in-use detection functional again Debug port in-use determination must be done before the controller gets reset the first time, i.e. before the call to ehci_setup() as of commit 1a49e2ac9651df7349867a5cf44e2c83de1046af. That commit effectively rendered commit 9fa5780beea1274d498a224822397100022da7d4 useless. While moving that code around, also fix the BAR determination - the respective capability field is a 3- rather than a 2-bit one -, and use PCI_CAP_ID_DBG instead of the literal 0x0a. It's unclear to me whether the debug port functionality is important enough to warrant fixing this in stable kernels too. Signed-off-by: Jan Beulich Cc: Konrad Rzeszutek Wilk Cc: stable Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-pci.c | 39 +++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 19 deletions(-) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index dabb20494826..170b9399e09f 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -200,6 +200,26 @@ static int ehci_pci_setup(struct usb_hcd *hcd) break; } + /* optional debug port, normally in the first BAR */ + temp = pci_find_capability(pdev, PCI_CAP_ID_DBG); + if (temp) { + pci_read_config_dword(pdev, temp, &temp); + temp >>= 16; + if (((temp >> 13) & 7) == 1) { + u32 hcs_params = ehci_readl(ehci, + &ehci->caps->hcs_params); + + temp &= 0x1fff; + ehci->debug = hcd->regs + temp; + temp = ehci_readl(ehci, &ehci->debug->control); + ehci_info(ehci, "debug port %d%s\n", + HCS_DEBUG_PORT(hcs_params), + (temp & DBGP_ENABLED) ? " IN USE" : ""); + if (!(temp & DBGP_ENABLED)) + ehci->debug = NULL; + } + } + retval = ehci_setup(hcd); if (retval) return retval; @@ -228,25 +248,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) break; } - /* optional debug port, normally in the first BAR */ - temp = pci_find_capability(pdev, 0x0a); - if (temp) { - pci_read_config_dword(pdev, temp, &temp); - temp >>= 16; - if ((temp & (3 << 13)) == (1 << 13)) { - temp &= 0x1fff; - ehci->debug = hcd->regs + temp; - temp = ehci_readl(ehci, &ehci->debug->control); - ehci_info(ehci, "debug port %d%s\n", - HCS_DEBUG_PORT(ehci->hcs_params), - (temp & DBGP_ENABLED) - ? " IN USE" - : ""); - if (!(temp & DBGP_ENABLED)) - ehci->debug = NULL; - } - } - /* at least the Genesys GL880S needs fixup here */ temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params); temp &= 0x0f; From a76fefab5c82d0f51c1330e275476b2066fe7d73 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 7 Jan 2013 19:03:17 +0000 Subject: [PATCH 128/553] ASoC: wm_adsp: Ensure that block writes are from DMA aligned addresses Otherwise we won't run correctly on systems that require this for larger data transfers. Signed-off-by: Mark Brown --- sound/soc/codecs/wm_adsp.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index ffc89fab96fb..7b198c38f3ef 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -169,6 +169,7 @@ static int wm_adsp_load(struct wm_adsp *dsp) const struct wm_adsp_region *mem; const char *region_name; char *file, *text; + void *buf; unsigned int reg; int regions = 0; int ret, offset, type, sizes; @@ -322,8 +323,18 @@ static int wm_adsp_load(struct wm_adsp *dsp) } if (reg) { - ret = regmap_raw_write(regmap, reg, region->data, + buf = kmemdup(region->data, le32_to_cpu(region->len), + GFP_KERNEL); + if (!buf) { + adsp_err(dsp, "Out of memory\n"); + return -ENOMEM; + } + + ret = regmap_raw_write(regmap, reg, buf, le32_to_cpu(region->len)); + + kfree(buf); + if (ret != 0) { adsp_err(dsp, "%s.%d: Failed to write %d bytes at %d in %s: %d\n", @@ -359,6 +370,7 @@ static int wm_adsp_load_coeff(struct wm_adsp *dsp) const char *region_name; int ret, pos, blocks, type, offset, reg; char *file; + void *buf; file = kzalloc(PAGE_SIZE, GFP_KERNEL); if (file == NULL) @@ -426,6 +438,13 @@ static int wm_adsp_load_coeff(struct wm_adsp *dsp) } if (reg) { + buf = kmemdup(blk->data, le32_to_cpu(blk->len), + GFP_KERNEL); + if (!buf) { + adsp_err(dsp, "Out of memory\n"); + return -ENOMEM; + } + ret = regmap_raw_write(regmap, reg, blk->data, le32_to_cpu(blk->len)); if (ret != 0) { @@ -433,6 +452,8 @@ static int wm_adsp_load_coeff(struct wm_adsp *dsp) "%s.%d: Failed to write to %x in %s\n", file, blocks, reg, region_name); } + + kfree(buf); } pos += le32_to_cpu(blk->len) + sizeof(*blk); From 9929362348096bd9396c523338127fc9b7487c42 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 28 Nov 2012 14:51:22 -0500 Subject: [PATCH 129/553] staging/fwserial: Refine Kconfig help text Users should be informed upfront that this is a Linux-only affair currently. Signed-off-by: Peter Hurley Acked-by: Stefan Richter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/fwserial/Kconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/fwserial/Kconfig b/drivers/staging/fwserial/Kconfig index 580406cb1808..b2f8331e4acf 100644 --- a/drivers/staging/fwserial/Kconfig +++ b/drivers/staging/fwserial/Kconfig @@ -3,7 +3,9 @@ config FIREWIRE_SERIAL depends on FIREWIRE help This enables TTY over IEEE 1394, providing high-speed serial - connectivity to cabled peers. + connectivity to cabled peers. This driver implements a + ad-hoc transport protocol and is currently limited to + Linux-to-Linux communication. To compile this driver as a module, say M here: the module will be called firewire-serial. From 0555cb987ae76b53dc19e33c308e747b43622741 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 28 Nov 2012 14:51:23 -0500 Subject: [PATCH 130/553] staging/fwserial: Limit tx/rx to 1394-2008 spec maximum Per this conversation https://lkml.org/lkml/2012/11/27/587 limit the maximum transmission to the IEEE 1394-2008 specification maximum size of 4096 bytes for asynchronous packets. Signed-off-by: Peter Hurley Acked-by: Stefan Richter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/fwserial/TODO | 3 --- drivers/staging/fwserial/fwserial.c | 2 +- drivers/staging/fwserial/fwserial.h | 6 +++--- 3 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/staging/fwserial/TODO b/drivers/staging/fwserial/TODO index 726900548eae..ffe47d1d8c1c 100644 --- a/drivers/staging/fwserial/TODO +++ b/drivers/staging/fwserial/TODO @@ -12,9 +12,6 @@ TODOs 1. This driver uses the same unregistered vendor id that the firewire core does (0xd00d1e). Perhaps this could be exposed as a define in firewire-constants.h? -2. MAX_ASYNC_PAYLOAD needs to be publicly exposed by core/ohci - - otherwise how will this driver know the max size of address window to - open for one packet write? 3. Maybe device_max_receive() and link_speed_to_max_payload() should be taken up by the firewire core? 4. To avoid dropping rx data while still limiting the maximum buffering, diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c index 61ee29083b26..d03a7f57e8d4 100644 --- a/drivers/staging/fwserial/fwserial.c +++ b/drivers/staging/fwserial/fwserial.c @@ -179,7 +179,7 @@ static void dump_profile(struct seq_file *m, struct stats *stats) /* Returns the max receive packet size for the given card */ static inline int device_max_receive(struct fw_device *fw_device) { - return 1 << (clamp_t(int, fw_device->max_rec, 8U, 13U) + 1); + return 1 << (clamp_t(int, fw_device->max_rec, 8U, 11U) + 1); } static void fwtty_log_tx_error(struct fwtty_port *port, int rcode) diff --git a/drivers/staging/fwserial/fwserial.h b/drivers/staging/fwserial/fwserial.h index 8b572edf9563..caa1c1ea82d5 100644 --- a/drivers/staging/fwserial/fwserial.h +++ b/drivers/staging/fwserial/fwserial.h @@ -374,10 +374,10 @@ static inline void fwtty_bind_console(struct fwtty_port *port, */ static inline int link_speed_to_max_payload(unsigned speed) { - static const int max_async[] = { 307, 614, 1229, 2458, 4916, 9832, }; - BUILD_BUG_ON(ARRAY_SIZE(max_async) - 1 != SCODE_3200); + static const int max_async[] = { 307, 614, 1229, 2458, }; + BUILD_BUG_ON(ARRAY_SIZE(max_async) - 1 != SCODE_800); - speed = clamp(speed, (unsigned) SCODE_100, (unsigned) SCODE_3200); + speed = clamp(speed, (unsigned) SCODE_100, (unsigned) SCODE_800); if (limit_bw) return max_async[speed]; else From 3c8c21e63a44de815e924b1605ee8351c5703d0b Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 28 Nov 2012 14:51:24 -0500 Subject: [PATCH 131/553] staging/fwserial: Update TODO file per reviewer comments Pursuant to this review https://lkml.org/lkml/2012/11/12/500 by Stefan Richter, update the TODO file. - Clarify purpose of TODO file - Remove firewire item #4. As discussed in this conversation https://lkml.org/lkml/2012/11/13/564 knowing the AR buffer size is not a hard requirement. The required rx buffer size can be determined experimentally. - Remove firewire item #5. This was a private note for further experimentation. - Change firewire item #1. Change suggested header from uapi header to kernel-only header. Signed-off-by: Peter Hurley Acked-by: Stefan Richter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/fwserial/TODO | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/staging/fwserial/TODO b/drivers/staging/fwserial/TODO index ffe47d1d8c1c..8dae8fb25223 100644 --- a/drivers/staging/fwserial/TODO +++ b/drivers/staging/fwserial/TODO @@ -1,5 +1,5 @@ -TODOs ------ +TODOs prior to this driver moving out of staging +------------------------------------------------ 1. Implement retries for RCODE_BUSY, RCODE_NO_ACK and RCODE_SEND_ERROR - I/O is handled asynchronously which presents some issues when error conditions occur. @@ -11,14 +11,9 @@ TODOs -- Issues with firewire stack -- 1. This driver uses the same unregistered vendor id that the firewire core does (0xd00d1e). Perhaps this could be exposed as a define in - firewire-constants.h? + firewire.h? 3. Maybe device_max_receive() and link_speed_to_max_payload() should be taken up by the firewire core? -4. To avoid dropping rx data while still limiting the maximum buffering, - the size of the AR context must be known. How to expose this to drivers? -5. Explore if bigger AR context will reduce RCODE_BUSY responses - (or auto-grow to certain max size -- but this would require major surgery - as the current AR is contiguously mapped) -- Issues with TTY core -- 1. Hack for alternate device name scheme From 111b72a2f09e1958a6078a8b1c3feded6a3b450e Mon Sep 17 00:00:00 2001 From: Julian Wollrath Date: Wed, 2 Jan 2013 15:21:56 +0100 Subject: [PATCH 132/553] rtlwifi: Fix typo in debug output of rtl8192c and rtl8723ae Signed-off-by: Julian Wollrath Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c | 2 +- drivers/net/wireless/rtlwifi/rtl8723ae/phy.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c index 1d5d3604e3e0..246e5352f2e1 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c +++ b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c @@ -692,7 +692,7 @@ u8 rtl92c_phy_sw_chnl(struct ieee80211_hw *hw) if (!(is_hal_stop(rtlhal)) && !(RT_CANNOT_IO(hw))) { rtl92c_phy_sw_chnl_callback(hw); RT_TRACE(rtlpriv, COMP_CHAN, DBG_LOUD, - "sw_chnl_inprogress false schdule workitem\n"); + "sw_chnl_inprogress false schedule workitem\n"); rtlphy->sw_chnl_inprogress = false; } else { RT_TRACE(rtlpriv, COMP_CHAN, DBG_LOUD, diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c index 39cc7938eedf..3d8536bb0d2b 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c @@ -1106,7 +1106,7 @@ u8 rtl8723ae_phy_sw_chnl(struct ieee80211_hw *hw) if (!(is_hal_stop(rtlhal)) && !(RT_CANNOT_IO(hw))) { rtl8723ae_phy_sw_chnl_callback(hw); RT_TRACE(rtlpriv, COMP_CHAN, DBG_LOUD, - "sw_chnl_inprogress false schdule workitem\n"); + "sw_chnl_inprogress false schedule workitem\n"); rtlphy->sw_chnl_inprogress = false; } else { RT_TRACE(rtlpriv, COMP_CHAN, DBG_LOUD, From c4f74d35cac7cbc44877313b69550e2f5aeae77d Mon Sep 17 00:00:00 2001 From: Nickolai Zeldovich Date: Sun, 6 Jan 2013 20:27:22 -0500 Subject: [PATCH 133/553] drivers/net/wireless/mwl8k.c: avoid use-after-free Do not dereference p->station_id after kfree(cmd) because p points into the cmd data structure. Signed-off-by: Nickolai Zeldovich Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index f221b95b90b3..83564d36e801 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -4250,9 +4250,11 @@ static int mwl8k_cmd_update_stadb_add(struct ieee80211_hw *hw, p->amsdu_enabled = 0; rc = mwl8k_post_cmd(hw, &cmd->header); + if (!rc) + rc = p->station_id; kfree(cmd); - return rc ? rc : p->station_id; + return rc; } static int mwl8k_cmd_update_stadb_del(struct ieee80211_hw *hw, From 407ee23725bba0f273963bb744fea6cb3cf78bf4 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 7 Jan 2013 12:42:46 +0800 Subject: [PATCH 134/553] drivers/net/wireless/iwlegacy: use strlcpy instead of strncpy The fields must be null-terminated, or simple_strtoul will cause issue. Signed-off-by: Chen Gang Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/3945-mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c index d604b4036a76..3726cd6fcd75 100644 --- a/drivers/net/wireless/iwlegacy/3945-mac.c +++ b/drivers/net/wireless/iwlegacy/3945-mac.c @@ -3273,7 +3273,7 @@ il3945_store_measurement(struct device *d, struct device_attribute *attr, if (count) { char *p = buffer; - strncpy(buffer, buf, min(sizeof(buffer), count)); + strlcpy(buffer, buf, sizeof(buffer)); channel = simple_strtoul(p, NULL, 0); if (channel) params.channel = channel; From 5e20a4b53094651d80f856ff55a916b999dbb57a Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 20 Dec 2012 15:55:01 -0600 Subject: [PATCH 135/553] b43: Fix firmware loading when driver is built into the kernel Recent versions of udev cause synchronous firmware loading from the probe routine to fail because the request to user space would time out. The original fix for b43 (commit 6b6fa58) moved the firmware load from the probe routine to a work queue, but it still used synchronous firmware loading. This method is OK when b43 is built as a module; however, it fails when the driver is compiled into the kernel. This version changes the code to load the initial firmware file using request_firmware_nowait(). A completion event is used to hold the work queue until that file is available. This driver reads several firmware files - the remainder can be read synchronously. On some test systems, the async read fails; however, a following synch read works, thus the async failure falls through to the sync try. Reported-and-Tested by: Felix Janda Signed-off-by: Larry Finger Cc: Stable (V3.4+) Signed-off-by: John W. Linville --- drivers/net/wireless/b43/b43.h | 5 +++ drivers/net/wireless/b43/main.c | 54 +++++++++++++++++++++++++-------- drivers/net/wireless/b43/main.h | 5 ++- 3 files changed, 48 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index b298e5d68be2..10e288d470e7 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -7,6 +7,7 @@ #include #include #include +#include #include #include "debugfs.h" @@ -722,6 +723,10 @@ enum b43_firmware_file_type { struct b43_request_fw_context { /* The device we are requesting the fw for. */ struct b43_wldev *dev; + /* a completion event structure needed if this call is asynchronous */ + struct completion fw_load_complete; + /* a pointer to the firmware object */ + const struct firmware *blob; /* The type of firmware to request. */ enum b43_firmware_file_type req_type; /* Error messages for each firmware type. */ diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 16ab280359bd..806e34c19281 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2088,11 +2088,18 @@ static void b43_print_fw_helptext(struct b43_wl *wl, bool error) b43warn(wl, text); } +static void b43_fw_cb(const struct firmware *firmware, void *context) +{ + struct b43_request_fw_context *ctx = context; + + ctx->blob = firmware; + complete(&ctx->fw_load_complete); +} + int b43_do_request_fw(struct b43_request_fw_context *ctx, const char *name, - struct b43_firmware_file *fw) + struct b43_firmware_file *fw, bool async) { - const struct firmware *blob; struct b43_fw_header *hdr; u32 size; int err; @@ -2131,11 +2138,31 @@ int b43_do_request_fw(struct b43_request_fw_context *ctx, B43_WARN_ON(1); return -ENOSYS; } - err = request_firmware(&blob, ctx->fwname, ctx->dev->dev->dev); + if (async) { + /* do this part asynchronously */ + init_completion(&ctx->fw_load_complete); + err = request_firmware_nowait(THIS_MODULE, 1, ctx->fwname, + ctx->dev->dev->dev, GFP_KERNEL, + ctx, b43_fw_cb); + if (err < 0) { + pr_err("Unable to load firmware\n"); + return err; + } + /* stall here until fw ready */ + wait_for_completion(&ctx->fw_load_complete); + if (ctx->blob) + goto fw_ready; + /* On some ARM systems, the async request will fail, but the next sync + * request works. For this reason, we dall through here + */ + } + err = request_firmware(&ctx->blob, ctx->fwname, + ctx->dev->dev->dev); if (err == -ENOENT) { snprintf(ctx->errors[ctx->req_type], sizeof(ctx->errors[ctx->req_type]), - "Firmware file \"%s\" not found\n", ctx->fwname); + "Firmware file \"%s\" not found\n", + ctx->fwname); return err; } else if (err) { snprintf(ctx->errors[ctx->req_type], @@ -2144,14 +2171,15 @@ int b43_do_request_fw(struct b43_request_fw_context *ctx, ctx->fwname, err); return err; } - if (blob->size < sizeof(struct b43_fw_header)) +fw_ready: + if (ctx->blob->size < sizeof(struct b43_fw_header)) goto err_format; - hdr = (struct b43_fw_header *)(blob->data); + hdr = (struct b43_fw_header *)(ctx->blob->data); switch (hdr->type) { case B43_FW_TYPE_UCODE: case B43_FW_TYPE_PCM: size = be32_to_cpu(hdr->size); - if (size != blob->size - sizeof(struct b43_fw_header)) + if (size != ctx->blob->size - sizeof(struct b43_fw_header)) goto err_format; /* fallthrough */ case B43_FW_TYPE_IV: @@ -2162,7 +2190,7 @@ int b43_do_request_fw(struct b43_request_fw_context *ctx, goto err_format; } - fw->data = blob; + fw->data = ctx->blob; fw->filename = name; fw->type = ctx->req_type; @@ -2172,7 +2200,7 @@ err_format: snprintf(ctx->errors[ctx->req_type], sizeof(ctx->errors[ctx->req_type]), "Firmware file \"%s\" format error.\n", ctx->fwname); - release_firmware(blob); + release_firmware(ctx->blob); return -EPROTO; } @@ -2223,7 +2251,7 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx) goto err_no_ucode; } } - err = b43_do_request_fw(ctx, filename, &fw->ucode); + err = b43_do_request_fw(ctx, filename, &fw->ucode, true); if (err) goto err_load; @@ -2235,7 +2263,7 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx) else goto err_no_pcm; fw->pcm_request_failed = false; - err = b43_do_request_fw(ctx, filename, &fw->pcm); + err = b43_do_request_fw(ctx, filename, &fw->pcm, false); if (err == -ENOENT) { /* We did not find a PCM file? Not fatal, but * core rev <= 10 must do without hwcrypto then. */ @@ -2296,7 +2324,7 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx) default: goto err_no_initvals; } - err = b43_do_request_fw(ctx, filename, &fw->initvals); + err = b43_do_request_fw(ctx, filename, &fw->initvals, false); if (err) goto err_load; @@ -2355,7 +2383,7 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx) default: goto err_no_initvals; } - err = b43_do_request_fw(ctx, filename, &fw->initvals_band); + err = b43_do_request_fw(ctx, filename, &fw->initvals_band, false); if (err) goto err_load; diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h index 8c684cd33529..abac25ee958d 100644 --- a/drivers/net/wireless/b43/main.h +++ b/drivers/net/wireless/b43/main.h @@ -137,9 +137,8 @@ void b43_mac_phy_clock_set(struct b43_wldev *dev, bool on); struct b43_request_fw_context; -int b43_do_request_fw(struct b43_request_fw_context *ctx, - const char *name, - struct b43_firmware_file *fw); +int b43_do_request_fw(struct b43_request_fw_context *ctx, const char *name, + struct b43_firmware_file *fw, bool async); void b43_do_release_fw(struct b43_firmware_file *fw); #endif /* B43_MAIN_H_ */ From f5f9454c2145fa018c9808597739abce67114ac7 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 4 Dec 2012 13:59:12 -0600 Subject: [PATCH 136/553] staging: drm/omap: use omapdss low level API This patch changes the omapdrm KMS to bypass the omapdss "compat" layer and use the core omapdss API directly. This solves some layering issues that would cause unpin confusion vs GO bit status, because we would not know whether a particular pageflip or overlay update has hit the screen or not. Now instead we explicitly manage the GO bits in dispc and handle the vblank/framedone interrupts ourself so that we always know which buffers are being scanned out at any given time, and so on. As an added bonus, we no longer leave the last overlay buffer pinned when the display is disabled, and have been able to add the previously missing vblank event handling. v1: original v2: rebased on latest staging-next and omapdss patches from Tomi and review comments from Archit Taneja Signed-off-by: Rob Clark Reviewed-by: Archit Taneja Reviewed-by: Sumit Semwal Signed-off-by: Greg Kroah-Hartman --- drivers/staging/omapdrm/Makefile | 1 + drivers/staging/omapdrm/TODO | 3 - drivers/staging/omapdrm/omap_connector.c | 111 +---- drivers/staging/omapdrm/omap_crtc.c | 509 ++++++++++++++++++++--- drivers/staging/omapdrm/omap_drv.c | 467 ++++----------------- drivers/staging/omapdrm/omap_drv.h | 140 ++++++- drivers/staging/omapdrm/omap_encoder.c | 132 +++--- drivers/staging/omapdrm/omap_irq.c | 322 ++++++++++++++ drivers/staging/omapdrm/omap_plane.c | 452 ++++++++------------ 9 files changed, 1229 insertions(+), 908 deletions(-) create mode 100644 drivers/staging/omapdrm/omap_irq.c diff --git a/drivers/staging/omapdrm/Makefile b/drivers/staging/omapdrm/Makefile index 1ca0e0016de4..d85e058f2845 100644 --- a/drivers/staging/omapdrm/Makefile +++ b/drivers/staging/omapdrm/Makefile @@ -5,6 +5,7 @@ ccflags-y := -Iinclude/drm -Werror omapdrm-y := omap_drv.o \ + omap_irq.o \ omap_debugfs.o \ omap_crtc.o \ omap_plane.o \ diff --git a/drivers/staging/omapdrm/TODO b/drivers/staging/omapdrm/TODO index 938c7888ca31..abeeb00aaa12 100644 --- a/drivers/staging/omapdrm/TODO +++ b/drivers/staging/omapdrm/TODO @@ -17,9 +17,6 @@ TODO . Revisit GEM sync object infrastructure.. TTM has some framework for this already. Possibly this could be refactored out and made more common? There should be some way to do this with less wheel-reinvention. -. Review DSS vs KMS mismatches. The omap_dss_device is sort of part encoder, - part connector. Which results in a bit of duct tape to fwd calls from - encoder to connector. Possibly this could be done a bit better. . Solve PM sequencing on resume. DMM/TILER must be reloaded before any access is made from any component in the system. Which means on suspend CRTC's should be disabled, and on resume the LUT should be reprogrammed diff --git a/drivers/staging/omapdrm/omap_connector.c b/drivers/staging/omapdrm/omap_connector.c index 91edb3f96972..4cc9ee733c5f 100644 --- a/drivers/staging/omapdrm/omap_connector.c +++ b/drivers/staging/omapdrm/omap_connector.c @@ -31,9 +31,10 @@ struct omap_connector { struct drm_connector base; struct omap_dss_device *dssdev; + struct drm_encoder *encoder; }; -static inline void copy_timings_omap_to_drm(struct drm_display_mode *mode, +void copy_timings_omap_to_drm(struct drm_display_mode *mode, struct omap_video_timings *timings) { mode->clock = timings->pixel_clock; @@ -64,7 +65,7 @@ static inline void copy_timings_omap_to_drm(struct drm_display_mode *mode, mode->flags |= DRM_MODE_FLAG_NVSYNC; } -static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings, +void copy_timings_drm_to_omap(struct omap_video_timings *timings, struct drm_display_mode *mode) { timings->pixel_clock = mode->clock; @@ -96,48 +97,7 @@ static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings, timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES; } -static void omap_connector_dpms(struct drm_connector *connector, int mode) -{ - struct omap_connector *omap_connector = to_omap_connector(connector); - struct omap_dss_device *dssdev = omap_connector->dssdev; - int old_dpms; - - DBG("%s: %d", dssdev->name, mode); - - old_dpms = connector->dpms; - - /* from off to on, do from crtc to connector */ - if (mode < old_dpms) - drm_helper_connector_dpms(connector, mode); - - if (mode == DRM_MODE_DPMS_ON) { - /* store resume info for suspended displays */ - switch (dssdev->state) { - case OMAP_DSS_DISPLAY_SUSPENDED: - dssdev->activate_after_resume = true; - break; - case OMAP_DSS_DISPLAY_DISABLED: { - int ret = dssdev->driver->enable(dssdev); - if (ret) { - DBG("%s: failed to enable: %d", - dssdev->name, ret); - dssdev->driver->disable(dssdev); - } - break; - } - default: - break; - } - } else { - /* TODO */ - } - - /* from on to off, do from connector to crtc */ - if (mode > old_dpms) - drm_helper_connector_dpms(connector, mode); -} - -enum drm_connector_status omap_connector_detect( +static enum drm_connector_status omap_connector_detect( struct drm_connector *connector, bool force) { struct omap_connector *omap_connector = to_omap_connector(connector); @@ -164,8 +124,6 @@ static void omap_connector_destroy(struct drm_connector *connector) struct omap_connector *omap_connector = to_omap_connector(connector); struct omap_dss_device *dssdev = omap_connector->dssdev; - dssdev->driver->disable(dssdev); - DBG("%s", omap_connector->dssdev->name); drm_sysfs_connector_remove(connector); drm_connector_cleanup(connector); @@ -261,36 +219,12 @@ static int omap_connector_mode_valid(struct drm_connector *connector, struct drm_encoder *omap_connector_attached_encoder( struct drm_connector *connector) { - int i; struct omap_connector *omap_connector = to_omap_connector(connector); - - for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) { - struct drm_mode_object *obj; - - if (connector->encoder_ids[i] == 0) - break; - - obj = drm_mode_object_find(connector->dev, - connector->encoder_ids[i], - DRM_MODE_OBJECT_ENCODER); - - if (obj) { - struct drm_encoder *encoder = obj_to_encoder(obj); - struct omap_overlay_manager *mgr = - omap_encoder_get_manager(encoder); - DBG("%s: found %s", omap_connector->dssdev->name, - mgr->name); - return encoder; - } - } - - DBG("%s: no encoder", omap_connector->dssdev->name); - - return NULL; + return omap_connector->encoder; } static const struct drm_connector_funcs omap_connector_funcs = { - .dpms = omap_connector_dpms, + .dpms = drm_helper_connector_dpms, .detect = omap_connector_detect, .fill_modes = drm_helper_probe_single_connector_modes, .destroy = omap_connector_destroy, @@ -302,34 +236,6 @@ static const struct drm_connector_helper_funcs omap_connector_helper_funcs = { .best_encoder = omap_connector_attached_encoder, }; -/* called from encoder when mode is set, to propagate settings to the dssdev */ -void omap_connector_mode_set(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - struct drm_device *dev = connector->dev; - struct omap_connector *omap_connector = to_omap_connector(connector); - struct omap_dss_device *dssdev = omap_connector->dssdev; - struct omap_dss_driver *dssdrv = dssdev->driver; - struct omap_video_timings timings = {0}; - - copy_timings_drm_to_omap(&timings, mode); - - DBG("%s: set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x", - omap_connector->dssdev->name, - mode->base.id, mode->name, mode->vrefresh, mode->clock, - mode->hdisplay, mode->hsync_start, - mode->hsync_end, mode->htotal, - mode->vdisplay, mode->vsync_start, - mode->vsync_end, mode->vtotal, mode->type, mode->flags); - - if (dssdrv->check_timings(dssdev, &timings)) { - dev_err(dev->dev, "could not set timings\n"); - return; - } - - dssdrv->set_timings(dssdev, &timings); -} - /* flush an area of the framebuffer (in case of manual update display that * is not automatically flushed) */ @@ -344,7 +250,8 @@ void omap_connector_flush(struct drm_connector *connector, /* initialize connector */ struct drm_connector *omap_connector_init(struct drm_device *dev, - int connector_type, struct omap_dss_device *dssdev) + int connector_type, struct omap_dss_device *dssdev, + struct drm_encoder *encoder) { struct drm_connector *connector = NULL; struct omap_connector *omap_connector; @@ -360,6 +267,8 @@ struct drm_connector *omap_connector_init(struct drm_device *dev, } omap_connector->dssdev = dssdev; + omap_connector->encoder = encoder; + connector = &omap_connector->base; drm_connector_init(dev, connector, &omap_connector_funcs, diff --git a/drivers/staging/omapdrm/omap_crtc.c b/drivers/staging/omapdrm/omap_crtc.c index d87bd84257bd..5c6ed6040eff 100644 --- a/drivers/staging/omapdrm/omap_crtc.c +++ b/drivers/staging/omapdrm/omap_crtc.c @@ -28,19 +28,131 @@ struct omap_crtc { struct drm_crtc base; struct drm_plane *plane; + const char *name; - int id; + int pipe; + enum omap_channel channel; + struct omap_overlay_manager_info info; + + /* + * Temporary: eventually this will go away, but it is needed + * for now to keep the output's happy. (They only need + * mgr->id.) Eventually this will be replaced w/ something + * more common-panel-framework-y + */ + struct omap_overlay_manager mgr; + + struct omap_video_timings timings; + bool enabled; + bool full_update; + + struct omap_drm_apply apply; + + struct omap_drm_irq apply_irq; + struct omap_drm_irq error_irq; + + /* list of in-progress apply's: */ + struct list_head pending_applies; + + /* list of queued apply's: */ + struct list_head queued_applies; + + /* for handling queued and in-progress applies: */ + struct work_struct apply_work; /* if there is a pending flip, these will be non-null: */ struct drm_pending_vblank_event *event; struct drm_framebuffer *old_fb; + + /* for handling page flips without caring about what + * the callback is called from. Possibly we should just + * make omap_gem always call the cb from the worker so + * we don't have to care about this.. + * + * XXX maybe fold into apply_work?? + */ + struct work_struct page_flip_work; }; +/* + * Manager-ops, callbacks from output when they need to configure + * the upstream part of the video pipe. + * + * Most of these we can ignore until we add support for command-mode + * panels.. for video-mode the crtc-helpers already do an adequate + * job of sequencing the setup of the video pipe in the proper order + */ + +/* we can probably ignore these until we support command-mode panels: */ +static void omap_crtc_start_update(struct omap_overlay_manager *mgr) +{ +} + +static int omap_crtc_enable(struct omap_overlay_manager *mgr) +{ + return 0; +} + +static void omap_crtc_disable(struct omap_overlay_manager *mgr) +{ +} + +static void omap_crtc_set_timings(struct omap_overlay_manager *mgr, + const struct omap_video_timings *timings) +{ + struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr); + DBG("%s", omap_crtc->name); + omap_crtc->timings = *timings; + omap_crtc->full_update = true; +} + +static void omap_crtc_set_lcd_config(struct omap_overlay_manager *mgr, + const struct dss_lcd_mgr_config *config) +{ + struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr); + DBG("%s", omap_crtc->name); + dispc_mgr_set_lcd_config(omap_crtc->channel, config); +} + +static int omap_crtc_register_framedone_handler( + struct omap_overlay_manager *mgr, + void (*handler)(void *), void *data) +{ + return 0; +} + +static void omap_crtc_unregister_framedone_handler( + struct omap_overlay_manager *mgr, + void (*handler)(void *), void *data) +{ +} + +static const struct dss_mgr_ops mgr_ops = { + .start_update = omap_crtc_start_update, + .enable = omap_crtc_enable, + .disable = omap_crtc_disable, + .set_timings = omap_crtc_set_timings, + .set_lcd_config = omap_crtc_set_lcd_config, + .register_framedone_handler = omap_crtc_register_framedone_handler, + .unregister_framedone_handler = omap_crtc_unregister_framedone_handler, +}; + +/* + * CRTC funcs: + */ + static void omap_crtc_destroy(struct drm_crtc *crtc) { struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + + DBG("%s", omap_crtc->name); + + WARN_ON(omap_crtc->apply_irq.registered); + omap_irq_unregister(crtc->dev, &omap_crtc->error_irq); + omap_crtc->plane->funcs->destroy(omap_crtc->plane); drm_crtc_cleanup(crtc); + kfree(omap_crtc); } @@ -48,14 +160,25 @@ static void omap_crtc_dpms(struct drm_crtc *crtc, int mode) { struct omap_drm_private *priv = crtc->dev->dev_private; struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + bool enabled = (mode == DRM_MODE_DPMS_ON); int i; - WARN_ON(omap_plane_dpms(omap_crtc->plane, mode)); + DBG("%s: %d", omap_crtc->name, mode); - for (i = 0; i < priv->num_planes; i++) { - struct drm_plane *plane = priv->planes[i]; - if (plane->crtc == crtc) - WARN_ON(omap_plane_dpms(plane, mode)); + if (enabled != omap_crtc->enabled) { + omap_crtc->enabled = enabled; + omap_crtc->full_update = true; + omap_crtc_apply(crtc, &omap_crtc->apply); + + /* also enable our private plane: */ + WARN_ON(omap_plane_dpms(omap_crtc->plane, mode)); + + /* and any attached overlay planes: */ + for (i = 0; i < priv->num_planes; i++) { + struct drm_plane *plane = priv->planes[i]; + if (plane->crtc == crtc) + WARN_ON(omap_plane_dpms(plane, mode)); + } } } @@ -73,12 +196,26 @@ static int omap_crtc_mode_set(struct drm_crtc *crtc, struct drm_framebuffer *old_fb) { struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - struct drm_plane *plane = omap_crtc->plane; - return omap_plane_mode_set(plane, crtc, crtc->fb, + mode = adjusted_mode; + + DBG("%s: set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x", + omap_crtc->name, mode->base.id, mode->name, + mode->vrefresh, mode->clock, + mode->hdisplay, mode->hsync_start, + mode->hsync_end, mode->htotal, + mode->vdisplay, mode->vsync_start, + mode->vsync_end, mode->vtotal, + mode->type, mode->flags); + + copy_timings_drm_to_omap(&omap_crtc->timings, mode); + omap_crtc->full_update = true; + + return omap_plane_mode_set(omap_crtc->plane, crtc, crtc->fb, 0, 0, mode->hdisplay, mode->vdisplay, x << 16, y << 16, - mode->hdisplay << 16, mode->vdisplay << 16); + mode->hdisplay << 16, mode->vdisplay << 16, + NULL, NULL); } static void omap_crtc_prepare(struct drm_crtc *crtc) @@ -102,10 +239,11 @@ static int omap_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, struct drm_plane *plane = omap_crtc->plane; struct drm_display_mode *mode = &crtc->mode; - return plane->funcs->update_plane(plane, crtc, crtc->fb, + return omap_plane_mode_set(plane, crtc, crtc->fb, 0, 0, mode->hdisplay, mode->vdisplay, x << 16, y << 16, - mode->hdisplay << 16, mode->vdisplay << 16); + mode->hdisplay << 16, mode->vdisplay << 16, + NULL, NULL); } static void omap_crtc_load_lut(struct drm_crtc *crtc) @@ -114,61 +252,52 @@ static void omap_crtc_load_lut(struct drm_crtc *crtc) static void vblank_cb(void *arg) { - static uint32_t sequence; struct drm_crtc *crtc = arg; struct drm_device *dev = crtc->dev; struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - struct drm_pending_vblank_event *event = omap_crtc->event; unsigned long flags; - struct timeval now; - WARN_ON(!event); - - omap_crtc->event = NULL; + spin_lock_irqsave(&dev->event_lock, flags); /* wakeup userspace */ - if (event) { - do_gettimeofday(&now); + if (omap_crtc->event) + drm_send_vblank_event(dev, omap_crtc->pipe, omap_crtc->event); - spin_lock_irqsave(&dev->event_lock, flags); - /* TODO: we can't yet use the vblank time accounting, - * because omapdss lower layer is the one that knows - * the irq # and registers the handler, which more or - * less defeats how drm_irq works.. for now just fake - * the sequence number and use gettimeofday.. - * - event->event.sequence = drm_vblank_count_and_time( - dev, omap_crtc->id, &now); - */ - event->event.sequence = sequence++; - event->event.tv_sec = now.tv_sec; - event->event.tv_usec = now.tv_usec; - list_add_tail(&event->base.link, - &event->base.file_priv->event_list); - wake_up_interruptible(&event->base.file_priv->event_wait); - spin_unlock_irqrestore(&dev->event_lock, flags); - } + omap_crtc->event = NULL; + omap_crtc->old_fb = NULL; + + spin_unlock_irqrestore(&dev->event_lock, flags); +} + +static void page_flip_worker(struct work_struct *work) +{ + struct omap_crtc *omap_crtc = + container_of(work, struct omap_crtc, page_flip_work); + struct drm_crtc *crtc = &omap_crtc->base; + struct drm_device *dev = crtc->dev; + struct drm_display_mode *mode = &crtc->mode; + struct drm_gem_object *bo; + + mutex_lock(&dev->mode_config.mutex); + omap_plane_mode_set(omap_crtc->plane, crtc, crtc->fb, + 0, 0, mode->hdisplay, mode->vdisplay, + crtc->x << 16, crtc->y << 16, + mode->hdisplay << 16, mode->vdisplay << 16, + vblank_cb, crtc); + mutex_unlock(&dev->mode_config.mutex); + + bo = omap_framebuffer_bo(crtc->fb, 0); + drm_gem_object_unreference_unlocked(bo); } static void page_flip_cb(void *arg) { struct drm_crtc *crtc = arg; struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - struct drm_framebuffer *old_fb = omap_crtc->old_fb; - struct drm_gem_object *bo; + struct omap_drm_private *priv = crtc->dev->dev_private; - omap_crtc->old_fb = NULL; - - omap_crtc_mode_set_base(crtc, crtc->x, crtc->y, old_fb); - - /* really we'd like to setup the callback atomically w/ setting the - * new scanout buffer to avoid getting stuck waiting an extra vblank - * cycle.. for now go for correctness and later figure out speed.. - */ - omap_plane_on_endwin(omap_crtc->plane, vblank_cb, crtc); - - bo = omap_framebuffer_bo(crtc->fb, 0); - drm_gem_object_unreference_unlocked(bo); + /* avoid assumptions about what ctxt we are called from: */ + queue_work(priv->wq, &omap_crtc->page_flip_work); } static int omap_crtc_page_flip_locked(struct drm_crtc *crtc, @@ -179,14 +308,14 @@ static int omap_crtc_page_flip_locked(struct drm_crtc *crtc, struct omap_crtc *omap_crtc = to_omap_crtc(crtc); struct drm_gem_object *bo; - DBG("%d -> %d", crtc->fb ? crtc->fb->base.id : -1, fb->base.id); + DBG("%d -> %d (event=%p)", crtc->fb ? crtc->fb->base.id : -1, + fb->base.id, event); - if (omap_crtc->event) { + if (omap_crtc->old_fb) { dev_err(dev->dev, "already a pending flip\n"); return -EINVAL; } - omap_crtc->old_fb = crtc->fb; omap_crtc->event = event; crtc->fb = fb; @@ -234,14 +363,244 @@ static const struct drm_crtc_helper_funcs omap_crtc_helper_funcs = { .load_lut = omap_crtc_load_lut, }; +const struct omap_video_timings *omap_crtc_timings(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + return &omap_crtc->timings; +} + +enum omap_channel omap_crtc_channel(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + return omap_crtc->channel; +} + +static void omap_crtc_error_irq(struct omap_drm_irq *irq, uint32_t irqstatus) +{ + struct omap_crtc *omap_crtc = + container_of(irq, struct omap_crtc, error_irq); + struct drm_crtc *crtc = &omap_crtc->base; + DRM_ERROR("%s: errors: %08x\n", omap_crtc->name, irqstatus); + /* avoid getting in a flood, unregister the irq until next vblank */ + omap_irq_unregister(crtc->dev, &omap_crtc->error_irq); +} + +static void omap_crtc_apply_irq(struct omap_drm_irq *irq, uint32_t irqstatus) +{ + struct omap_crtc *omap_crtc = + container_of(irq, struct omap_crtc, apply_irq); + struct drm_crtc *crtc = &omap_crtc->base; + + if (!omap_crtc->error_irq.registered) + omap_irq_register(crtc->dev, &omap_crtc->error_irq); + + if (!dispc_mgr_go_busy(omap_crtc->channel)) { + struct omap_drm_private *priv = + crtc->dev->dev_private; + DBG("%s: apply done", omap_crtc->name); + omap_irq_unregister(crtc->dev, &omap_crtc->apply_irq); + queue_work(priv->wq, &omap_crtc->apply_work); + } +} + +static void apply_worker(struct work_struct *work) +{ + struct omap_crtc *omap_crtc = + container_of(work, struct omap_crtc, apply_work); + struct drm_crtc *crtc = &omap_crtc->base; + struct drm_device *dev = crtc->dev; + struct omap_drm_apply *apply, *n; + bool need_apply; + + /* + * Synchronize everything on mode_config.mutex, to keep + * the callbacks and list modification all serialized + * with respect to modesetting ioctls from userspace. + */ + mutex_lock(&dev->mode_config.mutex); + dispc_runtime_get(); + + /* + * If we are still pending a previous update, wait.. when the + * pending update completes, we get kicked again. + */ + if (omap_crtc->apply_irq.registered) + goto out; + + /* finish up previous apply's: */ + list_for_each_entry_safe(apply, n, + &omap_crtc->pending_applies, pending_node) { + apply->post_apply(apply); + list_del(&apply->pending_node); + } + + need_apply = !list_empty(&omap_crtc->queued_applies); + + /* then handle the next round of of queued apply's: */ + list_for_each_entry_safe(apply, n, + &omap_crtc->queued_applies, queued_node) { + apply->pre_apply(apply); + list_del(&apply->queued_node); + apply->queued = false; + list_add_tail(&apply->pending_node, + &omap_crtc->pending_applies); + } + + if (need_apply) { + enum omap_channel channel = omap_crtc->channel; + + DBG("%s: GO", omap_crtc->name); + + if (dispc_mgr_is_enabled(channel)) { + omap_irq_register(dev, &omap_crtc->apply_irq); + dispc_mgr_go(channel); + } else { + struct omap_drm_private *priv = dev->dev_private; + queue_work(priv->wq, &omap_crtc->apply_work); + } + } + +out: + dispc_runtime_put(); + mutex_unlock(&dev->mode_config.mutex); +} + +int omap_crtc_apply(struct drm_crtc *crtc, + struct omap_drm_apply *apply) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct drm_device *dev = crtc->dev; + + WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); + + /* no need to queue it again if it is already queued: */ + if (apply->queued) + return 0; + + apply->queued = true; + list_add_tail(&apply->queued_node, &omap_crtc->queued_applies); + + /* + * If there are no currently pending updates, then go ahead and + * kick the worker immediately, otherwise it will run again when + * the current update finishes. + */ + if (list_empty(&omap_crtc->pending_applies)) { + struct omap_drm_private *priv = crtc->dev->dev_private; + queue_work(priv->wq, &omap_crtc->apply_work); + } + + return 0; +} + +/* called only from apply */ +static void set_enabled(struct drm_crtc *crtc, bool enable) +{ + struct drm_device *dev = crtc->dev; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + enum omap_channel channel = omap_crtc->channel; + struct omap_irq_wait *wait = NULL; + + if (dispc_mgr_is_enabled(channel) == enable) + return; + + /* ignore sync-lost irqs during enable/disable */ + omap_irq_unregister(crtc->dev, &omap_crtc->error_irq); + + if (dispc_mgr_get_framedone_irq(channel)) { + if (!enable) { + wait = omap_irq_wait_init(dev, + dispc_mgr_get_framedone_irq(channel), 1); + } + } else { + /* + * When we disable digit output, we need to wait until fields + * are done. Otherwise the DSS is still working, and turning + * off the clocks prevents DSS from going to OFF mode. And when + * enabling, we need to wait for the extra sync losts + */ + wait = omap_irq_wait_init(dev, + dispc_mgr_get_vsync_irq(channel), 2); + } + + dispc_mgr_enable(channel, enable); + + if (wait) { + int ret = omap_irq_wait(dev, wait, msecs_to_jiffies(100)); + if (ret) { + dev_err(dev->dev, "%s: timeout waiting for %s\n", + omap_crtc->name, enable ? "enable" : "disable"); + } + } + + omap_irq_register(crtc->dev, &omap_crtc->error_irq); +} + +static void omap_crtc_pre_apply(struct omap_drm_apply *apply) +{ + struct omap_crtc *omap_crtc = + container_of(apply, struct omap_crtc, apply); + struct drm_crtc *crtc = &omap_crtc->base; + struct drm_encoder *encoder = NULL; + + DBG("%s: enabled=%d, full=%d", omap_crtc->name, + omap_crtc->enabled, omap_crtc->full_update); + + if (omap_crtc->full_update) { + struct omap_drm_private *priv = crtc->dev->dev_private; + int i; + for (i = 0; i < priv->num_encoders; i++) { + if (priv->encoders[i]->crtc == crtc) { + encoder = priv->encoders[i]; + break; + } + } + } + + if (!omap_crtc->enabled) { + set_enabled(&omap_crtc->base, false); + if (encoder) + omap_encoder_set_enabled(encoder, false); + } else { + if (encoder) { + omap_encoder_set_enabled(encoder, false); + omap_encoder_update(encoder, &omap_crtc->mgr, + &omap_crtc->timings); + omap_encoder_set_enabled(encoder, true); + omap_crtc->full_update = false; + } + + dispc_mgr_setup(omap_crtc->channel, &omap_crtc->info); + dispc_mgr_set_timings(omap_crtc->channel, + &omap_crtc->timings); + set_enabled(&omap_crtc->base, true); + } + + omap_crtc->full_update = false; +} + +static void omap_crtc_post_apply(struct omap_drm_apply *apply) +{ + /* nothing needed for post-apply */ +} + +static const char *channel_names[] = { + [OMAP_DSS_CHANNEL_LCD] = "lcd", + [OMAP_DSS_CHANNEL_DIGIT] = "tv", + [OMAP_DSS_CHANNEL_LCD2] = "lcd2", +}; + /* initialize crtc */ struct drm_crtc *omap_crtc_init(struct drm_device *dev, - struct omap_overlay *ovl, int id) + struct drm_plane *plane, enum omap_channel channel, int id) { struct drm_crtc *crtc = NULL; - struct omap_crtc *omap_crtc = kzalloc(sizeof(*omap_crtc), GFP_KERNEL); + struct omap_crtc *omap_crtc; + struct omap_overlay_manager_info *info; - DBG("%s", ovl->name); + DBG("%s", channel_names[channel]); + + omap_crtc = kzalloc(sizeof(*omap_crtc), GFP_KERNEL); if (!omap_crtc) { dev_err(dev->dev, "could not allocate CRTC\n"); @@ -250,10 +609,40 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev, crtc = &omap_crtc->base; - omap_crtc->plane = omap_plane_init(dev, ovl, (1 << id), true); + INIT_WORK(&omap_crtc->page_flip_work, page_flip_worker); + INIT_WORK(&omap_crtc->apply_work, apply_worker); + + INIT_LIST_HEAD(&omap_crtc->pending_applies); + INIT_LIST_HEAD(&omap_crtc->queued_applies); + + omap_crtc->apply.pre_apply = omap_crtc_pre_apply; + omap_crtc->apply.post_apply = omap_crtc_post_apply; + + omap_crtc->apply_irq.irqmask = pipe2vbl(id); + omap_crtc->apply_irq.irq = omap_crtc_apply_irq; + + omap_crtc->error_irq.irqmask = + dispc_mgr_get_sync_lost_irq(channel); + omap_crtc->error_irq.irq = omap_crtc_error_irq; + omap_irq_register(dev, &omap_crtc->error_irq); + + omap_crtc->channel = channel; + omap_crtc->plane = plane; omap_crtc->plane->crtc = crtc; - omap_crtc->name = ovl->name; - omap_crtc->id = id; + omap_crtc->name = channel_names[channel]; + omap_crtc->pipe = id; + + /* temporary: */ + omap_crtc->mgr.id = channel; + + dss_install_mgr_ops(&mgr_ops); + + /* TODO: fix hard-coded setup.. add properties! */ + info = &omap_crtc->info; + info->default_color = 0x00000000; + info->trans_key = 0x00000000; + info->trans_key_type = OMAP_DSS_COLOR_KEY_GFX_DST; + info->trans_enabled = false; drm_crtc_init(dev, crtc, &omap_crtc_funcs); drm_crtc_helper_add(crtc, &omap_crtc_helper_funcs); diff --git a/drivers/staging/omapdrm/omap_drv.c b/drivers/staging/omapdrm/omap_drv.c index 84943e5ba1d6..ae5ecc2efbc7 100644 --- a/drivers/staging/omapdrm/omap_drv.c +++ b/drivers/staging/omapdrm/omap_drv.c @@ -74,319 +74,98 @@ static int get_connector_type(struct omap_dss_device *dssdev) } } -#if 0 /* enable when dss2 supports hotplug */ -static int omap_drm_notifier(struct notifier_block *nb, - unsigned long evt, void *arg) -{ - switch (evt) { - case OMAP_DSS_SIZE_CHANGE: - case OMAP_DSS_HOTPLUG_CONNECT: - case OMAP_DSS_HOTPLUG_DISCONNECT: { - struct drm_device *dev = drm_device; - DBG("hotplug event: evt=%d, dev=%p", evt, dev); - if (dev) - drm_sysfs_hotplug_event(dev); - - return NOTIFY_OK; - } - default: /* don't care about other events for now */ - return NOTIFY_DONE; - } -} -#endif - -static void dump_video_chains(void) -{ - int i; - - DBG("dumping video chains: "); - for (i = 0; i < omap_dss_get_num_overlays(); i++) { - struct omap_overlay *ovl = omap_dss_get_overlay(i); - struct omap_overlay_manager *mgr = ovl->manager; - struct omap_dss_device *dssdev = mgr ? - mgr->get_device(mgr) : NULL; - if (dssdev) { - DBG("%d: %s -> %s -> %s", i, ovl->name, mgr->name, - dssdev->name); - } else if (mgr) { - DBG("%d: %s -> %s", i, ovl->name, mgr->name); - } else { - DBG("%d: %s", i, ovl->name); - } - } -} - -/* create encoders for each manager */ -static int create_encoder(struct drm_device *dev, - struct omap_overlay_manager *mgr) -{ - struct omap_drm_private *priv = dev->dev_private; - struct drm_encoder *encoder = omap_encoder_init(dev, mgr); - - if (!encoder) { - dev_err(dev->dev, "could not create encoder: %s\n", - mgr->name); - return -ENOMEM; - } - - BUG_ON(priv->num_encoders >= ARRAY_SIZE(priv->encoders)); - - priv->encoders[priv->num_encoders++] = encoder; - - return 0; -} - -/* create connectors for each display device */ -static int create_connector(struct drm_device *dev, - struct omap_dss_device *dssdev) -{ - struct omap_drm_private *priv = dev->dev_private; - static struct notifier_block *notifier; - struct drm_connector *connector; - int j; - - if (!dssdev->driver) { - dev_warn(dev->dev, "%s has no driver.. skipping it\n", - dssdev->name); - return 0; - } - - if (!(dssdev->driver->get_timings || - dssdev->driver->read_edid)) { - dev_warn(dev->dev, "%s driver does not support " - "get_timings or read_edid.. skipping it!\n", - dssdev->name); - return 0; - } - - connector = omap_connector_init(dev, - get_connector_type(dssdev), dssdev); - - if (!connector) { - dev_err(dev->dev, "could not create connector: %s\n", - dssdev->name); - return -ENOMEM; - } - - BUG_ON(priv->num_connectors >= ARRAY_SIZE(priv->connectors)); - - priv->connectors[priv->num_connectors++] = connector; - -#if 0 /* enable when dss2 supports hotplug */ - notifier = kzalloc(sizeof(struct notifier_block), GFP_KERNEL); - notifier->notifier_call = omap_drm_notifier; - omap_dss_add_notify(dssdev, notifier); -#else - notifier = NULL; -#endif - - for (j = 0; j < priv->num_encoders; j++) { - struct omap_overlay_manager *mgr = - omap_encoder_get_manager(priv->encoders[j]); - if (mgr->get_device(mgr) == dssdev) { - drm_mode_connector_attach_encoder(connector, - priv->encoders[j]); - } - } - - return 0; -} - -/* create up to max_overlays CRTCs mapping to overlays.. by default, - * connect the overlays to different managers/encoders, giving priority - * to encoders connected to connectors with a detected connection - */ -static int create_crtc(struct drm_device *dev, struct omap_overlay *ovl, - int *j, unsigned int connected_connectors) -{ - struct omap_drm_private *priv = dev->dev_private; - struct omap_overlay_manager *mgr = NULL; - struct drm_crtc *crtc; - - /* find next best connector, ones with detected connection first - */ - while (*j < priv->num_connectors && !mgr) { - if (connected_connectors & (1 << *j)) { - struct drm_encoder *encoder = - omap_connector_attached_encoder( - priv->connectors[*j]); - if (encoder) - mgr = omap_encoder_get_manager(encoder); - - } - (*j)++; - } - - /* if we couldn't find another connected connector, lets start - * looking at the unconnected connectors: - * - * note: it might not be immediately apparent, but thanks to - * the !mgr check in both this loop and the one above, the only - * way to enter this loop is with *j == priv->num_connectors, - * so idx can never go negative. - */ - while (*j < 2 * priv->num_connectors && !mgr) { - int idx = *j - priv->num_connectors; - if (!(connected_connectors & (1 << idx))) { - struct drm_encoder *encoder = - omap_connector_attached_encoder( - priv->connectors[idx]); - if (encoder) - mgr = omap_encoder_get_manager(encoder); - - } - (*j)++; - } - - crtc = omap_crtc_init(dev, ovl, priv->num_crtcs); - - if (!crtc) { - dev_err(dev->dev, "could not create CRTC: %s\n", - ovl->name); - return -ENOMEM; - } - - BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs)); - - priv->crtcs[priv->num_crtcs++] = crtc; - - return 0; -} - -static int create_plane(struct drm_device *dev, struct omap_overlay *ovl, - unsigned int possible_crtcs) -{ - struct omap_drm_private *priv = dev->dev_private; - struct drm_plane *plane = - omap_plane_init(dev, ovl, possible_crtcs, false); - - if (!plane) { - dev_err(dev->dev, "could not create plane: %s\n", - ovl->name); - return -ENOMEM; - } - - BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes)); - - priv->planes[priv->num_planes++] = plane; - - return 0; -} - -static int match_dev_name(struct omap_dss_device *dssdev, void *data) -{ - return !strcmp(dssdev->name, data); -} - -static unsigned int detect_connectors(struct drm_device *dev) -{ - struct omap_drm_private *priv = dev->dev_private; - unsigned int connected_connectors = 0; - int i; - - for (i = 0; i < priv->num_connectors; i++) { - struct drm_connector *connector = priv->connectors[i]; - if (omap_connector_detect(connector, true) == - connector_status_connected) { - connected_connectors |= (1 << i); - } - } - - return connected_connectors; -} - static int omap_modeset_init(struct drm_device *dev) { - const struct omap_drm_platform_data *pdata = dev->dev->platform_data; - struct omap_kms_platform_data *kms_pdata = NULL; struct omap_drm_private *priv = dev->dev_private; struct omap_dss_device *dssdev = NULL; - int i, j; - unsigned int connected_connectors = 0; + int num_ovls = dss_feat_get_num_ovls(); + int id; drm_mode_config_init(dev); - if (pdata && pdata->kms_pdata) { - kms_pdata = pdata->kms_pdata; + omap_drm_irq_install(dev); - /* if platform data is provided by the board file, use it to - * control which overlays, managers, and devices we own. - */ - for (i = 0; i < kms_pdata->mgr_cnt; i++) { - struct omap_overlay_manager *mgr = - omap_dss_get_overlay_manager( - kms_pdata->mgr_ids[i]); - create_encoder(dev, mgr); - } + /* + * Create private planes and CRTCs for the last NUM_CRTCs overlay + * plus manager: + */ + for (id = 0; id < min(num_crtc, num_ovls); id++) { + struct drm_plane *plane; + struct drm_crtc *crtc; - for (i = 0; i < kms_pdata->dev_cnt; i++) { - struct omap_dss_device *dssdev = - omap_dss_find_device( - (void *)kms_pdata->dev_names[i], - match_dev_name); - if (!dssdev) { - dev_warn(dev->dev, "no such dssdev: %s\n", - kms_pdata->dev_names[i]); - continue; - } - create_connector(dev, dssdev); - } + plane = omap_plane_init(dev, id, true); + crtc = omap_crtc_init(dev, plane, pipe2chan(id), id); - connected_connectors = detect_connectors(dev); + BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs)); + priv->crtcs[id] = crtc; + priv->num_crtcs++; - j = 0; - for (i = 0; i < kms_pdata->ovl_cnt; i++) { - struct omap_overlay *ovl = - omap_dss_get_overlay(kms_pdata->ovl_ids[i]); - create_crtc(dev, ovl, &j, connected_connectors); - } - - for (i = 0; i < kms_pdata->pln_cnt; i++) { - struct omap_overlay *ovl = - omap_dss_get_overlay(kms_pdata->pln_ids[i]); - create_plane(dev, ovl, (1 << priv->num_crtcs) - 1); - } - } else { - /* otherwise just grab up to CONFIG_DRM_OMAP_NUM_CRTCS and try - * to make educated guesses about everything else - */ - int max_overlays = min(omap_dss_get_num_overlays(), num_crtc); - - for (i = 0; i < omap_dss_get_num_overlay_managers(); i++) - create_encoder(dev, omap_dss_get_overlay_manager(i)); - - for_each_dss_dev(dssdev) { - create_connector(dev, dssdev); - } - - connected_connectors = detect_connectors(dev); - - j = 0; - for (i = 0; i < max_overlays; i++) { - create_crtc(dev, omap_dss_get_overlay(i), - &j, connected_connectors); - } - - /* use any remaining overlays as drm planes */ - for (; i < omap_dss_get_num_overlays(); i++) { - struct omap_overlay *ovl = omap_dss_get_overlay(i); - create_plane(dev, ovl, (1 << priv->num_crtcs) - 1); - } + priv->planes[id] = plane; + priv->num_planes++; } - /* for now keep the mapping of CRTCs and encoders static.. */ - for (i = 0; i < priv->num_encoders; i++) { - struct drm_encoder *encoder = priv->encoders[i]; - struct omap_overlay_manager *mgr = - omap_encoder_get_manager(encoder); + /* + * Create normal planes for the remaining overlays: + */ + for (; id < num_ovls; id++) { + struct drm_plane *plane = omap_plane_init(dev, id, false); - encoder->possible_crtcs = (1 << priv->num_crtcs) - 1; - - DBG("%s: possible_crtcs=%08x", mgr->name, - encoder->possible_crtcs); + BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes)); + priv->planes[priv->num_planes++] = plane; } - dump_video_chains(); + for_each_dss_dev(dssdev) { + struct drm_connector *connector; + struct drm_encoder *encoder; + + if (!dssdev->driver) { + dev_warn(dev->dev, "%s has no driver.. skipping it\n", + dssdev->name); + return 0; + } + + if (!(dssdev->driver->get_timings || + dssdev->driver->read_edid)) { + dev_warn(dev->dev, "%s driver does not support " + "get_timings or read_edid.. skipping it!\n", + dssdev->name); + return 0; + } + + encoder = omap_encoder_init(dev, dssdev); + + if (!encoder) { + dev_err(dev->dev, "could not create encoder: %s\n", + dssdev->name); + return -ENOMEM; + } + + connector = omap_connector_init(dev, + get_connector_type(dssdev), dssdev, encoder); + + if (!connector) { + dev_err(dev->dev, "could not create connector: %s\n", + dssdev->name); + return -ENOMEM; + } + + BUG_ON(priv->num_encoders >= ARRAY_SIZE(priv->encoders)); + BUG_ON(priv->num_connectors >= ARRAY_SIZE(priv->connectors)); + + priv->encoders[priv->num_encoders++] = encoder; + priv->connectors[priv->num_connectors++] = connector; + + drm_mode_connector_attach_encoder(connector, encoder); + + /* figure out which crtc's we can connect the encoder to: */ + encoder->possible_crtcs = 0; + for (id = 0; id < priv->num_crtcs; id++) { + enum omap_dss_output_id supported_outputs = + dss_feat_get_supported_outputs(pipe2chan(id)); + if (supported_outputs & dssdev->output->id) + encoder->possible_crtcs |= (1 << id); + } + } dev->mode_config.min_width = 32; dev->mode_config.min_height = 32; @@ -450,7 +229,7 @@ static int ioctl_gem_new(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_omap_gem_new *args = data; - DBG("%p:%p: size=0x%08x, flags=%08x", dev, file_priv, + VERB("%p:%p: size=0x%08x, flags=%08x", dev, file_priv, args->size.bytes, args->flags); return omap_gem_new_handle(dev, file_priv, args->size, args->flags, &args->handle); @@ -510,7 +289,7 @@ static int ioctl_gem_info(struct drm_device *dev, void *data, struct drm_gem_object *obj; int ret = 0; - DBG("%p:%p: handle=%d", dev, file_priv, args->handle); + VERB("%p:%p: handle=%d", dev, file_priv, args->handle); obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (!obj) @@ -565,14 +344,6 @@ static int dev_load(struct drm_device *dev, unsigned long flags) dev->dev_private = priv; - ret = omapdss_compat_init(); - if (ret) { - dev_err(dev->dev, "coult not init omapdss\n"); - dev->dev_private = NULL; - kfree(priv); - return ret; - } - priv->wq = alloc_ordered_workqueue("omapdrm", 0); INIT_LIST_HEAD(&priv->obj_list); @@ -584,10 +355,13 @@ static int dev_load(struct drm_device *dev, unsigned long flags) dev_err(dev->dev, "omap_modeset_init failed: ret=%d\n", ret); dev->dev_private = NULL; kfree(priv); - omapdss_compat_uninit(); return ret; } + ret = drm_vblank_init(dev, priv->num_crtcs); + if (ret) + dev_warn(dev->dev, "could not init vblank\n"); + priv->fbdev = omap_fbdev_init(dev); if (!priv->fbdev) { dev_warn(dev->dev, "omap_fbdev_init failed\n"); @@ -596,10 +370,6 @@ static int dev_load(struct drm_device *dev, unsigned long flags) drm_kms_helper_poll_init(dev); - ret = drm_vblank_init(dev, priv->num_crtcs); - if (ret) - dev_warn(dev->dev, "could not init vblank\n"); - return 0; } @@ -609,8 +379,9 @@ static int dev_unload(struct drm_device *dev) DBG("unload: dev=%p", dev); - drm_vblank_cleanup(dev); drm_kms_helper_poll_fini(dev); + drm_vblank_cleanup(dev); + omap_drm_irq_uninstall(dev); omap_fbdev_free(dev); omap_modeset_free(dev); @@ -619,8 +390,6 @@ static int dev_unload(struct drm_device *dev) flush_workqueue(priv->wq); destroy_workqueue(priv->wq); - omapdss_compat_uninit(); - kfree(dev->dev_private); dev->dev_private = NULL; @@ -680,7 +449,9 @@ static void dev_lastclose(struct drm_device *dev) } } + mutex_lock(&dev->mode_config.mutex); ret = drm_fb_helper_restore_fbdev_mode(priv->fbdev); + mutex_unlock(&dev->mode_config.mutex); if (ret) DBG("failed to restore crtc mode"); } @@ -695,60 +466,6 @@ static void dev_postclose(struct drm_device *dev, struct drm_file *file) DBG("postclose: dev=%p, file=%p", dev, file); } -/** - * enable_vblank - enable vblank interrupt events - * @dev: DRM device - * @crtc: which irq to enable - * - * Enable vblank interrupts for @crtc. If the device doesn't have - * a hardware vblank counter, this routine should be a no-op, since - * interrupts will have to stay on to keep the count accurate. - * - * RETURNS - * Zero on success, appropriate errno if the given @crtc's vblank - * interrupt cannot be enabled. - */ -static int dev_enable_vblank(struct drm_device *dev, int crtc) -{ - DBG("enable_vblank: dev=%p, crtc=%d", dev, crtc); - return 0; -} - -/** - * disable_vblank - disable vblank interrupt events - * @dev: DRM device - * @crtc: which irq to enable - * - * Disable vblank interrupts for @crtc. If the device doesn't have - * a hardware vblank counter, this routine should be a no-op, since - * interrupts will have to stay on to keep the count accurate. - */ -static void dev_disable_vblank(struct drm_device *dev, int crtc) -{ - DBG("disable_vblank: dev=%p, crtc=%d", dev, crtc); -} - -static irqreturn_t dev_irq_handler(DRM_IRQ_ARGS) -{ - return IRQ_HANDLED; -} - -static void dev_irq_preinstall(struct drm_device *dev) -{ - DBG("irq_preinstall: dev=%p", dev); -} - -static int dev_irq_postinstall(struct drm_device *dev) -{ - DBG("irq_postinstall: dev=%p", dev); - return 0; -} - -static void dev_irq_uninstall(struct drm_device *dev) -{ - DBG("irq_uninstall: dev=%p", dev); -} - static const struct vm_operations_struct omap_gem_vm_ops = { .fault = omap_gem_fault, .open = drm_gem_vm_open, @@ -778,12 +495,12 @@ static struct drm_driver omap_drm_driver = { .preclose = dev_preclose, .postclose = dev_postclose, .get_vblank_counter = drm_vblank_count, - .enable_vblank = dev_enable_vblank, - .disable_vblank = dev_disable_vblank, - .irq_preinstall = dev_irq_preinstall, - .irq_postinstall = dev_irq_postinstall, - .irq_uninstall = dev_irq_uninstall, - .irq_handler = dev_irq_handler, + .enable_vblank = omap_irq_enable_vblank, + .disable_vblank = omap_irq_disable_vblank, + .irq_preinstall = omap_irq_preinstall, + .irq_postinstall = omap_irq_postinstall, + .irq_uninstall = omap_irq_uninstall, + .irq_handler = omap_irq_handler, #ifdef CONFIG_DEBUG_FS .debugfs_init = omap_debugfs_init, .debugfs_cleanup = omap_debugfs_cleanup, diff --git a/drivers/staging/omapdrm/omap_drv.h b/drivers/staging/omapdrm/omap_drv.h index 1d4aea53b75d..cd1f22b0b124 100644 --- a/drivers/staging/omapdrm/omap_drv.h +++ b/drivers/staging/omapdrm/omap_drv.h @@ -28,6 +28,7 @@ #include #include "omap_drm.h" + #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__) #define VERB(fmt, ...) if (0) DRM_DEBUG(fmt, ##__VA_ARGS__) /* verbose debug */ @@ -39,6 +40,51 @@ */ #define MAX_MAPPERS 2 +/* parameters which describe (unrotated) coordinates of scanout within a fb: */ +struct omap_drm_window { + uint32_t rotation; + int32_t crtc_x, crtc_y; /* signed because can be offscreen */ + uint32_t crtc_w, crtc_h; + uint32_t src_x, src_y; + uint32_t src_w, src_h; +}; + +/* Once GO bit is set, we can't make further updates to shadowed registers + * until the GO bit is cleared. So various parts in the kms code that need + * to update shadowed registers queue up a pair of callbacks, pre_apply + * which is called before setting GO bit, and post_apply that is called + * after GO bit is cleared. The crtc manages the queuing, and everyone + * else goes thru omap_crtc_apply() using these callbacks so that the + * code which has to deal w/ GO bit state is centralized. + */ +struct omap_drm_apply { + struct list_head pending_node, queued_node; + bool queued; + void (*pre_apply)(struct omap_drm_apply *apply); + void (*post_apply)(struct omap_drm_apply *apply); +}; + +/* For transiently registering for different DSS irqs that various parts + * of the KMS code need during setup/configuration. We these are not + * necessarily the same as what drm_vblank_get/put() are requesting, and + * the hysteresis in drm_vblank_put() is not necessarily desirable for + * internal housekeeping related irq usage. + */ +struct omap_drm_irq { + struct list_head node; + uint32_t irqmask; + bool registered; + void (*irq)(struct omap_drm_irq *irq, uint32_t irqstatus); +}; + +/* For KMS code that needs to wait for a certain # of IRQs: + */ +struct omap_irq_wait; +struct omap_irq_wait * omap_irq_wait_init(struct drm_device *dev, + uint32_t irqmask, int count); +int omap_irq_wait(struct drm_device *dev, struct omap_irq_wait *wait, + unsigned long timeout); + struct omap_drm_private { uint32_t omaprev; @@ -58,6 +104,7 @@ struct omap_drm_private { struct workqueue_struct *wq; + /* list of GEM objects: */ struct list_head obj_list; bool has_dmm; @@ -65,6 +112,11 @@ struct omap_drm_private { /* properties: */ struct drm_property *rotation_prop; struct drm_property *zorder_prop; + + /* irq handling: */ + struct list_head irq_list; /* list of omap_drm_irq */ + uint32_t vblank_mask; /* irq bits set for userspace vblank */ + struct omap_drm_irq error_handler; }; /* this should probably be in drm-core to standardize amongst drivers */ @@ -75,15 +127,6 @@ struct omap_drm_private { #define DRM_REFLECT_X 4 #define DRM_REFLECT_Y 5 -/* parameters which describe (unrotated) coordinates of scanout within a fb: */ -struct omap_drm_window { - uint32_t rotation; - int32_t crtc_x, crtc_y; /* signed because can be offscreen */ - uint32_t crtc_w, crtc_h; - uint32_t src_x, src_y; - uint32_t src_w, src_h; -}; - #ifdef CONFIG_DEBUG_FS int omap_debugfs_init(struct drm_minor *minor); void omap_debugfs_cleanup(struct drm_minor *minor); @@ -92,23 +135,36 @@ void omap_gem_describe(struct drm_gem_object *obj, struct seq_file *m); void omap_gem_describe_objects(struct list_head *list, struct seq_file *m); #endif +int omap_irq_enable_vblank(struct drm_device *dev, int crtc); +void omap_irq_disable_vblank(struct drm_device *dev, int crtc); +irqreturn_t omap_irq_handler(DRM_IRQ_ARGS); +void omap_irq_preinstall(struct drm_device *dev); +int omap_irq_postinstall(struct drm_device *dev); +void omap_irq_uninstall(struct drm_device *dev); +void omap_irq_register(struct drm_device *dev, struct omap_drm_irq *irq); +void omap_irq_unregister(struct drm_device *dev, struct omap_drm_irq *irq); +int omap_drm_irq_uninstall(struct drm_device *dev); +int omap_drm_irq_install(struct drm_device *dev); + struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev); void omap_fbdev_free(struct drm_device *dev); +const struct omap_video_timings *omap_crtc_timings(struct drm_crtc *crtc); +enum omap_channel omap_crtc_channel(struct drm_crtc *crtc); +int omap_crtc_apply(struct drm_crtc *crtc, + struct omap_drm_apply *apply); struct drm_crtc *omap_crtc_init(struct drm_device *dev, - struct omap_overlay *ovl, int id); + struct drm_plane *plane, enum omap_channel channel, int id); struct drm_plane *omap_plane_init(struct drm_device *dev, - struct omap_overlay *ovl, unsigned int possible_crtcs, - bool priv); + int plane_id, bool private_plane); int omap_plane_dpms(struct drm_plane *plane, int mode); int omap_plane_mode_set(struct drm_plane *plane, struct drm_crtc *crtc, struct drm_framebuffer *fb, int crtc_x, int crtc_y, unsigned int crtc_w, unsigned int crtc_h, uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h); -void omap_plane_on_endwin(struct drm_plane *plane, + uint32_t src_w, uint32_t src_h, void (*fxn)(void *), void *arg); void omap_plane_install_properties(struct drm_plane *plane, struct drm_mode_object *obj); @@ -116,21 +172,25 @@ int omap_plane_set_property(struct drm_plane *plane, struct drm_property *property, uint64_t val); struct drm_encoder *omap_encoder_init(struct drm_device *dev, - struct omap_overlay_manager *mgr); -struct omap_overlay_manager *omap_encoder_get_manager( + struct omap_dss_device *dssdev); +int omap_encoder_set_enabled(struct drm_encoder *encoder, bool enabled); +int omap_encoder_update(struct drm_encoder *encoder, + struct omap_overlay_manager *mgr, + struct omap_video_timings *timings); + +struct drm_connector *omap_connector_init(struct drm_device *dev, + int connector_type, struct omap_dss_device *dssdev, struct drm_encoder *encoder); struct drm_encoder *omap_connector_attached_encoder( struct drm_connector *connector); -enum drm_connector_status omap_connector_detect( - struct drm_connector *connector, bool force); - -struct drm_connector *omap_connector_init(struct drm_device *dev, - int connector_type, struct omap_dss_device *dssdev); -void omap_connector_mode_set(struct drm_connector *connector, - struct drm_display_mode *mode); void omap_connector_flush(struct drm_connector *connector, int x, int y, int w, int h); +void copy_timings_omap_to_drm(struct drm_display_mode *mode, + struct omap_video_timings *timings); +void copy_timings_drm_to_omap(struct omap_video_timings *timings, + struct drm_display_mode *mode); + uint32_t omap_framebuffer_get_formats(uint32_t *pixel_formats, uint32_t max_formats, enum omap_color_mode supported_modes); struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev, @@ -207,6 +267,40 @@ static inline int align_pitch(int pitch, int width, int bpp) return ALIGN(pitch, 8 * bytespp); } +static inline enum omap_channel pipe2chan(int pipe) +{ + int num_mgrs = dss_feat_get_num_mgrs(); + + /* + * We usually don't want to create a CRTC for each manager, + * at least not until we have a way to expose private planes + * to userspace. Otherwise there would not be enough video + * pipes left for drm planes. The higher #'d managers tend + * to have more features so start in reverse order. + */ + return num_mgrs - pipe - 1; +} + +/* map crtc to vblank mask */ +static inline uint32_t pipe2vbl(int crtc) +{ + enum omap_channel channel = pipe2chan(crtc); + return dispc_mgr_get_vsync_irq(channel); +} + +static inline int crtc2pipe(struct drm_device *dev, struct drm_crtc *crtc) +{ + struct omap_drm_private *priv = dev->dev_private; + int i; + + for (i = 0; i < ARRAY_SIZE(priv->crtcs); i++) + if (priv->crtcs[i] == crtc) + return i; + + BUG(); /* bogus CRTC ptr */ + return -1; +} + /* should these be made into common util helpers? */ diff --git a/drivers/staging/omapdrm/omap_encoder.c b/drivers/staging/omapdrm/omap_encoder.c index 5341d5e3e317..e053160d2db3 100644 --- a/drivers/staging/omapdrm/omap_encoder.c +++ b/drivers/staging/omapdrm/omap_encoder.c @@ -22,37 +22,56 @@ #include "drm_crtc.h" #include "drm_crtc_helper.h" +#include + + /* * encoder funcs */ #define to_omap_encoder(x) container_of(x, struct omap_encoder, base) +/* The encoder and connector both map to same dssdev.. the encoder + * handles the 'active' parts, ie. anything the modifies the state + * of the hw, and the connector handles the 'read-only' parts, like + * detecting connection and reading edid. + */ struct omap_encoder { struct drm_encoder base; - struct omap_overlay_manager *mgr; + struct omap_dss_device *dssdev; }; static void omap_encoder_destroy(struct drm_encoder *encoder) { struct omap_encoder *omap_encoder = to_omap_encoder(encoder); - DBG("%s", omap_encoder->mgr->name); drm_encoder_cleanup(encoder); kfree(omap_encoder); } +static const struct drm_encoder_funcs omap_encoder_funcs = { + .destroy = omap_encoder_destroy, +}; + +/* + * The CRTC drm_crtc_helper_set_mode() doesn't really give us the right + * order.. the easiest way to work around this for now is to make all + * the encoder-helper's no-op's and have the omap_crtc code take care + * of the sequencing and call us in the right points. + * + * Eventually to handle connecting CRTCs to different encoders properly, + * either the CRTC helpers need to change or we need to replace + * drm_crtc_helper_set_mode(), but lets wait until atomic-modeset for + * that. + */ + static void omap_encoder_dpms(struct drm_encoder *encoder, int mode) { - struct omap_encoder *omap_encoder = to_omap_encoder(encoder); - DBG("%s: %d", omap_encoder->mgr->name, mode); } static bool omap_encoder_mode_fixup(struct drm_encoder *encoder, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct omap_encoder *omap_encoder = to_omap_encoder(encoder); - DBG("%s", omap_encoder->mgr->name); return true; } @@ -60,47 +79,16 @@ static void omap_encoder_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct omap_encoder *omap_encoder = to_omap_encoder(encoder); - struct drm_device *dev = encoder->dev; - struct omap_drm_private *priv = dev->dev_private; - int i; - - mode = adjusted_mode; - - DBG("%s: set mode: %dx%d", omap_encoder->mgr->name, - mode->hdisplay, mode->vdisplay); - - for (i = 0; i < priv->num_connectors; i++) { - struct drm_connector *connector = priv->connectors[i]; - if (connector->encoder == encoder) - omap_connector_mode_set(connector, mode); - - } } static void omap_encoder_prepare(struct drm_encoder *encoder) { - struct omap_encoder *omap_encoder = to_omap_encoder(encoder); - struct drm_encoder_helper_funcs *encoder_funcs = - encoder->helper_private; - DBG("%s", omap_encoder->mgr->name); - encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); } static void omap_encoder_commit(struct drm_encoder *encoder) { - struct omap_encoder *omap_encoder = to_omap_encoder(encoder); - struct drm_encoder_helper_funcs *encoder_funcs = - encoder->helper_private; - DBG("%s", omap_encoder->mgr->name); - omap_encoder->mgr->apply(omap_encoder->mgr); - encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); } -static const struct drm_encoder_funcs omap_encoder_funcs = { - .destroy = omap_encoder_destroy, -}; - static const struct drm_encoder_helper_funcs omap_encoder_helper_funcs = { .dpms = omap_encoder_dpms, .mode_fixup = omap_encoder_mode_fixup, @@ -109,23 +97,54 @@ static const struct drm_encoder_helper_funcs omap_encoder_helper_funcs = { .commit = omap_encoder_commit, }; -struct omap_overlay_manager *omap_encoder_get_manager( - struct drm_encoder *encoder) +/* + * Instead of relying on the helpers for modeset, the omap_crtc code + * calls these functions in the proper sequence. + */ + +int omap_encoder_set_enabled(struct drm_encoder *encoder, bool enabled) { struct omap_encoder *omap_encoder = to_omap_encoder(encoder); - return omap_encoder->mgr; + struct omap_dss_device *dssdev = omap_encoder->dssdev; + struct omap_dss_driver *dssdrv = dssdev->driver; + + if (enabled) { + return dssdrv->enable(dssdev); + } else { + dssdrv->disable(dssdev); + return 0; + } +} + +int omap_encoder_update(struct drm_encoder *encoder, + struct omap_overlay_manager *mgr, + struct omap_video_timings *timings) +{ + struct drm_device *dev = encoder->dev; + struct omap_encoder *omap_encoder = to_omap_encoder(encoder); + struct omap_dss_device *dssdev = omap_encoder->dssdev; + struct omap_dss_driver *dssdrv = dssdev->driver; + int ret; + + dssdev->output->manager = mgr; + + ret = dssdrv->check_timings(dssdev, timings); + if (ret) { + dev_err(dev->dev, "could not set timings: %d\n", ret); + return ret; + } + + dssdrv->set_timings(dssdev, timings); + + return 0; } /* initialize encoder */ struct drm_encoder *omap_encoder_init(struct drm_device *dev, - struct omap_overlay_manager *mgr) + struct omap_dss_device *dssdev) { struct drm_encoder *encoder = NULL; struct omap_encoder *omap_encoder; - struct omap_overlay_manager_info info; - int ret; - - DBG("%s", mgr->name); omap_encoder = kzalloc(sizeof(*omap_encoder), GFP_KERNEL); if (!omap_encoder) { @@ -133,33 +152,14 @@ struct drm_encoder *omap_encoder_init(struct drm_device *dev, goto fail; } - omap_encoder->mgr = mgr; + omap_encoder->dssdev = dssdev; + encoder = &omap_encoder->base; drm_encoder_init(dev, encoder, &omap_encoder_funcs, DRM_MODE_ENCODER_TMDS); drm_encoder_helper_add(encoder, &omap_encoder_helper_funcs); - mgr->get_manager_info(mgr, &info); - - /* TODO: fix hard-coded setup.. */ - info.default_color = 0x00000000; - info.trans_key = 0x00000000; - info.trans_key_type = OMAP_DSS_COLOR_KEY_GFX_DST; - info.trans_enabled = false; - - ret = mgr->set_manager_info(mgr, &info); - if (ret) { - dev_err(dev->dev, "could not set manager info\n"); - goto fail; - } - - ret = mgr->apply(mgr); - if (ret) { - dev_err(dev->dev, "could not apply\n"); - goto fail; - } - return encoder; fail: diff --git a/drivers/staging/omapdrm/omap_irq.c b/drivers/staging/omapdrm/omap_irq.c new file mode 100644 index 000000000000..2629ba7be6c8 --- /dev/null +++ b/drivers/staging/omapdrm/omap_irq.c @@ -0,0 +1,322 @@ +/* + * drivers/staging/omapdrm/omap_irq.c + * + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include "omap_drv.h" + +static DEFINE_SPINLOCK(list_lock); + +static void omap_irq_error_handler(struct omap_drm_irq *irq, + uint32_t irqstatus) +{ + DRM_ERROR("errors: %08x\n", irqstatus); +} + +/* call with list_lock and dispc runtime held */ +static void omap_irq_update(struct drm_device *dev) +{ + struct omap_drm_private *priv = dev->dev_private; + struct omap_drm_irq *irq; + uint32_t irqmask = priv->vblank_mask; + + BUG_ON(!spin_is_locked(&list_lock)); + + list_for_each_entry(irq, &priv->irq_list, node) + irqmask |= irq->irqmask; + + DBG("irqmask=%08x", irqmask); + + dispc_write_irqenable(irqmask); + dispc_read_irqenable(); /* flush posted write */ +} + +void omap_irq_register(struct drm_device *dev, struct omap_drm_irq *irq) +{ + struct omap_drm_private *priv = dev->dev_private; + unsigned long flags; + + dispc_runtime_get(); + spin_lock_irqsave(&list_lock, flags); + + if (!WARN_ON(irq->registered)) { + irq->registered = true; + list_add(&irq->node, &priv->irq_list); + omap_irq_update(dev); + } + + spin_unlock_irqrestore(&list_lock, flags); + dispc_runtime_put(); +} + +void omap_irq_unregister(struct drm_device *dev, struct omap_drm_irq *irq) +{ + unsigned long flags; + + dispc_runtime_get(); + spin_lock_irqsave(&list_lock, flags); + + if (!WARN_ON(!irq->registered)) { + irq->registered = false; + list_del(&irq->node); + omap_irq_update(dev); + } + + spin_unlock_irqrestore(&list_lock, flags); + dispc_runtime_put(); +} + +struct omap_irq_wait { + struct omap_drm_irq irq; + int count; +}; + +static DECLARE_WAIT_QUEUE_HEAD(wait_event); + +static void wait_irq(struct omap_drm_irq *irq, uint32_t irqstatus) +{ + struct omap_irq_wait *wait = + container_of(irq, struct omap_irq_wait, irq); + wait->count--; + wake_up_all(&wait_event); +} + +struct omap_irq_wait * omap_irq_wait_init(struct drm_device *dev, + uint32_t irqmask, int count) +{ + struct omap_irq_wait *wait = kzalloc(sizeof(*wait), GFP_KERNEL); + wait->irq.irq = wait_irq; + wait->irq.irqmask = irqmask; + wait->count = count; + omap_irq_register(dev, &wait->irq); + return wait; +} + +int omap_irq_wait(struct drm_device *dev, struct omap_irq_wait *wait, + unsigned long timeout) +{ + int ret = wait_event_timeout(wait_event, (wait->count <= 0), timeout); + omap_irq_unregister(dev, &wait->irq); + kfree(wait); + if (ret == 0) + return -1; + return 0; +} + +/** + * enable_vblank - enable vblank interrupt events + * @dev: DRM device + * @crtc: which irq to enable + * + * Enable vblank interrupts for @crtc. If the device doesn't have + * a hardware vblank counter, this routine should be a no-op, since + * interrupts will have to stay on to keep the count accurate. + * + * RETURNS + * Zero on success, appropriate errno if the given @crtc's vblank + * interrupt cannot be enabled. + */ +int omap_irq_enable_vblank(struct drm_device *dev, int crtc) +{ + struct omap_drm_private *priv = dev->dev_private; + unsigned long flags; + + DBG("dev=%p, crtc=%d", dev, crtc); + + dispc_runtime_get(); + spin_lock_irqsave(&list_lock, flags); + priv->vblank_mask |= pipe2vbl(crtc); + omap_irq_update(dev); + spin_unlock_irqrestore(&list_lock, flags); + dispc_runtime_put(); + + return 0; +} + +/** + * disable_vblank - disable vblank interrupt events + * @dev: DRM device + * @crtc: which irq to enable + * + * Disable vblank interrupts for @crtc. If the device doesn't have + * a hardware vblank counter, this routine should be a no-op, since + * interrupts will have to stay on to keep the count accurate. + */ +void omap_irq_disable_vblank(struct drm_device *dev, int crtc) +{ + struct omap_drm_private *priv = dev->dev_private; + unsigned long flags; + + DBG("dev=%p, crtc=%d", dev, crtc); + + dispc_runtime_get(); + spin_lock_irqsave(&list_lock, flags); + priv->vblank_mask &= ~pipe2vbl(crtc); + omap_irq_update(dev); + spin_unlock_irqrestore(&list_lock, flags); + dispc_runtime_put(); +} + +irqreturn_t omap_irq_handler(DRM_IRQ_ARGS) +{ + struct drm_device *dev = (struct drm_device *) arg; + struct omap_drm_private *priv = dev->dev_private; + struct omap_drm_irq *handler, *n; + unsigned long flags; + unsigned int id; + u32 irqstatus; + + irqstatus = dispc_read_irqstatus(); + dispc_clear_irqstatus(irqstatus); + dispc_read_irqstatus(); /* flush posted write */ + + VERB("irqs: %08x", irqstatus); + + for (id = 0; id < priv->num_crtcs; id++) + if (irqstatus & pipe2vbl(id)) + drm_handle_vblank(dev, id); + + spin_lock_irqsave(&list_lock, flags); + list_for_each_entry_safe(handler, n, &priv->irq_list, node) { + if (handler->irqmask & irqstatus) { + spin_unlock_irqrestore(&list_lock, flags); + handler->irq(handler, handler->irqmask & irqstatus); + spin_lock_irqsave(&list_lock, flags); + } + } + spin_unlock_irqrestore(&list_lock, flags); + + return IRQ_HANDLED; +} + +void omap_irq_preinstall(struct drm_device *dev) +{ + DBG("dev=%p", dev); + dispc_runtime_get(); + dispc_clear_irqstatus(0xffffffff); + dispc_runtime_put(); +} + +int omap_irq_postinstall(struct drm_device *dev) +{ + struct omap_drm_private *priv = dev->dev_private; + struct omap_drm_irq *error_handler = &priv->error_handler; + + DBG("dev=%p", dev); + + INIT_LIST_HEAD(&priv->irq_list); + + error_handler->irq = omap_irq_error_handler; + error_handler->irqmask = DISPC_IRQ_OCP_ERR; + + /* for now ignore DISPC_IRQ_SYNC_LOST_DIGIT.. really I think + * we just need to ignore it while enabling tv-out + */ + error_handler->irqmask &= ~DISPC_IRQ_SYNC_LOST_DIGIT; + + omap_irq_register(dev, error_handler); + + return 0; +} + +void omap_irq_uninstall(struct drm_device *dev) +{ + DBG("dev=%p", dev); + // TODO prolly need to call drm_irq_uninstall() somewhere too +} + +/* + * We need a special version, instead of just using drm_irq_install(), + * because we need to register the irq via omapdss. Once omapdss and + * omapdrm are merged together we can assign the dispc hwmod data to + * ourselves and drop these and just use drm_irq_{install,uninstall}() + */ + +int omap_drm_irq_install(struct drm_device *dev) +{ + int ret; + + mutex_lock(&dev->struct_mutex); + + if (dev->irq_enabled) { + mutex_unlock(&dev->struct_mutex); + return -EBUSY; + } + dev->irq_enabled = 1; + mutex_unlock(&dev->struct_mutex); + + /* Before installing handler */ + if (dev->driver->irq_preinstall) + dev->driver->irq_preinstall(dev); + + ret = dispc_request_irq(dev->driver->irq_handler, dev); + + if (ret < 0) { + mutex_lock(&dev->struct_mutex); + dev->irq_enabled = 0; + mutex_unlock(&dev->struct_mutex); + return ret; + } + + /* After installing handler */ + if (dev->driver->irq_postinstall) + ret = dev->driver->irq_postinstall(dev); + + if (ret < 0) { + mutex_lock(&dev->struct_mutex); + dev->irq_enabled = 0; + mutex_unlock(&dev->struct_mutex); + dispc_free_irq(dev); + } + + return ret; +} + +int omap_drm_irq_uninstall(struct drm_device *dev) +{ + unsigned long irqflags; + int irq_enabled, i; + + mutex_lock(&dev->struct_mutex); + irq_enabled = dev->irq_enabled; + dev->irq_enabled = 0; + mutex_unlock(&dev->struct_mutex); + + /* + * Wake up any waiters so they don't hang. + */ + if (dev->num_crtcs) { + spin_lock_irqsave(&dev->vbl_lock, irqflags); + for (i = 0; i < dev->num_crtcs; i++) { + DRM_WAKEUP(&dev->vbl_queue[i]); + dev->vblank_enabled[i] = 0; + dev->last_vblank[i] = + dev->driver->get_vblank_counter(dev, i); + } + spin_unlock_irqrestore(&dev->vbl_lock, irqflags); + } + + if (!irq_enabled) + return -EINVAL; + + if (dev->driver->irq_uninstall) + dev->driver->irq_uninstall(dev); + + dispc_free_irq(dev); + + return 0; +} diff --git a/drivers/staging/omapdrm/omap_plane.c b/drivers/staging/omapdrm/omap_plane.c index 2a8e5bab49c9..bb989d7f026d 100644 --- a/drivers/staging/omapdrm/omap_plane.c +++ b/drivers/staging/omapdrm/omap_plane.c @@ -41,12 +41,14 @@ struct callback { struct omap_plane { struct drm_plane base; - struct omap_overlay *ovl; + int id; /* TODO rename omap_plane -> omap_plane_id in omapdss so I can use the enum */ + const char *name; struct omap_overlay_info info; + struct omap_drm_apply apply; /* position/orientation of scanout within the fb: */ struct omap_drm_window win; - + bool enabled; /* last fb that we pinned: */ struct drm_framebuffer *pinned_fb; @@ -54,189 +56,15 @@ struct omap_plane { uint32_t nformats; uint32_t formats[32]; - /* for synchronizing access to unpins fifo */ - struct mutex unpin_mutex; + struct omap_drm_irq error_irq; - /* set of bo's pending unpin until next END_WIN irq */ + /* set of bo's pending unpin until next post_apply() */ DECLARE_KFIFO_PTR(unpin_fifo, struct drm_gem_object *); - int num_unpins, pending_num_unpins; - /* for deferred unpin when we need to wait for scanout complete irq */ - struct work_struct work; - - /* callback on next endwin irq */ - struct callback endwin; + // XXX maybe get rid of this and handle vblank in crtc too? + struct callback apply_done_cb; }; -/* map from ovl->id to the irq we are interested in for scanout-done */ -static const uint32_t id2irq[] = { - [OMAP_DSS_GFX] = DISPC_IRQ_GFX_END_WIN, - [OMAP_DSS_VIDEO1] = DISPC_IRQ_VID1_END_WIN, - [OMAP_DSS_VIDEO2] = DISPC_IRQ_VID2_END_WIN, - [OMAP_DSS_VIDEO3] = DISPC_IRQ_VID3_END_WIN, -}; - -static void dispc_isr(void *arg, uint32_t mask) -{ - struct drm_plane *plane = arg; - struct omap_plane *omap_plane = to_omap_plane(plane); - struct omap_drm_private *priv = plane->dev->dev_private; - - omap_dispc_unregister_isr(dispc_isr, plane, - id2irq[omap_plane->ovl->id]); - - queue_work(priv->wq, &omap_plane->work); -} - -static void unpin_worker(struct work_struct *work) -{ - struct omap_plane *omap_plane = - container_of(work, struct omap_plane, work); - struct callback endwin; - - mutex_lock(&omap_plane->unpin_mutex); - DBG("unpinning %d of %d", omap_plane->num_unpins, - omap_plane->num_unpins + omap_plane->pending_num_unpins); - while (omap_plane->num_unpins > 0) { - struct drm_gem_object *bo = NULL; - int ret = kfifo_get(&omap_plane->unpin_fifo, &bo); - WARN_ON(!ret); - omap_gem_put_paddr(bo); - drm_gem_object_unreference_unlocked(bo); - omap_plane->num_unpins--; - } - endwin = omap_plane->endwin; - omap_plane->endwin.fxn = NULL; - mutex_unlock(&omap_plane->unpin_mutex); - - if (endwin.fxn) - endwin.fxn(endwin.arg); -} - -static void install_irq(struct drm_plane *plane) -{ - struct omap_plane *omap_plane = to_omap_plane(plane); - struct omap_overlay *ovl = omap_plane->ovl; - int ret; - - ret = omap_dispc_register_isr(dispc_isr, plane, id2irq[ovl->id]); - - /* - * omapdss has upper limit on # of registered irq handlers, - * which we shouldn't hit.. but if we do the limit should - * be raised or bad things happen: - */ - WARN_ON(ret == -EBUSY); -} - -/* push changes down to dss2 */ -static int commit(struct drm_plane *plane) -{ - struct drm_device *dev = plane->dev; - struct omap_plane *omap_plane = to_omap_plane(plane); - struct omap_overlay *ovl = omap_plane->ovl; - struct omap_overlay_info *info = &omap_plane->info; - int ret; - - DBG("%s", ovl->name); - DBG("%dx%d -> %dx%d (%d)", info->width, info->height, info->out_width, - info->out_height, info->screen_width); - DBG("%d,%d %08x %08x", info->pos_x, info->pos_y, - info->paddr, info->p_uv_addr); - - /* NOTE: do we want to do this at all here, or just wait - * for dpms(ON) since other CRTC's may not have their mode - * set yet, so fb dimensions may still change.. - */ - ret = ovl->set_overlay_info(ovl, info); - if (ret) { - dev_err(dev->dev, "could not set overlay info\n"); - return ret; - } - - mutex_lock(&omap_plane->unpin_mutex); - omap_plane->num_unpins += omap_plane->pending_num_unpins; - omap_plane->pending_num_unpins = 0; - mutex_unlock(&omap_plane->unpin_mutex); - - /* our encoder doesn't necessarily get a commit() after this, in - * particular in the dpms() and mode_set_base() cases, so force the - * manager to update: - * - * could this be in the encoder somehow? - */ - if (ovl->manager) { - ret = ovl->manager->apply(ovl->manager); - if (ret) { - dev_err(dev->dev, "could not apply settings\n"); - return ret; - } - - /* - * NOTE: really this should be atomic w/ mgr->apply() but - * omapdss does not expose such an API - */ - if (omap_plane->num_unpins > 0) - install_irq(plane); - - } else { - struct omap_drm_private *priv = dev->dev_private; - queue_work(priv->wq, &omap_plane->work); - } - - - if (ovl->is_enabled(ovl)) { - omap_framebuffer_flush(plane->fb, info->pos_x, info->pos_y, - info->out_width, info->out_height); - } - - return 0; -} - -/* when CRTC that we are attached to has potentially changed, this checks - * if we are attached to proper manager, and if necessary updates. - */ -static void update_manager(struct drm_plane *plane) -{ - struct omap_drm_private *priv = plane->dev->dev_private; - struct omap_plane *omap_plane = to_omap_plane(plane); - struct omap_overlay *ovl = omap_plane->ovl; - struct omap_overlay_manager *mgr = NULL; - int i; - - if (plane->crtc) { - for (i = 0; i < priv->num_encoders; i++) { - struct drm_encoder *encoder = priv->encoders[i]; - if (encoder->crtc == plane->crtc) { - mgr = omap_encoder_get_manager(encoder); - break; - } - } - } - - if (ovl->manager != mgr) { - bool enabled = ovl->is_enabled(ovl); - - /* don't switch things around with enabled overlays: */ - if (enabled) - omap_plane_dpms(plane, DRM_MODE_DPMS_OFF); - - if (ovl->manager) { - DBG("disconnecting %s from %s", ovl->name, - ovl->manager->name); - ovl->unset_manager(ovl); - } - - if (mgr) { - DBG("connecting %s to %s", ovl->name, mgr->name); - ovl->set_manager(ovl, mgr); - } - - if (enabled && mgr) - omap_plane_dpms(plane, DRM_MODE_DPMS_ON); - } -} - static void unpin(void *arg, struct drm_gem_object *bo) { struct drm_plane *plane = arg; @@ -244,7 +72,6 @@ static void unpin(void *arg, struct drm_gem_object *bo) if (kfifo_put(&omap_plane->unpin_fifo, (const struct drm_gem_object **)&bo)) { - omap_plane->pending_num_unpins++; /* also hold a ref so it isn't free'd while pinned */ drm_gem_object_reference(bo); } else { @@ -264,13 +91,19 @@ static int update_pin(struct drm_plane *plane, struct drm_framebuffer *fb) DBG("%p -> %p", pinned_fb, fb); - mutex_lock(&omap_plane->unpin_mutex); + if (fb) + drm_framebuffer_reference(fb); + ret = omap_framebuffer_replace(pinned_fb, fb, plane, unpin); - mutex_unlock(&omap_plane->unpin_mutex); + + if (pinned_fb) + drm_framebuffer_unreference(pinned_fb); if (ret) { dev_err(plane->dev->dev, "could not swap %p -> %p\n", omap_plane->pinned_fb, fb); + if (fb) + drm_framebuffer_unreference(fb); omap_plane->pinned_fb = NULL; return ret; } @@ -281,31 +114,90 @@ static int update_pin(struct drm_plane *plane, struct drm_framebuffer *fb) return 0; } -/* update parameters that are dependent on the framebuffer dimensions and - * position within the fb that this plane scans out from. This is called - * when framebuffer or x,y base may have changed. - */ -static void update_scanout(struct drm_plane *plane) +static void omap_plane_pre_apply(struct omap_drm_apply *apply) { - struct omap_plane *omap_plane = to_omap_plane(plane); - struct omap_overlay_info *info = &omap_plane->info; + struct omap_plane *omap_plane = + container_of(apply, struct omap_plane, apply); struct omap_drm_window *win = &omap_plane->win; + struct drm_plane *plane = &omap_plane->base; + struct drm_device *dev = plane->dev; + struct omap_overlay_info *info = &omap_plane->info; + struct drm_crtc *crtc = plane->crtc; + enum omap_channel channel; + bool enabled = omap_plane->enabled && crtc; + bool ilace, replication; int ret; - ret = update_pin(plane, plane->fb); - if (ret) { - dev_err(plane->dev->dev, - "could not pin fb: %d\n", ret); - omap_plane_dpms(plane, DRM_MODE_DPMS_OFF); + DBG("%s, enabled=%d", omap_plane->name, enabled); + + /* if fb has changed, pin new fb: */ + update_pin(plane, enabled ? plane->fb : NULL); + + if (!enabled) { + dispc_ovl_enable(omap_plane->id, false); return; } + channel = omap_crtc_channel(crtc); + + /* update scanout: */ omap_framebuffer_update_scanout(plane->fb, win, info); - DBG("%s: %d,%d: %08x %08x (%d)", omap_plane->ovl->name, - win->src_x, win->src_y, - (u32)info->paddr, (u32)info->p_uv_addr, + DBG("%dx%d -> %dx%d (%d)", info->width, info->height, + info->out_width, info->out_height, info->screen_width); + DBG("%d,%d %08x %08x", info->pos_x, info->pos_y, + info->paddr, info->p_uv_addr); + + /* TODO: */ + ilace = false; + replication = false; + + /* and finally, update omapdss: */ + ret = dispc_ovl_setup(omap_plane->id, info, + replication, omap_crtc_timings(crtc), false); + if (ret) { + dev_err(dev->dev, "dispc_ovl_setup failed: %d\n", ret); + return; + } + + dispc_ovl_enable(omap_plane->id, true); + dispc_ovl_set_channel_out(omap_plane->id, channel); +} + +static void omap_plane_post_apply(struct omap_drm_apply *apply) +{ + struct omap_plane *omap_plane = + container_of(apply, struct omap_plane, apply); + struct drm_plane *plane = &omap_plane->base; + struct omap_overlay_info *info = &omap_plane->info; + struct drm_gem_object *bo = NULL; + struct callback cb; + + cb = omap_plane->apply_done_cb; + omap_plane->apply_done_cb.fxn = NULL; + + while (kfifo_get(&omap_plane->unpin_fifo, &bo)) { + omap_gem_put_paddr(bo); + drm_gem_object_unreference_unlocked(bo); + } + + if (cb.fxn) + cb.fxn(cb.arg); + + if (omap_plane->enabled) { + omap_framebuffer_flush(plane->fb, info->pos_x, info->pos_y, + info->out_width, info->out_height); + } +} + +static int apply(struct drm_plane *plane) +{ + if (plane->crtc) { + struct omap_plane *omap_plane = to_omap_plane(plane); + return omap_crtc_apply(plane->crtc, &omap_plane->apply); + } + return 0; } int omap_plane_mode_set(struct drm_plane *plane, @@ -313,7 +205,8 @@ int omap_plane_mode_set(struct drm_plane *plane, int crtc_x, int crtc_y, unsigned int crtc_w, unsigned int crtc_h, uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h) + uint32_t src_w, uint32_t src_h, + void (*fxn)(void *), void *arg) { struct omap_plane *omap_plane = to_omap_plane(plane); struct omap_drm_window *win = &omap_plane->win; @@ -329,17 +222,20 @@ int omap_plane_mode_set(struct drm_plane *plane, win->src_w = src_w >> 16; win->src_h = src_h >> 16; - /* note: this is done after this fxn returns.. but if we need - * to do a commit/update_scanout, etc before this returns we - * need the current value. - */ + if (fxn) { + /* omap_crtc should ensure that a new page flip + * isn't permitted while there is one pending: + */ + BUG_ON(omap_plane->apply_done_cb.fxn); + + omap_plane->apply_done_cb.fxn = fxn; + omap_plane->apply_done_cb.arg = arg; + } + plane->fb = fb; plane->crtc = crtc; - update_scanout(plane); - update_manager(plane); - - return 0; + return apply(plane); } static int omap_plane_update(struct drm_plane *plane, @@ -349,9 +245,12 @@ static int omap_plane_update(struct drm_plane *plane, uint32_t src_x, uint32_t src_y, uint32_t src_w, uint32_t src_h) { - omap_plane_mode_set(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h, - src_x, src_y, src_w, src_h); - return omap_plane_dpms(plane, DRM_MODE_DPMS_ON); + struct omap_plane *omap_plane = to_omap_plane(plane); + omap_plane->enabled = true; + return omap_plane_mode_set(plane, crtc, fb, + crtc_x, crtc_y, crtc_w, crtc_h, + src_x, src_y, src_w, src_h, + NULL, NULL); } static int omap_plane_disable(struct drm_plane *plane) @@ -364,48 +263,32 @@ static int omap_plane_disable(struct drm_plane *plane) static void omap_plane_destroy(struct drm_plane *plane) { struct omap_plane *omap_plane = to_omap_plane(plane); - DBG("%s", omap_plane->ovl->name); + + DBG("%s", omap_plane->name); + + omap_irq_unregister(plane->dev, &omap_plane->error_irq); + omap_plane_disable(plane); drm_plane_cleanup(plane); - WARN_ON(omap_plane->pending_num_unpins + omap_plane->num_unpins > 0); + + WARN_ON(!kfifo_is_empty(&omap_plane->unpin_fifo)); kfifo_free(&omap_plane->unpin_fifo); + kfree(omap_plane); } int omap_plane_dpms(struct drm_plane *plane, int mode) { struct omap_plane *omap_plane = to_omap_plane(plane); - struct omap_overlay *ovl = omap_plane->ovl; - int r; + bool enabled = (mode == DRM_MODE_DPMS_ON); + int ret = 0; - DBG("%s: %d", omap_plane->ovl->name, mode); - - if (mode == DRM_MODE_DPMS_ON) { - update_scanout(plane); - r = commit(plane); - if (!r) - r = ovl->enable(ovl); - } else { - struct omap_drm_private *priv = plane->dev->dev_private; - r = ovl->disable(ovl); - update_pin(plane, NULL); - queue_work(priv->wq, &omap_plane->work); + if (enabled != omap_plane->enabled) { + omap_plane->enabled = enabled; + ret = apply(plane); } - return r; -} - -void omap_plane_on_endwin(struct drm_plane *plane, - void (*fxn)(void *), void *arg) -{ - struct omap_plane *omap_plane = to_omap_plane(plane); - - mutex_lock(&omap_plane->unpin_mutex); - omap_plane->endwin.fxn = fxn; - omap_plane->endwin.arg = arg; - mutex_unlock(&omap_plane->unpin_mutex); - - install_irq(plane); + return ret; } /* helper to install properties which are common to planes and crtcs */ @@ -454,25 +337,13 @@ int omap_plane_set_property(struct drm_plane *plane, int ret = -EINVAL; if (property == priv->rotation_prop) { - struct omap_overlay *ovl = omap_plane->ovl; - - DBG("%s: rotation: %02x", ovl->name, (uint32_t)val); + DBG("%s: rotation: %02x", omap_plane->name, (uint32_t)val); omap_plane->win.rotation = val; - - if (ovl->is_enabled(ovl)) - ret = omap_plane_dpms(plane, DRM_MODE_DPMS_ON); - else - ret = 0; + ret = apply(plane); } else if (property == priv->zorder_prop) { - struct omap_overlay *ovl = omap_plane->ovl; - - DBG("%s: zorder: %d", ovl->name, (uint32_t)val); + DBG("%s: zorder: %02x", omap_plane->name, (uint32_t)val); omap_plane->info.zorder = val; - - if (ovl->is_enabled(ovl)) - ret = omap_plane_dpms(plane, DRM_MODE_DPMS_ON); - else - ret = 0; + ret = apply(plane); } return ret; @@ -485,20 +356,38 @@ static const struct drm_plane_funcs omap_plane_funcs = { .set_property = omap_plane_set_property, }; +static void omap_plane_error_irq(struct omap_drm_irq *irq, uint32_t irqstatus) +{ + struct omap_plane *omap_plane = + container_of(irq, struct omap_plane, error_irq); + DRM_ERROR("%s: errors: %08x\n", omap_plane->name, irqstatus); +} + +static const char *plane_names[] = { + [OMAP_DSS_GFX] = "gfx", + [OMAP_DSS_VIDEO1] = "vid1", + [OMAP_DSS_VIDEO2] = "vid2", + [OMAP_DSS_VIDEO3] = "vid3", +}; + +static const uint32_t error_irqs[] = { + [OMAP_DSS_GFX] = DISPC_IRQ_GFX_FIFO_UNDERFLOW, + [OMAP_DSS_VIDEO1] = DISPC_IRQ_VID1_FIFO_UNDERFLOW, + [OMAP_DSS_VIDEO2] = DISPC_IRQ_VID2_FIFO_UNDERFLOW, + [OMAP_DSS_VIDEO3] = DISPC_IRQ_VID3_FIFO_UNDERFLOW, +}; + /* initialize plane */ struct drm_plane *omap_plane_init(struct drm_device *dev, - struct omap_overlay *ovl, unsigned int possible_crtcs, - bool priv) + int id, bool private_plane) { + struct omap_drm_private *priv = dev->dev_private; struct drm_plane *plane = NULL; struct omap_plane *omap_plane; + struct omap_overlay_info *info; int ret; - DBG("%s: possible_crtcs=%08x, priv=%d", ovl->name, - possible_crtcs, priv); - - /* friendly reminder to update table for future hw: */ - WARN_ON(ovl->id >= ARRAY_SIZE(id2irq)); + DBG("%s: priv=%d", plane_names[id], private_plane); omap_plane = kzalloc(sizeof(*omap_plane), GFP_KERNEL); if (!omap_plane) { @@ -506,47 +395,50 @@ struct drm_plane *omap_plane_init(struct drm_device *dev, goto fail; } - mutex_init(&omap_plane->unpin_mutex); - ret = kfifo_alloc(&omap_plane->unpin_fifo, 16, GFP_KERNEL); if (ret) { dev_err(dev->dev, "could not allocate unpin FIFO\n"); goto fail; } - INIT_WORK(&omap_plane->work, unpin_worker); - omap_plane->nformats = omap_framebuffer_get_formats( omap_plane->formats, ARRAY_SIZE(omap_plane->formats), - ovl->supported_modes); - omap_plane->ovl = ovl; + dss_feat_get_supported_color_modes(id)); + omap_plane->id = id; + omap_plane->name = plane_names[id]; + plane = &omap_plane->base; - drm_plane_init(dev, plane, possible_crtcs, &omap_plane_funcs, - omap_plane->formats, omap_plane->nformats, priv); + omap_plane->apply.pre_apply = omap_plane_pre_apply; + omap_plane->apply.post_apply = omap_plane_post_apply; + + omap_plane->error_irq.irqmask = error_irqs[id]; + omap_plane->error_irq.irq = omap_plane_error_irq; + omap_irq_register(dev, &omap_plane->error_irq); + + drm_plane_init(dev, plane, (1 << priv->num_crtcs) - 1, &omap_plane_funcs, + omap_plane->formats, omap_plane->nformats, private_plane); omap_plane_install_properties(plane, &plane->base); /* get our starting configuration, set defaults for parameters * we don't currently use, etc: */ - ovl->get_overlay_info(ovl, &omap_plane->info); - omap_plane->info.rotation_type = OMAP_DSS_ROT_DMA; - omap_plane->info.rotation = OMAP_DSS_ROT_0; - omap_plane->info.global_alpha = 0xff; - omap_plane->info.mirror = 0; + info = &omap_plane->info; + info->rotation_type = OMAP_DSS_ROT_DMA; + info->rotation = OMAP_DSS_ROT_0; + info->global_alpha = 0xff; + info->mirror = 0; /* Set defaults depending on whether we are a CRTC or overlay * layer. * TODO add ioctl to give userspace an API to change this.. this * will come in a subsequent patch. */ - if (priv) + if (private_plane) omap_plane->info.zorder = 0; else - omap_plane->info.zorder = ovl->id; - - update_manager(plane); + omap_plane->info.zorder = id; return plane; From 412fc87093df7d40d187f6f167524221ae8080b2 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 20 Dec 2012 08:30:03 -0600 Subject: [PATCH 137/553] staging: drm/omap: fix flags in dma buf exporting This patch fixes flags passed to dma buf exporting. Signed-off-by: Seung-Woo Kim Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman --- drivers/staging/omapdrm/omap_gem_dmabuf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/omapdrm/omap_gem_dmabuf.c b/drivers/staging/omapdrm/omap_gem_dmabuf.c index 9a302062b031..eabb8b57f6c3 100644 --- a/drivers/staging/omapdrm/omap_gem_dmabuf.c +++ b/drivers/staging/omapdrm/omap_gem_dmabuf.c @@ -194,7 +194,7 @@ struct dma_buf_ops omap_dmabuf_ops = { struct dma_buf *omap_gem_prime_export(struct drm_device *dev, struct drm_gem_object *obj, int flags) { - return dma_buf_export(obj, &omap_dmabuf_ops, obj->size, 0600); + return dma_buf_export(obj, &omap_dmabuf_ops, obj->size, flags); } struct drm_gem_object *omap_gem_prime_import(struct drm_device *dev, From 4d27b2ca154eff58f4d7f34e4cd374c1070a56fc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Tue, 25 Dec 2012 15:58:37 +0100 Subject: [PATCH 138/553] staging: drm/imx: check return value of ipu_reset() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ipu_reset() can fail with a timeout. Check the return value and act appropriately. Signed-off-by: Lothar Waßmann Acked-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/imx-drm/ipu-v3/ipu-common.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/staging/imx-drm/ipu-v3/ipu-common.c b/drivers/staging/imx-drm/ipu-v3/ipu-common.c index 677e665ca86d..f7059cddd7fd 100644 --- a/drivers/staging/imx-drm/ipu-v3/ipu-common.c +++ b/drivers/staging/imx-drm/ipu-v3/ipu-common.c @@ -1104,7 +1104,9 @@ static int ipu_probe(struct platform_device *pdev) if (ret) goto out_failed_irq; - ipu_reset(ipu); + ret = ipu_reset(ipu); + if (ret) + goto out_failed_reset; /* Set MCU_T to divide MCU access window into 2 */ ipu_cm_write(ipu, 0x00400000L | (IPU_MCU_T_DEFAULT << 18), @@ -1129,6 +1131,7 @@ failed_add_clients: ipu_submodules_exit(ipu); failed_submodules_init: ipu_irq_exit(ipu); +out_failed_reset: out_failed_irq: clk_disable_unprepare(ipu->clk); failed_clk_get: From 9a8f3f4490922dd62556a8004aa06bc3f1054894 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Tue, 25 Dec 2012 15:58:38 +0100 Subject: [PATCH 139/553] staging: drm/imx: several bug fixes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit - convert bogus IS_ERR_OR_NULL() to IS_ERR() - fix copy/paste error - check return value of ipu_crtc_init() Signed-off-by: Lothar Waßmann Acked-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/imx-drm/ipuv3-crtc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c index 1892006526b5..4b3a019409b5 100644 --- a/drivers/staging/imx-drm/ipuv3-crtc.c +++ b/drivers/staging/imx-drm/ipuv3-crtc.c @@ -452,7 +452,7 @@ static int ipu_get_resources(struct ipu_crtc *ipu_crtc, int ret; ipu_crtc->ipu_ch = ipu_idmac_get(ipu, pdata->dma[0]); - if (IS_ERR_OR_NULL(ipu_crtc->ipu_ch)) { + if (IS_ERR(ipu_crtc->ipu_ch)) { ret = PTR_ERR(ipu_crtc->ipu_ch); goto err_out; } @@ -472,7 +472,7 @@ static int ipu_get_resources(struct ipu_crtc *ipu_crtc, if (pdata->dp >= 0) { ipu_crtc->dp = ipu_dp_get(ipu, pdata->dp); if (IS_ERR(ipu_crtc->dp)) { - ret = PTR_ERR(ipu_crtc->ipu_ch); + ret = PTR_ERR(ipu_crtc->dp); goto err_out; } } @@ -548,6 +548,8 @@ static int ipu_drm_probe(struct platform_device *pdev) ipu_crtc->dev = &pdev->dev; ret = ipu_crtc_init(ipu_crtc, pdata); + if (ret) + return ret; platform_set_drvdata(pdev, ipu_crtc); From efe57d5977fa62b8fdf3a38c236d1aa5351228be Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Tue, 25 Dec 2012 15:58:39 +0100 Subject: [PATCH 140/553] staging: drm/imx: fix double free bug in error path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit kfree(imx_drm_encoder) is already being called at the label 'err_register'. Signed-off-by: Lothar Waßmann Acked-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/imx-drm/imx-drm-core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c index ecf0f44bc70e..cec19f1cf56c 100644 --- a/drivers/staging/imx-drm/imx-drm-core.c +++ b/drivers/staging/imx-drm/imx-drm-core.c @@ -584,7 +584,6 @@ int imx_drm_add_encoder(struct drm_encoder *encoder, ret = imx_drm_encoder_register(imx_drm_encoder); if (ret) { - kfree(imx_drm_encoder); ret = -ENOMEM; goto err_register; } From 0d826c3919ceede3c6afc3e87fc7087e0c863e7e Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 26 Dec 2012 20:51:13 -0600 Subject: [PATCH 141/553] staging: rtl8187se: Fix failure to check pci_map_single() Beginning with kernel 3.8, the DMA mapping routines issue a warning for the first call to pci_map_single() that is not checked with a pci_dma_mapping_error() call. Signed-off-by: Larry Finger Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/r8180_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index ae38475854b5..d10d75e8a33f 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -937,7 +937,8 @@ short alloc_rx_desc_ring(struct net_device *dev, u16 bufsize, int count) dma_tmp = pci_map_single(pdev, buf, bufsize * sizeof(u8), PCI_DMA_FROMDEVICE); - + if (pci_dma_mapping_error(pdev, dma_tmp)) + return -1; if (-1 == buffer_add(&(priv->rxbuffer), buf, dma_tmp, &(priv->rxbufferhead))) { DMESGE("Unable to allocate mem RX buf"); From 2dcb4a298cd9ffdd5b53437430863c80a868dc90 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 26 Dec 2012 20:51:12 -0600 Subject: [PATCH 142/553] staging: rtl8192e: Fix failure to check pci_map_single() Beginning with kernel 3.8, the DMA mapping routines issue a warning for the first call to pci_map_single() that is not checked with a pci_dma_mapping_error() call. Signed-off-by: Larry Finger Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 4 ++++ drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 11 +++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c index 808aab6fa5ef..a9d78e9651c6 100644 --- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c @@ -1183,6 +1183,8 @@ void rtl8192_tx_fill_desc(struct net_device *dev, struct tx_desc *pdesc, pTxFwInfo->TxRate, cb_desc); + if (pci_dma_mapping_error(priv->pdev, mapping)) + RT_TRACE(COMP_ERR, "DMA Mapping error\n");; if (cb_desc->bAMPDUEnable) { pTxFwInfo->AllowAggregation = 1; pTxFwInfo->RxMF = cb_desc->ampdu_factor; @@ -1280,6 +1282,8 @@ void rtl8192_tx_fill_cmd_desc(struct net_device *dev, dma_addr_t mapping = pci_map_single(priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(priv->pdev, mapping)) + RT_TRACE(COMP_ERR, "DMA Mapping error\n");; memset(entry, 0, 12); entry->LINIP = cb_desc->bLastIniPkt; entry->FirstSeg = 1; diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c index 1a70f324552f..4ebf99b30975 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c @@ -2104,7 +2104,10 @@ static short rtl8192_alloc_rx_desc_ring(struct net_device *dev) skb_tail_pointer_rsl(skb), priv->rxbuffersize, PCI_DMA_FROMDEVICE); - + if (pci_dma_mapping_error(priv->pdev, *mapping)) { + dev_kfree_skb_any(skb); + return -1; + } entry->BufferAddress = cpu_to_le32(*mapping); entry->Length = priv->rxbuffersize; @@ -2397,7 +2400,11 @@ static void rtl8192_rx_normal(struct net_device *dev) skb_tail_pointer_rsl(skb), priv->rxbuffersize, PCI_DMA_FROMDEVICE); - + if (pci_dma_mapping_error(priv->pdev, + *((dma_addr_t *)skb->cb))) { + dev_kfree_skb_any(skb); + return; + } } done: pdesc->BufferAddress = cpu_to_le32(*((dma_addr_t *)skb->cb)); From ae428655b826f2755a8101b27beda42a275ef8ad Mon Sep 17 00:00:00 2001 From: Nickolai Zeldovich Date: Sat, 5 Jan 2013 14:17:45 -0500 Subject: [PATCH 143/553] staging: speakup: avoid out-of-range access in synth_init() Check that array index is in-bounds before accessing the synths[] array. Signed-off-by: Nickolai Zeldovich Cc: stable Cc: Samuel Thibault Signed-off-by: Greg Kroah-Hartman --- drivers/staging/speakup/synth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/speakup/synth.c b/drivers/staging/speakup/synth.c index df9533798095..b91d22b6330f 100644 --- a/drivers/staging/speakup/synth.c +++ b/drivers/staging/speakup/synth.c @@ -342,7 +342,7 @@ int synth_init(char *synth_name) mutex_lock(&spk_mutex); /* First, check if we already have it loaded. */ - for (i = 0; synths[i] != NULL && i < MAXSYNTHS; i++) + for (i = 0; i < MAXSYNTHS && synths[i] != NULL; i++) if (strcmp(synths[i]->name, synth_name) == 0) synth = synths[i]; From 6102c48bd421074a33e102f2ebda3724e8d275f9 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Mon, 7 Jan 2013 22:03:51 +0100 Subject: [PATCH 144/553] staging: speakup: avoid out-of-range access in synth_add() Check that array index is in-bounds before accessing the synths[] array. Signed-off-by: Samuel Thibault Cc: stable Cc: Nickolai Zeldovich Signed-off-by: Greg Kroah-Hartman --- drivers/staging/speakup/synth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/speakup/synth.c b/drivers/staging/speakup/synth.c index b91d22b6330f..7616f058a00b 100644 --- a/drivers/staging/speakup/synth.c +++ b/drivers/staging/speakup/synth.c @@ -423,7 +423,7 @@ int synth_add(struct spk_synth *in_synth) int i; int status = 0; mutex_lock(&spk_mutex); - for (i = 0; synths[i] != NULL && i < MAXSYNTHS; i++) + for (i = 0; i < MAXSYNTHS && synths[i] != NULL; i++) /* synth_remove() is responsible for rotating the array down */ if (in_synth == synths[i]) { mutex_unlock(&spk_mutex); From 9349f8af28ea89639b3c97da583d60631ed10398 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Fri, 14 Dec 2012 15:02:44 +0400 Subject: [PATCH 145/553] staging: vme_pio2: fix oops on module unloading This patch forbids loading vme_pio2 module without specifing "num_bus" parameter. Otherwise on module unloading pio2_exit() calls vme_unregister_driver() for not registered pio2_driver. Signed-off-by: Konstantin Khlebnikov Cc: Manohar Vanga Acked-by: Martyn Welch Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vme/devices/vme_pio2_core.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/drivers/staging/vme/devices/vme_pio2_core.c b/drivers/staging/vme/devices/vme_pio2_core.c index 0331178ca3b3..bf73ba26e88a 100644 --- a/drivers/staging/vme/devices/vme_pio2_core.c +++ b/drivers/staging/vme/devices/vme_pio2_core.c @@ -162,11 +162,9 @@ static struct vme_driver pio2_driver = { static int __init pio2_init(void) { - int retval = 0; - if (bus_num == 0) { pr_err("No cards, skipping registration\n"); - goto err_nocard; + return -ENODEV; } if (bus_num > PIO2_CARDS_MAX) { @@ -176,15 +174,7 @@ static int __init pio2_init(void) } /* Register the PIO2 driver */ - retval = vme_register_driver(&pio2_driver, bus_num); - if (retval != 0) - goto err_reg; - - return retval; - -err_reg: -err_nocard: - return retval; + return vme_register_driver(&pio2_driver, bus_num); } static int pio2_match(struct vme_dev *vdev) From cabd91c3bb74a5bc43c3192126af752891d11d77 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Sun, 1 Apr 2012 12:57:18 -0400 Subject: [PATCH 146/553] parisc: avoid undefined shift in cnv_float.h The attached change fixes a float conversion problem found running the GCC testsuite with GCC configured with --with-arch=2.0. The actual problem occurs for an exponent value of 63. This is the maximum exponent value that can be passed. This causes a left shift by 32 in the else hunk of the macro. This causes undefined behavior and the wrong value is returned for dresultB. The fix is the check "exponent <= 62". If the exponent is 63, dresultB is set to 0. The patch also optimizes the operation a bit by copying "Sall(sgl_value) << SGL_EXP_LENGTH" to val, so that sgl_value is not modified. Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/math-emu/cnv_float.h | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/parisc/math-emu/cnv_float.h b/arch/parisc/math-emu/cnv_float.h index 9071e093164a..933423fa5144 100644 --- a/arch/parisc/math-emu/cnv_float.h +++ b/arch/parisc/math-emu/cnv_float.h @@ -347,16 +347,15 @@ Sgl_isinexact_to_fix(sgl_value,exponent) #define Duint_from_sgl_mantissa(sgl_value,exponent,dresultA,dresultB) \ - {Sall(sgl_value) <<= SGL_EXP_LENGTH; /* left-justify */ \ + {unsigned int val = Sall(sgl_value) << SGL_EXP_LENGTH; \ if (exponent <= 31) { \ - Dintp1(dresultA) = 0; \ - Dintp2(dresultB) = (unsigned)Sall(sgl_value) >> (31 - exponent); \ + Dintp1(dresultA) = 0; \ + Dintp2(dresultB) = val >> (31 - exponent); \ } \ else { \ - Dintp1(dresultA) = Sall(sgl_value) >> (63 - exponent); \ - Dintp2(dresultB) = Sall(sgl_value) << (exponent - 31); \ + Dintp1(dresultA) = val >> (63 - exponent); \ + Dintp2(dresultB) = exponent <= 62 ? val << (exponent - 31) : 0; \ } \ - Sall(sgl_value) >>= SGL_EXP_LENGTH; /* return to original */ \ } #define Duint_setzero(dresultA,dresultB) \ From cac1f12b9f7409510a5abcf3eaecc2c56b75242a Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Sun, 12 Jun 2011 01:46:41 +0000 Subject: [PATCH 147/553] parisc: don't claim cpu irqs more than once The CPU irqs (timer and IPI) are not shared and only need to be claimed once. A mismatch error occurs if they are claimed more than once. Signed-off-by: John David Anglin Cc: Kyle McMartin Cc: Helge Deller Cc: "James E.J. Bottomley" Signed-off-by: Helge Deller --- arch/parisc/kernel/irq.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index c0b1affc06a8..0299d63cd112 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -410,11 +410,13 @@ void __init init_IRQ(void) { local_irq_disable(); /* PARANOID - should already be disabled */ mtctl(~0UL, 23); /* EIRR : clear all pending external intr */ - claim_cpu_irqs(); #ifdef CONFIG_SMP - if (!cpu_eiem) + if (!cpu_eiem) { + claim_cpu_irqs(); cpu_eiem = EIEM_MASK(IPI_IRQ) | EIEM_MASK(TIMER_IRQ); + } #else + claim_cpu_irqs(); cpu_eiem = EIEM_MASK(TIMER_IRQ); #endif set_eiem(cpu_eiem); /* EIEM : enable all external intr */ From 34360f080cb5848990576e1465d2d01a3c261762 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Fri, 28 Dec 2012 23:18:01 +0000 Subject: [PATCH 148/553] parisc: improve ptrace support for gdb single-step Various GCC tests use gdb to simulate a multithreaded application. Many of these tests have been failing on parisc linux. GCC does this by using gdb to single-step the application, then gdb is used to call other test specific code. Where this fails is when the application is stepped into the delay slot of a taken branch. This sets the PSW B bit. When the test specific code is executed, this usually clears the PSW B bit. Currently, gdb is not allowed to set the B bit. So, the code falls through what should be a taken branch. The attached patch adds the PSW B bit to the set of bits that gdb is allowed to set. In order to set the B bit, the trace system call must return using an interrupt restore. The patch also modifies this code to use the saved IAOQ values when they are saved by a ptrace syscall or interruption. Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/kernel/entry.S | 20 ++++++++++++++------ arch/parisc/kernel/ptrace.c | 2 +- 2 files changed, 15 insertions(+), 7 deletions(-) diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index bfb44247d7a7..eb7850b46c25 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -1865,7 +1865,7 @@ syscall_restore: /* Are we being ptraced? */ ldw TASK_FLAGS(%r1),%r19 - ldi (_TIF_SINGLESTEP|_TIF_BLOCKSTEP),%r2 + ldi _TIF_SYSCALL_TRACE_MASK,%r2 and,COND(=) %r19,%r2,%r0 b,n syscall_restore_rfi @@ -1978,15 +1978,23 @@ syscall_restore_rfi: /* sr2 should be set to zero for userspace syscalls */ STREG %r0,TASK_PT_SR2(%r1) -pt_regs_ok: LDREG TASK_PT_GR31(%r1),%r2 - depi 3,31,2,%r2 /* ensure return to user mode. */ - STREG %r2,TASK_PT_IAOQ0(%r1) + depi 3,31,2,%r2 /* ensure return to user mode. */ + STREG %r2,TASK_PT_IAOQ0(%r1) ldo 4(%r2),%r2 STREG %r2,TASK_PT_IAOQ1(%r1) - copy %r25,%r16 b intr_restore - nop + copy %r25,%r16 + +pt_regs_ok: + LDREG TASK_PT_IAOQ0(%r1),%r2 + depi 3,31,2,%r2 /* ensure return to user mode. */ + STREG %r2,TASK_PT_IAOQ0(%r1) + LDREG TASK_PT_IAOQ1(%r1),%r2 + depi 3,31,2,%r2 + STREG %r2,TASK_PT_IAOQ1(%r1) + b intr_restore + copy %r25,%r16 .import schedule,code syscall_do_resched: diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c index 857c2f545470..534abd4936e1 100644 --- a/arch/parisc/kernel/ptrace.c +++ b/arch/parisc/kernel/ptrace.c @@ -26,7 +26,7 @@ #include /* PSW bits we allow the debugger to modify */ -#define USER_PSW_BITS (PSW_N | PSW_V | PSW_CB) +#define USER_PSW_BITS (PSW_N | PSW_B | PSW_V | PSW_CB) /* * Called by kernel/ptrace.c when detaching.. From ad30f3ff3deb4037f2beea15812d01d795f8b3cc Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Sun, 25 Nov 2012 21:39:00 +0000 Subject: [PATCH 149/553] parisc: sigaltstack doesn't round ss.ss_sp as required On 24-Nov-12, at 10:05 AM, John David Anglin wrote: > In trying to build the debian libsigsegv2 package, I found that sigaltstack > doesn't round ss.ss_sp. The tests intentionally pass an unaligned pointer. > This results in the two stack overflow tests failing. The attached patch fixes this issue. Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/kernel/signal.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 537996955998..fd051705a407 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -190,8 +190,10 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) DBG(1,"get_sigframe: ka = %#lx, sp = %#lx, frame_size = %#lx\n", (unsigned long)ka, sp, frame_size); + /* Align alternate stack and reserve 64 bytes for the signal + handler's frame marker. */ if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp)) - sp = current->sas_ss_sp; /* Stacks grow up! */ + sp = (current->sas_ss_sp + 0x7f) & ~0x3f; /* Stacks grow up! */ DBG(1,"get_sigframe: Returning sp = %#lx\n", (unsigned long)sp); return (void __user *) sp; /* Stacks grow up. Fun. */ From 34b55d8c48f4f76044d8f4d6ec3dc786cf210312 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=89ric=20Piel?= Date: Wed, 19 Dec 2012 13:03:13 +0100 Subject: [PATCH 150/553] staging: comedi: fix minimum AO period for NI 625x and NI 628x MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The minimum period was set to 357 ns, while the divider for these boards is 50 ns. This prevented to output at maximum speed as ni_ao_cmdtest() would return 357 but would not accept it. Not sure why it was set to 357 ns (this was done before the git history, which starts 5 years ago). My guess is that it comes from reading the specification stating a 2.8 MHz rate (~ 357 ns). The latest specification states a 2.86 MHz rate (~ 350 ns), which makes a lot more sense. Tested on a pci-6251. Signed-off-by: Éric Piel Acked-By: Ian Abbott Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_pcimio.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c index aaac0b2cc9eb..fd1662b4175d 100644 --- a/drivers/staging/comedi/drivers/ni_pcimio.c +++ b/drivers/staging/comedi/drivers/ni_pcimio.c @@ -963,7 +963,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_625x_ao, .reg_type = ni_reg_625x, .ao_unipolar = 0, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 8, .caldac = {caldac_none}, .has_8255 = 0, @@ -982,7 +982,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_625x_ao, .reg_type = ni_reg_625x, .ao_unipolar = 0, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 8, .caldac = {caldac_none}, .has_8255 = 0, @@ -1001,7 +1001,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_625x_ao, .reg_type = ni_reg_625x, .ao_unipolar = 0, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 8, .caldac = {caldac_none}, .has_8255 = 0, @@ -1037,7 +1037,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_625x_ao, .reg_type = ni_reg_625x, .ao_unipolar = 0, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 32, .caldac = {caldac_none}, .has_8255 = 0, @@ -1056,7 +1056,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_625x_ao, .reg_type = ni_reg_625x, .ao_unipolar = 0, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 32, .caldac = {caldac_none}, .has_8255 = 0, @@ -1092,7 +1092,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_628x_ao, .reg_type = ni_reg_628x, .ao_unipolar = 1, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 8, .caldac = {caldac_none}, .has_8255 = 0, @@ -1111,7 +1111,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_628x_ao, .reg_type = ni_reg_628x, .ao_unipolar = 1, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 8, .caldac = {caldac_none}, .has_8255 = 0, @@ -1147,7 +1147,7 @@ static const struct ni_board_struct ni_boards[] = { .ao_range_table = &range_ni_M_628x_ao, .reg_type = ni_reg_628x, .ao_unipolar = 1, - .ao_speed = 357, + .ao_speed = 350, .num_p0_dio_channels = 32, .caldac = {caldac_none}, .has_8255 = 0, From 7d3135af399e92cf4c9bbc5f86b6c140aab3b88c Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Tue, 4 Dec 2012 15:59:55 +0000 Subject: [PATCH 151/553] staging: comedi: prevent auto-unconfig of manually configured devices When a low-level comedi driver auto-configures a device, a `struct comedi_dev_file_info` is allocated (as well as a `struct comedi_device`) by `comedi_alloc_board_minor()`. A pointer to the hardware `struct device` is stored as a cookie in the `struct comedi_dev_file_info`. When the low-level comedi driver auto-unconfigures the device, `comedi_auto_unconfig()` uses the cookie to find the `struct comedi_dev_file_info` so it can detach the comedi device from the driver, clean it up and free it. A problem arises if the user manually unconfigures and reconfigures the comedi device using the `COMEDI_DEVCONFIG` ioctl so that is no longer associated with the original hardware device. The problem is that the cookie is not cleared, so that a call to `comedi_auto_unconfig()` from the low-level driver will still find it, detach it, clean it up and free it. Stop this problem occurring by always clearing the `hardware_device` cookie in the `struct comedi_dev_file_info` whenever the `COMEDI_DEVCONFIG` ioctl call is successful. Signed-off-by: Ian Abbott Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_fops.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index b7bba1790a20..9b038e4a7e71 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -1549,6 +1549,9 @@ static long comedi_unlocked_ioctl(struct file *file, unsigned int cmd, if (cmd == COMEDI_DEVCONFIG) { rc = do_devconfig_ioctl(dev, (struct comedi_devconfig __user *)arg); + if (rc == 0) + /* Evade comedi_auto_unconfig(). */ + dev_file_info->hardware_device = NULL; goto done; } From 34ffb33e09132401872fe79e95c30824ce194d23 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Thu, 3 Jan 2013 12:15:26 +0000 Subject: [PATCH 152/553] staging: comedi: Kconfig: COMEDI_NI_AT_A2150 should select COMEDI_FC The 'ni_at_a2150' module links to `cfc_write_to_buffer` in the 'comedi_fc' module, so selecting 'COMEDI_NI_AT_A2150' in the kernel config needs to also select 'COMEDI_FC'. Signed-off-by: Ian Abbott Cc: stable # 3.6+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index 7de2a10213bd..36eec320569c 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -444,6 +444,7 @@ config COMEDI_ADQ12B config COMEDI_NI_AT_A2150 tristate "NI AT-A2150 ISA card support" + select COMEDI_FC depends on VIRT_TO_BUS ---help--- Enable support for National Instruments AT-A2150 cards From c0729eeefdcd76db338f635162bf0739fd2c5f6f Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 4 Jan 2013 11:33:21 +0000 Subject: [PATCH 153/553] staging: comedi: comedi_test: fix race when cancelling command MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Éric Piel reported a kernel oops in the "comedi_test" module. It was a NULL pointer dereference within `waveform_ai_interrupt()` (actually a timer function) that sometimes occurred when a running asynchronous command is cancelled (either by the `COMEDI_CANCEL` ioctl or by closing the device file). This seems to be a race between the caller of `waveform_ai_cancel()` which on return from that function goes and tears down the running command, and the timer function which uses the command. In particular, `async->cmd.chanlist` gets freed (and the pointer set to NULL) by `do_become_nonbusy()` in "comedi_fops.c" but a previously scheduled `waveform_ai_interrupt()` timer function will dereference that pointer regardless, leading to the oops. Fix it by replacing the `del_timer()` call in `waveform_ai_cancel()` with `del_timer_sync()`. Signed-off-by: Ian Abbott Reported-by: Éric Piel Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/comedi_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/comedi_test.c b/drivers/staging/comedi/drivers/comedi_test.c index fb3d09323ba1..01de996239f1 100644 --- a/drivers/staging/comedi/drivers/comedi_test.c +++ b/drivers/staging/comedi/drivers/comedi_test.c @@ -345,7 +345,7 @@ static int waveform_ai_cancel(struct comedi_device *dev, struct waveform_private *devpriv = dev->private; devpriv->timer_running = 0; - del_timer(&devpriv->timer); + del_timer_sync(&devpriv->timer); return 0; } From fe02508529a937faa7f978d10c7d0565f3879cb0 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Wed, 19 Dec 2012 10:48:46 +0100 Subject: [PATCH 154/553] staging: tidspbridge: Fix build breakage due to splitting CM functions. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit ff4ae5d (ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files) resulted in a build breakage for tidspbridge driver. ... CC [M] drivers/staging/tidspbridge/core/tiomap3430.o staging/tidspbridge/core/tiomap3430.c: In function ‘bridge_brd_start’: staging/tidspbridge/core/tiomap3430.c:550:24: error: ‘OMAP3430_CM_AUTOIDLE_PLL’ undeclared (first use in this function) make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430.o] Error 1 ... Fix this by including the appropriate header file. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/core/_tiomap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/tidspbridge/core/_tiomap.h b/drivers/staging/tidspbridge/core/_tiomap.h index 543a127c7d4d..b783bfa59b1c 100644 --- a/drivers/staging/tidspbridge/core/_tiomap.h +++ b/drivers/staging/tidspbridge/core/_tiomap.h @@ -31,7 +31,7 @@ * driver should read or write to PRM/CM registers directly; they * should rely on OMAP core code to do this. */ -#include +#include #include #include #include From e16a922a27ec352537a8027cadc32dc156534ca5 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Mon, 24 Dec 2012 08:10:25 -0600 Subject: [PATCH 155/553] staging: tidspbridge: use prepare/unprepare on dsp clocks This solves runtime failures while trying to enable WDT3 related functionality on firmware load, however it does affect other clocks controlled by the driver. Seen on 3.8-rc1. CCF provides clk_prepare and clk_unprepare for enable and disable operations respectively, this needs to be called in the correct order while handling clocks. Code path to enable/disable dsp clocks can still be reached from an atomic context, hence we can't use clk_prepare_enable and clk_disable_unprepare yet. Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/core/dsp-clock.c | 13 ++++++++++++- drivers/staging/tidspbridge/core/wdt.c | 12 ++++++++++-- 2 files changed, 22 insertions(+), 3 deletions(-) diff --git a/drivers/staging/tidspbridge/core/dsp-clock.c b/drivers/staging/tidspbridge/core/dsp-clock.c index b647207928b1..2f084e181d39 100644 --- a/drivers/staging/tidspbridge/core/dsp-clock.c +++ b/drivers/staging/tidspbridge/core/dsp-clock.c @@ -121,9 +121,13 @@ void dsp_clk_exit(void) for (i = 0; i < DM_TIMER_CLOCKS; i++) omap_dm_timer_free(timer[i]); + clk_unprepare(iva2_clk); clk_put(iva2_clk); + clk_unprepare(ssi.sst_fck); clk_put(ssi.sst_fck); + clk_unprepare(ssi.ssr_fck); clk_put(ssi.ssr_fck); + clk_unprepare(ssi.ick); clk_put(ssi.ick); } @@ -145,14 +149,21 @@ void dsp_clk_init(void) iva2_clk = clk_get(&dspbridge_device.dev, "iva2_ck"); if (IS_ERR(iva2_clk)) dev_err(bridge, "failed to get iva2 clock %p\n", iva2_clk); + else + clk_prepare(iva2_clk); ssi.sst_fck = clk_get(&dspbridge_device.dev, "ssi_sst_fck"); ssi.ssr_fck = clk_get(&dspbridge_device.dev, "ssi_ssr_fck"); ssi.ick = clk_get(&dspbridge_device.dev, "ssi_ick"); - if (IS_ERR(ssi.sst_fck) || IS_ERR(ssi.ssr_fck) || IS_ERR(ssi.ick)) + if (IS_ERR(ssi.sst_fck) || IS_ERR(ssi.ssr_fck) || IS_ERR(ssi.ick)) { dev_err(bridge, "failed to get ssi: sst %p, ssr %p, ick %p\n", ssi.sst_fck, ssi.ssr_fck, ssi.ick); + } else { + clk_prepare(ssi.sst_fck); + clk_prepare(ssi.ssr_fck); + clk_prepare(ssi.ick); + } } /** diff --git a/drivers/staging/tidspbridge/core/wdt.c b/drivers/staging/tidspbridge/core/wdt.c index 1dce36fb828f..7ff0e6c98039 100644 --- a/drivers/staging/tidspbridge/core/wdt.c +++ b/drivers/staging/tidspbridge/core/wdt.c @@ -63,11 +63,15 @@ int dsp_wdt_init(void) dsp_wdt.fclk = clk_get(NULL, "wdt3_fck"); if (!IS_ERR(dsp_wdt.fclk)) { + clk_prepare(dsp_wdt.fclk); + dsp_wdt.iclk = clk_get(NULL, "wdt3_ick"); if (IS_ERR(dsp_wdt.iclk)) { clk_put(dsp_wdt.fclk); dsp_wdt.fclk = NULL; ret = -EFAULT; + } else { + clk_prepare(dsp_wdt.iclk); } } else ret = -EFAULT; @@ -95,10 +99,14 @@ void dsp_wdt_exit(void) free_irq(INT_34XX_WDT3_IRQ, &dsp_wdt); tasklet_kill(&dsp_wdt.wdt3_tasklet); - if (dsp_wdt.fclk) + if (dsp_wdt.fclk) { + clk_unprepare(dsp_wdt.fclk); clk_put(dsp_wdt.fclk); - if (dsp_wdt.iclk) + } + if (dsp_wdt.iclk) { + clk_unprepare(dsp_wdt.iclk); clk_put(dsp_wdt.iclk); + } dsp_wdt.fclk = NULL; dsp_wdt.iclk = NULL; From e909c682d04e55e77a3c9d158e7dc36027195493 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 7 Jan 2013 10:57:14 +0100 Subject: [PATCH 156/553] [media] coda: Fix build due to iram.h rename commit c045e3f13 (ARM: imx: include iram.h rather than mach/iram.h) changed the location of iram.h, which causes the following build error when building the coda driver: drivers/media/platform/coda.c:27:23: error: mach/iram.h: No such file or directory drivers/media/platform/coda.c: In function 'coda_probe': drivers/media/platform/coda.c:2000: error: implicit declaration of function 'iram_alloc' drivers/media/platform/coda.c:2001: warning: assignment makes pointer from integer without a cast drivers/media/platform/coda.c: In function 'coda_remove': drivers/media/platform/coda.c:2024: error: implicit declaration of function 'iram_free' Since the content of iram.h is not imx specific, move it to include/linux/platform_data/imx-iram.h instead. This is an intermediate solution until the i.MX iram allocator is converted to the generic SRAM allocator. Signed-off-by: Sascha Hauer Acked-by: Mauro Carvalho Chehab --- arch/arm/mach-imx/iram_alloc.c | 3 +-- drivers/media/platform/coda.c | 2 +- .../mach-imx/iram.h => include/linux/platform_data/imx-iram.h | 0 3 files changed, 2 insertions(+), 3 deletions(-) rename arch/arm/mach-imx/iram.h => include/linux/platform_data/imx-iram.h (100%) diff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c index 6c80424f678e..e05cf407db65 100644 --- a/arch/arm/mach-imx/iram_alloc.c +++ b/arch/arm/mach-imx/iram_alloc.c @@ -22,8 +22,7 @@ #include #include #include - -#include "iram.h" +#include "linux/platform_data/imx-iram.h" static unsigned long iram_phys_base; static void __iomem *iram_virt_base; diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c index 7b8b547f2d51..afadd3aba3e0 100644 --- a/drivers/media/platform/coda.c +++ b/drivers/media/platform/coda.c @@ -23,8 +23,8 @@ #include #include #include +#include -#include #include #include #include diff --git a/arch/arm/mach-imx/iram.h b/include/linux/platform_data/imx-iram.h similarity index 100% rename from arch/arm/mach-imx/iram.h rename to include/linux/platform_data/imx-iram.h From 5a334c082fc91f0c342ba9c111b77cafb5266654 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Thu, 20 Dec 2012 17:30:52 +0100 Subject: [PATCH 157/553] s390/debug: Fix s390dbf lockdep problem in debug_(un)register_view() The debug_register/unregister_view() functions call debugfs_remove() while holding the debug_info spinlock. Because debugfs_remove() takes a mutex and therefore can sleep this is not allowed. To fix the problem we give up the debug_info lock before calling debugfs_remove(). The following shows the lockdep message: [ INFO: possible circular locking dependency detected ] ------------------------------------------------------- rmmod/4379 is trying to acquire lock: (&sb->s_type->i_mutex_key#2){+.+.+.}, at: [<00000000003acae2>] debugfs_remove+0x5e/0xa but task is already holding lock: (&(&rc->lock)->rlock){-.-...}, at: [<000000000010a5ae>] debug_unregister_view+0x3a/0xd which lock already depends on the new lock. -> #0 (&sb->s_type->i_mutex_key#2){+.+.+.}: [<00000000001b1644>] validate_chain+0x880/0x1154 [<00000000001b4d6c>] __lock_acquire+0x414/0xc44 [<00000000001b5c16>] lock_acquire+0xbe/0x178 [<0000000000614016>] mutex_lock_nested+0x66/0x36c [<00000000003acae2>] debugfs_remove+0x5e/0xac [<000000000010a620>] debug_unregister_view+0xac/0xd0 [<000003ff8002f140>] qeth_core_exit+0x48/0xf08 [qeth] [<00000000001c35a4>] SyS_delete_module+0x1a4/0x260 [<0000000000618134>] sysc_noemu+0x22/0x28 [<000003fffd4704da>] 0x3fffd4704da Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/debug.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index ba500d8dc392..4e8215e0d4b6 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -1127,13 +1127,14 @@ debug_register_view(debug_info_t * id, struct debug_view *view) if (i == DEBUG_MAX_VIEWS) { pr_err("Registering view %s/%s would exceed the maximum " "number of views %i\n", id->name, view->name, i); - debugfs_remove(pde); rc = -1; } else { id->views[i] = view; id->debugfs_entries[i] = pde; } spin_unlock_irqrestore(&id->lock, flags); + if (rc) + debugfs_remove(pde); out: return rc; } @@ -1146,9 +1147,9 @@ EXPORT_SYMBOL(debug_register_view); int debug_unregister_view(debug_info_t * id, struct debug_view *view) { - int rc = 0; - int i; + struct dentry *dentry = NULL; unsigned long flags; + int i, rc = 0; if (!id) goto out; @@ -1160,10 +1161,12 @@ debug_unregister_view(debug_info_t * id, struct debug_view *view) if (i == DEBUG_MAX_VIEWS) rc = -1; else { - debugfs_remove(id->debugfs_entries[i]); + dentry = id->debugfs_entries[i]; id->views[i] = NULL; + id->debugfs_entries[i] = NULL; } spin_unlock_irqrestore(&id->lock, flags); + debugfs_remove(dentry); out: return rc; } From eba61970b68f9f7680d6c1c269633dcd005b3bd2 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 27 Dec 2012 14:03:36 +0100 Subject: [PATCH 158/553] s390/smp: fix section mismatch for smp_add_present_cpu() Fixes this section mismatch: WARNING: vmlinux.o(.text+0x145e4): Section mismatch in reference from the function smp_add_present_cpu() to the function .cpuinit.text:register_cpu() The function smp_add_present_cpu() references the function __cpuinit register_cpu(). This is often because smp_add_present_cpu lacks a __cpuinit annotation or the annotation of register_cpu is wrong. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/smp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 0b45baa55438..82664a3c17ee 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -623,9 +623,10 @@ static struct sclp_cpu_info *smp_get_cpu_info(void) return info; } -static int smp_add_present_cpu(int cpu); +static int __cpuinit smp_add_present_cpu(int cpu); -static int __smp_rescan_cpus(struct sclp_cpu_info *info, int sysfs_add) +static int __cpuinit __smp_rescan_cpus(struct sclp_cpu_info *info, + int sysfs_add) { struct pcpu *pcpu; cpumask_t avail; @@ -985,7 +986,7 @@ static int __cpuinit smp_cpu_notify(struct notifier_block *self, return notifier_from_errno(err); } -static int smp_add_present_cpu(int cpu) +static int __cpuinit smp_add_present_cpu(int cpu) { struct cpu *c = &pcpu_devices[cpu].cpu; struct device *s = &c->dev; From b2034e1934c4596ecbad798d0db0fb60c7f5628b Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 28 Dec 2012 13:15:36 +0100 Subject: [PATCH 159/553] s390/pci: remove dead code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Get rid of these: arch/s390/pci/pci_dma.c:16:29: warning: ‘zpci_ioat_dt’ defined but not used [-Wunused-variable] arch/s390/pci/pci.c:164:12: warning: ‘zpci_store_fib’ defined but not used [-Wunused-function] Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/pci/pci.c | 29 ----------------------------- arch/s390/pci/pci_dma.c | 2 -- 2 files changed, 31 deletions(-) diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c index ff49427e9941..e985744f6334 100644 --- a/arch/s390/pci/pci.c +++ b/arch/s390/pci/pci.c @@ -160,35 +160,6 @@ int pci_proc_domain(struct pci_bus *bus) } EXPORT_SYMBOL_GPL(pci_proc_domain); -/* Store PCI function information block */ -static int zpci_store_fib(struct zpci_dev *zdev, u8 *fc) -{ - struct zpci_fib *fib; - u8 status, cc; - - fib = (void *) get_zeroed_page(GFP_KERNEL); - if (!fib) - return -ENOMEM; - - do { - cc = __stpcifc(zdev->fh, 0, fib, &status); - if (cc == 2) { - msleep(ZPCI_INSN_BUSY_DELAY); - memset(fib, 0, PAGE_SIZE); - } - } while (cc == 2); - - if (cc) - pr_err_once("%s: cc: %u status: %u\n", - __func__, cc, status); - - /* Return PCI function controls */ - *fc = fib->fc; - - free_page((unsigned long) fib); - return (cc) ? -EIO : 0; -} - /* Modify PCI: Register adapter interruptions */ static int zpci_register_airq(struct zpci_dev *zdev, unsigned int aisb, u64 aibv) diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c index 6138468b420f..a547419907c3 100644 --- a/arch/s390/pci/pci_dma.c +++ b/arch/s390/pci/pci_dma.c @@ -13,8 +13,6 @@ #include #include -static enum zpci_ioat_dtype zpci_ioat_dt = ZPCI_IOTA_RTTO; - static struct kmem_cache *dma_region_table_cache; static struct kmem_cache *dma_page_table_cache; From 1427add02c90d60692e12ad88ade1e86c7444b38 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 27 Dec 2012 13:03:15 +0100 Subject: [PATCH 160/553] s390/syscalls: wire up finit_module syscall Signed-off-by: Heiko Carstens --- arch/s390/include/uapi/asm/unistd.h | 3 ++- arch/s390/kernel/compat_wrapper.S | 6 ++++++ arch/s390/kernel/syscalls.S | 1 + 3 files changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/s390/include/uapi/asm/unistd.h b/arch/s390/include/uapi/asm/unistd.h index 63e6078699f1..864f693c237f 100644 --- a/arch/s390/include/uapi/asm/unistd.h +++ b/arch/s390/include/uapi/asm/unistd.h @@ -279,7 +279,8 @@ #define __NR_process_vm_writev 341 #define __NR_s390_runtime_instr 342 #define __NR_kcmp 343 -#define NR_syscalls 344 +#define __NR_finit_module 344 +#define NR_syscalls 345 /* * There are some system calls that are not present on 64 bit, some diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 827e094a2f49..9b9a805656b5 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1659,3 +1659,9 @@ ENTRY(sys_kcmp_wrapper) llgfr %r5,%r5 # unsigned long llgfr %r6,%r6 # unsigned long jg sys_kcmp + +ENTRY(sys_finit_module_wrapper) + lgfr %r2,%r2 # int + llgtr %r3,%r3 # const char __user * + lgfr %r4,%r4 # int + jg sys_finit_module diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index 48174850f3b0..6a6c61f94dd3 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -352,3 +352,4 @@ SYSCALL(sys_process_vm_readv,sys_process_vm_readv,compat_sys_process_vm_readv_wr SYSCALL(sys_process_vm_writev,sys_process_vm_writev,compat_sys_process_vm_writev_wrapper) SYSCALL(sys_ni_syscall,sys_s390_runtime_instr,sys_s390_runtime_instr_wrapper) SYSCALL(sys_kcmp,sys_kcmp,sys_kcmp_wrapper) +SYSCALL(sys_finit_module,sys_finit_module,sys_finit_module_wrapper) From add9bde216fefe1b65b41f7c0948cef48aa98c14 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 2 Jan 2013 14:01:23 +0100 Subject: [PATCH 161/553] s390/irq: enable irq sum accounting for /proc/stat again For more than two years, since f2c66cd8eeddedb440f33bc0f5cec1ed7ae376cb "/proc/stat: scalability of irq num per cpu" the output of /proc/stat is broken. The first field in the "intr" line should contain the sum of all interrupts, however since the above mentioned change it is always zero. The reason for that is that a per cpu irq sum variable had been introduced which got incremented when calling kstat_incr_irqs_this_cpu(). However on s390 we directly incremented only the per cpu per irq counter by accessing the array element via kstat_cpu(smp_processor_id()).irqs[...]. So fix this and use the kstat_incr_irqs_this_cpu() wrapper which increments both: the per cpu per irq counter and the per cpu irq sum counter. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/irq.c | 2 +- drivers/s390/cio/cio.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index bf24293970ce..a8f8ab027ba8 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -222,7 +222,7 @@ void __irq_entry do_extint(struct pt_regs *regs, struct ext_code ext_code, /* Serve timer interrupts first. */ clock_comparator_work(); } - kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++; + kstat_incr_irqs_this_cpu(EXTERNAL_INTERRUPT, NULL); if (ext_code.code != 0x1004) __get_cpu_var(s390_idle).nohz_delay = 1; diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 8e927b9f285f..ebf61d5346f7 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -611,7 +611,7 @@ void __irq_entry do_IRQ(struct pt_regs *regs) tpi_info = (struct tpi_info *)&S390_lowcore.subchannel_id; irb = (struct irb *)&S390_lowcore.irb; do { - kstat_cpu(smp_processor_id()).irqs[IO_INTERRUPT]++; + kstat_incr_irqs_this_cpu(IO_INTERRUPT, NULL); if (tpi_info->adapter_IO) { do_adapter_IO(tpi_info->isc); continue; From 420f42ecf48a926ba775ec7d7294425f004b6ade Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 2 Jan 2013 15:18:18 +0100 Subject: [PATCH 162/553] s390/irq: remove split irq fields from /proc/stat Now that irq sum accounting for /proc/stat's "intr" line works again we have the oddity that the sum field (first field) contains only the sum of the second (external irqs) and third field (I/O interrupts). The reason for that is that these two fields are already sums of all other fields. So if we would sum up everything we would count every interrupt twice. This is broken since the split interrupt accounting was merged two years ago: 052ff461c8427629aee887ccc27478fc7373237c "[S390] irq: have detailed statistics for interrupt types". To fix this remove the split interrupt fields from /proc/stat's "intr" line again and only have them in /proc/interrupts. This restores the old behaviour, seems to be the only sane fix and mimics a behaviour from other architectures where /proc/interrupts also contains more than /proc/stat's "intr" line does. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/irq.h | 79 ++++++++++++-------- arch/s390/kernel/irq.c | 121 +++++++++++++++++++------------ arch/s390/kernel/nmi.c | 2 +- arch/s390/kernel/perf_cpum_cf.c | 2 +- arch/s390/kernel/runtime_instr.c | 2 +- arch/s390/kernel/smp.c | 4 +- arch/s390/kernel/time.c | 4 +- arch/s390/mm/fault.c | 2 +- arch/s390/oprofile/hwsampler.c | 2 +- arch/s390/pci/pci.c | 4 +- drivers/s390/block/dasd_diag.c | 2 +- drivers/s390/block/dasd_eckd.c | 2 +- drivers/s390/block/dasd_fba.c | 2 +- drivers/s390/char/con3215.c | 2 +- drivers/s390/char/raw3270.c | 2 +- drivers/s390/char/sclp.c | 4 +- drivers/s390/char/tape_34xx.c | 2 +- drivers/s390/char/tape_3590.c | 2 +- drivers/s390/char/vmur.c | 2 +- drivers/s390/cio/chsc_sch.c | 2 +- drivers/s390/cio/cio.c | 8 +- drivers/s390/cio/device.c | 12 +-- drivers/s390/cio/device.h | 5 +- drivers/s390/cio/eadm_sch.c | 2 +- drivers/s390/cio/qdio_thinint.c | 2 +- drivers/s390/crypto/ap_bus.c | 2 +- drivers/s390/kvm/kvm_virtio.c | 2 +- drivers/s390/net/claw.c | 2 +- drivers/s390/net/ctcm_main.c | 2 +- drivers/s390/net/lcs.c | 2 +- net/iucv/iucv.c | 2 +- 31 files changed, 163 insertions(+), 122 deletions(-) diff --git a/arch/s390/include/asm/irq.h b/arch/s390/include/asm/irq.h index e6972f85d2b0..c98dcac70ae0 100644 --- a/arch/s390/include/asm/irq.h +++ b/arch/s390/include/asm/irq.h @@ -2,43 +2,60 @@ #define _ASM_IRQ_H #include +#include +#include #include -enum interruption_class { +enum interruption_main_class { EXTERNAL_INTERRUPT, IO_INTERRUPT, - EXTINT_CLK, - EXTINT_EXC, - EXTINT_EMS, - EXTINT_TMR, - EXTINT_TLA, - EXTINT_PFL, - EXTINT_DSD, - EXTINT_VRT, - EXTINT_SCP, - EXTINT_IUC, - EXTINT_CMS, - EXTINT_CMC, - EXTINT_CMR, - IOINT_CIO, - IOINT_QAI, - IOINT_DAS, - IOINT_C15, - IOINT_C70, - IOINT_TAP, - IOINT_VMR, - IOINT_LCS, - IOINT_CLW, - IOINT_CTC, - IOINT_APB, - IOINT_ADM, - IOINT_CSC, - IOINT_PCI, - IOINT_MSI, - NMI_NMI, - NR_IRQS, + NR_IRQS }; +enum interruption_class { + IRQEXT_CLK, + IRQEXT_EXC, + IRQEXT_EMS, + IRQEXT_TMR, + IRQEXT_TLA, + IRQEXT_PFL, + IRQEXT_DSD, + IRQEXT_VRT, + IRQEXT_SCP, + IRQEXT_IUC, + IRQEXT_CMS, + IRQEXT_CMC, + IRQEXT_CMR, + IRQIO_CIO, + IRQIO_QAI, + IRQIO_DAS, + IRQIO_C15, + IRQIO_C70, + IRQIO_TAP, + IRQIO_VMR, + IRQIO_LCS, + IRQIO_CLW, + IRQIO_CTC, + IRQIO_APB, + IRQIO_ADM, + IRQIO_CSC, + IRQIO_PCI, + IRQIO_MSI, + NMI_NMI, + NR_ARCH_IRQS +}; + +struct irq_stat { + unsigned int irqs[NR_ARCH_IRQS]; +}; + +DECLARE_PER_CPU_SHARED_ALIGNED(struct irq_stat, irq_stat); + +static __always_inline void inc_irq_stat(enum interruption_class irq) +{ + __get_cpu_var(irq_stat).irqs[irq]++; +} + struct ext_code { unsigned short subcode; unsigned short code; diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index a8f8ab027ba8..5f5462447aff 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -24,42 +24,63 @@ #include #include "entry.h" +DEFINE_PER_CPU_SHARED_ALIGNED(struct irq_stat, irq_stat); +EXPORT_PER_CPU_SYMBOL_GPL(irq_stat); + struct irq_class { char *name; char *desc; }; -static const struct irq_class intrclass_names[] = { +/* + * The list of "main" irq classes on s390. This is the list of interrrupts + * that appear both in /proc/stat ("intr" line) and /proc/interrupts. + * Historically only external and I/O interrupts have been part of /proc/stat. + * We can't add the split external and I/O sub classes since the first field + * in the "intr" line in /proc/stat is supposed to be the sum of all other + * fields. + * Since the external and I/O interrupt fields are already sums we would end + * up with having a sum which accounts each interrupt twice. + */ +static const struct irq_class irqclass_main_desc[NR_IRQS] = { [EXTERNAL_INTERRUPT] = {.name = "EXT"}, - [IO_INTERRUPT] = {.name = "I/O"}, - [EXTINT_CLK] = {.name = "CLK", .desc = "[EXT] Clock Comparator"}, - [EXTINT_EXC] = {.name = "EXC", .desc = "[EXT] External Call"}, - [EXTINT_EMS] = {.name = "EMS", .desc = "[EXT] Emergency Signal"}, - [EXTINT_TMR] = {.name = "TMR", .desc = "[EXT] CPU Timer"}, - [EXTINT_TLA] = {.name = "TAL", .desc = "[EXT] Timing Alert"}, - [EXTINT_PFL] = {.name = "PFL", .desc = "[EXT] Pseudo Page Fault"}, - [EXTINT_DSD] = {.name = "DSD", .desc = "[EXT] DASD Diag"}, - [EXTINT_VRT] = {.name = "VRT", .desc = "[EXT] Virtio"}, - [EXTINT_SCP] = {.name = "SCP", .desc = "[EXT] Service Call"}, - [EXTINT_IUC] = {.name = "IUC", .desc = "[EXT] IUCV"}, - [EXTINT_CMS] = {.name = "CMS", .desc = "[EXT] CPU-Measurement: Sampling"}, - [EXTINT_CMC] = {.name = "CMC", .desc = "[EXT] CPU-Measurement: Counter"}, - [EXTINT_CMR] = {.name = "CMR", .desc = "[EXT] CPU-Measurement: RI"}, - [IOINT_CIO] = {.name = "CIO", .desc = "[I/O] Common I/O Layer Interrupt"}, - [IOINT_QAI] = {.name = "QAI", .desc = "[I/O] QDIO Adapter Interrupt"}, - [IOINT_DAS] = {.name = "DAS", .desc = "[I/O] DASD"}, - [IOINT_C15] = {.name = "C15", .desc = "[I/O] 3215"}, - [IOINT_C70] = {.name = "C70", .desc = "[I/O] 3270"}, - [IOINT_TAP] = {.name = "TAP", .desc = "[I/O] Tape"}, - [IOINT_VMR] = {.name = "VMR", .desc = "[I/O] Unit Record Devices"}, - [IOINT_LCS] = {.name = "LCS", .desc = "[I/O] LCS"}, - [IOINT_CLW] = {.name = "CLW", .desc = "[I/O] CLAW"}, - [IOINT_CTC] = {.name = "CTC", .desc = "[I/O] CTC"}, - [IOINT_APB] = {.name = "APB", .desc = "[I/O] AP Bus"}, - [IOINT_ADM] = {.name = "ADM", .desc = "[I/O] EADM Subchannel"}, - [IOINT_CSC] = {.name = "CSC", .desc = "[I/O] CHSC Subchannel"}, - [IOINT_PCI] = {.name = "PCI", .desc = "[I/O] PCI Interrupt" }, - [IOINT_MSI] = {.name = "MSI", .desc = "[I/O] MSI Interrupt" }, + [IO_INTERRUPT] = {.name = "I/O"} +}; + +/* + * The list of split external and I/O interrupts that appear only in + * /proc/interrupts. + * In addition this list contains non external / I/O events like NMIs. + */ +static const struct irq_class irqclass_sub_desc[NR_ARCH_IRQS] = { + [IRQEXT_CLK] = {.name = "CLK", .desc = "[EXT] Clock Comparator"}, + [IRQEXT_EXC] = {.name = "EXC", .desc = "[EXT] External Call"}, + [IRQEXT_EMS] = {.name = "EMS", .desc = "[EXT] Emergency Signal"}, + [IRQEXT_TMR] = {.name = "TMR", .desc = "[EXT] CPU Timer"}, + [IRQEXT_TLA] = {.name = "TAL", .desc = "[EXT] Timing Alert"}, + [IRQEXT_PFL] = {.name = "PFL", .desc = "[EXT] Pseudo Page Fault"}, + [IRQEXT_DSD] = {.name = "DSD", .desc = "[EXT] DASD Diag"}, + [IRQEXT_VRT] = {.name = "VRT", .desc = "[EXT] Virtio"}, + [IRQEXT_SCP] = {.name = "SCP", .desc = "[EXT] Service Call"}, + [IRQEXT_IUC] = {.name = "IUC", .desc = "[EXT] IUCV"}, + [IRQEXT_CMS] = {.name = "CMS", .desc = "[EXT] CPU-Measurement: Sampling"}, + [IRQEXT_CMC] = {.name = "CMC", .desc = "[EXT] CPU-Measurement: Counter"}, + [IRQEXT_CMR] = {.name = "CMR", .desc = "[EXT] CPU-Measurement: RI"}, + [IRQIO_CIO] = {.name = "CIO", .desc = "[I/O] Common I/O Layer Interrupt"}, + [IRQIO_QAI] = {.name = "QAI", .desc = "[I/O] QDIO Adapter Interrupt"}, + [IRQIO_DAS] = {.name = "DAS", .desc = "[I/O] DASD"}, + [IRQIO_C15] = {.name = "C15", .desc = "[I/O] 3215"}, + [IRQIO_C70] = {.name = "C70", .desc = "[I/O] 3270"}, + [IRQIO_TAP] = {.name = "TAP", .desc = "[I/O] Tape"}, + [IRQIO_VMR] = {.name = "VMR", .desc = "[I/O] Unit Record Devices"}, + [IRQIO_LCS] = {.name = "LCS", .desc = "[I/O] LCS"}, + [IRQIO_CLW] = {.name = "CLW", .desc = "[I/O] CLAW"}, + [IRQIO_CTC] = {.name = "CTC", .desc = "[I/O] CTC"}, + [IRQIO_APB] = {.name = "APB", .desc = "[I/O] AP Bus"}, + [IRQIO_ADM] = {.name = "ADM", .desc = "[I/O] EADM Subchannel"}, + [IRQIO_CSC] = {.name = "CSC", .desc = "[I/O] CHSC Subchannel"}, + [IRQIO_PCI] = {.name = "PCI", .desc = "[I/O] PCI Interrupt" }, + [IRQIO_MSI] = {.name = "MSI", .desc = "[I/O] MSI Interrupt" }, [NMI_NMI] = {.name = "NMI", .desc = "[NMI] Machine Check"}, }; @@ -68,30 +89,34 @@ static const struct irq_class intrclass_names[] = { */ int show_interrupts(struct seq_file *p, void *v) { - int i = *(loff_t *) v, j; + int irq = *(loff_t *) v; + int cpu; get_online_cpus(); - if (i == 0) { + if (irq == 0) { seq_puts(p, " "); - for_each_online_cpu(j) - seq_printf(p, "CPU%d ",j); + for_each_online_cpu(cpu) + seq_printf(p, "CPU%d ", cpu); seq_putc(p, '\n'); } - - if (i < NR_IRQS) { - seq_printf(p, "%s: ", intrclass_names[i].name); -#ifndef CONFIG_SMP - seq_printf(p, "%10u ", kstat_irqs(i)); -#else - for_each_online_cpu(j) - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); -#endif - if (intrclass_names[i].desc) - seq_printf(p, " %s", intrclass_names[i].desc); - seq_putc(p, '\n'); - } + if (irq < NR_IRQS) { + seq_printf(p, "%s: ", irqclass_main_desc[irq].name); + for_each_online_cpu(cpu) + seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[irq]); + seq_putc(p, '\n'); + goto skip_arch_irqs; + } + for (irq = 0; irq < NR_ARCH_IRQS; irq++) { + seq_printf(p, "%s: ", irqclass_sub_desc[irq].name); + for_each_online_cpu(cpu) + seq_printf(p, "%10u ", per_cpu(irq_stat, cpu).irqs[irq]); + if (irqclass_sub_desc[irq].desc) + seq_printf(p, " %s", irqclass_sub_desc[irq].desc); + seq_putc(p, '\n'); + } +skip_arch_irqs: put_online_cpus(); - return 0; + return 0; } /* diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c index a6daa5c5cdb0..7918fbea36bb 100644 --- a/arch/s390/kernel/nmi.c +++ b/arch/s390/kernel/nmi.c @@ -254,7 +254,7 @@ void notrace s390_do_machine_check(struct pt_regs *regs) int umode; nmi_enter(); - kstat_cpu(smp_processor_id()).irqs[NMI_NMI]++; + inc_irq_stat(NMI_NMI); mci = (struct mci *) &S390_lowcore.mcck_interruption_code; mcck = &__get_cpu_var(cpu_mcck); umode = user_mode(regs); diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c index c4e7269d4a09..86ec7447e1f5 100644 --- a/arch/s390/kernel/perf_cpum_cf.c +++ b/arch/s390/kernel/perf_cpum_cf.c @@ -229,7 +229,7 @@ static void cpumf_measurement_alert(struct ext_code ext_code, if (!(alert & CPU_MF_INT_CF_MASK)) return; - kstat_cpu(smp_processor_id()).irqs[EXTINT_CMC]++; + inc_irq_stat(IRQEXT_CMC); cpuhw = &__get_cpu_var(cpu_hw_events); /* Measurement alerts are shared and might happen when the PMU diff --git a/arch/s390/kernel/runtime_instr.c b/arch/s390/kernel/runtime_instr.c index 61066f6f71a5..077a99389b07 100644 --- a/arch/s390/kernel/runtime_instr.c +++ b/arch/s390/kernel/runtime_instr.c @@ -71,7 +71,7 @@ static void runtime_instr_int_handler(struct ext_code ext_code, if (!(param32 & CPU_MF_INT_RI_MASK)) return; - kstat_cpu(smp_processor_id()).irqs[EXTINT_CMR]++; + inc_irq_stat(IRQEXT_CMR); if (!current->thread.ri_cb) return; diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 82664a3c17ee..4a36d5b5e4c9 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -433,9 +433,9 @@ static void do_ext_call_interrupt(struct ext_code ext_code, cpu = smp_processor_id(); if (ext_code.code == 0x1202) - kstat_cpu(cpu).irqs[EXTINT_EXC]++; + inc_irq_stat(IRQEXT_EXC); else - kstat_cpu(cpu).irqs[EXTINT_EMS]++; + inc_irq_stat(IRQEXT_EMS); /* * handle bit signal external calls */ diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 7fcd690d42c7..aff0e350d776 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -168,7 +168,7 @@ static void clock_comparator_interrupt(struct ext_code ext_code, unsigned int param32, unsigned long param64) { - kstat_cpu(smp_processor_id()).irqs[EXTINT_CLK]++; + inc_irq_stat(IRQEXT_CLK); if (S390_lowcore.clock_comparator == -1ULL) set_clock_comparator(S390_lowcore.clock_comparator); } @@ -179,7 +179,7 @@ static void stp_timing_alert(struct stp_irq_parm *); static void timing_alert_interrupt(struct ext_code ext_code, unsigned int param32, unsigned long param64) { - kstat_cpu(smp_processor_id()).irqs[EXTINT_TLA]++; + inc_irq_stat(IRQEXT_TLA); if (param32 & 0x00c40000) etr_timing_alert((struct etr_irq_parm *) ¶m32); if (param32 & 0x00038000) diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 42601d6e166f..2fb9e63b8fc4 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -569,7 +569,7 @@ static void pfault_interrupt(struct ext_code ext_code, subcode = ext_code.subcode; if ((subcode & 0xff00) != __SUBCODE_MASK) return; - kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++; + inc_irq_stat(IRQEXT_PFL); /* Get the token (= pid of the affected task). */ pid = sizeof(void *) == 4 ? param32 : param64; rcu_read_lock(); diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c index 0cb385da202c..b5b2916895e0 100644 --- a/arch/s390/oprofile/hwsampler.c +++ b/arch/s390/oprofile/hwsampler.c @@ -233,7 +233,7 @@ static void hws_ext_handler(struct ext_code ext_code, if (!(param32 & CPU_MF_INT_SF_MASK)) return; - kstat_cpu(smp_processor_id()).irqs[EXTINT_CMS]++; + inc_irq_stat(IRQEXT_CMS); atomic_xchg(&cb->ext_params, atomic_read(&cb->ext_params) | param32); if (hws_wq) diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c index e985744f6334..60e0372545d2 100644 --- a/arch/s390/pci/pci.c +++ b/arch/s390/pci/pci.c @@ -440,7 +440,7 @@ static void zpci_irq_handler(void *dont, void *need) int rescan = 0, max = aisb_max; struct zdev_irq_map *imap; - kstat_cpu(smp_processor_id()).irqs[IOINT_PCI]++; + inc_irq_stat(IRQIO_PCI); sbit = start; scan: @@ -452,7 +452,7 @@ scan: /* find vector bit */ imap = bucket->imap[sbit]; for_each_set_bit_left(mbit, &imap->aibv, imap->msi_vecs) { - kstat_cpu(smp_processor_id()).irqs[IOINT_MSI]++; + inc_irq_stat(IRQIO_MSI); clear_bit(63 - mbit, &imap->aibv); spin_lock(&imap->lock); diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index 9bd5da36f99e..704488d0f819 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -248,7 +248,7 @@ static void dasd_ext_handler(struct ext_code ext_code, default: return; } - kstat_cpu(smp_processor_id()).irqs[EXTINT_DSD]++; + inc_irq_stat(IRQEXT_DSD); if (!ip) { /* no intparm: unsolicited interrupt */ DBF_EVENT(DBF_NOTICE, "%s", "caught unsolicited " "interrupt"); diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 806fe912d6e7..e37bc1620d14 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -4274,7 +4274,7 @@ static struct ccw_driver dasd_eckd_driver = { .thaw = dasd_generic_restore_device, .restore = dasd_generic_restore_device, .uc_handler = dasd_generic_uc_handler, - .int_class = IOINT_DAS, + .int_class = IRQIO_DAS, }; /* diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c index eb748507c7fa..414698584344 100644 --- a/drivers/s390/block/dasd_fba.c +++ b/drivers/s390/block/dasd_fba.c @@ -78,7 +78,7 @@ static struct ccw_driver dasd_fba_driver = { .freeze = dasd_generic_pm_freeze, .thaw = dasd_generic_restore_device, .restore = dasd_generic_restore_device, - .int_class = IOINT_DAS, + .int_class = IRQIO_DAS, }; static void diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index 40084501c31b..1c1dae0deea3 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -805,7 +805,7 @@ static struct ccw_driver raw3215_ccw_driver = { .freeze = &raw3215_pm_stop, .thaw = &raw3215_pm_start, .restore = &raw3215_pm_start, - .int_class = IOINT_C15, + .int_class = IRQIO_C15, }; #ifdef CONFIG_TN3215_CONSOLE diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c index f3b8bb84faf2..9a6c140c5f07 100644 --- a/drivers/s390/char/raw3270.c +++ b/drivers/s390/char/raw3270.c @@ -1396,7 +1396,7 @@ static struct ccw_driver raw3270_ccw_driver = { .freeze = &raw3270_pm_stop, .thaw = &raw3270_pm_start, .restore = &raw3270_pm_start, - .int_class = IOINT_C70, + .int_class = IRQIO_C70, }; static int diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c index 4fa21f7e2308..12c16a65dd25 100644 --- a/drivers/s390/char/sclp.c +++ b/drivers/s390/char/sclp.c @@ -400,7 +400,7 @@ static void sclp_interrupt_handler(struct ext_code ext_code, u32 finished_sccb; u32 evbuf_pending; - kstat_cpu(smp_processor_id()).irqs[EXTINT_SCP]++; + inc_irq_stat(IRQEXT_SCP); spin_lock(&sclp_lock); finished_sccb = param32 & 0xfffffff8; evbuf_pending = param32 & 0x3; @@ -813,7 +813,7 @@ static void sclp_check_handler(struct ext_code ext_code, { u32 finished_sccb; - kstat_cpu(smp_processor_id()).irqs[EXTINT_SCP]++; + inc_irq_stat(IRQEXT_SCP); finished_sccb = param32 & 0xfffffff8; /* Is this the interrupt we are waiting for? */ if (finished_sccb == 0) diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c index 6ae929c024ae..9aa79702b370 100644 --- a/drivers/s390/char/tape_34xx.c +++ b/drivers/s390/char/tape_34xx.c @@ -1193,7 +1193,7 @@ static struct ccw_driver tape_34xx_driver = { .set_online = tape_34xx_online, .set_offline = tape_generic_offline, .freeze = tape_generic_pm_suspend, - .int_class = IOINT_TAP, + .int_class = IRQIO_TAP, }; static int diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c index 1b0eb49f739c..327cb19ad0b0 100644 --- a/drivers/s390/char/tape_3590.c +++ b/drivers/s390/char/tape_3590.c @@ -1656,7 +1656,7 @@ static struct ccw_driver tape_3590_driver = { .set_offline = tape_generic_offline, .set_online = tape_3590_online, .freeze = tape_generic_pm_suspend, - .int_class = IOINT_TAP, + .int_class = IRQIO_TAP, }; /* diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c index 73bef0bd394c..483f72ba030d 100644 --- a/drivers/s390/char/vmur.c +++ b/drivers/s390/char/vmur.c @@ -74,7 +74,7 @@ static struct ccw_driver ur_driver = { .set_online = ur_set_online, .set_offline = ur_set_offline, .freeze = ur_pm_suspend, - .int_class = IOINT_VMR, + .int_class = IRQIO_VMR, }; static DEFINE_MUTEX(vmur_mutex); diff --git a/drivers/s390/cio/chsc_sch.c b/drivers/s390/cio/chsc_sch.c index 8f9a1a384496..facdf809113f 100644 --- a/drivers/s390/cio/chsc_sch.c +++ b/drivers/s390/cio/chsc_sch.c @@ -58,7 +58,7 @@ static void chsc_subchannel_irq(struct subchannel *sch) CHSC_LOG(4, "irb"); CHSC_LOG_HEX(4, irb, sizeof(*irb)); - kstat_cpu(smp_processor_id()).irqs[IOINT_CSC]++; + inc_irq_stat(IRQIO_CSC); /* Copy irb to provided request and set done. */ if (!request) { diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index ebf61d5346f7..c8faf6230b0f 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -619,7 +619,7 @@ void __irq_entry do_IRQ(struct pt_regs *regs) sch = (struct subchannel *)(unsigned long)tpi_info->intparm; if (!sch) { /* Clear pending interrupt condition. */ - kstat_cpu(smp_processor_id()).irqs[IOINT_CIO]++; + inc_irq_stat(IRQIO_CIO); tsch(tpi_info->schid, irb); continue; } @@ -633,9 +633,9 @@ void __irq_entry do_IRQ(struct pt_regs *regs) if (sch->driver && sch->driver->irq) sch->driver->irq(sch); else - kstat_cpu(smp_processor_id()).irqs[IOINT_CIO]++; + inc_irq_stat(IRQIO_CIO); } else - kstat_cpu(smp_processor_id()).irqs[IOINT_CIO]++; + inc_irq_stat(IRQIO_CIO); spin_unlock(sch->lock); /* * Are more interrupts pending? @@ -678,7 +678,7 @@ static void cio_tsch(struct subchannel *sch) if (sch->driver && sch->driver->irq) sch->driver->irq(sch); else - kstat_cpu(smp_processor_id()).irqs[IOINT_CIO]++; + inc_irq_stat(IRQIO_CIO); if (!irq_context) { irq_exit(); _local_bh_enable(); diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 6995cff44636..7cd5c6812ac7 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -758,7 +758,7 @@ static int io_subchannel_initialize_dev(struct subchannel *sch, struct ccw_device *cdev) { cdev->private->cdev = cdev; - cdev->private->int_class = IOINT_CIO; + cdev->private->int_class = IRQIO_CIO; atomic_set(&cdev->private->onoff, 0); cdev->dev.parent = &sch->dev; cdev->dev.release = ccw_device_release; @@ -1023,7 +1023,7 @@ static void io_subchannel_irq(struct subchannel *sch) if (cdev) dev_fsm_event(cdev, DEV_EVENT_INTERRUPT); else - kstat_cpu(smp_processor_id()).irqs[IOINT_CIO]++; + inc_irq_stat(IRQIO_CIO); } void io_subchannel_init_config(struct subchannel *sch) @@ -1634,7 +1634,7 @@ ccw_device_probe_console(void) memset(&console_private, 0, sizeof(struct ccw_device_private)); console_cdev.private = &console_private; console_private.cdev = &console_cdev; - console_private.int_class = IOINT_CIO; + console_private.int_class = IRQIO_CIO; ret = ccw_device_console_enable(&console_cdev, sch); if (ret) { cio_release_console(); @@ -1715,13 +1715,13 @@ ccw_device_probe (struct device *dev) if (cdrv->int_class != 0) cdev->private->int_class = cdrv->int_class; else - cdev->private->int_class = IOINT_CIO; + cdev->private->int_class = IRQIO_CIO; ret = cdrv->probe ? cdrv->probe(cdev) : -ENODEV; if (ret) { cdev->drv = NULL; - cdev->private->int_class = IOINT_CIO; + cdev->private->int_class = IRQIO_CIO; return ret; } @@ -1755,7 +1755,7 @@ ccw_device_remove (struct device *dev) } ccw_device_set_timeout(cdev, 0); cdev->drv = NULL; - cdev->private->int_class = IOINT_CIO; + cdev->private->int_class = IRQIO_CIO; return 0; } diff --git a/drivers/s390/cio/device.h b/drivers/s390/cio/device.h index 2e575cff9845..7d4ecb65db00 100644 --- a/drivers/s390/cio/device.h +++ b/drivers/s390/cio/device.h @@ -61,11 +61,10 @@ dev_fsm_event(struct ccw_device *cdev, enum dev_event dev_event) if (dev_event == DEV_EVENT_INTERRUPT) { if (state == DEV_STATE_ONLINE) - kstat_cpu(smp_processor_id()). - irqs[cdev->private->int_class]++; + inc_irq_stat(cdev->private->int_class); else if (state != DEV_STATE_CMFCHANGE && state != DEV_STATE_CMFUPDATE) - kstat_cpu(smp_processor_id()).irqs[IOINT_CIO]++; + inc_irq_stat(IRQIO_CIO); } dev_jumptable[state][dev_event](cdev, dev_event); } diff --git a/drivers/s390/cio/eadm_sch.c b/drivers/s390/cio/eadm_sch.c index 6c9673400464..d9eddcba7e88 100644 --- a/drivers/s390/cio/eadm_sch.c +++ b/drivers/s390/cio/eadm_sch.c @@ -139,7 +139,7 @@ static void eadm_subchannel_irq(struct subchannel *sch) EADM_LOG(6, "irq"); EADM_LOG_HEX(6, irb, sizeof(*irb)); - kstat_cpu(smp_processor_id()).irqs[IOINT_ADM]++; + inc_irq_stat(IRQIO_ADM); if ((scsw->stctl & (SCSW_STCTL_ALERT_STATUS | SCSW_STCTL_STATUS_PEND)) && scsw->eswf == 1 && irb->esw.eadm.erw.r) diff --git a/drivers/s390/cio/qdio_thinint.c b/drivers/s390/cio/qdio_thinint.c index bdb394b066fc..bde5255200dc 100644 --- a/drivers/s390/cio/qdio_thinint.c +++ b/drivers/s390/cio/qdio_thinint.c @@ -182,7 +182,7 @@ static void tiqdio_thinint_handler(void *alsi, void *data) struct qdio_q *q; last_ai_time = S390_lowcore.int_clock; - kstat_cpu(smp_processor_id()).irqs[IOINT_QAI]++; + inc_irq_stat(IRQIO_QAI); /* protect tiq_list entries, only changed in activate or shutdown */ rcu_read_lock(); diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index 7b865a7300e6..b8b340ac5332 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -1272,7 +1272,7 @@ out: static void ap_interrupt_handler(void *unused1, void *unused2) { - kstat_cpu(smp_processor_id()).irqs[IOINT_APB]++; + inc_irq_stat(IRQIO_APB); tasklet_schedule(&ap_tasklet); } diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index 7dabef624da3..8491111aec12 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -392,7 +392,7 @@ static void kvm_extint_handler(struct ext_code ext_code, if ((ext_code.subcode & 0xff00) != VIRTIO_SUBCODE_64) return; - kstat_cpu(smp_processor_id()).irqs[EXTINT_VRT]++; + inc_irq_stat(IRQEXT_VRT); /* The LSB might be overloaded, we have to mask it */ vq = (struct virtqueue *)(param64 & ~1UL); diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c index 5c70a6599578..83bc9c5fa0c1 100644 --- a/drivers/s390/net/claw.c +++ b/drivers/s390/net/claw.c @@ -282,7 +282,7 @@ static struct ccw_driver claw_ccw_driver = { .ids = claw_ids, .probe = ccwgroup_probe_ccwdev, .remove = ccwgroup_remove_ccwdev, - .int_class = IOINT_CLW, + .int_class = IRQIO_CLW, }; static ssize_t claw_driver_group_store(struct device_driver *ddrv, diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c index 817b68925ddd..676f12049a36 100644 --- a/drivers/s390/net/ctcm_main.c +++ b/drivers/s390/net/ctcm_main.c @@ -1755,7 +1755,7 @@ static struct ccw_driver ctcm_ccw_driver = { .ids = ctcm_ids, .probe = ccwgroup_probe_ccwdev, .remove = ccwgroup_remove_ccwdev, - .int_class = IOINT_CTC, + .int_class = IRQIO_CTC, }; static struct ccwgroup_driver ctcm_group_driver = { diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c index 2ca0f1dd7a00..c645dc9e98af 100644 --- a/drivers/s390/net/lcs.c +++ b/drivers/s390/net/lcs.c @@ -2384,7 +2384,7 @@ static struct ccw_driver lcs_ccw_driver = { .ids = lcs_ids, .probe = ccwgroup_probe_ccwdev, .remove = ccwgroup_remove_ccwdev, - .int_class = IOINT_LCS, + .int_class = IRQIO_LCS, }; /** diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c index 3ad1f9db5f8b..df082508362d 100644 --- a/net/iucv/iucv.c +++ b/net/iucv/iucv.c @@ -1806,7 +1806,7 @@ static void iucv_external_interrupt(struct ext_code ext_code, struct iucv_irq_data *p; struct iucv_irq_list *work; - kstat_cpu(smp_processor_id()).irqs[EXTINT_IUC]++; + inc_irq_stat(IRQEXT_IUC); p = iucv_irq_data[smp_processor_id()]; if (p->ippathid >= iucv_max_pathid) { WARN_ON(p->ippathid >= iucv_max_pathid); From 93f3b2ee0abff5438e74cc90cf816429248cc8eb Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 2 Jan 2013 16:54:12 +0100 Subject: [PATCH 163/553] s390/irq: count cpu restart events Count CPU Restart events and make them visible via /proc/interrupts. Every CPU hotplug (online) event will increase the per cpu counter. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/irq.h | 1 + arch/s390/kernel/irq.c | 1 + arch/s390/kernel/smp.c | 1 + 3 files changed, 3 insertions(+) diff --git a/arch/s390/include/asm/irq.h b/arch/s390/include/asm/irq.h index c98dcac70ae0..7def77302d63 100644 --- a/arch/s390/include/asm/irq.h +++ b/arch/s390/include/asm/irq.h @@ -42,6 +42,7 @@ enum interruption_class { IRQIO_PCI, IRQIO_MSI, NMI_NMI, + CPU_RST, NR_ARCH_IRQS }; diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index 5f5462447aff..9df824ea1667 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -82,6 +82,7 @@ static const struct irq_class irqclass_sub_desc[NR_ARCH_IRQS] = { [IRQIO_PCI] = {.name = "PCI", .desc = "[I/O] PCI Interrupt" }, [IRQIO_MSI] = {.name = "MSI", .desc = "[I/O] MSI Interrupt" }, [NMI_NMI] = {.name = "NMI", .desc = "[NMI] Machine Check"}, + [CPU_RST] = {.name = "RST", .desc = "[CPU] CPU Restart"}, }; /* diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 4a36d5b5e4c9..7433a2f9e5cc 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -709,6 +709,7 @@ static void __cpuinit smp_start_secondary(void *cpuvoid) pfault_init(); notify_cpu_starting(smp_processor_id()); set_cpu_online(smp_processor_id(), true); + inc_irq_stat(CPU_RST); local_irq_enable(); /* cpu_idle will call schedule for us */ cpu_idle(); From 6673cd0bdbc802f2b05453a51fbcf2cf7d8be315 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 3 Jan 2013 14:31:53 +0100 Subject: [PATCH 164/553] s390/3215: partially revert tty close handling fix Partially revert ae289dc1f "s390/3215: fix tty close handling", since this leads sometimes to hanging agetty processes and therefore systems that get stuck while starting. This was magically fixed (bisected) by a common code patch from Alan Cox: 36b3c070 "tty: Move the handling of the tty release logic", however it was unrelated. Since the removed code worked for a decade, nobody knows anymore why it was in there in the first place and debugging the observed hang is non-trivial (at least for me :) ), let's just re-add the removed code before we see other side effects. Signed-off-by: Heiko Carstens --- drivers/s390/char/con3215.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index 1c1dae0deea3..33b7141a182f 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -44,6 +44,7 @@ #define RAW3215_NR_CCWS 3 #define RAW3215_TIMEOUT HZ/10 /* time for delayed output */ +#define RAW3215_FIXED 1 /* 3215 console device is not be freed */ #define RAW3215_WORKING 4 /* set if a request is being worked on */ #define RAW3215_THROTTLED 8 /* set if reading is disabled */ #define RAW3215_STOPPED 16 /* set if writing is disabled */ @@ -630,7 +631,8 @@ static void raw3215_shutdown(struct raw3215_info *raw) DECLARE_WAITQUEUE(wait, current); unsigned long flags; - if (!(raw->port.flags & ASYNC_INITIALIZED)) + if (!(raw->port.flags & ASYNC_INITIALIZED) || + (raw->flags & RAW3215_FIXED)) return; /* Wait for outstanding requests, then free irq */ spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); @@ -927,6 +929,8 @@ static int __init con3215_init(void) dev_set_drvdata(&cdev->dev, raw); cdev->handler = raw3215_irq; + raw->flags |= RAW3215_FIXED; + /* Request the console irq */ if (raw3215_startup(raw) != 0) { raw3215_free_info(raw); From 87890f92278dc0c2da4ecdaa196006a3c2cf3687 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 7 Jan 2013 13:52:53 +0100 Subject: [PATCH 165/553] s390/pci: define isa_dma_bridge_buggy MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Define isa_dma_bridge_buggy. Needed to make pci quirks compile: drivers/pci/quirks.c: In function ‘quirk_isa_dma_hangs’: drivers/pci/quirks.c:88:7: error: ‘isa_dma_bridge_buggy’ undeclared (first use in this function) Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/dma.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/s390/include/asm/dma.h b/arch/s390/include/asm/dma.h index de015d85e3e5..bb9bdcd20864 100644 --- a/arch/s390/include/asm/dma.h +++ b/arch/s390/include/asm/dma.h @@ -10,4 +10,10 @@ */ #define MAX_DMA_ADDRESS 0x80000000 +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + #endif /* _ASM_S390_DMA_H */ From 0872922f5dc24783101a2dd111ee406ea965a094 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 7 Jan 2013 13:56:17 +0100 Subject: [PATCH 166/553] s390/pm: export pm_power_off Export pm_power_off symbol. Needed by at least one of the new device drivers that come with CONFIG_PCI. And all other architectures export that symbol as well. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 2568590973ad..a5360de85ec7 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -16,7 +16,7 @@ #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt #include -#include +#include #include #include #include @@ -289,6 +289,7 @@ void machine_power_off(void) * Dummy power off function. */ void (*pm_power_off)(void) = machine_power_off; +EXPORT_SYMBOL_GPL(pm_power_off); static int __init early_parse_mem(char *p) { From 80020fbd65c17d3d9e7d80cfd3fa4c57ae7ff765 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 7 Jan 2013 13:58:38 +0100 Subject: [PATCH 167/553] s390/topology: export cpu_topology Export cpu_topology symbol, so it's available for modules. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/topology.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index f1aba87cceb8..4b2e3e317004 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -42,6 +43,7 @@ static struct mask_info socket_info; static struct mask_info book_info; struct cpu_topology_s390 cpu_topology[NR_CPUS]; +EXPORT_SYMBOL_GPL(cpu_topology); static cpumask_t cpu_group_map(struct mask_info *info, unsigned int cpu) { From 478740a14826c50595649b3dafed71576796dd95 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 7 Jan 2013 14:03:34 +0100 Subject: [PATCH 168/553] s390/pci: define read*_relaxed functions Just map the read*_relaxed() functions to their corresponding read*() functions. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/io.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/s390/include/asm/io.h b/arch/s390/include/asm/io.h index 16c3eb164f4f..27cb32185ce1 100644 --- a/arch/s390/include/asm/io.h +++ b/arch/s390/include/asm/io.h @@ -85,6 +85,11 @@ static inline void iounmap(volatile void __iomem *addr) #define __raw_writel zpci_write_u32 #define __raw_writeq zpci_write_u64 +#define readb_relaxed readb +#define readw_relaxed readw +#define readl_relaxed readl +#define readq_relaxed readq + #endif /* CONFIG_PCI */ #include From 901593f2bf221659a605bdc1dcb11376ea934163 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 19 Dec 2012 16:51:06 +0000 Subject: [PATCH 169/553] drm: Only evict the blocks required to create the requested hole Avoid clobbering adjacent blocks if they happen to expire earlier and amalgamate together to form the requested hole. In passing this fixes a regression from commit ea7b1dd44867e9cd6bac67e7c9fc3f128b5b255c Author: Daniel Vetter Date: Fri Feb 18 17:59:12 2011 +0100 drm: mm: track free areas implicitly which swaps the end address for size (with a potential overflow) and effectively causes the eviction code to clobber almost all earlier buffers above the evictee. v2: Check the original hole not the adjusted as the coloring may confuse us when later searching for the overlapping nodes. Also make sure that we do apply the range restriction and color adjustment in the same order for both scanning, searching and insertion. v3: Send the version that was actually tested. Note that this seems to be ducttape of decent quality ot paper over some of our unbind related gpu hangs reported since 3.7. It is not fully effective though, and certainly doesn't fix the underlying bug. Signed-off-by: Chris Wilson Cc: Daniel Vetter [danvet: Added note plus bugzilla link and tested-by.] Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55984 Tested-by: Norbert Preining Acked-by: Dave Airlie --- drivers/gpu/drm/drm_mm.c | 45 +++++++++++++++------------------------- include/drm/drm_mm.h | 2 +- 2 files changed, 18 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index 2bf9670ba29b..2aa331499f81 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -221,11 +221,13 @@ static void drm_mm_insert_helper_range(struct drm_mm_node *hole_node, BUG_ON(!hole_node->hole_follows || node->allocated); - if (mm->color_adjust) - mm->color_adjust(hole_node, color, &adj_start, &adj_end); - if (adj_start < start) adj_start = start; + if (adj_end > end) + adj_end = end; + + if (mm->color_adjust) + mm->color_adjust(hole_node, color, &adj_start, &adj_end); if (alignment) { unsigned tmp = adj_start % alignment; @@ -506,7 +508,7 @@ void drm_mm_init_scan(struct drm_mm *mm, mm->scan_size = size; mm->scanned_blocks = 0; mm->scan_hit_start = 0; - mm->scan_hit_size = 0; + mm->scan_hit_end = 0; mm->scan_check_range = 0; mm->prev_scanned_node = NULL; } @@ -533,7 +535,7 @@ void drm_mm_init_scan_with_range(struct drm_mm *mm, mm->scan_size = size; mm->scanned_blocks = 0; mm->scan_hit_start = 0; - mm->scan_hit_size = 0; + mm->scan_hit_end = 0; mm->scan_start = start; mm->scan_end = end; mm->scan_check_range = 1; @@ -552,8 +554,7 @@ int drm_mm_scan_add_block(struct drm_mm_node *node) struct drm_mm *mm = node->mm; struct drm_mm_node *prev_node; unsigned long hole_start, hole_end; - unsigned long adj_start; - unsigned long adj_end; + unsigned long adj_start, adj_end; mm->scanned_blocks++; @@ -570,14 +571,8 @@ int drm_mm_scan_add_block(struct drm_mm_node *node) node->node_list.next = &mm->prev_scanned_node->node_list; mm->prev_scanned_node = node; - hole_start = drm_mm_hole_node_start(prev_node); - hole_end = drm_mm_hole_node_end(prev_node); - - adj_start = hole_start; - adj_end = hole_end; - - if (mm->color_adjust) - mm->color_adjust(prev_node, mm->scan_color, &adj_start, &adj_end); + adj_start = hole_start = drm_mm_hole_node_start(prev_node); + adj_end = hole_end = drm_mm_hole_node_end(prev_node); if (mm->scan_check_range) { if (adj_start < mm->scan_start) @@ -586,11 +581,14 @@ int drm_mm_scan_add_block(struct drm_mm_node *node) adj_end = mm->scan_end; } + if (mm->color_adjust) + mm->color_adjust(prev_node, mm->scan_color, + &adj_start, &adj_end); + if (check_free_hole(adj_start, adj_end, mm->scan_size, mm->scan_alignment)) { mm->scan_hit_start = hole_start; - mm->scan_hit_size = hole_end; - + mm->scan_hit_end = hole_end; return 1; } @@ -626,19 +624,10 @@ int drm_mm_scan_remove_block(struct drm_mm_node *node) node_list); prev_node->hole_follows = node->scanned_preceeds_hole; - INIT_LIST_HEAD(&node->node_list); list_add(&node->node_list, &prev_node->node_list); - /* Only need to check for containement because start&size for the - * complete resulting free block (not just the desired part) is - * stored. */ - if (node->start >= mm->scan_hit_start && - node->start + node->size - <= mm->scan_hit_start + mm->scan_hit_size) { - return 1; - } - - return 0; + return (drm_mm_hole_node_end(node) > mm->scan_hit_start && + node->start < mm->scan_hit_end); } EXPORT_SYMBOL(drm_mm_scan_remove_block); diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h index 0f4a366f6fa6..3527fb3f75bb 100644 --- a/include/drm/drm_mm.h +++ b/include/drm/drm_mm.h @@ -70,7 +70,7 @@ struct drm_mm { unsigned long scan_color; unsigned long scan_size; unsigned long scan_hit_start; - unsigned scan_hit_size; + unsigned long scan_hit_end; unsigned scanned_blocks; unsigned long scan_start; unsigned long scan_end; From cc7ebb2892197fbf2512063547dfd1702bc936fa Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 18 Dec 2012 22:13:13 +0000 Subject: [PATCH 170/553] drm/i915: The sprite scaler on Ironlake also support YUV planes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a regression from commit 57779d06367a915ee03e6cb918d7575f0a46e419 Author: Ville Syrjälä Date: Wed Oct 31 17:50:14 2012 +0200 drm/i915: Fix display pixel format handling (which even says that they are supported on Ironlake, and then promptly rejects then...) Signed-off-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a9fb046b94a1..5c869cb26528 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8637,7 +8637,7 @@ int intel_framebuffer_init(struct drm_device *dev, case DRM_FORMAT_UYVY: case DRM_FORMAT_YVYU: case DRM_FORMAT_VYUY: - if (INTEL_INFO(dev)->gen < 6) + if (INTEL_INFO(dev)->gen < 5) return -EINVAL; break; default: From bc3b7756b5ff66828acf7bc24f148d28b8d61108 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 28 Dec 2012 17:09:03 +0800 Subject: [PATCH 171/553] regulator: max8997: Use uV in voltage_map_desc Current code does integer division (min_vol = min_uV / 1000) before pass min_vol to max8997_get_voltage_proper_val(). So it is possible min_vol is truncated to a smaller value. For example, if the request min_uV is 800900 for ldo. min_vol = 800900 / 1000 = 800 (mV) Then max8997_get_voltage_proper_val returns 800 mV for this case which is lower than the requested voltage. Use uV rather than mV in voltage_map_desc to prevent truncation by integer division. Signed-off-by: Axel Lin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/max8997.c | 36 +++++++++++++++++------------------- 1 file changed, 17 insertions(+), 19 deletions(-) diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c index df0eafb0dc7e..02be7fcae32f 100644 --- a/drivers/regulator/max8997.c +++ b/drivers/regulator/max8997.c @@ -71,26 +71,26 @@ struct voltage_map_desc { int step; }; -/* Voltage maps in mV */ +/* Voltage maps in uV */ static const struct voltage_map_desc ldo_voltage_map_desc = { - .min = 800, .max = 3950, .step = 50, + .min = 800000, .max = 3950000, .step = 50000, }; /* LDO1 ~ 18, 21 all */ static const struct voltage_map_desc buck1245_voltage_map_desc = { - .min = 650, .max = 2225, .step = 25, + .min = 650000, .max = 2225000, .step = 25000, }; /* Buck1, 2, 4, 5 */ static const struct voltage_map_desc buck37_voltage_map_desc = { - .min = 750, .max = 3900, .step = 50, + .min = 750000, .max = 3900000, .step = 50000, }; /* Buck3, 7 */ -/* current map in mA */ +/* current map in uA */ static const struct voltage_map_desc charger_current_map_desc = { - .min = 200, .max = 950, .step = 50, + .min = 200000, .max = 950000, .step = 50000, }; static const struct voltage_map_desc topoff_current_map_desc = { - .min = 50, .max = 200, .step = 10, + .min = 50000, .max = 200000, .step = 10000, }; static const struct voltage_map_desc *reg_voltage_map[] = { @@ -194,7 +194,7 @@ static int max8997_list_voltage(struct regulator_dev *rdev, if (val > desc->max) return -EINVAL; - return val * 1000; + return val; } static int max8997_get_enable_register(struct regulator_dev *rdev, @@ -485,7 +485,6 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev, { struct max8997_data *max8997 = rdev_get_drvdata(rdev); struct i2c_client *i2c = max8997->iodev->i2c; - int min_vol = min_uV / 1000, max_vol = max_uV / 1000; const struct voltage_map_desc *desc; int rid = rdev_get_id(rdev); int i, reg, shift, mask, ret; @@ -509,7 +508,7 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev, desc = reg_voltage_map[rid]; - i = max8997_get_voltage_proper_val(desc, min_vol, max_vol); + i = max8997_get_voltage_proper_val(desc, min_uV, max_uV); if (i < 0) return i; @@ -557,7 +556,7 @@ static int max8997_set_voltage_ldobuck_time_sel(struct regulator_dev *rdev, case MAX8997_BUCK4: case MAX8997_BUCK5: return DIV_ROUND_UP(desc->step * (new_selector - old_selector), - max8997->ramp_delay); + max8997->ramp_delay * 1000); } return 0; @@ -656,7 +655,6 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev, const struct voltage_map_desc *desc; int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg; bool gpio_dvs_mode = false; - int min_vol = min_uV / 1000, max_vol = max_uV / 1000; if (rid < MAX8997_BUCK1 || rid > MAX8997_BUCK7) return -EINVAL; @@ -681,7 +679,7 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev, selector); desc = reg_voltage_map[rid]; - new_val = max8997_get_voltage_proper_val(desc, min_vol, max_vol); + new_val = max8997_get_voltage_proper_val(desc, min_uV, max_uV); if (new_val < 0) return new_val; @@ -1123,8 +1121,8 @@ static int max8997_pmic_probe(struct platform_device *pdev) max8997->buck1_vol[i] = ret = max8997_get_voltage_proper_val( &buck1245_voltage_map_desc, - pdata->buck1_voltage[i] / 1000, - pdata->buck1_voltage[i] / 1000 + + pdata->buck1_voltage[i], + pdata->buck1_voltage[i] + buck1245_voltage_map_desc.step); if (ret < 0) goto err_out; @@ -1132,8 +1130,8 @@ static int max8997_pmic_probe(struct platform_device *pdev) max8997->buck2_vol[i] = ret = max8997_get_voltage_proper_val( &buck1245_voltage_map_desc, - pdata->buck2_voltage[i] / 1000, - pdata->buck2_voltage[i] / 1000 + + pdata->buck2_voltage[i], + pdata->buck2_voltage[i] + buck1245_voltage_map_desc.step); if (ret < 0) goto err_out; @@ -1141,8 +1139,8 @@ static int max8997_pmic_probe(struct platform_device *pdev) max8997->buck5_vol[i] = ret = max8997_get_voltage_proper_val( &buck1245_voltage_map_desc, - pdata->buck5_voltage[i] / 1000, - pdata->buck5_voltage[i] / 1000 + + pdata->buck5_voltage[i], + pdata->buck5_voltage[i] + buck1245_voltage_map_desc.step); if (ret < 0) goto err_out; From adf6178ad5552a7f2f742a8c85343c50f080c412 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 28 Dec 2012 17:10:20 +0800 Subject: [PATCH 172/553] regulator: max8998: Use uV in voltage_map_desc Integer division may truncate. This happens when pdata->buckx_voltagex setting is not align with 1000 uV. Thus use uV in voltage_map_desc, this ensures the selected voltage won't less than pdata buckx_voltagex settings. Signed-off-by: Axel Lin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/max8998.c | 42 ++++++++++++++++++------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index b821d08eb64a..06be8cc7aadf 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -51,39 +51,39 @@ struct voltage_map_desc { int step; }; -/* Voltage maps */ +/* Voltage maps in uV*/ static const struct voltage_map_desc ldo23_voltage_map_desc = { - .min = 800, .step = 50, .max = 1300, + .min = 800000, .step = 50000, .max = 1300000, }; static const struct voltage_map_desc ldo456711_voltage_map_desc = { - .min = 1600, .step = 100, .max = 3600, + .min = 1600000, .step = 100000, .max = 3600000, }; static const struct voltage_map_desc ldo8_voltage_map_desc = { - .min = 3000, .step = 100, .max = 3600, + .min = 3000000, .step = 100000, .max = 3600000, }; static const struct voltage_map_desc ldo9_voltage_map_desc = { - .min = 2800, .step = 100, .max = 3100, + .min = 2800000, .step = 100000, .max = 3100000, }; static const struct voltage_map_desc ldo10_voltage_map_desc = { - .min = 950, .step = 50, .max = 1300, + .min = 95000, .step = 50000, .max = 1300000, }; static const struct voltage_map_desc ldo1213_voltage_map_desc = { - .min = 800, .step = 100, .max = 3300, + .min = 800000, .step = 100000, .max = 3300000, }; static const struct voltage_map_desc ldo1415_voltage_map_desc = { - .min = 1200, .step = 100, .max = 3300, + .min = 1200000, .step = 100000, .max = 3300000, }; static const struct voltage_map_desc ldo1617_voltage_map_desc = { - .min = 1600, .step = 100, .max = 3600, + .min = 1600000, .step = 100000, .max = 3600000, }; static const struct voltage_map_desc buck12_voltage_map_desc = { - .min = 750, .step = 25, .max = 1525, + .min = 750000, .step = 25000, .max = 1525000, }; static const struct voltage_map_desc buck3_voltage_map_desc = { - .min = 1600, .step = 100, .max = 3600, + .min = 1600000, .step = 100000, .max = 3600000, }; static const struct voltage_map_desc buck4_voltage_map_desc = { - .min = 800, .step = 100, .max = 2300, + .min = 800000, .step = 100000, .max = 2300000, }; static const struct voltage_map_desc *ldo_voltage_map[] = { @@ -445,7 +445,7 @@ static int max8998_set_voltage_buck_time_sel(struct regulator_dev *rdev, if (max8998->iodev->type == TYPE_MAX8998 && !(val & MAX8998_ENRAMP)) return 0; - difference = (new_selector - old_selector) * desc->step; + difference = (new_selector - old_selector) * desc->step / 1000; if (difference > 0) return difference / ((val & 0x0f) + 1); @@ -702,7 +702,7 @@ static int max8998_pmic_probe(struct platform_device *pdev) i = 0; while (buck12_voltage_map_desc.min + buck12_voltage_map_desc.step*i - < (pdata->buck1_voltage1 / 1000)) + < pdata->buck1_voltage1) i++; max8998->buck1_vol[0] = i; ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i); @@ -713,7 +713,7 @@ static int max8998_pmic_probe(struct platform_device *pdev) i = 0; while (buck12_voltage_map_desc.min + buck12_voltage_map_desc.step*i - < (pdata->buck1_voltage2 / 1000)) + < pdata->buck1_voltage2) i++; max8998->buck1_vol[1] = i; @@ -725,7 +725,7 @@ static int max8998_pmic_probe(struct platform_device *pdev) i = 0; while (buck12_voltage_map_desc.min + buck12_voltage_map_desc.step*i - < (pdata->buck1_voltage3 / 1000)) + < pdata->buck1_voltage3) i++; max8998->buck1_vol[2] = i; @@ -737,7 +737,7 @@ static int max8998_pmic_probe(struct platform_device *pdev) i = 0; while (buck12_voltage_map_desc.min + buck12_voltage_map_desc.step*i - < (pdata->buck1_voltage4 / 1000)) + < pdata->buck1_voltage4) i++; max8998->buck1_vol[3] = i; @@ -763,7 +763,7 @@ static int max8998_pmic_probe(struct platform_device *pdev) i = 0; while (buck12_voltage_map_desc.min + buck12_voltage_map_desc.step*i - < (pdata->buck2_voltage1 / 1000)) + < pdata->buck2_voltage1) i++; max8998->buck2_vol[0] = i; ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i); @@ -774,7 +774,7 @@ static int max8998_pmic_probe(struct platform_device *pdev) i = 0; while (buck12_voltage_map_desc.min + buck12_voltage_map_desc.step*i - < (pdata->buck2_voltage2 / 1000)) + < pdata->buck2_voltage2) i++; max8998->buck2_vol[1] = i; ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i); @@ -792,8 +792,8 @@ static int max8998_pmic_probe(struct platform_device *pdev) int count = (desc->max - desc->min) / desc->step + 1; regulators[index].n_voltages = count; - regulators[index].min_uV = desc->min * 1000; - regulators[index].uV_step = desc->step * 1000; + regulators[index].min_uV = desc->min; + regulators[index].uV_step = desc->step; } config.dev = max8998->dev; From 41b645c8624df6ace020a8863ad1449d69140f7d Mon Sep 17 00:00:00 2001 From: Mike Dunn Date: Mon, 7 Jan 2013 13:55:12 -0800 Subject: [PATCH 173/553] ALSA: pxa27x: fix ac97 cold reset Cold reset on the pxa27x currently fails and pxa2xx_ac97_try_cold_reset: cold reset timeout (GSR=0x44) appears in the kernel log. Through trial-and-error (the pxa270 developer's manual is mostly incoherent on the topic of ac97 reset), I got cold reset to complete by setting the WARM_RST bit in the GCR register (and later noticed that pxa3xx does this for cold reset as well). Also, a timeout loop is needed to wait for the reset to complete. Tested on a palm treo 680 machine. Signed-off-by: Mike Dunn Acked-by: Igor Grinberg Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/arm/pxa2xx-ac97-lib.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index 6fc0ae90e5b1..1ecd0a66ecd3 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -148,6 +148,8 @@ static inline void pxa_ac97_warm_pxa27x(void) static inline void pxa_ac97_cold_pxa27x(void) { + unsigned int timeout; + GCR &= GCR_COLD_RST; /* clear everything but nCRST */ GCR &= ~GCR_COLD_RST; /* then assert nCRST */ @@ -157,8 +159,10 @@ static inline void pxa_ac97_cold_pxa27x(void) clk_enable(ac97conf_clk); udelay(5); clk_disable(ac97conf_clk); - GCR = GCR_COLD_RST; - udelay(50); + GCR = GCR_COLD_RST | GCR_WARM_RST; + timeout = 100; /* wait for the codec-ready bit to be set */ + while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) + mdelay(1); } #endif From 3b4bc7bccc7857274705b05cf81a0c72cfd0b0dd Mon Sep 17 00:00:00 2001 From: Mike Dunn Date: Mon, 7 Jan 2013 13:55:13 -0800 Subject: [PATCH 174/553] ALSA: pxa27x: fix ac97 warm reset This patch fixes some code that implements a work-around to a hardware bug in the ac97 controller on the pxa27x. A bug in the controller's warm reset functionality requires that the mfp used by the controller as the AC97_nRESET line be temporarily reconfigured as a generic output gpio (AF0) and manually held high for the duration of the warm reset cycle. This is what was done in the original code, but it was broken long ago by commit fb1bf8cd ([ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()) which changed the mfp to a GPIO input instead of a high output. The fix requires the ac97 controller to obtain the gpio via gpio_request_one(), with arguments that configure the gpio as an output initially driven high. Tested on a palm treo 680 machine. Reportedly, this broken code only prevents a warm reset on hardware that lacks a pull-up on the line, which appears to be the case for me. Signed-off-by: Mike Dunn Signed-off-by: Igor Grinberg Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- arch/arm/mach-pxa/include/mach/mfp-pxa27x.h | 3 +++ arch/arm/mach-pxa/pxa27x.c | 4 ++-- sound/arm/pxa2xx-ac97-lib.c | 18 +++++++++++++++++- 3 files changed, 22 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h index a611ad3153c7..b6132aa95dc0 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h @@ -463,6 +463,9 @@ GPIO76_LCD_PCLK, \ GPIO77_LCD_BIAS +/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */ +#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DEFAULT) +#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DEFAULT) extern int keypad_set_wake(unsigned int on); #endif /* __ASM_ARCH_MFP_PXA27X_H */ diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 8047ee0effc5..616cb87b6179 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -47,9 +47,9 @@ void pxa27x_clear_otgph(void) EXPORT_SYMBOL(pxa27x_clear_otgph); static unsigned long ac97_reset_config[] = { - GPIO113_GPIO, + GPIO113_AC97_nRESET_GPIO_HIGH, GPIO113_AC97_nRESET, - GPIO95_GPIO, + GPIO95_AC97_nRESET_GPIO_HIGH, GPIO95_AC97_nRESET, }; diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index 1ecd0a66ecd3..fff7753e35c1 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -344,8 +345,21 @@ int pxa2xx_ac97_hw_probe(struct platform_device *dev) } if (cpu_is_pxa27x()) { - /* Use GPIO 113 as AC97 Reset on Bulverde */ + /* + * This gpio is needed for a work-around to a bug in the ac97 + * controller during warm reset. The direction and level is set + * here so that it is an output driven high when switching from + * AC97_nRESET alt function to generic gpio. + */ + ret = gpio_request_one(reset_gpio, GPIOF_OUT_INIT_HIGH, + "pxa27x ac97 reset"); + if (ret < 0) { + pr_err("%s: gpio_request_one() failed: %d\n", + __func__, ret); + goto err_conf; + } pxa27x_assert_ac97reset(reset_gpio, 0); + ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK"); if (IS_ERR(ac97conf_clk)) { ret = PTR_ERR(ac97conf_clk); @@ -388,6 +402,8 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_probe); void pxa2xx_ac97_hw_remove(struct platform_device *dev) { + if (cpu_is_pxa27x()) + gpio_free(reset_gpio); GCR |= GCR_ACLINK_OFF; free_irq(IRQ_AC97, NULL); if (ac97conf_clk) { From 5f79c651e81e7731e9f252ac420bd81e144199d6 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Mon, 7 Jan 2013 17:26:58 +0100 Subject: [PATCH 175/553] arm: mvebu: use global interrupts for GPIOs on Armada XP The Armada XP GPIO controller has two ways of notifying interrupts: using global interrupts or using per-CPU interrupts. In an attempt to use the best available features, the 'marvell,armadaxp-gpio' compatible string selects a variant of the gpio-mvebu driver that makes use of the per-CPU interrupts. Unfortunately, this doesn't work properly in a SMP context, because we fall into cases where the GPIO interrupt is enabled on CPU X at the GPIO controller level, but on CPU Y at the interrupt controller level. It is not yet clear how to fix that easily. So for 3.8, our approach is to switch to global interrupts for GPIOs, so that we do not fall into this per-CPU interrupts problem. This patch therefore fixes GPIO interrupts on Armada XP platforms. Without this patch, GPIO interrupts simply do not work reliably, because their proper operation depends on which CPU the code requesting the interrupt is running. Signed-off-by: Thomas Petazzoni Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 14 ++++++-------- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 21 +++++++++------------ arch/arm/boot/dts/armada-xp-mv78460.dtsi | 21 +++++++++------------ 3 files changed, 24 insertions(+), 32 deletions(-) diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 271855a6e224..e041f42ed711 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -50,27 +50,25 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <17>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>; + interrupts = <87>, <88>, <89>; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 1c1937dbce73..9e23bd8c9536 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -51,39 +51,36 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>, <23>; + interrupts = <87>, <88>, <89>, <90>; }; gpio2: gpio@d0018180 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018180 0x40>, - <0xd0018870 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; ngpios = <3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <24>; + interrupts = <91>; }; ethernet@d0034000 { diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 4905cf3a5ef8..965966110e38 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -66,39 +66,36 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>, <23>; + interrupts = <87>, <88>, <89>, <90>; }; gpio2: gpio@d0018180 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018180 0x40>, - <0xd0018870 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; ngpios = <3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <24>; + interrupts = <91>; }; ethernet@d0034000 { From 013f6a5d3dd9e4ebf4b49ca427b9c1f2e2a1b767 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Thu, 3 Jan 2013 11:41:39 -0200 Subject: [PATCH 176/553] KVM: x86: use dynamic percpu allocations for shared msrs area Use dynamic percpu allocations for the shared msrs structure, to avoid using the limited reserved percpu space. Reviewed-by: Gleb Natapov Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/x86.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 76f54461f7cb..c243b81e3c74 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -120,7 +120,7 @@ struct kvm_shared_msrs { }; static struct kvm_shared_msrs_global __read_mostly shared_msrs_global; -static DEFINE_PER_CPU(struct kvm_shared_msrs, shared_msrs); +static struct kvm_shared_msrs __percpu *shared_msrs; struct kvm_stats_debugfs_item debugfs_entries[] = { { "pf_fixed", VCPU_STAT(pf_fixed) }, @@ -191,10 +191,10 @@ static void kvm_on_user_return(struct user_return_notifier *urn) static void shared_msr_update(unsigned slot, u32 msr) { - struct kvm_shared_msrs *smsr; u64 value; + unsigned int cpu = smp_processor_id(); + struct kvm_shared_msrs *smsr = per_cpu_ptr(shared_msrs, cpu); - smsr = &__get_cpu_var(shared_msrs); /* only read, and nobody should modify it at this time, * so don't need lock */ if (slot >= shared_msrs_global.nr) { @@ -226,7 +226,8 @@ static void kvm_shared_msr_cpu_online(void) void kvm_set_shared_msr(unsigned slot, u64 value, u64 mask) { - struct kvm_shared_msrs *smsr = &__get_cpu_var(shared_msrs); + unsigned int cpu = smp_processor_id(); + struct kvm_shared_msrs *smsr = per_cpu_ptr(shared_msrs, cpu); if (((value ^ smsr->values[slot].curr) & mask) == 0) return; @@ -242,7 +243,8 @@ EXPORT_SYMBOL_GPL(kvm_set_shared_msr); static void drop_user_return_notifiers(void *ignore) { - struct kvm_shared_msrs *smsr = &__get_cpu_var(shared_msrs); + unsigned int cpu = smp_processor_id(); + struct kvm_shared_msrs *smsr = per_cpu_ptr(shared_msrs, cpu); if (smsr->registered) kvm_on_user_return(&smsr->urn); @@ -5233,9 +5235,16 @@ int kvm_arch_init(void *opaque) goto out; } + r = -ENOMEM; + shared_msrs = alloc_percpu(struct kvm_shared_msrs); + if (!shared_msrs) { + printk(KERN_ERR "kvm: failed to allocate percpu kvm_shared_msrs\n"); + goto out; + } + r = kvm_mmu_module_init(); if (r) - goto out; + goto out_free_percpu; kvm_set_mmio_spte_mask(); kvm_init_msr_list(); @@ -5258,6 +5267,8 @@ int kvm_arch_init(void *opaque) return 0; +out_free_percpu: + free_percpu(shared_msrs); out: return r; } @@ -5275,6 +5286,7 @@ void kvm_arch_exit(void) #endif kvm_x86_ops = NULL; kvm_mmu_module_exit(); + free_percpu(shared_msrs); } int kvm_emulate_halt(struct kvm_vcpu *vcpu) From bef2a8d3f6cb91bc8743bdd63d3eb6a37bf27b12 Mon Sep 17 00:00:00 2001 From: Javier Martin Date: Tue, 30 Oct 2012 15:58:50 +0000 Subject: [PATCH 177/553] dmaengine: imx-dma: Disable use of hw_chain to fix sg_dma transfers. HW chaining is currently broken in imx-dma. It can be easily reproduced doing intensive accesses to a external MMC card and checking how the file system is corrupted. Preventing the driver to use HW chaining solves these issues. Signed-off-by: Javier Martin Signed-off-by: Vinod Koul --- drivers/dma/imx-dma.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index dbf0e6f8de8a..a7dcf78b1ff8 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -684,9 +684,8 @@ static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, break; } - imxdmac->hw_chaining = 1; - if (!imxdma_hw_chain(imxdmac)) - return -EINVAL; + imxdmac->hw_chaining = 0; + imxdmac->ccr_from_device = (mode | IMX_DMA_TYPE_FIFO) | ((IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR) << 2) | CCR_REN; From c16ed4be4c3c691e8c11dc6d22490f79f030d300 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 18 Dec 2012 22:13:14 +0000 Subject: [PATCH 178/553] drm/i915: Add DEBUG messages to all intel_create_user_framebuffer error paths This proves to be very useful when investigating why code suddenly started failing. Signed-off-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 33 +++++++++++++++++++++------- 1 file changed, 25 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 5c869cb26528..da1ad9c80bb5 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8598,19 +8598,30 @@ int intel_framebuffer_init(struct drm_device *dev, { int ret; - if (obj->tiling_mode == I915_TILING_Y) + if (obj->tiling_mode == I915_TILING_Y) { + DRM_DEBUG("hardware does not support tiling Y\n"); return -EINVAL; + } - if (mode_cmd->pitches[0] & 63) + if (mode_cmd->pitches[0] & 63) { + DRM_DEBUG("pitch (%d) must be at least 64 byte aligned\n", + mode_cmd->pitches[0]); return -EINVAL; + } /* FIXME <= Gen4 stride limits are bit unclear */ - if (mode_cmd->pitches[0] > 32768) + if (mode_cmd->pitches[0] > 32768) { + DRM_DEBUG("pitch (%d) must be at less than 32768\n", + mode_cmd->pitches[0]); return -EINVAL; + } if (obj->tiling_mode != I915_TILING_NONE && - mode_cmd->pitches[0] != obj->stride) + mode_cmd->pitches[0] != obj->stride) { + DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n", + mode_cmd->pitches[0], obj->stride); return -EINVAL; + } /* Reject formats not supported by any plane early. */ switch (mode_cmd->pixel_format) { @@ -8621,8 +8632,10 @@ int intel_framebuffer_init(struct drm_device *dev, break; case DRM_FORMAT_XRGB1555: case DRM_FORMAT_ARGB1555: - if (INTEL_INFO(dev)->gen > 3) + if (INTEL_INFO(dev)->gen > 3) { + DRM_DEBUG("invalid format: 0x%08x\n", mode_cmd->pixel_format); return -EINVAL; + } break; case DRM_FORMAT_XBGR8888: case DRM_FORMAT_ABGR8888: @@ -8630,18 +8643,22 @@ int intel_framebuffer_init(struct drm_device *dev, case DRM_FORMAT_ARGB2101010: case DRM_FORMAT_XBGR2101010: case DRM_FORMAT_ABGR2101010: - if (INTEL_INFO(dev)->gen < 4) + if (INTEL_INFO(dev)->gen < 4) { + DRM_DEBUG("invalid format: 0x%08x\n", mode_cmd->pixel_format); return -EINVAL; + } break; case DRM_FORMAT_YUYV: case DRM_FORMAT_UYVY: case DRM_FORMAT_YVYU: case DRM_FORMAT_VYUY: - if (INTEL_INFO(dev)->gen < 5) + if (INTEL_INFO(dev)->gen < 5) { + DRM_DEBUG("invalid format: 0x%08x\n", mode_cmd->pixel_format); return -EINVAL; + } break; default: - DRM_DEBUG_KMS("unsupported pixel format 0x%08x\n", mode_cmd->pixel_format); + DRM_DEBUG("unsupported pixel format 0x%08x\n", mode_cmd->pixel_format); return -EINVAL; } From 87ed50036b866db2ec2ba16b2a7aec4a2b0b7c39 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 7 Jan 2013 14:30:46 -0500 Subject: [PATCH 179/553] SUNRPC: Ensure we release the socket write lock if the rpc_task exits early If the rpc_task exits while holding the socket write lock before it has allocated an rpc slot, then the usual mechanism for releasing the write lock in xprt_release() is defeated. The problem occurs if the call to xprt_lock_write() initially fails, so that the rpc_task is put on the xprt->sending wait queue. If the task exits after being assigned the lock by __xprt_lock_write_func, but before it has retried the call to xprt_lock_and_alloc_slot(), then it calls xprt_release() while holding the write lock, but will immediately exit due to the test for task->tk_rqstp != NULL. Reported-by: Chris Perl Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org [>= 3.1] --- net/sunrpc/sched.c | 3 +-- net/sunrpc/xprt.c | 12 ++++++++++-- 2 files changed, 11 insertions(+), 4 deletions(-) diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index b4133bd13915..bfa31714581f 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -972,8 +972,7 @@ static void rpc_async_release(struct work_struct *work) static void rpc_release_resources_task(struct rpc_task *task) { - if (task->tk_rqstp) - xprt_release(task); + xprt_release(task); if (task->tk_msg.rpc_cred) { put_rpccred(task->tk_msg.rpc_cred); task->tk_msg.rpc_cred = NULL; diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index bd462a532acf..33811db8788a 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -1136,10 +1136,18 @@ static void xprt_request_init(struct rpc_task *task, struct rpc_xprt *xprt) void xprt_release(struct rpc_task *task) { struct rpc_xprt *xprt; - struct rpc_rqst *req; + struct rpc_rqst *req = task->tk_rqstp; - if (!(req = task->tk_rqstp)) + if (req == NULL) { + if (task->tk_client) { + rcu_read_lock(); + xprt = rcu_dereference(task->tk_client->cl_xprt); + if (xprt->snd_task == task) + xprt_release_write(xprt, task); + rcu_read_unlock(); + } return; + } xprt = req->rq_xprt; if (task->tk_ops->rpc_count_stats != NULL) From 120f80518125b8c312007a54106759d608487553 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 2 Jan 2013 15:32:00 +0000 Subject: [PATCH 180/553] regmap: debugfs: Fix attempts to read nonexistant register blocks Return the start of the last block we tried to read rather than a position, and also make sure we update the byte position while we're at it. Without this reads that go into nonexistant areas get confused. Signed-off-by: Mark Brown --- drivers/base/regmap/regmap-debugfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index 07aad786f817..43d51dc3d58b 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -108,7 +108,8 @@ static unsigned int regmap_debugfs_get_dump_start(struct regmap *map, return c->base_reg; } - ret = c->max; + *pos = c->min; + ret = c->base_reg; } return ret; From 5a1d6d172bc8a3ecf29add6c84d047025cb71566 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 8 Jan 2013 20:40:19 +0000 Subject: [PATCH 181/553] regmap: debugfs: Fix check for block start in cached seeks Check for the block we were asked to start from, not the position we're in. Signed-off-by: Mark Brown --- drivers/base/regmap/regmap-debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index 43d51dc3d58b..e8d15db2f126 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -103,7 +103,7 @@ static unsigned int regmap_debugfs_get_dump_start(struct regmap *map, /* Find the relevant block */ list_for_each_entry(c, &map->debugfs_off_cache, list) { - if (*pos >= c->min && *pos <= c->max) { + if (from >= c->min && from <= c->max) { *pos = c->min; return c->base_reg; } From 95f971c745a343255744703dc4ae8d78508519cc Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 8 Jan 2013 13:35:58 +0000 Subject: [PATCH 182/553] regmap: debugfs: Discard the cache if we fail to allocate an entry Rather than trying to soldier on with a partially allocated cache just throw the cache away and pretend we don't have one in case we can get a full cache next time around. Signed-off-by: Mark Brown --- drivers/base/regmap/regmap-debugfs.c | 29 +++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index e8d15db2f126..9099cd33fbcb 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -56,6 +56,19 @@ static const struct file_operations regmap_name_fops = { .llseek = default_llseek, }; +static void regmap_debugfs_free_dump_cache(struct regmap *map) +{ + struct regmap_debugfs_off_cache *c; + + while (!list_empty(&map->debugfs_off_cache)) { + c = list_first_entry(&map->debugfs_off_cache, + struct regmap_debugfs_off_cache, + list); + list_del(&c->list); + kfree(c); + } +} + /* * Work out where the start offset maps into register numbers, bearing * in mind that we suppress hidden registers. @@ -91,8 +104,10 @@ static unsigned int regmap_debugfs_get_dump_start(struct regmap *map, /* No cache entry? Start a new one */ if (!c) { c = kzalloc(sizeof(*c), GFP_KERNEL); - if (!c) - break; + if (!c) { + regmap_debugfs_free_dump_cache(map); + return base; + } c->min = p; c->base_reg = i; } @@ -388,16 +403,8 @@ void regmap_debugfs_init(struct regmap *map, const char *name) void regmap_debugfs_exit(struct regmap *map) { - struct regmap_debugfs_off_cache *c; - debugfs_remove_recursive(map->debugfs); - while (!list_empty(&map->debugfs_off_cache)) { - c = list_first_entry(&map->debugfs_off_cache, - struct regmap_debugfs_off_cache, - list); - list_del(&c->list); - kfree(c); - } + regmap_debugfs_free_dump_cache(map); kfree(map->debugfs_name); } From 5bd9f4bb34c16b62725b9486a290c01b1fdfec1c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 8 Jan 2013 13:44:50 +0000 Subject: [PATCH 183/553] regmap: debugfs: Ensure a correct return value for empty caches This should never happen in the real world. Signed-off-by: Mark Brown --- drivers/base/regmap/regmap-debugfs.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index 9099cd33fbcb..720e14248167 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -116,6 +116,16 @@ static unsigned int regmap_debugfs_get_dump_start(struct regmap *map, } } + /* + * This should never happen; we return above if we fail to + * allocate and we should never be in this code if there are + * no registers at all. + */ + if (list_empty(&map->debugfs_off_cache)) { + WARN_ON(list_empty(&map->debugfs_off_cache)); + return base; + } + /* Find the relevant block */ list_for_each_entry(c, &map->debugfs_off_cache, list) { if (from >= c->min && from <= c->max) { From e8d6539c8a94b88fc7ca5d6bdd9eeb0e64b434e4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 8 Jan 2013 18:47:52 +0000 Subject: [PATCH 184/553] regmap: debugfs: Make sure we store the last entry in the offset cache Signed-off-by: Mark Brown --- drivers/base/regmap/regmap-debugfs.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index 720e14248167..46a213a596e2 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -116,6 +116,15 @@ static unsigned int regmap_debugfs_get_dump_start(struct regmap *map, } } + /* Close the last entry off if we didn't scan beyond it */ + if (c) { + c->max = p - 1; + list_add_tail(&c->list, + &map->debugfs_off_cache); + } else { + return base; + } + /* * This should never happen; we return above if we fail to * allocate and we should never be in this code if there are From 18a9df42d53fabfa43b78be1104838cc8b9762e1 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Mon, 17 Dec 2012 09:53:32 +0100 Subject: [PATCH 185/553] target: use correct sense code for LUN communication failure The ASC/ASCQ code for 'Logical Unit Communication failure' is 0x08/0x00; 0x80/0x00 is vendor specific. Signed-off-by: Hannes Reinecke Cc: Nicholas Bellinger Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index c23c76ccef65..978762dc81bf 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2743,7 +2743,7 @@ transport_send_check_condition_and_sense(struct se_cmd *cmd, /* ILLEGAL REQUEST */ buffer[SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST; /* LOGICAL UNIT COMMUNICATION FAILURE */ - buffer[SPC_ASC_KEY_OFFSET] = 0x80; + buffer[SPC_ASC_KEY_OFFSET] = 0x08; break; } /* From c9be4a5c49cf51cc70a993f004c5bb30067a65ce Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Mon, 7 Jan 2013 21:17:00 +0000 Subject: [PATCH 186/553] net: prevent setting ttl=0 via IP_TTL A regression is introduced by the following commit: commit 4d52cfbef6266092d535237ba5a4b981458ab171 Author: Eric Dumazet Date: Tue Jun 2 00:42:16 2009 -0700 net: ipv4/ip_sockglue.c cleanups Pure cleanups but it is not a pure cleanup... - if (val != -1 && (val < 1 || val>255)) + if (val != -1 && (val < 0 || val > 255)) Since there is no reason provided to allow ttl=0, change it back. Reported-by: nitin padalia Cc: nitin padalia Cc: Eric Dumazet Cc: David S. Miller Signed-off-by: Cong Wang Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/ip_sockglue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c index 3c9d20880283..d9c4f113d709 100644 --- a/net/ipv4/ip_sockglue.c +++ b/net/ipv4/ip_sockglue.c @@ -590,7 +590,7 @@ static int do_ip_setsockopt(struct sock *sk, int level, case IP_TTL: if (optlen < 1) goto e_inval; - if (val != -1 && (val < 0 || val > 255)) + if (val != -1 && (val < 1 || val > 255)) goto e_inval; inet->uc_ttl = val; break; From d7dab4dbbb2d1b0c903378d6bade2e4ae161804e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 8 Jan 2013 13:51:30 +0100 Subject: [PATCH 187/553] ALSA: hda - Disable runtime D3 for Intel CPT & co We've got a few bug reports that the runtime D3 results in the dead HD-audio controller. It seems that the problem is in a deeper level than the sound driver itself, so as a temporal solution, disable the feature for these controllers again. Reported-and-tested-by: Vincent Blut Reported-and-tested-by: Maurizio Avogadro Cc: [v3.7] Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index cca87277baf0..0b6aebacc56b 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -573,9 +573,12 @@ enum { #define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */ /* quirks for Intel PCH */ -#define AZX_DCAPS_INTEL_PCH \ +#define AZX_DCAPS_INTEL_PCH_NOPM \ (AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | \ - AZX_DCAPS_COUNT_LPIB_DELAY | AZX_DCAPS_PM_RUNTIME) + AZX_DCAPS_COUNT_LPIB_DELAY) + +#define AZX_DCAPS_INTEL_PCH \ + (AZX_DCAPS_INTEL_PCH_NOPM | AZX_DCAPS_PM_RUNTIME) /* quirks for ATI SB / AMD Hudson */ #define AZX_DCAPS_PRESET_ATI_SB \ @@ -3586,13 +3589,13 @@ static void azx_remove(struct pci_dev *pci) static DEFINE_PCI_DEVICE_TABLE(azx_ids) = { /* CPT */ { PCI_DEVICE(0x8086, 0x1c20), - .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH }, + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM }, /* PBG */ { PCI_DEVICE(0x8086, 0x1d20), - .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH }, + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM }, /* Panther Point */ { PCI_DEVICE(0x8086, 0x1e20), - .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH }, + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM }, /* Lynx Point */ { PCI_DEVICE(0x8086, 0x8c20), .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH }, From 7ed4165e2d01bdbbb4c1086eb73eadf0f64cbbf0 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Wed, 19 Dec 2012 09:44:47 +0100 Subject: [PATCH 188/553] Revert "ALSA: hda - Shut up pins at power-saving mode with Conexnat codecs" This reverts commit 697c373e34613609cb5450f98b91fefb6e910588. The original patch was meant to remove clicking, but in fact caused even more clicking instead. Thanks to c4pp4 for doing most of the work with this bug. BugLink: https://bugs.launchpad.net/bugs/886975 Signed-off-by: David Henningsson Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 60890bfecc19..dd798c3196ff 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -558,24 +558,12 @@ static int conexant_build_controls(struct hda_codec *codec) return 0; } -#ifdef CONFIG_PM -static int conexant_suspend(struct hda_codec *codec) -{ - snd_hda_shutup_pins(codec); - return 0; -} -#endif - static const struct hda_codec_ops conexant_patch_ops = { .build_controls = conexant_build_controls, .build_pcms = conexant_build_pcms, .init = conexant_init, .free = conexant_free, .set_power_state = conexant_set_power, -#ifdef CONFIG_PM - .suspend = conexant_suspend, -#endif - .reboot_notify = snd_hda_shutup_pins, }; #ifdef CONFIG_SND_HDA_INPUT_BEEP @@ -4405,10 +4393,6 @@ static const struct hda_codec_ops cx_auto_patch_ops = { .init = cx_auto_init, .free = conexant_free, .unsol_event = snd_hda_jack_unsol_event, -#ifdef CONFIG_PM - .suspend = conexant_suspend, -#endif - .reboot_notify = snd_hda_shutup_pins, }; /* From ca320ac456099c29290568353d924157e626ede9 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 19 Dec 2012 12:14:22 +0000 Subject: [PATCH 189/553] drm/i915: Use pixel size for computing linear offsets into a sprite MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes an original bug in the sprite code that miscomputed the source offset into a linear YUV packed framebuffer, that was magnified into an oops with commit 5a35e99e8162d6820013a56ad15ea8bf937af5a6 Author: Damien Lespiau Date: Fri Oct 26 18:20:12 2012 +0100 drm/i915: adjust sprite base address Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: Damien Lespiau Cc: Ville Syrjälä Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sprite.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 827dcd4edf1c..d7b060e0a231 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -120,11 +120,10 @@ ivb_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb, I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]); I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x); - linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8); + linear_offset = y * fb->pitches[0] + x * pixel_size; sprsurf_offset = intel_gen4_compute_offset_xtiled(&x, &y, - fb->bits_per_pixel / 8, - fb->pitches[0]); + pixel_size, fb->pitches[0]); linear_offset -= sprsurf_offset; /* HSW consolidates SPRTILEOFF and SPRLINOFF into a single SPROFFSET @@ -286,11 +285,10 @@ ilk_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb, I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]); I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x); - linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8); + linear_offset = y * fb->pitches[0] + x * pixel_size; dvssurf_offset = intel_gen4_compute_offset_xtiled(&x, &y, - fb->bits_per_pixel / 8, - fb->pitches[0]); + pixel_size, fb->pitches[0]); linear_offset -= dvssurf_offset; if (obj->tiling_mode != I915_TILING_NONE) From b9bb37f5486ba05d2b557dbf1aeb754fef618985 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 9 Jan 2013 15:26:22 +0530 Subject: [PATCH 190/553] dma: tegra: implement flags parameters for cyclic transfer The flag parameter is added in the cyclic transfer request. Use the flag option of: - DMA_PREP_INTERRUPT for enabling interrupt. - DMA_CTRL_ACK for deciding whether ack is requred or not for descriptor. Signed-off-by: Laxman Dewangan CC: Signed-off-by: Vinod Koul --- drivers/dma/tegra20-apb-dma.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c index efdfffa13349..bf58bb8b0206 100644 --- a/drivers/dma/tegra20-apb-dma.c +++ b/drivers/dma/tegra20-apb-dma.c @@ -266,6 +266,7 @@ static struct tegra_dma_desc *tegra_dma_desc_get( if (async_tx_test_ack(&dma_desc->txd)) { list_del(&dma_desc->node); spin_unlock_irqrestore(&tdc->lock, flags); + dma_desc->txd.flags = 0; return dma_desc; } } @@ -1050,7 +1051,9 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic( TEGRA_APBDMA_AHBSEQ_WRAP_SHIFT; ahb_seq |= TEGRA_APBDMA_AHBSEQ_BUS_WIDTH_32; - csr |= TEGRA_APBDMA_CSR_FLOW | TEGRA_APBDMA_CSR_IE_EOC; + csr |= TEGRA_APBDMA_CSR_FLOW; + if (flags & DMA_PREP_INTERRUPT) + csr |= TEGRA_APBDMA_CSR_IE_EOC; csr |= tdc->dma_sconfig.slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT; apb_seq |= TEGRA_APBDMA_APBSEQ_WRAP_WORD_1; @@ -1095,7 +1098,8 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic( mem += len; } sg_req->last_sg = true; - dma_desc->txd.flags = 0; + if (flags & DMA_CTRL_ACK) + dma_desc->txd.flags = DMA_CTRL_ACK; /* * Make sure that mode should not be conflicting with currently From 56bde0f328428f2fc6e416510d8b42de6a0cfad5 Mon Sep 17 00:00:00 2001 From: Andre Schramm Date: Wed, 9 Jan 2013 14:40:18 +0100 Subject: [PATCH 191/553] ALSA: hdspm - Fix wordclock status on AES32 Use correct bitmask for AES32 cards to determine wordclock lock state, add missing bitmask for sync check and make output of the corresponding control and /proc coherent. Signed-off-by: Andre Schramm Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai --- sound/pci/rme9652/hdspm.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 6e02e064d7b4..223c3d9cc69e 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -441,6 +441,7 @@ MODULE_SUPPORTED_DEVICE("{{RME HDSPM-MADI}}"); */ /* status */ #define HDSPM_AES32_wcLock 0x0200000 +#define HDSPM_AES32_wcSync 0x0100000 #define HDSPM_AES32_wcFreq_bit 22 /* (status >> HDSPM_AES32_wcFreq_bit) & 0xF gives WC frequency (cf function HDSPM_bit2freq */ @@ -3467,10 +3468,12 @@ static int hdspm_wc_sync_check(struct hdspm *hdspm) switch (hdspm->io_type) { case AES32: status = hdspm_read(hdspm, HDSPM_statusRegister); - if (status & HDSPM_wcSync) - return 2; - else if (status & HDSPM_wcLock) - return 1; + if (status & HDSPM_AES32_wcLock) { + if (status & HDSPM_AES32_wcSync) + return 2; + else + return 1; + } return 0; break; @@ -4658,6 +4661,7 @@ snd_hdspm_proc_read_aes32(struct snd_info_entry * entry, unsigned int status; unsigned int status2; unsigned int timecode; + unsigned int wcLock, wcSync; int pref_syncref; char *autosync_ref; int x; @@ -4751,8 +4755,11 @@ snd_hdspm_proc_read_aes32(struct snd_info_entry * entry, snd_iprintf(buffer, "--- Status:\n"); + wcLock = status & HDSPM_AES32_wcLock; + wcSync = wcLock && (status & HDSPM_AES32_wcSync); + snd_iprintf(buffer, "Word: %s Frequency: %d\n", - (status & HDSPM_AES32_wcLock) ? "Sync " : "No Lock", + (wcLock) ? (wcSync ? "Sync " : "Lock ") : "No Lock", HDSPM_bit2freq((status >> HDSPM_AES32_wcFreq_bit) & 0xF)); for (x = 0; x < 8; x++) { From 7b7a4efe76a8a96b20f7ac8047869f43e65b10e4 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 7 Jan 2013 23:05:17 -0200 Subject: [PATCH 192/553] iio: mxs-lradc: indexes are unsigned Fix the following warning when building with W=1 option: drivers/staging/iio/adc/mxs-lradc.c: In function 'mxs_lradc_trigger_handler': drivers/staging/iio/adc/mxs-lradc.c:244:2: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/mxs-lradc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index fb31b457a56a..c5ceb9d90ea8 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -239,7 +239,7 @@ static irqreturn_t mxs_lradc_trigger_handler(int irq, void *p) struct mxs_lradc *lradc = iio_priv(iio); const uint32_t chan_value = LRADC_CH_ACCUMULATE | ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); - int i, j = 0; + unsigned int i, j = 0; for_each_set_bit(i, iio->active_scan_mask, iio->masklength) { lradc->buffer[j] = readl(lradc->base + LRADC_CH(j)); From a02a8c42b588059aa06dff6f614a7afcba12df69 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 9 Jan 2013 14:01:00 +0000 Subject: [PATCH 193/553] staging:iio:adis16080: Perform sign extension The adis16080 reports sample values in twos complement. So we need to perform a sign extension on the result, otherwise negative values will be reported incorrectly as large positive values. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/gyro/adis16080_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/gyro/adis16080_core.c b/drivers/staging/iio/gyro/adis16080_core.c index 3525a68d6a75..41d7350d030f 100644 --- a/drivers/staging/iio/gyro/adis16080_core.c +++ b/drivers/staging/iio/gyro/adis16080_core.c @@ -69,7 +69,7 @@ static int adis16080_spi_read(struct iio_dev *indio_dev, ret = spi_read(st->us, st->buf, 2); if (ret == 0) - *val = ((st->buf[0] & 0xF) << 8) | st->buf[1]; + *val = sign_extend32(((st->buf[0] & 0xF) << 8) | st->buf[1], 11); mutex_unlock(&st->buf_lock); return ret; From 408e9375610cca6d54e9c654cbe05a647687e12e Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Thu, 3 Jan 2013 17:55:52 +0900 Subject: [PATCH 194/553] f2fs: revisit the f2fs_gc flow I'd like to revisit the f2fs_gc flow and rewrite as follows. 1. In practical, the nGC parameter of f2fs_gc is meaningless. So, let's remove it. 2. Background GC marks victim blocks as dirty one at a time. 3. Foreground GC should do cleaning job until acquiring enough free sections. Afterwards, it needs to do checkpoint. Signed-off-by: Jaegeuk Kim --- fs/f2fs/f2fs.h | 2 +- fs/f2fs/gc.c | 60 +++++++++++++++++------------------------------ fs/f2fs/segment.c | 2 +- 3 files changed, 23 insertions(+), 41 deletions(-) diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 280713289d8c..285e43d602f3 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -986,7 +986,7 @@ int do_write_data_page(struct page *); int start_gc_thread(struct f2fs_sb_info *); void stop_gc_thread(struct f2fs_sb_info *); block_t start_bidx_of_node(unsigned int); -int f2fs_gc(struct f2fs_sb_info *, int); +int f2fs_gc(struct f2fs_sb_info *); void build_gc_manager(struct f2fs_sb_info *); int create_gc_caches(void); void destroy_gc_caches(void); diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c index b0ec721e984a..b4dd90cf1f18 100644 --- a/fs/f2fs/gc.c +++ b/fs/f2fs/gc.c @@ -78,7 +78,7 @@ static int gc_thread_func(void *data) sbi->bg_gc++; - if (f2fs_gc(sbi, 1) == GC_NONE) + if (f2fs_gc(sbi) == GC_NONE) wait_ms = GC_THREAD_NOGC_SLEEP_TIME; else if (wait_ms == GC_THREAD_NOGC_SLEEP_TIME) wait_ms = GC_THREAD_MAX_SLEEP_TIME; @@ -651,62 +651,44 @@ static int do_garbage_collect(struct f2fs_sb_info *sbi, unsigned int segno, return ret; } -int f2fs_gc(struct f2fs_sb_info *sbi, int nGC) +int f2fs_gc(struct f2fs_sb_info *sbi) { - unsigned int segno; - int old_free_secs, cur_free_secs; - int gc_status, nfree; struct list_head ilist; + unsigned int segno, i; int gc_type = BG_GC; + int gc_status = GC_NONE; INIT_LIST_HEAD(&ilist); gc_more: - nfree = 0; - gc_status = GC_NONE; + if (!(sbi->sb->s_flags & MS_ACTIVE)) + goto stop; if (has_not_enough_free_secs(sbi)) - old_free_secs = reserved_sections(sbi); - else - old_free_secs = free_sections(sbi); + gc_type = FG_GC; - while (sbi->sb->s_flags & MS_ACTIVE) { - int i; - if (has_not_enough_free_secs(sbi)) - gc_type = FG_GC; + if (!__get_victim(sbi, &segno, gc_type, NO_CHECK_TYPE)) + goto stop; - cur_free_secs = free_sections(sbi) + nfree; - - /* We got free space successfully. */ - if (nGC < cur_free_secs - old_free_secs) + for (i = 0; i < sbi->segs_per_sec; i++) { + /* + * do_garbage_collect will give us three gc_status: + * GC_ERROR, GC_DONE, and GC_BLOCKED. + * If GC is finished uncleanly, we have to return + * the victim to dirty segment list. + */ + gc_status = do_garbage_collect(sbi, segno + i, &ilist, gc_type); + if (gc_status != GC_DONE) break; - - if (!__get_victim(sbi, &segno, gc_type, NO_CHECK_TYPE)) - break; - - for (i = 0; i < sbi->segs_per_sec; i++) { - /* - * do_garbage_collect will give us three gc_status: - * GC_ERROR, GC_DONE, and GC_BLOCKED. - * If GC is finished uncleanly, we have to return - * the victim to dirty segment list. - */ - gc_status = do_garbage_collect(sbi, segno + i, - &ilist, gc_type); - if (gc_status != GC_DONE) - goto stop; - nfree++; - } } -stop: - if (has_not_enough_free_secs(sbi) || gc_status == GC_BLOCKED) { + if (has_not_enough_free_secs(sbi)) { write_checkpoint(sbi, (gc_status == GC_BLOCKED), false); - if (nfree) + if (has_not_enough_free_secs(sbi)) goto gc_more; } +stop: mutex_unlock(&sbi->gc_mutex); put_gc_inode(&ilist); - BUG_ON(!list_empty(&ilist)); return gc_status; } diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c index de6240922b0a..4b0099066582 100644 --- a/fs/f2fs/segment.c +++ b/fs/f2fs/segment.c @@ -31,7 +31,7 @@ void f2fs_balance_fs(struct f2fs_sb_info *sbi) */ if (has_not_enough_free_secs(sbi)) { mutex_lock(&sbi->gc_mutex); - f2fs_gc(sbi, 1); + f2fs_gc(sbi); } } From 4ea931e07d7708bdf42cff31e27dcc5d307ab6f7 Mon Sep 17 00:00:00 2001 From: Simon Guinot Date: Tue, 8 Jan 2013 15:36:18 +0100 Subject: [PATCH 195/553] ARM: Kirkwood: fix ns2 gpios by converting to pinctrl Note that the pinctrl conversion also fixes GPIO support for ns2 boards. Since commit f9e75922: "ARM: Kirkwood: Make use of mvebu pincltl and gpio", the mvbu_gpio driver is used for DT boards. As mvbu_gpio relies on the pinctrl driver, then a pinctrl definition must be given to allow the GPIO configuration. Signed-off-by: Simon Guinot Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 16 +++++++++ arch/arm/mach-kirkwood/board-ns2.c | 38 ---------------------- 2 files changed, 16 insertions(+), 38 deletions(-) diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 9bc6785ad228..77d21abfcdf7 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -1,4 +1,5 @@ /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { chosen { @@ -6,6 +7,21 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0 + &pmx_ns2_sata0 &pmx_ns2_sata1>; + pinctrl-names = "default"; + + pmx_ns2_sata0: pmx-ns2-sata0 { + marvell,pins = "mpp21"; + marvell,function = "sata0"; + }; + pmx_ns2_sata1: pmx-ns2-sata1 { + marvell,pins = "mpp20"; + marvell,function = "sata1"; + }; + }; + serial@12000 { clock-frequency = <166666667>; status = "okay"; diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c index 8821720ab5a4..f4632a809f68 100644 --- a/arch/arm/mach-kirkwood/board-ns2.c +++ b/arch/arm/mach-kirkwood/board-ns2.c @@ -18,47 +18,11 @@ #include #include #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data ns2_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int ns2_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Fan speed (bit 1) */ - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, /* Red led */ - MPP14_GPIO, /* USB fuse */ - MPP16_GPIO, /* SATA 0 power */ - MPP17_GPIO, /* SATA 1 power */ - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_GPIO, /* Fan speed (bit 0) */ - MPP23_GPIO, /* Fan power */ - MPP24_GPIO, /* USB mode select */ - MPP25_GPIO, /* Fan rotation fail */ - MPP26_GPIO, /* USB device vbus */ - MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* Blue led (slow register) */ - MPP30_GPIO, /* Blue led (command register) */ - MPP31_GPIO, /* Board power off */ - MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ - MPP33_GPO, /* Fan speed (bit 2) */ - 0 -}; - #define NS2_GPIO_POWER_OFF 31 static void ns2_power_off(void) @@ -71,8 +35,6 @@ void __init ns2_init(void) /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(ns2_mpp_config); - if (of_machine_is_compatible("lacie,netspace_lite_v2") || of_machine_is_compatible("lacie,netspace_mini_v2")) ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); From a8dd2176a8e988e3744e863ac39647a6f59fa900 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 9 Jan 2013 20:54:17 -0500 Subject: [PATCH 196/553] tracing: Fix regression of trace_options file setting The latest change to allow trace options to be set on the command line also broke the trace_options file. The zeroing of the last byte of the option name that is echoed into the trace_option file was removed with the consolidation of some of the code. The compare between the option and what was written to the trace_options file fails because the string holding the data written doesn't terminate with a null character. A zero needs to be added to the end of the string copied from user space. Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index e5125677efa0..1bbfa0446507 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2899,6 +2899,8 @@ tracing_trace_options_write(struct file *filp, const char __user *ubuf, if (copy_from_user(&buf, ubuf, cnt)) return -EFAULT; + buf[cnt] = 0; + trace_set_options(buf); *ppos += cnt; From 9e1c96ed82562c05c89ee3eedee8d980e5c0d865 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Tue, 18 Dec 2012 01:24:29 +0100 Subject: [PATCH 197/553] ARM: Dove: add Cubox sdhci card detect gpio Card detect for sdhci on Cubox is connected to the wrong pin (sdio1_cd instead of sdio0_cd). With support for cd-gpios and pinctrl add the corresponding properties to DT for Cubox. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper --- arch/arm/boot/dts/dove-cubox.dts | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index fed7d3f9f431..cdee96fca6e2 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -26,10 +26,15 @@ }; &uart0 { status = "okay"; }; -&sdio0 { status = "okay"; }; &sata0 { status = "okay"; }; &i2c0 { status = "okay"; }; +&sdio0 { + status = "okay"; + /* sdio0 card detect is connected to wrong pin on CuBox */ + cd-gpios = <&gpio0 12 1>; +}; + &spi0 { status = "okay"; @@ -42,9 +47,14 @@ }; &pinctrl { - pinctrl-0 = <&pmx_gpio_18>; + pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>; pinctrl-names = "default"; + pmx_gpio_12: pmx-gpio-12 { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_gpio_18: pmx-gpio-18 { marvell,pins = "mpp18"; marvell,function = "gpio"; From 08245ad87e2970ac56987caab5cd5900563db4e1 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 31 Dec 2012 00:04:59 -0800 Subject: [PATCH 198/553] hwmon: (vexpress) Fix build error seen if CONFIG_OF_DEVICE is not set MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix: vexpress.c: In function ‘vexpress_hwmon_name_show’: vexpress.c:34:2: error: implicit declaration of function ‘of_get_property’ [-Werror=implicit-function-declaration] vexpress.c:34:27: warning: initialization makes pointer from integer without a cast [enabled by default] vexpress.c: In function ‘vexpress_hwmon_label_show’: vexpress.c:43:22: warning: initialization makes pointer from integer without a cast [enabled by default] Seen if CONFIG_OF_DEVICE is not defined. of_get_property is declared in of.h which is only included by of_device.h if CONFIG_OF_DEVICE is defined. of.h needs to be included directly. Signed-off-by: Guenter Roeck --- drivers/hwmon/vexpress.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwmon/vexpress.c b/drivers/hwmon/vexpress.c index 86d7f6d858b1..d867e6bb2be1 100644 --- a/drivers/hwmon/vexpress.c +++ b/drivers/hwmon/vexpress.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include From e8e7da23c9add6f636bcc631aeb4461ffb99f77f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 10 Jan 2013 11:19:14 +0530 Subject: [PATCH 199/553] ALSA: usb-audio: Make ebox44_table static Fixes the following sparse warning: sound/usb/mixer_quirks.c:1209:23: warning: symbol 'ebox44_table' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Takashi Iwai --- sound/usb/mixer_quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 0422b1360af3..15520de1df56 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -1206,7 +1206,7 @@ static int snd_c400_create_mixer(struct usb_mixer_interface *mixer) * are valid they presents mono controls as L and R channels of * stereo. So we provide a good mixer here. */ -struct std_mono_table ebox44_table[] = { +static struct std_mono_table ebox44_table[] = { { .unitid = 4, .control = 1, From 065380f0880dd651eb405430745926dc4747b759 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Thu, 10 Jan 2013 10:25:48 +0100 Subject: [PATCH 200/553] ALSA: hda - Add support of new codec ALC284 Added the support for a new codec ALC284, which is compatible with ALC269. Also add more codec variants to handle the SSID check properly. Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 71ae23dd7103..f5196277b6e9 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5817,6 +5817,9 @@ enum { ALC269_TYPE_ALC269VB, ALC269_TYPE_ALC269VC, ALC269_TYPE_ALC269VD, + ALC269_TYPE_ALC280, + ALC269_TYPE_ALC282, + ALC269_TYPE_ALC284, }; /* @@ -5833,10 +5836,13 @@ static int alc269_parse_auto_config(struct hda_codec *codec) switch (spec->codec_variant) { case ALC269_TYPE_ALC269VA: case ALC269_TYPE_ALC269VC: + case ALC269_TYPE_ALC280: + case ALC269_TYPE_ALC284: ssids = alc269va_ssids; break; case ALC269_TYPE_ALC269VB: case ALC269_TYPE_ALC269VD: + case ALC269_TYPE_ALC282: ssids = alc269_ssids; break; default: @@ -6400,7 +6406,8 @@ static int patch_alc269(struct hda_codec *codec) alc_auto_parse_customize_define(codec); - if (codec->vendor_id == 0x10ec0269) { + switch (codec->vendor_id) { + case 0x10ec0269: spec->codec_variant = ALC269_TYPE_ALC269VA; switch (alc_get_coef0(codec) & 0x00f0) { case 0x0010: @@ -6425,6 +6432,20 @@ static int patch_alc269(struct hda_codec *codec) goto error; spec->init_hook = alc269_fill_coef; alc269_fill_coef(codec); + break; + + case 0x10ec0280: + case 0x10ec0290: + spec->codec_variant = ALC269_TYPE_ALC280; + break; + case 0x10ec0282: + case 0x10ec0283: + spec->codec_variant = ALC269_TYPE_ALC282; + break; + case 0x10ec0284: + case 0x10ec0292: + spec->codec_variant = ALC269_TYPE_ALC284; + break; } /* automatic parse from the BIOS config */ @@ -7129,6 +7150,7 @@ static const struct hda_codec_preset snd_hda_preset_realtek[] = { { .id = 0x10ec0280, .name = "ALC280", .patch = patch_alc269 }, { .id = 0x10ec0282, .name = "ALC282", .patch = patch_alc269 }, { .id = 0x10ec0283, .name = "ALC283", .patch = patch_alc269 }, + { .id = 0x10ec0284, .name = "ALC284", .patch = patch_alc269 }, { .id = 0x10ec0290, .name = "ALC290", .patch = patch_alc269 }, { .id = 0x10ec0292, .name = "ALC292", .patch = patch_alc269 }, { .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660", From bdba0051ebcb3c6372f9cc0b2524c47cc6ce46fd Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 7 Jan 2013 16:12:31 +0000 Subject: [PATCH 201/553] arm64: vdso: remove broken, redundant sequence counting for timezones This patch is an arm64 version of ce73ec6db47a ("powerpc/vdso: Remove redundant locking in update_vsyscall_tz()"). Timezone data is not protected, so the sequence counter is not required to ensure consistency. Furthermore, having multiple paths updating the counter leads to a race between update_vsyscall and update_vsyscall_tz, so remove the timezone sequence counting from both the kernel and the vdso. Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/kernel/vdso.c | 4 ---- arch/arm64/kernel/vdso/gettimeofday.S | 2 -- 2 files changed, 6 deletions(-) diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c index c958cb84d75f..6a389dc1bd49 100644 --- a/arch/arm64/kernel/vdso.c +++ b/arch/arm64/kernel/vdso.c @@ -252,10 +252,6 @@ void update_vsyscall(struct timekeeper *tk) void update_vsyscall_tz(void) { - ++vdso_data->tb_seq_count; - smp_wmb(); vdso_data->tz_minuteswest = sys_tz.tz_minuteswest; vdso_data->tz_dsttime = sys_tz.tz_dsttime; - smp_wmb(); - ++vdso_data->tb_seq_count; } diff --git a/arch/arm64/kernel/vdso/gettimeofday.S b/arch/arm64/kernel/vdso/gettimeofday.S index 8bf658d974f9..f0a6d10b5211 100644 --- a/arch/arm64/kernel/vdso/gettimeofday.S +++ b/arch/arm64/kernel/vdso/gettimeofday.S @@ -73,8 +73,6 @@ ENTRY(__kernel_gettimeofday) /* If tz is NULL, return 0. */ cbz x1, 3f ldp w4, w5, [vdso_data, #VDSO_TZ_MINWEST] - seqcnt_read w9 - seqcnt_check w9, 1b stp w4, w5, [x1, #TZ_MINWEST] 3: mov x0, xzr From 02522463c84748b3b8ad770f9424bcfa70a5b4c4 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 9 Jan 2013 11:08:10 +0000 Subject: [PATCH 202/553] arm64: mm: only wrprotect clean ptes if they are present Marking non-present ptes as read-only can corrupt file ptes, breaking things like swap and file mappings. This patch ensures that we only manipulate user pte bits when the pte is marked present. Cc: Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/pgtable.h | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 64b133949502..7adf4142a85c 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -132,9 +132,8 @@ extern struct page *empty_zero_page; #define pte_write(pte) (!(pte_val(pte) & PTE_RDONLY)) #define pte_exec(pte) (!(pte_val(pte) & PTE_UXN)) -#define pte_present_exec_user(pte) \ - ((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == \ - (PTE_VALID | PTE_USER)) +#define pte_present_user(pte) \ + ((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER)) #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } @@ -157,10 +156,13 @@ extern void __sync_icache_dcache(pte_t pteval, unsigned long addr); static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) { - if (pte_present_exec_user(pte)) - __sync_icache_dcache(pte, addr); - if (!pte_dirty(pte)) - pte = pte_wrprotect(pte); + if (pte_present_user(pte)) { + if (pte_exec(pte)) + __sync_icache_dcache(pte, addr); + if (!pte_dirty(pte)) + pte = pte_wrprotect(pte); + } + set_pte(ptep, pte); } From a6fadf7e67d3794aae40244f435d281a62736c93 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 18 Dec 2012 14:15:15 +0000 Subject: [PATCH 203/553] arm64: mm: introduce present, faulting entries for PAGE_NONE This is mostly a port of dbf62d50067e ("ARM: mm: introduce L_PTE_VALID for page table entries") and 26ffd0d43b18 ("ARM: mm: introduce present, faulting entries for PAGE_NONE") from ARM, which makes use of present, faulting page table entries for page table entries mapped as PROT_NONE. The main difference with this implementation is that we can make use of the two pte type bits in order to avoid allocating a software bit for identifying PROT_NONE pages, instead reserving the 10b suffix for these types of mappings. This is required to prevent users from accessing such pages via syscalls such as read/write over a pipe. Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/pgtable.h | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 7adf4142a85c..e333a243bfcc 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -24,7 +24,8 @@ /* * Software defined PTE bits definition. */ -#define PTE_VALID (_AT(pteval_t, 1) << 0) /* pte_present() check */ +#define PTE_VALID (_AT(pteval_t, 1) << 0) +#define PTE_PROT_NONE (_AT(pteval_t, 1) << 1) /* only when !PTE_VALID */ #define PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !pte_present() */ #define PTE_DIRTY (_AT(pteval_t, 1) << 55) #define PTE_SPECIAL (_AT(pteval_t, 1) << 56) @@ -60,9 +61,12 @@ extern void __pgd_error(const char *file, int line, unsigned long val); extern pgprot_t pgprot_default; -#define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b)) +#define __pgprot_modify(prot,mask,bits) \ + __pgprot((pgprot_val(prot) & ~(mask)) | (bits)) -#define PAGE_NONE _MOD_PROT(pgprot_default, PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY) +#define _MOD_PROT(p, b) __pgprot_modify(p, 0, b) + +#define PAGE_NONE __pgprot_modify(pgprot_default, PTE_TYPE_MASK, PTE_PROT_NONE) #define PAGE_SHARED _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN) #define PAGE_SHARED_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN) #define PAGE_COPY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY) @@ -72,7 +76,7 @@ extern pgprot_t pgprot_default; #define PAGE_KERNEL _MOD_PROT(pgprot_default, PTE_PXN | PTE_UXN | PTE_DIRTY) #define PAGE_KERNEL_EXEC _MOD_PROT(pgprot_default, PTE_UXN | PTE_DIRTY) -#define __PAGE_NONE __pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY) +#define __PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_TYPE_MASK) | PTE_PROT_NONE) #define __PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN) #define __PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN) #define __PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY) @@ -125,14 +129,14 @@ extern struct page *empty_zero_page; /* * The following only work if pte_present(). Undefined behaviour otherwise. */ -#define pte_present(pte) (pte_val(pte) & PTE_VALID) +#define pte_present(pte) (pte_val(pte) & (PTE_VALID | PTE_PROT_NONE)) #define pte_dirty(pte) (pte_val(pte) & PTE_DIRTY) #define pte_young(pte) (pte_val(pte) & PTE_AF) #define pte_special(pte) (pte_val(pte) & PTE_SPECIAL) #define pte_write(pte) (!(pte_val(pte) & PTE_RDONLY)) #define pte_exec(pte) (!(pte_val(pte) & PTE_UXN)) -#define pte_present_user(pte) \ +#define pte_valid_user(pte) \ ((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER)) #define PTE_BIT_FUNC(fn,op) \ @@ -156,7 +160,7 @@ extern void __sync_icache_dcache(pte_t pteval, unsigned long addr); static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) { - if (pte_present_user(pte)) { + if (pte_valid_user(pte)) { if (pte_exec(pte)) __sync_icache_dcache(pte, addr); if (!pte_dirty(pte)) @@ -172,9 +176,6 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, #define pte_huge(pte) ((pte_val(pte) & PTE_TYPE_MASK) == PTE_TYPE_HUGEPAGE) #define pte_mkhuge(pte) (__pte((pte_val(pte) & ~PTE_TYPE_MASK) | PTE_TYPE_HUGEPAGE)) -#define __pgprot_modify(prot,mask,bits) \ - __pgprot((pgprot_val(prot) & ~(mask)) | (bits)) - #define __HAVE_ARCH_PTE_SPECIAL /* @@ -266,7 +267,8 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr) static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { - const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY; + const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY | + PTE_PROT_NONE | PTE_VALID; pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); return pte; } From 9b89cb8172f2ddd5a0aab74f20155036065956ac Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Wed, 2 Jan 2013 14:23:38 -0800 Subject: [PATCH 204/553] gpio: samsung: remove inclusion The is not needed for gpio-samsung. Cc: Linus Walleij Cc: Grant Likely Signed-off-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/gpio/gpio-samsung.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 01f7fe955590..9070f8632002 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -32,7 +32,6 @@ #include #include -#include #include #include From a706d965dcfdff73bf2bad1c300f8119900714c7 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Fri, 28 Dec 2012 19:56:07 -0700 Subject: [PATCH 205/553] perf x86: revert 20b279 - require exclude_guest to use PEBS - kernel side This patch is brought to you by the letter 'H'. Commit 20b279 breaks compatiblity with older perf binaries when run with precise modifier (:p or :pp) by requiring the exclude_guest attribute to be set. Older binaries default exclude_guest to 0 (ie., wanting guest-based samples) unless host only profiling is requested (:H modifier). The workaround for older binaries is to add H to the modifier list (e.g., -e cycles:ppH - toggles exclude_guest to 1). This was deemed unacceptable by Linus: https://lkml.org/lkml/2012/12/12/570 Between family in town and the fresh snow in Breckenridge there is no time left to be working on the proper fix for this over the holidays. In the New Year I have more pressing problems to resolve -- like some memory leaks in perf which are proving to be elusive -- although the aforementioned snow is probably why they are proving to be elusive. Either way I do not have any spare time to work on this and from the time I have managed to spend on it the solution is more difficult than just moving to a new exclude_guest flag (does not work) or flipping the logic to include_guest (which is not as trivial as one would think). So, two options: silently force exclude_guest on as suggested by Gleb which means no impact to older perf binaries or revert the original patch which caused the breakage. This patch does the latter -- reverts the original patch that introduced the regression. The problem can be revisited in the future as time allows. Signed-off-by: David Ahern Cc: Avi Kivity Cc: Gleb Natapov Cc: Ingo Molnar Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Robert Richter Link: http://lkml.kernel.org/r/1356749767-17322-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- arch/x86/kernel/cpu/perf_event.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 4428fd178bce..6774c17a5576 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -340,9 +340,6 @@ int x86_setup_perfctr(struct perf_event *event) /* BTS is currently only allowed for user-mode. */ if (!attr->exclude_kernel) return -EOPNOTSUPP; - - if (!attr->exclude_guest) - return -EOPNOTSUPP; } hwc->config |= config; @@ -385,9 +382,6 @@ int x86_pmu_hw_config(struct perf_event *event) if (event->attr.precise_ip) { int precise = 0; - if (!event->attr.exclude_guest) - return -EOPNOTSUPP; - /* Support for constant skid */ if (x86_pmu.pebs_active && !x86_pmu.pebs_broken) { precise++; From 81d0a6ae7befb24c06f4aa4856af7f8d1f612171 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 9 Jan 2013 19:34:57 +0800 Subject: [PATCH 206/553] regulator: max8998: Ensure enough delay time for max8998_set_voltage_buck_time_sel Use DIV_ROUND_UP to prevent truncation by integer division issue. This ensures we return enough delay time. Signed-off-by: Axel Lin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/max8998.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index 06be8cc7aadf..1f0df4046b86 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -447,7 +447,7 @@ static int max8998_set_voltage_buck_time_sel(struct regulator_dev *rdev, difference = (new_selector - old_selector) * desc->step / 1000; if (difference > 0) - return difference / ((val & 0x0f) + 1); + return DIV_ROUND_UP(difference, (val & 0x0f) + 1); return 0; } From 93927ca52a55c23e0a6a305e7e9082e8411ac9fa Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 10 Jan 2013 18:03:00 +0100 Subject: [PATCH 207/553] drm/i915: Revert shrinker changes from "Track unbound pages" This partially reverts commit 6c085a728cf000ac1865d66f8c9b52935558b328 Author: Chris Wilson Date: Mon Aug 20 11:40:46 2012 +0200 drm/i915: Track unbound pages Closer inspection of that patch revealed a bunch of unrelated changes in the shrinker: - The shrinker count is now in pages instead of objects. - For counting the shrinkable objects the old code only looked at the inactive list, the new code looks at all bounds objects (including pinned ones). That is obviously in addition to the new unbound list. - The shrinker cound is no longer scaled with sysctl_vfs_cache_pressure. Note though that with the default tuning value of vfs_cache_pressue = 100 this doesn't affect the shrinker behaviour. - When actually shrinking objects, the old code first dropped purgeable objects, then normal (inactive) objects. Only then did it, in a last-ditch effort idle the gpu and evict everything. The new code omits the intermediate step of evicting normal inactive objects. Safe for the first change, which seems benign, and the shrinker count scaling, which is a bit a different story, the endresult of all these changes is that the shrinker is _much_ more likely to fall back to the last-ditch resort of idling the gpu and evicting everything. The old code could only do that if something else evicted lots of objects meanwhile (since without any other changes the nr_to_scan will be smaller than the object count). Reverting the vfs_cache_pressure behaviour itself is a bit bogus: Only dentry/inode object caches should scale their shrinker counts with vfs_cache_pressure. Originally I've had that change reverted, too. But Chris Wilson insisted that it's too bogus and shouldn't again see the light of day. Hence revert all these other changes and restore the old shrinker behaviour, with the minor adjustment that we now first scan the unbound list, then the inactive list for each object category (purgeable or normal). A similar patch has been tested by a few people affected by the gen4/5 hangs which started to appear in 3.7, which some people bisected to the "drm/i915: Track unbound pages" commit. But just disabling the unbound logic alone didn't change things at all. Note that this patch doesn't fix the referenced bugs, it only hides the underlying bug(s) well enough to restore pre-3.7 behaviour. The key to achieve that is to massively reduce the likelyhood of going into a full gpu stall and evicting everything. v2: Reword commit message a bit, taking Chris Wilson's comment into account. v3: On Chris Wilson's insistency, do not reinstate the rather bogus vfs_cache_pressure change. Tested-by: Greg KH Tested-by: Dave Kleikamp References: https://bugs.freedesktop.org/show_bug.cgi?id=55984 References: https://bugs.freedesktop.org/show_bug.cgi?id=57122 References: https://bugs.freedesktop.org/show_bug.cgi?id=56916 References: https://bugs.freedesktop.org/show_bug.cgi?id=57136 Cc: Chris Wilson Cc: stable@vger.kernel.org Acked-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 5791ecd908a5..8febea6daa08 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1717,7 +1717,8 @@ i915_gem_object_put_pages(struct drm_i915_gem_object *obj) } static long -i915_gem_purge(struct drm_i915_private *dev_priv, long target) +__i915_gem_shrink(struct drm_i915_private *dev_priv, long target, + bool purgeable_only) { struct drm_i915_gem_object *obj, *next; long count = 0; @@ -1725,7 +1726,7 @@ i915_gem_purge(struct drm_i915_private *dev_priv, long target) list_for_each_entry_safe(obj, next, &dev_priv->mm.unbound_list, gtt_list) { - if (i915_gem_object_is_purgeable(obj) && + if ((i915_gem_object_is_purgeable(obj) || !purgeable_only) && i915_gem_object_put_pages(obj) == 0) { count += obj->base.size >> PAGE_SHIFT; if (count >= target) @@ -1736,7 +1737,7 @@ i915_gem_purge(struct drm_i915_private *dev_priv, long target) list_for_each_entry_safe(obj, next, &dev_priv->mm.inactive_list, mm_list) { - if (i915_gem_object_is_purgeable(obj) && + if ((i915_gem_object_is_purgeable(obj) || !purgeable_only) && i915_gem_object_unbind(obj) == 0 && i915_gem_object_put_pages(obj) == 0) { count += obj->base.size >> PAGE_SHIFT; @@ -1748,6 +1749,12 @@ i915_gem_purge(struct drm_i915_private *dev_priv, long target) return count; } +static long +i915_gem_purge(struct drm_i915_private *dev_priv, long target) +{ + return __i915_gem_shrink(dev_priv, target, true); +} + static void i915_gem_shrink_all(struct drm_i915_private *dev_priv) { @@ -4395,6 +4402,9 @@ i915_gem_inactive_shrink(struct shrinker *shrinker, struct shrink_control *sc) if (nr_to_scan) { nr_to_scan -= i915_gem_purge(dev_priv, nr_to_scan); + if (nr_to_scan > 0) + nr_to_scan -= __i915_gem_shrink(dev_priv, nr_to_scan, + false); if (nr_to_scan > 0) i915_gem_shrink_all(dev_priv); } @@ -4403,7 +4413,7 @@ i915_gem_inactive_shrink(struct shrinker *shrinker, struct shrink_control *sc) list_for_each_entry(obj, &dev_priv->mm.unbound_list, gtt_list) if (obj->pages_pin_count == 0) cnt += obj->base.size >> PAGE_SHIFT; - list_for_each_entry(obj, &dev_priv->mm.bound_list, gtt_list) + list_for_each_entry(obj, &dev_priv->mm.inactive_list, gtt_list) if (obj->pin_count == 0 && obj->pages_pin_count == 0) cnt += obj->base.size >> PAGE_SHIFT; From 54b956b903607f8f8878754dd4352da6a54a1da2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 10 Jan 2013 10:57:01 -0800 Subject: [PATCH 208/553] Remove __dev* markings from init.h Now that all in-kernel users of __dev* are gone, let's remove them from init.h to keep them from popping up again and again. Thanks to Bill Pemberton for doing all of the hard work to make removal of this possible. Cc: Bill Pemberton Cc: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman --- include/linux/init.h | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/include/linux/init.h b/include/linux/init.h index a799273714ac..10ed4f436458 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -93,14 +93,6 @@ #define __exit __section(.exit.text) __exitused __cold notrace -/* Used for HOTPLUG, but that is always enabled now, so just make them noops */ -#define __devinit -#define __devinitdata -#define __devinitconst -#define __devexit -#define __devexitdata -#define __devexitconst - /* Used for HOTPLUG_CPU */ #define __cpuinit __section(.cpuinit.text) __cold notrace #define __cpuinitdata __section(.cpuinit.data) @@ -337,18 +329,6 @@ void __init parse_early_options(char *cmdline); #define __INITRODATA_OR_MODULE __INITRODATA #endif /*CONFIG_MODULES*/ -/* Functions marked as __devexit may be discarded at kernel link time, depending - on config options. Newer versions of binutils detect references from - retained sections to discarded sections and flag an error. Pointers to - __devexit functions must use __devexit_p(function_name), the wrapper will - insert either the function_name or NULL, depending on the config options. - */ -#if defined(MODULE) || defined(CONFIG_HOTPLUG) -#define __devexit_p(x) x -#else -#define __devexit_p(x) NULL -#endif - #ifdef MODULE #define __exit_p(x) x #else From acb8fb04b74e1c26117b89945dc058b52b28ccb9 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 8 Jan 2013 15:08:54 +0100 Subject: [PATCH 209/553] perf tools: Fix building from 'make perf-*-src-pkg' tarballs Thanks (mostly) to uapi the package created from perf-*-src-pkg FTBFS: | CC perf.o |In file included from util/../perf.h:8:0, | from util/cache.h:7, | from perf.c:12: |arch/x86/include/asm/unistd.h:4:29: fatal error: uapi/asm/unistd.h: No such file or directory | | CC perf.o |In file included from util/../perf.h:106:0, | from util/cache.h:7, | from perf.c:12: |include/linux/perf_event.h:17:35: fatal error: uapi/linux/perf_event.h: No such file or directory | | CC perf.o |In file included from include/uapi/linux/perf_event.h:19:0, | from util/../perf.h:106, | from util/cache.h:7, | from perf.c:12: |util/include/asm/byteorder.h:2:49: fatal error: ../../../../include/uapi/linux/swab.h: No such file or directory | | CC perf.o |In file included from util/include/../../../../include/linux/list.h:7:0, | from util/include/linux/list.h:4, | from util/parse-events.h:7, | from perf.c:15: |util/include/linux/const.h:1:50: fatal error: ../../../../include/uapi/linux/const.h: No such file or directory | |In file included from builtin-kvm.c:26:0: |arch/x86/include/asm/svm.h:4:26: fatal error: uapi/asm/svm.h: No such file or directory | |In file included from util/evsel.c:21:0: |include/linux/hw_breakpoint.h:5:38: fatal error: uapi/linux/hw_breakpoint.h: No such file or directory | | CC util/evsel.o |In file included from util/perf_regs.h:5:0, | from util/evsel.c:23: |arch/x86/include/perf_regs.h:6:27: fatal error: asm/perf_regs.h: No such file or directory | | CC util/rbtree.o |In file included from ../../lib/rbtree.c:24:0: |util/include/linux/rbtree_augmented.h:2:56: fatal error: ../../../../include/linux/rbtree_augmented.h: No such file or directory This patch adds the missing files. Signed-off-by: Sebastian Andrzej Siewior Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1357654134-28538-1-git-send-email-bigeasy@linutronix.de Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/MANIFEST | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/tools/perf/MANIFEST b/tools/perf/MANIFEST index 80db3f4bcf7a..39d41068484f 100644 --- a/tools/perf/MANIFEST +++ b/tools/perf/MANIFEST @@ -11,11 +11,21 @@ lib/rbtree.c include/linux/swab.h arch/*/include/asm/unistd*.h arch/*/include/asm/perf_regs.h +arch/*/include/uapi/asm/unistd*.h +arch/*/include/uapi/asm/perf_regs.h arch/*/lib/memcpy*.S arch/*/lib/memset*.S include/linux/poison.h include/linux/magic.h include/linux/hw_breakpoint.h +include/linux/rbtree_augmented.h +include/uapi/linux/perf_event.h +include/uapi/linux/const.h +include/uapi/linux/swab.h +include/uapi/linux/hw_breakpoint.h arch/x86/include/asm/svm.h arch/x86/include/asm/vmx.h arch/x86/include/asm/kvm_host.h +arch/x86/include/uapi/asm/svm.h +arch/x86/include/uapi/asm/vmx.h +arch/x86/include/uapi/asm/kvm.h From 11d5993df2e1f65e3acfeb92a3febe88803b3e7f Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Thu, 10 Jan 2013 13:15:14 +0100 Subject: [PATCH 210/553] arm: mvebu: Fix memory size for Armada 370 DB Actually the Armada 370 DB (aka DB-88F6710-BP-DDR3) come with 1GB and not 512MB. Signed-off-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-db.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 00044026ef1f..9b82facb2561 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -26,7 +26,7 @@ memory { device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MB */ + reg = <0x00000000 0x40000000>; /* 1 GB */ }; soc { From 83987ace22f541964bd0dbf83a3f6b0014ba3e1e Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Tue, 8 Jan 2013 16:23:10 +0100 Subject: [PATCH 211/553] s390/kvm: Fix BUG in include/linux/kvm_host.h:745 commit b080935c8638e08134629d0a9ebdf35669bec14d kvm: Directly account vtime to system on guest switch also removed the irq_disable/enable around kvm guest switch, which is correct in itself. Unfortunately, there is a BUG ON that (correctly) checks for preemptible to cover the call to rcu later on. (Introduced with commit 8fa2206821953a50a3a02ea33fcfb3ced2fd9997 KVM: make guest mode entry to be rcu quiescent state) This check might trigger depending on the kernel config. Lets make sure that no preemption happens during kvm_guest_enter. We can enable preemption again after the call to rcu_virt_note_context_switch returns. Please note that we continue to run s390 guests with interrupts enabled. Acked-by: Frederic Weisbecker CC: Gleb Natapov Signed-off-by: Christian Borntraeger Signed-off-by: Marcelo Tosatti --- arch/s390/kvm/kvm-s390.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index c9011bfaabbe..f090e819bf71 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -613,7 +613,9 @@ static int __vcpu_run(struct kvm_vcpu *vcpu) kvm_s390_deliver_pending_interrupts(vcpu); vcpu->arch.sie_block->icptcode = 0; + preempt_disable(); kvm_guest_enter(); + preempt_enable(); VCPU_EVENT(vcpu, 6, "entering sie flags %x", atomic_read(&vcpu->arch.sie_block->cpuflags)); trace_kvm_s390_sie_enter(vcpu, From a4a12e008e292a81d312659529b71be2026ab355 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Fri, 30 Nov 2012 11:56:05 +0000 Subject: [PATCH 212/553] ARM: virt: Avoid bx instruction for compatibility with <=ARMv4 Non-T variants of ARMv4 do not support the bx instruction. However, __hyp_stub_install is always called from the same instruction set used to build the bulk of the kernel, so bx should not be necessary. This patch uses the traditional "mov pc" instead of bx. Cc: Signed-off-by: Dave Martin [will: fixed up remaining bx instruction] Signed-off-by: Will Deacon --- arch/arm/kernel/hyp-stub.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 65b2417aebce..3c60256d3927 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -99,7 +99,7 @@ ENTRY(__hyp_stub_install_secondary) * immediately. */ compare_cpu_mode_with_primary r4, r5, r6, r7 - bxne lr + movne pc, lr /* * Once we have given up on one CPU, we do not try to install the @@ -111,7 +111,7 @@ ENTRY(__hyp_stub_install_secondary) */ cmp r4, #HYP_MODE - bxne lr @ give up if the CPU is not in HYP mode + movne pc, lr @ give up if the CPU is not in HYP mode /* * Configure HSCTLR to set correct exception endianness/instruction set @@ -200,7 +200,7 @@ ENDPROC(__hyp_get_vectors) @ fall through ENTRY(__hyp_set_vectors) __HVC(0) - bx lr + mov pc, lr ENDPROC(__hyp_set_vectors) #ifndef ZIMAGE From 6e484be1ccca3ea495db45900fd42aac8d49d754 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 4 Jan 2013 17:44:14 +0000 Subject: [PATCH 213/553] ARM: virt: boot secondary CPUs through the right entry point Secondary CPUs should use the __hyp_stub_install_secondary entry point, so boot mode inconsistencies can be detected. Cc: Acked-by: Dave Martin Reported-by: Ian Molton Signed-off-by: Marc Zyngier Signed-off-by: Will Deacon --- arch/arm/kernel/head.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 4eee351f4668..16abc8322f79 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -331,7 +331,7 @@ ENTRY(secondary_startup) * as it has already been validated by the primary processor. */ #ifdef CONFIG_ARM_VIRT_EXT - bl __hyp_stub_install + bl __hyp_stub_install_secondary #endif safe_svcmode_maskall r9 From d01723479e6a6c70c83295f7847477a016d5e14a Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 4 Jan 2013 17:44:15 +0000 Subject: [PATCH 214/553] ARM: virt: simplify __hyp_stub_install epilog __hyp_stub_install duplicates quite a bit of safe_svcmode_maskall by forcing the CPU back to SVC. This is unnecessary, as safe_svcmode_maskall is called just after. Furthermore, the way we build SPSR_hyp is buggy as we fail to mask the interrupts, leading to interesting behaviours on TC2 + UEFI. The fix is to simply remove this code and rely on safe_svcmode_maskall to do the right thing. Cc: Reviewed-by: Dave Martin Reported-by: Harry Liebel Signed-off-by: Marc Zyngier Signed-off-by: Will Deacon --- arch/arm/kernel/hyp-stub.S | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 3c60256d3927..1315c4ccfa56 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -120,7 +120,8 @@ ENTRY(__hyp_stub_install_secondary) * Eventually, CPU-specific code might be needed -- assume not for now * * This code relies on the "eret" instruction to synchronize the - * various coprocessor accesses. + * various coprocessor accesses. This is done when we switch to SVC + * (see safe_svcmode_maskall). */ @ Now install the hypervisor stub: adr r7, __hyp_stub_vectors @@ -155,14 +156,7 @@ THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE 1: #endif - bic r7, r4, #MODE_MASK - orr r7, r7, #SVC_MODE -THUMB( orr r7, r7, #PSR_T_BIT ) - msr spsr_cxsf, r7 @ This is SPSR_hyp. - - __MSR_ELR_HYP(14) @ msr elr_hyp, lr - __ERET @ return, switching to SVC mode - @ The boot CPU mode is left in r4. + bx lr @ The boot CPU mode is left in r4. ENDPROC(__hyp_stub_install_secondary) __hyp_stub_do_trap: From ff4bd0827764e10a428a9d39e6814c5478863f94 Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Mon, 7 Jan 2013 18:21:57 -0500 Subject: [PATCH 215/553] drm/radeon: fix NULL pointer dereference in UMS mode In UMS mode parser->rdev is NULL, so dereferencing will cause an oops. Signed-off-by: Ilija Hadzic Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_cs.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index 396baba0141a..45151c49ce81 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -279,7 +279,7 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) p->chunks[p->chunk_ib_idx].length_dw); return -EINVAL; } - if ((p->rdev->flags & RADEON_IS_AGP)) { + if (p->rdev && (p->rdev->flags & RADEON_IS_AGP)) { p->chunks[p->chunk_ib_idx].kpage[0] = kmalloc(PAGE_SIZE, GFP_KERNEL); p->chunks[p->chunk_ib_idx].kpage[1] = kmalloc(PAGE_SIZE, GFP_KERNEL); if (p->chunks[p->chunk_ib_idx].kpage[0] == NULL || @@ -583,7 +583,8 @@ static int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx) struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx]; int i; int size = PAGE_SIZE; - bool copy1 = (p->rdev->flags & RADEON_IS_AGP) ? false : true; + bool copy1 = (p->rdev && (p->rdev->flags & RADEON_IS_AGP)) ? + false : true; for (i = ibc->last_copied_page + 1; i < pg_idx; i++) { if (DRM_COPY_FROM_USER(p->ib.ptr + (i * (PAGE_SIZE/4)), From a6b7e1a02b77ab8fe8775d20a88c53d8ba55482e Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Mon, 7 Jan 2013 18:21:58 -0500 Subject: [PATCH 216/553] drm/radeon: fix a bogus kfree parser->chunks[.].kpage[.] is not always kmalloc-ed by the parser initialization, so parser_fini should not try to kfree it if it didn't allocate it. This patch fixes a kernel oops that can be provoked in UMS mode. Signed-off-by: Ilija Hadzic Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_cs.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 03191a56eb44..6858a4068f7b 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -2476,8 +2476,10 @@ static void r600_cs_parser_fini(struct radeon_cs_parser *parser, int error) kfree(parser->relocs); for (i = 0; i < parser->nchunks; i++) { kfree(parser->chunks[i].kdata); - kfree(parser->chunks[i].kpage[0]); - kfree(parser->chunks[i].kpage[1]); + if (parser->rdev && (parser->rdev->flags & RADEON_IS_AGP)) { + kfree(parser->chunks[i].kpage[0]); + kfree(parser->chunks[i].kpage[1]); + } } kfree(parser->chunks); kfree(parser->chunks_array); From 25d8999780f8c1f53928f4a24a09c01550423109 Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Mon, 7 Jan 2013 18:21:59 -0500 Subject: [PATCH 217/553] drm/radeon: fix error path in kpage allocation Index into chunks[] array doesn't look right. Signed-off-by: Ilija Hadzic Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_cs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index 45151c49ce81..469661fd1903 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -284,8 +284,8 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) p->chunks[p->chunk_ib_idx].kpage[1] = kmalloc(PAGE_SIZE, GFP_KERNEL); if (p->chunks[p->chunk_ib_idx].kpage[0] == NULL || p->chunks[p->chunk_ib_idx].kpage[1] == NULL) { - kfree(p->chunks[i].kpage[0]); - kfree(p->chunks[i].kpage[1]); + kfree(p->chunks[p->chunk_ib_idx].kpage[0]); + kfree(p->chunks[p->chunk_ib_idx].kpage[1]); return -ENOMEM; } } From 51861d4eebc2ddc25c77084343d060fa79f6e291 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Tue, 8 Jan 2013 18:41:01 -0500 Subject: [PATCH 218/553] radeon/kms: force rn50 chip to always report connected on analog output Those rn50 chip are often connected to console remoting hw and load detection often fails with those. Just don't try to load detect and report connect. Signed-off-by: Jerome Glisse Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index f5ba2241dacc..62cd512f5c8d 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -640,6 +640,14 @@ static enum drm_connector_status radeon_legacy_primary_dac_detect(struct drm_enc enum drm_connector_status found = connector_status_disconnected; bool color = true; + /* just don't bother on RN50 those chip are often connected to remoting + * console hw and often we get failure to load detect those. So to make + * everyone happy report the encoder as always connected. + */ + if (ASIC_IS_RN50(rdev)) { + return connector_status_connected; + } + /* save the regs we need */ vclk_ecp_cntl = RREG32_PLL(RADEON_VCLK_ECP_CNTL); crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL); From 9305ede6afe2998b391cd225e02a18f37d62028e Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Wed, 9 Jan 2013 16:40:42 -0500 Subject: [PATCH 219/553] radeon/kms: fix dma relocation checking We were checking the index against the size of the relocation buffer instead of against the last index. This fix kernel segfault when userspace submit ill formated command stream/relocation buffer pair. Signed-off-by: Jerome Glisse Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_cs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 6858a4068f7b..69ec24ab8d63 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -2563,16 +2563,16 @@ int r600_dma_cs_next_reloc(struct radeon_cs_parser *p, struct radeon_cs_chunk *relocs_chunk; unsigned idx; + *cs_reloc = NULL; if (p->chunk_relocs_idx == -1) { DRM_ERROR("No relocation chunk !\n"); return -EINVAL; } - *cs_reloc = NULL; relocs_chunk = &p->chunks[p->chunk_relocs_idx]; idx = p->dma_reloc_idx; - if (idx >= relocs_chunk->length_dw) { + if (idx >= p->nrelocs) { DRM_ERROR("Relocs at %d after relocations chunk end %d !\n", - idx, relocs_chunk->length_dw); + idx, p->nrelocs); return -EINVAL; } *cs_reloc = p->relocs_ptr[idx]; From ff905b1e4aad8ccbbb0d42f7137f19482742ff07 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 10 Jan 2013 07:06:10 +0000 Subject: [PATCH 220/553] tcp: splice: fix an infinite loop in tcp_read_sock() commit 02275a2ee7c0 (tcp: don't abort splice() after small transfers) added a regression. [ 83.843570] INFO: rcu_sched self-detected stall on CPU [ 83.844575] INFO: rcu_sched detected stalls on CPUs/tasks: { 6} (detected by 0, t=21002 jiffies, g=4457, c=4456, q=13132) [ 83.844582] Task dump for CPU 6: [ 83.844584] netperf R running task 0 8966 8952 0x0000000c [ 83.844587] 0000000000000000 0000000000000006 0000000000006c6c 0000000000000000 [ 83.844589] 000000000000006c 0000000000000096 ffffffff819ce2bc ffffffffffffff10 [ 83.844592] ffffffff81088679 0000000000000010 0000000000000246 ffff880c4b9ddcd8 [ 83.844594] Call Trace: [ 83.844596] [] ? vprintk_emit+0x1c9/0x4c0 [ 83.844601] [] ? schedule+0x29/0x70 [ 83.844606] [] ? tcp_splice_data_recv+0x42/0x50 [ 83.844610] [] ? tcp_read_sock+0xda/0x260 [ 83.844613] [] ? tcp_prequeue_process+0xb0/0xb0 [ 83.844615] [] ? tcp_splice_read+0xc0/0x250 [ 83.844618] [] ? sock_splice_read+0x22/0x30 [ 83.844622] [] ? do_splice_to+0x7b/0xa0 [ 83.844627] [] ? sys_splice+0x59c/0x5d0 [ 83.844630] [] ? putname+0x2b/0x40 [ 83.844633] [] ? do_sys_open+0x174/0x1e0 [ 83.844636] [] ? system_call_fastpath+0x16/0x1b if recv_actor() returns 0, we should stop immediately, because looping wont give a chance to drain the pipe. Signed-off-by: Eric Dumazet Cc: Willy Tarreau Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 1ca253635f7a..5f173dccd1e9 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1482,7 +1482,7 @@ int tcp_read_sock(struct sock *sk, read_descriptor_t *desc, break; } used = recv_actor(desc, skb, offset, len); - if (used < 0) { + if (used <= 0) { if (!copied) copied = used; break; From f26845b43c75d3f32f98d194c1327b5b1e6b3fb0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 9 Jan 2013 20:59:09 +0000 Subject: [PATCH 221/553] tcp: fix splice() and tcp collapsing interaction Under unusual circumstances, TCP collapse can split a big GRO TCP packet while its being used in a splice(socket->pipe) operation. skb_splice_bits() releases the socket lock before calling splice_to_pipe(). [ 1081.353685] WARNING: at net/ipv4/tcp.c:1330 tcp_cleanup_rbuf+0x4d/0xfc() [ 1081.371956] Hardware name: System x3690 X5 -[7148Z68]- [ 1081.391820] cleanup rbuf bug: copied AD3BCF1 seq AD370AF rcvnxt AD3CF13 To fix this problem, we must eat skbs in tcp_recv_skb(). Remove the inline keyword from tcp_recv_skb() definition since it has three call sites. Reported-by: Christian Becker Cc: Willy Tarreau Signed-off-by: Eric Dumazet Tested-by: Willy Tarreau Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 5f173dccd1e9..2aa69c8ae60c 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1428,12 +1428,12 @@ static void tcp_service_net_dma(struct sock *sk, bool wait) } #endif -static inline struct sk_buff *tcp_recv_skb(struct sock *sk, u32 seq, u32 *off) +static struct sk_buff *tcp_recv_skb(struct sock *sk, u32 seq, u32 *off) { struct sk_buff *skb; u32 offset; - skb_queue_walk(&sk->sk_receive_queue, skb) { + while ((skb = skb_peek(&sk->sk_receive_queue)) != NULL) { offset = seq - TCP_SKB_CB(skb)->seq; if (tcp_hdr(skb)->syn) offset--; @@ -1441,6 +1441,11 @@ static inline struct sk_buff *tcp_recv_skb(struct sock *sk, u32 seq, u32 *off) *off = offset; return skb; } + /* This looks weird, but this can happen if TCP collapsing + * splitted a fat GRO packet, while we released socket lock + * in skb_splice_bits() + */ + sk_eat_skb(sk, skb, false); } return NULL; } @@ -1520,8 +1525,10 @@ int tcp_read_sock(struct sock *sk, read_descriptor_t *desc, tcp_rcv_space_adjust(sk); /* Clean up data we have read: This will do ACK frames. */ - if (copied > 0) + if (copied > 0) { + tcp_recv_skb(sk, seq, &offset); tcp_cleanup_rbuf(sk, copied); + } return copied; } EXPORT_SYMBOL(tcp_read_sock); From 85da53bf1c336bb07ac038fb951403ab0478d2c5 Mon Sep 17 00:00:00 2001 From: Romain Kuntz Date: Wed, 9 Jan 2013 15:02:26 +0100 Subject: [PATCH 222/553] ipv6: fix the noflags test in addrconf_get_prefix_route The tests on the flags in addrconf_get_prefix_route() does no make much sense: the 'noflags' parameter contains the set of flags that must not match with the route flags, so the test must be done against 'noflags', and not against 'flags'. Signed-off-by: Romain Kuntz Acked-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 408cac4ae00a..29ba4ff186eb 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1877,7 +1877,7 @@ static struct rt6_info *addrconf_get_prefix_route(const struct in6_addr *pfx, continue; if ((rt->rt6i_flags & flags) != flags) continue; - if ((noflags != 0) && ((rt->rt6i_flags & flags) != 0)) + if ((rt->rt6i_flags & noflags) != 0) continue; dst_hold(&rt->dst); break; From 21caa6622b36190a32b19dfa734822c2eb93e1fd Mon Sep 17 00:00:00 2001 From: Romain Kuntz Date: Wed, 9 Jan 2013 21:06:03 +0000 Subject: [PATCH 223/553] ipv6: use addrconf_get_prefix_route for prefix route lookup [v2] Replace ip6_route_lookup() with addrconf_get_prefix_route() when looking up for a prefix route. This ensures that the connected prefix is looked up in the main table, and avoids the selection of other matching routes located in different tables as well as blackhole or prohibited entries. In addition, this fixes an Opps introduced by commit 64c6d08e (ipv6: del unreachable route when an addr is deleted on lo), that would occur when a blackhole or prohibited entry is selected by ip6_route_lookup(). Such entries have a NULL rt6i_table argument, which is accessed by __ip6_del_rt() when trying to lock rt6i_table->tb6_lock. The function addrconf_is_prefix_route() is not used anymore and is removed. [v2] Minor indentation cleanup and log updates. Signed-off-by: Romain Kuntz Acked-by: Nicolas Dichtel Acked-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 29ba4ff186eb..420e56326384 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -154,6 +154,11 @@ static void addrconf_type_change(struct net_device *dev, unsigned long event); static int addrconf_ifdown(struct net_device *dev, int how); +static struct rt6_info *addrconf_get_prefix_route(const struct in6_addr *pfx, + int plen, + const struct net_device *dev, + u32 flags, u32 noflags); + static void addrconf_dad_start(struct inet6_ifaddr *ifp); static void addrconf_dad_timer(unsigned long data); static void addrconf_dad_completed(struct inet6_ifaddr *ifp); @@ -250,12 +255,6 @@ static inline bool addrconf_qdisc_ok(const struct net_device *dev) return !qdisc_tx_is_noop(dev); } -/* Check if a route is valid prefix route */ -static inline int addrconf_is_prefix_route(const struct rt6_info *rt) -{ - return (rt->rt6i_flags & (RTF_GATEWAY | RTF_DEFAULT)) == 0; -} - static void addrconf_del_timer(struct inet6_ifaddr *ifp) { if (del_timer(&ifp->timer)) @@ -941,17 +940,15 @@ static void ipv6_del_addr(struct inet6_ifaddr *ifp) if ((ifp->flags & IFA_F_PERMANENT) && onlink < 1) { struct in6_addr prefix; struct rt6_info *rt; - struct net *net = dev_net(ifp->idev->dev); - struct flowi6 fl6 = {}; ipv6_addr_prefix(&prefix, &ifp->addr, ifp->prefix_len); - fl6.flowi6_oif = ifp->idev->dev->ifindex; - fl6.daddr = prefix; - rt = (struct rt6_info *)ip6_route_lookup(net, &fl6, - RT6_LOOKUP_F_IFACE); - if (rt != net->ipv6.ip6_null_entry && - addrconf_is_prefix_route(rt)) { + rt = addrconf_get_prefix_route(&prefix, + ifp->prefix_len, + ifp->idev->dev, + 0, RTF_GATEWAY | RTF_DEFAULT); + + if (rt) { if (onlink == 0) { ip6_del_rt(rt); rt = NULL; From 6e331f4c83021e4de2a2fc4981574b5d5b16c425 Mon Sep 17 00:00:00 2001 From: Stefan Hajnoczi Date: Wed, 9 Jan 2013 21:59:48 +0000 Subject: [PATCH 224/553] tuntap: refuse to re-attach to different tun_struct Multiqueue tun devices support detaching a tun_file from its tun_struct and re-attaching at a later point in time. This allows users to disable a specific queue temporarily. ioctl(TUNSETIFF) allows the user to specify the network interface to attach by name. This means the user can attempt to attach to interface "B" after detaching from interface "A". The driver is not designed to support this so check we are re-attaching to the right tun_struct. Failure to do so may lead to oops. Signed-off-by: Stefan Hajnoczi Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/tun.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index fbd106edbe59..cf6da6efc71a 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -491,6 +491,8 @@ static int tun_attach(struct tun_struct *tun, struct file *file) err = -EINVAL; if (rcu_dereference_protected(tfile->tun, lockdep_rtnl_is_held())) goto out; + if (tfile->detached && tun != tfile->detached) + goto out; err = -EBUSY; if (!(tun->flags & TUN_TAP_MQ) && tun->numqueues == 1) From 337da3e3f5564c5d8ca0962a0338d8c561c9f9c7 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 9 Jan 2013 22:58:07 +0000 Subject: [PATCH 225/553] bnx2x: move debugging code before the return I move the return down a line after the debugging printk. Signed-off-by: Dan Carpenter Acked-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index 277f17e3c8f8..a427b49a886c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -2777,10 +2777,10 @@ static int bnx2x_set_rss_flags(struct bnx2x *bp, struct ethtool_rxnfc *info) } else if ((info->flow_type == UDP_V6_FLOW) && (bp->rss_conf_obj.udp_rss_v6 != udp_rss_requested)) { bp->rss_conf_obj.udp_rss_v6 = udp_rss_requested; - return bnx2x_config_rss_pf(bp, &bp->rss_conf_obj, 0); DP(BNX2X_MSG_ETHTOOL, "rss re-configured, UDP 4-tupple %s\n", udp_rss_requested ? "enabled" : "disabled"); + return bnx2x_config_rss_pf(bp, &bp->rss_conf_obj, 0); } else { return 0; } From 9d43a18c6e8f868111b983388feeedaea7594fef Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 10 Jan 2013 01:31:08 +0000 Subject: [PATCH 226/553] tun: avoid owner checks on IFF_ATTACH_QUEUE At the moment, we check owner when we enable queue in tun. This seems redundant and will break some valid uses where fd is passed around: I think TUNSETOWNER is there to prevent others from attaching to a persistent device not owned by them. Here the fd is already attached, enabling/disabling queue is more like read/write. Signed-off-by: Michael S. Tsirkin Reviewed-by: Stefan Hajnoczi Signed-off-by: David S. Miller --- drivers/net/tun.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index cf6da6efc71a..99b58d862174 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1791,8 +1791,6 @@ static int tun_set_queue(struct file *file, struct ifreq *ifr) tun = tfile->detached; if (!tun) ret = -EINVAL; - else if (tun_not_capable(tun)) - ret = -EPERM; else ret = tun_attach(tun, file); } else if (ifr->ifr_flags & IFF_DETACH_QUEUE) { From ec82f94c7cfa7451b487cbda95f92f3c7a78afd8 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 10 Jan 2013 04:42:28 +0000 Subject: [PATCH 227/553] bfin_mac: Restore hardware time-stamping dependency on BF518 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 70ac618c07 ("ptp: fixup Kconfig for two PHC drivers.") removed all dependencies for the blackfin hardware time-stamping Kconfig entry. Hardware time-stamping is only available on BF518 though. Since the Kconfig entry is 'default y', just updateing your kernel source and running `make defconfig` will result in the the following build errors: drivers/net/ethernet/adi/bfin_mac.c:694: error: implicit declaration of function ‘bfin_read_EMAC_PTP_CTL’ drivers/net/ethernet/adi/bfin_mac.c:702: error: implicit declaration of function ‘bfin_write_EMAC_PTP_FV3’ drivers/net/ethernet/adi/bfin_mac.c:712: error: implicit declaration of function ‘bfin_write_EMAC_PTP_CTL’ drivers/net/ethernet/adi/bfin_mac.c:717: error: implicit declaration of function ‘bfin_write_EMAC_PTP_FOFF’ ... This patch adds back the dependency on BF518, and since it does not make sense to expose this config option when the blackfin MAC driver is not enabled also restore the dependency on BFIN_MAC. Signed-off-by: Lars-Peter Clausen Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/ethernet/adi/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/adi/Kconfig b/drivers/net/ethernet/adi/Kconfig index e49c0eff040b..a9481606bbcd 100644 --- a/drivers/net/ethernet/adi/Kconfig +++ b/drivers/net/ethernet/adi/Kconfig @@ -61,6 +61,7 @@ config BFIN_RX_DESC_NUM config BFIN_MAC_USE_HWSTAMP bool "Use IEEE 1588 hwstamp" + depends on BFIN_MAC && BF518 select PTP_1588_CLOCK default y ---help--- From 4864a16ae69dd651147aa72584d20d2c24536712 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 10 Jan 2013 04:53:39 +0000 Subject: [PATCH 228/553] bnx2x: Fix fastpath structures when memory allocation fails When allocating Tx queues, if for some reason (e.g., lack of memory) allocation fails, driver will incorrectly calculate the pointers of the various queues. This patch repositions all pointers in such a case to point at sequential structures in memory, allowing the bnx2x macros to be used correctly when accessing them. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 30 +++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 01588b66a38c..f771ddfba646 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -80,12 +80,37 @@ static inline void bnx2x_move_fp(struct bnx2x *bp, int from, int to) new_txdata_index = new_max_eth_txqs + FCOE_TXQ_IDX_OFFSET; } - memcpy(&bp->bnx2x_txq[old_txdata_index], - &bp->bnx2x_txq[new_txdata_index], + memcpy(&bp->bnx2x_txq[new_txdata_index], + &bp->bnx2x_txq[old_txdata_index], sizeof(struct bnx2x_fp_txdata)); to_fp->txdata_ptr[0] = &bp->bnx2x_txq[new_txdata_index]; } +/** + * bnx2x_shrink_eth_fp - guarantees fastpath structures stay intact + * + * @bp: driver handle + * @delta: number of eth queues which were not allocated + */ +static void bnx2x_shrink_eth_fp(struct bnx2x *bp, int delta) +{ + int i, cos, old_eth_num = BNX2X_NUM_ETH_QUEUES(bp); + + /* Queue pointer cannot be re-set on an fp-basis, as moving pointer + * backward along the array could cause memory to be overriden + */ + for (cos = 1; cos < bp->max_cos; cos++) { + for (i = 0; i < old_eth_num - delta; i++) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + int new_idx = cos * (old_eth_num - delta) + i; + + memcpy(&bp->bnx2x_txq[new_idx], fp->txdata_ptr[cos], + sizeof(struct bnx2x_fp_txdata)); + fp->txdata_ptr[cos] = &bp->bnx2x_txq[new_idx]; + } + } +} + int load_count[2][3] = { {0} }; /* per-path: 0-common, 1-port0, 2-port1 */ /* free skb in the packet ring at pos idx @@ -3863,6 +3888,7 @@ int bnx2x_alloc_fp_mem(struct bnx2x *bp) int delta = BNX2X_NUM_ETH_QUEUES(bp) - i; WARN_ON(delta < 0); + bnx2x_shrink_eth_fp(bp, delta); if (CNIC_SUPPORT(bp)) /* move non eth FPs next to last eth FP * must be done in that order From 1ef1d45a9e54814cc0b471e5377e47bd7e0cd2a8 Mon Sep 17 00:00:00 2001 From: Barak Witkowski Date: Thu, 10 Jan 2013 04:53:40 +0000 Subject: [PATCH 229/553] bnx2x: Allow management traffic after boot from SAN As part of the previous driver unload flow, whenever bnx2x is loaded after the UNDI driver it closes all Rx traffic. However, this leads to management traffic also being stopped until the network interface associated with one of its functions gets loaded. To remedy this, management traffic is re-opened once the 'cleaning' after the previous driver ends. Signed-off-by: Barak Witkowski Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_main.c | 60 ++++++++++++++++--- 1 file changed, 52 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 940ef859dc60..5523da3afcdc 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -127,6 +127,17 @@ MODULE_PARM_DESC(debug, " Default debug msglevel"); struct workqueue_struct *bnx2x_wq; +struct bnx2x_mac_vals { + u32 xmac_addr; + u32 xmac_val; + u32 emac_addr; + u32 emac_val; + u32 umac_addr; + u32 umac_val; + u32 bmac_addr; + u32 bmac_val[2]; +}; + enum bnx2x_board_type { BCM57710 = 0, BCM57711, @@ -9420,12 +9431,19 @@ static inline void bnx2x_undi_int_disable(struct bnx2x *bp) bnx2x_undi_int_disable_e1h(bp); } -static void bnx2x_prev_unload_close_mac(struct bnx2x *bp) +static void bnx2x_prev_unload_close_mac(struct bnx2x *bp, + struct bnx2x_mac_vals *vals) { u32 val, base_addr, offset, mask, reset_reg; bool mac_stopped = false; u8 port = BP_PORT(bp); + /* reset addresses as they also mark which values were changed */ + vals->bmac_addr = 0; + vals->umac_addr = 0; + vals->xmac_addr = 0; + vals->emac_addr = 0; + reset_reg = REG_RD(bp, MISC_REG_RESET_REG_2); if (!CHIP_IS_E3(bp)) { @@ -9447,14 +9465,18 @@ static void bnx2x_prev_unload_close_mac(struct bnx2x *bp) */ wb_data[0] = REG_RD(bp, base_addr + offset); wb_data[1] = REG_RD(bp, base_addr + offset + 0x4); + vals->bmac_addr = base_addr + offset; + vals->bmac_val[0] = wb_data[0]; + vals->bmac_val[1] = wb_data[1]; wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE; - REG_WR(bp, base_addr + offset, wb_data[0]); - REG_WR(bp, base_addr + offset + 0x4, wb_data[1]); + REG_WR(bp, vals->bmac_addr, wb_data[0]); + REG_WR(bp, vals->bmac_addr + 0x4, wb_data[1]); } BNX2X_DEV_INFO("Disable emac Rx\n"); - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4, 0); - + vals->emac_addr = NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4; + vals->emac_val = REG_RD(bp, vals->emac_addr); + REG_WR(bp, vals->emac_addr, 0); mac_stopped = true; } else { if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) { @@ -9465,14 +9487,18 @@ static void bnx2x_prev_unload_close_mac(struct bnx2x *bp) val & ~(1 << 1)); REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI, val | (1 << 1)); - REG_WR(bp, base_addr + XMAC_REG_CTRL, 0); + vals->xmac_addr = base_addr + XMAC_REG_CTRL; + vals->xmac_val = REG_RD(bp, vals->xmac_addr); + REG_WR(bp, vals->xmac_addr, 0); mac_stopped = true; } mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port; if (mask & reset_reg) { BNX2X_DEV_INFO("Disable umac Rx\n"); base_addr = BP_PORT(bp) ? GRCBASE_UMAC1 : GRCBASE_UMAC0; - REG_WR(bp, base_addr + UMAC_REG_COMMAND_CONFIG, 0); + vals->umac_addr = base_addr + UMAC_REG_COMMAND_CONFIG; + vals->umac_val = REG_RD(bp, vals->umac_addr); + REG_WR(bp, vals->umac_addr, 0); mac_stopped = true; } } @@ -9664,12 +9690,16 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) { u32 reset_reg, tmp_reg = 0, rc; bool prev_undi = false; + struct bnx2x_mac_vals mac_vals; + /* It is possible a previous function received 'common' answer, * but hasn't loaded yet, therefore creating a scenario of * multiple functions receiving 'common' on the same path. */ BNX2X_DEV_INFO("Common unload Flow\n"); + memset(&mac_vals, 0, sizeof(mac_vals)); + if (bnx2x_prev_is_path_marked(bp)) return bnx2x_prev_mcp_done(bp); @@ -9680,7 +9710,10 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) u32 timer_count = 1000; /* Close the MAC Rx to prevent BRB from filling up */ - bnx2x_prev_unload_close_mac(bp); + bnx2x_prev_unload_close_mac(bp, &mac_vals); + + /* close LLH filters towards the BRB */ + bnx2x_set_rx_filter(&bp->link_params, 0); /* Check if the UNDI driver was previously loaded * UNDI driver initializes CID offset for normal bell to 0x7 @@ -9727,6 +9760,17 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) /* No packets are in the pipeline, path is ready for reset */ bnx2x_reset_common(bp); + if (mac_vals.xmac_addr) + REG_WR(bp, mac_vals.xmac_addr, mac_vals.xmac_val); + if (mac_vals.umac_addr) + REG_WR(bp, mac_vals.umac_addr, mac_vals.umac_val); + if (mac_vals.emac_addr) + REG_WR(bp, mac_vals.emac_addr, mac_vals.emac_val); + if (mac_vals.bmac_addr) { + REG_WR(bp, mac_vals.bmac_addr, mac_vals.bmac_val[0]); + REG_WR(bp, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]); + } + rc = bnx2x_prev_mark_path(bp, prev_undi); if (rc) { bnx2x_prev_mcp_done(bp); From 94b144a7799e9150ae871330b9b9d8e30401220e Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 10 Jan 2013 06:58:42 +0000 Subject: [PATCH 230/553] net: ethernet: xilinx: Do not use axienet on PPC Axi ethernet can't be used on PPC because it is little endian IP and PPC is big endian. This system can't be designed. Signed-off-by: Michal Simek Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig index 5778a4ae1164..122d60c0481b 100644 --- a/drivers/net/ethernet/xilinx/Kconfig +++ b/drivers/net/ethernet/xilinx/Kconfig @@ -27,7 +27,7 @@ config XILINX_EMACLITE config XILINX_AXI_EMAC tristate "Xilinx 10/100/1000 AXI Ethernet support" - depends on (PPC32 || MICROBLAZE) + depends on MICROBLAZE select PHYLIB ---help--- This driver supports the 10/100/1000 Ethernet from Xilinx for the From cb59c87dbc8be2ffa692c50bd22f89025ba7a342 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 10 Jan 2013 06:58:43 +0000 Subject: [PATCH 231/553] net: ethernet: xilinx: Do not use NO_IRQ in axienet This driver is used on Microblaze and will be used on Arm Zynq. Microblaze doesn't define NO_IRQ and no IRQ is 0. Arm still uses NO_IRQ as -1 and there is no option to connect IRQ to irq 0. That's why <= 0 is only one option how to find out undefined IRQ. Signed-off-by: Michal Simek Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index d9f69b82cc4f..6f47100e58d7 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -1590,7 +1590,7 @@ static int axienet_of_probe(struct platform_device *op) lp->rx_irq = irq_of_parse_and_map(np, 1); lp->tx_irq = irq_of_parse_and_map(np, 0); of_node_put(np); - if ((lp->rx_irq == NO_IRQ) || (lp->tx_irq == NO_IRQ)) { + if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) { dev_err(&op->dev, "could not determine irqs\n"); ret = -ENOMEM; goto err_iounmap_2; From 7144bca6814a79ac86800da9d7f05a8c07bc818c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 9 Jan 2013 17:12:35 -0800 Subject: [PATCH 232/553] nfs: fix sunrpc/clnt.c kernel-doc warnings Fix new kernel-doc warnings in clnt.c: Warning(net/sunrpc/clnt.c:561): No description found for parameter 'flavor' Warning(net/sunrpc/clnt.c:561): Excess function parameter 'auth' description in 'rpc_clone_client_set_auth' Signed-off-by: Randy Dunlap Cc: Trond Myklebust Cc: "J. Bruce Fields" Cc: linux-nfs@vger.kernel.org Signed-off-by: Linus Torvalds --- net/sunrpc/clnt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 1915ffe598e3..507b5e84fbdb 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -555,7 +555,7 @@ EXPORT_SYMBOL_GPL(rpc_clone_client); * rpc_clone_client_set_auth - Clone an RPC client structure and set its auth * * @clnt: RPC client whose parameters are copied - * @auth: security flavor for new client + * @flavor: security flavor for new client * * Returns a fresh RPC client or an ERR_PTR. */ From bfbbd96c51b441b7a9a08762aa9ab832f6655b2c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 9 Jan 2013 17:12:45 -0800 Subject: [PATCH 233/553] audit: fix auditfilter.c kernel-doc warnings Fix new kernel-doc warning in auditfilter.c: Warning(kernel/auditfilter.c:1157): Excess function parameter 'uid' description in 'audit_receive_filter' Signed-off-by: Randy Dunlap Cc: Al Viro Cc: Eric Paris Cc: linux-audit@redhat.com (subscribers-only) Signed-off-by: Linus Torvalds --- kernel/auditfilter.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index 7f19f23d38a3..f9fc54bbe06f 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1144,7 +1144,6 @@ static void audit_log_rule_change(kuid_t loginuid, u32 sessionid, u32 sid, * audit_receive_filter - apply all rules to the specified message type * @type: audit message type * @pid: target pid for netlink audit messages - * @uid: target uid for netlink audit messages * @seq: netlink audit message sequence (serial) number * @data: payload data * @datasz: size of payload data From 2094f167f676f748d205294084828540824f0e3f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 9 Jan 2013 17:12:52 -0800 Subject: [PATCH 234/553] pci: fix iov.c kernel-doc warnings Fix kernel-doc warning in iov.c: Warning(drivers/pci/iov.c:752): No description found for parameter 'numvfs' Signed-off-by: Randy Dunlap Sorry-by: Don Dutile Signed-off-by: Linus Torvalds --- drivers/pci/iov.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index bafd2bbcaf65..c18e5bf444fa 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -739,7 +739,7 @@ EXPORT_SYMBOL_GPL(pci_num_vf); /** * pci_sriov_set_totalvfs -- reduce the TotalVFs available * @dev: the PCI PF device - * numvfs: number that should be used for TotalVFs supported + * @numvfs: number that should be used for TotalVFs supported * * Should be called from PF driver's probe routine with * device's mutex held. From 254adaa465c40151df11fc1f88f93e6e86eb61d4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 9 Jan 2013 17:13:00 -0800 Subject: [PATCH 235/553] seq_file: fix new kernel-doc warnings Fix kernel-doc warnings in fs/seq_file.c: Warning(fs/seq_file.c:304): No description found for parameter 'whence' Warning(fs/seq_file.c:304): Excess function parameter 'origin' description in 'seq_lseek' Signed-off-by: Randy Dunlap Cc: Alexander Viro Signed-off-by: Linus Torvalds --- fs/seq_file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/seq_file.c b/fs/seq_file.c index 9d863fb501f9..f2bc3dfd0b88 100644 --- a/fs/seq_file.c +++ b/fs/seq_file.c @@ -296,7 +296,7 @@ EXPORT_SYMBOL(seq_read); * seq_lseek - ->llseek() method for sequential files. * @file: the file in question * @offset: new position - * @origin: 0 for absolute, 1 for relative position + * @whence: 0 for absolute, 1 for relative position * * Ready-made ->f_op->llseek() */ From ba829137bfd167623363548aa385be769c6b2664 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Mon, 17 Dec 2012 09:53:33 +0100 Subject: [PATCH 236/553] target: Introduce TCM_NO_SENSE Introduce TCM_NO_SENSE, mapping to sense code 'Not ready, no additional sense information'. Signed-off-by: Hannes Reinecke Cc: Nicholas Bellinger Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 10 ++++++++++ include/target/target_core_base.h | 1 + 2 files changed, 11 insertions(+) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 978762dc81bf..104bf3b45a01 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2597,6 +2597,16 @@ transport_send_check_condition_and_sense(struct se_cmd *cmd, * SENSE KEY values from include/scsi/scsi.h */ switch (reason) { + case TCM_NO_SENSE: + /* CURRENT ERROR */ + buffer[0] = 0x70; + buffer[SPC_ADD_SENSE_LEN_OFFSET] = 10; + /* Not Ready */ + buffer[SPC_SENSE_KEY_OFFSET] = NOT_READY; + /* NO ADDITIONAL SENSE INFORMATION */ + buffer[SPC_ASC_KEY_OFFSET] = 0; + buffer[SPC_ASCQ_KEY_OFFSET] = 0; + break; case TCM_NON_EXISTENT_LUN: /* CURRENT ERROR */ buffer[0] = 0x70; diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 7cae2360221e..663e34a5383f 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -174,6 +174,7 @@ typedef unsigned __bitwise__ sense_reason_t; enum tcm_sense_reason_table { #define R(x) (__force sense_reason_t )(x) + TCM_NO_SENSE = R(0x00), TCM_NON_EXISTENT_LUN = R(0x01), TCM_UNSUPPORTED_SCSI_OPCODE = R(0x02), TCM_INCORRECT_AMOUNT_OF_DATA = R(0x03), From a0d50f62c8b7e461f9d53124576d59bc582f3eb3 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Mon, 17 Dec 2012 09:53:34 +0100 Subject: [PATCH 237/553] target: Use TCM_NO_SENSE for initialisation The compiler complained about uninitialized variables, so use TCM_NO_SENSE here. Signed-off-by: Hannes Reinecke Cc: Nicholas Bellinger Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_alua.c | 2 +- drivers/target/target_core_pr.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index 85140f7dde1e..7d4ec02e29a9 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -212,7 +212,7 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd) struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem, *l_tg_pt_gp_mem; unsigned char *buf; unsigned char *ptr; - sense_reason_t rc; + sense_reason_t rc = TCM_NO_SENSE; u32 len = 4; /* Skip over RESERVED area in header */ int alua_access_state, primary = 0; u16 tg_pt_id, rtpi; diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index e35dbf85841f..8e0290b38e43 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -2053,7 +2053,7 @@ core_scsi3_emulate_pro_register(struct se_cmd *cmd, u64 res_key, u64 sa_res_key, /* Used for APTPL metadata w/ UNREGISTER */ unsigned char *pr_aptpl_buf = NULL; unsigned char isid_buf[PR_REG_ISID_LEN], *isid_ptr = NULL; - sense_reason_t ret; + sense_reason_t ret = TCM_NO_SENSE; int pr_holder = 0, type; if (!se_sess || !se_lun) { From f2eeba214bcd0215b7f558cab6420e5fd153042b Mon Sep 17 00:00:00 2001 From: Mark Rustad Date: Fri, 21 Dec 2012 10:58:14 -0800 Subject: [PATCH 238/553] tcm_fc: Do not indicate retry capability to initiators When generating a PRLI response to an initiator, clear the FCP_SPPF_RETRY bit in the response. Signed-off-by: Mark Rustad Reviewed-by: Bhanu Prakash Gollapudi Acked by Robert Love Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/tcm_fc/tfc_sess.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c index 12d6fa21e5e1..59f2b467f9f7 100644 --- a/drivers/target/tcm_fc/tfc_sess.c +++ b/drivers/target/tcm_fc/tfc_sess.c @@ -396,10 +396,10 @@ static int ft_prli_locked(struct fc_rport_priv *rdata, u32 spp_len, /* * OR in our service parameters with other provider (initiator), if any. - * TBD XXX - indicate RETRY capability? */ fill: fcp_parm = ntohl(spp->spp_params); + fcp_parm &= ~FCP_SPPF_RETRY; spp->spp_params = htonl(fcp_parm | FCP_SPPF_TARG_FCN); return FC_SPP_RESP_ACK; } From edec8dfefa1f372b2dd8197da555352e76a10c03 Mon Sep 17 00:00:00 2001 From: Mark Rustad Date: Fri, 21 Dec 2012 10:58:19 -0800 Subject: [PATCH 239/553] tcm_fc: Do not report target role when target is not defined Clear the target role when no target is provided for the node performing a PRLI. Signed-off-by: Mark Rustad Reviewed-by: Bhanu Prakash Gollapudi Acked by Robert Love Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/tcm_fc/tfc_sess.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c index 59f2b467f9f7..6659dd36e806 100644 --- a/drivers/target/tcm_fc/tfc_sess.c +++ b/drivers/target/tcm_fc/tfc_sess.c @@ -355,11 +355,11 @@ static int ft_prli_locked(struct fc_rport_priv *rdata, u32 spp_len, tport = ft_tport_create(rdata->local_port); if (!tport) - return 0; /* not a target for this local port */ + goto not_target; /* not a target for this local port */ acl = ft_acl_get(tport->tpg, rdata); if (!acl) - return 0; + goto not_target; /* no target for this remote */ if (!rspp) goto fill; @@ -402,6 +402,12 @@ fill: fcp_parm &= ~FCP_SPPF_RETRY; spp->spp_params = htonl(fcp_parm | FCP_SPPF_TARG_FCN); return FC_SPP_RESP_ACK; + +not_target: + fcp_parm = ntohl(spp->spp_params); + fcp_parm &= ~FCP_SPPF_TARG_FCN; + spp->spp_params = htonl(fcp_parm); + return 0; } /** From e627c615553a356f6f70215ebb3933c6e057553e Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 2 Jan 2013 12:47:57 -0800 Subject: [PATCH 240/553] target: Fix missing CMD_T_ACTIVE bit regression for pending WRITEs This patch fixes a regression bug introduced during v3.6.x code with the following commit to drop transport_add_cmd_to_queue(), which originally re-set CMD_T_ACTIVE during pending WRITE I/O submission: commit af8772926f019b7bddd7477b8de5f3b0f12bad21 Author: Christoph Hellwig Date: Sun Jul 8 15:58:49 2012 -0400 target: replace the processing thread with a TMR work queue The following sequence happens for write commands (or any other commands with a data out phase): - The transport calls target_submit_cmd(), which sets CMD_T_ACTIVE in cmd->transport_state and sets cmd->t_state to TRANSPORT_NEW_CMD. - Things go on transport_generic_new_cmd(), which notices that the command needs to transfer data, so it sets cmd->t_state to TRANSPORT_WRITE_PENDING and calls transport_cmd_check_stop(). - transport_cmd_check_stop() clears CMD_T_ACTIVE in cmd->transport_state and returns in the normal case. - Then we continue on to call ->se_tfo->write_pending(). - The data comes back from the initiator, and the transport calls target_execute_cmd(), which sets cmd->t_state to TRANSPORT_PROCESSING and calls into the backend to actually write the data. At this point, the backend might take a long time to complete the command, since it has to do real IO. If an abort request comes in for this command at this point, it will not wait for the command to finish since CMD_T_ACTIVE is not set. Then when the command does finally finish, we blow up with use-after-free. Avoid this by setting CMD_T_ACTIVE in target_execute_cmd() so that transport_wait_for_tasks() waits for the command to finish executing. This matches the behavior from before commit 1389533ef944 ("target: remove transport_generic_handle_data"), when data was signaled via transport_generic_handle_data(), which set CMD_T_ACTIVE because it called transport_add_cmd_to_queue(). Signed-off-by: Roland Dreier Reported-by: Martin Svec Cc: Christoph Hellwig Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 104bf3b45a01..1775bda6c43c 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1688,6 +1688,7 @@ void target_execute_cmd(struct se_cmd *cmd) } cmd->t_state = TRANSPORT_PROCESSING; + cmd->transport_state |= CMD_T_ACTIVE; spin_unlock_irq(&cmd->t_state_lock); if (!target_handle_task_attr(cmd)) From 72b59d6ee8adaa51f70377db0a1917ed489bead8 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 2 Jan 2013 12:47:58 -0800 Subject: [PATCH 241/553] target: Fix use-after-free in LUN RESET handling If a backend IO takes a really long then an initiator might abort a command, and then when it gives up on the abort, send a LUN reset too, all before we process any of the original command or the abort. (The abort will wait for the backend IO to complete too) When the backend IO final completes (or fails), the abort handling will proceed and queue up a "return aborted status" operation. Then, while that's still pending, the LUN reset might find the original command still on the LUN's list of commands and try to return aborted status again, which leads to a use-after free when the first se_tfo->queue_status call frees the command and then the second se_tfo->queue_status call runs. Fix this by removing a command from the LUN state_list when we first are about to queue aborted status; we shouldn't do anything LUN-related after we've started returning status, so this seems like the correct thing to do. Signed-off-by: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 1775bda6c43c..489bd1678d87 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -541,9 +541,6 @@ static void transport_lun_remove_cmd(struct se_cmd *cmd) void transport_cmd_finish_abort(struct se_cmd *cmd, int remove) { - if (!(cmd->se_cmd_flags & SCF_SCSI_TMR_CDB)) - transport_lun_remove_cmd(cmd); - if (transport_cmd_check_stop_to_fabric(cmd)) return; if (remove) @@ -2815,6 +2812,8 @@ void transport_send_task_abort(struct se_cmd *cmd) } cmd->scsi_status = SAM_STAT_TASK_ABORTED; + transport_lun_remove_cmd(cmd); + pr_debug("Setting SAM_STAT_TASK_ABORTED status for CDB: 0x%02x," " ITT: 0x%08x\n", cmd->t_task_cdb[0], cmd->se_tfo->get_task_tag(cmd)); From 5a3b6fc0092c5f8dee7820064ee54d2631d48573 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 2 Jan 2013 12:47:59 -0800 Subject: [PATCH 242/553] target: Release se_cmd when LUN lookup fails for TMR When transport_lookup_tmr_lun() fails and we return a task management response from target_complete_tmr_failure(), we need to call transport_cmd_check_stop_to_fabric() to release the last ref to the cmd after calling se_tfo->queue_tm_rsp(), or else we will never remove the failed TMR from the session command list (and we'll end up waiting forever when trying to tear down the session). (nab: Fix minor compile breakage) Signed-off-by: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 489bd1678d87..bd587b70661a 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1393,6 +1393,8 @@ static void target_complete_tmr_failure(struct work_struct *work) se_cmd->se_tmr_req->response = TMR_LUN_DOES_NOT_EXIST; se_cmd->se_tfo->queue_tm_rsp(se_cmd); + + transport_cmd_check_stop_to_fabric(se_cmd); } /** From 64fe4f4f181cc2fe97d4176bf6ee6e3725ae33ec Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 7 Jan 2013 11:45:16 -0800 Subject: [PATCH 243/553] iscsi-target: Fix CmdSN comparison (use cmd->cmd_sn instead of cmd->stat_sn) Commit 64c13330a389 ("iscsi-target: Fix bug in handling of ExpStatSN ACK during u32 wrap-around") introduced a bug where we compare the wrong SN against our ExpCmdSN. Reported-by: Ben Hutchings Signed-off-by: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_erl2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/iscsi/iscsi_target_erl2.c b/drivers/target/iscsi/iscsi_target_erl2.c index 9ac4c151eae4..ba6091bf93fc 100644 --- a/drivers/target/iscsi/iscsi_target_erl2.c +++ b/drivers/target/iscsi/iscsi_target_erl2.c @@ -372,7 +372,7 @@ int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *conn) * made generic here. */ if (!(cmd->cmd_flags & ICF_OOO_CMDSN) && !cmd->immediate_cmd && - iscsi_sna_gte(cmd->stat_sn, conn->sess->exp_cmd_sn)) { + iscsi_sna_gte(cmd->cmd_sn, conn->sess->exp_cmd_sn)) { list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); iscsit_free_cmd(cmd); From 7d82db83165dbac8c3f6d47b73c84f38e3996e30 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Fri, 11 Jan 2013 13:10:49 +0900 Subject: [PATCH 244/553] f2fs: add f2fs_balance_fs in several interfaces The f2fs_balance_fs() is to check the number of free sections and decide whether it needs to conduct cleaning or not. If there are not enough free sections, the cleaning job should be started. In order to control an amount of free sections even under high utilization, f2fs should call f2fs_balance_fs at all the VFS interfaces that are able to produce dirty pages. This patch adds the function calls in the missing interfaces as follows. 1. f2fs_setxattr() The f2fs_setxattr() produces dirty node pages so that we should call f2fs_balance_fs() either likewise doing in other VFS interfaces such as f2fs_lookup(), f2fs_mkdir(), and so on. 2. f2fs_sync_file() We should guarantee serving free sections for syncing metadata during fsync. Previously, there is no space check before triggering checkpoint and sync_node_pages. Therefore, if a bunch of fsync calls are triggered under 100% of FS utilization, f2fs is able to be faced with no free sections, resulting in BUG_ON(). 3. f2fs_sync_fs() Before calling write_checkpoint(), we should guarantee that there are minimum free sections. 4. f2fs_write_inode() f2fs_write_inode() is also able to produce dirty node pages. Signed-off-by: Jaegeuk Kim --- fs/f2fs/file.c | 3 +++ fs/f2fs/inode.c | 3 +++ fs/f2fs/super.c | 2 ++ fs/f2fs/xattr.c | 2 ++ 4 files changed, 10 insertions(+) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index 88593c5e743c..7354c2df1087 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -137,6 +137,9 @@ int f2fs_sync_file(struct file *file, loff_t start, loff_t end, int datasync) if (ret) return ret; + /* guarantee free sections for fsync */ + f2fs_balance_fs(sbi); + mutex_lock(&inode->i_mutex); if (datasync && !(inode->i_state & I_DIRTY_DATASYNC)) diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c index bf20b4d03214..794241777322 100644 --- a/fs/f2fs/inode.c +++ b/fs/f2fs/inode.c @@ -217,6 +217,9 @@ int f2fs_write_inode(struct inode *inode, struct writeback_control *wbc) inode->i_ino == F2FS_META_INO(sbi)) return 0; + if (wbc) + f2fs_balance_fs(sbi); + node_page = get_node_page(sbi, inode->i_ino); if (IS_ERR(node_page)) return PTR_ERR(node_page); diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index afa7ef0c4ba7..0f2b2eb86a05 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -137,6 +137,8 @@ int f2fs_sync_fs(struct super_block *sb, int sync) if (sync) write_checkpoint(sbi, false, false); + else + f2fs_balance_fs(sbi); return 0; } diff --git a/fs/f2fs/xattr.c b/fs/f2fs/xattr.c index 940136a3d3a6..8038c0496504 100644 --- a/fs/f2fs/xattr.c +++ b/fs/f2fs/xattr.c @@ -318,6 +318,8 @@ int f2fs_setxattr(struct inode *inode, int name_index, const char *name, if (name_len > 255 || value_len > MAX_VALUE_LEN) return -ERANGE; + f2fs_balance_fs(sbi); + mutex_lock_op(sbi, NODE_NEW); if (!fi->i_xattr_nid) { /* Allocate new attribute block */ From 9eaeba701386037cdd2ccd8bf8650feb2e2cec31 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Fri, 11 Jan 2013 14:09:38 +0900 Subject: [PATCH 245/553] f2fs: move f2fs_balance_fs to punch_hole The f2fs_fallocate() has two operations: punch_hole and expand_size. Only in the case of punch_hole, dirty node pages can be produced, so let's trigger f2fs_balance_fs() in this case only. Furthermore, let's trigger it at every data truncation routine. Signed-off-by: Namjae Jeon Signed-off-by: Jaegeuk Kim --- fs/f2fs/file.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index 7354c2df1087..819de7f39f26 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -410,6 +410,8 @@ int truncate_hole(struct inode *inode, pgoff_t pg_start, pgoff_t pg_end) struct dnode_of_data dn; struct f2fs_sb_info *sbi = F2FS_SB(inode->i_sb); + f2fs_balance_fs(sbi); + mutex_lock_op(sbi, DATA_TRUNC); set_new_dnode(&dn, inode, NULL, NULL, 0); err = get_dnode_of_data(&dn, index, RDONLY_NODE); @@ -537,7 +539,6 @@ static long f2fs_fallocate(struct file *file, int mode, loff_t offset, loff_t len) { struct inode *inode = file->f_path.dentry->d_inode; - struct f2fs_sb_info *sbi = F2FS_SB(inode->i_sb); long ret; if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE)) @@ -552,8 +553,6 @@ static long f2fs_fallocate(struct file *file, int mode, inode->i_mtime = inode->i_ctime = CURRENT_TIME; mark_inode_dirty(inode); } - - f2fs_balance_fs(sbi); return ret; } From 7b514a886ba50e3b99295b00805f0d5ad750ca66 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 10 Jan 2013 16:18:47 +0000 Subject: [PATCH 246/553] tcp: accept RST without ACK flag commit c3ae62af8e755 (tcp: should drop incoming frames without ACK flag set) added a regression on the handling of RST messages. RST should be allowed to come even without ACK bit set. We validate the RST by checking the exact sequence, as requested by RFC 793 and 5961 3.2, in tcp_validate_incoming() Reported-by: Eric Wong Signed-off-by: Eric Dumazet Acked-by: Neal Cardwell Tested-by: Eric Wong Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index a28e4db8a952..18f97ca76b00 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5543,7 +5543,7 @@ slow_path: if (len < (th->doff << 2) || tcp_checksum_complete_user(sk, skb)) goto csum_error; - if (!th->ack) + if (!th->ack && !th->rst) goto discard; /* @@ -5988,7 +5988,7 @@ int tcp_rcv_state_process(struct sock *sk, struct sk_buff *skb, goto discard; } - if (!th->ack) + if (!th->ack && !th->rst) goto discard; if (!tcp_validate_incoming(sk, skb, th, 0)) From 31be5425d795585251a3ee970319c37643e0cda2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 10 Jan 2013 14:06:38 +0100 Subject: [PATCH 247/553] ALSA: usb-audio: Fix NULL dereference by access to non-existing substream The commit [0d9741c0: ALSA: usb-audio: sync ep init fix for audioformat mismatch] introduced the correction of parameters to be set for sync EP. But since the new code assumes that the sync EP is always paired with the data EP of another direction, it triggers Oops when a device only with a single direction is used. This patch adds a proper check of sync EP type and the presence of the paired substream for avoiding the crash. Reported-and-tested-by: Jens Axboe Signed-off-by: Takashi Iwai --- sound/usb/pcm.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index c6593101c049..d82e378d37cb 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -511,6 +511,16 @@ static int configure_sync_endpoint(struct snd_usb_substream *subs) struct snd_usb_substream *sync_subs = &subs->stream->substream[subs->direction ^ 1]; + if (subs->sync_endpoint->type != SND_USB_ENDPOINT_TYPE_DATA || + !subs->stream) + return snd_usb_endpoint_set_params(subs->sync_endpoint, + subs->pcm_format, + subs->channels, + subs->period_bytes, + subs->cur_rate, + subs->cur_audiofmt, + NULL); + /* Try to find the best matching audioformat. */ list_for_each_entry(fp, &sync_subs->fmt_list, list) { int score = match_endpoint_audioformats(fp, subs->cur_audiofmt, From 30c254ff5c6510877c4fa3c3e87bb6d7172a7fcf Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 10 Jan 2013 20:17:35 -0800 Subject: [PATCH 248/553] sh: define TASK_UNMAPPED_BASE as a page aligned constant b4265f12340f809447b9a48055e88c444b480c89 (mm: use vm_unmapped_area() on sh architecture) broke sh boot. This patch define TASK_UNMAPPED_BASE as a page aligned constant to solve this issue. Special thanks to Michel Acked-by: Michel Lespinasse Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/include/asm/processor_32.h | 2 +- arch/sh/include/asm/processor_64.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h index b1320d55ca30..e699a12cdcca 100644 --- a/arch/sh/include/asm/processor_32.h +++ b/arch/sh/include/asm/processor_32.h @@ -39,7 +39,7 @@ /* This decides where the kernel will search for a free chunk of vm * space during mmap's. */ -#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) +#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3) /* * Bit of SR register diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h index 1ee8946f0952..1cc7d3197143 100644 --- a/arch/sh/include/asm/processor_64.h +++ b/arch/sh/include/asm/processor_64.h @@ -47,7 +47,7 @@ pc; }) /* This decides where the kernel will search for a free chunk of vm * space during mmap's. */ -#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) +#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3) /* * Bit of SR register From 5a799b824b6046befa7e10107a3d65f40816f645 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 25 Nov 2012 22:01:46 -0800 Subject: [PATCH 249/553] sh: clkfwk: bugfix: sh_clk_div_enable() care sh_clk_div_set_rate() if div6 764f4e4e33d18cde4dcaf8a0d860b749c6d6d08b (sh: clkfwk: Use shared sh_clk_div_enable/disable()) shared enable/disable funcions for div4/div6. But new sh_clk_div_enable() didn't care sh_clk_div_set_rate() which is required on div6 clock. This patch fixes it. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/sh/clk/cpg.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c index 5aedcdf4ac5c..1ebe67cd1833 100644 --- a/drivers/sh/clk/cpg.c +++ b/drivers/sh/clk/cpg.c @@ -126,6 +126,12 @@ static int sh_clk_div_set_rate(struct clk *clk, unsigned long rate) static int sh_clk_div_enable(struct clk *clk) { + if (clk->div_mask == SH_CLK_DIV6_MSK) { + int ret = sh_clk_div_set_rate(clk, clk->rate); + if (ret < 0) + return ret; + } + sh_clk_write(sh_clk_read(clk) & ~CPG_CKSTP_BIT, clk); return 0; } From 4a71997a3279a339e7336ea5d0cd27282e2dea44 Mon Sep 17 00:00:00 2001 From: Thomas Schwinge Date: Fri, 16 Nov 2012 10:46:20 +0100 Subject: [PATCH 250/553] sh: Fix FDPIC binary loader Ensure that the aux table is properly initialized, even when optional features are missing. Without this, the FDPIC loader did not work. This was meant to be included in commit d5ab780305bb6d60a7b5a74f18cf84eb6ad153b1. Signed-off-by: Thomas Schwinge Cc: stable@vger.kernel.org Signed-off-by: Paul Mundt --- arch/sh/include/asm/elf.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h index 37924afa8d8a..bf9f44f17c29 100644 --- a/arch/sh/include/asm/elf.h +++ b/arch/sh/include/asm/elf.h @@ -203,9 +203,9 @@ extern void __kernel_vsyscall; if (vdso_enabled) \ NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \ else \ - NEW_AUX_ENT(AT_IGNORE, 0); + NEW_AUX_ENT(AT_IGNORE, 0) #else -#define VSYSCALL_AUX_ENT +#define VSYSCALL_AUX_ENT NEW_AUX_ENT(AT_IGNORE, 0) #endif /* CONFIG_VSYSCALL */ #ifdef CONFIG_SH_FPU From f1688e0431d3a395388e70fe21da89ed0de0c323 Mon Sep 17 00:00:00 2001 From: Dave Reisner Date: Wed, 2 Jan 2013 08:54:37 -0500 Subject: [PATCH 251/553] debugfs: convert gid= argument from decimal, not octal This patch technically breaks userspace, but I suspect that anyone who actually used this flag would have encountered this brokenness, declared it lunacy, and already sent a patch. Signed-off-by: Dave Reisner Reviewed-by: Vasiliy Kulikov Acked-by: Kees Cook Signed-off-by: Greg Kroah-Hartman --- fs/debugfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index 153bb1e42e63..a5f12b7e228d 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -176,7 +176,7 @@ static int debugfs_parse_options(char *data, struct debugfs_mount_opts *opts) opts->uid = uid; break; case Opt_gid: - if (match_octal(&args[0], &option)) + if (match_int(&args[0], &option)) return -EINVAL; gid = make_kgid(current_user_ns(), option); if (!gid_valid(gid)) From aec99b7bda06436cd95229fe4841aeef29112e11 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 11 Jan 2013 22:08:27 +0800 Subject: [PATCH 252/553] ARM: imx: fix build error with !CONFIG_SMP Commit 68b2532 (ARM: imx: select HAVE_IMX_SRC when SMP is enabled) introduces a build error with imx_v6_v7_defconfig when CONFIG_SMP is deselected. LINK vmlinux LD vmlinux.o MODPOST vmlinux.o GEN .version CHK include/generated/compile.h UPD include/generated/compile.h CC init/version.o LD init/built-in.o arch/arm/mach-imx/built-in.o: In function `imx6q_restart': platform-ahci-imx.c:(.text+0x448c): undefined reference to `imx_src_prepare_restart' arch/arm/mach-imx/built-in.o: In function `imx6q_pm_enter': platform-ahci-imx.c:(.text+0x4544): undefined reference to `imx_set_cpu_jump' arch/arm/mach-imx/built-in.o: In function `imx6q_init_irq': platform-ahci-imx.c:(.init.text+0xbef0): undefined reference to `imx_src_init' make[1]: *** [vmlinux] Error 1 While the commit adds 'def_bool y if SMP' for HAVE_IMX_SRC, it should not remove 'select HAVE_IMX_SRC' from SOC_IMX6Q, as the IMX6Q UP build also needs HAVE_IMX_SRC. Add the HAVE_IMX_SRC select back for SOC_IMX6Q to fix above build error. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 1ad0d76de8c7..8e2f29293a58 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -853,6 +853,7 @@ config SOC_IMX6Q select HAVE_CAN_FLEXCAN if CAN select HAVE_IMX_GPC select HAVE_IMX_MMDC + select HAVE_IMX_SRC select HAVE_SMP select MFD_SYSCON select PINCTRL From 9bf42300e672fb1b5587d1da5486f8b144e74598 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 28 Aug 2012 18:38:58 -0300 Subject: [PATCH 253/553] [media] uvcvideo: Return -EACCES when trying to set a read-only control Commit ba68c8530a263dc4de440fa10bb20a1c5b9d4ff5 (Partly revert "[media] uvcvideo: Set error_idx properly for extended controls API failures") also reverted part of commit 30ecb936cbcd83e3735625ac63e1b4466546f5fe ("uvcvideo: Return -EACCES when trying to access a read/write-only control") by mistake. Fix it. Signed-off-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/uvc/uvc_ctrl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c index 2bb7613ddebb..d5baab17a5ef 100644 --- a/drivers/media/usb/uvc/uvc_ctrl.c +++ b/drivers/media/usb/uvc/uvc_ctrl.c @@ -1431,8 +1431,10 @@ int uvc_ctrl_set(struct uvc_video_chain *chain, int ret; ctrl = uvc_find_control(chain, xctrl->id, &mapping); - if (ctrl == NULL || (ctrl->info.flags & UVC_CTRL_FLAG_SET_CUR) == 0) + if (ctrl == NULL) return -EINVAL; + if (!(ctrl->info.flags & UVC_CTRL_FLAG_SET_CUR)) + return -EACCES; /* Clamp out of range values. */ switch (mapping->v4l2_type) { From 29005c09f41d459c458eb8761a54703b56afb16a Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 11 Jan 2013 09:32:04 -0300 Subject: [PATCH 254/553] [media] uvcvideo: Cleanup leftovers of partial revert Commit ba68c8530a263dc4de440fa10bb20a1c5b9d4ff5 (Partly revert "[media] uvcvideo: Set error_idx properly for extended controls API failures") missed two modifications. Clean them up. Signed-off-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/uvc/uvc_v4l2.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c index f2ee8c6b0d8d..5eb89894f90b 100644 --- a/drivers/media/usb/uvc/uvc_v4l2.c +++ b/drivers/media/usb/uvc/uvc_v4l2.c @@ -657,8 +657,7 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) ret = uvc_ctrl_get(chain, ctrl); if (ret < 0) { uvc_ctrl_rollback(handle); - ctrls->error_idx = ret == -ENOENT - ? ctrls->count : i; + ctrls->error_idx = i; return ret; } } @@ -686,9 +685,7 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) ret = uvc_ctrl_set(chain, ctrl); if (ret < 0) { uvc_ctrl_rollback(handle); - ctrls->error_idx = (ret == -ENOENT && - cmd == VIDIOC_S_EXT_CTRLS) - ? ctrls->count : i; + ctrls->error_idx = i; return ret; } } From 68d6f84ba0c47e658beff3a4bf0c43acee4b4690 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 11 Jan 2013 09:42:00 -0300 Subject: [PATCH 255/553] [media] uvcvideo: Set error_idx properly for S_EXT_CTRLS failures The uvc_set_ctrl() calls don't write to the hardware. A failure at that point thus leaves the device in a clean state, with no control modified. Set the error_idx field to the count value to reflect that, as per the V4L2 specification. TRY_EXT_CTRLS is unchanged and the error_idx field must always be set to the failed control index in that case. Signed-off-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/uvc/uvc_v4l2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c index 5eb89894f90b..68d59b527492 100644 --- a/drivers/media/usb/uvc/uvc_v4l2.c +++ b/drivers/media/usb/uvc/uvc_v4l2.c @@ -685,7 +685,8 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) ret = uvc_ctrl_set(chain, ctrl); if (ret < 0) { uvc_ctrl_rollback(handle); - ctrls->error_idx = i; + ctrls->error_idx = cmd == VIDIOC_S_EXT_CTRLS + ? ctrls->count : i; return ret; } } From 47ecfcb7d01418fcbfbc75183ba5e28e98b667b2 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Fri, 11 Jan 2013 09:27:01 +0000 Subject: [PATCH 256/553] mm: compaction: Partially revert capture of suitable high-order page Eric Wong reported on 3.7 and 3.8-rc2 that ppoll() got stuck when waiting for POLLIN on a local TCP socket. It was easier to trigger if there was disk IO and dirty pages at the same time and he bisected it to commit 1fb3f8ca0e92 ("mm: compaction: capture a suitable high-order page immediately when it is made available"). The intention of that patch was to improve high-order allocations under memory pressure after changes made to reclaim in 3.6 drastically hurt THP allocations but the approach was flawed. For Eric, the problem was that page->pfmemalloc was not being cleared for captured pages leading to a poor interaction with swap-over-NFS support causing the packets to be dropped. However, I identified a few more problems with the patch including the fact that it can increase contention on zone->lock in some cases which could result in async direct compaction being aborted early. In retrospect the capture patch took the wrong approach. What it should have done is mark the pageblock being migrated as MIGRATE_ISOLATE if it was allocating for THP and avoided races that way. While the patch was showing to improve allocation success rates at the time, the benefit is marginal given the relative complexity and it should be revisited from scratch in the context of the other reclaim-related changes that have taken place since the patch was first written and tested. This patch partially reverts commit 1fb3f8ca "mm: compaction: capture a suitable high-order page immediately when it is made available". Reported-and-tested-by: Eric Wong Tested-by: Eric Dumazet Cc: stable@vger.kernel.org Signed-off-by: Mel Gorman Signed-off-by: Linus Torvalds --- include/linux/compaction.h | 4 +- include/linux/mm.h | 1 - mm/compaction.c | 92 ++++++-------------------------------- mm/internal.h | 1 - mm/page_alloc.c | 35 ++++----------- 5 files changed, 23 insertions(+), 110 deletions(-) diff --git a/include/linux/compaction.h b/include/linux/compaction.h index 6ecb6dc2f303..cc7bddeaf553 100644 --- a/include/linux/compaction.h +++ b/include/linux/compaction.h @@ -22,7 +22,7 @@ extern int sysctl_extfrag_handler(struct ctl_table *table, int write, extern int fragmentation_index(struct zone *zone, unsigned int order); extern unsigned long try_to_compact_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask, nodemask_t *mask, - bool sync, bool *contended, struct page **page); + bool sync, bool *contended); extern int compact_pgdat(pg_data_t *pgdat, int order); extern void reset_isolation_suitable(pg_data_t *pgdat); extern unsigned long compaction_suitable(struct zone *zone, int order); @@ -75,7 +75,7 @@ static inline bool compaction_restarting(struct zone *zone, int order) #else static inline unsigned long try_to_compact_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask, nodemask_t *nodemask, - bool sync, bool *contended, struct page **page) + bool sync, bool *contended) { return COMPACT_CONTINUE; } diff --git a/include/linux/mm.h b/include/linux/mm.h index 63204078f72b..66e2f7c61e5c 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -455,7 +455,6 @@ void put_pages_list(struct list_head *pages); void split_page(struct page *page, unsigned int order); int split_free_page(struct page *page); -int capture_free_page(struct page *page, int alloc_order, int migratetype); /* * Compound pages have a destructor function. Provide a diff --git a/mm/compaction.c b/mm/compaction.c index 6b807e466497..2c570432aa56 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -816,6 +816,7 @@ static isolate_migrate_t isolate_migratepages(struct zone *zone, static int compact_finished(struct zone *zone, struct compact_control *cc) { + unsigned int order; unsigned long watermark; if (fatal_signal_pending(current)) @@ -850,22 +851,16 @@ static int compact_finished(struct zone *zone, return COMPACT_CONTINUE; /* Direct compactor: Is a suitable page free? */ - if (cc->page) { - /* Was a suitable page captured? */ - if (*cc->page) - return COMPACT_PARTIAL; - } else { - unsigned int order; - for (order = cc->order; order < MAX_ORDER; order++) { - struct free_area *area = &zone->free_area[cc->order]; - /* Job done if page is free of the right migratetype */ - if (!list_empty(&area->free_list[cc->migratetype])) - return COMPACT_PARTIAL; + for (order = cc->order; order < MAX_ORDER; order++) { + struct free_area *area = &zone->free_area[order]; - /* Job done if allocation would set block type */ - if (cc->order >= pageblock_order && area->nr_free) - return COMPACT_PARTIAL; - } + /* Job done if page is free of the right migratetype */ + if (!list_empty(&area->free_list[cc->migratetype])) + return COMPACT_PARTIAL; + + /* Job done if allocation would set block type */ + if (cc->order >= pageblock_order && area->nr_free) + return COMPACT_PARTIAL; } return COMPACT_CONTINUE; @@ -921,60 +916,6 @@ unsigned long compaction_suitable(struct zone *zone, int order) return COMPACT_CONTINUE; } -static void compact_capture_page(struct compact_control *cc) -{ - unsigned long flags; - int mtype, mtype_low, mtype_high; - - if (!cc->page || *cc->page) - return; - - /* - * For MIGRATE_MOVABLE allocations we capture a suitable page ASAP - * regardless of the migratetype of the freelist is is captured from. - * This is fine because the order for a high-order MIGRATE_MOVABLE - * allocation is typically at least a pageblock size and overall - * fragmentation is not impaired. Other allocation types must - * capture pages from their own migratelist because otherwise they - * could pollute other pageblocks like MIGRATE_MOVABLE with - * difficult to move pages and making fragmentation worse overall. - */ - if (cc->migratetype == MIGRATE_MOVABLE) { - mtype_low = 0; - mtype_high = MIGRATE_PCPTYPES; - } else { - mtype_low = cc->migratetype; - mtype_high = cc->migratetype + 1; - } - - /* Speculatively examine the free lists without zone lock */ - for (mtype = mtype_low; mtype < mtype_high; mtype++) { - int order; - for (order = cc->order; order < MAX_ORDER; order++) { - struct page *page; - struct free_area *area; - area = &(cc->zone->free_area[order]); - if (list_empty(&area->free_list[mtype])) - continue; - - /* Take the lock and attempt capture of the page */ - if (!compact_trylock_irqsave(&cc->zone->lock, &flags, cc)) - return; - if (!list_empty(&area->free_list[mtype])) { - page = list_entry(area->free_list[mtype].next, - struct page, lru); - if (capture_free_page(page, cc->order, mtype)) { - spin_unlock_irqrestore(&cc->zone->lock, - flags); - *cc->page = page; - return; - } - } - spin_unlock_irqrestore(&cc->zone->lock, flags); - } - } -} - static int compact_zone(struct zone *zone, struct compact_control *cc) { int ret; @@ -1054,9 +995,6 @@ static int compact_zone(struct zone *zone, struct compact_control *cc) goto out; } } - - /* Capture a page now if it is a suitable size */ - compact_capture_page(cc); } out: @@ -1069,8 +1007,7 @@ out: static unsigned long compact_zone_order(struct zone *zone, int order, gfp_t gfp_mask, - bool sync, bool *contended, - struct page **page) + bool sync, bool *contended) { unsigned long ret; struct compact_control cc = { @@ -1080,7 +1017,6 @@ static unsigned long compact_zone_order(struct zone *zone, .migratetype = allocflags_to_migratetype(gfp_mask), .zone = zone, .sync = sync, - .page = page, }; INIT_LIST_HEAD(&cc.freepages); INIT_LIST_HEAD(&cc.migratepages); @@ -1110,7 +1046,7 @@ int sysctl_extfrag_threshold = 500; */ unsigned long try_to_compact_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask, nodemask_t *nodemask, - bool sync, bool *contended, struct page **page) + bool sync, bool *contended) { enum zone_type high_zoneidx = gfp_zone(gfp_mask); int may_enter_fs = gfp_mask & __GFP_FS; @@ -1136,7 +1072,7 @@ unsigned long try_to_compact_pages(struct zonelist *zonelist, int status; status = compact_zone_order(zone, order, gfp_mask, sync, - contended, page); + contended); rc = max(status, rc); /* If a normal allocation would succeed, stop compacting */ @@ -1192,7 +1128,6 @@ int compact_pgdat(pg_data_t *pgdat, int order) struct compact_control cc = { .order = order, .sync = false, - .page = NULL, }; return __compact_pgdat(pgdat, &cc); @@ -1203,7 +1138,6 @@ static int compact_node(int nid) struct compact_control cc = { .order = -1, .sync = true, - .page = NULL, }; return __compact_pgdat(NODE_DATA(nid), &cc); diff --git a/mm/internal.h b/mm/internal.h index d597f94cc205..9ba21100ebf3 100644 --- a/mm/internal.h +++ b/mm/internal.h @@ -135,7 +135,6 @@ struct compact_control { int migratetype; /* MOVABLE, RECLAIMABLE etc */ struct zone *zone; bool contended; /* True if a lock was contended */ - struct page **page; /* Page captured of requested size */ }; unsigned long diff --git a/mm/page_alloc.c b/mm/page_alloc.c index bc6cc0e913bd..ece7b8e8a5b6 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1384,14 +1384,8 @@ void split_page(struct page *page, unsigned int order) set_page_refcounted(page + i); } -/* - * Similar to the split_page family of functions except that the page - * required at the given order and being isolated now to prevent races - * with parallel allocators - */ -int capture_free_page(struct page *page, int alloc_order, int migratetype) +static int __isolate_free_page(struct page *page, unsigned int order) { - unsigned int order; unsigned long watermark; struct zone *zone; int mt; @@ -1399,7 +1393,6 @@ int capture_free_page(struct page *page, int alloc_order, int migratetype) BUG_ON(!PageBuddy(page)); zone = page_zone(page); - order = page_order(page); mt = get_pageblock_migratetype(page); if (mt != MIGRATE_ISOLATE) { @@ -1408,7 +1401,7 @@ int capture_free_page(struct page *page, int alloc_order, int migratetype) if (!zone_watermark_ok(zone, 0, watermark, 0, 0)) return 0; - __mod_zone_freepage_state(zone, -(1UL << alloc_order), mt); + __mod_zone_freepage_state(zone, -(1UL << order), mt); } /* Remove page from free list */ @@ -1416,11 +1409,7 @@ int capture_free_page(struct page *page, int alloc_order, int migratetype) zone->free_area[order].nr_free--; rmv_page_order(page); - if (alloc_order != order) - expand(zone, page, alloc_order, order, - &zone->free_area[order], migratetype); - - /* Set the pageblock if the captured page is at least a pageblock */ + /* Set the pageblock if the isolated page is at least a pageblock */ if (order >= pageblock_order - 1) { struct page *endpage = page + (1 << order) - 1; for (; page < endpage; page += pageblock_nr_pages) { @@ -1431,7 +1420,7 @@ int capture_free_page(struct page *page, int alloc_order, int migratetype) } } - return 1UL << alloc_order; + return 1UL << order; } /* @@ -1449,10 +1438,9 @@ int split_free_page(struct page *page) unsigned int order; int nr_pages; - BUG_ON(!PageBuddy(page)); order = page_order(page); - nr_pages = capture_free_page(page, order, 0); + nr_pages = __isolate_free_page(page, order); if (!nr_pages) return 0; @@ -2136,8 +2124,6 @@ __alloc_pages_direct_compact(gfp_t gfp_mask, unsigned int order, bool *contended_compaction, bool *deferred_compaction, unsigned long *did_some_progress) { - struct page *page = NULL; - if (!order) return NULL; @@ -2149,16 +2135,12 @@ __alloc_pages_direct_compact(gfp_t gfp_mask, unsigned int order, current->flags |= PF_MEMALLOC; *did_some_progress = try_to_compact_pages(zonelist, order, gfp_mask, nodemask, sync_migration, - contended_compaction, &page); + contended_compaction); current->flags &= ~PF_MEMALLOC; - /* If compaction captured a page, prep and use it */ - if (page) { - prep_new_page(page, order, gfp_mask); - goto got_page; - } - if (*did_some_progress != COMPACT_SKIPPED) { + struct page *page; + /* Page migration frees to the PCP lists but we want merging */ drain_pages(get_cpu()); put_cpu(); @@ -2168,7 +2150,6 @@ __alloc_pages_direct_compact(gfp_t gfp_mask, unsigned int order, alloc_flags & ~ALLOC_NO_WATERMARKS, preferred_zone, migratetype); if (page) { -got_page: preferred_zone->compact_blockskip_flush = false; preferred_zone->compact_considered = 0; preferred_zone->compact_defer_shift = 0; From 30d4b180e20c081f435143f8bc211c66a930608a Mon Sep 17 00:00:00 2001 From: Tamas Lengyel Date: Mon, 31 Dec 2012 15:44:30 -0500 Subject: [PATCH 257/553] xen/privcmd: Relax access control in privcmd_ioctl_mmap In the privcmd Linux driver two checks in the functions privcmd_ioctl_mmap and privcmd_ioctl_mmap_batch are not needed as they are trying to enforce hypervisor-level access control. They should be removed as they break secondary control domains when performing dom0 disaggregation. Xen itself provides adequate security controls around these hypercalls and these checks prevent those controls from functioning as intended. Signed-off-by: Tamas K Lengyel Cc: Daniel De Graaf [v1: Fixed up the patch and commit description] Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/privcmd.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index b9d08987a5a5..f6316127f53f 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -199,9 +199,6 @@ static long privcmd_ioctl_mmap(void __user *udata) LIST_HEAD(pagelist); struct mmap_mfn_state state; - if (!xen_initial_domain()) - return -EPERM; - /* We only support privcmd_ioctl_mmap_batch for auto translated. */ if (xen_feature(XENFEAT_auto_translated_physmap)) return -ENOSYS; @@ -360,9 +357,6 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) int *err_array = NULL; struct mmap_batch_state state; - if (!xen_initial_domain()) - return -EPERM; - switch (version) { case 1: if (copy_from_user(&m, udata, sizeof(struct privcmd_mmapbatch))) From 67c6b2ef2662b17cc2174f2bdc22a7cb818a8376 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 10 Jan 2013 10:18:49 +0100 Subject: [PATCH 258/553] ARM: integrator: move syscon remap for AP PCIv3 The Integrator/AP syscon remapping was done in the .setup() function rather than .preinit() which is wrong - .preinit() is called before .setup() and the former also use the syscon base and cause a crash since it was not yet remapped. Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/mach-integrator/pci_v3.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index be50e795536d..e7fcea7f3300 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -475,13 +475,12 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys) { int ret = 0; + if (!ap_syscon_base) + return -EINVAL; + if (nr == 0) { sys->mem_offset = PHYS_PCI_MEM_BASE; ret = pci_v3_setup_resources(sys); - /* Remap the Integrator system controller */ - ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); - if (!ap_syscon_base) - return -EINVAL; } return ret; @@ -497,6 +496,13 @@ void __init pci_v3_preinit(void) unsigned int temp; int ret; + /* Remap the Integrator system controller */ + ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); + if (!ap_syscon_base) { + pr_err("unable to remap the AP syscon for PCIv3\n"); + return; + } + pcibios_min_mem = 0x00100000; /* From 94a85b633829b946eef53fc1825d526312fb856f Mon Sep 17 00:00:00 2001 From: "Quentin.Li" Date: Wed, 26 Dec 2012 16:58:22 +0800 Subject: [PATCH 259/553] USB: option: Add new MEDIATEK PID support In option.c, add some new MEDIATEK PIDs support for MEDIATEK new products. This is a MEDIATEK inc. release patch. Signed-off-by: Quentin.Li Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index e6f87b76c715..2e8c1c8ff3d7 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -429,9 +429,12 @@ static void option_instat_callback(struct urb *urb); #define MEDIATEK_VENDOR_ID 0x0e8d #define MEDIATEK_PRODUCT_DC_1COM 0x00a0 #define MEDIATEK_PRODUCT_DC_4COM 0x00a5 +#define MEDIATEK_PRODUCT_DC_4COM2 0x00a7 #define MEDIATEK_PRODUCT_DC_5COM 0x00a4 #define MEDIATEK_PRODUCT_7208_1COM 0x7101 #define MEDIATEK_PRODUCT_7208_2COM 0x7102 +#define MEDIATEK_PRODUCT_7103_2COM 0x7103 +#define MEDIATEK_PRODUCT_7106_2COM 0x7106 #define MEDIATEK_PRODUCT_FP_1COM 0x0003 #define MEDIATEK_PRODUCT_FP_2COM 0x0023 #define MEDIATEK_PRODUCT_FPDC_1COM 0x0043 @@ -1294,6 +1297,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7103_2COM, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7106_2COM, 0x02, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) }, { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) }, { } /* Terminating entry */ }; From bbc0313d6186e1aefd267222201d2512c689e4f4 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 10 Dec 2012 00:58:36 -0200 Subject: [PATCH 260/553] usb: imx21-hcd: Include missing linux/module.h Include , so that the following errors are fixed: drivers/usb/host/imx21-hcd.c:1929:20: error: expected declaration specifiers or '...' before string constant drivers/usb/host/imx21-hcd.c:1930:15: error: expected declaration specifiers or '...' before string constant drivers/usb/host/imx21-hcd.c:1931:16: error: expected declaration specifiers or '...' before string constant drivers/usb/host/imx21-hcd.c:1932:14: error: expected declaration specifiers or '...' before string constant Signed-off-by: Fabio Estevam Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/imx21-hcd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index bd6a7447ccc9..f0ebe8e7c58b 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -58,6 +58,7 @@ #include #include #include +#include #include "imx21-hcd.h" From fab38246f318edcd0dcb8fd3852a47cf8938878a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Wed, 19 Dec 2012 15:15:17 +0100 Subject: [PATCH 261/553] USB: option: blacklist network interface on ZTE MF880 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver description files gives these names to the vendor specific functions on this modem: diag: VID_19D2&PID_0284&MI_00 nmea: VID_19D2&PID_0284&MI_01 at: VID_19D2&PID_0284&MI_02 mdm: VID_19D2&PID_0284&MI_03 net: VID_19D2&PID_0284&MI_04 Signed-off-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2e8c1c8ff3d7..4d85330ea6cc 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -926,7 +926,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */ .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, From 5ec0085440ef8c2cf50002b34d5a504ee12aa2bf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 28 Dec 2012 17:29:52 +0100 Subject: [PATCH 262/553] USB: option: add Telekom Speedstick LTE II MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit also known as Alcatel One Touch L100V LTE The driver description files gives these names to the vendor specific functions on this modem: Application1: VID_1BBB&PID_011E&MI_00 Application2: VID_1BBB&PID_011E&MI_01 Modem: VID_1BBB&PID_011E&MI_03 Ethernet: VID_1BBB&PID_011E&MI_04 Reported-by: Thomas Schäfer Cc: Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4d85330ea6cc..2c75d50a0446 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -288,6 +288,7 @@ static void option_instat_callback(struct urb *urb); #define ALCATEL_VENDOR_ID 0x1bbb #define ALCATEL_PRODUCT_X060S_X200 0x0000 #define ALCATEL_PRODUCT_X220_X500D 0x0017 +#define ALCATEL_PRODUCT_L100V 0x011e #define PIRELLI_VENDOR_ID 0x1266 #define PIRELLI_PRODUCT_C100_1 0x1002 @@ -1194,6 +1195,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), From ad86e58661b38b279b7519d4e49c7a19dc1654bb Mon Sep 17 00:00:00 2001 From: Dzianis Kahanovich Date: Mon, 3 Dec 2012 16:06:26 +0300 Subject: [PATCH 263/553] USB: option: add Nexpring NP10T terminal id Hyundai Petatel Inc. Nexpring NP10T terminal (EV-DO rev.A USB modem) ID Signed-off-by: Denis Kaganovich Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2c75d50a0446..478adcfcdf26 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -445,6 +445,10 @@ static void option_instat_callback(struct urb *urb); #define CELLIENT_VENDOR_ID 0x2692 #define CELLIENT_PRODUCT_MEN200 0x9005 +/* Hyundai Petatel Inc. products */ +#define PETATEL_VENDOR_ID 0x1ff4 +#define PETATEL_PRODUCT_NP10T 0x600e + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -1306,6 +1310,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) }, { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) }, { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) }, + { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); From 036915a7a402753c05b8d0529f5fd08805ab46d0 Mon Sep 17 00:00:00 2001 From: Denis N Ladin Date: Wed, 26 Dec 2012 18:29:44 +0500 Subject: [PATCH 264/553] USB: cdc-acm: Add support for "PSC Scanning, Magellan 800i" Adding support "PSC Scanning, Magellan 800i" in cdc-acm Very simple, but very necessary. Suitable for all versions of the kernel > 2.6 Signed-off-by: Denis N Ladin Cc: stable Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 8d809a811e16..2d92cce260d7 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1602,6 +1602,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1340), /* Conexant CX93010-2x UCMxx */ .driver_info = NO_UNION_NORMAL, }, + { USB_DEVICE(0x05f9, 0x4002), /* PSC Scanning, Magellan 800i */ + .driver_info = NO_UNION_NORMAL, + }, { USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ }, From 07e72b95f5038cc82304b9a4a2eb7f9fc391ea68 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 29 Nov 2012 15:05:57 +0100 Subject: [PATCH 265/553] USB: hub: handle claim of enabled remote wakeup after reset Some touchscreens have buggy firmware which claims remote wakeup to be enabled after a reset. They nevertheless crash if the feature is cleared by the host. Add a check for reset resume before checking for an enabled remote wakeup feature. On compliant devices the feature must be cleared after a reset anyway. Signed-off-by: Oliver Neukum Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 9641e9c1dec5..957ed2c41482 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3000,7 +3000,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) static int finish_port_resume(struct usb_device *udev) { int status = 0; - u16 devstatus; + u16 devstatus = 0; /* caller owns the udev device lock */ dev_dbg(&udev->dev, "%s\n", @@ -3045,7 +3045,13 @@ static int finish_port_resume(struct usb_device *udev) if (status) { dev_dbg(&udev->dev, "gone after usb resume? status %d\n", status); - } else if (udev->actconfig) { + /* + * There are a few quirky devices which violate the standard + * by claiming to have remote wakeup enabled after a reset, + * which crash if the feature is cleared, hence check for + * udev->reset_resume + */ + } else if (udev->actconfig && !udev->reset_resume) { le16_to_cpus(&devstatus); if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { status = usb_control_msg(udev, From 72533b77d30c2be02672e26b5dde1263d7b4c2be Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 11 Jan 2013 12:05:31 -0800 Subject: [PATCH 266/553] arm: mvebu: Fix compile for multiplatform when ARMv6 is selected Some systems compile in both ARMv6 and ARMv7 into multiplatform configurations. This means the default compiler flags are for ARMv6, and we will get: arch/arm/mach-mvebu/coherency_ll.S: Assembler messages: arch/arm/mach-mvebu/coherency_ll.S:45: Error: selected processor does not support `dsb' Fix this by specifying ARMv7 flags for coherency_ll.o. Signed-off-by: Tony Lindgren Signed-off-by: Olof Johansson --- arch/arm/mach-mvebu/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 5dcb369b58aa..99df4df680fd 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -1,6 +1,8 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-orion/include +AFLAGS_coherency_ll.o := -Wa,-march=armv7-a + obj-y += system-controller.o obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o From 2df8f8a6a897ebf4c5613b5be6103d33b2a21520 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 11 Jan 2013 16:14:10 -0500 Subject: [PATCH 267/553] tracing: Fix regression with irqsoff tracer and tracing_on file Commit 02404baf1b47 "tracing: Remove deprecated tracing_enabled file" removed the tracing_enabled file as it never worked properly and the tracing_on file should be used instead. But the tracing_on file didn't call into the tracers start/stop routines like the tracing_enabled file did. This caused trace-cmd to break when it enabled the irqsoff tracer. If you just did "echo irqsoff > current_tracer" then it would work properly. But the tool trace-cmd disables tracing first by writing "0" into the tracing_on file. Then it writes "irqsoff" into current_tracer and then writes "1" into tracing_on. Unfortunately, the above commit changed the irqsoff tracer to check the tracing_on status instead of the tracing_enabled status. If it's disabled then it does not start the tracer internals. The problem is that writing "1" into tracing_on does not call the tracers "start" routine like writing "1" into tracing_enabled did. This makes the irqsoff tracer not start when using the trace-cmd tool, and is a regression for userspace. Simple fix is to have the tracing_on file call the tracers start() method when being enabled (and the stop() method when disabled). Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 1bbfa0446507..f3ec1cfb0de1 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -4817,10 +4817,17 @@ rb_simple_write(struct file *filp, const char __user *ubuf, return ret; if (buffer) { - if (val) + mutex_lock(&trace_types_lock); + if (val) { ring_buffer_record_on(buffer); - else + if (current_trace->start) + current_trace->start(tr); + } else { ring_buffer_record_off(buffer); + if (current_trace->stop) + current_trace->stop(tr); + } + mutex_unlock(&trace_types_lock); } (*ppos)++; From 392370e7aa387185349946d29a0e17b918e51ae6 Mon Sep 17 00:00:00 2001 From: Krzysztof Mazur Date: Fri, 11 Jan 2013 23:20:09 +0100 Subject: [PATCH 268/553] cpuidle: fix number of initialized/destroyed states Commit bf4d1b5ddb78f86078ac6ae0415802d5f0c68f92 (cpuidle: support multiple drivers) changed the number of initialized state kobjects in cpuidle_add_state_sysfs() from device->state_count to drv->state_count, but left device->state_count in cpuidle_remove_state_sysfs(). The values of these two fields may be different, in which case a NULL pointer dereference may happen in cpuidle_remove_state_sysfs(), for example. Fix this problem by making cpuidle_add_state_sysfs() use device->state_count too (which restores the original behavior of it). [rjw: Changelog] Signed-off-by: Krzysztof Mazur Acked-by: Daniel Lezcano Signed-off-by: Rafael J. Wysocki --- drivers/cpuidle/sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c index 340942946106..428754af6236 100644 --- a/drivers/cpuidle/sysfs.c +++ b/drivers/cpuidle/sysfs.c @@ -374,7 +374,7 @@ static int cpuidle_add_state_sysfs(struct cpuidle_device *device) struct cpuidle_driver *drv = cpuidle_get_cpu_driver(device); /* state statistics */ - for (i = 0; i < drv->state_count; i++) { + for (i = 0; i < device->state_count; i++) { kobj = kzalloc(sizeof(struct cpuidle_state_kobj), GFP_KERNEL); if (!kobj) goto error_state; From a9acc5365dbda29f7be2884efb63771dc24bd815 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 14 Nov 2012 20:43:31 +0000 Subject: [PATCH 269/553] x86/Sandy Bridge: reserve pages when integrated graphics is present SNB graphics devices have a bug that prevent them from accessing certain memory ranges, namely anything below 1M and in the pages listed in the table. So reserve those at boot if set detect a SNB gfx device on the CPU to avoid GPU hangs. Stephane Marchesin had a similar patch to the page allocator awhile back, but rather than reserving pages up front, it leaked them at allocation time. [ hpa: made a number of stylistic changes, marked arrays as static const, and made less verbose; use "memblock=debug" for full verbosity. ] Signed-off-by: Jesse Barnes Signed-off-by: H. Peter Anvin --- arch/x86/kernel/setup.c | 78 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 23ddd558fbd5..9dcb32545032 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -610,6 +610,81 @@ static __init void reserve_ibft_region(void) static unsigned reserve_low = CONFIG_X86_RESERVE_LOW << 10; +static bool __init snb_gfx_workaround_needed(void) +{ + int i; + u16 vendor, devid; + static const u16 snb_ids[] = { + 0x0102, + 0x0112, + 0x0122, + 0x0106, + 0x0116, + 0x0126, + 0x010a, + }; + + /* Assume no if something weird is going on with PCI */ + if (!early_pci_allowed()) + return false; + + vendor = read_pci_config_16(0, 2, 0, PCI_VENDOR_ID); + if (vendor != 0x8086) + return false; + + devid = read_pci_config_16(0, 2, 0, PCI_DEVICE_ID); + for (i = 0; i < ARRAY_SIZE(snb_ids); i++) + if (devid == snb_ids[i]) + return true; + + return false; +} + +/* + * Sandy Bridge graphics has trouble with certain ranges, exclude + * them from allocation. + */ +static void __init trim_snb_memory(void) +{ + static const unsigned long bad_pages[] = { + 0x20050000, + 0x20110000, + 0x20130000, + 0x20138000, + 0x40004000, + }; + int i; + + if (!snb_gfx_workaround_needed()) + return; + + printk(KERN_DEBUG "reserving inaccessible SNB gfx pages\n"); + + /* + * Reserve all memory below the 1 MB mark that has not + * already been reserved. + */ + memblock_reserve(0, 1<<20); + + for (i = 0; i < ARRAY_SIZE(bad_pages); i++) { + if (memblock_reserve(bad_pages[i], PAGE_SIZE)) + printk(KERN_WARNING "failed to reserve 0x%08lx\n", + bad_pages[i]); + } +} + +/* + * Here we put platform-specific memory range workarounds, i.e. + * memory known to be corrupt or otherwise in need to be reserved on + * specific platforms. + * + * If this gets used more widely it could use a real dispatch mechanism. + */ +static void __init trim_platform_memory_ranges(void) +{ + trim_snb_memory(); +} + static void __init trim_bios_range(void) { /* @@ -630,6 +705,7 @@ static void __init trim_bios_range(void) * take them out. */ e820_remove_range(BIOS_BEGIN, BIOS_END - BIOS_BEGIN, E820_RAM, 1); + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); } @@ -908,6 +984,8 @@ void __init setup_arch(char **cmdline_p) setup_real_mode(); + trim_platform_memory_ranges(); + init_gbpages(); /* max_pfn_mapped is updated here */ From 896f97ea95c1d29c0520ee0766b66b7f64cb967c Mon Sep 17 00:00:00 2001 From: David Decotigny Date: Fri, 11 Jan 2013 14:31:36 -0800 Subject: [PATCH 270/553] lib: cpu_rmap: avoid flushing all workqueues In some cases, free_irq_cpu_rmap() is called while holding a lock (eg rtnl). This can lead to deadlocks, because it invokes flush_scheduled_work() which ends up waiting for whole system workqueue to flush, but some pending works might try to acquire the lock we are already holding. This commit uses reference-counting to replace irq_run_affinity_notifiers(). It also removes irq_run_affinity_notifiers() altogether. [akpm@linux-foundation.org: eliminate free_cpu_rmap, rename cpu_rmap_reclaim() to cpu_rmap_release(), propagate kref_put() retval from cpu_rmap_put()] Signed-off-by: David Decotigny Reviewed-by: Ben Hutchings Acked-by: Eric Dumazet Reviewed-by: Josh Triplett Cc: "David S. Miller" Cc: Or Gerlitz Acked-by: Amir Vadai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cpu_rmap.h | 13 +++------- include/linux/interrupt.h | 5 ---- lib/cpu_rmap.c | 54 +++++++++++++++++++++++++++++++++++---- 3 files changed, 53 insertions(+), 19 deletions(-) diff --git a/include/linux/cpu_rmap.h b/include/linux/cpu_rmap.h index ac3bbb5b9502..1739510d8994 100644 --- a/include/linux/cpu_rmap.h +++ b/include/linux/cpu_rmap.h @@ -13,9 +13,11 @@ #include #include #include +#include /** * struct cpu_rmap - CPU affinity reverse-map + * @refcount: kref for object * @size: Number of objects to be reverse-mapped * @used: Number of objects added * @obj: Pointer to array of object pointers @@ -23,6 +25,7 @@ * based on affinity masks */ struct cpu_rmap { + struct kref refcount; u16 size, used; void **obj; struct { @@ -33,15 +36,7 @@ struct cpu_rmap { #define CPU_RMAP_DIST_INF 0xffff extern struct cpu_rmap *alloc_cpu_rmap(unsigned int size, gfp_t flags); - -/** - * free_cpu_rmap - free CPU affinity reverse-map - * @rmap: Reverse-map allocated with alloc_cpu_rmap(), or %NULL - */ -static inline void free_cpu_rmap(struct cpu_rmap *rmap) -{ - kfree(rmap); -} +extern int cpu_rmap_put(struct cpu_rmap *rmap); extern int cpu_rmap_add(struct cpu_rmap *rmap, void *obj); extern int cpu_rmap_update(struct cpu_rmap *rmap, u16 index, diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 5e4e6170f43a..5fa5afeeb759 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -268,11 +268,6 @@ struct irq_affinity_notify { extern int irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify); -static inline void irq_run_affinity_notifiers(void) -{ - flush_scheduled_work(); -} - #else /* CONFIG_SMP */ static inline int irq_set_affinity(unsigned int irq, const struct cpumask *m) diff --git a/lib/cpu_rmap.c b/lib/cpu_rmap.c index 145dec5267c9..5fbed5caba6e 100644 --- a/lib/cpu_rmap.c +++ b/lib/cpu_rmap.c @@ -45,6 +45,7 @@ struct cpu_rmap *alloc_cpu_rmap(unsigned int size, gfp_t flags) if (!rmap) return NULL; + kref_init(&rmap->refcount); rmap->obj = (void **)((char *)rmap + obj_offset); /* Initially assign CPUs to objects on a rota, since we have @@ -63,6 +64,35 @@ struct cpu_rmap *alloc_cpu_rmap(unsigned int size, gfp_t flags) } EXPORT_SYMBOL(alloc_cpu_rmap); +/** + * cpu_rmap_release - internal reclaiming helper called from kref_put + * @ref: kref to struct cpu_rmap + */ +static void cpu_rmap_release(struct kref *ref) +{ + struct cpu_rmap *rmap = container_of(ref, struct cpu_rmap, refcount); + kfree(rmap); +} + +/** + * cpu_rmap_get - internal helper to get new ref on a cpu_rmap + * @rmap: reverse-map allocated with alloc_cpu_rmap() + */ +static inline void cpu_rmap_get(struct cpu_rmap *rmap) +{ + kref_get(&rmap->refcount); +} + +/** + * cpu_rmap_put - release ref on a cpu_rmap + * @rmap: reverse-map allocated with alloc_cpu_rmap() + */ +int cpu_rmap_put(struct cpu_rmap *rmap) +{ + return kref_put(&rmap->refcount, cpu_rmap_release); +} +EXPORT_SYMBOL(cpu_rmap_put); + /* Reevaluate nearest object for given CPU, comparing with the given * neighbours at the given distance. */ @@ -197,8 +227,7 @@ struct irq_glue { * free_irq_cpu_rmap - free a CPU affinity reverse-map used for IRQs * @rmap: Reverse-map allocated with alloc_irq_cpu_map(), or %NULL * - * Must be called in process context, before freeing the IRQs, and - * without holding any locks required by global workqueue items. + * Must be called in process context, before freeing the IRQs. */ void free_irq_cpu_rmap(struct cpu_rmap *rmap) { @@ -212,12 +241,18 @@ void free_irq_cpu_rmap(struct cpu_rmap *rmap) glue = rmap->obj[index]; irq_set_affinity_notifier(glue->notify.irq, NULL); } - irq_run_affinity_notifiers(); - kfree(rmap); + cpu_rmap_put(rmap); } EXPORT_SYMBOL(free_irq_cpu_rmap); +/** + * irq_cpu_rmap_notify - callback for IRQ subsystem when IRQ affinity updated + * @notify: struct irq_affinity_notify passed by irq/manage.c + * @mask: cpu mask for new SMP affinity + * + * This is executed in workqueue context. + */ static void irq_cpu_rmap_notify(struct irq_affinity_notify *notify, const cpumask_t *mask) { @@ -230,10 +265,16 @@ irq_cpu_rmap_notify(struct irq_affinity_notify *notify, const cpumask_t *mask) pr_warning("irq_cpu_rmap_notify: update failed: %d\n", rc); } +/** + * irq_cpu_rmap_release - reclaiming callback for IRQ subsystem + * @ref: kref to struct irq_affinity_notify passed by irq/manage.c + */ static void irq_cpu_rmap_release(struct kref *ref) { struct irq_glue *glue = container_of(ref, struct irq_glue, notify.kref); + + cpu_rmap_put(glue->rmap); kfree(glue); } @@ -258,10 +299,13 @@ int irq_cpu_rmap_add(struct cpu_rmap *rmap, int irq) glue->notify.notify = irq_cpu_rmap_notify; glue->notify.release = irq_cpu_rmap_release; glue->rmap = rmap; + cpu_rmap_get(rmap); glue->index = cpu_rmap_add(rmap, glue); rc = irq_set_affinity_notifier(irq, &glue->notify); - if (rc) + if (rc) { + cpu_rmap_put(glue->rmap); kfree(glue); + } return rc; } EXPORT_SYMBOL(irq_cpu_rmap_add); From 0a1af1d61edae189b0a81bc46386ab37eb3d9d4d Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 11 Jan 2013 14:31:39 -0800 Subject: [PATCH 271/553] drivers/rtc/rtc-da9055.c: fix cross-section reference Fix the warning WARNING: drivers/rtc/rtc-da9055.o(.text+0xa71): Section mismatch in reference from the function da9055_rtc_probe() to the function .init.text:da9055_rtc_device_init() Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-da9055.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-da9055.c b/drivers/rtc/rtc-da9055.c index 96bafc5c3bf8..8f0dcfedb83c 100644 --- a/drivers/rtc/rtc-da9055.c +++ b/drivers/rtc/rtc-da9055.c @@ -227,7 +227,7 @@ static const struct rtc_class_ops da9055_rtc_ops = { .alarm_irq_enable = da9055_rtc_alarm_irq_enable, }; -static int __init da9055_rtc_device_init(struct da9055 *da9055, +static int da9055_rtc_device_init(struct da9055 *da9055, struct da9055_pdata *pdata) { int ret; From 04fa5d6a6547fbfcf613efd00637666fe19b24ab Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Fri, 11 Jan 2013 14:31:40 -0800 Subject: [PATCH 272/553] mm: migrate: check page_count of THP before migrating Hugh Dickins pointed out that migrate_misplaced_transhuge_page() does not check page_count before migrating like base page migration and khugepage. He could not see why this was safe and he is right. The potential impact of the bug is avoided due to the limitations of NUMA balancing. The page_mapcount() check ensures that only a single address space is using this page and as THPs are typically private it should not be possible for another address space to fault it in parallel. If the address space has one associated task then it's difficult to have both a GUP pin and be referencing the page at the same time. If there are multiple tasks then a buggy scenario requires that another thread be accessing the page while the direct IO is in flight. This is dodgy behaviour as there is a possibility of corruption with or without THP migration. It would be While we happen to be safe for the most part it is shoddy to depend on such "safety" so this patch checks the page count similar to anonymous pages. Note that this does not mean that the page_mapcount() check can go away. If we were to remove the page_mapcount() check the the THP would have to be unmapped from all referencing PTEs, replaced with migration PTEs and restored properly afterwards. Signed-off-by: Mel Gorman Reported-by: Hugh Dickins Cc: Ingo Molnar Cc: Andrea Arcangeli Acked-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/migrate.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/mm/migrate.c b/mm/migrate.c index 3b676b0c5c3e..c38778610aa8 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -1679,9 +1679,21 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm, page_xchg_last_nid(new_page, page_last_nid(page)); isolated = numamigrate_isolate_page(pgdat, page); - if (!isolated) { + + /* + * Failing to isolate or a GUP pin prevents migration. The expected + * page count is 2. 1 for anonymous pages without a mapping and 1 + * for the callers pin. If the page was isolated, the page will + * need to be put back on the LRU. + */ + if (!isolated || page_count(page) != 2) { count_vm_events(PGMIGRATE_FAIL, HPAGE_PMD_NR); put_page(new_page); + if (isolated) { + putback_lru_page(page); + isolated = 0; + goto out; + } goto out_keep_locked; } From 552f0cc72aadfc8657876ce310e7a8dc37529536 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 11 Jan 2013 14:31:43 -0800 Subject: [PATCH 273/553] drivers/video/ssd1307fb.c: fix bit order bug in the byte translation function This was leading to a strange behaviour when using the fbcon driver on top of this one: the letters were in the right order, but each letter had a vertical symmetry. This was because the addressing was right for the byte, but the addressing of each individual bit was inverted. Signed-off-by: Maxime Ripard Cc: Brian Lilly Cc: Greg Kroah-Hartman Cc: Florian Tobias Schandinat Cc: Thomas Petazzoni Cc: Tomi Valkeinen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/ssd1307fb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c index 4d99dd7a6831..395cb6a8d8f3 100644 --- a/drivers/video/ssd1307fb.c +++ b/drivers/video/ssd1307fb.c @@ -145,8 +145,8 @@ static void ssd1307fb_update_display(struct ssd1307fb_par *par) u32 page_length = SSD1307FB_WIDTH * i; u32 index = page_length + (SSD1307FB_WIDTH * k + j) / 8; u8 byte = *(vmem + index); - u8 bit = byte & (1 << (7 - (j % 8))); - bit = bit >> (7 - (j % 8)); + u8 bit = byte & (1 << (j % 8)); + bit = bit >> (j % 8); buf |= bit << k; } ssd1307fb_write_data(par->client, buf); From c0232ae861df679092c15960b6cd9f589d9b7177 Mon Sep 17 00:00:00 2001 From: Lin Feng Date: Fri, 11 Jan 2013 14:31:44 -0800 Subject: [PATCH 274/553] mm: memblock: fix wrong memmove size in memblock_merge_regions() The memmove span covers from (next+1) to the end of the array, and the index of next is (i+1), so the index of (next+1) is (i+2). So the size of remaining array elements is (type->cnt - (i + 2)). Since the remaining elements of the memblock array are move forward by one element and there is only one additional element caused by this bug. So there won't be any write overflow here but read overflow. It may read one more element out of the array address if the array happens to be full. Commonly it doesn't matter at all but if the array happens to be located at the end a memblock, it may cause a invalid read operation for the physical address doesn't exist. There are 2 *happens to be* here, so I think the probability is quite low, I don't know if any guy is haunted by this bug before. Mostly I think it's user-invisible. Signed-off-by: Lin Feng Acked-by: Tejun Heo Reviewed-by: Wanpeng Li Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memblock.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/memblock.c b/mm/memblock.c index 625905523c2a..88adc8afb610 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -314,7 +314,8 @@ static void __init_memblock memblock_merge_regions(struct memblock_type *type) } this->size += next->size; - memmove(next, next + 1, (type->cnt - (i + 1)) * sizeof(*next)); + /* move forward from next + 1, index of which is i + 2 */ + memmove(next, next + 1, (type->cnt - (i + 2)) * sizeof(*next)); type->cnt--; } } From 7964c06d66c76507d8b6b662bffea770c29ef0ce Mon Sep 17 00:00:00 2001 From: Jason Liu Date: Fri, 11 Jan 2013 14:31:47 -0800 Subject: [PATCH 275/553] mm: compaction: fix echo 1 > compact_memory return error issue when run the folloing command under shell, it will return error sh/$ echo 1 > /proc/sys/vm/compact_memory sh/$ sh: write error: Bad address After strace, I found the following log: ... write(1, "1\n", 2) = 3 write(1, "", 4294967295) = -1 EFAULT (Bad address) write(2, "echo: write error: Bad address\n", 31echo: write error: Bad address ) = 31 This tells system return 3(COMPACT_COMPLETE) after write data to compact_memory. The fix is to make the system just return 0 instead 3(COMPACT_COMPLETE) from sysctl_compaction_handler after compaction_nodes finished. Signed-off-by: Jason Liu Suggested-by: David Rientjes Acked-by: Mel Gorman Cc: Rik van Riel Cc: Minchan Kim Cc: KAMEZAWA Hiroyuki Acked-by: David Rientjes Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/compaction.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/mm/compaction.c b/mm/compaction.c index 6b807e466497..f8f5c111b7d7 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -1210,7 +1210,7 @@ static int compact_node(int nid) } /* Compact all nodes in the system */ -static int compact_nodes(void) +static void compact_nodes(void) { int nid; @@ -1219,8 +1219,6 @@ static int compact_nodes(void) for_each_online_node(nid) compact_node(nid); - - return COMPACT_COMPLETE; } /* The written value is actually unused, all memory is compacted */ @@ -1231,7 +1229,7 @@ int sysctl_compaction_handler(struct ctl_table *table, int write, void __user *buffer, size_t *length, loff_t *ppos) { if (write) - return compact_nodes(); + compact_nodes(); return 0; } From 6d92d4f6a74766cc885b18218268e0c47fbca399 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Fri, 11 Jan 2013 14:31:48 -0800 Subject: [PATCH 276/553] fs/exec.c: work around icc miscompilation The tricky problem is this check: if (i++ >= max) icc (mis)optimizes this check as: if (++i > max) The check now becomes a no-op since max is MAX_ARG_STRINGS (0x7FFFFFFF). This is "allowed" by the C standard, assuming i++ never overflows, because signed integer overflow is undefined behavior. This optimization effectively reverts the previous commit 362e6663ef23 ("exec.c, compat.c: fix count(), compat_count() bounds checking") that tries to fix the check. This patch simply moves ++ after the check. Signed-off-by: Xi Wang Cc: Jason Baron Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/exec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/exec.c b/fs/exec.c index 18c45cac368f..20df02c1cc70 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -434,8 +434,9 @@ static int count(struct user_arg_ptr argv, int max) if (IS_ERR(p)) return -EFAULT; - if (i++ >= max) + if (i >= max) return -E2BIG; + ++i; if (fatal_signal_pending(current)) return -ERESTARTNOHAND; From c060f943d0929f3e429c5d9522290584f6281d6e Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Fri, 11 Jan 2013 14:31:51 -0800 Subject: [PATCH 277/553] mm: use aligned zone start for pfn_to_bitidx calculation The current calculation in pfn_to_bitidx assumes that (pfn - zone->zone_start_pfn) >> pageblock_order will return the same bit for all pfn in a pageblock. If zone_start_pfn is not aligned to pageblock_nr_pages, this may not always be correct. Consider the following with pageblock order = 10, zone start 2MB: pfn | pfn - zone start | (pfn - zone start) >> page block order ---------------------------------------------------------------- 0x26000 | 0x25e00 | 0x97 0x26100 | 0x25f00 | 0x97 0x26200 | 0x26000 | 0x98 0x26300 | 0x26100 | 0x98 This means that calling {get,set}_pageblock_migratetype on a single page will not set the migratetype for the full block. Fix this by rounding down zone_start_pfn when doing the bitidx calculation. For our use case, the effects of this bug were mostly tied to the fact that CMA allocations would either take a long time or fail to happen. Depending on the driver using CMA, this could result in anything from visual glitches to application failures. Signed-off-by: Laura Abbott Acked-by: Mel Gorman Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index bc6cc0e913bd..c957805a7f0e 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -5604,7 +5604,7 @@ static inline int pfn_to_bitidx(struct zone *zone, unsigned long pfn) pfn &= (PAGES_PER_SECTION-1); return (pfn >> pageblock_order) * NR_PAGEBLOCK_BITS; #else - pfn = pfn - zone->zone_start_pfn; + pfn = pfn - round_down(zone->zone_start_pfn, pageblock_nr_pages); return (pfn >> pageblock_order) * NR_PAGEBLOCK_BITS; #endif /* CONFIG_SPARSEMEM */ } From 10d73e655cef6e86ea8589dca3df4e495e4900b0 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Fri, 11 Jan 2013 14:31:52 -0800 Subject: [PATCH 278/553] mm: bootmem: fix free_all_bootmem_core() with odd bitmap alignment Currently free_all_bootmem_core ignores that node_min_pfn may be not multiple of BITS_PER_LONG. Eg commit 6dccdcbe2c3e ("mm: bootmem: fix checking the bitmap when finally freeing bootmem") shifts vec by lower bits of start instead of lower bits of idx. Also if (IS_ALIGNED(start, BITS_PER_LONG) && vec == ~0UL) assumes that vec bit 0 corresponds to start pfn, which is only true when node_min_pfn is a multiple of BITS_PER_LONG. Also loop in the else clause can double-free pages (e.g. with node_min_pfn == start == 1, map[0] == ~0 on 32-bit machine page 32 will be double-freed). This bug causes the following message during xtensa kernel boot: bootmem::free_all_bootmem_core nid=0 start=1 end=8000 BUG: Bad page state in process swapper pfn:00001 page:d04bd020 count:0 mapcount:-127 mapping: (null) index:0x2 page flags: 0x0() Call Trace: bad_page+0x8c/0x9c free_pages_prepare+0x5e/0x88 free_hot_cold_page+0xc/0xa0 __free_pages+0x24/0x38 __free_pages_bootmem+0x54/0x56 free_all_bootmem_core$part$11+0xeb/0x138 free_all_bootmem+0x46/0x58 mem_init+0x25/0xa4 start_kernel+0x11e/0x25c should_never_return+0x0/0x3be7 The fix is the following: - always align vec so that its bit 0 corresponds to start - provide BITS_PER_LONG bits in vec, if those bits are available in the map - don't free pages past next start position in the else clause. Signed-off-by: Max Filippov Cc: Gavin Shan Cc: Johannes Weiner Cc: Tejun Heo Cc: Yinghai Lu Cc: Joonsoo Kim Cc: Prasad Koya Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/bootmem.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/mm/bootmem.c b/mm/bootmem.c index 1324cd74faec..b93376c39b61 100644 --- a/mm/bootmem.c +++ b/mm/bootmem.c @@ -185,10 +185,23 @@ static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata) while (start < end) { unsigned long *map, idx, vec; + unsigned shift; map = bdata->node_bootmem_map; idx = start - bdata->node_min_pfn; + shift = idx & (BITS_PER_LONG - 1); + /* + * vec holds at most BITS_PER_LONG map bits, + * bit 0 corresponds to start. + */ vec = ~map[idx / BITS_PER_LONG]; + + if (shift) { + vec >>= shift; + if (end - start >= BITS_PER_LONG) + vec |= ~map[idx / BITS_PER_LONG + 1] << + (BITS_PER_LONG - shift); + } /* * If we have a properly aligned and fully unreserved * BITS_PER_LONG block of pages in front of us, free @@ -201,19 +214,18 @@ static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata) count += BITS_PER_LONG; start += BITS_PER_LONG; } else { - unsigned long off = 0; + unsigned long cur = start; - vec >>= start & (BITS_PER_LONG - 1); - while (vec) { + start = ALIGN(start + 1, BITS_PER_LONG); + while (vec && cur != start) { if (vec & 1) { - page = pfn_to_page(start + off); + page = pfn_to_page(cur); __free_pages_bootmem(page, 0); count++; } vec >>= 1; - off++; + ++cur; } - start = ALIGN(start + 1, BITS_PER_LONG); } } From fef6c12e8874279ebebfa4cd58d735f6adce3ed1 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 11 Jan 2013 14:31:54 -0800 Subject: [PATCH 279/553] arch/mn10300/Kconfig: select CONFIG_GENERIC_ATOMIC64 mn10300 doesn't provide its own atomic64 implementation, so it should pull in the generic one. Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index aa03f2e13385..e70001cfa05b 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -6,6 +6,7 @@ config MN10300 select ARCH_WANT_IPC_PARSE_VERSION select HAVE_ARCH_TRACEHOOK select HAVE_ARCH_KGDB + select GENERIC_ATOMIC64 select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER select GENERIC_CLOCKEVENTS select MODULES_USE_ELF_RELA From 1b963c81b14509e330e0fe3218b645ece2738dc5 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 11 Jan 2013 14:31:56 -0800 Subject: [PATCH 280/553] lockdep, rwsem: provide down_write_nest_lock() down_write_nest_lock() provides a means to annotate locking scenario where an outer lock is guaranteed to serialize the order nested locks are being acquired. This is analogoue to already existing mutex_lock_nest_lock() and spin_lock_nest_lock(). Signed-off-by: Jiri Kosina Cc: Rik van Riel Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Mel Gorman Tested-by: Sedat Dilek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/lockdep.h | 3 +++ include/linux/rwsem.h | 9 +++++++++ kernel/rwsem.c | 10 ++++++++++ 3 files changed, 22 insertions(+) diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h index 00e46376e28f..2bca44b0893c 100644 --- a/include/linux/lockdep.h +++ b/include/linux/lockdep.h @@ -524,14 +524,17 @@ static inline void print_irqtrace_events(struct task_struct *curr) #ifdef CONFIG_DEBUG_LOCK_ALLOC # ifdef CONFIG_PROVE_LOCKING # define rwsem_acquire(l, s, t, i) lock_acquire(l, s, t, 0, 2, NULL, i) +# define rwsem_acquire_nest(l, s, t, n, i) lock_acquire(l, s, t, 0, 2, n, i) # define rwsem_acquire_read(l, s, t, i) lock_acquire(l, s, t, 1, 2, NULL, i) # else # define rwsem_acquire(l, s, t, i) lock_acquire(l, s, t, 0, 1, NULL, i) +# define rwsem_acquire_nest(l, s, t, n, i) lock_acquire(l, s, t, 0, 1, n, i) # define rwsem_acquire_read(l, s, t, i) lock_acquire(l, s, t, 1, 1, NULL, i) # endif # define rwsem_release(l, n, i) lock_release(l, n, i) #else # define rwsem_acquire(l, s, t, i) do { } while (0) +# define rwsem_acquire_nest(l, s, t, n, i) do { } while (0) # define rwsem_acquire_read(l, s, t, i) do { } while (0) # define rwsem_release(l, n, i) do { } while (0) #endif diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h index 54bd7cd7ecbd..413cc11e414a 100644 --- a/include/linux/rwsem.h +++ b/include/linux/rwsem.h @@ -125,8 +125,17 @@ extern void downgrade_write(struct rw_semaphore *sem); */ extern void down_read_nested(struct rw_semaphore *sem, int subclass); extern void down_write_nested(struct rw_semaphore *sem, int subclass); +extern void _down_write_nest_lock(struct rw_semaphore *sem, struct lockdep_map *nest_lock); + +# define down_write_nest_lock(sem, nest_lock) \ +do { \ + typecheck(struct lockdep_map *, &(nest_lock)->dep_map); \ + _down_write_nest_lock(sem, &(nest_lock)->dep_map); \ +} while (0); + #else # define down_read_nested(sem, subclass) down_read(sem) +# define down_write_nest_lock(sem, nest_lock) down_read(sem) # define down_write_nested(sem, subclass) down_write(sem) #endif diff --git a/kernel/rwsem.c b/kernel/rwsem.c index 6850f53e02d8..b3c6c3fcd847 100644 --- a/kernel/rwsem.c +++ b/kernel/rwsem.c @@ -116,6 +116,16 @@ void down_read_nested(struct rw_semaphore *sem, int subclass) EXPORT_SYMBOL(down_read_nested); +void _down_write_nest_lock(struct rw_semaphore *sem, struct lockdep_map *nest) +{ + might_sleep(); + rwsem_acquire_nest(&sem->dep_map, 0, 0, nest, _RET_IP_); + + LOCK_CONTENDED(sem, __down_write_trylock, __down_write); +} + +EXPORT_SYMBOL(_down_write_nest_lock); + void down_write_nested(struct rw_semaphore *sem, int subclass) { might_sleep(); From 572043c90db65b45a4efd959db7458edcf6411ad Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 11 Jan 2013 14:31:59 -0800 Subject: [PATCH 281/553] mm: mmap: annotate vm_lock_anon_vma locking properly for lockdep Commit 5a505085f043 ("mm/rmap: Convert the struct anon_vma::mutex to an rwsem") turned anon_vma mutex to rwsem. However, the properly annotated nested locking in mm_take_all_locks() has been converted from mutex_lock_nest_lock(&anon_vma->root->mutex, &mm->mmap_sem); to down_write(&anon_vma->root->rwsem); which is incomplete, and causes the false positive report from lockdep below. Annotate the fact that mmap_sem is used as an outter lock to serialize taking of all the anon_vma rwsems at once no matter the order, using the down_write_nest_lock() primitive. This patch fixes this lockdep report: ============================================= [ INFO: possible recursive locking detected ] 3.8.0-rc2-00036-g5f73896 #171 Not tainted --------------------------------------------- qemu-kvm/2315 is trying to acquire lock: (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0 but task is already holding lock: (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&anon_vma->rwsem); lock(&anon_vma->rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by qemu-kvm/2315: #0: (&mm->mmap_sem){++++++}, at: do_mmu_notifier_register+0xfc/0x170 #1: (mm_all_locks_mutex){+.+...}, at: mm_take_all_locks+0x36/0x1b0 #2: (&mapping->i_mmap_mutex){+.+...}, at: mm_take_all_locks+0xc9/0x1b0 #3: (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0 stack backtrace: Pid: 2315, comm: qemu-kvm Not tainted 3.8.0-rc2-00036-g5f73896 #171 Call Trace: print_deadlock_bug+0xf2/0x100 validate_chain+0x4f6/0x720 __lock_acquire+0x359/0x580 lock_acquire+0x121/0x190 down_write+0x3f/0x70 mm_take_all_locks+0x149/0x1b0 do_mmu_notifier_register+0x68/0x170 mmu_notifier_register+0xe/0x10 kvm_create_vm+0x22b/0x330 [kvm] kvm_dev_ioctl+0xf8/0x1a0 [kvm] do_vfs_ioctl+0x9d/0x350 sys_ioctl+0x91/0xb0 system_call_fastpath+0x16/0x1b Signed-off-by: Jiri Kosina Cc: Rik van Riel Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Mel Gorman Tested-by: Sedat Dilek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/mmap.c b/mm/mmap.c index f54b235f29a9..35730ee9d515 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -2886,7 +2886,7 @@ static void vm_lock_anon_vma(struct mm_struct *mm, struct anon_vma *anon_vma) * The LSB of head.next can't change from under us * because we hold the mm_all_locks_mutex. */ - down_write(&anon_vma->root->rwsem); + down_write_nest_lock(&anon_vma->root->rwsem, &mm->mmap_sem); /* * We can safely modify head.next after taking the * anon_vma->root->rwsem. If some other vma in this mm shares From 062f1af2170afe817133d358d900a5f33e3856e4 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Fri, 11 Jan 2013 14:32:02 -0800 Subject: [PATCH 282/553] mm: thp: acquire the anon_vma rwsem for write during split Zhouping Liu reported the following against 3.8-rc1 when running a mmap testcase from LTP. mapcount 0 page_mapcount 3 ------------[ cut here ]------------ kernel BUG at mm/huge_memory.c:1798! invalid opcode: 0000 [#1] SMP Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables bnep bluetooth rfkill iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi vfat fat dm_mirror dm_region_hash dm_log dm_mod cdc_ether iTCO_wdt i7core_edac coretemp usbnet iTCO_vendor_support mii crc32c_intel edac_core lpc_ich shpchp ioatdma mfd_core i2c_i801 pcspkr serio_raw bnx2 microcode dca vhost_net tun macvtap macvlan kvm_intel kvm uinput mgag200 sr_mod cdrom i2c_algo_bit sd_mod drm_kms_helper crc_t10dif ata_generic pata_acpi ttm ata_piix drm libata i2c_core megaraid_sas CPU 1 Pid: 23217, comm: mmap10 Not tainted 3.8.0-rc1mainline+ #17 IBM IBM System x3400 M3 Server -[7379I08]-/69Y4356 RIP: __split_huge_page+0x677/0x6d0 RSP: 0000:ffff88017a03fc08 EFLAGS: 00010293 RAX: 0000000000000003 RBX: ffff88027a6c22e0 RCX: 00000000000034d2 RDX: 000000000000748b RSI: 0000000000000046 RDI: 0000000000000246 RBP: ffff88017a03fcb8 R08: ffffffff819d2440 R09: 000000000000054a R10: 0000000000aaaaaa R11: 00000000ffffffff R12: 0000000000000000 R13: 00007f4f11a00000 R14: ffff880179e96e00 R15: ffffea0005c08000 FS: 00007f4f11f4a740(0000) GS:ffff88017bc20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000037e9ebb404 CR3: 000000017a436000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process mmap10 (pid: 23217, threadinfo ffff88017a03e000, task ffff880172dd32e0) Stack: ffff88017a540ec8 ffff88017a03fc20 ffffffff816017b5 ffff88017a03fc88 ffffffff812fa014 0000000000000000 ffff880279ebd5c0 00000000f4f11a4c 00000007f4f11f49 00000007f4f11a00 ffff88017a540ef0 ffff88017a540ee8 Call Trace: split_huge_page+0x68/0xb0 __split_huge_page_pmd+0x134/0x330 split_huge_page_pmd_mm+0x51/0x60 split_huge_page_address+0x3b/0x50 __vma_adjust_trans_huge+0x9c/0xf0 vma_adjust+0x684/0x750 __split_vma.isra.28+0x1fa/0x220 do_munmap+0xf9/0x420 vm_munmap+0x4e/0x70 sys_munmap+0x2b/0x40 system_call_fastpath+0x16/0x1b Alexander Beregalov and Alex Xu reported similar bugs and Hillf Danton identified that commit 5a505085f043 ("mm/rmap: Convert the struct anon_vma::mutex to an rwsem") and commit 4fc3f1d66b1e ("mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable") were likely the problem. Reverting these commits was reported to solve the problem for Alexander. Despite the reason for these commits, NUMA balancing is not the direct source of the problem. split_huge_page() expects the anon_vma lock to be exclusive to serialise the whole split operation. Ordinarily it is expected that the anon_vma lock would only be required when updating the avcs but THP also uses the anon_vma rwsem for collapse and split operations where the page lock or compound lock cannot be used (as the page is changing from base to THP or vice versa) and the page table locks are insufficient. This patch takes the anon_vma lock for write to serialise against parallel split_huge_page as THP expected before the conversion to rwsem. Reported-and-tested-by: Zhouping Liu Reported-by: Alexander Beregalov Reported-by: Alex Xu Signed-off-by: Mel Gorman Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/huge_memory.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 9e894edc7811..6001ee6347a9 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -1819,9 +1819,19 @@ int split_huge_page(struct page *page) BUG_ON(is_huge_zero_pfn(page_to_pfn(page))); BUG_ON(!PageAnon(page)); - anon_vma = page_lock_anon_vma_read(page); + + /* + * The caller does not necessarily hold an mmap_sem that would prevent + * the anon_vma disappearing so we first we take a reference to it + * and then lock the anon_vma for write. This is similar to + * page_lock_anon_vma_read except the write lock is taken to serialise + * against parallel split or collapse operations. + */ + anon_vma = page_get_anon_vma(page); if (!anon_vma) goto out; + anon_vma_lock_write(anon_vma); + ret = 0; if (!PageCompound(page)) goto out_unlock; @@ -1832,7 +1842,8 @@ int split_huge_page(struct page *page) BUG_ON(PageCompound(page)); out_unlock: - page_unlock_anon_vma_read(anon_vma); + anon_vma_unlock(anon_vma); + put_anon_vma(anon_vma); out: return ret; } From 8fc8b12be13a2e8309a14ac44c4be733a76c12f8 Mon Sep 17 00:00:00 2001 From: Zhang Yanfei Date: Fri, 11 Jan 2013 14:32:03 -0800 Subject: [PATCH 283/553] MAINTAINERS: fix arch/arm/plat-omap/include/plat/omap_hwmod.h This file was moved to arch/arm/mach-omap2/omap=5Fhwmod.h by commit 2a296c8f89bc ("ARM: OMAP: Make plat/omap=5Fhwmod.h local to mach-omap2"). Signed-off-by: Zhang Yanfei Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3ab0949599cd..dfa1adae5592 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5507,8 +5507,7 @@ M: Benoît Cousson M: Paul Walmsley L: linux-omap@vger.kernel.org S: Maintained -F: arch/arm/mach-omap2/omap_hwmod.c -F: arch/arm/plat-omap/include/plat/omap_hwmod.h +F: arch/arm/mach-omap2/omap_hwmod.* OMAP HWMOD DATA FOR OMAP4-BASED DEVICES M: Benoît Cousson From 56ca9d98772c68368c929ab41d42108319a38da2 Mon Sep 17 00:00:00 2001 From: Zhang Yanfei Date: Fri, 11 Jan 2013 14:32:04 -0800 Subject: [PATCH 284/553] MAINTAINERS: fix a status pattern Change MAINTAINED to Maintained. Signed-off-by: Zhang Yanfei Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index dfa1adae5592..d57ce63ddef0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -648,7 +648,7 @@ F: arch/arm/ ARM SUB-ARCHITECTURES L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: MAINTAINED +S: Maintained F: arch/arm/mach-*/ F: arch/arm/plat-*/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git From 7b9205bd775afc4439ed86d617f9042ee9e76a71 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 11 Jan 2013 14:32:05 -0800 Subject: [PATCH 285/553] audit: create explicit AUDIT_SECCOMP event type The seccomp path was using AUDIT_ANOM_ABEND from when seccomp mode 1 could only kill a process. While we still want to make sure an audit record is forced on a kill, this should use a separate record type since seccomp mode 2 introduces other behaviors. In the case of "handled" behaviors (process wasn't killed), only emit a record if the process is under inspection. This change also fixes userspace examination of seccomp audit events, since it was considered malformed due to missing fields of the AUDIT_ANOM_ABEND event type. Signed-off-by: Kees Cook Cc: Al Viro Cc: Eric Paris Cc: Jeff Layton Cc: "Eric W. Biederman" Cc: Julien Tinnes Acked-by: Will Drewry Acked-by: Steve Grubb Cc: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/audit.h | 3 ++- include/uapi/linux/audit.h | 1 + kernel/auditsc.c | 14 +++++++++++--- 3 files changed, 14 insertions(+), 4 deletions(-) diff --git a/include/linux/audit.h b/include/linux/audit.h index bce729afbcf9..9d5104d7aba9 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -157,7 +157,8 @@ void audit_core_dumps(long signr); static inline void audit_seccomp(unsigned long syscall, long signr, int code) { - if (unlikely(!audit_dummy_context())) + /* Force a record to be reported if a signal was delivered. */ + if (signr || unlikely(!audit_dummy_context())) __audit_seccomp(syscall, signr, code); } diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index 76352ac45f24..09a2d94ab113 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -106,6 +106,7 @@ #define AUDIT_MMAP 1323 /* Record showing descriptor and flags in mmap */ #define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */ #define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */ +#define AUDIT_SECCOMP 1326 /* Secure Computing event */ #define AUDIT_AVC 1400 /* SE Linux avc denial or grant */ #define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */ diff --git a/kernel/auditsc.c b/kernel/auditsc.c index e37e6a12c5e3..3e46d1dec613 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -2675,7 +2675,7 @@ void __audit_mmap_fd(int fd, int flags) context->type = AUDIT_MMAP; } -static void audit_log_abend(struct audit_buffer *ab, char *reason, long signr) +static void audit_log_task(struct audit_buffer *ab) { kuid_t auid, uid; kgid_t gid; @@ -2693,6 +2693,11 @@ static void audit_log_abend(struct audit_buffer *ab, char *reason, long signr) audit_log_task_context(ab); audit_log_format(ab, " pid=%d comm=", current->pid); audit_log_untrustedstring(ab, current->comm); +} + +static void audit_log_abend(struct audit_buffer *ab, char *reason, long signr) +{ + audit_log_task(ab); audit_log_format(ab, " reason="); audit_log_string(ab, reason); audit_log_format(ab, " sig=%ld", signr); @@ -2723,8 +2728,11 @@ void __audit_seccomp(unsigned long syscall, long signr, int code) { struct audit_buffer *ab; - ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_ANOM_ABEND); - audit_log_abend(ab, "seccomp", signr); + ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_SECCOMP); + if (unlikely(!ab)) + return; + audit_log_task(ab); + audit_log_format(ab, " sig=%ld", signr); audit_log_format(ab, " syscall=%ld", syscall); audit_log_format(ab, " compat=%d", is_compat_task()); audit_log_format(ab, " ip=0x%lx", KSTK_EIP(current)); From 0644ec0cc8a33fb654e348897ad7684e22a4b5d8 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 11 Jan 2013 14:32:07 -0800 Subject: [PATCH 286/553] audit: catch possible NULL audit buffers It's possible for audit_log_start() to return NULL. Handle it in the various callers. Signed-off-by: Kees Cook Cc: Al Viro Cc: Eric Paris Cc: Jeff Layton Cc: "Eric W. Biederman" Cc: Julien Tinnes Cc: Will Drewry Cc: Steve Grubb Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/audit.c | 4 ++++ kernel/audit_tree.c | 26 +++++++++++++++++--------- kernel/audit_watch.c | 2 ++ kernel/auditsc.c | 6 ++++-- 4 files changed, 27 insertions(+), 11 deletions(-) diff --git a/kernel/audit.c b/kernel/audit.c index 40414e9143db..a219998aecc1 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -272,6 +272,8 @@ static int audit_log_config_change(char *function_name, int new, int old, int rc = 0; ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE); + if (unlikely(!ab)) + return rc; audit_log_format(ab, "%s=%d old=%d auid=%u ses=%u", function_name, new, old, from_kuid(&init_user_ns, loginuid), sessionid); if (sid) { @@ -619,6 +621,8 @@ static int audit_log_common_recv_msg(struct audit_buffer **ab, u16 msg_type, } *ab = audit_log_start(NULL, GFP_KERNEL, msg_type); + if (unlikely(!*ab)) + return rc; audit_log_format(*ab, "pid=%d uid=%u auid=%u ses=%u", task_tgid_vnr(current), from_kuid(&init_user_ns, current_uid()), diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index e81175ef25f8..642a89c4f3d6 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -449,11 +449,26 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) return 0; } +static void audit_log_remove_rule(struct audit_krule *rule) +{ + struct audit_buffer *ab; + + ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE); + if (unlikely(!ab)) + return; + audit_log_format(ab, "op="); + audit_log_string(ab, "remove rule"); + audit_log_format(ab, " dir="); + audit_log_untrustedstring(ab, rule->tree->pathname); + audit_log_key(ab, rule->filterkey); + audit_log_format(ab, " list=%d res=1", rule->listnr); + audit_log_end(ab); +} + static void kill_rules(struct audit_tree *tree) { struct audit_krule *rule, *next; struct audit_entry *entry; - struct audit_buffer *ab; list_for_each_entry_safe(rule, next, &tree->rules, rlist) { entry = container_of(rule, struct audit_entry, rule); @@ -461,14 +476,7 @@ static void kill_rules(struct audit_tree *tree) list_del_init(&rule->rlist); if (rule->tree) { /* not a half-baked one */ - ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE); - audit_log_format(ab, "op="); - audit_log_string(ab, "remove rule"); - audit_log_format(ab, " dir="); - audit_log_untrustedstring(ab, rule->tree->pathname); - audit_log_key(ab, rule->filterkey); - audit_log_format(ab, " list=%d res=1", rule->listnr); - audit_log_end(ab); + audit_log_remove_rule(rule); rule->tree = NULL; list_del_rcu(&entry->list); list_del(&entry->rule.list); diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c index 4a599f699adc..22831c4d369c 100644 --- a/kernel/audit_watch.c +++ b/kernel/audit_watch.c @@ -240,6 +240,8 @@ static void audit_watch_log_rule_change(struct audit_krule *r, struct audit_watc if (audit_enabled) { struct audit_buffer *ab; ab = audit_log_start(NULL, GFP_NOFS, AUDIT_CONFIG_CHANGE); + if (unlikely(!ab)) + return; audit_log_format(ab, "auid=%u ses=%u op=", from_kuid(&init_user_ns, audit_get_loginuid(current)), audit_get_sessionid(current)); diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 3e46d1dec613..a371f857a0a9 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -1464,14 +1464,14 @@ static void show_special(struct audit_context *context, int *call_panic) audit_log_end(ab); ab = audit_log_start(context, GFP_KERNEL, AUDIT_IPC_SET_PERM); + if (unlikely(!ab)) + return; audit_log_format(ab, "qbytes=%lx ouid=%u ogid=%u mode=%#ho", context->ipc.qbytes, context->ipc.perm_uid, context->ipc.perm_gid, context->ipc.perm_mode); - if (!ab) - return; } break; } case AUDIT_MQ_OPEN: { @@ -2720,6 +2720,8 @@ void audit_core_dumps(long signr) return; ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_ANOM_ABEND); + if (unlikely(!ab)) + return; audit_log_abend(ab, "memory violation", signr); audit_log_end(ab); } From 829199197a430dade2519d54f5545c4a094393b8 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 11 Jan 2013 14:32:11 -0800 Subject: [PATCH 287/553] kernel/audit.c: avoid negative sleep durations audit_log_start() performs the same jiffies comparison in two places. If sufficient time has elapsed between the two comparisons, the second one produces a negative sleep duration: schedule_timeout: wrong timeout value fffffffffffffff0 Pid: 6606, comm: trinity-child1 Not tainted 3.8.0-rc1+ #43 Call Trace: schedule_timeout+0x305/0x340 audit_log_start+0x311/0x470 audit_log_exit+0x4b/0xfb0 __audit_syscall_exit+0x25f/0x2c0 sysret_audit+0x17/0x21 Fix it by performing the comparison a single time. Reported-by: Dave Jones Cc: Al Viro Cc: Eric Paris Reviewed-by: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/audit.c | 36 +++++++++++++++++++++++------------- 1 file changed, 23 insertions(+), 13 deletions(-) diff --git a/kernel/audit.c b/kernel/audit.c index a219998aecc1..d596e5355f15 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -1101,6 +1101,23 @@ static inline void audit_get_stamp(struct audit_context *ctx, } } +/* + * Wait for auditd to drain the queue a little + */ +static void wait_for_auditd(unsigned long sleep_time) +{ + DECLARE_WAITQUEUE(wait, current); + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&audit_backlog_wait, &wait); + + if (audit_backlog_limit && + skb_queue_len(&audit_skb_queue) > audit_backlog_limit) + schedule_timeout(sleep_time); + + __set_current_state(TASK_RUNNING); + remove_wait_queue(&audit_backlog_wait, &wait); +} + /* Obtain an audit buffer. This routine does locking to obtain the * audit buffer, but then no locking is required for calls to * audit_log_*format. If the tsk is a task that is currently in a @@ -1146,20 +1163,13 @@ struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask, while (audit_backlog_limit && skb_queue_len(&audit_skb_queue) > audit_backlog_limit + reserve) { - if (gfp_mask & __GFP_WAIT && audit_backlog_wait_time - && time_before(jiffies, timeout_start + audit_backlog_wait_time)) { + if (gfp_mask & __GFP_WAIT && audit_backlog_wait_time) { + unsigned long sleep_time; - /* Wait for auditd to drain the queue a little */ - DECLARE_WAITQUEUE(wait, current); - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&audit_backlog_wait, &wait); - - if (audit_backlog_limit && - skb_queue_len(&audit_skb_queue) > audit_backlog_limit) - schedule_timeout(timeout_start + audit_backlog_wait_time - jiffies); - - __set_current_state(TASK_RUNNING); - remove_wait_queue(&audit_backlog_wait, &wait); + sleep_time = timeout_start + audit_backlog_wait_time - + jiffies; + if ((long)sleep_time > 0) + wait_for_auditd(sleep_time); continue; } if (audit_rate_check() && printk_ratelimit()) From c0a3a20b6c4b5229ef5d26fd9b1c4b1957632aa7 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 11 Jan 2013 14:32:13 -0800 Subject: [PATCH 288/553] linux/audit.h: move ptrace.h include to kernel header While the kernel internals want pt_regs (and so it includes linux/ptrace.h), the user version of audit.h does not need it. So move the include out of the uapi version. This avoids issues where people want the audit defines and userland ptrace api. Including both the kernel ptrace and the userland ptrace headers can easily lead to failure. Signed-off-by: Mike Frysinger Cc: Eric Paris Cc: Al Viro Reviewed-by: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/audit.h | 1 + include/uapi/linux/audit.h | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/audit.h b/include/linux/audit.h index 9d5104d7aba9..5a6d718adf34 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -24,6 +24,7 @@ #define _LINUX_AUDIT_H_ #include +#include #include struct audit_sig_info { diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index 09a2d94ab113..9f096f1c0907 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -26,7 +26,6 @@ #include #include -#include /* The netlink messages for the audit system is divided into blocks: * 1000 - 1099 are for commanding the audit system From 8fb74b9fb2b182d54beee592350d9ea1f325917a Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Fri, 11 Jan 2013 14:32:16 -0800 Subject: [PATCH 289/553] mm: compaction: partially revert capture of suitable high-order page Eric Wong reported on 3.7 and 3.8-rc2 that ppoll() got stuck when waiting for POLLIN on a local TCP socket. It was easier to trigger if there was disk IO and dirty pages at the same time and he bisected it to commit 1fb3f8ca0e92 ("mm: compaction: capture a suitable high-order page immediately when it is made available"). The intention of that patch was to improve high-order allocations under memory pressure after changes made to reclaim in 3.6 drastically hurt THP allocations but the approach was flawed. For Eric, the problem was that page->pfmemalloc was not being cleared for captured pages leading to a poor interaction with swap-over-NFS support causing the packets to be dropped. However, I identified a few more problems with the patch including the fact that it can increase contention on zone->lock in some cases which could result in async direct compaction being aborted early. In retrospect the capture patch took the wrong approach. What it should have done is mark the pageblock being migrated as MIGRATE_ISOLATE if it was allocating for THP and avoided races that way. While the patch was showing to improve allocation success rates at the time, the benefit is marginal given the relative complexity and it should be revisited from scratch in the context of the other reclaim-related changes that have taken place since the patch was first written and tested. This patch partially reverts commit 1fb3f8ca0e92 ("mm: compaction: capture a suitable high-order page immediately when it is made available"). Reported-and-tested-by: Eric Wong Tested-by: Eric Dumazet Cc: Signed-off-by: Mel Gorman Cc: David Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/compaction.h | 4 +- include/linux/mm.h | 1 - mm/compaction.c | 92 ++++++-------------------------------- mm/internal.h | 1 - mm/page_alloc.c | 35 ++++----------- 5 files changed, 23 insertions(+), 110 deletions(-) diff --git a/include/linux/compaction.h b/include/linux/compaction.h index 6ecb6dc2f303..cc7bddeaf553 100644 --- a/include/linux/compaction.h +++ b/include/linux/compaction.h @@ -22,7 +22,7 @@ extern int sysctl_extfrag_handler(struct ctl_table *table, int write, extern int fragmentation_index(struct zone *zone, unsigned int order); extern unsigned long try_to_compact_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask, nodemask_t *mask, - bool sync, bool *contended, struct page **page); + bool sync, bool *contended); extern int compact_pgdat(pg_data_t *pgdat, int order); extern void reset_isolation_suitable(pg_data_t *pgdat); extern unsigned long compaction_suitable(struct zone *zone, int order); @@ -75,7 +75,7 @@ static inline bool compaction_restarting(struct zone *zone, int order) #else static inline unsigned long try_to_compact_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask, nodemask_t *nodemask, - bool sync, bool *contended, struct page **page) + bool sync, bool *contended) { return COMPACT_CONTINUE; } diff --git a/include/linux/mm.h b/include/linux/mm.h index 63204078f72b..66e2f7c61e5c 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -455,7 +455,6 @@ void put_pages_list(struct list_head *pages); void split_page(struct page *page, unsigned int order); int split_free_page(struct page *page); -int capture_free_page(struct page *page, int alloc_order, int migratetype); /* * Compound pages have a destructor function. Provide a diff --git a/mm/compaction.c b/mm/compaction.c index f8f5c111b7d7..c62bd063d766 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -816,6 +816,7 @@ static isolate_migrate_t isolate_migratepages(struct zone *zone, static int compact_finished(struct zone *zone, struct compact_control *cc) { + unsigned int order; unsigned long watermark; if (fatal_signal_pending(current)) @@ -850,22 +851,16 @@ static int compact_finished(struct zone *zone, return COMPACT_CONTINUE; /* Direct compactor: Is a suitable page free? */ - if (cc->page) { - /* Was a suitable page captured? */ - if (*cc->page) - return COMPACT_PARTIAL; - } else { - unsigned int order; - for (order = cc->order; order < MAX_ORDER; order++) { - struct free_area *area = &zone->free_area[cc->order]; - /* Job done if page is free of the right migratetype */ - if (!list_empty(&area->free_list[cc->migratetype])) - return COMPACT_PARTIAL; + for (order = cc->order; order < MAX_ORDER; order++) { + struct free_area *area = &zone->free_area[order]; - /* Job done if allocation would set block type */ - if (cc->order >= pageblock_order && area->nr_free) - return COMPACT_PARTIAL; - } + /* Job done if page is free of the right migratetype */ + if (!list_empty(&area->free_list[cc->migratetype])) + return COMPACT_PARTIAL; + + /* Job done if allocation would set block type */ + if (cc->order >= pageblock_order && area->nr_free) + return COMPACT_PARTIAL; } return COMPACT_CONTINUE; @@ -921,60 +916,6 @@ unsigned long compaction_suitable(struct zone *zone, int order) return COMPACT_CONTINUE; } -static void compact_capture_page(struct compact_control *cc) -{ - unsigned long flags; - int mtype, mtype_low, mtype_high; - - if (!cc->page || *cc->page) - return; - - /* - * For MIGRATE_MOVABLE allocations we capture a suitable page ASAP - * regardless of the migratetype of the freelist is is captured from. - * This is fine because the order for a high-order MIGRATE_MOVABLE - * allocation is typically at least a pageblock size and overall - * fragmentation is not impaired. Other allocation types must - * capture pages from their own migratelist because otherwise they - * could pollute other pageblocks like MIGRATE_MOVABLE with - * difficult to move pages and making fragmentation worse overall. - */ - if (cc->migratetype == MIGRATE_MOVABLE) { - mtype_low = 0; - mtype_high = MIGRATE_PCPTYPES; - } else { - mtype_low = cc->migratetype; - mtype_high = cc->migratetype + 1; - } - - /* Speculatively examine the free lists without zone lock */ - for (mtype = mtype_low; mtype < mtype_high; mtype++) { - int order; - for (order = cc->order; order < MAX_ORDER; order++) { - struct page *page; - struct free_area *area; - area = &(cc->zone->free_area[order]); - if (list_empty(&area->free_list[mtype])) - continue; - - /* Take the lock and attempt capture of the page */ - if (!compact_trylock_irqsave(&cc->zone->lock, &flags, cc)) - return; - if (!list_empty(&area->free_list[mtype])) { - page = list_entry(area->free_list[mtype].next, - struct page, lru); - if (capture_free_page(page, cc->order, mtype)) { - spin_unlock_irqrestore(&cc->zone->lock, - flags); - *cc->page = page; - return; - } - } - spin_unlock_irqrestore(&cc->zone->lock, flags); - } - } -} - static int compact_zone(struct zone *zone, struct compact_control *cc) { int ret; @@ -1054,9 +995,6 @@ static int compact_zone(struct zone *zone, struct compact_control *cc) goto out; } } - - /* Capture a page now if it is a suitable size */ - compact_capture_page(cc); } out: @@ -1069,8 +1007,7 @@ out: static unsigned long compact_zone_order(struct zone *zone, int order, gfp_t gfp_mask, - bool sync, bool *contended, - struct page **page) + bool sync, bool *contended) { unsigned long ret; struct compact_control cc = { @@ -1080,7 +1017,6 @@ static unsigned long compact_zone_order(struct zone *zone, .migratetype = allocflags_to_migratetype(gfp_mask), .zone = zone, .sync = sync, - .page = page, }; INIT_LIST_HEAD(&cc.freepages); INIT_LIST_HEAD(&cc.migratepages); @@ -1110,7 +1046,7 @@ int sysctl_extfrag_threshold = 500; */ unsigned long try_to_compact_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask, nodemask_t *nodemask, - bool sync, bool *contended, struct page **page) + bool sync, bool *contended) { enum zone_type high_zoneidx = gfp_zone(gfp_mask); int may_enter_fs = gfp_mask & __GFP_FS; @@ -1136,7 +1072,7 @@ unsigned long try_to_compact_pages(struct zonelist *zonelist, int status; status = compact_zone_order(zone, order, gfp_mask, sync, - contended, page); + contended); rc = max(status, rc); /* If a normal allocation would succeed, stop compacting */ @@ -1192,7 +1128,6 @@ int compact_pgdat(pg_data_t *pgdat, int order) struct compact_control cc = { .order = order, .sync = false, - .page = NULL, }; return __compact_pgdat(pgdat, &cc); @@ -1203,7 +1138,6 @@ static int compact_node(int nid) struct compact_control cc = { .order = -1, .sync = true, - .page = NULL, }; return __compact_pgdat(NODE_DATA(nid), &cc); diff --git a/mm/internal.h b/mm/internal.h index d597f94cc205..9ba21100ebf3 100644 --- a/mm/internal.h +++ b/mm/internal.h @@ -135,7 +135,6 @@ struct compact_control { int migratetype; /* MOVABLE, RECLAIMABLE etc */ struct zone *zone; bool contended; /* True if a lock was contended */ - struct page **page; /* Page captured of requested size */ }; unsigned long diff --git a/mm/page_alloc.c b/mm/page_alloc.c index c957805a7f0e..df2022ff0c8a 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1384,14 +1384,8 @@ void split_page(struct page *page, unsigned int order) set_page_refcounted(page + i); } -/* - * Similar to the split_page family of functions except that the page - * required at the given order and being isolated now to prevent races - * with parallel allocators - */ -int capture_free_page(struct page *page, int alloc_order, int migratetype) +static int __isolate_free_page(struct page *page, unsigned int order) { - unsigned int order; unsigned long watermark; struct zone *zone; int mt; @@ -1399,7 +1393,6 @@ int capture_free_page(struct page *page, int alloc_order, int migratetype) BUG_ON(!PageBuddy(page)); zone = page_zone(page); - order = page_order(page); mt = get_pageblock_migratetype(page); if (mt != MIGRATE_ISOLATE) { @@ -1408,7 +1401,7 @@ int capture_free_page(struct page *page, int alloc_order, int migratetype) if (!zone_watermark_ok(zone, 0, watermark, 0, 0)) return 0; - __mod_zone_freepage_state(zone, -(1UL << alloc_order), mt); + __mod_zone_freepage_state(zone, -(1UL << order), mt); } /* Remove page from free list */ @@ -1416,11 +1409,7 @@ int capture_free_page(struct page *page, int alloc_order, int migratetype) zone->free_area[order].nr_free--; rmv_page_order(page); - if (alloc_order != order) - expand(zone, page, alloc_order, order, - &zone->free_area[order], migratetype); - - /* Set the pageblock if the captured page is at least a pageblock */ + /* Set the pageblock if the isolated page is at least a pageblock */ if (order >= pageblock_order - 1) { struct page *endpage = page + (1 << order) - 1; for (; page < endpage; page += pageblock_nr_pages) { @@ -1431,7 +1420,7 @@ int capture_free_page(struct page *page, int alloc_order, int migratetype) } } - return 1UL << alloc_order; + return 1UL << order; } /* @@ -1449,10 +1438,9 @@ int split_free_page(struct page *page) unsigned int order; int nr_pages; - BUG_ON(!PageBuddy(page)); order = page_order(page); - nr_pages = capture_free_page(page, order, 0); + nr_pages = __isolate_free_page(page, order); if (!nr_pages) return 0; @@ -2136,8 +2124,6 @@ __alloc_pages_direct_compact(gfp_t gfp_mask, unsigned int order, bool *contended_compaction, bool *deferred_compaction, unsigned long *did_some_progress) { - struct page *page = NULL; - if (!order) return NULL; @@ -2149,16 +2135,12 @@ __alloc_pages_direct_compact(gfp_t gfp_mask, unsigned int order, current->flags |= PF_MEMALLOC; *did_some_progress = try_to_compact_pages(zonelist, order, gfp_mask, nodemask, sync_migration, - contended_compaction, &page); + contended_compaction); current->flags &= ~PF_MEMALLOC; - /* If compaction captured a page, prep and use it */ - if (page) { - prep_new_page(page, order, gfp_mask); - goto got_page; - } - if (*did_some_progress != COMPACT_SKIPPED) { + struct page *page; + /* Page migration frees to the PCP lists but we want merging */ drain_pages(get_cpu()); put_cpu(); @@ -2168,7 +2150,6 @@ __alloc_pages_direct_compact(gfp_t gfp_mask, unsigned int order, alloc_flags & ~ALLOC_NO_WATERMARKS, preferred_zone, migratetype); if (page) { -got_page: preferred_zone->compact_blockskip_flush = false; preferred_zone->compact_considered = 0; preferred_zone->compact_defer_shift = 0; From a8906b0b673a8a64ae1446a7847def62388f6e46 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Fri, 11 Jan 2013 14:32:17 -0800 Subject: [PATCH 290/553] MAINTAINERS: Omar had moved Signed-off-by: Chen Gang Cc: Omar Ramirez Luna Cc: Omar Ramirez Luna Cc: David Miller Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index d57ce63ddef0..51ff2aea8a32 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7333,7 +7333,7 @@ S: Odd Fixes F: drivers/staging/speakup/ STAGING - TI DSP BRIDGE DRIVERS -M: Omar Ramirez Luna +M: Omar Ramirez Luna S: Odd Fixes F: drivers/staging/tidspbridge/ From 3cb7a56344ca45ee56d71c5f8fe9f922306bff1f Mon Sep 17 00:00:00 2001 From: Michel Lespinasse Date: Fri, 11 Jan 2013 14:32:20 -0800 Subject: [PATCH 291/553] lib/rbtree.c: avoid the use of non-static __always_inline lib/rbtree.c declared __rb_erase_color() as __always_inline void, and then exported it with EXPORT_SYMBOL. This was because __rb_erase_color() must be exported for augmented rbtree users, but it must also be inlined into rb_erase() so that the dummy callback can get optimized out of that call site. (Actually with a modern compiler, none of the dummy callback functions should even be generated as separate text functions). The above usage is legal C, but it was unusual enough for some compilers to warn about it. This change makes things more explicit, with a static __always_inline ____rb_erase_color function for use in rb_erase(), and a separate non-inline __rb_erase_color function for use in rb_erase_augmented call sites. Signed-off-by: Michel Lespinasse Reported-by: Wu Fengguang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/rbtree_augmented.h | 14 +++++++++++--- lib/rbtree.c | 20 +++++++++++++++++--- 2 files changed, 28 insertions(+), 6 deletions(-) diff --git a/include/linux/rbtree_augmented.h b/include/linux/rbtree_augmented.h index 2ac60c9cf644..fea49b5da12a 100644 --- a/include/linux/rbtree_augmented.h +++ b/include/linux/rbtree_augmented.h @@ -123,9 +123,9 @@ __rb_change_child(struct rb_node *old, struct rb_node *new, extern void __rb_erase_color(struct rb_node *parent, struct rb_root *root, void (*augment_rotate)(struct rb_node *old, struct rb_node *new)); -static __always_inline void -rb_erase_augmented(struct rb_node *node, struct rb_root *root, - const struct rb_augment_callbacks *augment) +static __always_inline struct rb_node * +__rb_erase_augmented(struct rb_node *node, struct rb_root *root, + const struct rb_augment_callbacks *augment) { struct rb_node *child = node->rb_right, *tmp = node->rb_left; struct rb_node *parent, *rebalance; @@ -217,6 +217,14 @@ rb_erase_augmented(struct rb_node *node, struct rb_root *root, } augment->propagate(tmp, NULL); + return rebalance; +} + +static __always_inline void +rb_erase_augmented(struct rb_node *node, struct rb_root *root, + const struct rb_augment_callbacks *augment) +{ + struct rb_node *rebalance = __rb_erase_augmented(node, root, augment); if (rebalance) __rb_erase_color(rebalance, root, augment->rotate); } diff --git a/lib/rbtree.c b/lib/rbtree.c index 4f56a11d67fa..c0e31fe2fabf 100644 --- a/lib/rbtree.c +++ b/lib/rbtree.c @@ -194,8 +194,12 @@ __rb_insert(struct rb_node *node, struct rb_root *root, } } -__always_inline void -__rb_erase_color(struct rb_node *parent, struct rb_root *root, +/* + * Inline version for rb_erase() use - we want to be able to inline + * and eliminate the dummy_rotate callback there + */ +static __always_inline void +____rb_erase_color(struct rb_node *parent, struct rb_root *root, void (*augment_rotate)(struct rb_node *old, struct rb_node *new)) { struct rb_node *node = NULL, *sibling, *tmp1, *tmp2; @@ -355,6 +359,13 @@ __rb_erase_color(struct rb_node *parent, struct rb_root *root, } } } + +/* Non-inline version for rb_erase_augmented() use */ +void __rb_erase_color(struct rb_node *parent, struct rb_root *root, + void (*augment_rotate)(struct rb_node *old, struct rb_node *new)) +{ + ____rb_erase_color(parent, root, augment_rotate); +} EXPORT_SYMBOL(__rb_erase_color); /* @@ -380,7 +391,10 @@ EXPORT_SYMBOL(rb_insert_color); void rb_erase(struct rb_node *node, struct rb_root *root) { - rb_erase_augmented(node, root, &dummy_callbacks); + struct rb_node *rebalance; + rebalance = __rb_erase_augmented(node, root, &dummy_callbacks); + if (rebalance) + ____rb_erase_color(rebalance, root, dummy_rotate); } EXPORT_SYMBOL(rb_erase); From f7e9e230f41f991a6e3e7cb6096424fdfb626081 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Thu, 10 Jan 2013 22:52:54 +0000 Subject: [PATCH 292/553] qlge: remove NETIF_F_TSO6 flag It is werid that qlge driver supports NETIF_F_TSO6 but not NETIF_F_IPV6_CSUM. This also causes some kernel warning [1] when VLAN device setups on a qlge interface. I think the qlge hardware doesn't support NETIF_F_IPV6_CSUM, so we have to just remove the NETIF_F_TSO6 flag. After this patch, the TCP/IPv6 traffic becomes normal again, no kernel warnings any more. NOTE: I only tested it on 2.6.32 kernel, even if the upstream kernel could fix this automatically (it is hard to track NETIF* flags), removing it is also safe. 1. https://bugzilla.redhat.com/show_bug.cgi?id=891839 Cc: Jitendra Kalsaria Cc: Ron Mercer Cc: linux-driver@qlogic.com Cc: David S. Miller Signed-off-by: Cong Wang Acked-by: Jitendra Kalsaria Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlge/qlge_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index f80cd975daed..3e73742024b0 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -4678,7 +4678,7 @@ static int qlge_probe(struct pci_dev *pdev, qdev = netdev_priv(ndev); SET_NETDEV_DEV(ndev, &pdev->dev); ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | - NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN | + NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_HW_VLAN_TX | NETIF_F_RXCSUM; ndev->features = ndev->hw_features | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER; From d07d7507bfb4e23735c9b83e397c43e1e8a173e8 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 10 Jan 2013 23:19:10 +0000 Subject: [PATCH 293/553] net, wireless: overwrite default_ethtool_ops Since: commit 2c60db037034d27f8c636403355d52872da92f81 Author: Eric Dumazet Date: Sun Sep 16 09:17:26 2012 +0000 net: provide a default dev->ethtool_ops wireless core does not correctly assign ethtool_ops. After alloc_netdev*() call, some cfg80211 drivers provide they own ethtool_ops, but some do not. For them, wireless core provide generic cfg80211_ethtool_ops, which is assigned in NETDEV_REGISTER notify call: if (!dev->ethtool_ops) dev->ethtool_ops = &cfg80211_ethtool_ops; But after Eric's commit, dev->ethtool_ops is no longer NULL (on cfg80211 drivers without custom ethtool_ops), but points to &default_ethtool_ops. In order to fix the problem, provide function which will overwrite default_ethtool_ops and use it by wireless core. Signed-off-by: Stanislaw Gruszka Acked-by: Johannes Berg Acked-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/netdevice.h | 3 +++ net/core/dev.c | 8 ++++++++ net/wireless/core.c | 3 +-- 3 files changed, 12 insertions(+), 2 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index c599e4782d45..9ef07d0868b6 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -60,6 +60,9 @@ struct wireless_dev; #define SET_ETHTOOL_OPS(netdev,ops) \ ( (netdev)->ethtool_ops = (ops) ) +extern void netdev_set_default_ethtool_ops(struct net_device *dev, + const struct ethtool_ops *ops); + /* hardware address assignment types */ #define NET_ADDR_PERM 0 /* address is permanent (default) */ #define NET_ADDR_RANDOM 1 /* address is generated randomly */ diff --git a/net/core/dev.c b/net/core/dev.c index 515473ee52cb..f64e439b4a00 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -6121,6 +6121,14 @@ struct netdev_queue *dev_ingress_queue_create(struct net_device *dev) static const struct ethtool_ops default_ethtool_ops; +void netdev_set_default_ethtool_ops(struct net_device *dev, + const struct ethtool_ops *ops) +{ + if (dev->ethtool_ops == &default_ethtool_ops) + dev->ethtool_ops = ops; +} +EXPORT_SYMBOL_GPL(netdev_set_default_ethtool_ops); + /** * alloc_netdev_mqs - allocate network device * @sizeof_priv: size of private data to allocate space for diff --git a/net/wireless/core.c b/net/wireless/core.c index 14d990400354..b677eab55b68 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -866,8 +866,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb, /* allow mac80211 to determine the timeout */ wdev->ps_timeout = -1; - if (!dev->ethtool_ops) - dev->ethtool_ops = &cfg80211_ethtool_ops; + netdev_set_default_ethtool_ops(dev, &cfg80211_ethtool_ops); if ((wdev->iftype == NL80211_IFTYPE_STATION || wdev->iftype == NL80211_IFTYPE_P2P_CLIENT || From 544ae6b2e676c3c37fb8c93ef9327932fc2e5bc2 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Fri, 11 Jan 2013 15:08:30 +0100 Subject: [PATCH 294/553] ARM: at91/dts: add pinctrl support for SSC peripheral Add pinctrl support for SSC on AT91 dtsi files. Signed-off-by: Bo Shen [nicolas.ferre@atmel.com: split dtsi and driver changes] Signed-off-by: Nicolas Ferre Reluctantly-acked-by: Olof Johansson Signed-off-by: Mark Brown --- arch/arm/boot/dts/at91sam9260.dtsi | 18 +++++++++++++++ arch/arm/boot/dts/at91sam9263.dtsi | 36 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9g45.dtsi | 36 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9n12.dtsi | 26 +++++++++++++++++++++ arch/arm/boot/dts/at91sam9x5.dtsi | 32 ++++++++++++++++++++------ 5 files changed, 141 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 68bccf41a2c6..cb7bcc51608d 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -306,6 +306,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <1 16 0x1 0x0 /* PB16 periph A */ + 1 17 0x1 0x0 /* PB17 periph A */ + 1 18 0x1 0x0>; /* PB18 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <1 19 0x1 0x0 /* PB19 periph A */ + 1 20 0x1 0x0 /* PB20 periph A */ + 1 21 0x1 0x0>; /* PB21 periph A */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -450,6 +466,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; interrupts = <14 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 32ec62cf5385..271d4de026e9 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -271,6 +271,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <1 0 0x2 0x0 /* PB0 periph B */ + 1 1 0x2 0x0 /* PB1 periph B */ + 1 2 0x2 0x0>; /* PB2 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <1 3 0x2 0x0 /* PB3 periph B */ + 1 4 0x2 0x0 /* PB4 periph B */ + 1 5 0x2 0x0>; /* PB5 periph B */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <1 6 0x1 0x0 /* PB6 periph A */ + 1 7 0x1 0x0 /* PB7 periph A */ + 1 8 0x1 0x0>; /* PB8 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <1 9 0x1 0x0 /* PB9 periph A */ + 1 10 0x1 0x0 /* PB10 periph A */ + 1 11 0x1 0x0>; /* PB11 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -368,6 +400,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; @@ -375,6 +409,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <17 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 231858ffd850..6b1d4cab24c2 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -290,6 +290,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <3 0 0x1 0x0 /* PD0 periph A */ + 3 1 0x1 0x0 /* PD1 periph A */ + 3 2 0x1 0x0>; /* PD2 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <3 3 0x1 0x0 /* PD3 periph A */ + 3 4 0x1 0x0 /* PD4 periph A */ + 3 5 0x1 0x0>; /* PD5 periph A */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <3 10 0x1 0x0 /* PD10 periph A */ + 3 11 0x1 0x0 /* PD11 periph A */ + 3 12 0x1 0x0>; /* PD12 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <3 13 0x1 0x0 /* PD13 periph A */ + 3 14 0x1 0x0 /* PD14 periph A */ + 3 15 0x1 0x0>; /* PD15 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -425,6 +457,8 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; @@ -432,6 +466,8 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; interrupts = <17 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index e9efb34f4379..80e29c605d4e 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -28,6 +28,7 @@ tcb1 = &tcb1; i2c0 = &i2c0; i2c1 = &i2c1; + ssc0 = &ssc0; }; cpus { cpu@0 { @@ -244,6 +245,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0>; /* PA26 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -294,6 +311,15 @@ status = "disabled"; }; + ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 40ac3a4eb1ab..3a47cf952146 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -88,13 +88,6 @@ interrupts = <1 4 7>; }; - ssc0: ssc@f0010000 { - compatible = "atmel,at91sam9g45-ssc"; - reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; - status = "disabled"; - }; - tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; @@ -290,6 +283,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0>; /* PA26 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -333,6 +342,15 @@ }; }; + ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; From ea03c81521bde526570e1dec96eaa21fe5ac84a2 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Fri, 11 Jan 2013 15:08:31 +0100 Subject: [PATCH 295/553] ASoC: atmel-ssc: add pinctrl selection to driver Add default pinctrl selection to atmel-ssc driver. The pinctrl is mandatory. Signed-off-by: Bo Shen [nicolas.ferre@atmel.com: split dtsi and driver changes] Signed-off-by: Nicolas Ferre Signed-off-by: Mark Brown --- drivers/misc/atmel-ssc.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index 158da5a81a66..3c09cbb70b1d 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -19,6 +19,7 @@ #include #include +#include /* Serialize access to ssc_list and user count */ static DEFINE_SPINLOCK(user_lock); @@ -131,6 +132,13 @@ static int ssc_probe(struct platform_device *pdev) struct resource *regs; struct ssc_device *ssc; const struct atmel_ssc_platform_data *plat_dat; + struct pinctrl *pinctrl; + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + dev_err(&pdev->dev, "Failed to request pinctrl\n"); + return PTR_ERR(pinctrl); + } ssc = devm_kzalloc(&pdev->dev, sizeof(struct ssc_device), GFP_KERNEL); if (!ssc) { From eb614c8b467f7f309541e6e6be9d27a9cf6badd5 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 11 Jan 2013 18:06:21 +0100 Subject: [PATCH 296/553] USB: select USB_ARCH_HAS_EHCI for MXS Commit 09f6ffde (USB: EHCI: fix build error by making ChipIdea host a normal EHCI driver) introduced a dependency on USB_EHCI_HCD for the chipidea USB host driver, that in turns depends on USB_ARCH_HAS_EHCI. If this symbol is not set for MXS, the MXS boards are not able to use the chipidea driver anymore. Signed-off-by: Maxime Ripard Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 4c90b510d016..640ae6c6d2d2 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -37,6 +37,7 @@ config USB_ARCH_HAS_EHCI default y if ARCH_W90X900 default y if ARCH_AT91 default y if ARCH_MXC + default y if ARCH_MXS default y if ARCH_OMAP3 default y if ARCH_CNS3XXX default y if ARCH_VT8500 From 7c1029ba17f3d2596b05a6521d438c9bdc09a673 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 4 Dec 2012 14:23:21 +0100 Subject: [PATCH 297/553] USB: fsl-mph-dr-of: fix regression on mpc5121e fsl-ehci probing fails on mpc5121e: ... ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: Could not get controller version fsl-ehci fsl-ehci.0: can't setup fsl-ehci fsl-ehci.0: USB bus 1 deregistered fsl-ehci fsl-ehci.0: init fsl-ehci.0 fail, -22 fsl-ehci: probe of fsl-ehci.0 failed with error -22 Fix it by returning appropriate version info for mpc5121, too. Signed-off-by: Anatolij Gustschin Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/fsl-mph-dr-of.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index 5105127c1d4b..11e0b79ff9d5 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -142,6 +142,9 @@ static int usb_get_ver_info(struct device_node *np) return ver; } + if (of_device_is_compatible(np, "fsl,mpc5121-usb2-dr")) + return FSL_USB_VER_OLD; + if (of_device_is_compatible(np, "fsl-usb2-mph")) { if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6")) ver = FSL_USB_VER_1_6; From 929473ea05db455ad88cdc081f2adc556b8dc48f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 22 Dec 2012 09:24:11 -0200 Subject: [PATCH 298/553] usb: chipidea: Allow disabling streaming not only in udc mode When running a scp transfer using a USB/Ethernet adapter the following crash happens: $ scp test.tar.gz fabio@192.168.1.100:/home/fabio fabio@192.168.1.100's password: test.tar.gz 0% 0 0.0KB/s --:-- ETA ------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x2cc/0x2f0() NETDEV WATCHDOG: eth0 (asix): transmit queue 0 timed out Modules linked in: Backtrace: [<80011c94>] (dump_backtrace+0x0/0x10c) from [<804d3a5c>] (dump_stack+0x18/0x1c) r6:000000ff r5:80412388 r4:80685dc0 r3:80696cc0 [<804d3a44>] (dump_stack+0x0/0x1c) from [<80021868>] (warn_slowpath_common+0x54/0x6c) [<80021814>] (warn_slowpath_common+0x0/0x6c) from [<80021924>] (warn_slowpath_fmt+0x38/0x40) ... Setting SDIS (Stream Disable Mode- bit 4 of USBMODE register) fixes the problem. However, in current code CI13XXX_DISABLE_STREAMING flag is only set in udc mode, so allow disabling streaming also in host mode. Tested on a mx6qsabrelite board. Suggested-by: Peter Chen Signed-off-by: Fabio Estevam Reviewed-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/host.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index caecad9213f5..8e9d31277c43 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -70,6 +70,9 @@ static int host_start(struct ci13xxx *ci) else ci->hcd = hcd; + if (ci->platdata->flags & CI13XXX_DISABLE_STREAMING) + hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS); + return ret; } From f66dea709cd9309b2ee9f715697818001fb518de Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 4 Dec 2012 14:24:30 +0100 Subject: [PATCH 299/553] USB: ehci-fsl: fix regression on mpc5121e mpc5121e doesn't have system interface registers, accessing this register address space cause the machine check exception and a kernel crash: ... Machine check in kernel mode. Caused by (from SRR1=49030): Transfer error ack signal Oops: Machine check, sig: 7 [#1] MPC5121 ADS Modules linked in: NIP: c025fd60 LR: c0265bb4 CTR: 00000000 REGS: df82dac0 TRAP: 0200 Not tainted (3.7.0-rc7-00641-g81e6c91) MSR: 00049030 CR: 42002024 XER: 20000000 TASK = df824b70[1] 'swapper' THREAD: df82c000 GPR00: 00000000 df82db70 df824b70 df3ed0f0 00000003 00000000 00000000 00000000 GPR08: 00000020 32000000 c03550ec 20000000 22002028 00000000 c0003f5c 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0423898 c0450000 GPR24: 00000077 00000002 e5086180 1c000c00 e5086000 df33ec00 00000003 df34e000 NIP [c025fd60] ehci_fsl_setup_phy+0xd0/0x354 LR [c0265bb4] ehci_fsl_setup+0x220/0x284 ... Fix it by checking 'have_sysif_regs' flag before register access. Signed-off-by: Anatolij Gustschin Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-fsl.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index fd9b5424b860..d81d2fcbff18 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -230,7 +230,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, switch (phy_mode) { case FSL_USB2_PHY_ULPI: - if (pdata->controller_ver) { + if (pdata->have_sysif_regs && pdata->controller_ver) { /* controller version 1.6 or above */ setbits32(non_ehci + FSL_SOC_USB_CTRL, ULPI_PHY_CLK_SEL); @@ -251,7 +251,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, portsc |= PORT_PTS_PTW; /* fall through */ case FSL_USB2_PHY_UTMI: - if (pdata->controller_ver) { + if (pdata->have_sysif_regs && pdata->controller_ver) { /* controller version 1.6 or above */ setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to @@ -267,7 +267,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, break; } - if (pdata->controller_ver && (phy_mode == FSL_USB2_PHY_ULPI)) { + if (pdata->have_sysif_regs && pdata->controller_ver && + (phy_mode == FSL_USB2_PHY_ULPI)) { /* check PHY_CLK_VALID to get phy clk valid */ if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) { @@ -278,7 +279,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); - if (phy_mode != FSL_USB2_PHY_ULPI) + if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs) setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN); return 0; From bc009eca8d539162f7271c2daf0ab5e9e3bb90a0 Mon Sep 17 00:00:00 2001 From: Andreas Fleig Date: Wed, 5 Dec 2012 16:17:49 +0100 Subject: [PATCH 300/553] USB: Add device quirk for Microsoft VX700 webcam Add device quirk for Microsoft Lifecam VX700 v2.0 webcams. Fixes squeaking noise of the microphone. Signed-off-by: Andreas Fleig Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index fdefd9c7f7af..3113c1d71442 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -43,6 +43,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Creative SB Audigy 2 NX */ { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Microsoft LifeCam-VX700 v2.0 */ + { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Quickcam Fusion */ { USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME }, From 8e8de5ab37c877e8a40a864de05a18a00b4e74b7 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 10 Jan 2013 14:32:39 +0200 Subject: [PATCH 301/553] usb: host: ohci-tmio: fix compile warning Fix the following compile warning: In file included from drivers/usb/host/ohci-hcd.c:1170:0: drivers/usb/host/ohci-tmio.c: In function 'tmio_start_hc': drivers/usb/host/ohci-tmio.c:130:2: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'resource_size_t' [-Wformat] seen on ARM 32-bit builds. Signed-off-by: Felipe Balbi Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-tmio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c index d370245a4ee2..5e3a6deb62b1 100644 --- a/drivers/usb/host/ohci-tmio.c +++ b/drivers/usb/host/ohci-tmio.c @@ -128,7 +128,8 @@ static void tmio_start_hc(struct platform_device *dev) tmio_iowrite8(2, tmio->ccr + CCR_INTC); dev_info(&dev->dev, "revision %d @ 0x%08llx, irq %d\n", - tmio_ioread8(tmio->ccr + CCR_REVID), hcd->rsrc_start, hcd->irq); + tmio_ioread8(tmio->ccr + CCR_REVID), + (u64) hcd->rsrc_start, hcd->irq); } static int ohci_tmio_start(struct usb_hcd *hcd) From 0d21b0e3477395e7ff2acc269f15df6e6a8d356d Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sat, 12 Jan 2013 11:38:44 +1030 Subject: [PATCH 302/553] module: add new state MODULE_STATE_UNFORMED. You should never look at such a module, so it's excised from all paths which traverse the modules list. We add the state at the end, to avoid gratuitous ABI break (ksplice). Signed-off-by: Rusty Russell --- include/linux/module.h | 10 +++---- kernel/debug/kdb/kdb_main.c | 2 ++ kernel/module.c | 57 +++++++++++++++++++++++++++++++++---- 3 files changed, 59 insertions(+), 10 deletions(-) diff --git a/include/linux/module.h b/include/linux/module.h index 7760c6d344a3..1375ee3f03aa 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -199,11 +199,11 @@ struct module_use { struct module *source, *target; }; -enum module_state -{ - MODULE_STATE_LIVE, - MODULE_STATE_COMING, - MODULE_STATE_GOING, +enum module_state { + MODULE_STATE_LIVE, /* Normal state. */ + MODULE_STATE_COMING, /* Full formed, running module_init. */ + MODULE_STATE_GOING, /* Going away. */ + MODULE_STATE_UNFORMED, /* Still setting it up. */ }; /** diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c index 4d5f8d5612f3..8875254120b6 100644 --- a/kernel/debug/kdb/kdb_main.c +++ b/kernel/debug/kdb/kdb_main.c @@ -1970,6 +1970,8 @@ static int kdb_lsmod(int argc, const char **argv) kdb_printf("Module Size modstruct Used by\n"); list_for_each_entry(mod, kdb_modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; kdb_printf("%-20s%8u 0x%p ", mod->name, mod->core_size, (void *)mod); diff --git a/kernel/module.c b/kernel/module.c index 41bc1189b061..c3a2ee8e3679 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -188,6 +188,7 @@ struct load_info { ongoing or failed initialization etc. */ static inline int strong_try_module_get(struct module *mod) { + BUG_ON(mod && mod->state == MODULE_STATE_UNFORMED); if (mod && mod->state == MODULE_STATE_COMING) return -EBUSY; if (try_module_get(mod)) @@ -343,6 +344,9 @@ bool each_symbol_section(bool (*fn)(const struct symsearch *arr, #endif }; + if (mod->state == MODULE_STATE_UNFORMED) + continue; + if (each_symbol_in_section(arr, ARRAY_SIZE(arr), mod, fn, data)) return true; } @@ -450,16 +454,24 @@ const struct kernel_symbol *find_symbol(const char *name, EXPORT_SYMBOL_GPL(find_symbol); /* Search for module by name: must hold module_mutex. */ -struct module *find_module(const char *name) +static struct module *find_module_all(const char *name, + bool even_unformed) { struct module *mod; list_for_each_entry(mod, &modules, list) { + if (!even_unformed && mod->state == MODULE_STATE_UNFORMED) + continue; if (strcmp(mod->name, name) == 0) return mod; } return NULL; } + +struct module *find_module(const char *name) +{ + return find_module_all(name, false); +} EXPORT_SYMBOL_GPL(find_module); #ifdef CONFIG_SMP @@ -525,6 +537,8 @@ bool is_module_percpu_address(unsigned long addr) preempt_disable(); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if (!mod->percpu_size) continue; for_each_possible_cpu(cpu) { @@ -1048,6 +1062,8 @@ static ssize_t show_initstate(struct module_attribute *mattr, case MODULE_STATE_GOING: state = "going"; break; + default: + BUG(); } return sprintf(buffer, "%s\n", state); } @@ -1786,6 +1802,8 @@ void set_all_modules_text_rw(void) mutex_lock(&module_mutex); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if ((mod->module_core) && (mod->core_text_size)) { set_page_attributes(mod->module_core, mod->module_core + mod->core_text_size, @@ -1807,6 +1825,8 @@ void set_all_modules_text_ro(void) mutex_lock(&module_mutex); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if ((mod->module_core) && (mod->core_text_size)) { set_page_attributes(mod->module_core, mod->module_core + mod->core_text_size, @@ -2998,7 +3018,8 @@ static bool finished_loading(const char *name) mutex_lock(&module_mutex); mod = find_module(name); - ret = !mod || mod->state != MODULE_STATE_COMING; + ret = !mod || mod->state == MODULE_STATE_LIVE + || mod->state == MODULE_STATE_GOING; mutex_unlock(&module_mutex); return ret; @@ -3361,6 +3382,8 @@ const char *module_address_lookup(unsigned long addr, preempt_disable(); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if (within_module_init(addr, mod) || within_module_core(addr, mod)) { if (modname) @@ -3384,6 +3407,8 @@ int lookup_module_symbol_name(unsigned long addr, char *symname) preempt_disable(); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if (within_module_init(addr, mod) || within_module_core(addr, mod)) { const char *sym; @@ -3408,6 +3433,8 @@ int lookup_module_symbol_attrs(unsigned long addr, unsigned long *size, preempt_disable(); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if (within_module_init(addr, mod) || within_module_core(addr, mod)) { const char *sym; @@ -3435,6 +3462,8 @@ int module_get_kallsym(unsigned int symnum, unsigned long *value, char *type, preempt_disable(); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if (symnum < mod->num_symtab) { *value = mod->symtab[symnum].st_value; *type = mod->symtab[symnum].st_info; @@ -3477,9 +3506,12 @@ unsigned long module_kallsyms_lookup_name(const char *name) ret = mod_find_symname(mod, colon+1); *colon = ':'; } else { - list_for_each_entry_rcu(mod, &modules, list) + list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if ((ret = mod_find_symname(mod, name)) != 0) break; + } } preempt_enable(); return ret; @@ -3494,6 +3526,8 @@ int module_kallsyms_on_each_symbol(int (*fn)(void *, const char *, int ret; list_for_each_entry(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; for (i = 0; i < mod->num_symtab; i++) { ret = fn(data, mod->strtab + mod->symtab[i].st_name, mod, mod->symtab[i].st_value); @@ -3509,6 +3543,7 @@ static char *module_flags(struct module *mod, char *buf) { int bx = 0; + BUG_ON(mod->state == MODULE_STATE_UNFORMED); if (mod->taints || mod->state == MODULE_STATE_GOING || mod->state == MODULE_STATE_COMING) { @@ -3550,6 +3585,10 @@ static int m_show(struct seq_file *m, void *p) struct module *mod = list_entry(p, struct module, list); char buf[8]; + /* We always ignore unformed modules. */ + if (mod->state == MODULE_STATE_UNFORMED) + return 0; + seq_printf(m, "%s %u", mod->name, mod->init_size + mod->core_size); print_unload_info(m, mod); @@ -3610,6 +3649,8 @@ const struct exception_table_entry *search_module_extables(unsigned long addr) preempt_disable(); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if (mod->num_exentries == 0) continue; @@ -3658,10 +3699,13 @@ struct module *__module_address(unsigned long addr) if (addr < module_addr_min || addr > module_addr_max) return NULL; - list_for_each_entry_rcu(mod, &modules, list) + list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if (within_module_core(addr, mod) || within_module_init(addr, mod)) return mod; + } return NULL; } EXPORT_SYMBOL_GPL(__module_address); @@ -3714,8 +3758,11 @@ void print_modules(void) printk(KERN_DEFAULT "Modules linked in:"); /* Most callers should already have preempt disabled, but make sure */ preempt_disable(); - list_for_each_entry_rcu(mod, &modules, list) + list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; printk(" %s%s", mod->name, module_flags(mod, buf)); + } preempt_enable(); if (last_unloaded_module[0]) printk(" [last unloaded: %s]", last_unloaded_module); From 1fb9341ac34825aa40354e74d9a2c69df7d2c304 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sat, 12 Jan 2013 13:27:34 +1030 Subject: [PATCH 303/553] module: put modules in list much earlier. Prarit's excellent bug report: > In recent Fedora releases (F17 & F18) some users have reported seeing > messages similar to > > [ 15.478160] kvm: Could not allocate 304 bytes percpu data > [ 15.478174] PERCPU: allocation failed, size=304 align=32, alloc from > reserved chunk failed > > during system boot. In some cases, users have also reported seeing this > message along with a failed load of other modules. > > What is happening is systemd is loading an instance of the kvm module for > each cpu found (see commit e9bda3b). When the module load occurs the kernel > currently allocates the modules percpu data area prior to checking to see > if the module is already loaded or is in the process of being loaded. If > the module is already loaded, or finishes load, the module loading code > releases the current instance's module's percpu data. Now we have a new state MODULE_STATE_UNFORMED, we can insert the module into the list (and thus guarantee its uniqueness) before we allocate the per-cpu region. Reported-by: Prarit Bhargava Signed-off-by: Rusty Russell Tested-by: Prarit Bhargava --- kernel/module.c | 90 +++++++++++++++++++++++++++---------------------- lib/bug.c | 1 + 2 files changed, 50 insertions(+), 41 deletions(-) diff --git a/kernel/module.c b/kernel/module.c index c3a2ee8e3679..ec535aa63c98 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -3017,7 +3017,7 @@ static bool finished_loading(const char *name) bool ret; mutex_lock(&module_mutex); - mod = find_module(name); + mod = find_module_all(name, true); ret = !mod || mod->state == MODULE_STATE_LIVE || mod->state == MODULE_STATE_GOING; mutex_unlock(&module_mutex); @@ -3141,6 +3141,32 @@ static int load_module(struct load_info *info, const char __user *uargs, goto free_copy; } + /* + * We try to place it in the list now to make sure it's unique + * before we dedicate too many resources. In particular, + * temporary percpu memory exhaustion. + */ + mod->state = MODULE_STATE_UNFORMED; +again: + mutex_lock(&module_mutex); + if ((old = find_module_all(mod->name, true)) != NULL) { + if (old->state == MODULE_STATE_COMING + || old->state == MODULE_STATE_UNFORMED) { + /* Wait in case it fails to load. */ + mutex_unlock(&module_mutex); + err = wait_event_interruptible(module_wq, + finished_loading(mod->name)); + if (err) + goto free_module; + goto again; + } + err = -EEXIST; + mutex_unlock(&module_mutex); + goto free_module; + } + list_add_rcu(&mod->list, &modules); + mutex_unlock(&module_mutex); + #ifdef CONFIG_MODULE_SIG mod->sig_ok = info->sig_ok; if (!mod->sig_ok) @@ -3150,7 +3176,7 @@ static int load_module(struct load_info *info, const char __user *uargs, /* Now module is in final location, initialize linked lists, etc. */ err = module_unload_init(mod); if (err) - goto free_module; + goto unlink_mod; /* Now we've got everything in the final locations, we can * find optional sections. */ @@ -3185,54 +3211,33 @@ static int load_module(struct load_info *info, const char __user *uargs, goto free_arch_cleanup; } - /* Mark state as coming so strong_try_module_get() ignores us. */ - mod->state = MODULE_STATE_COMING; - - /* Now sew it into the lists so we can get lockdep and oops - * info during argument parsing. No one should access us, since - * strong_try_module_get() will fail. - * lockdep/oops can run asynchronous, so use the RCU list insertion - * function to insert in a way safe to concurrent readers. - * The mutex protects against concurrent writers. - */ -again: - mutex_lock(&module_mutex); - if ((old = find_module(mod->name)) != NULL) { - if (old->state == MODULE_STATE_COMING) { - /* Wait in case it fails to load. */ - mutex_unlock(&module_mutex); - err = wait_event_interruptible(module_wq, - finished_loading(mod->name)); - if (err) - goto free_arch_cleanup; - goto again; - } - err = -EEXIST; - goto unlock; - } - - /* This has to be done once we're sure module name is unique. */ dynamic_debug_setup(info->debug, info->num_debug); - /* Find duplicate symbols */ + mutex_lock(&module_mutex); + /* Find duplicate symbols (must be called under lock). */ err = verify_export_symbols(mod); if (err < 0) - goto ddebug; + goto ddebug_cleanup; + /* This relies on module_mutex for list integrity. */ module_bug_finalize(info->hdr, info->sechdrs, mod); - list_add_rcu(&mod->list, &modules); + + /* Mark state as coming so strong_try_module_get() ignores us, + * but kallsyms etc. can see us. */ + mod->state = MODULE_STATE_COMING; + mutex_unlock(&module_mutex); /* Module is ready to execute: parsing args may do that. */ err = parse_args(mod->name, mod->args, mod->kp, mod->num_kp, -32768, 32767, &ddebug_dyndbg_module_param_cb); if (err < 0) - goto unlink; + goto bug_cleanup; /* Link in to syfs. */ err = mod_sysfs_setup(mod, info, mod->kp, mod->num_kp); if (err < 0) - goto unlink; + goto bug_cleanup; /* Get rid of temporary copy. */ free_copy(info); @@ -3242,16 +3247,13 @@ again: return do_init_module(mod); - unlink: + bug_cleanup: + /* module_bug_cleanup needs module_mutex protection */ mutex_lock(&module_mutex); - /* Unlink carefully: kallsyms could be walking list. */ - list_del_rcu(&mod->list); module_bug_cleanup(mod); - wake_up_all(&module_wq); - ddebug: - dynamic_debug_remove(info->debug); - unlock: mutex_unlock(&module_mutex); + ddebug_cleanup: + dynamic_debug_remove(info->debug); synchronize_sched(); kfree(mod->args); free_arch_cleanup: @@ -3260,6 +3262,12 @@ again: free_modinfo(mod); free_unload: module_unload_free(mod); + unlink_mod: + mutex_lock(&module_mutex); + /* Unlink carefully: kallsyms could be walking list. */ + list_del_rcu(&mod->list); + wake_up_all(&module_wq); + mutex_unlock(&module_mutex); free_module: module_deallocate(mod, info); free_copy: diff --git a/lib/bug.c b/lib/bug.c index a28c1415357c..d0cdf14c651a 100644 --- a/lib/bug.c +++ b/lib/bug.c @@ -55,6 +55,7 @@ static inline unsigned long bug_addr(const struct bug_entry *bug) } #ifdef CONFIG_MODULES +/* Updates are protected by module mutex */ static LIST_HEAD(module_bug_list); static const struct bug_entry *module_find_bug(unsigned long bugaddr) From b8deabd3eebaa96cf8d6e290d67b03f36c7f7a41 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Fri, 11 Jan 2013 16:59:32 +0000 Subject: [PATCH 304/553] tuntap: switch to use rtnl_dereference() Switch to use rtnl_dereference() instead of the open code, suggested by Eric. Cc: Eric Dumazet Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/tun.c | 27 ++++++++++----------------- 1 file changed, 10 insertions(+), 17 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 99b58d862174..aa963c44450a 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -404,8 +404,8 @@ static void __tun_detach(struct tun_file *tfile, bool clean) struct tun_struct *tun; struct net_device *dev; - tun = rcu_dereference_protected(tfile->tun, - lockdep_rtnl_is_held()); + tun = rtnl_dereference(tfile->tun); + if (tun) { u16 index = tfile->queue_index; BUG_ON(index >= tun->numqueues); @@ -414,8 +414,7 @@ static void __tun_detach(struct tun_file *tfile, bool clean) rcu_assign_pointer(tun->tfiles[index], tun->tfiles[tun->numqueues - 1]); rcu_assign_pointer(tfile->tun, NULL); - ntfile = rcu_dereference_protected(tun->tfiles[index], - lockdep_rtnl_is_held()); + ntfile = rtnl_dereference(tun->tfiles[index]); ntfile->queue_index = index; --tun->numqueues; @@ -458,8 +457,7 @@ static void tun_detach_all(struct net_device *dev) int i, n = tun->numqueues; for (i = 0; i < n; i++) { - tfile = rcu_dereference_protected(tun->tfiles[i], - lockdep_rtnl_is_held()); + tfile = rtnl_dereference(tun->tfiles[i]); BUG_ON(!tfile); wake_up_all(&tfile->wq.wait); rcu_assign_pointer(tfile->tun, NULL); @@ -469,8 +467,7 @@ static void tun_detach_all(struct net_device *dev) synchronize_net(); for (i = 0; i < n; i++) { - tfile = rcu_dereference_protected(tun->tfiles[i], - lockdep_rtnl_is_held()); + tfile = rtnl_dereference(tun->tfiles[i]); /* Drop read queue */ skb_queue_purge(&tfile->sk.sk_receive_queue); sock_put(&tfile->sk); @@ -489,7 +486,7 @@ static int tun_attach(struct tun_struct *tun, struct file *file) int err; err = -EINVAL; - if (rcu_dereference_protected(tfile->tun, lockdep_rtnl_is_held())) + if (rtnl_dereference(tfile->tun)) goto out; if (tfile->detached && tun != tfile->detached) goto out; @@ -1740,8 +1737,7 @@ static void tun_detach_filter(struct tun_struct *tun, int n) struct tun_file *tfile; for (i = 0; i < n; i++) { - tfile = rcu_dereference_protected(tun->tfiles[i], - lockdep_rtnl_is_held()); + tfile = rtnl_dereference(tun->tfiles[i]); sk_detach_filter(tfile->socket.sk); } @@ -1754,8 +1750,7 @@ static int tun_attach_filter(struct tun_struct *tun) struct tun_file *tfile; for (i = 0; i < tun->numqueues; i++) { - tfile = rcu_dereference_protected(tun->tfiles[i], - lockdep_rtnl_is_held()); + tfile = rtnl_dereference(tun->tfiles[i]); ret = sk_attach_filter(&tun->fprog, tfile->socket.sk); if (ret) { tun_detach_filter(tun, i); @@ -1773,8 +1768,7 @@ static void tun_set_sndbuf(struct tun_struct *tun) int i; for (i = 0; i < tun->numqueues; i++) { - tfile = rcu_dereference_protected(tun->tfiles[i], - lockdep_rtnl_is_held()); + tfile = rtnl_dereference(tun->tfiles[i]); tfile->socket.sk->sk_sndbuf = tun->sndbuf; } } @@ -1794,8 +1788,7 @@ static int tun_set_queue(struct file *file, struct ifreq *ifr) else ret = tun_attach(tun, file); } else if (ifr->ifr_flags & IFF_DETACH_QUEUE) { - tun = rcu_dereference_protected(tfile->tun, - lockdep_rtnl_is_held()); + tun = rtnl_dereference(tfile->tun); if (!tun || !(tun->flags & TUN_TAP_MQ)) ret = -EINVAL; else From 7c0c3b1a8a175437991ccc898ed66ec5e4a96208 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Fri, 11 Jan 2013 16:59:33 +0000 Subject: [PATCH 305/553] tuntap: forbid calling TUNSETIFF when detached Michael points out that even after Stefan's fix the TUNSETIFF is still allowed to create a new tap device. This because we only check tfile->tun but the tfile->detached were introduced. Fix this by failing early in tun_set_iff() if the file is detached. After this fix, there's no need to do the check again in tun_set_iff(), so this patch removes it. Cc: Michael S. Tsirkin Cc: Stefan Hajnoczi Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/tun.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index aa963c44450a..a36b56f0940b 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -488,8 +488,6 @@ static int tun_attach(struct tun_struct *tun, struct file *file) err = -EINVAL; if (rtnl_dereference(tfile->tun)) goto out; - if (tfile->detached && tun != tfile->detached) - goto out; err = -EBUSY; if (!(tun->flags & TUN_TAP_MQ) && tun->numqueues == 1) @@ -1543,6 +1541,9 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) struct net_device *dev; int err; + if (tfile->detached) + return -EINVAL; + dev = __dev_get_by_name(net, ifr->ifr_name); if (dev) { if (ifr->ifr_flags & IFF_TUN_EXCL) From dd38bd853082355641d0034aaf368e13ef2438f8 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Fri, 11 Jan 2013 16:59:34 +0000 Subject: [PATCH 306/553] tuntap: fix leaking reference count Reference count leaking of both module and sock were found: - When a detached file were closed, its sock refcnt from device were not released, solving this by add the sock_put(). - The module were hold or drop unconditionally in TUNSETPERSIST, which means we if we set the persist flag for N times, we need unset it for another N times. Solving this by only hold or drop an reference when there's a flag change and also drop the reference count when the persist device is deleted. Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/tun.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index a36b56f0940b..af372d0957fe 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -428,8 +428,10 @@ static void __tun_detach(struct tun_file *tfile, bool clean) /* Drop read queue */ skb_queue_purge(&tfile->sk.sk_receive_queue); tun_set_real_num_queues(tun); - } else if (tfile->detached && clean) + } else if (tfile->detached && clean) { tun = tun_enable_queue(tfile); + sock_put(&tfile->sk); + } if (clean) { if (tun && tun->numqueues == 0 && tun->numdisabled == 0 && @@ -478,6 +480,9 @@ static void tun_detach_all(struct net_device *dev) sock_put(&tfile->sk); } BUG_ON(tun->numdisabled != 0); + + if (tun->flags & TUN_PERSIST) + module_put(THIS_MODULE); } static int tun_attach(struct tun_struct *tun, struct file *file) @@ -1874,10 +1879,11 @@ static long __tun_chr_ioctl(struct file *file, unsigned int cmd, /* Disable/Enable persist mode. Keep an extra reference to the * module to prevent the module being unprobed. */ - if (arg) { + if (arg && !(tun->flags & TUN_PERSIST)) { tun->flags |= TUN_PERSIST; __module_get(THIS_MODULE); - } else { + } + if (!arg && (tun->flags & TUN_PERSIST)) { tun->flags &= ~TUN_PERSIST; module_put(THIS_MODULE); } From a412a11d6a24aebb6a898ed5d4e1c0725b638da3 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 12 Jan 2013 14:00:06 +0100 Subject: [PATCH 307/553] ACPI / glue: Fix build with ACPI_GLUE_DEBUG set If ACPI_GLUE_DEBUG is different from 0 (setting this requires a manual change of glue.c), build breaks because of a leftover reference to dev->acpi_handle in acpi_platform_notify(). Fix this by using ACPI_HANDLE(dev) instead as appropriate. [rjw: Subject and changelog] Signed-off-by: Yinghai Lu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/glue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 95af6f674a6c..35da18113216 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -297,7 +297,7 @@ static int acpi_platform_notify(struct device *dev) if (!ret) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - acpi_get_name(dev->acpi_handle, ACPI_FULL_PATHNAME, &buffer); + acpi_get_name(ACPI_HANDLE(dev), ACPI_FULL_PATHNAME, &buffer); DBG("Device %s -> %s\n", dev_name(dev), (char *)buffer.pointer); kfree(buffer.pointer); } else From 171c4006fb1b42a084057a71c86776e9f1b8e62c Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Wed, 9 Jan 2013 18:49:51 +0100 Subject: [PATCH 308/553] s390/mm: fix pmd_pfn() for thp The pfn calculation in pmd_pfn() is broken for thp, because it uses HPAGE_SHIFT instead of the normal PAGE_SHIFT. This is fixed by removing the distinction between thp and normal pmds in that function, and always using PAGE_SHIFT. Reported-by: Christian Borntraeger Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/pgtable.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index c928dc1938f2..c1d7930a82f4 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -1387,10 +1387,7 @@ static inline int has_transparent_hugepage(void) static inline unsigned long pmd_pfn(pmd_t pmd) { - if (pmd_trans_huge(pmd)) - return pmd_val(pmd) >> HPAGE_SHIFT; - else - return pmd_val(pmd) >> PAGE_SHIFT; + return pmd_val(pmd) >> PAGE_SHIFT; } #endif /* CONFIG_TRANSPARENT_HUGEPAGE */ From 7bdc229fad1d42beda70f1966042262470660082 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 11 Jan 2013 15:26:01 +0100 Subject: [PATCH 309/553] s390: use -fPIC for module compile The xfs module uses a lot of tracepoint, with TRACEPOINTS=y and a few debugging options the GOT table of the xfs module will get bigger than 4K. To get a working xfs module it needs to be compiled with -fPIC instead of -fpic. To play safe use -fPIC for all modules. Signed-off-by: Martin Schwidefsky --- arch/s390/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 4b8e08b56f49..7e3ce78d4290 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -24,8 +24,8 @@ CHECKFLAGS += -D__s390__ -msize-long else LD_BFD := elf64-s390 LDFLAGS := -m elf64_s390 -KBUILD_AFLAGS_MODULE += -fpic -D__PIC__ -KBUILD_CFLAGS_MODULE += -fpic -D__PIC__ +KBUILD_AFLAGS_MODULE += -fPIC +KBUILD_CFLAGS_MODULE += -fPIC KBUILD_CFLAGS += -m64 KBUILD_AFLAGS += -m64 UTS_MACHINE := s390x From c2be6f93b383c873a4f9d521afa49b1b67d06085 Mon Sep 17 00:00:00 2001 From: Yijing Wang Date: Fri, 11 Jan 2013 10:15:54 +0800 Subject: [PATCH 310/553] PCI: pciehp: Use per-slot workqueues to avoid deadlock When we have a hotplug-capable PCIe port with a second hotplug-capable PCIe port below it, removing the device below the upstream port causes a deadlock. The deadlock happens because we use the pciehp_wq workqueue to run pciehp_power_thread(), which uses pciehp_disable_slot() to remove devices below the upstream port. When we remove the downstream PCIe port, we call pciehp_remove(), the pciehp driver's .remove() method. That calls flush_workqueue(pciehp_wq), which deadlocks because the pciehp_power_thread() work item is still running. This patch avoids the deadlock by creating a workqueue for every PCIe port and removing the single shared workqueue. Here's the call path that leads to the deadlock: pciehp_queue_pushbutton_work queue_work(pciehp_wq) # queue pciehp_power_thread ... pciehp_power_thread pciehp_disable_slot remove_board pciehp_unconfigure_device pci_stop_and_remove_bus_device ... pciehp_remove # pciehp driver .remove method pciehp_release_ctrl pcie_cleanup_slot flush_workqueue(pciehp_wq) This is fairly urgent because it can be caused by simply unplugging a Thunderbolt adapter, as reported by Daniel below. [bhelgaas: changelog] Reference: http://lkml.kernel.org/r/CAMVG2ssiRgcTD1bej2tkUUfsWmpL5eNtPcNif9va2-Gzb2u8nQ@mail.gmail.com Reported-and-tested-by: Daniel J Blueman Reviewed-by: Kenji Kaneshige Signed-off-by: Yijing Wang Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org --- drivers/pci/hotplug/pciehp.h | 2 +- drivers/pci/hotplug/pciehp_core.c | 11 ++--------- drivers/pci/hotplug/pciehp_ctrl.c | 8 ++++---- drivers/pci/hotplug/pciehp_hpc.c | 11 ++++++++++- 4 files changed, 17 insertions(+), 15 deletions(-) diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 26ffd3e3fb74..2c113de94323 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -44,7 +44,6 @@ extern bool pciehp_poll_mode; extern int pciehp_poll_time; extern bool pciehp_debug; extern bool pciehp_force; -extern struct workqueue_struct *pciehp_wq; #define dbg(format, arg...) \ do { \ @@ -78,6 +77,7 @@ struct slot { struct hotplug_slot *hotplug_slot; struct delayed_work work; /* work for button event */ struct mutex lock; + struct workqueue_struct *wq; }; struct event_info { diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 916bf4f53aba..939bd1d4b5b1 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -42,7 +42,6 @@ bool pciehp_debug; bool pciehp_poll_mode; int pciehp_poll_time; bool pciehp_force; -struct workqueue_struct *pciehp_wq; #define DRIVER_VERSION "0.4" #define DRIVER_AUTHOR "Dan Zink , Greg Kroah-Hartman , Dely Sy " @@ -340,18 +339,13 @@ static int __init pcied_init(void) { int retval = 0; - pciehp_wq = alloc_workqueue("pciehp", 0, 0); - if (!pciehp_wq) - return -ENOMEM; - pciehp_firmware_init(); retval = pcie_port_service_register(&hpdriver_portdrv); dbg("pcie_port_service_register = %d\n", retval); info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); - if (retval) { - destroy_workqueue(pciehp_wq); + if (retval) dbg("Failure to register service\n"); - } + return retval; } @@ -359,7 +353,6 @@ static void __exit pcied_cleanup(void) { dbg("unload_pciehpd()\n"); pcie_port_service_unregister(&hpdriver_portdrv); - destroy_workqueue(pciehp_wq); info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n"); } diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 27f44295a657..38f018679175 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -49,7 +49,7 @@ static int queue_interrupt_event(struct slot *p_slot, u32 event_type) info->p_slot = p_slot; INIT_WORK(&info->work, interrupt_event_handler); - queue_work(pciehp_wq, &info->work); + queue_work(p_slot->wq, &info->work); return 0; } @@ -344,7 +344,7 @@ void pciehp_queue_pushbutton_work(struct work_struct *work) kfree(info); goto out; } - queue_work(pciehp_wq, &info->work); + queue_work(p_slot->wq, &info->work); out: mutex_unlock(&p_slot->lock); } @@ -377,7 +377,7 @@ static void handle_button_press_event(struct slot *p_slot) if (ATTN_LED(ctrl)) pciehp_set_attention_status(p_slot, 0); - queue_delayed_work(pciehp_wq, &p_slot->work, 5*HZ); + queue_delayed_work(p_slot->wq, &p_slot->work, 5*HZ); break; case BLINKINGOFF_STATE: case BLINKINGON_STATE: @@ -439,7 +439,7 @@ static void handle_surprise_event(struct slot *p_slot) else p_slot->state = POWERON_STATE; - queue_work(pciehp_wq, &info->work); + queue_work(p_slot->wq, &info->work); } static void interrupt_event_handler(struct work_struct *work) diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 13b2eaf7ba43..5127f3f41821 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -773,23 +773,32 @@ static void pcie_shutdown_notification(struct controller *ctrl) static int pcie_init_slot(struct controller *ctrl) { struct slot *slot; + char name[32]; slot = kzalloc(sizeof(*slot), GFP_KERNEL); if (!slot) return -ENOMEM; + snprintf(name, sizeof(name), "pciehp-%u", PSN(ctrl)); + slot->wq = alloc_workqueue(name, 0, 0); + if (!slot->wq) + goto abort; + slot->ctrl = ctrl; mutex_init(&slot->lock); INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work); ctrl->slot = slot; return 0; +abort: + kfree(slot); + return -ENOMEM; } static void pcie_cleanup_slot(struct controller *ctrl) { struct slot *slot = ctrl->slot; cancel_delayed_work(&slot->work); - flush_workqueue(pciehp_wq); + destroy_workqueue(slot->wq); kfree(slot); } From b7c13f76fda994284521f6ef996119c25282bdeb Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Tue, 1 Jan 2013 16:02:33 +0100 Subject: [PATCH 311/553] sparc: remove __devinit, __devexit annotations __devinit, __devexit annotations are nops - so drop them. Likewise for __devexit_p. Adjusted alignment of arguments when needed. Signed-off-by: Sam Ravnborg Signed-off-by: David S. Miller --- arch/sparc/include/asm/parport.h | 6 ++--- arch/sparc/include/asm/timer_64.h | 2 +- arch/sparc/kernel/apc.c | 4 ++-- arch/sparc/kernel/auxio_64.c | 2 +- arch/sparc/kernel/central.c | 6 ++--- arch/sparc/kernel/chmc.c | 34 +++++++++++++------------- arch/sparc/kernel/ds.c | 5 ++-- arch/sparc/kernel/ldc.c | 2 +- arch/sparc/kernel/leon_pci.c | 2 +- arch/sparc/kernel/leon_pci_grpci2.c | 2 +- arch/sparc/kernel/pci.c | 37 ++++++++++++++--------------- arch/sparc/kernel/pci_fire.c | 6 ++--- arch/sparc/kernel/pci_psycho.c | 12 +++++----- arch/sparc/kernel/pci_sabre.c | 9 ++++--- arch/sparc/kernel/pci_schizo.c | 16 ++++++------- arch/sparc/kernel/pci_sun4v.c | 15 ++++++------ arch/sparc/kernel/pcic.c | 5 ++-- arch/sparc/kernel/pmc.c | 2 +- arch/sparc/kernel/power.c | 4 ++-- arch/sparc/kernel/smp_64.c | 4 ++-- arch/sparc/kernel/time_32.c | 2 +- arch/sparc/kernel/time_64.c | 10 ++++---- arch/sparc/mm/init_64.c | 6 ++--- 23 files changed, 93 insertions(+), 100 deletions(-) diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h index cb33608cc68f..c55291e5b83e 100644 --- a/arch/sparc/include/asm/parport.h +++ b/arch/sparc/include/asm/parport.h @@ -103,7 +103,7 @@ static inline unsigned int get_dma_residue(unsigned int dmanr) return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info); } -static int __devinit ecpp_probe(struct platform_device *op) +static int ecpp_probe(struct platform_device *op) { unsigned long base = op->resource[0].start; unsigned long config = op->resource[1].start; @@ -192,7 +192,7 @@ out_err: return err; } -static int __devexit ecpp_remove(struct platform_device *op) +static int ecpp_remove(struct platform_device *op) { struct parport *p = dev_get_drvdata(&op->dev); int slot = p->dma; @@ -242,7 +242,7 @@ static struct platform_driver ecpp_driver = { .of_match_table = ecpp_match, }, .probe = ecpp_probe, - .remove = __devexit_p(ecpp_remove), + .remove = ecpp_remove, }; static int parport_pc_find_nonpci_ports(int autoirq, int autodma) diff --git a/arch/sparc/include/asm/timer_64.h b/arch/sparc/include/asm/timer_64.h index ef3c3682debf..01197d8215c4 100644 --- a/arch/sparc/include/asm/timer_64.h +++ b/arch/sparc/include/asm/timer_64.h @@ -24,7 +24,7 @@ struct sparc64_tick_ops { extern struct sparc64_tick_ops *tick_ops; extern unsigned long sparc64_get_clock_tick(unsigned int cpu); -extern void __devinit setup_sparc64_timer(void); +extern void setup_sparc64_timer(void); extern void __init time_init(void); #endif /* _SPARC64_TIMER_H */ diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c index 812e10bbb0b3..348fa1aeabce 100644 --- a/arch/sparc/kernel/apc.c +++ b/arch/sparc/kernel/apc.c @@ -31,7 +31,7 @@ #define APC_DEVNAME "apc" static u8 __iomem *regs; -static int apc_no_idle __devinitdata = 0; +static int apc_no_idle = 0; #define apc_readb(offs) (sbus_readb(regs+offs)) #define apc_writeb(val, offs) (sbus_writeb(val, regs+offs)) @@ -138,7 +138,7 @@ static const struct file_operations apc_fops = { static struct miscdevice apc_miscdev = { APC_MINOR, APC_DEVNAME, &apc_fops }; -static int __devinit apc_probe(struct platform_device *op) +static int apc_probe(struct platform_device *op) { int err; diff --git a/arch/sparc/kernel/auxio_64.c b/arch/sparc/kernel/auxio_64.c index 773091ac71a3..86e55778e4af 100644 --- a/arch/sparc/kernel/auxio_64.c +++ b/arch/sparc/kernel/auxio_64.c @@ -102,7 +102,7 @@ static const struct of_device_id auxio_match[] = { MODULE_DEVICE_TABLE(of, auxio_match); -static int __devinit auxio_probe(struct platform_device *dev) +static int auxio_probe(struct platform_device *dev) { struct device_node *dp = dev->dev.of_node; unsigned long size; diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c index 9708851a8b9f..052b5a44318f 100644 --- a/arch/sparc/kernel/central.c +++ b/arch/sparc/kernel/central.c @@ -33,7 +33,7 @@ struct fhc { struct platform_device leds_pdev; }; -static int __devinit clock_board_calc_nslots(struct clock_board *p) +static int clock_board_calc_nslots(struct clock_board *p) { u8 reg = upa_readb(p->clock_regs + CLOCK_STAT1) & 0xc0; @@ -60,7 +60,7 @@ static int __devinit clock_board_calc_nslots(struct clock_board *p) } } -static int __devinit clock_board_probe(struct platform_device *op) +static int clock_board_probe(struct platform_device *op) { struct clock_board *p = kzalloc(sizeof(*p), GFP_KERNEL); int err = -ENOMEM; @@ -157,7 +157,7 @@ static struct platform_driver clock_board_driver = { }, }; -static int __devinit fhc_probe(struct platform_device *op) +static int fhc_probe(struct platform_device *op) { struct fhc *p = kzalloc(sizeof(*p), GFP_KERNEL); int err = -ENOMEM; diff --git a/arch/sparc/kernel/chmc.c b/arch/sparc/kernel/chmc.c index 5f450260981d..dbb210d74e21 100644 --- a/arch/sparc/kernel/chmc.c +++ b/arch/sparc/kernel/chmc.c @@ -336,9 +336,9 @@ static int jbusmc_print_dimm(int syndrome_code, return 0; } -static u64 __devinit jbusmc_dimm_group_size(u64 base, - const struct linux_prom64_registers *mem_regs, - int num_mem_regs) +static u64 jbusmc_dimm_group_size(u64 base, + const struct linux_prom64_registers *mem_regs, + int num_mem_regs) { u64 max = base + (8UL * 1024 * 1024 * 1024); u64 max_seen = base; @@ -363,10 +363,10 @@ static u64 __devinit jbusmc_dimm_group_size(u64 base, return max_seen - base; } -static void __devinit jbusmc_construct_one_dimm_group(struct jbusmc *p, - unsigned long index, - const struct linux_prom64_registers *mem_regs, - int num_mem_regs) +static void jbusmc_construct_one_dimm_group(struct jbusmc *p, + unsigned long index, + const struct linux_prom64_registers *mem_regs, + int num_mem_regs) { struct jbusmc_dimm_group *dp = &p->dimm_groups[index]; @@ -378,9 +378,9 @@ static void __devinit jbusmc_construct_one_dimm_group(struct jbusmc *p, dp->size = jbusmc_dimm_group_size(dp->base_addr, mem_regs, num_mem_regs); } -static void __devinit jbusmc_construct_dimm_groups(struct jbusmc *p, - const struct linux_prom64_registers *mem_regs, - int num_mem_regs) +static void jbusmc_construct_dimm_groups(struct jbusmc *p, + const struct linux_prom64_registers *mem_regs, + int num_mem_regs) { if (p->mc_reg_1 & JB_MC_REG1_DIMM1_BANK0) { jbusmc_construct_one_dimm_group(p, 0, mem_regs, num_mem_regs); @@ -392,7 +392,7 @@ static void __devinit jbusmc_construct_dimm_groups(struct jbusmc *p, } } -static int __devinit jbusmc_probe(struct platform_device *op) +static int jbusmc_probe(struct platform_device *op) { const struct linux_prom64_registers *mem_regs; struct device_node *mem_node; @@ -689,7 +689,7 @@ static void chmc_fetch_decode_regs(struct chmc *p) chmc_read_mcreg(p, CHMCTRL_DECODE4)); } -static int __devinit chmc_probe(struct platform_device *op) +static int chmc_probe(struct platform_device *op) { struct device_node *dp = op->dev.of_node; unsigned long ver; @@ -763,7 +763,7 @@ out_free: goto out; } -static int __devinit us3mc_probe(struct platform_device *op) +static int us3mc_probe(struct platform_device *op) { if (mc_type == MC_TYPE_SAFARI) return chmc_probe(op); @@ -772,21 +772,21 @@ static int __devinit us3mc_probe(struct platform_device *op) return -ENODEV; } -static void __devexit chmc_destroy(struct platform_device *op, struct chmc *p) +static void chmc_destroy(struct platform_device *op, struct chmc *p) { list_del(&p->list); of_iounmap(&op->resource[0], p->regs, 0x48); kfree(p); } -static void __devexit jbusmc_destroy(struct platform_device *op, struct jbusmc *p) +static void jbusmc_destroy(struct platform_device *op, struct jbusmc *p) { mc_list_del(&p->list); of_iounmap(&op->resource[0], p->regs, JBUSMC_REGS_SIZE); kfree(p); } -static int __devexit us3mc_remove(struct platform_device *op) +static int us3mc_remove(struct platform_device *op) { void *p = dev_get_drvdata(&op->dev); @@ -814,7 +814,7 @@ static struct platform_driver us3mc_driver = { .of_match_table = us3mc_match, }, .probe = us3mc_probe, - .remove = __devexit_p(us3mc_remove), + .remove = us3mc_remove, }; static inline bool us3mc_platform(void) diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c index f09257c86107..75bb608c423e 100644 --- a/arch/sparc/kernel/ds.c +++ b/arch/sparc/kernel/ds.c @@ -29,7 +29,7 @@ #define DRV_MODULE_VERSION "1.0" #define DRV_MODULE_RELDATE "Jul 11, 2007" -static char version[] __devinitdata = +static char version[] = DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; MODULE_AUTHOR("David S. Miller (davem@davemloft.net)"); MODULE_DESCRIPTION("Sun LDOM domain services driver"); @@ -1146,8 +1146,7 @@ static void ds_event(void *arg, int event) spin_unlock_irqrestore(&ds_lock, flags); } -static int __devinit ds_probe(struct vio_dev *vdev, - const struct vio_device_id *id) +static int ds_probe(struct vio_dev *vdev, const struct vio_device_id *id) { static int ds_version_printed; struct ldc_channel_config ds_cfg = { diff --git a/arch/sparc/kernel/ldc.c b/arch/sparc/kernel/ldc.c index 81d92fc9983b..9fcc6b4e93b3 100644 --- a/arch/sparc/kernel/ldc.c +++ b/arch/sparc/kernel/ldc.c @@ -27,7 +27,7 @@ #define DRV_MODULE_VERSION "1.1" #define DRV_MODULE_RELDATE "July 22, 2008" -static char version[] __devinitdata = +static char version[] = DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; #define LDC_PACKET_SIZE 64 diff --git a/arch/sparc/kernel/leon_pci.c b/arch/sparc/kernel/leon_pci.c index fc0521161568..852dc8430528 100644 --- a/arch/sparc/kernel/leon_pci.c +++ b/arch/sparc/kernel/leon_pci.c @@ -43,7 +43,7 @@ void leon_pci_init(struct platform_device *ofdev, struct leon_pci_info *info) } } -void __devinit pcibios_fixup_bus(struct pci_bus *pbus) +void pcibios_fixup_bus(struct pci_bus *pbus) { struct pci_dev *dev; int i, has_io, has_mem; diff --git a/arch/sparc/kernel/leon_pci_grpci2.c b/arch/sparc/kernel/leon_pci_grpci2.c index b1bc38853a3d..fc4320886a3a 100644 --- a/arch/sparc/kernel/leon_pci_grpci2.c +++ b/arch/sparc/kernel/leon_pci_grpci2.c @@ -668,7 +668,7 @@ static irqreturn_t grpci2_err_interrupt(int irq, void *arg) return IRQ_HANDLED; } -static int __devinit grpci2_of_probe(struct platform_device *ofdev) +static int grpci2_of_probe(struct platform_device *ofdev) { struct grpci2_regs *regs; struct grpci2_priv *priv; diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index 75b31bcdeadf..baf4366e2d6a 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -356,7 +356,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, return dev; } -static void __devinit apb_calc_first_last(u8 map, u32 *first_p, u32 *last_p) +static void apb_calc_first_last(u8 map, u32 *first_p, u32 *last_p) { u32 idx, first, last; @@ -378,9 +378,9 @@ static void __devinit apb_calc_first_last(u8 map, u32 *first_p, u32 *last_p) /* Cook up fake bus resources for SUNW,simba PCI bridges which lack * a proper 'ranges' property. */ -static void __devinit apb_fake_ranges(struct pci_dev *dev, - struct pci_bus *bus, - struct pci_pbm_info *pbm) +static void apb_fake_ranges(struct pci_dev *dev, + struct pci_bus *bus, + struct pci_pbm_info *pbm) { struct pci_bus_region region; struct resource *res; @@ -404,15 +404,15 @@ static void __devinit apb_fake_ranges(struct pci_dev *dev, pcibios_bus_to_resource(dev, res, ®ion); } -static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm, - struct device_node *node, - struct pci_bus *bus); +static void pci_of_scan_bus(struct pci_pbm_info *pbm, + struct device_node *node, + struct pci_bus *bus); #define GET_64BIT(prop, i) ((((u64) (prop)[(i)]) << 32) | (prop)[(i)+1]) -static void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm, - struct device_node *node, - struct pci_dev *dev) +static void of_scan_pci_bridge(struct pci_pbm_info *pbm, + struct device_node *node, + struct pci_dev *dev) { struct pci_bus *bus; const u32 *busrange, *ranges; @@ -503,9 +503,9 @@ after_ranges: pci_of_scan_bus(pbm, node, bus); } -static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm, - struct device_node *node, - struct pci_bus *bus) +static void pci_of_scan_bus(struct pci_pbm_info *pbm, + struct device_node *node, + struct pci_bus *bus) { struct device_node *child; const u32 *reg; @@ -564,7 +564,7 @@ show_pciobppath_attr(struct device * dev, struct device_attribute * attr, char * static DEVICE_ATTR(obppath, S_IRUSR | S_IRGRP | S_IROTH, show_pciobppath_attr, NULL); -static void __devinit pci_bus_register_of_sysfs(struct pci_bus *bus) +static void pci_bus_register_of_sysfs(struct pci_bus *bus) { struct pci_dev *dev; struct pci_bus *child_bus; @@ -585,8 +585,8 @@ static void __devinit pci_bus_register_of_sysfs(struct pci_bus *bus) pci_bus_register_of_sysfs(child_bus); } -struct pci_bus * __devinit pci_scan_one_pbm(struct pci_pbm_info *pbm, - struct device *parent) +struct pci_bus *pci_scan_one_pbm(struct pci_pbm_info *pbm, + struct device *parent) { LIST_HEAD(resources); struct device_node *node = pbm->op->dev.of_node; @@ -618,7 +618,7 @@ struct pci_bus * __devinit pci_scan_one_pbm(struct pci_pbm_info *pbm, return bus; } -void __devinit pcibios_fixup_bus(struct pci_bus *pbus) +void pcibios_fixup_bus(struct pci_bus *pbus) { } @@ -949,8 +949,7 @@ static int __init pcibios_init(void) subsys_initcall(pcibios_init); #ifdef CONFIG_SYSFS -static void __devinit pci_bus_slot_names(struct device_node *node, - struct pci_bus *bus) +static void pci_bus_slot_names(struct device_node *node, struct pci_bus *bus) { const struct pci_slot_names { u32 slot_mask; diff --git a/arch/sparc/kernel/pci_fire.c b/arch/sparc/kernel/pci_fire.c index 188f935276fd..e60fc6a67e9b 100644 --- a/arch/sparc/kernel/pci_fire.c +++ b/arch/sparc/kernel/pci_fire.c @@ -408,8 +408,8 @@ static void pci_fire_hw_init(struct pci_pbm_info *pbm) upa_writeq(~(u64)0, pbm->pbm_regs + FIRE_PEC_IENAB); } -static int __devinit pci_fire_pbm_init(struct pci_pbm_info *pbm, - struct platform_device *op, u32 portid) +static int pci_fire_pbm_init(struct pci_pbm_info *pbm, + struct platform_device *op, u32 portid) { const struct linux_prom64_registers *regs; struct device_node *dp = op->dev.of_node; @@ -454,7 +454,7 @@ static int __devinit pci_fire_pbm_init(struct pci_pbm_info *pbm, return 0; } -static int __devinit fire_probe(struct platform_device *op) +static int fire_probe(struct platform_device *op) { struct device_node *dp = op->dev.of_node; struct pci_pbm_info *pbm; diff --git a/arch/sparc/kernel/pci_psycho.c b/arch/sparc/kernel/pci_psycho.c index f4d29e15ce71..c647634ead2b 100644 --- a/arch/sparc/kernel/pci_psycho.c +++ b/arch/sparc/kernel/pci_psycho.c @@ -366,8 +366,8 @@ static void pbm_config_busmastering(struct pci_pbm_info *pbm) pci_config_write8(addr, 64); } -static void __devinit psycho_scan_bus(struct pci_pbm_info *pbm, - struct device *parent) +static void psycho_scan_bus(struct pci_pbm_info *pbm, + struct device *parent) { pbm_config_busmastering(pbm); pbm->is_66mhz_capable = 0; @@ -483,15 +483,15 @@ static void psycho_pbm_strbuf_init(struct pci_pbm_info *pbm, #define PSYCHO_MEMSPACE_B 0x180000000UL #define PSYCHO_MEMSPACE_SIZE 0x07fffffffUL -static void __devinit psycho_pbm_init(struct pci_pbm_info *pbm, - struct platform_device *op, int is_pbm_a) +static void psycho_pbm_init(struct pci_pbm_info *pbm, + struct platform_device *op, int is_pbm_a) { psycho_pbm_init_common(pbm, op, "PSYCHO", PBM_CHIP_TYPE_PSYCHO); psycho_pbm_strbuf_init(pbm, is_pbm_a); psycho_scan_bus(pbm, &op->dev); } -static struct pci_pbm_info * __devinit psycho_find_sibling(u32 upa_portid) +static struct pci_pbm_info *psycho_find_sibling(u32 upa_portid) { struct pci_pbm_info *pbm; @@ -504,7 +504,7 @@ static struct pci_pbm_info * __devinit psycho_find_sibling(u32 upa_portid) #define PSYCHO_CONFIGSPACE 0x001000000UL -static int __devinit psycho_probe(struct platform_device *op) +static int psycho_probe(struct platform_device *op) { const struct linux_prom64_registers *pr_regs; struct device_node *dp = op->dev.of_node; diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c index 3efaa4644d60..6f00d27e8dac 100644 --- a/arch/sparc/kernel/pci_sabre.c +++ b/arch/sparc/kernel/pci_sabre.c @@ -403,8 +403,7 @@ static void apb_init(struct pci_bus *sabre_bus) } } -static void __devinit sabre_scan_bus(struct pci_pbm_info *pbm, - struct device *parent) +static void sabre_scan_bus(struct pci_pbm_info *pbm, struct device *parent) { static int once; @@ -443,8 +442,8 @@ static void __devinit sabre_scan_bus(struct pci_pbm_info *pbm, sabre_register_error_handlers(pbm); } -static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm, - struct platform_device *op) +static void sabre_pbm_init(struct pci_pbm_info *pbm, + struct platform_device *op) { psycho_pbm_init_common(pbm, op, "SABRE", PBM_CHIP_TYPE_SABRE); pbm->pci_afsr = pbm->controller_regs + SABRE_PIOAFSR; @@ -454,7 +453,7 @@ static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm, } static const struct of_device_id sabre_match[]; -static int __devinit sabre_probe(struct platform_device *op) +static int sabre_probe(struct platform_device *op) { const struct of_device_id *match; const struct linux_prom64_registers *pr_regs; diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c index 13d4aa20b5a5..8f76f23dac38 100644 --- a/arch/sparc/kernel/pci_schizo.c +++ b/arch/sparc/kernel/pci_schizo.c @@ -1064,8 +1064,7 @@ static void pbm_config_busmastering(struct pci_pbm_info *pbm) pci_config_write8(addr, 64); } -static void __devinit schizo_scan_bus(struct pci_pbm_info *pbm, - struct device *parent) +static void schizo_scan_bus(struct pci_pbm_info *pbm, struct device *parent) { pbm_config_busmastering(pbm); pbm->is_66mhz_capable = @@ -1307,9 +1306,9 @@ static void schizo_pbm_hw_init(struct pci_pbm_info *pbm) } } -static int __devinit schizo_pbm_init(struct pci_pbm_info *pbm, - struct platform_device *op, u32 portid, - int chip_type) +static int schizo_pbm_init(struct pci_pbm_info *pbm, + struct platform_device *op, u32 portid, + int chip_type) { const struct linux_prom64_registers *regs; struct device_node *dp = op->dev.of_node; @@ -1400,8 +1399,7 @@ static inline int portid_compare(u32 x, u32 y, int chip_type) return (x == y); } -static struct pci_pbm_info * __devinit schizo_find_sibling(u32 portid, - int chip_type) +static struct pci_pbm_info *schizo_find_sibling(u32 portid, int chip_type) { struct pci_pbm_info *pbm; @@ -1412,7 +1410,7 @@ static struct pci_pbm_info * __devinit schizo_find_sibling(u32 portid, return NULL; } -static int __devinit __schizo_init(struct platform_device *op, unsigned long chip_type) +static int __schizo_init(struct platform_device *op, unsigned long chip_type) { struct device_node *dp = op->dev.of_node; struct pci_pbm_info *pbm; @@ -1460,7 +1458,7 @@ out_err: } static const struct of_device_id schizo_match[]; -static int __devinit schizo_probe(struct platform_device *op) +static int schizo_probe(struct platform_device *op) { const struct of_device_id *match; diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c index 051b69caeffd..d07f6b29aed8 100644 --- a/arch/sparc/kernel/pci_sun4v.c +++ b/arch/sparc/kernel/pci_sun4v.c @@ -536,8 +536,7 @@ static struct dma_map_ops sun4v_dma_ops = { .unmap_sg = dma_4v_unmap_sg, }; -static void __devinit pci_sun4v_scan_bus(struct pci_pbm_info *pbm, - struct device *parent) +static void pci_sun4v_scan_bus(struct pci_pbm_info *pbm, struct device *parent) { struct property *prop; struct device_node *dp; @@ -550,8 +549,8 @@ static void __devinit pci_sun4v_scan_bus(struct pci_pbm_info *pbm, /* XXX register error interrupt handlers XXX */ } -static unsigned long __devinit probe_existing_entries(struct pci_pbm_info *pbm, - struct iommu *iommu) +static unsigned long probe_existing_entries(struct pci_pbm_info *pbm, + struct iommu *iommu) { struct iommu_arena *arena = &iommu->arena; unsigned long i, cnt = 0; @@ -578,7 +577,7 @@ static unsigned long __devinit probe_existing_entries(struct pci_pbm_info *pbm, return cnt; } -static int __devinit pci_sun4v_iommu_init(struct pci_pbm_info *pbm) +static int pci_sun4v_iommu_init(struct pci_pbm_info *pbm) { static const u32 vdma_default[] = { 0x80000000, 0x80000000 }; struct iommu *iommu = pbm->iommu; @@ -879,8 +878,8 @@ static void pci_sun4v_msi_init(struct pci_pbm_info *pbm) } #endif /* !(CONFIG_PCI_MSI) */ -static int __devinit pci_sun4v_pbm_init(struct pci_pbm_info *pbm, - struct platform_device *op, u32 devhandle) +static int pci_sun4v_pbm_init(struct pci_pbm_info *pbm, + struct platform_device *op, u32 devhandle) { struct device_node *dp = op->dev.of_node; int err; @@ -919,7 +918,7 @@ static int __devinit pci_sun4v_pbm_init(struct pci_pbm_info *pbm, return 0; } -static int __devinit pci_sun4v_probe(struct platform_device *op) +static int pci_sun4v_probe(struct platform_device *op) { const struct linux_prom64_registers *regs; static int hvapi_negotiated = 0; diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index 521fdf1b20e5..09f4fdd8d808 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -439,8 +439,7 @@ int pcic_present(void) return pcic0_up; } -static int __devinit pdev_to_pnode(struct linux_pbm_info *pbm, - struct pci_dev *pdev) +static int pdev_to_pnode(struct linux_pbm_info *pbm, struct pci_dev *pdev) { struct linux_prom_pci_registers regs[PROMREG_MAX]; int err; @@ -595,7 +594,7 @@ pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node) /* * Normally called from {do_}pci_scan_bus... */ -void __devinit pcibios_fixup_bus(struct pci_bus *bus) +void pcibios_fixup_bus(struct pci_bus *bus) { struct pci_dev *dev; int i, has_io, has_mem; diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c index 0e3202239ff5..dcbb62f63068 100644 --- a/arch/sparc/kernel/pmc.c +++ b/arch/sparc/kernel/pmc.c @@ -52,7 +52,7 @@ static void pmc_swift_idle(void) #endif } -static int __devinit pmc_probe(struct platform_device *op) +static int pmc_probe(struct platform_device *op) { regs = of_ioremap(&op->resource[0], 0, resource_size(&op->resource[0]), PMC_OBPNAME); diff --git a/arch/sparc/kernel/power.c b/arch/sparc/kernel/power.c index 0d39075063b2..4cb23c41553f 100644 --- a/arch/sparc/kernel/power.c +++ b/arch/sparc/kernel/power.c @@ -23,7 +23,7 @@ static irqreturn_t power_handler(int irq, void *dev_id) return IRQ_HANDLED; } -static int __devinit has_button_interrupt(unsigned int irq, struct device_node *dp) +static int has_button_interrupt(unsigned int irq, struct device_node *dp) { if (irq == 0xffffffff) return 0; @@ -33,7 +33,7 @@ static int __devinit has_button_interrupt(unsigned int irq, struct device_node * return 1; } -static int __devinit power_probe(struct platform_device *op) +static int power_probe(struct platform_device *op) { struct resource *res = &op->resource[0]; unsigned int irq = op->archdata.irqs[0]; diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index d94b878577b7..537eb66abd06 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -1180,7 +1180,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { } -void __devinit smp_prepare_boot_cpu(void) +void smp_prepare_boot_cpu(void) { } @@ -1194,7 +1194,7 @@ void __init smp_setup_processor_id(void) xcall_deliver_impl = hypervisor_xcall_deliver; } -void __devinit smp_fill_in_sib_core_maps(void) +void smp_fill_in_sib_core_maps(void) { unsigned int i; diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c index 953641549e82..c4c27b0f9063 100644 --- a/arch/sparc/kernel/time_32.c +++ b/arch/sparc/kernel/time_32.c @@ -278,7 +278,7 @@ static struct platform_device m48t59_rtc = { }, }; -static int __devinit clock_probe(struct platform_device *op) +static int clock_probe(struct platform_device *op) { struct device_node *dp = op->dev.of_node; const char *model = of_get_property(dp, "model", NULL); diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c index e861072b9c52..c3d82b5f54ca 100644 --- a/arch/sparc/kernel/time_64.c +++ b/arch/sparc/kernel/time_64.c @@ -419,7 +419,7 @@ static struct platform_device rtc_cmos_device = { .num_resources = 1, }; -static int __devinit rtc_probe(struct platform_device *op) +static int rtc_probe(struct platform_device *op) { struct resource *r; @@ -477,7 +477,7 @@ static struct platform_device rtc_bq4802_device = { .num_resources = 1, }; -static int __devinit bq4802_probe(struct platform_device *op) +static int bq4802_probe(struct platform_device *op) { printk(KERN_INFO "%s: BQ4802 regs at 0x%llx\n", @@ -534,7 +534,7 @@ static struct platform_device m48t59_rtc = { }, }; -static int __devinit mostek_probe(struct platform_device *op) +static int mostek_probe(struct platform_device *op) { struct device_node *dp = op->dev.of_node; @@ -746,7 +746,7 @@ void __irq_entry timer_interrupt(int irq, struct pt_regs *regs) set_irq_regs(old_regs); } -void __devinit setup_sparc64_timer(void) +void setup_sparc64_timer(void) { struct clock_event_device *sevt; unsigned long pstate; @@ -844,7 +844,7 @@ unsigned long long sched_clock(void) >> SPARC64_NSEC_PER_CYC_SHIFT; } -int __devinit read_current_timer(unsigned long *timer_val) +int read_current_timer(unsigned long *timer_val) { *timer_val = tick_ops->get_tick(); return 0; diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 85be1ca539b2..c3b72423c846 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -87,8 +87,8 @@ static unsigned long cpu_pgsz_mask; #define MAX_BANKS 32 -static struct linux_prom64_registers pavail[MAX_BANKS] __devinitdata; -static int pavail_ents __devinitdata; +static struct linux_prom64_registers pavail[MAX_BANKS]; +static int pavail_ents; static int cmp_p64(const void *a, const void *b) { @@ -1931,7 +1931,7 @@ void __init paging_init(void) printk("Booting Linux...\n"); } -int __devinit page_in_phys_avail(unsigned long paddr) +int page_in_phys_avail(unsigned long paddr) { int i; From d0b9cec3e27d0e9fda2fbf6aaacece68c99b1104 Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Fri, 11 Jan 2013 22:47:02 +0000 Subject: [PATCH 312/553] be2net: fix unconditionally returning IRQ_HANDLED in INTx commit e49cc34f introduced an unconditional IRQ_HANDLED return in be_intx() to workaround Lancer and BE2 HW issues. This is bad as it prevents the kernel from detecting interrupt storms due to broken HW. The BE2/Lancer HW issues are: 1) In Lancer, there is no means for the driver to detect if the interrupt belonged to device, other than counting and notifying events. 2) In Lancer de-asserting INTx takes a while, causing the INTx irq handler to be called multiple times till the de-assert happens. 3) In BE2, we see an occasional interrupt even when EQs are unarmed. Issue (1) can cause the notified events to be orphaned, if NAPI was already running. This patch fixes this issue by scheduling NAPI only if it is not scheduled already. Doing this also takes care of possible events_get() race that may be caused due to issue (2) and (3). Also, IRQ_HANDLED is returned only the first time zero events are detected. (Thanks Ben H. for the feedback and suggestions.) Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 1 + drivers/net/ethernet/emulex/benet/be_main.c | 31 ++++++++++++++------- 2 files changed, 22 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index 3bc1912afba9..4eba17b83ba8 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -190,6 +190,7 @@ struct be_eq_obj { u8 idx; /* array index */ u16 tx_budget; + u16 spurious_intr; struct napi_struct napi; struct be_adapter *adapter; } ____cacheline_aligned_in_smp; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 9dca22be8125..5c995700e534 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2026,19 +2026,30 @@ static irqreturn_t be_intx(int irq, void *dev) struct be_adapter *adapter = eqo->adapter; int num_evts = 0; - /* On Lancer, clear-intr bit of the EQ DB does not work. - * INTx is de-asserted only on notifying num evts. + /* IRQ is not expected when NAPI is scheduled as the EQ + * will not be armed. + * But, this can happen on Lancer INTx where it takes + * a while to de-assert INTx or in BE2 where occasionaly + * an interrupt may be raised even when EQ is unarmed. + * If NAPI is already scheduled, then counting & notifying + * events will orphan them. */ - if (lancer_chip(adapter)) + if (napi_schedule_prep(&eqo->napi)) { num_evts = events_get(eqo); - - /* The EQ-notify may not de-assert INTx rightaway, causing - * the ISR to be invoked again. So, return HANDLED even when - * num_evts is zero. - */ + __napi_schedule(&eqo->napi); + if (num_evts) + eqo->spurious_intr = 0; + } be_eq_notify(adapter, eqo->q.id, false, true, num_evts); - napi_schedule(&eqo->napi); - return IRQ_HANDLED; + + /* Return IRQ_HANDLED only for the the first spurious intr + * after a valid intr to stop the kernel from branding + * this irq as a bad one! + */ + if (num_evts || eqo->spurious_intr++ == 0) + return IRQ_HANDLED; + else + return IRQ_NONE; } static irqreturn_t be_msix(int irq, void *dev) From 4459146deb9eeabb0adf10d829bd8019d16bb0f4 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Sun, 13 Jan 2013 17:08:01 +1000 Subject: [PATCH 313/553] drm/nouveau/devinit: ensure legacy vga control is enabled during post Fixes ACPI backlight control after suspend on some systems. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/bios/init.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/init.c b/drivers/gpu/drm/nouveau/core/subdev/bios/init.c index 2917d552689b..690ed438b2ad 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bios/init.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/init.c @@ -1534,7 +1534,6 @@ init_io(struct nvbios_init *init) mdelay(10); init_wr32(init, 0x614100, 0x10000018); init_wr32(init, 0x614900, 0x10000018); - return; } value = init_rdport(init, port) & mask; From 1a1841d300a1b6cac35b0761755364d6d3e10b2e Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 10 Dec 2012 18:53:43 +1000 Subject: [PATCH 314/553] drm/nouveau: do not forcibly power on lvds panels This fix was put in place to fix a bug where the eDP panel on certain laptops fails to respond over the aux channel after suspend. It appears that on some systems (Dell M6600, with LVDS panel) there's a very bad interaction with the eDP init table that causes the SOR to get very confused and not drive the panel correctly, leading to bleed. A DPMS off/on cycle is enough to bring it back, but, this will avoid the problem by not touching the panel GPIOs at times we're not meant to. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_connector.c | 30 ++++++++++++++++++--- drivers/gpu/drm/nouveau/nouveau_display.c | 9 ------- 2 files changed, 26 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index ac340ba32017..e620ba8271b4 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -127,12 +127,26 @@ nouveau_connector_ddc_detect(struct drm_connector *connector, struct nouveau_encoder **pnv_encoder) { struct drm_device *dev = connector->dev; + struct nouveau_connector *nv_connector = nouveau_connector(connector); struct nouveau_drm *drm = nouveau_drm(dev); + struct nouveau_gpio *gpio = nouveau_gpio(drm->device); struct nouveau_i2c *i2c = nouveau_i2c(drm->device); - int i; + struct nouveau_i2c_port *port = NULL; + int i, panel = -ENODEV; + + /* eDP panels need powering on by us (if the VBIOS doesn't default it + * to on) before doing any AUX channel transactions. LVDS panel power + * is handled by the SOR itself, and not required for LVDS DDC. + */ + if (nv_connector->type == DCB_CONNECTOR_eDP) { + panel = gpio->get(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff); + if (panel == 0) { + gpio->set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, 1); + msleep(300); + } + } for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) { - struct nouveau_i2c_port *port = NULL; struct nouveau_encoder *nv_encoder; struct drm_mode_object *obj; int id; @@ -150,11 +164,19 @@ nouveau_connector_ddc_detect(struct drm_connector *connector, port = i2c->find(i2c, nv_encoder->dcb->i2c_index); if (port && nv_probe_i2c(port, 0x50)) { *pnv_encoder = nv_encoder; - return port; + break; } + + port = NULL; } - return NULL; + /* eDP panel not detected, restore panel power GPIO to previous + * state to avoid confusing the SOR for other output types. + */ + if (!port && panel == 0) + gpio->set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, panel); + + return port; } static struct nouveau_encoder * diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index e4188f24fc75..508b00a2ce0d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -225,15 +225,6 @@ nouveau_display_init(struct drm_device *dev) if (ret) return ret; - /* power on internal panel if it's not already. the init tables of - * some vbios default this to off for some reason, causing the - * panel to not work after resume - */ - if (gpio && gpio->get(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff) == 0) { - gpio->set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, 1); - msleep(300); - } - /* enable polling for external displays */ drm_kms_helper_poll_enable(dev); From 4c4101d29fb6c63f78791d02c437702b11e1d4f0 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 2 Dec 2012 12:56:22 +0100 Subject: [PATCH 315/553] drm/nouveau: add locking around instobj list operations Fixes memory corruptions, oopses, etc. when multiple gpuobjs are simultaneously created or destroyed. Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- .../drm/nouveau/core/subdev/instmem/base.c | 35 ++++++++++++++----- 1 file changed, 27 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/instmem/base.c b/drivers/gpu/drm/nouveau/core/subdev/instmem/base.c index 1188227ca6aa..6565f3dbbe04 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/instmem/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/instmem/base.c @@ -40,15 +40,21 @@ nouveau_instobj_create_(struct nouveau_object *parent, if (ret) return ret; + mutex_lock(&imem->base.mutex); list_add(&iobj->head, &imem->list); + mutex_unlock(&imem->base.mutex); return 0; } void nouveau_instobj_destroy(struct nouveau_instobj *iobj) { - if (iobj->head.prev) - list_del(&iobj->head); + struct nouveau_subdev *subdev = nv_subdev(iobj->base.engine); + + mutex_lock(&subdev->mutex); + list_del(&iobj->head); + mutex_unlock(&subdev->mutex); + return nouveau_object_destroy(&iobj->base); } @@ -88,6 +94,8 @@ nouveau_instmem_init(struct nouveau_instmem *imem) if (ret) return ret; + mutex_lock(&imem->base.mutex); + list_for_each_entry(iobj, &imem->list, head) { if (iobj->suspend) { for (i = 0; i < iobj->size; i += 4) @@ -97,6 +105,8 @@ nouveau_instmem_init(struct nouveau_instmem *imem) } } + mutex_unlock(&imem->base.mutex); + return 0; } @@ -104,17 +114,26 @@ int nouveau_instmem_fini(struct nouveau_instmem *imem, bool suspend) { struct nouveau_instobj *iobj; - int i; + int i, ret = 0; if (suspend) { + mutex_lock(&imem->base.mutex); + list_for_each_entry(iobj, &imem->list, head) { iobj->suspend = vmalloc(iobj->size); - if (iobj->suspend) { - for (i = 0; i < iobj->size; i += 4) - iobj->suspend[i / 4] = nv_ro32(iobj, i); - } else - return -ENOMEM; + if (!iobj->suspend) { + ret = -ENOMEM; + break; + } + + for (i = 0; i < iobj->size; i += 4) + iobj->suspend[i / 4] = nv_ro32(iobj, i); } + + mutex_unlock(&imem->base.mutex); + + if (ret) + return ret; } return nouveau_subdev_fini(&imem->base, suspend); From cfd376b6bfccf33782a0748a9c70f7f752f8b869 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 10 Dec 2012 21:30:51 +0100 Subject: [PATCH 316/553] drm/nouveau/vm: fix memory corruption when pgt allocation fails If we return freed vm, nouveau_drm_open will happily call nouveau_cli_destroy, which will try to free it again. Reported-by: Peter Hurley Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/vm/base.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/vm/base.c b/drivers/gpu/drm/nouveau/core/subdev/vm/base.c index 082c11b75acb..77c67fc970e6 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/vm/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/vm/base.c @@ -352,7 +352,7 @@ nouveau_vm_create(struct nouveau_vmmgr *vmm, u64 offset, u64 length, u64 mm_length = (offset + length) - mm_offset; int ret; - vm = *pvm = kzalloc(sizeof(*vm), GFP_KERNEL); + vm = kzalloc(sizeof(*vm), GFP_KERNEL); if (!vm) return -ENOMEM; @@ -376,6 +376,8 @@ nouveau_vm_create(struct nouveau_vmmgr *vmm, u64 offset, u64 length, return ret; } + *pvm = vm; + return 0; } From 82c805abb20946dcb343cd607327e4d720bf6b28 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 10 Dec 2012 21:57:20 +0100 Subject: [PATCH 317/553] drm/nouveau: don't return freed object from nouveau_handle_create Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/core/handle.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/core/handle.c b/drivers/gpu/drm/nouveau/core/core/handle.c index b8d2cbf8a7a7..264c2b338ac3 100644 --- a/drivers/gpu/drm/nouveau/core/core/handle.c +++ b/drivers/gpu/drm/nouveau/core/core/handle.c @@ -109,7 +109,7 @@ nouveau_handle_create(struct nouveau_object *parent, u32 _parent, u32 _handle, while (!nv_iclass(namedb, NV_NAMEDB_CLASS)) namedb = namedb->parent; - handle = *phandle = kzalloc(sizeof(*handle), GFP_KERNEL); + handle = kzalloc(sizeof(*handle), GFP_KERNEL); if (!handle) return -ENOMEM; @@ -146,6 +146,9 @@ nouveau_handle_create(struct nouveau_object *parent, u32 _parent, u32 _handle, } hprintk(handle, TRACE, "created\n"); + + *phandle = handle; + return 0; } From dd5700ea98ad0b375a72525ce7d7edddf15b2693 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 10 Dec 2012 21:59:52 +0100 Subject: [PATCH 318/553] drm/nouveau: fix nouveau_client allocation failure path Depending on the point of failure, freed object would be returned or memory leak would happen. Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/core/client.c | 4 +--- drivers/gpu/drm/nouveau/core/include/core/client.h | 3 +++ drivers/gpu/drm/nouveau/nouveau_drm.c | 7 ++++++- 3 files changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/core/core/client.c b/drivers/gpu/drm/nouveau/core/core/client.c index c617f0480071..8bbb58f94a19 100644 --- a/drivers/gpu/drm/nouveau/core/core/client.c +++ b/drivers/gpu/drm/nouveau/core/core/client.c @@ -66,10 +66,8 @@ nouveau_client_create_(const char *name, u64 devname, const char *cfg, ret = nouveau_handle_create(nv_object(client), ~0, ~0, nv_object(client), &client->root); - if (ret) { - nouveau_namedb_destroy(&client->base); + if (ret) return ret; - } /* prevent init/fini being called, os in in charge of this */ atomic_set(&nv_object(client)->usecount, 2); diff --git a/drivers/gpu/drm/nouveau/core/include/core/client.h b/drivers/gpu/drm/nouveau/core/include/core/client.h index 0193532ceac9..63acc0346ff2 100644 --- a/drivers/gpu/drm/nouveau/core/include/core/client.h +++ b/drivers/gpu/drm/nouveau/core/include/core/client.h @@ -36,6 +36,9 @@ nouveau_client(void *obj) int nouveau_client_create_(const char *name, u64 device, const char *cfg, const char *dbg, int, void **); +#define nouveau_client_destroy(p) \ + nouveau_namedb_destroy(&(p)->base) + int nouveau_client_init(struct nouveau_client *); int nouveau_client_fini(struct nouveau_client *, bool suspend); diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 01c403ddb99b..efcfefa04123 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -84,11 +84,16 @@ nouveau_cli_create(struct pci_dev *pdev, const char *name, struct nouveau_cli *cli; int ret; + *pcli = NULL; ret = nouveau_client_create_(name, nouveau_name(pdev), nouveau_config, nouveau_debug, size, pcli); cli = *pcli; - if (ret) + if (ret) { + if (cli) + nouveau_client_destroy(&cli->base); + *pcli = NULL; return ret; + } mutex_init(&cli->mutex); return 0; From 92441b2263866c27ef48137be5aa6c8c692652fc Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Tue, 18 Dec 2012 20:30:47 +0100 Subject: [PATCH 319/553] drm/nouveau: fix blank LVDS screen regression on pre-nv50 cards Commit 2a44e499 ("drm/nouveau/disp: introduce proper init/fini, separate from create/destroy") started to call display init routines on pre-nv50 hardware on module load. But LVDS init code sets driver state in a way which prevents modesetting code from operating properly. nv04_display_init calls nv04_dfp_restore, which sets encoder->last_dpms to NV_DPMS_CLEARED. drm_crtc_helper_set_mode nv04_dfp_prepare nv04_lvds_dpms(DRM_MODE_DPMS_OFF) nv04_lvds_dpms checks last_dpms mode (which is NV_DPMS_CLEARED) and wrongly assumes it's a "powersaving mode", the new one (DRM_MODE_DPMS_OFF) is too, so it skips calling some crucial lvds scripts. Reported-by: Chris Paulson-Ellis Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/nv04_dfp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv04_dfp.c b/drivers/gpu/drm/nouveau/nv04_dfp.c index 184cdf806761..39ffc07f906b 100644 --- a/drivers/gpu/drm/nouveau/nv04_dfp.c +++ b/drivers/gpu/drm/nouveau/nv04_dfp.c @@ -505,7 +505,7 @@ static void nv04_dfp_update_backlight(struct drm_encoder *encoder, int mode) static inline bool is_powersaving_dpms(int mode) { - return (mode != DRM_MODE_DPMS_ON); + return mode != DRM_MODE_DPMS_ON && mode != NV_DPMS_CLEARED; } static void nv04_lvds_dpms(struct drm_encoder *encoder, int mode) From f20ebd034eab43fd38c58b11c5bb5fb125e5f7d7 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Tue, 25 Dec 2012 18:13:22 +0100 Subject: [PATCH 320/553] drm/nv17-50: restore fence buffer on resume Since commit 5e120f6e4b3f35b741c5445dfc755f50128c3c44 "drm/nouveau/fence: convert to exec engine, and improve channel sync" nouveau fence sync implementation for nv17-50 and nvc0+ started to rely on state of fence buffer left by previous sync operation. But as pinned bo's (where fence state is stored) are not saved+restored across suspend/resume, we need to do it manually. nvc0+ was fixed by commit d6ba6d215a538a58f0f0026f0961b0b9125e8042 "drm/nvc0/fence: restore pre-suspend fence buffer context on resume". Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=50121 Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/nouveau_fence.h | 1 + drivers/gpu/drm/nouveau/nv10_fence.c | 8 ++++++++ drivers/gpu/drm/nouveau/nv50_fence.c | 1 + 3 files changed, 10 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.h b/drivers/gpu/drm/nouveau/nouveau_fence.h index bedafd1c9539..cdb83acdffe2 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fence.h +++ b/drivers/gpu/drm/nouveau/nouveau_fence.h @@ -60,6 +60,7 @@ u32 nv10_fence_read(struct nouveau_channel *); void nv10_fence_context_del(struct nouveau_channel *); void nv10_fence_destroy(struct nouveau_drm *); int nv10_fence_create(struct nouveau_drm *); +void nv17_fence_resume(struct nouveau_drm *drm); int nv50_fence_create(struct nouveau_drm *); int nv84_fence_create(struct nouveau_drm *); diff --git a/drivers/gpu/drm/nouveau/nv10_fence.c b/drivers/gpu/drm/nouveau/nv10_fence.c index 7ae7f97a6d4d..03017f24d593 100644 --- a/drivers/gpu/drm/nouveau/nv10_fence.c +++ b/drivers/gpu/drm/nouveau/nv10_fence.c @@ -162,6 +162,13 @@ nv10_fence_destroy(struct nouveau_drm *drm) kfree(priv); } +void nv17_fence_resume(struct nouveau_drm *drm) +{ + struct nv10_fence_priv *priv = drm->fence; + + nouveau_bo_wr32(priv->bo, 0, priv->sequence); +} + int nv10_fence_create(struct nouveau_drm *drm) { @@ -197,6 +204,7 @@ nv10_fence_create(struct nouveau_drm *drm) if (ret == 0) { nouveau_bo_wr32(priv->bo, 0x000, 0x00000000); priv->base.sync = nv17_fence_sync; + priv->base.resume = nv17_fence_resume; } } diff --git a/drivers/gpu/drm/nouveau/nv50_fence.c b/drivers/gpu/drm/nouveau/nv50_fence.c index c20f2727ea0b..d889f3ac0d41 100644 --- a/drivers/gpu/drm/nouveau/nv50_fence.c +++ b/drivers/gpu/drm/nouveau/nv50_fence.c @@ -122,6 +122,7 @@ nv50_fence_create(struct nouveau_drm *drm) if (ret == 0) { nouveau_bo_wr32(priv->bo, 0x000, 0x00000000); priv->base.sync = nv17_fence_sync; + priv->base.resume = nv17_fence_resume; } if (ret) From c684cef795cb5356ae7f6a7ad613946eef14265f Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Thu, 3 Jan 2013 19:38:45 +0100 Subject: [PATCH 321/553] drm/nv50/disp: fix selection of bios script for analog outputs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Analog output number was overwritten by value from digital output path. Fix it. Fixes resume from s2ram: https://bugs.freedesktop.org/show_bug.cgi?id=58729 (as stumbled on by J Binder, Pontus Fuchs and me) Fixes blank screen on module load (reported by Sune Mølgaard). Fixes regression from commit 186ecad21c854385823a430b1402053ae7fd59dc ("drm/nv50/disp: move remaining interrupt handling into core"). Reported-by: J Binder Reported-by: Pontus Fuchs Reported-by: Sune Mølgaard Signed-off-by: Marcin Slusarz Tested-by: Marcin Slusarz Tested-by: Sune Mølgaard Signed-off-by: Ben Skeggs --- .../gpu/drm/nouveau/core/engine/disp/nv50.c | 46 +++++++++++-------- 1 file changed, 26 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c index 0f09af135415..ca1a7d76a95b 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c @@ -851,20 +851,23 @@ exec_script(struct nv50_disp_priv *priv, int head, int id) for (i = 0; !(ctrl & (1 << head)) && i < 3; i++) ctrl = nv_rd32(priv, 0x610b5c + (i * 8)); - if (nv_device(priv)->chipset < 0x90 || - nv_device(priv)->chipset == 0x92 || - nv_device(priv)->chipset == 0xa0) { - for (i = 0; !(ctrl & (1 << head)) && i < 2; i++) - ctrl = nv_rd32(priv, 0x610b74 + (i * 8)); - i += 3; - } else { - for (i = 0; !(ctrl & (1 << head)) && i < 4; i++) - ctrl = nv_rd32(priv, 0x610798 + (i * 8)); - i += 3; + if (!(ctrl & (1 << head))) { + if (nv_device(priv)->chipset < 0x90 || + nv_device(priv)->chipset == 0x92 || + nv_device(priv)->chipset == 0xa0) { + for (i = 0; !(ctrl & (1 << head)) && i < 2; i++) + ctrl = nv_rd32(priv, 0x610b74 + (i * 8)); + i += 4; + } else { + for (i = 0; !(ctrl & (1 << head)) && i < 4; i++) + ctrl = nv_rd32(priv, 0x610798 + (i * 8)); + i += 4; + } } if (!(ctrl & (1 << head))) return false; + i--; data = exec_lookup(priv, head, i, ctrl, &dcb, &ver, &hdr, &cnt, &len, &info); if (data) { @@ -898,20 +901,23 @@ exec_clkcmp(struct nv50_disp_priv *priv, int head, int id, u32 pclk, for (i = 0; !(ctrl & (1 << head)) && i < 3; i++) ctrl = nv_rd32(priv, 0x610b58 + (i * 8)); - if (nv_device(priv)->chipset < 0x90 || - nv_device(priv)->chipset == 0x92 || - nv_device(priv)->chipset == 0xa0) { - for (i = 0; !(ctrl & (1 << head)) && i < 2; i++) - ctrl = nv_rd32(priv, 0x610b70 + (i * 8)); - i += 3; - } else { - for (i = 0; !(ctrl & (1 << head)) && i < 4; i++) - ctrl = nv_rd32(priv, 0x610794 + (i * 8)); - i += 3; + if (!(ctrl & (1 << head))) { + if (nv_device(priv)->chipset < 0x90 || + nv_device(priv)->chipset == 0x92 || + nv_device(priv)->chipset == 0xa0) { + for (i = 0; !(ctrl & (1 << head)) && i < 2; i++) + ctrl = nv_rd32(priv, 0x610b70 + (i * 8)); + i += 4; + } else { + for (i = 0; !(ctrl & (1 << head)) && i < 4; i++) + ctrl = nv_rd32(priv, 0x610794 + (i * 8)); + i += 4; + } } if (!(ctrl & (1 << head))) return 0x0000; + i--; data = exec_lookup(priv, head, i, ctrl, outp, &ver, &hdr, &cnt, &len, &info1); if (!data) From d19528a9e4f220519c2cb3f56ef0c84ead3ee440 Mon Sep 17 00:00:00 2001 From: Aleksi Torhamo Date: Fri, 4 Jan 2013 18:39:13 +0200 Subject: [PATCH 322/553] drm/nouveau/clock: fix support for more than 2 monitors on nve0 Fixes regression introduced in commit 70790f4f "drm/nouveau/clock: pull in the implementation from all over the place" When code was moved from nv50_crtc_set_clock to nvc0_clock_pll_set, the PLLs it is used for got limited to only the first two VPLLs. nv50_crtc_set_clock was only called to change VPLLs, so it didn't limit what it was used for in any way. Since nvc0_clock_pll_set is used for all PLLs, it has to specify which PLLs the code is used for, and only listed the first two VPLLs. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=58735 This patch is a -stable candidate for 3.7. Signed-off-by: Aleksi Torhamo Tested-by: Aleksi Torhamo Tested-by: Sean Santos Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/core/include/subdev/bios/pll.h | 2 ++ drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/gpu/drm/nouveau/core/include/subdev/bios/pll.h b/drivers/gpu/drm/nouveau/core/include/subdev/bios/pll.h index c345097592f2..b2f3d4d0aa49 100644 --- a/drivers/gpu/drm/nouveau/core/include/subdev/bios/pll.h +++ b/drivers/gpu/drm/nouveau/core/include/subdev/bios/pll.h @@ -38,6 +38,8 @@ enum nvbios_pll_type { PLL_UNK42 = 0x42, PLL_VPLL0 = 0x80, PLL_VPLL1 = 0x81, + PLL_VPLL2 = 0x82, + PLL_VPLL3 = 0x83, PLL_MAX = 0xff }; diff --git a/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c index f6962c9b6c36..7c9626258a46 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c @@ -52,6 +52,8 @@ nvc0_clock_pll_set(struct nouveau_clock *clk, u32 type, u32 freq) switch (info.type) { case PLL_VPLL0: case PLL_VPLL1: + case PLL_VPLL2: + case PLL_VPLL3: nv_mask(priv, info.reg + 0x0c, 0x00000000, 0x00000100); nv_wr32(priv, info.reg + 0x04, (P << 16) | (N << 8) | M); nv_wr32(priv, info.reg + 0x10, fN << 16); From 43f789792e2c7ea2bff37195e4c4b4239e9e02b7 Mon Sep 17 00:00:00 2001 From: Aleksi Torhamo Date: Wed, 9 Jan 2013 20:08:48 +0200 Subject: [PATCH 323/553] drm/nvc0/fb: fix crash when different mutex is used to protect same list Fixes regression introduced in commit 861d2107 "drm/nouveau/fb: merge fb/vram and port to subdev interfaces" nv50_fb_vram_{new,del} functions were changed to use nouveau_subdev->mutex instead of the old nouveau_mm->mutex. nvc0_fb_vram_new still uses the nouveau_mm->mutex, but nvc0 doesn't have its own fb_vram_del function, using nv50_fb_vram_del instead. Because of this, on nvc0 a different mutex ends up being used to protect additions and deletions to the same list. This patch is a -stable candidate for 3.7. Signed-off-by: Aleksi Torhamo Reported-by: Roy Spliet Tested-by: Roy Spliet Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c index 306bdf121452..7606ed15b6fa 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c @@ -145,14 +145,14 @@ nvc0_fb_vram_new(struct nouveau_fb *pfb, u64 size, u32 align, u32 ncmin, mem->memtype = type; mem->size = size; - mutex_lock(&mm->mutex); + mutex_lock(&pfb->base.mutex); do { if (back) ret = nouveau_mm_tail(mm, 1, size, ncmin, align, &r); else ret = nouveau_mm_head(mm, 1, size, ncmin, align, &r); if (ret) { - mutex_unlock(&mm->mutex); + mutex_unlock(&pfb->base.mutex); pfb->ram.put(pfb, &mem); return ret; } @@ -160,7 +160,7 @@ nvc0_fb_vram_new(struct nouveau_fb *pfb, u64 size, u32 align, u32 ncmin, list_add_tail(&r->rl_entry, &mem->regions); size -= r->length; } while (size); - mutex_unlock(&mm->mutex); + mutex_unlock(&pfb->base.mutex); r = list_first_entry(&mem->regions, struct nouveau_mm_node, rl_entry); mem->offset = (u64)r->offset << 12; From 8cf65dc386f3634a43312f436cc7a935476a40c4 Mon Sep 17 00:00:00 2001 From: Tomasz Mloduchowski Date: Sun, 13 Jan 2013 23:32:53 +0100 Subject: [PATCH 324/553] usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid added Simple fix to add support for Crucible Technologies COMET Caller ID USB decoder - a device containing FTDI USB/Serial converter chip, handling 1200bps CallerID messages decoded from the phone line - adding correct USB PID is sufficient. Tested to apply cleanly and work flawlessly against 3.6.9, 3.7.0-rc8 and 3.8.0-rc3 on both amd64 and x86 arches. Signed-off-by: Tomasz Mloduchowski Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 0a373b3ae96a..ba68835d06a6 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -875,6 +875,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) }, + /* Crucible Devices */ + { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 049b6e715fa4..fa5d56038276 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1259,3 +1259,9 @@ * ATI command output: Cinterion MC55i */ #define FTDI_CINTERION_MC55I_PID 0xA951 + +/* + * Product: Comet Caller ID decoder + * Manufacturer: Crucible Technologies + */ +#define FTDI_CT_COMET_PID 0x8e08 From c930812fe5ebe725760422c9c351d1f6fde1502d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 11 Jan 2013 12:08:56 +0100 Subject: [PATCH 325/553] udldrmfb: Fix EDID not working with monitors with EDID extension blocks udldrmfb only reads the main EDID block, and if that advertises extensions the drm_edid code expects them to be present, and starts reading beyond the buffer udldrmfb passes it. Although it may be possible to read more EDID info with the udl we simpy don't know how, and even if trial and error gets it working on one device, that is no guarantee it will work on other revisions. So this patch does a simple fix in the form of patching the EDID info to report 0 extension blocks, this fixes udldrmfb only doing 1024x768 on monitors with EDID extension blocks. Signed-off-by: Hans de Goede Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/udl/udl_connector.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/udl/udl_connector.c b/drivers/gpu/drm/udl/udl_connector.c index 512f44add89f..3e6208f773e2 100644 --- a/drivers/gpu/drm/udl/udl_connector.c +++ b/drivers/gpu/drm/udl/udl_connector.c @@ -57,6 +57,14 @@ static int udl_get_modes(struct drm_connector *connector) edid = (struct edid *)udl_get_edid(udl); + /* + * We only read the main block, but if the monitor reports extension + * blocks then the drm edid code expects them to be present, so patch + * the extension count to 0. + */ + edid->checksum += edid->extensions; + edid->extensions = 0; + drm_mode_connector_update_edid_property(connector, edid); ret = drm_add_edid_modes(connector, edid); kfree(edid); From 242187b362555849e8c971dfbbfd55f8bd9fa717 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 11 Jan 2013 12:08:57 +0100 Subject: [PATCH 326/553] udldrmfb: udl_get_edid: usb_control_msg buffer must not be on the stack The buffer passed to usb_control_msg may end up in scatter-gather list, and may thus not be on the stack. Having it on the stack usually works on x86, but not on other archs. Signed-off-by: Hans de Goede Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/udl/udl_connector.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/udl/udl_connector.c b/drivers/gpu/drm/udl/udl_connector.c index 3e6208f773e2..353bc1ea6f68 100644 --- a/drivers/gpu/drm/udl/udl_connector.c +++ b/drivers/gpu/drm/udl/udl_connector.c @@ -22,13 +22,17 @@ static u8 *udl_get_edid(struct udl_device *udl) { u8 *block; - char rbuf[3]; + char *rbuf; int ret, i; block = kmalloc(EDID_LENGTH, GFP_KERNEL); if (block == NULL) return NULL; + rbuf = kmalloc(2, GFP_KERNEL); + if (rbuf == NULL) + goto error; + for (i = 0; i < EDID_LENGTH; i++) { ret = usb_control_msg(udl->ddev->usbdev, usb_rcvctrlpipe(udl->ddev->usbdev, 0), (0x02), @@ -42,10 +46,12 @@ static u8 *udl_get_edid(struct udl_device *udl) block[i] = rbuf[1]; } + kfree(rbuf); return block; error: kfree(block); + kfree(rbuf); return NULL; } From 7b4cf994e4c6ba48872bb25253cc393b7fb74c82 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 11 Jan 2013 12:08:58 +0100 Subject: [PATCH 327/553] udldrmfb: udl_get_edid: drop unneeded i-- This is a left-over from when udl_get_edid returned the amount of bytes successfully read, which it no longer does. Signed-off-by: Hans de Goede Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/udl/udl_connector.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/udl/udl_connector.c b/drivers/gpu/drm/udl/udl_connector.c index 353bc1ea6f68..fe5cdbcf2636 100644 --- a/drivers/gpu/drm/udl/udl_connector.c +++ b/drivers/gpu/drm/udl/udl_connector.c @@ -40,7 +40,6 @@ static u8 *udl_get_edid(struct udl_device *udl) HZ); if (ret < 1) { DRM_ERROR("Read EDID byte %d failed err %x\n", i, ret); - i--; goto error; } block[i] = rbuf[1]; From a82b6af37d20bfe6e99a4d890f1cf1d89059929f Mon Sep 17 00:00:00 2001 From: Betty Dall Date: Sun, 13 Jan 2013 15:46:18 -0700 Subject: [PATCH 328/553] PCI/AER: pci_get_domain_bus_and_slot() call missing required pci_dev_put() The function aer_recover_queue() calls pci_get_domain_bus_and_slot(), which requires that the caller decrement the reference count with pci_dev_put(). This patch adds the missing call to pci_dev_put(). Signed-off-by: Betty Dall Signed-off-by: Bjorn Helgaas Reviewed-by: Shuah Khan CC: stable@vger.kernel.org --- drivers/pci/pcie/aer/aerdrv_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 421bbc5fee32..564d97f94b6c 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -630,6 +630,7 @@ static void aer_recover_work_func(struct work_struct *work) continue; } do_recovery(pdev, entry.severity); + pci_dev_put(pdev); } } #endif From 10959d72d401cec2781ca636b07d692c625e1c91 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 11 Jan 2013 15:30:52 -0700 Subject: [PATCH 329/553] PCI: shpchp: Make shpchp_wq non-ordered e24dcbef93 ("shpchp: update workqueue usage") was described as adding non-ordered shpchp_wq, but it actually made it an *ordered* workqueue. This patch changes shpchp_wq to be non-ordered, as described in the e24dcbef93 commit log and as was done for pciehp by a827ea307b ("pciehp: update workqueue usage"). Signed-off-by: Bjorn Helgaas Acked-by: Tejun Heo --- drivers/pci/hotplug/shpchp_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index b6de307248e4..59ca86c924a3 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -366,7 +366,7 @@ static int __init shpcd_init(void) { int retval = 0; - shpchp_wq = alloc_ordered_workqueue("shpchp", 0); + shpchp_wq = alloc_workqueue("shpchp", 0, 0); if (!shpchp_wq) return -ENOMEM; From 006e792ba5f60c59d8bc5ac5628c54e021e8580f Mon Sep 17 00:00:00 2001 From: Gwenhael Goavec-Merou Date: Sun, 13 Jan 2013 16:56:42 +0100 Subject: [PATCH 330/553] ARM: imx: platform-imx-fb: modifies platform device name Framebuffer platform device is now identified by a device id (imx1-fb or imx21-fb) instead of by driver name (imx-fb). Signed-off-by: Gwenhael Goavec-Merou Signed-off-by: Shawn Guo --- arch/arm/mach-imx/devices/platform-imx-fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c index 10b0ed39f07f..25a47c616b2d 100644 --- a/arch/arm/mach-imx/devices/platform-imx-fb.c +++ b/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb( .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device_dmamask("imx-fb", 0, + return imx_add_platform_device_dmamask(data->devid, 0, res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } From afc10301f70350b490ca518ceb793928854b5453 Mon Sep 17 00:00:00 2001 From: Gwenhael Goavec-Merou Date: Sun, 13 Jan 2013 16:56:43 +0100 Subject: [PATCH 331/553] video: imxfb: fix imxfb_info configuration order The devtype field for fbi (struct imxfb_info) must be set after memset call to avoid some wrong behaviour (pixel size). Signed-off-by: Gwenhael Goavec-Merou Signed-off-by: Shawn Guo --- drivers/video/imxfb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index e501dbc966b3..8435c5d601a1 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -729,6 +729,8 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev) memset(fbi, 0, sizeof(struct imxfb_info)); + fbi->devtype = pdev->id_entry->driver_data; + strlcpy(info->fix.id, IMX_NAME, sizeof(info->fix.id)); info->fix.type = FB_TYPE_PACKED_PIXELS; @@ -789,7 +791,6 @@ static int __init imxfb_probe(struct platform_device *pdev) return -ENOMEM; fbi = info->par; - fbi->devtype = pdev->id_entry->driver_data; if (!fb_mode) fb_mode = pdata->mode[0].mode.name; From ff9234ad4e974768455071c91bd76402e4af8a28 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sat, 12 Jan 2013 14:41:13 +0900 Subject: [PATCH 332/553] f2fs: remove redundant call to set_blocksize in f2fs_fill_super Since, f2fs supports only 4KB blocksize, which is set at the beginning in f2fs_fill_super. So, we do not need to again check this blocksize setting in such case. Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim --- fs/f2fs/super.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index 0f2b2eb86a05..ac127fde8e11 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -443,7 +443,7 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent) if (!sbi) return -ENOMEM; - /* set a temporary block size */ + /* set a block size */ if (!sb_set_blocksize(sb, F2FS_BLKSIZE)) { f2fs_msg(sb, KERN_ERR, "unable to set blocksize"); goto free_sbi; @@ -542,10 +542,6 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent) INIT_LIST_HEAD(&sbi->dir_inode_list); spin_lock_init(&sbi->dir_inode_lock); - /* init super block */ - if (!sb_set_blocksize(sb, sbi->blocksize)) - goto free_cp; - init_orphan_info(sbi); /* setup f2fs internal modules */ From 163799872b65b0cbf0091d82971233cc3d2425d3 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sat, 12 Jan 2013 14:41:33 +0900 Subject: [PATCH 333/553] f2fs: avoid redundant time update for parent directory in f2fs_delete_entry In call to f2fs_delete_entry, 'dir' time modification code is put at two places. So, remove the redundant code for timing update. Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim --- fs/f2fs/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/f2fs/dir.c b/fs/f2fs/dir.c index 951ed52748f6..989980e16d0b 100644 --- a/fs/f2fs/dir.c +++ b/fs/f2fs/dir.c @@ -503,7 +503,7 @@ void f2fs_delete_entry(struct f2fs_dir_entry *dentry, struct page *page, } if (inode) { - inode->i_ctime = dir->i_ctime = dir->i_mtime = CURRENT_TIME; + inode->i_ctime = CURRENT_TIME; drop_nlink(inode); if (S_ISDIR(inode->i_mode)) { drop_nlink(inode); From 397c60668aa5ae7130b5ad4e73870d7b8a787085 Mon Sep 17 00:00:00 2001 From: Nitin Gupta Date: Wed, 2 Jan 2013 08:53:41 -0800 Subject: [PATCH 334/553] staging: zram: fix invalid memory references during disk write Fixes a bug introduced by commit c8f2f0db1 ("zram: Fix handling of incompressible pages") which caused invalid memory references during disk write. Invalid references could occur in two cases: - Incoming data expands on compression: In this case, reference was made to kunmap()'ed bio page. - Partial (non PAGE_SIZE) write with incompressible data: In this case, reference was made to a kfree()'ed buffer. Fixes bug 50081: https://bugzilla.kernel.org/show_bug.cgi?id=50081 Signed-off-by: Nitin Gupta Cc: stable Reported-by: Mihail Kasadjikov Reported-by: Tomas M Reviewed-by: Minchan Kim Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zram/zram_drv.c | 39 ++++++++++++++++++++------------- 1 file changed, 24 insertions(+), 15 deletions(-) diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c index fb4a7c94aed3..f2a73bd739fb 100644 --- a/drivers/staging/zram/zram_drv.c +++ b/drivers/staging/zram/zram_drv.c @@ -265,7 +265,7 @@ out_cleanup: static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, int offset) { - int ret; + int ret = 0; size_t clen; unsigned long handle; struct page *page; @@ -286,10 +286,8 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, goto out; } ret = zram_decompress_page(zram, uncmem, index); - if (ret) { - kfree(uncmem); + if (ret) goto out; - } } /* @@ -302,16 +300,18 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, user_mem = kmap_atomic(page); - if (is_partial_io(bvec)) + if (is_partial_io(bvec)) { memcpy(uncmem + offset, user_mem + bvec->bv_offset, bvec->bv_len); - else + kunmap_atomic(user_mem); + user_mem = NULL; + } else { uncmem = user_mem; + } if (page_zero_filled(uncmem)) { - kunmap_atomic(user_mem); - if (is_partial_io(bvec)) - kfree(uncmem); + if (!is_partial_io(bvec)) + kunmap_atomic(user_mem); zram_stat_inc(&zram->stats.pages_zero); zram_set_flag(zram, index, ZRAM_ZERO); ret = 0; @@ -321,9 +321,11 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, ret = lzo1x_1_compress(uncmem, PAGE_SIZE, src, &clen, zram->compress_workmem); - kunmap_atomic(user_mem); - if (is_partial_io(bvec)) - kfree(uncmem); + if (!is_partial_io(bvec)) { + kunmap_atomic(user_mem); + user_mem = NULL; + uncmem = NULL; + } if (unlikely(ret != LZO_E_OK)) { pr_err("Compression failed! err=%d\n", ret); @@ -332,8 +334,10 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, if (unlikely(clen > max_zpage_size)) { zram_stat_inc(&zram->stats.bad_compress); - src = uncmem; clen = PAGE_SIZE; + src = NULL; + if (is_partial_io(bvec)) + src = uncmem; } handle = zs_malloc(zram->mem_pool, clen); @@ -345,7 +349,11 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, } cmem = zs_map_object(zram->mem_pool, handle, ZS_MM_WO); + if ((clen == PAGE_SIZE) && !is_partial_io(bvec)) + src = kmap_atomic(page); memcpy(cmem, src, clen); + if ((clen == PAGE_SIZE) && !is_partial_io(bvec)) + kunmap_atomic(src); zs_unmap_object(zram->mem_pool, handle); @@ -358,9 +366,10 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, if (clen <= PAGE_SIZE / 2) zram_stat_inc(&zram->stats.good_compress); - return 0; - out: + if (is_partial_io(bvec)) + kfree(uncmem); + if (ret) zram_stat64_inc(zram, &zram->stats.failed_writes); return ret; From ab3cd8670e0b3fcde7f029e1503ed3c5138e9571 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Sun, 13 Jan 2013 20:36:39 -0800 Subject: [PATCH 335/553] x86/Sandy Bridge: mark arrays in __init functions as __initconst Mark static arrays as __initconst so they get removed when the init sections are flushed. Reported-by: Mathias Krause Link: http://lkml.kernel.org/r/75F4BEE6-CB0E-4426-B40B-697451677738@googlemail.com Signed-off-by: H. Peter Anvin --- arch/x86/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 9dcb32545032..18182d19b71b 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -614,7 +614,7 @@ static bool __init snb_gfx_workaround_needed(void) { int i; u16 vendor, devid; - static const u16 snb_ids[] = { + static const __initconst u16 snb_ids[] = { 0x0102, 0x0112, 0x0122, @@ -646,7 +646,7 @@ static bool __init snb_gfx_workaround_needed(void) */ static void __init trim_snb_memory(void) { - static const unsigned long bad_pages[] = { + static const __initconst unsigned long bad_pages[] = { 0x20050000, 0x20110000, 0x20130000, From e43b3cec711a61edf047adf6204d542f3a659ef8 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Sun, 13 Jan 2013 20:56:41 -0800 Subject: [PATCH 336/553] x86/Sandy Bridge: Sandy Bridge workaround depends on CONFIG_PCI early_pci_allowed() and read_pci_config_16() are only available if CONFIG_PCI is defined. Signed-off-by: H. Peter Anvin Cc: Jesse Barnes --- arch/x86/kernel/setup.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 18182d19b71b..00f6c1472b85 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -612,6 +612,7 @@ static unsigned reserve_low = CONFIG_X86_RESERVE_LOW << 10; static bool __init snb_gfx_workaround_needed(void) { +#ifdef CONFIG_PCI int i; u16 vendor, devid; static const __initconst u16 snb_ids[] = { @@ -636,6 +637,7 @@ static bool __init snb_gfx_workaround_needed(void) for (i = 0; i < ARRAY_SIZE(snb_ids); i++) if (devid == snb_ids[i]) return true; +#endif return false; } From a246f581fceb2d6c83a74364f4a4c6263e6cdfe4 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 14 Jan 2013 17:59:03 +0900 Subject: [PATCH 337/553] sh: wire up finit_module syscall. Signed-off-by: Paul Mundt --- arch/sh/include/uapi/asm/unistd_32.h | 3 ++- arch/sh/include/uapi/asm/unistd_64.h | 3 ++- arch/sh/kernel/syscalls_32.S | 1 + arch/sh/kernel/syscalls_64.S | 1 + 4 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/sh/include/uapi/asm/unistd_32.h b/arch/sh/include/uapi/asm/unistd_32.h index 9e465f246dc1..d13a1d623736 100644 --- a/arch/sh/include/uapi/asm/unistd_32.h +++ b/arch/sh/include/uapi/asm/unistd_32.h @@ -379,7 +379,8 @@ #define __NR_process_vm_readv 365 #define __NR_process_vm_writev 366 #define __NR_kcmp 367 +#define __NR_finit_module 368 -#define NR_syscalls 368 +#define NR_syscalls 369 #endif /* __ASM_SH_UNISTD_32_H */ diff --git a/arch/sh/include/uapi/asm/unistd_64.h b/arch/sh/include/uapi/asm/unistd_64.h index 8e3a2edd284e..e6820c86e8c7 100644 --- a/arch/sh/include/uapi/asm/unistd_64.h +++ b/arch/sh/include/uapi/asm/unistd_64.h @@ -399,7 +399,8 @@ #define __NR_process_vm_readv 376 #define __NR_process_vm_writev 377 #define __NR_kcmp 378 +#define __NR_finit_module 379 -#define NR_syscalls 379 +#define NR_syscalls 380 #endif /* __ASM_SH_UNISTD_64_H */ diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index fe97ae5e56f1..734234be2f01 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -385,3 +385,4 @@ ENTRY(sys_call_table) .long sys_process_vm_readv /* 365 */ .long sys_process_vm_writev .long sys_kcmp + .long sys_finit_module diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index 5c7b1c67bdc1..579fcb9a896b 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -405,3 +405,4 @@ sys_call_table: .long sys_process_vm_readv .long sys_process_vm_writev .long sys_kcmp + .long sys_finit_module From b98ae2729dea161edc96c9d177459b6c28bcbba5 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 4 Jan 2013 17:02:18 +0100 Subject: [PATCH 338/553] ALSA: usb - fix race in creation of M-Audio Fast track pro driver A patch in the 3.2 kernel caused regression with hotplugging the M-Audio Fast track pro, or sound after suspend. I don't have the device so I haven't done a full analysis, but it seems userspace (both udev and pulseaudio) got confused when a card was created, immediately destroyed, and then created again. However, at least one person in the bug report (martin djfun) reports that this patch resolves the issue for him. It also leaves a message in the log: "snd-usb-audio: probe of 1-1.1:1.1 failed with error -5" which is a bit misleading. It is better than non-working audio, but maybe there's a more elegant solution? BugLink: https://bugs.launchpad.net/bugs/1095315 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index acc12f004c23..e71fc8bc3a70 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -387,11 +387,13 @@ static int snd_usb_fasttrackpro_boot_quirk(struct usb_device *dev) * rules */ err = usb_driver_set_configuration(dev, 2); - if (err < 0) { + if (err < 0) snd_printdd("error usb_driver_set_configuration: %d\n", err); - return -ENODEV; - } + /* Always return an error, so that we stop creating a device + that will just be destroyed and recreated with a new + configuration */ + return -ENODEV; } else snd_printk(KERN_INFO "usb-audio: Fast Track Pro config OK\n"); From 2aad272b3f458564f2d505465c88fcde37017ba0 Mon Sep 17 00:00:00 2001 From: Eldad Zack Date: Sun, 13 Jan 2013 23:02:02 +0100 Subject: [PATCH 339/553] ALSA: usb-audio: correct M-Audio C400 clock source quirk Taking another look at the C400 descriptors, I see now that there is a clock selector (0x80) for this device. Right now, the clock source points to the internal clock (0x81), which is also valid. When the external clock source (0x82) is selected in the mixer, and the rates mismatch (if it's free-running it is fixed to 48KHz), xruns will occur. Set the clock ID to the clock selector unit (0x81), which then allows the validation code to function correctly. Signed-off-by: Eldad Zack Signed-off-by: Takashi Iwai --- sound/usb/quirks-table.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 78e845ec65da..64d25a7a4d59 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -2289,7 +2289,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .rate_table = (unsigned int[]) { 44100, 48000, 88200, 96000 }, - .clock = 0x81, + .clock = 0x80, } }, /* Capture */ @@ -2315,7 +2315,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .rate_table = (unsigned int[]) { 44100, 48000, 88200, 96000 }, - .clock = 0x81, + .clock = 0x80, } }, /* MIDI */ From 83e3acd494f47dc5dababfe6156c6178aca5c3a9 Mon Sep 17 00:00:00 2001 From: Eldad Zack Date: Sun, 13 Jan 2013 23:02:03 +0100 Subject: [PATCH 340/553] ALSA: usb-audio: M-Audio FT C400 skip packet quirk Attain constant real-world latency by skipping 16 data packets. The number of packets to be skipped was found by trial and error. Signed-off-by: Eldad Zack Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index e71fc8bc3a70..2c971858d6b7 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -861,6 +861,17 @@ void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep) if ((le16_to_cpu(ep->chip->dev->descriptor.idVendor) == 0x23ba) && ep->type == SND_USB_ENDPOINT_TYPE_SYNC) ep->skip_packets = 4; + + /* + * M-Audio Fast Track C400 - when packets are not skipped, real world + * latency varies by approx. +/- 50 frames (at 96KHz) each time the + * stream is (re)started. When skipping packets 16 at endpoint start + * up, the real world latency is stable within +/- 1 frame (also + * across power cycles). + */ + if (ep->chip->usb_id == USB_ID(0x0763, 0x2030) && + ep->type == SND_USB_ENDPOINT_TYPE_DATA) + ep->skip_packets = 16; } void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe, From 39e95156b9c778de37f5bf72e50fbdbbbdfb7630 Mon Sep 17 00:00:00 2001 From: Eldad Zack Date: Sun, 13 Jan 2013 23:02:04 +0100 Subject: [PATCH 341/553] ALSA: usb-audio: selector map for M-Audio FT C400 Add names of the clock sources for the M-Audio Fast Track C400. Signed-off-by: Eldad Zack Signed-off-by: Takashi Iwai --- sound/usb/mixer_maps.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c index e71fe55cebef..0e2ed3d05c45 100644 --- a/sound/usb/mixer_maps.c +++ b/sound/usb/mixer_maps.c @@ -179,6 +179,15 @@ static struct usbmix_name_map audigy2nx_map[] = { { 0 } /* terminator */ }; +static struct usbmix_selector_map c400_selectors[] = { + { + .id = 0x80, + .count = 2, + .names = (const char*[]) {"Internal", "SPDIF"} + }, + { 0 } /* terminator */ +}; + static struct usbmix_selector_map audigy2nx_selectors[] = { { .id = 14, /* Capture Source */ @@ -366,6 +375,10 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = { .id = USB_ID(0x06f8, 0xc000), .map = hercules_usb51_map, }, + { + .id = USB_ID(0x0763, 0x2030), + .selector_map = c400_selectors, + }, { .id = USB_ID(0x08bb, 0x2702), .map = linex_map, From 14eae6e9d455a7848a5e45ff193a14925478f6ab Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 14 Jan 2013 18:07:36 +0900 Subject: [PATCH 342/553] sh: Fix up stack debugging build. Somewhere along the line the ebss label was taken out, resulting in pcrel branch too far errors. Restore the label to get things building again. Signed-off-by: Paul Mundt --- arch/sh/lib/mcount.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S index 60164e65d665..52aa2011d753 100644 --- a/arch/sh/lib/mcount.S +++ b/arch/sh/lib/mcount.S @@ -294,6 +294,8 @@ stack_panic: .align 2 .L_init_thread_union: .long init_thread_union +.L_ebss: + .long __bss_stop .Lpanic: .long panic .Lpanic_s: From d0b6a548f7fc9af9cc0bdea5bcc66bec3581ec37 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 28 Dec 2012 17:42:47 -0700 Subject: [PATCH 343/553] arm64: dts: prevent *.dtb from always being rebuilt if_changed (used by the *.dts->*.dtc rule) rebuilds files if they aren't contained in $(targets). (make V=2 indicates this). Add $(dtb-y) to $(targets) to prevent *.dtb from always being rebuilt. Note This fixes a regression introduced by the .dtb rule rework in da4cbc6 "arm64: use new common dtc rule", although since arm64 doesn't actually have any *.dts yet, this isn't a critical issue. Signed-off-by: Stephen Warren Signed-off-by: Rob Herring --- arch/arm64/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 801e2d7fcbc6..32ac0aef0068 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -1,4 +1,5 @@ targets += dtbs +targets += $(dtb-y) dtbs: $(addprefix $(obj)/, $(dtb-y)) From 1ab3681271c84b7f926be9ae3be1d769b7e933e9 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 28 Dec 2012 17:42:46 -0700 Subject: [PATCH 344/553] ARM: dts: prevent *.dtb from always being rebuilt if_changed (used by the *.dts->*.dtc rule) rebuilds files if they aren't contained in $(targets). (make V=2 indicates this). Add $(dtb-y) to $(targets) to prevent *.dtb from always being rebuilt. This fixes a regression introduced by the .dtb rule rework in 499cd82 "ARM: dt: change .dtb build rules to build in dts directory". Reported-by: Shawn Guo Signed-off-by: Stephen Warren Signed-off-by: Rob Herring --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e44da40d984f..5ebb44fe826a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -155,6 +155,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb targets += dtbs +targets += $(dtb-y) endif # *.dtb used to be generated in the directory above. Clean out the From 837576642167d701f983e4def0d3936b514a28ae Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 14 Jan 2013 14:08:50 +0800 Subject: [PATCH 345/553] ARM: imx: disable cpu in .cpu_kill hook It's buggy to disable the cpu that is being hot-unplugged in .cpu_die hook which runs on the cpu itself. Instead, it should be done in .cpu_kill which runs on the thread (another cpu) that asks for shutting down the cpu. Move imx_enable_cpu(cpu, false) call into .cpu_kill hook, and leave the cpu to be hot-unplugged in WFI within .cpu_die, so that we can get a more stable cpu hot-plug operation. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/common.h | 1 + arch/arm/mach-imx/hotplug.c | 12 +++++++----- arch/arm/mach-imx/platsmp.c | 1 + 3 files changed, 9 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 7191ab4434e5..fa36fb84ab19 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -142,6 +142,7 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); extern void imx6q_clock_map_io(void); extern void imx_cpu_die(unsigned int cpu); +extern int imx_cpu_kill(unsigned int cpu); #ifdef CONFIG_PM extern void imx6q_pm_init(void); diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 3dec962b0770..7bc5fe15dda2 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -46,9 +46,11 @@ static inline void cpu_enter_lowpower(void) void imx_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); - imx_enable_cpu(cpu, false); - - /* spin here until hardware takes it down */ - while (1) - ; + cpu_do_idle(); +} + +int imx_cpu_kill(unsigned int cpu) +{ + imx_enable_cpu(cpu, false); + return 1; } diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 3777b805b76b..66fae885c842 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -92,5 +92,6 @@ struct smp_operations imx_smp_ops __initdata = { .smp_boot_secondary = imx_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = imx_cpu_die, + .cpu_kill = imx_cpu_kill, #endif }; From 83ae20981ae924c37d02a42c829155fc3851260c Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 14 Jan 2013 21:11:10 +0800 Subject: [PATCH 346/553] ARM: imx: correct low-power mode setting The hardware reset value of bit CCM_CLPCR_LPM enables WAIT mode (WAIT_UNCLOCKED) by default. However this is undesirable because WAIT mode should only be enabled when there is a driver managing ARM clock gating. Correct the initial power mode to WAIT_CLOCKED (disable WAIT mode). While at it, the power mode after resuming is also set back to WAIT_CLOCKED from STOP_POWER_OFF. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 3 +++ arch/arm/mach-imx/pm-imx6q.c | 1 + 2 files changed, 4 insertions(+) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 7f2c10c7413a..c0c4e723b7f5 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void) for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clk[clks_init_on[i]]); + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index a17543da602d..ee42d20cba19 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -41,6 +41,7 @@ static int imx6q_pm_enter(suspend_state_t state) cpu_suspend(0, imx6q_suspend_finish); imx_smp_prepare(); imx_gpc_post_resume(); + imx6q_set_lpm(WAIT_CLOCKED); break; default: return -EINVAL; From d347e75847c1fb299c97736638f45e6ea39702d4 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 11 Jan 2013 12:07:22 -0700 Subject: [PATCH 347/553] PCI: shpchp: Handle push button event asynchronously Use non-ordered workqueue for attention button events. Attention button events on each slot can be handled asynchronously. So we should use non-ordered workqueue. This patch also removes ordered workqueue in shpchp as a result. 486b10b9f4 ("PCI: pciehp: Handle push button event asynchronously") made the same change to pciehp. I split this out from a patch by Yijing Wang so we fix one thing at a time and to make the shpchp history correspond more closely with the pciehp history. Signed-off-by: Bjorn Helgaas CC: Kenji Kaneshige --- drivers/pci/hotplug/shpchp.h | 1 - drivers/pci/hotplug/shpchp_core.c | 10 ---------- drivers/pci/hotplug/shpchp_ctrl.c | 2 +- 3 files changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index ca64932e658b..1b69d955a31f 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -47,7 +47,6 @@ extern bool shpchp_poll_mode; extern int shpchp_poll_time; extern bool shpchp_debug; extern struct workqueue_struct *shpchp_wq; -extern struct workqueue_struct *shpchp_ordered_wq; #define dbg(format, arg...) \ do { \ diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 59ca86c924a3..3774e0d5506e 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -40,7 +40,6 @@ bool shpchp_debug; bool shpchp_poll_mode; int shpchp_poll_time; struct workqueue_struct *shpchp_wq; -struct workqueue_struct *shpchp_ordered_wq; #define DRIVER_VERSION "0.4" #define DRIVER_AUTHOR "Dan Zink , Greg Kroah-Hartman , Dely Sy " @@ -181,7 +180,6 @@ void cleanup_slots(struct controller *ctrl) list_del(&slot->slot_list); cancel_delayed_work(&slot->work); flush_workqueue(shpchp_wq); - flush_workqueue(shpchp_ordered_wq); pci_hp_deregister(slot->hotplug_slot); } } @@ -370,17 +368,10 @@ static int __init shpcd_init(void) if (!shpchp_wq) return -ENOMEM; - shpchp_ordered_wq = alloc_ordered_workqueue("shpchp_ordered", 0); - if (!shpchp_ordered_wq) { - destroy_workqueue(shpchp_wq); - return -ENOMEM; - } - retval = pci_register_driver(&shpc_driver); dbg("%s: pci_register_driver = %d\n", __func__, retval); info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); if (retval) { - destroy_workqueue(shpchp_ordered_wq); destroy_workqueue(shpchp_wq); } return retval; @@ -390,7 +381,6 @@ static void __exit shpcd_cleanup(void) { dbg("unload_shpchpd()\n"); pci_unregister_driver(&shpc_driver); - destroy_workqueue(shpchp_ordered_wq); destroy_workqueue(shpchp_wq); info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n"); } diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index f9b5a52e4115..fd2cae9eb6c2 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -453,7 +453,7 @@ void shpchp_queue_pushbutton_work(struct work_struct *work) kfree(info); goto out; } - queue_work(shpchp_ordered_wq, &info->work); + queue_work(shpchp_wq, &info->work); out: mutex_unlock(&p_slot->lock); } From f652e7d2916fe2fcf9e7d709aa5b7476b431e2dd Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 11 Jan 2013 12:21:15 -0700 Subject: [PATCH 348/553] PCI: shpchp: Use per-slot workqueues to avoid deadlock When we have an SHPC-capable bridge with a second SHPC-capable bridge below it, pushing the upstream bridge's attention button causes a deadlock. The deadlock happens because we use the shpchp_wq workqueue to run shpchp_pushbutton_thread(), which uses shpchp_disable_slot() to remove devices below the upstream bridge. When we remove the downstream bridge, we call shpc_remove(), the shpchp driver's .remove() method. That calls flush_workqueue(shpchp_wq), which deadlocks because the shpchp_pushbutton_thread() work item is still running. This patch avoids the deadlock by creating a workqueue for every slot and removing the single shared workqueue. Here's the call path that leads to the deadlock: shpchp_queue_pushbutton_work queue_work(shpchp_wq) # shpchp_pushbutton_thread ... shpchp_pushbutton_thread shpchp_disable_slot remove_board shpchp_unconfigure_device pci_stop_and_remove_bus_device ... shpc_remove # shpchp driver .remove method hpc_release_ctlr cleanup_slots flush_workqueue(shpchp_wq) This change is based on code inspection, since we don't have hardware with this topology. Based-on-patch-by: Yijing Wang Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org --- drivers/pci/hotplug/shpchp.h | 2 +- drivers/pci/hotplug/shpchp_core.c | 26 ++++++++++++++------------ drivers/pci/hotplug/shpchp_ctrl.c | 6 +++--- 3 files changed, 18 insertions(+), 16 deletions(-) diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 1b69d955a31f..b849f995075a 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -46,7 +46,6 @@ extern bool shpchp_poll_mode; extern int shpchp_poll_time; extern bool shpchp_debug; -extern struct workqueue_struct *shpchp_wq; #define dbg(format, arg...) \ do { \ @@ -90,6 +89,7 @@ struct slot { struct list_head slot_list; struct delayed_work work; /* work for button event */ struct mutex lock; + struct workqueue_struct *wq; u8 hp_slot; }; diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 3774e0d5506e..3100c52c837c 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -39,7 +39,6 @@ bool shpchp_debug; bool shpchp_poll_mode; int shpchp_poll_time; -struct workqueue_struct *shpchp_wq; #define DRIVER_VERSION "0.4" #define DRIVER_AUTHOR "Dan Zink , Greg Kroah-Hartman , Dely Sy " @@ -128,6 +127,14 @@ static int init_slots(struct controller *ctrl) slot->device = ctrl->slot_device_offset + i; slot->hpc_ops = ctrl->hpc_ops; slot->number = ctrl->first_slot + (ctrl->slot_num_inc * i); + + snprintf(name, sizeof(name), "shpchp-%d", slot->number); + slot->wq = alloc_workqueue(name, 0, 0); + if (!slot->wq) { + retval = -ENOMEM; + goto error_info; + } + mutex_init(&slot->lock); INIT_DELAYED_WORK(&slot->work, shpchp_queue_pushbutton_work); @@ -147,7 +154,7 @@ static int init_slots(struct controller *ctrl) if (retval) { ctrl_err(ctrl, "pci_hp_register failed with error %d\n", retval); - goto error_info; + goto error_slotwq; } get_power_status(hotplug_slot, &info->power_status); @@ -159,6 +166,8 @@ static int init_slots(struct controller *ctrl) } return 0; +error_slotwq: + destroy_workqueue(slot->wq); error_info: kfree(info); error_hpslot: @@ -179,7 +188,7 @@ void cleanup_slots(struct controller *ctrl) slot = list_entry(tmp, struct slot, slot_list); list_del(&slot->slot_list); cancel_delayed_work(&slot->work); - flush_workqueue(shpchp_wq); + destroy_workqueue(slot->wq); pci_hp_deregister(slot->hotplug_slot); } } @@ -362,18 +371,12 @@ static struct pci_driver shpc_driver = { static int __init shpcd_init(void) { - int retval = 0; - - shpchp_wq = alloc_workqueue("shpchp", 0, 0); - if (!shpchp_wq) - return -ENOMEM; + int retval; retval = pci_register_driver(&shpc_driver); dbg("%s: pci_register_driver = %d\n", __func__, retval); info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); - if (retval) { - destroy_workqueue(shpchp_wq); - } + return retval; } @@ -381,7 +384,6 @@ static void __exit shpcd_cleanup(void) { dbg("unload_shpchpd()\n"); pci_unregister_driver(&shpc_driver); - destroy_workqueue(shpchp_wq); info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n"); } diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index fd2cae9eb6c2..58499277903a 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -51,7 +51,7 @@ static int queue_interrupt_event(struct slot *p_slot, u32 event_type) info->p_slot = p_slot; INIT_WORK(&info->work, interrupt_event_handler); - queue_work(shpchp_wq, &info->work); + queue_work(p_slot->wq, &info->work); return 0; } @@ -453,7 +453,7 @@ void shpchp_queue_pushbutton_work(struct work_struct *work) kfree(info); goto out; } - queue_work(shpchp_wq, &info->work); + queue_work(p_slot->wq, &info->work); out: mutex_unlock(&p_slot->lock); } @@ -501,7 +501,7 @@ static void handle_button_press_event(struct slot *p_slot) p_slot->hpc_ops->green_led_blink(p_slot); p_slot->hpc_ops->set_attention_status(p_slot, 0); - queue_delayed_work(shpchp_wq, &p_slot->work, 5*HZ); + queue_delayed_work(p_slot->wq, &p_slot->work, 5*HZ); break; case BLINKINGOFF_STATE: case BLINKINGON_STATE: From 1eaca39a84170b369fe61fb1da3c1e8606859e99 Mon Sep 17 00:00:00 2001 From: Bian Yu Date: Wed, 12 Dec 2012 22:26:58 -0500 Subject: [PATCH 349/553] [libata] ahci: Fix lack of command retry after a success error handler. It should be a mistake introduced by commit 8d899e70c1b3afff. qc->flags can't be set AC_ERR_* Signed-off-by: Bian Yu Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index bf039b0e97b7..bcf4437214f5 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2094,7 +2094,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, */ static inline int ata_eh_worth_retry(struct ata_queued_cmd *qc) { - if (qc->flags & AC_ERR_MEDIA) + if (qc->err_mask & AC_ERR_MEDIA) return 0; /* don't retry media errors */ if (qc->flags & ATA_QCFLAG_IO) return 1; /* otherwise retry anything from fs stack */ From 250bfd3d8e7e19cb649dd94689f0af2ce3474060 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Mon, 14 Jan 2013 10:54:11 +0800 Subject: [PATCH 350/553] tracing: Fix regression of trace_pipe Commit 0fb9656d "tracing: Make tracing_enabled be equal to tracing_on" changes the behaviour of trace_pipe, ie. it makes trace_pipe return if we've read something and tracing is enabled, and this means that we have to 'cat trace_pipe' again and again while running tests. IMO the right way is if tracing is enabled, we always block and wait for ring buffer, or we may lose what we want since ring buffer's size is limited. Link: http://lkml.kernel.org/r/1358132051-5410-1-git-send-email-bo.li.liu@oracle.com Signed-off-by: Liu Bo Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index f3ec1cfb0de1..3c13e46d7d24 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3454,7 +3454,7 @@ static int tracing_wait_pipe(struct file *filp) return -EINTR; /* - * We block until we read something and tracing is enabled. + * We block until we read something and tracing is disabled. * We still block if tracing is disabled, but we have never * read anything. This allows a user to cat this file, and * then enable tracing. But after we have read something, @@ -3462,7 +3462,7 @@ static int tracing_wait_pipe(struct file *filp) * * iter->pos will be 0 if we haven't read anything. */ - if (tracing_is_enabled() && iter->pos) + if (!tracing_is_enabled() && iter->pos) break; } From 7f9c9f8e24590e7dcd26ca408458c43df5b83e61 Mon Sep 17 00:00:00 2001 From: Hugh Daschbach Date: Fri, 4 Jan 2013 14:39:09 -0800 Subject: [PATCH 351/553] [libata] ahci: Add support for Enmotus Bobcat device. Silicon does not support standard AHCI BAR assignment. Add vendor/device exception to force BAR 2. Signed-off-by: Hugh Daschbach Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 7862d17976b7..497912732566 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -53,6 +53,7 @@ enum { AHCI_PCI_BAR_STA2X11 = 0, + AHCI_PCI_BAR_ENMOTUS = 2, AHCI_PCI_BAR_STANDARD = 5, }; @@ -410,6 +411,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */ { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */ + /* Enmotus */ + { PCI_DEVICE(0x1c44, 0x8000), board_ahci }, + /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, @@ -1098,9 +1102,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev_info(&pdev->dev, "PDC42819 can only drive SATA devices with this driver\n"); - /* The Connext uses non-standard BAR */ + /* Both Connext and Enmotus devices use non-standard BARs */ if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06) ahci_pci_bar = AHCI_PCI_BAR_STA2X11; + else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000) + ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS; /* acquire resources */ rc = pcim_enable_device(pdev); From 803739d25c2343da6d2f95eebdcbc08bf67097d4 Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Mon, 17 Dec 2012 23:18:59 +0800 Subject: [PATCH 352/553] [libata] replace sata_settings with devslp_timing NCQ capability was used to check availability of SATA Settings page from Identify Device Data Log, which contains DevSlp timing variables. It does not work on some HDDs and leads to error messages. IDENTIFY word 78 bit 5(Hardware Feature Control) can't work either because it is only the sufficient condition of Identify Device data log, not the necessary condition. This patch replaced ata_device->sata_settings with ->devslp_timing to only save DevSlp timing variables(8 bytes), instead of the whole SATA Settings page(512 bytes). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=51881 Reported-by: Borislav Petkov Signed-off-by: Shane Huang Cc: stable@vger.kernel.org Signed-off-by: Jeff Garzik --- drivers/ata/libahci.c | 6 +++--- drivers/ata/libata-core.c | 22 +++++++++++++--------- include/linux/ata.h | 8 +++++--- include/linux/libata.h | 4 ++-- 4 files changed, 23 insertions(+), 17 deletions(-) diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 320712a7b9ea..6cd7805e47ca 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1951,13 +1951,13 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep) /* Use the nominal value 10 ms if the read MDAT is zero, * the nominal value of DETO is 20 ms. */ - if (dev->sata_settings[ATA_LOG_DEVSLP_VALID] & + if (dev->devslp_timing[ATA_LOG_DEVSLP_VALID] & ATA_LOG_DEVSLP_VALID_MASK) { - mdat = dev->sata_settings[ATA_LOG_DEVSLP_MDAT] & + mdat = dev->devslp_timing[ATA_LOG_DEVSLP_MDAT] & ATA_LOG_DEVSLP_MDAT_MASK; if (!mdat) mdat = 10; - deto = dev->sata_settings[ATA_LOG_DEVSLP_DETO]; + deto = dev->devslp_timing[ATA_LOG_DEVSLP_DETO]; if (!deto) deto = 20; } else { diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 9e8b99af400d..46cd3f4c6aaa 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2325,24 +2325,28 @@ int ata_dev_configure(struct ata_device *dev) } } - /* check and mark DevSlp capability */ - if (ata_id_has_devslp(dev->id)) - dev->flags |= ATA_DFLAG_DEVSLP; - - /* Obtain SATA Settings page from Identify Device Data Log, - * which contains DevSlp timing variables etc. - * Exclude old devices with ata_id_has_ncq() + /* Check and mark DevSlp capability. Get DevSlp timing variables + * from SATA Settings page of Identify Device Data Log. */ - if (ata_id_has_ncq(dev->id)) { + if (ata_id_has_devslp(dev->id)) { + u8 sata_setting[ATA_SECT_SIZE]; + int i, j; + + dev->flags |= ATA_DFLAG_DEVSLP; err_mask = ata_read_log_page(dev, ATA_LOG_SATA_ID_DEV_DATA, ATA_LOG_SATA_SETTINGS, - dev->sata_settings, + sata_setting, 1); if (err_mask) ata_dev_dbg(dev, "failed to get Identify Device Data, Emask 0x%x\n", err_mask); + else + for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) { + j = ATA_LOG_DEVSLP_OFFSET + i; + dev->devslp_timing[i] = sata_setting[j]; + } } dev->cdb_len = 16; diff --git a/include/linux/ata.h b/include/linux/ata.h index 408da9502177..8f7a3d68371a 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -297,10 +297,12 @@ enum { ATA_LOG_SATA_NCQ = 0x10, ATA_LOG_SATA_ID_DEV_DATA = 0x30, ATA_LOG_SATA_SETTINGS = 0x08, - ATA_LOG_DEVSLP_MDAT = 0x30, + ATA_LOG_DEVSLP_OFFSET = 0x30, + ATA_LOG_DEVSLP_SIZE = 0x08, + ATA_LOG_DEVSLP_MDAT = 0x00, ATA_LOG_DEVSLP_MDAT_MASK = 0x1F, - ATA_LOG_DEVSLP_DETO = 0x31, - ATA_LOG_DEVSLP_VALID = 0x37, + ATA_LOG_DEVSLP_DETO = 0x01, + ATA_LOG_DEVSLP_VALID = 0x07, ATA_LOG_DEVSLP_VALID_MASK = 0x80, /* READ/WRITE LONG (obsolete) */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 83ba0ab2c915..649e5f86b5f0 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -652,8 +652,8 @@ struct ata_device { u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */ }; - /* Identify Device Data Log (30h), SATA Settings (page 08h) */ - u8 sata_settings[ATA_SECT_SIZE]; + /* DEVSLP Timing Variables from Identify Device Data Log */ + u8 devslp_timing[ATA_LOG_DEVSLP_SIZE]; /* error history */ int spdn_cnt; From cfa7a9ccda711ac6ab8f0d17c3a9b540092d305a Mon Sep 17 00:00:00 2001 From: Tsutomu Itoh Date: Mon, 17 Dec 2012 06:38:51 +0000 Subject: [PATCH 353/553] Btrfs: fix memory leak in name_cache_insert() We should free name_cache_entry before returning from the error handling code. Signed-off-by: Tsutomu Itoh --- fs/btrfs/send.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c index 54454542ad40..321b7fb4e441 100644 --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -1814,8 +1814,10 @@ static int name_cache_insert(struct send_ctx *sctx, (unsigned long)nce->ino); if (!nce_head) { nce_head = kmalloc(sizeof(*nce_head), GFP_NOFS); - if (!nce_head) + if (!nce_head) { + kfree(nce); return -ENOMEM; + } INIT_LIST_HEAD(nce_head); ret = radix_tree_insert(&sctx->name_cache, nce->ino, nce_head); From cc975eb4605c5765a5d5e7a51d24ba5a1cda269e Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Fri, 7 Dec 2012 10:09:19 +0000 Subject: [PATCH 354/553] btrfs: get the device in write mode when deleting it When we're deleting the device we should get it in write mode since we're going to re-write the super block magic on that device. And it should fail if the device is read-only. Signed-off-by: Lukas Czerner --- fs/btrfs/volumes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 5cce6aa74012..86279c37de64 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1431,7 +1431,7 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) } } else { ret = btrfs_get_bdev_and_sb(device_path, - FMODE_READ | FMODE_EXCL, + FMODE_WRITE | FMODE_EXCL, root->fs_info->bdev_holder, 0, &bdev, &bh); if (ret) From d86e56cf7d3669dd292012ac82b986bd1573b6cc Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Thu, 15 Nov 2012 11:35:41 +0000 Subject: [PATCH 355/553] Btrfs: disable qgroup id 0 Qgroup id 0 is a special number, we should set the id of a qgroup to 0. Fix it. Signed-off-by: Miao Xie --- fs/btrfs/ioctl.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 7624212ae926..dd8e3448fe8f 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3698,6 +3698,11 @@ static long btrfs_ioctl_qgroup_create(struct file *file, void __user *arg) goto drop_write; } + if (!sa->qgroupid) { + ret = -EINVAL; + goto out; + } + trans = btrfs_join_transaction(root); if (IS_ERR(trans)) { ret = PTR_ERR(trans); From 5c39da5b6ca23e68e7acea7f4c01470383475214 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Mon, 22 Oct 2012 11:39:53 +0000 Subject: [PATCH 356/553] Btrfs: do not delete a subvolume which is in a R/O subvolume Step to reproduce: # mkfs.btrfs # mount # btrfs sub create /subv0 # btrfs sub snap /subv0/snap0 # change /subv0 from R/W to R/O # btrfs sub del /subv0/snap0 We deleted the snapshot successfully. I think we should not be able to delete the snapshot since the parent subvolume is R/O. Signed-off-by: Miao Xie --- fs/btrfs/ioctl.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index dd8e3448fe8f..5a72896bd769 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2095,13 +2095,13 @@ static noinline int btrfs_ioctl_snap_destroy(struct file *file, err = inode_permission(inode, MAY_WRITE | MAY_EXEC); if (err) goto out_dput; - - /* check if subvolume may be deleted by a non-root user */ - err = btrfs_may_delete(dir, dentry, 1); - if (err) - goto out_dput; } + /* check if subvolume may be deleted by a user */ + err = btrfs_may_delete(dir, dentry, 1); + if (err) + goto out_dput; + if (btrfs_ino(inode) != BTRFS_FIRST_FREE_OBJECTID) { err = -EINVAL; goto out_dput; From dba60f3f5d564167118cad151a7d41dfe8d2a5f7 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Fri, 21 Dec 2012 09:19:51 +0000 Subject: [PATCH 357/553] Btrfs: fix resize a readonly device We should not resize a readonly device, fix it. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik --- fs/btrfs/ioctl.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 5a72896bd769..0de21213d05d 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1362,6 +1362,7 @@ static noinline int btrfs_ioctl_resize(struct file *file, printk(KERN_INFO "btrfs: resizing devid %llu\n", (unsigned long long)devid); } + device = btrfs_find_device(root->fs_info, devid, NULL, NULL); if (!device) { printk(KERN_INFO "btrfs: resizer unable to find device %llu\n", @@ -1369,9 +1370,10 @@ static noinline int btrfs_ioctl_resize(struct file *file, ret = -EINVAL; goto out_free; } - if (device->fs_devices && device->fs_devices->seeding) { + + if (!device->writeable) { printk(KERN_INFO "btrfs: resizer unable to apply on " - "seeding device %llu\n", + "readonly device %llu\n", (unsigned long long)devid); ret = -EINVAL; goto out_free; From 97547676570b3bd908560741315bf4b7d635bcf5 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Fri, 21 Dec 2012 10:38:50 +0000 Subject: [PATCH 358/553] Btrfs: fix missing write access release in btrfs_ioctl_resize() We forget to give up the write access after we find some device operation is going on. Fix it. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik --- fs/btrfs/ioctl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 0de21213d05d..982c0b9ceea5 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1339,6 +1339,7 @@ static noinline int btrfs_ioctl_resize(struct file *file, if (atomic_xchg(&root->fs_info->mutually_exclusive_operation_running, 1)) { pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); + mnt_drop_write_file(file); return -EINPROGRESS; } From 72bcd99d450cb1dde8bf13c3b65fc5883b2a3893 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 18 Dec 2012 15:16:34 -0500 Subject: [PATCH 359/553] Btrfs: set flushing if we're limited flushing We still need to say we're flushing if we're limit flushing to keep somebody from coming in and stealing our reservation. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/extent-tree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index d133edfcd449..61fefda74ff5 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3997,7 +3997,7 @@ again: * We make the other tasks wait for the flush only when we can flush * all things. */ - if (ret && flush == BTRFS_RESERVE_FLUSH_ALL) { + if (ret && flush != BTRFS_RESERVE_NO_FLUSH) { flushing = true; space_info->flush = 1; } From f3fe820c20a1a36c790545184e734e78d61cd68d Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 7 Jan 2013 17:03:21 -0500 Subject: [PATCH 360/553] Btrfs: add orphan before truncating pagecache Running xfstests 83 in a loop would sometimes fail the fsck. This happens because if we invalidate a page that already has an ordered extent setup for it we will complete the ordered extent ourselves, assuming that the truncate will clean everything up. The problem with this is there is plenty of time for the truncate to fail after we've done this work. So to fix this we need to add the orphan item first to make sure the cleanup gets done properly, and then we can truncate the pagecache and all that stuff and be safe. This fixes the btrfsck failures I was seeing while running 83 in a loop. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/inode.c | 53 ++++++++++++++++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 15 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 67ed24ae86bb..4ddcf79e7894 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2478,6 +2478,18 @@ int btrfs_orphan_cleanup(struct btrfs_root *root) continue; } nr_truncate++; + + /* 1 for the orphan item deletion. */ + trans = btrfs_start_transaction(root, 1); + if (IS_ERR(trans)) { + ret = PTR_ERR(trans); + goto out; + } + ret = btrfs_orphan_add(trans, inode); + btrfs_end_transaction(trans, root); + if (ret) + goto out; + ret = btrfs_truncate(inode); } else { nr_unlink++; @@ -3783,9 +3795,34 @@ static int btrfs_setsize(struct inode *inode, loff_t newsize) set_bit(BTRFS_INODE_ORDERED_DATA_CLOSE, &BTRFS_I(inode)->runtime_flags); + /* + * 1 for the orphan item we're going to add + * 1 for the orphan item deletion. + */ + trans = btrfs_start_transaction(root, 2); + if (IS_ERR(trans)) + return PTR_ERR(trans); + + /* + * We need to do this in case we fail at _any_ point during the + * actual truncate. Once we do the truncate_setsize we could + * invalidate pages which forces any outstanding ordered io to + * be instantly completed which will give us extents that need + * to be truncated. If we fail to get an orphan inode down we + * could have left over extents that were never meant to live, + * so we need to garuntee from this point on that everything + * will be consistent. + */ + ret = btrfs_orphan_add(trans, inode); + btrfs_end_transaction(trans, root); + if (ret) + return ret; + /* we don't support swapfiles, so vmtruncate shouldn't fail */ truncate_setsize(inode, newsize); ret = btrfs_truncate(inode); + if (ret && inode->i_nlink) + btrfs_orphan_del(NULL, inode); } return ret; @@ -6929,11 +6966,9 @@ static int btrfs_truncate(struct inode *inode) /* * 1 for the truncate slack space - * 1 for the orphan item we're going to add - * 1 for the orphan item deletion * 1 for updating the inode. */ - trans = btrfs_start_transaction(root, 4); + trans = btrfs_start_transaction(root, 2); if (IS_ERR(trans)) { err = PTR_ERR(trans); goto out; @@ -6944,12 +6979,6 @@ static int btrfs_truncate(struct inode *inode) min_size); BUG_ON(ret); - ret = btrfs_orphan_add(trans, inode); - if (ret) { - btrfs_end_transaction(trans, root); - goto out; - } - /* * setattr is responsible for setting the ordered_data_close flag, * but that is only tested during the last file release. That @@ -7018,12 +7047,6 @@ static int btrfs_truncate(struct inode *inode) ret = btrfs_orphan_del(trans, inode); if (ret) err = ret; - } else if (ret && inode->i_nlink > 0) { - /* - * Failed to do the truncate, remove us from the in memory - * orphan list. - */ - ret = btrfs_orphan_del(NULL, inode); } if (trans) { From ac5c93005b7073732e268606688fb6c821d5310e Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Thu, 27 Dec 2012 09:01:24 +0000 Subject: [PATCH 361/553] Btrfs: let allocation start from the right raid type This'd avoid us empty looping. Say we have only one disk and the metadata raid type will be defaultly DUP, and we do not need to start from index=0(RAID10) and get over two empty loops to index=2(DUP). Signed-off-by: Liu Bo Signed-off-by: Josef Bacik --- fs/btrfs/extent-tree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 61fefda74ff5..aeba53191ece 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5560,7 +5560,7 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, int empty_cluster = 2 * 1024 * 1024; struct btrfs_space_info *space_info; int loop = 0; - int index = 0; + int index = __get_raid_index(data); int alloc_type = (data & BTRFS_BLOCK_GROUP_DATA) ? RESERVE_ALLOC_NO_ACCOUNT : RESERVE_ALLOC; bool found_uncached_bg = false; From 3268a2468eb6a31af89930cbae58a62fe6ca6d2d Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Fri, 28 Dec 2012 09:33:19 +0000 Subject: [PATCH 362/553] Btrfs: reset path lock state to zero We forgot to reset the path lock state to zero after we unlock the path block, and this can lead to the ASSERT checker in tree unlock API. Reported-by: Slava Barinov Signed-off-by: Liu Bo Signed-off-by: Josef Bacik --- fs/btrfs/extent-tree.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index aeba53191ece..85b8454d9608 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6788,11 +6788,13 @@ static noinline int walk_up_proc(struct btrfs_trans_handle *trans, &wc->flags[level]); if (ret < 0) { btrfs_tree_unlock_rw(eb, path->locks[level]); + path->locks[level] = 0; return ret; } BUG_ON(wc->refs[level] == 0); if (wc->refs[level] == 1) { btrfs_tree_unlock_rw(eb, path->locks[level]); + path->locks[level] = 0; return 1; } } From 1214b53f90131fee1f950010c43e92455fe598ab Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Mon, 7 Jan 2013 03:53:08 +0000 Subject: [PATCH 363/553] Btrfs: fix off-by-one in lseek Lock end is inclusive. Signed-off-by: Liu Bo Signed-off-by: Josef Bacik --- fs/btrfs/file.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 20452c110d7d..fa48051484b8 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -2242,6 +2242,7 @@ static int find_desired_extent(struct inode *inode, loff_t *offset, int origin) if (lockend <= lockstart) lockend = lockstart + root->sectorsize; + lockend--; len = lockend - lockstart + 1; len = max_t(u64, len, root->sectorsize); From f9e4fb53938de5db01950c9dfe479703b2f5c964 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Mon, 7 Jan 2013 10:10:12 +0000 Subject: [PATCH 364/553] Btrfs: fix a bug when llseek for delalloc bytes behind prealloc extents xfstests case 285 complains. It it because btrfs did not try to find unwritten delalloc bytes(only dirty pages, not yet writeback) behind prealloc extents, it ends up finding nothing while we're with SEEK_DATA. Signed-off-by: Liu Bo Signed-off-by: Josef Bacik --- fs/btrfs/file.c | 9 ++++++--- fs/btrfs/inode.c | 11 ++++++++--- 2 files changed, 14 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index fa48051484b8..841cfe3be0e0 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -2309,9 +2309,12 @@ static int find_desired_extent(struct inode *inode, loff_t *offset, int origin) } } - *offset = start; - free_extent_map(em); - break; + if (!test_bit(EXTENT_FLAG_PREALLOC, + &em->flags)) { + *offset = start; + free_extent_map(em); + break; + } } } diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 4ddcf79e7894..ac98384b174e 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5623,10 +5623,13 @@ struct extent_map *btrfs_get_extent_fiemap(struct inode *inode, struct page *pag return em; if (em) { /* - * if our em maps to a hole, there might - * actually be delalloc bytes behind it + * if our em maps to + * - a hole or + * - a pre-alloc extent, + * there might actually be delalloc bytes behind it. */ - if (em->block_start != EXTENT_MAP_HOLE) + if (em->block_start != EXTENT_MAP_HOLE && + !test_bit(EXTENT_FLAG_PREALLOC, &em->flags)) return em; else hole_em = em; @@ -5708,6 +5711,8 @@ struct extent_map *btrfs_get_extent_fiemap(struct inode *inode, struct page *pag */ em->block_start = hole_em->block_start; em->block_len = hole_len; + if (test_bit(EXTENT_FLAG_PREALLOC, &hole_em->flags)) + set_bit(EXTENT_FLAG_PREALLOC, &em->flags); } else { em->start = range_start; em->len = found; From f276795627045a3c599a60b476767861e4318c7d Mon Sep 17 00:00:00 2001 From: Zach Brown Date: Tue, 8 Jan 2013 19:37:58 +0000 Subject: [PATCH 365/553] btrfs: fix btrfs_cont_expand() freeing IS_ERR em btrfs_cont_expand() tries to free an IS_ERR em as it gets an error from btrfs_get_extent() and breaks out of its loop. An instance of -EEXIST was reported in the wild: https://bugzilla.redhat.com/show_bug.cgi?id=874407 I have no idea if that -EEXIST is surprising, or not. Regardless, this error handling should be cleaned up to handle other reasonable errors (ENOMEM, EIO; whatever). This seemed to be the only buggy freeing of the relatively rare IS_ERR em so I opted to fix the caller rather than teach free_extent_map() to use IS_ERR_OR_NULL(). Signed-off-by: Zach Brown Reviewed-by: Eric Sandeen Signed-off-by: Josef Bacik --- fs/btrfs/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index ac98384b174e..3d2c64d4734a 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3677,6 +3677,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) block_end - cur_offset, 0); if (IS_ERR(em)) { err = PTR_ERR(em); + em = NULL; break; } last_byte = min(extent_map_end(em), block_end); From 3972f2603d8570effaf633cea52b12c7c2773c11 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sat, 12 Jan 2013 02:57:22 +0000 Subject: [PATCH 366/553] btrfs: update timestamps on truncate() truncate() vs. ftruncate() differ in the VFS; truncate() doesn't set (ATTR_CTIME | ATTR_MTIME), and it's up to the fs to do the timestamp updates if the size changes. Signed-off-by: Eric Sandeen Signed-off-by: Josef Bacik --- fs/btrfs/inode.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 3d2c64d4734a..9bc6c40b182d 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -88,7 +88,7 @@ static unsigned char btrfs_type_by_mode[S_IFMT >> S_SHIFT] = { [S_IFLNK >> S_SHIFT] = BTRFS_FT_SYMLINK, }; -static int btrfs_setsize(struct inode *inode, loff_t newsize); +static int btrfs_setsize(struct inode *inode, struct iattr *attr); static int btrfs_truncate(struct inode *inode); static int btrfs_finish_ordered_io(struct btrfs_ordered_extent *ordered_extent); static noinline int cow_file_range(struct inode *inode, @@ -3761,16 +3761,27 @@ next: return err; } -static int btrfs_setsize(struct inode *inode, loff_t newsize) +static int btrfs_setsize(struct inode *inode, struct iattr *attr) { struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_trans_handle *trans; loff_t oldsize = i_size_read(inode); + loff_t newsize = attr->ia_size; + int mask = attr->ia_valid; int ret; if (newsize == oldsize) return 0; + /* + * The regular truncate() case without ATTR_CTIME and ATTR_MTIME is a + * special case where we need to update the times despite not having + * these flags set. For all other operations the VFS set these flags + * explicitly if it wants a timestamp update. + */ + if (newsize != oldsize && (!(mask & (ATTR_CTIME | ATTR_MTIME)))) + inode->i_ctime = inode->i_mtime = current_fs_time(inode->i_sb); + if (newsize > oldsize) { truncate_pagecache(inode, oldsize, newsize); ret = btrfs_cont_expand(inode, oldsize, newsize); @@ -3843,7 +3854,7 @@ static int btrfs_setattr(struct dentry *dentry, struct iattr *attr) return err; if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)) { - err = btrfs_setsize(inode, attr->ia_size); + err = btrfs_setsize(inode, attr); if (err) return err; } From 6d283dba3721cc43be014b50a1acc2f35860a65a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 14 Jan 2013 13:17:50 -0800 Subject: [PATCH 367/553] vfs: add missing virtual cache flush after editing partial pages Andrew Morton pointed this out a month ago, and then I completely forgot about it. If we read a partial last page of a block device, we will zero out the end of the page, but since that page can then be mapped into user space, we should also make sure to flush the cache on architectures that have virtual caches. We have the flush_dcache_page() function for this, so use it. Now, in practice this really never matters, because nobody sane uses virtual caches to begin with, and they largely exist on old broken RISC arhitectures. And even if you did run on one of those obsolete CPU's, the whole "mmap and access the last partial page of a block device" behavior probably doesn't actually exist. The normal IO functions (read/write) will never see the zeroed-out part of the page that migth not be coherent in the cache, because they honor the size of the device. So I'm marking this for stable (3.7 only), but I'm not sure anybody will ever care. Pointed-out-by: Andrew Morton Cc: stable@vger.kernel.org # 3.7 Signed-off-by: Linus Torvalds --- fs/buffer.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/buffer.c b/fs/buffer.c index c017a2dfb909..7a75c3e0fd58 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -2935,6 +2935,7 @@ static void guard_bh_eod(int rw, struct bio *bio, struct buffer_head *bh) void *kaddr = kmap_atomic(bh->b_page); memset(kaddr + bh_offset(bh) + bytes, 0, bh->b_size - bytes); kunmap_atomic(kaddr); + flush_dcache_page(bh->b_page); } } From 7e2fb2d7e6a3094473f101ae33dd6431ae6d2ed1 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Tue, 18 Dec 2012 11:03:57 -0600 Subject: [PATCH 368/553] jbd: don't wake kjournald unnecessarily Don't send an extra wakeup to kjournald in the case where we already have the proper target in j_commit_request, i.e. that commit has already been requested for commit. commit d9b0193 "jbd: fix fsync() tid wraparound bug" changed the logic leading to a wakeup, but it caused some extra wakeups which were found to lead to a measurable performance regression. Signed-off-by: Eric Sandeen Signed-off-by: Jan Kara --- fs/jbd/journal.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index a2862339323b..81cc7eaff863 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -446,7 +446,8 @@ int __log_start_commit(journal_t *journal, tid_t target) * currently running transaction (if it exists). Otherwise, * the target tid must be an old one. */ - if (journal->j_running_transaction && + if (journal->j_commit_request != target && + journal->j_running_transaction && journal->j_running_transaction->t_tid == target) { /* * We want a new commit: OK, mark the request and wakeup the From 1b1baff6e50df855238ce5e6c0e7dbb8a261fb32 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 14 Jan 2013 22:53:47 +0100 Subject: [PATCH 369/553] UDF: Fix a null pointer dereference in udf_sb_free_partitions This patch fixes a regression caused by commit bff943af6fe "udf: Fix memory leak when mounting" due to which it was triggering a kernel null point dereference in case of interrupted mount OR when allocating memory to sbi->s_partmaps failed in function udf_sb_alloc_partition_maps. Reported-and-tested-by: James Hogan Signed-off-by: Namjae Jeon Signed-off-by: Ashish Sangwan Signed-off-by: Jan Kara --- fs/udf/super.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/udf/super.c b/fs/udf/super.c index d44fb568abe1..e9be396a558d 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -307,7 +307,8 @@ static void udf_sb_free_partitions(struct super_block *sb) { struct udf_sb_info *sbi = UDF_SB(sb); int i; - + if (sbi->s_partmaps == NULL) + return; for (i = 0; i < sbi->s_partitions; i++) udf_free_partition(&sbi->s_partmaps[i]); kfree(sbi->s_partmaps); From 9e16721498b0c3d3ebfa0b503c63d35c0a4c0642 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 27 Nov 2012 14:09:40 +0000 Subject: [PATCH 370/553] PCI: Allow pcie_aspm=force even when FADT indicates it is unsupported Right now using pcie_aspm=force will not enable ASPM if the FADT indicates ASPM is unsupported. However, the semantics of force should probably allow for this, especially as they did before 3c076351c4 ("PCI: Rework ASPM disable code") This patch just skips the clearing of any ASPM setup that the firmware has carried out on this bus if pcie_aspm=force is being used. Reference: http://bugs.launchpad.net/bugs/962038 Signed-off-by: Colin Ian King Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org --- drivers/pci/pcie/aspm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index b52630b8eada..8474b6a4fc9b 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -771,6 +771,9 @@ void pcie_clear_aspm(struct pci_bus *bus) { struct pci_dev *child; + if (aspm_force) + return; + /* * Clear any ASPM setup that the firmware has carried out on this bus */ From fa9150a84ca333f68127097c4fa1eda4b3913a22 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Tue, 15 Jan 2013 16:45:24 +0900 Subject: [PATCH 371/553] f2fs: remove the blk_plug usage in f2fs_write_data_pages Let's consider the usage of blk_plug in f2fs_write_data_pages(). We can come up with the two issues: lock contention and task awareness. 1. Merging bios prior to grabing "queue lock" The f2fs merges consecutive IOs in the file system level before submitting any bios, which is similar with the back merge by the plugging mechanism in attempt_plug_merge(). Both of them need to acquire no queue lock. 2. Merging policy with respect to tasks The f2fs merges IOs as much as possible regardless of tasks, while blk-plugging is conducted on a basis of tasks. As we can understand there are trade-offs, f2fs tries to maximize the write performance with well-merged bios. As a result, if f2fs produces many consecutive but separated bios in writepages(), it would be good to use blk-plugging since f2fs would be able to avoid queue lock contention in the block layer by merging them. But, f2fs merges IOs and submit one bio, which means that there are not much chances to merge bios by attempt_plug_merge(). However, f2fs has already been used blk_plug by triggering generic_writepages() in f2fs_write_data_pages(). So to make the overall code consistency, I'd like to remove blk_plug there. Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim --- fs/f2fs/data.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index 3aa5ce7cab83..b1347fc6d688 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -547,6 +547,15 @@ redirty_out: #define MAX_DESIRED_PAGES_WP 4096 +static int __f2fs_writepage(struct page *page, struct writeback_control *wbc, + void *data) +{ + struct address_space *mapping = data; + int ret = mapping->a_ops->writepage(page, wbc); + mapping_set_error(mapping, ret); + return ret; +} + static int f2fs_write_data_pages(struct address_space *mapping, struct writeback_control *wbc) { @@ -563,7 +572,7 @@ static int f2fs_write_data_pages(struct address_space *mapping, if (!S_ISDIR(inode->i_mode)) mutex_lock(&sbi->writepages); - ret = generic_writepages(mapping, wbc); + ret = write_cache_pages(mapping, wbc, __f2fs_writepage, mapping); if (!S_ISDIR(inode->i_mode)) mutex_unlock(&sbi->writepages); f2fs_submit_bio(sbi, DATA, (wbc->sync_mode == WB_SYNC_ALL)); From 66af62ce7588736ae65edfdb1c0df597775c4d21 Mon Sep 17 00:00:00 2001 From: majianpeng Date: Mon, 14 Jan 2013 20:08:16 +0800 Subject: [PATCH 372/553] f2fs: add global mutex_lock to protect f2fs_stat_list There is an race condition between umounting f2fs and reading f2fs/status, which results in oops. Fox example: Thread A Thread B umount f2fs cat f2fs/status f2fs_destroy_stats() { stat_show() { list_for_each_entry_safe(&f2fs_stat_list) list_del(&si->stat_list); mutex_lock(&si->stat_lock); si->sbi = NULL; mutex_unlock(&si->stat_lock); kfree(sbi->stat_info); } mutex_lock(&si->stat_lock) <- si is gone. ... } Solution with a global lock: f2fs_stat_mutex: Thread A Thread B umount f2fs cat f2fs/status f2fs_destroy_stats() { stat_show() { mutex_lock(&f2fs_stat_mutex); list_del(&si->stat_list); mutex_unlock(&f2fs_stat_mutex); kfree(sbi->stat_info); mutex_lock(&f2fs_stat_mutex); } list_for_each_entry_safe(&f2fs_stat_list) ... mutex_unlock(&f2fs_stat_mutex); } Signed-off-by: Jianpeng Ma [jaegeuk.kim@samsung.com: fix typos, description, and remove the existing lock] Signed-off-by: Jaegeuk Kim --- fs/f2fs/debug.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/fs/f2fs/debug.c b/fs/f2fs/debug.c index b8ed7a72c6e9..73f034a94182 100644 --- a/fs/f2fs/debug.c +++ b/fs/f2fs/debug.c @@ -26,6 +26,7 @@ static LIST_HEAD(f2fs_stat_list); static struct dentry *debugfs_root; +static DEFINE_MUTEX(f2fs_stat_mutex); static void update_general_status(struct f2fs_sb_info *sbi) { @@ -180,13 +181,9 @@ static int stat_show(struct seq_file *s, void *v) int i = 0; int j; + mutex_lock(&f2fs_stat_mutex); list_for_each_entry_safe(si, next, &f2fs_stat_list, stat_list) { - mutex_lock(&si->stat_lock); - if (!si->sbi) { - mutex_unlock(&si->stat_lock); - continue; - } update_general_status(si->sbi); seq_printf(s, "\n=====[ partition info. #%d ]=====\n", i++); @@ -286,8 +283,8 @@ static int stat_show(struct seq_file *s, void *v) seq_printf(s, "\nMemory: %u KB = static: %u + cached: %u\n", (si->base_mem + si->cache_mem) >> 10, si->base_mem >> 10, si->cache_mem >> 10); - mutex_unlock(&si->stat_lock); } + mutex_unlock(&f2fs_stat_mutex); return 0; } @@ -313,9 +310,6 @@ static int init_stats(struct f2fs_sb_info *sbi) return -ENOMEM; si = sbi->stat_info; - mutex_init(&si->stat_lock); - list_add_tail(&si->stat_list, &f2fs_stat_list); - si->all_area_segs = le32_to_cpu(raw_super->segment_count); si->sit_area_segs = le32_to_cpu(raw_super->segment_count_sit); si->nat_area_segs = le32_to_cpu(raw_super->segment_count_nat); @@ -325,6 +319,11 @@ static int init_stats(struct f2fs_sb_info *sbi) si->main_area_zones = si->main_area_sections / le32_to_cpu(raw_super->secs_per_zone); si->sbi = sbi; + + mutex_lock(&f2fs_stat_mutex); + list_add_tail(&si->stat_list, &f2fs_stat_list); + mutex_unlock(&f2fs_stat_mutex); + return 0; } @@ -347,10 +346,10 @@ void f2fs_destroy_stats(struct f2fs_sb_info *sbi) { struct f2fs_stat_info *si = sbi->stat_info; + mutex_lock(&f2fs_stat_mutex); list_del(&si->stat_list); - mutex_lock(&si->stat_lock); - si->sbi = NULL; - mutex_unlock(&si->stat_lock); + mutex_unlock(&f2fs_stat_mutex); + kfree(sbi->stat_info); } From 4589d25d015c2d02bb5f7075d0cbf6dcf23a33c0 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Tue, 15 Jan 2013 19:58:47 +0900 Subject: [PATCH 373/553] f2fs: fix the debugfs entry creation path As the "status" debugfs entry will be maintained for entire F2FS filesystem irrespective of the number of partitions. So, we can move the initialization to the init part of the f2fs and destroy will be done from exit part. After making changes, for individual partition mount - entry creation code will not be executed. Signed-off-by: Jianpeng Ma Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim --- fs/f2fs/debug.c | 27 ++++++++++----------------- fs/f2fs/f2fs.h | 6 ++++-- fs/f2fs/super.c | 7 +++++-- 3 files changed, 19 insertions(+), 21 deletions(-) diff --git a/fs/f2fs/debug.c b/fs/f2fs/debug.c index 73f034a94182..c8c37307b326 100644 --- a/fs/f2fs/debug.c +++ b/fs/f2fs/debug.c @@ -300,7 +300,7 @@ static const struct file_operations stat_fops = { .release = single_release, }; -static int init_stats(struct f2fs_sb_info *sbi) +int f2fs_build_stats(struct f2fs_sb_info *sbi) { struct f2fs_super_block *raw_super = F2FS_RAW_SUPER(sbi); struct f2fs_stat_info *si; @@ -327,21 +327,6 @@ static int init_stats(struct f2fs_sb_info *sbi) return 0; } -int f2fs_build_stats(struct f2fs_sb_info *sbi) -{ - int retval; - - retval = init_stats(sbi); - if (retval) - return retval; - - if (!debugfs_root) - debugfs_root = debugfs_create_dir("f2fs", NULL); - - debugfs_create_file("status", S_IRUGO, debugfs_root, NULL, &stat_fops); - return 0; -} - void f2fs_destroy_stats(struct f2fs_sb_info *sbi) { struct f2fs_stat_info *si = sbi->stat_info; @@ -353,7 +338,15 @@ void f2fs_destroy_stats(struct f2fs_sb_info *sbi) kfree(sbi->stat_info); } -void destroy_root_stats(void) +void __init f2fs_create_root_stats(void) +{ + debugfs_root = debugfs_create_dir("f2fs", NULL); + if (debugfs_root) + debugfs_create_file("status", S_IRUGO, debugfs_root, + NULL, &stat_fops); +} + +void f2fs_destroy_root_stats(void) { debugfs_remove_recursive(debugfs_root); debugfs_root = NULL; diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 285e43d602f3..976325d51e3d 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -1060,7 +1060,8 @@ struct f2fs_stat_info { int f2fs_build_stats(struct f2fs_sb_info *); void f2fs_destroy_stats(struct f2fs_sb_info *); -void destroy_root_stats(void); +void f2fs_create_root_stats(void); +void f2fs_destroy_root_stats(void); #else #define stat_inc_call_count(si) #define stat_inc_seg_count(si, type) @@ -1070,7 +1071,8 @@ void destroy_root_stats(void); static inline int f2fs_build_stats(struct f2fs_sb_info *sbi) { return 0; } static inline void f2fs_destroy_stats(struct f2fs_sb_info *sbi) { } -static inline void destroy_root_stats(void) { } +static inline void f2fs_create_root_stats(void) { } +static inline void f2fs_destroy_root_stats(void) { } #endif extern const struct file_operations f2fs_dir_operations; diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index ac127fde8e11..d551a724b736 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -675,14 +675,17 @@ static int __init init_f2fs_fs(void) err = create_checkpoint_caches(); if (err) goto fail; - return register_filesystem(&f2fs_fs_type); + err = register_filesystem(&f2fs_fs_type); + if (err) + goto fail; + f2fs_create_root_stats(); fail: return err; } static void __exit exit_f2fs_fs(void) { - destroy_root_stats(); + f2fs_destroy_root_stats(); unregister_filesystem(&f2fs_fs_type); destroy_checkpoint_caches(); destroy_gc_caches(); From 0f3b6849dd55943d915f4b461d7db5e8308d4083 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 15 Jan 2013 12:05:55 +0000 Subject: [PATCH 374/553] drm/i915: Record DERRMR, FORCEWAKE and RING_CTL in error-state These are useful for investigating hangs involving WAIT_FOR_EVENT. Signed-off-by: Chris Wilson [danvet: Apply a droplet of Future-Proof in the if-ladder.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_debugfs.c | 3 +++ drivers/gpu/drm/i915/i915_drv.h | 3 +++ drivers/gpu/drm/i915/i915_irq.c | 11 +++++++++++ drivers/gpu/drm/i915/i915_reg.h | 2 ++ 4 files changed, 19 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index e6a11ca85eaf..7944d301518a 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -641,6 +641,7 @@ static void i915_ring_error_state(struct seq_file *m, seq_printf(m, "%s command stream:\n", ring_str(ring)); seq_printf(m, " HEAD: 0x%08x\n", error->head[ring]); seq_printf(m, " TAIL: 0x%08x\n", error->tail[ring]); + seq_printf(m, " CTL: 0x%08x\n", error->ctl[ring]); seq_printf(m, " ACTHD: 0x%08x\n", error->acthd[ring]); seq_printf(m, " IPEIR: 0x%08x\n", error->ipeir[ring]); seq_printf(m, " IPEHR: 0x%08x\n", error->ipehr[ring]); @@ -693,6 +694,8 @@ static int i915_error_state(struct seq_file *m, void *unused) seq_printf(m, "EIR: 0x%08x\n", error->eir); seq_printf(m, "IER: 0x%08x\n", error->ier); seq_printf(m, "PGTBL_ER: 0x%08x\n", error->pgtbl_er); + seq_printf(m, "FORCEWAKE: 0x%08x\n", error->forcewake); + seq_printf(m, "DERRMR: 0x%08x\n", error->derrmr); seq_printf(m, "CCID: 0x%08x\n", error->ccid); for (i = 0; i < dev_priv->num_fence_regs; i++) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index ed3059575576..12ab3bdea54d 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -188,10 +188,13 @@ struct drm_i915_error_state { u32 pgtbl_er; u32 ier; u32 ccid; + u32 derrmr; + u32 forcewake; bool waiting[I915_NUM_RINGS]; u32 pipestat[I915_MAX_PIPES]; u32 tail[I915_NUM_RINGS]; u32 head[I915_NUM_RINGS]; + u32 ctl[I915_NUM_RINGS]; u32 ipeir[I915_NUM_RINGS]; u32 ipehr[I915_NUM_RINGS]; u32 instdone[I915_NUM_RINGS]; diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 2220dec3e5d9..fe843389c7b4 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1157,6 +1157,7 @@ static void i915_record_ring_state(struct drm_device *dev, error->acthd[ring->id] = intel_ring_get_active_head(ring); error->head[ring->id] = I915_READ_HEAD(ring); error->tail[ring->id] = I915_READ_TAIL(ring); + error->ctl[ring->id] = I915_READ_CTL(ring); error->cpu_ring_head[ring->id] = ring->head; error->cpu_ring_tail[ring->id] = ring->tail; @@ -1251,6 +1252,16 @@ static void i915_capture_error_state(struct drm_device *dev) else error->ier = I915_READ(IER); + if (INTEL_INFO(dev)->gen >= 6) + error->derrmr = I915_READ(DERRMR); + + if (IS_VALLEYVIEW(dev)) + error->forcewake = I915_READ(FORCEWAKE_VLV); + else if (INTEL_INFO(dev)->gen >= 7) + error->forcewake = I915_READ(FORCEWAKE_MT); + else if (INTEL_INFO(dev)->gen == 6) + error->forcewake = I915_READ(FORCEWAKE); + for_each_pipe(pipe) error->pipestat[pipe] = I915_READ(PIPESTAT(pipe)); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 186ee5c85b51..b401788e1791 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -512,6 +512,8 @@ #define GEN7_ERR_INT 0x44040 #define ERR_INT_MMIO_UNCLAIMED (1<<13) +#define DERRMR 0x44050 + /* GM45+ chicken bits -- debug workaround bits that may be required * for various sorts of correct behavior. The top 16 bits of each are * the enables for writing to the corresponding low bit. From 8aef33a7cf40ca9da188e8578b2abe7267a38c52 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Tue, 15 Jan 2013 14:18:04 +0100 Subject: [PATCH 375/553] cpuidle: remove the power_specified field in the driver We realized that the power usage field is never filled and when it is filled for tegra, the power_specified flag is not set causing all of these values to be reset when the driver is initialized with set_power_state(). However, the power_specified flag can be simply removed under the assumption that the states are always backward sorted, which is the case with the current code. This change allows the menu governor select function and the cpuidle_play_dead() to be simplified. Moreover, the set_power_states() function can removed as it does not make sense any more. Drop the power_specified flag from struct cpuidle_driver and make the related changes as described above. As a consequence, this also fixes the bug where on the dynamic C-states system, the power fields are not initialized. [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=42870 References: https://bugzilla.kernel.org/show_bug.cgi?id=43349 References: https://lkml.org/lkml/2012/10/16/518 Signed-off-by: Daniel Lezcano Signed-off-by: Rafael J. Wysocki --- drivers/cpuidle/cpuidle.c | 17 ++++------------- drivers/cpuidle/driver.c | 25 ------------------------- drivers/cpuidle/governors/menu.c | 8 ++------ include/linux/cpuidle.h | 2 +- 4 files changed, 7 insertions(+), 45 deletions(-) diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index fb4a7dd57f94..e1f6860e069c 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -69,24 +69,15 @@ int cpuidle_play_dead(void) { struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices); struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev); - int i, dead_state = -1; - int power_usage = INT_MAX; + int i; if (!drv) return -ENODEV; /* Find lowest-power state that supports long-term idle */ - for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) { - struct cpuidle_state *s = &drv->states[i]; - - if (s->power_usage < power_usage && s->enter_dead) { - power_usage = s->power_usage; - dead_state = i; - } - } - - if (dead_state != -1) - return drv->states[dead_state].enter_dead(dev, dead_state); + for (i = drv->state_count - 1; i >= CPUIDLE_DRIVER_STATE_START; i--) + if (drv->states[i].enter_dead) + return drv->states[i].enter_dead(dev, i); return -ENODEV; } diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c index c2b281afe0ed..422c7b69ba7c 100644 --- a/drivers/cpuidle/driver.c +++ b/drivers/cpuidle/driver.c @@ -19,34 +19,9 @@ DEFINE_SPINLOCK(cpuidle_driver_lock); static void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu); static struct cpuidle_driver * __cpuidle_get_cpu_driver(int cpu); -static void set_power_states(struct cpuidle_driver *drv) -{ - int i; - - /* - * cpuidle driver should set the drv->power_specified bit - * before registering if the driver provides - * power_usage numbers. - * - * If power_specified is not set, - * we fill in power_usage with decreasing values as the - * cpuidle code has an implicit assumption that state Cn - * uses less power than C(n-1). - * - * With CONFIG_ARCH_HAS_CPU_RELAX, C0 is already assigned - * an power value of -1. So we use -2, -3, etc, for other - * c-states. - */ - for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) - drv->states[i].power_usage = -1 - i; -} - static void __cpuidle_driver_init(struct cpuidle_driver *drv) { drv->refcnt = 0; - - if (!drv->power_specified) - set_power_states(drv); } static int __cpuidle_register_driver(struct cpuidle_driver *drv, int cpu) diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index 20ea33afdda1..fe343a06b7da 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -312,7 +312,6 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev) { struct menu_device *data = &__get_cpu_var(menu_devices); int latency_req = pm_qos_request(PM_QOS_CPU_DMA_LATENCY); - int power_usage = INT_MAX; int i; int multiplier; struct timespec t; @@ -383,11 +382,8 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev) if (s->exit_latency * multiplier > data->predicted_us) continue; - if (s->power_usage < power_usage) { - power_usage = s->power_usage; - data->last_state_idx = i; - data->exit_us = s->exit_latency; - } + data->last_state_idx = i; + data->exit_us = s->exit_latency; } /* not deepest C-state chosen for low predicted residency */ diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 3711b34dc4f9..24cd1037b6d6 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -126,9 +126,9 @@ struct cpuidle_driver { struct module *owner; int refcnt; - unsigned int power_specified:1; /* set to 1 to use the core cpuidle time keeping (for all states). */ unsigned int en_core_tk_irqen:1; + /* states array must be ordered in decreasing power consumption */ struct cpuidle_state states[CPUIDLE_STATE_MAX]; int state_count; int safe_state_index; From 6f54c361329dbb67dac9de174e938992651d12d7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 15 Jan 2013 14:44:41 +0100 Subject: [PATCH 376/553] ALSA: hda/hdmi - Work around "alsactl restore" errors When "alsactl restore" is performed on HDMI codecs, it tries to restore the channel map value since the channel map controls are writable. But hdmi_chmap_ctl_put() returns -EBADFD when no PCM stream is assigned yet, and this results in an error message from alsactl. Although the error is harmless, it's certainly ugly and can be regarded as a regression. As a workaround, this patch changes the return code in such a case to be zero for making others happy. (A slight excuse is: when the chmap is changed through the proper alsa-lib API, the PCM status is checked there anyway, so we don't have to be too strict in the kernel side.) Cc: [v3.7+] Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index b6c21ea187ca..807a2aa1ff38 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1502,7 +1502,7 @@ static int hdmi_chmap_ctl_put(struct snd_kcontrol *kcontrol, ctl_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); substream = snd_pcm_chmap_substream(info, ctl_idx); if (!substream || !substream->runtime) - return -EBADFD; + return 0; /* just for avoiding error from alsactl restore */ switch (substream->runtime->status->state) { case SNDRV_PCM_STATE_OPEN: case SNDRV_PCM_STATE_SETUP: From 19fc42ed9950d5fe17089c0a928121047c882092 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 14 Jan 2013 11:04:39 -0500 Subject: [PATCH 377/553] drm/radeon: clear reset flags if engines are idle Fixes a hard lock in the gpu reset code after the rework for DMA support (0ecebb9e0d14e9948e0b1529883a776758117d6f "drm/radeon: switch to a finer grained reset for evergreen") due to not bailing before the MC shutdown if the relevant engines are idle. Discussion: http://lists.freedesktop.org/archives/dri-devel/2013-January/032985.html Reported-by: Eldad Zack Tested-by: Eldad Zack Acked-by: Paul Menzel Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/evergreen.c | 6 ++++++ drivers/gpu/drm/radeon/ni.c | 6 ++++++ drivers/gpu/drm/radeon/r600.c | 6 ++++++ drivers/gpu/drm/radeon/si.c | 6 ++++++ 4 files changed, 24 insertions(+) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 061fa0a28900..4d0e60adbc6d 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2401,6 +2401,12 @@ static int evergreen_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) { struct evergreen_mc_save save; + if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE)) + reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE); + + if (RREG32(DMA_STATUS_REG) & DMA_IDLE) + reset_mask &= ~RADEON_RESET_DMA; + if (reset_mask == 0) return 0; diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 896f1cbc58a5..59acabb45c9b 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1409,6 +1409,12 @@ static int cayman_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) { struct evergreen_mc_save save; + if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE)) + reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE); + + if (RREG32(DMA_STATUS_REG) & DMA_IDLE) + reset_mask &= ~RADEON_RESET_DMA; + if (reset_mask == 0) return 0; diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 537e259b3837..3cb9d6089373 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1378,6 +1378,12 @@ static int r600_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) { struct rv515_mc_save save; + if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE)) + reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE); + + if (RREG32(DMA_STATUS_REG) & DMA_IDLE) + reset_mask &= ~RADEON_RESET_DMA; + if (reset_mask == 0) return 0; diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 3240a3d64f30..ae8b48205a6c 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2215,6 +2215,12 @@ static int si_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) { struct evergreen_mc_save save; + if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE)) + reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE); + + if (RREG32(DMA_STATUS_REG) & DMA_IDLE) + reset_mask &= ~RADEON_RESET_DMA; + if (reset_mask == 0) return 0; From c18b1170493de637eea58671da7df5689ce13491 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Sat, 12 Jan 2013 04:19:37 +0100 Subject: [PATCH 378/553] drm/radeon: allow FP16 color clear registers on r500 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Probably not a candidate for stable kernels because of conflicts in DRM versioning. Signed-off-by: Marek Olšák Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_drv.c | 3 ++- drivers/gpu/drm/radeon/reg_srcs/rv515 | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index dff6cf77f953..d9bf96ee299a 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -69,9 +69,10 @@ * 2.26.0 - r600-eg: fix htile size computation * 2.27.0 - r600-SI: Add CS ioctl support for async DMA * 2.28.0 - r600-eg: Add MEM_WRITE packet support + * 2.29.0 - R500 FP16 color clear registers */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 28 +#define KMS_DRIVER_MINOR 29 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/drivers/gpu/drm/radeon/reg_srcs/rv515 b/drivers/gpu/drm/radeon/reg_srcs/rv515 index 911a8fbd32bb..78d5e99d759d 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/rv515 +++ b/drivers/gpu/drm/radeon/reg_srcs/rv515 @@ -324,6 +324,8 @@ rv515 0x6d40 0x46AC US_OUT_FMT_2 0x46B0 US_OUT_FMT_3 0x46B4 US_W_FMT +0x46C0 RB3D_COLOR_CLEAR_VALUE_AR +0x46C4 RB3D_COLOR_CLEAR_VALUE_GB 0x4BC0 FG_FOG_BLEND 0x4BC4 FG_FOG_FACTOR 0x4BC8 FG_FOG_COLOR_R From 5f0839c11e17d8d942ab02626752f95e30a02a4c Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 11 Jan 2013 15:19:43 -0500 Subject: [PATCH 379/553] drm/radeon: improve semaphore debugging on lockup Signed-off-by: Jerome Glisse Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon.h | 2 ++ drivers/gpu/drm/radeon/radeon_ring.c | 2 ++ drivers/gpu/drm/radeon/radeon_semaphore.c | 4 ++++ 3 files changed, 8 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 34e52304a525..768e8fec0099 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -654,6 +654,8 @@ struct radeon_ring { u32 ptr_reg_mask; u32 nop; u32 idx; + u64 last_semaphore_signal_addr; + u64 last_semaphore_wait_addr; }; /* diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index 141f2b6a9cf2..2430d80b1871 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -784,6 +784,8 @@ static int radeon_debugfs_ring_info(struct seq_file *m, void *data) } seq_printf(m, "driver's copy of the wptr: 0x%08x [%5d]\n", ring->wptr, ring->wptr); seq_printf(m, "driver's copy of the rptr: 0x%08x [%5d]\n", ring->rptr, ring->rptr); + seq_printf(m, "last semaphore signal addr : 0x%016llx\n", ring->last_semaphore_signal_addr); + seq_printf(m, "last semaphore wait addr : 0x%016llx\n", ring->last_semaphore_wait_addr); seq_printf(m, "%u free dwords in ring\n", ring->ring_free_dw); seq_printf(m, "%u dwords in ring\n", count); /* print 8 dw before current rptr as often it's the last executed diff --git a/drivers/gpu/drm/radeon/radeon_semaphore.c b/drivers/gpu/drm/radeon/radeon_semaphore.c index 97f3ece81cd2..8dcc20f53d73 100644 --- a/drivers/gpu/drm/radeon/radeon_semaphore.c +++ b/drivers/gpu/drm/radeon/radeon_semaphore.c @@ -95,6 +95,10 @@ int radeon_semaphore_sync_rings(struct radeon_device *rdev, /* we assume caller has already allocated space on waiters ring */ radeon_semaphore_emit_wait(rdev, waiter, semaphore); + /* for debugging lockup only, used by sysfs debug files */ + rdev->ring[signaler].last_semaphore_signal_addr = semaphore->gpu_addr; + rdev->ring[waiter].last_semaphore_wait_addr = semaphore->gpu_addr; + return 0; } From 72d0ac048f3ded4022cf1cc72f54073f6fcad72f Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 14 Jan 2013 14:45:46 +0000 Subject: [PATCH 380/553] arm64: compat: add syscall table entries for new syscalls There have been a number of new syscalls introduced to arch/arm/ since the compat layer was implemented for arm64, so add pointers to the relevant functions to the compat syscall table. Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/unistd32.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index 58432625fdb3..5ef47ba3ed45 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -395,8 +395,13 @@ __SYSCALL(370, sys_name_to_handle_at) __SYSCALL(371, compat_sys_open_by_handle_at) __SYSCALL(372, compat_sys_clock_adjtime) __SYSCALL(373, sys_syncfs) +__SYSCALL(374, compat_sys_sendmmsg) +__SYSCALL(375, sys_setns) +__SYSCALL(376, compat_sys_process_vm_readv) +__SYSCALL(377, compat_sys_process_vm_writev) +__SYSCALL(378, sys_ni_syscall) /* 378 for kcmp */ -#define __NR_compat_syscalls 374 +#define __NR_compat_syscalls 379 /* * Compat syscall numbers used by the AArch64 kernel. From ec1287e511320a2c9a02640b7ac02d5d79f56f08 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 15 Jan 2013 10:45:26 -0700 Subject: [PATCH 381/553] vfio-pci: Fix buffer overfill A read from a range hidden from the user (ex. MSI-X vector table) attempts to fill the user buffer up to the end of the excluded range instead of up to the requested count. Fix it. Signed-off-by: Alex Williamson Cc: stable@vger.kernel.org --- drivers/vfio/pci/vfio_pci_rdwr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/vfio/pci/vfio_pci_rdwr.c b/drivers/vfio/pci/vfio_pci_rdwr.c index 4362d9e7baa3..f72323ef618f 100644 --- a/drivers/vfio/pci/vfio_pci_rdwr.c +++ b/drivers/vfio/pci/vfio_pci_rdwr.c @@ -240,17 +240,17 @@ ssize_t vfio_pci_mem_readwrite(struct vfio_pci_device *vdev, char __user *buf, filled = 1; } else { /* Drop writes, fill reads with FF */ + filled = min((size_t)(x_end - pos), count); if (!iswrite) { char val = 0xFF; size_t i; - for (i = 0; i < x_end - pos; i++) { + for (i = 0; i < filled; i++) { if (put_user(val, buf + i)) goto out; } } - filled = x_end - pos; } count -= filled; From 6337a23992826e68257fba51267cb6996439520d Mon Sep 17 00:00:00 2001 From: Yang Zhang Date: Thu, 22 Nov 2012 10:20:23 +0800 Subject: [PATCH 382/553] x86/xen : Fix the wrong check in pciback Fix the wrong check in pciback. Signed-off-by: Yang Zhang Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xen-pciback/pciback.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/xen-pciback/pciback.h b/drivers/xen/xen-pciback/pciback.h index a7def010eba3..f72af87640e0 100644 --- a/drivers/xen/xen-pciback/pciback.h +++ b/drivers/xen/xen-pciback/pciback.h @@ -124,7 +124,7 @@ static inline int xen_pcibk_add_pci_dev(struct xen_pcibk_device *pdev, static inline void xen_pcibk_release_pci_dev(struct xen_pcibk_device *pdev, struct pci_dev *dev) { - if (xen_pcibk_backend && xen_pcibk_backend->free) + if (xen_pcibk_backend && xen_pcibk_backend->release) return xen_pcibk_backend->release(pdev, dev); } From d0b4d64aadb9f4a90669848de9ef3819050a98cd Mon Sep 17 00:00:00 2001 From: Matt Wilson Date: Tue, 15 Jan 2013 13:21:27 +0000 Subject: [PATCH 383/553] xen/grant-table: correctly initialize grant table version 1 Commit 85ff6acb075a484780b3d763fdf41596d8fc0970 (xen/granttable: Grant tables V2 implementation) changed the GREFS_PER_GRANT_FRAME macro from a constant to a conditional expression. The expression depends on grant_table_version being appropriately set. Unfortunately, at init time grant_table_version will be 0. The GREFS_PER_GRANT_FRAME conditional expression checks for "grant_table_version == 1", and therefore returns the number of grant references per frame for v2. This causes gnttab_init() to allocate fewer pages for gnttab_list, as a frame can old half the number of v2 entries than v1 entries. After gnttab_resume() is called, grant_table_version is appropriately set. nr_init_grefs will then be miscalculated and gnttab_free_count will hold a value larger than the actual number of free gref entries. If a guest is heavily utilizing improperly initialized v1 grant tables, memory corruption can occur. One common manifestation is corruption of the vmalloc list, resulting in a poisoned pointer derefrence when accessing /proc/meminfo or /proc/vmallocinfo: [ 40.770064] BUG: unable to handle kernel paging request at 0000200200001407 [ 40.770083] IP: [] get_vmalloc_info+0x70/0x110 [ 40.770102] PGD 0 [ 40.770107] Oops: 0000 [#1] SMP [ 40.770114] CPU 10 This patch introduces a static variable, grefs_per_grant_frame, to cache the calculated value. gnttab_init() now calls gnttab_request_version() early so that grant_table_version and grefs_per_grant_frame can be appropriately set. A few BUG_ON()s have been added to prevent this type of bug from reoccurring in the future. Signed-off-by: Matt Wilson Reviewed-and-Tested-by: Steven Noonan Acked-by: Ian Campbell Cc: Konrad Rzeszutek Wilk Cc: Annie Li Cc: xen-devel@lists.xen.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v3.3 and newer Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/grant-table.c | 50 +++++++++++++++++++++++---------------- 1 file changed, 30 insertions(+), 20 deletions(-) diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index b91f14e83164..95ce9d02ceca 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -56,10 +56,6 @@ /* External tools reserve first few grant table entries. */ #define NR_RESERVED_ENTRIES 8 #define GNTTAB_LIST_END 0xffffffff -#define GREFS_PER_GRANT_FRAME \ -(grant_table_version == 1 ? \ -(PAGE_SIZE / sizeof(struct grant_entry_v1)) : \ -(PAGE_SIZE / sizeof(union grant_entry_v2))) static grant_ref_t **gnttab_list; static unsigned int nr_grant_frames; @@ -154,6 +150,7 @@ static struct gnttab_ops *gnttab_interface; static grant_status_t *grstatus; static int grant_table_version; +static int grefs_per_grant_frame; static struct gnttab_free_callback *gnttab_free_callback_list; @@ -767,12 +764,14 @@ static int grow_gnttab_list(unsigned int more_frames) unsigned int new_nr_grant_frames, extra_entries, i; unsigned int nr_glist_frames, new_nr_glist_frames; - new_nr_grant_frames = nr_grant_frames + more_frames; - extra_entries = more_frames * GREFS_PER_GRANT_FRAME; + BUG_ON(grefs_per_grant_frame == 0); - nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP; + new_nr_grant_frames = nr_grant_frames + more_frames; + extra_entries = more_frames * grefs_per_grant_frame; + + nr_glist_frames = (nr_grant_frames * grefs_per_grant_frame + RPP - 1) / RPP; new_nr_glist_frames = - (new_nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP; + (new_nr_grant_frames * grefs_per_grant_frame + RPP - 1) / RPP; for (i = nr_glist_frames; i < new_nr_glist_frames; i++) { gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_ATOMIC); if (!gnttab_list[i]) @@ -780,12 +779,12 @@ static int grow_gnttab_list(unsigned int more_frames) } - for (i = GREFS_PER_GRANT_FRAME * nr_grant_frames; - i < GREFS_PER_GRANT_FRAME * new_nr_grant_frames - 1; i++) + for (i = grefs_per_grant_frame * nr_grant_frames; + i < grefs_per_grant_frame * new_nr_grant_frames - 1; i++) gnttab_entry(i) = i + 1; gnttab_entry(i) = gnttab_free_head; - gnttab_free_head = GREFS_PER_GRANT_FRAME * nr_grant_frames; + gnttab_free_head = grefs_per_grant_frame * nr_grant_frames; gnttab_free_count += extra_entries; nr_grant_frames = new_nr_grant_frames; @@ -957,7 +956,8 @@ EXPORT_SYMBOL_GPL(gnttab_unmap_refs); static unsigned nr_status_frames(unsigned nr_grant_frames) { - return (nr_grant_frames * GREFS_PER_GRANT_FRAME + SPP - 1) / SPP; + BUG_ON(grefs_per_grant_frame == 0); + return (nr_grant_frames * grefs_per_grant_frame + SPP - 1) / SPP; } static int gnttab_map_frames_v1(xen_pfn_t *frames, unsigned int nr_gframes) @@ -1115,6 +1115,7 @@ static void gnttab_request_version(void) rc = HYPERVISOR_grant_table_op(GNTTABOP_set_version, &gsv, 1); if (rc == 0 && gsv.version == 2) { grant_table_version = 2; + grefs_per_grant_frame = PAGE_SIZE / sizeof(union grant_entry_v2); gnttab_interface = &gnttab_v2_ops; } else if (grant_table_version == 2) { /* @@ -1127,17 +1128,17 @@ static void gnttab_request_version(void) panic("we need grant tables version 2, but only version 1 is available"); } else { grant_table_version = 1; + grefs_per_grant_frame = PAGE_SIZE / sizeof(struct grant_entry_v1); gnttab_interface = &gnttab_v1_ops; } printk(KERN_INFO "Grant tables using version %d layout.\n", grant_table_version); } -int gnttab_resume(void) +static int gnttab_setup(void) { unsigned int max_nr_gframes; - gnttab_request_version(); max_nr_gframes = gnttab_max_grant_frames(); if (max_nr_gframes < nr_grant_frames) return -ENOSYS; @@ -1160,6 +1161,12 @@ int gnttab_resume(void) return 0; } +int gnttab_resume(void) +{ + gnttab_request_version(); + return gnttab_setup(); +} + int gnttab_suspend(void) { gnttab_interface->unmap_frames(); @@ -1171,9 +1178,10 @@ static int gnttab_expand(unsigned int req_entries) int rc; unsigned int cur, extra; + BUG_ON(grefs_per_grant_frame == 0); cur = nr_grant_frames; - extra = ((req_entries + (GREFS_PER_GRANT_FRAME-1)) / - GREFS_PER_GRANT_FRAME); + extra = ((req_entries + (grefs_per_grant_frame-1)) / + grefs_per_grant_frame); if (cur + extra > gnttab_max_grant_frames()) return -ENOSPC; @@ -1191,21 +1199,23 @@ int gnttab_init(void) unsigned int nr_init_grefs; int ret; + gnttab_request_version(); nr_grant_frames = 1; boot_max_nr_grant_frames = __max_nr_grant_frames(); /* Determine the maximum number of frames required for the * grant reference free list on the current hypervisor. */ + BUG_ON(grefs_per_grant_frame == 0); max_nr_glist_frames = (boot_max_nr_grant_frames * - GREFS_PER_GRANT_FRAME / RPP); + grefs_per_grant_frame / RPP); gnttab_list = kmalloc(max_nr_glist_frames * sizeof(grant_ref_t *), GFP_KERNEL); if (gnttab_list == NULL) return -ENOMEM; - nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP; + nr_glist_frames = (nr_grant_frames * grefs_per_grant_frame + RPP - 1) / RPP; for (i = 0; i < nr_glist_frames; i++) { gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_KERNEL); if (gnttab_list[i] == NULL) { @@ -1214,12 +1224,12 @@ int gnttab_init(void) } } - if (gnttab_resume() < 0) { + if (gnttab_setup() < 0) { ret = -ENODEV; goto ini_nomem; } - nr_init_grefs = nr_grant_frames * GREFS_PER_GRANT_FRAME; + nr_init_grefs = nr_grant_frames * grefs_per_grant_frame; for (i = NR_RESERVED_ENTRIES; i < nr_init_grefs - 1; i++) gnttab_entry(i) = i + 1; From e5c702d3b268066dc70d619ecff06a08065f343f Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 15 Jan 2013 13:31:43 +0000 Subject: [PATCH 384/553] Xen: properly bound buffer access when parsing cpu/*/availability At the same time reduce the local buffers to 16 bytes each. Signed-off-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/cpu_hotplug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/xen/cpu_hotplug.c b/drivers/xen/cpu_hotplug.c index 4dcfced107f5..084041d42c9a 100644 --- a/drivers/xen/cpu_hotplug.c +++ b/drivers/xen/cpu_hotplug.c @@ -25,10 +25,10 @@ static void disable_hotplug_cpu(int cpu) static int vcpu_online(unsigned int cpu) { int err; - char dir[32], state[32]; + char dir[16], state[16]; sprintf(dir, "cpu/%u", cpu); - err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state); + err = xenbus_scanf(XBT_NIL, dir, "availability", "%15s", state); if (err != 1) { if (!xen_initial_domain()) printk(KERN_ERR "XENBUS: Unable to read cpu state\n"); From 99beae6cb8f4dd5dab81a370b79c3b1085848d89 Mon Sep 17 00:00:00 2001 From: Andres Lagar-Cavilla Date: Mon, 14 Jan 2013 22:35:40 -0500 Subject: [PATCH 385/553] xen/privcmd: Fix mmap batch ioctl. 1. If any individual mapping error happens, the V1 case will mark *all* operations as failed. Fixed. 2. The err_array was allocated with kcalloc, resulting in potentially O(n) page allocations. Refactor code to not use this array. Signed-off-by: Andres Lagar-Cavilla Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/privcmd.c | 83 ++++++++++++++++++++++++------------------- 1 file changed, 47 insertions(+), 36 deletions(-) diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index 421375a9196a..ca2b00e9d558 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -258,11 +258,12 @@ struct mmap_batch_state { * -ENOENT if at least 1 -ENOENT has happened. */ int global_error; - /* An array for individual errors */ - int *err; + int version; /* User-space mfn array to store errors in the second pass for V1. */ xen_pfn_t __user *user_mfn; + /* User-space int array to store errors in the second pass for V2. */ + int __user *user_err; }; /* auto translated dom0 note: if domU being created is PV, then mfn is @@ -285,7 +286,19 @@ static int mmap_batch_fn(void *data, void *state) &cur_page); /* Store error code for second pass. */ - *(st->err++) = ret; + if (st->version == 1) { + if (ret < 0) { + /* + * V1 encodes the error codes in the 32bit top nibble of the + * mfn (with its known limitations vis-a-vis 64 bit callers). + */ + *mfnp |= (ret == -ENOENT) ? + PRIVCMD_MMAPBATCH_PAGED_ERROR : + PRIVCMD_MMAPBATCH_MFN_ERROR; + } + } else { /* st->version == 2 */ + *((int *) mfnp) = ret; + } /* And see if it affects the global_error. */ if (ret < 0) { @@ -302,20 +315,25 @@ static int mmap_batch_fn(void *data, void *state) return 0; } -static int mmap_return_errors_v1(void *data, void *state) +static int mmap_return_errors(void *data, void *state) { - xen_pfn_t *mfnp = data; struct mmap_batch_state *st = state; - int err = *(st->err++); - /* - * V1 encodes the error codes in the 32bit top nibble of the - * mfn (with its known limitations vis-a-vis 64 bit callers). - */ - *mfnp |= (err == -ENOENT) ? - PRIVCMD_MMAPBATCH_PAGED_ERROR : - PRIVCMD_MMAPBATCH_MFN_ERROR; - return __put_user(*mfnp, st->user_mfn++); + if (st->version == 1) { + xen_pfn_t mfnp = *((xen_pfn_t *) data); + if (mfnp & PRIVCMD_MMAPBATCH_MFN_ERROR) + return __put_user(mfnp, st->user_mfn++); + else + st->user_mfn++; + } else { /* st->version == 2 */ + int err = *((int *) data); + if (err) + return __put_user(err, st->user_err++); + else + st->user_err++; + } + + return 0; } /* Allocate pfns that are then mapped with gmfns from foreign domid. Update @@ -354,7 +372,6 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) struct vm_area_struct *vma; unsigned long nr_pages; LIST_HEAD(pagelist); - int *err_array = NULL; struct mmap_batch_state state; switch (version) { @@ -390,10 +407,12 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) goto out; } - err_array = kcalloc(m.num, sizeof(int), GFP_KERNEL); - if (err_array == NULL) { - ret = -ENOMEM; - goto out; + if (version == 2) { + /* Zero error array now to only copy back actual errors. */ + if (clear_user(m.err, sizeof(int) * m.num)) { + ret = -EFAULT; + goto out; + } } down_write(&mm->mmap_sem); @@ -421,7 +440,7 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) state.va = m.addr; state.index = 0; state.global_error = 0; - state.err = err_array; + state.version = version; /* mmap_batch_fn guarantees ret == 0 */ BUG_ON(traverse_pages(m.num, sizeof(xen_pfn_t), @@ -429,21 +448,14 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) up_write(&mm->mmap_sem); - if (version == 1) { - if (state.global_error) { - /* Write back errors in second pass. */ - state.user_mfn = (xen_pfn_t *)m.arr; - state.err = err_array; - ret = traverse_pages(m.num, sizeof(xen_pfn_t), - &pagelist, mmap_return_errors_v1, &state); - } else - ret = 0; - - } else if (version == 2) { - ret = __copy_to_user(m.err, err_array, m.num * sizeof(int)); - if (ret) - ret = -EFAULT; - } + if (state.global_error) { + /* Write back errors in second pass. */ + state.user_mfn = (xen_pfn_t *)m.arr; + state.user_err = m.err; + ret = traverse_pages(m.num, sizeof(xen_pfn_t), + &pagelist, mmap_return_errors, &state); + } else + ret = 0; /* If we have not had any EFAULT-like global errors then set the global * error to -ENOENT if necessary. */ @@ -451,7 +463,6 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) ret = -ENOENT; out: - kfree(err_array); free_page_list(&pagelist); return ret; From 2512f298cb9886e06938e761c9e924c8448d9ab8 Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Wed, 2 Jan 2013 22:57:11 +0000 Subject: [PATCH 386/553] xen/gntdev: fix unsafe vma access In gntdev_ioctl_get_offset_for_vaddr, we need to hold mmap_sem while calling find_vma() to avoid potentially having the result freed out from under us. Similarly, the MMU notifier functions need to synchronize with gntdev_vma_close to avoid map->vma being freed during their iteration. Signed-off-by: Daniel De Graaf Reported-by: Al Viro Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntdev.c | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 2e22df2f7a3f..cca62cc8549b 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -378,7 +378,20 @@ static void gntdev_vma_close(struct vm_area_struct *vma) struct grant_map *map = vma->vm_private_data; pr_debug("gntdev_vma_close %p\n", vma); - map->vma = NULL; + if (use_ptemod) { + struct file *file = vma->vm_file; + struct gntdev_priv *priv = file->private_data; + /* It is possible that an mmu notifier could be running + * concurrently, so take priv->lock to ensure that the vma won't + * vanishing during the unmap_grant_pages call, since we will + * spin here until that completes. Such a concurrent call will + * not do any unmapping, since that has been done prior to + * closing the vma, but it may still iterate the unmap_ops list. + */ + spin_lock(&priv->lock); + map->vma = NULL; + spin_unlock(&priv->lock); + } vma->vm_private_data = NULL; gntdev_put_map(map); } @@ -579,25 +592,31 @@ static long gntdev_ioctl_get_offset_for_vaddr(struct gntdev_priv *priv, struct ioctl_gntdev_get_offset_for_vaddr op; struct vm_area_struct *vma; struct grant_map *map; + int rv = -EINVAL; if (copy_from_user(&op, u, sizeof(op)) != 0) return -EFAULT; pr_debug("priv %p, offset for vaddr %lx\n", priv, (unsigned long)op.vaddr); + down_read(¤t->mm->mmap_sem); vma = find_vma(current->mm, op.vaddr); if (!vma || vma->vm_ops != &gntdev_vmops) - return -EINVAL; + goto out_unlock; map = vma->vm_private_data; if (!map) - return -EINVAL; + goto out_unlock; op.offset = map->index << PAGE_SHIFT; op.count = map->count; + rv = 0; - if (copy_to_user(u, &op, sizeof(op)) != 0) + out_unlock: + up_read(¤t->mm->mmap_sem); + + if (rv == 0 && copy_to_user(u, &op, sizeof(op)) != 0) return -EFAULT; - return 0; + return rv; } static long gntdev_ioctl_notify(struct gntdev_priv *priv, void __user *u) From 16a1d0225e22e4e273e6b60a21db95decde666c2 Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Wed, 2 Jan 2013 22:57:12 +0000 Subject: [PATCH 387/553] xen/gntdev: correctly unmap unlinked maps in mmu notifier If gntdev_ioctl_unmap_grant_ref is called on a range before unmapping it, the entry is removed from priv->maps and the later call to mn_invl_range_start won't find it to do the unmapping. Fix this by creating another list of freeable maps that the mmu notifier can search and use to unmap grants. Signed-off-by: Daniel De Graaf Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntdev.c | 92 ++++++++++++++++++++++++++++++-------------- 1 file changed, 63 insertions(+), 29 deletions(-) diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index cca62cc8549b..9be3e5e46d1f 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -56,10 +56,15 @@ MODULE_PARM_DESC(limit, "Maximum number of grants that may be mapped by " static atomic_t pages_mapped = ATOMIC_INIT(0); static int use_ptemod; +#define populate_freeable_maps use_ptemod struct gntdev_priv { + /* maps with visible offsets in the file descriptor */ struct list_head maps; - /* lock protects maps from concurrent changes */ + /* maps that are not visible; will be freed on munmap. + * Only populated if populate_freeable_maps == 1 */ + struct list_head freeable_maps; + /* lock protects maps and freeable_maps */ spinlock_t lock; struct mm_struct *mm; struct mmu_notifier mn; @@ -193,7 +198,7 @@ static struct grant_map *gntdev_find_map_index(struct gntdev_priv *priv, return NULL; } -static void gntdev_put_map(struct grant_map *map) +static void gntdev_put_map(struct gntdev_priv *priv, struct grant_map *map) { if (!map) return; @@ -208,6 +213,12 @@ static void gntdev_put_map(struct grant_map *map) evtchn_put(map->notify.event); } + if (populate_freeable_maps && priv) { + spin_lock(&priv->lock); + list_del(&map->next); + spin_unlock(&priv->lock); + } + if (map->pages && !use_ptemod) unmap_grant_pages(map, 0, map->count); gntdev_free_map(map); @@ -376,11 +387,11 @@ static void gntdev_vma_open(struct vm_area_struct *vma) static void gntdev_vma_close(struct vm_area_struct *vma) { struct grant_map *map = vma->vm_private_data; + struct file *file = vma->vm_file; + struct gntdev_priv *priv = file->private_data; pr_debug("gntdev_vma_close %p\n", vma); if (use_ptemod) { - struct file *file = vma->vm_file; - struct gntdev_priv *priv = file->private_data; /* It is possible that an mmu notifier could be running * concurrently, so take priv->lock to ensure that the vma won't * vanishing during the unmap_grant_pages call, since we will @@ -393,7 +404,7 @@ static void gntdev_vma_close(struct vm_area_struct *vma) spin_unlock(&priv->lock); } vma->vm_private_data = NULL; - gntdev_put_map(map); + gntdev_put_map(priv, map); } static struct vm_operations_struct gntdev_vmops = { @@ -403,33 +414,43 @@ static struct vm_operations_struct gntdev_vmops = { /* ------------------------------------------------------------------ */ +static void unmap_if_in_range(struct grant_map *map, + unsigned long start, unsigned long end) +{ + unsigned long mstart, mend; + int err; + + if (!map->vma) + return; + if (map->vma->vm_start >= end) + return; + if (map->vma->vm_end <= start) + return; + mstart = max(start, map->vma->vm_start); + mend = min(end, map->vma->vm_end); + pr_debug("map %d+%d (%lx %lx), range %lx %lx, mrange %lx %lx\n", + map->index, map->count, + map->vma->vm_start, map->vma->vm_end, + start, end, mstart, mend); + err = unmap_grant_pages(map, + (mstart - map->vma->vm_start) >> PAGE_SHIFT, + (mend - mstart) >> PAGE_SHIFT); + WARN_ON(err); +} + static void mn_invl_range_start(struct mmu_notifier *mn, struct mm_struct *mm, unsigned long start, unsigned long end) { struct gntdev_priv *priv = container_of(mn, struct gntdev_priv, mn); struct grant_map *map; - unsigned long mstart, mend; - int err; spin_lock(&priv->lock); list_for_each_entry(map, &priv->maps, next) { - if (!map->vma) - continue; - if (map->vma->vm_start >= end) - continue; - if (map->vma->vm_end <= start) - continue; - mstart = max(start, map->vma->vm_start); - mend = min(end, map->vma->vm_end); - pr_debug("map %d+%d (%lx %lx), range %lx %lx, mrange %lx %lx\n", - map->index, map->count, - map->vma->vm_start, map->vma->vm_end, - start, end, mstart, mend); - err = unmap_grant_pages(map, - (mstart - map->vma->vm_start) >> PAGE_SHIFT, - (mend - mstart) >> PAGE_SHIFT); - WARN_ON(err); + unmap_if_in_range(map, start, end); + } + list_for_each_entry(map, &priv->freeable_maps, next) { + unmap_if_in_range(map, start, end); } spin_unlock(&priv->lock); } @@ -458,6 +479,15 @@ static void mn_release(struct mmu_notifier *mn, err = unmap_grant_pages(map, /* offset */ 0, map->count); WARN_ON(err); } + list_for_each_entry(map, &priv->freeable_maps, next) { + if (!map->vma) + continue; + pr_debug("map %d+%d (%lx %lx)\n", + map->index, map->count, + map->vma->vm_start, map->vma->vm_end); + err = unmap_grant_pages(map, /* offset */ 0, map->count); + WARN_ON(err); + } spin_unlock(&priv->lock); } @@ -479,6 +509,7 @@ static int gntdev_open(struct inode *inode, struct file *flip) return -ENOMEM; INIT_LIST_HEAD(&priv->maps); + INIT_LIST_HEAD(&priv->freeable_maps); spin_lock_init(&priv->lock); if (use_ptemod) { @@ -513,8 +544,9 @@ static int gntdev_release(struct inode *inode, struct file *flip) while (!list_empty(&priv->maps)) { map = list_entry(priv->maps.next, struct grant_map, next); list_del(&map->next); - gntdev_put_map(map); + gntdev_put_map(NULL /* already removed */, map); } + WARN_ON(!list_empty(&priv->freeable_maps)); if (use_ptemod) mmu_notifier_unregister(&priv->mn, priv->mm); @@ -542,14 +574,14 @@ static long gntdev_ioctl_map_grant_ref(struct gntdev_priv *priv, if (unlikely(atomic_add_return(op.count, &pages_mapped) > limit)) { pr_debug("can't map: over limit\n"); - gntdev_put_map(map); + gntdev_put_map(NULL, map); return err; } if (copy_from_user(map->grants, &u->refs, sizeof(map->grants[0]) * op.count) != 0) { - gntdev_put_map(map); - return err; + gntdev_put_map(NULL, map); + return -EFAULT; } spin_lock(&priv->lock); @@ -578,11 +610,13 @@ static long gntdev_ioctl_unmap_grant_ref(struct gntdev_priv *priv, map = gntdev_find_map_index(priv, op.index >> PAGE_SHIFT, op.count); if (map) { list_del(&map->next); + if (populate_freeable_maps) + list_add_tail(&map->next, &priv->freeable_maps); err = 0; } spin_unlock(&priv->lock); if (map) - gntdev_put_map(map); + gntdev_put_map(priv, map); return err; } @@ -797,7 +831,7 @@ out_unlock_put: out_put_map: if (use_ptemod) map->vma = NULL; - gntdev_put_map(map); + gntdev_put_map(priv, map); return err; } From 1affa98d23c0188fdd4433512489be753a25bb23 Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Wed, 2 Jan 2013 17:57:13 -0500 Subject: [PATCH 388/553] xen/gntdev: remove erronous use of copy_to_user Since there is now a mapping of granted pages in kernel address space in both PV and HVM, use it for UNMAP_NOTIFY_CLEAR_BYTE instead of accessing memory via copy_to_user and triggering sleep-in-atomic warnings. Signed-off-by: Daniel De Graaf Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntdev.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 9be3e5e46d1f..3c8803feba26 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -312,17 +312,10 @@ static int __unmap_grant_pages(struct grant_map *map, int offset, int pages) if (map->notify.flags & UNMAP_NOTIFY_CLEAR_BYTE) { int pgno = (map->notify.addr >> PAGE_SHIFT); - if (pgno >= offset && pgno < offset + pages && use_ptemod) { - void __user *tmp = (void __user *) - map->vma->vm_start + map->notify.addr; - err = copy_to_user(tmp, &err, 1); - if (err) - return -EFAULT; - map->notify.flags &= ~UNMAP_NOTIFY_CLEAR_BYTE; - } else if (pgno >= offset && pgno < offset + pages) { - uint8_t *tmp = kmap(map->pages[pgno]); + if (pgno >= offset && pgno < offset + pages) { + /* No need for kmap, pages are in lowmem */ + uint8_t *tmp = pfn_to_kaddr(page_to_pfn(map->pages[pgno])); tmp[map->notify.addr & (PAGE_SIZE-1)] = 0; - kunmap(map->pages[pgno]); map->notify.flags &= ~UNMAP_NOTIFY_CLEAR_BYTE; } } From a6833214cfc6fa8a7c59426af77794cc190c6cfc Mon Sep 17 00:00:00 2001 From: Steffen Trumtrar Date: Thu, 13 Dec 2012 14:27:43 +0100 Subject: [PATCH 389/553] mxs: uart: fix setting RTS from software With the patch "serial: mxs-auart: fix the wrong RTS hardware flow control" the mainline mxs-uart driver now sets RTSEN only when hardware flow control is enabled via software. It is not possible any longer to set RTS manually via software. However, the manual modification is a valid operation. Regain the possibility to set RTS via software and only set RTSEN when hardware flow control is explicitly enabled via settermios cflag CRTSCTS. Signed-off-by: Steffen Trumtrar Cc: stable Reviewed-by: Huang Shijie Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mxs-auart.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 6db23b035efe..9f63f8890a61 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -412,10 +412,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) u32 ctrl = readl(u->membase + AUART_CTRL2); - ctrl &= ~AUART_CTRL2_RTSEN; + ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS); if (mctrl & TIOCM_RTS) { if (tty_port_cts_enabled(&u->state->port)) ctrl |= AUART_CTRL2_RTSEN; + else + ctrl |= AUART_CTRL2_RTS; } s->ctrl = mctrl; From 87b8bed2ce9394870a87e4fb2aef6752b2bd837d Mon Sep 17 00:00:00 2001 From: "fabio.estevam@freescale.com" Date: Mon, 7 Jan 2013 23:11:06 -0200 Subject: [PATCH 390/553] serial: mxs-auart: Index is unsigned Fix the following warning when building with W=1 option: drivers/tty/serial/mxs-auart.c: In function 'mxs_auart_tx_chars': drivers/tty/serial/mxs-auart.c:272:10: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mxs-auart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 9f63f8890a61..e55615eb34ad 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -253,7 +253,7 @@ static void mxs_auart_tx_chars(struct mxs_auart_port *s) struct circ_buf *xmit = &s->port.state->xmit; if (auart_dma_enabled(s)) { - int i = 0; + u32 i = 0; int size; void *buffer = s->tx_dma_buf; From a6dd114e16cbc4410049a90a8a67b967333d108d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 2 Dec 2012 05:10:44 -0500 Subject: [PATCH 391/553] tty: serial: vt8500: fix return value check in vt8500_serial_probe() In case of error, function of_clk_get() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Acked-by: Tony Prisk Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/vt8500_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 8fd181436a6b..d5ed9f613005 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -604,7 +604,7 @@ static int vt8500_serial_probe(struct platform_device *pdev) vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0); - if (vt8500_port->clk) { + if (!IS_ERR(vt8500_port->clk)) { vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk); } else { /* use the default of 24Mhz if not specified and warn */ From 4f7d67d0de0f0728ed258426a62ab555191cdfc8 Mon Sep 17 00:00:00 2001 From: Matt Schulte Date: Thu, 6 Dec 2012 22:19:58 -0600 Subject: [PATCH 392/553] tty/8250: pbn_b0_8_1152000_200 is supposed to be an 8 port definition tty/8250: pbn_b0_8_1152000_200 is supposed to be an 8 port definition Signed-off-by: Matt Schulte Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 26b9dc012ed0..bf2f1a0b9ae7 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -2246,7 +2246,7 @@ static struct pciserial_board pci_boards[] = { [pbn_b0_8_1152000_200] = { .flags = FL_BASE0, - .num_ports = 2, + .num_ports = 8, .base_baud = 1152000, .uart_offset = 0x200, }, From b7b9041b208d09c114d9d30ff1b7f860b7765f45 Mon Sep 17 00:00:00 2001 From: Matt Schulte Date: Thu, 6 Dec 2012 22:19:59 -0600 Subject: [PATCH 393/553] tty/8250: The correct device id for this card is 0x0022 The correct device id for this card is 0x0022 Signed-off-by: Matt Schulte Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index bf2f1a0b9ae7..8a2c3d934187 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1301,9 +1301,9 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_VENDOR_ID_AGESTAR 0x5372 #define PCI_DEVICE_ID_AGESTAR_9375 0x6872 #define PCI_VENDOR_ID_ASIX 0x9710 -#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0019 #define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020 #define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 +#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ From 014b9b4ce84281ccb3d723c792bed19815f3571a Mon Sep 17 00:00:00 2001 From: chao bi Date: Wed, 12 Dec 2012 11:40:56 +0800 Subject: [PATCH 394/553] serial:ifx6x60:Delete SPI timer when shut down port When shut down SPI port, it's possible that MRDY has been asserted and a SPI timer was activated waiting for SRDY assert, in the case, it needs to delete this timer. Signed-off-by: Chen Jun Signed-off-by: channing Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ifx6x60.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 675d94ab0aff..7eed3235dad4 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -637,6 +637,7 @@ static void ifx_port_shutdown(struct tty_port *port) clear_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags); mrdy_set_low(ifx_dev); + del_timer(&ifx_dev->spi_timer); clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); tasklet_kill(&ifx_dev->io_work_tasklet); } From d55bf532d72b3cfdfe84e696ace995067324c96c Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 15 Jan 2013 22:40:26 -0500 Subject: [PATCH 395/553] Revert "xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic." This reverts commit 41bd956de3dfdc3a43708fe2e0c8096c69064a1e. The fix is incorrect and not appropiate for the latest kernels. In fact it _causes_ the BUG: scheduling while atomic while doing vCPU hotplug. Suggested-by: Wei Liu Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/smp.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 4f7d2599b484..34bc4cee8887 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -432,13 +432,6 @@ static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */ play_dead_common(); HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL); cpu_bringup(); - /* - * Balance out the preempt calls - as we are running in cpu_idle - * loop which has been called at bootup from cpu_bringup_and_idle. - * The cpucpu_bringup_and_idle called cpu_bringup which made a - * preempt_disable() So this preempt_enable will balance it out. - */ - preempt_enable(); } #else /* !CONFIG_HOTPLUG_CPU */ From 2eaa865ffd66ca2e5a841e8c756d75f89e3482ae Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Mon, 31 Dec 2012 13:42:45 -0800 Subject: [PATCH 396/553] serial: samsung: remove redundant setting of line config during port reset The setting of uart line control configuration in s3c24xx_serial_resetport is can be removed since the 'set_termios' call will overwrite any ULCON register setting which s3c24xx_serial_resetport does. Acked-by: Kukjin Kim Signed-off-by: Thomas Abraham Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 12e5249d053e..e514b3a4dc57 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1006,7 +1006,6 @@ static void s3c24xx_serial_resetport(struct uart_port *port, ucon &= ucon_mask; wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); /* reset both fifos */ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); From 68e56cb3a068f9c30971c6117fbbd1e32918e49e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 14 Jan 2013 20:09:26 +0100 Subject: [PATCH 397/553] tty: 8250_dw: Fix inverted arguments to serial_out in IRQ handler Signed-off-by: Maxime Ripard Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 1d0dba2d562d..096d2ef48b32 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -79,7 +79,7 @@ static int dw8250_handle_irq(struct uart_port *p) } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) { /* Clear the USR and write the LCR again. */ (void)p->serial_in(p, UART_USR); - p->serial_out(p, d->last_lcr, UART_LCR); + p->serial_out(p, UART_LCR, d->last_lcr); return 1; } From 5dd070d21e2cb34b4162d564d73cca3591f94389 Mon Sep 17 00:00:00 2001 From: channing Date: Wed, 16 Jan 2013 13:14:20 +0800 Subject: [PATCH 398/553] serial:ifx6x60:Keep word size accordance with SPI controller As protocol driver, IFX SPI driver initiate to setup SPI master with default SPI word size as 16 bit/word, however, SPI master may not adopt this default value due to SPI controller's capability, it might choose an available value by itself and set it to spi_device.bits_per_word. In order to keep align with Controller, IFX driver should make use of this value during SPI transfer, but the default one. Signed-off-by: Chen Jun Signed-off-by: channing Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ifx6x60.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 7eed3235dad4..8cb6d8d66a13 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -811,7 +811,8 @@ static void ifx_spi_io(unsigned long data) ifx_dev->spi_xfer.cs_change = 0; ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz; /* ifx_dev->spi_xfer.speed_hz = 390625; */ - ifx_dev->spi_xfer.bits_per_word = spi_bpw; + ifx_dev->spi_xfer.bits_per_word = + ifx_dev->spi_dev->bits_per_word; ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer; ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer; From f30d26e468322b50d5e376bec40658683aff8ece Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Wed, 16 Jan 2013 10:53:40 +0200 Subject: [PATCH 399/553] drm/i915/eDP: do not write power sequence registers for ghost eDP Some machines detect an eDP port even if it's not really there, and eDP initialization has a fail path for this. Typically such machines have an LVDS display instead. A regression introduced in commit 82ed61fa1a4e08d5f9e86fb1b715b50ed678b6ac Author: Daniel Vetter Date: Sat Oct 20 20:57:41 2012 +0200 drm/i915: make edp panel power sequence setup more robust updated the power sequence registers PCH_PP_ON_DELAYS, PCH_PP_OFF_DELAYS, and PCH_PP_DIVISOR also in the ghost eDP case, messing up the LVDS display. Split the power sequencer initialization into two, delaying the register updates until after we know the eDP is real. Note: Keep the PP_CONTROL unlocking in the first part, even if it does not update registers, per the commit message of the above mentioned commit. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52601 Reported-and-tested-by: Ryan Coe Signed-off-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 47 ++++++++++++++++++++++----------- 1 file changed, 32 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 1b63d55318a0..fb3715b4b09d 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -2579,7 +2579,8 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect static void intel_dp_init_panel_power_sequencer(struct drm_device *dev, - struct intel_dp *intel_dp) + struct intel_dp *intel_dp, + struct edp_power_seq *out) { struct drm_i915_private *dev_priv = dev->dev_private; struct edp_power_seq cur, vbt, spec, final; @@ -2650,16 +2651,35 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev, intel_dp->panel_power_cycle_delay = get_delay(t11_t12); #undef get_delay + DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n", + intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay, + intel_dp->panel_power_cycle_delay); + + DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", + intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); + + if (out) + *out = final; +} + +static void +intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, + struct intel_dp *intel_dp, + struct edp_power_seq *seq) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp_on, pp_off, pp_div; + /* And finally store the new values in the power sequencer. */ - pp_on = (final.t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) | - (final.t8 << PANEL_LIGHT_ON_DELAY_SHIFT); - pp_off = (final.t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) | - (final.t10 << PANEL_POWER_DOWN_DELAY_SHIFT); + pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) | + (seq->t8 << PANEL_LIGHT_ON_DELAY_SHIFT); + pp_off = (seq->t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) | + (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT); /* Compute the divisor for the pp clock, simply match the Bspec * formula. */ pp_div = ((100 * intel_pch_rawclk(dev))/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT; - pp_div |= (DIV_ROUND_UP(final.t11_t12, 1000) + pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000) << PANEL_POWER_CYCLE_DELAY_SHIFT); /* Haswell doesn't have any port selection bits for the panel @@ -2675,14 +2695,6 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev, I915_WRITE(PCH_PP_OFF_DELAYS, pp_off); I915_WRITE(PCH_PP_DIVISOR, pp_div); - - DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n", - intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay, - intel_dp->panel_power_cycle_delay); - - DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", - intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); - DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n", I915_READ(PCH_PP_ON_DELAYS), I915_READ(PCH_PP_OFF_DELAYS), @@ -2699,6 +2711,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, struct drm_device *dev = intel_encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_display_mode *fixed_mode = NULL; + struct edp_power_seq power_seq = { 0 }; enum port port = intel_dig_port->port; const char *name = NULL; int type; @@ -2771,7 +2784,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, } if (is_edp(intel_dp)) - intel_dp_init_panel_power_sequencer(dev, intel_dp); + intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); intel_dp_i2c_init(intel_dp, intel_connector, name); @@ -2798,6 +2811,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, return; } + /* We now know it's not a ghost, init power sequence regs. */ + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, + &power_seq); + ironlake_edp_panel_vdd_on(intel_dp); edid = drm_get_edid(connector, &intel_dp->adapter); if (edid) { From 035688d9c64c61957dd272a1e773f27b0143704d Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 24 Dec 2012 20:04:20 -0800 Subject: [PATCH 400/553] sh: ecovec: add sample amixer settings FSI - DA7210 needs amixer settings to use it. This patch adds quick setting guide Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 3fede4556c91..a0fa5791cd44 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -70,6 +70,16 @@ * OFF-ON : MMC */ +/* + * FSI - DA7210 + * + * it needs amixer settings for playing + * + * amixer set 'HeadPhone' 80 + * amixer set 'Out Mixer Left DAC Left' on + * amixer set 'Out Mixer Right DAC Right' on + */ + /* Heartbeat */ static unsigned char led_pos[] = { 0, 1, 2, 3 }; From 262b6d363fcff16359c93bd58c297f961f6e6273 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 15 Jan 2013 16:17:54 +0000 Subject: [PATCH 401/553] drm/i915: Invalidate the relocation presumed_offsets along the slow path In the slow path, we are forced to copy the relocations prior to acquiring the struct mutex in order to handle pagefaults. We forgo copying the new offsets back into the relocation entries in order to prevent a recursive locking bug should we trigger a pagefault whilst holding the mutex for the reservations of the execbuffer. Therefore, we need to reset the presumed_offsets just in case the objects are rebound back into their old locations after relocating for this exexbuffer - if that were to happen we would assume the relocations were valid and leave the actual pointers to the kernels dangling, instant hang. Fixes regression from commit bcf50e2775bbc3101932d8e4ab8c7902aa4163b4 Author: Chris Wilson Date: Sun Nov 21 22:07:12 2010 +0000 drm/i915: Handle pagefaults in execbuffer user relocations Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55984 Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index d6a994a07393..26d08bb58218 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -539,6 +539,8 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, total = 0; for (i = 0; i < count; i++) { struct drm_i915_gem_relocation_entry __user *user_relocs; + u64 invalid_offset = (u64)-1; + int j; user_relocs = (void __user *)(uintptr_t)exec[i].relocs_ptr; @@ -549,6 +551,25 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, goto err; } + /* As we do not update the known relocation offsets after + * relocating (due to the complexities in lock handling), + * we need to mark them as invalid now so that we force the + * relocation processing next time. Just in case the target + * object is evicted and then rebound into its old + * presumed_offset before the next execbuffer - if that + * happened we would make the mistake of assuming that the + * relocations were valid. + */ + for (j = 0; j < exec[i].relocation_count; j++) { + if (copy_to_user(&user_relocs[j].presumed_offset, + &invalid_offset, + sizeof(invalid_offset))) { + ret = -EFAULT; + mutex_lock(&dev->struct_mutex); + goto err; + } + } + reloc_offset[i] = total; total += exec[i].relocation_count; } From ed4f20943cd4c7b55105c04daedf8d63ab6d499c Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 14 Jan 2013 16:55:55 +0100 Subject: [PATCH 402/553] s390/time: fix sched_clock() overflow Converting a 64 Bit TOD format value to nanoseconds means that the value must be divided by 4.096. In order to achieve that we multiply with 125 and divide by 512. When used within sched_clock() this triggers an overflow after appr. 417 days. Resulting in a sched_clock() return value that is much smaller than previously and therefore may cause all sort of weird things in subsystems that rely on a monotonic sched_clock() behaviour. To fix this implement a tod_to_ns() helper function which converts TOD values without overflow and call this function from both places that open coded the conversion: sched_clock() and kvm_s390_handle_wait(). Cc: stable@kernel.org Reviewed-by: Martin Schwidefsky Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/timex.h | 28 ++++++++++++++++++++++++++++ arch/s390/kernel/time.c | 2 +- arch/s390/kvm/interrupt.c | 2 +- 3 files changed, 30 insertions(+), 2 deletions(-) diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h index fba4d66788a2..4c060bb5b8ea 100644 --- a/arch/s390/include/asm/timex.h +++ b/arch/s390/include/asm/timex.h @@ -128,4 +128,32 @@ static inline unsigned long long get_clock_monotonic(void) return get_clock_xt() - sched_clock_base_cc; } +/** + * tod_to_ns - convert a TOD format value to nanoseconds + * @todval: to be converted TOD format value + * Returns: number of nanoseconds that correspond to the TOD format value + * + * Converting a 64 Bit TOD format value to nanoseconds means that the value + * must be divided by 4.096. In order to achieve that we multiply with 125 + * and divide by 512: + * + * ns = (todval * 125) >> 9; + * + * In order to avoid an overflow with the multiplication we can rewrite this. + * With a split todval == 2^32 * th + tl (th upper 32 bits, tl lower 32 bits) + * we end up with + * + * ns = ((2^32 * th + tl) * 125 ) >> 9; + * -> ns = (2^23 * th * 125) + ((tl * 125) >> 9); + * + */ +static inline unsigned long long tod_to_ns(unsigned long long todval) +{ + unsigned long long ns; + + ns = ((todval >> 32) << 23) * 125; + ns += ((todval & 0xffffffff) * 125) >> 9; + return ns; +} + #endif diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index aff0e350d776..a5f4f5a1d24b 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -63,7 +63,7 @@ static DEFINE_PER_CPU(struct clock_event_device, comparators); */ unsigned long long notrace __kprobes sched_clock(void) { - return (get_clock_monotonic() * 125) >> 9; + return tod_to_ns(get_clock_monotonic()); } /* diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index c30615e605ac..82c481ddef76 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -408,7 +408,7 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu) return 0; } - sltime = ((vcpu->arch.sie_block->ckc - now)*125)>>9; + sltime = tod_to_ns(vcpu->arch.sie_block->ckc - now); hrtimer_start(&vcpu->arch.ckc_timer, ktime_set (0, sltime) , HRTIMER_MODE_REL); VCPU_EVENT(vcpu, 5, "enabled wait via clock comparator: %llx ns", sltime); From 509d97b6f91b51e180ba26ddb1e2b7f6dfa80cba Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Tue, 15 Jan 2013 19:02:01 +0100 Subject: [PATCH 403/553] s390/chsc: fix SEI usage cbc0dd1 "s390/pci: CHSC PCI support for error and availability events" introduced a new SEI notification type as part of pci support. The way SEI was called with nt2 and nt0 consecutive broke the nt0 stuff used for channel subsystem notifications. The reason why this was broken with the mentioned patch is that you cannot selectively disable type 0 notifications (so even when asked for type 2 only, type 0 could be presented). The way to do it is to tell SEI which types of notification you can process and -this is the important part- look at the SEI result which notification type you actually received. Reviewed-by: Peter Oberparleiter Tested-by: Michael Holzheu Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/chsc.c | 31 ++++++++++++------------------- 1 file changed, 12 insertions(+), 19 deletions(-) diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index 68e80e2734a4..10729bbceced 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -283,7 +283,7 @@ struct chsc_sei_nt2_area { u8 ccdf[PAGE_SIZE - 24 - 56]; /* content-code dependent field */ } __packed; -#define CHSC_SEI_NT0 0ULL +#define CHSC_SEI_NT0 (1ULL << 63) #define CHSC_SEI_NT2 (1ULL << 61) struct chsc_sei { @@ -291,7 +291,8 @@ struct chsc_sei { u32 reserved1; u64 ntsm; /* notification type mask */ struct chsc_header response; - u32 reserved2; + u32 :24; + u8 nt; union { struct chsc_sei_nt0_area nt0_area; struct chsc_sei_nt2_area nt2_area; @@ -496,17 +497,17 @@ static int __chsc_process_crw(struct chsc_sei *sei, u64 ntsm) css_schedule_eval_all(); } - switch (sei->ntsm) { - case CHSC_SEI_NT0: + switch (sei->nt) { + case 0: chsc_process_sei_nt0(&sei->u.nt0_area); - return 1; - case CHSC_SEI_NT2: + break; + case 2: chsc_process_sei_nt2(&sei->u.nt2_area); - return 1; + break; default: - CIO_CRW_EVENT(2, "chsc: unhandled nt (nt=%08Lx)\n", - sei->ntsm); - return 0; + CIO_CRW_EVENT(2, "chsc: unhandled nt=%d\n", + sei->nt); + break; } } else { CIO_CRW_EVENT(2, "chsc: sei failed (rc=%04x)\n", @@ -537,15 +538,7 @@ static void chsc_process_crw(struct crw *crw0, struct crw *crw1, int overflow) sei = sei_page; CIO_TRACE_EVENT(2, "prcss"); - - /* - * The ntsm does not allow to select NT0 and NT2 together. We need to - * first check for NT2, than additionally for NT0... - */ -#ifdef CONFIG_PCI - if (!__chsc_process_crw(sei, CHSC_SEI_NT2)) -#endif - __chsc_process_crw(sei, CHSC_SEI_NT0); + __chsc_process_crw(sei, CHSC_SEI_NT0 | CHSC_SEI_NT2); } void chsc_chp_online(struct chp_id chpid) From f32ca3db7f0b05a88edf37ccb00e262290a213e7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 17 Jan 2013 00:33:36 +0900 Subject: [PATCH 404/553] regmap: debugfs: Fix seeking from the cache We don't want to bomb out early if we failed to get the cache any more, just soldier on instead and we won't get confused and always return the first block. Reported-by: Philipp Zabel --- drivers/base/regmap/regmap-debugfs.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index 46a213a596e2..d9a6c94ce423 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -121,8 +121,6 @@ static unsigned int regmap_debugfs_get_dump_start(struct regmap *map, c->max = p - 1; list_add_tail(&c->list, &map->debugfs_off_cache); - } else { - return base; } /* From 568dca15aa2a0f4ddee255894ec393a159f13147 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 14 Jan 2013 19:50:42 +0100 Subject: [PATCH 405/553] ARM: 7627/1: Predicate preempt logic on PREEMP_COUNT not PREEMPT alone Patrik Kluba reports that the preempt count becomes invalid due to the preempt_enable() call being unbalanced with a preempt_disable() call in the vfp assembly routines. This happens because preempt_enable() and preempt_disable() update preempt counts under PREEMPT_COUNT=y but the vfp assembly routines do so under PREEMPT=y. In a configuration where PREEMPT=n and DEBUG_ATOMIC_SLEEP=y, PREEMPT_COUNT=y and so the preempt_enable() call in VFP_bounce() keeps subtracting from the preempt count until it goes negative. Fix this by always using PREEMPT_COUNT to decided when to update preempt counts in the ARM assembly code. Signed-off-by: Stephen Boyd Reported-by: Patrik Kluba Tested-by: Patrik Kluba Cc: # 2.6.30 Signed-off-by: Russell King --- arch/arm/vfp/entry.S | 6 +++--- arch/arm/vfp/vfphw.S | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index cc926c985981..323ce1a62bbf 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -22,7 +22,7 @@ @ IRQs disabled. @ ENTRY(do_vfp) -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_COUNT ldr r4, [r10, #TI_PREEMPT] @ get preempt count add r11, r4, #1 @ increment it str r11, [r10, #TI_PREEMPT] @@ -35,7 +35,7 @@ ENTRY(do_vfp) ENDPROC(do_vfp) ENTRY(vfp_null_entry) -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_COUNT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it @@ -53,7 +53,7 @@ ENDPROC(vfp_null_entry) __INIT ENTRY(vfp_testing_entry) -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_COUNT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index ea0349f63586..dd5e56f95f3f 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -168,7 +168,7 @@ vfp_hw_state_valid: @ else it's one 32-bit instruction, so @ always subtract 4 from the following @ instruction address. -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_COUNT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it @@ -192,7 +192,7 @@ look_for_VFP_exceptions: @ not recognised by VFP DBGSTR "not VFP" -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_COUNT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it From 6f16f4998f98e42e3f2dedf663cfb691ff0324af Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 15 Jan 2013 18:51:32 +0100 Subject: [PATCH 406/553] ARM: 7628/1: head.S: map one extra section for the ATAG/DTB area We currently use a temporary 1MB section aligned to a 1MB boundary for mapping the provided device tree until the final page table is created. However, if the device tree happens to cross that 1MB boundary, the end of it remains unmapped and the kernel crashes when it attempts to access it. Given no restriction on the location of that DTB, it could end up with only a few bytes mapped at the end of a section. Solve this issue by mapping two consecutive sections. Signed-off-by: Nicolas Pitre Tested-by: Sascha Hauer Tested-by: Tomasz Figa Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/kernel/head.S | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 4eee351f4668..61fcb18c7e5b 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -246,6 +246,7 @@ __create_page_tables: /* * Then map boot params address in r2 if specified. + * We map 2 sections in case the ATAGs/DTB crosses a section boundary. */ mov r0, r2, lsr #SECTION_SHIFT movs r0, r0, lsl #SECTION_SHIFT @@ -253,6 +254,8 @@ __create_page_tables: addne r3, r3, #PAGE_OFFSET addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) orrne r6, r7, r0 + strne r6, [r3], #1 << PMD_ORDER + addne r6, r6, #1 << SECTION_SHIFT strne r6, [r3] #ifdef CONFIG_DEBUG_LL From 774a1221e862b343388347bac9b318767336b20b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 15 Jan 2013 18:52:51 -0800 Subject: [PATCH 407/553] module, async: async_synchronize_full() on module init iff async is used If the default iosched is built as module, the kernel may deadlock while trying to load the iosched module on device probe if the probing was running off async. This is because async_synchronize_full() at the end of module init ends up waiting for the async job which initiated the module loading. async A modprobe 1. finds a device 2. registers the block device 3. request_module(default iosched) 4. modprobe in userland 5. load and init module 6. async_synchronize_full() Async A waits for modprobe to finish in request_module() and modprobe waits for async A to finish in async_synchronize_full(). Because there's no easy to track dependency once control goes out to userland, implementing properly nested flushing is difficult. For now, make module init perform async_synchronize_full() iff module init has queued async jobs as suggested by Linus. This avoids the described deadlock because iosched module doesn't use async and thus wouldn't invoke async_synchronize_full(). This is hacky and incomplete. It will deadlock if async module loading nests; however, this works around the known problem case and seems to be the best of bad options. For more details, please refer to the following thread. http://thread.gmane.org/gmane.linux.kernel/1420814 Signed-off-by: Tejun Heo Reported-by: Alex Riesen Tested-by: Ming Lei Tested-by: Alex Riesen Cc: Arjan van de Ven Cc: Jens Axboe Signed-off-by: Linus Torvalds --- include/linux/sched.h | 1 + kernel/async.c | 3 +++ kernel/module.c | 27 +++++++++++++++++++++++++-- 3 files changed, 29 insertions(+), 2 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 206bb089c06b..6fc8f45de4e9 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1810,6 +1810,7 @@ extern void thread_group_cputime_adjusted(struct task_struct *p, cputime_t *ut, #define PF_MEMALLOC 0x00000800 /* Allocating memory */ #define PF_NPROC_EXCEEDED 0x00001000 /* set_user noticed that RLIMIT_NPROC was exceeded */ #define PF_USED_MATH 0x00002000 /* if unset the fpu must be initialized before use */ +#define PF_USED_ASYNC 0x00004000 /* used async_schedule*(), used by module init */ #define PF_NOFREEZE 0x00008000 /* this thread should not be frozen */ #define PF_FROZEN 0x00010000 /* frozen for system suspend */ #define PF_FSTRANS 0x00020000 /* inside a filesystem transaction */ diff --git a/kernel/async.c b/kernel/async.c index 9d3118384858..a1d585c351d6 100644 --- a/kernel/async.c +++ b/kernel/async.c @@ -196,6 +196,9 @@ static async_cookie_t __async_schedule(async_func_ptr *ptr, void *data, struct a atomic_inc(&entry_count); spin_unlock_irqrestore(&async_lock, flags); + /* mark that this task has queued an async job, used by module init */ + current->flags |= PF_USED_ASYNC; + /* schedule for execution */ queue_work(system_unbound_wq, &entry->work); diff --git a/kernel/module.c b/kernel/module.c index 250092c1d57d..b10b048367e1 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -3013,6 +3013,12 @@ static int do_init_module(struct module *mod) { int ret = 0; + /* + * We want to find out whether @mod uses async during init. Clear + * PF_USED_ASYNC. async_schedule*() will set it. + */ + current->flags &= ~PF_USED_ASYNC; + blocking_notifier_call_chain(&module_notify_list, MODULE_STATE_COMING, mod); @@ -3058,8 +3064,25 @@ static int do_init_module(struct module *mod) blocking_notifier_call_chain(&module_notify_list, MODULE_STATE_LIVE, mod); - /* We need to finish all async code before the module init sequence is done */ - async_synchronize_full(); + /* + * We need to finish all async code before the module init sequence + * is done. This has potential to deadlock. For example, a newly + * detected block device can trigger request_module() of the + * default iosched from async probing task. Once userland helper + * reaches here, async_synchronize_full() will wait on the async + * task waiting on request_module() and deadlock. + * + * This deadlock is avoided by perfomring async_synchronize_full() + * iff module init queued any async jobs. This isn't a full + * solution as it will deadlock the same if module loading from + * async jobs nests more than once; however, due to the various + * constraints, this hack seems to be the best option for now. + * Please refer to the following thread for details. + * + * http://thread.gmane.org/gmane.linux.kernel/1420814 + */ + if (current->flags & PF_USED_ASYNC) + async_synchronize_full(); mutex_lock(&module_mutex); /* Drop initial reference. */ From 4adf07fba3bd64472921a01aae0e116f9f948b77 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 15 Jan 2013 10:43:43 +0200 Subject: [PATCH 408/553] firmware: make sure the fw file size is not 0 If the requested firmware file size is 0 bytes in the filesytem, we will try to vmalloc(0), which causes a warning: vmalloc: allocation failure: 0 bytes kworker/1:1: page allocation failure: order:0, mode:0xd2 __vmalloc_node_range+0x164/0x208 __vmalloc_node+0x4c/0x58 vmalloc+0x38/0x44 _request_firmware_load+0x220/0x6b0 request_firmware+0x64/0xc8 wl18xx_setup+0xb4/0x570 [wl18xx] wlcore_nvs_cb+0x64/0x9f8 [wlcore] request_firmware_work_func+0x94/0x100 process_one_work+0x1d0/0x750 worker_thread+0x184/0x4ac kthread+0xb4/0xc0 To fix this, check whether the file size is less than or equal to zero in fw_read_file_contents(). Cc: stable [3.7] Signed-off-by: Luciano Coelho Acked-by: Ming Lei Signed-off-by: Linus Torvalds --- drivers/base/firmware_class.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index d81460309182..b392b353be39 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -305,7 +305,7 @@ static bool fw_read_file_contents(struct file *file, struct firmware_buf *fw_buf char *buf; size = fw_file_size(file); - if (size < 0) + if (size <= 0) return false; buf = vmalloc(size); if (!buf) From c4ef9bc4f7e1807d499d3d427712df9f8aa2dcbb Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 15 Jan 2013 14:19:45 -0600 Subject: [PATCH 409/553] MAINTAINERS: update email address for Timur Tabi Timur Tabi no longer works for Freescale, so update the email address and status for all of his maintained projects. Also mark the QE library as orphaned, for lack of interest in maintaining it. The CS4270 driver is marked as "Odd Fixes" because appropriate hardware is no longer available. Signed-off-by: Timur Tabi Signed-off-by: Linus Torvalds --- MAINTAINERS | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index cd5b31fec01c..3105c4868c4e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1972,9 +1972,9 @@ S: Maintained F: drivers/usb/host/ohci-ep93xx.c CIRRUS LOGIC CS4270 SOUND DRIVER -M: Timur Tabi +M: Timur Tabi L: alsa-devel@alsa-project.org (moderated for non-subscribers) -S: Supported +S: Odd Fixes F: sound/soc/codecs/cs4270* CLEANCACHE API @@ -3191,9 +3191,9 @@ F: include/uapi/video/ F: include/uapi/linux/fb.h FREESCALE DIU FRAMEBUFFER DRIVER -M: Timur Tabi +M: Timur Tabi L: linux-fbdev@vger.kernel.org -S: Supported +S: Maintained F: drivers/video/fsl-diu-fb.* FREESCALE DMA DRIVER @@ -3228,9 +3228,8 @@ F: drivers/net/ethernet/freescale/fs_enet/ F: include/linux/fs_enet_pd.h FREESCALE QUICC ENGINE LIBRARY -M: Timur Tabi L: linuxppc-dev@lists.ozlabs.org -S: Supported +S: Orphan F: arch/powerpc/sysdev/qe_lib/ F: arch/powerpc/include/asm/*qe.h @@ -3249,16 +3248,16 @@ S: Maintained F: drivers/net/ethernet/freescale/ucc_geth* FREESCALE QUICC ENGINE UCC UART DRIVER -M: Timur Tabi +M: Timur Tabi L: linuxppc-dev@lists.ozlabs.org -S: Supported +S: Maintained F: drivers/tty/serial/ucc_uart.c FREESCALE SOC SOUND DRIVERS -M: Timur Tabi +M: Timur Tabi L: alsa-devel@alsa-project.org (moderated for non-subscribers) L: linuxppc-dev@lists.ozlabs.org -S: Supported +S: Maintained F: sound/soc/fsl/fsl* F: sound/soc/fsl/mpc8610_hpcd.c From 1bea07f16da0d77689cda7abe73939dd1dfdea22 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 14 Jan 2013 19:53:54 +0100 Subject: [PATCH 410/553] ARM: sunxi: Use the Synosys APB UART instead of ns8250 The UART controller used in the A10/A13 is the Synopsys DesignWare 8250. The wrong use of a regular 8250 driver may lead to a oops during kernel boot with "irq 17: nobody cared", because the apb UART as an extra interrupt that gets raised when writing to the LCR when busy. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sunxi.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi index 8bbc2bfef221..8b36abea9f2e 100644 --- a/arch/arm/boot/dts/sunxi.dtsi +++ b/arch/arm/boot/dts/sunxi.dtsi @@ -60,19 +60,21 @@ }; uart0: uart@01c28000 { - compatible = "ns8250"; + compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <1>; reg-shift = <2>; + reg-io-width = <4>; clock-frequency = <24000000>; status = "disabled"; }; uart1: uart@01c28400 { - compatible = "ns8250"; + compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = <2>; reg-shift = <2>; + reg-io-width = <4>; clock-frequency = <24000000>; status = "disabled"; }; From e65b9ad222c280c031bc8d3642cc38dd3026fe06 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 15 Jan 2013 20:12:37 +0100 Subject: [PATCH 411/553] lockdep, rwsem: fix down_write_nest_lock() if !CONFIG_DEBUG_LOCK_ALLOC Commit 1b963c81b145 ("lockdep, rwsem: provide down_write_nest_lock()") contains a bug in a codepath when CONFIG_DEBUG_LOCK_ALLOC is disabled, which causes down_read() to be called instead of down_write() by mistake on such configurations. Fix that. Reported-and-tested-by: Andrew Clayton Reported-and-tested-by: Zlatko Calusic Signed-off-by: Jiri Kosina Reviewed-by: Rik van Riel Signed-off-by: Linus Torvalds --- include/linux/rwsem.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h index 413cc11e414a..8da67d625e13 100644 --- a/include/linux/rwsem.h +++ b/include/linux/rwsem.h @@ -135,7 +135,7 @@ do { \ #else # define down_read_nested(sem, subclass) down_read(sem) -# define down_write_nest_lock(sem, nest_lock) down_read(sem) +# define down_write_nest_lock(sem, nest_lock) down_write(sem) # define down_write_nested(sem, subclass) down_write(sem) #endif From 30a4840a4cd74301058a1f054f335185f978ace8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jan 2013 15:27:46 +0100 Subject: [PATCH 412/553] drivers/base/cpu.c: Fix typo in comment [ We should make fun of people who can't speel too, but then we'd have no time for any real work at all - Linus ] Signed-off-by: Linus Torvalds --- drivers/base/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index 63452943abd1..fb10728f6372 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -224,7 +224,7 @@ static void cpu_device_release(struct device *dev) * by the cpu device. * * Never copy this way of doing things, or you too will be made fun of - * on the linux-kerenl list, you have been warned. + * on the linux-kernel list, you have been warned. */ } From fbfc23ef905e41cbf621031a3d560a55a010dd54 Mon Sep 17 00:00:00 2001 From: Chuansheng Liu Date: Mon, 24 Dec 2012 22:19:56 +0800 Subject: [PATCH 413/553] mfd, TWL4030: TWL4030 need select REGMAP_I2C Fix the build error: drivers/built-in.o: In function `twl_probe': drivers/mfd/twl-core.c:1256: undefined reference to `devm_regmap_init_i2c' make: *** [vmlinux] Error 1 Signed-off-by: liu chuansheng Acked-by: Peter Ujfalusi [ Samuel is busy, taking it directly - Linus ] Signed-off-by: Linus Torvalds --- drivers/mfd/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 1c0abd4dfc43..47ad4e270877 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -292,6 +292,7 @@ config TWL4030_CORE bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" depends on I2C=y && GENERIC_HARDIRQS select IRQ_DOMAIN + select REGMAP_I2C help Say yes here if you have TWL4030 / TWL6030 family chip on your board. This core driver provides register access and IRQ handling From 3a55fb0d9fe8e2f4594329edd58c5fd6f35a99dd Mon Sep 17 00:00:00 2001 From: Kirill Smelkov Date: Fri, 2 Nov 2012 15:41:01 +0400 Subject: [PATCH 414/553] Tell the world we gave up on pushing CC_OPTIMIZE_FOR_SIZE In commit 281dc5c5ec0f ("Give up on pushing CC_OPTIMIZE_FOR_SIZE") we already changed the actual default value, but the help-text still suggested 'y'. Fix the help text too, for all the same reasons. Sadly, -Os keeps on generating some very suboptimal code for certain cases, to the point where any I$ miss upside is swamped by the downside. The main ones are: - using "rep movsb" for memcpy, even on CPU's where that is horrendously bad for performance. - not honoring branch prediction information, so any I$ footprint you win from smaller code, you lose from less code density in the I$. - using divide instructions when that is very expensive. Signed-off-by: Kirill Smelkov Signed-off-by: Linus Torvalds --- init/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/init/Kconfig b/init/Kconfig index 7d30240e5bfe..be8b7f55312d 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1182,7 +1182,7 @@ config CC_OPTIMIZE_FOR_SIZE Enabling this option will pass "-Os" instead of "-O2" to gcc resulting in a smaller kernel. - If unsure, say Y. + If unsure, say N. config SYSCTL bool From 9174adbee4a9a49d0139f5d71969852b36720809 Mon Sep 17 00:00:00 2001 From: Andrew Cooper Date: Wed, 16 Jan 2013 12:00:55 +0000 Subject: [PATCH 415/553] xen: Fix stack corruption in xen_failsafe_callback for 32bit PVOPS guests. This fixes CVE-2013-0190 / XSA-40 There has been an error on the xen_failsafe_callback path for failed iret, which causes the stack pointer to be wrong when entering the iret_exc error path. This can result in the kernel crashing. In the classic kernel case, the relevant code looked a little like: popl %eax # Error code from hypervisor jz 5f addl $16,%esp jmp iret_exc # Hypervisor said iret fault 5: addl $16,%esp # Hypervisor said segment selector fault Here, there are two identical addls on either option of a branch which appears to have been optimised by hoisting it above the jz, and converting it to an lea, which leaves the flags register unaffected. In the PVOPS case, the code looks like: popl_cfi %eax # Error from the hypervisor lea 16(%esp),%esp # Add $16 before choosing fault path CFI_ADJUST_CFA_OFFSET -16 jz 5f addl $16,%esp # Incorrectly adjust %esp again jmp iret_exc It is possible unprivileged userspace applications to cause this behaviour, for example by loading an LDT code selector, then changing the code selector to be not-present. At this point, there is a race condition where it is possible for the hypervisor to return back to userspace from an interrupt, fault on its own iret, and inject a failsafe_callback into the kernel. This bug has been present since the introduction of Xen PVOPS support in commit 5ead97c84 (xen: Core Xen implementation), in 2.6.23. Signed-off-by: Frediano Ziglio Signed-off-by: Andrew Cooper Cc: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/kernel/entry_32.S | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 88b725aa1d52..cf8639b4dcf3 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -1084,7 +1084,6 @@ ENTRY(xen_failsafe_callback) lea 16(%esp),%esp CFI_ADJUST_CFA_OFFSET -16 jz 5f - addl $16,%esp jmp iret_exc 5: pushl_cfi $-1 /* orig_ax = -1 => not a system call */ SAVE_ALL From d44d9bc68e32ad5881b105f82bd259d261d1ef74 Mon Sep 17 00:00:00 2001 From: Mark Tinguely Date: Tue, 4 Dec 2012 17:18:02 -0600 Subject: [PATCH 416/553] xfs: use b_maps[] for discontiguous buffers Commits starting at 77c1a08 introduced a multiple segment support to xfs_buf. xfs_trans_buf_item_match() could not find a multi-segment buffer in the transaction because it was looking at the single segment block number rather than the multi-segment b_maps[0].bm.bn. This results on a recursive buffer lock that can never be satisfied. This patch: 1) Changed the remaining b_map accesses to be b_maps[0] accesses. 2) Renames the single segment b_map structure to __b_map to avoid future confusion. Signed-off-by: Mark Tinguely Reviewed-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Ben Myers --- fs/xfs/xfs_buf.c | 12 ++++++------ fs/xfs/xfs_buf.h | 6 +++--- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index 26673a0b20e7..56d1614760cf 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -175,7 +175,7 @@ xfs_buf_get_maps( bp->b_map_count = map_count; if (map_count == 1) { - bp->b_maps = &bp->b_map; + bp->b_maps = &bp->__b_map; return 0; } @@ -193,7 +193,7 @@ static void xfs_buf_free_maps( struct xfs_buf *bp) { - if (bp->b_maps != &bp->b_map) { + if (bp->b_maps != &bp->__b_map) { kmem_free(bp->b_maps); bp->b_maps = NULL; } @@ -377,8 +377,8 @@ xfs_buf_allocate_memory( } use_alloc_page: - start = BBTOB(bp->b_map.bm_bn) >> PAGE_SHIFT; - end = (BBTOB(bp->b_map.bm_bn + bp->b_length) + PAGE_SIZE - 1) + start = BBTOB(bp->b_maps[0].bm_bn) >> PAGE_SHIFT; + end = (BBTOB(bp->b_maps[0].bm_bn + bp->b_length) + PAGE_SIZE - 1) >> PAGE_SHIFT; page_count = end - start; error = _xfs_buf_get_pages(bp, page_count, flags); @@ -640,7 +640,7 @@ _xfs_buf_read( xfs_buf_flags_t flags) { ASSERT(!(flags & XBF_WRITE)); - ASSERT(bp->b_map.bm_bn != XFS_BUF_DADDR_NULL); + ASSERT(bp->b_maps[0].bm_bn != XFS_BUF_DADDR_NULL); bp->b_flags &= ~(XBF_WRITE | XBF_ASYNC | XBF_READ_AHEAD); bp->b_flags |= flags & (XBF_READ | XBF_ASYNC | XBF_READ_AHEAD); @@ -1709,7 +1709,7 @@ xfs_buf_cmp( struct xfs_buf *bp = container_of(b, struct xfs_buf, b_list); xfs_daddr_t diff; - diff = ap->b_map.bm_bn - bp->b_map.bm_bn; + diff = ap->b_maps[0].bm_bn - bp->b_maps[0].bm_bn; if (diff < 0) return -1; if (diff > 0) diff --git a/fs/xfs/xfs_buf.h b/fs/xfs/xfs_buf.h index 23f5642480bb..433a12ed7b17 100644 --- a/fs/xfs/xfs_buf.h +++ b/fs/xfs/xfs_buf.h @@ -151,7 +151,7 @@ typedef struct xfs_buf { struct page **b_pages; /* array of page pointers */ struct page *b_page_array[XB_PAGES]; /* inline pages */ struct xfs_buf_map *b_maps; /* compound buffer map */ - struct xfs_buf_map b_map; /* inline compound buffer map */ + struct xfs_buf_map __b_map; /* inline compound buffer map */ int b_map_count; int b_io_length; /* IO size in BBs */ atomic_t b_pin_count; /* pin count */ @@ -330,8 +330,8 @@ void xfs_buf_stale(struct xfs_buf *bp); * In future, uncached buffers will pass the block number directly to the io * request function and hence these macros will go away at that point. */ -#define XFS_BUF_ADDR(bp) ((bp)->b_map.bm_bn) -#define XFS_BUF_SET_ADDR(bp, bno) ((bp)->b_map.bm_bn = (xfs_daddr_t)(bno)) +#define XFS_BUF_ADDR(bp) ((bp)->b_maps[0].bm_bn) +#define XFS_BUF_SET_ADDR(bp, bno) ((bp)->b_maps[0].bm_bn = (xfs_daddr_t)(bno)) static inline void xfs_buf_set_ref(struct xfs_buf *bp, int lru_ref) { From 0f22f9d0cd8a630b40a9ccc07a8844345b185aae Mon Sep 17 00:00:00 2001 From: Mark Tinguely Date: Tue, 4 Dec 2012 17:18:03 -0600 Subject: [PATCH 417/553] xfs: rename bli_format to avoid confusion with bli_formats Rename the bli_format structure to __bli_format to avoid accidently confusing them with the bli_formats pointer. Signed-off-by: Mark Tinguely Reviewed-by: Christoph Hellwig Reviewed-by: Dave Chinner Signed-off-by: Ben Myers --- fs/xfs/xfs_buf_item.c | 22 +++++++++++----------- fs/xfs/xfs_buf_item.h | 2 +- fs/xfs/xfs_trans_buf.c | 24 ++++++++++++------------ 3 files changed, 24 insertions(+), 24 deletions(-) diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index becf4a97efc6..1975b3d9007a 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -71,7 +71,7 @@ xfs_buf_item_log_debug( chunk_num = byte >> XFS_BLF_SHIFT; word_num = chunk_num >> BIT_TO_WORD_SHIFT; bit_num = chunk_num & (NBWORD - 1); - wordp = &(bip->bli_format.blf_data_map[word_num]); + wordp = &(bip->__bli_format.blf_data_map[word_num]); bit_set = *wordp & (1 << bit_num); ASSERT(bit_set); byte++; @@ -237,7 +237,7 @@ xfs_buf_item_size( * cancel flag in it. */ trace_xfs_buf_item_size_stale(bip); - ASSERT(bip->bli_format.blf_flags & XFS_BLF_CANCEL); + ASSERT(bip->__bli_format.blf_flags & XFS_BLF_CANCEL); return bip->bli_format_count; } @@ -278,7 +278,7 @@ xfs_buf_item_format_segment( uint buffer_offset; /* copy the flags across from the base format item */ - blfp->blf_flags = bip->bli_format.blf_flags; + blfp->blf_flags = bip->__bli_format.blf_flags; /* * Base size is the actual size of the ondisk structure - it reflects @@ -371,7 +371,7 @@ xfs_buf_item_format_segment( nbits++; } } - bip->bli_format.blf_size = nvecs; + bip->__bli_format.blf_size = nvecs; return vecp; } @@ -405,7 +405,7 @@ xfs_buf_item_format( if (bip->bli_flags & XFS_BLI_INODE_BUF) { if (!((bip->bli_flags & XFS_BLI_INODE_ALLOC_BUF) && xfs_log_item_in_current_chkpt(lip))) - bip->bli_format.blf_flags |= XFS_BLF_INODE_BUF; + bip->__bli_format.blf_flags |= XFS_BLF_INODE_BUF; bip->bli_flags &= ~XFS_BLI_INODE_BUF; } @@ -485,7 +485,7 @@ xfs_buf_item_unpin( ASSERT(bip->bli_flags & XFS_BLI_STALE); ASSERT(xfs_buf_islocked(bp)); ASSERT(XFS_BUF_ISSTALE(bp)); - ASSERT(bip->bli_format.blf_flags & XFS_BLF_CANCEL); + ASSERT(bip->__bli_format.blf_flags & XFS_BLF_CANCEL); trace_xfs_buf_item_unpin_stale(bip); @@ -631,7 +631,7 @@ xfs_buf_item_unlock( */ if (bip->bli_flags & XFS_BLI_STALE) { trace_xfs_buf_item_unlock_stale(bip); - ASSERT(bip->bli_format.blf_flags & XFS_BLF_CANCEL); + ASSERT(bip->__bli_format.blf_flags & XFS_BLF_CANCEL); if (!aborted) { atomic_dec(&bip->bli_refcount); return; @@ -644,8 +644,8 @@ xfs_buf_item_unlock( * If the buf item isn't tracking any data, free it, otherwise drop the * reference we hold to it. */ - if (xfs_bitmap_empty(bip->bli_format.blf_data_map, - bip->bli_format.blf_map_size)) + if (xfs_bitmap_empty(bip->__bli_format.blf_data_map, + bip->__bli_format.blf_map_size)) xfs_buf_item_relse(bp); else atomic_dec(&bip->bli_refcount); @@ -716,7 +716,7 @@ xfs_buf_item_get_format( bip->bli_format_count = count; if (count == 1) { - bip->bli_formats = &bip->bli_format; + bip->bli_formats = &bip->__bli_format; return 0; } @@ -731,7 +731,7 @@ STATIC void xfs_buf_item_free_format( struct xfs_buf_log_item *bip) { - if (bip->bli_formats != &bip->bli_format) { + if (bip->bli_formats != &bip->__bli_format) { kmem_free(bip->bli_formats); bip->bli_formats = NULL; } diff --git a/fs/xfs/xfs_buf_item.h b/fs/xfs/xfs_buf_item.h index 6850f49f4af3..16def435944a 100644 --- a/fs/xfs/xfs_buf_item.h +++ b/fs/xfs/xfs_buf_item.h @@ -104,7 +104,7 @@ typedef struct xfs_buf_log_item { #endif int bli_format_count; /* count of headers */ struct xfs_buf_log_format *bli_formats; /* array of in-log header ptrs */ - struct xfs_buf_log_format bli_format; /* embedded in-log header */ + struct xfs_buf_log_format __bli_format; /* embedded in-log header */ } xfs_buf_log_item_t; void xfs_buf_item_init(struct xfs_buf *, struct xfs_mount *); diff --git a/fs/xfs/xfs_trans_buf.c b/fs/xfs/xfs_trans_buf.c index 4fc17d479d42..f7510bf68284 100644 --- a/fs/xfs/xfs_trans_buf.c +++ b/fs/xfs/xfs_trans_buf.c @@ -93,7 +93,7 @@ _xfs_trans_bjoin( xfs_buf_item_init(bp, tp->t_mountp); bip = bp->b_fspriv; ASSERT(!(bip->bli_flags & XFS_BLI_STALE)); - ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_CANCEL)); + ASSERT(!(bip->__bli_format.blf_flags & XFS_BLF_CANCEL)); ASSERT(!(bip->bli_flags & XFS_BLI_LOGGED)); if (reset_recur) bip->bli_recur = 0; @@ -432,7 +432,7 @@ xfs_trans_brelse(xfs_trans_t *tp, bip = bp->b_fspriv; ASSERT(bip->bli_item.li_type == XFS_LI_BUF); ASSERT(!(bip->bli_flags & XFS_BLI_STALE)); - ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_CANCEL)); + ASSERT(!(bip->__bli_format.blf_flags & XFS_BLF_CANCEL)); ASSERT(atomic_read(&bip->bli_refcount) > 0); trace_xfs_trans_brelse(bip); @@ -519,7 +519,7 @@ xfs_trans_bhold(xfs_trans_t *tp, ASSERT(bp->b_transp == tp); ASSERT(bip != NULL); ASSERT(!(bip->bli_flags & XFS_BLI_STALE)); - ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_CANCEL)); + ASSERT(!(bip->__bli_format.blf_flags & XFS_BLF_CANCEL)); ASSERT(atomic_read(&bip->bli_refcount) > 0); bip->bli_flags |= XFS_BLI_HOLD; @@ -539,7 +539,7 @@ xfs_trans_bhold_release(xfs_trans_t *tp, ASSERT(bp->b_transp == tp); ASSERT(bip != NULL); ASSERT(!(bip->bli_flags & XFS_BLI_STALE)); - ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_CANCEL)); + ASSERT(!(bip->__bli_format.blf_flags & XFS_BLF_CANCEL)); ASSERT(atomic_read(&bip->bli_refcount) > 0); ASSERT(bip->bli_flags & XFS_BLI_HOLD); @@ -598,7 +598,7 @@ xfs_trans_log_buf(xfs_trans_t *tp, bip->bli_flags &= ~XFS_BLI_STALE; ASSERT(XFS_BUF_ISSTALE(bp)); XFS_BUF_UNSTALE(bp); - bip->bli_format.blf_flags &= ~XFS_BLF_CANCEL; + bip->__bli_format.blf_flags &= ~XFS_BLF_CANCEL; } tp->t_flags |= XFS_TRANS_DIRTY; @@ -657,8 +657,8 @@ xfs_trans_binval( */ ASSERT(XFS_BUF_ISSTALE(bp)); ASSERT(!(bip->bli_flags & (XFS_BLI_LOGGED | XFS_BLI_DIRTY))); - ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_INODE_BUF)); - ASSERT(bip->bli_format.blf_flags & XFS_BLF_CANCEL); + ASSERT(!(bip->__bli_format.blf_flags & XFS_BLF_INODE_BUF)); + ASSERT(bip->__bli_format.blf_flags & XFS_BLF_CANCEL); ASSERT(bip->bli_item.li_desc->lid_flags & XFS_LID_DIRTY); ASSERT(tp->t_flags & XFS_TRANS_DIRTY); return; @@ -668,10 +668,10 @@ xfs_trans_binval( bip->bli_flags |= XFS_BLI_STALE; bip->bli_flags &= ~(XFS_BLI_INODE_BUF | XFS_BLI_LOGGED | XFS_BLI_DIRTY); - bip->bli_format.blf_flags &= ~XFS_BLF_INODE_BUF; - bip->bli_format.blf_flags |= XFS_BLF_CANCEL; - memset((char *)(bip->bli_format.blf_data_map), 0, - (bip->bli_format.blf_map_size * sizeof(uint))); + bip->__bli_format.blf_flags &= ~XFS_BLF_INODE_BUF; + bip->__bli_format.blf_flags |= XFS_BLF_CANCEL; + memset((char *)(bip->__bli_format.blf_data_map), 0, + (bip->__bli_format.blf_map_size * sizeof(uint))); bip->bli_item.li_desc->lid_flags |= XFS_LID_DIRTY; tp->t_flags |= XFS_TRANS_DIRTY; } @@ -775,5 +775,5 @@ xfs_trans_dquot_buf( type == XFS_BLF_GDQUOT_BUF); ASSERT(atomic_read(&bip->bli_refcount) > 0); - bip->bli_format.blf_flags |= type; + bip->__bli_format.blf_flags |= type; } From 2d0e9df579029b62adc72b50977182757cc04cd5 Mon Sep 17 00:00:00 2001 From: Mark Tinguely Date: Tue, 4 Dec 2012 17:18:04 -0600 Subject: [PATCH 418/553] xfs: fix segment in xfs_buf_item_format_segment Not every segment in a multi-segment buffer is dirty in a transaction and they will not be outputted. The assert in xfs_buf_item_format_segment() that checks for the at least one chunk of data in the segment to be used is not necessary true for multi-segmented buffers. Signed-off-by: Mark Tinguely Reviewed-by: Dave Chinner Signed-off-by: Ben Myers --- fs/xfs/xfs_buf_item.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index 1975b3d9007a..c48e60bd857d 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -287,6 +287,17 @@ xfs_buf_item_format_segment( */ base_size = offsetof(struct xfs_buf_log_format, blf_data_map) + (blfp->blf_map_size * sizeof(blfp->blf_data_map[0])); + + nvecs = 0; + first_bit = xfs_next_bit(blfp->blf_data_map, blfp->blf_map_size, 0); + if (!(bip->bli_flags & XFS_BLI_STALE) && first_bit == -1) { + /* + * If the map is not be dirty in the transaction, mark + * the size as zero and do not advance the vector pointer. + */ + goto out; + } + vecp->i_addr = blfp; vecp->i_len = base_size; vecp->i_type = XLOG_REG_TYPE_BFORMAT; @@ -301,15 +312,13 @@ xfs_buf_item_format_segment( */ trace_xfs_buf_item_format_stale(bip); ASSERT(blfp->blf_flags & XFS_BLF_CANCEL); - blfp->blf_size = nvecs; - return vecp; + goto out; } /* * Fill in an iovec for each set of contiguous chunks. */ - first_bit = xfs_next_bit(blfp->blf_data_map, blfp->blf_map_size, 0); - ASSERT(first_bit != -1); + last_bit = first_bit; nbits = 1; for (;;) { @@ -371,7 +380,8 @@ xfs_buf_item_format_segment( nbits++; } } - bip->__bli_format.blf_size = nvecs; +out: + blfp->blf_size = nvecs; return vecp; } From 91e4bac0b72736410c88632906953f14259144b1 Mon Sep 17 00:00:00 2001 From: Mark Tinguely Date: Tue, 4 Dec 2012 17:18:05 -0600 Subject: [PATCH 419/553] xfs: fix the multi-segment log buffer format Per Dave Chinner suggestion, this patch: 1) Corrects the detection of whether a multi-segment buffer is still tracking data. 2) Clears all the buffer log formats for a multi-segment buffer. Signed-off-by: Mark Tinguely Reviewed-by: Christoph Hellwig Reviewed-by: Dave Chinner Signed-off-by: Ben Myers --- fs/xfs/xfs_buf_item.c | 13 ++++++++++--- fs/xfs/xfs_trans_buf.c | 7 +++++-- 2 files changed, 15 insertions(+), 5 deletions(-) diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index c48e60bd857d..77b09750e92c 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -611,7 +611,7 @@ xfs_buf_item_unlock( { struct xfs_buf_log_item *bip = BUF_ITEM(lip); struct xfs_buf *bp = bip->bli_buf; - int aborted; + int aborted, clean, i; uint hold; /* Clear the buffer's association with this transaction. */ @@ -654,8 +654,15 @@ xfs_buf_item_unlock( * If the buf item isn't tracking any data, free it, otherwise drop the * reference we hold to it. */ - if (xfs_bitmap_empty(bip->__bli_format.blf_data_map, - bip->__bli_format.blf_map_size)) + clean = 1; + for (i = 0; i < bip->bli_format_count; i++) { + if (!xfs_bitmap_empty(bip->bli_formats[i].blf_data_map, + bip->bli_formats[i].blf_map_size)) { + clean = 0; + break; + } + } + if (clean) xfs_buf_item_relse(bp); else atomic_dec(&bip->bli_refcount); diff --git a/fs/xfs/xfs_trans_buf.c b/fs/xfs/xfs_trans_buf.c index f7510bf68284..3edf5dbee001 100644 --- a/fs/xfs/xfs_trans_buf.c +++ b/fs/xfs/xfs_trans_buf.c @@ -643,6 +643,7 @@ xfs_trans_binval( xfs_buf_t *bp) { xfs_buf_log_item_t *bip = bp->b_fspriv; + int i; ASSERT(bp->b_transp == tp); ASSERT(bip != NULL); @@ -670,8 +671,10 @@ xfs_trans_binval( bip->bli_flags &= ~(XFS_BLI_INODE_BUF | XFS_BLI_LOGGED | XFS_BLI_DIRTY); bip->__bli_format.blf_flags &= ~XFS_BLF_INODE_BUF; bip->__bli_format.blf_flags |= XFS_BLF_CANCEL; - memset((char *)(bip->__bli_format.blf_data_map), 0, - (bip->__bli_format.blf_map_size * sizeof(uint))); + for (i = 0; i < bip->bli_format_count; i++) { + memset(bip->bli_formats[i].blf_data_map, 0, + (bip->bli_formats[i].blf_map_size * sizeof(uint))); + } bip->bli_item.li_desc->lid_flags |= XFS_LID_DIRTY; tp->t_flags |= XFS_TRANS_DIRTY; } From ab7eac22008f044631c0a3f4be344ebc2cb0e266 Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Fri, 21 Dec 2012 10:45:17 -0500 Subject: [PATCH 420/553] xfs: remove int casts from debug dquot soft limit timer asserts The int casts here make it easy to trigger an assert with a large soft limit. For example, set a >4TB soft limit on an empty volume to reproduce a (0 > -x) comparison due to an overflow of d_blk_softlimit. Signed-off-by: Brian Foster Reviewed-by: Ben Myers Signed-off-by: Ben Myers --- fs/xfs/xfs_qm_syscalls.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_qm_syscalls.c b/fs/xfs/xfs_qm_syscalls.c index 5f53e75409b8..8a59f8546552 100644 --- a/fs/xfs/xfs_qm_syscalls.c +++ b/fs/xfs/xfs_qm_syscalls.c @@ -784,11 +784,11 @@ xfs_qm_scall_getquota( (XFS_IS_OQUOTA_ENFORCED(mp) && (dst->d_flags & (FS_PROJ_QUOTA | FS_GROUP_QUOTA)))) && dst->d_id != 0) { - if (((int) dst->d_bcount > (int) dst->d_blk_softlimit) && + if ((dst->d_bcount > dst->d_blk_softlimit) && (dst->d_blk_softlimit > 0)) { ASSERT(dst->d_btimer != 0); } - if (((int) dst->d_icount > (int) dst->d_ino_softlimit) && + if ((dst->d_icount > dst->d_ino_softlimit) && (dst->d_ino_softlimit > 0)) { ASSERT(dst->d_itimer != 0); } From 37f13561de6039b3a916d1510086030d097dea0f Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Thu, 10 Jan 2013 10:41:48 -0600 Subject: [PATCH 421/553] xfs: recalculate leaf entry pointer after compacting a dir2 block Dave Jones hit this assert when doing a compile on recent git, with CONFIG_XFS_DEBUG enabled: XFS: Assertion failed: (char *)dup - (char *)hdr == be16_to_cpu(*xfs_dir2_data_unused_tag_p(dup)), file: fs/xfs/xfs_dir2_data.c, line: 828 Upon further digging, the tag found by xfs_dir2_data_unused_tag_p(dup) contained "2" and not the proper offset, and I found that this value was changed after the memmoves under "Use a stale leaf for our new entry." in xfs_dir2_block_addname(), i.e. memmove(&blp[mid + 1], &blp[mid], (highstale - mid) * sizeof(*blp)); overwrote it. What has happened is that the previous call to xfs_dir2_block_compact() has rearranged things; it changes btp->count as well as the blp array. So after we make that call, we must recalculate the proper pointer to the leaf entries by making another call to xfs_dir2_block_leaf_p(). Dave provided a metadump image which led to a simple reproducer (create a particular filename in the affected directory) and this resolves the testcase as well as the bug on his live system. Thanks also to dchinner for looking at this one with me. Signed-off-by: Eric Sandeen Tested-by: Dave Jones Reviewed-by: Dave Chinner Reviewed-by: Mark Tinguely Signed-off-by: Ben Myers --- fs/xfs/xfs_dir2_block.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c index 7536faaa61e7..12afe07a91d7 100644 --- a/fs/xfs/xfs_dir2_block.c +++ b/fs/xfs/xfs_dir2_block.c @@ -355,10 +355,12 @@ xfs_dir2_block_addname( /* * If need to compact the leaf entries, do it now. */ - if (compact) + if (compact) { xfs_dir2_block_compact(tp, bp, hdr, btp, blp, &needlog, &lfloghigh, &lfloglow); - else if (btp->stale) { + /* recalculate blp post-compaction */ + blp = xfs_dir2_block_leaf_p(btp); + } else if (btp->stale) { /* * Set leaf logging boundaries to impossible state. * For the no-stale case they're set explicitly. From a73b59c51ab288d81b515b504790267f594884b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Wed, 16 Jan 2013 15:32:06 +0100 Subject: [PATCH 422/553] ARM: compile fix for DEBUG_LL=y && MMU=n MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit debug_ll_addr is only used on machines with an MMU so it can be #ifdef'ed out safely. This fixes: arch/arm/kernel/debug.S: Assembler messages: arch/arm/kernel/debug.S:104: Error: too many positional arguments The problem was introduced in e5c5f2a ARM: implement debug_ll_io_init(). Signed-off-by: Uwe Kleine-König Reviewed-by: Stephen Warren Acked-by: Rob Herring Signed-off-by: Olof Johansson --- arch/arm/kernel/debug.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 6809200c31fb..14f7c3b14632 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -100,12 +100,14 @@ ENTRY(printch) b 1b ENDPROC(printch) +#ifdef CONFIG_MMU ENTRY(debug_ll_addr) addruart r2, r3, ip str r2, [r0] str r3, [r1] mov pc, lr ENDPROC(debug_ll_addr) +#endif #else From c0d6cfd3007c16f03b74bfc5ab80d8ab47402fff Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 9 Jan 2013 17:13:23 -0800 Subject: [PATCH 423/553] ARM: S3C64XX: Fix build error with CONFIG_S3C_DEV_FB disabled If there is no board selecting CONFIG_S3C_DEV_FB enabled, build will fail on arch/arm/mach-s3c64xx/pm.c, where s3c_device_fb is referenced. This patch adds ifdef guard around the code making it compile only when CONFIG_S3C_DEV_FB is enabled. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/pm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 7feb426fc202..d2e1a16690bd 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -338,8 +338,10 @@ int __init s3c64xx_pm_init(void) for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++) pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false); +#ifdef CONFIG_S3C_DEV_FB if (dev_get_platdata(&s3c_device_fb.dev)) pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev); +#endif return 0; } From 753bd6ddf4802ce4b985890fb70ff4997a70afb8 Mon Sep 17 00:00:00 2001 From: Alim Akhtar Date: Wed, 16 Jan 2013 15:41:01 -0800 Subject: [PATCH 424/553] ARM: dts: correct the dw-mshc timing properties as per binding As per the current exynos-dw-mshc bindings, dw-mshc-sdr-timing and dw-mshc-ddr-timing properties are having only two cells, these properties are wrongly set for exynos5250 based cros5250 and smdk5250 platfroms. This patch corrects above timing propreties for above platfroms Signed-off-by: Alim Akhtar Tested-by: Doug Anderson Acked-by: Doug Anderson Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/cros5250-common.dtsi | 12 ++++++------ arch/arm/boot/dts/exynos5250-smdk5250.dts | 8 ++++---- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index fddd17417433..46c098017036 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -96,8 +96,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -120,8 +120,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -141,8 +141,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 942d5761ca97..e05b18f3c33d 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -115,8 +115,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -139,8 +139,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; From b86dc0d8c12bbb9fed3f392c284bdc7114ce00c1 Mon Sep 17 00:00:00 2001 From: Dimitris Papastamos Date: Wed, 16 Jan 2013 15:49:53 -0800 Subject: [PATCH 425/553] ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore We are using S3C_EINT(4) instead of S3C_EINT(5). Signed-off-by: Dimitris Papastamos Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410-module.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 553059f51841..755c0bb119f4 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -47,7 +47,7 @@ static struct spi_board_info wm1253_devs[] = { .bus_num = 0, .chip_select = 0, .mode = SPI_MODE_0, - .irq = S3C_EINT(5), + .irq = S3C_EINT(4), .controller_data = &wm0010_spi_csinfo, .platform_data = &wm0010_pdata, }, From e6b267ce14f61d9da0151b97ee26ab4d38055567 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 16 Jan 2013 10:58:41 -0200 Subject: [PATCH 426/553] video: imxfb: Do not crash on reboot Issuing a "reboot" command after the LCD times out causes the following warnings: Requesting system reboot ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:471 clk_disable+0x24/0x50() Modules linked in: [] (unwind_backtrace+0x0/0xf4) from [] (warn_slowpath_common+0x48/0x60) [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null+0x1c/0x24) from [] (clk_disable+0x24/0x50) [] (clk_disable+0x24/0x50) from [] (imxfb_disable_controller+0x48/0x7c) [] (imxfb_disable_controller+0x48/0x7c) from [] (platform_drv_shutdown+0x18/0x1c) [] (platform_drv_shutdown+0x18/0x1c) from [] (device_shutdown+0x48/0x14c) [] (device_shutdown+0x48/0x14c) from [] (kernel_restart_prepare+0x2c/0x3c) [] (kernel_restart_prepare+0x2c/0x3c) from [] (kernel_restart+0xc/0x48) [] (kernel_restart+0xc/0x48) from [] (sys_reboot+0xc0/0x1bc) [] (sys_reboot+0xc0/0x1bc) from [] (ret_fast_syscall+0x0/0x2c) ---[ end trace da6b502ca79c854f ]--- ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:380 clk_unprepare+0x1c/0x2c() Modules linked in: [] (unwind_backtrace+0x0/0xf4) from [] (warn_slowpath_common+0x48/0x60) [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null+0x1c/0x24) from [] (clk_unprepare+0x1c/0x2c) [] (clk_unprepare+0x1c/0x2c) from [] (imxfb_disable_controller+0x50/0x7c) [] (imxfb_disable_controller+0x50/0x7c) from [] (platform_drv_shutdown+0x18/0x1c) [] (platform_drv_shutdown+0x18/0x1c) from [] (device_shutdown+0x48/0x14c) [] (device_shutdown+0x48/0x14c) from [] (kernel_restart_prepare+0x2c/0x3c) [] (kernel_restart_prepare+0x2c/0x3c) from [] (kernel_restart+0xc/0x48) [] (kernel_restart+0xc/0x48) from [] (sys_reboot+0xc0/0x1bc) [] (sys_reboot+0xc0/0x1bc) from [] (ret_fast_syscall+0x0/0x2c) ---[ end trace da6b502ca79c8550 ]--- ------------[ cut here ]------------ This happens because "reboot" triggers imxfb_shutdown(), which calls imxfb_disable_controller with the clocks already disabled. To prevent this, add a clock enabled status so that we can check if the clocks are enabled before disabling them. Acked-by: Sascha Hauer Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- drivers/video/imxfb.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 8435c5d601a1..609f4e97bde7 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -139,6 +139,7 @@ struct imxfb_info { struct clk *clk_ahb; struct clk *clk_per; enum imxfb_type devtype; + bool enabled; /* * These are the addresses we mapped @@ -536,6 +537,10 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi) static void imxfb_enable_controller(struct imxfb_info *fbi) { + + if (fbi->enabled) + return; + pr_debug("Enabling LCD controller\n"); writel(fbi->screen_dma, fbi->regs + LCDC_SSA); @@ -556,6 +561,7 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) clk_prepare_enable(fbi->clk_ipg); clk_prepare_enable(fbi->clk_ahb); clk_prepare_enable(fbi->clk_per); + fbi->enabled = true; if (fbi->backlight_power) fbi->backlight_power(1); @@ -565,6 +571,9 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) static void imxfb_disable_controller(struct imxfb_info *fbi) { + if (!fbi->enabled) + return; + pr_debug("Disabling LCD controller\n"); if (fbi->backlight_power) @@ -575,6 +584,7 @@ static void imxfb_disable_controller(struct imxfb_info *fbi) clk_disable_unprepare(fbi->clk_per); clk_disable_unprepare(fbi->clk_ipg); clk_disable_unprepare(fbi->clk_ahb); + fbi->enabled = false; writel(0, fbi->regs + LCDC_RMCR); } From e4a5da51daddf104183b42995411e2496832de1d Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 27 Dec 2012 10:11:10 -0800 Subject: [PATCH 427/553] gpio: samsung: fix pinctrl condition for exynos and exynos5440 Since EXYNOS5440 can select PINCTRL_EXYNOS5440 without PINCTRL_SAMSUNG, it should be fixed. In detail, PINCTRL_SAMSUNG is a kind of frame work for supporting pinctrl on most Samsung SoCs including S3C, S5P as well except EXYNOS5440 so PINCTRL_EXYNOS5440 has been implemented separated. Cc: Thomas Abraham Signed-off-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/gpio/gpio-samsung.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 9070f8632002..713ec8c492b1 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -3009,7 +3009,7 @@ static __init int samsung_gpiolib_init(void) int i, nr_chips; int group = 0; -#ifdef CONFIG_PINCTRL_SAMSUNG +#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) /* * This gpio driver includes support for device tree support and there * are platforms using it. In order to maintain compatibility with those From dcb9c3491acd63396f51dd1daf29851a5f92f632 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 27 Dec 2012 10:12:30 -0800 Subject: [PATCH 428/553] gpio: samsung: silent build warning for EXYNOS5 SoCs This patch fixes following warning: drivers/gpio/gpio-samsung.c:450:32: warning: 'exynos_gpio_cfg' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2450:33: warning: 'exynos5_gpios_1' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2618:33: warning: 'exynos5_gpios_2' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2679:33: warning: 'exynos5_gpios_3' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2715:33: warning: 'exynos5_gpios_4' defined but not used [-Wunused-variable] Because current gpio-samsung is valid only on EXYNOS5250. Cc: Thomas Abraham Signed-off-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/gpio/gpio-samsung.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 713ec8c492b1..c1f6bc2d87a9 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -445,7 +445,7 @@ static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = { }; #endif -#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_ARCH_EXYNOS5) +#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_SOC_EXYNOS5250) static struct samsung_gpio_cfg exynos_gpio_cfg = { .set_pull = exynos_gpio_setpull, .get_pull = exynos_gpio_getpull, @@ -2445,7 +2445,7 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = { }; #endif -#ifdef CONFIG_ARCH_EXYNOS5 +#ifdef CONFIG_SOC_EXYNOS5250 static struct samsung_gpio_chip exynos5_gpios_1[] = { { .chip = { @@ -2613,7 +2613,7 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = { }; #endif -#ifdef CONFIG_ARCH_EXYNOS5 +#ifdef CONFIG_SOC_EXYNOS5250 static struct samsung_gpio_chip exynos5_gpios_2[] = { { .chip = { @@ -2674,7 +2674,7 @@ static struct samsung_gpio_chip exynos5_gpios_2[] = { }; #endif -#ifdef CONFIG_ARCH_EXYNOS5 +#ifdef CONFIG_SOC_EXYNOS5250 static struct samsung_gpio_chip exynos5_gpios_3[] = { { .chip = { @@ -2710,7 +2710,7 @@ static struct samsung_gpio_chip exynos5_gpios_3[] = { }; #endif -#ifdef CONFIG_ARCH_EXYNOS5 +#ifdef CONFIG_SOC_EXYNOS5250 static struct samsung_gpio_chip exynos5_gpios_4[] = { { .chip = { From b514407547890686572606c9dfa4b7f832db9958 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 17 Jan 2013 10:24:09 +0200 Subject: [PATCH 429/553] drm/i915: fix FORCEWAKE posting reads We stopped reading FORCEWAKE for posting reads in commit 8dee3eea3ccd3b6c00a8d3a08dd715d6adf737dd Author: Ben Widawsky Date: Sat Sep 1 22:59:50 2012 -0700 drm/i915: Never read FORCEWAKE and started using something from the same cacheline instead. On the bug reporter's machine this broke entering rc6 states after a suspend/resume cycle. It turns out reading ECOBUS as posting read worked fine, while GTFIFODBG did not, preventing RC6 states after suspend/resume per the bug report referenced below. It's not entirely clear why, but clearly GTFIFODBG was nowhere near the same cacheline or address range as FORCEWAKE. Trying out various registers for posting reads showed that all tested registers for which NEEDS_FORCE_WAKE() (in i915_drv.c) returns true work. Conversely, most (but not quite all) registers for which NEEDS_FORCE_WAKE() returns false do not work. Details in the referenced bug. Based on the above, add posting reads on ECOBUS where GTFIFODBG was previously relied on. In true cargo cult spirit, add posting reads for FORCEWAKE_VLV writes as well, but instead of ECOBUS, use FORCEWAKE_ACK_VLV which is in the same address range as FORCEWAKE_VLV. v2: Add more details to the commit message. No functional changes. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52411 Reported-and-tested-by: Alexander Bersenev CC: Ben Widawsky Signed-off-by: Jani Nikula Reviewed-by: Chris Wilson Cc: stable@vger.kernel.org [danvet: add cc: stable and make the commit message a bit clearer that this is a regression fix and what exactly broke.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index e83a11794172..3280cffe50f4 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4250,7 +4250,8 @@ static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) static void __gen6_gt_force_wake_mt_reset(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(0xffff)); - POSTING_READ(ECOBUS); /* something from same cacheline, but !FORCEWAKE */ + /* something from same cacheline, but !FORCEWAKE_MT */ + POSTING_READ(ECOBUS); } static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv) @@ -4267,7 +4268,8 @@ static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv) DRM_ERROR("Timed out waiting for forcewake old ack to clear.\n"); I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_ENABLE(FORCEWAKE_KERNEL)); - POSTING_READ(ECOBUS); /* something from same cacheline, but !FORCEWAKE */ + /* something from same cacheline, but !FORCEWAKE_MT */ + POSTING_READ(ECOBUS); if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1), FORCEWAKE_ACK_TIMEOUT_MS)) @@ -4304,14 +4306,16 @@ void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv) static void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE, 0); - /* gen6_gt_check_fifodbg doubles as the POSTING_READ */ + /* something from same cacheline, but !FORCEWAKE */ + POSTING_READ(ECOBUS); gen6_gt_check_fifodbg(dev_priv); } static void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(FORCEWAKE_KERNEL)); - /* gen6_gt_check_fifodbg doubles as the POSTING_READ */ + /* something from same cacheline, but !FORCEWAKE_MT */ + POSTING_READ(ECOBUS); gen6_gt_check_fifodbg(dev_priv); } @@ -4351,6 +4355,8 @@ int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv) static void vlv_force_wake_reset(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE_VLV, _MASKED_BIT_DISABLE(0xffff)); + /* something from same cacheline, but !FORCEWAKE_VLV */ + POSTING_READ(FORCEWAKE_ACK_VLV); } static void vlv_force_wake_get(struct drm_i915_private *dev_priv) @@ -4371,7 +4377,8 @@ static void vlv_force_wake_get(struct drm_i915_private *dev_priv) static void vlv_force_wake_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE_VLV, _MASKED_BIT_DISABLE(FORCEWAKE_KERNEL)); - /* The below doubles as a POSTING_READ */ + /* something from same cacheline, but !FORCEWAKE_VLV */ + POSTING_READ(FORCEWAKE_ACK_VLV); gen6_gt_check_fifodbg(dev_priv); } From 6948ce588bd765352df6f6b866f2151e26489ef1 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 20 Dec 2012 11:08:57 -0800 Subject: [PATCH 430/553] gpio: samsung: skip gpio lib registration for EXYNOS5440 Since exynos5440 can support pinctrl so skip the legacy gpiolib registration. If not, happens following. WARNING: at drivers/gpio/gpio-samsung.c:3102 samsung_gpiolib_init+0x68/0x8c() Unknown SoC in gpio-samsung, no GPIOs added Acked-by: Thomas Abraham Signed-off-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/gpio/gpio-samsung.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index c1f6bc2d87a9..76be7eed79de 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -3025,6 +3025,7 @@ static __init int samsung_gpiolib_init(void) static const struct of_device_id exynos_pinctrl_ids[] = { { .compatible = "samsung,pinctrl-exynos4210", }, { .compatible = "samsung,pinctrl-exynos4x12", }, + { .compatible = "samsung,pinctrl-exynos5440", }, }; for_each_matching_node(pctrl_np, exynos_pinctrl_ids) if (pctrl_np && of_device_is_available(pctrl_np)) From 11c0ceec073cb35a1bedfdece701351cfc1da5b7 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 14 Jan 2013 11:53:20 +0100 Subject: [PATCH 431/553] gpio: mvebu: Don't free chip label memory The gpio_chip.label field is a const char * and assigned the value of a call to dev_name(). Memory obtained from dev_name() should not be freed by drivers. Acked-by: Grant Likely Signed-off-by: Thierry Reding Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mvebu.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 7d9bd94be8d2..6819d63cb167 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -547,7 +547,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev) mvchip->membase = devm_request_and_ioremap(&pdev->dev, res); if (! mvchip->membase) { dev_err(&pdev->dev, "Cannot ioremap\n"); - kfree(mvchip->chip.label); return -ENOMEM; } @@ -557,14 +556,12 @@ static int mvebu_gpio_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (! res) { dev_err(&pdev->dev, "Cannot get memory resource\n"); - kfree(mvchip->chip.label); return -ENODEV; } mvchip->percpu_membase = devm_request_and_ioremap(&pdev->dev, res); if (! mvchip->percpu_membase) { dev_err(&pdev->dev, "Cannot ioremap\n"); - kfree(mvchip->chip.label); return -ENOMEM; } } @@ -625,7 +622,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev) mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1); if (mvchip->irqbase < 0) { dev_err(&pdev->dev, "no irqs\n"); - kfree(mvchip->chip.label); return -ENOMEM; } @@ -633,7 +629,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev) mvchip->membase, handle_level_irq); if (! gc) { dev_err(&pdev->dev, "Cannot allocate generic irq_chip\n"); - kfree(mvchip->chip.label); return -ENOMEM; } @@ -668,7 +663,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev) irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); kfree(gc); - kfree(mvchip->chip.label); return -ENODEV; } From 8ce03fd76d323526a693d05d85296ef07a387a9f Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sat, 17 Nov 2012 12:45:47 +0100 Subject: [PATCH 432/553] cuse: use mutex as registration lock instead of spinlocks We need to check for name-collisions during cuse-device registration. To avoid race-conditions, this needs to be protected during the whole device registration. Therefore, replace the spinlocks by mutexes first so we can safely extend the locked regions to include more expensive or sleeping code paths. Signed-off-by: David Herrmann Acked-by: Tejun Heo Signed-off-by: Miklos Szeredi --- fs/fuse/cuse.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c index ee8d55042298..048e89f25082 100644 --- a/fs/fuse/cuse.c +++ b/fs/fuse/cuse.c @@ -45,7 +45,6 @@ #include #include #include -#include #include #include @@ -63,7 +62,7 @@ struct cuse_conn { bool unrestricted_ioctl; }; -static DEFINE_SPINLOCK(cuse_lock); /* protects cuse_conntbl */ +static DEFINE_MUTEX(cuse_lock); /* protects registration */ static struct list_head cuse_conntbl[CUSE_CONNTBL_LEN]; static struct class *cuse_class; @@ -114,14 +113,14 @@ static int cuse_open(struct inode *inode, struct file *file) int rc; /* look up and get the connection */ - spin_lock(&cuse_lock); + mutex_lock(&cuse_lock); list_for_each_entry(pos, cuse_conntbl_head(devt), list) if (pos->dev->devt == devt) { fuse_conn_get(&pos->fc); cc = pos; break; } - spin_unlock(&cuse_lock); + mutex_unlock(&cuse_lock); /* dead? */ if (!cc) @@ -377,9 +376,9 @@ static void cuse_process_init_reply(struct fuse_conn *fc, struct fuse_req *req) cc->cdev = cdev; /* make the device available */ - spin_lock(&cuse_lock); + mutex_lock(&cuse_lock); list_add(&cc->list, cuse_conntbl_head(devt)); - spin_unlock(&cuse_lock); + mutex_unlock(&cuse_lock); /* announce device availability */ dev_set_uevent_suppress(dev, 0); @@ -520,9 +519,9 @@ static int cuse_channel_release(struct inode *inode, struct file *file) int rc; /* remove from the conntbl, no more access from this point on */ - spin_lock(&cuse_lock); + mutex_lock(&cuse_lock); list_del_init(&cc->list); - spin_unlock(&cuse_lock); + mutex_unlock(&cuse_lock); /* remove device */ if (cc->dev) From 30783587b0f318b9e2e165f34cf5dfd9425a4904 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sat, 17 Nov 2012 12:45:48 +0100 Subject: [PATCH 433/553] cuse: do not register multiple devices with identical names Sysfs doesn't allow two devices with the same name, but we register a sysfs entry for each cuse device without checking for name collisions. This extends the registration to first check whether the name was already registered. To avoid race-conditions between the name-check and linking the device, we need to protect the whole registration with a mutex. Signed-off-by: David Herrmann Acked-by: Tejun Heo Signed-off-by: Miklos Szeredi --- fs/fuse/cuse.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c index 048e89f25082..2a2797e2abc5 100644 --- a/fs/fuse/cuse.c +++ b/fs/fuse/cuse.c @@ -304,14 +304,14 @@ static void cuse_gendev_release(struct device *dev) */ static void cuse_process_init_reply(struct fuse_conn *fc, struct fuse_req *req) { - struct cuse_conn *cc = fc_to_cc(fc); + struct cuse_conn *cc = fc_to_cc(fc), *pos; struct cuse_init_out *arg = req->out.args[0].value; struct page *page = req->pages[0]; struct cuse_devinfo devinfo = { }; struct device *dev; struct cdev *cdev; dev_t devt; - int rc; + int rc, i; if (req->out.h.error || arg->major != FUSE_KERNEL_VERSION || arg->minor < 11) { @@ -355,15 +355,24 @@ static void cuse_process_init_reply(struct fuse_conn *fc, struct fuse_req *req) dev_set_drvdata(dev, cc); dev_set_name(dev, "%s", devinfo.name); + mutex_lock(&cuse_lock); + + /* make sure the device-name is unique */ + for (i = 0; i < CUSE_CONNTBL_LEN; ++i) { + list_for_each_entry(pos, &cuse_conntbl[i], list) + if (!strcmp(dev_name(pos->dev), dev_name(dev))) + goto err_unlock; + } + rc = device_add(dev); if (rc) - goto err_device; + goto err_unlock; /* register cdev */ rc = -ENOMEM; cdev = cdev_alloc(); if (!cdev) - goto err_device; + goto err_unlock; cdev->owner = THIS_MODULE; cdev->ops = &cuse_frontend_fops; @@ -376,7 +385,6 @@ static void cuse_process_init_reply(struct fuse_conn *fc, struct fuse_req *req) cc->cdev = cdev; /* make the device available */ - mutex_lock(&cuse_lock); list_add(&cc->list, cuse_conntbl_head(devt)); mutex_unlock(&cuse_lock); @@ -390,7 +398,8 @@ out: err_cdev: cdev_del(cdev); -err_device: +err_unlock: + mutex_unlock(&cuse_lock); put_device(dev); err_region: unregister_chrdev_region(devt, 1); From e2560362cc2b39a0567cab510121a7e93dfbe797 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 15 Jan 2013 12:24:46 +0100 Subject: [PATCH 434/553] cuse: fix uninitialized variable warnings Fix the following compiler warnings: fs/fuse/cuse.c: In function 'cuse_process_init_reply': fs/fuse/cuse.c:288:24: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/fuse/cuse.c:272:14: note: 'val' was declared here fs/fuse/cuse.c:284:10: warning: 'key' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/fuse/cuse.c:272:8: note: 'key' was declared here Signed-off-by: Miklos Szeredi --- fs/fuse/cuse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c index 2a2797e2abc5..e397b675b029 100644 --- a/fs/fuse/cuse.c +++ b/fs/fuse/cuse.c @@ -266,7 +266,7 @@ static int cuse_parse_one(char **pp, char *end, char **keyp, char **valp) static int cuse_parse_devinfo(char *p, size_t len, struct cuse_devinfo *devinfo) { char *end = p + len; - char *key, *val; + char *uninitialized_var(key), *uninitialized_var(val); int rc; while (true) { From 807185eb3e7271d7a1f2c08f3aa1b63dba547d07 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Wed, 29 Aug 2012 17:51:51 -0400 Subject: [PATCH 435/553] fuse: Move CUSE Kconfig entry from fs/Kconfig into fs/fuse/Kconfig Given that CUSE depends on FUSE, it only makes sense to move its Kconfig entry into the FUSE Kconfig file. Also, add a few grammatical and semantic touchups. Signed-off-by: Robert P. J. Day Signed-off-by: Miklos Szeredi --- fs/Kconfig | 10 ---------- fs/fuse/Kconfig | 16 ++++++++++++++-- 2 files changed, 14 insertions(+), 12 deletions(-) diff --git a/fs/Kconfig b/fs/Kconfig index cfe512fd1caf..780725a463b1 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -68,16 +68,6 @@ source "fs/quota/Kconfig" source "fs/autofs4/Kconfig" source "fs/fuse/Kconfig" -config CUSE - tristate "Character device in Userspace support" - depends on FUSE_FS - help - This FUSE extension allows character devices to be - implemented in userspace. - - If you want to develop or use userspace character device - based on CUSE, answer Y or M. - config GENERIC_ACL bool select FS_POSIX_ACL diff --git a/fs/fuse/Kconfig b/fs/fuse/Kconfig index 0cf160a94eda..1b2f6c2c3aaf 100644 --- a/fs/fuse/Kconfig +++ b/fs/fuse/Kconfig @@ -4,12 +4,24 @@ config FUSE_FS With FUSE it is possible to implement a fully functional filesystem in a userspace program. - There's also companion library: libfuse. This library along with - utilities is available from the FUSE homepage: + There's also a companion library: libfuse2. This library is available + from the FUSE homepage: + although chances are your distribution already has that library + installed if you've installed the "fuse" package itself. See for more information. See for needed library/utility version. If you want to develop a userspace FS, or if you want to use a filesystem based on FUSE, answer Y or M. + +config CUSE + tristate "Character device in Userspace support" + depends on FUSE_FS + help + This FUSE extension allows character devices to be + implemented in userspace. + + If you want to develop or use a userspace character device + based on CUSE, answer Y or M. From cdadb11cef1802c1b0228976f08647d276711086 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Sat, 10 Nov 2012 16:55:56 +0100 Subject: [PATCH 436/553] fuse: make fuse_file_fallocate() static Fix the following sparse warning: fs/fuse/file.c:2249:6: warning: symbol 'fuse_file_fallocate' was not declared. Should it be static? Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index e21d4d8f87e3..f3ab824fa302 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2177,8 +2177,8 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, return ret; } -long fuse_file_fallocate(struct file *file, int mode, loff_t offset, - loff_t length) +static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, + loff_t length) { struct fuse_file *ff = file->private_data; struct fuse_conn *fc = ff->fc; @@ -2213,7 +2213,6 @@ long fuse_file_fallocate(struct file *file, int mode, loff_t offset, return err; } -EXPORT_SYMBOL_GPL(fuse_file_fallocate); static const struct file_operations fuse_file_operations = { .llseek = fuse_file_llseek, From 8f706111a860c026bcb0abe0c5936f59c31e5c87 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 18 Oct 2012 22:51:25 +0800 Subject: [PATCH 437/553] fuse: remove unused variable in fuse_try_move_page() The variables mapping,index are initialized but never used otherwise, so remove the unused variables. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Miklos Szeredi --- fs/fuse/dev.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index c16335315e5d..e83351aa5bad 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -692,8 +692,6 @@ static int fuse_try_move_page(struct fuse_copy_state *cs, struct page **pagep) struct page *oldpage = *pagep; struct page *newpage; struct pipe_buffer *buf = cs->pipebufs; - struct address_space *mapping; - pgoff_t index; unlock_request(cs->fc, cs->req); fuse_copy_finish(cs); @@ -724,9 +722,6 @@ static int fuse_try_move_page(struct fuse_copy_state *cs, struct page **pagep) if (fuse_check_page(newpage) != 0) goto out_fallback_unlock; - mapping = oldpage->mapping; - index = oldpage->index; - /* * This is a new and locked page, it shouldn't be mapped or * have any special flags on it From 20707874fd4fd37e09513f508e642fa8bd06365a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 17 Jan 2013 13:10:50 -0500 Subject: [PATCH 438/553] Revert "drm/radeon: do not move bo to different placement at each cs" This reverts commit d025e9e2b890db679f1246037bf65bd4be512627. This causes corruption for a number of users and needs further investigation in the next cycle. https://bugzilla.kernel.org/show_bug.cgi?id=52491 https://bugs.freedesktop.org/show_bug.cgi?id=58659 http://lists.freedesktop.org/archives/dri-devel/2013-January/032961.html Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon.h | 1 - drivers/gpu/drm/radeon/radeon_object.c | 18 ++++++++++-------- 2 files changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 768e8fec0099..a08f657329a0 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -324,7 +324,6 @@ struct radeon_bo { struct list_head list; /* Protected by tbo.reserved */ u32 placements[3]; - u32 busy_placements[3]; struct ttm_placement placement; struct ttm_buffer_object tbo; struct ttm_bo_kmap_obj kmap; diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 883c95d8d90f..d3aface2d12d 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -84,6 +84,7 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain) rbo->placement.fpfn = 0; rbo->placement.lpfn = 0; rbo->placement.placement = rbo->placements; + rbo->placement.busy_placement = rbo->placements; if (domain & RADEON_GEM_DOMAIN_VRAM) rbo->placements[c++] = TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED | TTM_PL_FLAG_VRAM; @@ -104,14 +105,6 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain) if (!c) rbo->placements[c++] = TTM_PL_MASK_CACHING | TTM_PL_FLAG_SYSTEM; rbo->placement.num_placement = c; - - c = 0; - rbo->placement.busy_placement = rbo->busy_placements; - if (rbo->rdev->flags & RADEON_IS_AGP) { - rbo->busy_placements[c++] = TTM_PL_FLAG_WC | TTM_PL_FLAG_TT; - } else { - rbo->busy_placements[c++] = TTM_PL_FLAG_CACHED | TTM_PL_FLAG_TT; - } rbo->placement.num_busy_placement = c; } @@ -357,6 +350,7 @@ int radeon_bo_list_validate(struct list_head *head) { struct radeon_bo_list *lobj; struct radeon_bo *bo; + u32 domain; int r; r = ttm_eu_reserve_buffers(head); @@ -366,9 +360,17 @@ int radeon_bo_list_validate(struct list_head *head) list_for_each_entry(lobj, head, tv.head) { bo = lobj->bo; if (!bo->pin_count) { + domain = lobj->wdomain ? lobj->wdomain : lobj->rdomain; + + retry: + radeon_ttm_placement_from_domain(bo, domain); r = ttm_bo_validate(&bo->tbo, &bo->placement, true, false); if (unlikely(r)) { + if (r != -ERESTARTSYS && domain == RADEON_GEM_DOMAIN_VRAM) { + domain |= RADEON_GEM_DOMAIN_GTT; + goto retry; + } return r; } } From 6427a0d771dbf2a5cfbbed00caffbf1d11f4ae0b Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Thu, 6 Dec 2012 11:06:54 -0800 Subject: [PATCH 439/553] Drivers: hv: balloon: Fix a bug in the definition of struct dm_info_msg There is bug in the definition of struct dm_info_msg. This patch fixes the definition of this structure and makes the corresponding adjustments. Signed-off-by: K. Y. Srinivasan Reviewed-by: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_balloon.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c index f6c0011a0337..b9bb8f4c1c39 100644 --- a/drivers/hv/hv_balloon.c +++ b/drivers/hv/hv_balloon.c @@ -403,7 +403,7 @@ struct dm_info_header { */ struct dm_info_msg { - struct dm_info_header header; + struct dm_header hdr; __u32 reserved; __u32 info_size; __u8 info[]; @@ -503,13 +503,17 @@ static void hot_add_req(struct hv_dynmem_device *dm, struct dm_hot_add *msg) static void process_info(struct hv_dynmem_device *dm, struct dm_info_msg *msg) { - switch (msg->header.type) { + struct dm_info_header *info_hdr; + + info_hdr = (struct dm_info_header *)msg->info; + + switch (info_hdr->type) { case INFO_TYPE_MAX_PAGE_CNT: pr_info("Received INFO_TYPE_MAX_PAGE_CNT\n"); - pr_info("Data Size is %d\n", msg->header.data_size); + pr_info("Data Size is %d\n", info_hdr->data_size); break; default: - pr_info("Received Unknown type: %d\n", msg->header.type); + pr_info("Received Unknown type: %d\n", info_hdr->type); } } From 33080c1cda280b918349c676cb75bedb6db4a772 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Tue, 11 Dec 2012 11:07:17 -0800 Subject: [PATCH 440/553] Drivers: hv: balloon: Fix a memory leak The send buffer was being leaked; fix it. Signed-off-by: K. Y. Srinivasan Reviewed-by: Haiyang Zhang Reported-by: Jason Wang Acked-by: Jason Wang Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_balloon.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c index b9bb8f4c1c39..dd289fd179ca 100644 --- a/drivers/hv/hv_balloon.c +++ b/drivers/hv/hv_balloon.c @@ -883,7 +883,7 @@ static int balloon_probe(struct hv_device *dev, balloon_onchannelcallback, dev); if (ret) - return ret; + goto probe_error0; dm_device.dev = dev; dm_device.state = DM_INITIALIZING; @@ -895,7 +895,7 @@ static int balloon_probe(struct hv_device *dev, kthread_run(dm_thread_func, &dm_device, "hv_balloon"); if (IS_ERR(dm_device.thread)) { ret = PTR_ERR(dm_device.thread); - goto probe_error0; + goto probe_error1; } hv_set_drvdata(dev, &dm_device); @@ -918,12 +918,12 @@ static int balloon_probe(struct hv_device *dev, VM_PKT_DATA_INBAND, VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); if (ret) - goto probe_error1; + goto probe_error2; t = wait_for_completion_timeout(&dm_device.host_event, 5*HZ); if (t == 0) { ret = -ETIMEDOUT; - goto probe_error1; + goto probe_error2; } /* @@ -932,7 +932,7 @@ static int balloon_probe(struct hv_device *dev, */ if (dm_device.state == DM_INIT_ERROR) { ret = -ETIMEDOUT; - goto probe_error1; + goto probe_error2; } /* * Now submit our capabilities to the host. @@ -965,12 +965,12 @@ static int balloon_probe(struct hv_device *dev, VM_PKT_DATA_INBAND, VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); if (ret) - goto probe_error1; + goto probe_error2; t = wait_for_completion_timeout(&dm_device.host_event, 5*HZ); if (t == 0) { ret = -ETIMEDOUT; - goto probe_error1; + goto probe_error2; } /* @@ -979,18 +979,20 @@ static int balloon_probe(struct hv_device *dev, */ if (dm_device.state == DM_INIT_ERROR) { ret = -ETIMEDOUT; - goto probe_error1; + goto probe_error2; } dm_device.state = DM_INITIALIZED; return 0; -probe_error1: +probe_error2: kthread_stop(dm_device.thread); -probe_error0: +probe_error1: vmbus_close(dev->channel); +probe_error0: + kfree(send_buffer); return ret; } @@ -1003,6 +1005,7 @@ static int balloon_remove(struct hv_device *dev) vmbus_close(dev->channel); kthread_stop(dm->thread); + kfree(send_buffer); return 0; } From 1ee4c55fc9620451b2a825d793042a7e0775391b Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 14 Jan 2013 01:29:17 +0000 Subject: [PATCH 441/553] staging: vt6656: Fix inconsistent structure packing vt6656 has several headers that use the #pragma pack(1) directive to enable structure packing, but never disable it. The layout of structures defined in other headers can then depend on which order the various headers are included in, breaking the One Definition Rule. In practice this resulted in crashes on x86_64 until the order of header inclusion was changed for some files in commit 11d404cb56ecd ('staging: vt6656: fix headers and add cfg80211.'). But we need a proper fix that won't be affected by future changes to the order of inclusion. This removes the #pragma pack(1) directives and adds __packed to the structure definitions for which packing appears to have been intended. Reported-and-tested-by: Malcolm Priestley Signed-off-by: Ben Hutchings Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/bssdb.h | 1 - drivers/staging/vt6656/int.h | 1 - drivers/staging/vt6656/iocmd.h | 33 ++++++++++++++++----------------- drivers/staging/vt6656/iowpa.h | 8 +++----- 4 files changed, 19 insertions(+), 24 deletions(-) diff --git a/drivers/staging/vt6656/bssdb.h b/drivers/staging/vt6656/bssdb.h index 6b2ec390e775..806cbf72fb59 100644 --- a/drivers/staging/vt6656/bssdb.h +++ b/drivers/staging/vt6656/bssdb.h @@ -90,7 +90,6 @@ typedef struct tagSRSNCapObject { } SRSNCapObject, *PSRSNCapObject; // BSS info(AP) -#pragma pack(1) typedef struct tagKnownBSS { // BSS info BOOL bActive; diff --git a/drivers/staging/vt6656/int.h b/drivers/staging/vt6656/int.h index 5d8faf9f96ec..e0d2b07ba608 100644 --- a/drivers/staging/vt6656/int.h +++ b/drivers/staging/vt6656/int.h @@ -34,7 +34,6 @@ #include "device.h" /*--------------------- Export Definitions -------------------------*/ -#pragma pack(1) typedef struct tagSINTData { BYTE byTSR0; BYTE byPkt0; diff --git a/drivers/staging/vt6656/iocmd.h b/drivers/staging/vt6656/iocmd.h index 22710cef751d..ae6e2d237b20 100644 --- a/drivers/staging/vt6656/iocmd.h +++ b/drivers/staging/vt6656/iocmd.h @@ -95,13 +95,12 @@ typedef enum tagWZONETYPE { // Ioctl interface structure // Command structure // -#pragma pack(1) typedef struct tagSCmdRequest { u8 name[16]; void *data; u16 wResult; u16 wCmdCode; -} SCmdRequest, *PSCmdRequest; +} __packed SCmdRequest, *PSCmdRequest; // // Scan @@ -111,7 +110,7 @@ typedef struct tagSCmdScan { u8 ssid[SSID_MAXLEN + 2]; -} SCmdScan, *PSCmdScan; +} __packed SCmdScan, *PSCmdScan; // // BSS Join @@ -126,7 +125,7 @@ typedef struct tagSCmdBSSJoin { BOOL bPSEnable; BOOL bShareKeyAuth; -} SCmdBSSJoin, *PSCmdBSSJoin; +} __packed SCmdBSSJoin, *PSCmdBSSJoin; // // Zonetype Setting @@ -137,7 +136,7 @@ typedef struct tagSCmdZoneTypeSet { BOOL bWrite; WZONETYPE ZoneType; -} SCmdZoneTypeSet, *PSCmdZoneTypeSet; +} __packed SCmdZoneTypeSet, *PSCmdZoneTypeSet; typedef struct tagSWPAResult { char ifname[100]; @@ -145,7 +144,7 @@ typedef struct tagSWPAResult { u8 key_mgmt; u8 eap_type; BOOL authenticated; -} SWPAResult, *PSWPAResult; +} __packed SWPAResult, *PSWPAResult; typedef struct tagSCmdStartAP { @@ -157,7 +156,7 @@ typedef struct tagSCmdStartAP { BOOL bShareKeyAuth; u8 byBasicRate; -} SCmdStartAP, *PSCmdStartAP; +} __packed SCmdStartAP, *PSCmdStartAP; typedef struct tagSCmdSetWEP { @@ -167,7 +166,7 @@ typedef struct tagSCmdSetWEP { BOOL bWepKeyAvailable[WEP_NKEYS]; u32 auWepKeyLength[WEP_NKEYS]; -} SCmdSetWEP, *PSCmdSetWEP; +} __packed SCmdSetWEP, *PSCmdSetWEP; typedef struct tagSBSSIDItem { @@ -180,14 +179,14 @@ typedef struct tagSBSSIDItem { BOOL bWEPOn; u32 uRSSI; -} SBSSIDItem; +} __packed SBSSIDItem; typedef struct tagSBSSIDList { u32 uItem; SBSSIDItem sBSSIDList[0]; -} SBSSIDList, *PSBSSIDList; +} __packed SBSSIDList, *PSBSSIDList; typedef struct tagSNodeItem { @@ -208,7 +207,7 @@ typedef struct tagSNodeItem { u32 uTxAttempts; u16 wFailureRatio; -} SNodeItem; +} __packed SNodeItem; typedef struct tagSNodeList { @@ -216,7 +215,7 @@ typedef struct tagSNodeList { u32 uItem; SNodeItem sNodeList[0]; -} SNodeList, *PSNodeList; +} __packed SNodeList, *PSNodeList; typedef struct tagSCmdLinkStatus { @@ -229,7 +228,7 @@ typedef struct tagSCmdLinkStatus { u32 uChannel; u32 uLinkRate; -} SCmdLinkStatus, *PSCmdLinkStatus; +} __packed SCmdLinkStatus, *PSCmdLinkStatus; // // 802.11 counter @@ -247,7 +246,7 @@ typedef struct tagSDot11MIBCount { u32 ReceivedFragmentCount; u32 MulticastReceivedFrameCount; u32 FCSErrorCount; -} SDot11MIBCount, *PSDot11MIBCount; +} __packed SDot11MIBCount, *PSDot11MIBCount; @@ -355,13 +354,13 @@ typedef struct tagSStatMIBCount { u32 ullTxBroadcastBytes[2]; u32 ullTxMulticastBytes[2]; u32 ullTxDirectedBytes[2]; -} SStatMIBCount, *PSStatMIBCount; +} __packed SStatMIBCount, *PSStatMIBCount; typedef struct tagSCmdValue { u32 dwValue; -} SCmdValue, *PSCmdValue; +} __packed SCmdValue, *PSCmdValue; // // hostapd & viawget ioctl related @@ -431,7 +430,7 @@ struct viawget_hostapd_param { u8 ssid[32]; } scan_req; } u; -}; +} __packed; /*--------------------- Export Classes ----------------------------*/ diff --git a/drivers/staging/vt6656/iowpa.h b/drivers/staging/vt6656/iowpa.h index 959c8868f6e2..2522ddec718d 100644 --- a/drivers/staging/vt6656/iowpa.h +++ b/drivers/staging/vt6656/iowpa.h @@ -67,12 +67,11 @@ enum { -#pragma pack(1) typedef struct viawget_wpa_header { u8 type; u16 req_ie_len; u16 resp_ie_len; -} viawget_wpa_header; +} __packed viawget_wpa_header; struct viawget_wpa_param { u32 cmd; @@ -113,9 +112,8 @@ struct viawget_wpa_param { u8 *buf; } scan_results; } u; -}; +} __packed; -#pragma pack(1) struct viawget_scan_result { u8 bssid[6]; u8 ssid[32]; @@ -130,7 +128,7 @@ struct viawget_scan_result { int noise; int level; int maxrate; -}; +} __packed; /*--------------------- Export Classes ----------------------------*/ From ded2f295a36d17838fe97e80d7b6ea83381474f8 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 11 Jan 2013 12:06:27 +0100 Subject: [PATCH 442/553] pty: return EINVAL for TIOCGPTN for BSD ptys Commit bbb63c514a3464342967237a51a21ea8f61ab951 (drivers:tty:fix up ENOIOCTLCMD error handling) changed the default return value from tty ioctl to be ENOTTY and not EINVAL. This is appropriate. But in case of TIOCGPTN for the old BSD ptys glibc started failing because it expects EINVAL to be returned. Only then it continues to obtain the pts name the other way around. So fix this case by explicit return of EINVAL in this case. Signed-off-by: Jiri Slaby Reported-by: Florian Westphal Cc: Alan Cox Cc: stable # 3.7+ Signed-off-by: Greg Kroah-Hartman --- drivers/tty/pty.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index be6a373601b7..79ff3a5e925d 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -441,6 +441,8 @@ static int pty_bsd_ioctl(struct tty_struct *tty, return pty_get_pktmode(tty, (int __user *)arg); case TIOCSIG: /* Send signal to other side of pty */ return pty_signal(tty, (int) arg); + case TIOCGPTN: /* TTY returns ENOTTY, but glibc expects EINVAL here */ + return -EINVAL; } return -ENOIOCTLCMD; } From ebebd49a8eab5e9aa1b1f8f1614ccc3c2120f886 Mon Sep 17 00:00:00 2001 From: Stephen Hurd Date: Thu, 17 Jan 2013 14:14:53 -0800 Subject: [PATCH 443/553] 8250/16?50: Add support for Broadcom TruManage redirected serial port Add support for the UART device present in Broadcom TruManage capable NetXtreme chips (ie: 5761m 5762, and 5725). This implementation has a hidden transmit FIFO, so running in single-byte interrupt mode results in too many interrupts. The UART_CAP_HFIFO capability was added to track this. It continues to reload the THR as long as the THRE and TSRE bits are set in the LSR up to a specified limit (1024 is used here). Signed-off-by: Stephen Hurd Signed-off-by: Michael Chan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.c | 11 +++++++++ drivers/tty/serial/8250/8250.h | 1 + drivers/tty/serial/8250/8250_pci.c | 38 ++++++++++++++++++++++++++++++ include/uapi/linux/serial_core.h | 3 ++- 4 files changed, 52 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index d085e3a8ec06..f9320437a649 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -300,6 +300,12 @@ static const struct serial8250_config uart_config[] = { UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00, .flags = UART_CAP_FIFO, }, + [PORT_BRCM_TRUMANAGE] = { + .name = "TruManage", + .fifo_size = 1, + .tx_loadsz = 1024, + .flags = UART_CAP_HFIFO, + }, [PORT_8250_CIR] = { .name = "CIR port" } @@ -1490,6 +1496,11 @@ void serial8250_tx_chars(struct uart_8250_port *up) port->icount.tx++; if (uart_circ_empty(xmit)) break; + if (up->capabilities & UART_CAP_HFIFO) { + if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) != + BOTH_EMPTY) + break; + } } while (--count > 0); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 3b4ea84898c2..12caa1292b75 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -40,6 +40,7 @@ struct serial8250_config { #define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ #define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ #define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */ +#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 8a2c3d934187..a27a98e1b066 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1085,6 +1085,18 @@ pci_omegapci_setup(struct serial_private *priv, return setup_port(priv, port, 2, idx * 8, 0); } +static int +pci_brcm_trumanage_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + int ret = pci_default_setup(priv, board, port, idx); + + port->port.type = PORT_BRCM_TRUMANAGE; + port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); + return ret; +} + static int skip_tx_en_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) @@ -1304,6 +1316,7 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020 #define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 #define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 +#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ @@ -1953,6 +1966,17 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = pci_xr17v35x_setup, }, + /* + * Broadcom TruManage (NetXtreme) + */ + { + .vendor = PCI_VENDOR_ID_BROADCOM, + .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_brcm_trumanage_setup, + }, + /* * Default "match everything" terminator entry */ @@ -2148,6 +2172,7 @@ enum pci_board_num_t { pbn_ce4100_1_115200, pbn_omegapci, pbn_NETMOS9900_2s_115200, + pbn_brcm_trumanage, }; /* @@ -2892,6 +2917,12 @@ static struct pciserial_board pci_boards[] = { .num_ports = 2, .base_baud = 115200, }, + [pbn_brcm_trumanage] = { + .flags = FL_BASE0, + .num_ports = 1, + .reg_shift = 2, + .base_baud = 115200, + }, }; static const struct pci_device_id blacklist[] = { @@ -4470,6 +4501,13 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_omegapci }, + /* + * Broadcom TruManage + */ + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_brcm_trumanage }, + /* * AgeStar as-prs2-009 */ diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 78f99d97475b..2c6c85f18ea0 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -50,7 +50,8 @@ #define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */ #define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */ #define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */ -#define PORT_MAX_8250 24 /* max port ID */ +#define PORT_BRCM_TRUMANAGE 24 +#define PORT_MAX_8250 25 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed From 444ee9bd3d0fa78317c6127c961af5accf50038b Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 16 Jan 2013 18:53:48 -0800 Subject: [PATCH 444/553] PCI: remove depends on CONFIG_EXPERIMENTAL The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Signed-off-by: Kees Cook Signed-off-by: Bjorn Helgaas --- drivers/pci/pcie/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig index 6c8bc5809787..fde4a32a0295 100644 --- a/drivers/pci/pcie/Kconfig +++ b/drivers/pci/pcie/Kconfig @@ -82,4 +82,4 @@ endchoice config PCIE_PME def_bool y - depends on PCIEPORTBUS && PM_RUNTIME && EXPERIMENTAL && ACPI + depends on PCIEPORTBUS && PM_RUNTIME && ACPI From d3286144c92ec876da9e30320afa875699b7e0f1 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Thu, 17 Jan 2013 13:50:25 +0100 Subject: [PATCH 445/553] KVM: PPC: Emulate dcbf Guests can trigger MMIO exits using dcbf. Since we don't emulate cache incoherent MMIO, just do nothing and move on. Reported-by: Ben Collins Signed-off-by: Alexander Graf Tested-by: Ben Collins CC: stable@vger.kernel.org --- arch/powerpc/kvm/emulate.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c index b0855e5d8905..9d9cddc5b346 100644 --- a/arch/powerpc/kvm/emulate.c +++ b/arch/powerpc/kvm/emulate.c @@ -39,6 +39,7 @@ #define OP_31_XOP_TRAP 4 #define OP_31_XOP_LWZX 23 #define OP_31_XOP_TRAP_64 68 +#define OP_31_XOP_DCBF 86 #define OP_31_XOP_LBZX 87 #define OP_31_XOP_STWX 151 #define OP_31_XOP_STBX 215 @@ -374,6 +375,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) emulated = kvmppc_emulate_mtspr(vcpu, sprn, rs); break; + case OP_31_XOP_DCBF: case OP_31_XOP_DCBI: /* Do nothing. The guest is performing dcbi because * hardware DMA is not snooped by the dcache, but From 811a37effdb11e54e1ff1ddaa944286c88f58487 Mon Sep 17 00:00:00 2001 From: Tormod Volden Date: Wed, 9 Jan 2013 22:23:32 +0100 Subject: [PATCH 446/553] staging: wlan-ng: Fix clamping of returned SSID length Commit 2e254212 broke listing of available network names, since it clamped the length of the returned SSID to WLAN_BSSID_LEN (6) instead of WLAN_SSID_MAXLEN (32). https://bugzilla.kernel.org/show_bug.cgi?id=52501 Signed-off-by: Tormod Volden Cc: stable # 3.4+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wlan-ng/prism2mgmt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/wlan-ng/prism2mgmt.c b/drivers/staging/wlan-ng/prism2mgmt.c index 4efa9bc0fcf0..89bfd858bb28 100644 --- a/drivers/staging/wlan-ng/prism2mgmt.c +++ b/drivers/staging/wlan-ng/prism2mgmt.c @@ -406,7 +406,7 @@ int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp) /* SSID */ req->ssid.status = P80211ENUM_msgitem_status_data_ok; req->ssid.data.len = le16_to_cpu(item->ssid.len); - req->ssid.data.len = min_t(u16, req->ssid.data.len, WLAN_BSSID_LEN); + req->ssid.data.len = min_t(u16, req->ssid.data.len, WLAN_SSID_MAXLEN); memcpy(req->ssid.data.data, item->ssid.data, req->ssid.data.len); /* supported rates */ From 7dfc8331781f954bbea5c59d4411acf3b28530c1 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 11 Jan 2013 20:17:01 -0500 Subject: [PATCH 447/553] staging/sb105x: PARPORT config is not good enough must use PARPORT_PC The sb105x driver calls parport_pc_probe_port() which isn't defined if PARPORT_PC isn't enabled. Protecting it with CONFIG_PARPORT is not good enough, must protect it with CONFIG_PARPORT_PC. Reported-by: Randy Dunlap Acked-by: Randy Dunlap Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman --- drivers/staging/sb105x/sb_pci_mp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/sb105x/sb_pci_mp.c b/drivers/staging/sb105x/sb_pci_mp.c index 131afd0c460c..9464f3874346 100644 --- a/drivers/staging/sb105x/sb_pci_mp.c +++ b/drivers/staging/sb105x/sb_pci_mp.c @@ -3054,7 +3054,7 @@ static int init_mp_dev(struct pci_dev *pcidev, mppcibrd_t brd) sbdev->nr_ports = ((portnum_hex/16)*10) + (portnum_hex % 16); } break; -#ifdef CONFIG_PARPORT +#ifdef CONFIG_PARPORT_PC case PCI_DEVICE_ID_MP2S1P : sbdev->nr_ports = 2; From 2291dff02e5f8c708a46a7c4c888f2c467e26642 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Thu, 17 Jan 2013 15:14:22 +0100 Subject: [PATCH 448/553] USB: option: blacklist network interface on ONDA MT8205 4G LTE MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver description files gives these names to the vendor specific functions on this modem: Diag VID_19D2&PID_0265&MI_00 NMEA VID_19D2&PID_0265&MI_01 AT cmd VID_19D2&PID_0265&MI_02 Modem VID_19D2&PID_0265&MI_03 Net VID_19D2&PID_0265&MI_04 Signed-off-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 478adcfcdf26..25724f66e676 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -930,7 +930,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */ .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff), /* ONDA MT8205 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */ .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) }, From 99beb2e9687ffd61c92a9875141eabe6f57a71b9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Tue, 15 Jan 2013 10:29:49 +0100 Subject: [PATCH 449/553] USB: option: add TP-LINK HSUPA Modem MA180 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver description files gives these names to the vendor specific functions on this modem: Diagnostics VID_2357&PID_0201&MI_00 NMEA VID_2357&PID_0201&MI_01 Modem VID_2357&PID_0201&MI_03 Networkcard VID_2357&PID_0201&MI_04 Reported-by: Thomas Schäfer Signed-off-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 25724f66e676..0d9dac9e7f93 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -449,6 +449,10 @@ static void option_instat_callback(struct urb *urb); #define PETATEL_VENDOR_ID 0x1ff4 #define PETATEL_PRODUCT_NP10T 0x600e +/* TP-LINK Incorporated products */ +#define TPLINK_VENDOR_ID 0x2357 +#define TPLINK_PRODUCT_MA180 0x0201 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -1312,6 +1316,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) }, { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) }, { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) }, + { USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); From 1ee0a224bc9aad1de496c795f96bc6ba2c394811 Mon Sep 17 00:00:00 2001 From: Wolfgang Frisch Date: Thu, 17 Jan 2013 01:07:02 +0100 Subject: [PATCH 450/553] USB: io_ti: Fix NULL dereference in chase_port() The tty is NULL when the port is hanging up. chase_port() needs to check for this. This patch is intended for stable series. The behavior was observed and tested in Linux 3.2 and 3.7.1. Johan Hovold submitted a more elaborate patch for the mainline kernel. [ 56.277883] usb 1-1: edge_bulk_in_callback - nonzero read bulk status received: -84 [ 56.278811] usb 1-1: USB disconnect, device number 3 [ 56.278856] usb 1-1: edge_bulk_in_callback - stopping read! [ 56.279562] BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8 [ 56.280536] IP: [] _raw_spin_lock_irqsave+0x19/0x35 [ 56.281212] PGD 1dc1b067 PUD 1e0f7067 PMD 0 [ 56.282085] Oops: 0002 [#1] SMP [ 56.282744] Modules linked in: [ 56.283512] CPU 1 [ 56.283512] Pid: 25, comm: khubd Not tainted 3.7.1 #1 innotek GmbH VirtualBox/VirtualBox [ 56.283512] RIP: 0010:[] [] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP: 0018:ffff88001fa99ab0 EFLAGS: 00010046 [ 56.283512] RAX: 0000000000000046 RBX: 00000000000001c8 RCX: 0000000000640064 [ 56.283512] RDX: 0000000000010000 RSI: ffff88001fa99b20 RDI: 00000000000001c8 [ 56.283512] RBP: ffff88001fa99b20 R08: 0000000000000000 R09: 0000000000000000 [ 56.283512] R10: 0000000000000000 R11: ffffffff812fcb4c R12: ffff88001ddf53c0 [ 56.283512] R13: 0000000000000000 R14: 00000000000001c8 R15: ffff88001e19b9f4 [ 56.283512] FS: 0000000000000000(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000 [ 56.283512] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 56.283512] CR2: 00000000000001c8 CR3: 000000001dc51000 CR4: 00000000000006e0 [ 56.283512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 56.283512] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 56.283512] Process khubd (pid: 25, threadinfo ffff88001fa98000, task ffff88001fa94f80) [ 56.283512] Stack: [ 56.283512] 0000000000000046 00000000000001c8 ffffffff810578ec ffffffff812fcb4c [ 56.283512] ffff88001e19b980 0000000000002710 ffffffff812ffe81 0000000000000001 [ 56.283512] ffff88001fa94f80 0000000000000202 ffffffff00000001 0000000000000296 [ 56.283512] Call Trace: [ 56.283512] [] ? add_wait_queue+0x12/0x3c [ 56.283512] [] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [] ? chase_port+0x84/0x2d6 [ 56.283512] [] ? try_to_wake_up+0x199/0x199 [ 56.283512] [] ? tty_ldisc_hangup+0x222/0x298 [ 56.283512] [] ? edge_close+0x64/0x129 [ 56.283512] [] ? __wake_up+0x35/0x46 [ 56.283512] [] ? should_resched+0x5/0x23 [ 56.283512] [] ? tty_port_shutdown+0x39/0x44 [ 56.283512] [] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [] ? __tty_hangup+0x307/0x351 [ 56.283512] [] ? usb_hcd_flush_endpoint+0xde/0xed [ 56.283512] [] ? _raw_spin_lock_irqsave+0x14/0x35 [ 56.283512] [] ? usb_serial_disconnect+0x57/0xc2 [ 56.283512] [] ? usb_unbind_interface+0x5c/0x131 [ 56.283512] [] ? __device_release_driver+0x7f/0xd5 [ 56.283512] [] ? device_release_driver+0x1a/0x25 [ 56.283512] [] ? bus_remove_device+0xd2/0xe7 [ 56.283512] [] ? device_del+0x119/0x167 [ 56.283512] [] ? usb_disable_device+0x6a/0x180 [ 56.283512] [] ? usb_disconnect+0x81/0xe6 [ 56.283512] [] ? hub_thread+0x577/0xe82 [ 56.283512] [] ? __schedule+0x490/0x4be [ 56.283512] [] ? abort_exclusive_wait+0x79/0x79 [ 56.283512] [] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [] ? kthread+0x81/0x89 [ 56.283512] [] ? __kthread_parkme+0x5c/0x5c [ 56.283512] [] ? ret_from_fork+0x7c/0xb0 [ 56.283512] [] ? __kthread_parkme+0x5c/0x5c [ 56.283512] Code: 8b 7c 24 08 e8 17 0b c3 ff 48 8b 04 24 48 83 c4 10 c3 53 48 89 fb 41 50 e8 e0 0a c3 ff 48 89 04 24 e8 e7 0a c3 ff ba 00 00 01 00 0f c1 13 48 8b 04 24 89 d1 c1 ea 10 66 39 d1 74 07 f3 90 66 [ 56.283512] RIP [] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP [ 56.283512] CR2: 00000000000001c8 [ 56.283512] ---[ end trace 49714df27e1679ce ]--- Signed-off-by: Wolfgang Frisch Cc: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_ti.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 58184f3de686..82afc4d6a327 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -530,6 +530,9 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout, wait_queue_t wait; unsigned long flags; + if (!tty) + return; + if (!timeout) timeout = (HZ * EDGE_CLOSING_WAIT)/100; From 7d1f9aeff1ee4a20b1aeb377dd0f579fe9647619 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 17 Jan 2013 19:25:45 -0800 Subject: [PATCH 451/553] Linux 3.8-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index a1667c4bcce5..253a455d8d8d 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 8 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Terrified Chipmunk # *DOCUMENTATION* From e04340375a314166e14519fca9e5b9e9394b2d7a Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 18 Jan 2013 12:00:47 +0100 Subject: [PATCH 452/553] ALSA: hda - Fix mute led for another HP machine This machine also has the "HP_Mute_LED_0_A" string in DMI information. Cc: BugLink: https://bugs.launchpad.net/bugs/1096789 Tested-by: Tammy Yang Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f5196277b6e9..6369b23a0bbf 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6251,6 +6251,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1025, 0x0349, "Acer AOD260", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_MIC2_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x1972, "HP Pavilion 17", ALC269_FIXUP_MIC1_MUTE_LED), + SND_PCI_QUIRK(0x103c, 0x1977, "HP Pavilion 14", ALC269_FIXUP_MIC1_MUTE_LED), SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_DMIC), SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_DMIC), SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), From 091a62c9b3d899d99dbf4e3dbebc8dfa3edbccdd Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 14 Dec 2012 21:30:27 +0300 Subject: [PATCH 453/553] usb: musb: cppi_dma: drop '__init' annotation This patch fixes the following: WARNING: vmlinux.o(.text+0x1e709c): Section mismatch in reference from the funct ion dma_controller_create() to the function .init.text:cppi_controller_start() The function dma_controller_create() references the function __init cppi_controller_start(). This is often because dma_controller_create lacks a __init annotation or the annotation of cppi_controller_start is wrong. This warning is there due to the deficiency in the commit 07a67bbb (usb: musb: Make dma_controller_create __devinit). Since the start() method is only called from musb_init_controller() which is not annotated, drop '__init' annotation from cppi_controller_start() and also cppi_pool_init() since it gets called from that function, to avoid another section mismatch warning... Signed-off-by: Sergei Shtylyov Cc: stable@vger.kernel.org # 3.7+ Signed-off-by: Felipe Balbi --- drivers/usb/musb/cppi_dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 0968dd7a859d..f522000e8f06 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -105,7 +105,7 @@ static void cppi_reset_tx(struct cppi_tx_stateram __iomem *tx, u32 ptr) musb_writel(&tx->tx_complete, 0, ptr); } -static void __init cppi_pool_init(struct cppi *cppi, struct cppi_channel *c) +static void cppi_pool_init(struct cppi *cppi, struct cppi_channel *c) { int j; @@ -150,7 +150,7 @@ static void cppi_pool_free(struct cppi_channel *c) c->last_processed = NULL; } -static int __init cppi_controller_start(struct dma_controller *c) +static int cppi_controller_start(struct dma_controller *c) { struct cppi *controller; void __iomem *tibase; From f0ea8834df058371d1e59012d4a67488429fb4a2 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 17 Jan 2013 18:03:15 +0800 Subject: [PATCH 454/553] usb: gadget: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id As mach/hardware.h is deleted, we need to use platform_device_id to differentiate SoCs. Besides, one cpu_is_mx35 is useless as it has already used pdata to differentiate runtime Meanwhile we update the platform code accordingly. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- arch/arm/mach-imx/devices/devices-common.h | 1 + .../mach-imx/devices/platform-fsl-usb2-udc.c | 15 ++++---- drivers/usb/gadget/fsl_mxc_udc.c | 22 +++++------ drivers/usb/gadget/fsl_udc_core.c | 38 +++++++++++-------- 4 files changed, 40 insertions(+), 36 deletions(-) diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 6277baf1b7be..9bd5777ff0e7 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan( #include struct imx_fsl_usb2_udc_data { + const char *devid; resource_size_t iobase; resource_size_t irq; }; diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c index 37e44398197b..3c06bd96e9cc 100644 --- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c @@ -11,35 +11,36 @@ #include "../hardware.h" #include "devices-common.h" -#define imx_fsl_usb2_udc_data_entry_single(soc) \ +#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \ { \ + .devid = _devid, \ .iobase = soc ## _USB_OTG_BASE_ADDR, \ .irq = soc ## _INT_USB_OTG, \ } #ifdef CONFIG_SOC_IMX25 const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX25); + imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX27); + imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX27 */ #ifdef CONFIG_SOC_IMX31 const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX31); + imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX31 */ #ifdef CONFIG_SOC_IMX35 const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX35); + imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX35 */ #ifdef CONFIG_SOC_IMX51 const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX51); + imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51"); #endif struct platform_device *__init imx_add_fsl_usb2_udc( @@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc( .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device_dmamask("fsl-usb2-udc", -1, + return imx_add_platform_device_dmamask(data->devid, -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index 1b0f086426bd..de851e530917 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -18,8 +18,6 @@ #include #include -#include - static struct clk *mxc_ahb_clk; static struct clk *mxc_per_clk; static struct clk *mxc_ipg_clk; @@ -59,7 +57,7 @@ int fsl_udc_clk_init(struct platform_device *pdev) clk_prepare_enable(mxc_per_clk); /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ - if (!cpu_is_mx51()) { + if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) { freq = clk_get_rate(mxc_per_clk); if (pdata->phy_mode != FSL_USB2_PHY_ULPI && (freq < 59999000 || freq > 60001000)) { @@ -82,17 +80,15 @@ eclkrate: void fsl_udc_clk_finalize(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - if (cpu_is_mx35()) { - unsigned int v; + unsigned int v; - /* workaround ENGcm09152 for i.MX35 */ - if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); - writel(v | USBPHYCTRL_EVDO, - MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); - } + /* workaround ENGcm09152 for i.MX35 */ + if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { + v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + + USBPHYCTRL_OTGBASE_OFFSET)); + writel(v | USBPHYCTRL_EVDO, + MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + + USBPHYCTRL_OTGBASE_OFFSET)); } /* ULPI transceivers don't need usbpll */ diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index c19f7f13790b..5fc1d724f38c 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include @@ -2438,11 +2439,6 @@ static int __init fsl_udc_probe(struct platform_device *pdev) unsigned int i; u32 dccparams; - if (strcmp(pdev->name, driver_name)) { - VDBG("Wrong device"); - return -ENODEV; - } - udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL); if (udc_controller == NULL) { ERR("malloc udc failed\n"); @@ -2756,22 +2752,32 @@ static int fsl_udc_otg_resume(struct device *dev) return fsl_udc_resume(NULL); } - /*------------------------------------------------------------------------- Register entry point for the peripheral controller driver --------------------------------------------------------------------------*/ - +static const struct platform_device_id fsl_udc_devtype[] = { + { + .name = "imx-udc-mx27", + }, { + .name = "imx-udc-mx51", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, fsl_udc_devtype); static struct platform_driver udc_driver = { - .remove = __exit_p(fsl_udc_remove), + .remove = __exit_p(fsl_udc_remove), + /* Just for FSL i.mx SoC currently */ + .id_table = fsl_udc_devtype, /* these suspend and resume are not usb suspend and resume */ - .suspend = fsl_udc_suspend, - .resume = fsl_udc_resume, - .driver = { - .name = (char *)driver_name, - .owner = THIS_MODULE, - /* udc suspend/resume called from OTG driver */ - .suspend = fsl_udc_otg_suspend, - .resume = fsl_udc_otg_resume, + .suspend = fsl_udc_suspend, + .resume = fsl_udc_resume, + .driver = { + .name = (char *)driver_name, + .owner = THIS_MODULE, + /* udc suspend/resume called from OTG driver */ + .suspend = fsl_udc_otg_suspend, + .resume = fsl_udc_otg_resume, }, }; From c2c9caa94748657ac8b47428ef4e95ccb646cea7 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 17 Jan 2013 18:03:16 +0800 Subject: [PATCH 455/553] usb: gadget: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap As mach/hardware.h is deleted, we can't visit platform code at driver. It has no phy driver to combine with this controller, so it has to use ioremap to map phy address as a workaround. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/fsl_mxc_udc.c | 30 +++++++++++++++++++++++------- drivers/usb/gadget/fsl_udc_core.c | 4 +++- drivers/usb/gadget/fsl_usb2_udc.h | 5 +++-- 3 files changed, 29 insertions(+), 10 deletions(-) diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index de851e530917..d3bd7b095ba3 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -23,7 +23,8 @@ static struct clk *mxc_per_clk; static struct clk *mxc_ipg_clk; /* workaround ENGcm09152 for i.MX35 */ -#define USBPHYCTRL_OTGBASE_OFFSET 0x608 +#define MX35_USBPHYCTRL_OFFSET 0x600 +#define USBPHYCTRL_OTGBASE_OFFSET 0x8 #define USBPHYCTRL_EVDO (1 << 23) int fsl_udc_clk_init(struct platform_device *pdev) @@ -77,25 +78,40 @@ eclkrate: return ret; } -void fsl_udc_clk_finalize(struct platform_device *pdev) +int fsl_udc_clk_finalize(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - unsigned int v; + int ret = 0; /* workaround ENGcm09152 for i.MX35 */ if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); + unsigned int v; + struct resource *res = platform_get_resource + (pdev, IORESOURCE_MEM, 0); + void __iomem *phy_regs = ioremap(res->start + + MX35_USBPHYCTRL_OFFSET, 512); + if (!phy_regs) { + dev_err(&pdev->dev, "ioremap for phy address fails\n"); + ret = -EINVAL; + goto ioremap_err; + } + + v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET); writel(v | USBPHYCTRL_EVDO, - MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); + phy_regs + USBPHYCTRL_OTGBASE_OFFSET); + + iounmap(phy_regs); } + +ioremap_err: /* ULPI transceivers don't need usbpll */ if (pdata->phy_mode == FSL_USB2_PHY_ULPI) { clk_disable_unprepare(mxc_per_clk); mxc_per_clk = NULL; } + + return ret; } void fsl_udc_clk_release(void) diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 5fc1d724f38c..667275cb7bad 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2543,7 +2543,9 @@ static int __init fsl_udc_probe(struct platform_device *pdev) dr_controller_setup(udc_controller); } - fsl_udc_clk_finalize(pdev); + ret = fsl_udc_clk_finalize(pdev); + if (ret) + goto err_free_irq; /* Setup gadget structure */ udc_controller->gadget.ops = &fsl_gadget_ops; diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index f61a967f7082..c6703bb07b23 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -592,15 +592,16 @@ static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep) struct platform_device; #ifdef CONFIG_ARCH_MXC int fsl_udc_clk_init(struct platform_device *pdev); -void fsl_udc_clk_finalize(struct platform_device *pdev); +int fsl_udc_clk_finalize(struct platform_device *pdev); void fsl_udc_clk_release(void); #else static inline int fsl_udc_clk_init(struct platform_device *pdev) { return 0; } -static inline void fsl_udc_clk_finalize(struct platform_device *pdev) +static inline int fsl_udc_clk_finalize(struct platform_device *pdev) { + return 0; } static inline void fsl_udc_clk_release(void) { From 61c4b560e9a42cbc4ce1b95a1bd59b01d449168d Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 17 Jan 2013 18:03:17 +0800 Subject: [PATCH 456/553] ARM: i.MX clock: Change the connection-id for fsl-usb2-udc As we use platform_device_id for fsl-usb2-udc driver, it needs to change clk connection-id, or the related devm_clk_get will be failed. Signed-off-by: Peter Chen Acked-by: Shawn Guo Signed-off-by: Felipe Balbi --- arch/arm/mach-imx/clk-imx25.c | 6 +++--- arch/arm/mach-imx/clk-imx27.c | 6 +++--- arch/arm/mach-imx/clk-imx31.c | 6 +++--- arch/arm/mach-imx/clk-imx35.c | 6 +++--- arch/arm/mach-imx/clk-imx51-imx53.c | 6 +++--- 5 files changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index b197aa73dc4b..2c570cdaae7b 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -254,9 +254,9 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2"); clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); + clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); + clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0"); /* i.mx25 has the i.mx35 type cspi */ clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0"); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 4c1d1e4efc74..1ffe3b534e51 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0"); clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0"); clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0"); - clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); + clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27"); clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0"); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 8be64e0a4ace..16ccbd41dea9 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2"); clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc"); - clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); + clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27"); + clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); /* i.mx31 has the i.mx21 type uart */ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 66f3d65ea275..f0727e80815d 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -251,9 +251,9 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc"); + clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); + clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); + clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27"); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 579023f59dc1..fb7cb841b64c 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2"); clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2"); clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc"); + clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51"); + clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51"); + clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51"); clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand"); clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); From 6048e4c69d80600baba35856651056860d5d8f5a Mon Sep 17 00:00:00 2001 From: Pratyush Anand Date: Fri, 18 Jan 2013 16:53:56 +0530 Subject: [PATCH 457/553] usb: dwc3: gadget: fix ep->maxburst for ep0 dwc3_gadget_set_ep_config expects maxburst as incremented by 1. So, by default initialize ep->maxburst to 1 for ep0. Cc: Signed-off-by: Pratyush Anand Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 2e43b332aae8..2fdd767f8fe8 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1605,6 +1605,7 @@ static int dwc3_gadget_init_endpoints(struct dwc3 *dwc) if (epnum == 0 || epnum == 1) { dep->endpoint.maxpacket = 512; + dep->endpoint.maxburst = 1; dep->endpoint.ops = &dwc3_gadget_ep0_ops; if (!epnum) dwc->gadget.ep0 = &dep->endpoint; From b810075002c9f25a6da83cecda39d789000a04a9 Mon Sep 17 00:00:00 2001 From: Benoit Goby Date: Tue, 8 Jan 2013 19:57:09 -0800 Subject: [PATCH 458/553] usb: gadget: FunctionFS: Fix missing braces in parse_opts Add missing braces around an if block in ffs_fs_parse_opts. This broke parsing the uid/gid mount options and causes mount to fail when using uid/gid. This has been introduced by commit b9b73f7c (userns: Convert usb functionfs to use kuid/kgid where appropriate) in 3.7. Cc: Signed-off-by: Benoit Goby Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_fs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 4a6961c517f2..8c2f25121149 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -1153,15 +1153,15 @@ static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts) pr_err("%s: unmapped value: %lu\n", opts, value); return -EINVAL; } - } - else if (!memcmp(opts, "gid", 3)) + } else if (!memcmp(opts, "gid", 3)) { data->perms.gid = make_kgid(current_user_ns(), value); if (!gid_valid(data->perms.gid)) { pr_err("%s: unmapped value: %lu\n", opts, value); return -EINVAL; } - else + } else { goto invalid; + } break; default: From 6f8c2e7933679f54b6478945dc72e59ef9a3d5e0 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 16 Jan 2013 23:40:01 +0100 Subject: [PATCH 459/553] intel_idle: Don't register CPU notifier if we are not running. The 'intel_idle_probe' probes the CPU and sets the CPU notifier. But if later on during the module initialization we fail (say in cpuidle_register_driver), we stop loading, but we neglect to unregister the CPU notifier. This means that during CPU hotplug events the system will fail: calling intel_idle_init+0x0/0x326 @ 1 intel_idle: MWAIT substates: 0x1120 intel_idle: v0.4 model 0x2A intel_idle: lapic_timer_reliable_states 0xffffffff intel_idle: intel_idle yielding to none initcall intel_idle_init+0x0/0x326 returned -19 after 14 usecs ... some time later, offlining and onlining a CPU: cpu 3 spinlock event irq 62 BUG: unable to ] __cpuidle_register_device+0x1c/0x120 PGD 99b8b067 PUD 99b95067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: xen_evtchn nouveau mxm_wmi wmi radeon ttm i915 fbcon tileblit font atl1c bitblit softcursor drm_kms_helper video xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd mperf CPU 0 Pid: 2302, comm: udevd Not tainted 3.8.0-rc3upstream-00249-g09ad159 #1 MSI MS-7680/H61M-P23 (MS-7680) RIP: e030:[] [] __cpuidle_register_device+0x1c/0x120 RSP: e02b:ffff88009dacfcb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff880105380000 RCX: 000000000000001c RDX: 0000000000000000 RSI: 0000000000000055 RDI: ffff880105380000 RBP: ffff88009dacfce8 R08: ffffffff81a4f048 R09: 0000000000000008 R10: 0000000000000008 R11: 0000000000000000 R12: ffff880105380000 R13: 00000000ffffffdd R14: 0000000000000000 R15: ffffffff81a523d0 FS: 00007f37bd83b7a0(0000) GS:ffff880105200000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 00000000a09ea000 CR4: 0000000000042660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process udevd (pid: 2302, threadinfo ffff88009dace000, task ffff88009afb47f0) Stack: ffffffff8107f2d0 ffffffff810c2fb7 ffff88009dacfce8 00000000ffffffea ffff880105380000 00000000ffffffdd ffff88009dacfd08 ffffffff814d9882 0000000000000003 ffff880105380000 ffff88009dacfd28 ffffffff81340afd Call Trace: [] ? collect_cpu_info_local+0x30/0x30 [] ? __might_sleep+0xe7/0x100 [] cpuidle_register_device+0x32/0x70 [] intel_idle_cpu_init+0xad/0x110 [] cpu_hotplug_notify+0x68/0x80 [] notifier_call_chain+0x4d/0x70 [] __raw_notifier_call_chain+0x9/0x10 [] __cpu_notify+0x1b/0x30 [] _cpu_up+0x103/0x14b [] cpu_up+0xd9/0xec [] store_online+0x94/0xd0 [] dev_attr_store+0x1b/0x20 [] sysfs_write_file+0xf4/0x170 [] vfs_write+0xb4/0x130 [] sys_write+0x5a/0xa0 [] system_call_fastpath+0x16/0x1b Code: 03 18 00 c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 ec 30 48 89 5d e8 4c 89 65 f0 48 89 fb 4c 89 6d f8 e8 84 08 00 00 <48> 8b 78 08 49 89 c4 e8 f8 7f c1 ff 89 c2 b8 ea ff ff ff 84 d2 RIP [] __cpuidle_register_device+0x1c/0x120 RSP This patch fixes that by moving the CPU notifier registration as the last item to be done by the module. Signed-off-by: Konrad Rzeszutek Wilk Reviewed-by: Srivatsa S. Bhat Cc: 3.6+ Signed-off-by: Rafael J. Wysocki --- drivers/idle/intel_idle.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 4ba384f1ab54..2df9414a72f7 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -448,8 +448,6 @@ static int intel_idle_probe(void) else on_each_cpu(__setup_broadcast_timer, (void *)true, 1); - register_cpu_notifier(&cpu_hotplug_notifier); - pr_debug(PREFIX "v" INTEL_IDLE_VERSION " model 0x%X\n", boot_cpu_data.x86_model); @@ -612,6 +610,7 @@ static int __init intel_idle_init(void) return retval; } } + register_cpu_notifier(&cpu_hotplug_notifier); return 0; } From b88a634a903d9670aa5f2f785aa890628ce0dece Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 16 Jan 2013 23:40:07 +0100 Subject: [PATCH 460/553] ACPI / cpuidle: Fix NULL pointer issues when cpuidle is disabled If cpuidle is disabled, that means that: per_cpu(acpi_cpuidle_device, pr->id) is set to NULL as the acpi_processor_power_init ends up failing at retval = cpuidle_register_driver(&acpi_idle_driver) (in acpi_processor_power_init) and never sets the per_cpu idle device. So when acpi_processor_hotplug on CPU online notification tries to reference said device it crashes: cpu 3 spinlock event irq 62 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [] acpi_processor_setup_cpuidle_cx+0x3f/0x105 PGD a259b067 PUD ab38b067 PMD 0 Oops: 0002 [#1] SMP odules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi libcrc32c crc32c nouveau mxm_wmi wmi radeon ttm sg sr_mod sd_mod cdrom ata_generic ata_piix libata crc32c_intel scsi_mod atl1c i915 fbcon tileblit font bitblit softcursor drm_kms_helper video xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd mperf CPU 1 Pid: 3047, comm: bash Not tainted 3.8.0-rc3upstream-00250-g165c029 #1 MSI MS-7680/H61M-P23 (MS-7680) RIP: e030:[] [] acpi_processor_setup_cpuidle_cx+0x3f/0x105 RSP: e02b:ffff88001742dca8 EFLAGS: 00010202 RAX: 0000000000010be9 RBX: ffff8800a0a61800 RCX: ffff880105380000 RDX: 0000000000000003 RSI: 0000000000000200 RDI: ffff8800a0a61800 RBP: ffff88001742dce8 R08: ffffffff81812360 R09: 0000000000000200 R10: aaaaaaaaaaaaaaaa R11: 0000000000000001 R12: ffff8800a0a61800 R13: 00000000ffffff01 R14: 0000000000000000 R15: ffffffff81a907a0 FS: 00007fd6942f7700(0000) GS:ffff880105280000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000004 CR3: 00000000a6773000 CR4: 0000000000042660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process bash (pid: 3047, threadinfo ffff88001742c000, task ffff880017944000) Stack: 0000000000000150 ffff880100f59e00 ffff88001742dcd8 ffff8800a0a61800 0000000000000000 00000000ffffff01 0000000000000000 ffffffff81a907a0 ffff88001742dd18 ffffffff813815b1 ffff88001742dd08 ffffffff810ae336 Call Trace: [] acpi_processor_hotplug+0x7c/0x9f [] ? schedule_delayed_work_on+0x16/0x20 [] acpi_cpu_soft_notify+0x90/0xca [] notifier_call_chain+0x4d/0x70 [] __raw_notifier_call_chain+0x9/0x10 [] __cpu_notify+0x1b/0x30 [] _cpu_up+0x103/0x14b [] cpu_up+0xd9/0xec [] store_online+0x94/0xd0 [] dev_attr_store+0x1b/0x20 [] sysfs_write_file+0xf4/0x170 This patch fixes it. Signed-off-by: Konrad Rzeszutek Wilk Cc: Signed-off-by: Rafael J. Wysocki --- drivers/acpi/processor_idle.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f1a5da44591d..fea6f8d71fa3 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -958,6 +958,9 @@ static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr) return -EINVAL; } + if (!dev) + return -EINVAL; + dev->cpu = pr->id; if (max_cstate == 0) From 631e8ac18fd59722e7ceb15fceeef3f368c250f9 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 18 Jan 2013 00:19:37 +0100 Subject: [PATCH 461/553] powernow-k8: Add a kconfig dependency on acpi-cpufreq Andreas reports in https://bugzilla.kernel.org/show_bug.cgi?id=51741 that with his Gentoo config, acpi-cpufreq wasn't enabled and powernow-k8 couldn't handoff properly to acpi-cpufreq leading to running without P-state support (i.e., cores are constantly in P0). To alleaviate that, we need to make powernow-k8 depend on acpi-cpufreq so that acpi-cpufreq is always present. References: https://bugzilla.kernel.org/show_bug.cgi?id=51741 Reported-by: Andreas Signed-off-by: Borislav Petkov Cc: 3.7+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/Kconfig.x86 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index 934854ae5eb4..7227cd734042 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -106,7 +106,7 @@ config X86_POWERNOW_K7_ACPI config X86_POWERNOW_K8 tristate "AMD Opteron/Athlon64 PowerNow!" select CPU_FREQ_TABLE - depends on ACPI && ACPI_PROCESSOR + depends on ACPI && ACPI_PROCESSOR && X86_ACPI_CPUFREQ help This adds the CPUFreq driver for K8/early Opteron/Athlon64 processors. Support for K10 and newer processors is now in acpi-cpufreq. From 2f91ec8cc456d6e57db3ebced34a9e96a356168f Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Wed, 26 Dec 2012 03:19:55 +0300 Subject: [PATCH 462/553] asm-generic, mm: pgtable: convert my_zero_pfn() to macros to fix build Commit 816422ad7647 ("asm-generic, mm: pgtable: consolidate zero page helpers") broke the compile on MIPS if SPARSEMEM is enabled. We get this: In file included from arch/mips/include/asm/pgtable.h:552, from include/linux/mm.h:44, from arch/mips/kernel/asm-offsets.c:14: include/asm-generic/pgtable.h: In function 'my_zero_pfn': include/asm-generic/pgtable.h:466: error: implicit declaration of function 'page_to_section' In file included from arch/mips/kernel/asm-offsets.c:14: include/linux/mm.h: At top level: include/linux/mm.h:738: error: conflicting types for 'page_to_section' include/asm-generic/pgtable.h:466: note: previous implicit declaration of 'page_to_section' was here Due header files inter-dependencies, the only way I see to fix it is convert my_zero_pfn() for __HAVE_COLOR_ZERO_PAGE to macros. Signed-off-by: Kirill A. Shutemov Tested-by: Aaro Koskinen Acked-by: David Daney Cc: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/pgtable.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 701beab27aab..5cf680a98f9b 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -461,10 +461,8 @@ static inline int is_zero_pfn(unsigned long pfn) return offset_from_zero_pfn <= (zero_page_mask >> PAGE_SHIFT); } -static inline unsigned long my_zero_pfn(unsigned long addr) -{ - return page_to_pfn(ZERO_PAGE(addr)); -} +#define my_zero_pfn(addr) page_to_pfn(ZERO_PAGE(addr)) + #else static inline int is_zero_pfn(unsigned long pfn) { From f427e5f1cf75bba84cccdac1d8a90552d9ae1065 Mon Sep 17 00:00:00 2001 From: Thomas Schlichter Date: Sat, 19 Jan 2013 00:28:22 +0100 Subject: [PATCH 463/553] ACPI / processor: Get power info before updating the C-states acpi_processor_get_power_info() has to be called before acpi_processor_setup_cpuidle_states() to have the latest information available. This fixes the missing C-state information after AC-->DC transition. Signed-off-by: Thomas Schlichter Cc: Signed-off-by: Rafael J. Wysocki --- drivers/acpi/processor_idle.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index fea6f8d71fa3..ed9a1cc690be 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1152,6 +1152,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) } /* Populate Updated C-state information */ + acpi_processor_get_power_info(pr); acpi_processor_setup_cpuidle_states(pr); /* Enable all cpuidle devices */ From 981827a2b7f896de1bdf6c2e185bed4fc1a5200f Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 18 Jan 2013 16:48:15 -0700 Subject: [PATCH 464/553] ARM: OMAP4: clock data: Lock ABE DPLL on all revisions To avoid issues with audio caused by non locked ABE DPLL we should make sure it is locked in all OMAP4 revisions. Signed-off-by: Peter Ujfalusi Acked-by: Jon Hunter [paul@pwsan.com: cleaned up patch description] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cclock44xx_data.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 5789a5e25563..a2cc046b47f4 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -2026,14 +2026,13 @@ int __init omap4xxx_clk_init(void) * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power * state when turning the ABE clock domain. Workaround this by * locking the ABE DPLL on boot. + * Lock the ABE DPLL in any case to avoid issues with audio. */ - if (cpu_is_omap446x()) { - rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck); - if (!rc) - rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ); - if (rc) - pr_err("%s: failed to configure ABE DPLL!\n", __func__); - } + rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck); + if (!rc) + rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ); + if (rc) + pr_err("%s: failed to configure ABE DPLL!\n", __func__); return 0; } From 12d82e4b0aa6c71f38b668a372f9a13f243207da Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 18 Jan 2013 16:48:16 -0700 Subject: [PATCH 465/553] ARM: OMAP4: hwmod_data: Correct IDLEMODE for McPDM McPDM need to be configured to NO_IDLE mode when it is in used otherwise vital clocks will be gated which results 'slow motion' audio playback. Signed-off-by: Peter Ujfalusi [paul@pwsan.com: copy patch description into hwmod data comments] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 129d5081ed15..793f54ac7d14 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2132,8 +2132,12 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = { * currently reset very early during boot, before I2C is * available, so it doesn't seem that we have any choice in * the kernel other than to avoid resetting it. + * + * Also, McPDM needs to be configured to NO_IDLE mode when it + * is in used otherwise vital clocks will be gated which + * results 'slow motion' audio playback. */ - .flags = HWMOD_EXT_OPT_MAIN_CLK, + .flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE, .mpu_irqs = omap44xx_mcpdm_irqs, .sdma_reqs = omap44xx_mcpdm_sdma_reqs, .main_clk = "mcpdm_fck", From bdcc61275232db897ba831f87a16df98ab248571 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Fri, 18 Jan 2013 16:48:16 -0700 Subject: [PATCH 466/553] ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls During the migration to the common clock framework, calls to the functions omap2xxx_clkt_vps_late_init() were not preserved for OMAP2420 and OMAP2430. This causes the variables "sys_ck_rate" and "curr_prcm_set" to be uninitialised on boot. On reboot, this causes the following error message to be displayed because the appropriate MPU clock frequency (derived from sys_ck_rate) cannot be found. "Could not set MPU rate to 4294MHz" Fix this by adding back calls to omap2xxx_clkt_vps_late_init() in the OMAP2420 and OMAP2430 clock initialisation code. Signed-off-by: Jon Hunter [paul@pwsan.com: dropped the duplicated call to omap2xxx_clkt_vps_check_bootloader_rates() after consultation with Jon; updated patch description] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cclock2420_data.c | 2 ++ arch/arm/mach-omap2/cclock2430_data.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c index 7e5febe456d9..ab7e952d2070 100644 --- a/arch/arm/mach-omap2/cclock2420_data.c +++ b/arch/arm/mach-omap2/cclock2420_data.c @@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void) omap2_init_clk_hw_omap_clocks(c->lk.clk); } + omap2xxx_clkt_vps_late_init(); + omap2_clk_disable_autoidle_all(); omap2_clk_enable_init_clocks(enable_init_clks, diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c index eda079b96c6a..eb3dab68d536 100644 --- a/arch/arm/mach-omap2/cclock2430_data.c +++ b/arch/arm/mach-omap2/cclock2430_data.c @@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void) omap2_init_clk_hw_omap_clocks(c->lk.clk); } + omap2xxx_clkt_vps_late_init(); + omap2_clk_disable_autoidle_all(); omap2_clk_enable_init_clocks(enable_init_clks, From 25216865392a6e1f3032855aee7407de1fe0b70c Mon Sep 17 00:00:00 2001 From: Lans Zhang Date: Wed, 16 Jan 2013 09:03:29 +0000 Subject: [PATCH 467/553] ACPI, APEI: Fixup incorrect 64-bit access width firmware bug The bit width check was introduced by 15afae60 (ACPI, APEI: Fix incorrect APEI register bit width check and usage), and a fixup for incorrect 32-bit width memory address was given by f712c71 (ACPI, APEI: Fixup common access width firmware bug). Now there is a similar symptom: [Firmware Bug]: APEI: Invalid bit width + offset in GAR [0x12345000/64/0/3/0] Another bogus BIOS reports an incorrect 64-bit width in trigger table. Thus, apply to a similar workaround for 64-bit width memory address. Signed-off-by: Lans Zhang Acked-by: Gary Hade Acked-by: Myron Stowe Acked-by: Jean Delvare Signed-off-by: Rafael J. Wysocki --- drivers/acpi/apei/apei-base.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index 00a783661d0b..46f80e2c92f7 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -590,6 +590,9 @@ static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr, if (bit_width == 32 && bit_offset == 0 && (*paddr & 0x03) == 0 && *access_bit_width < 32) *access_bit_width = 32; + else if (bit_width == 64 && bit_offset == 0 && (*paddr & 0x07) == 0 && + *access_bit_width < 64) + *access_bit_width = 64; if ((bit_width + bit_offset) > *access_bit_width) { pr_warning(FW_BUG APEI_PFX From 15653371c67c3fbe359ae37b720639dd4c7b42c5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 19 Jan 2013 11:05:57 +0000 Subject: [PATCH 468/553] ARM: DMA: Fix struct page iterator in dma_cache_maint() to work with sparsemem Subhash Jadavani reported this partial backtrace: Now consider this call stack from MMC block driver (this is on the ARMv7 based board): [] (v7_dma_inv_range+0x30/0x48) from [] (dma_cache_maint_page+0x1c4/0x24c) [] (dma_cache_maint_page+0x1c4/0x24c) from [] (___dma_page_cpu_to_dev+0x14/0x1c) [] (___dma_page_cpu_to_dev+0x14/0x1c) from [] (dma_map_sg+0x3c/0x114) This is caused by incrementing the struct page pointer, and running off the end of the sparsemem page array. Fix this by incrementing by pfn instead, and convert the pfn to a struct page. Cc: Suggested-by: James Bottomley Tested-by: Subhash Jadavani Signed-off-by: Russell King --- arch/arm/mm/dma-mapping.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 6b2fb87c8698..076c26d43864 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -774,25 +774,27 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, void (*op)(const void *, size_t, int)) { + unsigned long pfn; + size_t left = size; + + pfn = page_to_pfn(page) + offset / PAGE_SIZE; + offset %= PAGE_SIZE; + /* * A single sg entry may refer to multiple physically contiguous * pages. But we still need to process highmem pages individually. * If highmem is not configured then the bulk of this loop gets * optimized out. */ - size_t left = size; do { size_t len = left; void *vaddr; + page = pfn_to_page(pfn); + if (PageHighMem(page)) { - if (len + offset > PAGE_SIZE) { - if (offset >= PAGE_SIZE) { - page += offset / PAGE_SIZE; - offset %= PAGE_SIZE; - } + if (len + offset > PAGE_SIZE) len = PAGE_SIZE - offset; - } vaddr = kmap_high_get(page); if (vaddr) { vaddr += offset; @@ -809,7 +811,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, op(vaddr, len, dir); } offset = 0; - page++; + pfn++; left -= len; } while (left); } From ec50b4cea63fdcd1f1c428b93a47986d74c244b8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 19 Jan 2013 12:17:54 +0100 Subject: [PATCH 469/553] ALSA: hda - Add fixup for Acer AO725 laptop Acer AO725 needs the same fixup as AO756. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6369b23a0bbf..cf3886171109 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6266,6 +6266,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x104d, 0x9084, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ), SND_PCI_QUIRK_VENDOR(0x104d, "Sony VAIO", ALC269_FIXUP_SONY_VAIO), SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z), + SND_PCI_QUIRK(0x1025, 0x0740, "Acer AO725", ALC271_FIXUP_HP_GATE_MIC_JACK), SND_PCI_QUIRK(0x1025, 0x0742, "Acer AO756", ALC271_FIXUP_HP_GATE_MIC_JACK), SND_PCI_QUIRK_VENDOR(0x1025, "Acer Aspire", ALC271_FIXUP_DMIC), SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook", ALC269_FIXUP_LIFEBOOK), From 93d5bf073a1e01035be66dc41860b9ae9aa9ccfa Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 17 Jan 2013 07:18:04 +0100 Subject: [PATCH 470/553] ARM: 7629/1: mm: Fix missing XN flag for for MT_MEMORY_SO Commit 8fb54284ba6a {ARM: mm: Add strongly ordered descriptor support} added XN flag at section level but missed it at PTE level. Fix it by adding the L_PTE_XN to MT_MEMORY_SO PTE descriptor. Reported-by: Richard Woodruff Signed-off-by: Santosh Shilimkar Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 9f0610243bd6..ce328c7f5c94 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -283,7 +283,7 @@ static struct mem_type mem_types[] = { }, [MT_MEMORY_SO] = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_MT_UNCACHED, + L_PTE_MT_UNCACHED | L_PTE_XN, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S | PMD_SECT_UNCACHED | PMD_SECT_XN, From 43b16820249396aea7eb57c747106e211e54bed5 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 19 Jan 2013 13:29:54 -0500 Subject: [PATCH 471/553] make sure that /linuxrc has std{in,out,err} Signed-off-by: Al Viro --- init/do_mounts_initrd.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/init/do_mounts_initrd.c b/init/do_mounts_initrd.c index 5e4ded51788e..f9acf71b9810 100644 --- a/init/do_mounts_initrd.c +++ b/init/do_mounts_initrd.c @@ -36,6 +36,10 @@ __setup("noinitrd", no_initrd); static int init_linuxrc(struct subprocess_info *info, struct cred *new) { sys_unshare(CLONE_FS | CLONE_FILES); + /* stdin/stdout/stderr for /linuxrc */ + sys_open("/dev/console", O_RDWR, 0); + sys_dup(0); + sys_dup(0); /* move initrd over / and chdir/chroot in initrd root */ sys_chdir("/root"); sys_mount(".", "/", NULL, MS_MOVE, NULL); From b1e0318b8cd4bdbb0fbc48967b0350483ad9bd69 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 19 Jan 2013 22:13:34 -0500 Subject: [PATCH 472/553] sys_clone() needs asmlinkage_protect Cc: stable@vger.kernel.org Signed-off-by: Al Viro --- kernel/fork.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/kernel/fork.c b/kernel/fork.c index a31b823b3c2d..e05cff2429b5 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1660,8 +1660,10 @@ SYSCALL_DEFINE5(clone, unsigned long, clone_flags, unsigned long, newsp, int, tls_val) #endif { - return do_fork(clone_flags, newsp, 0, - parent_tidptr, child_tidptr); + long ret = do_fork(clone_flags, newsp, 0, parent_tidptr, child_tidptr); + asmlinkage_protect(5, ret, clone_flags, newsp, + parent_tidptr, child_tidptr, tls_val); + return ret; } #endif From ed0fb78fb6aa294a719f8f5654fdff0ec8bc00bc Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Sun, 20 Jan 2013 15:57:57 +0200 Subject: [PATCH 473/553] Btrfs: bring back balance pause/resume logic Balance pause/resume logic got broken by 5ac00add (went in into 3.8-rc1 as part of dev-replace merge). Offending commit took a stab at making mutually exclusive volume operations (add_dev, rm_dev, resize, balance, replace_dev) not block behind volume_mutex if another such operation is in progress and instead return an error right away. Balancing front-end relied on the blocking behaviour, so the fix is ugly, but short of a complete rework, it's the best we can do. Reported-by: Liu Bo Signed-off-by: Ilya Dryomov --- fs/btrfs/ioctl.c | 78 +++++++++++++++++++++++++++++++++++++--------- fs/btrfs/volumes.c | 10 ++++-- 2 files changed, 71 insertions(+), 17 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 982c0b9ceea5..77d8273e394c 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3440,8 +3440,8 @@ static long btrfs_ioctl_balance(struct file *file, void __user *arg) struct btrfs_fs_info *fs_info = root->fs_info; struct btrfs_ioctl_balance_args *bargs; struct btrfs_balance_control *bctl; + bool need_unlock; /* for mut. excl. ops lock */ int ret; - int need_to_clear_lock = 0; if (!capable(CAP_SYS_ADMIN)) return -EPERM; @@ -3450,14 +3450,61 @@ static long btrfs_ioctl_balance(struct file *file, void __user *arg) if (ret) return ret; - mutex_lock(&fs_info->volume_mutex); +again: + if (!atomic_xchg(&fs_info->mutually_exclusive_operation_running, 1)) { + mutex_lock(&fs_info->volume_mutex); + mutex_lock(&fs_info->balance_mutex); + need_unlock = true; + goto locked; + } + + /* + * mut. excl. ops lock is locked. Three possibilites: + * (1) some other op is running + * (2) balance is running + * (3) balance is paused -- special case (think resume) + */ mutex_lock(&fs_info->balance_mutex); + if (fs_info->balance_ctl) { + /* this is either (2) or (3) */ + if (!atomic_read(&fs_info->balance_running)) { + mutex_unlock(&fs_info->balance_mutex); + if (!mutex_trylock(&fs_info->volume_mutex)) + goto again; + mutex_lock(&fs_info->balance_mutex); + + if (fs_info->balance_ctl && + !atomic_read(&fs_info->balance_running)) { + /* this is (3) */ + need_unlock = false; + goto locked; + } + + mutex_unlock(&fs_info->balance_mutex); + mutex_unlock(&fs_info->volume_mutex); + goto again; + } else { + /* this is (2) */ + mutex_unlock(&fs_info->balance_mutex); + ret = -EINPROGRESS; + goto out; + } + } else { + /* this is (1) */ + mutex_unlock(&fs_info->balance_mutex); + pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); + ret = -EINVAL; + goto out; + } + +locked: + BUG_ON(!atomic_read(&fs_info->mutually_exclusive_operation_running)); if (arg) { bargs = memdup_user(arg, sizeof(*bargs)); if (IS_ERR(bargs)) { ret = PTR_ERR(bargs); - goto out; + goto out_unlock; } if (bargs->flags & BTRFS_BALANCE_RESUME) { @@ -3477,13 +3524,10 @@ static long btrfs_ioctl_balance(struct file *file, void __user *arg) bargs = NULL; } - if (atomic_xchg(&root->fs_info->mutually_exclusive_operation_running, - 1)) { - pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); + if (fs_info->balance_ctl) { ret = -EINPROGRESS; goto out_bargs; } - need_to_clear_lock = 1; bctl = kzalloc(sizeof(*bctl), GFP_NOFS); if (!bctl) { @@ -3504,11 +3548,17 @@ static long btrfs_ioctl_balance(struct file *file, void __user *arg) } do_balance: - ret = btrfs_balance(bctl, bargs); /* - * bctl is freed in __cancel_balance or in free_fs_info if - * restriper was paused all the way until unmount + * Ownership of bctl and mutually_exclusive_operation_running + * goes to to btrfs_balance. bctl is freed in __cancel_balance, + * or, if restriper was paused all the way until unmount, in + * free_fs_info. mutually_exclusive_operation_running is + * cleared in __cancel_balance. */ + need_unlock = false; + + ret = btrfs_balance(bctl, bargs); + if (arg) { if (copy_to_user(arg, bargs, sizeof(*bargs))) ret = -EFAULT; @@ -3516,12 +3566,12 @@ do_balance: out_bargs: kfree(bargs); -out: - if (need_to_clear_lock) - atomic_set(&root->fs_info->mutually_exclusive_operation_running, - 0); +out_unlock: mutex_unlock(&fs_info->balance_mutex); mutex_unlock(&fs_info->volume_mutex); + if (need_unlock) + atomic_set(&fs_info->mutually_exclusive_operation_running, 0); +out: mnt_drop_write_file(file); return ret; } diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 86279c37de64..9c84dbe64f18 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2959,6 +2959,8 @@ static void __cancel_balance(struct btrfs_fs_info *fs_info) unset_balance_control(fs_info); ret = del_balance_item(fs_info->tree_root); BUG_ON(ret); + + atomic_set(&fs_info->mutually_exclusive_operation_running, 0); } void update_ioctl_balance_args(struct btrfs_fs_info *fs_info, int lock, @@ -3138,8 +3140,10 @@ int btrfs_balance(struct btrfs_balance_control *bctl, out: if (bctl->flags & BTRFS_BALANCE_RESUME) __cancel_balance(fs_info); - else + else { kfree(bctl); + atomic_set(&fs_info->mutually_exclusive_operation_running, 0); + } return ret; } @@ -3156,7 +3160,6 @@ static int balance_kthread(void *data) ret = btrfs_balance(fs_info->balance_ctl, NULL); } - atomic_set(&fs_info->mutually_exclusive_operation_running, 0); mutex_unlock(&fs_info->balance_mutex); mutex_unlock(&fs_info->volume_mutex); @@ -3179,7 +3182,6 @@ int btrfs_resume_balance_async(struct btrfs_fs_info *fs_info) return 0; } - WARN_ON(atomic_xchg(&fs_info->mutually_exclusive_operation_running, 1)); tsk = kthread_run(balance_kthread, fs_info, "btrfs-balance"); if (IS_ERR(tsk)) return PTR_ERR(tsk); @@ -3233,6 +3235,8 @@ int btrfs_recover_balance(struct btrfs_fs_info *fs_info) btrfs_balance_sys(leaf, item, &disk_bargs); btrfs_disk_balance_args_to_cpu(&bctl->sys, &disk_bargs); + WARN_ON(atomic_xchg(&fs_info->mutually_exclusive_operation_running, 1)); + mutex_lock(&fs_info->volume_mutex); mutex_lock(&fs_info->balance_mutex); From 2c0c9da02a2c4289350da6e54202a86602c0f926 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Sun, 20 Jan 2013 15:57:57 +0200 Subject: [PATCH 474/553] Btrfs: fix "mutually exclusive op is running" error code The error code that is returned in response to starting a mutually exclusive operation when there is one already running got silently changed from EINVAL to EINPROGRESS by 5ac00add. Returning EINPROGRESS to, say, add_dev, when rm_dev is running is misleading. Furthermore, the operation itself may want to use EINPROGRESS for other purposes. Signed-off-by: Ilya Dryomov --- fs/btrfs/ioctl.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 77d8273e394c..259dd52d8785 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1340,7 +1340,7 @@ static noinline int btrfs_ioctl_resize(struct file *file, 1)) { pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); mnt_drop_write_file(file); - return -EINPROGRESS; + return -EINVAL; } mutex_lock(&root->fs_info->volume_mutex); @@ -2192,7 +2192,7 @@ static int btrfs_ioctl_defrag(struct file *file, void __user *argp) if (atomic_xchg(&root->fs_info->mutually_exclusive_operation_running, 1)) { pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); - return -EINPROGRESS; + return -EINVAL; } ret = mnt_want_write_file(file); if (ret) { @@ -2266,7 +2266,7 @@ static long btrfs_ioctl_add_dev(struct btrfs_root *root, void __user *arg) if (atomic_xchg(&root->fs_info->mutually_exclusive_operation_running, 1)) { pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); - return -EINPROGRESS; + return -EINVAL; } mutex_lock(&root->fs_info->volume_mutex); @@ -2303,7 +2303,7 @@ static long btrfs_ioctl_rm_dev(struct file *file, void __user *arg) 1)) { pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); mnt_drop_write_file(file); - return -EINPROGRESS; + return -EINVAL; } mutex_lock(&root->fs_info->volume_mutex); From 18f39c416d18d74ac11d157e44247253d3fa30ae Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Sun, 20 Jan 2013 15:57:57 +0200 Subject: [PATCH 475/553] Btrfs: fix unlock order in btrfs_ioctl_resize Fix unlock order in btrfs_ioctl_resize(). Signed-off-by: Ilya Dryomov --- fs/btrfs/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 259dd52d8785..fcf1b1b40082 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1446,8 +1446,8 @@ out_free: kfree(vol_args); out: mutex_unlock(&root->fs_info->volume_mutex); - mnt_drop_write_file(file); atomic_set(&root->fs_info->mutually_exclusive_operation_running, 0); + mnt_drop_write_file(file); return ret; } From 4ac20c70b0734b65662ded735e5f6ba0415bdb71 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Sun, 20 Jan 2013 15:57:57 +0200 Subject: [PATCH 476/553] Btrfs: fix unlock order in btrfs_ioctl_rm_dev Fix unlock order in btrfs_ioctl_rm_dev(). Signed-off-by: Ilya Dryomov --- fs/btrfs/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index fcf1b1b40082..f5c1c150d9f3 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2319,8 +2319,8 @@ static long btrfs_ioctl_rm_dev(struct file *file, void __user *arg) kfree(vol_args); out: mutex_unlock(&root->fs_info->volume_mutex); - mnt_drop_write_file(file); atomic_set(&root->fs_info->mutually_exclusive_operation_running, 0); + mnt_drop_write_file(file); return ret; } From 25122d15e21cf252e91e4cad7cea760f97df29f1 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Sun, 20 Jan 2013 15:57:57 +0200 Subject: [PATCH 477/553] Btrfs: reorder locks and sanity checks in btrfs_ioctl_defrag Operation-specific check (whether subvol is readonly or not) should go after the mutual exclusiveness check. Signed-off-by: Ilya Dryomov --- fs/btrfs/ioctl.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index f5c1c150d9f3..afbf3ac2079d 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2186,19 +2186,20 @@ static int btrfs_ioctl_defrag(struct file *file, void __user *argp) struct btrfs_ioctl_defrag_range_args *range; int ret; - if (btrfs_root_readonly(root)) - return -EROFS; + ret = mnt_want_write_file(file); + if (ret) + return ret; if (atomic_xchg(&root->fs_info->mutually_exclusive_operation_running, 1)) { pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); + mnt_drop_write_file(file); return -EINVAL; } - ret = mnt_want_write_file(file); - if (ret) { - atomic_set(&root->fs_info->mutually_exclusive_operation_running, - 0); - return ret; + + if (btrfs_root_readonly(root)) { + ret = -EROFS; + goto out; } switch (inode->i_mode & S_IFMT) { @@ -2250,8 +2251,8 @@ static int btrfs_ioctl_defrag(struct file *file, void __user *argp) ret = -EINVAL; } out: - mnt_drop_write_file(file); atomic_set(&root->fs_info->mutually_exclusive_operation_running, 0); + mnt_drop_write_file(file); return ret; } From edea0d03ee5f0ae0051b6adb6681ebdf976b1ca4 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 20 Jan 2013 20:25:47 +0100 Subject: [PATCH 478/553] ia64: kill thread_matches(), unexport ptrace_check_attach() The ia64 function "thread_matches()" has no users since commit e868a55c2a8c ("[IA64] remove find_thread_for_addr()"). Remove it. This allows us to make ptrace_check_attach() static to kernel/ptrace.c, which is good since we'll need to change the semantics of it and fix up all the callers. Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds --- arch/ia64/kernel/ptrace.c | 27 --------------------------- include/linux/ptrace.h | 1 - kernel/ptrace.c | 2 +- 3 files changed, 1 insertion(+), 29 deletions(-) diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 4265ff64219b..b7a5fffe0924 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -672,33 +672,6 @@ ptrace_attach_sync_user_rbs (struct task_struct *child) read_unlock(&tasklist_lock); } -static inline int -thread_matches (struct task_struct *thread, unsigned long addr) -{ - unsigned long thread_rbs_end; - struct pt_regs *thread_regs; - - if (ptrace_check_attach(thread, 0) < 0) - /* - * If the thread is not in an attachable state, we'll - * ignore it. The net effect is that if ADDR happens - * to overlap with the portion of the thread's - * register backing store that is currently residing - * on the thread's kernel stack, then ptrace() may end - * up accessing a stale value. But if the thread - * isn't stopped, that's a problem anyhow, so we're - * doing as well as we can... - */ - return 0; - - thread_regs = task_pt_regs(thread); - thread_rbs_end = ia64_get_user_rbs_end(thread, thread_regs, NULL); - if (!on_kernel_rbs(addr, thread_regs->ar_bspstore, thread_rbs_end)) - return 0; - - return 1; /* looks like we've got a winner */ -} - /* * Write f32-f127 back to task->thread.fph if it has been modified. */ diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h index 1693775ecfe8..89573a33ab3c 100644 --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -45,7 +45,6 @@ extern long arch_ptrace(struct task_struct *child, long request, extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len); extern int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long dst, int len); extern void ptrace_disable(struct task_struct *); -extern int ptrace_check_attach(struct task_struct *task, bool ignore_state); extern int ptrace_request(struct task_struct *child, long request, unsigned long addr, unsigned long data); extern void ptrace_notify(int exit_code); diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 1599157336a6..612a56126851 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -139,7 +139,7 @@ void __ptrace_unlink(struct task_struct *child) * RETURNS: * 0 on success, -ESRCH if %child is not ready. */ -int ptrace_check_attach(struct task_struct *child, bool ignore_state) +static int ptrace_check_attach(struct task_struct *child, bool ignore_state) { int ret = -ESRCH; From 630541863b29f88c7ab34e647758344e4cd1eafd Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 16 Jan 2013 14:25:44 +1000 Subject: [PATCH 479/553] ttm: don't destroy old mm_node on memcpy failure When we are using memcpy to move objects around, and we fail to memcpy due to lack of memory to populate or failure to finish the copy, we don't want to destroy the mm_node that has been copied into old_copy. While working on a new kms driver that uses memcpy, if I overallocated bo's up to the memory limits, and eviction failed, then machine would oops soon after due to having an active bo with an already freed drm_mm embedded in it, freeing it a second time didn't end well. Reviewed-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo_util.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c index d73d6e3e17b2..44420fca7dfa 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_util.c +++ b/drivers/gpu/drm/ttm/ttm_bo_util.c @@ -344,8 +344,12 @@ int ttm_bo_move_memcpy(struct ttm_buffer_object *bo, if (ttm->state == tt_unpopulated) { ret = ttm->bdev->driver->ttm_tt_populate(ttm); - if (ret) + if (ret) { + /* if we fail here don't nuke the mm node + * as the bo still owns it */ + old_copy.mm_node = NULL; goto out1; + } } add = 0; @@ -371,8 +375,11 @@ int ttm_bo_move_memcpy(struct ttm_buffer_object *bo, prot); } else ret = ttm_copy_io_page(new_iomap, old_iomap, page); - if (ret) + if (ret) { + /* failing here, means keep old copy as-is */ + old_copy.mm_node = NULL; goto out1; + } } mb(); out2: From 014b34409fb2015f63663b6cafdf557fdf289628 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 16 Jan 2013 15:58:34 +1000 Subject: [PATCH 480/553] ttm: on move memory failure don't leave a node dangling if we have a move notify callback, when moving fails, we call move notify the opposite way around, however this ends up with *mem containing the mm_node from the bo, which means we double free it. This is a follow on to the previous fix. Reviewed-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 33d20be87db5..52b20b12c83a 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -434,6 +434,7 @@ static int ttm_bo_handle_move_mem(struct ttm_buffer_object *bo, bo->mem = tmp_mem; bdev->driver->move_notify(bo, mem); bo->mem = *mem; + *mem = tmp_mem; } goto out_err; From ee61abb3223e28a1a14a8429c0319755d20d3e40 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 20 Jan 2013 20:22:58 -0800 Subject: [PATCH 481/553] module: fix missing module_mutex unlock Commit 1fb9341ac348 ("module: put modules in list much earlier") moved some of the module initialization code around, and in the process changed the exit paths too. But for the duplicate export symbol error case the change made the ddebug_cleanup path jump to after the module mutex unlock, even though it happens with the mutex held. Rusty has some patches to split this function up into some helper functions, hopefully the mess of complex goto targets will go away eventually. Reported-by: Dan Carpenter Cc: Rusty Russell Signed-off-by: Linus Torvalds --- kernel/module.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/module.c b/kernel/module.c index d25e359279ae..eab08274ec9b 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -3274,8 +3274,8 @@ again: /* module_bug_cleanup needs module_mutex protection */ mutex_lock(&module_mutex); module_bug_cleanup(mod); - mutex_unlock(&module_mutex); ddebug_cleanup: + mutex_unlock(&module_mutex); dynamic_debug_remove(info->debug); synchronize_sched(); kfree(mod->args); From e3e2775cedc9d6294b7bc7cbe9f59c62f9472871 Mon Sep 17 00:00:00 2001 From: Nickolai Zeldovich Date: Wed, 16 Jan 2013 21:36:17 -0500 Subject: [PATCH 482/553] cifs: fix srcip_matches() for ipv6 srcip_matches() previously had code like this: srcip_matches(..., struct sockaddr *rhs) { /* ... */ struct sockaddr_in6 *vaddr6 = (struct sockaddr_in6 *) &rhs; return ipv6_addr_equal(..., &vaddr6->sin6_addr); } which interpreted the values on the stack after the 'rhs' pointer as an ipv6 address. The correct thing to do is to use 'rhs', not '&rhs'. Signed-off-by: Nickolai Zeldovich Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 17c3643e5950..12b3da39733b 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1917,7 +1917,7 @@ srcip_matches(struct sockaddr *srcaddr, struct sockaddr *rhs) } case AF_INET6: { struct sockaddr_in6 *saddr6 = (struct sockaddr_in6 *)srcaddr; - struct sockaddr_in6 *vaddr6 = (struct sockaddr_in6 *)&rhs; + struct sockaddr_in6 *vaddr6 = (struct sockaddr_in6 *)rhs; return ipv6_addr_equal(&saddr6->sin6_addr, &vaddr6->sin6_addr); } default: From a67adb997419fb53540d4a4f79c6471c60bc69b6 Mon Sep 17 00:00:00 2001 From: Dmitry Kasatkin Date: Fri, 18 Jan 2013 23:56:39 +0200 Subject: [PATCH 483/553] evm: checking if removexattr is not a NULL The following lines of code produce a kernel oops. fd = socket(PF_FILE, SOCK_STREAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0); fchmod(fd, 0666); [ 139.922364] BUG: unable to handle kernel NULL pointer dereference at (null) [ 139.924982] IP: [< (null)>] (null) [ 139.924982] *pde = 00000000 [ 139.924982] Oops: 0000 [#5] SMP [ 139.924982] Modules linked in: fuse dm_crypt dm_mod i2c_piix4 serio_raw evdev binfmt_misc button [ 139.924982] Pid: 3070, comm: acpid Tainted: G D 3.8.0-rc2-kds+ #465 Bochs Bochs [ 139.924982] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0 [ 139.924982] EIP is at 0x0 [ 139.924982] EAX: cf5ef000 EBX: cf5ef000 ECX: c143d600 EDX: c15225f2 [ 139.924982] ESI: cf4d2a1c EDI: cf4d2a1c EBP: cc02df10 ESP: cc02dee4 [ 139.924982] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 139.924982] CR0: 80050033 CR2: 00000000 CR3: 0c059000 CR4: 000006d0 [ 139.924982] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 139.924982] DR6: ffff0ff0 DR7: 00000400 [ 139.924982] Process acpid (pid: 3070, ti=cc02c000 task=d7705340 task.ti=cc02c000) [ 139.924982] Stack: [ 139.924982] c1203c88 00000000 cc02def4 cf4d2a1c ae21eefa 471b60d5 1083c1ba c26a5940 [ 139.924982] e891fb5e 00000041 00000004 cc02df1c c1203964 00000000 cc02df4c c10e20c3 [ 139.924982] 00000002 00000000 00000000 22222222 c1ff2222 cf5ef000 00000000 d76efb08 [ 139.924982] Call Trace: [ 139.924982] [] ? evm_update_evmxattr+0x5b/0x62 [ 139.924982] [] evm_inode_post_setattr+0x22/0x26 [ 139.924982] [] notify_change+0x25f/0x281 [ 139.924982] [] chmod_common+0x59/0x76 [ 139.924982] [] ? put_unused_fd+0x33/0x33 [ 139.924982] [] sys_fchmod+0x39/0x5c [ 139.924982] [] syscall_call+0x7/0xb [ 139.924982] Code: Bad EIP value. This happens because sockets do not define the removexattr operation. Before removing the xattr, verify the removexattr function pointer is not NULL. Signed-off-by: Dmitry Kasatkin Signed-off-by: Mimi Zohar Cc: stable@vger.kernel.org Signed-off-by: James Morris --- security/integrity/evm/evm_crypto.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/security/integrity/evm/evm_crypto.c b/security/integrity/evm/evm_crypto.c index dfb26918699c..7dd538ef5b83 100644 --- a/security/integrity/evm/evm_crypto.c +++ b/security/integrity/evm/evm_crypto.c @@ -205,9 +205,9 @@ int evm_update_evmxattr(struct dentry *dentry, const char *xattr_name, rc = __vfs_setxattr_noperm(dentry, XATTR_NAME_EVM, &xattr_data, sizeof(xattr_data), 0); - } - else if (rc == -ENODATA) + } else if (rc == -ENODATA && inode->i_op->removexattr) { rc = inode->i_op->removexattr(dentry, XATTR_NAME_EVM); + } return rc; } From 103a197c0c4ec936f5a243b5b092e4e49213f569 Mon Sep 17 00:00:00 2001 From: Jerry Snitselaar Date: Thu, 17 Jan 2013 01:04:14 -0700 Subject: [PATCH 484/553] security/device_cgroup: lock assert fails in dev_exception_clean() devcgroup_css_free() calls dev_exception_clean() without the devcgroup_mutex being locked. Shutting down a kvm virt was giving me the following trace: [36280.732764] ------------[ cut here ]------------ [36280.732778] WARNING: at /home/snits/dev/linux/security/device_cgroup.c:172 dev_exception_clean+0xa9/0xc0() [36280.732782] Hardware name: Studio XPS 8100 [36280.732785] Modules linked in: xt_REDIRECT fuse ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_CHECKSUM iptable_mangle bridge stp llc nf_conntrack_ipv4 ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_defrag_ipv4 ip6table_filter it87 hwmon_vid xt_state nf_conntrack ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq coretemp snd_seq_device crc32c_intel snd_pcm snd_page_alloc snd_timer snd broadcom tg3 serio_raw i7core_edac edac_core ptp pps_core lpc_ich pcspkr mfd_core soundcore microcode i2c_i801 nfsd auth_rpcgss nfs_acl lockd vhost_net sunrpc tun macvtap macvlan kvm_intel kvm uinput binfmt_misc autofs4 usb_storage firewire_ohci firewire_core crc_itu_t radeon drm_kms_helper ttm [36280.732921] Pid: 933, comm: libvirtd Tainted: G W 3.8.0-rc3-00307-g4c217de #1 [36280.732922] Call Trace: [36280.732927] [] warn_slowpath_common+0x93/0xc0 [36280.732930] [] warn_slowpath_null+0x1a/0x20 [36280.732932] [] dev_exception_clean+0xa9/0xc0 [36280.732934] [] devcgroup_css_free+0x1a/0x30 [36280.732938] [] cgroup_diput+0x76/0x210 [36280.732941] [] d_delete+0x120/0x180 [36280.732943] [] vfs_rmdir+0xef/0x130 [36280.732945] [] do_rmdir+0x107/0x1c0 [36280.732949] [] ? trace_hardirqs_on_thunk+0x3a/0x3f [36280.732951] [] sys_rmdir+0x16/0x20 [36280.732954] [] system_call_fastpath+0x16/0x1b [36280.732956] ---[ end trace ca39dced899a7d9f ]--- Signed-off-by: Jerry Snitselaar Cc: stable@kernel.org Signed-off-by: James Morris --- security/device_cgroup.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/security/device_cgroup.c b/security/device_cgroup.c index 19ecc8de9e6b..d794abcc4b3b 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -215,7 +215,9 @@ static void devcgroup_css_free(struct cgroup *cgroup) struct dev_cgroup *dev_cgroup; dev_cgroup = cgroup_to_devcgroup(cgroup); + mutex_lock(&devcgroup_mutex); dev_exception_clean(dev_cgroup); + mutex_unlock(&devcgroup_mutex); kfree(dev_cgroup); } From 85de7fac3990cf0c0736edc83856add2e648c76a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 21 Nov 2012 06:19:06 +0100 Subject: [PATCH 485/553] i2c: mxs: Fix misuse init_completion The init_completion() call does reinit not only the variable carrying the flag that the completion finished, but also initialized the waitqueue associated with the completion. On the contrary, the INIT_COMPLETION() call only reinits the flag. In case there was anything still stuck in the waitqueue, subsequent call to init_completion() would be able to create possible race condition. This patch uses the proper function and moves init_completion() into .probe() call of the driver, to be issued only once. Note that such scenario is impossible, since two threads can never enter the mxs_i2c_xfer_msg(), since whole this section is protected by mutex in I2C core. This by no means allows this issue to exit though. Signed-off-by: Marek Vasut Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 1b1a936eccc9..977c4d596b69 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -316,7 +316,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, if (msg->len == 0) return -EINVAL; - init_completion(&i2c->cmd_complete); + INIT_COMPLETION(i2c->cmd_complete); i2c->cmd_err = 0; ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); @@ -473,6 +473,8 @@ static int mxs_i2c_probe(struct platform_device *pdev) i2c->dev = dev; i2c->speed = &mxs_i2c_95kHz_config; + init_completion(&i2c->cmd_complete); + if (dev->of_node) { err = mxs_i2c_get_ofdata(i2c); if (err) From 42c364ace52ae6b4699105b39f2559c256b6cd4c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 21 Jan 2013 16:53:37 +0100 Subject: [PATCH 486/553] ALSA: hda - Add Conexant CX20755/20756/20757 codec IDs These are just compatible with other CX2075x codecs. Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index dd798c3196ff..009b77a693cf 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -4636,6 +4636,12 @@ static const struct hda_codec_preset snd_hda_preset_conexant[] = { .patch = patch_conexant_auto }, { .id = 0x14f15111, .name = "CX20753/4", .patch = patch_conexant_auto }, + { .id = 0x14f15113, .name = "CX20755", + .patch = patch_conexant_auto }, + { .id = 0x14f15114, .name = "CX20756", + .patch = patch_conexant_auto }, + { .id = 0x14f15115, .name = "CX20757", + .patch = patch_conexant_auto }, {} /* terminator */ }; @@ -4659,6 +4665,9 @@ MODULE_ALIAS("snd-hda-codec-id:14f150b9"); MODULE_ALIAS("snd-hda-codec-id:14f1510f"); MODULE_ALIAS("snd-hda-codec-id:14f15110"); MODULE_ALIAS("snd-hda-codec-id:14f15111"); +MODULE_ALIAS("snd-hda-codec-id:14f15113"); +MODULE_ALIAS("snd-hda-codec-id:14f15114"); +MODULE_ALIAS("snd-hda-codec-id:14f15115"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Conexant HD-audio codec"); From c1bf08ac26e92122faab9f6c32ea8aba94612dae Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 14 Dec 2012 09:48:15 -0500 Subject: [PATCH 487/553] ftrace: Be first to run code modification on modules If some other kernel subsystem has a module notifier, and adds a kprobe to a ftrace mcount point (now that kprobes work on ftrace points), when the ftrace notifier runs it will fail and disable ftrace, as well as kprobes that are attached to ftrace points. Here's the error: WARNING: at kernel/trace/ftrace.c:1618 ftrace_bug+0x239/0x280() Hardware name: Bochs Modules linked in: fat(+) stap_56d28a51b3fe546293ca0700b10bcb29__8059(F) nfsv4 auth_rpcgss nfs dns_resolver fscache xt_nat iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack lockd sunrpc ppdev parport_pc parport microcode virtio_net i2c_piix4 drm_kms_helper ttm drm i2c_core [last unloaded: bid_shared] Pid: 8068, comm: modprobe Tainted: GF 3.7.0-0.rc8.git0.1.fc19.x86_64 #1 Call Trace: [] warn_slowpath_common+0x7f/0xc0 [] ? __probe_kernel_read+0x46/0x70 [] ? 0xffffffffa017ffff [] ? 0xffffffffa017ffff [] warn_slowpath_null+0x1a/0x20 [] ftrace_bug+0x239/0x280 [] ftrace_process_locs+0x376/0x520 [] ftrace_module_notify+0x47/0x50 [] notifier_call_chain+0x4d/0x70 [] __blocking_notifier_call_chain+0x58/0x80 [] blocking_notifier_call_chain+0x16/0x20 [] sys_init_module+0x73/0x220 [] system_call_fastpath+0x16/0x1b ---[ end trace 9ef46351e53bbf80 ]--- ftrace failed to modify [] init_once+0x0/0x20 [fat] actual: cc:bb:d2:4b:e1 A kprobe was added to the init_once() function in the fat module on load. But this happened before ftrace could have touched the code. As ftrace didn't run yet, the kprobe system had no idea it was a ftrace point and simply added a breakpoint to the code (0xcc in the cc:bb:d2:4b:e1). Then when ftrace went to modify the location from a call to mcount/fentry into a nop, it didn't see a call op, but instead it saw the breakpoint op and not knowing what to do with it, ftrace shut itself down. The solution is to simply give the ftrace module notifier the max priority. This should have been done regardless, as the core code ftrace modification also happens very early on in boot up. This makes the module modification closer to core modification. Link: http://lkml.kernel.org/r/20130107140333.593683061@goodmis.org Cc: stable@vger.kernel.org Acked-by: Masami Hiramatsu Reported-by: Frank Ch. Eigler Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 3ffe4c5ad3f3..41473b4ad7a4 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -3998,7 +3998,7 @@ static int ftrace_module_notify(struct notifier_block *self, struct notifier_block ftrace_module_nb = { .notifier_call = ftrace_module_notify, - .priority = 0, + .priority = INT_MAX, /* Run before anything that can use kprobes */ }; extern unsigned long __start_mcount_loc[]; From 81f3ae0671dcd70b5d076d899d299c9cf33f3345 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Sun, 20 Jan 2013 09:37:23 -0600 Subject: [PATCH 488/553] ARM: OMAP2+: fix build break for omapdrm Fixes compile break with 3.8-rc4. Signed-off-by: Rob Clark Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/drm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c index 4c7566c7e24a..2a2cfa88ddbf 100644 --- a/arch/arm/mach-omap2/drm.c +++ b/arch/arm/mach-omap2/drm.c @@ -25,6 +25,7 @@ #include #include +#include "soc.h" #include "omap_device.h" #include "omap_hwmod.h" @@ -56,7 +57,7 @@ static int __init omap_init_drm(void) oh->name); } - platform_data.omaprev = GET_OMAP_REVISION(); + platform_data.omaprev = GET_OMAP_TYPE; return platform_device_register(&omap_drm_device); From e407ee099a1d3d80b63123491c81ca7de9d77ad9 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 21 Jan 2013 10:17:03 -0800 Subject: [PATCH 489/553] ARM: OMAP2+: Fix section warning for omap_init_ocp2scp() Otherwise we will get: WARNING: vmlinux.o(.text+0x1d4f0): Section mismatch in reference from the function omap_init_ocp2scp() to the function .init.text:omap_device_build() The function omap_init_ocp2scp() references the function __init omap_device_build(). This is often because omap_init_ocp2scp lacks a __init annotation or the annotation of omap_device_build is wrong. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 5e304d0719a2..626f3ea3142f 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev) return cnt; } -static void omap_init_ocp2scp(void) +static void __init omap_init_ocp2scp(void) { struct omap_hwmod *oh; struct platform_device *pdev; From 034bf091b7a5f02e63409b0b5b6dad1101d70144 Mon Sep 17 00:00:00 2001 From: Pantelis Antoniou Date: Tue, 8 Jan 2013 15:31:42 +0200 Subject: [PATCH 490/553] ARM: OMAP2+: DT node Timer iteration fix The iterator correctly handles of_node_put() calls. Remove it before continue'ing the loop. Without this patch you get the following with CONFIG_OF_DYNAMIC set: ERROR: Bad of_node_put() on /ocp/timer@44e31000! [] (unwind_backtrace+0x0/0xe0) from [] (of_node_release+0x2c/0xa0)! [] (of_node_release+0x2c/0xa0) from [] (of_find_matching_node_and_match+0x78/0x90)! [] (of_find_matching_node_and_match+0x78/0x90) from [] (omap_get_timer_dt+0x78/0x90)! [] (omap_get_timer_dt+0x78/0x90) from [] (omap_dm_timer_init_one.clone.2+0x34/0x2bc)! [] (omap_dm_timer_init_one.clone.2+0x34/0x2bc) from [] (omap2_gptimer_clocksource_init.clone.4+0x24/0xa8)! [] (omap2_gptimer_clocksource_init.clone.4+0x24/0xa8) from [] (time_init+0x20/0x30)! [] (time_init+0x20/0x30) from [] (start_kernel+0x1a8/0x2fc)! Signed-off-by: Pantelis Antoniou Acked-by: Jon Hunter [tony@atomide.com: updated description per Jon] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 691aa674665a..b8ad6e632bb8 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -165,15 +165,11 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, struct device_node *np; for_each_matching_node(np, match) { - if (!of_device_is_available(np)) { - of_node_put(np); + if (!of_device_is_available(np)) continue; - } - if (property && !of_get_property(np, property, NULL)) { - of_node_put(np); + if (property && !of_get_property(np, property, NULL)) continue; - } of_add_property(np, &device_disabled); return np; From 7662a9c60fee25d7234da4be6d8eab2b2ac88448 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Mon, 21 Jan 2013 13:14:12 +0200 Subject: [PATCH 491/553] ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport Add the UART2 muxing data to the board file (this used to be, erroneously, done in the bootloader). Cc: stable [3.7] Signed-off-by: Luciano Coelho Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap4panda.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 5c8e9cee2c2e..769c1feee1c4 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP_PULL_ENA), OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + /* UART2 - BT/FM/GPS shared transport */ + OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; From ff24858c65d9c518af41aad22fb964685351051a Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Thu, 17 Jan 2013 01:22:08 -0700 Subject: [PATCH 492/553] Btrfs: ignore orphan qgroup relations If a qgroup that has still assignments is deleted by the user, the corresponding relations are left in the tree. This leads to an unmountable filesystem. With this patch, those relations are simple ignored. Reported-by: Eric Hopper Signed-off-by: Arne Jansen Signed-off-by: Chris Mason --- fs/btrfs/qgroup.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index fe9d02c45f8e..28f2b39f6a25 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -379,6 +379,13 @@ next1: ret = add_relation_rb(fs_info, found_key.objectid, found_key.offset); + if (ret == -ENOENT) { + printk(KERN_WARNING + "btrfs: orphan qgroup relation 0x%llx->0x%llx\n", + (unsigned long long)found_key.objectid, + (unsigned long long)found_key.offset); + ret = 0; /* ignore the error */ + } if (ret) goto out; next2: From 2cf687039676c2b6e1ee96b0b89090aca94babcd Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Thu, 17 Jan 2013 01:22:09 -0700 Subject: [PATCH 493/553] Btrfs: prevent qgroup destroy when there are still relations Currently you can just destroy a qgroup even though it is in use by other qgroups or has qgroups assigned to it. This patch prevents destruction of qgroups unless they are completely unused. Otherwise destroy will return EBUSY. Reported-by: Eric Hopper Signed-off-by: Arne Jansen Signed-off-by: Chris Mason --- fs/btrfs/qgroup.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 28f2b39f6a25..a5c856234323 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -963,17 +963,28 @@ int btrfs_remove_qgroup(struct btrfs_trans_handle *trans, struct btrfs_fs_info *fs_info, u64 qgroupid) { struct btrfs_root *quota_root; + struct btrfs_qgroup *qgroup; int ret = 0; quota_root = fs_info->quota_root; if (!quota_root) return -EINVAL; + /* check if there are no relations to this qgroup */ + spin_lock(&fs_info->qgroup_lock); + qgroup = find_qgroup_rb(fs_info, qgroupid); + if (qgroup) { + if (!list_empty(&qgroup->groups) || !list_empty(&qgroup->members)) { + spin_unlock(&fs_info->qgroup_lock); + return -EBUSY; + } + } + spin_unlock(&fs_info->qgroup_lock); + ret = del_qgroup_item(trans, quota_root, qgroupid); spin_lock(&fs_info->qgroup_lock); del_qgroup_rb(quota_root->fs_info, qgroupid); - spin_unlock(&fs_info->qgroup_lock); return ret; From a105bb88f46b60de2adf1ee98745bd59362b09ab Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 21 Jan 2013 15:15:56 +0200 Subject: [PATCH 494/553] Btrfs: fix a regression in balance usage filter Commit 3fed40cc ("Btrfs: cleanup duplicated division functions"), which was merged into 3.8-rc1, has introduced a regression by removing logic that was guarding us against bad user input. Bring it back. Signed-off-by: Ilya Dryomov Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 9c84dbe64f18..469609838913 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2614,7 +2614,14 @@ static int chunk_usage_filter(struct btrfs_fs_info *fs_info, u64 chunk_offset, cache = btrfs_lookup_block_group(fs_info, chunk_offset); chunk_used = btrfs_block_group_used(&cache->item); - user_thresh = div_factor_fine(cache->key.offset, bargs->usage); + if (bargs->usage == 0) + user_thresh = 0; + else if (bargs->usage > 100) + user_thresh = cache->key.offset; + else + user_thresh = div_factor_fine(cache->key.offset, + bargs->usage); + if (chunk_used < user_thresh) ret = 0; From 6e6093a8f144414d904575da5fdea40cf14fb63e Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Thu, 17 Jan 2013 00:08:30 +0900 Subject: [PATCH 495/553] f2fs: add __init to functions in init_f2fs_fs Add __init to functions in init_f2fs_fs for code consistency. Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim --- fs/f2fs/checkpoint.c | 2 +- fs/f2fs/f2fs.h | 10 +++++----- fs/f2fs/gc.c | 2 +- fs/f2fs/node.c | 2 +- fs/f2fs/super.c | 2 +- 5 files changed, 9 insertions(+), 9 deletions(-) diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c index d75c86a17893..ff3c8439af87 100644 --- a/fs/f2fs/checkpoint.c +++ b/fs/f2fs/checkpoint.c @@ -771,7 +771,7 @@ void init_orphan_info(struct f2fs_sb_info *sbi) sbi->n_orphans = 0; } -int create_checkpoint_caches(void) +int __init create_checkpoint_caches(void) { orphan_entry_slab = f2fs_kmem_cache_create("f2fs_orphan_entry", sizeof(struct orphan_inode_entry), NULL); diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 976325d51e3d..c8e2d751ef9c 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -914,7 +914,7 @@ int restore_node_summary(struct f2fs_sb_info *, unsigned int, void flush_nat_entries(struct f2fs_sb_info *); int build_node_manager(struct f2fs_sb_info *); void destroy_node_manager(struct f2fs_sb_info *); -int create_node_manager_caches(void); +int __init create_node_manager_caches(void); void destroy_node_manager_caches(void); /* @@ -966,7 +966,7 @@ void sync_dirty_dir_inodes(struct f2fs_sb_info *); void block_operations(struct f2fs_sb_info *); void write_checkpoint(struct f2fs_sb_info *, bool, bool); void init_orphan_info(struct f2fs_sb_info *); -int create_checkpoint_caches(void); +int __init create_checkpoint_caches(void); void destroy_checkpoint_caches(void); /* @@ -988,7 +988,7 @@ void stop_gc_thread(struct f2fs_sb_info *); block_t start_bidx_of_node(unsigned int); int f2fs_gc(struct f2fs_sb_info *); void build_gc_manager(struct f2fs_sb_info *); -int create_gc_caches(void); +int __init create_gc_caches(void); void destroy_gc_caches(void); /* @@ -1060,7 +1060,7 @@ struct f2fs_stat_info { int f2fs_build_stats(struct f2fs_sb_info *); void f2fs_destroy_stats(struct f2fs_sb_info *); -void f2fs_create_root_stats(void); +void __init f2fs_create_root_stats(void); void f2fs_destroy_root_stats(void); #else #define stat_inc_call_count(si) @@ -1071,7 +1071,7 @@ void f2fs_destroy_root_stats(void); static inline int f2fs_build_stats(struct f2fs_sb_info *sbi) { return 0; } static inline void f2fs_destroy_stats(struct f2fs_sb_info *sbi) { } -static inline void f2fs_create_root_stats(void) { } +static inline void __init f2fs_create_root_stats(void) { } static inline void f2fs_destroy_root_stats(void) { } #endif diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c index b4dd90cf1f18..809cfec6683c 100644 --- a/fs/f2fs/gc.c +++ b/fs/f2fs/gc.c @@ -697,7 +697,7 @@ void build_gc_manager(struct f2fs_sb_info *sbi) DIRTY_I(sbi)->v_ops = &default_v_ops; } -int create_gc_caches(void) +int __init create_gc_caches(void) { winode_slab = f2fs_kmem_cache_create("f2fs_gc_inodes", sizeof(struct inode_entry), NULL); diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c index 5066bfd256c9..f177c018745c 100644 --- a/fs/f2fs/node.c +++ b/fs/f2fs/node.c @@ -1732,7 +1732,7 @@ void destroy_node_manager(struct f2fs_sb_info *sbi) kfree(nm_i); } -int create_node_manager_caches(void) +int __init create_node_manager_caches(void) { nat_entry_slab = f2fs_kmem_cache_create("nat_entry", sizeof(struct nat_entry), NULL); diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index d551a724b736..37fad04c8669 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -640,7 +640,7 @@ static struct file_system_type f2fs_fs_type = { .fs_flags = FS_REQUIRES_DEV, }; -static int init_inodecache(void) +static int __init init_inodecache(void) { f2fs_inode_cachep = f2fs_kmem_cache_create("f2fs_inode_cache", sizeof(struct f2fs_inode_info), NULL); From 692bb55d1ab5b278181ff2e65f09eb0be6d50669 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Thu, 17 Jan 2013 18:37:41 +0900 Subject: [PATCH 496/553] f2fs: add remap_pages as generic_file_remap_pages This was added for all the file systems before. See the following commit. commit id: 0b173bc4daa8f8ec03a85abf5e47b23502ff80af [PATCH] mm: kill vma flag VM_CAN_NONLINEAR This patch moves actual ptes filling for non-linear file mappings into special vma operation: ->remap_pages(). File system must implement this method to get non-linear mappings support, if it uses filemap_fault() then generic_file_remap_pages() can be used. Now device drivers can implement this method and obtain nonlinear vma support." Signed-off-by: Jaegeuk Kim --- fs/f2fs/file.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index 819de7f39f26..3191b52aafb0 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -96,8 +96,9 @@ out: } static const struct vm_operations_struct f2fs_file_vm_ops = { - .fault = filemap_fault, - .page_mkwrite = f2fs_vm_page_mkwrite, + .fault = filemap_fault, + .page_mkwrite = f2fs_vm_page_mkwrite, + .remap_pages = generic_file_remap_pages, }; static int need_to_sync_dir(struct f2fs_sb_info *sbi, struct inode *inode) From c01e54b770e69c65525295eb2668be3dc0822406 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Thu, 17 Jan 2013 20:30:23 +0900 Subject: [PATCH 497/553] f2fs: support swapfile This patch adds f2fs_bmap operation to the data address space. This enables f2fs to support swapfile. Signed-off-by: Jaegeuk Kim --- fs/f2fs/data.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index b1347fc6d688..7bd22a201125 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -698,6 +698,11 @@ static int f2fs_set_data_page_dirty(struct page *page) return 0; } +static sector_t f2fs_bmap(struct address_space *mapping, sector_t block) +{ + return generic_block_bmap(mapping, block, get_data_block_ro); +} + const struct address_space_operations f2fs_dblock_aops = { .readpage = f2fs_read_data_page, .readpages = f2fs_read_data_pages, @@ -709,4 +714,5 @@ const struct address_space_operations f2fs_dblock_aops = { .invalidatepage = f2fs_invalidate_data_page, .releasepage = f2fs_release_data_page, .direct_IO = f2fs_direct_IO, + .bmap = f2fs_bmap, }; From a7fdffbd3ea4b3cc2993af006bde38a423b38b72 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Fri, 18 Jan 2013 14:54:13 +0900 Subject: [PATCH 498/553] f2fs: avoid issuing small bios due to several dirty node pages If some small bios of dirty node pages are supposed to be issued during the sequential data writes, there-in well-produced consecutive data bios are able to be split by the small node bios, resulting in performance degradation. So, let's collect a number of dirty node pages until reaching a threshold. And, by default, I set the threshold as 2MB, a segment size. This improves sequential write performance on i5, 512GB SSD (830 w/ SATA2) as follows. Before: 231 MB/s -> After: 255 MB/s Signed-off-by: Jaegeuk Kim Reviewed-by: Namjae Jeon --- fs/f2fs/node.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c index f177c018745c..9bda63c9c166 100644 --- a/fs/f2fs/node.c +++ b/fs/f2fs/node.c @@ -1124,6 +1124,12 @@ static int f2fs_write_node_page(struct page *page, return 0; } +/* + * It is very important to gather dirty pages and write at once, so that we can + * submit a big bio without interfering other data writes. + * Be default, 512 pages (2MB), a segment size, is quite reasonable. + */ +#define COLLECT_DIRTY_NODES 512 static int f2fs_write_node_pages(struct address_space *mapping, struct writeback_control *wbc) { @@ -1131,17 +1137,16 @@ static int f2fs_write_node_pages(struct address_space *mapping, struct block_device *bdev = sbi->sb->s_bdev; long nr_to_write = wbc->nr_to_write; - if (wbc->for_kupdate) - return 0; - - if (get_pages(sbi, F2FS_DIRTY_NODES) == 0) - return 0; - + /* First check balancing cached NAT entries */ if (try_to_free_nats(sbi, NAT_ENTRY_PER_BLOCK)) { write_checkpoint(sbi, false, false); return 0; } + /* collect a number of dirty node pages and write together */ + if (get_pages(sbi, F2FS_DIRTY_NODES) < COLLECT_DIRTY_NODES) + return 0; + /* if mounting is failed, skip writing node pages */ wbc->nr_to_write = bio_get_nr_vecs(bdev); sync_node_pages(sbi, 0, wbc); From 9af45ef5ab8ce4a13c553200dc15509441fbd68f Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Mon, 21 Jan 2013 17:34:21 +0900 Subject: [PATCH 499/553] f2fs: add comments of start_bidx_of_node The caller of start_bidx_of_node() should give proper node offsets which point only direct node blocks. Otherwise, it is a caller's bug. This patch adds comments to make it clear. Reported-by: Dan Carpenter Signed-off-by: Jaegeuk Kim --- fs/f2fs/gc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c index 809cfec6683c..c386910dacc5 100644 --- a/fs/f2fs/gc.c +++ b/fs/f2fs/gc.c @@ -424,7 +424,11 @@ next_step: } /* - * Calculate start block index that this node page contains + * Calculate start block index indicating the given node offset. + * Be careful, caller should give this node offset only indicating direct node + * blocks. If any node offsets, which point the other types of node blocks such + * as indirect or double indirect node blocks, are given, it must be a caller's + * bug. */ block_t start_bidx_of_node(unsigned int node_ofs) { From d8b79b2f94600262fcfbffbe3df7fd3c83c6c51b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 20 Jan 2013 18:02:58 +0300 Subject: [PATCH 500/553] f2fs: use _safe() version of list_for_each This is calling list_del() inside a loop which is a problem when we try move to the next item on the list. I've converted it to use the _safe version. And also, as a cleanup, I've converted it to use list_for_each_entry instead of list_for_each. Signed-off-by: Dan Carpenter Reviewed-by: Dmitry Torokhov Signed-off-by: Jaegeuk Kim --- fs/f2fs/recovery.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c index 6cc046d36815..f42e4060b399 100644 --- a/fs/f2fs/recovery.c +++ b/fs/f2fs/recovery.c @@ -173,10 +173,9 @@ out: static void destroy_fsync_dnodes(struct f2fs_sb_info *sbi, struct list_head *head) { - struct list_head *this; - struct fsync_inode_entry *entry; - list_for_each(this, head) { - entry = list_entry(this, struct fsync_inode_entry, list); + struct fsync_inode_entry *entry, *tmp; + + list_for_each_entry_safe(entry, tmp, head, list) { iput(entry->inode); list_del(&entry->list); kmem_cache_free(fsync_entry_slab, entry); From 31b35e9edd51cab96d880248206c90b7177e3e5c Mon Sep 17 00:00:00 2001 From: Nestor Ovroy Date: Fri, 18 Jan 2013 16:51:03 +0100 Subject: [PATCH 501/553] regmap: fix small typo in regmap_bulk_write comment Signed-off-by: Nestor Ovroy Signed-off-by: Mark Brown --- drivers/base/regmap/regmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 42d5cb0f503f..f00b059c057a 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -1106,7 +1106,7 @@ EXPORT_SYMBOL_GPL(regmap_raw_write); * @val_count: Number of registers to write * * This function is intended to be used for writing a large block of - * data to be device either in single transfer or multiple transfer. + * data to the device either in single transfer or multiple transfer. * * A value of zero will be returned on success, a negative errno will * be returned in error cases. From 0f40cbc4f85e13b1a42ae2f41231645a14965872 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 7 Jan 2013 22:32:06 -0200 Subject: [PATCH 502/553] i2c: mxs: Fix type of error code cmd_err is used to handle error code, so it should not be unsigned. This fixes the following warning when building with W=1 option: drivers/i2c/busses/i2c-mxs.c: In function 'mxs_i2c_xfer_msg': drivers/i2c/busses/i2c-mxs.c:331:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-mxs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 977c4d596b69..d6abaf2cf2e3 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -127,7 +127,7 @@ struct mxs_i2c_dev { struct device *dev; void __iomem *regs; struct completion cmd_complete; - u32 cmd_err; + int cmd_err; struct i2c_adapter adapter; const struct mxs_i2c_speed_config *speed; From bfd059da9503e0091541285cb0481f66b95c0296 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Wed, 26 Dec 2012 10:30:16 +0800 Subject: [PATCH 503/553] i2c: sirf: register i2c_client from dt child-nodes in probe entry in probe() entry of i2c_driver, set the of node of adapter and call of_i2c_register_devices to register all i2c_client from dt child-nodes Signed-off-by: Barry Song Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-sirf.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c index 3f1818b87974..e03381aee34f 100644 --- a/drivers/i2c/busses/i2c-sirf.c +++ b/drivers/i2c/busses/i2c-sirf.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -328,6 +329,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) adap->algo = &i2c_sirfsoc_algo; adap->algo_data = siic; + adap->dev.of_node = pdev->dev.of_node; adap->dev.parent = &pdev->dev; adap->nr = pdev->id; @@ -371,6 +373,8 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) clk_disable(clk); + of_i2c_register_devices(adap); + dev_info(&pdev->dev, " I2C adapter ready to operate\n"); return 0; From 43a2bd42d077de6ad40b00a2abfc4677e24d239c Mon Sep 17 00:00:00 2001 From: Laurent Navet Date: Tue, 8 Jan 2013 14:40:09 +0100 Subject: [PATCH 504/553] i2c: muxes: fix wrong use of sizeof(ptr) sizeof when applied to a pointer typed expression gives the size of the pointer The semantic patch that makes this output is available in scripts/coccinelle/misc/noderef.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Laurent Navet Acked-by: Jean Delvare Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-pinctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c index 1e44d04d1b22..a43c0ce5e3d8 100644 --- a/drivers/i2c/muxes/i2c-mux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c @@ -167,7 +167,7 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev) } mux->busses = devm_kzalloc(&pdev->dev, - sizeof(mux->busses) * mux->pdata->bus_count, + sizeof(*mux->busses) * mux->pdata->bus_count, GFP_KERNEL); if (!mux->busses) { dev_err(&pdev->dev, "Cannot allocate busses\n"); From f44d188acdca1a34e4439ca6a173f85086e0e655 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 18 Jan 2013 19:52:32 +0000 Subject: [PATCH 505/553] cpufreq: OMAP: use RCU locks around usage of OPP OPP pointer is RCU protected, hence after finding it, de-reference also should be protected with the same RCU context else the OPP pointer may become invalid. Reported-by: Alexander Holler Tested-by: Alexander Holler Acked-by: Alexander Holler Signed-off-by: Nishanth Menon Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/omap-cpufreq.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 1f3417a8322d..97102b05843f 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -110,13 +110,16 @@ static int omap_target(struct cpufreq_policy *policy, freq = ret; if (mpu_reg) { + rcu_read_lock(); opp = opp_find_freq_ceil(mpu_dev, &freq); if (IS_ERR(opp)) { + rcu_read_unlock(); dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n", __func__, freqs.new); return -EINVAL; } volt = opp_get_voltage(opp); + rcu_read_unlock(); tol = volt * OPP_TOLERANCE / 100; volt_old = regulator_get_voltage(mpu_reg); } From 78e8eb8feab7d85f4cc215afe1457a228bf4eed9 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 18 Jan 2013 19:52:33 +0000 Subject: [PATCH 506/553] cpufreq: cpufreq-cpu0: use RCU locks around usage of OPP OPP pointer is RCU protected, hence after finding it, de-reference also should be protected with the same RCU context else the OPP pointer may become invalid. Reported-by: Jack Mitchell Tested-by: Alexander Holler Tested-by: Jack Mitchell Acked-by: Alexander Holler Signed-off-by: Nishanth Menon Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq-cpu0.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index 52bf36d599f5..debc5a7c8db6 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -71,12 +71,15 @@ static int cpu0_set_target(struct cpufreq_policy *policy, } if (cpu_reg) { + rcu_read_lock(); opp = opp_find_freq_ceil(cpu_dev, &freq_Hz); if (IS_ERR(opp)) { + rcu_read_unlock(); pr_err("failed to find OPP for %ld\n", freq_Hz); return PTR_ERR(opp); } volt = opp_get_voltage(opp); + rcu_read_unlock(); tol = volt * voltage_tolerance / 100; volt_old = regulator_get_voltage(cpu_reg); } @@ -236,12 +239,14 @@ static int cpu0_cpufreq_driver_init(void) */ for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) ; + rcu_read_lock(); opp = opp_find_freq_exact(cpu_dev, freq_table[0].frequency * 1000, true); min_uV = opp_get_voltage(opp); opp = opp_find_freq_exact(cpu_dev, freq_table[i-1].frequency * 1000, true); max_uV = opp_get_voltage(opp); + rcu_read_unlock(); ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV); if (ret > 0) transition_latency += ret * 1000; From bcb27549f4185ca7d0168e201931613706ef2b83 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 18 Jan 2013 19:52:34 +0000 Subject: [PATCH 507/553] PM / devfreq: add locking documentation for recommended_opp OPP pointers are protected by RCU locks, the pointer validity is permissible only under the section of rcu_read_lock to rcu_read_unlock Add documentation to the effect. Signed-off-by: Nishanth Menon Signed-off-by: Rafael J. Wysocki --- drivers/devfreq/devfreq.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 53766f39aadd..3b367973a802 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -994,6 +994,11 @@ module_exit(devfreq_exit); * @freq: The frequency given to target function * @flags: Flags handed from devfreq framework. * + * Locking: This function must be called under rcu_read_lock(). opp is a rcu + * protected pointer. The reason for the same is that the opp pointer which is + * returned will remain valid for use with opp_get_{voltage, freq} only while + * under the locked area. The pointer returned must be used prior to unlocking + * with rcu_read_unlock() to maintain the integrity of the pointer. */ struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, u32 flags) From 8fa938acb318378463987b04be083dc2467e0480 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 18 Jan 2013 19:52:35 +0000 Subject: [PATCH 508/553] PM / devfreq: exynos4_bus: honor RCU lock usage OPP pointers cannot be expected to be valid beyond the boundary of rcu_read_lock and rcu_read_unlock. Unfortunately, the current exynos4 busfreq driver does not honor the usage constraint and stores the OPP pointer in struct busfreq_data. This could potentially become invalid later such as: across devfreq opp change decisions, resulting in unpredictable behavior. To fix this, we introduce a busfreq specific busfreq_opp_info structure which is used to handle OPP information. OPP information is de-referenced to voltage and frequency pairs as needed into busfreq_opp_info structure and used as needed. Signed-off-by: Nishanth Menon Signed-off-by: Rafael J. Wysocki --- drivers/devfreq/exynos4_bus.c | 94 +++++++++++++++++++++++++---------- 1 file changed, 67 insertions(+), 27 deletions(-) diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c index 80c745e83082..46d94e9e95b5 100644 --- a/drivers/devfreq/exynos4_bus.c +++ b/drivers/devfreq/exynos4_bus.c @@ -73,6 +73,16 @@ enum busclk_level_idx { #define EX4210_LV_NUM (LV_2 + 1) #define EX4x12_LV_NUM (LV_4 + 1) +/** + * struct busfreq_opp_info - opp information for bus + * @rate: Frequency in hertz + * @volt: Voltage in microvolts corresponding to this OPP + */ +struct busfreq_opp_info { + unsigned long rate; + unsigned long volt; +}; + struct busfreq_data { enum exynos4_busf_type type; struct device *dev; @@ -80,7 +90,7 @@ struct busfreq_data { bool disabled; struct regulator *vdd_int; struct regulator *vdd_mif; /* Exynos4412/4212 only */ - struct opp *curr_opp; + struct busfreq_opp_info curr_oppinfo; struct exynos4_ppmu dmc[2]; struct notifier_block pm_notifier; @@ -296,13 +306,14 @@ static unsigned int exynos4x12_clkdiv_sclkip[][3] = { }; -static int exynos4210_set_busclk(struct busfreq_data *data, struct opp *opp) +static int exynos4210_set_busclk(struct busfreq_data *data, + struct busfreq_opp_info *oppi) { unsigned int index; unsigned int tmp; for (index = LV_0; index < EX4210_LV_NUM; index++) - if (opp_get_freq(opp) == exynos4210_busclk_table[index].clk) + if (oppi->rate == exynos4210_busclk_table[index].clk) break; if (index == EX4210_LV_NUM) @@ -361,13 +372,14 @@ static int exynos4210_set_busclk(struct busfreq_data *data, struct opp *opp) return 0; } -static int exynos4x12_set_busclk(struct busfreq_data *data, struct opp *opp) +static int exynos4x12_set_busclk(struct busfreq_data *data, + struct busfreq_opp_info *oppi) { unsigned int index; unsigned int tmp; for (index = LV_0; index < EX4x12_LV_NUM; index++) - if (opp_get_freq(opp) == exynos4x12_mifclk_table[index].clk) + if (oppi->rate == exynos4x12_mifclk_table[index].clk) break; if (index == EX4x12_LV_NUM) @@ -576,11 +588,12 @@ static int exynos4x12_get_intspec(unsigned long mifclk) return -EINVAL; } -static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp, - struct opp *oldopp) +static int exynos4_bus_setvolt(struct busfreq_data *data, + struct busfreq_opp_info *oppi, + struct busfreq_opp_info *oldoppi) { int err = 0, tmp; - unsigned long volt = opp_get_voltage(opp); + unsigned long volt = oppi->volt; switch (data->type) { case TYPE_BUSF_EXYNOS4210: @@ -595,11 +608,11 @@ static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp, if (err) break; - tmp = exynos4x12_get_intspec(opp_get_freq(opp)); + tmp = exynos4x12_get_intspec(oppi->rate); if (tmp < 0) { err = tmp; regulator_set_voltage(data->vdd_mif, - opp_get_voltage(oldopp), + oldoppi->volt, MAX_SAFEVOLT); break; } @@ -609,7 +622,7 @@ static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp, /* Try to recover */ if (err) regulator_set_voltage(data->vdd_mif, - opp_get_voltage(oldopp), + oldoppi->volt, MAX_SAFEVOLT); break; default: @@ -626,17 +639,26 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, struct platform_device *pdev = container_of(dev, struct platform_device, dev); struct busfreq_data *data = platform_get_drvdata(pdev); - struct opp *opp = devfreq_recommended_opp(dev, _freq, flags); - unsigned long freq = opp_get_freq(opp); - unsigned long old_freq = opp_get_freq(data->curr_opp); + struct opp *opp; + unsigned long freq; + unsigned long old_freq = data->curr_oppinfo.rate; + struct busfreq_opp_info new_oppinfo; - if (IS_ERR(opp)) + rcu_read_lock(); + opp = devfreq_recommended_opp(dev, _freq, flags); + if (IS_ERR(opp)) { + rcu_read_unlock(); return PTR_ERR(opp); + } + new_oppinfo.rate = opp_get_freq(opp); + new_oppinfo.volt = opp_get_voltage(opp); + rcu_read_unlock(); + freq = new_oppinfo.rate; if (old_freq == freq) return 0; - dev_dbg(dev, "targetting %lukHz %luuV\n", freq, opp_get_voltage(opp)); + dev_dbg(dev, "targetting %lukHz %luuV\n", freq, new_oppinfo.volt); mutex_lock(&data->lock); @@ -644,17 +666,18 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, goto out; if (old_freq < freq) - err = exynos4_bus_setvolt(data, opp, data->curr_opp); + err = exynos4_bus_setvolt(data, &new_oppinfo, + &data->curr_oppinfo); if (err) goto out; if (old_freq != freq) { switch (data->type) { case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, opp); + err = exynos4210_set_busclk(data, &new_oppinfo); break; case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, opp); + err = exynos4x12_set_busclk(data, &new_oppinfo); break; default: err = -EINVAL; @@ -664,11 +687,12 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, goto out; if (old_freq > freq) - err = exynos4_bus_setvolt(data, opp, data->curr_opp); + err = exynos4_bus_setvolt(data, &new_oppinfo, + &data->curr_oppinfo); if (err) goto out; - data->curr_opp = opp; + data->curr_oppinfo = new_oppinfo; out: mutex_unlock(&data->lock); return err; @@ -702,7 +726,7 @@ static int exynos4_bus_get_dev_status(struct device *dev, exynos4_read_ppmu(data); busier_dmc = exynos4_get_busier_dmc(data); - stat->current_frequency = opp_get_freq(data->curr_opp); + stat->current_frequency = data->curr_oppinfo.rate; if (busier_dmc) addr = S5P_VA_DMC1; @@ -933,6 +957,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, struct busfreq_data *data = container_of(this, struct busfreq_data, pm_notifier); struct opp *opp; + struct busfreq_opp_info new_oppinfo; unsigned long maxfreq = ULONG_MAX; int err = 0; @@ -943,18 +968,29 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, data->disabled = true; + rcu_read_lock(); opp = opp_find_freq_floor(data->dev, &maxfreq); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(data->dev, "%s: unable to find a min freq\n", + __func__); + return PTR_ERR(opp); + } + new_oppinfo.rate = opp_get_freq(opp); + new_oppinfo.volt = opp_get_voltage(opp); + rcu_read_unlock(); - err = exynos4_bus_setvolt(data, opp, data->curr_opp); + err = exynos4_bus_setvolt(data, &new_oppinfo, + &data->curr_oppinfo); if (err) goto unlock; switch (data->type) { case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, opp); + err = exynos4210_set_busclk(data, &new_oppinfo); break; case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, opp); + err = exynos4x12_set_busclk(data, &new_oppinfo); break; default: err = -EINVAL; @@ -962,7 +998,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, if (err) goto unlock; - data->curr_opp = opp; + data->curr_oppinfo = new_oppinfo; unlock: mutex_unlock(&data->lock); if (err) @@ -1027,13 +1063,17 @@ static int exynos4_busfreq_probe(struct platform_device *pdev) } } + rcu_read_lock(); opp = opp_find_freq_floor(dev, &exynos4_devfreq_profile.initial_freq); if (IS_ERR(opp)) { + rcu_read_unlock(); dev_err(dev, "Invalid initial frequency %lu kHz.\n", exynos4_devfreq_profile.initial_freq); return PTR_ERR(opp); } - data->curr_opp = opp; + data->curr_oppinfo.rate = opp_get_freq(opp); + data->curr_oppinfo.volt = opp_get_voltage(opp); + rcu_read_unlock(); platform_set_drvdata(pdev, data); From 9855d8ce41a7801548a05d844db2f46c3e810166 Mon Sep 17 00:00:00 2001 From: Stefan Bader Date: Tue, 22 Jan 2013 13:37:21 +0100 Subject: [PATCH 509/553] ACPI: Check MSR valid bit before using P-state frequencies To fix incorrect P-state frequencies which can happen on some AMD systems f594065faf4f9067c2283a34619fc0714e79a98d "ACPI: Add fixups for AMD P-state figures" introduced a quirk to obtain the correct values by reading from AMD specific MSRs. This did cause a regression when running a kernel using that quirk under Xen which does (currently) not pass through MSR reads to the HW. Instead the guest gets a 0 in return. And this seems to cause a failure to initialize the ondemand governour (hard to say for sure as all P-states appear to run at the same frequency). While this should also be fixed in the hypervisor (to allow a guest to read that MSR), this patch is intended to work around the issue in the meantime. In discussion it turned out that indeed real HW/BIOSes may choose to not set the valid bit and thus mark the P-state as invalid. So this could be considered a fix for broken BIOSes that also works around the issue on Xen. Signed-off-by: Stefan Bader Cc: 3.7+ Acked-by: Borislav Petkov Signed-off-by: Rafael J. Wysocki --- drivers/acpi/processor_perflib.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 836bfe069042..53e7ac9403a7 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -340,6 +340,13 @@ static void amd_fixup_frequency(struct acpi_processor_px *px, int i) if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10) || boot_cpu_data.x86 == 0x11) { rdmsr(MSR_AMD_PSTATE_DEF_BASE + index, lo, hi); + /* + * MSR C001_0064+: + * Bit 63: PstateEn. Read-write. If set, the P-state is valid. + */ + if (!(hi & BIT(31))) + return; + fid = lo & 0x3f; did = (lo >> 6) & 7; if (boot_cpu_data.x86 == 0x10) From 2c5de558cd228e6d9ae633fb318f18942c7248f1 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Sun, 20 Jan 2013 02:32:58 +0200 Subject: [PATCH 510/553] i2c: omap: errata i462: fix incorrect ack for arbitration lost interrupt The errata handling function acks wrong interrupt in case of "Arbitration lost". Fix it. Discovered during code review, the real impact of the bug is unknown. Signed-off-by: Aaro Koskinen Reviewed-by: Felipe Balbi Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 20d41bfa7c19..832f16e19f44 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -803,7 +803,7 @@ static int errata_omap3_i462(struct omap_i2c_dev *dev) if (stat & OMAP_I2C_STAT_AL) { dev_err(dev->dev, "Arbitration lost\n"); dev->cmd_err |= OMAP_I2C_STAT_AL; - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK); + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_AL); } return -EIO; From 9eb13cf3ecf67a0ff3114d6b66878a1149f96b7d Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Sun, 20 Jan 2013 20:37:02 +0200 Subject: [PATCH 511/553] i2c: omap: fix draining irq handling Commit 0bdfe0cb803dce699ff337c35d8e97ac355fa417 (i2c: omap: sanitize exit path) changed the interrupt handler to exit early and complete the transfer after the draining IRQ is handled. As a result, the ARDY may not be cleared properly, and it may cause all future I2C transfers to timeout with "timeout waiting for bus ready". This is reproducible at least with N900 when twl4030_gpio makes a long write (> FIFO size) during the probe (http://marc.info/?l=linux-omap&m=135818882610432&w=2). The fix is to continue until we get ARDY interrupt that completes the transfer. Tested with 3.8-rc4 + N900: 20 boots in a row without errors; without the patch the problem triggers after few reboots. Signed-off-by: Aaro Koskinen Acked-by: Felipe Balbi Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 832f16e19f44..4cc2f0528c88 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -963,7 +963,7 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) i2c_omap_errata_i207(dev, stat); omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR); - break; + continue; } if (stat & OMAP_I2C_STAT_RRDY) { @@ -989,7 +989,7 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) break; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XDR); - break; + continue; } if (stat & OMAP_I2C_STAT_XRDY) { From 9dd3162deb67e9d2dc08af8bedea61c41fae85a8 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 17 Jan 2013 12:31:04 +0200 Subject: [PATCH 512/553] i2c-designware: add missing MODULE_LICENSE The driver can also be built as a module so add MODULE_LICENSE for it. In addition add MODULE_DESCRIPTION as well. Signed-off-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index cbba7db9ad59..f5258c205de5 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -34,6 +34,7 @@ #include #include #include +#include #include "i2c-designware-core.h" /* @@ -725,3 +726,6 @@ u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev) return dw_readl(dev, DW_IC_COMP_PARAM_1); } EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param); + +MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core"); +MODULE_LICENSE("GPL"); From 910ffdb18a6408e14febbb6e4b6840fd2c928c82 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 21 Jan 2013 20:47:41 +0100 Subject: [PATCH 513/553] ptrace: introduce signal_wake_up_state() and ptrace_signal_wake_up() Cleanup and preparation for the next change. signal_wake_up(resume => true) is overused. None of ptrace/jctl callers actually want to wakeup a TASK_WAKEKILL task, but they can't specify the necessary mask. Turn signal_wake_up() into signal_wake_up_state(state), reintroduce signal_wake_up() as a trivial helper, and add ptrace_signal_wake_up() which adds __TASK_TRACED. This way ptrace_signal_wake_up() can work "inside" ptrace_request() even if the tracee doesn't have the TASK_WAKEKILL bit set. Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds --- include/linux/sched.h | 11 ++++++++++- kernel/ptrace.c | 8 ++++---- kernel/signal.c | 14 ++++---------- 3 files changed, 18 insertions(+), 15 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 6fc8f45de4e9..d2112477ff5e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2714,7 +2714,16 @@ static inline void thread_group_cputime_init(struct signal_struct *sig) extern void recalc_sigpending_and_wake(struct task_struct *t); extern void recalc_sigpending(void); -extern void signal_wake_up(struct task_struct *t, int resume_stopped); +extern void signal_wake_up_state(struct task_struct *t, unsigned int state); + +static inline void signal_wake_up(struct task_struct *t, bool resume) +{ + signal_wake_up_state(t, resume ? TASK_WAKEKILL : 0); +} +static inline void ptrace_signal_wake_up(struct task_struct *t, bool resume) +{ + signal_wake_up_state(t, resume ? __TASK_TRACED : 0); +} /* * Wrappers for p->thread_info->cpu access. No-op on UP. diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 612a56126851..62f7c2774b16 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -117,7 +117,7 @@ void __ptrace_unlink(struct task_struct *child) * TASK_KILLABLE sleeps. */ if (child->jobctl & JOBCTL_STOP_PENDING || task_is_traced(child)) - signal_wake_up(child, task_is_traced(child)); + ptrace_signal_wake_up(child, true); spin_unlock(&child->sighand->siglock); } @@ -317,7 +317,7 @@ static int ptrace_attach(struct task_struct *task, long request, */ if (task_is_stopped(task) && task_set_jobctl_pending(task, JOBCTL_TRAP_STOP | JOBCTL_TRAPPING)) - signal_wake_up(task, 1); + signal_wake_up_state(task, __TASK_STOPPED); spin_unlock(&task->sighand->siglock); @@ -737,7 +737,7 @@ int ptrace_request(struct task_struct *child, long request, * tracee into STOP. */ if (likely(task_set_jobctl_pending(child, JOBCTL_TRAP_STOP))) - signal_wake_up(child, child->jobctl & JOBCTL_LISTENING); + ptrace_signal_wake_up(child, child->jobctl & JOBCTL_LISTENING); unlock_task_sighand(child, &flags); ret = 0; @@ -763,7 +763,7 @@ int ptrace_request(struct task_struct *child, long request, * start of this trap and now. Trigger re-trap. */ if (child->jobctl & JOBCTL_TRAP_NOTIFY) - signal_wake_up(child, true); + ptrace_signal_wake_up(child, true); ret = 0; } unlock_task_sighand(child, &flags); diff --git a/kernel/signal.c b/kernel/signal.c index 53cd5c4d1172..6e97aa6fa32c 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -680,23 +680,17 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info) * No need to set need_resched since signal event passing * goes through ->blocked */ -void signal_wake_up(struct task_struct *t, int resume) +void signal_wake_up_state(struct task_struct *t, unsigned int state) { - unsigned int mask; - set_tsk_thread_flag(t, TIF_SIGPENDING); - /* - * For SIGKILL, we want to wake it up in the stopped/traced/killable + * TASK_WAKEKILL also means wake it up in the stopped/traced/killable * case. We don't check t->state here because there is a race with it * executing another processor and just now entering stopped state. * By using wake_up_state, we ensure the process will wake up and * handle its death signal. */ - mask = TASK_INTERRUPTIBLE; - if (resume) - mask |= TASK_WAKEKILL; - if (!wake_up_state(t, mask)) + if (!wake_up_state(t, state | TASK_INTERRUPTIBLE)) kick_process(t); } @@ -844,7 +838,7 @@ static void ptrace_trap_notify(struct task_struct *t) assert_spin_locked(&t->sighand->siglock); task_set_jobctl_pending(t, JOBCTL_TRAP_NOTIFY); - signal_wake_up(t, t->jobctl & JOBCTL_LISTENING); + ptrace_signal_wake_up(t, t->jobctl & JOBCTL_LISTENING); } /* From 0f815a0a700bc10547449bde6c106051a035a1b9 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 22 Jan 2013 11:37:35 -0500 Subject: [PATCH 514/553] USB: UHCI: fix IRQ race during initialization This patch (as1644) fixes a race that occurs during startup in uhci-hcd. If the IRQ line is shared with other devices, it's possible for the handler routine to be called before the data structures are fully initialized. The problem is fixed by adding a check to the IRQ handler routine. If the initialization hasn't finished yet, the routine will return immediately. Signed-off-by: Alan Stern Reported-by: Don Zickus Tested-by: "Huang, Adrian (ISS Linux TW)" Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-hcd.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 4b9e9aba2665..4f64d24eebc8 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -447,6 +447,10 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) return IRQ_NONE; uhci_writew(uhci, status, USBSTS); /* Clear it */ + spin_lock(&uhci->lock); + if (unlikely(!uhci->is_initialized)) /* not yet configured */ + goto done; + if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) { if (status & USBSTS_HSE) dev_err(uhci_dev(uhci), "host system error, " @@ -455,7 +459,6 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) dev_err(uhci_dev(uhci), "host controller process " "error, something bad happened!\n"); if (status & USBSTS_HCH) { - spin_lock(&uhci->lock); if (uhci->rh_state >= UHCI_RH_RUNNING) { dev_err(uhci_dev(uhci), "host controller halted, " @@ -473,15 +476,15 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) * pending unlinks */ mod_timer(&hcd->rh_timer, jiffies); } - spin_unlock(&uhci->lock); } } - if (status & USBSTS_RD) + if (status & USBSTS_RD) { + spin_unlock(&uhci->lock); usb_hcd_poll_rh_status(hcd); - else { - spin_lock(&uhci->lock); + } else { uhci_scan_schedule(uhci); + done: spin_unlock(&uhci->lock); } @@ -662,9 +665,9 @@ static int uhci_start(struct usb_hcd *hcd) */ mb(); + spin_lock_irq(&uhci->lock); configure_hc(uhci); uhci->is_initialized = 1; - spin_lock_irq(&uhci->lock); start_rh(uhci); spin_unlock_irq(&uhci->lock); return 0; From 9ec6e9d3cb5192b11074f8adcedc10a6d410528a Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 22 Jan 2013 11:59:58 -0500 Subject: [PATCH 515/553] USB: EHCI: Move definition of EHCI_STATS to ehci.h Without this, platform drivers e.g. ehci-omap.c will see a different version of struct ehci_hcd than ehci-hcd.c and break reference to 'debug_dir' and 'priv' members when CONFIG_USB_DEBUG is enabled. Signed-off-by: Roger Quadros Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 4 ---- drivers/usb/host/ehci.h | 4 ++++ 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index c97503bb0b0e..104d6348377e 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -74,10 +74,6 @@ static const char hcd_name [] = "ehci_hcd"; #undef VERBOSE_DEBUG #undef EHCI_URB_TRACE -#ifdef DEBUG -#define EHCI_STATS -#endif - /* magic numbers that can affect system performance */ #define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */ #define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */ diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 9dadc7118d68..88f0142aea0c 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -38,6 +38,10 @@ typedef __u16 __bitwise __hc16; #endif /* statistics can be kept for tuning/monitoring */ +#ifdef DEBUG +#define EHCI_STATS +#endif + struct ehci_stats { /* irq usage */ unsigned long normal; From 9ce45ef86c4c861841ba68b24341dbd9d6834c98 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 22 Jan 2013 12:00:12 -0500 Subject: [PATCH 516/553] USB: EHCI: fix incorrect configuration test This patch (as1641) fixes a minor bug in ehci-hcd left over from when the Chipidea driver was converted to the "ehci-hcd is a library" scheme. The test for whether the Chipidea platform driver is active should be IS_ENABLED(), not defined(). Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 104d6348377e..d09ff8f294fe 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1348,7 +1348,7 @@ MODULE_LICENSE ("GPL"); #if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \ !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \ - !defined(CONFIG_USB_CHIPIDEA_HOST) && \ + !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \ !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ !defined(OF_PLATFORM_DRIVER) && \ From 9debc1793b36124b9304255d2e8b5b6d8b491793 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 22 Jan 2013 12:00:26 -0500 Subject: [PATCH 517/553] USB: EHCI: add a name for the platform-private field This patch (as1642) adds an ehci->priv field for private use by EHCI platform drivers. The space was provided some time ago, but it didn't have a name. Until now none of the platform drivers has used this private space, but that's about to change in the next patch of this series. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 88f0142aea0c..36c3a8210595 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -225,6 +225,9 @@ struct ehci_hcd { /* one per controller */ #ifdef DEBUG struct dentry *debug_dir; #endif + + /* platform-specific data -- must come last */ + unsigned long priv[0] __aligned(sizeof(s64)); }; /* convert between an HCD pointer and the corresponding EHCI_HCD */ From 9cf2b72b25f3f6a5a1a46a4f36037e66de52465c Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 22 Jan 2013 15:34:40 +0000 Subject: [PATCH 518/553] arm64: elf: fix core dumping to match what glibc expects The kernel's internal definition of ELF_NGREG uses struct pt_regs, which means that we disagree with userspace on the size of coredumps since glibc correctly uses the user-visible struct user_pt_regs. This patch fixes our ELF_NGREG definition to use struct user_pt_regs and introduces our own ELF_CORE_COPY_REGS to convert between the user and kernel structure definitions. Cc: Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/elf.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h index 07fea290d7c1..fe32c0e4ac01 100644 --- a/arch/arm64/include/asm/elf.h +++ b/arch/arm64/include/asm/elf.h @@ -26,7 +26,10 @@ typedef unsigned long elf_greg_t; -#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) +#define ELF_NGREG (sizeof(struct user_pt_regs) / sizeof(elf_greg_t)) +#define ELF_CORE_COPY_REGS(dest, regs) \ + *(struct user_pt_regs *)&(dest) = (regs)->user_regs; + typedef elf_greg_t elf_gregset_t[ELF_NGREG]; typedef struct user_fpsimd_state elf_fpregset_t; From f1b99392caf120d7533da260318fae0eb5053737 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 18 Jan 2013 19:00:47 +0000 Subject: [PATCH 519/553] arm64: makefile: fix uname munging when setting ARCH on native machine By popular demand, arch/aarch64 is now known as arch/arm64. However, uname -m (and indeed the GNU triplet) still use aarch64 as the machine string. This patch fixes native builds of both the kernel and perf tools by updating the relevant Makefiles to munge the output of uname -m and set the ARCH variable appropriately. Cc: Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- Makefile | 2 +- tools/perf/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 253a455d8d8d..2cd4c6be44f2 100644 --- a/Makefile +++ b/Makefile @@ -169,7 +169,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ -e s/arm.*/arm/ -e s/sa110/arm/ \ -e s/s390x/s390/ -e s/parisc64/parisc/ \ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ - -e s/sh[234].*/sh/ ) + -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ ) # Cross compiling and selecting different set of gcc/bin-utils # --------------------------------------------------------------------------- diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 891bc77bdb2c..8ab05e543ef4 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -58,7 +58,7 @@ ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ -e s/arm.*/arm/ -e s/sa110/arm/ \ -e s/s390x/s390/ -e s/parisc64/parisc/ \ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ - -e s/sh[234].*/sh/ ) + -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ ) NO_PERF_REGS := 1 CC = $(CROSS_COMPILE)gcc From 9899d11f654474d2d54ea52ceaa2a1f4db3abd68 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 21 Jan 2013 20:48:00 +0100 Subject: [PATCH 520/553] ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL putreg() assumes that the tracee is not running and pt_regs_access() can safely play with its stack. However a killed tracee can return from ptrace_stop() to the low-level asm code and do RESTORE_REST, this means that debugger can actually read/modify the kernel stack until the tracee does SAVE_REST again. set_task_blockstep() can race with SIGKILL too and in some sense this race is even worse, the very fact the tracee can be woken up breaks the logic. As Linus suggested we can clear TASK_WAKEKILL around the arch_ptrace() call, this ensures that nobody can ever wakeup the tracee while the debugger looks at it. Not only this fixes the mentioned problems, we can do some cleanups/simplifications in arch_ptrace() paths. Probably ptrace_unfreeze_traced() needs more callers, for example it makes sense to make the tracee killable for oom-killer before access_process_vm(). While at it, add the comment into may_ptrace_stop() to explain why ptrace_stop() still can't rely on SIGKILL and signal_pending_state(). Reported-by: Salman Qazi Reported-by: Suleiman Souhlal Suggested-by: Linus Torvalds Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds --- arch/x86/kernel/step.c | 9 +++--- kernel/ptrace.c | 64 +++++++++++++++++++++++++++++++++++------- kernel/signal.c | 5 ++++ 3 files changed, 64 insertions(+), 14 deletions(-) diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c index cd3b2438a980..9b4d51d0c0d0 100644 --- a/arch/x86/kernel/step.c +++ b/arch/x86/kernel/step.c @@ -165,10 +165,11 @@ void set_task_blockstep(struct task_struct *task, bool on) * Ensure irq/preemption can't change debugctl in between. * Note also that both TIF_BLOCKSTEP and debugctl should * be changed atomically wrt preemption. - * FIXME: this means that set/clear TIF_BLOCKSTEP is simply - * wrong if task != current, SIGKILL can wakeup the stopped - * tracee and set/clear can play with the running task, this - * can confuse the next __switch_to_xtra(). + * + * NOTE: this means that set/clear TIF_BLOCKSTEP is only safe if + * task is current or it can't be running, otherwise we can race + * with __switch_to_xtra(). We rely on ptrace_freeze_traced() but + * PTRACE_KILL is not safe. */ local_irq_disable(); debugctl = get_debugctlmsr(); diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 62f7c2774b16..6cbeaae4406d 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -122,6 +122,40 @@ void __ptrace_unlink(struct task_struct *child) spin_unlock(&child->sighand->siglock); } +/* Ensure that nothing can wake it up, even SIGKILL */ +static bool ptrace_freeze_traced(struct task_struct *task) +{ + bool ret = false; + + /* Lockless, nobody but us can set this flag */ + if (task->jobctl & JOBCTL_LISTENING) + return ret; + + spin_lock_irq(&task->sighand->siglock); + if (task_is_traced(task) && !__fatal_signal_pending(task)) { + task->state = __TASK_TRACED; + ret = true; + } + spin_unlock_irq(&task->sighand->siglock); + + return ret; +} + +static void ptrace_unfreeze_traced(struct task_struct *task) +{ + if (task->state != __TASK_TRACED) + return; + + WARN_ON(!task->ptrace || task->parent != current); + + spin_lock_irq(&task->sighand->siglock); + if (__fatal_signal_pending(task)) + wake_up_state(task, __TASK_TRACED); + else + task->state = TASK_TRACED; + spin_unlock_irq(&task->sighand->siglock); +} + /** * ptrace_check_attach - check whether ptracee is ready for ptrace operation * @child: ptracee to check for @@ -151,24 +185,29 @@ static int ptrace_check_attach(struct task_struct *child, bool ignore_state) * be changed by us so it's not changing right after this. */ read_lock(&tasklist_lock); - if ((child->ptrace & PT_PTRACED) && child->parent == current) { + if (child->ptrace && child->parent == current) { + WARN_ON(child->state == __TASK_TRACED); /* * child->sighand can't be NULL, release_task() * does ptrace_unlink() before __exit_signal(). */ - spin_lock_irq(&child->sighand->siglock); - WARN_ON_ONCE(task_is_stopped(child)); - if (ignore_state || (task_is_traced(child) && - !(child->jobctl & JOBCTL_LISTENING))) + if (ignore_state || ptrace_freeze_traced(child)) ret = 0; - spin_unlock_irq(&child->sighand->siglock); } read_unlock(&tasklist_lock); - if (!ret && !ignore_state) - ret = wait_task_inactive(child, TASK_TRACED) ? 0 : -ESRCH; + if (!ret && !ignore_state) { + if (!wait_task_inactive(child, __TASK_TRACED)) { + /* + * This can only happen if may_ptrace_stop() fails and + * ptrace_stop() changes ->state back to TASK_RUNNING, + * so we should not worry about leaking __TASK_TRACED. + */ + WARN_ON(child->state == __TASK_TRACED); + ret = -ESRCH; + } + } - /* All systems go.. */ return ret; } @@ -900,6 +939,8 @@ SYSCALL_DEFINE4(ptrace, long, request, long, pid, unsigned long, addr, goto out_put_task_struct; ret = arch_ptrace(child, request, addr, data); + if (ret || request != PTRACE_DETACH) + ptrace_unfreeze_traced(child); out_put_task_struct: put_task_struct(child); @@ -1039,8 +1080,11 @@ asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid, ret = ptrace_check_attach(child, request == PTRACE_KILL || request == PTRACE_INTERRUPT); - if (!ret) + if (!ret) { ret = compat_arch_ptrace(child, request, addr, data); + if (ret || request != PTRACE_DETACH) + ptrace_unfreeze_traced(child); + } out_put_task_struct: put_task_struct(child); diff --git a/kernel/signal.c b/kernel/signal.c index 6e97aa6fa32c..3d09cf6cde75 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -1794,6 +1794,10 @@ static inline int may_ptrace_stop(void) * If SIGKILL was already sent before the caller unlocked * ->siglock we must see ->core_state != NULL. Otherwise it * is safe to enter schedule(). + * + * This is almost outdated, a task with the pending SIGKILL can't + * block in TASK_TRACED. But PTRACE_EVENT_EXIT can be reported + * after SIGKILL was already dequeued. */ if (unlikely(current->mm->core_state) && unlikely(current->mm == current->parent->mm)) @@ -1919,6 +1923,7 @@ static void ptrace_stop(int exit_code, int why, int clear_code, siginfo_t *info) if (gstop_done) do_notify_parent_cldstop(current, false, why); + /* tasklist protects us from ptrace_freeze_traced() */ __set_current_state(TASK_RUNNING); if (clear_code) current->exit_code = 0; From 9067ac85d533651b98c2ff903182a20cbb361fcb Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 21 Jan 2013 20:48:17 +0100 Subject: [PATCH 521/553] wake_up_process() should be never used to wakeup a TASK_STOPPED/TRACED task wake_up_process() should never wakeup a TASK_STOPPED/TRACED task. Change it to use TASK_NORMAL and add the WARN_ON(). TASK_ALL has no other users, probably can be killed. Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds --- kernel/sched/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 257002c13bb0..26058d0bebba 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -1523,7 +1523,8 @@ out: */ int wake_up_process(struct task_struct *p) { - return try_to_wake_up(p, TASK_ALL, 0); + WARN_ON(task_is_stopped_or_traced(p)); + return try_to_wake_up(p, TASK_NORMAL, 0); } EXPORT_SYMBOL(wake_up_process); From efa17194581bdfca0986dabc178908bd7c21ba00 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 22 Jan 2013 22:33:46 +0100 Subject: [PATCH 522/553] cpufreq: Add module aliases for acpi-cpufreq The acpi core will call request_module("acpi-cpufreq") on subsystem init, but this will fail if the module isn't available at that stage of boot. Add some module aliases to ensure that udev can load the module on Intel and AMD systems with the appropriate feature bits - I /think/ that this will also work on VIA systems, but haven't verified that. References: http://lkml.kernel.org/r/1448223.sdUJnNSRz4@vostro.rjw.lan Signed-off-by: Matthew Garrett Tested-by: Leonid Isaev Acked-by: Borislav Petkov Cc: 3.7+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/acpi-cpufreq.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 0d048f6a2b23..7b0d49d78c61 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -1030,4 +1030,11 @@ MODULE_PARM_DESC(acpi_pstate_strict, late_initcall(acpi_cpufreq_init); module_exit(acpi_cpufreq_exit); +static const struct x86_cpu_id acpi_cpufreq_ids[] = { + X86_FEATURE_MATCH(X86_FEATURE_ACPI), + X86_FEATURE_MATCH(X86_FEATURE_HW_PSTATE), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, acpi_cpufreq_ids); + MODULE_ALIAS("acpi"); From f56c3196f251012de9b3ebaff55732a9074fdaae Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 22 Jan 2013 16:15:15 -0800 Subject: [PATCH 523/553] async: fix __lowest_in_progress() Commit 083b804c4d3e ("async: use workqueue for worker pool") made it possible that async jobs are moved from pending to running out-of-order. While pending async jobs will be queued and dispatched for execution in the same order, nothing guarantees they'll enter "1) move self to the running queue" of async_run_entry_fn() in the same order. Before the conversion, async implemented its own worker pool. An async worker, upon being woken up, fetches the first item from the pending list, which kept the executing lists sorted. The conversion to workqueue was done by adding work_struct to each async_entry and async just schedules the work item. The queueing and dispatching of such work items are still in order but now each worker thread is associated with a specific async_entry and moves that specific async_entry to the executing list. So, depending on which worker reaches that point earlier, which is non-deterministic, we may end up moving an async_entry with larger cookie before one with smaller one. This broke __lowest_in_progress(). running->domain may not be properly sorted and is not guaranteed to contain lower cookies than pending list when not empty. Fix it by ensuring sort-inserting to the running list and always looking at both pending and running when trying to determine the lowest cookie. Over time, the async synchronization implementation became quite messy. We better restructure it such that each async_entry is linked to two lists - one global and one per domain - and not move it when execution starts. There's no reason to distinguish pending and running. They behave the same for synchronization purposes. Signed-off-by: Tejun Heo Cc: Arjan van de Ven Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- kernel/async.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) diff --git a/kernel/async.c b/kernel/async.c index a1d585c351d6..6f34904a0b53 100644 --- a/kernel/async.c +++ b/kernel/async.c @@ -86,18 +86,27 @@ static atomic_t entry_count; */ static async_cookie_t __lowest_in_progress(struct async_domain *running) { + async_cookie_t first_running = next_cookie; /* infinity value */ + async_cookie_t first_pending = next_cookie; /* ditto */ struct async_entry *entry; + /* + * Both running and pending lists are sorted but not disjoint. + * Take the first cookies from both and return the min. + */ if (!list_empty(&running->domain)) { entry = list_first_entry(&running->domain, typeof(*entry), list); - return entry->cookie; + first_running = entry->cookie; } - list_for_each_entry(entry, &async_pending, list) - if (entry->running == running) - return entry->cookie; + list_for_each_entry(entry, &async_pending, list) { + if (entry->running == running) { + first_pending = entry->cookie; + break; + } + } - return next_cookie; /* "infinity" value */ + return min(first_running, first_pending); } static async_cookie_t lowest_in_progress(struct async_domain *running) @@ -118,13 +127,17 @@ static void async_run_entry_fn(struct work_struct *work) { struct async_entry *entry = container_of(work, struct async_entry, work); + struct async_entry *pos; unsigned long flags; ktime_t uninitialized_var(calltime), delta, rettime; struct async_domain *running = entry->running; - /* 1) move self to the running queue */ + /* 1) move self to the running queue, make sure it stays sorted */ spin_lock_irqsave(&async_lock, flags); - list_move_tail(&entry->list, &running->domain); + list_for_each_entry_reverse(pos, &running->domain, list) + if (entry->cookie < pos->cookie) + break; + list_move_tail(&entry->list, &pos->list); spin_unlock_irqrestore(&async_lock, flags); /* 2) run (and print duration) */ From d6f620a457aa4c5c2e8d1a079a1236216c445aba Mon Sep 17 00:00:00 2001 From: Cong Ding Date: Tue, 15 Jan 2013 19:44:26 +0100 Subject: [PATCH 524/553] clk: mvebu/clk-cpu.c: fix memory leakage the variable cpuclk and clk_name should be properly freed when error happens. Signed-off-by: Cong Ding Acked-by: Jason Cooper Acked-by: Gregory CLEMENT Acked-by: Mike Turquette Signed-off-by: Jason Cooper --- drivers/clk/mvebu/clk-cpu.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c index ff004578a119..9dd2551a0a41 100644 --- a/drivers/clk/mvebu/clk-cpu.c +++ b/drivers/clk/mvebu/clk-cpu.c @@ -124,7 +124,7 @@ void __init of_cpu_clk_setup(struct device_node *node) clks = kzalloc(ncpus * sizeof(*clks), GFP_KERNEL); if (WARN_ON(!clks)) - return; + goto clks_out; for_each_node_by_type(dn, "cpu") { struct clk_init_data init; @@ -134,11 +134,11 @@ void __init of_cpu_clk_setup(struct device_node *node) int cpu, err; if (WARN_ON(!clk_name)) - return; + goto bail_out; err = of_property_read_u32(dn, "reg", &cpu); if (WARN_ON(err)) - return; + goto bail_out; sprintf(clk_name, "cpu%d", cpu); parent_clk = of_clk_get(node, 0); @@ -167,6 +167,9 @@ void __init of_cpu_clk_setup(struct device_node *node) return; bail_out: kfree(clks); + while(ncpus--) + kfree(cpuclk[ncpus].clk_name); +clks_out: kfree(cpuclk); } From f42abc72da2e77efefd547562a92ddd18926b48b Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 16 Jan 2013 14:13:56 +0100 Subject: [PATCH 525/553] mmc: mvsdio: use devm_ API to simplify/correct error paths. There are a number of bugs in the error paths of this driver. Make use of devm_ functions to simplify the cleanup on error. Based on a patch by Russell King. Signed-off-by: Andrew Lunn Signed-off-by: Jason Cooper --- drivers/mmc/host/mvsdio.c | 92 +++++++++++++-------------------------- 1 file changed, 30 insertions(+), 62 deletions(-) diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index de4c20b3936c..f8dd36102949 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -50,8 +50,6 @@ struct mvsd_host { struct timer_list timer; struct mmc_host *mmc; struct device *dev; - struct resource *res; - int irq; struct clk *clk; int gpio_card_detect; int gpio_write_protect; @@ -718,10 +716,6 @@ static int __init mvsd_probe(struct platform_device *pdev) if (!r || irq < 0 || !mvsd_data) return -ENXIO; - r = request_mem_region(r->start, SZ_1K, DRIVER_NAME); - if (!r) - return -EBUSY; - mmc = mmc_alloc_host(sizeof(struct mvsd_host), &pdev->dev); if (!mmc) { ret = -ENOMEM; @@ -731,8 +725,8 @@ static int __init mvsd_probe(struct platform_device *pdev) host = mmc_priv(mmc); host->mmc = mmc; host->dev = &pdev->dev; - host->res = r; host->base_clock = mvsd_data->clock / 2; + host->clk = ERR_PTR(-EINVAL); mmc->ops = &mvsd_ops; @@ -752,7 +746,7 @@ static int __init mvsd_probe(struct platform_device *pdev) spin_lock_init(&host->lock); - host->base = ioremap(r->start, SZ_4K); + host->base = devm_request_and_ioremap(&pdev->dev, r); if (!host->base) { ret = -ENOMEM; goto out; @@ -765,44 +759,45 @@ static int __init mvsd_probe(struct platform_device *pdev) mvsd_power_down(host); - ret = request_irq(irq, mvsd_irq, 0, DRIVER_NAME, host); + ret = devm_request_irq(&pdev->dev, irq, mvsd_irq, 0, DRIVER_NAME, host); if (ret) { pr_err("%s: cannot assign irq %d\n", DRIVER_NAME, irq); goto out; - } else - host->irq = irq; + } /* Not all platforms can gate the clock, so it is not an error if the clock does not exists. */ - host->clk = clk_get(&pdev->dev, NULL); - if (!IS_ERR(host->clk)) { + host->clk = devm_clk_get(&pdev->dev, NULL); + if (!IS_ERR(host->clk)) clk_prepare_enable(host->clk); - } if (mvsd_data->gpio_card_detect) { - ret = gpio_request(mvsd_data->gpio_card_detect, - DRIVER_NAME " cd"); + ret = devm_gpio_request_one(&pdev->dev, + mvsd_data->gpio_card_detect, + GPIOF_IN, DRIVER_NAME " cd"); if (ret == 0) { - gpio_direction_input(mvsd_data->gpio_card_detect); irq = gpio_to_irq(mvsd_data->gpio_card_detect); - ret = request_irq(irq, mvsd_card_detect_irq, - IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING, - DRIVER_NAME " cd", host); + ret = devm_request_irq(&pdev->dev, irq, + mvsd_card_detect_irq, + IRQ_TYPE_EDGE_RISING | + IRQ_TYPE_EDGE_FALLING, + DRIVER_NAME " cd", host); if (ret == 0) host->gpio_card_detect = mvsd_data->gpio_card_detect; else - gpio_free(mvsd_data->gpio_card_detect); + devm_gpio_free(&pdev->dev, + mvsd_data->gpio_card_detect); } } if (!host->gpio_card_detect) mmc->caps |= MMC_CAP_NEEDS_POLL; if (mvsd_data->gpio_write_protect) { - ret = gpio_request(mvsd_data->gpio_write_protect, - DRIVER_NAME " wp"); + ret = devm_gpio_request_one(&pdev->dev, + mvsd_data->gpio_write_protect, + GPIOF_IN, DRIVER_NAME " wp"); if (ret == 0) { - gpio_direction_input(mvsd_data->gpio_write_protect); host->gpio_write_protect = mvsd_data->gpio_write_protect; } @@ -824,26 +819,11 @@ static int __init mvsd_probe(struct platform_device *pdev) return 0; out: - if (host) { - if (host->irq) - free_irq(host->irq, host); - if (host->gpio_card_detect) { - free_irq(gpio_to_irq(host->gpio_card_detect), host); - gpio_free(host->gpio_card_detect); - } - if (host->gpio_write_protect) - gpio_free(host->gpio_write_protect); - if (host->base) - iounmap(host->base); - } - if (r) - release_resource(r); - if (mmc) - if (!IS_ERR_OR_NULL(host->clk)) { + if (mmc) { + if (!IS_ERR(host->clk)) clk_disable_unprepare(host->clk); - clk_put(host->clk); - } mmc_free_host(mmc); + } return ret; } @@ -852,28 +832,16 @@ static int __exit mvsd_remove(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); - if (mmc) { - struct mvsd_host *host = mmc_priv(mmc); + struct mvsd_host *host = mmc_priv(mmc); - if (host->gpio_card_detect) { - free_irq(gpio_to_irq(host->gpio_card_detect), host); - gpio_free(host->gpio_card_detect); - } - mmc_remove_host(mmc); - free_irq(host->irq, host); - if (host->gpio_write_protect) - gpio_free(host->gpio_write_protect); - del_timer_sync(&host->timer); - mvsd_power_down(host); - iounmap(host->base); - release_resource(host->res); + mmc_remove_host(mmc); + del_timer_sync(&host->timer); + mvsd_power_down(host); + + if (!IS_ERR(host->clk)) + clk_disable_unprepare(host->clk); + mmc_free_host(mmc); - if (!IS_ERR(host->clk)) { - clk_disable_unprepare(host->clk); - clk_put(host->clk); - } - mmc_free_host(mmc); - } platform_set_drvdata(pdev, NULL); return 0; } From 09d75bc7d217bd8868899028a98b53423e6b3324 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Tue, 22 Jan 2013 20:46:33 +0100 Subject: [PATCH 526/553] ARM: kirkwood: fix missing #interrupt-cells property The gpio controller on kirkwood can provide interrupts but is missing the #interrupt-cells property. This patch just adds it to both gpio controllers. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 110d6cbb795b..d6ab442b7011 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -36,6 +36,7 @@ reg = <0x10100 0x40>; ngpios = <32>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <35>, <36>, <37>, <38>; }; @@ -46,6 +47,7 @@ reg = <0x10140 0x40>; ngpios = <18>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <39>, <40>, <41>; }; From a7e2ca17039edb5f782be519eaf9d8ea500ba7cc Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Mon, 21 Jan 2013 13:12:42 +0200 Subject: [PATCH 527/553] Revert "drivers/misc/ti-st: remove gpio handling" This reverts commit eccf2979b2c034b516e01b8a104c3739f7ef07d1. The reason is that it broke TI WiLink shared transport on Panda. Also, callback functions should not be added to board files anymore, so revert to implementing the power functions in the driver itself. Additionally, changed a variable name ('status' to 'err') so that this revert compiles properly. Cc: stable [3.7] Acked-by: Tony Lindgren Signed-off-by: Luciano Coelho Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ti-st/st_kim.c | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 9ff942a346ed..83269f1d16e3 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -468,6 +468,11 @@ long st_kim_start(void *kim_data) if (pdata->chip_enable) pdata->chip_enable(kim_gdata); + /* Configure BT nShutdown to HIGH state */ + gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); + mdelay(5); /* FIXME: a proper toggle */ + gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH); + mdelay(100); /* re-initialize the completion */ INIT_COMPLETION(kim_gdata->ldisc_installed); /* send notification to UIM */ @@ -509,7 +514,8 @@ long st_kim_start(void *kim_data) * (b) upon failure to either install ldisc or download firmware. * The function is responsible to (a) notify UIM about un-installation, * (b) flush UART if the ldisc was installed. - * (c) invoke platform's chip disabling routine. + * (c) reset BT_EN - pull down nshutdown at the end. + * (d) invoke platform's chip disabling routine. */ long st_kim_stop(void *kim_data) { @@ -541,6 +547,13 @@ long st_kim_stop(void *kim_data) err = -ETIMEDOUT; } + /* By default configure BT nShutdown to LOW state */ + gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); + mdelay(1); + gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH); + mdelay(1); + gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); + /* platform specific disable */ if (pdata->chip_disable) pdata->chip_disable(kim_gdata); @@ -733,6 +746,20 @@ static int kim_probe(struct platform_device *pdev) /* refer to itself */ kim_gdata->core_data->kim_data = kim_gdata; + /* Claim the chip enable nShutdown gpio from the system */ + kim_gdata->nshutdown = pdata->nshutdown_gpio; + err = gpio_request(kim_gdata->nshutdown, "kim"); + if (unlikely(err)) { + pr_err(" gpio %ld request failed ", kim_gdata->nshutdown); + return err; + } + + /* Configure nShutdown GPIO as output=0 */ + err = gpio_direction_output(kim_gdata->nshutdown, 0); + if (unlikely(err)) { + pr_err(" unable to configure gpio %ld", kim_gdata->nshutdown); + return err; + } /* get reference of pdev for request_firmware */ kim_gdata->kim_pdev = pdev; @@ -779,10 +806,18 @@ err_core_init: static int kim_remove(struct platform_device *pdev) { + /* free the GPIOs requested */ + struct ti_st_plat_data *pdata = pdev->dev.platform_data; struct kim_data_s *kim_gdata; kim_gdata = dev_get_drvdata(&pdev->dev); + /* Free the Bluetooth/FM/GPIO + * nShutdown gpio from the system + */ + gpio_free(pdata->nshutdown_gpio); + pr_info("nshutdown GPIO Freed"); + debugfs_remove_recursive(kim_debugfs_dir); sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp); pr_info("sysfs entries removed"); From 10b8c7dff5d3633b69e77f57d404dab54ead3787 Mon Sep 17 00:00:00 2001 From: Cong Ding Date: Tue, 22 Jan 2013 19:20:58 -0500 Subject: [PATCH 528/553] fs/cifs/cifs_dfs_ref.c: fix potential memory leakage When it goes to error through line 144, the memory allocated to *devname is not freed, and the caller doesn't free it either in line 250. So we free the memroy of *devname in function cifs_compose_mount_options() when it goes to error. Signed-off-by: Cong Ding CC: stable Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_dfs_ref.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index ce5cbd717bfc..210fce2df308 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -226,6 +226,8 @@ compose_mount_options_out: compose_mount_options_err: kfree(mountdata); mountdata = ERR_PTR(rc); + kfree(*devname); + *devname = NULL; goto compose_mount_options_out; } From 45976c01b7be338efc9d3c911293491a981ed87a Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 18 Jan 2013 16:38:43 +0000 Subject: [PATCH 529/553] ARM: at91/at91-pinctrl documentation: fix typo and add some details The relation between PIN_BANK numbers and pio letters wasn't made very clear. Signed-off-by: Richard Genoud Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- .../devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index 3a268127b054..bc50899e0c81 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -81,7 +81,8 @@ PA31 TXD4 Required properties for pin configuration node: - atmel,pins: 4 integers array, represents a group of pins mux and config setting. The format is atmel,pins = . - The PERIPH 0 means gpio. + The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B... + PIN_BANK 0 is pioA, PIN_BANK 1 is pioB... Bits used for CONFIG: PULL_UP (1 << 0): indicate this pin need a pull up. @@ -126,7 +127,7 @@ pinctrl@fffff400 { pinctrl_dbgu: dbgu-0 { atmel,pins = <1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x1>; /* PB15 periph with pullup */ + 1 15 0x1 0x1>; /* PB15 periph A with pullup */ }; }; }; From c89cec3a4037f4aebf948d0f9c984c4823478c66 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 18 Jan 2013 16:41:21 +0000 Subject: [PATCH 530/553] ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)arts The PIN_BANK 3 is for PDxx pins, not PCxx pins. And PIN_BANK 1 is for PBxx, not PIN_BANK 0. Signed-off-by: Richard Genoud Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9x5.dtsi | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 3a47cf952146..e9c42908da88 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -154,12 +154,12 @@ pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <3 27 0x3 0x0>; /* PC27 periph C */ + <2 27 0x3 0x0>; /* PC27 periph C */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <3 28 0x3 0x0>; /* PC28 periph C */ + <2 28 0x3 0x0>; /* PC28 periph C */ }; }; @@ -172,46 +172,46 @@ pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <0 0 0x2 0x0>; /* PB0 periph B */ + <1 0 0x2 0x0>; /* PB0 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <0 1 0x2 0x0>; /* PB1 periph B */ + <1 1 0x2 0x0>; /* PB1 periph B */ }; }; usart3 { pinctrl_uart3: usart3-0 { atmel,pins = - <3 23 0x2 0x1 /* PC22 periph B with pullup */ - 3 23 0x2 0x0>; /* PC23 periph B */ + <2 23 0x2 0x1 /* PC22 periph B with pullup */ + 2 23 0x2 0x0>; /* PC23 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <3 24 0x2 0x0>; /* PC24 periph B */ + <2 24 0x2 0x0>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <3 25 0x2 0x0>; /* PC25 periph B */ + <2 25 0x2 0x0>; /* PC25 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <3 8 0x3 0x0 /* PC8 periph C */ - 3 9 0x3 0x1>; /* PC9 periph C with pullup */ + <2 8 0x3 0x0 /* PC8 periph C */ + 2 9 0x3 0x1>; /* PC9 periph C with pullup */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <3 16 0x3 0x0 /* PC16 periph C */ - 3 17 0x3 0x1>; /* PC17 periph C with pullup */ + <2 16 0x3 0x0 /* PC16 periph C */ + 2 17 0x3 0x1>; /* PC17 periph C with pullup */ }; }; From 1bab02ec1b9353ac928b8fe57d8e26012930c8b2 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 18 Jan 2013 16:42:28 +0000 Subject: [PATCH 531/553] ARM: at91/at91sam9x5 DTS: add SCK USART pins The SCK pins where missing in usarts pinctrl. Signed-off-by: Richard Genoud Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9x5.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index e9c42908da88..cb711a5f2503 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -143,6 +143,11 @@ atmel,pins = <0 3 0x1 0x0>; /* PA3 periph A */ }; + + pinctrl_usart0_sck: usart0_sck-0 { + atmel,pins = + <0 4 0x1 0x0>; /* PA4 periph A */ + }; }; usart1 { @@ -161,6 +166,11 @@ atmel,pins = <2 28 0x3 0x0>; /* PC28 periph C */ }; + + pinctrl_usart1_sck: usart1_sck-0 { + atmel,pins = + <2 28 0x3 0x0>; /* PC29 periph C */ + }; }; usart2 { @@ -179,6 +189,11 @@ atmel,pins = <1 1 0x2 0x0>; /* PB1 periph B */ }; + + pinctrl_usart2_sck: usart2_sck-0 { + atmel,pins = + <1 2 0x2 0x0>; /* PB2 periph B */ + }; }; usart3 { @@ -197,6 +212,11 @@ atmel,pins = <2 25 0x2 0x0>; /* PC25 periph B */ }; + + pinctrl_usart3_sck: usart3_sck-0 { + atmel,pins = + <2 26 0x2 0x0>; /* PC26 periph B */ + }; }; uart0 { From 334c9e8d6d05be132792a855dcc637773d44cad3 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Tue, 4 Dec 2012 18:10:56 +0000 Subject: [PATCH 532/553] ARM: at91: fix gpios on i2c-gpio for RM9200 DT Signed-off-by: Joachim Eastwood Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91rm9200.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index e154f242c680..222047f1ece9 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -336,8 +336,8 @@ i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ + gpios = <&pioA 25 0 /* sda */ + &pioA 26 0 /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; From 36224d0fe0f34cdde66a381708853ebadeac799c Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 23 Dec 2012 18:07:49 +0000 Subject: [PATCH 533/553] ARM: at91: rm9200: remake the BGA as default version Make BGA as the default version as we are supposed to just have to specify when we use the PQFP version. Issue was existing since commit: 3e90772 (ARM: at91: fix at91rm9200 soc subtype handling). Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: stable [v3.3] Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/setup.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 9ee866ce0478..4b678478cf95 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -105,6 +105,8 @@ static void __init soc_detect(u32 dbgu_base) switch (socid) { case ARCH_ID_AT91RM9200: at91_soc_initdata.type = AT91_SOC_RM9200; + if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE) + at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; at91_boot_soc = at91rm9200_soc; break; From b45c998ea79224b5f8ac718d9be55cacd17fab18 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 13 Dec 2012 14:03:08 +0000 Subject: [PATCH 534/553] ARM: at91/dts: add macb mii pinctrl config for kizbox This patch overrides default macb pinctrl config defined in at91sam9260.dtsi (pinctrl_macb_rmii) with kizbox board config (pinctrl_macb_rmii + pinctrl_macb_rmii_mii_alt). Signed-off-by: Boris BREZILLON Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/kizbox.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts index e8814fe0e277..b4dc3ed9a3ec 100644 --- a/arch/arm/boot/dts/kizbox.dts +++ b/arch/arm/boot/dts/kizbox.dts @@ -48,6 +48,8 @@ macb0: ethernet@fffc4000 { phy-mode = "mii"; + pinctrl-0 = <&pinctrl_macb_rmii + &pinctrl_macb_rmii_mii_alt>; status = "okay"; }; From 2e06e92c758b768baaacc061aafa7f710b74ea02 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 23 Jan 2013 10:03:23 +0100 Subject: [PATCH 535/553] ARM: at91/at91_dt_defconfig: remove memory specification to cmdline No need for this cmdline option as we are using DT. Moreover this defconfig is targeted to multiple SoC/boards: this option was nonsense. Reported-by: Josh Wu Signed-off-by: Nicolas Ferre --- arch/arm/configs/at91_dt_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index b175577d7abb..a353ff60a20e 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -31,7 +31,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" +CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" CONFIG_KEXEC=y CONFIG_AUTO_ZRELADDR=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set From 581d6299746ed264bcddc48a611343cedd10ba77 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 23 Jan 2013 10:06:46 +0100 Subject: [PATCH 536/553] ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfig Reported-by: Josh Wu Signed-off-by: Nicolas Ferre --- arch/arm/configs/at91_dt_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index a353ff60a20e..1ea959019fcd 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -19,6 +19,7 @@ CONFIG_SOC_AT91SAM9260=y CONFIG_SOC_AT91SAM9263=y CONFIG_SOC_AT91SAM9G45=y CONFIG_SOC_AT91SAM9X5=y +CONFIG_SOC_AT91SAM9N12=y CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_TIMER_HZ=128 From 8461c2f6fdd3ef0b26f931d561435df8cae2a9a5 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Wed, 23 Jan 2013 09:50:02 +0100 Subject: [PATCH 537/553] ARM: at91/dts: correct comment in at91sam9x5.dtsi for mii Concerning pinctrl_macb0_rmii_mii, values were okay, but not comments. Signed-off-by: Douglas Gilbert Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9x5.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index cb711a5f2503..8ecca6948d81 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -260,14 +260,14 @@ pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { atmel,pins = - <1 8 0x1 0x0 /* PA8 periph A */ - 1 11 0x1 0x0 /* PA11 periph A */ - 1 12 0x1 0x0 /* PA12 periph A */ - 1 13 0x1 0x0 /* PA13 periph A */ - 1 14 0x1 0x0 /* PA14 periph A */ - 1 15 0x1 0x0 /* PA15 periph A */ - 1 16 0x1 0x0 /* PA16 periph A */ - 1 17 0x1 0x0>; /* PA17 periph A */ + <1 8 0x1 0x0 /* PB8 periph A */ + 1 11 0x1 0x0 /* PB11 periph A */ + 1 12 0x1 0x0 /* PB12 periph A */ + 1 13 0x1 0x0 /* PB13 periph A */ + 1 14 0x1 0x0 /* PB14 periph A */ + 1 15 0x1 0x0 /* PB15 periph A */ + 1 16 0x1 0x0 /* PB16 periph A */ + 1 17 0x1 0x0>; /* PB17 periph A */ }; }; From 31614bb89b102570367fc7428dc029b8d7fc615a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 23 Jan 2013 15:58:40 +0100 Subject: [PATCH 538/553] ALSA: hda - Fix inconsistent pin states after resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit [26a6cb6c: ALSA: hda - Implement a poll loop for jacks as a module parameter] introduced the polling jack detection code, but it also moved the call of snd_hda_jack_set_dirty_all() in the resume path after resume/init ops call. This caused a regression when the jack state has been changed during power-down (e.g. in the power save mode). Since the driver doesn't probe the new jack state but keeps using the cached value due to no dirty flag, the pin state remains also as if the jack is still plugged. The fix is simply moving snd_hda_jack_set_dirty_all() to the original position. Reported-by: Manolo Díaz Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index b8fb0a5adb9b..822df971972c 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3654,6 +3654,7 @@ static void hda_call_codec_resume(struct hda_codec *codec) hda_set_power_state(codec, AC_PWRST_D0); restore_shutup_pins(codec); hda_exec_init_verbs(codec); + snd_hda_jack_set_dirty_all(codec); if (codec->patch_ops.resume) codec->patch_ops.resume(codec); else { @@ -3665,10 +3666,8 @@ static void hda_call_codec_resume(struct hda_codec *codec) if (codec->jackpoll_interval) hda_jackpoll_work(&codec->jackpoll_work.work); - else { - snd_hda_jack_set_dirty_all(codec); + else snd_hda_jack_report_sync(codec); - } codec->in_pm = 0; snd_hda_power_down(codec); /* flag down before returning */ From 6d26b3a187467299851e758f60121a2a71a7962d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 23 Jan 2013 14:38:16 +0000 Subject: [PATCH 539/553] MAINTAINERS: remove me Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 -- 1 file changed, 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3105c4868c4e..4e734ed187e4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6585,9 +6585,7 @@ F: drivers/media/platform/s3c-camif/ F: include/media/s3c_camif.h SERIAL DRIVERS -M: Alan Cox L: linux-serial@vger.kernel.org -S: Maintained F: drivers/tty/serial SYNOPSYS DESIGNWARE DMAC DRIVER From dba63b2f733ebfd89bbb15e8fe8ca10fd3871a7f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 23 Jan 2013 13:26:15 -0500 Subject: [PATCH 540/553] USB: EHCI: fix build error in ehci-mxc This patch (as1643b) fixes a build error in ehci-hcd when compiling for ARM with allmodconfig: drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition drivers/usb/host/ehci-mxc.c:280:31: warning: 'ehci_mxc_driver' defined but not used [-Wunused-variable] drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition The fix is to convert ehci-mxc over to the new "ehci-hcd is a library" scheme so that it can coexist peacefully with the ehci-platform driver. As part of the conversion the ehci_mxc_priv data structure, which was allocated dynamically, is now placed where it belongs: in the private area at the end of struct ehci_hcd. Signed-off-by: Alan Stern Tested-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 2 +- drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-hcd.c | 6 +- drivers/usb/host/ehci-mxc.c | 120 +++++++++++++++--------------------- 4 files changed, 53 insertions(+), 76 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index d6bb128ce21e..3a21c5d683c0 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -148,7 +148,7 @@ config USB_EHCI_FSL Variation of ARC USB block used in some Freescale chips. config USB_EHCI_MXC - bool "Support for Freescale i.MX on-chip EHCI USB controller" + tristate "Support for Freescale i.MX on-chip EHCI USB controller" depends on USB_EHCI_HCD && ARCH_MXC select USB_EHCI_ROOT_HUB_TT ---help--- diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 1eb4c3006e9e..001fbff2fdef 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_PCI) += pci-quirks.o obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o +obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index d09ff8f294fe..09537b2f1002 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1246,11 +1246,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_fsl_driver #endif -#ifdef CONFIG_USB_EHCI_MXC -#include "ehci-mxc.c" -#define PLATFORM_DRIVER ehci_mxc_driver -#endif - #ifdef CONFIG_USB_EHCI_SH #include "ehci-sh.c" #define PLATFORM_DRIVER ehci_hcd_sh_driver @@ -1349,6 +1344,7 @@ MODULE_LICENSE ("GPL"); #if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \ !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \ !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \ + !IS_ENABLED(CONFIG_USB_EHCI_MXC) && \ !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ !defined(OF_PLATFORM_DRIVER) && \ diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index ec7f5d2c90de..dedb80bb8d40 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -17,75 +17,38 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include +#include +#include #include #include #include #include #include #include +#include +#include #include #include +#include "ehci.h" + +#define DRIVER_DESC "Freescale On-Chip EHCI Host driver" + +static const char hcd_name[] = "ehci-mxc"; + #define ULPI_VIEWPORT_OFFSET 0x170 struct ehci_mxc_priv { struct clk *usbclk, *ahbclk, *phyclk; - struct usb_hcd *hcd; }; -/* called during probe() after chip reset completes */ -static int ehci_mxc_setup(struct usb_hcd *hcd) -{ - hcd->has_tt = 1; +static struct hc_driver __read_mostly ehci_mxc_hc_driver; - return ehci_setup(hcd); -} - -static const struct hc_driver ehci_mxc_hc_driver = { - .description = hcd_name, - .product_desc = "Freescale On-Chip EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_USB2 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .reset = ehci_mxc_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +static const struct ehci_driver_overrides ehci_mxc_overrides __initdata = { + .extra_priv_size = sizeof(struct ehci_mxc_priv), }; static int ehci_mxc_drv_probe(struct platform_device *pdev) @@ -112,12 +75,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) if (!hcd) return -ENOMEM; - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) { - ret = -ENOMEM; - goto err_alloc; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "Found HC with no register addr. Check setup!\n"); @@ -135,6 +92,10 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) goto err_alloc; } + hcd->has_tt = 1; + ehci = hcd_to_ehci(hcd); + priv = (struct ehci_mxc_priv *) ehci->priv; + /* enable clocks */ priv->usbclk = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(priv->usbclk)) { @@ -169,8 +130,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) mdelay(10); } - ehci = hcd_to_ehci(hcd); - /* EHCI registers start at offset 0x100 */ ehci->caps = hcd->regs + 0x100; ehci->regs = hcd->regs + 0x100 + @@ -198,8 +157,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) } } - priv->hcd = hcd; - platform_set_drvdata(pdev, priv); + platform_set_drvdata(pdev, hcd); ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) @@ -244,8 +202,11 @@ err_alloc: static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) { struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data; - struct ehci_mxc_priv *priv = platform_get_drvdata(pdev); - struct usb_hcd *hcd = priv->hcd; + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct ehci_mxc_priv *priv = (struct ehci_mxc_priv *) ehci->priv; + + usb_remove_hcd(hcd); if (pdata && pdata->exit) pdata->exit(pdev); @@ -253,23 +214,20 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) if (pdata->otg) usb_phy_shutdown(pdata->otg); - usb_remove_hcd(hcd); - usb_put_hcd(hcd); - platform_set_drvdata(pdev, NULL); - clk_disable_unprepare(priv->usbclk); clk_disable_unprepare(priv->ahbclk); if (priv->phyclk) clk_disable_unprepare(priv->phyclk); + usb_put_hcd(hcd); + platform_set_drvdata(pdev, NULL); return 0; } static void ehci_mxc_drv_shutdown(struct platform_device *pdev) { - struct ehci_mxc_priv *priv = platform_get_drvdata(pdev); - struct usb_hcd *hcd = priv->hcd; + struct usb_hcd *hcd = platform_get_drvdata(pdev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); @@ -279,9 +237,31 @@ MODULE_ALIAS("platform:mxc-ehci"); static struct platform_driver ehci_mxc_driver = { .probe = ehci_mxc_drv_probe, - .remove = __exit_p(ehci_mxc_drv_remove), + .remove = ehci_mxc_drv_remove, .shutdown = ehci_mxc_drv_shutdown, .driver = { .name = "mxc-ehci", }, }; + +static int __init ehci_mxc_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ehci_init_driver(&ehci_mxc_hc_driver, &ehci_mxc_overrides); + return platform_driver_register(&ehci_mxc_driver); +} +module_init(ehci_mxc_init); + +static void __exit ehci_mxc_cleanup(void) +{ + platform_driver_unregister(&ehci_mxc_driver); +} +module_exit(ehci_mxc_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Sascha Hauer"); +MODULE_LICENSE("GPL"); From 5e30bbb723415fb94a098e314d1908a39a7e50a2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 23 Jan 2013 15:45:23 -0800 Subject: [PATCH 541/553] MAINTAINERS: Someone needs to watch over the serial drivers Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 4e734ed187e4..8ae709e34523 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6585,7 +6585,9 @@ F: drivers/media/platform/s3c-camif/ F: include/media/s3c_camif.h SERIAL DRIVERS +M: Greg Kroah-Hartman L: linux-serial@vger.kernel.org +S: Maintained F: drivers/tty/serial SYNOPSYS DESIGNWARE DMAC DRIVER From 1585defb4ceca98b12bd6fba6802c22e77e172bb Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Tue, 22 Jan 2013 10:56:40 +0000 Subject: [PATCH 542/553] ARM: vexpress: extend the MPIDR range used for pen release check In ARM multi-cluster systems the MPIDR affinity level 0 cannot be used as a single cpu identifier, affinity levels 1 and 2 must be taken into account as well. This patch extends the MPIDR usage to affinity levels 1 and 2 in versatile secondary cores start up code in order to compare the passed pen_release value with the full-blown affinity mask. Signed-off-by: Lorenzo Pieralisi Signed-off-by: Liviu Dudau Acked-by: Nicolas Pitre Signed-off-by: Pawel Moll --- arch/arm/plat-versatile/headsmp.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S index dd703ef09b8d..b178d44e9eaa 100644 --- a/arch/arm/plat-versatile/headsmp.S +++ b/arch/arm/plat-versatile/headsmp.S @@ -20,7 +20,7 @@ */ ENTRY(versatile_secondary_startup) mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 + bic r0, #0xff000000 adr r4, 1f ldmia r4, {r5, r6} sub r4, r4, r5 From ab838bc9c2b9b3afc64d92928dfae9e09fa5b467 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Thu, 24 Jan 2013 11:48:54 +0000 Subject: [PATCH 543/553] ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree As the kernel is able to cope with multiple clusters, uncomment the A7 cores in the Device Tree for V2P-CA15_A7 tile, making all 5 cores available to the user. Signed-off-by: Pawel Moll --- arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 1fc405a9ecfb..cf8071ad22d5 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -45,7 +45,6 @@ reg = <1>; }; -/* A7s disabled till big.LITTLE patches are available... cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -63,7 +62,6 @@ compatible = "arm,cortex-a7"; reg = <0x102>; }; -*/ }; memory@80000000 { From 52666298aebe5e9ab28a773ee61d2ce81fa097bb Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Tue, 27 Nov 2012 16:48:50 +0000 Subject: [PATCH 544/553] mfd: vexpress-sysreg: Don't skip initialization on probe The vexpress-sysreg driver does not have to be initialized early, when the platform doesn't require this. Unfortunately in such case it wasn't initialized correctly - master site lookup and config bridge registration were missing. Fixed now. Signed-off-by: Pawel Moll --- drivers/mfd/vexpress-sysreg.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index e5d8f63b252a..77048b18439e 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -313,19 +313,11 @@ static void vexpress_sysreg_config_complete(unsigned long data) } -void __init vexpress_sysreg_early_init(void __iomem *base) +void __init vexpress_sysreg_setup(struct device_node *node) { - struct device_node *node = of_find_compatible_node(NULL, NULL, - "arm,vexpress-sysreg"); - - if (node) - base = of_iomap(node, 0); - - if (WARN_ON(!base)) + if (WARN_ON(!vexpress_sysreg_base)) return; - vexpress_sysreg_base = base; - if (readl(vexpress_sysreg_base + SYS_MISC) & SYS_MISC_MASTERSITE) vexpress_master_site = VEXPRESS_SITE_DB2; else @@ -336,9 +328,23 @@ void __init vexpress_sysreg_early_init(void __iomem *base) WARN_ON(!vexpress_sysreg_config_bridge); } +void __init vexpress_sysreg_early_init(void __iomem *base) +{ + vexpress_sysreg_base = base; + vexpress_sysreg_setup(NULL); +} + void __init vexpress_sysreg_of_early_init(void) { - vexpress_sysreg_early_init(NULL); + struct device_node *node = of_find_compatible_node(NULL, NULL, + "arm,vexpress-sysreg"); + + if (node) { + vexpress_sysreg_base = of_iomap(node, 0); + vexpress_sysreg_setup(node); + } else { + pr_info("vexpress-sysreg: No Device Tree node found."); + } } @@ -426,9 +432,11 @@ static int vexpress_sysreg_probe(struct platform_device *pdev) return -EBUSY; } - if (!vexpress_sysreg_base) + if (!vexpress_sysreg_base) { vexpress_sysreg_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + vexpress_sysreg_setup(pdev->dev.of_node); + } if (!vexpress_sysreg_base) { dev_err(&pdev->dev, "Failed to obtain base address!\n"); From 201a90389424d6771d24fc5d72f7e34cb4a8f967 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 24 Jan 2013 12:02:07 -0500 Subject: [PATCH 545/553] Btrfs: do not allow logged extents to be merged or removed We drop the extent map tree lock while we're logging extents, so somebody could come in and merge another extent into this one and screw up our logging, or they could even remove us from the list which would keep us from logging the extent or freeing our ref on it, so we need to make sure to not clear LOGGING until after the extent is logged, and then we can merge it to adjacent extents. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/extent_map.c | 13 ++++++++++++- fs/btrfs/extent_map.h | 1 + fs/btrfs/tree-log.c | 5 +++-- 3 files changed, 16 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c index fff2c28497b6..ed88f5ee4bea 100644 --- a/fs/btrfs/extent_map.c +++ b/fs/btrfs/extent_map.c @@ -171,6 +171,10 @@ static int mergable_maps(struct extent_map *prev, struct extent_map *next) if (test_bit(EXTENT_FLAG_COMPRESSED, &prev->flags)) return 0; + if (test_bit(EXTENT_FLAG_LOGGING, &prev->flags) || + test_bit(EXTENT_FLAG_LOGGING, &next->flags)) + return 0; + if (extent_map_end(prev) == next->start && prev->flags == next->flags && prev->bdev == next->bdev && @@ -256,7 +260,8 @@ int unpin_extent_cache(struct extent_map_tree *tree, u64 start, u64 len, if (!em) goto out; - list_move(&em->list, &tree->modified_extents); + if (!test_bit(EXTENT_FLAG_LOGGING, &em->flags)) + list_move(&em->list, &tree->modified_extents); em->generation = gen; clear_bit(EXTENT_FLAG_PINNED, &em->flags); em->mod_start = em->start; @@ -281,6 +286,12 @@ out: } +void clear_em_logging(struct extent_map_tree *tree, struct extent_map *em) +{ + clear_bit(EXTENT_FLAG_LOGGING, &em->flags); + try_merge_map(tree, em); +} + /** * add_extent_mapping - add new extent map to the extent tree * @tree: tree to insert new map in diff --git a/fs/btrfs/extent_map.h b/fs/btrfs/extent_map.h index 922943ce29e8..c6598c89cff8 100644 --- a/fs/btrfs/extent_map.h +++ b/fs/btrfs/extent_map.h @@ -69,6 +69,7 @@ void free_extent_map(struct extent_map *em); int __init extent_map_init(void); void extent_map_exit(void); int unpin_extent_cache(struct extent_map_tree *tree, u64 start, u64 len, u64 gen); +void clear_em_logging(struct extent_map_tree *tree, struct extent_map *em); struct extent_map *search_extent_mapping(struct extent_map_tree *tree, u64 start, u64 len); #endif diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 83186c7e45d4..de8899b04d69 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -3410,13 +3410,13 @@ static int btrfs_log_changed_extents(struct btrfs_trans_handle *trans, em = list_entry(extents.next, struct extent_map, list); list_del_init(&em->list); - clear_bit(EXTENT_FLAG_LOGGING, &em->flags); /* * If we had an error we just need to delete everybody from our * private list. */ if (ret) { + clear_em_logging(tree, em); free_extent_map(em); continue; } @@ -3424,8 +3424,9 @@ static int btrfs_log_changed_extents(struct btrfs_trans_handle *trans, write_unlock(&tree->lock); ret = log_one_extent(trans, inode, root, em, path); - free_extent_map(em); write_lock(&tree->lock); + clear_em_logging(tree, em); + free_extent_map(em); } WARN_ON(!list_empty(&extents)); write_unlock(&tree->lock); From b0175117b9376a69978bbe80af26fb95dddbd53e Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 18 Dec 2012 11:39:19 -0500 Subject: [PATCH 546/553] Btrfs: fix panic when recovering tree log A user reported a BUG_ON(ret) that occured during tree log replay. Ret was -EAGAIN, so what I think happened is that we removed an extent that covered a bitmap entry and an extent entry. We remove the part from the bitmap and return -EAGAIN and then search for the next piece we want to remove, which happens to be an entire extent entry, so we just free the sucker and return. The problem is ret is still set to -EAGAIN so we trip the BUG_ON(). The user used btrfs-zero-log so I'm not 100% sure this is what happened so I've added a WARN_ON() to catch the other possibility. Thanks, Reported-by: Jan Steffens Signed-off-by: Josef Bacik --- fs/btrfs/free-space-cache.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 59ea2e4349c9..0be7a8742a43 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1862,11 +1862,13 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group, { struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *info; - int ret = 0; + int ret; + bool re_search = false; spin_lock(&ctl->tree_lock); again: + ret = 0; if (!bytes) goto out_lock; @@ -1879,17 +1881,17 @@ again: info = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 1, 0); if (!info) { - /* the tree logging code might be calling us before we - * have fully loaded the free space rbtree for this - * block group. So it is possible the entry won't - * be in the rbtree yet at all. The caching code - * will make sure not to put it in the rbtree if - * the logging code has pinned it. + /* + * If we found a partial bit of our free space in a + * bitmap but then couldn't find the other part this may + * be a problem, so WARN about it. */ + WARN_ON(re_search); goto out_lock; } } + re_search = false; if (!info->bitmap) { unlink_free_space(ctl, info); if (offset == info->offset) { @@ -1935,8 +1937,10 @@ again: } ret = remove_from_bitmap(ctl, info, &offset, &bytes); - if (ret == -EAGAIN) + if (ret == -EAGAIN) { + re_search = true; goto again; + } BUG_ON(ret); /* logic error */ out_lock: spin_unlock(&ctl->tree_lock); From 192000dda22e02225772e862b92e7c09e5a17d08 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Sun, 6 Jan 2013 03:38:22 +0000 Subject: [PATCH 547/553] Btrfs: use right range to find checksum for compressed extents For compressed extents, the range of checksum is covered by disk length, and the disk length is different with ram length, so we need to use disk length instead to get us the right checksum. Signed-off-by: Liu Bo Signed-off-by: Josef Bacik --- fs/btrfs/tree-log.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index de8899b04d69..9027bb1e7466 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -3357,6 +3357,11 @@ static int log_one_extent(struct btrfs_trans_handle *trans, if (skip_csum) return 0; + if (em->compress_type) { + csum_offset = 0; + csum_len = block_len; + } + /* block start is already adjusted for the file extent offset. */ ret = btrfs_lookup_csums_range(log->fs_info->csum_root, em->block_start + csum_offset, From e58dd74bccb4317e39e4b675bf9c6cd133608fac Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 22 Jan 2013 15:43:09 -0500 Subject: [PATCH 548/553] Btrfs: put csums on the right ordered extent I noticed a WARN_ON going off when adding csums because we were going over the amount of csum bytes that should have been allowed for an ordered extent. This is a leftover from when we used to hold the csums privately for direct io, but now we use the normal ordered sum stuff so we need to make sure and check if we've moved on to another extent so that the csums are added to the right extent. Without this we could end up with csums for bytenrs that don't have extents to cover them yet. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/file-item.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index bd38cef42358..94aa53b38721 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -460,8 +460,8 @@ int btrfs_csum_one_bio(struct btrfs_root *root, struct inode *inode, if (!contig) offset = page_offset(bvec->bv_page) + bvec->bv_offset; - if (!contig && (offset >= ordered->file_offset + ordered->len || - offset < ordered->file_offset)) { + if (offset >= ordered->file_offset + ordered->len || + offset < ordered->file_offset) { unsigned long bytes_left; sums->len = this_sum_bytes; this_sum_bytes = 0; From 8d25a086eb104297e3ba1fdd180b04cfaaa84797 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Tue, 15 Jan 2013 06:27:25 +0000 Subject: [PATCH 549/553] Btrfs: Add ACCESS_ONCE() to transaction->abort accesses We may access and update transaction->aborted on the different CPUs without lock, so we need ACCESS_ONCE() wrapper to prevent the compiler from creating unsolicited accesses and make sure we can get the right value. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik --- fs/btrfs/super.c | 2 +- fs/btrfs/transaction.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 99545df1b86c..d8982e9601d3 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -267,7 +267,7 @@ void __btrfs_abort_transaction(struct btrfs_trans_handle *trans, function, line, errstr); return; } - trans->transaction->aborted = errno; + ACCESS_ONCE(trans->transaction->aborted) = errno; __btrfs_std_error(root->fs_info, function, line, errno, NULL); } /* diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 87fac9a21ea5..0ef29611fade 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1468,7 +1468,8 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, goto cleanup_transaction; } - if (cur_trans->aborted) { + /* Stop the commit early if ->aborted is set */ + if (unlikely(ACCESS_ONCE(cur_trans->aborted))) { ret = cur_trans->aborted; goto cleanup_transaction; } From 2cba30f172afdfa00f3e844f42f21eb3b972d01c Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Tue, 15 Jan 2013 06:29:12 +0000 Subject: [PATCH 550/553] Btrfs: fix missed transaction->aborted check First, though the current transaction->aborted check can stop the commit early and avoid unnecessary operations, it is too early, and some transaction handles don't end, those handles may set transaction->aborted after the check. Second, when we commit the transaction, we will wake up some worker threads to flush the space cache and inode cache. Those threads also allocate some transaction handles and may set transaction->aborted if some serious error happens. So we need more check for ->aborted when committing the transaction. Fix it. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik --- fs/btrfs/transaction.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 0ef29611fade..f15494699f3b 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1575,6 +1575,11 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, wait_event(cur_trans->writer_wait, atomic_read(&cur_trans->num_writers) == 1); + /* ->aborted might be set after the previous check, so check it */ + if (unlikely(ACCESS_ONCE(cur_trans->aborted))) { + ret = cur_trans->aborted; + goto cleanup_transaction; + } /* * the reloc mutex makes sure that we stop * the balancing code from coming in and moving @@ -1658,6 +1663,17 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, goto cleanup_transaction; } + /* + * The tasks which save the space cache and inode cache may also + * update ->aborted, check it. + */ + if (unlikely(ACCESS_ONCE(cur_trans->aborted))) { + ret = cur_trans->aborted; + mutex_unlock(&root->fs_info->tree_log_mutex); + mutex_unlock(&root->fs_info->reloc_mutex); + goto cleanup_transaction; + } + btrfs_prepare_extent_commit(trans, root); cur_trans = root->fs_info->running_transaction; From c9f01bfe0ca411b4751d7fdbb9d602035ba52f75 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 16 Jan 2013 11:27:17 +0000 Subject: [PATCH 551/553] Btrfs: fix wrong max device number for single profile The max device number of single profile is 1, not 0 (0 means 'as many as possible'). Fix it. Cc: Liu Bo Signed-off-by: Miao Xie Reviewed-by: Liu Bo Signed-off-by: Josef Bacik --- fs/btrfs/volumes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 469609838913..15f6efdf6463 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -3507,7 +3507,7 @@ struct btrfs_raid_attr btrfs_raid_array[BTRFS_NR_RAID_TYPES] = { { 1, 1, 2, 2, 2, 2 /* raid1 */ }, { 1, 2, 1, 1, 1, 2 /* dup */ }, { 1, 1, 0, 2, 1, 1 /* raid0 */ }, - { 1, 1, 0, 1, 1, 1 /* single */ }, + { 1, 1, 1, 1, 1, 1 /* single */ }, }; static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans, From 1eafa6c73791e4f312324ddad9cbcaf6a1b6052b Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Tue, 22 Jan 2013 10:49:00 +0000 Subject: [PATCH 552/553] Btrfs: fix repeated delalloc work allocation btrfs_start_delalloc_inodes() locks the delalloc_inodes list, fetches the first inode, unlocks the list, triggers btrfs_alloc_delalloc_work/ btrfs_queue_worker for this inode, and then it locks the list, checks the head of the list again. But because we don't delete the first inode that it deals with before, it will fetch the same inode. As a result, this function allocates a huge amount of btrfs_delalloc_work structures, and OOM happens. Fix this problem by splice this delalloc list. Reported-by: Alex Lyakas Signed-off-by: Miao Xie Signed-off-by: Josef Bacik --- fs/btrfs/inode.c | 55 ++++++++++++++++++++++++++++++++++++------------ 1 file changed, 41 insertions(+), 14 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 9bc6c40b182d..ca7ace7b7b52 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -7585,41 +7585,61 @@ void btrfs_wait_and_free_delalloc_work(struct btrfs_delalloc_work *work) */ int btrfs_start_delalloc_inodes(struct btrfs_root *root, int delay_iput) { - struct list_head *head = &root->fs_info->delalloc_inodes; struct btrfs_inode *binode; struct inode *inode; struct btrfs_delalloc_work *work, *next; struct list_head works; + struct list_head splice; int ret = 0; if (root->fs_info->sb->s_flags & MS_RDONLY) return -EROFS; INIT_LIST_HEAD(&works); - + INIT_LIST_HEAD(&splice); +again: spin_lock(&root->fs_info->delalloc_lock); - while (!list_empty(head)) { - binode = list_entry(head->next, struct btrfs_inode, + list_splice_init(&root->fs_info->delalloc_inodes, &splice); + while (!list_empty(&splice)) { + binode = list_entry(splice.next, struct btrfs_inode, delalloc_inodes); + + list_del_init(&binode->delalloc_inodes); + inode = igrab(&binode->vfs_inode); if (!inode) - list_del_init(&binode->delalloc_inodes); + continue; + + list_add_tail(&binode->delalloc_inodes, + &root->fs_info->delalloc_inodes); spin_unlock(&root->fs_info->delalloc_lock); - if (inode) { - work = btrfs_alloc_delalloc_work(inode, 0, delay_iput); - if (!work) { - ret = -ENOMEM; - goto out; - } - list_add_tail(&work->list, &works); - btrfs_queue_worker(&root->fs_info->flush_workers, - &work->work); + + work = btrfs_alloc_delalloc_work(inode, 0, delay_iput); + if (unlikely(!work)) { + ret = -ENOMEM; + goto out; } + list_add_tail(&work->list, &works); + btrfs_queue_worker(&root->fs_info->flush_workers, + &work->work); + cond_resched(); spin_lock(&root->fs_info->delalloc_lock); } spin_unlock(&root->fs_info->delalloc_lock); + list_for_each_entry_safe(work, next, &works, list) { + list_del_init(&work->list); + btrfs_wait_and_free_delalloc_work(work); + } + + spin_lock(&root->fs_info->delalloc_lock); + if (!list_empty(&root->fs_info->delalloc_inodes)) { + spin_unlock(&root->fs_info->delalloc_lock); + goto again; + } + spin_unlock(&root->fs_info->delalloc_lock); + /* the filemap_flush will queue IO into the worker threads, but * we have to make sure the IO is actually started and that * ordered extents get created before we return @@ -7632,11 +7652,18 @@ int btrfs_start_delalloc_inodes(struct btrfs_root *root, int delay_iput) atomic_read(&root->fs_info->async_delalloc_pages) == 0)); } atomic_dec(&root->fs_info->async_submit_draining); + return 0; out: list_for_each_entry_safe(work, next, &works, list) { list_del_init(&work->list); btrfs_wait_and_free_delalloc_work(work); } + + if (!list_empty_careful(&splice)) { + spin_lock(&root->fs_info->delalloc_lock); + list_splice_tail(&splice, &root->fs_info->delalloc_inodes); + spin_unlock(&root->fs_info->delalloc_lock); + } return ret; } From 949db153b6466c6f7cad5a427ecea94985927311 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 25 Jan 2013 11:57:28 -0800 Subject: [PATCH 553/553] Linux 3.8-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 2cd4c6be44f2..2d3c92c774fb 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 8 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Terrified Chipmunk # *DOCUMENTATION*