[NET]: move config options out to individual protocols

Move the protocol specific config options out to the specific protocols.
With this change net/Kconfig now starts to become readable and serve as a
good basis for further re-structuring.

The menu structure is left almost intact, except that indention is
fixed in most cases. Most visible are the INET changes where several
"depends on INET" are replaced with a single ifdef INET / endif pair.

Several new files were created to accomplish this change - they are
small but serve the purpose that config options are now distributed
out where they belongs.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Sam Ravnborg 2005-07-11 21:13:56 -07:00 committed by David S. Miller
parent d5950b4355
commit 6a2e9b738c
18 changed files with 474 additions and 452 deletions

View File

@ -1,6 +1,33 @@
# #
# Appletalk driver configuration # Appletalk driver configuration
# #
config ATALK
tristate "Appletalk protocol support"
select LLC
---help---
AppleTalk is the protocol that Apple computers can use to communicate
on a network. If your Linux box is connected to such a network and you
wish to connect to it, say Y. You will need to use the netatalk package
so that your Linux box can act as a print and file server for Macs as
well as access AppleTalk printers. Check out
<http://www.zettabyte.net/netatalk/> on the WWW for details.
EtherTalk is the name used for AppleTalk over Ethernet and the
cheaper and slower LocalTalk is AppleTalk over a proprietary Apple
network using serial links. EtherTalk and LocalTalk are fully
supported by Linux.
General information about how to connect Linux, Windows machines and
Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. The
NET-3-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, contains valuable
information as well.
To compile this driver as a module, choose M here: the module will be
called appletalk. You almost certainly want to compile it as a
module so you can restart your AppleTalk stack without rebooting
your machine. I hear that the GNU boycott of Apple is over, so
even politically correct people are allowed to say Y here.
config DEV_APPLETALK config DEV_APPLETALK
bool "Appletalk interfaces support" bool "Appletalk interfaces support"
depends on ATALK depends on ATALK

19
net/8021q/Kconfig Normal file
View File

@ -0,0 +1,19 @@
#
# Configuration for 802.1Q VLAN support
#
config VLAN_8021Q
tristate "802.1Q VLAN Support"
---help---
Select this and you will be able to create 802.1Q VLAN interfaces
on your ethernet interfaces. 802.1Q VLAN supports almost
everything a regular ethernet interface does, including
firewalling, bridging, and of course IP traffic. You will need
the 'vconfig' tool from the VLAN project in order to effectively
use VLANs. See the VLAN web page for more information:
<http://www.candelatech.com/~greear/vlan.html>
To compile this code as a module, choose M here: the module
will be called 8021q.
If unsure, say N.

View File

@ -22,57 +22,14 @@ config NET
recommended to read the NET-HOWTO, available from recommended to read the NET-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. <http://www.tldp.org/docs.html#howto>.
# Make sure that all config symbols are dependent on NET
if NET
menu "Networking options" menu "Networking options"
depends on NET
config PACKET source "net/packet/Kconfig"
tristate "Packet socket" source "net/unix/Kconfig"
---help--- source "net/xfrm/Kconfig"
The Packet protocol is used by applications which communicate
directly with network devices without an intermediate network
protocol implemented in the kernel, e.g. tcpdump. If you want them
to work, choose Y.
To compile this driver as a module, choose M here: the module will
be called af_packet.
If unsure, say Y.
config PACKET_MMAP
bool "Packet socket: mmapped IO"
depends on PACKET
help
If you say Y here, the Packet protocol driver will use an IO
mechanism that results in faster communication.
If unsure, say N.
config UNIX
tristate "Unix domain sockets"
---help---
If you say Y here, you will include support for Unix domain sockets;
sockets are the standard Unix mechanism for establishing and
accessing network connections. Many commonly used programs such as
the X Window system and syslog use these sockets even if your
machine is not connected to any network. Unless you are working on
an embedded system or something similar, you therefore definitely
want to say Y here.
To compile this driver as a module, choose M here: the module will be
called unix. Note that several important services won't work
correctly if you say M here and then neglect to load the module.
Say Y unless you know what you are doing.
config NET_KEY
tristate "PF_KEY sockets"
select XFRM
---help---
PF_KEYv2 socket family, compatible to KAME ones.
They are required if you are going to use IPsec tools ported
from KAME.
Say Y unless you know what you are doing.
config INET config INET
bool "TCP/IP networking" bool "TCP/IP networking"
@ -96,30 +53,12 @@ config INET
Short answer: say Y. Short answer: say Y.
if INET
source "net/ipv4/Kconfig" source "net/ipv4/Kconfig"
# IPv6 as module will cause a CRASH if you try to unload it
config IPV6
tristate "The IPv6 protocol"
depends on INET
default m
select CRYPTO if IPV6_PRIVACY
select CRYPTO_MD5 if IPV6_PRIVACY
---help---
This is complemental support for the IP version 6.
You will still be able to do traditional IPv4 networking as well.
For general information about IPv6, see
<http://playground.sun.com/pub/ipng/html/ipng-main.html>.
For Linux IPv6 development information, see <http://www.linux-ipv6.org>.
For specific information about IPv6 under Linux, read the HOWTO at
<http://www.bieringer.de/linux/IPv6/>.
To compile this protocol support as a module, choose M here: the
module will be called ipv6.
source "net/ipv6/Kconfig" source "net/ipv6/Kconfig"
endif # if INET
menuconfig NETFILTER menuconfig NETFILTER
bool "Network packet filtering (replaces ipchains)" bool "Network packet filtering (replaces ipchains)"
---help--- ---help---
@ -208,269 +147,16 @@ source "net/bridge/netfilter/Kconfig"
endif endif
config XFRM
bool
depends on NET
source "net/xfrm/Kconfig"
source "net/sctp/Kconfig" source "net/sctp/Kconfig"
source "net/atm/Kconfig"
config ATM source "net/bridge/Kconfig"
tristate "Asynchronous Transfer Mode (ATM) (EXPERIMENTAL)" source "net/8021q/Kconfig"
depends on EXPERIMENTAL
---help---
ATM is a high-speed networking technology for Local Area Networks
and Wide Area Networks. It uses a fixed packet size and is
connection oriented, allowing for the negotiation of minimum
bandwidth requirements.
In order to participate in an ATM network, your Linux box needs an
ATM networking card. If you have that, say Y here and to the driver
of your ATM card below.
Note that you need a set of user-space programs to actually make use
of ATM. See the file <file:Documentation/networking/atm.txt> for
further details.
config ATM_CLIP
tristate "Classical IP over ATM (EXPERIMENTAL)"
depends on ATM && INET
help
Classical IP over ATM for PVCs and SVCs, supporting InARP and
ATMARP. If you want to communication with other IP hosts on your ATM
network, you will typically either say Y here or to "LAN Emulation
(LANE)" below.
config ATM_CLIP_NO_ICMP
bool "Do NOT send ICMP if no neighbour (EXPERIMENTAL)"
depends on ATM_CLIP
help
Normally, an "ICMP host unreachable" message is sent if a neighbour
cannot be reached because there is no VC to it in the kernel's
ATMARP table. This may cause problems when ATMARP table entries are
briefly removed during revalidation. If you say Y here, packets to
such neighbours are silently discarded instead.
config ATM_LANE
tristate "LAN Emulation (LANE) support (EXPERIMENTAL)"
depends on ATM
help
LAN Emulation emulates services of existing LANs across an ATM
network. Besides operating as a normal ATM end station client, Linux
LANE client can also act as an proxy client bridging packets between
ELAN and Ethernet segments. You need LANE if you want to try MPOA.
config ATM_MPOA
tristate "Multi-Protocol Over ATM (MPOA) support (EXPERIMENTAL)"
depends on ATM && INET && ATM_LANE!=n
help
Multi-Protocol Over ATM allows ATM edge devices such as routers,
bridges and ATM attached hosts establish direct ATM VCs across
subnetwork boundaries. These shortcut connections bypass routers
enhancing overall network performance.
config ATM_BR2684
tristate "RFC1483/2684 Bridged protocols"
depends on ATM && INET
help
ATM PVCs can carry ethernet PDUs according to RFC2684 (formerly 1483)
This device will act like an ethernet from the kernels point of view,
with the traffic being carried by ATM PVCs (currently 1 PVC/device).
This is sometimes used over DSL lines. If in doubt, say N.
config ATM_BR2684_IPFILTER
bool "Per-VC IP filter kludge"
depends on ATM_BR2684
help
This is an experimental mechanism for users who need to terminate a
large number of IP-only vcc's. Do not enable this unless you are sure
you know what you are doing.
config BRIDGE
tristate "802.1d Ethernet Bridging"
---help---
If you say Y here, then your Linux box will be able to act as an
Ethernet bridge, which means that the different Ethernet segments it
is connected to will appear as one Ethernet to the participants.
Several such bridges can work together to create even larger
networks of Ethernets using the IEEE 802.1 spanning tree algorithm.
As this is a standard, Linux bridges will cooperate properly with
other third party bridge products.
In order to use the Ethernet bridge, you'll need the bridge
configuration tools; see <file:Documentation/networking/bridge.txt>
for location. Please read the Bridge mini-HOWTO for more
information.
If you enable iptables support along with the bridge support then you
turn your bridge into a bridging IP firewall.
iptables will then see the IP packets being bridged, so you need to
take this into account when setting up your firewall rules.
Enabling arptables support when bridging will let arptables see
bridged ARP traffic in the arptables FORWARD chain.
To compile this code as a module, choose M here: the module
will be called bridge.
If unsure, say N.
config VLAN_8021Q
tristate "802.1Q VLAN Support"
---help---
Select this and you will be able to create 802.1Q VLAN interfaces
on your ethernet interfaces. 802.1Q VLAN supports almost
everything a regular ethernet interface does, including
firewalling, bridging, and of course IP traffic. You will need
the 'vconfig' tool from the VLAN project in order to effectively
use VLANs. See the VLAN web page for more information:
<http://www.candelatech.com/~greear/vlan.html>
To compile this code as a module, choose M here: the module
will be called 8021q.
If unsure, say N.
config DECNET
tristate "DECnet Support"
---help---
The DECnet networking protocol was used in many products made by
Digital (now Compaq). It provides reliable stream and sequenced
packet communications over which run a variety of services similar
to those which run over TCP/IP.
To find some tools to use with the kernel layer support, please
look at Patrick Caulfield's web site:
<http://linux-decnet.sourceforge.net/>.
More detailed documentation is available in
<file:Documentation/networking/decnet.txt>.
Be sure to say Y to "/proc file system support" and "Sysctl support"
below when using DECnet, since you will need sysctl support to aid
in configuration at run time.
The DECnet code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called decnet.
source "net/decnet/Kconfig" source "net/decnet/Kconfig"
source "net/llc/Kconfig" source "net/llc/Kconfig"
config IPX
tristate "The IPX protocol"
select LLC
---help---
This is support for the Novell networking protocol, IPX, commonly
used for local networks of Windows machines. You need it if you
want to access Novell NetWare file or print servers using the Linux
Novell client ncpfs (available from
<ftp://platan.vc.cvut.cz/pub/linux/ncpfs/>) or from
within the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO,
available from <http://www.tldp.org/docs.html#howto>). In order
to do the former, you'll also have to say Y to "NCP file system
support", below.
IPX is similar in scope to IP, while SPX, which runs on top of IPX,
is similar to TCP. There is also experimental support for SPX in
Linux (see "SPX networking", below).
To turn your Linux box into a fully featured NetWare file server and
IPX router, say Y here and fetch either lwared from
<ftp://ibiblio.org/pub/Linux/system/network/daemons/> or
mars_nwe from <ftp://www.compu-art.de/mars_nwe/>. For more
information, read the IPX-HOWTO available from
<http://www.tldp.org/docs.html#howto>.
General information about how to connect Linux, Windows machines and
Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
The IPX driver would enlarge your kernel by about 16 KB. To compile
this driver as a module, choose M here: the module will be called ipx.
Unless you want to integrate your Linux box with a local Novell
network, say N.
source "net/ipx/Kconfig" source "net/ipx/Kconfig"
config ATALK
tristate "Appletalk protocol support"
select LLC
---help---
AppleTalk is the protocol that Apple computers can use to communicate
on a network. If your Linux box is connected to such a network and you
wish to connect to it, say Y. You will need to use the netatalk package
so that your Linux box can act as a print and file server for Macs as
well as access AppleTalk printers. Check out
<http://www.zettabyte.net/netatalk/> on the WWW for details.
EtherTalk is the name used for AppleTalk over Ethernet and the
cheaper and slower LocalTalk is AppleTalk over a proprietary Apple
network using serial links. EtherTalk and LocalTalk are fully
supported by Linux.
General information about how to connect Linux, Windows machines and
Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. The
NET-3-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, contains valuable
information as well.
To compile this driver as a module, choose M here: the module will be
called appletalk. You almost certainly want to compile it as a
module so you can restart your AppleTalk stack without rebooting
your machine. I hear that the GNU boycott of Apple is over, so
even politically correct people are allowed to say Y here.
source "drivers/net/appletalk/Kconfig" source "drivers/net/appletalk/Kconfig"
source "net/x25/Kconfig"
config X25 source "net/lapb/Kconfig"
tristate "CCITT X.25 Packet Layer (EXPERIMENTAL)"
depends on EXPERIMENTAL
---help---
X.25 is a set of standardized network protocols, similar in scope to
frame relay; the one physical line from your box to the X.25 network
entry point can carry several logical point-to-point connections
(called "virtual circuits") to other computers connected to the X.25
network. Governments, banks, and other organizations tend to use it
to connect to each other or to form Wide Area Networks (WANs). Many
countries have public X.25 networks. X.25 consists of two
protocols: the higher level Packet Layer Protocol (PLP) (say Y here
if you want that) and the lower level data link layer protocol LAPB
(say Y to "LAPB Data Link Driver" below if you want that).
You can read more about X.25 at <http://www.sangoma.com/x25.htm> and
<http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/cx25.htm>.
Information about X.25 for Linux is contained in the files
<file:Documentation/networking/x25.txt> and
<file:Documentation/networking/x25-iface.txt>.
One connects to an X.25 network either with a dedicated network card
using the X.21 protocol (not yet supported by Linux) or one can do
X.25 over a standard telephone line using an ordinary modem (say Y
to "X.25 async driver" below) or over Ethernet using an ordinary
Ethernet card and the LAPB over Ethernet (say Y to "LAPB Data Link
Driver" and "LAPB over Ethernet driver" below).
To compile this driver as a module, choose M here: the module
will be called x25. If unsure, say N.
config LAPB
tristate "LAPB Data Link Driver (EXPERIMENTAL)"
depends on EXPERIMENTAL
---help---
Link Access Procedure, Balanced (LAPB) is the data link layer (i.e.
the lower) part of the X.25 protocol. It offers a reliable
connection service to exchange data frames with one other host, and
it is used to transport higher level protocols (mostly X.25 Packet
Layer, the higher part of X.25, but others are possible as well).
Usually, LAPB is used with specialized X.21 network cards, but Linux
currently supports LAPB only over Ethernet connections. If you want
to use LAPB connections over Ethernet, say Y here and to "LAPB over
Ethernet driver" below. Read
<file:Documentation/networking/lapb-module.txt> for technical
details.
To compile this driver as a module, choose M here: the
module will be called lapb. If unsure, say N.
config NET_DIVERT config NET_DIVERT
bool "Frame Diverter (EXPERIMENTAL)" bool "Frame Diverter (EXPERIMENTAL)"
@ -498,107 +184,10 @@ config NET_DIVERT
If unsure, say N. If unsure, say N.
config ECONET source "net/econet/Kconfig"
tristate "Acorn Econet/AUN protocols (EXPERIMENTAL)" source "net/wanrouter/Kconfig"
depends on EXPERIMENTAL && INET
---help---
Econet is a fairly old and slow networking protocol mainly used by
Acorn computers to access file and print servers. It uses native
Econet network cards. AUN is an implementation of the higher level
parts of Econet that runs over ordinary Ethernet connections, on
top of the UDP packet protocol, which in turn runs on top of the
Internet protocol IP.
If you say Y here, you can choose with the next two options whether
to send Econet/AUN traffic over a UDP Ethernet connection or over
a native Econet network card.
To compile this driver as a module, choose M here: the module
will be called econet.
config ECONET_AUNUDP
bool "AUN over UDP"
depends on ECONET
help
Say Y here if you want to send Econet/AUN traffic over a UDP
connection (UDP is a packet based protocol that runs on top of the
Internet protocol IP) using an ordinary Ethernet network card.
config ECONET_NATIVE
bool "Native Econet"
depends on ECONET
help
Say Y here if you have a native Econet network card installed in
your computer.
config WAN_ROUTER
tristate "WAN router"
depends on EXPERIMENTAL
---help---
Wide Area Networks (WANs), such as X.25, frame relay and leased
lines, are used to interconnect Local Area Networks (LANs) over vast
distances with data transfer rates significantly higher than those
achievable with commonly used asynchronous modem connections.
Usually, a quite expensive external device called a `WAN router' is
needed to connect to a WAN.
As an alternative, WAN routing can be built into the Linux kernel.
With relatively inexpensive WAN interface cards available on the
market, a perfectly usable router can be built for less than half
the price of an external router. If you have one of those cards and
wish to use your Linux box as a WAN router, say Y here and also to
the WAN driver for your card, below. You will then need the
wan-tools package which is available from <ftp://ftp.sangoma.com/>.
Read <file:Documentation/networking/wan-router.txt> for more
information.
To compile WAN routing support as a module, choose M here: the
module will be called wanrouter.
If unsure, say N.
menu "QoS and/or fair queueing"
config NET_SCHED
bool "QoS and/or fair queueing"
---help---
When the kernel has several packets to send out over a network
device, it has to decide which ones to send first, which ones to
delay, and which ones to drop. This is the job of the packet
scheduler, and several different algorithms for how to do this
"fairly" have been proposed.
If you say N here, you will get the standard packet scheduler, which
is a FIFO (first come, first served). If you say Y here, you will be
able to choose from among several alternative algorithms which can
then be attached to different network devices. This is useful for
example if some of your network devices are real time devices that
need a certain minimum data flow rate, or if you need to limit the
maximum data flow rate for traffic which matches specified criteria.
This code is considered to be experimental.
To administer these schedulers, you'll need the user-level utilities
from the package iproute2+tc at <ftp://ftp.tux.org/pub/net/ip-routing/>.
That package also contains some documentation; for more, check out
<http://snafu.freedom.org/linux2.2/iproute-notes.html>.
This Quality of Service (QoS) support will enable you to use
Differentiated Services (diffserv) and Resource Reservation Protocol
(RSVP) on your Linux router if you also say Y to "QoS support",
"Packet classifier API" and to some classifiers below. Documentation
and software is at <http://diffserv.sourceforge.net/>.
If you say Y here and to "/proc file system" below, you will be able
to read status information about packet schedulers from the file
/proc/net/psched.
The available schedulers are listed in the following questions; you
can say Y to as many as you like. If unsure, say N now.
source "net/sched/Kconfig" source "net/sched/Kconfig"
endmenu
menu "Network testing" menu "Network testing"
config NET_PKTGEN config NET_PKTGEN
@ -637,10 +226,9 @@ config NET_POLL_CONTROLLER
def_bool NETPOLL def_bool NETPOLL
source "net/ax25/Kconfig" source "net/ax25/Kconfig"
source "net/irda/Kconfig" source "net/irda/Kconfig"
source "net/bluetooth/Kconfig" source "net/bluetooth/Kconfig"
endif # if NET
endmenu # Networking endmenu # Networking

74
net/atm/Kconfig Normal file
View File

@ -0,0 +1,74 @@
#
# Asynchronous Transfer Mode (ATM) (EXPERIMENTAL)
#
config ATM
tristate "Asynchronous Transfer Mode (ATM) (EXPERIMENTAL)"
depends on EXPERIMENTAL
---help---
ATM is a high-speed networking technology for Local Area Networks
and Wide Area Networks. It uses a fixed packet size and is
connection oriented, allowing for the negotiation of minimum
bandwidth requirements.
In order to participate in an ATM network, your Linux box needs an
ATM networking card. If you have that, say Y here and to the driver
of your ATM card below.
Note that you need a set of user-space programs to actually make use
of ATM. See the file <file:Documentation/networking/atm.txt> for
further details.
config ATM_CLIP
tristate "Classical IP over ATM (EXPERIMENTAL)"
depends on ATM && INET
help
Classical IP over ATM for PVCs and SVCs, supporting InARP and
ATMARP. If you want to communication with other IP hosts on your ATM
network, you will typically either say Y here or to "LAN Emulation
(LANE)" below.
config ATM_CLIP_NO_ICMP
bool "Do NOT send ICMP if no neighbour (EXPERIMENTAL)"
depends on ATM_CLIP
help
Normally, an "ICMP host unreachable" message is sent if a neighbour
cannot be reached because there is no VC to it in the kernel's
ATMARP table. This may cause problems when ATMARP table entries are
briefly removed during revalidation. If you say Y here, packets to
such neighbours are silently discarded instead.
config ATM_LANE
tristate "LAN Emulation (LANE) support (EXPERIMENTAL)"
depends on ATM
help
LAN Emulation emulates services of existing LANs across an ATM
network. Besides operating as a normal ATM end station client, Linux
LANE client can also act as an proxy client bridging packets between
ELAN and Ethernet segments. You need LANE if you want to try MPOA.
config ATM_MPOA
tristate "Multi-Protocol Over ATM (MPOA) support (EXPERIMENTAL)"
depends on ATM && INET && ATM_LANE!=n
help
Multi-Protocol Over ATM allows ATM edge devices such as routers,
bridges and ATM attached hosts establish direct ATM VCs across
subnetwork boundaries. These shortcut connections bypass routers
enhancing overall network performance.
config ATM_BR2684
tristate "RFC1483/2684 Bridged protocols"
depends on ATM && INET
help
ATM PVCs can carry ethernet PDUs according to rfc2684 (formerly 1483)
This device will act like an ethernet from the kernels point of view,
with the traffic being carried by ATM PVCs (currently 1 PVC/device).
This is sometimes used over DSL lines. If in doubt, say N.
config ATM_BR2684_IPFILTER
bool "Per-VC IP filter kludge"
depends on ATM_BR2684
help
This is an experimental mechanism for users who need to terminating a
large number of IP-only vcc's. Do not enable this unless you are sure
you know what you are doing.

31
net/bridge/Kconfig Normal file
View File

@ -0,0 +1,31 @@
#
# 802.1d Ethernet Bridging
#
config BRIDGE
tristate "802.1d Ethernet Bridging"
---help---
If you say Y here, then your Linux box will be able to act as an
Ethernet bridge, which means that the different Ethernet segments it
is connected to will appear as one Ethernet to the participants.
Several such bridges can work together to create even larger
networks of Ethernets using the IEEE 802.1 spanning tree algorithm.
As this is a standard, Linux bridges will cooperate properly with
other third party bridge products.
In order to use the Ethernet bridge, you'll need the bridge
configuration tools; see <file:Documentation/networking/bridge.txt>
for location. Please read the Bridge mini-HOWTO for more
information.
If you enable iptables support along with the bridge support then you
turn your bridge into a bridging IP firewall.
iptables will then see the IP packets being bridged, so you need to
take this into account when setting up your firewall rules.
Enabling arptables support when bridging will let arptables see
bridged ARP traffic in the arptables FORWARD chain.
To compile this code as a module, choose M here: the module
will be called bridge.
If unsure, say N.

View File

@ -1,6 +1,29 @@
# #
# DECnet configuration # DECnet configuration
# #
config DECNET
tristate "DECnet Support"
---help---
The DECnet networking protocol was used in many products made by
Digital (now Compaq). It provides reliable stream and sequenced
packet communications over which run a variety of services similar
to those which run over TCP/IP.
To find some tools to use with the kernel layer support, please
look at Patrick Caulfield's web site:
<http://linux-decnet.sourceforge.net/>.
More detailed documentation is available in
<file:Documentation/networking/decnet.txt>.
Be sure to say Y to "/proc file system support" and "Sysctl support"
below when using DECnet, since you will need sysctl support to aid
in configuration at run time.
The DECnet code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called decnet.
config DECNET_ROUTER config DECNET_ROUTER
bool "DECnet: router support (EXPERIMENTAL)" bool "DECnet: router support (EXPERIMENTAL)"
depends on DECNET && EXPERIMENTAL depends on DECNET && EXPERIMENTAL

36
net/econet/Kconfig Normal file
View File

@ -0,0 +1,36 @@
#
# Acorn Econet/AUN protocols
#
config ECONET
tristate "Acorn Econet/AUN protocols (EXPERIMENTAL)"
depends on EXPERIMENTAL && INET
---help---
Econet is a fairly old and slow networking protocol mainly used by
Acorn computers to access file and print servers. It uses native
Econet network cards. AUN is an implementation of the higher level
parts of Econet that runs over ordinary Ethernet connections, on
top of the UDP packet protocol, which in turn runs on top of the
Internet protocol IP.
If you say Y here, you can choose with the next two options whether
to send Econet/AUN traffic over a UDP Ethernet connection or over
a native Econet network card.
To compile this driver as a module, choose M here: the module
will be called econet.
config ECONET_AUNUDP
bool "AUN over UDP"
depends on ECONET
help
Say Y here if you want to send Econet/AUN traffic over a UDP
connection (UDP is a packet based protocol that runs on top of the
Internet protocol IP) using an ordinary Ethernet network card.
config ECONET_NATIVE
bool "Native Econet"
depends on ECONET
help
Say Y here if you have a native Econet network card installed in
your computer.

View File

@ -3,7 +3,6 @@
# #
config IP_MULTICAST config IP_MULTICAST
bool "IP: multicasting" bool "IP: multicasting"
depends on INET
help help
This is code for addressing several networked computers at once, This is code for addressing several networked computers at once,
enlarging your kernel by about 2 KB. You need multicasting if you enlarging your kernel by about 2 KB. You need multicasting if you
@ -17,7 +16,6 @@ config IP_MULTICAST
config IP_ADVANCED_ROUTER config IP_ADVANCED_ROUTER
bool "IP: advanced router" bool "IP: advanced router"
depends on INET
---help--- ---help---
If you intend to run your Linux box mostly as a router, i.e. as a If you intend to run your Linux box mostly as a router, i.e. as a
computer that forwards and redistributes network packets, say Y; you computer that forwards and redistributes network packets, say Y; you
@ -183,7 +181,6 @@ config IP_ROUTE_VERBOSE
config IP_PNP config IP_PNP
bool "IP: kernel level autoconfiguration" bool "IP: kernel level autoconfiguration"
depends on INET
help help
This enables automatic configuration of IP addresses of devices and This enables automatic configuration of IP addresses of devices and
of the routing table during kernel boot, based on either information of the routing table during kernel boot, based on either information
@ -242,7 +239,6 @@ config IP_PNP_RARP
# bool ' IP: ARP support' CONFIG_IP_PNP_ARP # bool ' IP: ARP support' CONFIG_IP_PNP_ARP
config NET_IPIP config NET_IPIP
tristate "IP: tunneling" tristate "IP: tunneling"
depends on INET
select INET_TUNNEL select INET_TUNNEL
---help--- ---help---
Tunneling means encapsulating data of one protocol type within Tunneling means encapsulating data of one protocol type within
@ -260,7 +256,6 @@ config NET_IPIP
config NET_IPGRE config NET_IPGRE
tristate "IP: GRE tunnels over IP" tristate "IP: GRE tunnels over IP"
depends on INET
select XFRM select XFRM
help help
Tunneling means encapsulating data of one protocol type within Tunneling means encapsulating data of one protocol type within
@ -319,7 +314,7 @@ config IP_PIMSM_V2
config ARPD config ARPD
bool "IP: ARP daemon support (EXPERIMENTAL)" bool "IP: ARP daemon support (EXPERIMENTAL)"
depends on INET && EXPERIMENTAL depends on EXPERIMENTAL
---help--- ---help---
Normally, the kernel maintains an internal cache which maps IP Normally, the kernel maintains an internal cache which maps IP
addresses to hardware addresses on the local network, so that addresses to hardware addresses on the local network, so that
@ -344,7 +339,6 @@ config ARPD
config SYN_COOKIES config SYN_COOKIES
bool "IP: TCP syncookie support (disabled per default)" bool "IP: TCP syncookie support (disabled per default)"
depends on INET
---help--- ---help---
Normal TCP/IP networking is open to an attack known as "SYN Normal TCP/IP networking is open to an attack known as "SYN
flooding". This denial-of-service attack prevents legitimate remote flooding". This denial-of-service attack prevents legitimate remote
@ -381,7 +375,6 @@ config SYN_COOKIES
config INET_AH config INET_AH
tristate "IP: AH transformation" tristate "IP: AH transformation"
depends on INET
select XFRM select XFRM
select CRYPTO select CRYPTO
select CRYPTO_HMAC select CRYPTO_HMAC
@ -394,7 +387,6 @@ config INET_AH
config INET_ESP config INET_ESP
tristate "IP: ESP transformation" tristate "IP: ESP transformation"
depends on INET
select XFRM select XFRM
select CRYPTO select CRYPTO
select CRYPTO_HMAC select CRYPTO_HMAC
@ -408,7 +400,6 @@ config INET_ESP
config INET_IPCOMP config INET_IPCOMP
tristate "IP: IPComp transformation" tristate "IP: IPComp transformation"
depends on INET
select XFRM select XFRM
select INET_TUNNEL select INET_TUNNEL
select CRYPTO select CRYPTO
@ -421,7 +412,6 @@ config INET_IPCOMP
config INET_TUNNEL config INET_TUNNEL
tristate "IP: tunnel transformation" tristate "IP: tunnel transformation"
depends on INET
select XFRM select XFRM
---help--- ---help---
Support for generic IP tunnel transformation, which is required by Support for generic IP tunnel transformation, which is required by
@ -431,7 +421,6 @@ config INET_TUNNEL
config IP_TCPDIAG config IP_TCPDIAG
tristate "IP: TCP socket monitoring interface" tristate "IP: TCP socket monitoring interface"
depends on INET
default y default y
---help--- ---help---
Support for TCP socket monitoring interface used by native Linux Support for TCP socket monitoring interface used by native Linux
@ -447,7 +436,6 @@ config IP_TCPDIAG_IPV6
config TCP_CONG_ADVANCED config TCP_CONG_ADVANCED
bool "TCP: advanced congestion control" bool "TCP: advanced congestion control"
depends on INET
---help--- ---help---
Support for selection of various TCP congestion control Support for selection of various TCP congestion control
modules. modules.
@ -463,7 +451,6 @@ menu "TCP congestion control"
config TCP_CONG_BIC config TCP_CONG_BIC
tristate "Binary Increase Congestion (BIC) control" tristate "Binary Increase Congestion (BIC) control"
depends on INET
default y default y
---help--- ---help---
BIC-TCP is a sender-side only change that ensures a linear RTT BIC-TCP is a sender-side only change that ensures a linear RTT
@ -478,7 +465,6 @@ config TCP_CONG_BIC
config TCP_CONG_WESTWOOD config TCP_CONG_WESTWOOD
tristate "TCP Westwood+" tristate "TCP Westwood+"
depends on INET
default m default m
---help--- ---help---
TCP Westwood+ is a sender-side only modification of the TCP Reno TCP Westwood+ is a sender-side only modification of the TCP Reno
@ -493,7 +479,6 @@ config TCP_CONG_WESTWOOD
config TCP_CONG_HTCP config TCP_CONG_HTCP
tristate "H-TCP" tristate "H-TCP"
depends on INET
default m default m
---help--- ---help---
H-TCP is a send-side only modifications of the TCP Reno H-TCP is a send-side only modifications of the TCP Reno
@ -505,7 +490,7 @@ config TCP_CONG_HTCP
config TCP_CONG_HSTCP config TCP_CONG_HSTCP
tristate "High Speed TCP" tristate "High Speed TCP"
depends on INET && EXPERIMENTAL depends on EXPERIMENTAL
default n default n
---help--- ---help---
Sally Floyd's High Speed TCP (RFC 3649) congestion control. Sally Floyd's High Speed TCP (RFC 3649) congestion control.
@ -516,7 +501,7 @@ config TCP_CONG_HSTCP
config TCP_CONG_HYBLA config TCP_CONG_HYBLA
tristate "TCP-Hybla congestion control algorithm" tristate "TCP-Hybla congestion control algorithm"
depends on INET && EXPERIMENTAL depends on EXPERIMENTAL
default n default n
---help--- ---help---
TCP-Hybla is a sender-side only change that eliminates penalization of TCP-Hybla is a sender-side only change that eliminates penalization of
@ -526,7 +511,7 @@ config TCP_CONG_HYBLA
config TCP_CONG_VEGAS config TCP_CONG_VEGAS
tristate "TCP Vegas" tristate "TCP Vegas"
depends on INET && EXPERIMENTAL depends on EXPERIMENTAL
default n default n
---help--- ---help---
TCP Vegas is a sender-side only change to TCP that anticipates TCP Vegas is a sender-side only change to TCP that anticipates
@ -537,7 +522,7 @@ config TCP_CONG_VEGAS
config TCP_CONG_SCALABLE config TCP_CONG_SCALABLE
tristate "Scalable TCP" tristate "Scalable TCP"
depends on INET && EXPERIMENTAL depends on EXPERIMENTAL
default n default n
---help--- ---help---
Scalable TCP is a sender-side only change to TCP which uses a Scalable TCP is a sender-side only change to TCP which uses a

View File

@ -2,11 +2,11 @@
# IP Virtual Server configuration # IP Virtual Server configuration
# #
menu "IP: Virtual Server Configuration" menu "IP: Virtual Server Configuration"
depends on INET && NETFILTER depends on NETFILTER
config IP_VS config IP_VS
tristate "IP virtual server support (EXPERIMENTAL)" tristate "IP virtual server support (EXPERIMENTAL)"
depends on INET && NETFILTER depends on NETFILTER
---help--- ---help---
IP Virtual Server support will let you build a high-performance IP Virtual Server support will let you build a high-performance
virtual server based on cluster of two or more real servers. This virtual server based on cluster of two or more real servers. This

View File

@ -1,6 +1,26 @@
# #
# IPv6 configuration # IPv6 configuration
# #
# IPv6 as module will cause a CRASH if you try to unload it
config IPV6
tristate "The IPv6 protocol"
default m
select CRYPTO if IPV6_PRIVACY
select CRYPTO_MD5 if IPV6_PRIVACY
---help---
This is complemental support for the IP version 6.
You will still be able to do traditional IPv4 networking as well.
For general information about IPv6, see
<http://playground.sun.com/pub/ipng/html/ipng-main.html>.
For Linux IPv6 development information, see <http://www.linux-ipv6.org>.
For specific information about IPv6 under Linux, read the HOWTO at
<http://www.bieringer.de/linux/IPv6/>.
To compile this protocol support as a module, choose M here: the
module will be called ipv6.
config IPV6_PRIVACY config IPV6_PRIVACY
bool "IPv6: Privacy Extensions (RFC 3041) support" bool "IPv6: Privacy Extensions (RFC 3041) support"
depends on IPV6 depends on IPV6

View File

@ -1,6 +1,39 @@
# #
# IPX configuration # IPX configuration
# #
config IPX
tristate "The IPX protocol"
select LLC
---help---
This is support for the Novell networking protocol, IPX, commonly
used for local networks of Windows machines. You need it if you
want to access Novell NetWare file or print servers using the Linux
Novell client ncpfs (available from
<ftp://platan.vc.cvut.cz/pub/linux/ncpfs/>) or from
within the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO,
available from <http://www.tldp.org/docs.html#howto>). In order
to do the former, you'll also have to say Y to "NCP file system
support", below.
IPX is similar in scope to IP, while SPX, which runs on top of IPX,
is similar to TCP. There is also experimental support for SPX in
Linux (see "SPX networking", below).
To turn your Linux box into a fully featured NetWare file server and
IPX router, say Y here and fetch either lwared from
<ftp://ibiblio.org/pub/Linux/system/network/daemons/> or
mars_nwe from <ftp://www.compu-art.de/mars_nwe/>. For more
information, read the IPX-HOWTO available from
<http://www.tldp.org/docs.html#howto>.
General information about how to connect Linux, Windows machines and
Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
The IPX driver would enlarge your kernel by about 16 KB. To compile
this driver as a module, choose M here: the module will be called ipx.
Unless you want to integrate your Linux box with a local Novell
network, say N.
config IPX_INTERN config IPX_INTERN
bool "IPX: Full internal IPX network" bool "IPX: Full internal IPX network"
depends on IPX depends on IPX

22
net/lapb/Kconfig Normal file
View File

@ -0,0 +1,22 @@
#
# LAPB Data Link Drive
#
config LAPB
tristate "LAPB Data Link Driver (EXPERIMENTAL)"
depends on EXPERIMENTAL
---help---
Link Access Procedure, Balanced (LAPB) is the data link layer (i.e.
the lower) part of the X.25 protocol. It offers a reliable
connection service to exchange data frames with one other host, and
it is used to transport higher level protocols (mostly X.25 Packet
Layer, the higher part of X.25, but others are possible as well).
Usually, LAPB is used with specialized X.21 network cards, but Linux
currently supports LAPB only over Ethernet connections. If you want
to use LAPB connections over Ethernet, say Y here and to "LAPB over
Ethernet driver" below. Read
<file:Documentation/networking/lapb-module.txt> for technical
details.
To compile this driver as a module, choose M here: the
module will be called lapb. If unsure, say N.

26
net/packet/Kconfig Normal file
View File

@ -0,0 +1,26 @@
#
# Packet configuration
#
config PACKET
tristate "Packet socket"
---help---
The Packet protocol is used by applications which communicate
directly with network devices without an intermediate network
protocol implemented in the kernel, e.g. tcpdump. If you want them
to work, choose Y.
To compile this driver as a module, choose M here: the module will
be called af_packet.
If unsure, say Y.
config PACKET_MMAP
bool "Packet socket: mmapped IO"
depends on PACKET
help
If you say Y here, the Packet protocol driver will use an IO
mechanism that results in faster communication.
If unsure, say N.

View File

@ -1,6 +1,43 @@
# #
# Traffic control configuration. # Traffic control configuration.
# #
menuconfig NET_SCHED
bool "QoS and/or fair queueing"
---help---
When the kernel has several packets to send out over a network
device, it has to decide which ones to send first, which ones to
delay, and which ones to drop. This is the job of the packet
scheduler, and several different algorithms for how to do this
"fairly" have been proposed.
If you say N here, you will get the standard packet scheduler, which
is a FIFO (first come, first served). If you say Y here, you will be
able to choose from among several alternative algorithms which can
then be attached to different network devices. This is useful for
example if some of your network devices are real time devices that
need a certain minimum data flow rate, or if you need to limit the
maximum data flow rate for traffic which matches specified criteria.
This code is considered to be experimental.
To administer these schedulers, you'll need the user-level utilities
from the package iproute2+tc at <ftp://ftp.tux.org/pub/net/ip-routing/>.
That package also contains some documentation; for more, check out
<http://snafu.freedom.org/linux2.2/iproute-notes.html>.
This Quality of Service (QoS) support will enable you to use
Differentiated Services (diffserv) and Resource Reservation Protocol
(RSVP) on your Linux router if you also say Y to "QoS support",
"Packet classifier API" and to some classifiers below. Documentation
and software is at <http://diffserv.sourceforge.net/>.
If you say Y here and to "/proc file system" below, you will be able
to read status information about packet schedulers from the file
/proc/net/psched.
The available schedulers are listed in the following questions; you
can say Y to as many as you like. If unsure, say N now.
choice choice
prompt "Packet scheduler clock source" prompt "Packet scheduler clock source"
depends on NET_SCHED depends on NET_SCHED

21
net/unix/Kconfig Normal file
View File

@ -0,0 +1,21 @@
#
# Unix Domain Sockets
#
config UNIX
tristate "Unix domain sockets"
---help---
If you say Y here, you will include support for Unix domain sockets;
sockets are the standard Unix mechanism for establishing and
accessing network connections. Many commonly used programs such as
the X Window system and syslog use these sockets even if your
machine is not connected to any network. Unless you are working on
an embedded system or something similar, you therefore definitely
want to say Y here.
To compile this driver as a module, choose M here: the module will be
called unix. Note that several important services won't work
correctly if you say M here and then neglect to load the module.
Say Y unless you know what you are doing.

29
net/wanrouter/Kconfig Normal file
View File

@ -0,0 +1,29 @@
#
# Configuration for WAN router
#
config WAN_ROUTER
tristate "WAN router"
depends on EXPERIMENTAL
---help---
Wide Area Networks (WANs), such as X.25, frame relay and leased
lines, are used to interconnect Local Area Networks (LANs) over vast
distances with data transfer rates significantly higher than those
achievable with commonly used asynchronous modem connections.
Usually, a quite expensive external device called a `WAN router' is
needed to connect to a WAN.
As an alternative, WAN routing can be built into the Linux kernel.
With relatively inexpensive WAN interface cards available on the
market, a perfectly usable router can be built for less than half
the price of an external router. If you have one of those cards and
wish to use your Linux box as a WAN router, say Y here and also to
the WAN driver for your card, below. You will then need the
wan-tools package which is available from <ftp://ftp.sangoma.com/>.
Read <file:Documentation/networking/wan-router.txt> for more
information.
To compile WAN routing support as a module, choose M here: the
module will be called wanrouter.
If unsure, say N.

36
net/x25/Kconfig Normal file
View File

@ -0,0 +1,36 @@
#
# CCITT X.25 Packet Layer
#
config X25
tristate "CCITT X.25 Packet Layer (EXPERIMENTAL)"
depends on EXPERIMENTAL
---help---
X.25 is a set of standardized network protocols, similar in scope to
frame relay; the one physical line from your box to the X.25 network
entry point can carry several logical point-to-point connections
(called "virtual circuits") to other computers connected to the X.25
network. Governments, banks, and other organizations tend to use it
to connect to each other or to form Wide Area Networks (WANs). Many
countries have public X.25 networks. X.25 consists of two
protocols: the higher level Packet Layer Protocol (PLP) (say Y here
if you want that) and the lower level data link layer protocol LAPB
(say Y to "LAPB Data Link Driver" below if you want that).
You can read more about X.25 at <http://www.sangoma.com/x25.htm> and
<http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/cx25.htm>.
Information about X.25 for Linux is contained in the files
<file:Documentation/networking/x25.txt> and
<file:Documentation/networking/x25-iface.txt>.
One connects to an X.25 network either with a dedicated network card
using the X.21 protocol (not yet supported by Linux) or one can do
X.25 over a standard telephone line using an ordinary modem (say Y
to "X.25 async driver" below) or over Ethernet using an ordinary
Ethernet card and the LAPB over Ethernet (say Y to "LAPB Data Link
Driver" and "LAPB over Ethernet driver" below).
To compile this driver as a module, choose M here: the module
will be called x25. If unsure, say N.

View File

@ -1,6 +1,10 @@
# #
# XFRM configuration # XFRM configuration
# #
config XFRM
bool
depends on NET
config XFRM_USER config XFRM_USER
tristate "IPsec user configuration interface" tristate "IPsec user configuration interface"
depends on INET && XFRM depends on INET && XFRM
@ -10,3 +14,14 @@ config XFRM_USER
If unsure, say Y. If unsure, say Y.
config NET_KEY
tristate "PF_KEY sockets"
select XFRM
---help---
PF_KEYv2 socket family, compatible to KAME ones.
They are required if you are going to use IPsec tools ported
from KAME.
Say Y unless you know what you are doing.